Review of the patient positioning reproducibility in head-and-neck radiotherapy using Statistical Process Control.

PubMed

Moore, Sarah J; Herst, Patries M; Louwe, Robert J W

2018-05-01

A remarkable improvement in patient positioning was observed after the implementation of various process changes aiming to increase the consistency of patient positioning throughout the radiotherapy treatment chain. However, no tool was available to describe these changes over time in a standardised way. This study reports on the feasibility of Statistical Process Control (SPC) to highlight changes in patient positioning accuracy and facilitate correlation of these changes with the underlying process changes. Metrics were designed to quantify the systematic and random patient deformation as input for the SPC charts. These metrics were based on data obtained from multiple local ROI matches for 191 patients who were treated for head-and-neck cancer during the period 2011-2016. SPC highlighted a significant improvement in patient positioning that coincided with multiple intentional process changes. The observed improvements could be described as a combination of a reduction in outliers and a systematic improvement in the patient positioning accuracy of all patients. SPC is able to track changes in the reproducibility of patient positioning in head-and-neck radiation oncology, and distinguish between systematic and random process changes. Identification of process changes underlying these trends requires additional statistical analysis and seems only possible when the changes do not overlap in time. Copyright © 2018 Elsevier B.V. All rights reserved.

A retrospective analysis of the change in anti-malarial treatment policy: Peru.

PubMed

Williams, Holly Ann; Vincent-Mark, Arlene; Herrera, Yenni; Chang, O Jaime

2009-04-28

National malaria control programmes must deal with the complex process of changing national malaria treatment guidelines, often without guidance on the process of change. Selecting a replacement drug is only one issue in this process. There is a paucity of literature describing successful malaria treatment policy changes to help guide control programs through this process. To understand the wider context in which national malaria treatment guidelines were formulated in a specific country (Peru). Using qualitative methods (individual and focus group interviews, stakeholder analysis and a review of documents), a retrospective analysis of the process of change in Peru's anti-malarial treatment policy from the early 1990's to 2003 was completed. The decision to change Peru's policies resulted from increasing levels of anti-malarial drug resistance, as well as complaints from providers that the drugs were no longer working. The context of the change occurred in a time in which Peru was changing national governments, which created extreme challenges in moving the change process forward. Peru utilized a number of key strategies successfully to ensure that policy change would occur. This included a) having the process directed by a group who shared a common interest in malaria and who had long-established social and professional networks among themselves, b) engaging in collaborative teamwork among nationals and between nationals and international collaborators, c) respect for and inclusion of district-level staff in all phases of the process, d) reliance on high levels of technical and scientific knowledge, e) use of standardized protocols to collect data, and f) transparency. Although not perfectly or fully implemented by 2003, the change in malaria treatment policy in Peru occurred very quickly, as compared to other countries. They identified a problem, collected the data necessary to justify the change, utilized political will to their favor, approved the policy, and moved to improve malaria control in their country. As such, they offer an excellent example for other countries as they contemplate or embark on policy changes.

Applying Statistical Process Control to Clinical Data: An Illustration.

ERIC Educational Resources Information Center

Pfadt, Al; And Others

1992-01-01

Principles of statistical process control are applied to a clinical setting through the use of control charts to detect changes, as part of treatment planning and clinical decision-making processes. The logic of control chart analysis is derived from principles of statistical inference. Sample charts offer examples of evaluating baselines and…

Residual neural processing of musical sound features in adult cochlear implant users.

PubMed

Timm, Lydia; Vuust, Peter; Brattico, Elvira; Agrawal, Deepashri; Debener, Stefan; Büchner, Andreas; Dengler, Reinhard; Wittfoth, Matthias

2014-01-01

Auditory processing in general and music perception in particular are hampered in adult cochlear implant (CI) users. To examine the residual music perception skills and their underlying neural correlates in CI users implanted in adolescence or adulthood, we conducted an electrophysiological and behavioral study comparing adult CI users with normal-hearing age-matched controls (NH controls). We used a newly developed musical multi-feature paradigm, which makes it possible to test automatic auditory discrimination of six different types of sound feature changes inserted within a musical enriched setting lasting only 20 min. The presentation of stimuli did not require the participants' attention, allowing the study of the early automatic stage of feature processing in the auditory cortex. For the CI users, we obtained mismatch negativity (MMN) brain responses to five feature changes but not to changes of rhythm, whereas we obtained MMNs for all the feature changes in the NH controls. Furthermore, the MMNs to deviants of pitch of CI users were reduced in amplitude and later than those of NH controls for changes of pitch and guitar timber. No other group differences in MMN parameters were found to changes in intensity and saxophone timber. Furthermore, the MMNs in CI users reflected the behavioral scores from a respective discrimination task and were correlated with patients' age and speech intelligibility. Our results suggest that even though CI users are not performing at the same level as NH controls in neural discrimination of pitch-based features, they do possess potential neural abilities for music processing. However, CI users showed a disrupted ability to automatically discriminate rhythmic changes compared with controls. The current behavioral and MMN findings highlight the residual neural skills for music processing even in CI users who have been implanted in adolescence or adulthood. -Automatic brain responses to musical feature changes reflect the limitations of central auditory processing in adult Cochlear Implant users.-The brains of adult CI users automatically process sound features changes even when inserted in a musical context.-CI users show disrupted automatic discriminatory abilities for rhythm in the brain.-Our fast paradigm demonstrate residual musical abilities in the brains of adult CI users giving hope for their future rehabilitation.

Residual Neural Processing of Musical Sound Features in Adult Cochlear Implant Users

PubMed Central

Timm, Lydia; Vuust, Peter; Brattico, Elvira; Agrawal, Deepashri; Debener, Stefan; Büchner, Andreas; Dengler, Reinhard; Wittfoth, Matthias

2014-01-01

Auditory processing in general and music perception in particular are hampered in adult cochlear implant (CI) users. To examine the residual music perception skills and their underlying neural correlates in CI users implanted in adolescence or adulthood, we conducted an electrophysiological and behavioral study comparing adult CI users with normal-hearing age-matched controls (NH controls). We used a newly developed musical multi-feature paradigm, which makes it possible to test automatic auditory discrimination of six different types of sound feature changes inserted within a musical enriched setting lasting only 20 min. The presentation of stimuli did not require the participants’ attention, allowing the study of the early automatic stage of feature processing in the auditory cortex. For the CI users, we obtained mismatch negativity (MMN) brain responses to five feature changes but not to changes of rhythm, whereas we obtained MMNs for all the feature changes in the NH controls. Furthermore, the MMNs to deviants of pitch of CI users were reduced in amplitude and later than those of NH controls for changes of pitch and guitar timber. No other group differences in MMN parameters were found to changes in intensity and saxophone timber. Furthermore, the MMNs in CI users reflected the behavioral scores from a respective discrimination task and were correlated with patients’ age and speech intelligibility. Our results suggest that even though CI users are not performing at the same level as NH controls in neural discrimination of pitch-based features, they do possess potential neural abilities for music processing. However, CI users showed a disrupted ability to automatically discriminate rhythmic changes compared with controls. The current behavioral and MMN findings highlight the residual neural skills for music processing even in CI users who have been implanted in adolescence or adulthood. Highlights: -Automatic brain responses to musical feature changes reflect the limitations of central auditory processing in adult Cochlear Implant users.-The brains of adult CI users automatically process sound features changes even when inserted in a musical context.-CI users show disrupted automatic discriminatory abilities for rhythm in the brain.-Our fast paradigm demonstrate residual musical abilities in the brains of adult CI users giving hope for their future rehabilitation. PMID:24772074

WeaselBoard :

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mulder, John C.; Schwartz, Moses Daniel; Berg, Michael J.

2013-10-01

Critical infrastructures, such as electrical power plants and oil refineries, rely on programmable logic controllers (PLCs) to control essential processes. State of the art security cannot detect attacks on PLCs at the hardware or firmware level. This renders critical infrastructure control systems vulnerable to costly and dangerous attacks. WeaselBoard is a PLC backplane analysis system that connects directly to the PLC backplane to capture backplane communications between modules. WeaselBoard forwards inter-module traffic to an external analysis system that detects changes to process control settings, sensor values, module configuration information, firmware updates, and process control program (logic) updates. WeaselBoard provides zero-daymore » exploit detection for PLCs by detecting changes in the PLC and the process. This approach to PLC monitoring is protected under U.S. Patent Application 13/947,887.« less

40 CFR 62.14470 - When must I comply with this subpart if I plan to continue operation of my HMIWI?

Code of Federal Regulations, 2010 CFR

2010-07-01

... FOR DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Hospital/Medical/Infectious... air pollution control equipment or process changes such that the HMIWI is brought on line, and ensuring that all necessary process changes and air pollution control equipment are operating properly. (3...

40 CFR 62.14470 - When must I comply with this subpart if I plan to continue operation of my HMIWI?

Code of Federal Regulations, 2011 CFR

2011-07-01

... FOR DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Hospital/Medical/Infectious... air pollution control equipment or process changes such that the HMIWI is brought on line, and ensuring that all necessary process changes and air pollution control equipment are operating properly. (3...

Nutrition intervention group program based on preaction-stage-oriented change processes of the Transtheoretical Model promotes long-term reduction in dietary fat intake.

PubMed

Finckenor, M; Byrd-Bredbenner, C

2000-03-01

To develop and evaluate the long-term effectiveness of an intervention program, based on preaction-stage-oriented change processes of the Transtheoretical Model of Behavior Change, that could be delivered in a group setting to help participants lower dietary fat intake. An enhanced version of the nonequivalent control group experimental design was used. Entire sections of an undergraduate introductory nutrition science course were assigned to an experimental, pretest/posttest control, or posttest-only control group. Daily fat intake and stage of change of the experimental and pretest/posttest control groups were determined at the pretest and posttest and 1-year later at a follow-up test. Every 1 to 2 weeks during the study, stage of change of the experimental group was assessed. Daily fat intake of the experimental group was assessed at study midpoint. Daily fat intake and stage of change of the posttest-only control group was determined at the posttest. Pretest results were used to place participants of the experimental and pretest/posttest control groups in either the preaction stage (i.e., precontemplation, contemplation, or preparation) or the action/maintenance stage. The sample consisted of 38, 30, and 42 undergraduate students who were assigned to the experimental, pretest/posttest control, and posttest-only control groups, respectively. The experimental group participated in a group-based, dietary fat intake intervention that included a series of 11 lessons taught over a 14-week period. Each lesson was based on 1 or 2 of the preaction-stage-oriented change processes of the Transtheoretical Model. Data were evaluated to determine the effects of the intervention program on long-term dietary fat reduction and stage of change progression. Analysis of variance, repeated-measures analysis of variance, and paired t tests. For pretest and posttest dietary fat intake scores, stage and time were significant, and there was a significant time-by-stage interaction. Time was significant for pretest and posttest stage scores. Subjects in the preaction-stage experimental group significantly increased their mean stage of change and reduced their fat intake between the pretest and posttest; these changes persisted for 1 year. Pretest/posttest control group participants who began in a preaction stage also significantly increased their mean stage and reduced fat intake by the posttest, but these changes did not endure until the follow-up test. This intervention program produced an enduring, significant reduction in mean dietary fat consumption and a significant progression in mean stage of change of subjects in the experimental group who were in the preaction stage. It may be appropriate to design group interventions to use preaction stage processes rather than the more traditionally used action and maintenance stages change processes.

Model reduction in integrated controls-structures design

NASA Technical Reports Server (NTRS)

Maghami, Peiman G.

1993-01-01

It is the objective of this paper to present a model reduction technique developed for the integrated controls-structures design of flexible structures. Integrated controls-structures design problems are typically posed as nonlinear mathematical programming problems, where the design variables consist of both structural and control parameters. In the solution process, both structural and control design variables are constantly changing; therefore, the dynamic characteristics of the structure are also changing. This presents a problem in obtaining a reduced-order model for active control design and analysis which will be valid for all design points within the design space. In other words, the frequency and number of the significant modes of the structure (modes that should be included) may vary considerably throughout the design process. This is also true as the locations and/or masses of the sensors and actuators change. Moreover, since the number of design evaluations in the integrated design process could easily run into thousands, any feasible order-reduction method should not require model reduction analysis at every design iteration. In this paper a novel and efficient technique for model reduction in the integrated controls-structures design process, which addresses these issues, is presented.

76 FR 7629 - Interagency Notice of Change in Control

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-10

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision Interagency Notice of Change in Control... information collection displays a currently valid OMB control number. As part of the approval process, we... in Control. OMB Number: 1550-0032. Form Number: 1622. Description: The Regional Office must review...

Optimal feedback control successfully explains changes in neural modulations during experiments with brain-machine interfaces.

PubMed

Benyamini, Miri; Zacksenhouse, Miriam

2015-01-01

Recent experiments with brain-machine-interfaces (BMIs) indicate that the extent of neural modulations increased abruptly upon starting to operate the interface, and especially after the monkey stopped moving its hand. In contrast, neural modulations that are correlated with the kinematics of the movement remained relatively unchanged. Here we demonstrate that similar changes are produced by simulated neurons that encode the relevant signals generated by an optimal feedback controller during simulated BMI experiments. The optimal feedback controller relies on state estimation that integrates both visual and proprioceptive feedback with prior estimations from an internal model. The processing required for optimal state estimation and control were conducted in the state-space, and neural recording was simulated by modeling two populations of neurons that encode either only the estimated state or also the control signal. Spike counts were generated as realizations of doubly stochastic Poisson processes with linear tuning curves. The model successfully reconstructs the main features of the kinematics and neural activity during regular reaching movements. Most importantly, the activity of the simulated neurons successfully reproduces the observed changes in neural modulations upon switching to brain control. Further theoretical analysis and simulations indicate that increasing the process noise during normal reaching movement results in similar changes in neural modulations. Thus, we conclude that the observed changes in neural modulations during BMI experiments can be attributed to increasing process noise associated with the imperfect BMI filter, and, more directly, to the resulting increase in the variance of the encoded signals associated with state estimation and the required control signal.

Optimal feedback control successfully explains changes in neural modulations during experiments with brain-machine interfaces

PubMed Central

Benyamini, Miri; Zacksenhouse, Miriam

2015-01-01

Recent experiments with brain-machine-interfaces (BMIs) indicate that the extent of neural modulations increased abruptly upon starting to operate the interface, and especially after the monkey stopped moving its hand. In contrast, neural modulations that are correlated with the kinematics of the movement remained relatively unchanged. Here we demonstrate that similar changes are produced by simulated neurons that encode the relevant signals generated by an optimal feedback controller during simulated BMI experiments. The optimal feedback controller relies on state estimation that integrates both visual and proprioceptive feedback with prior estimations from an internal model. The processing required for optimal state estimation and control were conducted in the state-space, and neural recording was simulated by modeling two populations of neurons that encode either only the estimated state or also the control signal. Spike counts were generated as realizations of doubly stochastic Poisson processes with linear tuning curves. The model successfully reconstructs the main features of the kinematics and neural activity during regular reaching movements. Most importantly, the activity of the simulated neurons successfully reproduces the observed changes in neural modulations upon switching to brain control. Further theoretical analysis and simulations indicate that increasing the process noise during normal reaching movement results in similar changes in neural modulations. Thus, we conclude that the observed changes in neural modulations during BMI experiments can be attributed to increasing process noise associated with the imperfect BMI filter, and, more directly, to the resulting increase in the variance of the encoded signals associated with state estimation and the required control signal. PMID:26042002

Process- and controller-adaptations determine the physiological effects of cold acclimation.

PubMed

Werner, Jürgen

2008-09-01

Experimental results on physiological effects of cold adaptation seem confusing and apparently incompatible with one another. This paper will explain that a substantial part of such a variety of results may be deduced from a common functional concept. A core/shell treatment ("model") of the thermoregulatory system is used with mean body temperature as the controlled variable. Adaptation, as a higher control level, is introduced into the system. Due to persistent stressors, either the (heat transfer) process or the controller properties (parameters) are adjusted (or both). It is convenient to call the one "process adaptation" and the other "controller adaptation". The most commonly demonstrated effect of autonomic cold acclimation is a change in the controller threshold. The analysis shows that this necessarily means a lowering of body temperature because of a lowered metabolic rate. This explains experimental results on both Europeans in the climatic chamber and Australian Aborigines in a natural environment. Exclusive autonomic process adaptation occurs in the form of a better insulation. The analysis explains why the post-adaptive steady-state can only be achieved, if the controller system reduces metabolism and why in spite of this the new state is inevitably characterized by a rise in body temperature. If both process and controller adaptations are simultaneously present, there may be not any change of body temperature at all, e.g., as demonstrated in animal experiments. Whether this kind of adaptation delivers a decrease, an increase or no change of mean body temperature, depends on the proportion of process and controller adaptation.

Fear Control an Danger Control: A Test of the Extended Parallel Process Model (EPPM).

ERIC Educational Resources Information Center

Witte, Kim

1994-01-01

Explores cognitive and emotional mechanisms underlying success and failure of fear appeals in context of AIDS prevention. Offers general support for Extended Parallel Process Model. Suggests that cognitions lead to fear appeal success (attitude, intention, or behavior changes) via danger control processes, whereas the emotion fear leads to fear…

Cognitive Control and Language across the Life Span: Does Labeling Improve Reactive Control?

ERIC Educational Resources Information Center

Lucenet, Joanna; Blaye, Agnès; Chevalier, Nicolas; Kray, Jutta

2014-01-01

How does cognitive control change with age, and what are the processes underlying these changes? This question has been extensively studied using versions of the task-switching paradigm, which allow participants to actively prepare for the upcoming task (Kray, Eber, & Karbach, 2008). Little is known, however, about age-related changes in this…

21 CFR 820.70 - Production and process controls.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to ensure that a device conforms to its specifications. Where deviations from device specifications... specifications. Where process controls are needed they shall include: (1) Documented instructions, standard... establish and maintain procedures for changes to a specification, method, process, or procedure. Such...

21 CFR 820.70 - Production and process controls.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to ensure that a device conforms to its specifications. Where deviations from device specifications... specifications. Where process controls are needed they shall include: (1) Documented instructions, standard... establish and maintain procedures for changes to a specification, method, process, or procedure. Such...

Tools for understanding landscapes: combining large-scale surveys to characterize change. Chapter 9.

Treesearch

W. Keith Moser; Janine Bolliger; Don C. Bragg; Mark H. Hansen; Mark A. Hatfield; Timothy A. Nigh; Lisa A. Schulte

2008-01-01

All landscapes change continuously. Since change is perceived and interpreted through measures of scale, any quantitative analysis of landscapes must identify and describe the spatiotemporal mosaics shaped by large-scale structures and processes. This process is controlled by core influences, or "drivers," that shape the change and affect the outcome...

Therapeutic Opportunities for Self-Control Repair in Addiction and Related Disorders: Change and the Limits of Change in Trans-Disease Processes

PubMed Central

Bickel, Warren K.; Quisenberry, Amanda J.; Moody, Lara; Wilson, A. George

2014-01-01

Contemporary neuro-economic approaches hypothesize that self-control failure results from drugs annexing normal learning mechanisms that produce pathological reward processing and distort decision-making as a result from the dysregulation of two valuation systems. An emphasis on processes shared across different diseases and disorders is at odds with the contemporary approach that assumes unique disease etiologies and treatments. Studying trans-disease processes can identify mechanisms that operate in multiple disease states and ascertain if factors that influence processes in one disease state may be applicable to all disease states. In this paper we review the dual model of self-control failure, the Competing Neurobehavioral Decision Systems approach, the relationship of delay discounting to the relative control of these two systems, and evidence that the executive system can be strengthened. Future research that could result in more potent interventions for executive system improvement and potential constraints on the repair of self-control failure are discussed. PMID:25664226

Dual Rate Adaptive Control for an Industrial Heat Supply Process Using Signal Compensation Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chai, Tianyou; Jia, Yao; Wang, Hong

The industrial heat supply process (HSP) is a highly nonlinear cascaded process which uses a steam valve opening as its control input, the steam flow-rate as its inner loop output and the supply water temperature as its outer loop output. The relationship between the heat exchange rate and the model parameters, such as steam density, entropy, and fouling correction factor and heat exchange efficiency are unknown and nonlinear. Moreover, these model parameters vary in line with steam pressure, ambient temperature and the residuals caused by the quality variations of the circulation water. When the steam pressure and the ambient temperaturemore » are of high values and are subjected to frequent external random disturbances, the supply water temperature and the steam flow-rate would interact with each other and fluctuate a lot. This is also true when the process exhibits unknown characteristic variations of the process dynamics caused by the unexpected changes of the heat exchange residuals. As a result, it is difficult to control the supply water temperature and the rates of changes of steam flow-rate well inside their targeted ranges. In this paper, a novel compensation signal based dual rate adaptive controller is developed by representing the unknown variations of dynamics as unmodeled dynamics. In the proposed controller design, such a compensation signal is constructed and added onto the control signal obtained from the linear deterministic model based feedback control design. Such a compensation signal aims at eliminating the unmodeled dynamics and the rate of changes of the currently sample unmodeled dynamics. A successful industrial application is carried out, where it has been shown that both the supply water temperature and the rate of the changes of the steam flow-rate can be controlled well inside their targeted ranges when the process is subjected to unknown variations of its dynamics.« less

A possible new approach to understanding mental disorder.

PubMed

Sharples, P J

2012-09-01

The aetiology of mental disorders is not fully understood. This paper presents an analysis of the conceptual control process exploring the tools of conceptual application and the phases and the mechanism of the control process and seeks to show how the illness states of mental disorder naturally come to occur. Living occurs in a world of change. For living to occur some control is required and to exert control, to provide direction for the conceptual process, some interpretation of significance, some definition of need is also required. Such interpretation, monitoring significance in relation to the many aspects of change, forms the base on which living occurs. Change in human terms is intrinsically insecure and interpretation of significance is an interpretation of security, an interpretation of control in living. Conceptual control is a process applied to maintain security, to maintain a secure base for the interpretation of significance, it is a process applied to produce and hold a sense of control. Powering a process, producing and holding a sense of control, is an active process and so requires some form of energy. Human beings have a sense of that energy, something exhibited in terms such as full of energy, tired, exhausted. As energy is required to power the control process, accompanying the sense of energy is a sense of the ability to provide power, is a sense of the ability to hold and maintain control, is a sense of security. As available energy reduces there is difficulty holding the same sense of control, a person in the same setting comes to feel more insecure. This can result in a person experiencing mental disorder from mild to severe degree. Mild where conceptual process is applied to manage just one or a very few particular needs, severe and more general where the insecurity affects the base of interpretation. In this later case seeking to protect security can lead to mania, mood-incongruent delusions, schizophrenia. Failing ability to protect can lead to generalized anxiety disorder, mood-congruent delusions, different presentations and degrees of depression. Copyright © 2012 Elsevier Ltd. All rights reserved.

Using Automatic Code Generation in the Attitude Control Flight Software Engineering Process

NASA Technical Reports Server (NTRS)

McComas, David; O'Donnell, James R., Jr.; Andrews, Stephen F.

1999-01-01

This paper presents an overview of the attitude control subsystem flight software development process, identifies how the process has changed due to automatic code generation, analyzes each software development phase in detail, and concludes with a summary of our lessons learned.

Application of machine learning and expert systems to Statistical Process Control (SPC) chart interpretation

NASA Technical Reports Server (NTRS)

Shewhart, Mark

1991-01-01

Statistical Process Control (SPC) charts are one of several tools used in quality control. Other tools include flow charts, histograms, cause and effect diagrams, check sheets, Pareto diagrams, graphs, and scatter diagrams. A control chart is simply a graph which indicates process variation over time. The purpose of drawing a control chart is to detect any changes in the process signalled by abnormal points or patterns on the graph. The Artificial Intelligence Support Center (AISC) of the Acquisition Logistics Division has developed a hybrid machine learning expert system prototype which automates the process of constructing and interpreting control charts.

Using ‘appreciative inquiry’ in India to improve infection control practices in maternity care: a qualitative study

PubMed Central

Sharma, Bharati; Ramani, K.V.; Mavalankar, Dileep; Kanguru, Lovney; Hussein, Julia

2015-01-01

Background Infections acquired during childbirth are a common cause of maternal and perinatal mortality and morbidity. Changing provider behaviour and organisational settings within the health system is key to reducing the spread of infection. Objective To explore the opinions of health personnel on health system factors related to infection control and their perceptions of change in a sample of hospital maternity units. Design An organisational change process called ‘appreciative inquiry’ (AI) was introduced in three maternity units of hospitals in Gujarat, India. AI is a change process that builds on recognition of positive actions, behaviours, and attitudes. In-depth interviews were conducted with health personnel to elicit information on the environment within which they work, including physical and organisational factors, motivation, awareness, practices, perceptions of their role, and other health system factors related to infection control activities. Data were obtained from three hospitals which implemented AI and another three not involved in the intervention. Results Challenges which emerged included management processes (e.g. decision-making and problem-solving modalities), human resource shortages, and physical infrastructure (e.g. space, water, and electricity supplies). AI was perceived as having a positive influence on infection control practices. Respondents also said that management processes improved although some hospitals had already undergone an accreditation process which could have influenced the changes described. Participants reported that team relationships had been strengthened due to AI. Conclusion Technical knowledge is often emphasised in health care settings and less attention is paid to factors such as team relationships, leadership, and problem solving. AI can contribute to improving infection control by catalysing and creating forums for team building, shared decision making and problem solving in an enabling environment. PMID:26119249

Using 'appreciative inquiry' in India to improve infection control practices in maternity care: a qualitative study.

PubMed

Sharma, Bharati; Ramani, K V; Mavalankar, Dileep; Kanguru, Lovney; Hussein, Julia

2015-01-01

Infections acquired during childbirth are a common cause of maternal and perinatal mortality and morbidity. Changing provider behaviour and organisational settings within the health system is key to reducing the spread of infection. To explore the opinions of health personnel on health system factors related to infection control and their perceptions of change in a sample of hospital maternity units. An organisational change process called 'appreciative inquiry' (AI) was introduced in three maternity units of hospitals in Gujarat, India. AI is a change process that builds on recognition of positive actions, behaviours, and attitudes. In-depth interviews were conducted with health personnel to elicit information on the environment within which they work, including physical and organisational factors, motivation, awareness, practices, perceptions of their role, and other health system factors related to infection control activities. Data were obtained from three hospitals which implemented AI and another three not involved in the intervention. Challenges which emerged included management processes (e.g. decision-making and problem-solving modalities), human resource shortages, and physical infrastructure (e.g. space, water, and electricity supplies). AI was perceived as having a positive influence on infection control practices. Respondents also said that management processes improved although some hospitals had already undergone an accreditation process which could have influenced the changes described. Participants reported that team relationships had been strengthened due to AI. Technical knowledge is often emphasised in health care settings and less attention is paid to factors such as team relationships, leadership, and problem solving. AI can contribute to improving infection control by catalysing and creating forums for team building, shared decision making and problem solving in an enabling environment.

Self-Regulation, Self-Efficacy and Health Behavior Change in Older Adults.

ERIC Educational Resources Information Center

Purdie, Nola; McCrindle, Andrea

2002-01-01

Presents an overview of self-regulation models: theory of planned behavior, protection motivation theory, health belief model, action control theory, transtheoretical model of behavior change, health action process, and precaution adoption process. Applies models to health behavior change in older adults with cardiovascular disease or diabetes.…

[INVITED] Evaluation of process observation features for laser metal welding

NASA Astrophysics Data System (ADS)

Tenner, Felix; Klämpfl, Florian; Nagulin, Konstantin Yu.; Schmidt, Michael

2016-06-01

In the present study we show how fast the fluid dynamics change when changing the laser power for different feed rates during laser metal welding. By the use of two high-speed cameras and a data acquisition system we conclude how fast we have to image the process to measure the fluid dynamics with a very high certainty. Our experiments show that not all process features which can be measured during laser welding do represent the process behavior similarly well. Despite the good visibility of the vapor plume the monitoring of its movement is less suitable as an input signal for a closed-loop control. The features measured inside the keyhole show a good correlation with changes of process parameters. Due to its low noise, the area of the keyhole opening is well suited as an input signal for a closed-loop control of the process.

Search and the Aging Mind: The Promise and Limits of the Cognitive Control Hypothesis of Age Differences in Search.

PubMed

Mata, Rui; von Helversen, Bettina

2015-07-01

Search is a prerequisite for successful performance in a broad range of tasks ranging from making decisions between consumer goods to memory retrieval. How does aging impact search processes in such disparate situations? Aging is associated with structural and neuromodulatory brain changes that underlie cognitive control processes, which in turn have been proposed as a domain-general mechanism controlling search in external environments as well as memory. We review the aging literature to evaluate the cognitive control hypothesis that suggests that age-related change in cognitive control underlies age differences in both external and internal search. We also consider the limits of the cognitive control hypothesis and propose additional mechanisms such as changes in strategy use and affect that may be necessary to understand how aging affects search. Copyright © 2015 Cognitive Science Society, Inc.

Team Software Process (TSP) Body of Knowledge (BOK)

DTIC Science & Technology

2010-07-01

styles that correspond stereotypical extremes of group control and coordination, as shown in Figure 5. closed, random, open, and synchronous group ...and confirming the resolutions • managing the design change process and coordinating changes with the configuration control board • reporting...members. 123 | CMU/SEI-2010-TR-020 4. Coaching – Obtain a lead coach and the coaches for each team. 5. Conceptual design – Form a working group of

Brain responses to sound intensity changes dissociate depressed participants and healthy controls.

PubMed

Ruohonen, Elisa M; Astikainen, Piia

2017-07-01

Depression is associated with bias in emotional information processing, but less is known about the processing of neutral sensory stimuli. Of particular interest is processing of sound intensity which is suggested to indicate central serotonergic function. We tested weather event-related brain potentials (ERPs) to occasional changes in sound intensity can dissociate first-episode depressed, recurrent depressed and healthy control participants. The first-episode depressed showed larger N1 amplitude to deviant sounds compared to recurrent depression group and control participants. In addition, both depression groups, but not the control group, showed larger N1 amplitude to deviant than standard sounds. Whether these manifestations of sensory over-excitability in depression are directly related to the serotonergic neurotransmission requires further research. The method based on ERPs to sound intensity change is fast and low-cost way to objectively measure brain activation and holds promise as a future diagnostic tool. Copyright © 2017 Elsevier B.V. All rights reserved.

Effects of Plant Traits on Ecosystem and Regional Processes: a Conceptual Framework for Predicting the Consequences of Global Change

PubMed Central

CHAPIN, F. STUART

2003-01-01

Human activities are causing widespread changes in the species composition of natural and managed ecosystems, but the consequences of these changes are poorly understood. This paper presents a conceptual framework for predicting the ecosystem and regional consequences of changes in plant species composition. Changes in species composition have greatest ecological effects when they modify the ecological factors that directly control (and respond to) ecosystem processes. These interactive controls include: functional types of organisms present in the ecosystem; soil resources used by organisms to grow and reproduce; modulators such as microclimate that influence the activity of organisms; disturbance regime; and human activities. Plant traits related to size and growth rate are particularly important because they determine the productive capacity of vegetation and the rates of decomposition and nitrogen mineralization. Because the same plant traits affect most key processes in the cycling of carbon and nutrients, changes in plant traits tend to affect most biogeochemical cycling processes in parallel. Plant traits also have landscape and regional effects through their effects on water and energy exchange and disturbance regime. PMID:12588725

LABORATORY PROCESS CONTROLLER USING NATURAL LANGUAGE COMMANDS FROM A PERSONAL COMPUTER

NASA Technical Reports Server (NTRS)

Will, H.

1994-01-01

The complex environment of the typical research laboratory requires flexible process control. This program provides natural language process control from an IBM PC or compatible machine. Sometimes process control schedules require changes frequently, even several times per day. These changes may include adding, deleting, and rearranging steps in a process. This program sets up a process control system that can either run without an operator, or be run by workers with limited programming skills. The software system includes three programs. Two of the programs, written in FORTRAN77, record data and control research processes. The third program, written in Pascal, generates the FORTRAN subroutines used by the other two programs to identify the user commands with the user-written device drivers. The software system also includes an input data set which allows the user to define the user commands which are to be executed by the computer. To set the system up the operator writes device driver routines for all of the controlled devices. Once set up, this system requires only an input file containing natural language command lines which tell the system what to do and when to do it. The operator can make up custom commands for operating and taking data from external research equipment at any time of the day or night without the operator in attendance. This process control system requires a personal computer operating under MS-DOS with suitable hardware interfaces to all controlled devices. The program requires a FORTRAN77 compiler and user-written device drivers. This program was developed in 1989 and has a memory requirement of about 62 Kbytes.

Logic gate scanner focus control in high-volume manufacturing using scatterometry

NASA Astrophysics Data System (ADS)

Dare, Richard J.; Swain, Bryan; Laughery, Michael

2004-05-01

Tool matching and optimal process control are critical requirements for success in semiconductor manufacturing. It is imperative that a tool"s operating conditions are understood and controlled in order to create a process that is repeatable and produces devices within specifications. Likewise, it is important where possible to match multiple systems using some methodology, so that regardless of which tool is used the process remains in control. Agere Systems is currently using Timbre Technologies" Optical Digital Profilometry (ODP) scatterometry for controlling Nikon scanner focus at the most critical lithography layer; logic gate. By adjusting focus settings and verifying the resultant changes in resist profile shape using ODP, it becomes possible to actively control scanner focus to achieve a desired resist profile. Since many critical lithography processes are designed to produce slightly re-entrant resist profiles, this type of focus control is not possible via Critical Dimension Scanning Electron Microscopy (CDSEM) where reentrant profiles cannot be accurately determined. Additionally, the high throughput and non-destructive nature of this measurement technique saves both cycle time and wafer costs compared to cross-section SEM. By implementing an ODP daily process check and after any maintenance on a scanner, Agere successfully enabled focus drift control, i.e. making necessary focus or equipment changes in order to maintain a desired resist profile.

A neural network controller of a flotation process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durao, F.; Cortez, L.

1995-12-31

The dynamic control of a froth flotation section is simulated through a neural network feedback controller, trained in order to stabilize the concentrate metal grade and recovery by applying random step changes to the feed metal grade. The results of the application example show that this controller seems to be sufficiently robust and a good alternative to handle a non-linear process.

78 FR 53181 - Self-Regulatory Organizations; New York Stock Exchange LLC; Order Approving Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-28

... process of upgrading their accounting systems and internal controls and hiring additional staff to meet... thereunder, that require registered companies to devise and maintain a system of internal accounting controls... company's risk management processes and system of internal control. A listed company may choose to...

Early strength prediction of concrete based on accelerated curing methods : final report.

DOT National Transportation Integrated Search

1995-12-01

Concrete mix designs and components may currently be changed during the course of a project. The possible negative effects of such changes on concrete strength, are not determined under the current plant control/project control process. Also, the cur...

Health-care process improvement decisions: a systems perspective.

PubMed

Walley, Paul; Silvester, Kate; Mountford, Shaun

2006-01-01

The paper seeks to investigate decision-making processes within hospital improvement activity, to understand how performance measurement systems influence decisions and potentially lead to unsuccessful or unsustainable process changes. A longitudinal study over a 33-month period investigates key events, decisions and outcomes at one medium-sized hospital in the UK. Process improvement events are monitored using process control methods and by direct observation. The authors took a systems perspective of the health-care processes, ensuring that the impacts of decisions across the health-care supply chain were appropriately interpreted. The research uncovers the ways in which measurement systems disguise failed decisions and encourage managers to take a low-risk approach of "symptomatic relief" when trying to improve performance metrics. This prevents many managers from trying higher risk, sustainable process improvement changes. The behaviour of the health-care system is not understood by many managers and this leads to poor analysis of problem situations. Measurement using time-series methodologies, such as statistical process control are vital for a better understanding of the systems impact of changes. Senior managers must also be aware of the behavioural influence of similar performance measurement systems that discourage sustainable improvement. There is a risk that such experiences will tarnish the reputation of performance management as a discipline. Recommends process control measures as a way of creating an organization memory of how decisions affect performance--something that is currently lacking.

Poster - Thur Eve - 29: Detecting changes in IMRT QA using statistical process control.

PubMed

Drever, L; Salomons, G

2012-07-01

Statistical process control (SPC) methods were used to analyze 239 measurement based individual IMRT QA events. The selected IMRT QA events were all head and neck (H&N) cases with 70Gy in 35 fractions, and all prostate cases with 76Gy in 38 fractions planned between March 2009 and 2012. The results were used to determine if the tolerance limits currently being used for IMRT QA were able to indicate if the process was under control. The SPC calculations were repeated for IMRT QA of the same type of cases that were planned after the treatment planning system was upgraded from Eclipse version 8.1.18 to version 10.0.39. The initial tolerance limits were found to be acceptable for two of the three metrics tested prior to the upgrade. After the upgrade to the treatment planning system the SPC analysis found that the a priori limits were no longer capable of indicating control for 2 of the 3 metrics analyzed. The changes in the IMRT QA results were clearly identified using SPC, indicating that it is a useful tool for finding changes in the IMRT QA process. Routine application of SPC to IMRT QA results would help to distinguish unintentional trends and changes from the random variation in the IMRT QA results for individual plans. © 2012 American Association of Physicists in Medicine.

Camera Based Closed Loop Control for Partial Penetration Welding of Overlap Joints

NASA Astrophysics Data System (ADS)

Abt, F.; Heider, A.; Weber, R.; Graf, T.; Blug, A.; Carl, D.; Höfler, H.; Nicolosi, L.; Tetzlaff, R.

Welding of overlap joints with partial penetration in automotive applications is a challenging process, since the laser power must be set very precisely to achieve a proper connection between the two joining partners without damaging the backside of the sheet stack. Even minor changes in welding conditions can lead to bad results. To overcome this problem a camera based closed loop control for partial penetration welding of overlap joints was developed. With this closed loop control it is possible to weld such configurations with a stable process result even under changing welding conditions.

Controllable SET process in O-Ti-Sb-Te based phase change memory for synaptic application

NASA Astrophysics Data System (ADS)

Ren, Kun; Li, Ruiheng; Chen, Xin; Wang, Yong; Shen, Jiabin; Xia, Mengjiao; Lv, Shilong; Ji, Zhenguo; Song, Zhitang

2018-02-01

The nonlinear resistance change and small bit resolution of phase change memory (PCM) under identical operation pulses will limit its performance as a synaptic device. The octahedral Ti-Te units in Ti-Sb-Te, regarded as nucleation seeds, are degenerated when Ti is bonded with O, causing a slower crystallization and a controllable SET process in PCM cells. A linear resistance change under identical pulses, a resolution of ˜8 bits, and an ON/OFF ratio of ˜102 has been achieved in O-Ti-Sb-Te based PCM, showing its potential application as a synaptic device to improve recognition performance of the neural network.

[Assessment of the validity and reliability of the processes of change scale based on the transtheoretical model of vegetable consumption behavior in Japanese male workers].

PubMed

Kushida, Osamu; Murayama, Nobuko

2012-12-01

A core construct of the Transtheoretical model is that the processes and stages of change are strongly related to observable behavioral changes. We created the Processes of Change Scale of vegetable consumption behavior and examined the validity and reliability of this scale. In September 2009, a self-administered questionnaire was administered to male Japanese employees, aged 20-59 years, working at 20 worksites in Niigata City in Japan. The stages of change (precontempration, contemplation, preparation, action, and maintenance stage) were measured using 2 items that assessed participants' current implementation of the target behavior (eating 5 or more servings of vegetables per day) and their readiness to change their habits. The Processes of Change Scale of vegetable consumption behavior comprised 10 items assessing 5 cognitive processes (consciousness raising, emotional arousal, environmental reevaluation, self-reevaluation, and social liberation) and 5 behavioral processes (commitment, rewards, helping relationships, countering, and environment control). Each item was selected from an existing scale. Decisional balance (pros [2 items] and cons [2 items]), and self-efficacy (3 items) were also assessed, because these constructs were considered to be relevant to the processes of change. The internal consistency reliability of the scale was examined using Cronbach's alpha. Its construct validity was examined using a factor analysis of the processes of change, decisional balance, and self-efficacy variables, while its criterion-related validity was determined by assessing the association between the scale scores and the stages of change. The data of 527 (out of 600) participants (mean age, 41.1 years) were analyzed. Results indicated that the Processes of Change Scale had sufficient internal consistency reliability (Cronbach's alpha: cognitive processes=0.722, behavioral processes=0.803). The processes of change were divided into 2 factors: "consciousness raising, emotional arousal, environmental reevaluation, self-reevaluation, commitment, rewards, helping relationships, and social liberation" and "countering and environment control" in the factor analysis. Moreover, each construct--the processes of change, decisional balance, and self-efficacy--could be classified into different factors. The scores for cognitive processes were higher in the contemplation and preparation stages than in the precontemplation stage (P<0.05). Scores for behavioral processes increased from the precontemplation stage to the preparation stages (P<0.05), and were higher in the action + maintenance stage than in the precontemplation stage (P< 0.05). For male workers, the Processes of Change Scale has sufficient validity and reliability, as demonstrated by the internal fitness and the construct and criterion-related validity of the scale found in this study.

Analysis of weight control in Korean adolescents using the transtheoretical model.

PubMed

Chae, Sun-Mi; Kwon, Insook; Kim, Chun-Ja; Jang, Jaecheol

2010-06-01

The purpose of this study was to identify the stages of change, the processes of change, and the decisional balance for weight control, self-efficacy, and other weight control-related variables and to determine the significant factors explaining movements between the stages of change in Korean adolescents. A total of 475 adolescents completed questionnaires and anthropometric measures. The majority of the adolescents were in the precontemplation (42.1%) and contemplation (43.0%) stages. The benefits of weight control (pros), desire for weight change, perceived body shape, and past experience with weight control increased the odds ratio of movement from precontemplation to contemplation. Stimulus control, self-reevaluation, regular exercise, and past experience of weight control significantly influenced the movement to action and maintenance from contemplation. The study results suggest that weight control programs should emphasize significant factors to help adolescents move through the stages of change.

Reversal of alcohol-induced effects on response control due to changes in proprioceptive information processing.

PubMed

Stock, Ann-Kathrin; Mückschel, Moritz; Beste, Christian

2017-01-01

Recent research has drawn interest to the effects of binge drinking on response selection. However, choosing an appropriate response is a complex endeavor that usually requires us to process and integrate several streams of information. One of them is proprioceptive information about the position of limbs. As to now, it has however remained elusive how binge drinking affects the processing of proprioceptive information during response selection and control in healthy individuals. We investigated this question using neurophysiological (EEG) techniques in a response selection task, where we manipulated proprioceptive information. The results show a reversal of alcohol-induced effects on response control due to changes in proprioceptive information processing. The most likely explanation for this finding is that proprioceptive information does not seem to be properly integrated in response selection processes during acute alcohol intoxication as found in binge drinking. The neurophysiological data suggest that processes related to the preparation and execution of the motor response, but not upstream processes related to conflict monitoring and spatial attentional orienting, underlie these binge drinking-dependent modulations. Taken together, the results show that even high doses of alcohol have very specific effects within the cascade of neurophysiological processes underlying response control and the integration of proprioceptive information during this process. © 2015 Society for the Study of Addiction.

Aeropropulsion facilities configuration control: Procedures manual

NASA Technical Reports Server (NTRS)

Lavelle, James J.

1990-01-01

Lewis Research Center senior management directed that the aeropropulsion facilities be put under configuration control. A Configuration Management (CM) program was established by the Facilities Management Branch of the Aeropropulsion Facilities and Experiments Division. Under the CM program, a support service contractor was engaged to staff and implement the program. The Aeronautics Directorate has over 30 facilities at Lewis of various sizes and complexities. Under the program, a Facility Baseline List (FBL) was established for each facility, listing which systems and their documents were to be placed under configuration control. A Change Control System (CCS) was established requiring that any proposed changes to FBL systems or their documents were to be processed as per the CCS. Limited access control of the FBL master drawings was implemented and an audit system established to ensure all facility changes are properly processed. This procedures manual sets forth the policy and responsibilities to ensure all key documents constituting a facilities configuration are kept current, modified as needed, and verified to reflect any proposed change. This is the essence of the CM program.

Evaluating the effect of Focus Farms on Ontario dairy producers' knowledge, attitudes, and behavior toward control of Johne's disease.

PubMed

Roche, S M; Jones-Bitton, A; Meehan, M; Von Massow, M; Kelton, D F

2015-08-01

This study evaluated a participatory-based, experiential learning program, Ontario Focus Farms (FF), which aimed to change dairy producer behavior to control Johne's disease (JD) in Ontario, Canada. The goals were to (1) assess the effect of FF on participating dairy producers' knowledge, attitudes, and behavior with regard to JD control; (2) compare changes in these factors among FF participants to changes among a group of nonparticipating dairy producers; and (3) describe the characteristics of producers who made at least one on-farm management change. Pre- and post-FF intervention questionnaires collected data on respondents' knowledge, attitudes, behavior, herd production, and demographic information; before and after JD-risk assessments were used to assess respondents' on-farm risk of JD transmission. Overall, 176 dairy producers participated in the FF process; 39.8% (70/176) of FF and 14.6% (52/357) of control participants responded to both the pre- and postintervention questionnaires. Upon comparison, FF respondents were more likely to be younger, have larger herds, and have higher management scores. The proportion of FF participants who reported making at least one on-farm change (81%) was significantly higher than that of control respondents (38%). Overall, FF respondents significantly changed their risk score in 4 out of 5 risk areas and had an average reduction of 13 points in their overall risk score between before and after risk assessments. Control respondents' risk assessment scores did not significantly change during the study period. In a JD knowledge assessment, FF and control respondents exhibited a moderate knowledge score before the intervention period, with median scores of 75.9% (22/29) in each group. The FF respondents significantly increased their score at the postintervention assessment, with a median of 82.8% (24/29); control-respondent scores did not significantly change. Both FF and control respondents held strong positive attitudes toward JD control and felt a moderate amount of social pressure from veterinarians and industry organizations to make on-farm changes. However, they questioned their ability to effectively control JD on the farm. Last, participating in FF, having a moderate herd management score, having a positive perception about the practicality of on-farm recommendations, and having a singular learning preference were associated with increased odds of making an on-farm change. Overall, the FF process appears to be effective at influencing producer behavior toward implementing on-farm management practices for JD control. Future JD control programs should consider implementing peer-learning extension processes, such as FF, in combination with other extension approaches, to influence producer behavior. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Aging changes in hormone production

MedlinePlus

... this page: //medlineplus.gov/ency/article/004000.htm Aging changes in hormone production To use the sharing ... that produce hormones are controlled by other hormones. Aging also changes this process. For example, an endocrine ...

Context-specific adjustment of cognitive control: Transfer of adaptive control sets.

PubMed

Surrey, Caroline; Dreisbach, Gesine; Fischer, Rico

2017-11-01

Cognitive control protects processing of relevant information from interference by irrelevant information. The level of this processing selectivity can be flexibly adjusted to different control demands (e.g., frequency of conflict) associated with a certain context, leading to the formation of specific context-control associations. In the present study we investigated the robustness and transferability of the acquired context-control demands to new situations. In three experiments, we used a version of the context-specific proportion congruence (CSPC) paradigm, in which each context (e.g., location) is associated with a specific conflict frequency, determining high and low control demands. In a learning phase, associations between context and control demands were established. In a subsequent transfer block, stimulus-response mappings, whole task sets, or context-control demands changed. Results showed an impressive robustness of context-control associations, as context-specific adjustments of control from the learning phase were virtually unaffected by new stimuli and tasks in the transfer block. Only a change of the context-control demand eliminated the context-specific adjustment of control. These findings suggest that context-control associations that have proven to be adaptive in the past are continuously applied despite major changes in the task structure as long as the context-control associations remain the same.

Process for control of cell division

NASA Technical Reports Server (NTRS)

Cone, C. D., Jr. (Inventor)

1977-01-01

A method of controlling mitosis of biological cells was developed, which involved inducing a change in the intracellular ionic hierarchy accompanying the cellular electrical transmembrane potential difference (Esubm) of the cells. The ionic hierarchy may be varied by imposing changes on the relative concentrations of Na(+), K(+) and Cl(-), or by directly imposing changes in the physical Esubm level across the cell surface.

Past Organizational Change and Managerial Evaluations of Crisis: A Case of Double-Loop Learning Effects in Non-Profit Organizations

ERIC Educational Resources Information Center

Mano, Rita S.

2010-01-01

Purpose: This paper examines the critical effect of learning from past changes on employees' evaluations regarding the extent that a crisis can be controlled and prevented. It is suggested that previous changes incorporate elements of a double-loop learning process that shape managerial perceptions of crisis controllability and crisis prevention.…

CHANGING APPROACHES TO CONTROLLING PATHOGENS IN BIOSOLIDS AND THEIR VECTOR ATTRACTIVENESS

EPA Science Inventory

This paper reviews the commonly employed Class A and B processes for controlling pathogens; notes how extensively they are used; and discusses issues and concerns with some of them. Processes presently being researched are also noted together with EPA's methodology for determinin...

Next Generation Parallelization Systems for Processing and Control of PDS Image Node Assets

NASA Astrophysics Data System (ADS)

Verma, R.

2017-06-01

We present next-generation parallelization tools to help Planetary Data System (PDS) Imaging Node (IMG) better monitor, process, and control changes to nearly 650 million file assets and over a dozen machines on which they are referenced or stored.

Occupancy change detection system and method

DOEpatents

Bruemmer, David J [Idaho Falls, ID; Few, Douglas A [Idaho Falls, ID

2009-09-01

A robot platform includes perceptors, locomotors, and a system controller. The system controller executes instructions for producing an occupancy grid map of an environment around the robot, scanning the environment to generate a current obstacle map relative to a current robot position, and converting the current obstacle map to a current occupancy grid map. The instructions also include processing each grid cell in the occupancy grid map. Within the processing of each grid cell, the instructions include comparing each grid cell in the occupancy grid map to a corresponding grid cell in the current occupancy grid map. For grid cells with a difference, the instructions include defining a change vector for each changed grid cell, wherein the change vector includes a direction from the robot to the changed grid cell and a range from the robot to the changed grid cell.

Design and application of process control charting methodologies to gamma irradiation practices

NASA Astrophysics Data System (ADS)

Saylor, M. C.; Connaghan, J. P.; Yeadon, S. C.; Herring, C. M.; Jordan, T. M.

2002-12-01

The relationship between the contract irradiation facility and the customer has historically been based upon a "PASS/FAIL" approach with little or no quality metrics used to gage the control of the irradiation process. Application of process control charts, designed in coordination with mathematical simulation of routine radiation processing, can provide a basis for understanding irradiation events. By using tools that simulate the physical rules associated with the irradiation process, end-users can explore process-related boundaries and the effects of process changes. Consequently, the relationship between contractor and customer can evolve based on the derived knowledge. The resulting level of mutual understanding of the irradiation process and its resultant control benefits both the customer and contract operation, and provides necessary assurances to regulators. In this article we examine the complementary nature of theoretical (point kernel) and experimental (dosimetric) process evaluation, and the resulting by-product of improved understanding, communication and control generated through the implementation of effective process control charting strategies.

Sorting Out Effects of Active Stream Restoration: Channel Morphology, Channel Change Processes and Potential Controls

NASA Astrophysics Data System (ADS)

McDowell, P. F.

2017-12-01

In many active restoration projects, instream structures or modifications are designed to produce specific change in channel form, such as reduced W:D or increased pool depth, yet there is little monitoring to evaluate effectiveness. Active restoration often takes place within a context of other land management changes that can have an effect on channel form. Thus, the effects of active restoration are difficult to separate from the effects of other management actions. We measured morphologic response to restoration designs on sections of the Middle Fork John Day River, a gravel-cobble bed river under a cattle grazing regime in the Blue Mountain of Oregon. Since 2000, restoration actions have included elimination of cattle grazing in the riparian zone (passive restoration), riparian planting of woody vegetation, instream log structures for fish habitat and pool maintenance, and elimination of a major flow diversion. We listed the hypothetical effects of each of these management changes, showing overlap among effects of active and passive restoration. Repeat cross-section and longitudinal profile surveys over eight years, and repeat aerial imagery, documented changes in channel width, depth and bed morphology, and processes of change (bank erosion or aggradation, point bar erosion or aggradation, bed incision or aggradation), in two restored reaches and two adjacent control (unrestored) reaches. Morphologic changes were modest. Bankfull cross-section area, width, and W:D all decreased slightly in both restored reaches. Control reaches were unchanged or increased slightly. Processes of change were markedly different among the four reaches, with different reaches dominated by different processes. One restored reach was dominated by slight bed aggradation, increased pool depth and deep pools/km, while the other restored reach was dominated by bank erosion, bar aggradation and slight bed incision, along with increased deep pools/km. The longitudinal profile showed significant re-arrangement of bed morphology. The spatial context of processes and controls allows some separation of the effectiveness of different management actions. Active restoration directly increased pool depth, but passive restoration apparently had more impact on aggradation/degradation and width.

Changes in prefrontal and amygdala activity during olanzapine treatment in schizophrenia.

PubMed

Blasi, Giuseppe; Popolizio, Teresa; Taurisano, Paolo; Caforio, Grazia; Romano, Raffaella; Di Giorgio, Annabella; Sambataro, Fabio; Rubino, Valeria; Latorre, Valeria; Lo Bianco, Luciana; Fazio, Leonardo; Nardini, Marcello; Weinberger, Daniel R; Bertolino, Alessandro

2009-07-15

Earlier imaging studies in schizophrenia have reported abnormal amygdala and prefrontal cortex activity during emotion processing. We investigated with functional magnetic resonance imaging (fMRI) during emotion processing changes in activity of the amygdala and of prefrontal cortex in patients with schizophrenia during 8 weeks of olanzapine treatment. Twelve previously drug-free/naive patients with schizophrenia were treated with olanzapine for 8 weeks and underwent two fMRI scans after 4 and 8 weeks of treatment during implicit and explicit emotional processing. Twelve healthy subjects were also scanned twice to control for potential repetition effects. Results showed a diagnosis by time interaction in left amygdala and a diagnosis by time by task interaction in right ventrolateral prefrontal cortex. In particular, activity in left amygdala was greater in patients than in controls at the first scan during both explicit and implicit processing, while it was lower in patients at the second relative to the first scan. Furthermore, during implicit processing, right ventrolateral prefrontal cortex activity was lower in patients than controls at the first scan, while it was greater in patients at the second relative to the first scan. These results suggest that longitudinal treatment with olanzapine may be associated with specific changes in activity of the amygdala and prefrontal cortex during emotional processing in schizophrenia.

Can't control yourself? Monitor those bad habits.

PubMed

Quinn, Jeffrey M; Pascoe, Anthony; Wood, Wendy; Neal, David T

2010-04-01

What strategies can people use to control unwanted habits? Past work has focused on controlling other kinds of automatic impulses, especially temptations. The nature of habit cuing calls for certain self-control strategies. Because the slow-to-change memory trace of habits is not amenable to change or reinterpretation, successful habit control involves inhibiting the unwanted response when activated in memory. In support, two episode-sampling diary studies demonstrated that bad habits, unlike responses to temptations, were controlled most effectively through spontaneous use of vigilant monitoring (thinking "don't do it," watching carefully for slipups). No other strategy was useful in controlling strong habits, despite that stimulus control was effective at inhibiting responses to temptations. A subsequent experiment showed that vigilant monitoring aids habit control, not by changing the strength of the habit memory trace but by heightening inhibitory, cognitive control processes. The implications of these findings for behavior change interventions are discussed.

Different activation of opercular and posterior cingulate cortex (PCC) in patients with complex regional pain syndrome (CRPS I) compared with healthy controls during perception of electrically induced pain: a functional MRI study.

PubMed

Freund, Wolfgang; Wunderlich, Arthur P; Stuber, Gregor; Mayer, Florian; Steffen, Peter; Mentzel, Martin; Weber, Frank; Schmitz, Bernd

2010-05-01

Although the etiology of complex regional pain syndrome type 1 (CRPS 1) is still debated, many arguments favor central maladaptive changes in pain processing as an important causative factor. To look for the suspected alterations, 10 patients with CRPS affecting the left hand were explored with functional magnetic resonance imaging during graded electrical painful stimulation of both hands subsequently and compared with healthy participants. Activation of the anterior insula, posterior cingulate cortex (PCC), and caudate nucleus was seen in patients during painful stimulation. Compared with controls, CRPS patients had stronger activation of the PCC during painful stimulation of the symptomatic hand. The comparison of insular/opercular activation between controls and patients with CRPS I during painful stimulation showed stronger (posterior) opercular activation in controls than in patients. Stronger PCC activation during painful stimulation may be interpreted as a correlate of motor inhibition during painful stimuli different from controls. Also, the decreased opercular activation in CRPS patients shows less sensory-discriminative processing of painful stimuli.These results show that changed cerebral pain processing in CRPS patients is less sensory-discriminative but more motor inhibition during painful stimuli. These changes are not limited to the diseased side but show generalized alterations of cerebral pain processing in chronic pain patients.

Precise Design of Phosphorescent Molecular Butterflies with Tunable Photoinduced Structural Change and Dual Emission.

PubMed

Zhou, Chenkun; Tian, Yu; Yuan, Zhao; Han, Mingu; Wang, Jamie; Zhu, Lei; Tameh, Maliheh Shaban; Huang, Chen; Ma, Biwu

2015-08-10

Photoinduced structural change (PSC) is a fundamental excited-state dynamic process in chemical and biological systems. However, precise control of PSC processes is very challenging, owing to the lack of guidelines for designing excited-state potential energy surfaces (PESs). A series of rationally designed butterfly-like phosphorescent binuclear platinum complexes that undergo controlled PSC by Pt-Pt distance shortening and exhibit tunable dual (greenish-blue and red) emission are herein reported. Based on the Bell-Evans-Polanyi principle, it is demonstrated how the energy barrier of the PSC, which can be described as a chemical-reaction-like process between the two energy minima on the first triplet excited-state PES, can be controlled by synthetic means. These results reveal a simple method to engineer the dual emission of molecular systems by manipulating PES to control PSC. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

75 FR 36306 - Chemical Mixtures Containing Listed Forms of Phosphorus and Change in Application Process

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-25

... 1117-AA66 Chemical Mixtures Containing Listed Forms of Phosphorus and Change in Application Process... phosphorus, white phosphorus (also known as yellow phosphorus), or hypophosphorous acid and its salts (hereinafter ``regulated phosphorus'') that shall automatically qualify for exemption from the Controlled...

27 CFR 40.512 - Change in ownership or control.

Code of Federal Regulations, 2011 CFR

2011-04-01

... notify the appropriate TTB officer in writing, giving the identity of such person. When there is any... processed tobacco results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer shall, within 30 days...

27 CFR 41.252 - Change in ownership or control.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., so notify the appropriate TTB officer in writing, giving the identity of such person. When there is... importer of processed tobacco results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer must, within 30...

27 CFR 40.512 - Change in ownership or control.

Code of Federal Regulations, 2014 CFR

2014-04-01

... notify the appropriate TTB officer in writing, giving the identity of such person. When there is any... processed tobacco results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer shall, within 30 days...

27 CFR 41.252 - Change in ownership or control.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., so notify the appropriate TTB officer in writing, giving the identity of such person. When there is... importer of processed tobacco results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer must, within 30...

27 CFR 40.512 - Change in ownership or control.

Code of Federal Regulations, 2012 CFR

2012-04-01

... notify the appropriate TTB officer in writing, giving the identity of such person. When there is any... processed tobacco results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer shall, within 30 days...

27 CFR 41.252 - Change in ownership or control.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., so notify the appropriate TTB officer in writing, giving the identity of such person. When there is... importer of processed tobacco results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer must, within 30...

27 CFR 40.512 - Change in ownership or control.

Code of Federal Regulations, 2013 CFR

2013-04-01

... notify the appropriate TTB officer in writing, giving the identity of such person. When there is any... processed tobacco results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer shall, within 30 days...

27 CFR 41.252 - Change in ownership or control.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., so notify the appropriate TTB officer in writing, giving the identity of such person. When there is... importer of processed tobacco results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer must, within 30...

Age-related changes in emotional face processing across childhood and into young adulthood: evidence from event-related potentials

PubMed Central

MacNamara, Annmarie; Vergés, Alvaro; Kujawa, Autumn; Fitzgerald, Kate D.; Monk, Christopher S.; Phan, K. Luan

2016-01-01

Socio-emotional processing is an essential part of development, and age-related changes in its neural correlates can be observed. The late positive potential (LPP) is a measure of motivated attention that can be used to assess emotional processing; however, changes in the LPP elicited by emotional faces have not been assessed across a wide age range in childhood and young adulthood. We used an emotional face matching task to examine behavior and event-related potentials (ERPs) in 33 youth aged 7 to 19 years old. Younger children were slower when performing the matching task. The LPP elicited by emotional faces but not control stimuli (geometric shapes) decreased with age; by contrast, an earlier ERP (the P1) decreased with age for both faces and shapes, suggesting increased efficiency of early visual processing. Results indicate age-related attenuation in emotional processing that may stem from increased efficiency and regulatory control when performing a socio-emotional task. PMID:26220144

Charge control microcomputer device for vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morishita, M.; Kouge, S.

1986-10-14

This patent describes a charge control microcomputer device for a vehicle, comprising: speed changing means for transmitting the output torque of an engine. The speed changing means includes a slip clutch means having an output with a variable slippage amount with respect to its input and controlled in accordance with an operating instruction. The speed changing means further includes a speed change gear for changing the rotational speed input thereto at an output thereto, the speed change gear receiving the output of the slip clutch means; a charging generator driven by the output of the speed change gear; a batterymore » charged by an output voltage of the charging generator; a voltage regulator for controlling the output voltage of the charging generator to a predetermined value; an engine controlling microcomputer for receiving data from the engine, to control the engine, the engine data comprising at least an engine speed signal; a charge control microcomputer for processing engine data from the engine controlling microcomputer and charge system data including terminal voltage data from the battery and generated voltage data from the changing generator; and a display unit for displaying detection data, including fault detection data, form the charge control microcomputer.« less

Applying the Quadruple Process Model to Evaluate Change in Implicit Attitudinal Responses During Therapy for Panic Disorder

PubMed Central

Clerkin, Elise M.; Fisher, Christopher R.; Sherman, Jeffrey W.; Teachman, Bethany A.

2013-01-01

Objective This study explored the automatic and controlled processes that may influence performance on an implicit measure across cognitive-behavioral group therapy for panic disorder. Method The Quadruple Process model was applied to error scores from an Implicit Association Test evaluating associations between the concepts Me (vs. Not Me) + Calm (vs. Panicked) to evaluate four distinct processes: Association Activation, Detection, Guessing, and Overcoming Bias. Parameter estimates were calculated in the panic group (n=28) across each treatment session where the IAT was administered, and at matched times when the IAT was completed in the healthy control group (n=31). Results Association Activation for Me + Calm became stronger over treatment for participants in the panic group, demonstrating that it is possible to change automatically activated associations in memory (vs. simply overriding those associations) in a clinical sample via therapy. As well, the Guessing bias toward the calm category increased over treatment for participants in the panic group. Conclusions This research evaluates key tenets about the role of automatic processing in cognitive models of anxiety, and emphasizes the viability of changing the actual activation of automatic associations in the context of treatment, versus only changing a person’s ability to use reflective processing to overcome biased automatic processing. PMID:24275066

Total Quality Management: Getting Started

DTIC Science & Technology

1990-08-01

Quality Management (TQM) program using Organizational Development (OD) intervention techniques to gain acceptance of the program. It emphasizes human behavior and the need for collaborative management and consensus in organizational change. Lessons learned stress the importance of choosing a skilled TQM facilitator, training process action teams, and fostering open communication and teamwork to minimize resistance to change. Keywords: Management planning and control, Quality control, Quality , Management , Organization change, Organization development,

To Meet or Not To Meet Physical vs. Virtual Configuration Control Board

NASA Technical Reports Server (NTRS)

Rice, Shelley

2017-01-01

This presentation will define the CCB, discuss its functions and members. We will look into traditional processes of managing change control via the CCB meeting and advanced practices utilizing enhanced product tools and technologies. Well step through a summary of the feedback from the community of CM professionals at NASA Goddard Space Flight Center of best practices as well as pros and cons for facilitating both a physical CCB and managing stakeholder approvals in a virtual environment. Attendees will come away with current industry strategies to determine if process for managing change control and approvals can be streamlined within their local work environments.

Apollo experience report: Systems and flight procedures development

NASA Technical Reports Server (NTRS)

Kramer, P. C.

1973-01-01

This report describes the process of crew procedures development used in the Apollo Program. The two major categories, Systems Procedures and Flight Procedures, are defined, as are the forms of documentation required. A description is provided of the operation of the procedures change control process, which includes the roles of man-in-the-loop simulations and the Crew Procedures Change Board. Brief discussions of significant aspects of the attitude control, computer, electrical power, environmental control, and propulsion subsystems procedures development are presented. Flight procedures are subdivided by mission phase: launch and translunar injection, rendezvous, lunar descent and ascent, and entry. Procedures used for each mission phase are summarized.

Adaptive Process Control with Fuzzy Logic and Genetic Algorithms

NASA Technical Reports Server (NTRS)

Karr, C. L.

1993-01-01

Researchers at the U.S. Bureau of Mines have developed adaptive process control systems in which genetic algorithms (GA's) are used to augment fuzzy logic controllers (FLC's). GA's are search algorithms that rapidly locate near-optimum solutions to a wide spectrum of problems by modeling the search procedures of natural genetics. FLC's are rule based systems that efficiently manipulate a problem environment by modeling the 'rule-of-thumb' strategy used in human decision-making. Together, GA's and FLC's possess the capabilities necessary to produce powerful, efficient, and robust adaptive control systems. To perform efficiently, such control systems require a control element to manipulate the problem environment, an analysis element to recognize changes in the problem environment, and a learning element to adjust to the changes in the problem environment. Details of an overall adaptive control system are discussed. A specific laboratory acid-base pH system is used to demonstrate the ideas presented.

Incentive-Related Modulation of Cognitive Control in Healthy, Anxious, and Depressed Adolescents: Development and Psychopathology Related Differences

ERIC Educational Resources Information Center

Hardin, Michael G.; Schroth, Elizabeth; Pine, Daniel S.; Ernst, Monique

2007-01-01

Background: Developmental changes in cognitive and affective processes contribute to adolescent risk-taking behavior, emotional intensification, and psychopathology. The current study examined adolescent development of cognitive control processes and their modulation by incentive, in health and psychopathology. Predictions include 1) better…

ARE THERE PATHOGENS IN YOUR SEWAGE SLUDGE? CHANGING APPROAHCES TO CONTROLLING PATHOGENS IN SEWAGE SLUDGE AND THEIR VECTOR ATTRACTIVENESS.

EPA Science Inventory

This presentation will review the commonly employed Class A & B processes for controlling pathogens; note how extensively they are used; and discuss issues and concerns. Processes presently being researched will also be noted together with EPA's methodology for determining equiva...

Lean principles optimize on-time vascular surgery operating room starts and decrease resident work hours.

PubMed

Warner, Courtney J; Walsh, Daniel B; Horvath, Alexander J; Walsh, Teri R; Herrick, Daniel P; Prentiss, Steven J; Powell, Richard J

2013-11-01

Lean process improvement techniques are used in industry to improve efficiency and quality while controlling costs. These techniques are less commonly applied in health care. This study assessed the effectiveness of Lean principles on first case on-time operating room starts and quantified effects on resident work hours. Standard process improvement techniques (DMAIC methodology: define, measure, analyze, improve, control) were used to identify causes of delayed vascular surgery first case starts. Value stream maps and process flow diagrams were created. Process data were analyzed with Pareto and control charts. High-yield changes were identified and simulated in computer and live settings prior to implementation. The primary outcome measure was the proportion of on-time first case starts; secondary outcomes included hospital costs, resident rounding time, and work hours. Data were compared with existing benchmarks. Prior to implementation, 39% of first cases started on time. Process mapping identified late resident arrival in preoperative holding as a cause of delayed first case starts. Resident rounding process inefficiencies were identified and changed through the use of checklists, standardization, and elimination of nonvalue-added activity. Following implementation of process improvements, first case on-time starts improved to 71% at 6 weeks (P = .002). Improvement was sustained with an 86% on-time rate at 1 year (P < .001). Resident rounding time was reduced by 33% (from 70 to 47 minutes). At 9 weeks following implementation, these changes generated an opportunity cost potential of $12,582. Use of Lean principles allowed rapid identification and implementation of perioperative process changes that improved efficiency and resulted in significant cost savings. This improvement was sustained at 1 year. Downstream effects included improved resident efficiency with decreased work hours. Copyright © 2013 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.

New method of control of tooth whitening

NASA Astrophysics Data System (ADS)

Angelov, I.; Mantareva, V.; Gisbrecht, A.; Valkanov, S.; Uzunov, Tz.

2010-10-01

New methods of control of tooth bleaching stages through simultaneous measurements of a reflected light and a fluorescence signal are proposed. It is shown that the bleaching process leads to significant changes in the intensity of a scattered signal and also in the shape and intensity of the fluorescence spectra. Experimental data illustrate that the bleaching process causes essential changes in the teeth discoloration in short time as 8-10 min from the beginning of the application procedure. The continuation of the treatment is not necessary moreover the probability of the enamel destroy increases considerably. The proposed optical back control of tooth surface is a base for development of a practical set up to control the duration of the bleaching procedure.

Personality traits and individual differences predict threat-induced changes in postural control.

PubMed

Zaback, Martin; Cleworth, Taylor W; Carpenter, Mark G; Adkin, Allan L

2015-04-01

This study explored whether specific personality traits and individual differences could predict changes in postural control when presented with a height-induced postural threat. Eighty-two healthy young adults completed questionnaires to assess trait anxiety, trait movement reinvestment (conscious motor processing, movement self-consciousness), physical risk-taking, and previous experience with height-related activities. Tests of static (quiet standing) and anticipatory (rise to toes) postural control were completed under low and high postural threat conditions. Personality traits and individual differences significantly predicted height-induced changes in static, but not anticipatory postural control. Individuals less prone to taking physical risks were more likely to lean further away from the platform edge and sway at higher frequencies and smaller amplitudes. Individuals more prone to conscious motor processing were more likely to lean further away from the platform edge and sway at larger amplitudes. Individuals more self-conscious about their movement appearance were more likely to sway at smaller amplitudes. Evidence is also provided that relationships between physical risk-taking and changes in static postural control are mediated through changes in fear of falling and physiological arousal. Results from this study may have indirect implications for balance assessment and treatment; however, further work exploring these factors in patient populations is necessary. Copyright © 2015 Elsevier B.V. All rights reserved.

Control of Reaction Kinetics During Friction Stir Processing

DOE PAGES

Das, Shamiparna; Martinez, Nelson Y.; Mishra, Rajiv S.; ...

2017-02-17

Friction stir processing (FSP) was used to successfully embed galfenol particles into aluminum (AA 1100 Al) matrix uniformly. But, intermetallic layer of Al 3Fe was formed around the galfenol particles. We estimated the activation energy for Al 3Fe formation during FSP, and attempts were made to minimize the Al 3Fe layer thickness. By changing the processing conditions, FSP successfully eliminated the intermetallic layer. Therefore, FSP, in addition to microstructural control, can successfully fabricate intermetallic-free embedded regions by controlling the reaction kinetics.

Processing and memory for emotional and neutral material in amyotrophic lateral sclerosis

PubMed Central

Cuddy, Marion; Papps, Benjamin J.; Thambisetty, Madhav; Leigh, P. Nigel; Goldstein, Laura H.

2018-01-01

Several studies have reported changes in emotional memory and processing in people with ALS (pwALS). In this study, we sought to analyse differences in emotional processing and memory between pwALS and healthy controls and to investigate the relationship between emotional memory and self-reported depression. Nineteen pwALS and 19 healthy controls were assessed on measures of emotional processing, emotional memory, verbal memory and depression. Although pwALS and controls did not differ significantly on measures of emotional memory, a subgroup of patients performed poorly on an emotional recognition task. With regard to emotional processing, pwALS gave significantly stronger ratings of emotional valence to positive words than to negative words. Higher ratings of emotional words were associated with better recall in controls but not pwALS. Self-reported depression and emotional processing or memory variables were not associated in either group. In conclusion, the results from this small study suggest that a subgroup of pwALS may show weakened ‘emotional enhancement’, although in the current sample this may reflect general memory impairment rather than specific changes in emotional memory. Nonetheless, different patterns of processing of emotionally-salient material by pwALS may have care and management-related implications. PMID:22873560

Voltage control in Z-source inverter using low cost microcontroller for undergraduate approach

NASA Astrophysics Data System (ADS)

Zulkifli, Shamsul Aizam; Sewang, Mohd Rizal; Salimin, Suriana; Shah, Noor Mazliza Badrul

2017-09-01

This paper is focussing on controlling the output voltage of Z-Source Inverter (ZSI) using a low cost microcontroller with MATLAB-Simulink that has been used for interfacing the voltage control at the output of ZSI. The key advantage of this system is the ability of a low cost microcontroller to process the voltage control blocks based on the mathematical equations created in MATLAB-Simulink. The Proportional Integral (PI) control equations are been applied and then, been downloaded to the microcontroller for observing the changes on the voltage output regarding to the changes on the reference on the PI. The system has been simulated in MATLAB and been verified with the hardware setup. As the results, the Raspberry Pi and Arduino that have been used in this work are able to respond well when there is a change of ZSI output. It proofed that, by applying/introducing this method to student in undergraduate level, it will help the student to understand more on the process of the power converter combine with a control feedback function that can be applied at low cost microcontroller.

A Journey to Improved Inpatient Glycemic Control by Redesigning Meal Delivery and Insulin Administration.

PubMed

Engle, Martha; Ferguson, Allison; Fields, Willa

2016-01-01

The purpose of this quality improvement project was to redesign a hospital meal delivery process in order to shorten the time between blood glucose monitoring and corresponding insulin administration and improve glycemic control. This process change redesigned the workflow of the dietary and nursing departments. Modifications included nursing, rather than dietary, delivering meal trays to patients receiving insulin. Dietary marked the appropriate meal trays and phoned each unit prior to arrival on the unit. The process change was trialed on 2 acute care units prior to implementation hospital wide. Elapsed time between blood glucose monitoring and insulin administration was analyzed before and after process change as well as evaluation of glucometrics: percentage of patients with blood glucose between 70 and 180 mg/dL (percent perfect), blood glucose greater than 300 mg/dL (extreme hyperglycemia), and blood glucose less than 70 mg/dL (hypoglycemia). Percent perfect glucose results improved from 45% to 53%, extreme hyperglycemia (blood glucose >300 mg/dL) fell from 11.7% to 5%. Hypoglycemia demonstrated a downward trend line, demonstrating that with improving glycemic control hypoglycemia rates did not increase. Percentage of patients receiving meal insulin within 30 minutes of blood glucose check increased from 35% to 73%. In the hospital, numerous obstacles were present that interfered with on-time meal insulin delivery. Establishing a meal delivery process with the nurse performing the premeal blood glucose check, delivering the meal, and administering the insulin improves overall blood glucose control. Nurse-led process improvement of blood glucose monitoring, meal tray delivery, and insulin administration does lead to improved glycemic control for the inpatient population.

Quality Risk Management: Putting GMP Controls First.

PubMed

O'Donnell, Kevin; Greene, Anne; Zwitkovits, Michael; Calnan, Nuala

2012-01-01

This paper presents a practical way in which current approaches to quality risk management (QRM) may be improved, such that they better support qualification, validation programs, and change control proposals at manufacturing sites. The paper is focused on the treatment of good manufacturing practice (GMP) controls during QRM exercises. It specifically addresses why it is important to evaluate and classify such controls in terms of how they affect the severity, probability of occurrence, and detection ratings that may be assigned to potential failure modes or negative events. It also presents a QRM process that is designed to directly link the outputs of risk assessments and risk control activities with qualification and validation protocols in the GMP environment. This paper concerns the need for improvement in the use of risk-based principles and tools when working to ensure that the manufacturing processes used to produce medicines, and their related equipment, are appropriate. Manufacturing processes need to be validated (or proven) to demonstrate that they can produce a medicine of the required quality. The items of equipment used in such processes need to be qualified, in order to prove that they are fit for their intended use. Quality risk management (QRM) tools can be used to support such qualification and validation activities, but their use should be science-based and subject to as little subjectivity and uncertainty as possible. When changes are proposed to manufacturing processes, equipment, or related activities, they also need careful evaluation to ensure that any risks present are managed effectively. This paper presents a practical approach to how QRM may be improved so that it better supports qualification, validation programs, and change control proposals in a more scientific way. This improved approach is based on the treatment of what are called good manufacturing process (GMP) controls during those QRM exercises. A GMP control can be considered to be any control that is put in place to assure product quality and regulatory compliance. This improved approach is also based on how the detectability of risks is assessed. This is important because when producing medicines, it is not always good practice to place a high reliance upon detection-type controls in the absence of an adequate level of assurance in the manufacturing process that leads to the finished medicine.

Inadequate interaction between open- and closed-loop postural control in phobic postural vertigo.

PubMed

Wuehr, M; Pradhan, C; Novozhilov, S; Krafczyk, S; Brandt, T; Jahn, K; Schniepp, R

2013-05-01

Phobic postural vertigo (PPV) is characterized by a subjective dizziness and postural imbalance. Changes in postural control strategy may cause the disturbed postural performance in PPV. A better understanding of the mechanisms behind this change in strategy is required to improve the diagnostic tools and therapeutic options for this prevalent disorder. Here we apply stabilogram diffusion analysis (SDA) to examine the characteristics and modes of interaction of open- and closed-loop processes that make up the postural control scheme in PPV. Twenty patients with PPV and 20 age-matched healthy controls were recorded on a stabilometer platform with eyes open and with eyes closed. Spatio-temporal changes of the center of pressure (CoP) displacement were analyzed by means of SDA and complementary CoP amplitude measures. (1) Open-loop control mechanisms in PPV were disturbed because of a higher diffusion activity (p < 0.001). (2) The interaction of open- and closed-loop processes was altered in that the sensory feedback threshold of the system was lowered (p = 0.010). These two changes were comparable to those observed in healthy subjects during more demanding balance conditions such as standing with eyes closed. These data indicate that subjective imbalance in PPV is associated with characteristic changes in the coordination of open- and closed-loop mechanisms of postural control. Patients with PPV use sensory feedback inadequately during undisturbed stance, and this impairs postural performance. These changes are compatible with higher levels of anti-gravity muscle activity and co-contraction during the conscious concentration on control of postural stability.

Validation of a Turkish Version of the Profiles of Organizational Influence Strategies

ERIC Educational Resources Information Center

Cetin, Saadet Kuru; Cinkir, Sakir

2016-01-01

Influencing others is at the heart of the management process. Managers use the influencing process for the purposes of controlling workers, using limited sources, implementing organizational change, breaking down the resistance of workers to this change, and enhancing the performance of workers of different from the managers' backgrounds. This…

Statistical Process Control for KSC Processing

NASA Technical Reports Server (NTRS)

Ford, Roger G.; Delgado, Hector; Tilley, Randy

1996-01-01

The 1996 Summer Faculty Fellowship Program and Kennedy Space Center (KSC) served as the basis for a research effort into statistical process control for KSC processing. The effort entailed several tasks and goals. The first was to develop a customized statistical process control (SPC) course for the Safety and Mission Assurance Trends Analysis Group. The actual teaching of this course took place over several weeks. In addition, an Internet version of the same course complete with animation and video excerpts from the course when it was taught at KSC was developed. The application of SPC to shuttle processing took up the rest of the summer research project. This effort entailed the evaluation of SPC use at KSC, both present and potential, due to the change in roles for NASA and the Single Flight Operations Contractor (SFOC). Individual consulting on SPC use was accomplished as well as an evaluation of SPC software for KSC use in the future. A final accomplishment of the orientation of the author to NASA changes, terminology, data format, and new NASA task definitions will allow future consultation when the needs arise.

Drunk, but not blind: the effects of alcohol intoxication on change blindness.

PubMed

Colflesh, Gregory J H; Wiley, Jennifer

2013-03-01

Alcohol use has long been assumed to alter cognition via attentional processes. To better understand the cognitive consequences of intoxication, the present study tested the effects of moderate intoxication (average BAC between .071 and .082) on attentional processing using complex working memory capacity (WMC) span tasks and a change blindness task. Intoxicated and sober participants were matched on baseline WMC performance, and intoxication significantly decreased performance on the complex span tasks. Surprisingly, intoxication improved performance on the change blindness task. The results are interpreted as evidence that intoxication decreases attentional control, causing either a shift towards more passive processing and/or a more diffuse attentional state. This may result in decreased performance on tasks where attentional control or focus are required, but may actually facilitate performance in some contexts. Copyright © 2013 Elsevier Inc. All rights reserved.

WHEN TOBACCO TARGETS DIRECT DEMOCRACY

PubMed Central

Laposata, Elizabeth; Kennedy, Allison P.

2013-01-01

Tobacco control advocates began to use ballot initiatives to enact tobacco control policies in the late 1970s. In response, the tobacco industry worked for over two decades to change laws governing initiative and referendum processes to prevent passage of tobacco control measures. In 1981, the tobacco industry’s political lobbying arm, the Tobacco Institute, created a front group that presented itself as a neutral initiative research clearinghouse to affect changes in state initiative and referenda laws. In 1990, the Tobacco Institute began creating an in-house team, and worked with third party groups to try to change state initiative laws. While the industry ultimately abandoned both efforts when neither achieved immediate success, over time, the industry’s goals have penetrated legitimate discourse on the I&R process in the United States and many specific ideas it advocated have garnered mainstream support. Direct democracy advocates, as well as public health advocates and policymakers, need to understand the tobacco industry’s goals (which other industries adopted) of limiting the direct democracy process in order to ensure that any changes do not inadvertently increase the power of the special interests that direct democracy was developed to counterbalance. PMID:24603083

Impact of processing on the bioavailability and vascular effects of blueberry (poly)phenols.

PubMed

Rodriguez-Mateos, Ana; Del Pino-García, Raquel; George, Trevor W; Vidal-Diez, Alberto; Heiss, Christian; Spencer, Jeremy P E

2014-10-01

Blueberries are a rich source of flavonoids and phenolic acids. Currently, little information is available regarding the impact of processing on the bioavailability and the bioactivity of blueberry (poly)phenols. In a randomized, controlled crossover trial, ten healthy volunteers consumed (a) blueberry-containing baked products, (b) an unprocessed blueberry drink containing the same amount of freeze-dried blueberry powder as used in the baked products, and (c) matched control baked products. Endothelial function was measured as flow-mediated dilation (FMD) and plasma samples taken at baseline and at 1, 2, 4, and 6 h postconsumption. Although processing did not significantly change the total (poly)phenolic amount, the processed products contained significantly less anthocyanins (-42%), more chlorogenic acid (23%), no flavanol nonamers or decamers, and significantly more flavanol dimers and trimers (36% and 28%, respectively). FMD increased after 1, 2, and 6 h consumption of the baked products to a similar degree as the unprocessed blueberries, despite significant differences in the levels of individual plasma metabolites. No changes were observed after the consumption of the control product. Careful processing can preserve important biological activities of blueberries despite changing the blueberry (poly)phenol composition and plasma metabolite profile. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Automatic Processing of Changes in Facial Emotions in Dysphoria: A Magnetoencephalography Study.

PubMed

Xu, Qianru; Ruohonen, Elisa M; Ye, Chaoxiong; Li, Xueqiao; Kreegipuu, Kairi; Stefanics, Gabor; Luo, Wenbo; Astikainen, Piia

2018-01-01

It is not known to what extent the automatic encoding and change detection of peripherally presented facial emotion is altered in dysphoria. The negative bias in automatic face processing in particular has rarely been studied. We used magnetoencephalography (MEG) to record automatic brain responses to happy and sad faces in dysphoric (Beck's Depression Inventory ≥ 13) and control participants. Stimuli were presented in a passive oddball condition, which allowed potential negative bias in dysphoria at different stages of face processing (M100, M170, and M300) and alterations of change detection (visual mismatch negativity, vMMN) to be investigated. The magnetic counterpart of the vMMN was elicited at all stages of face processing, indexing automatic deviance detection in facial emotions. The M170 amplitude was modulated by emotion, response amplitudes being larger for sad faces than happy faces. Group differences were found for the M300, and they were indexed by two different interaction effects. At the left occipital region of interest, the dysphoric group had larger amplitudes for sad than happy deviant faces, reflecting negative bias in deviance detection, which was not found in the control group. On the other hand, the dysphoric group showed no vMMN to changes in facial emotions, while the vMMN was observed in the control group at the right occipital region of interest. Our results indicate that there is a negative bias in automatic visual deviance detection, but also a general change detection deficit in dysphoria.

Developing a complex intervention for diet and activity behaviour change in obese pregnant women (the UPBEAT trial); assessment of behavioural change and process evaluation in a pilot randomised controlled trial.

PubMed

Poston, Lucilla; Briley, Annette L; Barr, Suzanne; Bell, Ruth; Croker, Helen; Coxon, Kirstie; Essex, Holly N; Hunt, Claire; Hayes, Louise; Howard, Louise M; Khazaezadeh, Nina; Kinnunen, Tarja; Nelson, Scott M; Oteng-Ntim, Eugene; Robson, Stephen C; Sattar, Naveed; Seed, Paul T; Wardle, Jane; Sanders, Thomas A B; Sandall, Jane

2013-07-15

Complex interventions in obese pregnant women should be theoretically based, feasible and shown to demonstrate anticipated behavioural change prior to inception of large randomised controlled trials (RCTs). The aim was to determine if a) a complex intervention in obese pregnant women leads to anticipated changes in diet and physical activity behaviours, and b) to refine the intervention protocol through process evaluation of intervention fidelity. We undertook a pilot RCT of a complex intervention in obese pregnant women, comparing routine antenatal care with an intervention to reduce dietary glycaemic load and saturated fat intake, and increase physical activity. Subjects included 183 obese pregnant women (mean BMI 36.3 kg/m2). Compared to women in the control arm, women in the intervention arm had a significant reduction in dietary glycaemic load (33 points, 95% CI -47 to -20), (p < 0.001) and saturated fat intake (-1.6% energy, 95% CI -2.8 to -0. 3) at 28 weeks' gestation. Objectively measured physical activity did not change. Physical discomfort and sustained barriers to physical activity were common at 28 weeks' gestation. Process evaluation identified barriers to recruitment, group attendance and compliance, leading to modification of intervention delivery. This pilot trial of a complex intervention in obese pregnant women suggests greater potential for change in dietary intake than for change in physical activity, and through process evaluation illustrates the considerable advantage of performing an exploratory trial of a complex intervention in obese pregnant women before undertaking a large RCT. ISRCTN89971375.

Climate Change Impacts on Sediment Transport In a Lowland Watershed System: Controlling Processes and Projection

NASA Astrophysics Data System (ADS)

al Aamery, N. M. H.; Mahoney, D. T.; Fox, J.

2017-12-01

Future climate change projections suggest extreme impacts on watershed hydrologic systems for some regions of the world including pronounced increases in surface runoff and instream flows. Yet, there remains a lack of research focused on how future changes in hydrologic extremes, as well as relative hydrologic mean changes, impact sediment redistribution within a watershed and sediment flux from a watershed. The authors hypothesized that variations in mean and extreme changes in turn may impact sediments in depositional and erosional dominance in a manner that may not be obvious to the watershed manager. Therefore, the objectives of this study were to investigate the inner processes connecting the combined effect of extreme climate change projections on the vegetation, upland erosion, and instream processes to produce changes in sediment redistribution within watersheds. To do so, research methods were carried out by the authors including simulating sediment processes in forecast and hindcast periods for a lowland watershed system. Publically available climate realizations from several climate factors and the Soil Water Assessment Tool (SWAT) were used to predict hydrologic conditions for the South Elkhorn Watershed in central Kentucky, USA to 2050. The results of the simulated extreme and mean hydrological components were used in simulating upland erosion with the connectivity processes consideration and thereafter used in building and simulating the instream erosion and deposition of sediment processes with the consideration of surface fine grain lamina (SFGL) layer controlling the benthic ecosystem. Results are used to suggest the dominance of erosional and depositional redistribution of sediments under different scenarios associated with extreme and mean hydrologic forecasting. The results are discussed in reference to the benthic ecology of the stream system providing insight on how water managers might consider sediment redistribution in a changing climate.

Design of an embedded inverse-feedforward biomolecular tracking controller for enzymatic reaction processes.

PubMed

Foo, Mathias; Kim, Jongrae; Sawlekar, Rucha; Bates, Declan G

2017-04-06

Feedback control is widely used in chemical engineering to improve the performance and robustness of chemical processes. Feedback controllers require a 'subtractor' that is able to compute the error between the process output and the reference signal. In the case of embedded biomolecular control circuits, subtractors designed using standard chemical reaction network theory can only realise one-sided subtraction, rendering standard controller design approaches inadequate. Here, we show how a biomolecular controller that allows tracking of required changes in the outputs of enzymatic reaction processes can be designed and implemented within the framework of chemical reaction network theory. The controller architecture employs an inversion-based feedforward controller that compensates for the limitations of the one-sided subtractor that generates the error signals for a feedback controller. The proposed approach requires significantly fewer chemical reactions to implement than alternative designs, and should have wide applicability throughout the fields of synthetic biology and biological engineering.

Using Statistical Process Control to Drive Improvement in Neonatal Care: A Practical Introduction to Control Charts.

PubMed

Gupta, Munish; Kaplan, Heather C

2017-09-01

Quality improvement (QI) is based on measuring performance over time, and variation in data measured over time must be understood to guide change and make optimal improvements. Common cause variation is natural variation owing to factors inherent to any process; special cause variation is unnatural variation owing to external factors. Statistical process control methods, and particularly control charts, are robust tools for understanding data over time and identifying common and special cause variation. This review provides a practical introduction to the use of control charts in health care QI, with a focus on neonatology. Copyright © 2017 Elsevier Inc. All rights reserved.

Shared Savings Contracting for Reducing Energy Costs of Defense Facilities.

DTIC Science & Technology

1983-01-01

also needs additional -4 operation and maintenance help, especially if new equipment is involved. New equipment with sophisticated control technology...process may take time to develop and may be " difficult to integrate with existing financial control practices. For example, the regulations and...will seek a change order on the contract. The potential for such changes, if not controlled , seriously undermines the value of these contracts. DoD

Present state of knowledge of the upper atmosphere: An assessment report; processes that control ozone and other climatically important trace gases

NASA Technical Reports Server (NTRS)

Watson, R. T.; Geller, M. A.; Stolarski, R. S.; Hampson, R. F.

1986-01-01

The state of knowledge of the upper atmosphere was assessed as of January 1986. The physical, chemical, and radiative processes which control the spatial and temporal distribution of ozone in the atmosphere; the predicted magnitude of ozone perturbations and climate changes for a variety of trace gas scenarios; and the ozone and temperature data used to detect the presence or absence of a long term trend were discussed. This assessment report was written by a small group of NASA scientists, was peer reviewed, and is based primarily on the comprehensive international assessment document entitled Atmospheric Ozone 1985: Assessment of Our Understanding of the Processes Controlling Its Present Distribution and Change, to be published as the World Meteorological Organization Global Ozone Research and Monitoring Project Report No. 16.

Searching for the Self: An Identity Control Theory Approach to Triggers of Occupational Exploration

ERIC Educational Resources Information Center

Anderson, Katherine L.; Mounts, Nina S.

2012-01-01

Identity control theory researchers have found evidence for two processes of identity development (identity defense and identity change) and have theorized a third process (identity exploration). College students (N = 123) self-rated as high or low in occupational identity certainty and importance received self-discrepant feedback to induce…

MULTI-SCALE CONTROLS ON AND CONSEQUENCES OF AEOLIAN PROCESSES IN LANDSCAPE CHANGE IN ARID AND SEMI-ARID ENVIRONMENTS

EPA Science Inventory

This paper reviews the controls on aeolian processes and their consequences at plant-interspace, patch-landscape, and regional-global scales. Based on this review, we define the requirements for a cross-scale model of wind erosion in structurally complex arid and semiarid ecosyst...

Altered visual perception in long-term ecstasy (MDMA) users.

PubMed

White, Claire; Brown, John; Edwards, Mark

2013-09-01

The present study investigated the long-term consequences of ecstasy use on visual processes thought to reflect serotonergic functions in the occipital lobe. Evidence indicates that the main psychoactive ingredient in ecstasy (methylendioxymethamphetamine) causes long-term changes to the serotonin system in human users. Previous research has found that amphetamine-abstinent ecstasy users have disrupted visual processing in the occipital lobe which relies on serotonin, with researchers concluding that ecstasy broadens orientation tuning bandwidths. However, other processes may have accounted for these results. The aim of the present research was to determine if amphetamine-abstinent ecstasy users have changes in occipital lobe functioning, as revealed by two studies: a masking study that directly measured the width of orientation tuning bandwidths and a contour integration task that measured the strength of long-range connections in the visual cortex of drug users compared to controls. Participants were compared on the width of orientation tuning bandwidths (26 controls, 12 ecstasy users, 10 ecstasy + amphetamine users) and the strength of long-range connections (38 controls, 15 ecstasy user, 12 ecstasy + amphetamine users) in the occipital lobe. Amphetamine-abstinent ecstasy users had significantly broader orientation tuning bandwidths than controls and significantly lower contour detection thresholds (CDTs), indicating worse performance on the task, than both controls and ecstasy + amphetamine users. These results extend on previous research, which is consistent with the proposal that ecstasy may damage the serotonin system, resulting in behavioral changes on tests of visual perception processes which are thought to reflect serotonergic functions in the occipital lobe.

Epigenetic regulation and chromatin remodeling in learning and memory.

PubMed

Kim, Somi; Kaang, Bong-Kiun

2017-01-13

Understanding the underlying mechanisms of memory formation and maintenance has been a major goal in the field of neuroscience. Memory formation and maintenance are tightly controlled complex processes. Among the various processes occurring at different levels, gene expression regulation is especially crucial for proper memory processing, as some genes need to be activated while some genes must be suppressed. Epigenetic regulation of the genome involves processes such as DNA methylation and histone post-translational modifications. These processes edit genomic properties or the interactions between the genome and histone cores. They then induce structural changes in the chromatin and lead to transcriptional changes of different genes. Recent studies have focused on the concept of chromatin remodeling, which consists of 3D structural changes in chromatin in relation to gene regulation, and is an important process in learning and memory. In this review, we will introduce three major epigenetic processes involved in memory regulation: DNA methylation, histone methylation and histone acetylation. We will also discuss general mechanisms of long-term memory storage and relate the epigenetic control of learning and memory to chromatin remodeling. Finally, we will discuss how epigenetic mechanisms can contribute to the pathologies of neurological disorders and cause memory-related symptoms.

Effective solutions for monitoring the electrostatic separation of metal and plastic granular waste from electric and electronic equipment.

PubMed

Senouci, Khouira; Medles, Karim; Dascalescu, Lucian

2013-02-01

The variability of the quantity and purity of the recovered materials is a serious drawback for the application of electrostatic separation technologies to the recycling of granular wastes. In a series of previous articles we have pointed out how capability and classic control chart concepts could be employed for better mastering the outcome of such processes. In the present work, the multiple exponentially weighted moving average (MEWMA) control chart is introduced and shown to be more effective than the Hotelling T2 chart for monitoring slow varying changes in the electrostatic separation of granular mixtures originating from electric and electronic equipment waste. The operation of the industrial process was simulated by using a laboratory roll-type electrostatic separator and granular samples resulting from shredded electric cable wastes. The 25 tests carried out during the observation phase enabled the calculation of the upper and lower control limits for the two control charts considered in the present study. The 11 additional tests that simulated the monitoring phase pointed out that the MEWMA chart is more effective than Hotelling's T(2) chart in detecting slow varying changes in the outcome of a process. As the reverse is true in the case of abrupt alterations of monitored process performances, simultaneous usage of the two control charts is strongly recommended. While this study focused on a specific electrostatic separation process, using the MEWMA chart together with the well known Hotelling's T(2) chart should be applicable to the statistical control of other complex processes in the field of waste processing.

Redox control of plant growth and development.

PubMed

Kocsy, Gábor; Tari, Irma; Vanková, Radomíra; Zechmann, Bernd; Gulyás, Zsolt; Poór, Péter; Galiba, Gábor

2013-10-01

Redox changes determined by genetic and environmental factors display well-organized interactions in the control of plant growth and development. Diurnal and seasonal changes in the environmental conditions are important for the normal course of these physiological processes and, similarly to their mild irregular alterations, for stress adaptation. However, fast or large-scale environmental changes may lead to damage or death of sensitive plants. The spatial and temporal redox changes influence growth and development due to the reprogramming of metabolism. In this process reactive oxygen and nitrogen species and antioxidants are involved as components of signalling networks. The control of growth, development and flowering by reactive oxygen and nitrogen species and antioxidants in interaction with hormones at organ, tissue, cellular and subcellular level will be discussed in the present review. Unsolved problems of the field, among others the need for identification of new components and interactions in the redox regulatory network at various organization levels using systems biology approaches will be also indicated. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ermi, A.M.

1997-05-01

Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new crediblemore » failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status.« less

29 CFR 1910.95 - Occupational noise exposure.

Code of Federal Regulations, 2012 CFR

2012-07-01

... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.95 Occupational... engineering controls shall be utilized. If such controls fail to reduce sound levels within the levels of...) Monitoring shall be repeated whenever a change in production, process, equipment or controls increases noise...

29 CFR 1910.95 - Occupational noise exposure.

Code of Federal Regulations, 2014 CFR

2014-07-01

... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.95 Occupational... engineering controls shall be utilized. If such controls fail to reduce sound levels within the levels of...) Monitoring shall be repeated whenever a change in production, process, equipment or controls increases noise...

29 CFR 1910.95 - Occupational noise exposure.

Code of Federal Regulations, 2011 CFR

2011-07-01

... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.95 Occupational... engineering controls shall be utilized. If such controls fail to reduce sound levels within the levels of...) Monitoring shall be repeated whenever a change in production, process, equipment or controls increases noise...

Neural correlates of atomoxetine improving inhibitory control and visual processing in Drug-naïve adults with attention-deficit/hyperactivity disorder.

PubMed

Fan, Li-Ying; Chou, Tai-Li; Gau, Susan Shur-Fen

2017-10-01

Atomoxetine improves inhibitory control and visual processing in healthy volunteers and adults with attention-deficit/hyperactivity disorder (ADHD). However, little is known about the neural correlates of these two functions after chronic treatment with atomoxetine. This study aimed to use the counting Stroop task with functional magnetic resonance imaging (fMRI) and the Cambridge Neuropsychological Test Automated Battery (CANTAB) to investigate the changes related to inhibitory control and visual processing in adults with ADHD. This study is an 8-week, placebo-controlled, double-blind, randomized clinical trial of atomoxetine in 24 drug-naïve adults with ADHD. We investigated the changes of treatment with atomoxetine compared to placebo-treated counterparts using the counting Stroop fMRI and two CANTAB tests: rapid visual information processing (RVP) for inhibitory control and delayed matching to sample (DMS) for visual processing. Atomoxetine decreased activations in the right inferior frontal gyrus and anterior cingulate cortex, which were correlated with the improvement in inhibitory control assessed by the RVP. Also, atomoxetine increased activation in the left precuneus, which was correlated with the improvement in the mean latency of correct responses assessed by the DMS. Moreover, anterior cingulate activation in the pre-treatment was able to predict the improvements of clinical symptoms. Treatment with atomoxetine may improve inhibitory control to suppress interference and may enhance the visual processing to process numbers. In addition, the anterior cingulate cortex might play an important role as a biological marker for the treatment effectiveness of atomoxetine. Hum Brain Mapp 38:4850-4864, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Transient performance analysis of the master cylinder hydraulic system of a 6.3 MN fineblanking press

NASA Astrophysics Data System (ADS)

Yi, Guodong; Li, Jin

2018-03-01

The master cylinder hydraulic system is the core component of the fineblanking press that seriously affects the machine performance. A key issue in the design of the master cylinder hydraulic system is dealing with the heavy shock loads in the fineblanking process. In this paper, an equivalent model of the master cylinder hydraulic system is established based on typical process parameters for practical fineblanking; then, the response characteristics of the master cylinder slider to the step changes in the load and control current are analyzed, and lastly, control strategies for the proportional valve are studied based on the impact of the control parameters on the kinetic stability of the slider. The results show that the kinetic stability of the slider is significantly affected by the step change of the control current, while it is slightly affected by the step change of the system load, which can be improved by adjusting the flow rate and opening time of the proportional valve.

Applying the Quadruple Process model to evaluate change in implicit attitudinal responses during therapy for panic disorder.

PubMed

Clerkin, Elise M; Fisher, Christopher R; Sherman, Jeffrey W; Teachman, Bethany A

2014-01-01

This study explored the automatic and controlled processes that may influence performance on an implicit measure across cognitive-behavioral group therapy for panic disorder. The Quadruple Process model was applied to error scores from an Implicit Association Test evaluating associations between the concepts Me (vs. Not Me) + Calm (vs. Panicked) to evaluate four distinct processes: Association Activation, Detection, Guessing, and Overcoming Bias. Parameter estimates were calculated in the panic group (n = 28) across each treatment session where the IAT was administered, and at matched times when the IAT was completed in the healthy control group (n = 31). Association Activation for Me + Calm became stronger over treatment for participants in the panic group, demonstrating that it is possible to change automatically activated associations in memory (vs. simply overriding those associations) in a clinical sample via therapy. As well, the Guessing bias toward the calm category increased over treatment for participants in the panic group. This research evaluates key tenets about the role of automatic processing in cognitive models of anxiety, and emphasizes the viability of changing the actual activation of automatic associations in the context of treatment, versus only changing a person's ability to use reflective processing to overcome biased automatic processing. Copyright © 2013 Elsevier Ltd. All rights reserved.

Decentralized Control of Scheduling in Distributed Systems.

DTIC Science & Technology

1983-03-18

the job scheduling algorithm adapts to the changing busyness of the various hosts in the system. The environment in which the job scheduling entities...resources and processes that constitute the node and a set of interfaces for accessing these processes and resources. The structure of a node could change ...parallel. Chang [CHNG82] has also described some algorithms for detecting properties of general graphs by traversing paths in a graph in parallel. One of

40 CFR 63.492 - Batch front-end process vents-reporting requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... change within 180 days after the process change is made or with the next Periodic Report, whichever is... made or with the next Periodic Report, whichever is later. The following information shall be submitted... control device other than those specified in § 63.489(b) and listed in Table 6 of this subpart or requests...

40 CFR 63.492 - Batch front-end process vents-reporting requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... change within 180 days after the process change is made or with the next Periodic Report, whichever is... made or with the next Periodic Report, whichever is later. The following information shall be submitted... control device other than those specified in § 63.489(b) and listed in Table 6 of this subpart or requests...

40 CFR 63.492 - Batch front-end process vents-reporting requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... change within 180 days after the process change is made or with the next Periodic Report, whichever is... made or with the next Periodic Report, whichever is later. The following information shall be submitted... control device other than those specified in § 63.489(b) and listed in Table 6 of this subpart or requests...

Korea Air Force and Organization Development: Is There Potential for It?

DTIC Science & Technology

1982-12-01

control the situation or the client. (5) He must avoid defending, advising, premature persuation , and over-controlling. (6) The change agent must build in... negotiate a contract. The use of the term "contract" by Kolb and Frohman is "to define if and how the succeeding stages of the planned change process will be

Self-Renewal, Personal Development and Change: An Inexorable Link.

ERIC Educational Resources Information Center

Krupp, Judy-Arin

1995-01-01

Self-renewal, personal development, and change create an inexorable link. Change management processes include the following: (1) internal locus of control; (2) freedom from institutional crutches; (3) flexible teaching; (4) recognition of emotional reactions to change; and (5) identification of the causes of indecisiveness and insecurities. (JOW)

The protocol and design of a randomised controlled study on training of attention within the first year after acquired brain injury.

PubMed

Bartfai, Aniko; Markovic, Gabriela; Sargenius Landahl, Kristina; Schult, Marie-Louise

2014-05-08

To describe the design of the study aiming to examine intensive targeted cognitive rehabilitation of attention in the acute (<4 months) and subacute rehabilitation phases (4-12 months) after acquired brain injury and to evaluate the effects on function, activity and participation (return to work). Within a prospective, randomised, controlled study 120 consecutive patients with stroke or traumatic brain injury were randomised to 20 hours of intensive attention training by Attention Process Training or by standard, activity based training. Progress was evaluated by Statistical Process Control and by pre and post measurement of functional and activity levels. Return to work was also evaluated in the post-acute phase. Primary endpoints were the changes in the attention measure, Paced Auditory Serial Addition Test and changes in work ability. Secondary endpoints included measurement of cognitive functions, activity and work return. There were 3, 6 and 12-month follow ups focussing on health economics. The study will provide information on rehabilitation of attention in the early phases after ABI; effects on function, activity and return to work. Further, the application of Statistical Process Control might enable closer investigation of the cognitive changes after acquired brain injury and demonstrate the usefulness of process measures in rehabilitation. The study was registered at ClinicalTrials.gov Protocol. NCT02091453, registered: 19 March 2014.

One year analysis of time-lapse electrical data on a clayey landslide: identification of elementary hydrological processes

NASA Astrophysics Data System (ADS)

Gance, Julien; Sailhac, Pascal; Malet, Jean-Philippe; Supper, Robert; Jochum, Birgit; Ottowittz, David; Grandjean, Gilles

2014-05-01

Water infiltration, evaporation and runoff are responsible of changes in the topsoil water content and can influence slope stability which is very often the main controlling factor of landslide triggering. In this work, time-lapse monitoring of electrical conductivity is used to observe variations in soil water contents. Based on recent work which demonstrated the possibility of monitoring the hydrological response of a clayey slope to controlled rainfall experiments, we installed an electrical monitoring system at the Super-Sauze landslide for long-term observation. We used the GEOMON4D resistivimeter (developed by the Austrian Geological Surve) and specifically designed for experiments needing high rate of data acquisition, records of full signal samples for noise detection, remote controlled management and automatic data transfer. The electrode positions varying with time, we installed two cameras to control the position of the electrodes. Several hydrological sensors were also installed along the profile to measure soil temperature, groundwater temperature, groundwater level, groundwater conductivity and soil humidity. The challenge is the processing of 4.2 million of electrical resistivity data. In this difficult context, the possible factors controlling changes in resistivity values are the movement of the electrodes, the soil and water temperature, the change of porosity due to compaction and the soil degree of saturation. Therefore, before any inversion, the presence of possible 3D effects, and the measurement accuracy and uncertainty are assessed. A threshold in apparent resistivity change that could correspond to a change in soil saturation is determined. From those results, we investigate variations in the apparent resistivity. Responses to different hydrological processes (soil freezing/thawing, snow-melting, intense rainfall) occurring during the period of study are detected on resistivity values inversed on short periods.

Automatic/Control Processing and Attention.

DTIC Science & Technology

1982-04-01

changes that occur with practice have lead many researchers to propose that qualitative changes occur in the processing (e.g., James, 1890; LaBerge ...functions are similar. Perception & Psychophvsics, 1972, 12, 378-3G4. (b) March 26, 19C2 Page 22 LaBerge , D. Acquisition of automatic processing in... LaBerge & S. J. Samuels (Eds.), Lasic Proc7’-.es in reading: Perception and comprehension. Hillsdale, N.J.: Schneider, W., & Shiffrin, R. M

29 CFR 1910.1047 - Ethylene oxide.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., rupture of containers, or failure of control equipment that is likely to or does result in an unexpected... there has been a change in the production, process, control equipment, personnel or work practices that... controls and work practices. (i) The employer shall institute engineering controls and work practices to...

Changes in connectivity of the posterior default network node during visual processing in mild cognitive impairment: staged decline between normal aging and Alzheimer's disease.

PubMed

Krajcovicova, Lenka; Barton, Marek; Elfmarkova-Nemcova, Nela; Mikl, Michal; Marecek, Radek; Rektorova, Irena

2017-12-01

Visual processing difficulties are often present in Alzheimer's disease (AD), even in its pre-dementia phase (i.e. in mild cognitive impairment, MCI). The default mode network (DMN) modulates the brain connectivity depending on the specific cognitive demand, including visual processes. The aim of the present study was to analyze specific changes in connectivity of the posterior DMN node (i.e. the posterior cingulate cortex and precuneus, PCC/P) associated with visual processing in 17 MCI patients and 15 AD patients as compared to 18 healthy controls (HC) using functional magnetic resonance imaging. We used psychophysiological interaction (PPI) analysis to detect specific alterations in PCC connectivity associated with visual processing while controlling for brain atrophy. In the HC group, we observed physiological changes in PCC connectivity in ventral visual stream areas and with PCC/P during the visual task, reflecting the successful involvement of these regions in visual processing. In the MCI group, the PCC connectivity changes were disturbed and remained significant only with the anterior precuneus. In between-group comparison, we observed significant PPI effects in the right superior temporal gyrus in both MCI and AD as compared to HC. This change in connectivity may reflect ineffective "compensatory" mechanism present in the early pre-dementia stages of AD or abnormal modulation of brain connectivity due to the disease pathology. With the disease progression, these changes become more evident but less efficient in terms of compensation. This approach can separate the MCI from HC with 77% sensitivity and 89% specificity.

Forest ecosystems: Vegetation, disturbance, and economics: Chapter 5

USGS Publications Warehouse

Littell, Jeremy S.; Hicke, Jeffrey A.; Shafer, Sarah L.; Capalbo, Susan M.; Houston, Laurie L.; Glick, Patty

2013-01-01

Forests cover about 47% of the Northwest (NW–Washington, Oregon, and Idaho) (Smith et al. 2009, fig. 5.1, table 5.1). The impacts of current and future climate change on NW forest ecosystems are a product of the sensitivities of ecosystem processes to climate and the degree to which humans depend on and interact with those systems. Forest ecosystem structure and function, particularly in relatively unmanaged forests where timber harvest and other land use have smaller effects, is sensitive to climate change because climate has a strong influence on ecosystem processes. Climate can affect forest structure directly through its control of plan physiology and life history (establishment, individual growth, productivity, and morality) or indirectly through its control of disturbance (fire, insects, disease). As climate changes, many forest processes will be affected, altering ecosystem services such as timber production and recreation. These changes have socioeconomic implications (e.g. for timber economies) and will require changes to current management of forests. Climate and management will interact to determine the forests of the future, and the scientific basis for adaptation to climate change in forests thus depends significantly on how forests will be affected.

Temperature and melt solid interface control during crystal growth

NASA Technical Reports Server (NTRS)

Batur, Celal

1990-01-01

Findings on the adaptive control of a transparent Bridgman crystal growth furnace are summarized. The task of the process controller is to establish a user specified axial temperature profile by controlling the temperatures in eight heating zones. The furnace controller is built around a computer. Adaptive PID (Proportional Integral Derivative) and Pole Placement control algorithms are applied. The need for adaptive controller stems from the fact that the zone dynamics changes with respect to time. The controller was tested extensively on the Lead Bromide crystal growth. Several different temperature profiles and ampoule's translational rates are tried. The feasibility of solid liquid interface quantification by image processing was determined. The interface is observed by a color video camera and the image data file is processed to determine if the interface is flat, convex or concave.

[Monitoring method of extraction process for Schisandrae Chinensis Fructus based on near infrared spectroscopy and multivariate statistical process control].

PubMed

Xu, Min; Zhang, Lei; Yue, Hong-Shui; Pang, Hong-Wei; Ye, Zheng-Liang; Ding, Li

2017-10-01

To establish an on-line monitoring method for extraction process of Schisandrae Chinensis Fructus, the formula medicinal material of Yiqi Fumai lyophilized injection by combining near infrared spectroscopy with multi-variable data analysis technology. The multivariate statistical process control (MSPC) model was established based on 5 normal batches in production and 2 test batches were monitored by PC scores, DModX and Hotelling T2 control charts. The results showed that MSPC model had a good monitoring ability for the extraction process. The application of the MSPC model to actual production process could effectively achieve on-line monitoring for extraction process of Schisandrae Chinensis Fructus, and can reflect the change of material properties in the production process in real time. This established process monitoring method could provide reference for the application of process analysis technology in the process quality control of traditional Chinese medicine injections. Copyright© by the Chinese Pharmaceutical Association.

Cognitive switching processes in young people with attention-deficit/hyperactivity disorder.

PubMed

Oades, Robert D; Christiansen, Hanna

2008-01-01

Patients with attention-deficit/hyperactivity disorder (ADHD) can be slow at switching between stimuli, or between sets of stimuli to control behaviour appropriate to changing situations. We examined clinical and experimental parameters that may influence the speed of such processes measured in the trail-making (TMT) and switch-tasks in cases with ADHD combined type, their non-affected siblings and unrelated healthy controls. The latency for completion of the trail-making task controlling for psychomotor processing (TMT-B-A) was longer for ADHD cases, and correlated with Conners' ratings of symptom severity across all subjects. The effect decreased with age. Switch-task responses to questions of "Which number?" and "How many?" between sets of 1/111 or 3/333 elicited differential increases in latency with condition that affected all groups. But there was evidence for increased symptom-related intra-individual variability among the ADHD cases, and across all subjects. Young siblings showed familiality for some measures of TMT and switch-task performance but these were modest. The potential influences of moderator variables on the efficiency of processing stimulus change rather than the speed of processing are discussed.

Effects of Pain Acceptance and Pain Control Strategies on Physical Impairment in Individuals with Chronic Low Back Pain

ERIC Educational Resources Information Center

Vowles, Kevin E.; McNeil, Daniel W.; Gross, Richard T.; McDaniel, Michael L.; Mouse, Angela; Bates, Mick; Gallimore, Paula; McCall, Cindy

2007-01-01

Psychosocial treatments for chronic pain are effective. There is a need, however, to understand the processes involved in determining how these treatments contribute to behavior change. Control and acceptance strategies represent two potentially important processes involved in treatment, although they differ significantly in approach. Results from…

Shift changes, updates, and the on-call architecture in space shuttle mission control.

PubMed

Patterson, E S; Woods, D D

2001-01-01

In domains such as nuclear power, industrial process control, and space shuttle mission control, there is increased interest in reducing personnel during nominal operations. An essential element in maintaining safe operations in high risk environments with this 'on-call' organizational architecture is to understand how to bring called-in practitioners up to speed quickly during escalating situations. Targeted field observations were conducted to investigate what it means to update a supervisory controller on the status of a continuous, anomaly-driven process in a complex, distributed environment. Sixteen shift changes, or handovers, at the NASA Johnson Space Center were observed during the STS-76 Space Shuttle mission. The findings from this observational study highlight the importance of prior knowledge in the updates and demonstrate how missing updates can leave flight controllers vulnerable to being unprepared. Implications for mitigating risk in the transition to 'on-call' architectures are discussed.

Shift changes, updates, and the on-call architecture in space shuttle mission control

NASA Technical Reports Server (NTRS)

Patterson, E. S.; Woods, D. D.

2001-01-01

In domains such as nuclear power, industrial process control, and space shuttle mission control, there is increased interest in reducing personnel during nominal operations. An essential element in maintaining safe operations in high risk environments with this 'on-call' organizational architecture is to understand how to bring called-in practitioners up to speed quickly during escalating situations. Targeted field observations were conducted to investigate what it means to update a supervisory controller on the status of a continuous, anomaly-driven process in a complex, distributed environment. Sixteen shift changes, or handovers, at the NASA Johnson Space Center were observed during the STS-76 Space Shuttle mission. The findings from this observational study highlight the importance of prior knowledge in the updates and demonstrate how missing updates can leave flight controllers vulnerable to being unprepared. Implications for mitigating risk in the transition to 'on-call' architectures are discussed.

Intelligent system of coordination and control for manufacturing

NASA Astrophysics Data System (ADS)

Ciortea, E. M.

2016-08-01

This paper wants shaping an intelligent system monitoring and control, which leads to optimizing material and information flows of the company. The paper presents a model for tracking and control system using intelligent real. Production system proposed for simulation analysis provides the ability to track and control the process in real time. Using simulation models be understood: the influence of changes in system structure, commands influence on the general condition of the manufacturing process conditions influence the behavior of some system parameters. Practical character consists of tracking and real-time control of the technological process. It is based on modular systems analyzed using mathematical models, graphic-analytical sizing, configuration, optimization and simulation.

An integration time adaptive control method for atmospheric composition detection of occultation

NASA Astrophysics Data System (ADS)

Ding, Lin; Hou, Shuai; Yu, Fei; Liu, Cheng; Li, Chao; Zhe, Lin

2018-01-01

When sun is used as the light source for atmospheric composition detection, it is necessary to image sun for accurate identification and stable tracking. In the course of 180 second of the occultation, the magnitude of sun light intensity through the atmosphere changes greatly. It is nearly 1100 times illumination change between the maximum atmospheric and the minimum atmospheric. And the process of light change is so severe that 2.9 times per second of light change can be reached. Therefore, it is difficult to control the integration time of sun image camera. In this paper, a novel adaptive integration time control method for occultation is presented. In this method, with the distribution of gray value in the image as the reference variable, and the concepts of speed integral PID control, the integration time adaptive control problem of high frequency imaging. The large dynamic range integration time automatic control in the occultation can be achieved.

Design and Verification of a Digital Controller for a 2-Piece Hemispherical Resonator Gyroscope.

PubMed

Lee, Jungshin; Yun, Sung Wook; Rhim, Jaewook

2016-04-20

A Hemispherical Resonator Gyro (HRG) is the Coriolis Vibratory Gyro (CVG) that measures rotation angle or angular velocity using Coriolis force acting the vibrating mass. A HRG can be used as a rate gyro or integrating gyro without structural modification by simply changing the control scheme. In this paper, differential control algorithms are designed for a 2-piece HRG. To design a precision controller, the electromechanical modelling and signal processing must be pre-performed accurately. Therefore, the equations of motion for the HRG resonator with switched harmonic excitations are derived with the Duhamel Integral method. Electromechanical modeling of the resonator, electric module and charge amplifier is performed by considering the mode shape of a thin hemispherical shell. Further, signal processing and control algorithms are designed. The multi-flexing scheme of sensing, driving cycles and x, y-axis switching cycles is appropriate for high precision and low maneuverability systems. The differential control scheme is easily capable of rejecting the common mode errors of x, y-axis signals and changing the rate integrating mode on basis of these studies. In the rate gyro mode the controller is composed of Phase-Locked Loop (PLL), amplitude, quadrature and rate control loop. All controllers are designed on basis of a digital PI controller. The signal processing and control algorithms are verified through Matlab/Simulink simulations. Finally, a FPGA and DSP board with these algorithms is verified through experiments.

An Internal Data Non-hiding Type Real-time Kernel and its Application to the Mechatronics Controller

NASA Astrophysics Data System (ADS)

Yoshida, Toshio

For the mechatronics equipment controller that controls robots and machine tools, high-speed motion control processing is essential. The software system of the controller like other embedded systems is composed of three layers software such as real-time kernel layer, middleware layer, and application software layer on the dedicated hardware. The application layer in the top layer is composed of many numbers of tasks, and application function of the system is realized by the cooperation between these tasks. In this paper we propose an internal data non-hiding type real-time kernel in which customizing the task control is possible only by change in the program code of the task side without any changes in the program code of real-time kernel. It is necessary to reduce the overhead caused by the real-time kernel task control for the speed-up of the motion control of the mechatronics equipment. For this, customizing the task control function is needed. We developed internal data non-cryptic type real-time kernel ZRK to evaluate this method, and applied to the control of the multi system automatic lathe. The effect of the speed-up of the task cooperation processing was able to be confirmed by combined task control processing on the task side program code using an internal data non-hiding type real-time kernel ZRK.

Higher-order cognitive training effects on processing speed-related neural activity: a randomized trial.

PubMed

Motes, Michael A; Yezhuvath, Uma S; Aslan, Sina; Spence, Jeffrey S; Rypma, Bart; Chapman, Sandra B

2018-02-01

Higher-order cognitive training has shown to enhance performance in older adults, but the neural mechanisms underlying performance enhancement have yet to be fully disambiguated. This randomized trial examined changes in processing speed and processing speed-related neural activity in older participants (57-71 years of age) who underwent cognitive training (CT, N = 12) compared with wait-listed (WLC, N = 15) or exercise-training active (AC, N = 14) controls. The cognitive training taught cognitive control functions of strategic attention, integrative reasoning, and innovation over 12 weeks. All 3 groups worked through a functional magnetic resonance imaging processing speed task during 3 sessions (baseline, mid-training, and post-training). Although all groups showed faster reaction times (RTs) across sessions, the CT group showed a significant increase, and the WLC and AC groups showed significant decreases across sessions in the association between RT and BOLD signal change within the left prefrontal cortex (PFC). Thus, cognitive training led to a change in processing speed-related neural activity where faster processing speed was associated with reduced PFC activation, fitting previously identified neural efficiency profiles. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Nonlinear Markov Control Processes and Games

DTIC Science & Technology

2012-11-15

the analysis of a new class of stochastic games , nonlinear Markov games , as they arise as a ( competitive ) controlled version of nonlinear Markov... competitive interests) a nonlinear Markov game that we are investigating. I 0. :::tUt::JJt:.l.. I I t:t11VI;:, nonlinear Markov game , nonlinear Markov...corresponding stochastic game Γ+(T, h). In a slightly different setting one can assume that changes in a competitive control process occur as a

Discontinuous Patterns of Brain Activation in the Psychotherapy Process of Obsessive-Compulsive Disorder: Converging Results from Repeated fMRI and Daily Self-Reports

PubMed Central

Schiepek, Günter; Tominschek, Igor; Heinzel, Stephan; Aigner, Martin; Dold, Markus; Unger, Annemarie; Lenz, Gerhard; Windischberger, Christian; Moser, Ewald; Plöderl, Martin; Lutz, Jürgen; Meindl, Thomas; Zaudig, Michael; Pogarell, Oliver; Karch, Susanne

2013-01-01

This study investigates neuronal activation patterns during the psychotherapeutic process, assuming that change dynamics undergo critical instabilities and discontinuous transitions. An internet-based system was used to collect daily self-assessments during inpatient therapies. A dynamic complexity measure was applied to the resulting time series. Critical phases of the change process were indicated by the maxima of the varying complexity. Repeated functional magnetic resonance imaging (fMRI) measurements were conducted over the course of the therapy. The study was realized with 9 patients suffering from obsessive-compulsive disorder (subtype: washing/contamination fear) and 9 matched healthy controls. For symptom-provocative stimulation individualized pictures from patients’ personal environments were used. The neuronal responses to these disease-specific pictures were compared to the responses during standardized disgust-provoking and neutral pictures. Considerably larger neuronal changes in therapy-relevant brain areas (cingulate cortex/supplementary motor cortex, bilateral dorsolateral prefrontal cortex, bilateral insula, bilateral parietal cortex, cuneus) were observed during critical phases (order transitions), as compared to non-critical phases, and also compared to healthy controls. The data indicate that non-stationary changes play a crucial role in the psychotherapeutic process supporting self-organization and complexity models of therapeutic change. PMID:23977168

Levels of integration in cognitive control and sequence processing in the prefrontal cortex.

PubMed

Bahlmann, Jörg; Korb, Franziska M; Gratton, Caterina; Friederici, Angela D

2012-01-01

Cognitive control is necessary to flexibly act in changing environments. Sequence processing is needed in language comprehension to build the syntactic structure in sentences. Functional imaging studies suggest that sequence processing engages the left ventrolateral prefrontal cortex (PFC). In contrast, cognitive control processes additionally recruit bilateral rostral lateral PFC regions. The present study aimed to investigate these two types of processes in one experimental paradigm. Sequence processing was manipulated using two different sequencing rules varying in complexity. Cognitive control was varied with different cue-sets that determined the choice of a sequencing rule. Univariate analyses revealed distinct PFC regions for the two types of processing (i.e. sequence processing: left ventrolateral PFC and cognitive control processing: bilateral dorsolateral and rostral PFC). Moreover, in a common brain network (including left lateral PFC and intraparietal sulcus) no interaction between sequence and cognitive control processing was observed. In contrast, a multivariate pattern analysis revealed an interaction of sequence and cognitive control processing, such that voxels in left lateral PFC and parietal cortex showed different tuning functions for tasks involving different sequencing and cognitive control demands. These results suggest that the difference between the process of rule selection (i.e. cognitive control) and the process of rule-based sequencing (i.e. sequence processing) find their neuronal underpinnings in distinct activation patterns in lateral PFC. Moreover, the combination of rule selection and rule sequencing can shape the response of neurons in lateral PFC and parietal cortex.

Levels of Integration in Cognitive Control and Sequence Processing in the Prefrontal Cortex

PubMed Central

Bahlmann, Jörg; Korb, Franziska M.; Gratton, Caterina; Friederici, Angela D.

2012-01-01

Cognitive control is necessary to flexibly act in changing environments. Sequence processing is needed in language comprehension to build the syntactic structure in sentences. Functional imaging studies suggest that sequence processing engages the left ventrolateral prefrontal cortex (PFC). In contrast, cognitive control processes additionally recruit bilateral rostral lateral PFC regions. The present study aimed to investigate these two types of processes in one experimental paradigm. Sequence processing was manipulated using two different sequencing rules varying in complexity. Cognitive control was varied with different cue-sets that determined the choice of a sequencing rule. Univariate analyses revealed distinct PFC regions for the two types of processing (i.e. sequence processing: left ventrolateral PFC and cognitive control processing: bilateral dorsolateral and rostral PFC). Moreover, in a common brain network (including left lateral PFC and intraparietal sulcus) no interaction between sequence and cognitive control processing was observed. In contrast, a multivariate pattern analysis revealed an interaction of sequence and cognitive control processing, such that voxels in left lateral PFC and parietal cortex showed different tuning functions for tasks involving different sequencing and cognitive control demands. These results suggest that the difference between the process of rule selection (i.e. cognitive control) and the process of rule-based sequencing (i.e. sequence processing) find their neuronal underpinnings in distinct activation patterns in lateral PFC. Moreover, the combination of rule selection and rule sequencing can shape the response of neurons in lateral PFC and parietal cortex. PMID:22952762

Self-organization in psychotherapy: testing the synergetic model of change processes

PubMed Central

Schiepek, Günter K.; Tominschek, Igor; Heinzel, Stephan

2014-01-01

In recent years, models have been developed that conceive psychotherapy as a self-organizing process of bio-psycho-social systems. These models originate from the theory of self-organization (Synergetics), from the theory of deterministic chaos, or from the approach of self-organized criticality. This process-outcome study examines several hypotheses mainly derived from Synergetics, including the assumption of discontinuous changes in psychotherapy (instead of linear incremental gains), the occurrence of critical instabilities in temporal proximity of pattern transitions, the hypothesis of necessary stable boundary conditions during destabilization processes, and of motivation to change playing the role of a control parameter for psychotherapeutic self-organization. Our study was realized at a day treatment center; 23 patients with obsessive compulsive disorder (OCD) were included. Client self-assessment was performed by an Internet-based process monitoring (referred to as the Synergetic Navigation System), whereby daily ratings were recorded through administering the Therapy Process Questionnaire (TPQ). The process measures of the study were extracted from the subscale dynamics (including the dynamic complexity of their time series) of the TPQ. The outcome criterion was measured by the Yale-Brown Obsessive Compulsive Scale (Y-BOCS) which was completed pre-post and on a bi-weekly schedule by all patients. A second outcome criterion was based on the symptom severity subscale of the TPQ. Results supported the hypothesis of discontinuous changes (pattern transitions), the occurrence of critical instabilities preparing pattern transitions, and of stable boundary conditions as prerequisites for such transitions, but not the assumption of motivation to change as a control parameter. PMID:25324801

Self-organization in psychotherapy: testing the synergetic model of change processes.

PubMed

Schiepek, Günter K; Tominschek, Igor; Heinzel, Stephan

2014-01-01

In recent years, models have been developed that conceive psychotherapy as a self-organizing process of bio-psycho-social systems. These models originate from the theory of self-organization (Synergetics), from the theory of deterministic chaos, or from the approach of self-organized criticality. This process-outcome study examines several hypotheses mainly derived from Synergetics, including the assumption of discontinuous changes in psychotherapy (instead of linear incremental gains), the occurrence of critical instabilities in temporal proximity of pattern transitions, the hypothesis of necessary stable boundary conditions during destabilization processes, and of motivation to change playing the role of a control parameter for psychotherapeutic self-organization. Our study was realized at a day treatment center; 23 patients with obsessive compulsive disorder (OCD) were included. Client self-assessment was performed by an Internet-based process monitoring (referred to as the Synergetic Navigation System), whereby daily ratings were recorded through administering the Therapy Process Questionnaire (TPQ). The process measures of the study were extracted from the subscale dynamics (including the dynamic complexity of their time series) of the TPQ. The outcome criterion was measured by the Yale-Brown Obsessive Compulsive Scale (Y-BOCS) which was completed pre-post and on a bi-weekly schedule by all patients. A second outcome criterion was based on the symptom severity subscale of the TPQ. Results supported the hypothesis of discontinuous changes (pattern transitions), the occurrence of critical instabilities preparing pattern transitions, and of stable boundary conditions as prerequisites for such transitions, but not the assumption of motivation to change as a control parameter.

Searching for the self: an identity control theory approach to triggers of occupational exploration.

PubMed

Anderson, Katherine L; Mounts, Nina S

2012-01-01

Identity control theory researchers have found evidence for two processes of identity development (identity defense and identity change) and have theorized a third process (identity exploration). College students (N = 123) self-rated as high or low in occupational identity certainty and importance received self-discrepant feedback to induce identity disturbance, and dependent measures of identity defense, identity change, and identity exploration were obtained. As predicted, high certainty about identity standards led to identity defense, while low certainty led to identity change. Although an interaction between certainty and importance was hypothesized to predict identity exploration, results showed that the two operated independently. Low certainty predicted exploration of additional occupational areas, whereas high importance predicted exploration of self, environment, and additional occupational areas.

Face processing in Williams syndrome is already atypical in infancy.

PubMed

D'Souza, Dean; Cole, Victoria; Farran, Emily K; Brown, Janice H; Humphreys, Kate; Howard, John; Rodic, Maja; Dekker, Tessa M; D'Souza, Hana; Karmiloff-Smith, Annette

2015-01-01

Face processing is a crucial socio-cognitive ability. Is it acquired progressively or does it constitute an innately-specified, face-processing module? The latter would be supported if some individuals with seriously impaired intelligence nonetheless showed intact face-processing abilities. Some theorists claim that Williams syndrome (WS) provides such evidence since, despite IQs in the 50s, adolescents/adults with WS score in the normal range on standardized face-processing tests. Others argue that atypical neural and cognitive processes underlie WS face-processing proficiencies. But what about infants with WS? Do they start with typical face-processing abilities, with atypicality developing later, or are atypicalities already evident in infancy? We used an infant familiarization/novelty design and compared infants with WS to typically developing controls as well as to a group of infants with Down syndrome matched on both mental and chronological age. Participants were familiarized with a schematic face, after which they saw a novel face in which either the features (eye shape) were changed or just the configuration of the original features. Configural changes were processed successfully by controls, but not by infants with WS who were only sensitive to featural changes and who showed syndrome-specific profiles different from infants with the other neurodevelopmental disorder. Our findings indicate that theorists can no longer use the case of WS to support claims that evolution has endowed the human brain with an independent face-processing module.

Rural Renaissance--A Perspective and a Process.

ERIC Educational Resources Information Center

Axinn, George H.

If the path to a better rural life is to be a change preferred by the rural people involved, recent world experience would suggest that it must be a change born from within the given rural social system, be controlled by its beneficiaries, and be integrated into the larger system of which it is a part. Such a perspective and such a process might…

Learning Control: Sense-Making, CNC Machines, and Changes in Vocational Training for Industrial Work

ERIC Educational Resources Information Center

Berner, Boel

2009-01-01

The paper explores how novices in school-based vocational training make sense of computerized numerical control (CNC) machines. Based on two ethnographic studies in Swedish schools, one from the early 1980s and one from 2006, it analyses change and continuity in the cognitive, social, and emotional processes of learning how to become a machine…

Evaluation of stable isotope fingerprinting techniques for the assessment of the predominant methanogenic pathways in anaerobic digesters.

PubMed

Nikolausz, M; Walter, R F H; Sträuber, H; Liebetrau, J; Schmidt, T; Kleinsteuber, S; Bratfisch, F; Günther, U; Richnow, H H

2013-03-01

Laboratory biogas reactors were operated under various conditions using maize silage, chicken manure, or distillers grains as substrate. In addition to the standard process parameters, the hydrogen and carbon stable isotopic composition of biogas was analyzed to estimate the predominant methanogenic pathways as a potential process control tool. The isotopic fingerprinting technique was evaluated by parallel analysis of mcrA genes and their transcripts to study the diversity and activity of methanogens. The dominant hydrogenotrophs were Methanomicrobiales, while aceticlastic methanogens were represented by Methanosaeta and Methanosarcina at low and high organic loading rates, respectively. Major changes in the relative abundance of mcrA transcripts were observed compared to the results obtained from DNA level. In agreement with the molecular results, the isotope data suggested the predominance of the hydrogenotrophic pathway in one reactor fed with chicken manure, while both pathways were important in the other reactors. Short-term changes in the isotopic composition were followed, and a significant change in isotope values was observed after feeding a reactor digesting maize silage. This ability of stable isotope fingerprinting to follow short-term activity changes shows potential for indicating process failures and makes it a promising technology for process control.

Mass spectrometric profiling of lipids in intestinal tissue from rats fed cereals processed for medical conditions.

PubMed

Dowlatshahi Pour, Masoumeh; Jennische, Eva; Lange, Stefan; Ewing, Andrew G; Malmberg, Per

2016-06-11

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used for lipid profiling of intestine tissue sections from rats fed specially processed cereals and rats fed ordinary feed as a control. This cereal is known to increase the activity of antisecretory factor in plasma and the exact mechanism for the activation process at the cellular level is unclear. ToF-SIMS has been used to track food induced changes in lipid content in intestinal tissue sections to gain insight into the possible mechanisms involved. Data from 20 intestine sections belonging to four different rats from each group of control and specially processed cereals-fed rats were obtained using the stage scan macroraster with a lateral resolution of 5 μm. Data were subsequently subjected to orthogonal partial least squares discriminant analysis. The data clearly show that changes of certain lipids are induced by the specially processed cereal feed. Scores plots show a well-defined separation between the two groups. The corresponding loading plots reveal that the groups separate mainly due to changes of vitamin E, phosphocholine, and phosphosphingolipid fragments, and that for the c18:2 fatty acid. The observed changes in lipids might give insight into the working mechanisms of antisecretory factor in the body, and this has been successfully used to understand the working mechanism of specially processed cereal-induced antisecretory factor activation in intestine.

Automatic Control of the Concrete Mixture Homogeneity in Cycling Mixers

NASA Astrophysics Data System (ADS)

Anatoly Fedorovich, Tikhonov; Drozdov, Anatoly

2018-03-01

The article describes the factors affecting the concrete mixture quality related to the moisture content of aggregates, since the effectiveness of the concrete mixture production is largely determined by the availability of quality management tools at all stages of the technological process. It is established that the unaccounted moisture of aggregates adversely affects the concrete mixture homogeneity and, accordingly, the strength of building structures. A new control method and the automatic control system of the concrete mixture homogeneity in the technological process of mixing components have been proposed, since the tasks of providing a concrete mixture are performed by the automatic control system of processing kneading-and-mixing machinery with operational automatic control of homogeneity. Theoretical underpinnings of the control of the mixture homogeneity are presented, which are related to a change in the frequency of vibrodynamic vibrations of the mixer body. The structure of the technical means of the automatic control system for regulating the supply of water is determined depending on the change in the concrete mixture homogeneity during the continuous mixing of components. The following technical means for establishing automatic control have been chosen: vibro-acoustic sensors, remote terminal units, electropneumatic control actuators, etc. To identify the quality indicator of automatic control, the system offers a structure flowchart with transfer functions that determine the ACS operation in transient dynamic mode.

Adaptive change in corporate control practices.

PubMed

Alexander, J A

1991-03-01

Multidivisional organizations are not concerned with what structure to adopt but with how they should exercise control within the divisional form to achieve economic efficiencies. Using an information-processing framework, I examined control arrangements between the headquarters and operating divisions of such organizations and how managers adapted control practices to accommodate increasing environmental uncertainty. Also considered were the moderating effects of contextual attributes on such adaptive behavior. Analyses of panel data from 97 multihospital systems suggested that organizations generally practice selective decentralization under conditions of increasing uncertainty but that organizational age, dispersion, and initial control arrangements significantly moderate the direction and magnitude of such changes.

Analysis of extreme rainfall events using attributes control charts in temporal rainfall processes

NASA Astrophysics Data System (ADS)

Villeta, María; Valencia, Jose Luis; Saá-Requejo, Antonio; María Tarquis, Ana

2015-04-01

The impacts of most intense rainfall events on agriculture and insurance industry can be very severe. This research focuses in the analysis of extreme rainfall events throughout the use of attributes control charts, which constitutes a usual tool in Statistical Process Control (SPC) but unusual in climate studios. Here, series of daily precipitations for the years 1931-2009 within a Spanish region are analyzed, based on a new type of attributes control chart that takes into account the autocorrelation between the extreme rainfall events. The aim is to conclude if there exist or not evidence of a change in the extreme rainfall model of the considered series. After adjusting seasonally the precipitation series and considering the data of the first 30 years, a frequency-based criterion allowed fixing specification limits in order to discriminate between extreme observed rainfall days and normal observed rainfall days. The autocorrelation amongst maximum precipitation is taken into account by a New Binomial Markov Extended Process obtained for each rainfall series. These modelling of the extreme rainfall processes provide a way to generate the attributes control charts for the annual fraction of rainfall extreme days. The extreme rainfall processes along the rest of the years under study can then be monitored by such attributes control charts. The results of the application of this methodology show evidence of change in the model of extreme rainfall events in some of the analyzed precipitation series. This suggests that the attributes control charts proposed for the analysis of the most intense precipitation events will be of practical interest to agriculture and insurance sectors in next future.

Use of edible coatings to preserve quality of lightly (and slightly) processed products.

PubMed

Baldwin, E A; Nisperos-Carriedo, M O; Baker, R A

1995-11-01

Lightly processed agricultural products present a special problem to the food industry and to scientists involved in postharvest and food technology research. Light or minimal processing includes cutting, slicing, coring, peeling, trimming, or sectioning of agricultural produce. These products have an active metabolism that can result in deteriorative changes, such as increased respiration and ethylene production. If not controlled, these changes can lead to rapid senescence and general deterioration of the product. In addition, the surface water activity of cut fruits and vegetables is generally quite high, inviting microbial attack, which further reduces product stability. Methods for control of these changes are numerous and can include the use of edible coatings. Also mentioned in this review are coating of nut products, and dried, dehydrated, and freeze-dried fruits. Technically, these are not considered to be minimally processed, but many of the problems and benefits of coating these products are similar to coating lightly processed products. Generally, the potential benefits of edible coatings for processed or lightly processed produce is to stabilize the product and thereby extend product shelf life. More specifically, coatings have the potential to reduce moisture loss, restrict oxygen entrance, lower respiration, retard ethylene production, seal in flavor volatiles, and carry additives that retard discoloration and microbial growth.

School Systems' Practices of Controlling Socialization during Principal Succession: Looking through the Lens of an Organizational Socialization Theory

ERIC Educational Resources Information Center

Bengtson, Ed; Zepeda, Sally J.; Parylo, Oksana

2013-01-01

The importance of effective school leadership is well known. The inevitable changing of school leaders raises concerns over the successfulness of the succession process. Directly linked to leader succession is socialization; therefore, the purpose of this study was to examine the processes and practices of school systems that control the…

Advanced multivariable control of a turboexpander plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Altena, D.; Howard, M.; Bullin, K.

1998-12-31

This paper describes an application of advanced multivariable control on a natural gas plant and compares its performance to the previous conventional feed-back control. This control algorithm utilizes simple models from existing plant data and/or plant tests to hold the process at the desired operating point in the presence of disturbances and changes in operating conditions. The control software is able to accomplish this due to effective handling of process variable interaction, constraint avoidance and feed-forward of measured disturbances. The economic benefit of improved control lies in operating closer to the process constraints while avoiding significant violations. The South Texasmore » facility where this controller was implemented experienced reduced variability in process conditions which increased liquids recovery because the plant was able to operate much closer to the customer specified impurity constraint. An additional benefit of this implementation of multivariable control is the ability to set performance criteria beyond simple setpoints, including process variable constraints, relative variable merit and optimizing use of manipulated variables. The paper also details the control scheme applied to the complex turboexpander process and some of the safety features included to improve reliability.« less

The use of visual cues for vehicle control and navigation

NASA Technical Reports Server (NTRS)

Hart, Sandra G.; Battiste, Vernol

1991-01-01

At least three levels of control are required to operate most vehicles: (1) inner-loop control to counteract the momentary effects of disturbances on vehicle position; (2) intermittent maneuvers to avoid obstacles, and (3) outer-loop control to maintain a planned route. Operators monitor dynamic optical relationships in their immediate surroundings to estimate momentary changes in forward, lateral, and vertical position, rates of change in speed and direction of motion, and distance from obstacles. The process of searching the external scene to find landmarks (for navigation) is intermittent and deliberate, while monitoring and responding to subtle changes in the visual scene (for vehicle control) is relatively continuous and 'automatic'. However, since operators may perform both tasks simultaneously, the dynamic optical cues available for a vehicle control task may be determined by the operator's direction of gaze for wayfinding. An attempt to relate the visual processes involved in vehicle control and wayfinding is presented. The frames of reference and information used by different operators (e.g., automobile drivers, airline pilots, and helicopter pilots) are reviewed with particular emphasis on the special problems encountered by helicopter pilots flying nap of the earth (NOE). The goal of this overview is to describe the context within which different vehicle control tasks are performed and to suggest ways in which the use of visual cues for geographical orientation might influence visually guided control activities.

Relational Processing Following Stroke

ERIC Educational Resources Information Center

Andrews, Glenda; Halford, Graeme S.; Shum, David; Maujean, Annick; Chappell, Mark; Birney, Damian

2013-01-01

The research examined relational processing following stroke. Stroke patients (14 with frontal, 30 with non-frontal lesions) and 41 matched controls completed four relational processing tasks: sentence comprehension, Latin square matrix completion, modified Dimensional Change Card Sorting, and n-back. Each task included items at two or three…

Formation mechanism of a silicon carbide coating for a reinforced carbon-carbon composite

NASA Technical Reports Server (NTRS)

Rogers, D. C.; Shuford, D. M.; Mueller, J. I.

1975-01-01

Results are presented for a study to determine the mechanisms involved in a high-temperature pack cementation process which provides a silicon carbide coating on a carbon-carbon composite. The process and materials used are physically and chemically analyzed. Possible reactions are evaluated using the results of these analytical data. The coating is believed to develop in two stages. The first is a liquid controlled phase process in which silicon carbide is formed due to reactions between molten silicon metal and the carbon. The second stage is a vapor transport controlled reaction in which silicon vapors react with the carbon. There is very little volume change associated with the coating process. The original thickness changes by less than 0.7%. This indicates that the coating process is one of reactive penetration. The coating thickness can be increased or decreased by varying the furnace cycle process time and/or temperature to provide a wide range of coating thicknesses.

Computational fluid dynamics modelling of hydraulics and sedimentation in process reactors during aeration tank settling.

PubMed

Jensen, M D; Ingildsen, P; Rasmussen, M R; Laursen, J

2006-01-01

Aeration tank settling is a control method allowing settling in the process tank during high hydraulic load. The control method is patented. Aeration tank settling has been applied in several waste water treatment plants using the present design of the process tanks. Some process tank designs have shown to be more effective than others. To improve the design of less effective plants, computational fluid dynamics (CFD) modelling of hydraulics and sedimentation has been applied. This paper discusses the results at one particular plant experiencing problems with partly short-circuiting of the inlet and outlet causing a disruption of the sludge blanket at the outlet and thereby reducing the retention of sludge in the process tank. The model has allowed us to establish a clear picture of the problems arising at the plant during aeration tank settling. Secondly, several process tank design changes have been suggested and tested by means of computational fluid dynamics modelling. The most promising design changes have been found and reported.

Using behavioural activation in the treatment of depression: a control theory perspective.

PubMed

McEvoy, P; Law, A; Bates, R; Hylton, K; Mansell, W

2013-12-01

Behavioural activation is an intervention that can be used to counteract the typical patterns of withdrawal, avoidance and inactivity that characterize depression. This paper examines the processes of change that may occur during behavioural activation from the perspective of control theory. Some of the key concepts that are associated with control theory are introduced and the process of change that may occur during behavioural activation is illustrated using two case studies. The case studies provide anecdotal evidence which supports the hypothesis that the effective implementation of behavioural activation may depend upon clients being able to retain or regain the sense of control that they value. The differences between a control-theory-based approach and more orthodox behavioural and cognitive approaches are highlighted and the implications of these differences are discussed. Flexible approaches that are informed by control theory, may offer a useful alternative to the more established behavioural and cognitive approaches towards behavioural activation. © 2012 John Wiley & Sons Ltd.

Processes contributing to resilience of coastal wetlands to sea-level rise

USGS Publications Warehouse

Stagg, Camille L.; Krauss, Ken W.; Cahoon, Donald R.; Cormier, Nicole; Conner, William H.; Swarzenski, Christopher M.

2016-01-01

The objectives of this study were to identify processes that contribute to resilience of coastal wetlands subject to rising sea levels and to determine whether the relative contribution of these processes varies across different wetland community types. We assessed the resilience of wetlands to sea-level rise along a transitional gradient from tidal freshwater forested wetland (TFFW) to marsh by measuring processes controlling wetland elevation. We found that, over 5 years of measurement, TFFWs were resilient, although some marginally, and oligohaline marshes exhibited robust resilience to sea-level rise. We identified fundamental differences in how resilience is maintained across wetland community types, which have important implications for management activities that aim to restore or conserve resilient systems. We showed that the relative importance of surface and subsurface processes in controlling wetland surface elevation change differed between TFFWs and oligohaline marshes. The marshes had significantly higher rates of surface accretion than the TFFWs, and in the marshes, surface accretion was the primary contributor to elevation change. In contrast, elevation change in TFFWs was more heavily influenced by subsurface processes, such as root zone expansion or compaction, which played an important role in determining resilience of TFFWs to rising sea level. When root zone contributions were removed statistically from comparisons between relative sea-level rise and surface elevation change, sites that previously had elevation rate deficits showed a surplus. Therefore, assessments of wetland resilience that do not include subsurface processes will likely misjudge vulnerability to sea-level rise.

Final Technical Report - Advanced Optical Sensors to Minimize Energy Consumption in Polymer Extrusion Processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Susan J. Foulk

Project Objective: The objectives of this study are to develop an accurate and stable on-line sensor system to monitor color and composition on-line in polymer melts, to develop a scheme for using the output to control extruders to eliminate the energy, material and operational costs of off-specification product, and to combine or eliminate some extrusion processes. Background: Polymer extrusion processes are difficult to control because the quality achieved in the final product is complexly affected by the properties of the extruder screw, speed of extrusion, temperature, polymer composition, strength and dispersion properties of additives, and feeder system properties. Extruder systemsmore » are engineered to be highly reproducible so that when the correct settings to produce a particular product are found, that product can be reliably produced time after time. However market conditions often require changes in the final product, different products or grades may be processed in the same equipment, and feed materials vary from lot to lot. All of these changes require empirical adjustment of extruder settings to produce a product meeting specifications. Optical sensor systems that can continuously monitor the composition and color of the extruded polymer could detect process upsets, drift, blending oscillations, and changes in dispersion of additives. Development of an effective control algorithm using the output of the monitor would enable rapid corrections for changes in materials and operating conditions, thereby eliminating most of the scrap and recycle of current processing. This information could be used to identify extruder systems issues, diagnose problem sources, and suggest corrective actions in real-time to help keep extruder system settings within the optimum control region. Using these advanced optical sensor systems would give extruder operators real-time feedback from their process. They could reduce the amount of off-spec product produced and significantly reduce energy consumption. Also, because blending and dispersion of additives and components in the final product could be continuously verified, we believe that, in many cases, intermediate compounding steps could be eliminated (saving even more time and energy).« less

Interactive color display for multispectral imagery using correlation clustering

NASA Technical Reports Server (NTRS)

Haskell, R. E. (Inventor)

1979-01-01

A method for processing multispectral data is provided, which permits an operator to make parameter level changes during the processing of the data. The system is directed to production of a color classification map on a video display in which a given color represents a localized region in multispectral feature space. Interactive controls permit an operator to alter the size and change the location of these regions, permitting the classification of such region to be changed from a broad to a narrow classification.

A Numerical Optimization Approach for Tuning Fuzzy Logic Controllers

NASA Technical Reports Server (NTRS)

Woodard, Stanley E.; Garg, Devendra P.

1998-01-01

This paper develops a method to tune fuzzy controllers using numerical optimization. The main attribute of this approach is that it allows fuzzy logic controllers to be tuned to achieve global performance requirements. Furthermore, this approach allows design constraints to be implemented during the tuning process. The method tunes the controller by parameterizing the membership functions for error, change-in-error and control output. The resulting parameters form a design vector which is iteratively changed to minimize an objective function. The minimal objective function results in an optimal performance of the system. A spacecraft mounted science instrument line-of-sight pointing control is used to demonstrate results.

Rumination, event centrality, and perceived control as predictors of post-traumatic growth and distress: The Cognitive Growth and Stress model.

PubMed

Brooks, Matthew; Graham-Kevan, Nicola; Lowe, Michelle; Robinson, Sarita

2017-09-01

The Cognitive Growth and Stress (CGAS) model draws together cognitive processing factors previously untested into a single model. Intrusive rumination, deliberate rumination, present and future perceptions of control, and event centrality were assessed as predictors of post-traumatic growth (PTG) and post-traumatic stress (PTS). The CGAS model is tested on a sample of survivors (N = 250) of a diverse range of adverse events using structural equation modelling techniques. Overall, the best fitting model was supportive of the theorized relations between cognitive constructs and accounted for 30% of the variance in PTG and 68% of the variance in PTS across the sample. Rumination, centrality, and perceived control factors are significant determinants of positive and negative psychological change across the wide spectrum of adversarial events. In its first phase of development, the CGAS model also provides further evidence of the distinct processes of growth and distress following adversity. Clinical implications People can experience positive change after adversity, regardless of life background or types of events experienced. While growth and distress are possible outcomes after adversity, they occur through distinct processes. Support or intervention should consider rumination, event centrality, and perceived control factors to enhance psychological well-being. Cautions/limitations Longitudinal research would further clarify the findings found in this study. Further extension of the model is recommended to include other viable cognitive processes implicated in the development of positive and negative changes after adversity. © 2017 The British Psychological Society.

Speed Isn't Everything: Complex Processing Speed Measures Mask Individual Differences and Developmental Changes in Executive Control

ERIC Educational Resources Information Center

Cepeda, Nicholas J.; Blackwell, Katharine A.; Munakata, Yuko

2013-01-01

The rate at which people process information appears to influence many aspects of cognition across the lifespan. However, many commonly accepted measures of "processing speed" may require goal maintenance, manipulation of information in working memory, and decision-making, blurring the distinction between processing speed and executive…

A case study in the use of evidence in a changing political context: an Aboriginal and Torres Strait Islander health service re-examines practice models, governance and financing.

PubMed

Gajjar, Deepa; Zwi, Anthony B; Hill, Peter S; Shannon, Cindy

2014-09-01

This paper examines the response of a regional body, the Institute for Urban Indigenous Health (IUIH), coordinating Aboriginal community controlled health organisations (ACCHOs) in south-east Queensland, to research evidence as they prioritise and plan services in response to internal economic and organisational factors, as well as external policy change. An event-based analysis of a quarterly management meeting of the IUIH allowed an exploration of how the IUIH uses a range of evidence to respond to the challenges faced within the Aboriginal community controlled health sector. The study identified three distinct but interconnected processes: (1) identifying evidence for change; (2) exploring and reframing this evidence; and (3) the application of this evidence at different levels of policy and practice. These processes were evident in each of the three major agendas addressed during the meeting, namely navigating current political change, reforming the ACCHO business model and reframing the available evidence for advocacy. The result has been the emergence of a new service delivery model, in which evidence supports accountability, change management, self-sufficiency and attempts to redefine community control.

Command and Control in a Complex World

DTIC Science & Technology

2012-05-22

definition of command and control does not adequately address changes introduced through technology trends, our understanding of the global operating...processes. The current joint definition of command and control does not adequately address changes introduced through technology trends, our...the problem is actually solved.  There are no  definitive ,  objective solutions to wicked problems.  For a complete  definition  of wicked problems, see

Closed loop control of the induction heating process using miniature magnetic sensors

DOEpatents

Bentley, Anthony E.; Kelley, John Bruce; Zutavern, Fred J.

2003-05-20

A method and system for providing real-time, closed-loop control of the induction hardening process. A miniature magnetic sensor located near the outer surface of the workpiece measures changes in the surface magnetic field caused by changes in the magnetic properties of the workpiece as it heats up during induction heating (or cools down during quenching). A passive miniature magnetic sensor detects a distinct magnetic spike that appears when the saturation field, B.sub.sat, of the workpiece has been exceeded. This distinct magnetic spike disappears when the workpiece's surface temperature exceeds its Curie temperature, due to the sudden decrease in its magnetic permeability. Alternatively, an active magnetic sensor can measure changes in the resonance response of the monitor coil when the excitation coil is linearly swept over 0-10 MHz, due to changes in the magnetic permeability and electrical resistivity of the workpiece as its temperature increases (or decreases).

National malaria vector control policy: an analysis of the decision to scale-up larviciding in Nigeria.

PubMed

Tesfazghi, Kemi; Hill, Jenny; Jones, Caroline; Ranson, Hilary; Worrall, Eve

2016-02-01

New vector control tools are needed to combat insecticide resistance and reduce malaria transmission. The World Health Organization (WHO) endorses larviciding as a supplementary vector control intervention using larvicides recommended by the WHO Pesticides Evaluation Scheme (WHOPES). The decision to scale-up larviciding in Nigeria provided an opportunity to investigate the factors influencing policy adoption and assess the role that actors and evidence play in the policymaking process, in order to draw lessons that help accelerate the uptake of new methods for vector control. A retrospective policy analysis was carried out using in-depth interviews with national level policy stakeholders to establish normative national vector control policy or strategy decision-making processes and compare these with the process that led to the decision to scale-up larviciding. The interviews were transcribed, then coded and analyzed using NVivo10. Data were coded according to pre-defined themes from an analytical policy framework developed a priori. Stakeholders reported that the larviciding decision-making process deviated from the normative vector control decision-making process. National malaria policy is normally strongly influenced by WHO recommendations, but the potential of larviciding to contribute to national economic development objectives through larvicide production in Nigeria was cited as a key factor shaping the decision. The larviciding decision involved a restricted range of policy actors, and notably excluded actors that usually play advisory, consultative and evidence generation roles. Powerful actors limited the access of some actors to the policy processes and content. This may have limited the influence of scientific evidence in this policy decision. This study demonstrates that national vector control policy change can be facilitated by linking malaria control objectives to wider socioeconomic considerations and through engaging powerful policy champions to drive policy change and thereby accelerate access to new vector control tools. © The Author 2015. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

Controlled experiments of hillslope co-evolution at the Biosphere 2 Landscape Evolution Observatory: toward prediction of coupled hydrological, biogeochemical, and ecological change

NASA Astrophysics Data System (ADS)

Volkmann, T. H. M.; Sengupta, A.; Pangle, L.; Abramson, N.; Barron-Gafford, G.; Breshears, D. D.; Bugaj, A.; Chorover, J.; Dontsova, K.; Durcik, M.; Ferre, T. P. A.; Harman, C. J.; Hunt, E.; Huxman, T. E.; Kim, M.; Maier, R. M.; Matos, K.; Alves Meira Neto, A.; Meredith, L. K.; Monson, R. K.; Niu, G. Y.; Pelletier, J. D.; Rasmussen, C.; Ruiz, J.; Saleska, S. R.; Schaap, M. G.; Sibayan, M.; Tuller, M.; Van Haren, J. L. M.; Wang, Y.; Zeng, X.; Troch, P. A.

2017-12-01

Understanding the process interactions and feedbacks among water, microbes, plants, and porous geological media is crucial for improving predictions of the response of Earth's critical zone to future climatic conditions. However, the integrated co-evolution of landscapes under change is notoriously difficult to investigate. Laboratory studies are typically limited in spatial and temporal scale, while field studies lack observational density and control. To bridge the gap between controlled lab and uncontrolled field studies, the University of Arizona - Biosphere 2 built a macrocosm experiment of unprecedented scale: the Landscape Evolution Observatory (LEO). LEO consists of three replicated, 330-m2 hillslope landscapes inside a 5000-m2 environmentally controlled facility. The engineered landscapes contain 1-m depth of basaltic tephra ground to homogenous loamy sand that will undergo physical, chemical, and mineralogical changes over many years. Each landscape contains a dense sensor network capable of resolving water, carbon, and energy cycling processes at sub-meter to whole-landscape scale. Embedded sampling devices allow for quantification of biogeochemical processes, and facilitate the use of chemical tracers applied with the artificial rainfall. LEO is now fully operational and intensive forcing experiments have been launched. While operating the massive infrastructure poses significant challenges, LEO has demonstrated the capacity of tracking multi-scale matter and energy fluxes at a level of detail impossible in field experiments. Initial sensor, sampler, and restricted soil coring data are already providing insights into the tight linkages between water flow, weathering, and (micro-) biological community development during incipient landscape evolution. Over the years to come, these interacting processes are anticipated to drive the model systems to increasingly complex states, potentially perturbed by changes in climatic forcing. By intensively monitoring the evolutionary trajectory, integrating data with models, and fostering community-wide collaborations, we envision that emergent landscape structures and functions can be linked and significant progress can be made toward predicting the coupled hydro-biogeochemical and ecological responses to global change.

A microscopic lane changing process model for multilane traffic

NASA Astrophysics Data System (ADS)

Lv, Wei; Song, Wei-guo; Liu, Xiao-dong; Ma, Jian

2013-03-01

In previous simulations lane-changing behavior is usually assumed as an instantaneous action. However, in real traffic, lane changing is a continuing process which can seriously affect the following cars. In this paper, a microscopic lane-changing process (LCP) model is clearly described. A new idea of simplifying the lane-changing process to the car-following framework is presented by controlling fictitious cars. To verify the model, the results of flow, lane-changing frequency, and single-car velocity are extracted from experimental observations and are compared with corresponding simulation. It is found that the LCP model agrees well with actual traffic flow and lane-changing behaviors may induce a 12%-18% reduction of traffic flow. The results also reflect that most of the drivers on the two roads in a city are conservative but not aggressive to change lanes. Investigation of lane-changing frequency shows that the largest lane-changing frequency occurs at a medium density range from 15 vehs km lane to 35 vehs km lane. It also implies that the lane-changing process might strengthen velocity variation at medium density and weaken velocity variation at high density. It is hoped that the idea of this study may be helpful to promote the modeling and simulation study of traffic flow.

Effect of sous vide processing on physicochemical, ultrastructural, microbial and sensory changes in vacuum packaged chicken sausages.

PubMed

Naveena, B M; Khansole, Panjab S; Shashi Kumar, M; Krishnaiah, N; Kulkarni, Vinayak V; Deepak, S J

2017-01-01

The processing of sous vide chicken sausages was optimized under vacuum packaging condition and cooking at 100 ℃ for 30 min (SV30), 60 min (SV60) and 120 min (SV120) and compared with aerobically cooked control at 100 ℃ for 30 min. Sous vide processing of chicken sausages (SV30) produced higher (p < 0.05) cooking yield, Hunterlab a* values and sensory attributes without affecting proximate composition and shear force values relative to control. The sodium dodecyl sulphate-polyacrylamide gel electrophoresis and scanning electron microscopy results revealed no significant changes in protein quality and emulsion ultra-structure due to SV30 processing relative to control sausages. Sous vide processing of chicken sausages enriched with rosemary diterpene phenols retained the freshness and quality up to 120 days during storage at 4 ± 1 ℃ relative to control sausages that were spoiled on 20th day. Lipid oxidation and microbial growth remained below the spoilage levels for all the SV-processed sausages throughout the storage and addition of rosemary diterpene mixture at 0.02% v/w reduced the microbial growth and improved (p < 0.05) the sensory attributes. Our results demonstrate that sous vide processing minimizes lipid oxidation and microbial growth of chicken sausages with improved product quality and shelf-life at 4 ± 1 ℃. © The Author(s) 2016.

High-throughput miniaturized bioreactors for cell culture process development: reproducibility, scalability, and control.

PubMed

Rameez, Shahid; Mostafa, Sigma S; Miller, Christopher; Shukla, Abhinav A

2014-01-01

Decreasing the timeframe for cell culture process development has been a key goal toward accelerating biopharmaceutical development. Advanced Microscale Bioreactors (ambr™) is an automated micro-bioreactor system with miniature single-use bioreactors with a 10-15 mL working volume controlled by an automated workstation. This system was compared to conventional bioreactor systems in terms of its performance for the production of a monoclonal antibody in a recombinant Chinese Hamster Ovary cell line. The miniaturized bioreactor system was found to produce cell culture profiles that matched across scales to 3 L, 15 L, and 200 L stirred tank bioreactors. The processes used in this article involve complex feed formulations, perturbations, and strict process control within the design space, which are in-line with processes used for commercial scale manufacturing of biopharmaceuticals. Changes to important process parameters in ambr™ resulted in predictable cell growth, viability and titer changes, which were in good agreement to data from the conventional larger scale bioreactors. ambr™ was found to successfully reproduce variations in temperature, dissolved oxygen (DO), and pH conditions similar to the larger bioreactor systems. Additionally, the miniature bioreactors were found to react well to perturbations in pH and DO through adjustments to the Proportional and Integral control loop. The data presented here demonstrates the utility of the ambr™ system as a high throughput system for cell culture process development. © 2014 American Institute of Chemical Engineers.

Banishing the Control Homunculi in Studies of Action Control and Behavior Change

PubMed Central

Verbruggen, Frederick; McLaren, Ian P. L.; Chambers, Christopher D.

2014-01-01

For centuries, human self-control has fascinated scientists and nonscientists alike. Current theories often attribute it to an executive control system. But even though executive control receives a great deal of attention across disciplines, most aspects of it are still poorly understood. Many theories rely on an ill-defined set of “homunculi” doing jobs like “response inhibition” or “updating” without explaining how they do so. Furthermore, it is not always appreciated that control takes place across different timescales. These two issues hamper major advances. Here we focus on the mechanistic basis for the executive control of actions. We propose that at the most basic level, action control depends on three cognitive processes: signal detection, action selection, and action execution. These processes are modulated via error-correction or outcome-evaluation mechanisms, preparation, and task rules maintained in working and long-term memory. We also consider how executive control of actions becomes automatized with practice and how people develop a control network. Finally, we discuss how the application of this unified framework in clinical domains can increase our understanding of control deficits and provide a theoretical basis for the development of novel behavioral change interventions. PMID:25419227

Evaluation of browning ratio in an image analysis of apple slices at different stages of instant controlled pressure drop-assisted hot-air drying (AD-DIC).

PubMed

Gao, Kun; Zhou, Linyan; Bi, Jinfeng; Yi, Jianyong; Wu, Xinye; Zhou, Mo; Wang, Xueyuan; Liu, Xuan

2017-06-01

Computer vision-based image analysis systems are widely used in food processing to evaluate quality changes. They are able to objectively measure the surface colour of various products since, providing some obvious advantages with their objectivity and quantitative capabilities. In this study, a computer vision-based image analysis system was used to investigate the colour changes of apple slices dried by instant controlled pressure drop-assisted hot air drying (AD-DIC). The CIE L* value and polyphenol oxidase activity in apple slices decreased during the entire drying process, whereas other colour indexes, including CIE a*, b*, ΔE and C* values, increased. The browning ratio calculated by image analysis increased during the drying process, and a sharp increment was observed for the DIC process. The change in 5-hydroxymethylfurfural (5-HMF) and fluorescent compounds (FIC) showed the same trend with browning ratio due to Maillard reaction. Moreover, the concentrations of 5-HMF and FIC both had a good quadratic correlation (R 2  > 0.998) with the browning ratio. Browning ratio was a reliable indicator of 5-HMF and FIC changes in apple slices during drying. The image analysis system could be used to monitor colour changes, 5-HMF and FIC in dehydrated apple slices during the AD-DIC process. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Microglia show altered morphology and reduced arborization in human brain during aging and Alzheimer's disease.

PubMed

Davies, Danielle S; Ma, Jolande; Jegathees, Thuvarahan; Goldsbury, Claire

2017-11-01

Changes in microglia function are involved in Alzheimer's disease (AD) for which ageing is the major risk factor. We evaluated microglial cell process morphologies and their gray matter coverage (arborized area) during ageing and in the presence and absence of AD pathology in autopsied human neocortex. Microglial cell processes were reduced in length, showed less branching and reduced arborized area with aging (case range 52-98 years). This occurred during normal ageing and without microglia dystrophy or changes in cell density. There was a larger reduction in process length and arborized area in AD compared to aged-matched control microglia. In AD cases, on average, 49%-64% of microglia had discontinuous and/or punctate Iba1 labeled processes instead of continuous Iba1 distribution. Up to 16% of aged-matched control microglia displayed discontinuous or punctate features. There was no change in the density of microglial cell bodies in gray matter during ageing or AD. This demonstrates that human microglia show progressive cell process retraction without cell loss during ageing. Additional changes in microglia occur with AD including Iba1 protein puncta and discontinuity. We suggest that reduced microglial arborized area may be an aging-related correlate of AD in humans. These variations in microglial cells during ageing and in AD could reflect changes in neural-glial interactions which are emerging as key to mechanisms involved in ageing and neurodegenerative disease. © 2016 International Society of Neuropathology.

Cognitive Processes in Alcohol Binges: A Review and Research Agenda

PubMed Central

Field, Matt; Schoenmakers, Tim; Wiers, Reinout W.

2010-01-01

Alcohol abuse is associated with a cluster of long-term changes in cognitive processes, as predicted by contemporary models of addiction. In this paper we review evidence which suggests that similar changes may occur during an alcohol binge, and as such they may play an important role in explaining the loss of control over alcohol consumption that occurs during alcohol binges. As a consequence of both acute alcohol intoxication (alcohol ‘priming’ effects) and exposure to environmental alcohol-related cues, we suggest that a number of changes in cognitive processes are likely. These include increased subjective craving for alcohol, increased positive and arousing outcome expectancies and implicit associations for alcohol use, increased attentional bias for alcohol-related cues, increased action tendencies to approach alcohol, increased impulsive decision-making, and impaired inhibitory control over drives and behaviour. Potential reciprocal relationships between these different aspects of cognition during an alcohol binge are discussed. Finally, we discuss the relationship between the current model and existing models of cognitive processes in substance abuse, and we speculate on the implications of the model for the reduction binge drinking and its consequences. PMID:19630725

FATE AND EFFECTS OF PHOSPHORUS ADDITIONS IN SOILS UNDER N2-FIXING RED ALDER

EPA Science Inventory

Soil phosphorus (P) dynamics are controlled by the interaction of geochemical, biochemical and biological processes, and changing species composition or management may alter the relative importance of these processes. We examined the role of these processes in two plantations of...

77 FR 23618 - Authority To Manufacture and Distribute Postage Evidencing Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-20

... revision of the rules concerning inventory controls for Postage Evidencing Systems (PES). These changes are... System inventory control processes. (a) Each authorized provider of Postage Evidencing Systems must... custody and control of Postage Evidencing Systems and must specifically authorize in writing the proposed...

1H NMR-based metabolic profiling for evaluating poppy seed rancidity and brewing.

PubMed

Jawień, Ewa; Ząbek, Adam; Deja, Stanisław; Łukaszewicz, Marcin; Młynarz, Piotr

2015-12-01

Poppy seeds are widely used in household and commercial confectionery. The aim of this study was to demonstrate the application of metabolic profiling for industrial monitoring of the molecular changes which occur during minced poppy seed rancidity and brewing processes performed on raw seeds. Both forms of poppy seeds were obtained from a confectionery company. Proton nuclear magnetic resonance (1H NMR) was applied as the analytical method of choice together with multivariate statistical data analysis. Metabolic fingerprinting was applied as a bioprocess control tool to monitor rancidity with the trajectory of change and brewing progressions. Low molecular weight compounds were found to be statistically significant biomarkers of these bioprocesses. Changes in concentrations of chemical compounds were explained relative to the biochemical processes and external conditions. The obtained results provide valuable and comprehensive information to gain a better understanding of the biology of rancidity and brewing processes, while demonstrating the potential for applying NMR spectroscopy combined with multivariate data analysis tools for quality control in food industries involved in the processing of oilseeds. This precious and versatile information gives a better understanding of the biology of these processes.

A Video Recall Study of In-session Changes in Sentiment Override.

PubMed

Johnson, Lee N; Tambling, Rachel B; Anderson, Shayne R

2015-09-01

This study examines in-session changes in sentiment override over the first three sessions of couple therapy. Couples viewed a video recording of therapy sessions immediately after each of the first three sessions and continuously rated their level of sentiment override. Ninety-eight changes were randomly chosen for analysis. Three talk turns prior to each change was coded using the Family Relational Communication Control Coding System. Results show that changes in sentiment override occur frequently. Repeated incidents of communication control were related to negative change in sentiment override for females. Repeated incidents of being left out of the conversation were related to negative changes in sentiment override for females and positive changes for males. © 2014 Family Process Institute.

Challenges to a blow/fill/seal process with airborne microorganisms having different resistances to dry heat.

PubMed

Poisson, Patrick; Sinclair, Colin S; Tallentire, Alan

2006-01-01

Controlled challenges with air dispersed microorganisms having widely different resistances to dry heat, carried out on 624 BFS machine processing growth medium, have shown that higher the heat resistance, the greater the extent of vial contamination. Differences in heat resistance affected also the extent of vial contamination when parison and vial formation were knowingly manipulated through changes made to each of three process variables, provision of ballooning air, mould vacuum delay, and parison extrusion rate. The findings demonstrate that, in this investigational system, exposure of challenge micoorganisms to heat inherent in the process has a controlling influence on vial contamination, an influence that could also control microbiological risk in production environments.

Design and Verification of a Digital Controller for a 2-Piece Hemispherical Resonator Gyroscope

PubMed Central

Lee, Jungshin; Yun, Sung Wook; Rhim, Jaewook

2016-01-01

A Hemispherical Resonator Gyro (HRG) is the Coriolis Vibratory Gyro (CVG) that measures rotation angle or angular velocity using Coriolis force acting the vibrating mass. A HRG can be used as a rate gyro or integrating gyro without structural modification by simply changing the control scheme. In this paper, differential control algorithms are designed for a 2-piece HRG. To design a precision controller, the electromechanical modelling and signal processing must be pre-performed accurately. Therefore, the equations of motion for the HRG resonator with switched harmonic excitations are derived with the Duhamel Integral method. Electromechanical modeling of the resonator, electric module and charge amplifier is performed by considering the mode shape of a thin hemispherical shell. Further, signal processing and control algorithms are designed. The multi-flexing scheme of sensing, driving cycles and x, y-axis switching cycles is appropriate for high precision and low maneuverability systems. The differential control scheme is easily capable of rejecting the common mode errors of x, y-axis signals and changing the rate integrating mode on basis of these studies. In the rate gyro mode the controller is composed of Phase-Locked Loop (PLL), amplitude, quadrature and rate control loop. All controllers are designed on basis of a digital PI controller. The signal processing and control algorithms are verified through Matlab/Simulink simulations. Finally, a FPGA and DSP board with these algorithms is verified through experiments. PMID:27104539

Incidental mood state before dissonance induction affects attitude change.

PubMed

Martinie, Marie-Amélie; Almecija, Yves; Ros, Christine; Gil, Sandrine

2017-01-01

The way that incidental affect impacts attitude change brought about by controlled processes has so far been examined when the incidental affective state is generated after dissonance state induction. We therefore investigated attitude change when the incidental mood occurs prior to dissonance state induction. We expected a negative mood to induce systematic processing, and a positive mood to induce heuristic processing. Given that both systematic processing and attitude change are cognitively costly, we expected participants who experienced the dissonance state in a negative mood to have insufficient resources to allocate to attitude change. In our experiment, after mood induction (negative, neutral or positive), participants were divided into low-dissonance and high-dissonance groups. They then wrote a counterattitudinal essay. Analysis of their attitudes towards the essay topic indicated that attitude change did not occur in the negative incidental mood condition. Moreover, written productivity-one indicator of cognitive resource allocation-varied according to the type of incidental mood, and only predicted attitude change in the high-dissonance group. Our results suggest that incidental mood before dissonance induction influences the style of information processing and, by so doing, affects the extent of attitude change.

Incidental mood state before dissonance induction affects attitude change

PubMed Central

Martinie, Marie-Amélie; Almecija, Yves; Ros, Christine; Gil, Sandrine

2017-01-01

The way that incidental affect impacts attitude change brought about by controlled processes has so far been examined when the incidental affective state is generated after dissonance state induction. We therefore investigated attitude change when the incidental mood occurs prior to dissonance state induction. We expected a negative mood to induce systematic processing, and a positive mood to induce heuristic processing. Given that both systematic processing and attitude change are cognitively costly, we expected participants who experienced the dissonance state in a negative mood to have insufficient resources to allocate to attitude change. In our experiment, after mood induction (negative, neutral or positive), participants were divided into low-dissonance and high-dissonance groups. They then wrote a counterattitudinal essay. Analysis of their attitudes towards the essay topic indicated that attitude change did not occur in the negative incidental mood condition. Moreover, written productivity–one indicator of cognitive resource allocation–varied according to the type of incidental mood, and only predicted attitude change in the high-dissonance group. Our results suggest that incidental mood before dissonance induction influences the style of information processing and, by so doing, affects the extent of attitude change. PMID:28708861

Transition between 'base' and 'tip' carbon nanofiber growth modes

NASA Astrophysics Data System (ADS)

Melechko, Anatoli V.; Merkulov, Vladimir I.; Lowndes, Douglas H.; Guillorn, Michael A.; Simpson, Michael L.

2002-04-01

Carbon nanofibers (CNFs) have been synthesized by catalytically controlled dc glow discharge plasma-enhanced chemical vapor deposition (PECVD). Both base-type and tip-type nanofibers have been produced on identical substrates. We have observed a sharp transition between these two growth modes by controlling the kinetics of the growth process without changing the substrate and catalyst materials. This transition is brought about by changing the parameters used in the deposition process such as the flow ratio of the carbonaceous and etchant gasses and others. This study of the initial growth stages as a function of time for both regimes provides a basis for a model of the growth mode transition.

Monitoring endemic livestock diseases using laboratory diagnostic data: A simulation study to evaluate the performance of univariate process monitoring control algorithms.

PubMed

Lopes Antunes, Ana Carolina; Dórea, Fernanda; Halasa, Tariq; Toft, Nils

2016-05-01

Surveillance systems are critical for accurate, timely monitoring and effective disease control. In this study, we investigated the performance of univariate process monitoring control algorithms in detecting changes in seroprevalence for endemic diseases. We also assessed the effect of sample size (number of sentinel herds tested in the surveillance system) on the performance of the algorithms. Three univariate process monitoring control algorithms were compared: Shewart p Chart(1) (PSHEW), Cumulative Sum(2) (CUSUM) and Exponentially Weighted Moving Average(3) (EWMA). Increases in seroprevalence were simulated from 0.10 to 0.15 and 0.20 over 4, 8, 24, 52 and 104 weeks. Each epidemic scenario was run with 2000 iterations. The cumulative sensitivity(4) (CumSe) and timeliness were used to evaluate the algorithms' performance with a 1% false alarm rate. Using these performance evaluation criteria, it was possible to assess the accuracy and timeliness of the surveillance system working in real-time. The results showed that EWMA and PSHEW had higher CumSe (when compared with the CUSUM) from week 1 until the end of the period for all simulated scenarios. Changes in seroprevalence from 0.10 to 0.20 were more easily detected (higher CumSe) than changes from 0.10 to 0.15 for all three algorithms. Similar results were found with EWMA and PSHEW, based on the median time to detection. Changes in the seroprevalence were detected later with CUSUM, compared to EWMA and PSHEW for the different scenarios. Increasing the sample size 10 fold halved the time to detection (CumSe=1), whereas increasing the sample size 100 fold reduced the time to detection by a factor of 6. This study investigated the performance of three univariate process monitoring control algorithms in monitoring endemic diseases. It was shown that automated systems based on these detection methods identified changes in seroprevalence at different times. Increasing the number of tested herds would lead to faster detection. However, the practical implications of increasing the sample size (such as the costs associated with the disease) should also be taken into account. Copyright © 2016 Elsevier B.V. All rights reserved.

Application of Six Sigma/CAP methodology: controlling blood-product utilization and costs.

PubMed

Neri, Robert A; Mason, Cindy E; Demko, Lisa A

2008-01-01

Blood-product components are a limited commodity whose cost is rising. Many patients benefit from their use, but patients who receive transfusions face an unnecessary increased risk for developing infections; fatal, febrile, or allergic reactions; and circulatory overload. To improve patient care, safety, and resource stewardship, transfusion practices must be evaluated for appropriateness (Wilson et al. 2002). A multihospital health system undertook a rigorous study of blood-product utilization patterns and management processes to address cost-control problems in the organization. The system leveraged two process improvement tools widely implemented outside of the healthcare industry: (1) Six Sigma methodology to identify blood-utilization drivers and to standardize transfusion practice, and (2) change acceleration process model to drive effective change. The initiative resulted in a decreased rate of inappropriate transfusions of packed red blood cell from 16 percent to less than 5 percent, improved clinician use of a blood-component order form, establishment of internal benchmarks, enhanced laboratory-to-clinician communication, and better blood-product expense control. The project further demonstrated how out-of-industry tools and methodologies can be adopted, adapted, and systematically applied to generate positive change (Black and Revere 2006).

Quantitative naturalistic methods for detecting change points in psychotherapy research: an illustration with alliance ruptures.

PubMed

Eubanks-Carter, Catherine; Gorman, Bernard S; Muran, J Christopher

2012-01-01

Analysis of change points in psychotherapy process could increase our understanding of mechanisms of change. In particular, naturalistic change point detection methods that identify turning points or breakpoints in time series data could enhance our ability to identify and study alliance ruptures and resolutions. This paper presents four categories of statistical methods for detecting change points in psychotherapy process: criterion-based methods, control chart methods, partitioning methods, and regression methods. Each method's utility for identifying shifts in the alliance is illustrated using a case example from the Beth Israel Psychotherapy Research program. Advantages and disadvantages of the various methods are discussed.

Neural changes associated with appetite information processing in schizophrenic patients after 16 weeks of olanzapine treatment

PubMed Central

Stip, E; Lungu, O V; Anselmo, K; Letourneau, G; Mendrek, A; Stip, B; Lipp, O; Lalonde, P; Bentaleb, L A

2012-01-01

There is evidence that some atypical antipsychotics, including olanzapine, can produce unwanted metabolic side effects, weight gain and diabetes. However, neuronal correlates of change related to food information processing have not been investigated with these medications. We studied the effect of a pharmacological manipulation with an antipsychotic known to cause weight gain on metabolites, cognitive tasks and neural correlates related to food regulation. We used functional magnetic resonance imaging in conjunction with a task requiring visual processing of appetitive stimuli in schizophrenic patients and healthy controls before and after 16 weeks of antipsychotic medication with olanzapine. In patients, the psychological and neuronal changes associated following the treatment correlated with appetite control measures and metabolite levels in fasting blood samples. After 16 weeks of olanzapine treatment, the patients gained weight, increased their waist circumference, had fewer positive schizophrenia symptoms, a reduced ghrelin plasma concentration and an increased concentration of triglycerides, insulin and leptin. In premotor area, somatosensory cortices as well as bilaterally in the fusiform gyri, the olanzapine treatment increased the neural activity related to appetitive information in schizophrenic patients to similar levels relative to healthy individuals. However, a higher increase in sensitivity to appetitive stimuli after the treatment was observed in insular cortices, amygdala and cerebellum in schizophrenic patients as compared with healthy controls. Furthermore, these changes in neuronal activity correlated with changes in some metabolites and cognitive measurements related to appetite regulation. PMID:22714121

Process for operating equilibrium controlled reactions

DOEpatents

Nataraj, Shankar; Carvill, Brian Thomas; Hufton, Jeffrey Raymond; Mayorga, Steven Gerard; Gaffney, Thomas Richard; Brzozowski, Jeffrey Richard

2001-01-01

A cyclic process for operating an equilibrium controlled reaction in a plurality of reactors containing an admixture of an adsorbent and a reaction catalyst suitable for performing the desired reaction which is operated in a predetermined timed sequence wherein the heating and cooling requirements in a moving reaction mass transfer zone within each reactor are provided by indirect heat exchange with a fluid capable of phase change at temperatures maintained in each reactor during sorpreaction, depressurization, purging and pressurization steps during each process cycle.

Fed-batch control based upon the measurement of intracellular NADH

NASA Technical Reports Server (NTRS)

Armiger, W. B.; Lee, J. F.; Montalvo, L. M.; Forro, J. R.

1987-01-01

A series of experiments demonstrating that on-line measurements of intracellular NADH by culture fluorescence can be used to monitor and control the fermentation process are described. A distinct advantage of intercellular NADH measurements over other monitoring techniques such as pH and dissolved oxygen is that it directly measures real time events occurring within the cell rather than changes in the environment. When coupled with other measurement parameters, it can provide a finer degree of sophistication in process control.

Automatic detection of health changes using statistical process control techniques on measured transfer times of elderly.

PubMed

Baldewijns, Greet; Luca, Stijn; Nagels, William; Vanrumste, Bart; Croonenborghs, Tom

2015-01-01

It has been shown that gait speed and transfer times are good measures of functional ability in elderly. However, data currently acquired by systems that measure either gait speed or transfer times in the homes of elderly people require manual reviewing by healthcare workers. This reviewing process is time-consuming. To alleviate this burden, this paper proposes the use of statistical process control methods to automatically detect both positive and negative changes in transfer times. Three SPC techniques: tabular CUSUM, standardized CUSUM and EWMA, known for their ability to detect small shifts in the data, are evaluated on simulated transfer times. This analysis shows that EWMA is the best-suited method with a detection accuracy of 82% and an average detection time of 9.64 days.

Can Simulator Immersion Change Cognitive Style? Results from a Cross-Sectional Study of Field-Dependence--Independence in Air Traffic Control Students

ERIC Educational Resources Information Center

Van Eck, Richard N.; Fu, Hongxia; Drechsel, Paul V. J.

2015-01-01

Air traffic control (ATC) operations are critical to the U.S. aviation infrastructure, making ATC training a critical area of study. Because ATC performance is heavily dependent on visual processing, it is important to understand how to screen for or promote relevant visual processing abilities. While conventional wisdom has maintained that such…

Quality by control: Towards model predictive control of mammalian cell culture bioprocesses.

PubMed

Sommeregger, Wolfgang; Sissolak, Bernhard; Kandra, Kulwant; von Stosch, Moritz; Mayer, Martin; Striedner, Gerald

2017-07-01

The industrial production of complex biopharmaceuticals using recombinant mammalian cell lines is still mainly built on a quality by testing approach, which is represented by fixed process conditions and extensive testing of the end-product. In 2004 the FDA launched the process analytical technology initiative, aiming to guide the industry towards advanced process monitoring and better understanding of how critical process parameters affect the critical quality attributes. Implementation of process analytical technology into the bio-production process enables moving from the quality by testing to a more flexible quality by design approach. The application of advanced sensor systems in combination with mathematical modelling techniques offers enhanced process understanding, allows on-line prediction of critical quality attributes and subsequently real-time product quality control. In this review opportunities and unsolved issues on the road to a successful quality by design and dynamic control implementation are discussed. A major focus is directed on the preconditions for the application of model predictive control for mammalian cell culture bioprocesses. Design of experiments providing information about the process dynamics upon parameter change, dynamic process models, on-line process state predictions and powerful software environments seem to be a prerequisite for quality by control realization. © 2017 The Authors. Biotechnology Journal published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Software control and system configuration management - A process that works

NASA Technical Reports Server (NTRS)

Petersen, K. L.; Flores, C., Jr.

1983-01-01

A comprehensive software control and system configuration management process for flight-crucial digital control systems of advanced aircraft has been developed and refined to insure efficient flight system development and safe flight operations. Because of the highly complex interactions among the hardware, software, and system elements of state-of-the-art digital flight control system designs, a systems-wide approach to configuration control and management has been used. Specific procedures are implemented to govern discrepancy reporting and reconciliation, software and hardware change control, systems verification and validation testing, and formal documentation requirements. An active and knowledgeable configuration control board reviews and approves all flight system configuration modifications and revalidation tests. This flexible process has proved effective during the development and flight testing of several research aircraft and remotely piloted research vehicles with digital flight control systems that ranged from relatively simple to highly complex, integrated mechanizations.

Bioreactor process parameter screening utilizing a Plackett-Burman design for a model monoclonal antibody.

PubMed

Agarabi, Cyrus D; Schiel, John E; Lute, Scott C; Chavez, Brittany K; Boyne, Michael T; Brorson, Kurt A; Khan, Mansoora; Read, Erik K

2015-06-01

Consistent high-quality antibody yield is a key goal for cell culture bioprocessing. This endpoint is typically achieved in commercial settings through product and process engineering of bioreactor parameters during development. When the process is complex and not optimized, small changes in composition and control may yield a finished product of less desirable quality. Therefore, changes proposed to currently validated processes usually require justification and are reported to the US FDA for approval. Recently, design-of-experiments-based approaches have been explored to rapidly and efficiently achieve this goal of optimized yield with a better understanding of product and process variables that affect a product's critical quality attributes. Here, we present a laboratory-scale model culture where we apply a Plackett-Burman screening design to parallel cultures to study the main effects of 11 process variables. This exercise allowed us to determine the relative importance of these variables and identify the most important factors to be further optimized in order to control both desirable and undesirable glycan profiles. We found engineering changes relating to culture temperature and nonessential amino acid supplementation significantly impacted glycan profiles associated with fucosylation, β-galactosylation, and sialylation. All of these are important for monoclonal antibody product quality. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

Evaluation of risk and benefit in thermal effusivity sensor for monitoring lubrication process in pharmaceutical product manufacturing.

PubMed

Uchiyama, Jumpei; Kato, Yoshiteru; Uemoto, Yoshifumi

2014-08-01

In the process design of tablet manufacturing, understanding and control of the lubrication process is important from various viewpoints. A detailed analysis of thermal effusivity data in the lubrication process was conducted in this study. In addition, we evaluated the risk and benefit in the lubrication process by a detailed investigation. It was found that monitoring of thermal effusivity detected mainly the physical change of bulk density, which was changed by dispersal of the lubricant and the coating powder particle by the lubricant. The monitoring of thermal effusivity was almost the monitoring of bulk density, thermal effusivity could have a high correlation with tablet hardness. Moreover, as thermal effusivity sensor could detect not only the change of the conventional bulk density but also the fractional change of thermal conductivity and thermal capacity, two-phase progress of lubrication process could be revealed. However, each contribution of density, thermal conductivity, or heat capacity to thermal effusivity has the risk of fluctuation by formulation. After carefully considering the change factor with the risk to be changed by formulation, thermal effusivity sensor can be a useful tool for monitoring as process analytical technology, estimating tablet hardness and investigating the detailed mechanism of the lubrication process.

76 FR 70833 - National Emission Standards for Hazardous Air Pollutant Emissions for Primary Lead Processing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-15

... Classification System. \\2\\ Maximum Achievable Control Technology. Table 2 is not intended to be exhaustive, but..., methods, systems, or techniques that reduce the volume of or eliminate HAP emissions through process changes, substitution of materials, or other modifications; enclose systems or processes to eliminate...

Action Video Gaming and Cognitive Control: Playing First Person Shooter Games Is Associated with Improved Action Cascading but Not Inhibition

PubMed Central

Steenbergen, Laura; Sellaro, Roberta; Stock, Ann-Kathrin; Beste, Christian; Colzato, Lorenza S.

2015-01-01

There is a constantly growing interest in developing efficient methods to enhance cognitive functioning and/or to ameliorate cognitive deficits. One particular line of research focuses on the possibly cognitive enhancing effects that action video game (AVG) playing may have on game players. Interestingly, AVGs, especially first person shooter games, require gamers to develop different action control strategies to rapidly react to fast moving visual and auditory stimuli, and to flexibly adapt their behaviour to the ever-changing context. This study investigated whether and to what extent experience with such videogames is associated with enhanced performance on cognitive control tasks that require similar abilities. Experienced action videogame-players (AVGPs) and individuals with little to no videogame experience (NVGPs) performed a stop-change paradigm that provides a relatively well-established diagnostic measure of action cascading and response inhibition. Replicating previous findings, AVGPs showed higher efficiency in response execution, but not improved response inhibition (i.e. inhibitory control), as compared to NVGPs. More importantly, compared to NVGPs, AVGPs showed enhanced action cascading processes when an interruption (stop) and a change towards an alternative response were required simultaneously, as well as when such a change had to occur after the completion of the stop process. Our findings suggest that playing AVGs is associated with enhanced action cascading and multi-component behaviour without affecting inhibitory control. PMID:26655929

Action Video Gaming and Cognitive Control: Playing First Person Shooter Games Is Associated with Improved Action Cascading but Not Inhibition.

PubMed

Steenbergen, Laura; Sellaro, Roberta; Stock, Ann-Kathrin; Beste, Christian; Colzato, Lorenza S

2015-01-01

There is a constantly growing interest in developing efficient methods to enhance cognitive functioning and/or to ameliorate cognitive deficits. One particular line of research focuses on the possibly cognitive enhancing effects that action video game (AVG) playing may have on game players. Interestingly, AVGs, especially first person shooter games, require gamers to develop different action control strategies to rapidly react to fast moving visual and auditory stimuli, and to flexibly adapt their behaviour to the ever-changing context. This study investigated whether and to what extent experience with such videogames is associated with enhanced performance on cognitive control tasks that require similar abilities. Experienced action videogame-players (AVGPs) and individuals with little to no videogame experience (NVGPs) performed a stop-change paradigm that provides a relatively well-established diagnostic measure of action cascading and response inhibition. Replicating previous findings, AVGPs showed higher efficiency in response execution, but not improved response inhibition (i.e. inhibitory control), as compared to NVGPs. More importantly, compared to NVGPs, AVGPs showed enhanced action cascading processes when an interruption (stop) and a change towards an alternative response were required simultaneously, as well as when such a change had to occur after the completion of the stop process. Our findings suggest that playing AVGs is associated with enhanced action cascading and multi-component behaviour without affecting inhibitory control.

Biological and physical controls in the Southern Ocean on past millennial-scale atmospheric CO2 changes.

PubMed

Gottschalk, Julia; Skinner, Luke C; Lippold, Jörg; Vogel, Hendrik; Frank, Norbert; Jaccard, Samuel L; Waelbroeck, Claire

2016-05-17

Millennial-scale climate changes during the last glacial period and deglaciation were accompanied by rapid changes in atmospheric CO2 that remain unexplained. While the role of the Southern Ocean as a 'control valve' on ocean-atmosphere CO2 exchange has been emphasized, the exact nature of this role, in particular the relative contributions of physical (for example, ocean dynamics and air-sea gas exchange) versus biological processes (for example, export productivity), remains poorly constrained. Here we combine reconstructions of bottom-water [O2], export production and (14)C ventilation ages in the sub-Antarctic Atlantic, and show that atmospheric CO2 pulses during the last glacial- and deglacial periods were consistently accompanied by decreases in the biological export of carbon and increases in deep-ocean ventilation via southern-sourced water masses. These findings demonstrate how the Southern Ocean's 'organic carbon pump' has exerted a tight control on atmospheric CO2, and thus global climate, specifically via a synergy of both physical and biological processes.

Biological and physical controls in the Southern Ocean on past millennial-scale atmospheric CO2 changes

PubMed Central

Gottschalk, Julia; Skinner, Luke C.; Lippold, Jörg; Vogel, Hendrik; Frank, Norbert; Jaccard, Samuel L.; Waelbroeck, Claire

2016-01-01

Millennial-scale climate changes during the last glacial period and deglaciation were accompanied by rapid changes in atmospheric CO2 that remain unexplained. While the role of the Southern Ocean as a 'control valve' on ocean–atmosphere CO2 exchange has been emphasized, the exact nature of this role, in particular the relative contributions of physical (for example, ocean dynamics and air–sea gas exchange) versus biological processes (for example, export productivity), remains poorly constrained. Here we combine reconstructions of bottom-water [O2], export production and 14C ventilation ages in the sub-Antarctic Atlantic, and show that atmospheric CO2 pulses during the last glacial- and deglacial periods were consistently accompanied by decreases in the biological export of carbon and increases in deep-ocean ventilation via southern-sourced water masses. These findings demonstrate how the Southern Ocean's 'organic carbon pump' has exerted a tight control on atmospheric CO2, and thus global climate, specifically via a synergy of both physical and biological processes. PMID:27187527

"I'll stop procrastinating now!" Fostering specific processes of self-regulated learning to reduce academic procrastination.

PubMed

Grunschel, Carola; Patrzek, Justine; Klingsieck, Katrin B; Fries, Stefan

2018-01-01

Academic procrastination is considered to be a result of self-regulation failure having detrimental effects on students' well-being and academic performance. In the present study, we developed and evaluated a group training that aimed to reduce academic procrastination. We based the training on a cyclical process model of self-regulated learning, thus, focusing on improving deficient processes of self-regulated learning among academic procrastinators (e.g., time management, dealing with distractions). The training comprised five sessions and took place once a week for 90 min in groups of no more than 10 students. Overall, 106 students completed the training. We evaluated the training using a comprehensive control group design with repeated measures (three points of measurement); the control group was trained after the intervention group's training. The results showed that our training was successful. The trained intervention group significantly reduced academic procrastination and improved specific processes of self-regulated learning (e.g., time management, concentration), whereas the untrained control group showed no change regarding these variables. After the control group had also been trained, the control group also showed the expected favorable changes. The students rated the training overall as good and found it recommendable for procrastinating friends. Hence, fostering self-regulatory processes in our intervention was a successful attempt to support students in reducing academic procrastination. The evaluation of the training encourages us to adapt the training for different groups of procrastinators.

Online sensing and control of oil in process wastewater

NASA Astrophysics Data System (ADS)

Khomchenko, Irina B.; Soukhomlinoff, Alexander D.; Mitchell, T. F.; Selenow, Alexander E.

2002-02-01

Industrial processes, which eliminate high concentration of oil in their waste stream, find it extremely difficult to measure and control the water purification process. Most oil separation processes involve chemical separation using highly corrosive caustics, acids, surfactants, and emulsifiers. Included in the output of this chemical treatment process are highly adhesive tar-like globules, emulsified and surface oils, and other emulsified chemicals, in addition to suspended solids. The level of oil/hydrocarbons concentration in the wastewater process may fluctuate from 1 ppm to 10,000 ppm, depending upon the specifications of the industry and level of water quality control. The authors have developed a sensing technology, which provides the accuracy of scatter/absorption sensing in a contactless environment by combining these methodologies with reflective measurement. The sensitivity of the sensor may be modified by changing the fluid level control in the flow cell, allowing for a broad range of accurate measurement from 1 ppm to 10,000 ppm. Because this sensing system has been designed to work in a highly invasive environment, it can be placed close to the process source to allow for accurate real time measurement and control.

Control System Architectures, Technologies and Concepts for Near Term and Future Human Exploration of Space

NASA Technical Reports Server (NTRS)

Boulanger, Richard; Overland, David

2004-01-01

Technologies that facilitate the design and control of complex, hybrid, and resource-constrained systems are examined. This paper focuses on design methodologies, and system architectures, not on specific control methods that may be applied to life support subsystems. Honeywell and Boeing have estimated that 60-80Y0 of the effort in developing complex control systems is software development, and only 20-40% is control system development. It has also been shown that large software projects have failure rates of as high as 50-65%. Concepts discussed include the Unified Modeling Language (UML) and design patterns with the goal of creating a self-improving, self-documenting system design process. Successful architectures for control must not only facilitate hardware to software integration, but must also reconcile continuously changing software with much less frequently changing hardware. These architectures rely on software modules or components to facilitate change. Architecting such systems for change leverages the interfaces between these modules or components.

Biosimilarity Versus Manufacturing Change: Two Distinct Concepts.

PubMed

Declerck, Paul; Farouk-Rezk, Mourad; Rudd, Pauline M

2016-02-01

As products of living cells, biologics are far more complicated than small molecular-weight drugs not only with respect to size and structural complexity but also their sensitivity to manufacturing processes and post-translational changes. Most of the information on the manufacturing process of biotherapeutics is proprietary and hence not fully accessible to the public. This information gap represents a key challenge for biosimilar developers and plays a key role in explaining the differences in regulatory pathways required to demonstrate biosimilarity versus those required to ensure that a change in manufacturing process did not have implications on safety and efficacy. Manufacturing process changes are frequently needed for a variety of reasons including response to regulatory requirements, up scaling production, change in facility, change in raw materials, improving control of quality (consistency) or optimising production efficiency. The scope of the change is usually a key indicator of the scale of analysis required to evaluate the quality. In most cases, where the scope of the process change is limited, only quality and analytical studies should be sufficient while comparative clinical studies can be required in case of major changes (e.g., cell line changes). Biosimilarity exercises have been addressed differently by regulators on the understanding that biosimilar developers start with fundamental differences being a new cell line and also a knowledge gap of the innovator's processes, including culture media, purification processes, and potentially different formulations, and are thus required to ensure that differences from innovators do not result in differences in efficacy and safety.

Differential Influence of Safe Versus Threatening Facial Expressions on Decision-Making during an Inhibitory Control Task in Adolescence and Adulthood

PubMed Central

Cohen-Gilbert, JE; Killgore, WDS; White, CN; Schwab, ZJ; Crowley, DJ; Covell, MJ; Sneider, JT; Silveri, MM

2015-01-01

Social cognition matures dramatically during adolescence and into early adulthood, supported by continued improvements in inhibitory control. During this time, developmental changes in interpreting and responding to social signals such as facial expressions also occur. In the present study, subjects performed a Go No-Go task that required them to respond or inhibit responding based on threat or safety cues present in facial expressions. Subjects (N = 112) were divided into three age groups: adolescent (12–15 years), emerging adult (18–25 years) and adult (26–44 years). Analyses revealed a significant improvement in accuracy on No-Go trials, but not Go trials, during both safe and threat face conditions, with changes evident through early adulthood. In order to better identify the decision-making processes responsible for these changes in inhibitory control, a drift diffusion model (DDM) was fit to the accuracy and reaction time data, generating measures of caution, response bias, nondecision time (encoding + motor response), and drift rate (face processing efficiency). Caution and nondecision time both increased significantly with age while bias towards the Go response decreased. Drift rate analyses revealed significant age-related improvements in the ability to map threat faces to a No-Go response while drift rates on all other trial types were equivalent across age groups. These results suggest both stimulus-independent and stimulus-dependent processes contribute to improvements in inhibitory control in adolescence with processing of negative social cues being specifically impaired by self-regulatory demands. Findings from this novel investigation of emotional responsiveness integrated with inhibitory control may provide useful insights about healthy development that can be applied to better understanding adolescent risk taking behavior and the elevated incidence of related forms of psychopathology during this period of life. PMID:24387267

Cuban Mass Media: Organization, Control and Functions. Journalism Monographs Number Seventy-Eight.

ERIC Educational Resources Information Center

Nichols, John Spicer

The mass media as interdependent parts of a larger social system both control and are controlled by other subsystems. The various combinations of control, in turn, determine the functions the media system will serve. In the 1960's, the Cuban mass media underwent frequent change that reflected the volatility of the revolutionary process. Today,…

[Research on fuzzy proportional-integral-derivative control of master-slave minimally invasive operation robot driver].

PubMed

Zhao, Ximei; Ren, Chengyi; Liu, Hao; Li, Haogyi

2014-12-01

Robotic catheter minimally invasive operation requires that the driver control system has the advantages of quick response, strong anti-jamming and real-time tracking of target trajectory. Since the catheter parameters of itself and movement environment and other factors continuously change, when the driver is controlled using traditional proportional-integral-derivative (PID), the controller gain becomes fixed once the PID parameters are set. It can not change with the change of the parameters of the object and environmental disturbance so that its change affects the position tracking accuracy, and may bring a large overshoot endangering patients' vessel. Therefore, this paper adopts fuzzy PID control method to adjust PID gain parameters in the tracking process in order to improve the system anti-interference ability, dynamic performance and tracking accuracy. The simulation results showed that the fuzzy PID control method had a fast tracking performance and a strong robustness. Compared with those of traditional PID control, the feasibility and practicability of fuzzy PID control are verified in a robotic catheter minimally invasive operation.

Characterization of integrated optical CD for process control

NASA Astrophysics Data System (ADS)

Yu, Jackie; Uchida, Junichi; van Dommelen, Youri; Carpaij, Rene; Cheng, Shaunee; Pollentier, Ivan; Viswanathan, Anita; Lane, Lawrence; Barry, Kelly A.; Jakatdar, Nickhil

2004-05-01

The accurate measurement of CD (critical dimension) and its application to inline process control are key challenges for high yield and OEE (overall equipment efficiency) in semiconductor production. CD-SEM metrology, although providing the resolution necessary for CD evaluation, suffers from the well-known effect of resist shrinkage, making accuracy and stability of the measurements an issue. For sub-100 nm in-line process control, where accuracy and stability as well as speed are required, CD-SEM metrology faces serious limitations. In contrast, scatterometry, using broadband optical spectra taken from grating structures, does not suffer from such limitations. This technology is non-destructive and, in addition to CD, provides profile information and film thickness in a single measurement. Using Timbre's Optical Digital Profililometry (ODP) technology, we characterized the Process Window, using a iODP101 integrated optical CD metrology into a TEL Clean Track at IMEC. We demonstrate the Optical CD's high sensitivity to process change and its insensitivity to measurement noise. We demonstrate the validity of ODP modeling by showing its accurate response to known process changes built into the evaluation and its excellent correlation to CD-SEM. We will further discuss the intrinsic Optical CD metrology factors that affect the tool precision, accuracy and its correlation to CD-SEM.

Control of pore size and structure of tissue engineering scaffolds produced by supercritical fluid processing.

PubMed

Tai, Hongyun; Mather, Melissa L; Howard, Daniel; Wang, Wenxin; White, Lisa J; Crowe, John A; Morgan, Steve P; Chandra, Amit; Williams, David J; Howdle, Steven M; Shakesheff, Kevin M

2007-12-17

Tissue engineering scaffolds require a controlled pore size and structure to host tissue formation. Supercritical carbon dioxide (scCO2) processing may be used to form foamed scaffolds in which the escape of CO2 from a plasticized polymer melt generates gas bubbles that shape the developing pores. The process of forming these scaffolds involves a simultaneous change in phase in the CO2 and the polymer, resulting in rapid expansion of a surface area and changes in polymer rheological properties. Hence, the process is difficult to control with respect to the desired final pore size and structure. In this paper, we describe a detailed study of the effect of polymer chemical composition, molecular weight and processing parameters on final scaffold characteristics. The study focuses on poly(DL-lactic acid) (PDLLA) and poly(DL-lactic acid-co-glycolic acid) (PLGA) as polymer classes with potential application as controlled release scaffolds for growth factor delivery. Processing parameters under investigation were temperature (from 5 to 55 degrees C) and pressure (from 60 to 230 bar). A series of amorphous PDLLA and PLGA polymers with various molecular weights (from 13 KD to 96 KD) and/or chemical compositions (the mole percentage of glycolic acid in the polymers was 0, 15, 25, 35 and 50 respectively) were employed. The resulting scaffolds were characterised by optical microscopy, scanning electron microscopy (SEM), and micro X-ray computed tomography (microCT). This is the first detailed study on using these series polymers for scaffold formation by supercritical technique. This study has demonstrated that the pore size and structure of the supercritical PDLLA and PLGA scaffolds can be tailored by careful control of processing conditions.

Control chart pattern recognition using RBF neural network with new training algorithm and practical features.

PubMed

Addeh, Abdoljalil; Khormali, Aminollah; Golilarz, Noorbakhsh Amiri

2018-05-04

The control chart patterns are the most commonly used statistical process control (SPC) tools to monitor process changes. When a control chart produces an out-of-control signal, this means that the process has been changed. In this study, a new method based on optimized radial basis function neural network (RBFNN) is proposed for control chart patterns (CCPs) recognition. The proposed method consists of four main modules: feature extraction, feature selection, classification and learning algorithm. In the feature extraction module, shape and statistical features are used. Recently, various shape and statistical features have been presented for the CCPs recognition. In the feature selection module, the association rules (AR) method has been employed to select the best set of the shape and statistical features. In the classifier section, RBFNN is used and finally, in RBFNN, learning algorithm has a high impact on the network performance. Therefore, a new learning algorithm based on the bees algorithm has been used in the learning module. Most studies have considered only six patterns: Normal, Cyclic, Increasing Trend, Decreasing Trend, Upward Shift and Downward Shift. Since three patterns namely Normal, Stratification, and Systematic are very similar to each other and distinguishing them is very difficult, in most studies Stratification and Systematic have not been considered. Regarding to the continuous monitoring and control over the production process and the exact type detection of the problem encountered during the production process, eight patterns have been investigated in this study. The proposed method is tested on a dataset containing 1600 samples (200 samples from each pattern) and the results showed that the proposed method has a very good performance. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Mutuality Meets the Market: Analysing Changes in the Control of Quality Assurance in United Kingdom Higher Education 1992-2012

ERIC Educational Resources Information Center

Brown, Roger

2013-01-01

There has been a tendency in the literature to see changes in quality assurance as part of a process of increased state control. This article suggests a more nuanced approach that also takes account of the different trajectories of the pre- and post-1992 sectors. It finds that whilst there have been increases in both state oversight and market…

Authentic Assessment in the Literature Classroom.

ERIC Educational Resources Information Center

Walker, Michelle

1997-01-01

Discusses various ways to strike a balance between total teacher control and total student control of the assessment process in a high school American literature course. Discusses research projects, advertising flyers, newspapers, the "transcendental change plan," and the thematic mobile. (RS)

Multivariate statistical process control of a continuous pharmaceutical twin-screw granulation and fluid bed drying process.

PubMed

Silva, A F; Sarraguça, M C; Fonteyne, M; Vercruysse, J; De Leersnyder, F; Vanhoorne, V; Bostijn, N; Verstraeten, M; Vervaet, C; Remon, J P; De Beer, T; Lopes, J A

2017-08-07

A multivariate statistical process control (MSPC) strategy was developed for the monitoring of the ConsiGma™-25 continuous tablet manufacturing line. Thirty-five logged variables encompassing three major units, being a twin screw high shear granulator, a fluid bed dryer and a product control unit, were used to monitor the process. The MSPC strategy was based on principal component analysis of data acquired under normal operating conditions using a series of four process runs. Runs with imposed disturbances in the dryer air flow and temperature, in the granulator barrel temperature, speed and liquid mass flow and in the powder dosing unit mass flow were utilized to evaluate the model's monitoring performance. The impact of the imposed deviations to the process continuity was also evaluated using Hotelling's T 2 and Q residuals statistics control charts. The influence of the individual process variables was assessed by analyzing contribution plots at specific time points. Results show that the imposed disturbances were all detected in both control charts. Overall, the MSPC strategy was successfully developed and applied. Additionally, deviations not associated with the imposed changes were detected, mainly in the granulator barrel temperature control. Copyright © 2017 Elsevier B.V. All rights reserved.

Mutation particle swarm optimization of the BP-PID controller for piezoelectric ceramics

NASA Astrophysics Data System (ADS)

Zheng, Huaqing; Jiang, Minlan

2016-01-01

PID control is the most common used method in industrial control because its structure is simple and it is easy to implement. PID controller has good control effect, now it has been widely used. However, PID method has a few limitations. The overshoot of the PID controller is very big. The adjustment time is long. When the parameters of controlled plant are changing over time, the parameters of controller could hardly change automatically to adjust to changing environment. Thus, it can't meet the demand of control quality in the process of controlling piezoelectric ceramic. In order to effectively control the piezoelectric ceramic and improve the control accuracy, this paper replaced the learning algorithm of the BP with the mutation particle swarm optimization algorithm(MPSO) on the process of the parameters setting of BP-PID. That designed a better self-adaptive controller which is combing the BP neural network based on mutation particle swarm optimization with the conventional PID control theory. This combination is called the MPSO-BP-PID. In the mechanism of the MPSO, the mutation operation is carried out with the fitness variance and the global best fitness value as the standard. That can overcome the precocious of the PSO and strengthen its global search ability. As a result, the MPSO-BP-PID can complete controlling the controlled plant with higher speed and accuracy. Therefore, the MPSO-BP-PID is applied to the piezoelectric ceramic. It can effectively overcome the hysteresis, nonlinearity of the piezoelectric ceramic. In the experiment, compared with BP-PID and PSO-BP-PID, it proved that MPSO is effective and the MPSO-BP-PID has stronger adaptability and robustness.

Cumulative sum control charts for monitoring geometrically inflated Poisson processes: An application to infectious disease counts data.

PubMed

Rakitzis, Athanasios C; Castagliola, Philippe; Maravelakis, Petros E

2018-02-01

In this work, we study upper-sided cumulative sum control charts that are suitable for monitoring geometrically inflated Poisson processes. We assume that a process is properly described by a two-parameter extension of the zero-inflated Poisson distribution, which can be used for modeling count data with an excessive number of zero and non-zero values. Two different upper-sided cumulative sum-type schemes are considered, both suitable for the detection of increasing shifts in the average of the process. Aspects of their statistical design are discussed and their performance is compared under various out-of-control situations. Changes in both parameters of the process are considered. Finally, the monitoring of the monthly cases of poliomyelitis in the USA is given as an illustrative example.

Is altered central pain processing related to disease stage in chronic pancreatitis patients with pain? An exploratory study.

PubMed

Bouwense, Stefan A W; Olesen, Søren S; Drewes, Asbjørn M; Frøkjær, Jens B; van Goor, Harry; Wilder-Smith, Oliver H G

2013-01-01

The most dominant feature in chronic pancreatitis is intense abdominal pain. Changes in spinal and/or supraspinal central nervous system pain processing due to visceral nociceptive input play an important role in this pain. How altered pain processing is related to disease stage still needs study. Sixty chronic pancreatitis patients were compared to 15 healthy controls. Two subgroups of pancreatitis patients were defined based on the M-ANNHEIM severity index of chronic pancreatitis; i.e. moderate and severe. Pain detection and tolerance thresholds for pressure and electric stimuli were measured in six selected dermatomes (C5, T4, T10, L1, L4 and T10BACK). In addition, the conditioned pain modulation response to cold pressor task was determined. These measures were compared between the healthy controls and chronic pancreatitis patients. Severe pancreatitis patients showed lower pain thresholds than moderate pancreatitis patients or healthy volunteers. Healthy controls showed a significantly larger conditioned pain modulation response compared to all chronic pancreatitis patients taken together. The present study confirms that chronic pancreatitis patients show signs of altered central processing of nociception compared to healthy controls. The study further suggests that these changes, i.e. central sensitization, may be influenced by disease stage. These findings underline the need to take altered central pain processing into account when managing the pain of chronic pancreatitis.

Interaction of thermal and mechanical processes in steep permafrost rock walls: A conceptual approach

NASA Astrophysics Data System (ADS)

Draebing, D.; Krautblatter, M.; Dikau, R.

2014-12-01

Degradation of permafrost rock wall decreases stability and can initiate rock slope instability of all magnitudes. Rock instability is controlled by the balance of shear forces and shear resistances. The sensitivity of slope stability to warming results from a complex interplay of shear forces and resistances. Conductive, convective and advective heat transport processes act to warm, degrade and thaw permafrost in rock walls. On a seasonal scale, snow cover changes are a poorly understood key control of the timing and extent of thawing and permafrost degradation. We identified two potential critical time windows where shear forces might exceed shear resistances of the rock. In early summer combined hydrostatic and cryostatic pressure can cause a peak in shear force exceeding high frozen shear resistance and in autumn fast increasing shear forces can exceed slower increasing shear resistance. On a multiannual system scale, shear resistances change from predominantly rock-mechanically to ice-mechanically controlled. Progressive rock bridge failure results in an increase of sensitivity to warming. Climate change alters snow cover and duration and, hereby, thermal and mechanical processes in the rock wall. Amplified thawing of permafrost will result in higher rock slope instability and rock fall activity. We present a holistic conceptual approach connecting thermal and mechanical processes, validate parts of the model with geophysical and kinematic data and develop future scenarios to enhance understanding on system scale.

Improvement of the Performance of an Electrocoagulation Process System Using Fuzzy Control of pH.

PubMed

Demirci, Yavuz; Pekel, Lutfiye Canan; Altinten, Ayla; Alpbaz, Mustafa

2015-12-01

The removal efficiencies of electrocoagulation (EC) systems are highly dependent on the initial value of pH. If an EC system has an acidic influent, the pH of the effluent increases during the treatment process; conversely, if such a system has an alkaline influent, the pH of the effluent decreases during the treatment process. Thus, changes in the pH of the wastewater affect the efficiency of the EC process. In this study, we investigated the dynamic effects of pH. To evaluate approaches for preventing increases in the pH of the system, the MATLAB/Simulink program was used to develop and evaluate an on-line computer-based system for pH control. The aim of this work was to study Proportional-Integral-Derivative (PID) control and fuzzy control of the pH of a real textile wastewater purification process using EC. The performances and dynamic behaviors of these two control systems were evaluated based on determinations of COD, colour, and turbidity removal efficiencies.

Electron beam deflection control system of a welding and surface modification installation

NASA Astrophysics Data System (ADS)

Koleva, E.; Dzharov, V.; Gerasimov, V.; Tsvetkov, K.; Mladenov, G.

2018-03-01

In the present work, we examined the patterns of the electron beam motion when controlling the transverse with respect to the axis of the beam homogeneous magnetic field created by the coils of the deflection system the electron gun. During electron beam processes, the beam motion is determined the process type (welding, surface modification, etc.), the technological mode, the design dimensions of the electron gun and the shape of the processed samples. The electron beam motion is defined by the cumulative action of two cosine-like control signals generated by a functional generator. The signal control is related to changing the amplitudes, frequencies and phases (phase differences) of the generated voltages. We realized the motion control by applying a graphical user interface developed by us and an Arduino Uno programmable microcontroller. The signals generated were calibrated using experimental data from the available functional generator. The free and precise motion on arbitrary trajectories determines the possible applications of an electron beam process to carrying out various scientific research tasks in material processing.

Metacognitive monitoring and control in visual change detection: Implications for situation awareness and cognitive control

PubMed Central

McAnally, Ken I.; Morris, Adam P.; Best, Christopher

2017-01-01

Metacognitive monitoring and control of situation awareness (SA) are important for a range of safety-critical roles (e.g., air traffic control, military command and control). We examined the factors affecting these processes using a visual change detection task that included representative tactical displays. SA was assessed by asking novice observers to detect changes to a tactical display. Metacognitive monitoring was assessed by asking observers to estimate the probability that they would correctly detect a change, either after study of the display and before the change (judgement of learning; JOL) or after the change and detection response (judgement of performance; JOP). In Experiment 1, observers failed to detect some changes to the display, indicating imperfect SA, but JOPs were reasonably well calibrated to objective performance. Experiment 2 examined JOLs and JOPs in two task contexts: with study-time limits imposed by the task or with self-pacing to meet specified performance targets. JOPs were well calibrated in both conditions as were JOLs for high performance targets. In summary, observers had limited SA, but good insight about their performance and learning for high performance targets and allocated study time appropriately. PMID:28915244

Modelling and control for laser based welding processes: modern methods of process control to improve quality of laser-based joining methods

NASA Astrophysics Data System (ADS)

Zäh, Ralf-Kilian; Mosbach, Benedikt; Hollwich, Jan; Faupel, Benedikt

2017-02-01

To ensure the competitiveness of manufacturing companies it is indispensable to optimize their manufacturing processes. Slight variations of process parameters and machine settings have only marginally effects on the product quality. Therefore, the largest possible editing window is required. Such parameters are, for example, the movement of the laser beam across the component for the laser keyhole welding. That`s why it is necessary to keep the formation of welding seams within specified limits. Therefore, the quality of laser welding processes is ensured, by using post-process methods, like ultrasonic inspection, or special in-process methods. These in-process systems only achieve a simple evaluation which shows whether the weld seam is acceptable or not. Furthermore, in-process systems use no feedback for changing the control variables such as speed of the laser or adjustment of laser power. In this paper the research group presents current results of the research field of Online Monitoring, Online Controlling and Model predictive controlling in laser welding processes to increase the product quality. To record the characteristics of the welding process, tested online methods are used during the process. Based on the measurement data, a state space model is ascertained, which includes all the control variables of the system. Depending on simulation tools the model predictive controller (MPC) is designed for the model and integrated into an NI-Real-Time-System.

Computer software configuration description, 241-AY and 241-AZ tank farm MICON automation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winkelman, W.D.

This document describes the configuration process, choices and conventions used during the configuration activities, and issues involved in making changes to the configuration. Includes the master listings of the Tag definitions, which should be revised to authorize any changes. Revision 2 incorporates minor changes to ensure the document setpoints accurately reflect limits (including exhaust stack flow of 800 scfm) established in OSD-T-151-00019. The MICON DCS software controls and monitors the instrumentation and equipment associated with plant systems and processes.

Event-driven simulation of the state institution activity for the service provision based on business processes

NASA Astrophysics Data System (ADS)

Kataev, M. Yu.; Loseva, N. V.; Mitsel, A. A.; Bulysheva, L. A.; Kozlov, S. V.

2017-01-01

The paper presents an approach, based on business processes, assessment and control of the state of the state institution, the social insurance Fund. The paper describes the application of business processes, such as items with clear measurable parameters that need to be determined, controlled and changed for management. The example of one of the business processes of the state institutions, which shows the ability to solve management tasks, is given. The authors of the paper demonstrate the possibility of applying the mathematical apparatus of imitative simulation for solving management tasks.

Expanding the Navy’s Managers Internal Control Program’s (MICP) Capability to Prepare for External Financial Audits

DTIC Science & Technology

2015-06-01

adequate documentation to substantiate transactions , and effective internal controls surrounding business processes along with the verification that...organization, such as its personnel, processes, and objectives. The internal auditing profession brings a composite of in-depth knowledge and best business ...with internal auditors. Organizations should keep internal auditors abreast of changes in expectations as the business evolves. Doing so helps

Control of galactosylated glycoforms distribution in cell culture system.

PubMed

McCracken, Neil A; Kowle, Ronald; Ouyang, Anli

2014-01-01

Cell culture process conditions including media components and bioreactor operation conditions have a profound impact on recombinant protein quality attributes. Considerable changes in the distribution of galactosylated glycoforms (G0F, G1F, and G2F) were observed across multiple CHO derived recombinant proteins in development at Eli Lilly and Company when switching to a new chemically defined (CD) media platform condition. In the new CD platform, significantly lower G0F percentages and higher G1F and G2F were observed. These changes were of interest as glycosylation heterogeneity can impact the effectiveness of a protein. A systematic investigation was done to understand the root cause of the change and control strategy for galactosylated glycoforms distribution. It was found that changes in asparagine concentration could result in a corresponding change in G0F, G1F, and G2F distribution. A follow-up study examined a wider range of asparagine concentration and it was found that G0F, G1F, and G2F percentage could be titrated by adjusting asparagine concentration. The observed changes in heterogeneity from changing asparagine concentration are due to resulting changes in ammonium metabolism. Further study ascertained that different integrated ammonium level during the cell culture process could control G0F, G1F, and G2F percentage distribution. A mechanism hypothesis is proposed that integrated ammonium level impacts intracellular pH, which further regulates β-1, 4 galactosyltransferase activity. © 2014 American Institute of Chemical Engineers.

Training of Working Memory Impacts Neural Processing of Vocal Pitch Regulation

PubMed Central

Li, Weifeng; Guo, Zhiqiang; Jones, Jeffery A.; Huang, Xiyan; Chen, Xi; Liu, Peng; Chen, Shaozhen; Liu, Hanjun

2015-01-01

Working memory training can improve the performance of tasks that were not trained. Whether auditory-motor integration for voice control can benefit from working memory training, however, remains unclear. The present event-related potential (ERP) study examined the impact of working memory training on the auditory-motor processing of vocal pitch. Trained participants underwent adaptive working memory training using a digit span backwards paradigm, while control participants did not receive any training. Before and after training, both trained and control participants were exposed to frequency-altered auditory feedback while producing vocalizations. After training, trained participants exhibited significantly decreased N1 amplitudes and increased P2 amplitudes in response to pitch errors in voice auditory feedback. In addition, there was a significant positive correlation between the degree of improvement in working memory capacity and the post-pre difference in P2 amplitudes. Training-related changes in the vocal compensation, however, were not observed. There was no systematic change in either vocal or cortical responses for control participants. These findings provide evidence that working memory training impacts the cortical processing of feedback errors in vocal pitch regulation. This enhanced cortical processing may be the result of increased neural efficiency in the detection of pitch errors between the intended and actual feedback. PMID:26553373

Visual scanpath abnormalities in 22q11.2 deletion syndrome: is this a face specific deficit?

PubMed

McCabe, Kathryn; Rich, Dominique; Loughland, Carmel Maree; Schall, Ulrich; Campbell, Linda Elisabet

2011-09-30

People with 22q11.2 deletion syndrome (22q11DS) have deficits in face emotion recognition. However, it is not known whether this is a deficit specific to faces, or represents maladaptive information processing strategies to complex stimuli in general. This study examined the specificity of face emotion processing deficits in 22q11DS by exploring recognition accuracy and visual scanpath performance to a Faces task compared to a Weather Scene task. Seventeen adolescents with 22q11DS (11=females, age=17.4) and 18 healthy controls (11=females, age=17.7) participated in the study. People with 22q11DS displayed an overall impoverished scanning strategy to face and weather stimuli alike, resulting in poorer accuracy across all stimuli for the 22q11DS participants compared to controls. While the control subjects altered their information processing in response to faces, a similar change was not present in the 22q11DS group indicating different visual scanpath strategies to identify category within each of the tasks, of which faces appear to represent a particularly difficult subcategory. To conclude, while this study indicates that people with 22q11DS have a general visual processing deficit, the lack of strategic change between tasks suggest that the 22q11DS group did not adapt to the change in stimuli content as well as the controls, indicative of cognitive inflexibility rather than a face specific deficit. Copyright © 2011 Elsevier Ltd. All rights reserved.

Health behavior change in advance care planning: an agent-based model.

PubMed

Ernecoff, Natalie C; Keane, Christopher R; Albert, Steven M

2016-02-29

A practical and ethical challenge in advance care planning research is controlling and intervening on human behavior. Additionally, observing dynamic changes in advance care planning (ACP) behavior proves difficult, though tracking changes over time is important for intervention development. Agent-based modeling (ABM) allows researchers to integrate complex behavioral data about advance care planning behaviors and thought processes into a controlled environment that is more easily alterable and observable. Literature to date has not addressed how best to motivate individuals, increase facilitators and reduce barriers associated with ACP. We aimed to build an ABM that applies the Transtheoretical Model of behavior change to ACP as a health behavior and accurately reflects: 1) the rates at which individuals complete the process, 2) how individuals respond to barriers, facilitators, and behavioral variables, and 3) the interactions between these variables. We developed a dynamic ABM of the ACP decision making process based on the stages of change posited by the Transtheoretical Model. We integrated barriers, facilitators, and other behavioral variables that agents encounter as they move through the process. We successfully incorporated ACP barriers, facilitators, and other behavioral variables into our ABM, forming a plausible representation of ACP behavior and decision-making. The resulting distributions across the stages of change replicated those found in the literature, with approximately half of participants in the action-maintenance stage in both the model and the literature. Our ABM is a useful method for representing dynamic social and experiential influences on the ACP decision making process. This model suggests structural interventions, e.g. increasing access to ACP materials in primary care clinics, in addition to improved methods of data collection for behavioral studies, e.g. incorporating longitudinal data to capture behavioral dynamics.

Improved compliance by BPM-driven workflow automation.

PubMed

Holzmüller-Laue, Silke; Göde, Bernd; Fleischer, Heidi; Thurow, Kerstin

2014-12-01

Using methods and technologies of business process management (BPM) for the laboratory automation has important benefits (i.e., the agility of high-level automation processes, rapid interdisciplinary prototyping and implementation of laboratory tasks and procedures, and efficient real-time process documentation). A principal goal of the model-driven development is the improved transparency of processes and the alignment of process diagrams and technical code. First experiences of using the business process model and notation (BPMN) show that easy-to-read graphical process models can achieve and provide standardization of laboratory workflows. The model-based development allows one to change processes quickly and an easy adaption to changing requirements. The process models are able to host work procedures and their scheduling in compliance with predefined guidelines and policies. Finally, the process-controlled documentation of complex workflow results addresses modern laboratory needs of quality assurance. BPMN 2.0 as an automation language to control every kind of activity or subprocess is directed to complete workflows in end-to-end relationships. BPMN is applicable as a system-independent and cross-disciplinary graphical language to document all methods in laboratories (i.e., screening procedures or analytical processes). That means, with the BPM standard, a communication method of sharing process knowledge of laboratories is also available. © 2014 Society for Laboratory Automation and Screening.

Work-induced changes in feelings of mastery.

PubMed

Bradley, Graham L

2010-01-01

Past theory and research indicate that conditions of work can have lasting effects on job incumbents. R. A. Karasek and T. Theorell (1990), for example, proposed that workers' feelings of mastery increase with levels of job demands and job control, and that these effects are mediated by the process of active learning. To test these propositions, 657 school teachers completed scales assessing job demands, control, active learning, and mastery on 2 occasions, 8 months apart. As hypothesized, job control predicted change in mastery, an effect that was mediated by active learning. Job demands had a weaker effect on change in mastery. The demands-mastery relationship was moderated by job control, so that under conditions of high control, but not low control, increasing job demands were associated with gains in mastery. The findings partially support R. A. Karasek and T. Theorell's (1990) predictions regarding the main, interactive, and mediated effects of job conditions on employee mastery.

Age-related macular degeneration changes the processing of visual scenes in the brain.

PubMed

Ramanoël, Stephen; Chokron, Sylvie; Hera, Ruxandra; Kauffmann, Louise; Chiquet, Christophe; Krainik, Alexandre; Peyrin, Carole

2018-01-01

In age-related macular degeneration (AMD), the processing of fine details in a visual scene, based on a high spatial frequency processing, is impaired, while the processing of global shapes, based on a low spatial frequency processing, is relatively well preserved. The present fMRI study aimed to investigate the residual abilities and functional brain changes of spatial frequency processing in visual scenes in AMD patients. AMD patients and normally sighted elderly participants performed a categorization task using large black and white photographs of scenes (indoors vs. outdoors) filtered in low and high spatial frequencies, and nonfiltered. The study also explored the effect of luminance contrast on the processing of high spatial frequencies. The contrast across scenes was either unmodified or equalized using a root-mean-square contrast normalization in order to increase contrast in high-pass filtered scenes. Performance was lower for high-pass filtered scenes than for low-pass and nonfiltered scenes, for both AMD patients and controls. The deficit for processing high spatial frequencies was more pronounced in AMD patients than in controls and was associated with lower activity for patients than controls not only in the occipital areas dedicated to central and peripheral visual fields but also in a distant cerebral region specialized for scene perception, the parahippocampal place area. Increasing the contrast improved the processing of high spatial frequency content and spurred activation of the occipital cortex for AMD patients. These findings may lead to new perspectives for rehabilitation procedures for AMD patients.

A Comprehensive Examination of Changes in Psychological Flexibility Following Acceptance and Commitment Therapy for Chronic Pain.

PubMed

Scott, Whitney; Hann, Katie E J; McCracken, Lance M

Acceptance and commitment therapy (ACT) for chronic pain aims to improve patient functioning by fostering greater psychological flexibility. While promising, ACT treatment process research in the context of chronic pain so far has only focused on a few of the processes of psychological flexibility. Therefore, this study aimed to more comprehensively examine changes in processes of psychological flexibility following an ACT-based treatment for chronic pain, and to examine change in these processes in relation to improvements in patient functioning. Individuals with chronic pain attending an interdisciplinary ACT-based rehabilitation program completed measures of pain, functioning, depression, pain acceptance, cognitive fusion, decentering, and committed action at pre- and post-treatment and during a nine-month follow-up. Significant improvements were observed from pre- to post-treatment and pre-treatment to follow-up on each of the treatment outcome and process variables. Regression analyses indicated that change in psychological flexibility processes cumulatively explained 6-27 % of the variance in changes in functioning and depression over both assessment periods, even after controlling for changes in pain intensity. Further research is needed to maximize the effectiveness of ACT for chronic pain, and to determine whether larger improvements in the processes of psychological flexibility under study will produce better patient outcomes, as predicted by the psychological flexibility model.

Shaping carbon nanostructures by controlling the synthesis process

NASA Astrophysics Data System (ADS)

Merkulov, Vladimir I.; Guillorn, Michael A.; Lowndes, Douglas H.; Simpson, Michael L.; Voelkl, Edgar

2001-08-01

The ability to control the nanoscale shape of nanostructures in a large-scale synthesis process is an essential and elusive goal of nanotechnology research. Here, we report significant progress toward that goal. We have developed a technique that enables controlled synthesis of nanoscale carbon structures with conical and cylinder-on-cone shapes and provides the capability to dynamically change the nanostructure shape during the synthesis process. In addition, we present a phenomenological model that explains the formation of these nanostructures and provides insight into methods for precisely engineering their shape. Since the growth process we report is highly deterministic in allowing large-scale synthesis of precisely engineered nanoscale components at defined locations, our approach provides an important tool for a practical nanotechnology.

Roll-to-Roll Advanced Materials Manufacturing DOE Lab Consortium - FY16 Annual Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniel, Claus; Wood, III, David L.; Krumdick, Gregory

2016-12-01

A DOE laboratory consortium comprised of ORNL, ANL, NREL and LBNL, coordinating with Kodak’s Eastman Business Park (Kodak) and other selected industry partners, was formed to address enhancing battery electrode performance and R2R manufacturing challenges. The objective of the FY 2016 seed project was to develop a materials genome synthesis process amenable to R2R manufacturing and to provide modeling, simulation, processing, and manufacturing techniques that demonstrate the feasibility of process controls and scale-up potential for improved battery electrodes. The research efforts were to predict and measure changes and results in electrode morphology and performance based on process condition changes; tomore » evaluate mixed, active, particle size deposition and drying for novel electrode materials; and to model various process condition changes and the resulting morphology and electrode performance.« less

Breakthrough Performance: Creating the Innovative Enterprise.

ERIC Educational Resources Information Center

Hanson, Diane; Bapst, Jerry

1998-01-01

Illustrates a new model for innovative enterprises by reviewing the process an instruments and control systems manufacturer used to implement changes in its corporate operating philosophy. Outlines the "Quantum Model": spheres of control, influence, interest, and UNs (unknown, unpredictable, uncontrollable, uncomfortable). Discusses…

40 CFR 62.14575 - What must I do if I close my CISWI unit and then restart it?

Code of Federal Regulations, 2010 CFR

2010-07-01

... retrofit construction of control devices so that when the affected CISWI unit is brought online, all necessary process changes and air pollution control devices operate as designed. Waste Management Plan ...

Psychosocial mediators of change in physical activity in the Welsh national exercise referral scheme: secondary analysis of a randomised controlled trial.

PubMed

Littlecott, Hannah J; Moore, Graham F; Moore, Laurence; Murphy, Simon

2014-08-27

While an increasing number of randomised controlled trials report impacts of exercise referral schemes (ERS) on physical activity, few have investigated the mechanisms through which increases in physical activity are produced. This study examines whether a National Exercise Referral Scheme (NERS) in Wales is associated with improvements in autonomous motivation, self-efficacy and social support, and whether change in physical activity is mediated by change in these psychosocial processes. A pragmatic randomised controlled trial of NERS across 12 LHBs in Wales. Questionnaires measured demographic data and physical activity at baseline. Participants (N = 2160) with depression, anxiety or CHD risk factors were referred by health professionals and randomly assigned to control or intervention. At six months psychological process measures were collected by questionnaire. At 12 months physical activity was assessed by 7 Day PAR telephone interview. Regressions tested intervention effects on psychosocial variables, physical activity before and after adjusting for mediators and socio demographic patterning. Significant intervention effects were found for autonomous motivation and social support for exercise at 6 months. No intervention effect was observed for self-efficacy. The data are consistent with a hypothesis of partial mediation of the intervention effect by autonomous motivation. Analysis of moderators showed significant improvements in relative autonomy in all subgroups. The greatest improvements in autonomous motivation were observed among patients who were least active at baseline. The present study offered key insights into psychosocial processes of change in an exercise referral scheme, with effects on physical activity mediated by autonomous motivation. Findings support the use of self-determination theory as a framework for ERS. Further research is required to explain socio-demographic patterning in responses to ERS, with changes in motivation occurring among all sub-groups of participants, though not always leading to higher adherence or behavioural change. This highlights the importance of socio-ecological approaches to developing and evaluating behaviour change interventions, which consider factors beyond the individual, including conditions in which improved motivation does or does not produce behavioural change. ISRCTN47680448.

Quantitative modeling of soil genesis processes

NASA Technical Reports Server (NTRS)

Levine, E. R.; Knox, R. G.; Kerber, A. G.

1992-01-01

For fine spatial scale simulation, a model is being developed to predict changes in properties over short-, meso-, and long-term time scales within horizons of a given soil profile. Processes that control these changes can be grouped into five major process clusters: (1) abiotic chemical reactions; (2) activities of organisms; (3) energy balance and water phase transitions; (4) hydrologic flows; and (5) particle redistribution. Landscape modeling of soil development is possible using digitized soil maps associated with quantitative soil attribute data in a geographic information system (GIS) framework to which simulation models are applied.

A case study: application of statistical process control tool for determining process capability and sigma level.

PubMed

Chopra, Vikram; Bairagi, Mukesh; Trivedi, P; Nagar, Mona

2012-01-01

Statistical process control is the application of statistical methods to the measurement and analysis of variation process. Various regulatory authorities such as Validation Guidance for Industry (2011), International Conference on Harmonisation ICH Q10 (2009), the Health Canada guidelines (2009), Health Science Authority, Singapore: Guidance for Product Quality Review (2008), and International Organization for Standardization ISO-9000:2005 provide regulatory support for the application of statistical process control for better process control and understanding. In this study risk assessments, normal probability distributions, control charts, and capability charts are employed for selection of critical quality attributes, determination of normal probability distribution, statistical stability, and capability of production processes, respectively. The objective of this study is to determine tablet production process quality in the form of sigma process capability. By interpreting data and graph trends, forecasting of critical quality attributes, sigma process capability, and stability of process were studied. The overall study contributes to an assessment of process at the sigma level with respect to out-of-specification attributes produced. Finally, the study will point to an area where the application of quality improvement and quality risk assessment principles for achievement of six sigma-capable processes is possible. Statistical process control is the most advantageous tool for determination of the quality of any production process. This tool is new for the pharmaceutical tablet production process. In the case of pharmaceutical tablet production processes, the quality control parameters act as quality assessment parameters. Application of risk assessment provides selection of critical quality attributes among quality control parameters. Sequential application of normality distributions, control charts, and capability analyses provides a valid statistical process control study on process. Interpretation of such a study provides information about stability, process variability, changing of trends, and quantification of process ability against defective production. Comparative evaluation of critical quality attributes by Pareto charts provides the least capable and most variable process that is liable for improvement. Statistical process control thus proves to be an important tool for six sigma-capable process development and continuous quality improvement.

29 CFR 1910.1044 - 1,2-dibromo-3-chloropropane.

Code of Federal Regulations, 2014 CFR

2014-07-01

... containers, or failure of control equipment which may, or does, result in an unexpected release of DBCP. OSHA.... Whenever there has been a production, process, control, or personnel change which may result in any new or... work practice controls to reduce and maintain employee exposures to DBCP at or below the permissible...

40 CFR 1051.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.345 What production-line testing records must I send to EPA? (a.... We have not changed production processes or quality-control procedures for test engines (or vehicles...

40 CFR 1051.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.345 What production-line testing records must I send to EPA? (a.... We have not changed production processes or quality-control procedures for test engines (or vehicles...

40 CFR 1051.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.345 What production-line testing records must I send to EPA? (a.... We have not changed production processes or quality-control procedures for test engines (or vehicles...

40 CFR 1051.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.345 What production-line testing records must I send to EPA? (a.... We have not changed production processes or quality-control procedures for test engines (or vehicles...

40 CFR 1051.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.345 What production-line testing records must I send to EPA? (a.... We have not changed production processes or quality-control procedures for test engines (or vehicles...

Parental Control in Latino Families: An Integrated Review of the Literature

ERIC Educational Resources Information Center

Halgunseth, Linda C.; Ispa, Jean M.; Rudy, Duane

2006-01-01

Using social information processing and cultural change models as explanatory frameworks, this article reviews the literature on Latino parental control and its implications for child development. It is argued that the use of parental control in Latino families may have motivational roots in cultural childrearing goals such as "familismo"…

Cognitive Effects of Bilingualism: How Linguistic Experience Leads to Cognitive Change

ERIC Educational Resources Information Center

Bialystok, Ellen

2007-01-01

Bilinguals must have a mechanism for controlling attention to their two language systems in order to achieve fluent performance in each language without intrusions from the other. This paper examines the evidence that the experience of controlling attention to two languages boosts the development of executive control processes in childhood for…

Statistical process control using optimized neural networks: a case study.

PubMed

Addeh, Jalil; Ebrahimzadeh, Ata; Azarbad, Milad; Ranaee, Vahid

2014-09-01

The most common statistical process control (SPC) tools employed for monitoring process changes are control charts. A control chart demonstrates that the process has altered by generating an out-of-control signal. This study investigates the design of an accurate system for the control chart patterns (CCPs) recognition in two aspects. First, an efficient system is introduced that includes two main modules: feature extraction module and classifier module. In the feature extraction module, a proper set of shape features and statistical feature are proposed as the efficient characteristics of the patterns. In the classifier module, several neural networks, such as multilayer perceptron, probabilistic neural network and radial basis function are investigated. Based on an experimental study, the best classifier is chosen in order to recognize the CCPs. Second, a hybrid heuristic recognition system is introduced based on cuckoo optimization algorithm (COA) algorithm to improve the generalization performance of the classifier. The simulation results show that the proposed algorithm has high recognition accuracy. Copyright © 2013 ISA. Published by Elsevier Ltd. All rights reserved.

Modeling the effect of land use change on hydrology of a forested watershed in coastal South Carolina.

Treesearch

Zhaohua Dai; Devendra M. Amatya; Ge Sun; Changsheng Li; Carl C. Trettin; Harbin Li

2009-01-01

Since hydrology is one of main factors controlling wetland functions, hydrologic models are useful for evaluating the effects of land use change on we land ecosystems. We evaluated two process-based hydrologic models with...

Cardiovascular Aspects of Aging (Part 1 of 2).

ERIC Educational Resources Information Center

Van Camp, Steven P.; Boyer, John L.

1989-01-01

Reviews cardiovascular changes occurring during the aging process and the trainability of older persons. Although cardiovascular changes are part of life, activity levels need not decrease. Beneficial aspects of exercise include improvements in muscle strength, joint mobility, flexibility, coordination, and weight control. (SM)

Spacelab Mission Implementation Cost Assessment (SMICA)

NASA Technical Reports Server (NTRS)

Guynes, B. V.

1984-01-01

A total savings of approximately 20 percent is attainable if: (1) mission management and ground processing schedules are compressed; (2) the equipping, staffing, and operating of the Payload Operations Control Center is revised, and (3) methods of working with experiment developers are changed. The development of a new mission implementation technique, which includes mission definition, experiment development, and mission integration/operations, is examined. The Payload Operations Control Center is to relocate and utilize new computer equipment to produce cost savings. Methods of reducing costs by minimizing the Spacelab and payload processing time during pre- and post-mission operation at KSC are analyzed. The changes required to reduce costs in the analytical integration process are studied. The influence of time, requirements accountability, and risk on costs is discussed. Recommendation for cost reductions developed by the Spacelab Mission Implementation Cost Assessment study are listed.

Benefits from an autobiographical memory facilitation programme in relapsing-remitting multiple sclerosis patients: a clinical and neuroimaging study.

PubMed

Ernst, Alexandra; Sourty, Marion; Roquet, Daniel; Noblet, Vincent; Gounot, Daniel; Blanc, Frédéric; de Seze, Jérôme; Manning, Liliann

2016-10-09

While the efficacy of mental visual imagery (MVI) to alleviate autobiographical memory (AM) impairment in multiple sclerosis (MS) patients has been documented, nothing is known about the brain changes sustaining that improvement. To explore this issue, 20 relapsing-remitting MS patients showing AM impairment were randomly assigned to two groups, experimental (n = 10), who underwent the MVI programme, and control (n = 10), who followed a sham verbal programme. Besides the stringent AM assessment, the patients underwent structural and functional MRI sessions, consisting in retrieving personal memories, within a pre-/post-facilitation study design. Only the experimental group showed a significant AM improvement in post-facilitation, accompanied by changes in brain activation (medial and lateral frontal regions), functional connectivity (posterior brain regions), and grey matter volume (parahippocampal gyrus). Minor activations and functional connectivity changes were observed in the control group. The MVI programme improved AM in MS patients leading to functional and structural changes reflecting (1) an increase reliance on brain regions sustaining a self-referential process; (2) a decrease of those reflecting an effortful research process; and (3) better use of neural resources in brain regions sustaining MVI. Functional changes reported in the control group likely reflected ineffective attempts to use the sham strategy in AM.

Perspectives on Arms Control

DTIC Science & Technology

2004-07-01

perspective. He traces the important and integral place of arms control diplomacy to United States traditions, and projects continuing relevance for... The second is commonality surrounding the ongoing arms control process on nuclear weapons and missiles between America and Russia that needs...summits were built around arms control discussions, large delegations met frequently in places like Geneva, and even trivial changes in the arms

Effect of gamma irradiation on high temperature hardness of low-density polyethylene

NASA Astrophysics Data System (ADS)

Chen, Pei-Yun; Yang, Fuqian; Lee, Sanboh

2015-11-01

Gamma irradiation can cause the change of microstructure and molecular structure of polymer, resulting in the change of mechanical properties of polymers. Using the hardness measurement, the effect of gamma irradiation on the high temperature hardness of low-density polyethylene (LDPE) was investigated. The gamma irradiation caused the increase in the melting point, the enthalpy of fusion, and the portion of crystallinity of LDPE. The Vickers hardness of the irradiated LDPE increases with increasing the irradiation dose, annealing temperature, and annealing time. The activation energy for the rate process controlling the reaction between defects linearly decreases with the irradiation dose. The process controlling the hardness evolution in LDPE is endothermic because LDPE is semi-crystalline.

SURVIAC Bulletin: Materials Flammability in Spacecraft, Volume 25 - Issue 1

DTIC Science & Technology

2009-01-01

and debris exiting the barrel of handguns is shown in the following example. Th is demonstrates the speed of the image processing algorithms to...gravity. Additionally, materials do not burn the same way. For example, when a candle burns on Earth, the hot gases from the fl ame rise, creating...cal. Th e controlling mechanisms of the combustion process change so that fi re prevention and material fl ammability considerations also change

Analytical design of an industrial two-term controller for optimal regulatory control of open-loop unstable processes under operational constraints.

PubMed

Tchamna, Rodrigue; Lee, Moonyong

2018-01-01

This paper proposes a novel optimization-based approach for the design of an industrial two-term proportional-integral (PI) controller for the optimal regulatory control of unstable processes subjected to three common operational constraints related to the process variable, manipulated variable and its rate of change. To derive analytical design relations, the constrained optimal control problem in the time domain was transformed into an unconstrained optimization problem in a new parameter space via an effective parameterization. The resulting optimal PI controller has been verified to yield optimal performance and stability of an open-loop unstable first-order process under operational constraints. The proposed analytical design method explicitly takes into account the operational constraints in the controller design stage and also provides useful insights into the optimal controller design. Practical procedures for designing optimal PI parameters and a feasible constraint set exclusive of complex optimization steps are also proposed. The proposed controller was compared with several other PI controllers to illustrate its performance. The robustness of the proposed controller against plant-model mismatch has also been investigated. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Thermal Changes During Guided Flapless Implant Site Preparation: A Comparative Study.

PubMed

Sannino, Gianpaolo; Gherlone, Enrico F

To compare intrabony thermal changes induced by two different protocols for guided implant surgery during the whole drilling procedure. Two protocols for guided implant placement were evaluated in vitro using artificial bone cylinders. The control protocol provided traditional metal sleeves and a standard drilling sequence composed of four cylindrical triflute drills (cutting surface length = 16 mm). The test protocol provided a three-slot polyurethane sleeve and two cylindrical drills (second drill cutting surface length = 4 mm). Forty automated intermittent and graduated osteotomies (depth = 14 mm) were performed under external irrigation. Temperatures were measured in real time by three sensors at different depths (2, 8, and 13 mm). The temperature changes generated by the final drill of each protocol during the shearing and withdrawing processes were recorded as experimental results and subjected to the Student t test. Maximum temperature increases were recorded during the process of withdrawing in both protocols. In the control group, the mean thermal changes were 10.18°C, 8.61°C, and 5.78°C at depths of 2, 8, and 13 mm, respectively. In the test group, the mean thermal changes were 1.44°C, 4.46°C, and 3.58°C at depths of 2, 8, and 13 mm, respectively. The control group revealed statistically significantly (P < .0001) higher thermal changes than the test group, both in the superficial and deeper bone areas. An appropriate irrigation system could be crucial for thermal lowering during a guided implant osteotomy mainly in the coronal and middle third of the implant site. Copious irrigation should be provided during the withdrawing process since greater thermal increases could be expected. Lower temperature increases could be achieved, reducing drill-to-bone contact, ie, cutting surface length, due to short frictional force exposure.

From Hills to Holes: How Climate Change and Mining are Altering Runoff Processes in Canada

NASA Astrophysics Data System (ADS)

Carey, S. K.

2015-12-01

Canadian environments are under considerable pressure from both climate and land-use change. While warming temperatures are widespread and amplified in the north, surface mining has resulted in large-scale landscape disturbance. How these changes affect catchment response is profound, fundamentally altering the cycling and delivery of water and geochemicals to the drainage network. In permafrost-underlain environments, coupled mass and energy processes control runoff response, and as ground thaw increases, new subsurface pathways become accessible while changing overall catchment storage. With surface mining, watersheds are altered such that they bare little resemblance to what existed prior to mining. In this presentation, data will be presented from long-term experiments exploring the impact of climate and mining on runoff processes in cold catchments using stable isotopes of water and associated hydrometric measurements. In southern Yukon, results from the Wolf Creek Research Basin highlights the influence of surface energy balances on controlling the timing and magnitude of flow response, with inter-annual variability largely driven by how atmospheric forcing interacts with permafrost-underlain areas of the catchment. In mountainous areas of southern British Columbia, surface mining reconfigures landscapes as valleys are filled with waste-rock. Mine-influenced catchments exhibit attenuated flows with delays in spring freshet and a more muted to precipitation. Stable isotopes in stream water suggests that both waste-rock and reference catchments are well mixed, however reference catchments are more responsive to enrichment and depletion events and that mine-influenced catchments had a heavier isotope signature than reference watersheds, suggesting enhanced influence of rainfall on recharge. In both cases, snow storage and release exerts considerable control on streamflow responses, and future changes in streamflow regimes will reflect both a changes in the snow regime and inherent catchment storage properties that are dynamic with time.

Designing forward with an eye to the past: Morphogenesis of the lower Yuba River

NASA Astrophysics Data System (ADS)

James, L. Allan

2015-12-01

The early geomorphic evolution of the lower Yuba River (LYR), northern California, up to 1906 is reconstructed using cartographic, documentary, topographic, and stratigraphic evidence. The importance of early river mining is identified along with rates and patterns of floodplain aggradation and channel incision at the turn of the 20th century. The LYR is a classic example of anthropogeomorphic transformation of a river by episodic hydraulic mining sedimentation. This was followed by channelization, damming, dredging, and other engineering works to redirect, contain, and stabilize channels. These geomorphic changes and engineering controls continue to govern channel and floodplain form and process, control the trajectory of river responses, and constrain flood control, water quality, and aquatic ecosystem management options. Returning a river system to a prior condition should not be the primary goal of river rehabilitation projects, especially if hydrologic inputs have substantially changed. Reconstructing former conditions may be impractical and unsustainable under modern circumstances. Instead, fluvial systems should be designed and managed for present inputs and processes while anticipating future conditions. Rapid changes in land use and climate that generate changes in runoff and sediment loadings are likely to generate morphological instability, and these changes should be considered in the design and management of fluvial systems. The past geomorphic evolution of fluvial systems should also be considered in design and management decisions to recognize trajectories and suppressed tendencies. Recognition of trends and system vulnerabilities may avoid potential blunders, such as removing critical stabilizing works. Complex causalities may be difficult to reconstruct from geomorphic form alone, however, due to process-form dynamics. Detailed research on the geomorphic and engineering history of a river is essential, therefore, if substantial changes and morphologic instabilities have occurred.

Orbital frontal cortex updates state-induced value change for decision-making.

PubMed

Baltz, Emily T; Yalcinbas, Ege A; Renteria, Rafael; Gremel, Christina M

2018-06-13

Recent hypotheses have posited that orbital frontal cortex (OFC) is important for using inferred consequences to guide behavior. Less clear is OFC's contribution to goal-directed or model-based behavior, where the decision to act is controlled by previous experience with the consequence or outcome. Investigating OFC's role in learning about changed outcomes separate from decision-making is not trivial and often the two are confounded. Here we adapted an incentive learning task to mice, where we investigated processes controlling experience-based outcome updating independent from inferred action control. We found chemogenetic OFC attenuation did not alter the ability to perceive motivational state-induced changes in outcome value but did prevent the experience-based updating of this change. Optogenetic inhibition of OFC excitatory neuron activity selectively when experiencing an outcome change disrupted the ability to update, leaving mice unable to infer the appropriate behavior. Our findings support a role for OFC in learning that controls decision-making. © 2018, Baltz et al.

Purchasing power: business and health policy change in Massachusetts.

PubMed

Bergthold, L A

1988-01-01

As in many states around the country, health care costs in Massachusetts had risen to an unprecedented proportion of the state budget by the early 1980s. State health policymakers realized that dramatic changes were needed in the political process to break provider control over health policy decisions. This paper presents a case study of policy change in Massachusetts between 1982 and 1988. State officials formulated a strategy to mobilize corporate interests, which were already awakening to the problems of high health care costs, as a countervailing power to the political monopoly of provider interests. Once mobilized, business interests became organized politically and even became dominant at times, controlling both the policy agenda and its process. Ultimately, business came to be viewed as a permanent part of the coalitions and commissions that helped formulate state health policy. Although initially allied with provider interests, business eventually forged a stronger alliance with the state, an alliance that has the potential to force structural change in health care politics in Massachusetts for years to come. The paper raises questions about the consequences of such alliances between public and private power for both the content and the process of health policymaking at the state level.

Dialectic of control and emancipation in organizing for social change: a multitheoretic study of the Grameen Bank in Bangladesh.

PubMed

Papa, M J; Auwal, M A; Singhal, A

1995-08-01

Dedicated to helping the poorest of the poor obtain the financial means to become productively self-employed, the Grameen Bank in Bangladesh is founded upon the belief that credit is a fundamental human right and that development should be measured according to the per capita income of the bottom 50% of the population. The bank provides collateral-free loans and social services for the poor, charging 20% interest on capital, all the while maintaining a 99% loan recovery rate. The bank has 1.9 million members, 94% of whom are women, and has successfully organized grassroots microenterprises for productive self-employment and social change. The authors use the coorientation, concertive control, and critical feminist theories to analyze the bank's programs in an effort to explain the dialectic between control and emancipation in organizing for social change. Examining the bank's organizational processes from multiple theoretical perspectives allows insights to be drawn about theory and praxis in organizing for social change. The Grameen Bank has effectively demonstrated that development is an organized process of education, environmentally sound productivity, and improvement in the quality of life for the poorest of the poor.

Enhancing long-term memory with stimulation tunes visual attention in one trial.

PubMed

Reinhart, Robert M G; Woodman, Geoffrey F

2015-01-13

Scientists have long proposed that memory representations control the mechanisms of attention that focus processing on the task-relevant objects in our visual field. Modern theories specifically propose that we rely on working memory to store the object representations that provide top-down control over attentional selection. Here, we show that the tuning of perceptual attention can be sharply accelerated after 20 min of noninvasive brain stimulation over medial-frontal cortex. Contrary to prevailing theories of attention, these improvements did not appear to be caused by changes in the nature of the working memory representations of the search targets. Instead, improvements in attentional tuning were accompanied by changes in an electrophysiological signal hypothesized to index long-term memory. We found that this pattern of effects was reliably observed when we stimulated medial-frontal cortex, but when we stimulated posterior parietal cortex, we found that stimulation directly affected the perceptual processing of the search array elements, not the memory representations providing top-down control. Our findings appear to challenge dominant theories of attention by demonstrating that changes in the storage of target representations in long-term memory may underlie rapid changes in the efficiency with which humans can find targets in arrays of objects.

The RiverFish Approach to Business Process Modeling: Linking Business Steps to Control-Flow Patterns

NASA Astrophysics Data System (ADS)

Zuliane, Devanir; Oikawa, Marcio K.; Malkowski, Simon; Alcazar, José Perez; Ferreira, João Eduardo

Despite the recent advances in the area of Business Process Management (BPM), today’s business processes have largely been implemented without clearly defined conceptual modeling. This results in growing difficulties for identification, maintenance, and reuse of rules, processes, and control-flow patterns. To mitigate these problems in future implementations, we propose a new approach to business process modeling using conceptual schemas, which represent hierarchies of concepts for rules and processes shared among collaborating information systems. This methodology bridges the gap between conceptual model description and identification of actual control-flow patterns for workflow implementation. We identify modeling guidelines that are characterized by clear phase separation, step-by-step execution, and process building through diagrams and tables. The separation of business process modeling in seven mutually exclusive phases clearly delimits information technology from business expertise. The sequential execution of these phases leads to the step-by-step creation of complex control-flow graphs. The process model is refined through intuitive table and diagram generation in each phase. Not only does the rigorous application of our modeling framework minimize the impact of rule and process changes, but it also facilitates the identification and maintenance of control-flow patterns in BPM-based information system architectures.

Calculation of the ELISA's cut-off based on the change-point analysis method for detection of Trypanosoma cruzi infection in Bolivian dogs in the absence of controls.

PubMed

Lardeux, Frédéric; Torrico, Gino; Aliaga, Claudia

2016-07-04

In ELISAs, sera of individuals infected by Trypanosoma cruzi show absorbance values above a cut-off value. The cut-off is generally computed by means of formulas that need absorbance readings of negative (and sometimes positive) controls, which are included in the titer plates amongst the unknown samples. When no controls are available, other techniques should be employed such as change-point analysis. The method was applied to Bolivian dog sera processed by ELISA to diagnose T. cruzi infection. In each titer plate, the change-point analysis estimated a step point which correctly discriminated among known positive and known negative sera, unlike some of the six usual cut-off formulas tested. To analyse the ELISAs results, the change-point method was as good as the usual cut-off formula of the form "mean + 3 standard deviation of negative controls". Change-point analysis is therefore an efficient alternative method to analyse ELISA absorbance values when no controls are available.

Industrial hygiene walk-through survey report of E. I. Dupont de Nemours and Company, Inc. , Chocolate Bayou Plant, Alvin, Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fajen, J.M.

1985-05-01

A walkthrough survey of EI duPont deNemours and Company, Incorporated, Alvin, Texas was conducted in November, 1984. The purpose of the survey was to obtain information on the 1,3-butadiene monomer manufacturing process and the potential for exposure. The facility manufactured a crude product stream containing 1,3-butadiene as a coproduct of its ethylene process. The crude was refined to a 99.5% 1,3-butadiene product. The refining process occurred in a closed system, tightly maintained for economic, fire, and health-hazard reasons. The product was transferred by way of a pipeline to storage spheres for later transport off site. The facility used an open-loopmore » cylinder (bomb) technique for quality control sampling. All pumps were equipped with single mechanical seals, which were in the process of being replaced by tandem seals. Since 1962, the facility had experienced process changes and three changes of ownership. Because of these changes, records from previous owners of industrial hygiene monitoring were not available. Job titles identified as having potential exposure were processors, wage employee supervisors, production engineers, and laboratory technicians. The author concludes that a closed-loop manual quality-control sampling system should be installed to reduce exposure from this source.« less

"Walking" through the sensory, cognitive, and temporal degradations of healthy aging.

PubMed

Paraskevoudi, Nadia; Balcı, Fuat; Vatakis, Argiro

2018-05-09

As we age, there is a wide range of changes in motor, sensory, cognitive, and temporal processing due to alterations in the functioning of the central nervous and musculoskeletal systems. Specifically, aging is associated with degradations in gait; altered processing of the individual sensory systems; modifications in executive control, memory, and attention; and changes in temporal processing. These age-related alterations are often inter-related and have been suggested to result from shared neural substrates. Additionally, the overlap between these brain areas and those controlling walking raises the possibility of facilitating performance in several tasks by introducing protocols that can efficiently target all four domains. Attempts to counteract these negative effects of normal aging have been focusing on research to prevent falls and/or enhance cognitive processes, while ignoring the potential multisensory benefits accompanying old age. Research shows that the aging brain tends to increasingly rely on multisensory integration to compensate for degradations in individual sensory systems and for altered neural functioning. This review covers the age-related changes in the above-mentioned domains and the potential to exploit the benefits associated with multisensory integration in aging so as to improve one's mobility and enhance sensory, cognitive, and temporal processing. © 2018 New York Academy of Sciences.

Exploratory 7-Tesla magnetic resonance spectroscopy in Huntington's disease provides in vivo evidence for impaired energy metabolism.

PubMed

van den Bogaard, Simon J A; Dumas, Eve M; Teeuwisse, Wouter M; Kan, Hermien E; Webb, Andrew; Roos, Raymund A C; van der Grond, Jeroen

2011-12-01

Huntington's disease (HD) is a neurodegenerative genetic disorder that affects the brain. Atrophy of deep grey matter structures has been reported and it is likely that underlying pathologic processes occur before, or in concurrence with, volumetric changes. Measurement of metabolite concentrations in these brain structures has the potential to provide insight into pathological processes. We aim to gain understanding of metabolite changes with respect to the disease stage and pathophysiological changes. We studied five brain regions using magnetic resonance spectroscopy (MRS) using a 7-Tesla MRI scanner. Localized proton spectra were acquired to obtain six metabolite concentrations. MRS was performed in the caudate nucleus, putamen, thalamus, hypothalamus, and frontal lobe in 44 control subjects, premanifest gene carriers and manifest HD. In the caudate nucleus, HD patients display lower NAA (p = 0.009) and lower creatine concentration (p = 0.001) as compared to controls. In the putamen, manifest HD patients show lower NAA (p = 0.024), lower creatine concentration (p = 0.027), and lower glutamate (p = 0.013). Although absolute values of NAA, creatine, and glutamate were lower, no significant differences to controls were found in the premanifest gene carriers. The lower concentrations of NAA and creatine in the caudate nucleus and putamen of early manifest HD suggest deficits in neuronal integrity and energy metabolism. The changes in glutamate could support the excitotoxicity theory. These findings not only give insight into neuropathological changes in HD but also indicate that MRS can possibly be applied in future clinical trails to evaluate medication targeted at specific metabolic processes.

Self-determination, control, and reactions to changes in workload: a work simulation.

PubMed

Parker, Stacey L; Jimmieson, Nerina L; Amiot, Catherine E

2013-04-01

The objective of this experimental study is to capture the dynamic temporal processes that occur in changing work settings and to test how work control and individuals' motivational predispositions interact to predict reactions to these changes. To this aim, we examine the moderating effects of global self-determined and non-self-determined motivation, at different levels of work control, on participants' adaptation and stress reactivity to changes in workload during four trials of an inbox activity. Workload was increased or decreased at Trial 3, and adaptation to this change was examined via fluctuations in anxiety, coping, motivation, and performance. In support of the hypotheses, results revealed that, for non-self-determined individuals, low work control was stress-buffering and high work control was stress-exacerbating when predicting anxiety and intrinsic motivation. In contrast, for self-determined individuals, high work control facilitated the adaptive use of planning coping in response to a change in workload. Overall, this pattern of results demonstrates that, while high work control was anxiety-provoking and demotivating for non-self-determined individuals, self-determined individuals used high work control to implement an adaptive antecedent-focused emotion regulation strategy (i.e., planning coping) to meet situational demands. Other interactive effects of global motivation emerged on anxiety, active coping, and task performance. These results and their practical implications are discussed.

Characterization of typical heavy metals in pyrolysis MSWI fly ash.

PubMed

Xu, Tengtun; Wang, Li'ao; Zeng, Yunmin; Zhao, Xue; Wang, Lei; Zhan, Xinyuan; Li, Tong; Yang, Lu

2018-06-07

Thermal treatment methods are used extensively in the process of municipal solid waste incineration fly ash. However, the characterization of heavy metals during this process should be understood more clearly in order to control secondary pollution. In this paper, the content, speciation and leaching toxicity of mercury (Hg), plumbum (Pb), cadmium (Cd) and zinc (Zn) in fly ash treated under different temperatures and time were firstly analysed as pre-tests. Later, pilot-scale pyrolysis equipment was used to explore the concentration and speciation changes in the heavy metals of fly ash. Finally, the phase constitution and microstructure changes in fly ash were compared before and after pyrolysis using X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. The results showed that (a) The appropriate processing temperature was between 400°C and 450°C, and the processing time should be 1 h. (b) The stability of heavy metals in fly ash increased after pyrolysis. (c) XRD and SEM results indicated that phase constitution changed a little, but the microstructure varied to a porous structure similar to that of a coral reef after pyrolysis. These results suggest that pyrolysis could be an effective method in controlling heavy metal pollution in fly ash.

Acceptance and Commitment Therapy for chronic pain: A diary study of treatment process in relation to reliable change in disability

PubMed Central

Vowles, Kevin E.; Fink, Brandi C.; Cohen, Lindsey L.

2016-01-01

In chronic pain treatment, a primary goal is reduced disability. It is often assumed that a central process by which disability reduction occurs is pain reduction. Conversely, approaches such as Acceptance and Commitment Therapy (ACT) posit that pain reduction is not necessary for reduced disability. Instead, disability reduction occurs when responses to pain are changed, such that as unsuccessful struggles for pain control decreases and engagement in personally-valued activities increases. Treatment outcome studies have supported ACT’s effectiveness; however, less work has examined how within-treatment patterns of change relate to treatment success or failure (i.e., decreased or sustained disability). The present study, therefore, sought to examine this issue. Specifically, struggles for pain control and engagement in valued activities were recorded weekly in 21 patients who completed a four week interdisciplinary ACT intervention for chronic pain. It was hypothesized that the presence or absence of reliable change in disability at a three month follow-up would be predicted by within treatment patterns of change in the weekly data. At follow-up, 47.6% of patients evidenced reliable disability reduction. The expected pattern of change occurred in 81.0% of patients–specifically, when pain control attempts decreased and engagement in valued activities increased, reliably reduced disability typically occurred, while the absence of this pattern was typically associated with a lack of reliable change. Further, changes in pain intensity, also assessed weekly, were unrelated to reliable change. Overall, these results provide additional support for the ACT model and further suggest some possible requirements for treatment success. PMID:27818931

Chang'E-3 data pre-processing system based on scientific workflow

NASA Astrophysics Data System (ADS)

tan, xu; liu, jianjun; wang, yuanyuan; yan, wei; zhang, xiaoxia; li, chunlai

2016-04-01

The Chang'E-3(CE3) mission have obtained a huge amount of lunar scientific data. Data pre-processing is an important segment of CE3 ground research and application system. With a dramatic increase in the demand of data research and application, Chang'E-3 data pre-processing system(CEDPS) based on scientific workflow is proposed for the purpose of making scientists more flexible and productive by automating data-driven. The system should allow the planning, conduct and control of the data processing procedure with the following possibilities: • describe a data processing task, include:1)define input data/output data, 2)define the data relationship, 3)define the sequence of tasks,4)define the communication between tasks,5)define mathematical formula, 6)define the relationship between task and data. • automatic processing of tasks. Accordingly, Describing a task is the key point whether the system is flexible. We design a workflow designer which is a visual environment for capturing processes as workflows, the three-level model for the workflow designer is discussed:1) The data relationship is established through product tree.2)The process model is constructed based on directed acyclic graph(DAG). Especially, a set of process workflow constructs, including Sequence, Loop, Merge, Fork are compositional one with another.3)To reduce the modeling complexity of the mathematical formulas using DAG, semantic modeling based on MathML is approached. On top of that, we will present how processed the CE3 data with CEDPS.

Intelligent sensor-model automated control of PMR-15 autoclave processing

NASA Technical Reports Server (NTRS)

Hart, S.; Kranbuehl, D.; Loos, A.; Hinds, B.; Koury, J.

1992-01-01

An intelligent sensor model system has been built and used for automated control of the PMR-15 cure process in the autoclave. The system uses frequency-dependent FM sensing (FDEMS), the Loos processing model, and the Air Force QPAL intelligent software shell. The Loos model is used to predict and optimize the cure process including the time-temperature dependence of the extent of reaction, flow, and part consolidation. The FDEMS sensing system in turn monitors, in situ, the removal of solvent, changes in the viscosity, reaction advancement and cure completion in the mold continuously throughout the processing cycle. The sensor information is compared with the optimum processing conditions from the model. The QPAL composite cure control system allows comparison of the sensor monitoring with the model predictions to be broken down into a series of discrete steps and provides a language for making decisions on what to do next regarding time-temperature and pressure.

Myoelectric signal processing for control of powered limb prostheses.

PubMed

Parker, P; Englehart, K; Hudgins, B

2006-12-01

Progress in myoelectric control technology has over the years been incremental, due in part to the alternating focus of the R&D between control methodology and device hardware. The technology has over the past 50 years or so moved from single muscle control of a single prosthesis function to muscle group activity control of multifunction prostheses. Central to these changes have been developments in the means of extracting information from the myoelectric signal. This paper gives an overview of the myoelectric signal processing challenge, a brief look at the challenge from an historical perspective, the state-of-the-art in myoelectric signal processing for prosthesis control, and an indication of where this field is heading. The paper demonstrates that considerable progress has been made in providing clients with useful and reliable myoelectric communication channels, and that exciting work and developments are on the horizon.

The Evolution of Marketing in Education.

ERIC Educational Resources Information Center

Knight, Brent

1982-01-01

Looks at the progression of educational institutions through the five stages of Kotler's marketing process. Identifies anticipated changes and three activities critical for meeting the marketing challenge: research to predict consumer habits, attitudes, and needs; material and research development changes; and strict quality control and relevance…

Using statistical process control methods to trace small changes in perinatal mortality after a training program in a low-resource setting.

PubMed

Mduma, Estomih R; Ersdal, Hege; Kvaloy, Jan Terje; Svensen, Erling; Mdoe, Paschal; Perlman, Jeffrey; Kidanto, Hussein Lessio; Soreide, Eldar

2018-05-01

To trace and document smaller changes in perinatal survival over time. Prospective observational study, with retrospective analysis. Labor ward and operating theater at Haydom Lutheran Hospital in rural north-central Tanzania. All women giving birth and birth attendants. Helping Babies Breathe (HBB) simulation training on newborn care and resuscitation and some other efforts to improve perinatal outcome. Perinatal survival, including fresh stillbirths and early (24-h) newborn survival. The variable life-adjusted plot and cumulative sum chart revealed a steady improvement in survival over time, after the baseline period. There were some variations throughout the study period, and some of these could be linked to different interventions and events. To our knowledge, this is the first time statistical process control methods have been used to document changes in perinatal mortality over time in a rural Sub-Saharan hospital, showing a steady increase in survival. These methods can be utilized to continuously monitor and describe changes in patient outcomes.

Cryo-conditioned rocky coast systems: A case study from Wilczekodden, Svalbard.

PubMed

Strzelecki, M C; Kasprzak, M; Lim, M; Swirad, Z M; Jaskólski, M; Pawłowski, Ł; Modzel, P

2017-12-31

This paper presents the results of an investigation into the processes controlling development of a cryo-conditioned rock coast system in Hornsund, Svalbard. A suite of nested geomorphological and geophysical methods have been applied to characterise the functioning of rock cliffs and shore platforms influenced by lithological control and geomorphic processes driven by polar coast environments. Electrical resistivity tomography (ERT) surveys have been used to investigate permafrost control on rock coast dynamics and reveal the strong interaction with marine processes in High Arctic coastal settings. Schmidt hammer rock tests, demonstrated strong spatial control on the degree of rock weathering (rock strength) along High Arctic rock coasts. Elevation controlled geomorphic zones are identified and linked to distinct processes and mechanisms, transitioning from peak hardness values at the ice foot through the wave and storm dominated scour zones to the lowest values on the cliff tops, where the effects of periglacial weathering dominate. Observations of rock surface change using a traversing micro-erosion meter (TMEM) indicate that significant changes in erosion rates occur at the junction between the shore platform and the cliff toe, where rock erosion is facilitated by frequent wetting and drying and operation of nivation and sea ice processes (formation and melting of snow patches and icefoot complexes). The results are synthesised to propose a new conceptual model of High Arctic rock coast systems, with the aim of contributing towards a unifying concept of cold region landscape evolution and providing direction for future research regarding the state of polar rock coasts. Copyright © 2017 Elsevier B.V. All rights reserved.

Mechanisms controlling rock coast evolution in paraglacial landscapes - examples from Arctic, Antarctic and Scandinavian regions

NASA Astrophysics Data System (ADS)

Strzelecki, M. C.; Lim, M.; Kasprzek, M.; Swirad, Z. M.; Rachlewicz, G.; Migoń, P.; Pawlowski, L.; Jaskolski, M.

2017-12-01

This paper presents the results of an investigation into the processes controlling development of paraglacial rock coast systems in Hornsund, Svalbard, Admiralty Bay, South Shetland Islands and Gotland Island, Scandinavia. A suite of nested geomorphological and geophysical methods have been applied to characterize the functioning of rock cliffs, shore platforms and stacks influenced by lithological control and geomorphic processes driven by paraglacial coast environments - both in glaciated and deglaciated study sites. Rock hardness, quantified by Schmidt hammer rebound tests, demonstrate strong spatial control on the degree of rock weathering (rock strength) along studied rock coasts. Elevation controlled geomorphic zones are identified and linked to distinct processes and mechanisms, transitioning from peak hardness values at the icefoot/sea-ice through the wave and storm dominated scour zones to the lowest values on the cliff tops, where the effects of periglacial weathering dominate. Observations of rock surface change using a traversing micro-erosion meter (TMEM) indicate that significant changes in erosion rates occur at the junction between shore platform and the cliff toe, where rock erosion is facilitated by frequent wetting and drying and operation of nivation and sea ice processes (formation and melting of snow patches and icefoot complexes). Electrical resistivity tomography (ERT) surveys have been used to investigate frozen ground control on rock coast dynamics and reveal the strong interaction with marine processes in polar coastal settings. In Gotland, Scandinavia the morphology of rocky coastal landforms (rauks) bear traces of numerous environmental changes that occurred in Baltic region over the Holocene including salinity, temperature, ice-cover/storminess and relative sea-level. The results are synthesised to propose a new conceptual model of paraglacial rock coast systems, with the aim of contributing towards a unifying concept of cold region landscape evolution and providing direction for future research regarding the state of rock coasts in deglaciated regions. This is a contribution to National Science Centre projects: RAUK (2016/21/D/ST10/01976) and POROCO (UMO-2013/11/B/ST10/00283).

Stroop effects in persons with traumatic brain injury: selective attention, speed of processing, or color-naming? A meta-analysis.

PubMed

Ben-David, Boaz M; Nguyen, Linh L T; van Lieshout, Pascal H H M

2011-03-01

The color word Stroop test is the most common tool used to assess selective attention in persons with traumatic brain injury (TBI). A larger Stroop effect for TBI patients, as compared to controls, is generally interpreted as reflecting a decrease in selective attention. Alternatively, it has been suggested that this increase in Stroop effects is influenced by group differences in generalized speed of processing (SOP). The current study describes an overview and meta-analysis of 10 studies, where persons with TBI (N = 324) were compared to matched controls (N = 501) on the Stroop task. The findings confirmed that Stroop interference was significantly larger for TBI groups (p = .008). However, these differences may be strongly biased by TBI-related slowdown in generalized SOP (r² = .81 in a Brinley analysis). We also found that TBI-related changes in sensory processing may affect group differences. Mainly, a TBI-related increase in the latency difference between reading and naming the font color of a color-neutral word (r² = .96) was linked to Stroop effects. Our results suggest that, in using Stroop, it seems prudent to control for both sensory factors and SOP to differentiate potential changes in selective attention from other changes following TBI.

KSC-05pd2574

NASA Image and Video Library

2005-12-07

KENNEDY SPACE CENTER, FLA. -- In NASA Kennedy Space Center’s Orbiter Processing Facility Bay 1, installation of the forward reaction control system on Atlantis is complete. The control system fits just behind the nose cone and provides the thrust for attitude (rotational) maneuvers (pitch, yaw and roll) and for small velocity changes along the orbiter axis (translation maneuvers). Processing of Atlantis is under way for mission STS-115, the 19th flight to the International Space Station.

KSC-05pd2571

NASA Image and Video Library

2005-12-07

KENNEDY SPACE CENTER, FLA. -- In NASA Kennedy Space Center’s Orbiter Processing Facility Bay 1, workers are installing the forward reaction control system on Atlantis. The control system fits just behind the nose cone and provides the thrust for attitude (rotational) maneuvers (pitch, yaw and roll) and for small velocity changes along the orbiter axis (translation maneuvers). Processing of Atlantis is under way for mission STS-115, the 19th flight to the International Space Station.

KSC-05pd2570

NASA Image and Video Library

2005-12-07

KENNEDY SPACE CENTER, FLA. -- In NASA Kennedy Space Center’s Orbiter Processing Facility Bay 1, workers are installing the forward reaction control system on Atlantis. The control system fits just behind the nose cone and provides the thrust for attitude (rotational) maneuvers (pitch, yaw and roll) and for small velocity changes along the orbiter axis (translation maneuvers). Processing of Atlantis is under way for mission STS-115, the 19th flight to the International Space Station.

One Way of Testing a Distributed Processor

NASA Technical Reports Server (NTRS)

Edstrom, R.; Kleckner, D.

1982-01-01

Launch processing for Space Shuttle is checked out, controlled, and monitored with new system. Entire system can be exercised by two computer programs--one in master console and other in each of operations consoles. Control program in each operations console detects change in status and begins task initiation. All of front-end processors are exercised from consoles through common data buffer, and all data are logged to processed-data recorder for posttest analysis.

Which Measures of Online Control Are Least Sensitive to Offline Processes?

PubMed

de Grosbois, John; Tremblay, Luc

2018-02-28

A major challenge to the measurement of online control is the contamination by offline, planning-based processes. The current study examined the sensitivity of four measures of online control to offline changes in reaching performance induced by prism adaptation and terminal feedback. These measures included the squared Z scores (Z 2 ) of correlations of limb position at 75% movement time versus movement end, variable error, time after peak velocity, and a frequency-domain analysis (pPower). The results indicated that variable error and time after peak velocity were sensitive to the prism adaptation. Furthermore, only the Z 2 values were biased by the terminal feedback. Ultimately, the current study has demonstrated the sensitivity of limb kinematic measures to offline control processes and that pPower analyses may yield the most suitable measure of online control.

Maintaining Perceived Control with Unemployment Facilitates Future Adjustment

PubMed Central

Infurna, Frank J.; Gerstorf, Denis; Ram, Nilam; Schupp, Jürgen; Wagner, Gert G.; Heckhausen, Jutta

2016-01-01

Unemployment is a major challenge to individuals' development. An important personal resource to ameliorate the negative impact of unemployment may be perceived control, a general-purpose belief system. Little is known, however, about how perceived control itself changes with the experience of unemployment and what the antecedents, correlates, and consequences of such change in perceived control are in different ages. We use data from the German Socio-Economic Panel Study (N = 413 who experienced unemployment and N = 413 case-matched controls; time period of data collection: 1994 – 1996) to examine whether perceived control changes with unemployment, explore the role of socio-demographic, psychosocial and health factors in moderating such change, and investigate whether levels of perceived control prior to unemployment and unemployment-related change in perceived control predict unemployment-related outcomes up to five years following. Results indicated that, on average, perceived control remained relatively stable with unemployment, and that younger and older workers did not differ in this regard. However, there were sizeable individual differences in change in perceived control, with women and those with fewer years of education experiencing greater unemployment-related declines in perceived control. Lower levels of perceived control prior to unemployment and steeper unemployment-related decrements in perceived control were each associated with a higher risk of remaining unemployed in the 12 months immediately following unemployment. Steeper unemployment-related declines in perceived control also predicted lower life satisfaction up to five years following. We discuss possible pathways by which perceived control may facilitate adjustment to unemployment, consider the role of perceived control for better understanding the dynamics of unemployment, and suggest routes for further more process-oriented inquiry. PMID:26924845

Engineered containment and control systems: nurturing nature.

PubMed

Clarke, James H; MacDonell, Margaret M; Smith, Ellen D; Dunn, R Jeffrey; Waugh, W Jody

2004-06-01

The development of engineered containment and control systems for contaminated sites must consider the environmental setting of each site. The behaviors of both contaminated materials and engineered systems are affected by environmental conditions that will continue to evolve over time as a result of such natural processes as climate change, ecological succession, pedogenesis, and landform changes. Understanding these processes is crucial to designing, implementing, and maintaining effective systems for sustained health and environmental protection. Traditional engineered systems such as landfill liners and caps are designed to resist natural processes rather than working with them. These systems cannot be expected to provide long-term isolation without continued maintenance. In some cases, full-scale replacement and remediation may be required within 50 years, at an effort and cost much higher than for the original cleanup. Approaches are being developed to define smarter containment and control systems for stewardship sites, considering lessons learned from implementing prescriptive waste disposal regulations enacted since the 1970s. These approaches more effectively involve integrating natural and engineered systems; enhancing sensors and predictive tools for evaluating performance; and incorporating information on failure events, including precursors and consequences, into system design and maintenance. An important feature is using natural analogs to predict environmental conditions and system responses over the long term, to accommodate environmental change in the design process, and, as possible, to engineer containment systems that mimic favorable natural systems. The key emphasis is harmony with the environment, so systems will work with and rely on natural processes rather than resisting them. Implementing these new integrated systems will reduce current requirements for active management, which are resource-intensive and expensive.

Modeling Elevation and Aspect Controls on Emerging Ecohydrologic Processes and Ecosystem Patterns Using the Component-based Landlab Framework

NASA Astrophysics Data System (ADS)

Nudurupati, S. S.; Istanbulluoglu, E.; Adams, J. M.; Hobley, D. E. J.; Gasparini, N. M.; Tucker, G. E.; Hutton, E. W. H.

2014-12-01

Topography plays a commanding role on the organization of ecohydrologic processes and resulting vegetation patterns. In southwestern United States, climate conditions lead to terrain aspect- and elevation-controlled ecosystems, with mesic north-facing and xeric south-facing vegetation types; and changes in biodiversity as a function of elevation from shrublands in low desert elevations, to mixed grass/shrublands in mid elevations, and forests at high elevations and ridge tops. These observed patterns have been attributed to differences in topography-mediated local soil moisture availability, micro-climatology, and life history processes of plants that control chances of plant establishment and survival. While ecohydrologic models represent local vegetation dynamics in sufficient detail up to sub-hourly time scales, plant life history and competition for space and resources has not been adequately represented in models. In this study we develop an ecohydrologic cellular automata model within the Landlab component-based modeling framework. This model couples local vegetation dynamics (biomass production, death) and plant establishment and competition processes for resources and space. This model is used to study the vegetation organization in a semiarid New Mexico catchment where elevation and hillslope aspect play a defining role on plant types. Processes that lead to observed plant types across the landscape are examined by initializing the domain with randomly assigned plant types and systematically changing model parameters that couple plant response with soil moisture dynamics. Climate perturbation experiments are conducted to examine the plant response in space and time. Understanding the inherently transient ecohydrologic systems is critical to improve predictions of climate change impacts on ecosystems.

Tuning coercive force by adjusting electric potential in solution processed Co/Pt(111) and the mechanism involved

PubMed Central

Chang, Cheng-Hsun-Tony; Kuo, Wei-Hsu; Chang, Yu-Chieh; Tsay, Jyh-Shen; Yau, Shueh-Lin

2017-01-01

A combination of a solution process and the control of the electric potential for magnetism represents a new approach to operating spintronic devices with a highly controlled efficiency and lower power consumption with reduced production cost. As a paradigmatic example, we investigated Co/Pt(111) in the Bloch-wall regime. The depression in coercive force was detected by applying a negative electric potential in an electrolytic solution. The reversible control of coercive force by varying the electric potential within few hundred millivolts is demonstrated. By changing the electric potential in ferromagnetic layers with smaller thicknesses, the efficiency for controlling the tunable coercive force becomes higher. Assuming that the pinning domains are independent of the applied electric potential, an electric potential tuning-magnetic anisotropy energy model was derived and provided insights into our knowledge of the relation between the electric potential tuning coercive force and the thickness of the ferromagnetic layer. Based on the fact that the coercive force can be tuned by changing the electric potential using a solution process, we developed a novel concept of electric-potential-tuned magnetic recording, resulting in a stable recording media with a high degree of writing ability. PMID:28255160

Dealing with a Paradigm Shift

PubMed Central

Pack, Allan I.

2015-01-01

Recent changes in policies by insurance companies with respect to mandating home sleep apnea testing rather than in-laboratory studies have a large impact on the financial viability of clinical sleep centers. Coping with this disruptive change requires forward planning. First, it is important to be well positioned with respect to facilities so that these can be quickly downsized to control costs. There is also a need to develop, in advance, an accredited home sleep study program so that centers can respond to the rapidly changing environment. Following the change there is a need to control costs by rapidly downsizing the technology workforce. Technologists can be retrained for other essential roles. Centralizing the precertification process with knowledgeable, well-trained staff and a robust auditing process is an essential component. The approach taken at the University of Pennsylvania to this change is described as is how one can ensure continued financial viability of a comprehensive sleep center program in a major academic medical center. Citation: Pack AI. Dealing with a paradigm shift. J Clin Sleep Med 2015;11(8):925–929. PMID:26094918

Computer aided design of digital controller for radial active magnetic bearings

NASA Technical Reports Server (NTRS)

Cai, Zhong; Shen, Zupei; Zhang, Zuming; Zhao, Hongbin

1992-01-01

A five degree of freedom Active Magnetic Bearing (AMB) system is developed which is controlled by digital controllers. The model of the radial AMB system is linearized and the state equation is derived. Based on the state variables feedback theory, digital controllers are designed. The performance of the controllers are evaluated according to experimental results. The Computer Aided Design (CAD) method is used to design controllers for magnetic bearings. The controllers are implemented with a digital signal processing (DSP) system. The control algorithms are realized with real-time programs. It is very easy to change the controller by changing or modifying the programs. In order to identify the dynamic parameters of the controlled magnetic system, a special experiment was carried out. Also, the online Recursive Least Squares (RLS) parameter identification method is studied. It can be realized with the digital controllers. Online parameter identification is essential for the realization of an adaptive controller.

Phase formation polycrystalline vanadium oxide via thermal annealing process under controlled nitrogen pressure

NASA Astrophysics Data System (ADS)

Jessadaluk, S.; Khemasiri, N.; Rahong, S.; Rangkasikorn, A.; Kayunkid, N.; Wirunchit, S.; Horprathum, M.; Chananonnawathron, C.; Klamchuen, A.; Nukeaw, J.

2017-09-01

This article provides an approach to improve and control crystal phases of the sputtering vanadium oxide (VxOy) thin films by post-thermal annealing process. Usually, as-deposited VxOy thin films at room temperature are amorphous phase: post-thermal annealing processes (400 °C, 2 hrs) under the various nitrogen (N2) pressures are applied to improve and control the crystal phase of VxOy thin films. The crystallinity of VxOy thin films changes from amorphous to α-V2O5 phase or V9O17 polycrystalline, which depend on the pressure of N2 carrier during annealing process. Moreover, the electrical resistivity of the VxOy thin films decrease from 105 Ω cm (amorphous) to 6×10-1 Ω cm (V9O17). Base on the results, our study show a simply method to improve and control phase formation of VxOy thin films.

Experience with dynamic reinforcement rates decreases resistance to extinction.

PubMed

Craig, Andrew R; Shahan, Timothy A

2016-03-01

The ability of organisms to detect reinforcer-rate changes in choice preparations is positively related to two factors: the magnitude of the change in rate and the frequency with which rates change. Gallistel (2012) suggested similar rate-detection processes are responsible for decreases in responding during operant extinction. Although effects of magnitude of change in reinforcer rate on resistance to extinction are well known (e.g., the partial-reinforcement-extinction effect), effects of frequency of changes in rate prior to extinction are unknown. Thus, the present experiments examined whether frequency of changes in baseline reinforcer rates impacts resistance to extinction. Pigeons pecked keys for variable-interval food under conditions where reinforcer rates were stable and where they changed within and between sessions. Overall reinforcer rates between conditions were controlled. In Experiment 1, resistance to extinction was lower following exposure to dynamic reinforcement schedules than to static schedules. Experiment 2 showed that resistance to presession feeding, a disruptor that should not involve change-detection processes, was unaffected by baseline-schedule dynamics. These findings are consistent with the suggestion that change detection contributes to extinction. We discuss implications of change-detection processes for extinction of simple and discriminated operant behavior and relate these processes to the behavioral-momentum based approach to understanding extinction. © 2016 Society for the Experimental Analysis of Behavior.

Numerical Simulation and Optimization of Directional Solidification Process of Single Crystal Superalloy Casting

PubMed Central

Zhang, Hang; Xu, Qingyan; Liu, Baicheng

2014-01-01

The rapid development of numerical modeling techniques has led to more accurate results in modeling metal solidification processes. In this study, the cellular automaton-finite difference (CA-FD) method was used to simulate the directional solidification (DS) process of single crystal (SX) superalloy blade samples. Experiments were carried out to validate the simulation results. Meanwhile, an intelligent model based on fuzzy control theory was built to optimize the complicate DS process. Several key parameters, such as mushy zone width and temperature difference at the cast-mold interface, were recognized as the input variables. The input variables were functioned with the multivariable fuzzy rule to get the output adjustment of withdrawal rate (v) (a key technological parameter). The multivariable fuzzy rule was built, based on the structure feature of casting, such as the relationship between section area, and the delay time of the temperature change response by changing v, and the professional experience of the operator as well. Then, the fuzzy controlling model coupled with CA-FD method could be used to optimize v in real-time during the manufacturing process. The optimized process was proven to be more flexible and adaptive for a steady and stray-grain free DS process. PMID:28788535

Effectiveness of facilitated introduction of a standard operating procedure into routine processes in the operating theatre: a controlled interrupted time series.

PubMed

Morgan, Lauren; New, Steve; Robertson, Eleanor; Collins, Gary; Rivero-Arias, Oliver; Catchpole, Ken; Pickering, Sharon P; Hadi, Mohammed; Griffin, Damian; McCulloch, Peter

2015-02-01

Standard operating procedures (SOPs) should improve safety in the operating theatre, but controlled studies evaluating the effect of staff-led implementation are needed. In a controlled interrupted time series, we evaluated three team process measures (compliance with WHO surgical safety checklist, non-technical skills and technical performance) and three clinical outcome measures (length of hospital stay, complications and readmissions) before and after a 3-month staff-led development of SOPs. Process measures were evaluated by direct observation, using Oxford Non-Technical Skills II for non-technical skills and the 'glitch count' for technical performance. All staff in two orthopaedic operating theatres were trained in the principles of SOPs and then assisted to develop standardised procedures. Staff in a control operating theatre underwent the same observations but received no training. The change in difference between active and control groups was compared before and after the intervention using repeated measures analysis of variance. We observed 50 operations before and 55 after the intervention and analysed clinical data on 1022 and 861 operations, respectively. The staff chose to structure their efforts around revising the 'whiteboard' which documented and prompted tasks, rather than directly addressing specific task problems. Although staff preferred and sustained the new system, we found no significant differences in process or outcome measures before/after intervention in the active versus the control group. There was a secular trend towards worse outcomes in the postintervention period, seen in both active and control theatres. SOPs when developed and introduced by frontline staff do not necessarily improve operative processes or outcomes. The inherent tension in improvement work between giving staff ownership of improvement and maintaining control of direction needs to be managed, to ensure staff are engaged but invest energy in appropriate change. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Observations and 3D hydrodynamics-based modeling of decadal-scale shoreline change along the Outer Banks, North Carolina

USGS Publications Warehouse

Safak, Ilgar; List, Jeffrey; Warner, John C.; Kumar, Nirnimesh

2017-01-01

Long-term decadal-scale shoreline change is an important parameter for quantifying the stability of coastal systems. The decadal-scale coastal change is controlled by processes that occur on short time scales (such as storms) and long-term processes (such as prevailing waves). The ability to predict decadal-scale shoreline change is not well established and the fundamental physical processes controlling this change are not well understood. Here we investigate the processes that create large-scale long-term shoreline change along the Outer Banks of North Carolina, an uninterrupted 60 km stretch of coastline, using both observations and a numerical modeling approach. Shoreline positions for a 24-yr period were derived from aerial photographs of the Outer Banks. Analysis of the shoreline position data showed that, although variable, the shoreline eroded an average of 1.5 m/yr throughout this period. The modeling approach uses a three-dimensional hydrodynamics-based numerical model coupled to a spectral wave model and simulates the full 24-yr time period on a spatial grid running on a short (second scale) time-step to compute the sediment transport patterns. The observations and the model results show similar magnitudes (O(105 m3/yr)) and patterns of alongshore sediment fluxes. Both the observed and the modeled alongshore sediment transport rates have more rapid changes at the north of our section due to continuously curving coastline, and possible effects of alongshore variations in shelf bathymetry. The southern section with a relatively uniform orientation, on the other hand, has less rapid transport rate changes. Alongshore gradients of the modeled sediment fluxes are translated into shoreline change rates that have agreement in some locations but vary in others. Differences between observations and model results are potentially influenced by geologic framework processes not included in the model. Both the observations and the model results show higher rates of erosion (∼−1 m/yr) averaged over the northern half of the section as compared to the southern half where the observed and modeled averaged net shoreline changes are smaller (<0.1 m/yr). The model indicates accretion in some shallow embayments, whereas observations indicate erosion in these locations. Further analysis identifies that the magnitude of net alongshore sediment transport is strongly dominated by events associated with high wave energy. However, both big- and small- wave events cause shoreline change of the same order of magnitude because it is the gradients in transport, not the magnitude, that are controlling shoreline change. Results also indicate that alongshore momentum is not a simple balance between wave breaking and bottom stress, but also includes processes of horizontal vortex force, horizontal advection and pressure gradient that contribute to long-term alongshore sediment transport. As a comparison to a more simple approach, an empirical formulation for alongshore sediment transport is used. The empirical estimates capture the effect of the breaking term in the hydrodynamics-based model, however, other processes that are accounted for in the hydrodynamics-based model improve the agreement with the observed alongshore sediment transport.

The Changing Hardwood Export Market and Research to Keep the U.S. Competitive

Treesearch

Philip A. Araman

1988-01-01

Primary hardwood processors face many interrelated market, product, processing, and resource problems generated by the increasing export market. In processing, yields and quality must be increased and costs must be reduced to stay competitive. Computer-aided and computer-controlled automated processing is also needed. The industry needs to keep its products competitive...

12 CFR 225.43 - Procedures for filing, processing, publishing, and acting on notices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Procedures for filing, processing, publishing... (REGULATION Y) Regulations Change in Bank Control § 225.43 Procedures for filing, processing, publishing, and.... Any person(s) filing a notice under this subpart shall publish, in a form prescribed by the Board, an...

The Effectiveness of E-Learning Systems: A Review of the Empirical Literature on Learner Control

ERIC Educational Resources Information Center

Sorgenfrei, Christian; Smolnik, Stefan

2016-01-01

E-learning systems are considerably changing education and organizational training. With the advancement of online-based learning systems, learner control over the instructional process has emerged as a decisive factor in technology-based forms of learning. However, conceptual work on the role of learner control in e-learning has not advanced…

A Platform for Change? Inclusive Research about "Choice and Control"

ERIC Educational Resources Information Center

Williams, Val; Ponting, Lisa; Ford, Kerrie

2015-01-01

Participation, voice and control have long been central concerns in the research at Norah Fry. This paper focuses on inclusive research relating to choice and control, as experienced by people with learning disabilities who use personal budgets and direct payments, and aims to question how the process of inclusive research can be linked to wider…

40 CFR 1054.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... 1054. We have not changed production processes or quality-control procedures for test engines in a way...) Describe any facility used to test production-line engines and state its location. (2) State the total U.S...

40 CFR 1054.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... 1054. We have not changed production processes or quality-control procedures for test engines in a way...) Describe any facility used to test production-line engines and state its location. (2) State the total U.S...

40 CFR 1054.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... 1054. We have not changed production processes or quality-control procedures for test engines in a way...) Describe any facility used to test production-line engines and state its location. (2) State the total U.S...

40 CFR 1054.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... 1054. We have not changed production processes or quality-control procedures for test engines in a way...) Describe any facility used to test production-line engines and state its location. (2) State the total U.S...

40 CFR 1054.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... 1054. We have not changed production processes or quality-control procedures for test engines in a way...) Describe any facility used to test production-line engines and state its location. (2) State the total U.S...

How surface mounds and depressions change during rainfall events

USDA-ARS?s Scientific Manuscript database

The soil roughness, or microrelief, controls processes occurring on the surface. Although there are numerous studies on how soil roughness affects soil erosion processes, little are focused on quantifying different roughness functions on surface hydrology and erosion, i.e., water diverging and soil...

40 CFR 60.21 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... control equipment or process change; and (5) Final compliance. (i) Region means an air quality control... standard of performance for new stationary sources, but for which air quality criteria have not been issued... account the cost of such reduction) the Administrator has determined has been adequately demonstrated for...

Neural changes associated with semantic processing in healthy aging despite intact behavioral performance.

PubMed

Lacombe, Jacinthe; Jolicoeur, Pierre; Grimault, Stephan; Pineault, Jessica; Joubert, Sven

2015-10-01

Semantic memory recruits an extensive neural network including the left inferior prefrontal cortex (IPC) and the left temporoparietal region, which are involved in semantic control processes, as well as the anterior temporal lobe region (ATL) which is considered to be involved in processing semantic information at a central level. However, little is known about the underlying neuronal integrity of the semantic network in normal aging. Young and older healthy adults carried out a semantic judgment task while their cortical activity was recorded using magnetoencephalography (MEG). Despite equivalent behavioral performance, young adults activated the left IPC to a greater extent than older adults, while the latter group recruited the temporoparietal region bilaterally and the left ATL to a greater extent than younger adults. Results indicate that significant neuronal changes occur in normal aging, mainly in regions underlying semantic control processes, despite an apparent stability in performance at the behavioral level. Copyright © 2015 Elsevier Inc. All rights reserved.

Thalamocortical integration of instrumental learning and performance and their disintegration in addiction.

PubMed

Balleine, Bernard W; Morris, Richard W; Leung, Beatrice K

2015-12-02

A recent focus of addiction research has been on the effect of drug exposure on the neural processes that mediate the acquisition and performance of goal-directed instrumental actions. Deficits in goal-directed control and a consequent dysregulation of habit learning processes have been described as resulting in compulsive drug seeking. Similarly, considerable research has focussed on the motivational and emotional changes that drugs produce and that result in changes in the incentive processes that modulate goal-directed performance. Although these areas have developed independently, we argue that the effects they described are likely not independent. Here we hypothesize that these changes result from a core deficit in the way the learning and performance factors that support goal-directed action are integrated at a neural level to maintain behavioural control. A dorsal basal ganglia stream mediating goal-directed learning and a ventral stream mediating various performance factors find several points of integration in the cortical basal ganglia system, most notably in the thalamocortical network linking basal ganglia output to a variety of cortical control centres. Recent research in humans and other animals is reviewed suggesting that learning and performance factors are integrated in a network centred on the mediodorsal thalamus and that disintegration in this network may provide the basis for a 'switch' from recreational to dysregulated drug seeking resulting in the well documented changes associated with addiction. Copyright © 2014 Elsevier B.V. All rights reserved.

Factors related to reduction in the consumption of fast food: application of the theory-based approaches.

PubMed

Zeinab, Jalambadani; Gholamreza, Garmaroudi; Mehdi, Yaseri; Mahmood, Tavousi; Korush, Jafarian

2017-09-21

The Trans-Theoretical model (TTM) and Theory of Planned Behaviour (TPB) may be promising models for understanding and predicting reduction in the consumption of fast food. The aim of this study was to examine the applicability of the Trans-Theoretical model (TTM) and the additional predictive role of the subjective norms and perceived behavioural control in predicting reduction consumption of fast food in obese Iranian adolescent girls. A cross sectional study design was conducted among twelve randomly selected schools in Sabzevar, Iran from 2015 to 2017. Four hundred eighty five randomly selected students consented to participate in the study. Hierarchical regression models used to predict the role of important variables that can influence the reduction in the consumption of fast food among students. using SPSS version 22. Variables Perceived behavioural control (r=0.58, P<0.001), Subjective norms (r=0.51, P<0.001), self-efficacy (r=0.49, P<0.001), decisional balance (pros) (r=0.29, P<0.001), decisional balance (cons) (r=0.25, P<0.001), stage of change (r=0.38, P<0.001), were significantly and positively correlated while experiential processes of change (r=0.08, P=0.135) and behavioural processes of change (r=0.09, P=0.145), were not significant. The study demonstrated that the TTM (except the experiential and behavioural processes of change) focusing on the perceived behavioural control and subjective norms are useful models for reduction in the consumption of fast food.

Adaptive response due to changes in gene regulation: a study with Drosophila.

PubMed Central

McDonald, J F; Chambers, G K; David, J; Ayala, F J

1977-01-01

In spite of the critical role of the process of adaptation in evolution, there are few detailed studies of the genotypic and molecular basis of the process. Drosophila melanogaster flies selected for increased tolerance to ethanol exhibited higher levels of alcohol dehydrogenase (alcohol:NAD+ oxidoreductase; EC 1.1.1.1) activity than unselected controls. A series of tests (electrophoresis, product inhibition, temperature stability, pH optima, substrate specificity, and Michaelis constants) gave no evidence of structural differences in the enzyme of the selected and the control flies. However, quantitative immunological assays showed that the selected flies contained significantly higher amounts of alcohol dehydrogenase. Adaptation of the selected flies to higher alcohol tolerance has most likely taken place by changes not in the structural gene locus coding for the enzyme, but by regulatory changes affecting the amount of gene product. Images PMID:412190

Media Ion Composition Controls Regulatory and Virulence Response of Salmonella in Spaceflight

PubMed Central

Wilson, James W.; Ott, C. Mark; Quick, Laura; Davis, Richard; zu Bentrup, Kerstin Höner; Crabbé, Aurélie; Richter, Emily; Sarker, Shameema; Barrila, Jennifer; Porwollik, Steffen; Cheng, Pui; McClelland, Michael; Tsaprailis, George; Radabaugh, Timothy; Hunt, Andrea; Shah, Miti; Nelman-Gonzalez, Mayra; Hing, Steve; Parra, Macarena; Dumars, Paula; Norwood, Kelly; Bober, Ramona; Devich, Jennifer; Ruggles, Ashleigh; CdeBaca, Autumn; Narayan, Satro; Benjamin, Joseph; Goulart, Carla; Rupert, Mark; Catella, Luke; Schurr, Michael J.; Buchanan, Kent; Morici, Lisa; McCracken, James; Porter, Marc D.; Pierson, Duane L.; Smith, Scott M.; Mergeay, Max; Leys, Natalie; Stefanyshyn-Piper, Heidemarie M.; Gorie, Dominic; Nickerson, Cheryl A.

2008-01-01

The spaceflight environment is relevant to conditions encountered by pathogens during the course of infection and induces novel changes in microbial pathogenesis not observed using conventional methods. It is unclear how microbial cells sense spaceflight-associated changes to their growth environment and orchestrate corresponding changes in molecular and physiological phenotypes relevant to the infection process. Here we report that spaceflight-induced increases in Salmonella virulence are regulated by media ion composition, and that phosphate ion is sufficient to alter related pathogenesis responses in a spaceflight analogue model. Using whole genome microarray and proteomic analyses from two independent Space Shuttle missions, we identified evolutionarily conserved molecular pathways in Salmonella that respond to spaceflight under all media compositions tested. Identification of conserved regulatory paradigms opens new avenues to control microbial responses during the infection process and holds promise to provide an improved understanding of human health and disease on Earth. PMID:19079590

Physiological principles of vestibular function on earth and in space

NASA Technical Reports Server (NTRS)

Minor, L. B.

1998-01-01

Physiological mechanisms underlying vestibular function have important implications for our ability to understand, predict, and modify balance processes during and after spaceflight. The microgravity environment of space provides many unique opportunities for studying the effects of changes in gravitoinertial force on structure and function of the vestibular system. Investigations of basic vestibular physiology and of changes in reflexes occurring as a consequence of exposure to microgravity have important implications for diagnosis and treatment of vestibular disorders in human beings. This report reviews physiological principles underlying control of vestibular processes on earth and in space. Information is presented from a functional perspective with emphasis on signals arising from labyrinthine receptors. Changes induced by microgravity in linear acceleration detected by the vestibulo-ocular reflexes. Alterations of the functional requirements for postural control in space are described. Areas of direct correlation between studies of vestibular reflexes in microgravity and vestibular disorders in human beings are discussed.

Attentional deployment is not necessary for successful emotion regulation via cognitive reappraisal or expressive suppression.

PubMed

Bebko, Genna M; Franconeri, Steven L; Ochsner, Kevin N; Chiao, Joan Y

2014-06-01

According to appraisal theories of emotion, cognitive reappraisal is a successful emotion regulation strategy because it involves cognitively changing our thoughts, which, in turn, change our emotions. However, recent evidence has challenged the importance of cognitive change and, instead, has suggested that attentional deployment may at least partly explain the emotion regulation success of cognitive reappraisal. The purpose of the current study was to examine the causal relationship between attentional deployment and emotion regulation success. We examined 2 commonly used emotion regulation strategies--cognitive reappraisal and expressive suppression-because both depend on attention but have divergent behavioral, experiential, and physiological outcomes. Participants were either instructed to regulate emotions during free-viewing (unrestricted image viewing) or gaze-controlled (restricted image viewing) conditions and to self-report negative emotional experience. For both emotion regulation strategies, emotion regulation success was not altered by changes in participant control over the (a) direction of attention (free-viewing vs. gaze-controlled) during image viewing and (b) valence (negative vs. neutral) of visual stimuli viewed when gaze was controlled. Taken together, these findings provide convergent evidence that attentional deployment does not alter subjective negative emotional experience during either cognitive reappraisal or expressive suppression, suggesting that strategy-specific processes, such as cognitive appraisal and response modulation, respectively, may have a greater impact on emotional regulation success than processes common to both strategies, such as attention.

When wanting to change is not enough: automatic appetitive processes moderate the effects of a brief alcohol intervention in hazardous-drinking college students.

PubMed

Ostafin, Brian D; Palfai, Tibor P

2012-12-07

Research indicates that brief motivational interventions are efficacious treatments for hazardous drinking. Little is known, however, about the psychological processes that may moderate intervention success. Based on growing evidence that drinking behavior may be influenced by automatic (nonvolitional) mental processes, the current study examined whether automatic alcohol-approach associations moderated the effect of a brief motivational intervention. Specifically, we examined whether the efficacy of a single-session intervention designed to increase motivation to reduce alcohol consumption would be moderated by the strength of participants' automatic alcohol-approach associations. Eighty-seven undergraduate hazardous drinkers participated for course credit. Participants completed an Implicit Association Test to measure automatic alcohol-approach associations, a baseline measure of readiness to change drinking behavior, and measures of alcohol involvement. Participants were then randomly assigned to either a brief (15-minute) motivational intervention or a control condition. Participants completed a measure of readiness to change drinking at the end of the first session and returned for a follow-up session six weeks later in which they reported on their drinking over the previous month. Compared with the control group, those in the intervention condition showed higher readiness to change drinking at the end of the baseline session but did not show decreased drinking quantity at follow-up. Automatic alcohol-approach associations moderated the effects of the intervention on change in drinking quantity. Among participants in the intervention group, those with weak automatic alcohol-approach associations showed greater reductions in the amount of alcohol consumed per occasion at follow-up compared with those with strong automatic alcohol-approach associations. Automatic appetitive associations with alcohol were not related with change in amount of alcohol consumed per occasion in control participants. Furthermore, among participants who showed higher readiness to change, those who exhibited weaker alcohol-approach associations showed greater reductions in drinking quantity compared with those who exhibited stronger alcohol-approach associations. The results support the idea that automatic mental processes may moderate the influence of brief motivational interventions on quantity of alcohol consumed per drinking occasion. The findings suggest that intervention efficacy may be improved by utilizing implicit measures to identify those who may be responsive to brief interventions and by developing intervention elements to address the influence of automatic processes on drinking behavior.

Sediment connectivity at source-bordering aeolian dunefields along the Colorado River in the Grand Canyon, USA

NASA Astrophysics Data System (ADS)

Sankey, Joel; Kasprak, Alan; Caster, Joshua; East, Amy; Fairley, Helen

2017-04-01

Aeolian dunefields that are primarily built and maintained with river-derived sediment are found in many river valleys throughout the world and are impacted by changes in climate, land use, and river regulation. Quantifying the dynamic response of these aeolian dunefields to alterations in river flow is especially difficult given the highly correlated nature of the interacting geomorphic and sediment transport processes that drive their formation and maintenance. We characterize the effects of controlled river floods on changes in sediment connectivity at source-bordering aeolian dunefields in the Grand Canyon, USA. Controlled floods from the Glen Canyon Dam are used to build sandbars along the Colorado River in Grand Canyon which provide the main sediment source for aeolian dunefields. Aeolian dunefields are a primary resource of concern for land managers in the Grand Canyon because they often contain buried archaeological features. To characterize dunefield response to controlled floods, we use a novel, automated approach for the mechanistic segregation of geomorphic change to discern the geomorphic processes responsible for driving topographic change in very high resolution digital elevation models-of-difference (DODs) that span multiple, consecutive controlled river floods at source-bordering dunefields. We subsequently compare the results of mechanistic segregation with modelled estimates of aeolian dunefield evolution in order to understand how dunefields respond to contemporary, anthropogenically-driven variability in sediment supply and connectivity. These methods provide a rapid technique for sediment budgeting and enable the inference of spatial and temporal patterns in sediment flux between the fluvial and aeolian domains. We anticipate that this approach will be adaptable to other river valleys where the interactions of aeolian, fluvial, and hillslope processes drive sediment connectivity for the maintenance of source-bordering aeolian dunefields.

A single aerobic exercise session accelerates movement execution but not central processing.

PubMed

Beyer, Kit B; Sage, Michael D; Staines, W Richard; Middleton, Laura E; McIlroy, William E

2017-03-27

Previous research has demonstrated that aerobic exercise has disparate effects on speed of processing and movement execution. In simple and choice reaction tasks, aerobic exercise appears to increase speed of movement execution while speed of processing is unaffected. In the flanker task, aerobic exercise has been shown to reduce response time on incongruent trials more than congruent trials, purportedly reflecting a selective influence on speed of processing related to cognitive control. However, it is unclear how changes in speed of processing and movement execution contribute to these exercise-induced changes in response time during the flanker task. This study examined how a single session of aerobic exercise influences speed of processing and movement execution during a flanker task using electromyography to partition response time into reaction time and movement time, respectively. Movement time decreased during aerobic exercise regardless of flanker congruence but returned to pre-exercise levels immediately after exercise. Reaction time during incongruent flanker trials decreased over time in both an aerobic exercise and non-exercise control condition indicating it was not specifically influenced by exercise. This disparate influence of aerobic exercise on movement time and reaction time indicates the importance of partitioning response time when examining the influence of aerobic exercise on speed of processing. The decrease in reaction time over time independent of aerobic exercise indicates that interpreting pre-to-post exercise changes in behavior requires caution. Copyright © 2017 IBRO. Published by Elsevier Ltd. All rights reserved.

Visualising landscape evolution: the effects of resolution on soil redistribution

NASA Astrophysics Data System (ADS)

Schoorl, Jeroen M.; Claessens, Lieven; (A) Veldkamp, Tom

2017-04-01

Landscape forming processes such as erosion by water, land sliding by water and gravity or ploughing by gravity, are closely related to resolution and land use changes. These processes may be controlled and influenced by multiple bio-physical and socio-economic driving factors, resulting in a complex multi-scale system. Consequently, land use changes should not be analysed in isolation without accounting for both on-site and off-site effects of these landscape processes in landscapes where water driven and or gravity driven processes are very active,. Especially the visualisation of these on- and off-site effects as a movie of evolving time series and changes is a potential valuable possibility in DEM modelling approaches. To investigate the interactions between land use, land use change, resolution of DEMs and landscape processes, a case study for the Álora region in southern Spain will presented, mainly as movies of modelling time-series, Starting from a baseline scenario of land use change, different levels of resolutions, interactions and feedbacks are added to the coupled LAPSUS model framework: Quantities and spatial patterns of both land use change and soil redistribution are compared between the baseline scenario without interactions and with each of the interaction mechanisms implemented consecutively. All as a function of spatial resolution. Keywords: LAPSUS; land use change; soil erosion, movie;

Inter-annual variability of transparent exopolymer particles in the Arctic Ocean reveals high sensitivity to ecosystem changes.

PubMed

Engel, Anja; Piontek, Judith; Metfies, Katja; Endres, Sonja; Sprong, Pim; Peeken, Ilka; Gäbler-Schwarz, Steffi; Nöthig, Eva-Maria

2017-06-23

Transparent exopolymer particles (TEP) are a class of marine gel particles and important links between surface ocean biology and atmospheric processes. Derived from marine microorganisms, these particles can facilitate the biological pumping of carbon dioxide to the deep sea, or act as cloud condensation and ice nucleation particles in the atmosphere. Yet, environmental controls on TEP abundance in the ocean are poorly known. Here, we investigated some of these controls during the first multiyear time-series on TEP abundance for the Fram Strait, the Atlantic gateway to the Central Arctic Ocean. Data collected at the Long-Term Ecological Research observatory HAUSGARTEN during 2009 to 2014 indicate a strong biological control with highest abundance co-occurring with the prymnesiophyte Phaeocystis pouchetii. Higher occurrence of P. pouchetii in the Arctic Ocean has previously been related to northward advection of warmer Atlantic waters, which is expected to increase in the future. Our study highlights the role of plankton key species in driving climate relevant processes; thus, changes in plankton distribution need to be accounted for when estimating the ocean's biogeochemical response to global change.

Physical Processes Dictate Early Biogeochemical Dynamics of Soil Pyrogenic Organic Matter in a Subtropical Forest Ecosystem

NASA Astrophysics Data System (ADS)

Stuart, Jason M.; Anderson, Russell; Lazzarino, Patrick; Kuehn, Kevin A.; Harvey, Omar R.

2018-05-01

Quantifying links between pyOM dynamics, environmental factors and processes is central to predicting ecosystem function and response to future perturbations. In this study, changes in carbon (TC), nitrogen (TN) , pH and relative recalcitrance (R50) for pine- and cordgrass-derived pyOM were measured at 3-6 weeks intervals throughout the first year of burial in the soil. Objectives were to 1) identify key environmental factors and processes driving early-stage pyOM dynamics, and 2) develop quantitative relationships between environmental factors and changes in pyOM properties. The study was conducted in sandy soils of a forested ecosystem in the Longleaf pine range, US with a focus on links between changes in pyOM properties, fire history (FH), cumulative precipitation (Pcum), average temperature (Tavg) and soil residence time (SRT). Pcum, SRT and Tavg were the main factors controlling TC and TN accounting for 77-91% and 64-96% of their respective variability. Fire history, along with Pcum, SRT and Tavg, exhibited significant controlling effects on pyOM, pH and R50 - accounting for 48-91% and 88-93% of respective variability. Volatilization of volatiles and leaching of water-soluble components (in summer) and the sorption of exogenous organic matter (fall through spring) were most plausibly controlling pyOM dynamics in this study. Overall, our results point to climatic and land management factors and physicochemical process as the main drivers of pyOM dynamics in the pine ecosystems of the Southeastern US.

Procurement of a more efficient railroad system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Detmold, P.J.

An analysis of how new technology penetrates the railroad system and who initiates the changes suggests ways for improving the procedures. The author identifies a six-step process in transport development which includes invention, innovation, information dissemination, and persuasion. He concludes that poor economic justification and the lack of capital explain the low rate of equipment replacement. The nature of the market and the need for standardized specification appear to influence procurement changes, but both suppliers and transport operators must be convinced of the need for change. The Advanced Train Control Systems Project illustrates how the initiation process works.

Role of electronic excitation in the amorphization of Ge-Sb-Te alloys.

PubMed

Li, Xian-Bin; Liu, X Q; Liu, Xin; Han, Dong; Zhang, Z; Han, X D; Sun, Hong-Bo; Zhang, S B

2011-07-01

First-principles molecular dynamics simulation reveals the effects of electronic excitation in the amorphization of Ge-Sb-Te. The excitation makes the phase change an element-selective process, lowers the critical amorphization temperature considerably, for example, to below 700 K at a 9% excitation, and reduces the atomic diffusion coefficient with respect to that of melt by at least 1 order of magnitude. Noticeably, the resulting structure has fewer wrong bonds and significantly increased phase-change reversibility. Our results point to a new direction in manipulating ultrafast phase-change processes with improved controllability.

Model based adaptive control of a continuous capture process for monoclonal antibodies production.

PubMed

Steinebach, Fabian; Angarita, Monica; Karst, Daniel J; Müller-Späth, Thomas; Morbidelli, Massimo

2016-04-29

A two-column capture process for continuous processing of cell-culture supernatant is presented. Similar to other multicolumn processes, this process uses sequential countercurrent loading of the target compound in order maximize resin utilization and productivity for a given product yield. The process was designed using a novel mechanistic model for affinity capture, which takes both specific adsorption as well as transport through the resin beads into account. Simulations as well as experimental results for the capture of an IgG antibody are discussed. The model was able to predict the process performance in terms of yield, productivity and capacity utilization. Compared to continuous capture with two columns operated batch wise in parallel, a 2.5-fold higher capacity utilization was obtained for the same productivity and yield. This results in an equal improvement in product concentration and reduction of buffer consumption. The developed model was used not only for the process design and optimization but also for its online control. In particular, the unit operating conditions are changed in order to maintain high product yield while optimizing the process performance in terms of capacity utilization and buffer consumption also in the presence of changing upstream conditions and resin aging. Copyright © 2016 Elsevier B.V. All rights reserved.

Spatial Reorientation of Sensorimotor Balance Control in Altered Gravity

NASA Technical Reports Server (NTRS)

Paloski, W. H.; Black, F. L.; Kaufman, G. D.; Reschke, M. F.; Wood, S. J.

2007-01-01

Sensorimotor coordination of body segments following space flight are more pronounced after landing when the head is actively tilted with respect to the trunk. This suggests that central vestibular processing shifts from a gravitational frame of reference to a head frame of reference in microgravity. A major effect of such changes is a significant postural instability documented by standard head-erect Sensory Organization Tests. Decrements in functional performance may still be underestimated when head and gravity reference frames remained aligned. The purpose of this study was to examine adaptive changes in spatial processing for balance control following space flight by incorporating static and dynamic tilts that dissociate head and gravity reference frames. A second aim of this study was to examine the feasibility of altering the re-adaptation process following space flight by providing discordant visual-vestibular-somatosensory stimuli using short-radius pitch centrifugation.

Multisite two-photon imaging of neurons on multielectrode arrays

NASA Astrophysics Data System (ADS)

Potter, Steve M.; Lukina, Natalia; Longmuir, Kenneth J.; Wu, Yan

2001-04-01

We wish to understand how neural systems store, recall, and process information. We are using cultured networks of cortical neurons grown on microelectrode arrays as a model system for studying the emergent properties of ensembles of living neurons. We have developed a 2-way communication interface between the cultured network and a computer- generated animal, the Neurally Controlled Animat. Neural activity is used to control the behavior of the Animat, and 2- photon time-lapse imaging is carried out in order to observe the morphological changes that might underlie changes in neural processing. The 2-photon microscope is ideal for repeated imaging over hours or days, with submicron resolution and little photodamage. We have designed a computer-controlled microscope stage that allows imaging several locations in sequence, in order to collect more image data. For the latest progress, see: http://www.caltech.edu/~pinelab/PotterGroup.htm.

Changed processing of visual sexual stimuli under GnRH-therapy--a single case study in pedophilia using eye tracking and fMRI.

PubMed

Jordan, Kirsten; Fromberger, Peter; Laubinger, Helge; Dechent, Peter; Müller, Jürgen L

2014-05-17

Antiandrogen therapy (ADT) has been used for 30 years to treat pedophilic patients. The aim of the treatment is a reduction in sexual drive and, in consequence, a reduced risk of recidivism. Yet the therapeutic success of antiandrogens is uncertain especially regarding recidivism. Meta-analyses and reviews report only moderate and often mutually inconsistent effects. Based on the case of a 47 year old exclusively pedophilic forensic inpatient, we examined the effectiveness of a new eye tracking method and a new functional magnetic resonance imaging (fMRI)-design in regard to the evaluation of ADT in pedophiles. We analyzed the potential of these methods in exploring the impact of ADT on automatic and controlled attentional processes in pedophiles. Eye tracking and fMRI measures were conducted before the initial ADT as well as four months after the onset of ADT. The patient simultaneously viewed an image of a child and an image of an adult while eye movements were measured. During the fMRI-measure the same stimuli were presented subliminally. Eye movements demonstrated that controlled attentional processes change under ADT, whereas automatic processes remained mostly unchanged. We assume that these results reflect either the increased ability of the patient to control his eye movements while viewing prepubertal stimuli or his better ability to manipulate his answer in a socially desirable manner. Unchanged automatic attentional processes could reflect the stable pedophilic preference of the patient. Using fMRI, the subliminal presentation of sexually relevant stimuli led to changed activation patterns under the influence of ADT in occipital and parietal brain regions, the hippocampus, and also in the orbitofrontal cortex. We suggest that even at an unconscious level ADT can lead to changed processing of sexually relevant stimuli, reflecting changes of cognitive and perceptive automatic processes. We are convinced that our experimental designs using eye tracking and fMRI could prospectively add additional and valuable information in the evaluation of ADT in paraphilic patients and sex offenders. But with respect to the limited significance of this single case study, these first results are preliminary and further studies have to be conducted with healthy subjects and patients.

Changed processing of visual sexual stimuli under GnRH-therapy – a single case study in pedophilia using eye tracking and fMRI

PubMed Central

2014-01-01

Background Antiandrogen therapy (ADT) has been used for 30 years to treat pedophilic patients. The aim of the treatment is a reduction in sexual drive and, in consequence, a reduced risk of recidivism. Yet the therapeutic success of antiandrogens is uncertain especially regarding recidivism. Meta-analyses and reviews report only moderate and often mutually inconsistent effects. Case presentation Based on the case of a 47 year old exclusively pedophilic forensic inpatient, we examined the effectiveness of a new eye tracking method and a new functional magnetic resonance imaging (fMRI)-design in regard to the evaluation of ADT in pedophiles. We analyzed the potential of these methods in exploring the impact of ADT on automatic and controlled attentional processes in pedophiles. Eye tracking and fMRI measures were conducted before the initial ADT as well as four months after the onset of ADT. The patient simultaneously viewed an image of a child and an image of an adult while eye movements were measured. During the fMRI-measure the same stimuli were presented subliminally. Eye movements demonstrated that controlled attentional processes change under ADT, whereas automatic processes remained mostly unchanged. We assume that these results reflect either the increased ability of the patient to control his eye movements while viewing prepubertal stimuli or his better ability to manipulate his answer in a socially desirable manner. Unchanged automatic attentional processes could reflect the stable pedophilic preference of the patient. Using fMRI, the subliminal presentation of sexually relevant stimuli led to changed activation patterns under the influence of ADT in occipital and parietal brain regions, the hippocampus, and also in the orbitofrontal cortex. We suggest that even at an unconscious level ADT can lead to changed processing of sexually relevant stimuli, reflecting changes of cognitive and perceptive automatic processes. Conclusion We are convinced that our experimental designs using eye tracking and fMRI could prospectively add additional and valuable information in the evaluation of ADT in paraphilic patients and sex offenders. But with respect to the limited significance of this single case study, these first results are preliminary and further studies have to be conducted with healthy subjects and patients. PMID:24885644

Production of erythrocytes from directly isolated or Delta1 Notch ligand expanded CD34+ hematopoietic progenitor cells: process characterization, monitoring and implications for manufacture.

PubMed

Glen, Katie E; Workman, Victoria L; Ahmed, Forhad; Ratcliffe, Elizabeth; Stacey, Adrian J; Thomas, Robert J

2013-09-01

Economic ex vivo manufacture of erythrocytes at 10(12) cell doses requires an efficiently controlled bio-process capable of extensive proliferation and high terminal density. High-resolution characterization of the process would identify production strategies for increased efficiency, monitoring and control. CD34(+) cord blood cells or equivalent cells that had been pre-expanded for 7 days with Delta1 Notch ligand were placed in erythroid expansion and differentiation conditions in a micro-scale ambr suspension bioreactor. Multiple culture parameters were varied, and phenotype markers and metabolites measured to identify conserved trends and robust monitoring markers. The cells exhibited a bi-modal erythroid differentiation pattern with an erythroid marker peak after 2 weeks and 3 weeks of culture; differentiation was comparatively weighted toward the second peak in Delta1 pre-expanded cells. Both differentiation events were strengthened by omission of stem cell factor and dexamethasone. The cumulative cell proliferation and death, or directly measured CD45 expression, enabled monitoring of proliferative rate of the cells. The metabolic activities of the cultures (glucose, glutamine and ammonia consumption or production) were highly variable but exhibited systematic change synchronized with the change in differentiation state. Erythroid differentiation chronology is partly determined by the heterogeneous CD34(+) progenitor compartment with implications for input control; Delta1 ligand-mediated progenitor culture can alter differentiation profile with control benefits for engineering production strategy. Differentiation correlated changes in cytokine response, markers and metabolic state will enable scientifically designed monitoring and timing of manufacturing process steps. Copyright © 2013 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

Nogo-A regulates spatial learning as well as memory formation and modulates structural plasticity in the adult mouse hippocampus.

PubMed

Zagrebelsky, Marta; Lonnemann, Niklas; Fricke, Steffen; Kellner, Yves; Preuß, Eike; Michaelsen-Preusse, Kristin; Korte, Martin

2017-02-01

Behavioral learning has been shown to involve changes in the function and structure of synaptic connections of the central nervous system (CNS). On the other hand, the neuronal circuitry in the mature brain is characterized by a high degree of stability possibly providing a correlate for long-term storage of information. This observation indicates the requirement for a set of molecules inhibiting plasticity and promoting stability thereby providing temporal and spatial specificity to plastic processes. Indeed, signaling of Nogo-A via its receptors has been shown to play a crucial role in restricting activity-dependent functional and structural plasticity in the adult CNS. However, whether Nogo-A controls learning and memory formation and what are the cellular and molecular mechanisms underlying this function is still unclear. Here we show that Nogo-A signaling controls spatial learning and reference memory formation upon training in the Morris water maze and negatively modulates structural changes at spines in the mouse hippocampus. Learning processes and the correlated structural plasticity have been shown to involve changes in excitatory as well as in inhibitory neuronal connections. We show here that Nogo-A is highly expressed not only in excitatory, but also in inhibitory, Parvalbumin positive neurons in the adult hippocampus. By this means our current and previous data indicate that Nogo-A loss-of-function positively influences spatial learning by priming the neuronal structure to a higher plasticity level. Taken together our results link the role of Nogo-A in negatively regulating plastic processes to a physiological function in controlling learning and memory processes in the mature hippocampus and open the interesting possibility that it might mainly act by controlling the function of the hippocampal inhibitory circuitry. Copyright © 2016 Elsevier Inc. All rights reserved.

Research on moving target defense based on SDN

NASA Astrophysics Data System (ADS)

Chen, Mingyong; Wu, Weimin

2017-08-01

An address mutation strategy was proposed. This strategy provided an unpredictable change in address, replacing the real address of the packet forwarding process and path mutation, thus hiding the real address of the host and path. a mobile object defense technology based on Spatio-temporal Mutation on this basis is proposed, Using the software Defined Network centralized control architecture advantage combines sFlow traffic monitoring technology and Moving Target Defense. A mutated time period which can be changed in real time according to the network traffic is changed, and the destination address is changed while the controller abruptly changes the address while the data packet is transferred between the switches to construct a moving target, confusing the host within the network, thereby protecting the host and network.

A case of the birth and death of a high reliability healthcare organisation.

PubMed

Roberts, K H; Madsen, P; Desai, V; Van Stralen, D

2005-06-01

High reliability organisations (HROs) are those in which errors rarely occur. To accomplish this they conduct relatively error free operations over long periods of time and make consistently good decisions resulting in high quality and reliability. Some organisational processes that characterise HROs are process auditing, implementing appropriate reward systems, avoiding quality degradation, appropriately perceiving that risk exists and developing strategies to deal with it, and command and control. Command and control processes include migrating decision making, redundancy in people or hardware, developing situational awareness, formal rules and procedures, and training. These processes must be tailored to the specific organisation implementing them. These processes were applied to a paediatric intensive care unit (PICU) where care was derived from problem solving methodology rather than protocol. After a leadership change, the unit returned to the hierarchical medical model of care. Important outcome variables such as infant mortality, patient return to the PICU after discharge, days on the PICU, air transports, degraded. Implications for clinical practice include providing caregivers with sufficient flexibility to meet changing situations, encouraging teamwork, and avoiding shaming, naming, and blaming.

Process and Formulation Effects on Protein Structure in Lyophilized Solids using Mass Spectrometric Methods

PubMed Central

Iyer, Lavanya K.; Sacha, Gregory A.; Moorthy, Balakrishnan S.; Nail, Steven L.; Topp, Elizabeth M.

2016-01-01

Myoglobin (Mb) was lyophilized in the absence (Mb-A) and presence (Mb-B) of sucrose in a pilot-scale lyophilizer with or without controlled ice nucleation. Cake morphology was characterized using scanning electron microscopy (SEM) and changes in protein structure were monitored using solid-state Fourier-transform infrared spectroscopy (ssFTIR), solid-state hydrogen-deuterium exchange-mass spectrometry (ssHDX-MS) and solid-state photolytic labeling-mass spectrometry (ssPL-MS). The results showed greater variability in nucleation temperature and irregular cake structure for formulations lyophilized without controlled nucleation. Controlled nucleation resulted in nucleation at ~ −5 °C and uniform cake structure. Formulations containing sucrose showed better retention of protein structure by all measures than formulations without sucrose. Samples lyophilized with and without controlled nucleation were similar by most measures of protein structure. However, ssPL-MS showed the greatest pLeu incorporation and more labeled regions for Mb-B lyophilized with controlled nucleation. The data support the use of ssHDX-MS and ssPL-MS to study formulation and process-induced conformational changes in lyophilized proteins. PMID:27044943

Internet-Based Attention Bias Modification for Social Anxiety: A Randomised Controlled Comparison of Training towards Negative and Training Towards Positive Cues

PubMed Central

Boettcher, Johanna; Leek, Linda; Matson, Lisa; Holmes, Emily A.; Browning, Michael; MacLeod, Colin; Andersson, Gerhard; Carlbring, Per

2013-01-01

Biases in attention processes are thought to play a crucial role in the aetiology and maintenance of Social Anxiety Disorder (SAD). The goal of the present study was to examine the efficacy of a programme intended to train attention towards positive cues and a programme intended to train attention towards negative cues. In a randomised, controlled, double-blind design, the impact of these two training conditions on both selective attention and social anxiety were compared to that of a control training condition. A modified dot probe task was used, and delivered via the internet. A total of 129 individuals, diagnosed with SAD, were randomly assigned to one of these three conditions and took part in a 14-day programme with daily training/control sessions. Participants in all three groups did not on average display an attentional bias prior to the training. Critically, results on change in attention bias implied that significantly differential change in selective attention to threat was not detected in the three conditions. However, symptoms of social anxiety reduced significantly from pre- to follow-up-assessment in all three conditions (dwithin  = 0.63–1.24), with the procedure intended to train attention towards threat cues producing, relative to the control condition, a significantly greater reduction of social fears. There were no significant differences in social anxiety outcome between the training condition intended to induce attentional bias towards positive cues and the control condition. To our knowledge, this is the first RCT where a condition intended to induce attention bias to negative cues yielded greater emotional benefits than a control condition. Intriguingly, changes in symptoms are unlikely to be by the mechanism of change in attention processes since there was no change detected in bias per se. Implications of this finding for future research on attention bias modification in social anxiety are discussed. Trial Registration ClinicalTrials.gov NCT01463137 PMID:24098630

Internet-based attention bias modification for social anxiety: a randomised controlled comparison of training towards negative and training towards positive cues.

PubMed

Boettcher, Johanna; Leek, Linda; Matson, Lisa; Holmes, Emily A; Browning, Michael; MacLeod, Colin; Andersson, Gerhard; Carlbring, Per

2013-01-01

Biases in attention processes are thought to play a crucial role in the aetiology and maintenance of Social Anxiety Disorder (SAD). The goal of the present study was to examine the efficacy of a programme intended to train attention towards positive cues and a programme intended to train attention towards negative cues. In a randomised, controlled, double-blind design, the impact of these two training conditions on both selective attention and social anxiety were compared to that of a control training condition. A modified dot probe task was used, and delivered via the internet. A total of 129 individuals, diagnosed with SAD, were randomly assigned to one of these three conditions and took part in a 14-day programme with daily training/control sessions. Participants in all three groups did not on average display an attentional bias prior to the training. Critically, results on change in attention bias implied that significantly differential change in selective attention to threat was not detected in the three conditions. However, symptoms of social anxiety reduced significantly from pre- to follow-up-assessment in all three conditions (dwithin  = 0.63-1.24), with the procedure intended to train attention towards threat cues producing, relative to the control condition, a significantly greater reduction of social fears. There were no significant differences in social anxiety outcome between the training condition intended to induce attentional bias towards positive cues and the control condition. To our knowledge, this is the first RCT where a condition intended to induce attention bias to negative cues yielded greater emotional benefits than a control condition. Intriguingly, changes in symptoms are unlikely to be by the mechanism of change in attention processes since there was no change detected in bias per se. Implications of this finding for future research on attention bias modification in social anxiety are discussed. ClinicalTrials.gov NCT01463137.

Improving overly manufacturing metrics through application of feedforward mask-bias

NASA Astrophysics Data System (ADS)

Joubert, Etienne; Pellegrini, Joseph C.; Misra, Manish; Sturtevant, John L.; Bernhard, John M.; Ong, Phu; Crawshaw, Nathan K.; Puchalski, Vern

2003-06-01

Traditional run-to-run controllers that rely on highly correlated historical events to forecast process corrections have been shown to provide substantial benefit over manual control in the case of a fab that is primarily manufacturing high volume, frequent running parts (i.e., DRAM, MPU, and similar operations). However, a limitation of the traditional controller emerges when it is applied to a fab whose work in process (WIP) is composed of primarily short-running, high part count products (typical of foundries and ASIC fabs). This limitation exists because there is a strong likelihood that each reticle has a unique set of process corrections different from other reticles at the same process layer. Further limitations exist when it is realized that each reticle is loaded and aligned differently on multiple exposure tools.A structural change in how the run-to-run controller manages the frequent reticle changes associated with the high part count environment has allowed for breakthrough performance to be achieved. This breakthrough was mad possible by the realization that; 1. Reticle sourced errors were highly stable over long periods of time, thus allowing them to be deconvolved from the day to day tool and process drifts. 2. Reticle sourced errors can be modeled as a feedforward disturbance rather than as discriminates in defining and dividing process streams. In this paper, we show how to deconvolve the static (reticle) and dynamic (day to day tool and process) components from the overall error vector to better forecast feedback for existing products as well as how to compute or learn these values for new product introductions - or new tool startups. Manufacturing data will presented to support this discussion with some real world success stories.

Multivariate statistical process control in product quality review assessment - A case study.

PubMed

Kharbach, M; Cherrah, Y; Vander Heyden, Y; Bouklouze, A

2017-11-01

According to the Food and Drug Administration and the European Good Manufacturing Practices (GMP) guidelines, Annual Product Review (APR) is a mandatory requirement in GMP. It consists of evaluating a large collection of qualitative or quantitative data in order to verify the consistency of an existing process. According to the Code of Federal Regulation Part 11 (21 CFR 211.180), all finished products should be reviewed annually for the quality standards to determine the need of any change in specification or manufacturing of drug products. Conventional Statistical Process Control (SPC) evaluates the pharmaceutical production process by examining only the effect of a single factor at the time using a Shewhart's chart. It neglects to take into account the interaction between the variables. In order to overcome this issue, Multivariate Statistical Process Control (MSPC) can be used. Our case study concerns an APR assessment, where 164 historical batches containing six active ingredients, manufactured in Morocco, were collected during one year. Each batch has been checked by assaying the six active ingredients by High Performance Liquid Chromatography according to European Pharmacopoeia monographs. The data matrix was evaluated both by SPC and MSPC. The SPC indicated that all batches are under control, while the MSPC, based on Principal Component Analysis (PCA), for the data being either autoscaled or robust scaled, showed four and seven batches, respectively, out of the Hotelling T 2 95% ellipse. Also, an improvement of the capability of the process is observed without the most extreme batches. The MSPC can be used for monitoring subtle changes in the manufacturing process during an APR assessment. Copyright © 2017 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.

Active control of complex, multicomponent self-assembly processes

NASA Astrophysics Data System (ADS)

Schulman, Rebecca

The kinetics of many complex biological self-assembly processes such as cytoskeletal assembly are precisely controlled by cells. Spatiotemporal control over rates of filament nucleation, growth and disassembly determine how self-assembly occurs and how the assembled form changes over time. These reaction rates can be manipulated by changing the concentrations of the components needed for assembly by activating or deactivating them. I will describe how we can use these principles to design driven self-assembly processes in which we assemble and disassemble multiple types of components to create micron-scale networks of semiflexible filaments assembled from DNA. The same set of primitive components can be assembled into many different, structures depending on the concentrations of different components and how designed, DNA-based chemical reaction networks manipulate these concentrations over time. These chemical reaction networks can in turn interpret environmental stimuli to direct complex, multistage response. Such a system is a laboratory for understanding complex active material behaviors, such as metamorphosis, self-healing or adaptation to the environment that are ubiquitous in biological systems but difficult to quantitatively characterize or engineer.

Investigation of central pain processing in shoulder pain: converging results from two musculoskeletal pain models

PubMed Central

Valencia, Carolina; Kindler, Lindsay L.; Fillingim, Roger B.; George, Steven Z.

2011-01-01

Recent reports suggest deficits in conditioned pain modulation (CPM) and enhanced suprathreshold heat pain response (SHPR) potentially play a role in the development of chronic pain. The purpose of this study was to investigate whether central pain processing was altered in 2 musculoskeletal shoulder pain models. The goals of this study were to determine whether central pain processing: 1) differs between healthy subjects and patients with clinical shoulder pain, 2) changes with induction of exercise induced muscle pain (EIMP), and 3) changes 3 months after shoulder surgery. Fifty eight patients with clinical shoulder pain and 56 age and sex matched healthy subjects were included in these analyses. The healthy cohort was examined before inducing EIMP, and 48 and 96 hours later. The clinical cohort was examined before shoulder surgery and 3 months later. CPM did not differ between the cohorts, however; SHPR was elevated for patients with shoulder pain compared to healthy controls. Induction of acute shoulder pain with EIMP resulted in increased shoulder pain intensity but did not change CPM or SHPR. Three months following shoulder surgery clinical pain intensity decreased but CPM was unchanged from pre-operative assessment. In contrast SHPR was decreased and showed values comparable with healthy controls at 3 months. Therefore, the present study suggests that: 1) clinical shoulder pain is associated with measurable changes in central pain processing, 2) exercise-induced shoulder pain did not affect measures of central pain processing, and 3) elevated SHPR was normalized with shoulder surgery. Collectively our findings support neuroplastic changes in pain modulation were associated with decreases in clinical pain intensity only, and could be detected more readily with thermal stimuli. PMID:22208804

An empirical, integrated forest biomass monitoring system

NASA Astrophysics Data System (ADS)

Kennedy, Robert E.; Ohmann, Janet; Gregory, Matt; Roberts, Heather; Yang, Zhiqiang; Bell, David M.; Kane, Van; Hughes, M. Joseph; Cohen, Warren B.; Powell, Scott; Neeti, Neeti; Larrue, Tara; Hooper, Sam; Kane, Jonathan; Miller, David L.; Perkins, James; Braaten, Justin; Seidl, Rupert

2018-02-01

The fate of live forest biomass is largely controlled by growth and disturbance processes, both natural and anthropogenic. Thus, biomass monitoring strategies must characterize both the biomass of the forests at a given point in time and the dynamic processes that change it. Here, we describe and test an empirical monitoring system designed to meet those needs. Our system uses a mix of field data, statistical modeling, remotely-sensed time-series imagery, and small-footprint lidar data to build and evaluate maps of forest biomass. It ascribes biomass change to specific change agents, and attempts to capture the impact of uncertainty in methodology. We find that: • A common image framework for biomass estimation and for change detection allows for consistent comparison of both state and change processes controlling biomass dynamics. • Regional estimates of total biomass agree well with those from plot data alone. • The system tracks biomass densities up to 450-500 Mg ha-1 with little bias, but begins underestimating true biomass as densities increase further. • Scale considerations are important. Estimates at the 30 m grain size are noisy, but agreement at broad scales is good. Further investigation to determine the appropriate scales is underway. • Uncertainty from methodological choices is evident, but much smaller than uncertainty based on choice of allometric equation used to estimate biomass from tree data. • In this forest-dominated study area, growth and loss processes largely balance in most years, with loss processes dominated by human removal through harvest. In years with substantial fire activity, however, overall biomass loss greatly outpaces growth. Taken together, our methods represent a unique combination of elements foundational to an operational landscape-scale forest biomass monitoring program.

The antagonistic modulation of Arp2/3 activity by N-WASP, WAVE2 and PICK1 defines dynamic changes in astrocyte morphology.

PubMed

Murk, Kai; Blanco Suarez, Elena M; Cockbill, Louisa M R; Banks, Paul; Hanley, Jonathan G

2013-09-01

Astrocytes exhibit a complex, branched morphology, allowing them to functionally interact with numerous blood vessels, neighboring glial processes and neuronal elements, including synapses. They also respond to central nervous system (CNS) injury by a process known as astrogliosis, which involves morphological changes, including cell body hypertrophy and thickening of major processes. Following severe injury, astrocytes exhibit drastically reduced morphological complexity and collectively form a glial scar. The mechanistic details behind these morphological changes are unknown. Here, we investigate the regulation of the actin-nucleating Arp2/3 complex in controlling dynamic changes in astrocyte morphology. In contrast to other cell types, Arp2/3 inhibition drives the rapid expansion of astrocyte cell bodies and major processes. This intervention results in a reduced morphological complexity of astrocytes in both dissociated culture and in brain slices. We show that this expansion requires functional myosin II downstream of ROCK and RhoA. Knockdown of the Arp2/3 subunit Arp3 or the Arp2/3 activator N-WASP by siRNA also results in cell body expansion and reduced morphological complexity, whereas depleting WAVE2 specifically reduces the branching complexity of astrocyte processes. By contrast, knockdown of the Arp2/3 inhibitor PICK1 increases astrocyte branching complexity. Furthermore, astrocyte expansion induced by ischemic conditions is delayed by PICK1 knockdown or N-WASP overexpression. Our findings identify a new morphological outcome for Arp2/3 activation in restricting rather than promoting outwards movement of the plasma membrane in astrocytes. The Arp2/3 regulators PICK1, and N-WASP and WAVE2 function antagonistically to control the complexity of astrocyte branched morphology, and this mechanism underlies the morphological changes seen in astrocytes during their response to pathological insult.

KSC-05pd2572

NASA Image and Video Library

2005-12-07

KENNEDY SPACE CENTER, FLA. -- In NASA Kennedy Space Center’s Orbiter Processing Facility Bay 1, technicians check details for the installation of the forward reaction control system on Atlantis (behind them). The control system fits just behind the nose cone and provides the thrust for attitude (rotational) maneuvers (pitch, yaw and roll) and for small velocity changes along the orbiter axis (translation maneuvers). Processing of Atlantis is under way for mission STS-115, the 19th flight to the International Space Station.

KSC-05pd2573

NASA Image and Video Library

2005-12-07

KENNEDY SPACE CENTER, FLA. -- In NASA Kennedy Space Center’s Orbiter Processing Facility Bay 1, a technician inspects a point of installation of the forward reaction control system on Atlantis. The control system fits just behind the nose cone and provides the thrust for attitude (rotational) maneuvers (pitch, yaw and roll) and for small velocity changes along the orbiter axis (translation maneuvers). Processing of Atlantis is under way for mission STS-115, the 19th flight to the International Space Station.

A multidirectional communication model: implications for social marketing practice.

PubMed

Thackeray, Rosemary; Neiger, Brad L

2009-04-01

The landscape of sending and receiving information has changed dramatically in the past 25 years. The communication process is changing from being unidirectional to multidirectional as consumers are becoming active participants by creating, seeking, and sharing information using a variety of channels and devices. The purpose of this article is to describe how this shift in the communication process- where gatekeepers control the creation and content of information and consumers are less active recipients to one that reflects a multidirectional and more dynamic process with participative consumers-will affect the social marketing process. This shift in communication does not represent an option for social marketers so much as a necessity. As professionals respond to this evolving communication model, the practice of social marketing can remain vibrant as a relevant consumer-oriented approach to behavior change.

[Study on the change of semantic perspective of schistosomiasis control in China].

PubMed

Zhou, Li-ying; Liu, Si-yuan; Li, Yu-ye; Deng, Yao; Yang, Kun

2015-12-01

To analyze the evolution process, discourse and semantic meaning of schistosomiasis prevention and control, so as to provide suggestions for control work. The official documents and mainstream media reports of schistosomiasis prevention and control were selected at different periods as discourse samples, and the deep social reasons behind the strategy change and the semantic meaning of the utterance were analyzed at different periods. The discourse of schistosomiasis prevention and control experienced the evolution of the political discourse, pluralistic discourse and public discourse, and the semantic connotations showed the authority conflict semantic features, and then transferred to semantic cooperation. The prevention and control of schistosomiasis have different semantic meanings at different periods, and the prevention and control work should correspond to a social practice, seek truth from facts, correctly understand the actual situation, and then establish the effective control policy.

Riboregulators: Fine-Tuning Virulence in Shigella.

PubMed

Fris, Megan E; Murphy, Erin R

2016-01-01

Within the past several years, RNA-mediated regulation (ribo-regulation) has become increasingly recognized for its importance in controlling critical bacterial processes. Regulatory RNA molecules, or riboregulators, are perpetually responsive to changes within the micro-environment of a bacterium. Notably, several characterized riboregulators control virulence in pathogenic bacteria, as is the case for each riboregulator characterized to date in Shigella. The timing of virulence gene expression and the ability of the pathogen to adapt to rapidly changing environmental conditions is critical to the establishment and progression of infection by Shigella species; ribo-regulators mediate each of these important processes. This mini review will present the current state of knowledge regarding RNA-mediated regulation in Shigella by detailing the characterization and function of each identified riboregulator in these pathogens.

Phytometric intelligence sensors

NASA Technical Reports Server (NTRS)

Seelig, Hans-Dieter (Inventor); Stoner, II, Richard J. (Inventor); Hoehn, Alexander (Inventor); Adams, III, William Walter (Inventor)

2010-01-01

Methods and apparatus for determining when plants require watering, and methods of attending to the watering of plants including signaling the grower that the plants are in need of hydration are provided. The novel methods include real-time measurement of plant metabolics and phytometric physiology changes of intrinsic physical or behavioral traits within the plant such as determining physiological flux measurement of enzyme flux due to environmental changes such as the wind and drought stress, soil and plant mineral deficiencies, or the interaction with a bio-control for organic disease control including, cell movement, signal transduction, internal chemical processes and external environmental processes including when plants require watering, and methods of attending to the watering of plants including signaling the grower that the plants are in need of hydration.

40 CFR 62.15065 - How do I comply with the increment of progress for submittal of a final control plan?

Code of Federal Regulations, 2010 CFR

2010-07-01

... describing the devices for air pollution control and process changes that you will use to comply with the emission limits and other requirements of this subpart. If you plan to reduce your small municipal waste...

Visual operations control in administrative environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carson, M.L.; Levine, L.O.

1995-03-01

When asked what comes to mind when they think of ``controlling work`` in the office, people may respond with ``overbearing boss,`` ``no autonomy,`` or ``Theory X management.`` The idea of controlling work in white collar or administrative environments can have a negative connotation. However, office life is often chaotic and miserable precisely because the work processes are out of control, and managers must spend their time looking over people`s shoulders and fighting fires. While management styles and structures vary, the need for control of work processes does not. Workers in many environments are being reorganized into self-managed work teams. Thesemore » teams are expected to manage their own work through increased autonomy and empowerment. However, even empowered work teams must manage their work processes because of process variation. The amount of incoming jobs vary with both expected (seasonal) and unexpected demand. The mixture of job types vary over time, changing the need for certain skills or knowledge. And illness and turnover affect the availability of workers with needed skills and knowledge. Clearly, there is still a need to control work, whether the authority for controlling work is vested in one person or many. Visual control concepts provide simple, inexpensive, and flexible mechanisms for managing processes in work teams and continuous improvement administrative environments.« less

Mindfulness training alters emotional memory recall compared to active controls: support for an emotional information processing model of mindfulness.

PubMed

Roberts-Wolfe, Douglas; Sacchet, Matthew D; Hastings, Elizabeth; Roth, Harold; Britton, Willoughby

2012-01-01

While mindfulness-based interventions have received widespread application in both clinical and non-clinical populations, the mechanism by which mindfulness meditation improves well-being remains elusive. One possibility is that mindfulness training alters the processing of emotional information, similar to prevailing cognitive models of depression and anxiety. The aim of this study was to investigate the effects of mindfulness training on emotional information processing (i.e., memory) biases in relation to both clinical symptomatology and well-being in comparison to active control conditions. Fifty-eight university students (28 female, age = 20.1 ± 2.7 years) participated in either a 12-week course containing a "meditation laboratory" or an active control course with similar content or experiential practice laboratory format (music). Participants completed an emotional word recall task and self-report questionnaires of well-being and clinical symptoms before and after the 12-week course. Meditators showed greater increases in positive word recall compared to controls [F(1, 56) = 6.6, p = 0.02]. The meditation group increased significantly more on measures of well-being [F(1, 56) = 6.6, p = 0.01], with a marginal decrease in depression and anxiety [F(1, 56) = 3.0, p = 0.09] compared to controls. Increased positive word recall was associated with increased psychological well-being (r = 0.31, p = 0.02) and decreased clinical symptoms (r = -0.29, p = 0.03). Mindfulness training was associated with greater improvements in processing efficiency for positively valenced stimuli than active control conditions. This change in emotional information processing was associated with improvements in psychological well-being and less depression and anxiety. These data suggest that mindfulness training may improve well-being via changes in emotional information processing. Future research with a fully randomized design will be needed to clarify the possible influence of self-selection.

Statistical Process Control: A Quality Tool for a Venous Thromboembolic Disease Registry.

PubMed

Posadas-Martinez, Maria Lourdes; Rojas, Liliana Paloma; Vazquez, Fernando Javier; De Quiros, Fernan Bernaldo; Waisman, Gabriel Dario; Giunta, Diego Hernan

2016-01-01

We aim to describe Statistical Control Process as a quality tool for the Institutional Registry of Venous Thromboembolic Disease (IRTD), a registry developed in a community-care tertiary hospital in Buenos Aires, Argentina. The IRTD is a prospective cohort. The process of data acquisition began with the creation of a computerized alert generated whenever physicians requested imaging or laboratory study to diagnose venous thromboembolism, which defined eligible patients. The process then followed a structured methodology for patient's inclusion, evaluation, and posterior data entry. To control this process, process performance indicators were designed to be measured monthly. These included the number of eligible patients, the number of included patients, median time to patient's evaluation, and percentage of patients lost to evaluation. Control charts were graphed for each indicator. The registry was evaluated in 93 months, where 25,757 patients were reported and 6,798 patients met inclusion criteria. The median time to evaluation was 20 hours (SD, 12) and 7.7% of the total was lost to evaluation. Each indicator presented trends over time, caused by structural changes and improvement cycles, and therefore the central limit suffered inflexions. Statistical process control through process performance indicators allowed us to control the performance of the registry over time to detect systematic problems. We postulate that this approach could be reproduced for other clinical registries.

SUMMARY REPORT: CONTROL AND TREATMENT TECHNOLOGY FOR THE METAL FINISHING INDUSTRY: IN -PLANT CHANGES

EPA Science Inventory

This 30 - page Technology Transfer Report ummarizes how he metal finishing industry in the United States is subject to a variety of changing business conditions. wo of the most significant factors are the increasing costs of materials, such as plating chemicals and process water,...

Cross-scale analysis of fire regimes

Treesearch

Donald A. Falk; Carol Miller; Donald McKenzie; Anne E. Black

2007-01-01

Cross-scale spatial and temporal perspectives are important for studying contagious landscape disturbances such as fire, which are controlled by myriad processes operating at different scales. We examine fire regimes in forests of western North America, focusing on how observed patterns of fire frequency change across spatial scales. To quantify changes in fire...

Electronic Publishing and Document Delivery; A Case Study of Commercial Information Services on the Internet.

ERIC Educational Resources Information Center

Abbott, Anthony

1992-01-01

Discusses the electronic publishing activities of Meckler Publishing on the Internet, including a publications catalog, an electronic journal, and tables of contents databases. Broader issues of commercial network publishing are also addressed, including changes in the research process, changes in publishing, bibliographic control,…

Examining Increased Flexibility in Assessment Formats

ERIC Educational Resources Information Center

Irwin, Brian; Hepplestone, Stuart

2012-01-01

There have been calls in the literature for changes to assessment practices in higher education, to increase flexibility and give learners more control over the assessment process. This article explores the possibilities of allowing student choice in the format used to present their work, as a starting point for changing assessment, based on…

Active disturbance rejection controller for chemical reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Both, Roxana; Dulf, Eva H.; Muresan, Cristina I., E-mail: roxana.both@aut.utcluj.ro

2015-03-10

In the petrochemical industry, the synthesis of 2 ethyl-hexanol-oxo-alcohols (plasticizers alcohol) is of high importance, being achieved through hydrogenation of 2 ethyl-hexenal inside catalytic trickle bed three-phase reactors. For this type of processes the use of advanced control strategies is suitable due to their nonlinear behavior and extreme sensitivity to load changes and other disturbances. Due to the complexity of the mathematical model an approach was to use a simple linear model of the process in combination with an advanced control algorithm which takes into account the model uncertainties, the disturbances and command signal limitations like robust control. However themore » resulting controller is complex, involving cost effective hardware. This paper proposes a simple integer-order control scheme using a linear model of the process, based on active disturbance rejection method. By treating the model dynamics as a common disturbance and actively rejecting it, active disturbance rejection control (ADRC) can achieve the desired response. Simulation results are provided to demonstrate the effectiveness of the proposed method.« less

Automatic sample changer control software for automation of neutron activation analysis process in Malaysian Nuclear Agency

NASA Astrophysics Data System (ADS)

Yussup, N.; Ibrahim, M. M.; Rahman, N. A. A.; Mokhtar, M.; Salim, N. A. A.; Soh@Shaari, S. C.; Azman, A.; Lombigit, L.; Azman, A.; Omar, S. A.

2018-01-01

Most of the procedures in neutron activation analysis (NAA) process that has been established in Malaysian Nuclear Agency (Nuclear Malaysia) since 1980s were performed manually. These manual procedures carried out by the NAA laboratory personnel are time consuming and inefficient especially for sample counting and measurement process. The sample needs to be changed and the measurement software needs to be setup for every one hour counting time. Both of these procedures are performed manually for every sample. Hence, an automatic sample changer system (ASC) that consists of hardware and software is developed to automate sample counting process for up to 30 samples consecutively. This paper describes the ASC control software for NAA process which is designed and developed to control the ASC hardware and call GammaVision software for sample measurement. The software is developed by using National Instrument LabVIEW development package.

Neural correlates of active controlled retrieval development: An exploratory ERP study.

PubMed

Simard, France; Cadoret, Geneviève

2018-07-01

Working memory is composed of different processes and encompasses not only the temporary storage of information but also its manipulation in order to perform complex cognitive activities. During childhood, one of these manipulation processes, namely active controlled retrieval, improves significantly between the age of 6 to 10, suggesting that the neuronal network supporting this function undergoes substantial maturational changes. The present study examined the neural activity of 14 healthy children and 14 adults while performing an active controlled retrieval task. Results showed differences in brain activity according to active controlled retrieval in a 300-500 ms window corresponding to the retrieval period. Active controlled retrieval was associated with a P3b-like potential in parietal sites for both children and adults. In fronto-central sites, children demonstrated a "N400 like" potential associated with active retrieval processing. These results are discussed in terms of maturational development. Copyright © 2018 Elsevier Inc. All rights reserved.

Automated plasma control with optical emission spectroscopy

NASA Astrophysics Data System (ADS)

Ward, P. P.

Plasma etching and desmear processes for printed wiring board (PWB) manufacture are difficult to predict and control. Non-uniformity of most plasma processes and sensitivity to environmental changes make it difficult to maintain process stability from day to day. To assure plasma process performance, weight loss coupons or post-plasma destructive testing must be used. These techniques are not real-time methods however, and do not allow for immediate diagnosis and process correction. These tests often require scrapping some fraction of a batch to insure the integrity of the rest. Since these tests verify a successful cycle with post-plasma diagnostics, poor test results often determine that a batch is substandard and the resulting parts unusable. These tests are a costly part of the overall fabrication cost. A more efficient method of testing would allow for constant monitoring of plasma conditions and process control. Process anomalies should be detected and corrected before the parts being treated are damaged. Real time monitoring would allow for instantaneous corrections. Multiple site monitoring would allow for process mapping within one system or simultaneous monitoring of multiple systems. Optical emission spectroscopy conducted external to the plasma apparatus would allow for this sort of multifunctional analysis without perturbing the glow discharge. In this paper, optical emission spectroscopy for non-intrusive, in situ process control will be explored along with applications of this technique to for process control, failure analysis and endpoint determination in PWB manufacture.

Dieting and the self-control of eating in everyday environments: An experience sampling study

PubMed Central

Hofmann, Wilhelm; Adriaanse, Marieke; Vohs, Kathleen D.; Baumeister, Roy F.

2013-01-01

Objective The literature on dieting has sparked several debates over how restrained eaters differ from unrestrained eaters in their self-regulation of healthy and unhealthy food desires and what distinguishes successful from unsuccessful dieters. We addressed these debates using a four-component model of self-control that was tested using ecological momentary assessment, long-term weight change, and a laboratory measure of inhibitory control. Design A large sample of adults varying in dietary restraint and inhibitory control (as measured by a Stroop task) were equipped with smartphones for a week. They were beeped on random occasions and provided information on their experience and control of healthy and unhealthy food desires in everyday environments. Main Outcome Measures Desire strength, experienced conflict, resistance, enactment of desire, and weight change after a four-month follow-up. Results and Conclusions Dietary restraint was unrelated to desire frequency and strength, but associated with higher conflict experiences and motivation to use self-control with regard to food desires. Most importantly, relationships between and among dietary restraint and resistance, enactment of desire, and long-term weight change were moderated by inhibitory control: Compared to dieters low in response inhibition, dieters high in response inhibition were more likely to attempt to resist food desires, not consume desired food (especially unhealthy food), and objectively lost more weight over the ensuing four months. These results highlight the combinatory effects of aspects of the self-control process in dieters and highlight the value in linking theoretical process frameworks, experience sampling, and laboratory-based assessment in health science. PMID:23751109

A system identification approach for developing model predictive controllers of antibody quality attributes in cell culture processes

PubMed Central

Schmitt, John; Beller, Justin; Russell, Brian; Quach, Anthony; Hermann, Elizabeth; Lyon, David; Breit, Jeffrey

2017-01-01

As the biopharmaceutical industry evolves to include more diverse protein formats and processes, more robust control of Critical Quality Attributes (CQAs) is needed to maintain processing flexibility without compromising quality. Active control of CQAs has been demonstrated using model predictive control techniques, which allow development of processes which are robust against disturbances associated with raw material variability and other potentially flexible operating conditions. Wide adoption of model predictive control in biopharmaceutical cell culture processes has been hampered, however, in part due to the large amount of data and expertise required to make a predictive model of controlled CQAs, a requirement for model predictive control. Here we developed a highly automated, perfusion apparatus to systematically and efficiently generate predictive models using application of system identification approaches. We successfully created a predictive model of %galactosylation using data obtained by manipulating galactose concentration in the perfusion apparatus in serialized step change experiments. We then demonstrated the use of the model in a model predictive controller in a simulated control scenario to successfully achieve a %galactosylation set point in a simulated fed‐batch culture. The automated model identification approach demonstrated here can potentially be generalized to many CQAs, and could be a more efficient, faster, and highly automated alternative to batch experiments for developing predictive models in cell culture processes, and allow the wider adoption of model predictive control in biopharmaceutical processes. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 33:1647–1661, 2017 PMID:28786215

Memory Metals (MEMRYSAFE, FIRECHEK, ULTRAVALVE)

NASA Technical Reports Server (NTRS)

1991-01-01

A NASA contract led Memry Corporation to the development of commercial products based upon Shape Memory Effect, or the ability of certain metal alloys to change from one shape to another with temperature changes. MEMRYSAFE instantly restricts water flow in shower or sinks before scalding. ULTRAVALVE allows a user to preselect a bathing temperature. FIRECHEK is a fire control safety valve that detects unsafe temperatures and shuts off pneumatic pressure that operates control valves in industrial process lines containing hazardous gases or fluids.

Design of a data-driven predictive controller for start-up process of AMT vehicles.

PubMed

Lu, Xiaohui; Chen, Hong; Wang, Ping; Gao, Bingzhao

2011-12-01

In this paper, a data-driven predictive controller is designed for the start-up process of vehicles with automated manual transmissions (AMTs). It is obtained directly from the input-output data of a driveline simulation model constructed by the commercial software AMESim. In order to obtain offset-free control for the reference input, the predictor equation is gained with incremental inputs and outputs. Because of the physical characteristics, the input and output constraints are considered explicitly in the problem formulation. The contradictory requirements of less friction losses and less driveline shock are included in the objective function. The designed controller is tested under nominal conditions and changed conditions. The simulation results show that, during the start-up process, the AMT clutch with the proposed controller works very well, and the process meets the control objectives: fast clutch lockup time, small friction losses, and the preservation of driver comfort, i.e., smooth acceleration of the vehicle. At the same time, the closed-loop system has the ability to reject uncertainties, such as the vehicle mass and road grade.

Stabilizing laser energy density on a target during pulsed laser deposition of thin films

DOEpatents

Dowden, Paul C.; Jia, Quanxi

2016-05-31

A process for stabilizing laser energy density on a target surface during pulsed laser deposition of thin films controls the focused laser spot on the target. The process involves imaging an image-aperture positioned in the beamline. This eliminates changes in the beam dimensions of the laser. A continuously variable attenuator located in between the output of the laser and the imaged image-aperture adjusts the energy to a desired level by running the laser in a "constant voltage" mode. The process provides reproducibility and controllability for deposition of electronic thin films by pulsed laser deposition.

Study participant reported outcomes of mental health interventions: results from a randomized controlled trial among survivors of systematic violence in southern Iraq.

PubMed

Mahmooth, Z; Weiss, W M; Zangana, G A S; Bolton, P

2018-01-01

Common mental health problems experienced by survivors of systematic violence include trauma, depression, and anxiety. A trial of mental health interventions by community mental health workers for survivors of systematic violence in southern Iraq showed benefits from two psychotherapies on trauma, depression, anxiety, and function: Common Elements Treatment Approach (CETA) and cognitive processing therapy (CPT). This study assessed whether other non-predetermined changes reported by intervention participants were more common than in the control group. The trial involved 342 participants (CETA: 99 intervention, 50 control; CPT: 129 intervention, 64 control). Sixteen intervention-related changes since enrollment were identified from free-listing interviews of 15 early therapy completers. The changes were then added as a new quantitative module to the follow-up questionnaire. The changes were organized into eight groupings by thematic analysis - family, social standing, anger management, interest in regular activities, optimism, feeling close to God, avoiding smoking and drugs, and physical health. All participants were interviewed with this module and responses were compared between intervention and control participants. Multi-level, multi-variate regression models showed CETA intervention subjects with significant, positive changes relative to CETA controls on most themes. CPT intervention subjects showed little to no change compared with CPT controls in most themes. Participants receiving CETA reported more positive changes from therapy compared with controls than did participants receiving CPT. This study suggests differential effects of psychotherapy beyond the predetermined clinical outcome measures and that identification of these effects should be part of intervention evaluations.

Forest landscape models, a tool for understanding the effect of the large-scale and long-term landscape processes

Treesearch

Hong S. He; Robert E. Keane; Louis R. Iverson

2008-01-01

Forest landscape models have become important tools for understanding large-scale and long-term landscape (spatial) processes such as climate change, fire, windthrow, seed dispersal, insect outbreak, disease propagation, forest harvest, and fuel treatment, because controlled field experiments designed to study the effects of these processes are often not possible (...

Ultrasonics and Optics Would Control Shot Size

NASA Technical Reports Server (NTRS)

Morrison, A. D.

1983-01-01

Feedback system assures production of silicon shot of uniform size. Breakup of silicon stream into drops is controlled, in part, by varying frequency of vibrations imparted to stream by ultrasonic transducer. Drop size monitored by photodetector. Control method particularly advantageous in that constant size is maintained even while other process variables are changed deliberately or inadvertently. Applicable to materials other than silicon.

The Politics of Control...the Politics of Freedom...and the Politics of Balance: Three Ways of Creating Social Change.

ERIC Educational Resources Information Center

Clements, Elizabeth

2000-01-01

Educators who focus on control pay more attention to curriculum and depositing knowledge than learning processes. A focus on freedom shifts the locus of control but depends on rationality and autonomy, which isolate and dehumanize. A focus on balance enables a holistic, inclusive approach that acknowledges interpersonal connections. (Contains 55…

Changing work, changing health: can real work-time flexibility promote health behaviors and well-being?

PubMed

Moen, Phyllis; Kelly, Erin L; Tranby, Eric; Huang, Qinlei

2011-12-01

This article investigates a change in the structuring of work time, using a natural experiment to test whether participation in a corporate initiative (Results Only Work Environment; ROWE) predicts corresponding changes in health-related outcomes. Drawing on job strain and stress process models, we theorize greater schedule control and reduced work-family conflict as key mechanisms linking this initiative with health outcomes. Longitudinal survey data from 659 employees at a corporate headquarters shows that ROWE predicts changes in health-related behaviors, including almost an extra hour of sleep on work nights. Increasing employees' schedule control and reducing their work-family conflict are key mechanisms linking the ROWE innovation with changes in employees' health behaviors; they also predict changes in well-being measures, providing indirect links between ROWE and well-being. This study demonstrates that organizational changes in the structuring of time can promote employee wellness, particularly in terms of prevention behaviors.

Alcohol affects neuronal substrates of response inhibition but not of perceptual processing of stimuli signalling a stop response.

PubMed

Nikolaou, Kyriaki; Critchley, Hugo; Duka, Theodora

2013-01-01

Alcohol impairs inhibitory control, including the ability to terminate an initiated action. While there is increasing knowledge about neural mechanisms involved in response inhibition, the level at which alcohol impairs such mechanisms remains poorly understood. Thirty-nine healthy social drinkers received either 0.4 g/kg or 0.8 g/kg of alcohol, or placebo, and performed two variants of a Visual Stop-signal task during acquisition of functional magnetic resonance imaging (fMRI) data. The two task variants differed only in their instructions: in the classic variant (VSST), participants inhibited their response to a "Go-stimulus" when it was followed by a "Stop-stimulus". In the control variant (VSST_C), participants responded to the "Go-stimulus" even if it was followed by a "Stop-stimulus". Comparison of successful Stop-trials (Sstop)>Go, and unsuccessful Stop-trials (Ustop)>Sstop between the three beverage groups enabled the identification of alcohol effects on functional neural circuits supporting inhibitory behaviour and error processing. Alcohol impaired inhibitory control as measured by the Stop-signal reaction time, but did not affect other aspects of VSST performance, nor performance on the VSST_C. The low alcohol dose evoked changes in neural activity within prefrontal, temporal, occipital and motor cortices. The high alcohol dose evoked changes in activity in areas affected by the low dose but importantly induced changes in activity within subcortical centres including the globus pallidus and thalamus. Alcohol did not affect neural correlates of perceptual processing of infrequent cues, as revealed by conjunction analyses of VSST and VSST_C tasks. Alcohol ingestion compromises the inhibitory control of action by modulating cortical regions supporting attentional, sensorimotor and action-planning processes. At higher doses the impact of alcohol also extends to affect subcortical nodes of fronto-basal ganglia- thalamo-cortical motor circuits. In contrast, alcohol appears to have little impact on the early visual processing of infrequent perceptual cues. These observations clarify clinically-important effects of alcohol on behaviour.

Differential influence of safe versus threatening facial expressions on decision-making during an inhibitory control task in adolescence and adulthood.

PubMed

Cohen-Gilbert, J E; Killgore, W D S; White, C N; Schwab, Z J; Crowley, D J; Covell, M J; Sneider, J T; Silveri, M M

2014-03-01

Social cognition matures dramatically during adolescence and into early adulthood, supported by continued improvements in inhibitory control. During this time, developmental changes in interpreting and responding to social signals such as facial expressions also occur. In the present study, subjects performed a Go No-Go task that required them to respond or inhibit responding based on threat or safety cues present in facial expressions. Subjects (N = 112) were divided into three age groups: adolescent (12-15 years), emerging adult (18-25 years) and adult (26-44 years). Analyses revealed a significant improvement in accuracy on No-Go trials, but not Go trials, during both safe and threat face conditions, with changes evident through early adulthood. In order to better identify the decision-making processes responsible for these changes in inhibitory control, a drift diffusion model (DDM) was fit to the accuracy and reaction time data, generating measures of caution, response bias, nondecision time (encoding + motor response), and drift rate (face processing efficiency). Caution and nondecision time both increased significantly with age while bias towards the Go response decreased. Drift rate analyses revealed significant age-related improvements in the ability to map threat faces to a No-Go response while drift rates on all other trial types were equivalent across age groups. These results suggest that both stimulus-independent and stimulus-dependent processes contribute to improvements in inhibitory control in adolescence with processing of negative social cues being specifically impaired by self-regulatory demands. Findings from this novel investigation of emotional responsiveness integrated with inhibitory control may provide useful insights about healthy development that can be applied to better understand adolescent risk-taking behavior and the elevated incidence of related forms of psychopathology during this period of life. © 2014 John Wiley & Sons Ltd.

Controls on terrestrial carbon feedbacks by productivity versus turnover in the CMIP5 Earth System Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koven, C. D.; Chambers, J. Q.; Georgiou, K.

To better understand sources of uncertainty in projections of terrestrial carbon cycle feedbacks, we present an approach to separate the controls on modeled carbon changes. We separate carbon changes into four categories using a linearized, equilibrium approach: those arising from changed inputs (productivity-driven changes), and outputs (turnover-driven changes), of both the live and dead carbon pools. Using Coupled Model Intercomparison Project Phase 5 (CMIP5) simulations for five models, we find that changes to the live pools are primarily explained by productivity-driven changes, with only one model showing large compensating changes to live carbon turnover times. For dead carbon pools, themore » situation is more complex as all models predict a large reduction in turnover times in response to increases in productivity. This response arises from the common representation of a broad spectrum of decomposition turnover times via a multi-pool approach, in which flux-weighted turnover times are faster than mass-weighted turnover times. This leads to a shift in the distribution of carbon among dead pools in response to changes in inputs, and therefore a transient but long-lived reduction in turnover times. Since this behavior, a reduction in inferred turnover times resulting from an increase in inputs, is superficially similar to priming processes, but occurring without the mechanisms responsible for priming, we call the phenomenon "false priming", and show that it masks much of the intrinsic changes to dead carbon turnover times as a result of changing climate. These patterns hold across the fully coupled, biogeochemically coupled, and radiatively coupled 1 % yr −1 increasing CO 2 experiments. We disaggregate inter-model uncertainty in the globally integrated equilibrium carbon responses to initial turnover times, initial productivity, fractional changes in turnover, and fractional changes in productivity. For both the live and dead carbon pools, inter-model spread in carbon changes arising from initial conditions is dominated by model disagreement on turnover times, whereas inter-model spread in carbon changes from fractional changes to these terms is dominated by model disagreement on changes to productivity in response to both warming and CO 2 fertilization. However, the lack of changing turnover time control on carbon responses, for both live and dead carbon pools, in response to the imposed forcings may arise from a common lack of process representation behind changing turnover times (e.g., allocation and mortality for live carbon; permafrost, microbial dynamics, and mineral stabilization for dead carbon), rather than a true estimate of the importance of these processes.« less

Controls on terrestrial carbon feedbacks by productivity versus turnover in the CMIP5 Earth System Models

DOE PAGES

Koven, C. D.; Chambers, J. Q.; Georgiou, K.; ...

2015-09-07

To better understand sources of uncertainty in projections of terrestrial carbon cycle feedbacks, we present an approach to separate the controls on modeled carbon changes. We separate carbon changes into four categories using a linearized, equilibrium approach: those arising from changed inputs (productivity-driven changes), and outputs (turnover-driven changes), of both the live and dead carbon pools. Using Coupled Model Intercomparison Project Phase 5 (CMIP5) simulations for five models, we find that changes to the live pools are primarily explained by productivity-driven changes, with only one model showing large compensating changes to live carbon turnover times. For dead carbon pools, themore » situation is more complex as all models predict a large reduction in turnover times in response to increases in productivity. This response arises from the common representation of a broad spectrum of decomposition turnover times via a multi-pool approach, in which flux-weighted turnover times are faster than mass-weighted turnover times. This leads to a shift in the distribution of carbon among dead pools in response to changes in inputs, and therefore a transient but long-lived reduction in turnover times. Since this behavior, a reduction in inferred turnover times resulting from an increase in inputs, is superficially similar to priming processes, but occurring without the mechanisms responsible for priming, we call the phenomenon "false priming", and show that it masks much of the intrinsic changes to dead carbon turnover times as a result of changing climate. These patterns hold across the fully coupled, biogeochemically coupled, and radiatively coupled 1 % yr −1 increasing CO 2 experiments. We disaggregate inter-model uncertainty in the globally integrated equilibrium carbon responses to initial turnover times, initial productivity, fractional changes in turnover, and fractional changes in productivity. For both the live and dead carbon pools, inter-model spread in carbon changes arising from initial conditions is dominated by model disagreement on turnover times, whereas inter-model spread in carbon changes from fractional changes to these terms is dominated by model disagreement on changes to productivity in response to both warming and CO 2 fertilization. However, the lack of changing turnover time control on carbon responses, for both live and dead carbon pools, in response to the imposed forcings may arise from a common lack of process representation behind changing turnover times (e.g., allocation and mortality for live carbon; permafrost, microbial dynamics, and mineral stabilization for dead carbon), rather than a true estimate of the importance of these processes.« less

Mechanisms Controlling the Interannual Variation of Mixed Layer Temperature Averaged over the Nino-3 Region

NASA Technical Reports Server (NTRS)

Kim, Seung-Bum; Lee, Tong; Fukumori, Ichiro

2007-01-01

The present study examines processes governing the interannual variation of MLT in the eastern equatorial Pacific.Processes controlling the interannual variation of mixed layer temperature (MLT) averaged over the Nino-3 domain (5 deg N-5 deg S, 150 deg-90 deg W) are studied using an ocean data assimilation product that covers the period of 1993-2003. The overall balance is such that surface heat flux opposes the MLT change but horizontal advection and subsurface processes assist the change. Advective tendencies are estimated here as the temperature fluxes through the domain's boundaries, with the boundary temperature referenced to the domain-averaged temperature to remove the dependence on temperature scale. This allows the authors to characterize external advective processes that warm or cool the water within the domain as a whole. The zonal advective tendency is caused primarily by large-scale advection of warm-pool water through the western boundary of the domain. The meridional advective tendency is contributed to mostly by Ekman current advecting large-scale temperature anomalies through the southern boundary of the domain. Unlike many previous studies, the subsurface processes that consist of vertical mixing and entrainment are explicitly evaluated. In particular, a rigorous method to estimate entrainment allows an exact budget closure. The vertical mixing across the mixed layer (ML) base has a contribution in phase with the MLT change. The entrainment tendency due to the temporal change in ML depth is negligible compared to other subsurface processes. The entrainment tendency by vertical advection across the ML base is dominated by large-scale changes in upwelling and the temperature of upwelling water. Tropical instability waves (TIWs) result in smaller-scale vertical advection that warms the domain during La Nina cooling events. However, such a warming tendency is overwhelmed by the cooling tendency associated with the large-scale upwelling by a factor of 2. In summary, all the balance terms are important in the MLT budget except the entrainment due to lateral induction and temporal variation in ML depth. All three advective tendencies are primarily caused by large-scale and low-frequency processes, and they assist the Nino-3 MLT change.

Is Cycloxygenase-2 (COX-2) a Major Component of the Mechanism Responsible for Microvascular Remodeling in the Brain?

NASA Astrophysics Data System (ADS)

LaManna, Joseph C.; Sun, Xiaoyan; Ivy, Andre D.; Ward, Nicole L.

We have used a relatively simple model of hypoxia that triggers adaptive structural changes in the cerebral microvasculature to study the process of physiological angiogenesis. This model can be used to obtain mechanistic data for the processes that probably underlie the dynamic structural changes that occur in learning and the control of oxygen availability to the neurovascular unit. These mechanisms are broadly involved in a wide variety of pathophysiological processes. This is the vascular component to CNS functional plasticity, supporting learning and adaptation. The angiogenic process may wane with age, contributing to the decreasing ability to survive metabolic stress and the diminution of neuronal plasticity.

The association between hypertension-specific care management processes and blood pressure outcomes in US-based physician organizations.

PubMed

Wong, Ken; Smalarz, Amy; Wu, Ning; Boulanger, Luke; Wogen, Jenifer

2011-01-01

Care management processes (CMP) may be implemented in health systems to improve chronic disease quality of care. The objective of this study was to assess the relationship between the presence of hypertension-specific CMP and blood pressure (BP) control among hypertensive patients within selected physician organizations in the USA-modified version of the Physician Practice Connection Readiness Survey (PPC-RS), developed by The National Committee for Quality Assurance (NCQA), was administered to chief medical officers at 28 US-based physician organizations in 2010. Hypertension-specific survey items were added to the PPC-RS and focused on medication fill compliance, chronic disease management, and patient self-management. Demographic and clinical cross-sectional data from a random sample of 300 hypertensive patients age 18 years or older were collected at each site. Physician site and patient characteristics were reported. Regression models were used to assess the relationship between hypertension-specific physician practices and patient BP control. Eligible patients had at least a 1-year history of care with the physician organization and had an encounter within the past year of data collection. Of the 28 participating sites, most had electronic medical records that handle total functionality (71.4%) and had more than 50 staff members (78.6%). Across all sites, approximately 61% of patients had controlled BP. Regression analyses found that practices that used physician education as an effort to improve medication fill compliance demonstrated improvement in BP control (changes in systolic BP: beta coefficient = -1.366, P = .034; changes in diastolic BP: beta coefficient = -0.859, P = .056). The use of a systematic process to screen or assess patients for hypertension as a risk factor was also found to be associated with improvements in BP control (changes in diastolic BP: beta coefficient = -0.860, P = .006). In addition, physician practices that maintained a list of hypertensive patients along with the patients' associated clinical data demonstrated better BP control (currently controlled BP: beta coefficient = 0.282, P = .034; currently uncontrolled BP: beta coefficient = -0.292, P = .023). However, use of the following practices had a negative correlation with BP control: case management (changes in systolic BP: beta coefficient 1.649, P = .022; changes in diastolic BP: beta coefficient = 0.910, P = .078), follow-up for missed appointments (changes in systolic BP: beta coefficient = 0.937, P = .041; changes in diastolic BP: beta coefficient = 0.165, P = .627), adopted written evidence-based standards of care to treat hypertension (changes in systolic BP: beta coefficient = 0.985, P = .032; changes in diastolic BP: beta coefficient = 0.346, P = .305), and checklists for tests and interventions (changes in systolic BP: beta coefficient = 1.586, P = .004; changes in diastolic BP: beta coefficient = 0.938, P = .019). Findings from this multisite study provide evidence that the presence of some hypertension-specific CMP in physician organizations may be associated with better BP outcomes among hypertensive patients. In particular, patients may benefit from physician efforts to improve medication fill compliance as well as organizational monitoring of hypertensive patients and their clinical data. Further research is warranted to better assess the relationship between CMP and treatment of chronic diseases such as hypertension over time. Copyright © 2011 American Society of Hypertension. Published by Elsevier Inc. All rights reserved.

Results of an integrated structure/control law design sensitivity analysis

NASA Technical Reports Server (NTRS)

Gilbert, Michael G.

1989-01-01

A design sensitivity analysis method for Linear Quadratic Cost, Gaussian (LQG) optimal control laws, which predicts change in the optimal control law due to changes in fixed problem parameters using analytical sensitivity equations is discussed. Numerical results of a design sensitivity analysis for a realistic aeroservoelastic aircraft example are presented. In this example, the sensitivity of the optimally controlled aircraft's response to various problem formulation and physical aircraft parameters is determined. These results are used to predict the aircraft's new optimally controlled response if the parameter was to have some other nominal value during the control law design process. The sensitivity results are validated by recomputing the optimal control law for discrete variations in parameters, computing the new actual aircraft response, and comparing with the predicted response. These results show an improvement in sensitivity accuracy for integrated design purposes over methods which do not include changes in the optimal control law. Use of the analytical LQG sensitivity expressions is also shown to be more efficient than finite difference methods for the computation of the equivalent sensitivity information.

Self-efficacy, action control, and social support explain physical activity changes among Costa Rican older adults.

PubMed

Reyes Fernández, Benjamin; Montenegro Montenegro, Esteban; Knoll, Nina; Schwarzer, Ralf

2014-11-01

Self-efficacy, action control, and social support are considered to influence changes in physical activity levels in older adults. This study examines the relationship among these variables and explores the putative mediating and moderating mechanisms that might account for activity changes. A longitudinal study with 54 older adults (≥ 50 years of age) was carried out in Costa Rica. In a moderated mediation analysis, action control was specified as a mediator between self-efficacy and physical activity, whereas social support was specified as a moderator between self-efficacy and action control. Baseline physical activity, age, and sex were specified as covariates. Action control mediated between self-efficacy and physical activity. An interaction between social support and self-efficacy on action control pointed to a synergistic effect at the first stage of the mediating process. The effect of self-efficacy on physical activity was partly explained by action control, providing evidence of action control as a proximal mediator of physical activity. Moreover, the moderator role of social support was confirmed: high social support appeared to compensate for low levels of self-efficacy.

40 CFR 63.1368 - Reporting requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... operating permit. (B) Duration of excursions, as defined in § 63.1366(b)(7). (C) Operating logs and... storage vessel subject to control requirements: (A) Actual periods of planned routine maintenance during... process, as defined in § 63.1361. (i) A brief description of the process change; (ii) A description of any...

Replacing Coercive Power with Relationship Power

ERIC Educational Resources Information Center

Boldt, Randal W.; Witzel, Melanie; Russell, Chuck; Jones, Van

2007-01-01

A long-established agency for troubled children was following a philosophy based on behavioral control and treatment of pathology. As staff examined their beliefs about the process of change, the climate evolved from enforcing behavior control to empowering youth to develop positive strengths. A charter school was created and new behavior…

Error Processing and Gender-Shared and -Specific Neural Predictors of Relapse in Cocaine Dependence

ERIC Educational Resources Information Center

Luo, Xi; Zhang, Sheng; Hu, Sien; Bednarski, Sarah R.; Erdman, Emily; Farr, Olivia M.; Hong, Kwang-Ik; Sinha, Rajita; Mazure, Carolyn M.; Li, Chiang-shan R.

2013-01-01

Deficits in cognitive control are implicated in cocaine dependence. Previously, combining functional magnetic resonance imaging and a stop signal task, we demonstrated altered cognitive control in cocaine-dependent individuals. However, the clinical implications of these cross-sectional findings and, in particular, whether the changes were…

Empiric validation of a process for behavior change.

PubMed

Elliot, Diane L; Goldberg, Linn; MacKinnon, David P; Ranby, Krista W; Kuehl, Kerry S; Moe, Esther L

2016-09-01

Most behavior change trials focus on outcomes rather than deconstructing how those outcomes related to programmatic theoretical underpinnings and intervention components. In this report, the process of change is compared for three evidence-based programs' that shared theories, intervention elements and potential mediating variables. Each investigation was a randomized trial that assessed pre- and post- intervention variables using survey constructs with established reliability. Each also used mediation analyses to define relationships. The findings were combined using a pattern matching approach. Surprisingly, knowledge was a significant mediator in each program (a and b path effects [p<0.01]). Norms, perceived control abilities, and self-monitoring were confirmed in at least two studies (p<0.01 for each). Replication of findings across studies with a common design but varied populations provides a robust validation of the theory and processes of an effective intervention. Combined findings also demonstrate a means to substantiate process aspects and theoretical models to advance understanding of behavior change.

Early visual cortical structural changes in diabetic patients without diabetic retinopathy.

PubMed

Ferreira, Fábio S; Pereira, João M S; Reis, Aldina; Sanches, Mafalda; Duarte, João V; Gomes, Leonor; Moreno, Carolina; Castelo-Branco, Miguel

2017-11-01

It is known that diabetic patients have changes in cortical morphometry as compared to controls, but it remains to be clarified whether the visual cortex is a disease target, even when diabetes complications such as retinopathy are absent. Therefore, we compared type 2 diabetes patients without diabetic retinopathy with control subjects using magnetic resonance imaging to assess visual cortical changes when retinal damage is not yet present. We performed T1-weighted imaging in 24 type 2 diabetes patients without diabetic retinopathy and 27 age- and gender-matched controls to compare gray matter changes in the occipital cortex between groups using voxel based morphometry. Patients without diabetic retinopathy showed reduced gray matter volume in the occipital lobe when compared with controls. Reduced gray matter volume in the occipital cortex was found in diabetic patients without retinal damage. We conclude that cortical early visual processing regions may be affected in diabetic patients even before retinal damage occurs.

A neural network controller for automated composite manufacturing

NASA Technical Reports Server (NTRS)

Lichtenwalner, Peter F.

1994-01-01

At McDonnell Douglas Aerospace (MDA), an artificial neural network based control system has been developed and implemented to control laser heating for the fiber placement composite manufacturing process. This neurocontroller learns an approximate inverse model of the process on-line to provide performance that improves with experience and exceeds that of conventional feedback control techniques. When untrained, the control system behaves as a proportional plus integral (PI) controller. However after learning from experience, the neural network feedforward control module provides control signals that greatly improve temperature tracking performance. Faster convergence to new temperature set points and reduced temperature deviation due to changing feed rate have been demonstrated on the machine. A Cerebellar Model Articulation Controller (CMAC) network is used for inverse modeling because of its rapid learning performance. This control system is implemented in an IBM compatible 386 PC with an A/D board interface to the machine.

Environmental proteomics reveals taxonomic and functional changes in an enriched aquatic ecosystem.

PubMed

Northrop, Amanda C; Brooks, Rachel; Ellison, Aaron M; Gotelli, Nicholas J; Ballif, Bryan A

2017-10-01

Aquatic ecosystem enrichment can lead to distinct and irreversible changes to undesirable states. Understanding changes in active microbial community function and composition following organic-matter loading in enriched ecosystems can help identify biomarkers of such state changes. In a field experiment, we enriched replicate aquatic ecosystems in the pitchers of the northern pitcher plant, Sarracenia purpurea . Shotgun metaproteomics using a custom metagenomic database identified proteins, molecular pathways, and contributing microbial taxa that differentiated control ecosystems from those that were enriched. The number of microbial taxa contributing to protein expression was comparable between treatments; however, taxonomic evenness was higher in controls. Functionally active bacterial composition differed significantly among treatments and was more divergent in control pitchers than enriched pitchers. Aerobic and facultative anaerobic bacteria contributed most to identified proteins in control and enriched ecosystems, respectively. The molecular pathways and contributing taxa in enriched pitcher ecosystems were similar to those found in larger enriched aquatic ecosystems and are consistent with microbial processes occurring at the base of detrital food webs. Detectable differences between protein profiles of enriched and control ecosystems suggest that a time series of environmental proteomics data may identify protein biomarkers of impending state changes to enriched states.

Impacts of tropical deforestation. Part I: Process analysis of local climatic change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, H.; Henderson-Sellers, A.; McGuffie, K.

1996-07-01

The potential impacts of deforestation in the humid Tropics are examined using a version of the National Center for Atmospheric Research`s CCM1 coupled with the Biosphere-Atmosphere Transfer Scheme package. Tropical deforestation in South America, Africa, and Southeast Asia is studied using the results from an 11-yr deforestation experiment and a 25-yr control integration. It is found that the local-scale impact (here defined as within the area deforested) varies greatly between the three deforested regions due to the differing controls on the local atmospheric circulation: the Southeast Asian monsoon is much less sensitive to deforestation than the low-level flow over Southmore » America. The analysis of the changes in cloud radiative forcing suggests that reduction in cloud amount can significantly mitigate the imposed increases in surface albedo. The importance of water recycling by the forest canopy is stressed in the simulation of local precipitation changes. Correlation analysis of the changes resulting from the deforestation has been used to determine the nature of the processes that follow from the removal of the forest canopy and to suggest the important processes. The role of large-scale dynamics is explored in a companion paper. 44 refs., 9 figs., 5 tabs.« less

Root induced changes of effective 1D hydraulic properties in a soil column.

PubMed

Scholl, P; Leitner, D; Kammerer, G; Loiskandl, W; Kaul, H-P; Bodner, G

Roots are essential drivers of soil structure and pore formation. This study aimed at quantifying root induced changes of the pore size distribution (PSD). The focus was on the extent of clogging vs. formation of pores during active root growth. Parameters of Kosugi's lognormal PSD model were determined by inverse estimation in a column experiment with two cover crops (mustard, rye) and an unplanted control. Pore dynamics were described using a convection-dispersion like pore evolution model. Rooted treatments showed a wider range of pore radii with increasing volumes of large macropores >500 μm and micropores <2.5 μm, while fine macropores, mesopores and larger micropores decreased. The non-rooted control showed narrowing of the PSD and reduced porosity over all radius classes. The pore evolution model accurately described root induced changes, while structure degradation in the non-rooted control was not captured properly. Our study demonstrated significant short term root effects with heterogenization of the pore system as dominant process of root induced structure formation. Pore clogging is suggested as a partial cause for reduced pore volume. The important change in micro- and large macropores however indicates that multiple mechanic and biochemical processes are involved in root-pore interactions.

Using organic matter gradients to predict mercury cycling following environmental changes

NASA Astrophysics Data System (ADS)

Bjorn, E.; Bravo, A. G.; Jonsson, S.; Seelen, E.; Skrobonja, A.; Skyllberg, U.; Soerensen, A.; Zhu, W.

2017-12-01

The biogeochemical cycling of mercury (Hg) includes redox and methylation transformation reactions, largely mediated by microorganisms. These reactions are decisive for mobility and bioavailability of Hg in ecosystems. Organic matter (OM) plays several critical roles in these important transformation reactions. In many aquatic systems, the composition of OM is naturally diverse and dynamic, and subject to further alternations due to ecosystem changes induced by climate, eutrophication, land use, and industrial activities. We will present recent findings on how changing characteristics of OM along natural salinity and carbon gradients control Hg methylation and reduction reactions, as well as bioaccumulation processes. We will further discuss potential changes to Hg cycling, primarily in coastal seas, following ecosystem perturbations which alter the amount and characteristics of OM. The presentation will focus on recent research advancements describing how: (i) the binding of Hg to thiol functional groups in OM controls the chemical speciation of Hg, and thereby its availability for chemical reactions and uptake in biota, (ii) the composition of OM is a primary controlling factor for methylation and reduction rates of divalent Hg by electron donation and shuttling processes, (iii) the amount and characteristics of dissolved OM affect the structure and productivity of the pelagic food web, and thereby the biomagnification of methylmercury.

Ambiguous meanings of projects as facilitators of sensegiving.

PubMed

Lunkka, Nina; Suhonen, Marjo

2015-10-01

To describe mid-level nurse managers' experiences of sensegiving in the context of hospital projects. Sensegiving is about shaping and affecting how employees see themselves, their work and issues related to their work. It has been little studied in the context of hospital projects from mid-level nurse managers' point of view. Mid-level nurse managers (n = 10) were interviewed about their experiences of projects from the viewpoint of sensegiving during change processes. Data was analysed using discourse analysis. Three repertoires were constructed from the data: the repertoires of regeneration, control and humane. Projects were considered as appropriate ways for sensegiving in hospitals from the viewpoint of mid-level nurse managers. In order to use projects effectively in hospitals as means for change management mid-level nurse managers ought to enhance their role as interpreters during the change process (i.e. strengthen their visioning, talk and dialogue skills). Training on the nature of change as a social and interactive process could deepen mid-level nurse managers' understanding of the change process in the context of hospital projects. © 2014 John Wiley & Sons Ltd.

Atmospheric System Research Marine Low Clouds Workshop Report, January 27-29,2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jensen, M.; Wang, J.; Wood, R.

Marine low clouds are a major determinant of the Earth?s albedo and are a major source of uncertainty in how the climate responds to changing greenhouse gas levels and anthropogenic aerosol. Marine low clouds are particularly difficult to simulate accurately in climate models, and their remote locations present a significant observational challenge. A complex set of interacting controlling processes determine the coverage, condensate loading, and microphysical and radiative properties of marine low clouds. Marine low clouds are sensitive to atmospheric aerosol in several ways. Interactions at microphysical scales involve changes in the concentration of cloud droplets and precipitation, which inducemore » cloud dynamical impacts including changes in entrainment and mesoscale organization. Marine low clouds are also impacted by atmospheric heating changes due to absorbing aerosols. The response of marine low clouds to aerosol perturbations depends strongly upon the unperturbed aerosol-cloud state, which necessitates greater understanding of processes controlling the budget of aerosol in the marine boundary layer. Entrainment and precipitation mediate the response of low clouds to aerosols but these processes also play leading roles in controlling the aerosol budget. The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) Climate Research Facility and Atmospheric System Research (ASR) program are making major recent investments in observational data sets from fixed and mobile sites dominated by marine low clouds. This report provides specific action items for how these measurements can be used together with process modeling to make progress on understanding and quantifying the key cloud and aerosol controlling processes in the next 5-10 years. Measurements of aerosol composition and its variation with particle size are needed to advance a quantitative, process-level understanding of marine boundary-layer aerosol budget. Quantitative precipitation estimates that combine radar and lidar measurements are becoming available, and these could be used to test process models, quantify precipitation responses to aerosol, and constrain climate models. Models and observations can be used to constrain how clouds respond dynamically to changing precipitation. New measurements of turbulence from ground-based remote sensing could be used to attempt to relate entrainment to the vertical and horizontal structure of turbulence in the boundary layer. Cloud-top entrainment plays a major role in modulating how low clouds respond to both aerosols and to greenhouse gases, so investment in promising new observational estimates would be beneficial. Precipitation formation and radiative cooling both help marine low clouds to organize on the mesoscale. More work is needed to develop metrics to characterize mesoscale organization, to elucidate mechanisms that determine the type and spatial scale of mesoscale cellular convection, and to understand the role of mesoscale structures in the stratocumulus-to-cumulus transition.« less

Response of plant community structure and primary productivity to experimental drought and flooding in an Alaskan fen

Treesearch

Amber C. Churchill; Merritt R. Turetsky; A. David McGuire; Teresa N. Hollingsworth

2015-01-01

Northern peatlands represent a long-term net sink for atmospheric CO2, but these ecosystems can shift from net carbon (C) sinks to sources based on changing climate and environmental conditions. In particular, changes in water availability associated with climate control peatland vegetation and carbon uptake processes. We examined the influence of changing hydrology on...

Climate and land use controls over terrestrial water use efficiency in monsoon Asia.

Treesearch

Hanqin Tian; Chaoqun Lu; Guangsheng Chen; Xiaofeng Xu; Mingliang Liu; et al

2011-01-01

Much concern has been raised regarding how and to what extent climate change and intensive human activities have altered water use efficiency (WUE, amount of carbon uptake per unit of water use) in monsoon Asia. By using a process-based ecosystem model [dynamic land ecosystem model (DLEM)], we examined effects of climate change, land use/cover change, and land...

Geochemical cycles of atmospheric gases

NASA Technical Reports Server (NTRS)

Walker, J. C. G.; Drever, J. I.

1988-01-01

The processes that control the atmosphere and atmospheric changes are reviewed. The geochemical cycles of water vapor, nitrogen, carbon dioxide, oxygen, and minor atmospheric constituents are examined. Changes in atmospheric chemistry with time are discussed using evidence from the rock record and analysis of the present atmosphere. The role of biological evolution in the history of the atmosphere and projected changes in the future atmosphere are considered.

Neural differences between the processing of musical meaning conveyed by direction of pitch change and natural music in congenital amusia.

PubMed

Zhou, Linshu; Liu, Fang; Jing, Xiaoyi; Jiang, Cunmei

2017-02-01

Music is a unique communication system for human beings. Iconic musical meaning is one dimension of musical meaning, which emerges from musical information resembling sounds of objects, qualities of objects, or qualities of abstract concepts. The present study investigated whether congenital amusia, a disorder of musical pitch perception, impacts the processing of iconic musical meaning. With a cross-modal semantic priming paradigm, target images were primed by semantically congruent or incongruent musical excerpts, which were characterized by direction (upward or downward) of pitch change (Experiment 1), or were selected from natural music (Experiment 2). Twelve Mandarin-speaking amusics and 12 controls performed a recognition (implicit) and a semantic congruency judgment (explicit) task while their EEG waveforms were recorded. Unlike controls, amusics failed to elicit an N400 effect when musical meaning was represented by direction of pitch change, regardless of the nature of the tasks (implicit versus explicit). However, the N400 effect in response to musical meaning in natural musical excerpts was observed for both the groups in both types of tasks. These results indicate that amusics are able to process iconic musical meaning through multiple acoustic cues in natural musical excerpts, but not through the direction of pitch change. This is the first study to investigate the processing of musical meaning in congenital amusia, providing evidence in support of the "melodic contour deafness hypothesis" with regard to iconic musical meaning processing in this disorder. Copyright © 2017 Elsevier Ltd. All rights reserved.

The effects of early post-hatching changes of imprinting object on the pattern of monocular/unihemispheric sleep of domestic chicks.

PubMed

Bobbo, Daniela; Vallortigara, Giorgio; Mascetti, Gian Gastone

2006-06-03

The pattern of monocular/unihemispheric sleep (Mo-Un sleep) was studied behaviourally in male and female chicks after early post-hatching changes of the imprinting object. Chicks were reared with an imprinting object on day 1 post-hatching which was removed or changed on day 2. On day 1, time spent in binocular sleep (both eyes closed) was similar in male and female chicks, though the number of episodes was lower in females than in males. There was no eye-closure bias in the pattern of Mo-Un sleep (one eye shut and the other open) in chicks of both sexes. On day 2, chicks subjected to the removal of imprinting object showed less time and number of episodes of binocular sleep than control chicks and chicks subjected to changes of imprinting object. There was no eye-closure bias in control chicks whilst a significant bias for more right Mo-Un sleep was recorded in chicks after removal and changes of imprinting object of both sexes. It is suggested that the removal or changes of imprinting object would cause a decrease of binocular sleep and trigger processes associated to secondary imprinting involving the left hemisphere. The bias for more right Mo-Un sleep (right eye-closure) could be the by-product of consolidation processes of secondary imprinting memories in the left hemisphere and/or of more left eye-opening as a result of periodical awakening of right hemisphere to control the environment after a stressful condition such as the removal or change of imprinting object.

Pitting temporal against spatial integration in schizophrenic patients.

PubMed

Herzog, Michael H; Brand, Andreas

2009-06-30

Schizophrenic patients show strong impairments in visual backward masking possibly caused by deficits on the early stages of visual processing. The underlying aberrant mechanisms are not clearly understood. Spatial as well as temporal processing deficits have been proposed. Here, by combining a spatial with a temporal integration paradigm, we show further evidence that temporal but not spatial processing is impaired in schizophrenic patients. Eleven schizophrenic patients and ten healthy controls were presented with sequences composed of Vernier stimuli. Patients needed significantly longer presentation times for sequentially presented Vernier stimuli to reach a performance level comparable to that of healthy controls (temporal integration deficit). When we added spatial contextual elements to some of the Vernier stimuli, performance changed in a complex but comparable manner in patients and controls (intact spatial integration). Hence, temporal but not spatial processing seems to be deficient in schizophrenia.

Local processes and regional patterns - Interpreting a multi-decadal altimetry record of Greenland Ice Sheet changes

NASA Astrophysics Data System (ADS)

Csatho, B. M.; Schenk, A. F.; Babonis, G. S.; van den Broeke, M. R.; Kuipers Munneke, P.; van der Veen, C. J.; Khan, S. A.; Porter, D. F.

2016-12-01

This study presents a new, comprehensive reconstruction of Greenland Ice Sheet elevation changes, generated using the Surface Elevation And Change detection (SERAC) approach. 35-year long elevation-change time series (1980-2015) were obtained at more than 150,000 locations from observations acquired by NASA's airborne and spaceborne laser altimeters (ATM, LVIS, ICESat), PROMICE laser altimetry data (2007-2011) and a DEM covering the ice sheet margin derived from stereo aerial photographs (1970s-80s). After removing the effect of Glacial Isostatic Adjustment (GIA) and the elastic crustal response to changes in ice loading, the time series were partitioned into changes due to surface processes and ice dynamics and then converted into mass change histories. Using gridded products, we examined ice sheet elevation, and mass change patterns, and compared them with other estimates at different scales from individual outlet glaciers through large drainage basins, on to the entire ice sheet. Both the SERAC time series and the grids derived from these time series revealed significant spatial and temporal variations of dynamic mass loss and widespread intermittent thinning, indicating the complexity of ice sheet response to climate forcing. To investigate the regional and local controls of ice dynamics, we examined thickness change time series near outlet glacier grounding lines. Changes on most outlet glaciers were consistent with one or more episodes of dynamic thinning that propagates upstream from the glacier terminus. The spatial pattern of the onset, duration, and termination of these dynamic thinning events suggest a regional control, such as warming ocean and air temperatures. However, the intricate spatiotemporal pattern of dynamic thickness change suggests that, regardless of the forcing responsible for initial glacier acceleration and thinning, the response of individual glaciers is modulated by local conditions. We use statistical methods, such as principal component analysis and multivariate regression to analyze the dynamic ice-thickness change time series derived by SERAC and to investigate the primary forcings and controls on outlet glacier changes.

Visual processing of emotional expressions in mixed anxious-depressed subclinical state: an event-related potential study on a female sample.

PubMed

Rossignol, M; Philippot, P; Crommelinck, M; Campanella, S

2008-10-01

Controversy remains about the existence and the nature of a specific bias in emotional facial expression processing in mixed anxious-depressed state (MAD). Event-related potentials were recorded in the following three types of groups defined by the Spielberger state and trait anxiety inventory (STAI) and the Beck depression inventory (BDI): a group of anxious participants (n=12), a group of participants with depressive and anxious tendencies (n=12), and a control group (n=12). Participants were confronted with a visual oddball task in which they had to detect, as quickly as possible, deviant faces amongst a train of standard neutral faces. Deviant stimuli changed either on identity, or on emotion (happy or sad expression). Anxiety facilitated emotional processing and the two anxious groups produced quicker responses than control participants; these effects were correlated with an earlier decisional wave (P3b) for anxious participants. Mixed anxious-depressed participants showed enhanced visual processing of deviant stimuli and produced higher amplitude in attentional complex (N2b/P3a), both for identity and emotional trials. P3a was also particularly increased for emotional faces in this group. Anxious state mainly influenced later decision processes (shorter latency of P3b), whereas mixed anxious-depressed state acted on earlier steps of emotional processing (enhanced N2b/P3a complex). Mixed anxious-depressed individuals seemed more reactive to any visual change, particularly emotional change, without displaying any valence bias.

The Role of Executive Control and Readiness to Change in Problematic Drinkers with Mild to Borderline Intellectual Disability.

PubMed

van Duijvenbode, Neomi; Didden, Robert; Korzilius, Hubert P L M; Engels, Rutger C M E

2017-09-01

Problematic alcohol use is associated with neuropsychological consequences, including cognitive biases. The goal of the study was to explore the moderating role of executive control and readiness to change on the relationship between alcohol use and cognitive biases in light and problematic drinkers with and without mild to borderline intellectual disability (MBID). Participants (N = 112) performed the visual dot probe task to measure the strength of the cognitive biases. Executive control was measured using two computerised tasks for working memory capacity (Corsi block-tapping task) and inhibitory control (Go/No-go task). Readiness to change was measured using the Readiness to Change Questionnaire. No cognitive biases or executive dysfunctions were found in problematic drinkers. Working memory capacity and inhibitory control were impaired among individuals with MBID, irrespective of severity of alcohol use-related problems. Executive control and readiness to change did not moderate the relationship between alcohol use and cognitive biases. The results fail to support the dual-process models of addiction, but results need to be treated with caution given the problematic psychometric qualities of the visual dot probe task. Implementing a neurocognitive assessment and protocols in the treatment of substance use disorders seems premature. © 2016 John Wiley & Sons Ltd.

Real-time feedback control of twin-screw wet granulation based on image analysis.

PubMed

Madarász, Lajos; Nagy, Zsombor Kristóf; Hoffer, István; Szabó, Barnabás; Csontos, István; Pataki, Hajnalka; Démuth, Balázs; Szabó, Bence; Csorba, Kristóf; Marosi, György

2018-06-04

The present paper reports the first dynamic image analysis-based feedback control of continuous twin-screw wet granulation process. Granulation of the blend of lactose and starch was selected as a model process. The size and size distribution of the obtained particles were successfully monitored by a process camera coupled with an image analysis software developed by the authors. The validation of the developed system showed that the particle size analysis tool can determine the size of the granules with an error of less than 5 µm. The next step was to implement real-time feedback control of the process by controlling the liquid feeding rate of the pump through a PC, based on the real-time determined particle size results. After the establishment of the feedback control, the system could correct different real-life disturbances, creating a Process Analytically Controlled Technology (PACT), which guarantees the real-time monitoring and controlling of the quality of the granules. In the event of changes or bad tendencies in the particle size, the system can automatically compensate the effect of disturbances, ensuring proper product quality. This kind of quality assurance approach is especially important in the case of continuous pharmaceutical technologies. Copyright © 2018 Elsevier B.V. All rights reserved.

Atypical vertical sound localization and sound-onset sensitivity in people with autism spectrum disorders.

PubMed

Visser, Eelke; Zwiers, Marcel P; Kan, Cornelis C; Hoekstra, Liesbeth; van Opstal, A John; Buitelaar, Jan K

2013-11-01

Autism spectrum disorders (ASDs) are associated with auditory hyper- or hyposensitivity; atypicalities in central auditory processes, such as speech-processing and selective auditory attention; and neural connectivity deficits. We sought to investigate whether the low-level integrative processes underlying sound localization and spatial discrimination are affected in ASDs. We performed 3 behavioural experiments to probe different connecting neural pathways: 1) horizontal and vertical localization of auditory stimuli in a noisy background, 2) vertical localization of repetitive frequency sweeps and 3) discrimination of horizontally separated sound stimuli with a short onset difference (precedence effect). Ten adult participants with ASDs and 10 healthy control listeners participated in experiments 1 and 3; sample sizes for experiment 2 were 18 adults with ASDs and 19 controls. Horizontal localization was unaffected, but vertical localization performance was significantly worse in participants with ASDs. The temporal window for the precedence effect was shorter in participants with ASDs than in controls. The study was performed with adult participants and hence does not provide insight into the developmental aspects of auditory processing in individuals with ASDs. Changes in low-level auditory processing could underlie degraded performance in vertical localization, which would be in agreement with recently reported changes in the neuroanatomy of the auditory brainstem in individuals with ASDs. The results are further discussed in the context of theories about abnormal brain connectivity in individuals with ASDs.

Compositional Stability of the Bacterial Community in a Climate-Sensitive Sub-Arctic Peatland.

PubMed

Weedon, James T; Kowalchuk, George A; Aerts, Rien; Freriks, Stef; Röling, Wilfred F M; van Bodegom, Peter M

2017-01-01

The climate sensitivity of microbe-mediated soil processes such as carbon and nitrogen cycling offers an interesting case for evaluating the corresponding sensitivity of microbial community composition to environmental change. Better understanding of the degree of linkage between functional and compositional stability would contribute to ongoing efforts to build mechanistic models aiming at predicting rates of microbe-mediated processes. We used an amplicon sequencing approach to test if previously observed large effects of experimental soil warming on C and N cycle fluxes (50-100% increases) in a sub-arctic Sphagnum peatland were reflected in changes in the composition of the soil bacterial community. We found that treatments that previously induced changes to fluxes did not associate with changes in the phylogenetic composition of the soil bacterial community. For both DNA- and RNA-based analyses, variation in bacterial communities could be explained by the hierarchy: spatial variation (12-15% of variance explained) > temporal variation (7-11%) > climate treatment (4-9%). We conclude that the bacterial community in this environment is stable under changing conditions, despite the previously observed sensitivity of process rates-evidence that microbe-mediated soil processes can alter without concomitant changes in bacterial communities. We propose that progress in linking soil microbial communities to ecosystem processes can be advanced by further investigating the relative importance of community composition effects versus physico-chemical factors in controlling biogeochemical process rates in different contexts.

Development of risk-based air quality management strategies under impacts of climate change.

PubMed

Liao, Kuo-Jen; Amar, Praveen; Tagaris, Efthimios; Russell, Armistead G

2012-05-01

Climate change is forecast to adversely affect air quality through perturbations in meteorological conditions, photochemical reactions, and precursor emissions. To protect the environment and human health from air pollution, there is an increasing recognition of the necessity of developing effective air quality management strategies under the impacts of climate change. This paper presents a framework for developing risk-based air quality management strategies that can help policy makers improve their decision-making processes in response to current and future climate change about 30-50 years from now. Development of air quality management strategies under the impacts of climate change is fundamentally a risk assessment and risk management process involving four steps: (1) assessment of the impacts of climate change and associated uncertainties; (2) determination of air quality targets; (3) selections of potential air quality management options; and (4) identification of preferred air quality management strategies that minimize control costs, maximize benefits, or limit the adverse effects of climate change on air quality when considering the scarcity of resources. The main challenge relates to the level of uncertainties associated with climate change forecasts and advancements in future control measures, since they will significantly affect the risk assessment results and development of effective air quality management plans. The concept presented in this paper can help decision makers make appropriate responses to climate change, since it provides an integrated approach for climate risk assessment and management when developing air quality management strategies. Development of climate-responsive air quality management strategies is fundamentally a risk assessment and risk management process. The risk assessment process includes quantification of climate change impacts on air quality and associated uncertainties. Risk management for air quality under the impacts of climate change includes determination of air quality targets, selections of potential management options, and identification of effective air quality management strategies through decision-making models. The risk-based decision-making framework can also be applied to develop climate-responsive management strategies for the other environmental dimensions and assess costs and benefits of future environmental management policies.

Clinical governance and operations management methodologies.

PubMed

Davies, C; Walley, P

2000-01-01

The clinical governance mechanism, introduced since 1998 in the UK National Health Service (NHS), aims to deliver high quality care with efficient, effective and cost-effective patient services. Scally and Donaldson recognised that new approaches are needed, and operations management techniques comprise potentially powerful methodologies in understanding the process of care, which can be applied both within and across professional boundaries. This paper summarises four studies in hospital Trusts which took approaches to improving process that were different from and less structured than business process re-engineering (BPR). The problems were then amenable to change at a relatively low cost and short timescale, producing significant improvement to patient care. This less structured approach to operations management avoided incurring overhead costs of large scale and costly change such as new information technology (IT) systems. The most successful changes were brought about by formal tools to control quantity, content and timing of changes.

Role of N-methyl-2-pyrrolidone for preparation of Fe3O4@SiO2 controlled the shell thickness

NASA Astrophysics Data System (ADS)

Wee, Sung-Bok; Oh, Hyeon-Cheol; Kim, Tae-Gyun; An, Gye-Seok; Choi, Sung-Churl

2017-04-01

We developed a simple and novel approach for the synthesis of Fe3O4@SiO2 nanoparticles with controlled shell thickness, and studied the mechanism. The introduction of N-methyl-2-pyrrolidone (NMP) led to trapping of monomer nuclei in single shell and controlled the shell thickness. Fe3O4@SiO2 controlled the shell thickness, showing a high magnetization value (64.47 emu/g). Our results reveal the role and change in the chemical structure of NMP during the core-shell synthesis process. NMP decomposed to 4-aminobutanoic acid in alkaline condition and decreased the hydrolysis rate of the silica coating process.

A chameleon-inspired stretchable electronic skin with interactive colour changing controlled by tactile sensing

PubMed Central

Chou, Ho-Hsiu; Nguyen, Amanda; Chortos, Alex; To, John W.F.; Lu, Chien; Mei, Jianguo; Kurosawa, Tadanori; Bae, Won-Gyu; Tok, Jeffrey B.-H.; Bao, Zhenan

2015-01-01

Some animals, such as the chameleon and cephalopod, have the remarkable capability to change their skin colour. This unique characteristic has long inspired scientists to develop materials and devices to mimic such a function. However, it requires the complex integration of stretchability, colour-changing and tactile sensing. Here we show an all-solution processed chameleon-inspired stretchable electronic skin (e-skin), in which the e-skin colour can easily be controlled through varying the applied pressure along with the applied pressure duration. As such, the e-skin's colour change can also be in turn utilized to distinguish the pressure applied. The integration of the stretchable, highly tunable resistive pressure sensor and the fully stretchable organic electrochromic device enables the demonstration of a stretchable electrochromically active e-skin with tactile-sensing control. This system will have wide range applications such as interactive wearable devices, artificial prosthetics and smart robots. PMID:26300307

A chameleon-inspired stretchable electronic skin with interactive colour changing controlled by tactile sensing.

PubMed

Chou, Ho-Hsiu; Nguyen, Amanda; Chortos, Alex; To, John W F; Lu, Chien; Mei, Jianguo; Kurosawa, Tadanori; Bae, Won-Gyu; Tok, Jeffrey B-H; Bao, Zhenan

2015-08-24

Some animals, such as the chameleon and cephalopod, have the remarkable capability to change their skin colour. This unique characteristic has long inspired scientists to develop materials and devices to mimic such a function. However, it requires the complex integration of stretchability, colour-changing and tactile sensing. Here we show an all-solution processed chameleon-inspired stretchable electronic skin (e-skin), in which the e-skin colour can easily be controlled through varying the applied pressure along with the applied pressure duration. As such, the e-skin's colour change can also be in turn utilized to distinguish the pressure applied. The integration of the stretchable, highly tunable resistive pressure sensor and the fully stretchable organic electrochromic device enables the demonstration of a stretchable electrochromically active e-skin with tactile-sensing control. This system will have wide range applications such as interactive wearable devices, artificial prosthetics and smart robots.

Ingredients and change processes in occupational therapy for children: a grounded theory study.

PubMed

Armitage, Samantha; Swallow, Veronica; Kolehmainen, Niina

2017-05-01

There is limited evidence about the effectiveness of occupational therapy interventions for participation outcomes in children with coordination difficulties. Developing theory about the interventions, i.e. their ingredients and change processes, is the first step to advance the evidence base. To develop theory about the key ingredients of occupational therapy interventions for children with coordination difficulties and the processes through which change in participation might happen. Grounded theory methodology, as described by Kathy Charmaz, was used to develop the theory. Children and parents participated in semi-structured interviews to share their experiences of occupational therapy and processes of change. Data collection and analysis were completed concurrently using constant comparison methods. Five key ingredients of interventions were described: performing activities and tasks; achieving; carer support; helping and supporting the child; and labelling. Ingredients related to participation by changing children's mastery experience, increasing capability beliefs and sense of control. Parents' knowledge, skills, positive emotions, sense of empowerment and capability beliefs also related to children's participation. The results identify intervention ingredients and change pathways within occupational therapy to increase participation. It is unclear how explicitly and often therapists consider and make use of these ingredients and pathway.

Machine learning and predictive data analytics enabling metrology and process control in IC fabrication

NASA Astrophysics Data System (ADS)

Rana, Narender; Zhang, Yunlin; Wall, Donald; Dirahoui, Bachir; Bailey, Todd C.

2015-03-01

Integrate circuit (IC) technology is going through multiple changes in terms of patterning techniques (multiple patterning, EUV and DSA), device architectures (FinFET, nanowire, graphene) and patterning scale (few nanometers). These changes require tight controls on processes and measurements to achieve the required device performance, and challenge the metrology and process control in terms of capability and quality. Multivariate data with complex nonlinear trends and correlations generally cannot be described well by mathematical or parametric models but can be relatively easily learned by computing machines and used to predict or extrapolate. This paper introduces the predictive metrology approach which has been applied to three different applications. Machine learning and predictive analytics have been leveraged to accurately predict dimensions of EUV resist patterns down to 18 nm half pitch leveraging resist shrinkage patterns. These patterns could not be directly and accurately measured due to metrology tool limitations. Machine learning has also been applied to predict the electrical performance early in the process pipeline for deep trench capacitance and metal line resistance. As the wafer goes through various processes its associated cost multiplies. It may take days to weeks to get the electrical performance readout. Predicting the electrical performance early on can be very valuable in enabling timely actionable decision such as rework, scrap, feedforward, feedback predicted information or information derived from prediction to improve or monitor processes. This paper provides a general overview of machine learning and advanced analytics application in the advanced semiconductor development and manufacturing.

A neuroimaging study of emotion-cognition interaction in schizophrenia: the effect of ziprasidone treatment.

PubMed

Stip, Emmanuel; Cherbal, Adel; Luck, David; Zhornitsky, Simon; Bentaleb, Lahcen Ait; Lungu, Ovidiu

2017-04-01

Functional and structural brain changes associated with the cognitive processing of emotional visual stimuli were assessed in schizophrenic patients after 16 weeks of antipsychotic treatment with ziprasidone. Forty-five adults aged 18 to 40 were recruited: 15 schizophrenia patients (DSM-IV criteria) treated with ziprasidone (mean daily dose = 120 mg), 15 patients treated with other antipsychotics, and 15 healthy controls who did not receive any medication. Functional and structural neuroimaging data were acquired at baseline and 16 weeks after treatment initiation. In each session, participants selected stimuli, taken from standardized sets, based on their emotional valence. After ziprasidone treatment, several prefrontal regions, typically involved in cognitive control (anterior cingulate and ventrolateral prefrontal cortices), were significantly activated in patients in response to positive versus negative stimuli. This effect was greater whenever they had to select negative compared to positive stimuli, indicating an asymmetric effect of cognitive treatment of emotionally laden information. No such changes were observed for patients under other antipsychotics. In addition, there was an increase in the brain volume commonly recruited by healthy controls and patients under ziprasidone, in response to cognitive processing of emotional information. The structural analysis showed no significant changes in the density of gray and white matter in ziprasidone-treated patients compared to patients receiving other antipsychotic treatments. Our results suggest that functional changes in brain activity after ziprasidone medication precede structural and clinical manifestations, as markers that the treatment is efficient in restoring the functionality of prefrontal circuits involved in processing emotionally laden information in schizophrenia.

The interaction of psychological and physiological homeostatic drives and role of general control principles in the regulation of physiological systems, exercise and the fatigue process - The Integrative Governor theory.

PubMed

St Clair Gibson, A; Swart, J; Tucker, R

2018-02-01

Either central (brain) or peripheral (body physiological system) control mechanisms, or a combination of these, have been championed in the last few decades in the field of Exercise Sciences as how physiological activity and fatigue processes are regulated. In this review, we suggest that the concept of 'central' or 'peripheral' mechanisms are both artificial constructs that have 'straight-jacketed' research in the field, and rather that competition between psychological and physiological homeostatic drives is central to the regulation of both, and that governing principles, rather than distinct physical processes, underpin all physical system and exercise regulation. As part of the Integrative Governor theory we develop in this review, we suggest that both psychological and physiological drives and requirements are underpinned by homeostatic principles, and that regulation of the relative activity of each is by dynamic negative feedback activity, as the fundamental general operational controller. Because of this competitive, dynamic interplay, we propose that the activity in all systems will oscillate, that these oscillations create information, and comparison of this oscillatory information with either prior information, current activity, or activity templates create efferent responses that change the activity in the different systems in a similarly dynamic manner. Changes in a particular system are always the result of perturbations occurring outside the system itself, the behavioural causative 'history' of this external activity will be evident in the pattern of the oscillations, and awareness of change occurs as a result of unexpected rather than planned change in physiological activity or psychological state.

The impact of pay-for-performance on quality of care for minority patients.

PubMed

Epstein, Arnold M; Jha, Ashish K; Orav, E John

2014-10-01

To determine whether racial disparities in process quality and outcomes of care change under hospital pay-for-performance. Retrospective cohort study comparing the change in racial disparities in process quality and outcomes of care between 2004 and 2008 in hospitals participating in the Premier Hospital Quality Incentive Demonstration versus control hospitals. Using patient-level Hospital Quality Alliance (HQA) data, we identified 226,096 patients in Premier hospitals, which were subject to pay-for-performance (P4P) contracts and 1,607,575 patients at control hospitals who had process of care measured during hospitalization for acute myocardial infarction (AMI), congestive heart failure (CHF), or pneumonia. We additionally identified 123,241 Medicare patients in Premier hospitals and 995,107 in controls who were hospitalized for AMI, CHF, pneumonia, or coronary artery bypass graft (CABG) surgery. We then compared HQA process quality indicators for AMI, CHF, and pneumonia between P4P and control hospitals, as well as risk-adjusted mortality rates for AMI, CHF, pneumonia, and CABG. Black patients initially had lower performance on process quality indicators in both Premier and non-Premier hospitals. The racial gap decreased over time in both groups; the reduction in the gap in Premier hospitals was greater than the gap reduction in non-Premier hospitals for AMI patients. During the study period, mortality generally decreased for blacks relative to whites for AMI, CHF, and pneumonia in both Premier and non-Premier hospitals, with the relative reduction for blacks greatest in Premier hospitals for CHF. Our results show no evidence of a deleterious impact of P4P in the Premier HQID on racial disparities in process quality or outcomes.

Influences of geomorphology and geology on alpine treeline in the American West - More important than climatic influences?

USGS Publications Warehouse

Butler, D.R.; Malanson, G.P.; Walsh, S.J.; Fagre, D.B.

2007-01-01

The spatial distribution and pattern of alpine treeline in the American West reflect the overarching influences of geological history, lithology and structure, and geomorphic processes and landforms, and geologic and geomorphic factors—both forms and processes—can control the spatiotemporal response of the ecotone to climate change. These influences occur at spatial scales ranging from the continental scale to fine scale processes and landforms at the slope scale. Past geomorphic influences, particularly Pleistocene glaciation, have also left their impact on treeline, and treelines across the west are still adjusting to post-Pleistocene conditions within Pleistocene-created landforms. Current fine scale processes include solifluction and changes on relict solifluction and digging by animals. These processes should be examined in detail in future studies to facilitate a better understanding of where individual tree seedlings become established as a primary response of the ecotone to climate change.

Deprivation selectively modulates brain potentials to food pictures.

PubMed

Stockburger, Jessica; Weike, Almut I; Hamm, Alfons O; Schupp, Harald T

2008-08-01

Event-related brain potentials (ERPs) were used to examine whether the processing of food pictures is selectively modulated by changes in the motivational state of the observer. Sixteen healthy male volunteers were tested twice 1 week apart, either after 24 hr of food deprivation or after normal food intake. ERPs were measured while participants viewed appetitive food pictures as well as standard emotional and neutral control pictures. Results show that the ERPs to food pictures in a hungry, rather than satiated, state were associated with enlarged positive potentials over posterior sensor sites in a time window of 170-310 ms poststimulus. Minimum-norm analysis suggests the enhanced processing of food cues primarily in occipito-temporo-parietal regions. In contrast, processing of standard emotional and neutral pictures was not modulated by food deprivation. Considered from the perspective of motivated attention, the selective change of food cue processing may reflect a state-dependent change in stimulus salience.

An Analysis of an Automatic Coolant Bypass in the International Space Station Node 2 Internal Active Thermal Control System

NASA Technical Reports Server (NTRS)

Clanton, Stephen E.; Holt, James M.; Turner, Larry D. (Technical Monitor)

2001-01-01

A challenging part of International Space Station (ISS) thermal control design is the ability to incorporate design changes into an integrated system without negatively impacting performance. The challenge presents itself in that the typical ISS Internal Active Thermal Control System (IATCS) consists of an integrated hardware/software system that provides active coolant resources to a variety of users. Software algorithms control the IATCS to specific temperatures, flow rates, and pressure differentials in order to meet the user-defined requirements. What may seem to be small design changes imposed on the system may in fact result in system instability or the temporary inability to meet user requirements. The purpose of this paper is to provide a brief description of the solution process and analyses used to implement one such design change that required the incorporation of an automatic coolant bypass in the ISS Node 2 element.

Age-related slowing of digit symbol substitution revisited: what do longitudinal age changes reflect?

PubMed

MacDonald, Stuart W S; Hultsch, David F; Strauss, Esther; Dixon, Roger A

2003-05-01

A previous investigation reported that cross-sectional age differences in Digit Symbol Substitution (DSS) test performance reflect declines in perceptual processing speed. Support for the tenability of the processing speed hypothesis requires examining whether longitudinal age-related change in DSS performance is largely mediated by changes in speed. The present study used data from the Victoria Longitudinal Study to examine patterns and predictors of longitudinal change in DSS for 512 older adults (M(age) = 68.37 years, SD = 7.43). On the basis of multilevel modeling, baseline DSS performance was poorer for older participants and men, with longitudinal declines more pronounced with increasing age and decreasing speed. In contrast to the present cross-sectional findings, statistical control of change trajectories in perceptual speed using the same data did not substantially attenuate age changes. These discrepancies suggest different sources of variance may underlie cross-sectional age differences and longitudinal age changes for DSS.

Complementary Tools to Empower and Sustain Behavior Change: Motivational Interviewing and Mindfulness.

PubMed

Sohl, Stephanie Jean; Birdee, Gurjeet; Elam, Roy

2016-11-01

Improving health behaviors is fundamental to preventing and controlling chronic disease. Healthcare providers who have a patient-centered communication style and appropriate behavioral change tools can empower patients to engage in and sustain healthy behaviors. This review highlights motivational interviewing and mindfulness along with other evidence-based strategies for enhancing patient-centered communication and the behavior change process. Motivational interviewing and mindfulness are especially useful for empowering patients to set self-determined, or autonomous, goals for behavior change. This is important because autonomously motivated behavioral change is more sustainable. Additional strategies such as self-monitoring are discussed as useful for supporting the implementation and maintenance of goals. Thus, there is a need for healthcare providers to develop such tools to empower sustained behavior change. The additional support of a new role, a health coach who specializes in facilitating the process of health-related behavior change, may be required to substantially impact public health.

Complementary Tools to Empower and Sustain Behavior Change: Motivational Interviewing and Mindfulness

PubMed Central

Sohl, Stephanie Jean; Birdee, Gurjeet; Elam, Roy

2015-01-01

Improving health behaviors is fundamental to preventing and controlling chronic disease. Healthcare providers who have a patient-centered communication style and appropriate behavioral change tools can empower patients to engage in and sustain healthy behaviors. This review highlights motivational interviewing and mindfulness along with other evidence-based strategies for enhancing patient-centered communication and the behavior change process. Motivational interviewing and mindfulness are especially useful for empowering patients to set self-determined, or autonomous, goals for behavior change. This is important because autonomously motivated behavioral change is more sustainable. Additional strategies such as self-monitoring are discussed as useful for supporting the implementation and maintenance of goals. Thus, there is a need for healthcare providers to develop such tools to empower sustained behavior change. The additional support of a new role, a health coach who specializes in facilitating the process of health-related behavior change, may be required to substantially impact public health. PMID:28239308

Defining the best quality-control systems by design and inspection.

PubMed

Hinckley, C M

1997-05-01

Not all of the many approaches to quality control are equally effective. Nonconformities in laboratory testing are caused basically by excessive process variation and mistakes. Statistical quality control can effectively control process variation, but it cannot detect or prevent most mistakes. Because mistakes or blunders are frequently the dominant source of nonconformities, we conclude that statistical quality control by itself is not effective. I explore the 100% inspection methods essential for controlling mistakes. Unlike the inspection techniques that Deming described as ineffective, the new "source" inspection methods can detect mistakes and enable corrections before nonconformities are generated, achieving the highest degree of quality at a fraction of the cost of traditional methods. Key relationships between task complexity and nonconformity rates are also described, along with cultural changes that are essential for implementing the best quality-control practices.

Adaptive model predictive process control using neural networks

DOEpatents

Buescher, K.L.; Baum, C.C.; Jones, R.D.

1997-08-19

A control system for controlling the output of at least one plant process output parameter is implemented by adaptive model predictive control using a neural network. An improved method and apparatus provides for sampling plant output and control input at a first sampling rate to provide control inputs at the fast rate. The MPC system is, however, provided with a network state vector that is constructed at a second, slower rate so that the input control values used by the MPC system are averaged over a gapped time period. Another improvement is a provision for on-line training that may include difference training, curvature training, and basis center adjustment to maintain the weights and basis centers of the neural in an updated state that can follow changes in the plant operation apart from initial off-line training data. 46 figs.

Adaptive model predictive process control using neural networks

DOEpatents

Buescher, Kevin L.; Baum, Christopher C.; Jones, Roger D.

1997-01-01

A control system for controlling the output of at least one plant process output parameter is implemented by adaptive model predictive control using a neural network. An improved method and apparatus provides for sampling plant output and control input at a first sampling rate to provide control inputs at the fast rate. The MPC system is, however, provided with a network state vector that is constructed at a second, slower rate so that the input control values used by the MPC system are averaged over a gapped time period. Another improvement is a provision for on-line training that may include difference training, curvature training, and basis center adjustment to maintain the weights and basis centers of the neural in an updated state that can follow changes in the plant operation apart from initial off-line training data.

Stream succession: Channel changes after wildfire disturbance

Treesearch

Nicholas E. Scheidt

2006-01-01

One concept in geomorphology is that vegetation is a fundamental control on sediment and water supplies to streams and, therefore, on downstream fluvial processes and channel morphology. Within this paradigm, wildfire has been implicated as a major driving force behind landscape erosion and changes to stream channels, periodically yielding pulses of sediment from...

A Comparison of Two Major Scientific Information Exchange Processes in Psychology: 1962 and 1976.

ERIC Educational Resources Information Center

Garvey, William D.; And Others

1984-01-01

Despite growing numbers of psychologists and of research reports presented at APA conventions and in core psychology journals, relatively few changes have occurred in the type of information presented. The stability of these media relates to quality control and the discouragement of rapid change in the discipline. (Author/GC)

A Proactive Model to Control Reactive Behaviors

ERIC Educational Resources Information Center

Dehnad, Vida

2017-01-01

Adaptation to change is not an easy process and sometimes does not happen at all. When people perceive that their freedom is going to be altered due to an unwanted change, they outwardly exhibit some symptomatic reactive behaviors such as inertia, resistance, skepticism, and aggression. No matter how intense people's reactance is, only a few of…

DYNAMIC EVALUATION OF REGIONAL AIR QUALITY MODELS: ASSESSING CHANGES TO O 3 STEMMING FROM CHANGES IN EMISSIONS AND METEOROLOGY

EPA Science Inventory

Regional-scale air quality models are used to estimate the response of air pollutants to potential emission control strategies as part of the decision-making process. Traditionally, the model predicted pollutant concentrations are evaluated for the “base case” to assess a model’s...

Atmospheric Ozone 1985. Assessment of our understanding of the processes controlling its present distribution and change, volume 3

NASA Technical Reports Server (NTRS)

1985-01-01

Topics addressed include: assessment models; model predictions of ozone changes; ozone and temperature trends; trace gas effects on climate; kinetics and photchemical data base; spectroscopic data base (infrared to microwave); instrument intercomparisons and assessments; and monthly mean distribution of ozone and temperature.

Grey matter alterations in migraine: A systematic review and meta-analysis.

PubMed

Jia, Zhihua; Yu, Shengyuan

2017-01-01

To summarize and meta-analyze studies on changes in grey matter (GM) in patients with migraine. We aimed to determine whether there are concordant structural changes in the foci, whether structural changes are concordant with functional changes, and provide further understanding of the anatomy and biology of migraine. We searched PubMed and Embase for relevant articles published between January 1985 and November 2015, and examined the references within relevant primary articles. Following exclusion of unsuitable studies, meta-analysis were performed using activation likelihood estimation (ALE). Eight clinical studies were analyzed for structural changes, containing a total of 390 subjects (191 patients and 199 controls). Five functional studies were enrolled, containing 93 patients and 96 controls. ALE showed that the migraineurs had concordant decreases in the GM volume (GMV) in the bilateral inferior frontal gyri, the right precentral gyrus, the left middle frontal gyrus and the left cingulate gyrus. GMV decreases in right claustrum, left cingulated gyrus, right anterior cingulate, amygdala and left parahippocampal gyrus are related to estimated frequency of headache attack . Activation was found in the somatosensory, cingulate, limbic lobe, basal ganglia and midbrain in migraine patients. GM changes in migraineurs may indicate the mechanism of pain processing and associated symptoms. Changes in the frontal gyrus may predispose a person to pain conditions. The limbic regions may be accumulated damage due to the repetitive occurrence of pain-related processes. Increased activation in precentral gyrus and cingulate opposed to GMV decrease might suggest increased effort duo to disorganization of these areas and/or the use of compensatory strategies involving pain processing in migraine. Knowledge of these structural and functional changes may be useful for monitoring disease progression as well as for therapeutic interventions.

The role of local sea surface temperature pattern changes in shaping climate change in the North Atlantic sector

NASA Astrophysics Data System (ADS)

Hand, Ralf; Keenlyside, Noel S.; Omrani, Nour-Eddine; Bader, Jürgen; Greatbatch, Richard J.

2018-03-01

Beside its global effects, climate change is manifested in many regionally pronounced features mainly resulting from changes in the oceanic and atmospheric circulation. Here we investigate the influence of the North Atlantic SST on shaping the winter-time response to global warming. Our results are based on a long-term climate projection with the Max Planck Institute Earth System Model (MPI-ESM) to investigate the influence of North Atlantic sea surface temperature pattern changes on shaping the atmospheric climate change signal. In sensitivity experiments with the model's atmospheric component we decompose the response into components controlled by the local SST structure and components controlled by global/remote changes. MPI-ESM simulates a global warming response in SST similar to other climate models: there is a warming minimum—or "warming hole"—in the subpolar North Atlantic, and the sharp SST gradients associated with the Gulf Stream and the North Atlantic Current shift northward by a few a degrees. Over the warming hole, global warming causes a relatively weak increase in rainfall. Beyond this, our experiments show more localized effects, likely resulting from future SST gradient changes in the North Atlantic. This includes a significant precipitation decrease to the south of the Gulf Stream despite increased underlying SSTs. Since this region is characterised by a strong band of precipitation in the current climate, this is contrary to the usual case that wet regions become wetter and dry regions become drier in a warmer climate. A moisture budget analysis identifies a complex interplay of various processes in the region of modified SST gradients: reduced surface winds cause a decrease in evaporation; and thermodynamic, modified atmospheric eddy transports, and coastal processes cause a change in the moisture convergence. The changes in the the North Atlantic storm track are mainly controlled by the non-regional changes in the forcing. The impact of the local SST pattern changes on regions outside the North Atlantic is small in our setup.

Dynamic Feed Control For Injection Molding

DOEpatents

Kazmer, David O.

1996-09-17

The invention provides methods and apparatus in which mold material flows through a gate into a mold cavity that defines the shape of a desired part. An adjustable valve is provided that is operable to change dynamically the effective size of the gate to control the flow of mold material through the gate. The valve is adjustable while the mold material is flowing through the gate into the mold cavity. A sensor is provided for sensing a process condition while the part is being molded. During molding, the valve is adjusted based at least in part on information from the sensor. In the preferred embodiment, the adjustable valve is controlled by a digital computer, which includes circuitry for acquiring data from the sensor, processing circuitry for computing a desired position of the valve based on the data from the sensor and a control data file containing target process conditions, and control circuitry for generating signals to control a valve driver to adjust the position of the valve. More complex embodiments include a plurality of gates, sensors, and controllable valves. Each valve is individually controllable so that process conditions corresponding to each gate can be adjusted independently. This allows for great flexibility in the control of injection molding to produce complex, high-quality parts.

Reversible large–scale modification of cortical networks during neuroprosthetic control

PubMed Central

Ganguly, Karunesh; Wallis, Jonathan D.

2012-01-01

Brain-Machine Interfaces (BMI) provide a framework to study cortical dynamics and the neural correlates of learning. Neuroprosthetic control has been associated with tuning changes in specific neurons directly projecting to the BMI (hereafter ‘direct neurons’). However, little is known about the larger network dynamics. By monitoring ensembles of neurons that were either causally linked to BMI control or indirectly involved, here we show that proficient neuroprosthetic control is associated with large-scale modifications to the cortical network in macaque monkeys. Specifically, there were changes in the preferred direction of both direct and indirect neurons. Interestingly, with learning, there was a relative decrease in the net modulation of indirect neural activity in comparison to the direct activity. These widespread differential changes in the direct and indirect population activity were remarkably stable from one day to the next and readily coexisted with the long-standing cortical network for upper limb control. Thus, the process of learning BMI control is associated with differential modification of neural populations based on their specific relation to movement control. PMID:21499255

Reversible large-scale modification of cortical networks during neuroprosthetic control.

PubMed

Ganguly, Karunesh; Dimitrov, Dragan F; Wallis, Jonathan D; Carmena, Jose M

2011-05-01

Brain-machine interfaces (BMIs) provide a framework for studying cortical dynamics and the neural correlates of learning. Neuroprosthetic control has been associated with tuning changes in specific neurons directly projecting to the BMI (hereafter referred to as direct neurons). However, little is known about the larger network dynamics. By monitoring ensembles of neurons that were either causally linked to BMI control or indirectly involved, we found that proficient neuroprosthetic control is associated with large-scale modifications to the cortical network in macaque monkeys. Specifically, there were changes in the preferred direction of both direct and indirect neurons. Notably, with learning, there was a relative decrease in the net modulation of indirect neural activity in comparison with direct activity. These widespread differential changes in the direct and indirect population activity were markedly stable from one day to the next and readily coexisted with the long-standing cortical network for upper limb control. Thus, the process of learning BMI control is associated with differential modification of neural populations based on their specific relation to movement control.

Goldstone (GDSCC) administrative computing

NASA Technical Reports Server (NTRS)

Martin, H.

1981-01-01

The GDSCC Data Processing Unit provides various administrative computing services for Goldstone. Those activities, including finance, manpower and station utilization, deep-space station scheduling and engineering change order (ECO) control are discussed.

Teacher training as a behavior change process: principles and results from a longitudinal study.

PubMed

Kealey, K A; Peterson, A V; Gaul, M A; Dinh, K T

2000-02-01

For students to realize the benefits of behavior change curricula for disease prevention, programs must be implemented effectively. However, implementation failure is a common problem documented in the literature. In this article, teacher training is conceptualized as a behavior change process with explicit teacher motivation components included to help effect the intended behavior (i.e., implementation). Using this method, the Hutchinson Smoking Prevention Project, a randomized controlled trial in school-based smoking prevention, conducted 65 in-service programs, training nearly 500 teachers (Grades 3-10) from 72 schools. Implementation was monitored by teacher self-report and classroom observations by project staff. The results were favorable. All eligible teachers received training, virtually all trained teachers implemented the research curriculum, and 89% of observed lessons worked as intended. It is concluded that teacher training conceptualized as a behavior change process and including explicit teacher motivation components can promote effective implementation of behavior change curricula in public school classrooms.

Changing Beliefs about Trauma: A Qualitative Study of Cognitive Processing Therapy.

PubMed

Price, Jennifer L; MacDonald, Helen Z; Adair, Kathryn C; Koerner, Naomi; Monson, Candice M

2016-03-01

Controlled qualitative methods complement quantitative treatment outcome research and enable a more thorough understanding of the effects of therapy and the suspected mechanisms of action. Thematic analyses were used to examine outcomes of cognitive processing therapy (CPT) for posttraumatic stress disorder (PTSD) in a randomized controlled trial of individuals diagnosed with military-related PTSD (n = 15). After sessions 1 and 11, participants wrote "impact statements" describing their appraisals of their trauma and beliefs potentially impacted by traumatic events. Trained raters coded each of these statements using a thematic coding scheme. An analysis of thematic coding revealed positive changes over the course of therapy in participants' perspective on their trauma and their future, supporting the purported mechanisms of CPT. Implications of this research for theory and clinical practice are discussed.

Surface patterning of CRFP composites using femtosecond laser interferometry

NASA Astrophysics Data System (ADS)

Oliveira, V.; Moreira, R. D. F.; de Moura, M. F. S. F.; Vilar, R.

2018-03-01

We report on the surface patterning of carbon fiber-reinforced polymer (CFRP) composites using femtosecond laser interferometry. The effect of experimental processing parameters, such as the pulse energy and scanning speed, on the quality of the patterns is studied. Using the appropriate processing parameters, a selective removal of the epoxy resin can be achieved, leaving the carbon fibers exposed and textured with the desired pattern. The period of the patterns can be controlled by changing the distance between the two interfering beams. On the other hand, the amplitude of the patterns can be controlled by changing the pulse energy or the number of laser pulses applied. In addition, sub-micron ripples are created on the carbon fibers surface allowing multiscale surface modification which may contribute to improve bonding between CFRP parts.

Opposing effects of oxytocin on overt compliance and lasting changes to memory.

PubMed

Edelson, Micah G; Shemesh, Maya; Weizman, Abraham; Yariv, Shahak; Sharot, Tali; Dudai, Yadin

2015-03-01

From infancy we learn to comply with societal norms. However, overt compliance is not necessarily accompanied by a change in internal beliefs. The neuromodulatory processes underlying these different phenomena are not yet understood. Here, we test the role of oxytocin in controlling overt compliance versus internalization of information delivered by a social source. After intranasal oxytocin administration, participants showed enhanced compliance to the erroneous opinion of others. However, this expression was coupled with a decrease in the influence of others on long-term memories. Our data suggest that this dissociation may result from reduced conflict in the face of social pressure, which increases immediate conforming behavior, but reduces processing required for deep encoding. These findings reveal a neurobiological control system that oppositely affects internalization and overt compliance.

How the Second Screens Change the Way People Interact and Learn: The Effects of Second Screen Use on Information Processing

ERIC Educational Resources Information Center

Shin, Dong-Hee; An, Hyeri; Kim, Jang Hyun

2016-01-01

The use of a second screen can enhance information processing and the execution of search tasks within a given period. In this study, we examined the learner's attentional shift (AS) between two screens and controlled secondary tasks (STs) in the media multitasking setting and its effect on the learning process. In particular, we analyzed how…

Long-term variability in the water budget and its controls in an oak-dominated temperate forest

Treesearch

Jing Xie; Ge Sun; Hou-Sen Chu; Junguo Liu; Steven G. McNulty; Asko Noormets; Ranjeet John; Zutao Ouyang; Tianshan Zha; Haitao Li; Wenbin Guan; Jiquan Chen

2014-01-01

Water availability is one of the key environmental factors that control ecosystem functions in temperate forests. Changing climate is likely to alter the ecohydrology and other ecosystem processes, which affect forest structures and functions. We constructed a multi-year water budget (2004–2010) and quantified environmental controls on an evapotranspiration (ET) in a...

Prior cocaine exposure disrupts extinction of fear conditioning

PubMed Central

Burke, Kathryn A.; Franz, Theresa M.; Gugsa, Nishan; Schoenbaum, Geoffrey

2008-01-01

Psychostimulant exposure has been shown to cause molecular and cellular changes in prefrontal cortex. It has been hypothesized that these drug-induced changes might affect the operation of prefrontal-limbic circuits, disrupting their normal role in controlling behavior and thereby leading to compulsive drug-seeking. To test this hypothesis, we tested cocaine-treated rats in a fear conditioning, inflation, and extinction task, known to depend on medial prefrontal cortex and amygdala. Cocaine-treated rats conditioned and inflated similar to saline controls but displayed slower extinction learning. These results support the hypothesis that control processes in the medial prefrontal cortex are impaired by cocaine exposure. PMID:16847305

Prior cocaine exposure disrupts extinction of fear conditioning.

PubMed

Burke, Kathryn A; Franz, Theresa M; Gugsa, Nishan; Schoenbaum, Geoffrey

2006-01-01

Psychostimulant exposure has been shown to cause molecular and cellular changes in prefrontal cortex. It has been hypothesized that these drug-induced changes might affect the operation of prefrontal-limbic circuits, disrupting their normal role in controlling behavior and thereby leading to compulsive drug-seeking. To test this hypothesis, we tested cocaine-treated rats in a fear conditioning, inflation, and extinction task, known to depend on medial prefrontal cortex and amygdala. Cocaine-treated rats conditioned and inflated similar to saline controls but displayed slower extinction learning. These results support the hypothesis that control processes in the medial prefrontal cortex are impaired by cocaine exposure.

Neurophysiological Changes Measured Using Somatosensory Evoked Potentials.

PubMed

Macerollo, Antonella; Brown, Matt J N; Kilner, James M; Chen, Robert

2018-05-01

Measurements of somatosensory evoked potentials (SEPs), recorded using electroencephalography during different phases of movement, have been fundamental in understanding the neurophysiological changes related to motor control. SEP recordings have also been used to investigate adaptive plasticity changes in somatosensory processing related to active and observational motor learning tasks. Combining noninvasive brain stimulation with SEP recordings and intracranial SEP depth recordings, including recordings from deep brain stimulation electrodes, has been critical in identifying neural areas involved in specific temporal stages of somatosensory processing. Consequently, this fundamental information has furthered our understanding of the maladaptive plasticity changes related to pathophysiology of diseases characterized by abnormal movements, such as Parkinson's disease, dystonia, and functional movement disorders. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

User's instructions for the Grodins' respiratory control model using the UNIVAC 1110 remote batch and demand processing

NASA Technical Reports Server (NTRS)

1974-01-01

The transient and steady state response of the respiratory control system for variations in volumetric fractions of inspired gases and special system parameters are modeled. The program contains the capability to change workload. The program is based on Grodins' respiratory control model and can be envisioned as a feedback control system comprised of a plant (the controlled system) and the regulating component (controlling system). The controlled system is partitioned into 3 compartments corresponding to lungs, brain, and tissue with a fluid interconnecting patch representing the blood.

It's a two-way street: Automatic and controlled processes in children's emotional responses to moral transgressions.

PubMed

Dys, Sebastian P; Malti, Tina

2016-12-01

This study examined children's automatic, spontaneous emotional reactions to everyday moral transgressions and their relations with self-reported emotions, which are more complex and infused with controlled cognition. We presented children ​(N=242 4-, 8-, and 12-year-olds) with six everyday moral transgression scenarios in an experimental setting, and both their spontaneous facial emotional reactions and self-reported emotions in the role of the transgressor were recorded. We found that across age self-reported guilt was positively associated with spontaneous fear, and self-reported anger was positively related to spontaneous sadness. In addition, we found a developmental increase in spontaneous sadness and decrease in spontaneous happiness. These results support the importance of automatic and controlled processes in evoking children's emotional responses to everyday moral transgressions. We conclude by providing potential explanations for how automatic and controlled processes function in children's everyday moral experiences and how these processes may change with age. Copyright © 2016 Elsevier Inc. All rights reserved.

Study on color identification for monitoring and controlling fermentation process of branched chain amino acid

NASA Astrophysics Data System (ADS)

Ma, Lei; Wang, Yizhong; Chen, Ning; Liu, Tiegen; Xu, Qingyang; Kong, Fanzhi

2008-12-01

In this paper, a new method for monitoring and controlling fermentation process of branched chain amino acid (BCAA) was proposed based on color identification. The color image of fermentation broth of BCAA was firstly taken by a CCD camera. Then, it was changed from RGB color model to HIS color model. Its histograms of hue H and saturation S were calculated, which were used as the input of a designed BP network. The output of the BP network was the description of the color of fermentation broth of BCAA. After training, the color of fermentation broth was identified by the BP network according to the histograms of H and S of a fermentation broth image. Along with other parameters, the fermentation process of BCAA was monitored and controlled to start the stationary phase of fermentation soon. Experiments were conducted with satisfied results to show the feasibility and usefulness of color identification of fermentation broth in fermentation process control of BCAA.

Neural correlates of change detection and change blindness in a working memory task.

PubMed

Pessoa, Luiz; Ungerleider, Leslie G

2004-05-01

Detecting changes in an ever-changing environment is highly advantageous, and this ability may be critical for survival. In the present study, we investigated the neural substrates of change detection in the context of a visual working memory task. Subjects maintained a sample visual stimulus in short-term memory for 6 s, and were asked to indicate whether a subsequent, test stimulus matched or did not match the original sample. To study change detection largely uncontaminated by attentional state, we compared correct change and correct no-change trials at test. Our results revealed that correctly detecting a change was associated with activation of a network comprising parietal and frontal brain regions, as well as activation of the pulvinar, cerebellum, and inferior temporal gyrus. Moreover, incorrectly reporting a change when none occurred led to a very similar pattern of activations. Finally, few regions were differentially activated by trials in which a change occurred but subjects failed to detect it (change blindness). Thus, brain activation was correlated with a subject's report of a change, instead of correlated with the physical change per se. We propose that frontal and parietal regions, possibly assisted by the cerebellum and the pulvinar, might be involved in controlling the deployment of attention to the location of a change, thereby allowing further processing of the visual stimulus. Visual processing areas, such as the inferior temporal gyrus, may be the recipients of top-down feedback from fronto-parietal regions that control the reactive deployment of attention, and thus exhibit increased activation when a change is reported (irrespective of whether it occurred or not). Whereas reporting that a change occurred, be it correctly or incorrectly, was associated with strong activation in fronto-parietal sites, change blindness appears to involve very limited territories.

Controls on Permeability Evolution in Fractured-Sorbing Media

NASA Astrophysics Data System (ADS)

Elsworth, D.

2017-12-01

A critical component in the desire to recover energy and fuels from the subsurface, or to sequester energy-related and other wastes, is the ability to control properties that influence the transport and storage of mass, fluids and energy. In fractured media, permeabilities are strongly dependent on effective stresses. In turn, effective stresses (M) are mediated by changes in fluid pressures (H), compositions of the permeating fluids and permeated rocks (C) and changes in temperature (T) - and sometimes influenced by biological (B) processes. First we explore the role of specific complex THMC(B) interactions in mediating changes in permeability in response to a change in spherical stress. These include the roles of differential strains, induced within shales by changes in pressure (H), gas concentration (C) or temperature (T), in driving changes in permeability, in particular where the effects of sorption are pronounced. We show that the influence of such pressure-, sorption- and thermally-induced changes in damage and porosity are countered, by the first order resetting effects of creep that influence the crack distribution within the fractured aggregate. Second, we explore linkages where friction and instability control the response to changes in differential stress. Changes in permeability are controlled by styles of deformation - brittle versus ductile - with modes of deformation in turn mediated by mineralogy of both native and altered mineral constituents, the evolving scale of deformation and in the progress of deformation through the dynamic loading cycle.

Changing attitudes to infection management in primary care: a controlled trial of active versus passive guideline implementation strategies.

PubMed

Onion, C W; Bartzokas, C A

1998-04-01

When attempting to implement evidence-based medicine, such as through clinical guidelines, we often rely on passive educational tactics, for example didactic lectures and bulletins. These methods involve the recipient in relatively superficial processing of information, and any consequent attitude changes can be expected to be short-lived. However, active methods, such as practice-based discussion, should involve recipients in deep processing, with more enduring attitude changes. In this experiment, the aim was to assess the efficacy of an active strategy at promoting deep processing and its effectiveness, relative to a typical passive method, at changing attitudes between groups of GPs over 12 months across an English Health District. All 191 GPs operating from 69 practices in the Wirral Health District of Northwest England were assigned, with minimization of known confounding variables, to three experimental groups: active, passive and control. The groups were shown to have similar learning styles. The objective of the study was to impart knowledge of best management of infections as captured in a series of locally developed clinical guidelines. The passive group GPs were given a copy of the guidelines and were invited to an hour-long lecture event. The GPs in the deep group were given a copy of the guidelines and were invited to engage in an hour-long discussion about the guideline content at their own premises. The control group received neither the guidelines nor any educational contact regarding them. Three months before and 12 months after the interventions, all GPs were sent a postal questionnaire on their preferred empirical antibiotic for 10 common bacterial infections. The responses were compared in order to ascertain whether increased knowledge of best clinical practice was evident in each group. Seventy-five per cent (144/191) of GPs responded to the pre-intervention questionnaire, 62 % (119/191) post-intervention. Thirty-four per cent (22/64) of GPs in the passive group attended the lecture; 91% (60/66) of the active group engaged in discussion at meetings with the authors. A significantly higher proportion of the active group participants' speaking time, during a sample of four visits, was devoted to verbal indicators of active processing than the passive group lecture attenders (difference = 55%, Fisher's exact test P = 0.002, OR = 11.5, 95% CI 2.1-113.4). Inter-observer agreement on the classification of the verbal evidence was highly statistically significant for all classes (Pearson's product moment correlation, P < 0.0005, r = +0.893 to +0.999) except repetition (P > 0.05, r = +0.407). Median compliance of responses with the guidelines improved by 2.5% within the control group and 4% within the passive, but by 23% within the active. The difference between the changes in the active and control groups was highly statistically significant at 17.5% (Mann-Whitney test, P = 0.004, 95% CI 6-29%). However, for the 10 infections, the median difference between the changes in the passive and control groups was not significant at 3% (P = 0.75, 95% CI -8 to +12. The median difference between changes in the active and passive groups was significant at 17% (P = 0.015, 95% CI 7-24%) in favour of the active. An active educational strategy attracted more participation and was more effective at generating deep cognitive processing than a passive strategy. A large improvement, lasting for at least 12 months, in attitude-compliance with guidelines on the optimal treatment of infections was imparted by the active processing method. A typical passive method was much less popular and had an insignificant impact on attitudes. The findings suggest that initiatives aiming to implement evidence-based guidelines must employ active educational strategies if enduring changes in attitude are to result.

A system identification approach for developing model predictive controllers of antibody quality attributes in cell culture processes.

PubMed

Downey, Brandon; Schmitt, John; Beller, Justin; Russell, Brian; Quach, Anthony; Hermann, Elizabeth; Lyon, David; Breit, Jeffrey

2017-11-01

As the biopharmaceutical industry evolves to include more diverse protein formats and processes, more robust control of Critical Quality Attributes (CQAs) is needed to maintain processing flexibility without compromising quality. Active control of CQAs has been demonstrated using model predictive control techniques, which allow development of processes which are robust against disturbances associated with raw material variability and other potentially flexible operating conditions. Wide adoption of model predictive control in biopharmaceutical cell culture processes has been hampered, however, in part due to the large amount of data and expertise required to make a predictive model of controlled CQAs, a requirement for model predictive control. Here we developed a highly automated, perfusion apparatus to systematically and efficiently generate predictive models using application of system identification approaches. We successfully created a predictive model of %galactosylation using data obtained by manipulating galactose concentration in the perfusion apparatus in serialized step change experiments. We then demonstrated the use of the model in a model predictive controller in a simulated control scenario to successfully achieve a %galactosylation set point in a simulated fed-batch culture. The automated model identification approach demonstrated here can potentially be generalized to many CQAs, and could be a more efficient, faster, and highly automated alternative to batch experiments for developing predictive models in cell culture processes, and allow the wider adoption of model predictive control in biopharmaceutical processes. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 33:1647-1661, 2017. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers.

An adaptive learning control system for aircraft

NASA Technical Reports Server (NTRS)

Mekel, R.; Nachmias, S.

1978-01-01

A learning control system and its utilization as a flight control system for F-8 Digital Fly-By-Wire (DFBW) research aircraft is studied. The system has the ability to adjust a gain schedule to account for changing plant characteristics and to improve its performance and the plant's performance in the course of its own operation. Three subsystems are detailed: (1) the information acquisition subsystem which identifies the plant's parameters at a given operating condition; (2) the learning algorithm subsystem which relates the identified parameters to predetermined analytical expressions describing the behavior of the parameters over a range of operating conditions; and (3) the memory and control process subsystem which consists of the collection of updated coefficients (memory) and the derived control laws. Simulation experiments indicate that the learning control system is effective in compensating for parameter variations caused by changes in flight conditions.

Modelling aspects regarding the control in 13C isotope separation column

NASA Astrophysics Data System (ADS)

Boca, M. L.

2016-08-01

Carbon represents the fourth most abundant chemical element in the world, having two stable and one radioactive isotope. The 13Carbon isotopes, with a natural abundance of 1.1%, plays an important role in numerous applications, such as the study of human metabolism changes, molecular structure studies, non-invasive respiratory tests, Alzheimer tests, air pollution and global warming effects on plants [9] A manufacturing control system manages the internal logistics in a production system and determines the routings of product instances, the assignment of workers and components, the starting of the processes on not-yet-finished product instances. Manufacturing control does not control the manufacturing processes themselves, but has to cope with the consequences of the processing results (e.g. the routing of products to a repair station). In this research it was fulfilled some UML (Unified Modelling Language) diagrams for modelling the C13 Isotope Separation column, implement in STARUML program. Being a critical process and needing a good control and supervising, the critical parameters in the column, temperature and pressure was control using some PLC (Programmable logic controller) and it was made some graphic analyze for this to observe some critical situation than can affect the separation process. The main parameters that need to be control are: -The liquid nitrogen (N2) level in the condenser. -The electrical power supplied to the boiler. -The vacuum pressure.

Interaction of preservation methods and radiation sterilization in human skin processing, with particular insight on the impact of the final water content and collagen disruption. Part I: process validation, water activity and collagen changes in tissues cryopreserved or processed using 50, 85 or 98% glycerol solutions.

PubMed

Herson, M R; Hamilton, K; White, J; Alexander, D; Poniatowski, S; O'Connor, A J; Werkmeister, J A

2018-04-25

Current regulatory requirements demand an in-depth understanding and validation of protocols used in tissue banking. The aim of this work was to characterize the quality of split thickness skin allografts cryopreserved or manufactured using highly concentrated solutions of glycerol (50, 85 or 98%), where tissue water activity (a w ), histology and birefringence changes were chosen as parameters. Consistent a w outcomes validated the proposed processing protocols. While no significant changes in tissue quality were observed under bright-field microscopy or in collagen birefringence, in-process findings can be harnessed to fine-tune and optimize manufacturing outcomes in particular when further radiation sterilization is considered. Furthermore, exposing the tissues to 85% glycerol seems to derive the most efficient outcomes as far as a w and control of microbiological growth.

Vehicle Steering control: A model of learning

NASA Technical Reports Server (NTRS)

Smiley, A.; Reid, L.; Fraser, M.

1978-01-01

A hierarchy of strategies were postulated to describe the process of learning steering control. Vehicle motion and steering control data were recorded for twelve novices who drove an instrumented car twice a week during and after a driver training course. Car-driver describing functions were calculated, the probable control structure determined, and the driver-alone transfer function modelled. The data suggested that the largest changes in steering control with learning were in the way the driver used the lateral position cue.

Mathematic Model of Digital Control System with PID Regulator and Regular Step of Quantization with Information Transfer via the Channel of Plural Access

NASA Astrophysics Data System (ADS)

Abramov, G. V.; Emeljanov, A. E.; Ivashin, A. L.

Theoretical bases for modeling a digital control system with information transfer via the channel of plural access and a regular quantization cycle are submitted. The theory of dynamic systems with random changes of the structure including elements of the Markov random processes theory is used for a mathematical description of a network control system. The characteristics of similar control systems are received. Experimental research of the given control systems is carried out.

Software control and system configuration management: A systems-wide approach

NASA Technical Reports Server (NTRS)

Petersen, K. L.; Flores, C., Jr.

1984-01-01

A comprehensive software control and system configuration management process for flight-crucial digital control systems of advanced aircraft has been developed and refined to insure efficient flight system development and safe flight operations. Because of the highly complex interactions among the hardware, software, and system elements of state-of-the-art digital flight control system designs, a systems-wide approach to configuration control and management has been used. Specific procedures are implemented to govern discrepancy reporting and reconciliation, software and hardware change control, systems verification and validation testing, and formal documentation requirements. An active and knowledgeable configuration control board reviews and approves all flight system configuration modifications and revalidation tests. This flexible process has proved effective during the development and flight testing of several research aircraft and remotely piloted research vehicles with digital flight control systems that ranged from relatively simple to highly complex, integrated mechanizations.

Attribution of regional flood changes based on scaling fingerprints

NASA Astrophysics Data System (ADS)

Viglione, A.; Merz, B.; Dung, N.; Parajka, J.; Nester, T.; Bloeschl, G.

2017-12-01

Changes in the river flood regime may be due to atmospheric processes (e.g., increasing precipitation), catchment processes (e.g., soil compaction associated with land use change), and river system processes (e.g., loss of retention volume in the floodplains). We propose a framework for attributing flood changes to these drivers based on a regional analysis. We exploit the scaling characteristics (i.e., fingerprints) with catchment area of the effects of the drivers on flood changes. The estimation of their relative contributions is framed in Bayesian terms. Analysis of a synthetic, controlled case suggests that the accuracy of the regional attribution increases with increasing number of sites and record lengths, decreases with increasing regional heterogeneity, increases with increasing difference of the scaling fingerprints, and decreases with an increase of their prior uncertainty. The applicability of the framework is illustrated for a case study set in Austria, where positive flood trends have been observed at many sites in the past decades. The individual scaling fingerprints related to the atmospheric, catchment, and river system processes are estimated from rainfall data and simple hydrological modeling. Although the distributions of the contributions are rather wide, the attribution identifies precipitation change as the main driver of flood change in the study region.

Effects of Age, Task Performance, and Structural Brain Development on Face Processing

PubMed Central

Cohen Kadosh, Kathrin; Johnson, Mark H; Dick, Frederic; Cohen Kadosh, Roi; Blakemore, Sarah-Jayne

2013-01-01

In this combined structural and functional MRI developmental study, we tested 48 participants aged 7–37 years on 3 simple face-processing tasks (identity, expression, and gaze task), which were designed to yield very similar performance levels across the entire age range. The same participants then carried out 3 more difficult out-of-scanner tasks, which provided in-depth measures of changes in performance. For our analysis we adopted a novel, systematic approach that allowed us to differentiate age- from performance-related changes in the BOLD response in the 3 tasks, and compared these effects to concomitant changes in brain structure. The processing of all face aspects activated the core face-network across the age range, as well as additional and partially separable regions. Small task-specific activations in posterior regions were found to increase with age and were distinct from more widespread activations that varied as a function of individual task performance (but not of age). Our results demonstrate that activity during face-processing changes with age, and these effects are still observed when controlling for changes associated with differences in task performance. Moreover, we found that changes in white and gray matter volume were associated with changes in activation with age and performance in the out-of-scanner tasks. PMID:22661406

Effect of Scientific Argumentation on the Development of Scientific Process Skills in the Context of Teaching Chemistry

ERIC Educational Resources Information Center

Gultepe, Nejla; Kilic, Ziya

2015-01-01

This study was conducted in order to determine the differences in integrated scientific process skills (designing experiments, forming data tables, drawing graphs, graph interpretation, determining the variables and hypothesizing, changing and controlling variables) of students (n = 17) who were taught with an approach based on scientific…

Effects of Thinking Style on Design Strategies: Using Bridge Construction Simulation Programs

ERIC Educational Resources Information Center

Sun, Chuen-Tsai; Wang, Dai-Yi; Chang, Yu-Yeh

2013-01-01

Computer simulation users can freely control operational factors and simulation results, repeat processes, make changes, and learn from simulation environment feedback. The focus of this paper is on simulation-based design tools and their effects on student learning processes in a group of 101 Taiwanese senior high school students. Participants…

Modeling disturbance and succession in forest landscapes using LANDIS: introduction

Treesearch

Brian R. Sturtevant; Eric J. Gustafson; Hong S. He

2004-01-01

Modeling forest landscape change is challenging because it involves the interaction of a variety of factors and processes, such as climate, succession, disturbance, and management. These processes occur at various spatial and temporal scales, and the interactions can be complex on heterogeneous landscapes. Because controlled field experiments designed to investigate...

SPF45-related SPLICING FACTOR FOR PHYTOCHROME SIGNALING promotes photomorphogensis by regulating pre-mRNA splicing in arabidopsis

USDA-ARS?s Scientific Manuscript database

Light signals regulate plant growth and development by controlling a plethora of gene expression changes. Post-transcriptional regulation, especially pre-mRNA processing, is a key modulator of gene expression; however, the molecular mechanisms linking pre-mRNA processing and light signaling are not ...

Thioredoxin-linked redox control of metabolism in Methanocaldococcus jannaschii, an evolutionarily deeply-rooted hyperthermophilic methanogenic archaeon

USDA-ARS?s Scientific Manuscript database

Thioredoxin (Trx), a small redox protein, controls multiple processes in eukaryotes and bacteria by changing the thiol redox status of selected proteins. We have investigated this aspect in methanarchaea. These ancient methanogens produce methane almost exclusively from H2 plus CO2 carried approxima...

40 CFR 60.5110 - How do I comply with the increment of progress for submittal of a control plan?

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emission Guidelines and Compliance Times for Existing Sewage Sludge Incineration Units Model Rule... pollution control and process changes that you will use to comply with the emission limits and standards and...

Characterization of ceramic powders by an X-ray measuring method

NASA Technical Reports Server (NTRS)

Ziegler, B.

1983-01-01

X-ray line broadening analysis gives quantitative data on structural changes of ceramic powders after different processing steps. Various Al2O3 powders were investigated and the following points are discussed on the basis of these results: X-ray line broadening analysis, structural changes during grinding, structural changes during annealing, influence of structural properties on sintering behavior and application of line broadening analysis to quality control of powders.

Participants in or Reflectors of the Social Change Process? Six Selected Magazines Consider the Birth Control Controversy, 1915-1925.

ERIC Educational Resources Information Center

Fleener, Nickieann

Twenty-two issues of each of six magazines published between 1915 and 1925 were analyzed to determine whether those magazines served only as mirrors of social change or took a more active role, either as agents of social change or as agents of social conservatism. Specifically, the study examined the manner in which the following magazines covered…

Oral Cancer Facts

MedlinePlus

... biophysical processes of aging cells that allows malignant transformation, or perhaps, immune system competence diminishes with age. ... cancer develops We know that all cancers (neoplastic transformations) result from changes (mutations) in genes which control ...

The Mechanism of Speech Processing in Congenital Amusia: Evidence from Mandarin Speakers

PubMed Central

Liu, Fang; Jiang, Cunmei; Thompson, William Forde; Xu, Yi; Yang, Yufang; Stewart, Lauren

2012-01-01

Congenital amusia is a neuro-developmental disorder of pitch perception that causes severe problems with music processing but only subtle difficulties in speech processing. This study investigated speech processing in a group of Mandarin speakers with congenital amusia. Thirteen Mandarin amusics and thirteen matched controls participated in a set of tone and intonation perception tasks and two pitch threshold tasks. Compared with controls, amusics showed impaired performance on word discrimination in natural speech and their gliding tone analogs. They also performed worse than controls on discriminating gliding tone sequences derived from statements and questions, and showed elevated thresholds for pitch change detection and pitch direction discrimination. However, they performed as well as controls on word identification, and on statement-question identification and discrimination in natural speech. Overall, tasks that involved multiple acoustic cues to communicative meaning were not impacted by amusia. Only when the tasks relied mainly on pitch sensitivity did amusics show impaired performance compared to controls. These findings help explain why amusia only affects speech processing in subtle ways. Further studies on a larger sample of Mandarin amusics and on amusics of other language backgrounds are needed to consolidate these results. PMID:22347374

The mechanism of speech processing in congenital amusia: evidence from Mandarin speakers.

PubMed

Liu, Fang; Jiang, Cunmei; Thompson, William Forde; Xu, Yi; Yang, Yufang; Stewart, Lauren

2012-01-01

Congenital amusia is a neuro-developmental disorder of pitch perception that causes severe problems with music processing but only subtle difficulties in speech processing. This study investigated speech processing in a group of Mandarin speakers with congenital amusia. Thirteen Mandarin amusics and thirteen matched controls participated in a set of tone and intonation perception tasks and two pitch threshold tasks. Compared with controls, amusics showed impaired performance on word discrimination in natural speech and their gliding tone analogs. They also performed worse than controls on discriminating gliding tone sequences derived from statements and questions, and showed elevated thresholds for pitch change detection and pitch direction discrimination. However, they performed as well as controls on word identification, and on statement-question identification and discrimination in natural speech. Overall, tasks that involved multiple acoustic cues to communicative meaning were not impacted by amusia. Only when the tasks relied mainly on pitch sensitivity did amusics show impaired performance compared to controls. These findings help explain why amusia only affects speech processing in subtle ways. Further studies on a larger sample of Mandarin amusics and on amusics of other language backgrounds are needed to consolidate these results.

Plasma process control with optical emission spectroscopy

NASA Astrophysics Data System (ADS)

Ward, P. P.

Plasma processes for cleaning, etching and desmear of electronic components and printed wiring boards (PWB) are difficult to predict and control. Non-uniformity of most plasma processes and sensitivity to environmental changes make it difficult to maintain process stability from day to day. To assure plasma process performance, weight loss coupons or post-plasma destructive testing must be used. The problem with these techniques is that they are not real-time methods and do not allow for immediate diagnosis and process correction. These methods often require scrapping some fraction of a batch to insure the integrity of the rest. Since these methods verify a successful cycle with post-plasma diagnostics, poor test results often determine that a batch is substandard and the resulting parts unusable. Both of these methods are a costly part of the overall fabrication cost. A more efficient method of testing would allow for constant monitoring of plasma conditions and process control. Process failures should be detected before the parts being treated. are damaged. Real time monitoring would allow for instantaneous corrections. Multiple site monitoring would allow for process mapping within one system or simultaneous monitoring of multiple systems. Optical emission spectroscopy conducted external to the plasma apparatus would allow for this sort of multifunctional analysis without perturbing the glow discharge. In this paper, optical emission spectroscopy for non-intrusive, in situ process control will be explored. A discussion of this technique as it applies towards process control, failure analysis and endpoint determination will be conducted. Methods for identifying process failures, progress and end of etch back and desmear processes will be discussed.

Identifying changes in the role of the infection preventionist through the 2014 practice analysis study conducted by the Certification Board of Infection Control and Epidemiology, Inc.

PubMed

Henman, Lita Jo; Corrigan, Robert; Carrico, Ruth; Suh, Kathryn N

2015-07-01

The Certification Board of Infection Control and Epidemiology, Inc (CBIC) is a voluntary autonomous multidisciplinary board that provides direction and administers the certification process for professionals who are responsible for the infection prevention and control program in a health care facility. The CBIC performs a practice analysis approximately every 4-5 years. The practice analysis is an integral part of the certification examination development process and serves as the backbone of the test content outline. In 2013, the CBIC determined that a practice analysis was required and contracted with Prometric to facilitate the process. The practice analysis was carried out in 2014 by a diverse group of subject matter experts from the United States and Canada. The practice analysis results showed a significant change in the number of tasks and associated knowledge required for the competent practice of infection prevention. As authorized by the CBIC, the test committee is currently reclassifying the bank of examination questions as required and is writing and reviewing questions based on the updated test specifications and content outline. The new content outline will be reflected in examinations that are taken beginning in July 2015. This iterative process of assessing and updating the certification examination ensures not only a valid competency tool but a true reflection of current practices. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Hybrid neuro-heuristic methodology for simulation and control of dynamic systems over time interval.

PubMed

Woźniak, Marcin; Połap, Dawid

2017-09-01

Simulation and positioning are very important aspects of computer aided engineering. To process these two, we can apply traditional methods or intelligent techniques. The difference between them is in the way they process information. In the first case, to simulate an object in a particular state of action, we need to perform an entire process to read values of parameters. It is not very convenient for objects for which simulation takes a long time, i.e. when mathematical calculations are complicated. In the second case, an intelligent solution can efficiently help on devoted way of simulation, which enables us to simulate the object only in a situation that is necessary for a development process. We would like to present research results on developed intelligent simulation and control model of electric drive engine vehicle. For a dedicated simulation method based on intelligent computation, where evolutionary strategy is simulating the states of the dynamic model, an intelligent system based on devoted neural network is introduced to control co-working modules while motion is in time interval. Presented experimental results show implemented solution in situation when a vehicle transports things over area with many obstacles, what provokes sudden changes in stability that may lead to destruction of load. Therefore, applied neural network controller prevents the load from destruction by positioning characteristics like pressure, acceleration, and stiffness voltage to absorb the adverse changes of the ground. Copyright © 2017 Elsevier Ltd. All rights reserved.

Neurolinguistic programming training, trait anxiety, and locus of control.

PubMed

Konefal, J; Duncan, R C; Reese, M A

1992-06-01

Training in the neurolinguistic programming techniques of shifting perceptual position, visual-kinesthetic dissociation, timelines, and change-history, all based on experiential cognitive processing of remembered events, leads to an increased awareness of behavioral contingencies and a more sensitive recognition of environmental cues which could serve to lower trait anxiety and increase the sense of internal control. This study reports on within-person and between-group changes in trait anxiety and locus of control as measured on the Spielberger State-Trait Anxiety Inventory and Wallston, Wallston, and DeVallis' Multiple Health Locus of Control immediately following a 21-day residential training in neurolinguistic programming. Significant with-in-person decreases in trait-anxiety scores and increases in internal locus of control scores were observed as predicted. Chance and powerful other locus of control scores were unchanged. Significant differences were noted on trait anxiety and locus of control scores between European and U.S. participants, although change scores were similar for the two groups. These findings are consistent with the hypothesis that this training may lower trait-anxiety scores and increase internal locus of control scores. A matched control group was not available, and follow-up was unfortunately not possible.

Systematic review of the use of Statistical Process Control methods to measure the success of pressure ulcer prevention.

PubMed

Clark, Michael; Young, Trudie; Fallon, Maureen

2018-06-01

Successful prevention of pressure ulcers is the end product of a complex series of care processes including, but not limited to, the assessment of vulnerability to pressure damage; skin assessment and care; nutritional support; repositioning; and the use of beds, mattresses, and cushions to manage mechanical loads on the skin and soft tissues. The purpose of this review was to examine where and how Statistical Process Control (SPC) measures have been used to assess the success of quality improvement initiatives intended to improve pressure ulcer prevention. A search of 7 electronic bibliographic databases was performed on May 17th, 2017, for studies that met the inclusion criteria. SPC methods have been reported in 9 publications since 2010 to interpret changes in the incidence of pressure ulcers over time. While these methods offer rapid interpretation of changes in incidence than is gained from a comparison of 2 arbitrarily selected time points pre- and post-implementation of change, more work is required to ensure that the clinical and scientific communities adopt the most appropriate SPC methods. © 2018 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

[A strategy of constructing the technological system for quality control of Chinese medicine based on process control and management].

PubMed

Cheng, Yi-Yu; Qian, Zhong-Zhi; Zhang, Bo-Li

2017-01-01

The current situation, bottleneck problems and severe challenges in quality control technology of Chinese Medicine (CM) are briefly described. It is presented to change the phenomenon related to the post-test as the main means and contempt for process control in drug regulation, reverse the situation of neglecting the development of process control and management technology for pharmaceutical manufacture and reconstruct the technological system for quality control of CM products. The regulation and technology system based on process control and management for controlling CM quality should be established to solve weighty realistic problems of CM industry from the root causes, including backwardness of quality control technology, weakness of quality risk control measures, poor reputation of product quality and so on. By this way, the obstacles from poor controllability of CM product quality could be broken. Concentrating on those difficult problems and weak links in the technical field of CM quality control, it is proposed to build CMC (Chemistry, Manufacturing and Controls) regulation for CM products with Chinese characteristics and promote the regulation international recognition as soon as possible. The CMC technical framework, which is clinical efficacy-oriented, manufacturing manner-centered and process control-focused, was designed. To address the clinical characteristics of traditional Chinese medicine (TCM) and the production feature of CM manufacture, it is suggested to establish quality control engineering for CM manufacturing by integrating pharmaceutical analysis, TCM chemistry, TCM pharmacology, pharmaceutical engineering, control engineering, management engineering and other disciplines. Further, a theoretical model of quality control engineering for CM manufacturing and the methodology of digital pharmaceutical engineering are proposed. A technology pathway for promoting CM standard and realizing the strategic goal of CM internationalization is elaborated. Copyright© by the Chinese Pharmaceutical Association.

Evaluation of a Change Detection Methodology by Means of Binary Thresholding Algorithms and Informational Fusion Processes

PubMed Central

Molina, Iñigo; Martinez, Estibaliz; Arquero, Agueda; Pajares, Gonzalo; Sanchez, Javier

2012-01-01

Landcover is subject to continuous changes on a wide variety of temporal and spatial scales. Those changes produce significant effects in human and natural activities. Maintaining an updated spatial database with the occurred changes allows a better monitoring of the Earth’s resources and management of the environment. Change detection (CD) techniques using images from different sensors, such as satellite imagery, aerial photographs, etc., have proven to be suitable and secure data sources from which updated information can be extracted efficiently, so that changes can also be inventoried and monitored. In this paper, a multisource CD methodology for multiresolution datasets is applied. First, different change indices are processed, then different thresholding algorithms for change/no_change are applied to these indices in order to better estimate the statistical parameters of these categories, finally the indices are integrated into a change detection multisource fusion process, which allows generating a single CD result from several combination of indices. This methodology has been applied to datasets with different spectral and spatial resolution properties. Then, the obtained results are evaluated by means of a quality control analysis, as well as with complementary graphical representations. The suggested methodology has also been proved efficiently for identifying the change detection index with the higher contribution. PMID:22737023

Evaluation of a change detection methodology by means of binary thresholding algorithms and informational fusion processes.

PubMed

Molina, Iñigo; Martinez, Estibaliz; Arquero, Agueda; Pajares, Gonzalo; Sanchez, Javier

2012-01-01

Landcover is subject to continuous changes on a wide variety of temporal and spatial scales. Those changes produce significant effects in human and natural activities. Maintaining an updated spatial database with the occurred changes allows a better monitoring of the Earth's resources and management of the environment. Change detection (CD) techniques using images from different sensors, such as satellite imagery, aerial photographs, etc., have proven to be suitable and secure data sources from which updated information can be extracted efficiently, so that changes can also be inventoried and monitored. In this paper, a multisource CD methodology for multiresolution datasets is applied. First, different change indices are processed, then different thresholding algorithms for change/no_change are applied to these indices in order to better estimate the statistical parameters of these categories, finally the indices are integrated into a change detection multisource fusion process, which allows generating a single CD result from several combination of indices. This methodology has been applied to datasets with different spectral and spatial resolution properties. Then, the obtained results are evaluated by means of a quality control analysis, as well as with complementary graphical representations. The suggested methodology has also been proved efficiently for identifying the change detection index with the higher contribution.

Genetic algorithms in adaptive fuzzy control

NASA Technical Reports Server (NTRS)

Karr, C. Lucas; Harper, Tony R.

1992-01-01

Researchers at the U.S. Bureau of Mines have developed adaptive process control systems in which genetic algorithms (GA's) are used to augment fuzzy logic controllers (FLC's). GA's are search algorithms that rapidly locate near-optimum solutions to a wide spectrum of problems by modeling the search procedures of natural genetics. FLC's are rule based systems that efficiently manipulate a problem environment by modeling the 'rule-of-thumb' strategy used in human decision making. Together, GA's and FLC's possess the capabilities necessary to produce powerful, efficient, and robust adaptive control systems. To perform efficiently, such control systems require a control element to manipulate the problem environment, an analysis element to recognize changes in the problem environment, and a learning element to adjust fuzzy membership functions in response to the changes in the problem environment. Details of an overall adaptive control system are discussed. A specific computer-simulated chemical system is used to demonstrate the ideas presented.

How emotions affect eating: a five-way model.

PubMed

Macht, Michael

2008-01-01

Despite the importance of affective processes in eating behaviour, it remains difficult to predict how emotions affect eating. Emphasizing individual differences, previous research did not pay full attention to the twofold variability of emotion-induced changes of eating (variability across both individuals and emotions). By contrast, the present paper takes into account both individual characteristics and emotion features, and specifies five classes of emotion-induced changes of eating: (1) emotional control of food choice, (2) emotional suppression of food intake, (3) impairment of cognitive eating controls, (4) eating to regulate emotions, and (5) emotion-congruent modulation of eating. These classes are distinguished by antecedent conditions, eating responses and mediating mechanisms. They point to basic functional principles underlying the relations between emotions and biologically based motives: interference, concomitance and regulation. Thus, emotion-induced changes of eating can be a result of interference of eating by emotions, a by-product of emotions, and a consequence of regulatory processes (i.e., emotions may regulate eating, and eating may regulate emotions).

Environmental-stress-induced Chromatin Regulation and its Heritability

PubMed Central

Fang, Lei; Wuptra, Kenly; Chen, Danqi; Li, Hongjie; Huang, Shau-Ku; Jin, Chunyuan; Yokoyama, Kazunari K

2014-01-01

Chromatin is subject to proofreading and repair mechanisms during the process of DNA replication, as well as repair to maintain genetic and epigenetic information and genome stability. The dynamic structure of chromatin modulates various nuclear processes, including transcription and replication, by altering the accessibility of the DNA to regulatory factors. Structural changes in chromatin are affected by the chemical modification of histone proteins and DNA, remodeling of nucleosomes, incorporation of variant histones, noncoding RNAs, and nonhistone DNA-binding proteins. Phenotypic diversity and fidelity can be balanced by controlling stochastic switching of chromatin structure and dynamics in response to the environmental disruptors and endogenous stresses. The dynamic chromatin remodeling can, therefore, serve as a sensor, through which environmental and/or metabolic agents can alter gene expression, leading to global cellular changes involving multiple interactive networks. Furthermore its recent evidence also suggests that the epigenetic changes are heritable during the development. This review will discuss the environmental sensing system for chromatin regulation and genetic and epigenetic controls from developmental perspectives. PMID:25045581

On a model of the processes of maintaining a technological area by a manipulator

NASA Astrophysics Data System (ADS)

Ghukasyan, A. A.; Ordyan, A. Ya

2018-04-01

The research refers to the results of mathematical modeling of the process of maintaining a technological area which consists of unstable or fixed objects (targets) and a controlled multi-link manipulator [1–9]. It is assumed that, in the maintenance process, the dynamic characteristics and the phase vector of the manipulator state can change at certain finite times depending on the mass of the cargo or instrument [10, 11]. Some controllability problems are investigated in the case where the manipulator motion on each maintenance interval is described by linear differential equations with constant coefficients and the motions of the objects are given.

Optimal Control of the Valve Based on Traveling Wave Method in the Water Hammer Process

NASA Astrophysics Data System (ADS)

Cao, H. Z.; Wang, F.; Feng, J. L.; Tan, H. P.

2011-09-01

Valve regulation is an effective method for process control during the water hammer. The principle of d'Alembert traveling wave theory was used in this paper to construct the exact analytical solution of the water hammer, and the optimal speed law of the valve that can reduce the water hammer pressure in the maximum extent was obtained. Combining this law with the valve characteristic curve, the principle corresponding to the valve opening changing with time was obtained, which can be used to guide the process of valve closing and to reduce the water hammer pressure in the maximum extent.

Changes in water, nitrogen and carbon cycling in loblolly pine (Pinus taeda L.) during a mortality event

NASA Astrophysics Data System (ADS)

Renninger, H. J.; Hornslein, N.; Siegert, C. M.

2017-12-01

Depending on the type of disturbance, the mortality process of an individual tree may occur over an extended period leading to changes in tree and ecosystem functioning throughout this time period and before ultimate tree death is evident. Therefore, the goals of this research were to quantify physiological changes occurring in loblolly pine (Pinus taeda L.) during an extended mortality event. In July 2015, ten trees were girdled to simulate a Southern pine beetle disturbance and trees were monitored until their eventual mortality which occurred from Aug. to Dec. of 2016. Sapflow rates and litterfall were monitored throughout the mortality process and photosynthetic rates and leaf nitrogen concentrations were measured at the height of the 2016 growing season. Girdled pines had significantly higher sapflow compared with control pines in the first month following girdling, then sapflow did not differ significantly for the remainder of the 2015 growing season. From Dec. 2015 to Dec. 2016, control trees had about 25% higher sapflow compared with girdled pines, but both groups maintained a similar relationship between sapflow and soil moisture. Extensive litterfall occurred throughout the 2016 growing season and litter had 50% higher N concentration than the prior growing season. N concentration of fresh leaves collected in 2016 did not differ in girdled vs. control pines but control pines had 64% higher maximum Rubisco-limited carboxylation rates (Vcmax) and 68% higher electron transport-limited carboxylation rates (Jmax) compared to girdled pines. Control pines also had 66% higher foliage densities and 44% larger growth ring widths than girdled pines at the end of the 2016 growing season. Taken together, these results highlight the physiological changes that occur in pines undergoing mortality before needles completely discolor and drop. Compared with control pines, girdled pines exhibited greater changes in carbon and nitrogen compared with water use suggesting that sapflow per unit leaf area was increased to compensate for the losses in total leaf area. These data highlight the importance of physiological measurements taken throughout a mortality event to more accurately quantify the changes in ecosystem-scale water, nitrogen and carbon balance occurring during disturbance episodes.