Role of veterinarians in modern food hygiene

PubMed Central

Matyáš, Z.

1978-01-01

Veterinary services and veterinary education and training must keep pace with the constantly changing patterns of agriculture and food processing. Changes in methods of animal production are associated with many problems of food processing and food quality. Veterinary supervision of the animal feed industry and of meat and distribution is essential. Quality testing of meat, milk, and eggs requires the introduction of suitable routine sampling systems, laboratory procedures, and complex evaluation procedures. Food hygiene problems have changed in recent years not only as a result of new methods of animal production, but also because of changes in food processing technology and in the presentation of food to the consumer, increased environmental pollution, increased international trade, and increased tourist travel. Food hygienists must adopt an active and progressive policy and change the scope of food control from a purely negative measure into a positive force working towards improved food quality and the avoidance of losses during production. A modern food hygiene programme should cover all stages of production, processing, and distribution of food and also other ingredients, additives and the water used for production and processing. Veterinarians should also be involved in the registration and licensing of enterprises and this should take into account the premises, the procedures to be used, new techniques in animal husbandry, machines and equipment, etc. In order to facilitate the microbiological analysis of foodstuffs, new mechanized or automated laboratory methods are required, and consideration must be given to adequate sampling techniques. PMID:310716

A strategic planning methodology for aircraft redesign

NASA Astrophysics Data System (ADS)

Romli, Fairuz Izzuddin

Due to a progressive market shift to a customer-driven environment, the influence of engineering changes on the product's market success is becoming more prominent. This situation affects many long lead-time product industries including aircraft manufacturing. Derivative development has been the key strategy for many aircraft manufacturers to survive the competitive market and this trend is expected to continue in the future. Within this environment of design adaptation and variation, the main market advantages are often gained by the fastest aircraft manufacturers to develop and produce their range of market offerings without any costly mistakes. This realization creates an emphasis on the efficiency of the redesign process, particularly on the handling of engineering changes. However, most activities involved in the redesign process are supported either inefficiently or not at all by the current design methods and tools, primarily because they have been mostly developed to improve original product development. In view of this, the main goal of this research is to propose an aircraft redesign methodology that will act as a decision-making aid for aircraft designers in the change implementation planning of derivative developments. The proposed method, known as Strategic Planning of Engineering Changes (SPEC), combines the key elements of the product redesign planning and change management processes. Its application is aimed at reducing the redesign risks of derivative aircraft development, improving the detection of possible change effects propagation, increasing the efficiency of the change implementation planning and also reducing the costs and the time delays due to the redesign process. To address these challenges, four research areas have been identified: baseline assessment, change propagation prediction, change impact analysis and change implementation planning. Based on the established requirements for the redesign planning process, several methods and tools that are identified within these research areas have been abstracted and adapted into the proposed SPEC method to meet the research goals. The proposed SPEC method is shown to be promising in improving the overall efficiency of the derivative aircraft planning process through two notional aircraft system redesign case studies that are presented in this study.

Exploring adaptations to climate change with stakeholders: A participatory method to design grassland-based farming systems.

PubMed

Sautier, Marion; Piquet, Mathilde; Duru, Michel; Martin-Clouaire, Roger

2017-05-15

Research is expected to produce knowledge, methods and tools to enhance stakeholders' adaptive capacity by helping them to anticipate and cope with the effects of climate change at their own level. Farmers face substantial challenges from climate change, from changes in the average temperatures and the precipitation regime to an increased variability of weather conditions and the frequency of extreme events. Such changes can have dramatic consequences for many types of agricultural production systems such as grassland-based livestock systems for which climate change influences the seasonality and productivity of fodder production. We present a participatory design method called FARMORE (FARM-Oriented REdesign) that allows farmers to design and evaluate adaptations of livestock systems to future climatic conditions. It explicitly considers three climate features in the design and evaluation processes: climate change, climate variability and the limited predictability of weather. FARMORE consists of a sequence of three workshops for which a pre-existing game-like platform was adapted. Various year-round forage production and animal feeding requirements must be assembled by participants with a computerized support system. In workshop 1, farmers aim to produce a configuration that satisfies an average future weather scenario. They refine or revise the previous configuration by considering a sample of the between-year variability of weather in workshop 2. In workshop 3, they explicitly take the limited predictability of weather into account. We present the practical aspects of the method based on four case studies involving twelve farmers from Aveyron (France), and illustrate it through an in-depth description of one of these case studies with three dairy farmers. The case studies shows and discusses how workshop sequencing (1) supports a design process that progressively accommodates complexity of real management contexts by enlarging considerations of climate change to climate variability and low weather predictability, and (2) increases the credibility and salience of the design method. Further enhancements of the method are outlined, especially the selection of pertinent weather scenarios. Copyright © 2017 Elsevier Ltd. All rights reserved.

Agile manufacturing: The factory of the future

NASA Technical Reports Server (NTRS)

Loibl, Joseph M.; Bossieux, Terry A.

1994-01-01

The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

Initial response of individual soft mast-producing plants to different forest regeneration methods in the Ouachita Mountains

Treesearch

Roger W. Perry; Ronald E. Thill; Philip A. Tappe; David G. Peitz

2004-01-01

Abstract - Recent policy changes have eliminated clearcutting as the primary pine regeneration method on Federal lands in the Southern United States. However, the effects of alternative natural regeneration methods on soft mast production are unknown. We compared plant coverage and mast production of 37 soft mast-producing plants among four...

A quality monitoring program for red blood cell components: in vitro quality indicators before and after implementation of semiautomated processing.

PubMed

Acker, Jason P; Hansen, Adele L; Kurach, Jayme D R; Turner, Tracey R; Croteau, Ioana; Jenkins, Craig

2014-10-01

Canadian Blood Services has been conducting quality monitoring of red blood cell (RBC) components since 2005, a period spanning the implementation of semiautomated component production. The aim was to compare the quality of RBC components produced before and after this production method change. Data from 572 RBC units were analyzed, categorized by production method: Method 1, RBC units produced by manual production methods; Method 2, RBC units produced by semiautomated production and the buffy coat method; and Method 3, RBC units produced by semiautomated production and the whole blood filtration method. RBC units were assessed using an extensive panel of in vitro tests, encompassing regulated quality control criteria such as hematocrit (Hct), hemolysis, and hemoglobin (Hb) levels, as well as adenosine triphosphate, 2,3-diphosphoglycerate, extracellular K(+) and Na(+) levels, methemoglobin, p50, RBC indices, and morphology. Throughout the study, all RBC units met mandated Canadian Standards Association guidelines for Hb and Hct, and most (>99%) met hemolysis requirements. However, there were significant differences among RBC units produced using different methods. Hb content was significantly lower in RBC units produced by Method 2 (51.5 ± 5.6 g/unit; p < 0.001). At expiry, hemolysis was lowest in Method 2-produced RBC units (p < 0.05) and extracellular K(+) levels were lowest in units produced by Method 1 (p < 0.001). While overall quality was similar before and after the production method change, the observed differences, although small, indicate a lack of equivalency across RBC products manufactured by different methods. © 2014 AABB.

Analysis of soybean production and import trends and its import factors in Indonesia

NASA Astrophysics Data System (ADS)

Ningrum, I. H.; Irianto, H.; Riptanti, E. W.

2018-03-01

This study aims to analyze the factors affecting soybean imports in Indonesia and to know the trend and projection of Indonesian soybean production as well as the import in 2016-2020. The basic method used in this research is the description analysis method. The data used are secondary data in the form of time series data from 1979-2015. Methods of data analysis using simultaneous equations model with 2SLS (Two Stage Least Square) method and Trend analysis. The results showed that the factors affecting soybean imports in Indonesia are consumption and production. Consumption has positive effect while production is negatively affected. The percentage changed in soybean imports is greater than the percentage change in consumption and production of soybeans. Consumption is positively influenced by imports and production, while production is influenced positively by consumption and negative by imports. The production trend of soybean in 2016-2020 has a tendency to increase with a percentage of 11.18% per year. Production in 2016 is projected at 1.110.537 tons while in 2020 it will increase to 1,721,350 tons. The import trend in 2016-2020 has a tendency to increase with an average percentage of 4.13% per year. Import in 2016 is projected at 2.224.188 tons while in 2020 it will increase to 2.611.270 tons.

The effect of adjusting model inputs to achieve mass balance on time-dynamic simulations in a food-web model of Lake Huron

USGS Publications Warehouse

Langseth, Brian J.; Jones, Michael L.; Riley, Stephen C.

2014-01-01

Ecopath with Ecosim (EwE) is a widely used modeling tool in fishery research and management. Ecopath requires a mass-balanced snapshot of a food web at a particular point in time, which Ecosim then uses to simulate changes in biomass over time. Initial inputs to Ecopath, including estimates for biomasses, production to biomass ratios, consumption to biomass ratios, and diets, rarely produce mass balance, and thus ad hoc changes to inputs are required to balance the model. There has been little previous research of whether ad hoc changes to achieve mass balance affect Ecosim simulations. We constructed an EwE model for the offshore community of Lake Huron, and balanced the model using four contrasting but realistic methods. The four balancing methods were based on two contrasting approaches; in the first approach, production of unbalanced groups was increased by increasing either biomass or the production to biomass ratio, while in the second approach, consumption of predators on unbalanced groups was decreased by decreasing either biomass or the consumption to biomass ratio. We compared six simulation scenarios based on three alternative assumptions about the extent to which mortality rates of prey can change in response to changes in predator biomass (i.e., vulnerabilities) under perturbations to either fishing mortality or environmental production. Changes in simulated biomass values over time were used in a principal components analysis to assess the comparative effect of balancing method, vulnerabilities, and perturbation types. Vulnerabilities explained the most variation in biomass, followed by the type of perturbation. Choice of balancing method explained little of the overall variation in biomass. Under scenarios where changes in predator biomass caused large changes in mortality rates of prey (i.e., high vulnerabilities), variation in biomass was greater than when changes in predator biomass caused only small changes in mortality rates of prey (i.e., low vulnerabilities), and was amplified when environmental production was increased. When standardized to mean changes in biomass within each scenario, scenarios when vulnerabilities were low and when fishing mortality was increased explained the most variation in biomass. Our findings suggested that approaches to balancing Ecopath models have relatively little effect on changes in biomass over time, especially when compared to assumptions about how mortality rates of prey change in response to changes in predator biomass. We concluded that when constructing food-web models using EwE, determining the effect of changes in predator biomass on mortality rates of prey should be prioritized over determining the best way to balance the model.

Vaccines against seasonal and pandemic influenza and the implications of changes in substrates for virus production.

PubMed

Minor, Philip D

2010-02-15

Influenza virus changes constantly, making vaccine production challenging. Changing the growth substrate from eggs to cell culture raises issues at all stages of the process, from surveillance to the assay of vaccines. The pandemic threat-first H5N1, then H1N1-encouraged a review of methods and brought issues into sharp relief.

Evaluation of the effect of accounting method, IPCC v. LCA, on grass-based and confinement dairy systems' greenhouse gas emissions.

PubMed

O'Brien, D; Shalloo, L; Patton, J; Buckley, F; Grainger, C; Wallace, M

2012-09-01

Life cycle assessment (LCA) and the Intergovernmental Panel on Climate Change (IPCC) guideline methodology, which are the principal greenhouse gas (GHG) quantification methods, were evaluated in this study using a dairy farm GHG model. The model was applied to estimate GHG emissions from two contrasting dairy systems: a seasonal calving pasture-based dairy farm and a total confinement dairy system. Data used to quantify emissions from these systems originated from a research study carried out over a 1-year period in Ireland. The genetic merit of cows modelled was similar for both systems. Total mixed ration was fed in the Confinement system, whereas grazed grass was mainly fed in the grass-based system. GHG emissions from these systems were quantified per unit of product and area. The results of both methods showed that the dairy system that emitted the lowest GHG emissions per unit area did not necessarily emit the lowest GHG emissions possible for a given level of product. Consequently, a recommendation from this study is that GHG emissions be evaluated per unit of product given the growing affluent human population and increasing demand for dairy products. The IPCC and LCA methods ranked dairy systems' GHG emissions differently. For instance, the IPCC method quantified that the Confinement system reduced GHG emissions per unit of product by 8% compared with the grass-based system, but the LCA approach calculated that the Confinement system increased emissions by 16% when off-farm emissions associated with primary dairy production were included. Thus, GHG emissions should be quantified using approaches that quantify the total GHG emissions associated with the production system, so as to determine whether the dairy system was causing emissions displacement. The IPCC and LCA methods were also used in this study to simulate, through a dairy farm GHG model, what effect management changes within both production systems have on GHG emissions. The findings suggest that single changes have a small mitigating effect on GHG emissions (<5%), except for strategies used to control emissions from manure storage in the Confinement system (14% to 24%). However, when several management strategies were combined, GHG emissions per unit of product could be reduced significantly (15% to 30%). The LCA method was identified as the preferred approach to assess the effect of management changes on GHG emissions, but the analysis indicated that further standardisation of the approach is needed given the sensitivity of the approach to allocation decisions regarding milk and meat.

Assessing potential prescription reimbursement changes: Estimated acquisition costs in Wisconsin

PubMed Central

Kreling, David H.

1989-01-01

Potential impacts from two methods of changing prescription drug ingredient reimbursement in the Wisconsin Medicaid program were estimated. Current reimbursement amounts were compared with those resulting from either direct prices for eight manufacturers' products and average wholesale price less 10.5 percent for other products or wholesaler cost plus 5.01 percent for all products. The resulting overall average ingredient cost reimbursement reductions were 6.64 percent ($0.56 per prescription) and 6.94 percent ($0.59 per prescription) for the two methods, respectively. The results should be viewed from the perspective of both program savings and reduced pharmacists' revenues. PMID:10313098

A survey of the reformulation of Australian child-oriented food products.

PubMed

Savio, Stephanie; Mehta, Kaye; Udell, Tuesday; Coveney, John

2013-09-11

Childhood obesity is one of the most pressing public health challenges of the 21st century. Reformulating commonly eaten food products is a key emerging strategy to improve the food supply and help address rising rates of obesity and chronic disease. This study aimed to monitor reformulation of Australian child-oriented food products (products marketed specifically to children) from 2009-2011. In 2009, all child-oriented food products in a large supermarket in metropolitan Adelaide were identified. These baseline products were followed up in 2011 to identify products still available for sale. Nutrient content data were collected from Nutrient Information Panels in 2009 and 2011. Absolute and percentage change in nutrient content were calculated for energy, total fat, saturated fat, sugars, sodium and fibre. Data were descriptively analysed to examine reformulation in individual products, in key nutrients, within product categories and across all products. Two methods were used to assess the extent of reformulation; the first involved assessing percentage change in single nutrients over time, while the second involved a set of nutrient criteria to assess changes in overall healthiness of products over time. Of 120 products, 40 remained unchanged in nutrient composition from 2009-2011 and 80 underwent change. The proportions of positively and negatively reformulated products were similar for most nutrients surveyed, with the exception of sodium. Eighteen products (15%) were simultaneously positively and negatively reformulated for different nutrients. Using percentage change in nutrient content to assess extent of reformulation, nearly half (n = 53) of all products were at least moderately reformulated and just over one third (n = 42) were substantially reformulated. The nutrient criteria method revealed 5 products (6%) that were positively reformulated and none that had undergone negative reformulation. Positive and negative reformulation was observed to a similar extent within the sample indicating little overall improvement in healthiness of the child-oriented food supply from 2009-2011. In the absence of agreed reformulation standards, the extent of reformulation was assessed against criteria developed specifically for this project. While arbitrary in nature, these criteria were based on reasonable assessment of the meaningfulness of reformulation and change in nutrient composition. As well as highlighting nutrient composition changes in a number of food products directed to children, this study emphasises the need to develop comprehensive, targeted and standardised reformulation benchmarks to assess the extent of reformulation occurring in the food supply.

Practical application of game theory based production flow planning method in virtual manufacturing networks

NASA Astrophysics Data System (ADS)

Olender, M.; Krenczyk, D.

2016-08-01

Modern enterprises have to react quickly to dynamic changes in the market, due to changing customer requirements and expectations. One of the key area of production management, that must continuously evolve by searching for new methods and tools for increasing the efficiency of manufacturing systems is the area of production flow planning and control. These aspects are closely connected with the ability to implement the concept of Virtual Enterprises (VE) and Virtual Manufacturing Network (VMN) in which integrated infrastructure of flexible resources are created. In the proposed approach, the players role perform the objects associated with the objective functions, allowing to solve the multiobjective production flow planning problems based on the game theory, which is based on the theory of the strategic situation. For defined production system and production order models ways of solving the problem of production route planning in VMN on computational examples for different variants of production flow is presented. Possible decision strategy to use together with an analysis of calculation results is shown.

A modular modulation method for achieving increases in metabolite production.

PubMed

Acerenza, Luis; Monzon, Pablo; Ortega, Fernando

2015-01-01

Increasing the production of overproducing strains represents a great challenge. Here, we develop a modular modulation method to determine the key steps for genetic manipulation to increase metabolite production. The method consists of three steps: (i) modularization of the metabolic network into two modules connected by linking metabolites, (ii) change in the activity of the modules using auxiliary rates producing or consuming the linking metabolites in appropriate proportions and (iii) determination of the key modules and steps to increase production. The mathematical formulation of the method in matrix form shows that it may be applied to metabolic networks of any structure and size, with reactions showing any kind of rate laws. The results are valid for any type of conservation relationships in the metabolite concentrations or interactions between modules. The activity of the module may, in principle, be changed by any large factor. The method may be applied recursively or combined with other methods devised to perform fine searches in smaller regions. In practice, it is implemented by integrating to the producer strain heterologous reactions or synthetic pathways producing or consuming the linking metabolites. The new procedure may contribute to develop metabolic engineering into a more systematic practice. © 2015 American Institute of Chemical Engineers.

21 CFR 514.8 - Supplements and other changes to an approved application.

Code of Federal Regulations, 2013 CFR

2013-04-01

... method(s) or an addition, deletion, or substitution of steps in an aseptic processing operation; (D... solely affecting a natural product, a recombinant DNA-derived protein/polypeptide, or a complex or...) or references to previously approved documentation; (H) For a natural product, a recombinant DNA...

21 CFR 514.8 - Supplements and other changes to an approved application.

Code of Federal Regulations, 2014 CFR

2014-04-01

... method(s) or an addition, deletion, or substitution of steps in an aseptic processing operation; (D... solely affecting a natural product, a recombinant DNA-derived protein/polypeptide, or a complex or...) or references to previously approved documentation; (H) For a natural product, a recombinant DNA...

21 CFR 514.8 - Supplements and other changes to an approved application.

Code of Federal Regulations, 2012 CFR

2012-04-01

... method(s) or an addition, deletion, or substitution of steps in an aseptic processing operation; (D... solely affecting a natural product, a recombinant DNA-derived protein/polypeptide, or a complex or...) or references to previously approved documentation; (H) For a natural product, a recombinant DNA...

Soft wheat and flour products methods review: solvent retention capacity equation correction

USDA-ARS?s Scientific Manuscript database

This article discusses the results of a significant change to calculations made within AACCI Approved methods 56-10 and 56-11, the Alkaline Water Retention Capacity (AWRC) test and the Solvent Retention Capacity (SRC) test. The AACCI Soft Wheat and Flour Products Technical Committee reviewed propos...

Application of an in vivo hepatic triacylglycerol production method in the setting of a high fat diet in mice

USDA-ARS?s Scientific Manuscript database

High fat (HF) diets typically promote diet-induced obesity (DIO) and metabolic dysfunction (i.e., insulin resistance, hypertriglyceridemia, and hepatic steatosis). Changes in TAG metabolism contribute to the development of hepatic steatosis including changes in production rate from de novo lipogenes...

Environmental Adult Education for Mitigating the Impacts of Climate Change on Crop Production and Fish Farming in Rivers State of Nigeria

ERIC Educational Resources Information Center

Eheazu, Caroline L.; Ezeala, Joy I.

2017-01-01

The threats of climate change to human society and natural ecosystems have become a devastating environmental problem for crop production and fish farming in Nigeria. This is partly because farmers and fisher folk are known to adopt age-old methods that do not counter current global warming and climate change effects. The purpose of this study was…

48 CFR 31.205-42 - Termination costs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the reasonable quantitative requirements of other work. (b) Costs continuing after termination... production due to testing and changing production methods; (iii) Training; and (iv) Lack of familiarity or...

Geospatial Method for Computing Supplemental Multi-Decadal U.S. Coastal Land-Use and Land-Cover Classification Products, Using Landsat Data and C-CAP Products

NASA Technical Reports Server (NTRS)

Spruce, J. P.; Smoot, James; Ellis, Jean; Hilbert, Kent; Swann, Roberta

2012-01-01

This paper discusses the development and implementation of a geospatial data processing method and multi-decadal Landsat time series for computing general coastal U.S. land-use and land-cover (LULC) classifications and change products consisting of seven classes (water, barren, upland herbaceous, non-woody wetland, woody upland, woody wetland, and urban). Use of this approach extends the observational period of the NOAA-generated Coastal Change and Analysis Program (C-CAP) products by almost two decades, assuming the availability of one cloud free Landsat scene from any season for each targeted year. The Mobile Bay region in Alabama was used as a study area to develop, demonstrate, and validate the method that was applied to derive LULC products for nine dates at approximate five year intervals across a 34-year time span, using single dates of data for each classification in which forests were either leaf-on, leaf-off, or mixed senescent conditions. Classifications were computed and refined using decision rules in conjunction with unsupervised classification of Landsat data and C-CAP value-added products. Each classification's overall accuracy was assessed by comparing stratified random locations to available reference data, including higher spatial resolution satellite and aerial imagery, field survey data, and raw Landsat RGBs. Overall classification accuracies ranged from 83 to 91% with overall Kappa statistics ranging from 0.78 to 0.89. The accuracies are comparable to those from similar, generalized LULC products derived from C-CAP data. The Landsat MSS-based LULC product accuracies are similar to those from Landsat TM or ETM+ data. Accurate classifications were computed for all nine dates, yielding effective results regardless of season. This classification method yielded products that were used to compute LULC change products via additive GIS overlay techniques.

Adding Semantics and OPM Ontology for the Provenance of Multi-sensor Merged Climate Data Records. Now What About Reproducibility?

NASA Astrophysics Data System (ADS)

Hua, H.; Wilson, B. D.; Manipon, G.; Pan, L.; Fetzer, E.

2011-12-01

Multi-decadal climate data records are critical to studying climate variability and change. These often also require merging data from multiple instruments such as those from NASA's A-Train that contain measurements covering a wide range of atmospheric conditions and phenomena. Multi-decadal climate data record of water vapor measurements from sensors on A-Train, operational weather, and other satellites are being assembled from existing data sources, or produced from well-established methods published in peer-reviewed literature. However, the immense volume and inhomogeneity of data often requires an "exploratory computing" approach to product generation where data is processed in a variety of different ways with varying algorithms, parameters, and code changes until an acceptable intermediate product is generated. This process is repeated until a desirable final merged product can be generated. Typically the production legacy is often lost due to the complexity of processing steps that were tried along the way. The data product information associated with source data, processing methods, parameters used, intermediate product outputs, and associated materials are often hidden in each of the trials and scattered throughout the processing system(s). We will discuss methods to help users better capture and explore the production legacy of the data, metadata, ancillary files, code, and computing environment changes used during the production of these merged and multi-sensor data products. By leveraging existing semantic and provenance tools, we can capture sufficient information to enable users to track, perform faceted searches, and visualize the provenance of the products and processing lineage. We will explore if sufficient provenance information can be captured to enable science reproducibility of these climate data records.

The effect of adopting new storage methods for extending product validity periods on manufacturers expected inventory costs.

PubMed

Chen, Po-Yu

2014-01-01

The validness of the expiration dates (validity period) that manufacturers provide on food product labels is a crucial food safety problem. Governments must study how to use their authority by implementing fair awards and punishments to prompt manufacturers into adopting rigorous considerations, such as the effect of adopting new storage methods for extending product validity periods on expected costs. Assuming that a manufacturer sells fresh food or drugs, this manufacturer must respond to current stochastic demands at each unit of time to determine the purchase amount of products for sale. If this decision maker is capable and an opportunity arises, new packaging methods (e.g., aluminum foil packaging, vacuum packaging, high-temperature sterilization after glass packaging, or packaging with various degrees of dryness) or storage methods (i.e., adding desiccants or various antioxidants) can be chosen to extend the validity periods of products. To minimize expected costs, this decision maker must be aware of the processing costs of new storage methods, inventory standards, inventory cycle lengths, and changes in relationships between factors such as stochastic demand functions in a cycle. Based on these changes in relationships, this study established a mathematical model as a basis for discussing the aforementioned topics.

Food-packaging interactions influencing quality and safety.

PubMed

Hotchkiss, J H

1997-01-01

Interactions between foods and packaging can be detrimental to quality and/or safety. Changes in product flavour due to aroma sorption and the transfer of undesirable flavours from packaging to foods are important mechanisms of deterioration when foods are packaged in polymer-based materials. Careful consideration must be given to those factors affecting such interactions when selecting packaging materials in order to maximize product quality, safety, and shelf-life while minimizing undesirable changes. Product considerations include sensitivity to flavour and related deteriorations, colour changes, vitamin loss, microbial activity, and amount of flavour available. Storage considerations include temperature, time, and processing method. Polymer considerations include type of polymer and processing method, volume or mass of polymer to product ratio, and whether the interaction is Fickian or non-Fickian. Methodology to determine the extent of such interactions must be developed. Direct interactions between food and packaging are not necessarily detrimental. The same principles governing undesirable interactions can be used to affect desirable outcomes. Examples include films which directly intercept or absorb oxygen, inhibit microorganisms, remove undesirable flavours by sorption, or indicate safety and product shelf-life.

Flood Mapping in the Lower Mekong River Basin Using Daily MODIS Observations

NASA Technical Reports Server (NTRS)

Fayne, Jessica V.; Bolten, John D.; Doyle, Colin S.; Fuhrmann, Sven; Rice, Matthew T.; Houser, Paul R.; Lakshmi, Venkat

2017-01-01

In flat homogenous terrain such as in Cambodia and Vietnam, the monsoon season brings significant and consistent flooding between May and November. To monitor flooding in the Lower Mekong region, the near real-time NASA Flood Extent Product (NASA-FEP) was developed using seasonal normalized difference vegetation index (NDVI) differences from the 250 m resolution Moderate Resolution Imaging Spectroradiometer (MODIS) sensor compared to daily observations. The use of a percentage change interval classification relating to various stages of flooding reduces might be confusing to viewers or potential users, and therefore reducing the product usage. To increase the product usability through simplification, the classification intervals were compared with other commonly used change detection schemes to identify the change classification scheme that best delineates flooded areas. The percentage change method used in the NASA-FEP proved to be helpful in delineating flood boundaries compared to other change detection methods. The results of the accuracy assessments indicate that the -75% NDVI change interval can be reclassified to a descriptive 'flood' classification. A binary system was used to simplify the interpretation of the NASA-FEP by removing extraneous information from lower interval change classes.

Cause-specific mortality time series analysis: a general method to detect and correct for abrupt data production changes

PubMed Central

2011-01-01

Background Monitoring the time course of mortality by cause is a key public health issue. However, several mortality data production changes may affect cause-specific time trends, thus altering the interpretation. This paper proposes a statistical method that detects abrupt changes ("jumps") and estimates correction factors that may be used for further analysis. Methods The method was applied to a subset of the AMIEHS (Avoidable Mortality in the European Union, toward better Indicators for the Effectiveness of Health Systems) project mortality database and considered for six European countries and 13 selected causes of deaths. For each country and cause of death, an automated jump detection method called Polydect was applied to the log mortality rate time series. The plausibility of a data production change associated with each detected jump was evaluated through literature search or feedback obtained from the national data producers. For each plausible jump position, the statistical significance of the between-age and between-gender jump amplitude heterogeneity was evaluated by means of a generalized additive regression model, and correction factors were deduced from the results. Results Forty-nine jumps were detected by the Polydect method from 1970 to 2005. Most of the detected jumps were found to be plausible. The age- and gender-specific amplitudes of the jumps were estimated when they were statistically heterogeneous, and they showed greater by-age heterogeneity than by-gender heterogeneity. Conclusion The method presented in this paper was successfully applied to a large set of causes of death and countries. The method appears to be an alternative to bridge coding methods when the latter are not systematically implemented because they are time- and resource-consuming. PMID:21929756

Accounting for energy and protein reserve changes in predicting diet-allowable milk production in cattle.

PubMed

Tedeschi, L O; Seo, S; Fox, D G; Ruiz, R

2006-12-01

Current ration formulation systems used to formulate diets on farms and to evaluate experimental data estimate metabolizable energy (ME)-allowable and metabolizable protein (MP)-allowable milk production from the intake above animal requirements for maintenance, pregnancy, and growth. The changes in body reserves, measured via the body condition score (BCS), are not accounted for in predicting ME and MP balances. This paper presents 2 empirical models developed to adjust predicted diet-allowable milk production based on changes in BCS. Empirical reserves model 1 was based on the reserves model described by the 2001 National Research Council (NRC) Nutrient Requirements of Dairy Cattle, whereas empirical reserves model 2 was developed based on published data of body weight and composition changes in lactating dairy cows. A database containing 134 individually fed lactating dairy cows from 3 trials was used to evaluate these adjustments in milk prediction based on predicted first-limiting ME or MP by the 2001 Dairy NRC and Cornell Net Carbohydrate and Protein System models. The analysis of first-limiting ME or MP milk production without adjustments for BCS changes indicated that the predictions of both models were consistent (r(2) of the regression between observed and model-predicted values of 0.90 and 0.85), had mean biases different from zero (12.3 and 5.34%), and had moderate but different roots of mean square errors of prediction (5.42 and 4.77 kg/d) for the 2001 NRC model and the Cornell Net Carbohydrate and Protein System model, respectively. The adjustment of first-limiting ME- or MP-allowable milk to BCS changes improved the precision and accuracy of both models. We further investigated 2 methods of adjustment; the first method used only the first and last BCS values, whereas the second method used the mean of weekly BCS values to adjust ME- and MP-allowable milk production. The adjustment to BCS changes based on first and last BCS values was more accurate than the adjustment to BCS based on the mean of all BCS values, suggesting that adjusting milk production for mean weekly variations in BCS added more variability to model-predicted milk production. We concluded that both models adequately predicted the first-limiting ME- or MP-allowable milk after adjusting for changes in BCS.

Environmental Performance of North American Wood Panel Manufacturing

Treesearch

R. Bergman; D. Kaestner; A. Taylor

2015-01-01

Manufacturing building products such as wood panels has environmental impacts, including contributions to climate change. This paper is a compilation of four studies quantifying these impacts using the life-cycle assessment (LCA) method on five wood-based panel products made in North America during 2012. LCA is an internationally accepted and standardized method for...

Life cycle impacts of North American wood panel Manufacturing

Treesearch

Richard Bergman; D. Kaestner; A. M. Taylor

2016-01-01

Manufacturing building products such as wood panels impacts the environment, including contributing to climate change. This study is a compilation of four studies quantifying these impacts using the life cycle assessment (LCA) method on five wood-based panel products made in North America during 2012. LCA is an internationally accepted and standardized method for...

Dietary fat and not calcium supplementation or dairy product consumption is associated with changes in anthropometrics during a randomized, placebo-controlled energy-restriction trial

USDA-ARS?s Scientific Manuscript database

Insufficient calcium intake has been proposed to cause unbalanced energy partitioning leading to obesity. However, weight loss interventions including dietary calcium or dairy product consumption have not reported changes in lipid metabolism measured by the plasma lipidome. Methods. The objective ...

The Changing Role of Guidance and Counselling in Alberta: Fact or Fiction?

ERIC Educational Resources Information Center

Carstensen, Peter; Melnychuk, Don

1980-01-01

Increased activity and production of materials and methods hold potential for constructive change in guidance and counseling. But there is need for reorganization of existing materials to alleviate the bandwagon effect if new methods of guidance and counseling are to improve in Alberta. (JAC)

Real-time biscuit tile image segmentation method based on edge detection.

PubMed

Matić, Tomislav; Aleksi, Ivan; Hocenski, Željko; Kraus, Dieter

2018-05-01

In this paper we propose a novel real-time Biscuit Tile Segmentation (BTS) method for images from ceramic tile production line. BTS method is based on signal change detection and contour tracing with a main goal of separating tile pixels from background in images captured on the production line. Usually, human operators are visually inspecting and classifying produced ceramic tiles. Computer vision and image processing techniques can automate visual inspection process if they fulfill real-time requirements. Important step in this process is a real-time tile pixels segmentation. BTS method is implemented for parallel execution on a GPU device to satisfy the real-time constraints of tile production line. BTS method outperforms 2D threshold-based methods, 1D edge detection methods and contour-based methods. Proposed BTS method is in use in the biscuit tile production line. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Robust design of configurations and parameters of adaptable products

NASA Astrophysics Data System (ADS)

Zhang, Jian; Chen, Yongliang; Xue, Deyi; Gu, Peihua

2014-03-01

An adaptable product can satisfy different customer requirements by changing its configuration and parameter values during the operation stage. Design of adaptable products aims at reducing the environment impact through replacement of multiple different products with single adaptable ones. Due to the complex architecture, multiple functional requirements, and changes of product configurations and parameter values in operation, impact of uncertainties to the functional performance measures needs to be considered in design of adaptable products. In this paper, a robust design approach is introduced to identify the optimal design configuration and parameters of an adaptable product whose functional performance measures are the least sensitive to uncertainties. An adaptable product in this paper is modeled by both configurations and parameters. At the configuration level, methods to model different product configuration candidates in design and different product configuration states in operation to satisfy design requirements are introduced. At the parameter level, four types of product/operating parameters and relations among these parameters are discussed. A two-level optimization approach is developed to identify the optimal design configuration and its parameter values of the adaptable product. A case study is implemented to illustrate the effectiveness of the newly developed robust adaptable design method.

Strain Prioritization for Natural Product Discovery by a High-Throughput Real-Time PCR Method

PubMed Central

2015-01-01

Natural products offer unmatched chemical and structural diversity compared to other small-molecule libraries, but traditional natural product discovery programs are not sustainable, demanding too much time, effort, and resources. Here we report a strain prioritization method for natural product discovery. Central to the method is the application of real-time PCR, targeting genes characteristic to the biosynthetic machinery of natural products with distinct scaffolds in a high-throughput format. The practicality and effectiveness of the method were showcased by prioritizing 1911 actinomycete strains for diterpenoid discovery. A total of 488 potential diterpenoid producers were identified, among which six were confirmed as platensimycin and platencin dual producers and one as a viguiepinol and oxaloterpin producer. While the method as described is most appropriate to prioritize strains for discovering specific natural products, variations of this method should be applicable to the discovery of other classes of natural products. Applications of genome sequencing and genome mining to the high-priority strains could essentially eliminate the chance elements from traditional discovery programs and fundamentally change how natural products are discovered. PMID:25238028

Attributing land-use change carbon emissions to exported biomass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saikku, Laura, E-mail: laura.saikku@helsinki.fi; Soimakallio, Sampo, E-mail: sampo.soimakallio@vtt.fi; Pingoud, Kim, E-mail: kim.pingoud@vtt.fi

2012-11-15

In this study, a simple, transparent and robust method is developed in which land-use change (LUC) emissions are retrospectively attributed to exported biomass products based on the agricultural area occupied for the production. LUC emissions account for approximately one-fifth of current greenhouse gas emissions. Increasing agricultural exports are becoming an important driver of deforestation. Brazil and Indonesia are used as case studies due to their significant deforestation in recent years. According to our study, in 2007, approximately 32% and 15% of the total agricultural land harvested and LUC emissions in Brazil and Indonesia respectively were due to exports. The mostmore » important exported single items with regard to deforestation were palm oil for Indonesia and bovine meat for Brazil. To reduce greenhouse gas (GHG) emissions effectively worldwide, leakage of emissions should be avoided. This can be done, for example, by attributing embodied LUC emissions to exported biomass products. With the approach developed in this study, controversial attribution between direct and indirect LUC and amortization of emissions over the product life cycle can be overcome, as the method operates on an average basis and annual level. The approach could be considered in the context of the UNFCCC climate policy instead of, or alongside with, other instruments aimed at reducing deforestation. However, the quality of the data should be improved and some methodological issues, such as the allocation procedure in multiproduct systems and the possible dilution effect through third parties not committed to emission reduction targets, should be considered. - Highlights: Black-Right-Pointing-Pointer CO{sub 2} emissions from land use changes are highly important. Black-Right-Pointing-Pointer Attribution of land use changes for products is difficult. Black-Right-Pointing-Pointer Simple and robust method is developed to attribute land use change emissions.« less

Quantifying the indirect impacts of climate on agriculture: an inter-method comparison

DOE PAGES

Calvin, Kate; Fisher-Vanden, Karen

2017-10-27

Climate change and increases in CO2 concentration affect the productivity of land, with implications for land use, land cover, and agricultural production. Much of the literature on the effect of climate on agriculture has focused on linking projections of changes in climate to process-based or statistical crop models. However, the changes in productivity have broader economic implications that cannot be quantified in crop models alone. How important are these socio-economic feedbacks to a comprehensive assessment of the impacts of climate change on agriculture? In this paper, we attempt to measure the importance of these interaction effects through an inter-method comparisonmore » between process models, statistical models, and integrated assessment model (IAMs). We find the impacts on crop yields vary widely between these three modeling approaches. Yield impacts generated by the IAMs are 20%-40% higher than the yield impacts generated by process-based or statistical crop models, with indirect climate effects adjusting yields by between - 12% and + 15% (e.g. input substitution and crop switching). The remaining effects are due to technological change.« less

Quantifying the indirect impacts of climate on agriculture: an inter-method comparison

NASA Astrophysics Data System (ADS)

Calvin, Kate; Fisher-Vanden, Karen

2017-11-01

Climate change and increases in CO2 concentration affect the productivity of land, with implications for land use, land cover, and agricultural production. Much of the literature on the effect of climate on agriculture has focused on linking projections of changes in climate to process-based or statistical crop models. However, the changes in productivity have broader economic implications that cannot be quantified in crop models alone. How important are these socio-economic feedbacks to a comprehensive assessment of the impacts of climate change on agriculture? In this paper, we attempt to measure the importance of these interaction effects through an inter-method comparison between process models, statistical models, and integrated assessment model (IAMs). We find the impacts on crop yields vary widely between these three modeling approaches. Yield impacts generated by the IAMs are 20%-40% higher than the yield impacts generated by process-based or statistical crop models, with indirect climate effects adjusting yields by between -12% and +15% (e.g. input substitution and crop switching). The remaining effects are due to technological change.

Quantifying the indirect impacts of climate on agriculture: an inter-method comparison

DOE Office of Scientific and Technical Information (OSTI.GOV)

Calvin, Kate; Fisher-Vanden, Karen

Climate change and increases in CO2 concentration affect the productivity of land, with implications for land use, land cover, and agricultural production. Much of the literature on the effect of climate on agriculture has focused on linking projections of changes in climate to process-based or statistical crop models. However, the changes in productivity have broader economic implications that cannot be quantified in crop models alone. How important are these socio-economic feedbacks to a comprehensive assessment of the impacts of climate change on agriculture? In this paper, we attempt to measure the importance of these interaction effects through an inter-method comparisonmore » between process models, statistical models, and integrated assessment model (IAMs). We find the impacts on crop yields vary widely between these three modeling approaches. Yield impacts generated by the IAMs are 20%-40% higher than the yield impacts generated by process-based or statistical crop models, with indirect climate effects adjusting yields by between - 12% and + 15% (e.g. input substitution and crop switching). The remaining effects are due to technological change.« less

Responses of switchgrass to precipitation changes: Nonlinear and asymmetric?

USDA-ARS?s Scientific Manuscript database

Background/Question/Methods: Climate changes, including chronic changes in precipitation amounts, will influence plant physiology, biomass and productivity, and soil respiration. However, such precipitation effects on switchgrass, a major bioenergy crop, have not been well investigated. Two preci...

Efficient estimation of the maximum metabolic productivity of batch systems.

PubMed

St John, Peter C; Crowley, Michael F; Bomble, Yannick J

2017-01-01

Production of chemicals from engineered organisms in a batch culture involves an inherent trade-off between productivity, yield, and titer. Existing strategies for strain design typically focus on designing mutations that achieve the highest yield possible while maintaining growth viability. While these methods are computationally tractable, an optimum productivity could be achieved by a dynamic strategy in which the intracellular division of resources is permitted to change with time. New methods for the design and implementation of dynamic microbial processes, both computational and experimental, have therefore been explored to maximize productivity. However, solving for the optimal metabolic behavior under the assumption that all fluxes in the cell are free to vary is a challenging numerical task. Previous studies have therefore typically focused on simpler strategies that are more feasible to implement in practice, such as the time-dependent control of a single flux or control variable. This work presents an efficient method for the calculation of a maximum theoretical productivity of a batch culture system using a dynamic optimization framework. The proposed method follows traditional assumptions of dynamic flux balance analysis: first, that internal metabolite fluxes are governed by a pseudo-steady state, and secondly that external metabolite fluxes are dynamically bounded. The optimization is achieved via collocation on finite elements, and accounts explicitly for an arbitrary number of flux changes. The method can be further extended to calculate the complete Pareto surface of productivity as a function of yield. We apply this method to succinate production in two engineered microbial hosts, Escherichia coli and Actinobacillus succinogenes , and demonstrate that maximum productivities can be more than doubled under dynamic control regimes. The maximum theoretical yield is a measure that is well established in the metabolic engineering literature and whose use helps guide strain and pathway selection. We present a robust, efficient method to calculate the maximum theoretical productivity: a metric that will similarly help guide and evaluate the development of dynamic microbial bioconversions. Our results demonstrate that nearly optimal yields and productivities can be achieved with only two discrete flux stages, indicating that near-theoretical productivities might be achievable in practice.

Serious Game Leverages Productive Negativity to Facilitate Conceptual Change in Undergraduate Molecular Biology: A Mixed-Methods Randomized Controlled Trial

ERIC Educational Resources Information Center

Gauthier, Andrea; Jenkinson, Jodie

2017-01-01

We designed a serious game, MolWorlds, to facilitate conceptual change about molecular emergence by using game mechanics (resource management, immersed 3rd person character, sequential level progression, and 3-star scoring system) to encourage cycles of productive negativity. We tested the value-added effect of game design by comparing and…

Soil carbon changes: comparing flux monitoring and mass balance in a box lysimeter experiment.

Treesearch

S.M. Nay; B.T. Bormann

2000-01-01

Direct measures of soil-surface respiration are needed to evaluate belowground biological processes, forest productivity, and ecosystem responses to global change. Although infra-red gas analyzer {IRGA) methods track reference CO2 flows in lab studies, questions remain for extrapolating IRGA methods to field conditions. We constructed 10 box...

A wave superposition method formulated in digital acoustic space

NASA Astrophysics Data System (ADS)

Hwang, Yong-Sin

In this thesis, a new formulation of the Wave Superposition method is proposed wherein the conventional mesh approach is replaced by a simple 3-D digital work space that easily accommodates shape optimization for minimizing or maximizing radiation efficiency. As sound quality is in demand in almost all product designs and also because of fierce competition between product manufacturers, faster and accurate computational method for shape optimization is always desired. Because the conventional Wave Superposition method relies solely on mesh geometry, it cannot accommodate fast shape changes in the design stage of a consumer product or machinery, where many iterations of shape changes are required. Since the use of a mesh hinders easy shape changes, a new approach for representing geometry is introduced by constructing a uniform lattice in a 3-D digital work space. A voxel (a portmanteau, a new word made from combining the sound and meaning, of the words, volumetric and pixel) is essentially a volume element defined by the uniform lattice, and does not require separate connectivity information as a mesh element does. In the presented method, geometry is represented with voxels that can easily adapt to shape changes, therefore it is more suitable for shape optimization. The new method was validated by computing radiated sound power of structures of simple and complex geometries and complex mode shapes. It was shown that matching volume velocity is a key component to an accurate analysis. A sensitivity study showed that it required at least 6 elements per acoustic wavelength, and a complexity study showed a minimal reduction in computational time.

Beyond trend analysis: How a modified breakpoint analysis enhances knowledge of agricultural production after Zimbabwe's fast track land reform

NASA Astrophysics Data System (ADS)

Hentze, Konrad; Thonfeld, Frank; Menz, Gunter

2017-10-01

In the discourse on land reform assessments, a significant lack of spatial and time-series data has been identified, especially with respect to Zimbabwe's ;Fast-Track Land Reform Programme; (FTLRP). At the same time, interest persists among land use change scientists to evaluate causes of land use change and therefore to increase the explanatory power of remote sensing products. This study recognizes these demands and aims to provide input on both levels: Evaluating the potential of satellite remote sensing time-series to answer questions which evolved after intensive land redistribution efforts in Zimbabwe; and investigating how time-series analysis of Normalized Difference Vegetation Index (NDVI) can be enhanced to provide information on land reform induced land use change. To achieve this, two time-series methods are applied to MODIS NDVI data: Seasonal Trend Analysis (STA) and Breakpoint Analysis for Additive Season and Trend (BFAST). In our first analysis, a link of agricultural productivity trends to different land tenure regimes shows that regional clustering of trends is more dominant than a relationship between tenure and trend with a slightly negative slope for all regimes. We demonstrate that clusters of strong negative and positive productivity trends are results of changing irrigation patterns. To locate emerging and fallow irrigation schemes in semi-arid Zimbabwe, a new multi-method approach is developed which allows to map changes from bimodal seasonal phenological patterns to unimodal and vice versa. With an enhanced breakpoint analysis through the combination of STA and BFAST, we are able to provide a technique that can be applied on large scale to map status and development of highly productive cropping systems, which are key for food production, national export and local employment. We therefore conclude that the combination of existing and accessible time-series analysis methods: is able to achieve both: overcoming demonstrated limitations of MODIS based trend analysis and enhancing knowledge of Zimbabwe's FTLRP.

Strategies for Agriculture.

ERIC Educational Resources Information Center

Crosson, Pierre R.; Rosenberg, Norman J.

1989-01-01

Discusses the change of agricultural methods with human population growth. Describes the trends of world food production, changes in farmland, use of fertilizer, and 13 agricultural research institutions. Lists 5 references for further reading. (YP)

A novel method to analyze social transmission in chronologically sequenced assemblages, implemented on cultural inheritance of the art of cooking.

PubMed

Isaksson, Sven; Funcke, Alexander; Envall, Ida; Enquist, Magnus; Lindenfors, Patrik

2015-01-01

Here we present an analytical technique for the measurement and evaluation of changes in chronologically sequenced assemblages. To illustrate the method, we studied the cultural evolution of European cooking as revealed in seven cook books dispersed over the past 800 years. We investigated if changes in the set of commonly used ingredients were mainly gradual or subject to fashion fluctuations. Applying our method to the data from the cook books revealed that overall, there is a clear continuity in cooking over the ages--cooking is knowledge that is passed down through generations, not something (re-)invented by each generation on its own. Looking at three main categories of ingredients separately (spices, animal products and vegetables), however, disclosed that all ingredients do not change according to the same pattern. While choice of animal products was very conservative, changing completely sequentially, changes in the choices of spices, but also of vegetables, were more unbounded. We hypothesize that this may be due a combination of fashion fluctuations and changes in availability due to contact with the Americas during our study time period. The presented method is also usable on other assemblage type data, and can thus be of utility for analyzing sequential archaeological data from the same area or other similarly organized material.

[Method for the evaluation of the stability and usability after opening packages of orally disintegrating tablets: case of amlodipine besilate products].

PubMed

Hori, Katsuhito; Yoshida, Naoko; Okumura, Tomonori; Okamura, Yasufumi; Kawakami, Junichi

2010-08-01

Orally disintegrating (OD) tablets are widely used in clinical practice. However, drug information on the choice and dispensing based on their stability after opening packages and usability in patients and dispensaries is not sufficient. The aim of this study was to investigate possible evaluation methods of the stability and usability of amlodipine OD tablets. Additives of the brand were changed in April 2009, and therefore the previous and current forms and two generics, current and newly marketed (in November 2009) products of different firms, were used. OD tablets were stored at 25 degrees C and 75% relative humidity for 3 months after opening the packages, and their physicochemical properties were evaluated. Their weight, diameter, thickness, and color difference increased slightly from the initial state. The extent of the change in their hardness, disintegration time, and friability was different among products. These physicochemical changes were acceptable in dispensary practice. Storage after opening the packages did not affect their dissolution rate. The dissolution rate at the initial state of the current brand was slower than that of the previous one. All products used were able to be dispensed by an automatic tablet-packing machine and applied to the so-called simple suspension method for intubational administration. Sensory evaluation tests revealed no major difference in the oral disintegration time, taste, impression, and preference among products. In conclusion, the stability and usability of amlodipine OD tablets used in this study were examined using several methods, and they can be used equivalently from the stability and usability viewpoints.

Changes in Instructional System Design (ISD): Improving Training Product Delivery to United States Army Soldiers

DTIC Science & Technology

2005-03-18

simulation. This model is a basis of what is called discovery learning. Discovery learning is constructionist method of instruction, which is a concept in...2005 PAGES: 48 CLASSIFICATION: Unclassified The purpose of this study is to identify methods that could speed up the instructional system design...became obvious as the enemy attacked using asymmetric means and methods . For instance: during the war, a mine identification-training product was

Operation of staged membrane oxidation reactor systems

DOEpatents

Repasky, John Michael

2012-10-16

A method of operating a multi-stage ion transport membrane oxidation system. The method comprises providing a multi-stage ion transport membrane oxidation system with at least a first membrane oxidation stage and a second membrane oxidation stage, operating the ion transport membrane oxidation system at operating conditions including a characteristic temperature of the first membrane oxidation stage and a characteristic temperature of the second membrane oxidation stage; and controlling the production capacity and/or the product quality by changing the characteristic temperature of the first membrane oxidation stage and/or changing the characteristic temperature of the second membrane oxidation stage.

MODIS NDVI Change Detection Techniques and Products Used in the Near Real Time ForWarn System for Detecting, Monitoring, and Analyzing Regional Forest Disturbances

NASA Technical Reports Server (NTRS)

Spruce, Joseph P.; Hargrove, William; Gasser, Jerry; Smoot, James; Kuper, Philip D.

2014-01-01

This presentation discusses MODIS NDVI change detection methods and products used in the ForWarn Early Warning System (EWS) for near real time (NRT) recognition and tracking of regionally evident forest disturbances throughout the conterminous US (CONUS). The latter has provided NRT forest change products to the forest health protection community since 2010, using temporally processed MODIS Aqua and Terra NDVI time series data to currently compute and post 6 different forest change products for CONUS every 8 days. Multiple change products are required to improve detectability and to more fully assess the nature of apparent disturbances. Each type of forest change product reports per pixel percent change in NDVI for a given 24 day interval, comparing current versus a given historical baseline NDVI. EMODIS 7 day expedited MODIS MOD13 data are used to obtain current and historical NDVIs, respectively. Historical NDVI data is processed with Time Series Product Tool (TSPT); and 2) the Phenological Parameters Estimation Tool (PPET) software. While each change products employ maximum value compositing (MVC) of NDVI, the design of specific products primarily differs in terms of the historical baseline. The three main change products use either 1, 3, or all previous years of MVC NDVI as a baseline. Another product uses an Adaptive Length Compositing (ALC) version of MVC to derive an alternative current NDVI that is the freshest quality NDVI as opposed to merely the MVC NDVI across a 24 day time frame. The ALC approach can improve detection speed by 8 to 16 days. ForWarn also includes 2 change products that improve detectability of forest disturbances in lieu of climatic fluctuations, especially in the spring and fall. One compares current MVC NDVI to the zonal maximum under the curve NDVI per pheno-region cluster class, considering all previous years in the MODIS record. The other compares current maximum NDVI to the mean of maximum NDVI for all previous MODIS years.

Productivity: A Selected, Annotated Bibliography, 1976-78.

ERIC Educational Resources Information Center

Brand, Horst, Comp.; Belitsky, Harvey A., Comp.

This selective bibliography provides annotated references for 1,200 books and articles published between 1976 and 1978 which concern productivity--the relation between physical output and input. Publications deal with concepts and methods; measurement of levels and trends; the sources of productivity change (such as technology and research); the…

Health system productivity change in Zambia: A focus on the child health services.

PubMed

Achoki, Tom; Kinfu, Yohannes; Masiye, Felix; Frederix, Geert W J; Hovels, Anke; Leufkens, Hubert G

2017-02-01

Efficiency and productivity improvement have become central in global health debates. In this study, we explored productivity change, particularly the contribution of technological progress and efficiency gains associated with improvements in child survival in Zambia (population 15 million). Productivity was measured by applying the Malmquist productivity index on district-level panel data. The effect of socioeconomic factors was further analyzed by applying an ordinary least squares regression technique. During 2004-2009, overall productivity in Zambia increased by 5.0 per cent, a change largely attributed to technological progress rather than efficiency gains. Within-country productivity comparisons revealed wide heterogeneity in favor of more urbanized and densely populated districts. Improved cooking methods, improved sanitation, and better educated populations tended to improve productive gains, whereas larger household size had an adverse effect. Addressing such district-level factors and ensuring efficient delivery and optimal application of existing health technologies offer a practical pathway for further improving population health.

Pigment Production Analysis in Human Melanoma Cells.

PubMed

Hopkin, Amelia Soto; Paterson, Elyse K; Ruiz, Rolando; Ganesan, Anand K

2016-05-25

The human epidermal melanocyte is a highly specialized pigmented cell that serves to protect the epidermis from ultraviolet (UV) damage through the production of melanin, or melanogenesis. Misregulation in melanogenesis leading to either hyper- or hypo-pigmentation is found in human diseases such as malasma and vitiligo. Current therapies for these diseases are largely unsuccessful and the need for new therapies is necessary. In order to identify genes and or compounds that can alter melanogenesis, methods are required that can detect changes in pigment production as well as expression of key melanogenesis transcription factors and enzymes. Here we describe methods to detect changes in melanogenesis in a human melanoma cell line, MNT-1, by (1) analyzing pigment production by measuring the absorbance of melanin present by spectrophotometry, (2) analyzing transcript expression of potent regulators of melanogenesis by qunatitative reverse-transcription (RT)PCR and (3) analyzing protein expression of potent regulators of melanogenesis by Western blot (WB).

The change of CO2 emission on manufacturing sectors in Indonesia: An input-output analysis

NASA Astrophysics Data System (ADS)

Putranti, Titi Muswati; Imansyah, Muhammad Handry

2017-12-01

The objective of this paper is to evaluate the change of CO2 emission on manufacturing sectors in Indonesia using input-output analysis. The method used supply perspective can measure the impact of an increase in the value added of different productive on manufacturing sectors on total CO2 emission and can identify the productive sectors responsible for the increase in CO2 emission when there is an increase in the value added of the economy. The data used are based on Input-Output Energy Table 1990, 1995 and 2010. The method applied the elasticity of CO2 emission to value added. Using the elasticity approach, one can identify the highest elasticity on manufacturing sector as the change of value added provides high response to CO2 emission. Therefore, policy maker can concentrate on manufacturing sectors with the high response of CO2 emission due to the increase of value added. The approach shows the contribution of the various sectors that deserve more consideration for mitigation policy. Five of highest elasticity of manufacturing sectors of CO2 emission are Spinning & Weaving, Other foods, Tobacco, Wearing apparel, and other fabricated textiles products in 1990. Meanwhile, the most sensitive sectors Petroleum refinery products, Other chemical products, Timber & Wooden Products, Iron & Steel Products and Other non-metallic mineral products in 1995. Two sectors of the 1990 were still in the big ten, i.e. Spinning & weaving and Other foods in 1995 for the most sensitive sectors. The six sectors of 1995 in the ten highest elasticity of CO2 emission on manufacturing which were Plastic products, Other chemical products,Other fabricated metal products, Cement, Iron & steel products, Iron & steel, still existed in 2010 condition. The result of this research shows that there is a change in the most elastic CO2 emission of manufacturing sectors which tends from simple and light manufacturing to be a more complex and heavier manufacturing. Consequently, CO2 emission jumped significantly.

14 CFR 21.95 - Approval of minor changes in type design.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Approval of minor changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.95 Approval of minor changes in type design. Minor changes in a type design may be approved under a method...

14 CFR 21.95 - Approval of minor changes in type design.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Approval of minor changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.95 Approval of minor changes in type design. Minor changes in a type design may be approved under a method...

14 CFR 21.95 - Approval of minor changes in type design.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Approval of minor changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.95 Approval of minor changes in type design. Minor changes in a type design may be approved under a method...

14 CFR 21.95 - Approval of minor changes in type design.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Approval of minor changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.95 Approval of minor changes in type design. Minor changes in a type design may be approved under a method...

14 CFR 21.95 - Approval of minor changes in type design.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Approval of minor changes in type design... TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Changes to Type Certificates § 21.95 Approval of minor changes in type design. Minor changes in a type design may be approved under a method...

Recent Efforts to Improve the Near Real Time Forest Disturbance Monitoring Capabilities of the ForWarn System

NASA Technical Reports Server (NTRS)

Spruce, Joseph; Hargrove, William; Gasser, Gerald

2013-01-01

This presentation discusses the development of anew method for computing NDVI temporal composites from near real time eMODIS data This research is being conducted to improve forest change products used in the ForWarn system for monitoring regional forest disturbances in the United States. ForWarn provides nation-wide NDVI-based forest disturbance detection products that are refreshed every 8 days. Current eMODIS and historical MOD13 24 day NDVI data are used to compute the disturbance detection products. The eMODIS 24 day NDVI data re-aggregated from 7 day NDVI products. The 24 day eMODIS NDVIs are generally cloud free, but do not necessarily use the freshest quality data. To shorten the disturbance detection time, a method has been developed that performs adaptive length/maximum value compositing of eMODIS NDVI, along with cloud and shadow "noise" mitigation. Tests indicate that this method can reduce detection rates by 8-16 days for known recent disturbance events, depending on the cloud frequencies and disturbance type. The noise mitigation in these tests, though imperfect, helped to improve quality of the resulting NDVI and forest change products.

46 CFR 160.076-17 - Approval of design or material changes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... approval before changing PFD production methods. (b) Determinations of equivalence of design, construction... 46 Shipping 6 2010-10-01 2010-10-01 false Approval of design or material changes. 160.076-17... Flotation Devices § 160.076-17 Approval of design or material changes. (a) The manufacturer must submit any...

Measuring Net Investment and Productivity in Timber Production

Treesearch

David N. Wear

1994-01-01

An index number approach is developed for measuring changes in inputs, outputs, and total factor productivity in a timber-producing sector. These methods are applied to timber production in the U.S. South for the period 1952 to 1985. Results suggest that development of the sector may be described by an adjustment phase between 1952 and 1962 and a growth phase between...

A Circular Bioeconomy with Biobased Products from CO2 Sequestration.

PubMed

Venkata Mohan, S; Modestra, J Annie; Amulya, K; Butti, Sai Kishore; Velvizhi, G

2016-06-01

The unprecedented climate change influenced by elevated concentrations of CO2 has compelled the research world to focus on CO2 sequestration. Although existing natural and anthropogenic CO2 sinks have proven valuable, their ability to further assimilate CO2 is now questioned. Thus, we highlight here the importance of biological sequestration methods as alternate and viable routes for mitigating climate change while simultaneously synthesizing value-added products that could sustainably fuel the circular bioeconomy. Four conceptual models for CO2 biosequestration and the synthesis of biobased products, as well as an integrated CO2 biorefinery model, are proposed. Optimizing and implementing this biorefinery model might overcome the limitations of existing sequestration methods and could help realign the carbon balance. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessment and improvement of statistical tools for comparative proteomics analysis of sparse data sets with few experimental replicates.

PubMed

Schwämmle, Veit; León, Ileana Rodríguez; Jensen, Ole Nørregaard

2013-09-06

Large-scale quantitative analyses of biological systems are often performed with few replicate experiments, leading to multiple nonidentical data sets due to missing values. For example, mass spectrometry driven proteomics experiments are frequently performed with few biological or technical replicates due to sample-scarcity or due to duty-cycle or sensitivity constraints, or limited capacity of the available instrumentation, leading to incomplete results where detection of significant feature changes becomes a challenge. This problem is further exacerbated for the detection of significant changes on the peptide level, for example, in phospho-proteomics experiments. In order to assess the extent of this problem and the implications for large-scale proteome analysis, we investigated and optimized the performance of three statistical approaches by using simulated and experimental data sets with varying numbers of missing values. We applied three tools, including standard t test, moderated t test, also known as limma, and rank products for the detection of significantly changing features in simulated and experimental proteomics data sets with missing values. The rank product method was improved to work with data sets containing missing values. Extensive analysis of simulated and experimental data sets revealed that the performance of the statistical analysis tools depended on simple properties of the data sets. High-confidence results were obtained by using the limma and rank products methods for analyses of triplicate data sets that exhibited more than 1000 features and more than 50% missing values. The maximum number of differentially represented features was identified by using limma and rank products methods in a complementary manner. We therefore recommend combined usage of these methods as a novel and optimal way to detect significantly changing features in these data sets. This approach is suitable for large quantitative data sets from stable isotope labeling and mass spectrometry experiments and should be applicable to large data sets of any type. An R script that implements the improved rank products algorithm and the combined analysis is available.

Assessment of winter wheat loss risk impacted by climate change from 1982 to 2011

NASA Astrophysics Data System (ADS)

Du, Xin

2017-04-01

The world's farmers will face increasing pressure to grow more food on less land in succeeding few decades, because it seems that the continuous population growth and agricultural products turning to biofuels would extend several decades into the future. Therefore, the increased demand for food supply worldwide calls for improved accuracy of crop productivity estimation and assessment of grain production loss risk. Extensive studies have been launched to evaluate the impacts of climate change on crop production based on various crop models drove with global or regional climate model (GCM/RCM) output. However, assessment of climate change impacts on agriculture productivity is plagued with uncertainties of the future climate change scenarios and complexity of crop model. Therefore, given uncertain climate conditions and a lack of model parameters, these methods are strictly limited in application. In this study, an empirical assessment approach for crop loss risk impacted by water stress has been established and used to evaluate the risk of winter wheat loss in China, United States, Germany, France and United Kingdom. The average value of winter wheat loss risk impacted by water stress for the three countries of Europe is about -931kg/ha, which is obviously higher in contrast with that in China (-570kg/ha) and in United States (-367kg/ha). Our study has important implications for further application of operational assessment of crop loss risk at a country or region scale. Future studies should focus on using higher spatial resolution remote sensing data, combining actual evapo-transpiration to estimate water stress, improving the method for downscaling of statistic crop yield data, and establishing much more rational and elaborate zoning method.

A comprehensive change detection method for updating the National Land Cover Database to circa 2011

USGS Publications Warehouse

Jin, Suming; Yang, Limin; Danielson, Patrick; Homer, Collin G.; Fry, Joyce; Xian, George

2013-01-01

The importance of characterizing, quantifying, and monitoring land cover, land use, and their changes has been widely recognized by global and environmental change studies. Since the early 1990s, three U.S. National Land Cover Database (NLCD) products (circa 1992, 2001, and 2006) have been released as free downloads for users. The NLCD 2006 also provides land cover change products between 2001 and 2006. To continue providing updated national land cover and change datasets, a new initiative in developing NLCD 2011 is currently underway. We present a new Comprehensive Change Detection Method (CCDM) designed as a key component for the development of NLCD 2011 and the research results from two exemplar studies. The CCDM integrates spectral-based change detection algorithms including a Multi-Index Integrated Change Analysis (MIICA) model and a novel change model called Zone, which extracts change information from two Landsat image pairs. The MIICA model is the core module of the change detection strategy and uses four spectral indices (CV, RCVMAX, dNBR, and dNDVI) to obtain the changes that occurred between two image dates. The CCDM also includes a knowledge-based system, which uses critical information on historical and current land cover conditions and trends and the likelihood of land cover change, to combine the changes from MIICA and Zone. For NLCD 2011, the improved and enhanced change products obtained from the CCDM provide critical information on location, magnitude, and direction of potential change areas and serve as a basis for further characterizing land cover changes for the nation. An accuracy assessment from the two study areas show 100% agreement between CCDM mapped no-change class with reference dataset, and 18% and 82% disagreement for the change class for WRS path/row p22r39 and p33r33, respectively. The strength of the CCDM is that the method is simple, easy to operate, widely applicable, and capable of capturing a variety of natural and anthropogenic disturbances potentially associated with land cover changes on different landscapes.

Real-Time Monitoring of Chemical Changes in Three Kinds of Fermented Milk Products during Fermentation Using Quantitative Difference Nuclear Magnetic Resonance Spectroscopy.

PubMed

Lu, Yi; Ishikawa, Hiroto; Kwon, Yeondae; Hu, Fangyu; Miyakawa, Takuya; Tanokura, Masaru

2018-02-14

Fermented milk products are rising in popularity throughout the world as a result of their health benefits, including improving digestion, normalizing the function of the immune system, and aiding in weight management. This study applies an in situ quantitative nuclear magnetic resonance method to monitor chemical changes in three kinds of fermented milk products, Bulgarian yogurt, Caspian Sea yogurt, and kefir, during fermentation. As a result, the concentration changes in nine organic compounds, α/β-lactose, α/β-galactose, lactic acid, citrate, ethanol, lecithin, and creatine, were monitored in real time. This revealed three distinct metabolic processes in the three fermented milk products. Moreover, pH changes were also determined by variations in the chemical shift of citric acid during the fermentation processes. These results can be applied to estimate microbial metabolism in various flora and help guide the fermentation and storage of various fermented milk products to improve their quality, which may directly influence human health.

Organic Phase Change Nanoparticles for in-Product Labeling of Agrochemicals.

PubMed

Wang, Miao; Duong, Binh; Su, Ming

2015-10-28

There is an urgent need to develop in-product covert barcodes for anti-counterfeiting of agrochemicals. This paper reports a new organic nanoparticle-based in-product barcode system, in which a panel of organic phase change nanoparticles is added as a barcode into in a variety of chemicals (herein agrochemicals). The barcode is readout by detecting melting peaks of organic nanoparticles using differential scanning calorimetry. This method has high labeling capacity due to small sizes of nanoparticles, sharp melting peaks, and large scan range of thermal analysis. The in-product barcode can be effectively used to protect agrochemical products from being counterfeited due to its large coding capacity, technical readiness, covertness, and robustness.

An LCA researcher's wish list--data and emission models needed to improve LCA studies of animal production.

PubMed

Cederberg, C; Henriksson, M; Berglund, M

2013-06-01

The last decade has seen an increase in environmental systems analysis of livestock production, resulting in a significant number of studies with a holistic approach often based on life-cycle assessment (LCA) methodology. The growing public interest in global warming has added to this development; guidelines for carbon footprint (CF) accounting have been developed, including for greenhouse gas (GHG) accounting of animal products. Here we give an overview of methods for estimating GHG emissions, with emphasis on nitrous oxide, methane and carbon from land use change, presently used in LCA/CF studies of animal products. We discuss where methods and data availability for GHGs and nitrogen (N) compounds most urgently need to be improved in order to produce more accurate environmental assessments of livestock production. We conclude that the top priority is to improve models for N fluxes and emissions from soils and to implement soil carbon change models in LCA/CF studies of animal products. We also point at the need for more farm data and studies measuring emissions from soils, manure and livestock in developing countries.

Techno-economical efficiency and productivity change of wastewater treatment plants: the role of internal and external factors.

PubMed

Hernández-Sancho, F; Molinos-Senante, M; Sala-Garrido, R

2011-12-01

Efficiency and productivity are important measures for identifying best practice in businesses and optimising resource-use. This study analyses how these two measures change across the period 2003-2008 for 196 wastewater treatment plants (WWTPs) in Spain, by using the benchmarking methods of Data Envelopment Analysis and the Malmquist Productivity Index. To identify which variables contribute to the sustainability of the WWTPs, differences in efficiency scores and productivity indices for external factors are also investigated. Our results indicate that both efficiency and productivity decreased over the five years. We verify that the productivity drop is primarily explained by technical change. Furthermore, certain external variables affected WWTP efficiency, including plant size, treatment technology and energy consumption. However, plants with low energy consumption are the only ones which improve their productivity. Finally, the benchmarking analyses proved to be useful as management tools in the wastewater sector, by providing vital information for improving the sustainability of plants.

Impacts of tropospheric ozone and climate change on net primary productivity and net carbon exchange of China’s forest ecosystems

Treesearch

Wei Ren; Hanqin Tian; Bo Tao; Art Chappelka; Ge Sun; et al

2011-01-01

Aim We investigated how ozone pollution and climate change/variability have interactively affected net primary productivity (NPP) and net carbon exchange (NCE) across China’s forest ecosystem in the past half century. Location Continental China. Methods Using the dynamic land ecosystem model (DLEM) in conjunction with 10-km-resolution gridded historical data sets (...

4D inversion of time-lapse magnetotelluric data sets for monitoring geothermal reservoir

NASA Astrophysics Data System (ADS)

Nam, Myung Jin; Song, Yoonho; Jang, Hannuree; Kim, Bitnarae

2017-06-01

The productivity of a geothermal reservoir, which is a function of the pore-space and fluid-flow path of the reservoir, varies since the properties of the reservoir changes with geothermal reservoir production. Because the variation in the reservoir properties causes changes in electrical resistivity, time-lapse (TL) three-dimensional (3D) magnetotelluric (MT) methods can be applied to monitor the productivity variation of a geothermal reservoir thanks to not only its sensitivity to the electrical resistivity but also its deep depth of survey penetration. For an accurate interpretation of TL MT-data sets, a four-dimensional (4D) MT inversion algorithm has been developed to simultaneously invert all vintage data considering time-coupling between vintages. However, the changes in electrical resistivity of deep geothermal reservoirs are usually small generating minimum variation in TL MT responses. Maximizing the sensitivity of inversion to the changes in resistivity is critical in the success of 4D MT inversion. Thus, we further developed a focused 4D MT inversion method by considering not only the location of a reservoir but also the distribution of newly-generated fractures during the production. For the evaluation of the 4D MT algorithm, we tested our 4D inversion algorithms using synthetic TL MT-data sets.

A new method to estimate global mass transport and its implication for sea level rise

NASA Astrophysics Data System (ADS)

Yi, S.; Heki, K.

2017-12-01

Estimates of changes in global land mass by using GRACE observations can be achieved by two methods, a mascon method and a forward modeling method. However, results from these two methods show inconsistent secular trend. Sea level budget can be adopted to validate the consistency among observations of sea level rise by altimetry, steric change by the Argo project, and mass change by GRACE. Mascon products from JPL, GSFC and CSR are compared here, we find that all these three products cannot achieve a reconciled sea level budget, while this problem can be solved by a new forward modeling method. We further investigate the origin of this difference, and speculate that it is caused by the signal leakage from the ocean mass. Generally, it is well recognized that land signals leak into oceans, but it also happens the other way around. We stress the importance of correction of leakage from the ocean in the estimation of global land masses. Based on a reconciled sea level budget, we confirmed that global sea level rise has been accelerating significantly over 2005-2015, as a result of the ongoing global temperature increase.

GUIDE TO CLEANER TECHNOLOGIES: ORGANIC COATING REMOVAL

EPA Science Inventory

A cleaner technology is a source reduction or recycle method |applied to eliminate or significantly reduce hazardous waste generation. Source reduction includes product changes and source control. Source control can be further characterized as input material changes, technology...

A Novel Method to Analyze Social Transmission in Chronologically Sequenced Assemblages, Implemented on Cultural Inheritance of the Art of Cooking

PubMed Central

Isaksson, Sven; Funcke, Alexander; Envall, Ida; Enquist, Magnus; Lindenfors, Patrik

2015-01-01

Here we present an analytical technique for the measurement and evaluation of changes in chronologically sequenced assemblages. To illustrate the method, we studied the cultural evolution of European cooking as revealed in seven cook books dispersed over the past 800 years. We investigated if changes in the set of commonly used ingredients were mainly gradual or subject to fashion fluctuations. Applying our method to the data from the cook books revealed that overall, there is a clear continuity in cooking over the ages – cooking is knowledge that is passed down through generations, not something (re-)invented by each generation on its own. Looking at three main categories of ingredients separately (spices, animal products and vegetables), however, disclosed that all ingredients do not change according to the same pattern. While choice of animal products was very conservative, changing completely sequentially, changes in the choices of spices, but also of vegetables, were more unbounded. We hypothesize that this may be due a combination of fashion fluctuations and changes in availability due to contact with the Americas during our study time period. The presented method is also usable on other assemblage type data, and can thus be of utility for analyzing sequential archaeological data from the same area or other similarly organized material. PMID:25970578

[Quality assessment of sulfur-fumigated paeoniae alba radix].

PubMed

Wang, Zhao; Chen, Yu-Wu; Wang, Qiong; Sun, Lei; Xu, Wei-Yi; Jin, Hong-Yu; Ma, Shuang-Cheng

2014-08-01

The samples of sulfur-fumigated Paeoniae Alba Radix acquired both by random spot check from domestic market and self-production by the research group in the laboratory were used to evaluate the effects of sulphur fumigation on the quality of Paeoniae Alba Radix by comparing sulfur-fumigated degree and character, the content of paeoniflorin and paeoniflorin sulfurous acid ester, and changes of the fingerprint. We used methods in Chinese Pharmacopeia to evaluate the character of sulfur-fumigated Paeoniae Alba Radix and determinate the content of aulfur-fumigated paeoniflorin. LC-MS method was used to analyze paeoniflorin-converted products. HPLC fingerprint methods were established to evaluate the differences on quality by similarity. Results showed that fumigated Paeoniae Alba Radix became white and its unique fragrance disappeared, along with the production of pungent sour gas. It also had a significant effect on paeoniflorin content. As sulfur smoked degree aggravated, paeoniflorin content decreased subsequently, some of which turned into paeoniflorin sulfurous acid ester, and this change was not reversible. Fingerprint also showed obvious changes. Obviously, sulfur fumigation had severe influence on the quality of Paeoniae Alba Radix, but we can control the quality of the Paeoniae Alba Radix by testing the paeoniflorin sulfurous acid ester content.

Watching grass grow: Successes and limitations of image-based methods for monitoring grassland phenology

USDA-ARS?s Scientific Manuscript database

Seasonal changes in aboveground primary production (i.e. phenology) are influenced by environmental conditions with implications for land-atmosphere interactions, carbon cycling, and agricultural production. Monitoring phenology and quantifying seasonal patterns across spatially extensive grasslands...

Readily implementable techniques can cut annual CO2 emissions from the production of concrete by over 20%

NASA Astrophysics Data System (ADS)

Miller, Sabbie A.; Horvath, Arpad; Monteiro, Paulo J. M.

2016-07-01

Due to its prevalence in modern infrastructure, concrete is experiencing the most rapid increase in consumption among globally common structural materials; however, the production of concrete results in approximately 8.6% of all anthropogenic CO2 emissions. Many methods have been developed to reduce the greenhouse gas emissions associated with the production of concrete. These methods range from the replacement of inefficient manufacturing equipment to alternative binders and the use of breakthrough technologies; nevertheless, many of these methods have barriers to implementation. In this research, we examine the extent to which the increased use of several currently implemented methods can reduce the greenhouse gas emissions in concrete material production without requiring new technologies, changes in production, or novel material use. This research shows that, through increased use of common supplementary cementitious materials, appropriate selection of proportions for cement replacement, and increased concrete design age, 24% of greenhouse gas emissions from global concrete production or 650 million tonnes (Mt) CO2-eq can be eliminated annually.

Climate engineering and the ocean: effects on biogeochemistry and primary production

NASA Astrophysics Data System (ADS)

Lauvset, Siv K.; Tjiputra, Jerry; Muri, Helene

2017-12-01

Here we use an Earth system model with interactive biogeochemistry to project future ocean biogeochemistry impacts from the large-scale deployment of three different radiation management (RM) climate engineering (also known as geoengineering) methods: stratospheric aerosol injection (SAI), marine sky brightening (MSB), and cirrus cloud thinning (CCT). We apply RM such that the change in radiative forcing in the RCP8.5 emission scenario is reduced to the change in radiative forcing in the RCP4.5 scenario. The resulting global mean sea surface temperatures in the RM experiments are comparable to those in RCP4.5, but there are regional differences. The forcing from MSB, for example, is applied over the oceans, so the cooling of the ocean is in some regions stronger for this method of RM than for the others. Changes in ocean net primary production (NPP) are much more variable, but SAI and MSB give a global decrease comparable to RCP4.5 (˜ 6 % in 2100 relative to 1971-2000), while CCT gives a much smaller global decrease of ˜ 3 %. Depending on the RM methods, the spatially inhomogeneous changes in ocean NPP are related to the simulated spatial change in the NPP drivers (incoming radiation, temperature, availability of nutrients, and phytoplankton biomass) but mostly dominated by the circulation changes. In general, the SAI- and MSB-induced changes are largest in the low latitudes, while the CCT-induced changes tend to be the weakest of the three. The results of this work underscore the complexity of climate impacts on NPP and highlight the fact that changes are driven by an integrated effect of multiple environmental drivers, which all change in different ways. These results stress the uncertain changes to ocean productivity in the future and advocate caution at any deliberate attempt at large-scale perturbation of the Earth system.

Application of meta-analysis methods for identifying proteomic expression level differences.

PubMed

Amess, Bob; Kluge, Wolfgang; Schwarz, Emanuel; Haenisch, Frieder; Alsaif, Murtada; Yolken, Robert H; Leweke, F Markus; Guest, Paul C; Bahn, Sabine

2013-07-01

We present new statistical approaches for identification of proteins with expression levels that are significantly changed when applying meta-analysis to two or more independent experiments. We showed that the Euclidean distance measure has reduced risk of false positives compared to the rank product method. Our Ψ-ranking method has advantages over the traditional fold-change approach by incorporating both the fold-change direction as well as the p-value. In addition, the second novel method, Π-ranking, considers the ratio of the fold-change and thus integrates all three parameters. We further improved the latter by introducing our third technique, Σ-ranking, which combines all three parameters in a balanced nonparametric approach. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Development and validation of an HPLC-DAD method for simultaneous determination of cocaine, benzoic acid, benzoylecgonine and the main adulterants found in products based on cocaine.

PubMed

Floriani, Gisele; Gasparetto, João Cleverson; Pontarolo, Roberto; Gonçalves, Alan Guilherme

2014-02-01

Here, an HPLC-DAD method was developed and validated for simultaneous determination of cocaine, two cocaine degradation products (benzoylecgonine and benzoic acid), and the main adulterants found in products based on cocaine (caffeine, lidocaine, phenacetin, benzocaine and diltiazem). The new method was developed and validated using an XBridge C18 4.6mm×250mm, 5μm particle size column maintained at 60°C. The mobile phase consisted of a gradient of acetonitrile and ammonium formate 0.05M - pH 3.1, eluted at 1.0mL/min. The volume of injection was 10μL and the DAD detector was set at 274nm. Method validation assays demonstrated suitable sensitivity, selectivity, linearity, precision and accuracy. For selectivity assay, a MS detection system could be directly adapted to the method without the need of any change in the chromatographic conditions. The robustness study indicated that the flow rate, temperature and pH of the mobile phase are critical parameters and should not be changed considering the conditions herein determined. The new method was then successfully applied for determining cocaine, benzoylecgonine, benzoic acid, caffeine, lidocaine, phenacetin, benzocaine and diltiazem in 115 samples, seized in Brazil (2007-2012), which consisted of cocaine paste, cocaine base and salt cocaine samples. This study revealed cocaine contents that ranged from undetectable to 97.2%, with 97 samples presenting at least one of the degradation products or adulterants here evaluated. All of the studied degradation products and adulterants were observed among the seized samples, justifying the application of the method, which can be used as a screening and quantification tool in forensic analysis. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

The Future of Pork Production in the World: Towards Sustainable, Welfare-Positive Systems.

PubMed

McGlone, John J

2013-05-15

Among land animals, more pork is eaten in the world than any other meat. The earth holds about one billion pigs who deliver over 100 mmt of pork to people for consumption. Systems of pork production changed from a forest-based to pasture-based to dirt lots and finally into specially-designed buildings. The world pork industry is variable and complex not just in production methods but in economics and cultural value. A systematic analysis of pork industry sustainability was performed. Sustainable production methods are considered at three levels using three examples in this paper: production system, penning system and for a production practice. A sustainability matrix was provided for each example. In a comparison of indoor vs. outdoor systems, the food safety/zoonoses concerns make current outdoor systems unsustainable. The choice of keeping pregnant sows in group pens or individual crates is complex in that the outcome of a sustainability assessment leads to the conclusion that group penning is more sustainable in the EU and certain USA states, but the individual crate is currently more sustainable in other USA states, Asia and Latin America. A comparison of conventional physical castration with immunological castration shows that the less-common immunological castration method is more sustainable (for a number of reasons). This paper provides a method to assess the sustainability of production systems and practices that take into account the best available science, human perception and culture, animal welfare, the environment, food safety, worker health and safety, and economics (including the cost of production and solving world hunger). This tool can be used in countries and regions where the table values of a sustainability matrix change based on local conditions. The sustainability matrix can be used to assess current systems and predict improved systems of the future.

Stylistic Change in Classroom Native Music.

ERIC Educational Resources Information Center

Johnston, Thomas F.

1981-01-01

Discusses the teaching of native music in classes for Native Americans. Highlights the ways in which changes in musical style evolve and the disparities between the teaching process and the music itself. Suggests methods for successfully uniting process and product. (MK)

Changes in oil content, fatty acid composition, and functional lipid profiles during dry grind ethanol production from corn.

USDA-ARS?s Scientific Manuscript database

Demand for alternatives to fossil fuels has resulted in a dramatic increase in ethanol production from corn. The dry grind method has been the major process, resulting in a large volume of dried distiller grains with solubles (DDGS) as a co-product. This presentation reports our study to monitor ...

Information Technology and Academic Productivity.

ERIC Educational Resources Information Center

Massy, William F.; Zemsky, Robert

1996-01-01

Enumerates the challenges of adopting information technology (IT)-based teaching and learning strategies in higher education. Concerns addressed include whether IT should supplant rather than augment traditional teaching methods, the financing of IT acquisition, change of teaching and learning processes to increase productivity per person, and…

Ion transport membrane reactor systems and methods for producing synthesis gas

DOEpatents

Repasky, John Michael

2015-05-12

Embodiments of the present invention provide cost-effective systems and methods for producing a synthesis gas product using a steam reformer system and an ion transport membrane (ITM) reactor having multiple stages, without requiring inter-stage reactant injections. Embodiments of the present invention also provide techniques for compensating for membrane performance degradation and other changes in system operating conditions that negatively affect synthesis gas production.

A Quantitative Method to Monitor Reactive Oxygen Species Production by Electron Paramagnetic Resonance in Physiological and Pathological Conditions

PubMed Central

Mrakic-Sposta, Simona; Gussoni, Maristella; Montorsi, Michela; Porcelli, Simone; Vezzoli, Alessandra

2014-01-01

The growing interest in the role of Reactive Oxygen Species (ROS) and in the assessment of oxidative stress in health and disease clashes with the lack of consensus on reliable quantitative noninvasive methods applicable. The study aimed at demonstrating that a recently developed Electron Paramagnetic Resonance microinvasive method provides direct evidence of the “instantaneous” presence of ROS returning absolute concentration levels that correlate with “a posteriori” assays of ROS-induced damage by means of biomarkers. The reliability of the choice to measure ROS production rate in human capillary blood rather than in plasma was tested (step I). A significant (P < 0.01) linear relationship between EPR data collected on capillary blood versus venous blood (R 2 = 0.95), plasma (R 2 = 0.82), and erythrocytes (R 2 = 0.73) was found. Then (step II) ROS production changes of various subjects' categories, young versus old and healthy versus pathological at rest condition, were found significantly different (range 0.0001–0.05 P level). The comparison of the results with antioxidant capacity and oxidative damage biomarkers concentrations showed that all changes indicating increased oxidative stress are directly related to ROS production increase. Therefore, the adopted method may be an automated technique for a lot of routine in clinical trials. PMID:25374651

Cost analysis of an electricity supply chain using modification of price based dynamic economic dispatch in wheeling transaction scheme

NASA Astrophysics Data System (ADS)

Wahyuda; Santosa, Budi; Rusdiansyah, Ahmad

2018-04-01

Deregulation of the electricity market requires coordination between parties to synchronize the optimization on the production side (power station) and the transport side (transmission). Electricity supply chain presented in this article is designed to facilitate the coordination between the parties. Generally, the production side is optimized with price based dynamic economic dispatch (PBDED) model, while the transmission side is optimized with Multi-echelon distribution model. Both sides optimization are done separately. This article proposes a joint model of PBDED and multi-echelon distribution for the combined optimization of production and transmission. This combined optimization is important because changes in electricity demand on the customer side will cause changes to the production side that automatically also alter the transmission path. The transmission will cause two cost components. First, the cost of losses. Second, the cost of using the transmission network (wheeling transaction). Costs due to losses are calculated based on ohmic losses, while the cost of using transmission lines using the MW - mile method. As a result, this method is able to provide best allocation analysis for electrical transactions, as well as emission levels in power generation and cost analysis. As for the calculation of transmission costs, the Reverse MW-mile method produces a cheaper cost than the Absolute MW-mile method

Estimating bacterial production in marine waters from the simultaneous incorporation of thymidine and leucine.

PubMed

Chin-Leo, G; Kirchman, D L

1988-08-01

We examined the simultaneous incorporation of [H]thymidine and [C]leucine to obtain two independent indices of bacterial production (DNA and protein syntheses) in a single incubation. Incorporation rates of leucine estimated by the dual-label method were generally higher than those obtained by the single-label method, but the differences were small (dual/single = 1.1 +/- 0.2 [mean +/- standard deviation]) and were probably due to the presence of labeled leucyl-tRNA in the cold trichloroacetic acid-insoluble fraction. There were no significant differences in thymidine incorporation between dual- and single-label incubations (dual/ single = 1.03 +/- 0.13). Addition of the two substrates in relatively large amounts (25 nM) did not apparently increase bacterial activity during short incubations (<5 h). With the dual-label method we found that thymidine and leucine incorporation rates covaried over depth profiles of the Chesapeake Bay. Estimates of bacterial production based on thymidine and leucine differed by less than 25%. Although the need for appropriate conversion factors has not been eliminated, the dual-label approach can be used to examine the variation in bacterial production while ensuring that the observed variation in incorporation rates is due to real changes in bacterial production rather than changes in conversion factors or introduction of other artifacts.

Methods to determine the relative value of genetic traits in dairy cows to reduce greenhouse gas emissions along the chain.

PubMed

van Middelaar, C E; Berentsen, P B M; Dijkstra, J; van Arendonk, J A M; de Boer, I J M

2014-01-01

Current decisions on breeding in dairy farming are mainly based on economic values of heritable traits, as earning an income is a primary objective of farmers. Recent literature, however, shows that breeding also has potential to reduce greenhouse gas (GHG) emissions. The objective of this paper was to compare 2 methods to determine GHG values of genetic traits. Method 1 calculates GHG values using the current strategy (i.e., maximizing labor income), whereas method 2 is based on minimizing GHG per kilogram of milk and shows what can be achieved if the breeding results are fully directed at minimizing GHG emissions. A whole-farm optimization model was used to determine results before and after 1 genetic standard deviation improvement (i.e., unit change) of milk yield and longevity. The objective function of the model differed between method 1 and 2. Method 1 maximizes labor income; method 2 minimizes GHG emissions per kilogram of milk while maintaining labor income and total milk production at least at the level before the change in trait. Results show that the full potential of the traits to reduce GHG emissions given the boundaries that were set for income and milk production (453 and 441kg of CO2 equivalents/unit change per cow per year for milk yield and longevity, respectively) is about twice as high as the reduction based on maximizing labor income (247 and 210kg of CO2 equivalents/unit change per cow per year for milk yield and longevity, respectively). The GHG value of milk yield is higher than that of longevity, especially when the focus is on maximizing labor income. Based on a sensitivity analysis, it was shown that including emissions from land use change and using different methods for handling the interaction between milk and meat production can change results, generally in favor of milk yield. Results can be used by breeding organizations that want to include GHG values in their breeding goal. To verify GHG values, the effect of prices and emissions factors should be considered, as well as the potential effect of variation between farm types. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Revision and application of the LINKAGES model to simulate forest growth in central hardwood landscapes in response to climate change

Treesearch

William D. Dijak; Brice B. Hanberry; Jacob S. Fraser; Hong S. He; Wen J. Wang; Frank R. Thompson

2017-01-01

Context. Global climate change impacts forest growth and methods of modeling those impacts at the landscape scale are needed to forecast future forest species composition change and abundance. Changes in forest landscapes will affect ecosystem processes and services such as succession and disturbance, wildlife habitat, and production of forest...

Matching Social and Biophysical Scales in Extensive Livestock Production as a Basis for Adaptation to Global Change

NASA Astrophysics Data System (ADS)

Sayre, N. F.; Bestelmeyer, B.

2015-12-01

Global livestock production is heterogeneous, and its benefits and costs vary widely across global contexts. Extensive grazing lands (or rangelands) constitute the vast majority of the land dedicated to livestock production globally, but they are relatively minor contributors to livestock-related environmental impacts. Indeed, the greatest potential for environmental damage in these lands lies in their potential for conversion to other uses, including agriculture, mining, energy production and urban development. Managing such conversion requires improving the sustainability of livestock production in the face of fragmentation, ecological and economic marginality and climate change. We present research from Mongolia and the United States demonstrating methods of improving outcomes on rangelands by improving the fit between the scales of social and biophysical processes. Especially in arid and semi-arid settings, rangelands exhibit highly variable productivity over space and time and non-linear or threshold dynamics in vegetation; climate change is projected to exacerbate these challenges and, in some cases, diminish overall productivity. Policy and governance frameworks that enable landscape-scale management and administration enable range livestock producers to adapt to these conditions. Similarly, livestock breeds that have evolved to withstand climate and vegetation change improve producers' prospects in the face of increasing variability and declining productivity. A focus on the relationships among primary production, animal production, spatial connectivity, and scale must underpin adaptation strategies in rangelands.

Early Improvement in Work Productivity Predicts Future Clinical Course in Depressed Outpatients: Findings from the CO-MED Trial

PubMed Central

Jha, Manish K.; Minhajuddin, Abu; Greer, Tracy L.; Carmody, Thomas; Rush, A. John; Trivedi, Madhukar H.

2018-01-01

Objective Depression symptom severity, the most commonly studied outcome in antidepressant treatment trials, accounts for only a small portion of burden related to major depression. While lost work productivity is the biggest contributor to depression’s economic burden, few studies have systematically evaluated the independent effect of treatment on work productivity and the relationship between changes in work productivity and longer-term clinical course. Method Work productivity was measured repeatedly by the Work Productivity and Activity Impairment (WPAI) self-report in 331 employed participants with major depression enrolled in the Combining Medications to Enhance Depression Outcomes (CO-MED) trial. Trajectories of change in work productivity during the first 6 weeks of treatment were identified and used to predict remission at 3 and 7 months. Results Participants reported reduced absence from work and increased work productivity with antidepressant treatment even after controlling for changes in depression severity. Three distinct trajectories of changes in work productivity were identified: 1) robust early improvement (24%), 2) minimal change (49%), and 3) high-impairment slight reduction (27%). As compared to other participants, those with robust improvement had 3–5 times higher remission rates at 3 months and 2–5 times higher remission rates at 7 months, even after controlling for select baseline variables and remission status at week 6. Conclusions In this secondary analysis, self-reported work productivity improved in depressed patients with antidepressant treatment even after accounting for depressive symptom reduction. Early improvement in work productivity is associated with much higher remission rates after 3 and 7 months of treatment. PMID:27523501

Evaluation of a Stirling Solar Dynamic System for Lunar Oxygen Production

NASA Technical Reports Server (NTRS)

Colozza, Anthony J.; Wong, Wayne A.

2006-01-01

An evaluation of a solar concentrator-based system for producing oxygen from the lunar regolith was performed. The system utilizes a solar concentrator mirror to provide thermal energy for the oxygen production process as well as thermal energy to power a Stirling heat engine for the production of electricity. The electricity produced is utilized to operate the equipment needed in the oxygen production process. The oxygen production method utilized in the analysis was the hydrogen reduction of ilmenite. Utilizing this method of oxygen production a baseline system design was produced. This baseline system had an oxygen production rate of 0.6 kg/hr with a concentrator mirror size of 5 m. Variations were performed on the baseline design to show how changes in the system size and process rate effected the oxygen production rate.

Release of asbestos fibers from weathered and corroded asbestos cement products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spurny, K.R.

The controversy on whether weathered and corroded asbestos cement products are emitting biologically significant asbestos fiber concentrations in ambient air has not been resolved. Nor is it known if the weathered and corroded asbestos cement products release asbestos fibers which have the same carcinogenic potency as standard chrysotile. The purpose of this research project was to develop a method for sampling and measuring asbestos fiber emissions from solid planar surfaces (i.e., roofs and facades) consisting of asbestos cement products and to develop methods for studying the physical and chemical changes and the carcinogenic potency of the emitted fibers. Using thismore » method asbestos fiber emissions in ambient air have been measured in the FRG during 1984/1986. The emissions of asbestos fibers longer than 5 microns were in the range 10(6) to 10(8) fibers/m2.hr. The ambient air concentrations of these asbestos fibers were for the most part less than 10(3) fibers/m3. It was shown that the emitted asbestos fibers were chemically changed and it was shown with animal experiments that their carcinogenic potency did not differ from the carcinogenicity of standard chrysotile fibers.« less

Estimating agro-ecosystem carbon balance of northern Japan, and comparing the change in carbon stock by soil inventory and net biome productivity.

PubMed

Li, Xi; Toma, Yo; Yeluripati, Jagadeesh; Iwasaki, Shinya; Bellingrath-Kimura, Sonoko D; Jones, Edward O; Hatano, Ryusuke

2016-06-01

Soil C sequestration in croplands is deemed to be one of the most promising greenhouse gas mitigation options for agriculture. We have used crop-level yields, modeled heterotrophic respiration (Rh) and land use data to estimate spatio-temporal changes in regional scale net primary productivity (NPP), plant C inputs, and net biome productivity (NBP) in northern Japan's arable croplands and grasslands for the period of 1959-2011. We compared the changes in C stocks derived from estimated NBP and using repeated inventory datasets for each individual land use type from 2005 to 2011. For the entire study region of 2193 ha, overall annual plant C inputs to the soil constituted 37% of total region NPP. Plant C inputs in upland areas (excluding bush/fallow) could be predicted by climate variables. Overall NBP for all land use types increased from -1.26MgCha(-1)yr(-1) in 1959-0.26 Mg Cha(-1)yr(-1) in 2011. However, upland and paddy fields showed a decreased in NBP over the period of 1959-2011, under the current C input scenario. From 1988, an increase in agricultural abandonment (bush/fallow) and grassland cover caused a slow increase in the regional C pools. The comparison of carbon budgets using the NBP estimation method and the soil inventory method indicated no significant difference between the two methods. Our results showed C loss in upland crops, paddy fields and sites that underwent land use change from paddy field to upland sites. We also show C gain in grassland from 2005 to 2011. An underestimation of NBP or an overestimation of repeated C inventories cannot be excluded, but either method may be suitable for tracking absolute changes in soil C, considering the uncertainty associated with these methods. Copyright © 2016 Elsevier B.V. All rights reserved.

Modernization of AOAC Nutrient Methods by Stakeholder Panel on Infant Formula and Adult Nutritionals.

PubMed

Sullivan, Darryl

2016-01-01

Infant formula is one of the most highly regulated products in the world. To comply with global regulations and to ensure the products are manufactured within product specifications, accurate analytical testing is required. Most of the AOAC INTERNATIONAL legacy test methods for infant formula were developed and validated in the 1980s and 1990s. Although these methods performed very well for many years, infant formulas have been updated, and today's products contain many new and novel ingredients. There were a number of cases in which the legacy AOAC methods began to result in problems with the analysis of modern infant formulas, and the use of these methods caused some disputes with regulatory agencies. In 2010, AOAC reached an agreement with the International Formula Council, which has changed its name to the Infant Nutrition Council of America, regarding a project to modernize these AOAC infant-formula test methods. This agreement led to the development of Standard Method Performance Requirements (SMPRs(®)) for 28 nutrients. After SMPR approval, methods were collected, evaluated, validated, and approved through the AOAC Official Methods(SM) process. Forty-seven methods have been approved as AOAC First Action Methods, and eight have been approved as Final Action.

New developments in optical phase-change memory

NASA Astrophysics Data System (ADS)

Ovshinsky, Stanford R.; Czubatyj, Wolodymyr

2001-02-01

Phase change technology has progressed from the original invention of Ovshinsky to become the leading choice for rewritable optical disks. ECD's early work in phase change materials and methods for operating in a direct overwrite fashion were crucial to the successes that have been achieved. Since the introduction of the first rewritable phase change products in 1991, the market has expanded from CD-RW into rewritable DVD with creative work going on worldwide. Phase change technology is ideally suited to address the continuous demand for increased storage capacity. First, laser beams can be focused to ever-smaller spot sizes using shorter wavelength lasers and higher performance optics. Blue lasers are now commercially viable and high numerical aperture and near field lenses have been demonstrated. Second, multilevel approaches can be used to increase capacity by a factor of three or more with concomitant increases in data transfer rate. In addition, ECD has decreased manufacturing costs through the use of innovative production technology. These factors combine to accelerate the widespread use of phase change technology. As in all our technologies, such as thin film photovoltaics, nickel metal hydride batteries, hydrogen storage systems, fuel cells, electrical memory, etc., we have invented the materials, the products, the production machines and the production processes for high rate, low-cost manufacture.

Use of edible coatings to preserve quality of lightly (and slightly) processed products.

PubMed

Baldwin, E A; Nisperos-Carriedo, M O; Baker, R A

1995-11-01

Lightly processed agricultural products present a special problem to the food industry and to scientists involved in postharvest and food technology research. Light or minimal processing includes cutting, slicing, coring, peeling, trimming, or sectioning of agricultural produce. These products have an active metabolism that can result in deteriorative changes, such as increased respiration and ethylene production. If not controlled, these changes can lead to rapid senescence and general deterioration of the product. In addition, the surface water activity of cut fruits and vegetables is generally quite high, inviting microbial attack, which further reduces product stability. Methods for control of these changes are numerous and can include the use of edible coatings. Also mentioned in this review are coating of nut products, and dried, dehydrated, and freeze-dried fruits. Technically, these are not considered to be minimally processed, but many of the problems and benefits of coating these products are similar to coating lightly processed products. Generally, the potential benefits of edible coatings for processed or lightly processed produce is to stabilize the product and thereby extend product shelf life. More specifically, coatings have the potential to reduce moisture loss, restrict oxygen entrance, lower respiration, retard ethylene production, seal in flavor volatiles, and carry additives that retard discoloration and microbial growth.

Completion of the National Land Cover Database (NLCD) 1992-2001 Land Cover Change Retrofit Product

EPA Science Inventory

The Multi-Resolution Land Characteristics Consortium has supported the development of two national digital land cover products: the National Land Cover Dataset (NLCD) 1992 and National Land Cover Database (NLCD) 2001. Substantial differences in imagery, legends, and methods betwe...

Changes in Speech Production Associated with Alphabet Supplementation

ERIC Educational Resources Information Center

Hustad, Katherine C.; Lee, Jimin

2008-01-01

Purpose: This study examined the effect of alphabet supplementation (AS) on temporal and spectral features of speech production in individuals with cerebral palsy and dysarthria. Method: Twelve speakers with dysarthria contributed speech samples using habitual speech and while using AS. One hundred twenty listeners orthographically transcribed…

Klystron Manufacturing Technology Program.

DTIC Science & Technology

1983-09-01

processes, and methodology used on the current production tube, VKU-7735E, and the new methods and techniques used to improve and reduce the cost of...the bellows. This alignment is c~tclto the smoothi operation of the internal tuniing mezhanism. IT METR𔃼D - VKCU-7795F The new assembly method changes...Varian, the MT contractor that the new methodology , technologies and process changes introduced into the MT power klystron and autotuner assembly - VKU

Climate change and the economics of biomass energy feedstocks in semi-arid agricultural landscapes: A spatially explicit real options analysis.

PubMed

Regan, Courtney M; Connor, Jeffery D; Raja Segaran, Ramesh; Meyer, Wayne S; Bryan, Brett A; Ostendorf, Bertram

2017-05-01

The economics of establishing perennial species as renewable energy feedstocks has been widely investigated as a climate change adapted diversification option for landholders, primarily using net present value (NPV) analysis. NPV does not account for key uncertainties likely to influence relevant landholder decision making. While real options analysis (ROA) is an alternative method that accounts for the uncertainty over future conditions and the large upfront irreversible investment involved in establishing perennials, there have been limited applications of ROA to evaluating land use change decision economics and even fewer applications considering climate change risks. Further, while the influence of spatially varying climate risk on biomass conversion economic has been widely evaluated using NPV methods, effects of spatial variability and climate on land use change have been scarcely assessed with ROA. In this study we applied a simulation-based ROA model to evaluate a landholder's decision to convert land from agriculture to biomass. This spatially explicit model considers price and yield risks under baseline climate and two climate change scenarios over a geographically diverse farming region. We found that underlying variability in primary productivity across the study area had a substantial effect on conversion thresholds required to trigger land use change when compared to results from NPV analysis. Areas traditionally thought of as being quite similar in average productive capacity can display large differences in response to the inclusion of production and price risks. The effects of climate change, broadly reduced returns required for land use change to biomass in low and medium rainfall zones and increased them in higher rainfall areas. Additionally, the risks posed by climate change can further exacerbate the tendency for NPV methods to underestimate true conversion thresholds. Our results show that even under severe drying and warming where crop yield variability is more affected than perennial biomass plantings, comparatively little of the study area is economically viable for conversion to biomass under $200/DM t, and it is not until prices exceed $200/DM t that significant areas become profitable for biomass plantings. We conclude that for biomass to become a valuable diversification option the synchronisation of products and services derived from biomass and the development of markets is vital. Copyright © 2017 Elsevier Ltd. All rights reserved.

Applicability of vacuum impregnation to modify physico-chemical, sensory and nutritive characteristics of plant origin products--a review.

PubMed

Radziejewska-Kubzdela, Elżbieta; Biegańska-Marecik, Róża; Kidoń, Marcin

2014-09-19

Vacuum impregnation is a non-destructive method of introducing a solution with a specific composition to the porous matrices of fruit and vegetables. Mass transfer in this process is a result of mechanically induced differences in pressure. Vacuum impregnation makes it possible to fill large volumes of intercellular spaces in tissues of fruit and vegetables, thus modifying physico-chemical properties and sensory attributes of products. This method may be used, e.g., to reduce pH and water activity of the product, change its thermal properties, improve texture, color, taste and aroma. Additionally, bioactive compounds may be introduced together with impregnating solutions, thus improving health-promoting properties of the product or facilitating production of functional food.

An Institutional Postdoctoral Research Training Program: Increasing Productivity of Postdoctoral Trainees

PubMed Central

Greco-Sanders, Linda; Laudenslager, Mark

2015-01-01

Objective Postdoctoral training is a critical stage of career development, and there has been a national effort to increase the consistency and quality of postdoctoral experiences. However, much of the effort has gone towards improving the process of training with less effort focusing on the content of what should be achieved during postdoctoral training, primarily because of a lack of empirical evidence in this area. One possible predictor of later scientific productivity is the number of peer-reviewed papers published during postdoctoral training. This manuscript reports on efforts to increase postdoctoral productivity. Method A single institution made postdoctoral training program changes designed to increase postdoctoral publication productivity. Postdoctoral publication productivity was compared between 114 trainees who matriculated prior to the changes and 20 trainees who matriculated after the changes. Results Postdoctoral trainees who matriculated after program changes had higher publication rates than postdoctoral trainees who matriculated prior to program changes [χ2(df= 15)=31.4, p=.002]. Four or more postdoctoral publications are associated with the greatest likelihood of sustained posttraining publications; postdocs matriculating after the program changes were more than twice as likely to have four or more publications (55 vs 26 %). Conclusions Postdoctoral program changes designed to increase postdoctoral publication rates can be successful. Defining, for each postdoc, a minimal postdoctoral publication rate may be an appropriate component of individualized development plans. PMID:25876090

A land cover change detection and classification protocol for updating Alaska NLCD 2001 to 2011

USGS Publications Warehouse

Jin, Suming; Yang, Limin; Zhu, Zhe; Homer, Collin G.

2017-01-01

Monitoring and mapping land cover changes are important ways to support evaluation of the status and transition of ecosystems. The Alaska National Land Cover Database (NLCD) 2001 was the first 30-m resolution baseline land cover product of the entire state derived from circa 2001 Landsat imagery and geospatial ancillary data. We developed a comprehensive approach named AKUP11 to update Alaska NLCD from 2001 to 2011 and provide a 10-year cyclical update of the state's land cover and land cover changes. Our method is designed to characterize the main land cover changes associated with different drivers, including the conversion of forests to shrub and grassland primarily as a result of wildland fire and forest harvest, the vegetation successional processes after disturbance, and changes of surface water extent and glacier ice/snow associated with weather and climate changes. For natural vegetated areas, a component named AKUP11-VEG was developed for updating the land cover that involves four major steps: 1) identify the disturbed and successional areas using Landsat images and ancillary datasets; 2) update the land cover status for these areas using a SKILL model (System of Knowledge-based Integrated-trajectory Land cover Labeling); 3) perform decision tree classification; and 4) develop a final land cover and land cover change product through the postprocessing modeling. For water and ice/snow areas, another component named AKUP11-WIS was developed for initial land cover change detection, removal of the terrain shadow effects, and exclusion of ephemeral snow changes using a 3-year MODIS snow extent dataset from 2010 to 2012. The overall approach was tested in three pilot study areas in Alaska, with each area consisting of four Landsat image footprints. The results from the pilot study show that the overall accuracy in detecting change and no-change is 90% and the overall accuracy of the updated land cover label for 2011 is 86%. The method provided a robust, consistent, and efficient means for capturing major disturbance events and updating land cover for Alaska. The method has subsequently been applied to generate the land cover and land cover change products for the entire state of Alaska.

In silico characterization of microbial electrosynthesis for metabolic engineering of biochemicals

PubMed Central

2011-01-01

Background A critical concern in metabolic engineering is the need to balance the demand and supply of redox intermediates such as NADH. Bioelectrochemical techniques offer a novel and promising method to alleviate redox imbalances during the synthesis of biochemicals and biofuels. Broadly, these techniques reduce intracellular NAD+ to NADH and therefore manipulate the cell's redox balance. The cellular response to such redox changes and the additional reducing power available to the cell can be harnessed to produce desired metabolites. In the context of microbial fermentation, these bioelectrochemical techniques can be used to improve product yields and/or productivity. Results We have developed a method to characterize the role of bioelectrosynthesis in chemical production using the genome-scale metabolic model of E. coli. The results in this paper elucidate the role of bioelectrosynthesis and its impact on biomass growth, cellular ATP yields and biochemical production. The results also suggest that strain design strategies can change for fermentation processes that employ microbial electrosynthesis and suggest that dynamic operating strategies lead to maximizing productivity. Conclusions The results in this paper provide a systematic understanding of the benefits and limitations of bioelectrochemical techniques for biochemical production and highlight how electrical enhancement can impact cellular metabolism and biochemical production. PMID:21967745

Let's Scrum! Learning Digital Media Collaboratively

ERIC Educational Resources Information Center

Wilson, Daniel G.; Brown, Joshua; Burke, Adam A.

2013-01-01

The changing landscape of digital media and software development has immense impact on society, not only through consumer use of the products, but also in the way these technologies are developed. Modern software and media-development companies are using collaborative methods to develop innovative and useful products. Technology and engineering…

Preliminary response of primary production and community composition to precipitation variation in a temperate grassland

USDA-ARS?s Scientific Manuscript database

a) Background/Questions/Methods Grassland ecosystems are water-limited and show the highest interannual ANPP variability across biomes. Changes in annual amounts or seasonality of rainfall may interact with soil texture to impact grassland ecosystem functions including net primary productivity (NPP...

The need for agriculture phenotyping: “Moving from genotype to phenotype”

USDA-ARS?s Scientific Manuscript database

Increase in the world population has called for the increased demand for agricultural productivity. Traditional methods to augment crop and animal production are facing exacerbating pressures in keeping up with population growth. This challenge has in turn led to the transformational change in the u...

Surfactant irritation: in vitro corneosurfametry and in vivo bioengineering.

PubMed

Gabard, B; Chatelain, E; Bieli, E; Haas, S

2001-02-01

Irritant reactions to surfactants, cleansing products, soaps and detergents are common in clinical and occupational dermatology. Mildness has become a major benefit claimed, and testing for mildness now ranks among the first concerns of the manufacturing industry. A wealth of publications deals with this problem, trying to improve the methodology, reduce the costs of testing and facilitate decision-making. Differences in vivo can be measured clinically and/or instrumentally. This is difficult, as commercially available products are generally safe to use and none are harsh in the absolute sense. Nineteen different products (syndets, shampoos, personal cleansers), all claiming to be mild, were tested in vitro by a newly introduced method, corneosurfametry. For evaluating the aggressiveness of the products, the calculation of an index of irritation (IOI) was proposed. A concentration-effect curve of sodium lauryl sulfate (SLS) as standard and model surfactant was obtained. Some of the products were further tested in vivo with a flex wash test and with a soap chamber test and compared to SLS. Bioengineering methods (transepidermal water loss TEWL, skin color) were used to evaluate the results. The results of the corneosurfametry allowed us to classify the products in three categories, with increasing aggressiveness towards the stratum corneum, according to their IOIs. The in vivo tests were not able to discriminate between the products, but ranks from the results of the bioengineering measurements showed a good correlation between TEWL changes, but not between colour changes, and IOIs from corneosurfametry. Corneosurfametry emerged as a simple, low-cost and fast method for ranking commercial products according to their mildness. However, the skin bioengineering techniques showed that some products could lead to skin reactions, such as erythema, that could not be detected by the in vitro technique.

Space Transportation Avionics Technology Symposium. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1990-01-01

The focus of the symposium was to examine existing and planned avionics technology processes and products and to recommend necessary changes for strengthening priorities and program emphases. Innovative changes in avionics technology development and design processes, identified during the symposium, are needed to support the increasingly complex, multi-vehicle, integrated, autonomous space-based systems. Key technology advances make such a major initiative viable at this time: digital processing capabilities, integrated on-board test/checkout methods, easily reconfigurable laboratories, and software design and production techniques.

Space Transportation Avionics Technology Symposium. Volume 2: Conference Proceedings

NASA Technical Reports Server (NTRS)

1990-01-01

The focus of the symposium was to examine existing and planned avionics technology processes and products and to recommend necessary changes for strengthening priorities and program emphases. Innovative changes in avionics technology development and design processes are needed to support the increasingly complex, multi-vehicle, integrated, autonomous space-based systems. Key technology advances make such a major initiative viable at this time: digital processing capabilities, integrated on-board test/checkout methods, easily reconfigurable laboratories, and software design and production techniques.

Developing a New North American Land Cover Product at 30m Resolution: Methods, Results and Future Plans

NASA Astrophysics Data System (ADS)

Homer, C.; Colditz, R. R.; Latifovic, R.; Llamas, R. M.; Pouliot, D.; Danielson, P.; Meneses, C.; Victoria, A.; Ressl, R.; Richardson, K.; Vulpescu, M.

2017-12-01

Land cover and land cover change information at regional and continental scales has become fundamental for studying and understanding the terrestrial environment. With recent advances in computer science and freely available image archives, continental land cover mapping has been advancing to higher spatial resolution products. The North American Land Change Monitoring System (NALCMS) remains the principal provider of seamless land cover maps of North America. Founded in 2006, this collaboration among the governments of Canada, Mexico and the United States has released two previous products based on 250m MODIS images, including a 2005 land cover and a 2005-2010 land cover change product. NALCMS has recently completed the next generation North America land cover product, based upon 30m Landsat images. This product now provides the first ever 30m land cover produced for the North American continent, providing 19 classes of seamless land cover. This presentation provides an overview of country-specific image classification processes, describes the continental map production process, provides results for the North American continent and discusses future plans. NALCMS is coordinated by the Commission for Environmental Cooperation (CEC) and all products can be obtained at their website - www.cec.org.

Estimating Seebeck Coefficient of a p-Type High Temperature Thermoelectric Material Using Bee Algorithm Multi-layer Perception

NASA Astrophysics Data System (ADS)

Uysal, Fatih; Kilinc, Enes; Kurt, Huseyin; Celik, Erdal; Dugenci, Muharrem; Sagiroglu, Selami

2017-08-01

Thermoelectric generators (TEGs) convert heat into electrical energy. These energy-conversion systems do not involve any moving parts and are made of thermoelectric (TE) elements connected electrically in a series and thermally in parallel; however, they are currently not suitable for use in regular operations due to their low efficiency levels. In order to produce high-efficiency TEGs, there is a need for highly heat-resistant thermoelectric materials (TEMs) with an improved figure of merit ( ZT). Production and test methods used for TEMs today are highly expensive. This study attempts to estimate the Seebeck coefficient of TEMs by using the values of existing materials in the literature. The estimation is made within an artificial neural network (ANN) based on the amount of doping and production methods. Results of the estimations show that the Seebeck coefficient can approximate the real values with an average accuracy of 94.4%. In addition, ANN has detected that any change in production methods is followed by a change in the Seebeck coefficient.

Engineering Change Management Method Framework in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Stekolschik, Alexander

2016-11-01

Engineering changes make an impact on different process chains in and outside the company, and lead to most error costs and time shifts. In fact, 30 to 50 per cent of development costs result from technical changes. Controlling engineering change processes can help us to avoid errors and risks, and contribute to cost optimization and a shorter time to market. This paper presents a method framework for controlling engineering changes at mechanical engineering companies. The developed classification of engineering changes and accordingly process requirements build the basis for the method framework. The developed method framework comprises two main areas: special data objects managed in different engineering IT tools and process framework. Objects from both areas are building blocks that can be selected to the overall business process based on the engineering process type and change classification. The process framework contains steps for the creation of change objects (both for overall change and for parts), change implementation, and release. Companies can select singleprocess building blocks from the framework, depending on the product development process and change impact. The developed change framework has been implemented at a division (10,000 employees) of a big German mechanical engineering company.

RECOVERY ACT - Methods for Decision under Technological Change Uncertainty and Risk Assessment for Integrated Assessment of Climate Change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Webster, Mort David

2015-03-10

This report presents the final outcomes and products of the project as performed at the Massachusetts Institute of Technology. The research project consists of three main components: methodology development for decision-making under uncertainty, improving the resolution of the electricity sector to improve integrated assessment, and application of these methods to integrated assessment. Results in each area is described in the report.

Studying Overt Word Reading and Speech Production with Event-Related fMRI: A Method for Detecting, Assessing, and Correcting Articulation-Induced Signal Changes and for Measuring Onset Time and Duration of Articulation

ERIC Educational Resources Information Center

Huang, Jie; Francis, Andrea P.; Carr, Thomas H.

2008-01-01

A quantitative method is introduced for detecting and correcting artifactual signal changes in BOLD time series data arising from the magnetic field warping caused by motion of the articulatory apparatus when speaking aloud, with extensions to detection of subvocal articulatory activity during silent reading. Whole-head images allow the large,…

Genotypic variation in traits controlling carbon flux responses to precipitation in switchgrass

USDA-ARS?s Scientific Manuscript database

Background/Questions/Methods Fluxes of carbon in terrestrial ecosystems are key indicators of their productivity and carbon storage potential. Ecosystem fluxes will be impacted by climate change, especially changes in rainfall amount. Fluxes may also be affected by plant traits, including abovegr...

Estimating Bacterial Production in Marine Waters from the Simultaneous Incorporation of Thymidine and Leucine

PubMed Central

Chin-Leo, Gerardo; Kirchman, David L.

1988-01-01

We examined the simultaneous incorporation of [3H]thymidine and [14C]leucine to obtain two independent indices of bacterial production (DNA and protein syntheses) in a single incubation. Incorporation rates of leucine estimated by the dual-label method were generally higher than those obtained by the single-label method, but the differences were small (dual/single = 1.1 ± 0.2 [mean ± standard deviation]) and were probably due to the presence of labeled leucyl-tRNA in the cold trichloroacetic acid-insoluble fraction. There were no significant differences in thymidine incorporation between dual- and single-label incubations (dual/ single = 1.03 ± 0.13). Addition of the two substrates in relatively large amounts (25 nM) did not apparently increase bacterial activity during short incubations (<5 h). With the dual-label method we found that thymidine and leucine incorporation rates covaried over depth profiles of the Chesapeake Bay. Estimates of bacterial production based on thymidine and leucine differed by less than 25%. Although the need for appropriate conversion factors has not been eliminated, the dual-label approach can be used to examine the variation in bacterial production while ensuring that the observed variation in incorporation rates is due to real changes in bacterial production rather than changes in conversion factors or introduction of other artifacts. PMID:16347706

Effect of feed-related farm characteristics on relative values of genetic traits in dairy cows to reduce greenhouse gas emissions along the chain.

PubMed

Van Middelaar, C E; Berentsen, P B M; Dijkstra, J; Van Arendonk, J A M; De Boer, I J M

2015-07-01

Breeding has the potential to reduce greenhouse gas (GHG) emissions from dairy farming. Evaluating the effect of a 1-unit change (i.e., 1 genetic standard deviation improvement) in genetic traits on GHG emissions along the chain provides insight into the relative importance of genetic traits to reduce GHG emissions. Relative GHG values of genetic traits, however, might depend on feed-related farm characteristics. The objective of this study was to evaluate the effect of feed-related farm characteristics on GHG values by comparing the values of milk yield and longevity for an efficient farm and a less efficient farm. The less efficient farm did not apply precision feeding and had lower feed production per hectare than the efficient farm. Greenhouse gas values of milk yield and longevity were calculated by using a whole-farm model and 2 different optimization methods. Method 1 optimized farm management before and after a change in genetic trait by maximizing labor income; the effect on GHG emissions (i.e., from production of farm inputs up to the farm gate) was considered a side effect. Method 2 optimized farm management after a change in genetic trait by minimizing GHG emissions per kilogram of milk while maintaining labor income and milk production at least at the level before the change in trait; the effect on labor income was considered a side effect. Based on maximizing labor income (method 1), GHG values of milk yield and longevity were, respectively, 279 and 143kg of CO2 equivalents (CO2e)/unit change per cow per year on the less efficient farm, and 247 and 210kg of CO2e/unit change per cow per year on the efficient farm. Based on minimizing GHG emissions (method 2), GHG values of milk yield and longevity were, respectively, 538 and 563kg of CO2e/unit change per cow per year on the less efficient farm, and 453 and 441kg of CO2e/unit change per cow per year on the efficient farm. Sensitivity analysis showed that, for both methods, the absolute effect of a change in genetic trait depends on model inputs, including prices and emission factors. Substantial changes in relative importance between traits due to a change in model inputs occurred only in case of maximizing labor income. We concluded that assumptions regarding feed-related farm characteristics affect the absolute level of GHG values, as well as the relative importance of traits to reduce emissions when using a method based on maximizing labor income. This is because optimizing farm management based on maximizing labor income does not give any incentive for lowering GHG emissions. When using a method based on minimizing GHG emissions, feed-related farm characteristics affected the absolute level of the GHG values, but the relative importance of the traits scarcely changed: at each level of efficiency, milk yield and longevity were equally important. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Climate analogues suggest limited potential for intensification of production on current croplands under climate change

PubMed Central

Pugh, T.A.M.; Müller, C.; Elliott, J.; Deryng, D.; Folberth, C.; Olin, S.; Schmid, E.; Arneth, A.

2016-01-01

Climate change could pose a major challenge to efforts towards strongly increase food production over the coming decades. However, model simulations of future climate-impacts on crop yields differ substantially in the magnitude and even direction of the projected change. Combining observations of current maximum-attainable yield with climate analogues, we provide a complementary method of assessing the effect of climate change on crop yields. Strong reductions in attainable yields of major cereal crops are found across a large fraction of current cropland by 2050. These areas are vulnerable to climate change and have greatly reduced opportunity for agricultural intensification. However, the total land area, including regions not currently used for crops, climatically suitable for high attainable yields of maize, wheat and rice is similar by 2050 to the present-day. Large shifts in land-use patterns and crop choice will likely be necessary to sustain production growth rates and keep pace with demand. PMID:27646707

Climate Analogues Suggest Limited Potential for Intensification of Production on Current Croplands Under Climate Change

NASA Technical Reports Server (NTRS)

Pugh, T. A. M.; Mueller, C.; Elliott, J.; Deryng, D.; Folberth, C.; Olin, S.; Schmid, E.; Arneth, A.

2016-01-01

Climate change could pose a major challenge to efforts towards strongly increase food production over the coming decades. However, model simulations of future climate-impacts on crop yields differ substantially in the magnitude and even direction of the projected change. Combining observations of current maximum-attainable yield with climate analogues, we provide a complementary method of assessing the effect of climate change on crop yields. Strong reductions in attainable yields of major cereal crops are found across a large fraction of current cropland by 2050. These areas are vulnerable to climate change and have greatly reduced opportunity for agricultural intensification. However, the total land area, including regions not currently used for crops, climatically suitable for high attainable yields of maize, wheat and rice is similar by 2050 to the present-day. Large shifts in land-use patterns and crop choice will likely be necessary to sustain production growth rates and keep pace with demand.

Climate analogues suggest limited potential for intensification of production on current croplands under climate change

NASA Astrophysics Data System (ADS)

Pugh, T. A. M.; Müller, C.; Elliott, J.; Deryng, D.; Folberth, C.; Olin, S.; Schmid, E.; Arneth, A.

2016-09-01

Climate change could pose a major challenge to efforts towards strongly increase food production over the coming decades. However, model simulations of future climate-impacts on crop yields differ substantially in the magnitude and even direction of the projected change. Combining observations of current maximum-attainable yield with climate analogues, we provide a complementary method of assessing the effect of climate change on crop yields. Strong reductions in attainable yields of major cereal crops are found across a large fraction of current cropland by 2050. These areas are vulnerable to climate change and have greatly reduced opportunity for agricultural intensification. However, the total land area, including regions not currently used for crops, climatically suitable for high attainable yields of maize, wheat and rice is similar by 2050 to the present-day. Large shifts in land-use patterns and crop choice will likely be necessary to sustain production growth rates and keep pace with demand.

A Flexible Electronic Commerce Recommendation System

NASA Astrophysics Data System (ADS)

Gong, Songjie

Recommendation systems have become very popular in E-commerce websites. Many of the largest commerce websites are already using recommender technologies to help their customers find products to purchase. An electronic commerce recommendation system learns from a customer and recommends products that the customer will find most valuable from among the available products. But most recommendation methods are hard-wired into the system and they support only fixed recommendations. This paper presented a framework of flexible electronic commerce recommendation system. The framework is composed by user model interface, recommendation engine, recommendation strategy model, recommendation technology group, user interest model and database interface. In the recommender strategy model, the method can be collaborative filtering, content-based filtering, mining associate rules method, knowledge-based filtering method or the mixed method. The system mapped the implementation and demand through strategy model, and the whole system would be design as standard parts to adapt to the change of the recommendation strategy.

Vulnerability of Thai rice production to simultaneous climate and socioeconomic changes: a double exposure analysis

NASA Astrophysics Data System (ADS)

Sangpenchan, R.

2011-12-01

This research explores the vulnerability of Thai rice production to simultaneous exposure by climate and socioeconomic change -- so-called "double exposure." Both processes influence Thailand's rice production system, but the vulnerabilities associated with their interactions are unknown. To understand this double exposure, I adopts a mixed-method, qualitative-quantitative analytical approach consisting of three phases of analysis involving a Vulnerability Scoping Diagram, a Principal Component Analysis, and the EPIC crop model using proxy datasets collected from secondary data sources at provincial scales.The first and second phases identify key variables representing each of the three dimensions of vulnerability -- exposure, sensitivity, and adaptive capacity indicating that the greatest vulnerability in the rice production system occurs in households and areas with high exposure to climate change, high sensitivity to climate and socioeconomic stress, and low adaptive capacity. In the third phase, the EPIC crop model simulates rice yields associated with future climate change projected by CSIRO and MIROC climate models. Climate change-only scenarios project the decrease in yields by 10% from the current productivity during 2016-2025 and 30% during 2045-2054. Scenarios applying both climate change and improved technology and management practices show that a 50% increase in rice production is possible, but requires strong collaboration between sectors to advance agricultural research and technology and requires strong adaptive capacity in the rice production system characterized by well-developed social capital, social networks, financial capacity, and infrastructure and household mobility at the local scale. The vulnerability assessment and climate and crop adaptation simulations used here provide useful information to decision makers developing vulnerability reduction plans in the face of concurrent climate and socioeconomic change.

Assessment of higher order structure comparability in therapeutic proteins using nuclear magnetic resonance spectroscopy.

PubMed

Amezcua, Carlos A; Szabo, Christina M

2013-06-01

In this work, we applied nuclear magnetic resonance (NMR) spectroscopy to rapidly assess higher order structure (HOS) comparability in protein samples. Using a variation of the NMR fingerprinting approach described by Panjwani et al. [2010. J Pharm Sci 99(8):3334-3342], three nonglycosylated proteins spanning a molecular weight range of 6.5-67 kDa were analyzed. A simple statistical method termed easy comparability of HOS by NMR (ECHOS-NMR) was developed. In this method, HOS similarity between two samples is measured via the correlation coefficient derived from linear regression analysis of binned NMR spectra. Applications of this method include HOS comparability assessment during new product development, manufacturing process changes, supplier changes, next-generation products, and the development of biosimilars to name just a few. We foresee ECHOS-NMR becoming a routine technique applied to comparability exercises used to complement data from other analytical techniques. Copyright © 2013 Wiley Periodicals, Inc.

Changes in land use and housing on resource lands in Washington state, 1976–2006

Treesearch

Andrew N. Gray; David L. Azuma; Gary J. Lettman; Joel L. Thompson; Neil McKay

2013-01-01

Changes in human land use patterns have wide-ranging social, economic and ecological implications. How urban and residential areas develop to accommodate population increase can have varying effects on forest and agricultural production from resource lands. Estimates of the amount and type of land use change differ substantially with definitions and analytical methods...

40 CFR Appendix A to Subpart Mmmm... - Alternative Capture Efficiency and Destruction Efficiency Measurement and Monitoring Procedures...

Code of Federal Regulations, 2013 CFR

2013-07-01

... change from job to job. The air balance in magnet wire ovens is critical to product quality. Magnet wire... Method D5291-02, “Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen...

40 CFR Appendix A to Subpart Mmmm... - Alternative Capture Efficiency and Destruction Efficiency Measurement and Monitoring Procedures...

Code of Federal Regulations, 2014 CFR

2014-07-01

... change from job to job. The air balance in magnet wire ovens is critical to product quality. Magnet wire... Method D5291-02, “Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen...

40 CFR Appendix A to Subpart Mmmm... - Alternative Capture Efficiency and Destruction Efficiency Measurement and Monitoring Procedures...

Code of Federal Regulations, 2012 CFR

2012-07-01

... change from job to job. The air balance in magnet wire ovens is critical to product quality. Magnet wire... Method D5291-02, “Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen...

40 CFR Appendix A to Subpart Mmmm... - Alternative Capture Efficiency and Destruction Efficiency Measurement and Monitoring Procedures...

Code of Federal Regulations, 2011 CFR

2011-07-01

... change from job to job. The air balance in magnet wire ovens is critical to product quality. Magnet wire... Method D5291-02, “Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen...

40 CFR Appendix A to Subpart Mmmm... - Alternative Capture Efficiency and Destruction Efficiency Measurement and Monitoring Procedures...

Code of Federal Regulations, 2010 CFR

2010-07-01

... change from job to job. The air balance in magnet wire ovens is critical to product quality. Magnet wire... Method D5291-02, “Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen...

[On-Orbit Multispectral Sensor Characterization Based on Spectral Tarps].

PubMed

Li, Xin; Zhang, Li-ming; Chen, Hong-yao; Xu, Wei-wei

2016-03-01

The multispectral remote sensing technology has been a primary means in the research of biomass monitoring, climate change, disaster prediction and etc. The spectral sensitivity is essential in the quantitative analysis of remote sensing data. When the sensor is running in the space, it will be influenced by cosmic radiation, severe change of temperature, chemical molecular contamination, cosmic dust and etc. As a result, the spectral sensitivity will degrade by time, which has great implication on the accuracy and consistency of the physical measurements. This paper presents a characterization method of the degradation based on man-made spectral targets. Firstly, a degradation model is established in the paper. Then, combined with equivalent reflectance of spectral targets measured and inverted from image, the degradation characterization can be achieved. The simulation and on orbit experiment results showed that, using the proposed method, the change of center wavelength and band width can be monotored. The method proposed in the paper has great significance for improving the accuracy of long time series remote sensing data product and comprehensive utilization level of multi sensor data products.

Data-model synthesis of grassland carbon metabolism. Quantifying direct, indirect & interactive effects of warming & elevated CO 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pendall, Elise; Ogle, Kiona; Parton, William

2016-02-29

This research project improved understanding of how climate change (elevated atmospheric CO 2, warming and altered precipitation) can affect grassland ecosystem productivity and nutrient availability. Our advanced experimental and modeling methods allowed us to test 21 specific hypotheses. We found that ecosystem changes over years of exposure to climate change can shift the plant communities and potentially make them more resilient to future climate changes. These changes in plant communities may be related to increased growth of belowground roots and enhanced nutrient uptake by some species. We also found that climate change can increase the spread of invasive and noxiousmore » weeds. These findings are important for land managers to make adaptive planning decisions for domestic livestock production in response to climate variability in semi-arid grasslands.« less

Trend Change Detection in NDVI Time Series: Effects of Inter-Annual Variability and Methodology

NASA Technical Reports Server (NTRS)

Forkel, Matthias; Carvalhais, Nuno; Verbesselt, Jan; Mahecha, Miguel D.; Neigh, Christopher S.R.; Reichstein, Markus

2013-01-01

Changing trends in ecosystem productivity can be quantified using satellite observations of Normalized Difference Vegetation Index (NDVI). However, the estimation of trends from NDVI time series differs substantially depending on analyzed satellite dataset, the corresponding spatiotemporal resolution, and the applied statistical method. Here we compare the performance of a wide range of trend estimation methods and demonstrate that performance decreases with increasing inter-annual variability in the NDVI time series. Trend slope estimates based on annual aggregated time series or based on a seasonal-trend model show better performances than methods that remove the seasonal cycle of the time series. A breakpoint detection analysis reveals that an overestimation of breakpoints in NDVI trends can result in wrong or even opposite trend estimates. Based on our results, we give practical recommendations for the application of trend methods on long-term NDVI time series. Particularly, we apply and compare different methods on NDVI time series in Alaska, where both greening and browning trends have been previously observed. Here, the multi-method uncertainty of NDVI trends is quantified through the application of the different trend estimation methods. Our results indicate that greening NDVI trends in Alaska are more spatially and temporally prevalent than browning trends. We also show that detected breakpoints in NDVI trends tend to coincide with large fires. Overall, our analyses demonstrate that seasonal trend methods need to be improved against inter-annual variability to quantify changing trends in ecosystem productivity with higher accuracy.

Low cost routes to high purity silicon and derivatives thereof

DOEpatents

Laine, Richard M; Krug, David James; Marchal, Julien Claudius; Mccolm, Andrew Stewart

2013-07-02

The present invention is directed to a method for providing an agricultural waste product having amorphous silica, carbon, and impurities; extracting from the agricultural waste product an amount of the impurities; changing the ratio of carbon to silica; and reducing the silica to a high purity silicon (e.g., to photovoltaic silicon).

Effects of diet and manure storage method on carbon and nitrogen dynamics during storage and plant nitrogen uptake

USDA-ARS?s Scientific Manuscript database

Altering dairy cattle diets to reduce both enteric methane (CH4) production and nitrogen (N) excretion are valuable tools for mitigating the environmental impact of dairy production. We examined the impact of altering diets on changes in physicochemical properties of manure during storage, short ter...

Addressing multi-use issues in sustainable forest management with signal-transfer modeling

Treesearch

Robert J. Luxmoore; William W. Hargrove; M. Lynn Tharp; W. Mac Post; Michael W. Berry; Karen S. Minser; Wendell P. Cropper; Dale W. Johnson; Boris Zeide; Ralph L. Amateis; Harold E. Burkhart; V. Clark Baldwin; Kelly D. Peterson

2002-01-01

Management decisions concerning impacts of projected changes in environmental and social conditions on multi-use forest products and services, such as productivity, water supply or carbon sequestration, may be facilitated with signal-transfer modeling. This simulation method utilizes a hierarchy of simulators in which the integrated responses (signals) from smaller-...

How Tenure in Higher Education Relates to Faculty Productivity and Retention

ERIC Educational Resources Information Center

Manjounes, Cindy Kay

2016-01-01

Some public university systems are considering abolishing tenure as a cost-saving mechanism, but little is known about how this change may impact organizational outcomes related to faculty retention and research productivity. Using Almendarez' human capital theory, the purpose of this concurrent mixed methods study was to explore how tenure…

Vat rates on medical devices: foreign experience and Ukrainian practice.

PubMed

Pashkov, Vitalii; Hutorova, Nataliia; Harkusha, Andrii

2017-01-01

In Ukraine differentiated VAT rates is a matter of debate. Today the Cabinet approved a list of medical products that has been changed three times resulting in changed VAT rates for specific products. European Union provides another method of regulation of VAT rates on medical devices. The abovementioned demonstrates the relevance of this study. Comparative analysis of Ukrainian and European Union legislation based on dialectical, comparative, analytic, synthetic and comprehensive research methods were used in this article. In Ukraine general rate of VAT for all business activities is 20 %. But for medical devices, Tax Code of Ukraine provides special rules. VAT rate of 7% for transactions supplies into Ukraine and imported into the customs territory of Ukraine of medical products on the list approved by the Cabinet. The list generated by the medical product name and nomenclature code that does not correspond to European experience and Council Directive 2006/112/EC. In our opinion, reduced VAT rates should to be established for all medical devices that are in a stream of commerce, have all necessary documents, that proved their quality and safety and fall under definition of medical devices.

[Determination of obacunone and obaculactone in different processing products of Phellodendri amurensis cortex].

PubMed

Zhang, Chao

2013-02-01

To study the impact of different processing methods on the content of limonin compounds in Phellodendri Amurensis Cortex. Used RP-HPLC method to determine the content of obacunone and obaculactone in different processing products of Phellodendri Amurensis Cortex. The chromatographic separation was carried out on Kromasil C18 (250 mm x 4.6 mm,5 micro m), with mobile phase of acetonitrile and water (50: 50) at a flow rate of 1.0 mL/min. The column temperature was 25 degrees C and the detection wavelength was 205 nm. The content of obacunone and obaculactone had significant differences in different processing products. The sequence of the content changes of obacunone was as follows: raw products > fried carbon products > wine fried products salt fried products. The content of obaculactone was fried carbon products approximately wine fried products approximately salt fried products > raw products. The loss of obacunone in fried carbon products is much more than that of wine fried products or salt fried products. The content of obaculactone have similar degree of increase, increasing rate is 18.15%, 15.62% and 15.84%, respectively.

Use of artificial intelligence in the production of high quality minced meat

NASA Astrophysics Data System (ADS)

Kapovsky, B. R.; Pchelkina, V. A.; Plyasheshnik, P. I.; Dydykin, A. S.; Lazarev, A. A.

2017-09-01

A design for an automatic line for minced meat production according to new production technology based on an innovative meat milling method is proposed. This method allows the necessary degree of raw material comminution at the stage of raw material preparation to be obtained, which leads to production intensification due to the traditional meat mass comminution equipment being unnecessary. To ensure consistent quality of the product obtained, the use of on-line automatic control of the technological process for minced meat production is envisaged. This system has been developed using artificial intelligence methods and technologies. The system is trainable during the operation process, adapts to changes in processed raw material characteristics and to external impacts that affect the system operation, and manufactures meat shavings with minimal dispersion of the typical particle size. The control system includes equipment for express analysis of the chemical composition of the minced meat and its temperature after comminution. In this case, the minced meat production process can be controlled strictly as a function of time, which excludes subjective factors for assessing the degree of finished product readiness. This will allow finished meat products with consistent, targeted high quality to be produced.

Volatile organic compounds at two oil and natural gas production well pads in Colorado and Texas using passive samplers.

PubMed

Eisele, Adam P; Mukerjee, Shaibal; Smith, Luther A; Thoma, Eben D; Whitaker, Donald A; Oliver, Karen D; Wu, Tai; Colon, Maribel; Alston, Lillian; Cousett, Tamira A; Miller, Michael C; Smith, Donald M; Stallings, Casson

2016-04-01

A pilot study was conducted in application of the U.S. Environmental Protection Agency (EPA) Methods 325A/B variant for monitoring volatile organic compounds (VOCs) near two oil and natural gas (ONG) production well pads in the Texas Barnett Shale formation and Colorado Denver-Julesburg Basin (DJB), along with a traffic-dominated site in downtown Denver, CO. As indicated in the EPA method, VOC concentrations were measured for 14-day sampling periods using passive-diffusive tube samplers with Carbopack X sorbent at fenceline perimeter and other locations. VOCs were significantly higher at the DJB well pad versus the Barnett well pad and were likely due to higher production levels at the DJB well pad during the study. Benzene and toluene were significantly higher at the DJB well pad versus downtown Denver. Except for perchloroethylene, VOCs measured at passive sampler locations (PSs) along the perimeter of the Barnett well pad were significantly higher than PSs farther away. At the DJB well pad, most VOC concentrations, except perchloroethylene, were significantly higher prior to operational changes than after these changes were made. Though limited, the results suggest passive samplers are precise (duplicate precision usually ≤10%) and that they can be useful to assess spatial gradients and operational conditions at well pad locations over time-integrated periods. Recently enacted EPA Methods 325A/B use passive-diffusive tube samplers to measure benzene at multiple fenceline locations at petrochemical refineries. This pilot study presents initial data demonstrating the utility of Methods 325A/B for monitoring at ONG facilities. Measurements revealed elevated concentrations reflective of production levels and spatial gradients of VOCs relative to source proximity at the Barnett well pad, as well as operational changes at the DJB well pad. Though limited, these findings indicate that Methods 325A/B can be useful in application to characterize VOCs at well pad boundaries.

Ellipsometry-like analysis of polarization state for micro cracks using stress-induced light scattering method

NASA Astrophysics Data System (ADS)

Sakata, Yoshitaro; Terasaki, Nao; Sakai, Kazufumi; Nonaka, Kazuhiro

2016-03-01

Fine polishing techniques, such as chemical mechanical polishing (CMP), are important to glass substrate manufacturing. When these techniques involve mechanical interaction in the form of friction between the abrasive and the substrate surface during polishing, latent flaws may form on the product. Fine polishing induced latent flaws in glass substrates may become obvious during a subsequent cleaning process if the glass surface is eroded away by chemical interaction with a cleaning liquid. Thus, latent flaws reduce product yield. A novel technique (the stress-induced light scattering method; SILSM) which was combined with light scattering method and stress effects was proposed for inspecting surface to detect polishing induced latent flaws. This method is able to distinguish between latent flaws and tiny particles on the surface. In this method, an actuator deforms a sample inducing stress effects around the tip of a latent flaw caused by the deformation, which in turn changes the refractive index of the material around the tip of the latent flaw because of the photoelastic effect. A CCD camera detects this changed refractive index as variations in light-scattering intensity. In this study, the changes in reflection coefficients and polarization states after application of stress to a glass substrate were calculated and evaluated qualitatively using Jones matrix-like ellipsometry. As the results, it was shown that change in the polarization states around the tip of latent flaw were evaluated between before and after applied stress, qualitatively.

A Method to Reveal Fine-Grained and Diverse Conceptual Progressions during Learning

ERIC Educational Resources Information Center

Lombard, François; Merminod, Marie; Widmer, Vincent; Schneider, Daniel K.

2018-01-01

Empirical data on learners' conceptual progression is required to design curricula and guide students. In this paper, we present the Reference Map Change Coding (RMCC) method for revealing students' progression at a fine-grained level. The method has been developed and tested through the analysis of successive versions of the productions of eight…

Fields of dreams: Agriculture, economy and nature in Midwest United States biofuel production

NASA Astrophysics Data System (ADS)

Gillon, Sean Thomas

This work explores the social and ecological dimensions of recent biofuel production increases in the United States (US), focusing on the case of Iowa. Biofuels are proposed to mitigate the greenhouse gas emissions that cause climate change, improve US energy security, and support rural economies. Little research has examined how increased US Midwestern biofuels production will change social and ecological outcomes at farm and regional levels or interact with broader governance processes at the nexus of agriculture, energy and environment. These broad questions guide my research: (1) How does biofuel production reconfigure agricultural practice and landscapes in Iowa? (2) What are the costs, benefits and risks of increased biofuels production as seen by farmers and rural residents, and how do these factors influence farmer decisions about agriculture and conservation practice? (3) How and with what effects are biofuels initiatives constituted as a form of environmental governance through scientific knowledge and practice and political economic dynamics? To address these questions, this research integrates both qualitative and quantitative methods, drawing on a political ecological approach complemented by agroecological analysis and theoretical insights from geographical analyses of nature-society relations. Quantitative analysis focuses on changing land use patterns in agriculture and conservation practice in Iowa. Qualitative methods include extensive interviews, participant observation, and policy and document analyses. Fieldwork focused on Northeastern Iowa to understand regional changes in agricultural and conservation practice, the renegotiated position of farmers in agriculture and biofuel production, and biofuel industry development. I find that biofuel production presents significant social and ecological challenges for rural places of production. Longstanding, unequal political economic relations in industrialized agriculture limit rural economic benefits. I describe how biofuel governance focuses on scientific practices that legitimize biofuel production for their capacity to marginally reduce greenhouse gas emissions, despite biofuels' agroecological consequences outside this regulatory purview. These consequences include pressure on conservation and agrienvironmental practice, which could be better supported through existing, highly effective, place-based, democratic institutions dedicated to stewarding the resources upon which agricultural livelihoods depend.

Vegetation Response to Climate Change in the Southern Part of Qinghai-Tibet Plateau at Basinal Scale

NASA Astrophysics Data System (ADS)

Liu, X.; Liu, C.; Kang, Q.; Yin, B.

2018-04-01

Global climate change has significantly affected vegetation variation in the third-polar region of the world - the Qinghai-Tibet Plateau. As one of the most important indicators of vegetation variation (growth, coverage and tempo-spatial change), the Normalized Difference Vegetation Index (NDVI) is widely employed to study the response of vegetation to climate change. However, a long-term series analysis cannot be achieved because a single data source is constrained by time sequence. Therefore, a new framework was presented in this paper to extend the product series of monthly NDVI, taking as an example the Yarlung Zangbo River Basin, one of the most important river basins in the Qinghai-Tibet Plateau. NDVI products were acquired from two public sources: Global Inventory Modeling and Mapping Studies (GIMMS) Advanced Very High Resolution Radiometer (AVHRR) and Moderate-Resolution Imaging spectroradiometer (MODIS). After having been extended using the new framework, the new time series of NDVI covers a 384 months period (1982-2013), 84 months longer than previous time series of NDVI product, greatly facilitating NDVI related scientific research. In the new framework, the Gauss Filtering Method was employed to filter out noise in the NDVI product. Next, the standard method was introduced to enhance the comparability of the two data sources, and a pixel-based regression method was used to construct NDVI-extending models with one pixel after another. The extended series of NDVI fit well with original AVHRR-NDVI. With the extended time-series, temporal trends and spatial heterogeneity of NDVI in the study area were studied. Principal influencing factors on NDVI were further determined. The monthly NDVI is highly correlated with air temperature and precipitation in terms of climatic change wherein the spatially averaged NDVI slightly increases in the summer and has increased in temperature and decreased in precipitation in the 32 years period. The spatial heterogeneity of NDVI is in accordance with the seasonal variation of the two climate-change factors. All of these findings can provide valuable scientific support for water-land resources exploration in the third-polar region of the world.

Similar negative impacts of temperature on global wheat yield estimated by three independent methods

USDA-ARS?s Scientific Manuscript database

The potential impact of global temperature change on global wheat production has recently been assessed with different methods, scaling and aggregation approaches. Here we show that grid-based simulations, point-based simulations, and statistical regressions produce similar estimates of temperature ...

Assessment of Environmental Impacts of Limestone Quarrying Operations in Thailand

NASA Astrophysics Data System (ADS)

Kittipongvises, Suthirat

2017-11-01

Environmental impacts of the mineral extraction have been a public concern. Presently, there is widespread global interest in the area of mining and its sustainability that focused on the need to shift mining industry to a more sustainable framework. The aim of this study was to systematically assess all possible environmental and climate change related impacts of the limestone quarrying operation in Thailand. By considering the life cycle assessment method, the production processes were divided into three phases: raw material extraction, transportation, and comminution. Both IMPACT 2002+ and the Greenhouse Gas Protocol methods were used. Results of IMPACT 2002+ analysis showed that per 1 ton crushed limestone rock production, the total depletion of resource and GHGs emissions were 79.6 MJ and 2.76 kg CO2 eq., respectively. Regarding to the four damage categories, `resources' and `climate change' categories were the two greatest environmental impacts of the limestone rock production. Diesel fuel and electricity consumption in the mining processes were the main causes of those impacts. For climate change, the unit of CO2 eq. was expressed to quantify the total GHGs emissions. Estimated result was about 3.13 kg CO2 eq. per ton limestone rock product. The results obtained by the Greenhouse Gas Protocol were also similar to IMPACT 2002+ method. Electrical energy consumption was considered as the main driver of GHGs, accounting for approximately 46.8 % of total fossil fuel CO2 emissions. A final point should be noted that data uncertainties in environmental assessment over the complete life cycle of limestone quarrying operation have to be carefully considered.

Colour, phenolic content and antioxidant capacity of some fruits dehydrated by a combination of different methods.

PubMed

Chong, Chien Hwa; Law, Chung Lim; Figiel, Adam; Wojdyło, Aneta; Oziembłowski, Maciej

2013-12-15

The objective of this study was to improve product quality of dehydrated fruits (apple, pear, papaya, mango) using combined drying techniques. This involved investigation of bioactivity, colour, and sensory assessment on colour of the dried products as well as the retention of the bio-active ingredients. The attributes of quality were compared in regard to the quality of dehydrated samples obtained from continuous heat pump (HP) drying technique. It was found that for apple, pear and mango the total colour change (ΔE) of samples dried using continuous heat pump (HP) or heat pump vacuum-microwave (HP/VM) methods was lower than of samples dried by other combined methods. However, for papaya, the lowest colour change exhibited by samples dried using hot air-cold air (HHC) method and the highest colour change was found for heat pump (HP) dehydrated samples. Sensory evaluation revealed that dehydrated pear with higher total colour change (ΔE) is more desirable because of its golden yellow appearance. In most cases the highest phenol content was found from fruits dried by HP/VM method. Judging from the quality findings on two important areas namely colour and bioactivity, it was found that combined drying method consisted of HP pre-drying followed by VM finish drying gave the best results for most dehydrated fruits studied in this work as the fruits contain first group of polyphenol compounds, which preferably requires low temperature followed by rapid drying strategy. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Forest carbon in North America: annual storage and emissions from British Columbia’s harvest, 1965–2065

PubMed Central

2012-01-01

Background The default international accounting rules estimate the carbon emissions from forest products by assuming all harvest is immediately emitted to the atmosphere. This makes it difficult to assess the greenhouse gas (GHG) consequences of different forest management or manufacturing activities that maintain the storage of carbon. The Intergovernmental Panel on Climate Change (IPCC) addresses this issue by allowing other accounting methods. The objective of this paper is to provide a new model for estimating annual stock changes of carbon in harvested wood products (HWP). Results The model, British Columbia Harvested Wood Products version 1 (BC-HWPv1), estimates carbon stocks and fluxes for wood harvested in BC from 1965 to 2065, based on new parameters on local manufacturing, updated and new information for North America on consumption and disposal of wood and paper products, and updated parameters on methane management at landfills in the USA. Based on model results, reporting on emissions as they occur would substantially lower BC’s greenhouse gas inventory in 2010 from 48 Mt CO2 to 26 Mt CO2 because of the long-term forest carbon storage in-use and in the non-degradable material in landfills. In addition, if offset projects created under BC’s protocol reported 100 year cumulative emissions using the BC-HWPv1 the emissions would be lower by about 11%. Conclusions This research showed that the IPCC default methods overestimate the emissions North America wood products. Future IPCC GHG accounting methods could include a lower emissions factor (e.g. 0.52) multiplied by the annual harvest, rather than the current multiplier of 1.0. The simulations demonstrated that the primary opportunities for climate change mitigation are in shifting from burning mill waste to using the wood for longer-lived products. PMID:22828161

Lignin from Micro- to Nanosize: Production Methods

PubMed Central

Beisl, Stefan; Miltner, Angela; Friedl, Anton

2017-01-01

Lignin is the second most abundant biopolymer after cellulose. It has long been obtained as a by-product of cellulose production in pulp and paper production, but had rather low added-value applications. A changing paper market and the emergence of biorefinery projects should generate vast amounts of lignin with the potential of value addition. Nanomaterials offer unique properties and the preparation of lignin nanoparticles and other nanostructures has therefore gained interest as a promising technique to obtain value-added lignin products. Due to lignin’s high structural and chemical heterogeneity, methods must be adapted to these different types. This review focuses on the ability of different formation methods to cope with the huge variety of lignin types and points out which particle characteristics can be achieved by which method. The current research’s main focus is on pH and solvent-shifting methods where the latter can yield solid and hollow particles. Solvent shifting also showed the capability to cope with different lignin types and solvents and antisolvents, respectively. However, process conditions have to be adapted to every type of lignin and reduction of solvent demand or the integration in a biorefinery process chain must be focused. PMID:28604584

Novel image cytometric method for detection of physiological and metabolic changes in Saccharomyces cerevisiae.

PubMed

Chan, Leo L; Kury, Alexandria; Wilkinson, Alisha; Berkes, Charlotte; Pirani, Alnoor

2012-11-01

The studying and monitoring of physiological and metabolic changes in Saccharomyces cerevisiae (S. cerevisiae) has been a key research area for the brewing, baking, and biofuels industries, which rely on these economically important yeasts to produce their products. Specifically for breweries, physiological and metabolic parameters such as viability, vitality, glycogen, neutral lipid, and trehalose content can be measured to better understand the status of S. cerevisiae during fermentation. Traditionally, these physiological and metabolic changes can be qualitatively observed using fluorescence microscopy or flow cytometry for quantitative fluorescence analysis of fluorescently labeled cellular components associated with each parameter. However, both methods pose known challenges to the end-users. Specifically, conventional fluorescent microscopes lack automation and fluorescence analysis capabilities to quantitatively analyze large numbers of cells. Although flow cytometry is suitable for quantitative analysis of tens of thousands of fluorescently labeled cells, the instruments require a considerable amount of maintenance, highly trained technicians, and the system is relatively expensive to both purchase and maintain. In this work, we demonstrate the first use of Cellometer Vision for the kinetic detection and analysis of vitality, glycogen, neutral lipid, and trehalose content of S. cerevisiae. This method provides an important research tool for large and small breweries to study and monitor these physiological behaviors during production, which can improve fermentation conditions to produce consistent and higher-quality products.

Time-Varying Transition Probability Matrix Estimation and Its Application to Brand Share Analysis.

PubMed

Chiba, Tomoaki; Hino, Hideitsu; Akaho, Shotaro; Murata, Noboru

2017-01-01

In a product market or stock market, different products or stocks compete for the same consumers or purchasers. We propose a method to estimate the time-varying transition matrix of the product share using a multivariate time series of the product share. The method is based on the assumption that each of the observed time series of shares is a stationary distribution of the underlying Markov processes characterized by transition probability matrices. We estimate transition probability matrices for every observation under natural assumptions. We demonstrate, on a real-world dataset of the share of automobiles, that the proposed method can find intrinsic transition of shares. The resulting transition matrices reveal interesting phenomena, for example, the change in flows between TOYOTA group and GM group for the fiscal year where TOYOTA group's sales beat GM's sales, which is a reasonable scenario.

Time-Varying Transition Probability Matrix Estimation and Its Application to Brand Share Analysis

PubMed Central

Chiba, Tomoaki; Akaho, Shotaro; Murata, Noboru

2017-01-01

In a product market or stock market, different products or stocks compete for the same consumers or purchasers. We propose a method to estimate the time-varying transition matrix of the product share using a multivariate time series of the product share. The method is based on the assumption that each of the observed time series of shares is a stationary distribution of the underlying Markov processes characterized by transition probability matrices. We estimate transition probability matrices for every observation under natural assumptions. We demonstrate, on a real-world dataset of the share of automobiles, that the proposed method can find intrinsic transition of shares. The resulting transition matrices reveal interesting phenomena, for example, the change in flows between TOYOTA group and GM group for the fiscal year where TOYOTA group’s sales beat GM’s sales, which is a reasonable scenario. PMID:28076383

Remote sensing for assessing the zone of benefit where deep drains improve productivity of land affected by shallow saline groundwater.

PubMed

Kobryn, H T; Lantzke, R; Bell, R; Admiraal, R

2015-03-01

The installation of deep drains is an engineering approach to remediate land salinised by the influence of shallow groundwater. It is a costly treatment and its economic viability is, in part, dependent on the lateral extent to which the drain increases biological productivity by lowering water tables and soil salinity (referred to as the drains' zone of benefit). Such zones may be determined by assessing the biological productivity response of adjacent vegetation over time. We tested a multi-temporal satellite remote sensing method to analyse temporal and spatial changes in vegetation condition surrounding deep drainage sites at five locations in the Western Australian wheatbelt affected by dryland salinity-Morawa, Pithara, Beacon, Narembeen and Dumbleyung. Vegetation condition as a surrogate for biological productivity was assessed by Normalised Difference Vegetation Index (NDVI) during the peak growing season. Analysis was at the site scale within a 1000 m buffer zone from the drains. There was clear evidence of NDVI increasing with elevation, slope and distance from the drain. After accounting for elevation, slope and distance from the drain, there was a significant increase in NDVI across the five locations after installation of deep drains. Changes in NDVI after drainage were broadly consistent with measured changes at each site in groundwater levels after installation of the deep drains. However, this study assessed the lateral extent of benefit for biological productivity and gave a measure of the area of benefit along the entire length of the drain. The method demonstrated the utility of spring NDVI images for rapid and relatively simple assessment of the change in site condition after implementation of drainage, but approaches for further improvement of the procedure were identified. Copyright © 2014 Elsevier Ltd. All rights reserved.

Updating the 2001 National Land Cover Database Impervious Surface Products to 2006 using Landsat imagery change detection methods

USGS Publications Warehouse

Xian, George; Homer, Collin G.

2010-01-01

A prototype method was developed to update the U.S. Geological Survey (USGS) National Land Cover Database (NLCD) 2001 to a nominal date of 2006. NLCD 2001 is widely used as a baseline for national land cover and impervious cover conditions. To enable the updating of this database in an optimal manner, methods are designed to be accomplished by individual Landsat scene. Using conservative change thresholds based on land cover classes, areas of change and no-change were segregated from change vectors calculated from normalized Landsat scenes from 2001 and 2006. By sampling from NLCD 2001 impervious surface in unchanged areas, impervious surface predictions were estimated for changed areas within an urban extent defined by a companion land cover classification. Methods were developed and tested for national application across six study sites containing a variety of urban impervious surface. Results show the vast majority of impervious surface change associated with urban development was captured, with overall RMSE from 6.86 to 13.12% for these areas. Changes of urban development density were also evaluated by characterizing the categories of change by percentile for impervious surface. This prototype method provides a relatively low cost, flexible approach to generate updated impervious surface using NLCD 2001 as the baseline.

Analysis of the physicochemical properties of post-manufacturing waste derived from production of methyl esters from rapeseed oil

NASA Astrophysics Data System (ADS)

Kachel-Jakubowska, Magdalena; Matwijczuk, Arkadiusz; Gagoś, Mariusz

2017-04-01

The technology of transesterification of biodiesel obtained from many agricultural products, which are often referred to as renewable resources, yields substantial amounts of by-products. They exhibit various properties that prompt scientific research into potential application thereof. Various spectroscopic methods, e.g. Fourier transform infrared spectroscopy, are being increasingly used in the research. In this paper, we present the results of Fourier transform infrared spectroscopy spectroscopy analyses of technical glycerine, distilled glycerine, and matter organic non glycerol, i.e. by-products of biodiesel production. To facilitate the spectroscopic analysis, a number of parameters were determined for all the materials, e.g. the calorific value, water content, sulphated ash content, methanol content, acidity, as well as the contents of esters, heavy metals, aldehydes, nitrogen, and phosphorus. The results indicate that the analysed products are characterised by a comparable calorific value in the range from 11.35 to 16.05 MJ kg-1 in the case of matter organic non glycerol and technical glycerine. Observation of changes in the position of selected peaks in the range of 3700-650 cm-1 in the Fourier transform infrared spectroscopy method facilitates determination of the level of degradation of the analysed material. Changes in the wavelength ranges can be used for monitoring the formation of secondary oxidation products containing carbonyl groups.

Quality, functionality, and shelf life of fermented meat and meat products: A review.

PubMed

Kumar, Pavan; Chatli, M K; Verma, Akhilesh K; Mehta, Nitin; Malav, O P; Kumar, Devendra; Sharma, Neelesh

2017-09-02

Fermentation of meat is a traditional preservation method used widely for improving quality and shelf life of fermented meat products. Fermentation of meat causes a number of physical, biochemical, and microbial changes, which eventually impart functional properties, sensory characteristics, and nutritional aspects to these products and inhibit the growth of various pathogenic and spoilage microorganisms. These changes include acidification (carbohydrate catabolism), solubilization and gelation of myofibrillar and sarcoplasmic proteins of muscle, degradation of proteins and lipids, reduction of nitrate into nitrite, formation of nitrosomyoglobin, and dehydration. Dry-fermented sausages are increasingly being used as carrier of probiotics. The production of biogenic amines during fermentation can be controlled by selecting proper starter cultures and other preventive measures such as quality of raw materials, hygienic measures, temperature, etc.

Membrane transporter engineering in industrial biotechnology and whole cell biocatalysis.

PubMed

Kell, Douglas B; Swainston, Neil; Pir, Pınar; Oliver, Stephen G

2015-04-01

Because they mainly do not involve chemical changes, membrane transporters have been a Cinderella subject in the biotechnology of small molecule production, but this is a serious oversight. Influx transporters contribute significantly to the flux towards product, and efflux transporters ensure the accumulation of product in the much greater extracellular space of fermentors. Programmes for improving biotechnological processes might therefore give greater consideration to transporters than may have been commonplace. Strategies for identifying important transporters include expression profiling, genome-wide knockout studies, stress-based selection, and the use of inhibitors. In addition, modern methods of directed evolution and synthetic biology, especially those effecting changes in energy coupling, offer huge opportunities for increasing the flux towards extracellular product formation by transporter engineering. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Climate driven crop planting date in the ACME Land Model (ALM): Impacts on productivity and yield

NASA Astrophysics Data System (ADS)

Drewniak, B.

2017-12-01

Climate is one of the key drivers of crop suitability and productivity in a region. The influence of climate and weather on the growing season determine the amount of time crops spend in each growth phase, which in turn impacts productivity and, more importantly, yields. Planting date can have a strong influence on yields with earlier planting generally resulting in higher yields, a sensitivity that is also present in some crop models. Furthermore, planting date is already changing and may continue, especially if longer growing seasons caused by future climate change drive early (or late) planting decisions. Crop models need an accurate method to predict plant date to allow these models to: 1) capture changes in crop management to adapt to climate change, 2) accurately model the timing of crop phenology, and 3) improve crop simulated influences on carbon, nutrient, energy, and water cycles. Previous studies have used climate as a predictor for planting date. Climate as a plant date predictor has more advantages than fixed plant dates. For example, crop expansion and other changes in land use (e.g., due to changing temperature conditions), can be accommodated without additional model inputs. As such, a new methodology to implement a predictive planting date based on climate inputs is added to the Accelerated Climate Model for Energy (ACME) Land Model (ALM). The model considers two main sources of climate data important for planting: precipitation and temperature. This method expands the current temperature threshold planting trigger and improves the estimated plant date in ALM. Furthermore, the precipitation metric for planting, which synchronizes the crop growing season with the wettest months, allows tropical crops to be introduced to the model. This presentation will demonstrate how the improved model enhances the ability of ALM to capture planting date compared with observations. More importantly, the impact of changing the planting date and introducing tropical crops will be explored. Those impacts include discussions on productivity, yield, and influences on carbon and energy fluxes.

Power Ultrasound to Process Dairy Products

NASA Astrophysics Data System (ADS)

Bermúdez-Aguirre, Daniela; Barbosa-Cánovas, Gustavo V.

Conventional methods of pasteurizing milk involve the use of heat regardless of treatment (batch, high temperature short time - HTST or ultra high temperature - UHT sterilization), and the quality of the milk is affected because of the use of high temperatures. Consequences of thermal treatment are a decrease in nutritional properties through the destruction of vitamins or denaturation of proteins, and sometimes the flavor of milk is undesirably changed. These changes are produced at the same time that the goal of the pasteurization process is achieved, which is to have a microbiological safe product, free of pathogenic bacteria, and to reduce the load of deteriorative microorganisms and enzymes, resulting in a product with a longer storage life.

A Sensor-Based Method for Diagnostics of Machine Tool Linear Axes.

PubMed

Vogl, Gregory W; Weiss, Brian A; Donmez, M Alkan

2015-01-01

A linear axis is a vital subsystem of machine tools, which are vital systems within many manufacturing operations. When installed and operating within a manufacturing facility, a machine tool needs to stay in good condition for parts production. All machine tools degrade during operations, yet knowledge of that degradation is illusive; specifically, accurately detecting degradation of linear axes is a manual and time-consuming process. Thus, manufacturers need automated and efficient methods to diagnose the condition of their machine tool linear axes without disruptions to production. The Prognostics and Health Management for Smart Manufacturing Systems (PHM4SMS) project at the National Institute of Standards and Technology (NIST) developed a sensor-based method to quickly estimate the performance degradation of linear axes. The multi-sensor-based method uses data collected from a 'sensor box' to identify changes in linear and angular errors due to axis degradation; the sensor box contains inclinometers, accelerometers, and rate gyroscopes to capture this data. The sensors are expected to be cost effective with respect to savings in production losses and scrapped parts for a machine tool. Numerical simulations, based on sensor bandwidth and noise specifications, show that changes in straightness and angular errors could be known with acceptable test uncertainty ratios. If a sensor box resides on a machine tool and data is collected periodically, then the degradation of the linear axes can be determined and used for diagnostics and prognostics to help optimize maintenance, production schedules, and ultimately part quality.

Screening and identification of genetic loci involved in producing more/denser inclusion bodies in Escherichia coli

PubMed Central

2013-01-01

Background Many proteins and peptides have been used in therapeutic or industrial applications. They are often produced in microbial production hosts by fermentation. Robust protein production in the hosts and efficient downstream purification are two critical factors that could significantly reduce cost for microbial protein production by fermentation. Producing proteins/peptides as inclusion bodies in the hosts has the potential to achieve both high titers in fermentation and cost-effective downstream purification. Manipulation of the host cells such as overexpression/deletion of certain genes could lead to producing more and/or denser inclusion bodies. However, there are limited screening methods to help to identify beneficial genetic changes rendering more protein production and/or denser inclusion bodies. Results We report development and optimization of a simple density gradient method that can be used for distinguishing and sorting E. coli cells with different buoyant densities. We demonstrate utilization of the method to screen genetic libraries to identify a) expression of glyQS loci on plasmid that increased expression of a peptide of interest as well as the buoyant density of inclusion body producing E. coli cells; and b) deletion of a host gltA gene that increased the buoyant density of the inclusion body produced in the E. coli cells. Conclusion A novel density gradient sorting method was developed to screen genetic libraries. Beneficial host genetic changes could be exploited to improve recombinant protein expression as well as downstream protein purification. PMID:23638724

Screening and identification of genetic loci involved in producing more/denser inclusion bodies in Escherichia coli.

PubMed

Pandey, Neeraj; Sachan, Annapurna; Chen, Qi; Ruebling-Jass, Kristin; Bhalla, Ritu; Panguluri, Kiran Kumar; Rouviere, Pierre E; Cheng, Qiong

2013-05-02

Many proteins and peptides have been used in therapeutic or industrial applications. They are often produced in microbial production hosts by fermentation. Robust protein production in the hosts and efficient downstream purification are two critical factors that could significantly reduce cost for microbial protein production by fermentation. Producing proteins/peptides as inclusion bodies in the hosts has the potential to achieve both high titers in fermentation and cost-effective downstream purification. Manipulation of the host cells such as overexpression/deletion of certain genes could lead to producing more and/or denser inclusion bodies. However, there are limited screening methods to help to identify beneficial genetic changes rendering more protein production and/or denser inclusion bodies. We report development and optimization of a simple density gradient method that can be used for distinguishing and sorting E. coli cells with different buoyant densities. We demonstrate utilization of the method to screen genetic libraries to identify a) expression of glyQS loci on plasmid that increased expression of a peptide of interest as well as the buoyant density of inclusion body producing E. coli cells; and b) deletion of a host gltA gene that increased the buoyant density of the inclusion body produced in the E. coli cells. A novel density gradient sorting method was developed to screen genetic libraries. Beneficial host genetic changes could be exploited to improve recombinant protein expression as well as downstream protein purification.

A Sensor-Based Method for Diagnostics of Machine Tool Linear Axes

PubMed Central

Vogl, Gregory W.; Weiss, Brian A.; Donmez, M. Alkan

2017-01-01

A linear axis is a vital subsystem of machine tools, which are vital systems within many manufacturing operations. When installed and operating within a manufacturing facility, a machine tool needs to stay in good condition for parts production. All machine tools degrade during operations, yet knowledge of that degradation is illusive; specifically, accurately detecting degradation of linear axes is a manual and time-consuming process. Thus, manufacturers need automated and efficient methods to diagnose the condition of their machine tool linear axes without disruptions to production. The Prognostics and Health Management for Smart Manufacturing Systems (PHM4SMS) project at the National Institute of Standards and Technology (NIST) developed a sensor-based method to quickly estimate the performance degradation of linear axes. The multi-sensor-based method uses data collected from a ‘sensor box’ to identify changes in linear and angular errors due to axis degradation; the sensor box contains inclinometers, accelerometers, and rate gyroscopes to capture this data. The sensors are expected to be cost effective with respect to savings in production losses and scrapped parts for a machine tool. Numerical simulations, based on sensor bandwidth and noise specifications, show that changes in straightness and angular errors could be known with acceptable test uncertainty ratios. If a sensor box resides on a machine tool and data is collected periodically, then the degradation of the linear axes can be determined and used for diagnostics and prognostics to help optimize maintenance, production schedules, and ultimately part quality. PMID:28691039

The Wildland/Urban Interface in 2025

Treesearch

Gary O. Tokle

1987-01-01

In the year 2025, wildland fire fighting practices have improved significantly over the method employed during the late1900's. Improved methods for predicting severe fire weather conditions, the establishment of the North American Fire Coordination Center, and the utilization of foam products for both wildfire and structural fire control have significantly changed...

Online air analysis of reduced sulfur compounds at a swine facility

USDA-ARS?s Scientific Manuscript database

Reduced sulfur compounds are emitted from waste management handling and can be important in odor production and atmospheric chemistry. Data on the emissions of these compounds have been obtained using off-line sampling and analysis methods, but on-line methods providing information on temporal chang...

Modelling Benefits-Oriented Costs for Technology Enhanced Learning

ERIC Educational Resources Information Center

Laurillard, Diana

2007-01-01

The introduction of technology enhanced learning (TEL) methods changes the deployment of the most important resource in the education system: teachers' and learners' time. New technology promises greater personalization and greater productivity, but without careful modeling of the effects on the use of staff time, TEL methods can easily increase…

Statistical bias correction method applied on CMIP5 datasets over the Indian region during the summer monsoon season for climate change applications

NASA Astrophysics Data System (ADS)

Prasanna, V.

2018-01-01

This study makes use of temperature and precipitation from CMIP5 climate model output for climate change application studies over the Indian region during the summer monsoon season (JJAS). Bias correction of temperature and precipitation from CMIP5 GCM simulation results with respect to observation is discussed in detail. The non-linear statistical bias correction is a suitable bias correction method for climate change data because it is simple and does not add up artificial uncertainties to the impact assessment of climate change scenarios for climate change application studies (agricultural production changes) in the future. The simple statistical bias correction uses observational constraints on the GCM baseline, and the projected results are scaled with respect to the changing magnitude in future scenarios, varying from one model to the other. Two types of bias correction techniques are shown here: (1) a simple bias correction using a percentile-based quantile-mapping algorithm and (2) a simple but improved bias correction method, a cumulative distribution function (CDF; Weibull distribution function)-based quantile-mapping algorithm. This study shows that the percentile-based quantile mapping method gives results similar to the CDF (Weibull)-based quantile mapping method, and both the methods are comparable. The bias correction is applied on temperature and precipitation variables for present climate and future projected data to make use of it in a simple statistical model to understand the future changes in crop production over the Indian region during the summer monsoon season. In total, 12 CMIP5 models are used for Historical (1901-2005), RCP4.5 (2005-2100), and RCP8.5 (2005-2100) scenarios. The climate index from each CMIP5 model and the observed agricultural yield index over the Indian region are used in a regression model to project the changes in the agricultural yield over India from RCP4.5 and RCP8.5 scenarios. The results revealed a better convergence of model projections in the bias corrected data compared to the uncorrected data. The study can be extended to localized regional domains aimed at understanding the changes in the agricultural productivity in the future with an agro-economy or a simple statistical model. The statistical model indicated that the total food grain yield is going to increase over the Indian region in the future, the increase in the total food grain yield is approximately 50 kg/ ha for the RCP4.5 scenario from 2001 until the end of 2100, and the increase in the total food grain yield is approximately 90 kg/ha for the RCP8.5 scenario from 2001 until the end of 2100. There are many studies using bias correction techniques, but this study applies the bias correction technique to future climate scenario data from CMIP5 models and applied it to crop statistics to find future crop yield changes over the Indian region.

Verification of specific selection SNPs between broiler and layer chicken in Chinese indigenous chicken breeds.

PubMed

Lan, D; Hu, Y D; Zhu, Q; Li, D Y; Liu, Y P

2015-07-28

The direction of production for indigenous chicken breeds is currently unknown and this knowledge, combined with the development of chicken genome-wide association studies, led us to investigate differences in specific loci between broiler and layer chicken using bioinformatic methods. In addition, we analyzed the distribution of these seven identified loci in four Chinese indigenous chicken breeds, Caoke chicken, Jiuyuan chicken, Sichuan mountain chicken, and Tibetan chicken, using DNA direct sequencing methods, and analyzed the data using bioinformatic methods. Based on the results, we suggest that Caoke chicken could be developed for meat production, while Jiuyuan chicken could be developed for egg production. As Sichuan mountain chicken and Tibetan chicken exhibited large polymorphisms, these breeds could be improved by changing their living environment.

Development of parametric material, energy, and emission inventories for wafer fabrication in the semiconductor industry.

PubMed

Murphy, Cynthia F; Kenig, George A; Allen, David T; Laurent, Jean-Philippe; Dyer, David E

2003-12-01

Currently available data suggest that most of the energy and material consumption related to the production of an integrated circuit is due to the wafer fabrication process. The complexity of wafer manufacturing, requiring hundreds of steps that vary from product to product and from facility to facility and which change every few years, has discouraged the development of material, energy, and emission inventory modules for the purpose of insertion into life cycle assessments. To address this difficulty, a flexible, process-based system for estimating material requirements, energy requirements, and emissions in wafer fabrication has been developed. The method accounts for mass and energy use atthe unit operation level. Parametric unit operation modules have been developed that can be used to predict changes in inventory as the result of changes in product design, equipment selection, or process flow. A case study of the application of the modules is given for energy consumption, but a similar methodology can be used for materials, individually or aggregated.

Overcoming Production Disruption When Adopting New Technologies: Application of Macroergonomics and Safety Culture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naca, Christine L.; Rempel, David M.; Imada, Andy S.

Organizations are constantly responding to new technologies that require an appropriate response to remain competitive. Depending on the nature of the technologic changes, incremental changes may be adequate. However, at some point, the technical demands may be disruptive because the organization is unable to respond adequately. In this case study of a biotechnology production facility, rapidly changing customer and technological demands created a crisis manifested in rising employee injuries and production interruptions. The crisis was ultimately addressed through a comprehensive redesign of human-system relationships. Key ingredients included: a management willing to examine the entire production system, a multidisciplinary team coordinatingmore » efforts towards a common goal, engagement of staff at all levels of the organization, and the creation of feedback channels to better guide the actions of supervisors and managers. The methods used in this successful case study, involving a macroergonomics approach, can be applied to any private or public enterprise.« less

Influence of climate change on the flowering of temperate fruit trees

NASA Astrophysics Data System (ADS)

Perez-Lopez, D.; Ruiz-Ramos, M.; Sánchez-Sánchez, E.; Centeno, A.; Prieto-Egido, I.; Lopez-de-la-Franca, N.

2012-04-01

It is well known that winter chilling is necessary for the flowering of temperate trees. The chilling requirement is a criterion for choosing a species or variety at a given location. Also chemistry products can be used for reducing the chilling-hours needs but make our production more expensive. This study first analysed the observed values of chilling hours for some representative agricultural locations in Spain for the last three decades and their projected changes under climate change scenarios. Usually the chilling is measured and calculated as chilling-hours, and different methods have been used to calculate them (e.g. Richarson et al., 1974 among others) according to the species considered. For our objective North Carolina method (Shaltout and Unrath, 1983) was applied for apples, Utah method (Richardson et al. 1974) for peach and grapevine and the approach used by De Melo-Abreu et al. (2004) for olive trees. The influence of climate change in temperate trees was studied by calculating projections of chilling-hours with climate data from Regional Climate Models (RCMs) at high resolution (25 km) from the European Project ENSEMBLES (http://www.ensembles-eu.org/). These projections will allow for analysing the modelled variations of chill-hours between 2nd half of 20C and 1st half of 21C at the study locations.

A method for estimating vulnerability of Douglas-fir growth to climate change in the Northwestern U.S.

Treesearch

J.S. Littell; D.L. Peterson

2005-01-01

Borrowing from landscape ecology, atmospheric science, and integrated assessment, we aim to understand the complex interactions that determine productivity in montane forests and utilize such relationships to forecast montane forest vulnerability under global climate change. Specifically, we identify relationships for precipitation and temperature that govern the...

A methodology for the preliminary scoping of future changes in ecosystem services, with an illustration from the future midwestern landscapes study

EPA Science Inventory

The product is a white paper defining a methodology for the preliminary scoping of future changes in ecosystem services, with an Illustration from the Future Midwestern Landscapes Study. The scoping method develops a hierarchy of relevant societal values, identifies the ecosyste...

Changes in Composition and Phosphorus Profile during Dry Grind Process of Corn into Ethanol and DDGS

USDA-ARS?s Scientific Manuscript database

Demand for alternatives to fossil fuels has resulted in a dramatic increase in ethanol production from corn. Dry grind method has been a major process, resulting in a large volume of dried distiller grains with solubles (DDGS) as a co-product. The process consists of grinding, cooking, liquefactio...

Changes in Speech Production in an Early Deafened Adult with a Cochlear Implant

ERIC Educational Resources Information Center

Wong, Patrick C. M.

2007-01-01

Background and Aims: The current study is a first investigation reporting the speech production characteristics of an early deafened adult cochlear implant user after a course of speech-language treatment. Methods and Procedures: The participant is culturally deaf and received the cochlear implant when she was 43 years old. A 24-week ABCABC…

Comparison between remote sensing and a dynamic vegetation model for estimating terrestrial primary production of Africa.

PubMed

Ardö, Jonas

2015-12-01

Africa is an important part of the global carbon cycle. It is also a continent facing potential problems due to increasing resource demand in combination with climate change-induced changes in resource supply. Quantifying the pools and fluxes constituting the terrestrial African carbon cycle is a challenge, because of uncertainties in meteorological driver data, lack of validation data, and potentially uncertain representation of important processes in major ecosystems. In this paper, terrestrial primary production estimates derived from remote sensing and a dynamic vegetation model are compared and quantified for major African land cover types. Continental gross primary production estimates derived from remote sensing were higher than corresponding estimates derived from a dynamic vegetation model. However, estimates of continental net primary production from remote sensing were lower than corresponding estimates from the dynamic vegetation model. Variation was found among land cover classes, and the largest differences in gross primary production were found in the evergreen broadleaf forest. Average carbon use efficiency (NPP/GPP) was 0.58 for the vegetation model and 0.46 for the remote sensing method. Validation versus in situ data of aboveground net primary production revealed significant positive relationships for both methods. A combination of the remote sensing method with the dynamic vegetation model did not strongly affect this relationship. Observed significant differences in estimated vegetation productivity may have several causes, including model design and temperature sensitivity. Differences in carbon use efficiency reflect underlying model assumptions. Integrating the realistic process representation of dynamic vegetation models with the high resolution observational strength of remote sensing may support realistic estimation of components of the carbon cycle and enhance resource monitoring, providing suitable validation data is available.

FLUXNET to MODIS: Connecting the dots to capture heterogenious biosphere metabolism

NASA Astrophysics Data System (ADS)

Woods, K. D.; Schwalm, C.; Huntzinger, D. N.; Massey, R.; Poulter, B.; Kolb, T.

2015-12-01

Eddy co-variance flux towers provide our most widely distributed network of direct observations for land-atmosphere carbon exchange. Carbon flux sensitivity analysis is a method that uses in situ networks to understand how ecosystems respond to changes in climatic variables. Flux towers concurrently observe key ecosystem metabolic processes (e..g. gross primary productivity) and micrometeorological variation, but only over small footprints. Remotely sensed vegetation indices from MODIS offer continuous observations of the vegetated land surface, but are less direct, as they are based on light use efficiency algorithms, and not on the ground observations. The marriage of these two data products offers an opportunity to validate remotely sensed indices with in situ observations and translate information derived from tower sites to globally gridded products. Here we provide correlations between Enhanced Vegetation Index (EVI), Leaf Area Index (LAI) and MODIS gross primary production with FLUXNET derived estimates of gross primary production, respiration and net ecosystem exchange. We demonstrate remotely sensed vegetation products which have been transformed to gridded estimates of terrestrial biosphere metabolism on a regional-to-global scale. We demonstrate anomalies in gross primary production, respiration, and net ecosystem exchange as predicted by both MODIS-carbon flux sensitivities and meteorological driver-carbon flux sensitivities. We apply these sensitivities to recent extreme climatic events and demonstrate both our ability to capture changes in biosphere metabolism, and differences in the calculation of carbon flux anomalies based on method. The quantification of co-variation in these two methods of observation is important as it informs both how remotely sensed vegetation indices are correlated with on the ground tower observations, and with what certainty we can expand these observations and relationships.

Microbial diversity in sugarcane ethanol production in a Brazilian distillery using a culture-independent method.

PubMed

Costa, Ohana Yonara Assis; Souto, Betulia Morais; Tupinambá, Daiva Domenech; Bergmann, Jessica Carvalho; Kyaw, Cynthia Maria; Kruger, Ricardo Henrique; Barreto, Cristine Chaves; Quirino, Betania Ferraz

2015-01-01

Sugarcane ethanol production occurs in non-sterile conditions, and microbial contamination can decrease productivity. In this study, we assessed the microbial diversity of contaminants of ethanol production in an industrial facility in Brazil. Samples obtained at different stages were analyzed by pyrosequencing-based profiling of bacterial and archaeal 16S rRNA genes and the fungal internal transcribed spacer region. A total of 355 bacterial groups, 22 archaeal groups, and 203 fungal groups were identified, and community changes were related to temperature changes at certain stages. After fermentation, Lactobacillus and unclassified Lactobacillaceae accounted for nearly 100 % of the bacterial sequences. Predominant Fungi groups were "unclassified Fungi," Meyerozyma, and Candida. The predominant Archaea group was unclassified Thaumarchaeota. This is the first work to assess the diversity of Bacteria, and Archaea and Fungi associated with the industrial process of sugarcane-ethanol production using culture-independent techniques.

Climate Change and Food Security: Health Impacts in Developed Countries

PubMed Central

Hooper, Lee; Abdelhamid, Asmaa; Bentham, Graham; Boxall, Alistair B.A.; Draper, Alizon; Fairweather-Tait, Susan; Hulme, Mike; Hunter, Paul R.; Nichols, Gordon; Waldron, Keith W.

2012-01-01

Background: Anthropogenic climate change will affect global food production, with uncertain consequences for human health in developed countries. Objectives: We investigated the potential impact of climate change on food security (nutrition and food safety) and the implications for human health in developed countries. Methods: Expert input and structured literature searches were conducted and synthesized to produce overall assessments of the likely impacts of climate change on global food production and recommendations for future research and policy changes. Results: Increasing food prices may lower the nutritional quality of dietary intakes, exacerbate obesity, and amplify health inequalities. Altered conditions for food production may result in emerging pathogens, new crop and livestock species, and altered use of pesticides and veterinary medicines, and affect the main transfer mechanisms through which contaminants move from the environment into food. All these have implications for food safety and the nutritional content of food. Climate change mitigation may increase consumption of foods whose production reduces greenhouse gas emissions. Impacts may include reduced red meat consumption (with positive effects on saturated fat, but negative impacts on zinc and iron intake) and reduced winter fruit and vegetable consumption. Developed countries have complex structures in place that may be used to adapt to the food safety consequences of climate change, although their effectiveness will vary between countries, and the ability to respond to nutritional challenges is less certain. Conclusions: Climate change will have notable impacts upon nutrition and food safety in developed countries, but further research is necessary to accurately quantify these impacts. Uncertainty about future impacts, coupled with evidence that climate change may lead to more variable food quality, emphasizes the need to maintain and strengthen existing structures and policies to regulate food production, monitor food quality and safety, and respond to nutritional and safety issues that arise. PMID:23124134

Eco-efficiency in extended supply chains: a case study of furniture production.

PubMed

Michelsen, Ottar; Fet, Annik Magerholm; Dahlsrud, Alexander

2006-05-01

This paper presents a methodology about how eco-efficiency in extended supply chains (ESCs) can be understood and measured. The extended supply chain includes all processes in the life cycle of a product and the eco-efficiency is measured as the relative environmental and value performance in one ESC compared to other ESCs. The paper is based on a case study of furniture production in Norway. Nine different environmental performance indicators are identified. These are based on suggestions from the World Business Council for Sustainable Development and additional indicators that are shown to have significant impacts in the life cycle of the products. Value performance is measured as inverse life cycle costs. The eco-efficiency for six different chair models is calculated and the relative values are shown graphically in XY-diagrams. This provides information about the relative performance of the products, which is valuable in green procurement processes. The same method is also used for analysing changes in eco-efficiency when possible alterations in the ESC are introduced. Here, it is shown that a small and realistic change of end-of-life treatment significantly changes the eco-efficiency of a product.

The Future of Pork Production in the World: Towards Sustainable, Welfare-Positive Systems

PubMed Central

McGlone, John J.

2013-01-01

Simple Summary More pork is eaten in the world than any other meat. Making production systems and practices more sustainable will benefit the animals, the planet and people. A system is presented by which production practices are evaluated using a sustainability matrix. The matrix shows why some practices are more common in some countries and regions and the impediments to more sustainable systems. This method can be used to assess the sustainability of production practices in the future where objective, science-based information is presented alongside ethical and economic information to make the most informed decisions. Finally, this paper points to current pork production practices that are more and less sustainable. Abstract Among land animals, more pork is eaten in the world than any other meat. The earth holds about one billion pigs who deliver over 100 mmt of pork to people for consumption. Systems of pork production changed from a forest-based to pasture-based to dirt lots and finally into specially-designed buildings. The world pork industry is variable and complex not just in production methods but in economics and cultural value. A systematic analysis of pork industry sustainability was performed. Sustainable production methods are considered at three levels using three examples in this paper: production system, penning system and for a production practice. A sustainability matrix was provided for each example. In a comparison of indoor vs. outdoor systems, the food safety/zoonoses concerns make current outdoor systems unsustainable. The choice of keeping pregnant sows in group pens or individual crates is complex in that the outcome of a sustainability assessment leads to the conclusion that group penning is more sustainable in the EU and certain USA states, but the individual crate is currently more sustainable in other USA states, Asia and Latin America. A comparison of conventional physical castration with immunological castration shows that the less-common immunological castration method is more sustainable (for a number of reasons). This paper provides a method to assess the sustainability of production systems and practices that take into account the best available science, human perception and culture, animal welfare, the environment, food safety, worker health and safety, and economics (including the cost of production and solving world hunger). This tool can be used in countries and regions where the table values of a sustainability matrix change based on local conditions. The sustainability matrix can be used to assess current systems and predict improved systems of the future. PMID:26487410

Evaluation of productivity in Iranian pharmaceutical companies: A DEA-based Malmquist approach and panel data analysis

PubMed Central

Varmaghani, Mehdi; Meshkini, Amir Hashemi; Farzadfar, Farshad; Yousefi, Mehdi; Yaghoubifard, Saeed; Varahrami, Vida; Darzi, Ehsan Rezaei; Anabi, Majid; Kebriaeezadeh, Abbas; Zekri, Hedieh-Sadat

2015-01-01

Objective: In this study, we aimed to assess comparative productivity of 21 pharmaceutical companies in Iran during 2000–2013. Methods: To evaluate the productivity trend of pharmaceutical companies in Iran, we used data envelopment analysis-based Malmquist index. “Total assets” and “capital stock” as inputs and “net sales” and “net profit” as outputs extracted from Tehran stock exchange, were selected to be included in the analysis. This method provides the possibility for analyzing the performance of each company in term of productivity changes over time. We also used an estimation generalized least square panel data model to identify the factors that might affect productivity of pharmaceutical companies in Iran using EViews 7 and Deep 2.1 software. Findings: The mean total productivity during all years of the study was 0.9829, which indicates the improvement in their overall productivity. The results, over the 13-year period, indicated that the range of productivity changes in pharmaceutical companies, that were included in this study, was between 0.884 and 1.098. Panel data model indicated that age of company could positively (t = 4.765978, P < 0.001) and being located in cities other than Tehran (the capital) could negatively (t = −5.369549, P < 0.001) affect the productivity of pharmaceutical companies. The analysis showed the new policy (brand-generic scheme) and also the type of ownership did not have a significant effect on the productivity of pharmaceutical companies. Conclusion: In this study, pharmaceutical productivity trends were fluctuated that could be due to the sub-optimal attention of policy makers and managers of pharmaceutical companies toward long-term strategic planning, focusing on productivity improvement. PMID:25984541

Impact of climate change on maize potential productivity and the potential productivity gap in southwest China

NASA Astrophysics Data System (ADS)

He, Di; Wang, Jing; Dai, Tong; Feng, Liping; Zhang, Jianping; Pan, Xuebiao; Pan, Zhihua

2014-12-01

The impact of climate change on maize potential productivity and the potential productivity gap in Southwest China (SWC) are investigated in this paper. We analyze the impact of climate change on the photosynthetic, light-temperature, and climatic potential productivity of maize and their gaps in SWC, by using a crop growth dynamics statistical method. During the maize growing season from 1961 to 2010, minimum temperature increased by 0.20°C per decade ( p < 0.01) across SWC. The largest increases in average and minimum temperatures were observed mostly in areas of Yunnan Province. Growing season average sunshine hours decreased by 0.2 h day-1 per decade ( p < 0.01) and total precipitation showed an insignificant decreasing trend across SWC. Photosynthetic potential productivity decreased by 298 kg ha-1 per decade ( p < 0.05). Both light-temperature and climatic potential productivity decreased ( p < 0.05) in the northeast of SWC, whereas they increased ( p < 0.05) in the southwest of SWC. The gap between light-temperature and climatic potential productivity varied from 12 to 2729 kg ha-1, with the high value areas centered in northern and southwestern SWC. Climatic productivity of these areas reached only 10%-24% of the light-temperature potential productivity, suggesting that there is great potential to increase the maize potential yield by improving water management in these areas. In particular, the gap has become larger in the most recent 10 years. Sensitivity analysis shows that the climatic potential productivity of maize is most sensitive to changes in temperature in SWC. The findings of this study are helpful for quantification of irrigation water requirements so as to achieve maximum yield potentials in SWC.

Understanding the causes of changing grassland use and productivity in Inner Mongolia, China

NASA Astrophysics Data System (ADS)

Zhang, Y.; Gao, L.; Qiao, G.; Chen, J.

2012-12-01

Some dramatic changes of grassland use and productivity have been taking place in Inner Mongolia in the past half century. While the changes are apparently driven by both socio-economic factors and climate, their contribution and interaction are largely unknown. We hypothesize that population growth is an important driving force behind the loss and degradation of the grassland, the market forces and institutional factors such as de-collectivization are become more important factors as the economy is moving from planned economy to market economy. This paper assesses the effects of socio-economic, demographic, institutional and climate factors on grassland use and productivity using a panel data set. The panel data compose the years from 1970s to 2000s and all prefectures in Inner Mongolia. A generalized least squares estimation method, allowing individual effects for prefecture level are applied to the examination. The effect of climate change is tested as well and the coupled socio-economic system and the natural system are investigated.

MALDI MS-based Composition Analysis of the Polymerization Reaction of Toluene Diisocyanate (TDI) and Ethylene Glycol (EG).

PubMed

Ahn, Yeong Hee; Lee, Yeon Jung; Kim, Sung Ho

2015-01-01

This study describes an MS-based analysis method for monitoring changes in polymer composition during the polyaddition polymerization reaction of toluene diisocyanate (TDI) and ethylene glycol (EG). The polymerization was monitored as a function of reaction time using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI TOF MS). The resulting series of polymer adducts terminated with various end-functional groups were precisely identified and the relative compositions of those series were estimated. A new MALDI MS data interpretation method was developed, consisting of a peak-resolving algorithm for overlapping peaks in MALDI MS spectra, a retrosynthetic analysis for the generation of reduced unit mass peaks, and a Gaussian fit-based selection of the most prominent polymer series among the reconstructed unit mass peaks. This method of data interpretation avoids errors originating from side reactions due to the presence of trace water in the reaction mixture or MALDI analysis. Quantitative changes in the relative compositions of the resulting polymer products were monitored as a function of reaction time. These results demonstrate that the mass data interpretation method described herein can be a powerful tool for estimating quantitative changes in the compositions of polymer products arising during a polymerization reaction.

A window-DEA based efficiency evaluation of the public hospital sector in Greece during the 5-year economic crisis

PubMed Central

Flokou, Angeliki; Aletras, Vassilis; Niakas, Dimitris

2017-01-01

The main objective of this study was to apply the non-parametric method of Data Envelopment Analysis (DEA) to measure the efficiency of Greek NHS hospitals between 2009–2013. Hospitals were divided into four separate groups with common characteristics which allowed comparisons to be carried out in the context of increased homogeneity. The window-DEA method was chosen since it leads to increased discrimination on the results especially when applied to small samples and it enables year-by-year comparisons of the results. Three inputs -hospital beds, physicians and other health professionals- and three outputs—hospitalized cases, surgeries and outpatient visits- were chosen as production variables in an input-oriented 2-year window DEA model for the assessment of technical and scale efficiency as well as for the identification of returns to scale. The Malmquist productivity index together with its components (i.e. pure technical efficiency change, scale efficiency change and technological scale) were also calculated in order to analyze the sources of productivity change between the first and last year of the study period. In the context of window analysis, the study identified the individual efficiency trends together with “all-windows” best and worst performers and revealed that a high level of technical and scale efficiency was maintained over the entire 5-year period. Similarly, the relevant findings of Malmquist productivity index analysis showed that both scale and pure technical efficiency were improved in 2013 whilst technological change was found to be in favor of the two groups with the largest hospitals. PMID:28542362

An evaluation of dilute acid and ammonia fiber explosion pretreatment for cellulosic ethanol production.

PubMed

Mathew, Anil Kuruvilla; Parameshwaran, Binod; Sukumaran, Rajeev Kumar; Pandey, Ashok

2016-01-01

The challenge associated with cellulosic ethanol production is maximizing sugar yield at low cost. Current research is being focused to develop a pretreatment method to overcome biomass recalcitrance in an efficient way. This review is focused on two major pretreatments: dilute acid (DA) and ammonia fiber explosion (AFEX) pretreatment of corn stover and how these pretreatment cause morphological and chemical changes to corn stover in order to overcome the biomass recalcitrance. This review highlights the key differences of these two pretreatments based on compositional analysis, cellulose and its crystallinity, morphological changes, structural changes to lignin, enzymatic reactivity and enzyme adsorption onto pretreated solids and finally cellulosic ethanol production from the hydrolysate of DA and AFEX treated corn stover. Each stage of the process, AFEX pretreated corn stover was superior to DA treated corn stover. Copyright © 2015 Elsevier Ltd. All rights reserved.

Applicability of Vacuum Impregnation to Modify Physico-Chemical, Sensory and Nutritive Characteristics of Plant Origin Products—A Review

PubMed Central

Radziejewska-Kubzdela, Elżbieta; Biegańska-Marecik, Róża; Kidoń, Marcin

2014-01-01

Vacuum impregnation is a non-destructive method of introducing a solution with a specific composition to the porous matrices of fruit and vegetables. Mass transfer in this process is a result of mechanically induced differences in pressure. Vacuum impregnation makes it possible to fill large volumes of intercellular spaces in tissues of fruit and vegetables, thus modifying physico-chemical properties and sensory attributes of products. This method may be used, e.g., to reduce pH and water activity of the product, change its thermal properties, improve texture, color, taste and aroma. Additionally, bioactive compounds may be introduced together with impregnating solutions, thus improving health-promoting properties of the product or facilitating production of functional food. PMID:25244012

The new production theory for health care through clinical reengineering: a study of clinical guidelines--Part I.

PubMed

Sharp, J R

1994-12-01

Drucker writes that the emerging theory of manufacturing includes four principles and practices: statistical quality control, manufacturing accounting, modular organization, and systems approach. SQC is a rigorous, scientific method of identifying variation in the quality and productivity of a given production process, with an emphasis on improvement. The new manufacturing economics intends to integrate the production strategy with the business strategy in order to account for the biggest portions of costs that the old methods did not assess: time and automation. Production operations that are both standardized and flexible will allow the organization to keep up with changes in design, technology, and the market. The return on innovation in this environment is predicated on a modular arrangement of flexible steps in the process. Finally, the systems approach sees the entire process as being integrated in converting goods or services into economic satisfaction. There is now a major restructuring of the U.S. health care industry, and the incorporation of these four theories into health care reform would appear to be essential. This two-part article will address two problems: Will Drucker's theories relate to health care (Part I)? Will the "new manufacturing" in health care (practice guidelines) demonstrate cost, quality, and access changes that reform demands (Part II)?

The impact of economic crisis on the Greek hospitals' productivity.

PubMed

Mitropoulos, Panagiotis; Mitropoulos, Ioannis; Karanikas, Haralampos; Polyzos, Nikolaos

2018-01-01

During the recent economic crisis, Greece implemented a comprehensive reform in the health care system. The 2010 health reform occurred under the constraints imposed by the memorandum of understanding that the Greek Government signed with its EU/International Monetary Fund creditors to control its deficit. The objective of the study is to examine the impact of the reform on the efficiency and productivity of public hospitals in Greece. We use the Malmquist productivity index to comparatively examine the potential changes before and after the reform years. We compare productivity, efficiency, and technological changes using panel data of 111 public acute hospitals operating in Greece throughout the recession period of 2009 to 2012. Bootstrapping methods are applied to allow for uncertainty owing to sampling error and for statistical inference for the Malmquist productivity index and its decompositions. The analysis indicates that the productivity has been increased following the policy changes. It appears that the expected benefits from the reform in general have been achieved, at least in the short-term. This result is examined in the light of management and operations activities, which are related with the reform process. Therefore, at a second stage, the Malmquist index is regressed on variables that may potentially be statistically associated with productivity growth. Copyright © 2017 John Wiley & Sons, Ltd.

Strategies of bringing drug product marketing applications to meet current regulatory standards.

PubMed

Wu, Yan; Freed, Anita; Lavrich, David; Raghavachari, Ramesh; Huynh-Ba, Kim; Shah, Ketan; Alasandro, Mark

2015-08-01

In the past decade, many guidance documents have been issued through collaboration of global organizations and regulatory authorities. Most of these are applicable to new products, but there is a risk that currently marketed products will not meet the new compliance standards during audits and inspections while companies continue to make changes through the product life cycle for continuous improvement or market demands. This discussion presents different strategies to bringing drug product marketing applications to meet current and emerging standards. It also discusses stability and method designs to meet process validation and global development efforts.

Analysis of quetiapine in human plasma using fluorescence spectroscopy

NASA Astrophysics Data System (ADS)

Mostafa, Islam M.; Omar, Mahmoud A.; Nagy, Dalia M.; Derayea, Sayed M.

2018-05-01

A simple and sensitive spectrofluorimetric method has been development for the assurance of quetiapine fumarate (QTF). The proposed method was utilized for measuring the fluorescence intensity of the yellow fluorescent product at 510 nm (λex 470 nm). The fluorescent product has resulted from the nucleophilic substitution reaction of QTF with 4-chloro-7-nitrobenzofurazane (NBD-Cl) in Mcllvaine buffer (pH 7.0). The diverse variables influencing the development of the reaction product were deliberately changed and optimized. The linear concentration range of the proposed method was of 0.2-2.0 μg ml-1.The limits of detection and quantitation were 0.05 and 0.17 μg ml-1, respectively. The proposed method was applied for the assurance of QTF in its tablets without interference from basic excipients. In addition, the proposed method was used for in vitro analysis of the QTF in spiked human plasma, the percent mean recovery was (n = 3) 98.82 ± 1.484%.

Marketing a managed care plan: achieving product differentiation.

PubMed

Romeo, N C

1996-01-01

The health care marketplace is changing dramatically, even without federal reform measures. This is a volatile, yet promising, time to market a managed care plan. Before marketing the product, it is critical that the competition is thoroughly evaluated and consumer and employer needs are researched. The final product should be distinguishable from the competition and address market needs. Promotion can then begin, utilizing a proactive public relations and advertising campaign in addition to traditional methods of marketing.

Impact of a transposon insertion in phzF2 on the specialized metabolite production and interkingdom interactions of Pseudomonas aeruginosa.

PubMed

Phelan, Vanessa V; Moree, Wilna J; Aguilar, Julieta; Cornett, Dale S; Koumoutsi, Alexandra; Noble, Suzanne M; Pogliano, Kit; Guerrero, Carlos A; Dorrestein, Pieter C

2014-05-01

In microbiology, gene disruption and subsequent experiments often center on phenotypic changes caused by one class of specialized metabolites (quorum sensors, virulence factors, or natural products), disregarding global downstream metabolic effects. With the recent development of mass spectrometry-based methods and technologies for microbial metabolomics investigations, it is now possible to visualize global production of diverse classes of microbial specialized metabolites simultaneously. Using imaging mass spectrometry (IMS) applied to the analysis of microbiology experiments, we can observe the effects of mutations, knockouts, insertions, and complementation on the interactive metabolome. In this study, a combination of IMS and liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used to visualize the impact on specialized metabolite production of a transposon insertion into a Pseudomonas aeruginosa phenazine biosynthetic gene, phzF2. The disruption of phenazine biosynthesis led to broad changes in specialized metabolite production, including loss of pyoverdine production. This shift in specialized metabolite production significantly alters the metabolic outcome of an interaction with Aspergillus fumigatus by influencing triacetylfusarinine production.

Impact of a Transposon Insertion in phzF2 on the Specialized Metabolite Production and Interkingdom Interactions of Pseudomonas aeruginosa

PubMed Central

Phelan, Vanessa V.; Moree, Wilna J.; Aguilar, Julieta; Cornett, Dale S.; Koumoutsi, Alexandra; Noble, Suzanne M.; Pogliano, Kit; Guerrero, Carlos A.

2014-01-01

In microbiology, gene disruption and subsequent experiments often center on phenotypic changes caused by one class of specialized metabolites (quorum sensors, virulence factors, or natural products), disregarding global downstream metabolic effects. With the recent development of mass spectrometry-based methods and technologies for microbial metabolomics investigations, it is now possible to visualize global production of diverse classes of microbial specialized metabolites simultaneously. Using imaging mass spectrometry (IMS) applied to the analysis of microbiology experiments, we can observe the effects of mutations, knockouts, insertions, and complementation on the interactive metabolome. In this study, a combination of IMS and liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used to visualize the impact on specialized metabolite production of a transposon insertion into a Pseudomonas aeruginosa phenazine biosynthetic gene, phzF2. The disruption of phenazine biosynthesis led to broad changes in specialized metabolite production, including loss of pyoverdine production. This shift in specialized metabolite production significantly alters the metabolic outcome of an interaction with Aspergillus fumigatus by influencing triacetylfusarinine production. PMID:24532776

From plant cell wall metabolism and plasticity to cell wall biotechnology.

PubMed

Hamann, Thorsten; Kärkönen, Anna; Krause, Kirsten

2018-06-28

The greenhouse effect is in part caused by the use of fossil fuels for energy production. The effect in turn leads to climate change, which impairs food crop productivity due to increased biotic and abiotic stress. A major aim at the moment is to replace energy production from fossil fuels with more sustainable methods, which amongst others involve plant biomass as a starting material for energy production through fermentation and other applications. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Living microorganisms change the information (Shannon) content of a geophysical system.

PubMed

Tang, Fiona H M; Maggi, Federico

2017-06-12

The detection of microbial colonization in geophysical systems is becoming of interest in various disciplines of Earth and planetary sciences, including microbial ecology, biogeochemistry, geomicrobiology, and astrobiology. Microorganisms are often observed to colonize mineral surfaces, modify the reactivity of minerals either through the attachment of their own biomass or the glueing of mineral particles with their mucilaginous metabolites, and alter both the physical and chemical components of a geophysical system. Here, we hypothesise that microorganisms engineer their habitat, causing a substantial change to the information content embedded in geophysical measures (e.g., particle size and space-filling capacity). After proving this hypothesis, we introduce and test a systematic method that exploits this change in information content to detect microbial colonization in geophysical systems. Effectiveness and robustness of this method are tested using a mineral sediment suspension as a model geophysical system; tests are carried out against 105 experiments conducted with different suspension types (i.e., pure mineral and microbially-colonized) subject to different abiotic conditions, including various nutrient and mineral concentrations, and different background entropy production rates. Results reveal that this method can systematically detect microbial colonization with less than 10% error in geophysical systems with low-entropy background production rate.

7 CFR 718.206 - Determining farms, tracts, allotments, quotas, and bases when reconstitution is made by division.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., ACREAGE ALLOTMENTS, AND PRODUCTION ADJUSTMENT PROVISIONS APPLICABLE TO MULTIPLE PROGRAMS Reconstitution of... available land, cultural operations, and changes in type of farming. (e) The cropland method is the pro-rata... the method used did not provide an equitable distribution considering available land, cultural...

Tracing trade-related telecouplings in the global land-system using the embodied human appropriation of net primary production framework

NASA Astrophysics Data System (ADS)

Haberl, H.; Kastner, T.; Schaffartzik, A.; Erb, K. H.

2015-12-01

Global land-system change is influenced by a complex set of drivers that transcend spatial, institutional and temporal scales. The notion of "telecouplings" is gaining importance in Land System Science as a framework to address that complexity of drivers. One of them is the trade in land-based products, which forges connections between different geographic regions. Trade in land-based products is growing rapidly, thereby creating an increasing spatial disconnect between the locations where primary products (e.g. crops, fodder or timber) are grown and harvested and where the related environmental pressures occur, and the locations where final products (e.g. food, fiber or bioenergy) are consumed. Governing land-related sustainability issues such as GHG emissions or pressures on biodiversity and ecosystems related with land-use changes requires information on trade-related telecouplings, e.g. in order to avoid leakage effects. However, tracing land use (change) related with flows of traded products is challenging, among others due to (a) the lack of easily implementable metrics to account for differences in land quality and land-use intensity, and (b) the lack of satisfactory methods to allocate land to products that are traded and consumed. Drawing from a database derived from FAO statistics that allows tracing bilateral trade flows between ~200 countries at a resolution of ~500 products for the time period 1986-2006, this presentation will discuss how the framework of embodied human appropriation of net primary production (eHANPP) can help tackling these difficult issues. The HANPP framework allows to consistently represent important aspects of land quality and land-use intensity, e.g. natural productivity potential or land-use efficiency. In terms of allocation of land to products, eHANPP is a factor-based approach, and the presentation will discuss differences to alternative methods such as environmentally extended input-output analysis. We will use the available empirical results on eHANPP to demonstrate the growing importance of global telecouplings related to trade and to discuss the usefulness of that information to better manage ecosystems globally in an increasingly interconnected world.

Perestroika and Change in Soviet Weapons Acquisition

DTIC Science & Technology

1990-06-01

attempted to transfer features of defense industry-mainly managers and methods-to the civilian sector to improve productivity and output. On assuming...to the defense complex absorbed defense managers ’ attention, diverted defense production capacity, and redirected new investment to food processing...equipment drew on additional management andproduction caaite and required more diversion of invest- mnet. Defense procurement reductions arising from

Recovery of Online Sentence Processing in Aphasia: Eye Movement Changes Resulting from Treatment of Underlying Forms

ERIC Educational Resources Information Center

Mack, Jennifer E.; Thompson, Cynthia K.

2017-01-01

Purpose: The present study tested whether (and how) language treatment changed online sentence processing in individuals with aphasia. Method: Participants with aphasia (n = 10) received a 12-week program of Treatment of Underlying Forms (Thompson & Shapiro, 2005) focused on production and comprehension of passive sentences. Before and after…

Three dimensional colorimetric assay assemblies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Charych, D.; Reichart, A.

2000-06-27

A direct assay is described using novel three-dimensional polymeric assemblies which change from a blue to red color when exposed to an analyte, in one case a flu virus. The assemblies are typically in the form of liposomes which can be maintained in a suspension, and show great intensity in their color changes. Their method of production is also described.

Three dimensional colorimetric assay assemblies

DOEpatents

Charych, Deborah; Reichart, Anke

2000-01-01

A direct assay is described using novel three-dimensional polymeric assemblies which change from a blue to red color when exposed to an analyte, in one case a flu virus. The assemblies are typically in the form of liposomes which can be maintained in a suspension, and show great intensity in their color changes. Their method of production is also described.

Three-dimensional colorimetric assay assemblies

DOEpatents

Charych, Deborah; Reichert, Anke

2001-01-01

A direct assay is described using novel three-dimensional polymeric assemblies which change from a blue to red color when exposed to an analyte, in one case a flue virus. The assemblies are typically in the form of liposomes which can be maintained in a suspension, and show great intensity in their color changes. Their method of production is also described.

Evaluations of alternative methods for monitoring and estimating responses of salmon productivity in the North Pacific to future climatic change and other processes: A simulation study

EPA Science Inventory

Estimation of the relative influence of climate change, compared to other human activities, on dynamics of Pacific salmon (Oncorhynchus spp.) populations can help management agencies take appropriate management actions. We used empirically based simulation modelling of 48 sockeye...

Constraint-based strain design using continuous modifications (CosMos) of flux bounds finds new strategies for metabolic engineering.

PubMed

Cotten, Cameron; Reed, Jennifer L

2013-05-01

In recent years, a growing number of metabolic engineering strain design techniques have employed constraint-based modeling to determine metabolic and regulatory network changes which are needed to improve chemical production. These methods use systems-level analysis of metabolism to help guide experimental efforts by identifying deletions, additions, downregulations, and upregulations of metabolic genes that will increase biological production of a desired metabolic product. In this work, we propose a new strain design method with continuous modifications (CosMos) that provides strategies for deletions, downregulations, and upregulations of fluxes that will lead to the production of the desired products. The method is conceptually simple and easy to implement, and can provide additional strategies over current approaches. We found that the method was able to find strain design strategies that required fewer modifications and had larger predicted yields than strategies from previous methods in example and genome-scale networks. Using CosMos, we identified modification strategies for producing a variety of metabolic products, compared strategies derived from Escherichia coli and Saccharomyces cerevisiae metabolic models, and examined how imperfect implementation may affect experimental outcomes. This study gives a powerful and flexible technique for strain engineering and examines some of the unexpected outcomes that may arise when strategies are implemented experimentally. Copyright © 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.

Multiple Criteria and Multiple Periods Performance Analysis: The Comparison of North African Railways

NASA Astrophysics Data System (ADS)

Sabri, Karim; Colson, Gérard E.; Mbangala, Augustin M.

2008-10-01

Multi-period differences of technical and financial performances are analysed by comparing five North African railways over the period (1990-2004). A first approach is based on the Malmquist DEA TFP index for measuring the total factors productivity change, decomposed into technical efficiency change and technological changes. A multiple criteria analysis is also performed using the PROMETHEE II method and the software ARGOS. These methods provide complementary detailed information, especially by discriminating the technological and management progresses by Malmquist and the two dimensions of performance by Promethee: that are the service to the community and the enterprises performances, often in conflict.

Japan Report, Science and Technology.

DTIC Science & Technology

1987-04-28

manufacture liquid hydrogen domestically because "a method to manufacture hydrogen by decomposing methanol is in commercial use and if we neglect this area...system or element, and how safety is related to materials, production methods , and sterilization. The environment where the materials are used...be essential to produce them in a clean environment. For instance, the dialyzer-sterilizing method is changing. Initially, it was sold in

Bayesian inversion analysis of nonlinear dynamics in surface heterogeneous reactions.

PubMed

Omori, Toshiaki; Kuwatani, Tatsu; Okamoto, Atsushi; Hukushima, Koji

2016-09-01

It is essential to extract nonlinear dynamics from time-series data as an inverse problem in natural sciences. We propose a Bayesian statistical framework for extracting nonlinear dynamics of surface heterogeneous reactions from sparse and noisy observable data. Surface heterogeneous reactions are chemical reactions with conjugation of multiple phases, and they have the intrinsic nonlinearity of their dynamics caused by the effect of surface-area between different phases. We adapt a belief propagation method and an expectation-maximization (EM) algorithm to partial observation problem, in order to simultaneously estimate the time course of hidden variables and the kinetic parameters underlying dynamics. The proposed belief propagation method is performed by using sequential Monte Carlo algorithm in order to estimate nonlinear dynamical system. Using our proposed method, we show that the rate constants of dissolution and precipitation reactions, which are typical examples of surface heterogeneous reactions, as well as the temporal changes of solid reactants and products, were successfully estimated only from the observable temporal changes in the concentration of the dissolved intermediate product.

Discrete State Change Model of Manufacturing Quality to Aid Assembly Process Design

NASA Astrophysics Data System (ADS)

Koga, Tsuyoshi; Aoyama, Kazuhiro

This paper proposes a representation model of the quality state change in an assembly process that can be used in a computer-aided process design system. In order to formalize the state change of the manufacturing quality in the assembly process, the functions, operations, and quality changes in the assembly process are represented as a network model that can simulate discrete events. This paper also develops a design method for the assembly process. The design method calculates the space of quality state change and outputs a better assembly process (better operations and better sequences) that can be used to obtain the intended quality state of the final product. A computational redesigning algorithm of the assembly process that considers the manufacturing quality is developed. The proposed method can be used to design an improved manufacturing process by simulating the quality state change. A prototype system for planning an assembly process is implemented and applied to the design of an auto-breaker assembly process. The result of the design example indicates that the proposed assembly process planning method outputs a better manufacturing scenario based on the simulation of the quality state change.

Diesel Locomotive Exhaust Emission Control and Abatement

DOT National Transportation Integrated Search

1972-06-01

Exhaust emissions from diesel locomotives are a product of engine design and combustion characteristics. These pollutants, control methods, and emissions reduction through engine maintenance and retrofittable equipment changes are discussed in this r...

Urban land-cover change detection through sub-pixel imperviousness mapping using remotely sensed data

USGS Publications Warehouse

Yang, Limin; Xian, George Z.; Klaver, Jacqueline M.; Deal, Brian

2003-01-01

We developed a Sub-pixel Imperviousness Change Detection (SICD) approach to detect urban land-cover changes using Landsat and high-resolution imagery. The sub-pixel percent imperviousness was mapped for two dates (09 March 1993 and 11 March 2001) over western Georgia using a regression tree algorithm. The accuracy of the predicted imperviousness was reasonable based on a comparison using independent reference data. The average absolute error between predicted and reference data was 16.4 percent for 1993 and 15.3 percent for 2001. The correlation coefficient (r) was 0.73 for 1993 and 0.78 for 2001, respectively. Areas with a significant increase (greater than 20 percent) in impervious surface from 1993 to 2001 were mostly related to known land-cover/land-use changes that occurred in this area, suggesting that the spatial change of an impervious surface is a useful indicator for identifying spatial extent, intensity, and, potentially, type of urban land-cover/land-use changes. Compared to other pixel-based change-detection methods (band differencing, rationing, change vector, post-classification), information on changes in sub-pixel percent imperviousness allow users to quantify and interpret urban land-cover/land-use changes based on their own definition. Such information is considered complementary to products generated using other change-detection methods. In addition, the procedure for mapping imperviousness is objective and repeatable, hence, can be used for monitoring urban land-cover/land-use change over a large geographic area. Potential applications and limitations of the products developed through this study in urban environmental studies are also discussed.

Efficient estimation of the maximum metabolic productivity of batch systems

DOE PAGES

St. John, Peter C.; Crowley, Michael F.; Bomble, Yannick J.

2017-01-31

Production of chemicals from engineered organisms in a batch culture involves an inherent trade-off between productivity, yield, and titer. Existing strategies for strain design typically focus on designing mutations that achieve the highest yield possible while maintaining growth viability. While these methods are computationally tractable, an optimum productivity could be achieved by a dynamic strategy in which the intracellular division of resources is permitted to change with time. New methods for the design and implementation of dynamic microbial processes, both computational and experimental, have therefore been explored to maximize productivity. However, solving for the optimal metabolic behavior under the assumptionmore » that all fluxes in the cell are free to vary is a challenging numerical task. Here, previous studies have therefore typically focused on simpler strategies that are more feasible to implement in practice, such as the time-dependent control of a single flux or control variable.« less

Adapting to the Weather: Lessons from U.S. History.

PubMed

Bleakley, Hoyt; Hong, Sok Chul

2017-09-01

An important unknown in understanding the impact of climate change is the scope of adaptation, which requires observations on historical time scales. We consider how weather across U.S. history (1860-2000) has affected various measures of productivity. Using cross-sectional and panel methods, we document significant responses of agricultural and individual productivity to weather. We find strong effects of hotter and wetter weather early in U.S. history, but these effects have been attenuated in recent decades. The results suggest that estimates from a given period may be of limited use in forecasting the longer-term impacts of climate change.

Mass media health communication campaigns combined with health-related product distribution: a community guide systematic review.

PubMed

Robinson, Maren N; Tansil, Kristin A; Elder, Randy W; Soler, Robin E; Labre, Magdala P; Mercer, Shawna L; Eroglu, Dogan; Baur, Cynthia; Lyon-Daniel, Katherine; Fridinger, Fred; Sokler, Lynn A; Green, Lawrence W; Miller, Therese; Dearing, James W; Evans, William D; Snyder, Leslie B; Kasisomayajula Viswanath, K; Beistle, Diane M; Chervin, Doryn D; Bernhardt, Jay M; Rimer, Barbara K

2014-09-01

Health communication campaigns including mass media and health-related product distribution have been used to reduce mortality and morbidity through behavior change. The intervention is defined as having two core components reflecting two social marketing principles: (1) promoting behavior change through multiple communication channels, one being mass media, and (2) distributing a free or reduced-price product that facilitates adoption and maintenance of healthy behavior change, sustains cessation of harmful behaviors, or protects against behavior-related disease or injury. Using methods previously developed for the Community Guide, a systematic review (search period, January 1980-December 2009) was conducted to evaluate the effectiveness of health communication campaigns that use multiple channels, including mass media, and distribute health-related products. The primary outcome of interest was use of distributed health-related products. Twenty-two studies that met Community Guide quality criteria were analyzed in 2010. Most studies showed favorable behavior change effects on health-related product use (a median increase of 8.4 percentage points). By product category, median increases in desired behaviors ranged from 4.0 percentage points for condom promotion and distribution campaigns to 10.0 percentage points for smoking-cessation campaigns. Health communication campaigns that combine mass media and other communication channels with distribution of free or reduced-price health-related products are effective in improving healthy behaviors. This intervention is expected to be applicable across U.S. demographic groups, with appropriate population targeting. The ability to draw more specific conclusions about other important social marketing practices is constrained by limited reporting of intervention components and characteristics. Published by Elsevier Inc.

Introduction of the levonorgestrel intrauterine system in Kenya through mobile outreach: review of service statistics and provider perspectives.

PubMed

Hubacher, David; Akora, Vitalis; Masaba, Rose; Chen, Mario; Veena, Valentine

2014-02-01

The levonorgestrel intrauterine system (LNG IUS) was developed over 30 years ago, but the product is currently too expensive for widespread use in many developing countries. In Kenya, one organization has received donated commodities for 5 years, providing an opportunity to assess impact and potential future role of the product. We reviewed service statistics on insertions of the LNG IUS, copper intrauterine device (IUD), and subdermal implant from 15 mobile outreach teams during the 2011 calendar year. To determine the impact of the LNG IUS introduction, we analyzed changes in uptake and distribution of the copper IUD and subdermal implant by comparing periods of time when the LNG IUS was available with periods when it was not available. In addition, we interviewed 27 clinicians to assess their views of the product and of its future role. When the LNG IUS was not available, intrauterine contraception accounted for 39% of long-acting method provision. The addition of the LNG IUS created a slight rise in intrauterine contraception uptake (to 44%) at the expense of the subdermal implant, but the change was only marginally significant (P = .08) and was largely attributable to the copper IUD. All interviewed providers felt that the LNG IUS would increase uptake of long-acting methods, and 70% felt that the noncontraceptive benefits of the product are important to clients. The LNG IUS was well-received among providers and family planning clients in this population in Kenya. Although important changes in service statistics were not apparent from this analysis (perhaps due to the small quantity of LNG IUS that was available), provider enthusiasm for the product was high. This finding, above all, suggests that a larger-scale introduction effort would have strong support from providers and thus increase the chances of success. Adding another proven and highly acceptable long-acting contraceptive technology to the method mix could have important reproductive health impact.

Proteomic Profiling of Recombinant Escherichia coli in High-Cell- Density Fermentations for Improved Production of an Antibody Fragment Biopharmaceutical

PubMed Central

Aldor, Ilana S.; Krawitz, Denise C.; Forrest, William; Chen, Christina; Nishihara, Julie C.; Joly, John C.; Champion, Kathleen M.

2005-01-01

By using two-dimensional polyacrylamide gel electrophoresis, a proteomic analysis over time was conducted with high-cell-density, industrial, phosphate-limited Escherichia coli fermentations at the 10-liter scale. During production, a recombinant, humanized antibody fragment was secreted and assembled in a soluble form in the periplasm. E. coli protein changes associated with culture conditions were distinguished from protein changes associated with heterologous protein expression. Protein spots were monitored quantitatively and qualitatively. Differentially expressed proteins were quantitatively assessed by using a t-test method with a 1% false discovery rate as a significance criterion. As determined by this criterion, 81 protein spots changed significantly between 14 and 72 h (final time) of the control fermentations (vector only). Qualitative (on-off) comparisons indicated that 20 more protein spots were present only at 14 or 72 h in the control fermentations. These changes reflected physiological responses to the culture conditions. In control and production fermentations at 72 h, 25 protein spots were significantly differentially expressed. In addition, 19 protein spots were present only in control or production fermentations at this time. The quantitative and qualitative changes were attributable to overexpression of recombinant protein. The physiological changes observed during the fermentations included the up-regulation of phosphate starvation proteins and the down-regulation of ribosomal proteins and nucleotide biosynthesis proteins. Synthesis of the stress protein phage shock protein A (PspA) was strongly correlated with synthesis of a recombinant product. This suggested that manipulation of PspA levels might improve the soluble recombinant protein yield in the periplasm for this bioprocess. Indeed, controlled coexpression of PspA during production led to a moderate, but statistically significant, improvement in the yield. PMID:15811994

Detection of a sudden change of the field time series based on the Lorenz system.

PubMed

Da, ChaoJiu; Li, Fang; Shen, BingLu; Yan, PengCheng; Song, Jian; Ma, DeShan

2017-01-01

We conducted an exploratory study of the detection of a sudden change of the field time series based on the numerical solution of the Lorenz system. First, the time when the Lorenz path jumped between the regions on the left and right of the equilibrium point of the Lorenz system was quantitatively marked and the sudden change time of the Lorenz system was obtained. Second, the numerical solution of the Lorenz system was regarded as a vector; thus, this solution could be considered as a vector time series. We transformed the vector time series into a time series using the vector inner product, considering the geometric and topological features of the Lorenz system path. Third, the sudden change of the resulting time series was detected using the sliding t-test method. Comparing the test results with the quantitatively marked time indicated that the method could detect every sudden change of the Lorenz path, thus the method is effective. Finally, we used the method to detect the sudden change of the pressure field time series and temperature field time series, and obtained good results for both series, which indicates that the method can apply to high-dimension vector time series. Mathematically, there is no essential difference between the field time series and vector time series; thus, we provide a new method for the detection of the sudden change of the field time series.

Quantitative estimation of global patterns of surface ocean biological productivity and its seasonal variation on timescales from centuries to millennia

NASA Astrophysics Data System (ADS)

Loubere, Paul; Fariduddin, Mohammad

1999-03-01

We present a quantitative method, based on the relative abundances of benthic foraminifera in deep-sea sediments, for estimating surface ocean biological productivity over the timescale of centuries to millennia. We calibrate the method using a global data set composed of 207 samples from the Atlantic, Pacific, and Indian Oceans from a water depth range between 2300 and 3600 m. The sample set was developed so that other, potentially significant, environmental variables would be uncorrelated to overlying surface ocean productivity. A regression of assemblages against productivity yielded an r2 = 0.89 demonstrating a strong productivity signal in the faunal data. In addition, we examined assemblage response to annual variability in biological productivity (seasonality). Our data set included a range of seasonalities which we quantified into a seasonality index using the pigment color bands from the coastal zone color scanner (CZCS). The response of benthic foraminiferal assemblage composition to our seasonality index was tested with regression analysis. We obtained a statistically highly significant r2 = 0.75. Further, discriminant function analysis revealed a clear separation among sample groups based on surface ocean productivity and our seasonality index. Finally, we tested the response of benthic foraminiferal assemblages to three different modes of seasonality. We observed a distinct separation of our samples into groups representing low seasonal variability, strong seasonality with a single main productivity event in the year, and strong seasonality with multiple productivity events in the year. Reconstructing surface ocean biological productivity with benthic foraminifera will aid in modeling marine biogeochemical cycles. Also, estimating mode and range of annual seasonality will provide insight to changing oceanic processes, allowing the examination of the mechanisms causing changes in the marine biotic system over time. This article contains supplementary material.

Research developments in methods to reduce the carbon footprint of the food system: a review.

PubMed

Xu, Zhongyue; Sun, Da-Wen; Zeng, Xin-An; Liu, Dan; Pu, Hongbin

2015-01-01

Global warming is a worldwide issue with its evident impact across a wide range of systems and sectors. It is caused by a number of greenhouse gases (GHGs) emissions, in which food system has made up of a large part. Recently, reduction of GHG emissions has become an urgent issue to be resolved in the food system. Many governments and organizations are making great endeavors to alleviate the adverse effect of this phenomenon. In this review, methods to reduce the carbon footprint within the life cycle of a food system are presented from the technical, consumption behavior and environmental policies perspectives. The whole food system including raw material acquisition, processing, packaging, preservation, transportation, consumption, and disposal are covered. Improving management techniques, and adopting advanced technology and equipment are critical for every stage of a food system. Rational site selection is important to alleviate the influence of land use change. In addition, environmental choices of packaging stage, reduction in refrigeration dependence, and correct waste treatment are essential to reduce the total carbon footprint of the production. However, only technical methods cannot radically reverse the trend of climate change, as consumption behaviors present a great deal of influence over climate change. Appropriate purchase patterns and substitution within food product categories by low carbon products can reduce GHG emissions. Development of methods to calculate the carbon footprint of every kind of food and its processing technology enable people to make environmental choice. Policy can shape and cultivate the new code of consumption and influence the direction of emerging technology and science. From political perspectives, government intervention and carbon offset are common tools, especially for carbon tax and a real or implicit price of carbon. Finally, by mitigating the methodologies described above, the rate and magnitude of climate changes can be also reduced to some extent.

Inventory Management for Irregular Shipment of Goods in Distribution Centre

NASA Astrophysics Data System (ADS)

Takeda, Hitoshi; Kitaoka, Masatoshi; Usuki, Jun

2016-01-01

The shipping amount of commodity goods (Foods, confectionery, dairy products, such as public cosmetic pharmaceutical products) changes irregularly at the distribution center dealing with the general consumer goods. Because the shipment time and the amount of the shipment are irregular, the demand forecast becomes very difficult. For this, the inventory control becomes difficult, too. It cannot be applied to the shipment of the commodity by the conventional inventory control methods. This paper proposes the method for inventory control by cumulative flow curve method. It proposed the method of deciding the order quantity of the inventory control by the cumulative flow curve. Here, it proposes three methods. 1) Power method,2) Polynomial method and 3)Revised Holt's linear method that forecasts data with trends that is a kind of exponential smoothing method. This paper compares the economics of the conventional method, which is managed by the experienced and three new proposed methods. And, the effectiveness of the proposal method is verified from the numerical calculations.

Dendrophenology: Inferring the response of North American eastern deciduous forests to an earlier spring from tree rings

NASA Astrophysics Data System (ADS)

Elmore, A. J.; Nelson, D. M.; Craine, J. M.

2016-12-01

There is wide agreement that anthropogenic climate warming has influenced the phenology of forests during the late twentieth and early twenty-first centuries. A critical question for predicting the magnitude of future warming under different emissions scenarios is the degree to which forest productivity responds to longer growing seasons in the face of concurrent changes in other drivers of productivity. Longer growing seasons can lead to increased photosynthesis and productivity, which would represent a negative feedback to rising CO2 and consequently warming. Alternatively, increased demand for soil resources due to a longer photosynthetically active period in conjunction with other global change factors might exacerbate resource limitation, restricting forest productivity response to a longer growing season. In this case, increased spring-time productivity has the potential to increase plant N limitation by increasing plant demand for N more than N supplies, or increasing early-season ecosystem N losses. Long-term direct measurements are not yet available to specifically address this question, but advances in remote sensing and dendroecological methods present opportunities to acquire information retrospectively to advance understanding of how phenological changes and resource availability to trees have been affecting forest productivity. Here we show that for 222 trees representing three species in eastern North America over the past 30 years earlier spring phenology has caused declines in N availability to trees by increasing demand for N relative to supply. The observed decline in N availability is not associated with reduced wood production, suggesting that other environmental changes such as increased atmospheric CO2 and water availability have likely overwhelmed reduced N availability. Given current trajectories of environmental changes, N limitation will likely continue to increase for these forests, possibly further limiting C sequestration potential.

Evaluation of the recently reported USP gradient HPLC method for analysis of anti-tuberculosis drugs for its ability to resolve degradation products of rifampicin.

PubMed

Mohan, Bhavika; Sharda, Nishi; Singh, Saranjit

2003-03-10

The recently notified USP gradient HPLC method for quantitative determination of rifampicin, isoniazid and pyrazinamide in fixed dose combination (FDC) formulations was evaluated to determine its ability to resolve major degradation products of rifampicin, viz. 3-formylrifamycin SV, rifampicin N-oxide, 25-desacetyl rifampicin, rifampicin quinone, and the newly reported isonicotinyl hydrazone, an interaction product of 3-formylrifamycin and isoniazid. The first observation was that the requirements of theoretical plates listed in the given method were met for rifampicin, but not for isoniazid and pyrazinamide, even on columns of different makes. The resolving power of the method was also dependent upon make of the column. On two of the three columns of the three tested, it was able to resolve most degradation products, except rifampicin N-oxide and 25-desacetylrifampicin, which were overlapping. The method was modified and an overall satisfactory resolution for all components was obtained by changing the buffer: organic modifier ratio of solution B in the gradient from 45:55 to 55:45 and decreasing the flow rate from 1.5 to 1.0 ml/min, keeping all other conditions constant.

Impact of food processing on rye product properties and their in vitro digestion.

PubMed

Johansson, Daniel P; Gutiérrez, José L Vázquez; Landberg, Rikard; Alminger, Marie; Langton, Maud

2018-06-01

Rye products have been reported to elicit postprandial insulin and glucose responses which may be beneficial for prevention of type-2 diabetes. However, mechanisms underlying variations in responses related to processing techniques are not fully understood. Five differently processed rye products (sourdough-fermented bread, fermented and unfermented crispbread, extrusion-cooked rye, and porridge) and refined wheat bread were characterised. Two in vitro methods, a dynamic method simulating digestion in the stomach and small intestine and a static method, simulating conditions in the stomach were used to determine viscosity development, structural changes and release of glucose during digestion. Structural and compositional differences induced by processing influenced product digestion. Gastric disintegration and digesta particle size were related to characteristics of the starch/protein matrix, while digesta viscosity was reduced due to fibre degradation during fermentation. More cohesive boluses were associated with slower glucose release. Sourdough fermentation increased amylose leakage and appeared to inhibit starch hydrolysis despite low digesta viscosity and rapid disintegration. The net release of glucose during digestion of foods is determined by several factors which may vary in their importance depending on product specific properties.

A Study on Real-Time Scheduling Methods in Holonic Manufacturing Systems

NASA Astrophysics Data System (ADS)

Iwamura, Koji; Taimizu, Yoshitaka; Sugimura, Nobuhiro

Recently, new architectures of manufacturing systems have been proposed to realize flexible control structures of the manufacturing systems, which can cope with the dynamic changes in the volume and the variety of the products and also the unforeseen disruptions, such as failures of manufacturing resources and interruptions by high priority jobs. They are so called as the autonomous distributed manufacturing system, the biological manufacturing system and the holonic manufacturing system. Rule-based scheduling methods were proposed and applied to the real-time production scheduling problems of the HMS (Holonic Manufacturing System) in the previous report. However, there are still remaining problems from the viewpoint of the optimization of the whole production schedules. New procedures are proposed, in the present paper, to select the production schedules, aimed at generating effective production schedules in real-time. The proposed methods enable the individual holons to select suitable machining operations to be carried out in the next time period. Coordination process among the holons is also proposed to carry out the coordination based on the effectiveness values of the individual holons.

Multidisciplinary design optimisation of a recurve bow based on applications of the autogenetic design theory and distributed computing

NASA Astrophysics Data System (ADS)

Fritzsche, Matthias; Kittel, Konstantin; Blankenburg, Alexander; Vajna, Sándor

2012-08-01

The focus of this paper is to present a method of multidisciplinary design optimisation based on the autogenetic design theory (ADT) that provides methods, which are partially implemented in the optimisation software described here. The main thesis of the ADT is that biological evolution and the process of developing products are mainly similar, i.e. procedures from biological evolution can be transferred into product development. In order to fulfil requirements and boundary conditions of any kind (that may change at any time), both biological evolution and product development look for appropriate solution possibilities in a certain area, and try to optimise those that are actually promising by varying parameters and combinations of these solutions. As the time necessary for multidisciplinary design optimisations is a critical aspect in product development, ways to distribute the optimisation process with the effective use of unused calculating capacity, can reduce the optimisation time drastically. Finally, a practical example shows how ADT methods and distributed optimising are applied to improve a product.

Soil Oxidation-Reduction in Wetlands and Its Impact on Plant Functioning

PubMed Central

Pezeshki, S. R.; DeLaune, R. D.

2012-01-01

Soil flooding in wetlands is accompanied by changes in soil physical and chemical characteristics. These changes include the lowering of soil redox potential (Eh) leading to increasing demand for oxygen within the soil profile as well as production of soil phytotoxins that are by-products of soil reduction and thus, imposing potentially severe stress on plant roots. Various methods are utilized for quantifying plant responses to reducing soil conditions that include measurement of radial oxygen transport, plant enzymatic responses, and assessment of anatomical/morphological changes. However, the chemical properties and reducing nature of soil environment in which plant roots are grown, including oxygen demand, and other associated processes that occur in wetland soils, pose a challenge to evaluation and comparison of plant responses that are reported in the literature. This review emphasizes soil-plant interactions in wetlands, drawing attention to the importance of quantifying the intensity and capacity of soil reduction for proper evaluation of wetland plant responses, particularly at the process and whole-plant levels. Furthermore, while root oxygen-deficiency may partially account for plant stress responses, the importance of soil phytotoxins, produced as by-products of low soil Eh conditions, is discussed and the need for development of methods to allow differentiation of plant responses to reduced or anaerobic soil conditions vs. soil phytotoxins is emphasized. PMID:24832223

Seeking perfection in healthcare. A case study in adopting Toyota Production System methods.

PubMed

Kaplan, Gary S; Patterson, Sarah H

2008-01-01

Virginia Mason Health System's vision to be the quality leader in healthcare means continually adopting new ways of thinking. One change has been shifting from believing defects are to be expected to believing zero defects in healthcare is not only possible, but also necessary. Generally, healthcare has advanced in technology and understanding of disease, but its business and management systems have changed little since the 1950s. Virginia Mason realized it needed a management method to help make real and measurable improvements in safety, quality, service and staff satisfaction.

Producing a Brighter Future by Changing a Trend

NASA Astrophysics Data System (ADS)

Gwinn, Elaine

2006-12-01

As production of physics teachers declines across the nation, efforts are being employed at Ball Statue University to change that trend. BSU has been a PhysTEC coalition member since the Fall of 2001 and continues to be a Principal Project Institution for the project. This presentation will show various methods that have shown success toward the goal of the recruitment of more and better prepared science teachers. This will be an overview of the entire project, showing the current methods being utilized as well as the successful techniques used in the past.

Relating Satellite Gravimetry Data To Global Snow Water Equivalent Data

NASA Astrophysics Data System (ADS)

Baumann, Sabine

2017-04-01

In 04/2002, the gravimetric satellites GRACE were launched. They measure Earth's gravity via a precise microwave system. These satellites assess changes of Earth's mass. Main contributions of these changes originate from hydrological compartments as e.g. surface water, groundwater, soil moisture, or snow water equivalent (SWE). The benefit of GRACE data is to receive a direct measured signal. The data are not calibrated with other data (as e.g. done in models) or unusable due to particular Earth's surface conditions (e.g. AMSR-e for thick and wet snow surfaces). GRACE data show changes in total water storage (TWS) but cannot distinguish between different sources. Therefore, other data, models, and methods are necessary to extract the different compartments. Due to the spatial resolution of 200,000 km2 and an accuracy of 2.5 cm w.e., mostly other global products are compared with GRACE. In this study, the hydrological model WGHM (TWS and SWE), the land surface model GLDAS (TWS and SWE), and the passive microwave sensor AMSR-E (SWE) are compared with the GRACE data. All data have to be pre-processed in the same way as the GRACE data to be comparable. A correlation analysis was performed between the different products assuming that changes in TWS can be linked to changes in SWE if either SWE is the dominant compartment of TWS or if SWE changes proportionally with TWS. To focus on the SWE product a second correlation was performed only for the winter season. Spatial extent was focused on the large permafrost areas in North America and Russia. By this method, those areas were detected in which GRACE data can be integrated for SWE data assessment to, for example, improve the models.

Detection of early changes in lung cell cytology by flow-systems analysis techniques. Progress report, January 1--December 31, 1978. [Resulting from exposure to toxic agents associated with production and use of synthetic fuels from oil shale and coal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steinkamp, J.A.; Wilson, J.S.; Svitra, Z.V.

1979-02-01

This report summarizes ongoing experiments to develop cytological and biochemical indicators for measuring damage to respiratory tract cells of experimental animals exposed by inhalation to environmental toxic agents. The specific goal is to apply flow cytometric methods to analyze and detect changes in lung epithelium as a function of exposure to toxic agents associated with the production and utilization of synthetic fuels from oil shale and coal. During the past 6 months, hamsters were exposed to raw and spent oil shale particulates, silica dust, and ozone, and DNA content measurements were performed on lung cell samples. Although initial shale exposuresmore » did not yield the expected results, recent data show atypical changes in DNA content per cell distributions. Ozone exposures also were expanded to include DNA measurements and cytology, ranging up to 72 h postexposure. Progress was achieved in developing a new method for quantitating pulmonary macrophage phagocytosis in rats using micron-sized fluorescent spheres. New methods for determining alkaline phosphatase, DNA content, and protein also were under development. Plans are to continue developing cytological and biochemical markers for measuring atypical cellular changes, including macrophage function, and to emphasize exposing experimental animals to particulates and gaseous agents for studying dose-damage relationships.« less

Global Characterization and Monitoring of Forest Cover Using Landsat Data: Opportunities and Challenges

NASA Technical Reports Server (NTRS)

Townshend, John R.; Masek, Jeffrey G.; Huang, ChengQuan; Vermote, Eric F.; Gao, Feng; Channan, Saurabh; Sexton, Joseph O.; Feng, Min; Narasimhan, Ramghuram; Kim, Dohyung;

On the Parity of Structural Persistence in Language Production and Comprehension

PubMed Central

Tooley, Kristen M.; Bock, Kathryn

2014-01-01

Structural priming creates structural persistence. That is, differences in experience with syntax can change subsequent language performance, and the changes can be observed in both language production and comprehension. However, the effects in comprehension and production appear to differ. In comprehension, persistence is typically found when the verbs are the same in primes and targets; in production, persistence occurs without verb overlap. The contrast suggests a theoretically important hypothesis: parsing in comprehension is lexically driven while formulation in production is structurally driven. A major weakness in this hypothesis about comprehension-production differences is that its empirical motivation rests on the outcomes of experiments in which the priming manipulations differ, the primed sentence structures differ, and the measures of priming differ. To sharpen the comparison, we examined structural persistence with and without verb overlap in both reading comprehension and spoken production, using the same prime presentation procedure, the same syntactic structures, the same sentences, and the same participants. These methods yielded abstract sructural persistence in comprehension as well as production. A measure of the strength of persistence revealed significant effects of priming and verb overlap without significant comprehension—production differences. This argues for uniformity in the structural mechanisms of language processing. PMID:24803423

Sensory and analytical characterization of the “cool‐melting” perception of commercial spreads

PubMed Central

Valenҁa de Sousa, Joana; Knoop, Marcia

2017-01-01

Abstract Butters, margarines and table spreads are water‐in‐oil emulsions. Melting characteristics of these products are important for flavor release and consumer acceptance. One characteristic that is believed to discriminate butters from margarines is a cooling sensation perceived in‐mouth while consuming these products. Here, we investigated different methods to characterize sensorically and analytically the “cool‐melting” properties of commercial butter and margarines. Our results show that butter indeed can be distinguished from margarines based on their “cool‐melting” properties. Furthermore, changes in enthalpy as measured through DSC and solid fat content are good predictors of the “cool‐melting” effect of spreads. Practical applications By understanding the mechanisms of the “cool‐melting” perception of spreads, and linking them to analytical measurements, we can create an in‐vitro quantification method of “cool‐melting.” This method can eventually help directing product development to achieve the desire product profile and increase consumer acceptance and liking of margarines and low‐fat spread products. In this study we did not assess the impact of “cool‐melting” on consumer perception, which would be the next step in understanding the drivers of liking of spread products. PMID:28766749

Methods for Attributing Land-Use Emissions to Products

NASA Astrophysics Data System (ADS)

Davis, S. J.; Burney, J. A.; Pongratz, J.; Caldeira, K.

2014-12-01

Roughly one-third of anthropogenic GHG emissions are caused by agricultural and forestry activities and land-use change (collectively, 'land-use emissions'). Understanding the ultimate drivers of these emissions requires attributing emissions to specific land-use activities and products. Although quantities of land-use emissions are matters of fact, the methodological choices and assumptions required to attribute those emissions to activities and products depend on research goals and data availability. We will demonstrate several possible accounting methods, highlighting the sensitivity of accounting to temporal distributions of emissions and the consequences of replacing spatially-explicit data with aggregate proxies such as production or harvested area data. Different accounting options emphasize different causes of land-use emissions (e.g., proximate or indirect drivers of deforestation). To support public policies that effectively balance competing objectives, analysts should carefully consider and communicate implications of accounting choices.

An Alternative Default Soil Organic Carbon Method for National GHG Inventory Reporting to the UNFCCC

NASA Astrophysics Data System (ADS)

Ogle, S. M.; Gurung, R.; Klepfer, A.; Spencer, S.; Breidt, J.

2016-12-01

Estimating soil organic C stocks is challenging because of the large amount of data needed to evaluate the impact of land use and management on this terrestrial C pool. Moreover, some of the required data are rarely collected by governments through surveys programs, and are not typically available in remote sensing products. Examples include data on organic amendments, cover crops, crop rotation sequences, vegetated fallows, and fertilization practices. Due to these difficulties, only about 20% of the countries report soil organic C stock changes in their national communications to the UNFCCC. Yet, C sequestration in soils represents one of the least expensive options for reducing greenhouse gas emissions, and has the largest potential for mitigation in the agricultural sector. In order to facilitate reporting, we developed an alternative approach to the current default method provided by the Intergovernmental Panel on Climate Change (IPCC) for estimating soil organic C stock changes in mineral soils. The alternative method estimates the steady-state C stocks for a three pool model given annual crop yields or net primary production as the main input, along with monthly average temperature, total precipitation and soil texture data. Yield data are commonly available in a national agricultural census, and global datasets exists with adequate data for weather and soil texture if national datasets are not available. Tillage and irrigation data are also needed to address the impact of these practices on decomposition rates. The change in steady-state stocks is assumed to occur over a few decades. A Bayesian analysis framework has been developed to derive probability distribution functions for the parameters, and the method is being applied in a global analysis of soil organic carbon stock changes.

A method for CRISPR/Cas9 mutation of genes in fathead minnow

EPA Science Inventory

Product Description: CRISPR/Cas9 is a system that can be used to disrupt a gene of interest in any animal. It allows us to study each gene’s role by observing changes in the animal when the gene isn’t functional. We worked out a method to use this technology in the f...

Effect of processing method on surface and weathering characteristics of wood-flour/HDPE composites

Treesearch

Nicole M. Stark; Laurent M. Matuana; Craig M. Clemons

2004-01-01

Wood-plastic lumber is promoted as a low maintenance high-durability product. When exposed to accelerated weathering, however, wood-plastic composites may experience a color change and/or loss in mechanical properties. Different methods of manufacturing wood-plastic composites lead to different surface characteristics, which can influence weathering, In this study, 50...

Effect of processing method on accelerated weathering of wood-flour/HDPE composites

Treesearch

Nicole M. Stark; Laurent M. Matuana; Craig M. Clemons

2003-01-01

Wood-plastic lumber is promoted as a low maintenance high-durability product. When exposed to accelerated weathering, however, wood-plastic composites may experience a color change and/or loss in mechanical properties. Different methods of manufacturing wood-plastic composites lead to different surface characteristics, which can influence weathering, In this study, 50...

Behavioral Self-Monitoring of Safety and Productivity in the Workplace: A Methodological Primer and Quantitative Literature Review

ERIC Educational Resources Information Center

Olson, Ryan; Winchester, Jamey

2008-01-01

Workplace applications of behavioral self-monitoring (BSM) methods have been studied periodically for over 35 years, yet the literature has never been systematically reviewed. Recent occupational safety interventions including BSM resulted in relatively large behavior changes. Moreover, BSM methods are functional for addressing a broad range of…

26 CFR 1.263A-7 - Changing a method of accounting under section 263A.

Code of Federal Regulations, 2010 CFR

2010-04-01

... extrapolation, rather than based on the facts and circumstances of a particular year's data. All three methods... analyze the production and resale data for that particular year and apply the rules and principles of... books and records, actual financial and accounting data which is required to apply the capitalization...

26 CFR 1.263A-7 - Changing a method of accounting under section 263A.

Code of Federal Regulations, 2011 CFR

2011-04-01

... extrapolation, rather than based on the facts and circumstances of a particular year's data. All three methods... analyze the production and resale data for that particular year and apply the rules and principles of... books and records, actual financial and accounting data which is required to apply the capitalization...

Automotive manufacturing assessment system. Volume IV: engine manufacturing analysis. Final report Jun 77-Aug 78

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, T. Jr

Volume IV represents the results of one of four major study areas under the Automotive Manufacturing Assessment System (AMAS) sponsored by the DOT/Transportation Systems Center. AMAS was designed to assist in the evaluation of industry's capability to produce fuel efficient vehicles. An analysis of automotive engine manufacturing was conducted in order to determine the impact of regulatory changes on tooling costs and the production process. The 351W CID V-8 engine at Ford's Windsor No. 1 Plant was the subject of the analysis. A review of plant history and its product is presented along with an analysis of manufacturing operations, includingmore » material and production flow, plant layout, machining and assembly processes, tooling, supporting facilities, inspection, service and repair. Four levels of product change intensity showing the impact on manufacturing methods and cost is also presented.« less

Parasitic helminths of the pig: factors influencing transmission and infection levels.

PubMed

Nansen, P; Roepstorff, A

1999-06-01

The occurrence of parasitic helminth species as well as infection intensities are markedly influenced by the type of swine production system used. The present review focusses mainly on the situation in temperate climate regions. Generally, over the past decades there has been a decrease in the number of worm species and worm loads in domestic pigs due to a gradual change from traditional to modern, intensive production systems. The reasons for some species being apparently more influenced by management changes than others are differences in the basic biological requirements of the pre-infective developmental stages, together with differences in transmission characteristics and immunogenicity of the different worm species. Control methods relevant for the different production systems are discussed. Outdoor rearing and organic pig production may in the future be confronted with serious problems because of particularly favourable conditions for helminth transmission. In addition, in organic farms preventive usage of anthelmintics is not permitted.

Changes in Acoustic Characteristics of the Voice across the Life Span: Measures from Individuals 4-93 Years of Age

ERIC Educational Resources Information Center

Stathopoulos, Elaine T.; Huber, Jessica E.; Sussman, Joan E.

2011-01-01

Purpose: The purpose of the present investigation was to examine acoustic voice changes across the life span. Previous voice production investigations used small numbers of participants, had limited age ranges, and produced contradictory results. Method: Voice recordings were made from 192 male and female participants 4-93 years of age. Acoustic…

A Multi-Dimensional Approach to Gradient Change in Phonological Acquisition: A Case Study of Disordered Speech Development

ERIC Educational Resources Information Center

Glaspey, Amy M.; MacLeod, Andrea A. N.

2010-01-01

The purpose of the current study is to document phonological change from a multidimensional perspective for a 3-year-old boy with phonological disorder by comparing three measures: (1) accuracy of consonant productions, (2) dynamic assessment, and (3) acoustic analysis. The methods included collecting a sample of the targets /s, [image omitted],…

Managed forest carbon estimates for the US greenhouse gas inventory, 1990-2008

Treesearch

Linda S. Heath; James E. Smith; Kenneth E. Skog; David J. Nowak; Christopher W. Woodall

2011-01-01

Land-use change and forestry is the major category featuring carbon sequestration in the annual US Greenhouse Gas Inventory, required by the United Nations Framework Convention on Climate Change. We describe the National Greenhouse Gas Inventory and present the sources of our data and methods and the most recent results. Forests and forest products in the United States...

Effects of Short- and Long-Term Changes in Auditory Feedback on Vowel and Sibilant Contrasts

ERIC Educational Resources Information Center

Lane, Harlan; Matthies, Melanie L.; Guenther, Frank H.; Denny, Margaret; Perkell, Joseph S.; Stockmann, Ellen; Tiede, Mark; Vick, Jennell; Zandipour, Majid

2007-01-01

Purpose: To assess the effects of short- and long-term changes in auditory feedback on vowel and sibilant contrasts and to evaluate hypotheses arising from a model of speech motor planning. Method: The perception and production of vowel and sibilant contrasts were measured in 8 postlingually deafened adults prior to activation of their cochlear…

The Effect of Stress and Speech Rate on Vowel Coarticulation in Catalan Vowel-Consonant-Vowel Sequences

ERIC Educational Resources Information Center

Recasens, Daniel

2015-01-01

Purpose: The goal of this study was to ascertain the effect of changes in stress and speech rate on vowel coarticulation in vowel-consonant-vowel sequences. Method: Data on second formant coarticulatory effects as a function of changing /i/ versus /a/ were collected for five Catalan speakers' productions of vowel-consonant-vowel sequences with the…

Methods and consequences of including feed intake and efficiency in genetic selection for multiple-trait merit.

PubMed

Barwick, Stephen A; Henzell, Anthony L; Walmsley, Brad J; Johnston, David J; Banks, Robert G

2018-05-04

Methods are presented for including feed intake and efficiency in genetic selection for multiple-trait merit when commercial production is from any combination of pasture or concentrates. Consequences for the production system and for individual animals are illustrated with a beef cattle example. Residual feed intake at pasture (RFI-p), residual feed intake in the feedlot (RFI-f), and cow condition score are additional traits of the breeding objective. Feed requirement change is costed in the economic values of other objective traits. Selection responses are examined when feed costs are ignored, partially or fully included in the breeding objective, and when net feed intake (NFI) EBVs are added to the index. When all feed cost was included and NFI EBVs were in the index, selection (with selection intensity, i = 1) increased production system $ net return by 6.0%, $ per unit of product by 5.2%, $ per unit of feed by 6.6%, total product by 0.7% and product per unit of feed by 1.3%. There was little change in production system total feed. When feed cost was ignored, selection decreased production system $ net return, $ per unit of product, and $ per unit of feed. At the individual trait level, when feed was fully included there were increases in weaning weight-direct (0.8 kg), feedlot entry weight (1.4 kg), dressing % (0.04%), carcass meat % (0.36%), carcase fat depth (0.12 mm), carcass marbling score (0.02 score), cow condition score (0.01 score), calving ease-direct (0.97%), calving ease-maternal (0.22%) and cow weaning rate (1.3%), and decreases in weaning weight-maternal (-0.9 kg), RFI-p (-0.09 kg DM/d), RFI-f (-0.11 kg DM/d), sale weight (-1.6 kg) and cow weight (-8.7 kg). Gains were evident over a range of feed price. Selection for $ net return also increased $ net return per unit of feed, suggesting that $ net return per unit area would increase in grazing industries. Feed cost for trait change was the source of a major genotype × environment interaction affecting animal rankings. Where industry production environments vary, and feed cost for trait change varies with the environment, we recommend that industry indexes be derived for more than one level of feed cost. Cow condition score did not decline while biological and economic efficiency of the production system and individual animal were improving, suggesting that efficiency can be improved under multiple-trait selection without compromising breeding cow welfare.

Analysis of intracellular cytokines using flowcytometry.

PubMed

Arora, Sunil K

2002-01-01

Characterization of T-cell clones and identification of functional subsets of the helper T-cells with polarized cytokine production is based on testing of cytokine expression. Several methods have been developed that allow cytokine expression to be measured like ELISA, RT-PCR, ELISPOT, ISH and flowcytometry. Among all these methods, monitoring of cytokine production using flowcytometric analysis has its own advantages and disadvantages. Multi-parametric characterization of cytokine production on single cell basis, without long-term culture and cloning along with high throughput of samples is main feature attached to flowcytometric analysis. The interpretation may be difficult at times due to change in the phenotype of the cells. Cells with similar surface phenotype but synthesizing different cytokines and having different functional characteristics can be analyzed with this technique.

Multicriteria analysis of product operational effectiveness at design stages

NASA Astrophysics Data System (ADS)

Irzaev, G. Kh

2018-03-01

The multicriteria rapid assessment method of techno-economic parameters of new products is developed. It avoids expensive engineering changes during the operational stages through the analysis of external and internal factors at an early stage in the design that affect the maintainability and manufacturability of the product. The expert selection of the initial multitude of indicators from the five enlarged criteria groups and their subsequent pairwise comparison allow one to distinguish the complex compliance criteria of product design with the average and optimum values of the operational effectiveness. The values comparison provides an opportunity to decide on the continuation of the process for designing and preparation of the product manufacture.

A Proposal of Product Development Collaboration Method Using User Support Information and its Experimental Evaluation

NASA Astrophysics Data System (ADS)

Tanaka, Mitsuru; Kataoka, Masatoshi; Koizumi, Hisao

As the market changes more rapidly and new products continue to get more complex and multifunctional, product development collaboration with competent partners and leading users is getting more important to come up with new products that are successful in the market in a timely manner. ECM (engineering chain management) and SCM (supply chain management) are supply-side approaches toward this collaboration. In this paper, we propose a demand-side approach toward product development collaboration with users based on the information gathered through user support interactions. The approach and methodology proposed here was applied to a real data set, and its effectiveness was verified.

Quantifying Components of Drug Expenditure Inflation: The British Columbia Seniors' Drug Benefit Plan

PubMed Central

Morgan, Steven G

2002-01-01

Objective To quantify the relative and absolute importance of different factors contributing to increases in per capita prescription drug costs for a population of Canadian seniors. Data Sources/Study Setting Data consist of every prescription claim from 1985 to 1999 for the British Columbia Pharmacare Plan A, a tax-financed public drug plan covering all community-dwelling British Columbians aged 65 and older. Study Design Changes in per capita prescription drug expenditures are attributed to changes to four components of expenditure inflation: (1) the pattern of exposure to drugs across therapeutic categories; (2) the mix of drugs used within therapeutic categories; (3) the rate of generic drug product selection; and (4) the prices of unchanged products. Data Collection/Extraction Methods Data were extracted from administrative claims files housed at the UBC Centre for Health Services and Policy Research. Principal Findings Changes in drug prices, the pattern of exposure to drugs across therapeutic categories, and the mix of drugs used within therapeutic categories all caused spending per capita to increase. Incentives for generic substitution and therapeutic reference pricing policies temporarily slowed the cost-increasing influence of changes in product selection by encouraging the use of generic drug products and/or cost-effective brand-name products within therapeutic categories. Conclusions The results suggest that drug plans (and patients) would benefit from more concerted efforts to evaluate the relative cost-effectiveness of competing products within therapeutic categories of drugs. PMID:12479495

Method for construction of bacterial strains with increased succinic acid production

DOEpatents

Donnelly, Mark I.; Sanville-Millard, Cynthia; Chatterjee, Ranjini

2000-01-01

A fermentation process for producing succinic acid is provided comprising selecting a bacterial strain that does not produce succinic acid in high yield, disrupting the normal regulation of sugar metabolism of said bacterial strain, and combining the mutant bacterial strain and selected sugar in anaerobic conditions to facilitate production of succinic acid. Also provided is a method for changing low yield succinic acid producing bacteria to high yield succinic acid producing bacteria comprising selecting a bacterial strain having a phosphotransferase system and altering the phosphotransferase system so as to allow the bacterial strain to simultaneously metabolize different sugars.

Integration of Mahalanobis-Taguchi system and traditional cost accounting for remanufacturing crankshaft

NASA Astrophysics Data System (ADS)

Abu, M. Y.; Norizan, N. S.; Rahman, M. S. Abd

2018-04-01

Remanufacturing is a sustainability strategic planning which transforming the end of life product to as new performance with their warranty is same or better than the original product. In order to quantify the advantages of this strategy, all the processes must implement the optimization to reach the ultimate goal and reduce the waste generated. The aim of this work is to evaluate the criticality of parameters on the end of life crankshaft based on Taguchi’s orthogonal array. Then, estimate the cost using traditional cost accounting by considering the critical parameters. By implementing the optimization, the remanufacturer obviously produced lower cost and waste during production with higher potential to gain the profit. Mahalanobis-Taguchi System was proven as a powerful method of optimization that revealed the criticality of parameters. When subjected the method to the MAN engine model, there was 5 out of 6 crankpins were critical which need for grinding process while no changes happened to the Caterpillar engine model. Meanwhile, the cost per unit for MAN engine model was changed from MYR1401.29 to RM1251.29 while for Caterpillar engine model have no changes due to the no changes on criticality of parameters consideration. Therefore, by integrating the optimization and costing through remanufacturing process, a better decision can be achieved after observing the potential profit will be gained. The significant of output demonstrated through promoting sustainability by reducing re-melting process of damaged parts to ensure consistent benefit of return cores.

Simulating the impact of changing trends in smoking and obesity on productivity of an industrial population: an observational study

PubMed Central

Bhojani, Faiyaz A; Tsai, Shan P; Wendt, Judy K; Koller, Kim L

2014-01-01

Objective To estimate the impact of trends in smoking and obesity prevalence on productivity loss among petrochemical employees from 1980 to 2009. Methods Smoking and obesity informations were collected during company physical examinations. Productivity loss was calculated as differential workdays lost between smokers and non-smokers, and obese and normal-weight employees. Results During 1980–2009, smoking prevalence decreased from 32% to 17%, while obesity prevalence increased from 14% to 42%. In 1982, lost productivity from obesity was an estimated 43 days/100 employees, and for smoking, 65 days/100 employees, but by 1987, workdays lost due to obesity exceeded that attributable to smoking. In 2007, workdays lost from obesity were 3.7 times higher than for smoking. Conclusions Owing to the increasing trend in obesity, the productivity impact on employers from obesity will continue to rise without effective measures supporting employee efforts to achieve healthy weight through sustainable lifestyle changes. PMID:24747795

Satellite passive microwave detection of surface water inundation changes over the pan-Arctic from AMSR

NASA Astrophysics Data System (ADS)

Du, J.; Kimball, J. S.; Jones, L. A.; Watts, J. D.

2016-12-01

Climate is one of the key drivers of crop suitability and productivity in a region. The influence of climate and weather on the growing season determine the amount of time crops spend in each growth phase, which in turn impacts productivity and, more importantly, yields. Planting date can have a strong influence on yields with earlier planting generally resulting in higher yields, a sensitivity that is also present in some crop models. Furthermore, planting date is already changing and may continue, especially if longer growing seasons caused by future climate change drive early (or late) planting decisions. Crop models need an accurate method to predict plant date to allow these models to: 1) capture changes in crop management to adapt to climate change, 2) accurately model the timing of crop phenology, and 3) improve crop simulated influences on carbon, nutrient, energy, and water cycles. Previous studies have used climate as a predictor for planting date. Climate as a plant date predictor has more advantages than fixed plant dates. For example, crop expansion and other changes in land use (e.g., due to changing temperature conditions), can be accommodated without additional model inputs. As such, a new methodology to implement a predictive planting date based on climate inputs is added to the Accelerated Climate Model for Energy (ACME) Land Model (ALM). The model considers two main sources of climate data important for planting: precipitation and temperature. This method expands the current temperature threshold planting trigger and improves the estimated plant date in ALM. Furthermore, the precipitation metric for planting, which synchronizes the crop growing season with the wettest months, allows tropical crops to be introduced to the model. This presentation will demonstrate how the improved model enhances the ability of ALM to capture planting date compared with observations. More importantly, the impact of changing the planting date and introducing tropical crops will be explored. Those impacts include discussions on productivity, yield, and influences on carbon and energy fluxes.

Methods for interpreting change over time in patient-reported outcome measures.

PubMed

Wyrwich, K W; Norquist, J M; Lenderking, W R; Acaster, S

2013-04-01

Interpretation guidelines are needed for patient-reported outcome (PRO) measures' change scores to evaluate efficacy of an intervention and to communicate PRO results to regulators, patients, physicians, and providers. The 2009 Food and Drug Administration (FDA) Guidance for Industry Patient-Reported Outcomes (PRO) Measures: Use in Medical Product Development to Support Labeling Claims (hereafter referred to as the final FDA PRO Guidance) provides some recommendations for the interpretation of change in PRO scores as evidence of treatment efficacy. This article reviews the evolution of the methods and the terminology used to describe and aid in the communication of meaningful PRO change score thresholds. Anchor- and distribution-based methods have played important roles, and the FDA has recently stressed the importance of cross-sectional patient global assessments of concept as anchor-based methods for estimation of the responder definition, which describes an individual-level treatment benefit. The final FDA PRO Guidance proposes the cumulative distribution function (CDF) of responses as a useful method to depict the effect of treatments across the study population. While CDFs serve an important role, they should not be a replacement for the careful investigation of a PRO's relevant responder definition using anchor-based methods and providing stakeholders with a relevant threshold for the interpretation of change over time.

WLN's Database: New Directions.

ERIC Educational Resources Information Center

Ziegman, Bruce N.

1988-01-01

Describes features of the Western Library Network's database, including the database structure, authority control, contents, quality control, and distribution methods. The discussion covers changes in distribution necessitated by increasing telecommunications costs and the development of optical data disk products. (CLB)

Correction to: Self-Directed Gambling Changes: Trajectory of Problem Gambling Severity in Absence of Treatment.

PubMed

Kushnir, Vladyslav; Godinho, Alexandra; Hodgins, David C; Hendershot, Christian S; Cunningham, John A

2018-05-19

The original version of this article unfortunately contained errors in the Methods section. The citations blinded during the review process were inadvertently omitted during the production process and subsequent stages.

Development and beyond: Strategy for long-term maintenance of an online laser diffraction particle size method in a spray drying manufacturing process.

PubMed

Medendorp, Joseph; Bric, John; Connelly, Greg; Tolton, Kelly; Warman, Martin

2015-08-10

The purpose of this manuscript is to present the intended use and long-term maintenance strategy of an online laser diffraction particle size method used for process control in a spray drying process. A Malvern Insitec was used for online particle size measurements and a Malvern Mastersizer was used for offline particle size measurements. The two methods were developed in parallel with the Mastersizer serving as the reference method. Despite extensive method development across a range of particle sizes, the two instruments demonstrated different sensitivities to material and process changes over the product lifecycle. This paper will describe the procedure used to ensure consistent alignment of the two methods, thus allowing for continued use of online real-time laser diffraction as a surrogate for the offline system over the product lifecycle. Copyright © 2015 Elsevier B.V. All rights reserved.

Decadal Changes in Global Ocean Annual Primary Production

NASA Technical Reports Server (NTRS)

Gregg, Watson; Conkright, Margarita E.; Behrenfeld, Michael J.; Ginoux, Paul; Casey, Nancy W.; Koblinsky, Chester J. (Technical Monitor)

2002-01-01

The Sea-viewing Wide Field-of-View Sensor (SeaWiFS) has produced the first multi-year time series of global ocean chlorophyll observations since the demise of the Coastal Zone Color Scanner (CZCS) in 1986. Global observations from 1997-present from SeaWiFS combined with observations from 1979-1986 from the CZCS should in principle provide an opportunity to observe decadal changes in global ocean annual primary production, since chlorophyll is the primary driver for estimates of primary production. However, incompatibilities between algorithms have so far precluded quantitative analysis. We have developed and applied compatible processing methods for the CZCS, using modern advances in atmospheric correction and consistent bio-optical algorithms to advance the CZCS archive to comparable quality with SeaWiFS. We applied blending methodologies, where in situ data observations are incorporated into the CZCS and SeaWiFS data records, to provide improvement of the residuals. These re-analyzed, blended data records provide maximum compatibility and permit, for the first time, a quantitative analysis of the changes in global ocean primary production in the early-to-mid 1980's and the present, using synoptic satellite observations. An intercomparison of the global and regional primary production from these blended satellite observations is important to understand global climate change and the effects on ocean biota. Photosynthesis by chlorophyll-containing phytoplankton is responsible for biotic uptake of carbon in the oceans and potentially ultimately from the atmosphere. Global ocean annual primary decreased from the CZCS record to SeaWiFS, by nearly 6% from the early 1980s to the present. Annual primary production in the high latitudes was responsible for most of the decadal change. Conversely, primary production in the low latitudes generally increased, with the exception of the tropical Pacific. The differences and similarities of the two data records provide evidence of how the Earth's climate may be changing and how ocean biota respond. Furthermore, the results have implications for the ocean carbon cycle.

Improvement of production layout based on optimum production balancing scale results by using Moodie Young and Comsoal method

NASA Astrophysics Data System (ADS)

Ikhsan, Siregar; Ulina Anastasia Sipangkar, Tri; Prasetio, Aji

2017-09-01

This research was conducted at a make to order production system company which is engaged in the car body of the vehicle. One of the products produced is dump truck which is one kind of transportation for the transport of goods equipped with hydraulics to facilitate goods’ loading and unloading process. The company has 7 work stations with different cycle times. Companies often experience delays in order delivery. The production process on the production floor has not been done optimally where there is a build up of work in process in some work centres. The build up of work in process (WIP) products is seen in the welding and painting stations. Stacking that occurs on the production line may cause the company to be liable for damages due to delays in product completion. The WIP occurs due to unbalanced paths can be seen from the variance of cycle time of each station is very diverse. The time difference of each work element is due to the allocation of work elements to each work centre unevenly. On the basis of the allocation of uneven work elements, the dump truck assembly line is made. The analysis is done by using Moodie Young and Comsoal method to do the balancing of production line. The result of layout improvement by using systematic layout planning (SLP) method is change the composition of the work centre from 7 into 4 work centre which enables the movement of material to be more effective and efficient so that it can get an efficient and effective production trajectory and can solve existing problems. The result of the track balancing is then used as a guide in constructing a new layout based on the balancing result with the most optimum method.

Optimum cooking conditions for shrimp and Atlantic salmon.

PubMed

Brookmire, Lauren; Mallikarjunan, P; Jahncke, M; Grisso, R

2013-02-01

The quality and safety of a cooked food product depends on many variables, including the cooking method and time-temperature combinations employed. The overall heating profile of the food can be useful in predicting the quality changes and microbial inactivation occurring during cooking. Mathematical modeling can be used to attain the complex heating profile of a food product during cooking. Studies were performed to monitor the product heating profile during the baking and boiling of shrimp and the baking and pan-frying of salmon. Product color, texture, moisture content, mass loss, and pressed juice were evaluated during the cooking processes as the products reached the internal temperature recommended by the FDA. Studies were also performed on the inactivation of Salmonella cocktails in shrimp and salmon. To effectively predict inactivation during cooking, the Bigelow, Fermi distribution, and Weibull distribution models were applied to the Salmonella thermal inactivation data. Minimum cooking temperatures necessary to destroy Salmonella in shrimp and salmon were determined. The heating profiles of the 2 products were modeled using the finite difference method. Temperature data directly from the modeled heating profiles were then used in the kinetic modeling of quality change and Salmonella inactivation during cooking. The optimum cooking times for a 3-log reduction of Salmonella and maintaining 95% of quality attributes are 100, 233, 159, 378, 1132, and 399 s for boiling extra jumbo shrimp, baking extra jumbo shrimp, boiling colossal shrimp, baking colossal shrimp, baking Atlantic salmon, and pan frying Atlantic Salmon, respectively. © 2013 Institute of Food Technologists®

Improved 68 Ga-labeling method using ethanol addition: Application to the α-helical peptide DOTA-FAMP.

PubMed

Hasegawa, Koki; Kawachi, Emi; Uehara, Yoshinari; Yoshida, Tsuyoshi; Imaizumi, Satoshi; Ogawa, Masahiro; Miura, Shin-Ichiro; Saku, Keijiro

2017-01-01

We examined the 68 Ga labeling of the α-helical peptide, DOTA-FAMP, and evaluated conformational changes during radiolabeling. 68 Ga-DOTA-FAMP is a positron emission tomography probe candidate for atherosclerotic plaques. The labeling yield achieved by Zhernosekov's method (using acetone for 68 Ga purification) was compared with that achieved by the original and 2 modified Mueller's methods (using NaCl solution). Modified method I involves desalting the 68 Ga prior to labeling, and modified method II involves the inclusion of ethanol in the labeling solution. The labeling yield using Zhernosekov's method was 62% ± 5.4%. In comparison, Mueller's original method gave 8.9% ± 1.7%. Modified method I gave a slight improvement of 32% ± 2.1%. Modified method II further increased the yield to 66% ± 3.4%. Conformational changes were determined by circular dichroism spectroscopy, revealing that these differences could be attributed to conformational changes. Heat treatment affects peptide conformation, which leads to aggregation and decreases the labeling yield. Mueller's method is simpler, but harsh conditions preclude its application to biomolecules. To suppress aggregation, we included a desalting process and added ethanol in the labeling solution. These changes significantly improved the labeling yield. Before use for imaging, conformational changes of biomolecules during radiolabeling should be evaluated by circular dichroism spectroscopy to ensure the homogeneity of the labeled product. Copyright © 2016 John Wiley & Sons, Ltd.

A method for assessing work productivity and flexibility in livestock farms.

PubMed

Hostiou, N; Dedieu, B

2012-05-01

Changes affecting livestock farming systems have made farm work a central concern for both the sector and for farmers themselves. Increased pressure on farms to be competitive and productive together with farmers' demand for greater autonomy, holidays or time to spend on private activities and the family converge to underline the two key dimensions of work - productivity and flexibility - required for the assessment of work organization. This paper proposes a method called the QuaeWork (QUAlification and Evaluation of Work in livestock farms) to assess work productivity and flexibility on a farm, and its use to identify how livestock management can contribute to work organization on dairy farms. The QuaeWork method was set up through an iterative process combining surveys conducted with farmers in two regions of France, discussions with different experts and literature review. The QuaeWork was applied on a sample of seven dairy farms in the southern Massif Central in France to identify patterns of how livestock management contributes to work organization. The QuaeWork was used to analyse work organization over the year through a systemic approach to the farm, integrating interactions between herd and land management, workforce composition, equipment facilities and combinations of activities through a characterization of 'who does what, when and for how long'. The criteria for assessing work productivity were work duration (routine work, seasonal work) and work efficiency (per livestock unit or hectare of utilized agricultural area). The criteria for assessing work flexibility were room for manoeuvre and adjustments to internal and external events. The three main patterns of livestock management practices to work organization were identified. In pattern-1, farmers used indoor stable feeding practices with delegated work, with moderate room for manoeuvre and efficiency. In pattern-3, farmers used simplified milking, reproduction and breeding practices to seasonalize work and make it efficient with consistent room for manoeuvre. The method suggests social sustainability criteria to assess work productivity and flexibility, which are important for making reasoned decisions on livestock farm changes, especially innovations. Researchers could usefully exploit the QuaeWork to integrate work objectives (productivity, flexibility) into technical and economic goals.

Risk factors for crop health under global change and agricultural shifts: a framework of analyses using rice in tropical and subtropical Asia as a model.

PubMed

Savary, S; Mila, A; Willocquet, L; Esker, P D; Carisse, O; McRoberts, N

2011-06-01

Plant disease epidemiology requires expansion of its current methodological and theoretical underpinnings in order to produce full contributions to global food security and global changes. Here, we outline a framework which we applied to farmers' field survey data set on rice diseases in the tropical and subtropical lowlands of Asia. Crop health risks arise from individual diseases, as well as their combinations in syndromes. Four key drivers of agricultural change were examined: labor, water, fertilizer, and land availability that translate into crop establishment method, water shortage, fertilizer input, and fallow period duration, respectively, as well as their combinations in production situations. Various statistical approaches, within a hierarchical structure, proceeding from higher levels of hierarchy (production situations and disease syndromes) to lower ones (individual components of production situations and individual diseases) were used. These analyses showed that (i) production situations, as wholes, represent very large risk factors (positive or negative) for occurrence of disease syndromes; (ii) production situations are strong risk factors for individual diseases; (iii) drivers of agricultural change represent strong risk factors of disease syndromes; and (iv) drivers of change, taken individually, represent small but significant risk factors for individual diseases. The latter analysis indicates that different diseases are positively or negatively associated with shifts in these drivers. We also report scenario analyses, in which drivers of agricultural change are varied in response to possible climate and global changes, generating predictions of shifts in rice health risks. The overall set of analyses emphasizes the need for large-scale ground data to define research priorities for plant protection in rapidly evolving contexts. They illustrate how a structured theoretical framework can be used to analyze emergent features of agronomic and socioecological systems. We suggest that the concept of "disease syndrome" can be borrowed in botanical epidemiology from public health to emphasize a holistic view of disease in shifting production situations in combination with the conventional, individual disease-centered perspective.

Preparation of crotaline F-ab antivenom (CroFab) with automated mixing methods: in vitro observations.

PubMed

Vohra, Rais; Kelner, Michael; Clark, Richard F

2009-01-01

Crotaline Polyvalent Ovine Fab antivenom (CroFab, Savage Laboratories and Protherics Inc., Brentwood, TN, USA) preparation requires that the lyophilized powder be manually reconstituted before use. We compared automated methods for driving the product into solution with the standard manual method of reconstitution, and the effect of repeated rinsing of the product vial, on the per-vial availability of antivenom. Normal saline (NS, 10 mL) was added to 12 vials of expired CroFab. Vials were assigned in pairs to each of six mixing methods, including one pair mixed manually as recommended by the product package insert. Each vial's contents were diluted to a final volume of 75 mL of normal saline. Protein concentration was measured with a colorimetric assay. The fluid left in each vial was removed and the vial was washed with 10 mL NS. Total protein yield from each step was calculated. There was no significant change in protein yield among three of five automated mixing methods when compared to manual reconstitution. Repeat rinsing of the product vial with an additional 10 mLs of fluid added to the protein yield regardless of the mixing method used. We found slightly higher protein yields with all automated methods compared to manual mixing, but only two of five comparisons with the standard mixing method demonstrated statistical significance. However, for all methods tested, the addition of a second rinsing and recovery step increased the amount of protein recovered considerably, presumably by allowing solution of protein trapped in the foamy residues. Automated mixing methods and repeat rinsing of the product vial may allow higher protein yields in the preparation of CroFab antivenom.

From discovery to development: current industry perspectives for the development of novel methods of helminth control in livestock.

PubMed

Waller, P J

2006-06-30

Despite the extraordinary success in the development of anthelmintics in the latter part of the last century, helminth parasites of domestic ruminants continue to pose the greatest infectious disease problem in grazing livestock systems worldwide. Newly emerged threats to continuing successful livestock production, particularly with small ruminants, are the failure of this chemotherapeutic arsenal due to the widespread development of anthelmintic resistance at a time when the likelihood of new products becoming commercially available seems more remote. Changing public attitudes with regards to animal welfare, food preferences and safety will also significantly impact on the ways in which livestock are managed and their parasites are controlled. Superimposed on this are changes in livestock demographics internationally, in response to evolving trade policies and demands for livestock products. In addition, is the apparently ever-diminishing numbers of veterinary parasitology researchers in both the public and private sectors. Industries, whether being the livestock industries, the public research industries, or the pharmaceutical industries that provide animal health products, must adapt to these changes. In the context of helminth control in ruminant livestock, the mind-set of 'suppression' needs to be replaced by 'management' of parasites to maintain long-term profitable livestock production. Existing effective chemical groups need to be carefully husbanded and non-chemotherapeutic methods of parasite control need to be further researched and adopted, if and when, they become commercially available. This will require veterinary parasitology researchers from both the public and private sectors to work in close co-operation to ensure 'sustainability' - not only of the livestock industries that they service - but also for their very own activities and enterprises.

Carbon-climate-human interactions in an integrated human-Earth system model

NASA Astrophysics Data System (ADS)

Calvin, K. V.; Bond-Lamberty, B. P.; Jones, A. D.; Shi, X.

2016-12-01

The C4MIP and CMIP5 results highlighted large uncertainties in climate projections, driven to a large extent by limited understanding of the interactions between terrestrial carbon-cycle and climate feedbacks, and their associated uncertainties. These feedbacks are dominated by uncertainties in soil processes, disturbance dynamics, ecosystem response to climate change, and agricultural productivity, and land-use change. This research addresses three questions: (1) how do terrestrial feedbacks vary across different levels of climate change, (2) what is the relative contribution of CO2 fertilization and climate change, and (3) how robust are the results across different models and methods? We used a coupled modeling framework that integrates an Integrated Assessment Model (modeling economic and energy activity) with an Earth System Model (modeling the natural earth system) to examine how business-as-usual (RCP 8.5) climate change will affect ecosystem productivity, cropland extent, and other aspects of the human-Earth system. We find that higher levels of radiative forcing result in higher productivity growth, that increases in CO2 concentrations are the dominant contributors to that growth, and that our productivity increases fall in the middle of the range when compared to other CMIP5 models and the AgMIP models. These results emphasize the importance of examining both the anthropogenic and natural components of the earth system, and their long-term interactive feedbacks.

[Evolution of maize climate productivity and its response to climate change in Heilongjiang Province, China.

PubMed

Li, Xiu Fen; Zhao, Hui Ying; Zhu, Hai Xia; Wang, Ping; Wang, Qiu Jing; Wang, Ming; Li, Yu Guang

2016-08-01

Under the background of climate change, revealing the change trend and spatial diffe-rence of maize climate productivity in-depth and understanding the regularity of maize climatic resources utilization can provide scientific basis for the macro-decision of agricultural production in Heilongjiang Province. Based on the 1981-2014 meteorological data of 72 weather stations and the corresponding maize yield data in Heilongjiang Province, by the methods of step by step revisal, spatial interpolation and linear trend analysis, this paper studied the photosynthetic productivity (PP), light-temperature productivity (LTP), and climatic productivity (CP) of spring maize, and their temporal and spatial variation characteristics, main influencing factors and light energy utilization efficiency, and evaluated the maize climate productivities under different climate scenarios in the future. The results showed that during the study period, the mean PP, LTP and CP in Heilongjiang Province were 26558, 19953, 18742 kg·hm -2 , respectively. Maize PP, LTP and CP were high in plains and low in mountains, and gradually decreased from southwest to northeast. PP, LTP and CP presented significantly increasing trends, and the increase rates were 378, 723 and 560 kg·hm -2 ·(10 a) -1 , respectively. The increase of radiation and temperature had positive effect on maize production in Heilongjiang Province. The potential productivity of maize presented significant response to climate change. The decrease of solar radiation led to the decline of PP in western Songnen Plain, but the increased temperature compensated the negative effect of solar radiation, so the downward trend of LTP was slowed. The response to climate warming was particularly evident in North and East, and LTP was significantly increased, which was sensitive to the change of precipitation in southwest of Songnen Plain and part of Sanjiang Plain. The average ratio of maize actual yield to its climate productivity was only 24.1%, there was still 75.9% to be developed. In the future, the warm and wet climate would benefit the improvement of maize climate productivity, while the cold and dry climate would make an adverse impact.

Prototype development of user specific climate services

NASA Astrophysics Data System (ADS)

Jacob, Daniela

2017-04-01

Systematic consultations in the last years with representatives from sectors particularly affected by climate change have helped the Climate Service Center Germany (GERICS) to identify the most pressing needs of stakeholders from public and private sectors. Besides the development of innovative climate service products and methods, areas are also identified, for which intensive research activities have to be initiated. An example is the demand of decision makers for high-resolution climate change information needed at regional to local levels for their activities towards climate change adaptation. For questions concerning adaptation to climate change, no standard solutions can be provided. Different from mitigation measures, adaptation measures must be framed in accordance with the specific circumstances prevailing in the local situation. Here, individual solutions, which satisfy the individual requirements and needs, are necessary. They have to be developed in close co-operation with the customers and users. For example, the implications of climate change on strategic and operative decisions, e.g. in enterprises and urban planning, are becoming increasingly important. Therefore, high-quality consultancy for businesses and public administration is needed, in order to support decision makers in identifying associated risks and opportunities. For the development of prototype products, GERICS has framed a general methodological approach, including the idea generation, the iterative development, and the prototype testing in co-development with the user. High process transparency and high product quality are prerequisite for the success of a product. The co-development process ensures the best possible communication of user tailored climate change information for different target groups.

The in-line measurement of plant cell biomass using radio frequency impedance spectroscopy as a component of process analytical technology.

PubMed

Holland, Tanja; Blessing, Daniel; Hellwig, Stephan; Sack, Markus

2013-10-01

Radio frequency impedance spectroscopy (RFIS) is a robust method for the determination of cell biomass during fermentation. RFIS allows non-invasive in-line monitoring of the passive electrical properties of cells in suspension and can distinguish between living and dead cells based on their distinct behavior in an applied radio frequency field. We used continuous in situ RFIS to monitor batch-cultivated plant suspension cell cultures in stirred-tank bioreactors and compared the in-line data to conventional off-line measurements. RFIS-based analysis was more rapid and more accurate than conventional biomass determination, and was sensitive to changes in cell viability. The higher resolution of the in-line measurement revealed subtle changes in cell growth which were not accessible using conventional methods. Thus, RFIS is well suited for correlating such changes with intracellular states and product accumulation, providing unique opportunities for employing systems biotechnology and process analytical technology approaches to increase product yield and quality. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Changes in arctic and boreal ecosystem productivity in response to changes in growing season length

NASA Astrophysics Data System (ADS)

Hmimina, G.; Yu, R.; Billesbach, D. P.; Huemmrich, K. F.; Gamon, J. A.

2017-12-01

Large-scale greening and browning trends have been reported in northern terrestrial ecosystems over the last two decades. The greening is interpreted as an increased productivity in response to increases in temperature. Boreal and arctic ecosystem productivity is expected to increase as the length of growing seasons increases, resulting in a bigger northern carbon sink pool. While evidences of such greening based on the use of remotely-sensed vegetation indices are compelling, analysis over the sparse network of flux tower sites available in northern latitudes paint a more complex story, and raise some issues as to whether vegetation indices based on NIR reflectance at large spatial scales are suited to the analysis of very fragmented landscapes that exhibit strong patterns in snow and standing water cover. In a broader sense, whether "greenness" is a sufficiently good proxy of ecosystem productivity in northern latitudes is unclear. The current work focused on deriving continuous estimates of ecosystem potential productivity and photosynthesis limitation over a network of flux towers, and on analyzing the relationships between potential yearly productivity and the length of the growing season over time and space. A novel partitioning method was used to derive ecophysiological parameters from sparse carbon fluxes measurements, and those parameters were then used to delimit the growing season and to estimate potential yearly productivity over a wide range of ecosystems. The relationships obtained between those two metrics were then computed for each of the 23 studied sites, exhibiting a wide range of different responses to changes in growing season length. While an overall significant increasing productivity trend was found (R²=0.12) suggesting increased productivity, the more northern sites exhibited a consistent decreasing trend (0.11 The attribution of these trends to either changes in potential productivity or productivity limitation by abiotic factors will be discussed, as well as the potential of extending this analysis over space by using remote-sensing data along with flux tower data.

Land cover mapping and change detection in urban watersheds using QuickBird high spatial resolution satellite imagery

NASA Astrophysics Data System (ADS)

Hester, David Barry

The objective of this research was to develop methods for urban land cover analysis using QuickBird high spatial resolution satellite imagery. Such imagery has emerged as a rich commercially available remote sensing data source and has enjoyed high-profile broadcast news media and Internet applications, but methods of quantitative analysis have not been thoroughly explored. The research described here consists of three studies focused on the use of pan-sharpened 61-cm spatial resolution QuickBird imagery, the spatial resolution of which is the highest of any commercial satellite. In the first study, a per-pixel land cover classification method is developed for use with this imagery. This method utilizes a per-pixel classification approach to generate an accurate six-category high spatial resolution land cover map of a developing suburban area. The primary objective of the second study was to develop an accurate land cover change detection method for use with QuickBird land cover products. This work presents an efficient fuzzy framework for transforming map uncertainty into accurate and meaningful high spatial resolution land cover change analysis. The third study described here is an urban planning application of the high spatial resolution QuickBird-based land cover product developed in the first study. This work both meaningfully connects this exciting new data source to urban watershed management and makes an important empirical contribution to the study of suburban watersheds. Its analysis of residential roads and driveways as well as retail parking lots sheds valuable light on the impact of transportation-related land use on the suburban landscape. Broadly, these studies provide new methods for using state-of-the-art remote sensing data to inform land cover analysis and urban planning. These methods are widely adaptable and produce land cover products that are both meaningful and accurate. As additional high spatial resolution satellites are launched and the cost of high resolution imagery continues to decline, this research makes an important contribution to this exciting era in the science of remote sensing.

Advanced glycation end-products: a review.

PubMed

Singh, R; Barden, A; Mori, T; Beilin, L

2001-02-01

Advanced glycation end-products are a complex and heterogeneous group of compounds that have been implicated in diabetes related complications. At present it is not known if they are the cause or the consequence of the complications observed. We discuss the chemistry of advanced glycated end-product formation and their patho-biochemistry particularly in relation to the diabetic microvascular complications of retinopathy, neuropathy and nephropathy as well as their role in the accelerated vasculopathy observed in diabetes. The concept of carbonyl stress as a cause for advanced glycated end-product toxicity is mentioned. We discuss alterations in the concentrations of advanced glycated end-products in the body, particularly in relation to changes occurring with age, diabetes and its complications such as nephropathy. Problems relating to current methods of advanced glycated end-product detection and measurement are highlighted including the lack of a universally established method of detection or unit of measurement. Agents used for the treatment of advanced glycated end-product accumulation are reviewed, with an emphasis on the results of the recent phase III trials using aminoguanidine and diabetes related complications.

[Ergonomics and productivity: an example applied to a manufacturing industry].

PubMed

Battevi, Natale; Vitelli, Nora

2013-01-01

The survival of manufacturing in the western world also depends on the ability to increase productivity. To achieve this goal, it is necessary to recover the efficiency of all workers suffering from upper limb biomechanical overload disease. Ergonomic methods can be a valuable tool in solving this apparent conflict: operatives'productivity and health. After carrying out an ergonomic education and training programme for all company employees and risk assessment for upper limb biomechanical overload through the OCRA checklist method, a programme of improvements on a production line was planned and tested, mainly based on international and European standards. Within approximately 2 years, thanks to changes in workplace layout and organization, a significant reduction of 22.7% in risk level was achieved and, at the same time, a 16% increase in productivity. An ergonomic approach based on global, interdisciplinary and participatory principles in the case considered showed that it is possible to match increased productivity with decreased risk. In this specific case application of ergonomic principles during product design was rather poor, which is typical of companies working for third party customers.

Detection of a sudden change of the field time series based on the Lorenz system

PubMed Central

Li, Fang; Shen, BingLu; Yan, PengCheng; Song, Jian; Ma, DeShan

2017-01-01

We conducted an exploratory study of the detection of a sudden change of the field time series based on the numerical solution of the Lorenz system. First, the time when the Lorenz path jumped between the regions on the left and right of the equilibrium point of the Lorenz system was quantitatively marked and the sudden change time of the Lorenz system was obtained. Second, the numerical solution of the Lorenz system was regarded as a vector; thus, this solution could be considered as a vector time series. We transformed the vector time series into a time series using the vector inner product, considering the geometric and topological features of the Lorenz system path. Third, the sudden change of the resulting time series was detected using the sliding t-test method. Comparing the test results with the quantitatively marked time indicated that the method could detect every sudden change of the Lorenz path, thus the method is effective. Finally, we used the method to detect the sudden change of the pressure field time series and temperature field time series, and obtained good results for both series, which indicates that the method can apply to high-dimension vector time series. Mathematically, there is no essential difference between the field time series and vector time series; thus, we provide a new method for the detection of the sudden change of the field time series. PMID:28141832

Analyzing Activities of Lytic Polysaccharide Monooxygenases by Liquid Chromatography and Mass Spectrometry.

PubMed

Westereng, Bjørge; Arntzen, Magnus Ø; Agger, Jane Wittrup; Vaaje-Kolstad, Gustav; Eijsink, Vincent G H

2017-01-01

Lytic polysaccharide monooxygenases perform oxidative cleavage of glycosidic bonds in various polysaccharides. The majority of LMPOs studied so far possess activity on either cellulose or chitin and analysis of these activities is therefore the main focus of this review. Notably, however, the number of LPMOs that are active on other polysaccharides is increasing. The products generated by LPMOs from cellulose are either oxidized in the downstream end (at C1) or upstream end (at C4), or at both ends. These modifications only result in small structural changes, which makes both chromatographic separation and product identification by mass spectrometry challenging. The changes in physicochemical properties that are associated with oxidation need to be considered when choosing analytical approaches. C1 oxidation leads to a sugar that is no longer reducing but instead has an acidic functionality, whereas C4 oxidation leads to products that are inherently labile at high and low pH and that exist in a keto-gemdiol equilibrium that is strongly shifted toward the gemdiol in aqueous solutions. Partial degradation of C4-oxidized products leads to the formation of native products, which could explain why some authors claim to have observed glycoside hydrolase activity for LPMOs. Notably, apparent glycoside hydrolase activity may also be due to small amounts of contaminating glycoside hydrolases since these normally have much higher catalytic rates than LPMOs. The low catalytic turnover rates of LPMOs necessitate the use of sensitive product detection methods, which limits the analytical possibilities considerably. Modern liquid chromatography and mass spectrometry have become essential tools for evaluating LPMO activity, and this chapter provides an overview of available methods together with a few novel tools. The methods described constitute a suite of techniques for analyzing oxidized carbohydrate products, which can be applied to LPMOs as well as other carbohydrate-active redox enzymes.

Unifying time evolution and optimization with matrix product states

NASA Astrophysics Data System (ADS)

Haegeman, Jutho; Lubich, Christian; Oseledets, Ivan; Vandereycken, Bart; Verstraete, Frank

2016-10-01

We show that the time-dependent variational principle provides a unifying framework for time-evolution methods and optimization methods in the context of matrix product states. In particular, we introduce a new integration scheme for studying time evolution, which can cope with arbitrary Hamiltonians, including those with long-range interactions. Rather than a Suzuki-Trotter splitting of the Hamiltonian, which is the idea behind the adaptive time-dependent density matrix renormalization group method or time-evolving block decimation, our method is based on splitting the projector onto the matrix product state tangent space as it appears in the Dirac-Frenkel time-dependent variational principle. We discuss how the resulting algorithm resembles the density matrix renormalization group (DMRG) algorithm for finding ground states so closely that it can be implemented by changing just a few lines of code and it inherits the same stability and efficiency. In particular, our method is compatible with any Hamiltonian for which ground-state DMRG can be implemented efficiently. In fact, DMRG is obtained as a special case of our scheme for imaginary time evolution with infinite time step.

Reliability ensemble averaging of 21st century projections of terrestrial net primary productivity reduces global and regional uncertainties

NASA Astrophysics Data System (ADS)

Exbrayat, Jean-François; Bloom, A. Anthony; Falloon, Pete; Ito, Akihiko; Smallman, T. Luke; Williams, Mathew

2018-02-01

Multi-model averaging techniques provide opportunities to extract additional information from large ensembles of simulations. In particular, present-day model skill can be used to evaluate their potential performance in future climate simulations. Multi-model averaging methods have been used extensively in climate and hydrological sciences, but they have not been used to constrain projected plant productivity responses to climate change, which is a major uncertainty in Earth system modelling. Here, we use three global observationally orientated estimates of current net primary productivity (NPP) to perform a reliability ensemble averaging (REA) method using 30 global simulations of the 21st century change in NPP based on the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP) business as usual emissions scenario. We find that the three REA methods support an increase in global NPP by the end of the 21st century (2095-2099) compared to 2001-2005, which is 2-3 % stronger than the ensemble ISIMIP mean value of 24.2 Pg C y-1. Using REA also leads to a 45-68 % reduction in the global uncertainty of 21st century NPP projection, which strengthens confidence in the resilience of the CO2 fertilization effect to climate change. This reduction in uncertainty is especially clear for boreal ecosystems although it may be an artefact due to the lack of representation of nutrient limitations on NPP in most models. Conversely, the large uncertainty that remains on the sign of the response of NPP in semi-arid regions points to the need for better observations and model development in these regions.

Application of instrumental evaluation of color for the pre-formulation and formulation of rabeprazole.

PubMed

Rhee, Yun-Seok; Park, Chun-Woong; Shin, Yoon-Sub; Kam, Sung-Hoon; Lee, Kyu-Hyun; Park, Eun-Seok

2008-02-28

The aims of this study were to fast screen the compatibility of rabeprazole and excipients using a spectrocolorimeter and to examine the relationship between the color change value and drug contents/drug degradation products in solid dosage forms. The color change values of rabeprazole-excipient mixtures were measured using a spectrocolorimeter, with six tablet formulations compressed using a single-punch instrumental tablet press. The rabeprazole and degradation products contents in the tablets were analyzed using an HPLC method, with the color change values of the tablets measured using spectrocolorimetery for 4 weeks. These experiments indicated that the instrumental evaluation of color was a speedy, simple and useful tool in the determination of the interaction between the drug and excipients, as well as in the formulation of solid dosage forms. The relationships of the % reduced drug contents versus the color change value, and those of the % drug degradation products versus the color change value were exponentially increased in formulations containing zinc stearate. On stress testing, the color change value of rabeprazole was inconsistent with previous reports, as the degradation of rabeprazole can be greatly influenced by humidity as well as temperature. Consequently, these results highlight the potential of color formation in the application of pre-formulation and formulation of drugs.

Comparison of the impacts of climate change on potential productivity of different staple crops in the agro-pastoral ecotone of North China

NASA Astrophysics Data System (ADS)

Tang, Jianzhao; Wang, Jing; He, Di; Huang, Mingxia; Pan, Zhihua; Pan, Xuebiao

2016-12-01

The aim of this study is to compare the impacts of climate change on the potential productivity and potential productivity gaps of sunflower ( Helianthus annuus), potato (Solanum tuberosum), and spring wheat ( Triticumaestivum Linn) in the agro-pastoral ecotone (APE) of North China. A crop growth dynamics statistical method was used to calculate the potential productivity affected by light, temperature, precipitation, and soil fertility. The growing season average temperature increased by 0.47, 0.48, and 0.52°C per decade ( p < 0.05) for sunflower, potato, and spring wheat, respectively, from 1981 to 2010. Meanwhile, the growing season solar radiation showed a decreasing trend ( p < 0.05) and the growing season precipitation changed non-significantly across APE. The light-temperature potential productivity increased by 4.48% per decade for sunflower but decreased by 1.58% and 0.59% per decade for potato and spring wheat. The climate-soil potential productivity reached only 31.20%, 27.79%, and 20.62% of the light-temperature potential productivity for sunflower, potato, and spring wheat, respectively. The gaps between the light-temperature and climate-soil potential productivity increased by 6.41%, 0.97%, and 1.29% per decade for sunflower, potato, and spring wheat, respectively. The increasing suitability of the climate for sunflower suggested that the sown area of sunflower should be increased compared with potato and spring wheat in APE under future climate warming.

Seasonal Changes in Mycosporine-Like Amino Acid Production Rate with Respect to Natural Phytoplankton Species Composition

PubMed Central

Ha, Sun-Yong; Lee, Yeonjung; Kim, Min-Seob; Kumar, K. Suresh; Shin, Kyung-Hoon

2015-01-01

After in situ incubation at the site for a year, phytoplanktons in surface water were exposed to natural light in temperate lakes (every month); thereafter, the net production rate of photoprotective compounds (mycosporine-like amino acids, MAAs) was calculated using 13C labeled tracer. This is the first report describing seasonal variation in the net production rate of individual MAAs in temperate lakes using a compound-specific stable isotope method. In the mid-latitude region of the Korean Peninsula, UV radiation (UVR) usually peaks from July to August. In Lake Paldang and Lake Cheongpyeong, diatoms dominated among the phytoplankton throughout the year. The relative abundance of Cyanophyceae (Anabaena spiroides) reached over 80% during July in Lake Cheongpyeong. Changes in phytoplankton abundance indicate that the phytoplankton community structure is influenced by seasonal changes in the net production rate and concentration of MAAs. Notably, particulate organic matter (POM) showed a remarkable change based on the UV intensity occurring during that period; this was because of the fact that cyanobacteria that are highly sensitive to UV irradiance dominated the community. POM cultured in Lake Paldang had the greatest shinorine (SH) production rate during October, i.e., 83.83 ± 10.47 fgC·L−1·h−1. The dominance of diatoms indicated that they had a long-term response to UVR. Evaluation of POM cultured in Lake Cheongpyeong revealed that there was an increase in the net MAA production in July (when UVR reached the maximum); a substantial amount of SH, i.e., 17.62 ± 18.34 fgC·L−1·h−1, was recorded during this period. Our results demonstrate that both the net production rate as well as the concentration of MAAs related to photoinduction depended on the phytoplankton community structure. In addition, seasonal changes in UVR also influenced the quantity and production of MAAs in phytoplanktons (especially Cyanophyceae). PMID:26561820

Seasonal Changes in Mycosporine-Like Amino Acid Production Rate with Respect to Natural Phytoplankton Species Composition.

PubMed

Ha, Sun-Yong; Lee, Yeonjung; Kim, Min-Seob; Kumar, K Suresh; Shin, Kyung-Hoon

2015-11-06

After in situ incubation at the site for a year, phytoplanktons in surface water were exposed to natural light in temperate lakes (every month); thereafter, the net production rate of photoprotective compounds (mycosporine-like amino acids, MAAs) was calculated using (13)C labeled tracer. This is the first report describing seasonal variation in the net production rate of individual MAAs in temperate lakes using a compound-specific stable isotope method. In the mid-latitude region of the Korean Peninsula, UV radiation (UVR) usually peaks from July to August. In Lake Paldang and Lake Cheongpyeong, diatoms dominated among the phytoplankton throughout the year. The relative abundance of Cyanophyceae (Anabaena spiroides) reached over 80% during July in Lake Cheongpyeong. Changes in phytoplankton abundance indicate that the phytoplankton community structure is influenced by seasonal changes in the net production rate and concentration of MAAs. Notably, particulate organic matter (POM) showed a remarkable change based on the UV intensity occurring during that period; this was because of the fact that cyanobacteria that are highly sensitive to UV irradiance dominated the community. POM cultured in Lake Paldang had the greatest shinorine (SH) production rate during October, i.e., 83.83 ± 10.47 fgC·L(-1)·h(-1). The dominance of diatoms indicated that they had a long-term response to UVR. Evaluation of POM cultured in Lake Cheongpyeong revealed that there was an increase in the net MAA production in July (when UVR reached the maximum); a substantial amount of SH, i.e., 17.62 ± 18.34 fgC·L(-1)·h(-1), was recorded during this period. Our results demonstrate that both the net production rate as well as the concentration of MAAs related to photoinduction depended on the phytoplankton community structure. In addition, seasonal changes in UVR also influenced the quantity and production of MAAs in phytoplanktons (especially Cyanophyceae).

Dietary fat and not calcium supplementation or dairy product consumption is associated with changes in anthropometrics during a randomized, placebo-controlled energy-restriction trial

PubMed Central

2011-01-01

Insufficient calcium intake has been proposed to cause unbalanced energy partitioning leading to obesity. However, weight loss interventions including dietary calcium or dairy product consumption have not reported changes in lipid metabolism measured by the plasma lipidome. Methods The objective of this study was to determine the relationships between dairy product or supplemental calcium intake with changes in the plasma lipidome and body composition during energy restriction. A secondary objective of this study was to explore the relationships among calculated macronutrient composition of the energy restricted diet to changes in the plasma lipidome, and body composition during energy restriction. Overweight adults (n = 61) were randomized into one of three intervention groups including a deficit of 500kcal/d: 1) placebo; 2) 900 mg/d calcium supplement; and 3) 3-4 servings of dairy products/d plus a placebo supplement. Plasma fatty acid methyl esters of cholesterol ester, diacylglycerol, free fatty acids, lysophosphatidylcholine, phosphatidylcholine, phosphatidylethanolamine and triacylglycerol were quantified by capillary gas chromatography. Results After adjustments for energy and protein (g/d) intake, there was no significant effect of treatment on changes in weight, waist circumference or body composition. Plasma lipidome did not differ among dietary treatment groups. Stepwise regression identified correlations between reported intake of monounsaturated fat (% of energy) and changes in % lean mass (r = -0.44, P < 0.01) and % body fat (r = 0.48, P < 0.001). Polyunsaturated fat intake was associated with the % change in waist circumference (r = 0.44, P < 0.01). Dietary saturated fat was not associated with any changes in anthropometrics or the plasma lipidome. Conclusions Dairy product consumption or calcium supplementation during energy restriction over the course of 12 weeks did not affect plasma lipids. Independent of calcium and dairy product consumption, short-term energy restriction altered body composition. Reported dietary fat composition of energy restricted diets was associated with the degree of change in body composition in these overweight and obese individuals. PMID:21970320

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maurer, D.

In January 1986, the Becon Construction Company - an open-shop contractor based in Houston, Texas - mobilized a work force to a construction project location at the Belridge Oil Field, near Bakersfield, California. The construction craftsmen and helpers in Becon's work force were expected to improve their level of productivity as the work proceeded because of the knowledge and skills that they would acquire as a result of the repetitive nature of the work. As it was originally organized, the Becon HOTS project represented almost a pure laboratory environment in which to collect data concerning the learning effect on workermore » productivity as well as to statistically isolate the impact on productivity of such external factors as weather, absenteeism, turnover, and especially work methods improvement techniques and pay incentives. From the outset of the HOTS project, the project manager had established an accurate system to quantitatively measure and compare the total manhours that each crew - civil, mechanical, electrical, and prefabrication -- performed at individual HOTS construction locations. Additionally, it was initially assumed that the project manager would be relatively free to implement changes to the job site conditions involving incentive pay and work methods improvement. The subsequent effect of these changes on the productivity of separate work crews could then be evaluated in terms of measured manhours per crew per HOTS.« less

How patient outcomes are reported in drug advertisements.

PubMed

Lexchin, J

1999-05-01

To examine how changes in outcomes are reported in drug advertisements in medical journals. Advertisements from a convenience sample of 38 issues of Canadian Family Physician, Canadian Journal of Anaesthesia, Canadian Journal of Psychiatry, Canadian Medical Association Journal, and the New England Journal of Medicine. Method of reporting changes in clinical outcomes (relative risk reduction [RRR], absolute risk reduction [ARR], number needed to treat [NNT]), name of product, and company marketing product were sought. In the 22 advertisements included in the analysis, 11 reported results as RRRs; two reported results as RRRs, but readers could calculate ARRs or NNTs from figures given in the advertisement; and nine gave no measure of results, but readers could calculate RRRs, ARRs, or NNTs from figures given. Most companies report changes in outcomes as RRRs, and this bias could influence the way physicians prescribe. Changes to the rules governing journal advertising and increased emphasis on critical appraisal skills would help mitigate this bias.

Physico-chemical properties of ready to eat, shelf-stable pasta during storage.

PubMed

Carini, E; Curti, E; Cassotta, F; Najm, N E O; Vittadini, E

2014-02-01

The changes in physico-chemical properties of RTE shelf stable pasta were studied during storage with a multianalytical and multidimensional approach (with special focus on water status) to understand the ageing process in this product. Pasta hardness and amylopectin recrystallisation increased, macroscopic water status indicators and proton molecular translational mobility remained constant, and significant changes were measured in the proton rotational molecular mobility indicators ((1)H FID, (1)H T2) during storage. Since the main changes observed in RTE pasta during storage were similar to those observed in other cereal-based products, it would be interesting to verify the effect of the anti-staling methods commonly used in the cereal processing industry in improving RTE pasta shelf-stability. Copyright © 2013 Elsevier Ltd. All rights reserved.

76 FR 19710 - Tobacco Transition Payment Program; Cigar and Cigarette Per Unit Assessments; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-08

... product mix. That paragraph reads as follows: But assuming a situation in which there are substantial small cigar marketings in the actual ``small cigar'' tax category, changing the Step B method would...

Monitoring Changes in Soil Quality from Post-fire Logging in the Inland Northwest

Treesearch

Deborah Page-Dumroese; Martin Jurgensen; Ann Abbott; Tom Rice; Joanne Tirocke; Sue Farley; Sharon DeHart

2006-01-01

The wildland fires of 2000, 2002, and 2003 created many opportunities to conduct post-fire logging operations in the Inland Northwest. Relatively little information is available on the impact of post-fire logging on long-term soil productivity or on the best method for monitoring these changes. We present a USDA Forest Service Northern Region study of post-fire logged...

Staying Competitive. How Small and Mid-Sized Companies Are Meeting the Challenge of a Global Economy. Workforce Brief #1.

ERIC Educational Resources Information Center

Bergman, Terri; Kaufmann, Barbara

Small and mid-sized businesses must change their production and service delivery methods if they are to remain competitive in a global economy. According to businesspersons, service providers, and employees who participated in 18 focus groups in 10 cities throughout the United States, businesses are being forced to change their ways of doing…

Phosphorus and Potassium Content of Enhanced Meat and Poultry Products: Implications for Patients Who Receive Dialysis

PubMed Central

Mehta, Ojas

2009-01-01

Background and objectives: Uncooked meat and poultry products are commonly enhanced by food processors using phosphate salts. The addition of potassium and phosphorus to these foods has been recognized but not quantified. Design, setting, participants, & measurements: We measured the phosphorus, potassium, and protein content of 36 uncooked meat and poultry products: Phosphorus using the Association of Analytical Communities (AOAC) official method 984.27, potassium using AOAC official method 985.01, and protein using AOAC official method 990.03. Results: Products that reported the use of additives had an average phosphate-protein ratio 28% higher than additive free products; the content ranged up to almost 100% higher. Potassium content in foods with additives varied widely; additive free products all contained <387 mg/100 g, whereas five of the 25 products with additives contained at least 692 mg/100 g (maximum 930 mg/100 g). Most but not all foods with phosphate and potassium additives reported the additives (unquantified) on the labeling; eight of 25 enhanced products did not list the additives. The results cannot be applied to other products. The composition of the food additives used by food processors may change over time. Conclusions: Uncooked meat and poultry products that are enhanced may contain additives that increase phosphorus and potassium content by as much as almost two- and three-fold, respectively; this modification may not be discernible from inspection of the food label. PMID:19628683

Targeted, Site-specific quantitation of N- and O-glycopeptides using 18O-labeling and product ion based mass spectrometry.

PubMed

Srikanth, Jandhyam; Agalyadevi, Rathinasamy; Babu, Ponnusamy

2017-02-01

The site-specific quantitation of N- and O-glycosylation is vital to understanding the function(s) of different glycans expressed at a given site of a protein under physiological and disease conditions. Most commonly used precursor ion intensity based quantification method is less accurate and other labeled methods are expensive and require enrichment of glycopeptides. Here, we used glycopeptide product (y and Y0) ions and 18 O-labeling of C-terminal carboxyl group as a strategy to obtain quantitative information about fold-change and relative abundance of most of the glycoforms attached to the glycopeptides. As a proof of concept, the accuracy and robustness of this targeted, relative quantification LC-MS method was demonstrated using Rituximab. Furthermore, the N-glycopeptide quantification results were compared with a biosimilar of Rituximab and validated with quantitative data obtained from 2-AB-UHPLC-FL method. We further demonstrated the intensity fold-change and relative abundance of 46 unique N- and O-glycopeptides and aglycopeptides from innovator and biosimilar samples of Etanercept using both the normal-MS and product ion based quantitation. The results showed a very similar site-specific expression of N- and O-glycopeptides between the samples but with subtle differences. Interestingly, we have also been able to quantify macro-heterogeneity of all N- and O-glycopetides of Etanercept. In addition to applications in biotherapeutics, the developed method can also be used for site-specific quantitation of N- and O-glycopeptides and aglycopeptides of glycoproteins with known glycosylation pattern.

Investigating the spring bloom initiation and net community production in the Subantarctic Southern Ocean using high-resolution in situ glider data

NASA Astrophysics Data System (ADS)

thomalla, sandy; Racault, Marie-Fanny; Swart, Sebastiaan; Monteiro, Pedro

2014-05-01

Phytoplankton bloom phenology has important consequences for marine ecosystems, fisheries and carbon export to the ocean interior. As such, it is important to examine the drivers of phytoplankton bloom initiation and their sensitivity to inter-annual climate variability and change. In this study we use ~6 months of in-situ high-resolution glider data to investigate the spring bloom initiation in the subantarctic zone (SAZ) of the Southern Ocean by implementing three different methods; a rate of change method, a threshold method and a cumulative sum method. The bloom initiation dates are critically compared to one another and the drivers of discrepancies assessed to inform on the sensitivities of different methods to processes driving the seasonal evolution of phytoplankton biomass in the subantarctic. The bloom initiation dates combined with in situ glider data of chlorophyll, light, and mixed layer depth allow us to resolve both Sverdrup's Critical Depth and Behrenfeld's Disturbance Recovery models through the water column and thus determine the seasonal evolution of net community production and respiration rates and the potential for carbon export. The outputs of the two different models are compared to one another in the context of their sensitivities to water column processes thereby refining their ability to address specific system scale questions. The novelty of this study is that gliders provide an unprecedented dataset to assess the seasonal cycle of phytoplankton biomass throughout the water column at high resolution, thus enhancing our understanding of net community production and export processes at submeso-space and sub-seasonal time scales.

Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerrigan, P.

2014-03-01

Building Science Corporation (BSC) worked directly with the David Weekley Homes - Houston division to develop a cost-effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses in preparation for the upcoming code changes in 2015. This research project addressed the following questions: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences?more » 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost?« less

Research productivity in select psychology journals, 1986-2008.

PubMed

Mahoney, Kevin T; Buboltz, Walter C; Calvert, Barbara; Hoffmann, Rebecca

2010-01-01

Examination of research productivity has a long history in psychology. Journals across psychology have periodically published research-productivity studies. An analysis of institutional research productivity was conducted for 17 journals published by the American Psychological Association for the years 1986-2008. This analysis implemented two methodologies: one a replication and extension of G. S. Howard, D. A. Cole, and S. E. Maxwell's (1987) method, the other a new method designed to give credit to psychology departments rather than only overall institutions. A system of proportional credit assured all articles with multiple institutions received credit. Results show that for the 23-year period, the University of Illinois at Urbana-Champaign was ranked 1st, followed by the University of California, Los Angeles, and the University of Michigan, Ann Arbor. Overall, results showed both consistency and change across all journals examined. The authors explore the implications of these findings in the context of the current academic environment.

Can the World's Farmers Feed a World of 10 Billion People In Spite of Climate Change? (Invited)

NASA Astrophysics Data System (ADS)

Easterling, W. E.

2010-12-01

The rapid rise in agricultural productivity due to technological innovation and science-based methods was one of the great human achievements of the 20th century. We now face the prospect of needing to double agricultural output by the latter third of the current century to match the growth of demand for food and fiber—albeit the pace of growth in demand shows signs of slowing in the future. How farmers and the agricultural industry deal with climate change will, in large measure, determine success or failure. The Earth is committed to about the same amount of warming in the future as has been experienced over the past hundred years regardless of future greenhouse gas emissions trajectories; such will require adaptive responses by plants, animals, producers and consumers if society’s goals for global food security are to be met. In this paper, I summarize the state-of-the science of how climate change may affect our global agricultural production system. I review the latest thinking on the combined effects of rising atmospheric CO2 concentration and climate changes on crop productivity across the globe. Prospects for adaptation in agriculturally important regions are examined. While it appears that global food production will be adequate to meet global food demand in spite of advancing climate change, it is clear that many parts of the tropics and dry sub-tropics will see yield decreases and possible loss of comparative advantage. In those regions, continued large population growth and deleterious climate changes will contribute to declining per capita agricultural production. Increasing numbers of people at risk of hunger are probable there.

Interactive color display for multispectral imagery using correlation clustering

NASA Technical Reports Server (NTRS)

Haskell, R. E. (Inventor)

1979-01-01

A method for processing multispectral data is provided, which permits an operator to make parameter level changes during the processing of the data. The system is directed to production of a color classification map on a video display in which a given color represents a localized region in multispectral feature space. Interactive controls permit an operator to alter the size and change the location of these regions, permitting the classification of such region to be changed from a broad to a narrow classification.

Reduction of patulin in apple cider by UV radiation.

PubMed

Dong, Qingfang; Manns, David C; Feng, Guoping; Yue, Tianli; Churey, John J; Worobo, Randy W

2010-01-01

The presence of the mycotoxin patulin in processed apple juice and cider presents a continual challenge to the food industry as both consumer health and product quality issues. Although several methods for control and/or elimination of patulin have been proposed, no unifying method has been commercially successful for reducing patulin burdens while maintaining product quality. In the present study, exposure to germicidal UV radiation was evaluated as a possible commercially viable alternative for the reduction and possible elimination of the patulin mycotoxin in fresh apple cider. UV exposure of 14.2 to 99.4 mJ/cm(2) resulted in a significant and nearly linear decrease in patulin levels while producing no quantifiable changes in the chemical composition (i.e., pH, Brix, and total acids) or organoleptic properties of the cider. For the range of UV doses tested, patulin levels decreased by 9.4 to 43.4%; the greatest reduction was achieved after less than 15 s of UV exposure. The method of UV radiation (the CiderSure 3500 system) is an easily implemented, high-throughput, and cost-effective method that offers simultaneous UV pasteurization of cider and juice products and reduction and/or elimination of patulin without unwanted alterations in the final product.

Production integrated nondestructive testing of composite materials and material compounds - an overview

NASA Astrophysics Data System (ADS)

Straß, B.; Conrad, C.; Wolter, B.

2017-03-01

Composite materials and material compounds are of increasing importance, because of the steadily rising relevance of resource saving lightweight constructions. Quality assurance with appropriate Nondestructive Testing (NDT) methods is a key aspect for reliable and efficient production. Quality changes have to be detected already in the manufacturing flow in order to take adequate corrective actions. For materials and compounds the classical NDT methods for defectoscopy, like X-ray and Ultrasound (US) are still predominant. Nevertheless, meanwhile fast, contactless NDT methods, like air-borne ultrasound, dynamic thermography and special Eddy-Current techniques are available in order to detect cracks, voids, pores and delaminations but also for characterizing fiber content, distribution and alignment. In Metal-Matrix Composites US back-scattering can be used for this purpose. US run-time measurements allow the detection of thermal stresses at the metal-matrix interface. Another important area is the necessity for NDT in joining. To achieve an optimum material utilization and product safety as well as the best possible production efficiency, there is a need for NDT methods for in-line inspection of the joint quality while joining or immediately afterwards. For this purpose EMAT (Electromagnetic Acoustic Transducer) technique or Acoustic Emission testing can be used.

The application of biotechnological methods in authenticity testing.

PubMed

Popping, Bert

2002-09-11

By counterfeiting brand names in the food and drink industry as well as fraudulently labelling and selling low quality products as premium products, this sector of the industry has lost significant amounts of money and the consumer has been deceived. While it was difficult to establish certain types of fraud before the advent of modern biotechnology, DNA-based methods make an important contribution to protect high-quality brand names and protect the consumer. Several years ago, DNA technologies were considered as methods used in universities, primarily for research purpose, not so much for 'real-life' applications. However, this has changed and a number of laboratories have specialised in offering such services to the industry. This article will review DNA-based techniques commonly used for authenticity testing.

In-situ visualisation of hyphal structure and arrangement in mycoprotein pastes.

PubMed

Miri, Taghi; Cox, Philip W; Fryer, Peter J

2003-02-01

A novel method to examine the morphology and structure of fungal hyphae in solid pastes used for the production of meat alternative product is presented. A sample of fermentation broth was fluorescently stained with Calcofluor White and added back to the broth, mixed and then a paste made using ultra-filtration. Fibre visualisation was by fluorescence microscopy and quantification by manual image analysis. This method enables the determination of fibre length and orientation within the paste. Imaging of the hypha fibre paste proved that its structure was 'isotropic', i.e. that fibres were randomly oriented in all directions. Processing of the paste altered the orientation of the fibres, the method was able to identify and quantify the changes in fibre position.

A Two-Stage Method to Determine Optimal Product Sampling considering Dynamic Potential Market

PubMed Central

Hu, Zhineng; Lu, Wei; Han, Bing

2015-01-01

This paper develops an optimization model for the diffusion effects of free samples under dynamic changes in potential market based on the characteristics of independent product and presents a two-stage method to figure out the sampling level. The impact analysis of the key factors on the sampling level shows that the increase of the external coefficient or internal coefficient has a negative influence on the sampling level. And the changing rate of the potential market has no significant influence on the sampling level whereas the repeat purchase has a positive one. Using logistic analysis and regression analysis, the global sensitivity analysis gives a whole analysis of the interaction of all parameters, which provides a two-stage method to estimate the impact of the relevant parameters in the case of inaccuracy of the parameters and to be able to construct a 95% confidence interval for the predicted sampling level. Finally, the paper provides the operational steps to improve the accuracy of the parameter estimation and an innovational way to estimate the sampling level. PMID:25821847

Stable isotope labeling tandem mass spectrometry (SILT) to quantify protein production and clearance rates

PubMed Central

Bateman, Randall J.; Munsell, Ling Y.; Chen, Xianghong; Holtzman, David M.; Yarasheski, Kevin E.

2007-01-01

In all biological systems, protein amount is a function of the rate of production and clearance. The speed of a response to a disturbance in protein homeostasis is determined by turnover rate. Quantifying alterations in protein synthesis and clearance rates is vital to understanding disease pathogenesis (e.g., aging, inflammation). No methods exist for quantifying production and clearance rates of low abundance (femtomole) proteins in vivo. We describe a novel, mass spectrometry-based method for quantitating low abundance protein synthesis and clearance rates in vitro and in vivo in animals and humans. The utility of this method is demonstrated with amyloid-beta (Aß), an important low abundance protein involved in Alzheimer's disease pathogenesis. We used in vivo stable isotope labeling, immunoprecipitation of Aß from cerebrospinal fluid, and quantitative liquid chromatography electrospray-ionization tandem mass spectrometry (LC-ESI-tandem MS) to quantify human Aß protein production and clearance rates. The method is sensitive and specific for stable isotope labeled amino acid incorporation into CNS (± 1% accuracy). This in vivo method can be used to identify pathophysiologic changes in protein metabolism; and may serve as a biomarker for monitoring disease risk, progression, or response to novel therapeutic agents. The technique is adaptable to other macromolecules, such as carbohydrates or lipids. PMID:17383190

Computer vision challenges and technologies for agile manufacturing

NASA Astrophysics Data System (ADS)

Molley, Perry A.

1996-02-01

Sandia National Laboratories, a Department of Energy laboratory, is responsible for maintaining the safety, security, reliability, and availability of the nuclear weapons stockpile for the United States. Because of the changing national and global political climates and inevitable budget cuts, Sandia is changing the methods and processes it has traditionally used in the product realization cycle for weapon components. Because of the increasing age of the nuclear stockpile, it is certain that the reliability of these weapons will degrade with time unless eventual action is taken to repair, requalify, or renew them. Furthermore, due to the downsizing of the DOE weapons production sites and loss of technical personnel, the new product realization process is being focused on developing and deploying advanced automation technologies in order to maintain the capability for producing new components. The goal of Sandia's technology development program is to create a product realization environment that is cost effective, has improved quality and reduced cycle time for small lot sizes. The new environment will rely less on the expertise of humans and more on intelligent systems and automation to perform the production processes. The systems will be robust in order to provide maximum flexibility and responsiveness for rapidly changing component or product mixes. An integrated enterprise will allow ready access to and use of information for effective and efficient product and process design. Concurrent engineering methods will allow a speedup of the product realization cycle, reduce costs, and dramatically lessen the dependency on creating and testing physical prototypes. Virtual manufacturing will allow production processes to be designed, integrated, and programed off-line before a piece of hardware ever moves. The overriding goal is to be able to build a large variety of new weapons parts on short notice. Many of these technologies that are being developed are also applicable to commercial production processes and applications. Computer vision will play a critical role in the new agile production environment for automation of processes such as inspection, assembly, welding, material dispensing and other process control tasks. Although there are many academic and commercial solutions that have been developed, none have had widespread adoption considering the huge potential number of applications that could benefit from this technology. The reason for this slow adoption is that the advantages of computer vision for automation can be a double-edged sword. The benefits can be lost if the vision system requires an inordinate amount of time for reprogramming by a skilled operator to account for different parts, changes in lighting conditions, background clutter, changes in optics, etc. Commercially available solutions typically require an operator to manually program the vision system with features used for the recognition. In a recent survey, we asked a number of commercial manufacturers and machine vision companies the question, 'What prevents machine vision systems from being more useful in factories?' The number one (and unanimous) response was that vision systems require too much skill to set up and program to be cost effective.

Green Toxicology-Know Early About and Avoid Toxic Product Liabilities.

PubMed

Maertens, Alexandra; Hartung, Thomas

2018-02-01

Toxicology uniquely among the life sciences relies largely on methods which are more than 40-years old. Over the last 3 decades with more or less success some additions to and few replacements in this toolbox took place, mainly as alternatives to animal testing. The acceptance of such new approaches faces the needs of formal validation and the conservative attitude toward change in safety assessments. Only recently, there is growing awareness that the same alternative methods, especially in silico and in vitro tools can also much earlier and before validation inform decision-taking in the product life cycle. As similar thoughts developed in the context of Green Chemistry, the term of Green Toxicology was coined to describe this change in approach. Here, the current developments in the alternative field, especially computational and more organo-typic cell cultures are reviewed, as they lend themselves to front-loaded chemical safety assessments. The initiatives of the Center for Alternatives to Animal Testing Green Toxicology Collaboration are presented. They aim first of all for forming a community to promote this concept and then for a cultural change in companies with the necessary training of chemists, product stewards and later regulators. © The Author 2017. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

A shortest-path graph kernel for estimating gene product semantic similarity.

PubMed

Alvarez, Marco A; Qi, Xiaojun; Yan, Changhui

2011-07-29

Existing methods for calculating semantic similarity between gene products using the Gene Ontology (GO) often rely on external resources, which are not part of the ontology. Consequently, changes in these external resources like biased term distribution caused by shifting of hot research topics, will affect the calculation of semantic similarity. One way to avoid this problem is to use semantic methods that are "intrinsic" to the ontology, i.e. independent of external knowledge. We present a shortest-path graph kernel (spgk) method that relies exclusively on the GO and its structure. In spgk, a gene product is represented by an induced subgraph of the GO, which consists of all the GO terms annotating it. Then a shortest-path graph kernel is used to compute the similarity between two graphs. In a comprehensive evaluation using a benchmark dataset, spgk compares favorably with other methods that depend on external resources. Compared with simUI, a method that is also intrinsic to GO, spgk achieves slightly better results on the benchmark dataset. Statistical tests show that the improvement is significant when the resolution and EC similarity correlation coefficient are used to measure the performance, but is insignificant when the Pfam similarity correlation coefficient is used. Spgk uses a graph kernel method in polynomial time to exploit the structure of the GO to calculate semantic similarity between gene products. It provides an alternative to both methods that use external resources and "intrinsic" methods with comparable performance.

Monitoring urban land cover change by updating the national land cover database impervious surface products

USGS Publications Warehouse

Xian, George Z.; Homer, Collin G.

2009-01-01

The U.S. Geological Survey (USGS) National Land Cover Database (NLCD) 2001 is widely used as a baseline for national land cover and impervious conditions. To ensure timely and relevant data, it is important to update this base to a more recent time period. A prototype method was developed to update the land cover and impervious surface by individual Landsat path and row. This method updates NLCD 2001 to a nominal date of 2006 by using both Landsat imagery and data from NLCD 2001 as the baseline. Pairs of Landsat scenes in the same season from both 2001 and 2006 were acquired according to satellite paths and rows and normalized to allow calculation of change vectors between the two dates. Conservative thresholds based on Anderson Level I land cover classes were used to segregate the change vectors and determine areas of change and no-change. Once change areas had been identified, impervious surface was estimated for areas of change by sampling from NLCD 2001 in unchanged areas. Methods were developed and tested across five Landsat path/row study sites that contain a variety of metropolitan areas. Results from the five study areas show that the vast majority of impervious surface changes associated with urban developments were accurately captured and updated. The approach optimizes mapping efficiency and can provide users a flexible method to generate updated impervious surface at national and regional scales.

Engineering cyanobacteria to generate high-value products.

PubMed

Ducat, Daniel C; Way, Jeffrey C; Silver, Pamela A

2011-02-01

Although many microorganisms have been used for the bioindustrial generation of valuable metabolites, the productive potential of cyanobacterial species has remained largely unexplored. Cyanobacteria possess several advantages as organisms for bioindustrial processes, including simple input requirements, tolerance of marginal agricultural environments, rapid genetics, and carbon-neutral applications that could be leveraged to address global climate change concerns. Here, we review recent research involving the engineering of cyanobacterial species for the production of valuable bioindustrial compounds, including natural cyanobacterial products (e.g. sugars and isoprene), biofuels (e.g. alcohols, alkanes and hydrogen), and other commodity chemicals. Biological and economic obstacles to scaled cyanobacterial production are highlighted, and methods for increasing cyanobacterial production efficiencies are discussed. Copyright © 2010 Elsevier Ltd. All rights reserved.

76 FR 80312 - Periodic Reporting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... establishing a docket to consider new measurement of Flats Sequencing Systems operations, a change in the... Mail cost model in periodic reporting of service performance measurement. Establishing this docket will...: proposed productivity measurement for Flats Sequencing System. Proposal Sixteen introduces a new method for...

21 CFR 820.70 - Production and process controls.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to ensure that a device conforms to its specifications. Where deviations from device specifications... specifications. Where process controls are needed they shall include: (1) Documented instructions, standard... establish and maintain procedures for changes to a specification, method, process, or procedure. Such...

21 CFR 820.70 - Production and process controls.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to ensure that a device conforms to its specifications. Where deviations from device specifications... specifications. Where process controls are needed they shall include: (1) Documented instructions, standard... establish and maintain procedures for changes to a specification, method, process, or procedure. Such...

The Business of Co-Production: Assessing Efforts to Bridge Science and Decision-Making for Adaptation in California

NASA Astrophysics Data System (ADS)

Webber, S.; MacDonald, G. M.

2016-12-01

The last decades have seen scholars argue for a greater integration of science and decision-making in order to more effectively respond to climate change. It has been suggested that overcoming the gap between science, on the one hand, and policy-making and management, on the other, requires building bridges through methods of co-production, creating actionable science, or through boundary organizations. In this paper, we review attempts at co-production for policy-making and management in the context of climate change adaptation in California. Building on field research, including numerous interviews conducted with scientists and decision-makers who are co-producers of adaptation projects, we make three arguments. First, we show that an emphasis on co-production and science-informed climate change adaptation decision-making has bolstered a contract-oriented, and decentralized network-based model of producing climate science. Second, reviewing successes and failures in co-production - as reported in interviews - indicates that it is principally in cases of neatly defined, and spatially and temporarily narrow decision-making contexts, and with highly motivated decision-makers, that climate science is used. Finally, we suggest that the ideas of co-production and actionable science may have increased the institutional and organizational burden at the science-decision interface, lengthening the boundary-organization-chain rather than necessarily facilitating adaptive policy-making and management.

Life cycle assessment of cheese production process in a small-sized dairy industry in Brazil.

PubMed

Santos, Hudson Carlos Maia; Maranduba, Henrique Leonardo; de Almeida Neto, José Adolfo; Rodrigues, Luciano Brito

2017-02-01

Current research identifies, analyzes, and suggests improvements for minimizing environmental impacts in the manufacture of cheese using the life cycle assessment. Data collection and development of the inventory were performed in a small-sized dairy industry in Brazil. A cradle-to-gate approach was conducted based on the primary data from cheese production and secondary data from databases. The ReCiPe method was used for the impact assessment, considering the categories climate change, ozone depletion, terrestrial acidification, freshwater eutrophication, photochemical oxidant formation, particulate matter formation, water depletion, and fossil depletion. A sensitivity analysis was performed including evaluations of different fuels for generating thermal energy, strategies for cleaning of dairy plant and utensils, variations in the way of cheese production based on the fat content, and production percentage changes. The results showed that the skimmed milk and thermal energy productions, electricity usage, and water consumptions were the main elementary flows. The pallet residues showed the best to be used as fuel for thermal energy. Detergent combinations did not influence the impact categories. There was a direct relationship between fat content range (20 to 30%) and the contribution in six impact categories. Changes from 20% in cheese allocation factor influenced the impact assessment results. LCA allowed identifying the main elementary flow of cheese production, providing valuable information with the potential to verify opportunities for on-site improvements.

The impact of a prospective survey-based workplace intervention program on employee health, biologic stress markers, and organizational productivity.

PubMed

Anderzén, Ingrid; Arnetz, Bengt B

2005-07-01

To study whether knowledge about psychosocial work indicators and a structured method to implement changes based on such knowledge comprise an effective management tool for enhancing organizational as well as employee health and well-being. White- collar employees representing 22 different work units were assessed before and after a 1-year intervention program. Subjective ratings on health and work environment, biologic markers, absenteeism, and productivity were measured. Significant improvements in performance feedback, participatory management, employeeship, skills development, efficiency, leadership, employee well-being, and work-related exhaustion were identified. The restorative hormone testosterone increased during the intervention and changes correlated with increased overall organizational well-being. Absenteeism decreased and productivity improved. Fact-based psychosocial workplace interventions are suggested to be an important process for enhancing employee well-being as well as organizational performance.

Regional and longitudinal estimation of product lifespan distribution: a case study for automobiles and a simplified estimation method.

PubMed

Oguchi, Masahiro; Fuse, Masaaki

2015-02-03

Product lifespan estimates are important information for understanding progress toward sustainable consumption and estimating the stocks and end-of-life flows of products. Publications reported actual lifespan of products; however, quantitative data are still limited for many countries and years. This study presents regional and longitudinal estimation of lifespan distribution of consumer durables, taking passenger cars as an example, and proposes a simplified method for estimating product lifespan distribution. We estimated lifespan distribution parameters for 17 countries based on the age profile of in-use cars. Sensitivity analysis demonstrated that the shape parameter of the lifespan distribution can be replaced by a constant value for all the countries and years. This enabled a simplified estimation that does not require detailed data on the age profile. Applying the simplified method, we estimated the trend in average lifespans of passenger cars from 2000 to 2009 for 20 countries. Average lifespan differed greatly between countries (9-23 years) and was increasing in many countries. This suggests consumer behavior differs greatly among countries and has changed over time, even in developed countries. The results suggest that inappropriate assumptions of average lifespan may cause significant inaccuracy in estimating the stocks and end-of-life flows of products.

Single well productivity prediction of carbonate reservoir

NASA Astrophysics Data System (ADS)

Le, Xu

2018-06-01

It is very important to predict the single-well productivity for the development of oilfields. The fracture structure of carbonate fractured-cavity reservoirs is complex, and the change of single-well productivity is inconsistent with that of sandstone reservoir. Therefore, the establishment of carbonate oil well productivity It is very important. Based on reservoir reality, three different methods for predicting the productivity of carbonate reservoirs have been established based on different types of reservoirs. (1) To qualitatively analyze the single-well capacity relations corresponding to different reservoir types, predict the production capacity according to the different wells encountered by single well; (2) Predict the productivity of carbonate reservoir wells by using numerical simulation technology; (3) According to the historical production data of oil well, fit the relevant capacity formula and make single-well productivity prediction; (4) Predict the production capacity by using oil well productivity formula of carbonate reservoir.

Stimulation Of The Methane Production With The Use Of Changing Of The Rock Massif Physical Conditions

NASA Astrophysics Data System (ADS)

Baev, Mikhail; Khyamyalyaynen, Veniamin; Shevtsov, Aleksandr

2017-11-01

The commercial coalbed methane production success is majorly defined by the effectiveness of the use of special gas inflow stimulation methods. The necessity of using of such methods issubject to the aspects of searching and displacement of methane within the coal compound. Theanalysis of the ways of methane production stimulation from virgin coal formations is given. The description of the process of hydraulic fracturing (fracturing) as the most common stimulation method during the commercial coalbed methane production as well as its major advantages are presented. The present work provides data about the initiated laboratory research of sands collected from Kemerovo region deposits for the purpose of finding of the most prospective samples by means of anchoring of fractures. The prospectivity and ability to implement the hydraulic fracturing with the use of locally available sands acting as proppants are shown. The influence of the strain-stress state of the rock massif on the alteration of permeability and the necessity of its extension study with respect to different technological features of hydraulic fracturing is shown

RNActive® Technology: Generation and Testing of Stable and Immunogenic mRNA Vaccines.

PubMed

Rauch, Susanne; Lutz, Johannes; Kowalczyk, Aleksandra; Schlake, Thomas; Heidenreich, Regina

2017-01-01

Developing effective mRNA vaccines poses certain challenges concerning mRNA stability and ability to induce sufficient immune stimulation and requires a specific panel of techniques for production and testing. Here, we describe the production of stabilized mRNA with enhanced immunogenicity, generated using conventional nucleotides only, by introducing changes to the mRNA sequence and by complexation with the nucleotide-binding peptide protamine (RNActive® technology). Methods described here include the synthesis, purification, and protamine complexation of mRNA vaccines as well as a comprehensive panel of in vitro and in vivo methods for evaluation of vaccine quality and immunogenicity.

Is it photosensitization or photodegradation when UV-B irradiation is combined with BDE-47? Evidence from the growth and reproduction changes of rotifer Brachionus plicatilis.

PubMed

Liu, Chunchen; Tang, Xuexi; Zhou, Bin; Jiang, Yongshun; Lv, Mengchen; Zang, Yu; Wang, You

2018-07-01

Ecotoxicological methods were applied in the present study, and the marine rotifer Brachionus plicatilis was used as the toxic endpoint to depict what occurred when 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) was combined with solar ultraviolet-B radiation (UV-B). B. plicatilis was exposed to three different combination methods of BDE-47 and UV-B at an equal toxicity ratio, including normal rotifer co-cultured with UV-B-irradiated BDE-47 (known as Method I), UV-B-irradiated rotifer co-cultured with BDE-47 exposure (known as Method II) and normal rotifer co-cultured with the simultaneous addition of BDE-47 and UV-B irradiation (known as Method III). Acute and chronic experiments were preformed to determine the toxicity differentiation according to the growth and reproduction changes in the rotifer. Twenty-four-hour acute experiments showed that the modes of three combined methods changed from antagonism to additive, to synergistic with the concentration/dose increment, and the contribution rates of Method I and Method II to Method III were calculated by approximately 40.4% and 59.6%, respectively. Chronic exposure to either the single stressor or the combination of stressors inhibited the growth and reproduction of the rotifer, demonstrating the inhibition of the population growth rate and the decrease in the larvae production. Three combined groups presented more serious damages compared to groups with single stress exposure, and the ascending sequence of toxicity was Method I

Optimization of the method of the content-containing interaction evaluation for cosmetic products by gas chromatography - mass spectrometry.

PubMed

Charron, C; De Vaugelade, S; Richard, F; Largitte, A; Pirnay, S

2018-04-25

Nowadays, plastics are ubiquitous in our daily life. Most of materials used in cosmetic packaging are plastics. It is due to their great diversity of form and colour, their low cost and their easy production. The manufacture of plastic packaging requires the use of several additives such as plasticizers. These molecules are able to migrate from the packaging to the product [1] and can change the product composition, his properties and be harmful to the consumer health. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

The future in Agricultural Engineering: news degrees in the Universidad Politécnica de Madrid (UPM)

NASA Astrophysics Data System (ADS)

Cartagena, M. Carmen; Tarquis, A. M.; Vázquez, J.; Serrano, A.; Arce, A.

2010-05-01

The Bologna process is to improve the quality of education, mobility, diversity and the competitiveness and involves three fundamental changes: transform of the structure of titles, changing in methods of teaching and implementation of the systems of quality assurance. Engineer Agronomist at the Universidad Politécnica de Madrid (UPM) has been offered as a degree of five years with a total of 400 credits and seven optional orientations: Crop Production, Plant and Breeding Protection, Environment, Agricultural Economics, Animal Production, Rural Engineering and Food Technology. Actually, the Bologna plan creates three new degrees: Engineering and Science Agronomic, Food Engineering and Agro-Environmental Engineering, with 240 ECTS each one of them and with specific professional characteristics. The changes that involve the introduction of these new degrees is perhaps the largest occurred never at the Spanish university system, not only by the drastic transformation in the structure of titles, but also by the new changes that lie ahead in teaching methods. Among others we will comment the following ones: -A year decreased duration of studies and therefore incorporation into the market. - Elimination of the seven current guidelines to create three specific qualifications of degree. -Decrease of optional subjects and increase in credits for the basic subjects. - Inclusion of business practices. - Increase in the number of credits of final project. - Changes in methodologies and a higher involvement of teachers and students in the education.

Proceedings of the Symposium on Psychology in the Department of Defense (11th) Held in Colorado Springs, Colorado on 13-15 April 1988

DTIC Science & Technology

1988-04-15

participatory methods and organization-wide change. This program appears to be well managed by those who understand and accept the strategies and values of...many alternative management strategies , including participatory approaches, to improve product quality, productivity, and quality of work life (Brown...PRESENT, AND FUTJRE" Leslie Wilson Mickey Dansby Dan Landis Defense Equal Opportunity Management Institute ........ ....................... ... 54

Testing actinide fission yield treatment in CINDER90 for use in MCNP6 burnup calculations

DOE PAGES

Fensin, Michael Lorne; Umbel, Marissa

2015-09-18

Most of the development of the MCNPX/6 burnup capability focused on features that were applied to the Boltzman transport or used to prepare coefficients for use in CINDER90, with little change to CINDER90 or the CINDER90 data. Though a scheme exists for best solving the coupled Boltzman and Bateman equations, the most significant approximation is that the employed nuclear data are correct and complete. Thus, the CINDER90 library file contains 60 different actinide fission yields encompassing 36 fissionable actinides (thermal, fast, high energy and spontaneous fission). Fission reaction data exists for more than 60 actinides and as a result, fissionmore » yield data must be approximated for actinides that do not possess fission yield information. Several types of approximations are used for estimating fission yields for actinides which do not possess explicit fission yield data. The objective of this study is to test whether or not certain approximations of fission yield selection have any impact on predictability of major actinides and fission products. Further we assess which other fission products, available in MCNP6 Tier 3, result in the largest difference in production. Because the CINDER90 library file is in ASCII format and therefore easily amendable, we assess reasons for choosing, as well as compare actinide and major fission product prediction for the H. B. Robinson benchmark for, three separate fission yield selection methods: (1) the current CINDER90 library file method (Base); (2) the element method (Element); and (3) the isobar method (Isobar). Results show that the three methods tested result in similar prediction of major actinides, Tc-99 and Cs-137; however, certain fission products resulted in significantly different production depending on the method of choice.« less

Effect of weathering cycle and manufacturing method on performance of wood flour and high-density polyethylene composites

Treesearch

Nicole M. Stark

2006-01-01

Wood–plastic lumber is promoted as a low-maintenance high-durability product. When exposed to accelerated weathering, however, wood–plastic composites may experience a color change and loss in mechanical properties. Differences in weathering cycle and composite surface characteristics can affect the rate and amount of change caused by weathering. In this study, 50%...

New York City flavoured tobacco product sales ban evaluation.

PubMed

Farley, Shannon M; Johns, Michael

2017-01-01

The availability of flavoured tobacco products is associated with increased initiation and youth smoking. New York City prohibited all sales of flavoured cigars, cigarillos, little cigars, chew, snuff, snus, tobacco, pipe tobacco, roll-your-own tobacco, and dissolvables, excluding menthol, in October 2009; enforcement began in November 2010. This paper describes the sales ban evaluation. Data on retail tobacco sales of cigars, smokeless and other tobacco products such as pipe tobacco and roll-your-own, were analysed using interrupted time series methods, estimating changes in flavoured and non-flavoured tobacco product inflation-adjusted dollar sales overall, and by product type. Changes in ever use of flavoured tobacco products, any tobacco product use, and smoking prevalence among adolescents were estimated using multivariable logistic regression. Sales of flavoured tobacco products declined overall (87%; p<0.001), and for flavoured cigars (86%; p<0.001) and flavoured pipe and roll-your-own (91%; p<0.001) following ban enforcement, while non-flavoured sales increased for cigars (5%; p=0.003) and pipe and roll-your-own (4%, p=0.030). In adjusted models, teens in 2013 had 37% lower odds of ever trying flavoured tobacco products (p<0.001), 28% lower odds of using any type of tobacco product (p=0.025), and a non-significant change in current smoking prevalence (p=0.114) compared with teens in 2010. Flavoured tobacco product sales and odds of ever using flavoured tobacco products or using any tobacco products among teens declined significantly after ban enforcement began. Collectively these findings demonstrate significant evidence that the flavoured tobacco products sales ban was successful in New York City, and could succeed elsewhere. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Using Electrophysiological Measures to Assess the Consumer Acceptability of Smokeless Tobacco Products.

PubMed

Buzzell, George A; Das, Babita; Cruz-Cano, Raul; Nkongho, Lizette E; Kidanu, Azieb W; Kim, Hyoshin; Clark, Pamela I; McDonald, Craig G

2016-09-01

Adequate evaluation of novel tobacco products must include investigation of consumers' psychological response to such products. Traditionally, subjective scales of product liking have been used to assess consumer acceptability of tobacco products. However, subjective scales may miss cognitive changes that can only be captured by direct neurophysiological assessment. The present investigation explored the viability of using electroencephalography (EEG), in combination with traditional subjective measures, to assess consumer acceptability of five smokeless tobacco products. Given previous work linking product liking to arousal/attentional (executive function) enhancement, we focused on EEG measures of attention/arousal to objectively characterize cognitive changes associated with tobacco product use. During five separate laboratory visits, smokeless tobacco users used Verve discs, Ariva dissolvables, Skoal snuff, Camel snus, or Nicorette lozenges. The N2 and P3b event-related potential components elicited by an oddball task were used to index attentional changes before/after product usage. Additionally, resting state alpha band EEG activity was analyzed before/after product usage to index cortical arousal. Although analyses of the subjective results provided limited inference, analyses of the electrophysiological measures, particularly the alpha suppression measure, revealed robust differences between products. Skoal elicited significantly enhanced alpha suppression compared to all four other products tested. Additionally, alpha suppression was found to correlate positively with subjective measures of satisfaction and psychological reward, but was unrelated to perceived aversion. The present results provide evidence that electrophysiological measures can yield important insights into consumer acceptability of novel tobacco products and are a valuable complement to subjective measures. This study is the first to employ a combination of electrophysiological measures and traditional subjective assays in order to assess the consumer acceptability of smokeless tobacco products. The results highlight the importance of adopting a multidimensional/multi-method approach to studying the consumer acceptability of tobacco products. © The Author 2016. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

a Study for Remote Detection of Industrial Effluents' Effect on Rice Using Thermal Images

NASA Astrophysics Data System (ADS)

Dehnavi, S.; Abkar, A. A.; Maghsoudi, Y.; Dehnavi, E.

2015-12-01

Rice is one of the most important nutritious grains all over the world, so that only in some parts of Asia more than 300 million acres allocated for cultivating this product. Therefore, qualitative and quantitative management of this product is of great importance in commercial, political and financial viewpoints. Rice plant is very influenced by physical and chemical characteristics of irrigation water, due to its specific kind of planting method. Hence, chemically-polluted waters which received by plant can change in live plants and their products. Thus, a very high degree of treatment will be required if the effluent discharges to rice plants. Current waters receive a variety of land-based water pollutants ranging from industrial wastes to excess sediments. One of the most hazardous wastes are chemicals that are toxic. Some factories discharge their effluents directly into a water body. So, what would happen for rice plant or its product if this polluted water flow to paddies? Is there any remotely-based method to study for this effect? Are surface temperature distributions (thermal images) useful in this context? The first goal in this research is thus to investigate the effect of a simulated textile factory's effluent sample on the rice product. The second goal is to investigate whether the polluted plant can be identified by means of thermal remote sensing or not. The results of this laboratory research have proven that the presence of industrial wastewater cause a decrease in plant's product and its f-cover value, also some changes in radiant temperature.

The need for agriculture phenotyping: "moving from genotype to phenotype".

PubMed

Boggess, Mark V; Lippolis, John D; Hurkman, William J; Fagerquist, Clifton K; Briggs, Steve P; Gomes, Aldrin V; Righetti, Pier Giorgio; Bala, Kumar

2013-11-20

Increase in the world population has called for the increased demand for agricultural productivity. Traditional methods to augment crop and animal production are facing exacerbating pressures in keeping up with population growth. This challenge has in turn led to the transformational change in the use of biotechnology tools to meet increased productivity for both plant and animal systems. Although many challenges exist, the use of proteomic techniques to understand agricultural problems is steadily increasing. This review discusses the impact of genomics, proteomics, metabolomics and phenotypes on plant, animal and bacterial systems to achieve global food security and safety and we highlight examples of intra and extra mural research work that is currently being done to increase agricultural productivity. This review focuses on the global demand for increased agricultural productivity arising from population growth and how we can address this challenge using biotechnology. With a population well above seven billion humans, in a very unbalanced nutritional state (20% overweight, 20% risking starvation) drastic measures have to be taken at the political, infrastructure and scientific levels. While we cannot influence politics, it is our duty as scientists to see what can be done to feed humanity. Hence we highlight the transformational change in the use of biotechnology tools over traditional methods to increase agricultural productivity (plant and animal). Specifically, this review deals at length on how a three-pronged attack, namely combined genomics, proteomics and metabolomics, can help to ensure global food security and safety. This article is part of a Special Issue entitled: Translational Plant Proteomics. Copyright © 2013 Elsevier B.V. All rights reserved.

Development of an in vitro photosafety evaluation method utilizing intracellular ROS production in THP-1 cells.

PubMed

Toyoda, Akemi; Itagaki, Hiroshi

2018-01-01

Photoreactive compounds that may experience exposure to ultraviolet (UV) radiation can lead to the intracellular production of reactive oxygen species (ROS), which may cause phototoxic and photoallergenic responses. Here, we developed a novel in vitro photosafety assay and investigated whether it could be used to predict phototoxicity and photosensitivity by measuring changes in intracellular ROS production. THP-1 cells that had previously taken up 5-(and-6)-carboxy-2',7'-difluorodihydrofluorescein diacetate (carboxy-H 2 DFFDA), a ROS-sensitive fluorescent reagent, were exposed to photoreactive substances such as phototoxic and photoallergenic materials and then subjected to with UV-A irradiation (5 J/cm 2 ). The fluorescence intensity was subsequently measured using a flow cytometer, and the intracellular ROS production was calculated. A statistically significant increase in ROS following treatment with photoreactive substances was observed in cells irradiated with UV-A. In contrast, no significant increase was observed for non-photoreactive substances in comparison to the control solution. Next, to confirm the impact of intracellular ROS on the photosensitive response, changes in CD86 and CD54 expression were measured following quencher addition during the photo human cell line activation test (photo h-CLAT). The results confirmed the reduction of CD86 and CD54 expression in response to photoallergenic substances following quencher addition. Together, these findings suggest that intracellular ROS production is involved in photosensitizing reactions. Therefore, we suggest that the developed method utilizing intracellular ROS production as an index may be useful as a novel in vitro evaluation tool for photoreactive substances.

The limit of irrigation adaption due to the inter-crop conflict of water use under changing climate and landuse

NASA Astrophysics Data System (ADS)

Okada, M.; Iizumi, T.; Sakamoto, T.; Kotoku, M.; Sakurai, G.; Nishimori, M.

2017-12-01

Replacing rainfed cropping system by irrigated one is assumed to be an effective measure for climate change adaptation in agriculture. However, in many agricultural impact assessments, future irrigation scenarios are externally given and do not consider variations in the availability of irrigation water under changing climate and land use. Therefore, we assess the potential effects of adaption measure expanding irrigated area under climate change by using a large-scale crop-river coupled model, CROVER [Okada et al. 2015, JAMES]. The CROVER model simulates the large-scale terrestrial hydrological cycle and crop growth depending on climate, soil properties, landuse, crop cultivation management, socio-economic water demand, and reservoir operation management. The bias-corrected GCMs outputs under the RCP 8.5 scenario were used. The future expansion of irrigation area was estimated by using the extrapolation method based on the historical change in irrigated and rainfed areas. As the results, the irrigation adaptation has only a limited effect on the rice production in East Asia due to the conflict of water use for irrigation with the other crops, whose farmlands require unsustainable water extraction with the excessively expanding irrigated area. In contrast, the irrigation adaptation benefits maize production in Europe due to the little conflict of water use for irrigation. Our findings suggest the importance of simulating the river water availability and crop production in a single model for the more realistic assessment in the irrigation adaptation potential effects of crop production under changing climate and land use.

Lyophilization and Reconstitution of Reverse Osmosis Concentrated Natural Organic Matter

EPA Science Inventory

Disinfection by-product (DBP) research can be complicated by difficulties in shipping large water quantities and changing natural organic matter (NOM) characteristics over time. To overcome these issues, it is advantageous to have a reliable method for concentrating and preservin...

Methods to address poultry robustness and welfare issues through breeding and associated ethical considerations

USDA-ARS?s Scientific Manuscript database

Management practices and rearing conditions employed for domestic animal production including laying hens are continusly changing based on ethical and scientific results. This presents challenges especially regarding managing competitive social interactions (social stress) between animals. Selective...

Auto-Versioning Systems Image Manager

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pezzaglia, Larry

2013-08-01

The av_sys_image_mgr utility provides an interface for the creation, manipulation, and analysis of system boot images for computer systems. It is primarily intended to provide a convenient method for managing the introduction of changes to boot images for long-lived production HPC systems.

Climate Change for Agriculture, Forest Cover and 3d Urban Models

NASA Astrophysics Data System (ADS)

Kapoor, M.; Bassir, D.

2014-11-01

This research demonstrates the important role of the remote sensing in finding out the different parameters behind the agricultural crop change, forest cover and urban 3D models. Standalone software is developed to view and analysis the different factors effecting the change in crop productions. Open-source libraries from the Open Source Geospatial Foundation have been used for the development of the shape-file viewer. Software can be used to get the attribute information, scale, zoom in/out and pan the shapefiles. Environmental changes due to pollution and population that are increasing the urbanisation and decreasing the forest cover on the earth. Satellite imagery such as Landsat 5(1984) to Landsat TRIS/8 (2014), Landsat Data Continuity Mission (LDCM) and NDVI are used to analyse the different parameters that are effecting the agricultural crop production change and forest change. It is advisable for the development of good quality of NDVI and forest cover maps to use data collected from the same processing methods for the complete region. Management practices have been developed from the analysed data for the betterment of the crop and saving the forest cover

Trenton Biogas LLC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blair, William Brian

During the total period of funding, the project objectives changed. The initial objective of the project was to research the health and efficacy of two commercial derivative products of levulinic acid extracted from food waste and to optimize conversion methods for manufacturing. Unfortunately, and prior to any final conclusions, the scientist performing the studies passed away leaving much of the work incomplete. Analysis of the initial work product suggested that the process for commercializing levulinic acid from the food waste product was cost prohibitive mostly due to the market readiness for the levulinic acid product. The second phase of fundingmore » research period focused on utilizing the food waste (which had already been researched from phase 1) for other sources of energy. The focus and objectives of this phase were more focused on the technology transfer necessary to commercialize anaerobic digestion of food waste in a somewhat urban environment. During this transition, the project name changed from Trenton Fuel Works to Trenton Biogas.« less

Monitoring change in mountainous dry-heath vegetation at a regional scale using multitemporal Landsat TM data.

PubMed

Nordberg, Maj-Liz; Evertson, Joakim

2003-12-01

Vegetation cover-change analysis requires selection of an appropriate set of variables for measuring and characterizing change. Satellite sensors like Landsat TM offer the advantages of wide spatial coverage while providing land-cover information. This facilitates the monitoring of surface processes. This study discusses change detection in mountainous dry-heath communities in Jämtland County, Sweden, using satellite data. Landsat-5 TM and Landsat-7 ETM+ data from 1984, 1994 and 2000, respectively, were used. Different change detection methods were compared after the images had been radiometrically normalized, georeferenced and corrected for topographic effects. For detection of the classes change--no change the NDVI image differencing method was the most accurate with an overall accuracy of 94% (K = 0.87). Additional change information was extracted from an alternative method called NDVI regression analysis and vegetation change in 3 categories within mountainous dry-heath communities were detected. By applying a fuzzy set thresholding technique the overall accuracy was improved from of 65% (K = 0.45) to 74% (K = 0.59). The methods used generate a change product showing the location of changed areas in sensitive mountainous heath communities, and it also indicates the extent of the change (high, moderate and unchanged vegetation cover decrease). A total of 17% of the dry and extremely dry-heath vegetation within the study area has changed between 1984 and 2000. On average 4% of the studied heath communities have been classified as high change, i.e. have experienced "high vegetation cover decrease" during the period. The results show that the low alpine zone of the southern part of the study area shows the highest amount of "high vegetation cover decrease". The results also show that the main change occurred between 1994 and 2000.

Statistical downscaling of daily precipitation over Llobregat river basin in Catalonia (Spain) using three downscaling methods.

NASA Astrophysics Data System (ADS)

Ballinas, R.; Versini, P.-A.; Sempere, D.; Escaler, I.

2009-09-01

Any long-term change in the patterns of average weather in a global or regional scale is called climate change. It may cause a progressive increase of atmospheric temperature and consequently may change the amount, frequency and intensity of precipitation. All these changes of meteorological parameters may modify the water cycle: run-off, infiltration, aquifer recharge, etc. Recent studies in Catalonia foresee changes in hydrological systems caused by climate change. This will lead to alterations in the hydrological cycle that could impact in land use, in the regimen of water extractions, in the hydrological characteristics of the territory and reduced groundwater recharge. Besides, can expect a loss of flow in rivers. In addition to possible increases in the frequency of extreme rainfall, being necessary to modify the design of infrastructure. Because this, it work focuses on studying the impacts of climate change in one of the most important basins in Catalonia, the Llobregat River Basin. The basin is the hub of the province of Barcelona. It is a highly populated and urbanized catchment, where water resources are used for different purposes, as drinking water production, agricultural irrigation, industry and hydro-electrical energy production. In consequence, many companies and communities depend on these resources. To study the impact of climate change in the Llobregat basin, storms (frequency, intensity) mainly, we will need regional climate change information. A regional climate is determined by interactions at large, regional and local scales. The general circulation models (GCMs) are run at too coarse resolution to permit accurate description of these regional and local interactions. So far, they have been unable to provide consistent estimates of climate change on a local scale. Several regionalization techniques have been developed to bridge the gap between the large-scale information provided by GCMs and fine spatial scales required for regional and environmental impact studies. Downscaling methods to assess the effect of large-scale circulations on local parameters have. Statistical downscaling methods are based on the view that regional climate can be conditioned by two factors: large-scale climatic state and regional/local features. Local climate information is derived by first developing a statistical model which relates large-scale variables or "predictors" for which GCMs are trustable to regional or local surface "predictands" for which models are less skilful. The main advantage of these methods is that they are computationally inexpensive, and can be applied to outputs from different GCM experiments. Three statistical downscaling methods are applied: Analogue method, Delta Change and Direct Forcing. These methods have been used to determine daily precipitation projections at rain gauge location to study the intensity, frequency and variability of storms in a context of climate change in the Llobregat River Basin in Catalonia, Spain. This work is part of the European project "Water Change" (included in the LIFE + Environment Policy and Governance program). It deals with Medium and long term water resources modelling as a tool for planning and global change adaptation. Two stakeholders involved in the project provided the historical time series: Catalan Water Agency (ACA) and the State Meteorological Agency (AEMET).

Particulate-matter content of 11 cephalosporin injections: conformance with USP limits.

PubMed

Parkins, D A; Taylor, A J

1987-05-01

The particulate-matter content of 11 dry-powder cephalosporin injections was determined using a modified version of the official United States Pharmacopeial Convention (USP) method for particulate matter in small-volume injections (SVIs). Ten vials of each cephalosporin product were each constituted with 10 mL of Water for Injections BP that had been filtered through a 0.22-micron membrane. The pooled contents of the 10 vials for each product were allowed to stand under reduced pressure to ensure removal of gas bubbles. Particulate-matter content was determined using a HIAC/Royco particle counter on six 10-mL samples obtained from the pooled solutions for each product. All solution preparation and particle counting was performed in a horizontal-laminar-airflow hood. Modifications of the USP method used in this study included the use of six rather than two samples from each pooled solution, the addition of diluent to the injections through the rubber closure with a needle instead of into the open container, and changes in the degassing method. Particle counts for all products examined were lower than USP limits for SVIs. All but two products contained less than 15% of USP limits for particles greater than or equal to 10 microns in effective diameter and particles greater than or equal to 25 microns in effective diameter. The standard USP method for degassing (standing for two minutes) was inadequate. Application of reduced pressure for up to 10 minutes was necessary for thorough degassing of products.(ABSTRACT TRUNCATED AT 250 WORDS)

An Investigation of Automatic Change Detection for Topographic Map Updating

NASA Astrophysics Data System (ADS)

Duncan, P.; Smit, J.

2012-08-01

Changes to the landscape are constantly occurring and it is essential for geospatial and mapping organisations that these changes are regularly detected and captured, so that map databases can be updated to reflect the current status of the landscape. The Chief Directorate of National Geospatial Information (CD: NGI), South Africa's national mapping agency, currently relies on manual methods of detecting changes and capturing these changes. These manual methods are time consuming and labour intensive, and rely on the skills and interpretation of the operator. It is therefore necessary to move towards more automated methods in the production process at CD: NGI. The aim of this research is to do an investigation into a methodology for automatic or semi-automatic change detection for the purpose of updating topographic databases. The method investigated for detecting changes is through image classification as well as spatial analysis and is focussed on urban landscapes. The major data input into this study is high resolution aerial imagery and existing topographic vector data. Initial results indicate the traditional pixel-based image classification approaches are unsatisfactory for large scale land-use mapping and that object-orientated approaches hold more promise. Even in the instance of object-oriented image classification generalization of techniques on a broad-scale has provided inconsistent results. A solution may lie with a hybrid approach of pixel and object-oriented techniques.

Enhanced change detection index for disaster response, recovery assessment and monitoring of buildings and critical facilities-A case study for Muzzaffarabad, Pakistan

NASA Astrophysics Data System (ADS)

de Alwis Pitts, Dilkushi A.; So, Emily

2017-12-01

The availability of Very High Resolution (VHR) optical sensors and a growing image archive that is frequently updated, allows the use of change detection in post-disaster recovery and monitoring for robust and rapid results. The proposed semi-automated GIS object-based method uses readily available pre-disaster GIS data and adds existing knowledge into the processing to enhance change detection. It also allows targeting specific types of changes pertaining to similar man-made objects such as buildings and critical facilities. The change detection method is based on pre/post normalized index, gradient of intensity, texture and edge similarity filters within the object and a set of training data. More emphasis is put on the building edges to capture the structural damage in quantifying change after disaster. Once the change is quantified, based on training data, the method can be used automatically to detect change in order to observe recovery over time in potentially large areas. Analysis over time can also contribute to obtaining a full picture of the recovery and development after disaster, thereby giving managers a better understanding of productive management and recovery practices. The recovery and monitoring can be analyzed using the index in zones extending from to epicentre of disaster or administrative boundaries over time.

Analysis of charge transport in gels containing polyoxometallates using methods of different sensitivity to migration.

PubMed

Caban, Karolina; Lewera, Adam; Zukowska, Grazyna Z; Kulesza, Pawel J; Stojek, Zbigniew; Jeffrey, Kenneth R

2006-08-04

Two methods have been used for examination of transport of charge in gels soaked with DMF and containing dissolved polyoxometallates. The first method is based on the analysis of both Cottrellian and steady-state currents and therefore is capable of giving the concentration of the electroactive redox centres and their transport (diffusion-type) coefficient. The second method provides the real diffusion coefficients, i.e. transport coefficients free of migrational influence, for both the substrate and the product of the electrode reaction. Several gels based on poly(methyl methacrylate), with charged (addition of 1-acrylamido-2-methyl-2-propanesulphonic acid to the polymerization mixture) and uncharged chains, have been used in the investigation. The ratio obtained for the diffusion coefficient (second method) and transport coefficient (first method) was smaller for the gels containing charged polymer chains than for the gels with uncharged chains. In part these changes could be explained by the contribution of migration to the transport of polyoxomatallates in the gels. However, the impact of the changes in the polymer-channel capacity at the electrode surface while the electrode process proceeds was also considered. These structural changes should affect differently the methods based on different time domains.

Predicting future US water yield and ecosystem productivity by linking an ecohydrological model to WRF dynamically downscaled climate projections

NASA Astrophysics Data System (ADS)

Sun, S.; Sun, G.; Cohen, E.; McNulty, S. G.; Caldwell, P.; Duan, K.; Zhang, Y.

2015-12-01

Quantifying the potential impacts of climate change on water yield and ecosystem productivity (i.e., carbon balances) is essential to developing sound watershed restoration plans, and climate change adaptation and mitigation strategies. This study links an ecohydrological model (Water Supply and Stress Index, WaSSI) with WRF (Weather Research and Forecasting Model) dynamically downscaled climate projections of the HadCM3 model under the IPCC SRES A2 emission scenario. We evaluated the future (2031-2060) changes in evapotranspiration (ET), water yield (Q) and gross primary productivity (GPP) from the baseline period of 1979-2007 across the 82 773 watersheds (12 digit Hydrologic Unit Code level) in the conterminous US (CONUS), and evaluated the future annual and monthly changes of hydrology and ecosystem productivity for the 18 Water Resource Regions (WRRs) or 2-digit HUCs. Across the CONUS, the future multi-year means show increases in annual precipitation (P) of 45 mm yr-1 (6 %), 1.8 °C increase in temperature (T), 37 mm yr-1 (7 %) increase in ET, 9 mm yr-1 (3 %) increase in Q, and 106 g C m-2 yr-1 (9 %) increase in GPP. Response to climate change was highly variable across the 82, 773 watersheds, but in general, the majority would see consistent increases in all variables evaluated. Over half of the 82 773 watersheds, mostly found in the northeast and the southern part of the southwest would have an increase in annual Q (>100 mm yr-1 or 20 %). This study provides an integrated method and example for comprehensive assessment of the potential impacts of climate change on watershed water balances and ecosystem productivity at high spatial and temporal resolutions. Results will be useful for policy-makers and land managers in formulating appropriate watershed-specific strategies for sustaining water and carbon sources in the face of climate change.

Historical overfishing and the recent collapse of coastal ecosystems

USGS Publications Warehouse

Jackson, J.B.C.; Kirby, M.X.; Berger, W.H.; Bjorndal, K.A.; Botsford, L.W.; Bourque, B.J.; Bradbury, R.; Cooke, R.; Erlandson, J.; Estes, J.A.; Hughes, T.P.; Kidwell, S.; Lange, C.B.; Lenihan, H.S.; Pandolfi, J.M.; Peterson, C.H.; Steneck, R.S.; Tegner, M.J.; Warner, R.

2001-01-01

A method for calculating parameters necessary to maintain stable populations is described and the management implications of the method are discussed. This method depends upon knowledge of the population mortality rate schedule, the age at which the species reaches maturity, and recruitment rates or age ratios in the population. Four approaches are presented which yield information about the status of the population: (1) necessary production for a stable population, (2) allowable mortality for a stable population, (3) annual rate of change in population size, and (4) age ratios in the population which yield a stable condition. General formulas for these relationships, and formulas for several special cases, are presented. Tables are also presented showing production required to maintain a stable population with the simpler (more common) mortality and fecundity schedules.

Absorbing Software Testing into the Scrum Method

NASA Astrophysics Data System (ADS)

Tuomikoski, Janne; Tervonen, Ilkka

In this paper we study, how to absorb software testing into the Scrum method. We conducted the research as an action research during the years 2007-2008 with three iterations. The result showed that testing can and even should be absorbed to the Scrum method. The testing team was merged into the Scrum teams. The teams can now deliver better working software in a shorter time, because testing keeps track of the progress of the development. Also the team spirit is higher, because the Scrum team members are committed to the same goal. The biggest change from test manager’s point of view was the organized Product Owner Team. Test manager don’t have testing team anymore, and in the future all the testing tasks have to be assigned through the Product Backlog.

[Monitoring method of extraction process for Schisandrae Chinensis Fructus based on near infrared spectroscopy and multivariate statistical process control].

PubMed

Xu, Min; Zhang, Lei; Yue, Hong-Shui; Pang, Hong-Wei; Ye, Zheng-Liang; Ding, Li

2017-10-01

To establish an on-line monitoring method for extraction process of Schisandrae Chinensis Fructus, the formula medicinal material of Yiqi Fumai lyophilized injection by combining near infrared spectroscopy with multi-variable data analysis technology. The multivariate statistical process control (MSPC) model was established based on 5 normal batches in production and 2 test batches were monitored by PC scores, DModX and Hotelling T2 control charts. The results showed that MSPC model had a good monitoring ability for the extraction process. The application of the MSPC model to actual production process could effectively achieve on-line monitoring for extraction process of Schisandrae Chinensis Fructus, and can reflect the change of material properties in the production process in real time. This established process monitoring method could provide reference for the application of process analysis technology in the process quality control of traditional Chinese medicine injections. Copyright© by the Chinese Pharmaceutical Association.

A Review of Methods Applied by the U.S. Geological Survey in the Assessment of Identified Geothermal Resources

USGS Publications Warehouse

Williams, Colin F.; Reed, Marshall J.; Mariner, Robert H.

2008-01-01

The U. S. Geological Survey (USGS) is conducting an updated assessment of geothermal resources in the United States. The primary method applied in assessments of identified geothermal systems by the USGS and other organizations is the volume method, in which the recoverable heat is estimated from the thermal energy available in a reservoir. An important focus in the assessment project is on the development of geothermal resource models consistent with the production histories and observed characteristics of exploited geothermal fields. The new assessment will incorporate some changes in the models for temperature and depth ranges for electric power production, preferred chemical geothermometers for estimates of reservoir temperatures, estimates of reservoir volumes, and geothermal energy recovery factors. Monte Carlo simulations are used to characterize uncertainties in the estimates of electric power generation. These new models for the recovery of heat from heterogeneous, fractured reservoirs provide a physically realistic basis for evaluating the production potential of natural geothermal reservoirs.

Use of Foodomics for Control of Food Processing and Assessing of Food Safety.

PubMed

Josić, D; Peršurić, Ž; Rešetar, D; Martinović, T; Saftić, L; Kraljević Pavelić, S

Food chain, food safety, and food-processing sectors face new challenges due to globalization of food chain and changes in the modern consumer preferences. In addition, gradually increasing microbial resistance, changes in climate, and human errors in food handling remain a pending barrier for the efficient global food safety management. Consequently, a need for development, validation, and implementation of rapid, sensitive, and accurate methods for assessment of food safety often termed as foodomics methods is required. Even though, the growing role of these high-throughput foodomic methods based on genomic, transcriptomic, proteomic, and metabolomic techniques has yet to be completely acknowledged by the regulatory agencies and bodies. The sensitivity and accuracy of these methods are superior to previously used standard analytical procedures and new methods are suitable to address a number of novel requirements posed by the food production sector and global food market. © 2017 Elsevier Inc. All rights reserved.

Multi-criteria evaluation methods in the production scheduling

NASA Astrophysics Data System (ADS)

Kalinowski, K.; Krenczyk, D.; Paprocka, I.; Kempa, W.; Grabowik, C.

2016-08-01

The paper presents a discussion on the practical application of different methods of multi-criteria evaluation in the process of scheduling in manufacturing systems. Among the methods two main groups are specified: methods based on the distance function (using metacriterion) and methods that create a Pareto set of possible solutions. The basic criteria used for scheduling were also described. The overall procedure of evaluation process in production scheduling was presented. It takes into account the actions in the whole scheduling process and human decision maker (HDM) participation. The specified HDM decisions are related to creating and editing a set of evaluation criteria, selection of multi-criteria evaluation method, interaction in the searching process, using informal criteria and making final changes in the schedule for implementation. According to need, process scheduling may be completely or partially automated. Full automatization is possible in case of metacriterion based objective function and if Pareto set is selected - the final decision has to be done by HDM.

Diagnostics of Polymer Composite Materials and Analysis of Their Production Technology by Using the Method of Acoustic Emission

NASA Astrophysics Data System (ADS)

Bashkov, O. V.; Protsenko, A. E.; Bryanskii, A. A.; Romashko, R. V.

2017-09-01

The strength properties of glass-fiber-reinforced plastics produced by vacuum and vacuum autoclave molding techniques are studied. Based on acoustic emission data, a method of diagnostic and prediction of the bearing capacity of polymer composite materials by using data from three-point bending tests is developed. The method is based on evaluating changes in the exponent of a power function relating the total acoustic emission to the test stress.

Solar Energy Systems for Lunar Oxygen Generation

NASA Technical Reports Server (NTRS)

Colozza, Anthony J.; Heller, Richard S.; Wong, Wayne A.; Hepp, Aloysius F.

2010-01-01

An evaluation of several solar concentrator-based systems for producing oxygen from lunar regolith was performed. The systems utilize a solar concentrator mirror to provide thermal energy for the oxygen production process. Thermal energy to power a Stirling heat engine and photovoltaics are compared for the production of electricity. The electricity produced is utilized to operate the equipment needed in the oxygen production process. The initial oxygen production method utilized in the analysis is hydrogen reduction of ilmenite. Utilizing this method of oxygen production a baseline system design was produced. This baseline system had an oxygen production rate of 0.6 kg/hr with a concentrator mirror size of 5 m. Variations were performed on the baseline design to show how changes in the system size and process (rate) affected the oxygen production rate. An evaluation of the power requirements for a carbothermal lunar regolith reduction reactor has also been conducted. The reactor had a total power requirement between 8,320 to 9,961 W when producing 1000 kg/year of oxygen. The solar concentrator used to provide the thermal power (over 82 percent of the total energy requirement) would have a diameter of less than 4 m.

Performance of the AOAC use-dilution method with targeted modifications: collaborative study.

PubMed

Tomasino, Stephen F; Parker, Albert E; Hamilton, Martin A; Hamilton, Gordon C

2012-01-01

The U.S. Environmental Protection Agency (EPA), in collaboration with an industry work group, spearheaded a collaborative study designed to further enhance the AOAC use-dilution method (UDM). Based on feedback from laboratories that routinely conduct the UDM, improvements to the test culture preparation steps were prioritized. A set of modifications, largely based on culturing the test microbes on agar as specified in the AOAC hard surface carrier test method, were evaluated in a five-laboratory trial. The modifications targeted the preparation of the Pseudomonas aeruginosa test culture due to the difficulty in separating the pellicle from the broth in the current UDM. The proposed modifications (i.e., the modified UDM) were compared to the current UDM methodology for P. aeruginosa and Staphylococcus aureus. Salmonella choleraesuis was not included in the study. The goal was to determine if the modifications reduced method variability. Three efficacy response variables were statistically analyzed: the number of positive carriers, the log reduction, and the pass/fail outcome. The scope of the collaborative study was limited to testing one liquid disinfectant (an EPA-registered quaternary ammonium product) at two levels of presumed product efficacies, high and low. Test conditions included use of 400 ppm hard water as the product diluent and a 5% organic soil load (horse serum) added to the inoculum. Unfortunately, the study failed to support the adoption of the major modification (use of an agar-based approach to grow the test cultures) based on an analysis of method's variability. The repeatability and reproducibility standard deviations for the modified method were equal to or greater than those for the current method across the various test variables. However, the authors propose retaining the frozen stock preparation step of the modified method, and based on the statistical equivalency of the control log densities, support its adoption as a procedural change to the current UDM. The current UDM displayed acceptable responsiveness to changes in product efficacy; acceptable repeatability across multiple tests in each laboratory for the control counts and log reductions; and acceptable reproducibility across multiple laboratories for the control log density values and log reductions. Although the data do not support the adoption of all modifications, the UDM collaborative study data are valuable for assessing sources of method variability and a reassessment of the performance standard for the UDM.

Identification and Remediation of Phonological and Motor Errors in Acquired Sound Production Impairment

PubMed Central

Gagnon, Bernadine; Miozzo, Michele

2017-01-01

Purpose This study aimed to test whether an approach to distinguishing errors arising in phonological processing from those arising in motor planning also predicts the extent to which repetition-based training can lead to improved production of difficult sound sequences. Method Four individuals with acquired speech production impairment who produced consonant cluster errors involving deletion were examined using a repetition task. We compared the acoustic details of productions with deletion errors in target consonant clusters to singleton consonants. Changes in accuracy over the course of the study were also compared. Results Two individuals produced deletion errors consistent with a phonological locus of the errors, and 2 individuals produced errors consistent with a motoric locus of the errors. The 2 individuals who made phonologically driven errors showed no change in performance on a repetition training task, whereas the 2 individuals with motoric errors improved in their production of both trained and untrained items. Conclusions The results extend previous findings about a metric for identifying the source of sound production errors in individuals with both apraxia of speech and aphasia. In particular, this work may provide a tool for identifying predominant error types in individuals with complex deficits. PMID:28655044

Progress in Implementing Non-Cr6+ Surface Finishes for U.S. Navy and Marine Corps Aircraft

DTIC Science & Technology

2012-08-01

methods • Only qualified products to date for Class 1A are based on trivalent chromium • Key aspect overlooked: qualified products provide...date are based on trivalent chromium except one non-Cr • Similar passivation issues/potential changes as Class 1A coatings Aluminum Anodizing...including water, nickel, cobalt, trivalent chromium , and duplex Conversion coatings and Anodizing for Magnesium: SAE-AMS-M-3141 • Specification

Flexible manufacturing system handbook. Volume 1: Executive summary

NASA Astrophysics Data System (ADS)

1983-02-01

Flexible Manufacturing Systems (FMSs) represent a relatively new strategy to increase productivity. The technology is especially attractive for manufacturers who produce in the middle ranges of production volumes, neither mass production nor one of a kind. Today's unpredictable market environment demands low-cost solutions that provide quick product start-up, adaptability and responsiveness to changes in demand, and the capacity to easily resurrect out-of-production designs. In many instances, FMSs provide a direct hardware/software solution to this threefold management challenge. The adoption of FMS technology requires that one address many questions beforehand. This handbook provides a methodical approach to answering these questions. But it is not a cookbook; it cannot be. Each application of FMS technology is unique, therefore, the guidelines presented are fairly general.

Pricing Models and Payment Schemes for Library Collections.

ERIC Educational Resources Information Center

Stern, David

2002-01-01

Discusses new pricing and payment options for libraries in light of online products. Topics include alternative cost models rather than traditional subscriptions; use-based pricing; changes in scholarly communication due to information technology; methods to determine appropriate charges for different organizations; consortial plans; funding; and…

Mechanisms of deterioration of nutrients. [improved quality of freeze-dried foods

NASA Technical Reports Server (NTRS)

Karel, M.; Flink, J. M.

1978-01-01

Methods for improving the quality of freeze-dried foods were investigated. Areas discussed include: (1) microstructure of freeze-dried systems, (2) structural changes in freeze-dried systems, (3) artificial food matrices, and (4) osmotic preconcentration to yield improved freeze-dried products.

Qualitative Research as a Tool for Agricultural and Extension Education.

ERIC Educational Resources Information Center

Campbell, Michael; Martin, Robert

1992-01-01

Three case studies of Third World development illustrate the usefulness of qualitative research methods such as CIPP (Context, Input, Process, Product), oneshot interviews, and grounded theory. Adjusting technology to people and cultures rather than changing people to fit technology is advocated. (SK)

Synchronized manufacture of composites knowledge study (SMACKS)

NASA Astrophysics Data System (ADS)

Strickland, B.; Oliver, M.

1990-06-01

The need for a competitive manufacturing knowledge base for the composites industry, encompasses a change from a 'functionally' organized factory to a product-based organization, and has led to major reductions in inventories, manufacturing costs and cycle times. The net effect was that products became more price- and delivery-competitive. It is believed that composite manufacturers have an equal need to improve their competitive edge, particularly as the demand for composite products grows and more manufacturers enter the marketplace. 'SMACKS' has begun to establish these needs and market trends, with a view to establishing the advantages offered to composite manufacturers by synchronized manufacturing methods.

Diversification of the rare-earth business in the existing enterprises

NASA Astrophysics Data System (ADS)

Bogdanov, S. V.; Grishaev, S. I.; Yazev, V. A.

2013-12-01

The development of the modern rare-earth business is analyzed, and the possibilities of using a mathematical description of the prospects of this business on the basis of nonlinear evolution equations are estimated. The well-known methods of describing the life cycle of the economic activity of a commercial company in the closed multisector model of market economics is used to determine the boundaries of changing the average labor productivity during the diversification of business on operating Russian enterprises that produce a wide range of products and are intended to manufacture new types of high-technology rare-earth metal products.

Analytical methods for quantifying greenhouse gas flux in animal production systems.

PubMed

Powers, W; Capelari, M

2016-08-01

Given increased interest by all stakeholders to better understand the contribution of animal agriculture to climate change, it is important that appropriate methodologies be used when measuring greenhouse gas (GHG) emissions from animal agriculture. Similarly, a fundamental understanding of the differences between methods is necessary to appropriately compare data collected using different approaches and design meaningful experiments. Sources of carbon dioxide, methane, and nitrous oxide emissions in animal production systems includes the animals, feed storage areas, manure deposition and storage areas, and feed and forage production fields. These 3 gases make up the primary GHG emissions from animal feeding operations. Each of the different GHG may be more or less prominent from each emitting source. Similarly, the species dictates the importance of methane emissions from the animals themselves. Measures of GHG flux from animals are often made using respiration chambers, head boxes, tracer gas techniques, or in vitro gas production techniques. In some cases, a combination of techniques are used (i.e., head boxes in combination with tracer gas). The prominent methods for measuring GHG emissions from housing include the use of tracer gas techniques or direct or indirect ventilation measures coupled with concentration measures of gases of interest. Methods for collecting and measuring GHG emissions from manure storage and/or production lots include the use of downwind measures, often using photoacoustic or open path Fourier transform infrared spectroscopy, combined with modeling techniques or the use of static chambers or flux hood methods. Similar methods can be deployed for determining GHG emissions from fields. Each method identified has its own benefits and challenges to use for the stated application. Considerations for use include intended goal, equipment investment and maintenance, frequency and duration of sampling needed to achieve desired representativeness of emissions over time, accuracy and precision of the method, and environmental influences on the method. In the absence of a perfect method for all situations, full knowledge of the advantages and disadvantages of each method is extremely important during the development of the experimental design and interpretation of results. The selection of the suitable technique depends on the animal production system, resource availability, and objective for measurements.

Finger wear detection for production line battery tester

DOEpatents

Depiante, Eduardo V.

1997-01-01

A method for detecting wear in a battery tester probe. The method includes providing a battery tester unit having at least one tester finger, generating a tester signal using the tester fingers and battery tester unit with the signal characteristic of the electrochemical condition of the battery and the tester finger, applying wavelet transformation to the tester signal including computing a mother wavelet to produce finger wear indicator signals, analyzing the signals to create a finger wear index, comparing the wear index for the tester finger with the index for a new tester finger and generating a tester finger signal change signal to indicate achieving a threshold wear change.

An adaptation strategy of sandland peasants in Yogyakarta toward climate change

NASA Astrophysics Data System (ADS)

Rusdiyana, E.; Suminah

2018-03-01

This study aims to explore and describe the adaptation strategies of sandland peasants toward climate change. Qualitative research method was employed and the data were collected through observation. In addition, the recording of the data, interview and the validity of data were determined by triangulation of sources. The results of the research showed that the adaptation strategies of sandland peasants toward climate change were; (1) the adjustment of crop varieties, (2) the utilization of productive crops as wind breaking, and (3) the irrigation system using “sumur panthek”.

Data driven approaches vs. qualitative approaches in climate change impact and vulnerability assessment.

NASA Astrophysics Data System (ADS)

Zebisch, Marc; Schneiderbauer, Stefan; Petitta, Marcello

2015-04-01

In the last decade the scope of climate change science has broadened significantly. 15 years ago the focus was mainly on understanding climate change, providing climate change scenarios and giving ideas about potential climate change impacts. Today, adaptation to climate change has become an increasingly important field of politics and one role of science is to inform and consult this process. Therefore, climate change science is not anymore focusing on data driven approaches only (such as climate or climate impact models) but is progressively applying and relying on qualitative approaches including opinion and expertise acquired through interactive processes with local stakeholders and decision maker. Furthermore, climate change science is facing the challenge of normative questions, such us 'how important is a decrease of yield in a developed country where agriculture only represents 3% of the GDP and the supply with agricultural products is strongly linked to global markets and less depending on local production?'. In this talk we will present examples from various applied research and consultancy projects on climate change vulnerabilities including data driven methods (e.g. remote sensing and modelling) to semi-quantitative and qualitative assessment approaches. Furthermore, we will discuss bottlenecks, pitfalls and opportunities in transferring climate change science to policy and decision maker oriented climate services.

How well are the climate indices related to the GRACE-observed total water storage changes in China?

NASA Astrophysics Data System (ADS)

Devaraju, B.; Vishwakarma, B.; Sneeuw, N. J.

2017-12-01

The fresh water availability over land masses is changing rapidly under the influence of climate change and human intervention. In order to manage our water resources and plan for a better future, we need to demarcate the role of climate change. The total water storage change in a region can be obtained from the GRACE satellite mission. On the other hand, many climate change indicators, for example ENSO, are derived from sea surface temperature. In this contribution we investigate the relationship between the total water storage change over China with the climate indices using statistical time-series decomposition techniques, such as Seasonal and Trend decomposition using Loess (STL), Principal Component Analysis (PCA) and Canonical Correlation Analysis (CCA). The anomalies in climate variables, such as sea surface temperature, are responsible for anomalous precipitation and thus an anomalous total water storage change over land. Therefore, it is imperative that we use a GRACE product that can capture anomalous water storage changes with unprecedented accuracy. Since filtering decreases the sensitivity of GRACE products substantially, we use the data-driven method of deviation for recovering the signal lost due to filtering. To this end, we are able to obtain the spatial fingerprint of individual climate index on total water storage change observed over China.

Investigation of Physico-Chemical Properties of Sand-Lime Products Modified of Diabase Aggregate and Chalcedonite Meal

NASA Astrophysics Data System (ADS)

Dachowski, Ryszard; Komisarczyk, Katarzyna

2017-10-01

In the era of rapid development in the construction industry, particular attention is focused on harmless and natural materials. Some of the best materials for building masonry walls are sand-lime products. Silicates are obtained from a mixture of quartz, sand and a small amount of water. They emerge as a result of the hydrothermal treatment conducted under high pressure and at a temperature of app. 203 °C. Silicates were modified of different kinds of aggregates, glass or plastics, and the content of dry ingredients was changed because of this fact. The paper describes the studies where the combination of diabase aggregate and chalcedonite meal was used. Microstructure of the products was analyzed with the use of mercury intrusion porosimetry, SEM and XRD methods. Variable content of chalcedonite meal changes the internal structure and the physico-chemical properties.

Encapsulation of black carrot juice using spray and freeze drying.

PubMed

Murali, S; Kar, Abhijit; Mohapatra, Debabandya; Kalia, Pritam

2015-12-01

Black carrot juice extracted using pectinase enzyme was encapsulated in three different carrier materials (maltodextrin 20DE, gum arabic and tapioca starch) using spray drying at four inlet temperatures (150, 175, 200 and 225 ℃) and freeze drying at a constant temperature of - 53 ℃ and vacuum of 0.22-0.11 mbar with the constant feed mixture. The products were analyzed for total anthocyanin content, antioxidant activity, water solubility index, encapsulation efficiency and total colour change. For both the drying methods followed in this study, maltodextrin 20DE as the carrier material has proven to be better in retaining maximum anthocyanin and antioxidant activity compared to gum arabic and tapioca starch. The best spray dried product, was obtained at 150 ℃. The most acceptable was the freeze dried product with maximum anthocyanin content, antioxidant activity, water solubility index, encapsulation efficiency and colour change. © The Author(s) 2014.

TRUSS: An intelligent design system for aircraft wings

NASA Technical Reports Server (NTRS)

Bates, Preston R.; Schrage, Daniel P.

1989-01-01

Competitive leadership in the international marketplace, superiority in national defense, excellence in productivity, and safety of both private and public systems are all national defense goals which are dependent on superior engineering design. In recent years, it has become more evident that early design decisions are critical, and when only based on performance often result in products which are too expensive, hard to manufacture, or unsupportable. Better use of computer-aided design tools and information-based technologies is required to produce better quality United States products. A program is outlined here to explore the use of knowledge based expert systems coupled with numerical optimization, database management techniques, and designer interface methods in a networked design environment to improve and assess design changes due to changing emphasis or requirements. The initial structural design of a tiltrotor aircraft wing is used as a representative example to demonstrate the approach being followed.

Tracking of Environment Changes by Exploitation of Suomi-NPP VIIRS Data

NASA Astrophysics Data System (ADS)

Ibrahim, W.; Greene, E.; van Poollen, C.; Cumpton, D.

2017-12-01

NOAA's next-generation environmental satellite system, Joint Polar Satellite System (JPSS), replaces the current Polar-orbiting Operational Environmental Satellites. JPSS satellites carry sensors which collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The first JPSS satellite, Suomi National Polar-orbiting Partnership (S-NPP), was launched in 2011. The JPSS ground system is the Common Ground System (CGS), and provides command, control, and communications (C3) and data processing (DP). S-NPP satellite includes the Visible Infrared Imaging Radiometer Suite (VIIRS), a 22-band scanning radiometer that provides top-of-atmosphere radiances and reflectances at a range of visible and infrared frequencies. Data collected from VIIRS are output by CGS DP into Raw Data Records (RDRs; Level-0), Sensor Data Records (SDRs; Level-1B) and Environmental Data Records (EDRs; Level-1C). This paper presents a methodology of monitoring and tracking impact of weather conditions on environment changes by exploitation of data from S-NPP VIIRS products. Three different products created from VIIRS data, SDR M-band True-Color (TC) composite visible imagery RGB (M5, M4 and M3), SDR M-band Natural-Color (NC) composite imagery RGB (M10, M7 and M5) and Vegetation Index (VI) EDR, are used to analyze the change in springtime vegetation and snowpack in California, USA, over four years from the height of the drought in 2014 to its end in 2017. While the TC composite images are more appealing to the human observer, utilization of the NC composite images allows for tracking and monitoring the changes in the snowpack in the Sierra Nevada, the reappearance of bodies of water and the changes in the vegetation composite. The VI product uses NDVI to characterize the vegetation temporally. By combining multiple VIIRS products, complex scenes can be visualized and analyzed temporally and spatially more accurately than just using a single product. Assimilation of both imagery and EDR products allows for a better characterization of impact of weather conditions on environment changes. This method can be expanded to characterize impact of weather conditions on environment changes in sea ice, snow, forest, agricultural land, population centers, etc.

Net uptake of atmospheric CO2 by coastal submerged aquatic vegetation

PubMed Central

Tokoro, Tatsuki; Hosokawa, Shinya; Miyoshi, Eiichi; Tada, Kazufumi; Watanabe, Kenta; Montani, Shigeru; Kayanne, Hajime; Kuwae, Tomohiro

2014-01-01

‘Blue Carbon’, which is carbon captured by marine living organisms, has recently been highlighted as a new option for climate change mitigation initiatives. In particular, coastal ecosystems have been recognized as significant carbon stocks because of their high burial rates and long-term sequestration of carbon. However, the direct contribution of Blue Carbon to the uptake of atmospheric CO2 through air-sea gas exchange remains unclear. We performed in situ measurements of carbon flows, including air-sea CO2 fluxes, dissolved inorganic carbon changes, net ecosystem production, and carbon burial rates in the boreal (Furen), temperate (Kurihama), and subtropical (Fukido) seagrass meadows of Japan from 2010 to 2013. In particular, the air-sea CO2 flux was measured using three methods: the bulk formula method, the floating chamber method, and the eddy covariance method. Our empirical results show that submerged autotrophic vegetation in shallow coastal waters can be functionally a sink for atmospheric CO2. This finding is contrary to the conventional perception that most near-shore ecosystems are sources of atmospheric CO2. The key factor determining whether or not coastal ecosystems directly decrease the concentration of atmospheric CO2 may be net ecosystem production. This study thus identifies a new ecosystem function of coastal vegetated systems; they are direct sinks of atmospheric CO2. PMID:24623530

Insurance World in Transition: Changes in Global Risk Taking and Risk Assessment

NASA Astrophysics Data System (ADS)

Michel, Gero; Tiampo, Kristy

2015-04-01

Catastrophe insurance risk assessment, risk taking, and regulation has evolved over the last 20 years and is gearing up for significant further change in the years ahead. Changes in regulation and influx of capital have put profit margins for catastrophe risk products under pressure despite the fact that changes in climate as well as increasing insurance penetration is expected to heighten demand. As a result, reinsurance strategies are moving away from catastrophe risk. In addition, lower margins require cheaper and more efficient risk assessment methods and processes which are contrary to evolving analytical tools and methods that had increased expenses in line with growing margins over the last decade. New capital providers are less familiar with and less willing to accept complex supply chains for risk management, relationship-driven business and tedious data exchange and management processes. Risk takers claim new measures and ask for more flexibility in the use of tools. The current concepts of catastrophe insurance risk assessment are hence under thorough scrutiny. This presentation deals with the changing landscape in catastrophe insurance risk assessment and risk hedging and discusses changes in catastrophe risk assessment products and demand. How likely is it that private, small and nimble hazard and risk consulting groups - increasingly emanating from larger science organizations - will replace large established firms in their role to assess risk? What role do public-private academic partnerships play in assuming risk for catastrophe insurance and what role could they play in the future? What are the opportunities and downsides of the current changes in risk taking and hedging? What is needed from the scientific community in order to fill the gaps in risk management and who is likely to take advantage of the current changes?

Optical measurement of isolated canine lung filtration coefficients at normal hematocrits.

PubMed

Klaesner, J W; Pou, N A; Parker, R E; Finney, C; Roselli, R J

1997-12-01

In this study, lung filtration coefficient (Kfc) values were measured in eight isolated canine lung preparations at normal hematocrit values using three methods: gravimetric, blood-corrected gravimetric, and optical. The lungs were kept in zone 3 conditions and subjected to an average venous pressure increase of 10.24 +/- 0.27 (SE) cmH2O. The resulting Kfc (ml . min-1 . cmH2O-1 . 100 g dry lung wt-1) measured with the gravimetric technique was 0.420 +/- 0.017, which was statistically different from the Kfc measured by the blood-corrected gravimetric method (0.273 +/- 0.018) or the product of the reflection coefficient (sigmaf) and Kfc measured optically (0. 272 +/- 0.018). The optical method involved the use of a Cellco filter cartridge to separate red blood cells from plasma, which allowed measurement of the concentration of the tracer in plasma at normal hematocrits (34 +/- 1.5). The permeability-surface area product was measured using radioactive multiple indicator-dilution methods before, during, and after venous pressure elevations. Results showed that the surface area of the lung did not change significantly during the measurement of Kfc. These studies suggest that sigmafKfc can be measured optically at normal hematocrits, that this measurement is not influenced by blood volume changes that occur during the measurement, and that the optical sigmafKfc agrees with the Kfc obtained via the blood-corrected gravimetric method.

Combining a Spatial Model and Demand Forecasts to Map Future Surface Coal Mining in Appalachia

PubMed Central

Strager, Michael P.; Strager, Jacquelyn M.; Evans, Jeffrey S.; Dunscomb, Judy K.; Kreps, Brad J.; Maxwell, Aaron E.

2015-01-01

Predicting the locations of future surface coal mining in Appalachia is challenging for a number of reasons. Economic and regulatory factors impact the coal mining industry and forecasts of future coal production do not specifically predict changes in location of future coal production. With the potential environmental impacts from surface coal mining, prediction of the location of future activity would be valuable to decision makers. The goal of this study was to provide a method for predicting future surface coal mining extents under changing economic and regulatory forecasts through the year 2035. This was accomplished by integrating a spatial model with production demand forecasts to predict (1 km2) gridded cell size land cover change. Combining these two inputs was possible with a ratio which linked coal extraction quantities to a unit area extent. The result was a spatial distribution of probabilities allocated over forecasted demand for the Appalachian region including northern, central, southern, and eastern Illinois coal regions. The results can be used to better plan for land use alterations and potential cumulative impacts. PMID:26090883

African N Assessment

NASA Astrophysics Data System (ADS)

Bekunda, M.; Galford, G. L.; Hickman, J. E.; Palm, C.

2011-12-01

Africa's smallholder agricultural systems face unique challenges in planning for reducing poverty, concurrent with adaptation and mitigation to climate change. At continental level, policy seeks to promote a uniquely African Green Revolution to increase crop yields and food production, and improve local livelihoods. However, the consequences on the environment and climate are not clear; these pro-economic development measures should be linked to climate change adaptation and mitigation measures, and research is required to help achieve these policy proposals by identifying options, and testing impacts. In particular, increased nitrogen (N) inputs are essential for increasing food production in Africa, but are accompanied by inevitable increases in losses to the environment. These losses appear to be low at input levels promoted in agricultural development programs, while the increased N inputs both increase current food production and appear to reduce the vulnerability of food production to changes in climate. We present field and remote sensing evidence from Malawi that subsidizing improved seed and fertilizers increases resilience to drought without adding excess N to the environment. In Kenya, field research identified thresholds in N2O losses, where emissions are very low at fertilization rates of less than 200 kg ha-1. Village-scale models have identified potential inefficiencies in the food production process where the largest losses of reactive N occur, and which could be targeted to reduce the amount of N released to the environment. We further review some on-going research activities and progress in Africa that compare different methods of managing resources that target resilience in food production and adaptation to climate change, using nutrient N as an indicator, while evaluating the effects of these resource management practices on ecosystems and the environment.

Cloud masking and removal in remote sensing image time series

NASA Astrophysics Data System (ADS)

Gómez-Chova, Luis; Amorós-López, Julia; Mateo-García, Gonzalo; Muñoz-Marí, Jordi; Camps-Valls, Gustau

2017-01-01

Automatic cloud masking of Earth observation images is one of the first required steps in optical remote sensing data processing since the operational use and product generation from satellite image time series might be hampered by undetected clouds. The high temporal revisit of current and forthcoming missions and the scarcity of labeled data force us to cast cloud screening as an unsupervised change detection problem in the temporal domain. We introduce a cloud screening method based on detecting abrupt changes along the time dimension. The main assumption is that image time series follow smooth variations over land (background) and abrupt changes will be mainly due to the presence of clouds. The method estimates the background surface changes using the information in the time series. In particular, we propose linear and nonlinear least squares regression algorithms that minimize both the prediction and the estimation error simultaneously. Then, significant differences in the image of interest with respect to the estimated background are identified as clouds. The use of kernel methods allows the generalization of the algorithm to account for higher-order (nonlinear) feature relations. After the proposed cloud masking and cloud removal, cloud-free time series at high spatial resolution can be used to obtain a better monitoring of land cover dynamics and to generate more elaborated products. The method is tested in a dataset with 5-day revisit time series from SPOT-4 at high resolution and with Landsat-8 time series. Experimental results show that the proposed method yields more accurate cloud masks when confronted with state-of-the-art approaches typically used in operational settings. In addition, the algorithm has been implemented in the Google Earth Engine platform, which allows us to access the full Landsat-8 catalog and work in a parallel distributed platform to extend its applicability to a global planetary scale.

Validating a faster method for reconstitution of Crotalidae Polyvalent Immune Fab (ovine).

PubMed

Gerring, David; King, Thomas R; Branton, Richard

2013-07-01

Reconstitution of CroFab(®) (Crotalidae Polyvalent Immune Fab [ovine]) lyophilized drug product was previously performed using 10 mL sterile water for injection followed by up to 36 min of gentle swirling of the vial. CroFab has been clinically demonstrated to be most effective when administered within 6 h of snake envenomation, and improved clinical outcomes are correlated with quicker timing of administration. An alternate reconstitution method was devised, using 18 mL 0.9% saline with manual inversion, with the goal of shortening reconstitution time while maintaining a high quality, efficacious product. An analytical study was designed to compare the physicochemical properties of 3 separate batches of CroFab when reconstituted using the standard procedure (10 mL WFI with gentle swirling) and a modified rapid procedure using 18 mL 0.9% saline and manual inversion. The physical and chemical characteristics of the same 3 batches were assessed using various analytic methodologies associated with routine quality control release testing. In addition further analytical methodologies were applied in order to elucidate possible structural changes that may be induced by the changed reconstitution procedure. Batches A, B, and C required mean reconstitution times of 25 min 51 s using the label method and 3 min 07 s (a 88.0% mean decrease) using the modified method. Physicochemical characteristics (color and clarity, pH, purity, protein content, potency) were found to be highly comparable. Characterization assays (dynamic light scattering, analytical ultracentrifugation, LC-MS, SDS-PAGE and circular dichroism spectroscopy were also all found to be comparable between methods. When comparing CroFab batches that were reconstituted using the labeled and modified methods, the physicochemical and biological (potency) characteristics of CroFab were not significantly changed when challenged by the various standard analytical methodologies applied in routine quality control analysis. Additionally, no changes in the CroFab molecule regarding degradation, aggregation, purity, structure, or mass were observed. The analyses performed validated the use of the more rapid reconstitution method using 18 mL 0.9% saline in order to allow a significantly reduced time to administration of CroFab to patients in need. Copyright © 2013 Elsevier Ltd. All rights reserved.

Macrofaunal production and biological traits: Spatial relationships along the UK continental shelf

NASA Astrophysics Data System (ADS)

Bolam, S. G.; Eggleton, J. D.

2014-04-01

Biological trait analysis (BTA) is increasingly being employed to improve our understanding of the ecological functioning of marine benthic invertebrate communities. However, changes in trait composition are seldomly compared with concomitant changes in metrics of ecological function. Consequently, inferences regarding the functional implications of any changes are often anecdotal; we currently have a limited understanding of the functional significance of the traits commonly used. In this study, we quantify the relationship between benthic invertebrate trait composition and secondary production estimates using data spanning almost the breadth of the UK continental shelf. Communities described by their composition of 10 traits representing life history, morphology and behaviour showed strong relationships with variations in total secondary production. A much weaker relationship was observed for community productivity (or P:B), a measure of rate of energy turnover. Furthermore, the relationship between total production and multivariate taxonomic community composition was far weaker than that for trait composition. Indeed, the similarities between communities as defined by taxonomy were very different from those depicted by their trait composition. That is, as many studies have demonstrated, taxonomically different communities may display similar trait compositions, and vice versa. Finally, we found that descriptions of community trait composition vary greatly depending on whether abundance or biomass is used as the enumeration weighting method during BTA, and trait assessments based on biomass produced better relations with secondary production than those based on abundance. We discuss the significance of these findings with respect to BTA using marine benthic invertebrates.

Use of a latitudinal gradient in bald cypress (Taxodium distichum) production to examine physiological controls of biotic boundaries and potential responses to environment change

USGS Publications Warehouse

Middleton, B.A.; McKee, K.L.

2004-01-01

Aim: Predictions of vegetation change with global warming require models that accurately reflect physiological processes underlying growth limitations and species distributions. However, information about environmental controls on physiology and consequent effects on species boundaries and ecosystem functions such as production is limited, especially for forested wetlands that are potentially important carbon sinks. Location: The bald cypress (Taxodium distichum) region of the south-eastern United States was studied to examine how production of an important forested wetland varies with latitude and temperature as well as local hydrology. Methods: We used published data to analyse litter production across a latitudinal gradient from 26.2 to 37.8?? N to determine how bald cypress swamps might respond to alternate climate conditions and what changes might occur throughout the distributional range. Results: Litterfall rates followed a bell shaped curve, indicating that production was more limited at the distributional boundaries (c. 225 g/m2 year-1) compared to the mid-range (795-1126 g/m2 year-1). This pattern suggests that conditions are sub-optimal near both boundaries and that the absence of populations outside this latitudinal range may be largely due to physiological constraints on the carbon balance of dominant species. While dispersal limitations cannot be totally discounted, competition with other wetland types at the extremes of the range does not seem likely to be important because the relative basal area of bald cypress does not decrease near the edges of the range. Impaired hydrology depressed production across the entire range, but more in the south than the north. Main conclusions: Our findings suggest that (1) physiological limitations constrain biotic boundaries of bald cypress swamps; (2) future changes in global temperature would affect litter production in a nonlinear manner across the distributional range; (3) local changes in hydrology may interact with climate to further reduce litter production, particularly at lower latitudes; and (4) southernmost forests could be extirpated if environmental conditions compromise carbon balance and water-use efficiency of trees. ?? 2004 Blackwell Publishing Ltd.

Challenges in measuring and valuing productivity costs, and their relevance in mood disorders

PubMed Central

Lensberg, Benedikte R; Drummond, Michael F; Danchenko, Natalya; Despiégel, Nicolas; François, Clément

2013-01-01

Lost productivity is often excluded from economic evaluations, which may lead to an underestimation of the societal benefits of treatment. However, there are multiple challenges in reliably estimating and reporting productivity losses. This article explores the main challenges, ie, selecting an appropriate valuation method (ie, human capital, friction cost, or multiplier), avoiding double counting, and accounting for equity. It also discusses the use of presenteeism instruments and their application in clinical trials, with a specific focus on their relevance in individuals with mood disorders. Further research and discussion is required on the development of reliable techniques for measuring and valuing productivity changes due to presenteeism. PMID:24273412

Detection of Maillard reaction products by a coupled HPLC-Fraction collector technique and FTIR characterization of Cu(II)-complexation with the isolated species

NASA Astrophysics Data System (ADS)

Ioannou, Aristos; Daskalakis, Vangelis; Varotsis, Constantinos

2017-08-01

The isolation of reaction products of asparagine with reducing sugars at alkaline pH and high temperature has been probed by a combination of high performance liquid chromatography (HPLC) coupled with a Fraction Collector. The UV-vis and FTIR spectra of the isolated Maillard reaction products showed structure-sensitive changes as depicted by deamination events and formation of asparagine-saccharide conjugates. The initial reaction species of the Asn-Gluc reaction were also characterized by Density Functional Theory (DFT) methods. Evidence for Cu (II) metal ion complexation with the Maillard reaction products is supported by UV-vis and FTIR spectroscopy.

Micro-hydromechanical deep drawing of metal cups with hydraulic pressure effects

NASA Astrophysics Data System (ADS)

Luo, Liang; Jiang, Zhengyi; Wei, Dongbin; Wang, Xiaogang; Zhou, Cunlong; Huang, Qingxue

2018-03-01

Micro-metal products have recently enjoyed high demand. In addition, metal microforming has drawn increasing attention due to its net-forming capability, batch manufacturing potential, high product quality, and relatively low equipment cost. Micro-hydromechanical deep drawing (MHDD), a typical microforming method, has been developed to take advantage of hydraulic force. With reduced dimensions, the hydraulic pressure development changes; accordingly, the lubrication condition changes from the macroscale to the microscale. A Voronoi-based finite element model is proposed in this paper to consider the change in lubrication in MHDD according to open and closed lubricant pocket theory. Simulation results agree with experimental results concerning drawing force. Changes in friction significantly affect the drawing process and the drawn cups. Moreover, defined wrinkle indexes have been shown to have a complex relationship with hydraulic pressure. High hydraulic pressure can increase the maximum drawing ratio (drawn cup height), whereas the surface finish represented by the wear is not linearly dependent on the hydraulic pressure due to the wrinkles.

[Impact of the funding reform of teaching hospitals in Brazil].

PubMed

Lobo, M S C; Silva, A C M; Lins, M P E; Fiszman, R

2009-06-01

To assess the impact of funding reform on the productivity of teaching hospitals. Based on the Information System of Federal University Hospitals of Brazil, 2003 and 2006 efficiency and productivity were measured using frontier methods with a linear programming technique, data envelopment analysis, and input-oriented variable returns to scale model. The Malmquist index was calculated to detect changes during the study period: 'technical efficiency change,' or the relative variation of the efficiency of each unit; and 'technological change' after frontier shift. There was 51% mean budget increase and improvement of technical efficiency of teaching hospitals (previously 11, 17 hospitals reached the empirical efficiency frontier) but the same was not seen for the technology frontier. Data envelopment analysis set benchmark scores for each inefficient unit (before and after reform) and there was a positive correlation between technical efficiency and teaching intensity and dedication. The reform promoted management improvements but there is a need of further follow-up to assess the effectiveness of funding changes.

Dynamic profiling of different ready-to-drink fermented dairy products: A comparative study using Temporal Check-All-That-Apply (TCATA), Temporal Dominance of Sensations (TDS) and Progressive Profile (PP).

PubMed

Esmerino, Erick A; Castura, John C; Ferraz, Juliana P; Tavares Filho, Elson R; Silva, Ramon; Cruz, Adriano G; Freitas, Mônica Q; Bolini, Helena M A

2017-11-01

Despite the several differences in ingredients, processes and nutritional values, dairy foods as yogurts, fermented milks and milk beverages are widely accepted worldwide, and although they have their sensory profiling normally covered by descriptive analyses, the temporal perception involved during the consumption are rarely considered. In this sense, the present work aimed to assess the dynamic sensory profile of three categories of fermented dairy products using different temporal methodologies: Temporal Dominance of Sensations (TDS), Progressive Profiling (PP), Temporal CATA (TCATA), and compare the results obtained. The findings showed that the different sensory characteristics among the products are basically related to their commercial identity. Regarding the methods, all of them collected the variations between samples with great correlation between data. In addition, to detect differences in intensities, TCATA showed to be the most sensitive method in detecting textural changes. When using PP, a balanced experimental design considering the number of attributes, time intervals, and food matrix must be weighed. The findings are of interest to guide sensory and consumer practitioners involved in the dairy production to formulate/reformulate their products and help them choosing the most suitable dynamic method to temporally evaluate them. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of stover fraction and storage method on glucose production during enzymatic hydrolysis.

PubMed

Montross, M D; Crofcheck, C L

2004-05-01

One avenue for overcoming the economic challenges associated with the production of ethanol from renewable resources is to reduce the cost of the biomass feedstock. The balance between storage costs and benefits depend on the storage method and composition changes of individual stover fractions. Corn stover from bales stored inside and outside of a barn was separated into an interior and exterior layer after approximately 10 months of storage. The cobs, stalks, and leaves and husks were separated, dried, and ground through a 2 mm screen. Stover, sodium acetate (buffer), cellulase, and deionized water were added to 125 ml flasks. The mixture was held at 50 degrees C in an incubator and samples taken for glucose determination. The average glucose concentration after 60 h of hydrolysis from cobs, leaves and husks, and stalks was 10.5, 9.6, and 3.1 g/l, respectively. Cobs, leaves, and husks produced over 300% more glucose than stalks. Storage outside of the barn decreased the glucose production from individual stover components between 4% and 8%. The effect of stover fraction type on glucose production was significant, while the storage treatment effect was not significant. Fractionation of corn stover may be a method to increase the value of corn stover as a feedstock for glucose production.

Salmonella and eggs: from production to plate.

PubMed

Whiley, Harriet; Ross, Kirstin

2015-02-26

Salmonella contamination of eggs and egg shells has been identified as a public health concern worldwide. A recent shift in consumer preferences has impacted on the egg industry, with a push for cage-free egg production methods. There has also been an increased desire from consumers for raw and unprocessed foods, potentially increasing the risk of salmonellosis. In response to these changes, this review explores the current literature regarding Salmonella contamination of eggs during the production processing through to food handling protocols. The contamination of eggs with Salmonella during the production process is a complex issue, influenced by many variables including flock size, flock age, stress, feed, vaccination, and cleaning routines. Currently there is no consensus regarding the impact of caged, barn and free range egg production has on Salmonella contamination of eggs. The literature regarding the management and control strategies post-collection, during storage, transport and food handling is also reviewed. Pasteurisation and irradiation were identified as the only certain methods for controlling Salmonella and are essential for the protection of high risk groups, whereas control of temperature and pH were identified as potential control methods to minimise the risk for foods containing raw eggs; however, further research is required to provide more detailed control protocols and education programs to reduce the risk of salmonellosis from egg consumption.

Salmonella and Eggs: From Production to Plate

PubMed Central

Whiley, Harriet; Ross, Kirstin

2015-01-01

Salmonella contamination of eggs and egg shells has been identified as a public health concern worldwide. A recent shift in consumer preferences has impacted on the egg industry, with a push for cage-free egg production methods. There has also been an increased desire from consumers for raw and unprocessed foods, potentially increasing the risk of salmonellosis. In response to these changes, this review explores the current literature regarding Salmonella contamination of eggs during the production processing through to food handling protocols. The contamination of eggs with Salmonella during the production process is a complex issue, influenced by many variables including flock size, flock age, stress, feed, vaccination, and cleaning routines. Currently there is no consensus regarding the impact of caged, barn and free range egg production has on Salmonella contamination of eggs. The literature regarding the management and control strategies post-collection, during storage, transport and food handling is also reviewed. Pasteurisation and irradiation were identified as the only certain methods for controlling Salmonella and are essential for the protection of high risk groups, whereas control of temperature and pH were identified as potential control methods to minimise the risk for foods containing raw eggs; however, further research is required to provide more detailed control protocols and education programs to reduce the risk of salmonellosis from egg consumption. PMID:25730295

JRC Copernicus Climate Change Service (C3S) F4P platform.

NASA Astrophysics Data System (ADS)

Mota, Bernardo; Cappucci, Fabrizio; Gobron, Nadine

2016-04-01

With the increasing number of Earth Observation satellites and derived land surface products, concerns of quality assurance led the Global Climate Observing System (GCOS) to establish accuracy criteria and standards. In this context, the Climate Change Copernicus Service (C3S) fitness-for-purpose (F4P) platform, developed at the Joint Research Centre, aims assessing the quality of land Essential Climate Variables (ECVs) in compliance with GCOS criteria. In this paper, we first summarize the JRC C3S FP4 goals and secondly present the automatic review platform to assess multi-mission physical consistencies and physical coherence of and between various land products, at global and regional scales. We propose new metrics, such as Gamma Index and Triple Collocation Error Model, for multi-mission product inter-comparison and stability assessment, and resource selection statistical methods to assess physical coherence with other related ECV products. Examples concern the consistency of five global albedo products (GlobAlbedo, GLASS, MCD43C3, GIO and MISR), between 2000 And 2011, and their coherence with four burnt area products (MCD45A1, MCD64A1, Fire_CCI and GIO) for the overlapping period (2006 to 2008). Preliminary results show reasonable agreement with the inherent limitations of each product algorithm and sensor resolution.

High solar-light photocatalytic activity of using Cu3Se2/rGO nanocomposites synthesized by a green co-precipitation method

NASA Astrophysics Data System (ADS)

Nouri, Morteza; Saray, Abdolali Moghaddam; Azimi, H. R.; Yousefi, Ramin

2017-11-01

Current work presents a facile, cost-effective, and green method to synthesize copper selenide nanostructures and copper selenide/graphene nanocomposites. The products were synthesized by a co-precipitation method by glycine amino acid as a green surfactant and graphene oxide (GO) sheets as a graphene source. X-ray diffraction patterns (XRD) of the products indicated that the products were Cu2Se3 with tetragonal phase. Fourier transform infrared (FTIR) spectroscopy and the XRD patterns indicated that the GO sheets were changed into reduced GO (rGO) during the synthesis process. Scanning and transmission electron microscopy (SEM and TEM) images showed the nanoparticles (NPs) that were decorated on rGO sheets had the significantly smaller size in compared to the pristine NPs. UV-vis results revealed that, the absorption peak of the products were in the visible region with a band-gap value between 1.85 eV and 1.95 eV. Finally, the products were applied as photocatalytic materials to remove Methylene Blue (MB) dye under solar-light and visible-light irradiation conditions. It was observed; the rGO had a significant role in enhancing the photocatalytic performance of the products and Cu2Se3/rGO (15%) could degrade more than 91% and 73% of MB only during 1 h under solar-light and visible-light sources, respectively.

Effects of hot-air and hybrid hot air-microwave drying on drying kinetics and textural quality of nectarine slices

NASA Astrophysics Data System (ADS)

Miraei Ashtiani, Seyed-Hassan; Sturm, Barbara; Nasirahmadi, Abozar

2018-04-01

Drying and physicochemical characteristics of nectarine slices were investigated using hot-air and hybrid hot air-microwave drying methods under fixed air temperature and air speed (50 °C and 0.5 m/s, respectively). Microwave power levels for the combined hot air-microwave method were 80, 160, 240, and 320 W. Drying kinetics were analyzed and compared using six mathematical models. For both drying methods the model with the best fitness in explaining the drying behavior was the Midilli-Kucuk model. The coefficient of determination ( R 2), root mean square error (RMSE) and reduced chi square ( χ 2) for this model have been obtained greater than 0.999 and less than 0.006 and 0.0001 for hybrid hot air-microwave drying while those values for hot-air drying were more than 0.999 and less than 0.003 and 0.0001, respectively. Results showed that the hybrid method reduced the drying time considerably and produced products with higher quality. The range of effective moisture diffusivity ( D eff ) of hybrid and hot-air drying was between 8.15 × 10-8 and 2.83 × 10-7 m2/s and 1.27 × 10-8 m2/s, respectively. The total color difference (ΔE) has also been obtained from 36.68 to 44.27 for hybrid method; however this value for hot-air drying was found 49.64. Although reduced microwave power output led to a lower drying rate, it reduced changes in product parameters i.e. total color change, surface roughness, shrinkage and microstructural change and increased hardness and water uptake.

Fuel Use and Greenhouse Gas Emissions from Offshore Fisheries of the Republic of Korea.

PubMed

Park, Jeong-A; Gardner, Caleb; Chang, Myo-In; Kim, Do-Hoon; Jang, Young-Soo

2015-01-01

Greenhouse Gas (GHG) emissions from the offshore fisheries industry in the Republic of Korea (Korea) were examined in response to growing concerns about global warming and the contribution of emissions from different industrial sectors. Fuel usage and GHG emissions (CO2, CH4, N2O) were analysed using the 'Tier 1' method provided by the Intergovernmental Panel on Climate Change (IPCC) from the offshore fishery, which is the primary domestic seafood production sector in Korea. In 2013, fuel usage in the offshore fishery accounted for 59.7% (557,463 KL) of total fuel consumption of fishing vessels in Korea. Fuel consumption and thus GHG emissions were not stable through time in this industry, increasing by 2.4% p.a. for three consecutive years, from 2011 to 2013, despite a decrease in the number of vessels operating. GHG emissions generated in offshore fisheries also changed through time and increased from 1,442,975 tCO2e/year in 2011 to 1,477,279 tCO2e/year in 2013. Changes in both fuel use and GHG emissions per kg offshore fish production appeared to be associated with decreasing catch rates by the fleet, which in turn were a reflection of decrease in fish biomass. Another important feature of GHG emissions in this industry was the high variation in GHG emission per kg fish product among different fishing methods. The long line fishery had approximately three times the emissions of the average production while the jigging fishery was more than two times higher than the average. Lowest emissions were from the trawl sector, which is regarded as having greatest environmental impact using traditional biodiversity metrics although had lowest environmental impact in terms of fuel and GHG emission metrics used in this study. The observed deterioration in fuel efficiency of the offshore fishery each year is of concern but also demonstrates that fuel efficiency can change, which shows there is opportunity to improve efficiency with changes to fishery management and harvesting operations.

Fuel Use and Greenhouse Gas Emissions from Offshore Fisheries of the Republic of Korea

PubMed Central

Park, Jeong-A; Gardner, Caleb; Chang, Myo-In; Kim, Do-Hoon; Jang, Young-Soo

2015-01-01

Greenhouse Gas (GHG) emissions from the offshore fisheries industry in the Republic of Korea (Korea) were examined in response to growing concerns about global warming and the contribution of emissions from different industrial sectors. Fuel usage and GHG emissions (CO2, CH4, N2O) were analysed using the ‘Tier 1’ method provided by the Intergovernmental Panel on Climate Change (IPCC) from the offshore fishery, which is the primary domestic seafood production sector in Korea. In 2013, fuel usage in the offshore fishery accounted for 59.7% (557,463 KL) of total fuel consumption of fishing vessels in Korea. Fuel consumption and thus GHG emissions were not stable through time in this industry, increasing by 2.4% p.a. for three consecutive years, from 2011 to 2013, despite a decrease in the number of vessels operating. GHG emissions generated in offshore fisheries also changed through time and increased from 1,442,975 tCO2e/year in 2011 to 1,477,279 tCO2e/year in 2013. Changes in both fuel use and GHG emissions per kg offshore fish production appeared to be associated with decreasing catch rates by the fleet, which in turn were a reflection of decrease in fish biomass. Another important feature of GHG emissions in this industry was the high variation in GHG emission per kg fish product among different fishing methods. The long line fishery had approximately three times the emissions of the average production while the jigging fishery was more than two times higher than the average. Lowest emissions were from the trawl sector, which is regarded as having greatest environmental impact using traditional biodiversity metrics although had lowest environmental impact in terms of fuel and GHG emission metrics used in this study. The observed deterioration in fuel efficiency of the offshore fishery each year is of concern but also demonstrates that fuel efficiency can change, which shows there is opportunity to improve efficiency with changes to fishery management and harvesting operations. PMID:26317341

Consideration of Preventing Local Venous Pain by Dacarbazine.

PubMed

Ohtsubo, Tatsuya; Tsuji, Takumi; Umeyama, Takayo; Sudou, Miho; Komesu, Kana; Matsumoto, Minako; Yoshida, Yuya; Banno, Rie; Tomogane, Kanji; Fujita, Atsuo; Kohno, Takeyuki; Mikami, Tadashi

2017-01-01

Local venous pain caused by dacarbazine (DTIC) injection is due to its photodegradation product 5-diazoimidazole-4-carboxamide (Diazo-IC). The production of Diazo-IC can be decreased by protecting the drug from light. Furthermore, the production of Diazo-IC reportedly increases with time; however, there are no studies reporting the association between the injection preparation time and local venous pain caused by the DTIC injection. We evaluated the efficacy of the following: (1) method used to shorten the injection preparation time and (2) method used to change the diluting solution for DTIC. We found that shortening the injection preparation time tended to decrease the local venous pain expression due to DTIC, and Veen F decreased the production of Diazo-IC compared with the normal saline and 5% glucose solution. These results indicate that shortening the injection preparation time may be effective in preventing the local venous pain caused by the DTIC injection; moreover, using Veen F for DTIC may also reduce the pain.

Decision method for optimal selection of warehouse material handling strategies by production companies

NASA Astrophysics Data System (ADS)

Dobos, P.; Tamás, P.; Illés, B.

2016-11-01

Adequate establishment and operation of warehouse logistics determines the companies’ competitiveness significantly because it effects greatly the quality and the selling price of the goods that the production companies produce. In order to implement and manage an adequate warehouse system, adequate warehouse position, stock management model, warehouse technology, motivated work force committed to process improvement and material handling strategy are necessary. In practical life, companies have paid small attantion to select the warehouse strategy properly. Although it has a major influence on the production in the case of material warehouse and on smooth costumer service in the case of finished goods warehouse because this can happen with a huge loss in material handling. Due to the dynamically changing production structure, frequent reorganization of warehouse activities is needed, on what the majority of the companies react basically with no reactions. This work presents a simulation test system frames for eligible warehouse material handling strategy selection and also the decision method for selection.

Monitoring product safety in the postmarketing environment.

PubMed

Sharrar, Robert G; Dieck, Gretchen S

2013-10-01

The safety profile of a medicinal product may change in the postmarketing environment. Safety issues not identified in clinical development may be seen and need to be evaluated. Methods of evaluating spontaneous adverse experience reports and identifying new safety risks include a review of individual reports, a review of a frequency distribution of a list of the adverse experiences, the development and analysis of a case series, and various ways of examining the database for signals of disproportionality, which may suggest a possible association. Regulatory agencies monitor product safety through a variety of mechanisms including signal detection of the adverse experience safety reports in databases and by requiring and monitoring risk management plans, periodic safety update reports and postauthorization safety studies. The United States Food and Drug Administration is working with public, academic and private entities to develop methods for using large electronic databases to actively monitor product safety. Important identified risks will have to be evaluated through observational studies and registries.

Two Synthetic Methods for Preparation of Chiral Stationary Phases Using Crystalline Degradation Products of Vancomycin: Column Performance for Enantioseparation of Acidic and Basic Drugs.

PubMed

Abdollahpour, Assem; Heydari, Rouhollah; Shamsipur, Mojtaba

2017-07-01

Two chiral stationary phases (CSPs) based on crystalline degradation products (CDPs) of vancomycin by using different synthetic methods were prepared and compared. Crystalline degradation products of vancomycin were produced by hydrolytic loss of ammonia from vancomycin molecules. Performances of two chiral columns prepared with these degradation products were investigated using several acidic and basic drugs as model analytes. Retention and resolution of these analytes on the prepared columns, as two main parameters, in enantioseparation were studied. The results demonstrated that the stationary phase preparation procedure has a significant effect on the column performance. The resolving powers of prepared columns for enantiomers resolution were changed with the variation in vancomycin-CDP coverage on the silica support. Elemental analysis was used to monitor the surface coverage of silica support by vancomycin-CDP. The results showed that both columns can be successfully applied to chiral separation studies.

Nanomaterial Categorization for Assessing Risk Potential to Faciliate Regulatory Decision-Making

EPA Science Inventory

For nanotechnology to meet its potential as a game-changing and sustainable technology, it is important to ensure that the engineered nanomaterials (ENMs) and nano-enabled products that gain entry to the marketplace are safe and effective. Tools and methods are needed for regul...

[Evaluation of the influence of sterilization method on the stability of carboxymethyl cellulose wound dressing].

PubMed

Muselík, Jan; Wojnarová, Lenka; Masteiková, Ruta; Sopuch, Tomáš

2013-04-01

Carboxymethyl cellulose, especially its sodium salt, is a versatile pharmaceutical excipient. From a therapeutic point of view, sodium salt of carboxymethyl cellulose is used in the production of modern wound dressings to allow moist wound healing. Wound dressings must be sterile and stable throughout their shelf life and have to be able to withstand different temperature conditions. At the present time, a number of sterilization methods are available. In the case of polymeric materials, the selected sterilization process must not induce any changes in the polymer structure, such as polymer chains cleavage, changes in cross-linking, etc. This paper evaluates the influence of different sterilization methods (γ-radiation, β-radiation, ethylene oxide) on the stability of carboxymethyl cellulose and the results of long-term and accelerated stability testing. Evaluation of samples was performed using size-exclusion chromatography. The obtained results showed that ethylene oxide sterilization was the least aggressive variant of the sterilization methods tested. When the γ-radiation sterilization was used, the changes in the size of the carboxymethyl cellulose molecule occurred. In the course of accelerated and long term stability studies, no further degradation changes were observed, and thus sterilized samples are suitable for long term storage.

[Application HTST-heating of the mash and its influence on the aroma composition during the production of apple brandy (author's transl)].

PubMed

Schreier, P; Drawert, F; Steiger, G

1978-08-18

The influence of HTST-heating of the mash aroma composition during production of apply brandy has been investigated by means of gas chromatography and coupled gas chromatography--mass spectrometry. Starting from the apple aroma the changes in aroma components were studied quantitatively during the conventional production (without enzyme inhibition) as well as after HTST-heating (enzyme inactivation) of the mash. For this purpose 98 aroma compounds were determined in the course of mash production, fermentation and distillation. When employing HTST-heating the original aroma components of the apple particularly the fruit esters were present in appreciably higher concentrations in the mash as well as in the distillate than with the conventional production method. Simultaneously HTST-heating reduced the secondary aroma substances in mash and distillate which are formed with the conventional method by enzymatic-oxidative processes. In the unaged apple brandy obtained from HTST-treated mash lower amounts of lactates and higher concentrations of acetals were found compared with the conventionally produced distillate.

Spatiotemporal coupling of the tongue in amyotrophic lateral sclerosis.

PubMed

Kuruvilla, Mili S; Green, Jordan R; Yunusova, Yana; Hanford, Kathy

2012-12-01

The primary aim of the investigation was to identify deficits in spatiotemporal coupling between tongue regions in amyotrophic lateral sclerosis (ALS). The relations between disease-related changes in tongue movement patterns and speech intelligibility were also determined. Methods The authors recorded word productions from 11 individuals with ALS with mild, moderate, and severe dysarthria using an x-ray microbeam during word productions. A coupling index based on sliding window covariance was used to determine disease-related changes in the coupling between the tongue regions across each word. The results indicated decreased spatiotemporal coupling of mid-posterior tongue regions and reduced tongue speed in the ALS-moderate subgroup. Changes in the range of tongue coupling relations and speed of movement were highly correlated with speech intelligibility. These results provide new insights into the loss of lingual motor control due to ALS and suggest that measures of tongue performance may provide useful indicators of bulbar disease severity and progression.

ASSESSMENT OF FUNCTIONAL CHANGES TEAR PRODUCTION UNDER THE ACTION OF THE EYE DROPS ON THE BASE OF NATURAL MOLECULE OF ECTOINE AND ARTIFICIAL TEARS IN PATIENTS WITH DRY EYE SYNDROME ON THE BACKGROUND OF ENDOCRINE OPHTHALMOPATHY.

PubMed

Veselovskaya, N N; Zherebko, I B

Conducted a comparative analysis of functional changes in tear production in patients with dry eye syndrome and endocrine ophthalmopathy in the conditions of the long-term acting of preservative free medications based on natural substances. A total of 30 people, aged 35 to 53 years old with clinical manifestations of DES on the background of EO were divided on two groups. In I group eye drops of ectoine and in II - artificial tears were administered. The examination included general and specific methods. The term of follow up - 30 days. It was found that long-term use of preservative free eye drops based on ectoine leads to more expressive positive changes in the condition of the anterior surface of the eye and the secretion and quality of the tear.

Biosimilar structural comparability assessment by NMR: from small proteins to monoclonal antibodies

NASA Astrophysics Data System (ADS)

Japelj, Boštjan; Ilc, Gregor; Marušič, Jaka; Senčar, Jure; Kuzman, Drago; Plavec, Janez

2016-08-01

Biosimilar drug products must have a demonstrated similarity with respect to the reference product’s molecules in order to ensure both the effectiveness of the drug and the patients’ safety. In this paper the fusion framework of a highly sensitive NMR fingerprinting approach for conformational changes and mathematically-based biosimilarity metrics is introduced. The final goal is to translate the complex spectral information into biosimilarity scores, which are then used to estimate the degree of similarity between the biosimilar and the reference product. The proposed method was successfully applied to a small protein, i.e., filgrastim (neutropenia treatment), which is the first biosimilar approved in the United States, and a relatively large protein, i.e., monoclonal antibody rituximab (lymphoma treatment). This innovative approach introduces a new level of sensitivity to structural changes that are induced by, e.g., a small pH shift or other changes in the protein formulation.

Discrimination between glycosylation patterns of therapeutic antibodies using a microfluidic platform, MALDI-MS and multivariate statistics.

PubMed

Thuy, Tran Thi; Tengstrand, Erik; Aberg, Magnus; Thorsén, Gunnar

2012-11-01

Optimal glycosylation with respect to the efficacy, serum half-life time, and immunogenic properties is essential in the generation of therapeutic antibodies. The glycosylation pattern can be affected by several different parameters during the manufacture of antibodies and may change significantly over cultivation time. Fast and robust methods for determination of the glycosylation patterns of therapeutic antibodies are therefore needed. We have recently presented an efficient method for the determination of glycans on therapeutic antibodies using a microfluidic CD platform for sample preparation prior to matrix-assisted laser-desorption mass spectrometry analysis. In the present work, this method is applied to analyse the glycosylation patterns of three commercially available therapeutic antibodies and one intended for therapeutic use. Two of the antibodies produced in mouse myeloma cell line (SP2/0) and one produced in Chinese hamster ovary (CHO) cells exhibited similar glycosylation patterns but could still be readily differentiated from each other using multivariate statistical methods. The two antibodies with most similar glycosylation patterns were also studied in an assessment of the method's applicability for quality control of therapeutic antibodies. The method presented in this paper is highly automated and rapid. It can therefore efficiently generate data that helps to keep a production process within the desired design space or assess that an identical product is being produced after changes to the process. Copyright © 2012 Elsevier B.V. All rights reserved.

Spatially explicit estimation of heat stress-related impacts of climate change on the milk production of dairy cows in the United Kingdom.

PubMed

Fodor, Nándor; Foskolos, Andreas; Topp, Cairistiona F E; Moorby, Jon M; Pásztor, László; Foyer, Christine H

2018-01-01

Dairy farming is one the most important sectors of United Kingdom (UK) agriculture. It faces major challenges due to climate change, which will have direct impacts on dairy cows as a result of heat stress. In the absence of adaptations, this could potentially lead to considerable milk loss. Using an 11-member climate projection ensemble, as well as an ensemble of 18 milk loss estimation methods, temporal changes in milk production of UK dairy cows were estimated for the 21st century at a 25 km resolution in a spatially-explicit way. While increases in UK temperatures are projected to lead to relatively low average annual milk losses, even for southern UK regions (<180 kg/cow), the 'hottest' 25×25 km grid cell in the hottest year in the 2090s, showed an annual milk loss exceeding 1300 kg/cow. This figure represents approximately 17% of the potential milk production of today's average cow. Despite the potential considerable inter-annual variability of annual milk loss, as well as the large differences between the climate projections, the variety of calculation methods is likely to introduce even greater uncertainty into milk loss estimations. To address this issue, a novel, more biologically-appropriate mechanism of estimating milk loss is proposed that provides more realistic future projections. We conclude that South West England is the region most vulnerable to climate change economically, because it is characterised by a high dairy herd density and therefore potentially high heat stress-related milk loss. In the absence of mitigation measures, estimated heat stress-related annual income loss for this region by the end of this century may reach £13.4M in average years and £33.8M in extreme years.

Climate Change and Ecosystem Services Output Efficiency in Southern Loblolly Pine Forests.

PubMed

Susaeta, Andres; Adams, Damian C; Carter, Douglas R; Dwivedi, Puneet

2016-09-01

Forests provide myriad ecosystem services that are vital to humanity. With climate change, we expect to see significant changes to forests that will alter the supply of these critical services and affect human well-being. To better understand the impacts of climate change on forest-based ecosystem services, we applied a data envelopment analysis method to assess plot-level efficiency in the provision of ecosystem services in Florida natural loblolly pine (Pinus taeda L.) forests. Using field data for n = 16 loblolly pine forest plots, including inputs such as site index, tree density, age, precipitation, and temperatures for each forest plot, we assessed the relative plot-level production of three ecosystem services: timber, carbon sequestered, and species richness. The results suggested that loblolly pine forests in Florida were largely inefficient in the provision of these ecosystem services under current climatic conditions. Climate change had a small negative impact on the loblolly pine forests efficiency in the provision of ecosystem services. In this context, we discussed the reduction of tree density that may not improve ecosystem services production.

Climate Change and Ecosystem Services Output Efficiency in Southern Loblolly Pine Forests

NASA Astrophysics Data System (ADS)

Susaeta, Andres; Adams, Damian C.; Carter, Douglas R.; Dwivedi, Puneet

2016-09-01

Forests provide myriad ecosystem services that are vital to humanity. With climate change, we expect to see significant changes to forests that will alter the supply of these critical services and affect human well-being. To better understand the impacts of climate change on forest-based ecosystem services, we applied a data envelopment analysis method to assess plot-level efficiency in the provision of ecosystem services in Florida natural loblolly pine ( Pinus taeda L.) forests. Using field data for n = 16 loblolly pine forest plots, including inputs such as site index, tree density, age, precipitation, and temperatures for each forest plot, we assessed the relative plot-level production of three ecosystem services: timber, carbon sequestered, and species richness. The results suggested that loblolly pine forests in Florida were largely inefficient in the provision of these ecosystem services under current climatic conditions. Climate change had a small negative impact on the loblolly pine forests efficiency in the provision of ecosystem services. In this context, we discussed the reduction of tree density that may not improve ecosystem services production.

The regulation by phenolic compounds of soil organic matter dynamics under a changing environment.

PubMed

Min, Kyungjin; Freeman, Chris; Kang, Hojeong; Choi, Sung-Uk

2015-01-01

Phenolics are the most abundant plant metabolites and are believed to decompose slowly in soils compared to other soil organic matter (SOM). Thus, they have often been considered as a slow carbon (C) pool in soil dynamics models. Here, however, we review changes in our concept about the turnover rate of phenolics and quantification of different types of phenolics in soils. Also, we synthesize current research on the degradation of phenolics and their regulatory effects on decomposition. Environmental changes, such as elevated CO2, warming, nitrogen (N) deposition, and drought, could influence the production and form of phenolics, leading to a change in SOM dynamics, and thus we also review the fate of phenolics under environmental disturbances. Finally, we propose the use of phenolics as a tool to control rates of SOM decomposition to stabilize organic carbon in ecosystems. Further studies to clarify the role of phenolics in SOM dynamics should include improving quantification methods, elucidating the relationship between phenolics and soil microorganisms, and determining the interactive effects of combinations of environmental changes on the phenolics production and degradation and subsequent impact on SOM processing.

[The evaluation of organizational structure and work hygiene in milk kitchen centers in Poland on the basis of questionnaire].

PubMed

Weker, H; Rudzka-Kańtoch, Z

1999-01-01

On the basis of available publications and obligatory legal regulations regarding the organisation of collective feeding patterns in Social Service Health Centres a questionnaire study was established to examine the way milk kitchen function in Poland. The study covered 533 milk kitchen centres (in hospitals, orphanages and crèches) from February to December 1997. The afore-mentioned study analysed the general characteristics of the milk kitchen centre, its type of work, supervisory methods and the personnel's hygiene. From the results of this research it can be concluded that the organisational structure of the milk centres was appropriate, appliances and equipment in the majority centres were adequate but basis utensils were insufficient. It is obvious that dietetic feeding methods for this particular group of children are insufficiently applied. Only 22.2% of the centres apply the recommended proposals i.e. without boiling, without pasteurisation, ready for consumption when preparing, infant formulae, follow-up formulae and other mixed products. Work hygiene and health quality of production in the milk kitchen centres is subject to systematic controls by competent individuals from the State Sanitary Inspection services. In the years 1995-96, 72 samples of infant food that mainly came from hospital milk kitchen centres were taken due to the poor microbiological quality of the food. The considerable changes that have taken place over the last few years as far as infant feeding is concerned, for example, the promotion of breast-feeding, taking advantage of prepared dietetic products for infants (infant formulae, follow-up formulae, vegetable products, fruits, vegetable-meat products, cereal products) require changes at the organisational level of infant collective feeding which was confirmed by the afore-mentioned study.

Engineering Changes in Product Design - A Review

NASA Astrophysics Data System (ADS)

Karthik, K.; Janardhan Reddy, K., Dr

2016-09-01

Changes are fundamental to product development. Engineering changes are unavoidable and can arise at any phase of the product life cycle. The consideration of market requirements, customer/user feedbacks, manufacturing constraints, design innovations etc., turning them into viable products can be accomplished when product change is managed properly. In the early design cycle, informal changes are accepted. However, changes become formal when its complexity and cost increases, and as product matures. To maximize the market shares, manufacturers have to effectively and efficiently manage engineering changes by means of Configuration Control. The paper gives a broad overview about ‘Engineering Change Management’ (ECM) through configuration management and its implications in product design. The aim is to give an idea and understanding about the engineering changes in product design scenario to the new researchers. This paper elaborates the significant aspect of managing the engineering changes and the importance of ECM in a product life cycle.

Analysis of Garment Production Methods. Part 2: Comparison of Cost and Production between a Traditional Bundle System and Modular Manufacturing

DTIC Science & Technology

1992-02-01

configuration. We have spent the last year observing two firms as they experimented with modular manufacturing. The following report will track the progress of...the transitions as they I moved through the year . Incorporated into the analysis is the statistical interpretation of data collected from each firm, as...during the year . FEBRUARY The most noticeable change this month was the introduction of the new ergonomic chairs for the operators. Previously the

Digital stereoscopic cinema: the 21st century

NASA Astrophysics Data System (ADS)

Lipton, Lenny

2008-02-01

Over 1000 theaters in more than a dozen countries have been outfitted with digital projectors using the Texas Instruments DLP engine equipped to show field-sequential 3-D movies using the polarized method of image selection. Shuttering eyewear and advanced anaglyph products are also being deployed for image selection. Many studios are in production with stereoscopic films, and some have committed to producing their entire output of animated features in 3-D. This is a time of technology change for the motion picture industry.

Estimating economic value of agricultural water under changing conditions and the effects of spatial aggregation.

PubMed

Medellín-Azuara, Josué; Harou, Julien J; Howitt, Richard E

2010-11-01

Given the high proportion of water used for agriculture in certain regions, the economic value of agricultural water can be an important tool for water management and policy development. This value is quantified using economic demand curves for irrigation water. Such demand functions show the incremental contribution of water to agricultural production. Water demand curves are estimated using econometric or optimisation techniques. Calibrated agricultural optimisation models allow the derivation of demand curves using smaller datasets than econometric models. This paper introduces these subject areas then explores the effect of spatial aggregation (upscaling) on the valuation of water for irrigated agriculture. A case study from the Rio Grande-Rio Bravo Basin in North Mexico investigates differences in valuation at farm and regional aggregated levels under four scenarios: technological change, warm-dry climate change, changes in agricultural commodity prices, and water costs for agriculture. The scenarios consider changes due to external shocks or new policies. Positive mathematical programming (PMP), a calibrated optimisation method, is the deductive valuation method used. An exponential cost function is compared to the quadratic cost functions typically used in PMP. Results indicate that the economic value of water at the farm level and the regionally aggregated level are similar, but that the variability and distributional effects of each scenario are affected by aggregation. Moderately aggregated agricultural production models are effective at capturing average-farm adaptation to policy changes and external shocks. Farm-level models best reveal the distribution of scenario impacts. Copyright © 2009 Elsevier B.V. All rights reserved.

Verification and Validation in a Rapid Software Development Process

NASA Technical Reports Server (NTRS)

Callahan, John R.; Easterbrook, Steve M.

1997-01-01

The high cost of software production is driving development organizations to adopt more automated design and analysis methods such as rapid prototyping, computer-aided software engineering (CASE) tools, and high-level code generators. Even developers of safety-critical software system have adopted many of these new methods while striving to achieve high levels Of quality and reliability. While these new methods may enhance productivity and quality in many cases, we examine some of the risks involved in the use of new methods in safety-critical contexts. We examine a case study involving the use of a CASE tool that automatically generates code from high-level system designs. We show that while high-level testing on the system structure is highly desirable, significant risks exist in the automatically generated code and in re-validating releases of the generated code after subsequent design changes. We identify these risks and suggest process improvements that retain the advantages of rapid, automated development methods within the quality and reliability contexts of safety-critical projects.

Prediction of novel synthetic pathways for the production of desired chemicals.

PubMed

Cho, Ayoun; Yun, Hongseok; Park, Jin Hwan; Lee, Sang Yup; Park, Sunwon

2010-03-28

There have been several methods developed for the prediction of synthetic metabolic pathways leading to the production of desired chemicals. In these approaches, novel pathways were predicted based on chemical structure changes, enzymatic information, and/or reaction mechanisms, but the approaches generating a huge number of predicted results are difficult to be applied to real experiments. Also, some of these methods focus on specific pathways, and thus are limited to expansion to the whole metabolism. In the present study, we propose a system framework employing a retrosynthesis model with a prioritization scoring algorithm. This new strategy allows deducing the novel promising pathways for the synthesis of a desired chemical together with information on enzymes involved based on structural changes and reaction mechanisms present in the system database. The prioritization scoring algorithm employing Tanimoto coefficient and group contribution method allows examination of structurally qualified pathways to recognize which pathway is more appropriate. In addition, new concepts of binding site covalence, estimation of pathway distance and organism specificity were taken into account to identify the best synthetic pathway. Parameters of these factors can be evolutionarily optimized when a newly proven synthetic pathway is registered. As the proofs of concept, the novel synthetic pathways for the production of isobutanol, 3-hydroxypropionate, and butyryl-CoA were predicted. The prediction shows a high reliability, in which experimentally verified synthetic pathways were listed within the top 0.089% of the identified pathway candidates. It is expected that the system framework developed in this study would be useful for the in silico design of novel metabolic pathways to be employed for the efficient production of chemicals, fuels and materials.

Norway's historical and projected water balance in TWh

NASA Astrophysics Data System (ADS)

Haddeland, Ingjerd; Holmqvist, Erik

2015-04-01

Hydroelectric power production is closely linked to the water cycle, and variations in power production numbers reflect variations in weather. The expected climate changes will influence electricity supply through changes in annual and seasonal inflow of water to hydropower reservoirs. In Norway, more than 95 percent of the electricity production is from hydroelectric plants, and industry linked to hydropower has been an important part of the society for more than a century. Reliable information on historical and future available water resources is hence of crucial importance both for short and long-term planning and adaptation purposes in the hydropower sector. Traditionally, the Multi-area Power-market Simulator (EMPS) is used for modelling hydropower production in Norway. However, due to the models' high level of details and computational demand, this model is only used for historical analyses and a limited number of climate projections. A method has been developed that transfers water fluxes (mm day-1) and states (mm) into energy units (GWh mm-1), based on hydrological modelling of a limited number of catchments representing reservoir inflow to more than 700 hydropower plants in Norway. The advantages of using the conversion factor method, compared to EMPS, are its simplicity and low computational requirements. The main disadvantages are that it does not take into account flood losses and the time lag between inflow and power production. The method is used operationally for weekly and seasonal energy forecasts, and has proven successful at the range of results obtained for reproducing historical hydropower production numbers. In hydropower energy units, mean annual precipitation for the period 1981-2010 is estimated at 154 TWh year-1. On average, 24 TWh year-1 is lost through evapotranspiration, meaning runoff equals 130 TWh year-1. There are large interannual variations, and runoff available for power production ranges from 91 to 165 TWh year-1. The snow pack on average peaks in the middle of April at 54 TWh, ranging from 33 to 84 TWh. Given its simplicity, the method of using conversion factors is a time and computational efficient way of producing projections of hydropower production potential from an ensemble of climate model simulations. Regional climate model (RCM) projections are obtained from Euro-Cordex, and precipitation and temperature are bias corrected to observation based datasets at 1 km2. Preliminary results, based on an ensemble consisting of 16 members (8 RCMs, RCP4.5 and RCP8.5) and transient hydrological simulations for the period 1981-2100, indicate an increase in hydroelectric power production of up to 10 percent by the end of the century, given the effect of climate change alone. The expected increase in temperature causes a negative trend for the energy potential stored in the annual maximum snow pack. At the end of the century (2071-2100), the maximum snow pack holds 43 TWh and 30 TWh for RCP4.5 and RCP8.5, respectively, compared to 54 TWh in 1981-2010. The substantial decrease in the peak snow pack is reflected in the seasonally more even inflow to reservoirs expected in the next decades.

Application of RNAMlet to surface defect identification of steels

NASA Astrophysics Data System (ADS)

Xu, Ke; Xu, Yang; Zhou, Peng; Wang, Lei

2018-06-01

As three main production lines of steels, continuous casting slabs, hot rolled steel plates and cold rolled steel strips have different surface appearances and are produced at different speeds of their production lines. Therefore, the algorithms for the surface defect identifications of the three steel products have different requirements for real-time and anti-interference. The existing algorithms cannot be adaptively applied to surface defect identification of the three steel products. A new method of adaptive multi-scale geometric analysis named RNAMlet was proposed. The idea of RNAMlet came from the non-symmetry anti-packing pattern representation model (NAM). The image is decomposed into a set of rectangular blocks asymmetrically according to gray value changes of image pixels. Then two-dimensional Haar wavelet transform is applied to all blocks. If the image background is complex, the number of blocks is large, and more details of the image are utilized. If the image background is simple, the number of blocks is small, and less computation time is needed. RNAMlet was tested with image samples of the three steel products, and compared with three classical methods of multi-scale geometric analysis, including Contourlet, Shearlet and Tetrolet. For the image samples with complicated backgrounds, such as continuous casting slabs and hot rolled steel plates, the defect identification rate obtained by RNAMlet was 1% higher than other three methods. For the image samples with simple backgrounds, such as cold rolled steel strips, the computation time of RNAMlet was one-tenth of the other three MGA methods, while the defect identification rates obtained by RNAMlet were higher than the other three methods.

Planetary-scale surface water detection from space

NASA Astrophysics Data System (ADS)

Donchyts, G.; Baart, F.; Winsemius, H.; Gorelick, N.

2017-12-01

Accurate, efficient and high-resolution methods of surface water detection are needed for a better water management. Datasets on surface water extent and dynamics are crucial for a better understanding of natural and human-made processes, and as an input data for hydrological and hydraulic models. In spite of considerable progress in the harmonization of freely available satellite data, producing accurate and efficient higher-level surface water data products remains very challenging. This presentation will provide an overview of existing methods for surface water extent and change detection from multitemporal and multi-sensor satellite imagery. An algorithm to detect surface water changes from multi-temporal satellite imagery will be demonstrated as well as its open-source implementation (http://aqua-monitor.deltares.nl). This algorithm was used to estimate global surface water changes at high spatial resolution. These changes include climate change, land reclamation, reservoir construction/decommissioning, erosion/accretion, and many other. This presentation will demonstrate how open satellite data and open platforms such as Google Earth Engine have helped with this research.

Collaboration Across Worldviews: Managers and Scientists on Hawai'i Island Utilize Knowledge Coproduction to Facilitate Climate Change Adaptation.

PubMed

Laursen, Scott; Puniwai, Noelani; Genz, Ayesha S; Nash, Sarah A B; Canale, Lisa K; Ziegler-Chong, Sharon

2018-05-30

Complex socio-ecological issues, such as climate change have historically been addressed through technical problem solving methods. Yet today, climate science approaches are increasingly accounting for the roles of diverse social perceptions, experiences, cultural norms, and worldviews. In support of this shift, we developed a research program on Hawai'i Island that utilizes knowledge coproduction to integrate the diverse worldviews of natural and cultural resource managers, policy professionals, and researchers within actionable science products. Through their work, local field managers regularly experience discrete land and waterscapes. Additionally, in highly interconnected rural communities, such as Hawai'i Island, managers often participate in the social norms and values of communities that utilize these ecosystems. Such local manager networks offer powerful frameworks within which to co-develop and implement actionable science. We interviewed a diverse set of local managers with the aim of incorporating their perspectives into the development of a collaborative climate change research agenda that builds upon existing professional networks utilized by managers and scientists while developing new research products. We report our manager needs assessment, the development process of our climate change program, our interactive forums, and our ongoing research products. Our needs assessment showed that the managers' primary source of information were other professional colleagues, and our in-person forums informed us that local managers are very interested in interacting with a wider range of networks to build upon their management capacities. Our initial programmatic progress suggests that co-created research products and in-person forums strengthen the capacities of local managers to adapt to change.

Improvement of the facial evenness of leave-on skincare products by a modified application method in Chinese women.

PubMed

Zou, Y; Wang, X; Fan, G

2015-04-01

To understand the habits of Chinese women applying leave-on skincare products (LOSCP) and to improve female facial evenness of anti-ageing cosmetics through modifying facial skincare smear ways. A questionnaire on the method of applying LOSCP was distributed to 60 women with habit of using LOSCP. Their facial images before and after applying LOSCP were taken, and their positioning and grey value were used to analyse the effects of different applying methods on the uniformity of facial LOSCP. LOSCP including anti-ageing cosmetics have been widely used among Chinese women for a long time. However, some women do not concern how to properly apply LOSCP. In our survey, the main focal points of the face are forehead, malar region, cheek, mouth corners and chin when they looking into the mirror, and mouth corners and inner canthus are often overlooked when applying cosmetic products. The image analysis found that after applying the LOSCP, the greyscale of the forehead, glabella, malar region, upper lip region and jaw changed significantly whereas that of canthus, mouth corners and lateral cheek region was not significantly different. Applying an improved smear method (11-point method)could significantly increase the grey values of various facial areas. The way of Chinese women applying LOSCP may result in facial unevenness of skin products. By improving facial skincare smear method, one can make the products even in all facial areas, thereby ensuring the efficacy of anti-ageing cosmetics. Thus, further improvement and education regarding skincare is required. © 2014 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

Projecting water yield and ecosystem productivity across the United States by linking an ecohydrological model to WRF dynamically downscaled climate data

NASA Astrophysics Data System (ADS)

Sun, Shanlei; Sun, Ge; Cohen, Erika; McNulty, Steven G.; Caldwell, Peter V.; Duan, Kai; Zhang, Yang

2016-03-01

Quantifying the potential impacts of climate change on water yield and ecosystem productivity is essential to developing sound watershed restoration plans, and ecosystem adaptation and mitigation strategies. This study links an ecohydrological model (Water Supply and Stress Index, WaSSI) with WRF (Weather Research and Forecasting Model) using dynamically downscaled climate data of the HadCM3 model under the IPCC SRES A2 emission scenario. We evaluated the future (2031-2060) changes in evapotranspiration (ET), water yield (Q) and gross primary productivity (GPP) from the baseline period of 1979-2007 across the 82 773 watersheds (12-digit Hydrologic Unit Code level) in the coterminous US (CONUS). Across the CONUS, the future multi-year means show increases in annual precipitation (P) of 45 mm yr-1 (6 %), 1.8° C increase in temperature (T), 37 mm yr-1 (7 %) increase in ET, 9 mm yr-1 (3 %) increase in Q, and 106 gC m-2 yr-1 (9 %) increase in GPP. We found a large spatial variability in response to climate change across the CONUS 12-digit HUC watersheds, but in general, the majority would see consistent increases all variables evaluated. Over half of the watersheds, mostly found in the northeast and the southern part of the southwest, would see an increase in annual Q (> 100 mm yr-1 or 20 %). In addition, we also evaluated the future annual and monthly changes of hydrology and ecosystem productivity for the 18 Water Resource Regions (WRRs) or two-digit HUCs. The study provides an integrated method and example for comprehensive assessment of the potential impacts of climate change on watershed water balances and ecosystem productivity at high spatial and temporal resolutions. Results may be useful for policy-makers and land managers to formulate appropriate watershed-specific strategies for sustaining water and carbon sources in the face of climate change.

Plant tolerance to high temperature in a changing environment: scientific fundamentals and production of heat stress-tolerant crops

PubMed Central

Bita, Craita E.; Gerats, Tom

2013-01-01

Global warming is predicted to have a general negative effect on plant growth due to the damaging effect of high temperatures on plant development. The increasing threat of climatological extremes including very high temperatures might lead to catastrophic loss of crop productivity and result in wide spread famine. In this review, we assess the impact of global climate change on the agricultural crop production. There is a differential effect of climate change both in terms of geographic location and the crops that will likely show the most extreme reductions in yield as a result of expected extreme fluctuations in temperature and global warming in general. High temperature stress has a wide range of effects on plants in terms of physiology, biochemistry and gene regulation pathways. However, strategies exist to crop improvement for heat stress tolerance. In this review, we present recent advances of research on all these levels of investigation and focus on potential leads that may help to understand more fully the mechanisms that make plants tolerant or susceptible to heat stress. Finally, we review possible procedures and methods which could lead to the generation of new varieties with sustainable yield production, in a world likely to be challenged both by increasing population, higher average temperatures and larger temperature fluctuations. PMID:23914193

Plant tolerance to high temperature in a changing environment: scientific fundamentals and production of heat stress-tolerant crops.

PubMed

Bita, Craita E; Gerats, Tom

2013-01-01

Global warming is predicted to have a general negative effect on plant growth due to the damaging effect of high temperatures on plant development. The increasing threat of climatological extremes including very high temperatures might lead to catastrophic loss of crop productivity and result in wide spread famine. In this review, we assess the impact of global climate change on the agricultural crop production. There is a differential effect of climate change both in terms of geographic location and the crops that will likely show the most extreme reductions in yield as a result of expected extreme fluctuations in temperature and global warming in general. High temperature stress has a wide range of effects on plants in terms of physiology, biochemistry and gene regulation pathways. However, strategies exist to crop improvement for heat stress tolerance. In this review, we present recent advances of research on all these levels of investigation and focus on potential leads that may help to understand more fully the mechanisms that make plants tolerant or susceptible to heat stress. Finally, we review possible procedures and methods which could lead to the generation of new varieties with sustainable yield production, in a world likely to be challenged both by increasing population, higher average temperatures and larger temperature fluctuations.

[Analysis of morphologic classifications of testicular lesions in male sterility].

PubMed

Lysenko, A I; Kirpatovskiĭ, I D

1991-01-01

An analysis of the authors' own data based on the examination of 697 testis biopsies is given. The material is subdivided into two groups depending on the presence or absence of germ cells: 1) hypospermatogenesis and 2) aspermatogenesis. Hypospermatogenesis is related to any tubule changes resulting in the under-production of spermatozoa. Criteria of tubule changes and a method for determination of the hypospermatogenesis degree are given. Insolvency of some existing histologic classifications is shown.

Towards automatic planning for manufacturing generative processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

CALTON,TERRI L.

2000-05-24

Generative process planning describes methods process engineers use to modify manufacturing/process plans after designs are complete. A completed design may be the result from the introduction of a new product based on an old design, an assembly upgrade, or modified product designs used for a family of similar products. An engineer designs an assembly and then creates plans capturing manufacturing processes, including assembly sequences, component joining methods, part costs, labor costs, etc. When new products originate as a result of an upgrade, component geometry may change, and/or additional components and subassemblies may be added to or are omitted from themore » original design. As a result process engineers are forced to create new plans. This is further complicated by the fact that the process engineer is forced to manually generate these plans for each product upgrade. To generate new assembly plans for product upgrades, engineers must manually re-specify the manufacturing plan selection criteria and re-run the planners. To remedy this problem, special-purpose assembly planning algorithms have been developed to automatically recognize design modifications and automatically apply previously defined manufacturing plan selection criteria and constraints.« less

Animal use in the chemical and product manufacturing sectors - can the downtrend continue?

PubMed

Curren, Rodger

2009-12-01

During the 1990s and early 2000s, a number of manufacturing companies in the cosmetic, personal care and household product industries were able to substantially reduce their use of animals for testing (or to not use animals in the first place). These reductions were almost always the result of significant financial contributions to either direct, in-house alternatives research, or to support personnel whose duties were to understand and apply the current state-of-the-art for in vitro testing. They occurred almost exclusively in non-regulatory areas, and primarily involved acute topical toxicities. Over the last few years, the reduction in animal use has been much less dramatic, because some companies are still reluctant to change from the traditional animal studies, because systemic, repeat-dose toxicity is more difficult to model in vitro, and because many products still require animal testing for regulatory approval. Encouragingly, we are now observing an increased acceptance of non-animal methods by regulatory agencies. This is due to mounting scientific evidence from larger databases, agreement by companies to share data and testing strategies with regulatory agencies, and a focus on smaller domains of applicability. These changes, along with new emphasis and financial support for addressing systemic toxicities, promise to provide additional possibilities for industry to replace animals with in vitro methods, alone or in combination with in silico methods. However, the largest advance will not occur until more companies commit to using the non-animal test strategies that are currently available. 2009 FRAME.

Prospective data mining of six products in the US FDA Adverse Event Reporting System: disposition of events identified and impact on product safety profiles.

PubMed

Bailey, Steven; Singh, Ajay; Azadian, Robert; Huber, Peter; Blum, Michael

2010-02-01

The use of data mining has increased among regulators and pharmaceutical companies. The incremental value of data mining as an adjunct to traditional pharmacovigilance methods has yet to be demonstrated. Specifically, the utility in identifying new safety signals and the resources required to do so have not been elucidated. To analyse the number and types of disproportionately reported product-event combinations (DRPECs), as well as the final disposition of each, in order to understand the potential utility and resource implications of routinely conducting data mining in the US FDA Adverse Event Reporting System (AERS). We generated DRPECs from AERS for six of Wyeth's products, prospectively tracked their dispositions and evaluated the appropriate DRPECs in the company's safety database. We chose EB05 (the lower bound of the 90% confidence interval around the Empirical Bayes Geometric Mean) > or =2 as the appropriate metric, employing stratification based on age, sex and year of report. A total of 861 DRPECs were identified - the average number of DRPECs was 144 per product. The proportion of unique preferred terms (PTs) in AERS for each drug with an EB05 > or =2 was similar across the six products (5.1-8.5%). Overall, 64.0% (551) of the DRPECs were closed after the initial screening (44.8% labelled, 14.3% indication related, 4.9% non-interpretable). An additional 9.9% (85) had been reviewed within the prior year and were not further reviewed. The remaining 26.1% (225) required full case review. After review of all pertinent reports and additional data, it was determined which of the DRPECs necessitated a formal review by the company's ongoing Safety Review Team (SRT) process. In total, 3.6% (31/861) of the DRPECs, yielding 16 medical concepts, were reviewed by the SRT, leading to seven labelling changes. These labelling changes involved 1.9% of all DRPECs generated. Four of the six compounds reviewed as part of this pilot had an identified labelling change. The workload required for this pilot, which was driven primarily by those DRPECs requiring review, was extensive, averaging 184 hours per product. The number of DRPECs identified for each drug approximately correlated with the number of unique PTs in the database. Over one-half of DRPECs were either labelled as per the company's reference safety information (RSI) or were under review after identification by traditional pharmacovigilance activities, suggesting that for marketed products these methods do identify adverse events detected by traditional pharmacovigilance methods. Approximately three-quarters of the 861 DRPECs identified were closed without case review after triage. Of the approximately one-quarter of DRPECs that required formal case review, seven resulted in an addition to the RSI for the relevant products. While this pilot does not allow us to comment on the utility of routine data mining for all products, it is significant that several new safety concepts were identified through this prospective exercise.

Detecting dryland degradation through the use of Time Series Segmentation and Residual Trend analysis (TSS-RESTREND)

NASA Astrophysics Data System (ADS)

Burrell, A. L.; Evans, J. P.; Liu, Y.

2017-12-01

Dryland degradation is an issue of international significance as dryland regions play a substantial role in global food production. Remotely sensed data provide the only long term, large scale record of changes within dryland ecosystems. The Residual Trend, or RESTREND, method is applied to satellite observations to detect dryland degradation. Whilst effective in most cases, it has been shown that the RESTREND method can fail to identify degraded pixels if the relationship between vegetation and precipitation has broken-down as a result of severe or rapid degradation. This study presents an extended version of the RESTREND methodology that incorporates the Breaks For Additive Seasonal and Trend method to identify step changes in the time series that are related to significant structural changes in the ecosystem, e.g. land use changes. When applied to Australia, this new methodology, termed Time Series Segmentation and Residual Trend analysis (TSS-RESTREND), was able to detect degradation in 5.25% of pixels compared to only 2.0% for RESTREND alone. This modified methodology was then assessed in two regions with known histories of degradation where it was found to accurately capture both the timing and directionality of ecosystem change.

Trends in Trans Fatty Acids Reformulations of US Supermarket and Brand-Name Foods From 2007 Through 2011

PubMed Central

Otite, Fadar O.; Jacobson, Michael F.; Dahmubed, Aspan

2013-01-01

Introduction Although some US food manufacturers have reduced trans fatty acids (TFA) in their products, it is unknown how much TFA is being reduced, whether pace of reformulation has changed over time, or whether reformulations vary by food type or manufacturer. Methods In 2007, we identified 360 brand-name products in major US supermarkets that contained 0.5 g TFA or more per serving. In 2008, 2010, and 2011, product labels were re-examined to determine TFA content; ingredients lists were also examined in 2011 for partially hydrogenated vegetable oils (PHVO). We assessed changes in TFA content among the 270 products sold in all years between 2007 and 2011 and conducted sensitivity analyses on the 90 products discontinued after 2007. Results By 2011, 178 (66%) of the 270 products had reduced TFA content. Most reformulated products (146 of 178, 82%) reduced TFA to less than 0.5 g per serving, although half of these 146 still contained PHVO. Among all 270 products, mean TFA content decreased 49% between 2007 and 2011, from 1.9 to 0.9 g per serving. Yet, mean TFA reduction slowed over time, from 30.3% (2007–2008) to 12.1% (2008–2010) to 3.4% (2010–2011) (P value for trend < .001). This slowing pace was due to both fewer reformulations among TFA-containing products at start of each period and smaller TFA reductions among reformulated products. Reformulations also varied substantially by both food category and manufacturer, with some eliminating or nearly eliminating TFA and others showing no significant changes. Sensitivity analyses were similar to main findings. Conclusions Some US products and food manufacturers have made progress in reducing TFA, but substantial variation exists by food type and by parent company, and overall progress has significantly slowed over time. Because TFA consumption is harmful even at low levels, our results emphasize the need for continued efforts toward reformulating or discontinuing foods to eliminate PHVO. PMID:23701722

An approach to including protein quality when assessing the net contribution of livestock to human food supply.

PubMed

Ertl, P; Knaus, W; Zollitsch, W

2016-11-01

The production of protein from animal sources is often criticized because of the low efficiency of converting plant protein from feeds into protein in the animal products. However, this critique does not consider the fact that large portions of the plant-based proteins fed to animals may be human-inedible and that the quality of animal proteins is usually superior as compared with plant proteins. The aim of the present study was therefore to assess changes in protein quality in the course of the transformation of potentially human-edible plant proteins into animal products via livestock production; data from 30 Austrian dairy farms were used as a case study. A second aim was to develop an approach for combining these changes with quantitative aspects (e.g. with the human-edible feed conversion efficiency (heFCE), defined as kilogram protein in the animal product divided by kilogram potentially human-edible protein in the feeds). Protein quality of potentially human-edible inputs and outputs was assessed using the protein digestibility-corrected amino acid score and the digestible indispensable amino acid score, two methods proposed by the Food and Agriculture Organization of the United Nations to describe the nutritional value of proteins for humans. Depending on the method used, protein scores were between 1.40 and 1.87 times higher for the animal products than for the potentially human-edible plant protein input on a barn-gate level (=protein quality ratio (PQR)). Combining the PQR of 1.87 with the heFCE for the same farms resulted in heFCE×PQR of 2.15. Thus, considering both quantity and quality, the value of the proteins in the animal products for human consumption (in this case in milk and beef) is 2.15 times higher than that of proteins in the potentially human-edible plant protein inputs. The results of this study emphasize the necessity of including protein quality changes resulting from the transformation of plant proteins to animal proteins when evaluating the net contribution of livestock to the human food supply. Furthermore, these differences in protein quality might also need to be considered when choosing a functional unit for the assessment of environmental impacts of the production of different proteins.

Improvement of the customer satisfaction through Quality Assurance Matrix and QC-Story methods: A case study from automotive industry

NASA Astrophysics Data System (ADS)

Sicoe, G. M.; Belu, N.; Rachieru, N.; Nicolae, E. V.

2017-10-01

Presently, in the automotive industry, the tendency is to adapt permanently to the changes and introduce the market tendency in the new products that leads of the customer satisfaction. Many quality techniques were adopted in this field to continuous improvement of product and process quality and advantages were also gained. The present paper has focused on possibilities that offers the use of Quality Assurance Matrix (QAM) and Quality Control Story (QC Story) to provide largest protection against nonconformities in the production process, throughout a case study in the automotive industry. There is a direct relationship from the QAM to a QC Story analysis. The failures identified using QAM are treated with QC Story methodology. Using this methods, will help to decrease the PPM values and will increase the quality performance and the customer satisfaction.

Drying-induced physico-chemical changes in cranberry products.

PubMed

Michalska, Anna; Wojdyło, Aneta; Honke, Joanna; Ciska, Ewa; Andlauer, Wilfried

2018-02-01

Sugar-free cranberry juice (XAD) and juice with 15% of maltodextrin were dried by freeze-, vacuum and spray drying methods. Total phenolics (589-6435mg/kg dry matter) including 5 flavonols, 3 phenolic acids, 2 procyanidins and 5 anthocyanins were stronger affected by juice formulation than by drying methods. Spray drying of juice, regardless of its formulation, was competitive to freeze drying in terms of polyphenols' retention. Increase in temperature up to 100°C during vacuum drying of XAD extracts resulted in degradation of polyphenolics (down to 4%), except chlorogenic acid. Its content increased with rise in temperature and accelerated hydroxymethylfurfural formation. The stronger the impact of drying, the more chlorogenic acid is present in cranberry products. In all powders analysed, formation of furoylmethyl amino acids was noted. Antioxidant capacity of cranberry products was influenced by juice formulation and was linked to content of polyphenols. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development of molecular methods to detect Macrophomina phaseolina from strawberry plants and soil

USDA-ARS?s Scientific Manuscript database

Macrophomina phaseolina is a broad-host range fungus that shows some degree of host preference on strawberry, and causes symptoms including charcoal rot and root rot. Recently, this pathogen has impacted strawberry production as fumigation practices have changed, leaving many growers in California a...

Identifying and responding to factors that can affect egg quality and appearance

USDA-ARS?s Scientific Manuscript database

Many factors can influence egg quality and appearance. These factors will vary depending upon the housing environment, genetics, drugs, feed ingredients, or chemicals used in agriculture. As egg production methods become more varied—for example, changing from cage to free range—and as layer strains ...

Design Research Methods for Future Mapping

ERIC Educational Resources Information Center

Malhotra, Sugandh; Das, Lalit K.; Chariar, V. M.

2014-01-01

Although a strategy for business innovation is to turn a concept into something that's desirable, viable, commercially successful and that which adds value to people's lives but in the fast changing world, we are seeing weakening of relationship between product, user and the environment, thereby causing sustainability issues. A concrete futuristic…

Life Cycle Assessment as an Environmental Management Tool

EPA Science Inventory

Listed by Time Magazine as the method behind calculating “Ecological Intelligence,” one of “10 Ideas Changing the World Right Now” (March 23, 2009), Life Cycle Assessment (LCA) is the tool that is used to understand the environmental impacts of the products we make and sell. Jo...

Changes in Articulator Movement Variability during Phonemic Development: A Longitudinal Study

ERIC Educational Resources Information Center

Grigos, Maria I.

2009-01-01

Purpose: The present study explored articulator movement variability during voicing contrast acquisition. The purpose was to examine whether oral articulator movement trajectories associated with the production of voiced/voiceless bilabial phonemes in children became less variable over time. Method: Jaw, lower lip, and upper lip movements were…

Spatiotemporal Coupling of the Tongue in Amyotrophic Lateral Sclerosis

ERIC Educational Resources Information Center

Kuruvilla, Mili S.; Green, Jordan R.; Yunusova, Yana; Hanford, Kathy

2012-01-01

Purpose: The primary aim of the investigation was to identify deficits in spatiotemporal coupling between tongue regions in amyotrophic lateral sclerosis (ALS). The relations between disease-related changes in tongue movement patterns and speech intelligibility were also determined. Methods: The authors recorded word productions from 11…

Soil modulates the effect of precipitation seasonality on bioenergy crop production

USDA-ARS?s Scientific Manuscript database

Background/Questions/Methods Future climate change scenarios remain uncertain with respect to precipitation amounts and variability. In the U.S. Great Plains, spring precipitation is expected to decrease in the lower Great Plains but increase 20%–40% in the upper Mississippi Valley, suggesting pot...

Rethinking Multicultural Group Work as Intercultural Learning

ERIC Educational Resources Information Center

Reid, Robin; Garson, Kyra

2017-01-01

This article presents our findings of an exploration of students' perceptions of multicultural group work when specific changes in pedagogy and methods of evaluation were made to include the processes students navigate, instead of merely the end product of their collaboration. Shifting demographics and increasing cultural diversity in higher…

Vulnerability of field crops to midcentury temperature changes and yield effects in the Southwestern USA

USDA-ARS?s Scientific Manuscript database

Increased temperatures in the Southwestern United States will impact future crop production via multiple pathways. We used four methods to provide an illustrative analysis of midcentury temperature impacts to eight field crops. By midcentury, cropland area thermally suitable for maize cultivation is...

Lyophilization and Reconstitution of Reverse-Osmosis Concentrated Natural Organic Matter from a Drinking Water Source

EPA Science Inventory

Disinfection by-product (DBP) research can be complicated by difficulties in shipping large water quantities and changing natural organic matter (NOM) characteristics over time. To overcome these issues, it is advantageous to have a reliable method for concentrating NOM with min...

Growth and physiological plasticity among differentially adapted genotypes of a widespread C4 grass under altered precipitation

USDA-ARS?s Scientific Manuscript database

Background/Question/Methods Variation in precipitation expected with climate change may impact plant fitness and alter ecosystem dynamics by modifying species phenology, productivity, and physiology. Species responses to varied precipitation will depend in part on plastic responses of genotypes ad...

30 CFR 250.1629 - Additional production and fuel gas system requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... structure. (4) Fire- and gas-detection system. (i) Fire (flame, heat, or smoke) sensors shall be installed... explosive limit. One approved method of providing adequate ventilation is a change of air volume each 5... detection systems shall be capable of continuous monitoring. Fire-detection systems and portions of...

30 CFR 250.1629 - Additional production and fuel gas system requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... structure. (4) Fire- and gas-detection system. (i) Fire (flame, heat, or smoke) sensors shall be installed... explosive limit. One approved method of providing adequate ventilation is a change of air volume each 5... detection systems shall be capable of continuous monitoring. Fire-detection systems and portions of...

Growth-climate relationships across topographic gradients in the northern Great Lakes

Treesearch

S.F. Dymond; A.W. D' Amato; Randy Kolka; P.V. Bolstad; Stephen Sebestyen; J.B. Bradford

2016-01-01

Climatic conditions exert important control over the growth, productivity, and distribution of forests, and characterizing these relationships is essential for understanding how forest ecosystems will respond to climate change. We used dendrochronological methods to develop climate–growth relationships for two dominant species, Populus tremuloides...

Food Buying Guide for Child Nutrition Programs. Revised.

ERIC Educational Resources Information Center

Davis, Dorothy W.; And Others

This guide is based on the latest federal regulations and meal pattern requirements for the National School Lunch and Breakfast Programs. It considers current food production and marketing techniques, packaging methods, grading standards, and changing food habits in the American population. The guide gives average yield information on over 600…

Railroad Technology and Manpower in the 1970's.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

This government bulletin examines changes in technology in the railroad industry, projects their impact on productivity, employment, and occupational requirements, and discusses methods of vocational adjustment. As one of a series of reports required by the Manpower Development and Training Act, the study was based on discussions with company,…

Stability of Ensemble Models Predicts Productivity of Enzymatic Systems

DOE PAGES

Theisen, Matthew K.; Lafontaine Rivera, Jimmy G.; Liao, James C.

2016-03-10

Stability in a metabolic system may not be obtained if incorrect amounts of enzymes are used. Without stability, some metabolites may accumulate or deplete leading to the irreversible loss of the desired operating point. Even if initial enzyme amounts achieve a stable steady state, changes in enzyme amount due to stochastic variations or environmental changes may move the system to the unstable region and lose the steady-state or quasi-steady-state flux. This situation is distinct from the phenomenon characterized by typical sensitivity analysis, which focuses on the smooth change before loss of stability. Here we show that metabolic networks differ significantlymore » in their intrinsic ability to attain stability due to the network structure and kinetic forms, and that after achieving stability, some enzymes are prone to cause instability upon changes in enzyme amounts. We use Ensemble Modelling for Robustness Analysis (EMRA) to analyze stability in four cell-free enzymatic systems when enzyme amounts are changed. Loss of stability in continuous systems can lead to lower production even when the system is tested experimentally in batch experiments. The predictions of instability by EMRA are supported by the lower productivity in batch experimental tests. Finally, the EMRA method incorporates properties of network structure, including stoichiometry and kinetic form, but does not require specific parameter values of the enzymes.« less

Operational Changes in a Shared Resource Laboratory with the Use of a Product Lifecycle Management Approach: A Case Study.

PubMed

Hexley, Philip; Smith, Victoria; Wall, Samantha

2016-04-01

Shared Resource Laboratories (SRLs) provide investigators access to necessary scientific and resource expertise to leverage complex technologies fully for advancing high-quality biomedical research in a cost-effective manner. At the University of Nebraska Medical Center, the Flow Cytometry Research Facility (FCRF) offered access to exceptional technology, but the methods of operation were outdated and unsustainable. Whereas technology has advanced and the institute has expanded, the operations at the facility remained unchanged for 35 yr. To rectify this, at the end of 2013, we took a product lifecycle management approach to affect large operational changes and align the services offered with the SRL goal of education, as well as to provide service to researchers. These disruptive operational changes took over 10 mo to complete and allowed for independent end-user acquisition of flow cytometry data. The results have been monitored for the past 12 mo. The operational changes have had a positive impact on the quality of research, increased investigator-facility interaction, reduced stress of facility staff, and increased overall use of the resources. This product lifecycle management approach to facility operations allowed us to conceive of, design, implement, and monitor effectively the changes at the FCRF. This approach should be considered by SRL management when faced with the need for operationally disruptive measures.

Community-based Participatory Process – Climate Change and Health Adaptation Program for Northern First Nations and Inuit in Canada

PubMed Central

Peace, Diane McClymont; Myers, Erin

2012-01-01

Objectives Health Canada's Program for Climate Change and Health Adaptation in Northern First Nation and Inuit Communities is unique among Canadian federal programs in that it enables community-based participatory research by northern communities. Study design The program was designed to build capacity by funding communities to conduct their own research in cooperation with Aboriginal associations, academics, and governments; that way, communities could develop health-related adaptation plans and communication materials that would help in adaptation decision-making at the community, regional, national and circumpolar levels with respect to human health and a changing environment. Methods Community visits and workshops were held to familiarize northerners with the impacts of climate change on their health, as well as methods to develop research proposals and budgets to meet program requirements. Results Since the launch of the Climate Change and Health Adaptation Program in 2008, Health Canada has funded 36 community projects across Canada's North that focus on relevant health issues caused by climate change. In addition, the program supported capacity-building workshops for northerners, as well as a Pan-Arctic Results Workshop to bring communities together to showcase the results of their research. Results include: numerous films and photo-voice products that engage youth and elders and are available on the web; community-based ice monitoring, surveillance and communication networks; and information products on land, water and ice safety, drinking water, food security and safety, and traditional medicine. Conclusions Through these efforts, communities have increased their knowledge and understanding of the health effects related to climate change and have begun to develop local adaptation strategies. PMID:22584509

Assessing the impact of climate variability on cropping patterns in Kenya

NASA Astrophysics Data System (ADS)

Wahome, A.; Ndungu, L. W.; Ndubi, A. O.; Ellenburg, W. L.; Flores Cordova, A. I.

2017-12-01

Climate variability coupled with over-reliance on rain-fed agricultural production on already strained land that is facing degradation and declining soil fertility; highly impacts food security in Africa. In Kenya, dependence on the approximately 20% of land viable for agricultural production under climate stressors such as variations in amount and frequency of rainfall within the main growing season in March-April-May(MAM) and changing temperatures influence production. With time, cropping zones have changed with the changing climatic conditions. In response, the needs of decision makers to effectively assess the current cropped areas and the changes in cropping patterns, SERVIR East and Southern Africa developed updated crop maps and change maps. Specifically, the change maps depict the change in cropping patterns between 2000 and 2015 with a further assessment done on important food crops such as maize. Between 2001 and 2015 a total of 5394km2 of land was converted to cropland with 3370km2 being conversion to maize production. However, 318 sq km were converted from maize to other crops or conversion to other land use types. To assess the changes in climatic conditions, climate parameters such as precipitation trends, variation and averages over time were derived from CHIRPs (Climate Hazards Infra-red Precipitation with stations) which is a quasi-global blended precipitation dataset available at a resolution of approximately 5km. Water Requirements Satisfaction Index (WRSI) water balance model was used to assess long term trends in crop performance as a proxy for maize yields. From the results, areas experiencing declining and varying precipitation with a declining WRSI index during the long rains displayed agricultural expansion with new areas being converted to cropland. In response to climate variability, farmers have converted more land to cropland instead of adopting better farming methods such as adopting drought resistant cultivars and using better farm inputs.

Improving Snow Process Modeling with Satellite-Based Estimation of Near-Surface-Air-Temperature Lapse Rate

NASA Astrophysics Data System (ADS)

Wahome, A.; Ndungu, L. W.; Ndubi, A. O.; Ellenburg, W. L.; Flores Cordova, A. I.

2016-12-01

Climate variability coupled with over-reliance on rain-fed agricultural production on already strained land that is facing degradation and declining soil fertility; highly impacts food security in Africa. In Kenya, dependence on the approximately 20% of land viable for agricultural production under climate stressors such as variations in amount and frequency of rainfall within the main growing season in March-April-May(MAM) and changing temperatures influence production. With time, cropping zones have changed with the changing climatic conditions. In response, the needs of decision makers to effectively assess the current cropped areas and the changes in cropping patterns, SERVIR East and Southern Africa developed updated crop maps and change maps. Specifically, the change maps depict the change in cropping patterns between 2000 and 2015 with a further assessment done on important food crops such as maize. Between 2001 and 2015 a total of 5394km2 of land was converted to cropland with 3370km2 being conversion to maize production. However, 318 sq km were converted from maize to other crops or conversion to other land use types. To assess the changes in climatic conditions, climate parameters such as precipitation trends, variation and averages over time were derived from CHIRPs (Climate Hazards Infra-red Precipitation with stations) which is a quasi-global blended precipitation dataset available at a resolution of approximately 5km. Water Requirements Satisfaction Index (WRSI) water balance model was used to assess long term trends in crop performance as a proxy for maize yields. From the results, areas experiencing declining and varying precipitation with a declining WRSI index during the long rains displayed agricultural expansion with new areas being converted to cropland. In response to climate variability, farmers have converted more land to cropland instead of adopting better farming methods such as adopting drought resistant cultivars and using better farm inputs.

Localising livestock protein feed production and the impact on land use and greenhouse gas emissions.

PubMed

Sasu-Boakye, Y; Cederberg, C; Wirsenius, S

2014-08-01

Livestock farmers in Sweden usually grow feed grains for livestock but import protein feed from outside Sweden. Aside from the economic implications, some environmental issues are associated with this practice. We used life cycle assessment to evaluate the impact of local protein feed production on land use and greenhouse gas emissions, compared with the use of imported protein feed, for pig meat and dairy milk produced in Sweden. Our results showed that local production reduced greenhouse gas emissions by 4.5% and 12%, respectively, for pigs and dairy cows. Land use for feed production in Sweden increased by 11% for pigs and 25% for dairy cows, but total land use decreased for pig production and increased for dairy milk production. Increased protein feed cultivation in Sweden decreased inputs needed for animal production and improved some ecological processes (e.g. nutrient recycling) of the farm systems. However, the differences in results between scenarios are relatively small and influenced to an extent by methodological choices such as co-product allocation. Moreover, it was difficult to assess the contribution of greenhouse emissions from land use change. The available accounting methods we applied did not adequately account for the potential land use changes and in some cases provided conflicting results. We conclude that local protein feed production presents an opportunity to reduce greenhouse gas emissions but at a cost of increasing land occupation in Sweden for feed production.

The voice of the customer--Part 2: Benchmarking battery chargers against the Consumer's Ideal Product.

PubMed

Bauer, S M; Lane, J P; Stone, V I; Unnikrishnan, N

1998-01-01

The Rehabilitation Engineering Research Center on Technology Evaluation and Transfer is exploring how the end users of assistive technology devices define the ideal device. This work is called the Consumer Ideal Product program. In this work, end users identify and establish the importance of a broad range of product design features, along with the related product support and service provided by manufacturers and vendors. This paper describes a method for systematically transforming end-user defined requirements into a form that is useful and accessible to product designers, manufacturers, and vendors. In particular, product requirements, importance weightings, and metrics are developed from the Consumer Ideal Product battery charger outcomes. Six battery charges are benchmarked against these product requirements using the metrics developed. The results suggest improvements for each product's design, service, and support. Overall, the six chargers meet roughly 45-75% of the ideal product's requirements. Many of the suggested improvements are low-cost changes that, if adopted, could provide companies a competitive advantage in the marketplace.

77 FR 71691 - Type Certification Procedures for Changed Products

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-04

...-8994; Amdt. No. 21-96] RIN 2120-AK19 Type Certification Procedures for Changed Products AGENCY: Federal... regulations for the certification of changes to type-certificated products. That amendment was to enhance... (certification) of the entire changed product. Therefore, Sec. 21.101 is amended to replace ``changed product...

Public health preparedness for the impact of global warming on human health.

PubMed

Wassel, John J

2009-01-01

To assess the changes in weather and weather-associated disturbances related to global warming; the impact on human health of these changes; and the public health preparedness mandated by this impact. Qualitative review of the literature. Articles will be obtained by searching PubMed database, Google, and Google Scholar search engines using terms such as "global warming," "climate change," "human health," "public health," and "preparedness." Sixty-seven journal articles were reviewed. The projections and signs of global environmental changes are worrisome, and there are reasons to believe that related information may have been conservatively interpreted and presented in the recent past. Although the challenges are great, there are many opportunities for devising beneficial solutions at individual, community, and global levels. It is essential for public health professionals to become involved in advocating for change at all of these levels, as well as through professional organizations. We must begin "greening" our own lives and clinical practice, and start talking about these issues with patients. As we build walkable neighborhoods, change methods of energy production, and make water use and food production and distribution more sustainable, the benefits to improved air quality, a stabilized climate, social support, and individual and community health will be dramatic.

Unlocking the Barite Paleoproductivity Proxy: Using a New Barite Extraction Method to Understand Productivity Trends During the Eocene Greenhouse

NASA Astrophysics Data System (ADS)

House, B. M.; Norris, R. D.

2017-12-01

The Early Eocene Climatic Optimum (EECO) around 50 Ma was a sustained period of extreme global warmth with ocean bottom water temperatures of up to 12° C. The marine biologic response to such climatic extremes is unclear, however, in part because proxies that integrate ecosystem-wide productivity signals are scarce. While the accumulation of marine barite (BaSO4) is one such proxy, its applicability has remained limited due to the difficulty in reliably quantifying barite. Discrete measurements of barite content in marine sediments are laborious, and indirect estimates provide unclear results. We have developed a fast, high-throughput method for reliable measurement of barite content that relies on selective extraction of barite rather than sample digestion and quantification of remaining barite. Tests of the new method reveal that it gives the expected results for a wide variety of sediment types and can quantitatively extract 10-100 times the amount of barite typically encountered in natural sediments. Altogether, our method provides an estimated ten-fold increase in analysis efficiency over current sample digestion methods and also works reliably on small ( 1 g or less) sediment samples. Furthermore, the instrumentation requirements of this method are minor, so samples can be analyzed in shipboard labs to generate real-time paleoproductivity records during coring expeditions. Because of the magnitude of throughput improvement, this new technique will permit the generation of large datasets needed to address previously intractable paleoclimate and paleoceanographic questions. One such question is how export productivity changes during climatic extremes. We used our new method to analyze globally distributed sediment cores to determine if the EECO represented a period of anomalous export productivity either due to higher rates of primary production or more vigorous heterotrophic metabolisms. An increase in export productivity could provide a mechanism for exiting periods of extreme warmth, and understanding the interplay between temperature, atmospheric CO2 levels, and export productivity during the EECO will help clarify how the marine biologic system functions as a whole.

A risk-based classification scheme for genetically modified foods. II: Graded testing.

PubMed

Chao, Eunice; Krewski, Daniel

2008-12-01

This paper presents a graded approach to the testing of crop-derived genetically modified (GM) foods based on concern levels in a proposed risk-based classification scheme (RBCS) and currently available testing methods. A graded approach offers the potential for more efficient use of testing resources by focusing less on lower concern GM foods, and more on higher concern foods. In this proposed approach to graded testing, products that are classified as Level I would have met baseline testing requirements that are comparable to what is widely applied to premarket assessment of GM foods at present. In most cases, Level I products would require no further testing, or very limited confirmatory analyses. For products classified as Level II or higher, additional testing would be required, depending on the type of the substance, prior dietary history, estimated exposure level, prior knowledge of toxicity of the substance, and the nature of the concern related to unintended changes in the modified food. Level III testing applies only to the assessment of toxic and antinutritional effects from intended changes and is tailored to the nature of the substance in question. Since appropriate test methods are not currently available for all effects of concern, future research to strengthen the testing of GM foods is discussed.

Using NOAA/AVHRR based remote sensing data and PCR method for estimation of Aus rice yield in Bangladesh

NASA Astrophysics Data System (ADS)

Nizamuddin, Mohammad; Akhand, Kawsar; Roytman, Leonid; Kogan, Felix; Goldberg, Mitch

2015-06-01

Rice is a dominant food crop of Bangladesh accounting about 75 percent of agricultural land use for rice cultivation and currently Bangladesh is the world's fourth largest rice producing country. Rice provides about two-third of total calorie supply and about one-half of the agricultural GDP and one-sixth of the national income in Bangladesh. Aus is one of the main rice varieties in Bangladesh. Crop production, especially rice, the main food staple, is the most susceptible to climate change and variability. Any change in climate will, thus, increase uncertainty regarding rice production as climate is major cause year-to-year variability in rice productivity. This paper shows the application of remote sensing data for estimating Aus rice yield in Bangladesh using official statistics of rice yield with real time acquired satellite data from Advanced Very High Resolution Radiometer (AVHRR) sensor and Principal Component Regression (PCR) method was used to construct a model. The simulated result was compared with official agricultural statistics showing that the error of estimation of Aus rice yield was less than 10%. Remote sensing, therefore, is a valuable tool for estimating crop yields well in advance of harvest, and at a low cost.

Production of a cellulase-free alkaline xylanase from Bacillus pumilus MTCC 5015 by submerged fermentation and its application in biobleaching.

PubMed

Thomas, Leya; Sindhu, Raveendran; Binod, Parameswaran; Pandey, Ashok

2015-06-01

Here, we described the production of a cellulase-free alkaline xylanase from Bacillus pumilus MTCC 5015 by submerged fermentation and its application in biobleaching. Various process parameters affecting xylanase production by B. pumilus were optimized by adopting a Plackett-Burman design (PBD) as well as Response surface methodology (RSM). These statistical methods aid in improving the enzyme yield by analysing the individual crucial components of the medium. Maximum production was obtained with 4% yeast extract, 0.08% magnesium sulphate, 30 h of inoculum age, incubation temperature of 33.5 degrees C and pH 9.0. Under optimized conditions, the xylanase activity was 372 IU/ml. Media engineering improved a 5-fold increase in the enzyme production. Scanning electron microscopy (SEM) showed significant changes on the surface of xylanase treated pulps as a result of xylan hydrolysis. Increased roughness of paper carton fibres was apparent in scanning electron micrograph due to opening of the micro fibrils present on the surface by xylanase action. The untreated pulp did not show any such change. These results demonstrated that the B. pumilus MTCC 5015 xylanase was effective in bio-bleaching of paper carton.

An integrated tool to support engineers for WMSDs risk assessment during the assembly line balancing.

PubMed

Di Benedetto, Raffaele; Fanti, Michele

2012-01-01

This paper wants to present an integrated approach to Line Balancing and Risk Assessment and a Software Tool named ErgoAnalysis that makes it easy to control the whole production process and produces a Risk Index for the actual work tasks in an Assembly Line. Assembly Line Balancing, or simply Line Balancing, is the problem of assigning operations to workstations along an assembly line, in such a way that the assignment be optimal in some sense. Assembly lines are characterized by production constraints and restrictions due to several aspects such as the nature of the product and the flow of orders. To be able to respond effectively to the needs of production, companies need to frequently change the workload and production models. Each manufacturing process might be quite different from another. To optimize very specific operations, assembly line balancing might utilize a number of methods and the Engineer must consider ergonomic constraints, in order to reduce the risk of WMDSs. Risk Assessment may result very expensive because the Engineer must evaluate it at every change. ErgoAnalysis can reduce cost and improve effectiveness in Risk Assessment during the Line Balancing.

The greenhouse gas emissions performance of cellulosic ethanol supply chains in Europe

PubMed Central

Slade, Raphael; Bauen, Ausilio; Shah, Nilay

2009-01-01

Background Calculating the greenhouse gas savings that may be attributed to biofuels is problematic because production systems are inherently complex and methods used to quantify savings are subjective. Differing approaches and interpretations have fuelled a debate about the environmental merit of biofuels, and consequently about the level of policy support that can be justified. This paper estimates and compares emissions from plausible supply chains for lignocellulosic ethanol production, exemplified using data specific to the UK and Sweden. The common elements that give rise to the greatest greenhouse gas emissions are identified and the sensitivity of total emissions to variations in these elements is estimated. The implications of including consequential impacts including indirect land-use change, and the effects of selecting alternative allocation methods on the interpretation of results are discussed. Results We find that the most important factors affecting supply chain emissions are the emissions embodied in biomass production, the use of electricity in the conversion process and potentially consequential impacts: indirect land-use change and fertiliser replacement. The large quantity of electricity consumed during enzyme manufacture suggests that enzymatic conversion processes may give rise to greater greenhouse gas emissions than the dilute acid conversion process, even though the dilute acid process has a somewhat lower ethanol yield. Conclusion The lignocellulosic ethanol supply chains considered here all lead to greenhouse gas savings relative to gasoline An important caveat to this is that if lignocellulosic ethanol production uses feedstocks that lead to indirect land-use change, or other significant consequential impacts, the benefit may be greatly reduced. Co-locating ethanol, electricity generation and enzyme production in a single facility may improve performance, particularly if this allows the number of energy intensive steps in enzyme production to be reduced, or if other process synergies are available. If biofuels policy in the EU remains contingent on favourable environmental performance then the multi-scale nature of bioenergy supply chains presents a genuine challenge. Lignocellulosic ethanol holds promise for emission reductions, but maximising greenhouse gas savings will not only require efficient supply chain design but also a better understanding of the spatial and temporal factors which affect overall performance. PMID:19682352

Assessing the impact of lyophilization process in production of implants based on the bacterial cellulose using Raman spectroscopy method

NASA Astrophysics Data System (ADS)

Timchenko, E. V.; Timchenko, P. E.; Pisareva, E. V.; Vlasov, M. Yu; Revin, V. V.; Klenova, N. A.; Asadova, A. A.

2017-01-01

In this article we present the research results of lyophilization process influence on the composition of hybrid materials based on the bacterial cellulose (BC) using Raman spectroscopy method. As an object of research was used BC, as well as hybrids based on it, comprising the various combinations of hydroxyapatite (HAP) and collagen. Our studies showed that during the lyophilization process changes the ratio of the individual components. It was found that for samples hybrid based on BC with addition of HAP occurs increase of PO4 3- peak intensity in the region 956 cm-1 with decreasing width, which indicates a change in the degree of HAP crystallinity.

Finger wear detection for production line battery tester

DOEpatents

Depiante, E.V.

1997-11-18

A method is described for detecting wear in a battery tester probe. The method includes providing a battery tester unit having at least one tester finger, generating a tester signal using the tester fingers and battery tester unit with the signal characteristic of the electrochemical condition of the battery and the tester finger, applying wavelet transformation to the tester signal including computing a mother wavelet to produce finger wear indicator signals, analyzing the signals to create a finger wear index, comparing the wear index for the tester finger with the index for a new tester finger and generating a tester finger signal change signal to indicate achieving a threshold wear change. 9 figs.

A time-series method for automated measurement of changes in mitotic and interphase duration from time-lapse movies.

PubMed

Sigoillot, Frederic D; Huckins, Jeremy F; Li, Fuhai; Zhou, Xiaobo; Wong, Stephen T C; King, Randall W

2011-01-01

Automated time-lapse microscopy can visualize proliferation of large numbers of individual cells, enabling accurate measurement of the frequency of cell division and the duration of interphase and mitosis. However, extraction of quantitative information by manual inspection of time-lapse movies is too time-consuming to be useful for analysis of large experiments. Here we present an automated time-series approach that can measure changes in the duration of mitosis and interphase in individual cells expressing fluorescent histone 2B. The approach requires analysis of only 2 features, nuclear area and average intensity. Compared to supervised learning approaches, this method reduces processing time and does not require generation of training data sets. We demonstrate that this method is as sensitive as manual analysis in identifying small changes in interphase or mitotic duration induced by drug or siRNA treatment. This approach should facilitate automated analysis of high-throughput time-lapse data sets to identify small molecules or gene products that influence timing of cell division.

Rapid characterization of chemical markers for discrimination of Moutan Cortex and its processed products by direct injection-based mass spectrometry profiling and metabolomic method.

PubMed

Li, Chao-Ran; Li, Meng-Ning; Yang, Hua; Li, Ping; Gao, Wen

2018-06-01

Processing of herbal medicines is a characteristic pharmaceutical technique in Traditional Chinese Medicine, which can reduce toxicity and side effect, improve the flavor and efficacy, and even change the pharmacological action entirely. It is significant and crucial to perform a method to find chemical markers for differentiating herbal medicines in different processed degrees. The aim of this study was to perform a rapid and reasonable method to discriminate Moutan Cortex and its processed products, and to reveal the characteristics of chemical components depend on chemical markers. Thirty batches of Moutan Cortex and its processed products, including 11 batches of Raw Moutan Cortex (RMC), 9 batches of Moutan Cortex Tostus (MCT) and 10 batches of Moutan Cortex Carbonisatus (MCC), were directly injected in electrospray ionization quadrupole time-of-flight mass spectrometry (ESI-QTOF MS) for rapid analysis in positive and negative mode. Without chromatographic separation, each run was completed within 3 min. The raw MS data were automatically extracted by background deduction and molecular feature (MF) extraction algorithm. In negative mode, a total of 452 MFs were obtained and then pretreated by data filtration and differential analysis. After that, the filtered 85 MFs were treated by principal component analysis (PCA) to reduce the dimensions. Subsequently, a partial least squares discrimination analysis (PLS-DA) model was constructed for differentiation and chemical markers detection of Moutan Cortex in different processed degrees. The positive mode data were treated as same as those in negative mode. RMC, MCT and MCC were successfully classified. Moreover, 14 and 3 chemical markers from negative and positive mode respectively, were screened by the combination of their relative peak areas and the parameter variable importance in the projection (VIP) values in PLS-DA model. The content changes of these chemical markers were employed in order to illustrate chemical changes of Moutan Cortex after processed. These results showed that the proposed method which combined non-targeted metabolomics analysis with multivariate statistics analysis is reasonable and effective. It could not only be applied to discriminate herbal medicines and their processing products, but also to reveal the characteristics of chemical components during processing. Copyright © 2018. Published by Elsevier GmbH.

Bulk tank somatic cell counts analyzed by statistical process control tools to identify and monitor subclinical mastitis incidence.

PubMed

Lukas, J M; Hawkins, D M; Kinsel, M L; Reneau, J K

2005-11-01

The objective of this study was to examine the relationship between monthly Dairy Herd Improvement (DHI) subclinical mastitis and new infection rate estimates and daily bulk tank somatic cell count (SCC) summarized by statistical process control tools. Dairy Herd Improvement Association test-day subclinical mastitis and new infection rate estimates along with daily or every other day bulk tank SCC data were collected for 12 mo of 2003 from 275 Upper Midwest dairy herds. Herds were divided into 5 herd production categories. A linear score [LNS = ln(BTSCC/100,000)/0.693147 + 3] was calculated for each individual bulk tank SCC. For both the raw SCC and the transformed data, the mean and sigma were calculated using the statistical quality control individual measurement and moving range chart procedure of Statistical Analysis System. One hundred eighty-three herds of the 275 herds from the study data set were then randomly selected and the raw (method 1) and transformed (method 2) bulk tank SCC mean and sigma were used to develop models for predicting subclinical mastitis and new infection rate estimates. Herd production category was also included in all models as 5 dummy variables. Models were validated by calculating estimates of subclinical mastitis and new infection rates for the remaining 92 herds and plotting them against observed values of each of the dependents. Only herd production category and bulk tank SCC mean were significant and remained in the final models. High R2 values (0.83 and 0.81 for methods 1 and 2, respectively) indicated a strong correlation between the bulk tank SCC and herd's subclinical mastitis prevalence. The standard errors of the estimate were 4.02 and 4.28% for methods 1 and 2, respectively, and decreased with increasing herd production. As a case study, Shewhart Individual Measurement Charts were plotted from the bulk tank SCC to identify shifts in mastitis incidence. Four of 5 charts examined signaled a change in bulk tank SCC before the DHI test day identified the change in subclinical mastitis prevalence. It can be concluded that applying statistical process control tools to daily bulk tank SCC can be used to estimate subclinical mastitis prevalence in the herd and observe for change in the subclinical mastitis status. Single DHI test day estimates of new infection rate were insufficient to accurately describe its dynamics.

Review of Thawing Time Prediction Models Depending
on Process Conditions and Product Characteristics

PubMed Central

Kluza, Franciszek; Spiess, Walter E. L.; Kozłowicz, Katarzyna

2016-01-01

Summary Determining thawing times of frozen foods is a challenging problem as the thermophysical properties of the product change during thawing. A number of calculation models and solutions have been developed. The proposed solutions range from relatively simple analytical equations based on a number of assumptions to a group of empirical approaches that sometimes require complex calculations. In this paper analytical, empirical and graphical models are presented and critically reviewed. The conditions of solution, limitations and possible applications of the models are discussed. The graphical and semi--graphical models are derived from numerical methods. Using the numerical methods is not always possible as running calculations takes time, whereas the specialized software and equipment are not always cheap. For these reasons, the application of analytical-empirical models is more useful for engineering. It is demonstrated that there is no simple, accurate and feasible analytical method for thawing time prediction. Consequently, simplified methods are needed for thawing time estimation of agricultural and food products. The review reveals the need for further improvement of the existing solutions or development of new ones that will enable accurate determination of thawing time within a wide range of practical conditions of heat transfer during processing. PMID:27904387

Elemental concentration variations in Plio-Pleistocene sediments from ODP Site 1143 (southern South China Sea) obtained by XRF analyses

NASA Astrophysics Data System (ADS)

Tian, J.; Xie, X.; Jin, H.; Wang, P.; Jian, Z.

2009-12-01

Energy dispersive X-ray fluorescence (XRF) scanning technology provides the most accurate and most economic analytical methods for the determination of major and minor elements of the deep-sea sediment ranging from sodium (11) to uranium (92). Scanning on the smooth core surface by XRF Core scanner is reliable and non-destructive to the sediment, requiring little or no time to prepare the core. This method overcomes the drawback of the traditional analytical method by ICP-AES or ICP-MS which requires long time for sample preparation. Thus, it makes it viable to reconstruct long and high-resolution elemental time series from sediment cores. We have performed relatively elemental concentration analyses on the deep sea sediment cores from ODP site 1143 (southern SCS) down to 190.77 mcd (meters composite depth) by XRF core scanner. The depth resolution of the scanning is 1 cm, equivalent to a time resolution of ~250 years. The age model is based on tuning the benthic foraminiferal d18O at Site 1143 to obliquity and precession (Tian et al., 2002) which indicates that the 190.77 meters long sediment spans the past 5 Myr. We compared the records between 99.5 and 136.46 mcd with the elemental records from the same site obtained by Philips PW 2400 X-ray spectrometer (Wehausen et al., online publication). Comparison reveals, regardless of the absolute changes of the elements, that the elemental records (Si, Ti, Al, Fe, Mn, Ca, K, P, Ba, Rb, Sr) obtained by two methods are nearly the same. Results show that the relative concentration variations of the productivity related elements such as Ba and Ca display distinctive glacial-interglacial cycles for the past 5 Myr. These productivity cycles recorded show one-on-one relationship with the glacial-interglacial cycles of the global ice volume change recorded in the benthic foraminiferal d18O. The glacial-interglacial cycles in productivity and global ice volume changes are consistent with each other not only in amplitude but also in secular variations. The benthic d18O implies the final formation of the northern hemisphere glaciation between ~2.5 Ma and ~3.3 Ma, as indicated by gradually increased values of d18O. During this period, both Ba and Ca show gradually increased values of relative concentration, indicating increased productivity which was probably caused by intensified East Asia summer monsoon. The close relationship of the productivity related elemental variations with benthic foraminiferal d18O reveals that the Plio-Pleistocene variations of the East Asian monsoon have been greatly dominated by global ice volume change. Although the elements related to terrigenous detrital matter composition of site 1143 such as Ti, Fe, As, Co and Ni display distinct glacial-interglacial cycles for the past 5 Myr, they display different patterns in secular variation with that of the benthic foraminiferal d18O. The mismatch indicates that besides northern hemisphere glaciation other multiple processes including changes in provenance and weathering intensity caused by monsoonal climate variability and sea level fluctuations could have affected the terrigenous detrital matter composition of site 1143.

Multivariate constrained shape optimization: Application to extrusion bell shape for pasta production

NASA Astrophysics Data System (ADS)

Sarghini, Fabrizio; De Vivo, Angela; Marra, Francesco

2017-10-01

Computational science and engineering methods have allowed a major change in the way products and processes are designed, as validated virtual models - capable to simulate physical, chemical and bio changes occurring during production processes - can be realized and used in place of real prototypes and performing experiments, often time and money consuming. Among such techniques, Optimal Shape Design (OSD) (Mohammadi & Pironneau, 2004) represents an interesting approach. While most classical numerical simulations consider fixed geometrical configurations, in OSD a certain number of geometrical degrees of freedom is considered as a part of the unknowns: this implies that the geometry is not completely defined, but part of it is allowed to move dynamically in order to minimize or maximize the objective function. The applications of optimal shape design (OSD) are uncountable. For systems governed by partial differential equations, they range from structure mechanics to electromagnetism and fluid mechanics or to a combination of the three. This paper presents one of possible applications of OSD, particularly how extrusion bell shape, for past production, can be designed by applying a multivariate constrained shape optimization.

Modeling Net Land Occupation of Hydropower Reservoirs in Norway for Use in Life Cycle Assessment.

PubMed

Dorber, Martin; May, Roel; Verones, Francesca

2018-02-20

Increasing hydropower electricity production constitutes a unique opportunity to mitigate climate change impacts. However, hydropower electricity production also impacts aquatic and terrestrial biodiversity through freshwater habitat alteration, water quality degradation, and land use and land use change (LULUC). Today, no operational model exists that covers any of these cause-effect pathways within life cycle assessment (LCA). This paper contributes to the assessment of LULUC impacts of hydropower electricity production in Norway in LCA. We quantified the inundated land area associated with 107 hydropower reservoirs with remote sensing data and related it to yearly electricity production. Therewith, we calculated an average net land occupation of 0.027 m 2 ·yr/kWh of Norwegian storage hydropower plants for the life cycle inventory. Further, we calculated an adjusted average land occupation of 0.007 m 2 ·yr/kWh, accounting for an underestimation of water area in the performed maximum likelihood classification. The calculated land occupation values are the basis to support the development of methods for assessing the land occupation impacts of hydropower on biodiversity in LCA at a damage level.

Are forest disturbances amplifying or canceling out climate change-induced productivity changes in European forests?

NASA Astrophysics Data System (ADS)

Reyer, Christopher P. O.; Bathgate, Stephen; Blennow, Kristina; Borges, Jose G.; Bugmann, Harald; Delzon, Sylvain; Faias, Sonia P.; Garcia-Gonzalo, Jordi; Gardiner, Barry; Gonzalez-Olabarria, Jose Ramon; Gracia, Carlos; Guerra Hernández, Juan; Kellomäki, Seppo; Kramer, Koen; Lexer, Manfred J.; Lindner, Marcus; van der Maaten, Ernst; Maroschek, Michael; Muys, Bart; Nicoll, Bruce; Palahi, Marc; Palma, João HN; Paulo, Joana A.; Peltola, Heli; Pukkala, Timo; Rammer, Werner; Ray, Duncan; Sabaté, Santiago; Schelhaas, Mart-Jan; Seidl, Rupert; Temperli, Christian; Tomé, Margarida; Yousefpour, Rasoul; Zimmermann, Niklaus E.; Hanewinkel, Marc

2017-03-01

Recent studies projecting future climate change impacts on forests mainly consider either the effects of climate change on productivity or on disturbances. However, productivity and disturbances are intrinsically linked because 1) disturbances directly affect forest productivity (e.g. via a reduction in leaf area, growing stock or resource-use efficiency), and 2) disturbance susceptibility is often coupled to a certain development phase of the forest with productivity determining the time a forest is in this specific phase of susceptibility. The objective of this paper is to provide an overview of forest productivity changes in different forest regions in Europe under climate change, and partition these changes into effects induced by climate change alone and by climate change and disturbances. We present projections of climate change impacts on forest productivity from state-of-the-art forest models that dynamically simulate forest productivity and the effects of the main European disturbance agents (fire, storm, insects), driven by the same climate scenario in seven forest case studies along a large climatic gradient throughout Europe. Our study shows that, in most cases, including disturbances in the simulations exaggerate ongoing productivity declines or cancel out productivity gains in response to climate change. In fewer cases, disturbances also increase productivity or buffer climate-change induced productivity losses, e.g. because low severity fires can alleviate resource competition and increase fertilization. Even though our results cannot simply be extrapolated to other types of forests and disturbances, we argue that it is necessary to interpret climate change-induced productivity and disturbance changes jointly to capture the full range of climate change impacts on forests and to plan adaptation measures.

Are forest disturbances amplifying or canceling out climate change-induced productivity changes in European forests?

PubMed Central

Reyer, Christopher P O; Bathgate, Stephen; Blennow, Kristina; Borges, Jose G; Bugmann, Harald; Delzon, Sylvain; Faias, Sonia P; Garcia-Gonzalo, Jordi; Gardiner, Barry; Gonzalez-Olabarria, Jose Ramon; Gracia, Carlos; Hernández, Juan Guerra; Kellomäki, Seppo; Kramer, Koen; Lexer, Manfred J; Lindner, Marcus; van der Maaten, Ernst; Maroschek, Michael; Muys, Bart; Nicoll, Bruce; Palahi, Marc; Palma, João HN; Paulo, Joana A; Peltola, Heli; Pukkala, Timo; Rammer, Werner; Ray, Duncan; Sabaté, Santiago; Schelhaas, Mart-Jan; Seidl, Rupert; Temperli, Christian; Tomé, Margarida; Yousefpour, Rasoul; Zimmermann, Niklaus E; Hanewinkel, Marc

2017-01-01

Recent studies projecting future climate change impacts on forests mainly consider either the effects of climate change on productivity or on disturbances. However, productivity and disturbances are intrinsically linked because 1) disturbances directly affect forest productivity (e.g. via a reduction in leaf area, growing stock or resource-use efficiency), and 2) disturbance susceptibility is often coupled to a certain development phase of the forest with productivity determining the time a forest is in this specific phase of susceptibility. The objective of this paper is to provide an overview of forest productivity changes in different forest regions in Europe under climate change, and partition these changes into effects induced by climate change alone and by climate change and disturbances. We present projections of climate change impacts on forest productivity from state-of-the-art forest models that dynamically simulate forest productivity and the effects of the main European disturbance agents (fire, storm, insects), driven by the same climate scenario in seven forest case studies along a large climatic gradient throughout Europe. Our study shows that, in most cases, including disturbances in the simulations exaggerate ongoing productivity declines or cancel out productivity gains in response to climate change. In fewer cases, disturbances also increase productivity or buffer climate-change induced productivity losses, e.g. because low severity fires can alleviate resource competition and increase fertilization. Even though our results cannot simply be extrapolated to other types of forests and disturbances, we argue that it is necessary to interpret climate change-induced productivity and disturbance changes jointly to capture the full range of climate change impacts on forests and to plan adaptation measures. PMID:28855959

Are forest disturbances amplifying or canceling out climate change-induced productivity changes in European forests?

PubMed

Reyer, Christopher P O; Bathgate, Stephen; Blennow, Kristina; Borges, Jose G; Bugmann, Harald; Delzon, Sylvain; Faias, Sonia P; Garcia-Gonzalo, Jordi; Gardiner, Barry; Gonzalez-Olabarria, Jose Ramon; Gracia, Carlos; Hernández, Juan Guerra; Kellomäki, Seppo; Kramer, Koen; Lexer, Manfred J; Lindner, Marcus; van der Maaten, Ernst; Maroschek, Michael; Muys, Bart; Nicoll, Bruce; Palahi, Marc; Palma, João Hn; Paulo, Joana A; Peltola, Heli; Pukkala, Timo; Rammer, Werner; Ray, Duncan; Sabaté, Santiago; Schelhaas, Mart-Jan; Seidl, Rupert; Temperli, Christian; Tomé, Margarida; Yousefpour, Rasoul; Zimmermann, Niklaus E; Hanewinkel, Marc

2017-03-16

Recent studies projecting future climate change impacts on forests mainly consider either the effects of climate change on productivity or on disturbances. However, productivity and disturbances are intrinsically linked because 1) disturbances directly affect forest productivity (e.g. via a reduction in leaf area, growing stock or resource-use efficiency), and 2) disturbance susceptibility is often coupled to a certain development phase of the forest with productivity determining the time a forest is in this specific phase of susceptibility. The objective of this paper is to provide an overview of forest productivity changes in different forest regions in Europe under climate change, and partition these changes into effects induced by climate change alone and by climate change and disturbances. We present projections of climate change impacts on forest productivity from state-of-the-art forest models that dynamically simulate forest productivity and the effects of the main European disturbance agents (fire, storm, insects), driven by the same climate scenario in seven forest case studies along a large climatic gradient throughout Europe. Our study shows that, in most cases, including disturbances in the simulations exaggerate ongoing productivity declines or cancel out productivity gains in response to climate change. In fewer cases, disturbances also increase productivity or buffer climate-change induced productivity losses, e.g. because low severity fires can alleviate resource competition and increase fertilization. Even though our results cannot simply be extrapolated to other types of forests and disturbances, we argue that it is necessary to interpret climate change-induced productivity and disturbance changes jointly to capture the full range of climate change impacts on forests and to plan adaptation measures.