Effect of framework design on crown failure.

PubMed

Bonfante, Estevam A; da Silva, Nelson R F A; Coelho, Paulo G; Bayardo-González, Daniel E; Thompson, Van P; Bonfante, Gerson

2009-04-01

This study evaluated the effect of core-design modification on the characteristic strength and failure modes of glass-infiltrated alumina (In-Ceram) (ICA) compared with porcelain fused to metal (PFM). Premolar crowns of a standard design (PFMs and ICAs) or with a modified framework design (PFMm and ICAm) were fabricated, cemented on dies, and loaded until failure. The crowns were loaded at 0.5 mm min(-1) using a 6.25 mm tungsten-carbide ball at the central fossa. Fracture load values were recorded and fracture analysis of representative samples were evaluated using scanning electron microscopy. Probability Weibull curves with two-sided 90% confidence limits were calculated for each group and a contour plot of the characteristic strength was obtained. Design modification showed an increase in the characteristic strength of the PFMm and ICAm groups, with PFM groups showing higher characteristic strength than ICA groups. The PFMm group showed the highest characteristic strength among all groups. Fracture modes of PFMs and of PFMm frequently reached the core interface at the lingual cusp, whereas ICA exhibited bulk fracture through the alumina core. Core-design modification significantly improved the characteristic strength for PFM and for ICA. The PFM groups demonstrated higher characteristic strength than both ICA groups combined.

Design study of RL10 derivatives. Volume 2: Engine design characteristics, appendices. [development of rocket engine for application to space tug propulsion system

NASA Technical Reports Server (NTRS)

1973-01-01

Calculations, curves, and substantiating data which support the engine design characteristics of the RL-10 engines are presented. A description of the RL-10 ignition system is provided. The performance calculations of the RL-10 derivative engines and the performance results obtained are reported. The computer simulations used to establish the control system requirements and to define the engine transient characteristics are included.

A study of automotive workers anthropometric physical characteristics from Mexico Northwest.

PubMed

Lucero-Duarte, Karla; de la Vega-Bustillos, Enrique; López-Millán, Francisco

2012-01-01

Due to the lack of anthropometric information in northwest Mexico, we did an anthropometric study that represents the population physical characteristics and that is reliable for the design or redesign of workstations. The study was divided in two phases. The first one was the anthropometric study of 2900 automotive industry workers in northwest of Mexico. The study includes 40 body dimensions of 2345 males and 555 females personalized to be used in future researches. Second phase includes compared anthropometric characteristics of population reported in four Mexican studies and a Colombian study against the current study. Benefits of this project are: a reliable database of anthropometric characteristic of automotive industry population for workstations design or redesign that match with the users, increase product quality and reduce economic, medical and union complains.

Safety in passenger ships: The influence of environmental design characteristics on people's perception of safety.

PubMed

Ahola, Markus; Mugge, Ruth

2017-03-01

Although objective safety is a widely studied topic in ergonomics, subjective safety has received far less research attention. Nevertheless, most of human decision-making and behavior depends on how we perceive our environment. This study investigates the effects of various environmental design characteristics on people's safety perception in a passenger ship context. Five different environmental design characteristics were manipulated to increase the openness of the space or to create more clear navigation, resulting in 20 different cabin corridors for a passenger ship. Ninety-seven respondents were asked to rate these corridors on the perceived safety in an experiment. The results showed that people feel more safe when the corridors have a curved ceiling, when the walls do not have a split-level design, and when there is a view to the outside. Designers can use these insights when designing future environments. Copyright © 2016 Elsevier Ltd. All rights reserved.

Wind-Tunnel Investigation of the Opening Characteristics, Drag, and Stability of Several Hemispherical Parachutes

NASA Technical Reports Server (NTRS)

Scher, Stanley E.; Gale, Lawrence J.

1948-01-01

An investigation has been conducted to determine the opening characteristics of several hemispherical parachutes and to study the influence of the parachute design variables on these opening characteristics. The effects of design variables on the drag and stability characteristics of the parachutes were also evaluated. The tests were made in the Langley 20-foot free-spinning tunnel and in the Langley 300 MPH 7 by 10-foot tunnel.

National Study of Nursing Research Characteristics at Magnet®-Designated Hospitals.

PubMed

Pintz, Christine; Zhou, Qiuping Pearl; McLaughlin, Maureen Kirkpatrick; Kelly, Katherine Patterson; Guzzetta, Cathie E

2018-05-01

To describe the research infrastructure, culture, and characteristics of building a nursing research program in Magnet®-designated hospitals. Magnet recognition requires hospitals to conduct research and implement evidence-based practice (EBP). Yet, the essential characteristics of productive nursing research programs are not well described. We surveyed 181 nursing research leaders at Magnet-designated hospitals to assess the characteristics in their hospitals associated with research infrastructure, research culture, and building a nursing research program. Magnet hospitals provide most of the needed research infrastructure and have a culture that support nursing research. Higher scores for the 3 categories were found when hospitals had a nursing research director, a research department, and more than 10 nurse-led research studies in the past 5 years. While some respondents indicated their nurse executives and leaders support the enculturation of EBP and research, there continue to be barriers to full implementation of these characteristics in practice.

Profiles in Retention Part 1: Design Characteristics of a Graduate Synchronous Online Program

ERIC Educational Resources Information Center

Aversa, Elizabeth; MacCall, Steven

2013-01-01

This paper is a case study of a Master of Library and Information Studies degree program online option that has been unusually successful in retaining and graduating students. Design characteristics of this program that has maintained a retention rate of over 90 percent over five years are described and mapped to the literature on distance…

Parental and Child Characteristics Related to Early-Onset Disordered Eating: A Systematic Review.

PubMed

Larsen, Pernille Stemann; Strandberg-Larsen, Katrine; Micali, Nadia; Andersen, Anne-Marie Nybo

2015-01-01

After participating in this activity, learners should be better able to: Evaluate the evidence regarding parental and child characteristics related to early-onset disordered eating. Eating disorders are rare in children, but disordered eating is common. Understanding the phenomenology of disordered eating in childhood can aid prevention of full-blown eating disorders. The purpose of this review is to systematically extract and synthesize the evidence on parental and child characteristics related to early-onset disordered eating. Systematic searches were conducted in PubMED/MEDLINE, EMBASE, and PsycInfo using the following search terms: eating disorder, disordered eating, problem eating, anorexia nervosa, bulimia nervosa, binge eating, child, preadolescent, and early onset. Studies published from 1990 to 2013 addressing parental and child characteristics of disordered eating in children aged 6 to 12 years were eligible for inclusion. The search was restricted to studies with cross-sectional, case-control, or longitudinal designs, studies in English, and with abstracts available. Forty-four studies fit these criteria. Most studies were based on community samples with a cross-sectional design. The included studies varied considerably in size, instruments used to assess early-onset disordered eating, and parental and child characteristics investigated. Important determinants included the following: higher body weight, previously reported disordered eating, body dissatisfaction, depression, parental disordered eating, and parental comments/concerns about child's weight and eating. The findings were inconsistent for sex, age, socioeconomic status, ethnicity, self-esteem/worth, and parental body weight. In conclusion, characteristics related to early-onset disordered eating have mainly been explored with a cross-sectional design. Full understanding of causal pathways will require good-quality longitudinal studies designed to address the influence of parental eating behaviors, mental and physical health, family interactions, and child growth patterns.

Designing 4H-SiC P-shielding trench gate MOSFET to optimize on-off electrical characteristics

NASA Astrophysics Data System (ADS)

Kyoung, Sinsu; Hong, Young-sung; Lee, Myung-hwan; Nam, Tae-jin

2018-02-01

In order to enhance specific on-resistance (Ron,sp), the trench gate structure was also introduced into 4H-SiC MOSFET as Si MOSFET. But the 4H-SiC trench gate has worse off-state characteristics than the Si trench gate due to the incomplete gate oxidation process (Šimonka et al., 2017). In order to overcome this problem, P-shielding trench gate MOSFET (TMOS) was proposed and researched in previous studies. But P-shielding has to be designed with minimum design rule in order to protect gate oxide effectively. P-shielding TMOS also has the drawback of on-state characteristics degradation corresponding to off state improvement for minimum design rule. Therefore optimized design is needed to satisfy both on and off characteristics. In this paper, the design parameters were analyzed and optimized so that the 4H-SiC P-shielding TMOS satisfies both on and off characteristics. Design limitations were proposed such that P-shielding is able to defend the gate oxide. The P-shielding layer should have the proper junction depth and concentration to defend the electric field to gate oxide during the off-state. However, overmuch P-shielding junction depth disturbs the on-state current flow, a problem which can be solved by increasing the trench depth. As trench depth increases, however, the breakdown voltage decreases. Therefore, trench depth should be designed with due consideration for on-off characteristics. For this, design conditions and modeling were proposed which allow P-shielding to operate without degradation of on-state characteristics. Based on this proposed model, the 1200 V 4H-SiC P-shielding trench gate MOSFET was designed and optimized.

The use of grounded theory in studies of nurses and midwives' coping processes: a systematic literature search.

PubMed

Cheer, Karen; MacLaren, David; Tsey, Komla

2015-01-01

Researchers are increasingly using grounded theory methodologies to study the professional experience of nurses and midwives. To review common grounded theory characteristics and research design quality as described in grounded theory studies of coping strategies used by nurses and midwives. A systematic database search for 2005-2015 identified and assessed grounded theory characteristics from 16 studies. Study quality was assessed using a modified Critical Appraisal Skills Programme tool. Grounded theory was considered a methodology or a set of methods, able to be used within different nursing and midwifery contexts. Specific research requirements determined the common grounded theory characteristics used in different studies. Most researchers did not clarify their epistemological and theoretical perspectives. To improve research design and trustworthiness of grounded theory studies in nursing and midwifery, researchers need to state their theoretical stance and clearly articulate their use of grounded theory methodology and characteristics in research reporting.

Relationships Between Design Characteristics of Avionics Subsystems and Training Cost, Training Difficulty, and Job Performance. Final Report, Covering Activity from 1 July 1971 Through 1 September 1972.

ERIC Educational Resources Information Center

Lintz, Larry M.; And Others

A study investigated the relationship between avionics subsystem design characteristics and training time, training cost, and job performance. A list of design variables believed to affect training and job performance was established and supplemented with personnel variables, including aptitude test scores and the amount of training and…

Effects of Human Factors in Engineering and Design for Teaching Mathematics: A Comparison Study of Online and Face-to-Face at a Technical College

ERIC Educational Resources Information Center

Mativo, John M.; Hill, Roger B.; Godfrey, Paul W.

2013-01-01

The focus of this study was to examine four characteristics for successful and unsuccessful students enrolled in basic mathematics courses at a technical college. The characteristics, considered to be in part effects of human factors in engineering and design, examined the preferred learning styles, computer information systems competency,…

Consumer perceptions of specific design characteristics for front-of-package nutrition labels.

PubMed

Acton, R B; Vanderlee, L; Roberto, C A; Hammond, D

2018-04-01

An increasing number of countries are developing front-of-package (FOP) labels; however, there is limited evidence examining the impact of specific design characteristics for these labels. The current study investigated consumer perceptions of several FOP label design characteristics, including potential differences among sociodemographic sub-groups. Two hundred and thirty-four participants aged 16 years or older completed nine label rating tasks on a laptop at a local shopping mall in Canada. The rating tasks asked participants to rate five primary design characteristics (border, background presence, background colour, 'caution' symbol and government attribution) on their noticeability, readability, believability and likelihood of changing their beverage choice. FOP labels with a border, solid background and contrasting colours increased noticeability. A solid background increased readability, while a contrasting background colour reduced it. Both a 'caution' symbol and a government attribution increased the believability of the labels and the perceived likelihood of influencing beverage choice. The effect of the design characteristics was generally similar across sociodemographic groups, with modest differences in five of the nine outcomes. Label design characteristics, such as the use of a border, colour and symbols can enhance the salience of FOP nutrition labels and may increase the likelihood that FOP labels are used by consumers.

Taguchi's off line method and Multivariate loss function approach for quality management and optimization of process parameters -A review

NASA Astrophysics Data System (ADS)

Bharti, P. K.; Khan, M. I.; Singh, Harbinder

2010-10-01

Off-line quality control is considered to be an effective approach to improve product quality at a relatively low cost. The Taguchi method is one of the conventional approaches for this purpose. Through this approach, engineers can determine a feasible combination of design parameters such that the variability of a product's response can be reduced and the mean is close to the desired target. The traditional Taguchi method was focused on ensuring good performance at the parameter design stage with one quality characteristic, but most products and processes have multiple quality characteristics. The optimal parameter design minimizes the total quality loss for multiple quality characteristics. Several studies have presented approaches addressing multiple quality characteristics. Most of these papers were concerned with maximizing the parameter combination of signal to noise (SN) ratios. The results reveal the advantages of this approach are that the optimal parameter design is the same as the traditional Taguchi method for the single quality characteristic; the optimal design maximizes the amount of reduction of total quality loss for multiple quality characteristics. This paper presents a literature review on solving multi-response problems in the Taguchi method and its successful implementation in various industries.

Up-and-down designs for phase I clinical trials

PubMed Central

Liu, Suyu; Cai, Chunyan; Ning, Jing

2014-01-01

Various up-and-down designs have been proposed to improve the operating characteristics of the traditional “3+3” design, but they have been of limited use in practice. A major impediment to the adoption of the improved up-and-down designs is a lack of general guidance and a comprehensive assessment of the operating characteristics of these designs under practical clinical settings. To fill this gap, we review six up-and-down designs: the “3+3” design, accelerated titration design, biased coin design, k-in-a-row design, group up-and-down design and cumulative group up-and-down design. We conduct comprehensive simulation studies to evaluate their operating characteristics under various practical settings, and compare their performance to a theoretical optimal bound of nonparametric designs. The results show that the cumulative group up-and-down design has the best overall performance in terms of selecting the maximum tolerated dose (MTD), assigning patients to the MTD and patient safety. Its performance is generally close to the upper bound of nonparametric designs, but improvement seems possible in some cases. PMID:23856381

Vehicle operation characteristic under different ramp entrance conditions in underground road: Analysis, simulation and modelling

NASA Astrophysics Data System (ADS)

Yao, Qiming; Liu, Shuo; Liu, Yang

2018-05-01

An experimental design was used to study the vehicle operation characteristics of different ramp entrance conditions in underground road. With driving simulator, the experimental scenarios include left or right ramp with first, second and third service level, respectively, to collect vehicle speed, acceleration, lateral displacement and location information at the ramp entrance section. By using paired t-test and ANOVA, the influence factors of vehicle operating characteristics are studied. The result shows that effects of ramp layout and mainline traffic environment on vehicle operation characteristics are significant. The regression model of vehicle traveling distance on acceleration lane is established. Suggestions are made for ramp entrance design of underground road.

The Metamorphosis of Industrial Designers from Novices to Experts

ERIC Educational Resources Information Center

Wong, Ju-Joan; Chen, Po-Yu; Chen, Chun-Di

2016-01-01

Professional training for designers is crucial in the field of design studies. The characteristics of novices versus those of expert designers have been identified in the literature; however, studies exploring the issue of professional training processes in the actual workplace are not well developed. Our study addresses the topic by using…

Empirical studies of software design: Implications for SSEs

NASA Technical Reports Server (NTRS)

Krasner, Herb

1988-01-01

Implications for Software Engineering Environments (SEEs) are presented in viewgraph format for characteristics of projects studied; significant problems and crucial problem areas in software design for large systems; layered behavioral model of software processes; implications of field study results; software project as an ecological system; results of the LIFT study; information model of design exploration; software design strategies; results of the team design study; and a list of publications.

Solar thermoelectric generators

NASA Technical Reports Server (NTRS)

1977-01-01

The methods, the findings and the conclusions of a study for the design of a Solar Thermoelectric Generator (STG) intended for use as a power source for a spacecraft orbiting the planet Mercury are discussed. Several state-of-the-art thermoelectric technologies in the intended application were considered. The design of various STG configurations based on the thermoelectric technology selected from among the various technologies was examined in detail and a recommended STG design was derived. The performance characteristics of the selected STG technology and associated design were studied in detail as a function of the orbital characteristics of the STG in Mercury and throughout the orbit of Mercury around the sun.

Investigation of aerodynamic characteristics of subsonic wings

NASA Technical Reports Server (NTRS)

Dejarnette, F. R.; Frink, N. T.

1979-01-01

An analytical strake design procedure is investigated. A numerical solution to the governing strake design equation is used to generate a series of strakes which are tested in a water tunnel to study their vortex breakdown characteristics. The strakes are scaled for use on a half-scale model of the NASA-LaRC general research fuselage with a 44 degrees trapezoidal wing. An analytical solution to the governing design equation is obtained. The strake design procedure relates the potential-flow leading-edge suction and pressure distributions to vortex stability. Several suction distributions are studied and those which are more triangular and peak near the tip generate strakes that reach higher angles of attack before vortex breakdown occurs at the wing trailing edge. For the same suction distribution, a conical rather than three dimensional pressure specification results in a better strake shape as judged from its vortex breakdown characteristics.

Mechanistic-Empirical Pavement Design Guide Flexible Pavement Performance Prediction Models Volume III Field Guide - Calibration and User's Guide for the Mechanistic-Empirical Pavement Design Guide

DOT National Transportation Integrated Search

2007-08-01

The objective of this research study was to develop performance characteristics or variables (e.g., ride quality, rutting, : fatigue cracking, transverse cracking) of flexible pavements in Montana, and to use these characteristics in the : implementa...

Techniques to improve maneuver stability characteristics of a nonlinear wide-body transport airplane in cruise flight

NASA Technical Reports Server (NTRS)

Grantham, William D.; Person, Lee H., Jr.; Bailey, Melvin L.; Tingas, Stephen A.

1994-01-01

The maneuver control stability characteristics of an aircraft are a flying qualities parameter of critical importance, to ensure structural protection as well as adequate predictability to the pilot. Currently, however, maneuver stability characteristics are not uniquely addressed in the Federal Aviation Regulations (FAR) Part 25, for transport aircraft. In past transport category certification programs, the Federal Aviation Administration (FAA) has used a combination of requirements (longitudinal control, vibration and buffeting, high-speed characteristics, and out-of-trim characteristics) to ensure safe and controllable maneuver stability characteristics over a range of flight conditions and airplane configurations. Controversies exist regarding each of these regulations, however, and considerable expenditures in terms of design studies and testing time have resulted from the requirements. It is also recognized that additional engineering guidance is needed for identifying acceptable nonlinear maneuver stability characteristics, particularly as they relate to relaxed stability, highly augmented transport configurations. The current trend in large aircraft design is toward relaxed, or even negative, static margins for improved fuel efficiency. The advanced flight control systems developed for these aircraft, in many instances, have rendered current aforementioned maneuver stability criteria either too stringent or of little practical use. Current design requirements do not account for these advanced designs. The objective was to evaluate a broad spectrum of linear and nonlinear longitudinal stability characteristics to generate data for defining satisfactory and unacceptable maneuver characteristics, as defined by pilot opinion. Primary emphasis was placed on two techniques of varying column force per normal acceleration. This study was a joint venture with four pilots participating; one from NASA, one from the FAA, and two from industry.

A review of hospital characteristics associated with improved performance.

PubMed

Brand, Caroline A; Barker, Anna L; Morello, Renata T; Vitale, Michael R; Evans, Sue M; Scott, Ian A; Stoelwinder, Johannes U; Cameron, Peter A

2012-10-01

The objective of this review was to critically appraise the literature relating to associations between high-level structural and operational hospital characteristics and improved performance. The Cochrane Library, MEDLINE (Ovid), CINAHL, proQuest and PsychINFO were searched for articles published between January 1996 and May 2010. Reference lists of included articles were reviewed and key journals were hand searched for relevant articles. and data extraction Studies were included if they were systematic reviews or meta-analyses, randomized controlled trials, controlled before and after studies or observational studies (cohort and cross-sectional) that were multicentre, comparative performance studies. Two reviewers independently extracted data, assigned grades of evidence according to the Australian National Health and Medical Research Council guidelines and critically appraised the included articles. Data synthesis Fifty-seven studies were reported within 12 systematic reviews and 47 observational articles. There was heterogeneity in use and definition of performance outcomes. Hospital characteristics investigated were environment (incentives, market characteristics), structure (network membership, ownership, teaching status, geographical setting, service size) and operational design (innovativeness, leadership, organizational culture, public reporting and patient safety practices, information technology systems and decision support, service activity and planning, workforce design, staff training and education). The strongest evidence for an association with overall performance was identified for computerized physician order entry systems. Some evidence supported the associations with workforce design, use of financial incentives, nursing leadership and hospital volume. There is limited, mainly low-quality evidence, supporting the associations between hospital characteristics and healthcare performance. Further characteristic-specific systematic reviews are indicated.

Designscholar: Examining Creative Thinking in an Online Learning Community for Interior Design Graduate Students

ERIC Educational Resources Information Center

Ransdell, Marlo Evelyn

2009-01-01

This study examined the creative thinking of interior design graduate students in an online learning community. This study considered potential changes in creative thinking (fluency, flexibility, originality, and elaboration) about design research resulting from peer-led online discussions. It further studied the learner characteristics of…

Young Tanzanians and the Cinema: A Study of the Effects of Selected Basic Motion Picture Elements and Population Characteristics on Filmic Comprehension of Tanzanian Adolescent Primary School Children.

ERIC Educational Resources Information Center

Giltrow, David Roger

A study was conducted of Tanzanian adolescent school children's responses to filmic elements. The design included a very large sample in a complicated factorial design, varying such factors as color, type of action, background and sound of the film, and the demographic characteristics of the subjects. Results showed that of these variables,…

Characteristics of Highly Talented International Business Professionals Defined: Qualitative Study among International Business Professionals

ERIC Educational Resources Information Center

van Heugten, Petra; Heijne-Penninga, Marjolein; Paans, Wolter; Wolfensberger, Marca

2016-01-01

Purpose: The purpose of this paper is to explore the characteristics of talent in relation to international business to facilitate selection and development of talent in human resources (HR) and human resource development (HRD). Design/methodology/approach: A mixed method design was used: focus groups with business professionals to identify the…

Improving Service Delivery: Investigating the Role of Information Sharing, Job Characteristics, and Employee Satisfaction

ERIC Educational Resources Information Center

Bontis, Nick; Richards, David; Serenko, Alexander

2011-01-01

Purpose: The purpose of this study is to propose and test a model designed to investigate the impact of job characteristics, employee satisfaction, and information sharing on two key indicators of quality service delivery, such as worker perceptions of their efficiency and customer focus. Design/methodology/approach: During the project, 9,060…

Analytical design and performance studies of nuclear furnace tests of small nuclear light bulb models

NASA Technical Reports Server (NTRS)

Latham, T. S.; Rodgers, R. J.

1972-01-01

Analytical studies were continued to identify the design and performance characteristics of a small-scale model of a nuclear light bulb unit cell suitable for testing in a nuclear furnace reactor. Emphasis was placed on calculating performance characteristics based on detailed radiant heat transfer analyses, on designing the test assembly for ease of insertion, connection, and withdrawal at the reactor test cell, and on determining instrumentation and test effluent handling requirements. In addition, a review of candidate test reactors for future nuclear light bulb in-reactor tests was conducted.

Professional School Counseling (PSC) Publication Pattern Review: A Meta-Study of Author and Article Characteristics from the First 15 Years

ERIC Educational Resources Information Center

Erford, Bradley T.; Giguere, Monica; Glenn, Kacie; Ciarlone, Hallie

2015-01-01

Patterns of articles published in "Professional School Counseling" (PSC) from the first 15 volumes were reviewed in this meta-study. Author characteristics (e.g., sex, employment setting, nation of domicile) and article characteristics (e.g., topic, type, design, sample, sample size, participant type, statistical procedures and…

Effect of wing design on the longitudinal aerodynamic characteristics of a wing-body model at subsonic speeds

NASA Technical Reports Server (NTRS)

Henderson, W. P.; Huffman, J. K.

1972-01-01

An investigation has been conducted to determine the effects of wing camber and twist on the longitudinal aerodynamic characteristics of a wingbody configuration. Three wings were used each having the same planform (aspect ratio of 2.5 and leading-edge sweep angle of 44 deg.) but differing in amounts of camber and twist (wing design lift coefficient). The wing design lift coefficients were 0, 0.35, and 0.70. The investigation was conducted over a Mach number range from 0.20 to 0.70 at angles of attack up to about 22 deg. The effect of wing strakes on the aerodynamic characteristics of the cambered wings was also studied. A comparison of the experimentally determined aerodynamic characteristics with theoretical estimates is also included.

The Impact of Housing on the Characteristics of Ceramic Pressure Sensors—An Issue of Design for Manufacturability

PubMed Central

Santo Zarnik, Marina; Belavic, Darko; Novak, Franc

2015-01-01

An exploratory study of the impact of housing on the characteristics of a low-temperature co-fired ceramic (LTCC) pressure sensor is presented. The ceramic sensor structure is sealed in a plastic housing. This may have non-negligible effect on the final characteristics and should be considered in the early design phase. The manufacturability issue mainly concerning the selection of available housing and the most appropriate materials was considered with respect to different requirements for low and high pressure ranges of operation. Numerical predictions showed the trends and helped reveal the critical design parameters. Proper selection of the adhesive material remains an essential issue. Curing of the epoxy adhesive may introduce non-negligible residual stresses, which considerably influence the sensor’s characteristics. PMID:26694386

78 FR 25710 - Applications for New Awards; Strengthening Institutions Program (SIP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-02

... priority in this notice: Carefully matched comparison group design means a type of quasi- experimental... notice). More specifically, it is a design in which project participants are matched with non... group study. When designing their study, applicants should consider participant characteristics relevant...

A Quality Assurance Initiative for Commercial-Scale Production in High-Throughput Cryopreservation of Blue Catfish Sperm

PubMed Central

Hu, E; Liao, T. W.; Tiersch, T. R.

2013-01-01

Cryopreservation of fish sperm has been studied for decades at a laboratory (research) scale. However, high-throughput cryopreservation of fish sperm has recently been developed to enable industrial-scale production. This study treated blue catfish (Ictalurus furcatus) sperm high-throughput cryopreservation as a manufacturing production line and initiated quality assurance plan development. The main objectives were to identify: 1) the main production quality characteristics; 2) the process features for quality assurance; 3) the internal quality characteristics and their specification designs; 4) the quality control and process capability evaluation methods, and 5) the directions for further improvements and applications. The essential product quality characteristics were identified as fertility-related characteristics. Specification design which established the tolerance levels according to demand and process constraints was performed based on these quality characteristics. Meanwhile, to ensure integrity throughout the process, internal quality characteristics (characteristics at each quality control point within process) that could affect fertility-related quality characteristics were defined with specifications. Due to the process feature of 100% inspection (quality inspection of every fish), a specific calculation method, use of cumulative sum (CUSUM) control charts, was applied to monitor each quality characteristic. An index of overall process evaluation, process capacity, was analyzed based on in-control process and the designed specifications, which further integrates the quality assurance plan. With the established quality assurance plan, the process could operate stably and quality of products would be reliable. PMID:23872356

Demographics Affecting Parental Expectations from Early Deaf Intervention

ERIC Educational Resources Information Center

Ingber, Sara; Dromi, Esther

2009-01-01

Parent participation in rehabilitation programs for children with special needs requires program designers to accommodate each family's particular needs and characteristics. This study investigated maternal reports on various characteristics of 50 Israeli deaf preschoolers, their parents, and families, and examined these characteristics' links…

The healthy men study: design and recruitment considerations for environmental epidemiologic studies in male reproductive health

EPA Science Inventory

Study Objective: To describe study conduct and response and participant characteristics. Design: Prospective cohort study. Setting: Participants were male partners of women enrolled in a community-based study of drinking water disinfection by-products and pregnancy healt...

Impact of Design Trade Studies on System Human Resources.

ERIC Educational Resources Information Center

Whalen, Gary V.; Askren, William B.

This study focused on two objectives. The first objective was to identify and classify the characteristics of conceptual design trade studies that have high potential impact on human resource requirements of Air Force weapon systems. The approach used was a case history review and analysis of 129 F-15 aircraft design trade studies. The analysis…

A decade of adult intensive care unit design: a study of the physical design features of the best-practice examples.

PubMed

Rashid, Mahbub

2006-01-01

This article reports a study of the physical design characteristics of a set of adult intensive care units (ICUs), built between 1993 and 2003. These ICUs were recognized as the best-practice examples by the Society of Critical Care Medicine, the American Association of Critical Care Nurses, and the American Institute of Architects. This study is based on a systematic analysis of the materials found on these ICUs in the booklet and videos jointly published by the above organizations in 2005. The study finds that most of these examples of best-practice adult ICUs have the following negative characteristics: (1) they are built as renovation projects with more health and safety hazards during construction; (2) most of them are mixed-service units with more safety and staffing problems; (3) the overall layout and the layout of staff work areas in these ICUs do not have any common design solutions for improved patient and staff outcomes; and (4) in these ICUs, family space is often located outside the unit, and family access to the patient room is restricted, even though family presence at the bedside may be important for improved patient outcomes. Some of these negative characteristics are offset by the following positive characteristics in most ICUs: (1) they have only private patient rooms for improved patient care, safety, privacy, and comfort; (2) most patient beds are freestanding for easy access to patients from all sides; (3) they have handwashing sinks and waste disposal facilities in the patient room for improved safety; and (4) most patient rooms have natural light to help patients with circadian rhythms. The article discusses, in detail, the implications of its findings, and the role of the ICU design community in a very complicated design context.

Research on temperature control and influence of the vacuum tubes with inserted tubes solar heater

NASA Astrophysics Data System (ADS)

Xiao, L. X.; He, Y. T.; Hua, J. Q.

2017-11-01

A novel snake-shape vacuum tube with inserted tubes solar collector is designed in this paper, the heat transfer characteristics of the collector are analyzed according to its structural characteristics, and the influence of different working temperature on thermal characteristics of the collector is studied. The solar water heater prototype consisting of 14 vacuum tubes with inserted tubes is prepared, and the hot water storage control subsystem is designed by hysteresis comparison algorithm. The heat characteristic of the prototype was experimentally studied under hot water output temperature of 40-45°C, 50-55°C and 60-65°C. The daily thermal efficiency was 64%, 50% and 46%, respectively. The experimental results are basically consistent with the theoretical analysis.

Postpolio Syndrome: Using a Single Case Study

ERIC Educational Resources Information Center

Obringer, S. John; Elrod, G. Franklin

2004-01-01

The purpose of this study was to identify the major characteristics of postpolio syndrome (PPS), investigate physical and psychological limitations, and comprehensively review current medical interventions through a single subject design. The study addresses the symptoms and characteristics, the effect on life style, and the current recommended…

Configuration design studies and wind tunnel tests of an energy efficient transport with a high-aspect-ratio supercritical wing

NASA Technical Reports Server (NTRS)

Henne, P. A.; Dahlin, J. A.; Peavey, C. C.; Gerren, D. S.

1982-01-01

The results of design studies and wind tunnel tests of high aspect ratio supercritical wings suitable for a medium range, narrow body transport aircraft flying near M=0.80 were presented. The basic characteristics of the wing design were derived from system studies of advanced transport aircraft where detailed structural and aerodynamic tradeoffs were used to determine the most optimum design from the standpoint of fuel usage and direct operating cost. These basic characteristics included wing area, aspect ratio, average thickness, and sweep. The detailed wing design was accomplished through application of previous test results and advanced computational transonic flow procedures. In addition to the basic wing/body development, considerable attention was directed to nacelle/plyon location effects, horizontal tail effects, and boundary layer transition effects. Results of these tests showed that the basic cruise performance objectives were met or exceeded.

Professional Development for Design-Based Learning in Engineering Education: A Case Study

ERIC Educational Resources Information Center

Gómez Puente, Sonia M.; van Eijck, Michiel; Jochems, Wim

2015-01-01

Design-based learning (DBL) is an educational approach in which students gather and apply theoretical knowledge to solve design problems. In this study, we examined how critical DBL dimensions (project characteristics, design elements, the teacher's role, assessment, and social context) are applied by teachers in the redesign of DBL projects.…

"A Passion to Mold Young People": A Mixed-Methods Study of Iowa Community College Athletics Coaches' Profile Characteristics

ERIC Educational Resources Information Center

Kollasch, Korey

2017-01-01

This study focused on building a profile of characteristics of community college (CC) athletics coaches in Iowa and on exploring the possible relationships among these characteristics. Using a mixed-method research design that incorporates SPSS quantitative analysis of a survey and seven semi-structured interviews, the research data draws a…

Project Exodus

NASA Technical Reports Server (NTRS)

1990-01-01

Project Exodus is an in-depth study to identify and address the basic problems of a manned mission to Mars. The most important problems concern propulsion, life support, structure, trajectory, and finance. Exodus will employ a passenger ship, cargo ship, and landing craft for the journey to Mars. These three major components of the mission design are discussed separately. Within each component the design characteristics of structures, trajectory, and propulsion are addressed. The design characteristics of life support are mentioned only in those sections requiring it.

Research design features and patient characteristics associated with the outcome of antidepressant clinical trials.

PubMed

Khan, Arif; Kolts, Russell L; Thase, Michael E; Krishnan, K Ranga Rama; Brown, Walter

2004-11-01

The authors examined which, if any, research design features and patient characteristics would significantly differ between successful and unsuccessful antidepressant trials. Clinical trial data were reviewed for nine antidepressants approved by the Food and Drug Administration between 1985 and 2000. From the antidepressant research programs on these medications, 52 clinical trials were included in the study. The authors evaluated trial design features, patient characteristics, and difference in response between placebo and antidepressant. Nine trial design features and patient characteristics were present in the research programs for all nine of the antidepressants. The severity of depressive symptoms before patient randomization, the dosing schedule (flexible versus fixed), the number of treatment arms, and the percentage of female patients were significantly associated with the difference in response to antidepressant and placebo. The duration of the antidepressant trial, number of patients per treatment arm, number of sites, and mean age of the patients were similar in successful trials (with a greater antidepressant-placebo difference) and less successful trials (with a smaller antidepressant-placebo difference). These findings may help in the design of future antidepressant trials.

An Analytical Design Method for a Regenerative Braking Control System for DC-electrified Railway Systems under Light Load Conditions

NASA Astrophysics Data System (ADS)

Saito, Tatsuhito; Kondo, Keiichiro; Koseki, Takafumi

A DC-electrified railway system that is fed by diode rectifiers at a substation is unable to return the electric power to an AC grid. Accordingly, the braking cars have to restrict regenerative braking power when the power consumption of the powering cars is not sufficient. However, the characteristics of a DC-electrified railway system, including the powering cars, is not known, and a mathematical model for designing a controller has not been established yet. Hence, the object of this study is to obtain the mathematical model for an analytical design method of the regenerative braking control system. In the first part of this paper, the static characteristics of this system are presented to show the position of the equilibrium point. The linearization of this system at the equilibrium point is then performed to describe the dynamic characteristics of the system. An analytical design method is then proposed on the basis of these characteristics. The proposed design method is verified by experimental tests with a 1kW class miniature model, and numerical simulations.

Research on Automatic Ticketing Interface Design of Tianjin South Station under the Background of Aging

NASA Astrophysics Data System (ADS)

Zhenghui, Zhao

2018-04-01

Based on the context of increasingly serious aging problem in China, the psychological characteristics of elders in using public self-service facilities and the development status and the future trend of public self-service ticketing service. The approach is analysing physiological and psychological characteristics, education level of the elderly and studying its characteristics of consumer psychology and regional cultural characteristics profoundly before conducting comprehensive analysis and research in combination with the interface features of public self-service ticketing machine. The interface design will be more personalized, intelligent, regional and international. Strategies of caring for the elderly in the regional public self-service facility interface design innovation develops the concept of taking care of the elderly in the entire region as an indispensable people-benefiting optimization system in the modern social services.

The basic characteristics of hybrid aircraft. [structural design criteria and weight analysis of airships for materials handling

NASA Technical Reports Server (NTRS)

Nichols, J. B.

1975-01-01

The transportation of very heavy or very bulky loads by airships, and the ability to carry out extended duration flights at low speeds and low costs was studied. Structural design and weight factors for airship construction are examined. The densities of various light gases to be used in airships are given, along with their lifting capacities. The aerodynamic characteristics of various airship configurations was studied. Propulsion system requirements for airships are briefly considered.

Frontline Nurse Engagement and Empowerment: Characteristics and Processes for Building Leadership Capacity.

PubMed

Riley, Bettina H; Dearmon, Valorie; Mestas, Lisa; Buckner, Ellen B

2016-01-01

Improving health care quality is the responsibility of nurses at all levels of the organization. This article describes a study that examined frontline staff nurses' professional practice characteristics to advance leadership through the understanding of relationships among practice environment, quality improvement, and outcomes. The study design was a descriptive quantitative design at 2 time points. Findings support the use of research and quality processes to build leadership capacity required for positive resolution of interdisciplinary operational failures.

On-Line Critiques in Collaborative Design Studio

ERIC Educational Resources Information Center

Sagun, Aysu; Demirkan, Halime

2009-01-01

In this study, the Design Collaboration Model (DCM) was developed to provide a medium for the on-line collaboration of the design courses. The model was based on the situated and reflective practice characteristics of the design process. The segmentation method was used to analyse the design process observed both in the design diaries and the…

Wayside energy storage study. Volume 4 : dual-mode locomotive : preliminary design study

DOT National Transportation Integrated Search

1979-02-01

A preliminary design study was conducted to confirm the technical viability and economic attractiveness of the dual-mode locomotive concept based on the most common U.S. road locomotive, the SD40-2. The study examined the existing characteristics of ...

Comparison of direct current and 50 Hz alternating current microscopic corona characteristics on conductors

NASA Astrophysics Data System (ADS)

Zhang, Shuai; Zhang, Bo; He, Jinliang

2014-06-01

Corona discharge is one of the major design factors for extra-high voltage and ultra-high voltage DC/AC transmission lines. Under different voltages, corona discharge reveals different characteristics. This paper aims at investigating DC and AC coronas on the microscopic scale. To obtain the specific characteristics of DC and AC coronas, a new measurement approach that utilizes a coaxial wire-cylinder corona cage is designed in this paper, and wires of different diameters are used in the experiment. Based on the measurements, the respective microscopic characteristics of DC and AC coronas are analyzed and compared. With differences in characteristics between DC and AC coronas proposed, this study provides useful insights into DC/AC corona discharges on transmission line applications.

Space tug point design study. Volume 2: Operations, performance and requirements

NASA Technical Reports Server (NTRS)

1973-01-01

A design study to determine the configuration and characteristics of a space tug was conducted. Among the subjects analyzed in the study are: (1) flight and ground operations, (2) vehicle flight performance and performance enhancement techniques, (3) flight requirements, (4) basic design criteria, and (5) functional and procedural interface requirements between the tug and other systems.

An experimental and theoretical study of structural damping in compliant foil bearings

NASA Technical Reports Server (NTRS)

Ku, C.-P. Roger

1994-01-01

This paper describes an experimental investigation into the dynamic characteristics of corrugated foil (bump foil) strips used in compliant surface foil bearings. This study provided and opportunity to quantify the structural damping of bump foil strips. The experimental data were compared to results obtained by a theoretical model developed earlier. The effects of bearing design parameters, such as static loads, dynamic displacement amplitudes, bump configurations, pivot locations, surface coatings, and lubricant were also evaluated. An understanding of the dynamic characteristics of bump foil strips resulting from this work offers designers a means for enhancing the design of high-performance compliant foil bearings.

The utility of rural and underserved designations in geospatial assessments of distance traveled to healthcare services: implications for public health research and practice.

PubMed

Smith, Matthew Lee; Dickerson, Justin B; Wendel, Monica L; Ahn, Sangnam; Pulczinski, Jairus C; Drake, Kelly N; Ory, Marcia G

2013-01-01

Health disparities research in rural populations is based on several common taxonomies identified by geography and population density. However, little is known about the implications of different rurality definitions on public health outcomes. To help illuminate the meaning of different rural designations often used in research, service delivery, or policy reports, this study will (1) review the different definitions of rurality and their purposes; (2) identify the overlap of various rural designations in an eight-county Brazos Valley region in Central Texas; (3) describe participant characteristic profiles based on distances traveled to obtain healthcare services; and (4) examine common profile characteristics associated with each designation. Data were analyzed from a random sample from 1,958 Texas adults participating in a community assessment. K-means cluster analysis was used to identify natural groupings of individuals based on distance traveled to obtain three healthcare services: medical care, dental care, and prescription medication pick-up. Significant variation in cluster representation and resident characteristics was observed by rural designation. Given widely used taxonomies for designating areas as rural (or provider shortage) in health-related research, this study highlights differences that could influence research results and subsequent program and policy development based on rural designation.

Behavioral headache research: methodologic considerations and research design alternatives.

PubMed

Hursey, Karl G; Rains, Jeanetta C; Penzien, Donald B; Nash, Justin M; Nicholson, Robert A

2005-05-01

Behavioral headache treatments have garnered solid empirical support in recent years, but there is substantial opportunity to strengthen the next generation of studies with improved methods and consistency across studies. Recently, Guidelines for Trials of Behavioral Treatments for Recurrent Headache were published to facilitate the production of high-quality research. The present article compliments the guidelines with a discussion of methodologic and research design considerations. Since there is no research design that is applicable in every situation, selecting an appropriate research design is fundamental to producing meaningful results. Investigators in behavioral headache and other areas of research consider the developmental phase of the research, the principle objectives of the project, and the sources of error or alternative interpretations in selecting a design. Phases of clinical trials typically include pilot studies, efficacy studies, and effectiveness studies. These trials may be categorized as primarily pragmatic or explanatory. The most appropriate research designs for these different phases and different objectives vary on such characteristics as sample size and assignment to condition, types of control conditions, periods or frequency of measurement, and the dimensions along which comparisons are made. A research design also must fit within constraints on available resources. There are a large number of potential research designs that can be used and considering these characteristics allows selection of appropriate research designs.

User-Interface Design Characteristics of Fortune 500 B2C E-Commerce Sites and Industry Differences

ERIC Educational Resources Information Center

Zhao, Jensen J.; Truell, Allen D.; Alexander, Melody W.

2006-01-01

This study examined the user-interface design characteristics of 107 Fortune 500 B2C e-commerce Web sites and industry differences. Data were collected from corporate homepages, B2C product/service pages, B2C interactive shopping pages, as well as customer satisfaction of 321 online shoppers. The findings indicate that (a) to attract online…

Study of Designing BPF by Using LC Tap-Coupling Resonators

NASA Astrophysics Data System (ADS)

Yasuzumi, Takenori; Wada, Kouji; Nakajima, Naoko; Hashimoto, Osamu

The resonance characteristics of short-ended half-wavelength coplanar waveguide(CPW) LC tap-coupling resonators are examined theoretically and experimentally. The characteristics near the passband have been improved by applying the presented CPW resonator to a design of a bandpass filter(BPF). Moreover, the difference between the calculation and the measurement results is examined by using the equivalent circuit about the presented BPF.

Orbit transfer vehicle advanced expander cycle engine point design study. Volume 2: Study results

NASA Technical Reports Server (NTRS)

Diem, H. G.

1980-01-01

The design characteristics of the baseline engine configuration of the advanced expander cycle engine are described. Several aspects of engine optimization are considered which directly impact the design of the baseline thrust chamber. Four major areas of the power cycle optimization are emphasized: main turbine arrangement; cycle engine source; high pressure pump design; and boost pump drive.

Application of characteristic time concepts for hydraulic fracture configuration design, control, and optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Advani, S.H.; Lee, T.S.; Moon, H.

1992-10-01

The analysis of pertinent energy components or affiliated characteristic times for hydraulic stimulation processes serves as an effective tool for fracture configuration designs optimization, and control. This evaluation, in conjunction with parametric sensitivity studies, provides a rational base for quantifying dominant process mechanisms and the roles of specified reservoir properties relative to controllable hydraulic fracture variables for a wide spectrum of treatment scenarios. Results are detailed for the following multi-task effort: (a) Application of characteristic time concept and parametric sensitivity studies for specialized fracture geometries (rectangular, penny-shaped, elliptical) and three-layered elliptic crack models (in situ stress, elastic moduli, and fracturemore » toughness contrasts). (b) Incorporation of leak-off effects for models investigated in (a). (c) Simulation of generalized hydraulic fracture models and investigation of the role of controllable vaxiables and uncontrollable system properties. (d) Development of guidelines for hydraulic fracture design and optimization.« less

Application of characteristic time concepts for hydraulic fracture configuration design, control, and optimization. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Advani, S.H.; Lee, T.S.; Moon, H.

1992-10-01

The analysis of pertinent energy components or affiliated characteristic times for hydraulic stimulation processes serves as an effective tool for fracture configuration designs optimization, and control. This evaluation, in conjunction with parametric sensitivity studies, provides a rational base for quantifying dominant process mechanisms and the roles of specified reservoir properties relative to controllable hydraulic fracture variables for a wide spectrum of treatment scenarios. Results are detailed for the following multi-task effort: (a) Application of characteristic time concept and parametric sensitivity studies for specialized fracture geometries (rectangular, penny-shaped, elliptical) and three-layered elliptic crack models (in situ stress, elastic moduli, and fracturemore » toughness contrasts). (b) Incorporation of leak-off effects for models investigated in (a). (c) Simulation of generalized hydraulic fracture models and investigation of the role of controllable vaxiables and uncontrollable system properties. (d) Development of guidelines for hydraulic fracture design and optimization.« less

Analysis of Selected Characteristics of Faculty Conducted Curriculum Research in Small Colleges. Final Report.

ERIC Educational Resources Information Center

Milliken, Russell A.

The objective of this study was to identify characteristics of researchers and small, undergraduate colleges supportive of curriculum research. A questionnaire, designed to determine professional characteristics of the respondents, and environmental, and organizational factors supportive of curriculum research was mailed to the total faculty of…

An Analysis of Factors Contributing to Achievement in Physics of Secondary Students in Mississippi Schools.

ERIC Educational Resources Information Center

Harpole, Sandra H.; And Others

Designed to examine the factors that contribute to student achievement, this study focused specifically on the relationship between physics achievement and selected teacher characteristics, student characteristics, and school and district characteristics. Questionnaires and attitude surveys were completed by 39 randomly selected Mississippi…

Implementation of a Smart Phone for Motion Analysis.

PubMed

Yodpijit, Nantakrit; Songwongamarit, Chalida; Tavichaiyuth, Nicha

2015-01-01

In today’s information-rich environment, one of the most popular devices is a smartphone. Research has shown significant growth in the use of smartphones and apps all over the world. Accelerometer within smartphone is a motion sensor that can be used to detect human movements. Compared to other major vital signs, gait characteristics represent general health status, and can be determined using smartphones. The objective of the current study is to design and develop the alternative technology that can potentially predict health status and reduce healthcare cost. This study uses a smartphone as a wireless accelerometer for quantifying human motion characteristics from four steps of the system design and development (data acquisition operation, feature extraction algorithm, classifier design, and decision making strategy). Findings indicate that it is possible to extract features from a smartphone’s accelerometer using a peak detection algorithm. Gait characteristics obtain from the peak detection algorithm include stride time, stance time, swing time and cadence. Applications and limitations of this study are also discussed.

Assured crew return vehicle post landing configuration design and test

NASA Technical Reports Server (NTRS)

Anderson, Loren A.; Armitage, Pamela Kay

1992-01-01

The 1991-1992 senior Mechanical and Aerospace Engineering Design class continued work on the post landing configurations for the Assured Crew Return Vehicle (ACRV) and the Emergency Egress Couch (EEC). The ACRV will be permanently docked to Space Station Freedom, fulfilling NASA's commitment of Assured Crew Return Capability in the event of an accident or illness aboard Space Station Freedom. The EEC provides medical support and a transportation surface for an incapacitated crew member. The objective of the projects was to give the ACRV Project Office data to feed into their feasibility studies. Four design teams were given the task of developing models with dynamically and geometrically scaled characteristics. Groups one and two combined effort to design a one-fifth scale model of the Apollo Command Module derivative, an on-board flotation system, and a lift attachment point system. This model was designed to test the feasibility of a rigid flotation and stabilization system and to determine the dynamics associated with lifting the vehicle during retrieval. However, due to priorities, it was not built. Group three designed a one-fifth scale model of the Johnson Space Center (JSC) benchmark configuration, the Station Crew Return Alternative Module (SCRAM) with a lift attachment point system. This model helped to determine the flotation and lifting characteristics of the SCRAM configuration. Group four designed a full scale EEC with changeable geometric and dynamic characteristics. This model provided data on the geometric characteristics of the EEC and on the placement of the CG and moment of inertia. It also gave the helicopter rescue personnel direct input to the feasibility study.

Developing a Conceptual Framework for Participatory Design of Psychosocial and Physical Learning Environments

ERIC Educational Resources Information Center

Mäkelä, Tiina; Helfenstein, Sacha

2016-01-01

The present study shows how the mixed-methods approach can be used in capturing and organising learning environment (LE) characteristics for the participatory design of psychosocial and physical LEs involving learners. Theoretical constructs were tested and further elaborated on in the analysis of two similar educational design research studies:…

Variations in Pedagogical Design of Massive Open Online Courses (MOOCs) across Disciplines

ERIC Educational Resources Information Center

Najafi, Hadieh; Rolheiser, Carol; Håklev, Stian; Harrison, Laurie

2017-01-01

Given that few studies have formally examined pedagogical design considerations of Massive Online Open Courses (MOOCs), this study explored variations in the pedagogical design of six MOOCs offered at the University of Toronto, while considering disciplinary characteristics and expectations of each MOOC. Using a framework (Neumann et al., 2002)…

City Governments and Aging in Place: Community Design, Transportation and Housing Innovation Adoption

ERIC Educational Resources Information Center

Lehning, Amanda J.

2012-01-01

Purpose of the study: To examine the characteristics associated with city government adoption of community design, housing, and transportation innovations that could benefit older adults. Design and methods: A mixed-methods study with quantitative data collected via online surveys from 62 city planners combined with qualitative data collected via…

Permeability Evaluation Through Chitosan Membranes Using Taguchi Design

PubMed Central

Sharma, Vipin; Marwaha, Rakesh Kumar; Dureja, Harish

2010-01-01

In the present study, chitosan membranes capable of imitating permeation characteristics of diclofenac diethylamine across animal skin were prepared using cast drying method. The effect of concentration of chitosan, concentration of cross-linking agent (NaTPP), crosslinking time was studied using Taguchi design. Taguchi design ranked concentration of chitosan as the most important factor influencing the permeation parameters of diclofenac diethylamine. The flux of the diclofenac diethylamine solution through optimized chitosan membrane (T9) was found to be comparable to that obtained across rat skin. The mathematical model developed using multilinear regression analysis can be used to formulate chitosan membranes that can mimic the desired permeation characteristics. The developed chitosan membranes can be utilized as a substitute to animal skin for in vitro permeation studies. PMID:21179329

Permeability evaluation through chitosan membranes using taguchi design.

PubMed

Sharma, Vipin; Marwaha, Rakesh Kumar; Dureja, Harish

2010-01-01

In the present study, chitosan membranes capable of imitating permeation characteristics of diclofenac diethylamine across animal skin were prepared using cast drying method. The effect of concentration of chitosan, concentration of cross-linking agent (NaTPP), crosslinking time was studied using Taguchi design. Taguchi design ranked concentration of chitosan as the most important factor influencing the permeation parameters of diclofenac diethylamine. The flux of the diclofenac diethylamine solution through optimized chitosan membrane (T9) was found to be comparable to that obtained across rat skin. The mathematical model developed using multilinear regression analysis can be used to formulate chitosan membranes that can mimic the desired permeation characteristics. The developed chitosan membranes can be utilized as a substitute to animal skin for in vitro permeation studies.

Social Interaction and the Formation of Entrepreneurial Characteristics: A Case Study in Authentic Enterprise Activity

ERIC Educational Resources Information Center

Yu, Christina W. M.; Man, Thomas W. Y.

2009-01-01

Purpose: This paper is an empirical study which aims to investigate the development of social interaction and their impacts on developing learners' entrepreneurial characteristics throughout their participation in an authentic enterprise activity. Design/methodology/approach: The sample of this study was drawn from the participants of an…

Hospital Nurses' Work Environment Characteristics and Patient Safety Outcomes: A Literature Review.

PubMed

Lee, Seung Eun; Scott, Linda D

2018-01-01

This integrative literature review assesses the relationship between hospital nurses' work environment characteristics and patient safety outcomes and recommends directions for future research based on examination of the literature. Using an electronic search of five databases, 18 studies published in English between 1999 and 2016 were identified for review. All but one study used a cross-sectional design, and only four used a conceptual/theoretical framework to guide the research. No definition of work environment was provided in most studies. Differing variables and instruments were used to measure patient outcomes, and findings regarding the effects of work environment on patient outcomes were inconsistent. To clarify the relationship between nurses' work environment characteristics and patient safety outcomes, researchers should consider using a longitudinal study design, using a theoretical foundation, and providing clear operational definitions of concepts. Moreover, given the inconsistent findings of previous studies, they should choose their measurement methodologies with care.

Professional development for design-based learning in engineering education: a case study

NASA Astrophysics Data System (ADS)

Gómez Puente, Sonia M.; van Eijck, Michiel; Jochems, Wim

2015-01-01

Design-based learning (DBL) is an educational approach in which students gather and apply theoretical knowledge to solve design problems. In this study, we examined how critical DBL dimensions (project characteristics, design elements, the teacher's role, assessment, and social context) are applied by teachers in the redesign of DBL projects. We conducted an intervention for the professional development of the DBL teachers in the Mechanical Engineering and the Electrical Engineering departments. We used the Experiential Learning Cycle as an educational model for the professionalisation programme. The findings show that the programme encouraged teachers to apply the DBL theoretical framework. However, there are some limitations with regard to specific project characteristics. Further research into supporting teachers to develop open-ended and multidisciplinary activities in the projects that support learning is recommended.

Study of crash energy absorption characteristics of inversion tube on passenger vehicle

NASA Astrophysics Data System (ADS)

Liu, Jiandong; Liu, Tao; Yao, Shengjie; Zhao, Rutao

2017-09-01

This article studied the energy absorption characteristics of the inversion tube and acquired the inversion tube design key dimensions under theoretical conditions by performing formula derivation in the quasi-static and dynamic state based on the working principle of the inversion tube: free inversion. The article further adopted HyperMesh and LS-Dyna to perform simulation and compared the simulation result with the theoretical calculating value for comparison. The design was applied in the full-vehicle model to perform 50km/h front fullwidth crash simulation. The findings showed that the deformation mode of the inversion tube in the full-vehicle crash was consistent with the design mode, and the inversion tube absorbed 33.0% of total energy, thereby conforming to the vehicle safety design requirements.

Study of fuel cell powerplant with heat recovery

NASA Technical Reports Server (NTRS)

King, J. M.; Grasso, A. P.; Clausi, J. V.

1975-01-01

It was shown that heat can be recovered from fuel cell power plants by replacing the air-cooled heat exchangers in present designs with units which transfer the heat to the integrated utility system. Energy availability for a 40-kW power plant was studied and showed that the total usable energy at rated power represents 84 percent of the fuel lower heating value. The effects of design variables on heat availability proved to be small. Design requirements were established for the heat recovery heat exchangers, including measurement of the characteristics of two candidate fuel cell coolants after exposure to fuel cell operating conditions. A heat exchanger test program was defined to assess fouling and other characteristics of fuel cell heat exchangers needed to confirm heat exchanger designs for heat recovery.

Comparison of direct current and 50 Hz alternating current microscopic corona characteristics on conductors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Shuai, E-mail: zhangshuai94@gmail.com; Zhang, Bo, E-mail: shizbcn@mail.tsinghua.edu.cn; He, Jinliang, E-mail: hejl@tsinghua.edu.cn

Corona discharge is one of the major design factors for extra-high voltage and ultra-high voltage DC/AC transmission lines. Under different voltages, corona discharge reveals different characteristics. This paper aims at investigating DC and AC coronas on the microscopic scale. To obtain the specific characteristics of DC and AC coronas, a new measurement approach that utilizes a coaxial wire-cylinder corona cage is designed in this paper, and wires of different diameters are used in the experiment. Based on the measurements, the respective microscopic characteristics of DC and AC coronas are analyzed and compared. With differences in characteristics between DC and ACmore » coronas proposed, this study provides useful insights into DC/AC corona discharges on transmission line applications.« less

The Relationship between the Entrepreneurship Characteristics and Metacognitive Awareness Levels of Pre-Service Teachers

ERIC Educational Resources Information Center

Duman, Burcu

2018-01-01

The purpose of this study is to determine the relationship between the entrepreneurship characteristics and metacognitive awareness levels of pre-service teachers. Qualitative research method is used in this study and the study is designed as a relational survey. The sample of the study was 441 pre-service teachers studying at the faculty of…

DEMOGRAPHIC CHARACTERISTICS OF THE NHEXAS-ARIZONA BORDER STUDY POPULATION

EPA Science Inventory

The NHEXAS-Arizona Border Study employed a population based probability design to recruit a representative cohort residing within 40 Km of the US-Mexico Border in Arizona. As an extension of the NHEXAS Arizona statewide survey, the border study was designed to determine the dis...

Nanogel Carrier Design for Targeted Drug Delivery

PubMed Central

Eckmann, D. M.; Composto, R. J.; Tsourkas, A.; Muzykantov, V. R.

2014-01-01

Polymer-based nanogel formulations offer features attractive for drug delivery, including ease of synthesis, controllable swelling and viscoelasticity as well as drug loading and release characteristics, passive and active targeting, and the ability to formulate nanogel carriers that can respond to biological stimuli. These unique features and low toxicity make the nanogels a favorable option for vascular drug targeting. In this review, we address key chemical and biological aspects of nanogel drug carrier design. In particular, we highlight published studies of nanogel design, descriptions of nanogel functional characteristics and their behavior in biological models. These studies form a compendium of information that supports the scientific and clinical rationale for development of this carrier for targeted therapeutic interventions. PMID:25485112

Characteristics of Successful Community College Students

ERIC Educational Resources Information Center

Forman, Scheherazade West

2009-01-01

The purpose of this quantitative study was to find predictors of student success. Using a predictive correlational design, the intent of the study was to find the relationships between the dichotomous dependent variable with the categories, degree recipients and non-degree recipients, and the independent variables, student characteristics and risk…

Job Characteristics, Work Involvement, and Job Performance of Public Servants

ERIC Educational Resources Information Center

Johari, Johanim; Yahya, Khulida Kirana

2016-01-01

Purpose: The primary purpose of this study is to assess the predicting role of job characteristics on job performance. Dimensions in the job characteristics construct are skill variety, task identity, task significance, autonomy and feedback. Further, work involvement is tested as a mediator in the hypothesized link. Design/methodology/approach: A…

Developing a Teacher Characteristics Scale

ERIC Educational Resources Information Center

Yaratan, Hüseyin; Muezzin, Emre

2016-01-01

It is a known fact that every profession needs to be developed during its practice. To be able to acquire this we need to know the characteristics of teachers related to their professional development. For this purpose this study tries to develop a scale to measure teacher characteristics which would help in designing in-service training programs…

Design of inside cut von koch fractal UWB MIMO antenna

NASA Astrophysics Data System (ADS)

Tharani, V.; Shanmuga Priya, N.; Rajesh, A.

2017-11-01

An Inside Cut Hexagonal Von Koch fractal MIMO antenna is designed for UWB applications and its characteristics behaviour are studied. Self-comparative and space filling properties of Koch fractal structure are utilized in the antenna design which leads to the desired miniaturization and wideband characteristics. The hexagonal shaped Von Koch Fractal antenna with Defected Ground Structure (DGS) is designed on FR4 substrate with a compact size of 30mm x 20mm x 1.6mm. The antenna achieves a maximum of -44dB and -51dB at 7.1GHz for 1-element and 2-element case respectively.

Design and validation of general biology learning program based on scientific inquiry skills

NASA Astrophysics Data System (ADS)

Cahyani, R.; Mardiana, D.; Noviantoro, N.

2018-03-01

Scientific inquiry is highly recommended to teach science. The reality in the schools and colleges is that many educators still have not implemented inquiry learning because of their lack of understanding. The study aims to1) analyze students’ difficulties in learning General Biology, 2) design General Biology learning program based on multimedia-assisted scientific inquiry learning, and 3) validate the proposed design. The method used was Research and Development. The subjects of the study were 27 pre-service students of general elementary school/Islamic elementary schools. The workflow of program design includes identifying learning difficulties of General Biology, designing course programs, and designing instruments and assessment rubrics. The program design is made for four lecture sessions. Validation of all learning tools were performed by expert judge. The results showed that: 1) there are some problems identified in General Biology lectures; 2) the designed products include learning programs, multimedia characteristics, worksheet characteristics, and, scientific attitudes; and 3) expert validation shows that all program designs are valid and can be used with minor revisions. The first section in your paper.

Diagnostic techniques for measurement of aerodynamic noise in free field and reverberant environment of wind tunnels

NASA Technical Reports Server (NTRS)

El-Sum, H. M. A.; Mawardi, O. K.

1973-01-01

Techniques for studying aerodynamic noise generating mechanisms without disturbing the flow in a free field, and in the reverberation environment of the ARC wind tunnel were investigated along with the design and testing of an acoustic antenna with an electronic steering control. The acoustic characteristics of turbojet as a noise source, detection of direct sound from a source in a reverberant background, optical diagnostic methods, and the design characteristics of a high directivity acoustic antenna. Recommendations for further studies are included.

Universal design characteristic on themed streets

NASA Astrophysics Data System (ADS)

Harsritanto, Bangun IR; Indriastjario; Wijayanti

2017-12-01

People around the world can access the streets to fulfil their daily activities regardless of their gender, age, and abilities. The streetscape is an urban public space which is built to facilitate the basic needs of people as social being. The themed street is an urban streetscape designed and built in detail with a theme or special purpose in an of urban development process. Universal design facilitates the full range of human diversity as physical appearance, perception, cognitive abilities, sizes, and shapes. By designing for the diversity, the specialized streets become more functional and user-friendly. The purpose of this study is to examine several design characteristics of themed streets in several countries from three different continents using universal design principles for giving proper directions to develop more user-friendly streets. Literature review and case study were used as research methods. The literature review was extracted and compiled from manuscripts, streetscape design books, and from universal design principles. Furthermore, the constructed theory were used to examine the case studies of themed streets. The findings indicated that themed streets’ character design were strongly influenced by local cultural aspect even though the basic guidelines were universal design principles; the resumed design direction can be suggested universal along with the richness of local aspects.

Snapshots of mathematics teacher noticing during task design

NASA Astrophysics Data System (ADS)

Choy, Ban Heng

2016-09-01

Designing a mathematically worthwhile task is critical for promoting students' reasoning. To improve task design skills, teachers often engage in collaborative lesson planning activities such as lesson study. However, to learn from the process of lesson study, it is important for teachers to notice productively the concepts, students' confusion and the design of the task. But what researchers mean by productive noticing varies. In this article, I present the FOCUS Framework which highlights two characteristics of productive noticing: having an explicit focus for noticing and focusing noticing through pedagogical reasoning. Using these two characteristics, I develop snapshots of noticing as a representation of practice to present a fine-grained analysis of teacher noticing. Through vignettes of teachers discussing the design of a task to teach fractions, I illustrate how two teachers' noticing can be analysed and represented using snapshots of noticing. To conclude, I highlight what snapshots of noticing tell us about a teacher's noticing and suggest ways to use these snapshots in future studies of noticing.

Study of Civil Markets for Heavy-Lift Airships

NASA Technical Reports Server (NTRS)

Mettam, P. J.; Hansen, D.; Chabot, C.; Byrne, R.

1978-01-01

The civil markets for heavy lift airships (HLAs) were defined by first identifying areas of most likely application. The operational suitability of HLAs for the applications identified were then assessed. The operating economics of HLAs were established and the market size for HLA services estimated by comparing HLA operating and economic characteristics with those of competing modes. The sensitivities of the market size to HLA characteristics were evaluated and the number and sizes of the vehicles required to service the more promising markets were defined. Important characteristics for future HLAs are discussed that were derived from the study of each application, including operational requirements, features enhancing profitability, military compatibility, improved design requirements, approach to entry into service, and institutional implications for design and operation.

Anthropometric and mass distribution characteristics of the adult female.

DOT National Transportation Integrated Search

1983-09-01

This study of 46 living adult females is part of a long-range research program designed to establish valid analytical relationships between readily measured body dimensions and mass distribution characteristics of living populations. Presented in thi...

Stereo Sound Field Controller Design Using Partial Model Matching on the Frequency Domain

NASA Astrophysics Data System (ADS)

Kumon, Makoto; Miike, Katsuhiro; Eguchi, Kazuki; Mizumoto, Ikuro; Iwai, Zenta

The objective of sound field control is to make the acoustic characteristics of a listening room close to those of the desired system. Conventional methods apply feedforward controllers, such as digital filters, to achieve this objective. However, feedback controllers are also necessary in order to attenuate noise or to compensate the uncertainty of the acoustic characteristics of the listening room. Since acoustic characteristics are well modeled on the frequency domain, it is efficient to design controllers with respect to frequency responses, but it is difficult to design a multi input multi output (MIMO) control system on a wide frequency domain. In the present study, a partial model matching method on the frequency domain was adopted because this method requires only sampled data, rather than complex mathematical models of the plant, in order to design controllers for MIMO systems. The partial model matching method was applied to design two-degree-of-freedom controllers for acoustic equalization and noise reduction. Experiments demonstrated effectiveness of the proposed method.

College Students' Goals, Plans, and Background Characteristics; A Synthesis of Three Empirical Studies.

ERIC Educational Resources Information Center

Fenske, Robert H.; Scott, Craig S.

This study was designed to provide longitudinal data bearing on the change and/or stability of college-bound students' educational and vocational goals, as well as their background characteristics. Data from three studies were contrasted and compared. Included in these studies were: (1) a 2-year followup of 4,009 junior college students; (2) a…

Open Vehicle Sketch Pad Aircraft Modeling Strategies

NASA Technical Reports Server (NTRS)

Hahn, Andrew S.

2013-01-01

Geometric modeling of aircraft during the Conceptual design phase is very different from that needed for the Preliminary or Detailed design phases. The Conceptual design phase is characterized by the rapid, multi-disciplinary analysis of many design variables by a small engineering team. The designer must walk a line between fidelity and productivity, picking tools and methods with the appropriate balance of characteristics to achieve the goals of the study, while staying within the available resources. Identifying geometric details that are important, and those that are not, is critical to making modeling and methodology choices. This is true for both the low-order analysis methods traditionally used in Conceptual design as well as the highest-order analyses available. This paper will highlight some of Conceptual design's characteristics that drive the designer s choices as well as modeling examples for several aircraft configurations using the open source version of the Vehicle Sketch Pad (Open VSP) aircraft Conceptual design geometry modeler.

Characteristics of Spanish articles of "scientific quality" cited in clinical practice guidelines on mental health.

PubMed

Permanyer-Miralda, Gaietà; Adam, Paula; Guillamón, Imma; Solans-Domènech, Maite; Pons, Joan M V

2013-01-01

The study aims to illustrate the impact of Spanish research in clinical decision making. To this end, we analysed the characteristics of the most significant Spanish publications cited in clinical practice guidelines (CPG) on mental health. We conducted a descriptive qualitative study on the characteristics of ten articles cited in Spanish CPG on mental health, and selected for their "scientific quality". We analysed the content of the articles on the basis of the following characteristics: topics, study design, research centres, scientific and practical relevance, type of funding, and area or influence of the reference to the content of the guidelines. Among the noteworthy studies, some basic science studies, which have examined the establishment of genetic associations in the pathogenesis of mental illness are included, and others on the effectiveness of educational interventions. The content of those latter had more influence on the GPC, because they were cited in the summary of the scientific evidence or in the recommendations. Some of the outstanding features in the selected articles are the sophisticated designs (experimental or analytical), and the number of study centres, especially in international collaborations. Debate or refutation of previous findings on controversial issues may have also contributed to the extensive citation of work. The inclusion of studies in the CPG is not a sufficient condition of "quality", but their description can be instructive for the design of future research or publications. Copyright © 2012 SEP y SEPB. Published by Elsevier Espana. All rights reserved.

A method of network topology optimization design considering application process characteristic

NASA Astrophysics Data System (ADS)

Wang, Chunlin; Huang, Ning; Bai, Yanan; Zhang, Shuo

2018-03-01

Communication networks are designed to meet the usage requirements of users for various network applications. The current studies of network topology optimization design mainly considered network traffic, which is the result of network application operation, but not a design element of communication networks. A network application is a procedure of the usage of services by users with some demanded performance requirements, and has obvious process characteristic. In this paper, we first propose a method to optimize the design of communication network topology considering the application process characteristic. Taking the minimum network delay as objective, and the cost of network design and network connective reliability as constraints, an optimization model of network topology design is formulated, and the optimal solution of network topology design is searched by Genetic Algorithm (GA). Furthermore, we investigate the influence of network topology parameter on network delay under the background of multiple process-oriented applications, which can guide the generation of initial population and then improve the efficiency of GA. Numerical simulations show the effectiveness and validity of our proposed method. Network topology optimization design considering applications can improve the reliability of applications, and provide guidance for network builders in the early stage of network design, which is of great significance in engineering practices.

Limitations of the method of characteristics when applied to axisymmetric hypersonic nozzle design

NASA Technical Reports Server (NTRS)

Edwards, Anne C.; Perkins, John N.; Benton, James R.

1990-01-01

A design study of axisymmetric hypersonic wind tunnel nozzles was initiated by NASA Langley Research Center with the objective of improving the flow quality of their ground test facilities. Nozzles for Mach 6 air, Mach 13.5 nitrogen, and Mach 17 nitrogen were designed using the Method of Characteristics/Boundary Layer (MOC/BL) approach and were analyzed with a Navier-Stokes solver. Results of the analysis agreed well with design for the Mach 6 case, but revealed oblique shock waves of increasing strength originating from near the inflection point of the Mach 13.5 and Mach 17 nozzles. The findings indicate that the MOC/BL design method has a fundamental limitation that occurs at some Mach number between 6 an 13.5. In order to define the limitation more exactly and attempt to discover the cause, a parametric study of hypersonic ideal air nozzles designed with the current MOC/BL method was done. Results of this study indicate that, while stagnations conditions have a moderate affect on the upper limit of the method, the method fails at Mach numbers above 8.0.

Research and design of logistical information system based on SOA

NASA Astrophysics Data System (ADS)

Zhang, Bo

2013-03-01

Through the study on the existing logistics information systems and SOA technology, based on the current situation of enterprise logistics management and business features, this paper puts forward a SOA-based logistics system design program. This program is made in the WCF framework, with the combination of SOA and the actual characteristics of logistics enterprises, is simple to realize, easy to operate, and has strong expansion characteristic, therefore has high practical value.

Application of the CSCM method to the design of wedge cavities. [Conservative Supra Characteristic Method

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Nystrom, G. A.; Bardina, J.; Lombard, C. K.

1987-01-01

This paper describes the application of the conservative supra characteristic method (CSCM) to predict the flow around two-dimensional slot injection cooled cavities in hypersonic flow. Seven different numerical solutions are presented that model three different experimental designs. The calculations manifest outer flow conditions including the effects of nozzle/lip geometry, angle of attack, nozzle inlet conditions, boundary and shear layer growth and turbulance on the surrounding flow. The calculations were performed for analysis prior to wind tunnel testing for sensitivity studies early in the design process. Qualitative and quantitative understanding of the flows for each of the cavity designs and design recommendations are provided. The present paper demonstrates the ability of numerical schemes, such as the CSCM method, to play a significant role in the design process.

Street Intersection Characteristics and Their Impacts on Perceived Bicycling Safety

DOT National Transportation Integrated Search

2018-01-01

Safety concern is one of the core issues that deter people from bicycling in the US. Earlier studies have explored the associations between intersection design characteristics and bicyclist safety perceptions. Research shows that there are significan...

Optimal Micro-Scale Secondary Flow Control for the Management of High Cycle Fatigue and Distortion in Compact Inlet Diffusers

NASA Technical Reports Server (NTRS)

Anderson, Bernhard H.; Keller, Dennis J.

2002-01-01

The purpose of this study on micro-scale secondary flow control (MSFC) is to study the aerodynamic behavior of micro-vane effectors through their factor (i.e., the design variable) interactions and to demonstrate how these statistical interactions, when brought together in an optimal manner, determine design robustness. The term micro-scale indicates the vane effectors are small in comparison to the local boundary layer height. Robustness in this situation means that it is possible to design fixed MSFC robust installation (i.e.. open loop) which operates well over the range of mission variables and is only marginally different from adaptive (i.e., closed loop) installation design, which would require a control system. The inherent robustness of MSFC micro-vane effector installation designs comes about because of their natural aerodynamic characteristics and the manner in which these characteristics are brought together in an optimal manner through a structured Response Surface Methodology design process.

Federal Funding of Higher Education Proposals: Relationship of Research/Sponsored Programs Office Characteristics to Success Rates.

ERIC Educational Resources Information Center

Bergen, Doris; And Others

Information is presented on a study designed to collect data on the characteristics of research/sponsored programs offices at state-assisted higher education institutions that participate in the Office of Federal Programs (OFP) of the American Association of State Colleges and Universities. Objectives were to describe the characteristics of the…

Surveying Colorado Band Directors' Opinions of Skills and Characteristics Important to Successful Music Teaching

ERIC Educational Resources Information Center

Miksza, Peter; Roeder, Matthew; Biggs, Dana

2010-01-01

This study was designed to (a) gather band directors' opinions of skills and characteristics important to teaching and (b) examine the relative effectiveness of electronic versus paper survey methods. Survey respondents ranked lists of music, teaching, and personal skills or characteristics in order of importance and answered open-ended items…

Deep and Surface Processing of Instructor's Feedback in an Online Course

ERIC Educational Resources Information Center

Huang, Kun; Ge, Xun; Law, Victor

2017-01-01

This study investigated the characteristics of deep and surface approaches to learning in online students' responses to instructor's qualitative feedback given to a multi-stage, ill-structured design project. Further, the study examined the relationships between approaches to learning and two learner characteristics: epistemic beliefs (EB) and…

Perceptions and Competence of Turkish Pre-Service Science Teachers with Regard to Entrepreneurship

ERIC Educational Resources Information Center

Deveci, Isa

2016-01-01

The aim of this study is both to determine the perceptions of pre-service science teachers towards the concepts of entrepreneurship and entrepreneurial characteristics and to investigate the perceptions of pre-service science teachers regarding transferring the entrepreneurial characteristics to students. This study is designed as a qualitative…

Measuring Family System Characteristics in Families Caring for Dementia Patients.

ERIC Educational Resources Information Center

Niederehe, George; And Others

This paper describes an ongoing study evaluating families that provide in-home care to elderly relatives wth dementia. Characteristics of the study, which include a focus on progressive senile dementia, use of a clinical approach, longitudinal design, descriptive nature, focus on the dyad of patient and primary caregiver, and use of videotaping…

Design study for a magnetically supported reaction wheel

NASA Technical Reports Server (NTRS)

Stocking, G.; Dendy, J.; Sabnis, A.

1974-01-01

Results are described of a study program in which the characteristics of a magnetically supported reaction wheel are defined. Tradeoff analyses are presented for the principal components, which are then combined in several reaction wheel design concepts. A preliminary layout of the preferred configuration is presented along with calculated design and performance parameters. Recommendations are made for a prototype development program.

A real-time spectrum acquisition system design based on quantum dots-quantum well detector

NASA Astrophysics Data System (ADS)

Zhang, S. H.; Guo, F. M.

2016-01-01

In this paper, we studied the structure characteristics of quantum dots-quantum well photodetector with response wavelength range from 400 nm to 1000 nm. It has the characteristics of high sensitivity, low dark current and the high conductance gain. According to the properties of the quantum dots-quantum well photodetectors, we designed a new type of capacitive transimpedence amplifier (CTIA) readout circuit structure with the advantages of adjustable gain, wide bandwidth and high driving ability. We have implemented the chip packaging between CTIA-CDS structure readout circuit and quantum dots detector and tested the readout response characteristics. According to the timing signals requirements of our readout circuit, we designed a real-time spectral data acquisition system based on FPGA and ARM. Parallel processing mode of programmable devices makes the system has high sensitivity and high transmission rate. In addition, we realized blind pixel compensation and smoothing filter algorithm processing to the real time spectrum data by using C++. Through the fluorescence spectrum measurement of carbon quantum dots and the signal acquisition system and computer software system to realize the collection of the spectrum signal processing and analysis, we verified the excellent characteristics of detector. It meets the design requirements of quantum dot spectrum acquisition system with the characteristics of short integration time, real-time and portability.

Time-Structured and Net Intraindividual Variability: Tools for Examining the Development of Dynamic Characteristics and Processes

PubMed Central

Ram, Nilam; Gerstorf, Denis

2009-01-01

The study of intraindividual variability is the study of fluctuations, oscillations, adaptations, and “noise” in behavioral outcomes that manifest on micro-time scales. This paper provides a descriptive frame for the combined study of intraindividual variability and aging/development. At the conceptual level, we highlight that the study of intraindividual variability provides access to dynamic characteristics – construct-level descriptions of individuals' capacities for change (e.g., lability), and dynamic processes – the systematic changes individuals' exhibit in response to endogenous and exogenous influences (e.g., regulation). At the methodological level, we review how quantifications of net intraindividual variability (e.g., iSD) and models of time-structured intraindividual variability (e.g., time-series) are being used to measure and describe dynamic characteristics and processes. At the research design level, we point to the benefits of measurement burst study designs, wherein data are obtained across multiple time scales, for the study of development. PMID:20025395

Study of techniques for redundancy verification without disrupting systems, phases 1-3

NASA Technical Reports Server (NTRS)

1970-01-01

The problem of verifying the operational integrity of redundant equipment and the impact of a requirement for verification on such equipment are considered. Redundant circuits are examined and the characteristics which determine adaptability to verification are identified. Mutually exclusive and exhaustive categories for verification approaches are established. The range of applicability of these techniques is defined in terms of signal characteristics and redundancy features. Verification approaches are discussed and a methodology for the design of redundancy verification is developed. A case study is presented which involves the design of a verification system for a hypothetical communications system. Design criteria for redundant equipment are presented. Recommendations for the development of technological areas pertinent to the goal of increased verification capabilities are given.

Rapid Response Risk Assessment in New Project Development

NASA Technical Reports Server (NTRS)

Graber, Robert R.

2010-01-01

A capability for rapidly performing quantitative risk assessments has been developed by JSC Safety and Mission Assurance for use on project design trade studies early in the project life cycle, i.e., concept development through preliminary design phases. A risk assessment tool set has been developed consisting of interactive and integrated software modules that allow a user/project designer to assess the impact of alternative design or programmatic options on the probability of mission success or other risk metrics. The risk and design trade space includes interactive options for selecting parameters and/or metrics for numerous design characteristics including component reliability characteristics, functional redundancy levels, item or system technology readiness levels, and mission event characteristics. This capability is intended for use on any project or system development with a defined mission, and an example project will used for demonstration and descriptive purposes, e.g., landing a robot on the moon. The effects of various alternative design considerations and their impact of these decisions on mission success (or failure) can be measured in real time on a personal computer. This capability provides a high degree of efficiency for quickly providing information in NASA s evolving risk-based decision environment

[Design of Complex Cavity Structure in Air Route System of Automated Peritoneal Dialysis Machine].

PubMed

Quan, Xiaoliang

2017-07-30

This paper introduced problems about Automated Peritoneal Dialysis machine(APD) that the lack of technical issues such as the structural design of the complex cavities. To study the flow characteristics of this special structure, the application of ANSYS CFX software is used with k-ε turbulence model as the theoretical basis of fluid mechanics. The numerical simulation of flow field simulation result in the internal model can be gotten after the complex structure model is imported into ANSYS CFX module. Then, it will present the distribution of complex cavities inside the flow field and the flow characteristics parameter, which will provide an important reference design for APD design.

Managing Training Materials with Structured Text Design.

ERIC Educational Resources Information Center

Streit, Les D.; And Others

1986-01-01

Describes characteristics of structured text design; benefits of its use in training; benefits for developers of training materials and steps in preparing training materials. A case study illustrating how the structured text design process solved the sales training needs of the Mercedes-Benz Truck Company is presented. (MBR)

Mechanistic-Empirical Pavement Design Guide Flexible Pavement Performance Prediction Models Volume II Reference Manual

DOT National Transportation Integrated Search

2007-08-01

The objective of this research study was to develop performance characteristics or variables (e.g., ride quality, rutting, : fatigue cracking, transverse cracking) of flexible pavements in Montana, and to use these characteristics in the : implementa...

Friendliness, functionality and freedom: Design characteristics that support midwifery practice in the hospital setting.

PubMed

Hammond, Athena; Homer, Caroline S E; Foureur, Maralyn

2017-07-01

to identify and describe the design characteristics of hospital birth rooms that support midwives and their practice. this study used a qualitative exploratory descriptive methodology underpinned by the theoretical approach of critical realism. Data was collected through 21 in-depth, face-to-face photo-elicitation interviews and a thematic analysis guided by study objectives and the aims of exploratory research was undertaken. the study was set at a recently renovated tertiary hospital in a large Australian city. participants were 16 registered midwives working in a tertiary hospital; seven in delivery suite and nine in birth centre settings. Experience as a midwife ranged from three to 39 years and the sample included midwives in diverse roles such as educator, student support and unit manager. three design characteristics were identified that supported midwifery practice. They were friendliness, functionality and freedom. Friendly rooms reduced stress and increased midwives' feelings of safety. Functional rooms enabled choice and provided options to better meet the needs of labouring women. And freedom allowed for flexible, spontaneous and responsive midwifery practice. hospital birth rooms that possess the characteristics of friendliness, functionality and freedom offer enhanced support for midwives and may therefore increase effective care provision. new and existing birth rooms can be designed or adapted to better support the wellbeing and effectiveness of midwives and may thereby enhance the quality of midwifery care delivered in the hospital. Quality midwifery care is associated with positive outcomes and experiences for labouring women. Further research is required to investigate the benefit that may be transmitted to women by implementing design intended to support and enhance midwifery practice. Copyright © 2017 Elsevier Ltd. All rights reserved.

Design criteria for median turn lanes.

DOT National Transportation Integrated Search

1978-03-01

This study was initiated with an extensive literature review and survey of : left-turn median lane practices in Texas cities. The initial phase identified : characteristics of urban arterial accidents, basic design elements, current use of : left-tur...

Effect of external jet-flow deflector geometry on OTW aero-acoustic characteristics

NASA Technical Reports Server (NTRS)

Vonglahn, U.; Groesbeck, D.

1976-01-01

The effect of geometry variations in the design of external deflectors for use with over-the-wing (OTW) configurations was studied at model scale and subsonic jet velocities. Included in the variations were deflector size and angle as well as wing size and flap setting. A conical nozzle (5.2-cm diameter) mounted at 0.1 chord above and downstream of the wing leading edges was used. The data indicate that external deflectors provide satisfactory takeoff and approach aerodynamic performance and acoustic characteristics for OTW configurations. These characteristics together with expected good cruise aerodynamics, since external deflectors are storable, may provide optimum OTW design configurations.

The relation between sexual interest and personality characteristics in men: an eye-tracking study.

PubMed

Tsujimura, A; Miyagawa, Y; Takada, S; Nagahara, A; Matsuoka, Y; Takao, T; Nakayama, J; Matsushita, M; Nonomura, N; Okuyama, A

2010-01-01

There is a large individual deviation for men, which may be caused by a difference in personality characteristics, in sexual interest in response to sexual stimuli. In this study, we investigate whether attention to the sexual region in a video depends on the personality characteristics of men, assessing this with an eye-tracking system. The study included 30 healthy males with a normal psychological state, who viewed a sexual video in which the sexual region had been designated. Visual attention was measured across the designated region according to gaze duration. Ten types of personality characteristics were evaluated as a T-score by a questionnaire. By Pearson's correlation coefficient, the relations between gaze duration at the sexual region and T-scores of paranoia, psychasthenia and social introversion were found to be statistically significant. By multivariate stepwise regression analysis, only social introversion was negatively associated with the sexual region. Even normal variation of personality characteristics can affect the viewing period of the sexual region. This is the first report showing that subjects with a high degree of paranoia, psychasthenia and particularly social introversion have a tendency to view the sexual region for a shorter duration.

A pragmatic randomized comparative effectiveness trial of transitional care for a socioeconomically diverse population: Design, rationale and baseline characteristics.

PubMed

Schaeffer, Christine; Teter, Caroline; Finch, Emily A; Hurt, Courtney; Keeter, Mary Kate; Liss, David T; Rogers, Angela; Sheth, Avani; Ackermann, Ronald

2018-02-01

Transitional care programs have been widely used to reduce readmissions and improve the quality and safety of the handoff process between hospital and outpatient providers. Very little is known about effective transitional care interventions among patients who are uninsured or with Medicaid. This paper describes the design and baseline characteristics of a pragmatic randomized comparative effectiveness trial of transitional care. Northwestern Medical Group- Transitional Care (NMG-TC) care model was developed to address the needs of patients with multiple medical problems that required lifestyle changes and were amenable to office-based management. We present the design, evaluation methods and baseline characteristics of NMG-TC trial patients. Baseline demographic characteristics indicate that our patient population is predominantly male, Medicaid insured and non-white. This study will evaluate two methods for implementing an effective transitional care model in a medically complex and socioeconomically diverse population. Copyright © 2017 Elsevier Inc. All rights reserved.

Age-Differential Effects of Job Characteristics on Job Attraction: A Policy-Capturing Study

PubMed Central

Zacher, Hannes; Dirkers, Bodil T.; Korek, Sabine; Hughes, Brenda

2017-01-01

Based on an integration of job design and lifespan developmental theories, Truxillo et al. (2012) proposed that job characteristics interact with employee age in predicting important work outcomes. Using an experimental policy-capturing design, we investigated age-differential effects of four core job characteristics (i.e., job autonomy, task variety, task significance, and feedback from the job) on job attraction (i.e., individuals' rating of job attractiveness). Eighty-two employees between 19 and 65 years (Mage = 41, SD = 14) indicated their job attraction for each of 40 hypothetical job descriptions in which the four job characteristics were systematically manipulated (in total, participants provided 3,280 ratings). Results of multilevel analyses showed that the positive effects of task variety, task significance, and feedback from the job were stronger for younger compared to older employees, whereas we did not find significant age-differential effects of job autonomy on job attraction. These findings are only partially consistent with propositions of Truxillo et al.'s (2012) lifespan perspective on job design. PMID:28713322

Age-Differential Effects of Job Characteristics on Job Attraction: A Policy-Capturing Study.

PubMed

Zacher, Hannes; Dirkers, Bodil T; Korek, Sabine; Hughes, Brenda

2017-01-01

Based on an integration of job design and lifespan developmental theories, Truxillo et al. (2012) proposed that job characteristics interact with employee age in predicting important work outcomes. Using an experimental policy-capturing design, we investigated age-differential effects of four core job characteristics (i.e., job autonomy, task variety, task significance, and feedback from the job) on job attraction (i.e., individuals' rating of job attractiveness). Eighty-two employees between 19 and 65 years ( M age = 41, SD = 14) indicated their job attraction for each of 40 hypothetical job descriptions in which the four job characteristics were systematically manipulated (in total, participants provided 3,280 ratings). Results of multilevel analyses showed that the positive effects of task variety, task significance, and feedback from the job were stronger for younger compared to older employees, whereas we did not find significant age-differential effects of job autonomy on job attraction. These findings are only partially consistent with propositions of Truxillo et al.'s (2012) lifespan perspective on job design.

Factors influencing confidential unit exclusions in blood donors.

PubMed

Sümnig, A; Konerding, U; Kohlmann, T; Greinacher, A

2010-04-01

In many countries blood donors can exclude their donated blood from being transfused in a confidential unit exclusion (CUE) process. We aimed to identify characteristics which might influence the decision for CUE. In a 3-step approach we first enrolled 29 German blood donation centers in 2005 and addressed how the clarity of different CUE forms applied in these centers was rated by first time blood donors and also assessed three newly designed CUE forms. Second, we performed a survey on the characteristics of the CUE process including 25 centers. Third, we performed an intervention study, in which the CUE form originally applied in the study centre was compared with a newly developed CUE form in a before-after study design with respect to the corresponding CUE rates. (1) Clarity of the CUE forms varied considerably. (2) The CUE rate was higher (P < 0.05) when nurses rather than a physician were involved in informing the donors and when the CUE form was submitted anonymously instead of being handed to a person. (3) Application of the newly designed CUE form which was rated as being very clear resulted in a 31% decrease in the CUE rate. Design of the CUE form and characteristics of the CUE process may considerably influence the CUE rates.

Optical elements design of optical pick-up with characteristics of read-out spot for high density optical storage

NASA Astrophysics Data System (ADS)

Li, Lihua; Ma, Jianshe; Liu, Lin; Pan, Longfa; Zhang, Jianyong; Lu, Junhui

2005-09-01

It is well known that the optical pick-up (OPU) plays a very important role in optical storage system. And the quality of OPU can be measured by the characteristics of OPU read-out spot for high density optical storage. Therefore this paper mainly designs an OPU model for high density optical storage to study the characteristics of OPU read-out spot. Firstly it analyses the optical read-out principle in OPU and contrives an optical read-out system based on the hereinbefore theory. In this step it chiefly designs the grating, splitter, collimator lens and objective lens. Secondly based on the aberrations analysis and theory involved by the splitter, the collimator lens and the optical lens, the paper uses the software CODE V to calculate the aberrations and to optimize the optical read-out system. Then the author can receive an ideal OPU read-out spot for high density optical storage and obtain the characteristics of the ideal OPU read-out spot. At the same time this paper analyses some influence factors which can directly affect the characteristics of the OPU read-out spot. Thirdly according to the up data the author practically manufactures a real optical pick-up to validate the hereinbefore designed optical read-out system. And it uses the Optical Spot Analyzer to get the image of the read-out spot. Comparing the ideal image to the actual image of the designed optical read-out system, the author finds out that the upwards analyses and design is suitable for high density storage and can be used in the actual production. And the author also receives the conclusion that the mostly influences on characteristics of OPU read-out spot for high density optical storage factors is not only the process of designing the grating, splitter, collimator lens and objective lens, but also the assembling work precision

Truck characteristics for use in highway design and operation. Volume II, Appendices

DOT National Transportation Integrated Search

1990-08-01

Highway geometric design and traffic operations are based in part on consideration of vehicle characteristics. However, many of the current highway design and operational criteria are based on passenger car characteristics, even though truck characte...

Facial characteristics in children with Down's syndrome and spectacle fitting.

PubMed

Woodhouse, J M; Hodge, S J; Earlam, R A

1994-01-01

Significant refractive error is very common among children with Down's syndrome so the requirement for spectacles for this group is high. The aim of this study was to measure the facial characteristics of children with Down's syndrome and to compare them with two previous studies which have aided the design of children's spectacle frames. The study was carried out in two schools in South Wales, measuring 20 children between the ages of 3.6 and 14.4 years. The results show that between the ages of 7 and 14 years, facial characteristics of children with Down's syndrome do not change with age and rarely coincide with those of other children, either of a similar age or younger. Thus children with Down's syndrome cannot be fitted satisfactorily with conventional children's frames, and it would be desirable for a specially designed range of frames to be made available.

Solar Collector Design Optimization: A Hands-on Project Case Study

ERIC Educational Resources Information Center

Birnie, Dunbar P., III; Kaz, David M.; Berman, Elena A.

2012-01-01

A solar power collector optimization design project has been developed for use in undergraduate classrooms and/or laboratories. The design optimization depends on understanding the current-voltage characteristics of the starting photovoltaic cells as well as how the cell's electrical response changes with increased light illumination. Students…

Design Research on Inquiry-Based Multivariable Calculus: Focusing on Students' Argumentation and Instructional Design

ERIC Educational Resources Information Center

Kwon, Oh Nam; Bae, Younggon; Oh, Kuk Hwan

2015-01-01

In this study, researchers design and implement an inquiry based multivariable calculus course in a university which aims at enhancing students' argumentation in rich mathematical discussions. This research aims to understand the characteristics of students' argumentation in activities involving proof constructions through mathematical…

Mechanistic-Empirical Pavement Design Guide Flexible Pavement Performance Prediction Models Volume I Executive Research Summary

DOT National Transportation Integrated Search

2007-08-01

The objective of this research study was to develop performance characteristics or variables (e.g., ride quality, rutting, : fatigue cracking, transverse cracking) of flexible pavements in Montana, and to use these characteristics in the : implementa...

An analytical study for the design of advanced rotor airfoils

NASA Technical Reports Server (NTRS)

Kemp, L. D.

1973-01-01

A theoretical study has been conducted to design and evaluate two airfoils for helicopter rotors. The best basic shape, designed with a transonic hodograph design method, was modified to meet subsonic criteria. One airfoil had an additional constraint for low pitching-moment at the transonic design point. Airfoil characteristics were predicted. Results of a comparative analysis of helicopter performance indicate that the new airfoils will produce reduced rotor power requirements compared to the NACA 0012. The hodograph design method, written in CDC Algol, is listed and described.

Preliminary design studies of an advanced general aviation aircraft

NASA Technical Reports Server (NTRS)

Barrett, Ron; Demoss, Shane; Dirkzwager, AB; Evans, Darryl; Gomer, Charles; Keiter, Jerry; Knipp, Darren; Seier, Glen; Smith, Steve; Wenninger, ED

1991-01-01

The preliminary design results are presented of the advanced aircraft design project. The goal was to take a revolutionary look into the design of a general aviation aircraft. Phase 1 of the project included the preliminary design of two configurations, a pusher, and a tractor. Phase 2 included the selection of only one configuration for further study. The pusher configuration was selected on the basis of performance characteristics, cabin noise, natural laminar flow, and system layouts. The design was then iterated to achieve higher levels of performance.

Heterogeneity in application, design, and analysis characteristics was found for controlled before-after and interrupted time series studies included in Cochrane reviews.

PubMed

Polus, Stephanie; Pieper, Dawid; Burns, Jacob; Fretheim, Atle; Ramsay, Craig; Higgins, Julian P T; Mathes, Tim; Pfadenhauer, Lisa M; Rehfuess, Eva A

2017-11-01

The aim of the study was to examine the application, design, and analysis characteristics of controlled before-after (CBA) and interrupted time series (ITS) studies and their use in Cochrane reviews. We searched the Cochrane library for reviews including these study designs from May 2012 to March 2015 and purposively selected, where available, two reviews each across 10 prespecified intervention types. We randomly selected two CBA and two ITS studies from each review. Two researchers independently extracted information from the studies and the respective reviews. Sixty-nine reviews considered CBA and ITS studies for inclusion. We analyzed 21 CBA and 16 ITS studies from 11 to 8 reviews, respectively. Cochrane reviews inconsistently defined and labeled CBA and ITS studies. Many studies did not meet the Cochrane definition or the minimum criteria provided by Cochrane Effective Practice and Organisation of Care. The studies present a heterogeneous set of study features and applied a large variety of analyses. While CBA and ITS studies represent important study designs to evaluate the effects of interventions, especially on a population or organizational level, unclear study design features challenge unequivocal classification and appropriate use. We discuss options for more specific definitions and explicit criteria for CBA and ITS studies. Copyright © 2017 Elsevier Inc. All rights reserved.

A Literature Review of Academic Library Web Page Studies

ERIC Educational Resources Information Center

Blummer, Barbara

2007-01-01

In the early 1990s, numerous academic libraries adopted the web as a communication tool with users. The literature on academic library websites includes research on both design and navigation. Early studies typically focused on design characteristics, since websites initially merely provided information on the services and collections available in…

Characterizing High School Chemistry Teachers' Use of Assessment Data via Latent Class Analysis

ERIC Educational Resources Information Center

Harshman, Jordan; Yezierski, Ellen

2016-01-01

In this study, which builds on a previous qualitative study and literature review, high school chemistry teachers' characteristics regarding the design of chemistry formative assessments and interpretation of results for instructional improvement are identified. The Adaptive Chemistry Assessment Survey for Teachers (ACAST) was designed to elicit…

A Time Series Design Study of Neurologically Impaired Children.

ERIC Educational Resources Information Center

St. John, Patricia

1992-01-01

Used time series design, Change-over-Time, study to determine usefulness of four tasks in distinguishing maturational factors and neurological characteristics of eight boys diagnosed as neurologically impaired. Results indicated that tasks were characterized by use of regular art materials, interest to subjects, ability to be replicated, and…

A Population-Based Study of Preschoolers' Food Neophobia and Its Associations with Food Preferences

ERIC Educational Resources Information Center

Russell, Catherine Georgina; Worsley, Anthony

2008-01-01

Objective: This cross-sectional study was designed to investigate the relationships between food preferences, food neophobia, and children's characteristics among a population-based sample of preschoolers. Design: A parent-report questionnaire. Setting: Child-care centers, kindergartens, playgroups, day nurseries, and swimming centers. Subjects:…

Towards a characterization of information automation systems on the flight deck

NASA Astrophysics Data System (ADS)

Dudley, Rachel Feddersen

This thesis summarizes research to investigate the characteristics that define information automation systems used on aircraft flight decks and the significant impacts that these characteristics have on pilot performance. Major accomplishments of the work include the development of a set of characteristics that describe information automation systems on the flight deck and an experiment designed to study a subset of these characteristics. Information automation systems on the flight deck are responsible for the collection, processing, analysis, and presentation of data to the flightcrew. These systems pose human factors issues and challenges that must be considered by designers of these systems. Based on a previously developed formal definition of information automation for aircraft flight deck systems, an analysis process was developed and conducted to reach a refined set of information automation characteristics. In this work, characteristics are defined as a set of properties or attributes that describe an information automation system's operation or behavior, which can be used to identify and assess potential human factors issues. Hypotheses were formed for a subset of the characteristics: Automation Visibility, Information Quality, and Display Complexity. An experimental investigation was developed to measure performance impacts related to these characteristics, which showed mixed results of expected and surprising findings, with many interactions. A set of recommendations were then developed based on the experimental observations. Ensuring that the right information is presented to pilots at the right time and in the appropriate manner is the job of flight deck system designers. This work provides a foundation for developing recommendations and guidelines specific to information automation on the flight deck with the goal of improving the design and evaluation of information automation systems before they are implemented.

Meta-analysis of digital game and study characteristics eliciting physiological stress responses.

PubMed

van der Vijgh, Benny; Beun, Robbert-Jan; Van Rood, Maarten; Werkhoven, Peter

2015-08-01

Digital games have been used as stressors in a range of disciplines for decades. Nonetheless, the underlying characteristics of these stressors and the study in which the stressor was applied are generally not recognized for their moderating effect on the measured physiological stress responses. We have therefore conducted a meta-analysis that analyzes the effects of characteristics of digital game stressors and study design on heart rate, systolic and diastolic blood pressure, in studies carried out from 1976 to 2012. In order to assess the differing quality between study designs, a new scale is developed and presented, coined reliability of effect size. The results show specific and consistent moderating functions of both game and study characteristics, on average accounting for around 43%, and in certain cases up to 57% of the variance found in physiological stress responses. Possible cognitive and physiological processes underlying these moderating functions are discussed, and a new model integrating these processes with the moderating functions is presented. These findings indicate that a digital game stressor does not act as a stressor by virtue of being a game, but rather derives its stressor function from its characteristics and the methodology in which it is used. This finding, together with the size of the associated moderations, indicates the need for a standardization of digital game stressors. © 2015 Society for Psychophysiological Research.

Study on optimal design of 210kW traction IPMSM considering thermal demagnetization characteristics

NASA Astrophysics Data System (ADS)

Kim, Young Hyun; Lee, Seong Soo; Cheon, Byung Chul; Lee, Jung Ho

2018-04-01

This study analyses the permanent magnet (PM) used in the rotor of an interior permanent magnet synchronous motor (IPMSM) used for driving an electric railway vehicle (ERV) in the context of controllable shape, temperature, and external magnetic field. The positioning of the inserted magnets is a degree of freedom in the design of such machines. This paper describes a preliminary analysis using parametric finite-element method performed with the aim of achieving an effective design. Next, features of the experimental design, based on methods such as the central-composition method, Box-Behnken and Taguchi method, are explored to optimise the shape of the high power density. The results are used to produce an optimal design for IPMSMs, with design errors minimized using Maxwell 2D, a commercial program. Furthermore, the demagnetization process is analysed based on the magnetization and demagnetization theory for PM materials in computer simulation. The result of the analysis can be used to calculate the magnetization and demagnetization phenomenon according to the input B-H curve. This paper presents the conditions for demagnetization by the external magnetic field in the driving and stopped states, and proposes a simulation method that can analyse demagnetization phenomena according to each condition and design the IPMSM that maximizes efficiency and torque characteristics. Finally, operational characteristics are analysed in terms of the operation patterns of railway vehicles, and control conditions are deduced to achieve maximum efficiency in all sections. This was experimentally verified.

The Influence of Student Demographics and Internal Characteristics on GPA, Persistence, and Academic Success of First-Time College Students

ERIC Educational Resources Information Center

Rodriguez, David B.

2013-01-01

Employing a non-experimental, ex-post facto design, the study examined the relationship of student demographic information and internal characteristics identified from the Learning and Study Strategies Inventory (LASSI) to student persistence, grade point average, and academic success. Cognitive Learning Theory (CLT), which focuses on the internal…

College Women Pursuing Careers in Science, Mathematics, and Engineering in the 1970s.

ERIC Educational Resources Information Center

McNamara, Patricia P.; Scherrei, Rita A.

The characteristics and persistence of young women who entered college during the 1970s and expressed an interest in science, math, and engineering (SME) are examined. The study design includes: (1) trend analysis of changes in characteristics of the science-oriented freshman pool from 1971-1979; (2) a longitudinal study of the educational and…

The Distinguishing Characteristics of High Schools with High and Low Enrollments in Physics.

ERIC Educational Resources Information Center

Van Koevering, Thomas E.

This paper presents the procedures, results, and conclusions of a study designed to determine if high schools with either high or low enrollments in physics exhibit any distinguishing characteristics that are measurable. The study involved 48 schools, 51 physics teachers, and 3767 students in the State of Michigan. Questionnaires were administered…

Relative Kerf and Sawing Variation Values for Some Hardwood Sawing Machines

Treesearch

Philip H. Steele; Michael W. Wade; Steven H. Bullard; Philip A. Araman

1992-01-01

Information on the conversion efficiency of sawing machines is important to those involved in the management, maintenance, and design of sawmills. Little information on the conversion characteristics of hardwood sawing machines has been available. This study, based on 266 studies of 6 machine types, provides an analysis of the machine characteristics of kerf width,...

An Introduction to Propensity Score Methods for Reducing the Effects of Confounding in Observational Studies

ERIC Educational Resources Information Center

Austin, Peter C.

2011-01-01

The propensity score is the probability of treatment assignment conditional on observed baseline characteristics. The propensity score allows one to design and analyze an observational (nonrandomized) study so that it mimics some of the particular characteristics of a randomized controlled trial. In particular, the propensity score is a balancing…

Desirable Characteristics of a Counseling Agency: Report on a Focus Group Research Study for the Center for Human Services.

ERIC Educational Resources Information Center

Sessions, Joan T.; Yanos, Janet Hagan

This study sought to identify characteristics of counselors and counseling services that are important in the selection of a counseling service. Subjects (N=28) were recruited through a newspaper advertisement and through mall intercepts. The screening criteria were designed to locate potential or previous counseling service consumers whose…

Flux harmonics in large SFR cores in relation with core characteristics such as power peaks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rimpault, G.; Buiron, L.; Fontaine, B.

2013-07-01

Designing future Sodium Fast Reactors (SFR) requires enhancing their operational performance and reducing the probability to go into core disruption. As a consequence of these constraints, these novel reactors exhibit rather unusual features compared to past designs. The cores are much larger with rather flat shape. The consequences of that shape on the core characteristics deserve to be studied. The approach taken in this paper is to calculate the eigenvalue associated to the first harmonic and its associated flux. It is demonstrated that these values are linked to some core features, in particular, those sensitive to spatial effects such asmore » power peaks induced by the movement of control rods. The uncertainty associated to these characteristics is being tentatively studied and guidelines for further studied are being identified. In the development strategy of these new SFR designs, a first demonstration plant of limited installed power (around 1500 MWth) will have to be built first. Identifying the possibility of going later to higher power plants (around 3600 MWth) without facing new challenges is an important criterion for designing such a plant. That strategy is being studied, in this paper, focusing on some rather frequent initiator such as the inadvertent control rod withdrawal for different core sizes with the help of the perturbation theory and the flux harmonics. (authors)« less

Designing Effective Natural Hazards Preparedness Communications: Factors that Influence Perceptions and Action

NASA Astrophysics Data System (ADS)

Wong-Parodi, G.; Fischhoff, B.

2012-12-01

Even though most people believe that natural hazards preparation is important for mitigating damage to their homes and basic survival in the aftermath of a disaster, few actually disaster-proof their homes, create plans, or obtain supplies recommended by agencies such as the Federal Emergency Management Agency. Several observational studies suggest that socio-demographic characteristics such as income and psychological characteristics such as self-efficacy affect whether or not an individual takes action to prepare for a natural hazard. These studies, however, only suggest that these characteristics may play a role. There has been little research that systematically investigates how these characteristics play a role in people's perceptions of recommended preparatory activities and decisions to perform them. Therefore, in Study 1, we explore people's perceptions of natural hazards preparedness measures on four dimensions: time, cost, helpfulness, and sense of preparedness. We further investigate if these responses vary by the socio-demographic and psychological characteristics of self-efficacy, knowledge, and income level. In Study 2, we experimentally test whether people's sense of self-efficacy, as it relates to natural hazards, can be manipulated through exposure to an "easy-and-effective" versus a "hard-and-effective" set of preparation measures. Our findings have implications for the design of natural hazards communication materials for the general public.

Thermally induced stresses and deformations in angle-ply composite tubes

NASA Technical Reports Server (NTRS)

Hyer, M. W.; Rousseau, Carl Q.

1987-01-01

Cure-induced uniform temperature change effects on the stresses, axial expansion, and thermally-induced twist of four specific angle-ply tube designs are discussed with a view to the tubes' use as major space structure components. The stresses and deformations in the tubes are studied as a function of the four designs, the off-axis angle, and the single-material and hybrid reinforcing-material construction used. It is found that tube design has a minor influence on the stresses, axial stiffness, and axial thermal expansion characteristics, which are more directly a function of off-axis angle and material selection; tube design is, however, the primary influence in the definition of thermally-induced twist and torsional stiffness characteristics. None of the designs is free of thermally induced twist.

A Phase I/II adaptive design for heterogeneous groups with application to a stereotactic body radiation therapy trial.

PubMed

Wages, Nolan A; Read, Paul W; Petroni, Gina R

2015-01-01

Dose-finding studies that aim to evaluate the safety of single agents are becoming less common, and advances in clinical research have complicated the paradigm of dose finding in oncology. A class of more complex problems, such as targeted agents, combination therapies and stratification of patients by clinical or genetic characteristics, has created the need to adapt early-phase trial design to the specific type of drug being investigated and the corresponding endpoints. In this article, we describe the implementation of an adaptive design based on a continual reassessment method for heterogeneous groups, modified to coincide with the objectives of a Phase I/II trial of stereotactic body radiation therapy in patients with painful osseous metastatic disease. Operating characteristics of the Institutional Review Board approved design are demonstrated under various possible true scenarios via simulation studies. Copyright © 2015 John Wiley & Sons, Ltd.

The influence of school furniture on students' performance and physical responses: results of a systematic review.

PubMed

Castellucci, H I; Arezes, P M; Molenbroek, J F M; de Bruin, R; Viviani, C

2017-01-01

The purpose of this study was to determine, using a systematic review, whether the design and/or dimensions of school furniture affect the students' physical responses and/or their performance. Of the review studies, 64% presented positive results, i.e. proven effects; 24% presented negative effects or no change/effect; and the remaining 12% showed an unclear effect. The compatibility between school furniture dimensions and students' anthropometric characteristics was identified as a key factor for improving some students' physical responses. Design characteristics such as high furniture, sit-stand furniture, and tilt tables and seats also present positive effects. Finally, we concluded that further research should be conducted exploring various aspects of those variables, particularly focusing on more objective measures complemented by controlled and prospective design. Practitioner Summary: A systematic review of the literature presents a clearly positive effect of school furniture dimensions on students' performance and physical responses. Similar results appeared when school furniture design was tested. However, studying the effects of design and dimensions together produced an unclear positive effect.

High-frequency output characteristics of AlGaAs/GaAs heterojunction bipolar transistors for large-signal applications

NASA Astrophysics Data System (ADS)

Chen, J.; Gao, G. B.; Ünlü, M. S.; Morkoç, H.

1991-11-01

High-frequency ic- vce output characteristics of bipolar transistors, derived from calculated device cutoff frequencies, are reported. The generation of high-frequency output characteristics from device design specifications represents a novel bridge between microwave circuit design and device design: the microwave performance of simulated device structures can be analyzed, or tailored transistor device structures can be designed to fit specific circuit applications. The details of our compact transistor model are presented, highlighting the high-current base-widening (Kirk) effect. The derivation of the output characteristics from the modeled cutoff frequencies are then presented, and the computed characteristics of an AlGaAs/GaAs heterojunction bipolar transistor operating at 10 GHz are analyzed. Applying the derived output characteristics to microwave circuit design, we examine large-signal class A and class B amplification.

Is the cigarette pack just a wrapper or a characteristic of the product itself? A qualitative study of adult smokers to inform U.S. regulations.

PubMed

Lee, Joseph G L; Averett, Paige E; Blanchflower, Tiffany; Gregory, Kyle R

2018-03-01

In the U.S., tobacco products are now regulated by the Food and Drug Administration (FDA). Litigation has quickly followed. One area of controversy is when a change to the design of the cigarette pack requires approval through FDA's rigorous premarket review process. In this paper, we examine how adult U.S. smokers view the connection between the design of cigarette packs and the characteristics of the cigarettes within. Data for this qualitative study came from six focus groups conducted in March 2017 with adult smokers. Two groups consisted of lesbian, gay, and bisexual (LGB) participants; two groups of participants with less than four years of college education; one group of LGB and straight identity; and, one group of the general population. All groups were selected for regional, gender, and racial/ethnic diversity. Participants (n = 33) represented all nine U.S. Census divisions. We conducted constant comparison qualitative analysis utilizing a grounded theory approach. Participants' views reflected a belief that pack design is clearly a reflection of the cigarettes within and that a change in the pack signaled a change in the cigarettes. However, some participants felt price was the salient characteristic of cigarettes and design mattered more for enticing young people to smoke. Changes in pack design signal changes to the product for smokers. Pack design and changes to pack design are seen as particularly relevant to new and young smokers. These findings provide support for regulations that require assessment of cigarette pack design changes for impacts on public health.

The Study of the Phase Characteristics of Bragg Cells for Acousto-Optic Signal Processing

DTIC Science & Technology

1998-01-01

contractor will determine the relationship of phase characteristics between TeO2 and GaAs cells with their constructive and technical parameters. Design a...Braggcell TeO2 with minimal phase distortions operating near 100 MHz. Experimentally investigate the phase characteristics for a Bragg cell on TeO2 ...follows: The contractor will determine the relationship of phase characteristics between TeO2 and GaAs cells with their constructive and technical

47 CFR 2.201 - Emission, modulation, and transmission characteristics.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., and transmission characteristics. The following system of designating emission, modulation, and transmission characteristics shall be employed. (a) Emissions are designated according to their classification... characteristics. 2.201 Section 2.201 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY...

47 CFR 2.201 - Emission, modulation, and transmission characteristics.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., and transmission characteristics. The following system of designating emission, modulation, and transmission characteristics shall be employed. (a) Emissions are designated according to their classification... characteristics. 2.201 Section 2.201 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY...

Through the Eyes of the User: Evaluating Neonatal Intensive Care Unit Design.

PubMed

Denham, Megan E; Bushehri, Yousef; Lim, Lisa

2018-01-01

This article presents a pilot study that employed a user-centered methodology for evaluating and quantifying neonatal intensive care unit (NICU) designs based on the needs of the primary users. The design of NICUs has begun to shift from open-bay to single-family rooms. Both designs present unique advantages and challenges that impact babies, families, and caregivers. One NICU design was analyzed using the functional scenario (FS) analysis method. For the FS, users' needs were determined through literature review, interviews with NICU providers and parents, and a review of published design guidelines. Quantitative metrics were developed for each FS, so that characteristics of the NICU design could be analyzed to determine how successful they were in meeting the users' needs. The results were graphically represented to visualize the success and considerations of the design. A total of 23 FSs and 61 spatial metrics were developed. FSs for babies focused on infection prevention, minimizing exposure to environmental stimuli, and supporting enriching care activities. FSs for family members focused on direct access to the baby, and privacy and adequate space for daily activities. FSs for providers and caregivers focused on infection prevention, care activities, care zones, and visibility. Using an FS approach highlights design characteristics in the NICU that need to be addressed during the design process to more successfully meet the needs of the different users. Additionally, using this approach can inform design professionals' decision-making by presenting them with the design characteristics that impact the needs of the user groups.

Control group design, contamination and drop-out in exercise oncology trials: a systematic review.

PubMed

Steins Bisschop, Charlotte N; Courneya, Kerry S; Velthuis, Miranda J; Monninkhof, Evelyn M; Jones, Lee W; Friedenreich, Christine; van der Wall, Elsken; Peeters, Petra H M; May, Anne M

2015-01-01

Important considerations for exercise trials in cancer patients are contamination and differential drop-out among the control group members that might jeopardize the internal validity. This systematic review provides an overview of different control groups design characteristics of exercise-oncology trials and explores the association with contamination and drop-out rates. Randomized controlled exercise-oncology trials from two Cochrane reviews were included. Additionally, a computer-aided search using Medline (Pubmed), Embase and CINAHL was conducted after completion date of the Cochrane reviews. Eligible studies were classified according to three control group design characteristics: the exercise instruction given to controls before start of the study (exercise allowed or not); and the intervention the control group was offered during (any (e.g., education sessions or telephone contacts) or none) or after (any (e.g., cross-over or exercise instruction) or none) the intervention period. Contamination (yes or no) and excess drop-out rates (i.e., drop-out rate of the control group minus the drop-out rate exercise group) were described according to the three design characteristics of the control group and according to the combinations of these three characteristics; so we additionally made subgroups based on combinations of type and timing of instructions received. 40 exercise-oncology trials were included based on pre-specified eligibility criteria. The lowest contamination (7.1% of studies) and low drop-out rates (excess drop-out rate -4.7±9.2) were found in control groups offered an intervention after the intervention period. When control groups were offered an intervention both during and after the intervention period, contamination (0%) and excess drop-out rates (-10.0±12.8%) were even lower. Control groups receiving an intervention during and after the study intervention period have lower contamination and drop-out rates. The present findings can be considered when designing future exercise-oncology trials.

A study on thermal characteristics analysis model of high frequency switching transformer

NASA Astrophysics Data System (ADS)

Yoo, Jin-Hyung; Jung, Tae-Uk

2015-05-01

Recently, interest has been shown in research on the module-integrated converter (MIC) in small-scale photovoltaic (PV) generation. In an MIC, the voltage boosting high frequency transformer should be designed to be compact in size and have high efficiency. In response to the need to satisfy these requirements, this paper presents a coupled electromagnetic analysis model of a transformer connected with a high frequency switching DC-DC converter circuit while considering thermal characteristics due to the copper and core losses. A design optimization procedure for high efficiency is also presented using this design analysis method, and it is verified by the experimental result.

Design study of superconducting magnets for a combustion magnetohydrodynamic (MHD) generator

NASA Technical Reports Server (NTRS)

Thome, R. J.; Ayers, J. W.

1977-01-01

Design trade off studies for 13 different superconducting magnet systems were carried out. Based on these results, preliminary design characteristics were prepared for several superconducting magnet systems suitable for use with a combustion driven MHD generator. Each magnet generates a field level of 8 T in a volume 1.524 m (60 in.) long with a cross section 0.254 m x 0.254 m (10 in. x 10 in.) at the inlet and 0.406 m x .406 m (16 in. x 16 in.) at the outlet. The first design involves a racetrack coil geometry intended for operation at 4.2 K; the second design uses a racetrack geometry at 2.0 K; and the third design utilizes a rectangular saddle geometry at 4.2 K. Each case was oriented differently in terms of MHD channel axis and main field direction relative to gravity in order to evaluate fabrication ease. All cases were designed such that the system could be disassembled to allow for alteration of field gradient in the MHD channel by changing the angle between coils. Preliminary design characteristics and assembly drawings were generated for each case.

Doubly blind: a systematic review of gender in randomised controlled trials

PubMed Central

Phillips, Susan P; Hamberg, Katarina

2016-01-01

Background Although observational data show social characteristics such as gender or socio-economic status to be strong predictors of health, their impact is seldom investigated in randomised controlled studies (RCTs). Objective & design Using a random sample of recent RCTs from high-impact journals, we examined how the most often recorded social characteristic, sex/gender, is considered in design, analysis, and interpretation. Of 712 RCTs published from September 2008 to 31 December 2013 in the Annals of Internal Medicine, British Medical Journal, Lancet, Canadian Medical Association Journal, or New England Journal of Medicine, we randomly selected 57 to analyse funding, methods, number of centres, documentation of social circumstances, inclusion/exclusion criteria, proportions of women/men, and reporting about sex/gender in analyses and discussion. Results Participants’ sex was recorded in most studies (52/57). Thirty-nine percent included men and women approximately equally. Overrepresentation of men in 43% of studies without explicit exclusions for women suggested interference in selection processes. The minority of studies that did analyse sex/gender differences (22%) did not discuss or reflect upon these, or dismissed significant findings. Two studies reinforced traditional beliefs about women's roles, finding no impact of breastfeeding on infant health but nevertheless reporting possible benefits. Questionable methods such as changing protocols mid-study, having undefined exclusion criteria, allowing local researchers to remove participants from studies, and suggesting possible benefit where none was found were evident, particularly in industry-funded research. Conclusions Social characteristics like sex/gender remain hidden from analyses and interpretation in RCTs, with loss of information and embedding of error all along the path from design to interpretation, and therefore, to uptake in clinical practice. Our results suggest that to broaden external validity, in particular, more refined trial designs and analyses that account for sex/gender and other social characteristics are needed. PMID:27087576

Designing online audiovisual heritage services: an empirical study of two comparable online video services

NASA Astrophysics Data System (ADS)

Ongena, G.; van de Wijngaert, L. A. L.; Huizer, E.

2013-03-01

The purpose of this study is to seek input for a new online audiovisual heritage service. In doing so, we assess comparable online video services to gain insights into the motivations and perceptual innovation characteristics of the video services. The research is based on data from a Dutch survey held among 1,939 online video service users. The results show that online video service held overlapping antecedents but does show differences in motivations and in perceived innovation characteristics. Hence, in general, one can state that in comparison, online video services comply with different needs and have differences in perceived innovation characteristics. This implies that one can design online video services for different needs. In addition to scientific implications, the outcomes also provide guidance for practitioners in implementing new online video services.

Wall finish selection in hospital design: a survey of facility managers.

PubMed

Lavy, Sarel; Dixit, Manish K

2012-01-01

This paper seeks to analyze healthcare facility managers' perceptions regarding the materials used for interior wall finishes and the criteria used to select them. It also examines differences in wall finish materials and the selection process in three major hospital spaces: emergency, surgery, and in-patient units. These findings are compared with healthcare designers' perceptions on similar issues, as currently documented in the literature. Hospital design and the materials used for hospital construction have a considerable effect on the environment and health of patients. A 2002 survey revealed which characteristics healthcare facility designers consider when selecting materials for healthcare facilities; however, no similar study has examined the views of facility managers on building finish selection. A 22-question survey questionnaire was distributed to 210 facility managers of metropolitan, for-profit hospitals in Texas; IRB approval was obtained. Respondents were asked to rank 10 interior wall finish materials and 11 selection criteria for wall finishes. Data from 48 complete questionnaires were analyzed using descriptive statistics and nonparametric statistical analysis methods. The study found no statistically significant differences in terms of wall finish materials or the characteristics for material selection in the three major spaces studied. It identified facility managers' four most-preferred wall finish materials and the five-most preferred characteristics, with a statistical confidence level of greater than 95%. The paper underscores the importance of incorporating all perspectives: facility designers and facility managers should work together toward achieving common organizational goals.

Design study for a liquid metal slip ring solar array orientation mechanism

NASA Technical Reports Server (NTRS)

Clark, R. B.

1972-01-01

The design of a single axis orientation mechanism for solar arrays on high power synchronous satellites is studied primarily with respect to providing 116 liquid metal slip rings for reduced friction and improved electrical characteristics. Designs and tradeoff studies for the slip rings and other components are presented. An assembly containing 33 slip rings of three design approaches was designed, fabricated, and vacuum tested to 30 amperes and 30,000 volts. Containment of the liquid metal gallium in large diameter slip rings was difficult. A design approach is presented which is expected to provide improved retention of the liquid metal.

Effects of User and System Characteristics on Perceived Usefulness and Perceived Ease of Use of the Web-Based Classroom Response System

ERIC Educational Resources Information Center

Ke, Chih-Horng; Sun, Huey-Min; Yang, Yuan-Chi; Sun, Huey-Min

2012-01-01

This study explores the effect of user and system characteristics on our proposed web-based classroom response system (CRS) by a longitudinal design. The results of research are expected to understand the important factors of user and system characteristics in the web-based CRS. The proposed system can supply interactive teaching contents,…

Suicidal behaviour on subway systems: a review of the epidemiology.

PubMed

Ratnayake, Ruwan; Links, Paul S; Eynan, Rahel

2007-11-01

Suicide on subway systems is a public health challenge that has been reported in urban centers worldwide. Our objective was to analyze studies of suicide on subway systems, develop a profile of characteristics that are suggestive of association with suicides or attempts, and show how this profile can inform prevention. A literature review involving epidemiology studies and studies relating to subway suicide was conducted. Twenty-eight studies were included in this review. Across studies, characteristics were not often assessed for risk factor status, although several characteristics were remarkably similar. Those attempting suicide on the subway appear to be affected by serious mental illness and have contact with mental health services before the suicidal behavior. Several characteristics may be shared among this population, emphasizing the potential for prevention in clinical and public health domains. Well-designed studies that utilize robust data collection and statistical methods are needed to establish the risk status associated with these characteristics.

Regression modeling and prediction of road sweeping brush load characteristics from finite element analysis and experimental results.

PubMed

Wang, Chong; Sun, Qun; Wahab, Magd Abdel; Zhang, Xingyu; Xu, Limin

2015-09-01

Rotary cup brushes mounted on each side of a road sweeper undertake heavy debris removal tasks but the characteristics have not been well known until recently. A Finite Element (FE) model that can analyze brush deformation and predict brush characteristics have been developed to investigate the sweeping efficiency and to assist the controller design. However, the FE model requires large amount of CPU time to simulate each brush design and operating scenario, which may affect its applications in a real-time system. This study develops a mathematical regression model to summarize the FE modeled results. The complex brush load characteristic curves were statistically analyzed to quantify the effects of cross-section, length, mounting angle, displacement and rotational speed etc. The data were then fitted by a multiple variable regression model using the maximum likelihood method. The fitted results showed good agreement with the FE analysis results and experimental results, suggesting that the mathematical regression model may be directly used in a real-time system to predict characteristics of different brushes under varying operating conditions. The methodology may also be used in the design and optimization of rotary brush tools. Copyright © 2015 Elsevier Ltd. All rights reserved.

Precision of Curriculum-Based Measurement Reading Data: Considerations for Multiple-Baseline Designs

ERIC Educational Resources Information Center

Klingbeil, David A.; Van Norman, Ethan R.; Nelson, Peter M.

2017-01-01

Single-case designs provide an established technology for evaluating the effects of academic interventions. Researchers interested in studying the long-term effects of reading interventions often use curriculum-based measures of reading (CBM-R) as they possess many of the desirable characteristics for use in a time-series design. The reliability…

Designing Instruction for Speed: Qualitative Insights into Instructional Design for Accelerated Online Graduate Coursework

ERIC Educational Resources Information Center

Trekles, Anastasia M.; Sims, Roderick

2013-01-01

The purpose of this exploratory case study was to explore instructional design strategies and characteristics of online, asynchronous accelerated courses and students' choices of deep or surface learning approaches within this environment. An increasing number of university programs, particularly at the graduate level, are moving to an…

The role of behavioral economic incentive design and demographic characteristics in financial incentive-based approaches to changing health behaviors: a meta-analysis.

PubMed

Haff, Nancy; Patel, Mitesh S; Lim, Raymond; Zhu, Jingsan; Troxel, Andrea B; Asch, David A; Volpp, Kevin G

2015-01-01

To evaluate the use of behavioral economics to design financial incentives to promote health behavior change and to explore associations with demographic characteristics. Studies performed by the Center for Health Incentives and Behavioral Economics at the University of Pennsylvania published between January 2006 and March 2014. Randomized, controlled trials with available participant-level data. Studies that did not use financial incentives to promote health behavior change were excluded. Participant-level data from seven studies were pooled. Meta-analysis on the pooled sample using a random-effects model with interaction terms to examine treatment effects and whether they varied by incentive structure or demographic characteristics. The pooled study sample comprised 1403 participants, of whom 35% were female, 70% were white, 24% were black, and the mean age was 48 years (standard deviation 11.2 years). In the fully adjusted model, participants offered financial incentives had higher odds of behavior change (odds ratio [OR]: 3.96; p < .01) when compared to control. There were no significant interactions between financial incentives and gender, age, race, income, or education. When further adjusting for incentive structure, blacks had higher odds than whites of achieving behavior change (OR: 1.67; p < .05) with a conditional payment. Compared to lower-income participants, higher-income participants had lower odds of behavior change (OR: 0.46; p = .01) with a regret lottery. Financial incentives designed using concepts from behavioral economics were effective for promoting health behavior change. There were no large and consistent relationships between the effectiveness of financial incentives and observable demographic characteristics. Second-order examinations of incentive structure suggest potential relationships among the effectiveness of financial incentives, incentive structure, and the demographic characteristics of race and income.

Study of a Nongraded Supplementary Group Communication Skills Program: Rationale, Pupil Personal-Social Characteristics, and Program Effects.

ERIC Educational Resources Information Center

Stumpe, Doris M.

The purposes of this study were to design an experimental communications skills improvement program for low-achieving middle-grade pupils, to investigate certain assumed pupil personal-social characteristics on which the program was based, and to assess the effectiveness of the program. Two basic features incorporated into the new program were (1)…

The Impact of Personal and Program Characteristics on the Placement of School Leadership Preparation Program Graduates in School Leader Positions

ERIC Educational Resources Information Center

Fuller, Edward J.; Hollingworth, Liz; An, Brian P.

2016-01-01

Purpose: The purpose of this study is to examine the impact of personal and program characteristics on the placement of graduates of principal preparation programs in assistant principal, principal, and school leadership positions. Research Design: This study relies on Texas principal production data from 1993 through 2007 matched to employment…

Exploring the Characteristics and Diverse Sources of Students' Mental Models of Acids and Bases

ERIC Educational Resources Information Center

Lin, Jing-Wen; Chiu, Mei-Hung

2007-01-01

This study was part of a 6-year integrated project designed to build a databank of students' science conceptions in Taiwan. The main purpose of this study was to identify the characteristics of students' mental models regarding acids/bases, understand their changes in mental models, and explore sources that might influence students in constructing…

Results of Laboratory Tests of the Filtration Characteristics of Clay-Cement Concrete

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sol’skii, S. V., E-mail: solskiysv@vniig.ru; Lopatina, M. G., E-mail: LoptainaMG@vniig.ru; Legina, E. E.

Laboratory studies of the filtration characteristics of clay-cement concrete materials for constructing filtering diaphragms of earth dams by the method of secant piles are reported. Areas for further study aimed at improving the quality of construction, increasing operational safety, and developing a standards base for the design, construction, and operation of these systems are discussed.

Characteristics of Competitive Pressure Created by Charter Schools: Charter Schools, Their Impact on Traditional Public Districts and the Role of District Leadership

ERIC Educational Resources Information Center

Cummins, Cathy

2014-01-01

This mixed methods sequential explanatory designed study applied the economic theory of marketplace competition as a way to frame superintendents' perceptions of the characteristics of students and parents seeking charter schools. Although studies on charter schools are abundant, there is limited literature on this particular aspect of market…

The Effectiveness of Social Stories[TM] to Develop Social Interactions with Adults with Characteristics of Autism Spectrum Disorder

ERIC Educational Resources Information Center

Samuels, Rachel; Stansfield, Jois

2012-01-01

Most research into the effectiveness of Social Stories has focused on children with Autism Spectrum Disorders (ASD). This study examines the use of Social Stories with four adults with learning disabilities and social communication impairments characteristic of ASD. This study employed an N = 1 multiple-baseline, across-participant, AB design with…

The Design of Adult Acute Care Units in U.S. Hospitals

PubMed Central

Catrambone, Cathy; Johnson, Mary E.; Mion, Lorraine C.; Minnick, Ann F.

2010-01-01

Purpose To describe the current state of design characteristics determined to be desirable by the Agency for Health Research and Quality (AHRQ) in U.S. adult medical, surgical, and intensive care units (ICUs). Design Descriptive study of patient visibility; distance to hygiene, toileting, charting, and supplies; unit configuration; percentage of private rooms; and presence or absence of carpeting in 56 ICUs and 81 medical-surgical units in six metropolitan areas. Methods Data were collected via observation, measurement, and interviews. Unit configurations were classified via an iterative process. Descriptive data were analyzed according to ICU and non-ICU status using SPSS (Version 15). Findings Analysis of unit configurations indicated eight unit designs. Statistical analysis showed inter- and intrahospital variation in unit configurations, percentage private rooms, carpeting, visibility, and distance to supplies and charting. Few units met the AHRQ designated design elements studied. Conclusions A wide gap exists between desirable characteristics in ICUs and medical-surgical units. Future research is needed to explore operationalization of unit design elements as risk adjustments, how design elements contribute to patient outcomes, and how design elements influence one another. Clinical Relevance There is room for improvement on almost every design variable, particularly on medical-surgical units. Future planning should take into consideration the interaction of bed capacity and unit configuration. PMID:19335681

Using Faculty Characteristics to Predict Attitudes toward Developmental Education

ERIC Educational Resources Information Center

Sides, Meredith Louise Carr

2017-01-01

The study adapted Astin's I-E-O model and utilized multiple regression analyses to predict faculty attitudes toward developmental education. The study utilized a cross-sectional survey design to survey faculty members at 27 different higher education institutions in the state of Alabama. The survey instrument was a self-designed questionnaire that…

Space transportation booster engine configuration study. Addendum: Design definition document

NASA Technical Reports Server (NTRS)

1989-01-01

Gas generator engine characteristics and results of engine configuration refinements are discussed. Updated component mechanical design, performance, and manufacturing information is provided. The results are also provided of ocean recovery studies and various engine integration tasks. The details are provided of the maintenance plan for the Space Transportation Booster Engine.

Designing and Evaluating a Professional Development Programme for Basic Technology Integration in English as a Foreign Language (EFL) Classrooms

ERIC Educational Resources Information Center

Ansyari, Muhammad Fauzan

2015-01-01

This study aims to develop and evaluate a professional development programme for technology integration in an Indonesian university's English language teaching setting. The study explored the characteristics of this programme to English lecturers' technological pedagogical content knowledge (TPCK) development. This design-based research employed…

The Saskatchewan-Alberta large acceptance detector for photonuclear physics

NASA Astrophysics Data System (ADS)

Cairns, E. B.; Cameron, J.; Choi, W. C.; Fielding, H. W.; Green, P. W.; Greeniaus, L. G.; Hackett, E. D.; Holm, L.; Kolb, N. R.; Korkmaz, E.; Langill, P. P.; McDonald, W. J.; Mack, D.; Olsen, W. C.; Peterson, B. A.; Rodning, N. L.; Soukup, J.; Zhu, J.; Hutcheon, D.; Caplan, H. S.; Pywell, R. E.; Skopik, D. M.; Vogt, J. M.; van Heerden, I. J.

1992-09-01

The Saskatchewan-Alberta Large Acceptance Detector (SALAD) is a 4 π detector designed and built for studies of photonuclear reactions with a tagged photon beam. The design and performance of the detector are described. Its characteristics have been studied by examining p-p elastic scattering with a proton beam at TRIUMF.

Study of multiple asteroid flyby missions

NASA Technical Reports Server (NTRS)

1972-01-01

The feasibility, scientific objectives, mission profile characteristics, and implementation of an asteroid belt exploration mission by a spacecraft guided to intercept three or more asteroids at close range are discussed. A principal consideration in planning a multiasteroid mission is to cut cost by adapting an available and flight-proven spacecraft design such as Pioneer F and G, augmenting its propulsion and guidance capabilities and revising the scientific payload complement in accordance with required mission characteristics. Spacecraft modification necessary to meet the objectives and requirements of the mission were studied. A ground rule of the study was to hold design changes to a minimum and to utilize available technology as much as possible. However, with mission dates not projected before the end of this decade, a reasonable technology growth in payload instrument design and some subsystem components is anticipated that can be incorporated in the spacecraft adaptation.

Growing Effective CLD Teachers for Today's Classrooms of CLD Children

ERIC Educational Resources Information Center

Lohfink, Gayla; Morales, Amanda; Shroyer, Gail; Yahnke, Sally

2012-01-01

Using a case study design, this investigation examined the effective teaching characteristics of nontraditional, culturally and linguistically diverse (CLD) student teachers placed in rural, elementary schools with high populations of Latino/a students. Data collected reflected high percentages of effective teaching characteristics in multiple…

Characteristics of Effective Leadership Networks

ERIC Educational Resources Information Center

Leithwood, Kenneth; Azah, Vera Ndifor

2016-01-01

Purpose: The purpose of this paper is to inquire about the characteristics of effective school leadership networks and the contribution of such networks to the development of individual leaders' professional capacities. Design/methodology/approach: The study used path-analytic techniques with survey data provided by 450 school and district leaders…

Empowering Teachers: Characteristics, Strategies, and Practices of Successful Principals

ERIC Educational Resources Information Center

Ellis, Cailin Patrice

2012-01-01

This study implemented an exploratory mixed-methods design to better understand how the characteristics of a principal, specifically the strategies, behaviors, and actions, lead to the perception of empowerment as perceived by the teachers themselves. An expert panel identified three "highly successful" principals assigned to elementary…

Investigating Rural Teachers' Professional Development, Instructional Knowledge, and Classroom Practice

ERIC Educational Resources Information Center

Glover, Todd A.; Nugent, Gwen C.; Chumney, Frances L.; Ihlo, Tanya; Shapiro, Edward S.; Guard, Kirra; Koziol, Natalie; Bovaird, Jim

2016-01-01

Teachers Speak was a national survey study designed to investigate the characteristics of rural elementary school teachers' existing professional development; differences in professional development practices between rural and non-rural settings; and the potential influence of professional development characteristics on rural teachers' knowledge,…

Biomarker-Guided Adaptive Trial Designs in Phase II and Phase III: A Methodological Review

PubMed Central

Antoniou, Miranta; Jorgensen, Andrea L; Kolamunnage-Dona, Ruwanthi

2016-01-01

Background Personalized medicine is a growing area of research which aims to tailor the treatment given to a patient according to one or more personal characteristics. These characteristics can be demographic such as age or gender, or biological such as a genetic or other biomarker. Prior to utilizing a patient’s biomarker information in clinical practice, robust testing in terms of analytical validity, clinical validity and clinical utility is necessary. A number of clinical trial designs have been proposed for testing a biomarker’s clinical utility, including Phase II and Phase III clinical trials which aim to test the effectiveness of a biomarker-guided approach to treatment; these designs can be broadly classified into adaptive and non-adaptive. While adaptive designs allow planned modifications based on accumulating information during a trial, non-adaptive designs are typically simpler but less flexible. Methods and Findings We have undertaken a comprehensive review of biomarker-guided adaptive trial designs proposed in the past decade. We have identified eight distinct biomarker-guided adaptive designs and nine variations from 107 studies. Substantial variability has been observed in terms of how trial designs are described and particularly in the terminology used by different authors. We have graphically displayed the current biomarker-guided adaptive trial designs and summarised the characteristics of each design. Conclusions Our in-depth overview provides future researchers with clarity in definition, methodology and terminology for biomarker-guided adaptive trial designs. PMID:26910238

Urban Principle of Water Sensitive Design in Kampung Kamboja at Pontianak City

NASA Astrophysics Data System (ADS)

Hasriyanti, N.; Ryanti, E.

2017-07-01

This study will define the design principles of settlement area banks of the Kapuas Pontianak to approach the concept of water sensitive urban design (WSUD) in densely populated residential areas. Using a case study of a region densely located on the banks of the river with engineering literature to formulate the aspects taken into consideration and the components are arranged in the design, analysis descriptive paradigm rationalistic to identify the characteristics of residential areas riverbank with consideration of elements WSUD and formulate design principles residential area that is sensitive to water. This research is important to do because of problems related to the water management system in the settlement bank of the river in the city of Pontianak do not maximize. So that the primacy of this study contains several objectives to be achieved is to identify the characteristics of the settlement area riverbanks under consideration aspects areas design that is sensitive to water and principle areas design that will formulate the structure of the existing problems related to the needs of the community infrastructure facilities infrastructure neighborhoods and formulate and create guidelines for appropriate technology for integrated water management systems in the residential area of the riverbank and engineering design for the settlements are sensitive to water (WSUD). The final aim of the study is expected to achieve water management systems in residential areas by utilizing the abundant rainwater availability by using LID (Low Impact Development) through the concept of urban design that sensitive water

Design definition study of a lift/cruise fan technology V/STOL airplane: Summary

NASA Technical Reports Server (NTRS)

Zabinsky, J. M.; Higgins, H. C.

1975-01-01

A two-engine three-fan V/STOL airplane was designed to fulfill naval operational requirements. A multimission airplane was developed from study of specific point designs. Based on the multimission concept, airplanes were designed to demonstrate and develop the technology and operational procedures for this class of aircraft. Use of interconnected variable pitch fans led to a good balance between high thrust with responsive control and efficient thrust at cruise speeds. The airplanes and their characteristics are presented.

Results from conceptual design study of potential early commercial MHD/steam power plants

NASA Technical Reports Server (NTRS)

Hals, F.; Kessler, R.; Swallom, D.; Westra, L.; Zar, J.; Morgan, W.; Bozzuto, C.

1981-01-01

This paper presents conceptual design information for a potential early MHD power plant developed in the second phase of a joint study of such plants. Conceptual designs of plant components and equipment with performance, operational characteristics and costs are reported on. Plant economics and overall performance including full and part load operation are reviewed. Environmental aspects and the methods incorporated in plant design for emission control of sulfur and nitrogen oxides are reviewed. Results from reliability/availability analysis conducted are also included.

Program Aids Design Of Fluid-Circulating Systems

NASA Technical Reports Server (NTRS)

Bacskay, Allen; Dalee, Robert

1992-01-01

Computer Aided Systems Engineering and Analysis (CASE/A) program is interactive software tool for trade study and analysis, designed to increase productivity during all phases of systems engineering. Graphics-based command-driven software package provides user-friendly computing environment in which engineer analyzes performance and interface characteristics of ECLS/ATC system. Useful during all phases of spacecraft-design program, from initial conceptual design trade studies to actual flight, including pre-flight prediction and in-flight analysis of anomalies. Written in FORTRAN 77.

Advanced supersonic technology concept study: Hydrogen fueled configuration

NASA Technical Reports Server (NTRS)

Brewer, G. D.

1974-01-01

Conceptual designs of hydrogen fueled supersonic transport configurations for the 1990 time period were developed and compared with equivalent technology Jet A-1 fueled vehicles to determine the economic and performance potential of liquid hydrogen as an alternate fuel. Parametric evaluations of supersonic cruise vehicles with varying design and transport mission characteristics established the basis for selecting a preferred configuration which was then studied in greater detail. An assessment was made of the general viability of the selected concept including an evaluation of costs and environmental considerations, i.e., exhaust emissions and sonic boom characteristics. Technology development requirements and suggested implementation schedules are presented.

Development of a superconductor magnetic suspension and balance prototype facility for studying the feasibility of applying this technique to large scale aerodynamic testing

NASA Technical Reports Server (NTRS)

Zapata, R. N.; Humphris, R. R.; Henderson, K. C.

1975-01-01

The basic research and development work towards proving the feasibility of operating an all-superconductor magnetic suspension and balance device for aerodynamic testing is presented. The feasibility of applying a quasi-six-degree-of freedom free support technique to dynamic stability research was studied along with the design concepts and parameters for applying magnetic suspension techniques to large-scale aerodynamic facilities. A prototype aerodynamic test facility was implemented. Relevant aspects of the development of the prototype facility are described in three sections: (1) design characteristics; (2) operational characteristics; and (3) scaling to larger facilities.

Composite components under impact load and effects of defects on the loading capacity. [Alpha Jet tail assembly

NASA Technical Reports Server (NTRS)

Aoki, R.; Wurzel, D.

1979-01-01

Investigations were carried out on a horizontal tail assembly made of carbon fiber reinforced plastic for the Alpha Jet. The possibility of obtaining a leading edge nose design lighter but not more expensive than a metal version was studied. An important consideration was sufficient resistance of the leading edge against impact of stones and hailstones combined with high degree of stiffness. The improvement of energy reception characteristics of the materials through suitable laminate design was considered. Since certain defects occur in structural components, the effects of such defects on the characteristics of the parts were also studied.

Preliminary noise tradeoff study of a Mach 2.7 cruise aircraft

NASA Technical Reports Server (NTRS)

Mascitti, V. R.; Maglieri, D. J. (Editor); Raney, J. P. (Editor)

1979-01-01

NASA computer codes in the areas of preliminary sizing and enroute performance, takeoff and landing performance, aircraft noise prediction, and economics were used in a preliminary noise tradeoff study for a Mach 2.7 design supersonic cruise concept. Aerodynamic configuration data were based on wind-tunnel model tests and related analyses. Aircraft structural characteristics and weight were based on advanced structural design methodologies, assuming conventional titanium technology. The most advanced noise prediction techniques available were used, and aircraft operating costs were estimated using accepted industry methods. The 4-engines cycles included in the study were based on assumed 1985 technology levels. Propulsion data was provided by aircraft manufacturers. Additional empirical data is needed to define both noise reduction features and other operating characteristics of all engine cycles under study. Data on VCE design parameters, coannular nozzle inverted flow noise reduction and advanced mechanical suppressors are urgently needed to reduce the present uncertainties in studies of this type.

Selected Factors Related to Selective Service Rejection and Rejection Rate in Delaware (1967): A Study of the Characteristics of Young Men Failing to Meet Mental Qualifications for Military Service.

ERIC Educational Resources Information Center

Price, Jay R.

This study sought information about selective service rejection in Delaware, specifically rejectee characteristics, reasons for rejection, and the high rejection rate in Delaware. The basic design was a modified case study method in which a sample of individual records were examined. Differences between this sample and national samples were tested…

Design optimization of superconducting coils based on asymmetrical characteristics of REBCO tapes

NASA Astrophysics Data System (ADS)

Hong, Zhiyong; Li, Wenrong; Chen, Yanjun; Gömöry, Fedor; Frolek, Lubomír; Zhang, Min; Sheng, Jie

2018-07-01

Angle dependence Ic(B,θ) of superconducting tape is a crucial parameter to calculate the influence of magnetic field during the design of superconducting applications,. This paper focuses on the asymmetrical characteristics found in REBCO tapes and further applications based on this phenomenon. This paper starts with angle dependence measurements of different HTS tapes, asymmetrical characteristics are found in some of the testing samples. On basis of this property, optimization of superconducting coils in superconducting motor, transformer and insert magnet is discussed by simulation. Simplified experiments which represent the structure of insert magnet were carried out to prove the validity of numerical studies. Conclusions obtained in this paper show that the asymmetrical property of superconducting tape is quite important in design of superconducting applications, and optimized winding technique based on this property can be used to improve the performance of superconducting devices.

Modelling generalisation and power dissipation of flexible-wheel suspension concept for planetary surface vehicles

NASA Astrophysics Data System (ADS)

Cao, Dongpu; Khajepour, Amir; Song, Xubin

2011-08-01

Flexible-wheel (FW) suspension concept has been regarded to be one of the novel technologies for future planetary surface vehicles (PSVs). This study develops generalised models for fundamental stiffness and damping properties and power consumption characteristics of the FW suspension with and without considering wheel-hub dimensions. Compliance rolling resistance (CRR) coefficient is also defined and derived for the FW suspension. Based on the generalised models and two dimensionless measures, suspension properties are analysed for two FW suspension configurations. The sensitivity analysis is performed to investigate the effects of the design parameters and operating conditions on the CRR and power consumption characteristic of the FW suspension. The modelling generalisation permits analyses of fundamental properties and power consumption characteristics of different FW suspension designs in a uniform and very convenient manner, which would serve as a theoretical foundation for the design of FW suspensions for future PSVs.

Receiver operating characteristic (ROC) curves: review of methods with applications in diagnostic medicine

NASA Astrophysics Data System (ADS)

Obuchowski, Nancy A.; Bullen, Jennifer A.

2018-04-01

Receiver operating characteristic (ROC) analysis is a tool used to describe the discrimination accuracy of a diagnostic test or prediction model. While sensitivity and specificity are the basic metrics of accuracy, they have many limitations when characterizing test accuracy, particularly when comparing the accuracies of competing tests. In this article we review the basic study design features of ROC studies, illustrate sample size calculations, present statistical methods for measuring and comparing accuracy, and highlight commonly used ROC software. We include descriptions of multi-reader ROC study design and analysis, address frequently seen problems of verification and location bias, discuss clustered data, and provide strategies for testing endpoints in ROC studies. The methods are illustrated with a study of transmission ultrasound for diagnosing breast lesions.

Characteristics of suspended and streambed sediment within constructed chutes and the main channel at Upper Hamburg and Glovers Point Bends, Missouri River, Nebraska, 2008

USGS Publications Warehouse

Woodward, Brenda K.; Rus, David L.

2011-01-01

The U.S. Army Corps of Engineers, Omaha District, as part of the Missouri River Bank Stabilization and Navigation Mitigation Project, has constructed 17 off-channel chutes along the channelized Missouri River, downstream from Sioux City, Iowa, to increase habitat diversity. To better understand characteristics of suspended and streambed sediment within these constructed chutes, the U.S. Geological Survey investigated specific aspects of chute design and function in relation to sediment characteristics including: (1) effects of inlet structures; (2) changes occurring between the inlet and the outlet of a chute; (3) effects of chutes on sediment characteristics in the main channel; and (4) differences in chute dynamics between sampled chutes. Two chutes differing in design, location, and dynamics were studied, Upper Hamburg Bend near Nebraska City, Nebr., and Glovers Point Bend near Winnebago, Nebr. Each site was characterized using five or more sampling transects (two in the chute and three to four in the main channel) designed to bracket sediment exchanges between chutes and the main channel. A sixth transect was included at the Upper Hamburg Bend study site to account for the effects of a nontarget chute having its inlet midway between the inlet and outlet of the primary chute. Representative samples of suspended and streambed sediment were collected at each transect, along with measurements of turbidity and streamflow, between June and November 2008. Four sets of samples were collected at the Glovers Point Bend study site and five sample sets were collected from the Upper Hamburg Bend study site. Results from paired t-tests and standard t-tests indicated that the inlet structure design, passing inflow only from the top of the main-channel water column, reduced the supply of coarse-grained suspended sediment entering the chutes. Statistical comparisons did not indicate differences between the inlet and outlet of either chute; however, anecdotal evidence of recent bank erosion and in-channel deposition was observed in both chutes during the study period. Chutes had little effect on Missouri River main-channel sediment characteristics, which could be explained by the much greater streamflow of the main channel. Between-chute comparisons showed no significant differences in the suspended-sediment characteristics; however, the Upper Hamburg Bend chute had a coarser streambed, wider channel, and much greater streamflow than did the Glovers Point Bend chute.

An Overview of Structural Characteristics in Problematic Video Game Playing.

PubMed

Griffiths, Mark D; Nuyens, Filip

2017-01-01

There are many different factors involved in how and why people develop problems with video game playing. One such set of factors concerns the structural characteristics of video games (i.e., the structure, elements, and components of the video games themselves). Much of the research examining the structural characteristics of video games was initially based on research and theorizing from the gambling studies field. The present review briefly overviews the key papers in the field to date. The paper examines a number of areas including (i) similarities in structural characteristics of gambling and video gaming, (ii) structural characteristics in video games, (iii) narrative and flow in video games, (iv) structural characteristic taxonomies for video games, and (v) video game structural characteristics and game design ethics. Many of the studies carried out to date are small-scale, and comprise self-selected convenience samples (typically using self-report surveys or non-ecologically valid laboratory experiments). Based on the small amount of empirical data, it appears that structural features that take a long time to achieve in-game are the ones most associated with problematic video game play (e.g., earning experience points, managing in-game resources, mastering the video game, getting 100% in-game). The study of video games from a structural characteristic perspective is of benefit to many different stakeholders including academic researchers, video game players, and video game designers, as well as those interested in prevention and policymaking by making the games more socially responsible. It is important that researchers understand and recognize the psycho-social effects and impacts that the structural characteristics of video games can have on players, both positive and negative.

The Influence of Learner Characteristics on Satisfaction with Interactive Televised Courses in Florida Community Colleges.

ERIC Educational Resources Information Center

Bower, Beverly L.; Kamata, Akihito; Smith, Kathleen Shea

This report describes a pilot project designed to explore the influence of particular personality and demographic characteristics on community college student satisfaction with distance learning, specifically interactive telecommunications (ITV) courses. The study used the Telecourse Evaluation Questionnaire (TEQ) and the Sixteen Personality…

Modeling Gameplay Enjoyment, Goal Orientations, and Individual Characteristics

ERIC Educational Resources Information Center

Quick, John M.; Atkinson, Robert K.

2014-01-01

The purpose of this study was to investigate the relationships between gameplay enjoyment, gaming goal orientations, and individual characteristics. A total of 301 participants were surveyed and the data were analyzed using structural equation modeling. This led to an expanded Gameplay Enjoyment Model (GEM) with 41 game design features that…

APHASIC CHILDREN, IDENTIFICATION AND EDUCATION BY THE ASSOCIATION METHOD.

ERIC Educational Resources Information Center

MCGINNIS, MILDRED A.

THIS BOOK IS DESIGNED TO DEFINE APHASIA AND ITS CHARACTERISTICS, TO PRESENT A PROCEDURE FOR TEACHING LANGUAGE TO APHASIC CHILDREN, AND TO APPLY THIS PROCEDURE TO ELEMENTARY SCHOOL SUBJECTS. OTHER HANDICAPPING CONDITIONS WHICH COMPLICATE THE DIAGNOSIS OF APHASIA ARE PRESENTED BY MEANS OF CASE STUDIES. CHARACTERISTICS OF TWO TYPES OF…

Triple redundant computer system/display and keyboard subsystem interface

NASA Technical Reports Server (NTRS)

Gulde, F. J.

1973-01-01

Interfacing of the redundant display and keyboard subsystem with the triple redundant computer system is defined according to space shuttle design. The study is performed in three phases: (1) TRCS configuration and characteristics identification; (2) display and keyboard subsystem configuration and characteristics identification, and (3) interface approach definition.

SECONDARY COMBUSTION OF PENTABORANE-HYDRAZINE EXHAUST IN AIR

DTIC Science & Technology

The design of the first of two liquid micromotors , has been completed. This micromotor will be used for the determination of characteristic velocity... micromotor and auxiliary equipment has been initiated. A tentative test plan has been developed for the study of the combustion characteristics in air of the pentaborane-hydrazine system.

Psychometric Properties of Characteristics of Teacher Professional Development Instrument

ERIC Educational Resources Information Center

Soine, Karen M.

2011-01-01

This primary purpose of the study was to expand the work of Garet, Porter, Desimone, Birman, and Yoon (2001) by creating and psychometrically testing an instrument designed to measure teachers' perceptions of characteristics of professional development. Elementary teachers (n = 406) from five school districts in Washington State participating in a…

Doubly blind: a systematic review of gender in randomised controlled trials.

PubMed

Phillips, Susan P; Hamberg, Katarina

2016-01-01

Although observational data show social characteristics such as gender or socio-economic status to be strong predictors of health, their impact is seldom investigated in randomised controlled studies (RCTs). Using a random sample of recent RCTs from high-impact journals, we examined how the most often recorded social characteristic, sex/gender, is considered in design, analysis, and interpretation. Of 712 RCTs published from September 2008 to 31 December 2013 in the Annals of Internal Medicine, British Medical Journal, Lancet, Canadian Medical Association Journal, or New England Journal of Medicine, we randomly selected 57 to analyse funding, methods, number of centres, documentation of social circumstances, inclusion/exclusion criteria, proportions of women/men, and reporting about sex/gender in analyses and discussion. Participants' sex was recorded in most studies (52/57). Thirty-nine percent included men and women approximately equally. Overrepresentation of men in 43% of studies without explicit exclusions for women suggested interference in selection processes. The minority of studies that did analyse sex/gender differences (22%) did not discuss or reflect upon these, or dismissed significant findings. Two studies reinforced traditional beliefs about women's roles, finding no impact of breastfeeding on infant health but nevertheless reporting possible benefits. Questionable methods such as changing protocols mid-study, having undefined exclusion criteria, allowing local researchers to remove participants from studies, and suggesting possible benefit where none was found were evident, particularly in industry-funded research. Social characteristics like sex/gender remain hidden from analyses and interpretation in RCTs, with loss of information and embedding of error all along the path from design to interpretation, and therefore, to uptake in clinical practice. Our results suggest that to broaden external validity, in particular, more refined trial designs and analyses that account for sex/gender and other social characteristics are needed.

A systematic review of relations between neighborhoods and mental health.

PubMed

Truong, Khoa D; Ma, Sai

2006-09-01

The relationship between neighborhood characteristics and resident mental health has been widely investigated in individual studies in recent years, but this literature is not adequately reviewed. To systematically review relevant individual research of the relation between neighborhoods and adult mental health by identifying and synthesizing all relevant studies in this literature. We conducted an electronic search with PubMed and PsycINFO, and manual reference-checking, resulting in 8,562 screened studies of which 29 were selected. Studies were included in the main synthesis if they (i) were published in English in peer reviewed journals; (ii) had relevant definitions and measures of neighborhood characteristics; (iii) utilized standardized measures of adult mental health; (iv) controlled for individual characteristics; (v) reported quantitative results; and, (vi) studied a population in a developed country. We focused on two key areas within this literature: the methodologies utilized to study neighborhood effects and quantitative results. With regard to the former, we examined five major issues: (i) definitions and measures of neighborhoods; (ii) definitions and measures of mental health; (iii) controls for individual level characteristics; (iv) conceptual models; and (v) analytical models. As for quantitative results, the relation was reviewed by types of neighborhood characteristics. We summarized general quantitative findings and drew common conclusions across groups of studies. 27/29 studies found statistically significant association between mental health and at least one measure of neighborhood characteristics, after adjusting for individual factors. This association was evident for all types of neighborhood features, varying from sociodemographic characteristics to physical environment, and from objective to subjective measures. Neighborhood effects were weakened when adding individual-level characteristics into the regression models, and were generally modest relative to individual effects. Although the evidence is highly consistent across studies, detailed evaluation of each individual study reveals a complex reality. The included studies used various study designs and measures of mental health and neighborhoods, making generalization of their relationships less meaningful. It is not possible to conclude that studies with weaker controls for individual characteristics found stronger association between neighborhoods and mental health and vice versa. As only two studies used randomized and controlled trials, causal effects must be interpreted with caution. Formal meta-analysis techniques cannot be used due to large heterogeneity across the included studies. Efficient methods for quantitative analysis remain a great challenge. The current evidence suggests that efforts to improve mental health may be limited if only individual-level interventions are implemented. The calculation of the costs and benefits of neighborhood-level interventions deserves more attention. Moreover, policy makers may want to incorporate mental health as a measure for evaluating neighborhood improvement programs. There are not enough replicated or comparable studies in this literature to make more precise quantitative conclusions of this relation. Key aspects of study design and analyses could be improved to better understand the true nature of causal relationships. The data resolution of neighborhood characteristics needs to better match with the scale of neighborhood definition that is hypothesized to affect the residents' mental health. As experimental designs are rare in this area, thoughtful use of panel data, instrumental variable (IV) techniques, and other non-experimental approaches deserves further exploration.

Exploring academics' views on designs, methods, characteristics and outcomes of inclusive health research with people with intellectual disabilities: a modified Delphi study

PubMed Central

Frankena, T K; Naaldenberg, J; Cardol, M; Meijering, J V; Leusink, G; van Schrojenstein Lantman-de Valk, H M J

2016-01-01

Background The British Medical Journal's (BMJ's) patient revolution strives for collaboration with patients in healthcare and health research. This paper studies collaboration with people with intellectual disabilities (ID) in health research, also known as inclusive health research. Currently, transparency and agreement among academics is lacking regarding its main aspects, preventing upscaling of the patient revolution. Objective This study aims to gain agreement among academics on 3 aspects of inclusive health research for people with ID: (1) designs and methods, (2) most important characteristics and (3) outcomes. Design A Delphi study was conducted with academics with experience in inclusive (health) research and on people with ID. The study consisted of 2 sequential questionnaire rounds (n=24; n=17), followed by in-depth interviews (n=10). Results Academics agreed on (1) a collaborative approach to be most suitable to inclusive health research, (2) characteristics regarding the accessibility and facilitation of inclusive health research, and (3) several outcomes of inclusive health research for people with ID and healthcare. Other characteristics agreed on included: atmosphere, relationship, engagement, partnership and power. It was stressed that these characteristics ensure meaningful inclusion. Interviewed academics voiced the need for a tool supporting the facilitation and evaluation of inclusive health research. There was ambiguity as to what this tool should comprise and the extent to which it was possible to capture the complex process of inclusive health research. Discussion and conclusions This study underlines the need for transparency, facilitation and evaluation of inclusive health research. The need for in-depth interviews after 2 Delphi rounds underlines its complexity and context dependence. To increase process transparency, future research should focus on gaining insight into inclusive health research in its context. A tool could be developed to facilitate and evaluate inclusive health research. This tool will be partially applicable to participatory research in general and thereby upscale the patient revolution. PMID:27540101

REVIEW OF POWER AND HEAT REACTOR DESIGNS. Domestic and Foreign

DOE Office of Scientific and Technical Information (OSTI.GOV)

Appleby, E.R., comp

1963-10-01

Unclassified information from domestic and foreign literature from January 1952 through September 1963 is compiled. Design characteristics and current information on the status of the individual designs are given, along with references for the associated literature. SNAP systems, proposed reactors, and chemonuclear and test reactors with characteristics similar to power reactors are included. The designs are indexed by name, location, type, and some special characteristics. (D.C.W.)

Mariner Jupiter/Saturn infrared instrument study

NASA Technical Reports Server (NTRS)

1972-01-01

The Mariner Jupiter/Saturn infrared instrumentation conceptual design study was conducted to determine the physical and operational characteristics of the instruments needed to satisfy the experiment science requirements. The design of the instruments is based on using as many proven concepts as possible. Many design features are taken from current developments such as the Mariner, Pioneer 10, Viking Orbiter radiometers, and Nimbus D spectrometer. Calibration techniques and error analysis for the instrument system are discussed.

V/STOL tilt rotor aircraft study. Volume 1: Conceptual design of useful military and/or commercial aircraft

NASA Technical Reports Server (NTRS)

1972-01-01

The conceptual designs of four useful tilt-rotor aircraft for the 1975 to 1980 time period are presented. Parametric studies leading to design point selection are described, and the characteristics and capabilities of each configuration are presented. An assessment is made of current technology status, and additional tilt-rotor research programs are recommended to minimize the time, cost, and risk of development of these vehicles.

Removal Effectiveness of Co-mingling Off-site Flows with FDOT Right-of-Way Stormwater : [Summary].

DOT National Transportation Integrated Search

2017-11-10

Because designers have many options in designing runoff systems, the researchers studied and simulated many scenarios. They considered five Florida regions, each with a characteristic rainfall pattern. For each location, assuming rainfall of one inch...

Space telescope optical telescope assembly/scientific instruments. Phase B: -Preliminary design and program definition study; Volume 2A: Planetary camera report

NASA Technical Reports Server (NTRS)

1976-01-01

Development of the F/48, F/96 Planetary Camera for the Large Space Telescope is discussed. Instrument characteristics, optical design, and CCD camera submodule thermal design are considered along with structural subsystem and thermal control subsystem. Weight, electrical subsystem, and support equipment requirements are also included.

Current Issues in Art and Design Education: Modularization and Course Ethos: The Case of Art and Design Higher Education.

ERIC Educational Resources Information Center

Wayte, Gillian; Wayte, Nick

1990-01-01

Examines why art and design educators resist the modularization of degree-level courses. Identifies key characteristics of art education in England through an ethnographic study. Discusses government policy and rationales for modular and integrated courses. Concludes that the holistic approach to education allows students to expound and develop…

Design of field experiments: Influence of treatment response relative to standard deviation and blocking factor characteristics on efficient blocking strategy

USDA-ARS?s Scientific Manuscript database

Selection of experimental design can markedly influence efficiency of field research. This study used Monte Carlo simulations to compare the ability of different field experimental designs to distinguish defined treatment differences, and the paper concludes with a section on practical use of the in...

Study on Effects of The Shape of Cavitator on Supercavitation Flow Field Characteristics

NASA Astrophysics Data System (ADS)

Wang, Rui; Dang, Jianjun; Yao, Zhong

2018-03-01

The cavitator is the key part of the nose of the vehicle to induce the formation of supercavity, which has an important influence in the cavity formation rate, cavity shape and cavity stability. To study the influence of the shape on the supercavitation flew field characteristics, the cavity characteristics and the resistance characteristics of different shapes of cavitator under different working conditions are obtained by combining technical methods of numerical simulation and experimental research in water tunnel. The simulation results are contrast and analyzed with the test results. The analysis results show that : in terms of the cavity size, the inverted-conic cavitator can form the biggest cavity size, followed by the disk cavitator, and the truncated-conic cavitator is the least; in terms of the cavity formation speed, the inverted-conic cavitator has the fastest cavity formation speed, then is the truncated-conic cavitator, and the disk cavitator is the least; in terms of the drag characteristic, the truncated-conic cavitator has the maximum coefficient, disk cavitator is the next, the inverted-conic cavitator is the minimal. The research conclusion can provide reference and basis for the head shape design of supercavitating underwater ordnance and the design of hydrodynamic layout.

Is the cigarette pack just a wrapper or a characteristic of the product itself? A qualitative study of adult smokers to inform U.S. regulations

PubMed Central

Averett, Paige E.; Blanchflower, Tiffany; Gregory, Kyle R.

2018-01-01

Purpose In the U.S., tobacco products are now regulated by the Food and Drug Administration (FDA). Litigation has quickly followed. One area of controversy is when a change to the design of the cigarette pack requires approval through FDA’s rigorous premarket review process. In this paper, we examine how adult U.S. smokers view the connection between the design of cigarette packs and the characteristics of the cigarettes within. Methods Data for this qualitative study came from six focus groups conducted in March 2017 with adult smokers. Two groups consisted of lesbian, gay, and bisexual (LGB) participants; two groups of participants with less than four years of college education; one group of LGB and straight identity; and, one group of the general population. All groups were selected for regional, gender, and racial/ethnic diversity. Participants (n = 33) represented all nine U.S. Census divisions. We conducted constant comparison qualitative analysis utilizing a grounded theory approach. Results Participants’ views reflected a belief that pack design is clearly a reflection of the cigarettes within and that a change in the pack signaled a change in the cigarettes. However, some participants felt price was the salient characteristic of cigarettes and design mattered more for enticing young people to smoke. Conclusions Changes in pack design signal changes to the product for smokers. Pack design and changes to pack design are seen as particularly relevant to new and young smokers. These findings provide support for regulations that require assessment of cigarette pack design changes for impacts on public health. PMID:29479517

Flight deck design and pilot selection: anthropometric considerations.

PubMed

Buckle, P W; David, G C; Kimber, A C

1990-12-01

Safe and successful operation of flight displays and controls is, in part, dependent on the anthropometric characteristics of the pilots with respect to the design of a particular aircraft. This paper describes the approach required to optimise this fit and provides guidelines for both those responsible for design and those who select pilot recruits. The major results reported are those for a British population, although the aircraft considered (Boeing 737-200, 747, 757 and Lockheed TriStar) are used by airlines throughout the world. The study shows that limitations in design considerably reduce the pool of potential recruits with the appropriate anthropometric characteristics. The selection criteria, based on functional seated eye height, might exclude 73% of the British, 19-65-year-old female population and 13% of the male population.

Melanocortin-1 receptor, skin cancer and phenotypic characteristics (M-SKIP) project: study design and methods for pooling results of genetic epidemiological studies

PubMed Central

2012-01-01

Background For complex diseases like cancer, pooled-analysis of individual data represents a powerful tool to investigate the joint contribution of genetic, phenotypic and environmental factors to the development of a disease. Pooled-analysis of epidemiological studies has many advantages over meta-analysis, and preliminary results may be obtained faster and with lower costs than with prospective consortia. Design and methods Based on our experience with the study design of the Melanocortin-1 receptor (MC1R) gene, SKin cancer and Phenotypic characteristics (M-SKIP) project, we describe the most important steps in planning and conducting a pooled-analysis of genetic epidemiological studies. We then present the statistical analysis plan that we are going to apply, giving particular attention to methods of analysis recently proposed to account for between-study heterogeneity and to explore the joint contribution of genetic, phenotypic and environmental factors in the development of a disease. Within the M-SKIP project, data on 10,959 skin cancer cases and 14,785 controls from 31 international investigators were checked for quality and recoded for standardization. We first proposed to fit the aggregated data with random-effects logistic regression models. However, for the M-SKIP project, a two-stage analysis will be preferred to overcome the problem regarding the availability of different study covariates. The joint contribution of MC1R variants and phenotypic characteristics to skin cancer development will be studied via logic regression modeling. Discussion Methodological guidelines to correctly design and conduct pooled-analyses are needed to facilitate application of such methods, thus providing a better summary of the actual findings on specific fields. PMID:22862891

Study of quiet turbofan STOL aircraft for short-haul transportation. Volume 2: Aircraft

NASA Technical Reports Server (NTRS)

1973-01-01

A study of the quiet turbofan STOL aircraft for short haul transportation was conducted. The objectives of the study were as follows: (1) to determine the relationships between STOL characteristics and economic and social viability of short haul air transportation, (2) to identify critical technology problems involving introduction of STOL short haul systems, (3) to define representative aircraft configurations, characteristics, and costs, and (4) to identify high payoff technology areas to improve STOL systems. The analyses of the aircraft designs which were generated to fulfill the objectives are summarized. The baseline aircraft characteristics are documented and significant trade studies are presented.

Layout Design of Human-Machine Interaction Interface of Cabin Based on Cognitive Ergonomics and GA-ACA.

PubMed

Deng, Li; Wang, Guohua; Yu, Suihuai

2016-01-01

In order to consider the psychological cognitive characteristics affecting operating comfort and realize the automatic layout design, cognitive ergonomics and GA-ACA (genetic algorithm and ant colony algorithm) were introduced into the layout design of human-machine interaction interface. First, from the perspective of cognitive psychology, according to the information processing process, the cognitive model of human-machine interaction interface was established. Then, the human cognitive characteristics were analyzed, and the layout principles of human-machine interaction interface were summarized as the constraints in layout design. Again, the expression form of fitness function, pheromone, and heuristic information for the layout optimization of cabin was studied. The layout design model of human-machine interaction interface was established based on GA-ACA. At last, a layout design system was developed based on this model. For validation, the human-machine interaction interface layout design of drilling rig control room was taken as an example, and the optimization result showed the feasibility and effectiveness of the proposed method.

Layout Design of Human-Machine Interaction Interface of Cabin Based on Cognitive Ergonomics and GA-ACA

PubMed Central

Deng, Li; Wang, Guohua; Yu, Suihuai

2016-01-01

In order to consider the psychological cognitive characteristics affecting operating comfort and realize the automatic layout design, cognitive ergonomics and GA-ACA (genetic algorithm and ant colony algorithm) were introduced into the layout design of human-machine interaction interface. First, from the perspective of cognitive psychology, according to the information processing process, the cognitive model of human-machine interaction interface was established. Then, the human cognitive characteristics were analyzed, and the layout principles of human-machine interaction interface were summarized as the constraints in layout design. Again, the expression form of fitness function, pheromone, and heuristic information for the layout optimization of cabin was studied. The layout design model of human-machine interaction interface was established based on GA-ACA. At last, a layout design system was developed based on this model. For validation, the human-machine interaction interface layout design of drilling rig control room was taken as an example, and the optimization result showed the feasibility and effectiveness of the proposed method. PMID:26884745

A Comparative Study of Competency-Based Courses Demonstrating a Potential Measure of Course Quality and Student Success

ERIC Educational Resources Information Center

Krause, Jackie; Dias, Laura Portolese; Schedler, Chris

2015-01-01

While competency-based education is growing, standardized tools for evaluating the unique characteristics of course design in this domain are still under development. This preliminary research study evaluated the effectiveness of a rubric developed for assessing course design of competency-based courses in an undergraduate Information Technology…

Quiet engine program flight engine design study

NASA Technical Reports Server (NTRS)

Klapproth, J. F.; Neitzel, R. E.; Seeley, C. T.

1974-01-01

The results are presented of a preliminary flight engine design study based on the Quiet Engine Program high-bypass, low-noise turbofan engines. Engine configurations, weight, noise characteristics, and performance over a range of flight conditions typical of a subsonic transport aircraft were considered. High and low tip speed engines in various acoustically treated nacelle configurations were included.

Space shuttle/food system study. Volume 2: Supporting appendices, oven study

NASA Technical Reports Server (NTRS)

1975-01-01

Calculations and data regarding the development of a galley oven for use in the space shuttle are presented. Heat flow, heat transfer, and food heating characteristics are given for various oven designs. A design approach to guarantee structural reliability is also presented, in which the oven closure, door, and basic mounting points are considered.

The Impact of Learner's Prior Knowledge on Their Use of Chemistry Computer Simulations: A Case Study

ERIC Educational Resources Information Center

Liu, Han-Chin; Andre, Thomas; Greenbowe, Thomas

2008-01-01

It is complicated to design a computer simulation that adapts to students with different characteristics. This study documented cases that show how college students' prior chemistry knowledge level affected their interaction with peers and their approach to solving problems with the use of computer simulations that were designed to learn…

Feasibility study of modern airships, phase 1. Volume 3: Historical overview (task 1)

NASA Technical Reports Server (NTRS)

Faurote, G. L.

1975-01-01

The history of lighter-than-air vehicles is reviewed in terms of providing a background for the mission analysis and parametric analysis tasks. Data from past airships and airship operations are presented in the following areas: (1) parameterization of design characteristics; (2) markets, missions, costs, and operating procedures, (3) indices of efficiency for comparison; (4) identification of critical design and operational characteristics; and (5) definition of the 1930 state-of-the-art and the 1974 state-of-the-art from a technical and economic standpoint.

Analysis of flow field characteristics in IC equipment chamber based on orthogonal design

NASA Astrophysics Data System (ADS)

Liu, W. F.; Yang, Y. Y.; Wang, C. N.

2017-01-01

This paper aims to study the influence of the configuration of processing chamber as a part of IC equipment on flow field characteristics. Four parameters, including chamber height, chamber diameter, inlet mass flow rate and outlet area, are arranged using orthogonally design method to study their influence on flow distribution in the processing chamber with the commercial software-Fluent. The velocity, pressure and temperature distribution above the holder were analysed respectively. The velocity difference value of the gas flow above the holder is defined as the evaluation criteria to evaluate the uniformity of the gas flow. The quantitative relationship between key parameters and the uniformity of gas flow was found through analysis of experimental results. According to our study, the chamber height is the most significant factor, and then follows the outlet area, chamber diameter and inlet mass flow rate. This research can provide insights into the study and design of configuration of etcher, plasma enhanced chemical vapor deposition (PECVD) equipment, and other systems with similar configuration and processing condition.

Effect of Educational Agent and Its Form Characteristics on Problem Solving Ability Perception of Students in Online Task Based Learning Media

ERIC Educational Resources Information Center

Akyuz, Halil Ibrahim; Keser, Hafize

2015-01-01

The aim of this study is to investigate the effect of an educational agent, used in online task based learning media, and its form characteristics on problem solving ability perceptions of students. 2x2 factorial design is used in this study. The first study factor is the role of the educational agent and the second factor is form characteristics…

Women's Perceptions of Usefulness and Ease of Use of Four Healthy Eating Blog Characteristics: A Qualitative Study of 33 French-Canadian Women.

PubMed

Bissonnette-Maheux, Véronique; Dumas, Audrée-Anne; Provencher, Véronique; Lapointe, Annie; Dugrenier, Marilyn; Straus, Sharon; Gagnon, Marie-Pierre; Desroches, Sophie

2017-10-26

Healthy eating blogs are knowledge translation tools used by nutrition and dietetics practitioners for helping people improve their health behaviors and food choices. Our aim was to explore women's perceptions of the usefulness and ease of use of healthy eating blog (HEB) characteristics that might increase potential users' intention to use them as tools to improve their dietary habits. We conducted qualitative research using semi-structured individual interviews. Thirty-three women (mean age of 44 years; range=27 to 61 years) living in the Quebec City, Canada, metropolitan area were studied. Four existing HEBs, written by French-Canadian registered dietitians (RDs) whose main objective was the promotion of a healthy diet, were explored by women during individual interviews. A standardized open-ended interview questionnaire based on the Technology Acceptance Model was used to identify women's perceptions about characteristics of type of blog content delivery, RD blogger's delivery of information, blog layout, and blog design. Women's perceptions toward the contribution of HEB characteristics to the usefulness and ease of use of those tools to improve their dietary habits were measured. Interviews were audiorecorded, transcribed verbatim, coded, and analyzed through an inductive content analysis using NVivo software. The most useful characteristics of type of blog content delivery identified by women were recipes, hyperlinks, and references. Among characteristics of RD blogger's delivery of information, most women reported that interaction between blog readers and the RD blogger created a sense of proximity and of connection that was helpful for improving their dietary behaviors. Women's perceptions toward various characteristics of blog layout and design were also discussed. Incorporating specific characteristics when designing HEBs should be considered by RDs and future research to promote the use of those tools to support dietary behavior change efforts of internet users. Copyright © 2017 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Experimental studies of characteristic combustion-driven flows for CFD validation

NASA Technical Reports Server (NTRS)

Santoro, R. J.; Moser, M.; Anderson, W.; Pal, S.; Ryan, H.; Merkle, C. L.

1992-01-01

A series of rocket-related studies intended to develop a suitable data base for validation of Computational Fluid Dynamics (CFD) models of characteristic combustion-driven flows was undertaken at the Propulsion Engineering Research Center at Penn State. Included are studies of coaxial and impinging jet injectors as well as chamber wall heat transfer effects. The objective of these studies is to provide fundamental understanding and benchmark quality data for phenomena important to rocket combustion under well-characterized conditions. Diagnostic techniques utilized in these studies emphasize determinations of velocity, temperature, spray and droplet characteristics, and combustion zone distribution. Since laser diagnostic approaches are favored, the development of an optically accessible rocket chamber has been a high priority in the initial phase of the project. During the design phase for this chamber, the advice and input of the CFD modeling community were actively sought through presentations and written surveys. Based on this procedure, a suitable uni-element rocket chamber was fabricated and is presently under preliminary testing. Results of these tests, as well as the survey findings leading to the chamber design, were presented.

A multi-criteria decision aid methodology to design electric vehicles public charging networks

NASA Astrophysics Data System (ADS)

Raposo, João; Rodrigues, Ana; Silva, Carlos; Dentinho, Tomaz

2015-05-01

This article presents a new multi-criteria decision aid methodology, dynamic-PROMETHEE, here used to design electric vehicle charging networks. In applying this methodology to a Portuguese city, results suggest that it is effective in designing electric vehicle charging networks, generating time and policy based scenarios, considering offer and demand and the city's urban structure. Dynamic-PROMETHE adds to the already known PROMETHEE's characteristics other useful features, such as decision memory over time, versatility and adaptability. The case study, used here to present the dynamic-PROMETHEE, served as inspiration and base to create this new methodology. It can be used to model different problems and scenarios that may present similar requirement characteristics.

Seasonal rationalization of river water quality sampling locations: a comparative study of the modified Sanders and multivariate statistical approaches.

PubMed

Varekar, Vikas; Karmakar, Subhankar; Jha, Ramakar

2016-02-01

The design of surface water quality sampling location is a crucial decision-making process for rationalization of monitoring network. The quantity, quality, and types of available dataset (watershed characteristics and water quality data) may affect the selection of appropriate design methodology. The modified Sanders approach and multivariate statistical techniques [particularly factor analysis (FA)/principal component analysis (PCA)] are well-accepted and widely used techniques for design of sampling locations. However, their performance may vary significantly with quantity, quality, and types of available dataset. In this paper, an attempt has been made to evaluate performance of these techniques by accounting the effect of seasonal variation, under a situation of limited water quality data but extensive watershed characteristics information, as continuous and consistent river water quality data is usually difficult to obtain, whereas watershed information may be made available through application of geospatial techniques. A case study of Kali River, Western Uttar Pradesh, India, is selected for the analysis. The monitoring was carried out at 16 sampling locations. The discrete and diffuse pollution loads at different sampling sites were estimated and accounted using modified Sanders approach, whereas the monitored physical and chemical water quality parameters were utilized as inputs for FA/PCA. The designed optimum number of sampling locations for monsoon and non-monsoon seasons by modified Sanders approach are eight and seven while that for FA/PCA are eleven and nine, respectively. Less variation in the number and locations of designed sampling sites were obtained by both techniques, which shows stability of results. A geospatial analysis has also been carried out to check the significance of designed sampling location with respect to river basin characteristics and land use of the study area. Both methods are equally efficient; however, modified Sanders approach outperforms FA/PCA when limited water quality and extensive watershed information is available. The available water quality dataset is limited and FA/PCA-based approach fails to identify monitoring locations with higher variation, as these multivariate statistical approaches are data-driven. The priority/hierarchy and number of sampling sites designed by modified Sanders approach are well justified by the land use practices and observed river basin characteristics of the study area.

Relationship Between Job Characteristics and Organizational Commitment: A Descriptive Analytical Study.

PubMed

Faraji, Obeidollah; Ramazani, Abbas Ali; Hedaiati, Pouria; Aliabadi, Ali; Elhamirad, Samira; Valiee, Sina

2015-11-01

Many factors influence the organizational commitment of employees. One of these factors is job designing since it affects the attitude, beliefs, and feelings of the organization employees. We aimed to determine the relationship between job characteristics and organizational commitment among the employees of hospitals. In this descriptive and correlational study, 152 Iranian employees of the hospitals (physicians, nurses, and administrative staff) were selected through stratified random sampling. Data gathered using 3-part questionnaire of "demographic information", "job characteristics model," and "organizational commitment," in 2011. Study data were analyzed using SPSS v. 16. There was significant statistical correlation between organizational commitment and variables of educational level (P = 0.001) and job category (P = 0.001). Also, a direct and significant correlation existed between motivating potential score and job feedback on one hand and organizational commitment on the other hand (P = 0.014). According to the results, managers of the hospitals should increase staff's commitment through paying attention to proper job designing.

Effect of Peer-Led Team Learning (PLTL) on Student Achievement, Attitude, and Self-Concept in College General Chemistry in Randomized and Quasi Experimental Designs

ERIC Educational Resources Information Center

Chan, Julia Y. K.; Bauer, Christopher F.

2015-01-01

This study investigated exam achievement and affective characteristics of students in general chemistry in a fully-randomized experimental design, contrasting Peer-Led Team Learning (PLTL) participation with a control group balanced for time-on-task and study activity. This study population included two independent first-semester courses with…

Characteristic of a Digital Correlation Radiometer Back End with Finite Wordlength

NASA Technical Reports Server (NTRS)

Biswas, Sayak K.; Hyde, David W.; James, Mark W.; Cecil, Daniel J.

2017-01-01

The performance characteristic of a digital correlation radiometer signal processing back end (DBE) is analyzed using a simulator. The particular design studied here corresponds to the airborne Hurricane Imaging radiometer which was jointly developed by the NASA Marshall Space Flight Center, University of Michigan, University of Central Florida and NOAA. Laboratory and flight test data is found to be in accord with the simulation results. Overall design seems to be optimum for the typical input signal dynamic range. It was found that the performance of the digital kurtosis could be improved by lowering the DBE input power level. An unusual scaling between digital correlation channels observed in the instrument data is confirmed to be a DBE characteristic.

Streamflow characteristics of the Colorado River Basin in Utah through September 1981

USGS Publications Warehouse

Christensen, R.C.; Johnson, E.B.; Plantz, G.G.

1987-01-01

 This report summarizes discharge data and other streamflow characteristics developed from gag ing-station records collected through September 1981 at 337 stations in the Colorado River Basin in Utah. Data also are included for 14 stations in adjacent areas of the bordering states of Arizona, Colorado, and Wyoming (fig. 1). The study leading to this report was done in cooperation with the U.S. Bureau of Land Management, which needs the streamflow data in order to evaluate impacts of mining on the hydrologic system. The report also will be beneficial to other Federal, State, and county agencies and to individuals concerned with water supply and water problems in the Colorado River Basin.The streamflow characteristics in the report could be useful in many water-related studies that involve the following:Definition of baseline-hydrologic conditions; studies of the effects of man's activities on streamflow; frequency analyses of low and high flows; regional analyses of streamflow characteristics; design of water-supply systems; water-power studies; forecasting of stream discharge; time-series analyses of streamflow; design of flood-control structures; stream-pollution studies; and water-chemistry transport studies.The basic data used to develop the summaries in this report are records of daily and peak discharge collected by the U.S. Geological Survey and other Federal agencies. Much of the work of the Geological Survey was done in cooperation with Federal, State, and county agencies. Discharge recordsincluded in the report generally were for stations with at least 1 complete water year of record and nearby stations that were on the same stream and had different streamflow characteristics. A water year is a 12-month period ending September 30, and it is designated by the calendar year in which it ends. For streams that have had significant changes in regulation by reservoirs or diversions, the records before and after those changes were used separately to provide streamflow characteristics for each period of homogeneous streamflow and to show the change in the characteristics. Summaries for annual peak discharge are included only for stations with 5 or more years of data. The summaries of annual lowest and highest mean-discharge frequency are reported for stations with 10 or more years of daily-discharge record and for which computer-generated frequency curves provided a reasonable fit of the plotted data.

10 CFR 431.401 - Petitions for waiver, and applications for interim waiver, of test procedure.

Code of Federal Regulations, 2013 CFR

2013-01-01

... more design characteristics which prevent testing of the basic model according to the prescribed test... its true energy consumption characteristics as to provide materially inaccurate comparative data. (2... design characteristic(s) constituting the grounds for the petition, and the specific requirements sought...

10 CFR 431.401 - Petitions for waiver, and applications for interim waiver, of test procedure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... more design characteristics which prevent testing of the basic model according to the prescribed test... its true energy consumption characteristics as to provide materially inaccurate comparative data. (2... particular basic model(s) for which a waiver is requested, the design characteristic(s) constituting the...

10 CFR 431.401 - Petitions for waiver, and applications for interim waiver, of test procedure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... more design characteristics which prevent testing of the basic model according to the prescribed test... its true energy consumption characteristics as to provide materially inaccurate comparative data. (2... design characteristic(s) constituting the grounds for the petition, and the specific requirements sought...

10 CFR 431.401 - Petitions for waiver, and applications for interim waiver, of test procedure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... more design characteristics which prevent testing of the basic model according to the prescribed test... its true energy consumption characteristics as to provide materially inaccurate comparative data. (2... design characteristic(s) constituting the grounds for the petition, and the specific requirements sought...

10 CFR 431.401 - Petitions for waiver, and applications for interim waiver, of test procedure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... more design characteristics which prevent testing of the basic model according to the prescribed test... its true energy consumption characteristics as to provide materially inaccurate comparative data. (2... particular basic model(s) for which a waiver is requested, the design characteristic(s) constituting the...

Report of the Working Design Group

NASA Technical Reports Server (NTRS)

1992-01-01

The engineering study group in the LOUISA workshop was responsible for producing a preliminary general design for an optical synthetic aperture telescope on the Moon. This design is intended to be a test case for focusing continuing design studies. The scope of the design included consideration of the array geometry, individual telescopes, metrology, site attributes, and construction. However, no attempt was made to go into further depth in the design than to cover the essential characteristics of the instrument. The starting point for the array design was the lunar optical array discussed by Burke (1985). His array geometry followed the design and correlation procedure of the 27-element Very Large Array (VLA) radio telescopes near Socorro, New Mexico.

Physical characteristics as risk factors for sports injuries: a four year prospective study.

PubMed

Twellaar, M; Verstappen, F T; Huson, A; van Mechelen, W

1997-01-01

A variety of physical characteristics of athletes has been proposed to be related to the risk to sustain a sports injury. The aim of the present study was to determine the influence of flexibility, anthropometric characteristics and malalignment of the lower extremities on the risk to sustain a sports injury, using a prospective study design and subjects exposed to rather equal extrinsic risk factors. Physical education students (N = 136) were followed during their four-year education. Sixteen flexibility indices, four anthropometric characteristics and five malalignment indices of the lower extremities were assessed at the start of the study and all sports injuries sustained in that four-year period were recorded. No influence of flexibility or anthropometric variables on the total number of injuries or the number of several specific injuries (ankle sprain, muscle rupture, dislocation, shin splints, backache) could be established. Malalignments of the lower extremities (average prevalence 18% and only minor deviations) did show some but inconsistent relations with the number of (specific) injuries. For pelvic obliquity it was positive as predicted, but for malalignment of the rearfoot and a deviant footprint it appeared to be negative. Leg length inequality and malalignment of the knees were not related to injuries. The most likely explanation for these (poor) findings is the relatively low number and great variety of sports injuries recorded. Further, the homogeneity in physical characteristics of the population under study makes it difficult to find significant relationships. A study design that meets both the criterium of similar extrinsic risk factors and that of a wide range of physical characteristics in a representative sporting population, however, is not practicable.

Effects of display characteristics and individual differences on preferences of VDT icon design.

PubMed

Shieh, Kong-King; Ko, Ya-Hsien

2005-04-01

This study explored the effects of display characteristics such as target/background color combination, single/simultaneous presentation, and individual differences by sex, and design specialty on preferences of VDT icon design. The results indicated black targets (black-on-white, black-on-yellow) and black backgrounds (red-on-black, yellow-on-black) were the most popular and white targets (white-on-red, white-on-black) and white backgrounds (blue-on-white, red-on-white) were the second most popular. As for the chromatic color combinations, yellow-on-blue was the most favored. Subjects rated color combinations under single presentation higher than those under simultaneous presentation. Women rated purplish targets and rated purplish and blue backgrounds higher than men. Subjects with design background favored black more either as a target or background, but they favored turquoise less than those without design background.

Characterization of truck traffic in Michigan for the new mechanistic empirical pavement design guide.

DOT National Transportation Integrated Search

2009-12-01

The purpose of this study is to characterize traffic inputs in support of the new Mechanistic- : Empirical Pavement Design Guide (M-E PDG) for the state of Michigan. These traffic : characteristics include monthly distribution factors (MDF), hourly d...

Orbit Transfer Vehicle (OTV) advanced expander cycle engine point design study, volume 2

NASA Technical Reports Server (NTRS)

1981-01-01

The engine requirements are emphasized and include: high specific impulse within a restricted installed length constraint, long life, multiple starts, different thrust levels, and man-rated reliability. The engine operating characteristics and the major component analytical design are summarized.

Meaningful Gamification in an Industrial/Organizational Psychology Course

ERIC Educational Resources Information Center

Stansbury, Jessica A.; Earnest, David R.

2017-01-01

Motivation and game research continue to demonstrate that the implementation of game design characteristics in the classroom can be engaging and intrinsically motivating. The present study assessed the extent to which an industrial organizational psychology course designed learning environment created with meaningful gamification elements can…

Mission Impact Through Neuro-Inspired Design (MIND) Laboratory: Design Principles and Performance Characteristics

DTIC Science & Technology

2013-09-01

sprinkler , fire alarm, and mass-notification systems ). Piping required for the sprinkler system uses dielectric couplers at each penetration of the...environment for neuroscience research designed for studying Soldier- system interactions in support of the U.S. Army Research Laboratory’s (ARL’s...Engineers, of Towson, MD, —designed the heating, ventilation, and air conditioning and electrical systems ; Hi-Tech Services, Inc., of Ferndale, WA

Participation in psychosocial oncology and quality-of-life research: a systematic review.

PubMed

Wakefield, Claire E; Fardell, Joanna E; Doolan, Emma L; Aaronson, Neil K; Jacobsen, Paul B; Cohn, Richard J; King, Madeleine

2017-03-01

Quality-of-life and psychosocial oncology studies that have low participation might have less precision, less statistical power, and can have non-response bias. In this systematic Review, we searched MEDLINE, Embase, and PsycInfo, for paediatric studies published in 2010-15 and adults studies published 2014-15. Studies were eligible if they were original studies published in a peer-reviewed journal; recruited children (aged 0-18 years at diagnosis) with cancer or their parents, or adult patients with cancer; and assessed psychosocial outcomes, including quality of life, depression, anxiety, wellbeing, distress, coping, or adjustment as a primary or secondary outcome. We assessed participation reporting quality, calculated percentages of participation achieved, and measured the influence of study design and participant characteristics. We reviewed 311 studies including a total of 87 240 adults, children, and parents. Mean participation across studies was more than 70% (paediatric participation was 72% and adult participation was 74%). Many studies did not report data essential for the assessment of participation, especially for non-respondents. Studies using a longitudinal cohort design had higher participation than randomised trials. In paediatric studies, recruitment of participants at diagnosis, face to face, and with the use of short questionnaires yielded higher participation. Other study design characteristics (method of data collection, who enrolled the participants, and incentives) and patient characteristics (cancer type, patient or parent age, and sex) did not affect participation in either paediatric or adult studies. Researchers can use these data to improve reporting quality and make evidence-based choices to maximise participation in future studies. Copyright © 2017 Elsevier Ltd. All rights reserved.

Design principles of water sensitive in settlement area on the river banks

NASA Astrophysics Data System (ADS)

Ryanti, E.; Hasriyanti, N.; Utami, W. D.

2018-03-01

This research will formulate the principle of designing settlement area of Kapuas River Pontianak with the approach of water sensitive concept of urban design (WSUD) the densely populated settlement area. By using a case study the approach that is a dense settlement area located on the banks of the river with literature study techniques to formulate the aspects considered and components that are set in the design, descriptive analysis with the rationalistic paradigm for identification characteristics of the settlement in the river banks areas with consideration of WSUD elements and formulate the principles of designing water-sensitive settlement areas. This research is important to do because the problems related to the water management system in the existing riverside settlement in Pontianak has not been maximal to do. So the primary of this research contains several objectives that will be achieved that is identifying the characteristics of riverside settlement area based on consideration of design aspects of the area that are sensitive to water and the principle of designing the area so that the existing problem structure will be formulated in relation to the community’s need for infrastructure in settlement environment and formulate and develop appropriate technology guidelines for integrated water management systems in riverside settlement areas and design techniques for water-sensitive settlements (WSUD).

Effects of mass on aircraft sidearm controller characteristics

NASA Technical Reports Server (NTRS)

Wagner, Charles A.

1994-01-01

When designing a flight simulator, providing a set of low mass variable-characteristic pilot controls can be very difficult. Thus, a strong incentive exists to identify the highest possible mass that will not degrade the validity of a simulation. The NASA Dryden Flight Research Center has conducted a brief flight program to determine the maximum acceptable mass (system inertia) of an aircraft sidearm controller as a function of force gradient. This information is useful for control system design in aircraft as well as development of suitable flight simulator controls. A modified Learjet with a variable-characteristic sidearm controller was used to obtain data. A boundary was defined between mass considered acceptable and mass considered unacceptable to the pilot. This boundary is defined as a function of force gradient over a range of natural frequencies. This investigation is limited to a study of mass-frequency characteristics only. Results of this investigation are presented in this paper.

Practical controller design for ultra-precision positioning of stages with a pneumatic artificial muscle actuator

NASA Astrophysics Data System (ADS)

Tang, T. F.; Chong, S. H.

2017-06-01

This paper presents a practical controller design method for ultra-precision positioning of pneumatic artificial muscle actuator stages. Pneumatic artificial muscle (PAM) actuators are safe to use and have numerous advantages which have brought these actuators to wide applications. However, PAM exhibits strong non-linear characteristics, and these limitations lead to low controllability and limit its application. In practice, the non-linear characteristics of PAM mechanism are difficult to be precisely modeled, and time consuming to model them accurately. The purpose of the present study is to clarify a practical controller design method that emphasizes a simple design procedure that does not acquire plants parameters modeling, and yet is able to demonstrate ultra-precision positioning performance for a PAM driven stage. The practical control approach adopts continuous motion nominal characteristic trajectory following (CM NCTF) control as the feedback controller. The constructed PAM driven stage is in low damping characteristic and causes severe residual vibration that deteriorates motion accuracy of the system. Therefore, the idea to increase the damping characteristic by having an acceleration feedback compensation to the plant has been proposed. The effectiveness of the proposed controller was verified experimentally and compared with a classical PI controller in point-to-point motion. The experiment results proved that the CM NCTF controller demonstrates better positioning performance in smaller motion error than the PI controller. Overall, the CM NCTF controller has successfully to reduce motion error to 3µm, which is 88.7% smaller than the PI controller.

Relational job characteristics and nurses' affective organizational commitment: the mediating role of work engagement.

PubMed

Santos, Alda; Chambel, Maria José; Castanheira, Filipa

2016-02-01

To study work engagement as a mediator of the associations between relational job characteristics and nurses' affective commitment to the hospital. Earlier research has shown that work engagement mediates the relationship between job resources and affective organizational commitment. However, relational job characteristics, which may be job resources, have not been studied or examined in relation to work engagement and affective organizational commitment in the nursing profession. This study uses a correlational survey design and an online survey for data collection. Data for this correlational study were collected by survey over months (2013) from a sample of 335 hospital nurses. Measures included Portuguese translations of the Relational Job Characteristics' Psychological Effects Scale, the Utrecht Work Engagement Scale and the Affective Organizational Commitment Scale. Data analysis supports a full mediation model where relational job characteristics explained affective commitment to the hospital through nurses' work engagement. Relational job characteristics contribute to nurses' work engagement, which in turn contributes to affective organizational commitment. © 2015 John Wiley & Sons Ltd.

An unmanned probe to Pluto

NASA Technical Reports Server (NTRS)

1990-01-01

Now that Voyager II has completed its grand tour of the solar system, all the planets in the solar system, with the exception of Pluto, have been studied. Even now, missions to return to Mercury, Venus, Mars Jupiter, and Saturn are currently flying or are planned. However, a mission to explore Pluto is not, at the present time, being considered seriously. The design problem presented to the students was very general, i.e., design an unmanned mission to Pluto with a launch window constraint of the years 2000 to 2010. All other characteristics of the mission, such as mission type (flyby, orbiter, lander, penetrator), scientific objectives and payload, and the propulsion system were to be determined by the design teams. The design studies exposed several general problems to be solved. Due to the extreme distance to Pluto (and a corresponding travel time in the range of 10 to 25 years), the spacecraft had to be lighter and more robust than current spacecraft designs. In addition, advanced propulsion concepts had to be considered. These included the new generation of launch vehicles and upper stages and nuclear electric propulsion. The probe design offered an abundance of synthesis and analysis problems. These included sizing trade studies, selection of subsystem components, analysis of spacecraft dynamics, stability and control, structural design and material selection, trajectory design, and selection of scientific equipment. Since the characteristics of the mission, excluding the launch window, were to be determined by the design teams, the solutions varied widely.

Load Transfer Characteristics of Various Designs of Three-Implant-Retained Mandibular Overdentures.

PubMed

Tokar, Emre; Uludag, Bulent

2015-01-01

Many different attachment systems (eg, bars, studs, magnets, telescopic copings) have been used to retain overdentures. The current study aimed to investigate the load transfer characteristics and to compare the stress levels of four attachment designs for mandibular overdentures retained by one central implant and two inclined distal implants. Photoelastic mandibular models fabricated with three screw-type implants (Tapered Screw-Vent, 3.75 × 13 mm) were placed in the parasymphyseal area. The center implant was vertically oriented to the midline, and the other implants were embedded in the canine areas with a 20-degree angulation relative to the center implant. Four overdentures with different attachment designs (bar, bar/ball, bar/distally placed Rk-1s, and Locators) were studied in the context of this model. Vertical loads (100 N) were applied to the central fossa of the right first molar area of each overdenture. Stress levels that developed in the denture-bearing areas and around the implants were observed photoelastically and evaluated visually. The studied attachment designs showed low and moderate stress levels. The greatest stress was found with the bar/ball design, while the lowest stress levels were observed with the Locator attachment design. Stresses were concentrated on the loaded side for each design. All tested designs experienced moderate stress around the posterior edentulous area. None of the designs experienced more than moderate stress. The lowest stress was noted with the Locator attachments, which transmitted little discernible stress around the implants.

The Social Information Processing Model of Task Design: A Review of the Literature.

DTIC Science & Technology

1983-02-01

The Job Characteristics Inventory (JCI) (Sims, Szilagyi , & Keller, 1976) was used as a measure of task characteristics in four studies. Table 2...KD:716:enj 78u452-883 LIST 15 (Continued) 24 June 1981 Dr. H. Wallace Sinaiko Program Director, Manpower Research and Advisory Services Smithsonian

Effects of near soil surface characteristics on soil detachment by overland flow in a natural succession grassland

USDA-ARS?s Scientific Manuscript database

Vegetation restoration probably has great effects on the process of soil detachment. This study was conducted to investigate the effects of near soil surface characteristics on soil detachment by overland flow in a 7-year naturally restored grassland. Four treatments were designed to characterize th...

Heat Stress Alters Ruminal Fermentation and Digesta Characteristics, and Behavior in Lactating Dairy Cattle

USDA-ARS?s Scientific Manuscript database

In a study designed to assess the impact and interaction of nonfiber carbohydrates (NFC) and ruminally degradable protein (RDP) on ruminal characteristics and animal behavior, animals experienced heat stress in the first period (HS), and no/greatly reduced heat stress (NHS) in the second period, all...

Employee Characteristics and Participation in a Worksite Wellness Programme

ERIC Educational Resources Information Center

Joslin, Beth; Lowe, John B.; Peterson, N. Andrew

2006-01-01

Objective: The purpose of this study was to explore the underlying structure of participation in a worksite wellness programme, and to examine the relationship between the demographic and quality of life (QOL) characteristics of employees, and the wellness programme offerings in which they choose to participate. Design: The cross-sectional design…

Predicting Transition to Postsecondary Programs of GED® Earners in a College Setting

ERIC Educational Resources Information Center

Medina, Isabel

2014-01-01

This applied dissertation was designed to identify the characteristics of students enrolled in a GED® preparation program who transitioned to postsecondary programs at the same institution after passing the GED® test. The characteristics studied included age; gender; ethnicity; prematriculation scores in reading, language, and math in the Test of…

Individual, Familial, Friends-Related and Contextual Predictors of Early Sexual Intercourse

ERIC Educational Resources Information Center

Boislard P., Marie-Aude; Poulin, Francois

2011-01-01

This study examined the unique and simultaneous contribution of adolescents' characteristics, parent-child relationship and friends' characteristics on early sexual intercourse, while accounting for family status. A longitudinal multi-sample design was used. The first sample was recruited in a suburban context (n = 265; 62% girls) and the second…

Student Benefits from School Farm Activities as Perceived by Administrators and Instructors.

ERIC Educational Resources Information Center

Williams, David L.; McCarthy, David A.

1985-01-01

Describes a study designed to determine characteristics of school farms operated by vocational agriculture departments in four states, identify how the farms are utilized, identify personal and situational characteristics of school farm teachers and administrators, and identify benefits to students of the school farms as perceived by teachers and…

A Systematic Review and Psychometric Evaluation of Adaptive Behavior Scales and Recommendations for Practice

ERIC Educational Resources Information Center

Floyd, Randy G.; Shands, Elizabeth I.; Alfonso, Vincent C.; Phillips, Jessica F.; Autry, Beth K.; Mosteller, Jessica A.; Skinner, Mary; Irby, Sarah

2015-01-01

Adaptive behavior scales are vital in assessing children and adolescents who experience a range of disabling conditions in school settings. This article presents the results of an evaluation of the design characteristics, norming, scale characteristics, reliability and validity evidence, and bias identification studies supporting 14…

Psychological Characteristics and Entrepreneurial Intention: A Study among University Students in North Borneo, Malaysia

ERIC Educational Resources Information Center

Nasip, Sorayah; Amirul, Sharifah Rahama; Sondoh, Stephen Laison, Jr.; Tanakinjal, Geoffrey Harvey

2017-01-01

Purpose: The purpose of this paper is to investigate the relationship between individual psychological characteristics (i.e. innovativeness, locus of control, self-confidence, propensity to take risk, need for achievement and tolerance for ambiguity) and entrepreneurial intention. Design/methodology/approach: A total of 676 undergraduate students…

Characteristics of Teacher Incentive Pay Programs: A Statewide District Survey

ERIC Educational Resources Information Center

Liang, Guodong; Akiba, Motoko

2015-01-01

Purpose: The purpose of this paper is to examine the characteristics of teacher incentive pay programs used by midsize to large school districts in Missouri. Design/methodology/approach: This study primarily used the Teacher Compensation Programs (TCP) survey data. The TCP survey was developed by the authors to understand the nature and…

Computational Fluid Dynamics (CFD) investigation onto passenger car disk brake design

NASA Astrophysics Data System (ADS)

Munisamy, Kannan M.; Kanasan Moorthy, Shangkari K.

2013-06-01

The aim of this study is to investigate the flow and heat transfer in ventilated disc brakes using Computational Fluid Dynamics (CFD). NACA Series blade is designed for ventilated disc brake and the cooling characteristic is compared to the baseline design. The ventilated disc brakes are simulated using commercial CFD software FLUENTTM using simulation configuration that was obtained from experiment data. The NACA Series blade design shows improvements in Nusselt number compared to baseline design.

The Preliminary Design of a Standardized Spacecraft Bus for Small Tactical Satellites (Volume 1)

DTIC Science & Technology

1996-11-01

characteristics, and not detailed design recommendations, the team decided to avoid modeling the interaction among the objective attributes. 47 5.6 Flexibility of...in the Modsat computer model are necessarily "generic" in nature to provide both flexibility in design evaluation and a foundation on which more...the methods employed during the study, the scope of the problem, the value system used to evaluate alternatives, tradeoff studies performed, modeling

Aerodynamic Characteristics of a 14-Percent-Thick NASA Supercritical Airfoil Designed for a Normal-Force Coefficient of 0.7

NASA Technical Reports Server (NTRS)

Harris, C. D.

1975-01-01

This report documents the experimental aerodynamic characteristics of a 14 percent thick supercritical airfoil based on an off design sonic pressure plateau criterion. The design normal force coefficient was 0.7. The results are compared with those of the family related 10 percent thick supercritical airfoil 33. Comparisons are also made between experimental and theoretical characteristics and composite drag rise characteristics derived for a full scale Reynolds number of 40 million.

Characteristics of manipulative in mathematics laboratory

NASA Astrophysics Data System (ADS)

Istiandaru, A.; Istihapsari, V.; Prahmana, R. C. I.; Setyawan, F.; Hendroanto, A.

2017-12-01

A manipulative is a teaching aid designed such that students could understand mathematical concepts by manipulating it. This article aims to provide an insight to the characteristics of manipulatives produced in the mathematics laboratory of Universitas Ahmad Dahlan, Indonesia. A case study was conducted to observe the existing manipulatives produced during the latest three years and classified the manipulatives based on the characteristics found. There are four kinds of manipulatives: constructivism manipulative, virtual manipulative, informative manipulative, and game-based manipulative. Each kinds of manipulative has different characteristics and impact towards the mathematics learning.

Special Programs in Medical Library Education, 1957-1971: Part I: Definition of the Problem and Research Design *

PubMed Central

Roper, Fred W.

1973-01-01

This report discusses the background and design of a study on special programs of education for medical librarianship in the United States. Between 1957 and 1971, 238 persons completed special programs in medical librarianship. Since little information has been available concerning the occupational success of these individuals, the study was undertaken (1) to determine the nature and distinguishing characteristics of the special programs of education for medical librarianship in the United States and (2) to provide some quantitative evidence of the value of those programs by studying a group of professional medical librarians who have had specialized training and a group of practicing medical librarians who have not had specialized training and comparing and correlating the data with regard to selected characteristics. The findings of the study will be presented in three future reports: (1) a descriptive analysis of the programs; (2) a description of the characteristics of all former trainees in medical librarianship who responded to a questionnaire and a discussion of their reactions to their training programs; and (3) a comparison, based on selected characteristics, of a group of former trainees who are currently employed in medical libraries with a group of medical librarians who did not go through special training programs. PMID:4702806

Design and Testing of a One-Third Scale Soyuz TM Descent Module Spartan Conversion Project Super Loki Instrumentation

NASA Technical Reports Server (NTRS)

Anderson, Loren A.; Armitage, Pamela Kay

1993-01-01

The 1992-1993 senior Aerospace Engineering Design class continued work on the post landing configurations for the Assured Crew Return Vehicle. The Assured Crew Return Vehicle will be permanently docked to the space station fulfilling NASA's commitment of Assured Crew Return Capability in the event of an accident or illness aboard the space station. The objective of the project was to give the Assured Crew Return Vehicle Project Office data to feed into their feasibility studies. Three design teams were given the task of developing models with dynamically and geometrically scaled characteristics. Groups one and two combined efforts to design a one-third scale model of the Russian Soyuz TM Descent Module, and an on-board flotation system. This model was designed to determine the flotation characteristics and test the effects of a rigid flotation and orientation system. Group three designed a portable water wave test facility to be located on campus. Because of additional funding from Thiokol Corporation, testing of the Soyuz model and flotation systems took place at the Offshore Technology Research Center. Universities Space Research Association has been studying the use of small expendable launch vehicles for missions which cost less than 200 million dollars. The Crusader2B. which consists of the original Spartan first and second stage with an additional Spartan second stage and the Minuteman III upper stage is being considered for this task. University of Central Florida project accomplishments include an analysis of launch techniques, a modeling technique to determine flight characteristics, and input into the redesign of an existing mobile rail launch platform.

Some design considerations for solar-powered aircraft

NASA Technical Reports Server (NTRS)

Phillips, W. H.

1980-01-01

Performance and operating characteristics are presented for a solar powered aircraft intended to remain aloft for long periods. The critical technologies which limit the performance are identified. By using the techniques presented, the effects of variation in the system parameters are studied. Practical design consideration are discussed.

Designing Multimedia Games for Young Children's Taxonomic Concept Development

ERIC Educational Resources Information Center

Sung, Yao-Ting; Chang, Kuo-En; Lee, Meng-Da

2008-01-01

This study aimed to design and evaluate multimedia games which were based on the theories of children's development of taxonomic concepts. Factors that might affect children's classification skills, such as use of single physical characteristics of objects, competition between thematic and taxonomic relationships, difficulty in forming…

Analysis of DMFC/battery hybrid power system for portable applications

NASA Astrophysics Data System (ADS)

Lee, Bong-Do; Jung, Doo-Hwan; Ko, Young-Ho

This study was carried out to develop a direct methanol fuel cell (DMFC)/battery hybrid power system used in portable applications. For a portable power system, the DMFC was applied for the main power source at average load and the battery was applied for auxiliary power at overload. Load share characteristics of hybrid power source were analyzed by computational simulation. The connection apparatus between the DMFC and the battery was set and investigated in the real system. Voltages and currents of the load, the battery and the DMFC were measured according to fuel, air and load changes. The relationship between load share characteristic and battery capacity was surveyed. The relationship was also studied in abnormal operation. A DMFC stack was manufactured for this experiment. For the study of the connection characteristics to the fuel cell Pb-acid, Ni-Cd and Ni-MH batteries were tested. The results of this study can be applied to design the interface module of the fuel cell/battery hybrid system and to determine the design requirement in the fuel cell stack for portable applications.

Consumers' perception of organic product characteristics. A review.

PubMed

Schleenbecker, Rosa; Hamm, Ulrich

2013-12-01

Consumer interest in organic products is growing alongside a diversification of the supply. In order to serve consumers actual needs and wants regarding organic products, those involved in the market need to be informed about consumers' perception of organic products. Therefore, the state of research as regards consumers' perception of organic product characteristics, including basic and additional characteristics, product labelling, product innovations and the range of products on the market is displayed in this contribution. A comprehensive literature analysis was performed uncovering not only the state of the art in the field including employed methodology, but also research needs. Most studies are published on consumers' perception of organic products' design and labelling. A trend towards the so called 'organic-plus' positioning can be perceived, with many consumers expecting an extensive orientation towards sustainability. The diversity of product labels features prominently in related studies. The demand for reliable information, as well as the low degree of awareness of many labels amongst consumers becomes clear in these studies. To date, few results are available on consumers' perception of packaging and design of organic products, and even fewer for consumers' perception of range design. Both consumers' perception of organic product innovation and valued added services are untouched so far. Copyright © 2013 Elsevier Ltd. All rights reserved.

Helicobacter pylori and Cancer

MedlinePlus

... alpha-tocopherol, beta-carotene lung cancer prevention study: Design, methods, participant characteristics, and compliance. The ATBC Cancer Prevention Study Group. Annals of Epidemiology 1994; 4(1):1–10. [PubMed Abstract] Kamangar F, Dawsey ...

Multidisciplinary design optimization of aircraft wing structures with aeroelastic and aeroservoelastic constraints

NASA Astrophysics Data System (ADS)

Jung, Sang-Young

Design procedures for aircraft wing structures with control surfaces are presented using multidisciplinary design optimization. Several disciplines such as stress analysis, structural vibration, aerodynamics, and controls are considered simultaneously and combined for design optimization. Vibration data and aerodynamic data including those in the transonic regime are calculated by existing codes. Flutter analyses are performed using those data. A flutter suppression method is studied using control laws in the closed-loop flutter equation. For the design optimization, optimization techniques such as approximation, design variable linking, temporary constraint deletion, and optimality criteria are used. Sensitivity derivatives of stresses and displacements for static loads, natural frequency, flutter characteristics, and control characteristics with respect to design variables are calculated for an approximate optimization. The objective function is the structural weight. The design variables are the section properties of the structural elements and the control gain factors. Existing multidisciplinary optimization codes (ASTROS* and MSC/NASTRAN) are used to perform single and multiple constraint optimizations of fully built up finite element wing structures. Three benchmark wing models are developed and/or modified for this purpose. The models are tested extensively.

Performance of a Turboprop Engine with Heat Recovery in Off-Design Conditions

NASA Astrophysics Data System (ADS)

Andriani, Roberto; Ghezzi, Umberto; Gamma, Fausto; Ingenito, Antonella; Agresta, Antonio

2013-09-01

The research for fuel consumption and pollution reduction in new generation aero engines has indicated intercooling and regeneration as very effective methods for this purpose. Hence, different countries have joined their efforts in common research programs, to develop new gas turbine engines able to reduce considerably the fuel consumption and the ambient impact by means of these two techniques. To study their effects on the engine performance and characteristics, a thermodynamic numerical program that simulates the behavior of a turboprop engine with intercooling and regeneration in different operating conditions has been developed. After the parametric study, and the definition of the design conditions, the off-design analysis is carried on, comparing the main characteristics of the intercooled-regenerated turboprop with those of a conventional engine. Then, once a particular mission profile was fixed, the engine performance, in particular the equivalent power, the fuel consumption and the heat exchanger weight were discussed.

A comparative study of restricted randomization procedures for multiarm trials with equal or unequal treatment allocation ratios.

PubMed

Ryeznik, Yevgen; Sverdlov, Oleksandr

2018-06-04

Randomization designs for multiarm clinical trials are increasingly used in practice, especially in phase II dose-ranging studies. Many new methods have been proposed in the literature; however, there is lack of systematic, head-to-head comparison of the competing designs. In this paper, we systematically investigate statistical properties of various restricted randomization procedures for multiarm trials with fixed and possibly unequal allocation ratios. The design operating characteristics include measures of allocation balance, randomness of treatment assignments, variations in the allocation ratio, and statistical characteristics such as type I error rate and power. The results from the current paper should help clinical investigators select an appropriate randomization procedure for their clinical trial. We also provide a web-based R shiny application that can be used to reproduce all results in this paper and run simulations under additional user-defined experimental scenarios. Copyright © 2018 John Wiley & Sons, Ltd.

Results of design studies and wind tunnel tests of high-aspect-ratio supercritical wings for an energy efficient transport

NASA Technical Reports Server (NTRS)

Steckel, D. K.; Dahlin, J. A.; Henne, P. A.

1980-01-01

These basic characteristics of critical wings included wing area, aspect ratio, average thickness, and sweep as well as practical constraints on the planform and thickness near the wing root to allow for the landing gear. Within these constraints, a large matrix of wing designs was studied with spanwise variations in the types of airfoils and distribution of lift as well as some small planform changes. The criteria by which the five candidate wings were chosen for testing were the cruise and buffet characteristics in the transonic regime and the compatibility of the design with low speed (high-lift) requirements. Five wing-wide-body configurations were tested in the NASA Ames 11-foot transonic wind tunnel. Nacelles and pylons, flap support fairings, tail surfaces, and an outboard aileron were also tested on selected configurations.

Modeling initiation trains based on HMX and TATB

NASA Astrophysics Data System (ADS)

Drake, R. C.; Maisey, M.

2017-01-01

There will always be a requirement to reduce the size of initiation trains. However, as the size is reduced the performance characteristics can be compromised. A detailed science-based understanding of the processes (ignition and growth to detonation) which determine the performance characteristics is required to enable compact and robust initiation trains to be designed. To assess the use of numerical models in the design of initiation trains a modeling study has been undertaken, with the aim of understanding the initiation of TATB and HMX charges by a confined, surface mounted detonator. The effect of detonator diameter and detonator confinement on the formation of dead zones in the acceptor explosives has been studied. The size of dead zones can be reduced by increasing the diameter of the detonator and by increasing the impedance of the confinement. The implications for the design of initiation trains are discussed.

Innovation in Aerodynamic Design Features of Soviet Missiles

NASA Technical Reports Server (NTRS)

Spearman, M. Leroy

2006-01-01

Wind tunnel investigations of some tactical and strategic missile systems developed by the former Soviet Union have been included in the basic missile research programs of the NACA/NASA. Studies of the Soviet missiles sometimes revealed innovative design features that resulted in unusual or unexpected aerodynamic characteristics. In some cases these characteristics have been such that the measured performance of the missile exceeds what might have been predicted. In other cases some unusual design features have been found that would alleviate what might otherwise have been a serious aerodynamic problem. In some designs, what has appeared to be a lack of refinement has proven to be a matter of expediency. It is a purpose of this paper to describe some examples of unusual design features of some Soviet missiles and to illustrate the effectiveness of the design features on the aerodynamic behavior of the missile. The paper draws on the experience of the author who for over 60 years was involved in the aerodynamic wind tunnel testing of aircraft and missiles with the NACA/NASA.

An analysis of characteristics of post-authorisation studies registered on the ENCePP EU PAS Register

PubMed Central

Carroll, Robert; Ramagopalan, Sreeram V.; Cid-Ruzafa, Javier; Lambrelli, Dimitra; McDonald, Laura

2017-01-01

Background: The objective of this study was to investigate the study design characteristics of Post-Authorisation Studies (PAS) requested by the European Medicines Agency which were recorded on the European Union (EU) PAS Register held by the European Network of Centres for Pharmacoepidemiology and Pharmacovigilance (ENCePP). Methods: We undertook a cross-sectional descriptive analysis of all studies registered on the EU PAS Register as of 18 th October 2016. Results: We identified a total of 314 studies on the EU PAS Register, including 81 (26%) finalised, 160 (51%) ongoing and 73 (23%) planned. Of those studies identified, 205 (65%) included risk assessment in their scope, 133 (42%) included drug utilisation and 94 (30%) included effectiveness evaluation. Just over half of the studies (175; 56%) used primary data capture, 135 (43%) used secondary data and 4 (1%) used a hybrid design combining both approaches. Risk assessment and effectiveness studies were more likely to use primary data capture (60% and 85% respectively as compared to 39% and 14% respectively for secondary). The converse was true for drug utilisation studies where 59% were secondary vs. 39% for primary. For type 2 diabetes mellitus, database studies were more commonly used (80% vs 3% chart review, 3% hybrid and 13% primary data capture study designs) whereas for studies in oncology, primary data capture were more likely to be used (85% vs 4% chart review, and 11% database study designs). Conclusions: Results of this analysis show that PAS design varies according to study objectives and therapeutic area. PMID:29188016

Icing-Protection Requirements for Reciprocating-Engine Induction System

NASA Technical Reports Server (NTRS)

Coles, Willard D; Rollin, Vern G; Mulholland, Donald R

1950-01-01

Despite the development of relatively ice-free fuel-metering systems, the widespread use of alternate and heated-air intakes, and the use of alcohol for emergency de-icing, icing of aircraft-engine induction systems is a serious problem. Investigations have been made to study and to combat all phases of this icing problem. From these investigations, criterions for safe operation and for design of new induction systems have been established. The results were obtained from laboratory investigations of carburetor-supercharger combinations, wind-tunnel investigations of air scoops, multicylinder-engine studies, and flight investigations. Characteristics of three forms of ice, impact, throttling, and fuel evaporation were studied. The effects of several factors on the icing characteristics were also studied and included: (1) atmospheric conditions, (2) engine and air-scoop configurations, including light-airplane system, (3) type fuel used, and (4) operating variables, such as power condition, use of a manifold pressure regulator, mixture setting, carburetor heat, and water-alcohol injection. In addition, ice-detection methods were investigated and methods of preventing and removing induction-system ice were studied. Recommendations are given for design and operation with regard to induction-system design.

Preliminary design of a mini-Brayton Compressor-Alternator-Turbine (CAT)

NASA Technical Reports Server (NTRS)

1973-01-01

The preliminary design of a mini-Brayton compressor-alternator-turbine system is discussed. The program design goals are listed. The optimum system characteristics over the entire range of power output were determined by performing a wide-range parametric study. The ability to develop the required components to the degree necessary within the limitations of present technology is evaluated. The sensitivity of the system to various individual design parameters was analyzed.

Block 2 SRM conceptual design studies. Volume 1, Book 1: Conceptual design package

NASA Technical Reports Server (NTRS)

Smith, Brad; Williams, Neal; Miller, John; Ralston, Joe; Richardson, Jennifer; Moore, Walt; Doll, Dan; Maughan, Jeff; Hayes, Fred

1986-01-01

The conceptual design studies of a Block 2 Solid Rocket Motor (SRM) require the elimination of asbestos-filled insulation and was open to alternate designs, such as case changes, different propellants, modified burn rate - to improve reliability and performance. Limitations were placed on SRM changes such that the outside geometry should not impact the physical interfaces with other Space Shuttle elements and should have minimum changes to the aerodynamic and dynamic characteristics of the Space Shuttle vehicle. Previous Space Shuttle SRM experience was assessed and new design concepts combined to define a valid approach to assured flight success and economic operation of the STS. Trade studies, preliminary designs, analyses, plans, and cost estimates are documented.

The Parametric Study and Fine-Tuning of Bow-Tie Slot Antenna with Loaded Stub

PubMed Central

2017-01-01

A printed Bow-Tie slot antenna with loaded stub is proposed and the effects of changing the dimensions of the slot area, the stub and load sizes are considered in this paper. These parameters have a considerable effect on the antenna characteristics as well as its performance. An in-depth parametric study of these dimensions is presented. This paper proposes the necessary conditions for initial approximation of dimensions needed to design this antenna. In order to achieve the desired performance of the antenna fine tuning of all sizes of these parameters is required. The parametric studies used in this paper provide proper trends for initiation and tuning the design. A prototype of the antenna for 1.7GHz to 2.6GHz band is fabricated. Measurements conducted verify that the designed antenna has wideband characteristics with 50% bandwidth around the center frequency of 2.1GHz. Conducted measurements for reflection coefficient (S11) and radiation pattern also validate our simulation results. PMID:28114354

The Parametric Study and Fine-Tuning of Bow-Tie Slot Antenna with Loaded Stub.

PubMed

Shafiei, M M; Moghavvemi, Mahmoud; Wan Mahadi, Wan Nor Liza

2017-01-01

A printed Bow-Tie slot antenna with loaded stub is proposed and the effects of changing the dimensions of the slot area, the stub and load sizes are considered in this paper. These parameters have a considerable effect on the antenna characteristics as well as its performance. An in-depth parametric study of these dimensions is presented. This paper proposes the necessary conditions for initial approximation of dimensions needed to design this antenna. In order to achieve the desired performance of the antenna fine tuning of all sizes of these parameters is required. The parametric studies used in this paper provide proper trends for initiation and tuning the design. A prototype of the antenna for 1.7GHz to 2.6GHz band is fabricated. Measurements conducted verify that the designed antenna has wideband characteristics with 50% bandwidth around the center frequency of 2.1GHz. Conducted measurements for reflection coefficient (S11) and radiation pattern also validate our simulation results.

Material and cooling requirements for poly-Bitter resistive magnets and hybrid inserts generating continuous fields up to 50 T

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, B.J.; Bird, M.D.; Eyssa, Y.M.

1994-07-01

The new National High Magnetic Field Laboratory (NHMFL), equipped with a 40 MW DC power supply, will design and construct the next generation of high field resistive magnets and hybrid inserts generating DC fields up to 50 T. The authors present a study on the required materials and the necessary cooling characteristics, these magnets need. The configuration selected for this study consists of a combination of thin poly-Bitter and thick Bitter coils optimized in dimensions and power under constraint of maximum design stress and heat removal to obtain maximum field. The study shows that each design requires a different optimummore » ratio of conductor strength to electrical conductivity and that efficient cooling is only advantageous if strong copper alloys are used. For efficient use of the available power the development of new high strength, high conductivity materials will be necessary. Equally important are improvements in the heat transfer characteristics of these high power density magnets.« less

Economics of PPP-insulated pipe-type cable: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ernst, A.

1987-10-01

This study has been designed to establish the economic range of application and the potential cost advantage of PPP-insulated pipe-type cable compared with presently utilized paper-insulated designs. The study is in two parts. In the first part the electrical and thermal characteristics of a range of cable sizes are tabulated. This data can be utilized for planning and economic comparison purposes. In the second part 12 transmission load scenarios are studied to determine the relative cost of various designs considering materials, installation and the losses over a wide range of assumptions.

Development and Efficacy Testing of a Social Network-Based Competitive Application for Weight Loss.

PubMed

Lee, Jisan; Kim, Jeongeun

2016-05-01

Although a lot of people continuously try to lose weight, the obesity rate has remained high: 36.9% of males and 38.0% of females worldwide in 2013. This suggests the need for a new intervention. In this study, we designed a smartphone application, With U, to aid weight loss by using an offline social network of friends and an online social network, Facebook. To determine the effects of With U, this study was designed as a one-group pretest-posttest design. Overweight, obese, and severely obese adults 20-40 years old, along with their friends, participated in this study. A total of 10 pairs attempted to lose weight for 4 weeks. We used a questionnaire to measure general characteristics, motivation, and intent to continue to use With U, and the Inbody720 (Biospace, Seoul, Republic of Korea) body composition analyzer was used to measure physical characteristics. In addition, we briefly interviewed the participants about their experience. We observed statistically significant effects in terms of motivation to lose weight and the amount of weight loss. Changes in physical characteristics beyond weight loss also showed positive trends. Also, we discovered some interesting facts during the interviews. The weight loss effect was greater when the team members met more and the relationship between the challengers was more direct and intimate. The application With U, designed and developed to allow friends to challenge each other to lose weight, affected both motivation to lose weight and the amount of weight loss. In the future, effects of smartphone applications for health management with social networks need to be studied further.

Nonmedical influences on medical decision making: an experimental technique using videotapes, factorial design, and survey sampling.

PubMed Central

Feldman, H A; McKinlay, J B; Potter, D A; Freund, K M; Burns, R B; Moskowitz, M A; Kasten, L E

1997-01-01

OBJECTIVE: To study nonmedical influences on the doctor-patient interaction. A technique using simulated patients and "real" doctors is described. DATA SOURCES: A random sample of physicians, stratified on such characteristics as demographics, specialty, or experience, and selected from commercial and professional listings. STUDY DESIGN: A medical appointment is depicted on videotape by professional actors. The patient's presenting complaint (e.g., chest pain) allows a range of valid interpretation. Several alternative versions are taped, featuring the same script with patient-actors of different age, sex, race, or other characteristics. Fractional factorial design is used to select a balanced subset of patient characteristics, reducing costs without biasing the outcome. DATA COLLECTION: Each physician is shown one version of the videotape appointment and is asked to describe how he or she would diagnose or treat such a patient. PRINCIPAL FINDINGS: Two studies using this technique have been completed to date, one involving chest pain and dyspnea and the other involving breast cancer. The factorial design provided sufficient power, despite limited sample size, to demonstrate with statistical significance various influences of the experimental and stratification variables, including the patient's gender and age and the physician's experience. Persistent recruitment produced a high response rate, minimizing selection bias and enhancing validity. CONCLUSION: These techniques permit us to determine, with a degree of control unattainable in observational studies, whether medical decisions as described by actual physicians and drawn from a demographic or professional group of interest, are influenced by a prescribed set of nonmedical factors. PMID:9240285

Study of power-to-weight ratio of the electrothermal propulsion system of nanosatellite maneuvering satellite platform

NASA Astrophysics Data System (ADS)

Blinov, V. N.; Vavilov, I. S.; Kositsin, V. V.; Lukyanchik, A. I.; Ruban, V. I.; Shalay, V. V.

2018-01-01

The direction of the solution of the actual task of maneuvering satellite platforms (MSP) design for nanosatellite weighing up to 10 kg, power-to-weight ratio of PS up to 8 W (electrothermal micro engine (ETME) 5 W, vaporizer 2 W, electrovalve up to 1 W) and with characteristic velocity up to 60 m/s were considered on the basis of studies of the propulsion system(PS) with ETME. The aim of study is the confirmation of technical possibility of nanosatellites design with mass up to 10 kg, power-to-weight ratio up to 8 W and with characteristic velocity up to 60 m/s on the basis of PS prototype experimental studies. In the course of the research tasks were solved to determine the design of PS and ETME of nanosatellit’s MSP, determine the electric parameters of PS depending on power consumption that determining specific impulse of ETME, and estimate the implemented characteristic velocity of the nanosatellite. The PS constructive scheme of nanosatellite mass of 10 kg was design, PS experimental prototype was produced and PS experimental research on ammonia were conducted. The 200°C was reached per 900 s at 5 W ETME power consumption with nitrogen, that equivalent to specific impulse of ammonia ETME 124/136 s when entering the stationary mode. 2 W energy consumption of a two-thread liquid ammonia vaporizer is experimentally substantiated. The using of electrovelve stepped control cyclogram allowed to reduce the average power consumption to 1 W.

Data quality and feasibility of the Experience Sampling Method across the spectrum of severe psychiatric disorders: a protocol for a systematic review and meta-analysis.

PubMed

Vachon, Hugo; Rintala, Aki; Viechtbauer, Wolfgang; Myin-Germeys, Inez

2018-01-18

Due to a number of methodological advantages and theoretical considerations, more and more studies in clinical psychology research employ the Experience Sampling Method (ESM) as a data collection technique. Despite this growing interest, the absence of methodological guidelines related to the use of ESM has resulted in a large heterogeneity of designs while the potential effects of the design itself on the response behavior of the participants remain unknown. The objectives of this systematic review are to investigate the associations between the design characteristics and the data quality and feasibility of studies relying on ESM in severe psychiatric disorders. We will search for all published studies using ambulatory assessment with patients suffering from major depressive disorder, bipolar disorder, and psychotic disorder or individuals at high risk for these disorders. Electronic database searches will be performed in PubMed and Web of Science with no restriction on the publication date. Two reviewers will independently screen original studies in a title/abstract phase and a full-text phase based on the inclusion criteria. The information related to the design and sample characteristics, data quality, and feasibility will be extracted. We will provide results in terms of a descriptive synthesis, and when applicable, a meta-analysis of the findings will be conducted. Our results will attempt to highlight how the feasibility and data quality of ambulatory assessment might be related to the methodological characteristics of the study designs in severe psychiatric disorders. We will discuss these associations in different subsamples if sufficient data are available and will examine limitations in the reporting of the methods of ambulatory studies in the current literature. The protocol for this systematic review was registered on PROSPERO (PROSPERO 2017: CRD42017060322 ) and is available in full on the University of York website ( http://www.crd.york.ac.uk/PROSPERO/display_record.asp?ID=CRD42017060322 ).

Microemulsion formulation design and evaluation for hydrophobic compound: Catechin topical application.

PubMed

Lin, Yu-Hsiang; Tsai, Ming-Jun; Fang, Yi-Ping; Fu, Yaw-Syan; Huang, Yaw-Bin; Wu, Pao-Chu

2018-01-01

The aim of the present study was to design a microemulsion for catechin topical application. A mixture experimental design with five independent variables (X 1 : oil, X 2 : surfactant, X 3 : catechin, X 4 : cosurfactant and X 5 : water) was developed, and the response surface methodology was used to study the effect of formulation components on physiochemical characteristics and penetration capacity of a catechin-loaded microemulsion, and to obtain an optimal microemulsion formulation. The results showed that the drug-loaded microemulsion formation and characteristics were related to many parameters of the components. The transdermal amounts in receiver cells and skin deposition amount remarkably increased about 4.1-111.6-fold and 0.6-7.6-fold respectively. The lag time was significantly shortened from 10h to 1.0-6.7h. The optimal formulation with 20% surfactant, 30% cosurfactant and 2.6% Catechin was subjected to stability and irritation tests. The results showed that the physicochemical characteristics and catechin level of the drug-loaded microemulsion did not show significant degradation after 3 months of storage at 25°C.The catechin-loaded microemulsion did not cause significant irritation compared to the water-treated group. Copyright © 2017 Elsevier B.V. All rights reserved.

Characteristics of a global classification system for perinatal deaths: a Delphi consensus study.

PubMed

Wojcieszek, Aleena M; Reinebrant, Hanna E; Leisher, Susannah Hopkins; Allanson, Emma; Coory, Michael; Erwich, Jan Jaap; Frøen, J Frederik; Gardosi, Jason; Gordijn, Sanne; Gulmezoglu, Metin; Heazell, Alexander E P; Korteweg, Fleurisca J; McClure, Elizabeth; Pattinson, Robert; Silver, Robert M; Smith, Gordon; Teoh, Zheyi; Tunçalp, Özge; Flenady, Vicki

2016-08-15

Despite the global burden of perinatal deaths, there is currently no single, globally-acceptable classification system for perinatal deaths. Instead, multiple, disparate systems are in use world-wide. This inconsistency hinders accurate estimates of causes of death and impedes effective prevention strategies. The World Health Organisation (WHO) is developing a globally-acceptable classification approach for perinatal deaths. To inform this work, we sought to establish a consensus on the important characteristics of such a system. A group of international experts in the classification of perinatal deaths were identified and invited to join an expert panel to develop a list of important characteristics of a quality global classification system for perinatal death. A Delphi consensus methodology was used to reach agreement. Three rounds of consultation were undertaken using a purpose built on-line survey. Round one sought suggested characteristics for subsequent scoring and selection in rounds two and three. The panel of experts agreed on a total of 17 important characteristics for a globally-acceptable perinatal death classification system. Of these, 10 relate to the structural design of the system and 7 relate to the functional aspects and use of the system. This study serves as formative work towards the development of a globally-acceptable approach for the classification of the causes of perinatal deaths. The list of functional and structural characteristics identified should be taken into consideration when designing and developing such a system.

Gallium arsenide solar array subsystem study

NASA Technical Reports Server (NTRS)

Miller, F. Q.

1982-01-01

The effects on life cycle costs of a number of technology areas are examined for a gallium arsenide space solar array. Four specific configurations were addressed: (1) a 250 KWe LEO mission - planer array; (2) a 250 KWe LEO mission - with concentration; (3) a 50 KWe GEO mission planer array; (4) a 50 KWe GEO mission - with concentration. For each configuration, a baseline system conceptual design was developed and the life cycle costs estimated in detail. The baseline system requirements and design technologies were then varied and their relationships to life cycle costs quantified. For example, the thermal characteristics of the baseline design are determined by the array materials and masses. The thermal characteristics in turn determine configuration, performance, and hence life cycle costs.

Research trends in studies of medical students’ characteristics: a scoping review

PubMed Central

2017-01-01

The purpose of this study is to investigate domestic and international research trends in studies of medical students’ characteristics by using the scoping review methods. This study adopted the scoping review to assess papers on the characteristics of medical students. The procedure of research was carried out according to the five steps of the scoping review. The full texts of 100 papers are obtained and are read closely, after which suitable 88 papers are extracted by us for this research. The review is mapped by the year of the study, source, location, author, research design, research subject, objective, and key results. The frequency is analyzed by using Microsoft Excel and SPSS. We found 70 papers (79.5%) on a single medical school, 15 (17.0%) on multiple medical schools, and three (3.4%) on mixed schools, including medical and nonmedical schools. Sixty-nine (79.5%) were cross-sectional studies and 18 (20.5%) were longitudinal studies. Eighty-two papers (93.2%) adopted questionnaire surveys. We summarized research trends of studies on medical students in Korea and overseas by topic, and mapped them into physical health, mental health, psychological characteristics, cognitive characteristics, social characteristics, and career. This study provides insights into the future directions of research for the characteristics of medical students. PMID:28870017

Research trends in studies of medical students' characteristics: a scoping review.

PubMed

Jung, Sung Soo; Park, Kwi Hwa; Roh, HyeRin; Yune, So Jung; Lee, Geon Ho; Chun, Kyunghee

2017-09-01

The purpose of this study is to investigate domestic and international research trends in studies of medical students' characteristics by using the scoping review methods. This study adopted the scoping review to assess papers on the characteristics of medical students. The procedure of research was carried out according to the five steps of the scoping review. The full texts of 100 papers are obtained and are read closely, after which suitable 88 papers are extracted by us for this research. The review is mapped by the year of the study, source, location, author, research design, research subject, objective, and key results. The frequency is analyzed by using Microsoft Excel and SPSS. We found 70 papers (79.5%) on a single medical school, 15 (17.0%) on multiple medical schools, and three (3.4%) on mixed schools, including medical and nonmedical schools. Sixty-nine (79.5%) were cross-sectional studies and 18 (20.5%) were longitudinal studies. Eighty-two papers (93.2%) adopted questionnaire surveys. We summarized research trends of studies on medical students in Korea and overseas by topic, and mapped them into physical health, mental health, psychological characteristics, cognitive characteristics, social characteristics, and career. This study provides insights into the future directions of research for the characteristics of medical students.

Factors Affecting the Acceptability of Microforms as a Reading Medium.

ERIC Educational Resources Information Center

Spencer, Herbert; Reynolds, Linda

Based on visits to representative microform users and an extensive survey of relevant literature, a study was undertaken to assess the relative importance of factors affecting the acceptability of microforms as reading mediums. The following variables were considered: (1) microform characteristics; (2) equipment design; (3) work station design;…

Software Partitioning Schemes for Advanced Simulation Computer Systems. Final Report.

ERIC Educational Resources Information Center

Clymer, S. J.

Conducted to design software partitioning techniques for use by the Air Force to partition a large flight simulator program for optimal execution on alternative configurations, this study resulted in a mathematical model which defines characteristics for an optimal partition, and a manually demonstrated partitioning algorithm design which…

Acoustic attenuation design requirements established through EPNL parametric trades

NASA Technical Reports Server (NTRS)

Veldman, H. F.

1972-01-01

An optimization procedure for the provision of an acoustic lining configuration that is balanced with respect to engine performance losses and lining attenuation characteristics was established using a method which determined acoustic attenuation design requirements through parametric trade studies using the subjective noise unit of effective perceived noise level (EPNL).

A qualitative study on physicians' perceptions of specialty characteristics.

PubMed

Park, Kwi Hwa; Jun, Soo-Koung; Park, Ie Byung

2016-09-01

There has been limited research on physicians' perceptions of the specialty characteristics that are needed to sustain a successful career in medical specialties in Korea. Medical Specialty Preference Inventory in the United States or SCI59 (specialty choice inventory) in the United Kingdom are implemented to help medical students plan their careers. The purpose of this study was to explore the characteristics of the major specialties in Korea. Twelve physicians from different specialties participated in an exploratory study consisting of qualitative interviews about the personal ability and emotional characteristics and job attributes of each specialty. The collected data were analysed with content analysis methods. Twelve codes were extracted for ability & skill attributes, 23 codes for emotion & attitude attributes, and 12 codes for job attributes. Each specialty shows a different profile in terms of its characteristic attributes. The findings have implications for the design of career planning programs for medical students.

Effects of age and body mass index on breast characteristics: A cluster analysis.

PubMed

Coltman, Celeste E; Steele, Julie R; McGhee, Deirdre E

2018-05-24

Limited research has quantified variation in the characteristics of the breasts among women and determined how these breast characteristics are influenced by age and body mass. The aim of this study was to classify the breasts of women in the community into different categories based on comprehensive and objective measurements of the characteristics of their breasts and torsos, and to determine the effect of age and body mass index (BMI) on the prevalence of these breast categories. Four breast characteristic clusters were identified (X-Large, Very-ptotic & Splayed; Large, Ptotic & Splayed; Medium & Mildly-ptotic; and Small & Non-ptotic), with age and BMI shown to significantly affect the breast characteristic clusters. These results highlight the difference in breast characteristics exhibited among women and how these clusters are affected by age and BMI. The breast characteristic clusters identified in this study could be used as a basis for future bra designs and sizing systems in order to improve bra fit for women.

A multilevel study on the relationships between work characteristics, self-efficacy, collective efficacy, and organizational citizenship behavior: the case of Taiwanese police duty-executing organizations.

PubMed

Chen, Chun-Hsi Vivian; Kao, Rui-Hsin

2011-01-01

Public security, traffic management, and service for the people are the 3 major functions of policing in Taiwan. This definition encompasses not only the traditional job characteristics, but also the level of contextual characteristics and social characteristics because of police work's characteristics and its frequent interaction with the public. Thus, the present study conducted a multilevel model analysis by taking self-efficacy and collective efficacy as the mediating variables. The purpose was to investigate the influences of motivational work characteristics (knowledge-oriented) and social work characteristics (socially and contextually oriented) of work-design model on the police officers' organizational citizenship behavior (OCB), by using first-line police officers in Taiwan as the research objects. The study showed not only that knowledge characteristics will influence the self-efficacy of a police officer and that self-efficacy can in turn influence individual police officers' OCB, but also the contextual effect of social characteristics, contextual characteristics, and collective efficacy on self-efficacy and individuals' OCB. Additionally, there was a crosslevel moderating effect from contextual characteristics on the relationship between knowledge characteristics and self-efficacy and the relationship between self-efficacy and the individuals' OCB. The authors conclude the article with research implications.

Medication safety research by observational study design.

PubMed

Lao, Kim S J; Chui, Celine S L; Man, Kenneth K C; Lau, Wallis C Y; Chan, Esther W; Wong, Ian C K

2016-06-01

Observational studies have been recognised to be essential for investigating the safety profile of medications. Numerous observational studies have been conducted on the platform of large population databases, which provide adequate sample size and follow-up length to detect infrequent and/or delayed clinical outcomes. Cohort and case-control are well-accepted traditional methodologies for hypothesis testing, while within-individual study designs are developing and evolving, addressing previous known methodological limitations to reduce confounding and bias. Respective examples of observational studies of different study designs using medical databases are shown. Methodology characteristics, study assumptions, strengths and weaknesses of each method are discussed in this review.

The Effects of an Instructional Method on Adult Learners' Perceptions of Self-Efficacy: A Quantitative Study

ERIC Educational Resources Information Center

Croasmun, James T.

2010-01-01

The adult student undergraduate population is growing at the fastest rate on campuses in the United States and many undergraduates are still developing adult learning characteristics. Historically, college courses are generally not designed to meet the needs of adult learner or foster adult learning characteristics in developing adult learners. Is…

Modeling the fundamental characteristics and processes of the spacecraft functioning

NASA Technical Reports Server (NTRS)

Bazhenov, V. I.; Osin, M. I.; Zakharov, Y. V.

1986-01-01

The fundamental aspects of modeling of spacecraft characteristics by using computing means are considered. Particular attention is devoted to the design studies, the description of physical appearance of the spacecraft, and simulated modeling of spacecraft systems. The fundamental questions of organizing the on-the-ground spacecraft testing and the methods of mathematical modeling were presented.

The Perspectives of Students in the College of Basic Education on the Characteristics of Effective English Language Teachers

ERIC Educational Resources Information Center

Taqi, Hanan A.; Al-Nouh, Nowreyah A.; Akbar, Rahima S.

2014-01-01

This paper presents a research study designed to investigate the characteristics of effective teachers of English and the uniqueness of Teachers of English as a Foreign Language (EFL). The research is based on four general categories: English language proficiency, educational perception, organization and communication skills, social and emotional…

Data and Characteristics of the Illinois Public Community College System

ERIC Educational Resources Information Center

Illinois Community College Board, 2005

2005-01-01

This document contains data and characteristics of the Illinois public community college system and is designed to serve as a basic reference. No analysis of the data is intended in this document. The data are obtained from various surveys and studies conducted by Illinois Community College Board (ICCB). staff and from the colleges' annual MIS…

Factors Influencing Family Migration from Appalachia. Summary of Research Series.

ERIC Educational Resources Information Center

Groves, Robert H.; McCormick, Robert W.

This study was designed to compare farm brothers who stayed in the rural areas of Ohio with urban brothers who migrated to large metropolitan areas of Ohio. The objectives were (1) to identify and compare selected characteristics of farm owners or operators who stayed on a farm in the Appalachian region of Ohio with selected characteristics of…

Measures to increase airfield capacity by changing aircraft runway occupancy characteristics

NASA Technical Reports Server (NTRS)

Gosling, G. D.; Kanafani, A.; Rockaday, S. L. M.

1981-01-01

Airfield capacity and aircraft runway occupancy characteristics were studied. Factors that caused runway congestion and airfield crowding were identified. Several innovations designed to alleviate the congestion are discussed. Integrated landing management, the concept that the operation of the final approach and runway should be considered in concert, was identified as underlying all of the innovations.

Patients' Characteristics and Providers' Attitudes: Predictors of Screening Pregnant Women for Illicit Substance Use

ERIC Educational Resources Information Center

Kerker, Bonnie D.; Horwitz, Sarah M.; Leventhal, John M.

2004-01-01

Objective: This study's aim was to determine how patients' and providers' characteristics affect hospital providers' decisions to screen pregnant and postpartum women for illicit substances. Methods: A retrospective design was used. Participants included all low-income women (N=1,100) who delivered at an urban teaching hospital over a 12-month…

Teacher Quality: A Comparison of National Board--Certified and Non--Board--Certified Teachers of Deaf Students

ERIC Educational Resources Information Center

Scheetz, Nanci A.; Martin, David S.

2006-01-01

The study was designed to identify specific components of teacher excellence, focusing initially on the characteristics of the small number of teachers of the deaf who are certified by the National Board for Professional Teaching Standards (NBPTS), then comparing those with the characteristics of other teachers identified as master teachers by…

Characteristics and Dietary Patterns of Adolescents Who Value Eating Locally Grown, Organic, Nongenetically Engineered, and Nonprocessed Food

ERIC Educational Resources Information Center

Robinson-O'Brien, Ramona; Larson, Nicole; Neumark-Sztainer, Dianne; Stat, Peter Hannan M.; Story, Mary

2009-01-01

Objective: To examine characteristics of adolescents who value eating locally grown, organic, nongenetically engineered, and/or nonprocessed food and whether they are more likely than their peers to meet Healthy People 2010 dietary objectives. Design: Cross-sectional analysis using data from a population-based study in Minnesota (Project EAT:…

Characteristics of Difficult-to-Place Youth in State Custody: A Profile of the Exceptional Care Pilot Project Population

ERIC Educational Resources Information Center

Armour, Marilyn P.; Schwab, James

2007-01-01

This study examines the characteristics of Texas youth designated as "most difficult to place" recipients of service under the "Exceptional Care Pilot Project" (N = 46). Findings include, among others, high levels of comorbid psychiatric disturbance (greater than 3 diagnostic groupings), physical (78.3%) and sexual (88%)…

Social Skills Scores: The Impact of Primary School Population Characteristics and Parental Involvement

ERIC Educational Resources Information Center

Dekker, Karien; Kamerling, Margje

2017-01-01

Purpose: The paper aims to examine to what extent and why parental involvement as well as characteristics of ethnic school population influence social skills scores (social position, behavioural skills) of students. Design/methodology/approach: The study used the COOL5-18 database (2010) that included 553 Dutch primary schools and nearly 38,000…

The study of human higher mental functions as they relate to neurophysiological processes and personal characteristics

NASA Astrophysics Data System (ADS)

Runnova, Anastasiya; Zhuravlev, Maxim; Kulanin, Roman; Protasov, Pavel; Hramov, Alexander; Koronovskii, Alexey

2018-02-01

In this paper we study the correlation between the neurophysiological processes and personal characteristics arising in the processes of human higher mental functions. We find that the activity of the brain correlates with the results of psychological tests (according to the Cattell test). Experimental studies and math processing are described for operation design with the registration of human multi-channel EEG data in two phases (the processes of passive wakefulness (background) and special psychological testing (active phase)).

Analysis of operational requirements for medium density air transportation, volume 2

NASA Technical Reports Server (NTRS)

1975-01-01

The medium density air travel market is examined and defined in terms of numbers of people transported per route per day and frequency of service. The operational characteristics for aircraft to serve this market are determined and a basepoint aircraft is designed from which tradeoff studies and parametric variations can be conducted. The impact of the operational characteristics on the air travel system is evaluated along with the economic viability of the study aircraft. Research and technology programs for future study consideration are identified.

Reference Values of Within-District Intraclass Correlations of Academic Achievement by District Characteristics: Results from a Meta-Analysis of District-Specific Values

ERIC Educational Resources Information Center

Hedberg, E. C.; Hedges, Larry V.

2014-01-01

Randomized experiments are often considered the strongest designs to study the impact of educational interventions. Perhaps the most prevalent class of designs used in large scale education experiments is the cluster randomized design in which entire schools are assigned to treatments. In cluster randomized trials (CRTs) that assign schools to…

Atmosphere Explorer (AE) spacecraft system description

NASA Technical Reports Server (NTRS)

1972-01-01

The principal design and performance characteristics of the AE spacecraft system designed to support the Atmosphere Explorer C, D, and E missions are summarized. It has been prepared for the information of experimenters and other participants in the Atmosphere Explorer program as a general guide for design and operational planning. The description represents the spacecraft system as defined at the conclusion of the interface definition study.

Newly Licensed RN Retention: Hospital and Nurse Characteristics.

PubMed

Blegen, Mary A; Spector, Nancy; Lynn, Mary R; Barnsteiner, Jane; Ulrich, Beth T

2017-10-01

The aims of this study were to examine the relationship between 1-year retention of newly licensed RNs (NLRNs) employed in hospitals and personal and hospital characteristics, and determine which characteristics had the most influence. A secondary analysis of data collected in a study of transition to practice was used to describe the retention of 1464 NLRNs employed by 97 hospitals in 3 states. Hospitals varied in size, location (urban and rural), Magnet® designation, and university affiliation. The NLRNs also varied in education, age, race, gender, and experience. The overall retention rate at 1 year was 83%. Retention of NLRNs was higher in urban areas and in Magnet hospitals. The only personal characteristic that affected retention was age, with younger nurses more likely to stay. Hospital characteristics had a larger effect on NLRN retention than personal characteristics. Hospitals in rural areas have a particular challenge in retaining NLRNs.

Theoretical studies of system performance and adaptive optics design parameters

NASA Astrophysics Data System (ADS)

Tyson, Robert K.

1990-08-01

The ultimate performance of an adaptive optics (AO) system can be sensitive to specific design parameters of individual components. The type and configuration of a wavefront sensor or the shape of individual deformable mirror actuator influence functions can have a profound effect on the correctability of the AO system. This paper will discuss the results of a theoretical study which employed both closed form analytic solutions and computer models. A parametric analysis of wavefront sensor characteristics, noise, and subaperture geometry are independently evaluated against system response to an aberrated wave characteristic of atmospheric turbulence. Similarly, the shape and extent of the deformable mirror influence function and the placement and number of actuators is evaluated to characterize the effects of fitting error and coupling.

Long-term radiation effects on GaAs solar cell characteristics

NASA Technical Reports Server (NTRS)

Heinbockel, J. H.; Doviak, M. J.

1978-01-01

This report investigates preliminary design considerations which should be considered for a space experiment involving Gallium Arsenide (GaAs) solar cells. The electron radiation effects on GaAs solar cells were conducted in a laboratory environment, and a statistical analysis of the data is presented. In order to augment the limited laboratory data, a theoretical investigation of the effect of radiation on GaAs solar cells is also developed. The results of this study are empirical prediction equations which can be used to estimate the actual damage of electrical characteristics in a space environment. The experimental and theoretical studies also indicate how GaAs solar cell parameters should be designed in order to withstand the effects of electron radiation damage.

Optimal Design of Spring Characteristics of Damper for Subharmonic Vibration in Automatic Transmission Powertrain

NASA Astrophysics Data System (ADS)

Nakae, T.; Ryu, T.; Matsuzaki, K.; Rosbi, S.; Sueoka, A.; Takikawa, Y.; Ooi, Y.

2016-09-01

In the torque converter, the damper of the lock-up clutch is used to effectively absorb the torsional vibration. The damper is designed using a piecewise-linear spring with three stiffness stages. However, a nonlinear vibration, referred to as a subharmonic vibration of order 1/2, occurred around the switching point in the piecewise-linear restoring torque characteristics because of the nonlinearity. In the present study, we analyze vibration reduction for subharmonic vibration. The model used herein includes the torque converter, the gear train, and the differential gear. The damper is modeled by a nonlinear rotational spring of the piecewise-linear spring. We focus on the optimum design of the spring characteristics of the damper in order to suppress the subharmonic vibration. A piecewise-linear spring with five stiffness stages is proposed, and the effect of the distance between switching points on the subharmonic vibration is investigated. The results of our analysis indicate that the subharmonic vibration can be suppressed by designing a damper with five stiffness stages to have a small spring constant ratio between the neighboring springs. The distances between switching points must be designed to be large enough that the amplitude of the main frequency component of the systems does not reach the neighboring switching point.

Individual determinants of research utilization by nurses: a systematic review update.

PubMed

Squires, Janet E; Estabrooks, Carole A; Gustavsson, Petter; Wallin, Lars

2011-01-05

Interventions that have a better than random chance of increasing nurses' use of research are important to the delivery of quality patient care. However, few reports exist of successful research utilization in nursing interventions. Systematic identification and evaluation of individual characteristics associated with and predicting research utilization may inform the development of research utilization interventions. To update the evidence published in a previous systematic review on individual characteristics influencing research utilization by nurses. As part of a larger systematic review on research utilization instruments, 12 online bibliographic databases were searched. Hand searching of specialized journals and an ancestry search was also conducted. Randomized controlled trials, clinical trials, and observational study designs examining the association between individual characteristics and nurses' use of research were eligible for inclusion. Studies were limited to those published in the English, Danish, Swedish, and Norwegian languages. A vote counting approach to data synthesis was taken. A total of 42,770 titles were identified, of which 501 were retrieved. Of these 501 articles, 45 satisfied our inclusion criteria. Articles assessed research utilization in general (n = 39) or kinds of research utilization (n = 6) using self-report survey measures. Individual nurse characteristics were classified according to six categories: beliefs and attitudes, involvement in research activities, information seeking, education, professional characteristics, and socio-demographic/socio-economic characteristics. A seventh category, critical thinking, emerged in studies examining kinds of research utilization. Positive relationships, at statistically significant levels, for general research utilization were found in four categories: beliefs and attitudes, information seeking, education, and professional characteristics. The only characteristic assessed in a sufficient number of studies and with consistent findings for the kinds of research utilization was attitude towards research; this characteristic had a positive association with instrumental and overall research utilization. This review reinforced conclusions in the previous review with respect to positive relationships between general research utilization and: beliefs and attitudes, and current role. Furthermore, attending conferences/in-services, having a graduate degree in nursing, working in a specialty area, and job satisfaction were also identified as individual characteristics important to research utilization. While these findings hold promise as potential targets of future research utilization interventions, there were methodological problems inherent in many of the studies that necessitate their findings be replicated in further research using more robust study designs and multivariate assessment methods.

Individual determinants of research utilization by nurses: a systematic review update

PubMed Central

2011-01-01

Background Interventions that have a better than random chance of increasing nurses' use of research are important to the delivery of quality patient care. However, few reports exist of successful research utilization in nursing interventions. Systematic identification and evaluation of individual characteristics associated with and predicting research utilization may inform the development of research utilization interventions. Objective To update the evidence published in a previous systematic review on individual characteristics influencing research utilization by nurses. Methods As part of a larger systematic review on research utilization instruments, 12 online bibliographic databases were searched. Hand searching of specialized journals and an ancestry search was also conducted. Randomized controlled trials, clinical trials, and observational study designs examining the association between individual characteristics and nurses' use of research were eligible for inclusion. Studies were limited to those published in the English, Danish, Swedish, and Norwegian languages. A vote counting approach to data synthesis was taken. Results A total of 42,770 titles were identified, of which 501 were retrieved. Of these 501 articles, 45 satisfied our inclusion criteria. Articles assessed research utilization in general (n = 39) or kinds of research utilization (n = 6) using self-report survey measures. Individual nurse characteristics were classified according to six categories: beliefs and attitudes, involvement in research activities, information seeking, education, professional characteristics, and socio-demographic/socio-economic characteristics. A seventh category, critical thinking, emerged in studies examining kinds of research utilization. Positive relationships, at statistically significant levels, for general research utilization were found in four categories: beliefs and attitudes, information seeking, education, and professional characteristics. The only characteristic assessed in a sufficient number of studies and with consistent findings for the kinds of research utilization was attitude towards research; this characteristic had a positive association with instrumental and overall research utilization. Conclusions This review reinforced conclusions in the previous review with respect to positive relationships between general research utilization and: beliefs and attitudes, and current role. Furthermore, attending conferences/in-services, having a graduate degree in nursing, working in a specialty area, and job satisfaction were also identified as individual characteristics important to research utilization. While these findings hold promise as potential targets of future research utilization interventions, there were methodological problems inherent in many of the studies that necessitate their findings be replicated in further research using more robust study designs and multivariate assessment methods. PMID:21208425

Design characteristics of acute care units in china.

PubMed

Lu, Yi; Wang, Yijia

2014-01-01

To describe the current state of design characteristics of acute care units in China's public hospitals and compare these with characteristics with acute care units in the United States. The healthcare construction industry in China is one of the fastest growing sectors in China and, arguably, in the world. Understanding the physical design of acute care units in China is of great importance because it will influence a large population. Descriptive study was performed of unit configuration, size, patient visibility, distance to nursing station and supplies, and lighting conditions in 25 units in 19 public hospitals built after 2003. Data and information were collected based on spatial and visibility analysis. The study identified major design characteristics of the recently built (from 2003 onward) acute care units in China, comparing them, where appropriate, with those in U.S. It found there are three dominant types of unit layout: single-corridor (52%), triangular (36%), and double-corridor (12%). The number of private rooms is very low (11%), compared with two- or three-bed rooms. Centralized nursing stations are the only type of nurses' working area. China also has a large unit size in terms of number of patient beds. The average number of patient beds in a unit is 40.6 in China (versus 32.9 in U.S.). The care units in China have longer walking distance from nursing station to patient bedside. The percentage of beds visible from a nursing station is lower in China than in the U.S. The access to natural light and direct sunlight in patient rooms is greater in China compared with those in U.S.-100% of patient rooms in China have natural lighting. A majority of them face south or southeast and thus receiving direct sunlight (91.4%). Because of the differences in economies and building codes, there are dramatic differences between the spatial characteristics of acute care units in China and the United States. © 2014 Vendome Group, LLC.

Analysis of vibration characteristics of opening device for deepwater robot cabin door and study of its structural optimization design

NASA Astrophysics Data System (ADS)

Zeng, Baoping; Liu, Jipeng; Zhang, Yu; Gong, Yajun; Hu, Sanbao

2017-12-01

Deepwater robots are important devices for human to explore the sea, which is being under development towards intellectualization, multitasking, long-endurance and large depth along with the development of science and technology. As far as a deep-water robot is concerned, its mechanical systems is an important subsystem because not only it influences the instrument measuring precision and shorten the service life of cabin devices but also its overlarge vibration and noise lead to disadvantageous effects to marine life within the operational area. Therefore, vibration characteristics shall be key factor for the deep-water robot system design. The sample collection and recycling system of some certain deepwater robot in a mechanism for opening the underwater cabin door for external operation and recycling test equipment is focused in this study. For improving vibration characteristics of locations of the cabin door during opening processes, a vibration model was established to the opening system; and the structural optimization design was carried out to its important structures by utilizing the multi-objective shape optimization and topology optimization method based on analysis of the system vibration. Analysis of characteristics of exciting forces causing vibration was first carried out, which include characteristics of dynamic loads within the hinge clearances and due to friction effects and the fluid dynamic exciting forces during processes of opening the cabin door. Moreover, vibration acceleration responses for a few important locations of the devices for opening the cabin cover were deduced by utilizing the modal synthesis method so that its rigidity and modal frequency may be one primary factor influencing the system vibration performances based on analysis of weighted acceleration responses. Thus, optimization design was carried out to the cabin cover by utilizing the multi-objective topology optimization method to perform reduction of weighted accelerations of key structure locations.

Ergonomic study and static analysis for new design of electric scooter

NASA Astrophysics Data System (ADS)

Fadzly, M. K.; Munirah, Anis; Shayfull, Z.; Saad, Mohd Sazli

2017-09-01

The purposes of this project are to design and diversify the function of a battery powered scooter frame which is more practical for the human factor in ergonomic and optimum design. The new design is based on ideas which are studied from existing scooter frame, United States Patent design and European States International Patent design. The final idea of concept design for scooter frame is based on concept chosen from the best characteristics and it is divided into three main difference ideas and the matrix evaluation method is applied. Analysis that applies to frame design, arm, rim and drive train component is based on Cosmos Express program. As a conclusion, the design that is produce are able to carry the maximum also has more practical features in ergonomic view.

A study of performance and cost improvement potential of the 120 inch (3.05 m) diameter solid rocket motor. Volume 1: Summary report

NASA Technical Reports Server (NTRS)

Backlund, S. J.; Rossen, J. N.

1971-01-01

A parametric study of ballistic modifications to the 120 inch diameter solid propellant rocket engine which forms part of the Air Force Titan 3 system is presented. 576 separate designs were defined and 24 were selected for detailed analysis. Detailed design descriptions, ballistic performance, and mass property data were prepared for each design. It was determined that a relatively simple change in design parameters could provide a wide range of solid propellant rocket engine ballistic characteristics for future launch vehicle applications.

The impact of solar cell technology on planar solar array performance

NASA Technical Reports Server (NTRS)

Mills, Michael W.; Kurland, Richard M.

1989-01-01

The results of a study into the potential impact of advanced solar cell technologies on the characteristics (weight, cost, area) of typical planar solar arrays designed for low, medium and geosynchronous altitude earth orbits are discussed. The study considered planar solar array substrate designs of lightweight, rigid-panel graphite epoxy and ultra-lightweight Kapton. The study proposed to answer the following questions: Do improved cell characteristics translate into array-level weight, size and cost improvements; What is the relative importance of cell efficiency, weight and cost with respect to array-level performance; How does mission orbital environment affect array-level performance. Comparisons were made at the array level including all mechanisms, hinges, booms, and harnesses. Array designs were sized to provide 5kW of array power (not spacecraft bus power, which is system dependent but can be scaled from given values). The study used important grass roots issues such as use of the GaAs radiation damage coefficients as determined by Anspaugh. Detailed costing was prepared, including cell and cover costs, and manufacturing attrition rates for the various cell types.

Designed microstructure based on color filter and metallic nanoslit for multiband spectral compatible control

NASA Astrophysics Data System (ADS)

Zhan, Zhigang; Han, Yuge

2018-01-01

Controlling the spectral characteristics by regulating the geometry of microstructure has become an effective method to meet the requirements of various applications. To mediate the spectral characteristics, metallic subwavelength slits with different structures and color filters consisting of diverse materials were discussed, and then a designed microstructure composed of color filter and metallic slits, which were surrounded by grooves, was put forward for a compatible effect of controlling the spectral characteristics. Afterward, the spectral characteristics of the proposed structure were simulated by finite-difference time-domain method in the wavelength range of 300 to 10,000 nm. Additionally, the effects of geometric parameters on the spectral characteristics were studied. The results show that the presented microstructure can reflect a monochromatic color at the wavelength of 600 nm and its reflectance is ˜40%. The average absorptance near the wavelength of 1060 nm is more than 95%, and the average reflectance in the infrared band exceeds 80%. In conclusion, the compatible spectrum control in three bands (i.e., visible, near-infrared, and mid-infrared) was realized.

Low-speed aerodynamic characteristics of a 13.1-percent-thick, high-lift airfoil

NASA Technical Reports Server (NTRS)

Sivier, K. R.; Ormsbee, A. I.; Awker, R. W.

1974-01-01

Experimental study of the low-speed, sectional characteristics of a high-lift airfoil, and comparison of these characteristics with the predictions of the theoretical methods used in the airfoil's design. The 13.1% thick UI-1720 airfoil was found to achieve the predicted maximum lift coefficient of nearly 2.0. No upper-surface flow separation was found below the stall angle of attack of 16 deg; it appeared that stall was due to an abrupt leading-edge flow separation.

Experimental and analytical study of the DC breakdown characteristics of polypropylene laminated paper with a butt gap condition considering the insulation design of superconducting cable

NASA Astrophysics Data System (ADS)

Seo, In-jin; Choi, Won; Seong, Jae-gyu; Lee, Bang-wook; Koo, Ja-yoon

2014-08-01

It has been reported that the insulation design under DC stress is considered as one of the critical factors in determining the performance of high-voltage direct current (HVDC) superconducting cable. Therefore, it is fundamentally necessary to investigate the DC breakdown characteristics of the composite insulation system consisting of liquid nitrogen (LN2)/polypropylene-laminated-paper (PPLP). In particular, the insulation characteristics under DC polarity reversal condition should be verified to understand the polarity effect of the DC voltage considering the unexpected incidents taking place at line-commutated-converters (LCC) under service at a DC power grid. In this study, to examine the variation of DC electric field strength, the step voltage and polarity reversal breakdown tests are performed under DC stress. Also, we investigate the electric field distributions in a butt gap of the LN2/PPLP condition considering the DC polarity reversal by using simulation software.

Experimental and Modeling Studies of the Combustion Characteristics of Conventional and Alternative Jet Fuels. Final Report

NASA Technical Reports Server (NTRS)

Meeks, Ellen; Naik, Chitral V.; Puduppakkam, Karthik V.; Modak, Abhijit; Egolfopoulos, Fokion N.; Tsotsis, Theo; Westbrook, Charles K.

2011-01-01

The objectives of this project have been to develop a comprehensive set of fundamental data regarding the combustion behavior of jet fuels and appropriately associated model fuels. Based on the fundamental study results, an auxiliary objective was to identify differentiating characteristics of molecular fuel components that can be used to explain different fuel behavior and that may ultimately be used in the planning and design of optimal fuel-production processes. The fuels studied in this project were Fischer-Tropsch (F-T) fuels and biomass-derived jet fuels that meet certain specifications of currently used jet propulsion applications. Prior to this project, there were no systematic experimental flame data available for such fuels. One of the key goals has been to generate such data, and to use this data in developing and verifying effective kinetic models. The models have then been reduced through automated means to enable multidimensional simulation of the combustion characteristics of such fuels in real combustors. Such reliable kinetic models, validated against fundamental data derived from laminar flames using idealized flow models, are key to the development and design of optimal combustors and fuels. The models provide direct information about the relative contribution of different molecular constituents to the fuel performance and can be used to assess both combustion and emissions characteristics.

Relationship Between Job Characteristics and Organizational Commitment: A Descriptive Analytical Study

PubMed Central

Faraji, Obeidollah; Ramazani, Abbas Ali; Hedaiati, Pouria; Aliabadi, Ali; Elhamirad, Samira; Valiee, Sina

2015-01-01

Background: Many factors influence the organizational commitment of employees. One of these factors is job designing since it affects the attitude, beliefs, and feelings of the organization employees. Objectives: We aimed to determine the relationship between job characteristics and organizational commitment among the employees of hospitals. Patients and Methods: In this descriptive and correlational study, 152 Iranian employees of the hospitals (physicians, nurses, and administrative staff) were selected through stratified random sampling. Data gathered using 3-part questionnaire of “demographic information”, “job characteristics model,” and “organizational commitment,” in 2011. Study data were analyzed using SPSS v. 16. Results: There was significant statistical correlation between organizational commitment and variables of educational level (P = 0.001) and job category (P = 0.001). Also, a direct and significant correlation existed between motivating potential score and job feedback on one hand and organizational commitment on the other hand (P = 0.014). Conclusions: According to the results, managers of the hospitals should increase staff’s commitment through paying attention to proper job designing. PMID:26734472

Assured crew return vehicle post landing configuration design and test

NASA Technical Reports Server (NTRS)

1992-01-01

The 1991-1992 senior Mechanical and Aerospace Engineering Design class continued work on the post landing configurations for the Assured Crew Return Vehicle (ACRV) and the Emergency Egress Couch (EEC). The ACRV will be permanently docked to Space Station Freedom fulfilling NASA's commitment of Assured Crew Return Capability in the event of an accident or illness aboard Space Station Freedom. The EEC provides medical support and a transportation surface for an incapacitated crew member. The objective of the projects was to give the ACRV Project Office data to feed into their feasibility studies. Four design teams were given the task of developing models with dynamically and geometrically scaled characteristics. Groups one and two combined efforts to design a one-fifth scale model for the Apollo Command Module derivative, an on-board flotation system, and a lift attachment point system. This model was designed to test the feasibility of a rigid flotation and stabilization system and to determine the dynamics associated with lifting the vehicle during retrieval. However, due to priorities, it was not built. Group three designed a one-fifth scale model of the Johnson Space Center (JSC) benchmark configuration, the Station Crew Return Alternative Module (SCRAM) with a lift attachment point system. This model helped to determine the flotation and lifting characteristics of the SCRAM configuration. Group four designed a full scale EEC with changeable geometric and geometric and dynamic characteristics. This model provided data on the geometric characteristics of the EEC and on the placement of the CG and moment of inertia. It also gave the helicopter rescue personnel direct input to the feasibility study. Section 1 describes in detail the design of a one-fifth scale model of the Apollo Command Module Derivative (ACMD) ACRV. The objective of the ACMD Configuration Model Team was to use geometric and dynamic constraints to design a one-fifth scale working model of the Apollo Command Module Derivative (ACMD) configuration with a Lift Attachment Point (LAP) System. This model was required to incorporate a rigidly mounted flotation system and the egress system designed the previous academic year. The LAP system was to be used to determine the dynamic effects of locating the lifting points at different locations on the vehicle. The team was then to build and test the model; however, due to priorities, this did not occur. To better simulate the ACMD after a water landing, the nose cone section was removed and the deck area exposed. The areas researched during the design process were construction, center of gravity and moment of inertia, and lift attachment points.

Toward scalable parts families for predictable design of biological circuits.

PubMed

Lucks, Julius B; Qi, Lei; Whitaker, Weston R; Arkin, Adam P

2008-12-01

Our current ability to engineer biological circuits is hindered by design cycles that are costly in terms of time and money, with constructs failing to operate as desired, or evolving away from the desired function once deployed. Synthetic biologists seek to understand biological design principles and use them to create technologies that increase the efficiency of the genetic engineering design cycle. Central to the approach is the creation of biological parts--encapsulated functions that can be composited together to create new pathways with predictable behaviors. We define five desirable characteristics of biological parts--independence, reliability, tunability, orthogonality and composability, and review studies of small natural and synthetic biological circuits that provide insights into each of these characteristics. We propose that the creation of appropriate sets of families of parts with these properties is a prerequisite for efficient, predictable engineering of new function in cells and will enable a large increase in the sophistication of genetic engineering applications.

Static characteristics design of hydrostatic guide-ways based on fluid-structure interactions

NASA Astrophysics Data System (ADS)

Lin, Shuo; Yin, YueHong

2016-10-01

With the raising requirements in micro optical systems, the available machines become hard to achieve the process dynamic and accuracy in all aspects. This makes compact design based on fluid/structure interactions (FSI) important. However, there is a difficulty in studying FSI with oil film as fluid domain. This paper aims at static characteristic design of a hydrostatic guide-way with capillary restrictors based on FSI. The pressure distribution of the oil film land is calculated by solving the Reynolds-equation with Galerkin technique. The deformation of structure is calculated by commercial FEM software, MSC. Nastran. A matlab program is designed to realize the coupling progress by modifying the load boundary in the submitting file and reading the deformation result. It's obvious that the stiffness of the hydrostatic bearing decreases with the weakening of the bearing structure. This program is proposed to make more precise prediction of bearing stiffness.

The study and design of tension controller

NASA Astrophysics Data System (ADS)

Jun, G.; Lamei, X.

2018-02-01

Tension control is a wide used technology in areas such as textiles, paper and plastic films. In this article, the tension control system release and winding process is analyzed and the mathematical model of tension control system is established, and a high performance tension controller is designed. In hardware design, STM32F130 single chip microcomputer is used as the control core, which has the characteristics of fast running speed and rich peripheral features. In software design, μC/OS-II operating system is introduced to improve the efficiency of single chip microcomputer, and enhance the independence of each module, and make development and maintenance more convenient. The taper tension control is adopted in the winding part, which can effectively solve the problem of rolling shrinkage. The results show that the tension controller has the characteristics of simple structure, easy operation and stable performance.

On an efficient multilevel inverter assembly: structural savings and design optimisations

NASA Astrophysics Data System (ADS)

Choupan, Reza; Nazarpour, Daryoush; Golshannavaz, Sajjad

2018-01-01

This study puts forward an efficient unit cell to be taken in use in multilevel inverter assemblies. The proposed structure is in line with reductions in number of direct current (dc) voltage sources, insulated-gate bipolar transistors (IGBTs), gate driver circuits, installation area, and hence the implementation costs. Such structural savings do not sacrifice the technical performance of the proposed design wherein an increased number of output voltage levels is attained, interestingly. Targeting a techno-economic characteristic, the contemplated structure is included as the key unit of cascaded multilevel inverters. Such extensions require development of applicable design procedures. To this end, two efficient strategies are elaborated to determine the magnitudes of input dc voltage sources. As well, an optimisation process is developed to explore the optimal allocation of different parameters in overall performance of the proposed inverter. These parameters are investigated as the number of IGBTs, dc sources, diodes, and overall blocked voltage on switches. In the lights of these characteristics, a comprehensive analysis is established to compare the proposed design with the conventional and recently developed structures. Detailed simulation and experimental studies are conducted to assess the performance of the proposed design. The obtained results are discussed in depth.

Basic principles of test-negative design in evaluating influenza vaccine effectiveness.

PubMed

Fukushima, Wakaba; Hirota, Yoshio

2017-08-24

Based on the unique characteristics of influenza, the concept of "monitoring" influenza vaccine effectiveness (VE) across the seasons using the same observational study design has been developed. In recent years, there has been a growing number of influenza VE reports using the test-negative design, which can minimize both misclassification of diseases and confounding by health care-seeking behavior. Although the test-negative designs offer considerable advantages, there are some concerns that widespread use of the test-negative design without knowledge of the basic principles of epidemiology could produce invalid findings. In this article, we briefly review the basic concepts of the test-negative design with respect to classic study design such as cohort studies or case-control studies. We also mention selection bias, which may be of concern in some countries where rapid diagnostic testing is frequently used in routine clinical practices, as in Japan. Copyright © 2017. Published by Elsevier Ltd.

Exercise prescription after fragility fracture in older adults: a scoping review

PubMed Central

Feehan, Lynne M.; Beck, Charlotte A.; Harris, Susan R.; MacIntyre, Donna L.; Li, Linda C.

2017-01-01

Purpose To identify and chart research literature on safety, efficacy or effectiveness of exercise prescription following fracture in older adults. Methods We conducted a systematic, research-user-informed, scoping review. The population of interest was adults aged ≥ 45 years with any fracture. ‘Exercise prescription’ included post-fracture therapeutic exercise, physical activity or rehabilitation interventions. Eligible designs included knowledge synthesis studies, primary interventional studies and observational studies. Trained reviewers independently evaluated citations for inclusion. Results A total of 9415 citations were reviewed with 134 citations (119 unique studies) identified: 13 knowledge syntheses, 95 randomized or controlled clinical trials, and 11 ‘other’ designs, representing 74 articles on lower extremity fractures, 34 on upper extremity, eight on vertebral, and three on mixed body region fractures. Exercise prescription characteristics were often missing or poorly described. Six general categories emerged describing exercise prescription characteristics: timing post-fracture, person prescribing, program design, functional focus, exercise script parameters and co-interventions. Upper extremity and ankle fracture studies focused on fracture healing or structural impairment outcomes, whereas hip fracture studies focused more on activity limitation outcomes. The variety of different outcome measures used made pooling or comparison of outcomes difficult. Conclusions There was insufficient information to identify evidence-informed parameters for safe and effective exercise prescription for older adults following fracture. Key gaps in the literature include limited numbers of studies on exercise prescription following vertebral fracture, poor delineation of effectiveness of different strategies for early post-fracture mobilization following upper extremity fracture, and inconsistent details of exercise prescription characteristics after lower extremity fracture. PMID:20967425

Analysis and design of lean direct injection fuel nozzles by eddy resolved turbulence simulation

NASA Astrophysics Data System (ADS)

Ryon, Jason Allen

Combustion systems in gas turbine engines are subjected to particular scrutiny in regards to the emissions which they produce. Of special interest are the emissions of Oxides of Nitrogen (NOx), which have a direct impact on air quality as well as health aspects. There is a need in the industry for elegant designs for these combustion systems which reduce the formation of NOx. The present study includes an in depth analysis of a state-of-the art prefilming airblast injector which is designed for achieving low NOx. The design has been studied through the use of turbulence resolving simulation to differentiate what is important for the design of this system. The OpenFOAM CFD software, with a Delayed Detached Eddy Simulation (DDES) model recently developed at Iowa State University, is shown to provide a suitable design tool which has been used to accurately predict a variety of parameters important to this combustion system. Of particular interest are the mixing characteristics of the atomizer, which have been studied through a series of CFD simulations including single-phase, multi-species, and multi-phase simulations. Turbulence simulations are validated by comparison to United Technologies Aerospace Systems (UTAS) data with air only. It is shown how DDES is able to capture the downstream mixing of air streams. Finally, a novel atomizer has been designed with these methods which is intended to promote thorough mixing. The CFD mixing characteristics are described and compared to the existing injector.

Effects of a school reform on longitudinal stability of students' preferences with regard to education.

PubMed

Könings, Karen D; Brand-Gruwel, Saskia; Elen, Jan

2012-09-01

Students' perspective on education is of crucial importance for its effectivity, but students' opinions are seldom acknowledged by teachers and designers. Student participation in the educational design process could be a suitable tool to better take students' preferences into account. However, for effective participatory design, it is necessary to know whether students have stable preferences for the design of their education. Changeability of preferences would require a more continuing design process allowing continuous adaptations. This longitudinal survey study aimed to determine the changeability over time of students' preferences for different aspects of a learning environment. Additionally, causes of possible changes in preferences are investigated. The participants were 1,335 high school students of five schools for secondary education in the Netherlands, joining this study during a period of 2 years. Data about students' preferences were collected at three moments, using the Inventory of Perceived Study Environment Extended. Learning-related student characteristics, such as processing strategies and motivational orientations, were measured with the Inventory of Learning Styles. Additionally, data on learning performances were collected. The results showed stability on preferences for almost all studied characteristics of the learning environment. Particularly remarkable was a drop in desirability for student autonomy. This was larger for students with a certificate-oriented motivation and smaller for self-regulated students. Additionally, poorly performing students had a larger decrease in preference for autonomy. The stability on most aspects supports that participatory design might result in fairly stable instructional designs, although caution is needed with respect to student autonomy. ©2011 The British Psychological Society.

47 CFR 73.182 - Engineering standards of allocation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... on clear channels with powers no less than 10kW nor greater than 50 kW. These stations are designed..., objectionable characteristics inherent in many modern receivers. The AVC circuits in the better designed... interferences are nevertheless calculated for purposes of comparative studies, resulting in an RSS value of 1.47...

47 CFR 73.182 - Engineering standards of allocation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... on clear channels with powers no less than 10kW nor greater than 50 kW. These stations are designed..., objectionable characteristics inherent in many modern receivers. The AVC circuits in the better designed... interferences are nevertheless calculated for purposes of comparative studies, resulting in an RSS value of 1.47...

47 CFR 73.182 - Engineering standards of allocation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... on clear channels with powers no less than 10kW nor greater than 50 kW. These stations are designed..., objectionable characteristics inherent in many modern receivers. The AVC circuits in the better designed... interferences are nevertheless calculated for purposes of comparative studies, resulting in an RSS value of 1.47...

47 CFR 73.182 - Engineering standards of allocation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... on clear channels with powers no less than 10kW nor greater than 50 kW. These stations are designed..., objectionable characteristics inherent in many modern receivers. The AVC circuits in the better designed... interferences are nevertheless calculated for purposes of comparative studies, resulting in an RSS value of 1.47...

47 CFR 73.182 - Engineering standards of allocation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... on clear channels with powers no less than 10kW nor greater than 50 kW. These stations are designed..., objectionable characteristics inherent in many modern receivers. The AVC circuits in the better designed... interferences are nevertheless calculated for purposes of comparative studies, resulting in an RSS value of 1.47...

Rotor systems research aircraft predesign study. Volume 4: Preliminary draft detail specification

NASA Technical Reports Server (NTRS)

Miller, A. N.; Linden, A. W.

1972-01-01

The RSRA requirements are presented in a detail specification format. Coverage of the requirements includes the following headings: (1) aircraft characteristics, (2) general features of design and construction, (3) aerodynamics, (4) structural design criteria, (5) flight control system, (6) propulsion subsystem, and (7) secondary power and distribution subsystem.

An optimized implementation of a fault-tolerant clock synchronization circuit

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

1995-01-01

A fault-tolerant clock synchronization circuit was designed and tested. A comparison to a previous design and the procedure followed to achieve the current optimization are included. The report also includes a description of the system and the results of tests performed to study the synchronization and fault-tolerant characteristics of the implementation.

DIFFUSION IN THE VICINITY OF STANDARD-DESIGN NUCLEAR POWER PLANTS--II: WIND-TUNNEL EVALUATION OF BUILDING-WAKE CHARACTERISTICS

EPA Science Inventory

Laboratory experiments were conducted to simulate radiopollutant effluents released to the atmosphere from two standard-design nuclear power plants. The main objective of the study was to compare the dispersion in the wakes of the plants with that in a simulated atmospheric bound...

VISUAL AND AUDIO PRESENTATION IN MACHINE PROGRAMED INSTRUCTION. FINAL REPORT.

ERIC Educational Resources Information Center

ALLEN, WILLIAM H.

THIS STUDY WAS PART OF A LARGER RESEARCH PROGRAM AIMED TOWARD DEVELOPMENT OF PARADIGMS OF MESSAGE DESIGN. OBJECTIVES OF THREE PARALLEL EXPERIMENTS WERE TO EVALUATE INTERACTIONS OF PRESENTATION MODE, PROGRAM TYPE, AND CONTENT AS THEY AFFECT LEARNER CHARACTERISTICS. EACH EXPERIMENT USED 18 TREATMENTS IN A FACTORIAL DESIGN WITH RANDOMLY SELECTED…

Design and Development of a Geography Module for First-Year Primary Student Teachers

ERIC Educational Resources Information Center

Blankman, Marian; van der Schee, Joop; Boogaard, Marianne; Volman, Monique

2016-01-01

This paper describes the result of a design study in which a geography course was developed and tested aiming to develop the Pedagogical Content Knowledge (PCK) of first-year primary student teachers. This resulted in a course called "Consciously Teaching Geography" with characteristics as (1) starting from students' preconceptions and…

Design study of superconducting magnets for a combustion magnetohydrodynamic /MHD/ generator

NASA Technical Reports Server (NTRS)

Thome, R. J.; Ayers, J. W.; Hrycaj, T. M.; Burkhart, J. A.

1978-01-01

Results are presented for a trade-off and preliminary design study on concepts of a superconducting magnet system for a combustion MHD generator test facility. The main objective is to gain insight into the magnitude of the project in terms of physical characteristics and cost. The net result of a first-phase evaluation of attractive design alternatives is to concentrate subsequent efforts on (1) a racetrack coil geometry with an operating temperature of 4.2 K, (2) a racetrack coil geometry with an operating temperature of 2.0 K, and (3) a rectangular saddle coil geometry with an operating temperature of 4.2 K. All three systems are to produce 8 T, and use NbTi superconductor and iron for field enhancement. Design characteristics of the three systems are described. It is shown that the racetrack and rectangular saddle coil geometries seem most suitable for this application, the former because of its simplicity and the latter because of its efficient use of material. Advantages of the rectangular saddle over the two other systems are stressed.

Lithium D-cell study

NASA Technical Reports Server (NTRS)

Size, P.; Takeuchi, Esther S.

1993-01-01

The purpose of this contract is to evaluate parametrically the effects of various factors including the electrolyte type, electrolyte concentration, depolarizer type, and cell configuration on lithium cell electrical performance and safety. This effort shall allow for the selection and optimization of cell design for future NASA applications while maintaining close ties with WGL's continuous improvements in manufacturing processes and lithium cell design. Taguchi experimental design techniques are employed in this task, and allow for a maximum amount of information to be obtained while requiring significantly less cells than if a full factorial design were employed. Acceptance testing for this task is modeled after the NASA Document EP5-83-025, Revision C, for cell weights, OCV's and load voltages. The performance attributes that are studied in this effort are fresh capacity and start-up characteristics evaluated at two rates and two temperatures, shelf-life characteristics including start-up and capacity retention, and iterative microcalorimetry measurements. Abuse testing includes forced over discharge at two rates with and without diode protection, temperature tolerance testing, and shorting tests at three rates with the measurement of heat generated during shorting conditions.

Channelled scaffolds for engineering myocardium with mechanical stimulation.

PubMed

Zhang, Ting; Wan, Leo Q; Xiong, Zhuo; Marsano, Anna; Maidhof, Robert; Park, Miri; Yan, Yongnian; Vunjak-Novakovic, Gordana

2012-10-01

The characteristics of the matrix (composition, structure, mechanical properties) and external culture environment (pulsatile perfusion, physical stimulation) of the heart are important characteristics in the engineering of functional myocardial tissue. This study reports on the development of chitosan-collagen scaffolds with micropores and an array of parallel channels (~ 200 µm in diameter) that were specifically designed for cardiac tissue engineering using mechanical stimulation. The scaffolds were designed to have similar structural and mechanical properties of those of native heart matrix. Scaffolds were seeded with neonatal rat heart cells and subjected to dynamic tensile stretch using a custom designed bioreactor. The channels enhanced oxygen transport and facilitated the establishment of cell connections within the construct. The myocardial patches (14 mm in diameter, 1-2 mm thick) consisted of metabolically active cells that began to contract synchronously after 3 days of culture. Mechanical stimulation with high tensile stress promoted cell alignment, elongation, and expression of connexin-43 (Cx-43). This study confirms the importance of scaffold design and mechanical stimulation for the formation of contractile cardiac constructs. Copyright © 2011 John Wiley & Sons, Ltd.

Ignition and combustion characteristics of metallized propellants

NASA Technical Reports Server (NTRS)

Turns, S. R.; Mueller, D. C.; Scott, M. J.

1990-01-01

Research designed to develop detailed knowledge of the secondary atomization and ignition characteristics of aluminum slurry propellants was started. These processes are studied because they are the controlling factors limiting the combustion efficiency of aluminum slurry propellants in rocket applications. A burner and spray rig system allowing the study of individual slurry droplets having diameters from about 10 to 100 microns was designed and fabricated. The burner generates a near uniform high temperature environment from the merging of 72 small laminar diffusion flames above a honeycomb matrix. This design permits essentially adiabatic operation over a wide range of stoichiometries without danger of flashback. A single particle sizing system and velocimeter also were designed and assembled. Light scattered from a focused laser beam is related to the particle (droplet) size, while the particle velocity is determined by its transit time through the focal volume. Light from the combustion of aluminum is also sensed to determine if ignition was achieved. These size and velocity measurements will allow the determination of disruption and ignition times as functions of drop sizes and ambient conditions.

The Influence of Neighborhood Characteristics and Parenting Practices on Academic Problems and Aggression Outcomes among Moderately to Highly Aggressive Children

ERIC Educational Resources Information Center

Barry, Tammy D.; Lochman, John E.; Fite, Paula J.; Wells, Karen C.; Colder, Craig R.

2012-01-01

The current study utilized a longitudinal design to examine the effects of neighborhood and parenting on 120 at-risk children's academic and aggressive outcomes, concurrently and at two later timepoints during the transition to middle school. Random effects regression models were estimated to examine whether neighborhood characteristics and harsh…

Visual Approach and Design: The Appropriate Characteristics of Instructional Photos as a Tool to Support Elementary Setting in Kuwait

ERIC Educational Resources Information Center

Buhamad, Ali

2016-01-01

This study provided a guide for appropriate characteristics of Instructional Photo to be used by teachers, trainers, coaches, instructors, and anyone else who desires to deliver knowledge and present content with visual meaning to elementary students in the state of Kuwait as a teaching style that supports teachers, facilitates clarification, and…

Effects of an Instructional Gaming Characteristic on Learning Effectiveness, Efficiency, and Engagement: Using a Storyline for Teaching Basic Statistical Skills

ERIC Educational Resources Information Center

Novak, Elena; Johnson, Tristan E.; Tenenbaum, Gershon; Shute, Valerie J.

2016-01-01

The study explored instructional benefits of a storyline gaming characteristic (GC) on learning effectiveness, efficiency, and engagement with the use of an online instructional simulation for graduate students in an introductory statistics course. A storyline is a game-design element that connects scenes with the educational content. In order to…

Style Is the Teacher. A Report of the Teacher Characteristics Project, 1967-68.

ERIC Educational Resources Information Center

Augenstein, Mildred B.

The Teacher Characteristics Project, one of the five undertaken as part of the design of an individualized instructional system for Dade County Schools, was set up to study the role of the teacher in the new system. A survey of literature, research, and projected strategies pointed up these trends and generalizations: (1) a shift in emphasis from…

Attitude control of an orbiting space vehicle.

NASA Technical Reports Server (NTRS)

Sutherlin, D. W.; Boland, J. S. , III; Borelli, M. T.

1971-01-01

Study of the normal and clamped modes of operation and dynamic response characteristics of the gimbaled control moment gyro (CMG) designed to fulfill the stringent pointing requirements of the Skylab telescope mount when the spacecraft is under the influence of both external and internal torques. The results indicate that the clamped mode of operation provides a feasible approach for significantly improving the system characteristics.

Behavioral and Psychometric Characteristics of Educable Mentally Retarded, Emotionally Handicapped, Learning Disabled, At-Risk and Normal Students. Final Report.

ERIC Educational Resources Information Center

Sherry, Lee

The study, involving 100 children (11 and 12 years old), was designed to generate descriptive data regarding the behavioral and psychometric characteristics of exceptional children in the public schools. A review of the literature revealed that it is difficult to make a differential diagnosis among educable mentally retarded (EMR), emotionally…

"We May Give Advice but We Can Never Prompt Behavior": Lessons from Britain in Teaching Students Whose Behavior Causes Concern.

ERIC Educational Resources Information Center

Blake, Christopher, R. L.; Garner, Philip

This report focuses on teacher characteristics that enable teachers to work effectively with students with behavior disorders. A study was conducted that asked 60 British teachers, all of whom had some designated responsibilities for students with behavior problems, to identify a set of personal and professional characteristics which were most…

Resident Characteristics Related to the Lack of Morning Care Provision in Long-Term Care

ERIC Educational Resources Information Center

Simmons, Sandra F.; Durkin, Daniel W.; Rahman, Anna N.; Choi, Leena; Beuscher, Linda; Schnelle, John F.

2013-01-01

Purpose: The purpose of this study was to examine usual long-term care (LTC) practices related to 3 aspects of morning care and determine if there were resident characteristics related to the lack of care. Design and Methods: Participants were 169 long-stay residents in 4 community LTC facilities who required staff assistance with either transfer…

Characteristics of Children with Emotional and Behavioral Disorders in Community-Based Programs Designed to Prevent Placement in Residential Facilities.

ERIC Educational Resources Information Center

Epstein, Michael H.; And Others

1994-01-01

This study of risk characteristics of 100 Illinois children/adolescents with emotional/behavior disorders admitted to programs to prevent the need for residential placements found that most of the children were in single parent families; almost 85% had average or above average intelligence; and almost half were exposed to divorce, poverty,…

Conceptual design of reduced energy transports

NASA Technical Reports Server (NTRS)

Ardema, M. D.; Harper, M.; Smith, C. L.; Waters, M. H.; Williams, L. J.

1975-01-01

This paper reports the results of a conceptual design study of new, near-term fuel-conservative aircraft. A parametric study was made to determine the effects of cruise Mach number and fuel cost on the 'optimum' configuration characteristics and on economic performance. Supercritical wing technology and advanced engine cycles were assumed. For each design, the wing geometry was optimized to give maximum return on investment at a particular fuel cost. Based on the results of the parametric study, a reduced energy configuration was selected. Compared with existing transport designs, the reduced energy design has a higher aspect ratio wing with lower sweep, and cruises at a lower Mach number. It yields about 30% more seat-miles/gal than current wide-body aircraft. At the higher fuel costs anticipated in the future, the reduced energy design has about the same economic performance as existing designs.

A randomized controlled trial to evaluate the safety and efficacy of cardiac contractility modulation in patients with systolic heart failure: rationale, design, and baseline patient characteristics.

PubMed

Abraham, William T; Burkhoff, Daniel; Nademanee, Koonlawee; Carson, Peter; Bourge, Robert; Ellenbogen, Kenneth A; Parides, Michael; Kadish, Alan

2008-10-01

Cardiac contractility modulation (CCM) signals are nonexcitatory electrical signals delivered during the cardiac absolute refractory period that enhance the strength of cardiac muscular contraction. Prior research in experimental and human heart failure has shown that CCM signals normalize phosphorylation of key proteins and expression of genes coding for proteins involved in regulation of calcium cycling and contraction. The results of prior clinical studies of CCM have supported its safety and efficacy. A large-scale clinical study, the FIX-HF-5 study, is currently underway to test the safety and efficacy of this treatment. In this article, we provide an overview of the system used to deliver CCM signals, the implant procedure, and the details and rationale of the FIX-HF-5 study design. Baseline characteristics for patients randomized in this trial are also presented.

Water quality and habitat conditions in upper Midwest streams relative to riparian vegetation and soil characteristics, August 1997 : study design, methods, and data

USGS Publications Warehouse

Sorenson, S.K.; Porter, S.D.; Akers, K.B.; Harris, M.A.; Kalkhoff, S.J.; Lee, K.E.; Roberts, L.; Terrio, P.J.

1999-01-01

Water-chemistry, biological, and habitat data were collected from 70 sites on Midwestern streams during August 1997 as part of an integrated, regional water-quality assessment by the U.S. Geological Survey National Water-Quality Assessment (NAWQA) Program. The study area includes the Corn Belt region of southern Minnesota, eastern Iowa, and west-central Illinois, one of the most intensive and productive agricultural regions of the world. The focus of the study was to evaluate the condition of woodedriparian zones and the influence of basin soildrainage characteristics on water quality and biological-community responses. This report includes a description of the study design and site-characterization process, sample-collection and processing methods, laboratory methods, quality-assurance procedures, and summaries of data on nutrients, herbicides and metabolites, stream productivity and respiration, biological communities, habitat conditions, and agriculturalchemical and land-use information.

A Comparative Study of GDSS (Group Decision Support System) Use: Empirical Evidence and Model Design

DTIC Science & Technology

1987-09-01

G D SS ............................................... 67 APPENDIX A: ENERGY INTERNATIONAL CASE ...................... 69 APPENDIX B: QUESTIONNAIRE...the impact of many of the disadvantages. C. DESIRABLE CHARACTERISTICS OF A GDSS The designer of a GDSS must consider the major functional requirements...592]. Alter has stated that interaction with the GDSS is not the most important aspect of the system. Instead, designers should direct their energies

Application and Design Characteristics of Generalized Training Devices.

ERIC Educational Resources Information Center

Parker, Edward L.

This program identified applications and developed design characteristics for generalized training devices. The first of three sequential phases reviewed in detail new developments in Naval equipment technology that influence the design of maintenance training devices: solid-state circuitry, modularization, digital technology, standardization,…

De-embedding technique for accurate modeling of compact 3D MMIC CPW transmission lines

NASA Astrophysics Data System (ADS)

Pohan, U. H.; KKyabaggu, P. B.; Sinulingga, E. P.

2018-02-01

Requirement for high-density and high-functionality microwave and millimeter-wave circuits have led to the innovative circuit architectures such as three-dimensional multilayer MMICs. The major advantage of the multilayer techniques is that one can employ passive and active components based on CPW technology. In this work, MMIC Coplanar Waveguide(CPW)components such as Transmission Line (TL) are modeled in their 3D layouts. Main characteristics of CPWTL suffered from the probe pads’ parasitic and resonant frequency effects have been studied. By understanding the parasitic effects, then the novel de-embedding technique are developed accurately in order to predict high frequency characteristics of the designed MMICs. The novel de-embedding technique has shown to be critical in reducing the probe pad parasitic significantly from the model. As results, high frequency characteristics of the designed MMICs have been presented with minimumparasitic effects of the probe pads. The de-embedding process optimises the determination of main characteristics of Compact 3D MMIC CPW transmission lines.

Study of Theoretical and Numerical Fluid Characteristics of Plain Wing with Winglets

NASA Astrophysics Data System (ADS)

Nabhan, Mohamed B. W.

2018-05-01

Aerodynamic characteristics of plain wing designed for Light Sport Aircraft has been studied. The fluid characteristics include induced drag and lift to drag ratio. Then, winglets are added to reduce the induced drag and increase the lift to drag ratio which are affected by the wing tip vortices. The theoretical and numerical approaches are used to verify the results. A rectangular untwisted 9.528 m wing spans with an Airfoil NACA 4412 was used for the basic design. Winglets are added with a tip airfoil of NACA 0012, side angle of 65° and new projected area of 10.328 m2. Lift and drag coefficients are used as means to measure the improvement of the aerodynamic characteristics. The wing tip vortices increase the induced drag and spoil the lift over the wing's surface. The winglets design main objectives are to decrease the induced drag, decrease the fuel consumption, and increase the flight safety, especially in take-off condition. The wing with winglets model was simulated first using 3-D Fluent ANSYS version 14 at 50 m/s velocity and (0°, 5°, and 10°) angles of attack with laminar flow and standard atmospheric conditions at 15°C, and 101 kPa and all other flow parameters as well. The second verification method was to simulate the 3-D model using the 3-D Foil Multi-Surfaces code again with the same flow parameters. Finally, the last verification method was to solve the problem theoretically using the theoretical governing equations. The theoretical solutions were used as a base line for all other results. The total drag reduction observed from the calculation is about 2% to 14.5% during the takeoff regime, where the induced drag contributes about 60% of total drag of the wings. The lift to drag ratio improved also in our designed model wing with winglets by a maximum of 18.6% from the plain wing design.

Neighborhood socioeconomic deprivation characteristics in child (0-18 years) health studies: a review.

PubMed

van Vuuren, C Leontine; Reijneveld, Sijmen A; van der Wal, Marcel F; Verhoeff, Arnoud P

2014-09-01

Growing up in socioeconomically deprived neighborhoods has been shown to have negative health effects on children. However, the most recent review on which measures are used to investigate the association between neighborhood characteristics and child (0-18 year) health included studies only until 2004. Insight into more recent research is needed for the further development of these measures. To review neighborhood socioeconomic deprivation characteristics used in recent studies investigating the relationship between neighborhood socioeconomic deprivation and child health. Sensitive search in MEDLINE, Embase, PsycINFO, Sociological Abstracts databases (2004-2013). Ultimately, 19 studies were included. We found ten neighborhood socioeconomic deprivation constructs, of which income/wealth, employment, and education were most frequently used. The choice for neighborhood characteristics seemed independent of the health outcome and in most cases was not based on a specific theoretical background or earlier work. Studies vary regarding study designs, measures and outcomes. Researchers should clearly specify their choice of neighborhood socioeconomic deprivation characteristics; preferably, these should be theory-based and used consistently. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Kidney Outcomes Prediction and Evaluation (KOPE) study: a prospective cohort investigation of patients undergoing hemodialysis. Study design and baseline characteristics.

PubMed

Sevick, M A; Tell, G S; Shumaker, S A; Rocco, M V; Burkart, J M; Rushing, J T; Levine, D W; Chen, J; Bradham, D D; Pierce, J J; James, M K

1998-04-01

The purpose of the Kidney Outcomes Prediction and Evaluation (KOPE) study, was to more fully characterize the end-stage renal disease (ESRD) population with respect to social, psychological, and clinical characteristics, and to prospectively study the biomedical, social, and psychological factors that influence a range of ESRD outcomes in a large observational study of black and white patients on hemodialysis. This paper focuses on the KOPE study design as well as characteristics of patients at baseline. KOPE was a prospective cohort investigation of patients treated at four dialysis centers in Forsyth County, North Carolina. Participants were interviewed at the dialysis centers, semi-annually over a 3 1/2 year period. Prevalent cases who were being treated with hemodialysis at the initiation of the study were enrolled into KOPE. Incident cases were subsequently enrolled as they presented to the participating units for hemodialysis. A total of 304 prevalent and 162 incident cases were enrolled into the study. The baseline health and sociodemographic characteristics of KOPE participants reported in this paper were obtained from medical records and Southeast Kidney Council data. Laboratory values taken within a 30-day interval around the baseline interview are also reported. KOPE participants differ from national statistics on race, age, and gender. Differences between KOPE participants and patients living in the region, but who did not participate in the study, can be explained by our recruitment criteria. KOPE will enable the characterization of the ESRD population, identification of factors related to poor outcomes, and identification of opportunities for interventions to prevent death and morbidity.

The Conceptual Design for a Fuel Assembly of a New Research Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryu, J-S.; Cho, Y-G.; Yoon, D-B.

2004-10-06

A new Research Reactor (ARR) has been under design by KAERI since 2002. In this work, as a first step for the design of the fuel assembly of the ARR, the conceptual design has been carried out. The vibration characteristics of the tubular fuel model and the locking performance of the preliminary designed locking devices were investigated. In order to investigate the effects of the stiffener on the vibration characteristics of the tubular fuel, a modal analysis was performed for the finite element models of the tubular fuels with stiffeners and without stiffeners. The analysis results show that the vibrationmore » characteristics of the tubular fuel with stiffeners are better than those of the tubular fuel without stiffeners. To investigate the locking performance of the preliminary designed locking devices for the fuel assembly of the ARR, the elements of the locking devices were fabricated. Then the torsional resistance, fixing status and vibration characteristics of the locking devices were tested. The test results show that using the locking device with fins on the bottom guide can prevent the torsional motion of the fuel assembly, and that additional springs or guides on the top of the fuel assembly are needed to suppress the lateral motion of the fuel assembly. Based on the modal analysis and experimental results, the fuel assembly and locking devices of the ARR were designed and its prototype was fabricated. The locking performance, pressure drop characteristics and vibration characteristics of the newly designed fuel assembly will be tested in the near future.« less

10 CFR 430.27 - Petitions for waiver and applications for interim waiver.

Code of Federal Regulations, 2010 CFR

2010-01-01

... design characteristics which either prevent testing of the basic model according to the prescribed test... faucets, showerheads, water closets, and urinals) as to provide materially inaccurate comparative data. (2... particular basic model(s) for which a waiver is requested, the design characteristic(s) constituting the...

10 CFR 430.27 - Petitions for waiver and applications for interim waiver.

Code of Federal Regulations, 2011 CFR

2011-01-01

... design characteristics which either prevent testing of the basic model according to the prescribed test... faucets, showerheads, water closets, and urinals) as to provide materially inaccurate comparative data. (2... particular basic model(s) for which a waiver is requested, the design characteristic(s) constituting the...

Study of the application of hydrogen fuel to long-range subsonic transport aircraft. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Brewer, G. D.; Morris, R. E.; Lange, R. H.; Moore, J. W.

1975-01-01

The feasibility of using liquid hydrogen as fuel in advanced designs of long range, subsonic transport aircraft is assessed. Both passenger and cargo type aircraft are investigated. Comparisons of physical, performance, and economic parameters of the LH2 fueled designs with conventionally fueled aircraft are presented. Design studies are conducted to determine appropriate characteristics for the hydrogen related systems required on board the aircraft. These studies included consideration of material, structural, and thermodynamic requirements of the cryogenic fuel tanks and fuel systems with the structural support and thermal protection systems.

Design integration and noise studies for jet STOL aircraft. Task 7A: Augmentor wing cruise blowing valveless system. Volume 1: System design and test integration

NASA Technical Reports Server (NTRS)

Roepcke, F. A.; Nickson, T. B.

1973-01-01

Exploratory design studies conducted to establish the configuration of an augmentor wing vruise blowing (valveless) system in a 150-passenger STOL airplane were reported in NASA CR-114570. Those studies have been updated to incorporate the results of static rig, flow duct, and wind tunnel tests. Minor adjustments in duct flow velocity, flap length, and blowing nozzle geometry were incorporated to provide airplane characteristics that minimize takeoff gross weight and achieve sideline noise objectives for an advanced commercial STOL airplane.

Systematic review of acute physically active learning and classroom movement breaks on children's physical activity, cognition, academic performance and classroom behaviour: understanding critical design features.

PubMed

Daly-Smith, Andy J; Zwolinsky, Stephen; McKenna, Jim; Tomporowski, Phillip D; Defeyter, Margaret Anne; Manley, Andrew

2018-01-01

To examine the impact of acute classroom movement break (CMB) and physically active learning (PAL) interventions on physical activity (PA), cognition, academic performance and classroom behaviour. Systematic review. PubMed, EBSCO, Academic Search Complete, Education Resources Information Center, PsycINFO, SPORTDiscus, SCOPUS and Web of Science. Studies investigating school-based acute bouts of CMB or PAL on (PA), cognition, academic performance and classroom behaviour. The Downs and Black checklist assessed risk of bias. Ten PAL and eight CMB studies were identified from 2929 potentially relevant articles. Risk of bias scores ranged from 33% to 64.3%. Variation in study designs drove specific, but differing, outcomes. Three studies assessed PA using objective measures. Interventions replaced sedentary time with either light PA or moderate-to-vigorous PA dependent on design characteristics (mode, duration and intensity). Only one study factored individual PA outcomes into analyses. Classroom behaviour improved after longer moderate-to-vigorous (>10 min), or shorter more intense (5 min), CMB/PAL bouts (9 out of 11 interventions). There was no support for enhanced cognition or academic performance due to limited repeated studies. Low-to-medium quality designs predominate in investigations of the acute impacts of CMB and PAL on PA, cognition, academic performance and classroom behaviour. Variable quality in experimental designs, outcome measures and intervention characteristics impact outcomes making conclusions problematic. CMB and PAL increased PA and enhanced time on task. To improve confidence in study outcomes, future investigations should combine examples of good practice observed in current studies. CRD42017070981.

Priority issues, study designs and geographical distribution in nutrition journals.

PubMed

Ortiz-Moncada, R; González-Zapata, L; Ruiz-Cantero, M T; Clemente-Gómez, V

2011-01-01

The increased number of articles published in nutrition is a reflection of the relevance to scientific community. The characteristics and quality of nutritional studies determine whether readers can obtain valid conclusions from them, as well as their usefulness for evidence-based strategic policies. To determine the characteristics of papers published in nutrition journals. Descriptive study design. We reviewed 330 original papers published between January-June 2007. From: American Journal of Clinical Nutrition (AJCN), Journal of Nutrition, European Journal Nutrition, European Journal of Clinical Nutrition and Public Health Nutrition. We classified them according to the subjects studied; risk factors, study design and country of origin. Almost half the papers studied healthy people (53.3%). The most frequent illness was obesity (13.9%). Food consumption is the most frequent risk factor (63.3%). Social factors appear exclusively only in 3.6% of the papers. Clinical trials were the most common analytical design (31.8%), mainly in the AJCN (45.6%). Cross-sectional studies were the most frequent type of observational design (37.9%). Ten countries produced over half of the papers (51.3%). The US publishes the highest number of papers (20.6%), whilst developing countries make only scarce contributions to scientific literature on nutrition. Most of the papers had inferential power. They generally studied both healthy and sick subjects, coinciding with the aims of international scientific policies. However, the topics covered reflect a clear bias, prioritizing problems pertaining to developed countries. Social determinants of health should also be considered, along with behavioral and biological risk factors.

Development of a morphing flap using shape memory alloy actuators: the aerodynamic characteristics of a morphing flap

NASA Astrophysics Data System (ADS)

Ko, Seung-Hee; Bae, Jae-Sung; Rho, Jin-Ho

2014-07-01

The discontinuous contour of a wing with conventional flaps diminishes the aerodynamic performance of an aircraft. A wing with a continuous contour does not experience extreme flow stream fluctuations during flight, and consequently has good aerodynamic characteristics. In this study, a morphing flap using shape memory alloy actuators is proposed, designed and fabricated, and its aerodynamic characteristics are investigated using aerodynamic analyses and wind tunnel tests. The ribs of the morphing flap are designed and fabricated with multiple elements joined together in a way that allows relative rotations of adjacent elements and forms a smooth contour of the morphing flap. The aerodynamic analyses of this multiple-element morphing-flap wing are performed using XFLR pro; its aerodynamic performance is compared with that of a mechanical-flap wing, and is measured through wind-tunnel tests.

Early Childhood Longitudinal Study-Kindergarten Class of 1998-99 (ECLS-K), Psychometric Report for Kindergarten through First Grade. NCES Working Paper No. 2002-05

ERIC Educational Resources Information Center

Rock, Donald A.; Pollack, Judith M.

2002-01-01

This report documents the design, development, and psychometric characteristics of the assessment instruments used in the Early Childhood Longitudinal Study-Kindergarten Class of 1998-99 (ECLS-K). The ECLS-K is sponsored by the U.S. Department of Education, National Center for Education Statistics. The ECLS-K was designed to assess the…

Hierarchical Thinking: A Cognitive Tool for Guiding Coherent Decision Making in Design Problem Solving

ERIC Educational Resources Information Center

Haupt, Grietjie

2018-01-01

This paper builds on two concepts, the first of which is the extended information processing model of expert design cognition. This proposes twelve internal psychological characteristics interacting with the external world of expert designers during the early phases of the design process. Here, I explore one of the characteristics, hierarchical…

A trial like ALIC4E: why design a platform, response-adaptive, open, randomised controlled trial of antivirals for influenza-like illness?

PubMed Central

Butler, Christopher C.; Coenen, Samuel; Saville, Benjamin R.; Cook, Johanna; van der Velden, Alike; Homes, Jane; de Jong, Menno; Little, Paul; Goossens, Herman; Ieven, Margareta; Francis, Nick; Moons, Pieter; Bongard, Emily; Verheij, Theo

2018-01-01

ALIC4E is the first publicly funded, multicountry, pragmatic study determining whether antivirals should be routinely prescribed for influenza-like illness in primary care. The trial aims to go beyond determining the average treatment effect in a population to determining effects in patients with combinations of participant characteristics (age, symptom duration, illness severity, and comorbidities). It is one of the first platform, response-adaptive, open trial designs implemented in primary care, and this article aims to provide an accessible description of key aspects of the study design. 1) The platform design allows the study to remain relevant to evolving circumstances, with the ability to add treatment arms. 2) Response adaptation allows the proportion of participants with key characteristics allocated to study arms to be altered during the course of the trial according to emerging outcome data, so that participants' information will be most useful, and increasing their chances of receiving the trial intervention that will be most effective for them. 3) Because the possibility of taking placebos influences participant expectations about their treatment, and determining effects of the interventions on patient help seeking and adherence behaviour in real-world care is critical to estimates of cost-effectiveness, ALIC4E is an open-label trial. PMID:29761108

Trauma systems and the costs of trauma care.

PubMed Central

Goldfarb, M G; Bazzoli, G J; Coffey, R M

1996-01-01

OBJECTIVE. This study examines the cost of providing trauma services in trauma centers organized by publicly administered trauma systems, compared to hospitals not part of a formal trauma system. DATA SOURCES AND STUDY SETTING. Secondary administrative discharge abstracts for a national sample of severely injured trauma patients in 44 trauma centers and 60 matched control hospitals for the year 1987 were used. STUDY DESIGN. Retrospective univariate and multivariate analyses were conducted to examine the impact of formal trauma systems and trauma center designation on the costs of treating trauma patients. Key dependent variables included length of stay, charge per day per patient, and charge per hospital stay. Key impact variables were type of trauma system and level of trauma designation. Control variables included patient, hospital, and community characteristics. DATA COLLECTION/EXTRACTION METHODS. Data were selected for hospitals based on (1) a large national hospital discharge database, the Hospital Cost and Utilization Project, 1980-1987 (HCUP-2) and (2) a special survey of trauma systems and trauma designation undertaken by the Hospital Research and Educational Trust of the American Hospital Association. PRINCIPAL FINDINGS. The results show that publicly designated Level I trauma centers, which are the focal point of most trauma systems, have the highest charge per case, the highest average charge per day, and similar or longer average lengths of stay than other hospitals. These findings persist after controlling for patient injury and health status, and for demographic characteristics and hospital and community characteristics. CONCLUSIONS. Prior research shows that severely injured trauma patients have greater chances of survival when treated in specialized trauma centers. However, findings here should be of concern to the many states developing trauma systems since the high costs of Level I centers support limiting the number of centers designated at this level and/or reconsidering the requirements placed on these centers. PMID:8617611

Determination of channel-morphology characteristics, bankfull discharge, and various design-peak discharges in western Montana

USGS Publications Warehouse

Lawlor, Sean M.

2004-01-01

Stream-restoration projects using natural stream designs typically are based on channel configurations that can accommodate a wide range of streamflow and sediment-transport conditions without excessive erosion or deposition. Bankfull discharge is an index of streamflow considered to be closely related to channel shape, size, and slope (channel morphology). Because of the need for more information about the relation between channel morphology and bankfull discharge, the U.S. Geological Survey (USGS), in cooperation with the Montana Department of Transportation and the U.S. Department of Agriculture-Lolo National Forest, conducted a study to collect channel-morphology and bankfull-discharge data at gaged sites and use these data to improve current (2004) methods of estimation of bankfull discharge and various design-peak discharges at ungaged sites. This report presents channel-morphology characteristics, bankfull discharge, and various design-peak discharges for 41 sites in western Montana. Channel shape, size, and slope and bankfull discharge were determined at 41 active or discontinued USGS streamflow-gaging sites in western Montana. The recurrence interval for the bankfull discharge for this study ranged from 1.0 to 4.4 years with a median value of 1.5 years. The relations between channel-morphology characteristics and various design-peak discharges were examined using regression analysis. The analyses showed that the only characteristics that were significant for all peak discharges were either bankfull width or bankfull cross-sectional area. Bankfull discharge at ungaged sites in most of the study area can be estimated by application of a multiplier after determining the 2-year peak discharge at the ungaged site. The multiplier, which is the ratio of bankfull discharge to the 2-year peak discharge determined at the 41 sites, ranged from 0.21 to 3.7 with a median value of 0.84. Regression relations between bankfull discharge and drainage area and between bankfull width and drainage area were examined for three ranges of mean annual precipitation. The results of the regression analyses indicated that both drainage area and mean annual precipitation were significantly related (p values less than 0.05) to bankfull discharge.

Proceedings of the Conference on the Design of Experiments in Army Research Development and Testing (28th) Held at Monterey, California on 20-22 October 1982

DTIC Science & Technology

1983-06-01

program specifically designed to solve IME equations. The IME measure is a useful index because it translates system performance characteristics of...8.0 SUMMARY The purpose of this study was to design the field evaluation of a camou- flage system in such a manner that the camoufleur could...analysis of complex factorial designs and their associated systems of confounding ((44), [46)) and to the introduction of incomplete block designs . My

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 4: IPAD system design

NASA Technical Reports Server (NTRS)

Goldfarb, W.; Carpenter, L. C.; Redhed, D. D.; Hansen, S. D.; Anderson, L. O.; Kawaguchi, A. S.

1973-01-01

The computing system design of IPAD is described and the requirements which form the basis for the system design are discussed. The system is presented in terms of a functional design description and technical design specifications. The functional design specifications give the detailed description of the system design using top-down structured programming methodology. Human behavioral characteristics, which specify the system design at the user interface, security considerations, and standards for system design, implementation, and maintenance are also part of the technical design specifications. Detailed specifications of the two most common computing system types in use by the major aerospace companies which could support the IPAD system design are presented. The report of a study to investigate migration of IPAD software between the two candidate 3rd generation host computing systems and from these systems to a 4th generation system is included.

A Method of the UMTS-FDD Network Design Based on Universal Load Characteristics

NASA Astrophysics Data System (ADS)

Gajewski, Slawomir

In the paper an original method of the UMTS radio network design was presented. The method is based on simple way of capacity-coverage trade-off estimation for WCDMA/FDD radio interface. This trade-off is estimated by using universal load characteristics and normalized coverage characteristics. The characteristics are useful for any propagation environment as well as for any service performance requirements. The practical applications of these characteristics on radio network planning and maintenance were described.

Design of a receiver operating characteristic (ROC) study of 10:1 lossy image compression

NASA Astrophysics Data System (ADS)

Collins, Cary A.; Lane, David; Frank, Mark S.; Hardy, Michael E.; Haynor, David R.; Smith, Donald V.; Parker, James E.; Bender, Gregory N.; Kim, Yongmin

1994-04-01

The digital archiving system at Madigan Army Medical Center (MAMC) uses a 10:1 lossy data compression algorithm for most forms of computed radiography. A systematic study on the potential effect of lossy image compression on patient care has been initiated with a series of studies focused on specific diagnostic tasks. The studies are based upon the receiver operating characteristic (ROC) method of analysis for diagnostic systems. The null hypothesis is that observer performance with approximately 10:1 compressed and decompressed images is not different from using original, uncompressed images for detecting subtle pathologic findings seen on computed radiographs of bone, chest, or abdomen, when viewed on a high-resolution monitor. Our design involves collecting cases from eight pathologic categories. Truth is determined by committee using confirmatory studies performed during routine clinical practice whenever possible. Software has been developed to aid in case collection and to allow reading of the cases for the study using stand-alone Siemens Litebox workstations. Data analysis uses two methods, ROC analysis and free-response ROC (FROC) methods. This study will be one of the largest ROC/FROC studies of its kind and could benefit clinical radiology practice using PACS technology. The study design and results from a pilot FROC study are presented.

The role of audience characteristics and external factors in continuing medical education and physician change: effectiveness of continuing medical education: American College of Chest Physicians Evidence-Based Educational Guidelines.

PubMed

Lowe, Mary Martin; Bennett, Nancy; Aparicio, Alejandro

2009-03-01

The Agency for Healthcare Research and Quality (AHRQ) Evidence Report identified and assessed audience characteristics (internal factors) and external factors that influence the effectiveness of continuing medical education (CME) in changing physician behavior. Thirteen studies examined a series of CME audience characteristics (internal factors), and six studies looked at external factors to reinforce the effects of CME in changing behavior. With regard to CME audience characteristics, the 13 studies examined age, gender, practice setting, years in practice, specialty, foreign vs US medical graduate, country of practice, personal motivation, nonmonetary rewards and motivations, learning satisfaction, and knowledge enhancement. With regard to the external characteristics, the six studies looked at the role of regulation, state licensing boards, professional boards, hospital credentialing, external audits, monetary and financial rewards, academic advancement, provision of tools, public demand and expectations, and CME credit. No consistent findings were identified. The AHRQ Evidence Report provides no conclusions about the ways that internal or external factors influence CME effectiveness in changing physician behavior. However, given what is known about how individuals approach learning, it is likely that internal factors play an important role in the design of effective CME. Regulatory and professional organizations are providing new structures, mandates, and recommendations for CME activities that influence the way CME providers design and present activities, supporting a role that is not yet clear for external factors. More research is needed to understand the impact of these factors in enhancing the effectiveness of CME.

Recruiting Black Americans in a Large Cohort Study: The Adventist Health Study-2 (AHS-2) Design, Methods and Participant Characteristics

PubMed Central

Herring, R. Patti; Butler, Terry; Hall, Sonja; Montgomery, Susanne B.; Fraser, Gary E.

2011-01-01

Objective The goal of the prospective Adventist Health Study-2 (AHS-2) was to examine the relationship between diet and risk of breast, prostate and colon cancers in Black and White participants. This paper describes the study design, recruitment methods, response rates, and characteristics of Blacks in the AHS-2, thus providing insights about effective strategies to recruit Blacks to participate in research studies. Design We designed a church-based recruitment model and trained local recruiters who used various strategies to recruit participants in their churches. Participants completed a 50-page self-administered dietary and lifestyle questionnaire. Participants Participants are Black Seventh-day Adventists, aged 30–109 years, and members of 1,209 Black churches throughout the United States and Canada. Results Approximately 48,328 Blacks from an estimated target group of over 90,000 signed up for the study and 25,087 completed the questionnaire, comprising about 26% of the larger 97,000 AHS-2-member cohort. Participants were diverse in age, geographic location, education, and income. Seventy percent were female with a median age of 59 years. Conclusion In spite of many recruitment challenges and barriers, we successfully recruited a large cohort whose data should provide some answers as to why Blacks have poorer health outcomes than several other ethnic groups, and help explain existing health disparities. PMID:21305834

Lunar base launch and landing facility conceptual design, 2nd edition

NASA Technical Reports Server (NTRS)

1988-01-01

This report documents the Lunar Base Launch and Landing Facility Conceptual Design study. The purpose of this study was to examine the requirements for launch and landing facilities for early lunar bases and to prepare conceptual designs for some of these facilities. The emphasis of this study is on the facilities needed from the first manned landing until permanent occupancy. Surface characteristics and flight vehicle interactions are described, and various facility operations are related. Specific recommendations for equipment, facilities, and evolutionary planning are made, and effects of different aspects of lunar development scenarios on facilities and operations are detailed. Finally, for a given scenario, a specific conceptual design is developed and presented.

Determinants of innovation within health care organizations: literature review and Delphi study.

PubMed

Fleuren, Margot; Wiefferink, Karin; Paulussen, Theo

2004-04-01

When introducing innovations to health care, it is important to gain insight into determinants that may facilitate or impede the introduction, in order to design an appropriate strategy for introducing the innovation. To obtain an overview of determinants of innovations in health care organizations, we carried out a literature review and a Delphi study. The Delphi study was intended to achieve consensus among a group of implementation experts on determinants identified from the literature review. We searched 11 databases for articles published between 1990 and 2000. The keywords varied according to the specific database. We also searched for free text. Forty-four implementation experts (implementation researchers, programme managers, and implementation consultants/advisors) participated in the Delphi study. The following studies were selected: (i) studies describing innovation processes, and determinants thereof, in health care organizations; (ii) studies where the aim of the innovations was to change the behaviour of health professionals; (iii) studies where the health care organizations provided direct patient care; and (iv) studies where only empirical studies were included. Two researchers independently selected the abstracts and analysed the articles. The determinants were divided into four categories: characteristics of the environment, characteristics of the organization, characteristics of the user (health professional), and characteristics of the innovation. When analysing the determinants, a distinction was made between systematically designed and non-systematically designed studies. In a systematic study, a determinant analysis was performed and the innovation strategy was adapted to these determinants. Furthermore, the determinants were associated with the degree of implementation, and both users and non-users of the innovation were asked about possible determinants. In the Delphi study, consensus was defined as agreement among 75% of the experts on both the influence of a determinant and the direction towards which that influence tended (i.e. facilitating, impeding, or neutral). From the initial 2239 abstracts, 57 studies were retrieved and 49 determinants were identified that affected (impeded or facilitated) the innovation process. The experts identified one other determinant. Seventeen studies had a more-or-less systematic design; the others did not. After three rounds, consensus was reached on the influence of 49 out of 50 determinants. The results of the literature review matched those found in the Delphi study, and 50 potentially relevant determinants of innovation processes were identified. Many of the innovation studies had several methodological flaws, such as not adjusting innovation strategies to relevant determinants of the innovation process, or that data on determinants were gathered only from non-users. Furthermore, the degree of implementation was evaluated in several ways, which made comparison difficult.

Performance analysis of a coherent free space optical communication system based on experiment.

PubMed

Cao, Jingtai; Zhao, Xiaohui; Liu, Wei; Gu, Haijun

2017-06-26

Based on our previous study and designed experimental AO system with a 97-element continuous surface deformable mirror, we conduct the performance analysis of a coherent free space optical communication (FSOC) system for mixing efficiency (ME), bit error rate (BER) and outage probability under different Greenwood frequency and atmospheric coherent length. The results show that the influence of the atmospheric temporal characteristics on the performance is slightly stronger than that of the spatial characteristics when the receiving aperture and the number of sub-apertures are given. This analysis result provides a reference for the design of the coherent FSOC system.

A comparison of the accuracy of the smart sock system to force platform and optical system for measurement of temporal parameters of locomotion

NASA Astrophysics Data System (ADS)

Oks, A.; Katashev, A.; Bernans, E.; Abolins, V.

2017-10-01

The aim of the study was to present a new DAid®Pressure Sock System for feet locomotion monitoring and to verify it’s temporal characteristics by data comparison with the same obtained by two other widely used methods as reference. Designed system is based on sensors which can be knitted directly in the garment or hosiery items. DAid®Pressure Sock System was created for sport and medical applications. Comparison of temporal characteristics of different types of locomotion, obtained using designed system and reference devises, showed good agreement between data.

Assessment of burning characteristics of aircraft interior materials

NASA Technical Reports Server (NTRS)

Grand, A. F.; Valys, A. J.

1981-01-01

The performance of a series of seat cushion design constructions was compared based on their heat and smoke release characteristics. Tests were conducted in a room size calorimeter instrumented for measuring weight loss, rate of heat release, smoke and volatile decomposition products and the cumulative energy release. Baseline data were obtained from burn tests conducted on commercial airline salvage sets as a comparison with more advanced seat designs. A toxicological assessment of smoke and fire gases involved the exposure of test animals and their biological responses ascertained. Relative toxicological hazards of the combustion gases are discussed based on the animal response studies and the analysis of the combustion gases.

Multi-band phase shifter design using modified slotline configuration

NASA Astrophysics Data System (ADS)

Kulandhaisamy, Indhumathi; Rajendran, Dinesh Babu; Kanagasabai, Malathi; Gurusamy, Gunasekaran; Moorthy, Balaji; George, Jithila V.; Lawrance, Livya

2017-01-01

In this paper, an analog multiband phase shifter using slotline configuration is proposed. To implement the design, a pair of modified Split Ring Resonator (SRR) is employed. The periodic property of SRR provides multiband characteristics, whether the coupling slot gives the phase variations over the bands. The operation is well explained with an equivalent circuit model and its characteristics have been studied both in simulation and measurement. The prototype operates in 1.77-2.16, 3.5-3.97, 5.08-5.33, 6.43-6.93, and 8.01-8.59 GHz frequency bands which can be utilized for GSM, GPS, WLAN, C-band, and X-band applications, respectively.

Aerodynamic characteristics of the 10-percent-thick NASA supercritical airfoil 33 designed for a normal-force coefficient of 0.7

NASA Technical Reports Server (NTRS)

Harris, C. D.

1975-01-01

A 10-percent-thick supercritical airfoil based on an off-design sonic-pressure plateau criterion was developed and experimental aerodynamic characteristics measured. The airfoil had a design normal-force coefficient of 0.7 and was identified as supercritical airfoil 33. Results show the airfoil to have good drag rise characteristics over a wide range of normal-force coefficients with no measurable shock losses up to the Mach numbers at which drag divergence occurred for normal-force coefficients up to 0.7. Comparisons of experimental and theoretical characteristics were made and composite drag rise characteristics were derived for normal-force coefficients of 0.5 and 0.7 and a Reynolds number of 40 million.

Tactical radar technology study. Volume 1: Executive summary

NASA Astrophysics Data System (ADS)

Rosien, R.; Cardone, L.; Hammers, D.; Klein, A.; Nozawa, E.

1980-03-01

This report presents results of a study to identify new technology required to provide advanced multi-threat performance capabilities in future tactical surveillance radar designs. A baseline design with optional subsystem characteristics has been synthesized to provide both functional and operational survivability in a dynamic and hostile situation postulated for the post 1985 time frame. Comparisons have been made of available technology with that required by the new baseline design to identify new technology requirements. Recommendations are presented for critical new technology programs including estimates of technical risks, costs and required development time.

Studies of scramjet/airframe integration techniques for hypersonic aircraft

NASA Technical Reports Server (NTRS)

Edwards, C. L. W.; Small, W. J.; Weidner, J. P.; Johnston, P. J.

1975-01-01

New design and analysis techniques for engine-airframe integration were applied in a recent hypersonic vehicle design study. A new technique was developed to design the vehicle's forebody so that uniform precompressed flow was produced at the inlet entrance. Results are verified with three-dimensional characteristic calculations. Results from a new three-dimensional method for calculating nozzle flows show that the entire lower afterbody of the vehicle can be used as a scramjet exhaust nozzle to achieve efficient, controlled, and stable flight over a wide range of flight conditions.

"Their Packaging Has Always Been Like a Power": A Qualitative Study of U.S. Smokers' Perceptions of Cigarette Pack Visual Design Features to Inform Product Regulation.

PubMed

Lee, Joseph G L; Averett, Paige E; Blanchflower, Tiffany; Landi, Nunzio; Gregory, Kyle R

2017-10-17

Cigarette packaging matters to consumer behavior. However, it is less clear which changes to packaging design would be salient for adult smokers. Such information is critically important to regulators in the United States who are charged with reviewing new tobacco products for their impact on population health. In this qualitative study, U.S. adult smokers ( n = 33) participated in six telephone-based focus groups in March 2017. Separate groups were comprised of lesbian, gay, and bisexual (LGB) participants; participants with less than four years of post-secondary education; a mix of LGB and straight participants; and, the general population. All groups were purposely selected for diversity. Open thematic coding identified salient design elements used on cigarette packaging. Smokers articulated design elements' use, meaning, and links with consumer behaviors. Three themes were identified: (1) the power of color, (2) supporting color with other design elements (e.g., logos/images, typography, the pack itself), and (3) the combined product brand experience of multiple design elements. Participants linked design elements to product characteristics and to consumer behavior (e.g., purchase). As the Food and Drug Administration is charged with regulating tobacco products, these findings suggest the importance of considering the cigarette pack part of the characteristics of a product.

“Their Packaging Has Always Been Like a Power”: A Qualitative Study of U.S. Smokers’ Perceptions of Cigarette Pack Visual Design Features to Inform Product Regulation

PubMed Central

Blanchflower, Tiffany; Landi, Nunzio; Gregory, Kyle R.

2017-01-01

Cigarette packaging matters to consumer behavior. However, it is less clear which changes to packaging design would be salient for adult smokers. Such information is critically important to regulators in the United States who are charged with reviewing new tobacco products for their impact on population health. In this qualitative study, U.S. adult smokers (n = 33) participated in six telephone-based focus groups in March 2017. Separate groups were comprised of lesbian, gay, and bisexual (LGB) participants; participants with less than four years of post-secondary education; a mix of LGB and straight participants; and, the general population. All groups were purposely selected for diversity. Open thematic coding identified salient design elements used on cigarette packaging. Smokers articulated design elements’ use, meaning, and links with consumer behaviors. Three themes were identified: (1) the power of color, (2) supporting color with other design elements (e.g., logos/images, typography, the pack itself), and (3) the combined product brand experience of multiple design elements. Participants linked design elements to product characteristics and to consumer behavior (e.g., purchase). As the Food and Drug Administration is charged with regulating tobacco products, these findings suggest the importance of considering the cigarette pack part of the characteristics of a product. PMID:29039769

Configuration evaluation and criteria plan. Volume 1: System trades study and design methodology plan (preliminary). Space Transportation Main Engine (STME) configuration study

NASA Technical Reports Server (NTRS)

Bair, E. K.

1986-01-01

The System Trades Study and Design Methodology Plan is used to conduct trade studies to define the combination of Space Shuttle Main Engine features that will optimize candidate engine configurations. This is accomplished by using vehicle sensitivities and engine parametric data to establish engine chamber pressure and area ratio design points for candidate engine configurations. Engineering analyses are to be conducted to refine and optimize the candidate configurations at their design points. The optimized engine data and characteristics are then evaluated and compared against other candidates being considered. The Evaluation Criteria Plan is then used to compare and rank the optimized engine configurations on the basis of cost.

Low Carbon Design Research on the Space Layout Types of Office Buildings

NASA Astrophysics Data System (ADS)

Xia, Bing

2018-01-01

It is beneficial to find out the relationship of the spatial layout and low-carbon design in order to reduce buildings’ carbon emissions in the conceptual design phase. This paper analyzes and compares shape coefficient values, annual energy consumption and lighting performance of office buildings of different space layout types in Shanghai. Based on morphological characteristics of different types, the study also analyzes and presents low-carbon design strategies for each single type. This study assumes that architects should conduct passive and active design according to the specific building space layout, so that to make best use of the advantages and bypassing the disadvantages, in order to maximally reduce buildings’ carbon emissions.

Preliminary Study of a Piston Pump for Cryogenic Fluids

NASA Technical Reports Server (NTRS)

Biermann, Arnold E.; Kohl, Robert C.

1959-01-01

Preliminary data are presented covering the performance of a low-speed, five-cylinder piston pump designed for handling boiling hydrogen. This pump was designed for a flow of 55 gallons per minute at 240 rpm with a discharge pressure of 135 pounds per square inch. Tests were made using JP-4 fuel, liquid nitrogen, and liquid hydrogen. Pump delivery and endurance characteristics were satisfactory for the range of operation covered. In connection with the foregoing pump development, the cavitation characteristics of a preliminary visual model, glass-cylinder pump and of a simple reciprocating disk were studied. Subcooling of approximately 0.60 F was obtained from the cavitation produced by reciprocating a disk in boiling nitrogen and in boiling water. The subcooling obtained in a similar manner with liquid hydrogen was somewhat less.

Experimental Analysis of Steady-State Maneuvering Effects on Transmission Vibration Patterns Recorded in an AH-1 Cobra Helicopter

NASA Technical Reports Server (NTRS)

Huff, Edward M.; Dzwonczyk, Mark; Norvig, Peter (Technical Monitor)

2000-01-01

Flight experiment was designed primarily to determine the extent to which steady-state maneuvers influence characteristic vibration patterns measured at the input pinion and output annulus gear locations of the main transmission. If results were to indicate that maneuvers systematically influence vibration patterns, more extensive studies would be planned to explore the response surface. It was also designed to collect baseline data for comparison with experimental data to be recorded at a later date from test stands at Glenn Research Center. Finally, because this was the first vibration flight study on the Cobra aircraft, considerable energy was invested in developing an in-flight recording apparatus, as well as exploring acceleration mounting methods, and generally learning about the overall vibratory characteristics of the aircraft itself.

Results of design studies and wind tunnel tests of an advanced high lift system for an Energy Efficient Transport

NASA Technical Reports Server (NTRS)

Oliver, W. R.

1980-01-01

The development of an advanced technology high lift system for an energy efficient transport incorporating a high aspect ratio supercritical wing is described. This development is based on the results of trade studies to select the high lift system, analysis techniques utilized to design the high lift system, and results of a wind tunnel test program. The program included the first experimental low speed, high Reynolds number wind tunnel test for this class of aircraft. The experimental results include the effects on low speed aerodynamic characteristics of various leading and trailing edge devices, nacelles and pylons, aileron, spoilers, and Mach and Reynolds numbers. Results are discussed and compared with the experimental data and the various aerodynamic characteristics are estimated.

The design and characterization of a digital optical breast cancer imaging system.

PubMed

Flexman, Molly L; Li, Yang; Bur, Andres M; Fong, Christopher J; Masciotti, James M; Al Abdi, Rabah; Barbour, Randall L; Hielscher, Andreas H

2008-01-01

Optical imaging has the potential to play a major role in breast cancer screening and diagnosis due to its ability to image cancer characteristics such as angiogenesis and hypoxia. A promising approach to evaluate and quantify these characteristics is to perform dynamic imaging studies in which one monitors the hemodynamic response to an external stimulus, such as a valsalva maneuver. It has been shown that the response to such stimuli shows MARKED differences between cancerous and healthy tissues. The fast imaging rates and large dynamic range of digital devices makes them ideal for this type of imaging studies. Here we present a digital optical tomography system designed specifically for dynamic breast imaging. The instrument uses laser diodes at 4 different near-infrared wavelengths with 32 sources and 128 silicon photodiode detectors.

Effect of HPMC - E15 LV premium polymer on release profile and compression characteristics of chitosan/ pectin colon targeted mesalamine matrix tablets and in vitro study on effect of pH impact on the drug release profile.

PubMed

Newton, A M J; Lakshmanan, Prabakaran

2014-04-01

The study was designed to investigate the in vitro dissolution profile and compression characteristics of colon targeted matrix tablets prepared with HPMC E15 LV in combination with pectin and Chitosan. The matrix tablets were subjected to two dissolution models in various simulated fluids such as pH 1.2, 6, 6.8, 7.2, 5.5. The fluctuations in colonic pH conditions during IBD (inflammatory bowel disease) and the nature of less fluid content in the colon may limit the expected drug release in the polysaccharide-based matrices when used alone. The Hydrophilic hydroxyl propyl methylcellulose ether premium polymer (HPMC E15 LV) of low viscosity grade was used in the formulation design, which made an excellent modification in physical and compression characteristics of the granules. The release studies indicated that the prepared matrices could control the drug release until the dosage form reaches the colon and the addition HPMC E15 LV showed the desirable changes in the dissolution profile by its hydrophilic nature since the colon is known for its less fluid content. The hydrophilic HPMC E15 LV allowed the colonic fluids to enter into the matrix and confirmed the drug release at the target site from a poorly water soluble polymer such as Chitosan and also from water soluble Pectin. The dramatic changes occurred in the drug release profile and physicochemical characteristics of the Pectin, Chitosan matrix tablets when a premium polymer HPMC E15 LV added in the formulation design in the optimized concentration. Various drug release mechanisms used for the examination of drug release characteristics. Drug release followed the combined mechanism of diffusion, erosion, swelling and polymer entanglement. In recent decade, IBD attracts many patents in novel treatment methods by using novel drug delivery systems.

An experimental investigation of the effects of alarm processing and display on operator performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Hara, J.; Brown, W.; Hallbert, B.

1998-03-01

This paper describes a research program sponsored by the US Nuclear Regulatory Commission to address the human factors engineering (HFE) aspects of nuclear power plant alarm systems. The overall objective of the program is to develop HFE review guidance for advanced alarm systems. As part of this program, guidance has been developed based on a broad base of technical and research literature. In the course of guidance development, aspects of alarm system design for which the technical basis was insufficient to support complete guidance development were identified. The primary purpose of the research reported in this paper was to evaluatemore » the effects of three of these alarm system design characteristics on operator performance in order to contribute to the understanding of potential safety issues and to provide data to support the development of design review guidance in these areas. Three alarm system design characteristics studied were (1) alarm processing (degree of alarm reduction), (2) alarm availability (dynamic prioritization and suppression), and (3) alarm display (a dedicated tile format, a mixed tile and message list format, and a format in which alarm information is integrated into the process displays). A secondary purpose was to provide confirmatory evidence of selected alarm system guidance developed in an earlier phase of the project. The alarm characteristics were combined into eight separate experimental conditions. Six, two-person crews of professional nuclear power plant operators participated in the study. Following training, each crew completed 16 test trials which consisted of two trials in each of the eight experimental conditions (one with a low-complexity scenario and one with a high-complexity scenario). Measures of process performance, operator task performance, situation awareness, and workload were obtained. In addition, operator opinions and evaluations of the alarm processing and display conditions were collected. No deficient performance was observed in any of the experimental conditions, providing confirmatory support for many design review guidelines. The operators identified numerous strengths and weaknesses associated with individual alarm design characteristics.« less

Determination of Flaw Growth Characteristics of Ti-6Al-4V Sheet in the Solution-Treated and Aged Condition

NASA Technical Reports Server (NTRS)

Hoeppner, David W.; Pettit, Donald E.; Feddersen, Charles E.; Hyler, Walter S.

1968-01-01

The specific experimental investigation undertaken was designed to answer these questions on Ti-6Al-4V in the solution treated and aged condition. The defect growth and fracture characteristics were studied in parent (unwelded) and welded sheet material. The results of the study indicate that cryogenic proof testing will screen smaller size defects than proof testing at ambient conditions. However some unusual crack growth behavior during the proof test simulation suggests that some further study be made of stress and time duration effects.

Theoretical studies on effective metal-to-ligand charge transfer characteristics of novel ruthenium dyes for dye sensitized solar cells.

PubMed

Wang, Huei-Tang; Taufany, Fadlilatul; Nachimuthu, Santhanamoorthi; Jiang, Jyh-Chiang

2014-05-01

The development of ruthenium dye-sensitizers with highly effective metal-to-ligand charge transfer (MLCT) characteristics and narrowed transition energy gaps are essential for the new generation of dye-sensitized solar cells. Here, we designed a novel anchoring ligand by inserting the cyanovinyl-branches inside the anchoring ligands of selected highly efficient dye-sensitizers and studied their intrinsic optical properties using theoretical methods. Our calculated results show that the designed ruthenium dyes provide good performances as sensitizers compared to the selected efficient dyes, because of their red-shift in the UV-visible absorption spectra with an increase in the absorption intensity, smaller energy gaps and thereby enhancing MLCT transitions. We found that, the designed anchoring ligand acts as an efficient "electron-acceptor" which boosts electron-transfer from a -NCS ligand to this ligand via a Ru-bridge, thus providing a way to lower the transition energy gap and enhance the MLCT transitions.

Microstrip antenna study for Pioneer Saturn/Uranus atmosphere entry probe

NASA Technical Reports Server (NTRS)

Kuhlman, E. A.

1974-01-01

The design parameters of a microstrip antenna were studied to determine its performance characteristics as affected by an atmospheric entry probe environment. The technical literature was reviewed to identify the known design and performance characteristics. These data were used to evaluate the expected effects of mission environments on the microstrip antenna design proposed for the Saturn/Uranus Atmospheric Entry Probe (SAEP). Radiation patterns and VSWR measurements were made to evaluate the performance in the SAEP thermal environment. Results of the literature search and pattern tests confirm that the microstrip antenna is a good choice as a transmitting antenna on the SAEP. The microstrip antenna is efficient, compact, and well suited to a space environment. The pattern can be controlled with a minimum beamwidth of 60 degrees (air substrate; e.g., honeycomb structure) and a maximum on the order of 100 degrees with higher dielectric constant substrates. The power handling capacity is good and can be improved by covering the antenna with a dielectric cover.

Motivation, values, and work design as drivers of participation in the R open source project for statistical computing

PubMed Central

Mair, Patrick; Hofmann, Eva; Gruber, Kathrin; Hatzinger, Reinhold; Zeileis, Achim; Hornik, Kurt

2015-01-01

One of the cornerstones of the R system for statistical computing is the multitude of packages contributed by numerous package authors. This amount of packages makes an extremely broad range of statistical techniques and other quantitative methods freely available. Thus far, no empirical study has investigated psychological factors that drive authors to participate in the R project. This article presents a study of R package authors, collecting data on different types of participation (number of packages, participation in mailing lists, participation in conferences), three psychological scales (types of motivation, psychological values, and work design characteristics), and various socio-demographic factors. The data are analyzed using item response models and subsequent generalized linear models, showing that the most important determinants for participation are a hybrid form of motivation and the social characteristics of the work design. Other factors are found to have less impact or influence only specific aspects of participation. PMID:26554005

Micro-jitter attenuation of spaceborne cooler by using a blade-type hyperelastic shape memory alloy passive isolator

NASA Astrophysics Data System (ADS)

Kwon, Seong-Cheol; Jeon, Young-Hyeon; Oh, Hyun-Ung

2017-10-01

In this study, the primary design objective is to develop a passive isolator that can guarantee structural safety of the cooler assembly in a launch vibration environment without a launch locking mechanism, while effectively isolating the cooler-induced micro-jitter during the on-orbit operation of the cooler. To achieve the design objective, we focused on the utilization of characteristics of the hyperelastic shape memory effects. The major advantage of the isolator is that the micro-jitter isolation performance is much less sensitive to the aligned position of the isolator in comparison with the conventional isolator. Moreover, implementation of an additional 0g compensation device during a satellite level on-ground test, such as a jitter measurement test, is not required. In this study, the basic characteristics of the isolator were measured using the torque test and free vibration test. The micro-jitter attenuation capability and position sensitivity of the proposed isolator design were validated by the micro-jitter measurement test.

Motivation, values, and work design as drivers of participation in the R open source project for statistical computing.

PubMed

Mair, Patrick; Hofmann, Eva; Gruber, Kathrin; Hatzinger, Reinhold; Zeileis, Achim; Hornik, Kurt

2015-12-01

One of the cornerstones of the R system for statistical computing is the multitude of packages contributed by numerous package authors. This amount of packages makes an extremely broad range of statistical techniques and other quantitative methods freely available. Thus far, no empirical study has investigated psychological factors that drive authors to participate in the R project. This article presents a study of R package authors, collecting data on different types of participation (number of packages, participation in mailing lists, participation in conferences), three psychological scales (types of motivation, psychological values, and work design characteristics), and various socio-demographic factors. The data are analyzed using item response models and subsequent generalized linear models, showing that the most important determinants for participation are a hybrid form of motivation and the social characteristics of the work design. Other factors are found to have less impact or influence only specific aspects of participation.

Employment Retention after Vision Loss: Intensive Case Studies.

ERIC Educational Resources Information Center

Crudden, Adele; Fireison, Cara K.

This study examined the lives of 10 individuals with blindness or severe visual impairment who maintained competitive employment despite their vision loss. The study was designed to provide information regarding the personal characteristics and current practices related to work environment alterations which enhance competitive employment…

Numerical investigation and performance characteristic mapping of an Archimedean screw hydroturbine

NASA Astrophysics Data System (ADS)

Schleicher, W. Chris

Computational Fluid Dynamics (CFD) is a crucial tool in the design and analysis of hydraulic machinery, especially in the design of a micro hydro turbine. The micro hydro turbine in question is for a low head (less than 60 meters), low volumetric flow rate (0.005 m3/s to 0.5 m 3/s) application with rotation rates varying from 200 RPM to 1500 RPM. The design of the runner geometry is discussed, specifically a non-uniform Archimedean Spiral with an outer diameter of 6 inches and length of 19.5 inches. The transient simulation method, making use of a frame of reference change and a rotating mesh between time-steps, is explained as well as the corresponding boundary conditions. Both simulation methods are compared and are determined to produce similar results. The rotating frame of reference method was determined to be the most suitable method for the mapping of performance characteristic such as required head, torque, power, and efficiency. Results of simulations for a non-uniform Archimedean Spiral are then presented. First, a spectral and temporal convergence study is conducted to make sure that the results are independent of time-step and mesh selection. Performance characteristics of a non-uniform pitched blade turbine are determined for a wide range of volumetric flow rates and rotation rates. The maximum efficiency of the turbine is calculated around 72% for the design of the turbine blade considered in the present study.

The Australasian Resuscitation in Sepsis Evaluation (ARISE) trial statistical analysis plan.

PubMed

Delaney, Anthony P; Peake, Sandra L; Bellomo, Rinaldo; Cameron, Peter; Holdgate, Anna; Howe, Belinda; Higgins, Alisa; Presneill, Jeffrey; Webb, Steve

2013-09-01

The Australasian Resuscitation in Sepsis Evaluation (ARISE) study is an international, multicentre, randomised, controlled trial designed to evaluate the effectiveness of early goal-directed therapy compared with standard care for patients presenting to the emergency department with severe sepsis. In keeping with current practice, and considering aspects of trial design and reporting specific to non-pharmacological interventions, our plan outlines the principles and methods for analysing and reporting the trial results. The document is prepared before completion of recruitment into the ARISE study, without knowledge of the results of the interim analysis conducted by the data safety and monitoring committee and before completion of the two related international studies. Our statistical analysis plan was designed by the ARISE chief investigators, and reviewed and approved by the ARISE steering committee. We reviewed the data collected by the research team as specified in the study protocol and detailed in the study case report form. We describe information related to baseline characteristics, characteristics of delivery of the trial interventions, details of resuscitation, other related therapies and other relevant data with appropriate comparisons between groups. We define the primary, secondary and tertiary outcomes for the study, with description of the planned statistical analyses. We have developed a statistical analysis plan with a trial profile, mock-up tables and figures. We describe a plan for presenting baseline characteristics, microbiological and antibiotic therapy, details of the interventions, processes of care and concomitant therapies and adverse events. We describe the primary, secondary and tertiary outcomes with identification of subgroups to be analysed. We have developed a statistical analysis plan for the ARISE study, available in the public domain, before the completion of recruitment into the study. This will minimise analytical bias and conforms to current best practice in conducting clinical trials.

Hierarchical structures of metal micro- and nanoparticles for PIM

NASA Astrophysics Data System (ADS)

Pervikov, Aleksandr; Rodkevich, Nikolay; Glazkova, Elena; Lerner, Marat

2017-12-01

The design of the metal nanopowder composition to prepare the feedstock for powder injection molding was researched. The treatment of aluminum nanopowders with organic compounds was studied. The organic compounds sorbed on the surface of the nanoparticles was shown to change drastically the physico-mechanical characteristics of the nanopowders. These nanopowders demonstrate enhanced characteristics, in particularly, low reactivity, high compatibility with organic binder for feedstocks.

The Longitudinal Effects of Network Characteristics on the Mental Health of Mothers of Children with ASD: The Mediating Role of Parent Cognitions

ERIC Educational Resources Information Center

Benson, Paul R.

2016-01-01

Employing a cohort sequential design, the effects of network characteristics on maternal cognitions (perceived social support and parenting self-efficacy) and mental health (depression and well-being) were assessed over 7 years when children with ASD of mothers in the study were age 7-14. Findings indicated that network size, network emotional…

Implementing Set Based Design into Department of Defense Acquisition

DTIC Science & Technology

2016-12-01

challenges for the DOD. This report identifies the original SBD principles and characteristics based on Toyota Motor Corporation’s Set Based Concurrent...Engineering Model. Additionally, the team reviewed DOD case studies that implemented SBD. The SBD principles , along with the common themes from the...perennial challenges for the DOD. This report identifies the original SBD principles and characteristics based on Toyota Motor Corporation’s Set

Teaching Gene Technology in an Outreach Lab: Students' Assigned Cognitive Load Clusters and the Clusters' Relationships to Learner Characteristics, Laboratory Variables, and Cognitive Achievement

ERIC Educational Resources Information Center

Scharfenberg, Franz-Josef; Bogner, Franz X.

2013-01-01

This study classified students into different cognitive load (CL) groups by means of cluster analysis based on their experienced CL in a gene technology outreach lab which has instructionally been designed with regard to CL theory. The relationships of the identified student CL clusters to learner characteristics, laboratory variables, and…

An investigation of the performance of an electronic in-line pump system for diesel engines

NASA Astrophysics Data System (ADS)

Fan, Li-Yun; Zhu, Yuan-Xian; Long, Wu-Qiang; Ma, Xiu-Zhen; Xue, Ying-Ying

2008-12-01

WIT Electronic Fuel System Co., Ltd. has developed a new fuel injector, the Electronic In-line Pump (EIP) system, designed to meet China’s diesel engine emission and fuel economy regulations. It can be used on marine diesel engines and commercial vehicle engines through different EIP systems. A numerical model of the EIP system was built in the AMESim environment for the purpose of creating a design tool for engine application and system optimization. The model was used to predict key injection characteristics under different operating conditions, such as injection pressure, injection rate, and injection duration. To validate these predictions, experimental tests were conducted under the conditions that were modeled. The results were quite encouraging and in agreement with model predictions. Additional experiments were conducted to study the injection characteristics of the EIP system. These results show that injection pressure and injection quantity are insensitive to injection timing variations, this is due to the design of the constant velocity cam profile. Finally, injection quantity and pressure vs. pulse width at different cam speeds are presented, an important injection characteristic for EIP system calibration.

MODEL BASED BIOMASS SYSTEM DESIGN OF FEEDSTOCK SUPPLY SYSTEMS FOR BIOENERGY PRODUCTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

David J. Muth, Jr.; Jacob J. Jacobson; Kenneth M. Bryden

Engineering feedstock supply systems that deliver affordable, high-quality biomass remains a challenge for the emerging bioenergy industry. Cellulosic biomass is geographically distributed and has diverse physical and chemical properties. Because of this feedstock supply systems that deliver cellulosic biomass resources to biorefineries require integration of a broad set of engineered unit operations. These unit operations include harvest and collection, storage, preprocessing, and transportation processes. Design decisions for each feedstock supply system unit operation impact the engineering design and performance of the other system elements. These interdependencies are further complicated by spatial and temporal variances such as climate conditions and biomassmore » characteristics. This paper develops an integrated model that couples a SQL-based data management engine and systems dynamics models to design and evaluate biomass feedstock supply systems. The integrated model, called the Biomass Logistics Model (BLM), includes a suite of databases that provide 1) engineering performance data for hundreds of equipment systems, 2) spatially explicit labor cost datasets, and 3) local tax and regulation data. The BLM analytic engine is built in the systems dynamics software package PowersimTM. The BLM is designed to work with thermochemical and biochemical based biofuel conversion platforms and accommodates a range of cellulosic biomass types (i.e., herbaceous residues, short- rotation woody and herbaceous energy crops, woody residues, algae, etc.). The BLM simulates the flow of biomass through the entire supply chain, tracking changes in feedstock characteristics (i.e., moisture content, dry matter, ash content, and dry bulk density) as influenced by the various operations in the supply chain. By accounting for all of the equipment that comes into contact with biomass from the point of harvest to the throat of the conversion facility and the change in characteristics, the BLM evaluates economic performance of the engineered system, as well as determining energy consumption and green house gas performance of the design. This paper presents a BLM case study delivering corn stover to produce cellulosic ethanol. The case study utilizes the BLM to model the performance of several feedstock supply system designs. The case study also explores the impact of temporal variations in climate conditions to test the sensitivity of the engineering designs. Results from the case study show that under certain conditions corn stover can be delivered to the cellulosic ethanol biorefinery for $35/dry ton.« less

Advanced Telemetry System Development.

DTIC Science & Technology

Progress in advanced telemetry system development is described. Discussions are included of studies leading to the specification for design...characteristics of adaptive and analytical telemetry systems in which the information efficiently utilizes the data channel capacity. Also discussed are...Progress indicates that further sophistication of existing designs in telemetry will be less advantageous than the development of new systems of

Crime Prevention through Environmental Design (CPTED) Characteristics Associated with Violence and Safety in Middle Schools

ERIC Educational Resources Information Center

Vagi, Kevin J.; Stevens, Mark R.; Simon, Thomas R.; Basile, Kathleen C.; Carter, Sherry P.; Carter, Stanley L.

2018-01-01

Background: This study used a new Crime Prevention Through Environmental Design (CPTED) assessment tool to test the associations between physical attributes of schools and violence-related behaviors and perceptions of students. Methods: Data were collected from 4717 students from 50 middle schools. Student perceptions of risk and safety, and…

Examining the Characteristics of Student Postings That Are Liked and Linked in a CSCL Environment

ERIC Educational Resources Information Center

Makos, Alexandra; Lee, Kyungmee; Zingaro, Daniel

2015-01-01

This case study is the first iteration of a large-scale design-based research project to improve Pepper, an interactive discussion-based learning environment. In this phase, we designed and implemented two social features to scaffold positive learner interactivity behaviors: a "Like" button and linking tool. A mixed-methods approach was…

49 CFR Appendix B to Part 240 - Procedures for Submission and Approval of Locomotive Engineer Qualification Programs

Code of Federal Regulations, 2012 CFR

2012-10-01

... determining the qualifications of each person it permits or requires to operate a locomotive. In designing its...) for train control that are employed, the operational design characteristics of the track and equipment... completion of a course of study, or successful passage of a standardized testing program, the submission must...

49 CFR Appendix B to Part 240 - Procedures for Submission and Approval of Locomotive Engineer Qualification Programs

Code of Federal Regulations, 2013 CFR

2013-10-01

... determining the qualifications of each person it permits or requires to operate a locomotive. In designing its...) for train control that are employed, the operational design characteristics of the track and equipment... completion of a course of study, or successful passage of a standardized testing program, the submission must...

49 CFR Appendix B to Part 240 - Procedures for Submission and Approval of Locomotive Engineer Qualification Programs

Code of Federal Regulations, 2011 CFR

2011-10-01

... determining the qualifications of each person it permits or requires to operate a locomotive. In designing its...) for train control that are employed, the operational design characteristics of the track and equipment... completion of a course of study, or successful passage of a standardized testing program, the submission must...

49 CFR Appendix B to Part 240 - Procedures for Submission and Approval of Locomotive Engineer Qualification Programs

Code of Federal Regulations, 2010 CFR

2010-10-01

... determining the qualifications of each person it permits or requires to operate a locomotive. In designing its...) for train control that are employed, the operational design characteristics of the track and equipment... completion of a course of study, or successful passage of a standardized testing program, the submission must...

49 CFR Appendix B to Part 240 - Procedures for Submission and Approval of Locomotive Engineer Qualification Programs

Code of Federal Regulations, 2014 CFR

2014-10-01

... determining the qualifications of each person it permits or requires to operate a locomotive. In designing its...) for train control that are employed, the operational design characteristics of the track and equipment... completion of a course of study, or successful passage of a standardized testing program, the submission must...

Experimental Study of Injection Characteristics of a Multi-hole port injector on various Fuel Injection pressures and Temperatures

NASA Astrophysics Data System (ADS)

Movahednejad, E.; Ommi, F.; Nekofar, K.

2013-04-01

The structures of the port injector spray dominates the mixture preparation process and strongly affect the subsequent engine combustion characteristics over a wide range of operating conditions in port-injection gasoline engines. All these spray characteristics are determined by particular injector design and operating conditions. In this paper, an experimental study is made to characterize the breakup mechanism and spray characteristics of a injector with multi-disc nozzle (SAGEM,D2159MA). A comparison was made on injection characteristics of the multi-hole injectors and its effects on various fuel pressure and temperature. The distributions of the droplet size and velocity and volume flux were characterized using phase Doppler anemometry (PDA) technique. Through this work, it was found that the injector produces a finer spray with a wide spray angle in higher fuel pressure and temperature.

A charging study of ACTS using NASCAP

NASA Technical Reports Server (NTRS)

Herr, Joel L.

1991-01-01

The NASA Charging Analyzer Program (NASCAP) computer code is a three dimensional finite element charging code designed to analyze spacecraft charging in the magnetosphere. Because of the characteristics of this problem, NASCAP can use an quasi-static approach to provide a spacecraft designer with an understanding of how a specific spacecraft will interact with a geomagnetic substorm. The results of the simulation can help designers evaluate the probability and location of arc discharges of charged surfaces on the spacecraft. A charging study of NASA's Advanced Communication Technology Satellite (ACTS) using NASCAP is reported. The results show that the ACTS metalized multilayer insulating blanket design should provide good electrostatic discharge control.

78 FR 25734 - Notice of Petition for Waiver of Hussmann From the Department of Energy Commercial Refrigerator...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-02

... to provide materially inaccurate comparative data.'' The design characteristics constituting the... inaccurate comparative data'' The design characteristics constituting the grounds for the Interim Waiver... Secretary) to prescribe test procedures that are reasonably designed to produce results that measure energy...

76 FR 50438 - Folded Self-Mailers and Unenveloped Mailpieces

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-15

... are currently found in FSM designs, but are not defined in the DMM, are added. History To improve the... designed to identify the characteristics of FSMs that could be processed successfully on automated letter... characteristics of additional design elements for mailers who create FSM mailpieces. Folded self-mailer maximum...

Fast-axial turbulent flow CO2 laser output characteristics and scaling parameters

NASA Astrophysics Data System (ADS)

Dembovetsky, V. V.; Zavalova, Valentina Y.; Zavalov, Yuri N.

1996-04-01

The paper presents the experimental results of evaluating the output characteristics of TLA- 600 carbon-dioxide laser with axial turbulent gas flow, as well as the results of numerical modeling. The output characteristic and spatial distribution of laser beam were measured with regard to specific energy input, working mixture pressure, active media length and output mirror reflection. The paper presents the results of experimental and theoretical study and design decisions on a succession of similar type industrial carbon-dioxide lasers with fast-axial gas-flow and dc discharge excitation of active medium developed at NICTL RAN. As an illustration, characteristics of the TLA-600 laser are cited.

40 CFR 798.4900 - Developmental toxicity study.

Code of Federal Regulations, 2011 CFR

2011-07-01

... study is designed to provide information on the potential hazard to the unborn which may arise from... 40 Protection of Environment 32 2011-07-01 2011-07-01 false Developmental toxicity study. 798.4900... Developmental toxicity study. (a) Purpose. In the assessment and evaluation of the toxic characteristics of a...

40 CFR 798.4900 - Developmental toxicity study.

Code of Federal Regulations, 2012 CFR

2012-07-01

... study is designed to provide information on the potential hazard to the unborn which may arise from... 40 Protection of Environment 33 2012-07-01 2012-07-01 false Developmental toxicity study. 798.4900... Developmental toxicity study. (a) Purpose. In the assessment and evaluation of the toxic characteristics of a...

40 CFR 798.4900 - Developmental toxicity study.

Code of Federal Regulations, 2013 CFR

2013-07-01

... study is designed to provide information on the potential hazard to the unborn which may arise from... 40 Protection of Environment 33 2013-07-01 2013-07-01 false Developmental toxicity study. 798.4900... Developmental toxicity study. (a) Purpose. In the assessment and evaluation of the toxic characteristics of a...

40 CFR 798.4900 - Developmental toxicity study.

Code of Federal Regulations, 2014 CFR

2014-07-01

... study is designed to provide information on the potential hazard to the unborn which may arise from... 40 Protection of Environment 32 2014-07-01 2014-07-01 false Developmental toxicity study. 798.4900... Developmental toxicity study. (a) Purpose. In the assessment and evaluation of the toxic characteristics of a...

Deep Throttle Turbopump Technology Design Concepts

NASA Technical Reports Server (NTRS)

Guinzburg, Adiel; Williams, Morgan; Ferguson, Tom; Garcia, Roberto (Technical Monitor)

2002-01-01

The objective of this project is to increase the throttling range of turbopumps from 30 to 120% of the design value, while maintaining high performance levels. Details are given on wide flow range issues, H-Q characteristics, stall characteristics, energy levels, pressure fluctuations at impeller exit, WFR impeller characteristics, commercial diffuser pumps, slotted or tandem vanes, leading edge characteristics, leading edge models, throat models, diffusion passage models, computational fluid dynamics (CFD) methodologies, and CFD flow cases.

Design review - A tool for all seasons.

NASA Technical Reports Server (NTRS)

Liberman, D. S.

1972-01-01

The origins of design review are considered together with questions of definitions. The main characteristics which distinguish the concept of design review discussed from the basic master-apprentice relationship include competence, objectivity, formality, and a systematic approach. Preliminary, major, and final reviews are the steps used in the management of the design and development process in each company. It is shown that the design review is generically a systems engineering milestone review with certain unique characteristics.

Properties of Artifact Representations for Evolutionary Design

NASA Technical Reports Server (NTRS)

Hornby, Gregory S.

2004-01-01

To achieve evolutionary design systems that scale to the levels achieved by man-made artifacts we can look to their characteristics of modularity, hierarchy and regularity to guide us. For this we focus on design representations, since they strongly determine the ability of evolutionary design systems to evolve artifacts with these characteristics. We identify three properties of design representations - combination, control-flow and abstraction - and discuss how they relate to hierarchy, modularity and regularity.

Study to develop improved fire resistant aircraft passenger seat materials

NASA Technical Reports Server (NTRS)

Duskin, F. E.; Schutter, K. J.; Sieth, H. H.; Trabold, E. L.

1980-01-01

The Phase 3 study of the NASA 'Improved Fire Resistant Aircraft Seat Materials' involved fire tests of improved materials in multilayered combinations representative of cushion configurations. Tests were conducted to determine their thermal, smoke, and fire resistance characteristics. Additionally, a 'Design Guideline' for Fire Resistant Passenger Seats was written outlining general seat design considerations. Finally, a three-abreast 'Tourist Class' passenger seat assembly fabricated from the most advanced fire-resistant materials was delivered.

V/STOL tilt-rotor study, task 1. Volume 1: Conceptual design

NASA Technical Reports Server (NTRS)

1972-01-01

A conceptual design study was conducted to define a representative military and/or commercial tilt-propeller aircraft for short takeoff and landing operation. The level of structural technology selected for the operational aircraft was based on aluminum, steel, titanium, and adhesive bonded structures. The data describe the following: (1) aircraft weight, (2) performance and stability, (3) aerodynamic noise, (4) dynamic characteristics, (5) maintainability and reliability, and (6) operating economics.

A proposed framework for evaluating and comparing efficacy estimates in clinical trials of new rotavirus vaccines.

PubMed

Neuzil, Kathleen M; Zaman, K; Victor, John C

2014-08-11

Oral rotavirus vaccines have yielded different point estimates of efficacy when tested in different populations. While population and environmental factors may account for these differences, study design characteristics should also be considered. We review the study design elements of rotavirus vaccine trials that may affect point estimates of efficacy, and propose a framework for evaluating new rotavirus vaccines. Copyright © 2014. Published by Elsevier Ltd.

The Study on Mental Health at Work: Design and sampling.

PubMed

Rose, Uwe; Schiel, Stefan; Schröder, Helmut; Kleudgen, Martin; Tophoven, Silke; Rauch, Angela; Freude, Gabriele; Müller, Grit

2017-08-01

The Study on Mental Health at Work (S-MGA) generates the first nationwide representative survey enabling the exploration of the relationship between working conditions, mental health and functioning. This paper describes the study design, sampling procedures and data collection, and presents a summary of the sample characteristics. S-MGA is a representative study of German employees aged 31-60 years subject to social security contributions. The sample was drawn from the employment register based on a two-stage cluster sampling procedure. Firstly, 206 municipalities were randomly selected from a pool of 12,227 municipalities in Germany. Secondly, 13,590 addresses were drawn from the selected municipalities for the purpose of conducting 4500 face-to-face interviews. The questionnaire covers psychosocial working and employment conditions, measures of mental health, work ability and functioning. Data from personal interviews were combined with employment histories from register data. Descriptive statistics of socio-demographic characteristics and logistic regressions analyses were used for comparing population, gross sample and respondents. In total, 4511 face-to-face interviews were conducted. A test for sampling bias revealed that individuals in older cohorts participated more often, while individuals with an unknown educational level, residing in major cities or with a non-German ethnic background were slightly underrepresented. There is no indication of major deviations in characteristics between the basic population and the sample of respondents. Hence, S-MGA provides representative data for research on work and health, designed as a cohort study with plans to rerun the survey 5 years after the first assessment.

Current and future technology in radial and axial gas turbines

NASA Technical Reports Server (NTRS)

Rohlik, H. E.

1983-01-01

Design approaches and flow analysis techniques currently employed by aircraft engine manufacturers are assessed. Studies were performed to define the characteristics of aircraft and engines for civil missions of the 1990's and beyond. These studies, coupled with experience in recent years, identified the critical technologies needed to meet long range goals in fuel economy and other operating costs. Study results, recent and current research and development programs, and an estimate of future design and analytic capabilities are discussed.

Design and Evaluation of Fault-Tolerant VLSI/WSI Processor Arrays.

DTIC Science & Technology

1987-12-31

studies reported in this paper. In Section .3, the reliabuility characteristics of single-level FTPA’s are discusseri. Four different type of FTPA’s are...for processor arrays are proposed and studied . Stu- dies on algorithmic and software aspects relevant to systems are reported in items 4, 5, 8, 12 and...O’Keefe M., and Fortes, J. A. B., "A Comparative Study of Two Systematic Design Methodologies for Systolic Arrays," (Long Version) International Workshop on

Minimum energy, liquid hydrogen supersonic cruise vehicle study

NASA Technical Reports Server (NTRS)

Brewer, G. D.; Morris, R. E.

1975-01-01

The potential was examined of hydrogen-fueled supersonic vehicles designed for cruise at Mach 2.7 and at Mach 2.2. The aerodynamic, weight, and propulsion characteristics of a previously established design of a LH2 fueled, Mach 2.7 supersonic cruise vehicle (SCV) were critically reviewed and updated. The design of a Mach 2.2 SCV was established on a corresponding basis. These baseline designs were then studied to determine the potential of minimizing energy expenditure in performing their design mission, and to explore the effect of fuel price and noise restriction on their design and operating performance. The baseline designs of LH2 fueled aircraft were than compared with equivalent designs of jet A (conventional hydrocarbon) fueled SCV's. Use of liquid hydrogen for fuel for the subject aircraft provides significant advantages in performance, cost, noise, pollution, sonic boom, and energy utilization.

A meta-analysis of research on science teacher education practices associated with inquiry strategy

NASA Astrophysics Data System (ADS)

Sweitzer, Gary L.; Anderson, Ronald D.

A meta-analysis was conducted of studies of teacher education having as measured outcomes one or more variables associated with inquiry teaching. Inquiry addresses those teacher behaviors that facilitate student acquisition of concepts and processes through strategies such as problem solving, uses of evidence, logical and analytical reasoning, clarification of values, and decision making. Studies which contained sufficient data for the calculation of an effect size were coded for 114 variables. These variables were divided into the following six major categories: study information and design characteristics, teacher and teacher trainee characteristics, student characteristics, treatment description, outcome description, and effect size calculation. A total of 68 studies resulting in 177 effect size calculations were coded. Mean effect sizes broken across selected variables were calculated.

Multi-objective/loading optimization for rotating composite flexbeams

NASA Technical Reports Server (NTRS)

Hamilton, Brian K.; Peters, James R.

1989-01-01

With the evolution of advanced composites, the feasibility of designing bearingless rotor systems for high speed, demanding maneuver envelopes, and high aircraft gross weights has become a reality. These systems eliminate the need for hinges and heavily loaded bearings by incorporating a composite flexbeam structure which accommodates flapping, lead-lag, and feathering motions by bending and twisting while reacting full blade centrifugal force. The flight characteristics of a bearingless rotor system are largely dependent on hub design, and the principal element in this type of system is the composite flexbeam. As in any hub design, trade off studies must be performed in order to optimize performance, dynamics (stability), handling qualities, and stresses. However, since the flexbeam structure is the primary component which will determine the balance of these characteristics, its design and fabrication are not straightforward. It was concluded that: pitchcase and snubber damper representations are required in the flexbeam model for proper sizing resulting from dynamic requirements; optimization is necessary for flexbeam design, since it reduces the design iteration time and results in an improved design; and inclusion of multiple flight conditions and their corresponding fatigue allowables is necessary for the optimization procedure.

Analysis of operational requirements for medium density air transportation. Volume 1: Summary

NASA Technical Reports Server (NTRS)

1975-01-01

The medium density air travel market was studied to determine the aircraft design and operational requirements. The impact of operational characteristics on the air travel system and the economic viability of the study aircraft were also evaluated. Medium density is defined in terms of numbers of people transported (20 to 500 passengers per day on round trip routes), and frequency of service ( a minumium of two and maximum of eight round trips per day) for 10 regional carriers. The operational characteristics of aircraft best suited to serve the medium density air transportation market are determined and a basepoint aircraft is designed from which tradeoff studies and parametric variations could be conducted. The impact of selected aircraft on the medium density market, economics, and operations is ascertained. Research and technology objectives for future programs in medium density air transportation are identified and ranked.

Value-centric design architecture based on analysis of space system characteristics

NASA Astrophysics Data System (ADS)

Xu, Q.; Hollingsworth, P.; Smith, K.

2018-03-01

Emerging design concepts such as miniaturisation, modularity, and standardisation, have contributed to the rapid development of small and inexpensive platforms, particularly cubesats. This has been stimulating an upcoming revolution in space design and development, leading satellites into the era of "smaller, faster, and cheaper". However, the current requirement-centric design philosophy, focused on bespoke monolithic systems, along with the associated development and production process does not inherently fit with the innovative modular, standardised, and mass-produced technologies. This paper presents a new categorisation, characterisation, and value-centric design architecture to address this need for both traditional and novel system designs. Based on the categorisation of system configurations, a characterisation of space systems, comprised of duplication, fractionation, and derivation, is proposed to capture the overall system configuration characteristics and promote potential hybrid designs. Complying with the definitions of the system characterisation, mathematical mapping relations between the system characterisation and the system properties are described to establish the mathematical foundation of the proposed value-centric design methodology. To illustrate the methodology, subsystem reliability relationships are therefore analysed to explore potential system configurations in the design space. The results of the applications of system characteristic analysis clearly show that the effects of different configuration characteristics on the system properties can be effectively analysed and evaluated, enabling the optimization of system configurations.

Assessment and control design for steam vent noise in an oil refinery.

PubMed

Monazzam, Mohammad Reza; Golmohammadi, Rostam; Nourollahi, Maryam; Momen Bellah Fard, Samaneh

2011-06-13

Noise is one of the most important harmful agents in work environment. Noise pollution in oil refinery industries is related to workers' health. This study aimed to determine the overall noise pollution of an oil refinery operation and its frequency analysis to determine the control plan for a vent noise in these industries. This experimental study performed in control unit of Tehran Oil Refinery in 2008. To determine the noise distributions, environmental noise measurements were carried out by lattice method according to basic information and technical process. The sound pressure level and frequency distribution was measured for each study sources subject separately was performed individually. According to the vent's specification, the measured steam noise characteristics reviewed and compared to the theoretical results of steam noise estimation. Eventually, a double expansion muffler was designed. Data analysis and graphical design were carried out using Excel software. The results of environmental noise measurements indicated that the level of sound pressure was above the national permitted level (85 dB (A)). The Mean level of sound pressure of the studied steam jet was 90.3 dB (L). The results of noise frequency analysis for the steam vents showed that the dominant frequency was 4000 Hz. To obtain 17 dB noise reductions, a double chamber aluminum muffler with 500 mm length and 200 mm diameter consisting pipe drilled was designed. The characteristics of steam vent noise were separated from other sources, a double expansion muffler was designed using a new method based on the level of steam noise, and principle sound frequency, a double expansion muffler was designed.

Qualitative assessment of a Context of Consumption Framework to inform regulation of cigarette pack design in the U.S.

PubMed

Lee, Joseph G L; Averett, Paige E; Blanchflower, Tiffany; Gregory, Kyle R

2018-02-01

Researchers and regulators need to know how changes to cigarette packages can influence population health. We sought to advance research on the role of cigarette packaging by assessing a theory-informed framework from the fields of design and consumer research. The selected Context of Consumption Framework posits cognitive, affective, and behavioral responses to visual design. To assess the Framework's potential for guiding research on the visual design of cigarette packaging in the U.S., this study seeks to understand to what extent the Context of Consumption Framework converges with how adult smokers think and talk about cigarette pack designs. Data for this qualitative study came from six telephone-based focus groups conducted in March 2017. Two groups consisted of lesbian, gay, and bisexual participants; two groups of participants with less than four years college education; one group of LGB and straight identity; and one group the general population. All groups were selected for regional, gender, and racial/ethnic diversity. Participants (n=33) represented all nine U.S. Census divisions. We conducted a deductive qualitative analysis. Cigarette package designs captured the participants' attention, suggested the characteristics of the product, and reflected (or could be leveraged to convey) multiple dimensions of consumer identity. Particular to the affective responses to design, our participants shared that cigarette packaging conveyed how the pack could be used to particular ends, created an emotional response to the designs, complied with normative expectations of a cigarette, elicited interest when designs change, and prompted fascination when unique design characteristics are used. Use of the Context of Consumption Framework for cigarette product packaging design can inform regulatory research on tobacco product packaging. Researchers and regulators should consider multiple cognitive, affective, and behavioral responses to cigarette pack design.

The Effects of Q-Matrix Design on Classification Accuracy in the Log-Linear Cognitive Diagnosis Model.

PubMed

Madison, Matthew J; Bradshaw, Laine P

2015-06-01

Diagnostic classification models are psychometric models that aim to classify examinees according to their mastery or non-mastery of specified latent characteristics. These models are well-suited for providing diagnostic feedback on educational assessments because of their practical efficiency and increased reliability when compared with other multidimensional measurement models. A priori specifications of which latent characteristics or attributes are measured by each item are a core element of the diagnostic assessment design. This item-attribute alignment, expressed in a Q-matrix, precedes and supports any inference resulting from the application of the diagnostic classification model. This study investigates the effects of Q-matrix design on classification accuracy for the log-linear cognitive diagnosis model. Results indicate that classification accuracy, reliability, and convergence rates improve when the Q-matrix contains isolated information from each measured attribute.

Understanding Outdoor Gyms in Public Open Spaces: A Systematic Review and Integrative Synthesis of Qualitative and Quantitative Evidence

PubMed Central

Lee, Janet Lok Chun; Lo, Temmy Lee Ting

2018-01-01

(1) Background: An outdoor gym (OG) is environmental infrastructure built in a public open space to promote structured physical activity. The provision of OGs is increasingly seen as an important strategy to realize public health agendas promoting habitual physical activity. A systematic review was conducted to synthesize characteristics of OG and OG users’ experiences and perceptions in different cultural contexts; (2) Methods: Online searches of multidisciplinary databases were conducted in health, sport and recreation, and urban planning disciplines. Characteristics of OGs were synthesized by integrating evidence from quantitative, qualitative, and mix-methods studies. The experiences and perceptions of OG users from both qualitative data and survey responses were synthesized through framework analysis; (3) Results: Nine studies met the inclusion criteria (three quantitative studies, four mixed-methods studies, and two pure qualitative studies). None were excluded on the basis of quality. OGs mainly serve adult and older adult population groups. Their size, design, and instructional support vary across studies. The inclusion of functional types of equipment did not have a unified standard. Regarding experiences and perceptions of OGs, five major themes emerged: “health”, “social connectedness”, “affordable”, “support”, and “design and promotion”; (4) Conclusions: The OG characteristics synthesis guides the direction in further studies regarding exploration of design parameters. The qualitative and quantitative synthesis revealed that health was a central theme of users’ experiences. OGs are also spaces where community-dwellers can find social connectedness while participating in structured physical activity at no cost. Findings from this review create knowledge support for OG as environmental infrastructure for further research and facilitate the understanding of users’ experiences and perceptions of OGs in different cultural contexts. PMID:29587402

Parallel particle impactor - novel size-selective particle sampler for accurate fractioning of inhalable particles

NASA Astrophysics Data System (ADS)

Trakumas, S.; Salter, E.

2009-02-01

Adverse health effects due to exposure to airborne particles are associated with particle deposition within the human respiratory tract. Particle size, shape, chemical composition, and the individual physiological characteristics of each person determine to what depth inhaled particles may penetrate and deposit within the respiratory tract. Various particle inertial classification devices are available to fractionate airborne particles according to their aerodynamic size to approximate particle penetration through the human respiratory tract. Cyclones are most often used to sample thoracic or respirable fractions of inhaled particles. Extensive studies of different cyclonic samplers have shown, however, that the sampling characteristics of cyclones do not follow the entire selected convention accurately. In the search for a more accurate way to assess worker exposure to different fractions of inhaled dust, a novel sampler comprising several inertial impactors arranged in parallel was designed and tested. The new design includes a number of separated impactors arranged in parallel. Prototypes of respirable and thoracic samplers each comprising four impactors arranged in parallel were manufactured and tested. Results indicated that the prototype samplers followed closely the penetration characteristics for which they were designed. The new samplers were found to perform similarly for liquid and solid test particles; penetration characteristics remained unchanged even after prolonged exposure to coal mine dust at high concentration. The new parallel impactor design can be applied to approximate any monotonically decreasing penetration curve at a selected flow rate. Personal-size samplers that operate at a few L/min as well as area samplers that operate at higher flow rates can be made based on the suggested design. Performance of such samplers can be predicted with high accuracy employing well-established impaction theory.

Practical design and evaluation methods of omnidirectional vision sensors

NASA Astrophysics Data System (ADS)

Ohte, Akira; Tsuzuki, Osamu

2012-01-01

A practical omnidirectional vision sensor, consisting of a curved mirror, a mirror-supporting structure, and a megapixel digital imaging system, can view a field of 360 deg horizontally and 135 deg vertically. The authors theoretically analyzed and evaluated several curved mirrors, namely, a spherical mirror, an equidistant mirror, and a single viewpoint mirror (hyperboloidal mirror). The focus of their study was mainly on the image-forming characteristics, position of the virtual images, and size of blur spot images. The authors propose here a practical design method that satisfies the required characteristics. They developed image-processing software for converting circular images to images of the desired characteristics in real time. They also developed several prototype vision sensors using spherical mirrors. Reports dealing with virtual images and blur-spot size of curved mirrors are few; therefore, this paper will be very useful for the development of omnidirectional vision sensors.

Characteristics and measurement of supersonic projectile shock waves by a 32-microphone ring array

NASA Astrophysics Data System (ADS)

Chang, Ho; Wu, Yan-Chyuan; Tsung, Tsing-Tshih

2011-08-01

This paper discusses about the characteristics of supersonic projectile shock wave in muzzle region during firing of high explosive anti-tank (HEAT) and high explosive (HE) projectiles. HEAT projectiles are fired horizontally at a muzzle velocity of Mach 3.5 from a medium caliber tank gun equipped with a newly designed multi-perforated muzzle brake, whereas HE projectiles are fired at elevation angles at a muzzle velocity of Mach 2 from a large caliber howitzer equipped with a newly designed double-baffle muzzle brake. In the near field, pressure signatures of the N-wave generated from projectiles are measured by 32-microphone ring array wrapped by cotton sheath. Records measured by the microphone array are used to demonstrate several key characteristics of the shock wave of supersonic projectile. All measurements made in this study can be a significant reference for developing guns, tanks, or the chassis of fighting vehicles.

Characteristics and measurement of supersonic projectile shock waves by a 32-microphone ring array.

PubMed

Chang, Ho; Wu, Yan-Chyuan; Tsung, Tsing-Tshih

2011-08-01

This paper discusses about the characteristics of supersonic projectile shock wave in muzzle region during firing of high explosive anti-tank (HEAT) and high explosive (HE) projectiles. HEAT projectiles are fired horizontally at a muzzle velocity of Mach 3.5 from a medium caliber tank gun equipped with a newly designed multi-perforated muzzle brake, whereas HE projectiles are fired at elevation angles at a muzzle velocity of Mach 2 from a large caliber howitzer equipped with a newly designed double-baffle muzzle brake. In the near field, pressure signatures of the N-wave generated from projectiles are measured by 32-microphone ring array wrapped by cotton sheath. Records measured by the microphone array are used to demonstrate several key characteristics of the shock wave of supersonic projectile. All measurements made in this study can be a significant reference for developing guns, tanks, or the chassis of fighting vehicles.

Efficient gene delivery to primary human retinal pigment epithelial cells: The innate and acquired properties of vectors.

PubMed

Tasharrofi, Nooshin; Kouhkan, Fatemeh; Soleimani, Masoud; Soheili, Zahra-Soheila; Atyabi, Fatemeh; Akbari Javar, Hamid; Abedin Dorkoosh, Farid

2017-02-25

The purpose of this study is designing non-viral gene delivery vectors for transfection of the primary human retinal pigment epithelial cells (RPE). In the design process of gene delivery vectors, considering physicochemical properties of vectors alone does not seem to be enough since they interact with constituents of the surrounding environment and hence gain new characteristics. Moreover, due to these interactions, their cargo can be released untimely or undergo degradation before reaching to the target cells. Further, the characteristics of cells itself can also influence the transfection efficacy. For example, the non-dividing property of RPE cells can impede the transfection efficiency which in most studies was ignored by using immortal cell lines. In this study, vectors with different characteristics differing in mixing orders of pDNA, PEI polymer, and PLGA/PEI or PLGA nanoparticles were prepared and characterized. Then, their characteristics and efficacy in gene delivery to RPE cells in the presence of vitreous or fetal bovine serum (FBS) were evaluated. All formulations showed no cytotoxicity and were able to protect pDNA from premature release and degradation in extracellular media. Also, the adsorption of vitreous or serum proteins onto the surface of vectors changed their properties and hence cellular uptake and transfection efficacy. Copyright © 2016 Elsevier B.V. All rights reserved.

A Children of Twins Study of parental divorce and offspring psychopathology.

PubMed

D'Onofrio, Brian M; Turkheimer, Eric; Emery, Robert E; Maes, Hermine H; Silberg, Judy; Eaves, Lindon J

2007-07-01

Although parental divorce is associated with increased substance use and internalizing problems, experiencing the separation of one's parents may not cause these outcomes. The relations may be due to genetic or environmental selection factors, characteristics that lead to both marital separation and offspring functioning. We used the Children of Twins (CoT) Design to explore whether unmeasured genetic or environmental factors related to the twin parent, and measured characteristics of both parents, account for the association between parental divorce and offspring substance use and internalizing problems. The association between parental divorce and offspring substance use problems remained robust when controlling for genetic and environmental risk from the twin parent associated with parental divorce, and measured characteristics of both parents. The results do not prove, but are consistent with, a causal connection. In contrast, the analyses suggest that shared genetic liability in parents and their offspring accounts for the increased risk of internalizing problems in adult offspring from divorced families. The study illustrates that unmeasured genetic and environmental selection factors must be considered when studying parental divorce. In explaining associations between parental divorce and young-adult adjustment, our evidence suggests that selection versus causal mechanisms may operate differently for substance abuse (a causal relation) and internalizing problems (an artifact of selection). The CoT design only controls for the genetic and environmental characteristics of one parent; thus, additional genetically informed analyses are needed.

Practical characteristics of adaptive design in phase 2 and 3 clinical trials.

PubMed

Sato, A; Shimura, M; Gosho, M

2018-04-01

Adaptive design methods are expected to be ethical, reflect real medical practice, increase the likelihood of research and development success and reduce the allocation of patients into ineffective treatment groups by the early termination of clinical trials. However, the comprehensive details regarding which types of clinical trials will include adaptive designs remain unclear. We examined the practical characteristics of adaptive design used in clinical trials. We conducted a literature search of adaptive design clinical trials published from 2012 to 2015 using PubMed, EMBASE, and the Cochrane Central Register of Controlled Trials, with common search terms related to adaptive design. We systematically assessed the types and characteristics of adaptive designs and disease areas employed in the adaptive design trials. Our survey identified 245 adaptive design clinical trials. The number of trials by the publication year increased from 2012 to 2013 and did not greatly change afterwards. The most frequently used adaptive design was group sequential design (n = 222, 90.6%), especially for neoplasm or cardiovascular disease trials. Among the other types of adaptive design, adaptive dose/treatment group selection (n = 21, 8.6%) and adaptive sample-size adjustment (n = 19, 7.8%) were frequently used. The adaptive randomization (n = 8, 3.3%) and adaptive seamless design (n = 6, 2.4%) were less frequent. Adaptive dose/treatment group selection and adaptive sample-size adjustment were frequently used (up to 23%) in "certain infectious and parasitic diseases," "diseases of nervous system," and "mental and behavioural disorders" in comparison with "neoplasms" (<6.6%). For "mental and behavioural disorders," adaptive randomization was used in two trials of eight trials in total (25%). Group sequential design and adaptive sample-size adjustment were used frequently in phase 3 trials or in trials where study phase was not specified, whereas the other types of adaptive designs were used more in phase 2 trials. Approximately 82% (202 of 245 trials) resulted in early termination at the interim analysis. Among the 202 trials, 132 (54% of 245 trials) had fewer randomized patients than initially planned. This result supports the motive to use adaptive design to make study durations shorter and include a smaller number of subjects. We found that adaptive designs have been applied to clinical trials in various therapeutic areas and interventions. The applications were frequently reported in neoplasm or cardiovascular clinical trials. The adaptive dose/treatment group selection and sample-size adjustment are increasingly common, and these adaptations generally follow the Food and Drug Administration's (FDA's) recommendations. © 2017 John Wiley & Sons Ltd.

Data base architecture for instrument characteristics critical to spacecraft conceptual design

NASA Technical Reports Server (NTRS)

Rowell, Lawrence F.; Allen, Cheryl L.

1990-01-01

Spacecraft designs are driven by the payloads and mission requirements that they support. Many of the payload characteristics, such as mass, power requirements, communication requirements, moving parts, and so forth directly affect the choices for the spacecraft structural configuration and its subsystem design and component selection. The conceptual design process, which translates mission requirements into early spacecraft concepts, must be tolerant of frequent changes in the payload complement and resource requirements. A computer data base was designed and implemented for the purposes of containing the payload characteristics pertinent for spacecraft conceptual design, tracking the evolution of these payloads over time, and enabling the integration of the payload data with engineering analysis programs for improving the efficiency in producing spacecraft designs. In-house tools were used for constructing the data base and for performing the actual integration with an existing program for optimizing payload mass locations on the spacecraft.

Measuring, Enabling and Comparing Modularity, Regularity and Hierarchy in Evolutionary Design

NASA Technical Reports Server (NTRS)

Hornby, Gregory S.

2005-01-01

For computer-automated design systems to scale to complex designs they must be able to produce designs that exhibit the characteristics of modularity, regularity and hierarchy - characteristics that are found both in man-made and natural designs. Here we claim that these characteristics are enabled by implementing the attributes of combination, control-flow and abstraction in the representation. To support this claim we use an evolutionary algorithm to evolve solutions to different sizes of a table design problem using five different representations, each with different combinations of modularity, regularity and hierarchy enabled and show that the best performance happens when all three of these attributes are enabled. We also define metrics for modularity, regularity and hierarchy in design encodings and demonstrate that high fitness values are achieved with high values of modularity, regularity and hierarchy and that there is a positive correlation between increases in fitness and increases in modularity. regularity and hierarchy.

A matched case-control study of convenience store robbery risk factors.

PubMed

Hendricks, S A; Landsittel, D P; Amandus, H E; Malcan, J; Bell, J

1999-11-01

Convenience store clerks have been shown to be at high risk for assault and homicide, mostly owing to robbery or robbery attempts. Although the literature consistently indicates that at least some environmental designs are effective deterrents of robbery, the significance of individual interventions and policies has differed across past studies. To address these issues, a matched case-control study of 400 convenience store robberies in three metropolitan areas of Virginia was conducted. Conditional logistic regression was implemented to evaluate the significance of various environmental designs and other factors possibly related to convenience store robbery. Findings indicate that numerous characteristics of the surrounding environment and population were significantly associated with convenience store robbery. Results also showed that, on a univariate level, most crime prevention factors were significantly associated with a lower risk for robbery. Using a forward selection process, a multivariate model, which included cash handling policy, bullet-resistant shielding, and numerous characteristics of the surrounding area and population, was identified. This study addressed numerous limitations of the previous literature by prospectively collecting extensive data on a large sample of diverse convenience stores and directly addressing the current theory on the robbers' selection of a target store through a matched case-control design.

[Survey of what is published on Italian nursing journals].

PubMed

Bongiorno, Elena; Colleoni, Pasqualina; Casati, Monica

2005-01-01

Nursing research is an important activity for nurses; the main aim is to improve the quality of nursing. Several national and european laws have been issued about it. To develop knowledge about nursing, nurses have to understand the results of researches, implement them in the different situation and sometimes carry out researches. The results can be published in nursing journals which a lot of nurses use to share information. This study reviewed the characteristics of research articles published in italian nursing journals from 1998 to 2003. Phenomena of interest are: areas of enquiry, investigators, methods, research design, sampling and means to gather data. 122 articles have been reviewed: 78% focus on clinical aspects, 55% were carry out by nurses, 92% adopt the quantitative approach, 90% used non experimental design, 89% used convenience selection sampling method and 58% answer ways. The characteristics of this study are similar to other studies about italian nursing publication. There are some limits in this type of literature: lower generalization because of lower representativeness of sample, convenience selection sampling method, and higher risk of interference due to frequent use of non experimental design. However the number of italian nurses that carry out researches is increasing and nursing is the most studied area.

Characterizing the Experimental Procedure in Science Laboratories: A preliminary step towards students experimental design

NASA Astrophysics Data System (ADS)

Girault, Isabelle; d'Ham, Cedric; Ney, Muriel; Sanchez, Eric; Wajeman, Claire

2012-04-01

Many studies have stressed students' lack of understanding of experiments in laboratories. Some researchers suggest that if students design all or parts of entire experiment, as part of an inquiry-based approach, it would overcome certain difficulties. It requires that a procedure be written for experimental design. The aim of this paper is to describe the characteristics of a procedure in science laboratories, in an educational context. As a starting point, this paper proposes a model in the form of a hierarchical task diagram that gives the general structure of any procedure. This model allows both the analysis of existing procedures and the design of a new inquiry-based approach. The obtained characteristics are further organized into criteria that can help both teachers and students assess a procedure during and after its writing. These results are obtained through two different sets of data. First, the characteristics of procedures are established by analysing laboratory manuals. This allows the organization and type of information in procedures to be defined. This analysis reveals that students are seldom asked to write a full procedure, but sometimes have to specify tasks within a procedure. Secondly, iterative interviews are undertaken with teachers. This leads to the list of criteria to evaluate the procedure.

Experimental Design and Data Analysis in Receiver Operating Characteristic Studies: Lessons Learned from Reports in Radiology from 1997 to 20061

PubMed Central

Shiraishi, Junji; Pesce, Lorenzo L.; Metz, Charles E.; Doi, Kunio

2009-01-01

Purpose: To provide a broad perspective concerning the recent use of receiver operating characteristic (ROC) analysis in medical imaging by reviewing ROC studies published in Radiology between 1997 and 2006 for experimental design, imaging modality, medical condition, and ROC paradigm. Materials and Methods: Two hundred ninety-five studies were obtained by conducting a literature search with PubMed with two criteria: publication in Radiology between 1997 and 2006 and occurrence of the phrase “receiver operating characteristic.” Studies returned by the query that were not diagnostic imaging procedure performance evaluations were excluded. Characteristics of the remaining studies were tabulated. Results: Two hundred thirty-three (79.0%) of the 295 studies reported findings based on observers' diagnostic judgments or objective measurements. Forty-three (14.6%) did not include human observers, with most of these reporting an evaluation of a computer-aided diagnosis system or functional data obtained with computed tomography (CT) or magnetic resonance (MR) imaging. The remaining 19 (6.4%) studies were classified as reviews or meta-analyses and were excluded from our subsequent analysis. Among the various imaging modalities, MR imaging (46.0%) and CT (25.7%) were investigated most frequently. Approximately 60% (144 of 233) of ROC studies with human observers published in Radiology included three or fewer observers. Conclusion: ROC analysis is widely used in radiologic research, confirming its fundamental role in assessing diagnostic performance. However, the ROC studies reported in Radiology were not always adequate to support clear and clinically relevant conclusions. © RSNA, 2009 Supplemental material: http://radiology.rsna.org/lookup/suppl/doi:10.1148/radiol.2533081632/-/DC1 PMID:19864510

A study on the flow characteristics of a direct drive turbine for energy conversion generation by experiment and CFD

NASA Astrophysics Data System (ADS)

Cho, Y. J.; Zullah, M. A.; Faizal, M.; Choi, Y. D.; Lee, Y. H.

2012-11-01

A variety of technologies has been proposed to capture the energy from waves. Some of the more promising designs are undergoing demonstration testing at commercial scales. Due to the complexity of most offshore wave energy devices and their motion response in different sea states, physical tank tests are common practice for WEC design. Full scale tests are also necessary, but are expensive and only considered once the design has been optimized. Computational Fluid Dynamics (CFD) is now recognized as an important complement to traditional physical testing techniques in offshore engineering. Once properly calibrated and validated to the problem, CFD offers a high density of test data and results in a reasonable timescale to assist with design changes and improvements to the device. The purpose of this study is to investigate the performance of a newly developed direct drive hydro turbine (DDT), which will be built in a caisson for extraction of wave energy. Experiments and CFD analysis are conducted to clarify the turbine performance and internal flow characteristics. The results show that commercial CFD code can be applied successfully to the simulation of the wave motion in the water tank. The performance of the turbine for wave energy converter is studied continuously for a ongoing project.

Development of monofilar rotor hub vibration absorber

NASA Technical Reports Server (NTRS)

Duh, J.; Miao, W.

1983-01-01

A design and ground test program was conducted to study the performance of the monofilar absorber for vibration reduction on a four-bladed helicopter. A monofilar is a centrifugal tuned two degree-of-freedom rotor hub absorber that provides force attenuation at two frequencies using the same dynamic mass. Linear and non-linear analyses of the coupled monofilar/airframe system were developed to study tuning and attenuation characteristics. Based on the analysis, a design was fabricated and impact bench tests verified the calculated non-rotating natural frequencies and mode shapes. Performance characteristics were measured using a rotating absorber test facility. These tests showed significant attenuation of fixed-system 4P hub motions due to 3P inplane rotating-system hub forces. In addition, detuning effects of the 3P monofilar modal response were small due to the nonlinearities and tuning pin slippage. However, attenuation of 4P hub motions due to 5P inplane hub forces was poor. The performance of the 5P monofilar modal response was degraded by torsional motion of the dynamic mass relative to the support arm which resulted in binding of the dynamic components. Analytical design studies were performed to evaluate this torsional motion problem. An alternative design is proposed which may alleviate the torsional motion of the dynamic mass.

Development of ADOCS controllers and control laws. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Landis, Kenneth H.; Glusman, Steven I.

1985-01-01

The Advanced Cockpit Controls/Advanced Flight Control System (ACC/AFCS) study was conducted by the Boeing Vertol Company as part of the Army's Advanced Digital/Optical Control System (ADOCS) program. Specifically, the ACC/AFCS investigation was aimed at developing the flight control laws for the ADOCS demonstrator aircraft that will provide satisfactory handling qualities for an attack helicopter mission. The three major elements of design considered during the study are as follows: Pilot's integrated Side-Stick Controller (SSC) -- Number of axes controlled; force/displacement characteristics; ergonomic design. Stability and Control Augmentation System (SCAS)--Digital flight control laws for the various mission phases; SCAS mode switching logic. Pilot's Displays--For night/adverse weather conditions, the dynamics of the superimposed symbology presented to the pilot in a format similar to the Advanced Attack Helicopter (AAH) Pilot Night Vision System (PNVS) for each mission phase as a function of SCAS characteristics; display mode switching logic. Volume 1 is an Executive Summary of the study. Conclusions drawn from analysis of pilot rating data and commentary were used to formulate recommendations for the ADOCS demonstrator flight control system design. The ACC/AFCS simulation data also provide an extensive data base to aid the development of advanced flight control system design for future V/STOL aircraft.