Orthogonalizing EM: A design-based least squares algorithm.

PubMed

Xiong, Shifeng; Dai, Bin; Huling, Jared; Qian, Peter Z G

We introduce an efficient iterative algorithm, intended for various least squares problems, based on a design of experiments perspective. The algorithm, called orthogonalizing EM (OEM), works for ordinary least squares and can be easily extended to penalized least squares. The main idea of the procedure is to orthogonalize a design matrix by adding new rows and then solve the original problem by embedding the augmented design in a missing data framework. We establish several attractive theoretical properties concerning OEM. For the ordinary least squares with a singular regression matrix, an OEM sequence converges to the Moore-Penrose generalized inverse-based least squares estimator. For ordinary and penalized least squares with various penalties, it converges to a point having grouping coherence for fully aliased regression matrices. Convergence and the convergence rate of the algorithm are examined. Finally, we demonstrate that OEM is highly efficient for large-scale least squares and penalized least squares problems, and is considerably faster than competing methods when n is much larger than p . Supplementary materials for this article are available online.

40 CFR 85.525 - Applicable standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... prohibition, vehicles/engines that have been converted to operate on a different fuel must meet emission standards and related requirements as follows: (a) The modified vehicle/engine must meet the requirements that applied for the OEM vehicle/engine, or the most stringent OEM vehicle/engine standards in any...

40 CFR 89.602 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... importer (ICI). An importer who is not an original engine manufacturer (OEM) (see definition below), but is... independent commercial importer (ICI) is deemed to have produced a nonroad engine when the ICI has modified... changes in nonroad engine configuration, equipment, or calibration which are made by an OEM or ICI in the...

40 CFR 89.602 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... importer (ICI). An importer who is not an original engine manufacturer (OEM) (see definition below), but is... independent commercial importer (ICI) is deemed to have produced a nonroad engine when the ICI has modified... changes in nonroad engine configuration, equipment, or calibration which are made by an OEM or ICI in the...

40 CFR 89.602 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... importer (ICI). An importer who is not an original engine manufacturer (OEM) (see definition below), but is... independent commercial importer (ICI) is deemed to have produced a nonroad engine when the ICI has modified... changes in nonroad engine configuration, equipment, or calibration which are made by an OEM or ICI in the...

40 CFR 89.602 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... importer (ICI). An importer who is not an original engine manufacturer (OEM) (see definition below), but is... independent commercial importer (ICI) is deemed to have produced a nonroad engine when the ICI has modified... changes in nonroad engine configuration, equipment, or calibration which are made by an OEM or ICI in the...

Advancements for continuous miners

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fiscor, S.

2007-06-15

Design changes and new technology make the modern continuous miner more user friendly. Two of the major manufacturers, Joy Mining Machinery and DBT, both based near Pittsburgh, PA, USA, have recently acquired other OEMs to offer a greater product line. Joy's biggest development in terms of improving cutting time is the FACEBOSS Control System which has an operator assistance element and Joy Surface Reporting Software (JSRP). Joy's WetHead continuous miners have excellent performance. DBT is researching ways to make the machines more reliable with new drive systems. It has also been experimenting with water sprays to improve dust suppression. 4more » photos.« less

New Automotive Air Conditioning System Simulation Tool Developed in MATLAB/Simulink

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiss, T.; Chaney, L.; Meyer, J.

Further improvements in vehicle fuel efficiency require accurate evaluation of the vehicle's transient total power requirement. When operated, the air conditioning (A/C) system is the largest auxiliary load on a vehicle; therefore, accurate evaluation of the load it places on the vehicle's engine and/or energy storage system is especially important. Vehicle simulation software, such as 'Autonomie,' has been used by OEMs to evaluate vehicles' energy performance. A transient A/C simulation tool incorporated into vehicle simulation models would also provide a tool for developing more efficient A/C systems through a thorough consideration of the transient A/C system performance. The dynamic systemmore » simulation software Matlab/Simulink was used to develop new and more efficient vehicle energy system controls. The various modeling methods used for the new simulation tool are described in detail. Comparison with measured data is provided to demonstrate the validity of the model.« less

Orthogonalizing EM: A design-based least squares algorithm

PubMed Central

Xiong, Shifeng; Dai, Bin; Huling, Jared; Qian, Peter Z. G.

2016-01-01

We introduce an efficient iterative algorithm, intended for various least squares problems, based on a design of experiments perspective. The algorithm, called orthogonalizing EM (OEM), works for ordinary least squares and can be easily extended to penalized least squares. The main idea of the procedure is to orthogonalize a design matrix by adding new rows and then solve the original problem by embedding the augmented design in a missing data framework. We establish several attractive theoretical properties concerning OEM. For the ordinary least squares with a singular regression matrix, an OEM sequence converges to the Moore-Penrose generalized inverse-based least squares estimator. For ordinary and penalized least squares with various penalties, it converges to a point having grouping coherence for fully aliased regression matrices. Convergence and the convergence rate of the algorithm are examined. Finally, we demonstrate that OEM is highly efficient for large-scale least squares and penalized least squares problems, and is considerably faster than competing methods when n is much larger than p. Supplementary materials for this article are available online. PMID:27499558

Electrostatic odd symmetric eigenmode in inhomogeneous Bernstein-Greene-Kruskal equilibrium

NASA Astrophysics Data System (ADS)

Woo, M.-H.; Dokgo, K.; Yoon, Peter H.; Lee, D.-Y.; Choi, Cheong R.

2018-04-01

A self-consistent electrostatic odd-symmetric eigenmode (OEM) is analytically found in a solitary type Bernstein-Greene-Kruskal (BGK) equilibrium. The frequency of the OEM is order of the electron bounce frequency and it is spatially odd-symmetric with the scale comparable to that of the solitary BGK equilibrium structure. Such an OEM is consistent with the recent observation from particle-in-cell simulation of the solitary wave [Dokgo et al., Phys. Plasmas 23, 092107 (2016)]. The mode can be driven unstable by trapped electrons within the hole structure of the solitary wave. Such a low frequency, pure electron mode, which may possibly interact resonantly with the ion acoustic mode, provides a possible damping mechanism of the BGK equilibrium.

WEBSLIDE: A "Virtual" Slide Projector Based on World Wide Web.

ERIC Educational Resources Information Center

Barra, Maria; Ferrandino, Salvatore; Scarano, Vittorio

1999-01-01

Presents the key design concepts of a software project whose objective is to provide a simple, cheap, and efficient solution for showing slides during lessons in computer labs. Contains 26 references. (DDR)

Secure Control Systems for the Energy Sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Rhett; Campbell, Jack; Hadley, Mark

2012-03-31

Schweitzer Engineering Laboratories (SEL) will conduct the Hallmark Project to address the need to reduce the risk of energy disruptions because of cyber incidents on control systems. The goals is to develop solutions that can be both applied to existing control systems and designed into new control systems to add the security measures needed to mitigate energy network vulnerabilities. The scope of the Hallmark Project contains four primary elements: 1. Technology transfer of the Secure Supervisory Control and Data Acquisition (SCADA) Communications Protocol (SSCP) from Pacific Northwest National Laboratories (PNNL) to Schweitzer Engineering Laboratories (SEL). The project shall use thismore » technology to develop a Federal Information Processing Standard (FIPS) 140-2 compliant original equipment manufacturer (OEM) module to be called a Cryptographic Daughter Card (CDC) with the ability to directly connect to any PC enabling that computer to securely communicate across serial to field devices. Validate the OEM capabilities with another vendor. 2. Development of a Link Authenticator Module (LAM) using the FIPS 140-2 validated Secure SCADA Communications Protocol (SSCP) CDC module with a central management software kit. 3. Validation of the CDC and Link Authenticator modules via laboratory and field tests. 4. Creation of documents that record the impact of the Link Authenticator to the operators of control systems and on the control system itself. The information in the documents can assist others with technology deployment and maintenance.« less

Preparation of cherry-picked combinatorial libraries by string synthesis.

PubMed

Furka, Arpád; Dibó, Gábor; Gombosuren, Naran

2005-03-01

String synthesis [1-3] is an efficient and cheap manual method for preparation of combinatorial libraries by using macroscopic solid support units. Sorting the units between two synthetic steps is an important operation of the procedure. The software developed to guide sorting can be used only when complete combinatorial libraries are prepared. Since very often only selected components of the full libraries are needed, new software was constructed that guides sorting in preparation of non-complete combinatorial libraries. Application of the software is described in details.

An Integrated Economics Model for ISRU in Support of a Mars Colony - Initial Status Report

NASA Technical Reports Server (NTRS)

Shishko, Robert; Fradet, Rene; Saydam, Serkan; Tapia-Cortez, Carlos; Dempster, Andrew G.; Coulton, Jeff

2015-01-01

The aim of this effort is to develop an integrated set of risk-based financial and technical models to evaluate multiple Off-Earth Mining (OEM) scenarios. This quantitative, scenario- and simulation-based tool will help identify combinations of market variables, technical parameters, and policy levers that will enable the expansion of the global economy into the solar system and return economic benefits. Human ventures in space are entering a new phase in which missions formerly driven by government agencies are now being replaced by those led by commercial enterprises - in launch, satellite deployment, resupply of the International Space Station, and space tourism. In the not-too-distant future, commercial opportunities will also include the mining of asteroids, the Moon, and Mars. This investigation will examine the role of OEM in a growing space economy. (In this investigation, the term 'mining' is taken to embrace minerals, ice/water, and other in situ resources.) OEM can be the engine that drives the space economy, so it would be useful to understand what OEM market conditions and technology requirements are needed for that economy to prosper. These specific elements will be studied in the wider context of creating an economy that could ultimately support a sustainable Mars Colony. Such a colony will need in situ resources not only for its own survival, but to prosper and grow, it must create viable business ventures, essentially by fulfilling the demand for in situ resources from and on Mars. This investigation will focus on understanding the role and economic prospect for OEM associated with the Human Colonization of Mars (HCM).

Meteorological Data Quality from Original Equipment Manufacturer (OEM) Sensors on Commercial Vehicles

NASA Astrophysics Data System (ADS)

Chang, C. H.; Pietras, J.; Heppner, P.; Evans, J. D.; Wang, J.

2016-12-01

The Mobile Platform Environmental Data (MoPED) system acquires real-time data on weather conditions from commercial fleet providers and provides them to the National Weather Service (NWS) for use in operations and numerical models. The MoPED system assesses the quality of these data by comparing them to observations from airport weather stations when the mobile platforms are in sufficiently close proximity (in space and time). We have devised a set of quality control algorithms that are applied to vehicle observation datasets to qualify them for dissemination to NWS. Commercial vehicles participating in MoPED have a third-party suite of sensors for ambient air temperature, relative humidity, light level, precipitation intensity, atmospheric pressure, ozone, and road temperature. In addition, some vehicles also generate meteorological data from sensors built into the vehicles themselves (original equipment manufacturer (OEM) sensors) which conform to the SAE J1939 standard for onboard vehicle networking. These sensors, known as OEM J-data sensors, measure numerous parameters associated with emissions control and engine performance - including ambient air temperature and atmospheric pressure. Time-tagged and transmitted to the MoPED system, these OEM J-data measurements can be a tremendous source of weather data for NWS if they can be extracted and communicated in real-time from the vehicles. We are working with a commercial fleet (who have OEM J-data available) to determine suitability of these data for NWS. To ensure the overall quality of the data, we have developed a methodology for assessing the suitability of classes of vehicles and sensors for inclusion in the MoPED dissemination, for the continued assessment of individual vehicles once their class has been accepted into MoPED, and for identifying corrective measures (such as adjusting measurements to correct for individual sensor offsets). A byproduct of that methodology is a multi-component model for sources of errors in mobile meteorological data measurements. We describe this error model, and provide examples of studies of candidate OEM J-data vehicle fleets in which we measured or compensated for various components of the error model.

Educational Software for Interference and Optical Diffraction Analysis in Fresnel and Fraunhofer Regions Based on MATLAB GUIs and the FDTD Method

ERIC Educational Resources Information Center

Frances, J.; Perez-Molina, M.; Bleda, S.; Fernandez, E.; Neipp, C.; Belendez, A.

2012-01-01

Interference and diffraction of light are elementary topics in optics. The aim of the work presented here is to develop an accurate and cheap optical-system simulation software that provides a virtual laboratory for studying the effects of propagation in both time and space for the near- and far-field regions. In laboratory sessions, this software…

Non-OEM experience with NOx reduction applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birchett, K.S.; Chung, L.; Caldwell, R.E.

1996-01-01

Heightened global environmental awareness and mandated deadlines for emission compliance required by the Clean Air Act, demand operators to increase controls on boiler emissions. For decades, the utility boiler industry has been dominated by the large OEM`s. In the past, boiler owners would approach the company that originally designed the boiler or burner system to design a burner system to reduce emissions. It was commonly believed that the boiler manufacturer had the greatest expertise in the area of NO{sub x} reduction. Current experience demonstrates that boiler owners are accepting new approaches to reducing NO{sub x} from non-OEM designers and suppliers.more » This paper outlines new approaches being applied by boiler operators to reduce NO{sub x} emissions. Several steps are imperative for a successful NO{sub x} reduction program and each step of this process will be described with examples presented. Concepts that will be examined are: (1) Practical designing concerns of theoretical Low NO{sub x} combustion, (2) Reviewing scope requirements required to reduce emissions, and (3) Teaming with the Customer to facilitate retrofit design and installation. The emphasis of this paper is not directed at the theory of how the components reduce NO{sub x}, but how to effectively apply proven technology that reduced NO{sub x} emissions.« less

Adaptive control of nonlinear system using online error minimum neural networks.

PubMed

Jia, Chao; Li, Xiaoli; Wang, Kang; Ding, Dawei

2016-11-01

In this paper, a new learning algorithm named OEM-ELM (Online Error Minimized-ELM) is proposed based on ELM (Extreme Learning Machine) neural network algorithm and the spreading of its main structure. The core idea of this OEM-ELM algorithm is: online learning, evaluation of network performance, and increasing of the number of hidden nodes. It combines the advantages of OS-ELM and EM-ELM, which can improve the capability of identification and avoid the redundancy of networks. The adaptive control based on the proposed algorithm OEM-ELM is set up which has stronger adaptive capability to the change of environment. The adaptive control of chemical process Continuous Stirred Tank Reactor (CSTR) is also given for application. The simulation results show that the proposed algorithm with respect to the traditional ELM algorithm can avoid network redundancy and improve the control performance greatly. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Predictive modeling for corrective maintenance of imaging devices from machine logs.

PubMed

Patil, Ravindra B; Patil, Meru A; Ravi, Vidya; Naik, Sarif

2017-07-01

In the cost sensitive healthcare industry, an unplanned downtime of diagnostic and therapy imaging devices can be a burden on the financials of both the hospitals as well as the original equipment manufacturers (OEMs). In the current era of connectivity, it is easier to get these devices connected to a standard monitoring station. Once the system is connected, OEMs can monitor the health of these devices remotely and take corrective actions by providing preventive maintenance thereby avoiding major unplanned downtime. In this article, we present an overall methodology of predicting failure of these devices well before customer experiences it. We use data-driven approach based on machine learning to predict failures in turn resulting in reduced machine downtime, improved customer satisfaction and cost savings for the OEMs. One of the use-case of predicting component failure of PHILIPS iXR system is explained in this article.

Design and Analysis of In0.53Ga0.47As/InP Symmetric Gain Optoelectronic Mixers

DTIC Science & Technology

2010-01-01

Adding gain to the OEM allows the following transimpedance amplifier ?s gain to be reduced, increasing bandwidth and improving the system?s noise...following transimpedance ampli- fier’s gain to be reduced, increasing bandwidth and improving the system’s noise performance. A sym- metric gain...is also obtained. As the OEM output is the low frequency difference signal, the gain of the following trans- impedance amplifier (TZA) can be increased

Final Report on Oxygen Plant Development (Employing Regenerative Chemicals)

DTIC Science & Technology

1945-05-31

Furn:t3 at NDRC Washington Office, May 25, 1942. Air Transported or^t (P- S ) JJ. W. Kellogg Company letter from Walter E. Lobo to C. C. Furnas at...Chemjcalfl) la National Defense Reaearcft fonmimfe.e, Ely. The M. ff. Kellogg Company Contract t’lo. OEM-sr-565 And American Machine Defense...Corporation Contract No. OEM-sr-499 Submitted by» Walter G. Lot for The M. 1». Kellogg Company March 16, 1945 ß;&*e&’ OCCM3, C. Bockius for

[Medical and dental digital photography. Choosing a cheap and user-friendly camera].

PubMed

Chossegros, C; Guyot, L; Mantout, B; Cheynet, F; Olivi, P; Blanc, J-L

2010-04-01

Digital photography is more and more important in our everyday medical practice. Patient data, medico-legal proof, remote diagnosis, forums, and medical publications are some of the applications of digital photography in medical and dental fields. A lot of small, light, and cheap cameras are on the market. The main issue is to obtain good, reproducible, cheap, and easy-to-shoot pictures. Every medical situation, portrait in esthetic surgery, skin photography in dermatology, X-ray pictures or intra-oral pictures, for example, has its own requirements. For these reasons, we have tried to find an "ideal" compact digital camera. The Sony DSC-T90 (and its T900 counterpart with a wider screen) seems a good choice. Its small size makes it usable in every situation and its price is low. An external light source and a free photo software (XnView((R))) can be useful complementary tools. The main adjustments and expected results are discussed.

Instruction manual, optical effects module electronic controller and processor, model OEMCP

NASA Technical Reports Server (NTRS)

1975-01-01

The OEM-1 electronic module is discussed; it is comprised of four subsystems: the signal processing and display; the stepper motor controls; the chopper controls; and the dc-dc invertor. The OEM-1 module controls the sample wheel so that the relative transmittance of the samples can be compared to the clear aperture position. The 3-1/2 digit digital voltmeter displays the clear aperture signal level as well as the ratio of the remaining sample positions relative to the clear aperture position. The sample wheel position is decoded so that the signals and ratios can be correlated to the data. The OEM is automatically reset to the I sub o on initial turn-on and can be reset to the '0' position by actuating a front panel switch. The sample wheel can be interrupted to change samples or induce a longer integration time if desired by a front panel command. Integration times from 1 - 50 seconds are provided at the front panel, and BCD data for external interfacing is provided.

Underwater and hyperbaric medicine as a branch of occupational and environmental medicine.

PubMed

Lee, Young Il; Ye, Byeong Jin

2013-12-19

Exposure to the underwater environment for occupational or recreational purposes is increasing. As estimated, there are around 7 million divers active worldwide and 300,000 more divers in Korea. The underwater and hyperbaric environment presents a number of risks to the diver. Injuries from these hazards include barotrauma, decompression sickness, toxic effects of hyperbaric gases, drowning, hypothermia, and dangerous marine animals. For these reasons, primary care physicians should understand diving related injuries and assessment of fitness to dive. However, most Korean physicians are unfamiliar with underwater and hyperbaric medicine (UHM) in spite of scientific and practical values.From occupational and environmental medicine (OEM) specialist's perspective, we believe that UHM should be a branch of OEM because OEM is an area of medicine that deals with injuries caused by physical and biological hazards, clinical toxicology, occupational diseases, and assessment of fitness to work. To extend our knowledge about UHM, this article will review and update on UHM including barotrauma, decompression illness, toxicity of diving gases and fitness for diving.

An off-the-shelf guider for the Palomar 200-inch telescope: interfacing amateur astronomy software with professional telescopes for an easy life

NASA Astrophysics Data System (ADS)

Clarke, Fraser; Lynn, James; Thatte, Niranjan; Tecza, Matthias

2014-08-01

We have developed a simple but effective guider for use with the Oxford-SWIFT integral field spectrograph on the Palomar 200-inch telescope. The guider uses mainly off-the-shelf components, including commercial amateur astronomy software to interface with the CCD camera, calculating guiding corrections, and send guide commands to the telescope. The only custom piece of software is an driver to provide an interface between the Palomar telescope control system and the industry standard 'ASCOM' system. Using existing commercial software provided a very cheap guider (<$5000) with minimal (<15 minutes) commissioning time. The final system provides sub-arcsecond guiding, and could easily be adapted to any other professional telescope

The Impact of New Technology on the Accounting Curriculum.

ERIC Educational Resources Information Center

Shaoul, Jean

This paper analyzes ways in which the new, relatively cheap, user friendly technology and associated software is changing the way that accounting is being taught. Techniques that have been available, in principle, for years, are now widely available. The newer techniques stress decision making for planning, and, to a lesser extent, control, in…

Service contract with periodic preventive maintenance for a dump truck sold with a two-dimensional warranty

NASA Astrophysics Data System (ADS)

Nasrum, A.; Pasaribu, U. S.; Husniah, H.

2016-02-01

This paper deals with maintenance service contract for a dump truck sold with a two-dimensional warranties. We consider a situation where an agent offers two maintenance contract options and the owner of the equipment has to select the optimal option either the OEM carried out all repairs and preventive maintenance activities (option one) or the OEM only carries out failure while the costumer undertakes preventive maintenance action in-house (option two). As the number of preventive maintenance and corrective maintenance that occurs in the area of servicing contracts is very influential in determining the value of the contract, we have to determine the optimal time between preventive maintenance that can minimize the cost of repair in the contract area. Moreover, we also study the maintenance service contract considering reduction of the intensity function after preventive maintenance from both the owner and OEM point of views. In this paper, we use a Weibull intensity function to consider a product with increasing failure intensity. We use a non-cooperative game formulation to determine the optimal price structure (i.e., the contract price and repair cost) for the OEM and the owner. A numerical example derived from the model has shown that if the owner choose option one then the owner obtain a higher profit compared with the profit resulted from option two. The result agree with earlier work which uses the accelerated failure time (AFT) for the failure modeling, while here we model the failure of the dump truck without the use of the AFT.

Improving hydraulic excavator performance through in line hydraulic oil contamination monitoring

NASA Astrophysics Data System (ADS)

Ng, Felix; Harding, Jennifer A.; Glass, Jacqueline

2017-01-01

It is common for original equipment manufacturers (OEMs) of high value products to provide maintenance or service packages to customers to ensure their products are maintained at peak efficiency throughout their life. To quickly and efficiently plan for maintenance requirements, OEMs require accurate information about the use and wear of their products. In recent decades, the aerospace industry in particular has become expert in using real time data for the purpose of product monitoring and maintenance scheduling. Significant quantities of real time usage data from product monitoring are commonly generated and transmitted back to the OEMs, where diagnostic and prognostic analysis will be carried out. More recently, other industries such as construction and automotive, are also starting to develop capabilities in these areas and condition based maintenance (CBM) is increasing in popularity as a means of satisfying customers' demands. CBM requires constant monitoring of real time product data by the OEMs, however the biggest challenge for these industries, in particular construction, is the lack of accurate and real time understanding of how their products are being used possibly because of the complex supply chains which exist in construction projects. This research focuses on current dynamic data acquisition techniques for mobile hydraulic systems, in this case the use of a mobile inline particle contamination sensor; the aim was to assess suitability to achieve both diagnostic and prognostic requirements of Condition Based Maintenance. It concludes that hydraulic oil contamination analysis, namely detection of metallic particulates, offers a reliable way to measure real time wear of hydraulic components.

Responsibilities of the Occupational and Environmental Medicine Provider in the Treatment and Prevention of Climate Change-Related Health Problems.

PubMed

Perkison, William B; Kearney, Gregory D; Saberi, Pouné; Guidotti, Tee; McCarthy, Ronda; Cook-Shimanek, Margaret; Pensa, Mellisa A; Nabeel, Ismail

2018-02-01

: Workers are uniquely susceptible to the health hazards imposed by environmental changes. Occupational and environmental medicine (OEM) providers are at the forefront of emerging health issues pertaining to working populations including climate change, and must be prepared to recognize, respond to, and mitigate climate change-related health effects in workers. This guidance document from the American College of Occupational and Environmental Medicine focuses on North American workers health effects that may occur as a result of climate change and describes the responsibilities of the OEM provider in responding to these health challenges.

OEM fiber laser rangefinder for long-distance measurement

NASA Astrophysics Data System (ADS)

Corman, Alexandre; Chiquet, Frédéric; Avisse, Thomas; Le Flohic, Marc

2015-05-01

SensUp designs and manufactures electro-optical systems based on laser technology, in particular from fiber lasers. Indeed, that kind of source enables us to get a significant peak power with huge repetition rates at the same time, thus combining some characteristics of the two main technologies on the telemetry field today: laser diodes and solid-state lasers. The OEM (Original Equipment Manufacturer) fiber Laser RangeFinder (LRF) set out below, aims to fit the SWaP (Size Weight and Power) requirements of military markets, and might turn out to be a real alternative to other technologies usually used in range finding systems.

Effects of endurance exercise training, metformin, and their combination on adipose tissue leptin and IL-10 secretion in OLETF rats

PubMed Central

Padilla, Jaume; Arce-Esquivel, Arturo A.; Bayless, David S.; Martin, Jeffrey S.; Leidy, Heather J.; Booth, Frank W.; Rector, R. Scott; Laughlin, M. Harold

2012-01-01

Adipose tissue inflammation plays a role in cardiovascular (CV) and metabolic diseases associated with obesity, insulin resistance, and type 2 diabetes mellitus (T2DM). The interactive effects of exercise training and metformin, two first-line T2DM treatments, on adipose tissue inflammation are not known. Using the hyperphagic, obese, insulin-resistant Otsuka Long-Evans Tokushima Fatty (OLETF) rat model, we tested the hypothesis that treadmill training, metformin, or a combination of these reduces the secretion of proinflammatory cytokines from adipose tissue. Compared with Long-Evans Tokushima Otsuka (LETO) control rats (L-Sed), sedentary OLETF (O-Sed) animals secreted significantly greater amounts of leptin from retroperitoneal adipose tissue. Conversely, secretion of interleukin (IL)-10 by O-Sed adipose tissue was lower than that in L-Sed animals. Examination of leptin and IL-10 secretion from adipose tissue in OLETF groups treated with endurance exercise training (O-EndEx), metformin treatment (O-Met), and a combination of these (O-E+M) from 20 to 32 wk of age indicated that 1) leptin secretion from adipose tissue was reduced in O-Met and O-E+M, but not O-EndEx animals; 2) adipose tissue IL-10 secretion was increased in O-EndEx and O-E+M but not in O-Met animals; and 3) only the combined treatment (O-E+M) displayed both a reduction in leptin secretion and an increase in IL-10 secretion. Leptin and IL-10 concentrations in adipose tissue–conditioned buffers were correlated with their plasma concentrations, adipocyte diameters, and total adiposity. Overall, this study indicates that exercise training and metformin have additive influences on adipose tissue secretion and plasma concentrations of leptin and IL-10. PMID:23019312

Implementing Project SIED: Special Education Teachers' Perceptions of a Simplified Technology Decision-Making Process for App Identification and Evaluation

ERIC Educational Resources Information Center

Schmidt, Matthew M.; Lin, Meng-Fen Grace; Paek, Seungoh; MacSuga-Gage, Ashley; Gage, Nicholas A.

2017-01-01

The worldwide explosion in popularity of mobile devices has created a dramatic increase in mobile software (apps) that are quick and easy to find and install, cheap, disposable, and usually single purpose. Hence, teachers need an equally streamlined and simplified decision-making process to help them identify educational apps--an approach that…

Technology demonstration of dedicated compressed natural gas (CNG) original equipment manufacturer (OEM) vehicles at Ft. Bliss, Texas. Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alvarez, R.A.; Yost, D.M.

1995-11-01

A technology demonstration program of dedicated compressed natural gas (CNG) original equipment manufacturer (OEM) vehicles was conducted at FL Bliss, Texas to demonstrate the use of CNG as an alternative fuel. The demonstration program at FL Bliss was the first Army initiative with CNG-fueled vehicles under the legislated Alternative Motor Fuels Act. This Department of Energy (DOE)-supported fleet demonstration consisted of 48 General Services Administration (GSA)-owned, Army-leased 1992 dedicated CNG General Motors (GM) 3/4-ton pickup trucks and four 1993 gasoline-powered Chevrolet 3/4-ton pickup trucks.

Don't Worry, Be Scrappy: Good, Cheap Tech for Schools, Cloud Computing and More

ERIC Educational Resources Information Center

Hastings, Jeffrey

2009-01-01

When asked to weigh in on what might be the next best thing in educational technology, the author scanned the horizon for the next gizmo or software advance that would eventually grow legs, rise up, and utterly transform the library profession. But what he saw was more about evolution than revolution. Sure, Windows Vista will become Windows 7, USB…

OEM Emergency Preparedness Information

EPA Pesticide Factsheets

The Office of Emergency Management compiles a wide variety of information in support of Emergency Preparedness, including certain elements of the System for Risk Management Plans (SRMP), a wide variety of training and guidance materials, inventories and readiness/O&M status of equipment and response personnel. Some of the data available to EPA for this emergency preparedness includes industry trade secret information.A major component of this data asset is information compiled in the Compendium of Environmental Testing Laboratories. This information allows OEM to direct samples recovered from emergency incidents to the appropriate laboratory certified to analyze the substances in question.Also included here are all types of field readiness information, training logs, and personnel contact information.

Optical effects module and passive sample array

NASA Technical Reports Server (NTRS)

Linton, R. C.

1983-01-01

The Optical Effects Module (OEM) has the objective to monitor the effects of the deposition and adhesion of both molecular species and particles on optical surfaces in the Shuttle cargo bay environment. The OEM performs inflight measurements of the ultraviolet (253.7 nm) transmittance and diffuse reflectance of five optical samples at regular intervals throughout the orbital mission. Most of the obtained results indicates or implies the absence of a significant accumulation of contamination other than particulates on the samples. The contaminant species (or particulates) adhering to the samples of the Passive Sample Array (PSA) were identified by means of Auger and X-ray energy dispersive analyses. The elements silicon, chlorine, and phosphorus were discovered.

Delivering Value In A Global Aerospace Manufacturer Through The Effective Use Of Numerical Process Simulation

NASA Astrophysics Data System (ADS)

Ward, M. J.; Walløe, S. J.

2004-06-01

Numerical models are used extensively in the aerospace sector to identify appropriate manufacturing parameters, and to minimize the risk associated with new product introduction and manufacturing change. This usage is equally prevalent in original equipment manufacturers (OEMs), and in their supply chains. The wide range of manufacturing processes and production environments involved, coupled with the varying degrees of technology maturity associated with numerical models of different processes leads to a situation of significant complexity from the OEM perspective. In addition, the intended use of simulation technology can vary considerably between applications, from simple geometric assessment of die shape at one extreme, to full process design or development at the other. Consequently there is an increasing trend towards multi-scale modelling, i.e. the use of several different model types, with differing attributes in terms of accuracy and speed to support a range of different new product introduction decisions. This makes the allocation of appropriate levels of activity to the research and implementation of new capabilities a difficult problem. This paper uses a number of industrial cases studies to illustrate a framework for making such allocation decisions such that value to the OEM is maximized, and investigates how such a framework is likely to shift over the next few years based on technological developments.

EO-Performance relationships in Reverse Internationalization by Chinese Global Startup OEMs: Social Networks and Strategic Flexibility.

PubMed

Chin, Tachia; Tsai, Sang-Bing; Fang, Kai; Zhu, Wenzhong; Yang, Dongjin; Liu, Ren-Huai; Tsuei, Richard Ting Chang

2016-01-01

Due to the context-sensitive nature of entrepreneurial orientation (EO), it is imperative to in-depth explore the EO-performance mechanism in China at its critical, specific stage of economic reform. Under the context of "reverse internationalization" by Chinese global startup original equipment manufacturers (OEMs), this paper aims to manifest the unique links and complicated interrelationships between the individual EO dimensions and firm performance. Using structural equation modeling, we found that during reverse internationalization, proactiveness is positively related to performance; risk taking is not statistically associated with performance; innovativeness is negatively related to performance. The proactiveness-performance relationship is mediated by Strategic flexibility and moderated by social networking relationships. The dynamic and complex institutional setting, coupled with the issues of overcapacity and rising labor cost in China may explain why our distinctive results occur. This research advances the understanding of how contingent factors (social network relationships and strategic flexibility) facilitate entrepreneurial firms to break down institutional barriers and reap the most from EO. It brings new insights into how Chinese global startup OEMs draw on EO to undertake reverse internationalization, responding the calls for unraveling the heterogeneous characteristics of EO sub-dimensions and for more contextually-embedded treatment of EO-performance associations.

EO-Performance relationships in Reverse Internationalization by Chinese Global Startup OEMs: Social Networks and Strategic Flexibility

PubMed Central

Chin, Tachia; Tsai, Sang-Bing; Fang, Kai; Zhu, Wenzhong; Yang, Dongjin; Liu, Ren-huai; Tsuei, Richard Ting Chang

2016-01-01

Due to the context-sensitive nature of entrepreneurial orientation (EO), it is imperative to in-depth explore the EO-performance mechanism in China at its critical, specific stage of economic reform. Under the context of “reverse internationalization” by Chinese global startup original equipment manufacturers (OEMs), this paper aims to manifest the unique links and complicated interrelationships between the individual EO dimensions and firm performance. Using structural equation modeling, we found that during reverse internationalization, proactiveness is positively related to performance; risk taking is not statistically associated with performance; innovativeness is negatively related to performance. The proactiveness-performance relationship is mediated by Strategic flexibility and moderated by social networking relationships. The dynamic and complex institutional setting, coupled with the issues of overcapacity and rising labor cost in China may explain why our distinctive results occur. This research advances the understanding of how contingent factors (social network relationships and strategic flexibility) facilitate entrepreneurial firms to break down institutional barriers and reap the most from EO. It brings new insights into how Chinese global startup OEMs draw on EO to undertake reverse internationalization, responding the calls for unraveling the heterogeneous characteristics of EO sub-dimensions and for more contextually-embedded treatment of EO-performance associations. PMID:27631368

Amplified Pilot Head Vibration and the Effects of Vibration Mitigation on Neck Muscle Strain.

PubMed

Wright Beatty, Heather E; Law, Andrew J; Thomas, J Russell; Wickramasinghe, Viresh

2018-06-01

Rotary wing pilot neck strain is increasing in prevalence due to the combined effects of head supported mass (e.g., Night Vision Goggles, head mounted displays) and whole-body vibration. This study examined the physiological responses of pilots during exposure to whole-body vibration (WBV) representative of the National Research Council's Bell 412 helicopter in forward flight. WBV levels were measured and evaluated using the ISO-2631-1-1997 WBV standards. Twelve pilots (aged 20-59 yr, 7 of the 12 with 20+ years flight experience) underwent six 15-min vibration trials on a human rated shaker platform. Participants were exposed to three vibration levels (-25%, normal, and +25% amplitude; Levels 1-3, respectively) while seated on an Original Equipment Manufacturer (OEM) or vibration mitigating (MIT) cushion. Upper back and neck electromyography (EMG) and acceleration were continuously recorded. Normalized EMG amplitude was higher using the OEM compared to the MIT during Level 2 (0.18 vs. -0.27) and Level 3 (0.24 vs. -0.14) for the anterior neck muscles. Health weighted vibration amplitude at the head (Mean of 3 levels: OEM = 1.19 and MIT = 1.11 m · s-2) was larger than the vibration amplitude at the seat (Mean of 3 levels: OEM = 0.77 and MIT = 0.70 m · s-2). The amplification of head vibration relative to the seat, and the significant effects of vibration level, as well as the vibration mitigation cushion, on neck EMG amplitude support the need for revisions to the ISO-2631-1 standard to account for the head and neck response to whole-body vibration.Wright Beatty HE, Law AJ, Thomas JR, Wickramasinghe V. Amplified pilot head vibration and the effects of vibration mitigation on neck muscle strain. Aerosp Med Hum Perform. 2018; 89(6):510-519.

Guaranteeing Spoof-Resilient Multi-Robot Networks

DTIC Science & Technology

2016-02-12

key-distribution. Our core contribution is a novel al- gorithm implemented on commercial Wi - Fi radios that can “sense” spoofers using the physics of...encrypted key exchange, but rather a commercial Wi - Fi card and software to implement our so- lution. Our virtual sensor leverages the rich physical...cheap commodity Wi - Fi radios, unlike hardware-based solutions [46, 48]. (3) It is robust to client mobility and power-scaling at- tacks. Finally, our

Experiential instruction in graduate-level preparation of speech-language pathology students in outer and middle ear screening.

PubMed

Serpanos, Yula C; Senzer, Deborah

2015-05-01

This study presents a piloted training model of experiential instruction in outer and middle ear (OE-ME) screening for graduate speech-language pathology students with peer teaching by doctor of audiology (AuD) students. Six individual experiential training sessions in screening otoscopy and tympanometry were conducted for 36 graduate-level speech-language pathology students led by a supervised AuD student. Postexperiential training, survey outcomes from 24 speech-language pathology students revealed a significant improvement (p = .01) in perceptions of attaining adequate knowledge and comfort in performing screening otoscopy (handheld and video otoscopy) and tympanometry. In a group of matched controls who did not receive experiential training in OE-ME screening (n = 24), ratings on the same learning outcomes survey in otoscopy and tympanometry were significantly poorer (p = .01) compared with students who did receive experiential training. A training model of experiential instruction for speech-language pathology students by AuD students improved learning outcomes, illustrating its promise in affecting clinical practices. The instructional model also meets the Council on Academic Accreditation in Audiology and Speech-Language Pathology (CAA; American Speech-Language-Hearing Association, 2008) and American Speech-Language-Hearing Association (2014) Certificate of Clinical Competence (ASHA CCC) standards for speech-language pathology in OE-ME screening and CAA (2008) and ASHA (2012) CCC standards in the supervisory process for audiology.

Dependence and power in healthcare equipment supply chains.

PubMed

de Jong, Jurriaan L; Benton, W C

2018-03-05

Most healthcare organizations (HCOs) engage Group Purchasing Organizations (GPOs) as an outsourcing strategy to secure their supplies and materials. When an HCO outsources the procurement function to a GPO, this GPO will directly interact with the HCO's supplier on the HCO's behalf. This study investigates how an HCO's dependence on a GPO affects supply chain relationships and power in the healthcare medical equipment supply chain. Hypotheses are tested through factor analysis and structural equation modeling, using primary survey data from HCO procurement managers. An HCO's dependence on a GPO is found to be positively associated with a GPO's reliance on mediated power, but, surprisingly, negatively associated with a GPO's mediated power. Furthermore, analysis indicates that an HCO's dependence on a GPO is positively associated with an HCO's dependence on a GPO-contracted Original Equipment Manufacturer (OEM). HCO reliance on GPOs may lead to a buyer's dependence trap, where HCOs are increasingly dependent on GPOs and OEMs. Implications for HCO procurement managers and recommended steps for mitigation are offered. Power-dependence relationships in the medical equipment supply chain are not consistent with relationships in other, more traditional, supply chains. While dependence in a supply chain relationship typically leads to an increase in reliance on mediated power, GPO-dependent HCOs instead perceive a decrease in GPO mediated power. Furthermore, HCOs that rely on procurement service from GPOs are increasingly dependent on the OEMs.

40 CFR 89.3 - Acronyms and abbreviations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ASME American Society of Mechanical Engineers ASTM American Society for Testing and Materials CAA Clean... Oxygen OEM Original equipment manufacturer PM Particulate matter SAE Society of Automotive Engineers SEA...

40 CFR 89.3 - Acronyms and abbreviations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ASME American Society of Mechanical Engineers ASTM American Society for Testing and Materials CAA Clean... Oxygen OEM Original equipment manufacturer PM Particulate matter SAE Society of Automotive Engineers SEA...

ELITE-3 active vibration isolation workstation

NASA Astrophysics Data System (ADS)

Anderson, Eric H.; Houghton, Bowie

2001-06-01

This paper describes the development and capabilities of ELITE-3, a product that incorporates piezoelectric actuators to provide ultrastable work surfaces for very high resolution wafer production, metrology, microscopy, and other applications. The electromechanical, electronic, and software/firmware parts of the ELITE-3 active workstation are described, with an emphasis on considerations relating to the piezoelectric transducers. Performance of the system and its relation to the smart materials is discussed. As the floor beneath a vibration-sensitive instrument supported by ELITE-3 moves, piezoelectrics are controlled to minimize the motion of the instrument. A digital signal processor (DSP) determines the appropriate signals to apply to the actuators. A PC-based interface allows reprogramming of control algorithms and resetting of other parameters within the firmware. The modular product allows incorporation of vibration isolator, actuator and sensor modules into original equipment manufacturer (OEM) products. Alternatively, a workstation can be integrated as an integrated standalone system. The paper describes the system architecture, overall approach to vibration isolation, and various system components, and summarizes motivations for key design approaches.

Argon-oxygen atmospheric pressure plasma treatment on carbon fiber reinforced polymer for improved bonding

NASA Astrophysics Data System (ADS)

Chartosias, Marios

Acceptance of Carbon Fiber Reinforced Polymer (CFRP) structures requires a robust surface preparation method with improved process controls capable of ensuring high bond quality. Surface preparation in a production clean room environment prior to applying adhesive for bonding would minimize risk of contamination and reduce cost. Plasma treatment is a robust surface preparation process capable of being applied in a production clean room environment with process parameters that are easily controlled and documented. Repeatable and consistent processing is enabled through the development of a process parameter window utilizing techniques such as Design of Experiments (DOE) tailored to specific adhesive and substrate bonding applications. Insight from respective plasma treatment Original Equipment Manufacturers (OEMs) and screening tests determined critical process factors from non-factors and set the associated factor levels prior to execution of the DOE. Results from mode I Double Cantilever Beam (DCB) testing per ASTM D 5528 [1] standard and DOE statistical analysis software are used to produce a regression model and determine appropriate optimum settings for each factor.

Analyzing Real-World Light Duty Vehicle Efficiency Benefits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gonder, Jeffrey; Wood, Eric; Chaney, Larry

Off-cycle technologies represent an important pathway to achieve real-world fuel savings, through which OEMs can potentially receive credit toward CAFE compliance. DOE national labs such as NREL are well positioned to provide objective input on these technologies using large, national data sets in conjunction with OEM- and technology-specific testing. This project demonstrates an approach that combines vehicle testing (dynamometer and on-road) with powertrain modeling and simulation over large, representative datasets to quantify real-world fuel economy. The approach can be applied to specific off-cycle technologies (engine encapsulation, start/stop, connected vehicle, etc.) in A/B comparisons to support calculation of realistic real-world impacts.more » Future work will focus on testing-based A/B technology comparisons that demonstrate the significance of this approach.« less

MEMS-based microprojection system with a 1.5cc optical engine

NASA Astrophysics Data System (ADS)

Kilcher, Lucio; Abelé, Nicolas

2012-03-01

Lemoptix develops next-generation of Micro-Opto-Electromechanical Systems (MOEMS)-based laser scanning and microprojection technologies and products for professional and industrial applications. Lemoptix LSCAN laser scanning micromirrors are designed to be integrated by OEM (original equipment manufacturer) customers into a number of applications such as printers and industrial sensors, enhancing performances and enabling the development of smaller, higher resolution and lower cost products. Lemoptix MVIEW, world's smallest laser microprojection systems are ideal for integration by OEMs and ODMs (original design manufacturers) into various demanding applications such as headup displays in cars or mobile devices. Embedded MVIEW modules will enable the projection of content and information directly from the device on any nearby surface, enabling users to conveniently view and share information and content without the typical limitations of physical displays.

A low-cost, computer-controlled robotic flower system for behavioral experiments.

PubMed

Kuusela, Erno; Lämsä, Juho

2016-04-01

Human observations during behavioral studies are expensive, time-consuming, and error prone. For this reason, automatization of experiments is highly desirable, as it reduces the risk of human errors and workload. The robotic system we developed is simple and cheap to build and handles feeding and data collection automatically. The system was built using mostly off-the-shelf components and has a novel feeding mechanism that uses servos to perform refill operations. We used the robotic system in two separate behavioral studies with bumblebees (Bombus terrestris): The system was used both for training of the bees and for the experimental data collection. The robotic system was reliable, with no flight in our studies failing due to a technical malfunction. The data recorded were easy to apply for further analysis. The software and the hardware design are open source. The development of cheap open-source prototyping platforms during the recent years has opened up many possibilities in designing of experiments. Automatization not only reduces workload, but also potentially allows experimental designs never done before, such as dynamic experiments, where the system responds to, for example, learning of the animal. We present a complete system with hardware and software, and it can be used as such in various experiments requiring feeders and collection of visitation data. Use of the system is not limited to any particular experimental setup or even species.

Quantitative analysis of tympanic membrane perforation: a simple and reliable method.

PubMed

Ibekwe, T S; Adeosun, A A; Nwaorgu, O G

2009-01-01

Accurate assessment of the features of tympanic membrane perforation, especially size, site, duration and aetiology, is important, as it enables optimum management. To describe a simple, cheap and effective method of quantitatively analysing tympanic membrane perforations. The system described comprises a video-otoscope (capable of generating still and video images of the tympanic membrane), adapted via a universal serial bus box to a computer screen, with images analysed using the Image J geometrical analysis software package. The reproducibility of results and their correlation with conventional otoscopic methods of estimation were tested statistically with the paired t-test and correlational tests, using the Statistical Package for the Social Sciences version 11 software. The following equation was generated: P/T x 100 per cent = percentage perforation, where P is the area (in pixels2) of the tympanic membrane perforation and T is the total area (in pixels2) for the entire tympanic membrane (including the perforation). Illustrations are shown. Comparison of blinded data on tympanic membrane perforation area obtained independently from assessments by two trained otologists, of comparative years of experience, using the video-otoscopy system described, showed similar findings, with strong correlations devoid of inter-observer error (p = 0.000, r = 1). Comparison with conventional otoscopic assessment also indicated significant correlation, comparing results for two trained otologists, but some inter-observer variation was present (p = 0.000, r = 0.896). Correlation between the two methods for each of the otologists was also highly significant (p = 0.000). A computer-adapted video-otoscope, with images analysed by Image J software, represents a cheap, reliable, technology-driven, clinical method of quantitative analysis of tympanic membrane perforations and injuries.

Implementation of Rosenbrock methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shampine, L. F.

1980-11-01

Rosenbrock formulas have shown promise in research codes for the solution of initial-value problems for stiff systems of ordinary differential equations (ODEs). To help assess their practical value, the author wrote an item of mathematical software based on such a formula. This required a variety of algorithmic and software developments. Those of general interest are reported in this paper. Among them is a way to select automatically, at every step, an explicit Runge-Kutta formula or a Rosenbrock formula according to the stiffness of the problem. Solving linear systems is important to methods for stiff ODEs, and is rather special formore » Rosenbrock methods. A cheap, effective estimate of the condition of the linear systems is derived. Some numerical results are presented to illustrate the developments.« less

Lens-free imaging of magnetic particles in DNA assays.

PubMed

Colle, Frederik; Vercruysse, Dries; Peeters, Sara; Liu, Chengxun; Stakenborg, Tim; Lagae, Liesbet; Del-Favero, Jurgen

2013-11-07

We present a novel opto-magnetic system for the fast and sensitive detection of nucleic acids. The system is based on a lens-free imaging approach resulting in a compact and cheap optical readout of surface hybridized DNA fragments. In our system magnetic particles are attracted towards the detection surface thereby completing the labeling step in less than 1 min. An optimized surface functionalization combined with magnetic manipulation was used to remove all nonspecifically bound magnetic particles from the detection surface. A lens-free image of the specifically bound magnetic particles on the detection surface was recorded by a CMOS imager. This recorded interference pattern was reconstructed in software, to represent the particle image at the focal distance, using little computational power. As a result we were able to detect DNA concentrations down to 10 pM with single particle sensitivity. The possibility of integrated sample preparation by manipulation of magnetic particles, combined with the cheap and highly compact lens-free detection makes our system an ideal candidate for point-of-care diagnostic applications.

Benchmarking of OEM Hybrid Electric Vehicles at NREL: Milestone Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, K. J.; Rajagopalan, A.

2001-10-26

A milestone report that describes the NREL's progress and activities related to the DOE FY2001 Annual Operating Plan milestone entitled ''Benchmark 2 new production or pre-production hybrids with ADVISOR.''

Product-line selection and pricing with remanufacturing under availability constraints

NASA Astrophysics Data System (ADS)

Aras, Necati; Esenduran, G.÷k.‡e.; Altinel, I. Kuban

2004-12-01

Product line selection and pricing are two crucial decisions for the profitability of a manufacturing firm. Remanufacturing, on the other hand, may be a profitable strategy that captures the remaining value in used products. In this paper we develop a mixed-integer nonlinear programming model form the perspective of an original equipment manufacturer (OEM). The objective of the OEM is to select products to manufacture and remanufacture among a set of given alternatives and simultaneously determine their prices so as to maximize its profit. It is assumed that the probability a customer selects a product is proportional to its utility and inversely proportional to its price. The utility of a product is an increasing function of its perceived quality. In our base model, products are discriminated by their unit production costs and utilities. We also analyze a case where remanufacturing is limited by the available quantity of collected remanufacturable products. We show that the resulting problem is decomposed into the pricing and product line selection subproblems. Pricing problem is solved by a variant of the simplex search procedure which can also handle constraints, while complete enumeration and a genetic algorithm are used for the solution of the product line selection problem. A number of experiments are carried out to identify conditions under which it is economically viable for the firm to sell remanufactured products. We also determine the optimal utility and unit production cost values of a remanufactured product, which maximizes the total profit of the OEM.

Asset management in theory and practice.

PubMed

Mace, J D

1998-01-01

Managing capital-intensive imaging environments continues to be a challenge for nearly all administrators. Asset management, the strategic management of equipment inventory, must include planning, assessment, procurement, utilization review, maintenance, repair and disposal of equipment to reduce costs and improve efficiency. It must involve some shared risk between the facility and the provider, whether an original equipment manufacturer (OEM) or independent service organization (ISO). An absence of risk in the arrangement implies the provider is offering service management or consulting. A case study reports on three hospitals in the OhioHealth system. Their immediate goal, as they began to investigate asset management: cut costs immediately. A cross-functional team from the three hospitals began its investigation of various options, including working with ISOs, OEMs and development of inhouse clinical engineering. After developing a process to evaluate vendors, the team was able to score each against their cost-reduction potential, quality and implementation skills. The team narrowed its selection quickly to two multivendor service providers. An initial contract guaranteed savings of 20 percent of the annual budget, with a projected two to five percent additional savings. OEM relationships were moved to a time-and-materials basis, and ISOs were used in selected areas. In addition, the internal inhouse clinical engineering services group was moved into a "first call" approach in some areas. That expanded role resulted in savings and improved response time. The process, although not without its problems, was viewed favorably overall.

The Linux operating system: An introduction

NASA Technical Reports Server (NTRS)

Bokhari, Shahid H.

1995-01-01

Linux is a Unix-like operating system for Intel 386/486/Pentium based IBM-PCs and compatibles. The kernel of this operating system was written from scratch by Linus Torvalds and, although copyrighted by the author, may be freely distributed. A world-wide group has collaborated in developing Linux on the Internet. Linux can run the powerful set of compilers and programming tools of the Free Software Foundation, and XFree86, a port of the X Window System from MIT. Most capabilities associated with high performance workstations, such as networking, shared file systems, electronic mail, TeX, LaTeX, etc. are freely available for Linux. It can thus transform cheap IBM-PC compatible machines into Unix workstations with considerable capabilities. The author explains how Linux may be obtained, installed and networked. He also describes some interesting applications for Linux that are freely available. The enormous consumer market for IBM-PC compatible machines continually drives down prices of CPU chips, memory, hard disks, CDROMs, etc. Linux can convert such machines into powerful workstations that can be used for teaching, research and software development. For professionals who use Unix based workstations at work, Linux permits virtually identical working environments on their personal home machines. For cost conscious educational institutions Linux can create world-class computing environments from cheap, easily maintained, PC clones. Finally, for university students, it provides an essentially cost-free path away from DOS into the world of Unix and X Windows.

40 CFR 98.304 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... monitoring requirements of this section. For purposes of this subpart, any reference in § 98.3(d)(1) through... Equipment Manufacturers (OEM) and SF6 returned to the facility from off-site recycling are also accounted...

40 CFR 98.304 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... monitoring requirements of this section. For purposes of this subpart, any reference in § 98.3(d)(1) through... Equipment Manufacturers (OEM) and SF6 returned to the facility from off-site recycling are also accounted...

40 CFR 98.304 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... monitoring requirements of this section. For purposes of this subpart, any reference in § 98.3(d)(1) through... Equipment Manufacturers (OEM) and SF6 returned to the facility from off-site recycling are also accounted...

40 CFR 98.304 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... monitoring requirements of this section. For purposes of this subpart, any reference in § 98.3(d)(1) through... Equipment Manufacturers (OEM) and SF6 returned to the facility from off-site recycling are also accounted...

Study on kinematic and compliance test of suspension

NASA Astrophysics Data System (ADS)

Jing, Lixin; Wu, Liguang; Li, Xuepeng; Zhang, Yu

2017-09-01

Chassis performance development is a major difficulty in vehicle research and development, which is the main factor restricting the independent development of vehicles in China. These years, through a large number of studies, chassis engineers have found that the suspension K&C characteristics as a quasi-static characteristic of the suspension provides a technical route for the suspension performance R&D, and the suspension K&C test has become an important means of vehicle benchmarking, optimization and verification. However, the research on suspension K&C test is less in china, and the test conditions and setting requirements vary greatly from OEM to OEM. In this paper, the influence of different settings on the characteristics of the suspension is obtained through experiments, and the causes of the differences are analyzed; in order to fully reflect the suspension characteristics, the author recommends the appropriate test case and settings.

Increasing EDV Range through Intelligent Cabin Air Handling Strategies: Annual Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leighton, Daniel; Rugh, John

Computational fluid dynamics (CFD) simulations of a Ford Focus Electric demonstrated that a split flow heating, ventilating and air conditioning (HVAC) system with rear recirculation ducts can reduce cabin heating loads by up to 57.4% relative to full fresh air usage under some conditions (steady state, four passengers, ambient temperature of -5 deg C). Simulations also showed that implementing a continuous recirculation fraction control system into the original equipment manufacturer (OEM) HVAC system can reduce cabin heating loads by up to 50.0% relative to full fresh air usage under some conditions (steady state, four passengers, ambient temperature of -5 degmore » C). Identified that continuous fractional recirculation control of the OEM system can provide significant energy savings for EVs at minimal additional cost, while a split flow HVAC system with rear recirculation ducts only provides minimal additional improvement at significant additional cost.« less

Pattern Recognition-Assisted Infrared Library Searching of the Paint Data Query Database to Enhance Lead Information from Automotive Paint Trace Evidence.

PubMed

Lavine, Barry K; White, Collin G; Allen, Matthew D; Weakley, Andrew

2017-03-01

Multilayered automotive paint fragments, which are one of the most complex materials encountered in the forensic science laboratory, provide crucial links in criminal investigations and prosecutions. To determine the origin of these paint fragments, forensic automotive paint examiners have turned to the paint data query (PDQ) database, which allows the forensic examiner to compare the layer sequence and color, texture, and composition of the sample to paint systems of the original equipment manufacturer (OEM). However, modern automotive paints have a thin color coat and this layer on a microscopic fragment is often too thin to obtain accurate chemical and topcoat color information. A search engine has been developed for the infrared (IR) spectral libraries of the PDQ database in an effort to improve discrimination capability and permit quantification of discrimination power for OEM automotive paint comparisons. The similarity of IR spectra of the corresponding layers of various records for original finishes in the PDQ database often results in poor discrimination using commercial library search algorithms. A pattern recognition approach employing pre-filters and a cross-correlation library search algorithm that performs both a forward and backward search has been used to significantly improve the discrimination of IR spectra in the PDQ database and thus improve the accuracy of the search. This improvement permits inter-comparison of OEM automotive paint layer systems using the IR spectra alone. Such information can serve to quantify the discrimination power of the original automotive paint encountered in casework and further efforts to succinctly communicate trace evidence to the courts.

The offspring of epileptic mother.

PubMed

Tamer, S K; Misra, S; Jaiswal, S

1996-01-01

The offspring of an epileptic mother is an issue-currently getting attention because of its several implications. A complex interaction between epilepsy during pregnancy and its adverse impact on foetus, labor, neonate, congenital malformation, psychosocial and medico-social concern and treatment challenges of such cases is increasingly being realised. Some of the significant observations has been reviewed extensively in this article. Maternal epilepsy is likely to adversely affect the off-spring at its various stages of development amounting to increased morbidity and mortality. Increased seizure frequency during pregnancy with resultant increased risk is well documented but its mechanism is poorly understood. Low apgar score, increased still birth rates (1.3 to 14%) in offspring of epileptic mother (OEM) is reported. So also, the neonatal and perinatal deaths are twice more common in OEMS than normal control. Small for dates, and prematurity in OEM is reported to be 7 to 10% and 4-11% respectively. Adverse impact on labor and delivery like preclampsia, abruptio placentae, polyhydramnios, assisted delivery, cesarean section and IUGR poses particular challenges to the obstetrician. Pediatrician's alertness is needed to anticipate and deal with the bleeding manifestation due to deficiency of Vit-K dependent clotting factors and various anticonvulsant drug (AED) withdrawal symptoms. Significant risk of developing congenital malformation is the result of epilepsy perse and the AED used during pregnancy. AED exposure leads to other distinct clinical syndromes, the orofacial clefts and cardiac anomalies being the commonest manifestation. Epilepsy in mother but not in father has significant adverse impact. Management strategies in the context of available observation has been discussed.

The effect of laser focus and process parameters on microstructure and mechanical properties of SLM Inconel 718

NASA Astrophysics Data System (ADS)

Bean, Glenn E.; Witkin, David B.; McLouth, Tait D.; Zaldivar, Rafael J.

2018-02-01

Research on the selective laser melting (SLM) method of laser powder bed fusion additive manufacturing (AM) has shown that surface and internal quality of AM parts is directly related to machine settings such as laser energy density, scanning strategies, and atmosphere. To optimize laser parameters for improved component quality, the energy density is typically controlled via laser power, scanning rate, and scanning strategy, but can also be controlled by changing the spot size via laser focal plane shift. Present work being conducted by The Aerospace Corporation was initiated after observing inconsistent build quality of parts printed using OEM-installed settings. Initial builds of Inconel 718 witness geometries using OEM laser parameters were evaluated for surface roughness, density, and porosity while varying energy density via laser focus shift. Based on these results, hardware and laser parameter adjustments were conducted in order to improve build quality and consistency. Tensile testing was also conducted to investigate the effect of build plate location and laser settings on SLM 718. This work has provided insight into the limitations of OEM parameters compared with optimized parameters towards the goal of manufacturing aerospace-grade parts, and has led to the development of a methodology for laser parameter tuning that can be applied to other alloy systems. Additionally, evidence was found that for 718, which derives its strength from post-manufacturing heat treatment, there is a possibility that tensile testing may not be perceptive to defects which would reduce component performance. Ongoing research is being conducted towards identifying appropriate testing and analysis methods for screening and quality assurance.

Better Demand Signal, Better Decisions? Evaluation of Big Data in a Licensed Remanufacturing Supply Chain with Environmental Risk Considerations.

PubMed

Niu, Baozhuang; Zou, Zongbao

2017-08-01

Big data ability helps obtain more accurate demand signal. However, is better demand signal always beneficial for the supply chain parties? To answer this question, we investigate a remanufacturing supply chain (RSC), where demand uncertainty is significant, and the value to reduce environmental risk is large. Specifically, we focus on a licensed RSC comprising an original equipment manufacturer (OEM) and a third-party remanufacturer (3PR). The latter pays a unit license fee to the former, and can be risk averse to the demand of remanufactured products. We show that the OEM and the risk-neutral 3PR always have incentives to improve their big data abilities to increase their profits. However, when the 3PR is risk averse, big data might hurt its profit: the value of big data is positive if its demand signal accuracy is sufficiently low. Interestingly, we find that while information sharing hurts the 3PR, it benefits the OEM as well as the supply chain. Thus, if costly information sharing is allowed, a win-win situation can be achieved. We also find that information sharing generates more valuation when the 3PR is risk averse than that when the 3PR is risk neutral. More importantly, we find that the 3PR's risk attitude and demand signal accuracy can significantly mitigate the negative environmental impact (measured by the amount of the waste): (1) the more risk neutral the 3PR is, the better the environment is; (2) the more accurate demand signal is, the better the environment is. © 2017 Society for Risk Analysis.

How to Make Financial Aid "Freshman-Friendly"

ERIC Educational Resources Information Center

Pugh, Susan L.; Johnson, David B.

2011-01-01

Ultimately, making financial aid "freshman friendly" also makes financial aid "sophomore friendly," "junior friendly," and "senior friendly." Indiana University has in place an Office of Enrollment Management (OEM) model that includes focused financial aid packaging strategies complemented by unique contact…

Tools and Strategies for Product Life Cycle Management ñ A Case Study in Foundry

NASA Astrophysics Data System (ADS)

Patil, Rajashekar; Kumar, S. Mohan; Abhilash, E.

2012-08-01

Advances in information and communication technology (ICT) have opened new possibilities of collaborations among the customers, suppliers, manufactures and partners to effectively tackle various business challenges. Product Life Cycle Management(PLM) has been a proven approach for Original Equipment Manufacturers (OEMs) to increase their productivity, improve their product quality, speed up delivery, and increase their profit and to become more efficient. However, their Tier 2 and Tier 3 suppliers like foundry industries are still in their infancy without adopting PLM. Hence to enhance their understanding, the basic concepts, the tools and strategies for PLM are presented is this paper. By selecting and implementing appropriate PLM strategies in a small foundry, an attempt was also made to understand the immediate benefits of using PLM tools (commercial PLM software and digital manufacturing tools). This study indicated a reduction in lead time and improved utilization of organizational resources in the production of automobile impeller. These observations may be further extrapolated to other multiproduct, multi-discipline and multi-customer companies to realize the advantages of using PLM technology

Data Center IT Equipment Energy Assessment Tools: Current State of Commercial Tools, Proposal for a Future Set of Assessment Tools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radhakrishnan, Ben D.

2012-06-30

This research project, which was conducted during the Summer and Fall of 2011, investigated some commercially available assessment tools with a focus on IT equipment to see if such tools could round out the DC Pro tool suite. In this research, the assessment capabilities of the various tools were compiled to help make “non-biased” information available to the public. This research should not be considered to be exhaustive on all existing vendor tools although a number of vendors were contacted. Large IT equipment OEM’s like IBM and Dell provide their proprietary internal automated software which does not work on anymore » other IT equipment. However, found two companies with products that showed promise in performing automated assessments for IT equipment from different OEM vendors. This report documents the research and provides a list of software products reviewed, contacts and websites, product details, discussions with specific companies, a set of recommendations, and next steps. As a result of this research, a simple 3-level approach to an IT assessment tool is proposed along with an example of an assessment using a simple IT equipment data collection tool (Level 1, spreadsheet). The tool has been reviewed with the Green Grid and LBNL staff. The initial feedback has been positive although further refinement to the tool will be necessary. Proposed next steps include a field trial of at least two vendors’ software in two different data centers with an objective to prove the concept, ascertain the extent of energy and computational assessment, ease of installation and opportunities for continuous improvement. Based on the discussions, field trials (or case studies) are proposed with two vendors – JouleX (expected to be completed in 2012) and Sentilla.« less

The 3D dynamics of the Cosserat rod as applied to continuum robotics

NASA Astrophysics Data System (ADS)

Jones, Charles Rees

2011-12-01

In the effort to simulate the biologically inspired continuum robot's dynamic capabilities, researchers have been faced with the daunting task of simulating---in real-time---the complete three dimensional dynamics of the "beam-like" structure which includes the three "stiff" degrees-of-freedom transverse and dilational shear. Therefore, researchers have traditionally limited the difficulty of the problem with simplifying assumptions. This study, however, puts forward a solution which makes no simplifying assumptions and trades off only the real-time requirement of the desired solution. The solution is a Finite Difference Time Domain method employing an explicit single step method with cheap right hands sides. The cheap right hand sides are the result of a rather ingenious formulation of the classical beam called the Cosserat rod by, first, the Cosserat brothers and, later, Stuart S. Antman which results in five nonlinear but uncoupled equations that require only multiplication and addition. The method is therefore suitable for hardware implementation thus moving the real-time requirement from a software solution to a hardware solution.

Simulation and Failure Analysis of Car Bumper Made of Pineapple Leaf Fiber Reinforced Composite

NASA Astrophysics Data System (ADS)

Arbintarso, E. S.; Muslim, M.; Rusianto, T.

2018-02-01

The bumper car made of the Pineapple Leaf Fiber Reinforced Composite (PLFRC) is possible to be produced with the advantage of easy to get, and cheap. Pineapple leaf fiber has chosen as a natural fiber, which the maximum of the strength of 368 MPa. The objective of this study was to determine the maximum capability of front car bumpers using Pineapple Leaf Fiber Reinforced Composite materials through the process of simulating stress analysis with Solidworks 2014 software. The aim also to know the distribution of loads that occur on the front car bumper and predict the critical point position on the design of the bumper. The result will use to develop the alternative lightweight, cheap and environmentally friendly materials in general and the development of the use of pineapple fiber for automotive purposes in particular. Simulations and failure analysis have been conducted and showed an increased impact speed in line with increased displacement, strain, and stress that occur on the surface of the bumper. The bumper can withstand collisions at a speed of less than 70 kph.

Evaluation of Low-Cost, Centimeter-Level Accuracy OEM GNSS Receivers

DOT National Transportation Integrated Search

2018-02-02

This report discusses the results of a study to quantify the performance of low-cost, centimeter-level accurate Global Navigation Satellite Systems (GNSS) receivers that have appeared on the market in the last few years. Centimeter-level accuracy is ...

49 CFR 599.200 - Registration of participating dealers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... franchise agreement to sell new automobiles with an original equipment manufacturer of automobiles; (4) A...) Dealer's Federal Tax Identification Number (TIN) and OEM assigned dealer franchise number; (ii) Legal.... (e) Revocation of Dealer Registration. (1) Termination or Discontinuance of Franchise. (i) A dealer...

49 CFR 599.200 - Registration of participating dealers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... franchise agreement to sell new automobiles with an original equipment manufacturer of automobiles; (4) A...) Dealer's Federal Tax Identification Number (TIN) and OEM assigned dealer franchise number; (ii) Legal.... (e) Revocation of Dealer Registration. (1) Termination or Discontinuance of Franchise. (i) A dealer...

49 CFR 599.200 - Registration of participating dealers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... franchise agreement to sell new automobiles with an original equipment manufacturer of automobiles; (4) A...) Dealer's Federal Tax Identification Number (TIN) and OEM assigned dealer franchise number; (ii) Legal.... (e) Revocation of Dealer Registration. (1) Termination or Discontinuance of Franchise. (i) A dealer...

49 CFR 599.200 - Registration of participating dealers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... franchise agreement to sell new automobiles with an original equipment manufacturer of automobiles; (4) A...) Dealer's Federal Tax Identification Number (TIN) and OEM assigned dealer franchise number; (ii) Legal.... (e) Revocation of Dealer Registration. (1) Termination or Discontinuance of Franchise. (i) A dealer...

49 CFR 599.200 - Registration of participating dealers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... franchise agreement to sell new automobiles with an original equipment manufacturer of automobiles; (4) A...) Dealer's Federal Tax Identification Number (TIN) and OEM assigned dealer franchise number; (ii) Legal.... (e) Revocation of Dealer Registration. (1) Termination or Discontinuance of Franchise. (i) A dealer...

Wellness engineering for better quality of life of aging baby boomer

NASA Astrophysics Data System (ADS)

Szu, Harold

2007-04-01

Current health care system serving 78M aging baby-boomers is no longer sustainable, as the cost about 1/5 GDP will reach 1/4 GDT when all is retired in decades, unless the system is changed. We design a high-tech safe net to enhance the timeliness of early correct treatment execution (otherwise, causing 1/4 mortality associated with an escalating legal fee waste). We follow the common sense that "a stitch in time saves nine," and adopt the military surveillance know-how in designing early warning health management system, comprising of smart sensor pairs for point-care surveillance. However, the grand plan of affordable smart sensors hardware for households requires an ODM & OEM teaming to conduct parallel designing and sequential marketing strategy. The military software strategy combating a treacherous adversary enemy match well with point cares surveillance overcoming real world microorganism variability. Moreover, such smart military software provides self-reference change detection, not by traditional cohort ensemble average, but by individual own higher order statistics (HOS) independent component analysis (ICA), which take the advantage of known initial condition for each individual and desirable over-sampling daily dynamics. The triggering of warning follows the military algorithms comprising of Receiver Operation Characteristics (ROC) and Automatic Target Recognition (ATR). To further reduce the unwanted false negative rate, a benchmarked is made against the traditional cohort-ensemble baseline average & the upper & lower bounds of variance as adopted by the gatekeepers - Medical Doctors (MD) and Nurses.

The need for a single cleaning standard for OEM and OSP fiber optic connections

NASA Astrophysics Data System (ADS)

Forrest, Edward J., Jr.; Blair, Paul

2009-01-01

Development of fiber optic communications networks has continued in virtually all geographies of the world. Some calculate that expansion in the USA alone will continue to 2025. After that time there will maintenance, upgrade, and replacement. While some nations are more advanced than others and some enterprises more sophisticated than others, the undeniable reality is that previous networks will, in some fashion or another, include fiber optics. The future need is for speed and reliable bandwidth: lots of it. Decisions will be made based on new concepts that will enable far more data at far faster rates than once considered feasible or necessary. As the consumer enters the market with newly engineered home entertainment systems, additional burdens will be placed on both OEM and OSP. These are not negative challenges, but rather indicators of a new generation of consumers with awareness and demand far more advanced any may have imagined just a few years ago.

TARDEC Collaboration - Energy Storage

DTIC Science & Technology

2010-12-07

Lithium - Ion Battery Pack Manufacturing • Advanced battery material scale-up facility • Electromagnetic Armor Power Maturation • Nickel-Zinc 6T...specification focused on 95% accuracy for SoC and SoH. • Lithium - Ion Battery Management Systems – Li-ion Battery OEMs produce BMS for their own battery

The First Year of Croatian Meteor Network

NASA Astrophysics Data System (ADS)

Andreic, Zeljko; Segon, Damir

2010-08-01

The idea and a short history of Croatian Meteor Network (CMN) is described. Based on use of cheap surveillance cameras, standard PC-TV cards and old PCs, the Network allows schools, amateur societies and individuals to participate in photographic meteor patrol program. The network has a strong educational component and many cameras are located at or around teaching facilities. Data obtained by these cameras are collected and processed by the scientific team of the network. Currently 14 cameras are operable, covering a large part of the croatian sky, data gathering is fully functional, and data reduction software is in testing phase.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bocci, Valerio; Chiodi, Giacomo; Iacoangeli, Francesco

The necessity to use Photo Multipliers (PM) as light detector limited in the past the use of crystals in radiation handled device preferring the Geiger approach. The Silicon Photomultipliers (SiPMs) are very small and cheap, solid photon detectors with good dynamic range and single photon detection capability, they are usable to supersede cumbersome and difficult to use Photo Multipliers (PM). A SiPM can be coupled with a scintillator crystal to build efficient, small and solid radiation detector. A cost effective and easily replicable Hardware software module for SiPM detector readout is made using the ArduSiPM solution. The ArduSiPM is anmore » easily battery operable handled device using an Arduino DUE (an open Software/Hardware board) as processor board and a piggy-back custom designed board (ArduSiPM Shield), the Shield contains all the blocks features to monitor, set and acquire the SiPM using internet network. (authors)« less

Reviews Toy: Air swimmers Book: Their Arrows will Darken the Sun: The Evolution and Science of Ballistics Book: Physics Experiments for your Bag Book: Quantum Physics for Poets Equipment: SEP colour wheel kit Equipment: SEP colour mixing kit Software: USB DrDAQ App: iHandy Level Equipment: Photonics Explorer kit Web Watch

NASA Astrophysics Data System (ADS)

2012-01-01

WE RECOMMEND Air swimmers Helium balloon swims like a fish Their Arrows will Darken the Sun: The Evolution and Science of Ballistics Ballistics book hits the spot Physics Experiments for your Bag Handy experiments for your lessons Quantum Physics for Poets Book shows the economic importance of physics SEP colour wheel kit Wheels investigate colour theory SEP colour mixing kit Cheap colour mixing kit uses red, green and blue LEDs iHandy Level iPhone app superbly measures angles Photonics Explorer kit Free optics kit given to schools WORTH A LOOK DrDAQ DrDAQ software gets an upgrade WEB WATCH Websites show range of physics

3D Printing of CT Dataset: Validation of an Open Source and Consumer-Available Workflow.

PubMed

Bortolotto, Chandra; Eshja, Esmeralda; Peroni, Caterina; Orlandi, Matteo A; Bizzotto, Nicola; Poggi, Paolo

2016-02-01

The broad availability of cheap three-dimensional (3D) printing equipment has raised the need for a thorough analysis on its effects on clinical accuracy. Our aim is to determine whether the accuracy of 3D printing process is affected by the use of a low-budget workflow based on open source software and consumer's commercially available 3D printers. A group of test objects was scanned with a 64-slice computed tomography (CT) in order to build their 3D copies. CT datasets were elaborated using a software chain based on three free and open source software. Objects were printed out with a commercially available 3D printer. Both the 3D copies and the test objects were measured using a digital professional caliper. Overall, the objects' mean absolute difference between test objects and 3D copies is 0.23 mm and the mean relative difference amounts to 0.55 %. Our results demonstrate that the accuracy of 3D printing process remains high despite the use of a low-budget workflow.

A new computerized moving stage for optical microscopes

NASA Astrophysics Data System (ADS)

Hatiboglu, Can Ulas; Akin, Serhat

2004-06-01

Measurements of microscope stage movements in the x and y directions are of importance for some stereological methods. Traditionally, the length of stage movements is measured with differing precision and accuracy using a suitable motorized stage, a microscope and software. Such equipment is generally expensive and not readily available in many laboratories. One other challenging problem is the adaptability to available microscope systems which weakens the possibility of the equipment to be used with any kind of light microscope. This paper describes a simple and cheap programmable moving stage that can be used with the available microscopes in the market. The movements of the stage are controlled by two servo-motors and a controller chip via a Java-based image processing software. With the developed motorized stage and a microscope equipped with a CCD camera, the software allows complete coverage of the specimens with minimum overlap, eliminating the optical strain associated with counting hundreds of images through an eyepiece, in a quick and precise fashion. The uses and the accuracy of the developed stage are demonstrated using thin sections obtained from a limestone core plug.

40 CFR 85.1502 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Procedure at part 86. (7) Independent commercial importer (ICI). An importer who is not an original... by an OEM or ICI in the course of motor vehicle or motor vehicle engine production. (14) United... time of resale (for a motor vehicle or motor vehicle engine owned by the ICI at the time of importation...

40 CFR 85.1502 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Procedure at part 86. (7) Independent commercial importer (ICI). An importer who is not an original... by an OEM or ICI in the course of motor vehicle or motor vehicle engine production. (14) United... time of resale (for a motor vehicle or motor vehicle engine owned by the ICI at the time of importation...

40 CFR 85.1502 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Procedure at part 86. (7) Independent commercial importer (ICI). An importer who is not an original... by an OEM or ICI in the course of motor vehicle or motor vehicle engine production. (14) United... time of resale (for a motor vehicle or motor vehicle engine owned by the ICI at the time of importation...

40 CFR 85.1502 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Procedure at part 86. (7) Independent commercial importer (ICI). An importer who is not an original... by an OEM or ICI in the course of motor vehicle or motor vehicle engine production. (14) United... time of resale (for a motor vehicle or motor vehicle engine owned by the ICI at the time of importation...

Investigation of an Error Theory for Conjoint Measurement Methodology.

DTIC Science & Technology

1983-05-01

1ybren, 1982; Srinivasan and Shocker, 1973a, 1973b; Ullrich =d Cumins , 1973; Takane, Young, and de Leeui, 190C; Yount,, 1972’. & OEM...procedures as a diagnostic tool. Specifically, they used the oompted STRESS - value and a measure of fit they called PRECAP that could be obtained

A Comparative Study of Online Item Calibration Methods in Multidimensional Computerized Adaptive Testing

ERIC Educational Resources Information Center

Chen, Ping

2017-01-01

Calibration of new items online has been an important topic in item replenishment for multidimensional computerized adaptive testing (MCAT). Several online calibration methods have been proposed for MCAT, such as multidimensional "one expectation-maximization (EM) cycle" (M-OEM) and multidimensional "multiple EM cycles"…

40 CFR 85.530 - Vehicle/engine labels and packaging labels.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM MOBILE SOURCES Exemption of Clean Alternative Fuel... from the tampering prohibition: (1) You must make a supplemental emission control information label for..., consistent with the requirements of this subpart. You may do this by identifying the OEM test group/engine...

40 CFR 85.530 - Vehicle/engine labels and packaging labels.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM MOBILE SOURCES Exemption of Clean Alternative Fuel... from the tampering prohibition: (1) You must make a supplemental emission control information label for..., consistent with the requirements of this subpart. You may do this by identifying the OEM test group/engine...

Build upon the Strength's of America's Community Colleges

ERIC Educational Resources Information Center

Jacobs, James

2010-01-01

In February 2009, Macomb Community College held an unusual student "graduation" in a suburban office building. There were 25 "graduates"--all males, many of whom had 10 to 15 years of experience as auto body designers working for original equipment manufacturers (OEM's) and their suppliers in the Detroit metropolitan area. They…

OEM unveil new ideas for shovels and excavators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fiscor, S.

2006-08-15

From upgrades to new loading arrangements, vendors are looking at new ways to optimize the production process. The paper describes P & M equipment's new C series electric shovels equipped with the centurion system, Hitachi's super-sized excavator to Canadian oil sands, and Bucyrus and Siemens' engineer shovels. 3 figs., 1 photo.

40 CFR 1033.645 - Non-OEM component certification program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... needs of your component. (iv) An engineering analysis (including test data in some cases) demonstrating to us that your component will not cause emissions to increase. The analysis must address both low-hour and end-of-useful life emissions. The amount of information required for this analysis is less...

40 CFR 1033.645 - Non-OEM component certification program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... needs of your component. (iv) An engineering analysis (including test data in some cases) demonstrating to us that your component will not cause emissions to increase. The analysis must address both low-hour and end-of-useful life emissions. The amount of information required for this analysis is less...

40 CFR 63.4481 - Am I subject to this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... recreational vehicles (including camping trailers and fifth wheels). This subcategory also includes the... attachment to an on-road vehicle on an original equipment manufacturer's (OEM) assembly line. The assembled... and products performed on-site at installations owned or operated by the Armed Forces of the United...

40 CFR 63.4481 - Am I subject to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... recreational vehicles (including camping trailers and fifth wheels). This subcategory also includes the... attachment to an on-road vehicle on an original equipment manufacturer's (OEM) assembly line. The assembled... and products performed on-site at installations owned or operated by the Armed Forces of the United...

40 CFR 63.4481 - Am I subject to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... recreational vehicles (including camping trailers and fifth wheels). This subcategory also includes the... attachment to an on-road vehicle on an original equipment manufacturer's (OEM) assembly line. The assembled... and products performed on-site at installations owned or operated by the Armed Forces of the United...

40 CFR 63.4481 - Am I subject to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... recreational vehicles (including camping trailers and fifth wheels). This subcategory also includes the... attachment to an on-road vehicle on an original equipment manufacturer's (OEM) assembly line. The assembled... and products performed on-site at installations owned or operated by the Armed Forces of the United...

40 CFR 63.4481 - Am I subject to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... recreational vehicles (including camping trailers and fifth wheels). This subcategory also includes the... attachment to an on-road vehicle on an original equipment manufacturer's (OEM) assembly line. The assembled... and products performed on-site at installations owned or operated by the Armed Forces of the United...

Designing Effective Persuasive Systems Utilizing the Power of Entanglement: Communication Channel, Strategy & Affect

ERIC Educational Resources Information Center

Li, Haiqing

2010-01-01

With rapid advancements in information and communication technologies, computer-mediated communication channels such as email, web, mobile smart-phones with SMS, social networking websites (Facebook), multimedia websites, and OEM devices provide users with multiple technology choices to seek information. However, no study has compared the…

The Homeland Security Ecosystem: An Analysis of Hierarchical and Ecosystem Models and Their Influence on Decision Makers

DTIC Science & Technology

2012-12-01

flows, diversity, emergence, networks, fusion, strategic planning, information sharing, ecosystem, hierarchy, NJ Regional Operations Intelligence ...Related Information...........................................................................79 viii 3. Production of Disaster Intelligence for... Intelligence for Field Personnel .................80 5. Focused Collection Efforts to Support FEMA and NJ OEM Operations

CheapStat: an open-source, "do-it-yourself" potentiostat for analytical and educational applications.

PubMed

Rowe, Aaron A; Bonham, Andrew J; White, Ryan J; Zimmer, Michael P; Yadgar, Ramsin J; Hobza, Tony M; Honea, Jim W; Ben-Yaacov, Ilan; Plaxco, Kevin W

2011-01-01

Although potentiostats are the foundation of modern electrochemical research, they have seen relatively little application in resource poor settings, such as undergraduate laboratory courses and the developing world. One reason for the low penetration of potentiostats is their cost, as even the least expensive commercially available laboratory potentiostats sell for more than one thousand dollars. An inexpensive electrochemical workstation could thus prove useful in educational labs, and increase access to electrochemistry-based analytical techniques for food, drug and environmental monitoring. With these motivations in mind, we describe here the CheapStat, an inexpensive (<$80), open-source (software and hardware), hand-held potentiostat that can be constructed by anyone who is proficient at assembling circuits. This device supports a number of potential waveforms necessary to perform cyclic, square wave, linear sweep and anodic stripping voltammetry. As we demonstrate, it is suitable for a wide range of applications ranging from food- and drug-quality testing to environmental monitoring, rapid DNA detection, and educational exercises. The device's schematics, parts lists, circuit board layout files, sample experiments, and detailed assembly instructions are available in the supporting information and are released under an open hardware license.

CheapStat: An Open-Source, “Do-It-Yourself” Potentiostat for Analytical and Educational Applications

PubMed Central

Rowe, Aaron A.; Bonham, Andrew J.; White, Ryan J.; Zimmer, Michael P.; Yadgar, Ramsin J.; Hobza, Tony M.; Honea, Jim W.; Ben-Yaacov, Ilan; Plaxco, Kevin W.

2011-01-01

Although potentiostats are the foundation of modern electrochemical research, they have seen relatively little application in resource poor settings, such as undergraduate laboratory courses and the developing world. One reason for the low penetration of potentiostats is their cost, as even the least expensive commercially available laboratory potentiostats sell for more than one thousand dollars. An inexpensive electrochemical workstation could thus prove useful in educational labs, and increase access to electrochemistry-based analytical techniques for food, drug and environmental monitoring. With these motivations in mind, we describe here the CheapStat, an inexpensive (<$80), open-source (software and hardware), hand-held potentiostat that can be constructed by anyone who is proficient at assembling circuits. This device supports a number of potential waveforms necessary to perform cyclic, square wave, linear sweep and anodic stripping voltammetry. As we demonstrate, it is suitable for a wide range of applications ranging from food- and drug-quality testing to environmental monitoring, rapid DNA detection, and educational exercises. The device's schematics, parts lists, circuit board layout files, sample experiments, and detailed assembly instructions are available in the supporting information and are released under an open hardware license. PMID:21931613

Application of terrestrial 'structure-from-motion' photogrammetry on a medium-size Arctic valley glacier: potential, accuracy and limitations

NASA Astrophysics Data System (ADS)

Hynek, Bernhard; Binder, Daniel; Boffi, Geo; Schöner, Wolfgang; Verhoeven, Geert

2014-05-01

Terrestrial photogrammetry was the standard method for mapping high mountain terrain in the early days of mountain cartography, until it was replaced by aerial photogrammetry and airborne laser scanning. Modern low-price digital single-lens reflex (DSLR) cameras and highly automatic and cheap digital computer vision software with automatic image matching and multiview-stereo routines suggest the rebirth of terrestrial photogrammetry, especially in remote regions, where airborne surveying methods are expensive due to high flight costs. Terrestrial photogrammetry and modern automated image matching is widely used in geodesy, however, its application in glaciology is still rare, especially for surveying ice bodies at the scale of some km², which is typical for valley glaciers. In August 2013 a terrestrial photogrammetric survey was carried out on Freya Glacier, a 6km² valley glacier next to Zackenberg Research Station in NE-Greenland, where a detailed glacier mass balance monitoring was initiated during the last IPY. Photos with a consumer grade digital camera (Nikon D7100) were taken from the ridges surrounding the glacier. To create a digital elevation model, the photos were processed with the software photoscan. A set of ~100 dGPS surveyed ground control points on the glacier surface was used to georeference and validate the final DEM. Aim of this study was to produce a high resolution and high accuracy DEM of the actual surface topography of the Freya glacier catchment with a novel approach and to explore the potential of modern low-cost terrestrial photogrammetry combined with state-of-the-art automated image matching and multiview-stereo routines for glacier monitoring and to communicate this powerful and cheap method within the environmental research and glacier monitoring community.

Bridging scales from satellite to grains: Structural mapping aided by tablet and photogrammetry

NASA Astrophysics Data System (ADS)

Hawemann, Friedrich; Mancktelow, Neil; Pennacchioni, Giorgio; Wex, Sebastian; Camacho, Alfredo

2016-04-01

Bridging scales from satellite to grains: Structural mapping aided by tablet and photogrammetry A fundamental problem in small-scale mapping is linking outcrop observations to the large scale deformation pattern. The evolution of handheld devices such as tablets with integrated GPS and the availability of airborne imagery allows a precise localization of outcrops. Detailed structural geometries can be analyzed through ortho-rectified photo mosaics generated by photogrammetry software. In this study, we use a cheap standard Samsung-tablet (< 300 Euro) to map individual, up to 60 m long shear zones with the tracking option offered by the program Locus Map. Even though GPS accuracy is about 3 m, the relative error from one point to another during tracking is on the order of only about 1 dm. Parts of the shear zone with excellent outcrop are photographed with a standard camera with a relatively wide angle in a mosaic array. An area of about 30 sqm needs about 50 photographs with enough overlap to be used for photogrammetry. The software PhotoScan from Agisoft matches the photographs in a fully automated manner, calculates a 3D model of the outcrop, and has the option to project this as an orthophoto onto a flat surface. This allows original orientations of grain-scale structures to be recorded over areas on a scale up to tens to hundreds of metres. The photo mosaics can then be georeferenced with the aid of the GPS-tracks of the shear zones and included in a GIS. This provides a cheap recording of the structures in high detail. The great advantages over mapping with UAVs (drones) is the resolution (<1mm to >1cm), the independence from weather and energy source, and the low cost.

Issues in implementing services for a wireless web-enabled digital camera

NASA Astrophysics Data System (ADS)

Venkataraman, Shyam; Sampat, Nitin; Fisher, Yoram; Canosa, John; Noel, Nicholas

2001-05-01

The competition in the exploding digital photography market has caused vendors to explore new ways to increase their return on investment. A common view among industry analysts is that increasingly it will be services provided by these cameras, and not the cameras themselves, that will provide the revenue stream. These services will be coupled to e- Appliance based Communities. In addition, the rapidly increasing need to upload images to the Internet for photo- finishing services as well as the need to download software upgrades to the camera is driving many camera OEMs to evaluate the benefits of using the wireless web to extend their enterprise systems. Currently, creating a viable e- appliance such as a digital camera coupled with a wireless web service requires more than just a competency in product development. This paper will evaluate the system implications in the deployment of recurring revenue services and enterprise connectivity of a wireless, web-enabled digital camera. These include, among other things, an architectural design approach for services such as device management, synchronization, billing, connectivity, security, etc. Such an evaluation will assist, we hope, anyone designing or connecting a digital camera to the enterprise systems.

User's Guide To CHEAP0 II-Economic Analysis of Stand Prognosis Model Outputs

Treesearch

Joseph E. Horn; E. Lee Medema; Ervin G. Schuster

1986-01-01

CHEAP0 II provides supplemental economic analysis capability for users of version 5.1 of the Stand Prognosis Model, including recent regeneration and insect outbreak extensions. Although patterned after the old CHEAP0 model, CHEAP0 II has more features and analytic capabilities, especially for analysis of existing and uneven-aged stands....

Adaptive user displays for intelligent tutoring software.

PubMed

Beal, Carole R

2004-12-01

Intelligent tutoring software (ITS) holds great promise for K-12 instruction. Yet it is difficult to obtain rich information about users that can be used in realistic educational delivery settings--public school classrooms--in which eye tracking and other user sensing technologies are not suitable. We are pursuing three "cheap and cheerful" strategies to meet this challenge in the context of an ITS for high school math instruction. First, we use detailed representations of student cognitive skills, including tasks to assess individual users' proficiency with abstract reasoning, proficiency with simple math facts and computational skill, and spatial ability. Second, we are using data mining and machine learning algorithms to identify instructional sequences that have been effective with previous students, and to use these patterns to make decisions about current students. Third, we are integrating a simple focus-of-attention tracking system into the software, using inexpensive, web cameras. This coarse-grained information can be used to time the display of multimedia hints, explanations, and examples when the user is actually looking at the screen, and to diagnose causes of problem-solving errors. The ultimate goal is to create non-intrusive software that can adapt the display of instructional information in real time to the user's cognitive strengths, motivation, and attention.

Review of Fuel Cell Technologies for Military Land Vehicles

DTIC Science & Technology

2014-09-01

fuel cell technologies for APUs are Proton Exchange Membrane Fuel Cells ( PEMFC ), direct methanol fuel cells and Solid Oxide Fuel Cells (SOFC). The...6 4.2 Proton Exchange Membrane Fuel Cells ( PEMFC ...OEM Original Equipment Manufacturer PEM Proton Exchange Membrane PEMFC Proton Exchange Membrane Fuel Cell SOFC Solid Oxide Fuel Cell TRL Technical

Ground Vehicle Power and Mobility Overview - Germany Visit

DTIC Science & Technology

2011-11-10

the current and future force Survivability Robotics – Intelligent Systems Vehicle Electronics & Architecture Fuel, Water, Bridging ...Test Cell • Engine Generator Test Lab • Full Vehicle Environmental Test Cell • Hybrid Electric Reconfigurable Moveable Integration Testbed (HERMIT...Converter Conducted competitive runoff evaluations on Bridging Boat engine candidates Completed independent durability assessment of OEM

75 FR 76337 - 2017 and Later Model Year Light-Duty Vehicle GHG Emissions and CAFE Standards: Supplemental...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-08

... all technologies. Nearly every OEM stressed that the agencies' costs estimates for lithium-ion batteries for HEVs/ PHEVs/EVs and mass reduction in particular were significantly too low compared to their... vehicles, hybrid-electric vehicles, plug-in hybrid electric vehicles, and battery-electric vehicles, during...

Collaboration management framework for OEM - suppliers relationships: a trust-based conceptual approach

NASA Astrophysics Data System (ADS)

Belkadi, Farouk; Messaadia, Mourad; Bernard, Alain; Baudry, David

2017-08-01

Due to the increased competitiveness and the diversity of requirements in today's markets, manufacturing companies need to join their competencies and resources to propose innovative solutions for each specific market, with the possibility to transpose these solutions to another market, by means of slight adaptations. Thus, manufacturing firms must constantly conduct new collaborations with known partners in most cases, but also with new partners. The critical question for managers in this latter case is how to define the best collaborative strategy according to the goals of the project and the specificity of the target market. This paper tackles the problem by proposing a conceptual framework for supporting the management of collaborative situations in the case of Original equipment manufacturers (OEMs). Based on the concept of trust level, the framework proposes a classification of different collaboration modes to be adopted in various contexts of inter-enterprise relationships, in manufacturing sector. The aim is to support the flexible navigation between different collaborative situations by taking into account all decision-making levels from the strategy to the implementation of the information technologies (IT) systems at the operational level.

Teaching about photosynthesis with simple equipment: analysis of light-induced changes in fluorescence and reflectance of plant leaves.

PubMed

Björn, Lars Olof; Li, Shaoshan

2013-10-01

Solar energy absorbed by plants results in either reflection or absorption. The latter results in photosynthesis, fluorescence, or heat. Measurements of fluorescence changes have been used for monitoring processes associated with photosynthesis. A simple method to follow changes in leaf fluorescence and leaf reflectance associated with nonphotochemical quenching and light acclimation of leaves is described. The main equipment needed consists of a green-light emitting laser pointer, a digital camera, and a personal computer equipped with the camera acquisition software and the programs ImageJ and Excel. Otherwise, only commonly available cheap materials are required.

Occupational exposure monitoring data collection, storage, and use among state-based and private workers' compensation insurers.

PubMed

Shockey, Taylor M; Babik, Kelsey R; Wurzelbacher, Steven J; Moore, Libby L; Bisesi, Michael S

2018-06-01

Despite substantial financial and personnel resources being devoted to occupational exposure monitoring (OEM) by employers, workers' compensation insurers, and other organizations, the United States (U.S.) lacks comprehensive occupational exposure databases to use for research and surveillance activities. OEM data are necessary for determining the levels of workers' exposures; compliance with regulations; developing control measures; establishing worker exposure profiles; and improving preventive and responsive exposure surveillance and policy efforts. Workers' compensation insurers as a group may have particular potential for understanding exposures in various industries, especially among small employers. This is the first study to determine how selected state-based and private workers' compensation insurers collect, store, and use OEM data related specifically to air and noise sampling.  Of 50 insurers contacted to participate in this study, 28 completed an online survey. All of the responding private and the majority of state-based insurers offered industrial hygiene (IH) services to policyholders and employed 1 to 3 certified industrial hygienists on average. Many, but not all, insurers used standardized forms for data collection, but the data were not commonly stored in centralized databases. Data were most often used to provide recommendations for improvement to policyholders. Although not representative of all insurers, the survey was completed by insurers that cover a substantial number of employers and workers. The 20 participating state-based insurers on average provided 48% of the workers' compensation insurance benefits in their respective states or provinces. These results provide insight into potential next steps for improving the access to and usability of existing data as well as ways researchers can help organizations improve data collection strategies. This effort represents an opportunity for collaboration among insurers, researchers, and others that can help insurers and employers while advancing the exposure assessment field in the U.S.

Pacer Comet 4: Automated Jet Engine Testing of a TF33-P100 Pratt & Whitney Engine

NASA Astrophysics Data System (ADS)

Mason, Rex Bolding

Pacer Comet 4 found its life out of necessity to replace an obsolescent Pacer Comet 3 engine test system at Tinker AFB in Oklahoma City, OK. Pacer Comet 3 (PC3) was created and installed in the early 1980's to test jet engines from a wide range of planes. PC3 had several problems from a maintenance standpoint: contractors designed and installed the system but the contract did not include the OEM data package. Without drawings or design knowledge, fixing the smallest of problems could turn into a multi-day project. In addition to high cost, as the OEM companies of proprietary parts went out of business, it became impossible to find a replacement for a failed part. These issues set the framework for the Pacer Comet 4 (PC4) system. PC4 was created as an organic AF and Department of Defense collaboration to fix the issues with PC3. PC4 provides the customer with a complete data package including multiple drawing sets and data sheets for all parts used, as well as design files for all PCBs created in house. PC4 has a standard to use commercially available off the shelf parts (COTS). The reason for this is sustainability in maintenance. If a part is to fail, it should be able to be purchased from any manufacturer that meets the specs of the original product. No proprietary parts are used, except as directed by the engine's OEM. This thesis will focus on the design and installation of the on-frame data acquisition PC4 system for the Pratt & Whitney TF33-P100A-QEC engine that is currently in use on the E3 Sentry. This thesis will show efficiency improvements for maintenance sustainability (70% cabling reduction) as well as discuss performance improvements in both test and production environments.

Development of Production-Intent Plug-In Hybrid Vehicle Using Advanced Lithium-Ion Battery Packs with Deployment to a Demonstration Fleet

DOE Office of Scientific and Technical Information (OSTI.GOV)

No, author

2013-09-29

The primary goal of this project was to speed the development of one of the first commercially available, OEM-produced plug-in hybrid electric vehicles (PHEV). The performance of the PHEV was expected to double the fuel economy of the conventional hybrid version. This vehicle program incorporated a number of advanced technologies, including advanced lithium-ion battery packs and an E85-capable flex-fuel engine. The project developed, fully integrated, and validated plug-in specific systems and controls by using GM’s Global Vehicle Development Process (GVDP) for production vehicles. Engineering Development related activities included the build of mule vehicles and integration vehicles for Phases I &more » II of the project. Performance data for these vehicles was shared with the U.S. Department of Energy (DOE). The deployment of many of these vehicles was restricted to internal use at GM sites or restricted to assigned GM drivers. Phase III of the project captured the first half or Alpha phase of the Engineering tasks for the development of a new thermal management design for a second generation battery module. The project spanned five years. It included six on-site technical reviews with representatives from the DOE. One unique aspect of the GM/DOE collaborative project was the involvement of the DOE throughout the OEM vehicle development process. The DOE gained an understanding of how an OEM develops vehicle efficiency and FE performance, while balancing many other vehicle performance attributes to provide customers well balanced and fuel efficient vehicles that are exciting to drive. Many vehicle content and performance trade-offs were encountered throughout the vehicle development process to achieve product cost and performance targets for both the OEM and end customer. The project team completed two sets of PHEV development vehicles with fully integrated PHEV systems. Over 50 development vehicles were built and operated for over 180,000 development miles. The team also completed four GM engineering development Buy-Off rides/milestones. The project included numerous engineering vehicle and systems development trips including extreme hot, cold and altitude exposure. The final fuel economy performance demonstrated met the objectives of the PHEV collaborative GM/DOE project. Charge depletion fuel economy of twice that of the non-PHEV model was demonstrated. The project team also designed, developed and tested a high voltage battery module concept that appears to be feasible from a manufacturability, cost and performance standpoint. The project provided important product development and knowledge as well as technological learnings and advancements that include multiple U.S. patent applications.« less

GHPsRUS Project

DOE Data Explorer

Battocletti, Liz

2013-07-09

The GHPsRUS Project's full name is "Measuring the Costs and Benefits of Nationwide Geothermal Heat Pump Deployment." The dataset contains employment and installation price data collected by four economic surveys: (1)GHPsRUS Project Manufacturer & OEM Survey, (2) GHPsRUS Project Geothermal Loop Survey, (3) GHPsRUS Project Mechanical Equipment Installation Survey, and (4) GHPsRUS Geothermal Heat Pump Industry Survey

75 FR 51845 - Chrysler Group, LLC Manufacturing Division St. Louis North Plant Including On-Site Leased Workers...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-23

..., C R Associates, Syncreon, Robinson Solutions and Dupont Performance Coatings Fenton, MO; Amended... produce performance coating solutions for vehicles. The company reports that workers leased from DuPont Performance Coatings, a wholly-owned subsidiary of E.I. DuPont de Nemours Company, OEM, were employed on-site...

Alternative Fuels Data Center: Diesel Vehicle Availability

Science.gov Websites

use biodiesel; however, be sure to check your original equipment manufacturer (OEM) engine warranty to ensure that higher-level blends of this alternative fuel are approved for use. B5 is approved for use in Vehicles Use the Alternative Fuel and Advanced Vehicle Search to browse the available models approved by

78 FR 34935 - Revisions to Operational Requirements for the Use of Enhanced Flight Vision Systems (EFVS) and to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-11

... Transportation Safety Board OEM Original equipment manufacturer OpSpec Operation specification PAR Precision....1) B. Consolidate EFVS requirements in part 91 in a new section (Sec. 91.176) C. Establish equipment... single new section for organizational and regulatory clarity. Section 91.189 would be amended to permit...

A closer look at ‘Cheap White’ cigarettes

PubMed Central

Ross, Hana; Vellios, Nicole; Clegg Smith, Katherine; Ferguson, Jacqueline; Cohen, Joanna E

2016-01-01

Background Given the prominence of Cheap Whites in illicit tobacco discussions, we examined various definitions, market presence, brand proliferation, manufacturers, production locations, trademark ownership, prices and compliance with tax stamp and warning labels. Methods Data from peer-reviewed and grey literature, newspapers, trademark registries, governments/international organisation reports, and the tobacco industry were contrasted with two visual legal requirements (tax stamps and warning labels) and prices from the Tobacco Pack Surveillance System (TPackSS). Results Multiple sources identified 82 Cheap White brands and 53 manufacturers operating at least 82 production facilities. One-third of these manufacturers are in the free zones of Russia, Cyprus and the UAE. Two-thirds of the 37 Cheap White brands in the TPackSS had neither the correct health warning nor the required tax stamp in at least one country where they were purchased. Cheap Whites are on average less expensive than all other brands, but the price gap is often not as large as anecdotally reported. The cheapest Cheap White cigarettes purchased in one of the TPackSS countries irrespective of the presence of legal signs were still more expensive than the least expensive other brands satisfying both legal requirements. Conclusions We confirmed that many Cheap White brands do not comply with the legal requirements in countries where they are sold, but also found that some of these cigarettes appear to be sold legally even outside their country of origin. The presence of untaxed Cheap Whites undermines tobacco tax policies, while the availability of legal cheap cigarettes is a public health concern. PMID:26418617

WEBSLIDE: A "Virtual" Slide Projector Based on World Wide Web

NASA Astrophysics Data System (ADS)

Barra, Maria; Ferrandino, Salvatore; Scarano, Vittorio

1999-03-01

We present here the design key concepts of WEBSLIDE, a software project whose objective is to provide a simple, cheap and efficient solution for showing slides during lessons in computer labs. In fact, WEBSLIDE allows the video monitors of several client machines (the "STUDENTS") to be synchronously updated by the actions of a particular client machine, called the "INSTRUCTOR." The system is based on the World Wide Web and the software components of WEBSLIDE mainly consists in a WWW server, browsers and small Cgi-Bill scripts. What makes WEBSLIDE particularly appealing for small educational institutions is that WEBSLIDE is built with "off the shelf" products: it does not involve using a specifically designed program but any Netscape browser, one of the most popular browsers available on the market, is sufficient. Another possible use is to use our system to implement "guided automatic tours" through several pages or Intranets internal news bulletins: the company Web server can broadcast to all employees relevant information on their browser.

Is Cheap Labor a Magnet for Capital?

ERIC Educational Resources Information Center

Hanson, John R., II

1995-01-01

Contends that it is widely believed that cheap labor in poor countries attracts foreign investors. Asserts that historical evidence indicates that past patterns of direct foreign investment in poor countries are inconsistent with the cheap-labor argument. Includes two figures and one table. (CFR)

A closer look at 'Cheap White' cigarettes.

PubMed

Ross, Hana; Vellios, Nicole; Clegg Smith, Katherine; Ferguson, Jacqueline; Cohen, Joanna E

2016-09-01

Given the prominence of Cheap Whites in illicit tobacco discussions, we examined various definitions, market presence, brand proliferation, manufacturers, production locations, trademark ownership, prices and compliance with tax stamp and warning labels. Data from peer-reviewed and grey literature, newspapers, trademark registries, governments/international organisation reports, and the tobacco industry were contrasted with two visual legal requirements (tax stamps and warning labels) and prices from the Tobacco Pack Surveillance System (TPackSS). Multiple sources identified 82 Cheap White brands and 53 manufacturers operating at least 82 production facilities. One-third of these manufacturers are in the free zones of Russia, Cyprus and the UAE. Two-thirds of the 37 Cheap White brands in the TPackSS had neither the correct health warning nor the required tax stamp in at least one country where they were purchased. Cheap Whites are on average less expensive than all other brands, but the price gap is often not as large as anecdotally reported. The cheapest Cheap White cigarettes purchased in one of the TPackSS countries irrespective of the presence of legal signs were still more expensive than the least expensive other brands satisfying both legal requirements. We confirmed that many Cheap White brands do not comply with the legal requirements in countries where they are sold, but also found that some of these cigarettes appear to be sold legally even outside their country of origin. The presence of untaxed Cheap Whites undermines tobacco tax policies, while the availability of legal cheap cigarettes is a public health concern. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

DICOM: key concepts--part I.

PubMed

Kabachinski, Jeff

2005-01-01

In this issue and next, we're investigating different sections of the DICOM Standard to get a grip on what it's all about. The bottom line is to facilitate communication and DICOM addresses all the technical aspects to allow complying OEMs to talk to one another. In part 2, IT World completes its overview on DICOM by exploring UID, networking with DICOM, conformance, and conformance statements.

Effects of Otitis Media with Effusion on Hearing in the First 3 Years of Life.

ERIC Educational Resources Information Center

Gravel, Judith S.; Wallace, Ina F.

2000-01-01

Hearing sensitivity was examined prospectively in 114 young children as a function of otitis media with effusion (OEM)status in years 1, 2, and 3. Results indicated that children classified as bilaterally OME positive in years 1, 2, and 3 had significantly poorer hearing than children classified as bilaterally OME free at these periods. (Contains…

Proposals to reject the names Spermacoce stigosa and S. hyssopifolia Sm. and conserve the names S. hyssopifolia Wild. Es oem. & Schult. (Rubiaceae)

USDA-ARS?s Scientific Manuscript database

The genus Spermacoce is a wide spread, common weed that frequently occurs in agricultural situations, and is a member of the family Rubiaceae. Diodella apiculata is a wide spread weedy species found in Central America, the Caribbean, and South America, all the way to Argentina. Two earlier names, S....

Symmetric Gain Optoelectronic Mixers for LADAR

DTIC Science & Technology

2008-12-01

photodetector in the receiver is used as an optoelectronic mixer (OEM). Adding gain to the optoelectronic mixer allows the following transimpedance ...output is the low frequency difference signal, several orders of magnitude lower than the LO signal. Therefore, the gain of the transimpedance ... amplifier (TZA) following the photodetector can be increased, improving LADAR range. The metal-semiconductor- metal (MSM) Schottky detector is such a

Wind Power Plant SCADA and Controls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badrzadeh, Babak; Castillo, Nestor; Bradt, M.

2011-01-01

Modern Wind Power Plants (WPPs) contain a variety of intelligent electronic devices (IEDs), Supervisory Control and Data Acquisition (SCADA) and communication systems. This paper discusses the issues related to a typical WPP's SCADA and Control. Presentation topics are: (1) Wind Turbine Controls; (2) Wind Plant SCADA, OEM SCADA Solutions, Third-Party SCADA Solutions; (3) Wind Plant Control; and (4) Security and Reliability Compliance.

76 FR 37025 - Make Inoperative Exemptions; Vehicle Modifications To Accommodate People With Disabilities, Side...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

... the seat. Many vehicles will depend on side impact air bag technology to meet all of the injury... installing side air bags in vehicle seats and/or door panels and side roof rails. The phase-in of the... expressed concern that: ``* * * torso side air bags are commonly installed in the outboard side of the OEM...

Simple laser vision sensor calibration for surface profiling applications

NASA Astrophysics Data System (ADS)

Abu-Nabah, Bassam A.; ElSoussi, Adnane O.; Al Alami, Abed ElRahman K.

2016-09-01

Due to the relatively large structures in the Oil and Gas industry, original equipment manufacturers (OEMs) have been implementing custom-designed laser vision sensor (LVS) surface profiling systems as part of quality control in their manufacturing processes. The rough manufacturing environment and the continuous movement and misalignment of these custom-designed tools adversely affect the accuracy of laser-based vision surface profiling applications. Accordingly, Oil and Gas businesses have been raising the demand from the OEMs to implement practical and robust LVS calibration techniques prior to running any visual inspections. This effort introduces an LVS calibration technique representing a simplified version of two known calibration techniques, which are commonly implemented to obtain a calibrated LVS system for surface profiling applications. Both calibration techniques are implemented virtually and experimentally to scan simulated and three-dimensional (3D) printed features of known profiles, respectively. Scanned data is transformed from the camera frame to points in the world coordinate system and compared with the input profiles to validate the introduced calibration technique capability against the more complex approach and preliminarily assess the measurement technique for weld profiling applications. Moreover, the sensitivity to stand-off distances is analyzed to illustrate the practicality of the presented technique.

Utilization of Open Source Technology to Create Cost-Effective Microscope Camera Systems for Teaching.

PubMed

Konduru, Anil Reddy; Yelikar, Balasaheb R; Sathyashree, K V; Kumar, Ankur

2018-01-01

Open source technologies and mobile innovations have radically changed the way people interact with technology. These innovations and advancements have been used across various disciplines and already have a significant impact. Microscopy, with focus on visually appealing contrasting colors for better appreciation of morphology, forms the core of the disciplines such as Pathology, microbiology, and anatomy. Here, learning happens with the aid of multi-head microscopes and digital camera systems for teaching larger groups and in organizing interactive sessions for students or faculty of other departments. The cost of the original equipment manufacturer (OEM) camera systems in bringing this useful technology at all the locations is a limiting factor. To avoid this, we have used the low-cost technologies like Raspberry Pi, Mobile high definition link and 3D printing for adapters to create portable camera systems. Adopting these open source technologies enabled us to convert any binocular or trinocular microscope be connected to a projector or HD television at a fraction of the cost of the OEM camera systems with comparable quality. These systems, in addition to being cost-effective, have also provided the added advantage of portability, thus providing the much-needed flexibility at various teaching locations.

First non-OEM steam-generator replacement in US a success

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hendsbee, P.M.; Lees, M.D.; Smith, J.C.

1994-04-01

In selecting replacements for major powerplant components, a fresh approach can be advantageous--even when complex nuclear components are involved. This was the experience at Unit 2 of Millstone nuclear station, which features an 870-MW pressurized-water reactor (PWR) with two nuclear recirculating steam generators. The unit began operation in 1975. In the early 1980s, pitting problems surfaced in the steam generator tubing; by the mid eighties, tube corrosion had reached an unacceptable level. Virtually all of the 17,000 tubes in the two units were deteriorating, with 2500 plugged and 5000 sleeved. Several new problems also were identified, including secondary-side circumferential crackingmore » of the Alloy 600 tubing near the tubesheet face, and deterioration of the carbon steel egg-crate tube supports. Despite improvements to primary and secondary steam-generator water chemistry, including almost complete copper removal from the condensate and feedwater loops, Northeast Utilities (NU) was unable to completely control degradation of the tube bundles. The utility decided in 1987 that full replacement was the most viable alternative. NU made a bold move, selecting a supplier other than the original equipment manufacturer (OEM).« less

Natural Fiber Composite Retting, Preform Manufacture and Molding (Project 18988/Agreement 16313)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simmons, Kevin L.; Howe, Daniel T.; Laddha, Sachin

2009-12-31

Plant-based natural fibers can be used in place of glass in fiber reinforced automotive composites to reduce weight, cost and provide environmental benefits. Current automotive applications use natural fibers in injection molded thermoplastics for interior, non-structural applications. Compression molded natural fiber reinforced thermosets have the opportunity to extend natural fiber composite applications to structural and semi-structural parts and exterior parts realizing further vehicle weight savings. The development of low cost molding and fiber processing techniques for large volumes of natural fibers has helped in understanding the barriers of non-aqueous retting. The retting process has a significant effect on the fibermore » quality and its processing ability that is related to the natural fiber composite mechanical properties. PNNL has developed a compression molded fiber reinforced composite system of which is the basis for future preforming activities and fiber treatment. We are using this process to develop preforming techniques and to validate fiber treatment methods relative to OEM provided application specifications. It is anticipated for next fiscal year that demonstration of larger quantities of SMC materials and molding of larger, more complex components with a more complete testing regimen in coordination with Tier suppliers under OEM guidance.« less

Fatigue based design and analysis of wheel hub for Student formula car by Simulation Approach

NASA Astrophysics Data System (ADS)

Gowtham, V.; Ranganathan, A. S.; Satish, S.; Alexis, S. John; Siva kumar, S.

2016-09-01

In the existing design of Wheel hub used for Student formula cars, the brake discs cannot be removed easily since the disc is mounted in between the knuckle and hub. In case of bend or any other damage to the disc, the replacement of the disc becomes difficult. Further using OEM hub and knuckle that are used for commercial vehicles will result in increase of unsprung mass, which should be avoided in Student formula cars for improving the performance. In this design the above mentioned difficulties have been overcome by redesigning the hub in such a way that the brake disc could be removed easily by just removing the wheel and the caliper and also it will have reduced weight when compared to existing OEM hub. A CAD Model was developed based on the required fatigue life cycles. The forces acting on the hub were calculated and linear static structural analysis was performed on the wheel hub for three different materials using ANSYS Finite Element code V 16.2. The theoretical fatigue strength was compared with the stress obtained from the structural analysis for each material.

Commercializing a U.S. piezoceramic linear motor

NASA Astrophysics Data System (ADS)

Diehl, Rick W.

2000-06-01

A small low-cost piezoceramic linear motor has been developed in the US and is being commercialized by EDO Corporation, working with a leading motion control OEM and with a prominent US corporate research laboratory. First generation motor design has emphasized high displacement at up to 200mm per second velocity with 3.5 Newtons force with high resolution, short time constant and a 15 volt power supply at a cost of less than 100 dollars. Motor dimensions of 30 by 50 by 4 mm allow broad configuration choices, al hidden within the motion control slide. The EDO approach was to build on its core competence in high reliability electroceramic material engineering and production, and to use a strategy of back-integrating, or outsourcing of recent advances outside Edo in piezoceramics, while forward- integrating into specific emerging applications known intimately by the OEM in the market. The strategy provided design focus that has led to a cost-effective advance in 'solid-state actuation and control'. This is considered a classic case of successful industrial integration of an enabling technology across organizations in order to access the needed mix of technology for development of an innovative and competitive solution.

Smoking patterns in Great Britain: the rise of cheap cigarette brands and roll your own (RYO) tobacco

PubMed Central

Gilmore, Anna B.; Tavakoly, Behrooz; Hiscock, Rosemary; Taylor, Gordon

2015-01-01

Background In Britain, the tobacco industry segments cigarettes into four price categories—premium, mid-price, economy and ultra-low-price (ULP). Our previous work shows that tobacco companies have kept ULP prices stable in real terms. Roll your own (RYO) tobacco remains cheaper still. Methods Analysis of 2001–08 General Household Survey data to examine trends in use of these cheap products and, using logistic regression, the profile of users of these products. Results Among smokers, the proportion using cheap products (economy, ULP and RYO combined) increased significantly in almost all age groups and geographic areas. Increases were most marked in under 24 year olds, 76% of whom smoked cheap cigarettes by 2008. All cheap products were more commonly used in lower socio-economic groups. Men and younger smokers were more likely to smoke RYO while women smoked economy brands. Smokers outside London and the South East of England were more likely to smoke some form of cheap tobacco even once socio-economic differences were accounted for. Conclusions This paper demonstrates that cheap tobacco use is increasing among young and disadvantaged smokers compromising declines in population smoking prevalence. Thus, tobacco industry pricing appears to play a key role in explaining smoking patterns and inequalities in smoking. PMID:25118219

Survey of Condition Indicators for Condition Monitoring Systems (Open Access)

DTIC Science & Technology

2014-09-29

Hinesburg, Vermont, 05461, USA jz@renewablenrgsystems.com ABSTRACT Currently, the wind energy industry is swiftly changing its maintenance strategy...from schedule based maintenance to predictive based maintenance . Condition monitoring systems (CMS) play an important role in the predictive... maintenance cycle. As condition monitoring systems are being adopted by more and more OEM and O&M service providers from the wind energy industry, it is

Engine Development Design Margins Briefing Charts

NASA Technical Reports Server (NTRS)

Bentz, Chuck

2006-01-01

New engines experience durability problems after entering service. The most prevalent and costly is the hot section, particularly the high-pressure turbine. The origin of durability problems can be traced back to: 1) the basic aero-mechanical design systems, assumptions, and design margins used by the engine designers, 2) the available materials systems, and 3) to a large extent, aggressive marketing in a highly competitive environment that pushes engine components beyond the demonstrated capability of the basic technology available for the hardware designs. Unfortunately the user must operate the engine in the service environment in order to learn the actual thrust loading and the time at max effort take-off conditions used in service are needed to determine the hot section life. Several hundred thousand hours of operational service will be required before the demonstrated reliability of a fleet of engines or the design deficiencies of the engine hot section parts can be determined. Also, it may take three to four engine shop visits for heavy maintenance on the gas path hardware to establish cost effective build standards. Spare parts drive the oerator's engine maintenance costs but spare parts also makes lots of money for the engine manufacturer during the service life of an engine. Unless competition prevails for follow-on engine buys, there is really no motivation for an OEM to spend internal money to improve parts durability and reduce earnings derived from a lucrative spare parts business. If the hot section life is below design goals or promised values, the OEM migh argue that the engine is being operated beyond its basic design intent. On the other hand, the airframer and the operator will continue to remind the OEM that his engine was selected based on a lot of promises to deliver spec thrust with little impact on engine service life if higher thrust is used intermittently. In the end, a standoff prevails and nothing gets fixed. This briefing will propose ways to hold competing engine manufacturers more accountable for engine hot section design margins during the entire Engine Development process as well as provide tools to assess the design temperature margins in the hot section parts of Service Engines.

Smoking patterns in Great Britain: the rise of cheap cigarette brands and roll your own (RYO) tobacco.

PubMed

Gilmore, Anna B; Tavakoly, Behrooz; Hiscock, Rosemary; Taylor, Gordon

2015-03-01

In Britain, the tobacco industry segments cigarettes into four price categories-premium, mid-price, economy and ultra-low-price (ULP). Our previous work shows that tobacco companies have kept ULP prices stable in real terms. Roll your own (RYO) tobacco remains cheaper still. Analysis of 2001-08 General Household Survey data to examine trends in use of these cheap products and, using logistic regression, the profile of users of these products. Among smokers, the proportion using cheap products (economy, ULP and RYO combined) increased significantly in almost all age groups and geographic areas. Increases were most marked in under 24 year olds, 76% of whom smoked cheap cigarettes by 2008. All cheap products were more commonly used in lower socio-economic groups. Men and younger smokers were more likely to smoke RYO while women smoked economy brands. Smokers outside London and the South East of England were more likely to smoke some form of cheap tobacco even once socio-economic differences were accounted for. This paper demonstrates that cheap tobacco use is increasing among young and disadvantaged smokers compromising declines in population smoking prevalence. Thus, tobacco industry pricing appears to play a key role in explaining smoking patterns and inequalities in smoking. © The Author 2014. Published by Oxford University Press on behalf of Faculty of Public Health.

Reviews

NASA Astrophysics Data System (ADS)

2005-01-01

WE RECOMMEND Advancing Physics CD Quick Tour This software makes the Advancing Physics CD easier to use. From Silicon to Computer This CD on computer technology operates like an electronic textbook. Powers of Ten This documentary film gives pupils a feel for the scale of our universe. Multimedia Waves The material on this CD demonstrates various wave phenomena. Infrared thermometer This instant response, remote sensor has numerous lab applications. Magic Universe, The Oxford Guide to Modern Science Acollection of short essays, this book is aimed at A-level students. Fermi Remembered Ajoy to read, this piece of non-fiction leaves you eager for more. Big Bang (lecture and book) Both the book and the lecture are engaging and hugely entertaining. WORTH A LOOK The Way Things Go Lasting just 30 minutes, this film will liven up any mechanics lesson. The Video Encyclopaedia of Physics Demonstrations It may blow your budget, but this DVD is a superb physics resource. Go!Link and Go!Temp Go!Link is a useful, cheap datalogger. Go!Temp seems superfluous. Cracker snaps Cheap and cheerful, cracker snaps can be used to demonstrate force. VPython This 3D animation freeware can be adapted to fit your needs. HANDLE WITH CARE Physics A-Level Presentations It might be better to generate slides yourself rather than modify these. London Planetarium and Madame Tussaud's A day out here is definitely not a worthwhile science excursion.

Note: A simple sample transfer alignment for ultra-high vacuum systems.

PubMed

Tamtögl, A; Carter, E A; Ward, D J; Avidor, N; Kole, P R; Jardine, A P; Allison, W

2016-06-01

The alignment of ultra-high-vacuum sample transfer systems can be problematic when there is no direct line of sight to assist the user. We present the design of a simple and cheap system which greatly simplifies the alignment of sample transfer devices. Our method is based on the adaptation of a commercial digital camera which provides live views from within the vacuum chamber. The images of the camera are further processed using an image recognition and processing code which determines any misalignments and reports them to the user. Installation has proven to be extremely useful in order to align the sample with respect to the transfer mechanism. Furthermore, the alignment software can be easily adapted for other systems.

Testing the effectiveness of certainty scales, cheap talk, and dissonance-minimization in reducing hypothetical bias in contingent valuation studies

Treesearch

Mark Morrison; Thomas C. Brown

2009-01-01

Stated preference methods such as contingent valuation and choice modeling are subject to various biases that may lead to differences between actual and hypothetical willingness to pay. Cheap talk, follow-up certainty scales, and dissonance minimization are three techniques for reducing this hypothetical bias. Cheap talk and certainty scales have received considerable...

A comparison of cheap talk and alternative certainty calibration techniques in contingent valuation

Treesearch

Mihail Samnaliev; Thomas Stevens; Thomas More

2003-01-01

A field test of cheap talk and two types of certainty calibration in contingent valuation of public lands indicated that cheap talk does not reduce WTP estimates. Use of a ten point certainty calibration scale reduces WTP estimates by about half. However, adjusting for uncertainty using a 'Not Sure' option does not reduce WTP estimates but increases the...

A Smart Voltage and Current Monitoring System for Three Phase Inverters Using an Android Smartphone Application

PubMed Central

Mnati, Mohannad Jabbar; Van den Bossche, Alex; Chisab, Raad Farhood

2017-01-01

In this paper, a new smart voltage and current monitoring system (SVCMS) technique is proposed. It monitors a three phase electrical system using an Arduino platform as a microcontroller to read the voltage and current from sensors and then wirelessly send the measured data to monitor the results using a new Android application. The integrated SVCMS design uses an Arduino Nano V3.0 as the microcontroller to measure the results from three voltage and three current sensors and then send this data, after calculation, to the Android smartphone device of an end user using Bluetooth HC-05. The Arduino Nano V3.0 controller and Bluetooth HC-05 are a cheap microcontroller and wireless device, respectively. The new Android smartphone application that monitors the voltage and current measurements uses the open source MIT App Inventor 2 software. It allows for monitoring some elementary fundamental voltage power quality properties. An effort has been made to investigate what is possible using available off-the-shelf components and open source software. PMID:28420132

A Smart Voltage and Current Monitoring System for Three Phase Inverters Using an Android Smartphone Application.

PubMed

Mnati, Mohannad Jabbar; Van den Bossche, Alex; Chisab, Raad Farhood

2017-04-15

In this paper, a new smart voltage and current monitoring system (SVCMS) technique is proposed. It monitors a three phase electrical system using an Arduino platform as a microcontroller to read the voltage and current from sensors and then wirelessly send the measured data to monitor the results using a new Android application. The integrated SVCMS design uses an Arduino Nano V3.0 as the microcontroller to measure the results from three voltage and three current sensors and then send this data, after calculation, to the Android smartphone device of an end user using Bluetooth HC-05. The Arduino Nano V3.0 controller and Bluetooth HC-05 are a cheap microcontroller and wireless device, respectively. The new Android smartphone application that monitors the voltage and current measurements uses the open source MIT App Inventor 2 software. It allows for monitoring some elementary fundamental voltage power quality properties. An effort has been made to investigate what is possible using available off-the-shelf components and open source software.

RIPPLE: Scalable Medical Telemetry System for Supporting Combat Rescue

DTIC Science & Technology

2014-01-09

This reduces the burden of transporting multiple systems. For Ripple, we prototyped a system that combined a pulse oximeter , an electrocardiogram, a...o Nonin OEM III Module or Nonin XPOD Pulse Oximeters o Nonin 8000 series PureLight sensors o Shimmer Sensing ECG Board Identify applicable...equipment, e.g. pulse and respiration rate. Advances in wireless communications and miniaturization of electronics has led to the development and

Safety: Special Effects of Thermal Runaway Chapter Heading for Encyclopedia of Electrochemical Power Sources (PREPRINT)

DTIC Science & Technology

2007-11-09

been following developments related to the recent lithium ion battery recalls and is preparing itself for revising its battery safety standard...manufacturer (OEM) Critical Components Committee. In October 2006, the IPC Lithium Ion Battery Subcommittee, that represents both the major...cover process requirements, quality control and assurance for lithium ion battery cells. Electric and Hybrid Electric Vehicle Power Source Testing In

6th Annual National Small Business Conference

DTIC Science & Technology

2009-06-03

Extension Partnership – MIT Lean Advancement Initiative – Customers • Lean Tools – Value Stream Mapping – Kaizen Events Center for Management...Blue denotes kaizen events Most suppliers did not have in-house lean capability therefore the OEM and customer facilitated the events 36 Center for...Management & Economic Research 37 Kaizen Events • Kaizen is the process of: – Identifying & eliminating waste – as quickly as possible – at the

Electron-beam lithography data preparation based on multithreading MGS/PROXECCO

NASA Astrophysics Data System (ADS)

Eichhorn, Hans; Lemke, Melchior; Gramss, Juergen; Buerger, B.; Baetz, Uwe; Belic, Nikola; Eisenmann, Hans

2001-04-01

This paper will highlight an enhanced MGS layout data post processor and the results of its industrial application. Besides the preparation of hierarchical GDS layout data, the processing of flat data has been drastically accelerated. The application of the Proximity Correction in conjunction with the OEM version of the PROXECCO was crowned with success for data preparation of mask sets featuring 0.25 micrometers /0.18 micrometers integration levels.

High power diode lasers for solid-state laser pumps

NASA Technical Reports Server (NTRS)

Linden, Kurt J.; Mcdonnell, Patrick N.

1994-01-01

The development and commercial application of high power diode laser arrays for use as solid-state laser pumps is described. Such solid-state laser pumps are significantly more efficient and reliable than conventional flash-lamps. This paper describes the design and fabrication of diode lasers emitting in the 780 - 900 nm spectral region, and discusses their performance and reliability. Typical measured performance parameters include electrical-to-optical power conversion efficiencies of 50 percent, narrow-band spectral emission of 2 to 3 nm FWHM, pulsed output power levels of 50 watts/bar with reliability values of over 2 billion shots to date (tests to be terminated after 10 billion shots), and reliable operation to pulse lengths of 1 ms. Pulse lengths up to 5 ms have been demonstrated at derated power levels, and CW performance at various power levels has been evaluated in a 'bar-in-groove' laser package. These high-power 1-cm stacked-bar arrays are now being manufactured for OEM use. Individual diode laser bars, ready for package-mounting by OEM customers, are being sold as commodity items. Commercial and medical applications of these laser arrays include solid-state laser pumping for metal-working, cutting, industrial measurement and control, ranging, wind-shear/atmospheric turbulence detection, X-ray generation, materials surface cleaning, microsurgery, ophthalmology, dermatology, and dental procedures.

A Storm's Approach; Hurricane Shelter Training in a Digital Age

NASA Technical Reports Server (NTRS)

Boyarsky, Andrew; Burden, David; Gronstedt, Anders; Jinman, Andrew

2012-01-01

New York City's Office of Emergency Management (OEM) originally ran hundreds of classroom based courses, where they brought together civil servants to learn how to run a Hurricane Shelter (HS). This approach was found to be costly, time consuming and lacked any sense of an impending disaster and need for emergency response. In partnership with the City of New York University School of Professional studies, Gronstedt Group and Daden Limited, the OEM wanted to create a simulation that overcame these issues, providing users with a more immersive and realistic approach at a lower cost. The HS simulation was built in the virtual world Second Life (SL). Virtual worlds are a genre of online communities that often take the form of a computer-based simulated environments, through which users can interact with one another and use or create objects. Using this technology allowed managers to apply their knowledge in both classroom and remote learning environments. The shelter simulation is operational 24/7, guiding users through a 4 1/2 hour narrative from start to finish. This paper will describe the rationale for the project, the technical approach taken - particularly the use of a web based authoring tool to create and manage the immersive simulation, and the results from operational use.

Your Next Airplane: Just Hit Print

DTIC Science & Technology

2013-04-01

American access to cheap and near instant fabrication. If left to development only by those envisioning cheap plastic gimmicks, 3-D printing will fail to...only by those envisioning cheap plastic gimmicks, 3-D printing will fail to significantly impact the market, but if properly managed, 3-D printing can...resolution, typically between 10 and 100 micrometers. In the filament fusing process, usually with plastic , but possible with many low melting point

The Application of Magnesium Alloys in Aircraft Interiors — Changing the Rules

NASA Astrophysics Data System (ADS)

Davis, Bruce

The commercial aircraft market is forecast to steadily grow over the next two decades. Part of this growth is driven by the desire of airlines to replace older models in their fleet with newer, more fuel efficient designs, to realize lower operating costs and to address the rising cost of aviation fuel. As such the aircraft OEMs are beginning to set more and more demanding mass targets on their new platforms.

Detection of Low-volume Blood Loss: Compensatory Reserve Versus Traditional Vital Signs

DTIC Science & Technology

2014-01-01

studies have demonstrated that photoplethysmogram (PPG) wave forms obtained with a pulse oximeter sensor significantly change with volume loss.5 With this...donation, including PPG wave forms (OEM III pulse oximeter , Nonin, Minneapolis, MN), and a noninvasive BPwave form (ccNexfin, Edwards Lifesciences, Irvine...a PPG wave form obtained with a pulse oximeter sensor. CRI is calculated after 30 heart beats and is recalculated beat-to-beat in a continuous

Aerospace Non Chrome Corrosion Inhibiting Primer Systems

DTIC Science & Technology

2009-09-01

Meet all HSE specifications, TSCA, REACh, Akzo • Strippable • No weight increase over current system • Meet specification requirements for corrosion, not...Positive and negative controls • Primer only and topcoated samples Aerospace Coatings | Title 9 OEM CF Optimization/ Down Selects •Usual issues...found to be true • Good NSS ≠ Good filiform ≠ Good cure ≠ Good application properties • Down select process is to minimize ≠ and move to a balance of

Analysis of the Glucocorticoid Receptor in Spontaneous and Drug-induced Steroid Resistant Mutants Isolated from the Human Leukemic Cell Line CEM-C7

DTIC Science & Technology

1991-01-04

be due to defects in GR function. However, the loss of GR function in x" S49 cells is paralleled by the loss of GR mRNA which is not seen in x’ OEM ...in the protein transcription factor IIIA from Xepopus oocytes. EMBO J. 4: 1609-1614. Milgrom. E.; Atger, M.; Baulieu, E.-E. 1973 Acidophilic

Risk Management Approach & Progress in Cd and Cr6+ Elimination

DTIC Science & Technology

2014-11-18

Documentation Available by 2015? Gaps Conversion Coating- Aluminum Avionics/Electrical- Class 3 9 7 Medium yes- joint service/OEM/ NASA effort to...Optimized conditions validated by NASA . – FRC validation: immersion process – Based on data from the lab Surtec 650V optimization, an 1800-gallon tank...acting similarly, 650V not • Plans: scale up to 80 gallon process line; assess Metalast TCP/HF- EPA and Henkel products; further study 650V

A New ’Availability-Payment’ Model for Pricing Performance-Based Logistics Contracts

DTIC Science & Technology

2014-04-30

maintenance network connected to the inventory and Original Equipment Manufacturer (OEM) used in this paper. The input to the Petri net in Figure 2 is the...contract structures. The model developed in this paper uses an affine controller to drive a discrete event simulator ( Petri net ) that produces...discrete event simulator ( Petri net ) that produces availability and cost measures. The model is used to explore the optimum availability assessment

Pulse Oximeter Plethysmographic Waveform Changes in Awake, Spontaneously Breathing, Hypovolemic Volunteers

DTIC Science & Technology

2011-02-01

Methods of Measurement All subjects were instrumented with 3 Nonin pulse oximeter sensors ( Nonin Medical, Plymouth, MN; OEM III module, 16-bit data...ring finger of the left hand. Unlike standard pulse oximeters that have autocalibration capability, the Nonin pulse oximeter did not alter the raw...stroke volume and are therefore presented as percentage change from baseline levels. The PPG and Spo2 values from the Nonin pulse oxime- ter sensors were

Fuel Economy and Emissions of a Vehicle Equipped with an Aftermarket Flexible-Fuel Conversion Kit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, John F; Huff, Shean P; West, Brian H

2012-04-01

The U.S. Environmental Protection Agency (EPA) grants Certificates of Conformity for alternative fuel conversion systems and also offers other forms of premarket registration of conversion kits for use in vehicles more than two model years old. Use of alternative fuels such as ethanol, natural gas, and propane are encouraged by the Energy Policy Act of 1992. Several original equipment manufacturers (OEMs) produce emissions-certified vehicles capable of using alternative fuels, and several alternative fuel conversion system manufacturers produce EPA-approved conversion systems for a variety of alternative fuels and vehicle types. To date, only one manufacturer (Flex Fuel U.S.) has received EPAmore » certifications for ethanol fuel (E85) conversion kits. This report details an independent evaluation of a vehicle with a legal installation of a Flex Fuel U.S. conversion kit. A 2006 Dodge Charger was baseline tested with ethanol-free certification gasoline (E0) and E20 (gasoline with 20 vol % ethanol), converted to flex-fuel operation via installation of a Flex Box Smart Kit from Flex Fuel U.S., and retested with E0, E20, E50, and E81. Test cycles included the Federal Test Procedure (FTP or city cycle), the highway fuel economy test (HFET), and the US06 test (aggressive driving test). Averaged test results show that the vehicle was emissions compliant on E0 in the OEM condition (before conversion) and compliant on all test fuels after conversion. Average nitrogen oxide (NOx) emissions exceeded the Tier 2/Bin 5 intermediate life NO{sub X} standard with E20 fuel in the OEM condition due to two of three test results exceeding this standard [note that E20 is not a legal fuel for non-flexible-fuel vehicles (non-FFVs)]. In addition, one E0 test result before conversion and one E20 test result after conversion exceeded the NOX standard, although the average result in these two cases was below the standard. Emissions of ethanol and acetaldehyde increased with increasing ethanol, while nonmethane organic gas and CO emissions remained relatively unchanged for all fuels and cycles. Higher fraction ethanol blends appeared to decrease NO{sub X} emissions on the FTP and HFET (after conversion). As expected, fuel economy (miles per gallon) decreased with increasing ethanol content in all cases.« less

Field Instrumentation With Bricks: Wireless Networks Built From Tough, Cheap, Reliable Field Computers

NASA Astrophysics Data System (ADS)

Fatland, D. R.; Anandakrishnan, S.; Heavner, M.

2004-12-01

We describe tough, cheap, reliable field computers configured as wireless networks for distributed high-volume data acquisition and low-cost data recovery. Running under the GNU/Linux open source model these network nodes ('Bricks') are intended for either autonomous or managed deployment for many months in harsh Arctic conditions. We present here results from Generation-1 Bricks used in 2004 for glacier seismology research in Alaska and Antarctica and describe future generation Bricks in terms of core capabilities and a growing list of field applications. Subsequent generations of Bricks will feature low-power embedded architecture, large data storage capacity (GB), long range telemetry (15 km+ up from 3 km currently), and robust operational software. The list of Brick applications is growing to include Geodetic GPS, Bioacoustics (bats to whales), volcano seismicity, tracking marine fauna, ice sounding via distributed microwave receivers and more. This NASA-supported STTR project capitalizes on advancing computer/wireless technology to get scientists more data per research budget dollar, solving system integration problems and thereby getting researchers out of the hardware lab and into the field. One exemplary scenario: An investigator can install a Brick network in a remote polar environment to collect data for several months and then fly over the site to recover the data via wireless telemetry. In the past year Brick networks have moved beyond proof-of-concept to the full-bore development and testing stage; they will be a mature and powerful tool available for IPY 2007-8.

Lowest cost due to highest productivity and highest quality

NASA Astrophysics Data System (ADS)

Wenk, Daniel

2003-03-01

Since global purchasing in the automotive industry has been taken up all around the world there is one main key factor that makes a TB-supplier today successful: Producing highest quality at lowest cost. The fact that Tailored Blanks, which today may reach up to 1/3 of a car body weight, are purchased on the free market but from different steel suppliers, especially in Europe and NAFTA, the philosophy on OEM side has been changing gradually towards tough evaluation criteria. "No risk at the stamping side" calls for top quality Tailored- or Tubular Blank products. Outsourcing Tailored Blanks has been starting in Japan but up to now without any quality request from the OEM side like ISO 13919-1B (welding quality standard in Europe and USA). Increased competition will automatically push the quality level and the ongoing approach to combine high strength steel with Tailored- and Tubular Blanks will ask for even more reliable system concepts which enables to weld narrow seams at highest speed. Beside producing quality, which is the key to reduce one of the most important cost driver "material scrap," in-line quality systems with true and reliable evaluation is going to be a "must" on all weld systems. Traceability of all process related data submitted to interfaces according to customer request in combination with ghost-shift-operation of TB systems are tomorrow's state-of-the-art solutions of Tailored Blank-facilities.

From advanced driver assistance to autonomous driving: perspectives for photonics sensors

NASA Astrophysics Data System (ADS)

Cochard, Jacques; Bouyé, Clémentine

2016-03-01

Optics components entered in the automotive vehicle one century ago with headlamps and since then move towards even more sophisticated designs in lighting functions. Photonics sensors are just entering now in this market through driver assistance, in complement of incumbent ultrasonic and radar technologies. Gain of market shares is expected for this components with autonomous driving, that was few years ago a nice dream and whose early results exceed surprisingly expectations of roadmaps and historic OEM have quickly joined the course launched by Google Company 5 years ago. Technological components, among them CMOS camera followed by Laser Scanners, cost-effective flash LIDAR are already experimenting their first miles in real condition and new consumers in South Asia plebiscite this new way to drive cars .The issue is still for photonics companies to move from well suited technological solution to mass-production components with corresponding cost reduction. MEMS components that follow the same curve 15 years ago (with market entries in airbags, tire pressure monitoring systems…) experimented the hard pressure on price for wide market adoption. Besides price, which is a CFO issue, photonic technologies will keep in place if they can both reassure OEM CEO and let CTO and designers dream. Reassurance will be through higher level of standardization and reliability of these components whereas dream will be linked to innovative sensing application, e.g spectroscopy.

Total Particle Number Emissions from Modern Diesel, Natural Gas, and Hybrid Heavy-Duty Vehicles During On-Road Operation.

PubMed

Wang, Tianyang; Quiros, David C; Thiruvengadam, Arvind; Pradhan, Saroj; Hu, Shaohua; Huai, Tao; Lee, Eon S; Zhu, Yifang

2017-06-20

Particle emissions from heavy-duty vehicles (HDVs) have significant environmental and public health impacts. This study measured total particle number emission factors (PNEFs) from six newly certified HDVs powered by diesel and compressed natural gas totaling over 6800 miles of on-road operation in California. Distance-, fuel- and work-based PNEFs were calculated for each vehicle. Distance-based PNEFs of vehicles equipped with original equipment manufacturer (OEM) diesel particulate filters (DPFs) in this study have decreased by 355-3200 times compared to a previous retrofit DPF dynamometer study. Fuel-based PNEFs were consistent with previous studies measuring plume exhaust in the ambient air. Meanwhile, on-road PNEF shows route and technology dependence. For vehicles with OEM DPFs and Selective Catalytic Reduction Systems, PNEFs under highway driving (i.e., 3.34 × 10 12 to 2.29 × 10 13 particles/mile) were larger than those measured on urban and drayage routes (i.e., 5.06 × 10 11 to 1.31 × 10 13 particles/mile). This is likely because a significant amount of nucleation mode volatile particles were formed when the DPF outlet temperature reached a critical value, usually over 310 °C, which was commonly achieved when vehicle speed sustained over 45 mph. A model year 2013 diesel HDV produced approximately 10 times higher PNEFs during DPF active regeneration events than nonactive regeneration.

Anti-Idling Battery for Truck Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keith Kelly

2011-09-30

In accordance to the Assistance Agreement DE-EE0001036, the objective of this project was to develop an advanced high voltage lithium-ion battery for use in an all-electric HVAC system for Class-7-8 heavy duty trucks. This system will help heavy duty truck drivers meet the tough new anti-idling laws being implemented by over 23 states. Quallion will be partnering with a major OEM supplier of HVAC systems to develop this system. The major OEM supplier will provide Quallion the necessary interface requirements and HVAC hardware to ensure successful testing of the all-electric system. At the end of the program, Quallion will delivermore » test data on three (3) batteries as well as test data for the prototype HVAC system. The objectives of the program are: (1) Battery Development - Objective 1 - Define battery and electronics specifications in preparation for building the prototype module. (Completed - summary included in report) and Objective 2 - Establish a functional prototype battery and characterize three batteries in-house. (Completed - photos and data included in report); (2) HVAC Development - Objective 1 - Collaborate with manufacturers to define HVAC components, layout, and electronics in preparation for establishing the prototype system. (Completed - photos and data included in report) and Objective 2 - Acquire components for three functional prototypes for use by Quallion. (Completed - photos and data included in report).« less

Regulatory Compliance in Multi-Tier Supplier Networks

NASA Technical Reports Server (NTRS)

Goossen, Emray R.; Buster, Duke A.

2014-01-01

Over the years, avionics systems have increased in complexity to the point where 1st tier suppliers to an aircraft OEM find it financially beneficial to outsource designs of subsystems to 2nd tier and at times to 3rd tier suppliers. Combined with challenging schedule and budgetary pressures, the environment in which safety-critical systems are being developed introduces new hurdles for regulatory agencies and industry. This new environment of both complex systems and tiered development has raised concerns in the ability of the designers to ensure safety considerations are fully addressed throughout the tier levels. This has also raised questions about the sufficiency of current regulatory guidance to ensure: proper flow down of safety awareness, avionics application understanding at the lower tiers, OEM and 1st tier oversight practices, and capabilities of lower tier suppliers. Therefore, NASA established a research project to address Regulatory Compliance in a Multi-tier Supplier Network. This research was divided into three major study efforts: 1. Describe Modern Multi-tier Avionics Development 2. Identify Current Issues in Achieving Safety and Regulatory Compliance 3. Short-term/Long-term Recommendations Toward Higher Assurance Confidence This report presents our findings of the risks, weaknesses, and our recommendations. It also includes a collection of industry-identified risks, an assessment of guideline weaknesses related to multi-tier development of complex avionics systems, and a postulation of potential modifications to guidelines to close the identified risks and weaknesses.

Analysis of Coupled Seals, Secondary and Powerstream Flow Fields in Aircraft and Aerospace Turbomachines

NASA Technical Reports Server (NTRS)

Athavale, M. M.; Ho, Y. H.; Prezekwas, A. J.

2005-01-01

Higher power, high efficiency gas turbine engines require optimization of the seals and secondary flow systems as well as their impact on the powerstream. This work focuses on two aspects: 1. To apply the present day CFD tools (SCISEAL) to different real-life secondary flow applications from different original equipment manufacturers (OEM s) to provide feedback data and 2. Develop a computational methodology for coupled time-accurate simulation of the powerstream and secondary flow with emphasis on the interaction between the disk-cavity and rim seals flows with the powerstream (SCISEAL-MS-TURBO). One OEM simulation was of the Allison Engine Company T-56 turbine drum cavities including conjugate heat transfer with good agreement with data and provided design feedback information. Another was the GE aspirating seal where the 3-D CFD simulations played a major role in analysis and modification of that seal configuration. The second major objective, development of a coupled flow simulation capability was achieved by using two codes MS-TURBO for the powerstream and SCISEAL for the secondary flows with an interface coupling algorithm. The coupled code was tested against data from three differed configurations: 1. bladeless-rotor-stator-cavity turbine test rig, 2. UTRC high pressure turbine test rig, and, 3. the NASA Low-Speed-Air Compressor rig (LSAC) with results and limitations discussed herein.

Performance Evaluation of New-Generation Pulse Oximeters in the NICU: Observational Study.

PubMed

Nizami, Shermeen; Greenwood, Kim; Barrowman, Nick; Harrold, JoAnn

2015-09-01

This crossover observational study compares the data characteristics and performance of new-generation Nellcor OXIMAX and Masimo SET SmartPod pulse oximeter technologies. The study was conducted independent of either original equipment manufacturer (OEM) across eleven preterm infants in a Neonatal Intensive Care Unit (NICU). The SmartPods were integrated with Dräger Infinity Delta monitors. The Delta monitor measured the heart rate (HR) using an independent electrocardiogram sensor, and the two SmartPods collected arterial oxygen saturation (SpO2) and pulse rate (PR). All patient data were non-Gaussian. Nellcor PR showed a higher correlation with the HR as compared to Masimo PR. The statistically significant difference found in their median values (1% for SpO2, 1 bpm for PR) was deemed clinically insignificant. SpO2 alarms generated by both SmartPods were observed and categorized for performance evaluation. Results for sensitivity, positive predictive value, accuracy and false alarm rates were Nellcor (80.3, 50, 44.5, 50%) and Masimo (72.2, 48.2, 40.6, 51.8%) respectively. These metrics were not statistically significantly different between the two pulse oximeters. Despite claims by OEMs, both pulse oximeters exhibited high false alarm rates, with no statistically or clinically significant difference in performance. These findings have a direct impact on alarm fatigue in the NICU. Performance evaluation studies can also impact medical device purchase decisions made by hospital administrators.

From implant planning to surgical execution: an integrated approach for surgery in oral implantology.

PubMed

Chiarelli, Tommaso; Franchini, Federico; Lamma, Achille; Lamma, Evelina; Sansoni, Tommaso

2012-03-01

Using oral implantology software and transferring the preoperative planning into a stereolithographic model, prosthodontists can produce the related surgical guide. This procedure has some disadvantages: bone-supported stent invasiveness, lack of references due to scattering and non-negligible stereolithography cost. An alternative solution is presented that provides an ideal surgical stent (not invasive, precise, and cheap) as a result. This work focuses on the third phase of a fully 3D approach to oral implant planning, that starts by CT scanning a patient who wears a markers-equipped radiological stent, continues exploiting built-on-purpose preoperative planning software, and finishes producing the ideal surgical template. A 5-axes bur-equipped robot has been designed able to reproduce the milling vectors planned by the software. Software-robot interfacing has been achieved properly matching the stent reference frame and the software and robot coordinate systems. Invasiveness has been avoided achieving the surgical stent from the mucosa-supported radiological mask wax-up. Scattering is ignored because of the surgical stent independency from the bone structure radiography. Production cost has been strongly reduced by avoiding the stereolithographic model. Finally, software-robot interfacing precision has been validated comparing digitally a multi-marker base and its planning transfer. Average position and orientation errors (respectively 0.283 mm ± 0.073 mm and 1.798° ± 0.496°) were significantly better than those achieved using methods based on stereolithography (respectively, 1.45 mm ± 1.42 mm and 7.25° ± 2.67°, with a general best maximum translation discrepancy of about 1.1 mm). This paper describes the last step of a fully 3D approach in which implant planning can be done in a 3D environment, and the correct position, orientation and depth of the planned implants are easily computed and transferred to the surgical phase. Copyright © 2011 John Wiley & Sons, Ltd.

Study and design on USB wireless laser communication system

NASA Astrophysics Data System (ADS)

Wang, Aihua; Zheng, Jiansheng; Ai, Yong

2004-04-01

We give the definition of USB wireless laser communication system (WLCS) and the brief introduction to the protocol of USB, the standard of hardware is also given. The paper analyses the hardware and software of USB WLCS. Wireless laser communication part and USB interface circuit part are discussed in detail. We also give the periphery design of the chip AN2131Q, the control circuit to realize the transformation from parallel port to serial bus, and the circuit of laser sending and receiving of laser communication part, which are simply, cheap and workable. And then the four part of software are analyzed as followed. We have consummated the ISR in the firmware frame to develop the periphery device of USB. We have debugged and consummated the 'ezload,' and the GPD of the drivers. Windows application performs functions and schedules the corresponding API functions to let the interface practical and beautiful. The system can realize USB wireless laser communication between computers, which distance is farther than 50 meters, and top speed can be bigger than 8 Mbps. The system is of great practical sense to resolve the issues of high-speed communication among increasing districts without fiber trunk network.

WebPrInSeS: automated full-length clone sequence identification and verification using high-throughput sequencing data.

PubMed

Massouras, Andreas; Decouttere, Frederik; Hens, Korneel; Deplancke, Bart

2010-07-01

High-throughput sequencing (HTS) is revolutionizing our ability to obtain cheap, fast and reliable sequence information. Many experimental approaches are expected to benefit from the incorporation of such sequencing features in their pipeline. Consequently, software tools that facilitate such an incorporation should be of great interest. In this context, we developed WebPrInSeS, a web server tool allowing automated full-length clone sequence identification and verification using HTS data. WebPrInSeS encompasses two separate software applications. The first is WebPrInSeS-C which performs automated sequence verification of user-defined open-reading frame (ORF) clone libraries. The second is WebPrInSeS-E, which identifies positive hits in cDNA or ORF-based library screening experiments such as yeast one- or two-hybrid assays. Both tools perform de novo assembly using HTS data from any of the three major sequencing platforms. Thus, WebPrInSeS provides a highly integrated, cost-effective and efficient way to sequence-verify or identify clones of interest. WebPrInSeS is available at http://webprinses.epfl.ch/ and is open to all users.

WebPrInSeS: automated full-length clone sequence identification and verification using high-throughput sequencing data

PubMed Central

Massouras, Andreas; Decouttere, Frederik; Hens, Korneel; Deplancke, Bart

2010-01-01

High-throughput sequencing (HTS) is revolutionizing our ability to obtain cheap, fast and reliable sequence information. Many experimental approaches are expected to benefit from the incorporation of such sequencing features in their pipeline. Consequently, software tools that facilitate such an incorporation should be of great interest. In this context, we developed WebPrInSeS, a web server tool allowing automated full-length clone sequence identification and verification using HTS data. WebPrInSeS encompasses two separate software applications. The first is WebPrInSeS-C which performs automated sequence verification of user-defined open-reading frame (ORF) clone libraries. The second is WebPrInSeS-E, which identifies positive hits in cDNA or ORF-based library screening experiments such as yeast one- or two-hybrid assays. Both tools perform de novo assembly using HTS data from any of the three major sequencing platforms. Thus, WebPrInSeS provides a highly integrated, cost-effective and efficient way to sequence-verify or identify clones of interest. WebPrInSeS is available at http://webprinses.epfl.ch/ and is open to all users. PMID:20501601

Wide Area Recovery and Resiliency Program (WARRP) Knowledge Enhancement Events: Damage Assessment Building Abandonment After Action Report

DTIC Science & Technology

2012-04-17

nitrate / Fuel oil (ANFO). The explosive and the shielded CsCl sources are packaged into bombs and loaded onto a truck. The total explosive yield in...Transportation Eric Jacobs State of Colorado Laura Johnston Dewberry Carl Miller Colorado Springs OEM John Miller American Red Cross Matthew...the health effects of the contamination will be. Scenario Terrorist obtain approximately 2,300 curies of 137 Cs (CsCl), and 1.5 tons of Ammonium

Diminishing Manufacturing Sources and Material Shortages: A Guidebook of Best Practices for Implementing a Robust DMSMS Management Program

DTIC Science & Technology

2012-08-01

EOL ) notices or other indicators of potential discontinuance. DMSMS monitoring and surveil- lance should begin as early as possible during the...throughout the duration of the program, when either the program receives a new EOL notice di- rectly, or the output of the program’s predictive tools or...OEM DMSMS mitigation efforts underway • OCM part number • Sources of active manufacturing • Actual or projected EOL • Function (active versus

Implementation of an axisymmetric drop shape apparatus using a Raspberry-Pi single-board computer and a web camera

NASA Astrophysics Data System (ADS)

Carlà, Marcello; Orlando, Antonio

2018-07-01

This paper describes the implementation of an axisymmetric drop shape apparatus for the measurement of surface or interfacial tension of a hanging liquid drop, using only cheap resources like a common web camera and a single-board microcomputer. The mechanics of the apparatus is composed of stubs of commonly available aluminium bar, with all other mechanical parts manufactured with an amateur 3D printer. All of the required software, either for handling the camera and taking the images, or for processing the drop images to get the drop profile and fit it with the Bashforth and Adams equation, is freely available under an open source license. Despite the very limited cost of the whole setup, an extensive test has demonstrated an overall accuracy of ±0.2% or better.

Computationally intensive econometrics using a distributed matrix-programming language.

PubMed

Doornik, Jurgen A; Hendry, David F; Shephard, Neil

2002-06-15

This paper reviews the need for powerful computing facilities in econometrics, focusing on concrete problems which arise in financial economics and in macroeconomics. We argue that the profession is being held back by the lack of easy-to-use generic software which is able to exploit the availability of cheap clusters of distributed computers. Our response is to extend, in a number of directions, the well-known matrix-programming interpreted language Ox developed by the first author. We note three possible levels of extensions: (i) Ox with parallelization explicit in the Ox code; (ii) Ox with a parallelized run-time library; and (iii) Ox with a parallelized interpreter. This paper studies and implements the first case, emphasizing the need for deterministic computing in science. We give examples in the context of financial economics and time-series modelling.

A fast and accurate method to predict 2D and 3D aerodynamic boundary layer flows

NASA Astrophysics Data System (ADS)

Bijleveld, H. A.; Veldman, A. E. P.

2014-12-01

A quasi-simultaneous interaction method is applied to predict 2D and 3D aerodynamic flows. This method is suitable for offshore wind turbine design software as it is a very accurate and computationally reasonably cheap method. This study shows the results for a NACA 0012 airfoil. The two applied solvers converge to the experimental values when the grid is refined. We also show that in separation the eigenvalues remain positive thus avoiding the Goldstein singularity at separation. In 3D we show a flow over a dent in which separation occurs. A rotating flat plat is used to show the applicability of the method for rotating flows. The shown capabilities of the method indicate that the quasi-simultaneous interaction method is suitable for design methods for offshore wind turbine blades.

Surrogate oracles, generalized dependency and simpler models

NASA Technical Reports Server (NTRS)

Wilson, Larry

1990-01-01

Software reliability models require the sequence of interfailure times from the debugging process as input. It was previously illustrated that using data from replicated debugging could greatly improve reliability predictions. However, inexpensive replication of the debugging process requires the existence of a cheap, fast error detector. Laboratory experiments can be designed around a gold version which is used as an oracle or around an n-version error detector. Unfortunately, software developers can not be expected to have an oracle or to bear the expense of n-versions. A generic technique is being investigated for approximating replicated data by using the partially debugged software as a difference detector. It is believed that the failure rate of each fault has significant dependence on the presence or absence of other faults. Thus, in order to discuss a failure rate for a known fault, the presence or absence of each of the other known faults needs to be specified. Also, in simpler models which use shorter input sequences without sacrificing accuracy are of interest. In fact, a possible gain in performance is conjectured. To investigate these propositions, NASA computers running LIC (RTI) versions are used to generate data. This data will be used to label the debugging graph associated with each version. These labeled graphs will be used to test the utility of a surrogate oracle, to analyze the dependent nature of fault failure rates and to explore the feasibility of reliability models which use the data of only the most recent failures.

Digital Core Modelling for Clastic Oil and Gas Reservoir

NASA Astrophysics Data System (ADS)

Belozerov, I.; Berezovsky, V.; Gubaydullin, M.; Yur’ev, A.

2018-05-01

"Digital core" is a multi-purpose tool for solving a variety of tasks in the field of geological exploration and production of hydrocarbons at various stages, designed to improve the accuracy of geological study of subsurface resources, the efficiency of reproduction and use of mineral resources, as well as applying the results obtained in production practice. The actuality of the development of the "Digital core" software is that even a partial replacement of natural laboratory experiments with mathematical modelling can be used in the operative calculation of reserves in exploratory drilling, as well as in the absence of core material from wells. Or impossibility of its research by existing laboratory methods (weakly cemented, loose, etc. rocks). 3D-reconstruction of the core microstructure can be considered as a cheap and least time-consuming method for obtaining petrophysical information about the main filtration-capacitive properties and fluid motion in reservoir rocks.

Comparing the effect of topical application of human milk and dry cord care on umbilical cord separation time in healthy newborn infants.

PubMed

Aghamohammadi, Azar; Zafari, Mandana; Moslemi, Leila

2012-06-01

Comparing the effect of topical human milk application and dry cord care on cord separation time. This research was a randomized clinical trial study on 130 singleton and mature newborns. Newborns were placed randomly in groups of topical application of human milk and dry cord care. The umbilical separation time was compared in the two groups. Data was analyzed by SPSS software. Independent Samples t-Test, χ(2), Fisher were used in this study. Median time of cord separation in human milk application group (150.95±28.68 hours) was significantly shorter than dry cord care group (180.93±37.42 hours) (P<0.001). Topical application of human milk on the remaining part of the cord reduces the cord separation time and it can be used as an easy, cheap and non invasive way for cord care.

A low-power data acquisition system for geomagnetic observatories and variometer stations

NASA Astrophysics Data System (ADS)

Morschhauser, Achim; Haseloff, Jürgen; Bronkalla, Oliver; Müller-Brettschneider, Carsten; Matzka, Jürgen

2017-09-01

A modern geomagnetic observatory must provide data of high stability, continuity, and resolution. The INTERMAGNET network has therefore specified quantitative criteria to ensure a high quality standard of geomagnetic observatories. Here, we present a new data acquisition system which was designed to meet these criteria, in particular with respect to 1 Hz data. This system is based on a Raspberry Pi embedded PC and runs a C+ + data acquisition software. As a result, the data acquisition system is modular, cheap, and flexible, and it can be operated in remote areas with limited power supply. In addition, the system is capable of near-real-time data transmission, using a reverse SSH tunnel to work with any network available. The system hardware was successfully tested at the Niemegk observatory for a period of 1 year and subsequently installed at the Tatuoca observatory in Brazil.

A precise goniometer/tensiometer using a low cost single-board computer

NASA Astrophysics Data System (ADS)

Favier, Benoit; Chamakos, Nikolaos T.; Papathanasiou, Athanasios G.

2017-12-01

Measuring the surface tension and the Young contact angle of a droplet is extremely important for many industrial applications. Here, considering the booming interest for small and cheap but precise experimental instruments, we have constructed a low-cost contact angle goniometer/tensiometer, based on a single-board computer (Raspberry Pi). The device runs an axisymmetric drop shape analysis (ADSA) algorithm written in Python. The code, here named DropToolKit, was developed in-house. We initially present the mathematical framework of our algorithm and then we validate our software tool against other well-established ADSA packages, including the commercial ramé-hart DROPimage Advanced as well as the DropAnalysis plugin in ImageJ. After successfully testing for various combinations of liquids and solid surfaces, we concluded that our prototype device would be highly beneficial for industrial applications as well as for scientific research in wetting phenomena compared to the commercial solutions.

Cheap or Robust? The practical realization of self-driving wheelchair technology.

PubMed

Burhanpurkar, Maya; Labbe, Mathieu; Guan, Charlie; Michaud, Francois; Kelly, Jonathan

2017-07-01

To date, self-driving experimental wheelchair technologies have been either inexpensive or robust, but not both. Yet, in order to achieve real-world acceptance, both qualities are fundamentally essential. We present a unique approach to achieve inexpensive and robust autonomous and semi-autonomous assistive navigation for existing fielded wheelchairs, of which there are approximately 5 million units in Canada and United States alone. Our prototype wheelchair platform is capable of localization and mapping, as well as robust obstacle avoidance, using only a commodity RGB-D sensor and wheel odometry. As a specific example of the navigation capabilities, we focus on the single most common navigation problem: the traversal of narrow doorways in arbitrary environments. The software we have developed is generalizable to corridor following, desk docking, and other navigation tasks that are either extremely difficult or impossible for people with upper-body mobility impairments.

Small, Smart, Fast, and Cheap: Microchip-Based Sensors to Estimate Air Pollution Exposures in Rural Households

PubMed Central

Pillarisetti, Ajay; Allen, Tracy; Ruiz-Mercado, Ilse; Edwards, Rufus; Chowdhury, Zohir; Garland, Charity; Johnson, Michael; Litton, Charles D.; Lam, Nicholas L.; Pennise, David; Smith, Kirk R.

2017-01-01

Over the last 20 years, the Kirk R. Smith research group at the University of California Berkeley—in collaboration with Electronically Monitored Ecosystems, Berkeley Air Monitoring Group, and other academic institutions—has developed a suite of relatively inexpensive, rugged, battery-operated, microchip-based devices to quantify parameters related to household air pollution. These devices include two generations of particle monitors; data-logging temperature sensors to assess time of use of household energy devices; a time-activity monitoring system using ultrasound; and a CO2-based tracer-decay system to assess ventilation rates. Development of each system involved numerous iterations of custom hardware, software, and data processing and visualization routines along with both lab and field validation. The devices have been used in hundreds of studies globally and have greatly enhanced our understanding of heterogeneous household air pollution (HAP) concentrations and exposures and factors influencing them. PMID:28812989

Reviews

NASA Astrophysics Data System (ADS)

2008-05-01

WE RECOMMEND Why the Sky is Blue This book gives an excellent answer to the age-old question Science Magic Book of experiments finds the fun in physics Function Generator Kit Build your own simple wave generator Dent pullers Instead of using them to pull out dents, get your pupils to pull them apart Rocket Tracker Launch and track rockets with this kit Stephen Hawking, A biograpy This book looks at both the science and the personal life of the famous physicist WORTH A LOOK The Universe and the Atom All-encompassing but uninspiring physics book Sizzling Magnets Another cheap toy proves its usefulness in the physics lab Efergy Energy-saving meter is easy to use but may not save you energy Experiments and Demonstrations in Physics This book is full of interesting experiments but skewed to a particular hardware system WEB WATCH Gary Williams recounts the valuable lessons he learned at the Software 4 Skint Schools workshop

In situ synthesis of hydroxyapatite coating by laser cladding.

PubMed

Wang, D G; Chen, C Z; Ma, J; Zhang, G

2008-10-15

HA bioceramic coatings were synthesized on titanium substrate by laser cladding using cheap calcium carbonate and calcium hydrogen phosphate. The thermodynamic condition for synthesizing HA was calculated by software Matlab 5.0, the microstructure and phase analysis of laser clad HA bioceramic coatings were studied by electron probe microanalyser (EPMA), X-ray diffractometer (XRD) and transmission electron microscopy (TEM). The theoretical results show that the Gibbs free enthalpy for the synthesis of HA phase is satisfied, and the presence of HA phase in the clad coatings was then further verified by XRD and the selected area diffraction patterns. When the laser power is 600W and the scanning speed is 3.5mm/s, the compact HA bioceramic coatings were obtained, which have cellular dendritic structure and consist of the phases of HA, alpha-Ca(2)P(2)O(7), CaO and CaTiO(3).

Decoupling of Getting Up Detection Device Using Ultrasonic Radar by Changing Duty Ratio of Transmission Wave

NASA Astrophysics Data System (ADS)

Yamada, Yo; Tanaka, Kanya; Haruyama, Kazuo; Wakasa, Yuji; Akashi, Takuya

The decline in the quality of patient's safety control is a problem, because the number of caretakers is reduced by the acceleration of demographic aging in an elder care facility. Especially, the detection of getting up from the bed is very important for preventing patients from falling and wandering unbreakable. In our previous study, we have developed the getting up detection device with an ultrasonic radar, which is safe, cheap, and break-proof. However, if there are many patients in a ward, it is difficult to use some ultrasonic radars. The reason is that if some ultrasonic radars, which have the same frequency, are used in same ward, the ultrasonic signals are coherent with each other. To solve this problem, we propose a novel incoherent method. This method is achieved by improving the software in the device at a low cost.

Reviews

NASA Astrophysics Data System (ADS)

2008-03-01

WE RECOMMEND Doomsday Men: the Real Dr Strangelove and the Dream of the Superweapon The relationship between scientists and ethics is explored in this fascinating history of superweaponry RAF Real-life Science A CD-ROM that combines physics activities and careers advice Seismology A booklet that covers seismology for the classroom thoroughly Ice, Rock, and Beauty: a Visual Tour of the New Solar System A beautiful book on a beautiful subject Leicester Height Measure A surprisingly multipurpose piece of equipment Learning Science Teaching: Developing a Professional Knowledge Base A study of how to become an expert science teacher Nova 5000EX A tablet PC ready-loaded with all of the software you need Seismometer Modelling Kit A useful and cheap demonstration of seismology Vibration Detector Basic equipment for measuring vibrations is very welcome Seismometer System This more advanced seismology kit is worth the price-tag WEB WATCH Gary Williams trawls the net for Earth science classroom aids

Small, Smart, Fast, and Cheap: Microchip-Based Sensors to Estimate Air Pollution Exposures in Rural Households.

PubMed

Pillarisetti, Ajay; Allen, Tracy; Ruiz-Mercado, Ilse; Edwards, Rufus; Chowdhury, Zohir; Garland, Charity; Hill, L Drew; Johnson, Michael; Litton, Charles D; Lam, Nicholas L; Pennise, David; Smith, Kirk R

2017-08-16

Over the last 20 years, the Kirk R. Smith research group at the University of California Berkeley-in collaboration with Electronically Monitored Ecosystems, Berkeley Air Monitoring Group, and other academic institutions-has developed a suite of relatively inexpensive, rugged, battery-operated, microchip-based devices to quantify parameters related to household air pollution. These devices include two generations of particle monitors; data-logging temperature sensors to assess time of use of household energy devices; a time-activity monitoring system using ultrasound; and a CO₂-based tracer-decay system to assess ventilation rates. Development of each system involved numerous iterations of custom hardware, software, and data processing and visualization routines along with both lab and field validation. The devices have been used in hundreds of studies globally and have greatly enhanced our understanding of heterogeneous household air pollution (HAP) concentrations and exposures and factors influencing them.

GPU Particle Tracking and MHD Simulations with Greatly Enhanced Computational Speed

NASA Astrophysics Data System (ADS)

Ziemba, T.; O'Donnell, D.; Carscadden, J.; Cash, M.; Winglee, R.; Harnett, E.

2008-12-01

GPUs are intrinsically highly parallelized systems that provide more than an order of magnitude computing speed over a CPU based systems, for less cost than a high end-workstation. Recent advancements in GPU technologies allow for full IEEE float specifications with performance up to several hundred GFLOPs per GPU, and new software architectures have recently become available to ease the transition from graphics based to scientific applications. This allows for a cheap alternative to standard supercomputing methods and should increase the time to discovery. 3-D particle tracking and MHD codes have been developed using NVIDIA's CUDA and have demonstrated speed up of nearly a factor of 20 over equivalent CPU versions of the codes. Such a speed up enables new applications to develop, including real time running of radiation belt simulations and real time running of global magnetospheric simulations, both of which could provide important space weather prediction tools.

Identifying fMRI Model Violations with Lagrange Multiplier Tests

PubMed Central

Cassidy, Ben; Long, Christopher J; Rae, Caroline; Solo, Victor

2013-01-01

The standard modeling framework in Functional Magnetic Resonance Imaging (fMRI) is predicated on assumptions of linearity, time invariance and stationarity. These assumptions are rarely checked because doing so requires specialised software, although failure to do so can lead to bias and mistaken inference. Identifying model violations is an essential but largely neglected step in standard fMRI data analysis. Using Lagrange Multiplier testing methods we have developed simple and efficient procedures for detecting model violations such as non-linearity, non-stationarity and validity of the common Double Gamma specification for hemodynamic response. These procedures are computationally cheap and can easily be added to a conventional analysis. The test statistic is calculated at each voxel and displayed as a spatial anomaly map which shows regions where a model is violated. The methodology is illustrated with a large number of real data examples. PMID:22542665

Analysis of Circadian Leaf Movements.

PubMed

Müller, Niels A; Jiménez-Gómez, José M

2016-01-01

The circadian clock is a molecular timekeeper that controls a wide variety of biological processes. In plants, clock outputs range from the molecular level, with rhythmic gene expression and metabolite content, to physiological processes such as stomatal conductance or leaf movements. Any of these outputs can be used as markers to monitor the state of the circadian clock. In the model plant Arabidopsis thaliana, much of the current knowledge about the clock has been gained from time course experiments profiling expression of endogenous genes or reporter constructs regulated by the circadian clock. Since these methods require labor-intensive sample preparation or transformation, monitoring leaf movements is an interesting alternative, especially in non-model species and for natural variation studies. Technological improvements both in digital photography and image analysis allow cheap and easy monitoring of circadian leaf movements. In this chapter we present a protocol that uses an autonomous point and shoot camera and free software to monitor circadian leaf movements in tomato.

Cost Reduction Through the Use of Additive Manufacturing (3d Printing) and Collaborative Product Life Cycle Management Technologies to Enhance the Navy’s Maintenance Programs

DTIC Science & Technology

2013-09-01

the order from the DLA; convenes a meeting with tech librarians , engineers, machinists, quality assurance (QA) inspectors, and mechanics to assess...created, begins the in-house process. 3. Research of Technical Drawings The tech librarian reviews the applicable repository for any tech drawings...applicable to Widget A. If none are found, the tech librarian contacts the OEM and other D-Level activities to find out whether the tech drawing is out

Evaluation of Recommended Improvements to the Family Housing Self-Help Program

DTIC Science & Technology

1987-09-01

FY96 EST. EST. TASK LABOR TASK LABOR :OOPL. COST COMPL. COST ITM OCCURRENCES TIME AVCIDED OCCJRFENCES TIME AVOIDED FRACkE T, C 0 I 1 150 WIRE, FABRIC...InSuLatinq blankets on hot water heater AS i. ;Ieed radiator RG Si. identify 3no report suspected gas *;eaks RU FO 6). qelll~t pi~ot lights RU RU 101 A1...VII Corps ATTN: German Liaison Off icer ATTN: DEN (15) ATTN: Water Resources Support Ctr 21s, Support Command ATTN: Engr Studies Center ATTN: OEM (12

Offset-electrode profile acquisition strategy for electrical resistivity tomography

NASA Astrophysics Data System (ADS)

Robbins, Austin R.; Plattner, Alain

2018-04-01

We present an electrode layout strategy that allows electrical resistivity profiles to image the third dimension close to the profile plane. This "offset-electrode profile" approach involves laterally displacing electrodes away from the profile line in an alternating fashion and then inverting the resulting data using three-dimensional electrical resistivity tomography software. In our synthetic and field surveys, the offset-electrode method succeeds in revealing three-dimensional structures in the vicinity of the profile plane, which we could not achieve using three-dimensional inversions of linear profiles. We confirm and explain the limits of linear electrode profiles through a discussion of the three-dimensional sensitivity patterns: For a homogeneous starting model together with a linear electrode layout, all sensitivities remain symmetric with respect to the profile plane through each inversion step. This limitation can be overcome with offset-electrode layouts by breaking the symmetry pattern among the sensitivities. Thanks to freely available powerful three-dimensional resistivity tomography software and cheap modern computing power, the requirement for full three-dimensional calculations does not create a significant burden and renders the offset-electrode approach a cost-effective method. By offsetting the electrodes in an alternating pattern, as opposed to laying the profile out in a U-shape, we minimize shortening the profile length.

Process model economics of xanthan production from confectionery industry wastewaters.

PubMed

Bajić, Bojana Ž; Vučurović, Damjan G; Dodić, Siniša N; Grahovac, Jovana A; Dodić, Jelena M

2017-12-01

In this research a process and cost model for a xanthan production facility was developed using process simulation software (SuperPro Designer ® ). This work represents a novelty in the field for two reasons. One is that xanthan gum has been produced from several wastes but never from wastewaters from confectionery industries. The other more important is that the aforementioned software, which in intended exclusively for bioprocesses, is used for generating a base case, i.e. starting point for transferring the technology to industrial scales. Previously acquired experimental knowledge about using confectionery wastewaters from five different factories as substitutes for commercially used cultivation medium have been incorporated into the process model in order to obtain an economic viability of implementing such substrates. A lower initial sugar content in the medium based on wastewater (28.41 g/L) compared to the synthetic medium (30.00 g/L) gave a lower xanthan content at the end of cultivation (23.98 and 26.27 g/L, respectively). Although this resulted in somewhat poorer economic parameters, they were still in the range of being an investment of interest. Also the possibility of utilizing a cheap resource (waste) and reducing pollution that would result from its disposal has a positive effect on the environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

D Cultural Heritage Documentation: a Comparison Between Different Photogrammetric Software and Their Products

NASA Astrophysics Data System (ADS)

Gagliolo, S.; Ausonio, E.; Federici, B.; Ferrando, I.; Passoni, D.; Sguerso, D.

2018-05-01

The conservation of Cultural Heritage depends on the availability of means and resources and, consequently, on the possibility to make effective operations of data acquisition. In facts, on the one hand the creation of data repositories allows the description of the present state-of-art, in order to preserve the testimonial value and to permit the fruition. On the other hand, data acquisition grants a metrical knowledge, which is particularly useful for a direct restoration of the surveyed objects, through the analysis of their 3D digital models. In the last decades, the continuous increase and improvement of 3D survey techniques and of tools for the geometric and digital data management have represented a great support to the development of documentary activities. In particular, Photogrammetry is a survey technique highly appropriate in the creation of data repositories in the field of Cultural Heritage, thanks to its advantages of cheapness, flexibility, speed, and the opportunity to ensure the operators' safety in hazardous areas too. In order to obtain a complete documentation, the high precision of the on-site operations must be coupled with an effective post-processing phase. Hence, a comparison among some of the photogrammetric software currently available was performed by the authors, with a particular attention to the workflow completeness and the final products quality.

Using hacked point and shoot cameras for time-lapse snow cover monitoring in an Alpine valley

NASA Astrophysics Data System (ADS)

Weijs, S. V.; Diebold, M.; Mutzner, R.; Golay, J. R.; Parlange, M. B.

2012-04-01

In Alpine environments, monitoring snow cover is essential get insight in the hydrological processes and water balance. Although measurement techniques based on LIDAR are available, their cost is often a restricting factor. In this research, an experiment was done using a distributed array of cheap consumer cameras to get insight in the spatio-temporal evolution of snowpack. Two experiments are planned. The first involves the measurement of eolic snow transport around a hill, to validate a snow saltation model. The second monitors the snowmelt during the melting season, which can then be combined with data from a wireless network of meteorological stations and discharge measurements at the outlet of the catchment. The poster describes the hardware and software setup, based on an external timer circuit and CHDK, the Canon Hack Development Kit. This latter is a flexible and developing software package, released under a GPL license. It was developed by hackers that reverse engineered the firmware of the camera and added extra functionality such as raw image output, more full control of the camera, external trigger and motion detection, and scripting. These features make it a great tool for geosciences. Possible other applications involve aerial stereo photography, monitoring vegetation response. We are interested in sharing experiences and brainstorming about new applications. Bring your camera!

Cognitive software defined radar: waveform design for clutter and interference suppression

NASA Astrophysics Data System (ADS)

Kirk, Benjamin H.; Owen, Jonathan W.; Narayanan, Ram M.; Blunt, Shannon D.; Martone, Anthony F.; Sherbondy, Kelly D.

2017-05-01

Clutter and radio frequency interference (RFI) are prevalent issues in the field of radar and are specifically of interest to of cognitive radar. Here, methods for applying and testing the utility of cognitive radar for clutter and RFI mitigation are explored. Using the adaptable transmit capability, environmental database, and general "awareness" of a cognitive radar system (i.e. spectrum sensing, geographical location, etc.), a matched waveform is synthesized that improves the signal-to-clutter ratio (SCR), assuming at least an estimate of the target response and the environmental clutter response are known a prior i. RFI may also be mitigated by sensing the RF spectrum and adapting the transmit center frequency and bandwidth using methods that optimize bandwidth and signal-to-interference plus noise ratio (SINR) (i.e. the spectrum sensing, multi-objective (SS-MO) algorithm). The improvement is shown by a decrease in the noise floor. The above methods' effectiveness are examined via a test-bed developed around a software defined radio (SDR). Testing and the general use of commercial off the shelf (COTS) devices are desirable for their cost effectiveness, general ease of use, as well as technical and community support, but these devices provide design challenges in order to be effective. The universal software radio peripheral (USRP) X310 SDR is a relatively cheap and portable device that has all the system components of a basic cognitive radar. Design challenges of the SDR include phase coherency between channels, bandwidth limitations, dynamic range, and speed of computation and data communication / recording.

Tuning Electrochemical Properties of Li-Rich Layered Oxide Cathodes by Adjusting Co/Ni Ratios and Mechanism Investigation Using in situ X-ray Diffraction and Online Continuous Flow Differential Electrochemical Mass Spectrometry.

PubMed

Shen, ShouYu; Hong, YuHao; Zhu, FuChun; Cao, ZhenMing; Li, YuYang; Ke, FuSheng; Fan, JingJing; Zhou, LiLi; Wu, LiNa; Dai, Peng; Cai, MingZhi; Huang, Ling; Zhou, ZhiYou; Li, JunTao; Wu, QiHui; Sun, ShiGang

2018-04-18

Owing to high specific capacity of ∼250 mA h g -1 , lithium-rich layered oxide cathode materials (Li 1+ x Ni y Co z Mn (3- x-2 y-3 z)/4 O 2 ) have been considered as one of the most promising candidates for the next-generation cathode materials of lithium ion batteries. However, the commercialization of this kind of cathode materials seriously restricted by voltage decay upon cycling though Li-rich materials with high cobalt content have been widely studied and show good capacity. This research successfully suppresses voltage decay upon cycling while maintaining high specific capacity with low Co/Ni ratio in Li-rich cathode materials. Online continuous flow differential electrochemical mass spectrometry (OEMS) and in situ X-ray diffraction (XRD) techniques have been applied to investigate the structure transformation of Li-rich layered oxide materials during charge-discharge process. The results of OEMS revealed that low Co/Ni ratio lithium-rich layered oxide cathode materials released no lattice oxygen at the first charge process, which will lead to the suppression of the voltage decay upon cycling. The in situ XRD results displayed the structure transition of lithium-rich layered oxide cathode materials during the charge-discharge process. The Li 1.13 Ni 0.275 Mn 0.580 O 2 cathode material exhibited a high initial medium discharge voltage of 3.710 and a 3.586 V medium discharge voltage with the lower voltage decay of 0.124 V after 100 cycles.

A comparison of approaches to mitigate hypothetical bias

Treesearch

Patricia A. Champ; Rebecca Moore; Richard C. Bishop

2009-01-01

We compare two approaches to mitigating hypothetical bias. The study design includes three treatments: an actual payment treatment, a contingent valuation (CV) treatment with a followup certainty question, and a CV treatment with a cheap talk script. Our results suggest that both the follow-up certainty treatment and the cheap talk treatment produce...

Theory-Driven Hints in the Cheap Necklace Problem: A Preliminary Investigation

ERIC Educational Resources Information Center

Chu, Yun; Dewald, Andrew D.; Chronicle, Edward P.

2007-01-01

Three experiments investigated the effects of two hints derived from the Criterion for Satisfactory Progress theory (CSP) and Representational Change Theory (RCT) on the cheap necklace problem (insight problem). In Experiment 1, fewer participants given the CSP hint used an incorrect (maximizing) first move than participants given the RCT hint or…

A robust preference for cheap-and-easy strategies over reliable strategies when verifying personal memories.

PubMed

Nash, Robert A; Wade, Kimberley A; Garry, Maryanne; Adelman, James S

2017-08-01

People depend on various sources of information when trying to verify their autobiographical memories. Yet recent research shows that people prefer to use cheap-and-easy verification strategies, even when these strategies are not reliable. We examined the robustness of this cheap strategy bias, with scenarios designed to encourage greater emphasis on source reliability. In three experiments, subjects described real (Experiments 1 and 2) or hypothetical (Experiment 3) autobiographical events, and proposed strategies they might use to verify their memories of those events. Subjects also rated the reliability, cost, and the likelihood that they would use each strategy. In line with previous work, we found that the preference for cheap information held when people described how they would verify childhood or recent memories (Experiment 1), personally important or trivial memories (Experiment 2), and even when the consequences of relying on incorrect information could be significant (Experiment 3). Taken together, our findings fit with an account of source monitoring in which the tendency to trust one's own autobiographical memories can discourage people from systematically testing or accepting strong disconfirmatory evidence.

Google Searches for "Cheap Cigarettes" Spike at Tax Increases: Evidence from an Algorithm to Detect Spikes in Time Series Data.

PubMed

Caputi, Theodore L

2018-05-03

Online cigarette dealers have lower prices than brick-and-mortar retailers and advertise tax-free status.1-8 Previous studies show smokers search out these online alternatives at the time of a cigarette tax increase.9,10 However, these studies rely upon researchers' decision to consider a specific date and preclude the possibility that researchers focus on the wrong date. The purpose of this study is to introduce an unbiased methodology to the field of observing search patterns and to use this methodology to determine whether smokers search Google for "cheap cigarettes" at cigarette tax increases and, if so, whether the increased level of searches persists. Publicly available data from Google Trends is used to observe standardized search volumes for the term, "cheap cigarettes". Seasonal Hybrid Extreme Studentized Deviate and E-Divisive with Means tests were performed to observe spikes and mean level shifts in search volume. Of the twelve cigarette tax increases studied, ten showed spikes in searches for "cheap cigarettes" within two weeks of the tax increase. However, the mean level shifts did not occur for any cigarette tax increase. Searches for "cheap cigarettes" spike around the time of a cigarette tax increase, but the mean level of searches does not shift in response to a tax increase. The SHESD and EDM tests are unbiased methodologies that can be used to identify spikes and mean level shifts in time series data without an a priori date to be studied. SHESD and EDM affirm spikes in interest are related to tax increases. • Applies improved statistical techniques (SHESD and EDM) to Google search data related to cigarettes, reducing bias and increasing power • Contributes to the body of evidence that state and federal tax increases are associated with spikes in searches for cheap cigarettes and may be good dates for increased online health messaging related to tobacco.

A Very Short, Fairly Interesting and Reasonably Cheap Book about Qualitative Research. Very Short, Fairly Interesting & Reasonably Cheap Books

ERIC Educational Resources Information Center

Silverman, David

2007-01-01

In this book, the author shows how good research can be methodologically inventive, empirically rigorous, theoretically-alive and practically relevant. Using materials ranging from photographs to novels and newspaper stories this book demonstrates that getting to grips with these issues means asking fundamental questions about how we are…

Econometric Models of U.S. Navy Career Petty Officer Retention.

DTIC Science & Technology

1981-06-01

PF AD-AL04 076 NAVAL POSTGRADUATE SCHOOL MONTEREY CA F/6 5/9 ECONO ETRIC MODELS OF U.S. NAVY CAREER PETTY OFFICER RETENTION.(Ul JUN 81 J J B PKO...THESIS D . ECONOMETRIC MODELS OF U. S. NAVY CAREER PETTY OFFICER RETENTION SML Vby John Joseph Bepko III June 1981 Thesis Advisor: George W. Thomas...DOCUMENTATION PACE 33703 coTu~rwc oEm 0419PsR 01N1911VT*48~ &GM01 1𔃻. 411CIP1SIMYS CATALOG IulmSIS Econometric Models of U. S. Navy Career Petty 1’ t h s s j

150 {mu}A 18F{sup -} target and beam port upgrade for the IBA 18/9 cyclotron

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stokely, M. H.; Peeples, J. L.; Poorman, M. C.

2012-12-19

A high power ({approx}3 kW) target platform has been developed for the IBA 18/9 cyclotron. New designs for the airlock, collimator and target subsystems have been fabricated and deployed. The primary project goal is reliable commercial production of 18F{sup -} at 150 {mu}A or greater, while secondary goals include improving serviceability and extending service intervals relative to OEM systems. Reliable operation in a production environment has been observed at beam currents up to 140 {mu}A. Challenges include ion source lifetime and localized peaking in the beam intensity distribution.

Detection and Control of Insects in Stored Food. Part I. The Effect of Pheromone-Baited Traps and Their Placement on the Number of Trogoderma Species Captured

DTIC Science & Technology

1983-01-01

PART I - THE EFFECT OF PHEROMONE -BAITED TRAP Technical Report AND THEIR PLACEMENT ON THE NUMBER OF 6. PERFORMING ORO. REPORT NUMBER TROGODE RMA SPECI...Madison, WI 1 L162724AH99BE006 I. CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT CATS Food Packaging & Processing Group Jan 83 Food Engineering...on reveree Wd It noM*967 am Idm~fft Ay block sember) INSECTS TRAPS PHEROMONES DETECTION TROGODE RMA 21ASMTIRACT (ftdwm ow w a oem’ cid I Ity by bl..A

My School Makes Me Sick: Cheap Solutions to Environmental Problems in Schools.

ERIC Educational Resources Information Center

Wiley, Robert

This paper presents 19 solutions to problems within the school environment: (1) ventilation (e.g., keep the thermostat fan on whenever the room is occupied); (2) filters (e.g., get rid of 20 percent cheap filters); (3) clean the ductwork; (4) avoid car and bus fumes by keeping vehicles 50 feet from the building; (5) sewer vents (vents must…

Good, Fast, Cheap: How Centers of Teaching and Learning Can Capitalize in Today's Resource-Constrained Context

ERIC Educational Resources Information Center

Truong, Michael H.; Juillerat, Stephanie; Gin, Deborah H. C.

2016-01-01

This article provides leaders and educational developers of Centers for Teaching and Learning (CTL) with innovative and practical strategies on how to increase their centers' capacity and impact by focusing on quality, efficiency, and cost. This "good, fast, cheap" model represents a promising way that CTL can continue to grow, scale,…

Reducing user error in dipstick urinalysis with a low-cost slipping manifold and mobile phone platform (Conference Presentation)

NASA Astrophysics Data System (ADS)

Smith, Gennifer T.; Dwork, Nicholas; Khan, Saara A.; Millet, Matthew; Magar, Kiran; Javanmard, Mehdi; Bowden, Audrey K.

2017-03-01

Urinalysis dipsticks were designed to revolutionize urine-based medical diagnosis. They are cheap, extremely portable, and have multiple assays patterned on a single platform. They were also meant to be incredibly easy to use. Unfortunately, there are many aspects in both the preparation and the analysis of the dipsticks that are plagued by user error. This high error is one reason that dipsticks have failed to flourish in both the at-home market and in low-resource settings. Sources of error include: inaccurate volume deposition, varying lighting conditions, inconsistent timing measurements, and misinterpreted color comparisons. We introduce a novel manifold and companion software for dipstick urinalysis that eliminates the aforementioned error sources. A micro-volume slipping manifold ensures precise sample delivery, an opaque acrylic box guarantees consistent lighting conditions, a simple sticker-based timing mechanism maintains accurate timing, and custom software that processes video data captured by a mobile phone ensures proper color comparisons. We show that the results obtained with the proposed device are as accurate and consistent as a properly executed dip-and-wipe method, the industry gold-standard, suggesting the potential for this strategy to enable confident urinalysis testing. Furthermore, the proposed all-acrylic slipping manifold is reusable and low in cost, making it a potential solution for at-home users and low-resource settings.

Compact multispectral photodiode arrays using micropatterned dichroic filters

NASA Astrophysics Data System (ADS)

Chandler, Eric V.; Fish, David E.

2014-05-01

The next generation of multispectral instruments requires significant improvements in both spectral band customization and portability to support the widespread deployment of application-specific optical sensors. The benefits of spectroscopy are well established for numerous applications including biomedical instrumentation, industrial sorting and sensing, chemical detection, and environmental monitoring. In this paper, spectroscopic (and by extension hyperspectral) and multispectral measurements are considered. The technology, tradeoffs, and application fits of each are evaluated. In the majority of applications, monitoring 4-8 targeted spectral bands of optimized wavelength and bandwidth provides the necessary spectral contrast and correlation. An innovative approach integrates precision spectral filters at the photodetector level to enable smaller sensors, simplify optical designs, and reduce device integration costs. This method supports user-defined spectral bands to create application-specific sensors in a small footprint with scalable cost efficiencies. A range of design configurations, filter options and combinations are presented together with typical applications ranging from basic multi-band detection to stringent multi-channel fluorescence measurement. An example implementation packages 8 narrowband silicon photodiodes into a 9x9mm ceramic LCC (leadless chip carrier) footprint. This package is designed for multispectral applications ranging from portable color monitors to purpose- built OEM industrial and scientific instruments. Use of an eight-channel multispectral photodiode array typically eliminates 10-20 components from a device bill-of-materials (BOM), streamlining the optical path and shrinking the footprint by 50% or more. A stepwise design approach for multispectral sensors is discussed - including spectral band definition, optical design tradeoffs and constraints, and device integration from prototype through scalable volume production. Additional customization options are explored for application-specific OEM sensors integrated into portable devices using multispectral photodiode arrays.

Estimating Energy Consumption of Mobile Fluid Power in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynch, Lauren; Zigler, Bradley T.

This report estimates the market size and energy consumption of mobile off-road applications utilizing hydraulic fluid power, and summarizes technology gaps and implementation barriers. Mobile fluid power is the use of hydraulic fluids under pressure to transmit power in mobile equipment applications. The mobile off-road fluid power sector includes various uses of hydraulic fluid power equipment with fundamentally diverse end-use application and operational requirements, such as a skid steer loader, a wheel loader or an agriculture tractor. The agriculture and construction segments dominate the mobile off-road fluid power market in component unit sales volume. An estimated range of energy consumedmore » by the mobile off-road fluid power sector is 0.36 - 1.8 quads per year, which was 1.3 percent - 6.5 percent of the total energy consumed in 2016 by the transportation sector. Opportunities for efficiency improvements within the fluid power system result from needs to level and reduce the peak system load requirements and develop new technologies to reduce fluid power system level losses, both of which may be facilitated by characterizing duty cycles to define standardized performance test methods. There are currently no commonly accepted standardized test methods for evaluating equipment level efficiency over a duty cycle. The off-road transportation sector currently meets criteria emissions requirements, and there are no efficiency regulations requiring original equipment manufacturers (OEM) to invest in new architecture development to improve the fuel economy of mobile off-road fluid power systems. In addition, the end-user efficiency interests are outweighed by low equipment purchase or lease price concerns, required payback periods, and reliability and durability requirements of new architecture. Current economics, low market volumes with high product diversity, and regulation compliance challenge OEM investment in commercialization of new architecture development.« less

Simulation methods supporting homologation of Electronic Stability Control in vehicle variants

NASA Astrophysics Data System (ADS)

Lutz, Albert; Schick, Bernhard; Holzmann, Henning; Kochem, Michael; Meyer-Tuve, Harald; Lange, Olav; Mao, Yiqin; Tosolin, Guido

2017-10-01

Vehicle simulation has a long tradition in the automotive industry as a powerful supplement to physical vehicle testing. In the field of Electronic Stability Control (ESC) system, the simulation process has been well established to support the ESC development and application by suppliers and Original Equipment Manufacturers (OEMs). The latest regulation of the United Nations Economic Commission for Europe UN/ECE-R 13 allows also for simulation-based homologation. This extends the usage of simulation from ESC development to homologation. This paper gives an overview of simulation methods, as well as processes and tools used for the homologation of ESC in vehicle variants. The paper first describes the generic homologation process according to the European Regulation (UN/ECE-R 13H, UN/ECE-R 13/11) and U.S. Federal Motor Vehicle Safety Standard (FMVSS 126). Subsequently the ESC system is explained as well as the generic application and release process at the supplier and OEM side. Coming up with the simulation methods, the ESC development and application process needs to be adapted for the virtual vehicles. The simulation environment, consisting of vehicle model, ESC model and simulation platform, is explained in detail with some exemplary use-cases. In the final section, examples of simulation-based ESC homologation in vehicle variants are shown for passenger cars, light trucks, heavy trucks and trailers. This paper is targeted to give a state-of-the-art account of the simulation methods supporting the homologation of ESC systems in vehicle variants. However, the described approach and the lessons learned can be used as reference in future for an extended usage of simulation-supported releases of the ESC system up to the development and release of driver assistance systems.

UAV-borne lidar with MEMS mirror-based scanning capability

NASA Astrophysics Data System (ADS)

Kasturi, Abhishek; Milanovic, Veljko; Atwood, Bryan H.; Yang, James

2016-05-01

Firstly, we demonstrated a wirelessly controlled MEMS scan module with imaging and laser tracking capability which can be mounted and flown on a small UAV quadcopter. The MEMS scan module was reduced down to a small volume of <90mm x 60mm x 40mm, weighing less than 40g and consuming less than 750mW of power using a ~5mW laser. This MEMS scan module was controlled by a smartphone via Bluetooth while flying on a drone, and could project vector content, text, and perform laser based tracking. Also, a "point-and-range" LiDAR module was developed for UAV applications based on low SWaP (Size, Weight and Power) gimbal-less MEMS mirror beam-steering technology and off-the-shelf OEM LRF modules. For demonstration purposes of an integrated laser range finder module, we used a simple off-the-shelf OEM laser range finder (LRF) with a 100m range, +/-1.5mm accuracy, and 4Hz ranging capability. The LRFs receiver optics were modified to accept 20° of angle, matching the transmitter's FoR. A relatively large (5.0mm) diameter MEMS mirror with +/-10° optical scanning angle was utilized in the demonstration to maintain the small beam divergence of the module. The complete LiDAR prototype can fit into a small volume of <70mm x 60mm x 60mm, and weigh <50g when powered by the UAV's battery. The MEMS mirror based LiDAR system allows for ondemand ranging of points or areas within the FoR without altering the UAV's position. Increasing the LRF ranging frequency and stabilizing the pointing of the laser beam by utilizing the onboard inertial sensors and the camera are additional goals of the next design.

Depth of manual dismantling analysis: A cost–benefit approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Achillas, Ch., E-mail: c.achillas@ihu.edu.gr; Aidonis, D.; Vlachokostas, Ch.

Highlights: ► A mathematical modeling tool for OEMs. ► The tool can be used by OEMs, recyclers of electr(on)ic equipment or WEEE management systems’ regulators. ► The tool makes use of cost–benefit analysis in order to determine the optimal depth of product disassembly. ► The reusable materials and the quantity of metals and plastics recycled can be quantified in an easy-to-comprehend manner. - Abstract: This paper presents a decision support tool for manufacturers and recyclers towards end-of-life strategies for waste electrical and electronic equipment. A mathematical formulation based on the cost benefit analysis concept is herein analytically described in ordermore » to determine the parts and/or components of an obsolete product that should be either non-destructively recovered for reuse or be recycled. The framework optimally determines the depth of disassembly for a given product, taking into account economic considerations. On this basis, it embeds all relevant cost elements to be included in the decision-making process, such as recovered materials and (depreciated) parts/components, labor costs, energy consumption, equipment depreciation, quality control and warehousing. This tool can be part of the strategic decision-making process in order to maximize profitability or minimize end-of-life management costs. A case study to demonstrate the models’ applicability is presented for a typical electronic product in terms of structure and material composition. Taking into account the market values of the pilot product’s components, the manual disassembly is proven profitable with the marginal revenues from recovered reusable materials to be estimated at 2.93–23.06 €, depending on the level of disassembly.« less

Relationship between plethysmographic waveform changes and hemodynamic variables in anesthetized, mechanically ventilated patients undergoing continuous cardiac output monitoring.

PubMed

Thiele, Robert H; Colquhoun, Douglas A; Patrie, James; Nie, Sarah H; Huffmyer, Julie L

2011-12-01

To assess the relation between photoplethysmographically-derived parameters and invasively-determined hemodynamic variables. After induction of anesthesia and placement of a Swan-Ganz CCOmbo catheter, a Nonin OEM III probe was placed on each patient's earlobe. Photoplethysmographic signals were recorded in conjunction with cardiac output. Photoplethysmographic metrics (amplitude of absorbance waveform, maximal slope of absorbance waveform, area under the curve, and width) were calculated offline and compared with invasively determined hemodynamic variables. Subject-specific associations between each dependent and independent variable pair were summarized on a per-subject basis by the nonparametric Spearman rank correlation coefficient. The bias-corrected accelerated bootstrap resampling procedure of Efron and Tibshirani was used to obtain a 95% confidence interval for the median subject-specific correlation coefficient, and Wilcoxon sign-rank tests were conducted to test the null hypothesis that the median of the subject-specific correlation coefficients were equal to 0. University hospital. Eighteen patients undergoing coronary artery bypass graft surgery. Placement of a Swan-Ganz CCOmbo catheter and a Nonin OEM III pulse oximetry probe. There was a positive, statistically significant correlation between stroke volume and width (median correlation coefficient, 0.29; confidence interval, 0.01-0.46; p = 0.034). The concordance between changes in stroke volume and changes in width was 53%. No other correlations achieved statistical significance. This study was unable to reproduce the results of prior studies. Only stroke volume and photoplethysmographic width were correlated in this study; however, the correlation and concordance (based on analysis of a 4-quadrant plot) were too weak to be clinically useful. Future studies in patients undergoing low-to-moderate risk surgery may result in improved correlations and clinical utility. Copyright © 2011 Elsevier Inc. All rights reserved.

Thiourea in the Construction of C-S Bonds as Part of an Undergraduate Organic Chemistry Laboratory Course

ERIC Educational Resources Information Center

Lu, Guo-ping; Chen, Fei; Cai, Chun

2017-01-01

The nucleophilic aromatic substitution reaction and thia-Michael addition using thiourea as an odorless, cheap, and easy-to-handle sulfur source in water are described, which can be used to teach upper-division undergraduates the role of thiourea in the formation of C-S bonds and the principles of green chemistry. The use of a cheap, nontoxic…

Conversion of microalgae to jet fuel: process design and simulation.

PubMed

Wang, Hui-Yuan; Bluck, David; Van Wie, Bernard J

2014-09-01

Microalgae's aquatic, non-edible, highly genetically modifiable nature and fast growth rate are considered ideal for biomass conversion to liquid fuels providing promise for future shortages in fossil fuels and for reducing greenhouse gas and pollutant emissions from combustion. We demonstrate adaptability of PRO/II software by simulating a microalgae photo-bio-reactor and thermolysis with fixed conversion isothermal reactors adding a heat exchanger for thermolysis. We model a cooling tower and gas floatation with zero-duty flash drums adding solids removal for floatation. Properties data are from PRO/II's thermodynamic data manager. Hydrotreating is analyzed within PRO/II's case study option, made subject to Jet B fuel constraints, and we determine an optimal 6.8% bioleum bypass ratio, 230°C hydrotreater temperature, and 20:1 bottoms to overhead distillation ratio. Process economic feasibility occurs if cheap CO2, H2O and nutrient resources are available, along with solar energy and energy from byproduct combustion, and hydrotreater H2 from product reforming. Copyright © 2014 Elsevier Ltd. All rights reserved.

A secure data outsourcing scheme based on Asmuth-Bloom secret sharing

NASA Astrophysics Data System (ADS)

Idris Muhammad, Yusuf; Kaiiali, Mustafa; Habbal, Adib; Wazan, A. S.; Sani Ilyasu, Auwal

2016-11-01

Data outsourcing is an emerging paradigm for data management in which a database is provided as a service by third-party service providers. One of the major benefits of offering database as a service is to provide organisations, which are unable to purchase expensive hardware and software to host their databases, with efficient data storage accessible online at a cheap rate. Despite that, several issues of data confidentiality, integrity, availability and efficient indexing of users' queries at the server side have to be addressed in the data outsourcing paradigm. Service providers have to guarantee that their clients' data are secured against internal (insider) and external attacks. This paper briefly analyses the existing indexing schemes in data outsourcing and highlights their advantages and disadvantages. Then, this paper proposes a secure data outsourcing scheme based on Asmuth-Bloom secret sharing which tries to address the issues in data outsourcing such as data confidentiality, availability and order preservation for efficient indexing.

SeqBox: RNAseq/ChIPseq reproducible analysis on a consumer game computer.

PubMed

Beccuti, Marco; Cordero, Francesca; Arigoni, Maddalena; Panero, Riccardo; Amparore, Elvio G; Donatelli, Susanna; Calogero, Raffaele A

2018-03-01

Short reads sequencing technology has been used for more than a decade now. However, the analysis of RNAseq and ChIPseq data is still computational demanding and the simple access to raw data does not guarantee results reproducibility between laboratories. To address these two aspects, we developed SeqBox, a cheap, efficient and reproducible RNAseq/ChIPseq hardware/software solution based on NUC6I7KYK mini-PC (an Intel consumer game computer with a fast processor and a high performance SSD disk), and Docker container platform. In SeqBox the analysis of RNAseq and ChIPseq data is supported by a friendly GUI. This allows access to fast and reproducible analysis also to scientists with/without scripting experience. Docker container images, docker4seq package and the GUI are available at http://www.bioinformatica.unito.it/reproducibile.bioinformatics.html. beccuti@di.unito.it. Supplementary data are available at Bioinformatics online. © The Author(s) 2017. Published by Oxford University Press.

Virtual reality treatment versus exposure in vivo: a comparative evaluation in acrophobia.

PubMed

Emmelkamp, P M G; Krijn, M; Hulsbosch, A M; de Vries, S; Schuemie, M J; van der Mast, C A P G

2002-05-01

The aim of the present study was to evaluate the effectiveness of low-budget virtual reality (VR) exposure versus exposure in vivo in a between-group design in 33 patients suffering from acrophobia. The virtual environments used in treatment were exactly copied from the real environments used in the exposure in vivo program. VR exposure was found to be as effective as exposure in vivo on anxiety and avoidance as measured with the Acrophobia Questionnaire (AQ), the Attitude Towards Heights Questionnaire (ATHQ) and the Behavioral Avoidance Test (BAT). Results were maintained up to six months follow-up. The present study shows that VR exposure can be effective with relatively cheap hardware and software on stand-alone computers currently on the market. Further studies into the effectiveness of VR exposure are recommended in other clinical groups as agoraphobics and social phobics and studies in which VR exposure is compared with more emerging virtual worlds as presented in CAVE-type systems.

A digital waveguide-based approach for Clavinet modeling and synthesis

NASA Astrophysics Data System (ADS)

Gabrielli, Leonardo; Välimäki, Vesa; Penttinen, Henri; Squartini, Stefano; Bilbao, Stefan

2013-12-01

The Clavinet is an electromechanical musical instrument produced in the mid-twentieth century. As is the case for other vintage instruments, it is subject to aging and requires great effort to be maintained or restored. This paper reports analyses conducted on a Hohner Clavinet D6 and proposes a computational model to faithfully reproduce the Clavinet sound in real time, from tone generation to the emulation of the electronic components. The string excitation signal model is physically inspired and represents a cheap solution in terms of both computational resources and especially memory requirements (compared, e.g., to sample playback systems). Pickups and amplifier models have been implemented which enhance the natural character of the sound with respect to previous work. A model has been implemented on a real-time software platform, Pure Data, capable of a 10-voice polyphony with low latency on an embedded device. Finally, subjective listening tests conducted using the current model are compared to previous tests showing slightly improved results.

Attaching IBM-compatible 3380 disks to Cray X-MP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engert, D.E.; Midlock, J.L.

1989-01-01

A method of attaching IBM-compatible 3380 disks directly to a Cray X-MP via the XIOP with a BMC is described. The IBM 3380 disks appear to the UNICOS operating system as DD-29 disks with UNICOS file systems. IBM 3380 disks provide cheap, reliable large capacity disk storage. Combined with a small number of high-speed Cray disks, the IBM disks provide for the bulk of the storage for small files and infrequently used files. Cray Research designed the BMC and its supporting software in the XIOP to allow IBM tapes and other devices to be attached to the X-MP. No hardwaremore » changes were necessary, and we added less than 2000 lines of code to the XIOP to accomplish this project. This system has been in operation for over eight months. Future enhancements such as the use of a cache controller and attachment to a Y-MP are also described. 1 tab.« less

A gimbal platform stabilization for topographic applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michele, Mangiameli, E-mail: michele.mangiameli@dica.unict.it; Giuseppe, Mussumeci

2015-03-10

The aim of this work is the stabilization of a Gimbal platform for optical sensors acquisitions in topographic applications using mobile vehicles. The stabilization of the line of sight (LOS) consists in tracking the command velocity in presence of nonlinear noise due to the external environment. The hardware architecture is characterized by an Ardupilot platform that allows the control of both the mobile device and the Gimbal. Here we developed a new approach to stabilize the Gimbal platform, which is based on neural network. For the control system, we considered a plant that represents the transfer function of the servomore » system control model for an inertial stabilized Gimbal platform. The transductor used in the feed-back line control is characterized by the Rate Gyro transfer function installed onboard of Ardupilot. For the simulation and investigation of the system performance, we used the Simulink tool of Matlab. Results show that the hardware/software approach is efficient, reliable and cheap for direct photogrammetry, as well as for general purpose applications using mobile vehicles.« less

A portable low-cost 3D point cloud acquiring method based on structure light

NASA Astrophysics Data System (ADS)

Gui, Li; Zheng, Shunyi; Huang, Xia; Zhao, Like; Ma, Hao; Ge, Chao; Tang, Qiuxia

2018-03-01

A fast and low-cost method of acquiring 3D point cloud data is proposed in this paper, which can solve the problems of lack of texture information and low efficiency of acquiring point cloud data with only one pair of cheap cameras and projector. Firstly, we put forward a scene adaptive design method of random encoding pattern, that is, a coding pattern is projected onto the target surface in order to form texture information, which is favorable for image matching. Subsequently, we design an efficient dense matching algorithm that fits the projected texture. After the optimization of global algorithm and multi-kernel parallel development with the fusion of hardware and software, a fast acquisition system of point-cloud data is accomplished. Through the evaluation of point cloud accuracy, the results show that point cloud acquired by the method proposed in this paper has higher precision. What`s more, the scanning speed meets the demand of dynamic occasion and has better practical application value.

Genome Sequence of Lactobacillus rhamnosus Strain CASL, an Efficient l-Lactic Acid Producer from Cheap Substrate Cassava

PubMed Central

Yu, Bo; Su, Fei; Wang, Limin; Zhao, Bo; Qin, Jiayang; Ma, Cuiqing; Xu, Ping; Ma, Yanhe

2011-01-01

Lactobacillus rhamnosus is a type of probiotic bacteria with industrial potential for l-lactic acid production. We announce the draft genome sequence of L. rhamnosus CASL (2,855,156 bp with a G+C content of 46.6%), which is an efficient producer of l-lactic acid from cheap, nonfood substrate cassava with a high production titer. PMID:22123765

Genuine Onion: Simple, Fast, Flexible, and Cheap Website Authentication

DTIC Science & Technology

2015-05-21

Genuine onion : Simple, Fast, Flexible, and Cheap Website Authentication Paul Syverson U.S. Naval Research Laboratory paul.syverson@nrl.navy.mil...access to Internet websites. Tor is also used to access sites on the . onion virtual domain. The focus of . onion use and discussion has traditionally... onion system can be used to provide an entirely separate benefit: basic website authentication. We also argue that not only can onionsites provide

Application of statistical experimental design for optimisation of bioinsecticides production by sporeless Bacillus thuringiensis strain on cheap medium.

PubMed

Ben Khedher, Saoussen; Jaoua, Samir; Zouari, Nabil

2013-01-01

In order to overproduce bioinsecticides production by a sporeless Bacillus thuringiensis strain, an optimal composition of a cheap medium was defined using a response surface methodology. In a first step, a Plackett-Burman design used to evaluate the effects of eight medium components on delta-endotoxin production showed that starch, soya bean and sodium chloride exhibited significant effects on bioinsecticides production. In a second step, these parameters were selected for further optimisation by central composite design. The obtained results revealed that the optimum culture medium for delta-endotoxin production consists of 30 g L(-1) starch, 30 g L(-1) soya bean and 9 g L(-1) sodium chloride. When compared to the basal production medium, an improvement in delta-endotoxin production up to 50% was noted. Moreover, relative toxin yield of sporeless Bacillus thuringiensis S22 was improved markedly by using optimised cheap medium (148.5 mg delta-endotoxins per g starch) when compared to the yield obtained in the basal medium (94.46 mg delta-endotoxins per g starch). Therefore, the use of optimised culture cheap medium appeared to be a good alternative for a low cost production of sporeless Bacillus thuringiensis bioinsecticides at industrial scale which is of great importance in practical point of view.

Application of statistical experimental design for optimisation of bioinsecticides production by sporeless Bacillus thuringiensis strain on cheap medium

PubMed Central

Ben Khedher, Saoussen; Jaoua, Samir; Zouari, Nabil

2013-01-01

In order to overproduce bioinsecticides production by a sporeless Bacillus thuringiensis strain, an optimal composition of a cheap medium was defined using a response surface methodology. In a first step, a Plackett-Burman design used to evaluate the effects of eight medium components on delta-endotoxin production showed that starch, soya bean and sodium chloride exhibited significant effects on bioinsecticides production. In a second step, these parameters were selected for further optimisation by central composite design. The obtained results revealed that the optimum culture medium for delta-endotoxin production consists of 30 g L−1 starch, 30 g L−1 soya bean and 9 g L−1 sodium chloride. When compared to the basal production medium, an improvement in delta-endotoxin production up to 50% was noted. Moreover, relative toxin yield of sporeless Bacillus thuringiensis S22 was improved markedly by using optimised cheap medium (148.5 mg delta-endotoxins per g starch) when compared to the yield obtained in the basal medium (94.46 mg delta-endotoxins per g starch). Therefore, the use of optimised culture cheap medium appeared to be a good alternative for a low cost production of sporeless Bacillus thuringiensis bioinsecticides at industrial scale which is of great importance in practical point of view. PMID:24516462

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, K.; Gonzales, J.

Many fleet managers have opted to incorporate alternative fuels and advanced vehicles into their lineup. Original equipment manufacturers (OEMs) offer a variety of choices, and there are additional options offered by aftermarket companies. There are also a myriad of ways that existing vehicles can be modified to utilize alternative fuels and other advanced technologies. Vehicle conversions and retrofit packages, along with engine repower options, can offer an ideal way to lower vehicle operating costs. This can result in long term return on investment, in addition to helping fleet managers achieve emissions and environmental goals. This report summarizes the various factorsmore » to consider when pursuing a conversion, retrofit, or repower option.« less

Thermoelectric Waste Heat Recovery Program for Passenger Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jovovic, Vladimir

2015-12-31

Gentherm began work in October 2011 to develop a Thermoelectric Waste Energy Recovery System for passenger vehicle applications. Partners in this program were BMW and Tenneco. Tenneco, in the role of TIER 1 supplier, developed the system-level packaging of the thermoelectric power generator. As the OEM, BMW Group demonstrated the TEG system in their vehicle in the final program phase. Gentherm demonstrated the performance of the TEG in medium duty and heavy duty vehicles. Technology developed and demonstrated in this program showed potential to reduce fuel consumption in medium and heavy duty vehicles. In light duty vehicles it showed moremore » modest potential.« less

Research & Development of Materials/Processing Methods for Continuous Fiber Ceramic Composites (CFCC) Phase 2 Final Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szweda, A.

2001-01-01

The Department of Energy's Continuous Fiber Ceramic Composites (CFCC) Initiative that begun in 1992 has led the way for Industry, Academia, and Government to carry out a 10 year R&D plan to develop CFCCs for these industrial applications. In Phase II of this program, Dow Corning has led a team of OEM's, composite fabricators, and Government Laboratories to develop polymer derived CFCC materials and processes for selected industrial applications. During this phase, Dow Corning carried extensive process development and representative component demonstration activities on gas turbine components, chemical pump components and heat treatment furnace components.

Economic Drivers of Strategic & Critical Materials

DTIC Science & Technology

2012-05-01

Calla<la. r>eru, cnre ZINC 7J ----i Can.ad:J, Peru, Mexico, l relaniJ TIT .. .Nll.JM (&p1111ge) ’i">9 -----j K azaUI&tan. Japan. ~ R~a ~.0:!\\JM Ml N...G YPS’Uloil PHOSPI1AT E ROCK IRON and STEEL IRON and STE EL SlAG OEME:NT PUMICE DIIL\\IO.N !> (na:lr.ll t1du&trtal s!Oile) U:ME STO.N E (Ct...PLATINUM ZINC TU.NGSTE.N mA.~w.l ($f10nge) HICK EL PEAT MAGNESIUM METAL SltVER S t’UCON BERYLUUM MAGNESIUM COMPOU l>S ALUMI NUM PUMICIE

DESDynI Lidar for Solid Earth Applications

NASA Technical Reports Server (NTRS)

Sauber, Jeanne; Hofton, Michelle; Bruhn, Ronald; Lutchke, Scott; Blair, Bryan

2011-01-01

As part of the NASA's DESDynI mission, global elevation profiles from contiguous 25 m footprint Lidar measurements will be made. Here we present results of a performance simulation of a single pass of the multi-beam Lidar instrument over uplifted marine terraces in southern Alaska. The significance of the Lidar simulations is that surface topography would be captured at sufficient resolution for mapping uplifted terraces features but it will be hard to discern I-2m topographic change over features less than tens of meters in width. Since Lidar would penetrate most vegetation, the accurate bald Earth elevation profiles will give new elevation information beyond the standard 30-m OEM.

Magnesium Finishing for OEM and Overhaul

DTIC Science & Technology

2011-02-01

Dow 9, created in the 1940’s Chrome Manganese, created in the 1940’s Anodize Coatings Used Most Commonly for New Build Dow 17, created 1942 HAE...old castings are still  serviceable • By selecting Tagnite the Air Force was able to  eliminate  hexavalent  chromium and attain corrosion...good  and are still serviceable  • By selecting Tagnite, the Air Force was able to  eliminate  hexavalent  chromium and attain corrosion  resistance

Tackling alcohol misuse: purchasing patterns affected by minimum pricing for alcohol.

PubMed

Ludbrook, Anne; Petrie, Dennis; McKenzie, Lynda; Farrar, Shelley

2012-01-01

Alcohol consumption is associated with a range of health and social harms that increase with the level of consumption. Policy makers are interested in effective and cost-effective interventions to reduce alcohol consumption and associated harms. Economic theory and research evidence demonstrate that increasing price is effective at the population level. Price interventions that target heavier consumers of alcohol may be more effective at reducing alcohol-related harms with less impact on moderate consumers. Minimum pricing per unit of alcohol has been proposed on this basis but concerns have been expressed that 'moderate drinkers of modest means' will be unfairly penalized. If those on low incomes are disproportionately affected by a policy that removes very cheap alcohol from the market, the policy could be regressive. The effect on households' budgets will depend on who currently purchases cheaper products and the extent to which the resulting changes in prices will impact on their demand for alcohol. This paper focuses on the first of these points. This paper aims to identify patterns of purchasing of cheap off-trade alcohol products, focusing on income and the level of all alcohol purchased. Three years (2006-08) of UK household survey data were used. The Expenditure and Food Survey provides comprehensive 2-week data on household expenditure. Regression analyses were used to investigate the relationships between the purchase of cheap off-trade alcohol, household income levels and whether the household level of alcohol purchasing is categorized as moderate, hazardous or harmful, while controlling for other household and non-household characteristics. Predicted probabilities and quantities for cheap alcohol purchasing patterns were generated for all households. The descriptive statistics and regression analyses indicate that low-income households are not the predominant purchasers of any alcohol or even of cheap alcohol. Of those who do purchase off-trade alcohol, the lowest income households are the most likely to purchase cheap alcohol. However, when combined with the fact that the lowest income households are the least likely to purchase any off-trade alcohol, they have the lowest probability of purchasing cheap off-trade alcohol at the population level. Moderate purchasing households in all income quintiles are the group predicted as least likely to purchase cheap alcohol. The predicted average quantity of low-cost off-trade alcohol reveals similar patterns. The results suggest that heavier household purchasers of alcohol are most likely to be affected by the introduction of a 'minimum price per unit of alcohol' policy. When we focus only on those households that purchase off-trade alcohol, lower income households are the most likely to be affected. However, minimum pricing in the UK is unlikely to be significantly regressive when the effects are considered for the whole population, including those households that do not purchase any off-trade alcohol. Minimum pricing will affect the minority of low-income households that purchase off-trade alcohol and, within this group, those most likely to be affected are households purchasing at a harmful level.

How architecture wins technology wars.

PubMed

Morris, C R; Ferguson, C H

1993-01-01

Signs of revolutionary transformation in the global computer industry are everywhere. A roll call of the major industry players reads like a waiting list in the emergency room. The usual explanations for the industry's turmoil are at best inadequate. Scale, friendly government policies, manufacturing capabilities, a strong position in desktop markets, excellent software, top design skills--none of these is sufficient, either by itself or in combination, to ensure competitive success in information technology. A new paradigm is required to explain patterns of success and failure. Simply stated, success flows to the company that manages to establish proprietary architectural control over a broad, fast-moving, competitive space. Architectural strategies have become crucial to information technology because of the astonishing rate of improvement in microprocessors and other semiconductor components. Since no single vendor can keep pace with the outpouring of cheap, powerful, mass-produced components, customers insist on stitching together their own local systems solutions. Architectures impose order on the system and make the interconnections possible. The architectural controller is the company that controls the standard by which the entire information package is assembled. Microsoft's Windows is an excellent example of this. Because of the popularity of Windows, companies like Lotus must conform their software to its parameters in order to compete for market share. In the 1990s, proprietary architectural control is not only possible but indispensable to competitive success. What's more, it has broader implications for organizational structure: architectural competition is giving rise to a new form of business organization.

[A design of simple ventilator control system based on LabVIEW].

PubMed

Pei, Baoqing; Xu, Shengwei; Li, Hui; Li, Deyu; Pei, Yidong; He, Haixing

2011-01-01

This paper designed a ventilator control system to control proportional valves and motors. It used LabVIEW to control the object mentioned above and design ,validate, evaluate arithmetic, and establish hardware in loop platform. There are two system' s hierarchies. The high layer was used to run non-real time program and the low layer was used to run real time program. The two layers communicated through TCP/IP net. The program can be divided into several modules, which can be expanded and maintained easily. And the harvest in the prototype designing can be seamlessly used to embedded products. From all above, this system was useful in employing OEM products.

Evaluating alternative service contracts for medical equipment.

PubMed

De Vivo, L; Derrico, P; Tomaiuolo, D; Capussotto, C; Reali, A

2004-01-01

Managing medical equipments is a formidable task that has to be pursued maximizing the benefits within a highly regulated and cost-constrained environment. Clinical engineers are uniquely equipped to determine which policies are the most efficacious and cost effective for a health care institution to ensure that medical devices meet appropriate standards of safety, quality and performance. Part of this support is a strategy for preventive and corrective maintenance. This paper describes an alternative scheme of OEM (Original Equipment Manufacturer) service contract for medical equipment that combines manufacturers' technical support and in-house maintenance. An efficient and efficacious organization can reduce the high cost of medical equipment maintenance while raising reliability and quality. Methodology and results are discussed.

Consumer Behavior and the Plug-In Electric Vehicle Purchase Decision Process: A Research Synthesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, Margaret; Fujita, K. Sydney

This report synthesizes consumer behavior research as it pertains to the plug-in electric vehicle (PEV) purchase decision process. The purpose is to clarify what is known about the vital role consumers play in the U.S. PEV market as it matures to become less policy-reliant and more representative of the U.S., both spatially and demographically. A more representative PEV market will: help OEMs recoup more of their R&D investments in PEVs; help American consumers access the economic and performance benefits of PEVs; and help the U.S. become more energy independent while improving air quality-related public health and reducing greenhouse gas emissions.

The price had better be right: women's reactions to sexual stimuli vary with market factors.

PubMed

Vohs, Kathleen D; Sengupta, Jaideep; Dahl, Darren W

2014-01-01

Two experiments tested when and why women's typically negative, spontaneous reactions to sexual imagery would soften. Sexual economics theory predicts that women want sex to be seen as rare and special. We reasoned that this outlook would translate to women tolerating sexual images more when those images are linked to high worth as opposed to low worth. We manipulated whether an ad promoted an expensive or a cheap product using a sexually charged or a neutral scene. As predicted, women found sexual imagery distasteful when it was used to promote a cheap product, but this reaction to sexual imagery was mitigated if the product promoted was expensive. This pattern was not observed among men. Furthermore, we predicted and found that sexual ads promoting cheap products heightened feelings of being upset and angry among women. These findings suggest that women's reactions to sexual images can reveal deep-seated preferences about how sex should be used and understood.

Just Say No to Carbon Emissions (LBNL Science at the Theater)

ScienceCinema

Ramesh, Ramamoorthy; Zhou, Nan; Oldenburg, Curt

2018-06-15

Learn about three efforts our grandchildren may thank us for: cheap solar energy, bringing energy efficiency to China, and learning how to store carbon deep underground. Can solar energy be dirt cheap? We're all potentially billionaires when it comes to solar energy. The trick is learning how to convert sunlight to electricity using cheap and plentiful materials. Ramamoorthy Ramesh, an innovative materials scientist at Berkeley Lab, will discuss how he and other researchers are working to make photovoltaic cells using the most abundant elements in the Earth's crust -- materials that are literally as common as dirt. Energy efficiency in China: Nan Zhou is a researcher with Berkeley Labs China Energy Group. She will speak about Chinas energy use and the policies that have been implemented to increase energy efficiency and reduce CO2 emission growth. Her work focuses on building China's capacity to evaluate, adopt and implement low-carbon development strategies. Zhou has an architecture degree from China, and a Master and Ph.D. in Engineering from Japan. Understanding geologic carbon sequestration: Even with continued growth of renewable energy sources such as wind and solar, fossil fuels will likely remain cheap and plentiful for decades to come. Geologist Curt Oldenburg, who heads Berkeley Lab's Geologic Carbon Sequestration Program, will discuss a strategy to reduce carbon emissions from coal and natural gas. It involves pumping compressed CO2 captured from large stationary sources into underground rock formations that can store it for geological time scales.

Just Say No to Carbon Emissions (LBNL Science at the Theater)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramesh, Ramamoorthy; Zhou, Nan; Oldenburg, Curt

2010-04-26

Learn about three efforts our grandchildren may thank us for: cheap solar energy, bringing energy efficiency to China, and learning how to store carbon deep underground. Can solar energy be dirt cheap? We're all potentially billionaires when it comes to solar energy. The trick is learning how to convert sunlight to electricity using cheap and plentiful materials. Ramamoorthy Ramesh, an innovative materials scientist at Berkeley Lab, will discuss how he and other researchers are working to make photovoltaic cells using the most abundant elements in the Earth's crust -- materials that are literally as common as dirt. Energy efficiency inmore » China: Nan Zhou is a researcher with Berkeley Labs China Energy Group. She will speak about Chinas energy use and the policies that have been implemented to increase energy efficiency and reduce CO2 emission growth. Her work focuses on building China's capacity to evaluate, adopt and implement low-carbon development strategies. Zhou has an architecture degree from China, and a Master and Ph.D. in Engineering from Japan. Understanding geologic carbon sequestration: Even with continued growth of renewable energy sources such as wind and solar, fossil fuels will likely remain cheap and plentiful for decades to come. Geologist Curt Oldenburg, who heads Berkeley Lab's Geologic Carbon Sequestration Program, will discuss a strategy to reduce carbon emissions from coal and natural gas. It involves pumping compressed CO2 captured from large stationary sources into underground rock formations that can store it for geological time scales.« less

Design of an integrated sensor system for the detection of traces of different molecules in the air

NASA Astrophysics Data System (ADS)

Strle, D.; Muševič, I.

2015-04-01

This article presents the design of a miniature detection system and its associated signal processing electronics, which can detect and selectively recognize vapor traces of different materials in the air - including explosives. It is based on the array of surface-functionalized COMB capacitive sensors and extremely low noise, analog, integrated electronic circuit, hardwired digital signal processing hardware and additional software running on a PC. The instrument is sensitive and selective, consumes a minimum amount of energy, is very small (few mm3) and cheap to produce in large quantities, and is insensitive to mechanical influences. Using an electronic detection system built of low noise analog front-end and hard-wired digital signal processing, it is possible to detect less than 0.3ppt of TNT molecules in the atmosphere (3 TNT molecules in 1013 molecules of the air) at 25°C on a 1 Hz bandwidth using very small volume and approx. 10 mA current from a 5V supply voltage. The sensors are implemented in a modified MEMS process and analog electronics in 0.18 um CMOS technology.

CFD Simulation On The Pressure Distribution For An Isolated Single-Story House With Extension: Grid Sensitivity Analysis

NASA Astrophysics Data System (ADS)

Yahya, W. N. W.; Zaini, S. S.; Ismail, M. A.; Majid, T. A.; Deraman, S. N. C.; Abdullah, J.

2018-04-01

Damage due to wind-related disasters is increasing due to global climate change. Many studies have been conducted to study the wind effect surrounding low-rise building using wind tunnel tests or numerical simulations. The use of numerical simulation is relatively cheap but requires very good command in handling the software, acquiring the correct input parameters and obtaining the optimum grid or mesh. However, before a study can be conducted, a grid sensitivity test must be conducted to get a suitable cell number for the final to ensure an accurate result with lesser computing time. This study demonstrates the numerical procedures for conducting a grid sensitivity analysis using five models with different grid schemes. The pressure coefficients (CP) were observed along the wall and roof profile and compared between the models. The results showed that medium grid scheme can be used and able to produce high accuracy results compared to finer grid scheme as the difference in terms of the CP values was found to be insignificant.

EUV mask manufacturing readiness in the merchant mask industry

NASA Astrophysics Data System (ADS)

Green, Michael; Choi, Yohan; Ham, Young; Kamberian, Henry; Progler, Chris; Tseng, Shih-En; Chiou, Tsann-Bim; Miyazaki, Junji; Lammers, Ad; Chen, Alek

2017-10-01

As nodes progress into the 7nm and below regime, extreme ultraviolet lithography (EUVL) becomes critical for all industry participants interested in remaining at the leading edge. One key cost driver for EUV in the supply chain is the reflective EUV mask. As of today, the relatively few end users of EUV consist primarily of integrated device manufactures (IDMs) and foundries that have internal (captive) mask manufacturing capability. At the same time, strong and early participation in EUV by the merchant mask industry should bring value to these chip makers, aiding the wide-scale adoption of EUV in the future. For this, merchants need access to high quality, representative test vehicles to develop and validate their own processes. This business circumstance provides the motivation for merchants to form Joint Development Partnerships (JDPs) with IDMs, foundries, Original Equipment Manufacturers (OEMs) and other members of the EUV supplier ecosystem that leverage complementary strengths. In this paper, we will show how, through a collaborative supplier JDP model between a merchant and OEM, a novel, test chip driven strategy is applied to guide and validate mask level process development. We demonstrate how an EUV test vehicle (TV) is generated for mask process characterization in advance of receiving chip maker-specific designs. We utilize the TV to carry out mask process "stress testing" to define process boundary conditions which can be used to create Mask Rule Check (MRC) rules as well as serve as baseline conditions for future process improvement. We utilize Advanced Mask Characterization (AMC) techniques to understand process capability on designs of varying complexity that include EUV OPC models with and without sub-resolution assist features (SRAFs). Through these collaborations, we demonstrate ways to develop EUV processes and reduce implementation risks for eventual mass production. By reducing these risks, we hope to expand access to EUV mask capability for the broadest community possible as the technology is implemented first within and then beyond the initial early adopters.

Development and Deployment of an Aerospace Recommended Practice (ARP) Compliant Measurement System for nvPM Certification Measurements of Aircraft Engines - Current Status.

NASA Astrophysics Data System (ADS)

Whitefield, P. D.; Hagen, D. E.; Lobo, P.; Miake-Lye, R. C.

2015-12-01

The Society of Automotive Engineers (SAE) Aircraft Exhaust Emissions Measurement Committee (E-31) has published an Aerospace Information Report (AIR) 6241 detailing the sampling system for the measurement of non-volatile particulate matter (nvPM) from aircraft engines (SAE 2013). The system is designed to operate in parallel with existing International Civil Aviation Organization (ICAO) Annex 16 compliant combustion gas sampling systems used for emissions certification from aircraft engines captured by conventional (Annex 16) gas sampling rakes (ICAO, 2008). The SAE E-31 committee is also working to ballot an Aerospace Recommended Practice (ARP) that will provide the methodology and system specification to measure nvPM from aircraft engines. The ARP is currently in preparation and is expected to be ready for ballot in 2015. A prototype AIR-compliant nvPM measurement system - The North American Reference System (NARS) has been built and evaluated at the MSTCOE under the joint sponsorship of the FAA, EPA and Transport Canada. It has been used to validate the performance characteristics of OEM AIR-compliant systems and is being used in engine certification type testing at OEM facilities to obtain data from a set of representative engines in the fleet. The data collected during these tests will be used by ICAO/CAEP/WG3/PMTG to develop a metric on which on the regulation for nvPM emissions will be based. This paper will review the salient features of the NARS including: (1) emissions sample transport from probe tip to the key diagnostic tools, (2) the mass and number-based diagnostic tools for nvPM mass and number concentration measurement and (3) methods employed to assess the extent of nvPM loss throughout the sampling system. This paper will conclude with a discussion of the recent results from inter-comparison studies conducted with other US - based systems that gives credence to the ARP's readiness for ballot.

A New Understanding for the Rain Rate retrieval of Attenuating Radars Measurement

NASA Astrophysics Data System (ADS)

Koner, P.; Battaglia, A.; Simmer, C.

2009-04-01

The retrieval of rain rate from the attenuated radar (e.g. Cloud Profiling Radar on board of CloudSAT in orbit since June 2006) is a challenging problem. ĹEcuyer and Stephens [1] underlined this difficulty (for rain rates larger than 1.5 mm/h) and suggested the need of additional information (like path-integrated attenuations (PIA) derived from surface reference techniques or precipitation water path estimated from co-located passive microwave radiometer) to constrain the retrieval. It is generally discussed based on the optimal estimation theory that there are no solutions without constraining the problem in a case of visible attenuation because there is no enough information content to solve the problem. However, when the problem is constrained by the additional measurement of PIA, there is a reasonable solution. This raises the spontaneous question: Is all information enclosed in this additional measurement? This also contradicts with the information theory because one measurement can introduce only one degree of freedom in the retrieval. Why is one degree of freedom so important in the above problem? This question cannot be explained using the estimation and information theories of OEM. On the other hand, Koner and Drummond [2] argued that the OEM is basically a regularization method, where a-priori covariance is used as a stabilizer and the regularization strength is determined by the choices of the a-priori and error covariance matrices. The regularization is required for the reduction of the condition number of Jacobian, which drives the noise injection from the measurement and inversion spaces to the state space in an ill-posed inversion. In this work, the above mentioned question will be discussed based on the regularization theory, error mitigation and eigenvalue mathematics. References 1. L'Ecuyer TS and Stephens G. An estimation based precipitation retrieval algorithm for attenuating radar. J. Appl. Met., 2002, 41, 272-85. 2. Koner PK, Drummond JR. A comparison of regularization techniques for atmospheric trace gases retrievals. JQSRT 2008; 109:514-26.

Variable Valve Actuation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey Gutterman; A. J. Lasley

2008-08-31

Many approaches exist to enable advanced mode, low temperature combustion systems for diesel engines - such as premixed charge compression ignition (PCCI), Homogeneous Charge Compression Ignition (HCCI) or other HCCI-like combustion modes. The fuel properties and the quantity, distribution and temperature profile of air, fuel and residual fraction in the cylinder can have a marked effect on the heat release rate and combustion phasing. Figure 1 shows that a systems approach is required for HCCI-like combustion. While the exact requirements remain unclear (and will vary depending on fuel, engine size and application), some form of substantially variable valve actuation ismore » a likely element in such a system. Variable valve actuation, for both intake and exhaust valve events, is a potent tool for controlling the parameters that are critical to HCCI-like combustion and expanding its operational range. Additionally, VVA can be used to optimize the combustion process as well as exhaust temperatures and impact the after treatment system requirements and its associated cost. Delphi Corporation has major manufacturing and product development and applied R&D expertise in the valve train area. Historical R&D experience includes the development of fully variable electro-hydraulic valve train on research engines as well as several generations of mechanical VVA for gasoline systems. This experience has enabled us to evaluate various implementations and determine the strengths and weaknesses of each. While a fully variable electro-hydraulic valve train system might be the 'ideal' solution technically for maximum flexibility in the timing and control of the valve events, its complexity, associated costs, and high power consumption make its implementation on low cost high volume applications unlikely. Conversely, a simple mechanical system might be a low cost solution but not deliver the flexibility required for HCCI operation. After modeling more than 200 variations of the mechanism it was determined that the single cam design did not have enough flexibility to satisfy three critical OEM requirements simultaneously, (maximum valve lift variation, intake valve opening timing and valve closing duration), and a new approach would be necessary. After numerous internal design reviews including several with the OEM a dual cam design was developed that had the flexibility to meet all motion requirements. The second cam added complexity to the mechanism however the cost was offset by the deletion of the electric motor required in the previous design. New patent applications including detailed drawings and potential valve motion profiles were generated and alternate two cam designs were proposed and evaluated for function, cost, reliability and durability. Hardware was designed and built and testing of sample hardware was successfully completed on an engine test stand. The mechanism developed during the course of this investigation can be applied by Original Equipment Manufacturers, (OEM), to their advanced diesel engines with the ultimate goal of reducing emissions and improving fuel economy. The objectives are: (1) Develop an optimal, cost effective, variable valve actuation (VVA) system for advanced low temperature diesel combustion processes. (2) Design and model alternative mechanical approaches and down-select for optimum design. (3) Build and demonstrate a mechanism capable of application on running engines.« less

Quick, easy, cheap, effective, rugged, and safe sample preparation approach for pesticide residue analysis using traditional detectors in chromatography: A review.

PubMed

Rahman, Md Musfiqur; Abd El-Aty, A M; Kim, Sung-Woo; Shin, Sung Chul; Shin, Ho-Chul; Shim, Jae-Han

2017-01-01

In pesticide residue analysis, relatively low-sensitivity traditional detectors, such as UV, diode array, electron-capture, flame photometric, and nitrogen-phosphorus detectors, have been used following classical sample preparation (liquid-liquid extraction and open glass column cleanup); however, the extraction method is laborious, time-consuming, and requires large volumes of toxic organic solvents. A quick, easy, cheap, effective, rugged, and safe method was introduced in 2003 and coupled with selective and sensitive mass detectors to overcome the aforementioned drawbacks. Compared to traditional detectors, mass spectrometers are still far more expensive and not available in most modestly equipped laboratories, owing to maintenance and cost-related issues. Even available, traditional detectors are still being used for analysis of residues in agricultural commodities. It is widely known that the quick, easy, cheap, effective, rugged, and safe method is incompatible with conventional detectors owing to matrix complexity and low sensitivity. Therefore, modifications using column/cartridge-based solid-phase extraction instead of dispersive solid-phase extraction for cleanup have been applied in most cases to compensate and enable the adaptation of the extraction method to conventional detectors. In gas chromatography, the matrix enhancement effect of some analytes has been observed, which lowers the limit of detection and, therefore, enables gas chromatography to be compatible with the quick, easy, cheap, effective, rugged, and safe extraction method. For liquid chromatography with a UV detector, a combination of column/cartridge-based solid-phase extraction and dispersive solid-phase extraction was found to reduce the matrix interference and increase the sensitivity. A suitable double-layer column/cartridge-based solid-phase extraction might be the perfect solution, instead of a time-consuming combination of column/cartridge-based solid-phase extraction and dispersive solid-phase extraction. Therefore, replacing dispersive solid-phase extraction with column/cartridge-based solid-phase extraction in the cleanup step can make the quick, easy, cheap, effective, rugged, and safe extraction method compatible with traditional detectors for more sensitive, effective, and green analysis. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Microbial diversity and prevalence of foodborne pathogens in cheap and junk foods consumed by primary schoolchildren.

PubMed

Kim, M J; Kim, S A; Kang, Y S; Hwang, I G; Rhee, M S

2013-07-01

Aerobic plate counts (APC), coliforms, Bacillus cereus, Escherichia coli and eight foodborne pathogens were tested in 1008 cheap and junk foods, including candies, dried cakes, chewing gum, chocolate, dried and seasoned seafood, ice cream, and sugary foods. APCs were positive for 342 samples (33·9%), and the majority of the counts were 2-3 log CFU g(-1) or ml(-1) (average: 1·10 log CFU g(-1) or ml(-1) ). Most samples (97·3%) contained no coliforms (average: 0·07 log CFU g(-1) or ml(-1) ). Bacillus cereus was detected in 68 samples (average: 0·14 log CFU g(-1) or ml(-1) ). Escherichia coli and Listeria monocytogenes were detected in 6 and 1 samples, respectively, whereas other foodborne pathogens were not isolated. The highest bacterial counts were associated with dried and seasoned seafood products and dried cakes, suggesting that appropriate regulations of these food types should be considered. Cheap and junk foods were produced mainly in developing countries, but there were no significant differences in the bacterial counts among different countries of origin. The presence of foodborne pathogens may pose a risk for children. These results suggest that there is cause for deeper concern about the safety of these foods and that effective countermeasures should be established to improve their microbiological safety. Food safety is especially important for children, but only limited information is available about the microbiological quality of cheap and junk foods that are consumed frequently by primary schoolchildren (e.g. dried cakes, candies and chocolates). The present study investigated the microbial quality of cheap and junk foods, and our results indicate that these foods are a potential health risk for children, therefore, deeper concern about the safety of these foods and effective countermeasures should be established to improve their microbiological safety. The present study may contribute to the development of an appropriate child food safety management system. © 2013 The Society for Applied Microbiology.

Placebo effect of medication cost in Parkinson disease: a randomized double-blind study.

PubMed

Espay, Alberto J; Norris, Matthew M; Eliassen, James C; Dwivedi, Alok; Smith, Matthew S; Banks, Christi; Allendorfer, Jane B; Lang, Anthony E; Fleck, David E; Linke, Michael J; Szaflarski, Jerzy P

2015-02-24

To examine the effect of cost, a traditionally "inactive" trait of intervention, as contributor to the response to therapeutic interventions. We conducted a prospective double-blind study in 12 patients with moderate to severe Parkinson disease and motor fluctuations (mean age 62.4 ± 7.9 years; mean disease duration 11 ± 6 years) who were randomized to a "cheap" or "expensive" subcutaneous "novel injectable dopamine agonist" placebo (normal saline). Patients were crossed over to the alternate arm approximately 4 hours later. Blinded motor assessments in the "practically defined off" state, before and after each intervention, included the Unified Parkinson's Disease Rating Scale motor subscale, the Purdue Pegboard Test, and a tapping task. Measurements of brain activity were performed using a feedback-based visual-motor associative learning functional MRI task. Order effect was examined using stratified analysis. Although both placebos improved motor function, benefit was greater when patients were randomized first to expensive placebo, with a magnitude halfway between that of cheap placebo and levodopa. Brain activation was greater upon first-given cheap but not upon first-given expensive placebo or by levodopa. Regardless of order of administration, only cheap placebo increased activation in the left lateral sensorimotor cortex and other regions. Expensive placebo significantly improved motor function and decreased brain activation in a direction and magnitude comparable to, albeit less than, levodopa. Perceptions of cost are capable of altering the placebo response in clinical studies. This study provides Class III evidence that perception of cost is capable of influencing motor function and brain activation in Parkinson disease. © 2015 American Academy of Neurology.

Evaluating technology service options.

PubMed

Blumberg, D F

1997-05-01

Four service and support options are available to healthcare organizations for maintaining their growth arsenals of medical and information technology. These options include maintaining and servicing all equipment using a facility-based biomedical engineering and MIS service department; using a combination of facility-based service and subcontracted service; expanding facility-based biomedical and MIS service departments to provide service to other healthcare organizations to achieve economies of scale; and outsourcing all maintenance, repair, and technical support services. Independent service companies and original equipment manufacturers (OEMs) are offering healthcare organizations a wider array of service and support capabilities than ever before. However, some health systems have successfully developed their own independent service organizations to take care of their own--and other healthcare organizations'--service and support needs.

Comparison of Two Buyer-Vendor Coordination Models

NASA Astrophysics Data System (ADS)

Diar Astanti, Ririn; Ai, The Jin; Gong, Dah-Chuan; Luong, Hunyh Trung

2018-03-01

This paper develops and compares two mathematical models for describing situation in coordination of buyer and vendor. In this case the vendor which is an Original Equipment Manufacturers (OEMS) of automotive parts, are supplying different type of buyers, i.e. automotive industry, repair shop and automotive dealers. It is well known that automotive industries are operated in Just in Time (JIT) Production Environment, so that the demand behaviour from this buyer has different characteristics than the demand behaviour from other buyers. Two mathematical models are developed in order to depict two different manufacturing strategies as the vendor response dealing with different type of buyers. These strategies are dividing production lot size for each type of buyer and consolidating all buyer’s demand in to single production lot size.

What Fleets Need to Know About Alternative Fuel Vehicle Conversions, Retrofits, and Repowers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, Kay L.; Gonzales, John

2017-10-17

Many fleet managers have opted to incorporate alternative fuels and advanced vehicles into their lineup. Original equipment manufacturers (OEMs) offer a variety of choices, and there are additional options offered by aftermarket companies. There are also a myriad of ways that existing vehicles can be modified to utilize alternative fuels and other advanced technologies. Vehicle conversions and retrofit packages, along with engine repower options, can offer an ideal way to lower vehicle operating costs. This can result in long term return on investment, in addition to helping fleet managers achieve emissions and environmental goals. This report summarizes the various factorsmore » to consider when pursuing a conversion, retrofit, or repower option.« less

The Photogrammetric Survey Methodologies Applied to Low Cost 3d Virtual Exploration in Multidisciplinary Field

NASA Astrophysics Data System (ADS)

Palestini, C.; Basso, A.

2017-11-01

In recent years, an increase in international investment in hardware and software technology to support programs that adopt algorithms for photomodeling or data management from laser scanners significantly reduced the costs of operations in support of Augmented Reality and Virtual Reality, designed to generate real-time explorable digital environments integrated to virtual stereoscopic headset. The research analyzes transversal methodologies related to the acquisition of these technologies in order to intervene directly on the phenomenon of acquiring the current VR tools within a specific workflow, in light of any issues related to the intensive use of such devices , outlining a quick overview of the possible "virtual migration" phenomenon, assuming a possible integration with the new internet hyper-speed systems, capable of triggering a massive cyberspace colonization process that paradoxically would also affect the everyday life and more in general, on human space perception. The contribution aims at analyzing the application systems used for low cost 3d photogrammetry by means of a precise pipeline, clarifying how a 3d model is generated, automatically retopologized, textured by color painting or photo-cloning techniques, and optimized for parametric insertion on virtual exploration platforms. Workflow analysis will follow some case studies related to photomodeling, digital retopology and "virtual 3d transfer" of some small archaeological artifacts and an architectural compartment corresponding to the pronaus of Aurum, a building designed in the 1940s by Michelucci. All operations will be conducted on cheap or free licensed software that today offer almost the same performance as their paid counterparts, progressively improving in the data processing speed and management.

Conception of a cheap infrared camera using a Fresnel lens

NASA Astrophysics Data System (ADS)

Grulois, Tatiana; Druart, Guillaume; Guérineau, Nicolas; Crastes, Arnaud; Sauer, Hervé; Chavel, Pierre

2014-09-01

Today huge efforts are made in the research and industrial areas to design compact and cheap uncooled infrared optical systems for low-cost imagery applications. Indeed, infrared cameras are currently too expensive to be widespread. If we manage to cut their cost, we expect to open new types of markets. In this paper, we will present the cheap broadband microimager we have designed. It operates in the long-wavelength infrared range and uses only one silicon lens at a minimal cost for the manufacturing process. Our concept is based on the use of a thin optics. Therefore inexpensive unconventional materials can be used because some absorption can be tolerated. Our imager uses a thin Fresnel lens. Up to now, Fresnel lenses have not been used for broadband imagery applications because of their disastrous chromatic properties. However, we show that working in a high diffraction order can significantly reduce chromatism. A prototype has been made and the performance of our camera will be discussed. Its characterization has been carried out in terms of modulation transfer function (MTF) and noise equivalent temperature difference (NETD). Finally, experimental images will be presented.

The end of suburbia: what happens when all the cheap oil is gone and what are the health implications?

PubMed

Parker, Alan A

2005-04-01

In isolation, the depletion of the world's stocks of cheap oil is a risk management problem of global proportions. The risk would be manageable given an international agreement by all the developed nations to conserve much of the remaining cheap oil for essential purposes, but there is no such agreement nor is there any intent to create one. Evidence is presented to show that the synergetic interaction of oil depletion with other long-standing environmental problems will result in world food production peaking and then declining at a rapid rate. Australian Census data for the journey to work and the growth of car ownership are analysed. It reveals that car/ oil dependency is growing in outer suburbia, where most Australians live and where future population growth will be housed. It is argued that oil dependency, if not reduced, will develop into a serious threat to national security in a few years. Health promotion professionals have an important role in activating local, State and Commonwealth governments to implement 'travel smart' programs.

On investigation of optical and spin properties of NV centers in aggregates of detonation nanodiamonds

NASA Astrophysics Data System (ADS)

Bolshedvorskii, S. V.; Vorobyov, V. V.; Soshenko, V. V.; Zeleneev, A.; Sorokin, V. N.; Smolyaninov, A. N.; Akimov, A. V.

2018-02-01

Quickly developing application of nitrogen-vacancy color centers in diamond sets demands on cheap and high optical and spin properties nanodiamonds. Among other types, detonation nanodiamonds are easiest for production but often show no NV color centers inside. In this work we show, that aggregates of detonation nanodiamonds could be as good, or even better in terms of brightness and spin properties, than more expensive single crystal nanodiamonds. This way aggregates of detonation nanodiamonds could efficiently serve as cheap and bright source of single photon radiation or sensitive element of biocompatible sensor.

High Temperature DC Bus Capacitor Cost Reduction & Performance Improvements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yializis, Angelo; Taylor, Ralph S.

The goal of this DOE program is to develop high temperature, high energy density, lower cost DC- Link capacitors, for inverters used in electric drive vehicles. Most electric motors in Hybrid Electric Vehicles (“HEVs”), Plug-in Hybrid Vehicles (“PHVs”) and Electric Vehicles (“EVs”) are driven with variable AC voltage supplied by an inverter/converter power module that converts the DC battery voltage to three-phase AC voltage. A key component of the inverter circuit is the DC- Link capacitor used to minimize ripple current, voltage fluctuation, and transient suppression. The DC-Link capacitor is one of the largest, costliest, and most failure-prone components inmore » today’s electric drive invertersystems. The principal weakness of present day DC- Link capacitors is their reliance on a low temperature thermoplastic polypropylene (“PP”) film dielectric. PP is the dielectric of choice for inverter capacitor applications due to its high breakdown strength and low dissipation factor. Major limitations of metallized PP film capacitors include volumetric efficiency, performance under high thermal loads and cost. The latter is especially effectual at lower voltage applications (400V) where PP films with a thickness of about 2.5 m are required that are costly to process. Metallized PP capacitors also do not meet the traditional “under-the-hood” requirements for automotive electronics. The standard temperature requirement for most passive components in the automotive industry has been 125ºC and it is evolving to 140°C. The industry has addressed this problem by reducing the ambient temperature specification for PP capacitors from 125ºC to 105ºC, and also by placing the capacitors on a water-cooled bus bar to extend their life and reliably. The supply chain for the production of PP capacitors is, for the most part, horizontally integrated. It includes the producer of the PP film, the toll metallizer, that deposits a patterned aluminum conductor onto the PP film, and the capacitor producer that winds the metallized film, forms electrical connections, and packages the capacitor (some large capacitor OEMs also metallize their films). The horizontal nature of the supply chain is principally due to the very high capital costs required to integrate the film production process as well as the corresponding depreciation costs. The result is that hundreds of capacitor OEMs use the same base films and capacitor products vary mainly in the way they are wound, formed and packaged, with little or no ability to innovate. Sigma Technologies (“Sigma”) has developed a disruptive process for producing polymer dielectric capacitors that overcome the limitations of PP film capacitors. Metallized self-supported films are replaced with deposited polymer dielectrics, metallized in-line with the polymer deposition process. Highly cross linked, high temperature polymers are formed, that have a thickness as low as 0.1μm, a wide range of dielectric constants and breakdown strength higher than that of PP. The supply chain for producing such capacitors is reduced to a single step performed by the capacitor OEM, in which aluminum wire and a liquid monomer are introduced into a machine to create a large area bulk capacitor material. Polymer Multi-Layer (PML) capacitors are produced by depositing 1000s of dielectric and aluminum electrode on a rotating process drum, forming a nanolaminate “mother capacitor” material, that is segmented and processed into individual capacitor elements. The PML process combines the conventional stepsof a) polymer dielectric formation, b) electrode deposition, and c) winding the capacitor, into a single continuous process performed in a single machine. This allows for complete vertical integration of the capacitor production process, where the capacitor OEM has complete control the dielectric chemistry, the polymer thickness and the electrode metallization process. Sigma partnered with Delphi Automotive Systems (“Delphi”) and Oak Ridge National Labs (“ORNL”) to respond to a DOE Vehicle Technologies Office solicitation to develop a DC-Link capacitor with reduced cost, lower volume and superior thermal properties. The major objectives of the development program included: • Optimization of the polymer dielectric to meet an 140ºC operating environment • Improvements to Sigma’s PML capacitor pilot line to allow the production of sample quantities of DC-Link capacitors • Evaluation of the thermal properties of the PML capacitors • Development of a thermal model to predict capacitor performance under various operating conditions • Electrical and environmental evaluation of PML capacitors based on AEC Q200 standard • Development of a package for PML capacitors • Development of a business plan to transition the PML capacitor technology into production.« less

A software architecture for automating operations processes

NASA Technical Reports Server (NTRS)

Miller, Kevin J.

1994-01-01

The Operations Engineering Lab (OEL) at JPL has developed a software architecture based on an integrated toolkit approach for simplifying and automating mission operations tasks. The toolkit approach is based on building adaptable, reusable graphical tools that are integrated through a combination of libraries, scripts, and system-level user interface shells. The graphical interface shells are designed to integrate and visually guide a user through the complex steps in an operations process. They provide a user with an integrated system-level picture of an overall process, defining the required inputs and possible output through interactive on-screen graphics. The OEL has developed the software for building these process-oriented graphical user interface (GUI) shells. The OEL Shell development system (OEL Shell) is an extension of JPL's Widget Creation Library (WCL). The OEL Shell system can be used to easily build user interfaces for running complex processes, applications with extensive command-line interfaces, and tool-integration tasks. The interface shells display a logical process flow using arrows and box graphics. They also allow a user to select which output products are desired and which input sources are needed, eliminating the need to know which program and its associated command-line parameters must be executed in each case. The shells have also proved valuable for use as operations training tools because of the OEL Shell hypertext help environment. The OEL toolkit approach is guided by several principles, including the use of ASCII text file interfaces with a multimission format, Perl scripts for mission-specific adaptation code, and programs that include a simple command-line interface for batch mode processing. Projects can adapt the interface shells by simple changes to the resources configuration file. This approach has allowed the development of sophisticated, automated software systems that are easy, cheap, and fast to build. This paper will discuss our toolkit approach and the OEL Shell interface builder in the context of a real operations process example. The paper will discuss the design and implementation of a Ulysses toolkit for generating the mission sequence of events. The Sequence of Events Generation (SEG) system provides an adaptable multimission toolkit for producing a time-ordered listing and timeline display of spacecraft commands, state changes, and required ground activities.

Red rubber bulb, cheap and effective vacuum drainage.

PubMed

Vatanasapt, V; Areemit, S; Jeeravipoolvarn, P; Kuyyakanond, T; Kuptarnond, C

1989-04-01

Red rubber bulbs have been used for vacuum drainage in head, neck, breast and several other operations by the authors since 1975 quite effectively without any major problems. The vacuum pressure of the red rubber bulbs was found to be higher than the expensive commercially available vacuum wound drainage device. The question of remaining old blood and infective microorganisms inside the reservoir for the reused ones were tested by the manual cleaning process and the standard sterile technique using steam under increased pressure (autoclave). The result is quite satisfactory. We encourage the use of this cheap and effective (made in Thailand) vacuum wound drainage in Thai hospitals and Thai medical schools.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alder, J.; Cook, W.J.; McGuire, S.

The overuse of ancient underground aquifers combines with an uneven distribution of water resource, drought, waste, and pollution to present serious policy choices which could follow the same ineffective path as our oil policies. Irrigating arid and semi-arid lands is an energy-intensive and expensive undertaking that needs to be reexamined. Water shortages due to shifts in weather patterns can lead to heavier-than-normal reliance on the major aquifers, while contamination of surface and ground waters further depletes US water supplies. Policy decisions must be made that will alter wasteful consumption habits, introducing metering and conservation to convince Americans that cheap water,more » like cheap oil, is no longer available. (DCK)« less

Metallic bionanocatalysts: potential applications as green catalysts and energy materials.

PubMed

Macaskie, Lynne E; Mikheenko, Iryna P; Omajai, Jacob B; Stephen, Alan J; Wood, Joseph

2017-09-01

Microbially generated or supported nanocatalysts have potential applications in green chemistry and environmental application. However, precious (and base) metals biorefined from wastes may be useful for making cheap, low-grade catalysts for clean energy production. The concept of bionanomaterials for energy applications is reviewed with respect to potential fuel cell applications, bio-catalytic upgrading of oils and manufacturing 'drop-in fuel' precursors. Cheap, effective biomaterials would facilitate progress towards dual development goals of sustainable consumption and production patterns and help to ensure access to affordable, reliable, sustainable and modern energy. © 2017 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Linear transmitter design for MSAT terminals

NASA Technical Reports Server (NTRS)

Wilkinson, Ross; Macleod, John; Beach, Mark; Bateman, Andrew

1990-01-01

One of the factors that will undoubtedly influence the choice of modulation format for mobile satellites, is the availability of cheap, power-efficient, linear amplifiers for mobile terminal equipment operating in the 1.5-1.7 GHz band. Transmitter linearity is not easily achieved at these frequencies, although high power (20W) class A/AB devices are becoming available. However, these components are expensive and require careful design to achieve a modest degree of linearity. In this paper an alternative approach to radio frequency (RF) power amplifier design for mobile satellite (MSAT) terminals using readily-available, power-efficient, and cheap class C devices in a feedback amplifier architecture is presented.

High Ethanol Contents of Spirit Drinks in Kibera Slums, Kenya: Implications for Public Health.

PubMed

Okaru, Alex O; Abuga, Kennedy O; Kibwage, Isaac O; Lachenmeier, Dirk W

2017-10-17

Cheap licit and artisanal illicit spirit drinks have been associated with numerous outbreaks of alcohol poisoning especially with methanol. This study aimed to evaluate the quality of cheap spirit drinks in Kibera slums in Nairobi County, Kenya. The samples consisted of cheap licit spirits ( n = 11) and the artisanal spirit drink, ' chang'aa' , ( n = 28). The parameters of alcoholic strength and volatile composition were used as indicators of quality and were determined using gas chromatography with flame ionization detection (GC-FID) and gas chromatography-mass spectrometry (GC-MS) respectively. The ranges for alcoholic strength were 42.8-85.8% vol and 28.3-56.7% vol for chang'aa and licit spirit drinks respectively, while the pH ranges were 3.3-4.2 and 4.4-4.8 for chang'aa and licit spirit drinks respectively. The majority of volatiles were found in artisanal spirits and they included higher alcohols, ethyl esters and carbonyl compounds. The alcoholic strength of all the artisanal spirits (100%) and 91% of the licit spirits was above the 40% vol of standard spirits such as vodka. The high ethanol content of the alcohol products was the only element of public health significance in this study.

Enhancing the economic value and consumer preferences of commercial mondol stingray (Himantura gerardi) leather creative products

NASA Astrophysics Data System (ADS)

Sahubawa, L.; Pertiwiningrum, A.; Rahmadian, Y.

2018-03-01

The research objectives were to design, assess the economic value and consumer preference level of stingray leather products. The research method included a product design, analysis of economic value and consumer preferences. Mondol stingray (Himantura gerardi) leather, with a length of 50 cm and width of 30 cm, were processed into ID card wallet, man and women’s wallet and key holder. The number of respondents involved to analyze the preference level is 75 respondents (students, lecturers and employees of Universitas Gadjah Mada). Indicators of consumer preferences were model, color, price and purchasing power. The price of ID card wallet is Rp. 450,000; women wallet is Rp. 650,000 and a key holder is Rp. 300,000. Consumer preferences on ID card wallet were as follow: 84 % stated very interesting model; 83 % stated very interesting color; 61 % stated cheap and 53 % had enough. Consumer preferences of women’s wallet were as follow: 81 % stated very interesting model; 84 % stated very interesting color; 56 % stated cheap and 57 % had enough. Consumer preferences on key holder were as follow: 49 % stated interesting model; 72 % stated very interesting color; 61 % stated cheap and 57 % had enough.

Availability and Use of Cheap Tobacco in the United Kingdom 2002-2014: Findings From the International Tobacco Control Project.

PubMed

Partos, Timea R; Gilmore, Anna B; Hitchman, Sara C; Hiscock, Rosemary; Branston, J Robert; McNeill, Ann

2018-05-03

Raising tobacco prices is the most effective population-level intervention for reducing smoking, but this is undermined by the availability of cheap tobacco. This study monitors trends in cheap tobacco use among adult smokers in the United Kingdom between 2002 and 2014 via changes in product type, purchase source, and prices paid. Weighted data from 10 waves of the International Tobacco Control policy evaluation study were used. This is a longitudinal cohort study of adult smokers with replenishment; 6169 participants provided 15812 responses. Analyses contrasted (1) product type: roll-your-own (RYO) tobacco, factory-made packs (FM-P), and factory-made cartons (FM-C); (2) purchase source: UK store-based sources (e.g., supermarkets and convenience stores) with non-UK/nonstore sources representing tax avoidance/evasion (e.g., outside the UK, duty free, and informal sellers); and (3) prices paid (inflation-adjusted to 2014 values). Generalized estimating equations tested linear changes over time. (1) RYO use increased significantly over time as FM decreased. (2) UK store-based sources constituted approximately 80% of purchases over time, with no significant increases in tax avoidance/evasion. (3) Median RYO prices were less than half that of FM, with FM-C cheaper than FM-P. Non-UK/nonstore sources were cheapest. Price increases of all three product types from UK store-based sources from 2002 to 2014 were statistically significant but not substantial. Wide (and increasing for FM-P) price ranges meant each product type could be purchased in 2014 at prices below their 2002 medians from UK store-based sources. Options exist driving UK smokers to minimize their tobacco expenditure; smokers do so largely by purchasing cheap tobacco products from UK stores. The effectiveness of price increases as a deterrent to smoking is being undermined by the availability of cheap tobacco such as roll-your-own tobacco and cartons of packs of factory-made cigarettes. Wide price ranges allowed smokers in 2014 to easily obtain cigarettes at prices comparable to 12 years prior, without resorting to tax avoidance or evasion. UK store-based sources accounted for 80% or more of all tobacco purchases between 2002 and 2014, suggesting little change in tax avoidance or evasion over time. There was a widening price range between the cheapest and most expensive factory-made cigarettes.

Availability and Use of Cheap Tobacco in the United Kingdom 2002–2014: Findings From the International Tobacco Control Project

PubMed Central

Partos, Timea R; Gilmore, Anna B; Hitchman, Sara C; Hiscock, Rosemary; Branston, J Robert; McNeill, Ann

2018-01-01

Abstract Introduction Raising tobacco prices is the most effective population-level intervention for reducing smoking, but this is undermined by the availability of cheap tobacco. This study monitors trends in cheap tobacco use among adult smokers in the United Kingdom between 2002 and 2014 via changes in product type, purchase source, and prices paid. Methods Weighted data from 10 waves of the International Tobacco Control policy evaluation study were used. This is a longitudinal cohort study of adult smokers with replenishment; 6169 participants provided 15812 responses. Analyses contrasted (1) product type: roll-your-own (RYO) tobacco, factory-made packs (FM-P), and factory-made cartons (FM-C); (2) purchase source: UK store-based sources (e.g., supermarkets and convenience stores) with non-UK/nonstore sources representing tax avoidance/evasion (e.g., outside the UK, duty free, and informal sellers); and (3) prices paid (inflation-adjusted to 2014 values). Generalized estimating equations tested linear changes over time. Results (1) RYO use increased significantly over time as FM decreased. (2) UK store-based sources constituted approximately 80% of purchases over time, with no significant increases in tax avoidance/evasion. (3) Median RYO prices were less than half that of FM, with FM-C cheaper than FM-P. Non-UK/nonstore sources were cheapest. Price increases of all three product types from UK store-based sources from 2002 to 2014 were statistically significant but not substantial. Wide (and increasing for FM-P) price ranges meant each product type could be purchased in 2014 at prices below their 2002 medians from UK store-based sources. Conclusions Options exist driving UK smokers to minimize their tobacco expenditure; smokers do so largely by purchasing cheap tobacco products from UK stores. Implications The effectiveness of price increases as a deterrent to smoking is being undermined by the availability of cheap tobacco such as roll-your-own tobacco and cartons of packs of factory-made cigarettes. Wide price ranges allowed smokers in 2014 to easily obtain cigarettes at prices comparable to 12 years prior, without resorting to tax avoidance or evasion. UK store-based sources accounted for 80% or more of all tobacco purchases between 2002 and 2014, suggesting little change in tax avoidance or evasion over time. There was a widening price range between the cheapest and most expensive factory-made cigarettes. PMID:28525594

Fleet DNA (Presentation)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walkokwicz, K.; Duran, A.

2014-06-01

The Fleet DNA project objectives include capturing and quantifying drive cycle and technology variation for the multitude of medium- and heavy-duty vocations; providing a common data storage warehouse for medium- and heavy-duty vehicle fleet data across DOE activities and laboratories; and integrating existing DOE tools, models, and analyses to provide data-driven decision making capabilities. Fleet DNA advantages include: for Government - providing in-use data for standard drive cycle development, R&D, tech targets, and rule making; for OEMs - real-world usage datasets provide concrete examples of customer use profiles; for fleets - vocational datasets help illustrate how to maximize return onmore » technology investments; for Funding Agencies - ways are revealed to optimize the impact of financial incentive offers; and for researchers -a data source is provided for modeling and simulation.« less

Robotic inspection of fiber reinforced composites using phased array UT

NASA Astrophysics Data System (ADS)

Stetson, Jeffrey T.; De Odorico, Walter

2014-02-01

Ultrasound is the current NDE method of choice to inspect large fiber reinforced airframe structures. Over the last 15 years Cartesian based scanning machines using conventional ultrasound techniques have been employed by all airframe OEMs and their top tier suppliers to perform these inspections. Technical advances in both computing power and commercially available, multi-axis robots now facilitate a new generation of scanning machines. These machines use multiple end effector tools taking full advantage of phased array ultrasound technologies yielding substantial improvements in inspection quality and productivity. This paper outlines the general architecture for these new robotic scanning systems as well as details the variety of ultrasonic techniques available for use with them including advances such as wide area phased array scanning and sound field adaptation for non-flat, non-parallel surfaces.

NASA-DoD Lead-Free Electronics Project

NASA Technical Reports Server (NTRS)

Kessel, Kurt

2011-01-01

Original Equipment Manufacturers (OEMs). depots. and support contractors have to be prepared to deal with an electronics supply chain thaI increasingly provides parts with lead-free finishes. some labeled no differently and intenningled with their SnPb counterparts. Allowance oflead-free components presents one of the greatest risks to the reliability of military and aerospace electronics. The introduction of components with lead-free lenninations, tennination finishes, or circuit boards presents a host of concerns to customers. suppliers, and maintainers of aerospace and military electronic systems such as: 1. Electrical shorting due to tin whiskers; 2. Incompatibility oflead-free processes and parameters (including higher melting points of lead-free alloys) with other materials in the system; and 3. Unknown material properties and incompatibilities that could reduce solder joint re liability.

Hydrogen Fuel Quality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rockward, Tommy

2012-07-16

For the past 6 years, open discussions and/or meetings have been held and are still on-going with OEM, Hydrogen Suppliers, other test facilities from the North America Team and International collaborators regarding experimental results, fuel clean-up cost, modeling, and analytical techniques to help determine levels of constituents for the development of an international standard for hydrogen fuel quality (ISO TC197 WG-12). Significant progress has been made. The process for the fuel standard is entering final stages as a result of the technical accomplishments. The objectives are to: (1) Determine the allowable levels of hydrogen fuel contaminants in support of themore » development of science-based international standards for hydrogen fuel quality (ISO TC197 WG-12); and (2) Validate the ASTM test method for determining low levels of non-hydrogen constituents.« less

The need to certify products to CDRH Regulations.

PubMed

Weiner, R

1994-06-01

Laser products that are sold in the United States are required to comply with the regulations published by the Center for Devices and Radiological Health (CDRH) within the US Food and Drug Administration [1]. The need to certify products is straightforward in most instances, however, the applicability of the regulations is not as clear for: lasers sold only to Original Equipment Manufacturers (OEMs) as components for incorporation into end-use products, end-use products that contain lasers which have already been certified by their manufacturers, and end-use products that are being imported into the US and that already comply with international laser safety standards. This article will discuss these applications in an attempt to clarify the need for certification by laser product manufacturers and importers. The discussion applies equally for lasers and laser systems.

Wake-up transceivers for structural health monitoring of bridges

NASA Astrophysics Data System (ADS)

Kumberg, T.; Kokert, J.; Younesi, V.; Koenig, S.; Reindl, L. M.

2016-04-01

In this article we present a wireless sensor network to monitor the structural health of a large-scale highway bridge in Germany. The wireless sensor network consists of several sensor nodes that use wake-up receivers to realize latency free and low-power communication. The sensor nodes are either equipped with very accurate tilt sensor developed by Northrop Grumman LITEF GmbH or with a Novatel OEM615 GNSS receiver. Relay nodes are required to forward measurement data to a base station located on the bridge. The base station is a gateway that transmits the local measurement data to a remote server where it can be further analyzed and processed. Further on, we present an energy harvesting system to supply the energy demanding GNSS sensor nodes to realize long term monitoring.

Simulations of Propane and Butane Gas Sensor Based on Pristine Armchair Graphene Nanoribbon

NASA Astrophysics Data System (ADS)

Rashid, Haroon; Koel, Ants; Rang, Toomas

2018-05-01

Over the last decade graphene and its derivatives have gained a remarkable place in research field. As silicon technology is approaching to its geometrical limits so there is a need of alternate that can replace it. Graphene has emerged as a potential candidate for future nano-electronics applications due to its exceptional and extraordinary chemical, optical, electrical and mechanical properties. Graphene based sensors have gained significance for a wide range of sensing applications like detection of biomolecules, chemicals and gas molecules. It can be easily used to make electrical contacts and manipulate them according to the requirements as compared to the other nanomaterials. The intention of the work presented in this article is to contribute in this field by simulating a novel and cheap graphene nanoribbon sensor for the household gas leakage detection. QuantumWise Atomistix (ATK) software is used for the simulations of propane and butane gas sensor. Projected device density of the states (PDDOS) and the transmission spectrum of the device in the proximity of gas molecules are calculated and discussed. The change in the electric current through the device in the presence of the gas molecules is used as a gas detection mechanism for the simulated sensor.

Application of Artificial Intelligence to the Prediction of the Antimicrobial Activity of Essential Oils.

PubMed

Daynac, Mathieu; Cortes-Cabrera, Alvaro; Prieto, Jose M

2015-01-01

Essential oils (EOs) are vastly used as natural antibiotics in Complementary and Alternative Medicine (CAM). Their intrinsic chemical variability and synergisms/antagonisms between its components make difficult to ensure consistent effects through different batches. Our aim is to evaluate the use of artificial neural networks (ANNs) for the prediction of their antimicrobial activity. Methods. The chemical composition and antimicrobial activity of 49 EOs, extracts, and/or fractions was extracted from NCCLS compliant works. The fast artificial neural networks (FANN) software was used and the output data reflected the antimicrobial activity of these EOs against four common pathogens: Staphylococcus aureus, Escherichia coli, Candida albicans, and Clostridium perfringens as measured by standardised disk diffusion assays. Results. ANNs were able to predict >70% of the antimicrobial activities within a 10 mm maximum error range. Similarly, ANNs were able to predict 2 or 3 different bioactivities at the same time. The accuracy of the prediction was only limited by the inherent errors of the popular antimicrobial disk susceptibility test and the nature of the pathogens. Conclusions. ANNs can be reliable, fast, and cheap tools for the prediction of the antimicrobial activity of EOs thus improving their use in CAM.

Review of Thawing Time Prediction Models Depending
on Process Conditions and Product Characteristics

PubMed Central

Kluza, Franciszek; Spiess, Walter E. L.; Kozłowicz, Katarzyna

2016-01-01

Summary Determining thawing times of frozen foods is a challenging problem as the thermophysical properties of the product change during thawing. A number of calculation models and solutions have been developed. The proposed solutions range from relatively simple analytical equations based on a number of assumptions to a group of empirical approaches that sometimes require complex calculations. In this paper analytical, empirical and graphical models are presented and critically reviewed. The conditions of solution, limitations and possible applications of the models are discussed. The graphical and semi--graphical models are derived from numerical methods. Using the numerical methods is not always possible as running calculations takes time, whereas the specialized software and equipment are not always cheap. For these reasons, the application of analytical-empirical models is more useful for engineering. It is demonstrated that there is no simple, accurate and feasible analytical method for thawing time prediction. Consequently, simplified methods are needed for thawing time estimation of agricultural and food products. The review reveals the need for further improvement of the existing solutions or development of new ones that will enable accurate determination of thawing time within a wide range of practical conditions of heat transfer during processing. PMID:27904387

Metadynamics for training neural network model chemistries: A competitive assessment

NASA Astrophysics Data System (ADS)

Herr, John E.; Yao, Kun; McIntyre, Ryker; Toth, David W.; Parkhill, John

2018-06-01

Neural network model chemistries (NNMCs) promise to facilitate the accurate exploration of chemical space and simulation of large reactive systems. One important path to improving these models is to add layers of physical detail, especially long-range forces. At short range, however, these models are data driven and data limited. Little is systematically known about how data should be sampled, and "test data" chosen randomly from some sampling techniques can provide poor information about generality. If the sampling method is narrow, "test error" can appear encouragingly tiny while the model fails catastrophically elsewhere. In this manuscript, we competitively evaluate two common sampling methods: molecular dynamics (MD), normal-mode sampling, and one uncommon alternative, Metadynamics (MetaMD), for preparing training geometries. We show that MD is an inefficient sampling method in the sense that additional samples do not improve generality. We also show that MetaMD is easily implemented in any NNMC software package with cost that scales linearly with the number of atoms in a sample molecule. MetaMD is a black-box way to ensure samples always reach out to new regions of chemical space, while remaining relevant to chemistry near kbT. It is a cheap tool to address the issue of generalization.

Turning a $10 Computer into a Powerful DIY Data Logger

NASA Astrophysics Data System (ADS)

Schilperoort, B.

2017-12-01

Due the rapid advance of consumer electronics, much more powerful and cheaper options are available for DIY projects. The $10 `Raspberry Pi Zero W' computer, with abilities like WiFi, Bluetooth, HDMI video output, and a large cheap memory, can be used for data logging purposes. The computer has a range of input and output pins on the board, with which virtually every type of digital sensor communication is possible. With an extra component, analog measurements can also be made. An extra option is the addition of a camera, which can be connected straight to the board. However, due to the relatively high power consumption (0.5 - 0.7 Watt), the `Zero W' is not optimal for off-the-grid locations. For ease of use, the collected data can be downloaded over a local WiFi network using your smartphone or a laptop. No extra software or skills are needed, it is as simple as visiting a webpage and pressing download, making data collection a quick and easy task. With simple step by step instructions you can set up your own data logger, to collect data from sensors ranging from simple temperature and water level measurements, to sonic anemometers.

Development of a simplified densitometer for the determination of aflatoxins by thin-layer chromatography.

PubMed

Stroka, J; Anklam, E

2000-12-29

A simple, miniaturised and low power consuming (battery, fully semiconductor based) detector cell (SeBaDeC) was developed for the densitometric measurement of aflatoxins on TLC plates. A UV-light emitting diode (UV-LED) with a peak emission wavelength of 370 nm was used for fluorescence excitation, while a photo diode with a peak sensitivity of 440 nm in combination with a 418 nm cut-off filter was applied for detecting the fluorescence intensity. The resulting signal was further amplified by means of a commonly used operational amplifier integrated circuit (OA) and directly converted into a digital signal with a simple analogue-digital-converter (ADC). This signal was recorded at the serial (RS232) port of a portable PC and processed with a spreadsheet program. The software used for data recording is freeware and available in its source code, and the long lifetime of the UV-LED (up to 10 000 h) permits a maintenance free application of this device. This simplified device has shown to be able to detect concentrations of aflatoxins of 1 ng, thus offering a cheap and sensitive alternative to currently available TCL scanners.

A New Dusts Sensor for Cultural Heritage Applications Based on Image Processing

PubMed Central

Proietti, Andrea; Leccese, Fabio; Caciotta, Maurizio; Morresi, Fabio; Santamaria, Ulderico; Malomo, Carmela

2014-01-01

In this paper, we propose a new sensor for the detection and analysis of dusts (seen as powders and fibers) in indoor environments, especially designed for applications in the field of Cultural Heritage or in other contexts where the presence of dust requires special care (surgery, clean rooms, etc.). The presented system relies on image processing techniques (enhancement, noise reduction, segmentation, metrics analysis) and it allows obtaining both qualitative and quantitative information on the accumulation of dust. This information aims to identify the geometric and topological features of the elements of the deposit. The curators can use this information in order to design suitable prevention and maintenance actions for objects and environments. The sensor consists of simple and relatively cheap tools, based on a high-resolution image acquisition system, a preprocessing software to improve the captured image and an analysis algorithm for the feature extraction and the classification of the elements of the dust deposit. We carried out some tests in order to validate the system operation. These tests were performed within the Sistine Chapel in the Vatican Museums, showing the good performance of the proposed sensor in terms of execution time and classification accuracy. PMID:24901977

Methodological aspects of EEG and body dynamics measurements during motion

PubMed Central

Reis, Pedro M. R.; Hebenstreit, Felix; Gabsteiger, Florian; von Tscharner, Vinzenz; Lochmann, Matthias

2014-01-01

EEG involves the recording, analysis, and interpretation of voltages recorded on the human scalp which originate from brain gray matter. EEG is one of the most popular methods of studying and understanding the processes that underlie behavior. This is so, because EEG is relatively cheap, easy to wear, light weight and has high temporal resolution. In terms of behavior, this encompasses actions, such as movements that are performed in response to the environment. However, there are methodological difficulties which can occur when recording EEG during movement such as movement artifacts. Thus, most studies about the human brain have examined activations during static conditions. This article attempts to compile and describe relevant methodological solutions that emerged in order to measure body and brain dynamics during motion. These descriptions cover suggestions on how to avoid and reduce motion artifacts, hardware, software and techniques for synchronously recording EEG, EMG, kinematics, kinetics, and eye movements during motion. Additionally, we present various recording systems, EEG electrodes, caps and methods for determinating real/custom electrode positions. In the end we will conclude that it is possible to record and analyze synchronized brain and body dynamics related to movement or exercise tasks. PMID:24715858

Application of Artificial Intelligence to the Prediction of the Antimicrobial Activity of Essential Oils

PubMed Central

Daynac, Mathieu; Cortes-Cabrera, Alvaro; Prieto, Jose M.

2015-01-01

Essential oils (EOs) are vastly used as natural antibiotics in Complementary and Alternative Medicine (CAM). Their intrinsic chemical variability and synergisms/antagonisms between its components make difficult to ensure consistent effects through different batches. Our aim is to evaluate the use of artificial neural networks (ANNs) for the prediction of their antimicrobial activity. Methods. The chemical composition and antimicrobial activity of 49 EOs, extracts, and/or fractions was extracted from NCCLS compliant works. The fast artificial neural networks (FANN) software was used and the output data reflected the antimicrobial activity of these EOs against four common pathogens: Staphylococcus aureus, Escherichia coli, Candida albicans, and Clostridium perfringens as measured by standardised disk diffusion assays. Results. ANNs were able to predict >70% of the antimicrobial activities within a 10 mm maximum error range. Similarly, ANNs were able to predict 2 or 3 different bioactivities at the same time. The accuracy of the prediction was only limited by the inherent errors of the popular antimicrobial disk susceptibility test and the nature of the pathogens. Conclusions. ANNs can be reliable, fast, and cheap tools for the prediction of the antimicrobial activity of EOs thus improving their use in CAM. PMID:26457111

Designing of Intelligent Multilingual Patient Reported Outcome System (IMPROS)

PubMed Central

Pourasghar, Faramarz; Partovi, Yeganeh

2015-01-01

Background: By self-reporting outcome procedure the patients themselves record disease symptoms outside medical centers and then report them to medical staff in specific periods of time. One of the self-reporting methods is the application of interactive voice response (IVR), in which some pre-designed questions in the form of voice tracks would be played and then the caller responses the questions by pressing phone’s keypad bottoms. Aim: The present research explains the main framework of such system designing according to IVR technology that is for the first time designed and administered in Iran. Methods: Interactive Voice Response system was composed by two main parts of hardware and software. Hardware section includes one or several digital phone lines, a modem card with voice playing capability and a PC. IVR software on the other hand, acts as an intelligent control center, records call information and controls incoming data. Results: One of the main features of the system is its capability to be administered in common PCs, utilizing simple and cheap modems, high speed to take responses and it’s appropriateness to low literate patients. The system is applicable for monitoring chronic diseases, cancer and also in psychological diseases and can be suitable for taking care of elders and Children who require long term cares. Other features include user-friendly, decrease in direct and indirect costs of disease treatment and enjoying from high level of security to access patients’ profiles. Conclusions: Intelligent multilingual patient reported outcome system (IMPROS) by controlling diseases gives the opportunity to patients to have more participation during treatment and it improves mutual interaction between patient and medical staff. Moreover it increases the quality of medical services, Additional to empowering patients and their followers. PMID:26635441

Future trends in image coding

NASA Astrophysics Data System (ADS)

Habibi, Ali

1993-01-01

The objective of this article is to present a discussion on the future of image data compression in the next two decades. It is virtually impossible to predict with any degree of certainty the breakthroughs in theory and developments, the milestones in advancement of technology and the success of the upcoming commercial products in the market place which will be the main factors in establishing the future stage to image coding. What we propose to do, instead, is look back at the progress in image coding during the last two decades and assess the state of the art in image coding today. Then, by observing the trends in developments of theory, software, and hardware coupled with the future needs for use and dissemination of imagery data and the constraints on the bandwidth and capacity of various networks, predict the future state of image coding. What seems to be certain today is the growing need for bandwidth compression. The television is using a technology which is half a century old and is ready to be replaced by high definition television with an extremely high digital bandwidth. Smart telephones coupled with personal computers and TV monitors accommodating both printed and video data will be common in homes and businesses within the next decade. Efficient and compact digital processing modules using developing technologies will make bandwidth compressed imagery the cheap and preferred alternative in satellite and on-board applications. In view of the above needs, we expect increased activities in development of theory, software, special purpose chips and hardware for image bandwidth compression in the next two decades. The following sections summarize the future trends in these areas.

A low-cost experiment to visualise the Fourier series: video analysis of a real plucked coiled spring

NASA Astrophysics Data System (ADS)

de Jesus, V. L. B.; Haubrichs, C.; de Oliveira, A. L.; Sasaki, D. G. G.

2018-03-01

In the present work, we develop a low-cost and simple experiment to visualise Fourier’s synthesis using a short, soft, and light plastic coiled spring oscillating in a horizontal plane, and a basic camera (120 fps). It is shown that the spring obeys a linear wave differential equation, as gravitational influence is neglected. A nonlinear criterion is evaluated to determine if magnitudes of the parameters in the initial conditions satisfy the linear wave equation. Our setup promotes some desirable characteristics that make Fourier’s synthesis experiments feasible, visual, and enlightening: (i) it requires few, common, and cheap resources, and the experiment can be carried out even in a high-school laboratory; (ii) since the spring’s tension is small (∼1 N, on average), the frequencies of normal modes are low (close to 2 Hz), and therefore, it is possible to record the oscillations just with the camera and extract a considerable number of position and time data in just one cycle; (iii) when the video is loaded in the Tracker free software, it can be reproduced in slow motion. Since the frequencies involved are low, an interesting and instructive temporal sequence of images of the spring displaying the typical trapezoidal shape appears clearly; (iv) the tools associated with the Tracker software tools can yield the relevant oscillation parameters, such as the damping constant, amplitudes, frequencies, and phases; and (v) it is possible to carry out superposition of a snapshot of the spring in Tracker at any time, and to draw the related Fourier synthesis graphs. The visual match between the shape of the spring and the theoretical graph is remarkable, and can be enhanced by adding the damping term.

New Airborne Sensors and Platforms for Solving Specific Tasks in Remote Sensing

NASA Astrophysics Data System (ADS)

Kemper, G.

2012-07-01

A huge number of small and medium sized sensors entered the market. Today's mid format sensors reach 80 MPix and allow to run projects of medium size, comparable with the first big format digital cameras about 6 years ago. New high quality lenses and new developments in the integration prepared the market for photogrammetric work. Companies as Phase One or Hasselblad and producers or integrators as Trimble, Optec, and others utilized these cameras for professional image production. In combination with small camera stabilizers they can be used also in small aircraft and make the equipment small and easy transportable e.g. for rapid assessment purposes. The combination of different camera sensors enables multi or hyper-spectral installations e.g. useful for agricultural or environmental projects. Arrays of oblique viewing cameras are in the market as well, in many cases these are small and medium format sensors combined as rotating or shifting devices or just as a fixed setup. Beside the proper camera installation and integration, also the software that controls the hardware and guides the pilot has to solve much more tasks than a normal FMS did in the past. Small and relatively cheap Laser Scanners (e.g. Riegl) are in the market and a proper combination with MS Cameras and an integrated planning and navigation is a challenge that has been solved by different softwares. Turnkey solutions are available e.g. for monitoring power line corridors where taking images is just a part of the job. Integration of thermal camera systems with laser scanner and video capturing must be combined with specific information of the objects stored in a database and linked when approaching the navigation point.

Truckstop -- and Truck!-- Electrification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Skip Yeakel

2001-12-13

The conclusions of this paper are: 0.5-1.5 G/H and/or BUSG/Y--how much time and money will it take to quantify and WHY BOTHER TO DO SO? No shortage of things to do re truckstop--+ truck!-- electrification; Better that government and industry should put many eggs in lots of baskets vs. all in one or few; Best concepts will surface as most viable; Economic appeal better than regulation or brute force; Launch Ground Freight Partnership and give it a chance to work; Demonstration is an effective means to educate, and learn from, customers--learning is a two way street; Research, Development, Demonstration, andmore » Deployment (RD 3) are all important but only deployment gets results; TSE can start small in numbers of spaces to accommodate economically inspired growth but upfront plans should be made for expansion if meaningful idle reduction is to follow via TE; 110VAC 15A service/ parking space is minimal--if infrastructure starts like this, upfront plans must be made to increase capacity; Increased electrification of truckstop and truck alike will result in much better life on the road; Improved sleep will improve driver alertness and safety; Reduced idling will significantly reduce fuel use and emissions; Universal appeal for DOD, DOE, DOT, EPA, OEMs, and users alike; Clean coal, gas, hydro, nuclear, or wind energy sources are all distinctly American means by which to generate electricity; Nothing can compete with diesel fuel to serve mobile truck needs; stationary trucks are like power plants--they don't move and should NOT be powered by petroleum products whenever possible; Use American fueled power plants--electricity--to serve truck idling needs wherever practical to do so; encourage economic aspect; Create and reward industry initiatives to reduce fuel use; Eliminate FET on new trucks, provide tax credits (non highway fuel use and investment), provide incentives based on results; Encourage newer/ cleaner truck use; solicit BAAs with mandatory OEM/ fleet participation/ lead; and A gallon saved is a gallon earned-- start NOW, not later.« less

In-situ phosphatizing coatings for aerospace, OEM and coil coating applications

NASA Astrophysics Data System (ADS)

Neuder, Heather Aurelia

The current metal coating process is a multi-step process. The surface is cleaned, primered, dried and then painted. The process is labor intensive and time consuming. The wash primer is a conversion coating, which prepares metal surface for better paint adhesion. The wash primers currently used often contain hexavalent chromium (Cr6+), which seals the pores in the conversion coating. The presence of hexavalent chromium, a known carcinogen, and volatile organic compounds (VOCs) make waste disposal expensive and pose dangers to workers. The novel technique of in-situ phosphatizing coating (ISPC) is a single-step, chrome-free alternative to the present coating practice. Formulation of an ISPC involves predispersal of an in-situ phosphatizing reagent (ISPR) into the paint system to form a stable formulation. The ISPR reacts with the metal surface and bonds with the paint film simultaneously, which eliminates the need for a conversion coating. In acid catalyzed paint systems, such as polyester-melamine paints, the ISPR also catalyzes cross-linking reactions between the melamine and the polyester polyols. ISPCs are formulated using commercially available coating systems including: polyester-melamine, two-component epoxy, polyurethane and high-hydroxy content polyester-melamine coil coating. The ISPCs are applied to metal substrates and their performances are evaluated using electrochemical, thermal and standard American Society for Testing and Materials (ASTM) testing methods. In addition, ISPCs were designed and formulated based on: (1) phosphate chemistry, (2) polymer chemistry, (3) sol-gel chemistry, and (4) the ion-exchange principle. Organo-functionalized silanes, which serve as excellent coupling and dispersion agents, are incorporated into the optimized ISPC formula and evaluated using standard ASTM testing methods and electrochemical spectroscopy. Also, an ion-exchange pigment, which leads to better adhesion by forming a mixed metal silicate surface, is dispersed into an ISPC and the performance of the final coating formulation is evaluated. Successful ISPCs formulated for multiple coating systems exhibited excellent adhesion, hardness and gloss, which supports their suitability as a chrome-free, single-step alternative for aerospace, original equipment manufacturing (OEM) and coil coating applications.

Retrieval and characterization of ozone profiles from solar infrared spectra at the Jungfraujoch

NASA Astrophysics Data System (ADS)

Barret, B.; de MazièRe, M.; Demoulin, P.

2002-12-01

Vertical distributions of ozone from June 1996 to November 2000 have been retrieved from high-resolution Fourier transform infrared (FTIR) solar absorption spectra recorded at the primary Network for Detection of Stratospheric Change station of the Jungfraujoch in the Swiss Alps (46.5°N, 8°E, 3580 m above sea level (asl). The retrievals were performed using the Optimal Estimation Method (OEM), both in a narrow spectral interval (1002.567-1003.2 cm-1) and in a broad spectral interval (1000.0-1005.0 cm-1) in the O3 9.6-μm band. A thorough characterization of the retrievals has been performed following the lines of OEM, including an information content analysis, a study of the correlations between retrieved instrumental parameters and retrieved ozone concentrations, and an evaluation of the O3 profile error budget. It is demonstrated that the information content is significantly higher for spectra in the broad microwindow, resulting in higher vertical resolutions, on the order of 8 km, of the retrieved profiles extending up to 40 km, and less correlations between retrieved parameters. An independent statistical verification of the retrieval results and their characterization has been performed by comparison of the FTIR ozone profiles with independent measurements. These are the ozone profile measurements from balloon soundings at Payerne, from the microwave radiometer at Bern and the lidar at Observatoire de Haute-Provence (OHP), and the total column data from the Dobson spectrophotometer at Arosa. Applying the optimum retrieval procedure in the broad spectral interval, an excellent agreement has been found between the FTIR O3 profile data and the correlative data. The largest offset of the FTIR data in comparison with the correlative data is found with respect to the lidar data in the 24- to 40-km layer, and is on the order of 5%. No systematic biases have been found in the troposphere, neither in the upper troposphere-lower stratosphere (UTLS) up to 18 km. The dispersion of the relative differences between the data sets, if any, is never larger than half of the natural ozone variability.

Testing low cost OEM CO2 sensors for outdoor ecological studies

NASA Astrophysics Data System (ADS)

Macintyre, C. M.; Risk, D. A.

2011-12-01

IR (Infrared) gas sensors are used extensively in CO2 research but price and power requirement often limits low-cost distributed sensing. In the past three years, sensors have been introduced to the industrial market at prices as low as $100 US for air-handling and automotive application. These inexpensive sensors are small in size, and have low power demand making them potentially ideal for low-cost distributed deployments. However, the sensors are only tested and calibrated for indoor use and for industrial standards and may not show their true potential for outdoor ecological studies. This poster summarizes the results of a sensor inter-comparison test, to document functionality, response time, electrical noise, precision, and accuracy, under varying moistures and temperatures broadly representative of a wide range of outdoor settings. The three selected sensors were placed in a closed loop system with a valving system using a LiCor Li-7000 as reference, controlled by a CR1000 datalogger that controlled CO2 and moisture concentrations content within the cell on the basis of LiCor readings. To achieve different temperatures, the tests were repeated at room temperature, inside a freezer (-18°C) and incubator (40°C). The tests involved repeatedly stepping the sensors from 2000 ppm CO2 to 400 ppm CO2 in 200 ppm or 400 ppm increments, at various moisture contents, and under the various temperature regimes. Vaisala 222 and 343 sensors were also part of the test group as comparators, as both are used widely in ecological research. The OEM sensors displayed good linearity, fast response time, and results comparable to Vaisala probes. In most cases the sensors performed beyond our expectations with notably less electrical noise than the Vaisala sensors and excellent power thriftiness. Some sensors showed better response to extreme moisture and temperature conditions. Provided that suitable protective embodiments were built around them, and that they are deployed in an environment suiting their tolerance limits, most of the tested sensors would be suitable as low-cost alternatives to sensors currently being sold for outdoor ecological studies.

A comparative analysis of passive twin tube and skyhook MRF dampers for motorcycle front suspensions

NASA Astrophysics Data System (ADS)

Ahmadian, Mehdi; Gravatt, John

2004-07-01

A comparative analysis between conventional passive twin tube dampers and skyhook-controlled magneto-rheological fluid (MRF) dampers for motorcycle front suspensions is provided, based on single axis testing in a damper test rig and suspension performance testing in road trials. Performance motorcycles, while boasting extremely light suspension components and competition-ready performance, have an inherent weakness in comfort, as the suspension systems are designed primarily for racing purposes. Front suspension acceleration and shock loading transmit directly through the front suspension triple clamp into the rider's arms and shoulders, causing rapid fatigue in shoulder muscles. Magneto-rheological fluid dampers and skyhook control systems offer an alternative to conventional sport motorcycle suspensions - both performance and comfort can be combined in the same package. Prototype MRF dampers designed and manufactured specifically for this application require no more space than conventional twin tube designs while adding only 1.7 pounds total weight to the system. The MRF dampers were designed for high controllability and low power consumption, two vital considerations for a motorcycle application. The tests conducted include the dampers' force-velocity curve testing in a damper test rig and suspension performance based on damper position, velocity, and acceleration measurement. Damper test rig results show the MRF dampers have a far greater range of adjustability than the test vehicle's OEM dampers. Combined with a modified sky-hook control system, the MRF dampers can greatly decrease the acceleration and shock loading transmitted to the rider through the handlebars while contributing performance in manners such as anti-dive under braking. Triple clamp acceleration measurements from a variety of staged road conditions, such as sinusoidal wave inputs, will be compared to subjective test-rider field reports to establish a correlation between rider fatigue and the front suspension performance. This testing will be conducted on the OEM vehicle suspension, the passive MRF dampers, and the skyhook-controlled MRF damper front suspension. The results of this test will determine the viability of skyhook-controlled MRF damper systems on motorcycles for performance gain and fatigue reduction.

Quantification Of 4H- To 3C-Polymorphism In Silicon Carbide (SiC) Epilayers And An Investigation Of Recombination-Enhanced Dislocation Motion In SiC By Optical Emission Microscopy (Oem) Techniques

NASA Technical Reports Server (NTRS)

Speer, Kevin M.

2004-01-01

Environments that impose operational constraints on conventional silicon-(Si) based semiconductor devices frequently appear in military- and space-grade applications. These constraints include high temperature, high power, and high radiation environments. Silicon carbide (SiC), an alternative type of semiconductor material, has received abundant research attention in the past few years, owing to its radiation-hardened properties as well as its capability to withstand high temperatures and power levels. However, the growth and manufacture of SiC devices is still comparatively immature, and there are severe limitations in present crystal growth and device fabrication processes. Among these limitations is a variety of crystal imperfections known as defects. These imperfections can be point defects (e.g., vacancies and interstitials), line defects (e.g., edge and screw dislocations), or planar defects (e.g., stacking faults and double-positioning boundaries). All of these defects have been experimentally shown to be detrimental to the performance of electron devices made from SiC. As such, it is imperative that these defects are significantly reduced in order for SiC devices to become a viable entity in the electronics world. The NASA Glenn High Temperature Integrated Electronics & Sensors Team (HTIES) is working to identify and eliminate these defects in SiC by implementing improved epitaxial crystal growth procedures. HTIES takes two-inch SiC wafers and etches patterns, producing thousands of mesas into each wafer. Crystal growth is then carried out on top of these mesas in an effort to produce films of improved quality-resulting in electron devices that demonstrate superior performance-as well as fabrication processes that are cost-effective, reliable, and reproducible. In this work, further steps are taken to automate HTIES' SiC wafer inspection system. National Instruments LabVIEW image processing and pattern recognition routines are developed that are capable of quantifying and mapping defects on both the substrate and mesa surfaces, and of quantifying polymorphic changes in the grown materials. In addition, an optical emission microscopy (OEM) system is developed that will facilitate comprehensive study of recombination-enhanced dislocation motion (REDM).

Can Walmart make us healthier? Prescription drug prices and health care utilization.

PubMed

Borrescio-Higa, Florencia

2015-12-01

This paper analyzes how prices in the retail pharmaceutical market affect health care utilization. Specifically, I study the impact of Walmart's $4 Prescription Drug Program on utilization of antihypertensive drugs and on hospitalizations for conditions amenable to drug therapy. Identification relies on the change in the availability of cheap drugs introduced by Walmart's program, exploiting variation in the distance to the nearest Walmart across ZIP codes in a difference-in-differences framework. I find that living close to a source of cheap drugs increases utilization of antihypertensive medications by 7 percent and decreases the probability of an avoidable hospitalization by 6.2 percent. Copyright © 2015 Elsevier B.V. All rights reserved.

Loop-mediated isothermal amplification (LAMP) shield for Arduino DNA detection.

PubMed

Velders, Aldrik H; Schoen, Cor; Saggiomo, Vittorio

2018-02-01

Loop-mediated isothermal amplification (LAMP) of DNA is gaining relevance as a method to detect nucleic acids, as it is easier, faster, and more powerful than conventional Polymerase Chain Reaction. However, LAMP is still mostly used in laboratory settings, because of the lack of a cheap and easy, one-button device that can perform LAMP experiments. Here we show how to build and program an Arduino shield for a LAMP and detection of DNA. The here described Arduino Shield is cheap, easy to assemble, to program and use, it is battery operated and the detection of DNA is done by naked-eye so that it can be used in field.

Low-Cost Photogrammetric Technique Used to Measure Dome Growth at Mount St. Helens Volcano, 2007-2007

NASA Astrophysics Data System (ADS)

Diefenbach, A. K.; Crider, J. G.; Schilling, S. P.; Dzurisin, D.

2007-12-01

We describe a low-cost application of digital photogrammetry using commercial grade software, an off-the-shelf digital camera, a laptop computer and oblique photographs to reconstruct volcanic dome morphology during the on-going eruption at Mount St. Helens, Washington. Renewed activity at Mount St. Helens provides a rare opportunity to devise and test new methods for better understanding and predicting volcanic events, because the new method can be validated against other observations on this well-instrumented volcano. Uncalibrated, oblique aerial photographs (snap shots) taken from a helicopter are the raw data. Twelve sets of overlapping digital images of the dome taken during 2004-2007 were used to produce digital elevation models (DEMs) from which dome height, eruption volume and extrusion rate can be derived. Analyses of the digital images were carried out using PhotoModeler software, which produces three dimensional coordinates of points identified in multiple photos. The steps involved include: (1) calibrating the digital camera using this software package, (2) establishing control points derived from existing DEMs, (3) identifying tie points located in each photo of any given model date, and (4) identifying points in pairs of photos to build a three dimensional model of the evolving dome at each photo date. Text files of three-dimensional points encompassing the dome at each date were imported into ArcGIS and three-dimensional models (triangulated irregular network or TINs) were generated. TINs were then converted to 2 m raster DEMs. The evolving morphology of the growing dome was modeled by comparison of successive DEMs. The volume of extruded lava visible in each DEM was calculated using the 1986 pre-eruption crater floor topography as a basal surface. Results were validated by comparing volume measurements derived from traditional aerophotogrammetric surveys run by the USGS Cascades Volcano Observatory. Our new "quick and cheap" technique yields estimates of eruptive volume consistently within 5% of the volumes estimated with traditional surveys. The end result of this project is a new technique that provides an inexpensive, rapid assessment tool for tracking lava dome growth or other topographic changes at restless volcanoes.

A cheap minimally painful and widely usable alternative for retrieving ureteral stents.

PubMed

Söylemez, Haluk; Sancaktutar, Ahmet Ali; Bozkurt, Yaşar; Atar, Murat; Penbegül, Necmettin; Yildirim, Kadir

2011-01-01

To describe a cheap, minimally painful and widely usable method for retrieving ureteral stents by using an ureteroscope. Sixty-seven patients with ureteral stents were enrolled in this study. The patients were randomized into a cystoscopic (35 patients) and a ureteroscopic (32 patients) group. All stents were retrieved by a flexible cystoscope in the first group and by a ureteroscope in the second group under local anesthesia. Patients in each group were assessed for stented time, stent side, cause of stent placement, operative time, peroperative pain, postoperative pain, irritative voiding symptoms and hematuria. Also costs of instruments were calculated. Stents were successfully retrieved in 67 patients. There were no statistical differences in the two groups regarding patient gender and age or stent side, operative time, stented time, mean operative pain score, irritative voiding symptom scores and hematuria. Total selling price was USD 20.399 for flexible instruments and USD 10.516 for rigid ones. Total maintenance price was higher in flexible instruments than in the rigid ones (USD 197.8 and 51.7 per use, respectively). Ureteroscopic stent retrieval is a minimally painful, safe and highly tolerable method under local anesthesia as well as flexible cystoscopic retrieval. Also, it is a cheap and widely usable method. Copyright © 2011 S. Karger AG, Basel.

Costs and constraints conspire to produce honest signaling: insights from an ant queen pheromone.

PubMed

Holman, Luke

2012-07-01

Signal costs and evolutionary constraints have both been proposed as ultimate explanations for the ubiquity of honest signaling, but the interface between these two factors is unclear. Here, I propose a pluralistic interpretation, and use game theory to demonstrate that evolutionary constraints determine whether signals evolve to be costly or cheap. Specifically, when the costs or benefits of signaling are strongly influenced by the sender's quality, low-cost signals evolve. The model reaffirms that cheap and costly signals can both be honest, and predicts that expensive signals should have more positive allometric slopes than cheap ones. The new framework is applied to an experimental study of an ant queen pheromone that honestly signals fecundity. Juvenile hormone was found to have opposing, dose-dependent effects on pheromone production and fecundity and was fatal at high doses, indicating that endocrine-mediated trade-offs preclude dishonesty. Several lines of evidence suggest that the realized cost of pheromone production may be nontrivial, and the antagonistic effects of juvenile hormone indicate the presence of significant evolutionary constraints. I conclude that the honesty of queen pheromones and other signals is likely enforced by both the cost of dishonesty and a suite of evolutionary constraints. © 2012 The Author(s).

Tupelo Says Goodbye to Cheap Power.

ERIC Educational Resources Information Center

American School and University, 1981

1981-01-01

Increasing hydroelectric costs jolted the Tupelo (Mississippi) School District into an energy conservation program. Corrective measures have kept operating cost increases within 10 percent. (Author/MLF)

CIAGENT

EPA Pesticide Factsheets

Technical product bulletin: formerly CHEAP INSURANCE, PETRO-CAPTURE, this miscellaneous oil spill control agent used in cleanups encapsulates and solidifies oil, remaining buoyant. Also available in oil absorbent, water repellant booms and pillows.

A highly sensitive detection of chloramphenicol based on chemiluminescence immunoassays with the cheap functionalized Fe3 O4 @SiO2 magnetic nanoparticles.

PubMed

Linyu, Wang; Manwen, Yao; Chengzhi, Fang; Xi, Yao

2017-09-01

A strategy has been applied to chloramphenicol (CAP) detection with chemiluminescence immunoassays (CLIA) based on cheap functionalized Fe 3 O 4 @SiO 2 magnetic nanoparticles (Fe-MNPs). The strategy that bovine serum albumin (BSA) was immobilized on cheap functionalized Fe-MNPs and that the CAP molecules were then immobilized on BSA, avoided the long process of dialysis for preparation of the BSA-CAP conjugates. The samples were detected for both methods that utilized two different kinds of functionalized Fe-MNPs (amine-functionalized Fe 3 O 4 @SiO 2 and carboxylic acid-functionalized Fe 3 O 4 @SiO 2 ). The sensitivities and limits of detection (LODs) of the two methods were obtained and compared based on inhibition curves. The 50% inhibition concentrations (IC 50 ) values of the two methods were about 0.024 ng ml -1 and 0.046 ng ml -1 respectively and LODs were approximately 0.0002 ng ml -1 and 0.001 ng ml -1 respectively. These methods were much more sensitive than that of any traditional enzyme-linked immunosorbent assay (ELISA) previously reported. Therefore, such chemiluminescence methods could be easily adapted for small molecule detection in a variety of foods using Fe-MNPs. Copyright © 2017 John Wiley & Sons, Ltd.

Drugs Cheaper Than Threepenny: The Market of Extremely Low-Priced Drugs within the National Health Insurance in Taiwan

PubMed Central

Chou, Li-Fang

2014-01-01

While most drug policy researches paid attention to the financial impact of expensive drugs, the market situation of low-priced drugs in a country was seldom analyzed. We used the nationally representative claims datasets to explore the status within the National Health Insurance (NHI) in Taiwan. In 2007, a total of 12,443 distinct drug items had been prescribed 853,250,147 times with total expenditure of 105,216,950,198 new Taiwan dollars (NTD). Among them, 7,366 oral drug items accounted for 701,353,383 prescribed items and 68,133,988,960 NTD. Besides, 2,887 items (39.2% of oral drug items) belonged to cheap drugs with the unit price ≤1 NTD (about 0.03 of US dollar). While the top one item among all oral drugs had already a market share of 5.0%, 30 items 30.3% and 107 items 50.0%, the cheap drugs with aggregate 332,893,462 prescribed items (47.5% of all prescribed oral drug items) only accounted for 2,750,725,433 NTD (4.0% of expenditure for oral drugs and 2.6% of total drug expenditure). The drug market of Taiwan's NHI was abundant in cheap drugs. The unreasonably low prices of drugs might not guarantee the quality of pharmaceutical care and the sustainability of a healthy pharmaceutical industry in the long run. PMID:24719568

Optimization of water absorbing exopolysaccharide production on local cheap substrates by Bacillus strain CMG1403 using one variable at a time approach.

PubMed

Muhammadi; Afzal, Muhammad

2014-01-01

Optimum culture conditions, and carbon and nitrogen sources for production of water absorbing exopolysaccharide by Bacillus strain CMG1403 on local cheap substrates were determined using one variable at a time approach. Carbon source was found to be sole substrate for EPS biosynthesis in the presence of yeast extract that supported the growth only and hence, indirectly enhanced the EPS yield. Whereas, urea only coupled with carbon source could enhance the EPS production but no effect on growth. The maximum yield of EPS was obtained when Bacillus strain CMG1403 was grown statically in neutral minimal medium with 25% volumetric aeration at 30°C for 10 days. Under these optimum conditions, a maximum yield of 2.71±0.024, 3.82±0.005, 4.33±0.021, 4.73±0.021, 4.85±0.024, and 5.52±0.016 g/L culture medium was obtained with 20 g (sugar) of sweet whey, glucose, fructose, sucrose, cane molasses and sugar beet the most efficient one respectively as carbon sources. Thus, the present study showed that under optimum culture conditions, the local cheap substrates could be superior and efficient alternatives to synthetic carbon sources providing way for an economical production of water absorbing EPS by indigenous soil bacterium Bacillus strain CMG1403.

Drugs cheaper than threepenny: the market of extremely low-priced drugs within the National Health Insurance in Taiwan.

PubMed

Wang, Bih-Ru; Chou, Chia-Lin; Hsu, Chia-Chen; Chou, Yueh-Ching; Chen, Tzeng-Ji; Chou, Li-Fang

2014-01-01

While most drug policy researches paid attention to the financial impact of expensive drugs, the market situation of low-priced drugs in a country was seldom analyzed. We used the nationally representative claims datasets to explore the status within the National Health Insurance (NHI) in Taiwan. In 2007, a total of 12,443 distinct drug items had been prescribed 853,250,147 times with total expenditure of 105,216,950,198 new Taiwan dollars (NTD). Among them, 7,366 oral drug items accounted for 701,353,383 prescribed items and 68,133,988,960 NTD. Besides, 2,887 items (39.2% of oral drug items) belonged to cheap drugs with the unit price ≤ 1 NTD (about 0.03 of US dollar). While the top one item among all oral drugs had already a market share of 5.0%, 30 items 30.3% and 107 items 50.0%, the cheap drugs with aggregate 332,893,462 prescribed items (47.5% of all prescribed oral drug items) only accounted for 2,750,725,433 NTD (4.0% of expenditure for oral drugs and 2.6% of total drug expenditure). The drug market of Taiwan's NHI was abundant in cheap drugs. The unreasonably low prices of drugs might not guarantee the quality of pharmaceutical care and the sustainability of a healthy pharmaceutical industry in the long run.

Introducing students to digital geological mapping: A workflow based on cheap hardware and free software

NASA Astrophysics Data System (ADS)

Vrabec, Marko; Dolžan, Erazem

2016-04-01

The undergraduate field course in Geological Mapping at the University of Ljubljana involves 20-40 students per year, which precludes the use of specialized rugged digital field equipment as the costs would be way beyond the capabilities of the Department. A different mapping area is selected each year with the aim to provide typical conditions that a professional geologist might encounter when doing fieldwork in Slovenia, which includes rugged relief, dense tree cover, and moderately-well- to poorly-exposed bedrock due to vegetation and urbanization. It is therefore mandatory that the digital tools and workflows are combined with classical methods of fieldwork, since, for example, full-time precise GNSS positioning is not viable under such circumstances. Additionally, due to the prevailing combination of complex geological structure with generally poor exposure, students cannot be expected to produce line (vector) maps of geological contacts on the go, so there is no need for such functionality in hardware and software that we use in the field. Our workflow therefore still relies on paper base maps, but is strongly complemented with digital tools to provide robust positioning, track recording, and acquisition of various point-based data. Primary field hardware are students' Android-based smartphones and optionally tablets. For our purposes, the built-in GNSS chips provide adequate positioning precision most of the time, particularly if they are GLONASS-capable. We use Oruxmaps, a powerful free offline map viewer for the Android platform, which facilitates the use of custom-made geopositioned maps. For digital base maps, which we prepare in free Windows QGIS software, we use scanned topographic maps provided by the National Geodetic Authority, but also other maps such as aerial imagery, processed Digital Elevation Models, scans of existing geological maps, etc. Point data, like important outcrop locations or structural measurements, are entered into Oruxmaps as waypoints. Students are also encouraged to directly measure structural data with specialized Android apps such as the MVE FieldMove Clino. Digital field data is exported from Oruxmaps to Windows computers primarily in the ubiquitous GPX data format and then integrated in the QGIS environment. Recorded GPX tracks are also used with the free Geosetter Windows software to geoposition and tag any digital photographs taken in the field. With minimal expenses, our workflow provides the students with basic familiarity and experience in using digital field tools and methods. The workflow is also practical enough for the prevailing field conditions of Slovenia that the faculty staff is using it in geological mapping for scientific research and consultancy work.

Web conferencing systems: Skype and MSN in telepathology

PubMed Central

Klock, Clóvis; Gomes, Regina de Paula Xavier

2008-01-01

Virtual pathology is a very important tool that can be used in several ways, including interconsultations with specialists in many areas and for frozen sections. We considered in this work the use of Windows Live Messenger and Skype for image transmission. The conference was made through wide broad internet using Nikon E 200 microscope and Digital Samsung Colour SCC-131 camera. Internet speed for transmission varied from 400 Kb to 2.0 Mb. Both programs allow voice transmission concomitant to image, so the communication between the involved pathologists was possible using microphones and speakers. Alive image could be seen by the receptor pathologist who was able to ask for moving the field or increase/diminish the augmentation. No phone call or typing required. The programs MSN and Skype can be used in many ways and with different operational systems installed in the computer. The capture system is simple and relatively cheap, what proves the viability of the system to be used in developing countries and in cities where do not exist pathologists. With the improvement of software and the improvement of digital image quality, associated to the use of the high speed broad band Internet this will be able to become a new modality in surgical pathology. PMID:18673501

Web conferencing systems: Skype and MSN in telepathology.

PubMed

Klock, Clóvis; Gomes, Regina de Paula Xavier

2008-07-15

Virtual pathology is a very important tool that can be used in several ways, including interconsultations with specialists in many areas and for frozen sections. We considered in this work the use of Windows Live Messenger and Skype for image transmission. The conference was made through wide broad internet using Nikon E 200 microscope and Digital Samsung Colour SCC-131 camera. Internet speed for transmission varied from 400 Kb to 2.0 Mb. Both programs allow voice transmission concomitant to image, so the communication between the involved pathologists was possible using microphones and speakers. A live image could be seen by the receptor pathologist who was able to ask for moving the field or increase/diminish the augmentation. No phone call or typing required. The programs MSN and Skype can be used in many ways and with different operational systems installed in the computer. The capture system is simple and relatively cheap, what proves the viability of the system to be used in developing countries and in cities where do not exist pathologists. With the improvement of software and the improvement of digital image quality, associated to the use of the high speed broad band Internet this will be able to become a new modality in surgical pathology.

Evaluation of AgNORs in Oral Potentially Malignant Lesions.

PubMed

Tomazelli, Karin Berria; Modolo, Filipe; Rivero, Elena Riet Correa

2015-01-01

Oral squamous cell carcinoma (OSCC) is usually preceded by detectable mucosal changes, as leukoplakias and erythroplakia. Histologically, these lesions can range from hyperkeratosis and acanthosis to epithelial dysplasia and even OSCC. The aim of this study was to investigate the proliferative activity, using AgNORs quantification proteins, in low- and high-risk oral epithelial dysplasia, OSCC, and nondysplastic epithelium (inflammatory fibrous hyperplasia). The sample was divided into 4 groups: G1: 10 cases of inflammatory fibrous hyperplasia (IFH), G2: 11 cases of low-risk epithelial dysplasia (LD), G3: 10 cases of high-risk epithelial dysplasia (HD), and G4: 11 cases of OSCC. The quantitative analysis was performed using an image processing software in photomicrographs at 1000x magnification. The one-way ANOVA was used for comparison of the mean AgNORs counts between the study groups. The mean AgNORs count was significantly higher (P ≤ 0.01) in OSCC when compared to IFH and the LD; however, it was not statistically different from HD. The mean number of LD was significantly lower than the HD and OSCC, with no difference related to IFH. AgNORs quantification can be an important and cheap method to help in the determination of the degree of epithelial dysplasia and, consequently, in the analysis of their potential for malignant transformation.

The impact of teaching psychological welfare on marital satisfaction and self-efficacy in nurses

PubMed Central

Sabzianpoor, B; Ghazanfari Amrai, M; Jalali Farahani, M; Soheila, R; Mahdavi, A; Rahmani, S

2015-01-01

Objective: Proper psychological interventions for enhancing public health and mental welfare in nurses are of great importance. This study intended to explore the influence of the teaching psychological welfare on marital satisfaction and self-efficacy in nurses of Imam Khomeini hospital. Methodology: The method of the present study was semi-experimental with a pre-test post-test design and a control group. Hence, 24 nurses were selected from Imam Khomeini hospital, by using convenience sampling, and they were divided into two groups: experiment and monitoring. By using a 47-questions marital satisfaction questionnaire and a 17-questions general self-efficacy questionnaire, both groups were pre-tested. Then the test group, received lessons on psychological welfare within ten sessions, but the control group received no interventions. Afterwards, both groups were post-tested, and the data collected were analyzed by using descriptive and inferential statistics methods through SPSS software. Findings: Findings showed that teaching psychological welfare significantly increased marital satisfaction and self-efficacy in nurses (p < 0.001). Conclusion: From this research, it was concluded that teaching psychological welfare is an effective strategy for those with risky jobs like nurses, because it is highly efficient, especially when it is performed in groups, because it is cheap, and because it is acceptable by different working people. PMID:28316749

Constituting fully integrated visual analysis system for Cu(II) on TiO₂/cellulose paper.

PubMed

Li, Shun-Xing; Lin, Xiaofeng; Zheng, Feng-Ying; Liang, Wenjie; Zhong, Yanxue; Cai, Jiabai

2014-07-15

As a cheap and abundant porous material, cellulose filter paper was used to immobilize nano-TiO2 and denoted as TiO2/cellulose paper (TCP). With high adsorption capacity for Cu(II) (more than 1.65 mg), TCP was used as an adsorbent, photocatalyst, and colorimetric sensor at the same time. Under the optimum adsorption conditions, i.e., pH 6.5 and 25 °C, the adsorption ratio of Cu(II) was higher than 96.1%. Humic substances from the matrix could be enriched onto TCP but the interference of their colors on colorimetric detection could be eliminated by the photodegradation. In the presence of hydroxylamine, neocuproine, as a selective indicator, was added onto TCP, and a visual color change from white to orange was generated. The concentration of Cu(II) was quantified by the color intensity images using image processing software. This fully integrated visual analysis system was successfully applied for the detection of Cu(II) in 10.0 L of drinking water and seawater with a preconcentration factor of 10(4). The log-linear calibration curve for Cu(II) was in the range of 0.5-50.0 μg L(-1) with a determination coefficient (R(2)) of 0.985 and its detection limit was 0.073 μg L(-1).

VRLane: a desktop virtual safety management program for underground coal mine

NASA Astrophysics Data System (ADS)

Li, Mei; Chen, Jingzhu; Xiong, Wei; Zhang, Pengpeng; Wu, Daozheng

2008-10-01

VR technologies, which generate immersive, interactive, and three-dimensional (3D) environments, are seldom applied to coal mine safety work management. In this paper, a new method that combined the VR technologies with underground mine safety management system was explored. A desktop virtual safety management program for underground coal mine, called VRLane, was developed. The paper mainly concerned about the current research advance in VR, system design, key techniques and system application. Two important techniques were introduced in the paper. Firstly, an algorithm was designed and implemented, with which the 3D laneway models and equipment models can be built on the basis of the latest mine 2D drawings automatically, whereas common VR programs established 3D environment by using 3DS Max or the other 3D modeling software packages with which laneway models were built manually and laboriously. Secondly, VRLane realized system integration with underground industrial automation. VRLane not only described a realistic 3D laneway environment, but also described the status of the coal mining, with functions of displaying the run states and related parameters of equipment, per-alarming the abnormal mining events, and animating mine cars, mine workers, or long-wall shearers. The system, with advantages of cheap, dynamic, easy to maintenance, provided a useful tool for safety production management in coal mine.

The path to VICTORy - a beginner's guide to success using commercial research antibodies.

PubMed

Goodman, Simon L

2018-05-15

Commercial research antibodies are crucial tools in modern cell biology and biochemistry. In the USA some $2 billion a year are spent on them, but many are apparently not fit-for-purpose, and this may contribute to the 'reproducibility crisis' in biological sciences. Inadequate antibody validation and characterization, lack of user awareness, and occasional incompetence amongst suppliers have had immense scientific and personal costs. In this Opinion, I suggest some paths to make the use of these vital tools more successful. I have attempted to summarize and extend expert views from the literature to suggest that sustained routine efforts should made in: (1) the validation of antibodies, (2) their identification, (3) communication and controls, (4) the training of potential users, (5) the transparency of original equipment manufacturer (OEM) marketing agreements, and (5) in a more widespread use of recombinant antibodies (together denoted the 'VICTOR' approach). © 2018. Published by The Company of Biologists Ltd.

An Organizational Knowledge Ontology for Automotive Supply Chains

NASA Astrophysics Data System (ADS)

Hellingrath, Bernd; Witthaut, Markus; Böhle, Carsten; Brügger, Stephan

The currently completed ILIPT (Intelligent Logistics for Innovative Product Technologies) project was concerned with the concept of the “5 day car” (a customized car that is delivered within five days after its ordering) and encompassed extensive research on the required production and logistics network structures and processes. As car manufacturers in the automotive industry (commonly referred to as OEMs) rely heavily on their suppliers, the major challenge lies in the organization of inter-enterprise cooperation supported by information systems (IS) in an efficient manner. A common understanding of supply chain concepts is indispensable for this. Ontologies as formal representations of concepts can be used as a semantic basis for cooperation. Relevant results from ILIPT are presented followed by a concept as well as a prototype of how to transfer the theoretical findings to a practical implementation, in this case a multi-agent system.

Cirrus Heterogeneity Effects on Cloud Optical Properties Retrieved with an Optimal Estimation Method from MODIS VIS to TIR Channels.

NASA Technical Reports Server (NTRS)

Fauchez, T.; Platnick, S.; Meyer, K.; Sourdeval, O.; Cornet, C.; Zhang, Z.; Szczap, F.

2016-01-01

This study presents preliminary results on the effect of cirrus heterogeneities on top-of-atmosphere (TOA) simulated radiances or reflectances for MODIS channels centered at 0.86, 2.21, 8.56, 11.01 and 12.03 micrometers , and on cloud optical properties retrieved with a research-level optimal estimation method (OEM). Synthetic cirrus cloud fields are generated using a 3D cloud generator (3DCLOUD) and radiances/reflectances are simulated using a 3D radiative transfer code (3DMCPOL). We find significant differences between the heterogeneity effects on either visible and near-infrared (VNIR) or thermal infrared (TIR) radiances. However, when both wavelength ranges are combined, heterogeneity effects are dominated by the VNIR horizontal radiative transport effect. As a result, small optical thicknesses are overestimated and large ones are underestimated. Retrieved effective diameter are found to be slightly affected, contrarily to retrievals using TIR channels only.

Summary of OEM Idling Recommendations from Vehicle Owner's Manuals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keel-Blackmon, Kristy; Curran, Scott; Lapsa, Melissa Voss

The project upon which this report is based was conceived in 2012 during discussions between the East Tennessee Clean Fuels Coalition (ETCleanFuels) and Oak Ridge National Laboratory (ORNL) who both noted that a detailed summary of idling recommendations for a wide variety of engines and vehicles were not available in the literature. The two organizations agreed that ETCleanFuels would develop a first-of-its-kind collection of idling recommendations from the owner’s manuals of modern production vehicles. Vehicle engine idling, a subject that has long been debated, is largely shrouded in misinformation. The justifications for idling seem to be many: driver comfort, waitingmore » in lines, and talking on cell phones to name a few. Assuredly, a great number of people idle because of the myths and misinformation surrounding this issue. This report addresses these myths by turning to statements taken directly from the automobile and engine manufacturers themselves.« less

Magneto-rheological fluid shock absorbers for HMMWV

NASA Astrophysics Data System (ADS)

Gordaninejad, Faramarz; Kelso, Shawn P.

2000-04-01

This paper presents the development and evaluation of a controllable, semi-active magneto-rheological fluid (MRF) shock absorber for a High Mobility Multi-purpose Wheeled Vehicle (HMMWV). The University of Nevada, Reno (UNR) MRF damper is tailored for structures and ground vehicles that undergo a wide range of dynamic loading. It also has the capability for unique rebound and compression characteristics. The new MRF shock absorber emulates the original equipment manufacturer (OEM) shock absorber behavior in passive mode, and provides a wide controllable damping force range. A theoretical study is performed to evaluate the UNR MRF shock absorber. The Bingham plastic theory is employed to model the nonlinear behavior of the MR fluid. A fluid-mechanics-based theoretical model along with a three-dimensional finite element electromagnetic analysis is utilized to predict the MRF damper performance. The theoretical results are compared with experimental data and are demonstrated to be in excellent agreement.

Cigarette Prices in Military Retail: A Review and Proposal for Advancing Military Health Policy

PubMed Central

Haddock, Christopher K.; Jahnke, Sara A.; Poston, Walker S.C.; Williams, Larry N.

2013-01-01

Tobacco use is the leading cause of preventable death in the United States (US) and has been demonstrated to significantly harm the combat readiness of military personnel. Unfortunately, recent research demonstrated that cigarettes are sold at substantial discounts in military retail outlets. In fact, the military is the only retailer which consistently loses money on tobacco. Cheap tobacco prices have been identified by enlisted personnel and Department of Defense health policy experts as promoting a culture of tobacco use in the US Military. This paper provides an analysis of why current military tobacco pricing policy has failed to eliminate cheap tobacco prices as an incentive for use. A rationale for increasing tobacco prices also is presented along with recommendations for improved military tobacco control policy. PMID:23756017

An efficient solid modeling system based on a hand-held 3D laser scan device

NASA Astrophysics Data System (ADS)

Xiong, Hanwei; Xu, Jun; Xu, Chenxi; Pan, Ming

2014-12-01

The hand-held 3D laser scanner sold in the market is appealing for its port and convenient to use, but price is expensive. To develop such a system based cheap devices using the same principles as the commercial systems is impossible. In this paper, a simple hand-held 3D laser scanner is developed based on a volume reconstruction method using cheap devices. Unlike convenient laser scanner to collect point cloud of an object surface, the proposed method only scan few key profile curves on the surface. Planar section curve network can be generated from these profile curves to construct a volume model of the object. The details of design are presented, and illustrated by the example of a complex shaped object.

Automatic readout for nuclear emulsions in muon radiography of volcanoes

NASA Astrophysics Data System (ADS)

Aleksandrov, A.; Bozza, C.; Consiglio, L.; D'Ambrosio, N.; De Lellis, G.; Di Crescenzo, A.; Di Marco, N.; Kose, U.; Lauria, A.; Medinaceli, E.; Miyamoto, S.; Montesi, C.; Pupilli, F.; Rescigno, R.; Russo, A.; Sirignano, C.; Stellacci, S. M.; Strolin, P.; Tioukov, V.

2012-04-01

Nuclear emulsions are an effective choice in many scenarios of volcano radiography by cosmic-ray muons. They are cheap and emulsion-based detectors require no on-site power supply. Nuclear emulsion films provide sub-micrometric tracking precision and intrinsic angular accuracy better than 1 mrad. Imaging the inner structure of a volcano requires that the cosmic-ray absorption map be measured on wide angular range. High-absorption directions can be probed by allowing for large statistics, which implies a large overall flux, i.e. wide surface for the detector. A total area of the order of a few m2 is nowadays typical, thanks to the automatic readout tools originally developed for high-energy physics experiments such as CHORUS, PEANUT, OPERA. The European Scanning System is now being used to read out nuclear emulsion films exposed to cosmic rays on the side of volcanoes. The structure of the system is described in detail with respect to both hardware and software. Its present scanning speed of 20 cm2/h/side/microscope is suitable to fulfil the needs of the current exposures of nuclear emulsion films for muon radiograph, but it is worth to notice that applications in volcano imaging are among the driving forces pushing to increase the performances of the system. Preliminary results for the Unzen volcano of a joint effort by research groups in Italy and Japan show that the current system is already able to provide signal/background ratio in the range 100÷10000:1, depending on the quality cuts set in the off-line data analysis. The size of the smallest detectable structures in that experimental setup is constrained by the available statistics in the region of highest absorption to about 50 mrad, or 22 m under the top of the mountain. Another exposure is currently taking data at the Stromboli volcano. Readout of the exposed films is expected to begin in March 2012, and preliminary results will be available soon after. An effort by several universities and INFN has already started to increase the scanning speed, to exceed 100 cm2/h and approach the order of magnitude of 1000 cm2/h. Muon radiography also demands high signal/background ratio to probe high absorption regions in volcanoes. A new camera, a new image acquisition device, an improved motion control board and extensive use of GPU-based processing are the keys to make a new leap in speed while even improving data quality. With most of the new hardware already finalised, software development is quickly progressing, and a stable, user-friendly and cheap prototype is expected to be ready to take data already this summer. The amount of raw data collected is typically of the order of 10 TB/m2. The operation of automatic microscopes is thus complemented with an automatic data management and processing system based on a distributed computing model. The processing power can be scaled up linearly by just increasing the number of available computers. An evolution is underway on this side too, and algorithms designed for GPU-based processing will soon help increase the available power while decreasing the overall cost of typical installations.

Ground-based lidar and microwave radiometry synergy for high vertical resolution absolute humidity profiling

NASA Astrophysics Data System (ADS)

Barrera-Verdejo, María; Crewell, Susanne; Löhnert, Ulrich; Orlandi, Emiliano; Di Girolamo, Paolo

2016-08-01

Continuous monitoring of atmospheric humidity profiles is important for many applications, e.g., assessment of atmospheric stability and cloud formation. Nowadays there are a wide variety of ground-based sensors for atmospheric humidity profiling. Unfortunately there is no single instrument able to provide a measurement with complete vertical coverage, high vertical and temporal resolution and good performance under all weather conditions, simultaneously. For example, Raman lidar (RL) measurements can provide water vapor with a high vertical resolution, albeit with limited vertical coverage, due to sunlight contamination and the presence of clouds. Microwave radiometers (MWRs) receive water vapor information throughout the troposphere, though their vertical resolution is poor. In this work, we present an MWR and RL system synergy, which aims to overcome the specific sensor limitations. The retrieval algorithm combining these two instruments is an optimal estimation method (OEM), which allows for an uncertainty analysis of the retrieved profiles. The OEM combines measurements and a priori information, taking the uncertainty of both into account. The measurement vector consists of a set of MWR brightness temperatures and RL water vapor profiles. The method is applied to a 2-month field campaign around Jülich (Germany), focusing on clear sky periods. Different experiments are performed to analyze the improvements achieved via the synergy compared to the individual retrievals. When applying the combined retrieval, on average the theoretically determined absolute humidity uncertainty is reduced above the last usable lidar range by a factor of ˜ 2 with respect to the case where only RL measurements are used. The analysis in terms of degrees of freedom per signal reveal that most information is gained above the usable lidar range, especially important during daytime when the lidar vertical coverage is limited. The retrieved profiles are further evaluated using radiosounding and Global Position Satellite (GPS) water vapor measurements. In general, the benefit of the sensor combination is especially strong in regions where Raman lidar data are not available (i.e., blind regions, regions characterized by low signal-to-noise ratio), whereas if both instruments are available, RL dominates the retrieval. In the future, the method will be extended to cloudy conditions, when the impact of the MWR becomes stronger.

Summary of High-Octane Mid-Level Ethanol Blends Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Theiss, Timothy J.; Alleman, Teresa; Brooker, Aaron

Original equipment manufacturers (OEMs) of light-duty vehicles are pursuing a broad portfolio of technologies to reduce CO 2 emissions and improve fuel economy. Central to this effort is higher efficiency spark ignition (SI) engines, including technologies reliant on higher compression ratios and fuels with improved anti-knock properties, such as gasoline with significantly increased octane numbers. Ethanol has an inherently high octane number and would be an ideal octane booster for lower-octane petroleum blendstocks. In fact, recently published data from Department of Energy (DOE) national laboratories (Splitter and Szybist, 2014a, 2014b; Szybist, 2010; Szybist and West, 2013) and OEMs (Anderson, 2013)more » and discussions with the U.S. Environmental Protection Agency (EPA) suggest the potential of a new high octane fuel (HOF) with 25–40 vol % of ethanol to assist in reaching Renewable Fuel Standard (RFS2) and greenhouse gas (GHG) emissions goals. This mid-level ethanol content fuel, with a research octane number (RON) of about 100, appears to enable efficiency improvements in a suitably calibrated and designed engine/vehicle system that are sufficient to offset its lower energy density (Jung, 2013; Thomas, et al, 2015). This efficiency improvement would offset the tank mileage (range) loss typically seen for ethanol blends in conventional gasoline and flexible-fuel vehicles (FFVs). The prospects for such a fuel are additionally attractive because it can be used legally in over 18 million FFVs currently on the road. Thus the legacy FFV fleet can serve as a bridge by providing a market for the new fuel immediately, so that future vehicles will have improved efficiency as the new fuel becomes widespread. In this way, HOF can simultaneously help improve fuel economy while expanding the ethanol market in the United States via a growing market for an ethanol blend higher than E10. The DOE Bioenergy Technologies Office initiated a collaborative research program between Oak Ridge National Laboratory (ORNL), the National Renewable Energy Laboratory (NREL), and Argonne National Laboratory (ANL) to investigate HOF in late 2013. The program objective was to provide a quantitative picture of the barriers to adoption of HOF and the highly efficient vehicles it enables, and to quantify the potential environmental and economic benefits of the technology.« less

Next Generation Waste Tracking: Linking Legacy Systems with Modern Networking Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, Randy M.; Resseguie, David R.; Shankar, Mallikarjun

2010-01-01

This report describes results from a preliminary analysis to satisfy the Department of Energy (DOE) objective to ensure the safe, secure, efficient packaging and transportation of materials both hazardous and non hazardous [1, 2]. The DOE Office of Environmental Management (OEM) through Oak Ridge National Laboratory (ORNL) has embarked on a project to further this objective. OEM and ORNL have agreed to develop, demonstrate and make available modern day cost effective technologies for characterization, identification, tracking, monitoring and disposal of radioactive waste when transported by, or between, motor, air, rail, and water modes. During the past 8 years ORNL hasmore » investigated and deployed Web 2.0 compliant sensors into the transportation segment of the supply chain. ORNL has recently demonstrated operational experience with DOE Oak Ridge Operations Office (ORO) and others in national test beds and applications within this domain of the supply chain. Furthermore, in addition to DOE, these hazardous materials supply chain partners included Federal and State enforcement agencies, international ports, and commercial sector shipping operations in a hazardous/radioactive materials tracking and monitoring program called IntelligentFreight. IntelligentFreight is an ORNL initiative encompassing 5 years of research effort associated with the supply chain. The ongoing ORNL SmartFreight programs include RadSTraM [3], GRadSTraM , Trusted Corridors, SensorPedia [4], SensorNet, Southeastern Transportation Corridor Pilot (SETCP) and Trade Data Exchange [5]. The integration of multiple technologies aimed at safer more secure conveyance has been investigated with the core research question being focused on testing distinctly different distributed supply chain information sharing systems. ORNL with support from ORO have demonstrated capabilities when transporting Environmental Management (EM) waste materials for disposal over an onsite haul road. ORNL has unified the operations of existing legacy hazardous, radioactive and related informational databases and systems using emerging Web 2.0 technologies. These capabilities were used to interoperate ORNL s waste generating, packaging, transportation and disposal with other DOE ORO waste management contractors. Importantly, the DOE EM objectives were accomplished in a cost effective manner without altering existing information systems. A path forward is to demonstrate and share these technologies with DOE EM, contractors and stakeholders. This approach will not alter existing DOE assets, i.e. Automated Traffic Management Systems (ATMS), Transportation Tracking and Communications System (TRANSCOM), the Argonne National Laboratory (ANL) demonstrated package tracking system, etc« less

Greener and cheaper

NASA Astrophysics Data System (ADS)

Shen, Laifa; Yu, Yan

2017-11-01

Using cheap organic material as the cathode and abundant sodium as the charge carrier is attractive for sustainable battery technologies. Now, highly reversible four-sodium storage in a nano-sized disodium rhodizonate organic cathode is achieved.

Infrared Analysis Using Tissue Paper.

ERIC Educational Resources Information Center

Owen, Noel L.; Wood, Steven G.

1987-01-01

Described is a quick, easy, and cheap, but effective method of obtaining infrared spectra of solids and nonvolatile liquids by Fourier transform infrared spectroscopy. The technique uses tissue paper as a support matrix. (RH)

The road ahead

NASA Astrophysics Data System (ADS)

2010-10-01

From breathless early excitement at an energy source that could be "too cheap to meter" to the fear and suspicion following the accidents at Three Mile Island and Chernobyl, nuclear power has always aroused strong feelings.

Bootstrapping a Sustainable North American PEM Fuel Cell Industry: Could a Federal Acquisition Program Make a Difference?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greene, David L; Duleep, Dr. K. G.

2008-10-01

The North American Proton Exchange Membrane (PEM) fuel cell industry may be at a critical juncture. A large-scale market for automotive fuel cells appears to be several years away and in any case will require a long-term, coordinated commitment by government and industry to insure the co-evolution of hydrogen infrastructure and fuel cell vehicles (Greene et al., 2008). The market for non-automotive PEM fuel cells, on the other hand, may be much closer to commercial viability (Stone, 2006). Cost targets are less demanding and manufacturers appear to be close, perhaps within a factor of two, of meeting them. Hydrogen supplymore » is a significant obstacle to market acceptance but may not be as great a barrier as it is for hydrogen-powered vehicles due to the smaller quantities of hydrogen required. PEM fuel cells appear to be potentially competitive in two markets: (1) Backup power (BuP) supply, and (2) electrically-powered MHE (Mahadevan et al., 2007a, 2007b). There are several Original Equipment Manufacturers (OEMs) of PEM fuel cell systems for these applications but production levels have been quite low (on the order of 100-200 per year) and cumulative production experience is also limited (on the order of 1,000 units to date). As a consequence, costs remain above target levels and PEM fuel cell OEMs are not yet competitive in these markets. If cost targets can be reached and acceptable solutions to hydrogen supply found, a sustainable North American PEM fuel cell industry could be established. If not, the industry and its North American supply chain could disappear within a year or two. The Hydrogen Fuel Cell and Infrastructure Technologies (HFCIT) program of the U.S. Department of Energy (DOE) requested a rapid assessment of the potential for a government acquisition program to bootstrap the market for non-automotive PEM fuel cells by driving down costs via economies of scale and learning-by-doing. The six week study included in-depth interviews of three manufacturers, visits to two production facilities, review of the literature on potential markets in North America and potential federal government procurements, development of a cost model reflecting economies of scale and learning-by-doing, and estimation of the impact of federal PEM fuel cell procurements on fuel cell system costs and the evolution of private market demand. This report presents the findings of that study. Section 2 outlines the status of the industry and describes potential markets based on interviews of manufacturers and the existing literature. Section 3 describes the modeling methodology including key premises and assumptions, and presents estimates of market evolution under four scenarios: (1) Base Case with no federal government procurement program, (2) Scenario 1, an aggressive program beginning with less than 200 units procured in 2008 ramping up to more than 2,000 units in 2012, (3) Scenario 2 which is identical to Scenario 1 except that the private market is assumed to be twice as sensitive to price, and (4) Scenario 3, a delayed, smaller federal procurement program beginning in 2011 increasing to a maximum of just over 1,000 units per year in 2012. The analysis suggests that the aggressive program of Scenario 1 would likely stimulate a sustainable, competitive North American non-automotive PEM fuel cell industry. Given plausible assumptions about learning rates and scale economies, the procurements assumed in Scenario 1 appear to be sufficient to drive down costs to target levels. These findings are conditional on the evolution of acceptable hydrogen supply strategies, which were not explicitly analyzed in this study. Success is less certain under Scenarios 2 and 3, and there appears to be a strong probability that existing OEMs would not survive until 2011. In the Base Case, no program, a viable North American industry does not emerge before 2020.« less

Modeling Guidelines for Code Generation in the Railway Signaling Context

NASA Technical Reports Server (NTRS)

Ferrari, Alessio; Bacherini, Stefano; Fantechi, Alessandro; Zingoni, Niccolo

2009-01-01

Modeling guidelines constitute one of the fundamental cornerstones for Model Based Development. Their relevance is essential when dealing with code generation in the safety-critical domain. This article presents the experience of a railway signaling systems manufacturer on this issue. Introduction of Model-Based Development (MBD) and code generation in the industrial safety-critical sector created a crucial paradigm shift in the development process of dependable systems. While traditional software development focuses on the code, with MBD practices the focus shifts to model abstractions. The change has fundamental implications for safety-critical systems, which still need to guarantee a high degree of confidence also at code level. Usage of the Simulink/Stateflow platform for modeling, which is a de facto standard in control software development, does not ensure by itself production of high-quality dependable code. This issue has been addressed by companies through the definition of modeling rules imposing restrictions on the usage of design tools components, in order to enable production of qualified code. The MAAB Control Algorithm Modeling Guidelines (MathWorks Automotive Advisory Board)[3] is a well established set of publicly available rules for modeling with Simulink/Stateflow. This set of recommendations has been developed by a group of OEMs and suppliers of the automotive sector with the objective of enforcing and easing the usage of the MathWorks tools within the automotive industry. The guidelines have been published in 2001 and afterwords revisited in 2007 in order to integrate some additional rules developed by the Japanese division of MAAB [5]. The scope of the current edition of the guidelines ranges from model maintainability and readability to code generation issues. The rules are conceived as a reference baseline and therefore they need to be tailored to comply with the characteristics of each industrial context. Customization of these recommendations has been performed for the automotive control systems domain in order to enforce code generation [7]. The MAAB guidelines have been found profitable also in the aerospace/avionics sector [1] and they have been adopted by the MathWorks Aerospace Leadership Council (MALC). General Electric Transportation Systems (GETS) is a well known railway signaling systems manufacturer leading in Automatic Train Protection (ATP) systems technology. Inside an effort of adopting formal methods within its own development process, GETS decided to introduce system modeling by means of the MathWorks tools [2], and in 2008 chose to move to code generation. This article reports the experience performed by GETS in developing its own modeling standard through customizing the MAAB rules for the railway signaling domain and shows the result of this experience with a successful product development story.

Starting to Explore Wind Power

ERIC Educational Resources Information Center

Hare, Jonathan

2008-01-01

Described is a simple, cheap and versatile homemade windmill and electrical generator suitable for a school class to use to explore many aspects and practicalities of using wind to generate electrical power. (Contains 8 figures.)

Paracetamol overdose.

PubMed

Skinner, Anita

2015-02-20

Paracetamol is safe and effective at the therapeutic dose. It is beneficial as an analgesic and is an effective antipyretic. Paracetamol is cheap and easy to buy over the counter, which makes it a common choice in intentional overdose.

Cheap Heat.

ERIC Educational Resources Information Center

Switzer, Terry G.

1986-01-01

Describes an activity from the ninth-grade physical science program at the Energy Management Center, the outdoor science and energy education center for students in Pasco County, Florida. The activity focuses on making an effective solar collector. (JN)

Inhalant Abuse: Is Your Child at Risk?

MedlinePlus

... a cheap and accessible alternative to alcohol or marijuana. Most inhalant users report starting using before age ... child is unconscious or not breathing, seek emergency medical help. If your child can't stop huffing, ...

Simulation in bronchoscopy: current and future perspectives.

PubMed

Nilsson, Philip Mørkeberg; Naur, Therese Maria Henriette; Clementsen, Paul Frost; Konge, Lars

2017-01-01

To provide an overview of current literature that informs how to approach simulation practice of bronchoscopy and discuss how findings from other simulation research can help inform the use of simulation in bronchoscopy training. We conducted a literature search on simulation training of bronchoscopy and divided relevant studies in three categories: 1) structuring simulation training in bronchoscopy, 2) assessment of competence in bronchoscopy training, and 3) development of cheap alternatives for bronchoscopy simulation. Bronchoscopy simulation is effective, and the training should be structured as distributed practice with mastery learning criteria (ie, training until a certain level of competence is achieved). Dyad practice (training in pairs) is possible and may increase utility of available simulators. Trainee performance should be assessed with assessment tools with established validity. Three-dimensional printing is a promising new technology opening possibilities for developing cheap simulators with innovative features.

A biorefinery approach based on fractionation with a cheap industrial by-product for getting value from an invasive woody species.

PubMed

Domínguez, Elena; Romaní, Aloia; Alonso, José Luis; Parajó, Juan Carlos; Yáñez, Remedios

2014-12-01

Acacia dealbata wood (an invasive species) was subjected to fractionation with glycerol (a cheap industrial by-product), and the resulting solid phase was used as a substrate for enzymatic hydrolysis. Glycerol fractionation allowed an extensive delignification while preserving cellulose in solid phase. The solids from the fractionation stage showed high susceptibility to enzymatic hydrolysis. Solids obtained under selected fractionation conditions (glycerol content of media, 80 wt%; duration, 1h; liquid to solid ratio, 6 g/g; alkaline and neutral washing stages) were subjected to enzymatic saccharification to achieve glucose concentrations up to 85.40 g/L, with almost complete cellulose conversion into glucose. The results confirmed the potential of glycerol as a fractionation agent for biorefineries. Copyright © 2014 Elsevier Ltd. All rights reserved.

Calibration and testing of a Raman hyperspectral imaging system to reveal powdered food adulteration

PubMed Central

Lohumi, Santosh; Lee, Hoonsoo; Kim, Moon S.; Qin, Jianwei; Kandpal, Lalit Mohan; Bae, Hyungjin; Rahman, Anisur

2018-01-01

The potential adulteration of foodstuffs has led to increasing concern regarding food safety and security, in particular for powdered food products where cheap ground materials or hazardous chemicals can be added to increase the quantity of powder or to obtain the desired aesthetic quality. Due to the resulting potential health threat to consumers, the development of a fast, label-free, and non-invasive technique for the detection of adulteration over a wide range of food products is necessary. We therefore report the development of a rapid Raman hyperspectral imaging technique for the detection of food adulteration and for authenticity analysis. The Raman hyperspectral imaging system comprises of a custom designed laser illumination system, sensing module, and a software interface. Laser illumination system generates a 785 nm laser line of high power, and the Gaussian like intensity distribution of laser beam is shaped by incorporating an engineered diffuser. The sensing module utilize Rayleigh filters, imaging spectrometer, and detector for collection of the Raman scattering signals along the laser line. A custom-built software to acquire Raman hyperspectral images which also facilitate the real time visualization of Raman chemical images of scanned samples. The developed system was employed for the simultaneous detection of Sudan dye and Congo red dye adulteration in paprika powder, and benzoyl peroxide and alloxan monohydrate adulteration in wheat flour at six different concentrations (w/w) from 0.05 to 1%. The collected Raman imaging data of the adulterated samples were analyzed to visualize and detect the adulterant concentrations by generating a binary image for each individual adulterant material. The results obtained based on the Raman chemical images of adulterants showed a strong correlation (R>0.98) between added and pixel based calculated concentration of adulterant materials. This developed Raman imaging system thus, can be considered as a powerful analytical technique for the quality and authenticity analysis of food products. PMID:29708973

Calibration and testing of a Raman hyperspectral imaging system to reveal powdered food adulteration.

PubMed

Lohumi, Santosh; Lee, Hoonsoo; Kim, Moon S; Qin, Jianwei; Kandpal, Lalit Mohan; Bae, Hyungjin; Rahman, Anisur; Cho, Byoung-Kwan

2018-01-01

The potential adulteration of foodstuffs has led to increasing concern regarding food safety and security, in particular for powdered food products where cheap ground materials or hazardous chemicals can be added to increase the quantity of powder or to obtain the desired aesthetic quality. Due to the resulting potential health threat to consumers, the development of a fast, label-free, and non-invasive technique for the detection of adulteration over a wide range of food products is necessary. We therefore report the development of a rapid Raman hyperspectral imaging technique for the detection of food adulteration and for authenticity analysis. The Raman hyperspectral imaging system comprises of a custom designed laser illumination system, sensing module, and a software interface. Laser illumination system generates a 785 nm laser line of high power, and the Gaussian like intensity distribution of laser beam is shaped by incorporating an engineered diffuser. The sensing module utilize Rayleigh filters, imaging spectrometer, and detector for collection of the Raman scattering signals along the laser line. A custom-built software to acquire Raman hyperspectral images which also facilitate the real time visualization of Raman chemical images of scanned samples. The developed system was employed for the simultaneous detection of Sudan dye and Congo red dye adulteration in paprika powder, and benzoyl peroxide and alloxan monohydrate adulteration in wheat flour at six different concentrations (w/w) from 0.05 to 1%. The collected Raman imaging data of the adulterated samples were analyzed to visualize and detect the adulterant concentrations by generating a binary image for each individual adulterant material. The results obtained based on the Raman chemical images of adulterants showed a strong correlation (R>0.98) between added and pixel based calculated concentration of adulterant materials. This developed Raman imaging system thus, can be considered as a powerful analytical technique for the quality and authenticity analysis of food products.

Cost effective system for monitoring of fish migration with a camera

NASA Astrophysics Data System (ADS)

Sečnik, Matej; Brilly, Mitja; Vidmar, Andrej

2016-04-01

Within the European LIFE project Ljubljanica connects (LIFE10 NAT/SI/000142) we have developed a cost-effective solution for the monitoring of fish migration through the fish passes with the underwater camera. In the fish pass at Ambrožev trg and in the fish pass near the Fužine castle we installed a video camera called "Fishcam" to be able to monitor the migration of fish through the fish passes and success of its reconstruction. Live stream from fishcams installed in the fishpassesis available on our project website (http://ksh.fgg.uni-lj.si/ljubljanicaconnects/ang/12_camera). The system for the fish monitoring is made from two parts. First is the waterproof box for the computer with charger and the second part is the camera itself. We used a high sensitive Sony analogue camera. The advantage of this camera is that it has very good sensitivity in low light conditions, so it can take good quality pictures even at night with a minimum additional lighting. For the night recording we use additional IR reflector to illuminate passing fishes. The camera is connected to an 8-inch tablet PC. We decided to use a tablet PC because it is quite small, cheap, it is relatively fast and has a low power consumption. On the computer we use software which has advanced motion detection capabilities, so we can also detect the small fishes. When the fish is detected by a software, its photograph is automatically saved to local hard drive and for backup also on Google drive. The system for monitoring of fish migration has turned out to work very well. From the beginning of monitoring in June 2015 to end of the year there were more than 100.000 photographs produced. The first analysis of them was already prepared estimating fish species and their frequency in passing the fish pass.

SU-F-J-53: A 3D Printed Phantom for the Use of Daily Quality Assurance Alignment Tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woods, K; Ayan, A; Woollard, J

Purpose: To discuss experiences and results for a 3D printed QA phantom used for daily alignment purposes for a six degrees-of-freedom (6DoF) table Methods: A 3D model was created using a fused deposition modeling (FDM) printer using free online computer-aided design (CAD) software. The model has been under use for daily QA alignment tests for a 6DoF couch. An aligned and angled baseplate were also printed in order to introduce known angles for 6DoF corrections during image-guidance. Unique registration contours were created on the faces of the phantom in order to achieve a better cone-beam computed tomography (CBCT) match usingmore » an auto-registration algorithm. A BB was also introduced at the center of the phantom in order to deliver an integrated daily Winston-Lutz (WL) test. Translational, rotational, and WL results were tabulated over one month. Results: The ’honeycomb’ structure of the print was apparent in the EPID images for the WL test, which affected the results of the analysis software. This was fixed by inserting a cube made of polyoxymethylene within the 3D phantom that encompass the BB. Auto-registration results for the three translational and three rotational from a known offset to the BB isocenter consistently fell within 1 mm and 0.2°, respectively. WL tests resulted in an average of 0.71 ± 0.14 mm. Conclusion: 3D printed models allow for accurate builds that can be customized to a variety of clinical needs. Results from translational, rotational, and WL show consistent results over a month’s time. Given its relatively cheap and streamlined workflow, 3D printing could be implemented into any clinic looking to create customized phantoms.« less

System for critical infrastructure security based on multispectral observation-detection module

NASA Astrophysics Data System (ADS)

Trzaskawka, Piotr; Kastek, Mariusz; Życzkowski, Marek; Dulski, Rafał; Szustakowski, Mieczysław; Ciurapiński, Wiesław; Bareła, Jarosław

2013-10-01

Recent terrorist attacks and possibilities of such actions in future have forced to develop security systems for critical infrastructures that embrace sensors technologies and technical organization of systems. The used till now perimeter protection of stationary objects, based on construction of a ring with two-zone fencing, visual cameras with illumination are efficiently displaced by the systems of the multisensor technology that consists of: visible technology - day/night cameras registering optical contrast of a scene, thermal technology - cheap bolometric cameras recording thermal contrast of a scene and active ground radars - microwave and millimetre wavelengths that record and detect reflected radiation. Merging of these three different technologies into one system requires methodology for selection of technical conditions of installation and parameters of sensors. This procedure enables us to construct a system with correlated range, resolution, field of view and object identification. Important technical problem connected with the multispectral system is its software, which helps couple the radar with the cameras. This software can be used for automatic focusing of cameras, automatic guiding cameras to an object detected by the radar, tracking of the object and localization of the object on the digital map as well as target identification and alerting. Based on "plug and play" architecture, this system provides unmatched flexibility and simplistic integration of sensors and devices in TCP/IP networks. Using a graphical user interface it is possible to control sensors and monitor streaming video and other data over the network, visualize the results of data fusion process and obtain detailed information about detected intruders over a digital map. System provide high-level applications and operator workload reduction with features such as sensor to sensor cueing from detection devices, automatic e-mail notification and alarm triggering. The paper presents a structure and some elements of critical infrastructure protection solution which is based on a modular multisensor security system. System description is focused mainly on methodology of selection of sensors parameters. The results of the tests in real conditions are also presented.

Mayfly and fish species identification and sex determination in bleak (Alburnus alburnus) by MALDI-TOF mass spectrometry.

PubMed

Maasz, G; Takács, P; Boda, P; Varbiro, G; Pirger, Z

2017-12-01

Besides food quality control of fish or cephalopods, the novel mass spectrometry (MS) approaches could be effective and beneficial methods for the investigation of biodiversity in ecological research. Our aims were to verify the applicability of MALDI-TOF MS in the rapid identification of closely related species, and to further develop it for sex determination in phenotypically similar fish focusing on the low mass range. For MALDI-TOF MS spectra analysis, ClinProTools software was applied, but our observed classification was also confirmed by Self Organizing Map. For verifying the wide applicability of the method, brains from invertebrate and vertebrate species were used in order to detect the species related markers from two mayflies and eight fish as well as sex-related markers within bleak. Seven Ephemera larvae and sixty-one fish species related markers were observed and nineteen sex-related markers were identified in bleak. Similar patterns were observed between the individuals within one species. In contrast, there were markedly diverse patterns between the different species and sexes visualized by SOMs. Two different Ephemera species and male or female fish were identified with 100% accuracy. The various fish species were classified into 8 species with a high level of accuracy (96.2%). Based on MS data, dendrogram was generated from different fish species by using ClinProTools software. This MS-based dendrogram shows relatively high correspondence with the phylogenetic relationships of both the studied species and orders. In summary, MALDI-TOF MS provides a cheap, reliable, sensitive and fast identification tool for researchers in the case of closely related species using mass spectra acquired in a low mass range to define specific molecular profiles. Moreover, we presented evidence for the first time for determination of sex within one fish species by using this method. We conclude that it is a powerful tool that can revolutionize ecological and environmental research. Copyright © 2017 Elsevier B.V. All rights reserved.

Web catalog of oceanographic data using GeoNetwork

NASA Astrophysics Data System (ADS)

Marinova, Veselka; Stefanov, Asen

2017-04-01

Most of the data collected, analyzed and used by Bulgarian oceanographic data center (BgODC) from scientific cruises, argo floats, ferry boxes and real time operating systems are spatially oriented and need to be displayed on the map. The challenge is to make spatial information more accessible to users, decision makers and scientists. In order to meet this challenge, BgODC concentrate its efforts on improving dynamic and standardized access to their geospatial data as well as those from various related organizations and institutions. BgODC currently is implementing a project to create a geospatial portal for distributing metadata and search, exchange and harvesting spatial data. There are many open source software solutions able to create such spatial data infrastructure (SDI). Finally, the GeoNetwork open source is chosen, as it is already widespread. This software is free, effective and "cheap" solution for implementing SDI at organization level. It is platform independent and runs under many operating systems. Filling of the catalog goes through these practical steps: • Managing and storing data reliably within MS SQL spatial data base; • Registration of maps and data of various formats and sources in GeoServer (most popular open source geospatial server embedded with GeoNetwork) ; • Filling added meta data and publishing geospatial data at the desktop of GeoNetwork. GeoServer and GeoNetwork are based on Java so they require installing of a servlet engine like Tomcat. The experience gained from the use of GeoNetwork Open Source confirms that the catalog meets the requirements for data management and is flexible enough to customize. Building the catalog facilitates sustainable data exchange between end users. The catalog is a big step towards implementation of the INSPIRE directive due to availability of many features necessary for producing "INSPIRE compliant" metadata records. The catalog now contains all available GIS data provided by BgODC for Internet access. Searching data within the catalog is based upon geographic extent, theme type and free text search.

Cheap Words: A Paperback Dictionary Roundup.

ERIC Educational Resources Information Center

Kister, Ken

1979-01-01

Surveys currently available paperback editions in three classes of dictionaries: collegiate, abridged, and pocket. A general discussion distinguishes among the classes and offers seven consumer tips, followed by an annotated listing of dictionaries now available. (SW)

The Pulse of Allegheny County and Pittsburgh.

DOT National Transportation Integrated Search

2016-01-01

Cities are increasingly equipped with low-resolution cameras. They are cheap to : buy, install, and maintain, and thus are usually the choice of departments of : transportation and their contractors. Pittsburgh or New York City have networks of : hun...

Iron- and cobalt-catalyzed arylation of azetidines, pyrrolidines, and piperidines with Grignard reagents.

PubMed

Barré, Baptiste; Gonnard, Laurine; Campagne, Rémy; Reymond, Sébastien; Marin, Julien; Ciapetti, Paola; Brellier, Marie; Guérinot, Amandine; Cossy, Janine

2014-12-05

Iron- and cobalt-catalyzed cross-couplings between iodo-azetidines, -pyrrolidines, -piperidines, and Grignard reagents are disclosed. The reaction is efficient, cheap, chemoselective and tolerates a large variety of (hetero)aryl Grignard reagents.

LEDs are on a roll

NASA Astrophysics Data System (ADS)

Blom, Paul; van Mol, Ton

2011-11-01

Light-emitting diodes are more efficient than conventional lighting, but high production costs limit their uptake. Organic versions that can be produced using a cheap newspaper-style "roll-to-roll" printing process are likely to revolutionize our lighting and signage.

State of salaries.

PubMed

Lloyd, Philippa

2016-11-02

When you start as a band 5 nurse you need to live in a cheap flat-share. But many nurses are mature students with families to support. The issue is the cost of housing in cities, not the salaries of staff.

Practical copper(I)-catalysed amidation of aldehydes.

PubMed

Chang, Joyce Wei Wei; Ton, Thi My Uyen; Tania, Stefani; Taylor, Paul C; Chan, Philip Wai Hong

2010-02-14

The direct synthesis of amides by insertion into the C-H bond of aldehydes is shown to be a practical procedure through application of cheap, readily available catalysts generated in situ from copper(i) halides and pyridine.

Remote multi-function fire alarm system based on internet of things

NASA Astrophysics Data System (ADS)

Wang, Lihui; Zhao, Shuai; Huang, Jianqing; Ji, Jianyu

2018-05-01

This project uses MCU STC15W408AS (stable, energy saving, high speed), temperature sensor DS18B20 (cheap, high efficiency, stable), MQ2 resistance type semiconductor smog sensor (high stability, fast response and economy) and NRF24L01 wireless transmitting and receiving module (energy saving, small volume, reliable) as the main body to achieve concentration temperature data presentation, intelligent voice alarming and short distance wireless transmission. The whole system is safe, reliable, cheap, quick reaction and good performance. This project uses the MCU STM32F103RCT6 as the main control chip, and use WIFI module ESP8266, wireless module NRF24L01 to make the gateway. Users can remotely check and control the related devices in real-time on smartphones or computers. We can also realize the functions of intelligent fire monitoring, remote fire extinguishing, cloud data storage through the third party server Big IOT.

Initial research on recycled tyre bales for road infrastructure applications

NASA Astrophysics Data System (ADS)

Duda, Aleksander; Sobala, Dariusz

2017-12-01

The paper reviews selected surveys carried out within the R&D project, co-financed with the European Regional Development Fund, called "ReUse - Innovative Recycling Materials, Enhancing the Sustainability of Bridge Facilities" (Innotech No. K3 / IN3 / 38/228116 / NCBiR / 15). The aim of the project and conducted research is to develop and implement innovative, cheap and environmentally-friendly recycled construction material in the form of tyre bales made from compressed used car tyres. This material is likely to be applied in civil engineering, especially in transport infrastructure, geotechnical and hydraulic engineering. New material is cheap and has unique properties such as low weight, high water permeability, high vibration and noise-damping capacity, low pressure coefficient values and other parameters that technically and economically allow it to replace natural aggregates. The extensive practical application of new material will facilitate the replacement of waste management methods with the environmentally friendly ones.

Achieving cheap clean energy for all in the 21^st Century?

NASA Astrophysics Data System (ADS)

Gupta, Rajan

2006-11-01

Energy is essential for modern life and is a critical resource that we take for granted. Unfortunately, we are increasingly confronted by many unsettling questions: Is there enough cheap oil and gas remaining and should we start changing our life styles towards energy efficiency? What will be the price of oil and gas next year and will we face shortages? Are rising prices reflective of greed and manipulation or geopolitics or of real constraints? Will renewable sources provide a significant fraction of our energy needs? Is global warming already happening and is it a result of our ``addiction to oil''? If the answer to these is ``yes'', then what can we, as individuals, do to help ourselves, the nation, and the world? This talk will attempt to answer these questions by examining the global oil, gas and other resources, emerging constraints and opportunities, and geopolitics.

Biodiesel production from yeast Cryptococcus sp. using Jerusalem artichoke.

PubMed

Sung, Mina; Seo, Yeong Hwan; Han, Shin; Han, Jong-In

2014-03-01

Jerusalem artichoke was investigated as a cheap substrate for the heterotrophic production using a lab yeast strain Cryptococcus sp. Using Response Surface Method, 54.0% of fructose yield was achieved at 12% of dried Jerusalem artichoke powder, 0.57% of nitric acid concentration, 117°C of reaction temperature, and 49min of reaction time. At this optimal condition, nitric acid showed the best catalytic activity toward inulin hydrolysis and also the resulting fructose hydrolyte supported the highest microbial growth compared with other acids. In addition, lipid productivity of 1.73g/L/d was achieved, which is higher than a defined medium using pure fructose as a substrate. Lipid quality was also found to be generally satisfactory as a feedstock for fuel, demonstrating Jerusalem artichoke could indeed be a good and cheap option for the purpose of biodiesel production. Copyright © 2013 Elsevier Ltd. All rights reserved.

Analysis of organo-chlorine pesticides residue in raw coffee with a modified "quick easy cheap effective rugged and safe" extraction/clean up procedure for reducing the impact of caffeine on the gas chromatography-mass spectrometry measurement.

PubMed

Bresin, Bruno; Piol, Maria; Fabbro, Denis; Mancini, Maria Antonietta; Casetta, Bruno; Del Bianco, Clorinda

2015-01-09

The control of pesticide residues on raw coffee is a task of great importance due to high consumption of this beverage in Italy and in many other countries. High caffeine content can hamper extraction and measurement of any pesticide residue. A tandem extraction protocol has been devised by exploiting the quick easy cheap effective rugged and safe (QuEChERS) scheme for extraction, coupled to a dispersive liquid-liquid micro-extraction (DLLME) in order to drastically reduce caffeine content in the final extract. Gas chromatography-mass spectrometry (GC-MS) has been used for quantification of organo-chlorine pesticides in single ion monitoring (SIM) mode. Method has been validated and performances meet the criteria prescribed by European Union regulations. Copyright © 2014 Elsevier B.V. All rights reserved.

Efficient Production of Lactic Acid from Sweet Sorghum Juice by a Newly Isolated Lactobacillus salivarius CGMCC 7.75.

PubMed

Liu, Quanlan; Wang, Shanglong; Zhi, Jian-Fei; Ming, Henglei; Teng, Dawei

2013-09-01

Sweet sorghum juice was a cheap and renewable resource, and also a potential carbon source for the fermentation production of lactic acid (LA) by a lactic acid bacterium. One newly isolated strain Lactobacillus salivarius CGMCC 7.75 showed the ability to produce the highest yield and optical purity of LA from sweet sorghum juice. Studies of feeding different concentrations of sweet sorghum juice and nitrogen source suggested the optimal concentrations of fermentation were 325 ml l(-1) and 20 g l(-1), respectively. This combination produced 142.49 g l(-1) LA with a productivity level of 0.90 g of LA per gram of sugars consumed. The results indicated the high LA concentration achieved using L. salivarius CGMCC 7.75 not only gives cheap industrial product, but also broaden the application of sweet sorghum.

Smuggling and cross border shopping of tobacco in Europe.

PubMed

Joossens, L; Raw, M

1995-05-27

Governments have recently become concerned about cross border shopping and smuggling because it can decrease tax revenue. The tobacco industry predicted that, with the removal of border controls in the European Union, price differences between neighbouring countries would lead to a diversion of tobacco trade, legally and illegally, to countries with cheaper cigarettes. According to them this diversion would be through increased cross border shopping for personal consumption or through increased smuggling of cheap cigarettes from countries with low tax to countries with high tax, where cigarettes are more expensive. These arguments have been used to urge governments not to increase tax on tobacco products. The evidence suggests, however, that cross border shopping is not yet a problem in Europe and that smuggling is not of cheap cigarettes to expensive countries. Instead, more expensive "international" brands are smuggled into northern Europe and sold illegally on the streets of the cheaper countries of southern Europe.

Smuggling and cross border shopping of tobacco in Europe.

PubMed Central

Joossens, L.; Raw, M.

1995-01-01

Governments have recently become concerned about cross border shopping and smuggling because it can decrease tax revenue. The tobacco industry predicted that, with the removal of border controls in the European Union, price differences between neighbouring countries would lead to a diversion of tobacco trade, legally and illegally, to countries with cheaper cigarettes. According to them this diversion would be through increased cross border shopping for personal consumption or through increased smuggling of cheap cigarettes from countries with low tax to countries with high tax, where cigarettes are more expensive. These arguments have been used to urge governments not to increase tax on tobacco products. The evidence suggests, however, that cross border shopping is not yet a problem in Europe and that smuggling is not of cheap cigarettes to expensive countries. Instead, more expensive "international" brands are smuggled into northern Europe and sold illegally on the streets of the cheaper countries of southern Europe. PMID:7787549

Computerized digital dermoscopy.

PubMed

Gewirtzman, A J; Braun, R P

2003-01-01

Within the past 15 years, dermoscopy has become a widely used non-invasive technique for physicians to better visualize pigmented lesions. Dermoscopy has helped trained physicians to better diagnose pigmented lesions. Now, the digital revolution is beginning to enhance standard dermoscopic procedures. Using digital dermoscopy, physicians are better able to document pigmented lesions for patient follow-up and to get second opinions, either through teledermoscopy with an expert colleague or by using computer-assisted diagnosis. As the market for digital dermoscopy products begins to grow, so do the number of decisions physicians need to make when choosing a system to fit their needs. The current market for digital dermoscopy includes two varieties of relatively simple and cheap attachments which can convert a consumer digital camera into a digital dermoscope. A coupling adapter acts as a fastener between the camera and an ordinary dermoscope, whereas a dermoscopy attachment includes the dermoscope optics and light source and can be attached directly to the camera. Other options for digital dermoscopy include complete dermoscopy systems that use a hand-held video camera linked directly to a computer. These systems differ from each other in whether or not they are calibrated as well as the quality of the camera and software interface. Another option in digital skin imaging involves spectral analysis rather than dermoscopy. This article serves as a guide to the current systems available and their capabilities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jager, Yetta; Smith, Brennan T

Hydroelectric power provides a cheap source of electricity with few carbon emissions. Yet, reservoirs are not operated sustainably, which we define as meeting societal needs for water and power while protecting long-term health of the river ecosystem. Reservoirs that generate hydropower are typically operated with the goal of maximizing energy revenue, while meeting other legal water requirements. Reservoir optimization schemes used in practice do not seek flow regimes that maximize aquatic ecosystem health. Here, we review optimization studies that considered environmental goals in one of three approaches. The first approach seeks flow regimes that maximize hydropower generations while satisfying legalmore » requirements, including environmental (or minimum) flows. Solutions from this approach are often used in practice to operate hydropower projects. In the second approach, flow releases from a dam are timed to meet water quality constraints on dissolved oxygen (DO), temperature and nutrients. In the third approach, flow releases are timed to improve the health of fish populations. We conclude by suggesting three steps for bringing multi-objective reservoir operation closer to the goal of ecological sustainability: (1) conduct research to identify which features of flow variation are essential for river health and to quantify these relationships, (2) develop valuation methods to assess the total value of river health and (3) develop optimal control softwares that combine water balance modeling with models that predict ecosystem responses to flow.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jager, Yetta; Smith, Brennan T

Hydroelectric power provides a cheap source of electricity with few carbon emissions. Yet, reservoirs are not operated sustainably, which we define as meeting societal needs for water and power while protecting long-term health of the river ecosystem. Reservoirs that generate hydropower are typically operated with the goal of maximizing energy revenue, while meeting other legal water requirements. Reservoir optimization schemes used in practice do not seek flow regimes that maximize aquatic ecosystem health. Here, we review optimization studies that considered environmental goals in one of three approaches. The first approach seeks flow regimes that maximize hydropower generation, while satisfying legalmore » requirements, including environmental (or minimum) flows. Solutions from this approach are often used in practice to operate hydropower projects. In the second approach, flow releases from a dam are timed to meet water quality constraints on dissolved oxygen (DO), temperature and nutrients. In the third approach, flow releases are timed to improve the health of fish populations. We conclude by suggesting three steps for bringing multi-objective reservoir operation closer to the goal of ecological sustainability: (1) conduct research to identify which features of flow variation are essential for river health and to quantify these relationships, (2) develop valuation methods to assess the total value of river health and (3) develop optimal control softwares that combine water balance modelling with models that predict ecosystem responses to flow.« less

Effect of teaching stress management skills on self-esteem and behavioral adjustment in people with somatomotor disabilities

PubMed Central

Kamalinasab, Z; Mahdavi, A; Ebrahimi, M; Vahidi Nekoo, M; Aghaei, M; Ebrahimi, F

2015-01-01

Objective: Psychological interventions for enhancing mental health in those with somatomotor-physical disabilities are vital. The existing research aimed to examine the effect of teaching stress management skills on self-esteem and behavioral adjustment in individuals with somatomotor-physical disabilities. Methodology: The method of the survey was semi-experimental with a pre-test post-test design and a control group. Hence, in Tehran, 40 girls with somatomotor-physical disabilities were selected by using convenience sampling, and they were divided into two groups: control and experiment. Both groups were tested by using a demography questionnaire, Rozenberg’s self-esteem scale, and a behavioral adjustment questionnaire. Afterwards, the test group received lessons on stress management within ten sessions, but the control group received no interventions. Then both groups were post-tested, and the collected data were analyzed by using descriptive and inferential statistics methods through SPSS software. Findings: Findings showed that teaching stress management skills significantly increased self-esteem and behavioral adjustment in girls with somatomotor-physical disabilities (p < 0.001). Conclusion: According to the study, it could be concluded that teaching stress management skills is an effective way to help endangered individuals such as girls who have somatomotor-physical disabilities because it is highly efficient especially when it is performed in groups, it is cheap, and acceptable by different people. PMID:28316725

Colorimetric analyzer based on mobile phone camera for determination of available phosphorus in soil.

PubMed

Moonrungsee, Nuntaporn; Pencharee, Somkid; Jakmunee, Jaroon

2015-05-01

A field deployable colorimetric analyzer based on an "Android mobile phone" was developed for the determination of available phosphorus content in soil. An inexpensive mobile phone embedded with digital camera was used for taking photograph of the chemical solution under test. The method involved a reaction of the phosphorus (orthophosphate form), ammonium molybdate and potassium antimonyl tartrate to form phosphomolybdic acid which was reduced by ascorbic acid to produce the intense colored molybdenum blue. The software program was developed to use with the phone for recording and analyzing RGB color of the picture. A light tight box with LED light to control illumination was fabricated to improve precision and accuracy of the measurement. Under the optimum conditions, the calibration graph was created by measuring blue color intensity of a series of standard phosphorus solution (0.0-1.0mgPL(-1)), then, the calibration equation obtained was retained by the program for the analysis of sample solution. The results obtained from the proposed method agreed well with the spectrophotometric method, with a detection limit of 0.01mgPL(-1) and a sample throughput about 40h(-1) was achieved. The developed system provided good accuracy (RE<5%) and precision (RSD<2%, intra- and inter-day), fast and cheap analysis, and especially convenient to use in crop field for soil analysis of phosphorus nutrient. Copyright © 2015 Elsevier B.V. All rights reserved.

Automated chest-radiography as a triage for Xpert testing in resource-constrained settings: a prospective study of diagnostic accuracy and costs

NASA Astrophysics Data System (ADS)

Philipsen, R. H. H. M.; Sánchez, C. I.; Maduskar, P.; Melendez, J.; Peters-Bax, L.; Peter, J. G.; Dawson, R.; Theron, G.; Dheda, K.; van Ginneken, B.

2015-07-01

Molecular tests hold great potential for tuberculosis (TB) diagnosis, but are costly, time consuming, and HIV-infected patients are often sputum scarce. Therefore, alternative approaches are needed. We evaluated automated digital chest radiography (ACR) as a rapid and cheap pre-screen test prior to Xpert MTB/RIF (Xpert). 388 suspected TB subjects underwent chest radiography, Xpert and sputum culture testing. Radiographs were analysed by computer software (CAD4TB) and specialist readers, and abnormality scores were allocated. A triage algorithm was simulated in which subjects with a score above a threshold underwent Xpert. We computed sensitivity, specificity, cost per screened subject (CSS), cost per notified TB case (CNTBC) and throughput for different diagnostic thresholds. 18.3% of subjects had culture positive TB. For Xpert alone, sensitivity was 78.9%, specificity 98.1%, CSS $13.09 and CNTBC $90.70. In a pre-screening setting where 40% of subjects would undergo Xpert, CSS decreased to $6.72 and CNTBC to $54.34, with eight TB cases missed and throughput increased from 45 to 113 patients/day. Specialists, on average, read 57% of radiographs as abnormal, reducing CSS ($8.95) and CNTBC ($64.84). ACR pre-screening could substantially reduce costs, and increase daily throughput with few TB cases missed. These data inform public health policy in resource-constrained settings.

High-Content, High-Throughput Screening for the Identification of Cytotoxic Compounds Based on Cell Morphology and Cell Proliferation Markers

PubMed Central

Martin, Heather L.; Adams, Matthew; Higgins, Julie; Bond, Jacquelyn; Morrison, Ewan E.; Bell, Sandra M.; Warriner, Stuart; Nelson, Adam; Tomlinson, Darren C.

2014-01-01

Toxicity is a major cause of failure in drug discovery and development, and whilst robust toxicological testing occurs, efficiency could be improved if compounds with cytotoxic characteristics were identified during primary compound screening. The use of high-content imaging in primary screening is becoming more widespread, and by utilising phenotypic approaches it should be possible to incorporate cytotoxicity counter-screens into primary screens. Here we present a novel phenotypic assay that can be used as a counter-screen to identify compounds with adverse cellular effects. This assay has been developed using U2OS cells, the PerkinElmer Operetta high-content/high-throughput imaging system and Columbus image analysis software. In Columbus, algorithms were devised to identify changes in nuclear morphology, cell shape and proliferation using DAPI, TOTO-3 and phosphohistone H3 staining, respectively. The algorithms were developed and tested on cells treated with doxorubicin, taxol and nocodazole. The assay was then used to screen a novel, chemical library, rich in natural product-like molecules of over 300 compounds, 13.6% of which were identified as having adverse cellular effects. This assay provides a relatively cheap and rapid approach for identifying compounds with adverse cellular effects during screening assays, potentially reducing compound rejection due to toxicity in subsequent in vitro and in vivo assays. PMID:24505478

Extended Range Aerial Delivery Using an Unpowered Autonomous Tailless UAV

NASA Astrophysics Data System (ADS)

Kraft, Tyler E.

An alternative approach for precision aerial delivery utilizing a flying wing for controllable forward glide is presented. Although effective, current delivery methods either display a lack of control, or require close standoff distances, potentially endangering aircraft personnel as well as bystanders. Hardware-in-the-loop simulations provide an efficient method for evaluating various wing designs and actuation configurations. Four control surface configurations are presented and evaluated, encompassing traditional aircraft and ram-air parafoil control approaches. Fixed-wing and multirotor unmanned aircraft-based flight tests were conducted to evaluate the controllability and handling performance of the various configurations of both a fixed wing model and a model with collapsing wings. A manufacturing process was developed to allow repeatable results in the field using cheap, mostly disposable materials. A powered flying wing model was used to maximize data collection in later stages of software development. Data collected during flight tests was used to create a model of the system and develop a Nonlinear Dynamic Inversion controller for autonomous flight. The NDI controller was able to provide stable flight in pitch, but will need more development to control yaw, instead an intentional bias was built in to show proof of concept for direct yaw control. The results demonstrate the feasibility of the flying wing-based aerial delivery; however, significant challenges remain regarding the stability and scalability of the system.

A small, cheap, and portable reconnaissance robot

NASA Astrophysics Data System (ADS)

Kenyon, Samuel H.; Creary, D.; Thi, Dan; Maynard, Jeffrey

2005-05-01

While there is much interest in human-carriable mobile robots for defense/security applications, existing examples are still too large/heavy, and there are not many successful small human-deployable mobile ground robots, especially ones that can survive being thrown/dropped. We have developed a prototype small short-range teleoperated indoor reconnaissance/surveillance robot that is semi-autonomous. It is self-powered, self-propelled, spherical, and meant to be carried and thrown by humans into indoor, yet relatively unstructured, dynamic environments. The robot uses multiple channels for wireless control and feedback, with the potential for inter-robot communication, swarm behavior, or distributed sensor network capabilities. The primary reconnaissance sensor for this prototype is visible-spectrum video. This paper focuses more on the software issues, both the onboard intelligent real time control system and the remote user interface. The communications, sensor fusion, intelligent real time controller, etc. are implemented with onboard microcontrollers. We based the autonomous and teleoperation controls on a simple finite state machine scripting layer. Minimal localization and autonomous routines were designed to best assist the operator, execute whatever mission the robot may have, and promote its own survival. We also discuss the advantages and pitfalls of an inexpensive, rapidly-developed semi-autonomous robotic system, especially one that is spherical, and the importance of human-robot interaction as considered for the human-deployment and remote user interface.

Ubiquitous monitoring of electrical household appliances.

PubMed

Lloret, Jaime; Macías, Elsa; Suárez, Alvaro; Lacuesta, Raquel

2012-11-07

The number of appliances at home is increasing continuously, mainly because they make our lives easier. Currently, technology is integrated in all objects of our daily life. TCP/IP let us monitor our home in real time and check ubiquitously if something is happening at home. Bearing in mind this idea, we have developed a low-cost system, which can be used in any type of electrical household appliance that takes information from the appliance and posts the information to the Twitter Social network. Several sensors placed in the household appliances gather the sensed data and send them wired or wirelessly, depending on the case, using small and cheap devices to a gateway located in the home. This gateway takes decisions, based on the received data, and sends notifications to Twitter. We have developed a software application that takes the values and decides when to issue an alarm to the registered users (Twitter friends of our smart home). The performance of our system has been measured taking into account the home network (using IEEE 802.3u and IEEE 802.11g) and the data publishing in Twitter. As a result, we have generated an original product and service for any electrical household appliance, regardless of the model and manufacturer, that helps home users improve their quality of life. The paper also shows that there is no system with the same innovative features like the ones presented in this paper.

More Homespun Experiments in Physics.

ERIC Educational Resources Information Center

Siddons, J. C.

1979-01-01

Describes how some experiments in physics can be presented in class using cheap materials. How to produce an electrostatic charge using a polythene bottle and how to make a tissue paper electroscope using a tin can are among the experiments described. (HM)

P.S.

ERIC Educational Resources Information Center

South Australian Science Teachers Journal, 1973

1973-01-01

Presents ideas from readers on techniques and equipment that might be useful in teaching secondary school science. Suggests how to construct cheap wall charts, modify a vacuum cleaner into a blower, construct a stereo microscope lamp holder, and outlines simple physics laboratory experiments. (JR)

Patron ID Cards Made Easy and Cheap

ERIC Educational Resources Information Center

Peischl, Tom

1978-01-01

Four major problems of academic library identification cards are expense, distribution, timeliness, and validation. By moving from a commercially produced plastic library card to a locally produced paper IBM-type card, this library solved these four library card problems. (Author)

NASA-DoD Lead-Free Electronics Project

NASA Technical Reports Server (NTRS)

Kessel, Kurt

2010-01-01

Original Equipment Manufacturers (OEMs), depots, and support contract ors have to be prepared to deal with an electronics supply chain that increasingly provides parts with lead-free finishes, some labeled no differently and intermingled with their SnPb counterparts. Allowance of lead-free components presents one of the greatest risks to the r eliability of military and aerospace electronics. The introduction of components with lead-free terminations, termination finishes, or cir cuit boards presents a host of concerns to customers, suppliers, and maintainers of aerospace and military electronic systems such as: 1. Electrical shorting due to tin whiskers 2. Incompatibility of lead-f ree processes and parameters (including higher melting points of lead -free alloys) with other materials in the system 3. Unknown material properties and incompatibilities that could reduce solder joint reli ability As the transition to lead-free becomes a certain reality for military and aerospace applications, it will be critical to fully un derstand the implications of reworking lead-free assemblies.

Game-Theoretic Models for Usage-based Maintenance Contract

NASA Astrophysics Data System (ADS)

Husniah, H.; Wangsaputra, R.; Cakravastia, A.; Iskandar, B. P.

2018-03-01

A usage-based maintenance contracts with coordination and non coordination between two parties is studied in this paper. The contract is applied to a dump truck operated in a mining industry. The situation under study is that an agent offers service contract to the owner of the truck after warranty ends. This contract has only a time limit but no usage limit. If the total usage per period exceeds the maximum usage allowed in the contract, then the owner will be charged an additional cost. In general, the agent (Original Equipment Manufacturer/OEM) provides a full coverage of maintenance, which includes PM and CM under the lease contract. The decision problem for the owner is to select the best option offered that fits to its requirement, and the decision problem for the agent is to find the optimal maintenance efforts for a given price of the service option offered. We first find the optimal decisions using coordination scheme and then with non coordination scheme for both parties.

Resource Efficient Metal and Material Recycling

NASA Astrophysics Data System (ADS)

Reuter, Markus A.; van Schaik, Antoinette

Metals enable sustainability through their use and their recyclability. However, various factors can affect the Resource Efficiency of Metal Processing and Recycling. Some typical factors that enable Resource Efficiency include and arranged under the drivers of sustainability: Environment (Maximize Resource Efficiency — Energy, Recyclates, Materials, Water, Sludges, Emissions, Land); Economic Feasibility (BAT & Recycling Systems Simulation / Digitalization, Product vis-à-vis Material Centric Recycling); and Social — Licence to Operate (Legislation, consumer, policy, theft, manual labour.). In order to realize this primary production has to be linked systemically with typical actors in the recycling chain such as Original Equipment Manufacturers (OEMs), Recyclers & Collection, Physical separation specialists as well as process metallurgical operations that produce high value metals, compounds and products that recycle back to products. This is best done with deep knowledge of multi-physics, technology, product & system design, process control, market, life cycle management, policy, to name a few. The combination of these will be discussed as Design for Sustainability (DfS) and Design for Recycling (DfR) applications.

Digital line graphs from 1:100,000-scale maps

USGS Publications Warehouse

,

1989-01-01

The National Cartographic Information Center (NCIC) distributes digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data files may be grouped into four basic types. The first of these, called a Digital Line Graph (DLG), is line map information in digital form. These data files include information on planimetric base categories, such as transportation, hydrography, and boundaries. The second form, called a Digital Elevation Model (OEM), consists of a sampled array of elevations for ground positions that are usually, but not always, at regularly spaced intervals. The third type is Land Use and Land Cover digital data, which provides information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for known places, features, and areas in the United States identified by a proper name.

Ultrafine particle emissions by in-use diesel buses of various generations at low-load regimes

NASA Astrophysics Data System (ADS)

Tartakovsky, L.; Baibikov, V.; Comte, P.; Czerwinski, J.; Mayer, A.; Veinblat, M.; Zimmerli, Y.

2015-04-01

Ultrafine particles (UFP) are major contributors to air pollution due to their easy gas-like penetration into the human organism, causing adverse health effects. This study analyzes UFP emissions by buses of different technologies (from Euro II till Euro V EEV - Enhanced Environmentally-friendly Vehicle) at low-load regimes. Additionally, the emission-reduction potential of retrofitting with a diesel particle filter (DPF) is demonstrated. A comparison of the measured, engine-out, particle number concentrations (PNC) for buses of different technological generations shows that no substantial reduction of engine-out emissions at low-load operating modes is observed for newer bus generations. Retrofitting the in-use urban and interurban buses of Euro II till Euro IV technologies by the VERT-certified DPF confirmed its high efficiency in reduction of UFP emissions. Particle-count filtration efficiency values of the retrofit DPF were found to be extremely high - greater than 99.8%, similar to that of the OEM filter in the Euro V bus.

Scientific and Technical Information (STI) for Financial Assistance and Non-M&O/M&I

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaGrandeur, John; Crane, Doug

2012-07-02

BSST (hereafter referred to as Amerigon) began work in November 2004 under a cost share contract [1] awarded by the U.S. Department of Energy Freedom Car Office to develop a high efficiency Thermoelectric Waste Energy Recovery System for passenger vehicle applications. The system increases fuel economy by partially replacing the electric power produced by the alternator with electric power produced by conversion of exhaust gas in a Thermoelectric Generator (TEG). Amerigon’s team members included the BMW Group and Ford Motor Company, with both OEMs demonstrating the TEG system in their vehicles in the final program phase. Significant progress was mademore » in modeling, building and testing the TEG system from the lowest subassembly levels through an entire vehicle system. By the program’s conclusion, the team had successfully overcome the challenges of integrating TE materials into an exhaust system component and evaluated the system behavior in bench and over the road testing for over six months.« less

Bulldozer better than poisons for preparing scrub oak planting sites

Treesearch

W. E. McQuilkin

1951-01-01

Before scrub oak lands can be reforested, some cheap and effective way of preparing planting sites must be found. Chemical weed killers have been tried, but they proved to be impractical for general use (see Northeastern Research Note 6).

QTL mapping of sulfur tolerance in melon

USDA-ARS?s Scientific Manuscript database

Elemental sulfur is a cheap, effective fungicide with multi-site action, which inhibits the evolution of pathogen resistance. Fungal pathogens cause significant yield losses in melon production. Many melon genotypes, however, suffer leaf necrosis in response to elemental sulfur application preventin...

Dirt Cheap and All Around Us.

ERIC Educational Resources Information Center

Nelson, Donald J.

1985-01-01

Presents a variety of outdoor and classroom activities in which soil is used to teach environmental concepts and to provide students with science process skills practice. Areas considered include: site selection and description; compaction; infiltration rate; temperature; components; water content; and microorganisms. (DH)

Lock For Valve Stem

NASA Technical Reports Server (NTRS)

Burley, Richard K.; Guirguis, Kamal S.

1991-01-01

Simple, cheap device locks valve stem so its setting cannot be changed by unauthorized people. Device covers valve stem; cover locked in place with standard padlock. Valve lock made of PVC pipe and packing band. Shears, drill or punch, and forming rod only tools needed.

Chemical modifications of renewable cellulosic materials

USDA-ARS?s Scientific Manuscript database

In agriculture, there is a fair amount of byproducts and waste materials. These materials typically contain significant portions of cellulose and hemicellulose. A good opportunity is to take advantage of these relatively cheap renewable materials, carry out chemical reactions, and increase their v...

Improved employment data for transportation planning

DOT National Transportation Integrated Search

1998-10-01

Transportation planners typically use census data or small sample surveys to help estimate work trips in metropolitan areas. Census data are cheap to use but are only collected every 10 years and may not provide the answers that a planner is seeking....

Federal Barriers to Innovation

ERIC Educational Resources Information Center

Miller, Raegen; Lake, Robin

2012-01-01

With educational outcomes inadequate, resources tight, and students' academic needs growing more complex, America's education system is certainly ready for technological innovation. And technology itself is ripe to be exploited. Devices harnessing cheap computing power have become smart and connected. Voice recognition, artificial intelligence,…

Social Institutions and Nuclear Energy

ERIC Educational Resources Information Center

Weinberg, Alvin M.

1972-01-01

Nuclear technologists can offer an all but infinite source of relatively cheap and clean energy" but society must decide whether the price of eternal vigilance needed to ensure proper and safe operation of its nuclear energy system" is worth the benefits. (Author/AL)

World-Record Solar Cell a Step Closer to Cheap Solar Energy

Science.gov Websites

envelope of solar-cell efficiency, we can begin to visualize the day when energy from the sun will be in efficiency translates into lower costs for harnessing energy from the sun. The cell's excellent

Human Performance and Biosystems

DTIC Science & Technology

2013-03-08

carbon nanotube binding peptides *A mutant laccase designed at UW self- assembles into active crystals Leucine βroll Linker (S) α-helix (H...cognitive functions, bio-molecular repair and bio- resiliency Bioenergy: • Portable H2 Fuel Generated from H2O or Cellulose : - Cheap, self

Prism-assembly for dual-band short-wave infrared region line-scan camera

NASA Astrophysics Data System (ADS)

Chassagne, Bruno; de Laulanié, Lucie; Pommiès, Matthieu

2018-02-01

A simple dichroic splitter for dual-band line scanning is described. It comprises prisms elements that enable cheapness of the whole prototype by using only one linear detector. Validity of the design is demonstrated via in-line moisture measurement.

Easing the Perils of the Postdoctoral Years: A Call for Institutional Attention.

ERIC Educational Resources Information Center

Lorden, Joan F.; Matalon, Sadis

2002-01-01

Describes the University of Alabama at Birmingham's experience grappling with the many issues surrounding postdoctoral education in order to ensure that postdoctoral researchers are treated as more than cheap skilled labor and given benefits or opportunities for advancement. (EV)

Apparatus for Teaching Physics.

ERIC Educational Resources Information Center

Gottlieb, Herbert H., Ed.

1978-01-01

Discusses the adaptation of some familiar equipment for use in physics demonstrations: demonstrating waves using a folding slinky, measuring the partial pressure of water vapor, lengthening the time constant on a rate meter, measuring "g" with a phonograph turntable, and constructing a cheap signal generator. (GA)

"Mobile" Contexts/"Immobile" Cultures

ERIC Educational Resources Information Center

Geoffroy, Christine

2007-01-01

Communication technologies and cheap air travel have profoundly reshaped the patterns of international circulation and migration, blurring the distinction between travellers, tourists and migrants. Some tourists have selected their former recreational area as permanent place of residence while other people are choosing or are being forced into…

Internet Access and Pricing: Sorting Out the Options.

ERIC Educational Resources Information Center

Fowler, Thomas B.

1997-01-01

Discusses Internet access and pricing options. Highlights include restructuring of the telecommunications industry; current methods of access; economics of high-speed access; the impact of cheap Internet access; long-term possibilities; and a table that provides a comparison of Internet access methods. (LRW)

Efficacy of cheap amendments for stabilizing trace elements in contaminated paddy fields.

PubMed

Huang, Tai-Hsiang; Lai, Yun-Jie; Hseu, Zeng-Yei

2018-05-01

In situ stabilization of trace elements by adding cheap amendments is an emerging technology for large-scale soil remediation. Various amendments have been examined well in the literature, but related have focused predominantly on short-term laboratory scale incubation or pot experiments. This study applied dolomitic lime at 40 ton ha -1 , oyster shell (OS) at 80 ton ha -1 , and sugarcane bagasse compost (SC) at 60 ton ha -1 to a paddy field in Taiwan for two rice (Oryza sativa L.) cropping seasons. The aims of study were to gain an understanding of the bioavailable concentrations of Cr, Ni, Cu, and Zn in the amended soil and the metal uptake of rice for practical amendment use in field-scale remediation of contaminated soils. The treatments of lime and OS significantly (p < 0.05) decreased the 0.1 N HCl-extractable metals in the soil. The increase in soil pH was the key factor in decreasing the bioavailable pool of metals in the soil by using lime and OS. The concentrations of Cu, Zn, and Ni in the brown rice were substantially reduced only through the addition of OS, and thus OS met the requirement of being a cheap, locally available, and environmentally compatible amendment for field-scale soil remediation. The translocation of Cr in rice plants is heavily restricted, and thus no significant differences in Cr uptake by rice grain were observed between the different amendment treatments. However, SC is not recommended as an immobilization agent because it caused a pH decrease in the amended soil. Copyright © 2018 Elsevier Ltd. All rights reserved.

The Influence of Varying Cost Formats on Preferences

PubMed Central

Jiang, Charles Changchuan; Fraenkel, Liana

2016-01-01

Background Numerous studies have found that cost strongly influences patients’ decision-making. The objective of this study was to explore the impact of varying cost formats on patients’ preferences. Methods Mechanical Turk workers completed a choice based conjoint (CBC) analysis survey. The CBC survey was designed to examine stated preferences for second line agents used to treat diabetes using five attributes: route of administration, efficacy, risk of low blood sugar, frequency of checking blood sugar levels and cost. We developed seven versions of the CBC survey which were identical except for the cost attribute. We described cost in terms of: Affordability, Monthly co-pay, Dollar Sign Rating, How Expensive or How Cheap compared to other medications, Monthly Co-pay, Working Hours Equivalent (per month) and Percent of Monthly Income. The resulting part-worth utilities were used to calculate the relative importance of cost and to estimate treatment preferences for a sulfonylurea, exenatide and insulin. Results The relative impact of cost varied significantly across the seven formats. Cost had the greatest influence on participants’ decisions when framed in terms of Affordability [mean (SD) relative importance = 37.3 (0.9)] and the lowest influence when framed in terms of How Cheap (compared to other drugs) [mean (SD) relative importance= 12.1 (0.9)]. A sulfonylurea was strongly preferred across four of the seven formats. Preference for insulin, the most effective, albeit riskiest option, was low across all cost formats. Conclusions The format used to describe cost influences how this attribute impacts patients’ preferences. Individuals are most cost-sensitive when cost is framed in terms of affordability and least cost-sensitive when cost is described in terms of how cheap the medication is compared to others. PMID:27856826

Giving Gifts with a Purpose.

ERIC Educational Resources Information Center

Dillon, Douglas E.

1987-01-01

Gifts can link class discussions to the real world while involving children in reading, travel, or a search for information. They make children more receptive to the teacher, school in general, and ultimately to the subject. Ways to find cheap or free gifts for students are discussed. (MT)

Adhesive strips: a simple and inexpensive trick for finger holding in hand surgery.

PubMed

Brutus, J P; Nikolis, A; Ortiz, S; Cordoba, C

2002-12-01

Many finger holding devices have been developed to retract digits and provide exposure during hand surgery. We describe a simple, and cheap trick to keep fingers out of the way using adhesive strips that has proven efficient and helpful.

Online Learning: Cheap Degrees or Educational Pluralization?

ERIC Educational Resources Information Center

Ragusa, Angela T.; Crampton, Andrea

2017-01-01

In an era of shifting social and communication norms, where 76% of Americans surveyed reported they reached for tablets to check online communication before saying "good morning" to partners (Kensington.com, 2014), online education's increased popularity as a "lifestyle" choice is unsurprising (Ragusa, 2007). Qualitative…

Stress Measurement by Geometrical Optics

NASA Technical Reports Server (NTRS)

Robinson, R. S.; Rossnagel, S. M.

1986-01-01

Fast, simple technique measures stresses in thin films. Sample disk bowed by stress into approximately spherical shape. Reflected image of disk magnified by amount related to curvature and, therefore, stress. Method requires sample substrate, such as cheap microscope cover slide, two mirrors, laser light beam, and screen.

Nietzsche and the Paradox of Postmodern Education

ERIC Educational Resources Information Center

Jackson, Liz

2007-01-01

Postmodernism means different things to different people. Linguistically, it must refer to some sort of reaction to unbridled or overzealously modern attitudes or practices. Charles Jencks shows how postmodern architects, for instance, have reacted against the cheap utilitarian designs they view as symptomatic of "Protestant"…

Counter-Commoditization: Decision Making, Language, Localization

ERIC Educational Resources Information Center

Princen, Thomas

2012-01-01

Commoditization seems immutable and unstoppable but, like other social processes, its prevalence is context dependent. The enabling context for commoditization has been cheap fossil fuels, economic growth, and ever-increasing energy and material throughput. In fact, the scientific findings of ecological, climate, footprint, and material flow…

A GENOME MAY REDUCE YOUR CARBON FOOTPRINT

USDA-ARS?s Scientific Manuscript database

Cheap sequence information will place new emphasis on comparative approaches to mining the data for sequence alterations that lead to physiological contrasts between groups. The data will need to be accessible and coupled with phenotypic data to be made useful for breeders. Increased emphasis on b...

Genotype imputation in a tropical crossbred dairy cattle population

USDA-ARS?s Scientific Manuscript database

The application of new tools, such as genomic selection and genotype imputation, still presents challenges in crossbred populations because relationships of causal variants with markers may vary across breeds. In order to make genomic selection more cost effective, cheap low density chips are often ...

Building a Genome Engineering Toolbox in Non-Model Prokaryotic Microbes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eckert, Carrie A; Freed, Emily; Smolinski, Sharon

The realization of a sustainable bioeconomy requires our ability to understand and engineer complex design principles for the development of platform organisms capable of efficient conversion of cheap and sustainable feedstocks (e.g. sunlight, CO2, non-food biomass) to biofuels and bioproducts at sufficient titers and costs. For model microbes such as E. coli, advances in DNA reading and writing technologies are driving adoption of new paradigms for engineering biological systems. Unfortunately, microbes with properties of interest for the utilization of cheap and renewable feedstocks such as photosynthesis, autotrophic growth, and cellulose degradation have very few, if any, genetic tools for metabolicmore » engineering. Therefore, it is important to begin to develop 'design rules' for building a genetic toolbox for novel microbes. Here, we present an overview of our current understanding of these rules for the genetic manipulation of prokaryotic microbes and available genetic tools to expand our ability to genetically engineer non-model systems.« less

The standardised freight container: vector of vectors and vector-borne diseases.

PubMed

Reiter, P

2010-04-01

The standardised freight container was one of the most important innovations of the 20th Century. Containerised cargoes travel from their point of origin to their destination by ship, road and rail as part of a single journey, without unpacking. This simple concept is the key element in cheap, rapid transport by land and sea, and has led to a phenomenal growth in global trade. Likewise, containerised air cargo has led to a remarkable increase in the inter-continental transportation of goods, particularly perishable items such as flowers, fresh vegetables and live animals. In both cases, containerisation offers great advantages in speed and security, but reduces the opportunity to inspect cargoes in transit. An inevitable consequence is the globalisation of undesirable species of animals, plants and pathogens. Moreover, cheap passenger flights offer worldwide travel for viral and parasitic pathogens in infected humans. The continued emergence of exotic pests, vectors and pathogens throughout the world is an unavoidable consequence of these advances in transportation technology.

Dynamical trade-offs arise from antagonistic coevolution and decrease intraspecific diversity.

PubMed

Huang, Weini; Traulsen, Arne; Werner, Benjamin; Hiltunen, Teppo; Becks, Lutz

2017-12-12

Trade-offs play an important role in evolution. Without trade-offs, evolution would maximize fitness of all traits leading to a "master of all traits". The shape of trade-offs has been shown to determine evolutionary trajectories and is often assumed to be static and independent of the actual evolutionary process. Here we propose that coevolution leads to a dynamical trade-off. We test this hypothesis in a microbial predator-prey system and show that the bacterial growth-defense trade-off changes from concave to convex, i.e., defense is effective and cheap initially, but gets costly when predators coevolve. We further explore the impact of such dynamical trade-offs by a novel mathematical model incorporating de novo mutations for both species. Predator and prey populations diversify rapidly leading to higher prey diversity when the trade-off is concave (cheap). Coevolution results in more convex (costly) trade-offs and lower prey diversity compared to the scenario where only the prey evolves.

Myths and realities of training in obstetric emergencies.

PubMed

Draycott, Timothy J; Collins, Katherine J; Crofts, Joanna F; Siassakos, Dimitrios; Winter, Cathy; Weiner, Carl P; Donald, Fiona

2015-11-01

Training for intrapartum emergencies is a promising strategy to reduce preventable harm during birth; however, not all training is clinically effective. Many myths have developed around such training. These principally derive from misinformed beliefs that all training must be effective, cheap, independent of context and sustainable. The current evidence base for effective training supports local, unit-based and multi-professional training, with appropriate mannequins, and practice-based tools to support the best care. Training programmes based on these principles are associated with improved clinical outcomes, but we need to understand how and why that is, and also why some training is associated with no improvements, or even deterioration in outcomes. Effective training is not cheap, but it can be cost-effective. Insurers have the fiscal power to incentivise training, but they should demand the evidence of clinical effect; aspiration and proxies alone should no longer be sufficient for funding, in any resource setting. Copyright © 2015 Elsevier Ltd. All rights reserved.

Pneumatic Valve Operated by Multiplex Pneumatic Transmission

NASA Astrophysics Data System (ADS)

Nishioka, Yasutaka; Suzumori, Koichi; Kanda, Takefumi; Wakimoto, Shuichi

A pneumatic system has several advantages, which are cheapness, lightweight, and reliability to human and environment. These advantages are adapted to some research areas, such as industrial lines, medical and nursing cares, and rehabilitation tools. However, the pneumatic system needs several devices; compressor, air tube, and control valve. This research aim to downsize pneumatic system. In this paper, a new method of multiplex pneumatic transmission for multi-pneumatic servo system is proposed. The valve for this system consists of two vibrators supported by springs, which was designed with simple and cheap structure. The working principle of the valve is vibrators resonance from multiplex pneumatic transmission and it is possible to work as ON/OFF valves without electric wire. Dynamic simulation was used to confirm the working principle of the resonance driving system. A prototype device confirming the principle was designed and developed based on the simulation. The experiments show that this new control system works very well to control two separated valves through single pneumatic tube.

Ontology-driven education: Teaching anatomy with intelligent 3D games on the web

NASA Astrophysics Data System (ADS)

Nilsen, Trond

Human anatomy is a challenging and intimidating subject whose understanding is essential to good medical practice, taught primarily using a combination of lectures and the dissection of human cadavers. Lectures are cheap and scalable, but do a poor job of teaching spatial understanding, whereas dissection lets students experience the body's interior first-hand, but is expensive, cannot be repeated, and is often imperfect. Educational games and online learning activities have the potential to supplement these teaching methods in a cheap and relatively effective way, but they are difficult for educators to customize for particular curricula and lack the tutoring support that human instructors provide. I present an approach to the creation of learning activities for anatomy called ontology-driven education, in which the Foundational Model of Anatomy, an ontological representation of knowledge about anatomy, is leveraged to generate educational content, model student knowledge, and support learning activities and games in a configurable web-based educational framework for anatomy.

Specialized hybrid learners resolve Rogers' paradox about the adaptive value of social learning.

PubMed

Kharratzadeh, Milad; Montrey, Marcel; Metz, Alex; Shultz, Thomas R

2017-02-07

Culture is considered an evolutionary adaptation that enhances reproductive fitness. A common explanation is that social learning, the learning mechanism underlying cultural transmission, enhances mean fitness by avoiding the costs of individual learning. This explanation was famously contradicted by Rogers (1988), who used a simple mathematical model to show that cheap social learning can invade a population without raising its mean fitness. He concluded that some crucial factor remained unaccounted for, which would reverse this surprising result. Here we extend this model to include a more complex environment and limited resources, where individuals cannot reliably learn everything about the environment on their own. Under such conditions, cheap social learning evolves and enhances mean fitness, via hybrid learners capable of specializing their individual learning. We then show that while spatial or social constraints hinder the evolution of hybrid learners, a novel social learning strategy, complementary copying, can mitigate these effects. Copyright © 2016 Elsevier Ltd. All rights reserved.

Pesticide Vendors in the Informal Sector: Trading Health for Income.

PubMed

Rother, Hanna-Andrea

2016-08-01

South African low-income communities face many challenges (e.g., insufficient housing, poor service delivery, and abject poverty); additionally, a silent challenge of pest infestation plagues these areas resulting in disease risks, nuisances, and stigma. Consequently, an enterprising urban informal sector business has emerged providing residents with highly toxic, effective, cheap, and illegal "street pesticides." These pesticides pose acute and chronic health risks for vendors and residents. The economic opportunity provided by the high demand for effective and cheap pest control results in the high risk of health effects being traded for income. Current measures to control and "regulate" the massive street pesticide sales result in toxic stockpiles and government's "turning a blind eye." Solutions will only be achieved through open dialog identifying and developing non-toxic pest control strategies while ensuring vendors' income; and relevant stakeholder recognition that pest infestation is a social and environmental health determinant needing acknowledgement in different government policies. © The Author(s) 2016.

Electrochemical Sensing toward Trace As(III) Based on Mesoporous MnFe₂O₄/Au Hybrid Nanospheres Modified Glass Carbon Electrode.

PubMed

Zhou, Shaofeng; Han, Xiaojuan; Fan, Honglei; Liu, Yaqing

2016-06-22

Au nanoparticles decorated mesoporous MnFe₂O₄ nanocrystal clusters (MnFe₂O₄/Au hybrid nanospheres) were used for the electrochemical sensing of As(III) by square wave anodic stripping voltammetry (SWASV). Modified on a cheap glass carbon electrode, these MnFe₂O₄/Au hybrid nanospheres show favorable sensitivity (0.315 μA/ppb) and limit of detection (LOD) (3.37 ppb) toward As(III) under the optimized conditions in 0.1 M NaAc-HAc (pH 5.0) by depositing for 150 s at the deposition potential of -0.9 V. No obvious interference from Cd(II) and Hg(II) was recognized during the detection of As(III). Additionally, the developed electrode displayed good reproducibility, stability, and repeatability, and offered potential practical applicability for electrochemical detection of As(III) in real water samples. The present work provides a potential method for the design of new and cheap sensors in the application of electrochemical determination toward trace As(III) and other toxic metal ions.

Building a genome engineering toolbox in nonmodel prokaryotic microbes.

PubMed

Freed, Emily; Fenster, Jacob; Smolinski, Sharon L; Walker, Julie; Henard, Calvin A; Gill, Ryan; Eckert, Carrie A

2018-05-11

The realization of a sustainable bioeconomy requires our ability to understand and engineer complex design principles for the development of platform organisms capable of efficient conversion of cheap and sustainable feedstocks (e.g., sunlight, CO 2 , and nonfood biomass) into biofuels and bioproducts at sufficient titers and costs. For model microbes, such as Escherichia coli, advances in DNA reading and writing technologies are driving the adoption of new paradigms for engineering biological systems. Unfortunately, microbes with properties of interest for the utilization of cheap and renewable feedstocks, such as photosynthesis, autotrophic growth, and cellulose degradation, have very few, if any, genetic tools for metabolic engineering. Therefore, it is important to develop "design rules" for building a genetic toolbox for novel microbes. Here, we present an overview of our current understanding of these rules for the genetic manipulation of prokaryotic microbes and the available genetic tools to expand our ability to genetically engineer nonmodel systems. © 2018 Wiley Periodicals, Inc.

Microbial production of poly(hydroxybutyrate) from C₁ carbon sources.

PubMed

Khosravi-Darani, Kianoush; Mokhtari, Zahra-Beigom; Amai, Tomohito; Tanaka, Kenji

2013-02-01

Polyhydroxybutyrate (PHB) is an attractive substitute for petrochemical plastic due to its similar properties, biocompatibility, and biodegradability. The cost of scaled-up PHB production inhibits its widespread usage. Intensive researches are growing to reduce costs and improve thermomechanical, physical, and processing properties of this green biopolymer. Among cheap substrates which are used for reducing total cost of PHB production, some C₁ carbon sources, e.g., methane, methanol, and CO₂ have received a great deal of attention due to their serious role in greenhouse problem. This article reviews the fundamentals of strategies for reducing PHA production and moves on to the applications of several cheap substrates with a special emphasis on methane, methanol, and CO₂. Also, some explanation for involved microorganisms including the hydrogen-oxidizing bacteria and methanotrophs, their history, culture condition, and nutritional requirements are given. After description of some important strains among the hydrogen-oxidizing and methanotrophic producers of PHB, the article is focused on limitations, threats, and opportunities for application and their future trends.

Quantitative Imaging in Laboratory: Fast Kinetics and Fluorescence Quenching

ERIC Educational Resources Information Center

Cumberbatch, Tanya; Hanley, Quentin S.

2007-01-01

The process of quantitative imaging, which is very commonly used in laboratory, is shown to be very useful for studying the fast kinetics and fluorescence quenching of many experiments. The imaging technique is extremely cheap and hence can be used in many absorption and luminescence experiments.

Purifying Water by Imbibition

NASA Technical Reports Server (NTRS)

Lawton, E. A.

1986-01-01

Concept for purifying water uses absorbent material to remove organic substances. Entire bulk of material employed, not just surface. Proposed purification process uses inexpensive equipment and low energy. Material is methyl acrylate polymer. Material cheap and regenerated by rinsing with methanol or by allowing absorbed compounds to evaporate from it.

Education in the Information Age.

ERIC Educational Resources Information Center

Hay, Lee

1983-01-01

This essay considers the revolutionized education of a projected future of cheap and sophisticated technology. Predictions include a redefinition of literacy and basic skills and a restructuring of educational delivery employing computers to dispense information in order to free teachers to work directly with students on cognitive development.…

Students' Planetarium

ERIC Educational Resources Information Center

Brozis, Mirosaw; Swiderski, Kamil

2018-01-01

Our students built a full-size, mobile planetarium in three weeks. The planetarium was built with commonly available, cheap construction materials. Our priorities were mobility, possibility of quick assembly and reassembly and the students' availability of materials in every place in the world. The students calculated all the parameters of the…

Film Canister Science

ERIC Educational Resources Information Center

Ferstl, Andrew; Schneider, Jamie L.

2007-01-01

Opaque film canisters are readily available, cheap, and useful for scientific inquiry in the classroom. They can also be surprisingly versatile and useful as a tool for stimulating scientific inquiry. In this article, the authors describe inquiry activities using film canisters for preservice teachers, including a "black box" activity and several…

Recycling History: A CD-ROM Project on the Cheap.

ERIC Educational Resources Information Center

McLachlan, Robin; Messing, John

1994-01-01

Reports on CD-ROM product that combines reference and archival material in a low-cost integrated multimedia format. Maintains that, while this project focuses on the Battle of Gallipoli in World War I, the purpose, techniques, and processes can be transferred to other historical topics. (CFR)

Tomorrow's Plastic World

ERIC Educational Resources Information Center

Macdonald, Averil

2005-01-01

Far from being just cheap packaging materials, plastics may be the materials of tomorrow. Plastic can conduct electricity, and this opens up a host of high-tech possibilities in the home and in energy generation. These possibilities are discussed here along with how plastic can be recycled and perhaps even grown.

Against the Corporal Punishment of Children

ERIC Educational Resources Information Center

Clark, John

2004-01-01

John Wilson suggests there are six advantages for corporal punishment: cheap and easy to administer, effective deterrent, effective reform, adjustable pain, fair because of similar dislike of pain, no permanent damage. None of these survive close scrutiny. An alternative, deontological argument against corporal punishment is proposed building on…

Expanding horizons of farming with grass

USDA-ARS?s Scientific Manuscript database

Today’s agriculture and food systems are deeply rooted from the era of cheap energy, an assumption of static climate, and the ability of entities to “externalize” environmental and social costs. The recent collapse of global financial systems has led to more openness to discuss rights and responsib...

A Closer Look at a Metaphor.

ERIC Educational Resources Information Center

Raths, James

1994-01-01

Michael Kirst's article "Strengths and Weaknesses of American Education" in the April 1993 "Kappan" applauds U.S. efforts to become globally competitive. However, assembling cars in Mexico or exporting jobs to Korea blurs the distinction between national/corporate "teams." The issue is not talent but cheap talent.…

Cheap-GSHPs, an European project aiming cost-reducing innovations for shallow geothermal installations. - Geological data reinterpretation

NASA Astrophysics Data System (ADS)

Bertermann, David; Müller, Johannes; Galgaro, Antonio; Cultrera, Matteo; Bernardi, Adriana; Di Sipio, Eloisa

2016-04-01

The success and widespread diffusion of new sustainable technologies are always strictly related to their affordability. Nowadays the energy price fluctuations and the economic crisis are jeopardizing the development and diffusion of renewable technologies and sources. With the aim of both reduce the overall costs of shallow geothermal systems and improve their installation safety, an European project has took place recently, under the Horizon 2020 EU Framework Programme for Research and Innovation. The acronym of this project is Cheap-GSHPs, meaning "cheap and efficient application of reliable ground source heat exchangers and pumps"; the CHEAP-GSHPs project involves 17 partners among 9 European countries such Belgium, France, Germany, Greece, Ireland, Italy, Romania, Spain, Switzerland. In order to achieve the planned targets, an holistic approach is adopted, where all involved elements that take part of shallow geothermal activities are here integrated. In order to reduce the drilling specific costs and for a solid planning basis the INSPIRE-conformal ESDAC data set PAR-MAT-DOM ("parent material dominant") was analysed and reinterpreted regarding the opportunities for cost reductions. Different ESDAC classification codes were analysed lithologically and sedimentologically in order to receive the most suitable drilling technique within different formations. Together with drilling companies this geological data set was translated into a geotechnical map which allows drilling companies the usage of the most efficient drilling within a certain type of underground. The scale of the created map is 1: 100,000 for all over Europe. This leads to cost reductions for the final consumers. Further there will be the definition of different heat conductivity classes based on the reinterpreted PAR-MAT-DOM data set which will provide underground information. These values will be reached by sampling data all over Europe and literature data. The samples will be measured by several different laboratory instruments in variable states of saturation. Literature data are then also compared to the resulting laboratory measurements. All in all this new data set will provide the development of more efficient cost planning tools. It provides detailed underground information on an European-wide level and the dimensioning of a spatial geothermal installation can be optimised. In order to provide a new drilling cost estimation, a new parameter called "drillability" is here suggested; the drillability is based on the drilling time for different type of rocks/sediments. The results are cost reductions which makes geothermal energy solution more attractive for end consumers especially on residential levels.

GPU Multi-Scale Particle Tracking and Multi-Fluid Simulations of the Radiation Belts

NASA Astrophysics Data System (ADS)

Ziemba, T.; Carscadden, J.; O'Donnell, D.; Winglee, R.; Harnett, E.; Cash, M.

2007-12-01

The properties of the radiation belts can vary dramatically under the influence of magnetic storms and storm-time substorms. The task of understanding and predicting radiation belt properties is made difficult because their properties determined by global processes as well as small-scale wave-particle interactions. A full solution to the problem will require major innovations in technique and computer hardware. The proposed work will demonstrates liked particle tracking codes with new multi-scale/multi-fluid global simulations that provide the first means to include small-scale processes within the global magnetospheric context. A large hurdle to the problem is having sufficient computer hardware that is able to handle the dissipate temporal and spatial scale sizes. A major innovation of the work is that the codes are designed to run of graphics processing units (GPUs). GPUs are intrinsically highly parallelized systems that provide more than an order of magnitude computing speed over a CPU based systems, for little more cost than a high end-workstation. Recent advancements in GPU technologies allow for full IEEE float specifications with performance up to several hundred GFLOPs per GPU and new software architectures have recently become available to ease the transition from graphics based to scientific applications. This allows for a cheap alternative to standard supercomputing methods and should increase the time to discovery. A demonstration of the code pushing more than 500,000 particles faster than real time is presented, and used to provide new insight into radiation belt dynamics.

A Design of Experiment approach to predict product and process parameters for a spray dried influenza vaccine.

PubMed

Kanojia, Gaurav; Willems, Geert-Jan; Frijlink, Henderik W; Kersten, Gideon F A; Soema, Peter C; Amorij, Jean-Pierre

2016-09-25

Spray dried vaccine formulations might be an alternative to traditional lyophilized vaccines. Compared to lyophilization, spray drying is a fast and cheap process extensively used for drying biologicals. The current study provides an approach that utilizes Design of Experiments for spray drying process to stabilize whole inactivated influenza virus (WIV) vaccine. The approach included systematically screening and optimizing the spray drying process variables, determining the desired process parameters and predicting product quality parameters. The process parameters inlet air temperature, nozzle gas flow rate and feed flow rate and their effect on WIV vaccine powder characteristics such as particle size, residual moisture content (RMC) and powder yield were investigated. Vaccine powders with a broad range of physical characteristics (RMC 1.2-4.9%, particle size 2.4-8.5μm and powder yield 42-82%) were obtained. WIV showed no significant loss in antigenicity as revealed by hemagglutination test. Furthermore, descriptive models generated by DoE software could be used to determine and select (set) spray drying process parameter. This was used to generate a dried WIV powder with predefined (predicted) characteristics. Moreover, the spray dried vaccine powders retained their antigenic stability even after storage for 3 months at 60°C. The approach used here enabled the generation of a thermostable, antigenic WIV vaccine powder with desired physical characteristics that could be potentially used for pulmonary administration. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Ubiquitous Monitoring of Electrical Household Appliances

PubMed Central

Lloret, Jaime; Macías, Elsa; Suárez, Alvaro; Lacuesta, Raquel

2012-01-01

The number of appliances at home is increasing continuously, mainly because they make our lives easier. Currently, technology is integrated in all objects of our daily life. TCP/IP let us monitor our home in real time and check ubiquitously if something is happening at home. Bearing in mind this idea, we have developed a low-cost system, which can be used in any type of electrical household appliance that takes information from the appliance and posts the information to the Twitter Social network. Several sensors placed in the household appliances gather the sensed data and send them wired or wirelessly, depending on the case, using small and cheap devices to a gateway located in the home. This gateway takes decisions, based on the received data, and sends notifications to Twitter. We have developed a software application that takes the values and decides when to issue an alarm to the registered users (Twitter friends of our smart home). The performance of our system has been measured taking into account the home network (using IEEE 802.3u and IEEE 802.11g) and the data publishing in Twitter. As a result, we have generated an original product and service for any electrical household appliance, regardless of the model and manufacturer, that helps home users improve their quality of life. The paper also shows that there is no system with the same innovative features like the ones presented in this paper. PMID:23202205

Developing Distance Learning Courses in a "Traditional" University.

ERIC Educational Resources Information Center

Lawton, Sally; Barnes, Richard

1998-01-01

Comparison of distance learning that was developed with a business-planning approach (market research, cost-benefit analysis, feasibility study, strategic marketing) with one that did not use these techniques showed that business planning ensures that distance-learning courses are not viewed as a "cheap" option. The method identifies…

"Cheap" "c'est quoi"? Immigrant Teenagers in Quest of Multilingual Competence and Identity

ERIC Educational Resources Information Center

Kasanga, Luanga Adrien

2008-01-01

Second generation immigrants tend to shift their loyalty from their own languages ("immigrant language") to the language of the host country ("societal language"), given the socioeconomically weak vitality position of the immigrant languages. This language shift makes intergenerational communication, especially with folk left…

Radiant energy dosimeter for field use

Treesearch

A. Broido; A.W. McMasters

1967-01-01

Thermal radiation measurements in Project Flambeau fires involved a limited number of conventional radiometers located outside the fire periphery. A simple, cheap, easily-fabricated, light-weight, self-contained, rugged dosimeter was desired to withstand a hot fire environment, including a specific energy input of 5,000 cal cm -2, and to record...

A Simple Experimental Setup to Clearly Show that Light Does Not Recombine After Passing Through Two Prisms

NASA Astrophysics Data System (ADS)

Garcia-Molina, Rafael; del Mazo, Alejandro; Velasco, Santiago

2018-01-01

We present a simple and cheap experimental setup that clearly shows how the colors of the white light spectrum after passing a prism do not recombine when emerging from an identical second prism, as it is still found in many references.

Corn stover hydrolysate, a lignocellulosic feedstock for polyhydroxyalkanoate biosynthesis: property manipulation using a co-feed strategy with levulinic acid

USDA-ARS?s Scientific Manuscript database

Lignocellulosic feedstocks are interesting materials for bio-based product synthesis because of their availability and cheap cost. Our laboratory utilized corn stover hydrolysate (CSH) as a base feedstock for bacterially-derived polyhydroxyalkanoate biopolymer synthesis. Burkholderia sacchari DSM 17...

Balancing Beams--For a Few Moments

ERIC Educational Resources Information Center

Kibble, Bob

2008-01-01

A 2 m long wooden beam provides an ideal demonstration tool for exploring moments. A class set is cheap and can be used at introductory and advanced levels. This article explores how such beams can be used to support learning about moments, equilibrium, vectors, and simultaneous equations. (Contains 7 figures.)

Vesicle Stability and Dynamics: An Undergraduate Biochemistry Laboratory

ERIC Educational Resources Information Center

Del Bianco, Cristina; Torino, Domenica; Mansy, Sheref S.

2014-01-01

A laboratory exercise is described that helps students learn about lipid self-assembly by making vesicles under different solution conditions. Concepts covering the chemical properties of different lipids, the dynamics of lipids, and vesicle stability are explored. Further, the described protocol is easy and cheap to implement. One to two…

Using Dragonflies as Common, Flexible & Charismatic Subjects for Teaching the Scientific Process

ERIC Educational Resources Information Center

Switzer, Paul V.

2007-01-01

Biology laboratories are usually designed around convenient and available subjects. For example, for animal laboratories "Daphnia magna," "Drosophila melanogaster," frogs, rats, and mice are common animals that are relatively easy to obtain, relatively cheap, and consequently lend themselves well to laboratory experimentation. On many campuses, …

A Simple Experimental Setup to Clearly Show That Light Does Not Recombine after Passing through Two Prisms

ERIC Educational Resources Information Center

Garcia-Molina, Rafael; del Mazo, Alejandro; Velasco, Santiago

2018-01-01

We present a simple and cheap experimental setup that clearly shows how the colors of the white light spectrum after passing a prism do not recombine when emerging from an identical second prism, as it is still found in many references.

BOOK REVIEW: HANDBOOK OF URBAN HEALTH: POPULATIONS, METHODS AND PRACTICE

EPA Science Inventory

In Clifford D. Simak's 1952 science fiction classic, City, the metropolis is dead by the end of the 20th century. Cheap atomic power and ubiquitous private helicopters have made concentrated human existence a quaint memory. Simak could not have been more wrong, of course. About h...

The Dark Side of Illegal Immigration: Cause for National Concern

DTIC Science & Technology

2007-02-28

was officially terminated in 1964. However, illegal aliens were recruited in large numbers well after the Bracero program .24 For almost ten years...Mexico has its official roots in the demise of the Bracero program . Employers had become accustomed to cheap Mexican labor and were willing to ignore

Army Energy Strategy for the End of Cheap Oil

DTIC Science & Technology

2006-11-01

increased fuel efficiency in any Army vehicles or other power generation equipment. This oversight results in a logistics system where, “over 70...become a victim of increasing energy costs. Living close to one’s job location as well as both telecommuting and teleconferencing will become the

Virtue...On the Cheap.

ERIC Educational Resources Information Center

Hunter, James Davison

2002-01-01

Discusses the neo-classical backlash to a therapeutic liberalism in moral education that has attempted to revive the character education system established in the early decades of the 20th century. Notes the importance of generating habits of good moral conduct, then discusses literature and moral understanding, the move from theory to practical…

Words Aren't Cheap

ERIC Educational Resources Information Center

Rockwell, Mark

2011-01-01

Textbooks are a crushingly substantial portion of students' costs every semester, and they're getting more expensive every year. With the cost of some individual textbooks surpassing a monthly cable television bill, students are moving to relieve that economic pressure by renting textbooks instead of buying them new or used. The idea of renting…

R&D 100, 2016: Falling Particle Receiver

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ho, Cliff; Christian, Joshua; Stein, Wesley

After several years of design and development, the world's first continuously recirculating high-temperature Falling Particle Receiver for Concentrated Solar Energy was constructed and tested at Sandia National Laboratories. This technology enables clean, renewable energy and electricity on demand with cheap, efficient storage at costs comparable with fossil-fuel-based plants.

Design in Relief

ERIC Educational Resources Information Center

Pierce, Brian

2009-01-01

It seems like everybody's "going green" these days. People do what they can to save the environment. Their cars are greener, their buildings are greener, even their clothes are greener. But what about going "brown"? It's cheap, it's readily available, and it has endless uses--especially in art. It's cardboard. The author describes a project that…

Multiresidue analysis of pesticides in straw roughage by liquid chromatography - tandem mass spectrometry

USDA-ARS?s Scientific Manuscript database

A multiresidue analytical method using a modification of the “quick, easy, cheap, effective, rugged, and safe” (QuEChERS) sample preparation approach combined with liquid chromatography–tandem mass spectrometry (LC-MS/MS) analysis was established and validated for the rapid determination of 69 pesti...

The Education Smokescreen.

ERIC Educational Resources Information Center

Weisman, Jonathan

1992-01-01

As success of one Toyota-managed auto plant shows, U.S. workers can produce as effectively and competitively when given good, work-specific training and a well-managed environment. By blaming their own faltering performance on inadequate work force skills, the nation's top chief executives have found a cheap, convenient way to scapegoat U.S.…

Fetal Alcohol Syndrome & Effects: A Continuing Education Offering

DTIC Science & Technology

1988-01-01

feeble, and distempered children" (Robe, 1982). Cheap gin had flooded the country, permitting alcohol to be used heavily by many who previously had not had...cause of weak, feeble,- and distempered children." 1787 America Dr. Benjamin Rush spoke out against alcohol use by pregnant women because he feared

Simple Library Bookkeeping.

ERIC Educational Resources Information Center

Hoffman, Herbert H.

A simple and cheap manual double entry continuous transaction posting system with running balances is developed for bookkeeping by small libraries. A very small library may operate without any system of fiscal control but when a library's budget approaches three figures, some kind of bookkeeping must be introduced. To maintain control over his…

Catalysts for the decomposition of hydrazine, hydrazine derivatives and mixtures of both

NASA Technical Reports Server (NTRS)

Sasse, R.

1986-01-01

This invention concerns a catalyst designed for the decomposition of hydrazine, hydrazine derivatives and mixtures of the two. The objective is to develop a catalyst of the type described that is cheap and easy to produce and is also characterized by extremely short response times.

Rock Core Tests, Proposed Duplicate Lock-Phase 2, Starved Rock Lock and Dam, Illinois River, Illinois

DTIC Science & Technology

1975-06-01

defined as being rlppable to marginally rippable by Caterpillar Tractor Company. A cheap, fast seismic refraction survey could verify that this is an...Ore RIPPABLE MARGINAL NGN RIPPABLE Figure 4. Rippability ranges for typical rock types - D9G caterpillar (from performance manual

R&D 100, 2016: Falling Particle Receiver

ScienceCinema

Ho, Cliff; Christian, Joshua; Stein, Wesley

2018-06-13

After several years of design and development, the world's first continuously recirculating high-temperature Falling Particle Receiver for Concentrated Solar Energy was constructed and tested at Sandia National Laboratories. This technology enables clean, renewable energy and electricity on demand with cheap, efficient storage at costs comparable with fossil-fuel-based plants.

A near-infrared spectroscopy routine for unambiguous identification of cryptic ant species

USDA-ARS?s Scientific Manuscript database

The identification of species – of importance for most biological disciplines – is not always straightforward as cryptic species present a hurdle for traditional species discrimination. Fibre-optic near-infrared spectroscopy (NIRS) is a rapid and cheap method for a wide range of different applicatio...

Carbon sorbent based on flax boon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abramov, M.V.; Tyulina, R.M.; Yaroslavtsev, V.T.

1994-11-10

Flax-fiber production wastes such as boon can be used effectively as the starting material for producing carbon sorbents. Activated carbons are among the most widely used sorbents in industrial wastewater and waste gas treatment. A single-stage process has been developed for producing an efficient, cheap carbon sorbent based on flax boon.

Is Optimism Real?

ERIC Educational Resources Information Center

Simmons, Joseph P.; Massey, Cade

2012-01-01

Is optimism real, or are optimistic forecasts just cheap talk? To help answer this question, we investigated whether optimistic predictions persist in the face of large incentives to be accurate. We asked National Football League football fans to predict the winner of a single game. Roughly half (the partisans) predicted a game involving their…

Recovery Act - An Interdisciplinary Program for Education and Outreach in Transportation Electrification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Carl; Bohmann, Leonard; Naber, Jeffrey

2013-01-30

1) How the project adds to the education of engineering students in the area of vehicle electrification: This project created and implemented a significant interdisciplinary curriculum in HEV engineering that includes courses focused on the major components (engines, battery cells, e-machines, and power electronics). The new curriculum, rather uniquely, features two new classes and two new labs that emphasize a vehicle level integration of a hybrid electric powertrain that parallels the vehicle development process used by the OEMs - commercial grade software is used to design a hybrid electric vehicle, hardware-in-the-loop testing is performed on each component until the entiremore » powertrain is optimized, the calibration is flashed to a vehicle, ride-and-drives are executed including on board data acquisition. In addition, nine existing courses were modified by adding HEV material to the courses. 2) The educational effectiveness and economic feasibility of the new curriculum: The new courses are offered at both the undergraduate and graduate levels. They are listed across the college in mechanical, chemical, electrical, and materials science and engineering. They are offered both on campus and to distance learning students. Students across the college of engineering and at all degree levels are integrating these courses into their degree programs. Over the three year project the course enrollments on-campus has totaled 1,249. The distance learning enrollments has totaled 315. With such robust enrollments we absolutely expect that these courses will be in the curriculum for the long run. 3) How the project is otherwise of benefit to the public: One outcome of the project is the construction of the Michigan Tech Mobile Lab. Two complete HEV dynamometer test cells, and four work stations are installed in the 16.2 meter Mobile Laboratory and hauled by a class 8 truck. The Mobile Lab is used to teach the university courses. It is also used to deliver short courses to industry, K-12 outreach, and public education. In 2012 the Mobile Lab participated in 22 outreach events, locally, throughout Michigan, and including events in Washington DC, Illinois, and Wisconsin. The Mobile Lab is a hit wherever it goes. In 2013 we will partner with the US Army TARDEC and be featured in their Green Warrior Convoy, a ten city tour starting in Detroit and finishing in Washington DC.« less

Health Monitoring Survey of Bell 412EP Transmissions

NASA Technical Reports Server (NTRS)

Tucker, Brian E.; Dempsey, Paula J.

2016-01-01

Health and usage monitoring systems (HUMS) use vibration-based Condition Indicators (CI) to assess the health of helicopter powertrain components. A fault is detected when a CI exceeds its threshold value. The effectiveness of fault detection can be judged on the basis of assessing the condition of actual components from fleet aircraft. The Bell 412 HUMS-equipped helicopter is chosen for such an evaluation. A sample of 20 aircraft included 12 aircraft with confirmed transmission and gearbox faults (detected by CIs) and eight aircraft with no known faults. The associated CI data is classified into "healthy" and "faulted" populations based on actual condition and these populations are compared against their CI thresholds to quantify the probability of false alarm and the probability of missed detection. Receiver Operator Characteristic analysis is used to optimize thresholds. Based on the results of the analysis, shortcomings in the classification method are identified for slow-moving CI trends. Recommendations for improving classification using time-dependent receiver-operator characteristic methods are put forth. Finally, lessons learned regarding OEM-operator communication are presented.

Future Automotive Aftertreatment Solutions: The 150°C Challenge Workshop Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zammit, Michael; DiMaggio, Craig L.; Kim, Chang H.

2013-10-15

With future fuel economy standards enacted, the U.S. automotive manufacturers (OEMs) are committed to pursuing a variety of high risk/highly efficient stoichiometric and lean combustion strategies to achieve superior performance. In recognition of this need, the U.S. Department of Energy (DOE) has partnered with domestic automotive manufacturers through U.S. DRIVE to develop these advanced technologies. However, before these advancements can be introduced into the U.S. market, they must also be able to meet increasingly stringent emissions requirements. A significant roadblock to this implementation is the inability of current catalyst and aftertreatment technologies to provide the required activity at the muchmore » lower exhaust temperatures that will accompany highly efficient combustion processes and powertrain strategies. Therefore, the goal of this workshop and report is to create a U.S. DRIVE emission control roadmap that will identify new materials and aftertreatment approaches that offer the potential for 90% conversion of emissions at low temperature (150°C) and are consistent with highly efficient combustion technologies currently under investigation within U.S. DRIVE Advanced Combustion and Emission Control (ACEC) programs.« less

Swept Light Sources

NASA Astrophysics Data System (ADS)

Johnson, Bart; Atia, Walid; Kuznetsov, Mark; Cook, Christopher; Goldberg, Brian; Wells, Bill; Larson, Noble; McKenzie, Eric; Melendez, Carlos; Mallon, Ed; Woo, Seungbum; Murdza, Randal; Whitney, Peter; Flanders, Dale

A 1060 nm OEM laser "engine", manufactured by Axsun Technologies, is described. It consists of a swept laser and control electronics coupled with a balanced receiver, k-clock, and a 550 MS/s data acquisition board. The laser's passive mode-locking behavior induced by the rapid wavelength sweep is discussed. As they pass though the gain medium, each pulse is shifted to longer wavelength due to the rise in refractive index associated with gain depletion. New, longer wavelengths, are thus created by nonlinear means rather than by building up anew from spontaneous emission. This nonlinear mechanism enables low noise operation and fast sweep rates. The so-called "coherence revival" phenomenon associated with interference between neighboring mode-locked pulses, is discussed. Typical laser and system data is shown, including k-clock frequency, trigger waveform, pulsed and average output powers and RIN. Receiver and DAQ board noise performance is quantified. The laser RIN is estimated to be lower than -150 dB/Hz. A typical shot-noise-limited sensitivity of 103 dB is achieved for 1.9 mW sample power. The engine is designed for ophthalmic imaging and retinal images from prototype commercial systems are presented.

Recovery Act Final Project Report -- Transportation Electrification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gogineni, Kumar

2013-12-31

ChargePoint America demonstrated the viability, economic and environmental benefits of an electric vehicle-charging infrastructure. Electric vehicles (EVs) and plug-in electric vehicles (PHEVs) arrived in late 2010, there was a substantial lack of infrastructure to support these vehicles. ChargePoint America deployed charging infrastructure in ten (10) metropolitan regions in coordination with vehicle deliveries targeting those same regions by our OEM partners: General Motors, Nissan, Fisker Automotive, Ford, smart USA, and BMW. The metropolitan regions include Central Texas (Austin/San Antonio), Bellevue/Redmond (WA), Southern Michigan, Los Angeles area (CA), New York Metro (NY), Central Florida (Orlando/Tampa), Sacramento (CA), San Francisco/San Jose (CA), Washingtonmore » DC and Boston (MA). ChargePoint America installed more than 4,600 Level 2 (220v) SAE J1772™ UL listed networked charging ports in home, public and commercial locations to support approximately 2000 program vehicles. ChargePoint collected data to analyze how individuals, businesses and local governments used their vehicles. Understanding driver charging behavior patterns will provide the DoE with critical information as EV adoption increases in the United States.« less

Virtual environment assessment for laser-based vision surface profiling

NASA Astrophysics Data System (ADS)

ElSoussi, Adnane; Al Alami, Abed ElRahman; Abu-Nabah, Bassam A.

2015-03-01

Oil and gas businesses have been raising the demand from original equipment manufacturers (OEMs) to implement a reliable metrology method in assessing surface profiles of welds before and after grinding. This certainly mandates the deviation from the commonly used surface measurement gauges, which are not only operator dependent, but also limited to discrete measurements along the weld. Due to its potential accuracy and speed, the use of laser-based vision surface profiling systems have been progressively rising as part of manufacturing quality control. This effort presents a virtual environment that lends itself for developing and evaluating existing laser vision sensor (LVS) calibration and measurement techniques. A combination of two known calibration techniques is implemented to deliver a calibrated LVS system. System calibration is implemented virtually and experimentally to scan simulated and 3D printed features of known profiles, respectively. Scanned data is inverted and compared with the input profiles to validate the virtual environment capability for LVS surface profiling and preliminary assess the measurement technique for weld profiling applications. Moreover, this effort brings 3D scanning capability a step closer towards robust quality control applications in a manufacturing environment.

Study on application of dynamic monitoring of land use based on mobile GIS technology

NASA Astrophysics Data System (ADS)

Tian, Jingyi; Chu, Jian; Guo, Jianxing; Wang, Lixin

2006-10-01

The land use dynamic monitoring is an important mean to maintain the real-time update of the land use data. Mobile GIS technology integrates GIS, GPS and Internet. It can update the historic al data in real time with site-collected data and realize the data update in large scale with high precision. The Monitoring methods on the land use change data with the mobile GIS technology were discussed. Mobile terminal of mobile GIS has self-developed for this study with GPS-25 OEM and notebook computer. The RTD (real-time difference) operation mode is selected. Mobile GIS system of dynamic monitoring of land use have developed with Visual C++ as operation platform, MapObjects control as graphic platform and MSCmm control as communication platform, which realizes organic integration of GPS, GPRS and GIS. This system has such following basic functions as data processing, graphic display, graphic editing, attribute query and navigation. Qinhuangdao city was selected as the experiential area. Shown by the study result, the mobile GIS integration system of dynamic monitoring of land use developed by this study has practical application value.

The writing on the wall.

PubMed

Bourne, Henry R

2013-03-26

The biomedical research enterprise in the US has become unsustainable and urgent action is needed to address a variety of problems, including a lack of innovation, an over-reliance on soft money for faculty salaries, the use of graduate students as a source of cheap labour, and a 'holding tank' full of talented postdocs with limited career opportunities.

"Dirt Cheap" Project Teaches Soils Engineering

ERIC Educational Resources Information Center

Roman, Harry T.

2010-01-01

This article describes a soil-testing activity that enables students to learn some interesting and useful things about how soil behaves under varied conditions. It offers a great way to give them a practical pre-engineering experience and will show them how engineers think about construction and how local soils influence building design. The…

In Vietnam, Manufacturing Masterworks

ERIC Educational Resources Information Center

Overland, Martha Ann

2006-01-01

Vietnam, with its cheap labor and lax copyright laws, is a counterfeiter's dream. Books are sold hot off the photocopier and Hollywood's latest blockbusters can be had on DVD's for about a dollar. But it is in art forgery that Vietnam excels. With a stable of neoclassically trained art students, who spend years learning to copy the masters, art…

"Small Talk Is Not Cheap": Phatic Computer-Mediated Communication in Intercultural Classes

ERIC Educational Resources Information Center

Maíz-Arévalo, Carmen

2017-01-01

The present study aims to analyse the phatic exchanges performed by a class of nine intercultural Master's students during a collaborative assignment which demanded online discussion using English as a lingua franca (ELF). Prior studies on the use of phatic communication in computer-mediated communication have concentrated on social networking…

Measuring Boltzmann's Constant with Carbon Dioxide

ERIC Educational Resources Information Center

Ivanov, Dragia; Nikolov, Stefan

2013-01-01

In this paper we present two experiments to measure Boltzmann's constant--one of the fundamental constants of modern-day physics, which lies at the base of statistical mechanics and thermodynamics. The experiments use very basic theory, simple equipment and cheap and safe materials yet provide very precise results. They are very easy and…

Teaching Old Dogs New Tricks: The Luxury of Digital Abundance

ERIC Educational Resources Information Center

O'Brien, David; Scharber, Cassandra

2010-01-01

Today we thrive on an abundance of relatively cheap computing power and have the luxury of wasting most of it. It is quickly becoming not only possible but also financially sound, for educators to significantly complement, supplement, or even replace traditional print curricula with digital print and media, online curricula and websites, and…

Automatic Electronic Oxygen Supply

PubMed Central

Ford, Patricia; Hoodless, D. J.

1971-01-01

An automatic electronic oxygen system has been devised to supply an intensive care unit with a “fail-safe” supply of continuous oxygen. All parts of the system are fitted with alarms, as the oxygen powers gas-driven ventilators. Since the system is cheap it can be installed in hospitals where finance is limited. PMID:5278618

Toward a Critical-Sentimental Orientation in Human Rights Education

ERIC Educational Resources Information Center

Zembylas, Michalinos

2016-01-01

This paper addresses one of the challenges in human rights education (HRE) concerning the conceptualization of a pedagogical orientation that avoids both the pitfalls of a purely juridical address and a "cheap sentimental" approach. The paper uses as its point of departure Richard Rorty's key intervention on human rights discourse and…

Estimating the Wavelength of Sodium Emission in Flame--The Easy Way

ERIC Educational Resources Information Center

Wahab, M. Farooq

2009-01-01

Simple "box spectroscopes" are not new. Different methods of building them at home using cheap diffraction gratings have been described. However, their use has often been confined to looking at street lights, discharge tubes, and enjoying the beautiful spectra of various lamps. Construction of the box spectroscope usually involves a narrow slit…

Effects of temperature and purity of magnesium sulfate during extraction of pesticides residues using the QuEChERS method

USDA-ARS?s Scientific Manuscript database

Despite its many documented advantages, the QuEChERS (quick, easy, cheap, effective, rugged and safe) sample preparation approach has problems with a few unstable pesticides, partly due to the exothermic reaction generated by the use of anhydrous magnesium sulfate during extraction. These pesticide...

Ussr Report, International Affairs

DTIC Science & Technology

1986-04-28

The British also needed the cheap labour power of Chinese coolies, who were employed in tin mines. Many Chinese workers also laboured on ...machinery plant in Glogow has been manufacturing this type of equipment for a number of years on . the basis of blueprints supplied by the Kobylec Institute...relationships among the socialist countries at the stage of

Building the Best Auditorium

ERIC Educational Resources Information Center

Sturgeon, Julie

2008-01-01

Building a quality auditorium has never come at a cheap price. In today's economy, a $750,000 minimum price tag just for sound, lighting, stage rigging and seats can be exorbitant. However, schools that have built new auditoriums or upgraded existing ones in the past decade say the investment is worth every penny. This article discusses the…

X-Ray Detection Visits the Classroom

ERIC Educational Resources Information Center

Peralta, Luis; Farinha, Ana; Pinto, Ana

2008-01-01

Film has been used to detect x-rays since the early days of their discovery by Rontgen. Although nowadays superseded by other techniques, film still provides a cheap means of x-ray detection, making it attractive in high-school or undergraduate university courses. If some sort of quantitative result is required, the film's optical absorbance or…

Introducing Human Population Biology through an Easy Laboratory Exercise on Mitochondrial DNA

ERIC Educational Resources Information Center

Pardinas, Antonio F.; Dopico, Eduardo; Roca, Agustin; Garcia-Vazquez, Eva; Lopez, Belen

2010-01-01

This article describes an easy and cheap laboratory exercise for students to discover their own mitochondrial haplogroup. Students use buccal swabs to obtain mucosa cells as noninvasive tissue samples, extract DNA, and with a simple polymerase chain reaction-restriction fragment length polymorphism analysis they can obtain DNA fragments of…

Fast Quasi-Adiabatic Gas Cooling: An Experiment Revisited

ERIC Educational Resources Information Center

Oss, S.; Gratton, L. M.; Calza, G.; Lopez-Arias, T.

2012-01-01

The well-known experiment of the rapid expansion and cooling of the air contained in a bottle is performed with a rapidly responsive, yet very cheap thermometer. The adiabatic, low temperature limit is approached quite closely and measured with our apparatus. A straightforward theoretical model for this process is also presented and discussed.…

AuPd/polyaniline as the anode in an ethylene glycol microfluidic fuel cell operated at room temperature.

PubMed

Arjona, N; Palacios, A; Moreno-Zuria, A; Guerra-Balcázar, M; Ledesma-García, J; Arriaga, L G

2014-08-04

AuPd/polyaniline was used for the first time, for ethylene glycol (EG) electrooxidation in a novel microfluidic fuel cell (MFC) operated at room temperature. The device exhibits high electrocatalytic performance and stability for the conversion of cheap and fully available EG as fuel.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyer, W.H.

The last several centuries have led humanity to believe that each succeeding generation can expect to live better than did the previous generation. But this is no longer true, and, to survive, the human species must successfully face four impending crises: overpopulation, the destruction of the biosphere, the end of cheap and available energy, and the threat of thermonuclear holocaust.