Sample records for chemical analysis table

  1. An Investigation of the Effects of Deposit Feeding Invertebrates on the Structural Properties of Clay Minerals.

    DTIC Science & Technology

    1981-07-01

    Dennis M. Lavoie of NORDA for chemical analysis of clay minerals with the x-ray energy dispersive spectrometer. We thank Fred Bowles, Peter Fleischer...diffractograi of Nuculana acuta fecal pellet 11 residue (illite experiment). TABLES TABLE 1. X-ray energy dispersive spectrometer chemical 8 analysis for...inontmorillonite experiments. Counts for elements after background counts removed. TABLE 2. X-ray energy dispersive spectroneter chemical analysis 12 for

  2. Generator Set Durability Testing Using 25% ATJ Fuel Blend

    DTIC Science & Technology

    2016-02-01

    Table Page Table 1. Chemical & Physical Properties of Evaluated 25% ATJ Blend .................................................... 3 Table 2... Chemical & Physical Properties of Evaluated 25% ATJ Blend .................................................... 4 Table 3. Chemical & Physical...Properties of Evaluated 25% ATJ Blend .................................................... 5 Table 4. Chemical & Physical Properties of Evaluated 25

  3. 40 CFR Table 1 to Subpart F of... - Synthetic Organic Chemical Manufacturing Industry Chemicals

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 10 2013-07-01 2013-07-01 false Synthetic Organic Chemical... Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 1 Table 1 to Subpart F of Part 63—Synthetic Organic Chemical Manufacturing Industry Chemicals Chemical name a CAS No. b Group Acenaphthene...

  4. 40 CFR Table 1 to Subpart F of... - Synthetic Organic Chemical Manufacturing Industry Chemicals

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 10 2014-07-01 2014-07-01 false Synthetic Organic Chemical... Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 1 Table 1 to Subpart F of Part 63—Synthetic Organic Chemical Manufacturing Industry Chemicals Chemical name a CAS No. b Group Acenaphthene...

  5. 40 CFR Table 1 to Subpart F of... - Synthetic Organic Chemical Manufacturing Industry Chemicals

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 10 2012-07-01 2012-07-01 false Synthetic Organic Chemical... Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 1 Table 1 to Subpart F of Part 63—Synthetic Organic Chemical Manufacturing Industry Chemicals Chemical name a CAS No. b Group Acenaphthene...

  6. 40 CFR Table 1 to Subpart F of... - Synthetic Organic Chemical Manufacturing Industry Chemicals

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 9 2011-07-01 2011-07-01 false Synthetic Organic Chemical... Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 1 Table 1 to Subpart F of Part 63—Synthetic Organic Chemical Manufacturing Industry Chemicals Chemical name a CAS No. b Group Acenaphthene...

  7. [Sterilization effect analysis of B-class pulsation table top vacuum sterilizer to dental handpieces].

    PubMed

    Zeng, Shu-Rong; Jiang, Bo; Xiao, Xiao-Rong

    2007-06-01

    Discuss sterilization effect of B-class pulsation table top vacuum pressure steam sterilizer for dental handpiece. Analysis selection of sterilizer for dental handpiece and sterilization management processes and sterilization effect monitoring, evaluation of monitoring result and effective sterilization method. The B-class pulsation table top vacuum pressure steam sterilizer to dental handpiece in West China Stomatological Hospital of Sichuan University met the requirement of the chemical and biological monitoring. Its efficiency of sterilization was 100%. The results of aerobic culture, anaerobic culture, B-type hepatitis mark monitoring to sterilized dental handpiece were negative. It is effective method for dental handpiece sterilization to use B-class pulsation table top vacuum pressure steam sterilizer.

  8. U.S. Army Base Closure Program, Final Decision Document, Cameron Station, Alexandria, Virginia

    DTIC Science & Technology

    1993-11-01

    POTENTIAL CONCERN AT THE CAMERON STATION SITE TABLE 2-7 CHEMICALS CONTRIBUTING TO EXCESS CANCER RISK AT A PATHWAY LEVEL OF 1E-6 OR GREATER TABLE 2-8...CANCER RISK AT A PATHWAY LEVEL OF 1E-6 OR GREATER TABLE 2-8 SUMMARY OF DETAILED ANALYSIS OU-1 PCB TRANSFORMER SERVICE, STORAGE AND SPILL AREAS TABLE 2-9...Restrictions MCL Maximum Contaminant Level mg milligram 3001riOOh:bfsrod~acronyms.Ri November 18, 1993 v LIST OF ACRONYMS AND ABBREVIATIONS, CONTINUED O&M

  9. 40 CFR Table 1 to Subpart Vvvvvv... - Hazardous Air Pollutants Used To Determine Applicability of Chemical Manufacturing Operations

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Determine Applicability of Chemical Manufacturing Operations 1 Table 1 to Subpart VVVVVV of Part 63... Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 1 Table 1 to Subpart VVVVVV of Part 63—Hazardous Air Pollutants Used To Determine Applicability of...

  10. 40 CFR Table 1 to Subpart Vvvvvv... - Hazardous Air Pollutants Used To Determine Applicability of Chemical Manufacturing Operations

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Determine Applicability of Chemical Manufacturing Operations 1 Table 1 to Subpart VVVVVV of Part 63... Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 1 Table 1 to Subpart VVVVVV of Part 63—Hazardous Air Pollutants Used To Determine Applicability of...

  11. 40 CFR Table 1 to Subpart Vvvvvv... - Hazardous Air Pollutants Used To Determine Applicability of Chemical Manufacturing Operations

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Determine Applicability of Chemical Manufacturing Operations 1 Table 1 to Subpart VVVVVV of Part 63... Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 1 Table 1 to Subpart VVVVVV of Part 63—Hazardous Air Pollutants Used To Determine Applicability of...

  12. 40 CFR Table 1 to Subpart Vvvvvv... - Hazardous Air Pollutants Used To Determine Applicability of Chemical Manufacturing Operations

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Determine Applicability of Chemical Manufacturing Operations 1 Table 1 to Subpart VVVVVV of Part 63... Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 1 Table 1 to Subpart VVVVVV of Part 63—Hazardous Air Pollutants Used To Determine Applicability of...

  13. 40 CFR Table 1 to Subpart Vvvvvv... - Hazardous Air Pollutants Used To Determine Applicability of Chemical Manufacturing Operations

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Determine Applicability of Chemical Manufacturing Operations 1 Table 1 to Subpart VVVVVV of Part 63... Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 1 Table 1 to Subpart VVVVVV of Part 63—Hazardous Air Pollutants Used To Determine Applicability of...

  14. User's Guide to Handlens - A Computer Program that Calculates the Chemistry of Minerals in Mixtures

    USGS Publications Warehouse

    Eberl, D.D.

    2008-01-01

    HandLens is a computer program, written in Excel macro language, that calculates the chemistry of minerals in mineral mixtures (for example, in rocks, soils and sediments) for related samples from inputs of quantitative mineralogy and chemistry. For best results, the related samples should contain minerals having the same chemical compositions; that is, the samples should differ only in the proportions of minerals present. This manual describes how to use the program, discusses the theory behind its operation, and presents test results of the program's accuracy. Required input for HandLens includes quantitative mineralogical data, obtained, for example, by RockJock analysis of X-ray diffraction (XRD) patterns, and quantitative chemical data, obtained, for example, by X-ray florescence (XRF) analysis of the same samples. Other quantitative data, such as sample depth, temperature, surface area, also can be entered. The minerals present in the samples are selected from a list, and the program is started. The results of the calculation include: (1) a table of linear coefficients of determination (r2's) which relate pairs of input data (for example, Si versus quartz weight percents); (2) a utility for plotting all input data, either as pairs of variables, or as sums of up to eight variables; (3) a table that presents the calculated chemical formulae for minerals in the samples; (4) a table that lists the calculated concentrations of major, minor, and trace elements in the various minerals; and (5) a table that presents chemical formulae for the minerals that have been corrected for possible systematic errors in the mineralogical and/or chemical analyses. In addition, the program contains a method for testing the assumption of constant chemistry of the minerals within a sample set.

  15. A list of tables summarizing various Cmap analysis, from which the final tables in the manuscript are based on

    EPA Pesticide Factsheets

    Various Cmap analyses within and across species and microarray platforms conducted and summarized to generate the tables in the publication.This dataset is associated with the following publication:Wang , R., A. Biales , N. Garcia-Reyero, E. Perkins, D. Villeneuve, G. Ankley, and D. Bencic. Fish Connectivity Mapping: Linking Chemical Stressors by Their MOA-Driven Transcriptomic Profiles. BMC Genomics. BioMed Central Ltd, London, UK, 17(84): 1-20, (2016).

  16. Chemical character of ground water in the shallow water-table aquifer at selected localities in the Memphis area, Tennessee

    USGS Publications Warehouse

    Parks, William Scott; Graham, D.D.; Lowery, J.F.

    1981-01-01

    Eight deep wells are being monitored in the Memphis, Tenn., area to detect any changes in the chemical character of water moving through the Memphis Sand towards major pumping centers. These wells are strategically located so as to intercept groundwater enroute through the Memphis Sand from the outcrop-recharge area. Although water quality analyses are available for many wells in the shallow water-table aquifer, no specific investigation has been made to characterize the quality of the water in this aquifer from which the Memphis Sand also receives part of its recharge. This investigation is to determine the chemical character of groundwater in the shallow water-table aquifer at selected localities in the Memphis area. Methods used to install eight shallow wells at abandoned dump sites containing chemical and/or industrial waste are described. Water samples from the eight shallow wells and two deep wells in the Memphis Sand were collected and analyzed. Results of the analysis are presented and the locations of the wells and dumps are shown on maps. (USGS)

  17. CRAFT (complete reduction to amplitude frequency table)--robust and time-efficient Bayesian approach for quantitative mixture analysis by NMR.

    PubMed

    Krishnamurthy, Krish

    2013-12-01

    The intrinsic quantitative nature of NMR is increasingly exploited in areas ranging from complex mixture analysis (as in metabolomics and reaction monitoring) to quality assurance/control. Complex NMR spectra are more common than not, and therefore, extraction of quantitative information generally involves significant prior knowledge and/or operator interaction to characterize resonances of interest. Moreover, in most NMR-based metabolomic experiments, the signals from metabolites are normally present as a mixture of overlapping resonances, making quantification difficult. Time-domain Bayesian approaches have been reported to be better than conventional frequency-domain analysis at identifying subtle changes in signal amplitude. We discuss an approach that exploits Bayesian analysis to achieve a complete reduction to amplitude frequency table (CRAFT) in an automated and time-efficient fashion - thus converting the time-domain FID to a frequency-amplitude table. CRAFT uses a two-step approach to FID analysis. First, the FID is digitally filtered and downsampled to several sub FIDs, and secondly, these sub FIDs are then modeled as sums of decaying sinusoids using the Bayesian approach. CRAFT tables can be used for further data mining of quantitative information using fingerprint chemical shifts of compounds of interest and/or statistical analysis of modulation of chemical quantity in a biological study (metabolomics) or process study (reaction monitoring) or quality assurance/control. The basic principles behind this approach as well as results to evaluate the effectiveness of this approach in mixture analysis are presented. Copyright © 2013 John Wiley & Sons, Ltd.

  18. A Cluster Analytic Study of Clinical Orientations among Chemical Dependency Counselors.

    ERIC Educational Resources Information Center

    Thombs, Dennis L.; Osborn, Cynthia J.

    2001-01-01

    Three distinct clinical orientations were identified in a sample of chemical dependency counselors (N=406). Based on cluster analysis, the largest group, identified and labeled as "uniform counselors," endorsed a simple, moral-disease model with little interest in psychosocial interventions. (Contains 50 references and 4 tables.) (GCP)

  19. Antioxidant capacity, fatty acids profile, and descriptive sensory analysis of table olives as affected by deficit irrigation.

    PubMed

    Cano-Lamadrid, Marina; Hernández, Francisca; Corell, Mireia; Burló, Francisco; Legua, Pilar; Moriana, Alfonso; Carbonell-Barrachina, Ángel A

    2017-01-01

    The influence of three irrigation treatments (T0, no stress; T1, soft stress; and, T2, moderate stress) on the key functional properties [fatty acids, sugar alcohols, organic acids, minerals, total polyphenols content (TPC), and antioxidant activity (AA)], sensory quality, and consumers' acceptance of table olives, cv. 'Manzanilla', was evaluated. A soft water stress, T1, led to table olives with the highest oil and dry matter contents, with the highest intensities of key sensory attributes and slightly, although not significant, higher values of consumer satisfaction degree. Besides, RDI in general (T1 and T2) slightly increased green colour, the content of linoleic acid, but decreased the content of phytic acid and some minerals. The soft RDI conditions are a good option for the cultivation of olive trees because they are environmentally friendly and simultaneously maintain or even improve the functionality, sensory quality, and consumer acceptance of table olives. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  20. 40 CFR Table 9 to Subpart Ffff of... - Soluble Hazardous Air Pollutants

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 9 Table 9 to Subpart FFFF of Part 63—Soluble Hazardous... and treatment requirements of this subpart FFFF are listed in the following table: Chemical name...

  1. Analysis of Coolant Options for Advanced Metal Cooled Nuclear Reactors

    DTIC Science & Technology

    2006-12-01

    24 Table 3.3 Hazards of Sodium Reaction Products, Hydride And Oxide...........................26 Table 3.4 Chemical Reactivity Of Selected...Liquid Metal Fast Breeder Reactor ORIGEN Oak Ridge Isotope Generator ORIGENARP Oak Ridge Isotope Generator Automated Rapid Processing PWR ...nuclear reactors, both because of the possibility of increased reactivity due to boiling and the potential loss of effectiveness of coolant heat transfer

  2. 37 CFR 1.58 - Chemical and mathematical formulae and tables.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., including the claims, may contain chemical and mathematical formulae, but shall not contain drawings or flow diagrams. The description portion of the specification may contain tables, but the same tables may only be...

  3. 37 CFR 1.58 - Chemical and mathematical formulae and tables.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., including the claims, may contain chemical and mathematical formulae, but shall not contain drawings or flow diagrams. The description portion of the specification may contain tables, but the same tables should not...

  4. 37 CFR 1.58 - Chemical and mathematical formulae and tables.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., including the claims, may contain chemical and mathematical formulae, but shall not contain drawings or flow diagrams. The description portion of the specification may contain tables, but the same tables may only be...

  5. Analysis and Operational Feasibility of Potable Water Production

    DTIC Science & Technology

    2015-09-01

    III. MODELING, SIMULATION, AND TEST RESULTS ANALYSIS ..............27 A. INTRODUCTION...Regions of Study ......................57 Table 10. Drinking Water Tests ...chemicals, and coliform bacteria. Testing of the condensed water is important to ensure potability, as common tests have been conducted to ensure

  6. Ion-selective electrodes in organic elemental and functional group analysis: a review

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Selig, W.

    1977-11-08

    The literature on the use of ion-selective electrodes in organic elemental and functional group analysis is surveyed in some detail. The survey is complete through Chemical Abstracts, Vol. 83 (1975). 40 figures, 52 tables, 236 references.

  7. Failure Analysis of the Main Rotor Retention Nut from AH-64 Helicopter

    DTIC Science & Technology

    1992-06-01

    corrosion , and electrochemical tests. The chemi- cal composition of the steel was well within the contractors specification and met the in- dustry standards...1. Additionally, the contractor specification meets the industry standards for the chemical composition for maraging C-250 grade steel . Table 1...metallographic analy- sis of both failed and intact nuts; chemical analysis of the 18 Ni maraging steel C-250 grade steel ; mechanical property, stress

  8. Calculating Toxic Corridors.

    DTIC Science & Technology

    1980-11-01

    59 programmable calculator . Method 1 will most likely be used if there is a toxic corridor length table for the chemical; Method 2 if there is no table...experience of the forecaster in making this forecast, availability of a toxic corridor length table for the released chemical, and availability of a TI

  9. 37 CFR 1.58 - Chemical and mathematical formulae and tables.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2012-07-01 2012-07-01 false Chemical and mathematical... Provisions The Application § 1.58 Chemical and mathematical formulae and tables. (a) The specification, including the claims, may contain chemical and mathematical formulae, but shall not contain drawings or flow...

  10. 40 CFR 161.190 - Physical and chemical characteristics.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Physical and chemical characteristics... Requirements § 161.190 Physical and chemical characteristics. (a) Table. Sections 161.100 through 161.102 describe how to use this table to determine the physical and chemical characteristics data requirements and...

  11. General RMP Guidance - Table of Contents

    EPA Pesticide Factsheets

    The Risk Management Programs for Chemical Accident Prevention (40 CFR Part 68) guidance is in chapters; each covering topics such as applicability of the rule, and requirements for reporting five-year accident history and offsite consequence analysis.

  12. Relationships between chemical structure and rat repellency. II. Compounds screened between 1950 and 1960

    USGS Publications Warehouse

    Bowles, W.A.; Adomaitis, V.A.; DeWitt, J.B.; Pratt, J.J.

    1974-01-01

    Over 4,600 compounds, chiefly organic types, were evaluated using both a food acceptance test (Part A) and a barrier penetration bioassay (Part B), to correlate relationships between chemical structure and rodent repellency.These chemicals are indexed and classified according to the functional groups present and to the degree of substitution within their molecular structures. The results of reduction in foot consumption for each compound appraised are calculated and their K values listed in Table I.The repellent activities of the functional groups represented, alone or in combinations, are expressed in Table II by a Functional Group Repellency Index. A ranking of these indices suggests that acyclic and heteroyclic compounds containing tri- or pentavalent nitrogen would be a parent compound of choice for synthesizing novel repellents. Other molecular arrangements, spatial configurations and combinations of functional groups are compared.There were 123 active, interesting or promising compounds included in the 699 having K values of 85 or greater, which were selected for the barrier appraisal study. These chemicals were formulated in selective solvents at several concentrations and applied to burlap. Small foot bags were fashioned using the fabric impregnated with the candidate formulation, and exposed to rodent attack following storage periods of varying intervals. The results of these tests are listed in Table III. Again, those compounds containing nitrogen in the functional groupings indicated a high order of effectiveness. Several commercial patents covering rodent repellents were issued using the data from the food acceptance and barrier studies.Organizations and cooperators which supplied samples for the program are listed in Appendix I. The Wiswesser cipher for compounds in Table I is used in Appendix II to facilitate location of chemicals by sample code number as they appear under the index headings, and for computer storage and analysis.

  13. Relationships between chemical structure and rat repellency: II. compounds screened between 1950 and 1960

    USGS Publications Warehouse

    Bowles, Walter A.; Adomaitis, V.A.; DeWitt, J.B.; Pratt, J.J.

    1974-01-01

    Over 4,600 compounds, chiefly organic types, were evaluated using both a food acceptance test (Part A) and a barrier penetration bioassay (Part B), to correlate relationships between chemical structure and rodent repellency. These chemicals are indexed and classified according to the functional groups present and to the degree of substitution within their molecular structures. The results of reduction in food consumption for each compound appraised are calculated and their K values listed in Table 1. The repellent activities of the functional groups represented, alone or in combinations, are expressed in Table II by a Functional Group Repellency Index.. A ranking of these indices suggests that acyclic and heteroyclic compounds containing tri- or pentavalent nitrogen would be a parent compound of choice for synthesizing novel repellents. Other molecular arrangements, spatial configurations and combinations of functional groups are compared. There were 123 active, interesting or promising compounds included in the 699 having K values of 85 or greater, which were selected for the barrier appraisal study. These chemicals were formulated in selective solvents at several concentrations and applied to burlap. Small food bags were fashioned using the fabric impregnated with the candidate formulation, and exposed to rodent attack following storage periods of varying intervals. The results of these tests are listed in Table III. Again, those compounds containing nitrogen in the functional groupings indicated a high order of effectiveness. Several commercial patents covering rodent repellents were issued using the data from the food acceptance and barrier studies. Organizations and cooperators which supplied samples for the program are listed in Appendix I. The Wiswesser cipher for compounds in Table I is used in Appendix II to facilitate location of chemicals by sample code number as they appear under the index headings, and for computer storage and analysis.

  14. Chemical Weapons Disposal: Improvements Needed in Program Accountability and Financial Management

    DTIC Science & Technology

    2000-05-01

    United States General Accounting Office PAQ Report to Congressional Committees May 2000 CHEMICAL WEAPONS DISPOSAL Improvements Needed in Program...warfare materiel, and former production facilities and identify and locate buried chemical warfare materiel. Alternative Technologies and Approaches...production facilities, and buried chemical warfare materiel. These items are described in table 1. Table 1: Nonstockpile Chemical Materiel Category

  15. 40 CFR 158.2120 - Microbial pesticides product analysis data requirements table.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Product Chemistry and Composition 885.1100 Product Identity R MP EP -- 885.1200 Manufacturing process R... Certification of limits R MP EP -- Physical and Chemical Characteristics 830.6302 Color R TGAI TGAI -- 830.6303...

  16. 40 CFR 158.2120 - Microbial pesticides product analysis data requirements table.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Product Chemistry and Composition 885.1100 Product Identity R MP EP -- 885.1200 Manufacturing process R... Certification of limits R MP EP -- Physical and Chemical Characteristics 830.6302 Color R TGAI TGAI -- 830.6303...

  17. 40 CFR Table 8 to Subpart Ffff of... - Partially Soluble Hazardous Air Pollutants

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 8 Table 8 to Subpart FFFF of Part 63—Partially Soluble...: Chemical name . . . CAS No. 1. 1,1,1-Trichloroethane (methyl chloroform) 71556 2. 1,1,2,2-Tetrachloroethane...

  18. Chemical Analyses of Pre-Holocene Rocks from Medicine Lake Volcano and Vicinity, Northern California

    USGS Publications Warehouse

    Donnelly-Nolan, Julie M.

    2008-01-01

    Chemical analyses are presented in an accompanying table (Table 1) for more than 600 pre-Holocene rocks collected at and near Medicine Lake Volcano, northern California. The data include major-element X-ray fluorescence (XRF) analyses for all of the rocks plus XRF trace element data for most samples, and instrumental neutron activation analysis (INAA) trace element data for many samples. In addition, a limited number of analyses of Na2O and K2O by flame photometry (FP) are included as well assome wet chemical analyses of FeO, H2O+/-, and CO2. Latitude and longitude location information is provided for all samples. This data set is intended to accompany the geologic map of Medicine Lake Volcano (Donnelly-Nolan, in press); map unit designations are given for each sample collected from the map area.

  19. 40 CFR 158.2171 - Experimental use permit microbial pesticides product analysis data requirements table.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... notes Product Chemistry and Composition 885.1100 Product identity R MP EP 885.1200 Manufacturing process....1500 Certification of limits R MP EP Physical and Chemical Characteristics 830.6302 Color R TGAI TGAI...

  20. 40 CFR 158.2120 - Microbial pesticides product analysis data requirements table.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Test substance MP EP Test notes Product Chemistry and Composition 885.1100 Product identity R MP EP 885... and EP 2 885.1500 Certification of limits R MP EP Physical and Chemical Characteristics 830.6302 Color...

  1. 40 CFR 158.2120 - Microbial pesticides product analysis data requirements table.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Test substance MP EP Test notes Product Chemistry and Composition 885.1100 Product identity R MP EP 885... and EP 2 885.1500 Certification of limits R MP EP Physical and Chemical Characteristics 830.6302 Color...

  2. 40 CFR 158.2171 - Experimental use permit microbial pesticides product analysis data requirements table.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... notes Product Chemistry and Composition 885.1100 Product identity R MP EP 885.1200 Manufacturing process....1500 Certification of limits R MP EP Physical and Chemical Characteristics 830.6302 Color R TGAI TGAI...

  3. 40 CFR Table 8 to Subpart Ffff of... - Partially Soluble Hazardous Air Pollutants

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CATEGORIES National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical... and treatment requirements in this subpart FFFF are listed in the following table: Chemical name...

  4. Element-ary Development.

    ERIC Educational Resources Information Center

    Schamp, Homer W., Jr.

    1989-01-01

    Describes the historic development of the periodic table from the four-element theory to the Lavoisier's table. Presents a table listing the old and new names of chemicals and the Lavoisier's table of elements. Lists two references. (YP)

  5. Assessment of the Treatability of Toxic Organics by Overland Flow,

    DTIC Science & Technology

    1983-01-01

    Tab’ I . Occunrence of organic chemsicals in household products . (After Hathaway 1980.1 Product Classter of organ iCs Product Classe of organirs...volatilization. the various classes of organics and their presence in Another important property of organic chemicals household products are given in Table 1...23 iv TABLES Table Page I. Occurrence of organic chemicals in household

  6. Isotope ratio mass spectrometry in combination with chemometrics for characterization of geographical origin and agronomic practices of table grape.

    PubMed

    Longobardi, Francesco; Casiello, Grazia; Centonze, Valentina; Catucci, Lucia; Agostiano, Angela

    2017-08-01

    Although table grape is one of the most cultivated and consumed fruits worldwide, no study has been reported on its geographical origin or agronomic practice based on stable isotope ratios. This study aimed to evaluate the usefulness of isotopic ratios (i.e. 2 H/ 1 H, 13 C/ 12 C, 15 N/ 14 N and 18 O/ 16 O) as possible markers to discriminate the agronomic practice (conventional versus organic farming) and provenance of table grape. In order to quantitatively evaluate which of the isotopic variables were more discriminating, a t test was carried out, in light of which only δ 13 C and δ 18 O provided statistically significant differences (P ≤ 0.05) for the discrimination of geographical origin and farming method. Principal component analysis (PCA) showed no good separation of samples differing in geographical area and agronomic practice; thus, for classification purposes, supervised approaches were carried out. In particular, general discriminant analysis (GDA) was used, resulting in prediction abilities of 75.0 and 92.2% for the discrimination of farming method and origin respectively. The present findings suggest that stable isotopes (i.e. δ 18 O, δ 2 H and δ 13 C) combined with chemometrics can be successfully applied to discriminate the provenance of table grape. However, the use of bulk nitrogen isotopes was not effective for farming method discrimination. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  7. Millimeter Wave Attenuation in Moist Air: Laboratory Measurements and Analysis.

    DTIC Science & Technology

    1984-03-01

    GHz (see Table 1). Artificial aerosol populations of known chemical composition and concentration can be added to study their growth/evaporation... engen in the quantitative deorip im of the inter- (0) Water ion activity ...... .28. 45 action betven, millimeter waves and moist air. The water...sizes. and chemical two states called the saturation point. At saturation, the rate composition. and moat Importantly. having the ability to

  8. 40 CFR 158.2171 - Experimental use permit microbial pesticides product analysis data requirements table.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... All Use Patterns Test Substance MP EP Test Notes Product Chemistry and Composition 885.1100 Product... R TGAI and MP TGAI and EP 2, 3 885.1500 Certification of limits R MP EP -- Physical and Chemical...

  9. 40 CFR 158.2171 - Experimental use permit microbial pesticides product analysis data requirements table.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... All Use Patterns Test Substance MP EP Test Notes Product Chemistry and Composition 885.1100 Product... R TGAI and MP TGAI and EP 2, 3 885.1500 Certification of limits R MP EP -- Physical and Chemical...

  10. Combining Chemistry and Music to Engage Student Interest: Using Songs to Accompany Selected Chemical Topics

    ERIC Educational Resources Information Center

    Last, Arthur M.

    2009-01-01

    The use of recorded music to add interest to a variety of lecture topics is described. Topics include the periodic table, the formation of ionic compounds, thermodynamics, carbohydrates, nuclear chemistry, and qualitative analysis. (Contains 1 note.)

  11. Measurement of kinaesthetic properties of in-brine table olives by microstructure of fracture surface, sensory evaluation and texture profile analysis (TPA).

    PubMed

    Lanza, Barbara; Amoruso, Filomena

    2018-02-02

    A series of transformations occur in olive fruit both during ripening and processing. In particular, significant changes in the microstructural composition affect the flavour, texture, nutrients and overall quality of the end product. Texture is one of the sensory quality attributes of greatest importance to consumer acceptance. In the present work, kinaesthetic properties of in-brine table olives of three cultivars of Olea europaea L. (Bella di Cerignola, Peranzana and Taggiasca cvs) were provided by several measurements of olive tissue texture by sensory, rheological and microstructural approaches. Olives at the same stage of ripening and processed with the same technology, but belonging to different cultivars, showed significant differences at microstructural, sensorial and rheological levels. To describe the relationship between the three variables, multiple regression analysis and principal component analysis were chosen. Differences in microstructure were closely related both in terms of hardness measured by texture profile analysis and hardness measured by sensory analysis. The information provided could be an aid for screening and training of a sensory panel. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

  12. IUPAC Periodic Table of the Isotopes

    USGS Publications Warehouse

    Holden, N.E.; Coplen, T.B.; Böhlke, J.K.; Wieser, M.E.; Singleton, G.; Walczyk, T.; Yoneda, S.; Mahaffy, P.G.; Tarbox, L.V.

    2011-01-01

    For almost 150 years, the Periodic Table of the Elements has served as a guide to the world of elements by highlighting similarities and differences in atomic structure and chemical properties. To introduce students, teachers, and society to the existence and importance of isotopes of the chemical elements, an IUPAC Periodic Table of the Isotopes (IPTI) has been prepared and can be found as a supplement to this issue.

  13. Approximate thermochemical tables for some C-H and C-H-O species

    NASA Technical Reports Server (NTRS)

    Bahn, G. S.

    1973-01-01

    Approximate thermochemical tables are presented for some C-H and C-H-O species and for some ionized species, supplementing the JANAF Thermochemical Tables for application to finite-chemical-kinetics calculations. The approximate tables were prepared by interpolation and extrapolation of limited available data, especially by interpolations over chemical families of species. Original estimations have been smoothed by use of a modification for the CDC-6600 computer of the Lewis Research Center PACl Program which was originally prepared for the IBM-7094 computer Summary graphs for various families show reasonably consistent curvefit values, anchored by properties of existing species in the JANAF tables.

  14. From Common Sense Concepts to Scientifically Conditioned Concepts of Chemical Bonding: An Historical and Textbook Approach Designed to Address Learning and Teaching Issues at the Secondary School Level

    NASA Astrophysics Data System (ADS)

    Croft, Michael; de Berg, Kevin

    2014-09-01

    This paper selects six key alternative conceptions identified in the literature on student understandings of chemical bonding and illustrates how a historical analysis and a textbook analysis can inform these conceptions and lead to recommendations for improving the teaching and learning of chemical bonding at the secondary school level. The historical analysis and the textbook analysis focus on the concepts of charge, octet, electron pair, ionic, covalent and metallic bonding. Finally, a table of recommendations is made for teacher and student in the light of four fundamental questions and the six alternative conceptions to enhance the quality of the curriculum resources available and the level of student engagement.

  15. 40 CFR Appendix to Subpart Cc of... - Tables

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 11 2013-07-01 2013-07-01 false Tables Appendix to Subpart CC of Part... to Subpart CC of Part 63—Tables Table 1—Hazardous Air Pollutants Chemical name CAS No.a Benzene 71432... salts, esters, or derivatives. Table 2—Leak Definitions for Pumps and Valves Standard a Phase Leak...

  16. 40 CFR Table 8 to Subpart Vvvvvv... - Emission Limits and Compliance Requirements for Heat Exchange Systems

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Requirements for Heat Exchange Systems 8 Table 8 to Subpart VVVVVV of Part 63 Protection of Environment... Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 8 Table 8 to Subpart VVVVVV....11499, you must comply with the requirements for heat exchange systems as shown in the following table...

  17. 40 CFR Table 8 to Subpart Vvvvvv... - Emission Limits and Compliance Requirements for Heat Exchange Systems

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Requirements for Heat Exchange Systems 8 Table 8 to Subpart VVVVVV of Part 63 Protection of Environment... Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 8 Table 8 to Subpart VVVVVV....11499, you must comply with the requirements for heat exchange systems as shown in the following table...

  18. 40 CFR Table 8 to Subpart Vvvvvv... - Emission Limits and Compliance Requirements for Heat Exchange Systems

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Requirements for Heat Exchange Systems 8 Table 8 to Subpart VVVVVV of Part 63 Protection of Environment... Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 8 Table 8 to Subpart VVVVVV....11499, you must comply with the requirements for heat exchange systems as shown in the following table...

  19. 40 CFR Table 8 to Subpart Vvvvvv... - Emission Limits and Compliance Requirements for Heat Exchange Systems

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Requirements for Heat Exchange Systems 8 Table 8 to Subpart VVVVVV of Part 63 Protection of Environment... Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 8 Table 8 to Subpart VVVVVV....11499, you must comply with the requirements for heat exchange systems as shown in the following table...

  20. 40 CFR Appendix to Subpart Cc of... - Tables

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 11 2012-07-01 2012-07-01 false Tables Appendix to Subpart CC of Part... to Subpart CC of Part 63—Tables Table 1—Hazardous Air Pollutants Chemical name CAS No.a Benzene 71432... salts, esters, or derivatives. Table 2—Leak Definitions for Pumps and Valves Standard a Phase Leak...

  1. 40 CFR Table 8 to Subpart Vvvvvv... - Emission Limits and Compliance Requirements for Heat Exchange Systems

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Requirements for Heat Exchange Systems 8 Table 8 to Subpart VVVVVV of Part 63 Protection of Environment... Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 8 Table 8 to Subpart VVVVVV....11499, you must comply with the requirements for heat exchange systems as shown in the following table...

  2. 40 CFR Appendix to Subpart Cc of... - Tables

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 11 2014-07-01 2014-07-01 false Tables Appendix to Subpart CC of Part... to Subpart CC of Part 63—Tables Table 1—Hazardous Air Pollutants Chemical name CAS No.a Benzene 71432... salts, esters, or derivatives. Table 2—Leak Definitions for Pumps and Valves Standard a Phase Leak...

  3. Local Anesthetic Microcapsules.

    DTIC Science & Technology

    1981-04-15

    III Chemical Structure of Local Anesthetics 12 Table IV Processing Summary of Lidocaine Microencapsulation 15 Table V Lidocaine Microcapsule Size...Distribution 17 Table VI Processing Summary of Etidocaine Microencapsulation 18 Table VII Etidocaine Microcapsule Size Distribution 19 Table VIII Lidocaine...REPORT I PERIOD COVERED Annual Local Anesthetic Microcapsules 1 July 1980-30 March 1981 6. PERFORMING ORG. REPORT NUMBER 2106-1 7. AUTHOR() S

  4. What People Eat--A Chemistry Program Based on Nutrition

    ERIC Educational Resources Information Center

    Raw, Isaias; And Others

    1975-01-01

    Describes a chemistry curriculum for college freshmen that uses laboratory study of the chemical composition of meals eaten by students as the central activity from which theoretical and practical learning are derived. Presents a meal analysis flow diagram and a table of concepts included in the program. (GS)

  5. Ecological periodic tables: Killer apps for translational ecology

    EPA Science Inventory

    The chemical periodic table, the Linnaean system of classification and the Hertzsprung-Russell diagram are information organizing structures that have transformed chemistry, biology and astronomy, respectively. Ecological periodic tables are information organizing structures wit...

  6. The Different Periodic Tables of Dmitrii Mendeleev

    ERIC Educational Resources Information Center

    Laing, Michael

    2008-01-01

    Between 1869 and 1905 the Russian chemist Dmitrii Mendeleev published several tables with different arrangements of the chemical elements. Four of these are compared with periodic tables by Russian scientists from 1934 and 1969. The difficulties caused by the lanthanoid elements are clearly seen in the table of 1905, which satisfactorily includes…

  7. Ecological periodic tables: in principle and practice - January 2013

    EPA Science Inventory

    The chemical periodic table, the Linnaean system of classification and the Hertzsprung-Russell diagram are iconic information organizing structures in chemistry, biology and astronomy, respectively. Ecological periodic tables are information organizing structures for ecology. T...

  8. 40 CFR Table 12 to Subpart Ffff of... - Applicability of General Provisions to Subpart FFFF

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 12 Table 12 to Subpart FFFF of Part 63—Applicability of...

  9. Atomic weights: no longer constants of nature

    USGS Publications Warehouse

    Coplen, Tyler B.; Holden, Norman E.

    2011-01-01

    Many of us were taught that the standard atomic weights we found in the back of our chemistry textbooks or on the Periodic Table of the Chemical Elements hanging on the wall of our chemistry classroom are constants of nature. This was common knowledge for more than a century and a half, but not anymore. The following text explains how advances in chemical instrumentation and isotopic analysis have changed the way we view atomic weights and why they are no longer constants of nature

  10. Statistical tables and charts showing geochemical variation in the Mesoproterozoic Big Creek, Apple Creek, and Gunsight formations, Lemhi group, Salmon River Mountains and Lemhi Range, central Idaho

    USGS Publications Warehouse

    Lindsey, David A.; Tysdal, Russell G.; Taggart, Joseph E.

    2002-01-01

    The principal purpose of this report is to provide a reference archive for results of a statistical analysis of geochemical data for metasedimentary rocks of Mesoproterozoic age of the Salmon River Mountains and Lemhi Range, central Idaho. Descriptions of geochemical data sets, statistical methods, rationale for interpretations, and references to the literature are provided. Three methods of analysis are used: R-mode factor analysis of major oxide and trace element data for identifying petrochemical processes, analysis of variance for effects of rock type and stratigraphic position on chemical composition, and major-oxide ratio plots for comparison with the chemical composition of common clastic sedimentary rocks.

  11. Primo Levi and the Periodic Table: Teaching Chemistry Using A Literary Text (Excerpt)

    ERIC Educational Resources Information Center

    Osorio, Viktoria Klara Lakatos; Tiedemann, Peter Wilhelm; Porto, Paulo Alves

    2007-01-01

    The excerpts from The Periodic Table book written by Primo Levi is discussed related to chemical concepts. The use of a literary text as a starting point of discussions of chemical concepts has allowed the integration of various topics covered in separate courses of the undergraduate program in chemistry.

  12. A History of Catechin Chemistry with Special Reference to Tea Leaves

    NASA Astrophysics Data System (ADS)

    Ryoyasu, Saijo; Katoh, Miyuki

    This review describes the history of the discovery of catechins, i.e., flavan 3-ols in the flavonoid compounds, with a special reference to tea leaves. 1. Catechin was first separated from gambier catechu and acacia catechu, and its molecular weight and chemical structure were proposed in 1902. By 1948 the six catechins,(+)-catechin,(-)-epicatechin,(-)-epicatechin 3-O-gallate,(-)-epigallocatechin,(+)-gallocatechin, and(-)-epigallocatechin 3-O-gallate, as shown in Table 1, had been found in a variety of plants, including tea. Table 1 summarizes each catechin, the plant associated with it, and the year and authorship of each first reporting.(-)-Epigallocatechin 3-gallate was isolated from tea leaves in 1948 as the last compound of the six catechins, even though it accounted for the largest proportion of total catechin content. The compound was not isolated and purified by traditional separation methods, such as the ethyl acetate extraction and lead acetate precipitation methods; instead, silica gel column chromatography was the key technique used to succeed in the separation and purification of the compound, from which the determination of the chemical structure followed. 2. The six catechins in fresh tea leaves are easily epimerized by heat treatment to form the corresponding epimerized catechins, as shown in Table 2. Observation indicates that the six natural and six epimerized catechins can be present in heat-treated dried tea leaves or green teas. 3. The chemical structures of the ten catechins, which include the compounds in Table 1, are shown in Table 3. As the contents of the catechins in fresh tea leaves have been reported many times in the literature, it is certain that these compounds are naturally present in tea leaves. 4. Table 4 summarizes the chemical structures of eight minor catechin derivatives found in tea leaves and oolong teas, the first reporting authors, and the year reported. Because the presence of these catechin derivatives in fresh tea leaves has not been strictly determined, it has not yet been made clear whether the compounds are naturally occurring ones. It is possible that some of these compounds might be artifacts. 5. Table 5 summarizes the chemical structures of eight afzelechin derivatives, the first reporting authors, and the year reported. 6. Table 6 summarizes the chemical structures of ten(+)-catechin derivatives, the first reporting authors, and the year reported.

  13. Crystal-Chemical Analysis of Soil at Rocknest, Gale Crater

    NASA Technical Reports Server (NTRS)

    Morrison, S. M.; Downs, R. T.; Blake, D. F.; Bish, D. L.; Ming, D. W.; Morris, R. V.; Yen, A. S.; Chipera, S. J.; Treiman, A. H.; Vaniman, D. T.; hide

    2013-01-01

    The CheMin instrument on the Mars Science Laboratory rover Curiosity performed X-ray diffraction analysis on Martian soil [1] at Rocknest in Gale Crater. In particular, crystalline phases from scoop 5 were identified and analyzed with the Rietveld method [2]. Refined unit-cell parameters are reported in Table 1. Comparing these unit-cell parameters with those in the literature provides an estimate of the chemical composition of the crystalline phases. For instance, Fig. 1 shows the Mg-content of Fa-Fo olivine as a function of the b unit-cell parameter using literature data. Our refined b parameter is indicated by the black triangle.

  14. Periodic Table of Elements: Los Alamos National Laboratory

    Science.gov Websites

    , Communication Specialist talks about the Periodic Table of Elements 7/17/17 Back to Elements List Seaborgium is Phone Periodic Table of Elements: LANL Chemistry Division » Periodic Table of Elements Chemistry the Elements Chemical Properties Elements List Periodic Table Download News LANL Biofuels Work

  15. 40 CFR Table 3 to Part 455 - Organic Pesticide Active Ingredient New Source Performance Standards (NSPS) and Pretreatment...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Organic Pesticide Active Ingredient New Source Performance Standards (NSPS) and Pretreatment Standards for New Sources (PSNS) 3 Table 3 to... STANDARDS (CONTINUED) PESTICIDE CHEMICALS Pt. 455, Table 3 Table 3 to Part 455—Organic Pesticide Active...

  16. 40 CFR Appendix to Subpart Cc of... - Tables

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Tables Appendix to Subpart CC of Part... to Subpart CC of Part 63—Tables Link to an amendment published at 75 FR 37731, June 30, 2010. Link to an amendment published at 75 FR 37731, June 30, 2010. Table 1—Hazardous Air Pollutants Chemical name...

  17. 40 CFR Table 2 to Subpart Jj of... - List of Volatile Hazardous Air Pollutants

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false List of Volatile Hazardous Air Pollutants 2 Table 2 to Subpart JJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY.... JJ, Table 2 Table 2 to Subpart JJ of Part 63—List of Volatile Hazardous Air Pollutants Chemical name...

  18. 40 CFR Table 3 to Subpart F of... - General Provisions Applicability to Subparts F, G, and H a to Subpart F

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 3 Table 3 to Subpart...

  19. 40 CFR Table 3 to Subpart F of... - General Provisions Applicability to Subparts F, G, and H a to Subpart F

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 3 Table 3 to Subpart...

  20. 40 CFR Table 3 to Subpart F of... - General Provisions Applicability to Subparts F, G, and H a to Subpart F

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 3 Table 3 to Subpart...

  1. Chemical Characterization of Simulated Boiling Water Reactor Coolant

    DTIC Science & Technology

    1990-05-01

    33 Table 3. 1: BCCL Sample Block Design Calculations ........................................... 45 Table 5.1: Gas Absorption...cover gas . The cool, degassed pure water is pumped through a regenerative heat exchanger and then through an electric feedwater heater. The feedwater is...POINTS DWCMRHEAT DOWNOMER---EXCHANGER CHEMICAL GAHP INJECTIOIN PUMP SYSTEM COIVER GAS IN-CLIRE SECTION CAGN TANK RECOMBINER! ______ DEMINERALIZER (Cic

  2. Summary of the Impact of Launch Vehicle Exhaust and Deorbiting Space and Meteorite Debris on Stratospheric Ozone

    DTIC Science & Technology

    1999-09-30

    20 3 MODELING OBSERVATIONS OF SRM EXHAUST................................................... 21 3.1...2. MAIN EXHAUST PRODUCTS ........................................................................................ 19 TABLE 3 -1 EXAMPLES OF...23 TABLE 3 -2. OZONE DEPLETING CHEMICALS FROM LAUNCH VEHICLES ......................................... 28 TABLE 3 - 3 . WORLDWIDE

  3. Ecological periodic tables for nekton and benthic macrofaunal community usage of estuarine habitats Slides

    EPA Science Inventory

    Ecological periodic tables for nekton and benthic macrofaunal community usage of estuarine habitats Steven P. Ferraro, U.S. Environmental Protection Agency, Newport, OR Background/Questions/Methods The chemical periodic table, the Linnaean system of classification, and the Her...

  4. Chemical Solitaire

    ERIC Educational Resources Information Center

    Philippof, Joanna; Seraphin, Kanesa Duncan; Seki, Jennifer; Kaupp, Lauren

    2015-01-01

    The periodic table does more than provide information about the elements. The periodic table also helps us make predictions about how the elements behave. Understanding the atomic structure of matter and periodic properties of the elements, as shown in the periodic table, is fundamental to many scientific disciplines. Unfortunately, high school…

  5. 40 CFR Table 3 to Part 455 - Organic Pesticide Active Ingredient New Source Performance Standards (NSPS) and Pretreatment...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Organic Pesticide Active Ingredient New Source Performance Standards (NSPS) and Pretreatment Standards for New Sources (PSNS) 3 Table 3 to... STANDARDS PESTICIDE CHEMICALS Pt. 455, Table 3 Table 3 to Part 455—Organic Pesticide Active Ingredient New...

  6. 40 CFR Table 3 to Part 455 - Organic Pesticide Active Ingredient New Source Performance Standards (NSPS) and Pretreatment...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Organic Pesticide Active Ingredient New Source Performance Standards (NSPS) and Pretreatment Standards for New Sources (PSNS) 3 Table 3 to... STANDARDS PESTICIDE CHEMICALS Pt. 455, Table 3 Table 3 to Part 455—Organic Pesticide Active Ingredient New...

  7. Periodic Table Target: A Game that Introduces the Biological Significance of Chemical Element Periodicity

    ERIC Educational Resources Information Center

    Sevcik, Richard S.; McGinty, Ragan L.; Schultz, Linda D.; Alexander, Susan V.

    2008-01-01

    Periodic Table Target, a game for middle school or high school students, familiarizes students with the form of the periodic table and the biological significance of different elements. The Periodic Table Target game board is constructed as a class project, and the game is played to reinforce the content. Students are assigned several elements…

  8. 40 CFR 158.2120 - Microbial pesticides product analysis data requirements table.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Certification of limits R MP EP -- Physical and Chemical Characteristics 830.6302 Color R TGAI TGAI -- 830.6303....6319 Miscibility R MP EP 2 830.6320 Corrosion Characteristics R MP EP 3 830.7000 pH R TGAI TGAI -- 830... pesticides are packaged in metal, plastic, or paper containers. 4. Only required for liquid forms of...

  9. Some pungent arguments against the physico-chemical theories of the origin of the genetic code and corroborating the coevolution theory.

    PubMed

    Di Giulio, Massimo

    2017-02-07

    Whereas it is extremely easy to prove that "if the biosynthetic relationships between amino acids were fundamental in the structuring of the genetic code, then their physico-chemical properties might also be revealed in the genetic code table"; it is, on the contrary, impossible to prove that "if the physico-chemical properties of amino acids were fundamental in the structuring of the genetic code, then the presence of the biosynthetic relationships between amino acids should not be revealed in the genetic code". And, given that in the genetic code table are mirrored both the biosynthetic relationships between amino acids and their physico-chemical properties, all this would be a test that would falsify the physico-chemical theories of the origin of the genetic code. That is to say, if the physico-chemical properties of amino acids had a fundamental role in organizing the genetic code, then we would not have duly revealed the presence - in the genetic code - of the biosynthetic relationships between amino acids, and on the contrary this has been observed. Therefore, this falsifies the physico-chemical theories of genetic code origin. Whereas, the coevolution theory of the origin of the genetic code would be corroborated by this analysis, because it would be able to give a description of evolution of the genetic code more coherent with the indisputable empirical observations that link both the biosynthetic relationships of amino acids and their physico-chemical properties to the evolutionary organization of the genetic code. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. 40 CFR Table Z-1 to Subpart Z of... - Default Chemical Composition of Phosphate Rock by Origin

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 22 2013-07-01 2013-07-01 false Default Chemical Composition of Phosphate Rock by Origin Z Table Z-1 to Subpart Z of Part 98 Protection of Environment ENVIRONMENTAL... Phosphate Rock by Origin Origin Total carbon(percent by weight) Central Florida 1.6 North Florida 1.76 North...

  11. 40 CFR Table Z-1 to Subpart Z of... - Default Chemical Composition of Phosphate Rock by Origin

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 22 2012-07-01 2012-07-01 false Default Chemical Composition of Phosphate Rock by Origin Z Table Z-1 to Subpart Z of Part 98 Protection of Environment ENVIRONMENTAL... Phosphate Rock by Origin Origin Total carbon(percent by weight) Central Florida 1.6 North Florida 1.76 North...

  12. 40 CFR Table Z-1 to Subpart Z of... - Default Chemical Composition of Phosphate Rock by Origin

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 21 2014-07-01 2014-07-01 false Default Chemical Composition of Phosphate Rock by Origin Z Table Z-1 to Subpart Z of Part 98 Protection of Environment ENVIRONMENTAL... Phosphate Rock by Origin Origin Total carbon(percent by weight) Central Florida 1.6 North Florida 1.76 North...

  13. 40 CFR Table Z-1 to Subpart Z of... - Default Chemical Composition of Phosphate Rock by Origin

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 21 2011-07-01 2011-07-01 false Default Chemical Composition of Phosphate Rock by Origin Z Table Z-1 to Subpart Z of Part 98 Protection of Environment ENVIRONMENTAL... Phosphate Rock by Origin Origin Total carbon(percent by weight) Central Florida 1.6 North Florida 1.76 North...

  14. Matching Element Symbols with State Abbreviations: A Fun Activity for Browsing the Periodic Table of Chemical Elements

    ERIC Educational Resources Information Center

    Woelk, Klaus

    2009-01-01

    A classroom activity is presented in which students are challenged to find matches between the United States two-letter postal abbreviations for states and chemical element symbols. The activity aims to lessen negative apprehensions students might have when the periodic table of the elements with its more than 100 combinations of letters is first…

  15. Periodic Table of the Elements in the Perspective of Artificial Neural Networks

    ERIC Educational Resources Information Center

    Lemes, Mauricio R.; Dal Pino, Arnaldo

    2011-01-01

    Although several chemical elements were not known by end of the 19th century, Mendeleev came up with an astonishing achievement, the periodic table of elements. He was not only able to predict the existence of (then) new elements, but also to provide accurate estimates of their chemical and physical properties. This is a profound example of the…

  16. 40 CFR Table 4 to Part 455 - BAT and NSPS Effluent Limitations for Priority Pollutants for Direct Discharge Point Sources That...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 31 2013-07-01 2013-07-01 false BAT and NSPS Effluent Limitations for Priority Pollutants for Direct Discharge Point Sources That use End-of-Pipe Biological Treatment 4 Table 4... AND STANDARDS (CONTINUED) PESTICIDE CHEMICALS Pt. 455, Table 4 Table 4 to Part 455—BAT and NSPS...

  17. Atomic Structure and Valence: Level II, Unit 10, Lesson 1; Chemical Bonding: Lesson 2; The Table of Elements: Lesson 3; Electrolysis: Lesson 4. Advanced General Education Program. A High School Self-Study Program.

    ERIC Educational Resources Information Center

    Manpower Administration (DOL), Washington, DC. Job Corps.

    This self-study program for high-school level contains lessons on: Atomic Structure and Valence, Chemical Bonding, The Table of Elements, and Electrolysis. Each of the lessons concludes with a Mastery Test to be completed by the student. (DB)

  18. PACSY, a relational database management system for protein structure and chemical shift analysis.

    PubMed

    Lee, Woonghee; Yu, Wookyung; Kim, Suhkmann; Chang, Iksoo; Lee, Weontae; Markley, John L

    2012-10-01

    PACSY (Protein structure And Chemical Shift NMR spectroscopY) is a relational database management system that integrates information from the Protein Data Bank, the Biological Magnetic Resonance Data Bank, and the Structural Classification of Proteins database. PACSY provides three-dimensional coordinates and chemical shifts of atoms along with derived information such as torsion angles, solvent accessible surface areas, and hydrophobicity scales. PACSY consists of six relational table types linked to one another for coherence by key identification numbers. Database queries are enabled by advanced search functions supported by an RDBMS server such as MySQL or PostgreSQL. PACSY enables users to search for combinations of information from different database sources in support of their research. Two software packages, PACSY Maker for database creation and PACSY Analyzer for database analysis, are available from http://pacsy.nmrfam.wisc.edu.

  19. Analysis of extractables from one euphorbia

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nemethy, E.K.; Otvos, J.W.; Calvin, M.

    1979-12-01

    Chemical analyses have been made of the heptane extractable material of Euphorbia lathyris, a plant which has been proposed as an energy farm candidate. The heptane extract is 4 to 5% of the dry plant weight and has a heat value of approx. 18 x 10/sup 3/ Btu/lb. This reduced photosynthetic material consists almost entirely of polycyclic triterpenoids. 2 figures, 4 tables.

  20. Analysis of chemical components from plant tissue samples

    NASA Technical Reports Server (NTRS)

    Laseter, J. L.

    1972-01-01

    Information is given on the type and concentration of sterols, free fatty acids, and total fatty acids in plant tissue samples. All samples were analyzed by gas chromatography and then by gas chromatography-mass spectrometry combination. In each case the mass spectral data was accumulated as a computer printout and plot. Typical gas chromatograms are included as well as tables describing test results.

  1. 40 CFR Table 8 to Subpart G of... - Organic HAP's Subject to the Wastewater Provisions for Process Units at New Sources

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Wastewater Provisions for Process Units at New Sources 8 Table 8 to Subpart G of Part 63 Protection of... Vessels, Transfer Operations, and Wastewater Pt. 63, Subpt. G, Table 8 Table 8 to Subpart G of Part 63—Organic HAP's Subject to the Wastewater Provisions for Process Units at New Sources Chemical name CAS No...

  2. 40 CFR Table 8 to Subpart G of... - Organic HAP's Subject to the Wastewater Provisions for Process Units at New Sources

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Wastewater Provisions for Process Units at New Sources 8 Table 8 to Subpart G of Part 63 Protection of... Vessels, Transfer Operations, and Wastewater Pt. 63, Subpt. G, Table 8 Table 8 to Subpart G of Part 63—Organic HAP's Subject to the Wastewater Provisions for Process Units at New Sources Chemical name CAS No...

  3. 40 CFR Table 8 to Subpart G of... - Organic HAP's Subject to the Wastewater Provisions for Process Units at New Sources

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Wastewater Provisions for Process Units at New Sources 8 Table 8 to Subpart G of Part 63 Protection of... Vessels, Transfer Operations, and Wastewater Pt. 63, Subpt. G, Table 8 Table 8 to Subpart G of Part 63—Organic HAP's Subject to the Wastewater Provisions for Process Units at New Sources Chemical name CAS No...

  4. Northern part, Ten Mile and Taunton River basins

    USGS Publications Warehouse

    Williams, John R.; Willey, Richard E.

    1967-01-01

    This report is one of two prepared by the Geological Survey for the Water Resources Commission. The principal purpose of this report is to make available the basic data on which the other, a map showing availability of ground water, is based. This basic-data report also can be used by engineers, planners, and others interested in or responsible for water-resources planning to determine the materials to be encountered (tables 3 and 4) and the yields which may be obtained from wells and test holes (tables 1 and 2) in the stratified sand and gravel that are the principal source of ground water and in bedrock. Partial and complete chemical analyses (tables 7 and 8) of these test holes and of some privately-owned wells provide information on the general quality of the water for domestic and other uses. A tabulation of existing municipal supplies, their capacity, production (table 5), and chemical quality of the water (table 6) may be used for regional planning purposes. Water-level measurements (figure 1) can be used to determine the annual fluctuations of the water table in certain types of materials. Seismic work (table 9) in the Canoe River valley, Norton, and test drilling with a power augur (tables 2 and 4) were done for the Geological Survey as  part of the investigation.

  5. 40 CFR Table 2 to Subpart F of... - Organic Hazardous Air Pollutants

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 2 Table 2 to Subpart F of Part 63—Organic Hazardous... 40 Protection of Environment 10 2013-07-01 2013-07-01 false Organic Hazardous Air Pollutants 2...

  6. 40 CFR Table 6 to Subpart Ffff of... - Requirements for Equipment Leaks

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 6 Table 6 to Subpart FFFF of Part 63—Requirements for... in organic HAP service a. Comply with the requirements of subpart UU of this part 63 and the...

  7. 40 CFR Table 2 to Subpart F of... - Organic Hazardous Air Pollutants

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 2 Table 2 to Subpart F of Part 63—Organic Hazardous... 40 Protection of Environment 9 2011-07-01 2011-07-01 false Organic Hazardous Air Pollutants 2...

  8. 40 CFR Table 2 to Subpart F of... - Organic Hazardous Air Pollutants

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 2 Table 2 to Subpart F of Part 63—Organic Hazardous... 40 Protection of Environment 10 2014-07-01 2014-07-01 false Organic Hazardous Air Pollutants 2...

  9. 40 CFR Table 6 to Subpart Jj of... - VHAP of Potential Concern

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Subpart JJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...) National Emission Standards for Wood Furniture Manufacturing Operations Pt. 63, Subpt. JJ, Table 6 Table 6 to Subpart JJ of Part 63—VHAP of Potential Concern CAS No. Chemical name EPA de minimis, tons/yr...

  10. 40 CFR Table 6 to Subpart Jj of... - VHAP of Potential Concern

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Subpart JJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...) National Emission Standards for Wood Furniture Manufacturing Operations Pt. 63, Subpt. JJ, Table 6 Table 6 to Subpart JJ of Part 63—VHAP of Potential Concern CAS No. Chemical name EPA de minimis, tons/yr...

  11. 40 CFR Table 6 to Subpart Jj of... - VHAP of Potential Concern

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Subpart JJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...) National Emission Standards for Wood Furniture Manufacturing Operations Pt. 63, Subpt. JJ, Table 6 Table 6 to Subpart JJ of Part 63—VHAP of Potential Concern CAS No. Chemical name EPA de minimis, tons/yr...

  12. Ultraviolet disinfection of potable water

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wolfe, R.L.

    Because of upcoming surface and groundwater regulations regarding the control of microbiological and chemical contaminants, there is a need to evaluate the feasibility and effectiveness of ultraviolet (UV) radiation for primary disinfection of potable water supplies. Data is presented on microbicidal wavelengths of UV and distribution of energy output for low and medium-pressure arc lamps. Both systems were found to perform equally well for inactivating microorganisms, but each had distinct advantages in different applications. Approximate dosages for 90% inactivation of selected microorganisms by UV is presented in a table. Cost analysis for disinfection is presented in two tables as wellmore » as the advantages and disadvantages of UV disinfection. 38 refs.« less

  13. Meeting Expanding Needs to Collect Food Intake Specificity: The Nutrition Data System for Research (NDS-R)

    NASA Technical Reports Server (NTRS)

    VanHeel, Nancy; Pettit, Janet; Rice, Barbara; Smith, Scott M.

    2003-01-01

    Food and nutrient databases are populated with data obtained from a variety of sources including USDA Reference Tables, scientific journals, food manufacturers and foreign food tables. The food and nutrient database maintained by the Nutrition Coordinating Center (NCC) at the University of Minnesota is continually updated with current nutrient data and continues to be expanded with additional nutrient fields to meet diverse research endeavors. Data are strictly evaluated for reliability and relevance before incorporation into the database; however, the values are obtained from various sources and food samples rather than from direct chemical analysis of specific foods. Precise nutrient values for specific foods are essential to the nutrition program at the National Aeronautics and Space Administration (NASA). Specific foods to be included in the menus of astronauts are chemically analyzed at the Johnson Space Center for selected nutrients. A request from NASA for a method to enter the chemically analyzed nutrient values for these space flight food items into the Nutrition Data System for Research (NDS-R) software resulted in modification of the database and interview system for use by NASA, with further modification to extend the method for related uses by more typical research studies.

  14. Common High Blood Pressure Myths

    MedlinePlus

    ... compounds are present. Myth: I use kosher or sea salt when I cook instead of regular table ... are low-sodium alternatives. Chemically, kosher salt and sea salt are the same as table salt — 40 ...

  15. Effects of Heat and Moisture Transfer Properties of Fabric on Heat Strain in Chemical Protective Ensembles

    DTIC Science & Technology

    2017-06-01

    11 Table 1 Notation for fabric and ensemble resistances . .......................................... 13 Thermal manikin...Table 1 Notation for fabric and ensemble resistances .................................................. 13 Table 2 Weight reduction of CB garment...samples were tested on a Sweating Guarded Hot Plate (SGHP) to measure fabric thermal and evaporative resistance , respectively. The ensembles were tested

  16. 40 CFR Table 2 to Subpart Ffff of... - Emission Limits and Work Practice Standards for Batch Process Vents

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Pollutants: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 2 Table 2 to Subpart FFFF... Group 1 batch process vents a. Reduce collective uncontrolled organic HAP emissions from the sum of all... a flare); or Not applicable. b. Reduce collective uncontrolled organic HAP emissions from the sum of...

  17. All ceramic table tops analyzed using swept source optical coherence tomography

    NASA Astrophysics Data System (ADS)

    Stoica, Eniko Tunde; Marcauteanu, Corina; Sinescu, Cosmin; Negrutiu, Meda Lavinia; Topala, Florin; Duma, Virgil Florin; Bradu, Adrian; Podoleanu, Adrian Gh.

    2016-03-01

    Erosion is the progressive loss of tooth substance by chemical processes that do not involve bacterial action. The affected teeth can be restored by using IPS e.max Press "table tops", which replace the occlusal surfaces. In this study we applied a fast in-house Swept Source Optical Coherence Tomography (SS OCT) system to analyze IPS e.max Press "table tops". 12 maxillary first premolars have been extracted and prepared for "table tops". These restorations were subjected to 3000 alternating cycles of thermo-cycling in a range from -10°C to +50°C mechanical occlusal loads of 200 N were also applied. Using SS OCT we analyze the marginal seal of these restorations, before and after applying the mechanical and thermal strain. The characteristics of the SS OCT system utilized are presented. Its depth resolution, measured in air is 10 μm. The system is able to acquire entire volumetric reconstructions in 2.5 s. From the dataset acquired high resolution en-face projections were also produced. Thus, the interfaces between all ceramic "table tops" and natural teeth were analyzed on the cross-sections (i.e., the B-scans) produced and also on the volumetric (tri-dimensional (3D)) reconstructions, several open interfaces being detected. The study therefore demonstrates the utility of SS OCT for the analysis of lithium disilicate glass ceramic "table tops".

  18. Dynamic factor analysis of groundwater quality trends in an agricultural area adjacent to Everglades National Park.

    PubMed

    Muñoz-Carpena, R; Ritter, A; Li, Y C

    2005-11-01

    The extensive eastern boundary of Everglades National Park (ENP) in south Florida (USA) is subject to one of the most expensive and ambitious environmental restoration projects in history. Understanding and predicting the water quality interactions between the shallow aquifer and surface water is a key component in meeting current environmental regulations and fine-tuning ENP wetland restoration while still maintaining flood protection for the adjacent developed areas. Dynamic factor analysis (DFA), a recent technique for the study of multivariate non-stationary time-series, was applied to study fluctuations in groundwater quality in the area. More than two years of hydrological and water quality time series (rainfall; water table depth; and soil, ground and surface water concentrations of N-NO3-, N-NH4+, P-PO4(3-), Total P, F-and Cl-) from a small agricultural watershed adjacent to the ENP were selected for the study. The unexplained variability required for determining the concentration of each chemical in the 16 wells was greatly reduced by including in the analysis some of the observed time series as explanatory variables (rainfall, water table depth, and soil and canal water chemical concentration). DFA results showed that groundwater concentration of three of the agrochemical species studied (N-NO3-, P-PO4(3-)and Total P) were affected by the same explanatory variables (water table depth, enriched topsoil, and occurrence of a leaching rainfall event, in order of decreasing relative importance). This indicates that leaching by rainfall is the main mechanism explaining concentration peaks in groundwater. In the case of N-NH4+, in addition to leaching, groundwater concentration is governed by lateral exchange with canals. F-and Cl- are mainly affected by periods of dilution by rainfall recharge, and by exchange with the canals. The unstructured nature of the common trends found suggests that these are related to the complex spatially and temporally varying land use patterns in the watershed. The results indicate that peak concentrations of agrochemicals in groundwater could be reduced by improving fertilization practices (by splitting and modifying timing of applications) and by operating the regional canal system to maintain the water table low, especially during the rainy periods.

  19. Dynamic factor analysis of groundwater quality trends in an agricultural area adjacent to Everglades National Park

    NASA Astrophysics Data System (ADS)

    Muñoz-Carpena, R.; Ritter, A.; Li, Y. C.

    2005-11-01

    The extensive eastern boundary of Everglades National Park (ENP) in south Florida (USA) is subject to one of the most expensive and ambitious environmental restoration projects in history. Understanding and predicting the water quality interactions between the shallow aquifer and surface water is a key component in meeting current environmental regulations and fine-tuning ENP wetland restoration while still maintaining flood protection for the adjacent developed areas. Dynamic factor analysis (DFA), a recent technique for the study of multivariate non-stationary time-series, was applied to study fluctuations in groundwater quality in the area. More than two years of hydrological and water quality time series (rainfall; water table depth; and soil, ground and surface water concentrations of N-NO 3-, N-NH 4+, P-PO 43-, Total P, F -and Cl -) from a small agricultural watershed adjacent to the ENP were selected for the study. The unexplained variability required for determining the concentration of each chemical in the 16 wells was greatly reduced by including in the analysis some of the observed time series as explanatory variables (rainfall, water table depth, and soil and canal water chemical concentration). DFA results showed that groundwater concentration of three of the agrochemical species studied (N-NO 3-, P-PO 43-and Total P) were affected by the same explanatory variables (water table depth, enriched topsoil, and occurrence of a leaching rainfall event, in order of decreasing relative importance). This indicates that leaching by rainfall is the main mechanism explaining concentration peaks in groundwater. In the case of N-NH 4+, in addition to leaching, groundwater concentration is governed by lateral exchange with canals. F -and Cl - are mainly affected by periods of dilution by rainfall recharge, and by exchange with the canals. The unstructured nature of the common trends found suggests that these are related to the complex spatially and temporally varying land use patterns in the watershed. The results indicate that peak concentrations of agrochemicals in groundwater could be reduced by improving fertilization practices (by splitting and modifying timing of applications) and by operating the regional canal system to maintain the water table low, especially during the rainy periods.

  20. Survey - Monomethylhydrazine Propellant/Material Compatibility

    DTIC Science & Technology

    1977-07-01

    MMH, UDMH . Crack growth susceptibility is related to contamination levels of water and carbon dioxide. VII. CONCLUSIONS Based upon the findings of the...per liter Density , grams per 0.870 to 9.874 milliliter at 25’C (770F) Table 2. Monomethylhydrazine Propellant Survey Requirements Constituent, Property...0 en ~ 14 Table 6. Summiary of Properties of 6 Monome-thylhydra7ine Propellant6 Chemical name: methyihydrazine Chemical formula : CH 3N2H 3 Formula

  1. PACSY, a relational database management system for protein structure and chemical shift analysis

    PubMed Central

    Lee, Woonghee; Yu, Wookyung; Kim, Suhkmann; Chang, Iksoo

    2012-01-01

    PACSY (Protein structure And Chemical Shift NMR spectroscopY) is a relational database management system that integrates information from the Protein Data Bank, the Biological Magnetic Resonance Data Bank, and the Structural Classification of Proteins database. PACSY provides three-dimensional coordinates and chemical shifts of atoms along with derived information such as torsion angles, solvent accessible surface areas, and hydrophobicity scales. PACSY consists of six relational table types linked to one another for coherence by key identification numbers. Database queries are enabled by advanced search functions supported by an RDBMS server such as MySQL or PostgreSQL. PACSY enables users to search for combinations of information from different database sources in support of their research. Two software packages, PACSY Maker for database creation and PACSY Analyzer for database analysis, are available from http://pacsy.nmrfam.wisc.edu. PMID:22903636

  2. Chemical lasers: a comprehensive literature survey.

    PubMed

    Arnold, S J; Rojeska, H

    1973-02-01

    A bibliography of chemical laser publications covering the period 1964 through 1971 has been compiled. The chronologically listed references are followed by tables showing the chemical systems exhibiting laser action and by an alphabetical author index.

  3. Chemical Lasers: A Comprehensive Literature Survey,

    DTIC Science & Technology

    A bibliography of chemical laser publications covering the period 1964 through 1971 has been compiled. The chronologically listed references are followed by tables showing the chemical systems exhibiting laser action and by an alphabetical author index . (Author)

  4. 40 CFR Table 3 to Part 455 - Organic Pesticide Active Ingredient New Source Performance Standards (NSPS) and Pretreatment...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Organic Pesticide Active Ingredient... STANDARDS (CONTINUED) PESTICIDE CHEMICALS Pt. 455, Table 3 Table 3 to Part 455—Organic Pesticide Active...) Pesticide kg/kkg (lb/1,000 lb) pounds of pollutant per 1000 lbs product Daily maximum shall not exceed...

  5. 40 CFR Table 3 to Part 455 - Organic Pesticide Active Ingredient New Source Performance Standards (NSPS) and Pretreatment...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Organic Pesticide Active Ingredient... STANDARDS (CONTINUED) PESTICIDE CHEMICALS Pt. 455, Table 3 Table 3 to Part 455—Organic Pesticide Active...) Pesticide kg/kkg (lb/1,000 lb) pounds of pollutant per 1000 lbs product Daily maximum shall not exceed...

  6. 40 CFR Table 2 to Subpart Ffff of... - Emission Limits and Work Practice Standards for Batch Process Vents

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 2 Table 2 to Subpart FFFF of Part 63... vents a. Reduce collective uncontrolled organic HAP emissions from the sum of all batch process vents... applicable. b. Reduce collective uncontrolled organic HAP emissions from the sum of all batch process vents...

  7. 40 CFR Table 4 to Subpart Ffff of... - Emission Limits for Storage Tanks

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 4 Table 4 to Subpart FFFF of Part 63—Emission Limits for.... Reduce total HAP emissions by ≥95 percent by weight or to ≤20 ppmv of TOC or organic HAP and ≤20 ppmv of...

  8. 40 CFR Table 2 to Subpart Ffff of... - Emission Limits and Work Practice Standards for Batch Process Vents

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 2 Table 2 to Subpart FFFF of Part 63... vents a. Reduce collective uncontrolled organic HAP emissions from the sum of all batch process vents... applicable. b. Reduce collective uncontrolled organic HAP emissions from the sum of all batch process vents...

  9. 40 CFR Appendix: Table 1 to... - List of Hazardous Air Pollutants (HAP) for Subpart HHH

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 11 2010-07-01 2010-07-01 true List of Hazardous Air Pollutants (HAP) for Subpart HHH Table Appendix: Table 1 to Subpart HHH of Part 63 Protection of Environment... HHH of Part 63—List of Hazardous Air Pollutants (HAP) for Subpart HHH CAS Number a Chemical name 75070...

  10. Use of JANAF Tables in Equilibrium Calculations and Partition Function Calculations for an Undergraduate Physical Chemistry Course

    ERIC Educational Resources Information Center

    Cleary, David A.

    2014-01-01

    The usefulness of the JANAF tables is demonstrated with specific equilibrium calculations. An emphasis is placed on the nature of standard chemical potential calculations. Also, the use of the JANAF tables for calculating partition functions is examined. In the partition function calculations, the importance of the zero of energy is highlighted.

  11. Ecological periodic tables: In principle and practice

    EPA Science Inventory

    The chemical periodic table, the Linnaean system of classification and the Hertzsprung-Russell diagram are iconic information organizing structure in chemistry, biology and astronomy, respectively, because they are simple, exceptionally useful and they foster the expansion of sci...

  12. A Framework for Evaluating Chemical Hazards.

    ERIC Educational Resources Information Center

    Coble, Charles R.; Hounshell, Paul B.

    1980-01-01

    Lists questions that teachers should ask relating to use of all chemicals in the school laboratory, as well as chemicals with known and suspected dangerous properties. Tables list Occupational Safety and Health Administration (OSHA)-defined carcinogens, American Chemical Society-defined teratogens, suspected carcinogens, and other hazardous…

  13. Ecological periodic tables: In principle and practice - Janury 2012

    EPA Science Inventory

    The chemical periodic table, the Linnaean system of classification and the Hertzsprung-Russell diagram are iconic information organizing structures in chemistry, biology and astronomy, respectively, because they are simple, exceptionally useful and they foster the expansion of sc...

  14. GC-MS olfactometric and LC-DAD-ESI-MS/MS characterization of key odorants and phenolic compounds in black dry-salted olives.

    PubMed

    Selli, Serkan; Kelebek, Hasim; Kesen, Songul; Sonmezdag, Ahmet Salih

    2018-02-01

    Olives are processed in different ways depending on consumption habits, which vary between countries. Different de-bittering methods affect the aroma and aroma-active compounds of table olives. This study focused on analyzing the aroma and aroma-active compounds of black dry-salted olives using gas chromatography-mass spectrometry-olfactometry (GC-MS-O) techniques. Thirty-nine volatile compounds which they have a total concentration of 29 459 µg kg -1 , were determined. Aroma extract dilution analysis (AEDA) was used to determine key aroma compounds of table olives. Based on the flavor dilution (FD) factor, the most powerful aroma-active compounds in the sample were methyl-2-methyl butyrate (tropical, sweet; FD: 512) and (Z)-3-hexenol (green, flowery; FD: 256). Phenolic compounds in table olives were also analyzed by LC-DAD-ESI-MS/MS. A total of 20 main phenolic compounds were identified and the highest content of phenolic compound was luteolin-7-glucoside (306 mg kg -1 ), followed by verbascoside (271 mg kg -1 ), oleuropein (231 mg kg -1 ), and hydroxytyrosol (3,4-DHPEA) (221 mg kg -1 ). Alcohols, carboxylic acids, and lactones were qualitatively and quantitatively the dominant volatiles in black dry-salted olives. Results indicated that esters and alcohols were the major aroma-active compounds. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

  15. Generation rates and chemical compositions of waste streams in a typical crewed space habitat

    NASA Technical Reports Server (NTRS)

    Wydeven, Theodore; Golub, Morton A.

    1990-01-01

    A judicious compilation of generation rates and chemical compositions of potential waste feed streams in a typical crewed space habitat was made in connection with the waste-management aspect of NASA's Physical/Chemical Closed-Loop Life Support Program. Waste composition definitions are needed for the design of waste-processing technologies involved in closing major life support functions in future long-duration human space missions. Tables of data for the constituents and chemical formulas of the following waste streams are presented and discussed: human urine, feces, hygiene (laundry and shower) water, cleansing agents, trash, humidity condensate, dried sweat, and trace contaminants. Tables of data on dust generation and pH values of the different waste streams are also presented and discussed.

  16. 40 CFR Table 1 to Subpart Ffff of... - Emission Limits and Work Practice Standards for Continuous Process Vents

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 1 Table 1 to Subpart FFFF of Part 63... vent a. Not applicable i. Reduce emissions of total organic HAP by ≥98 percent by weight or to an outlet process concentration ≤20 ppmv as organic HAP or TOC by venting emissions through a closed-vent...

  17. 40 CFR Table 5 to Subpart Ffff of... - Emission Limits and Work Practice Standards for Transfer Racks

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 5 Table 5 to Subpart FFFF of Part 63—Emission... each . . . You must . . . 1. Group 1 transfer rack a. Reduce emissions of total organic HAP by ≥98 percent by weight or to an outlet concentration ≤20 ppmv as organic HAP or TOC by venting emissions...

  18. 40 CFR Table 1 to Subpart Ffff of... - Emission Limits and Work Practice Standards for Continuous Process Vents

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Pollutants: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 1 Table 1 to Subpart FFFF... continuous process vent a. Not applicable i. Reduce emissions of total organic HAP by ≥98 percent by weight or to an outlet process concentration ≤20 ppmv as organic HAP or TOC by venting emissions through a...

  19. 40 CFR Table 1 to Subpart Ffff of... - Emission Limits and Work Practice Standards for Continuous Process Vents

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 1 Table 1 to Subpart FFFF of Part 63... vent a. Not applicable i. Reduce emissions of total organic HAP by ≥98 percent by weight or to an outlet process concentration ≤20 ppmv as organic HAP or TOC by venting emissions through a closed-vent...

  20. Analysis of street sweepings, Portland, Oregon

    USGS Publications Warehouse

    Miller, Timothy L.; Rinella, Joseph F.; McKenzie, Stuart W.; Parmenter, Jerry

    1977-01-01

    A brief study involving collection and analysis of street sweepings was undertaken to provide the U.S. Army Corps of Engineers with data on physical, chemical, and biological characteristics of dust and dirt accumulating on Portland streets. Most of the analyses selected were based on the pollutant loads predicted by the Storage, Treatment, Overflow, and Runoff Model (STORM). Five different basins were selected for sampling, and samples were collected three times in each basin. Because the literature reports no methodology for analysis of dust and dirt, the analytical methodology is described in detail. Results of the analyses are summarized in table 1.

  1. 46 CFR 153.933 - Chemical protective clothing.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Chemical protective clothing. 153.933 Section 153.933... § 153.933 Chemical protective clothing. When table 1 refers to this section, the following apply: (a) The master shall ensure that the following chemical protective clothing constructed of materials...

  2. 46 CFR 153.933 - Chemical protective clothing.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Chemical protective clothing. 153.933 Section 153.933... § 153.933 Chemical protective clothing. When table 1 refers to this section, the following apply: (a) The master shall ensure that the following chemical protective clothing constructed of materials...

  3. 46 CFR 153.933 - Chemical protective clothing.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Chemical protective clothing. 153.933 Section 153.933... § 153.933 Chemical protective clothing. When table 1 refers to this section, the following apply: (a) The master shall ensure that the following chemical protective clothing constructed of materials...

  4. 46 CFR 153.933 - Chemical protective clothing.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Chemical protective clothing. 153.933 Section 153.933... § 153.933 Chemical protective clothing. When table 1 refers to this section, the following apply: (a) The master shall ensure that the following chemical protective clothing constructed of materials...

  5. 46 CFR 153.933 - Chemical protective clothing.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Chemical protective clothing. 153.933 Section 153.933... § 153.933 Chemical protective clothing. When table 1 refers to this section, the following apply: (a) The master shall ensure that the following chemical protective clothing constructed of materials...

  6. Modelling alkali metal emissions in large-eddy simulation of a preheated pulverised-coal turbulent jet flame using tabulated chemistry

    NASA Astrophysics Data System (ADS)

    Wan, Kaidi; Xia, Jun; Vervisch, Luc; Liu, Yingzu; Wang, Zhihua; Cen, Kefa

    2018-03-01

    The numerical modelling of alkali metal reacting dynamics in turbulent pulverised-coal combustion is discussed using tabulated sodium chemistry in large eddy simulation (LES). A lookup table is constructed from a detailed sodium chemistry mechanism including five sodium species, i.e. Na, NaO, NaO2, NaOH and Na2O2H2, and 24 elementary reactions. This sodium chemistry table contains four coordinates, i.e. the equivalence ratio, the mass fraction of the sodium element, the gas-phase temperature, and a progress variable. The table is first validated against the detailed sodium chemistry mechanism by zero-dimensional simulations. Then, LES of a turbulent pulverised-coal jet flame is performed and major coal-flame parameters compared against experiments. The chemical percolation devolatilisation (CPD) model and the partially stirred reactor (PaSR) model are employed to predict coal pyrolysis and gas-phase combustion, respectively. The response of the five sodium species in the pulverised-coal jet flame is subsequently examined. Finally, a systematic global sensitivity analysis of the sodium lookup table is performed and the accuracy of the proposed tabulated sodium chemistry approach has been calibrated.

  7. Space processing applications payload equipment study. Volume 2A: Experiment requirements

    NASA Technical Reports Server (NTRS)

    Smith, A. G.; Anderson, W. T., Jr.

    1974-01-01

    An analysis of the space processing applications payload equipment was conducted. The primary objective was to perform a review and an update of the space processing activity research equipment requirements and specifications that were derived in the first study. The analysis is based on the six major experimental classes of: (1) biological applications, (2) chemical processes in fluids, (3) crystal growth, (4) glass technology, (5) metallurgical processes, and (6) physical processes in fluids. Tables of data are prepared to show the functional requirements for the areas of investigation.

  8. Physico-chemical characterization of natural fermentation process of Conservolea and Kalamàta table olives and developement of a protocol for the pre-selection of fermentation starters.

    PubMed

    Bleve, Gianluca; Tufariello, Maria; Durante, Miriana; Grieco, Francesco; Ramires, Francesca Anna; Mita, Giovanni; Tasioula-Margari, Maria; Logrieco, Antonio Francesco

    2015-04-01

    Table olives are one of the most important traditional fermented vegetables in Europe and their world consumption is constantly increasing. Conservolea and Kalamàta are the most important table olives Greek varieties. In the Greek system, the final product is obtained by spontaneous fermentations, without any chemical debittering treatment. This natural fermentation process is not predictable and strongly influenced by the physical-chemical conditions and by the presence of microorganisms contaminating the olives. Natural fermentations of Conservolea and Kalamàta cultivars black olives were studied in order to determine microbiological, biochemical and chemical evolution during the process. Following the process conditions generally used by producers, in both cultivars, yeasts were detected throughout the fermentation, whereas lactic acid bacteria (LAB) appeared in the last staged of the process. A new optimized specific protocol was developed to select autochthonous yeast and LAB isolates that can be good candidates as starters. These microorganisms were pre-selected for their ability to adapt to model brines, to have beta-glucosidase activity, not to produce biogenic amines. Chemical compounds deriving by microbiological activities and associated to the three different phases (30, 90 and 180 days) of the fermentation process were identified and were proposed as chemical descriptors to follow the fermentation progress. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. STREAM Table Program: User's manual and program document

    NASA Technical Reports Server (NTRS)

    Hiles, K. H.

    1981-01-01

    This program was designed to be an editor for the Lewis Chemical Equilibrium program input files and is used for storage, manipulation and retrieval of the large amount of data required. The files are based on the facility name, case number, and table number. The data is easily recalled by supplying the sheet number to be displayed. The retrieval basis is a sheet defined to be all of the individual flow streams which comprise a given portion of a coal gasification system. A sheet may cover more than one page of output tables. The program allows for the insertion of a new table, revision of existing tables, deletion of existing tables, or the printing of selected tables. No calculations are performed. Only pointers are used to keep track of the data.

  10. Summaries of FY 1982 research in the chemical sciences

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    1982-09-01

    The purpose of this booklet is to help those interested in research supported by the Department of Energy's Division of Chemical Sciences, which is one of six Divisions of the Office of Basic Energy Sciences in the Office of Energy Research. These summaries are intended to provide a rapid means for becoming acquainted with the Chemical Sciences program to members of the scientific and technological public and interested persons in the Legislative and Executive Branches of the Government. Areas of research supported by the Division are to be seen in the section headings, the index and the summaries themselves. Energymore » technologies which may be advanced by use of the basic knowledge discovered in this program can be seen in the index and again (by reference) in the summaries. The table of contents lists the following: photochemical and radiation sciences; chemical physics; atomic physics; chemical energy; separation and analysis; chemical engineering sciences; offsite contracts; equipment funds; special facilities; topical index; institutional index for offsite contracts; investigator index.« less

  11. Modelling the effect of ascorbic acid, sodium metabisulphite and sodium chloride on the kinetic responses of lactic acid bacteria and yeasts in table olive storage using a specifically implemented Quasi-chemical primary model.

    PubMed

    Echevarria, R; Bautista-Gallego, J; Arroyo-López, F N; Garrido-Fernández, A

    2010-04-15

    The goal of this work was to apply the Quasi-chemical primary model (a system of four ordinary differential equations that derives from a hypothetical four-step chemical mechanism involving an antagonistic metabolite) in the study of the evolution of yeast and lactic acid bacteria populations during the storage of Manzanilla-Aloreña table olives subjected to different mixtures of ascorbic acid, sodium metabisulphite and NaCl. Firstly, the Quasi-chemical model was applied to microbial count data to estimate the growth-decay biological parameters. The model accurately described the evolution of both populations during storage, providing detailed information on the microbial behaviour. Secondly, these parameters were used as responses and analysed according to a mixture design experiment (secondary model). The contour lines of the corresponding response surfaces clearly disclosed the relationships between growth and environmental conditions, showing the stimulating and inhibitory effect of ascorbic acid and sodium metabisulphite, respectively, on both populations of microorganisms. This work opens new possibilities for the potential use of the Quasi-chemical primary model in the study of table olive fermentations. (c) 2010 Elsevier B.V. All rights reserved.

  12. Ecological periodic tables for nekton and benthic macrofaunal community usage of estuarine habitats

    EPA Science Inventory

    Background/Questions/Methods The chemical periodic table, the Linnaean system of classification, and the Hertzsprung-Russell diagram are iconic information organizing systems because they are simple, easy to understand, exceptionally useful, and they foster the expansion of sc...

  13. 40 CFR Table 8 to Subpart G of... - Organic HAP's Subject to the Wastewater Provisions for Process Units at New Sources

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Organic HAP's Subject to the Wastewater... Operations, and Wastewater Pt. 63, Subpt. G, Table 8 Table 8 to Subpart G of Part 63—Organic HAP's Subject to the Wastewater Provisions for Process Units at New Sources Chemical name CAS No. a Allyl chloride...

  14. 40 CFR Table 8 to Subpart G of... - Organic HAP's Subject to the Wastewater Provisions for Process Units at New Sources

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 9 2011-07-01 2011-07-01 false Organic HAP's Subject to the Wastewater... Operations, and Wastewater Pt. 63, Subpt. G, Table 8 Table 8 to Subpart G of Part 63—Organic HAP's Subject to the Wastewater Provisions for Process Units at New Sources Chemical name CAS No. a Allyl chloride...

  15. The Periodic Table. Physical Science in Action[TM]. Schlessinger Science Library. [Videotape].

    ERIC Educational Resources Information Center

    2000

    Kids know that when they are lost, they look at a map to find their way. It's no different in the world of science, as they'll learn in The Periodic Table--a fun and engaging look at the road map of the elements. Young students will learn about key information included on the table, including atomic number, atomic mass and chemical symbol. They'll…

  16. VizieR Online Data Catalog: Stellar yields and the initial mass function (Molla+, 2015)

    NASA Astrophysics Data System (ADS)

    Molla, M.; Cavichia, O.; Gavilan, M.; Gibson, B. K.

    2017-10-01

    These tables give the theoretical chemical evolution models applied for the Milky Way Galaxy (MWG) from the cited paper. Basically give tables 2, 4 of stellar yields used and results of table 6 for the 144 models computed that work. Tables 2 and 4 give the stellar yields q_i(m) and remmnant mass for low and intermediate stars and massive stars, respectively, in a similar format for all authors. Table 6 gives the value of Chi2 for the 144 models computed for MWG using those stellar yields and different Initial Mass Function (see paper). Moreover, we give the table with results of the present time state of the Galactic disk for these 144 models. (12 data files).

  17. Probabilistic modelling of human exposure to intense sweeteners in Italian teenagers: validation and sensitivity analysis of a probabilistic model including indicators of market share and brand loyalty.

    PubMed

    Arcella, D; Soggiu, M E; Leclercq, C

    2003-10-01

    For the assessment of exposure to food-borne chemicals, the most commonly used methods in the European Union follow a deterministic approach based on conservative assumptions. Over the past few years, to get a more realistic view of exposure to food chemicals, risk managers are getting more interested in the probabilistic approach. Within the EU-funded 'Monte Carlo' project, a stochastic model of exposure to chemical substances from the diet and a computer software program were developed. The aim of this paper was to validate the model with respect to the intake of saccharin from table-top sweeteners and cyclamate from soft drinks by Italian teenagers with the use of the software and to evaluate the impact of the inclusion/exclusion of indicators on market share and brand loyalty through a sensitivity analysis. Data on food consumption and the concentration of sweeteners were collected. A food frequency questionnaire aimed at identifying females who were high consumers of sugar-free soft drinks and/or of table top sweeteners was filled in by 3982 teenagers living in the District of Rome. Moreover, 362 subjects participated in a detailed food survey by recording, at brand level, all foods and beverages ingested over 12 days. Producers were asked to provide the intense sweeteners' concentration of sugar-free products. Results showed that consumer behaviour with respect to brands has an impact on exposure assessments. Only probabilistic models that took into account indicators of market share and brand loyalty met the validation criteria.

  18. Sparse Partial Equilibrium Tables in Chemically Resolved Reactive Flow

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vitello, P; Fried, L E; Pudliner, B

    2003-07-14

    The detonation of an energetic material is the result of a complex interaction between kinetic chemical reactions and hydrodynamics. Unfortunately, little is known concerning the detailed chemical kinetics of detonations in energetic materials. CHEETAH uses rate laws to treat species with the slowest chemical reactions, while assuming other chemical species are in equilibrium. CHEETAH supports a wide range of elements and condensed detonation products and can also be applied to gas detonations. A sparse hash table of equation of state values, called the ''cache'' is used in CHEETAH to enhance the efficiency of kinetic reaction calculations. For large-scale parallel hydrodynamicmore » calculations, CHEETAH uses MPI communication to updates to the cache. We present here details of the sparse caching model used in the CHEETAH. To demonstrate the efficiency of modeling using a sparse cache model we consider detonations in energetic materials.« less

  19. Sparse Partial Equilibrium Tables in Chemically Resolved Reactive Flow

    NASA Astrophysics Data System (ADS)

    Vitello, Peter; Fried, Laurence E.; Pudliner, Brian; McAbee, Tom

    2004-07-01

    The detonation of an energetic material is the result of a complex interaction between kinetic chemical reactions and hydrodynamics. Unfortunately, little is known concerning the detailed chemical kinetics of detonations in energetic materials. CHEETAH uses rate laws to treat species with the slowest chemical reactions, while assuming other chemical species are in equilibrium. CHEETAH supports a wide range of elements and condensed detonation products and can also be applied to gas detonations. A sparse hash table of equation of state values is used in CHEETAH to enhance the efficiency of kinetic reaction calculations. For large-scale parallel hydrodynamic calculations, CHEETAH uses parallel communication to updates to the cache. We present here details of the sparse caching model used in the CHEETAH coupled to an ALE hydrocode. To demonstrate the efficiency of modeling using a sparse cache model we consider detonations in energetic materials.

  20. Chemistry of superheavy elements.

    PubMed

    Schädel, Matthias

    2006-01-09

    The number of chemical elements has increased considerably in the last few decades. Most excitingly, these heaviest, man-made elements at the far-end of the Periodic Table are located in the area of the long-awaited superheavy elements. While physical techniques currently play a leading role in these discoveries, the chemistry of superheavy elements is now beginning to be developed. Advanced and very sensitive techniques allow the chemical properties of these elusive elements to be probed. Often, less than ten short-lived atoms, chemically separated one-atom-at-a-time, provide crucial information on basic chemical properties. These results place the architecture of the far-end of the Periodic Table on the test bench and probe the increasingly strong relativistic effects that influence the chemical properties there. This review is focused mainly on the experimental work on superheavy element chemistry. It contains a short contribution on relativistic theory, and some important historical and nuclear aspects.

  1. 40 CFR 455.47 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS PESTICIDE CHEMICALS Pesticide Chemicals Formulating and Packaging... Best Engineering Judgement for modifications not listed in Table 8 to this part 455); (2) The...

  2. 40 CFR 455.47 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS PESTICIDE CHEMICALS Pesticide Chemicals Formulating and Packaging... Best Engineering Judgement for modifications not listed in Table 8 to this part 455); (2) The...

  3. Ecological periodic tables for estuarine habitats

    EPA Science Inventory

    Southwood (1977; J Anim Ecol 46: 337-365) compared the situation in ecology to that in chemistry before the development of the periodic table when each fact, for example, the solubility or reactivity of a chemical element, had to be discovered independently and remembered in isol...

  4. Postharvest evaluation of soilless-grown table grape during storage in modified atmosphere.

    PubMed

    Cefola, Maria; Pace, Bernardo; Buttaro, Donato; Santamaria, Pietro; Serio, Francesco

    2011-09-01

    Soilless growth systems, developed mainly for vegetables and ornamental crops, have also been used recently as an alternative to soil culture for table grape in order to achieve optimal production performance. In this study, sensory, physical and chemical parameters were analysed in table grapes obtained from soil and soilless growth systems at harvest and during storage in air or modified atmosphere. At harvest, soilless-grown berries were 30% firmer than those grown in soil. Moreover, they showed 60% higher antioxidant activity and total phenol content than soil-grown fruits. Modified atmosphere storage resulted in a better quality of table grapes compared with those stored in air. Furthermore, soilless growth was more suitable than soil growth for preserving visual quality and controlling rachis browning and weight loss. Since the soilless system produces berries that are cleaner and of higher quality than those grown in soil, the implementation of soilless growth for the production of health-promoting and convenience fruits is suggested. Copyright © 2011 Society of Chemical Industry.

  5. Waste streams in a crewed space habitat

    NASA Technical Reports Server (NTRS)

    Wydeven, T.; Golub, M. A.

    1991-01-01

    A judicious compilation of generation rates and chemical compositions of potential waste feed streams in a typical crewed space habitat was made in connection with the waste-management aspect of NASA's Physical/Chemical Closed-Loop Life Support Program. Waste composition definitions are needed for the design of waste-processing technologies involved in closing major life support functions in future long-duration human space missions. Tables of data for the constituents and chemical formulas of the following waste streams are presented and discussed: human urine, feces, hygiene (laundry and shower) water, cleansing agents, trash, humidity condensate, dried sweat, and trace contaminants. Tables of data on dust generation and pH values of the different waste streams are also presented and discussed.

  6. Online Periodic Table: A Cautionary Note

    NASA Astrophysics Data System (ADS)

    Izci, Kemal; Barrow, Lloyd H.; Thornhill, Erica

    2013-08-01

    The purpose of this study was (a) to evaluate ten online periodic table sources for their accuracy and (b) to compare the types of information and links provided to users. Limited studies have been reported on online periodic table (Diener and Moore 2011; Slocum and Moore in J Chem Educ 86(10):1167, 2009). Chemistry students' understanding of periodic table is vital for their success in chemistry, and the online periodic table has the potential to advance learners' understanding of chemical elements and fundamental chemistry concepts (Brito et al. in J Res Sci Teach 42(1):84-111, 2005). The ten sites were compared for accuracy of data with the Handbook of Chemistry and Physics (HCP, Haynes in CRC handbook of chemistry and physics: a ready-reference book of chemical and physical data. CRC Press, Boca Raton 2012). The 10 sites are the most visited periodic table Web sites available. Four different elements, carbon, gold, argon, and plutonium, were selected for comparison, and 11 different attributes for each element were identified for evaluating accuracy. A wide variation of accuracy was found among the 10 periodic table sources. Chemicool was the most accurate information provider with 66.67 % accuracy when compared to the HCP. The 22 types of information including meaning of name and use in industry and society provided by these sites were, also, compared. WebElements, "Chemicool", "Periodic Table Live", and "the Photographic Periodic Table of the Elements" were the most information providers, providing 86.36 % of information among the 10 Web sites. "WebElements" provides the most links among the 10 Web sites. It was concluded that if an individual teacher or student desires only raw physical data from element, the Internet might not be the best choice.

  7. 40 CFR 455.46 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PESTICIDE CHEMICALS Pesticide Chemicals Formulating and... listed in Table 8 to this part 455 (or received a modification by Best Engineering Judgement for...

  8. 40 CFR 455.46 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS PESTICIDE CHEMICALS Pesticide Chemicals Formulating and Packaging... listed in Table 8 to this part 455 (or received a modification by Best Engineering Judgement for...

  9. 40 CFR 455.47 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PESTICIDE CHEMICALS Pesticide Chemicals Formulating and... received a modification by Best Engineering Judgement for modifications not listed in Table 8 to this part...

  10. 40 CFR 455.46 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PESTICIDE CHEMICALS Pesticide Chemicals Formulating and... listed in Table 8 to this part 455 (or received a modification by Best Engineering Judgement for...

  11. 40 CFR 455.47 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PESTICIDE CHEMICALS Pesticide Chemicals Formulating and... received a modification by Best Engineering Judgement for modifications not listed in Table 8 to this part...

  12. 40 CFR 455.46 - Pretreatment standards for existing sources (PSES).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS PESTICIDE CHEMICALS Pesticide Chemicals Formulating and Packaging... listed in Table 8 to this part 455 (or received a modification by Best Engineering Judgement for...

  13. Saugus River and Tributaries Flood Damage Reduction Study: Lynn, Malden, Revere and Saugus, Massachusetts. Section 1. Feasibility Report.

    DTIC Science & Technology

    1989-12-01

    57 Table 5 Sensitivity Analysis - Point of Pines LPP 61 Table 6 Plan Comparison 64 Table 7 NED Plan Project Costs 96 Table 8 Estimated Operation...Costs 99 Table 13 Selected Plan/Estimated Annual Benefits 101 Table 14 Comparative Impacts - NED Regional Floodgate Plan 102 Table 15 Economic Analysis ...Includes detailed descriptions, plans and profiles and design considerations of the selected plan; coastal analysis of the shorefront; detailed project

  14. Ecological periodic tables for benthic macrofaunal usage of estuarine habitats

    EPA Science Inventory

    Southwood (1977: Journal of Animal Ecology 46: 337-365), in his presidential address to the British Ecological Society, compared the situation in ecology to that in chemistry before the development of the chemical periodic table when each fact, for example, the solubility or reac...

  15. Fully Exploiting The Potential Of The Periodic Table Through Pattern Recognition.

    ERIC Educational Resources Information Center

    Schultz, Emeric

    2005-01-01

    An approach to learning chemical facts that starts with the periodic table and depends primarily on recognizing and completing patterns and following a few simple rules is described. This approach exploits the exceptions that arise and uses them as opportunities for further concept development.

  16. Analysis of the IMS Location Accuracy in Northern Eurasia and North America Using Regional and Global Pn Travel-time Tables

    NASA Astrophysics Data System (ADS)

    United States Calibration Working Group, Russian Federation/

    - Joint Research Program of Seismic Calibration of the International Monitoring System (IMS) in Northern Eurasia and North America has been signed by the Nuclear Treaty Programs Office (NTPO), Department of Defense USA, and the Special Monitoring Service (SMS) of the Ministry of Defense, Russian Federation (RF). Under the Program historical data from nuclear and large chemical explosions of known location and shot time, together with appropriate geological and geophysical data, has been used to derive regional Pn/P travel-time tables for seismic event location within the lower 48 States of the USA and the European part of the RF. These travel-time tables are up to 5seconds faster in shields than the IASPEI91 tables, and up to 5seconds slower in the Western USA. Relocation experiments using the regional Pn travel-time curves and surrogate networks for the IMS network generally improved locations for regional seismic events. The distance between true and estimated location (mislocation) was decreased from an average of 18.8km for the IASPEI91 tables to 10.1km for the regional Pn travel-time tables. However, the regional travel-time table approach has limitations caused by travel-time variations inside major tectonic provinces and paths crossing several tectonic provinces with substantially different crustal and upper mantle velocity structure.The RF members of the Calibration Working Group (WG): Colonel Vyacheslav Gordon (chairman); Dr. Prof. Marat Mamsurov, and Dr. Nikolai Vasiliev. The US members of the WG: Dr. Anton Dainty (chairman), Dr. Douglas Baumgardt, Mr. John Murphy, Dr. Robert North, and Dr. Vladislav Ryaboy.

  17. Pivot tables for mortality analysis, or who needs life tables anyway?

    PubMed

    Wesley, David; Cox, Hugh F

    2007-01-01

    Actuarial life-table analysis has long been used by life insurance medical directors for mortality abstraction from clinical studies. Ironically, today's life actuary instead uses pivot tables to analyze mortality. Pivot tables (a feature/function in MS Excel) collapse various dimensions of data that were previously arranged in an "experience study" format. Summary statistics such as actual deaths, actual and expected mortality (usually measured in dollars), and calculated results such as actual to expected ratios, are then displayed in a 2-dimensional grid. The same analytic process, excluding the dollar focus, can be used for clinical mortality studies. For raw survival data, especially large datasets, this combination of experience study data and pivot tables has clear advantages over life-table analysis in both accuracy and flexibility. Using the SEER breast cancer data, we compare the results of life-table analysis and pivot-table analysis.

  18. On the occurrence of metallic character in the periodic table of the chemical elements.

    PubMed

    Hensel, Friedrich; Slocombe, Daniel R; Edwards, Peter P

    2015-03-13

    The classification of a chemical element as either 'metal' or 'non-metal' continues to form the basis of an instantly recognizable, universal representation of the periodic table (Mendeleeff D. 1905 The principles of chemistry, vol. II, p. 23; Poliakoff M. & Tang S. 2015 Phil. Trans. R. Soc. A 373: , 20140211). Here, we review major, pre-quantum-mechanical innovations (Goldhammer DA. 1913 Dispersion und Absorption des Lichtes; Herzfeld KF. 1927 Phys. Rev. 29: , 701-705) that allow an understanding of the metallic or non-metallic status of the chemical elements under both ambient and extreme conditions. A special emphasis will be placed on recent experimental advances that investigate how the electronic properties of chemical elements vary with temperature and density, and how this invariably relates to a changing status of the chemical elements. Thus, the prototypical non-metals, hydrogen and helium, becomes metallic at high densities; and the acknowledged metals, mercury, rubidium and caesium, transform into their non-metallic forms at low elemental densities. This reflects the fundamental fact that, at temperatures above the absolute zero of temperature, there is therefore no clear dividing line between metals and non-metals. Our conventional demarcation of chemical elements as metals or non-metals within the periodic table is of course governed by our experience of the nature of the elements under ambient conditions. Examination of these other situations helps us to examine the exact divisions of the chemical elements into metals and non-metals (Mendeleeff D. 1905 The principles of chemistry, vol. II, p. 23). © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  19. A Novel Approach: Chemical Relational Databases, and the Role of the ISSCAN Database on Assessing Chemical Carcinogenity

    EPA Science Inventory

    Mutagenicity and carcinogenicity databases are crucial resources for toxicologists and regulators involved in chemicals risk assessment. Until recently, existing public toxicity databases have been constructed primarily as "look-up-tables" of existing data, and most often did no...

  20. ChemCam for Mars Science Laboratory rover, undergoing pre-flight testing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2011-10-20

    Los Alamos National Laboratory and partners developed a laser instrument, ChemCam, that will ride on the elevated mast of the Mars Science Laboratory rover Curiosity. The system allows Curiosity to "zap" rocks from a distance, reading their chemical composition through spectroscopic analysis. In this video, laboratory shaker-table testing of the instrument ensures that all of its components are solidly attached and resistant to damage from the rigors of launch, travel and landing.

  1. ChemCam for Mars Science Laboratory rover, undergoing pre-flight testing

    ScienceCinema

    None

    2018-06-06

    Los Alamos National Laboratory and partners developed a laser instrument, ChemCam, that will ride on the elevated mast of the Mars Science Laboratory rover Curiosity. The system allows Curiosity to "zap" rocks from a distance, reading their chemical composition through spectroscopic analysis. In this video, laboratory shaker-table testing of the instrument ensures that all of its components are solidly attached and resistant to damage from the rigors of launch, travel and landing.

  2. A Compatibility Assessment and Comparison of the Flame Resistant Chemical-Biological (CB) Overgarment with the Standard ’A’ CB Overgarment.

    DTIC Science & Technology

    1982-01-01

    Overgarment-Dynamics .............. .19 TABLES 1. Basic Anthropometry .......... ...................... 3 2. Flame Resistant CB Overgarment Test...participants (TPs) during this evaluation. Basic anthropometry of these subjects is given in Table I. TABLE 1 Basic Anthropometry Mean SD Maximum...5 S H L XL 39 H L XL XXL 43 L XL XXL XXL The areas considered were ease of doffing and donning, compatibility with prescribed clothing and field

  3. Linking pollen quality and performance of Neoseiulus californicus (Acari: Phytoseiidae) in two-spotted spider mite management programmes.

    PubMed

    Khanamani, Mostafa; Fathipour, Yaghoub; Talebi, Ali Asghar; Mehrabadi, Mohammad

    2017-02-01

    It has been shown that pollen as a dietary supplement may increase the establishment of generalist predatory mites, and therefore pest control by these mites can be provided. Life table studies were performed to evaluate the nutritional value of seven different pollens (almond, castor-bean, date-palm, maize, bitter-orange, sunflower and mixed bee pollen) as a supplementary food source for the spider mite predator Neoseiulus californicus McGregor. In addition, the nutritional quality of each pollen species was assessed through morphological and chemical analysis. Preadult duration was longer when the predator fed on castor-bean pollen (10.01 days) and bee pollen (9.94 days) compared with the others (5.58-7.27 days). The cohort reared on almond pollen had the highest intrinsic rate of increase (r) (0.231 day -1 ), and those on mixed bee pollen had the lowest r (0.005 day -1 ). The levels of nutritional content (sugar, lipid and protein) were significantly different among tested pollens. Comparison of N. californicus life table parameters on different diets revealed that the almond pollen (and after that the maize pollen) was a more suitable diet than the others. These findings will be useful in developing appropriate strategies for conservation of N. californicus to control spider mites. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  4. Sunset dates of chemicals subject to final TSCA section 4: test requirements and related section 12(b) actions

    EPA Pesticide Factsheets

    This table lists all chemical substances and mixtures that are and/or have been the subject of final TSCA Section 4 test rules and/or TSCA Section 4 enforceable consent agreements/orders (ECAs) issued under the TSCA Existing Chemicals Testing Program.

  5. Sunset Dates of Chemicals Subject to Final TSCA Section 4 and Related 12(b) Actions

    EPA Pesticide Factsheets

    This Table lists, in ascending chemical Abstract Service (CAS) Registry number order, all chemical substances and mixtures that are and/or have been the subject of final TSCA Section 4 test rules and/or TSCA Section 4 enforceable consent agreements/orders.

  6. Exploring Chemical Equilibrium with Poker Chips: A General Chemistry Laboratory Exercise

    ERIC Educational Resources Information Center

    Bindel, Thomas H.

    2012-01-01

    A hands-on laboratory exercise at the general chemistry level introduces students to chemical equilibrium through a simulation that uses poker chips and rate equations. More specifically, the exercise allows students to explore reaction tables, dynamic chemical equilibrium, equilibrium constant expressions, and the equilibrium constant based on…

  7. Astrometric and Geodetic Properties of Earth and the Solar System

    NASA Technical Reports Server (NTRS)

    Yoder, Charles F.

    1995-01-01

    The mass, size and shape of planets and their satellites and are essential information from which one can consider the balance of gravity and tensile strength, chemical makeup and such factors as internal temperature or porosity. Orbits and planetary rotation are also useful clues concerning origin, internal structure and tidal history. The tables compiled here include some of the latest results such as detection of densities of Pluto-Charon from analysis of HST images and the latest results for Venus' shape, gravity field and pole orientation based on Magellan spacecraft data. Data concerning prominent asteroids, comets and Sun are also included. Most of the material here is presented as tables. They are preceded by brief explanations of the relevant geophysical and orbit parameters. More complete explanations can be found in any of several reference texts on geodesy, geophysics and celestial mechanics.

  8. Design of an ultraprecision computerized numerical control chemical mechanical polishing machine and its implementation

    NASA Astrophysics Data System (ADS)

    Zhang, Chupeng; Zhao, Huiying; Zhu, Xueliang; Zhao, Shijie; Jiang, Chunye

    2018-01-01

    The chemical mechanical polishing (CMP) is a key process during the machining route of plane optics. To improve the polishing efficiency and accuracy, a CMP model and machine tool were developed. Based on the Preston equation and the axial run-out error measurement results of the m circles on the tin plate, a CMP model that could simulate the material removal at any point on the workpiece was presented. An analysis of the model indicated that lower axial run-out error led to lower material removal but better polishing efficiency and accuracy. Based on this conclusion, the CMP machine was designed, and the ultraprecision gas hydrostatic guideway and rotary table as well as the Siemens 840Dsl numerical control system were incorporated in the CMP machine. To verify the design principles of machine, a series of detection and machining experiments were conducted. The LK-G5000 laser sensor was employed for detecting the straightness error of the gas hydrostatic guideway and the axial run-out error of the gas hydrostatic rotary table. A 300-mm-diameter optic was chosen for the surface profile machining experiments performed to determine the CMP efficiency and accuracy.

  9. The Chemical Composition of Maple Syrup

    ERIC Educational Resources Information Center

    Ball, David W.

    2007-01-01

    Maple syrup is one of several high-sugar liquids that humans consume. However, maple syrup is more than just a concentrated sugar solution. Here, we review the chemical composition of maple syrup. (Contains 4 tables and 1 figure.)

  10. Discrete-Event Simulation in Chemical Engineering.

    ERIC Educational Resources Information Center

    Schultheisz, Daniel; Sommerfeld, Jude T.

    1988-01-01

    Gives examples, descriptions, and uses for various types of simulation systems, including the Flowtran, Process, Aspen Plus, Design II, GPSS, Simula, and Simscript. Explains similarities in simulators, terminology, and a batch chemical process. Tables and diagrams are included. (RT)

  11. Enhanced Superconductors

    DTIC Science & Technology

    1992-05-01

    The monomer 1-chloro-l-fluoroethylene (CFE) was obtained from PCR Research Chemicals Inc., and purified by drying and removal of inhibitor (if present...90 5 2.5 VPC-138-2 7.6 (TN) 90 5 4.4 aRefer Table 1 for details of these samples. bTK = Thick filn; TN = Thin film. 50 Table 3 ’Bromine Doping

  12. 30 CFR 47.92 - Exemptions from labeling.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... COMMUNICATION (HazCom) Exemptions § 47.92 Exemptions from labeling. A hazardous chemical is exempt from subpart E of this part under the conditions described in Table 47.92 as follows: Table 47.92—Hazardous... accordance with EPA regulations. Hazardous waste When regulated by EPA under the Solid Waste Disposal Act as...

  13. Rumsey and Walker_AMT_2016_Table 1

    EPA Pesticide Factsheets

    Table summarizes instrument analytical detection limits, including liquid and equivalent air concentrations.This dataset is associated with the following publication:Rumsey, I. Application of an online ion chromatography-based instrument for gradient flux measurements of speciated nitrogen and sulfur. ENVIRONMENTAL SCIENCE & TECHNOLOGY. American Chemical Society, Washington, DC, USA, 9(6): 2581-2592, (2016).

  14. 40 CFR Table 4 to Subpart Jj of... - Pollutants Excluded From Use in Cleaning and Washoff Solvents

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Cleaning and Washoff Solvents 4 Table 4 to Subpart JJ of Part 63 Protection of Environment ENVIRONMENTAL... Cleaning and Washoff Solvents Chemical name CAS No. 4-Aminobiphenyl 92671 Styrene oxide 96093 Diethyl...-chloroethyl) ether) 111444 1,2-Diphenylhydrazine 122667 Toxaphene (chlorinated camphene) 8001352 2,4...

  15. 42 CFR Appendix - Tables to Subpart L of Part 84

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Tables to Subpart L of Part 84 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Chemical Cartridge Respirators Bench tests; gas and vapor tests; minimum requirements;...

  16. Exploring the ground ice recharge near permafrost table on the central Qinghai-Tibet Plateau using chemical and isotopic data

    NASA Astrophysics Data System (ADS)

    Wang, Weihua; Wu, Tonghua; Zhao, Lin; Li, Ren; Zhu, Xiaofan; Wang, Wanrui; Yang, Shuhua; Qin, Yanhui; Hao, Junmin

    2018-05-01

    Thawing permafrost on the Qinghai-Tibet Plateau (QTP) has great impacts on the local hydrological process by way of causing ground ice to thaw. Until now there is little knowledge on ground ice hydrology near permafrost table under a warming climate. This study applied stable tracers (isotopes and chloride) and hydrograph separation model to quantify the sources of ground ice near permafrost table in continuous permafrost regions of the central QTP. The results indicated that the ground ice near permafrost table was mainly supplied by active layer water and permafrost water, accounting for 58.9 to 87.0% and 13.0 to 41.1%, respectively, which implying that the active layer was the dominant source. The contribution rates from the active layer to the ground ice in alpine meadow (59 to 69%) was less than that in alpine steppe (70 to 87%). It showed well-developed hydrogeochemical depth gradients, presenting depleted isotopes and positive chemical gradients with depth within the soil layer. The effects of evaporation and freeze-out fractionation on the soil water and ground ice were evident. The results provide additional insights into ground ice sources and cycling near permafrost table in permafrost terrain, and would be helpful for improving process-based detailed hydrologic models under the occurring global warming.

  17. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Thomas, J.M.; Callahan, C.A.; Cline, J.F.

    Bioassays were used in a three-phase research project to assess the comparative sensitivity of test organisms to known chemicals, determine if the chemical components in field soil and water samples containing unknown contaminants could be inferred from our laboratory studies using known chemicals, and to investigate kriging (a relatively new statistical mapping technique) and bioassays as methods to define the areal extent of chemical contamination. The algal assay generally was most sensitive to samples of pure chemicals, soil elutriates and water from eight sites with known chemical contamination. Bioassays of nine samples of unknown chemical composition from the Rocky Mountainmore » Arsenal (RMA) site showed that a lettuce seed soil contact phytoassay was most sensitive. In general, our bioassays can be used to broadly identify toxic components of contaminated soil. Nearly pure compounds of insecticides and herbicides were less toxic in the sensitive bioassays than were the counterpart commercial formulations. This finding indicates that chemical analysis alone may fail to correctly rate the severity of environmental toxicity. Finally, we used the lettuce seed phytoassay and kriging techniques in a field study at RMA to demonstrate the feasibility of mapping contamination to aid in cleanup decisions. 25 references, 9 figures, 9 tables.« less

  18. Bioinorganic Life and Neural Activity: Toward a Chemistry of Consciousness?

    PubMed

    Chang, Christopher J

    2017-03-21

    Identifying what elements are required for neural activity as potential path toward consciousness, which represents life with the state or quality of awareness, is a "Holy Grail" of chemistry. As life itself arises from coordinated interactions between elements across the periodic table, the majority of which are metals, new approaches for analysis, binding, and control of these primary chemical entities can help enrich our understanding of inorganic chemistry in living systems in a context that is both universal and personal.

  19. Effects of surface run-off on the transport of agricultural chemicals to ground water in a sandplain setting

    USGS Publications Warehouse

    Delin, G.N.; Landon, M.K.

    2002-01-01

    An experiment was conducted at a depressional (lowland) and an upland site in sandy soils to evaluate the effects of surface run-off on the transport of agricultural chemicals to ground water. Approximately 16.5 cm of water was applied to both sites during the experiment, representing a natural precipitation event with a recurrence interval of approximately 100 years. Run-off was quantified at the lowland site and was not detected at the upland site during the experiment. Run-off of water to the lowland site was the most important factor affecting differences in the concentrations and fluxes of the agricultural chemicals between the two sites. Run-off of water to the lowland site appears to have played a dual role by diluting chemical concentrations in the unsaturated zone as well as increasing the concentrations at the water table, compared to the upland site. Concentrations of chloride, nitrate and atrazine plus metabolites were noticeably greater at the water table than in the unsaturated zone at both sites. The estimated mass flux of chloride and nitrate to the water table during the test were 5-2 times greater, respectively, at the lowland site compared to the upland site, whereas the flux of sulfate and atrazine plus metabolites was slightly greater at the upland site. Results indicate that matrix flow of water and chemicals was the primary process causing the observed differences between the two sites. Results of the experiment illustrate the effects of heterogeneity and the complexity of evaluating chemical transport through the unsaturated zone. Copyright ?? 2002 Elsevier Science B.V.

  20. Effects of surface run-off on the transport of agricultural chemicals to ground water in a sandplain setting

    USGS Publications Warehouse

    Delin, Geoffrey N.; Landon, Matthew K.

    2002-01-01

    An experiment was conducted at a depressional (lowland) and an upland site in sandy soils to evaluate the effects of surface run-off on the transport of agricultural chemicals to ground water. Approximately 16.5 cm of water was applied to both sites during the experiment, representing a natural precipitation event with a recurrence interval of approximately 100 years. Run-off was quantified at the lowland site and was not detected at the upland site during the experiment. Run-off of water to the lowland site was the most important factor affecting differences in the concentrations and fluxes of the agricultural chemicals between the two sites. Run-off of water to the lowland site appears to have played a dual role by diluting chemical concentrations in the unsaturated zone as well as increasing the concentrations at the water table, compared to the upland site. Concentrations of chloride, nitrate and atrazine plus metabolites were noticeably greater at the water table than in the unsaturated zone at both sites. The estimated mass flux of chloride and nitrate to the water table during the test were 5–2 times greater, respectively, at the lowland site compared to the upland site, whereas the flux of sulfate and atrazine plus metabolites was slightly greater at the upland site. Results indicate that matrix flow of water and chemicals was the primary process causing the observed differences between the two sites. Results of the experiment illustrate the effects of heterogeneity and the complexity of evaluating chemical transport through the unsaturated zone.

  1. A Computer Algebra Approach to Solving Chemical Equilibria in General Chemistry

    ERIC Educational Resources Information Center

    Kalainoff, Melinda; Lachance, Russ; Riegner, Dawn; Biaglow, Andrew

    2012-01-01

    In this article, we report on a semester-long study of the incorporation into our general chemistry course, of advanced algebraic and computer algebra techniques for solving chemical equilibrium problems. The method presented here is an alternative to the commonly used concentration table method for describing chemical equilibria in general…

  2. What Is a Chemical Element?

    ERIC Educational Resources Information Center

    ten Hoor, Marten J.

    2017-01-01

    Contrary to current IUPAC recommendations, the chemical element X should be defined as the nucleus of the X atom. Consequently, different isotopes with their different nuclei belong to different elements, each one with its own physical and chemical properties. This view leads to the conclusion that we no longer have a periodic table of the…

  3. VizieR Online Data Catalog: Partition functions for molecules and atoms (Barklem+, 2016)

    NASA Astrophysics Data System (ADS)

    Barklem, P. S.; Collet, R.

    2016-02-01

    The results and input data are presented in the following files. Table 1 contains dissociation energies from the literature, and final adopted values, for 291 molecules. The literature values are from the compilations of Huber & Herzberg (1979, Constants of Diatomic Molecules (Van Nostrand Reinhold), Luo (2007, Comprehensive Handbook of Chemical Bond Energies (CRC Press)) and G2 theory calculations of Curtiss et al. (1991, J. Chem. Phys., 94, 7221). Table 2 contains the input data for the molecular calculations including adopted dissociation energy, nuclear spins, molecular spectroscopic constants and their sources. There are 291 files, one for each molecule, labelled by the molecule name. The various molecular spectroscopic constants are as defined in the paper. Table 4 contains the first, second and third ionisation energies for all chemical elements from H to U. The data comes from the CRC Handbook of Chemistry and Physics (Haynes, W.M. 2010, CRC Handbook of Chemistry and Physics, 91st edn. (CRC Press, Taylor and Francis Group)). Table 5a contains a list of keys to bibliographic references for the atomic energy level data that was extracted from NIST Atomic Spectra Database and used in the present work to compute atomic partition functions. The citation keys are abbreviations of the full bibliographic references which are made available in Table 5b in BibTeX format. Table 5b contains the full bibliographic references for the atomic energy level data that was extracted from the NIST Atomic Spectra Database. Table 6 contains tabulated partition function data as a function of temperature for 291 molecules. Table 7 contains tabulated equilibrium constant data as a function of temperature for 291 molecules. Table 8 contains tabulated partition function data as a function of temperature for 284 atoms and ions. The paper should be consulted for further details. (10 data files).

  4. Assessing contributory risk using economic input-output life-cycle analysis.

    PubMed

    Miller, Ian; Shelly, Michael; Jonmaire, Paul; Lee, Richard V; Harbison, Raymond D

    2005-04-01

    The contribution of consumer purchases of non-essential products to environmental pollution is characterized. Purchase decisions by consumers induce a complex sequence of economy-wide production interactions that influence the production and consumption of chemicals and subsequent exposure and possible public health risks. An economic input-output life-cycle analysis (EIO-LCA) was used to link resource consumption and production by manufacturers to corresponding environmental impacts. Using the US Department of Commerce's input-output tables together with the US Environmental Protection Agency's Toxics Release Inventory and AIRData databases, the economy-wide air discharges resulting from purchases of household appliances, motor homes, and games and toys were quantified. The economic and environmental impacts generated from a hypothetical 10,000 US dollar purchase for selected consumer items were estimated. The analysis shows how purchases of seemingly benign consumer products increase the output of air pollutants along the supply chain and contribute to the potential risks associated with environmental chemical exposures to both consumers and non-consumers alike.

  5. Distribution of volatile organic chemicals in outdoor and indoor air

    NASA Technical Reports Server (NTRS)

    Shah, Jitendra J.; Singh, Hanwant B.

    1988-01-01

    The EPA volatile organic chemistry (VOC) national ambient data base (Shah, 1988) is discussed. The 320 chemicals included in the VOC data base are listed. The methods used to obtain the data are reviewed and the availability, accessibility, and operation of the data base are examined. Tables of the daily outdoor concentrations for 66 chemicals and the daily indoor concentrations for 35 chemicals are presented.

  6. Comparison of point-source pollutant loadings to soil and groundwater for 72 chemical substances.

    PubMed

    Yu, Soonyoung; Hwang, Sang-Il; Yun, Seong-Taek; Chae, Gitak; Lee, Dongsu; Kim, Ki-Eun

    2017-11-01

    Fate and transport of 72 chemicals in soil and groundwater were assessed by using a multiphase compositional model (CompFlow Bio) because some of the chemicals are non-aqueous phase liquids or solids in the original form. One metric ton of chemicals were assumed to leak in a stylized facility. Scenarios of both surface spills and subsurface leaks were considered. Simulation results showed that the fate and transport of chemicals above the water table affected the fate and transport of chemicals below the water table, and vice versa. Surface spill scenarios caused much less concentrations than subsurface leak scenarios because leaching amounts into the subsurface environment were small (at most 6% of the 1 t spill for methylamine). Then, simulation results were applied to assess point-source pollutant loadings to soil and groundwater above and below the water table, respectively, by multiplying concentrations, impact areas, and durations. These three components correspond to the intensity of contamination, mobility, and persistency in the assessment of pollutant loading, respectively. Assessment results showed that the pollutant loadings in soil and groundwater were linearly related (r 2  = 0.64). The pollutant loadings were negatively related with zero-order and first-order decay rates in both soil (r = - 0.5 and - 0.6, respectively) and groundwater (- 1.0 and - 0.8, respectively). In addition, this study scientifically defended that the soil partitioning coefficient (K d ) significantly affected the pollutant loadings in soil (r = 0.6) and the maximum masses in groundwater (r = - 0.9). However, K d was not a representative factor for chemical transportability unlike the expectation in chemical ranking systems of soil and groundwater pollutants. The pollutant loadings estimated using a physics-based hydrogeological model provided a more rational ranking for exposure assessment, compared to the summation of persistency and transportability scores in the chemical ranking systems. In the surface spill scenario, the pollutant loadings were zeros for all chemicals, except methylamine to soil whose pollutant loading was smaller than that in the subsurface leak scenario by 4 orders of magnitude. The maximum mass and the average mass multiplied by duration in soil greatly depended on leaching fluxes (r = 1.0 and 0.9, respectively), while the effect of leaching fluxes diminished below the water table. The contribution of this work is that a physics-based numerical model was used to quantitatively compare the subsurface pollutant loading in a chemical accident for 72 chemical substances, which can scientifically defend a simpler and more qualitative assessment of pollutant loadings. Besides, this study assessed pollutant loadings to soil (unsaturated zone) and groundwater (saturated zone) all together and discussed their interactions.

  7. Evolution and perspectives of cultivar identification and traceability from tree to oil and table olives by means of DNA markers.

    PubMed

    Pasqualone, Antonella; Montemurro, Cinzia; di Rienzo, Valentina; Summo, Carmine; Paradiso, Vito Michele; Caponio, Francesco

    2016-08-01

    In recent years, an increasing number of typicality marks has been awarded to high-quality olive oils produced from local cultivars. In this case, quality control requires effective varietal checks of the starting materials. Moreover, accurate cultivar identification is essential in vegetative-propagated plants distributed by nurseries and is a pre-requisite to register new cultivars. Food genomics provides many tools for cultivar identification and traceability from tree to oil and table olives. The results of the application of different classes of DNA markers to olive with the purpose of checking cultivar identity and variability of plant material are extensively discussed in this review, with special regard to repeatability issues and polymorphism degree. The characterization of olive germplasm from all countries of the Mediterranean basin and from less studied geographical areas is described and innovative high-throughput molecular tools to manage reference collections are reviewed. Then the transferability of DNA markers to processed products - virgin olive oils and table olives - is overviewed to point out strengths and weaknesses, with special regard to (i) the influence of processing steps and storage time on the quantity and quality of residual DNA, (ii) recent advances to overcome the bottleneck of DNA extraction from processed products, (iii) factors affecting whole comparability of DNA profiles between fresh plant materials and end-products, (iv) drawbacks in the analysis of multi-cultivar versus single-cultivar end-products and (v) the potential of quantitative polymerase chain reaction (PCR)-based techniques. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  8. Hydrogeologic reconnaissance of the Swope Oil Superfund site and vicinity, Camden and Burlington counties, New Jersey

    USGS Publications Warehouse

    Barton, G.J.; Krebs, M.M.

    1990-01-01

    Groundwater beneath a former chemical reclamation facility in New Jersey is contaminated with metals and organic compounds. The off-site migration of these compounds has not been studied; however, a nearby public-supply well is contaminated, and a public-supply well 1,400 ft downgradient from the site may be threatened. The study area, in the New Jersey part of the Atlantic Coastal Plain, is underlain by alluvial deposits composed of gravel, sand, silt, and clay. These deposits comprise the water table aquifer, the confining units, and the confined aquifer throughout the study area. The water table beneath the Swope Oil Superfund site is approximately 17 ft below sea level and groundwater levels throughout the study area are below the stage of the Delaware River. The aquifer system is recharged by precipitation, leakage of water through confining units, and the water induced from the Delaware River. Five public supply-well fields, primarily adjacent to the Delaware River, and four waste disposal sites with observation well networks are located in the study area. Both the water table and confined aquifers are contaminated in several locations. The concentration of metals and/or purgeable organic compounds in more than 20 wells exceeds the U.S. Environmental Protection Agency primary drinking-water standard and the New Jersey Department of Environmental Protection recommended drinking water criteria. Selected data from wells and test borings are presented, including well construction details; drillers ', geologists ', and geophysical logs; water levels; specific-capacity and slug test data; and chemical analysis of groundwater samples. (USGS)

  9. Molecular Simulations of Shear-Induced Dynamics in Nitromethane

    DTIC Science & Technology

    2016-09-01

    initially staggered along the y axis, and then after the crystal is sheared b), the NM molecules are rotated to orient themselves in the same... rotation of the grain. ...............................................................................8 List of Tables Table 1 Summary of the maximum...it an ideal candidate to study chemical reaction mechanisms associated with conventional explosive initiation and subsequent detonation .3,6,7

  10. 30 CFR 47.91 - Exemptions from the HazCom standard.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Exemptions from the HazCom standard. 47.91... TRAINING HAZARD COMMUNICATION (HazCom) Exemptions § 47.91 Exemptions from the HazCom standard. A hazardous chemical is exempt from this part under the conditions described in Table 47.91 as follows: Table 47.91...

  11. 40 CFR Table 4 to Subpart F of... - Organic Hazardous Air Pollutants Subject to Cooling Tower Monitoring Requirements in § 63.104

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table... 40 Protection of Environment 9 2011-07-01 2011-07-01 false Organic Hazardous Air Pollutants...

  12. 40 CFR Table 4 to Subpart F of... - Organic Hazardous Air Pollutants Subject to Cooling Tower Monitoring Requirements in § 63.104

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table... 40 Protection of Environment 10 2014-07-01 2014-07-01 false Organic Hazardous Air Pollutants...

  13. 40 CFR Table 4 to Subpart F of... - Organic Hazardous Air Pollutants Subject to Cooling Tower Monitoring Requirements in § 63.104

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table... 40 Protection of Environment 10 2013-07-01 2013-07-01 false Organic Hazardous Air Pollutants...

  14. Drug Scene Syllabus, A Manual on Drugs and Volatile Chemical of Potential Abuse.

    ERIC Educational Resources Information Center

    Johnson, Robert B.; And Others

    A brief historical review of attempts to control the abuse of drugs introduces a series of tables listing pertinent information about drugs of potential abuse. Each table provides the common commercial and slang names for the drugs, their medical and legal classification, their potential for emotional and physical dependence, whether the user…

  15. Helping Students Understand the Role of Symmetry in Chemistry Using the Particle-in-a-Box Model

    ERIC Educational Resources Information Center

    Manae, Meghna A.; Hazra, Anirban

    2016-01-01

    In a course on chemical applications of symmetry and group theory, students learn to use several useful tools (like character tables, projection operators, and correlation tables), but in the process of learning the mathematical details, they often miss the conceptual big picture about "why" and "how" symmetry leads to the…

  16. Corrigendum to "Geochemistry and geochronology of orthogneisses in Bode Saadu area, southwestern Nigeria and their implications for the Paleoproterozoic evolution of the area" [J. African Earth Sciences 109 (2015) 131-142

    NASA Astrophysics Data System (ADS)

    Okonkwo, Chukwuemeka T.; Ganev, Valentin Y.

    2018-04-01

    The authors regret the error in Table 1-Chemical composition of the orthogneisses where the sum of the elements for each sample was mistakenly indicated as LOI (loss on ignition). The correct table is given below.

  17. Efficient first-principles prediction of solid stability: Towards chemical accuracy

    NASA Astrophysics Data System (ADS)

    Zhang, Yubo; Kitchaev, Daniil A.; Yang, Julia; Chen, Tina; Dacek, Stephen T.; Sarmiento-Pérez, Rafael A.; Marques, Maguel A. L.; Peng, Haowei; Ceder, Gerbrand; Perdew, John P.; Sun, Jianwei

    2018-03-01

    The question of material stability is of fundamental importance to any analysis of system properties in condensed matter physics and materials science. The ability to evaluate chemical stability, i.e., whether a stoichiometry will persist in some chemical environment, and structure selection, i.e. what crystal structure a stoichiometry will adopt, is critical to the prediction of materials synthesis, reactivity and properties. Here, we demonstrate that density functional theory, with the recently developed strongly constrained and appropriately normed (SCAN) functional, has advanced to a point where both facets of the stability problem can be reliably and efficiently predicted for main group compounds, while transition metal compounds are improved but remain a challenge. SCAN therefore offers a robust model for a significant portion of the periodic table, presenting an opportunity for the development of novel materials and the study of fine phase transformations even in largely unexplored systems with little to no experimental data.

  18. Paper Tools and Periodic Tables: Newlands and Mendeleev Draw Grids.

    PubMed

    Gordin, Michael D

    2018-02-01

    This essay elaborates on Ursula Klein's methodological concept of "paper tools" by drawing on several examples from the history of the periodic table. Moving from John A. R. Newlands's "Law of Octaves," to Dmitrii Mendeleev's first drafts of his periodic system in 1869, to Mendeleev's chemical speculations on the place of the ether within his classification, one sees that the ways in which the scientists presented the balance between empirical data and theoretical manipulation proved crucial for the chemical community's acceptance or rejection of their proposed innovations. This negotiated balance illustrates an underemphasised feature of Klein's conceptualisation of the ways in which a paper tool generates new knowledge.

  19. Table of Phenylalanine Content of Foods: Comparative Analysis of Data Compiled in Food Composition Tables.

    PubMed

    Araújo, Ana Claudia Marquim F; Araújo, Wilma M C; Marquez, Ursula M Lanfer; Akutsu, Rita; Nakano, Eduardo Y

    2017-01-01

    Knowing the phenylalanine (Phe) content of foods is essential for managing the diet of patients with phenylketonuria. Data on the Phe content of foods are scarce and sometimes vary between different Food Composition Tables (FCT). Brazil created its own table of the Phe contents of fruits and vegetables based exclusively on the chemical analysis of protein content, considering that proteins contain 3-4% Phe (TCFA/ANVISA). This study compared the protein and Phe contents of vegetables and fruits provided by the TCFA/ANVISA with those listed in international food composition tables. The Phe content of 71 fruits and vegetables listed in TCFA/ANVISA was classified into four subgroups, and the Wilcoxon nonparametric test compared the Phe and mean protein contents provided by the FCTs. All tests considered the bilateral hypothesis, and the level of significance was set at 5%. The Spearman's correlation coefficient measured the statistical dependence between Phe and protein contents. The mean Phe content was <50 mg Phe/100 g for 15 fruits; >50 mg/100 g for 11 type-A vegetables; <50 mg/100 g for 8 type-B vegetables; ≤50 mg/100 g for 7 type-C vegetables. The percentage of Phe in protein varied from 3.13 ± 1.03% to 3.74 ± 2.55% in fruits; 3.33 ± 1.41 to 4.82 ± 1.17 in type-A vegetables; 3.46 ± 1.25% to 4.83 ± 2.46 in type-B vegetables; and 3.14% ± 1.49 to 4.62% ± 2.26 in type-C vegetables. The Phe and protein contents provided by most FCTs were positively correlated, suggesting that it is possible to estimate the Phe content of fruits by multiplying its protein content by 3%. For type-A, -B, and -C vegetables, 4% may be used.

  20. Sensory classification of table olives using an electronic tongue: Analysis of aqueous pastes and brines.

    PubMed

    Marx, Ítala; Rodrigues, Nuno; Dias, Luís G; Veloso, Ana C A; Pereira, José A; Drunkler, Deisy A; Peres, António M

    2017-01-01

    Table olives are highly appreciated and consumed worldwide. Different aspects are used for trade category classification being the sensory assessment of negative defects present in the olives and brines one of the most important. The trade category quality classification must follow the International Olive Council directives, requiring the organoleptic assessment of defects by a trained sensory panel. However, the training process is a hard, complex and sometimes subjective task, being the low number of samples that can be evaluated per day a major drawback considering the real needs of the olive industry. In this context, the development of electronic tongues as taste sensors for defects' sensory evaluation is of utmost relevance. So, an electronic tongue was used for table olives classification according to the presence and intensity of negative defects. Linear discrimination models were established based on sub-sets of sensor signals selected by a simulated annealing algorithm. The predictive potential of the novel approach was first demonstrated for standard solutions of chemical compounds that mimic butyric, putrid and zapateria defects (≥93% for cross-validation procedures). Then its applicability was verified; using reference table olives/brine solutions samples identified with a single intense negative attribute, namely butyric, musty, putrid, zapateria or winey-vinegary defects (≥93% cross-validation procedures). Finally, the E-tongue coupled with the same chemometric approach was applied to classify table olive samples according to the trade commercial categories (extra, 1 st choice, 2 nd choice and unsuitable for consumption) and an additional quality category (extra free of defects), established based on sensory analysis data. Despite the heterogeneity of the samples studied and number of different sensory defects perceived, the predictive linear discriminant model established showed sensitivities greater than 86%. So, the overall performance achieved showed that the electrochemical device could be used as a taste sensor for table olives organoleptic trade successful classification, allowing a preliminary quality assessment, which could facilitate, in the future, the complex task of sensory panelists. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. ToxRefDB - Release user-friendly web-based tool for mining ToxRefDB

    EPA Science Inventory

    The updated URL link is for a table of NCCT ToxCast public datasets. The next to last row of the table has the link for the US EPA ToxCast ToxRefDB Data Release October 2014. ToxRefDB provides detailed chemical toxicity data in a publically accessible searchable format. ToxRefD...

  2. Combination of hot water and rachis removal as an alternative to chemical treatment for maintaining the quality of table grapes

    USDA-ARS?s Scientific Manuscript database

    Decay and rachis browning are major problems that limit the shelf life of fresh table grapes (Vitis vinifera cv. Crismons seedless) and are often controlled by application of sulfur dioxide (SO2) to maintain quality. However, sulphite residues pose a health risk for allergic individuals and SO2 appl...

  3. The Examination of the Aluminum Alloy 7017 as a Replacement for the Aluminum Alloy 7039 in Lightweight Armor Systems

    DTIC Science & Technology

    2016-07-01

    ORGANIZATION REPORT NUMBER ARL-TR-7727 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10 . SPONSOR/MONITOR’S ACRONYM(S) 11. SPONSOR/MONITOR’S...of 0.50-cal. FSP vs. AA7017 plate at 0° .......................................................................................................... 10 ... 10 List of Tables Table 1 Chemical composition, weight percent

  4. 40 CFR Table A-1 to Subpart A of... - Global Warming Potentials

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 22 2013-07-01 2013-07-01 false Global Warming Potentials A Table A-1... A-1 to Subpart A of Part 98—Global Warming Potentials Global Warming Potentials [100-Year Time Horizon] Name CAS No. Chemical formula Global warming potential(100 yr.) Carbon dioxide 124-38-9 CO2 1...

  5. 40 CFR Table A-1 to Subpart A of... - Global Warming Potentials

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 21 2014-07-01 2014-07-01 false Global Warming Potentials A Table A-1... A-1 to Subpart A of Part 98—Global Warming Potentials Global Warming Potentials [100-Year Time Horizon] Name CAS No. Chemical formula Global warming potential(100 yr.) Carbon dioxide 124-38-9 CO2 1...

  6. An Experimental Study in the Mechanical Response of Polymer Modified Geopolymers

    DTIC Science & Technology

    2012-04-01

    Compressive and Bending Strength of Fly ash Geopolymers ... 22 LIST OF TABLES Page Table 1. Chemical Composition of Aluminosilicates in Mass... geopolymer matrix composites .” Ceramic Transactions, 153, 227-250. 3. Davidovits J., 1991. “ Geopolymers , inorganic polymeric materials.” Journal of...Understanding the relationship between geopolymer composition , microstructure and mechanical properties.” Colloids and Surfaces.A, Physicochemical

  7. ENGINEERED BARRIER SYSTEM: PHYSICAL AND CHEMICAL ENVIRONMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    R. Jarek

    2005-08-29

    The purpose of this model report is to describe the evolution of the physical and chemical environmental conditions within the waste emplacement drifts of the repository, including the drip shield and waste package surfaces. The resulting seepage evaporation and gas abstraction models are used in the total system performance assessment for the license application (TSPA-LA) to assess the performance of the engineered barrier system and the waste form. This report develops and documents a set of abstraction-level models that describe the engineered barrier system physical and chemical environment. Where possible, these models use information directly from other reports as input,more » which promotes integration among process models used for TSPA-LA. Specific tasks and activities of modeling the physical and chemical environment are included in ''Technical Work Plan for: Near-Field Environment and Transport In-Drift Geochemistry Model Report Integration'' (BSC 2005 [DIRS 173782], Section 1.2.2). As described in the technical work plan, the development of this report is coordinated with the development of other engineered barrier system reports. To be consistent with other project documents that address features, events, and processes (FEPs), Table 6.14.1 of the current report includes updates to FEP numbers and FEP subjects for two FEPs identified in the technical work plan (TWP) governing this report (BSC 2005 [DIRS 173782]). FEP 2.1.09.06.0A (Reduction-oxidation potential in EBS), as listed in Table 2 of the TWP (BSC 2005 [DIRS 173782]), has been updated in the current report to FEP 2.1.09.06.0B (Reduction-oxidation potential in Drifts; see Table 6.14-1). FEP 2.1.09.07.0A (Reaction kinetics in EBS), as listed in Table 2 of the TWP (BSC 2005 [DIRS 173782]), has been updated in the current report to FEP 2.1.09.07.0B (Reaction kinetics in Drifts; see Table 6.14-1). These deviations from the TWP are justified because they improve integration with FEPs documents. The updates have no impact on the model developed in this report.« less

  8. 40 CFR Table 5 to Subpart Jjjjj of... - Continuous Compliance With Emission Limits and Operating Limits

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... system, or other system; recording all monitor or sensor output, and if lime is found not to be free... chemicals are added to the scrubber water, collecting the scrubber chemical feed rate data according to § 63...

  9. 40 CFR 63.101 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry § 63.101... 71. Organic hazardous air pollutant or organic HAP means one of the chemicals listed in table 2 of... or more organic reactants to produce one or more organic compounds. Air oxidation reactor includes...

  10. 40 CFR 63.101 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry § 63.101... 71. Organic hazardous air pollutant or organic HAP means one of the chemicals listed in table 2 of... or more organic reactants to produce one or more organic compounds. Air oxidation reactor includes...

  11. 40 CFR 63.101 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry § 63.101... 71. Organic hazardous air pollutant or organic HAP means one of the chemicals listed in table 2 of... or more organic reactants to produce one or more organic compounds. Air oxidation reactor includes...

  12. 76 FR 34147 - Land Disposal Restrictions: Revision of the Treatment Standards for Carbamate Wastes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-13

    ... carbamate wastewaters to be treated using combustion, chemical oxidation, biodegradation or carbon..., biodegradation or carbon adsorption for wastewaters. The numeric treatment standard concentration limits were... in the table 40 CFR 268.42) for nonwastewaters; and, combustion, chemical oxidation, biodegradation...

  13. Mission Connect Mild TBI Translational Research Consortium

    DTIC Science & Technology

    2009-08-01

    and only minimally effective in-vivo. Initially, we identified carbon nanomaterials as potent antioxidants using a chemical ORAC assay. We...radical absorbency capacity ( ORAC ) assay using a chemical source for the oxygen radical (,′-azodiisobutyramidine dihydrochloride) (Table 1). We...nanomaterials determined with a chemically based ORAC assay.a Nanomaterial Trolox Equivalents (TE) Trolox Mass Equivalents (TME) p-SWCNT 14046 5.02

  14. An Analysis of Class II Supplies Requisitions in the Korean Army’s Organizational Supply

    DTIC Science & Technology

    2009-03-26

    five methods for qualitative research : Case study , Ethnography , 45 Phenomenological study , Grounded theory , and...Approaches .. 42 Table 9 Five Qualitative Research Methods ..................................................................... 45 Table 10 Six...Content analysis. Table 9 provides a brief overview of the five methods . Table 9 Five Qualitative

  15. Scombroid Poisoning

    PubMed Central

    Lerke, Peter A.; Werner, S. Benson; Taylor, Stephen L.; Guthertz, Linda S.

    1978-01-01

    An outbreak of scombroid poisoning occurred in San Francisco in the fall of 1977. The vehicle was sashimi prepared from spoiled tuna fish. Prompt public health measures prevented further consumption of the implicated food. Laboratory studies showed the presence in the tuna of bacterial species capable of producing large amounts of histamine, a substance strongly implicated in scombroid poisoning. Chemical analysis showed that histamine is very unevenly distributed in the flesh of spoiling tuna, therefore accounting for the sometimes random occurrence of disease among people eating the same food at the same table. PMID:569397

  16. Scombroid poisoning. Report of an outbreak.

    PubMed

    Lerke, P A; Werner, S B; Taylor, S L; Guthertz, L S

    1978-11-01

    An outbreak of scombroid poisoning occurred in San Francisco in the fall of 1977. The vehicle was sashimi prepared from spoiled tuna fish. Prompt public health measures prevented further consumption of the implicated food. Laboratory studies showed the presence in the tuna of bacterial species capable of producing large amounts of histamine, a substance strongly implicated in scombroid poisoning. Chemical analysis showed that histamine is very unevenly distributed in the flesh of spoiling tuna, therefore accounting for the sometimes random occurrence of disease among people eating the same food at the same table.

  17. The Chemical Characterization of Pollutants in Waste Water from Volunteer Army Ammunition Plant.

    DTIC Science & Technology

    1981-08-01

    tionating procedure was repeated with 40 mL of CW3 after adjusting its pH to 2 with sulfuric acid , and with 40 ml, of CW3 after adjusting its pH to 12 with...dissolved solids. Elemental and anionic analysis of the water solubles, shown in column 5 of table 3, indicated that nitrate, nitrite, silica and sulfate ...spectrophotometry revealed the presence of sulfate , nitrate, and nitrite. Atomic absorption showed an abnormal amount of sodium. Since this sample was reported at

  18. Graphical Arrays of Chemical-Specific Health Effect Reference Values for Inhalation Exposures (2009 Final Report)

    EPA Science Inventory

    This document provides graphical arrays and tables of key information on the derivation of human inhalation health effect reference values for specific chemicals, allowing comparisons across durations, populations, and intended use. A number of program offices within the Agency, ...

  19. Records for conversion of laser energy to nuclear energy in exploding nanostructures

    NASA Astrophysics Data System (ADS)

    Jortner, Joshua; Last, Isidore

    2017-09-01

    Table-top nuclear fusion reactions in the chemical physics laboratory can be driven by high-energy dynamics of Coulomb exploding, multicharged, deuterium containing nanostructures generated by ultraintense, femtosecond, near-infrared laser pulses. Theoretical-computational studies of table-top laser-driven nuclear fusion of high-energy (up to 15 MeV) deuterons with 7Li, 6Li and D nuclei demonstrate the attainment of high fusion yields within a source-target reaction design, which constitutes the highest table-top fusion efficiencies obtained up to date. The conversion efficiency of laser energy to nuclear energy (0.1-1.0%) for table-top fusion is comparable to that for DT fusion currently accomplished for 'big science' inertial fusion setups.

  20. 40 CFR Table A-1 to Subpart A of... - Global Warming Potentials

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Global Warming Potentials A Table A-1... A-1 to Subpart A of Part 98—Global Warming Potentials [100-Year Time Horizon] Name CAS No. Chemical formula Global warming potential(100 yr.) Carbon dioxide 124-38-9 CO2 1 Methane 74-82-8 CH4 21 Nitrous...

  1. 40 CFR Table A-1 to Subpart A of... - Global Warming Potentials

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 21 2011-07-01 2011-07-01 false Global Warming Potentials A Table A-1... A-1 to Subpart A of Part 98—Global Warming Potentials [100-Year Time Horizon] Name CAS No. Chemical formula Global warming potential(100 yr.) Carbon dioxide 124-38-9 CO2 1 Methane 74-82-8 CH4 21 Nitrous...

  2. A nuclear chocolate box: the periodic table of nuclear medicine.

    PubMed

    Blower, Philip J

    2015-03-21

    Radioisotopes of elements from all parts of the periodic table find both clinical and research applications in radionuclide molecular imaging and therapy (nuclear medicine). This article provides an overview of these applications in relation to both the radiological properties of the radionuclides and the chemical properties of the elements, indicating past successes, current applications and future opportunities and challenges for inorganic chemistry.

  3. 40 CFR Table 5 to Part 455 - BAT and NSPS Effluent Limitations for Priority Pollutants for Direct Discharge Point Sources That...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 30 2011-07-01 2011-07-01 false BAT and NSPS Effluent Limitations for Priority Pollutants for Direct Discharge Point Sources That Do Not Use End-of-Pipe Biological Treatment 5 Table 5 to Part 455 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PESTICIDE CHEMICALS...

  4. 40 CFR Table 5 to Part 455 - BAT and NSPS Effluent Limitations for Priority Pollutants for Direct Discharge Point Sources That...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false BAT and NSPS Effluent Limitations for Priority Pollutants for Direct Discharge Point Sources That Do Not Use End-of-Pipe Biological Treatment 5 Table 5 to Part 455 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PESTICIDE CHEMICALS...

  5. 40 CFR Table A-1 to Subpart A of... - Global Warming Potentials

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 22 2012-07-01 2012-07-01 false Global Warming Potentials A Table A-1... A-1 to Subpart A of Part 98—Global Warming Potentials [100-Year Time Horizon] Name CAS No. Chemical formula Global warming potential(100 yr.) Carbon dioxide 124-38-9 CO2 1 Methane 74-82-8 CH4 21 Nitrous...

  6. Elements in the history of the Periodic Table.

    PubMed

    Rouvray, Dennis H

    2004-06-01

    Discovery of the Periodic Table was rendered possible only after four decisive prerequisites had been achieved. These were (i) the abandonment of the metaphysical and occult notions of elements that typified the alchemical era; (ii) the adoption of a modern and workable definition of an element; (iii) the development of analytical chemical techniques for the isolation of the elements and determination of their properties; and (iv) the devising of a means of associating each element with a characteristic natural number. The Periodic Table made its appearance on cue almost as soon as these preconditions had been fulfilled.

  7. Field and laboratory data describing physical and chemical characteristics of metal-contaminated flood-plain deposits downstream from Lead, west-central South Dakota

    USGS Publications Warehouse

    Marron, D.C.

    1988-01-01

    Samples from metal-contaminated flood-plain sediments at 9 sites downstream from Lead, in west-central South Dakota, were collected during the summers of 1985-87 to characterize aspects of the sedimentology, chemistry, and geometry of a deposit that resulted from the discharge of a large volume of mining wastes into a river system. Field and laboratory data include stratigraphic descriptions, chemical contents and grain-size distributions of samples, and surveyed flood-plain positions of samples. This report describes sampling-site locations, and methods of sample collection and preservation, and subsequent laboratory analysis. Field and laboratory data are presented in 4 figures and 11 tables in the ' Supplemental Data ' section at the back of the report. (USGS)

  8. Effect of cow manure and empty fruit bunches application treated with different fertilizers on growth and yield of chili (Capsicum annum)

    NASA Astrophysics Data System (ADS)

    Ghazali, Mohd Rashdan; Mutalib, Sahilah Abd.; Abdullah, Aminah

    2016-11-01

    Study on the comparison of cow manure (CM) and empty fruit bunches (EFB) compost application as planting medium was conducted using four different treatments of fertilizer (without fertilizer, chemical fertilizer, organic fertilizer, and both fertilizer) on growth and yield of chili (Capsicum annum). The experiment started on August until December 2014 which consisted of eight treatments and were laid in a completely randomized block design (CRBD) with three replications. Variety chili that was used was Cilibangi 3. The seed was planted inside the tray for one week and transferred into the polybag containing growth media consisted of soil, compost (CM or EFB compost) and sand with ratio 3:2:1. Treatments without fertilizer were acted as a control. Throughout the study, plant growth performance and yield were recorded. The highest height of the plants for CM compost was 100.8 cm using chemical fertilizer and have significant different between the groups. For EFB compost was 92.7 cm using also chemical fertilizer but no significant different between the groups. The highest fruits weight per plant for CM compost was 485.67 g treated with both fertilizers and for EFB compost was 420.17 g treated with chemical fertilizer. Analysis of variance (ANOVA) table stated that fruits weight per plant has significant different for both planting medium with the fertilizer treatment. For the highest total fruits per plant, CM compost recorded about average 55 fruits per plant using both fertilizers and EFB compost recorded around 45 fruit per plant using chemical fertilizer. There was significantly different for total fruits per plant for both planting medium with the fertilizer treatment according to the ANOVA table. For CM, the ripening time was around 102-112 days and for EFB compost was around 96-110 days. Thus, application of CM compost treated with both chemical and organic fertilizers demonstrated better growth and fruit yield. While EFB compost was better growth and fruit yield when treated with chemical fertilizer.

  9. 40 CFR Table 5 to Subpart Jjjjj of... - Continuous Compliance With Emission Limits and Operating Limits

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... system, or other system; recording all monitor or sensor output, and if lime is found not to be free... chemicals are added to the scrubber water, collecting the scrubber chemical feed rate data according to § 63.8450(a); reducing the scrubber chemical feed rate data to 3-hour block averages according to § 63.8450...

  10. 40 CFR Table 5 to Subpart Jjjjj of... - Continuous Compliance With Emission Limits and Operating Limits

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... system, or other system; recording all monitor or sensor output, and if lime is found not to be free... chemicals are added to the scrubber water, collecting the scrubber chemical feed rate data according to § 63.8450(a); reducing the scrubber chemical feed rate data to 3-hour block averages according to § 63.8450...

  11. 40 CFR Table 5 to Subpart Jjjjj of... - Continuous Compliance With Emission Limits and Operating Limits

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... system, or other system; recording all monitor or sensor output, and if lime is found not to be free... chemicals are added to the scrubber water, collecting the scrubber chemical feed rate data according to § 63.8450(a); reducing the scrubber chemical feed rate data to 3-hour block averages according to § 63.8450...

  12. 40 CFR 423.17 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... discharged in chemical metal cleaning wastes shall not exceed the concentration listed in the following table... chemicals added for cooling tower maintenance, except: Chromium, total 0.2 Zinc, total 1.0 (2) At the... engineering calculations which demonstrate that the regulated pollutants are not detectable in the final...

  13. 40 CFR 423.17 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... discharged in chemical metal cleaning wastes shall not exceed the concentration listed in the following table... chemicals added for cooling tower maintenance, except: Chromium, total 0.2 Zinc, total 1.0 (2) At the... engineering calculations which demonstrate that the regulated pollutants are not detectable in the final...

  14. 40 CFR 423.17 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... discharged in chemical metal cleaning wastes shall not exceed the concentration listed in the following table... chemicals added for cooling tower maintenance, except: Chromium, total 0.2 Zinc, total 1.0 (2) At the... engineering calculations which demonstrate that the regulated pollutants are not detectable in the final...

  15. 40 CFR 423.17 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... discharged in chemical metal cleaning wastes shall not exceed the concentration listed in the following table... chemicals added for cooling tower maintenance, except: Chromium, total 0.2 Zinc, total 1.0 (2) At the... engineering calculations which demonstrate that the regulated pollutants are not detectable in the final...

  16. 40 CFR 423.17 - Pretreatment standards for new sources (PSNS).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... discharged in chemical metal cleaning wastes shall not exceed the concentration listed in the following table... chemicals added for cooling tower maintenance, except: Chromium, total 0.2 Zinc, total 1.0 (2) At the... engineering calculations which demonstrate that the regulated pollutants are not detectable in the final...

  17. 46 CFR 16.230 - Random testing requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... programs for the chemical testing for dangerous drugs on a random basis of crewmembers on inspected vessels... establish programs for the chemical testing for dangerous drugs on a random basis of crewmembers on... random drug testing shall be made by a scientifically valid method, such as a random number table or a...

  18. 46 CFR 16.230 - Random testing requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... programs for the chemical testing for dangerous drugs on a random basis of crewmembers on inspected vessels... establish programs for the chemical testing for dangerous drugs on a random basis of crewmembers on... random drug testing shall be made by a scientifically valid method, such as a random number table or a...

  19. 46 CFR 16.230 - Random testing requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... programs for the chemical testing for dangerous drugs on a random basis of crewmembers on inspected vessels... establish programs for the chemical testing for dangerous drugs on a random basis of crewmembers on... random drug testing shall be made by a scientifically valid method, such as a random number table or a...

  20. 46 CFR 16.230 - Random testing requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... programs for the chemical testing for dangerous drugs on a random basis of crewmembers on inspected vessels... establish programs for the chemical testing for dangerous drugs on a random basis of crewmembers on... random drug testing shall be made by a scientifically valid method, such as a random number table or a...

  1. 46 CFR 16.230 - Random testing requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... programs for the chemical testing for dangerous drugs on a random basis of crewmembers on inspected vessels... establish programs for the chemical testing for dangerous drugs on a random basis of crewmembers on... random drug testing shall be made by a scientifically valid method, such as a random number table or a...

  2. January 1998 Volume II 1996 Field Investigation Report Ecological Risk Assessment of the Marsh Area of the LCP Chemical Site in Brunswick, Georgia

    EPA Pesticide Factsheets

    Volume II contains the data tables and quality assurance review summaries cited in Volume I of the Ecological Risk Assessment for the Marsh (Estuarine) Operable Unit of the LCP Chemicals Site in Brunswick, Georgia.

  3. 40 CFR Table 1 to Subpart F of... - Synthetic Organic Chemical Manufacturing Industry Chemicals

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... III Ethylcellulose 9004573 V Ethylcyanoacetate 105566 V Ethylene carbonate 96491 I Ethylene dibromide (Dibromoethane) 106934 I Ethylene glycol 107211 I Ethylene glycol diacetate 111557 I Ethylene glycol dibutyl ether 112481 V Ethylene glycol diethyl ether 629141 I (1,2-diethoxyethane). Ethylene glycol 110714 I...

  4. Thermodynamic database for the Co-Pr system.

    PubMed

    Zhou, S H; Kramer, M J; Meng, F Q; McCallum, R W; Ott, R T

    2016-03-01

    In this article, we describe data on (1) compositions for both as-cast and heat treated specimens were summarized in Table 1; (2) the determined enthalpy of mixing of liquid phase is listed in Table 2; (3) thermodynamic database of the Co-Pr system in TDB format for the research articled entitle Chemical partitioning for the Co-Pr system: First-principles, experiments and energetic calculations to investigate the hard magnetic phase W.

  5. Thermodynamic database for the Co-Pr system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhou, S. H.; Kramer, M. J.; Meng, F. Q.

    2016-01-21

    In this article, we describe data on (1) compositions for both as-cast and heat treated specimens were summarized in Table 1; (2) the determined enthalpy of mixing of liquid phase is listed in Table 2; (3) thermodynamic database of the Co-Pr system in TDB format for the research articled entitle Chemical partitioning for the Co-Pr system: First-principles, experiments and energetic calculations to investigate the hard magnetic phase W.

  6. Thermodynamic database for the Co-Pr system

    DOE PAGES

    Zhou, S. H.; Kramer, M. J.; Meng, F. Q.; ...

    2016-03-01

    In this article, we describe data on (1) compositions for both as-cast and heat treated specimens were summarized in Table 1; (2) the determined enthalpy of mixing of liquid phase is listed in Table 2; (3) thermodynamic database of the Co-Pr system in TDB format for the research articled entitled ''Chemical partitioning for the Co-Pr system: First-principles, experiments and energetic calculations to investigate the hard magnetic phase W.''

  7. Science of Ball Lightning (Fire Ball)

    NASA Astrophysics Data System (ADS)

    Ohtsuki, Yoshi-Hiko

    1989-08-01

    The Table of Contents for the full book PDF is as follows: * Organizing Committee * Preface * Ball Lightning -- The Continuing Challenge * Hungarian Ball Lightning Observations in 1987 * Nature of Ball Lightning in Japan * Phenomenological and Psychological Analysis of 150 Austrian Ball Lightning Reports * Physical Problems and Physical Properties of Ball Lightning * Statistical Analysis of the Ball Lightning Properties * A Fluid-Dynamical Model for Ball Lightning and Bead Lightning * The Lifetime of Hill's Vortex * Electrical and Radiative Properties of Ball Lightning * The Candle Flame as a Model of Ball Lightning * A Model for Ball Lightning * The High-Temperature Physico-Chemical Processes in the Lightning Storm Atmosphere (A Physico-Chemical Model of Ball Lightning) * New Approach to Ball Lightning * A Calculation of Electric Field of Ball Lightning * The Physical Explanation to the UFO over Xinjiang, Northern West China * Electric Reconnection, Critical Ionization Velocity, Ponderomotive Force, and Their Applications to Triggered and Ball Lightning * The PLASMAK™ Configuration and Ball Lightning * Experimental Research on Ball Lightning * Performance of High-Voltage Test Facility Designed for Investigation of Ball Lightning * List of Participants

  8. Double stratified radiative Jeffery magneto nanofluid flow along an inclined stretched cylinder with chemical reaction and slip condition

    NASA Astrophysics Data System (ADS)

    Ramzan, M.; Gul, Hina; Dong Chung, Jae

    2017-11-01

    A mathematical model is designed to deliberate the flow of an MHD Jeffery nanofluid past a vertically inclined stretched cylinder near a stagnation point. The flow analysis is performed in attendance of thermal radiation, mixed convection and chemical reaction. Influence of thermal and solutal stratification with slip boundary condition is also considered. Apposite transformations are engaged to convert the nonlinear partial differential equations to differential equations with high nonlinearity. Convergent series solutions of the problem are established via the renowned Homotopy Analysis Method (HAM). Graphical illustrations are plotted to depict the effects of prominent arising parameters against all involved distributions. Numerically erected tables of important physical parameters like Skin friction, Nusselt and Sherwood numbers are also give. Comparative studies (with a previously examined work) are also included to endorse our results. It is noticed that the thermal stratification parameter has diminishing effect on temperature distribution. Moreover, the velocity field is a snowballing and declining function of curvature and slip parameters respectively.

  9. Development of the table of initial isolation distances and protective action distances for the 2004 emergency response guidebook.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brown, D. F.; Freeman, W. A.; Carhart, R. A.

    2005-09-23

    This report provides technical documentation for values in the Table of Initial Isolation and Protective Action Distances (PADs) in the 2004 Emergency Response Guidebook (ERG2004). The objective for choosing the PADs specified in the ERG2004 is to balance the need to adequately protect the public from exposure to potentially harmful substances against the risks and expenses that could result from overreacting to a spill. To quantify this balance, a statistical approach is adopted, whereby the best available information is used to conduct an accident scenario analysis and develop a set of up to 1,000,000 hypothetical incidents. The set accounts formore » differences in containers types, incident types, accident severity (i.e., amounts released), locations, times of day, times of year, and meteorological conditions. Each scenario is analyzed using detailed emission rate and atmospheric dispersion models to calculate the downwind chemical concentrations from which a 'safe distance' is determined. The safe distance is defined as the distance downwind from the source at which the chemical concentration falls below health protection criteria. The American Industrial Hygiene Association's Emergency Response Planning Guideline Level 2 (ERPG-2) or equivalent is the health criteria used. The statistical sample of safe distance values for all incidents considered in the analysis are separated into four categories: small spill/daytime release, small spill/nighttime release, large spill/daytime release, and large spill/nighttime release. The 90th-percentile safe distance values for each of these groups became the PADs that appear in the ERG2004.« less

  10. Tile-Based Fisher-Ratio Software for Improved Feature Selection Analysis of Comprehensive Two-Dimensional Gas Chromatography Time-of-Flight Mass Spectrometry Data

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Marney, Luke C.; Siegler, William C.; Parsons, Brendon A.

    Two-dimensional (2D) gas chromatography coupled with time-of-flight mass spectrometry (GC × GC – TOFMS) is a highly capable instrumental platform that produces complex and information-rich multi-dimensional chemical data. The complex data can be overwhelming, especially when many samples (of various sample classes) are analyzed with multiple injections for each sample. Thus, the data must be analyzed in such a way to extract the most meaningful information. The pixel-based and peak table-based algorithmic use of Fisher ratios has been used successfully in the past to reduce the multi-dimensional data down to those chemical compounds that are changing between classes relative tomore » those that are not (i.e., chemical feature selection). We report on the initial development of a computationally fast novel tile-based Fisher-ratio software that addresses challenges due to 2D retention time misalignment without explicitly aligning the data, which is a problem for both pixel-based and peak table- based methods. Concurrently, the tile-based Fisher-ratio software maximizes the sensitivity contrast of true positives against a background of potential false positives and noise. To study this software, eight compounds, plus one internal standard, were spiked into diesel at various concentrations. The tile-based F-ratio software was able to discover all spiked analytes, within the complex diesel sample matrix with thousands of potential false positives, in each possible concentration comparison, even at the lowest absolute spiked analyte concentration ratio of 1.06.« less

  11. Propulsion

    ERIC Educational Resources Information Center

    Air and Space, 1978

    1978-01-01

    An introductory discussion of aircraft propulsion is included along with diagrams and pictures of piston, turbojet, turboprop, turbofan, and jet engines. Also, a table on chemical propulsion is included. (MDR)

  12. Lookup Tables Versus Stacked Rasch Analysis in Comparing Pre- and Postintervention Adult Strabismus-20 Data.

    PubMed

    Leske, David A; Hatt, Sarah R; Liebermann, Laura; Holmes, Jonathan M

    2016-02-01

    We compare two methods of analysis for Rasch scoring pre- to postintervention data: Rasch lookup table versus de novo stacked Rasch analysis using the Adult Strabismus-20 (AS-20). One hundred forty-seven subjects completed the AS-20 questionnaire prior to surgery and 6 weeks postoperatively. Subjects were classified 6 weeks postoperatively as "success," "partial success," or "failure" based on angle and diplopia status. Postoperative change in AS-20 scores was compared for all four AS-20 domains (self-perception, interactions, reading function, and general function) overall and by success status using two methods: (1) applying historical Rasch threshold measures from lookup tables and (2) performing a stacked de novo Rasch analysis. Change was assessed by analyzing effect size, improvement exceeding 95% limits of agreement (LOA), and score distributions. Effect sizes were similar for all AS-20 domains whether obtained from lookup tables or stacked analysis. Similar proportions exceeded 95% LOAs using lookup tables versus stacked analysis. Improvement in median score was observed for all AS-20 domains using lookup tables and stacked analysis ( P < 0.0001 for all comparisons). The Rasch-scored AS-20 is a responsive and valid instrument designed to measure strabismus-specific health-related quality of life. When analyzing pre- to postoperative change in AS-20 scores, Rasch lookup tables and de novo stacked Rasch analysis yield essentially the same results. We describe a practical application of lookup tables, allowing the clinician or researcher to score the Rasch-calibrated AS-20 questionnaire without specialized software.

  13. Lookup Tables Versus Stacked Rasch Analysis in Comparing Pre- and Postintervention Adult Strabismus-20 Data

    PubMed Central

    Leske, David A.; Hatt, Sarah R.; Liebermann, Laura; Holmes, Jonathan M.

    2016-01-01

    Purpose We compare two methods of analysis for Rasch scoring pre- to postintervention data: Rasch lookup table versus de novo stacked Rasch analysis using the Adult Strabismus-20 (AS-20). Methods One hundred forty-seven subjects completed the AS-20 questionnaire prior to surgery and 6 weeks postoperatively. Subjects were classified 6 weeks postoperatively as “success,” “partial success,” or “failure” based on angle and diplopia status. Postoperative change in AS-20 scores was compared for all four AS-20 domains (self-perception, interactions, reading function, and general function) overall and by success status using two methods: (1) applying historical Rasch threshold measures from lookup tables and (2) performing a stacked de novo Rasch analysis. Change was assessed by analyzing effect size, improvement exceeding 95% limits of agreement (LOA), and score distributions. Results Effect sizes were similar for all AS-20 domains whether obtained from lookup tables or stacked analysis. Similar proportions exceeded 95% LOAs using lookup tables versus stacked analysis. Improvement in median score was observed for all AS-20 domains using lookup tables and stacked analysis (P < 0.0001 for all comparisons). Conclusions The Rasch-scored AS-20 is a responsive and valid instrument designed to measure strabismus-specific health-related quality of life. When analyzing pre- to postoperative change in AS-20 scores, Rasch lookup tables and de novo stacked Rasch analysis yield essentially the same results. Translational Relevance We describe a practical application of lookup tables, allowing the clinician or researcher to score the Rasch-calibrated AS-20 questionnaire without specialized software. PMID:26933524

  14. Development of an Expanded, High Reliability Cost and Performance Database for In Situ Remediation Technologies

    DTIC Science & Technology

    2016-03-01

    Performance Metrics University of Waterloo Permanganate Treatment of an Emplaced DNAPL Source (Thomson et al., 2007) Table 5.6 Remediation Performance Data... permanganate vs. peroxide/Fenton’s for chemical oxidation).  Poorer performance was generally observed when the Total CVOC was the contaminant metric...using a soluble carbon substrate (lactate), chemical oxidation using Fenton’s reagent, and chemical oxidation using potassium permanganate . At

  15. Toxics Release Inventory Chemical Hazard Information Profiles (TRI-CHIP) Dataset

    EPA Pesticide Factsheets

    The Toxics Release Inventory (TRI) Chemical Hazard Information Profiles (TRI-CHIP) dataset contains hazard information about the chemicals reported in TRI. Users can use this XML-format dataset to create their own databases and hazard analyses of TRI chemicals. The hazard information is compiled from a series of authoritative sources including the Integrated Risk Information System (IRIS). The dataset is provided as a downloadable .zip file that when extracted provides XML files and schemas for the hazard information tables.

  16. Online Data Resources in Chemical Engineering Education: Impact of the Uncertainty Concept for Thermophysical Properties

    ERIC Educational Resources Information Center

    Kim, Sun Hyung; Kang, Jeong Won; Kroenlein, Kenneth; Magee, Joseph W.; Diky, Vladimir; Muzny, Chris D.; Kazakov, Andrei F.; Chirico, Robert D.; Frenkel, Michael

    2013-01-01

    We review the concept of uncertainty for thermophysical properties and its critical impact for engineering applications in the core courses of chemical engineering education. To facilitate the translation of developments to engineering education, we employ NIST Web Thermo Tables to furnish properties data with their associated expanded…

  17. The Periodic Pyramid

    ERIC Educational Resources Information Center

    Hennigan, Jennifer N.; Grubbs, W. Tandy

    2013-01-01

    The chemical elements present in the modern periodic table are arranged in terms of atomic numbers and chemical periodicity. Periodicity arises from quantum mechanical limitations on how many electrons can occupy various shells and subshells of an atom. The shell model of the atom predicts that a maximum of 2, 8, 18, and 32 electrons can occupy…

  18. 40 CFR Table 2 of Subpart Bbbbbbb... - Initial Compliance Demonstration Methods With the Emission Reduction and PM Concentration...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Emission Standards for Hazardous Air Pollutants for Area Sources: Chemical Preparations Industry Other... less; or c. Provide engineering calculations, such as mass balance and flow rate calculations, that demonstrate that the control device is capable of reducing PM concentration from the chemical preparations...

  19. 40 CFR Table 2 of Subpart Bbbbbbb... - Initial Compliance Demonstration Methods With the Emission Reduction and PM Concentration...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Emission Standards for Hazardous Air Pollutants for Area Sources: Chemical Preparations Industry Other... less; or c. Provide engineering calculations, such as mass balance and flow rate calculations, that demonstrate that the control device is capable of reducing PM concentration from the chemical preparations...

  20. 40 CFR Table 2 of Subpart Bbbbbbb... - Initial Compliance Demonstration Methods With the Emission Reduction and PM Concentration...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Emission Standards for Hazardous Air Pollutants for Area Sources: Chemical Preparations Industry Other... less; or c. Provide engineering calculations, such as mass balance and flow rate calculations, that demonstrate that the control device is capable of reducing PM concentration from the chemical preparations...

  1. 40 CFR Table 2 of Subpart Bbbbbbb... - Initial Compliance Demonstration Methods With the Emission Reduction and PM Concentration...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Emission Standards for Hazardous Air Pollutants for Area Sources: Chemical Preparations Industry Other... less; or c. Provide engineering calculations, such as mass balance and flow rate calculations, that demonstrate that the control device is capable of reducing PM concentration from the chemical preparations...

  2. 40 CFR Table 2 of Subpart Bbbbbbb... - Initial Compliance Demonstration Methods With the Emission Reduction and PM Concentration...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Emission Standards for Hazardous Air Pollutants for Area Sources: Chemical Preparations Industry Other... less; or c. Provide engineering calculations, such as mass balance and flow rate calculations, that demonstrate that the control device is capable of reducing PM concentration from the chemical preparations...

  3. Chemical analyses and K-Ar ages of samples from 13 drill holes, Medicine Lake volcano, California

    USGS Publications Warehouse

    Donnelly-Nolan, Julie M.

    2006-01-01

    Chemical analyses and K-Ar ages are presented for rocks sampled from drill holes at Medicine Lake volcano, northern California. A location map and a cross-section are included, as are separate tables for drill hole information, major and trace element data, and for K-Ar dates.

  4. 40 CFR Table 4 of Subpart Bbbbbbb... - Continuous Compliance Demonstration Methods With the Emission Reduction and PM Concentration...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... chemical preparations operation was in target HAP service. The control device monitoring data are averaged... Emission Standards for Hazardous Air Pollutants for Area Sources: Chemical Preparations Industry Other... particulate matter control device being used. c. A CPMS, and maintaining records of data verifying that the...

  5. Tables showing analyses of semiquantitative spectrometry and atomic-absorption spectrophotometry of rock samples collected in the Ugashik, Bristol Bay, and western part of the Karluk quadrangles, Alaska

    USGS Publications Warehouse

    Wilson, Frederic H.; O'Leary, Richard M.

    1987-01-01

    The accompanying tables list chemical analyses of 337 rock samples that were collected in 1979, 1980, and 1981 in conjunction with geologic mapping in the Ugashik, Bristol Bay, and part of Karluk quadrangles. This work was conducted under the auspices of the Alaska Mineral Resource Assessment Program (AMRAP). This report is to accompany Wilson and O'Leary (1986) which inadvertently is missing most of the data tables listed here. Together the two reports contain the complete data from all samples collected for the Ugashik AMRAP.

  6. Integrated Data Collection Analysis (IDCA) Program - Mixing Procedures and Materials Compatibility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Olinger, Becky D.; Sandstrom, Mary M.; Warner, Kirstin F.

    Three mixing procedures have been standardized for the IDCA proficiency test—solid-solid, solid-liquid, and liquid-liquid. Due to the variety of precursors used in formulating the materials for the test, these three mixing methods have been designed to address all combinations of materials. Hand mixing is recommended for quantities less than 10 grams and Jar Mill mixing is recommended for quantities over 10 grams. Consideration must also be given to the type of container used for the mixing due to the wide range of chemical reactivity of the precursors and mixtures. Eight web site sources from container and chemical manufacturers have beenmore » consulted. Compatible materials have been compiled as a resource for selecting containers made of materials stable to the mixtures. In addition, container materials used in practice by the participating laboratories are discussed. Consulting chemical compatibility tables is highly recommended for each operation by each individual engaged in testing the materials in this proficiency test.« less

  7. Efficient first-principles prediction of solid stability: Towards chemical accuracy

    DOE PAGES

    Zhang, Yubo; Kitchaev, Daniil A.; Yang, Julia; ...

    2018-03-09

    The question of material stability is of fundamental importance to any analysis of system properties in condensed matter physics and materials science. The ability to evaluate chemical stability, i.e., whether a stoichiometry will persist in some chemical environment, and structure selection, i.e. what crystal structure a stoichiometry will adopt, is critical to the prediction of materials synthesis, reactivity and properties. In this paper, we demonstrate that density functional theory, with the recently developed strongly constrained and appropriately normed (SCAN) functional, has advanced to a point where both facets of the stability problem can be reliably and efficiently predicted for mainmore » group compounds, while transition metal compounds are improved but remain a challenge. SCAN therefore offers a robust model for a significant portion of the periodic table, presenting an opportunity for the development of novel materials and the study of fine phase transformations even in largely unexplored systems with little to no experimental data.« less

  8. Efficient first-principles prediction of solid stability: Towards chemical accuracy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, Yubo; Kitchaev, Daniil A.; Yang, Julia

    The question of material stability is of fundamental importance to any analysis of system properties in condensed matter physics and materials science. The ability to evaluate chemical stability, i.e., whether a stoichiometry will persist in some chemical environment, and structure selection, i.e. what crystal structure a stoichiometry will adopt, is critical to the prediction of materials synthesis, reactivity and properties. In this paper, we demonstrate that density functional theory, with the recently developed strongly constrained and appropriately normed (SCAN) functional, has advanced to a point where both facets of the stability problem can be reliably and efficiently predicted for mainmore » group compounds, while transition metal compounds are improved but remain a challenge. SCAN therefore offers a robust model for a significant portion of the periodic table, presenting an opportunity for the development of novel materials and the study of fine phase transformations even in largely unexplored systems with little to no experimental data.« less

  9. Selected Physical, Chemical, and Biological Data for 30 Urbanizing Streams in the North Carolina Piedmont Ecoregion, 2002-2003

    USGS Publications Warehouse

    Giddings, E.M.; Moorman, Michelle; Cuffney, Thomas F.; McMahon, Gerard; Harned, Douglas A.

    2007-01-01

    This report provides summarized physical, chemical, and biological data collected during a study of the effects of urbanization on stream ecosystems as part of the U.S. Geological Survey's National Water-Quality Assessment study. The purpose of this study was to examine differences in biological, chemical, and physical characteristics of streams across a gradient of urban intensity. Thirty sites were selected along an urbanization gradient that represents conditions in the North Carolina Piedmont ecoregion, including the cities of Raleigh, Durham, Cary, Greensboro, Winston-Salem, High Point, Asheboro, and Oxford. Data collected included streamflow variability, stream temperature, instream chemistry, instream aquatic habitat, and collections of the algal, macroinvertebrate, and fish communities. In addition, ancillary data describing land use, socioeconomic conditions, and urban infrastructure were compiled for each basin using a geographic information system analysis. All data were processed and summarized for analytical use and are presented in downloadable data tables, along with the methods of data collection and processing.

  10. Probing Subsurface and Stream Particle Composition Through Optical Analysis at the Eel River Critical Zone Observatory

    NASA Astrophysics Data System (ADS)

    Nghiem, A.; Thurnhoffer, B. M.; Bishop, J. K. B.; Kim, H.

    2014-12-01

    Particles constitute a significant portion of the flux weathered material from continents to ocean basins but little is understood about their seasonal dynamics particularly in subsurface and headwater stream environments. At the Eel River Critical Zone Observatory, located near the headwaters of the South Fork Eel River in the Angelo Coast Range Reserve (Northern California), groundwater from weathered bedrock and stream waters are sampled at a frequency of one to three days from three wells (Well 1 down-slope, Well 3 mid-slope, Well 10 upper-slope) and Elder Creek. Approximately one thousand samples collected by automated ISCO Gravity Filtration System (GFS; Kim et al. 2012, EST) since 2011 have been filtered through 0.45 μm 25 mm diameter Supor filters. Filters imaged under controlled lighting are analyzed for red, green, and blue optical density (OD) to enable rapid assessment of sample loading and color as a prelude to and selection aid for more labor-intensive ICP-MS and Scanning Electron Microscopic analysis. For example, samples with lower red OD relative to green and blue may correspond to samples high in Mn/Fe oxides. Optical imaging of the loaded filters provides a time-series over three years and color anomalies in these filters along with chemical analysis of dissolved and particulate filtrate is used to establish a method for calibrating optical data to interpret chemical composition of water and particles. Results are interpreted within a framework of environmental data such as rainfall, stream discharge and turbidity, and water table depth measured at the heavily monitored forested hillslope. Data from the four locations range up to 0.6 OD units with a typical detection limit of better than 0.01 OD units. At Well 10, wet season filter samples exhibit highest particle loading (OD ~ 0.3) with values rapidly decreasing during the dry season (OD < D.L.) water table recession. At Well 1, particle loads instantaneously reflect intense rain events. Applied at a larger scale, this method - if proven - may be used to estimate basin level particulate flux with an estimation of chemical composition in a highly efficient manner.

  11. Table of periodic properties of fullerenes based on structural parameters.

    PubMed

    Torrens, Francisco

    2004-01-01

    The periodic table (PT) of the elements suggests that hydrogen could be the origin of everything else. The construction principle is an evolutionary process that is formally similar to those of Darwin and Oparin. The Kekulé structure count and permanence of the adjacency matrix of fullerenes are related to structural parameters involving the presence of contiguous pentagons p, q and r. Let p be the number of edges common to two pentagons, q the number of vertices common to three pentagons, and r the number of pairs of nonadjacent pentagon edges shared between two other pentagons. Principal component analysis (PCA) of the structural parameters and cluster analysis (CA) of the fullerenes permit classifying them and agree. A PT of the fullerenes is built based on the structural parameters, PCA and CA. The periodic law does not have the rank of the laws of physics. (1) The properties of the fullerenes are not repeated; only, and perhaps, their chemical character. (2) The order relationships are repeated, although with exceptions. The proposed statement is the following: The relationships that any fullerene p has with its neighbor p + 1 are approximately repeated for each period.

  12. Investigating the mechanisms of shale porosity development to understand hydrologic controls on hillslope scale weathering in a comparison across CZOs

    NASA Astrophysics Data System (ADS)

    Gu, X.; Rempe, D.; Brantley, S. L.

    2016-12-01

    The spatial distribution of weathered rock across actively eroding landscapes strongly influences how water and solutes are routed throughout the landscape. To understand the controls on the evolution of weathering profiles that underlie hilly and mountainous regions, we investigated the porosity formation and chemical weathering of shale (Coastal Belt of the Franciscan Formation) samples from four boreholes at Eel River Critical Zone Observatory (ERCZO) in Northern California. We further compared the characteristics of the shale at ERCZO to the well studied Rose Hill shale at Susquehanna Shale Hills Critical Zone Observatory (SSHCZO) in central Pennsylvania. These two sites have similar mineralogical composition, but are located in vastly different climate and tectonic settings. In particular, the erosion rate at ERCZO (0.2-0.4 mm/yr) is much faster than at SSHCZO (0.015 mm/yr), and the average annual precipitation at ERCZO is higher (1.7 m/yr vs. 1 m/yr at SSHCZO). However, neutron scattering experiments show nearly identical bedrock porosities (3.1-4.6%) of parent rock. Analysis of the chemical and mineralogical compositions of samples throughout the weathering profile reveal that, at both sites, chemical weathering reactions occur at similar depths despite large differences in erosion rate: 1) carbonate and pyrite deplete sharply near the water table. 2) Chlorite oxidation also initiates near water table but shows a wider reaction front. 3) Illite dissolution occurs near the land surface. In both settings, the interface between weathered and unweathered rock roughly coincides with the water table and the porosity and water-accessibility increase toward the land surface. However, at ERCZO, the porosity and the density of micro-fractures are higher in the weathered zone than observed at SSHCZO. It is possible that both sites are moving toward a balance between rates of erosion and weathering advance, and that higher density of microfractures at the rapidly eroding ERCZO promotes faster water infiltration and faster weathering advance relative to the more slowly eroding SSHCZO. Further investigation of the origin and role of these microfractures is needed to understand the interplay between climate, erosion, and weathering that controls hillslope weathering profiles.

  13. 31 CFR 549.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. ...

  14. 31 CFR 548.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. ...

  15. 31 CFR 549.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. ...

  16. 31 CFR 548.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. ...

  17. 31 CFR 537.327 - Financial, material, or technological support.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. ...

  18. 31 CFR 548.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. ...

  19. 31 CFR 548.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. ...

  20. 31 CFR 549.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. ...

  1. 31 CFR 548.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. ...

  2. 31 CFR 549.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. ...

  3. TSP Symposium 2012 Proceedings

    DTIC Science & Technology

    2012-11-01

    and Statistical Model 78 7.3 Analysis and Results 79 7.4 Threats to Validity and Limitations 85 7.5 Conclusions 86 7.6 Acknowledgments 87 7.7...Table 12: Overall Statistics of the Experiment 32 Table 13: Results of Pairwise ANOVA Analysis, Highlighting Statistically Significant Differences...we calculated the percentage of defects injected. The distribution statistics are shown in Table 2. Table 2: Mean Lower, Upper Confidence Interval

  4. Finite-Rate Ablation Boundary Conditions for Carbon-Phenolic Heat-Shield

    NASA Technical Reports Server (NTRS)

    Chen, Y.-K.; Milos, Frank S.

    2003-01-01

    A formulation of finite-rate ablation surface boundary conditions, including oxidation, nitridation, and sublimation of carbonaceous material with pyrolysis gas injection, has been developed based on surface species mass conservation. These surface boundary conditions are discretized and integrated with a Navier-Stokes solver. This numerical procedure can predict aerothermal heating, chemical species concentration, and carbonaceous material ablation rate over the heatshield surface of re-entry space vehicles. In this study, the gas-gas and gas-surface interactions are established for air flow over a carbon-phenolic heatshield. Two finite-rate gas-surface interaction models are considered in the present study. The first model is based on the work of Park, and the second model includes the kinetics suggested by Zhluktov and Abe. Nineteen gas phase chemical reactions and four gas-surface interactions are considered in the present model. There is a total of fourteen gas phase chemical species, including five species for air and nine species for ablation products. Three test cases are studied in this paper. The first case is a graphite test model in the arc-jet stream; the second is a light weight Phenolic Impregnated Carbon Ablator at the Stardust re-entry peak heating conditions, and the third is a fully dense carbon-phenolic heatshield at the peak heating point of a proposed Mars Sample Return Earth Entry Vehicle. Predictions based on both finite-rate gas- surface interaction models are compared with those obtained using B' tables, which were created based on the chemical equilibrium assumption. Stagnation point convective heat fluxes predicted using Park's finite-rate model are far below those obtained from chemical equilibrium B' tables and Zhluktov's model. Recession predictions from Zhluktov's model are generally lower than those obtained from Park's model and chemical equilibrium B' tables. The effect of species mass diffusion on predicted ablation rate is also examined.

  5. Large eddy simulation/dynamic thickened flame modeling of a high Karlovitz number turbulent premixed jet flame (Supplementary material).

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Han, Wang; Wang, Haiou; Kuenne, Guido

    This supplementary material complements the article and provides additional information to the chemical mechanism used in this work, boundary conditions for the LES con guration and table generation, comparisons of axial velocities, results from a LES/ nite-rate chemistry (FRC) approach, and results from the LES/DTF/SPF approach with a particular chemistry table that is generated using a single strained premixed amelet solution.

  6. Partnerships: The Path to Improving Crisis Communication

    DTIC Science & Technology

    2007-03-01

    News Media Perceives Relationships with Public Safety.................32 Table 4. Public Safety SWOT Analysis ...opportunities and threats ( SWOT ) of the Seattle fire and police departments. The SWOT analysis is an assessment tool common to strategic planning for...requirements for training • Lack of strategic planning experience Table 4. Public Safety SWOT Analysis 46 Table 4 compares the strengths and

  7. Temporal correlation between dyke swarms and crustal extension in the middle Palaeozoic Vilyui rift basin, Siberian platform

    NASA Astrophysics Data System (ADS)

    Polyansky, Oleg P.; Prokopiev, Andrei V.; Koroleva, Olga V.; Tomshin, Mikhail D.; Reverdatto, Vladimir V.; Selyatitsky, Alexander Yu.; Travin, Alexei V.; Vasiliev, Dmitry A.

    2017-06-01

    This paper presents results from new 40Ar/39Ar isotope dating of nine mafic dykes from three large dyke swarms (Vilyui-Markha, Kontai-Dzherba, and Chara-Sinsk) of the Yakutsk-Vilyui large igneous province (LIP), in addition to a reconstruction of the subsidence history of the middle Palaeozoic Vilyui paleorift basin (eastern Siberian platform). All previously published 40Ar/39Ar and U-Pb dates are summarized. Statistical analysis of the dyke ages reveals repeated magmatic events in the study area. Two major pulses of mafic magmatism are identified: one at the Frasnian-Famennian boundary, with a main peak at ca. 374.1 Ma, and another in the latest Devonian with a peak at ca. 363.4 Ma. The time of maximum intensity of dyke intrusion coincides (within uncertainty) with rapid subsidence in the Vilyui basin. The minimum total volume of middle Palaeozoic magmatism produced in the Yakutsk-Vilyui LIP is 100-215 K km3, which is much less than earlier estimates. Most of the mafic material within the Yakutsk-Vilyui LIP is related to the Vilyui basin and associated dyke swarms. Backstripping analysis of sedimentation in depressions of the Vilyui basin was carried out. Estimates were obtained for the spatial distribution of the stretching factor of the crust and mantle lithosphere, averaging 1.17 and 1.44, respectively. The amount of extension due to dyke intrusion is estimated to be 6%. Backstripping analysis of sedimentation in the Vilyui basin was used to assess the effect of both intraplate far-field forces and upwelling magma flows initiated by a mantle plume. A numerical thermomechanical model was developed to investigate the relations between two possible mechanisms by which the Vilyui rift was initiated: intraplate extension (passive rifting) and the ascent of a mantle magmatic diapir (active rifting). A model considering both of these mechanisms shows the contribution of the far-field extension forces and the effect of convective flows around the mantle plume, assuming a temperature of 1500 °C for a heat source operating for ≥ 10 Myr. The best-fit model predicts the formation of the Vilyui basin under extensional conditions with a depth-integrated horizontal driving force of 2.0 × 1013 N/m, which corresponds to a lithostatic pressure of 0.73. Appendix B. Numerical model; Appendix C, Table S1. Major and trace element average data for reference materials W-1, JB-3 and internal standard ST-1A. Table S2. Laboratory precision (Diamond and Precious Metal Geology Institute, Siberian Branch of Russian Academy of Sciences). Table S3. Chemical composition of plagioclase from samples dated in this work. Table S4. Chemical composition of clinopyroxene from samples dated in this work.

  8. The multiple decrement life table: a unifying framework for cause-of-death analysis in ecology.

    PubMed

    Carey, James R

    1989-01-01

    The multiple decrement life table is used widely in the human actuarial literature and provides statistical expressions for mortality in three different forms: i) the life table from all causes-of-death combined; ii) the life table disaggregated into selected cause-of-death categories; and iii) the life table with particular causes and combinations of causes eliminated. The purpose of this paper is to introduce the multiple decrement life table to the ecological literature by applying the methods to published death-by-cause information on Rhagoletis pomonella. Interrelations between the current approach and conventional tools used in basic and applied ecology are discussed including the conventional life table, Key Factor Analysis and Abbott's Correction used in toxicological bioassay.

  9. Constituent bioconcentration in rainbow trout exposed to a complex chemical mixture

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Linder, G.; Bergman, H.L.; Meyer, J.S.

    1984-09-01

    Classically, aquatic contaminant fate models predicting a chemical's bioconcentration factor (BCF) are based upon single-compound derived models, yet such BCF predictions may deviate from observed BCFs when physicochemical interactions or biological responses to complex chemical mixture exposures are not adequately considered in the predictive model. Rainbow trout were exposed to oil-shale retort waters. Such a study was designed to model the potential biological effects precluded by exposure to complex chemical mixtures such as solid waste leachates, agricultural runoff, and industrial process waste waters. Chromatographic analysis of aqueous and nonaqueous liquid-liquid reservoir components yielded differences in mixed extraction solvent HPLC profilesmore » of whole fish exposed for 1 and 3 weeks to the highest dilution of the complex chemical mixture when compared to their corresponding control, yet subsequent whole fish extractions at 6, 9, 12, and 15 weeks into exposure demonstrated no qualitative differences between control and exposed fish. Liver extractions and deproteinized bile samples from exposed fish were qualitatively different than their corresponding controls. These findings support the projected NOEC of 0.0045% dilution, even though the differences in bioconcentration profiles suggest hazard assessment strategies may be useful in evaluating environmental fate processes associated with complex chemical mixtures. 12 references, 4 figures, 2 tables.« less

  10. 31 CFR 594.317 - Financial, material, or technological support.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... other transmission of value; weapons or related materiel; chemical or biological agents; explosives..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  11. 31 CFR 542.304 - Financial, material, or technological support.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... other transmission of value; weapons or related materiel; chemical or biological agents; explosives..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  12. 31 CFR 588.312 - Financial, material, or technological support.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... other transmission of value; weapons or related materiel; chemical or biological agents; explosives..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  13. 31 CFR 594.317 - Financial, material, or technological support.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... other transmission of value; weapons or related materiel; chemical or biological agents; explosives..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  14. 31 CFR 594.317 - Financial, material, or technological support.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... other transmission of value; weapons or related materiel; chemical or biological agents; explosives..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  15. 31 CFR 588.312 - Financial, material, or technological support.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... other transmission of value; weapons or related materiel; chemical or biological agents; explosives..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  16. 31 CFR 594.317 - Financial, material, or technological support.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... other transmission of value; weapons or related materiel; chemical or biological agents; explosives..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  17. 31 CFR 594.317 - Financial, material, or technological support.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... other transmission of value; weapons or related materiel; chemical or biological agents; explosives..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  18. 31 CFR 588.312 - Financial, material, or technological support.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... other transmission of value; weapons or related materiel; chemical or biological agents; explosives..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  19. 31 CFR 588.312 - Financial, material, or technological support.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... other transmission of value; weapons or related materiel; chemical or biological agents; explosives..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  20. Physical explanation of the periodic table.

    PubMed

    Ostrovsky, V N

    2003-05-01

    The Periodic Table of the elements, the most important generalization in chemistry, is often considered as a representative special case in the study of the relation between chemistry and physics. Its quantum interpretation was initiated, but not completed, by Niels Bohr. In this paper, post-Bohr conceptual developments are discussed from historical and epistemological points of view. The difference between high-precision numerical calculations for individual atoms and the theory of the periodic system as a whole is emphasized. Periodic laws met in Nature are not restricted to the chemical Periodic Table. A comparative study of these laws makes it possible to single out essential features that define the particular pattern of periodicity. It is shown that the periodic system of neutral ground state atoms now has a firm nonempirical quantum-theoretical basis. Alternative approaches, based on group theory and other mathematical schemes, are briefly discussed. It is argued that, while quantum theory is capable of fully accurate calculations for relatively simple atoms or molecular objects, the complexity of polyatomic molecules and chemical reactions guarantees the flourishing of chemistry as a separate scientific discipline.

  1. Zero-Kelvin Compression Isotherms of the Elements 1 ≤ Z ≤ 92 to 100 GPa

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Young, David A.; Cynn, Hyunchae; Söderlind, Per

    2016-12-01

    Most of the chemical elements have now been compressed close to or above 100 GPa (1 Mbar) pressure in diamond-anvil cells and the pressure–volume room-temperature isotherms have been measured. We collect these data and use simple lattice-dynamics models to reduce the isotherms to 0 K. We have extended the published work by making new diamond-anvil-cell measurements on Cr and Rh, and by conducting density-functional calculations on the elements Po, At, Rn, Fr, Ra, and Ac. The 0 K data are tabulated for all elements 1 ≤ Z ≤ 92 and 0 ≤ P ≤ 100 GPa. These data are usefulmore » for generating wide-range equation of state models and for studying the stability of chemical compounds at high pressure (“Megabar chemistry”). The tables presented here are intended to be reference thermodynamic tables for use in high-pressure research. Further experimental and theoretical work will be needed to extend the tables to higher pressure and to improve accuracy.« less

  2. Enhanced Preliminary Assessment Report: Kapalama Military Reservation, Honolulu, Hawaii

    DTIC Science & Technology

    1990-02-01

    Environmentally Significant Operations - Transformers 3-4 5-1 Recommended Sampling Methods 5-6 vii 1073M2-4 LIST OF TABLES Tabf lN. Title ES-1 ESOs...Phase III. ES-I 1073M2-4 ESOs identified on the property include: Buildings 913/914 - Mortuary - chemicals used in the embalming process. The chemicals...The chemicals stored here are associated with the examination and embalming procedures performed at the mortuary and include arterial fluids

  3. The Vaiont Slide. A Geotechnical Analysis Based on New Geologic Observations of the Failure Surface. Volume 2. Appendices A through G

    DTIC Science & Technology

    1985-06-01

    Al B , STATIC SLOPE ANALYSIS METHOD USED FOR THE WAONT SLIDE -ANALYSES~ty D. L. Anderson ................................... B1 C SECTIONS,,USED...years 1960, 1961, 1962 and 1963 are given in this appendix in Tables Al , A2, A3 and A4, respectively. These were supplied through the courtesy of E.N.E.L...Tables Table Al . Daily precipitation record, Erto - 1960 Table A2. Daily precipitation record, Erto - 1961 Table A3. Daily precipitation record, Erto

  4. Times and locations of explosions; U.S. Geological Survey 1962 field season

    USGS Publications Warehouse

    Roller, John C.

    1962-01-01

    The U.S. Geological Survey detonated 86 large charges of chemical explosives in the western United States from 6 June to 9 August 1962, in a study of crustal structure in the western United States. This Technical Letter consists of two tables containing information about these explosions. Table I gives a brief geographical description of the shotpoints, and Table II gives the date, time, location, charge size, surface elevation, and some general information about the shots. In the Remarks column (Table II), the configuration and depth of most of the charges are given. This part of the table is not complete, as some of this information has not yet been compiled. Three types of explosives were used in the program. These were: Nitramon WW, a carbo-nitrate blasting agent; Composition B, a mixture of RDX and TNT; and Tovex-Gel, a non-nitroglycerin blasting slurry. The loading, firing, and surveying was done by United ElectroDynamics, Inc., of Pasadena, California. The timing was done by the U.S. Geological Survey.

  5. Strategic Planning for Cardiac Services

    DTIC Science & Technology

    2008-04-13

    Support Delivery Strategies 38 8. Action Plan 40 CT Strategy Plan List of Tables Table 1. CT program SWOT analysis Table 2. Critical strengths and...activities will give an overview to form a thorough SWOT (strengths, weaknesses, opportunities and threats) analysis by uncovering crucial elements...Potential Strategies To understand potential strategies available to DDEAMC and Augusta VAMC, a SWOT analysis was completed to clearly identify

  6. Chemical food composition: implications for atherosclerosis prevention.

    PubMed

    Scherr, Carlos; Ribeiro, Jorge Pinto

    2011-01-01

    To compare the fatty acid and cholesterol content in food acquired in Brazil with the composition found in the most frequently used reference tables in the country. The fatty acid and cholesterol content in 41 food items frequently used in our country and the various directions to prepare them were reviewed by using specific methodology and the information was compared to the tables adopted by Unicamp and UNIFESP. According to Unicamp table, the cholesterol content found in parmesan cheese was 100.7 mg/100 g, while it was 68 mg/100 g in UNIFESP table, that is, a 48% (p < 0.05), higher content in the former. This study table found a cholesterol content 31% lower (94 mg/100 g vs. 123 mg/100 g, p < 0.05) for yellow cheese. For whole milk, we found a 52% difference regarding cholesterol content, while the difference for saturated fat ranged from 1.4 g/100 g in Unicamp table to 2.130 g/100 g in our study table (p < 0.05). For some food items, no statistically significant differences were found among the tables. However, when a 1,800-calorie diet was prescribed, the discrepancies among the tables and lack of information resulted in clinically relevant differences in dietary recommendations. There are important differences in food fat content between the fatty acid and cholesterol content formally analyzed and the content shown on commonly used tables, and this can compromise our recommendations on preventing atherosclerosis. One possible explanation for the differences would be the fact that the UNIFESP table is American in origin.

  7. 31 CFR 547.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., or any other transmission of value; weapons or related materiel; chemical or biological agents..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  8. 31 CFR 546.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...; weapons or related materiel; chemical or biological agents; explosives; false documentation or..., tables, engineering designs and specifications, manuals, or other recorded instructions. [77 FR 6465, Feb...

  9. 31 CFR 543.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. [77 FR...

  10. 31 CFR 546.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...; weapons or related materiel; chemical or biological agents; explosives; false documentation or..., tables, engineering designs and specifications, manuals, or other recorded instructions. [77 FR 6465, Feb...

  11. 31 CFR 546.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...; weapons or related materiel; chemical or biological agents; explosives; false documentation or..., tables, engineering designs and specifications, manuals, or other recorded instructions. [77 FR 6465, Feb...

  12. 31 CFR 547.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., or any other transmission of value; weapons or related materiel; chemical or biological agents..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  13. 31 CFR 595.317 - Financial, material, or technological support.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. [78 FR...

  14. 31 CFR 543.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. [77 FR...

  15. 31 CFR 595.317 - Financial, material, or technological support.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. [78 FR...

  16. 31 CFR 543.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... transmission of value; weapons or related materiel; chemical or biological agents; explosives; false..., formulae, tables, engineering designs and specifications, manuals, or other recorded instructions. [77 FR...

  17. 31 CFR 547.313 - Financial, material, or technological support.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., or any other transmission of value; weapons or related materiel; chemical or biological agents..., diagrams, models, formulae, tables, engineering designs and specifications, manuals, or other recorded...

  18. An Educational Card Game for Learning Families of Chemical Elements

    ERIC Educational Resources Information Center

    Mariscal, Antonio Joaquin Franco; Martinez, Jose Maria Oliva; Marquez, Serafin Bernal

    2012-01-01

    This paper describes an educational card game designed to help high school students (grade 10, 15-16 years old) "understand," as opposed to memorize, the periodic table. The game may also be used to identify different chemical elements found in daily life objects. As an additional value, students learn the names and symbols of the displayed…

  19. [COSMOS motion design optimization in the CT table].

    PubMed

    Shang, Hong; Huang, Jian; Ren, Chao

    2013-03-01

    Through the CT Table dynamic simulation by COSMOS Motion, analysis the hinge of table and the motor force, then optimize the position of the hinge of table, provide the evidence of selecting bearing and motor, meanwhile enhance the design quality of the CT table and reduce the product design cost.

  20. Benchmarking in Universities: League Tables Revisited

    ERIC Educational Resources Information Center

    Turner, David

    2005-01-01

    This paper examines the practice of benchmarking universities using a "league table" approach. Taking the example of the "Sunday Times University League Table", the author reanalyses the descriptive data on UK universities. Using a linear programming technique, data envelope analysis (DEA), the author uses the re-analysis to…

  1. A Comparative Pharmacokinetic Study of the Role of Gender and Developmental Differences in Occupational and Environmental Exposure to Benzene

    DTIC Science & Technology

    1994-09-01

    Concentration and Ingested Dose when First Feeding is Delayed ................................ 4-17 Vi List of Tables Tabl P 2-1. Gender and... Feeding is D elayed ....................................... 4-18 Vii AFIT/GEE/ENV/94S. 12 Abstract The puipose of this study is two-fold. First, it...highlights the possibility of subjecting an infant to the detrimental effects of industrial chemicals through breast feeding . This study involves the

  2. Toxicology Study of Diisopropyl Methylphosphonate and Dicyclopentadiene in Mallard Ducks, Bobwhite Quail and Mink.

    DTIC Science & Technology

    1979-06-01

    hematology, etc.) measured during the chronic tests. In the OCPD tissue residue study, Mallards and Bobwhites were fed or dosed with 14C-DCPD at the...Table 73. Body weight gain of 17-day-old Mallard ducklings during 3-day post-treatment on non-treated feed after withdrawal of OCPD -treated feed...treatment recovery period ................... 261 Table 107. Feed consumption, body weight, and amount of chemical ingested by adult mink fed OCPD at

  3. Life-table methods for detecting age-risk factor interactions in long-term follow-up studies.

    PubMed

    Logue, E E; Wing, S

    1986-01-01

    Methodological investigation has suggested that age-risk factor interactions should be more evident in age of experience life tables than in follow-up time tables due to the mixing of ages of experience over follow-up time in groups defined by age at initial examination. To illustrate the two approaches, age modification of the effect of total cholesterol on ischemic heart disease mortality in two long-term follow-up studies was investigated. Follow-up time life table analysis of 116 deaths over 20 years in one study was more consistent with a uniform relative risk due to cholesterol, while age of experience life table analysis was more consistent with a monotonic negative age interaction. In a second follow-up study (160 deaths over 24 years), there was no evidence of a monotonic negative age-cholesterol interaction by either method. It was concluded that age-specific life table analysis should be used when age-risk factor interactions are considered, but that both approaches yield almost identical results in absence of age interaction. The identification of the more appropriate life-table analysis should be ultimately guided by the nature of the age or time phenomena of scientific interest.

  4. [Sodium and potassium content of various Chilean foods].

    PubMed

    Alvarez de Araya, C; Farah, M; Zuccarelli, M T; Masson, L

    1981-03-01

    Sodium and potassium contents of 40 high-protein dietary products were determined in order to complete the Table de Composición Química se Alimentos Chilenos (Chemical Composition Table of Chilean Foods). These cations' level must be strictly controlled in diets of many renal and heart patients. In Chile, Nutritionists who are in charge of preparing these diets, do not have a national composition table related to the sodium and potassium content for most of the food products. Samples of fluid cow's milk, dried milk with different fat contents, some cheeses, hen eggs, bovine entrails, some meat derivates and several meat cuts, including bovine, pork, lamb and chicken were studied.

  5. Data from a Thick Unsaturated Zone Underlying Two Artificial Recharge Sites along Oro Grande Wash in the Western Part of the Mojave Desert, near Victorville, San Bernardino County, California, 2001-2006

    USGS Publications Warehouse

    Clark, Dennis A.; Izbicki, John A.; Johnson, Russell D.; Land, Michael

    2009-01-01

    This report presents data on the physical and hydraulic properties of unsaturated alluvial deposits and on the chemical and isotopic composition of water collected at two recharge sites in the western part of the Mojave Desert, near Victorville, California, from 2001 to 2006. Unsaturated-zone monitoring sites were installed adjacent to the two recharge ponds using the ODEX air-hammer and air rotary method to depths of about 460 feet and 269 feet below land surface. Each of the two unsaturated-zone monitoring sites included a water-table well, matric-potential sensors, and suction-cup lysimeters installed in a single bore hole. Drilling procedures, lithologic and geophysical data, and site construction and instrumentation are described. Core material was analyzed for water content, bulk density, water potential, particle size, and water retention. The chemical composition of leachate from almost 400 samples of cores and cuttings was determined. Water from suction-cup lysimeters also was analyzed for chemical and isotopic composition. In addition, data on the chemical and isotopic composition of groundwater from the two water-table wells are reported along with chemical and isotopic composition of the surface water in the recharge ponds.

  6. Standardized Pearson type 3 density function area tables

    NASA Technical Reports Server (NTRS)

    Cohen, A. C.; Helm, F. R.; Sugg, M.

    1971-01-01

    Tables constituting extension of similar tables published in 1936 are presented in report form. Single and triple parameter gamma functions are discussed. Report tables should interest persons concerned with development and use of numerical analysis and evaluation methods.

  7. Arkansas, 2009 forest inventory and analysis factsheet

    Treesearch

    James F. Rosson

    2011-01-01

    The summary includes estimates of forest land area (table 1), ownership (table 2), forest-type groups (table 3), volume (tables 4 and 5), biomass (tables 6 and 7), and pine plantation area (table 8) along with maps of Arkansas’ survey units (fig. 1), percent forest by county (fig. 2), and distribution of pine plantations (fig. 3). The estimates are presented by survey...

  8. Hereditary fructose intolerance

    MedlinePlus

    ... person without this substance eats fructose or sucrose (cane or beet sugar, table sugar), complicated chemical changes ... include: Convulsions Excessive sleepiness Irritability Yellow skin or whites of the eyes (jaundice) Poor feeding as a ...

  9. An Analysis of Turnover Intentions: A Reexamination of Air Force Civil Engineering Company Grade Officers

    DTIC Science & Technology

    2012-03-01

    edu 75 Appendix C Factor Analysis of Measurement Items Interrole conflict Factor Analysis (FA): Table: KMO and Bartlett’s Test Kaiser-Meyer...Extraction Method: Principal Component Analysis. Rotation Method: Varimax with Kaiser Normalization. 77 POS FA: Table: KMO and Bartlett’s...Tempo FA: Table: KMO and Bartlett’s Test Kaiser-Meyer-Olkin Measure of Sampling Adequacy. .733 Bartlett’s Test of Sphericity Approx. Chi-Square

  10. Deciphering the "chemical" nature of the exotic isotopes of hydrogen by the MC-QTAIM analysis: the positively charged muon and the muonic helium as new members of the periodic table.

    PubMed

    Goli, Mohammad; Shahbazian, Shant

    2014-04-14

    This report is a primarily survey on the chemical nature of some exotic species containing the positively charged muon and the muonic helium, i.e., the negatively charged muon plus helium nucleus, as exotic isotopes of hydrogen, using the newly developed multi-component quantum theory of atoms in molecules (MC-QTAIM) analysis, employing ab initio non-Born-Oppenhiemer wavefunctions. Accordingly, the "atoms in molecules" analysis performed on various asymmetric exotic isotopomers of the hydrogen molecule, recently detected experimentally [Science, 2011, 331, 448], demonstrates that both the exotic isotopes are capable of forming atoms in molecules and retaining the identity of hydrogen atoms. Various derived properties of atomic basins containing the muonic helium cast no doubt that apart from its short life time, it is a heavier isotope of hydrogen while the properties of basins containing the positively charged muon are more remote from those of the orthodox hydrogen basins, capable of appreciable donation of electrons as well as large charge polarization. However, with some tolerance, they may also be categorized as hydrogen basins though with a smaller electronegativity. All in all, the present study also clearly demonstrates that the MC-QTAIM analysis is an efficient approach to decipher the chemical nature of species containing exotic constituents, which are difficult to elucidate by experimental and/or alternative theoretical schemes.

  11. A New Generation of Los Alamos Opacity Tables

    DOE PAGES

    Colgan, James Patrick; Kilcrease, David Parker; Magee, Jr., Norman H.; ...

    2016-01-26

    We present a new, publicly available, set of Los Alamos OPLIB opacity tables for the elements hydrogen through zinc. Our tables are computed using the Los Alamos ATOMIC opacity and plasma modeling code, and make use of atomic structure calculations that use fine-structure detail for all the elements considered. Our equation-of-state (EOS) model, known as ChemEOS, is based on the minimization of free energy in a chemical picture and appears to be a reasonable and robust approach to determining atomic state populations over a wide range of temperatures and densities. In this paper we discuss in detail the calculations thatmore » we have performed for the 30 elements considered, and present some comparisons of our monochromatic opacities with measurements and other opacity codes. We also use our new opacity tables in solar modeling calculations and compare and contrast such modeling with previous work.« less

  12. News & Announcements

    NASA Astrophysics Data System (ADS)

    2001-09-01

    Helge H. Wehmeier, President and Chief Executive Office of Bayer Corporation, is the recipient of the 2001 Leadership in Education Award from the Keystone Center. Wehmeier was cited for his support in spearheading ongoing education and volunteer efforts such as Bayer's Making Science Make Sense program, which, in partnership with NSF, advances science literacy through hands-on, inquiry-based science learning.

    You are invited to send contributions to the News & Announcements column. They should be sent to Elizabeth A. Moore, Associate Editor, by email or by mail at Journal of Chemical Education, 209 N. Brooks St., Madison, WI 53715-1116. Contributions should be concise, to the point, and appropriate for the Journal's audience. They may be edited for clarity, timeliness, appropriateness, or length.

  13. JPRS Report, Arms Control.

    DTIC Science & Technology

    1989-08-16

    Belgian Peace Delegation Visits, Holds Talks [AGERPRES 7 Aug] 7 LATIN AMERICA ARGENTINA Charges Filed in Missile Parts Sales to Argentina [ A ...table global convention on chemical weapons, a Chinese diplomat said here today. Speaking at the 40-nation Conference on Disarmament, Fan...Guoxiang, the Chinese ambassador for disarmament affairs, said the Chinese Government stands for a com- plete prohibition and destruction of chemical

  14. Tank 241-B-108, cores 172 and 173 analytical results for the final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nuzum, J.L., Fluoro Daniel Hanford

    1997-03-04

    The Data Summary Table (Table 3) included in this report compiles analytical results in compliance with all applicable DQOS. Liquid subsamples that were prepared for analysis by an acid adjustment of the direct subsample are indicated by a `D` in the A column in Table 3. Solid subsamples that were prepared for analysis by performing a fusion digest are indicated by an `F` in the A column in Table 3. Solid subsamples that were prepared for analysis by performing a water digest are indicated by a I.wl. or an `I` in the A column of Table 3. Due to poormore » precision and accuracy in original analysis of both Lower Half Segment 2 of Core 173 and the core composite of Core 173, fusion and water digests were performed for a second time. Precision and accuracy improved with the repreparation of Core 173 Composite. Analyses with the repreparation of Lower Half Segment 2 of Core 173 did not show improvement and suggest sample heterogeneity. Results from both preparations are included in Table 3.« less

  15. MetaNetter 2: A Cytoscape plugin for ab initio network analysis and metabolite feature classification.

    PubMed

    Burgess, K E V; Borutzki, Y; Rankin, N; Daly, R; Jourdan, F

    2017-12-15

    Metabolomics frequently relies on the use of high resolution mass spectrometry data. Classification and filtering of this data remain a challenging task due to the plethora of complex mass spectral artefacts, chemical noise, adducts and fragmentation that occur during ionisation and analysis. Additionally, the relationships between detected compounds can provide a wealth of information about the nature of the samples and the biochemistry that gave rise to them. We present a biochemical networking tool: MetaNetter 2 that is based on the original MetaNetter, a Cytoscape plugin that creates ab initio networks. The new version supports two major improvements: the generation of adduct networks and the creation of tables that map adduct or transformation patterns across multiple samples, providing a readout of compound relationships. We have applied this tool to the analysis of adduct patterns in the same sample separated under two different chromatographies, allowing inferences to be made about the effect of different buffer conditions on adduct detection, and the application of the chemical transformation analysis to both a single fragmentation analysis and an all-ions fragmentation dataset. Finally, we present an analysis of a dataset derived from anaerobic and aerobic growth of the organism Staphylococcus aureus demonstrating the utility of the tool for biological analysis. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

  16. Ultrafast Passive Shields for Laser and Ballistic Protection

    DTIC Science & Technology

    1991-07-15

    chemically polymerized P(DPA)) as a binder, and these were tested for ablation (i.e. laser damage threshold ) limits. Table IV below summarizes these results...50, 100, 250 and 500 AJ/pulse o 1.G, 2.5, 5.0 mJ/pulse. The following energies were used for the preliminary laser damage threshold tests: o 2.5, 5.0...these were tested for ablation (i.e. laser damage threshold ) limits. Table VI summarizes these results which are all for tests in the absence of an iris

  17. Biological Utilization of Wood for Production of Chemicals and Foodstuffs.

    DTIC Science & Technology

    1981-03-01

    ration and, corn . The results are presented in of lambs. As high as 20 percent of although the cost of gains on the table 50. The results of the...differs in that, after an initial 185 ° C. At this time, most of the low- Residues high in bark reduce the period of low-temperature hydrolysis...and hydrolyzate is removed at the per part of the chip bed. The high table 6. bottom with no interruptions until the through-put rate is continued until

  18. Water Entry and the Cavity-Running Behavior of Missiles

    DTIC Science & Technology

    1975-01-01

    T. H., Tables of Physical and Chemical Constants, John Wiley and Sons, Inc., New York, 13th Ed. 1966 1-5. Wilson, W., "Tables for the Speed of Sound...demonstrated experimentally and theoretically by Chuang (Ref. (4-1)) and at approximately the same time by tests of Verhagen (Ref. (4-2)), Lewison and...the pressures, but Lewison and Maclean stated that rough-water performance was not repeatab*le. While the shock would be much more inrtense if air

  19. Verification of aerial photo stand volume tables for southeast Alaska.

    Treesearch

    Theodore S. Setzer; Bert R. Mead

    1988-01-01

    Aerial photo volume tables are used in the multilevel sampling system of Alaska Forest Inventory and Analysis. These volume tables are presented with a description of the data base and methods used to construct the tables. Volume estimates compiled from the aerial photo stand volume tables and associated ground-measured values are compared and evaluated.

  20. Evaluation of vitamin A and carotenoid data in food composition tables.

    PubMed

    Beecher, G R; Khachik, F

    1984-12-01

    Vitamin A and carotenoid data in food composition tables have been generated with the use of the Association of Official Analytical Chemists procedures. These procedures fractionate complex mixtures of retinoids and carotenoids into only three fractions, e.g., retinoids, carotenes, and xanthophylls. Food tables lack uniformity in the presentation of vitamin A and carotenoid data. For example, the revisions of Agriculture Handbook, No. 8 (Washington, D.C.: U.S. Govt Print Off, 1963), report both international units and retinol equivalents of vitamin A in foods. Food tables published in the United Kingdom (Paul AA, Southgate DA. McCance and Widdowson's: The composition of foods. Amsterdam: Elsevier/North-Holland, 1978) report preformed vitamin A as retinol and carotenoids as carotene on a weight basis (micrograms/100 g food). The vitamin A and carotenoid data currently available in food composition tables allow only the intake of total vitamin A activity to be estimated. Information about the intake of specific species of retinoids or carotenoids is not available and could not be calculated from existing food tables. Limited applications of new separation techniques and chemical instrumentation have demonstrated the potential for generating detailed analytic information in regard to the retinoid and carotenoid contents of foods.

  1. IUPAC Periodic Table of Isotopes for the Educational Community

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Holden N. E.; Holden,N.E.; Coplen,T.B.

    2012-07-15

    John Dalton first proposed the concept of atomic weights of the elements in the first decade of the nineteenth century. These atomic weights of the chemical elements were thought of as constants of nature, similar to the speed of light. Dmitri Mendeleev arranged the atomic weights of the elements in ascending order of value and used the systematic variation of their chemical properties to produce his Periodic Table of the Elements in 1869. Measurement of atomic weight values became an important chemical activity for a century and a half. Theodore Richards received a Noble Prize for his work in thismore » area. In 1913, Fredrick Soddy found a species of radium, which had an atomic weight value of 228, compared to the familiar radium gas value of 226. Soddy coined the term 'isotope' (Greek for 'in the same place') to account for this second atomic weight value in the radium position of the Periodic Table. Both of these isotopes of radium are radioactive. Radioactive isotopes are energetically unstable and will decay (disintegrate) over time. The time it takes for one half of a sample of a given radioactive isotope to decay is the half-life of that isotope. In addition to having different atomic weight values, radium-226 and radium-228 also have different half-life values. Around the same time as Soddy's work, J.J. Thomson (discoverer of the electron) identified two stable (non-radioactive) isotopes of the same element, neon. Over the next 40 years, the majority of the known chemical elements were found to have two or more stable (or long-lived radioactive isotopes that contribute significantly to the determination of the atomic weights of the elements).« less

  2. Image Analysis Program for Measuring Particles with the Zeiss CSM 950 Scanning Electron Microscope (SEM)

    DTIC Science & Technology

    1990-01-01

    7 𔄁 . ,: 1& *U _’ ś TECHNICAL REPORT AD NATICK/TR-90/014 (V) N* IMAGE ANALYSIS PROGRAM FOR MEASURING PARTICLES < WITH THE ZEISS CSM 950 SCANNING... image analysis program for measuring particles using the Zeiss CSM 950/Kontron system is as follows: A>CSM calls the image analysis program. Press D to...27 vili LIST OF TABLES TABLE PAGE 1. Image Analysis Program for Measuring 29 Spherical Particles 14 2. Printout of Statistical Data Frcm Table 1 16 3

  3. Small-Chamber Measurements of Chemical-Specific Emission Factors for Drywall

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Maddalena, Randy; Russell, Marion; Apte, Michael G.

    2010-06-01

    Imported drywall installed in U.S. homes is suspected of being a source of odorous and potentially corrosive indoor pollutants. To support an investigation of those building materials by the Consumer Products Safety Commission (CPSC), Lawrence Berkeley National Laboratory (LBNL) measured chemical-specific emission factors for 30 samples of drywall materials. Emission factors are reported for 75 chemicals and 30 different drywall samples encompassing both domestic and imported stock and incorporating natural, synthetic, or mixed gypsum core material. CPSC supplied all drywall materials. First the drywall samples were isolated and conditioned in dedicated chambers, then they were transferred to small chambers wheremore » emission testing was performed. Four sampling and analysis methods were utilized to assess (1) volatile organic compounds, (2) low molecular weight carbonyls, (3) volatile sulfur compounds, and (4) reactive sulfur gases. LBNL developed a new method that combines the use of solid phase microextraction (SPME) with small emission chambers to measure the reactive sulfur gases, then extended that technique to measure the full suite of volatile sulfur compounds. The testing procedure and analysis methods are described in detail herein. Emission factors were measured under a single set of controlled environmental conditions. The results are compared graphically for each method and in detailed tables for use in estimating indoor exposure concentrations.« less

  4. Installation Restoration Program. Preliminary Assessment: Nevada Air National Guard, 152nd Tactical Reconnaissance Group (TRG), Reno Cannon International Airport, Reno, Nevada.*

    DTIC Science & Technology

    1989-01-01

    survey for the southern part of Washoe Ccunty provides data on sane physical and chemical properties of soils . The data deteied to be pertinent to on...base soils is presented in Table 3, Physical and Chemical Properties of Soils Occrring on the NVANG Base in Reno, Nevada. Analyses of surface water and...NVANG Base . . . ...... .. . .. . . 111-6 3. Physical and Chemical Prperties of Soils Occrring on the NVANG Base in Reno, Nevada

  5. Advances in R&D in near-infrared spectroscopy in Japan

    NASA Astrophysics Data System (ADS)

    Kawano, Sumio; Iwamoto, Mutsuo

    1991-02-01

    More than 20 years ago when Mr. K. H. Norris firstly introduced the near infrared spectroscopy (NIRS) as a powerful technology in the field of composition analysis of cereals those who were interested in the area of classical spectroscopy would not like to recognize its potential. This tendency still remains at present however it leaves no room for doubt that from viewpoints of applied spectroscopy the NIRS has consolidated its position. From a viewpoint of NIRS application in the field of nondestructive or non invasive measuring techniques history of this technology is only the last decade in Japan. However since the technology was firstly introduced to composition analysis of agricultural commodities in the same manner as in other countries R and D have been growing more actively in diversified fields such as agriculture and industry as well as medical science. In addition the NIRS technology are becoming of general interest by combining other techniques to create various hyphenated instrumentations such as FTNIR MCFTNIR NIRCT and NIR-NMR. In this paper new trends of R D on NIR spectroscopy which are being conducted in Japan will be reviewed. 2. S1JMMARY OF PRESENT R D ON NIRS IN JAPAN NIRS applications reported in the last 3 years are summarized in Table 1. Table 1 Applications of NIRS in Japan Application for Agriculture Taste evaluation of rice and coffee Determination of chemical compositions rice for breeding Determination of chemical compositions in tea Determination of sugar contents in intact peaches Japanese pears Satsuma oranges and apples Determination of sugars and acids in intact tomatoes Determination of forage composition Application for Industry Analysis of state of water in foods Application of analyzing Maillard Reaction''s Process Pattern recognition of NIR spectra as related to process control of roasting coffee beans Quality control of tea processing Determination of moisture content of Surimi products 2 / SPIE Vol. 1379 Optics in Agriculture (1990)

  6. A novel approach: chemical relational databases, and the role of the ISSCAN database on assessing chemical carcinogenicity.

    PubMed

    Benigni, Romualdo; Bossa, Cecilia; Richard, Ann M; Yang, Chihae

    2008-01-01

    Mutagenicity and carcinogenicity databases are crucial resources for toxicologists and regulators involved in chemicals risk assessment. Until recently, existing public toxicity databases have been constructed primarily as "look-up-tables" of existing data, and most often did not contain chemical structures. Concepts and technologies originated from the structure-activity relationships science have provided powerful tools to create new types of databases, where the effective linkage of chemical toxicity with chemical structure can facilitate and greatly enhance data gathering and hypothesis generation, by permitting: a) exploration across both chemical and biological domains; and b) structure-searchability through the data. This paper reviews the main public databases, together with the progress in the field of chemical relational databases, and presents the ISSCAN database on experimental chemical carcinogens.

  7. Risk Factors for Sexual Violence in the Military: An Analysis of Sexual Assault and Sexual Harassment Incidents and Reporting

    DTIC Science & Technology

    2017-03-01

    53 ix LIST OF TABLES Table 1. Descriptive Statistics for Control Variables by... Statistics for Control Variables by Gender (Random Subsample with Complete Survey) ............................................................30 Table...empirical analysis. Chapter IV describes the summary statistics and results. Finally, Chapter V offers concluding thoughts, study limitations, and

  8. A Process Improvement Study on a Military System of Clinics to Manage Patient Demand and Resource Utilization Using Discrete-Event Simulation, Sensitivity Analysis, and Cost-Benefit Analysis

    DTIC Science & Technology

    2015-03-12

    26 Table 3: Optometry Clinic Frequency Count... Optometry Clinic Frequency Count.................................................................. 86 Table 22: Probability Distribution Summary Table...Clinic, the Audiology Clinic, and the Optometry Clinic. Methodology Overview The overarching research goal is to identify feasible solutions to

  9. Chemical Exposures - Prevention Summary Table | Cancer Trends Progress Report

    Cancer.gov

    The Cancer Trends Progress Report, first issued in 2001, summarizes our nation's advances against cancer in relation to Healthy People targets set forth by the Department of Health and Human Services.

  10. Electrosynthesis Technology.

    ERIC Educational Resources Information Center

    Weinberg, Norman L.

    1983-01-01

    Provides a prospective on electrosynthesis technology for chemical educators and students by discussing electrosynthesis reactions and experiments. Includes tables illustrating some electrochemical products, variables to consider in electrochemical reactions, indirect electrolysis of organic compounds, examples of direct/indirect electrochemical…

  11. Index of stations: surface-water data-collection network of Texas, September 1998

    USGS Publications Warehouse

    Gandara, Susan C.; Barbie, Dana L.

    1999-01-01

    As of September 30, 1998, the surface-water data-collection network of Texas (table 1) included 313 continuous-recording streamflow stations (D), 22 gage-height record only stations (G), 23 crest-stage partial-record stations (C), 39 flood-hydrograph partial-record stations (H), 25 low-flow partial-record stations (L), 1 continuous-recording temperature station (M1), 25 continuous-recording temperature and conductivity stations (M2), 3 continuous-recording temperature, conductivity, and dissolved oxygen stations (M3), 13 continuous-recording temperature, conductivity, dissolved oxygen, and pH stations (M4), 5 daily chemical-quality stations (Qd), 133 periodic chemical-quality stations (Qp), 16 reservoir/lake surveys for water quality (Qs), and 70 continuous or daily reservoir-content stations (R). Plate 1 identifies the major river basins in Texas and shows the location of the stations listed in table 1.

  12. Preliminary Water-Table Map and Water-Quality Data for Part of the Matanuska-Susitna Valley, Alaska, 2005

    USGS Publications Warehouse

    Moran, Edward H.; Solin, Gary L.

    2006-01-01

    The Matanuska-Susitna Valley is in the northeastern part of the Cook Inlet Basin, Alaska, an area experiencing rapid population growth and development proximal to many lakes. Here water commonly flows between lakes and ground water, indicating interrelation between water quantity and quality. Thus concerns exist that poorer quality ground water may degrade local lake ecosystems. This concern has led to water-quality sampling in cooperation with the Alaska Department of Environmental Conservation and the Matanuska-Susitna Borough. A map showing the estimated altitude of the water table illustrates potential ground-water flow directions and areas where ground- and surface-water exchanges and interactions might occur. Water quality measured in selected wells and lakes indicates some differences between ground water and surface water. 'The temporal and spatial scarcity of ground-water-level and water-quality data limits the analysis of flow direction and water quality. Regionally, the water-table map indicates that ground water in the eastern and southern parts of the study area flows southerly. In the northcentral area, ground water flows predominately westerly then southerly. Although ground and surface water in most areas of the Matanuska-Susitna Valley are interconnected, they are chemically different. Analyses of the few water-quality samples collected in the area indicate that dissolved nitrite plus nitrate and orthophosphorus concentrations are higher in ground water than in surface water.'

  13. Gallium--A smart metal

    USGS Publications Warehouse

    Foley, Nora; Jaskula, Brian W.

    2013-01-01

    Gallium is a soft, silvery metallic element with an atomic number of 31 and the chemical symbol Ga. The French chemist Paul-Emile Lecoq de Boisbaudran discovered gallium in sphalerite (a zinc-sulfide mineral) in 1875 using spectroscopy. He named the element "gallia" after his native land of France (formerly Gaul; in Latin, Gallia). The existence of gallium had been predicted in 1871 by Dmitri Mendeleev, the Russian chemist who published the first periodic table of the elements. Mendeleev noted a gap in his table and named the missing element "eka-aluminum" because he determined that its location was one place away from aluminum in the table. Mendeleev thought that the missing element (gallium) would be very much like aluminum in its chemical properties, and he was right. Solid gallium has a low melting temperature (~29 degrees Celsius, or °C) and an unusually high boiling point (~2,204 °C). Because of these properties, the earliest uses of gallium were in high-temperature thermometers and in designing metal alloys that melt easily. The development of a gallium-based direct band-gap semiconductor in the 1960s led to what is now one of the most well-known applications for gallium-based products--the manufacture of smartphones and data-centric networks.

  14. Data and Summaries for Catalytic Destruction of a Surrogate Organic Hazardous Air Pollutant as a Potential Co-benefit for Coal-Fired Selective Catalytic Reduction Systems

    EPA Pesticide Factsheets

    Table 1 summarizes and explanis the Operating Conditions of the SCR Reactor used in the Benzene-Destruction.Table 2 summarizes and explains the Experimental Design and Test Results.Table 3 summarizes and explains the Estimates for Individual Effects and Cross Effects Obtained from the Linear Regression Models for Destruction of C6H6 and Reduction of NO.Fig. 1 shows the Down-flow SCR reactor system in detail.Fig. 2 shows the graphical summary of the Effect of the inlet C6H6 concentration to the SCR reactor on the destruction of C6H6.Fig.3 shows the summary of Carbon mass balance for C6H6 destruction promoted by the V2O5-WO3/TiO2 catalyst.This dataset is associated with the following publication:Lee , C., Y. Zhao, S. Lu, and W.R. Stevens. Catalytic Destruction of a Surrogate Organic Hazardous Air Polutant as a Potential Co-benefit for Coal-fired Selective Catalyst Reduction Systems. AMERICAN CHEMICAL SOCIETY. American Chemical Society, Washington, DC, USA, 30(3): 2240-2247, (2016).

  15. Zero-Kelvin compression isotherms of the elements 1 ≤ Z ≤ 92 to 100 GPa [Zero-Kelvin compression isotherms of the elements 1 ≤ Z ≤ 90 to 100 GPa (1 megabar)

    DOE PAGES

    Young, David A.; Cynn, Hyunchae; Soderlind, Per; ...

    2016-10-24

    Most of the chemical elements have now been compressed close to or above 100 GPa (1 Mbar) pressure in diamond-anvil cells and the pressure–volume room-temperature isotherms have been measured. We collect these data and use simple lattice-dynamics models to reduce the isotherms to 0 K. We have extended the published work by making new diamond-anvil-cell measurements on Cr and Rh, and by conducting density-functional calculations on the elements Po, At, Rn, Fr, Ra, and Ac. The 0 K data are tabulated for all elements 1 ≤ Z ≤ 92 and 0 ≤ P ≤ 100 GPa. These data are usefulmore » for generating wide-range equation of state models and for studying the stability of chemical compounds at high pressure (“Megabar chemistry”). As a result, the tables presented here are intended to be reference thermodynamic tables for use in high-pressure research. Further experimental and theoretical work will be needed to extend the tables to higher pressure and to improve accuracy.« less

  16. The Ballistic and Corrosion Evaluation of Magnesium Elektron E675 vs. Baseline Magnesium Alloy AZ31B and Aluminum Alloy 5083 for Armor Applications

    DTIC Science & Technology

    2011-06-01

    critical property in reducing the plastic failure of the material. The ductility is marginally better than Mg AZ31B. 2 Table 1. Chemical...composition (%) of metal alloys. Element (%)/Alloy CPMg 9980B AZ31B-H24 AA5083-H131 Aluminum — 2.5–3.5 REM Manganese 0.10 max 0.2–1.0 0.40‒1.0 Zinc — 0.6...This trend was attributed to the lack of ductility in E675 compared to 5083, which reduced energy dissipation. Visual analysis of the Mg E675

  17. Topological study of the periodic system.

    PubMed

    Restrepo, Guillermo; Mesa, Héber; Llanos, Eugenio J; Villaveces, José L

    2004-01-01

    We carried out a topological study of the Space of Chemical Elements, SCE, based on a clustering analysis of 72 elements, each one defined by a vector of 31 properties. We looked for neighborhoods, boundaries, and other topological properties of the SCE. Among the results one sees the well-known patterns of the Periodic Table and relationships such as the Singularity Principle and the Diagonal Relationship, but there appears also a robustness property of some of the better-known families of elements. Alkaline metals and Noble Gases are sets whose neighborhoods have no other elements besides themselves, whereas the topological boundary of the set of metals is formed by semimetallic elements.

  18. Sucrose and Related Oligosaccharides

    NASA Astrophysics Data System (ADS)

    Eggleston, Gillian

    Sucrose (α-D-glucopyranosyl-(1↔2)-β-D-fructofuranoside) is the most common low-molecular-weight sugar found in the plant kingdom. It is ubiquitously known as common table sugar and primarily produced industrially from sugarcane (Saccharum officinarum) and sugar beet (Beta vulgaris); the basics of the industrial manufacture of sucrose are outlined in this chapter. Commercial sucrose has a very high purity (> 99.9%) making it one of the purest organic substances produced on an industrial scale. Value-addition to sucrose via chemical and biotechnological reactions is becoming more important for the diversification of the sugar industry to maintain the industries' competitiveness in a world increasingly turning to a bio-based economy. The basis for the chemical reactivity of sucrose is the eight hydroxyl groups present on the molecule, although, sucrose chemical reactivity is regarded as difficult. Increasing use of enzymatic biotechnological techniques to derivatize sucrose is expected, to add special functionalities to sucrose products like biodegradability, biocompatibility, and non-toxicity. Analysis of sucrose by colorimetric, enzymatic, oxidation-reduction and chromatography methods are discussed. Oligosaccharides related to sucrose are outlined in detail and include sucrose-based plant, honey and in vitro oligosaccharides.

  19. Chemical reaction for Carreau-Yasuda nanofluid flow past a nonlinear stretching sheet considering Joule heating

    NASA Astrophysics Data System (ADS)

    Khan, Mair; Shahid, Amna; Malik, M. Y.; Salahuddin, T.

    2018-03-01

    Current analysis has been made to scrutinize the consequences of chemical response against magneto-hydrodynamic Carreau-Yasuda nanofluid flow induced by a non-linear stretching surface considering zero normal flux, slip and convective boundary conditions. Joule heating effect is also considered. Appropriate similarity approach is used to convert leading system of PDE's for Carreau-Yasuda nanofluid into nonlinear ODE's. Well known mathematical scheme namely shooting method is utilized to solve the system numerically. Physical parameters, namely Weissenberg number We , thermal slip parameter δ , thermophoresis number NT, non-linear stretching parameter n, magnetic field parameter M, velocity slip parameter k , Lewis number Le, Brownian motion parameter NB, Prandtl number Pr, Eckert number Ec and chemical reaction parameter γ upon temperature, velocity and concentration profiles are visualized through graphs and tables. Numerical influence of mass and heat transfer rates and friction factor are also represented in tabular as well as graphical form respectively. Skin friction coefficient reduces when Weissenberg number We is incremented. Rate of heat transfer enhances for large values of Brownian motion constraint NB. By increasing Lewis quantity Le rate of mass transfer declines.

  20. The elements of life and medicines

    PubMed Central

    Chellan, Prinessa; Sadler, Peter J

    2015-01-01

    Which elements are essential for human life? Here we make an element-by-element journey through the periodic table and attempt to assess whether elements are essential or not, and if they are, whether there is a relevant code for them in the human genome. There are many difficulties such as the human biochemistry of several so-called essential elements is not well understood, and it is not clear how we should classify elements that are involved in the destruction of invading microorganisms, or elements which are essential for microorganisms with which we live in symbiosis. In general, genes do not code for the elements themselves, but for specific chemical species, i.e. for the element, its oxidation state, type and number of coordinated ligands, and the coordination geometry. Today, the biological periodic table is in a position somewhat similar to Mendeleev's chemical periodic table of 1869: there are gaps and we need to do more research to fill them. The periodic table also offers potential for novel therapeutic and diagnostic agents, based on not only essential elements, but also non-essential elements, and on radionuclides. Although the potential for inorganic chemistry in medicine was realized more than 2000 years ago, this area of research is still in its infancy. Future advances in the design of inorganic drugs require more knowledge of their mechanism of action, including target sites and metabolism. Temporal speciation of elements in their biological environments at the atomic level is a major challenge, for which new methods are urgently needed. PMID:25666066

  1. The elements of life and medicines.

    PubMed

    Chellan, Prinessa; Sadler, Peter J

    2015-03-13

    Which elements are essential for human life? Here we make an element-by-element journey through the periodic table and attempt to assess whether elements are essential or not, and if they are, whether there is a relevant code for them in the human genome. There are many difficulties such as the human biochemistry of several so-called essential elements is not well understood, and it is not clear how we should classify elements that are involved in the destruction of invading microorganisms, or elements which are essential for microorganisms with which we live in symbiosis. In general, genes do not code for the elements themselves, but for specific chemical species, i.e. for the element, its oxidation state, type and number of coordinated ligands, and the coordination geometry. Today, the biological periodic table is in a position somewhat similar to Mendeleev's chemical periodic table of 1869: there are gaps and we need to do more research to fill them. The periodic table also offers potential for novel therapeutic and diagnostic agents, based on not only essential elements, but also non-essential elements, and on radionuclides. Although the potential for inorganic chemistry in medicine was realized more than 2000 years ago, this area of research is still in its infancy. Future advances in the design of inorganic drugs require more knowledge of their mechanism of action, including target sites and metabolism. Temporal speciation of elements in their biological environments at the atomic level is a major challenge, for which new methods are urgently needed.

  2. The International Space Station Comparative Maintenance Analysis(CMAM)

    DTIC Science & Technology

    2004-09-01

    External Component • Entire ORU Database 2. Database Connectivity The CMAM ORU database consists of three tables: an ORU master parts list , an ISS...Flight table, and an ISS Subsystem table. The ORU master parts list and the ISS Flight table can be updated or modified from the CMAM user interface

  3. Some applications of categorical data analysis to epidemiological studies.

    PubMed Central

    Grizzle, J E; Koch, G G

    1979-01-01

    Several examples of categorized data from epidemiological studies are analyzed to illustrate that more informative analysis than tests of independence can be performed by fitting models. All of the analyses fit into a unified conceptual framework that can be performed by weighted least squares. The methods presented show how to calculate point estimate of parameters, asymptotic variances, and asymptotically valid chi 2 tests. The examples presented are analysis of relative risks estimated from several 2 x 2 tables, analysis of selected features of life tables, construction of synthetic life tables from cross-sectional studies, and analysis of dose-response curves. PMID:540590

  4. Ortholog Identification and Comparative Analysis of Microbial Genomes Using MBGD and RECOG.

    PubMed

    Uchiyama, Ikuo

    2017-01-01

    Comparative genomics is becoming an essential approach for identification of genes associated with a specific function or phenotype. Here, we introduce the microbial genome database for comparative analysis (MBGD), which is a comprehensive ortholog database among the microbial genomes available so far. MBGD contains several precomputed ortholog tables including the standard ortholog table covering the entire taxonomic range and taxon-specific ortholog tables for various major taxa. In addition, MBGD allows the users to create an ortholog table within any specified set of genomes through dynamic calculations. In particular, MBGD has a "My MBGD" mode where users can upload their original genome sequences and incorporate them into orthology analysis. The created ortholog table can serve as the basis for various comparative analyses. Here, we describe the use of MBGD and briefly explain how to utilize the orthology information during comparative genome analysis in combination with the stand-alone comparative genomics software RECOG, focusing on the application to comparison of closely related microbial genomes.

  5. Analysis of Modal Growth on the Leeward Centerplane of the X-51 Vehicle

    DTIC Science & Technology

    2009-09-01

    Research Center ( CUBRC ) 4455 Genesee Street Buffalo, NY 14225 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) Air Force Research...8 Figure 9. Disturbance N-factor Growth and CUBRC Data Showing Transition...for CUBRC Run 4 9 LIST OF TABLES Table Page Table 1. Freestream Conditions for Ground Test Cases Selected for Modal Analysis Study

  6. Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Workflow Protocols

    DTIC Science & Technology

    2016-06-01

    unlimited. v List of Tables Table 1 Single-lap-joint experimental parameters ..............................................7 Table 2 Survey ...Joints: Experimental and Workflow Protocols by Robert E Jensen, Daniel C DeSchepper, and David P Flanagan Approved for...TR-7696 ● JUNE 2016 US Army Research Laboratory Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental

  7. The influence of nitrate, nitrite, and dissolved oxygen on uranium oxidation in the presence of a sediment microbial community

    NASA Astrophysics Data System (ADS)

    Cardarelli, E.; Bargar, J.; Dam, W. L.; Francis, C.

    2016-12-01

    The storage vaults for low and intermediate-level short-lived radioactive waste in the East of France are settled on the Aptian sand layer. In the context of the periodic examination by the nuclear regulators, it has been recommended to assess more precisely the chemical conditions for a potential release of radionuclides in the underlying water table. In particular, this study aims at assessing the eventuality of spreading an alkaline plume in the Aptian sand pore water by the chemical degradation of the vault cementitious materials. The numerical approach developed for this purpose is supported by both experimental characterizations of tracers in the water table and results from preliminary numerical studies on the hydrology of the site and the hydraulic evolution of the storage. The results from these specific simulations were simplified in the reactive transport model to focus on the mechanistic description of the chemical processes taking place in the waste and vaults and on their consequences on the underlying water table. During the operating period of the disposal, the reactive transport modelling shows that the low water saturation in the vaults material and in the vadose zone prevents the aquifer from a significant increase of the water pH under the cement-based vaults. These results are in reasonable agreement with the pH regularly measured in the underlying water table. After storage closure, during the few hundred years of the monitoring period and furthermore beyond, the reactive transport modelling shows a noticeable release of hydroxyls and alkali ions under the disposal vaults and their spread downstream the storage site leading to pH values above 10. It is noteworthy that the pH is not buffered in the Aptian sands because of their low amount in clayey minerals. This effect is now considered for pH-sensitive radionuclide solutes in safety assessment calculations by weighting correspondingly their retention parameters.

  8. Alkaline Plume in the Aptian Sand Aquifer in the Context of Low-Level Radioactive Waste Surface Disposal

    NASA Astrophysics Data System (ADS)

    Cochepin, B.; Munier, I.; MADE, B.

    2017-12-01

    The storage vaults for low and intermediate-level short-lived radioactive waste in the East of France are settled on the Aptian sand layer. In the context of the periodic examination by the nuclear regulators, it has been recommended to assess more precisely the chemical conditions for a potential release of radionuclides in the underlying water table. In particular, this study aims at assessing the eventuality of spreading an alkaline plume in the Aptian sand pore water by the chemical degradation of the vault cementitious materials. The numerical approach developed for this purpose is supported by both experimental characterizations of tracers in the water table and results from preliminary numerical studies on the hydrology of the site and the hydraulic evolution of the storage. The results from these specific simulations were simplified in the reactive transport model to focus on the mechanistic description of the chemical processes taking place in the waste and vaults and on their consequences on the underlying water table. During the operating period of the disposal, the reactive transport modelling shows that the low water saturation in the vaults material and in the vadose zone prevents the aquifer from a significant increase of the water pH under the cement-based vaults. These results are in reasonable agreement with the pH regularly measured in the underlying water table. After storage closure, during the few hundred years of the monitoring period and furthermore beyond, the reactive transport modelling shows a noticeable release of hydroxyls and alkali ions under the disposal vaults and their spread downstream the storage site leading to pH values above 10. It is noteworthy that the pH is not buffered in the Aptian sands because of their low amount in clayey minerals. This effect is now considered for pH-sensitive radionuclide solutes in safety assessment calculations by weighting correspondingly their retention parameters.

  9. 40 CFR 414.41 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS Thermoplastic... concentration listed in the following table. Effluent characteristics BPT Effluent Limitations 1 Maximum for any...

  10. 40 CFR 414.51 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS Thermosetting... concentration listed in the following table. Effluent characteristics BPT effluent limitations 1 Maximum for any...

  11. MIL-HDBK-338-Environmental Conversion Table Correction

    NASA Technical Reports Server (NTRS)

    Hark, Frank; Novack, Steve

    2017-01-01

    In reliability analysis for space launch vehicles, limited data is frequently a challenge due to the pure number of launches. A common solution is to use surrogate historical data of similar components from other industries (military data). The operating environment of the common data may be different from that of the necessary target analysis. The military electronic design handbook (MIL-HDBK-338) has a table for converting Mean Time Between Failure (MTBF) data from one environment to another. However, the table has some discrepancies and rounding of complementary conversions; namely going from environment A to B does not given the same result as going from B to A. This presentation will show the discrepancies in the original conversation table, the greater than expected magnitude, the problem with the updated published table and a suggested corrected table to reference when doing MTBF data environment conversion.

  12. Where to place the positive muon in the Periodic Table?

    PubMed

    Goli, Mohammad; Shahbazian, Shant

    2015-03-14

    In a recent study it was suggested that the positively charged muon is capable of forming its own "atoms in molecules" (AIM) in the muonic hydrogen-like molecules, composed of two electrons, a muon and one of the hydrogen's isotopes, thus deserves to be placed in the Periodic Table [Phys. Chem. Chem. Phys., 2014, 16, 6602]. In the present report, the capacity of the positively charged muon in forming its own AIM is considered in a large set of molecules replacing muons with all protons in the hydrides of the second and third rows of the Periodic Table. Accordingly, in a comparative study the wavefunctions of both sets of hydrides and their muonic congeners are first derived beyond the Born-Oppenheimer (BO) paradigm, assuming protons and muons as quantum waves instead of clamped particles. Then, the non-BO wavefunctions are used to derive the AIM structures of both hydrides and muonic congeners within the context of the multi-component quantum theory of atoms in molecules. The results of the analysis demonstrate that muons are generally capable of forming their own atomic basins and the properties of these basins are not fundamentally different from those AIM containing protons. Particularly, the bonding modes in the muonic species seem to be qualitatively similar to their congener hydrides and no new bonding model is required to describe the bonding of muons to a diverse set of neighboring atoms. All in all, the positively charged muon is similar to a proton from the structural and bonding viewpoint and deserves to be placed in the same box of hydrogen in the Periodic Table. This conclusion is in line with a large body of studies on the chemical kinetics of the muonic molecules portraying the positively charged muon as a lighter isotope of hydrogen.

  13. 40 CFR Table 5 to Subpart Jjjjjj... - Fuel Analysis Requirements

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 15 2012-07-01 2012-07-01 false Fuel Analysis Requirements 5 Table 5... Part 63—Fuel Analysis Requirements As stated in § 63.11213, you must comply with the following requirements for fuel analysis testing for affected sources: To conduct a fuel analysis for the following...

  14. A combined chemical, isotopic and microstructural study of pyrite from roll-front uranium deposits, Lake Eyre Basin, South Australia

    NASA Astrophysics Data System (ADS)

    Ingham, Edwina S.; Cook, Nigel J.; Cliff, John; Ciobanu, Cristiana L.; Huddleston, Adam

    2014-01-01

    The common sulfide mineral pyrite is abundant throughout sedimentary uranium systems at Pepegoona, Pepegoona West and Pannikan, Lake Eyre Basin, South Australia. Combined chemical, isotopic and microstructural analysis of pyrite indicates variation in fluid composition, sulfur source and precipitation conditions during a protracted mineralization event. The results show the significant role played by pyrite as a metal scavenger and monitor of fluid changes in low-temperature hydrothermal systems. In-situ micrometer-scale sulfur isotope analyses of pyrite demonstrated broad-scale isotopic heterogeneity (δ34S = -43.9 to +32.4‰VCDT), indicative of complex, multi-faceted pyrite evolution, and sulfur derived from more than a single source. Preserved textures support this assertion and indicate a genetic model involving more than one phase of pyrite formation. Authigenic pyrite underwent prolonged evolution and recrystallization, evidenced by a genetic relationship between archetypal framboidal aggregates and pyrite euhedra. Secondary hydrothermal pyrite commonly displays hyper-enrichment of several trace elements (Mn, Co, Ni, As, Se, Mo, Sb, W and Tl) in ore-bearing horizons. Hydrothermal fluids of magmatic and meteoric origins supplied metals to the system but the geochemical signature of pyrite suggests a dominantly granitic source and also the influence of mafic rock types. Irregular variation in δ34S, coupled with oscillatory trace element zonation in secondary pyrite, is interpreted in terms of continuous variations in fluid composition and cycles of diagenetic recrystallization. A late-stage oxidizing fluid may have mobilized selenium from pre-existing pyrite. Subsequent restoration of reduced conditions within the aquifer caused ongoing pyrite re-crystallization and precipitation of selenium as native selenium. These results provide the first qualitative constraints on the formation mechanisms of the uranium deposits at Beverley North. Insights into depositional conditions and sources of both sulfide and uranium mineralization and an improved understanding of pyrite geochemistry can also underpin an effective vector for uranium exploration at Beverley North and other sedimentary systems of the Lake Eyre Basin, as well as in comparable geological environments elsewhere. Average intensity of 32S signal in counts per second × 108.Drift corrected 34S/32S prior to IMF calibration.Two-sigma propagated uncertainty on individual measurements.

  15. CHEMICAL STORAGE: MYTHS VERSUS REALITY

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Simmons, F

    A large number of resources explaining proper chemical storage are available. These resources include books, databases/tables, and articles that explain various aspects of chemical storage including compatible chemical storage, signage, and regulatory requirements. Another source is the chemical manufacturer or distributor who provides storage information in the form of icons or color coding schemes on container labels. Despite the availability of these resources, chemical accidents stemming from improper storage, according to recent reports (1) (2), make up almost 25% of all chemical accidents. This relatively high percentage of chemical storage accidents suggests that these publications and color coding schemes althoughmore » helpful, still provide incomplete information that may not completely mitigate storage risks. This manuscript will explore some ways published storage information may be incomplete, examine the associated risks, and suggest methods to help further eliminate chemical storage risks.« less

  16. Rumsey and Walker_AMT_2016_Table 2.xlsx

    EPA Pesticide Factsheets

    Table summarizes instrument precision assessed by collocating the two sample boxes. Precision is quantified as the standard deviation of the residuals of an orthogonal least squares regression of concentrations from the two sample boxes. This allows for an estimation of gradient precision and ultimately gradient and flux detection limits. This dataset is associated with the following publication:Rumsey, I. Application of an online ion chromatography-based instrument for gradient flux measurements of speciated nitrogen and sulfur. ENVIRONMENTAL SCIENCE & TECHNOLOGY. American Chemical Society, Washington, DC, USA, 9(6): 2581-2592, (2016).

  17. Development of Low Cost Filler Materials for Welding High Strength Steels.

    DTIC Science & Technology

    1984-04-29

    solid wire form for use in GMAW and GTAW welding of HY-130, Linde 140S and Airco AXI40. As can be seen from Table 2, they achieve their properties with...as pure powder and ferroalloys, 16 2 ’ Transfer efficiencies of elements (e.g. Nickel, Chromium and Molybdenum) from the electrode to weld metal then...chemical compositions of the deposits (as shown in Table 5) was "lean" in carbon, nickel, manganese and molybdenum but "rich" in chromium , compared to

  18. Web life: Sixty Symbols

    NASA Astrophysics Data System (ADS)

    2009-09-01

    So what is the site about? If you enjoyed The Periodic Table of Videos we profiled earlier this year (January p35), but found it a bit too...well...chemical, then this is the website for you. Physics does not really have a periodic table, so a handful of scientists from Nottingham University in the UK worked with video-journalist Brady Haran to create one. The result is a 6 × 10 matrix of important symbols in physics and astronomy, each linked to a 5-10 min video describing the symbol's significance.

  19. A note on scrap in the 1992 U.S. input-output tables

    USGS Publications Warehouse

    Swisko, George M.

    2000-01-01

    Introduction A key concern of industrial ecology and life cycle analysis is the disposal and recycling of scrap. One might conclude that the U.S. input-output tables are appropriate tools for analyzing scrap flows. Duchin, for instance, has suggested using input-output analysis for industrial ecology, indicating that input-output economics can trace the stocks and flows of energy and other materials from extraction through production and consumption to recycling or disposal. Lave and others use input-output tables to design life cycle assessment models for studying product design, materials use, and recycling strategies, even with the knowledge that these tables suffer from a lack of comprehensive and detailed data that may never be resolved. Although input-output tables can offer general guidance about the interdependence of economic and environmental processes, data reporting by industry and the economic concepts underlying these tables pose problems for rigorous material flow examinations. This is especially true for analyzing the output of scrap and scrap flows in the United States and estimating the amount of scrap that can be recycled. To show how data reporting has affected the values of scrap in recent input-output tables, this paper focuses on metal scrap generated in manufacturing. The paper also briefly discusses scrap that is not included in the input-output tables and some economic concepts that limit the analysis of scrap flows.

  20. 40 CFR 414.31 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS Other Fibers... concentration listed in the following table. Effluent characteristics BPT effluent limitations 1 Maximum for any...

  1. 40 CFR 414.21 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS Rayon Fibers... concentration listed in the following table. Effluent characteristics BPT effluent limitations 1 Maximum for any...

  2. General method and thermodynamic tables for computation of equilibrium composition and temperature of chemical reactions

    NASA Technical Reports Server (NTRS)

    Huff, Vearl N; Gordon, Sanford; Morrell, Virginia E

    1951-01-01

    A rapidly convergent successive approximation process is described that simultaneously determines both composition and temperature resulting from a chemical reaction. This method is suitable for use with any set of reactants over the complete range of mixture ratios as long as the products of reaction are ideal gases. An approximate treatment of limited amounts of liquids and solids is also included. This method is particularly suited to problems having a large number of products of reaction and to problems that require determination of such properties as specific heat or velocity of sound of a dissociating mixture. The method presented is applicable to a wide variety of problems that include (1) combustion at constant pressure or volume; and (2) isentropic expansion to an assigned pressure, temperature, or Mach number. Tables of thermodynamic functions needed with this method are included for 42 substances for convenience in numerical computations.

  3. Olive tree (Olea europaea L.) leaf as a waste by-product of table olive and olive oil industry: a review.

    PubMed

    Şahin, Selin; Bilgin, Mehmet

    2018-03-01

    Research into finding new uses for by-products of table olive and olive oil industry are of great value not only to the economy but also to the environment where olives are grown and to the human health. Since leaves represent around 10% of the total weight of olives arriving at the mill, it is worth obtaining high added-value compounds from those materials for the preparation of dietary supplements, nutraceuticals, functional food ingredients or cosmeceuticals. In this review article, olive tree (Olea europaea L.) leaf is reviewed as being a potential inexpensive, renewable and abundant source of biophenols. The importance of this agricultural and industrial waste is emphasised by means of describing its availability, nutritional and therapeutic effects and studies conducted on this field. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  4. Feasibility Study of Improved Methods for Riverbank Stabilization

    DTIC Science & Technology

    1964-11-01

    hose materials which appear to be technically feasible for such applications are listed in Tables I - 1 and I - 2. I-9 Artificial Riprap...the uncompacted asphalt pavement. Those which 1-11 show the most potential for further study are soil cement, synthetic elastomer sheeting, and...uncompated asphalt pavement. Chemical soil stabilization and metal sheeting are too exp~nsive, and the quality of chemically stabilized soil protection is

  5. Social background of the discovery and the reception of the periodic law of the elements: recognizing the contributions of Dmitri Ivanovich Mendeleev and Julius Lothar Meyer.

    PubMed

    Kaji, Masanori

    2003-05-01

    The favorable and relatively rapid reception of Mendeleev's periodic table of the elements can be attributed, in part at least, to his social connections. These connections were evident in the recently organized Russian Chemical Society. In addition, Mendeleev enjoyed the support of the editorial board of the journal of the German Chemical Society.

  6. The Natural Selection of the Chemical Elements (by R. J. P. Williams and J. J. R. Fraústo da Silva)

    NASA Astrophysics Data System (ADS)

    Kauffman, George B.

    1998-12-01

    Clarendon: New York, 1996. xxvi + 646 pp. Figs., tables. 20.5 x 25.6 cm. ISBN 0-19-855843-0. $80.00. R. J. P. Williams, Royal Society Research Professor Emeritus at Wadham College, Oxford University, and J. J. R. Fraústo da Silva, Professor of Analytical Chemistry at the Instituto Superior Técnico, Universidade Técnica de Lisboa, have collaborated on two previous volumes: New Trends in Bio-inorganic Chemistry (1978) and The Biological Chemistry of the Elements (3rd printing, 1994). Their latest collaborative effort is a book whose ambitious objective is "to show the relationship of every kind of material around us, living and nonliving, to the properties of the chemical elements of the periodic table." The "natural selection" of the chemical elements results from a number of factors, all of which are described in detail. Among these are chemical affinity related to the electronic configuration of their atoms, thermodynamic and kinetic stability, and "functional value to an organisation such as a living system". The physicist's approach to material through phase structure and the phase rule is stressed rather than the chemist's approach through bonding theories. The entire book possesses a strong environmental and interdisciplinary emphasis.

  7. Preliminary Problem Definition Study of 48 Munitions Related Chemicals. Volume I. Explosives Related Chemicals

    DTIC Science & Technology

    1978-04-01

    fungicide additive to prevent chemical "peal burn" in citrus fruits, and in the textile industry for improved shrinkproofing, dye...1967 undiluted oral Rabbits, 3 1.6-1.9 L0100 Treon at al., 1943 "young" *.a. oral mice 2.78 24 hr LD50 Caujolle & Caujolls, 1965 undiluted i.p. Mice 1.35...presented in Table IV-10. In general, che acute toxicity of the methylamines to mammals is fairly low with LD50 ’s averaging several hundred mg/kg

  8. Simulating the influence of groundwater table fluctuation on vapor intrusion

    NASA Astrophysics Data System (ADS)

    Huo, J.

    2017-12-01

    The migration of volatile chemicals from groundwater to an overlying building is a commonly existing phenomenon around the world. Due to the distinction of hydrologic conditions among vapor intrusion sites, it is necessary to consider the effect of dominant hydrologic factors in order to obtain a precise site evaluation and a health risk assessment during the screening process. This study mainly discusses the impact of groundwater table fluctuation and other hydrological factors including porosity, permeability and soil moisture on the vapor intrusion transport. A two-dimensional model is configured to inject different typical volatile organic contaminants from EPA's Vapor Intrusion Database. Through quantifying the contaminant vapor concentration attenuation factors under the effect of groundwater table fluctuation, this study provides suggestions for indoor air sample and vapor intrusion assessment.

  9. Multiple valence superatoms.

    PubMed

    Reveles, J U; Khanna, S N; Roach, P J; Castleman, A W

    2006-12-05

    We recently demonstrated that, in gas phase clusters containing aluminum and iodine atoms, an Al(13) cluster behaves like a halogen atom, whereas an Al(14) cluster exhibits properties analogous to an alkaline earth atom. These observations, together with our findings that Al(13)(-) is inert like a rare gas atom, have reinforced the idea that chosen clusters can exhibit chemical behaviors reminiscent of atoms in the periodic table, offering the exciting prospect of a new dimension of the periodic table formed by cluster elements, called superatoms. As the behavior of clusters can be controlled by size and composition, the superatoms offer the potential to create unique compounds with tailored properties. In this article, we provide evidence of an additional class of superatoms, namely Al(7)(-), that exhibit multiple valences, like some of the elements in the periodic table, and hence have the potential to form stable compounds when combined with other atoms. These findings support the contention that there should be no limitation in finding clusters, which mimic virtually all members of the periodic table.

  10. Maintenance Operations in Mission Oriented Protective Posture Level IV (MOPPIV)

    DTIC Science & Technology

    1987-10-01

    Repair FADAC Printed Circuit Board ............. 6 3. Data Analysis Techniques ............................. 6 a. Multiple Linear Regression... ANALYSIS /DISCUSSION ............................... 12 1. Exa-ple of Regression Analysis ..................... 12 S2. Regression results for all tasks...6 * TABLE 9. Task Grouping for Analysis ........................ 7 "TABXLE 10. Remove/Replace H60A3 Power Pack................. 8 TABLE

  11. RMP Guidance for Chemical Distributors - Table of Contents

    EPA Pesticide Factsheets

    Risk Management Program guidance helps owners and operators of stationary sources to determine if their processes are subject to regulation under section 112(r) of the Clean Air Act and 40 CFR part 68 and to comply with regulations.

  12. Defense Acquisition Workforce Improvement Act (DAWIA) Certification: A Comparative Analysis of Certification Versus Qualification

    DTIC Science & Technology

    2013-09-01

    10 2. EDUCATION .....................................................................................12 3. TRAINING...11 Figure 4. Acquisition Workforce Education Levels FY13 (From DAU...xi LIST OF TABLES Table 1. Education Requirements by Career Field ........................................................13 Table 2. Defense

  13. The table grape 'Victoria' with a long shaped berry: a potential mutation with attractive characteristics for consumers.

    PubMed

    Ferrara, Giuseppe; Gallotta, Alessandra; Pacucci, Carmela; Matarrese, Angela Maria Stella; Mazzeo, Andrea; Giancaspro, Angelica; Gadaleta, Agata; Piazzolla, Francesca; Colelli, Giancarlo

    2017-12-01

    Puglia is the most important region in Italy for table grape production. Since consumers look for new products, the number of table grape varieties has greatly increased in recent years. In a survey in the Puglia region, we identified several years ago a potential mutation of the cv. Victoria. We described this accession in comparison with the standard Victoria for some amphelographic traits. All the characteristics were very similar to the standard Victoria except for the berry shape, which was significantly more elongated. Moreover, the berry of the mutated Victoria showed higher firmness, lightness and chroma than the standard one, with a more intense yellow colour of the skin (appreciated by consumers). The molecular characterisation with 25 SSR markers showed that normal and mutant Victoria were genetically identical at all the analysed loci, thus suggesting that the two accessions could be considered as clones with the difference in berry shape probably due to a somatic mutation. This mutation of the cv. Victoria may have interesting perspective for the market since consumers are always attracted by different shape and colour of the fruits (consumers buy with eyes). This accession can be an alternative clone of the already known standard Victoria. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  14. Measuring efficiency of cotton cultivation in Pakistan: a restricted production frontier study.

    PubMed

    Watto, Muhammad Arif; Mugera, Amin

    2014-11-01

    Massive groundwater pumping for irrigation has started lowering water tables rapidly in different regions of Pakistan. Declining water tables have thus prompted research efforts to improve agricultural productivity and efficiency to make efficient use of scarce water resources. This study employs a restricted stochastic production frontier to estimate the level of, and factors affecting, technical efficiency of groundwater-irrigated cotton farms in the Punjab province of Pakistan. The mean technical efficiency estimates indicate substantial technical inefficiencies among cotton growers. On average, tube-well owners and water buyers can potentially increase cotton production by 19% and 28%, respectively, without increasing the existing input level. The most influential factors affecting technical efficiency positively are the use of improved quality seed, consultation with extension field staff and farmers' perceptions concerning the availability of groundwater resources for irrigation in the future. This study proposes that adopting improved seed for new cotton varieties and providing better extension services regarding cotton production technology would help to achieve higher efficiency in cotton farming. Within the context of falling water tables, educating farmers about the actual crop water requirements and guiding them about groundwater resource availability may also help to achieve higher efficiencies. © 2014 Society of Chemical Industry. © 2014 Society of Chemical Industry.

  15. Applications of Formal Methods to Specification and Safety of Avionics Software

    NASA Technical Reports Server (NTRS)

    Hoover, D. N.; Guaspari, David; Humenn, Polar

    1996-01-01

    This report treats several topics in applications of formal methods to avionics software development. Most of these topics concern decision tables, an orderly, easy-to-understand format for formally specifying complex choices among alternative courses of action. The topics relating to decision tables include: generalizations fo decision tables that are more concise and support the use of decision tables in a refinement-based formal software development process; a formalism for systems of decision tables with behaviors; an exposition of Parnas tables for users of decision tables; and test coverage criteria and decision tables. We outline features of a revised version of ORA's decision table tool, Tablewise, which will support many of the new ideas described in this report. We also survey formal safety analysis of specifications and software.

  16. Treatment of table olive washing water using trickling filters, constructed wetlands and electrooxidation.

    PubMed

    Tatoulis, Triantafyllos; Stefanakis, Alexandros; Frontistis, Zacharias; Akratos, Christos S; Tekerlekopoulou, Athanasia G; Mantzavinos, Dionissios; Vayenas, Dimitrios V

    2017-01-01

    The production of table olives is a significant economic activity in Mediterranean countries. Table olive processing generates large volumes of rinsing water that are characterized by high organic matter and phenol contents. Due to these characteristics, a combination of more than one technology is imperative to ensure efficient treatment with low operational cost. Previously, biological filters were combined with electrooxidation to treat table olive washing water. Although this combination was successful in reducing pollutant loads, its cost could be further reduced. Constructed wetlands could be an eligible treatment method for integrated table olive washing water treatment as they have proved tolerant to high organic matter and phenol loads. Two pilot-scale horizontal subsurface constructed wetlands, one planted and one unplanted, were combined with a biological filter and electrooxidation over a boron-doped diamond anode to treat table olive washing water. In the biological filter inlet, chemical oxygen demand (COD) concentrations ranged from 5500 to 15,000 mg/L, while mean COD influent concentration in the constructed wetlands was 2800 mg/L. The wetlands proved to be an efficient intermediate treatment stage, since COD removal levels for the planted unit reached 99 % (mean 70 %), while the unplanted unit presented removal rates of around 65 %. Moreover, the concentration of phenols in the effluent was typically below 100 mg/L. The integrated trickling filter-constructed wetland-electrooxidation treatment system examined here could mineralize and decolorize table olive washing water and fully remove its phenolic content.

  17. PROXIMAL: a method for Prediction of Xenobiotic Metabolism.

    PubMed

    Yousofshahi, Mona; Manteiga, Sara; Wu, Charmian; Lee, Kyongbum; Hassoun, Soha

    2015-12-22

    Contamination of the environment with bioactive chemicals has emerged as a potential public health risk. These substances that may cause distress or disease in humans can be found in air, water and food supplies. An open question is whether these chemicals transform into potentially more active or toxic derivatives via xenobiotic metabolizing enzymes expressed in the body. We present a new prediction tool, which we call PROXIMAL (Prediction of Xenobiotic Metabolism) for identifying possible transformation products of xenobiotic chemicals in the liver. Using reaction data from DrugBank and KEGG, PROXIMAL builds look-up tables that catalog the sites and types of structural modifications performed by Phase I and Phase II enzymes. Given a compound of interest, PROXIMAL searches for substructures that match the sites cataloged in the look-up tables, applies the corresponding modifications to generate a panel of possible transformation products, and ranks the products based on the activity and abundance of the enzymes involved. PROXIMAL generates transformations that are specific for the chemical of interest by analyzing the chemical's substructures. We evaluate the accuracy of PROXIMAL's predictions through case studies on two environmental chemicals with suspected endocrine disrupting activity, bisphenol A (BPA) and 4-chlorobiphenyl (PCB3). Comparisons with published reports confirm 5 out of 7 and 17 out of 26 of the predicted derivatives for BPA and PCB3, respectively. We also compare biotransformation predictions generated by PROXIMAL with those generated by METEOR and Metaprint2D-react, two other prediction tools. PROXIMAL can predict transformations of chemicals that contain substructures recognizable by human liver enzymes. It also has the ability to rank the predicted metabolites based on the activity and abundance of enzymes involved in xenobiotic transformation.

  18. The Effects of CW (Chemical Warfare)-Related Chemicals on Social Behavior and Performance

    DTIC Science & Technology

    1985-10-01

    Present Mount (no thrusting) Mount (with thrusting) Masturbate .Genital Manipulation (other animal) Genital Sniff (other animal) Other Social Behaviors...battery, although it may not be practical to use it an an everyday basis because of the habituation problem. In September, 1985, a banana pellet dispenser... masturbate , etc.) If two or more animals are observed simultaneously in the open field, the social behaviors listed in Table 2 are also scored for

  19. Heat Treatment and Properties of Iron and Steel

    DTIC Science & Technology

    1966-11-01

    requirements for quenching media are met satisfactorily by water or aqueous solu- tions of inorganic salts such as table salt or caustic soda, or by...organic chemicals and dyestuffs, and a wide variety of inorganic chemicals. Typical applications are for out- door trim, kitchen equipment, dairy...Steel Co., Reading, Pa. (1948) 564 pages. G. A. Roberts, J. C. Hamaker Jr. and A. R. Johnson, Tool steels, 3rd edition, Am. Soc. Metals, Metals Park

  20. Taxicab Correspondence Analysis of Contingency Tables with One Heavyweight Column

    ERIC Educational Resources Information Center

    Choulakian, V.

    2008-01-01

    The aim of this paper is to study the analysis of contingency tables with one heavyweight column or one heavyweight entry by taxicab correspondence analysis (TCA). Given that the mathematics of TCA is simpler than the mathematics of correspondence analysis (CA), the influence of one heavyweight column on the outputs of TCA is studied explicitly…

  1. The discovery of plutonium reorganized the periodic table and aided the discovery of new elements

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Clark, David L

    2009-01-01

    The modern Periodic Table derives principally from the work of the great Russian scientist Dimitri Mendeleev, who in 1869 enunciated a 'periodic law' that the properties of the elements are a periodic function of their atomic weights, and arranged the 65 known elements in a 'periodic table'. Fundamentally, every column in the main body of the Periodic Table is a grouping of elements that display similar chemical and physical behavior. Similar properties are therefore exhibited by elements with widely different mass. Chemical periodicity is central to the study of chemistry, and no other generalization comes close to its ability tomore » systematize and rationalize known chemical facts. With the development of atomic theory, and an understanding of the electronic structure of atoms, chemical periodicity and the periodic table now find their natural explanation in the electronic structure of atoms. Moving from left to right along any row, the elements are arranged sequentially according to nuclear charge (the atomic number). Electrons counter balance that nuclear charge, hence each successive element has one more electron in its configuration. The electron configuration, or distribution of electrons among atomic orbitals, may be determined by application of the Pauli principle (paired spin in the same orbital) and the aufbau principle (which outlines the order of filling of electrons into shells of orbitals - s, p, d, f, etc.) such that in a given atom, no two electrons may have all four quantum numbers identical. In 1939, only three elements were known to be heavier than actinium: thorium, protactinium, and uranium. All three exhibited variable oxidation states and a complex chemistry. Thorium, protactinium and uranium were assumed to be d-transition metals and were placed in the Periodic Table under hafnium, tantalum, and tungsten, respectively. By 1940, McMillan and Abelson bombarded uranium atoms with slow neutrons and successfully identified atoms of element 93, which they named neptunium after the planet Neptune. This rapidly set the stage for the discovery of the next succeeding element, plutonium (Seaborg, McMillan, Kennedy, and Wahl, 1940), named after the next planet away from the Sun, Pluto. The newly discovered elements were presumed to fit comfortably in the Periodic Table under rhenium and osmium, respectively. However, subsequent tracer chemical experiments showed that neptunium and plutonium were closer in their chemical properties to uranium than their presumed homologues, rhenium and osmium. Spectroscopic evidence also indicated that the new elements were not typical transition elements, but had f-electrons in their valence shell. Thus, several researchers, including McMillan and Wahl, and Zachariasen at Los Alamos, suggested that these elements might be part of a second inner-transition series in which the 5f-electron subshell was being filled. It was not clear, however, where the new series would begin. McMillian had proposed a 'uraninide series' that started with neptunium, but attempts to isolate elements with atomic numbers 95 and 96 based on assumed similarities to uranium were unsuccessful. Both Wahl and Zacharias en had proposed a thoride series that started with protactinium. In 1944, Seaborg proposed that the series started with thorium, and that all of the elements heavier than actinium constituted an 'actinide' series similar to the lanthanides. Because the 5f-shell began filling in the same relative position as the 4f-shell, the electronic configuration of elements in the two series would be similar. Guided by the hypothesis that elements 95 and 96 were homologues of europium and gadolinium, new experiments were designed and the elements were uniquely synthesized and separated from all others. The new elements were subsequently named americium and curium. Seaborg's 'Actinide Concept' thus played a major role in the discovery of the transplutonium elements. It provided the framework that supported synthesis, isolation, and identification of the succeeding actinide elements berkelium through lawrencium and beyond to the element with Atomic Number 118. But as research has progressed in the study of the actinide elements, it has become clear that the 5f series has a unique chemistry that is distinct from the lanthanides. One of the focal points of study in actinide research has been to better define the scope and limitations of the actinide concept. Seaborg's actinide concept of heavy element electronic structure, prediction that the actinides form a transition series analogous to the rare earth series of lanthanide elements, is now well accepted in the scientific community and included in all standard configurations of the Periodic Table.« less

  2. Structural Analysis of Technical-Tactical Elements in Table Tennis and their Role in Different Playing Zones

    PubMed Central

    Munivrana, Goran; Petrinović, Lidija Zekan; Kondrič, Miran

    2015-01-01

    For the purpose of determining the overall structure of technical-tactical elements in table tennis and evaluating their role in different playing zones around the table, a new measuring instrument (a questionnaire) was formulated that took advantage of the expert knowledge of top, world class table tennis coaches. The results of the hierarchical taxonomic (cluster) analysis showed that the overall structure of the technical-tactical elements forming the table tennis technique could be divided into three basic groups; a group of technical-tactical elements (A) used in the phase of preparing one’s own and disabling the opponent’s attack; a group of technical-tactical elements (B) used in the phase of attack and counterattack; and a group of technical-tactical elements (C) used in the phase of defense. The differences among the obtained groups of table tennis elements were determined by applying the Kruskal-Wallis test, while relations between the groups and their role in different playing zones around the table were analyzed by comparing the average values of the experts’ scores. PMID:26557204

  3. Structural Analysis of Technical-Tactical Elements in Table Tennis and their Role in Different Playing Zones.

    PubMed

    Munivrana, Goran; Petrinović, Lidija Zekan; Kondrič, Miran

    2015-09-29

    For the purpose of determining the overall structure of technical-tactical elements in table tennis and evaluating their role in different playing zones around the table, a new measuring instrument (a questionnaire) was formulated that took advantage of the expert knowledge of top, world class table tennis coaches. The results of the hierarchical taxonomic (cluster) analysis showed that the overall structure of the technical-tactical elements forming the table tennis technique could be divided into three basic groups; a group of technical-tactical elements (A) used in the phase of preparing one's own and disabling the opponent's attack; a group of technical-tactical elements (B) used in the phase of attack and counterattack; and a group of technical-tactical elements (C) used in the phase of defense. The differences among the obtained groups of table tennis elements were determined by applying the Kruskal-Wallis test, while relations between the groups and their role in different playing zones around the table were analyzed by comparing the average values of the experts' scores.

  4. Aroma characterization based on aromatic series analysis in table grapes

    PubMed Central

    Wu, Yusen; Duan, Shuyan; Zhao, Liping; Gao, Zhen; Luo, Meng; Song, Shiren; Xu, Wenping; Zhang, Caixi; Ma, Chao; Wang, Shiping

    2016-01-01

    Aroma is an important part of quality in table grape, but the key aroma compounds and the aroma series of table grapes remains unknown. In this paper, we identified 67 aroma compounds in 20 table grape cultivars; 20 in pulp and 23 in skin were active compounds. C6 compounds were the basic background volatiles, but the aroma contents of pulp juice and skin depended mainly on the levels of esters and terpenes, respectively. Most obviously, ‘Kyoho’ grapevine series showed high contents of esters in pulp, while Muscat/floral cultivars showed abundant monoterpenes in skin. For the aroma series, table grapes were characterized mainly by herbaceous, floral, balsamic, sweet and fruity series. The simple and visualizable aroma profiles were established using aroma fingerprints based on the aromatic series. Hierarchical cluster analysis (HCA) and principal component analysis (PCA) showed that the aroma profiles of pulp juice, skin and whole berries could be classified into 5, 3, and 5 groups, respectively. Combined with sensory evaluation, we could conclude that fatty and balsamic series were the preferred aromatic series, and the contents of their contributors (β-ionone and octanal) may be useful as indicators for the improvement of breeding and cultivation measures for table grapes. PMID:27487935

  5. 49 CFR 178.68 - Specification 4E welded aluminum cylinders.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...: Table 1—Authorized Materials Designation Chemical analysis—limits in percent 5154 1 Iron plus silicon 0... Section 178.68 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS...

  6. 40 CFR Table 5 to Subpart U of... - Known Organic HAP Emitted From the Production of Elastomer Products

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... products] Organic HAP/Chemical name (CAS No.) Elastomer product/subcategory BR EPI EPR HYP NEO NBL NBR PBR.... NEO = Neoprene. NBL = Nitrile Butadiene Latex. NBR = Nitrile Butadiene Rubber. PBR/SBRS...

  7. 40 CFR Table 5 to Subpart U of... - Known Organic HAP Emitted From the Production of Elastomer Products

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... products] Organic HAP/Chemical name (CAS No.) Elastomer product/subcategory BR EPI EPR HYP NEO NBL NBR PBR.... NEO = Neoprene. NBL = Nitrile Butadiene Latex. NBR = Nitrile Butadiene Rubber. PBR/SBRS...

  8. 40 CFR Table 5 to Subpart U of... - Known Organic HAP Emitted From the Production of Elastomer Products

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... products] Organic HAP/Chemical name (CAS No.) Elastomer product/subcategory BR EPI EPR HYP NEO NBL NBR PBR.... NEO = Neoprene. NBL = Nitrile Butadiene Latex. NBR = Nitrile Butadiene Rubber. PBR/SBRS...

  9. 40 CFR Table 5 to Subpart U of... - Known Organic HAP Emitted From the Production of Elastomer Products

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... products] Organic HAP/Chemical name (CAS No.) Elastomer product/subcategory BR EPI EPR HYP NEO NBL NBR PBR.... NEO = Neoprene. NBL = Nitrile Butadiene Latex. NBR = Nitrile Butadiene Rubber. PBR/SBRS...

  10. Identifying and Analyzing Federal Government Market Opportunities for OpalSoft

    DTIC Science & Technology

    2004-09-01

    OPPORTUNITIES, AND THREATS ( SWOT ) ANALYSIS......................................................................................13 1. Strengths...xiii LIST OF TABLES Table 1. SWOT Analysis...of industries to include Fortune 500 companies. Current key clients are Amkor, Symantec, Unisys Corporation, Apple Computers, Palm, Inc., and

  11. [Hazard function and life table: an introduction to the failure time analysis].

    PubMed

    Matsushita, K; Inaba, H

    1987-04-01

    Failure time analysis has become popular in demographic studies. It can be viewed as a part of regression analysis with limited dependent variables as well as a special case of event history analysis and multistate demography. The idea of hazard function and failure time analysis, however, has not been properly introduced to nor commonly discussed by demographers in Japan. The concept of hazard function in comparison with life tables is briefly described, where the force of mortality is interchangeable with the hazard rate. The basic idea of failure time analysis is summarized for the cases of exponential distribution, normal distribution, and proportional hazard models. The multiple decrement life table is also introduced as an example of lifetime data analysis with cause-specific hazard rates.

  12. Electronic and rovibrational quantum chemical analysis of C3P-: the next interstellar anion?

    NASA Astrophysics Data System (ADS)

    Fortenberry, Ryan C.; Lukemire, Joseph A.

    2015-11-01

    C3P- is analogous to the known interstellar anion C3N- with phosphorus replacing nitrogen in a simple step down the periodic table. In this work, it is shown that C3P- is likely to possess a dipole-bound excited state. It has been hypothesized and observationally supported that dipole-bound excited states are an avenue through which anions could be formed in the interstellar medium. Additionally, C3P- has a valence excited state that may lead to further stabilization of this molecule, and C3P- has a larger dipole moment than neutral C3P (˜6 D versus ˜4 D). As such, C3P- is probably a more detectable astromolecule than even its corresponding neutral radical. Highly accurate quantum chemical quartic force fields are also applied to C3P- and its singly 13C substituted isotopologues in order to provide structures, vibrational frequencies, and spectroscopic constants that may aid in its detection.

  13. Analysis of the Korean Navy Selection Process for the Naval Post Graduate School

    DTIC Science & Technology

    1988-06-01

    OUTCOME OF ECL TESTING SCORE..........................54 C. OUTCOME OF TOEFL TESTING SCORE.......................55 D. PLOT OF NPS GRADE WITH ECL...TESTING SCORE..............55 E. PLOT OF NPS GRADE WIHT NA GRADE......................56 F. PLOT OF NPS GRADE WITH TOEFL TESTING SCORE............56...OF ECL TESTING SCORE ............. 30 Table S. EXPECTANCY TABLE OF NAG ............................ 31 Table 9. EXPECTANCY TABLE OF TOEFL TESTING SCORE

  14. Sensor Technology Baseline Study for Enabling Condition Based Maintenance Plus in Army Ground Vehicles

    DTIC Science & Technology

    2012-03-01

    for enabling condition based maintenance plus in Army ground vehicles. The sensor study was driven from Failure Mode Effects Analysis ( FMEA ...of Tables Table 1. Sensor technology baseline study based on engine FMEA report. ...................................5 Table 2. Sensor technology...baseline study based on transmission FMEA report. .........................8 Table 3. Sensor technology baseline study based on alternator FMEA report

  15. iTTVis: Interactive Visualization of Table Tennis Data.

    PubMed

    Wu, Yingcai; Lan, Ji; Shu, Xinhuan; Ji, Chenyang; Zhao, Kejian; Wang, Jiachen; Zhang, Hui

    2018-01-01

    The rapid development of information technology paved the way for the recording of fine-grained data, such as stroke techniques and stroke placements, during a table tennis match. This data recording creates opportunities to analyze and evaluate matches from new perspectives. Nevertheless, the increasingly complex data poses a significant challenge to make sense of and gain insights into. Analysts usually employ tedious and cumbersome methods which are limited to watching videos and reading statistical tables. However, existing sports visualization methods cannot be applied to visualizing table tennis competitions due to different competition rules and particular data attributes. In this work, we collaborate with data analysts to understand and characterize the sophisticated domain problem of analysis of table tennis data. We propose iTTVis, a novel interactive table tennis visualization system, which to our knowledge, is the first visual analysis system for analyzing and exploring table tennis data. iTTVis provides a holistic visualization of an entire match from three main perspectives, namely, time-oriented, statistical, and tactical analyses. The proposed system with several well-coordinated views not only supports correlation identification through statistics and pattern detection of tactics with a score timeline but also allows cross analysis to gain insights. Data analysts have obtained several new insights by using iTTVis. The effectiveness and usability of the proposed system are demonstrated with four case studies.

  16. Estimated Depth to Ground Water and Configuration of the Water Table in the Portland, Oregon Area

    USGS Publications Warehouse

    Snyder, Daniel T.

    2008-01-01

    Reliable information on the configuration of the water table in the Portland metropolitan area is needed to address concerns about various water-resource issues, especially with regard to potential effects from stormwater injection systems such as UIC (underground injection control) systems that are either existing or planned. To help address these concerns, this report presents the estimated depth-to-water and water-table elevation maps for the Portland area, along with estimates of the relative uncertainty of the maps and seasonal water-table fluctuations. The method of analysis used to determine the water-table configuration in the Portland area relied on water-level data from shallow wells and surface-water features that are representative of the water table. However, the largest source of available well data is water-level measurements in reports filed by well constructors at the time of new well installation, but these data frequently were not representative of static water-level conditions. Depth-to-water measurements reported in well-construction records generally were shallower than measurements by the U.S. Geological Survey (USGS) in the same or nearby wells, although many depth-to-water measurements were substantially deeper than USGS measurements. Magnitudes of differences in depth-to-water measurements reported in well records and those measured by the USGS in the same or nearby wells ranged from -119 to 156 feet with a mean of the absolute value of the differences of 36 feet. One possible cause for the differences is that water levels in many wells reported in well records were not at equilibrium at the time of measurement. As a result, the analysis of the water-table configuration relied on water levels measured during the current study or used in previous USGS investigations in the Portland area. Because of the scarcity of well data in some areas, the locations of select surface-water features including major rivers, streams, lakes, wetlands, and springs representative of where the water table is at land surface were used to augment the analysis. Ground-water and surface-water data were combined for use in interpolation of the water-table configuration. Interpolation of the two representations typically used to define water-table position - depth to the water table below land surface and elevation of the water table above a datum - can produce substantially different results and may represent the end members of a spectrum of possible interpolations largely determined by the quantity of recharge and the hydraulic properties of the aquifer. Datasets of depth-to-water and water-table elevation for the current study were interpolated independently based on kriging as the method of interpolation with parameters determined through the use of semivariograms developed individually for each dataset. Resulting interpolations were then combined to create a single, averaged representation of the water-table configuration. Kriging analysis also was used to develop a map of relative uncertainty associated with the values of the water-table position. Accuracy of the depth-to-water and water-table elevation maps is dependent on various factors and assumptions pertaining to the data, the method of interpolation, and the hydrogeologic conditions of the surficial aquifers in the study area. Although the water-table configuration maps generally are representative of the conditions in the study area, the actual position of the water-table may differ from the estimated position at site-specific locations, and short-term, seasonal, and long-term variations in the differences also can be expected. The relative uncertainty map addresses some but not all possible errors associated with the analysis of the water-table configuration and does not depict all sources of uncertainty. Depth to water greater than 300 feet in the Portland area is limited to parts of the Tualatin Mountains, the foothills of the Cascade Range, and muc

  17. Production development of organic nonflammable spacecraft potting encapsulating and conformal coating compounds. Volume 2: Tables

    NASA Technical Reports Server (NTRS)

    Lieberman, S. L.

    1974-01-01

    Tables are presented which include: material properties; elemental analysis; silicone RTV formulations; polyester systems and processing; epoxy preblends and processing; urethane materials and processing; epoxy-urethanes elemental analysis; flammability test results, and vacuum effects.

  18. Proceedings of the U.S. Army Chemical Research, Development and Engineering Center Scientific Conference on Chemical Defense Research Held in Aberdeen Proving Ground, Maryland on 14-17 November 1989

    DTIC Science & Technology

    1990-08-01

    to react in a similar electrochemical manner to the agent 2,21- dichlorodiethylsulfide (Mustard gas or HD). As a simulant for the nerve agents ...attack which may permit effective discrimination of pesticides from nerve agents in a chemical agent detector. Table 1 shows the results of film badge...amount of CASARM agent ( GA , GB, HD or VX) was placed into a 5 mm O.D. Pyrex NMR tube and 1.0 ml of the decontaminating solution was added. The tube was

  19. Chemical properties and colors of fermenting materials in salmon fish sauce production.

    PubMed

    Nakano, Mitsutoshi; Sagane, Yoshimasa; Koizumi, Ryosuke; Nakazawa, Yozo; Yamazaki, Masao; Watanabe, Toshihiro; Takano, Katsumi; Sato, Hiroaki

    2018-02-01

    This data article reports the chemical properties (moisture, pH, salinity, and soluble solid content) and colors of fermenting materials in salmon fish sauce products. The fish sauce was produced by mixing salt with differing proportions of raw salmon materials and fermenting for three months; the salmon materials comprised flesh, viscera, an inedible portion, and soft roe. Chemical properties and colors of the unrefined fish sauce ( moromi ), and the refined fish sauce, were analyzed at one, two, and three months following the start of fermentation. Data determined for all products are provided in table format.

  20. A comparison of hierarchical cluster analysis and league table rankings as methods for analysis and presentation of district health system performance data in Uganda.

    PubMed

    Tashobya, Christine K; Dubourg, Dominique; Ssengooba, Freddie; Speybroeck, Niko; Macq, Jean; Criel, Bart

    2016-03-01

    In 2003, the Uganda Ministry of Health introduced the district league table for district health system performance assessment. The league table presents district performance against a number of input, process and output indicators and a composite index to rank districts. This study explores the use of hierarchical cluster analysis for analysing and presenting district health systems performance data and compares this approach with the use of the league table in Uganda. Ministry of Health and district plans and reports, and published documents were used to provide information on the development and utilization of the Uganda district league table. Quantitative data were accessed from the Ministry of Health databases. Statistical analysis using SPSS version 20 and hierarchical cluster analysis, utilizing Wards' method was used. The hierarchical cluster analysis was conducted on the basis of seven clusters determined for each year from 2003 to 2010, ranging from a cluster of good through moderate-to-poor performers. The characteristics and membership of clusters varied from year to year and were determined by the identity and magnitude of performance of the individual variables. Criticisms of the league table include: perceived unfairness, as it did not take into consideration district peculiarities; and being oversummarized and not adequately informative. Clustering organizes the many data points into clusters of similar entities according to an agreed set of indicators and can provide the beginning point for identifying factors behind the observed performance of districts. Although league table ranking emphasize summation and external control, clustering has the potential to encourage a formative, learning approach. More research is required to shed more light on factors behind observed performance of the different clusters. Other countries especially low-income countries that share many similarities with Uganda can learn from these experiences. © The Author 2015. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

  1. A comparison of hierarchical cluster analysis and league table rankings as methods for analysis and presentation of district health system performance data in Uganda†

    PubMed Central

    Tashobya, Christine K; Dubourg, Dominique; Ssengooba, Freddie; Speybroeck, Niko; Macq, Jean; Criel, Bart

    2016-01-01

    In 2003, the Uganda Ministry of Health introduced the district league table for district health system performance assessment. The league table presents district performance against a number of input, process and output indicators and a composite index to rank districts. This study explores the use of hierarchical cluster analysis for analysing and presenting district health systems performance data and compares this approach with the use of the league table in Uganda. Ministry of Health and district plans and reports, and published documents were used to provide information on the development and utilization of the Uganda district league table. Quantitative data were accessed from the Ministry of Health databases. Statistical analysis using SPSS version 20 and hierarchical cluster analysis, utilizing Wards’ method was used. The hierarchical cluster analysis was conducted on the basis of seven clusters determined for each year from 2003 to 2010, ranging from a cluster of good through moderate-to-poor performers. The characteristics and membership of clusters varied from year to year and were determined by the identity and magnitude of performance of the individual variables. Criticisms of the league table include: perceived unfairness, as it did not take into consideration district peculiarities; and being oversummarized and not adequately informative. Clustering organizes the many data points into clusters of similar entities according to an agreed set of indicators and can provide the beginning point for identifying factors behind the observed performance of districts. Although league table ranking emphasize summation and external control, clustering has the potential to encourage a formative, learning approach. More research is required to shed more light on factors behind observed performance of the different clusters. Other countries especially low-income countries that share many similarities with Uganda can learn from these experiences. PMID:26024882

  2. Chemical and Isotopic Characterization of Surface Water and Active Layer Pore Water in a Tundra Landscape, Barrow, Alaska, USA

    NASA Astrophysics Data System (ADS)

    Newman, B. D.; Heikoop, J. M.; Throckmorton, H.; Arendt, C. A.; Graham, D. E.; Wilson, C. J.; Wullschleger, S. D.

    2016-12-01

    Studies conducted in the Barrow Environmental Observatory as part of the Next Generation Ecosystem Experiment (NGEE) - Arctic have demonstrated significant chemical and isotopic variability in surface water and active layer pore water of polygonal terrain located between drained thaw lake basins (DTLBs). In this study, we report on chemical and isotopic variation at the broader landscape scale that includes different age DTLBs and associated drainages, extant thaw lakes, and interlake regions. Fingerprint diagrams of major elements show a broader range of variation at the landscape scale relative to polygonal terrain. ANOVA analysis suggests that many of the polygonal and broader landscape scale sites have similar chemistry, suggesting a reasonably high degree of hydrologic connectivity. The most significant site-specific differences include higher d18O and d2H, indicative of evaporative conditions, of surface and active layer water from an ancient (2000- 5500 BP) DTLB that comprises a shallow basin with no outlets. Significantly higher Cl, Ca, Fe, Mg, Na, As, Mn and Sr concentrations were also found in pore waters collected immediately above the frost table at two locations. The first location is a small drainage leading from an area of polygonal terrain into an adjacent slough, while the second is upgradient of the estuarine terminus of a drainage sourced from a medium-aged DTLB (50- 300 BP). Higher concentrations at the frost table suggests a mechanism related to periodic freezing and thawing of the transition zone above permafrost or permafrost degradation. Alternative conceptual models, including the presence of a marine signal or the influence of cryopegs (brine layers within permafrost), will also be considered. Characterization of present day Arctic hydrology and chemistry at different scales is important for Earth Systems Models and for predicting hydrogeochemical change associated with landscape evolution due to future permafrost degradation.

  3. Adding Another Dimension With Holography.

    ERIC Educational Resources Information Center

    McNair, Rita H.; Rice, Dale R.

    1984-01-01

    Provides instructions for preparing, processing, and viewing single-beam reflection holograms in science classrooms. Indicates that the process is simple to demonstrate and moderate in cost. A description of the required equipment (optics table, laser, mirrors, lens, filmholder/plateholder, recording materials, and darkroom chemicals/equipment) is…

  4. Data on the weights, specific gravities and chemical compositions of potato (Solanum tuberosum) tubers for food processing from different areas of Hokkaido, Japan.

    PubMed

    Sato, Hiroaki; Koizumi, Ryosuke; Nakazawa, Yozo; Yamazaki, Masao; Itoyama, Ryuichi; Ichisawa, Megumi; Negichi, Junko; Sakuma, Rui; Furusho, Tadasu; Sagane, Yoshimasa; Takano, Katsumi

    2017-04-01

    This data article provides the weights, specific gravities and chemical compositions (moisture, protein, fat, ash, and carbohydrate) of potato tubers, for food processing use, from the Tokachi, Kamikawa and Abashiri areas of Hokkaido, Japan. Potato tubers of four cultivars ('Toyoshiro', 'Kitahime', 'Snowden' and 'Poroshiri') were employed in the current study. The weights and specific gravities of potato tubers from each cultivar, harvested from three areas, were measured, and those of near average weight and specific gravity from each group were analyzed for their chemical composition. In this article, weight, specific gravity, and chemical composition data are provided in tables.

  5. Symposium on Toxic Substance Control: Decontamination, April 22 - 24, 1980, Columbus, Ohio.

    DTIC Science & Technology

    1981-06-01

    standard decontaminants is used. TABLE 1. Standard Chemical Decontaminants Decontaminant Agents Used On STB Blister and nerve agents DS-2 All chemical... agents M258 Kit Sodium Hydroxide, Ethanol, G-Series nerve agents Phenol, Water Chloramine B, ZnCI2, Blister ana V-Series Ethanol, Water nerve agents A...is a point source alarm that actively samples ambient air and reacts to low concentrations of nerve agents . The M-8 alarm detector also detects several

  6. Chemical and Photochemical Reactivity in Microemulsions and Waterless Microemulsions.

    DTIC Science & Technology

    1988-02-10

    virtually the same as that found in the alcohol rich microemulsion A. This value is also close to that found in pure butanol (= 5.0 - table I). It would...formamide or alcohol rich). RESEARCH PATTERN -Supplementing the physical chemical study of the microemulsion medium involving ionic surfactants with density...SAMII (1/02/1988) Ii&N 3 Part II - OXYDATIONS BY HYDROPEROXIDES IN MICROEMULSIONS E. OLIVEROS and M.T. MAURETTE During the past six months, the financial

  7. Multi Service Tactics, Techniques, and Procedures for Treatment of Chemical Warfare Agent Casualties and Conventional Military Chemical Injuries

    DTIC Science & Technology

    2016-08-02

    at mechanical ventilation of a severely exposed casualty until atropine takes effect . Administering supplemental oxygen as available. Chapter 3 3-10...Scavengers; hydroxocobalamin, and dicobalt edetate (2) Provision of S-Groups, thiosulfate (3) Assisted ventilation (4) Oxygen cyanogen... temperature index for light work. Refer to table 1-3 on page 1-12 for work and rest cycles and also water consumption chart. Chapter 1 1-12 ATP 4

  8. Biomarkers of Exposure to Toxic Substances. Volume 2: Genomics: Unique Patterns of Differential Gene Expression and Pathway Perturbation Resulting from Exposure to Nephrotoxins with Regional Specific Toxicity

    DTIC Science & Technology

    2009-05-01

    of chemicals agents . Changes in gene expression are among the most sensitive indicators of chemical exposure. Toxicogenomics, which is based on DNA...assessing gene expression changes and subsequently the mechanism of renal injury following exposure to nephrotoxins selected for their regional...Serine Treatment on Selected Serum Chemistry Parameters ........................ 8 Table 4: Effect of PUR Treatment on Selected Serum Chemistry

  9. Data from a thick unsaturated zone underlying Oro Grande and Sheep Creek washes in the western part of the Mojave Desert, near Victorville, San Bernardino County, California

    USGS Publications Warehouse

    Izbicki, John A.; Clark, Dennis A.; Pimental, Maria I.; Land, Michael; Radyk, John C.; Michel, Robert L.

    2000-01-01

    This report presents data on the physical properties of unsaturated alluvial deposits and on the chemical and isotopic composition of soil water and soil gas collected at 12 monitoring sites in the western part of the Mojave Desert, near Victorville, California. Sites were installed using the ODEX air-hammer method. Seven sites were located in the active channels of Oro Grande and Sheep Creek Washes. The remaining five sites were located away from the active washes. Most sites were drilled to a depth of about 100 feet below land surface; two sites were drilled to the water table almost 650 feet below land surface. Drilling procedures, lithologic and geophysical data, and site construction and instrumentation are described. Core material was analyzed for water content, bulk density, water potential, particle size, and water retention. The chemical composition of leachate from almost 1,000 subsamples of cores and cuttings was determined. Water extracted from selected subsamples of cores was analyzed for tritium and the stable isotopes of oxygen and hydrogen. Water from suction-cup lysimeters and soil-gas samples also were analyzed for chemical and isotopic composition. In addition, data on the chemical and isotopic composition of bulk precipitation from five sites and on ground water from two water-table wells are reported.

  10. Correlation between physics A-levels/A-levels and degree performance

    NASA Astrophysics Data System (ADS)

    Chadwick, Roy

    1985-09-01

    The author presents an analysis of 178 students who left Solihull Sixth form College between 1975 and 1981 to do a degree in physics (approximately one third) or engineering (approximately two thirds) at university or polytechnic. The first table is an analysis of physics A-level grade and degree performance; the second table an analysis of the points total for physics A-level plus maths A-level (five for A, four for B, etc.), against degree performances, and the final table an analysis of the points total for physics A-level plus maths A-level plus third A-level (again five for A, four for B, etc.), against degree performance.

  11. The Effects of Supply Chain Orientation, Supply Chain Management, and Collaboration on Perceived Firm Performance

    DTIC Science & Technology

    2012-06-01

    Communalities – Factor Analysis .................................................................... 30 Table 3. Total Variance Explained – Factor Analysis...43 Table 12. Pearson Correlation...standards of corporate values and allying oneself with exchange partners having similar values, (3) communicating valuable information, including

  12. Catalog of Mount St. Helens 2004-2007 Dome Samples with Major- and Trace-Element Chemistry

    USGS Publications Warehouse

    Thornber, Carl R.; Pallister, John S.; Rowe, Michael C.; McConnell, Siobhan; Herriott, Trystan M.; Eckberg, Alison; Stokes, Winston C.; Cornelius, Diane Johnson; Conrey, Richard M.; Hannah, Tammy; Taggart, Joseph E.; Adams, Monique; Lamothe, Paul J.; Budahn, James R.; Knaack, Charles M.

    2008-01-01

    Sampling and analysis of eruptive products at Mount St. Helens is an integral part of volcano monitoring efforts conducted by the U.S. Geological Survey?s Cascades Volcano Observatory (CVO). The objective of our eruption sampling program is to enable petrological assessments of pre-eruptive magmatic conditions, critical for ascertaining mechanisms for eruption triggering and forecasting potential changes in eruption behavior. This report provides a catalog of near-vent lithic debris and new dome-lava collected during 34 intra-crater sampling forays throughout the October 2004 to October 2007 (2004?7) eruptive interval at Mount St. Helens. In addition, we present comprehensive bulk-rock geochemistry for a time-series of representative (2004?7) eruption products. This data, along with that in a companion report on Mount St. Helens 2004 to 2006 tephra by Rowe and others (2008), are presented in support of the contents of the U.S. Geological Survey Professional Paper 1750 (Sherrod and others, eds., 2008). Readers are referred to appropriate chapters in USGS Professional Paper 1750 for detailed narratives of eruptive activity during this time period and for interpretations of sample characteristics and geochemical data. The suite of rock samples related to the 2004?7 eruption of Mount St. Helens and presented in this catalog are archived at the David A. Johnson Cascades Volcano Observatory, Vancouver, Wash. The Mount St. Helens 2004?7 Dome Sample Catalogue with major- and trace-element geochemistry is tabulated in 3 worksheets of the accompanying Microsoft Excel file, of2008-1130.xls. Table 1 provides location and sampling information. Table 2 presents sample descriptions. In table 3, bulk-rock major and trace-element geochemistry is listed for 44 eruption-related samples with intra-laboratory replicate analyses of 19 dacite lava samples. A brief overview of the collection methods and lithology of dome samples is given below as an aid to deciphering the dome sample catalog. This is followed by an explanation of the categories of sample information (column headers) in Tables 1 and 2. A summary of the analytical methods used to obtain the geochemical data in this report introduces the presentation of major- and trace-element geochemistry of 2004?7 Mount St. Helens dome samples in table 3. Intra-laboratory results for the USGS AGV-2 standard are presented (tables 4 and 5), which demonstrate the compatibility of chemical data from different sources.

  13. Analysis of underlying and multiple-cause mortality data: the life table methods.

    PubMed

    Moussa, M A

    1987-02-01

    The stochastic compartment model concepts are employed to analyse and construct complete and abbreviated total mortality life tables, multiple-decrement life tables for a disease, under the underlying and pattern-of-failure definitions of mortality risk, cause-elimination life tables, cause-elimination effects on saved population through the gain in life expectancy as a consequence of eliminating the mortality risk, cause-delay life tables designed to translate the clinically observed increase in survival time as the population gain in life expectancy that would occur if a treatment protocol was made available to the general population and life tables for disease dependency in multiple-cause data.

  14. Determining the composition of gold nanoparticles: a compilation of shapes, sizes, and calculations using geometric considerations.

    PubMed

    Mori, Taizo; Hegmann, Torsten

    2016-01-01

    Size, shape, overall composition, and surface functionality largely determine the properties and applications of metal nanoparticles. Aside from well-defined metal clusters, their composition is often estimated assuming a quasi-spherical shape of the nanoparticle core. With decreasing diameter of the assumed circumscribed sphere, particularly in the range of only a few nanometers, the estimated nanoparticle composition increasingly deviates from the real composition, leading to significant discrepancies between anticipated and experimentally observed composition, properties, and characteristics. We here assembled a compendium of tables, models, and equations for thiol-protected gold nanoparticles that will allow experimental scientists to more accurately estimate the composition of their gold nanoparticles using TEM image analysis data. The estimates obtained from following the routines described here will then serve as a guide for further analytical characterization of as-synthesized gold nanoparticles by other bulk (thermal, structural, chemical, and compositional) and surface characterization techniques. While the tables, models, and equations are dedicated to gold nanoparticles, the composition of other metal nanoparticle cores with face-centered cubic lattices can easily be estimated simply by substituting the value for the radius of the metal atom of interest.

  15. VizieR Online Data Catalog: Period-mass-loss rate relation of Miras (Uttenthaler, 2013)

    NASA Astrophysics Data System (ADS)

    Uttenthaler, S.

    2013-06-01

    Table 1 is a collection of information on the technetium (Tc) content, pulsation period, and IR photometry of AGB variables, without claim of completeness, in particular for the semi-regular variables (SRVs). Up to three references on the Tc content are given. The pulsation period is the most up-to-date value possible, for many objects based on an analysis of AAVSO data with the Period04 program (Lenz & Breger, 2005CoAst.146...53L). The spectral (or chemical) type of the star is taken from the same literature as the information on Tc. A mean K magnitude and J-K colour is computed from all available literature, as listed in Sect. 2 of the paper; they are meant to be as close as possible to cycle-averaged values, to average out the variability of the objects. Finally, magnitudes are given in the IRAS 12, 25, and 60 micron bands, Akari 9 and 18 micron bands, and WISE 22 micron bands are given, where fluxes have been converted to magnitudes given the zero-magnitude fluxes as given in the Note to Table 1. (1 data file).

  16. Mapping Chemical Selection Pathways for Designing Multicomponent Alloys: an informatics framework for materials design.

    PubMed

    Srinivasan, Srikant; Broderick, Scott R; Zhang, Ruifeng; Mishra, Amrita; Sinnott, Susan B; Saxena, Surendra K; LeBeau, James M; Rajan, Krishna

    2015-12-18

    A data driven methodology is developed for tracking the collective influence of the multiple attributes of alloying elements on both thermodynamic and mechanical properties of metal alloys. Cobalt-based superalloys are used as a template to demonstrate the approach. By mapping the high dimensional nature of the systematics of elemental data embedded in the periodic table into the form of a network graph, one can guide targeted first principles calculations that identify the influence of specific elements on phase stability, crystal structure and elastic properties. This provides a fundamentally new means to rapidly identify new stable alloy chemistries with enhanced high temperature properties. The resulting visualization scheme exhibits the grouping and proximity of elements based on their impact on the properties of intermetallic alloys. Unlike the periodic table however, the distance between neighboring elements uncovers relationships in a complex high dimensional information space that would not have been easily seen otherwise. The predictions of the methodology are found to be consistent with reported experimental and theoretical studies. The informatics based methodology presented in this study can be generalized to a framework for data analysis and knowledge discovery that can be applied to many material systems and recreated for different design objectives.

  17. Valorization of titanium metal wastes as tanning agent used in leather industry.

    PubMed

    Crudu, Marian; Deselnicu, Viorica; Deselnicu, Dana Corina; Albu, Luminita

    2014-10-01

    The development of new tanning agents and new technologies in the leather sector is required to cope with the increasingly higher environmental pressure on the current tanning materials and processes such as tanning with chromium salts. In this paper, the use of titanium wastes (cuttings) resulting from the process of obtaining highly pure titanium (ingots), for the synthesis of new tanning agent and tanning bovine hides with new tanning agent, as alternative to tanning with chromium salts are investigated. For this purpose, Ti waste and Ti-based tanning agent were characterized for metal content by inductively coupled plasma mass spectrometry (ICP-MS) and chemical analysis; the tanned leather (wet white leather) was characterized by Scanning Electron Microscope/Energy Dispersive Using X-ray (Analysis). SEM/EDX analysis for metal content; Differential scanning calorimetric (DSC), Micro-Hot-Table and standard shrinkage temperature showing a hydrothermal stability (ranged from 75.3 to 77°C) and chemical analysis showing the leather is tanned and can be processed through the subsequent mechanical operations (splitting, shaving). On the other hand, an analysis of major minor trace substances from Ti-end waste (especially vanadium content) in new tanning agent and wet white leather (not detected) and residue stream was performed and showed that leachability of vanadium is acceptable. The results obtained show that new tanning agent obtained from Ti end waste can be used for tanning bovine hides, as eco-friendly alternative for chrome tanning. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Whole genome comparison between table and wine grapes reveals a comprehensive catalog of structural variants

    PubMed Central

    2014-01-01

    Background Grapevine (Vitis vinifera L.) is the most important Mediterranean fruit crop, used to produce both wine and spirits as well as table grape and raisins. Wine and table grape cultivars represent two divergent germplasm pools with different origins and domestication history, as well as differential characteristics for berry size, cluster architecture and berry chemical profile, among others. ‘Sultanina’ plays a pivotal role in modern table grape breeding providing the main source of seedlessness. This cultivar is also one of the most planted for fresh consumption and raisins production. Given its importance, we sequenced it and implemented a novel strategy for the de novo assembly of its highly heterozygous genome. Results Our approach produced a draft genome of 466 Mb, recovering 82% of the genes present in the grapevine reference genome; in addition, we identified 240 novel genes. A large number of structural variants and SNPs were identified. Among them, 45 (21 SNPs and 24 INDELs) were experimentally confirmed in ‘Sultanina’ and six SNPs in other 23 table grape varieties. Transposable elements corresponded to ca. 80% of the repetitive sequences involved in structural variants and more than 2,000 genes were affected in their structure by these variants. Some of these genes are likely involved in embryo development, suggesting that they may contribute to seedlessness, a key trait for table grapes. Conclusions This work produced the first structural variants and SNPs catalog for grapevine, constituting a novel and very powerful tool for genomic studies in this key fruit crop, particularly useful to support marker assisted breeding in table grapes. PMID:24397443

  19. Comparative Research of Navy Voluntary Education at Operational Commands

    DTIC Science & Technology

    2017-03-01

    return on investment, ROI, logistic regression, multivariate analysis, descriptive statistics, Markov, time-series, linear programming 15. NUMBER...21  B.  DESCRIPTIVE STATISTICS TABLES ...............................................25  C.  PRIVACY CONSIDERATIONS...THIS PAGE INTENTIONALLY LEFT BLANK xi LIST OF TABLES Table 1.  Variables and Descriptions . Adapted from NETC (2016). .......................21

  20. Biochemical Thermodynamics under near Physiological Conditions

    ERIC Educational Resources Information Center

    Mendez, Eduardo

    2008-01-01

    The recommendations for nomenclature and tables in Biochemical Thermodynamics approved by IUBMB and IUPAC in 1994 can be easily introduced after the chemical thermodynamic formalism. Substitution of the usual standard thermodynamic properties by the transformed ones in the thermodynamic equations, and the use of appropriate thermodynamic tables…

  1. Mistake of Having Students Be Mendeleev Just for a Day

    ERIC Educational Resources Information Center

    Criswell, Brett

    2007-01-01

    The study describes a new methodology and learning cycle, which will give a better understanding of the periodic table to the students. The students following the cycle have now started focusing more on the chemical instead of physical properties when developing their schemes.

  2. 40 CFR 180.637 - Mandipropamid; tolerances for residues.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances... commodities, resulting from use of the pesticide pursuant to FFIFRA section 18 emergency exemptions. The tolerances expire on the date specified in the table. Commodity Parts per million Expiration date Basil...

  3. 40 CFR 180.601 - Cyazofamid; tolerances for residues.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances...-carbonitrile, calculated as the stoichiometric equivalent of cyazofamid, resulting from use of the pesticide... in the table. Commodity Parts per million Expiration/revocation date Basil, dried 144 12/31/14 Basil...

  4. 40 CFR Table 1 to Subpart Dd of... - List of Hazardous Air Pollutants (HAP) for Subpart DD

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Methanol 0.855 74-83-9 Methyl bromide (Bromomethane) 1.000 74-87-3 Methyl chloride (Choromethane) 1.000 71... more common glycol ethers can be obtained by contacting the Waste and Chemical Processes Group, Office...

  5. 40 CFR Table 1 to Subpart Dd of... - List of Hazardous Air Pollutants (HAP) for Subpart DD

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Methanol 0.855 74-83-9 Methyl bromide (Bromomethane) 1.000 74-87-3 Methyl chloride (Choromethane) 1.000 71... more common glycol ethers can be obtained by contacting the Waste and Chemical Processes Group, Office...

  6. Applications of Solubility Data

    ERIC Educational Resources Information Center

    Tomkins, Reginald P. T.

    2008-01-01

    This article describes several applications of the use of solubility data. It is not meant to be exhaustive but rather to show that knowledge of solubility data is required in a variety of technical applications that assist in the design of chemical processes. (Contains 3 figures and 1 table.)

  7. Sulfide mineralization: Its role in chemical weathering of Mars

    NASA Technical Reports Server (NTRS)

    Burns, Roger G.

    1988-01-01

    Pyrrhotite-pentlandite assemblages in mafic and ultramafic igneous rocks may have contributed significantly to the chemical weathering reactions that produced degradation products in the Martian regolith. By analogy with terrestrial processes, a model is proposed whereby supergene alteration of these primary Fe-Ni sulfides on Mars has generated secondary sulfides (e.g., pyrite) below the water table and produced acidic groundwater containing high concentrations of dissolved Fe, Ni and sulfate ions. The low pH solutions also initiated weathering reactions of igneous feldspars and ferromagnesian silicates to form clay silicate and ferric oxyhydroxide phases. Near-surface oxidation and hydrolysis of ferric sulfato- and hydroxo-complex ions and sols formed gossans above the water table consisting of poorly crystalline hydrated ferric sulfates (e.g., jarosite), oxides (ferrihydrite, goethite) and silica (opal). Underlying groundwater, now permafrost, contains hydroxo sulfato complexes of Fe, Al, Mg, Ni, etc., which may be stabilized in frozen acidic solutions beneath the surface of Mars. Sublimation of permafrost may replenish colloidal ferric oxides, sulfates and phyllosilicates during dust storms on Mars.

  8. Fluorescence-based thermal shift data on multidrug regulator AcrR from Salmonella enterica subsp. entrica serovar Typhimurium str. LT2.

    PubMed

    Manjasetty, Babu A; Halavaty, Andrei S; Luan, Chi-Hao; Osipiuk, Jerzy; Mulligan, Rory; Kwon, Keehwan; Anderson, Wayne F; Joachimiak, Andrzej

    2016-06-01

    The fluorescence-based thermal shift (FTS) data presented here include Table S1 and Fig. S1, and are supplemental to our original research article describing detailed structural, FTS, and fluorescence polarization analyses of the Salmonella enterica subsp. entrica serovar Typhimurium str. LT2 multidrug transcriptional regulator AcrR (StAcrR) (doi:10.1016/j.jsb.2016.01.008) (Manjasetty et al., 2015 [1]). Table S1 contains chemical formulas, a Chemical Abstracts Service (CAS) Registry Number (CAS no.), FTS rank (a ligand with the highest rank) has the largest difference in the melting temperature (ΔT m), and uses as drug molecules against various pathological conditions of sixteen small-molecule ligands that increase thermal stability of StAcrR. Thermal stability of human enolase 1, a negative control protein, was not affected in the presence of various concentrations of the top six StAcrR binders (Fig. S1).

  9. Estimating life expectancies for US small areas: a regression framework

    NASA Astrophysics Data System (ADS)

    Congdon, Peter

    2014-01-01

    Analysis of area mortality variations and estimation of area life tables raise methodological questions relevant to assessing spatial clustering, and socioeconomic inequalities in mortality. Existing small area analyses of US life expectancy variation generally adopt ad hoc amalgamations of counties to alleviate potential instability of mortality rates involved in deriving life tables, and use conventional life table analysis which takes no account of correlated mortality for adjacent areas or ages. The alternative strategy here uses structured random effects methods that recognize correlations between adjacent ages and areas, and allows retention of the original county boundaries. This strategy generalizes to include effects of area category (e.g. poverty status, ethnic mix), allowing estimation of life tables according to area category, and providing additional stabilization of estimated life table functions. This approach is used here to estimate stabilized mortality rates, derive life expectancies in US counties, and assess trends in clustering and in inequality according to county poverty category.

  10. Default "Gunel and Dickey" Bayes factors for contingency tables.

    PubMed

    Jamil, Tahira; Ly, Alexander; Morey, Richard D; Love, Jonathon; Marsman, Maarten; Wagenmakers, Eric-Jan

    2017-04-01

    The analysis of R×C contingency tables usually features a test for independence between row and column counts. Throughout the social sciences, the adequacy of the independence hypothesis is generally evaluated by the outcome of a classical p-value null-hypothesis significance test. Unfortunately, however, the classical p-value comes with a number of well-documented drawbacks. Here we outline an alternative, Bayes factor method to quantify the evidence for and against the hypothesis of independence in R×C contingency tables. First we describe different sampling models for contingency tables and provide the corresponding default Bayes factors as originally developed by Gunel and Dickey (Biometrika, 61(3):545-557 (1974)). We then illustrate the properties and advantages of a Bayes factor analysis of contingency tables through simulations and practical examples. Computer code is available online and has been incorporated in the "BayesFactor" R package and the JASP program ( jasp-stats.org ).

  11. New process for production of fermented black table olives using selected autochthonous microbial resources

    PubMed Central

    Tufariello, Maria; Durante, Miriana; Ramires, Francesca A.; Grieco, Francesco; Tommasi, Luca; Perbellini, Ezio; Falco, Vittorio; Tasioula-Margari, Maria; Logrieco, Antonio F.; Mita, Giovanni; Bleve, Gianluca

    2015-01-01

    Table olives represent one important fermented product in Europe and, in the world, their demand is constantly increasing. At the present time, no systems are available to control black table olives spontaneous fermentation by the Greek method. During this study, a new protocol for the production of black table olives belonging to two Italian (Cellina di Nardò and Leccino) and two Greek (Kalamàta and Conservolea) cultivars has been developed: for each table olive cultivar, starter-driven fermentations were performed inoculating, firstly, one selected autochthonous yeast starter and, subsequently, one selected autochthonous LAB starter. All starters formulation were able to dominate fermentation process. The olive fermentation was monitored using specific chemical descriptors able to identify a first stage (30 days) mainly characterized by aldehydes; a second period (60 days) mainly characterized by higher alcohols, styrene and terpenes; a third fermentation stage represented by acetate esters, esters and acids. A significant decrease of fermentation time (from 8 to 12 months to a maximum of 3 months) and an significant improvement in organoleptic characteristics of the final product were obtained. This study, for the first time, describes the employment of selected autochthonous microbial resources optimized to mimic the microbial evolution already recorded during spontaneous fermentations. PMID:26441932

  12. Corrigendum to "Chemical composition and acidity of size-fractionated inorganic aerosols of 2013-14 winter haze in Shanghai and associated health risk of toxic elements" [Atmos. Environ. (2015) 259-271

    NASA Astrophysics Data System (ADS)

    Behera, Sailesh N.; Cheng, Jinping; Huang, Xian; Zhu, Qiongyu; Liu, Ping; Balasubramanian, Rajasekhar

    2018-03-01

    The authors regret that the sources from which the RfC (reference concentration) and the IUR (inhalation unit risk) values were obtained for estimation of RfD (reference dose, presented in Table 2) and SF (slope factor, presented in Table 3) were not clearly indicated in the published article due to an oversight. The revised tables with improved clarity are given below. a The Risk Assessment Information System (https://rais.ornl.gov/) b USEPA Integrated Risk Information System (IRIS) (http://www.epa.gov/iris) c The California EPA, the office of Environmental Health Hazard Assessment (OEHHA) (https://www.oehha.gov.gov/) d Behera, S.N., Xian, H. and Balasubramanian, R., 2014. Human health risk associated with exposure to toxic elements in mainstream and sidestream cigarette smoke. Science of the Total Environment, 472, pp.947-956.

  13. On the Use of Calibration Explosions at the Former Semipalatinsk Test Site for Compiling a Travel-time Model of the Crust and Upper Mantle

    NASA Astrophysics Data System (ADS)

    Belyashova, N. N.; Shacilov, V. I.; Mikhailova, N. N.; Komarov, I. I.; Sinyova, Z. I.; Belyashov, A. V.; Malakhova, M. N.

    - Two chemical calibration explosions, conducted at the former Semipalatinsk nuclear test site in 1998 with charges of 25 tons and 100 tons TNT, have been used for developing travel-time curves and generalized one-dimensional velocity models of the crust and upper mantle of the platform region of Kazakhstan. The explosions were recorded by a number of digital seismic stations, located in Kazakhstan at distances ranging from 0 to 720km. The travel-time tables developed in this paper cover the phases P, Pn, Pg, S, Sn, Lg in a range of 0-740km and the velocity models apply to the crust down to 44km depth and to the mantle down to 120km. A comparison of the compiled travel-time tables with existing travel-time tables of CSE and IASPEI91 is presented.

  14. Electron microprobe mineral analysis guide

    NASA Technical Reports Server (NTRS)

    Brown, R. W.

    1980-01-01

    Electron microprobe mineral analysis guide is a compilation of X-ray tables and spectra recorded from various mineral matrices. Spectra were obtained using electron microprobe, equipped with LiF geared, curved crystal X-ray spectrometers, utilizing typical analytical operating conditions: 15 Kv acceleration potential, 0.02 microampere sample current as measured on a clinopyroxene standard (CP19). Tables and spectra are presented for the majority of elements, fluorine through uranium, occurring in mineral samples from lunar, meteoritic and terrestrial sources. Tables for each element contain relevant analytical information, i.e., analyzing crystal, X-ray peak, background and relative intensity information, X-ray interferences and a section containing notes on the measurement. Originally intended to cover silicates and oxide minerals the tables and spectra have been expanded to cover other mineral phases. Electron microprobe mineral analysis guide is intended as a spectral base to which additional spectra can be added as the analyst encounters new mineral matrices.

  15. A Memorandum Report: Physical Constants of MCE

    DTIC Science & Technology

    2016-08-01

    published on 16 July 1945 by the Chemical Warfare Service (Edgewood Arsenal, MD) as T.D.M.R. 1094 (Control No. 5004- 1094 ). The report is being...MCE; T.D.M.R. 1094 ; Chemical Warfare Service: Edgewood Arsenal, MD, 1945; SECRET Report (ADB964103). The purpose of this report is to correct two...technical errors recently found in T.D.M.R. 1094 . The first error appears to be a transcription error for the vapor pressure value listed in Table 2

  16. Thermal Stresses 97: Proceedings of the Second International Symposium on Thermal Stresses and Related Topics.

    DTIC Science & Technology

    1997-06-11

    chemical changes in concrete. This has not been modelled here. teflan«l««*(MP3) ’< & i! i...Equations, Wiley, London, 1969. (8) ZienMewicz, O.C., The Finite Element Method in Engeneering Science, McGraw- Hill, New York, 1971. (9) Strang, G...material. The chemical composition and the strength values of both materials are given in Table 1. Sheet metal strips of 300x90x10 mm prepared for

  17. Survey of Alternative Fuels for Corps of Engineers Diesel Engine Powered Dredges.

    DTIC Science & Technology

    1984-04-01

    due to its physical and chemical properties ; as a result, the extent of engine and fuel system modifications must be considered. Engine performance...17,200 17,629 18,884 Cetane Number 54 24 * 16 21 50 • Not available / 00 -30- H-Coal The physical properties shown in Table 4 would strongly...have the desirable physical and chemical properties been defined to make them totally acceptable as a fuel source. The 1973 oil embargo signaled the

  18. Patterns of medicinal plant use: an examination of the Ecuadorian Shuar medicinal flora using contingency table and binomial analyses.

    PubMed

    Bennett, Bradley C; Husby, Chad E

    2008-03-28

    Botanical pharmacopoeias are non-random subsets of floras, with some taxonomic groups over- or under-represented. Moerman [Moerman, D.E., 1979. Symbols and selectivity: a statistical analysis of Native American medical ethnobotany, Journal of Ethnopharmacology 1, 111-119] introduced linear regression/residual analysis to examine these patterns. However, regression, the commonly-employed analysis, suffers from several statistical flaws. We use contingency table and binomial analyses to examine patterns of Shuar medicinal plant use (from Amazonian Ecuador). We first analyzed the Shuar data using Moerman's approach, modified to better meet requirements of linear regression analysis. Second, we assessed the exact randomization contingency table test for goodness of fit. Third, we developed a binomial model to test for non-random selection of plants in individual families. Modified regression models (which accommodated assumptions of linear regression) reduced R(2) to from 0.59 to 0.38, but did not eliminate all problems associated with regression analyses. Contingency table analyses revealed that the entire flora departs from the null model of equal proportions of medicinal plants in all families. In the binomial analysis, only 10 angiosperm families (of 115) differed significantly from the null model. These 10 families are largely responsible for patterns seen at higher taxonomic levels. Contingency table and binomial analyses offer an easy and statistically valid alternative to the regression approach.

  19. Requirements for Minimum Sample Size for Sensitivity and Specificity Analysis

    PubMed Central

    Adnan, Tassha Hilda

    2016-01-01

    Sensitivity and specificity analysis is commonly used for screening and diagnostic tests. The main issue researchers face is to determine the sufficient sample sizes that are related with screening and diagnostic studies. Although the formula for sample size calculation is available but concerning majority of the researchers are not mathematicians or statisticians, hence, sample size calculation might not be easy for them. This review paper provides sample size tables with regards to sensitivity and specificity analysis. These tables were derived from formulation of sensitivity and specificity test using Power Analysis and Sample Size (PASS) software based on desired type I error, power and effect size. The approaches on how to use the tables were also discussed. PMID:27891446

  20. Sexual Harassment Retaliation Climate DEOCS 4.1 Construct Validity Summary

    DTIC Science & Technology

    2017-08-01

    exploratory factor analysis, and bivariate correlations (sample 1) 2) To determine the factor structure of the remaining (final) questions via...statistics, reliability analysis, exploratory factor analysis, and bivariate correlations of the prospective Sexual Harassment Retaliation Climate...reported by the survey requester). For information regarding the composition of sample, refer to Table 1. Table 1. Sample 1 Demographics n

  1. 14 CFR Appendix C to Part 420 - Risk Analysis

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Risk Analysis C Appendix C to Part 420... TRANSPORTATION LICENSING LICENSE TO OPERATE A LAUNCH SITE Pt. 420, App. C Appendix C to Part 420—Risk Analysis (a... table C-1. Table C-1 provides sources where an applicant may obtain data acceptable to the FAA. An...

  2. Le Chatelier's Principle, Temperature Effects, and Entropy.

    ERIC Educational Resources Information Center

    Campbell, J. Arthur

    1985-01-01

    One of the most useful methods of understanding chemical equilibria is provided by Le Chatelier's principle. The relationships between this principle, temperature, and entropy are discussed. Tables with thermodynamic data for some net reactions commonly used to illustrate the principle and for reactions involving gases are included. (JN)

  3. 40 CFR 63.105 - Maintenance wastewater requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry... wastewaters containing those organic HAP's listed in table 9 of subpart G of this part. (b) The owner or... will be followed to properly manage the wastewater and control organic HAP emissions to the atmosphere...

  4. 40 CFR 63.105 - Maintenance wastewater requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical... for maintenance wastewaters containing those organic HAP's listed in table 9 of subpart G of this part... procedures that will be followed to properly manage the wastewater and control organic HAP emissions to the...

  5. 40 CFR 63.105 - Maintenance wastewater requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical... for maintenance wastewaters containing those organic HAP's listed in table 9 of subpart G of this part... procedures that will be followed to properly manage the wastewater and control organic HAP emissions to the...

  6. 40 CFR 180.637 - Mandipropamid; tolerances for residues.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances... on the commodity. Commodity Parts per million Basil, dried leaves 200 Basil, fresh leaves 30 Bean..., in or on the commodities listed in the table below resulting from use of the pesticide pursuant to...

  7. Provocative Opinion: Can Chemistry be Learned Without Understanding?

    ERIC Educational Resources Information Center

    Sanderson, R. T.

    1974-01-01

    Voices the opinion that clearer and more useful explanations of common chemistry are needed to facilitate understanding. Presents examples from the realms of atomic structure, periodic table, history of chemistry, valence, electronegativity, electrode potentials, covalent bonds, polar covalence, bond energy, and causes of chemical change. (GS)

  8. 26 CFR 52.4682-3 - Imported taxable products.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ....4682-3 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) MISCELLANEOUS...; references to Tables; special rule for 1990—(1) Overview. This section provides rules relating to the tax... products, determining the weight of the ozone-depleting chemicals (ODCs) used as materials in the...

  9. Rank and independence in contingency table

    NASA Astrophysics Data System (ADS)

    Tsumoto, Shusaku

    2004-04-01

    A contingency table summarizes the conditional frequencies of two attributes and shows how these two attributes are dependent on each other. Thus, this table is a fundamental tool for pattern discovery with conditional probabilities, such as rule discovery. In this paper, a contingency table is interpreted from the viewpoint of statistical independence and granular computing. The first important observation is that a contingency table compares two attributes with respect to the number of equivalence classes. For example, a n x n table compares two attributes with the same granularity, while a m x n(m >= n) table compares two attributes with different granularities. The second important observation is that matrix algebra is a key point of analysis of this table. Especially, the degree of independence, rank plays a very important role in evaluating the degree of statistical independence. Relations between rank and the degree of dependence are also investigated.

  10. Geochemical study of the Sakalol-Harralol geothermal field (Republic of Djibouti): Evidences of a low enthalpy aquifer between Manda-Inakir and Asal rift settings

    NASA Astrophysics Data System (ADS)

    Awaleh, Mohamed Osman; Boschetti, Tiziano; Soubaneh, Youssouf Djibril; Baudron, Paul; Kawalieh, Ali Dirir; Dabar, Omar Assowe; Ahmed, Moussa Mahdi; Ahmed, Samaleh Idriss; Daoud, Mohamed Ahmed; Egueh, Nima Moussa; Mohamed, Jalludin

    2017-02-01

    Eighty-six sodium bicarbonate to sodium chloride hot springs and four water wells in the Tadjourah Region of Djibouti were investigated for major, minor (B, Br, F, Sr, Li) chemistry and isotope composition of water and dissolved components (87Sr/86Sr, 11B/10B, 13C/12C and 14C of DIC, 34S/32S and 18O/16O of sulfate). The deep saline Na-Cl reservoir at 143 °C shows affinity with the shallow geothermal water from the "active" Asal rift. Asal water is a diluted and recycled seawater component with the major cation composition obliterated by equilibration with Stratoid basalt. Locally, the deep reservoir is differentiated in term of recharge, and re-equilibration with rocks and mixing. In particular, two spring groups reveal contributions from evaporites typical of the "passive" graben setting of the Afar. A model on 34S/32S and 18O/16O demonstrates the isotope imprint of magmatic SO2 disproportionation on dissolved and solid sulfate, whose values probably persists in a sedimentary environment without trace of seawater. On the other hand a seawater signature, modified by mixing and secondary fractionation effects, is partially maintained according to the boron isotope composition (up to + 27.4‰). Temperature estimation in low-enthalpy geothermal reservoirs is notoriously difficult, especially where mixing with fluids of differing genesis and/or conduction cooling take place. From a geothermometric point of view, the multi-method approach followed in this study (up-to-date theoretical and thermodynamic equations, ad-hoc silica geothermometers inferred from local rocks, checking of the results on a 18Oαsulfate-water vs. temperature diagram) provides some insights and perspectives on how to tackle the problem. Table S2. Sampling locations, T, pH, EC, TDS and hydrochemical types of the sampled waters. Table S3. Chemical analyses of thermal and cold waters from Sakalaol-Haralol geothermal field. Table S4. Mineral saturation indices of SHGF hot springs waters calculated at the sampling conditions. Table S5. Geothermometric estimations of the SHGF deep temperature calculated fromthe hot springwater samples. All displayed values are in °C. In the chemical geothermometer equations, aqueous silica (SiO2), Na and K concentration in ppm were used, whereas δ18O(SO4) and δ18O(H2O) values were used in the isotope geothermometer equations. Table S6. 14C age models. Fig. S1. Hierarchical cluster analysis (The pink line is "phenon line"). Fig. S2. Principal Component analysis results. Fig. S3. (1) Diagram showing the change in calculated saturation indices (Log(Q/K)) of carbonate minerals as a function of temperature for C1 thermal waters. (2) Diagram showing the change in calculated saturation indices (Log(Q/K)) of carbonate minerals as a function of temperature for C2 thermal waters. (3) Diagram showing the change in calculated saturation indices (Log(Q/K)) of carbonate minerals as a function of temperature for C3 thermal waters. (4) Diagram showing the change in calculated saturation indices (Log(Q/K)) of carbonate minerals as a function of temperature for C4 thermal waters (sample # 90). Fig. S4. Regional piezometric map adapted from the country piezomztric map (BGR, 1982).

  11. 40 CFR Table 5 to Subpart Jjjjjj... - Fuel Analysis Requirements

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 14 2011-07-01 2011-07-01 false Fuel Analysis Requirements 5 Table 5 to Subpart JJJJJJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for...

  12. 40 CFR Table 5 to Subpart Jjjjjj... - Fuel Analysis Requirements

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 15 2014-07-01 2014-07-01 false Fuel Analysis Requirements 5 Table 5 to Subpart JJJJJJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for...

  13. 40 CFR Table 5 to Subpart Jjjjjj... - Fuel Analysis Requirements

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 15 2013-07-01 2013-07-01 false Fuel Analysis Requirements 5 Table 5 to Subpart JJJJJJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for...

  14. 76 FR 57982 - Building Energy Codes Cost Analysis

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-19

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy [Docket No. EERE-2011-BT-BC-0046] Building Energy Codes Cost Analysis Correction In notice document 2011-23236 beginning on page... heading ``Table 1. Cash flow components'' should read ``Table 7. Cash flow components''. [FR Doc. C1-2011...

  15. Robustness of Type I Error and Power in Set Correlation Analysis of Contingency Tables.

    ERIC Educational Resources Information Center

    Cohen, Jacob; Nee, John C. M.

    1990-01-01

    The analysis of contingency tables via set correlation allows the assessment of subhypotheses involving contrast functions of the categories of the nominal scales. The robustness of such methods with regard to Type I error and statistical power was studied via a Monte Carlo experiment. (TJH)

  16. Stellar nucleosynthesis and chemical evolution of the solar neighborhood

    NASA Technical Reports Server (NTRS)

    Clayton, Donald D.

    1988-01-01

    Current theoretical models of nucleosynthesis (N) in stars are reviewed, with an emphasis on their implications for Galactic chemical evolution. Topics addressed include the Galactic population II red giants and early N; N in the big bang; star formation, stellar evolution, and the ejection of thermonuclearly evolved debris; the chemical evolution of an idealized disk galaxy; analytical solutions for a closed-box model with continuous infall; and nuclear burning processes and yields. Consideration is given to shell N in massive stars, N related to degenerate cores, and the types of observational data used to constrain N models. Extensive diagrams, graphs, and tables of numerical data are provided.

  17. Data on the chemical properties of commercial fish sauce products.

    PubMed

    Nakano, Mitsutoshi; Sagane, Yoshimasa; Koizumi, Ryosuke; Nakazawa, Yozo; Yamazaki, Masao; Watanabe, Toshihiro; Takano, Katsumi; Sato, Hiroaki

    2017-12-01

    This data article reports on the chemical properties of commercial fish sauce products associated with the fish sauce taste and flavor. All products were analyzed in triplicate. Dried solid content was analyzed by moisture analyzer. Fish sauce salinity was determined by a salt meter. pH was measured using a pH meter. The acidity was determined using a titration assay. Amino nitrogen and total nitrogen were evaluated using a titration assay and Combustion-type nitrogen analyzer, respectively. The analyzed products originated from Japan, Thailand, Vietnam, China, the Philippines, and Italy. Data on the chemical properties of the products are provided in table format in the current article.

  18. TableViewer for Herschel Data Processing

    NASA Astrophysics Data System (ADS)

    Zhang, L.; Schulz, B.

    2006-07-01

    The TableViewer utility is a GUI tool written in Java to support interactive data processing and analysis for the Herschel Space Observatory (Pilbratt et al. 2001). The idea was inherited from a prototype written in IDL (Schulz et al. 2005). It allows to graphically view and analyze tabular data organized in columns with equal numbers of rows. It can be run either as a standalone application, where data access is restricted to FITS (FITS 1999) files only, or it can be run from the Quick Look Analysis(QLA) or Interactive Analysis(IA) command line, from where also objects are accessible. The graphic display is very versatile, allowing plots in either linear or log scales. Zooming, panning, and changing data columns is performed rapidly using a group of navigation buttons. Selecting and de-selecting of fields of data points controls the input to simple analysis tasks like building a statistics table, or generating power spectra. The binary data stored in a TableDataset^1, a Product or in FITS files can also be displayed as tabular data, where values in individual cells can be modified. TableViewer provides several processing utilities which, besides calculation of statistics either for all channels or for selected channels, and calculation of power spectra, allows to convert/repair datasets by changing the unit name of data columns, and by modifying data values in columns with a simple calculator tool. Interactively selected data can be separated out, and modified data sets can be saved to FITS files. The tool will be very helpful especially in the early phases of Herschel data analysis when a quick access to contents of data products is important. TableDataset and Product are Java classes defined in herschel.ia.dataset.

  19. Demographic effects of deltamethrin resistance in the Chagas disease vector Triatoma infestans.

    PubMed

    Germano, M D; Picollo, M I

    2016-12-01

    Triatoma infestans (Heteroptera: Reduviidae) Klug is the main vector of Chagas disease in Latin America. Resistance to deltamethrin was reported in Argentina and recently associated with reproductive and longevity trade-offs. The objectives of the present study were to describe the demographic consequences of deltamethrin resistance in T. infestans and to establish possible target stages for chemical control in susceptible and resistant colonies. A stage-classified matrix model was constructed based on the average stage length for susceptible, resistant and reciprocal matings' progeny. The differences between colonies were analysed by prospective and retrospective analysis. The life table parameters indicated reduced fecundity, fertility and population growth in resistant insects. The retrospective analysis suggested the latter was associated with lower reproductive output and increased fifth-instar nymph stage length. The prospective analysis suggested that the adult stage should be the main target for insecticide control. Although, fifth-instar nymphs should also be targeted when resistance has been detected. The presented results show demographic effects of deltamethrin resistance in T. infestans. While the older stages could be the main targets for chemical control, this approach is impeded by their higher tolerance to insecticides. It is concluded that the different mode of action insecticides would be more effective than a dose increase for the control of deltamethrin-resistant T. infestans. © 2016 The Royal Entomological Society.

  20. Foreign Language Translation of Chemical Nomenclature by Computer

    PubMed Central

    2009-01-01

    Chemical compound names remain the primary method for conveying molecular structures between chemists and researchers. In research articles, patents, chemical catalogues, government legislation, and textbooks, the use of IUPAC and traditional compound names is universal, despite efforts to introduce more machine-friendly representations such as identifiers and line notations. Fortunately, advances in computing power now allow chemical names to be parsed and generated (read and written) with almost the same ease as conventional connection tables. A significant complication, however, is that although the vast majority of chemistry uses English nomenclature, a significant fraction is in other languages. This complicates the task of filing and analyzing chemical patents, purchasing from compound vendors, and text mining research articles or Web pages. We describe some issues with manipulating chemical names in various languages, including British, American, German, Japanese, Chinese, Spanish, Swedish, Polish, and Hungarian, and describe the current state-of-the-art in software tools to simplify the process. PMID:19239237

Top