An Analysis of Cumulative Risks Indicated by Biomonitoring Data of Six Phthalates Using the Maximum Cumulative Ratio

EPA Science Inventory

The Maximum Cumulative Ratio (MCR) quantifies the degree to which a single component of a chemical mixture drives the cumulative risk of a receptor.1 This study used the MCR, the Hazard Index (HI) and Hazard Quotient (HQ) to evaluate co-exposures to six phthalates using biomonito...

Quality of Chemical Safety Information in Printing Industry.

PubMed

Tsai, Chung-Jung; Mao, I-Fang; Ting, Jo-Yu; Young, Chi-Hsien; Lin, Jhih-Sian; Li, Wei-Lun

2016-04-01

Employees in printing industries can be exposed to multiple solvents in their work environment. The objectives of this study were to investigate the critical components of chemical solvents by analyzing the components of the solvents and collecting the Safety data sheets (SDSs), and to evaluate the hazard communication implementation status in printing industries. About 152 printing-related industries were recruited by area-stratified random sampling and included 23 plate-making, 102 printing and 27 printing-assistance companies in Taiwan. We analyzed company questionnaires (n = 152), SDSs (n = 180), and solvents (n = 20) collected from this sample of printing-related companies. Analytical results indicated that benzene and ethylbenzene, which were carcinogen and possibly carcinogen, were detectable in the cleaning solvents, and the detection rate were 54.5% (concentrations: <0.011-0.035 wt%) and 63.6% (concentrations: <0.011-6.22 wt%), respectively; however, neither compound was disclosed in the SDS for the solvents. Several other undisclosed components, including methanol, isopropanol and n-butanol, were also identified in the printing inks, fountain solutions and dilution solvents. We noted that, of the companies we surveyed, only 57.2% had a hazard communication program, 61.8% had SDSs on file and 59.9% provided employee safety and health training. We note that hazard communication programs were missing or ineffective in almost half of the 152 printing industries surveyed. Current safety information of solvents components in printing industries was inadequate, and many hazardous compounds were undisclosed in the SDSs of the solvents or the labels of the containers. The implementation of hazard communications in printing industries was still not enough for protecting the employees' safety and health. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Quality of Chemical Safety Information in Printing Industry

PubMed Central

Tsai, Chung-Jung; Mao, I-Fang; Ting, Jo-Yu; Young, Chi-Hsien; Lin, Jhih-Sian; Li, Wei-Lun

2016-01-01

Objectives: Employees in printing industries can be exposed to multiple solvents in their work environment. The objectives of this study were to investigate the critical components of chemical solvents by analyzing the components of the solvents and collecting the Safety data sheets (SDSs), and to evaluate the hazard communication implementation status in printing industries. Method: About 152 printing-related industries were recruited by area-stratified random sampling and included 23 plate-making, 102 printing and 27 printing-assistance companies in Taiwan. We analyzed company questionnaires (n = 152), SDSs (n = 180), and solvents (n = 20) collected from this sample of printing-related companies. Results: Analytical results indicated that benzene and ethylbenzene, which were carcinogen and possibly carcinogen, were detectable in the cleaning solvents, and the detection rate were 54.5% (concentrations: <0.011–0.035 wt%) and 63.6% (concentrations: <0.011–6.22 wt%), respectively; however, neither compound was disclosed in the SDS for the solvents. Several other undisclosed components, including methanol, isopropanol and n-butanol, were also identified in the printing inks, fountain solutions and dilution solvents. We noted that, of the companies we surveyed, only 57.2% had a hazard communication program, 61.8% had SDSs on file and 59.9% provided employee safety and health training. We note that hazard communication programs were missing or ineffective in almost half of the 152 printing industries surveyed. Conclusions: Current safety information of solvents components in printing industries was inadequate, and many hazardous compounds were undisclosed in the SDSs of the solvents or the labels of the containers. The implementation of hazard communications in printing industries was still not enough for protecting the employees’ safety and health. PMID:26568584

Computational toxicology as implemented by the U.S. EPA: providing high throughput decision support tools for screening and assessing chemical exposure, hazard and risk.

PubMed

Kavlock, Robert; Dix, David

2010-02-01

Computational toxicology is the application of mathematical and computer models to help assess chemical hazards and risks to human health and the environment. Supported by advances in informatics, high-throughput screening (HTS) technologies, and systems biology, the U.S. Environmental Protection Agency EPA is developing robust and flexible computational tools that can be applied to the thousands of chemicals in commerce, and contaminant mixtures found in air, water, and hazardous-waste sites. The Office of Research and Development (ORD) Computational Toxicology Research Program (CTRP) is composed of three main elements. The largest component is the National Center for Computational Toxicology (NCCT), which was established in 2005 to coordinate research on chemical screening and prioritization, informatics, and systems modeling. The second element consists of related activities in the National Health and Environmental Effects Research Laboratory (NHEERL) and the National Exposure Research Laboratory (NERL). The third and final component consists of academic centers working on various aspects of computational toxicology and funded by the U.S. EPA Science to Achieve Results (STAR) program. Together these elements form the key components in the implementation of both the initial strategy, A Framework for a Computational Toxicology Research Program (U.S. EPA, 2003), and the newly released The U.S. Environmental Protection Agency's Strategic Plan for Evaluating the Toxicity of Chemicals (U.S. EPA, 2009a). Key intramural projects of the CTRP include digitizing legacy toxicity testing information toxicity reference database (ToxRefDB), predicting toxicity (ToxCast) and exposure (ExpoCast), and creating virtual liver (v-Liver) and virtual embryo (v-Embryo) systems models. U.S. EPA-funded STAR centers are also providing bioinformatics, computational toxicology data and models, and developmental toxicity data and models. The models and underlying data are being made publicly available through the Aggregated Computational Toxicology Resource (ACToR), the Distributed Structure-Searchable Toxicity (DSSTox) Database Network, and other U.S. EPA websites. While initially focused on improving the hazard identification process, the CTRP is placing increasing emphasis on using high-throughput bioactivity profiling data in systems modeling to support quantitative risk assessments, and in developing complementary higher throughput exposure models. This integrated approach will enable analysis of life-stage susceptibility, and understanding of the exposures, pathways, and key events by which chemicals exert their toxicity in developing systems (e.g., endocrine-related pathways). The CTRP will be a critical component in next-generation risk assessments utilizing quantitative high-throughput data and providing a much higher capacity for assessing chemical toxicity than is currently available.

The application of computer modeling to health effect research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, R.S.H.

1996-12-31

In the United States, estimates show that more than 30,000 hazardous waste disposal sites exist, not including military installations, U.S. Department of Energy nuclear facilities, and hundreds and thousands of underground fuel storage tanks; these sites undoubtedly have their own respective hazardous waste chemical problems. When so many sites contain hazardous chemicals, how does one study the health effects of the chemicals at these sites? There could be many different answers, but none would be perfect. For an area as complex and difficult as the study of chemical mixtures associated with hazardous waste disposal sites, there are no perfect approachesmore » and protocols. Human exposure to chemicals, be it environmental or occupational, is rarely, if ever, limited to a single chemical. Therefore, it is essential that we consider multiple chemical effects and interactions in our risk assessment process. Systematic toxicity testing of chemical mixtures in the environment or workplace that uses conventional toxicology methodologies is highly impractical because of the immense numbers of mixtures involved. For example, about 600,000 chemicals are being used in our society. Just considering binary chemical mixtures, this means that there could be 600,000 x 599,999/2 = 359,999,400,000 pairs of chemicals. Assuming that only one in a million of these pairs of chemicals acts synergistically or has other toxicologic interactions, there would still be 359,999 binary chemical mixtures possessing toxicologic interactions. Moreover, toxicologic interactions undoubtedly exist among chemical mixtures with three or more component chemicals; the number of possible combinations for these latter mixtures is almost infinite. These are astronomically large numbers with respect to systematic toxicity testing. 22 refs., 5 figs., 1 tab.« less

Chemical agents for conversion of chrysotile asbestos into non-hazardous materials

DOEpatents

Sugama, Toshifumi; Petrakis, Leon

1998-06-09

A composition and methods for converting a chrysotile asbestos-containing material to a non-regulated environmentally benign solid which comprises a fluoro acid decomposing agent capable of dissociating the chrysotile asbestos to non-regulated components, wherein non-regulated components are non-reactive with the environment, and a binding agent which binds the non-regulated components to form an environmentally benign solid.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This volume contains appendices for the following: Rocky Flats Plant and Idaho National Engineering Laboratory waste process information; TRUPACT-II content codes (TRUCON); TRUPACT-II chemical list; chemical compatibility analysis for Rocky Flats Plant waste forms; chemical compatibility analysis for waste forms across all sites; TRU mixed waste characterization database; hazardous constituents of Rocky Flats Transuranic waste; summary of waste components in TRU waste sampling program at INEL; TRU waste sampling program; and waste analysis data.

Breathable ‘Second Skin’ for Smart Uniforms

ScienceCinema

Fornasiero, Francesco

2018-01-16

Aiming to protect soldiers from biological and chemical threats, a team of Lawrence Livermore National Laboratory scientists have created a material that is highly breathable yet protective from biological agents. This material is the first key component of futuristic smart uniforms that also will respond to and protect from environmental chemical hazards.

Chemical agents for conversion of chrysotile asbestos into non-hazardous materials

DOEpatents

Sugama, Toshifumi; Petrakis, L.

1998-06-09

A composition and methods are disclosed for converting a chrysotile asbestos-containing material to a non-regulated environmentally benign solid which comprises a fluoro acid decomposing agent capable of dissociating the chrysotile asbestos to non-regulated components, wherein non-regulated components are non-reactive with the environment, and a binding agent which binds the non-regulated components to form an environmentally benign solid. 2 figs.

Computational Toxicology as Implemented by the US EPA ...

EPA Pesticide Factsheets

Computational toxicology is the application of mathematical and computer models to help assess chemical hazards and risks to human health and the environment. Supported by advances in informatics, high-throughput screening (HTS) technologies, and systems biology, the U.S. Environmental Protection Agency EPA is developing robust and flexible computational tools that can be applied to the thousands of chemicals in commerce, and contaminant mixtures found in air, water, and hazardous-waste sites. The Office of Research and Development (ORD) Computational Toxicology Research Program (CTRP) is composed of three main elements. The largest component is the National Center for Computational Toxicology (NCCT), which was established in 2005 to coordinate research on chemical screening and prioritization, informatics, and systems modeling. The second element consists of related activities in the National Health and Environmental Effects Research Laboratory (NHEERL) and the National Exposure Research Laboratory (NERL). The third and final component consists of academic centers working on various aspects of computational toxicology and funded by the U.S. EPA Science to Achieve Results (STAR) program. Together these elements form the key components in the implementation of both the initial strategy, A Framework for a Computational Toxicology Research Program (U.S. EPA, 2003), and the newly released The U.S. Environmental Protection Agency's Strategic Plan for Evaluating the T

"The Chemicals Project": Connecting General Chemistry to Students' Lives

NASA Astrophysics Data System (ADS)

Stout, Roland

2000-10-01

"The Chemicals Project" described here strives to bring freshman chemistry alive for students by emphasizing its connection to the real world and to their own lives and experiences. Its major assignments deal with chemical phobias, recognizing the chemicals found in everyday life and chemical hazards (using Material Data Safety Sheets). The project is described in a cooperative learning format, employs portfolio grading, and includes a significant writing component. Ways of linking this project with the course lecture and student evaluations of the project are described. The bottom line: pre- and post-testing shows that it works. The Chemicals Project brings chemistry alive for students.

Respiratory dose analysis for components of ambient particulate matter#

EPA Science Inventory

Particulate matter (PM) in the atmosphere is a complex mixture of particles with different sizes and chemical compositions. Although PM is known to cause health hazard, specific attributes of PM that may cause health effects are somewhat ambiguous. The dose of each specific compo...

Physical properties of select explosive components for assessing their fate and transport in the environment

USDA-ARS?s Scientific Manuscript database

Information on physical properties of munitions compounds is necessary for assessing their environmental distribution and transport, and predict potential hazards. This information is also needed for selection and design of successful physical, chemical or biological environmental remediation proces...

Strategy of Construction and Demolition Waste Management after Chemical Industry Facilities Removal

NASA Astrophysics Data System (ADS)

Tashkinova, I. N.; Batrakova, G. M.; Vaisman, Ya I.

2017-06-01

Mixed waste products are generated in the process of irrelevant industrial projects’ removal if conventional techniques of their demolition and dismantling are applied. In Russia the number of unused chemical industry facilities including structures with high rate of wear is growing. In removing industrial buildings and production shops it is used conventional techniques of demolition and dismantling in the process of which mixed waste products are generated. The presence of hazardous chemicals in these wastes makes difficulties for their use and leads to the increasing volume of unutilized residues. In the process of chemical industry facilities’ removal this fact takes on special significance as a high level of hazardous chemicals in the waste composition demands for the realization of unprofitable measures aimed at ensuring environmental and industrial safety. The proposed strategy of managing waste originated from the demolition and dismantling of chemical industry facilities is based on the methodology of industrial metabolism which allows identifying separate material flows of recycled, harmful and ballast components, performing separate collection of components during removal and taking necessary preventive measures. This strategy has been tested on the aniline synthesis plant being in the process of removal. As a result, a flow of 10 wt. %, subjected to decontamination, was isolated from the total volume of construction and demolition waste (C&D waste). The considered approach allowed using the resource potential of more than 80wt. % of waste and minimizing the disposed waste volume.

Active Metamaterial Based Terahertz Polarimeter for Spectroscopic Detection of Chemical and Biological Hazards

DTIC Science & Technology

2014-04-01

13. SUPPLEMENTARY NOTES Author’s email: grace.d.metcalfe.civ@mail.mil 14. ABSTRACT Polarimetry is the analysis of the polarization state of...been virtually no polarimetry work at terahertz (THz) frequencies because, until recently, it has been difficult to create components to control the...develop the essential components such that THz polarimetry may enhance the ability to study previously unexploited spectral responses in the THz

The future of hazardous chemical safety in China: Opportunities, problems, challenges and tasks.

PubMed

Wang, Bing; Wu, Chao; Reniers, Genserik; Huang, Lang; Kang, Liangguo; Zhang, Laobing

2018-06-20

China is a major country producing and using hazardous chemicals. Unfortunately, the hazardous chemical industry is still one of the most high-risk industries in China. In recent years, especially after two devastating hazardous chemical accidents, namely "Qingdao 11.2 Crude Oil Leaking and Explosion Accident" and "Tianjin Port 8.12 Fire and Explosion Accident" which occurred in 2013 and 2015 respectively, China has attached great importance to hazardous chemical safety. The period between 2016 and 2017 is a crucial period for the future direction of hazardous chemical safety in China because China released a series of important government documents (such as 'Thirteenth Five-Year (2016-2020) Plan for Hazardous Chemical Safety' and 'Comprehensive Plan for Hazardous Chemical Safety Management (December 2016-November 2019)') to promote hazardous chemical safety in the future. What is the future development of China's hazardous chemical safety? To answer this question, this paper attempts to briefly analyze and introduce the opportunities, problems, challenges and tasks of the future of safety with hazardous chemical industrial activities in China, according to the current situation of hazardous chemical safety in China and using the latest government documents and studies. Obviously, this study can provide useful evidence and suggestions for the future of safety management in the hazardous chemical industry both within China and in other countries. Copyright © 2018 Elsevier B.V. All rights reserved.

Environmental stress-corrosion cracking of fiberglass: lessons learned from failures in the chemical industry.

PubMed

Myers, T J; Kytömaa, H K; Smith, T R

2007-04-11

Fiberglass reinforced plastic (FRP) composite materials are often used to construct tanks, piping, scrubbers, beams, grating, and other components for use in corrosive environments. While FRP typically offers superior and cost effective corrosion resistance relative to other construction materials, the glass fibers traditionally used to provide the structural strength of the FRP can be susceptible to attack by the corrosive environment. The structural integrity of traditional FRP components in corrosive environments is usually dependent on the integrity of a corrosion-resistant barrier, such as a resin-rich layer containing corrosion resistant glass fibers. Without adequate protection, FRP components can fail under loads well below their design by an environmental stress-corrosion cracking (ESCC) mechanism when simultaneously exposed to mechanical stress and a corrosive chemical environment. Failure of these components can result in significant releases of hazardous substances into plants and the environment. In this paper, we present two case studies where fiberglass components failed due to ESCC at small chemical manufacturing facilities. As is often typical, the small chemical manufacturing facilities relied largely on FRP component suppliers to determine materials appropriate for the specific process environment and to repair damaged in-service components. We discuss the lessons learned from these incidents and precautions companies should take when interfacing with suppliers and other parties during the specification, design, construction, and repair of FRP components in order to prevent similar failures and chemical releases from occurring in the future.

43 CFR 11.73 - Quantification phase-resource recoverability analysis.

Code of Federal Regulations, 2011 CFR

2011-10-01

... or sediment properties and adsorption-desorption rates between soil or sediment components and water...) Chemical, physical, and biological removal rates of the oil or hazardous substance from the media involved..., sediments, water, or geologic materials; (B) Transport rates in air, soil, water, and sediments; (C...

Variability of hazardous air pollutants in an urban area

NASA Astrophysics Data System (ADS)

Spicer, Chester W.; Buxton, Bruce E.; Holdren, Michael W.; Smith, Deborah L.; Kelly, Thomas J.; Rust, Steven W.; Pate, Alan D.; Sverdrup, George M.; Chuang, Jane C.

The variability of hazardous air pollutants (HAPs) is an important factor in determining human exposure to such chemicals, and in designing HAP measurement programs. This study has investigated the factors which contribute to HAP variability in an urban area. Six measurement sites separated by up to 12 km collected data with 3 h time resolution to examine spatial variability within neighborhoods and between neighborhoods. The measurements were made in Columbus, OH. The 3 h results also were used to study temporal variability, and duplicate samples collected at each site were used to determine the component of variability attributable to the measurement process. Hourly samples collected over 10 days at one site provided further insight into the temporal resolution needed to capture short-term peak concentrations. Measurements at the 6 spatial sites focused on 78 chemicals. Twenty-three of these species were found in at least 95% of the 3 h samples, and 39 chemicals were present at least 60% of the time. The relative standard deviations for most of these 39 frequently detected chemicals was 1.0 or lower. Variability was segmented into temporal, spatial, and measurement components. Temporal variation was the major contributor to HAP variability for 19 of the 39 frequently detected compounds, based on the 3 h data. Measurement imprecision contributed less than 25% for most of the volatile organic species, but 30% or more of the variability for carbonyl compounds, trace elements, and particle-bound extractable organic mass. Interestingly, the spatial component contributed less than 20% of the total variability for all the chemicals except sulfur. Based on the data with hourly resolution, peak to median ratios (hourly peak to 24 h median) averaged between 2 and 4 for most of the volatile organic compounds, but there were two species with peak to median ratios of about 10.

30 CFR 47.21 - Identifying hazardous chemicals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Identifying hazardous chemicals. 47.21 Section... TRAINING HAZARD COMMUNICATION (HazCom) Hazard Determination § 47.21 Identifying hazardous chemicals. The operator must evaluate each chemical brought on mine property and each chemical produced on mine property...

30 CFR 47.21 - Identifying hazardous chemicals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Identifying hazardous chemicals. 47.21 Section... TRAINING HAZARD COMMUNICATION (HazCom) Hazard Determination § 47.21 Identifying hazardous chemicals. The operator must evaluate each chemical brought on mine property and each chemical produced on mine property...

30 CFR 47.21 - Identifying hazardous chemicals.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Identifying hazardous chemicals. 47.21 Section... TRAINING HAZARD COMMUNICATION (HazCom) Hazard Determination § 47.21 Identifying hazardous chemicals. The operator must evaluate each chemical brought on mine property and each chemical produced on mine property...

30 CFR 47.21 - Identifying hazardous chemicals.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Identifying hazardous chemicals. 47.21 Section... TRAINING HAZARD COMMUNICATION (HazCom) Hazard Determination § 47.21 Identifying hazardous chemicals. The operator must evaluate each chemical brought on mine property and each chemical produced on mine property...

30 CFR 47.21 - Identifying hazardous chemicals.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Identifying hazardous chemicals. 47.21 Section... TRAINING HAZARD COMMUNICATION (HazCom) Hazard Determination § 47.21 Identifying hazardous chemicals. The operator must evaluate each chemical brought on mine property and each chemical produced on mine property...

Bio-oils from biomass slow pyrolysis: a chemical and toxicological screening.

PubMed

Cordella, Mauro; Torri, Cristian; Adamiano, Alessio; Fabbri, Daniele; Barontini, Federica; Cozzani, Valerio

2012-09-15

Bio-oils were produced from bench-scale slow-pyrolysis of three different biomass samples (corn stalks, poplar and switchgrass). Experimental protocols were developed and applied in order to screen their chemical composition. Several hazardous compounds were detected in the bio-oil samples analysed, including phenols, furans and polycyclic aromatic hydrocarbons. A procedure was outlined and applied to the assessment of toxicological and carcinogenic hazards of the bio-oils. The following hazardous properties were considered: acute toxicity; ecotoxicity; chronic toxicity; carcinogenicity. Parameters related to these properties were quantified for each component identified in the bio-oils and overall values were estimated for the bio-oils. The hazard screening carried out for the three bio-oils considered suggested that: (i) hazards to human health could be associated with chronic exposures to the bio-oils; (ii) acute toxic effects on humans and eco-toxic effects on aquatic ecosystems could also be possible in the case of loss of containment; and (iii) bio-oils may present a marginal potential carcinogenicity. The approach outlined allows the collection of screening information on the potential hazards posed by the bio-oils. This can be particularly useful when limited time and analytical resources reduce the possibility to obtain detailed specific experimental data. Copyright © 2012 Elsevier B.V. All rights reserved.

A modeling approach to account for toxicokinetic interactions in the calculation of biological hazard index for chemical mixtures.

PubMed

Haddad, S; Tardif, R; Viau, C; Krishnan, K

1999-09-05

Biological hazard index (BHI) is defined as biological level tolerable for exposure to mixture, and is calculated by an equation similar to the conventional hazard index. The BHI calculation, at the present time, is advocated for use in situations where toxicokinetic interactions do not occur among mixture constituents. The objective of this study was to develop an approach for calculating interactions-based BHI for chemical mixtures. The approach consisted of simulating the concentration of exposure indicator in the biological matrix of choice (e.g. venous blood) for each component of the mixture to which workers are exposed and then comparing these to the established BEI values, for calculating the BHI. The simulation of biomarker concentrations was performed using a physiologically-based toxicokinetic (PBTK) model which accounted for the mechanism of interactions among all mixture components (e.g. competitive inhibition). The usefulness of the present approach is illustrated by calculating BHI for varying ambient concentrations of a mixture of three chemicals (toluene (5-40 ppm), m-xylene (10-50 ppm), and ethylbenzene (10-50 ppm)). The results show that the interactions-based BHI can be greater or smaller than that calculated on the basis of additivity principle, particularly at high exposure concentrations. At lower exposure concentrations (e.g. 20 ppm each of toluene, m-xylene and ethylbenzene), the BHI values obtained using the conventional methodology are similar to the interactions-based methodology, confirming that the consequences of competitive inhibition are negligible at lower concentrations. The advantage of the PBTK model-based methodology developed in this study relates to the fact that, the concentrations of individual chemicals in mixtures that will not result in a significant increase in the BHI (i.e. > 1) can be determined by iterative simulation.

Storytelling: An Important Component of Successful Training.

ERIC Educational Resources Information Center

Siegel, Mark

1996-01-01

The director of production at Interactive Media Communications discusses its multimedia training models that address health and safety issues. Their purpose is to create entertaining instructional designs to guide the student in an interactive approach. The article describes two CD-ROM products (on hazardous chemicals and safe driving),…

CLEANER SYNTHESIS OF ORGANIC COMPOUNDS USING SEMICONDUCTER PHOTOCATALYSIS

EPA Science Inventory

The chemical industry is a significant component of the domestic economy, generating well over $250 billion in sales and a trade surplus exceeding $15 billion in each of the last 5 years. The industry is also a major source of industrial waste and is the dominant source of hazard...

76 FR 25376 - Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

... describes: Standard operating procedures for using hazardous chemicals; hazard-control techniques; equipment...] Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of Management... collection requirements specified in the Standard on Occupational Exposure to Hazardous Chemicals in...

40 CFR 156.78 - Precautionary statements for physical or chemical hazards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... or chemical hazards. 156.78 Section 156.78 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Precautionary Statements § 156.78 Precautionary statements for physical or chemical hazards. (a) Requirement.../chemical hazards (e.g., oxidizing potential, conductivity, chemical reactions leading to production of...

40 CFR 156.78 - Precautionary statements for physical or chemical hazards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... or chemical hazards. 156.78 Section 156.78 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Precautionary Statements § 156.78 Precautionary statements for physical or chemical hazards. (a) Requirement.../chemical hazards (e.g., oxidizing potential, conductivity, chemical reactions leading to production of...

40 CFR 156.78 - Precautionary statements for physical or chemical hazards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... or chemical hazards. 156.78 Section 156.78 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Precautionary Statements § 156.78 Precautionary statements for physical or chemical hazards. (a) Requirement.../chemical hazards (e.g., oxidizing potential, conductivity, chemical reactions leading to production of...

40 CFR 156.78 - Precautionary statements for physical or chemical hazards.

Code of Federal Regulations, 2011 CFR

2011-07-01

.../chemical hazards (e.g., oxidizing potential, conductivity, chemical reactions leading to production of... or chemical hazards. 156.78 Section 156.78 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Precautionary Statements § 156.78 Precautionary statements for physical or chemical hazards. (a) Requirement...

Potential primary and secondary hazards of avicides

USGS Publications Warehouse

Schafer, E.W.; Clark, Dell O.

1984-01-01

There are six chemicals or groups of chemicals that are currently registered as avicides that can be used in some or all of the U.S. Most of these chemicals, because of their diverse chemical composition and innate toxicological effects, present somewhat different primary and secondary hazards to avian and mammalian predators and scavengers. Of the chemicals reviewed, all appear to present some degree of primary hazard to non-target birds and mammals; however, PA-14, the Starlicide family of chemicals and fenthion appear to be the least hazardous when used according to use directions. 4-Aminopyridine, endrin and strychnine, because of their high acute toxicity and lack of selectivity, must be considered potentially more hazardous. With respect to secondary hazards, the ranking of chemicals changes considerably and only PA-14 appears to present a negligible hazard. The Starlicide family of chemicals presents negligible hazards to most animal species under currently registered uses, but may be potentially hazardous to cats and owls under specific use conditions. Two chemicals, 4-aminopyridine and strychnine, are potentially more hazardous to predatory and scavenger animals due to their highly toxic nature and rapid lethal effects in target species, leaving unassimilated chemical in the gastrointestinal tract. The remaining chemicals, endrin and fenthion, have been shown to possess the potential for more significant secondary poisoning; however, because of restrictive uses, most of the potential hazards have been avoided in operational use.

Evaluation of turmeric powder adulterated with metanil yellow using FT-Raman and FT-IR spectroscopy

USDA-ARS?s Scientific Manuscript database

Turmeric powder (Curcuma longa L.) is valued both for its medicinal properties and for its popular culinary use such as being a component in curry powder. Due to its high demand in international trade, turmeric powder has been subject to economically driven, hazardous chemical adulteration. This stu...

Computational Toxicology at the US EPA | Science Inventory ...

EPA Pesticide Factsheets

Computational toxicology is the application of mathematical and computer models to help assess chemical hazards and risks to human health and the environment. Supported by advances in informatics, high-throughput screening (HTS) technologies, and systems biology, EPA is developing robust and flexible computational tools that can be applied to the thousands of chemicals in commerce, and contaminant mixtures found in America’s air, water, and hazardous-waste sites. The ORD Computational Toxicology Research Program (CTRP) is composed of three main elements. The largest component is the National Center for Computational Toxicology (NCCT), which was established in 2005 to coordinate research on chemical screening and prioritization, informatics, and systems modeling. The second element consists of related activities in the National Health and Environmental Effects Research Laboratory (NHEERL) and the National Exposure Research Laboratory (NERL). The third and final component consists of academic centers working on various aspects of computational toxicology and funded by the EPA Science to Achieve Results (STAR) program. Key intramural projects of the CTRP include digitizing legacy toxicity testing information toxicity reference database (ToxRefDB), predicting toxicity (ToxCast™) and exposure (ExpoCast™), and creating virtual liver (v-Liver™) and virtual embryo (v-Embryo™) systems models. The models and underlying data are being made publicly available t

Evaluation of the COSHH Essentials Model with a Mixture of Organic Chemicals at a Medium-Sized Paint Producer

PubMed Central

Lee, Eun Gyung; Slaven, James; Bowen, Russell B.; Harper, Martin

2011-01-01

The Control of Substances Hazardous to Health (COSHH) Essentials model was evaluated using full-shift exposure measurements of five chemical components in a mixture [acetone, ethylbenzene, methyl ethyl ketone, toluene, and xylenes] at a medium-sized plant producing paint materials. Two tasks, batch-making and bucket-washing, were examined. Varying levels of control were already established in both tasks and the average exposures of individual chemicals were considerably lower than the regulatory and advisory 8-h standards. The average exposure fractions using the additive mixture formula were also less than unity (batch-making: 0.25, bucket-washing: 0.56) indicating the mixture of chemicals did not exceed the combined occupational exposure limit (OEL). The paper version of the COSHH Essentials model was used to calculate a predicted exposure range (PER) for each chemical according to different levels of control. The estimated PERs of the tested chemicals for both tasks did not show consistent agreement with exposure measurements when the comparison was made for each control method and this is believed to be because of the considerably different volatilities of the chemicals. Given the combination of health hazard and exposure potential components, the COSHH Essentials model recommended a control approach ‘special advice’ for both tasks, based on the potential reproductive hazard ascribed to toluene. This would not have been the same conclusion if some other chemical had been substituted (for example styrene, which has the same threshold limit value as toluene). Nevertheless, it was special advice, which had led to the combination of hygienic procedures in place at this plant. The probability of the combined exposure fractions exceeding unity was 0.0002 for the batch-making task indicating that the employees performing this task were most likely well protected below the OELs. Although the employees involved in the bucket-washing task had greater potential to exceed the threshold limit value of the mixture (P > 1 = 0.2375), the expected personal exposure after adjusting for the assigned protection factor for the respirators in use would be considerably lower (P > 1 = 0.0161). Thus, our findings suggested that the COSHH essentials model worked reasonably well for the volatile organic chemicals at the plant. However, it was difficult to override the reproductive hazard even though it was meant to be possible in principle. Further, it became apparent that an input of existing controls, which is not possible in the web-based model, may have allowed the model be more widely applicable. The experience of using the web-based COSHH Essentials model generated some suggestions to provide a more user-friendly tool to the model users who do not have expertise in occupational hygiene. PMID:21047985

Evaluation of the COSHH Essentials model with a mixture of organic chemicals at a medium-sized paint producer.

PubMed

Lee, Eun Gyung; Slaven, James; Bowen, Russell B; Harper, Martin

2011-01-01

The Control of Substances Hazardous to Health (COSHH) Essentials model was evaluated using full-shift exposure measurements of five chemical components in a mixture [acetone, ethylbenzene, methyl ethyl ketone, toluene, and xylenes] at a medium-sized plant producing paint materials. Two tasks, batch-making and bucket-washing, were examined. Varying levels of control were already established in both tasks and the average exposures of individual chemicals were considerably lower than the regulatory and advisory 8-h standards. The average exposure fractions using the additive mixture formula were also less than unity (batch-making: 0.25, bucket-washing: 0.56) indicating the mixture of chemicals did not exceed the combined occupational exposure limit (OEL). The paper version of the COSHH Essentials model was used to calculate a predicted exposure range (PER) for each chemical according to different levels of control. The estimated PERs of the tested chemicals for both tasks did not show consistent agreement with exposure measurements when the comparison was made for each control method and this is believed to be because of the considerably different volatilities of the chemicals. Given the combination of health hazard and exposure potential components, the COSHH Essentials model recommended a control approach 'special advice' for both tasks, based on the potential reproductive hazard ascribed to toluene. This would not have been the same conclusion if some other chemical had been substituted (for example styrene, which has the same threshold limit value as toluene). Nevertheless, it was special advice, which had led to the combination of hygienic procedures in place at this plant. The probability of the combined exposure fractions exceeding unity was 0.0002 for the batch-making task indicating that the employees performing this task were most likely well protected below the OELs. Although the employees involved in the bucket-washing task had greater potential to exceed the threshold limit value of the mixture (P > 1 = 0.2375), the expected personal exposure after adjusting for the assigned protection factor for the respirators in use would be considerably lower (P > 1 = 0.0161). Thus, our findings suggested that the COSHH essentials model worked reasonably well for the volatile organic chemicals at the plant. However, it was difficult to override the reproductive hazard even though it was meant to be possible in principle. Further, it became apparent that an input of existing controls, which is not possible in the web-based model, may have allowed the model be more widely applicable. The experience of using the web-based COSHH Essentials model generated some suggestions to provide a more user-friendly tool to the model users who do not have expertise in occupational hygiene.

Integrating Hazardous Materials Characterization and Assessment Tools to Guide Pollution Prevention in Electronic Products and Manufacturing

NASA Astrophysics Data System (ADS)

Lam, Carl

Due to technology proliferation, the environmental burden attributed to the production, use, and disposal of hazardous materials in electronics have become a worldwide concern. The major theme of this dissertation is to develop and apply hazardous materials assessment tools to systematically guide pollution prevention opportunities in the context of electronic product design, manufacturing and end-of-life waste management. To this extent, a comprehensive review is first provided on describing hazard traits and current assessment methods to evaluate hazardous materials. As a case study at the manufacturing level, life cycle impact assessment (LCIA)-based and risk-based screening methods are used to quantify chemical and geographic environmental impacts in the U.S. printed wiring board (PWB) industry. Results from this industrial assessment clarify priority waste streams and States to most effectively mitigate impact. With further knowledge of PWB manufacturing processes, select alternative chemical processes (e.g., spent copper etchant recovery) and material options (e.g., lead-free etch resist) are discussed. In addition, an investigation on technology transition effects for computers and televisions in the U.S. market is performed by linking dynamic materials flow and environmental assessment models. The analysis forecasts quantities of waste units generated and maps shifts in environmental impact potentials associated with metal composition changes due to product substitutions. This insight is important to understand the timing and waste quantities expected and the emerging toxic elements needed to be addressed as a consequence of technology transition. At the product level, electronic utility meter devices are evaluated to eliminate hazardous materials within product components. Development and application of a component Toxic Potential Indicator (TPI) assessment methodology highlights priority components requiring material alternatives. Alternative recommendations are provided and substitute materials such as aluminum alloys for stainless steel and high-density polyethylene for polyvinyl chloride and acrylonitrile-based polymers show promise to meet toxicity reduction, cost, and material functionality requirements. Furthermore, the TPI method, an European Union focused screening tool, is customized to reflect regulated U.S. toxicity parameters. Results show that, although it is possible to adopt U.S. parameters into the TPI method, harmonization of toxicity regulation and standards in various nations and regions is necessary to eliminate inconsistencies during hazard screening of substances used globally. As a whole, the present work helps to assimilate material hazard assessment methods into the larger framework of design for environment strategies so toxics use reduction could be achieved for the development and management of electronics and other consumer goods.

Household hazardous waste in municipal landfills: contaminants in leachate.

PubMed

Slack, R J; Gronow, J R; Voulvoulis, N

2005-01-20

Household hazardous waste (HHW) includes waste from a number of household products such as paint, garden pesticides, pharmaceuticals, photographic chemicals, certain detergents, personal care products, fluorescent tubes, waste oil, heavy metal-containing batteries, wood treated with dangerous substances, waste electronic and electrical equipment and discarded CFC-containing equipment. Data on the amounts of HHW discarded are very limited and are hampered by insufficient definitions of what constitutes HHW. Consequently, the risks associated with the disposal of HHW to landfill have not been fully elucidated. This work has focused on the assessment of data concerning the presence of hazardous chemicals in leachates as evidence of the disposal of HHW in municipal landfills. Evidence is sought from a number of sources on the occurrence in landfill leachates of hazardous components (heavy metals and xenobiotic organic compounds [XOC]) from household products and the possible disposal-to-emissions pathways occurring within landfills. This review demonstrates that a broad range of xenobiotic compounds occurring in leachate can be linked to HHW but further work is required to assess whether such compounds pose a risk to the environment and human health as a result of leakage/seepage or through treatment and discharge.

76 FR 13514 - National Emission Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-14

... National Emission Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources AGENCY... Emission Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources. Among the... Emission Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources (CMAS) on October...

CLEANER SYNTHESIS OF ORGANIC COMPOUNDS USING NANO-STRUCTURED TIO2 PREPARED BY FLAME AEROSOL METHOD

EPA Science Inventory

The chemical industry is a significant component of the domestic economy, generating well over $250 billion in sales and a trade surplus exceeding $15 billion in each of the last 5 years. The industry is also a major source of industrial waste and is the dominant source of hazard...

A GIS-based generic real-time risk assessment framework and decision tools for chemical spills in the river basin.

PubMed

Jiang, Jiping; Wang, Peng; Lung, Wu-seng; Guo, Liang; Li, Mei

2012-08-15

This paper presents a generic framework and decision tools of real-time risk assessment on Emergency Environmental Decision Support System for response to chemical spills in river basin. The generic "4-step-3-model" framework is able to delineate the warning area and the impact on vulnerable receptors considering four types of hazards referring to functional area, societal impact, and human health and ecology system. Decision tools including the stand-alone system and software components were implemented on GIS platform. A detailed case study on the Songhua River nitrobenzene spill illustrated the goodness of the framework and tool Spill first responders and decision makers of catchment management will benefit from the rich, visual and dynamic hazard information output from the software. Copyright © 2012 Elsevier B.V. All rights reserved.

Laboratory Safety and Chemical Hazards.

ERIC Educational Resources Information Center

Journal of Chemical Education, 1983

1983-01-01

Toxicology/chemical hazards, safety policy, legal responsibilities, adequacy of ventilation, chemical storage, evaluating experimental hazards, waste disposal, and laws governing chemical safety were among topics discussed in 10 papers presented at the Seventh Biennial Conference on Chemical Education (Stillwater, Oklahoma 1982). Several topics…

Toxics Release Inventory Chemical Hazard Information Profiles (TRI-CHIP) Dataset

EPA Pesticide Factsheets

The Toxics Release Inventory (TRI) Chemical Hazard Information Profiles (TRI-CHIP) dataset contains hazard information about the chemicals reported in TRI. Users can use this XML-format dataset to create their own databases and hazard analyses of TRI chemicals. The hazard information is compiled from a series of authoritative sources including the Integrated Risk Information System (IRIS). The dataset is provided as a downloadable .zip file that when extracted provides XML files and schemas for the hazard information tables.

Cytotoxic and phytotoxic effects of the main chemical components of spent pot-liner: a comparative approach.

PubMed

Palmieri, Marcel José; Luber, Jaquelini; Andrade-Vieira, Larissa Fonseca; Davide, Lisete Chamma

2014-03-15

Spent pot-liner (SPL) is a hazardous solid waste produced by the aluminum industry. Although its composition may vary, fluoride and cyanide salts as well as aluminum are predominant components. A seed-germination and root-elongation test was performed with Lactuca sativa seeds as a test system. SPL induced decrease of seed germination rate and root elongation. The concentration of 26.5g/L SPL was established from a regression curve as the IC50 (inhibition concentration 50%). Through chemical analyses, the concentrations of fluoride, cyanide and aluminum in SPL solutions of 26.5g/L (IC50), 39.75g/L (1.5IC50) and 13.25g/L (0.5IC50) were determined. Further, a cell-cycle test was conducted with root tips of L. sativa exposed to these same SPL solutions. All test chemicals presented toxic effects on meristematic cells of L. sativa. Aluminum was identified as the SPL component mainly responsible for reduction of the mitotic index. Chromosomal alterations resulted from the interactions among the three main chemical components of SPL, without a clear predominantly responsible agent. Induction of condensed nuclei was mainly due to effects of aluminum and fluoride, and may serve as an indicator of induced cell death. Copyright © 2014 Elsevier B.V. All rights reserved.

State of research: environmental pathways and food chain transfer.

PubMed Central

Vaughan, B E

1984-01-01

Data on the chemistry of biologically active components of petroleum, synthetic fuel oils, certain metal elements and pesticides provide valuable generic information needed for predicting the long-term fate of buried waste constituents and their likelihood of entering food chains. Components of such complex mixtures partition between solid and solution phases, influencing their mobility, volatility and susceptibility to microbial transformation. Estimating health hazards from indirect exposures to organic chemicals involves an ecosystem's approach to understanding the unique behavior of complex mixtures. Metabolism by microbial organisms fundamentally alters these complex mixtures as they move through food chains. Pathway modeling of organic chemicals must consider the nature and magnitude of food chain transfers to predict biological risk where metabolites may become more toxic than the parent compound. To obtain predictions, major areas are identified where data acquisition is essential to extend our radiological modeling experience to the field of organic chemical contamination. PMID:6428875

Evaluation of protein safety in the context of agricultural biotechnology.

PubMed

Delaney, Bryan; Astwood, James D; Cunny, Helen; Conn, Robin Eichen; Herouet-Guicheney, Corinne; Macintosh, Susan; Meyer, Linda S; Privalle, Laura; Gao, Yong; Mattsson, Joel; Levine, Marci

2008-05-01

One component of the safety assessment of agricultural products produced through biotechnology is evaluation of the safety of newly expressed proteins. The ILSI International Food Biotechnology Committee has developed a scientifically based two-tiered, weight-of-evidence strategy to assess the safety of novel proteins used in the context of agricultural biotechnology. Recommendations draw upon knowledge of the biological and chemical characteristics of proteins and testing methods for evaluating potential intrinsic hazards of chemicals. Tier I (potential hazard identification) includes an assessment of the biological function or mode of action and intended application of the protein, history of safe use, comparison of the amino acid sequence of the protein to other proteins, as well as the biochemical and physico-chemical properties of the proteins. Studies outlined in Tier II (hazard characterization) are conducted when the results from Tier I are not sufficient to allow a determination of safety (reasonable certainty of no harm) on a case-by-case basis. These studies may include acute and repeated dose toxicology studies and hypothesis-based testing. The application of these guidelines is presented using examples of transgenic proteins applied for agricultural input and output traits in genetically modified crops along with recommendations for future research considerations related to protein safety assessment.

EPCRA Tier II Emergency and Hazardous Chemical Inventory Form

EPA Pesticide Factsheets

Required for Emergency and Hazardous Chemical Inventory reporting. Must provide facility identification, chemical description, indication of physical and health hazards, inventory information, and storage details.

32 CFR 174.16 - Real property containing explosive or chemical agent hazards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... chemical agent hazards from past DoD military munitions-related or chemical warfare-related activities... 32 National Defense 1 2010-07-01 2010-07-01 false Real property containing explosive or chemical... REALIGNMENT Environmental Matters § 174.16 Real property containing explosive or chemical agent hazards. The...

32 CFR 174.16 - Real property containing explosive or chemical agent hazards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... chemical agent hazards from past DoD military munitions-related or chemical warfare-related activities... 32 National Defense 1 2014-07-01 2014-07-01 false Real property containing explosive or chemical... REALIGNMENT Environmental Matters § 174.16 Real property containing explosive or chemical agent hazards. The...

32 CFR 174.16 - Real property containing explosive or chemical agent hazards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... chemical agent hazards from past DoD military munitions-related or chemical warfare-related activities... 32 National Defense 1 2012-07-01 2012-07-01 false Real property containing explosive or chemical... REALIGNMENT Environmental Matters § 174.16 Real property containing explosive or chemical agent hazards. The...

32 CFR 174.16 - Real property containing explosive or chemical agent hazards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... chemical agent hazards from past DoD military munitions-related or chemical warfare-related activities... 32 National Defense 1 2013-07-01 2013-07-01 false Real property containing explosive or chemical... REALIGNMENT Environmental Matters § 174.16 Real property containing explosive or chemical agent hazards. The...

32 CFR 174.16 - Real property containing explosive or chemical agent hazards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... chemical agent hazards from past DoD military munitions-related or chemical warfare-related activities... 32 National Defense 1 2011-07-01 2011-07-01 false Real property containing explosive or chemical... REALIGNMENT Environmental Matters § 174.16 Real property containing explosive or chemical agent hazards. The...

30 CFR 48.8 - Annual refresher training of miners; minimum courses of instruction; hours of instruction.

Code of Federal Regulations, 2010 CFR

2010-07-01

... course component is when there are no explosives used or stored on the mine property. (10) Mine gases... gases. (11) Health. The course shall include instruction on the purpose of taking dust, noise, and other... subjects include, but are not limited to, information about the physical and health hazards of chemicals in...

[The key problems in the population exposure assessment of hazardous chemicals accidents].

PubMed

Pan, L J; Liu, F P; Zhang, X; Bai, X T; Shi, X M

2016-07-06

Serious accidents of hazardous chemicals can cause a variety of acute or chronic impairment in human health. The effects of hazardous chemicals on human health can be identified by carrying on population exposure assessment. Through analyzing the domestic and overseas population exposure assessment cases related to hazardous chemicals accidents, we summarized that the base and key of the population exposure assessment were to identify the characteristics of the chemicals , delimit the area and the population exposed to the chemicals, and collect the data of the monitored chemicals and the population health in the polluted area.

Iron phosphate compositions for containment of hazardous metal waste

DOEpatents

Day, Delbert E.

1998-01-01

An improved iron phosphate waste form for the vitrification, containment and long-term disposition of hazardous metal waste such as radioactive nuclear waste is provided. The waste form comprises a rigid iron phosphate matrix resulting from the cooling of a melt formed by heating a batch mixture comprising the metal waste and a matrix-forming component. The waste form comprises from about 30 to about 70 weight percent P.sub.2 O.sub.5 and from about 25 to about 50 weight percent iron oxide and has metals present in the metal waste chemically dissolved therein. The concentration of iron oxide in the waste form along with a high proportion of the iron in the waste form being present as Fe.sup.3+ provide a waste form exhibiting improved chemical resistance to corrosive attack. A method for preparing the improved iron phosphate waste forms is also provided.

Iron phosphate compositions for containment of hazardous metal waste

DOEpatents

Day, D.E.

1998-05-12

An improved iron phosphate waste form for the vitrification, containment and long-term disposition of hazardous metal waste such as radioactive nuclear waste is provided. The waste form comprises a rigid iron phosphate matrix resulting from the cooling of a melt formed by heating a batch mixture comprising the metal waste and a matrix-forming component. The waste form comprises from about 30 to about 70 weight percent P{sub 2}O{sub 5} and from about 25 to about 50 weight percent iron oxide and has metals present in the metal waste chemically dissolved therein. The concentration of iron oxide in the waste form along with a high proportion of the iron in the waste form being present as Fe{sup 3+} provide a waste form exhibiting improved chemical resistance to corrosive attack. A method for preparing the improved iron phosphate waste forms is also provided. 21 figs.

Environmental hazard and risk characterisation of petroleum substances: a guided "walking tour" of petroleum hydrocarbons.

PubMed

Bierkens, Johan; Geerts, Lieve

2014-05-01

Petroleum substances are used in large quantities, primarily as fuels. They are complex mixtures whose major constituents are hydrocarbons derived from crude oil by distillation and fractionation. Determining the complete molecular composition of petroleum and its refined products is not feasible with current analytical techniques because of the huge number of molecular components. This complex nature of petroleum products, with their varied number of constituents, all of them exhibiting different fate and effect characteristics, merits a dedicated hazard and risk assessment approach. From a regulatory perspective they pose a great challenge in a number of REACH processes, in particular in the context of dossier and substance evaluation but also for priority setting activities. In order to facilitate the performance of hazard and risk assessment for petroleum substances the European oil company association, CONCAWE, has developed the PETROTOX and PETRORISK spreadsheet models. Since the exact composition of many petroleum products is not known, an underlying assumption of the PETROTOX and PETRORISK tools is that the behaviour and fate of a total petroleum substance can be simulated based on the physical-chemical properties of representative structures mapped to hydrocarbon blocks (HBs) and on the relative share of each HB in the total mass of the product. To assess how differing chemical compositions affect the simulated chemical fate and toxicity of hydrocarbon mixtures, a series of model simulations were run using an artificial petroleum substance, containing 386 (PETROTOX) or 160 (PETRORISK) HBs belonging to different chemical classes and molecular weight ranges, but with equal mass assigned to each of them. To this artificial petroleum substance a guided series of subsequent modifications in mass allocation to a delineated number of HBs belonging to different chemical classes and carbon ranges was performed, in what we perceived as a guided "walking tour" through the chemical space of petroleum substances. We show that the PETROTOX and PETRORISK predictions reflect changes in mass distribution introduced to selected HBs by affecting hazard and risk estimates in correspondence with what is expected based on physical-chemical properties of individual constituents in the corresponding HBs. Copyright © 2014 Elsevier Ltd. All rights reserved.

A general strategy for the chemical aspects of the safety assessment of extractables and leachables in pharmaceutical drug products: the chemical assessment triad.

PubMed

Jenke, Dennis

2012-01-01

During the course of their manufacturing, storage, and administration, pharmaceutical drug products come in contact with materials, components, and systems. Such contact may result in an interaction between the drug product and these entities. One such interaction is the migration of substances from these entities and into the drug product, which is of concern due to the potential toxicity of the migrating substances. In order to properly assess the risk and manage the hazard posed by migratory substances, it is necessary to establish the identities of the migratory substances and the levels to which they will accumulate in the finished drug product, as these two pieces of information establish the hazard posed by an individual substance and the magnitude of the patient exposure (dose). The process by which migrating compounds are discovered and identified, and by which their accumulation levels in a finished drug product are established, is termed chemical assessment. Because the development of a finished drug product is a long and complicated process, chemical assessment is most typically not a single action but rather a series of actions that together establish a process of risk management. It is the purpose of this manuscript to establish a high-level strategy, illustrated in the chemical assessment triad, which can be applied to such a risk management process. During the course of their manufacturing, storage, and administration, pharmaceutical drug products come in contact with materials, components, and systems. Such contact may result in an interaction between the drug product and these entities. One such interaction is the migration of substances from these entities and into the drug product, which is of concern due to the potential toxicity of the migrating substances. It is the purpose of this manuscript to outline a high-level strategy, illustrated in the chemical assessment triad, to chemically establish the safety risk related to the migrating substances.

In vitro methods for hazard assessment of industrial chemicals – opportunities and challenges

PubMed Central

Wong, Chin Lin; Ghassabian, Sussan; Smith, Maree T.; Lam, Ai-Leen

2015-01-01

Allergic contact dermatitis (ACD) is a delayed-type hypersensitivity immune reaction mediated by T-lymphocytes as a result of repeated exposure of an allergen primarily on skin. ACD accounts for up to 95% of occupational skin diseases, with epoxy resins implicated as one of the most common causes of ACD. Efficient high-throughput in vitro screening for accurate identification of compounds and materials that may pose hazardous risks in the workplace is crucial. At present, the murine local lymph node assay is the ‘method of choice’ for predicting the sensitizing potency of contact allergens. As the 3Rs principles of reduction, refinement, and replacement in animal testing has gained political and economic momentum, several in vitro screening methods have been developed for identifying potential contact allergens. To date, these latter methods have been utilized primarily to assess the skin sensitizing potential of the chemical components of cosmetic products with scant research attention as to the applicability of these methods to industrial chemicals, particularly epoxy resins. Herein we review the currently utilized in vitro methods and identify the knowledge gaps with regard to assessing the generalizability of in vitro screening methods for assessing the skin sensitizing potential of industrial chemicals. PMID:25999858

In vitro methods for hazard assessment of industrial chemicals - opportunities and challenges.

PubMed

Wong, Chin Lin; Ghassabian, Sussan; Smith, Maree T; Lam, Ai-Leen

2015-01-01

Allergic contact dermatitis (ACD) is a delayed-type hypersensitivity immune reaction mediated by T-lymphocytes as a result of repeated exposure of an allergen primarily on skin. ACD accounts for up to 95% of occupational skin diseases, with epoxy resins implicated as one of the most common causes of ACD. Efficient high-throughput in vitro screening for accurate identification of compounds and materials that may pose hazardous risks in the workplace is crucial. At present, the murine local lymph node assay is the 'method of choice' for predicting the sensitizing potency of contact allergens. As the 3Rs principles of reduction, refinement, and replacement in animal testing has gained political and economic momentum, several in vitro screening methods have been developed for identifying potential contact allergens. To date, these latter methods have been utilized primarily to assess the skin sensitizing potential of the chemical components of cosmetic products with scant research attention as to the applicability of these methods to industrial chemicals, particularly epoxy resins. Herein we review the currently utilized in vitro methods and identify the knowledge gaps with regard to assessing the generalizability of in vitro screening methods for assessing the skin sensitizing potential of industrial chemicals.

Environmental Risk Assessment: Spatial Analysis of Chemical Hazards and Risks in South Korea

NASA Astrophysics Data System (ADS)

Yu, H.; Heo, S.; Kim, M.; Lee, W. K.; Jong-Ryeul, S.

2017-12-01

This study identified chemical hazard and risk levels in Korea by analyzing the spatial distribution of chemical factories and accidents. The number of chemical factories and accidents in 5-km2 grids were used as the attribute value for spatial analysis. First, semi-variograms were conducted to examine spatial distribution patterns and to identify spatial autocorrelation of chemical factories and accidents. Semi-variograms explained that the spatial distribution of chemical factories and accidents were spatially autocorrelated. Second, the results of the semi-variograms were used in Ordinary Kriging to estimate chemical hazard and risk level. The level values were extracted from the Ordinary Kriging result and their spatial similarity was examined by juxtaposing the two values with respect to their location. Six peaks were identified in both the hazard and risk estimation result, and the peaks correlated with major cities in Korea. Third, the estimated hazard and risk levels were classified with geometrical interval and could be classified into four quadrants: Low Hazard and Low Risk (LHLR), Low Hazard and High Risk (LHHR), High Hazard and Low Risk (HHLR), and High Hazard and High Risk (HHHR). The 4 groups identified different chemical safety management issues in Korea; relatively safe LHLR group, many chemical reseller factories were found in HHLR group, chemical transportation accidents were in the LHHR group, and an abundance of factories and accidents were in the HHHR group. Each quadrant represented different safety management obstacles in Korea, and studying spatial differences can support the establishment of an efficient risk management plan.

Combustion diagnosis for analysis of solid propellant rocket abort hazards: Role of spectroscopy

NASA Astrophysics Data System (ADS)

Gill, W.; Cruz-Cabrera, A. A.; Donaldson, A. B.; Lim, J.; Sivathanu, Y.; Bystrom, E.; Haug, A.; Sharp, L.; Surmick, D. M.

2014-11-01

Solid rocket propellant plume temperatures have been measured using spectroscopic methods as part of an ongoing effort to specify the thermal-chemical-physical environment in and around a burning fragment of an exploded solid rocket at atmospheric pressures. Such specification is needed for launch safety studies where hazardous payloads become involved with large fragments of burning propellant. The propellant burns in an off-design condition producing a hot gas flame loaded with burning metal droplets. Each component of the flame (soot, droplets and gas) has a characteristic temperature, and it is only through the use of spectroscopy that their temperature can be independently identified.

Recycle of valuable products from oily cold rolling mill sludge

NASA Astrophysics Data System (ADS)

Liu, Bo; Zhang, Shen-gen; Tian, Jian-jun; Pan, De-an; Liu, Yang; Volinsky, Alex A.

2013-10-01

Oily cold rolling mill (CRM) sludge contains lots of iron and alloying elements along with plenty of hazardous organic components, which makes it as an attractive secondary source and an environmental contaminant at the same time. The compound methods of "vacuum distillation + oxidizing roasting" and "vacuum distillation + hydrogen reduction" were employed for the recycle of oily cold rolling mill sludge. First, the sludge was dynamically vacuum distilled in a rotating furnace at 50 r/min and 600°C for 3 h, which removed almost hazardous organic components, obtaining 89.2wt% ferrous resultant. Then, high purity ferric oxide powders (99.2wt%) and reduced iron powders (98.9wt%) were obtained when the distillation residues were oxidized and reduced, respectively. The distillation oil can be used for fuel or chemical feedstock, and the distillation gases can be collected and reused as a fuel.

46 CFR 189.25-47 - Chemical and explosive hazards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Chemical and explosive hazards. 189.25-47 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-47 Chemical and explosive hazards. (a) The marine inspector shall inspect every chemistry laboratory, scientific laboratory, and chemical storeroom...

46 CFR 189.25-47 - Chemical and explosive hazards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Chemical and explosive hazards. 189.25-47 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-47 Chemical and explosive hazards. (a) The marine inspector shall inspect every chemistry laboratory, scientific laboratory, and chemical storeroom...

77 FR 65135 - National Emission Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-25

.... On February 12, 2010, the American Chemistry Council and the Society of Chemical Manufacturers and... National Emission Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources AGENCY... Emission Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources (CMAS) that was...

75 FR 77760 - National Emission Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-14

.... 40 CFR 63.11494(e). On February 12, 2010, the American Chemistry Council and the Society of Chemical... Emission Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources AGENCY... Hazardous Air Pollutants for Chemical Manufacturing Area Sources. Among the provisions that EPA is...

46 CFR 189.25-47 - Chemical and explosive hazards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Chemical and explosive hazards. 189.25-47 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-47 Chemical and explosive hazards. (a) The marine inspector shall inspect every chemistry laboratory, scientific laboratory, and chemical storeroom...

46 CFR 189.25-47 - Chemical and explosive hazards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Chemical and explosive hazards. 189.25-47 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-47 Chemical and explosive hazards. (a) The marine inspector shall inspect every chemistry laboratory, scientific laboratory, and chemical storeroom...

46 CFR 189.25-47 - Chemical and explosive hazards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Chemical and explosive hazards. 189.25-47 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-47 Chemical and explosive hazards. (a) The marine inspector shall inspect every chemistry laboratory, scientific laboratory, and chemical storeroom...

76 FR 72216 - Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-22

... by developing a written Chemical Hygiene Plan (CHP) that describes standard operating procedures for...] Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of Management... requirements specified in the Standard on Occupational Exposure to Hazardous Chemicals in Laboratories (29 CFR...

29 CFR 1910.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2012 CFR

2012-07-01

... hazard or simple asphyxiant in accordance with the Hazard Communication Standard (§ 1910.1200). Health... whether a chemical is classified as a health hazard are detailed in appendix A of the Hazard Communication... mutagens in accordance with the Hazard Communication Standard (§ 1910.1200) shall be considered mutagens...

EPCRA Instructions to the Tier II Emergency and Hazardous Chemical Inventory Form

EPA Pesticide Factsheets

The form is required for Tier Two reporting of hazardous chemicals in quantities equal to or greater than established threshold amounts. Sections include chemical description, hazard categories from both EPA and OSHA, and storage details.

An open framework for automated chemical hazard assessment based on GreenScreen for Safer Chemicals: A proof of concept.

PubMed

Wehage, Kristopher; Chenhansa, Panan; Schoenung, Julie M

2017-01-01

GreenScreen® for Safer Chemicals is a framework for comparative chemical hazard assessment. It is the first transparent, open and publicly accessible framework of its kind, allowing manufacturers and governmental agencies to make informed decisions about the chemicals and substances used in consumer products and buildings. In the GreenScreen® benchmarking process, chemical hazards are assessed and classified based on 18 hazard endpoints from up to 30 different sources. The result is a simple numerical benchmark score and accompanying assessment report that allows users to flag chemicals of concern and identify safer alternatives. Although the screening process is straightforward, aggregating and sorting hazard data is tedious, time-consuming, and prone to human error. In light of these challenges, the present work demonstrates the usage of automation to cull chemical hazard data from publicly available internet resources, assign metadata, and perform a GreenScreen® hazard assessment using the GreenScreen® "List Translator." The automated technique, written as a module in the Python programming language, generates GreenScreen® List Translation data for over 3000 chemicals in approximately 30 s. Discussion of the potential benefits and limitations of automated techniques is provided. By embedding the library into a web-based graphical user interface, the extensibility of the library is demonstrated. The accompanying source code is made available to the hazard assessment community. Integr Environ Assess Manag 2017;13:167-176. © 2016 SETAC. © 2016 SETAC.

Mixtures and their risk assessment in toxicology.

PubMed

Mumtaz, Moiz M; Hansen, Hugh; Pohl, Hana R

2011-01-01

For communities generally and for persons living in the vicinity of waste sites specifically, potential exposures to chemical mixtures are genuine concerns. Such concerns often arise from perceptions of a site's higher than anticipated toxicity due to synergistic interactions among chemicals. This chapter outlines some historical approaches to mixtures risk assessment. It also outlines ATSDR's current approach to toxicity risk assessment. The ATSDR's joint toxicity assessment guidance for chemical mixtures addresses interactions among components of chemical mixtures. The guidance recommends a series of steps that include simple calculations for a systematic analysis of data leading to conclusions regarding any hazards chemical mixtures might pose. These conclusions can, in turn, lead to recommendations such as targeted research to fill data gaps, development of new methods using current science, and health education to raise awareness of residents and health care providers. The chapter also provides examples of future trends in chemical mixtures assessment.

A GHS-consistent approach to health hazard classification of petroleum substances, a class of UVCB substances.

PubMed

Clark, Charles R; McKee, Richard H; Freeman, James J; Swick, Derek; Mahagaokar, Suneeta; Pigram, Glenda; Roberts, Linda G; Smulders, Chantal J; Beatty, Patrick W

2013-12-01

The process streams refined from petroleum crude oil for use in petroleum products are among those designated by USEPA as UVCB substances (unknown or variable composition, complex reaction products and biological materials). They are identified on global chemical inventories with unique Chemical Abstract Services (CAS) numbers and names. The chemical complexity of most petroleum substances presents challenges when evaluating their hazards and can result in differing evaluations due to the varying level of hazardous constituents and differences in national chemical control regulations. Global efforts to harmonize the identification of chemical hazards are aimed at promoting the use of consistent hazard evaluation criteria. This paper discusses a systematic approach for the health hazard evaluation of petroleum substances using chemical categories and the United Nations (UN) Globally Harmonized System (GHS) of classification and labeling. Also described are historical efforts to characterize the hazard of these substances and how they led to the development of categories, the identification of potentially hazardous constituents which should be considered, and a summary of the toxicology of the major petroleum product groups. The use of these categories can increase the utility of existing data, provide better informed hazard evaluations, and reduce the amount of animal testing required. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

Shallow groundwater quality and associated non-cancer health risk in agricultural areas (Poyang Lake basin, China).

PubMed

Soldatova, Evgeniya; Sun, Zhanxue; Maier, Sofya; Drebot, Valeriia; Gao, Bai

2018-03-24

Owing to their accessibility, shallow groundwater is an essential source of drinking water in rural areas while usually being used without control by authorities. At the same time, this type of water resource is one of the most vulnerable to pollution, especially in regions with extensive agricultural activity. These factors increase the probability of adverse health effects in the population as a result of the consumption of shallow groundwater. In the present research, shallow groundwater quality in the agricultural areas of Poyang Lake basin was assessed according to world and national standards for drinking water quality. To evaluate non-cancer health risk from drinking groundwater, the hazard quotient from exposure to individual chemicals and hazard index from exposure to multiple chemicals were applied. It was found that, in shallow groundwater, the concentrations of 11 components (NO 3 - , NH 4 + , Fe, Mn, As, Al, rare NO 2 - , Se, Hg, Tl and Pb) exceed the limits referenced in the standards for drinking water. According to the health risk assessment, only five components (NO 3 - , Fe, As, rare NO 2 - and Mn) likely provoke non-cancer effects. The attempt to evaluate the spatial distribution of human health risk from exposure to multiple chemicals shows that the most vulnerable area is associated with territory characterised by low altitude where reducing or near-neutral conditions are formed (lower reaches of Xiushui and Ganjiang Rivers). The largest health risk is associated with the immune system and adverse dermal effects.

Hazardous Chemicals on the Job: A Workers Guide to Reducing Exposure.

ERIC Educational Resources Information Center

Conrad, Fran; Kayman, Lindsey

This guide is intended to assist workers in reducing their exposure to hazardous chemicals on the job. It describes a systematic preventive approach to hazardous chemicals that is based on the following steps: determining which chemicals are in use at a particular worksite (techniques for asking the company and steps to take if the company is…

Hazardous Chemical Fluorometer Development.

DTIC Science & Technology

1981-02-01

RD-0129 997 HAZARDOUS CHEMICAL FLUOROMETER DEYELOPNENT(U) JOHNS HOPKINS UNIV LAUREL RD APPLIED PHYSICS LAB 6 S KEYS FEB Bi JHU/RPL/EED-Bi-6B USCO-D...TEST CHART REr-CRT NO: Cr-n-79-81 Hazardous Chemical Fluorometer Development -- Gary S. Keys q Ft THE JOHNS HOPKINS UNIVERSITYqFt. ill) APPLIED PHYSICS...Connecticut 06340 - 0 I CG-D-79-81/ Ah 7_> Hazardous Chemical Fluorometer Development February 1981 88898 7. ,~rrro z 9. NO-0.C as, 0-a ., AII=q1. Wo

Chemical Emergencies

MedlinePlus

When a hazardous chemical has been released, it may harm people's health. Chemical releases can be unintentional, as in the case of an ... the case of a terrorist attack with a chemical weapon. Some hazardous chemicals have been developed by ...

Functions of an engineered barrier system for a nuclear waste repository in basalt

NASA Astrophysics Data System (ADS)

Coons, W. E.; Moore, E. L.; Smith, M. J.; Kaser, J. D.

1980-01-01

The functions of components selected for an engineered barrier system for a nuclear waste repository in basalt are defined providing a focal point for barrier material research and development by delineating the purpose and operative lifetime of each component of the engineered system. A five component system (comprised of waste form, canister, buffer, overpack, and tailored backfill) is discussed. Redundancy is provided by subsystems of physical and chemical barriers which act in concert with the geology to provide a formidable barrier to transport of hazardous materials to the biosphere. The barrier system is clarified by examples pertinent to storage in basalt, and a technical approach to barrier design and material selection is proposed.

An integrated decision model for the application of airborne sensors for improved response to accidental and terrorist chemical vapor releases

NASA Astrophysics Data System (ADS)

Kapitan, Loginn

This research created a new model which provides an integrated approach to planning the effective selection and employment of airborne sensor systems in response to accidental or intentional chemical vapor releases. The approach taken was to use systems engineering and decision analysis methods to construct a model architecture which produced a modular structure for integrating both new and existing components into a logical procedure to assess the application of airborne sensor systems to address chemical vapor hazards. The resulting integrated process model includes an internal aggregation model which allowed differentiation among alternative airborne sensor systems. Both models were developed and validated by experts and demonstrated using appropriate hazardous chemical release scenarios. The resultant prototype integrated process model or system fills a current gap in capability allowing improved planning, training and exercise for HAZMAT teams and first responders when considering the selection and employment of airborne sensor systems. Through the research process, insights into the current response structure and how current airborne capability may be most effectively used were generated. Furthermore, the resultant prototype system is tailorable for local, state, and federal application, and can potentially be modified to help evaluate investments in new airborne sensor technology and systems. Better planning, training and preparedness exercising holds the prospect for the effective application of airborne assets for improved response to large scale chemical release incidents. Improved response will result in fewer casualties and lives lost, reduced economic impact, and increased protection of critical infrastructure when faced with accidental and intentional terrorist release of hazardous industrial chemicals. With the prospect of more airborne sensor systems becoming available, this prototype system integrates existing and new tools into an effective process for the selection and employment of airborne sensors to better plan, train and exercise ahead of potential chemical release events.

Occupational safety and health, green chemistry, and sustainability: a review of areas of convergence

PubMed Central

2013-01-01

With increasing numbers and quantities of chemicals in commerce and use, scientific attention continues to focus on the environmental and public health consequences of chemical production processes and exposures. Concerns about environmental stewardship have been gaining broader traction through emphases on sustainability and “green chemistry” principles. Occupational safety and health has not been fully promoted as a component of environmental sustainability. However, there is a natural convergence of green chemistry/sustainability and occupational safety and health efforts. Addressing both together can have a synergistic effect. Failure to promote this convergence could lead to increasing worker hazards and lack of support for sustainability efforts. The National Institute for Occupational Safety and Health has made a concerted effort involving multiple stakeholders to anticipate and identify potential hazards associated with sustainable practices and green jobs for workers. Examples of potential hazards are presented in case studies with suggested solutions such as implementing the hierarchy of controls and prevention through design principles in green chemistry and green building practices. Practical considerations and strategies for green chemistry, and environmental stewardship could benefit from the incorporation of occupational safety and health concepts which in turn protect affected workers. PMID:23587312

Occupational safety and health, green chemistry, and sustainability: a review of areas of convergence.

PubMed

Schulte, Paul A; McKernan, Lauralynn T; Heidel, Donna S; Okun, Andrea H; Dotson, Gary Scott; Lentz, Thomas J; Geraci, Charles L; Heckel, Pamela E; Branche, Christine M

2013-04-15

With increasing numbers and quantities of chemicals in commerce and use, scientific attention continues to focus on the environmental and public health consequences of chemical production processes and exposures. Concerns about environmental stewardship have been gaining broader traction through emphases on sustainability and "green chemistry" principles. Occupational safety and health has not been fully promoted as a component of environmental sustainability. However, there is a natural convergence of green chemistry/sustainability and occupational safety and health efforts. Addressing both together can have a synergistic effect. Failure to promote this convergence could lead to increasing worker hazards and lack of support for sustainability efforts. The National Institute for Occupational Safety and Health has made a concerted effort involving multiple stakeholders to anticipate and identify potential hazards associated with sustainable practices and green jobs for workers. Examples of potential hazards are presented in case studies with suggested solutions such as implementing the hierarchy of controls and prevention through design principles in green chemistry and green building practices. Practical considerations and strategies for green chemistry, and environmental stewardship could benefit from the incorporation of occupational safety and health concepts which in turn protect affected workers.

FROM CONCEPT TO REALITY, IN-SITU DECOMMISSIONING OF THE P AND R REACTORS AT THE SAVANNAH RIVER SITE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Musall, J.; Blankenship, J.; Griffin, W.

2012-01-09

SRS recently completed an approximately three year effort to decommission two SRS reactors: P-Reactor (Building 105-P) and R-Reactor (Building 105-R). Completed in December 2011, the concurrent decommissionings marked the completion of two relatively complex and difficult facility disposition projects at the SRS. Buildings 105-P and 105-R began operating as production reactors in the early 1950s with the mission of producing weapons material (e.g., tritium and plutonium-239). The 'P' Reactor and was shutdown in 1991 while the 'R' Reactor and was shutdown in 1964. In the intervening period between shutdown and deactivation & decommissioning (D&D), Buildings 105-P and 105-R saw limitedmore » use (e.g., storage of excess heavy water and depleted uranium oxide). For Building 105-P, deactivation was initiated in April 2007 and was essentially complete by June 2010. For Building 105-R, deactivation was initiated in August 2008 and was essentially complete by September 2010. For both buildings, the primary objective of deactivation was to remove/mitigate hazards associated with the remaining hazardous materials, and thus prepare the buildings for in-situ decommissioning. Deactivation removed the following hazardous materials to the extent practical: combustibles/flammables, residual heavy water, acids, friable asbestos (as needed to protect workers performing deactivation and decommissioning), miscellaneous chemicals, lead/brass components, Freon(reg sign), oils, mercury/PCB containing components, mold and some radiologically-contaminated equipment. In addition to the removal of hazardous materials, deactivation included the removal of hazardous energy, exterior metallic components (representing an immediate fall hazard), and historical artifacts along with the evaporation of water from the two Disassembly Basins. Finally, so as to facilitate occupancy during the subsequent in-situ decommissioning, deactivation implemented repairs to the buildings and provided temporary power.« less

Environmental Hazards Education for Childbirth Educators

PubMed Central

Ondeck, Michele; Focareta, Judith

2009-01-01

The purpose of this article is to educate childbirth educators about environmental hazards and provide resources. Hazardous chemicals have been found in cord blood, placenta, meconium, and breastmilk samples. These chemicals include commonly known hazards such as lead, mercury, and environmental tobacco smoke, as well as some pesticides, solvents, products containing chlorine, and other chemicals referred to as “persistent organic pollutants.” The fetus is particularly vulnerable to environmental chemicals that can disrupt the developmental process at critical times during gestation. Childbirth educators are encouraged to inform themselves in order to inform childbearing families to take preventive action and explore alternative behaviors to reduce exposure to environmental hazards. PMID:20808430

Surrogate Poster Artist Concept

NASA Image and Video Library

2015-03-11

This artist's concept shows Surrogate, a robot that could one day assist in disasters or hazardous situations such as a dangerous chemical laboratory. Surrogate was designed and built at the Jet Propulsion Laboratory in Pasadena, California. Its components came from RoboSimian, another JPL-built robot designed for disaster relief and mitigation (see PIA19313). Surrogate rolls on a track rather than moving on its limbs. http://photojournal.jpl.nasa.gov/catalog/PIA19314

CHEMICAL SAFETY ALERTS-

EPA Science Inventory

Chemical Safety Alerts are short publications which explain specific hazards that have become evident through chemical accident investigation efforts. EPA has produced over a dozen Alerts to date. This year's Alert: Managing Chemical Reactivity Hazards

Fact Sheet: EPCRA Amendments to Emergency Planning and Notification; Emergency Release Notification and Hazardous Chemical Reporting

EPA Pesticide Factsheets

2008 minor revisions to the emergency planning and emergency release notification sections; as well as the revisions to hazardous chemical reporting regulations covering the Tier I and Tier II forms, and how to report hazardous chemicals in a mixture.

32 CFR 179.6 - Procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Chemical Warfare Materiel Hazard Evaluation (CHE) module. (1) The CHE module provides an evaluation of the chemical hazards associated with the physiological effects of CWM. The CHE module is used only when CWM are... used for evaluating the potential hazards posed by MC and other chemical contaminants. The HHE module...

46 CFR 189.20-25 - Chemical and explosive hazards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Chemical and explosive hazards. 189.20-25 Section 189.20-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS INSPECTION AND CERTIFICATION Initial Inspection § 189.20-25 Chemical and explosive hazards. (a) If installed...

46 CFR 189.20-25 - Chemical and explosive hazards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Chemical and explosive hazards. 189.20-25 Section 189.20-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS INSPECTION AND CERTIFICATION Initial Inspection § 189.20-25 Chemical and explosive hazards. (a) If installed...

46 CFR 189.20-25 - Chemical and explosive hazards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Chemical and explosive hazards. 189.20-25 Section 189.20-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS INSPECTION AND CERTIFICATION Initial Inspection § 189.20-25 Chemical and explosive hazards. (a) If installed...

46 CFR 189.20-25 - Chemical and explosive hazards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Chemical and explosive hazards. 189.20-25 Section 189.20-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS INSPECTION AND CERTIFICATION Initial Inspection § 189.20-25 Chemical and explosive hazards. (a) If installed...

46 CFR 189.20-25 - Chemical and explosive hazards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Chemical and explosive hazards. 189.20-25 Section 189.20-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS INSPECTION AND CERTIFICATION Initial Inspection § 189.20-25 Chemical and explosive hazards. (a) If installed...

Implementation of environmentally compliant cleaning and insulation bonding for MNASA

NASA Technical Reports Server (NTRS)

Hutchens, Dale E.; Keen, Jill M.; Smith, Gary M.; Dillard, Terry W.; Deweese, C. Darrell; Lawson, Seth W.

1995-01-01

Historically, many subscale and full-scale rocket motors have employed environmentally and physiologically harmful chemicals during the manufacturing process. This program examines the synergy and interdependency between environmentally acceptable materials for solid rocket motor insulation applications, bonding, corrosion inhibiting, painting, priming, and cleaning, and then implements new materials and processes in subscale motors. Tests have been conducted to eliminate or minimize hazardous chemicals used in the manufacture of modified-NASA materials test motor (MNASA) components and identify alternate materials and/or processes following NASA Operational Environmental Team (NOET) priorities. This presentation describes implementation of high pressure water refurbishment cleaning, aqueous precision cleaning using both Brulin 815 GD and Jettacin, and insulation case bonding using ozone depleting chemical (ODC) compliant primers and adhesives.

10 CFR 851.21 - Hazard identification and assessment.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... Procedures must include methods to: (1) Assess worker exposure to chemical, physical, biological, or safety workplace hazards through appropriate workplace monitoring; (2) Document assessment for chemical, physical... hazards; (6) Perform routine job activity-level hazard analyses; (7) Review site safety and health...

10 CFR 851.21 - Hazard identification and assessment.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Procedures must include methods to: (1) Assess worker exposure to chemical, physical, biological, or safety workplace hazards through appropriate workplace monitoring; (2) Document assessment for chemical, physical... hazards; (6) Perform routine job activity-level hazard analyses; (7) Review site safety and health...

Hazardous materials information hotline using System 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brower, J.E.; Fuchel, K.

1984-04-30

The Center for Assessment of Chemical and Physical Hazards (CACPH) at Brookhaven National Laboratory (BNL) has developed a computer hotline service for the Department of Energy (DOE) and its contractors. This service provides access to health and safety information for over 800 chemicals and hazardous materials. The data base uses System 2000 on a CDC 6600 and provides information on the chemical name and its synonyms, 17 categories of health and safety information, composition of chemical mixtures, categories of chemicals, use and hazards, and physical, chemical and toxicity attributes. In order to make this information available to people unfamiliar withmore » System 2000, a user-friendly interface was developed using a Fortran PLEX Program. 1 reference, 1 figure.« less

Relationship between chemical structure and the occupational asthma hazard of low molecular weight organic compounds

PubMed Central

Jarvis, J; Seed, M; Elton, R; Sawyer, L; Agius, R

2005-01-01

Aims: To investigate quantitatively, relationships between chemical structure and reported occupational asthma hazard for low molecular weight (LMW) organic compounds; to develop and validate a model linking asthma hazard with chemical substructure; and to generate mechanistic hypotheses that might explain the relationships. Methods: A learning dataset used 78 LMW chemical asthmagens reported in the literature before 1995, and 301 control compounds with recognised occupational exposures and hazards other than respiratory sensitisation. The chemical structures of the asthmagens and control compounds were characterised by the presence of chemical substructure fragments. Odds ratios were calculated for these fragments to determine which were associated with a likelihood of being reported as an occupational asthmagen. Logistic regression modelling was used to identify the independent contribution of these substructures. A post-1995 set of 21 asthmagens and 77 controls were selected to externally validate the model. Results: Nitrogen or oxygen containing functional groups such as isocyanate, amine, acid anhydride, and carbonyl were associated with an occupational asthma hazard, particularly when the functional group was present twice or more in the same molecule. A logistic regression model using only statistically significant independent variables for occupational asthma hazard correctly assigned 90% of the model development set. The external validation showed a sensitivity of 86% and specificity of 99%. Conclusions: Although a wide variety of chemical structures are associated with occupational asthma, bifunctional reactivity is strongly associated with occupational asthma hazard across a range of chemical substructures. This suggests that chemical cross-linking is an important molecular mechanism leading to the development of occupational asthma. The logistic regression model is freely available on the internet and may offer a useful but inexpensive adjunct to the prediction of occupational asthma hazard. PMID:15778257

Gendered bodies: recruitment, management and occupational health in northern Thailand's electronics factories.

PubMed

Theobald, Sally

2002-01-01

This paper explores workers' experiences and understandings of occupational health hazards in the electronics industries of northern Thailand. Women form the bulk of the lower-level workforce as operators responsible for assembling the parts that make up microchip components. Drawing data from 16 months of research in workers' dormitories, formal and informal interviews and questionnaire surveys, in this paper I explore how gender relations are central to the organization and experience of work in these industries. I identify "work process" health hazards resulting from the physical working environment, and "workplace" health hazards relating to the organizational and social pressures of the working environment. Musculoskeletal pain, eye strain, chemical exposure, stress, improper use of safety equipment and accidents all impact upon women workers' health. Additionally, risk behaviors such as amphetamine and alcohol use, and unprotected sex, are associated with the social context of factory work.

Informing Workers of Chemical Hazards: The OSHA Hazard Communication Standard.

ERIC Educational Resources Information Center

American Chemical Society, Washington, DC.

Practical information on how to implement a chemical-related safety program is outlined in this publication. Highlights of the federal Occupational Safety and Health Administrations (OSHA) Hazard Communication Standard are presented and explained. These include: (1) hazard communication requirements (consisting of warning labels, material safety…

Countermeasures to Hazardous Chemicals,

DTIC Science & Technology

1989-04-01

Chemical Engineers (AIChE), 3. Hazardous Materials Advisery, Council (HMAC), (not the same as the Memphis/Shelby County HMAC), 4. American Petroleum...retired chemical engineers , will volunteer to avos t the I wcal communities in their pl. ining efforts. S1i !NSTITrTE OF HAZARDOUS MATERIALS MANAGEMENT The... chemicals may be considered to be a man-made wind. Such large gas volumes can be produced by blowcr equipment incorporating surplus jet engines . Such blowers

Spill Safety

ERIC Educational Resources Information Center

Roy, Ken

2005-01-01

This article describes OSHA procedures for handling Occupational Exposure to Hazardous Chemicals in Laboratories. The Laboratory Standard requires a Chemical Hygiene Plan to address all aspects of working with hazardous chemicals. This includes dealing with chemical spills. Chemical spill kits or "spill crash carts" need to be available in case…

Hazard assessment of hydraulic fracturing chemicals using an indexing method.

PubMed

Hu, Guangji; Liu, Tianyi; Hager, James; Hewage, Kasun; Sadiq, Rehan

2018-04-01

The rapid expansion of unconventional natural gas production has triggered considerable public concerns, particularly regarding environmental and human health (EHH) risks posed by various chemical additives used in hydraulic fracturing (HF) operations. There is a need to assess the potential EHH hazards of additives used in real-world HF operations. In this study, HF additive and fracturing fluid data was acquired, and EHH hazards were assessed using an indexing approach. The indexing system analyzed chemical toxicological data of different ingredients contained within additives and produced an aggregated EHH safety index for each additive, along with an indicator describing the completeness of the chemical toxicological data. The results show that commonly used additives are generally associated with medium-level EHH hazards. In each additive category, ingredients of high EHH concern were identified, and the high hazard designation was primarily attributed to ingredients' high aquatic toxicity and carcinogenic effects. Among all assessed additive categories, iron control agents were identified as the greatest EHH hazards. Lack of information, such as undisclosed ingredients and chemical toxicological data gaps, has resulted in different levels of assessment uncertainties. In particular, friction reducers show the highest data incompleteness with regards to EHH hazards. This study reveals the potential EHH hazards associated with chemicals used in current HF field operations and can provide decision makers with valuable information to facilitate sustainable and responsible unconventional gas production. Copyright © 2017 Elsevier B.V. All rights reserved.

Estrogen Receptor Binding Affinity of Food Contact Material Components Estimated by QSAR.

PubMed

Sosnovcová, Jitka; Rucki, Marián; Bendová, Hana

2016-09-01

The presented work characterized components of food contact materials (FCM) with potential to bind to estrogen receptor (ER) and cause adverse effects in the human organism. The QSAR Toolbox, software application designed to identify and fill toxicological data gaps for chemical hazard assessment, was used. Estrogen receptors are much less of a lock-and-key interaction than highly specific ones. The ER is nonspecific enough to permit binding with a diverse array of chemical structures. There are three primary ER binding subpockets, each with different requirements for hydrogen bonding. More than 900 compounds approved as of FCM components were evaluated for their potential to bind on ER. All evaluated chemicals were subcategorized to five groups with respect to the binding potential to ER: very strong, strong, moderate, weak binder, and no binder to ER. In total 46 compounds were characterized as potential disturbers of estrogen receptor. Among the group of selected chemicals, compounds with high and even very high affinity to the ER binding subpockets were found. These compounds may act as gene activators and cause adverse effects in the organism, particularly during pregnancy and breast-feeding. It should be considered to carry out further in vitro or in vivo tests to confirm their potential to disturb the regulation of physiological processes in humans by abnormal ER signaling and subsequently remove these chemicals from the list of approved food contact materials. Copyright© by the National Institute of Public Health, Prague 2016

77 FR 41300 - Hazardous Chemical Reporting: Revisions to the Emergency and Hazardous Chemical Inventory Forms...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-13

... telecommunication industry stated that their substations or cell towers may be unmanned. Thus, these commenters... or the data field should be marked ``optional'' since certain locations, such as a cell tower with a... recognizes that some locations, such as a cell tower where hazardous chemicals may be stored could be...

40 CFR Table 1 to Subpart Vvvvvv... - Hazardous Air Pollutants Used To Determine Applicability of Chemical Manufacturing Operations

Code of Federal Regulations, 2010 CFR

2010-07-01

... Determine Applicability of Chemical Manufacturing Operations 1 Table 1 to Subpart VVVVVV of Part 63... Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 1 Table 1 to Subpart VVVVVV of Part 63—Hazardous Air Pollutants Used To Determine Applicability of...

40 CFR Table 1 to Subpart Vvvvvv... - Hazardous Air Pollutants Used To Determine Applicability of Chemical Manufacturing Operations

Code of Federal Regulations, 2013 CFR

2013-07-01

... Determine Applicability of Chemical Manufacturing Operations 1 Table 1 to Subpart VVVVVV of Part 63... Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 1 Table 1 to Subpart VVVVVV of Part 63—Hazardous Air Pollutants Used To Determine Applicability of...

40 CFR Table 1 to Subpart Vvvvvv... - Hazardous Air Pollutants Used To Determine Applicability of Chemical Manufacturing Operations

Code of Federal Regulations, 2014 CFR

2014-07-01

... Determine Applicability of Chemical Manufacturing Operations 1 Table 1 to Subpart VVVVVV of Part 63... Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 1 Table 1 to Subpart VVVVVV of Part 63—Hazardous Air Pollutants Used To Determine Applicability of...

40 CFR Table 1 to Subpart Vvvvvv... - Hazardous Air Pollutants Used To Determine Applicability of Chemical Manufacturing Operations

Code of Federal Regulations, 2011 CFR

2011-07-01

... Determine Applicability of Chemical Manufacturing Operations 1 Table 1 to Subpart VVVVVV of Part 63... Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 1 Table 1 to Subpart VVVVVV of Part 63—Hazardous Air Pollutants Used To Determine Applicability of...

40 CFR Table 1 to Subpart Vvvvvv... - Hazardous Air Pollutants Used To Determine Applicability of Chemical Manufacturing Operations

Code of Federal Regulations, 2012 CFR

2012-07-01

... Determine Applicability of Chemical Manufacturing Operations 1 Table 1 to Subpart VVVVVV of Part 63... Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources Pt. 63, Subpt. VVVVVV, Table 1 Table 1 to Subpart VVVVVV of Part 63—Hazardous Air Pollutants Used To Determine Applicability of...

SUBSTITUTION REACTIONS FOR THE DETOXIFICATION OF HAZARDOUS CHEMICALS

EPA Science Inventory

Chemical Treatment is one of several treatment techniques used for the remediation of toxic and hazardous chemicals. Chemical treatment in this report is defined as substitution of halogens by hydrogens for the conversion of halogenated organic toxicant into its native hydrocarb...

EPCRA Tier II Confidential Location Information Form

EPA Pesticide Factsheets

For reporting Tier Two chemicals on the Emergency and Hazardous Chemical Inventory. Requires chemical description, categorized physical and health hazards, inventory reporting range, type of storage, and storage conditions and locations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szluha, A.; Morrison, A.; Heckman, C.

Physico-chemical criteria were established and subjected to the chemical compounds listed in CHRIS to select those chemicals which are immiscible and float on water. This information was compiled in a menu-driven data base for easy access. As the result of this work, 294 CHRIS chemicals were found to be floaters. A literature review was conducted also to review available spill containment and recovery equipment and techniques for the application toward floating hazardous chemical spills. No single technology or equipment was found to effectively apply for the containment and recovery of spilled floating chemicals. Specific deficiencies and problems inherent in existingmore » technologies were identified. A hazard and toxicity ranking system was developed and applied to the floating chemicals for groupings by degrees of flammability and toxicity hazards. These groupings include highly flammable through noncombustible and highly toxic through non-toxic and the combination of degrees of hazards.« less

Bioanalytical evidence that chemicals in tattoo ink can induce adaptive stress responses.

PubMed

Neale, Peta A; Stalter, Daniel; Tang, Janet Y M; Escher, Beate I

2015-10-15

Tattooing is becoming increasingly popular, particularly amongst young people. However, tattoo inks contain a complex mixture of chemical impurities that may pose a long-term risk for human health. As a first step towards the risk assessment of these complex mixtures we propose to assess the toxicological hazard potential of tattoo ink chemicals with cell-based bioassays. Targeted modes of toxic action and cellular endpoints included cytotoxicity, genotoxicity and adaptive stress response pathways. The studied tattoo inks, which were extracted with hexane as a proxy for the bioavailable fraction, caused effects in all bioassays, with the red and yellow tattoo inks having the greatest response, particularly inducing genotoxicity and oxidative stress response endpoints. Chemical analysis revealed the presence of polycyclic aromatic hydrocarbons in the tested black tattoo ink at concentrations twice the recommended level. The detected polycyclic aromatic hydrocarbons only explained 0.06% of the oxidative stress response of the black tattoo ink, thus the majority of the effect was caused by unidentified components. The study indicates that currently available tattoo inks contain components that induce adaptive stress response pathways, but to evaluate the risk to human health further work is required to understand the toxicokinetics of tattoo ink chemicals in the body. Copyright © 2015 Elsevier B.V. All rights reserved.

Database for Safety-Oriented Tracking of Chemicals

NASA Technical Reports Server (NTRS)

Stump, Jacob; Carr, Sandra; Plumlee, Debrah; Slater, Andy; Samson, Thomas M.; Holowaty, Toby L.; Skeete, Darren; Haenz, Mary Alice; Hershman, Scot; Raviprakash, Pushpa

2010-01-01

SafetyChem is a computer program that maintains a relational database for tracking chemicals and associated hazards at Johnson Space Center (JSC) by use of a Web-based graphical user interface. The SafetyChem database is accessible to authorized users via a JSC intranet. All new chemicals pass through a safety office, where information on hazards, required personal protective equipment (PPE), fire-protection warnings, and target organ effects (TOEs) is extracted from material safety data sheets (MSDSs) and recorded in the database. The database facilitates real-time management of inventory with attention to such issues as stability, shelf life, reduction of waste through transfer of unused chemicals to laboratories that need them, quantification of chemical wastes, and identification of chemicals for which disposal is required. Upon searching the database for a chemical, the user receives information on physical properties of the chemical, hazard warnings, required PPE, a link to the MSDS, and references to the applicable International Standards Organization (ISO) 9000 standard work instructions and the applicable job hazard analysis. Also, to reduce the labor hours needed to comply with reporting requirements of the Occupational Safety and Health Administration, the data can be directly exported into the JSC hazardous- materials database.

Mercury and Hazardous Chemicals in Schools: A Manual for Students in Southeast Asia. EPA 747-R-08-002

ERIC Educational Resources Information Center

US Environmental Protection Agency, 2008

2008-01-01

Children and adolescents, up to approximately age 20, are more susceptible than adults to potential health risks from chemicals and environmental hazards. Hazardous chemicals can interrupt or alter the normal development of a child's body, leading to lasting damage. Since children are smaller than adults, similar levels of exposure to toxic…

Review of the Literature on Determinants of Chemical Hazard Information Recall among Workers and Consumers

PubMed Central

Sathar, Farzana; Dalvie, Mohamed Aqiel; Rother, Hanna-Andrea

2016-01-01

In many low and middle income countries (LMIC), workers’ and consumers’ only access to risk and hazard information in relation to the chemicals they use or work with is on the chemical label and safety data sheet. Recall of chemical hazard information is vital in order for label warnings and precautionary information to promote effective safety behaviors. A literature review, therefore, was conducted on determinants of chemical hazard information recall among workers and consumers globally. Since comprehension and recall are closely linked, the determinants of both were reviewed. Literature was reviewed from both online and print peer reviewed journals for all study designs and countries. This review indicated that the level of education, previous training and the inclusion of pictograms on the hazard communication material are all factors that contribute to the recall of hazard information. The influence of gender and age on recall is incongruent and remains to be explored. More research is required on the demographic predictors of the recall of hazard information, the effect of design and non-design factors on recall, the effect of training on the recall among low literate populations and the examining of different regions or contexts. PMID:27258291

Toxicity of a hazardous chemical mixture in the planarian, Dugesia dorotocephala

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramsdell, H.S.; Matthews, C.M.

1995-12-31

The responses of the planarian, Dugesia dorotocephala to toxic chemical mixtures representative of water contaminants associated with hazardous waste sites have been studied in laboratory experiments. These free-living flatworms are readily maintained under laboratory conditions and are a useful invertebrate model for toxicology studies. Their widespread occurrence also makes them potentially useful for environmental studies. Mature asexual Dugesia dorotocephala were exposed for 14 days to mixtures of seven contaminants frequently detected in water at hazardous waste sites. The complete 1X mixture contained both metals (As, 3.1 ppm; Cr, 0.7 ppm; Pb, 3.7 ppm) and organics (chloroform, 1.5 ppm; benzene, 5.0more » ppm; phenol, 3.4 ppm; trichloroethylene, 3.8 ppm). Groups of planaria were treated with the complete mixture at 0.1X, 1X and 10X concentrations. Additional groups were exposed to the metals-only or organics-only submixtures, also at 0.1X, 1X and 10X concentrations. Treatment solutions were renewed daily. Suppression of fissioning was observed in all of the 1X and 10X treatment groups. Significant mortality occurred only in the 10X complete and 1 0X metals-only treatments. It appears that the toxic effects of the complete mixture are primarily associated with the metal components.« less

Joint occupational and environmental pollution prevention strategies: a model for primary prevention.

PubMed

Armenti, Karla; Moure-Eraso, Rafael; Slatin, Craig; Geiser, Ken

2003-01-01

Occupational and environmental health issues are not always considered simultaneously when attempting to reduce or eliminate hazardous materials from our environment. Methods used to decrease exposure to hazardous chemicals in the workplace often lead to increased exposure in the environment and to the community outside the workplace. Conversely, efforts to control emissions of hazardous chemicals into the environment often lead to increased exposure to the workers inside the plant. There are government regulations in place that ensure a safe work environment or a safe outside environment; however, there is little integration of both approaches when considering the public's health as a whole. This article examines some of the reasons behind this dichotomy, focusing on the regulatory and policy frameworks with respect to workplace and environment that have resulted in the inability of the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA) to coordinate their efforts to protect public health. The components of the Pollution Prevention Act and its potential to serve as a model for integrating occupational and environmental health are discussed. Limitations regarding enforcement of pollution prevention, as well as its disconnection from the work environment are equally highlighted. The article finishes by examining the barriers to integrating the occupational and environmental health paradigms and the promotion of primary prevention in public health.

Hazard identification by methods of animal-based toxicology.

PubMed

Barlow, S M; Greig, J B; Bridges, J W; Carere, A; Carpy, A J M; Galli, C L; Kleiner, J; Knudsen, I; Koëter, H B W M; Levy, L S; Madsen, C; Mayer, S; Narbonne, J-F; Pfannkuch, F; Prodanchuk, M G; Smith, M R; Steinberg, P

2002-01-01

This paper is one of several prepared under the project "Food Safety In Europe: Risk Assessment of Chemicals in Food and Diet" (FOSIE), a European Commission Concerted Action Programme, organised by the International Life Sciences Institute, Europe (ILSI). The aim of the FOSIE project is to review the current state of the science of risk assessment of chemicals in food and diet, by consideration of the four stages of risk assessment, that is, hazard identification, hazard characterisation, exposure assessment and risk characterisation. The contribution of animal-based methods in toxicology to hazard identification of chemicals in food and diet is discussed. The importance of first applying existing technical and chemical knowledge to the design of safety testing programs for food chemicals is emphasised. There is consideration of the presently available and commonly used toxicity testing approaches and methodologies, including acute and repeated dose toxicity, reproductive and developmental toxicity, neurotoxicity, genotoxicity, carcinogenicity, immunotoxicity and food allergy. They are considered from the perspective of whether they are appropriate for assessing food chemicals and whether they are adequate to detect currently known or anticipated hazards from food. Gaps in knowledge and future research needs are identified; research on these could lead to improvements in the methods of hazard identification for food chemicals. The potential impact of some emerging techniques and toxicological issues on hazard identification for food chemicals, such as new measurement techniques, the use of transgenic animals, assessment of hormone balance and the possibilities for conducting studies in which common human diseases have been modelled, is also considered.

In Silico Screening-Level Prioritization of 8468 Chemicals Produced in OECD Countries to Identify Potential Planetary Boundary Threats.

PubMed

Reppas-Chrysovitsinos, Efstathios; Sobek, Anna; MacLeod, Matthew

2018-01-01

Legislation such as the Stockholm Convention and REACH aim to identify and regulate the production and use of chemicals that qualify as persistent organic pollutants (POPs) and very persistent and very bioaccumulative (vPvB) chemicals, respectively. Recently, a series of studies on planetary boundary threats proposed seven chemical hazard profiles that are distinct from the POP and vPvB profiles. We previously defined two exposure-based hazard profiles; airborne persistent contaminants (APCs) and waterborne persistent contaminants (WPCs) that correspond to two profiles of chemicals that are planetary boundary threats. Here, we extend our method to screen a database of chemicals consisting of 8648 substances produced within the OECD countries. We propose a new scoring scheme to disentangle the POP, vPvB, APC and WPC profiles by focusing on the spatial range of exposure potential, discuss the relationship between high exposure hazard and elemental composition of chemicals, and identify chemicals with high exposure hazard potential.

Building 211 cyclotron characterization survey report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-03-30

The Building 211 Cyclotron Characterization Survey includes an assessment of the radioactive and chemical inventory of materials stored within the facility; an evaluation of the relative distribution of accelerator-produced activation products within various cyclotron components and adjacent structures; measurement of the radiation fields throughout the facility; measurement and assessment of internal and external radioactive surface contamination on various equipment, facility structures, and air-handling systems; and an assessment of lead (Pb) paint and asbestos hazards within the facility.

76 FR 50220 - Availability of Draft ICCVAM Recommendations on Using Fewer Animals to Identify Chemical Eye...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-12

... Fewer Animals to Identify Chemical Eye Hazards: Revised Criteria Necessary to Maintain Equivalent Hazard... criteria using results from 3-animal tests that would provide eye hazard classification equivalent to... least 1 positive animal in a 3-animal test to identify eye hazards will provide the same or greater...

Performance Assessment of Hazardous Air Pollutant (HAP)Free Chemical Paint Strippers on Military Coatings for Validation to Federal Specification TT-R-2918A

DTIC Science & Technology

2016-03-01

ARL-TN-0742 ● MAR 2016 US Army Research Laboratory Performance Assessment of Hazardous Air Pollutant (HAP)–Free Chemical Paint ...Free Chemical Paint Strippers on Military Coatings for Validation to Federal Specification TT-R-2918A by Lindsey Blohm Oak Ridge Institute for...COVERED (From - To) 1–30 April 2014 4. TITLE AND SUBTITLE Performance Assessment of Hazardous Air Pollutant (HAP)–Free Chemical Paint Strippers

Prediction and Prevention of Chemical Reaction Hazards: Learning by Simulation.

ERIC Educational Resources Information Center

Shacham, Mordechai; Brauner, Neima; Cutlip, Michael B.

2001-01-01

Points out that chemical hazards are the major cause of accidents in chemical industry and describes a safety teaching approach using a simulation. Explains a problem statement on exothermic liquid-phase reactions. (YDS)

A comparative evaluation of five hazard screening tools.

PubMed

Panko, J M; Hitchcock, K; Fung, M; Spencer, P J; Kingsbury, T; Mason, A M

2017-01-01

An increasing number of hazard assessment tools and approaches are being used in the marketplace as a means to differentiate products and ingredients with lower versus higher hazards or to certify what some call greener chemical ingredients in consumer products. Some leading retailers have established policies for product manufacturers and their suppliers to disclose chemical ingredients and their related hazard characteristics often specifying what tools to use. To date, no data exists that show a tool's reliability to provide consistent, credible screening-level hazard scores that can inform greener product selection. We conducted a small pilot study to understand and compare the hazard scoring of several hazard screening tools to determine if hazard and toxicity profiles for chemicals differ. Seven chemicals were selected that represent both natural and man-made chemistries as well as a range of toxicological activity. We conducted the assessments according to each tool provider's guidelines, which included factors such as endpoints, weighting preferences, sources of information, and treatment of data gaps. The results indicate the tools varied in the level of discrimination seen in the scores for these 7 chemicals and that tool classifications of the same chemical varied widely between the tools, ranging from little or no hazard or toxicity to very high hazard or toxicity. The results also highlight the need for transparency in describing the basis for the tool's hazard scores and suggest possible enhancements. Based on this pilot study, tools should not be generalized to fit all situations because their evaluations are context-specific. Before choosing a tool or approach, it is critical that the assessment rationale be clearly defined and matches the selected tool or approach. Integr Environ Assess Manag 2017;13:139-154. © 2016 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of SETAC. © 2016 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of SETAC.

Tier I Emergency and Hazardous Chemical Inventory Form

EPA Pesticide Factsheets

Form required for reporting chemicals by hazard type, maximum amount, average daily amount, number of days on-site, and general location. May be subject to Emergency Planning under EPCRA, or Chemical Accident Prevention under Risk Management Program.

Chemical alternatives assessment: the case of flame retardants.

PubMed

Howard, Gregory J

2014-12-01

Decisions on chemical substitution are made rapidly and by many stakeholders; these decisions may have a direct impact on consumer exposures, and, when a hazard exists, to consumer risks. Flame retardants (FRs) represent particular challenges, including very high production volumes, designed-in persistence, and often direct consumer exposure. Newer FR products, as with other industrial chemicals, typically lack data on hazard and exposure, and in many cases even basic information on structure and use in products is unknown. Chemical alternatives assessment (CAA) provides a hazard-focused approach to distinguishing between possible substitutions; variations on this process are used by several government and numerous corporate entities. By grouping chemicals according to functional use, some information on exposure potential can be inferred, allowing for decisions based on those hazard properties that are most distinguishing. This approach can help prevent the "regrettable substitution" of one chemical with another of equal, or even higher, risk. Copyright © 2014 Elsevier Ltd. All rights reserved.

A study of the impact of moist-heat and dry-heat treatment processes on hazardous trace elements migration in food waste.

PubMed

Chen, Ting; Jin, Yiying; Qiu, Xiaopeng; Chen, Xin

2015-03-01

Using laboratory experiments, the authors investigated the impact of dry-heat and moist-heat treatment processes on hazardous trace elements (As, Hg, Cd, Cr, and Pb) in food waste and explored their distribution patterns for three waste components: oil, aqueous, and solid components. The results indicated that an insignificant reduction of hazardous trace elements in heat-treated waste-0.61-14.29% after moist-heat treatment and 4.53-12.25% after dry-heat treatment-and a significant reduction in hazardous trace elements (except for Hg without external addition) after centrifugal dehydration (P < 0.5). Moreover, after heat treatment, over 90% of the hazardous trace elements in the waste were detected in the aqueous and solid components, whereas only a trace amount of hazardous trace elements was detected in the oil component (<0.01%). In addition, results indicated that heat treatment process did not significantly reduce the concentration of hazardous trace elements in food waste, but the separation process for solid and aqueous components, such as centrifugal dehydration, could reduce the risk considerably. Finally, combined with the separation technology for solid and liquid components, dry-heat treatment is superior to moist-heat treatment on the removal of external water-soluble ionic hazardous trace elements. An insignificant reduction of hazardous trace elements in heat-treated waste showed that heat treatment does not reduce trace elements contamination in food waste considerably, whereas the separation process for solid and aqueous components, such as centrifugal dehydration, could reduce the risk significantly. Moreover, combined with the separation technology for solid and liquid components, dry-heat treatment is superior to moist-heat treatment for the removal of external water-soluble ionic hazardous trace elements, by exploring distribution patterns of trace elements in three waste components: oil, aqueous, and solid components.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walters, Douglas B.; Ho, Pauline; Hardesty, Jasper

Many chemicals that are frequently used in laboratories and industries can be harmful if not handled properly. Chemical safety best practices are designed to protect people from accidentally being exposed to hazardous chemicals. On the other hand, chemical security best practices are designed to protect people from someone deliberately exposing others to hazardous chemicals. Finally, many chemical safety best practices overlap with chemical security best practices, but there are important differences, as will be discussed in this paper.

Undisclosed chemicals--implications for risk assessment: a case study from the mining industry.

PubMed

Singh, Khareen; Oates, Christopher; Plant, Jane; Voulvoulis, Nikolaos

2014-07-01

Many of the chemicals used in industry can be hazardous to human health and the environment, and some formulations can have undisclosed ingredients and hazards, increasing the uncertainty of the risks posed by their use. The need for a better understanding of the extent of undisclosed information in chemicals arose from collecting data on the hazards and exposures of chemicals used in typical mining operations (copper, platinum and coal). Four main categories of undisclosed chemicals were defined (incomplete disclosure; chemicals with unspecific identities; relative quantities of ingredients not stated; and trade secret ingredients) by reviewing material safety data sheet (MSDS) omissions in previous studies. A significant number of chemicals (20% of 957 different chemicals) across the three sites had a range of undisclosed information, with majority of the chemicals (39%) having unspecific identities. The majority of undisclosed information was found in commercially available motor oils followed by cleaning products and mechanical maintenance products, as opposed to reagents critical to the main mining processes. All three types of chemicals had trade secrets, unspecific chemical identities and incomplete disclosures. These types of undisclosed information pose a hindrance to a full understanding of the hazards, which is made worse when combined with additional MSDS omissions such as acute toxicity endpoints (LD50) and/or acute aquatic toxicity endpoints (LC50), as well as inadequate hazard classifications of ingredients. The communication of the hazard information in the MSDSs varied according to the chemical type, the manufacturer and the regulations governing the MSDSs. Undisclosed information can undermine occupational health protection, compromise the safety of workers in industry, hinder risk assessment procedures and cause uncertainty about future health. It comes down to the duty of care that industries have towards their employees. With a wide range of chemicals increasingly used, there is a balance that needs to be reached between disclosure requirements, trade secret provisions and definitions of hazardous ingredients for market needs, and the information required to protect the health of their workers. Copyright © 2014 Elsevier Ltd. All rights reserved.

30 CFR 47.52 - MSDS contents.

Code of Federal Regulations, 2014 CFR

2014-07-01

... an MSDS for a hazardous chemical produced at the mine, the MSDS must— (a) Be legible, accurate, and in English; (b) Use a chemical identity that permits cross-referencing between the list of hazardous chemicals, the chemical's label, and its MSDS; and (c) Contain information, or indicate if no information is...

30 CFR 47.52 - MSDS contents.

Code of Federal Regulations, 2011 CFR

2011-07-01

... an MSDS for a hazardous chemical produced at the mine, the MSDS must— (a) Be legible, accurate, and in English; (b) Use a chemical identity that permits cross-referencing between the list of hazardous chemicals, the chemical's label, and its MSDS; and (c) Contain information, or indicate if no information is...

30 CFR 47.52 - MSDS contents.

Code of Federal Regulations, 2013 CFR

2013-07-01

... an MSDS for a hazardous chemical produced at the mine, the MSDS must— (a) Be legible, accurate, and in English; (b) Use a chemical identity that permits cross-referencing between the list of hazardous chemicals, the chemical's label, and its MSDS; and (c) Contain information, or indicate if no information is...

30 CFR 47.52 - MSDS contents.

Code of Federal Regulations, 2012 CFR

2012-07-01

... an MSDS for a hazardous chemical produced at the mine, the MSDS must— (a) Be legible, accurate, and in English; (b) Use a chemical identity that permits cross-referencing between the list of hazardous chemicals, the chemical's label, and its MSDS; and (c) Contain information, or indicate if no information is...

Toxicity and biodegradability of high strength/toxic organic liquid industrial effluents and hazardous landfill leachates.

PubMed

Naidoo, V; du Preez, M; Rakgotho, T; Odhav, B; Buckley, C A

2002-01-01

Industrial effluents and leachates from hazardous landfill sites were tested for toxicity using the anaerobic toxicity assay. This test was done on several industrial effluents (brewery spent grain effluent, a chemical industry effluent, size effluent), and several hazardous landfill leachates giving vastly different toxicity results. The brewery effluent, spent grain effluent and size effluent were found to be less toxic than the chemical effluent and hazardous landfill leachate samples. The chemical industry effluent was found to be most toxic. Leachate samples from the H:h classified hazardous landfill site were found to be less toxic at high concentrations (40% (v/v)) while the H:H hazardous landfill leachate samples were found to be more toxic even at low concentrations of 4% (v/v). The 30 d biochemical methane potential tests revealed that the brewery effluent, organic spent grain effluent and size effluent were 89%, 63%, and 68% biodegradable, respectively. The leachate from Holfontein hazardous landfill site was least biodegradable (19%) while the chemical effluent and Aloes leachate were 29% and 32% biodegradable under anaerobic conditions.

Impact of climate change on waterborne diseases.

PubMed

Funari, Enzo; Manganelli, Maura; Sinisi, Luciana

2012-01-01

Change in climate and water cycle will challenge water availability but it will also increase the exposure to unsafe water. Floods, droughts, heavy storms, changes in rain pattern, increase of temperature and sea level, they all show an increasing trend worldwide and will affect biological, physical and chemical components of water through different paths thus enhancing the risk of waterborne diseases. This paper is intended, through reviewing the available literature, to highlight environmental changes and critical situations caused by floods, drought and warmer temperature that will lead to an increase of exposure to water related pathogens, chemical hazards and cyanotoxins. The final aim is provide knowledge-based elements for more focused adaptation measures.

Rapid detection of chemical hazards (toxins, dioxins, and PCBs) in seafood.

PubMed

Arvanitoyannis, Ioannis S; Kotsanopoulos, Konstantinos V; Papadopoulou, Anna

2014-01-01

Among the various hazards occurring in fish and seafood chemical hazards and in particular toxins (ciguatera, scombroid fish poisoning, paralytic shellfish poisoning, neurotoxic (brevetoxic) shellfish poisoning, puffer fish poisoning, diarrhetic shellfish poisoning) have an important place in food poisoning cases. On the other hand, some of the chemical hazards are often due to the pollution of the environment (heavy metals, dioxins, polychlorinated biphenyls, and halogenated aromatic hydrocarbons) and their detection is neither rapid nor facile. As a result there was a great need for developing new rapid and effective methods toward the chemical hazards determination mainly because of their high toxicity. The aim of this review is to provide the information about the new up-to-date detection techniques (Immunological, Chemical and Biochemical, and Molecular assays) in conjunction with detection limits. The latter is made possible by means of inclusion of seven comprehensive and, in most case cases, very extended tables. A reference is also made on the risk characterization of toxins as regards their importance to food contamination or poisoning.

Compensation for occupational diseases by chemical agents in Korea.

PubMed

Kwon, Soon-Chan; Roh, Soo-Yong; Lee, Ji-Hoon; Kim, Eun-A

2014-06-01

Investigation into the frequency of compensation for occupational diseases (ODs) caused by hazardous chemicals revealed an important opportunity for the improvement and further development of occupational health and safety systems in Korea. In response to concerns after outbreaks of disease due to chemical exposure, specific criteria for recognition of ODs were established and included in the Enforcement Decree of the Labor Standard Act (LSA) and the Industrial Accident Compensation Insurance Act (IACIA) on June 28, 2013. However, the original versions of the LSA and IACIA contain several limitations. First, the criteria was listed inconsistently according to the symptoms or signs of acute poisoning. Second, all newly recognized hazardous chemicals and chemicals recognized as hazardous by the International Labor Organization (ILO) were not included in the LSA and IACIA. Although recent amendments have addressed these shortcomings, future amendments should strive to include all chemicals listed by the ILO and continuously add newly discovered hazardous chemicals as they are introduced into the workplace.

Safety, security and dual-use chemicals

DOE PAGES

Walters, Douglas B.; Ho, Pauline; Hardesty, Jasper

2014-12-18

Many chemicals that are frequently used in laboratories and industries can be harmful if not handled properly. Chemical safety best practices are designed to protect people from accidentally being exposed to hazardous chemicals. On the other hand, chemical security best practices are designed to protect people from someone deliberately exposing others to hazardous chemicals. Finally, many chemical safety best practices overlap with chemical security best practices, but there are important differences, as will be discussed in this paper.

Prioritizing chemicals for environmental management in China based on screening of potential risks

NASA Astrophysics Data System (ADS)

Yu, Xiangyi; Mao, Yan; Sun, Jinye; Shen, Yingwa

2014-03-01

The rapid development of China's chemical industry has created increasing pressure to improve the environmental management of chemicals. To bridge the large gap between the use and safe management of chemicals, we performed a comprehensive review of the international methods used to prioritize chemicals for environmental management. By comparing domestic and foreign methods, we confirmed the presence of this gap and identified potential solutions. Based on our literature review, we developed an appropriate screening method that accounts for the unique characteristics of chemical use within China. The proposed method is based on an evaluation using nine indices of the potential hazard posed by a chemical: three environmental hazard indices (persistence, bioaccumulation, and eco-toxicity), four health hazard indices (acute toxicity, carcinogenicity, mutagenicity, and reproductive and developmental toxicity), and two environmental exposure hazard indices (chemical amount and utilization pattern). The results of our screening agree with results of previous efforts from around the world, confirming the validity of the new system. The classification method will help decisionmakers to prioritize and identify the chemicals with the highest environmental risk, thereby providing a basis for improving chemical management in China.

10 CFR 70.62 - Safety program and integrated safety analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Radiological hazards related to possessing or processing licensed material at its facility; (ii) Chemical hazards of licensed material and hazardous chemicals produced from licensed material; (iii) Facility... performed by a team with expertise in engineering and process operations. The team shall include at least...

Chemical Safety Alert: Identifying Chemical Reactivity Hazards Preliminary Screening Method

EPA Pesticide Factsheets

Introduces small-to-medium-sized facilities to a method developed by Center for Chemical Process Safety (CCPS), based on a series of twelve yes-or-no questions to help determine hazards in warehousing, repackaging, blending, mixing, and processing.

Chemical Carcinogen (Hydrazine, Polynuclear Hydrocarbon and/or Synthetic Jet Fuel Components) Induced Carcinogenesis of Human Cells, In Vitro

DTIC Science & Technology

1981-08-01

Various levels of DNA repair synthesis in Xeroderma pigmenrosum cells exposed to the carcinogens N-hydroxy and N-acetoxy-2-acetylsminofluorene...Nature (New Biol.). 238 (1972) 9. 5 V.M Maher, N. Birch, J.R. Otto and J. McCormick, Cytotoxicity of carcinogenic aro- matic amides in normal and Xeroderma ... pigmentosum fibroblasts with different DNA repair capabilities, J. Nati. Cancer Inst., 54 (1975) 1287. 6 R.H. Heflich, R.M. Hazard, L. Lommnel, J.D

76 FR 28336 - Domestic Licensing of Source Material-Amendments/Integrated Safety Analysis

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-17

... considered. The HF gas (and uranyl fluoride) is quickly produced from the chemical reaction that occurs when... worker's death was the inhalation of HF gas, which was produced from the chemical reaction of UF6 and..., would address both the radiological and chemical hazards from licensed material and hazardous chemicals...

Apparatus and methods for detecting chemical permeation

DOEpatents

Vo-Dinh, Tuan

1994-01-01

Apparatus and methods for detecting the permeation of hazardous or toxic chemicals through protective clothing are disclosed. The hazardous or toxic chemicals of interest do not possess the spectral characteristic of luminescence. The apparatus and methods utilize a spectrochemical modification technique to detect the luminescence quenching of an indicator compound which upon permeation of the chemical through the protective clothing, the indicator is exposed to the chemical, thus indicating chemical permeation.

Hazard Classification of Household Chemical Products in Korea according to the Globally Harmonized System of Classification and labeling of Chemicals.

PubMed

Kim, Kyung-Hee; Song, Dae-Jong; Yu, Myeong-Hyun; Park, Yuon-Shin; Noh, Hye-Ran; Kim, Hae-Joon; Choi, Jae-Wook

2013-07-16

This study was conducted to review the validity of the need for the application of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) to household chemical products in Korea. The study also aimed to assess the severity of health and environmental hazards of household chemical products using the GHS. 135 products were classified as 'cleaning agents and polishing agents' and 98 products were classified as 'bleaches, disinfectants, and germicides.' The current status of carcinogenic classification of GHS and carcinogenicity was examined for 272 chemical substances contained in household chemical products by selecting the top 11 products for each of the product categories. In addition, the degree of toxicity was assessed through analysis of whether the standard of the Republic of Korea's regulations on household chemical products had been exceeded or not. According to GHS health and environmental hazards, "acute toxicity (oral)" was found to be the highest for two product groups, 'cleaning agents and polishing agents', and 'bleaches, disinfectants, and germicides' (result of classification of 233 household chemical products) at 37.8% and 52.0% respectively. In an analysis of carcinogenicity assuming a threshold of IARC 2B for the substances in household chemical products, we found 'cleaning agents and polishing agents' to contain 12 chemical substances and 'bleaches, disinfectants, and germicides' 11 chemical substances. Some of the household chemical products were found to have a high hazard level including acute toxicity and germ cell mutagenicity, carcinogenicity, and reproductive toxicity. Establishing a hazard information delivery system including the application of GHS to household chemical products in Korea is urgent as well.

Hazard Classification of Household Chemical Products in Korea according to the Globally Harmonized System of Classification and labeling of Chemicals

PubMed Central

2013-01-01

Objectives This study was conducted to review the validity of the need for the application of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) to household chemical products in Korea. The study also aimed to assess the severity of health and environmental hazards of household chemical products using the GHS. Methods 135 products were classified as ‘cleaning agents and polishing agents’ and 98 products were classified as ‘bleaches, disinfectants, and germicides.’ The current status of carcinogenic classification of GHS and carcinogenicity was examined for 272 chemical substances contained in household chemical products by selecting the top 11 products for each of the product categories. In addition, the degree of toxicity was assessed through analysis of whether the standard of the Republic of Korea’s regulations on household chemical products had been exceeded or not. Results According to GHS health and environmental hazards, “acute toxicity (oral)” was found to be the highest for two product groups, ‘cleaning agents and polishing agents’, and ‘bleaches, disinfectants, and germicides’ (result of classification of 233 household chemical products) at 37.8% and 52.0% respectively. In an analysis of carcinogenicity assuming a threshold of IARC 2B for the substances in household chemical products, we found ‘cleaning agents and polishing agents’ to contain 12 chemical substances and ‘bleaches, disinfectants, and germicides’ 11 chemical substances. Conclusion Some of the household chemical products were found to have a high hazard level including acute toxicity and germ cell mutagenicity, carcinogenicity, and reproductive toxicity. Establishing a hazard information delivery system including the application of GHS to household chemical products in Korea is urgent as well. PMID:24472347

Size, Composition, and Source Profiles of Inhalable Bioaerosols from Colorado Dairies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schaeffer, Joshua W; Reynolds, Stephen; Magzamen, Sheryl

Particulate matter emissions from agricultural livestock operations contain both chemical and biological constituents that represent a potential human health hazard. The size and composition of these dusts, however, have not been well described. We evaluated the full size distribution (from 0 to 100 μm in aerodynamic diameter) and chemical/biological composition of inhalable dusts inside several Colorado dairy parlors. Four aerodynamic size fractions (<3, 3-10, 10-30, and >30 μm) were collected and analyzed using a combination of physiochemical techniques to understand the structure of bacterial communities and chemical constituents. Airborne particulate mass followed a bimodal size distribution (one mode at 3more » μm and a second above 30 μm), which also correlated with the relative concentrations of the following microbiological markers: bacterial endotoxin, 3-hydroxy fatty acids, and muramic acid. Sequencing of the 16S- rRNA components of this aerosol revealed a microbiome derived predominantly from animal sources. Bacterial genera included Staphlyococcus, Pseudomonas, and Streptococcus, all of which have proinflammatory and pathogenic capacity. Our results suggest that the size distribution of bioaerosols emitted by dairy operations extends well above 10 μm in diameter and contains a diverse mixture of potentially hazardous constituents and opportunistic pathogens. These findings should inform the development of more effective emissions control strategies.« less

Aquatic Toxicity Screening of an ACWA Secondary Waste, GB-Hydrolysate

DTIC Science & Technology

2009-01-01

Toxicity Comparison for GB-hydrolysates, Acetone, and Malathion Using O’Bryan and Ross Chemical Scoring System for Hazard and Exposure Identification ...hydrolysates, Acetone, and Malathion Using O’Bryan and Ross Chemical Scoring System for Hazard and Exposure Identification (5) and the U.S. Fish and...WWTF) or a TSDF. The toxicity results were ranked using the Chemical Scoring System for Hazard and Exposure Identification (5). This system is

Filter-based chemical sensors for hazardous materials

NASA Astrophysics Data System (ADS)

Major, Kevin J.; Ewing, Kenneth J.; Poutous, Menelaos K.; Sanghera, Jasbinder S.; Aggarwal, Ishwar D.

2014-05-01

The development of new techniques for the detection of homemade explosive devices is an area of intense research for the defense community. Such sensors must exhibit high selectivity to detect explosives and/or explosives related materials in a complex environment. Spectroscopic techniques such as FTIR are capable of discriminating between the volatile components of explosives; however, there is a need for less expensive systems for wide-range use in the field. To tackle this challenge we are investigating the use of multiple, overlapping, broad-band infrared (IR) filters to enable discrimination of volatile chemicals associated with an explosive device from potential background interferants with similar chemical signatures. We present an optical approach for the detection of fuel oil (the volatile component in ammonium nitrate-fuel oil explosives) that relies on IR absorption spectroscopy in a laboratory environment. Our proposed system utilizes a three filter set to separate the IR signals from fuel oil and various background interferants in the sample headspace. Filter responses for the chemical spectra are calculated using a Gaussian filter set. We demonstrate that using a specifically chosen filter set enables discrimination of pure fuel oil, hexanes, and acetone, as well as various mixtures of these components. We examine the effects of varying carrier gasses and humidity on the collected spectra and corresponding filter response. We study the filter response on these mixtures over time as well as present a variety of methods for observing the filter response functions to determine the response of this approach to detecting fuel oil in various environments.

Emergency planning and preparedness for the deliberate release of toxic industrial chemicals.

PubMed

Russell, David; Simpson, John

2010-03-01

Society in developed and developing countries is hugely dependent upon chemicals for health, wealth, and economic prosperity, with the chemical industry contributing significantly to the global economy. Many chemicals are synthesized, stored, and transported in vast quantities and classified as high production volume chemicals; some are recognized as being toxic industrial chemicals (TICs). Chemical accidents involving chemical installations and transportation are well recognized. Such chemical accidents occur with relative frequency and may result in large numbers of casualties with acute and chronic health effects as well as fatalities. The large-scale production of TICs, the potential for widespread exposure and significant public health impact, together with their relative ease of acquisition, makes deliberate release an area of potential concern. The large numbers of chemicals, together with the large number of potential release scenarios means that the number of possible forms of chemical incident are almost infinite. Therefore, prior to undertaking emergency planning and preparedness, it is necessary to prioritize risk and subsequently mitigate. This is a multi-faceted process, including implementation of industrial protection layers, substitution of hazardous chemicals, and relocation away from communities. Residual risk provides the basis for subsequent planning. Risk-prioritized emergency planning is a tool for identifying gaps, enhancing communication and collaboration, and for policy development. It also serves to enhance preparedness, a necessary prelude to preventing or mitigating the public health risk to deliberate release. Planning is an iterative and on-going process that requires multi-disciplinary agency input, culminating in the formation of a chemical incident plan complimentary to major incident planning. Preparedness is closely related and reflects a state of readiness. It is comprised of several components, including training and exercising. Toxicologists have a role to play in developing syndromic surveillance, recognizing clinical presentation of chemical incidents, developing toxicological datasheets, and the requisition and stockpiling of medical countermeasures. The chemical industry is global and many chemicals are synthesized and transported in vast quantities. Many of these chemicals are toxic and readily available, necessitating the need for identifying and assessing hazard and risks and subsequently planning and preparing for the deliberate release of TICs.

49 CFR 107.807 - Approval of non-domestic chemical analyses and tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false Approval of non-domestic chemical analyses and tests. 107.807 Section 107.807 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PROGRAM...

40 CFR Table 9 to Subpart Ffff of... - Soluble Hazardous Air Pollutants

Code of Federal Regulations, 2012 CFR

2012-07-01

... CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 9 Table 9 to Subpart FFFF of Part 63—Soluble Hazardous... and treatment requirements of this subpart FFFF are listed in the following table: Chemical name...

29 CFR 1910.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 6 2010-07-01 2010-07-01 false Occupational exposure to hazardous chemicals in laboratories. 1910.1450 Section 1910.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances §...

29 CFR 1910.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 6 2013-07-01 2013-07-01 false Occupational exposure to hazardous chemicals in laboratories. 1910.1450 Section 1910.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances §...

29 CFR 1910.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 6 2014-07-01 2013-07-01 true Occupational exposure to hazardous chemicals in laboratories. 1910.1450 Section 1910.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances §...

40 CFR 262.102 - What special definitions are included in this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Chemical means any chemical which is a physical hazard or a health hazard. A physical hazard means a... one study conducted in accordance with established scientific principles that acute or chronic health... physical extent of individual laboratories within an organization will be defined by the Environmental...

76 FR 48093 - Hazardous Chemical Reporting: Revisions to the Emergency and Hazardous Chemical Inventory Forms...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-08

... provisions to the Office of Information and Regulatory Affairs, Office of Management and Budget (OMB), Attn... information provided, unless the comment includes information claimed to be Confidential Business Information... EPA information about these programs and hazards in a risk management plan (RMP). The implementing...

30 CFR 47.92 - Exemptions from labeling.

Code of Federal Regulations, 2011 CFR

2011-07-01

... COMMUNICATION (HazCom) Exemptions § 47.92 Exemptions from labeling. A hazardous chemical is exempt from subpart... Chemicals Exempt from Labeling Exemption Conditions for exemption Chemical substance, consumer product, hazardous substance, or pesticide When kept in its manufacturer's or supplier's original packaging labeled...

30 CFR 47.92 - Exemptions from labeling.

Code of Federal Regulations, 2013 CFR

2013-07-01

... COMMUNICATION (HazCom) Exemptions § 47.92 Exemptions from labeling. A hazardous chemical is exempt from subpart... Chemicals Exempt from Labeling Exemption Conditions for exemption Chemical substance, consumer product, hazardous substance, or pesticide When kept in its manufacturer's or supplier's original packaging labeled...

30 CFR 47.92 - Exemptions from labeling.

Code of Federal Regulations, 2014 CFR

2014-07-01

... COMMUNICATION (HazCom) Exemptions § 47.92 Exemptions from labeling. A hazardous chemical is exempt from subpart... Chemicals Exempt from Labeling Exemption Conditions for exemption Chemical substance, consumer product, hazardous substance, or pesticide When kept in its manufacturer's or supplier's original packaging labeled...

30 CFR 47.92 - Exemptions from labeling.

Code of Federal Regulations, 2012 CFR

2012-07-01

... COMMUNICATION (HazCom) Exemptions § 47.92 Exemptions from labeling. A hazardous chemical is exempt from subpart... Chemicals Exempt from Labeling Exemption Conditions for exemption Chemical substance, consumer product, hazardous substance, or pesticide When kept in its manufacturer's or supplier's original packaging labeled...

Surveillance of Washington OSHA exposure data to identify uncharacterized or emerging occupational health hazards.

PubMed

Lofgren, Don J; Reeb-Whitaker, Carolyn K; Adams, Darrin

2010-07-01

Chemical substance exposure data from the Washington State Occupational Safety and Health Administration (OSHA) program were reviewed to determine if inspections conducted as a result of a report of a hazard from a complainant or referent may alert the agency to uncharacterized or emerging health hazards. Exposure and other electronically stored data from 6890 health inspection reports conducted between April 2003 and August 2008 were extracted from agency records. A total of 515 (7%) inspections with one or more personal airborne chemical substance samples were identified for further study. Inspections by report of a hazard and by targeting were compared for the following: number of inspections, number and percentage of inspections with workers exposed to substances above an agency's permissible exposure limit, types of industries inspected, and number and type of chemical substances assessed. Report of a hazard inspections documented work sites with worker overexposure at the same rate as agency targeted inspections (approximately 35% of the time), suggesting that complainants and referents are a credible pool of observers capable of directing the agency to airborne chemical substance hazards. Report of a hazard inspections were associated with significantly broader distribution of industries as well as a greater variety of chemical substance exposures than were targeted inspections. Narrative text that described business type and processes inspected was more useful than NAICS codes alone and critical in identifying processes and industries that may be associated with new hazards. Finally, previously identified emerging hazards were found among the report of a hazard data. These findings indicate that surveillance of OSHA inspection data can be a valid tool to identify uncharacterized and emerging health hazards. Additional research is needed to develop criteria for objective review and prioritization of the data for intervention. Federal OSHA and other state OSHA agencies will need to add electronic data entry fields more descriptive of industry, process, and substance to fully use agency exposure data for hazard surveillance.

Summary information of human health hazard assessment of existing chemical substances (I).

PubMed

Matsumoto, Mariko; Kobayashi, Katsumi; Takahashi, Mika; Hirata-Koizumi, Mutsuko; Ono, Atsushi; Hirose, Akihiko

2015-01-01

Under the Chemical Substances Control Law (CSCL) in Japan, initial hazard information tor existing chemical substances has been collected by the Ministry of Health, Labour and Welfare, Japan (MHLW) to assess potential initial risks to human health. We have reviewed all collected toxicity information pertaining to acute toxicity, repeated dose toxicity, genotoxicity, and/or reproductive/developmental toxicity and performed hazard assessments. Approximately 150 substances are currently undergoing review and assessment. For clarification and evaluation of each toxicity study, we have created a dossier (a collection of study data containing a detailed summary of the methods, results, and conclusions of each study) in English using the International Uniform Chemical Information Database (IUCLID) version 5. The IUCLID dossier format is widely used and has been accepted as one of the most beneficial formats for providing summarized chemical substance toxicity assessments. In this report, as a contribution to our ongoing hazard assessment activity, we present summary hazard information related to the potential human health effects of the following 5 chemical substances: 4-chlorobenzoyl chloride (CAS: 122-01-0); benzenesulfonic acid, 4-hydroxy-, tin (2+) salt (CAS: 70974- 33-3); chlorocyclohexane (CAS: 542-18-7); 1,3-cyclohexanedimethanamine (CAS: 2579-20-6); and 1,3,5-triazine-2,4,6 (1H,3H,5H) -trithione (CAS: 638-16-4). The IUCLID dossiers created for these 5 chemical substances will be made available via the Japan Existing Chemical Data Base (JECDB) at . Additional human health hazard information on existing chemical substances will be provided using the same methodology and website when it is available.

The situation of hazardous chemical accidents in China between 2000 and 2006.

PubMed

Duan, Weili; Chen, Guohua; Ye, Qing; Chen, Qingguang

2011-02-28

From the aspects of the total quantity of accidents, regional inequality, enterprises scale and environmental pollution accidents, this study makes an analysis of hazardous chemical accidents in China for the period spanning from 2000 to 2006. The following results are obtained: firstly, there were lots of accidents and fatalities in hazardous chemical business, i.e., the number of casualty accidents fluctuated between 200 and 600/year, the number of fatality fluctuated between 220 and 1100/year. Secondly, the accident rate in developed southeast coastal areas, e.g., Guangdong, Zhejiang and Jiangsu, was far higher than that in the northwest regions, e.g., Xizang, Xinjiang, and Qinghai. Thirdly, nearly 80% of dangerous chemical accidents had occurred in small and medium-sized enterprises (SMEs). Finally, various sudden environmental pollution accidents resulted from hazardous chemicals were frequent in recent years, causing a huge damage to human and property. Then, based on the readjustment of economic structure in the last decades, the development status of Occupational Health and Safety (OHS) in SMEs and other factors, the paper explores the main causes, which offers valuable insight into measures that should be taken to reduce hazardous chemical accidents. Copyright © 2010 Elsevier B.V. All rights reserved.

40 CFR 63.2430 - What is the purpose of this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical... national emission standards for hazardous air pollutants (NESHAP) for miscellaneous organic chemical...

40 CFR 63.2430 - What is the purpose of this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical... national emission standards for hazardous air pollutants (NESHAP) for miscellaneous organic chemical...

Articles of protective clothing adapted for deflecting chemical permeation and methods therefor

DOEpatents

Vo-Dinh, Tuan

1996-01-01

Apparatus and methods for detecting the permeation of hazardous or toxic chemicals through protective clothing are disclosed. The hazardous or toxic chemicals of interest do not possess the spectral characteristic of luminescence. The apparatus and methods utilize a spectrochemical modification technique to detect the luminescence quenching of an indicator compound which upon permeation of the chemical through the protective clothing, the indicator is exposed to the chemical, thus indicating chemical permeation.

Chemical Demonstrations: The Chem Demo Book. A Guide To Fun, Safe & Exciting Chemical Demonstrations. Second Edition.

ERIC Educational Resources Information Center

Wray, Thomas K.

Chemical demonstrations can and do enhance an otherwise potentially dull subjects--the properties of hazardous materials. This book contains the recipes for presenting several chemical demonstrations. Demonstrations are designed to be relatively easy to perform and present minimal hazards if done properly. The book contains an introduction, safety…

40 CFR 370.10 - Who must comply with the hazardous chemical reporting requirements of this part?

Code of Federal Regulations, 2010 CFR

2010-07-01

... chemical reporting requirements of this part? 370.10 Section 370.10 Protection of Environment ENVIRONMENTAL... CHEMICAL REPORTING: COMMUNITY RIGHT-TO-KNOW Who Must Comply § 370.10 Who must comply with the hazardous chemical reporting requirements of this part? (a) You must comply with the reporting requirements of this...

40 CFR 370.10 - Who must comply with the hazardous chemical reporting requirements of this part?

Code of Federal Regulations, 2011 CFR

2011-07-01

... chemical reporting requirements of this part? 370.10 Section 370.10 Protection of Environment ENVIRONMENTAL... CHEMICAL REPORTING: COMMUNITY RIGHT-TO-KNOW Who Must Comply § 370.10 Who must comply with the hazardous chemical reporting requirements of this part? (a) You must comply with the reporting requirements of this...

30 CFR 47.85 - Confidentiality agreement and remedies.

Code of Federal Regulations, 2011 CFR

2011-07-01

... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.85 Confidentiality agreement... trade secret chemical identity to the health purposes indicated in the written statement of need; (2... designated representative, or the health professional to disclose the trade secret chemical identity to MSHA...

30 CFR 47.85 - Confidentiality agreement and remedies.

Code of Federal Regulations, 2013 CFR

2013-07-01

... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.85 Confidentiality agreement... trade secret chemical identity to the health purposes indicated in the written statement of need; (2... designated representative, or the health professional to disclose the trade secret chemical identity to MSHA...

30 CFR 47.85 - Confidentiality agreement and remedies.

Code of Federal Regulations, 2014 CFR

2014-07-01

... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.85 Confidentiality agreement... trade secret chemical identity to the health purposes indicated in the written statement of need; (2... designated representative, or the health professional to disclose the trade secret chemical identity to MSHA...

30 CFR 47.85 - Confidentiality agreement and remedies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.85 Confidentiality agreement... trade secret chemical identity to the health purposes indicated in the written statement of need; (2... designated representative, or the health professional to disclose the trade secret chemical identity to MSHA...

1996 Site environmental report Sandia National Laboratories Albuquerque, New Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fink, C.H.; Duncan, D.; Sanchez, R.

1997-08-01

Sandia National Laboratories/New Mexico (SNL/NM) is operated in support of the U.S. Department of Energy (DOE) mission to provide weapon component technology and hardware for national security needs, and to conduct fundamental research and development (R&D) to advance technology in energy research, computer science, waste management, electronics, materials science, and transportation safety for hazardous and nuclear components. In support of this mission, the Environmental Safety and Health (ES&H) Center at SNL/NM conducts extensive environmental monitoring, surveillance, and compliance activities to assist SNL`s line organizations in meeting all applicable environmental regulations applicable to the site including those regulating radiological and nonradiologicalmore » effluents and emissions. Also herein are included, the status of environmental programs that direct and manage activities such as terrestrial surveillance; ambient air and meteorological monitoring; hazardous, radioactive, and solid waste management; pollution prevention and waste minimization; environmental restoration (ER); oil and chemical spill prevention; and National Environmental Policy Act (NEPA) documentation. This report has been prepared in compliance with DOE order 5400.1, General Environmental Protection.« less

40 CFR 63.2430 - What is the purpose of this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing What This Subpart... standards for hazardous air pollutants (NESHAP) for miscellaneous organic chemical manufacturing. This...

40 CFR 63.2430 - What is the purpose of this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

...) National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing What... emission standards for hazardous air pollutants (NESHAP) for miscellaneous organic chemical manufacturing...

40 CFR 63.2430 - What is the purpose of this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing What This Subpart... standards for hazardous air pollutants (NESHAP) for miscellaneous organic chemical manufacturing. This...

Unnecessary Chemicals

ERIC Educational Resources Information Center

Johnson, Anita

1978-01-01

Discusses the health hazards resulting from chemical additions of many common products such as cough syrups, food dyes, and cosmetics. Steps being taken to protect consumers from these health hazards are included. (MDR)

77 FR 41406 - Evaluation of In Vitro Tests for Identifying Eye Injury Hazard Potential of Chemicals and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-13

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Evaluation of In Vitro Tests for Identifying Eye Injury...-animal testing strategies proposed for identifying eye injury hazard potential of chemicals and products... Panel and submission of data from substances tested in in vitro tests for identifying eye injury hazard...

29 CFR 1915.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Occupational exposure to hazardous chemicals in laboratories. 1915.1450 Section 1915.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY... chemicals in laboratories. Note: The requirements applicable to shipyard employment under this section are...

29 CFR 1915.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Occupational exposure to hazardous chemicals in laboratories. 1915.1450 Section 1915.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY... chemicals in laboratories. Note: The requirements applicable to shipyard employment under this section are...

Prioritization of reproductive toxicants in unconventional oil and gas operations using a multi-country regulatory data-driven hazard assessment.

PubMed

Inayat-Hussain, Salmaan H; Fukumura, Masao; Muiz Aziz, A; Jin, Chai Meng; Jin, Low Wei; Garcia-Milian, Rolando; Vasiliou, Vasilis; Deziel, Nicole C

2018-08-01

Recent trends have witnessed the global growth of unconventional oil and gas (UOG) production. Epidemiologic studies have suggested associations between proximity to UOG operations with increased adverse birth outcomes and cancer, though specific potential etiologic agents have not yet been identified. To perform effective risk assessment of chemicals used in UOG production, the first step of hazard identification followed by prioritization specifically for reproductive toxicity, carcinogenicity and mutagenicity is crucial in an evidence-based risk assessment approach. To date, there is no single hazard classification list based on the United Nations Globally Harmonized System (GHS), with countries applying the GHS standards to generate their own chemical hazard classification lists. A current challenge for chemical prioritization, particularly for a multi-national industry, is inconsistent hazard classification which may result in misjudgment of the potential public health risks. We present a novel approach for hazard identification followed by prioritization of reproductive toxicants found in UOG operations using publicly available regulatory databases. GHS classification for reproductive toxicity of 157 UOG-related chemicals identified as potential reproductive or developmental toxicants in a previous publication was assessed using eleven governmental regulatory agency databases. If there was discordance in classifications across agencies, the most stringent classification was assigned. Chemicals in the category of known or presumed human reproductive toxicants were further evaluated for carcinogenicity and germ cell mutagenicity based on government classifications. A scoring system was utilized to assign numerical values for reproductive health, cancer and germ cell mutation hazard endpoints. Using a Cytoscape analysis, both qualitative and quantitative results were presented visually to readily identify high priority UOG chemicals with evidence of multiple adverse effects. We observed substantial inconsistencies in classification among the 11 databases. By adopting the most stringent classification within and across countries, 43 chemicals were classified as known or presumed human reproductive toxicants (GHS Category 1), while 31 chemicals were classified as suspected human reproductive toxicants (GHS Category 2). The 43 reproductive toxicants were further subjected to analysis for carcinogenic and mutagenic properties. Calculated hazard scores and Cytoscape visualization yielded several high priority chemicals including potassium dichromate, cadmium, benzene and ethylene oxide. Our findings reveal diverging GHS classification outcomes for UOG chemicals across regulatory agencies. Adoption of the most stringent classification with application of hazard scores provides a useful approach to prioritize reproductive toxicants in UOG and other industries for exposure assessments and selection of safer alternatives. Copyright © 2018 Elsevier Ltd. All rights reserved.

Inhalation toxicity studies: OECD guidelines in relation to REACH and scientific developments.

PubMed

Arts, Josje H E; Muijser, H; Jonker, D; van de Sandt, J J M; Bos, P M J; Feron, V J

2008-06-01

The OECD Health Effects Test Guidelines (TGs) provide guidance concerning the use of methods for the identification and characterization of hazards from chemical substances. These TGs are largely based on tests in routine use for many years and are known to yield information relevant to various types of toxicity. They have proven their value in practice and will remain of paramount importance for decades to come. However, the TGs describe mostly animal assays, and there is an increasingly strong urge to reduce animal testing on ethical grounds. In addition, assessment procedures are generally considered too slow and too rigid, which has resulted in elaborate testing of a relatively small number of chemicals, while virtually nothing is known about the vast majority of compounds. The major objectives of Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) are to improve the knowledge about the properties and use of chemicals and to speed up the procedure of risk assessment. The REACH text contains information requirements that can be met by OECD TGs but REACH also provides rules for adaptation of the standard testing regime. Also, various components of "Intelligent Testing Strategies" are described in order to limit animal testing. This paper briefly describes the OECD TGs for inhalation toxicity studies, including those in preparation, and their role in future hazard identification. This will be discussed in relation to the evaluation of the safety of thousands of chemicals in a relatively short period of time and scientific developments, including the use of alternatives to animal testing.

Articles of protective clothing adapted for deflecting chemical permeation and methods there for

DOEpatents

Vo-Dinh, T.

1996-02-27

Apparatus and methods for detecting the permeation of hazardous or toxic chemicals through protective clothing are disclosed. The hazardous or toxic chemicals of interest do not possess the spectral characteristic of luminescence. The apparatus and methods utilize a spectrochemical modification technique to detect the luminescence quenching of an indicator compound which upon permeation of the chemical through the protective clothing, the indicator is exposed to the chemical, thus indicating chemical permeation. 12 figs.

A Marine Hazardous Substances Data System. Volume 2.

DTIC Science & Technology

1985-12-01

substances are considered by the Task III panel ill to exhibit the greatest potential for occupational health effects and warrant the greatest precautions for...Hazards Branch 1111 N NIOSH Registry of Toxic Effects of Chemical Substances 1121 P NIOSH/OSHA Pocket Guideto Chemical Hazards [61 U Undocumented Source...NAS Hazard Liquid or -- Rating Vapor Irritant Solid Irritant Poisons 0 No effect No effect No effect 1 Slight Effect Causes skin Slightly toxic

Use of ceramics in point-focus solar receivers

NASA Technical Reports Server (NTRS)

Smoak, R. H.; Kudirka, A. A.

1981-01-01

One of the research and development efforts in the Solar Thermal Energy Systems Project at the Jet Propulsion Laboratory has been focused on application of ceramic components for advanced point-focus solar receivers. The impetus for this effort is a need for high efficiency, low cost solar receivers which operate in a temperature regime where use of metal components is impractical. The current status of the work on evaluation of ceramic components at JPL and elsewhere is outlined and areas where lack of knowledge is currently slowing application of ceramics are discussed. Future developments of ceramic processing technology and reliability assurance methodology should open up applications for the point-focus solar concentrator system in fuels and chemicals production, in thermochemical energy transport and storage, in detoxification of hazardous materials and in high temperature process heat as well as for electric power generation.

40 CFR 355.61 - How are key words in this part defined?

Code of Federal Regulations, 2011 CFR

2011-07-01

... includes manmade structures, as well as all natural structures in which chemicals are purposefully placed... agricultural products during a year. Hazardous chemical means any hazardous chemical as defined under 29 CFR... of a technically qualified individual; or (iii) In routine agricultural operations or is a fertilizer...

40 CFR 355.61 - How are key words in this part defined?

Code of Federal Regulations, 2014 CFR

2014-07-01

... includes manmade structures, as well as all natural structures in which chemicals are purposefully placed... agricultural products during a year. Hazardous chemical means any hazardous chemical as defined under 29 CFR... of a technically qualified individual; or (iii) In routine agricultural operations or is a fertilizer...

46 CFR 194.20-19 - Piping and electrical requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... VESSELS HANDLING, USE, AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Chemical Stores and/or... not be installed within or pass through a chemical storeroom except as required for the chemical... Subchapter J (Electrical Engineering) of this chapter for Class I, Division 1, Group C hazardous locations. ...

46 CFR 194.20-19 - Piping and electrical requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... VESSELS HANDLING, USE, AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Chemical Stores and/or... not be installed within or pass through a chemical storeroom except as required for the chemical... Subchapter J (Electrical Engineering) of this chapter for Class I, Division 1, Group C hazardous locations. ...

46 CFR 194.20-19 - Piping and electrical requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... VESSELS HANDLING, USE, AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Chemical Stores and/or... not be installed within or pass through a chemical storeroom except as required for the chemical... Subchapter J (Electrical Engineering) of this chapter for Class I, Division 1, Group C hazardous locations. ...

46 CFR 194.20-19 - Piping and electrical requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... VESSELS HANDLING, USE, AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Chemical Stores and/or... not be installed within or pass through a chemical storeroom except as required for the chemical... Subchapter J (Electrical Engineering) of this chapter for Class I, Division 1, Group C hazardous locations. ...

46 CFR 194.20-19 - Piping and electrical requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... VESSELS HANDLING, USE, AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Chemical Stores and/or... not be installed within or pass through a chemical storeroom except as required for the chemical... Subchapter J (Electrical Engineering) of this chapter for Class I, Division 1, Group C hazardous locations. ...

PREVENTION REFERENCE MANUAL: OVERVIEWS ON PREVENTING AND CONTROLLING ACCIDENTIAL RELEASES OF SELECTED TOXIC CHEMICALS

EPA Science Inventory

The manual can be used to orient personnel involved in inspecting and otherwise evaluating potential toxic chemical release hazards to the fundamentals of release hazard control for 13 of the specific chemicals chosen for evaluation under Section 305(b) of the Superfund Amendment...

30 CFR 47.41 - Requirement for container labels.

Code of Federal Regulations, 2011 CFR

2011-07-01

... replace an outdated label when a revised label is received from the chemical's manufacturer or supplier... container labels. (a) The operator must ensure that each container of a hazardous chemical has a label. If a... unreadable. (2) The operator must not remove or deface existing labels on containers of hazardous chemicals...

30 CFR 47.41 - Requirement for container labels.

Code of Federal Regulations, 2014 CFR

2014-07-01

... replace an outdated label when a revised label is received from the chemical's manufacturer or supplier... container labels. (a) The operator must ensure that each container of a hazardous chemical has a label. If a... unreadable. (2) The operator must not remove or deface existing labels on containers of hazardous chemicals...

30 CFR 47.41 - Requirement for container labels.

Code of Federal Regulations, 2013 CFR

2013-07-01

... replace an outdated label when a revised label is received from the chemical's manufacturer or supplier... container labels. (a) The operator must ensure that each container of a hazardous chemical has a label. If a... unreadable. (2) The operator must not remove or deface existing labels on containers of hazardous chemicals...

30 CFR 47.41 - Requirement for container labels.

Code of Federal Regulations, 2012 CFR

2012-07-01

... replace an outdated label when a revised label is received from the chemical's manufacturer or supplier... container labels. (a) The operator must ensure that each container of a hazardous chemical has a label. If a... unreadable. (2) The operator must not remove or deface existing labels on containers of hazardous chemicals...

Detection, identification, and quantification techniques for spills of hazardous chemicals

NASA Technical Reports Server (NTRS)

Washburn, J. F.; Sandness, G. A.

1977-01-01

The first 400 chemicals listed in the Coast Guard's Chemical Hazards Response Information System were evaluated with respect to their detectability, identifiability, and quantifiability by 12 generalized remote and in situ sensing techniques. Identification was also attempted for some key areas in water pollution sensing technology.

Identifying Hazards

EPA Pesticide Factsheets

The federal government has established a system of labeling hazardous materials to help identify the type of material and threat posed. Summaries of information on over 300 chemicals are maintained in the Envirofacts Master Chemical Integrator.

Obesity and Metabolic Comorbidities: Environmental Diseases?

PubMed Central

Lubrano, Carla; Genovesi, Giuseppe; Specchia, Palma; Costantini, Daniela; Mariani, Stefania; Petrangeli, Elisa; Lenzi, Andrea; Gnessi, Lucio

2013-01-01

Obesity and metabolic comorbidities represent increasing health problems. Endocrine disrupting compounds (EDCs) are exogenous agents that change endocrine function and cause adverse health effects. Most EDCs are synthetic chemicals; some are natural food components as phytoestrogens. People are exposed to complex mixtures of chemicals throughout their lives. EDCs impact hormone-dependent metabolic systems and brain function. Laboratory and human studies provide compelling evidence that human chemical contamination can play a role in obesity epidemic. Chemical exposures may increase the risk of obesity by altering the differentiation of adipocytes. EDCs can alter methylation patterns and normal epigenetic programming in cells. Oxidative stress may be induced by many of these chemicals, and accumulating evidence indicates that it plays important roles in the etiology of chronic diseases. The individual sensitivity to chemicals is variable, depending on environment and ability to metabolize hazardous chemicals. A number of genes, especially those representing antioxidant and detoxification pathways, have potential application as biomarkers of risk assessment. The potential health effects of combined exposures make the risk assessment process more complex compared to the assessment of single chemicals. Techniques and methods need to be further developed to fill data gaps and increase the knowledge on harmful exposure combinations. PMID:23577225

The applicability of chemical alternatives assessment for engineered nanomaterials.

PubMed

Hjorth, Rune; Hansen, Steffen Foss; Jacobs, Molly; Tickner, Joel; Ellenbecker, Michael; Baun, Anders

2017-01-01

The use of alternatives assessment to substitute hazardous chemicals with inherently safer options is gaining momentum worldwide as a legislative and corporate strategy to minimize consumer, occupational, and environmental risks. Engineered nanomaterials represent an interesting case for alternatives assessment approaches, because they can be considered both emerging "chemicals" of concern, as well as potentially safer alternatives to hazardous chemicals. However, comparing the hazards of nanomaterials to traditional chemicals or to other nanomaterials is challenging, and critical elements in chemical hazard and exposure assessment may have to be fundamentally altered to sufficiently address nanomaterials. The aim of this paper is to assess the overall applicability of alternatives assessment methods for nanomaterials and to outline recommendations to enhance their use in this context. The present paper focuses on the adaptability of existing hazard and exposure assessment approaches to engineered nanomaterials as well as strategies to design inherently safer nanomaterials. We argue that alternatives assessment for nanomaterials is complicated by the sheer number of nanomaterials possible. As a result, the inclusion of new data tools that can efficiently and effectively evaluate nanomaterials as substitutes is needed to strengthen the alternatives assessment process. However, we conclude that with additional tools to enhance traditional hazard and exposure assessment modules of alternatives assessment, such as the use of mechanistic toxicity screens and control banding tools, alternatives assessment can be adapted to evaluate engineered nanomaterials as potential substitutes for chemicals of concern and to ensure safer nanomaterials are incorporated in the design of new products. Integr Environ Assess Manag 2017;13:177-187. © 2016 SETAC. © 2016 SETAC.

Application of a hazard and operability study method to hazard evaluation of a chemical unit of the power station.

PubMed

Habibi, E; Zare, M; Barkhordari, A; Mirmohammadi, Sj; Halvani, Ghh

2008-12-28

The aim of this study was to identify the hazards, evaluate their risk factors and determine the measure for promotion of the process and reduction of accidents in the chemical unit of the power station. In this case and qualitative study, HAZOP technique was used to recognize the hazards and problems of operations on the chemical section at power station. Totally, 126 deviations were documented with various causes and consequences. Ranking and evaluation of identified risks indicate that the majority of deviations were categorized as "acceptable" and less than half of that were "unacceptable". The highest calculated risk level (1B) related to both the interruption of acid entry to the discharge pumps and an increased density of the acid. About 27% of the deviations had the lowest risk level (4B). The identification of hazards by HAZOP indicates that it could, systemically, assess and criticize the process of consumption or production of acid and alkali in the chemical unit of power plant.

Hazardous materials accidents: initial scene assessment and patient care.

PubMed

Leonard, R B

1993-06-01

Hazardous materials, i.e., chemicals that are toxic, corrosive, flammable, or explosive, are a ubiquitous aspect of modern life. They are manufactured throughout the United States, shipped by truck, train, barge, and pipeline, and stored at a wide variety of locations, including factories, military bases, and warehouses. Accidents involving hazardous materials present an added dimension of danger to emergency personnel arriving first at the scene, and have the potential to produce chemically contaminated patients who require special medical treatment. Personnel arriving first at the scene must understand how to evaluate the scene for fast and safe mitigation without endangering themselves. Chemically contaminated patients require prompt treatment, which, for optimal outcome, must begin at the scene. Although frequently the identification of the hazardous materials involved is not known initially, emergency personnel may safely provide medical care to the victims by understanding and following the principles of hazardous materials accidents and the pathophysiology of chemical injuries as presented in this paper.

A Chemical Plant Safety and Hazard Analysis Course.

ERIC Educational Resources Information Center

Gupta, J. P.

1989-01-01

Describes a course for teaching chemical engineering students about safety and hazards. Summarizes the course content including topics for term papers and disciplines related to this course. Lists 18 references. (YP)

78 FR 44132 - Food Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-23

... Advisory Committee will meet to discuss detection signals for noteworthy chemical hazards in foods, dietary supplements, and cosmetics and consider possible sources of information, data on chemical hazards, and how...

40 CFR Table 8 to Subpart Ffff of... - Partially Soluble Hazardous Air Pollutants

Code of Federal Regulations, 2010 CFR

2010-07-01

... CATEGORIES National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical... and treatment requirements in this subpart FFFF are listed in the following table: Chemical name...

Toxic hazards in aerial application.

DOT National Transportation Integrated Search

1962-04-01

An analysis of the hazards accompanying the aerial application of toxic pest-control chemicals are presented. The nature of teh chemicals, teh symptoms of toxicity, recommended treatment, and suggestions for safe-handling, are discussed

Land management decisions in a carbonatic geo-environment

NASA Astrophysics Data System (ADS)

Siska, P.; Hung, I.-K.

2017-10-01

Land is the uppermost territorial unit of the earth’s surface that is quasi-homogeneous in its physical, natural, and also anthropogenic properties. The fundamental component of land is lithosphere. The focus of this work is on a carbonatic geo-environment that is dominantly characterized by Mesozoic rock complexes, significant chemical weathering, and a set of landforms that are unique to this type of a geological structures. In general, optimal land management is a composite of land sharing and land sparing practices; however, in order to answer the question: ‘What is a parcel of land best suited for?’ often requires well-organized spatial data. In this work, we have focused on developing a model that would evaluate the suitability of a carbonatic geo-environment for land management practices. Due to the potential hazards of some sinkhole infested areas, the risk of natural hazards must be first evaluated. In addition, the level of hazards depends on population pressure and the intensity of human impact on this particular environment. In this research, we have applied the principles of geostatistics to evaluate the probabilities for sinkhole hazards as well as fuzzy logic to evaluate the suitability of land sharing and land sparing management.

Apparatus and methods for detecting chemical permeation

DOEpatents

Vo-Dinh, T.

1994-12-27

Apparatus and methods for detecting the permeation of hazardous or toxic chemicals through protective clothing are disclosed. The hazardous or toxic chemicals of interest do not possess the spectral characteristic of luminescence. The apparatus and methods utilize a spectrochemical modification technique to detect the luminescence quenching of an indicator compound which upon permeation of the chemical through the protective clothing, the indicator is exposed to the chemical, thus indicating chemical permeation. The invention also relates to the fabrication of protective clothing materials. 13 figures.

Improved Cook-off Modeling of Multi-component Cast Explosives

NASA Astrophysics Data System (ADS)

Nichols, Albert

2017-06-01

In order to understand the hazards associated with energetic materials, it is important to understand their behavior in adverse thermal environments. These processes have been relatively well understood for solid explosives, however, the same cannot be said for multi-component melt-cast explosives. Here we describe the continued development of ALE3D, a coupled thermal/chemical/mechanical code, to improve its description of fluid explosives. The improved physics models include: 1) Chemical potential driven species segregation. This model allows us to model the complex flow fields associated with the melting and decomposing Comp-B, where the denser RDX tends to settle and the decomposing gasses rise, 2) Automatically scaled stream-wise diffusion model for thermal, species, and momentum diffusion. These models add sufficient numerical diffusion in the direction of flow to maintain numerical stability when the system is under resolved, as occurs for large systems. And 3) a slurry viscosity model, required to properly define the flow characteristics of the multi-component fluidized system. These models will be demonstrated on a simple Comp-B system. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344.

Chemical Preparations Industry: National Emission Standards for Hazardous Air Pollutants for Area Sources

EPA Pesticide Factsheets

National emissions standards for control of hazardous air pollutants (HAP) from the chemical preparations area source category. Includes rule history, Federal Registry citations, implementation information, and additional resources.

30 CFR 47.83 - Disclosure in a medical emergency.

Code of Federal Regulations, 2011 CFR

2011-07-01

... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.83 Disclosure in a medical... confidentiality agreement, the operator must immediately disclose the identity of a trade secret chemical to the...

30 CFR 47.83 - Disclosure in a medical emergency.

Code of Federal Regulations, 2010 CFR

2010-07-01

... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.83 Disclosure in a medical... confidentiality agreement, the operator must immediately disclose the identity of a trade secret chemical to the...

30 CFR 47.83 - Disclosure in a medical emergency.

Code of Federal Regulations, 2014 CFR

2014-07-01

... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.83 Disclosure in a medical... confidentiality agreement, the operator must immediately disclose the identity of a trade secret chemical to the...

30 CFR 47.83 - Disclosure in a medical emergency.

Code of Federal Regulations, 2013 CFR

2013-07-01

... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.83 Disclosure in a medical... confidentiality agreement, the operator must immediately disclose the identity of a trade secret chemical to the...

Safety in the Chemical Laboratory: Hazards in a Photography Lab.

ERIC Educational Resources Information Center

Houk, Cliff; Hart, Charles

1987-01-01

Described are case studies illustrating chemical hazards in a photography lab due to compounds containing cyanide. Suggestions for preventing problems including proper procedures, housekeeping, facilities, and ventilation are considered. (RH)

[Nursing workers' perceptions regarding the handling of hazardous chemical waste].

PubMed

Costa, Taiza Florêncio; Felli, Vanda Elisa Andres; Baptista, Patrícia Campos Pavan

2012-12-01

The objectives of this study were to identify the perceptions of nursing workers regarding the handling of hazardous chemical waste at the University of São Paulo University Hospital (HU-USP), and develop a proposal to improve safety measures. This study used a qualitative approach and a convenience sample consisting of eighteen nursing workers. Data collection was performed through focal groups. Thematic analysis revealed four categories that gave evidence of training deficiencies in terms of the stages of handling waste. Difficulties that emerged included a lack of knowledge regarding exposure and its impact, the utilization of personal protective equipment versus collective protection, and suggestions regarding measures to be taken by the institution and workers for the safe handling of hazardous chemical waste. The present data allowed for recommending proposals regarding the safe management of hazardous chemical waste by the nursing staff.

Effects of toxic chemicals on the reproductive system. Council on Scientific Affairs.

PubMed

1985-06-21

In an effort to make physicians more aware of the hazards of the workplace to pregnant workers, the Council on Scientific Affairs' Advisory Panel on Reproductive Hazards in the Workplace prepared this third and final report reviewing the effects of chemical exposure. A total of 120 chemicals were considered for reviews based on an estimation of their imminent hazard, ie, widespread use and/or inherent toxicity. Following a brief introduction, which sets out general principles, clinical applications, and aids to the recognition of a human teratogen, the report presents reviews and opinions for three representative chemicals. Information concerning the remaining 117 compounds is available upon request.

Hazardous substances in frequently used professional cleaning products.

PubMed

Gerster, Fabian Melchior; Vernez, David; Wild, Pascal Pierre; Hopf, Nancy Brenna

2014-01-01

A growing number of studies have identified cleaners as a group at risk for adverse health effects of the skin and the respiratory tract. Chemical substances present in cleaning products could be responsible for these effects. Currently, only limited information is available about irritant and health hazardous chemical substances found in cleaning products. We hypothesized that chemical substances present in cleaning products are known health hazardous substances that might be involved in adverse health effects of the skin and the respiratory tract. We performed a systematic review of cleaning products used in the Swiss cleaning sector. We surveyed Swiss professional cleaning companies (n = 1476) to identify the most used products (n = 105) for inclusion. Safety data sheets (SDSs) were reviewed and hazardous substances present in cleaning products were tabulated with current European and global harmonized system hazard labels. Professional cleaning products are mixtures of substances (arithmetic mean 3.5 +/- 2.8), and more than 132 different chemical substances were identified in 105 products. The main groups of chemicals were fragrances, glycol ethers, surfactants, solvents; and to a lesser extent, phosphates, salts, detergents, pH-stabilizers, acids, and bases. Up to 75% of products contained irritant (Xi), 64% harmful (Xn) and 28% corrosive (C) labeled substances. Hazards for eyes (59%) and skin (50%), and hazards by ingestion (60%) were the most reported. Cleaning products potentially give rise to simultaneous exposures to different chemical substances. As professional cleaners represent a large workforce, and cleaning products are widely used, it is a major public health issue to better understand these exposures. The list of substances provided in this study contains important information for future occupational exposure assessment studies.

Hazardous substances in frequently used professional cleaning products

PubMed Central

Gerster, Fabian Melchior; Vernez, David; Wild, Pascal Pierre; Hopf, Nancy Brenna

2014-01-01

Background: A growing number of studies have identified cleaners as a group at risk for adverse health effects of the skin and the respiratory tract. Chemical substances present in cleaning products could be responsible for these effects. Currently, only limited information is available about irritant and health hazardous chemical substances found in cleaning products. We hypothesized that chemical substances present in cleaning products are known health hazardous substances that might be involved in adverse health effects of the skin and the respiratory tract. Methods: We performed a systematic review of cleaning products used in the Swiss cleaning sector. We surveyed Swiss professional cleaning companies (n = 1476) to identify the most used products (n = 105) for inclusion. Safety data sheets (SDSs) were reviewed and hazardous substances present in cleaning products were tabulated with current European and global harmonized system hazard labels. Results: Professional cleaning products are mixtures of substances (arithmetic mean 3.5±2.8), and more than 132 different chemical substances were identified in 105 products. The main groups of chemicals were fragrances, glycol ethers, surfactants, solvents; and to a lesser extent, phosphates, salts, detergents, pH-stabilizers, acids, and bases. Up to 75% of products contained irritant (Xi), 64% harmful (Xn) and 28% corrosive (C) labeled substances. Hazards for eyes (59%) and skin (50%), and hazards by ingestion (60%) were the most reported. Conclusions: Cleaning products potentially give rise to simultaneous exposures to different chemical substances. As professional cleaners represent a large workforce, and cleaning products are widely used, it is a major public health issue to better understand these exposures. The list of substances provided in this study contains important information for future occupational exposure assessment studies. PMID:24804339

77 FR 61610 - Interagency Coordinating Committee on the Validation of Alternative Methods Evaluation Report and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-10

... Chemical Eye Hazards With Fewer Animals; Availability of Report; Notice of Transmittal to Federal Agencies... (ICCVAM) test method evaluation report (TMER) that provides recommendations for identifying chemical eye... animals in a three-animal test to identify chemicals and products that are eye hazards will maintain...

Chemical hazards in aeromedical aircraft.

PubMed

Tupper, C R

1989-01-01

Several potentially hazardous chemicals are required to make modern military aircraft fly. With each airevac mission, the possibility exists for structural failure of a fluid system, resulting in contamination to flight/medical crews, patients, and passengers. Aeromedical Evacuation Crewmembers (AECMs) need to be aware of the hazardous chemicals used in aircraft and areas where there is an increased risk to those in and around the aircraft. This study identified potential areas for chemical leakage, such as refuel receptacles, hydraulic reservoirs, hydraulic motors, doors, ramps, engines, and more. Further, it identified the basic first aid procedures to perform on people contaminated with jet fuel, hydraulic fluid, engine oil, fire extinguisher agents, LOX and other fluids. First aid procedures are basic and can be performed with supplies and equipment on a routine aeromedical evacuation mission, AECMs trained in a basic awareness of hazardous aircraft chemicals will result in crews better prepared to cope with the unique risks of transporting patients in a complicated military aircraft.

Identifying chemicals of concern in hydraulic fracturing fluids used for oil production.

PubMed

Stringfellow, William T; Camarillo, Mary Kay; Domen, Jeremy K; Sandelin, Whitney L; Varadharajan, Charuleka; Jordan, Preston D; Reagan, Matthew T; Cooley, Heather; Heberger, Matthew G; Birkholzer, Jens T

2017-01-01

Chemical additives used for hydraulic fracturing and matrix acidizing of oil reservoirs were reviewed and priority chemicals of concern needing further environmental risk assessment, treatment demonstration, or evaluation of occupational hazards were identified. We evaluated chemical additives used for well stimulation in California, the third largest oil producing state in the USA, by the mass and frequency of use, as well as toxicity. The most frequently used chemical additives in oil development were gelling agents, cross-linkers, breakers, clay control agents, iron and scale control agents, corrosion inhibitors, biocides, and various impurities and product stabilizers used as part of commercial mixtures. Hydrochloric and hydrofluoric acids, used for matrix acidizing and other purposes, were reported infrequently. A large number and mass of solvents and surface active agents were used, including quaternary ammonia compounds (QACs) and nonionic surfactants. Acute toxicity was evaluated and many chemicals with low hazard to mammals were identified as potentially hazardous to aquatic environments. Based on an analysis of quantities used, toxicity, and lack of adequate hazard evaluation, QACs, biocides, and corrosion inhibitors were identified as priority chemicals of concern that deserve further investigation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Hazard Management Dealt by Safety Professionals in Colleges: The Impact of Individual Factors.

PubMed

Wu, Tsung-Chih; Chen, Chi-Hsiang; Yi, Nai-Wen; Lu, Pei-Chen; Yu, Shan-Chi; Wang, Chien-Peng

2016-12-03

Identifying, evaluating, and controlling workplace hazards are important functions of safety professionals (SPs). The purpose of this study was to investigate the content and frequency of hazard management dealt by safety professionals in colleges. The authors also explored the effects of organizational factors/individual factors on SPs' perception of frequency of hazard management. The researchers conducted survey research to achieve the objective of this study. The researchers mailed questionnaires to 200 SPs in colleges after simple random sampling, then received a total of 144 valid responses (response rate = 72%). Exploratory factor analysis indicated that the hazard management scale (HMS) extracted five factors, including physical hazards, biological hazards, social and psychological hazards, ergonomic hazards, and chemical hazards. Moreover, the top 10 hazards that the survey results identified that safety professionals were most likely to deal with (in order of most to least frequent) were: organic solvents, illumination, other chemicals, machinery and equipment, fire and explosion, electricity, noise, specific chemicals, human error, and lifting/carrying. Finally, the results of one-way multivariate analysis of variance (MANOVA) indicated there were four individual factors that impacted the perceived frequency of hazard management which were of statistical and practical significance: job tenure in the college of employment, type of certification, gender, and overall job tenure. SPs within colleges and industries can now discuss plans revolving around these five areas instead of having to deal with all of the separate hazards.

Hazard Management Dealt by Safety Professionals in Colleges: The Impact of Individual Factors

PubMed Central

Wu, Tsung-Chih; Chen, Chi-Hsiang; Yi, Nai-Wen; Lu, Pei-Chen; Yu, Shan-Chi; Wang, Chien-Peng

2016-01-01

Identifying, evaluating, and controlling workplace hazards are important functions of safety professionals (SPs). The purpose of this study was to investigate the content and frequency of hazard management dealt by safety professionals in colleges. The authors also explored the effects of organizational factors/individual factors on SPs’ perception of frequency of hazard management. The researchers conducted survey research to achieve the objective of this study. The researchers mailed questionnaires to 200 SPs in colleges after simple random sampling, then received a total of 144 valid responses (response rate = 72%). Exploratory factor analysis indicated that the hazard management scale (HMS) extracted five factors, including physical hazards, biological hazards, social and psychological hazards, ergonomic hazards, and chemical hazards. Moreover, the top 10 hazards that the survey results identified that safety professionals were most likely to deal with (in order of most to least frequent) were: organic solvents, illumination, other chemicals, machinery and equipment, fire and explosion, electricity, noise, specific chemicals, human error, and lifting/carrying. Finally, the results of one-way multivariate analysis of variance (MANOVA) indicated there were four individual factors that impacted the perceived frequency of hazard management which were of statistical and practical significance: job tenure in the college of employment, type of certification, gender, and overall job tenure. SPs within colleges and industries can now discuss plans revolving around these five areas instead of having to deal with all of the separate hazards. PMID:27918474

Use of a modified GreenScreen tool to conduct a screening-level comparative hazard assessment of conventional silver and two forms of nanosilver.

PubMed

Sass, Jennifer; Heine, Lauren; Hwang, Nina

2016-11-08

Increased concern for potential health and environmental impacts of chemicals, including nanomaterials, in consumer products is driving demand for greater transparency regarding potential risks. Chemical hazard assessment is a powerful tool to inform product design, development and procurement and has been integrated into alternative assessment frameworks. The extent to which assessment methods originally designed for conventionally-sized materials can be used for nanomaterials, which have size-dependent physical and chemical properties, have not been well established. We contracted with a certified GreenScreen profiler to conduct three GreenScreen hazard assessments, for conventional silver and two forms of nanosilver. The contractor summarized publicly available literature, and used defined GreenScreen hazard criteria and expert judgment to assign and report hazard classification levels, along with indications of confidence in those assignments. Where data were not available, a data gap (DG) was assigned. Using the individual endpoint scores, an aggregated benchmark score (BM) was applied. Conventional silver and low-soluble nanosilver were assigned the highest possible hazard score and a silica-silver nanocomposite called AGS-20 could not be scored due to data gaps. AGS-20 is approved for use as antimicrobials by the US Environmental Protection Agency. An existing method for chemical hazard assessment and communication can be used - with minor adaptations- to compare hazards across conventional and nano forms of a substance. The differences in data gaps and in hazard profiles support the argument that each silver form should be considered unique and subjected to hazard assessment to inform regulatory decisions and decisions about product design and development. A critical limitation of hazard assessments for nanomaterials is the lack of nano-specific hazard data - where data are available, we demonstrate that existing hazard assessment systems can work. The work is relevant for risk assessors and regulators. We recommend that regulatory agencies and others require more robust data sets on each novel nanomaterial before granting market approval.

Evaluating the environmental hazard of industrial chemicals from data collected during the REACH registration process.

PubMed

Gustavsson, Mikael B; Hellohf, Andreas; Backhaus, Thomas

2017-05-15

Registration dossiers for 11,678 industrial chemicals were retrieved from the database of the European Chemicals Agency, of which 3566 provided a numerical entry for the corresponding predicted no effect concentration for the freshwater environment (PNEC). A distribution-based examination of 2244 of these entries reveals that the average PNEC of an industrial chemical in Europe is 238nmol/L, covering a span of 9 orders of magnitude. A comparison with biocides, pesticides, pharmaceuticals and WFD-priority pollutants reveals that, in average, industrial chemicals are least hazardous (hazard ranking: industrial chemicals≪pharmaceuticals

Cyrano "Nose" The Smell of Success

NASA Technical Reports Server (NTRS)

2001-01-01

Cyrano Sciences, Inc. has commercialized a simple, accurate, non- invasive tool that enables "machines to smell". The Cyranose 320 is used for quality control purposes in the food and chemical industries. Using a sensor array and onboard pattern recognition algorithms, the lightweight, portable device works by exposing an array of polymer composite sensors to the chemical components in a vapor. When the sensors come in contact with the vapor, the polymer expands like a sponge, changing the resistance of the composites. The change in resistance is measured, and from that measurement, the presence of a pre-trained substance is determined with a quick and accurate diagnosis. This real-time, portable device enables food companies to spot test raw materials for batch-to-batch consistency, spoilage, or contamination. The Cyranose 320 is also used by chemical and petrochemical companies for quick assessment of the chemical status associated with various industrial processes. Profiling a chemical environment in a hazardous materials situation allows emergency crews to accurately select fire retardants, containment strategies, and protective gear. Future applications for the Cyranose 320 are fast growing and other uses of this technology are on the horizon.

30 CFR 47.54 - Availability of an MSDS.

Code of Federal Regulations, 2010 CFR

2010-07-01

... make MSDSs accessible to miners during each work shift for each hazardous chemical to which they may be exposed either— (a) At each work area where the hazardous chemical is produced or used, or (b) At an...

Best Practices for NPDES Permit Writers and Pretreatment Coordinators to Address Toxic and Hazardous Chemical Discharges to POTWs

EPA Pesticide Factsheets

This guidance generally describes measures (“best practices”) NPDES permit writers and pretreatment coordinators should consider adopting to address hazardous and toxic chemical discharges to POTWs.

ENGINEERING BULLETIN: CHEMICAL OXIDATION TREATMENT

EPA Science Inventory

Oxidation destroys hazardous contaminants by chemically converting them to nonhazardous or less toxic compounds that are ideally more stable, less mobile, and/or inert. However, under some conditions, other hazardous compounds may be formed. The oxidizing agents most commonly use...

Concept Attainment Teaching Methodology (CATM)--An Effective Approach for Training Workers on Chemicals Health Hazards

ERIC Educational Resources Information Center

Suleiman, Abdulqadir Mohamad

2016-01-01

Workers handling chemicals need to understand the risk to health involved in their work, and this requires training. In this study effectivity of concept attainment teaching methodology (CATM) as training strategy for cleaning workers was assessed. CATM was used to train workers on chemicals information and health hazards. Pictures, illustrations,…

Agricultural Chemical and Pesticide Hazards. Module SH-50. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on agricultural chemical and pesticide hazards is one of 50 modules concerned with job safety and health. This module contains information concerning the safe handling, use, and storage of many chemicals that are frequently used in the control of pests. Following the introduction, 10 objectives (each keyed to a page in the…

Acute Chemical Incidents With Injured First Responders, 2002-2012.

PubMed

Melnikova, Natalia; Wu, Jennifer; Yang, Alice; Orr, Maureen

2018-04-01

IntroductionFirst responders, including firefighters, police officers, emergency medical services, and company emergency response team members, have dangerous jobs that can bring them in contact with hazardous chemicals among other dangers. Limited information is available on responder injuries that occur during hazardous chemical incidents. We analyzed 2002-2012 data on acute chemical incidents with injured responders from 2 Agency for Toxic Substances and Disease Registry chemical incident surveillance programs. To learn more about such injuries, we performed descriptive analysis and looked for trends. The percentage of responders among all injured people in chemical incidents has not changed over the years. Firefighters were the most frequently injured group of responders, followed by police officers. Respiratory system problems were the most often reported injury, and the respiratory irritants, ammonia, methamphetamine-related chemicals, and carbon monoxide were the chemicals more often associated with injuries. Most of the incidents with responder injuries were caused by human error or equipment failure. Firefighters wore personal protective equipment (PPE) most frequently and police officers did so rarely. Police officers' injuries were mostly associated with exposure to ammonia and methamphetamine-related chemicals. Most responders did not receive basic awareness-level hazardous material training. All responders should have at least basic awareness-level hazardous material training to recognize and avoid exposure. Research on improving firefighter PPE should continue. (Disaster Med Public Health Preparedness. 2018;12:211-221).

Nonradiological chemical pathway analysis and identification of chemicals of concern for environmental monitoring at the Hanford Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanton, M.L.; Cooper, A.T.; Castleton, K.J.

1995-11-01

Pacific Northwest`s Surface Environmental Surveillance Project (SESP) is an ongoing effort tot design, review, and conducted monitoring on and off the Hanford site. Chemicals of concern that were selected are listed. Using modeled exposure pathways, the offsite cancer incidence and hazard quotient were calculated and a retrospective pathway analysis performed to estimate what onsite concentrations would be required in the soil for each chemical of concern and other detected chemicals that would be required to obtain an estimated offsite human-health risk of 1.0E-06 cancer incidence or 1.0 hazard quotient. This analysis indicates that current nonradiological chemical contamination occurring on themore » site does not pose a significant offsite human-health risk; the highest cancer incidence to the offsite maximally exposed individual was from arsenic (1.76E-10); the highest hazard quotient was chromium(VI) (1.48E-04). The most sensitive pathways of exposure were surfacewater and aquatic food consumption. Combined total offsite excess cancer incidence was 2.09E-10 and estimated hazard quotient was 2.40E-04. Of the 17 identified chemicals of concern, the SESP does not currently (routinely) monitor arsenic, benzo(a)pyrene, bis(2- ethylhexyl)phthalate (BEHP), and chrysene. Only 3 of the chemicals of concern (arsenic, BEHP, chloroform) could actually occur in onsite soil at concern high enough to cause a 1.0E-06 excess cancer incidence or a 1.0 hazard index for a given offsite exposure pathway. During the retrospective analysis, 20 other chemicals were also evaluated; only vinyl chloride and thallium could reach targeted offsite risk values.« less

Two Springfield, Mass. Facilities Agree to Improve Handling and Reporting of Hazardous Chemicals

EPA Pesticide Factsheets

Two facilities located in Springfield, Mass. have agreed with the U.S. EPA to come into compliance with federal requirements designed to protect the public and first responders from exposure to hazardous chemicals.

Topical Backgrounder: Evaluating Chemical Hazards in the Community: Using RMP's Offsite Consequence Analysis

EPA Pesticide Factsheets

Part of a May 1999 series on the Risk Management Program Rule and issues related to chemical emergency management. Explains hazard versus risk, worst-case and alternative release scenarios, flammable endpoints and toxic endpoints.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thrall, K.D.

The purpose of this project was to demonstrate the ``Exposure-to- Risk`` monitoring system in an actual occupational environment. The system is a unique combination of existing hardware with proprietary software to create an integrated means of assessing occupational exposures to volatile organic compounds. One component of this system utilizes a portable mass spectrometer developed by Teledyne Electronic Technologies. Integration of the system was accomplished under Laboratory Directed Research and Development (LDRD) funding. Commercialization of the system will take place following demonstration in an actual occupational environment, and will include, in part, Teledyne Electronic Technologies. The Exposure-to-Risk monitoring system will benefitmore » DOE by overcoming present-day limitations in worker health protection monitoring. There are numerous sites within the` DOE complex where many different hazardous chemicals are used on a routine basis. These chemicals range from paint stripers and cleaning solvents to chemical warfare agents, each having its own degree of potential adverse health risk to a worker. Thus, a real concern for DOE is to ensure that a worker is properly monitored to assess any adverse health risk from exposure to potentially hazardous chemicals. With current industrial hygiene technologies, this is an arduous task. The Exposure-to-Risk monitoring system integrates a patented breath-inlet device connecting a subject`s exhaled breath directly with a field-portable mass spectrometer with physiologically based pharmacokinetic (PBPK) modeling to estimate the target tissue dose following a chemical exposure. Estimation of the adverse health risk prediction follows from the exposure/dose calculation based on currently accepted methodologies. This new system can determine, in the field, the possible adverse health risks on a daily basis to an individual worker.« less

Sceening, down selection, and implementation of environmentally compliant cleaning and insulation bonding for MNASA

NASA Astrophysics Data System (ADS)

Keen, Jill M.; Hutchens, D. E.; Smith, G. M.; Dillard, T. W.

1994-06-01

MNASA, a quarter-scale space shuttle solid rocket motor, has historically been processed using environmentally and physiologically harmful chemicals. This program draws from previous testing done in support of full-scale manufacturing and examines the synergy and interdependency between environmentally acceptable materials for Solid Rocket Motor insulation applications, bonding, corrosion inhibiting, painting, priming and cleaning; and then implements new materials and processes in sub-scale motors. Tests have been conducted to eliminate or minimize hazardous chemicals used in the manufacture of MNASA components and identify alternate materials and/or processes following NASA Operational Environment Team (NOET) priorities. This presentation describes implementation of high pressure water refurbishment cleaning, aqueous precision cleaning using both Brulin 815 GD and Jettacin and insulation case bonding using ODC compliant primers and adhesives.

Elucidating Adverse Nutritional Implications of Exposure to Endocrine-Disrupting Chemicals and Mycotoxins through Stable Isotope Techniques.

PubMed

Owino, Victor O; Cornelius, Carolin; Loechl, Cornelia U

2018-03-23

Multiple drivers of the double burden of malnutrition (DBM) include a rapid shift from predominantly plant-based diets to energy-dense foods based on meats, milk, animal fats and vegetable oils. The shift to overweight and obesity is driven by increased exposure to mass media, urbanization, technological advances in food processing, rising income and increased population density associated with increased access to cheap foods. At the same time, undernutrition persists mainly due to food insecurity and lack of access to safe water, sanitation and adequate health care. All known nutrition interventions result in only one third reduction in stunting. Little consideration has been given to hazardous exposure to endocrine disrupting chemicals (EDCs) and microbial toxins as major components of the malnutrition-causal framework. These hazards include microbial toxins, for example, mycotoxins, and environmental pollutants such as persistent organic pollutants (POPs), some of which are known to disrupt the endocrine system. These hazards sit at the cross road of undernutrition and overweight and obesity since the exposure cuts across the critical window of opportunity (the first 1000 days). In this review, we update on the role of food and environmental contaminants, especially EDCs and aflatoxins, in child growth and on the implications for metabolic dysfunction and disease risk in later life, and discuss potential applications of nuclear and isotopic techniques to elucidate the underlying biological mechanisms, outcome indicators, as well as occurrence levels.

FDA-iRISK--a comparative risk assessment system for evaluating and ranking food-hazard pairs: case studies on microbial hazards.

PubMed

Chen, Yuhuan; Dennis, Sherri B; Hartnett, Emma; Paoli, Greg; Pouillot, Régis; Ruthman, Todd; Wilson, Margaret

2013-03-01

Stakeholders in the system of food safety, in particular federal agencies, need evidence-based, transparent, and rigorous approaches to estimate and compare the risk of foodborne illness from microbial and chemical hazards and the public health impact of interventions. FDA-iRISK (referred to here as iRISK), a Web-based quantitative risk assessment system, was developed to meet this need. The modeling tool enables users to assess, compare, and rank the risks posed by multiple food-hazard pairs at all stages of the food supply system, from primary production, through manufacturing and processing, to retail distribution and, ultimately, to the consumer. Using standard data entry templates, built-in mathematical functions, and Monte Carlo simulation techniques, iRISK integrates data and assumptions from seven components: the food, the hazard, the population of consumers, process models describing the introduction and fate of the hazard up to the point of consumption, consumption patterns, dose-response curves, and health effects. Beyond risk ranking, iRISK enables users to estimate and compare the impact of interventions and control measures on public health risk. iRISK provides estimates of the impact of proposed interventions in various ways, including changes in the mean risk of illness and burden of disease metrics, such as losses in disability-adjusted life years. Case studies for Listeria monocytogenes and Salmonella were developed to demonstrate the application of iRISK for the estimation of risks and the impact of interventions for microbial hazards. iRISK was made available to the public at http://irisk.foodrisk.org in October 2012.

Notification: Preliminary Research on the U.S. Chemical Safety and Hazard Investigation Board's Management of Contracts

EPA Pesticide Factsheets

June 3, 2013. The U.S. Environmental Protection Agency’s Office of Inspector General plans to begin preliminary research on the U.S. Chemical Safety and Hazard Investigation Board’s management of contracts.

High Throughput Pharmacokinetics for Environmental Chemicals (FutureToxII)

EPA Science Inventory

Pharmacokinetic (PK) models are critical to determine whether chemical exposures produce potentially hazardous tissue concentrations. For bioactivity identified in vitro (e.g. ToxCast) – hazardous or not – PK models can forecast exposure thresholds, below which no significant bio...

LINERS FOR SANITARY LANDFILLS AND CHEMICAL AND HAZARDOUS WASTE DISPOSAL SITES

EPA Science Inventory

This report lists addresses of sanitary landfills and chemical and hazardous waste disposal sites and holding ponds with some form of impermeable lining. Liners included are polyethylene, polyvinyl chloride, Hypalon R, ethylene propylene diene monomer, butyl rubber, conventional ...

40 CFR 370.12 - What hazardous chemicals must I report under this part?

Code of Federal Regulations, 2011 CFR

2011-07-01

... under OSHA HCS that is present at your facility equal to or above the applicable threshold specified in... required to have an MSDS and meets the definition of hazardous chemical under the OSHA regulations found at...

EPA'S TOXCAST PROGRAM FOR PREDICTING HAZARD AND PRIORITIZING TOXICITY TESTING OF ENVIRONMENTAL CHEMICALS

EPA Science Inventory

EPA is developing methods for utilizing computational chemistry, high-throughput screening (HTS) and various toxicogenomic technologies to predict potential for toxicity and prioritize limited testing resources towards chemicals that likely represent the greatest hazard to human ...

40 CFR 370.12 - What hazardous chemicals must I report under this part?

Code of Federal Regulations, 2010 CFR

2010-07-01

... under OSHA HCS that is present at your facility equal to or above the applicable threshold specified in... required to have an MSDS and meets the definition of hazardous chemical under the OSHA regulations found at...

Hazard Communication Standard for Chemical Labels and Safety Data Sheets In GHS Format

EPA Pesticide Factsheets

This fact sheet provides an overview of the required contents of Safety Data Sheets (SDSs) and chemical hazard labels, and includes tips on how these materials can be used to better protect health and the environment.

An Annotated Bibliography of the Literature Dealing With the Hazardous Chemicals Used in the Chemistry Laboratory.

ERIC Educational Resources Information Center

Chaney, Donna J.

On the premise that many laboratory instructors lack knowledge about chemical toxicity, this study investigated three areas: (1) chemicals used in the academic laboratory which pose a health hazard; (2) ways of reducing toxicity in the laboratory (with attention to the apparent lack of teacher training which contributes to the cause of the problem…

Options for the destruction of chemical weapons and management of the associated risks.

PubMed

Manley, Ron G

2006-09-01

The destruction of chemical weapons is a hazardous operation. The degree of hazard posed, however, is not uniform and is dependent on the specific chemical agent and the configuration of the weapon or bulk storage vessel in which it is contained. For example, a highly volatile nerve agent in an explosively configured munition, such as a rocket, poses a very different hazard from that of a bulk storage container of viscous mustard gas. Equally the handling of recovered, often highly corroded, World War (WW)I or WWII chemical munitions will pose a very different hazard from that associated with dealing with modern chemical weapons stored under the appropriate conditions. Over the years, a number of technologies have been developed for the destruction of chemical weapons. Each has its advantages and disadvantages. None of them provide a universal solution to the problem. When assessing options for the destruction of these weapons and the management of the associated risks, therefore, it is important to give due consideration and weight to these differences. To ensure that the destruction technology selected takes due account of them and that the resulting overall risk assessment accurately reflects the actual risks involved.

Assessment and management of chemical exposure in the Mohs laboratory.

PubMed

Gunson, Todd H; Smith, Harvey R; Vinciullo, Carl

2011-01-01

The correct handling, storage, and disposal of chemicals used in the processing of tissue for Mohs micrographic surgery are essential. To identify the chemicals involved in the preparation of Mohs frozen sections and assess the associated occupational health risks. To quantify exposure levels of hazardous chemicals and ensure that they are minimized. A risk assessment form was completed for each chemical. Atmospheric sampling was performed at our previous laboratory for formaldehyde and volatile organic compounds. These data were used in the design of our new facility, where testing was repeated. Twenty-five chemicals were identified. Ten were classified as hazardous substances, 10 were flammable, six had specific disposal requirements, four were potential carcinogens, and three were potential teratogens. Formaldehyde readings at our previous laboratory were up to eight times the national exposure standard. Testing at the new laboratory produced levels well below the exposure standards. Chemical exposure within the Mohs laboratory can present a significant occupational hazard. Acutely toxic and potentially carcinogenic formaldehyde was found at high levels in a relatively standard laboratory configuration. A laboratory can be designed with a combination of physical environment and operational protocols that minimizes hazards and creates a safe working environment. © 2010 by the American Society for Dermatologic Surgery, Inc.

[Noise hazard and hearing loss in workers in automotive component manufacturing industry in Guangzhou, China].

PubMed

Wang, Zhi; Liang, Jiabin; Rong, Xing; Zhou, Hao; Duan, Chuanwei; Du, Weijia; Liu, Yimin

2015-12-01

To investigate noise hazard and its influence on hearing loss in workers in the automotive component manufacturing industry. Noise level in the workplace of automotive component manufacturing enterprises was measured and hearing examination was performed for workers to analyze the features and exposure levels of noise in each process, as well as the influence on hearing loss in workers. In the manufacturing processes for different products in this industry, the manufacturing processes of automobile hub and suspension and steering systems had the highest degrees of noise hazard, with over-standard rates of 79.8% and 57.1%, respectively. In the different technical processes for automotive component manufacturing, punching and casting had the highest degrees of noise hazard, with over-standard rates of 65.0% and 50%, respectively. The workers engaged in the automotive air conditioning system had the highest rate of abnormal hearing ability (up to 3.1%). In the automotive component manufacturing industry, noise hazard exceeds the standard seriously. Although the rate of abnormal hearing is lower than the average value of the automobile manufacturing industry in China, this rate tends to increase gradually. Enough emphasis should be placed on the noise hazard in this industry.

PubMed

Di Mare, Valerio; Garramone, Gaetano; Rubbiani, Maristella; Moretto, Angelo

2017-02-15

Hazard classification of chemicals can be defined as a logic-mathematical operation aimed at identifying the type and severity of the inherent hazards of a substance or a mixture. The purpose of this study was to evaluate, in 134 safety data sheets (SDSs): i) the hazard classification and ii) its coherence with sections 9 (physical-chemical properties), 11 (toxicological properties) and 12 (ecological properties) of the SDSs. Hazard classification and the information provided in sections 9, 11 and 12 of the SDSs have been evaluated against the criteria provided in annexes VI of the Dangerous Substance Directive, II and III of the Dangerous Preparations Directive, I and VI of the Regulation (EC) n. 1272/2008. Most of the analyzed SDSs of substances (62%) was associated to non-classified chemicals (61.4%), although 19.6% of them should have been classified. By contrast, 59.4% of classified substances (representing 38.6% of analyzed ones) were wrongly classified. Fifty-four %, 54% and 67% of suggested substances hazard classification were in line with sections 9 (physical-chemical properties), 11 (toxicological properties) and 12 (ecological properties). The proportion of hazard classification mistakes in SDS was significant, suggesting the need of more qualified experts to derive classification. The introduction of an ad hoc evaluation team, managed by a single, qualified specialist, could represent a solution to ensure the needed improvement of SDSs quality.

Considerations for the design and technical setup of a human whole-body exposure chamber.

PubMed

Monsé, Christian; Sucker, Kirsten; van Thriel, Christoph; Broding, Horst Christoph; Jettkant, Birger; Berresheim, Hans; Wiethege, Thorsten; Käfferlein, Heiko; Merget, Rolf; Bünger, Jürgen; Brüning, Thomas

2012-01-01

Exposures to air contaminants, such as chemical vapors and particulate matter, pose important health hazards at workplaces. Short-term experimental exposures to chemical vapors and particles in humans are a promising attempt to investigate acute effects of such hazards. However, a significant challenge in this field is the determination of effects of co-exposures to more than one chemical or mixtures of chemical vapors and/or particles. To overcome such a challenge, studies have to be conducted under standardized exposure characterization and real time measurements, if possible. A new exposure laboratory (ExpoLab) was installed at IPA, combining sophisticated engineering designs with new analytical techniques, to fulfill these requirements. Low-dose as well as high-dose exposure scenarios are achieved by means of a calibration-gas-generator. Exposure monitoring can be carried out with a high performance real time mass spectrometer and other suitable analyzers (e.g. gas chromatograph). Numerous automated security facilities guarantee the physical integrity of the volunteers, and the waste atmosphere is removed using either charcoal filtration or catalytic post-combustion. Measurements of sulfur hexafluoride, carbon dioxide, aniline and carbon black are presented to demonstrate the performance of the exposure unit with respect to the temporal and spatial stability of generated atmospheres. The variations of generated contents in the atmospheres at steady state are slightly higher than the measurement precision of the analyzers (the typical standard deviation of generated atmospheres is < 2%). The technical components of ExpoLab and its monitoring systems ensure high quality standards in validity and reliability of generating and measuring exposure atmospheres.

Hazardous Waste

MedlinePlus

... use them properly, many chemicals can still harm human health and the environment. When you throw these substances away, they become hazardous waste. Some hazardous wastes come from products in our ...

Fire Hazard Assessment in Supporting Fire Protection System Design of a Chemical Process Facility

DTIC Science & Technology

1996-08-01

CSDP/Studies/FireHaz –i– 3/28/97 FIRE HAZARD ASSESSMENT IN SUPPORTING FIRE PROTECTION SYSTEM DESIGN OF A CHEMICAL PROCESS FACILITY Ali Pezeshk...Joseph Chang, Dwight Hunt, and Peter Jahn Parsons Infrastructure & Technology Group, Inc. Pasadena, California 91124 ABSTRACT Because fires in a chemical ...Assessment in Supporting Fire Protection System Design of a Chemical Process Facility 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

Qualification Standards for Personnel Responsible for Hazardous or Noxious Chemicals in Bulk. Volume I.

DTIC Science & Technology

1976-05-01

relate to qualifications and training of chemical handling personnel aboard tank - ships and tank barges for two cargo containment systems (i.e., ambient...Transportation b)j •Water; Human Factors; Functional Job ‘Analysis; Tank Ship; Tank Barge; Chemical Tankerman, Educational Cur- .riculum~ Personnel...for safe handling of hazard- ous chemicals transported In bulk by tankshlps and tank barges. One of the resul ts of this study is a data bank of tasks

Chemical Hygiene and Safety Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berkner, K.

The objective of this Chemical Hygiene and Safety Plan (CHSP) is to provide specific guidance to all LBL employees and contractors who use hazardous chemicals. This Plan, when implemented, fulfills the requirements of both the Federal OSHA Laboratory Standard (29 CFR 1910.1450) for laboratory workers, and the Federal OSHA Hazard Communication Standard (29 CFR 1910.1200) for non-laboratory operations (e.g., shops). It sets forth safety procedures and describes how LBL employees are informed about the potential chemical hazards in their work areas so they can avoid harmful exposures and safeguard their health. Generally, communication of this Plan will occur through trainingmore » and the Plan will serve as a the framework and reference guide for that training.« less

Guide for Oxygen Hazards Analyses on Components and Systems

NASA Technical Reports Server (NTRS)

Stoltzfus, Joel M.; Dees, Jesse; Poe, Robert F.

1996-01-01

Because most materials, including metals, will burn in an oxygen-enriched environment, hazards are always present when using oxygen. Most materials will ignite at lower temperatures in an oxygen-enriched environment than in air, and once ignited, combustion rates are greater in the oxygen-enriched environment. Many metals burn violently in an oxygen-enriched environment when ignited. Lubricants, tapes, gaskets, fuels, and solvents can increase the possibility of ignition in oxygen systems. However, these hazards do not preclude the use of oxygen. Oxygen may be safely used if all the materials in a system are not flammable in the end-use environment or if ignition sources are identified and controlled. These ignition and combustion hazards necessitate a proper oxygen hazards analysis before introducing a material or component into oxygen service. The objective of this test plan is to describe the White Sands Test Facility oxygen hazards analysis to be performed on components and systems before oxygen is introduced and is recommended before implementing the oxygen component qualification procedure. The plan describes the NASA Johnson Space Center White Sands Test Facility method consistent with the ASTM documents for analyzing the hazards of components and systems exposed to an oxygen-enriched environment. The oxygen hazards analysis is a useful tool for oxygen-system designers, system engineers, and facility managers. Problem areas can be pinpointed before oxygen is introduced into the system, preventing damage to hardware and possible injury or loss of life.

Apparatus and method for extraction of chemicals from aquifer remediation effluent water

DOEpatents

McMurtrey, Ryan D.; Ginosar, Daniel M.; Moor, Kenneth S.; Shook, G. Michael; Moses, John M.; Barker, Donna L.

2002-01-01

An apparatus and method for extraction of chemicals from an aquifer remediation aqueous effluent are provided. The extraction method utilizes a critical fluid for separation and recovery of chemicals employed in remediating aquifers contaminated with hazardous organic substances, and is particularly suited for separation and recovery of organic contaminants and process chemicals used in surfactant-based remediation technologies. The extraction method separates and recovers high-value chemicals from the remediation effluent and minimizes the volume of generated hazardous waste. The recovered chemicals can be recycled to the remediation process or stored for later use.

Method and system for extraction of chemicals from aquifer remediation effluent water

DOEpatents

McMurtrey, Ryan D.; Ginosar, Daniel M.; Moor, Kenneth S.; Shook, G. Michael; Barker, Donna L.

2003-01-01

A method and system for extraction of chemicals from an groundwater remediation aqueous effluent are provided. The extraction method utilizes a critical fluid for separation and recovery of chemicals employed in remediating groundwater contaminated with hazardous organic substances, and is particularly suited for separation and recovery of organic contaminants and process chemicals used in surfactant-based remediation technologies. The extraction method separates and recovers high-value chemicals from the remediation effluent and minimizes the volume of generated hazardous waste. The recovered chemicals can be recycled to the remediation process or stored for later use.

Notification: FY 2012 Management Challenges and Internal Control Weaknesses for the Chemical Safety and Hazard Investigation Board

EPA Pesticide Factsheets

February 1, 2012. The EPA Office of Inspector General is beginning work to update our list of areas we consider to be the key management challenges confronting the Chemical Safety and Hazard Investigation Board.

Obey the Rules Governing Chemical Hazards in Schools.

ERIC Educational Resources Information Center

Christiansen, Carl L.

1988-01-01

Describes how the largest school district in Utah complied with the regulations for school safety--the Occupational Safety and Health Administration expanded chemical hazard communication standard and the Environmental Protection Agency Emergency Planning and Community Right-to-Know Act of 1986. (MLF)

Notification: Key Management Challenges Confronting the U.S. Chemical Safety and Hazard Investigation Board

EPA Pesticide Factsheets

June 9, 2014. The OIG is beginning work to update the fiscal year 2014 list of areas we consider to be the key management challenges confronting the U.S. Chemical Safety and Hazard Investigation Board (CSB).

TREATABILITY POTENTIAL FOR EPA LISTED HAZARDOUS WASTES IN SOIL

EPA Science Inventory

This study developed comprehensive screening data on the treatability in soil of: (a) specific listed hazardous organic chemicals, and (b) waste sludge from explosives production (K044) and related chemicals. Laboratory experiments were conducted using two soil types, an acidic s...

Report: U.S. Chemical Safety and Hazard Investigation Board Needs to Complete More Timely Investigations

EPA Pesticide Factsheets

Report #13-P-0337, July 30, 2013. CSB does not have an effective management system to meet its established performance goal to “conduct incident investigations and safety studies concerning releases of hazardous chemical substances.”

16 CFR 1500.231 - Guidance for hazardous liquid chemicals in children's products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... hazardous chemicals, such as mercury, ethylene glycol, diethylene glycol, methanol, methylene chloride... purchasing products for resale, importers, distributors, and retailers obtain assurances from manufacturers... retailers obtain assurances from the manufacturers that liquid-filled children's products do not contain...

Chemistry laboratory safety manual available

NASA Technical Reports Server (NTRS)

Elsbrock, R. G.

1968-01-01

Chemistry laboratory safety manual outlines safe practices for handling hazardous chemicals and chemistry laboratory equipment. Included are discussions of chemical hazards relating to fire, health, explosion, safety equipment and procedures for certain laboratory techniques and manipulations involving glassware, vacuum equipment, acids, bases, and volatile solvents.

40 CFR 1601.23 - Appeals of denials.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 1601.23 Protection of Environment CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD PROCEDURES FOR... requester may appeal the denial to: FOIA Appeals Officer, United States Chemical Safety and Hazard..., the request will be processed promptly in accordance with the decision on appeal. (d) Judicial review...

40 CFR 1601.23 - Appeals of denials.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 1601.23 Protection of Environment CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD PROCEDURES FOR... requester may appeal the denial to: FOIA Appeals Officer, United States Chemical Safety and Hazard..., the request will be processed promptly in accordance with the decision on appeal. (d) Judicial review...

40 CFR 1601.23 - Appeals of denials.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 1601.23 Protection of Environment CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD PROCEDURES FOR... requester may appeal the denial to: FOIA Appeals Officer, United States Chemical Safety and Hazard..., the request will be processed promptly in accordance with the decision on appeal. (d) Judicial review...

Pulmonary adverse effects of welding fume in automobile assembly welders.

PubMed

Sharifian, Seyed Akbar; Loukzadeh, Ziba; Shojaoddiny-Ardekani, Ahmad; Aminian, Omid

2011-01-01

Welding is one of the key components of numerous manufacturing industries, which has potential physical and chemical health hazards. Many components of welding fumes can potentially affect the lung function. This study investigates the effects of welding fumes on lung function and respiratory symptoms among welders of an automobile manufacturing plant in Iran. This historical cohort study assesses 43 male welders and 129 office workers by a questionnaire to record demographic data, smoking habits, work history and respiratory symptoms as well as lung function status by spirometry. The average pulmonary function values of welders were lower relative to controls with dose-effect relationship between work duration and pulmonary function impairment. The prevalence of chronic bronchitis was higher in welders than controls. Our findings suggest that welders are at risk for pulmonary disease.

Evidence-based support for the all-hazards approach to emergency preparedness

PubMed Central

2012-01-01

Background During the last decade there has been a need to respond and recover from various types of emergencies including mass casualty events (MCEs), mass toxicological/chemical events (MTEs), and biological events (pandemics and bio-terror agents). Effective emergency preparedness is more likely to be achieved if an all-hazards response plan is adopted. Objectives To investigate if there is a relationship among hospitals' preparedness for various emergency scenarios, and whether components of one emergency scenario correlate with preparedness for other emergency scenarios. Methods Emergency preparedness levels of all acute-care hospitals for MCEs, MTEs, and biological events were evaluated, utilizing a structured evaluation tool based on measurable parameters. Evaluations were made by professional experts in two phases: evaluation of standard operating procedures (SOPs) followed by a site visit. Relationships among total preparedness and different components' scores for various types of emergencies were analyzed. Results Significant relationships were found among preparedness for different emergencies. Standard Operating Procedures (SOPs) for biological events correlated with preparedness for all investigated emergency scenarios. Strong correlations were found between training and drills with preparedness for all investigated emergency scenarios. Conclusions Fundamental critical building blocks such as SOPs, training, and drill programs improve preparedness for different emergencies including MCEs, MTEs, and biological events, more than other building blocks, such as equipment or knowledge of personnel. SOPs are especially important in unfamiliar emergency scenarios. The findings support the adoption of an all-hazards approach to emergency preparedness. PMID:23098065

Use of short-term test systems for the prediction of the hazard represented by potential chemical carcinogens

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glass, L.R.; Jones, T.D.; Easterly, C.E.

1990-10-01

It has been hypothesized that results from short-term bioassays will ultimately provide information that will be useful for human health hazard assessment. Historically, the validity of the short-term tests has been assessed using the framework of the epidemiologic/medical screens. In this context, the results of the carcinogen (long-term) bioassay is generally used as the standard. However, this approach is widely recognized as being biased and, because it employs qualitative data, cannot be used to assist in isolating those compounds which may represent a more significant toxicologic hazard than others. In contrast, the goal of this research is to address themore » problem of evaluating the utility of the short-term tests for hazard assessment using an alternative method of investigation. Chemicals were selected mostly from the list of carcinogens published by the International Agency for Research on Carcinogens (IARC); a few other chemicals commonly recognized as hazardous were included. Tumorigenicity and mutagenicity data on 52 chemicals were obtained from the Registry of Toxic Effects of Chemical Substances (RTECS) and were analyzed using a relative potency approach. The data were evaluated in a format which allowed for a comparison of the ranking of the mutagenic relative potencies of the compounds (as estimated using short-term data) vs. the ranking of the tumorigenic relative potencies (as estimated from the chronic bioassays). Although this was a preliminary investigation, it offers evidence that the short-term tests systems may be of utility in ranking the hazards represented by chemicals which may contribute to increased carcinogenesis in humans as a result of occupational or environmental exposures. 177 refs., 8 tabs.« less

76 FR 56362 - National Oil and Hazardous Substances Pollution Contingency Plan National Priorities List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-13

... and Hazardous Substances Pollution Contingency Plan National Priorities List AGENCY: Environmental... protection, Air pollution control, Chemicals, Hazardous Waste, Hazardous substances, Intergovernmental relations, Penalties, Reporting and recordkeeping requirements, Superfund, Water pollution control, Water...

76 FR 42055 - National Oil and Hazardous Substances Pollution Contingency Plan; National Priorities List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-18

... protection, Air pollution control, Chemicals, Hazardous Waste, Hazardous substances, Intergovernmental relations, Penalties, Reporting and recordkeeping requirements, Superfund, Water pollution control, Water... and Hazardous Substances Pollution Contingency Plan; National Priorities List AGENCY: Environmental...

Acute and chronic environmental effects of clandestine methamphetamine waste.

PubMed

Kates, Lisa N; Knapp, Charles W; Keenan, Helen E

2014-09-15

The illicit manufacture of methamphetamine (MAP) produces substantial amounts of hazardous waste that is dumped illegally. This study presents the first environmental evaluation of waste produced from illicit MAP manufacture. Chemical oxygen demand (COD) was measured to assess immediate oxygen depletion effects. A mixture of five waste components (10mg/L/chemical) was found to have a COD (130 mg/L) higher than the European Union wastewater discharge regulations (125 mg/L). Two environmental partition coefficients, K(OW) and K(OC), were measured for several chemicals identified in MAP waste. Experimental values were input into a computer fugacity model (EPI Suite™) to estimate environmental fate. Experimental log K(OW) values ranged from -0.98 to 4.91, which were in accordance with computer estimated values. Experimental K(OC) values ranged from 11 to 72, which were much lower than the default computer values. The experimental fugacity model for discharge to water estimates that waste components will remain in the water compartment for 15 to 37 days. Using a combination of laboratory experimentation and computer modelling, the environmental fate of MAP waste products was estimated. While fugacity models using experimental and computational values were very similar, default computer models should not take the place of laboratory experimentation. Copyright © 2014 Elsevier B.V. All rights reserved.

Discrete mathematical data analysis approach: a valuable assessment method for sustainable chemistry.

PubMed

Voigt, Kristina; Scherb, Hagen; Bruggemann, Rainer; Schramm, Karl-Werner

2013-06-01

Sustainable/Green Chemistry is a chemical philosophy encouraging the design of products and processes that reduce or eliminate the use and generation of hazardous substances. In this respect, metrical scientific disciplines like Chemometrics are important, because they indicate criteria for chemicals being hazardous or not. We demonstrated that sustainable principles in the disciplines Green Chemistry, Green Engineering, and Sustainability in Information Technology have main aspects in common. The use of non-hazardous chemicals or the more efficient use of chemical substances is one of these aspects. We take a closer look on the topic of the hazards of chemical substances. Our research focuses on data analyses concerning environmental chemicals named Persistent Organic Pollutants (POPs), which are found all over the world and pose a large risk to environment as well as to humans. The evaluation of the data is a major step in the elucidation of the danger of these chemicals. The data analysis method demonstrated here, is based on the theory of partially ordered sets and provides a generalized ranking. In our approach we investigate data sets of breast milk samples of women in Denmark, Finland, and Turkey which contained measurable levels of 20 POPs. The goal is twofold: On the one side the hazardous chemicals are to be identified and on the other side possible differences among the three nations should be detected, because in that case possible different uptake mechanisms may be supposed. The data analysis is performed by the free available software package PyHasse, written by the third author. We conclude that the data analysis method can well be applied for distinguishing between more or less dangerous existing chemicals. Furthermore, it should be used in sustainable chemistry in the same manner for detecting more and less sustainable chemicals. Copyright © 2013 Elsevier B.V. All rights reserved.

Effective removal of hazardous trace metals from recovery boiler fly ashes.

PubMed

Kinnarinen, Teemu; Golmaei, Mohammad; Jernström, Eeva; Häkkinen, Antti

2018-02-15

The objective of this study is to introduce a treatment sequence enabling straightforward and effective recovery of hazardous trace elements from recovery boiler fly ash (RBFA) by a novel method, and to demonstrate the subsequent removal of Cl and K with the existing crystallization technology. The treatment sequence comprises two stages: dissolution of most other RBFA components than the hazardous trace elements in water in Step 1 of the treatment, and crystallization of the process chemicals in Step 2. Solid-liquid separation has an important role in the treatment, due to the need to separate first the small solid residue containing the trace elements, and to separate the valuable crystals, containing Na and S, from the liquid rich in Cl and K. According to the results, nearly complete recovery of cadmium, lead and zinc can be reached even without pH adjustment. Some other metals, such as Mg and Mn, are removed together with the hazardous metals. Regarding the removal of Cl and K from the process, in this non-optimized case the removal efficiency was satisfactory: 60-70% for K when 80% of sodium was recovered, and close to 70% for Cl when 80% of sulfate was recovered. Copyright © 2017 Elsevier B.V. All rights reserved.

Guide for Oxygen Component Qualification Tests

NASA Technical Reports Server (NTRS)

Bamford, Larry J.; Rucker, Michelle A.; Dobbin, Douglas

1996-01-01

Although oxygen is a chemically stable element, it is not shock sensitive, will not decompose, and is not flammable. Oxygen use therefore carries a risk that should never be overlooked, because oxygen is a strong oxidizer that vigorously supports combustion. Safety is of primary concern in oxygen service. To promote safety in oxygen systems, the flammability of materials used in them should be analyzed. At the NASA White Sands Test Facility (WSTF), we have performed configurational tests of components specifically engineered for oxygen service. These tests follow a detailed WSTF oxygen hazards analysis. The stated objective of the tests was to provide performance test data for customer use as part of a qualification plan for a particular component in a particular configuration, and under worst-case conditions. In this document - the 'Guide for Oxygen Component Qualification Tests' - we outline recommended test systems, and cleaning, handling, and test procedures that address worst-case conditions. It should be noted that test results apply specifically to: manual valves, remotely operated valves, check valves, relief valves, filters, regulators, flexible hoses, and intensifiers. Component systems are not covered.

Approaches to systematic assessment of environmental exposures posed at hazardous waste sites in the developing world: the Toxic Sites Identification Program.

PubMed

Ericson, Bret; Caravanos, Jack; Chatham-Stephens, Kevin; Landrigan, Philip; Fuller, Richard

2013-02-01

In the developing world, environmental chemical exposures due to hazardous waste sites are poorly documented. We describe the approach taken by the Blacksmith Institute's Toxic Sites Identification Program in documenting environmental chemical exposures due to hazardous waste sites globally, identifying sites of concern and quantifying pathways, populations, and severity of exposure. A network of local environmental investigators was identified and trained to conduct hazardous waste site investigations and assessments. To date, 2,095 contaminated sites have been identified within 47 countries having an estimated population at risk of 71,500,000. Trained researchers and investigators have visited 1,400 of those sites. Heavy metals are the leading primary exposures, with water supply and ambient air being the primary routes of exposure. Even though chemical production has occurred largely in the developed world to date, many hazardous waste sites in the developing world pose significant hazards to the health of large portions of the population. Further research is needed to quantify potential health and economic consequences and identify cost-effective approaches to remediation.

Instructions for the Tier I Emergency and Hazardous Chemical Inventory Form

EPA Pesticide Factsheets

The purpose of the Emergency Planning and Community Right-to-Know Act Tier I form is to provide State and local officials and the public with information on the general chemical hazard types and locations at your facility, if above reporting thresholds.

FIELD SCREENING METHODS FOR HAZARDOUS WASTES AND TOXIC CHEMICALS

EPA Science Inventory

The purpose of this document is to present the technical papers that were presented at the Second International Symposium on Field Screening Methods for Hazardous Wastes and Toxic Chemicals. ixty platform presentations were made and included in one of ten sessions: hemical sensor...

40 CFR 63.101 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry § 63.101... 71. Organic hazardous air pollutant or organic HAP means one of the chemicals listed in table 2 of... or more organic reactants to produce one or more organic compounds. Air oxidation reactor includes...

40 CFR 63.101 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry § 63.101... 71. Organic hazardous air pollutant or organic HAP means one of the chemicals listed in table 2 of... or more organic reactants to produce one or more organic compounds. Air oxidation reactor includes...

40 CFR 63.101 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry § 63.101... 71. Organic hazardous air pollutant or organic HAP means one of the chemicals listed in table 2 of... or more organic reactants to produce one or more organic compounds. Air oxidation reactor includes...

40 CFR 370.13 - What substances are exempt from these reporting requirements?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) SUPERFUND, EMERGENCY PLANNING, AND COMMUNITY RIGHT-TO-KNOW PROGRAMS HAZARDOUS CHEMICAL REPORTING... OSHA regulations, or that are excluded from the definition of hazardous chemical under EPCRA section... a fertilizer held for sale by a retailer to the ultimate customer. ...

40 CFR 370.13 - What substances are exempt from these reporting requirements?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) SUPERFUND, EMERGENCY PLANNING, AND COMMUNITY RIGHT-TO-KNOW PROGRAMS HAZARDOUS CHEMICAL REPORTING... OSHA regulations, or that are excluded from the definition of hazardous chemical under EPCRA section... a fertilizer held for sale by a retailer to the ultimate customer. ...

40 CFR 370.13 - What substances are exempt from these reporting requirements?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) SUPERFUND, EMERGENCY PLANNING, AND COMMUNITY RIGHT-TO-KNOW PROGRAMS HAZARDOUS CHEMICAL REPORTING... OSHA regulations, or that are excluded from the definition of hazardous chemical under EPCRA section... a fertilizer held for sale by a retailer to the ultimate customer. ...

40 CFR 370.13 - What substances are exempt from these reporting requirements?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) SUPERFUND, EMERGENCY PLANNING, AND COMMUNITY RIGHT-TO-KNOW PROGRAMS HAZARDOUS CHEMICAL REPORTING... OSHA regulations, or that are excluded from the definition of hazardous chemical under EPCRA section... a fertilizer held for sale by a retailer to the ultimate customer. ...

40 CFR 370.13 - What substances are exempt from these reporting requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) SUPERFUND, EMERGENCY PLANNING, AND COMMUNITY RIGHT-TO-KNOW PROGRAMS HAZARDOUS CHEMICAL REPORTING... OSHA regulations, or that are excluded from the definition of hazardous chemical under EPCRA section... a fertilizer held for sale by a retailer to the ultimate customer. ...

Modeling an explosion : the devil is in the details

Treesearch

Peter W. Hart; Alan W. Rudie

2011-01-01

The Chemical Safety and Hazards Investigation Board has recently encouraged chemical engineering faculty to address student knowledge about reactive hazards in their curricula. This paper presents a simple approach that may be used to illustrate the importance of these types of safety considerations.

78 FR 65610 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD Sunshine Act Meeting TIME AND DATE: November 14... School Road, Rockford, IL 61108. STATUS: Open to the public. MATTERS TO BE CONSIDERED: The Chemical Safety and Hazard Investigation Board (CSB) will convene a public meeting on November 14, 2013, starting...

PRELIMINARY ASSESSMENT OF LIFE-CYCLE COSTS OF PROTECTIVE CLOTHING

EPA Science Inventory

Many different types of chemical protective clothing (CPC) are used to isolate workers at hazardous waste sites from contact with the potential hazards posed by chemical wastes. he goal in selecting the appropriate clothing for a particular occupational situation is to optimize w...

Notification: Key Management Challenges Confronting the U.S. Chemical Safety and Hazard Investigation Board - FY2016

EPA Pesticide Factsheets

January 21, 2016. The EPA OIG is beginning work to update for fiscal year 2016 its list of proposed key management challenges and internal control weaknesses confronting the U.S. Chemical Safety and Hazard Investigation Board (CSB).

Chemical incidents resulted in hazardous substances releases in the context of human health hazards.

PubMed

Pałaszewska-Tkacz, Anna; Czerczak, Sławomir; Konieczko, Katarzyna

2017-02-21

The research purpose was to analyze data concerning chemical incidents in Poland collected in 1999-2009 in terms of health hazards. The data was obtained, using multimodal information technology (IT) system, from chemical incidents reports prepared by rescuers at the scene. The final analysis covered sudden events associated with uncontrolled release of hazardous chemical substances or mixtures, which may potentially lead to human exposure. Releases of unidentified substances where emergency services took action to protect human health or environment were also included. The number of analyzed chemical incidents in 1999-2009 was 2930 with more than 200 different substances released. The substances were classified into 13 groups of substances and mixtures posing analogous risks. Most common releases were connected with non-flammable corrosive liquids, including: hydrochloric acid (199 cases), sulfuric(VI) acid (131 cases), sodium and potassium hydroxides (69 cases), ammonia solution (52 cases) and butyric acid (32 cases). The next group were gases hazardous only due to physico-chemical properties, including: extremely flammable propane-butane (249 cases) and methane (79 cases). There was no statistically significant trend associated with the total number of incidents. Only with the number of incidents with flammable corrosive, toxic and/or harmful liquids, the regression analysis revealed a statistically significant downward trend. The number of victims reported was 1997, including 1092 children and 18 fatalities. The number of people injured, number of incidents and the high 9th place of Poland in terms of the number of Seveso establishments, and 4 times higher number of hazardous industrial establishments not covered by the Seveso Directive justify the need for systematic analysis of hazards and their proper identification. It is advisable enhance health risk assessment, both qualitative and quantitative, by slight modification of the data collection system so as to enable the determination of released chemical concentration and exposed populations. Int J Occup Med Environ Health 2017;30(1):95-110. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

76 FR 56294 - National Oil and Hazardous Substances Pollution Contingency Plan National Priorities List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-13

... and Hazardous Substances Pollution Contingency Plan National Priorities List AGENCY: Environmental... pollution control, Chemicals, Hazardous Waste, Hazardous substances, Intergovernmental relations, Penalties, Reporting and recordkeeping requirements, Superfund, Water pollution control, Water supply. Authority: 33 U...

The hazards of hazard identification in environmental epidemiology.

PubMed

Saracci, Rodolfo

2017-08-09

Hazard identification is a major scientific challenge, notably for environmental epidemiology, and is often surrounded, as the recent case of glyphosate shows, by debate arising in the first place by the inherently problematic nature of many components of the identification process. Particularly relevant in this respect are components less amenable to logical or mathematical formalization and essentially dependent on scientists' judgment. Four such potentially hazardous components that are capable of distorting the correct process of hazard identification are reviewed and discussed from an epidemiologist perspective: (1) lexical mix-up of hazard and risk (2) scientific questions as distinct from testable hypotheses, and implications for the hierarchy of strength of evidence obtainable from different types of study designs (3) assumptions in prior beliefs and model choices and (4) conflicts of interest. Four suggestions are put forward to strengthen a process that remains in several aspects judgmental, but not arbitrary, in nature.

Integrative Chemical-Biological Read-Across Approach for Chemical Hazard Classification

PubMed Central

Low, Yen; Sedykh, Alexander; Fourches, Denis; Golbraikh, Alexander; Whelan, Maurice; Rusyn, Ivan; Tropsha, Alexander

2013-01-01

Traditional read-across approaches typically rely on the chemical similarity principle to predict chemical toxicity; however, the accuracy of such predictions is often inadequate due to the underlying complex mechanisms of toxicity. Here we report on the development of a hazard classification and visualization method that draws upon both chemical structural similarity and comparisons of biological responses to chemicals measured in multiple short-term assays (”biological” similarity). The Chemical-Biological Read-Across (CBRA) approach infers each compound's toxicity from those of both chemical and biological analogs whose similarities are determined by the Tanimoto coefficient. Classification accuracy of CBRA was compared to that of classical RA and other methods using chemical descriptors alone, or in combination with biological data. Different types of adverse effects (hepatotoxicity, hepatocarcinogenicity, mutagenicity, and acute lethality) were classified using several biological data types (gene expression profiling and cytotoxicity screening). CBRA-based hazard classification exhibited consistently high external classification accuracy and applicability to diverse chemicals. Transparency of the CBRA approach is aided by the use of radial plots that show the relative contribution of analogous chemical and biological neighbors. Identification of both chemical and biological features that give rise to the high accuracy of CBRA-based toxicity prediction facilitates mechanistic interpretation of the models. PMID:23848138

Forensic and homeland security applications of modern portable Raman spectroscopy.

PubMed

Izake, Emad L

2010-10-10

Modern detection and identification of chemical and biological hazards within the forensic and homeland security contexts may well require conducting the analysis in field while adapting a non-contact approach to the hazard. Technological achievements on both surface and resonance enhancement Raman scattering re-developed Raman spectroscopy to become the most adaptable spectroscopy technique for stand-off and non-contact analysis of hazards. On the other hand, spatially offset Raman spectroscopy proved to be very valuable for non-invasive chemical analysis of hazards concealed within non-transparent containers and packaging. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Simultaneous determination of intestinal permeability and potential drug interactions of complex mixtures using Caco-2 cells and high-resolution mass spectrometry: Studies with Rauwolfia serpentina extract.

PubMed

Flynn, Thomas J; Vohra, Sanah N

2018-06-25

Caco-2 cells are a commonly used model for estimating the intestinal bioavailability of single chemical entity pharmaceuticals. Caco-2 cells, when induced with calcitriol, also express other biological functions such as phase I (CYP) and phase II (glucuronosyltransferases) drug metabolizing enzymes which are relevant to drug-supplement interactions. Intestinal bioavailability is an important factor in the overall safety assessment of products consumed orally. Foods, including herbal dietary supplements, are complex substances with multiple chemical components. Because of potential interactions between components of complex mixtures, more reliable safety assessments can be obtained by studying the commercial products "as consumed" rather than by testing individual chemical components one at a time. The present study evaluated the apparent intestinal permeability (P app ) of a model herbal extract, Rauwolfia serpentina, using both whole plant extracts and the individual purified Rauwolfia alkaloids. All test compounds, endpoint substrates, and their metabolites were quantified using liquid chromatography and high-resolution mass spectrometry. The P app values for individual Rauwolfia alkaloids were comparable whether measured individually or as components of the complete extract. Both Rauwolfia extract and all individual Rauwolfia alkaloids except yohimbine inhibited CYP3A4 activity (midazolam 1'-hydroxylation). Both Rauwolfia extract and all individual Rauwolfia alkaloids except corynanthine and reserpic acid significantly increased glucuronosyltransferase activity (glucuronidation of 4-methylumbelliferone). The positive control, ketoconazole, significantly inhibited both CYP3A4 and glucuronosyltransferase activities. These findings suggest that the Caco-2 assay is capable of simultaneously identifying both bioavailability and potentially hazardous intestinal drug-supplement interactions in complex mixtures. Published by Elsevier B.V.

Chemical hazards associated with treatment of waste electrical and electronic equipment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsydenova, Oyuna; Bengtsson, Magnus, E-mail: bengtsson@iges.or.jp

2011-01-15

This review paper summarizes the existing knowledge on the chemical hazards associated with recycling and other end-of-life treatment options of waste electrical and electronic equipment (e-waste). The hazards arise from the presence of heavy metals (e.g., mercury, cadmium, lead, etc.), flame retardants (e.g., pentabromophenol, polybrominated diphenyl ethers (PBDEs), tetrabromobisphenol-A (TBBPA), etc.) and other potentially harmful substances in e-waste. If improperly managed, the substances may pose significant human and environmental health risks. The review describes the potentially hazardous content of e-waste, examines the existing e-waste management practices and presents scientific data on human exposure to chemicals, workplace and environmental pollution associatedmore » with the three major e-waste management options, i.e., recycling, incineration and landfilling. The existing e-waste management practices and associated hazards are reviewed separately for developed and developing countries. Finally, based on this review, the paper identifies gaps in the existing knowledge and makes some recommendations for future research.« less

Exploring the potential utility of high-throughput bioassays associated with US EPA Toxcast Program for effects-based monitoring and surveillance

EPA Science Inventory

Environmental monitoring and surveillance strategies are essential for identifying potential hazards of contaminant exposure to aquatic organisms. Chemical monitoring is effective for chemicals with well characterized hazards and for which sensitive analytical methods are availa...

40 CFR 1600.2 - Organization.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Organization. 1600.2 Section 1600.2 Protection of Environment CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD ORGANIZATION AND FUNCTIONS OF THE CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD § 1600.2 Organization. (a) The CSB's Board consists of five...

EMERGENCY RESPONSE EQUIPMENT TO CLEAN UP HAZARDOUS CHEMICAL RELEASES AT SPILLS AND UNCONTROLLED WASTE SITES

EPA Science Inventory

This paper reviews some of the research activities of the U.S. Environmental Protection Agency (EPA) regarding the development of emergency response equipment to control hazardous chemical releases. Several devices and systems have been developed by EPA for environmental emergenc...

40 CFR 1600.6 - Office location.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Office location. 1600.6 Section 1600.6 Protection of Environment CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD ORGANIZATION AND FUNCTIONS OF THE CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD § 1600.6 Office location. The principal offices of the...

Synthetic Organic Chemical Manufacturing Industry: Organic National Emission Standards for Hazardous Air Pollutants (NESHAP) - 40 CFR 63 Subparts F,G,H,I

EPA Pesticide Factsheets

Read about the National Emission Standards for Hazardous Air Pollutants (NESHAP) for the Synthetic Organic Chemical Manufacturing Industry. Read the rules, find the CFR text, dockets, effective dates, rule history and compliance information.

In Brief: Climate Change Science Program comment period; Ocean Commission comment period; Fine-tuning particulate matter research

NASA Astrophysics Data System (ADS)

Showstack, Randy

2004-04-01

Public comments on the draft guidelines for the synthesis and assessment products being prepared by the U.S. Climate Change Science Program are being accepted through 7 May; The long-anticipated preliminary report of the U.S. Commission on Ocean Policy is being released on 20 April. The comment period extends through 21 May; Determining the most hazardous chemical components and other characteristics of aerosol particulate matter should be a focus of research by the U.S. Environmental Protection Agency, according to a 24 March report by the National Academies' National Research Council.

A suggested approach to the selection of chemical and biological protective clothing--meeting industry and emergency response needs for protection against a variety of hazards.

PubMed

Stull, Jeffrey O

2004-01-01

The paper describes the development of a comprehensive decision logic for selection and use of biological and chemical protective clothing (BCPC). The decision logic recognizes the separate areas of BCPC use among emergency, biological, and chemical hazards. The proposed decision logic provides a system for type classifying BCPC in terms of its compliance with existing standards (for emergency applications), the overall clothing integrity, and the material barrier performance. Type classification is offered for garments, gloves, footwear, and eye/face protection devices. On the basis of multiple, but simply designed flowcharts, the type of BCPC appropriate for specific biological and chemical hazards can be selected. The decision logic also provides supplemental considerations for choosing appropriate BCPC features.

Occupational health surveillance: a means to identify work-related risks.

PubMed

Froines, J R; Dellenbaugh, C A; Wegman, D H

1986-09-01

The lack of successful disease surveillance methods has resulted in few reliable estimates of workplace-related disease. Hazard surveillance--the ongoing assessment of chemical use and worker exposure to the chemicals--is presented as a way to supplement occupational disease surveillance. Existing OSHA (Occupational Safety and Health Administration) and NIOSH (National Institute for Occupational Health) data systems are adapted to this function to characterize the distribution and type of hazardous industry in Los Angeles County. A new method is developed for ranking potentially hazardous industries in the county using actual exposure measurements from federal OSHA compliance inspections. The strengths of the different systems are presented along with considerations of industrial employment and types of specific chemical exposures. Applications for information from hazard surveillance are discussed in terms of intervention, monitoring exposure control, planning, research, and as a complement to disease surveillance.

Chemical hazards in health care: high hazard, high risk, but low protection.

PubMed

McDiarmid, Melissa A

2006-09-01

It is counter-intuitive that the healthcare industry, whose mission is the care of the sick, is itself a "high-hazard" industry for the workers it employs. Possessing every hazard class, with chemical agents in the form of pharmaceuticals, sterilants, and germicidals in frequent use, this industry sector consistently demonstrates poor injury and illness statistics, among the highest in the United States, and in the European Union (EU), 34% higher than the average work-related accident rate. In both the United States and the EU, about 10% of all workers are employed in the healthcare sector, and in developing countries as well, forecasts for the increasing need of healthcare workers (HCW) suggests a large population at potential risk of health harm. The explosion of technology growth in the healthcare sector, most obvious in pharmaceutical applications, has not been accompanied by a stepped up safety program in hospitals. Where there is hazard recognition, the remedies are often voluntary, and often poorly enforced. The wrong assumption that this industry would police itself, given its presumed knowledge base, has also been found wanting. The healthcare industry is also a significant waste generator threatening the natural environment with chemical and infectious waste and products of incineration. The ILO has recommended that occupational health goals for industrial nations focus on the hazards of new technology of which pharma and biopharma products are the leaders. This unchecked growth cannot continue without a parallel commitment to the health and safety of workers encountering these "high tech" hazards. Simple strategies to improve the present state include: (a) recognizing healthcare as a "high-hazard" employment sector; (b) fortifying voluntary safety guidelines to the level of enforceable regulation; (c) "potent" inspections; (d) treating hazardous pharmaceuticals like the chemical toxicants they are; and (e) protecting HCWs at least as well as workers in other high-hazard sectors.

Environmental and health hazard ranking and assessment of plastic polymers based on chemical composition.

PubMed

Lithner, Delilah; Larsson, Ake; Dave, Göran

2011-08-15

Plastics constitute a large material group with a global annual production that has doubled in 15 years (245 million tonnes in 2008). Plastics are present everywhere in society and the environment, especially the marine environment, where large amounts of plastic waste accumulate. The knowledge of human and environmental hazards and risks from chemicals associated with the diversity of plastic products is very limited. Most chemicals used for producing plastic polymers are derived from non-renewable crude oil, and several are hazardous. These may be released during the production, use and disposal of the plastic product. In this study the environmental and health hazards of chemicals used in 55 thermoplastic and thermosetting polymers were identified and compiled. A hazard ranking model was developed for the hazard classes and categories in the EU classification and labelling (CLP) regulation which is based on the UN Globally Harmonized System. The polymers were ranked based on monomer hazard classifications, and initial assessments were made. The polymers that ranked as most hazardous are made of monomers classified as mutagenic and/or carcinogenic (category 1A or 1B). These belong to the polymer families of polyurethanes, polyacrylonitriles, polyvinyl chloride, epoxy resins, and styrenic copolymers. All have a large global annual production (1-37 million tonnes). A considerable number of polymers (31 out of 55) are made of monomers that belong to the two worst of the ranking model's five hazard levels, i.e. levels IV-V. The polymers that are made of level IV monomers and have a large global annual production (1-5 million tonnes) are phenol formaldehyde resins, unsaturated polyesters, polycarbonate, polymethyl methacrylate, and urea-formaldehyde resins. This study has identified hazardous substances used in polymer production for which the risks should be evaluated for decisions on the need for risk reduction measures, substitution, or even phase out. Copyright © 2011 Elsevier B.V. All rights reserved.

Superfund record of decision amendment (EPA Region 5): Allied Chemical and Ironton Coke, Ironton, OH, September 30, 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This decision document, together with the Allied Chemical/Ironton Coke Record of Decision (ROD) dated December 28, 1990, the first Allied Chemical/Ironton Coke ROD Amendment dated July 31, 1995 (ROD Amendment No 1), and the second ROD Amendment dated September 4, 1997 (ROD Amendment No 2), presents the selected remedial action for the Allied Chemical/Ironton Coke site. The remedy selected in the 1990 ROD, 1995 ROD Amendment No. 1, and 1997 ROD Amendment No. 2 for the site is a final remedial action. Through ROD Amendment No. 3 the following components of the selected remedy are being modified: Replace in-situ bioremediationmore » of 457,000 cubic yards of soil in Lagoons 1--4 with hot spot excavation and wetland development; and Replace incineration of Lagoon 5 materials with recycling, treatment, and/or disposal of the K087 listed waste in an approved off-site hazardous waste facility and the use of the remaining material, excluding debris, as an alternative fuel.« less

ENVIRONMENTAL AND ENERGY QUALITY TECHNOLOGIES Task Order 0005: Organic Finishing Technologies Sub Task 11: High Speed, Substrate Safe Specialty Coating Laser Stripping

DTIC Science & Technology

2015-06-22

hazardous materials and eliminating the hazardous waste streams associated with wheat starch , chemical strippers and hand sanding. Additionally, the laser...chemical attack resistance and other special characteristics while providing corrosion protection. The materials used for these purposes are designed...inspection and/or replacement. Standard coating removal methods include chemical strippers, media blasting (i.e., wheat starch , plastic

Undergraduate Organic Chemistry Laboratory Safety

NASA Astrophysics Data System (ADS)

Luckenbaugh, Raymond W.

1996-11-01

Each organic chemistry student should become familiar with the educational and governmental laboratory safety requirements. One method for teaching laboratory safety is to assign each student to locate safety resources for a specific class laboratory experiment. The student should obtain toxicity and hazardous information for all chemicals used or produced during the assigned experiment. For example, what is the LD50 or LC50 for each chemical? Are there any specific hazards for these chemicals, carcinogen, mutagen, teratogen, neurotixin, chronic toxin, corrosive, flammable, or explosive agent? The school's "Chemical Hygiene Plan", "Prudent Practices for Handling Hazardous Chemicals in the Laboratory" (National Academy Press), and "Laboratory Standards, Part 1910 - Occupational Safety and Health Standards" (Fed. Register 1/31/90, 55, 3227-3335) should be reviewed for laboratory safety requirements for the assigned experiment. For example, what are the procedures for safe handling of vacuum systems, if a vacuum distillation is used in the assigned experiment? The literature survey must be submitted to the laboratory instructor one week prior to the laboratory session for review and approval. The student should then give a short presentation to the class on the chemicals' toxicity and hazards and describe the safety precautions that must be followed. This procedure gives the student first-hand knowledge on how to find and evaluate information to meet laboartory safety requirements.

The OSHA Hazardous Chemical Occupational Exposure Standard for Laboratories - A New Management Regulation to Ensure Employee Health

DTIC Science & Technology

1991-04-01

Hazardous Chemical Occupational Exposur PE - 87714F Standard for Laboratories- A New Management Regu- PR - SUPT lation to Ensure Employee Health TA - XX 6...produce acute or chronic adverse health effects in sional visitors such as guests or sales personnel. exposed workers . Health hazards include...standard is to safeguard the health and well- place and increases the likelihood of exposure. being of laboratory workers . The welfare of our person- A

49 CFR 195.4 - Compatibility necessary for transportation of hazardous liquids or carbon dioxide.

Code of Federal Regulations, 2010 CFR

2010-10-01

... hazardous liquids or carbon dioxide. 195.4 Section 195.4 Transportation Other Regulations Relating to... necessary for transportation of hazardous liquids or carbon dioxide. No person may transport any hazardous liquid or carbon dioxide unless the hazardous liquid or carbon dioxide is chemically compatible with both...

49 CFR 195.4 - Compatibility necessary for transportation of hazardous liquids or carbon dioxide.

Code of Federal Regulations, 2014 CFR

2014-10-01

... hazardous liquids or carbon dioxide. 195.4 Section 195.4 Transportation Other Regulations Relating to... necessary for transportation of hazardous liquids or carbon dioxide. No person may transport any hazardous liquid or carbon dioxide unless the hazardous liquid or carbon dioxide is chemically compatible with both...

Collaboration Between Environmental Water Chemistry Students and Hazardous Waste Treatment Specialists on the University of Colorado-Boulder Campus

NASA Astrophysics Data System (ADS)

Dittrich, T. M.

2012-12-01

The University of Colorado-Boulder is one of a few universities in the country that has a licensed Treatment, Storage, and Disposal Facility (TSDF) for hazardous waste on campus. This facility, located on the bottom floor of the Environmental Health and Safety (EH&S) building, allows CU to more economically treat hazardous waste by enabling treatment specialists on staff to safely collect and organize the hazardous waste generated on campus. Hazardous waste is anything that contains a regulated chemical or compound and most chemicals used in engineering labs (e.g., acids, solvents, metal solutions) fall into this category. The EH&S staff is able to treat close almost 33% of the waste from campus and the rest is packed for off-site treatment at various places all over the country for disposal (e.g., Sauget, IL, Port Aurthor, TX). The CU-Boulder campus produced over 50 tons of hazardous waste in 2010 costing over $300,000 in off-campus expenses. The EH&S staff assigns one of over 50 codes to the waste which will determine if the waste can be treated on campus of must be shipped off campus to be disposed of. If the waste can be treated on campus, it will undergo one of three processes: 1) neutralization, 2) UV-ozone oxidation, or 3) ion exchange. If the waste is acidic but contains no heavy metals, the acid is neutralized with sodium hydroxide (a base) and can be disposed "down the drain" to the Boulder Wastewater Treatment Plant. If the waste contains organic compounds and no metals, a UV-ozone oxidation system is used to break down the organic compounds. Silver from photography wastewater can be removed using ion exchange columns. Undergraduate and graduate students worked with the hazardous waste treatment facility at the Environmental Health and Safety (EH&S) building on the CU-Boulder campus during the fall of 2011 and fall of 2012. Early in the semester, students receive a tour of the three batch treatment processes the facility is equipped with. Later in the semester, the students conduct a bench-scale laboratory exercise where they study part of the treatment process. Several small start-up companies are testing components in the lab, which adds to the colaboration of the project.; Figure 1. Students in Environmental Water Chemistry lab conducting a titration.

Methodology for national risk analysis and prioritization of toxic industrial chemicals.

PubMed

Taxell, Piia; Engström, Kerstin; Tuovila, Juha; Söderström, Martin; Kiljunen, Harri; Vanninen, Paula; Santonen, Tiina

2013-01-01

The identification of chemicals that pose the greatest threat to human health from incidental releases is a cornerstone in public health preparedness for chemical threats. The present study developed and applied a methodology for the risk analysis and prioritization of industrial chemicals to identify the most significant chemicals that pose a threat to public health in Finland. The prioritization criteria included acute and chronic health hazards, physicochemical and environmental hazards, national production and use quantities, the physicochemical properties of the substances, and the history of substance-related incidents. The presented methodology enabled a systematic review and prioritization of industrial chemicals for the purpose of national public health preparedness for chemical incidents.

Identifying Candidate Chemical-Disease Linkages ...

EPA Pesticide Factsheets

Presentation at meeting on Environmental and Epigenetic Determinants of IBD in New York, NY on identifying candidate chemical-disease linkages by using AOPs to identify molecular initiating events and using relevant high throughput assays to screen for candidate chemicals. This hazard information is combined with exposure models to inform risk assessment. Presentation at meeting on Environmental and Epigenetic Determinants of IBD in New York, NY on identifying candidate chemical-disease linkages by using AOPs to identify molecular initiating events and using relevant high throughput assays to screen for candidate chemicals. This hazard information is combined with exposure models to inform risk assessment.

QSAR modeling of cumulative environmental end-points for the prioritization of hazardous chemicals.

PubMed

Gramatica, Paola; Papa, Ester; Sangion, Alessandro

2018-01-24

The hazard of chemicals in the environment is inherently related to the molecular structure and derives simultaneously from various chemical properties/activities/reactivities. Models based on Quantitative Structure Activity Relationships (QSARs) are useful to screen, rank and prioritize chemicals that may have an adverse impact on humans and the environment. This paper reviews a selection of QSAR models (based on theoretical molecular descriptors) developed for cumulative multivariate endpoints, which were derived by mathematical combination of multiple effects and properties. The cumulative end-points provide an integrated holistic point of view to address environmentally relevant properties of chemicals.

A review of photochemical approaches for the treatment of a wide range of pesticides.

PubMed

Reddy, P Venkata Laxma; Kim, Ki-Hyun

2015-03-21

Pesticides are renowned as some of the most pernicious chemicals known to humankind. Nine out of twelve most hazardous and persistent organic chemicals on planet have been identified as pesticides and their derivatives. Because of their strong recalcitrant nature, it often becomes a difficult task to treat them by conventional approaches. It is well perceived that many factors can interfere with the degradation of pesticides under ambient conditions, e.g., media, light intensity, humic content, and other biological components. However, for the effective treatment of pesticides, photochemical methods are viewed as having clear and perceivable advantages. In this article, we provide a review of the fundamental characteristics of photochemical approaches for pesticide treatment and the factors governing their capacity and potential in such a process. Copyright © 2014 Elsevier B.V. All rights reserved.

Complete Lesson 2: Pesky Pests and Household Hazards

EPA Pesticide Factsheets

Examines environmentally friendly ways to keep our homes and schools pest-free. Defines pests, pesticides, household hazards, chemicals, and toxic, and explores strategies for keeping common household hazards out of reach.

Safety in the Chemical Laboratory: Is Thioacetamide a Serious Health Hazard in Inorganic Chemistry Laboratories?

ERIC Educational Resources Information Center

Elo, Hannu

1987-01-01

Describes the potential health hazards of using thioacetamide in introductory courses where students are involved in qualitative inorganic analysis. Describes the chemical as possessing carcinogenic, hepatotoxic, and mutagenic properties. Cautions that thioacetamide has caused various biochemical changes in the liver, and recommends limited uses…

BRINGING SCIENCE AND PLANNING TOGETHER: A CASE STUDY ON PROTECTING HUMAN HEALTH, SAFETY, AND WELFARE FROM VAPOR INTRUSION

EPA Science Inventory

Vapor intrusion is the movement of volatile chemicals in the subsurface that eventually contaminate the indoor air that people breathe in overlaying buildings. This often overlooked exposure pathway of hazardous chemicals is a significant environmental health hazard. The USEPA ...

29 CFR 1910.119 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2013 CFR

2013-07-01

... except for: (A) Hydrocarbon fuels used solely for workplace consumption as a fuel (e.g., propane used for...) Thermal and chemical stability data; and (vii) Hazardous effects of inadvertent mixing of different... inventory; (D) Safe upper and lower limits for such items as temperatures, pressures, flows or compositions...

29 CFR 1926.64 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (4535.9 kg) or more except for: (A) Hydrocarbon fuels used solely for workplace consumption as a fuel (e...) Thermal and chemical stability data; and (vii) Hazardous effects of inadvertent mixing of different...) Maximum intended inventory; (D) Safe upper and lower limits for such items as temperatures, pressures...

29 CFR 1926.64 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (4535.9 kg) or more except for: (A) Hydrocarbon fuels used solely for workplace consumption as a fuel (e...) Thermal and chemical stability data; and (vii) Hazardous effects of inadvertent mixing of different...) Maximum intended inventory; (D) Safe upper and lower limits for such items as temperatures, pressures...

29 CFR 1926.64 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (4535.9 kg) or more except for: (A) Hydrocarbon fuels used solely for workplace consumption as a fuel (e...) Thermal and chemical stability data; and (vii) Hazardous effects of inadvertent mixing of different...) Maximum intended inventory; (D) Safe upper and lower limits for such items as temperatures, pressures...

29 CFR 1910.119 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2012 CFR

2012-07-01

... except for: (A) Hydrocarbon fuels used solely for workplace consumption as a fuel (e.g., propane used for...) Thermal and chemical stability data; and (vii) Hazardous effects of inadvertent mixing of different... inventory; (D) Safe upper and lower limits for such items as temperatures, pressures, flows or compositions...

29 CFR 1910.119 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2014 CFR

2014-07-01

... except for: (A) Hydrocarbon fuels used solely for workplace consumption as a fuel (e.g., propane used for...) Thermal and chemical stability data; and (vii) Hazardous effects of inadvertent mixing of different... inventory; (D) Safe upper and lower limits for such items as temperatures, pressures, flows or compositions...

30 CFR 47.81 - Provisions for withholding trade secrets.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Provisions for withholding trade secrets. 47.81... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.81 Provisions for withholding trade secrets. (a) Operators may withhold the identity of a trade secret chemical, including the name...

30 CFR 47.81 - Provisions for withholding trade secrets.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Provisions for withholding trade secrets. 47.81... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.81 Provisions for withholding trade secrets. (a) Operators may withhold the identity of a trade secret chemical, including the name...

30 CFR 47.81 - Provisions for withholding trade secrets.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Provisions for withholding trade secrets. 47.81... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.81 Provisions for withholding trade secrets. (a) Operators may withhold the identity of a trade secret chemical, including the name...

30 CFR 47.81 - Provisions for withholding trade secrets.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Provisions for withholding trade secrets. 47.81... TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.81 Provisions for withholding trade secrets. (a) Operators may withhold the identity of a trade secret chemical, including the name...

40 CFR 156.78 - Precautionary statements for physical or chemical hazards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Precautionary statements for physical... Precautionary Statements § 156.78 Precautionary statements for physical or chemical hazards. (a) Requirement... if a product meets the criteria in this section. Warning statements pertaining to other physical...

Exposure to Hazardous Chemical Substances--A Major Campus Environmental Health & Safety Concern.

ERIC Educational Resources Information Center

Robinson, Donald A.; Sorensen, Alfred J.

1980-01-01

A broad spectrum of potentially hazardous chemicals offers serious exposure risks to members of college and university communities. A formal program is needed to minimize exposure to these substances and maintain a prevention oriented protective program. The University of Massachusetts has developed such a program. (JN)

Emergency Planning and Community Right-to-Know Act Section 312 Tier Two report forms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, R.A.

2000-02-01

The report contains forms for the chemical description, physical and health hazards, inventory volumes, and storage codes and locations for all hazardous chemicals located at the Y-12 Plant. These can be used by local emergency response teams in case of an accident.

78 FR 78810 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

... CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD Sunshine Act Meeting TIME AND DATE: January 30, 2014, 6:30 p.m.-9:00 p.m. PST. PLACE: Brodniak Auditorium, Anacortes High School; 1600 20th St. Anacortes, WA 98221. STATUS: Open to the public. MATTERS TO BE CONSIDERED: The Chemical Safety and Hazard...

Emergency Planning and Community Right-To-Know Act Section 312 Tier Two report forms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, R.A.

2000-02-01

The report contains forms for the chemical description, physical and health hazards, inventory volumes, and storage codes and locations for all hazardous chemicals located at the Y-12 Plant. These can be used by local emergency response teams in case of an accident.

ENVIRONMENTALLY FRIENDLY TECHNOLOGIES AND THE USE OF LIFE CYCLE ANALYSIS TO EVALUATE THEIR "GREENNESS"

EPA Science Inventory

Currently, the chemical manufacturing industry generates more than one and a half billion tons of hazardous waste and nine billion tons of non-hazardous waste annually. Roughly one-third of the releases and transfers of chemicals reported through EPA's Toxic Release Inventory (T...

10 CFR 851.21 - Hazard identification and assessment.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... Procedures must include methods to: (1) Assess worker exposure to chemical, physical, biological, or safety..., biological, and safety workplace hazards using recognized exposure assessment and testing methodologies and... hazards and the established controls within 90 days after identifying such hazards. The Head of DOE Field...

10 CFR 851.21 - Hazard identification and assessment.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... Procedures must include methods to: (1) Assess worker exposure to chemical, physical, biological, or safety..., biological, and safety workplace hazards using recognized exposure assessment and testing methodologies and... hazards and the established controls within 90 days after identifying such hazards. The Head of DOE Field...

10 CFR 851.21 - Hazard identification and assessment.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... Procedures must include methods to: (1) Assess worker exposure to chemical, physical, biological, or safety..., biological, and safety workplace hazards using recognized exposure assessment and testing methodologies and... hazards and the established controls within 90 days after identifying such hazards. The Head of DOE Field...

Workplace Hazards Faced by Nursing Assistants in the United States: A Focused Literature Review

PubMed Central

Walton, AnnMarie Lee; Rogers, Bonnie

2017-01-01

Nursing assistants (NAs) make up a large share of the healthcare provider workforce and their numbers are expected to grow. NAs are predominantly women who earn a low wage and report financial, work, and family demands. Working as a NA is hazardous; this manuscript specifically examines the biological/infectious, chemical, enviromechanical, physical and psychosocial hazards that appear in the literature to date. A focused search strategy was used to review literature about hazards that fell into each of the five aforementioned domains. While some hazards that were documented were clear, such as exposure to influenza because of close contact with patients (biological/infectious), or exposure to hazardous drugs (chemical), literature was limited. The majority of the literature we reviewed fell into the domain of psychosocial hazards and centered on stress from workplace organization issues (such as mandatory overtime, lack of managerial support, and feeling rushed). More research is needed to understand which hazards NAs identify as most concerning and tailored interventions are needed for risk mitigation. PMID:28534859

Shelf life studies of common hazardous materials: An innovative approach to pollution prevention

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmanian, P.A.

1995-12-31

Hazardous chemical systems, ranging in form from simple materials to compounded products and complex natural mixtures, constitute an important asset in the Navy`s daily operations. These materials include but are not limited to paints, solvents, soaps, resins, adhesives, pesticides, printing materials, petroleum products, and photographic chemicals. The short-lived availability of hazardous materials that are suspected of or known to degrade over time imposes a unique burden on the Navy`s procurement and hazardous waste disposal systems. Hazardous Materials whose shelf life`s have expired are processed for disposal as hazardous wastes. In addition, these expired hazardous materials must be replaced with newmore » materials. Many shelf life codes are based solely on the recommendations of suppliers and are not critically subjected to scientific study. The important goal of this project is to conduct a comprehensive study of the degradation of a given hazardous material to determine the true shelf life.« less

Workplace Hazards Faced by Nursing Assistants in the United States: A Focused Literature Review.

PubMed

Walton, AnnMarie Lee; Rogers, Bonnie

2017-05-19

Nursing assistants (NAs) make up a large share of the healthcare provider workforce and their numbers are expected to grow. NAs are predominantly women who earn a low wage and report financial, work, and family demands. Working as a NA is hazardous; this manuscript specifically examines the biological/infectious, chemical, enviromechanical, physical and psychosocial hazards that appear in the literature to date. A focused search strategy was used to review literature about hazards that fell into each of the five aforementioned domains. While some hazards that were documented were clear, such as exposure to influenza because of close contact with patients (biological/infectious), or exposure to hazardous drugs (chemical), literature was limited. The majority of the literature we reviewed fell into the domain of psychosocial hazards and centered on stress from workplace organization issues (such as mandatory overtime, lack of managerial support, and feeling rushed). More research is needed to understand which hazards NAs identify as most concerning and tailored interventions are needed for risk mitigation.

Endocrine Disruption in Human Fetal Testis Explants by Individual and Combined Exposures to Selected Pharmaceuticals, Pesticides, and Environmental Pollutants

PubMed Central

Gaudriault, Pierre; Mazaud-Guittot, Séverine; Lavoué, Vincent; Coiffec, Isabelle; Lesné, Laurianne; Dejucq-Rainsford, Nathalie; Scholze, Martin; Kortenkamp, Andreas

2017-01-01

Background: Numerous chemicals are capable of disrupting androgen production, but the possibility that they might act together to produce effects greater than those of the most effective component in the mixture has not been studied directly in human tissues. Suppression of androgen synthesis in fetal life has been associated with testis maldescent, malformations of the genitalia at birth, and poor semen quality later in life. Objectives: Our aim was to investigate whether chemicals can act together to disrupt androgen production in human fetal testis explants and to evaluate the importance of mixture effects when characterizing the hazard of individual chemicals. Methods: We used an organotypic culture system of human fetal testes explants called FEtal Gonad Assay (FEGA) with tissue obtained at 10 and 12 gestational wk (GW 10–12), to screen 27 chemicals individually for their possible anti-androgenic effect. Based on the results of the screen, we selected 11 compounds and tested them as mixtures. Results: We evaluated mixtures composed of four and eight antiandrogens that contained the pharmaceuticals ketoconazole and theophylline and several previously untested chemicals, such as the pesticides imazalil and propiconazole. Mixtures of antiandrogens can suppress testosterone synthesis in human fetal testicular explants to an extent greater than that seen with individual chemicals. This revealed itself as a shift towards lower doses in the dose–response curves of individual antiandrogens that became more pronounced as the number of components increased from four to eight. Conclusions: Our results with the FEGA provide the foundations of a predictive human mixture risk assessment approach for anti-androgenic exposures in fetal life. https://doi.org/10.1289/EHP1014 PMID:28796631

Endocrine Disruption in Human Fetal Testis Explants by Individual and Combined Exposures to Selected Pharmaceuticals, Pesticides, and Environmental Pollutants.

PubMed

Gaudriault, Pierre; Mazaud-Guittot, Séverine; Lavoué, Vincent; Coiffec, Isabelle; Lesné, Laurianne; Dejucq-Rainsford, Nathalie; Scholze, Martin; Kortenkamp, Andreas; Jégou, Bernard

2017-08-04

Numerous chemicals are capable of disrupting androgen production, but the possibility that they might act together to produce effects greater than those of the most effective component in the mixture has not been studied directly in human tissues. Suppression of androgen synthesis in fetal life has been associated with testis maldescent, malformations of the genitalia at birth, and poor semen quality later in life. Our aim was to investigate whether chemicals can act together to disrupt androgen production in human fetal testis explants and to evaluate the importance of mixture effects when characterizing the hazard of individual chemicals. We used an organotypic culture system of human fetal testes explants called FEtal Gonad Assay (FEGA) with tissue obtained at 10 and 12 gestational wk (GW 10-12), to screen 27 chemicals individually for their possible anti-androgenic effect. Based on the results of the screen, we selected 11 compounds and tested them as mixtures. We evaluated mixtures composed of four and eight antiandrogens that contained the pharmaceuticals ketoconazole and theophylline and several previously untested chemicals, such as the pesticides imazalil and propiconazole. Mixtures of antiandrogens can suppress testosterone synthesis in human fetal testicular explants to an extent greater than that seen with individual chemicals. This revealed itself as a shift towards lower doses in the dose-response curves of individual antiandrogens that became more pronounced as the number of components increased from four to eight. Our results with the FEGA provide the foundations of a predictive human mixture risk assessment approach for anti-androgenic exposures in fetal life. https://doi.org/10.1289/EHP1014.

Evidence-based patient decontamination: an integral component of mass exposure chemical incident planning and response.

PubMed

Leary, Adam D; Schwartz, Michael D; Kirk, Mark A; Ignacio, Joselito S; Wencil, Elaine B; Cibulsky, Susan M

2014-06-01

Decontaminating patients who have been exposed to hazardous chemicals can directly benefit the patients' health by saving lives and reducing the severity of toxicity. While the importance of decontaminating patients to prevent the spread of contamination has long been recognized, its role in improving patient health outcomes has not been as widely appreciated. Acute chemical toxicity may manifest rapidly-often minutes to hours after exposure. Patient decontamination and emergency medical treatment must be initiated as early as possible to terminate further exposure and treat the effects of the dose already absorbed. In a mass exposure chemical incident, responders and receivers are faced with the challenges of determining the type of care that each patient needs (including medical treatment, decontamination, and behavioral health support), providing that care within the effective window of time, and protecting themselves from harm. The US Department of Health and Human Services and Department of Homeland Security have led the development of national planning guidance for mass patient decontamination in a chemical incident to help local communities meet these multiple, time-sensitive health demands. This report summarizes the science on which the guidance is based and the principles that form the core of the updated approach.

Occupational skin hazards and prevalence of occupational skin diseases in shoe manufacturing workers in Indonesia.

PubMed

Febriana, Sri Awalia; Soebono, Hardyanto; Coenraads, Pieter-Jan

2014-02-01

Shoe manufacturing workers are exposed daily to an extensive range of potential physical and chemical occupational hazards. Shoe manufacturing in Indonesia is one of the industrial sectors that has shown sustained growth amongst the newly industrialized countries (NICs). In this study, we investigated the possible potential exposure of the workers to physical and occupational hazards and determined the prevalence of occupational skin diseases at a shoe manufacturing factory in Indonesia. A cross-sectional study on the observation of the working process and an inventory and risk assessment of exposure to the chemicals used. Classification of chemicals as potential sensitizers/irritants and qualitative assessments of these chemicals were done. Workers were examined and interviewed using the Nordic Occupational Skin Questionnaire-2002/LONG. The risk of Occupational skin diseases (OSD) at the shoe factory was mainly related to the exposure of the workers' skin to potential physical and chemical hazards in hot and humid environmental conditions. From a total of 514 workers, 8.5 % reported current OSD and 4.8 % reported a history of OSD. Occupational skin diseases were diagnosed in 29 % of the workers by dermatologists and 7.6 % had an occupational contact dermatitis (OCD). Of the 39 workers with contact dermatitis, 33 consented to being patch tested, 14 (3 %) workers showed a positive results and considered as having an occupational allergic contact dermatitis (OACD) and 25 (4.9 %) had an occupational irritant contact dermatitis (OICD). We observed a repeated and prolonged exposure of the workers to numerous physical and chemical skin hazards at this factory.

Comparing Data from the Poisons Information Centre with Employers' Accident Reports Reveal Under-Recognized Hazards at the Workplace.

PubMed

Schenk, Linda; Öberg, Mattias

2018-05-28

Records of injuries and incidents provide an important basis for injury prevention related to hazardous substances at the workplace. The present study aimed to review available data on injuries and incidents involving hazardous substances and investigate how data from the Poisons Information Centre could complement the records of the Swedish Work Environment Authority. We found two major obstacles for using injury/incident data based on employers' mandatory reporting. First, it was not possible to quickly and reliably identify injuries caused by hazardous substances, and second, data identifying substances or products are not systematically included. For two out of five investigated injuries with lost working days likely due to chemical injuries, we could not identify substances and/or products involved. The records based on calls to the Poisons Information Centre allow better understanding of chemical hazards and products. Besides the large share of unidentified chemical hazards in the injury statistics, the most striking difference was found for cleaning agents. Cleaning agents were implicated in one-third of the occupational cases that the consulting Poisons Information Centre expert judged to pose a major risk and in need of immediate healthcare. Only one in 10 injuries with lost days reported by employers was related to this type of product. The identification of exposures and symptoms by the Poisons Information Centre allow recognition of chemicals with problematic occupational uses. Hence, these records may serve as an important complement to official injury statistics related to incidents with hazardous substances at work.

Environmental and Energy Quality Technologies. Task Order 0005: Organic Finishing Technologies, Sub Task 11: High Speed, Substrate Safe Specialty Coating Laser Stripping : Project: WP 2146

DTIC Science & Technology

2015-06-22

hazardous materials and eliminating the hazardous waste streams associated with wheat starch , chemical strippers and hand sanding. Additionally, the laser...chemical attack resistance and other special characteristics while providing corrosion protection. The materials used for these purposes are designed...inspection and/or replacement. Standard coating removal methods include chemical strippers, media blasting (i.e., wheat starch , plastic

75 FR 58346 - Hazardous Waste Management System; Identification and Listing of Hazardous Waste

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-24

... Chemical Company-Texas Operations (Eastman) to exclude (or delist) certain solid wastes generated by its Longview, Texas, facility from the lists of hazardous wastes. EPA used the Delisting Risk Assessment... Waste Management System; Identification and Listing of Hazardous Waste AGENCY: Environmental Protection...

The road to GHS: worker right-to-know in the 21st century.

PubMed

Karstadt, Myra L

2012-01-01

Of the three communications standards discussed, HI is definitely the outlier, as it emphasizes worker control of the process of identifying hazard and deemphasizes employer control of identification of hazards and dissemination of hazard information. GHS may not be as protective of American workers as HazCom is, but for workers in less-developed countries, where regulation of workplace health and safety is less strong than in the United States, Canada, many countries in Europe, and Japan, GHS--if adequately enforced-will likely represent an improvement in information on chemical hazards in the workplace. American workers may well see a decline in workplace protection against chemical hazards while protection may improve for workers in less-developed countries. This trade-off is part of the ongoing debate about globalization, of which worker protection from chemical hazards should be an important aspect. The next paper in this series will compare the proposed and final versions of GHS, and will discuss possible improvements to GHS to better serve American workers. As OSHA moves forward with the GHS rule, people and organizations concerned with worker right-to-know should consider possible improvements to GHS to better serve workers in the United States and worldwide.

Hazardous factories: Nigerian evidence.

PubMed

Oloyede, Olajide

2005-06-01

The past 15 years have seen an increasing governmental and corporate concern for the environment worldwide. For governments, information about the environmental performance of the industrial sector is required to inform macro-level decisions about environmental targets such as those required to meet UN directives. However, in many African, Asian, and Latin American countries, researching and reporting company environmental performance is limited. This article serves as a contribution to filling the gap by presenting evidence of physical and chemical risk in Nigerian factories. One hundred and three factories with a total of 5,021 workers were studied. One hundred and twenty physical and chemical hazards were identified and the result shows a high number of workers exposed to such hazards. The study also reveals that workers' awareness level of chemical hazards was high. Yet the danger was perceived in behavioral terms, especially by manufacturing firms, which tend to see environmental investment in an increasingly global economy as detrimental to profitability.

16 CFR 1500.127 - Substances with multiple hazards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the common or usual name (or the chemical name if there is no common or usual name) for each hazardous... combined with parallel information concerning any additional hazards presented by the article if the...

New Chemicals Program under TSCA Chemical Categories Document

EPA Pesticide Factsheets

The categories included in this compilation represent chemicals for which sufficient assessment experience has been accumulated so that hazard concerns and testing recommendations vary little from chemical to chemical within the category.

Genetic k-Means Clustering Approach for Mapping Human Vulnerability to Chemical Hazards in the Industrialized City: A Case Study of Shanghai, China

PubMed Central

Shi, Weifang; Zeng, Weihua

2013-01-01

Reducing human vulnerability to chemical hazards in the industrialized city is a matter of great urgency. Vulnerability mapping is an alternative approach for providing vulnerability-reducing interventions in a region. This study presents a method for mapping human vulnerability to chemical hazards by using clustering analysis for effective vulnerability reduction. Taking the city of Shanghai as the study area, we measure human exposure to chemical hazards by using the proximity model with additionally considering the toxicity of hazardous substances, and capture the sensitivity and coping capacity with corresponding indicators. We perform an improved k-means clustering approach on the basis of genetic algorithm by using a 500 m × 500 m geographical grid as basic spatial unit. The sum of squared errors and silhouette coefficient are combined to measure the quality of clustering and to determine the optimal clustering number. Clustering result reveals a set of six typical human vulnerability patterns that show distinct vulnerability dimension combinations. The vulnerability mapping of the study area reflects cluster-specific vulnerability characteristics and their spatial distribution. Finally, we suggest specific points that can provide new insights in rationally allocating the limited funds for the vulnerability reduction of each cluster. PMID:23787337

78 FR 41853 - Safety Advisory Guidance: Heating Rail Tank Cars To Prepare Hazardous Material for Unloading or...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... rail tank car due to chemical self-reaction and expansion of the toluene diisocyanate matter wastes. On...: Cheryl West Freeman, Division of Engineering and Research, Pipeline and Hazardous Materials Safety... catastrophically ruptured at a transfer station at the BASF Corporation chemical facility in Freeport, Texas. The...

Hazardous Waste Processing in the Chemical Engineering Curriculum.

ERIC Educational Resources Information Center

Dorland, Dianne; Baria, Dorab N.

1995-01-01

Describes a sequence of two courses included in the chemical engineering program at the University of Minnesota, Duluth that deal with the processing of hazardous wastes. Covers course content and structure, and discusses developments in pollution prevention and waste management that led to the addition of these courses to the curriculum.…

Support from Afar: Using Chemical Safety Information on the Internet.

ERIC Educational Resources Information Center

Stuart, Ralph

One of the major challenges facing people committed to Teaching Safety in High Schools, Colleges, and Universities is keeping up with both the wide range of relevant technical information about potential hazards (ranging from fire protection to chemical hazards to biological issues) and the ever-changing world of safety regulations and standards.…

40 CFR Table 8 to Subpart Ffff of... - Partially Soluble Hazardous Air Pollutants

Code of Federal Regulations, 2012 CFR

2012-07-01

... CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing Pt. 63, Subpt. FFFF, Table 8 Table 8 to Subpart FFFF of Part 63—Partially Soluble...: Chemical name . . . CAS No. 1. 1,1,1-Trichloroethane (methyl chloroform) 71556 2. 1,1,2,2-Tetrachloroethane...

40 CFR 370.42 - What is Tier II inventory information?

Code of Federal Regulations, 2010 CFR

2010-07-01

... phone number where such emergency information will be available 24 hours a day, every day. (h) An... the hazardous chemical present at your facility on any single day during the preceding calendar year... range codes are in § 370.43. (7) The maximum number of days that the hazardous chemical was present at...

30 CFR 47.86 - Denial of a written request for disclosure.

Code of Federal Regulations, 2011 CFR

2011-07-01

... EDUCATION AND TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.86 Denial of a written request for disclosure. To deny a written request for disclosure of the identity of a trade secret... claim that the chemical's identity is a trade secret, (2) Stating the specific reasons why the request...

30 CFR 47.86 - Denial of a written request for disclosure.

Code of Federal Regulations, 2014 CFR

2014-07-01

... EDUCATION AND TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.86 Denial of a written request for disclosure. To deny a written request for disclosure of the identity of a trade secret... claim that the chemical's identity is a trade secret, (2) Stating the specific reasons why the request...

30 CFR 47.86 - Denial of a written request for disclosure.

Code of Federal Regulations, 2010 CFR

2010-07-01

... EDUCATION AND TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.86 Denial of a written request for disclosure. To deny a written request for disclosure of the identity of a trade secret... claim that the chemical's identity is a trade secret, (2) Stating the specific reasons why the request...

30 CFR 47.86 - Denial of a written request for disclosure.

Code of Federal Regulations, 2013 CFR

2013-07-01

... EDUCATION AND TRAINING HAZARD COMMUNICATION (HazCom) Trade Secret Hazardous Chemical § 47.86 Denial of a written request for disclosure. To deny a written request for disclosure of the identity of a trade secret... claim that the chemical's identity is a trade secret, (2) Stating the specific reasons why the request...

Notification: FY 2017 Update of Proposed Key Management Challenges and Internal Control Weaknesses Confronting the U.S. Chemical Safety and Hazard Investigation Board

EPA Pesticide Factsheets

Jan 5, 2017. The EPA OIG is beginning work to update for fiscal year 2017 its list of proposed key management challenges and internal control weaknesses confronting the U.S. Chemical Safety and Hazard Investigation Board (CSB).

Impact of hazardous events on the removal of nutrients and trace organic contaminants by an anoxic-aerobic membrane bioreactor receiving real wastewater.

PubMed

Phan, Hop V; Hai, Faisal I; McDonald, James A; Khan, Stuart J; van de Merwe, Jason P; Leusch, Frederic D L; Zhang, Ren; Price, William E; Broeckmann, Andreas; Nghiem, Long D

2015-09-01

The impacts of four simulated hazardous events, namely, aeration failure, power loss, and chemical shocks (ammonia or bleach) on the performance of an anoxic-aerobic membrane bioreactor (MBR) receiving real wastewater were investigated. Hazardous events could alter pH and/or oxidation reduction potential of the mixed liquor and inhibit biomass growth, thus affecting the removal of bulk organics, nutrients and trace organic contaminants (TrOC). Chemical shocks generally exerted greater impact on MBR performance than aeration/power failure events, with ammonia shock exerting the greatest impact. Compared to total organic carbon, nutrient removal was more severely affected. Removal of the hydrophilic TrOCs that are resistant and/or occur at high concentrations in wastewater was notably affected. The MBR effectively reduced estrogenicity and toxicity from wastewater, but chemical shocks could temporarily increase the endocrine activity of the effluent. Depending on the chemical shock-dose and the membrane flux, hazardous events can exacerbate membrane fouling. Copyright © 2015 Elsevier Ltd. All rights reserved.

A decision analysis framework for estimating the potential hazards for drinking water resources of chemicals used in hydraulic fracturing fluids.

PubMed

Yost, Erin E; Stanek, John; Burgoon, Lyle D

2017-01-01

Despite growing concerns over the potential for hydraulic fracturing to impact drinking water resources, there are limited data available to identify chemicals used in hydraulic fracturing fluids that may pose public health concerns. In an effort to explore these potential hazards, a multi-criteria decision analysis (MCDA) framework was employed to analyze and rank selected subsets of these chemicals by integrating data on toxicity, frequency of use, and physicochemical properties that describe transport in water. Data used in this analysis were obtained from publicly available databases compiled by the United States Environmental Protection Agency (EPA) as part of a larger study on the potential impacts of hydraulic fracturing on drinking water. Starting with nationwide hydraulic fracturing chemical usage data from EPA's analysis of the FracFocus Chemical Disclosure Registry 1.0, MCDAs were performed on chemicals that had either noncancer toxicity values (n=37) or cancer-specific toxicity values (n=10). The noncancer MCDA was then repeated for subsets of chemicals reported in three representative states (Texas, n=31; Pennsylvania, n=18; and North Dakota, n=20). Within each MCDA, chemicals received scores based on relative toxicity, relative frequency of use, and physicochemical properties (mobility in water, volatility, persistence). Results show a relative ranking of these chemicals based on hazard potential, and provide preliminary insight into chemicals that may be more likely than others to impact drinking water resources. Comparison of nationwide versus state-specific analyses indicates regional differences in the chemicals that may be of more concern to drinking water resources, although many chemicals were commonly used and received similar overall hazard rankings. Several chemicals highlighted by these MCDAs have been reported in groundwater near areas of hydraulic fracturing activity. This approach is intended as a preliminary analysis, and represents one possible method for integrating data to explore potential public health impacts. Published by Elsevier B.V.

Source reduction of VOC and hazardous organic emissions from wood furniture coatings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, E.W.; McCrillis, R.C.

1996-12-31

Under US EPA sponsorship, AeroVironment, Inc. and Adhesives Coating Co. are teaming up to develop and demonstrate a wood furniture coating system containing no volatile organic compounds (VOCs) and no hazardous air pollutants (HAPs), making it less hazardous to use, and emitting no detectable VOCs and HAPs during curing, therefore contributing significantly to emission reduction. Earlier work on a new topcoat showed excellent performance characteristics in terms of adhesion, gloss value, dry time, hardness, organic solvents content, and chemical/stain resistance. The VOC contents of both the clear topcoat and the white pigmented topcoat were less than 10 g/L, the detectionmore » list of the test method (EPA Method 24). This coating`s performance and properties compared favorably with those of other low-VOC waterborne coatings. Currently, low-/no-VOC stain and sealer wood coatings are being developed so that a complete low-/no-VOC wood coating system will be available for public use. The compatibility of coating components (a stain and sealer) to go with the topcoat is currently being evaluated. The complete system will be demonstrated at several furniture plants. A marketing plan of the developed products is part of this demonstration project.« less

Chemical and biological work-related risks across occupations in Europe: a review.

PubMed

Montano, Diego

2014-01-01

Work-related health inequalities are determined to some extent by an unequal exposure to chemical and biological risk factors of disease. Although their potential economic burden in the European Union (EU-25) might be substantial, comprehensive reviews focusing on the distribution of these risks across occupational groups are limited. Thus, the main objective of this review is to provide a synopsis of the exposure to chemical and biological hazards across occupational groups. In addition, main industrial applications of hazardous substances are identified and some epidemiological evidence is discussed regarding societal costs and incidence rates of work-related diseases. Available lists of carcinogens, sensitisers, mutagens, reprotoxic substances and biological hazards were consulted. For each work-related hazard the main industrial application was identified in order to assess which ISCO occupational groups may be associated with direct exposure. Where available, information on annual tonnage production, risk assessment of the substances and pathogens, and other relevant data were collected and reported. Altogether 308 chemical and biological hazards were identified which may account to at least 693 direct exposures. These hazards concentrate on the following major occupational groups: technicians (ISCO 3), operators (ISCO 8), agricultural workers (ISCO 6) and workers in elementary occupations (ISCO 9). Common industrial applications associated with increased exposure rates relate among others to: (1) production or application of pigments, resins, cutting fluids, adhesives, pesticides and cleaning products, (2) production of rubber, plastics, textiles, pharmaceuticals and cosmetics, and (3) in agriculture, metallurgy and food processing industry, Societal costs of the unequal distribution of chemical and biological hazards across occupations depend on the corresponding work-related diseases and may range from 2900 EUR to 126000 EUR per case/year. Risk of exposure to chemical and biological risks and work-related disease incidence are highly concentrated on four occupational groups. The unequal burden of exposure across occupations is an important contributing factor leading to health inequalities in society. The bulk of societal costs, however, are actually being borne by the workers themselves. There is an urgent need of taking into account the health impact of production processes and services on workers' health.

Chemical and biological work-related risks across occupations in Europe: a review

PubMed Central

2014-01-01

Background Work-related health inequalities are determined to some extent by an unequal exposure to chemical and biological risk factors of disease. Although their potential economic burden in the European Union (EU-25) might be substantial, comprehensive reviews focusing on the distribution of these risks across occupational groups are limited. Thus, the main objective of this review is to provide a synopsis of the exposure to chemical and biological hazards across occupational groups. In addition, main industrial applications of hazardous substances are identified and some epidemiological evidence is discussed regarding societal costs and incidence rates of work-related diseases. Methods Available lists of carcinogens, sensitisers, mutagens, reprotoxic substances and biological hazards were consulted. For each work-related hazard the main industrial application was identified in order to assess which ISCO occupational groups may be associated with direct exposure. Where available, information on annual tonnage production, risk assessment of the substances and pathogens, and other relevant data were collected and reported. Results Altogether 308 chemical and biological hazards were identified which may account to at least 693 direct exposures. These hazards concentrate on the following major occupational groups: technicians (ISCO 3), operators (ISCO 8), agricultural workers (ISCO 6) and workers in elementary occupations (ISCO 9). Common industrial applications associated with increased exposure rates relate among others to: (1) production or application of pigments, resins, cutting fluids, adhesives, pesticides and cleaning products, (2) production of rubber, plastics, textiles, pharmaceuticals and cosmetics, and (3) in agriculture, metallurgy and food processing industry, Societal costs of the unequal distribution of chemical and biological hazards across occupations depend on the corresponding work-related diseases and may range from 2900 EUR to 126000 EUR per case/year. Conclusions Risk of exposure to chemical and biological risks and work-related disease incidence are highly concentrated on four occupational groups. The unequal burden of exposure across occupations is an important contributing factor leading to health inequalities in society. The bulk of societal costs, however, are actually being borne by the workers themselves. There is an urgent need of taking into account the health impact of production processes and services on workers’ health. PMID:25071862

Constituent bioconcentration in rainbow trout exposed to a complex chemical mixture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linder, G.; Bergman, H.L.; Meyer, J.S.

1984-09-01

Classically, aquatic contaminant fate models predicting a chemical's bioconcentration factor (BCF) are based upon single-compound derived models, yet such BCF predictions may deviate from observed BCFs when physicochemical interactions or biological responses to complex chemical mixture exposures are not adequately considered in the predictive model. Rainbow trout were exposed to oil-shale retort waters. Such a study was designed to model the potential biological effects precluded by exposure to complex chemical mixtures such as solid waste leachates, agricultural runoff, and industrial process waste waters. Chromatographic analysis of aqueous and nonaqueous liquid-liquid reservoir components yielded differences in mixed extraction solvent HPLC profilesmore » of whole fish exposed for 1 and 3 weeks to the highest dilution of the complex chemical mixture when compared to their corresponding control, yet subsequent whole fish extractions at 6, 9, 12, and 15 weeks into exposure demonstrated no qualitative differences between control and exposed fish. Liver extractions and deproteinized bile samples from exposed fish were qualitatively different than their corresponding controls. These findings support the projected NOEC of 0.0045% dilution, even though the differences in bioconcentration profiles suggest hazard assessment strategies may be useful in evaluating environmental fate processes associated with complex chemical mixtures. 12 references, 4 figures, 2 tables.« less

Development of a flow-through system for the fish embryo toxicity test (FET) with the zebrafish (Danio rerio).

PubMed

Lammer, E; Kamp, H G; Hisgen, V; Koch, M; Reinhard, D; Salinas, E R; Wendler, K; Zok, S; Braunbeck, Th

2009-10-01

The acute fish test is still a mandatory component in chemical hazard and risk assessment. However, one of the objectives of the new European chemicals policy (REACH - Registration, Evaluation, Authorization and Restriction of Chemicals) is to promote non-animal testing. For whole effluent testing in Germany, the fish embryo toxicity test (FET) with the zebrafish (Danio rerio) has been an accepted and mandatory replacement of the fish test since January 2005. For chemical testing, however, further optimization of the FET is required to improve the correlation between the acute fish test and the alternative FET. Since adsorption of the test chemical to surfaces may reduce available exposure concentrations, a flow-through system for the FET using modified commercially available polystyrene 24-well microtiter plates was developed, thus combining the advantages of the standard FET with those of continuous delivery of test substances. The advantages of the design presented include: small test footprint, availability of adequate volumes of test solution for subsequent chemical analysis, and sufficient flow to compensate for effects of non-specific adsorption within 24h. The flow-through test system can also be utilized to conduct longer-term embryo larval fish tests, thus offering the possibility for teratogenicity testing.

Guide for Hydrogen Hazards Analysis on Components and Systems

NASA Technical Reports Server (NTRS)

Beeson, Harold; Woods, Stephen

2003-01-01

The physical and combustion properties of hydrogen give rise to hazards that must be considered when designing and operating a hydrogen system. One of the major concerns in the use of hydrogen is that of fire or detonation because of hydrogen's wide flammability range, low ignition energy, and flame speed. Other concerns include the contact and interaction of hydrogen with materials, such as the hydrogen embrittlement of materials and the formation of hydrogen hydrides. The low temperature of liquid and slush hydrogen bring other concerns related to material compatibility and pressure control; this is especially important when dissimilar, adjoining materials are involved. The potential hazards arising from these properties and design features necessitate a proper hydrogen hazards analysis before introducing a material, component, or system into hydrogen service. The objective of this guide is to describe the NASA Johnson Space Center White Sands Test Facility hydrogen hazards analysis method that should be performed before hydrogen is used in components and/or systems. The method is consistent with standard practices for analyzing hazards. It is recommended that this analysis be made before implementing a hydrogen component qualification procedure. A hydrogen hazards analysis is a useful tool for hydrogen-system designers, system and safety engineers, and facility managers. A hydrogen hazards analysis can identify problem areas before hydrogen is introduced into a system-preventing damage to hardware, delay or loss of mission or objective, and possible injury or loss of life.

Survey of safety practices among hospital laboratories in Oromia Regional State, Ethiopia.

PubMed

Sewunet, Tsegaye; Kebede, Wakjira; Wondafrash, Beyene; Workalemau, Bereket; Abebe, Gemeda

2014-10-01

Unsafe working practices, working environments, disposable waste products, and chemicals in clinical laboratories contribute to infectious and non-infectious hazards. Staffs, the community, and patients are less safe. Furthermore, such practices compromise the quality of laboratory services. We conducted a study to describe safety practices in public hospital laboratories of Oromia Regional State, Ethiopia. Randomly selected ten public hospital laboratories in Oromia Regional State were studied from Oct 2011- Feb 2012. Self-administered structured questionnaire and observation checklists were used for data collection. The respondents were heads of the laboratories, senior technicians, and safety officers. The questionnaire addressed biosafety label, microbial hazards, chemical hazards, physical/mechanical hazards, personal protective equipment, first aid kits and waste disposal system. The data was analyzed using descriptive analysis with SPSS version16 statistical software. All of the respondents reported none of the hospital laboratories were labeled with the appropriate safety label and safety symbols. These respondents also reported they may contain organisms grouped under risk group IV in the absence of microbiological safety cabinets. Overall, the respondents reported that there were poor safety regulations or standards in their laboratories. There were higher risks of microbial, chemical and physical/mechanical hazards. Laboratory safety in public hospitals of Oromia Regional State is below the standard. The laboratory workers are at high risk of combined physical, chemical and microbial hazards. Prompt recognition of the problem and immediate action is mandatory to ensure safe working environment in health laboratories.

HAZARDOUS SUBSTANCES DATA BANK (HSDB)

EPA Science Inventory

Hazardous Substances Data Bank (HSDB) is a factual, non-bibliographic data bank focusing upon the toxicology of potentially hazardous chemicals. It is enhanced with data from such related areas as emergency handling procedures, environmental fate, human exposure, detection method...

Environmental Assessment of the Construction of the Joint Use Small Arms Range for the 934th Airlift Wing at Minneapolis-St. paul International Airport Air Reserve Station, Minnesota

DTIC Science & Technology

2006-10-01

maintenance, off-aircraft engine testing, miscellaneous chemical usage, and dust collectors. Air quality emissions inventories for Minneapolis-St. Paul...applicable. Contractor responsibilities are to review potentially hazardous workplaces; to monitor exposure to workplace chemical (e.g., asbestos...perform occupational health physicals for those workers subject to any accidental chemical exposures or engaged in hazardous waste work. There are

Study Sensitivity: Evaluating the Ability to Detect Effects in Systematic Reviews of Chemical Exposures

PubMed Central

Cooper, Glinda S.; Lunn, Ruth M.; Ågerstrand, Marlene; Glenn, Barbara S.; Kraft, Andrew D.; Luke, April M.; Ratcliffe, Jennifer M.

2016-01-01

A critical step in systematic reviews of potential health hazards is the structured evaluation of the strengths and weaknesses of the included studies; risk of bias is a term often used to represent this process, specifically with respect to the evaluation of systematic errors that can lead to inaccurate (biased) results (i.e. focusing on internal validity). Systematic review methods developed in the clinical medicine arena have been adapted for use in evaluating environmental health hazards; this expansion raises questions about the scope of risk of bias tools and the extent to which they capture the elements that can affect the interpretation of results from environmental and occupational epidemiology studies and in vivo animal toxicology studies, (the studies typically available for assessment of risk of chemicals). One such element, described here as “sensitivity”, is a measure of the ability of a study to detect a true effect or hazard. This concept is similar to the concept of the sensitivity of an assay; an insensitive study may fail to show a difference that truly exists, leading to a false conclusion of no effect. Factors relating to study sensitivity should be evaluated in a systematic manner with the same rigor as the evaluation of other elements within a risk of bias framework. We discuss the importance of this component for the interpretation of individual studies, examine approaches proposed or in use to address it, and describe how it relates to other evaluation components. The evaluation domains contained within a risk of bias tool can include, or can be modified to include, some features relating to study sensitivity; the explicit inclusion of these sensitivity criteria with the same rigor and at the same stage of study evaluation as other bias-related criteria can improve the evaluation process. In some cases, these and other features may be better addressed through a separate sensitivity domain. The combined evaluation of risk of bias and sensitivity can be used to identify the most informative studies, to evaluate the confidence of the findings from individual studies and to identify those study elements that may help to explain heterogeneity across the body of literature. PMID:27156196

Federal Register Notice: State Authorization To Regulate the Hazardous Components of Radioactive Mixed Wastes Under the Resource Conservation and Recovery Act

EPA Pesticide Factsheets

The Environmental Protection Agency (EPA) is today publishing a notice that in order to obtain and maintain authorization to administer and enforce a hazardous waste program pursuant to Subtitle C of the Resource Conservation and Recovery Act (RCRA), States must have authority to regulate the hazardous components of 'radioactive mixed wastes.

SAR/QSAR methods in public health practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Demchuk, Eugene, E-mail: edemchuk@cdc.gov; Ruiz, Patricia; Chou, Selene

2011-07-15

Methods of (Quantitative) Structure-Activity Relationship ((Q)SAR) modeling play an important and active role in ATSDR programs in support of the Agency mission to protect human populations from exposure to environmental contaminants. They are used for cross-chemical extrapolation to complement the traditional toxicological approach when chemical-specific information is unavailable. SAR and QSAR methods are used to investigate adverse health effects and exposure levels, bioavailability, and pharmacokinetic properties of hazardous chemical compounds. They are applied as a part of an integrated systematic approach in the development of Health Guidance Values (HGVs), such as ATSDR Minimal Risk Levels, which are used to protectmore » populations exposed to toxic chemicals at hazardous waste sites. (Q)SAR analyses are incorporated into ATSDR documents (such as the toxicological profiles and chemical-specific health consultations) to support environmental health assessments, prioritization of environmental chemical hazards, and to improve study design, when filling the priority data needs (PDNs) as mandated by Congress, in instances when experimental information is insufficient. These cases are illustrated by several examples, which explain how ATSDR applies (Q)SAR methods in public health practice.« less

Solid waste production and its management in dental clinics in Gorgan, northern Iran.

PubMed

Nabizadeh, R; Faraji, H; Mohammadi, A A

2014-10-01

Waste produced in dental clinics has been the topic of investigations for many years. These waste materials have important health impacts and are hazardous to humans and the environment. To investigating solid waste production and its management in dental clinics in Gorgan, northern Iran. In this cross-sectional study, 45 of 143 public dental practices and 5 of 25 private dental practices were selected and studied. From each clinic, 3 samples were taken and analyzed at the end of successive working days (Tuesday and Wednesday). Samples were manually sorted into 50 components. The measured components were then classified on the basis of their characteristics, hazard potentials, and WHO classification. The total annual amount of dental waste produced in public and private dental practices in Gorgan was 12 015.1 and 3135.0 kg, respectively. Production percentages of infectious, domestic, chemical and pharmaceutical, and toxic waste in public dental practices were 38.4%, 33.7%, 6.6%, and 0.6%, respectively. The percentages for private practices were 8.7%, 10.6%, 1.1%, and 0.1%, respectively. Dental waste management in Gorgan is inadequate; dental waste is not properly segregated, collected, and disposed, as demanded by the WHO. Employees in dentist offices must be trained in correct handling of waste products and the associated risks.

How EPA Assesses Chemical Safety

EPA Pesticide Factsheets

EPA's existing chemicals programs address pollution prevention, risk assessment, hazard and exposure assessment and/or characterization, and risk management for chemicals substances in commercial use.

Current Chemical Risk Management Activities

EPA Pesticide Factsheets

EPA's existing chemicals programs address pollution prevention, risk assessment, hazard and exposure assessment and/or characterization, and risk management for chemicals substances in commercial use.

Joint Chemical Agent Detector (JCAD): the future of chemical agent detection

NASA Astrophysics Data System (ADS)

Laljer, Charles E.; Owen, Jeffery L.

2002-06-01

The Joint Chemical Agent Detector (JCAD) will provide state of the art chemical warfare agent detection capability to ground vehicle operators. Intelligence sources estimate that over twenty counties have active chemical weapons programs. The spread of chemical weapons to third world nations, coupled with the potential for US involvement in these areas in an operational or support capacity, increases the probability that the Joint Services may encounter chemical agents and toxic industrial materials anywhere in the world. Currently, fielded chemical agent detectors are bulky, labor intensive, and subject to false readings. No legacy detector is sensitive enough to provide detection and warning of the low dose hazards associated with miosis contamination. The JCAD will provide a small, lightweight chemical agent detector for vehicle interiors, aircraft, individual personnel, shipboard, and fixed site locations. The system provides a common detection components across multi-service platforms. This common detector system will allow the Joint Services to use the same operational and support concept for more efficient utilization of resources. The JCAD will detect, identify, quantify, and warn of the presence of chemical agents prior to onset of miosis. Upon detection of chemical agents, the detector will provide local and remote audible and visual alarms to the operators. Advance warning will provide the vehicle crew with the time necessary to protect themselves from the lethal effects of chemical agents. The JCAD will also be capable of being upgraded to protect against future chemical agent threats. The JCAD will provide the vehicle operators with the warning necessary to survive and fight in a chemical warfare agent threat environment.

Chemical Transport--Coping with Disasters.

ERIC Educational Resources Information Center

Rawls, Rebecca L.

1980-01-01

Describes operations of CHEMTREC, a chemical emergency information system supported by the Chemical Manufacturer's Association. Presents data on transportation incidents involving hazardous materials and the most frequently involved chemicals in transportation incidents. (CS)

Identification and assessment of hazardous compounds in drinking water.

PubMed

Fawell, J K; Fielding, M

1985-12-01

The identification of organic chemicals in drinking water and their assessment in terms of potential hazardous effects are two very different but closely associated tasks. In relation to both continuous low-level background contamination and specific, often high-level, contamination due to pollution incidents, the identification of contaminants is a pre-requisite to evaluation of significant hazards. Even in the case of the rapidly developing short-term bio-assays which are applied to water to indicate a potential genotoxic hazard (for example Ames tests), identification of the active chemicals is becoming a major factor in the further assessment of the response. Techniques for the identification of low concentrations of organic chemicals in drinking water have developed remarkably since the early 1970s and methods based upon gas chromatography-mass spectrometry (GC-MS) have revolutionised qualitative analysis of water. Such techniques are limited to "volatile" chemicals and these usually constitute a small fraction of the total organic material in water. However, in recent years there have been promising developments in techniques for "non-volatile" chemicals in water. Such techniques include combined high-performance liquid chromatography-mass spectrometry (HPLC-MS) and a variety of MS methods, involving, for example, field desorption, fast atom bombardment and thermospray ionisation techniques. In the paper identification techniques in general are reviewed and likely future developments outlined. The assessment of hazards associated with chemicals identified in drinking and related waters usually centres upon toxicology - an applied science which involves numerous disciplines. The paper examines the toxicological information needed, the quality and deployment of such information and discusses future research needs. Application of short-term bio-assays to drinking water is a developing area and one which is closely involved with, and to some extent dependent on, powerful methods of identification. Recent developments are discussed.

Acute hazardous substance releases resulting in adverse health consequences in children: Hazardous Substances Emergency Events Surveillance system, 1996-2003.

PubMed

Wattigney, Wendy A; Kaye, Wendy E; Orr, Maureen F

2007-11-01

Because of their small size and ongoing organ development, children may be more susceptible than adults to the harmful effects of toxic chemicals. The objective of the study reported here was to identify frequent locations, released substances, and factors contributing to short-term chemical exposures associated with adverse health consequences experienced by children. The study examined the Hazardous Substances Emergency Events Surveillance (HSEES) system data from 1996-2003. Eligible events involved the acute release of a hazardous substance associated with at least one child being injured. The study found that injured children were predominantly at school, home, or a recreational center when events took place. School-related events were associated with the accidental release of acids and the release of pepper spray by pranksters. Carbon monoxide poisonings occurring in the home, retail stores, entertainment facilities, and hotels were responsible for about 10 percent of events involving child victims. Chlorine was one of the top chemicals harmful to children, particularly at public swimming pools. Although human error contributed to the majority of releases involving child victims, equipment failure was responsible for most chlorine and ammonia releases. The authors conclude that chemical releases resulting in injury to children occur mostly in schools, homes, and recreational areas. Surveillance of acute hazardous chemical releases helped identify contributing causes and can guide the development of prevention outreach activities. Chemical accidents cannot be entirely prevented, but efforts can be taken to provide safer environments in which children can live, learn, and play. Wide dissemination of safety recommendations and education programs is required to protect children from needless environmental dangers.

The Hazard Analysis and Critical Control Points (HACCP) generic model for the production of Thai fermented pork sausage (Nham).

PubMed

Paukatong, K V; Kunawasen, S

2001-01-01

Nham is a traditional Thai fermented pork sausage. The major ingredients of Nham are ground pork meat and shredded pork rind. Nham has been reported to be contaminated with Salmonella spp., Staphylococcus aureus, and Listeria monocytogenes. Therefore, it is a potential cause of foodborne diseases for consumers. A Hazard Analysis and Critical Control Points (HACCP) generic model has been developed for the Nham process. Nham processing plants were observed and a generic flow diagram of Nham processes was constructed. Hazard analysis was then conducted. Other than microbial hazards, the pathogens previously found in Nham, sodium nitrite and metal were identified as chemical and physical hazards in this product, respectively. Four steps in the Nham process have been identified as critical control points. These steps are the weighing of the nitrite compound, stuffing, fermentation, and labeling. The chemical hazard of nitrite must be controlled during the weighing step. The critical limit of nitrite levels in the Nham mixture has been set at 100-200 ppm. This level is high enough to control Clostridium botulinum but does not cause chemical hazards to the consumer. The physical hazard from metal clips could be prevented by visual inspection of every Nham product during stuffing. The microbiological hazard in Nham could be reduced in the fermentation process. The critical limit of the pH of Nham was set at lower than 4.6. Since this product is not cooked during processing, finally, educating the consumer, by providing information on the label such as "safe if cooked before consumption", could be an alternative way to prevent the microbiological hazards of this product.

Safety in the Chemical Laboratory: Certifications for Professional Hazardous Materials and Waste Management.

ERIC Educational Resources Information Center

Fischer, Kenneth E.

1988-01-01

Discusses the need for determining a curriculum to provide qualified hazardous waste personnel. Describes the needed role of colleges and universities and current hazardous materials certification requirements. Lists requirements for 18 professional certifications. (MVL)

Traffic incident management in hazardous materials spills in incident clearance.

DOT National Transportation Integrated Search

2009-01-01

Hazardous materials spills provide unique challenges to traffic incident clearance. When hazardous materials are present, not only do response personnel have to deal with typical traffic incident issues, they also must deal with potential chemical ha...

77 FR 4522 - National Emission Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

... Manufacturing, Industrial Organic Chemical Manufacturing, Inorganic Pigments Manufacturing, Miscellaneous Organic Chemical Manufacturing, Plastic Materials and Resins Manufacturing, Pharmaceutical Production and... Intermediate Production, Industrial Inorganic Chemical Manufacturing, Industrial Organic Chemical Manufacturing...

Fact Sheet: Benzidine-Based Chemical Substances

EPA Pesticide Factsheets

EPA's existing chemicals programs address pollution prevention, risk assessment, hazard and exposure assessment and/or characterization, and risk management for chemicals substances in commercial use.

Perceptions regarding workplace hazards at a veterinary teaching hospital.

PubMed

Weaver, Dustin R; Newman, Lee S; Lezotte, Dennis C; Morley, Paul S

2010-07-01

To assess perceptions of personnel working at a veterinary teaching hospital regarding risks of occupational hazards and compare those perceptions with assessments made by occupational safety experts. Cross-sectional study. A representative sample of personnel (n = 90) working at the veterinary teaching hospital at Colorado State University and a panel of 3 occupational safety experts. Hospital personnel ranked perceptions of 14 physical, chemical, and biological workplace hazards and listed the injuries, illnesses, and near misses they had experienced. The expert panel provided consensus rankings of the same 14 hazards for 9 sections of the facility. Risk perceptions provided by the 2 sources were compared. Risk perceptions did not differ significantly between hospital personnel and the expert panel for most of the site-specific comparisons (94/126 [75%]). Personnel perceived greater risks for some physical hazards (loud noises, sharps injuries, and ionizing radiation) and some chemical or materials exposures (insecticides or pesticides and tissue digester emissions). In contrast, the expert panel perceived greater risks for physical hazards (bite or crush and restraining and moving animals), chemical exposures (anesthetic waste gas), and biological exposures (Toxoplasma gondii, antimicrobial-resistant bacteria, and allergens). Participants and safety experts had similar perceptions about occupational risks, but there were important differences where hospital personnel apparently overestimated or underappreciated the risks for workplace hazards. This type of study may be useful in guiding development of optimal workplace safety programs for veterinary hospitals.

New dimensions in our understanding of the human health effects of environmental pollutants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carpenter, D.O.

The term {open_quotes}hazardous{close_quotes} waste is used primarily in reference to potential hazards to human health and, to a lesser decree, hazards to wildlife and the ecosystem. Many of the chemicals associated with hazardous waste sites are also widely distributed throughout the environment; therefore, the health hazards associated with hazardous waste sites are not different from those associated with general environmental contamination. Until recently, it was generally assumed that cancer was the human disease of greatest concern associated with toxic chemicals. In fact, most governmental regulations related to exposure are designed on the basis of presumed cancer risks. Since the evidencemore » that hazardous chemicals can cause cancer is strong, it is appropriate to be concerned about cancer risk. Recent evidence, however, has triggered a reevaluation of the assumption that only cancer is of concern. New evidence suggests that noncancer endpoints may occur more frequently than cancer, may affect a greater number of individuals, and may occur at lower concentrations. Of particular concern is evidence of irreversible effects on the embryo and very young children, which influence intelligence, attention span, sexual development, and immune function. Although these effects are often subtle and difficult to quantify, the combined evidence is sufficiently compelling to necessitate a reevaluation of those outcomes of primary concern to human health. 57 refs., 2 figs., 3 tabs.« less

Analysis of the comprehensibility of chemical hazard communication tools at the industrial workplace.

PubMed

Ta, Goh Choo; Mokhtar, Mazlin Bin; Mohd Mokhtar, Hj Anuar Bin; Ismail, Azmir Bin; Abu Yazid, Mohd Fadhil Bin Hj

2010-01-01

Chemical classification and labelling systems may be roughly similar from one country to another but there are significant differences too. In order to harmonize various chemical classification systems and ultimately provide consistent chemical hazard communication tools worldwide, the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) was endorsed by the United Nations Economic and Social Council (ECOSOC). Several countries, including Japan, Taiwan, Korea and Malaysia, are now in the process of implementing GHS. It is essential to ascertain the comprehensibility of chemical hazard communication tools that are described in the GHS documents, namely the chemical labels and Safety Data Sheets (SDS). Comprehensibility Testing (CT) was carried out with a mixed group of industrial workers in Malaysia (n=150) and factors that influence the comprehensibility were analysed using one-way ANOVA. The ability of the respondents to retrieve information from the SDS was also tested in this study. The findings show that almost all the GHS pictograms meet the ISO comprehension criteria and it is concluded that the underlying core elements that enhance comprehension of GHS pictograms and which are also essential in developing competent persons in the use of SDS are training and education.

Environmental Effects of Weapons Technology, A Scientists' Institute for Public Information Workbook.

ERIC Educational Resources Information Center

McClintock, Michael; And Others

This collection of articles includes a general account of the environmental effects of modern weapons technology, a selection of news reports demonstrating the peacetime hazards of chemical and biological weapons, data on the physiological effects of the most common chemical weapons, a discussion of the hazards of biological weapons, a report of…

Evaluation of In Vitro Biotransformation Using HepaRG Cells to Improve High-Throughput Chemical Hazard Prediction: A Toxicogenomics Analysis (SOT)

EPA Science Inventory

The US EPA’s ToxCast program has generated a wealth of data in >600 in vitro assayson a library of 1060 environmentally relevant chemicals and failed pharmaceuticals to facilitate hazard identification. An inherent criticism of many in vitro-based strategies is the inability of a...

Computational Toxicology as Implemented by the U.S. EPA: Providing High Throughput Decision Support Tools for Screening and Assessing Chemical Exposure, Hazard and Risk

EPA Science Inventory

Computational toxicology is the application of mathematical and computer models to help assess chemical hazards and risks to human health and the environment. Supported by advances in informatics, high-throughput screening (HTS) technologies, and systems biology, the U.S. Environ...

The Element of Surprise: Preparing for the Possibility of Hazardous Materials within Archival Collections

ERIC Educational Resources Information Center

Wiener, Judith A.

2007-01-01

Unprocessed archival collections can contain unknown and potentially hazardous materials that can be harmful to other collections and staff. Archival literature largely focuses on collection and personnel dangers posed by environmental hazards such as mold and insect infestation but not on pharmaceutical and chemical hazards. In this article, the…

40 CFR Table 2 to Subpart F of... - Organic Hazardous Air Pollutants

Code of Federal Regulations, 2013 CFR

2013-07-01

... CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 2 Table 2 to Subpart F of Part 63—Organic Hazardous... 40 Protection of Environment 10 2013-07-01 2013-07-01 false Organic Hazardous Air Pollutants 2...

40 CFR Table 2 to Subpart F of... - Organic Hazardous Air Pollutants

Code of Federal Regulations, 2011 CFR

2011-07-01

... CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 2 Table 2 to Subpart F of Part 63—Organic Hazardous... 40 Protection of Environment 9 2011-07-01 2011-07-01 false Organic Hazardous Air Pollutants 2...

40 CFR Table 2 to Subpart F of... - Organic Hazardous Air Pollutants

Code of Federal Regulations, 2014 CFR

2014-07-01

... CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 2 Table 2 to Subpart F of Part 63—Organic Hazardous... 40 Protection of Environment 10 2014-07-01 2014-07-01 false Organic Hazardous Air Pollutants 2...

More About Hazard-Response Robot For Combustible Atmospheres

NASA Technical Reports Server (NTRS)

Stone, Henry W.; Ohm, Timothy R.

1995-01-01

Report presents additional information about design and capabilities of mobile hazard-response robot called "Hazbot III." Designed to operate safely in combustible and/or toxic atmosphere. Includes cameras and chemical sensors helping human technicians determine location and nature of hazard so human emergency team can decide how to eliminate hazard without approaching themselves.

OSHA safety requirements for hazardous chemicals in the workplace.

PubMed

Dohms, J

1992-01-01

This article outlines the Occupational Safety and Health Administration (OSHA) requirements set forth by the Hazard Communication Standard, which has been in effect for the healthcare industry since 1987. Administrators who have not taken concrete steps to address employee health and safety issues relating to hazardous chemicals are encouraged to do so to avoid the potential of large fines for cited violations. While some states administer their own occupational safety and health programs, they must adopt standards and enforce requirements that are at least as effective as federal requirements.

Total Diet Study: For a Closer-to-real Estimate of Dietary Exposure to Chemical Substances

PubMed Central

Lee, Jeeyeon; Kwon, Sungok; Yoon, Hae-Jung

2015-01-01

Recent amendment on the Food Sanitation Act in Korea mandated the Minister of Food & Drug Safety to secure the scientific basis for management and reevaluation of standards and specifications of foods. Especially because the current food safety control is limited within the scope of ‘Farm to Market’ covering from production to retail in Korea, safety control at the plane of true ‘Farm to Fork’ scope is urgently needed and should include ‘total diet’ of population instead of individual food items. Therefore, ‘Total Diet Study (TDS)’ which provides ‘closer-to-real’ estimates of exposure to hazardous materials through analysis on table-ready (cooked) samples of foods would be the solution to more comprehensive food safety management, as suggested by World Health Organization and Food and Agriculture Organization of the United Nations. Although the protection of diets from hazards must be considered as one of the most essential public health functions of any country, we may need to revisit the value of foods which has been too much underrated by the meaningless amount of some hazardous materials in Korea. Considering the primary value of foods lies on sustaining life, growth, development, and health promotion of human being, food safety control should be handled not only by the presence or absence of hazardous materials but also by maximizing the value of foods via balancing with the preservation of beneficial components in foods embracing total diet. In this regard, this article aims to provide an overview on TDS by describing procedures involved except chemical analysis which is beyond our scope. Also, details on the ongoing TDS in Korea are provided as an example. Although TDS itself might not be of keen interest for most readers, it is the main user of the safety reference values resulted from toxicological research in the public health perspective. PMID:26483882

DOE Office of Scientific and Technical Information (OSTI.GOV)

Selkirk, J.K.

The National Toxicology Program (NTP) was organized to support national public health programs by initiating research designed to understand the physiological, metabolic, and genetic basis for chemical toxicity. The primary mandated responsibilities of NTP were in vivo and vitro toxicity testing of potentially hazardous chemicals; broadening the spectrum of toxicological information on known hazardous chemicals; validating current toxicological assay systems as well as developing new and innovative toxicity testing technology; and rapidly communicating test results to government agencies with regulatory responsibilities and to the medical and scientific communities. 2 figs.

An expert system for prediction of aquatic toxicity of contaminants

USGS Publications Warehouse

Hickey, James P.; Aldridge, Andrew J.; Passino, Dora R. May; Frank, Anthony M.; Hushon, Judith M.

1990-01-01

The National Fisheries Research Center-Great Lakes has developed an interactive computer program in muLISP that runs on an IBM-compatible microcomputer and uses a linear solvation energy relationship (LSER) to predict acute toxicity to four representative aquatic species from the detailed structure of an organic molecule. Using the SMILES formalism for a chemical structure, the expert system identifies all structural components and uses a knowledge base of rules based on an LSER to generate four structure-related parameter values. A separate module then relates these values to toxicity. The system is designed for rapid screening of potential chemical hazards before laboratory or field investigations are conducted and can be operated by users with little toxicological background. This is the first expert system based on LSER, relying on the first comprehensive compilation of rules and values for the estimation of LSER parameters.

The use of plants for environmental monitoring and assessment.

PubMed

Wang, W; Freemark, K

1995-04-01

This paper presents a critical review on phytotoxicity tests for environmental monitoring and assessment. Vascular macrophytes used in the laboratory testing are emphasized; algae are mentioned only for comparison. Several issues are discussed, including the rationale for and misconceptions about phytotoxicity tests, relation to regulation, status of phytotoxicity test protocols, advantages and disadvantages of phytotoxicity tests, and possible research directions. Aquatic and terrestrial macrophytes, along with algae, are essential components of ecosystems. Macrophytes are becoming more important for the monitoring and assessment of herbicides, effluents, and industrial chemicals. In the United States, Canada, and international organizations, phytotoxicity tests can be required for environmental monitoring and assessment in statutes such as Federal Insecticide, Fungicide, and Rodenticide Act; Toxic Substances Control Act; Water Quality Act; Canadian Pest Control Products Act; and Canadian Environmental Protection Act. Possible research directions for phytotoxicity tests are discussed relative to the role in regulations of industrial chemicals, effluents, hazardous waste sites, and pesticides.

Hazardous chemical incidents in schools--United States, 2002-2007.

PubMed

2008-11-07

Chemicals that can cause adverse health effects are used in many elementary and secondary schools (e.g., in chemistry laboratories, art classrooms, automotive repair areas, printing and other vocational shops, and facility maintenance areas). Every year, unintentional and intentional releases of these chemicals, or related fires or explosions, occur in schools, causing injuries, costly cleanups, and lost school days. The federal Agency for Toxic Substances and Disease Registry (ATSDR) conducts national public health surveillance of chemical incidents through its Hazardous Substances Emergency Events Surveillance (HSEES) system. To identify school-related incidents and elucidate their causes and consequences to highlight the need for intervention, ATSDR conducted an analysis of HSEES data for 2002-2007. During that period, 423 chemical incidents in elementary and secondary schools were reported by 15 participating states. Mercury was the most common chemical released. The analysis found that 62% of reported chemical incidents at elementary and secondary schools resulted from human error (i.e., mistakes in the use or handling of a substance), and 30% of incidents resulted in at least one acute injury. Proper chemical use and management (e.g., keeping an inventory and properly storing, labeling, and disposing of chemicals) is essential to protect school building occupants. Additional education directed at raising awareness of the problem and providing resources to reduce the risk is needed to ensure that schools are safe from unnecessary dangers posed by hazardous chemicals.

Gas transport in unsaturated porous media: the adequacy of Fick's law

USGS Publications Warehouse

Thorstenson, D.C.; Pollock, D.W.

1989-01-01

The increasing use of natural unsaturated zones as repositories for landfills and disposal sites for hazardous wastes (chemical and radioactive) requires a greater understanding of transport processes in the unsaturated zone. For volatile constituents an important potential transport mechanism is gaseous diffusion. Diffusion, however, cannot be treated as an independent isolated transport mechanism. A complete understanding of multicomponent gas transport in porous media (unsaturated zones) requires a knowledge of Knudsen transport, the molecular and nonequimolar components of diffusive flux, and viscous (pressure driven) flux. This review presents a brief discussion of the underlying principles and interrelationships among each of the above flux mechanisms. -from Authors

Six Strategies for Chemical Waste Minimization in Laboratories.

ERIC Educational Resources Information Center

Matteson, Gary C.; Hadley, Cheri R.

1991-01-01

Guidelines are offered to research administrators for reducing the volume of hazardous laboratory waste. Suggestions include a chemical location inventory, a chemical reuse facility, progressive contracts with chemical suppliers, internal or external chemical recycling mechanisms, a "chemical conservation" campaign, and laboratory fees for…

40 CFR 68.50 - Hazard review.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 2 Prevention Program § 68.50 Hazard review. (a) The owner or operator shall conduct a review of the hazards associated with the regulated substances, process, and...

Identifying and Dealing with Hazardous Materials and Procedures in the General Chemistry Laboratory.

ERIC Educational Resources Information Center

Katz, David A.

1982-01-01

A survey of freshman chemistry laboratory manuals identified 15 questionable laboratory procedures, including the use of potentially hazardous chemicals. Alternatives are suggested for each hazard discussed (such as using a substitute solvent for benzene). (SK)

Personal Protective Equipment in Animal Research

PubMed Central

Villano, Jason S; Follo, Janet M; Chappell, Mark G; Jr, Morris T Collins

2017-01-01

The occupational health and safety program is an integral component of a comprehensive animal care and use program. It is important to mitigate the risk of exposures of animal care and research personnel to allergens and physical, chemical, radiologic, and biologic hazards during the conduct of various tasks. This need is especially true in infectious disease and biocontainment research. One aspect of the program is the provision of personal protective equipment (PPE). Commercially available PPE should be carefully evaluated based on their material composition and performance according to manufacturer data. To help institutions and end users by providing them guidance on choosing appropriate PPE, we here discuss the regulatory framework, device standards, and materials engineering for various PPE, including gloves, shoe covers, head caps, gowns, aprons, masks, hearing and eye protection devices, and respirators. Ultimately, the choice of appropriate PPE is based on the risk assessment, which should include consideration for personnel comfort, correct device fitting, and the containment level for the hazard used. PMID:28662749

Decontamination and management of human remains following incidents of hazardous chemical release.

PubMed

Hauschild, Veronique D; Watson, Annetta; Bock, Robert

2012-01-01

To provide specific guidance and resources for systematic and orderly decontamination of human remains resulting from a chemical terrorist attack or accidental chemical release. A detailed review and health-based decision criteria protocol is summarized. Protocol basis and logic are derived from analyses of compound-specific toxicological data and chemical/physical characteristics. Guidance is suitable for civilian or military settings where human remains potentially contaminated with hazardous chemicals may be present, such as sites of transportation accidents, terrorist operations, or medical examiner processing points. Guidance is developed from data-characterizing controlled experiments with laboratory animals, fabrics, and materiel. Logic and specific procedures for decontamination and management of remains, protection of mortuary affairs personnel, and decision criteria to determine when remains are sufficiently decontaminated are presented. Established procedures as well as existing materiel and available equipment for decontamination and verification provide reasonable means to mitigate chemical hazards from chemically exposed remains. Unique scenarios such as those involving supralethal concentrations of certain liquid chemical warfare agents may prove difficult to decontaminate but can be resolved in a timely manner by application of the characterized systematic approaches. Decision criteria and protocols to "clear" decontaminated remains for transport and processing are also provided. Once appropriate decontamination and verification have been accomplished, normal procedures for management of remains and release can be followed.

An Inverse Analysis Approach to the Characterization of Chemical Transport in Paints

PubMed Central

Willis, Matthew P.; Stevenson, Shawn M.; Pearl, Thomas P.; Mantooth, Brent A.

2014-01-01

The ability to directly characterize chemical transport and interactions that occur within a material (i.e., subsurface dynamics) is a vital component in understanding contaminant mass transport and the ability to decontaminate materials. If a material is contaminated, over time, the transport of highly toxic chemicals (such as chemical warfare agent species) out of the material can result in vapor exposure or transfer to the skin, which can result in percutaneous exposure to personnel who interact with the material. Due to the high toxicity of chemical warfare agents, the release of trace chemical quantities is of significant concern. Mapping subsurface concentration distribution and transport characteristics of absorbed agents enables exposure hazards to be assessed in untested conditions. Furthermore, these tools can be used to characterize subsurface reaction dynamics to ultimately design improved decontaminants or decontamination procedures. To achieve this goal, an inverse analysis mass transport modeling approach was developed that utilizes time-resolved mass spectroscopy measurements of vapor emission from contaminated paint coatings as the input parameter for calculation of subsurface concentration profiles. Details are provided on sample preparation, including contaminant and material handling, the application of mass spectrometry for the measurement of emitted contaminant vapor, and the implementation of inverse analysis using a physics-based diffusion model to determine transport properties of live chemical warfare agents including distilled mustard (HD) and the nerve agent VX. PMID:25226346

Essential Principles for Reform of Chemicals Management Legislation

EPA Pesticide Factsheets

EPA's existing chemicals programs address pollution prevention, risk assessment, hazard and exposure assessment and/or characterization, and risk management for chemicals substances in commercial use.

Infrared point sensors for homeland defense applications

NASA Astrophysics Data System (ADS)

Thomas, Ross C.; Carter, Michael T.; Homrighausen, Craig L.

2004-03-01

We report recent progress toward the development of infrared point sensors for the detection of chemical warfare agents and explosive related chemicals, which pose a significant threat to both health and environment. Technical objectives have focused on the development of polymer sorbents to enhance the infrared response of these hazardous organic compounds. For example, infrared point sensors which part-per-billion detection limits have been developed that rapidlypartition chemical warfare agents and explosive related chemicals into polymer thin films with desirable chemical and physical properties. These chemical sensors demonstrate novel routes to reversible sensing of hazardous organic compounds. The development of small, low-power, sensitive, and selective instruments employing these chemical sensors would enhance the capabilities of federal, state, and local emergency response to incidents involving chemical terrorism. Specific applications include chemical defense systems for military personnel and homeland defense, environmental monitors for remediation and demilitarization, and point source detectors for emergency and maintenance response teams.

Toward the Design of Less Hazardous Chemicals: Exploring Comparative Oxidative Stress in Two Common Animal Models.

PubMed

Corrales, Jone; Kristofco, Lauren A; Steele, W Baylor; Saari, Gavin N; Kostal, Jakub; Williams, E Spencer; Mills, Margaret; Gallagher, Evan P; Kavanagh, Terrance J; Simcox, Nancy; Shen, Longzhu Q; Melnikov, Fjodor; Zimmerman, Julie B; Voutchkova-Kostal, Adelina M; Anastas, Paul T; Brooks, Bryan W

2017-04-17

Sustainable molecular design of less hazardous chemicals presents a potentially transformative approach to protect public health and the environment. Relationships between molecular descriptors and toxicity thresholds previously identified the octanol-water distribution coefficient, log D, and the HOMO-LUMO energy gap, ΔE, as two useful properties in the identification of reduced aquatic toxicity. To determine whether these two property-based guidelines are applicable to sublethal oxidative stress (OS) responses, two common aquatic in vivo models, the fathead minnow (Pimephales promelas) and zebrafish (Danio rerio), were employed to examine traditional biochemical biomarkers (lipid peroxidation, DNA damage, and total glutathione) and antioxidant gene activation following exposure to eight structurally diverse industrial chemicals (bisphenol A, cumene hydroperoxide, dinoseb, hydroquinone, indene, perfluorooctanoic acid, R-(-)-carvone, and tert-butyl hydroperoxide). Bisphenol A, cumene hydroperoxide, dinoseb, and hydroquinone were consistent inducers of OS. Glutathione was the most consistently affected biomarker, suggesting its utility as a sensitivity response to support the design of less hazardous chemicals. Antioxidant gene expression (changes in nrf2, gclc, gst, and sod) was most significantly (p < 0.05) altered by R-(-)-carvone, cumene hydroperoxide, and bisphenol A. Results from the present study indicate that metabolism of parent chemicals and the role of their metabolites in molecular initiating events should be considered during the design of less hazardous chemicals. Current empirical and computational findings identify the need for future derivation of sustainable molecular design guidelines for electrophilic reactive chemicals (e.g., SN2 nucleophilic substitution and Michael addition reactivity) to reduce OS related adverse outcomes in vivo.

Modern concepts of treatment and prevention of chemical injuries.

PubMed

Edlich, Richard F; Farinholt, Heidi-Marie A; Winters, Kathryne L; Britt, L D; Long, William B; Werner, Charles L; Gubler, K Dean

2005-01-01

Chemical injuries are commonly encountered following exposure to acids and alkali, including hydrofluoric acid, formic acid, anhydrous ammonia, cement, and phenol. Other specific agents that cause chemical burns include white phosphorus, elemental metals, nitrates, hydrocarbons, and tar. Even though there are more than 65,000 chemicals available on the market, and an estimated 60,000 new chemicals produced each year, the potential deleterious effects of these chemicals on humans are still unknown. The Superfund Amendments and Reauthorization Act contains extensive provisions for emergency planning and the rights of communities to know about toxic chemical releases. Since 1990, the Agency for Toxic Substances and Disease Registry (ATSDR) has maintained an active, state-based Hazardous Substances Emergency Events Surveillance (HSEES) system to describe the public health consequences risked by access to hazardous chemicals. Most chemical agents damage the skin by producing a chemical reaction rather than hyperthermic injury. Although some chemicals produce considerable heat as a result of an exothermic reaction when they come in contact with water, their ability to produce direct chemical changes on the skin accounts for the most skin injury. Specific chemical changes depend on the agent, including acids, alkalis, corrosives, oxidizing and reducing agents, desiccants, vesicants, and protoplasmic poisons. The concentration of toxic agent and duration of its contact primarily determine degree of skin destruction. Hazardous materials (hazmats) are substances that may injure life and damage the environment if improperly handled. HAZMAT accidents are particularly dangerous for responding personnel, who are in danger from the moment of arrival on the scene until containment of the accident. Consequently, the Superfund Amendment and Reauthorization Act mandates community preparedness for dealing with hazmat accidents. Paramedics and members of the hazmat response team (usually firefighters) must work together to identify toxic chemicals and assess hazardous environments. The contingency plan for hazmat management can be divided into two parts: initiation of the site plan and evacuation. In coping with hazmat incidents, two distinct goals must be achieved concomitantly. First, hazmats must be contained, fire and explosions must be extinguished, and the site eventually must be cleaned. Second, those exposed to hazmats must be treated at the scene of contamination as well as in the hospital and rehabilitation setting.

An Analysis of Cumulative Risks Indicated by Biomonitoring ...

EPA Pesticide Factsheets

The Maximum Cumulative Ratio (MCR) quantifies the degree to which a single component of a chemical mixture drives the cumulative risk of a receptor.1 This study used the MCR, the Hazard Index (HI) and Hazard Quotient (HQ) to evaluate co-exposures to six phthalates using biomonitoring data in 2454 individuals aged 6 years and older from the 2011-12 cycle of the National Health and Nutrition Examination Survey. The values of MCR, HI and phthalate-specific HQs were determined by calculating steady-state doses consistent with the concentrations of phthalate metabolites in urine and using Tolerable Daily Intake values.2 There were 22 individuals (0.9%) predicted to have at least one HQ value > 1 and an additional 17 (0.7%) with no HQ value > 1 but with an HI value > 1. The percent of individuals with HI values > 1 differed by age (0.9% for individuals between 6 – 17 y and 1.9% for individuals > 17 y). There is a statistically significant negative relationship between HI and MCR values in both age groups (p-values 1 and all HQs 1 were 1.1 (1.0-1.3) and 2.8 (1.1-13.7), respectively. The combined assessment found that 17/39 (43%) of the individuals with HI values > 1 are missed by chemical-by-chemical assessments of the phthalates. These findings suggest that determining combined exposures for the six phthalates has a modest impact on the predictions of the chemicals’ risks. Additional individuals with HI values >1 are identified, but HI values in these individual

The formal electronic recycling industry: Challenges and opportunities in occupational and environmental health research.

PubMed

Ceballos, Diana Maria; Dong, Zhao

2016-10-01

E-waste includes electrical and electronic equipment discarded as waste without intent of reuse. Informal e-waste recycling, typically done in smaller, unorganized businesses, can expose workers and communities to serious chemical health hazards. It is unclear if formalization into larger, better-controlled electronics recycling (e-recycling) facilities solves environmental and occupational health problems. To systematically review the literature on occupational and environmental health hazards of formal e-recycling facilities and discuss challenges and opportunities to strengthen research in this area. We identified 37 publications from 4 electronic databases (PubMed, Web of Science, Environmental Index, NIOSHTIC-2) specific to chemical exposures in formal e-recycling facilities. Environmental and occupational exposures depend on the degree of formalization of the facilities but further reduction is needed. Reported worker exposures to metals were often higher than recommended occupational guidelines. Levels of brominated flame-retardants in worker's inhaled air and biological samples were higher than those from reference groups. Air, dust, and soil concentrations of metals, brominated flame-retardants, dioxins, furans, polycyclic-aromatic hydrocarbons, or polychlorinated biphenyls found inside or near the facilities were generally higher than reference locations, suggesting transport into the environment. Children of a recycler had blood lead levels higher than public health recommended guidelines. With mounting e-waste, more workers, their family members, and communities could experience unhealthful exposures to metals and other chemicals. We identified research needs to further assess exposures, health, and improve controls. The long-term solution is manufacturing of electronics without harmful substances and easy-to-disassemble components. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

16 CFR 1500.231 - Guidance for hazardous liquid chemicals in children's products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... poisoning from ingestion of the chemicals, pneumonia from aspiration of the chemicals into the lungs, and... poisoning and/or chemical pneumonia from aspiration. This determination resulted in recalls or in the...

16 CFR 1500.231 - Guidance for hazardous liquid chemicals in children's products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... poisoning from ingestion of the chemicals, pneumonia from aspiration of the chemicals into the lungs, and... poisoning and/or chemical pneumonia from aspiration. This determination resulted in recalls or in the...

Hazard House Workbook: A Workbook about Household Chemicals. Leader's Manual. Members Manual.

ERIC Educational Resources Information Center

California State Dept. of Toxic Substance Control, Sacramento.

The two books, the leader's manual and the members' manual address one environmental problem people come into contact with on a daily basis: potentially hazardous household products. The purpose of the books is to educate community groups about hazardous materials. The member's manual shares information about hazardous items and provides facts to…

40 CFR Table 4 to Subpart F of... - Organic Hazardous Air Pollutants Subject to Cooling Tower Monitoring Requirements in § 63.104

Code of Federal Regulations, 2011 CFR

2011-07-01

... STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table... 40 Protection of Environment 9 2011-07-01 2011-07-01 false Organic Hazardous Air Pollutants...

40 CFR Table 4 to Subpart F of... - Organic Hazardous Air Pollutants Subject to Cooling Tower Monitoring Requirements in § 63.104

Code of Federal Regulations, 2014 CFR

2014-07-01

... STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table... 40 Protection of Environment 10 2014-07-01 2014-07-01 false Organic Hazardous Air Pollutants...

40 CFR Table 4 to Subpart F of... - Organic Hazardous Air Pollutants Subject to Cooling Tower Monitoring Requirements in § 63.104

Code of Federal Regulations, 2013 CFR

2013-07-01

... STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table... 40 Protection of Environment 10 2013-07-01 2013-07-01 false Organic Hazardous Air Pollutants...

Toward Hazardless Waste: A Guide for Safe Use and Disposal of Hazardous Household Products.

ERIC Educational Resources Information Center

Toteff, Sally; Zehner, Cheri

This guide is designed to help individuals make responsible decisions about safe use and disposal of household products. It consists of eight sections dealing with: (1) hazardous chemicals in the home, how hazaradous products become hazardous waste, and whether a hazardous waste problem exists in Puget Sound; (2) which household wastes are…

Composite Material Hazard Assessment at Crash Sites

DTIC Science & Technology

2015-01-01

advanced composite materials. All personnel involved in rescue in close crash-site proximity are required to wear self -contained breathing apparatus...close crash-site proximity are required to wear self -contained breathing apparatus, chemical protective clothing, leather gloves, and neoprene...Take extra precaution when handling these materials. Nitrile rubber gloves can be worn underneath the leather gloves to provide chemical hazard

CHEMISTRY FOR THE SAFETY MAN. SAFETY IN INDUSTRY--ENVIRONMENTAL AND CHEMICAL HAZARDS SERVICES.

ERIC Educational Resources Information Center

CESTRONE, PATRICK F.

THIS BULLETIN, ONE OF A SERIES ON SAFETY IN INDUSTRY, IS INTENDED TO PROVIDE THE BACKGROUND WHICH WILL ENABLE THE SAFETY MAN TO UNDERSTAND SOME OF THE PRINCIPLES APPLIED IN CONTROLLING CHEMICAL HAZARDS. IT WAS PREPARED IN THE OFFICE OF OCCUPATIONAL SAFETY, DIVISION OF PROGRAMING AND RESEARCH, BUREAU OF LABOR STANDARDS. TOPICS INCLUDE (1) WHAT IS…

Management of toxic substances and hazardous wastes.

PubMed

Niemela, V E

1984-08-01

This paper describes the extent of the hazardous and toxic chemical waste problems in Canada and discusses the management, treatment, and disposal methods commonly used in North America and Europe. The treatment and disposal techniques covered are biological, physical-chemical, incineration technologies, and secure land disposal. Some of the available and emerging technologies for destruction of polychlorinated biphenyls are also described.

Precursors of dangerous substances formed in the loss of control of chemical systems.

PubMed

Cozzani, V; Zanelli, S

1999-03-01

Article 2 of Directive 96/82/EC on the control of major accident hazards caused by dangerous substances requires to consider also the hazards due to the dangerous substances "which it is believed may be generated during loss of control of an industrial chemical process", although no generally accepted guidelines are available for the identification of these substances. In the present study, the accidents involving the unwanted formation of dangerous substances as a consequence of the loss of control of chemical systems were investigated. A specifically developed database was used, containing data on more than 400 of these accidents and on the substances involved. The hazardous substances formed in the accidents and the precursors of these substances were identified. The influence of accident characteristics on the substances formed was investigated. In the context of the application of Directive 96/82/EC, an accident severity index and a hazard rating of the precursors of dangerous substances formed in the accidents were proposed. A lumping approach was used in order to develop schemes for the preliminary identification of substances that may be formed in the loss of control of chemical system. The results of accident analysis were used to test the schemes developed.

[Chemical hazards arising from shale gas extraction].

PubMed

Pakulska, Daria

2015-01-01

The development of the shale industry is gaining momentum and hence the analysis of chemical hazards to the environment and health of the local population is extreiely timely and important. Chemical hazards are created during the exploitation of all minerals, but in the case of shale gas production, there is much more uncertainty as regards to the effects of new technologies application. American experience suggests the increasing risk of environmental contamination, mainly groundwater. The greatest, concern is the incomplete knowledge of the composition of fluids used for fracturing shale rock and unpredictability of long-term effects of hydraulic fracturing for the environment and health of residents. High population density in the old continent causes the problem of chemical hazards which is much larger than in the USA. Despite the growing public discontent data on this subject are limited. First of all, there is no epidemiological studies to assess the relationship between risk factors, such as air and water pollution, and health effects in populations living in close proximity to gas wells. The aim of this article is to identify and discuss existing concepts on the sources of environmental contamination, an indication of the environment elements under pressure and potential health risks arising from shale gas extraction.

Chemical Safety Alert: Fire Hazard from Carbon Adsorption Deodorizing Systems

EPA Pesticide Factsheets

Activated carbon systems used to adsorb vapors for odor control may pose a fire hazard when used for certain types of substances, such as crude sulfate turpentine. Facilities should take precautions and proper procedures to avoid or mitigate these hazards.

Truck Transport of Hazardous Chemicals : Acetone

DOT National Transportation Integrated Search

1997-03-01

The transport of hazardous materials by all modes is a major concern of the U.S. Department of Transportation. Estimates place the total amount of hazardous materials transported in the U.S. in excess of 1.5 billion tons per year. Highway, water, and...

Truck Transport of Hazardous Chemicals : Isopropanol

DOT National Transportation Integrated Search

1997-12-01

The transport of hazardous materials by all modes is a major concern of the U.S. Department of Transportation. Estimates place the total amount of hazardous materials transported in the U.S. in excess of 1.5 billion tons per year. Highway, water, and...

Truck Transport of Hazardous Chemicals : Phosphorus Pentasulfide

DOT National Transportation Integrated Search

1996-08-01

The transport of hazardous materials by all modes is a major concern of the U.S. Department of Transportation. Estimates place the total amount of hazardous materials transported in the U.S. in excess of 1.5 billion tons per year. Highway, water, and...

Truck Transport of Hazardous Chemicals: 1-Butanol

DOT National Transportation Integrated Search

1995-09-01

The transport of hazardous materials by all modes is a major concern of the U.S. Department of Transportation. Estimates place the total amount of hazardous materials transported in the U.S. in excess of 1.5 billion tons per year. Highway, water, and...

Truck Transport of Hazardous Chemicals : Dodecene-1

DOT National Transportation Integrated Search

1996-09-01

The transport of hazardous materials by all modes is a major concern of the U.S. Department of Transportation. Estimates place the total amount of hazardous materials transported in the U.S. in excess of 1.5 billion tons per year. Highway, water, and...

Editor's Page: Management of Hazardous Wastes.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1980

1980-01-01

Discussed is the problem of management of hazardous waste disposal. Included are various federal laws and congressional kills pertinent to the problem of hazardous waste disposal. Suggested is cooperation between government and the chemical industry to work for a comprehensive solution to waste disposal. (DS)

Weapons of Mass Destruction Technology Evaluation and Training Range

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kevin Larry Young

2009-05-01

The Idaho National Laboratory (INL) has a long history for providing technology evaluation and training for military and other federal level Weapons of Mass Destruction (WMD) response agencies. Currently there are many federal organizations and commercial companies developing technologies related to detecting, assessing, mitigating and protecting against hazards associated with a WMD event. Unfortunately, very few locations exist within the United States where WMD response technologies are realistically field tested and evaluated using real chemical, biological, radiological, nuclear and explosive materials. This is particularly true with biological and radiological hazards. Related to this lack of adequate WMD, multi-hazard technology testingmore » capability is the shortage of locations where WMD response teams can train using actual chemical, biological, and radiological material or highly realistic simulates. In response to these technology evaluation and training needs, the INL has assembled a consortium of subject matter experts from existing programs and identified dedicated resources for the purpose of establishing an all-hazards, WMD technology evaluation and training range. The author describes the challenges associated with creating the all-hazards WMD technology evaluation and training range and lists the technical, logistical and financial benefits of an all-hazards technology evaluation and training range. Current resources and capabilities for conducting all-hazard technology evaluation and training at the INL are identified. Existing technology evaluation and training programs at the INL related to radiological, biological and chemical hazards are highlighted, including successes and lessons learned. Finally, remaining gaps in WMD technology evaluation and training capabilities are identified along with recommendations for closing those gaps.« less

Aiding alternatives assessment with an uncertainty-tolerant hazard scoring method.

PubMed

Faludi, Jeremy; Hoang, Tina; Gorman, Patrick; Mulvihill, Martin

2016-11-01

This research developed a single-score system to simplify and clarify decision-making in chemical alternatives assessment, accounting for uncertainty. Today, assessing alternatives to hazardous constituent chemicals is a difficult task-rather than comparing alternatives by a single definitive score, many independent toxicological variables must be considered at once, and data gaps are rampant. Thus, most hazard assessments are only comprehensible to toxicologists, but business leaders and politicians need simple scores to make decisions. In addition, they must balance hazard against other considerations, such as product functionality, and they must be aware of the high degrees of uncertainty in chemical hazard data. This research proposes a transparent, reproducible method to translate eighteen hazard endpoints into a simple numeric score with quantified uncertainty, alongside a similar product functionality score, to aid decisions between alternative products. The scoring method uses Clean Production Action's GreenScreen as a guide, but with a different method of score aggregation. It provides finer differentiation between scores than GreenScreen's four-point scale, and it displays uncertainty quantitatively in the final score. Displaying uncertainty also illustrates which alternatives are early in product development versus well-defined commercial products. This paper tested the proposed assessment method through a case study in the building industry, assessing alternatives to spray polyurethane foam insulation containing methylene diphenyl diisocyanate (MDI). The new hazard scoring method successfully identified trade-offs between different alternatives, showing finer resolution than GreenScreen Benchmarking. Sensitivity analysis showed that different weighting schemes in hazard scores had almost no effect on alternatives ranking, compared to uncertainty from data gaps. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of a risk-ranking framework to evaluate potential high-threat microorganisms, toxins, and chemicals in food.

PubMed

Newsome, R; Tran, N; Paoli, G M; Jaykus, L A; Tompkin, B; Miliotis, M; Ruthman, T; Hartnett, E; Busta, F F; Petersen, B; Shank, F; McEntire, J; Hotchkiss, J; Wagner, M; Schaffner, D W

2009-03-01

Through a cooperative agreement with the U.S. Food and Drug Administration, the Institute of Food Technologists developed a risk-ranking framework prototype to enable comparison of microbiological and chemical hazards in foods and to assist policy makers, risk managers, risk analysts, and others in determining the relative public health impact of specific hazard-food combinations. The prototype is a bottom-up system based on assumptions that incorporate expert opinion/insight with a number of exposure and hazard-related risk criteria variables, which are propagated forward with food intake data to produce risk-ranking determinations. The prototype produces a semi-quantitative comparative assessment of food safety hazards and the impacts of hazard control measures. For a specific hazard-food combination the prototype can produce a single metric: a final risk value expressed as annual pseudo-disability adjusted life years (pDALY). The pDALY is a harmonization of the very different dose-response relationships observed for chemicals and microbes. The prototype was developed on 2 platforms, a web-based user interface and an Analytica(R) model (Lumina Decision Systems, Los Gatos, Calif., U.S.A.). Comprising visual basic language, the web-based platform facilitates data input and allows use concurrently from multiple locations. The Analytica model facilitates visualization of the logic flow, interrelationship of input and output variables, and calculations/algorithms comprising the prototype. A variety of sortable risk-ranking reports and summary information can be generated for hazard-food pairs, showing hazard and dose-response assumptions and data, per capita consumption by population group, and annual p-DALY.

The Spatial Assessment of the Current Seismic Hazard State for Hard Rock Underground Mines

NASA Astrophysics Data System (ADS)

Wesseloo, Johan

2018-06-01

Mining-induced seismic hazard assessment is an important component in the management of safety and financial risk in mines. As the seismic hazard is a response to the mining activity, it is non-stationary and variable both in space and time. This paper presents an approach for implementing a probabilistic seismic hazard assessment to assess the current hazard state of a mine. Each of the components of the probabilistic seismic hazard assessment is considered within the context of hard rock underground mines. The focus of this paper is the assessment of the in-mine hazard distribution and does not consider the hazard to nearby public or structures. A rating system and methodologies to present hazard maps, for the purpose of communicating to different stakeholders in the mine, i.e. mine managers, technical personnel and the work force, are developed. The approach allows one to update the assessment with relative ease and within short time periods as new data become available, enabling the monitoring of the spatial and temporal change in the seismic hazard.

Validation of an in situ solidification/stabilization technique for hazardous barium and cyanide waste for safe disposal into a secured landfill.

PubMed

Vaidya, Rucha; Kodam, Kisan; Ghole, Vikram; Surya Mohan Rao, K

2010-09-01

The aim of the present study was to devise and validate an appropriate treatment process for disposal of hazardous barium and cyanide waste into a landfill at a Common Hazardous Waste Treatment Storage Disposal Facility (CHWTSDF). The waste was generated during the process of hardening of steel components and contains cyanide (reactive) and barium (toxic) as major contaminants. In the present study chemical fixation of the contaminants was carried out. The cyanide was treated by alkali chlorination with calcium hypochlorite and barium by precipitation with sodium sulfate as barium sulfate. The pretreated mixture was then solidified and stabilized by binding with a combination of slag cement, ordinary Portland cement and fly ash, molded into blocks (5 x 5 x 5 cm) and cured for a period of 3, 7 and 28 days. The final experiments were conducted with 18 recipe mixtures of waste + additive:binder (W:B) ratios. The W:B ratios were taken as 80:20, 70:30 and 50:50. The optimum proportions of additives and binders were finalized on the basis of the criteria of unconfined compressive strength and leachability. The leachability studies were conducted using the Toxicity Characteristic Leaching Procedure. The blocks were analyzed for various physical and leachable chemical parameters at the end of each curing period. Based on the results of the analysis, two recipe mixtures, with compositions - 50% of [waste + (120 g Ca(OCl)(2) + 290 g Na(2)SO(4)) kg(-1) of waste] + 50% of binders, were validated for in situ stabilization into a secured landfill of CHWTSDF. 2010 Elsevier Ltd. All rights reserved.

16 CFR § 1500.231 - Guidance for hazardous liquid chemicals in children's products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... poisoning from ingestion of the chemicals, pneumonia from aspiration of the chemicals into the lungs, and... poisoning and/or chemical pneumonia from aspiration. This determination resulted in recalls or in the...

40 CFR 373.3 - Content of notice.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COMMUNITY RIGHT-TO-KNOW PROGRAMS REPORTING HAZARDOUS SUBSTANCE ACTIVITY WHEN SELLING OR TRANSFERRING FEDERAL... information: (a) The name of the hazardous substance; the Chemical Abstracts Services Registry Number (CASRN) where applicable; the regulatory synonym for the hazardous substance, as listed in 40 CFR 302.4, where...

40 CFR 68.50 - Hazard review.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 16 2014-07-01 2014-07-01 false Hazard review. 68.50 Section 68.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 2 Prevention Program § 68.50 Hazard review. (a) The owner or...

40 CFR 68.50 - Hazard review.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 16 2013-07-01 2013-07-01 false Hazard review. 68.50 Section 68.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 2 Prevention Program § 68.50 Hazard review. (a) The owner or...

40 CFR 68.50 - Hazard review.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 15 2011-07-01 2011-07-01 false Hazard review. 68.50 Section 68.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 2 Prevention Program § 68.50 Hazard review. (a) The owner or...

40 CFR 68.50 - Hazard review.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 16 2012-07-01 2012-07-01 false Hazard review. 68.50 Section 68.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 2 Prevention Program § 68.50 Hazard review. (a) The owner or...

Persistent, Bioaccumulative, and Toxic (PBT) Chemicals under TSCA Section 6(h)

EPA Pesticide Factsheets

EPA's existing chemicals programs address pollution prevention, risk assessment, hazard and exposure assessment and/or characterization, and risk management for chemicals substances in commercial use.

Safety in the SEM laboratory--1981 update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bance, G.N.; Barber, V.C.; Sholdice, J.A.

1981-01-01

The article reviews recent information on hazards as they relate to safety in SEM laboratories. The first section lists the safety equipment that should be available in a SEM laboratory. Flammable and combustible liquids are discussed, and particular warnings are given concerning the fire and explosion risks associated with diethyl ether and diisopropyl ether. The possible hazards associated with electrical equipment, and the risk of X-ray emissions from EM's are briefly outlined. The hazards associated with acute and chronic toxicity of chemicals used in the EM laboratory are discussed. The need to reduce exposure to a growing list of recognizablemore » hazardous chemicals is emphasized. This reduction can be accomplished by more extensive use of functioning fume hoods, and the use of more appropriate and effective protective gloves. Allergies and the hazards of dangerous pathogens in the SEM laboratory are discussed. The explosion and other hazards associated with cryogens, vacuum evaporators, critical point dryers, and compressed gas cylinders are emphasized.« less

The OSHA hazardous chemical occupational exposure standard for laboratories.

PubMed

Armbruster, D A

1991-01-01

OSHA's chemical occupational exposure standard for laboratories is an outgrowth of the previously issued Hazard Communication Standard. The standard relieves laboratories from complying with general industry standards but does require compliance with specific laboratory guidelines. The heart of the standard is the creation of a Chemical Hygiene Plan (CHP). The CHP addresses major issues such as safety equipment and procedures, work practices, training, the designation of a chemical hygiene officer, and the provision of medical consultation and examination for affected employees. This new standard, in full effect as of January 31, 1991, presents yet another regulatory challenge to laboratory managers but also ensures a safer environment for laboratory workers.

Preharvest food safety.

PubMed

Childers, A B; Walsh, B

1996-07-23

Preharvest food safety is essential for the protection of our food supply. The production and transport of livestock and poultry play an integral part in the safety of these food products. The goals of this safety assurance include freedom from pathogenic microorganisms, disease, and parasites, and from potentially harmful residues and physical hazards. Its functions should be based on hazard analysis and critical control points from producer to slaughter plant with emphasis on prevention of identifiable hazards rather than on removal of contaminated products. The production goal is to minimize infection and insure freedom from potentially harmful residues and physical hazards. The marketing goal is control of exposure to pathogens and stress. Both groups should have functional hazard analysis and critical control points management programs which include personnel training and certification of producers. These programs must cover production procedures, chemical usage, feeding, treatment practices, drug usage, assembly and transportation, and animal identification. Plans must use risk assessment principles, and the procedures must be defined. Other elements would include preslaughter certification, environmental protection, control of chemical hazards, live-animal drug-testing procedures, and identification of physical hazards.

Multidimensional In Vivo Hazard Assessment Using Zebrafish

PubMed Central

Tanguay, Robert L.

2014-01-01

There are tens of thousands of man-made chemicals in the environment; the inherent safety of most of these chemicals is not known. Relevant biological platforms and new computational tools are needed to prioritize testing of chemicals with limited human health hazard information. We describe an experimental design for high-throughput characterization of multidimensional in vivo effects with the power to evaluate trends relating to commonly cited chemical predictors. We evaluated all 1060 unique U.S. EPA ToxCast phase 1 and 2 compounds using the embryonic zebrafish and found that 487 induced significant adverse biological responses. The utilization of 18 simultaneously measured endpoints means that the entire system serves as a robust biological sensor for chemical hazard. The experimental design enabled us to describe global patterns of variation across tested compounds, evaluate the concordance of the available in vitro and in vivo phase 1 data with this study, highlight specific mechanisms/value-added/novel biology related to notochord development, and demonstrate that the developmental zebrafish detects adverse responses that would be missed by less comprehensive testing strategies. PMID:24136191

[Information content of immunologic parameters in the evaluation of the effects of hazardous substances].

PubMed

Litovskaia, A V; Sadovskiĭ, V V; Vifleemskiĭ, A B

1995-01-01

Clinical and immunologic examination including 1 and 2 level tests covered 429 staffers of chemical enterprises and 1122 of those engaged into microbiological synthesis of proteins, both the groups exposed to some irritating gases and isocyanates. Using calculation of Kulbak's criterion, the studies selected informative parameters to diagnose immune disturbances caused by occupational hazards. For integral evaluation of immune state, the authors applied general immunologic parameter, meanings of which can serve as criteria for early diagnosis of various immune disorders and for definition of risk groups among industrial workers exposed to occupational biologic and chemical hazards.

CHANGES SDSS: the development of a Spatial Decision Support System for analysing changing hydro-meteorological risk

NASA Astrophysics Data System (ADS)

van Westen, Cees; Bakker, Wim; Zhang, Kaixi; Jäger, Stefan; Assmann, Andre; Kass, Steve; Andrejchenko, Vera; Olyazadeh, Roya; Berlin, Julian; Cristal, Irina

2014-05-01

Within the framework of the EU FP7 Marie Curie Project CHANGES (www.changes-itn.eu) and the EU FP7 Copernicus project INCREO (http://www.increo-fp7.eu) a spatial decision support system is under development with the aim to analyse the effect of risk reduction planning alternatives on reducing the risk now and in the future, and support decision makers in selecting the best alternatives. The Spatial Decision Support System will be composed of a number of integrated components. The Risk Assessment component allows to carry out spatial risk analysis, with different degrees of complexity, ranging from simple exposure (overlay of hazard and assets maps) to quantitative analysis (using different hazard types, temporal scenarios and vulnerability curves) resulting into risk curves. The platform does not include a component to calculate hazard maps, and existing hazard maps are used as input data for the risk component. The second component of the SDSS is a risk reduction planning component, which forms the core of the platform. This component includes the definition of risk reduction alternatives (related to disaster response planning, risk reduction measures and spatial planning) and links back to the risk assessment module to calculate the new level of risk if the measure is implemented, and a cost-benefit (or cost-effectiveness/ Spatial Multi Criteria Evaluation) component to compare the alternatives and make decision on the optimal one. The third component of the SDSS is a temporal scenario component, which allows to define future scenarios in terms of climate change, land use change and population change, and the time periods for which these scenarios will be made. The component doesn't generate these scenarios but uses input maps for the effect of the scenarios on the hazard and assets maps. The last component is a communication and visualization component, which can compare scenarios and alternatives, not only in the form of maps, but also in other forms (risk curves, tables, graphs). The envisaged users of the platform are organizations involved in planning of risk reduction measures, and that have staff capable of visualizing and analysing spatial data at a municipal scale.

Demographic determinants of chemical safety information recall in workers and consumers in South Africa: A cross sectional study.

PubMed

Sathar, Farzana; Dalvie, Mohamed Aqiel; Rother, Hanna-Andrea; London, Leslie

2017-12-01

Chemical hazard communication is intended to alert users of the potential hazards of chemicals. Hazard information needs to be understood and recalled. Recall of hazard communication is critical when the written form of the information is not available at the time it is required. A cross-sectional study investigating associations between recall of chemical safety information on labels amongst 402 participants including 315 workers and 87 consumers in two provinces of South Africa. Respondents were predominantly male (67.7%), the median age was 37 years (IQR: 30-46years) and less than half of the participants completed high school (47.5%). Multivariate analysis identified the following positive associations with the recall of all the label elements listing the strongest association: call appropriate services and industrial vs consumer sector (OR=2.4; 95% CI: 1.2; 4.6 ); call appropriate services and transport vs consumer sector (OR=4.4; 95% CI: 1.2; 16.0); flammable symbol and male vs female gender (OR=2.3; 95% CI: 1.0; 5.3); flammable symbol and home language English vs African languages (OR=6.6; 95% CI: 2.1; 21.2); any hazard statement and home language Afrikaans vs African languages (OR=14.0; 95% CI: 3.6; 54.2), any first aid statement and further education vs none (OR=3.3; 95% CI: 1.3; 8.0), correct chemical name and industry blue collar workers vs non-industry blue collar workers (OR=2.6; 95% CI: 1.1; 6.1), correct chemical name and non-industry white collar occupations vs non-industry blue collar workers (OR=2.7; 95% CI: 1.0; 7.1). The study found a number of potential positive associations which influence recall of label elements of which some (e.g., sector, gender, occupation) suggest further research. Relevant policies in South Africa should ensure that the safety information on chemical labels is clearly visible to read and understandable which aids recall and the reduction in harmful chemical exposures. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Arsenic and heavy metals contamination, risk assessment and their source in drinking water of the Mardan District, Khyber Pakhtunkhwa, Pakistan.

PubMed

Gul, Nida; Shah, Mohammad Tahir; Khan, Sardar; Khattak, Nimat Ullah; Muhammad, Said

2015-12-01

The present study was conducted to investigate the physico-chemical characteristics in drinking water of Mardan District, Pakistan. Furthermore, water quality was evaluated for the risk assessment of arsenic and heavy metals (HMs) and their contamination sources. Representative groundwater samples of shallow and deep sources were collected in the study area. These samples were analyzed for physical parameters, anions, light metals (LMs) and HMs. Results were compared with the drinking water guideline values set by the World Health Organization and the US Environmental Protection Agency. Average concentrations of anions, LMs and HMs were found within the maximum allowable contaminant levels except for bicarbonates, Fe, Cu, and Pb. Results revealed that hazard quotients >1 were observed for shallow groundwater for 10% samples only, suggesting potential health risk from water consumption. Correlation analysis and principal component analysis showed a relationship among various physico-chemical parameters in both shallow and deep groundwater. Statistical analyses suggested the geogenic and anthropogenic sources for possible enhancement of various physico-chemical parameters in the aquifer system of the study area.

Toxicology in Australia: a key component of environmental health.

PubMed

Priestly, Brian G; Di Marco, Peter; Sim, Malcolm; Moore, Michael R; Langley, Andrew

2007-10-01

Managing public concerns relating to chemical exposures can consume substantial public health resources, particularly as the scientific basis around these issues is often contentious. Toxicology remains underrecognized as a public health discipline in Australia, although Australian toxicologists are making significant contributions from academia, government, and the commercial sector toward assessing the level of risk and protecting the community from environmental hazards. Internationally, the growth of environmental toxicology and the promotion of sound science in risk assessment as a basis for making regulatory decisions have been, to some extent, driven by the outcomes of the 1992 UNCED Conference on Sustainable Development (Rio Summit) and its Chapter 19 Agenda 21 activities. The promotion of safe chemical management practices and the need for global strengthening of capabilities in toxicology are among the initiatives of the Intergovernmental Forum on Chemical Safety (IFCS), which was formed after the Rio Summit to manage these programs. This article describes some of the initiatives in capacity building that marked the development of environmental toxicology in Australia since 1992 in response to these international environmental health initiatives.

Advances in Raman spectroscopy for explosive identification in aviation security

NASA Astrophysics Data System (ADS)

Santillán, Javier D.; Brown, Christopher D.; Jalenak, Wayne

2007-04-01

In the operational airport environment, the rapid identification of potentially hazardous materials such as improvised explosive devices, chemical warfare agents and flammable and explosive liquids is increasingly critical. Peroxide-based explosives pose a particularly insidious threat because they can be made from commonly available and relatively innocuous household chemicals, such as bleach and hydrogen peroxide. Raman spectroscopy has been validated as a valuable tool for rapid identification of chemicals, explosives, and narcotics and their precursors while allowing "line-of-sight" interrogation through bottles or other translucent containers. This enables safe identification of both precursor substances, such as acetone, and end-products, such as TATP, without direct sampling, contamination and exposure by security personnel. To date, Raman systems have been laboratory-based, requiring careful operation and maintenance by technology experts. The capital and ongoing expenses of these systems is also significant. Recent advances in Raman component technologies have dramatically reduced the footprint and cost, while improving the reliability and ease of use of Raman spectroscopy systems. Such technologies are not only bringing the lab to the field, but are also protecting civilians and security personnel in the process.

Where the chips fall: environmental health in the semiconductor industry.

PubMed

Chepesiuk, R

1999-09-01

Three recent lawsuits are focusing public attention on the environmental and occupational health effects of the world's largest and fastest growing manufacturing sector-the $150 billion semiconductor industry. The suits allege that exposure to toxic chemicals in semiconductor manufacturing plants led to adverse health effects such as miscarriage and cancer among workers. To manufacture computer components, the semiconductor industry uses large amounts of hazardous chemicals including hydrochloric acid, toxic metals and gases, and volatile solvents. Little is known about the long-term health consequences of exposure to chemicals by semiconductor workers. According to industry critics, the semiconductor industry also adversely impacts the environment, causing groundwater and air pollution and generating toxic waste as a by-product of the semiconductor manufacturing process. In contrast, the U.S. Bureau of Statistics shows the semiconductor industry as having a worker illness rate of about one-third of the average of all manufacturers, and advocates defend the industry, pointing to recent research collaborations and product replacement as proof that semiconductor manufacturers adequately protect both their employees and the environment.

Where the chips fall: environmental health in the semiconductor industry.

PubMed Central

Chepesiuk, R

1999-01-01

Three recent lawsuits are focusing public attention on the environmental and occupational health effects of the world's largest and fastest growing manufacturing sector-the $150 billion semiconductor industry. The suits allege that exposure to toxic chemicals in semiconductor manufacturing plants led to adverse health effects such as miscarriage and cancer among workers. To manufacture computer components, the semiconductor industry uses large amounts of hazardous chemicals including hydrochloric acid, toxic metals and gases, and volatile solvents. Little is known about the long-term health consequences of exposure to chemicals by semiconductor workers. According to industry critics, the semiconductor industry also adversely impacts the environment, causing groundwater and air pollution and generating toxic waste as a by-product of the semiconductor manufacturing process. In contrast, the U.S. Bureau of Statistics shows the semiconductor industry as having a worker illness rate of about one-third of the average of all manufacturers, and advocates defend the industry, pointing to recent research collaborations and product replacement as proof that semiconductor manufacturers adequately protect both their employees and the environment. PMID:10464084

Integrated Risk Index of Chemical Aquatic Pollution (IRICAP): case studies in Iberian rivers.

PubMed

Fàbrega, Francesc; Marquès, Montse; Ginebreda, Antoni; Kuzmanovic, Maja; Barceló, Damià; Schuhmacher, Marta; Domingo, José L; Nadal, Martí

2013-12-15

The hazard of chemical compounds can be prioritized according to their PBT (persistence, bioaccumulation, toxicity) properties by using Self-Organizing Maps (SOM). The objective of the present study was to develop an Integrated Risk Index of Chemical Aquatic Pollution (IRICAP), useful to evaluate the risk associated to the exposure of chemical mixtures contained in river waters. Four Spanish river basins were considered as case-studies: Llobregat, Ebro, Jucar and Guadalquivir. A SOM-based hazard index (HI) was estimated for 205 organic compounds. IRICAP was calculated as the product of the HI by the concentration of each pollutant, and the results of all substances were aggregated. Finally, Pareto distribution was applied to the ranked lists of compounds in each site to prioritize those chemicals with the most significant incidence on the IRICAP. According to the HI outcomes, perfluoroalkyl substances, as well as specific illicit drugs and UV filters, were among the most hazardous compounds. Xylazine was identified as one of the chemicals with the highest contribution to the total IRICAP value in the different river basins, together with other pharmaceutical products such as loratadine and azaperol. These organic compounds should be proposed as target chemicals in the implementation of monitoring programs by regulatory organizations. Copyright © 2013 Elsevier B.V. All rights reserved.

Evaluating the Effects of Chemicals on Nervous System Development

EPA Pesticide Factsheets

There are thousands of chemicals that lack data on their potential effects on neurodevelopment. EPA is developing New Approach Methods to evaluate these chemicals for developmental neurotoxicity hazard.

How developing nations can protect children from hazardous chemical exposures while sustaining economic growth.

PubMed

Trasande, Leonardo; Massey, Rachel I; DiGangi, Joseph; Geiser, Kenneth; Olanipekun, Abiola Ifueko; Gallagher, Louise

2011-12-01

Increasing worldwide use of chemicals, including heavy metals used in industry and pesticides used in agriculture, may produce increases in chronic diseases in children unless steps are taken to manage the production, use, trade, and disposal of chemicals. In 2020 the developing world will account for 33 percent of global chemical demand and 31 percent of production, compared with 23 percent and 21 percent, respectively, in 1995. We describe present and potential costs of environmental exposures and discuss policy options to protect future generations of children in a sustainable development context. Specifically, we describe the principles of sound chemicals management, as follows: precaution, or the use of cost-effective measures to prevent potentially hazardous exposures before scientific understanding is complete; the right to know, or informing the public--especially vulnerable groups--in a timely fashion about the safe use of chemicals and any releases of chemicals into the environment; pollution prevention, or preventing the use of hazardous chemicals and the production of pollutants, rather than focusing on managing wastes; internalization of environmental and health costs, or ensuring that the consequences of exposures are reflected in the price of chemicals through such approaches as "polluter pays"; and use of best available scientific information in making decisions such as what chemicals to allow into the market. We recommend that industrializing nations in particular employ these principles to prevent disease among their populations while at the same time minimizing the risk to their own economic development.