Heat gain from thermal radiation through protective clothing with different insulation, reflectivity and vapour permeability.

PubMed

Bröde, Peter; Kuklane, Kalev; Candas, Victor; Den Hartog, Emiel A; Griefahn, Barbara; Holmér, Ingvar; Meinander, Harriet; Nocker, Wolfgang; Richards, Mark; Havenith, George

2010-01-01

The heat transferred through protective clothing under long wave radiation compared to a reference condition without radiant stress was determined in thermal manikin experiments. The influence of clothing insulation and reflectivity, and the interaction with wind and wet underclothing were considered. Garments with different outer materials and colours and additionally an aluminised reflective suit were combined with different number and types of dry and pre-wetted underwear layers. Under radiant stress, whole body heat loss decreased, i.e., heat gain occurred compared to the reference. This heat gain increased with radiation intensity, and decreased with air velocity and clothing insulation. Except for the reflective outer layer that showed only minimal heat gain over the whole range of radiation intensities, the influence of the outer garments' material and colour was small with dry clothing. Wetting the underclothing for simulating sweat accumulation, however, caused differing effects with higher heat gain in less permeable garments.

Thermal comfort sustained by cold protective clothing in Arctic open-pit mining—a thermal manikin and questionnaire study

PubMed Central

JUSSILA, Kirsi; RISSANEN, Sirkka; AMINOFF, Anna; WAHLSTRÖM, Jens; VAKTSKJOLD, Arild; TALYKOVA, Ljudmila; REMES, Jouko; MÄNTTÄRI, Satu; RINTAMÄKI, Hannu

2017-01-01

Workers in the Arctic open-pit mines are exposed to harsh weather conditions. Employers are required to provide protective clothing for workers. This can be the outer layer, but sometimes also inner or middle layers are provided. This study aimed to determine how Arctic open-pit miners protect themselves against cold and the sufficiency, and the selection criteria of the garments. Workers’ cold experiences and the clothing in four Arctic open-pit mines in Finland, Sweden, Norway and Russia were evaluated by a questionnaire (n=1,323). Basic thermal insulation (Icl) of the reported clothing was estimated (ISO 9920). The Icl of clothing from the mines were also measured by thermal manikin (standing/walking) in 0.3 and 4.0 m/s wind. The questionnaire showed that the Icl of the selected clothing was on average 1.2 and 1.5 clo in mild (−5 to +5°C) and dry cold (−20 to −10°C) conditions, respectively. The Icl of the clothing measured by thermal manikin was 1.9–2.3 clo. The results show that the Arctic open-pit miners’ selected their clothing based on occupational (time outdoors), environmental (temperature, wind, moisture) and individual factors (cold sensitivity, general health). However, the selected clothing was not sufficient to prevent cooling completely at ambient temperatures below −10°C. PMID:29021416

Thermal comfort sustained by cold protective clothing in Arctic open-pit mining-a thermal manikin and questionnaire study.

PubMed

Jussila, Kirsi; Rissanen, Sirkka; Aminoff, Anna; Wahlström, Jens; Vaktskjold, Arild; Talykova, Ljudmila; Remes, Jouko; Mänttäri, Satu; Rintamäki, Hannu

2017-12-07

Workers in the Arctic open-pit mines are exposed to harsh weather conditions. Employers are required to provide protective clothing for workers. This can be the outer layer, but sometimes also inner or middle layers are provided. This study aimed to determine how Arctic open-pit miners protect themselves against cold and the sufficiency, and the selection criteria of the garments. Workers' cold experiences and the clothing in four Arctic open-pit mines in Finland, Sweden, Norway and Russia were evaluated by a questionnaire (n=1,323). Basic thermal insulation (I cl ) of the reported clothing was estimated (ISO 9920). The I cl of clothing from the mines were also measured by thermal manikin (standing/walking) in 0.3 and 4.0 m/s wind. The questionnaire showed that the I cl of the selected clothing was on average 1.2 and 1.5 clo in mild (-5 to +5°C) and dry cold (-20 to -10°C) conditions, respectively. The I cl of the clothing measured by thermal manikin was 1.9-2.3 clo. The results show that the Arctic open-pit miners' selected their clothing based on occupational (time outdoors), environmental (temperature, wind, moisture) and individual factors (cold sensitivity, general health). However, the selected clothing was not sufficient to prevent cooling completely at ambient temperatures below -10°C.

Frostbite

MedlinePlus

... to frostbite. These include extreme: Wet clothes High winds Poor blood circulation. Poor circulation can be caused ... areas. In cold weather, wear mittens (not gloves); wind-proof, water-resistant, layered clothing; 2 pairs of ...

Advanced modelling of the transport phenomena across horizontal clothing microclimates with natural convection.

PubMed

Mayor, T S; Couto, S; Psikuta, A; Rossi, R M

2015-12-01

The ability of clothing to provide protection against external environments is critical for wearer's safety and thermal comfort. It is a function of several factors, such as external environmental conditions, clothing properties and activity level. These factors determine the characteristics of the different microclimates existing inside the clothing which, ultimately, have a key role in the transport processes occurring across clothing. As an effort to understand the effect of transport phenomena in clothing microclimates on the overall heat transport across clothing structures, a numerical approach was used to study the buoyancy-driven heat transfer across horizontal air layers trapped inside air impermeable clothing. The study included both the internal flow occurring inside the microclimate and the external flow occurring outside the clothing layer, in order to analyze the interdependency of these flows in the way heat is transported to/from the body. Two-dimensional simulations were conducted considering different values of microclimate thickness (8, 25 and 52 mm), external air temperature (10, 20 and 30 °C), external air velocity (0.5, 1 and 3 m s(-1)) and emissivity of the clothing inner surface (0.05 and 0.95), which implied Rayleigh numbers in the microclimate spanning 4 orders of magnitude (9 × 10(2)-3 × 10(5)). The convective heat transfer coefficients obtained along the clothing were found to strongly depend on the transport phenomena in the microclimate, in particular when natural convection is the most important transport mechanism. In such scenario, convective coefficients were found to vary in wavy-like manner, depending on the position of the flow vortices in the microclimate. These observations clearly differ from data in the literature for the case of air flow over flat-heated surfaces with constant temperature (which shows monotonic variations of the convective heat transfer coefficients, along the length of the surface). The flow patterns and temperature fields in the microclimates were found to strongly depend on the characteristics of the external boundary layer forming along the clothing and on the distribution of temperature in the clothing. The local heat transfer rates obtained in the microclimate are in marked contrast with those found in the literature for enclosures with constant-temperature active walls. These results stress the importance of coupling the calculation of the internal and the external flows and of the heat transfer convective and radiative components, when analyzing the way heat is transported to/from the body.

Effect of body mass and clothing on carrion entomofauna.

PubMed

Matuszewski, Szymon; Frątczak, Katarzyna; Konwerski, Szymon; Bajerlein, Daria; Szpila, Krzysztof; Jarmusz, Mateusz; Szafałowicz, Michał; Grzywacz, Andrzej; Mądra, Anna

2016-01-01

Carcass mass largely affects pattern and rate of carrion decomposition. Supposedly, it is similarly important for carrion entomofauna; however, most of its likely effects have not been tested experimentally. Here, simultaneous effects of carcass mass and clothing are analyzed. A factorial block experiment with four levels of carcass mass (small carcasses 5-15 kg, medium carcasses 15.1-30 kg, medium/large carcasses 35-50 kg, large carcasses 55-70 kg) and two levels of carcass clothing (clothed and unclothed) was made in a grassland habitat of Western Poland. Pig carcasses (N = 24) were grouped into spring, early summer, and late summer blocks. Insects were sampled manually and with pitfall traps. Results demonstrate that insect assemblages are more complex, abundant, and long-lasting on larger carcasses, whereas clothing is of minor importance in this respect. Only large or medium/large carcasses were colonized by all guilds of carrion insects, while small or medium carcasses revealed high underrepresentation of late-colonizing insects (e.g., Cleridae or Nitidulidae). This finding indicates that carcasses weighing about 23 kg-a standard in forensic decomposition studies-give an incomplete picture of carrion entomofauna. Residencies of all forensically relevant insects were distinctly prolonged on larger carcasses, indicating that cadaver mass is a factor of great importance in this respect. The pre-appearance interval of most taxa was found to be unrelated to mass or clothing of a carcass. Moreover, current results suggest that rate of larval development is higher on smaller carcasses. In conclusion, this study demonstrates that carcass mass is a factor of crucial importance for carrion entomofauna, whereas the importance of clothing is small.

Localised boundary air layer and clothing evaporative resistances for individual body segments.

PubMed

Wang, Faming; del Ferraro, Simona; Lin, Li-Yen; Sotto Mayor, Tiago; Molinaro, Vincenzo; Ribeiro, Miguel; Gao, Chuansi; Kuklane, Kalev; Holmér, Ingvar

2012-01-01

Evaporative resistance is an important parameter to characterise clothing thermal comfort. However, previous work has focused mainly on either total static or dynamic evaporative resistance. There is a lack of investigation of localised clothing evaporative resistance. The objective of this study was to study localised evaporative resistance using sweating thermal manikins. The individual and interaction effects of air and body movements on localised resultant evaporative resistance were examined in a strict protocol. The boundary air layer's localised evaporative resistance was investigated on nude sweating manikins at three different air velocity levels (0.18, 0.48 and 0.78 m/s) and three different walking speeds (0, 0.96 and 1.17 m/s). Similarly, localised clothing evaporative resistance was measured on sweating manikins at three different air velocities (0.13, 0.48 and 0.70 m/s) and three walking speeds (0, 0.96 and 1.17 m/s). Results showed that the wind speed has distinct effects on local body segments. In contrast, walking speed brought much more effect on the limbs, such as thigh and forearm, than on body torso, such as back and waist. In addition, the combined effect of body and air movement on localised evaporative resistance demonstrated that the walking effect has more influence on the extremities than on the torso. Therefore, localised evaporative resistance values should be provided when reporting test results in order to clearly describe clothing local moisture transfer characteristics. Localised boundary air layer and clothing evaporative resistances are essential data for clothing design and assessment of thermal comfort. A comprehensive understanding of the effects of air and body movement on localised evaporative resistance is also necessary by both textile and apparel researchers and industry.

Evolution of fracture and fault-controlled fluid pathways in carbonates of the Albanides fold-thrust belt

USGS Publications Warehouse

Graham, Wall B.R.; Girbacea, R.; Mesonjesi, A.; Aydin, A.

2006-01-01

The process of fracture and fault formation in carbonates of the Albanides fold-thrust belt has been systematically documented using hierarchical development of structural elements from hand sample, outcrop, and geologic-map scales. The function of fractures and faults in fluid migration was elucidated using calcite cement and bitumen in these structures as a paleoflow indicator. Two prefolding pressure-solution and vein assemblages were identified: an overburden assemblage and a remote tectonic stress assemblage. Sheared layer-parallel pressure-solution surfaces of the overburden assemblage define mechanical layers. Shearing of mechanical layers associated with folding resulted in the formation of a series of folding assemblage fractures at different orientations, depending on the slip direction of individual mechanical layers. Prefolding- and folding-related fracture assemblages together formed fragmentation zones in mechanical layers and are the sites of incipient fault localization. Further deformation along these sites was accommodated by rotation and translation of fragmented rock, which formed breccia and facilitated fault offset across multiple mechanical layers. Strike-slip faults formed by this process are organized in two sets in an apparent conjugate pattern. Calcite cement and bitumen that accumulated along fractures and faults are evidence of localized fluid flow along fault zones. By systematic identification of fractures and faults, their evolution, and their fluid and bitumen contents, along with subsurface core and well-log data, we identify northeast-southwest-trending strike-slip faults and the associated structures as dominant fluid pathways in the Albanides fold-thrust belt. Copyright ?? 2006. The American Association of Petroleum Geologists. All rights reserved.

Preparation and uses of amorphous boron carbide coated substrates

DOEpatents

Riley, Robert E.; Newkirk, Lawrence R.; Valencia, Flavio A.

1981-09-01

Cloth is coated at a temperature below about 1000.degree. C. with amorphous boron-carbon deposits in a process which provides a substantially uniform coating on all the filaments making up each yarn fiber bundle of the cloth. The coated cloths can be used in the as-deposited condition for example as wear surfaces where high hardness values are needed; or multiple layers of coated cloths can be hot-pressed to form billets useful for example in fusion reactor wall armor. Also provided is a method of controlling the atom ratio of B:C of boron-carbon deposits onto any of a variety of substrates, including cloths.

Preparation and uses of amorphous boron carbide coated substrates

DOEpatents

Riley, R.E.; Newkirk, L.R.; Valencia, F.A.; Wallace, T.C.

1979-12-05

Cloth is coated at a temperature below about 1000/sup 0/C with amorphous boron-carbon deposits in a process which provides a substantially uniform coating on all the filaments making up each yarn fiber bundle of the cloth. The coated cloths can be used in the as-deposited condition for example as wear surfaces where high hardness values are needed; or multiple layers of coated cloths can be hot-pressed to form billets useful for example in fusion reactor wall armor. Also provided is a method of controlling the atom ratio of B:C of boron-carbon deposits onto any of a variety of substrates, including cloths.

Carbon cloth supported electrode

DOEpatents

Lu, Wen-Tong P.; Ammon, Robert L.

1982-01-01

A flow-by anode is disclosed made by preparing a liquid suspension of about to about 18% by weight solids, the solids comprising about 3.5 to about 8% of a powdered catalyst of platinum, palladium, palladium oxide, or mixtures thereof; about 60 to about 76% carbon powder (support) having a particle size less than about 20 m.mu.m and about 20 to about 33% of an inert binder having a particle size of less than about 500 m.mu.m. A sufficient amount of the suspension is poured over a carbon cloth to form a layer of solids about 0.01 to about 0.05 cm thick on the carbon cloth when the electrode is completed. A vacuum was applied to the opposite side of the carbon cloth to remove the liquid and the catalyst layer/cloth assembly is dried and compressed at about 10 to about 50 MPa's. The binder is then sintered in an inert atmosphere to complete the electrode. The electrode is used for the oxidation of sulfur dioxide in a sulfur based hybrid cycle for the decomposition of water.

Effects of two kinds of underwear on thermophysiological responses and clothing microclimate during 30 min walking and 60 min recovery in the cold.

PubMed

Ha, M; Tokura, H; Tanaka, Y; Holmér, I

1996-01-01

Thermophysiological responses and clothing microclimate under the influences of different underwear materials were compared during walking and recovery in the cold. Two kinds of underwear were used: two layers of cotton underwear with two-piece long-sleeved shirt and long-legged trousers (C), two layers of polypropylene underwear with two-piece long-sleeved shirt and long-legged trousers (P). In addition, the subject put on a two-piece ski suit of 100% polyester including 100% polyester padding. Seven adult females served as subjects in this study. The test was done in a climatic chamber at an ambient air temperature of 2 degrees C, a relative humidity of 65% and an air velocity of 0.14 m.s-1. The subject walked on a motor-driven treadmill with a 6 km/h speed for 30 min followed by 60 min recovery. Rectal temperature, skin temperatures, clothing microclimate (temperature, humidity), metabolic heat production and heart rate were measured. Furthermore, subjective ratings on thermal sensation, sweating/shivering sensation, clothing wettedness sensation and skin wettedness sensation for whole body were asked. The major findings are summarized as follows: 1) Mean skin temperature was not significantly different during walking, but it was significantly higher in P than in C during the recovery. 2) The absolute humidity of innermost layer and outermost layer were not significantly different during walking, but it was significantly higher in P than in C during the recovery. 3) Clothing microclimate temperature of innermost was not significantly different during the first half of walking, but it was significantly higher in C than in P during the second half of walking and significantly lower in C than in P during the recovery. Clothing microclimate temperature of outermost was not significantly different during walking, but it was significantly higher in P than in C during the recovery. 4) Metabolic heat production for the last 10 min during recovery tended to be higher in P. 5) The degree of skin wettedness sensation and clothing wettedness sensation for whole body was significantly higher in P during walking and recovery. Thus, it was concluded that two kinds of underwear with different properties to moisture could influence, not only clothing microclimate, but also physiological parameters like skin temperatures and metabolic heat production in the cold differently.

Bacterial assemblages of the eastern Atlantic Ocean reveal both vertical and latitudinal biogeographic signatures

NASA Astrophysics Data System (ADS)

Friedline, C. J.; Franklin, R. B.; McCallister, S. L.; Rivera, M. C.

2012-06-01

Microbial communities are recognized as major drivers of the biogeochemical processes in the oceans. However, the genetic diversity and composition of those communities is poorly understood. The aim of this study is to investigate the composition of bacterial assemblages in three different water layer habitats: surface (2-20 m), deep chlorophyll maximum (DCM; 28-90 m), and deep (100-4600 m) at nine stations along the eastern Atlantic Ocean from 42.8° N to 23.7° S. The sampling of three discrete, predefined habitat types from different depths, Longhurstian provinces, and geographical locations allowed us to investigate whether marine bacterial assemblages show spatial variation and to determine if the observed spatial variation is influenced by current environmental conditions, historical/geographical contingencies, or both. The PCR amplicons of the V6 region of the 16S rRNA from 16 microbial assemblages were pyrosequenced, generating a total of 352 029 sequences; after quality filtering and processing, 257 260 sequences were clustered into 2871 normalized operational taxonomic units (OTU) using a definition of 97% sequence identity. Community ecology statistical analyses demonstrate that the eastern Atlantic Ocean bacterial assemblages are vertically stratified and associated with water layers characterized by unique environmental signals (e.g., temperature, salinity, and nutrients). Genetic compositions of bacterial assemblages from the same water layer are more similar to each other than to assemblages from different water layers. The observed clustering of samples by water layer allows us to conclude that contemporary environments are influencing the observed biogeographic patterns. Moreover, the implementation of a novel Bayesian inference approach that allows a more efficient and explicit use of all the OTU abundance data shows a distance effect suggesting the influence of historical contingencies on the composition of bacterial assemblages. Surface bacterial communities displayed a general congruency with the ecological provinces as defined by Longhurst with modest exceptions usually associated with unique hydrographic and biogeochemical features. Collectively, our findings suggest that vertical (habitat) and latitudinal (distance) biogeographic signatures are present and that both environmental parameters and ecological provinces drive the composition of bacterial assemblages in the eastern Atlantic Ocean.

Estimating Clothing Thermal Insulation Using an Infrared Camera

PubMed Central

Lee, Jeong-Hoon; Kim, Young-Keun; Kim, Kyung-Soo; Kim, Soohyun

2016-01-01

In this paper, a novel algorithm for estimating clothing insulation is proposed to assess thermal comfort, based on the non-contact and real-time measurements of the face and clothing temperatures by an infrared camera. The proposed method can accurately measure the clothing insulation of various garments under different clothing fit and sitting postures. The proposed estimation method is investigated to be effective to measure its clothing insulation significantly in different seasonal clothing conditions using a paired t-test in 99% confidence interval. Temperatures simulated with the proposed estimated insulation value show closer to the values of actual temperature than those with individual clothing insulation values. Upper clothing’s temperature is more accurate within 3% error and lower clothing’s temperature is more accurate by 3.7%~6.2% error in indoor working scenarios. The proposed algorithm can reflect the effect of air layer which makes insulation different in the calculation to estimate clothing insulation using the temperature of the face and clothing. In future, the proposed method is expected to be applied to evaluate the customized passenger comfort effectively. PMID:27005625

Characteristics of contaminant deposition onto a cylindrical body surrounded by porous clothing

NASA Astrophysics Data System (ADS)

Cho, Minki; Lee, Jinwon; Jung, Hyunsuk; Lee, Haewan; Pohang Univ of Sci; Tech Team; AgencyDefense Development Team

2014-11-01

In order to characterize the deposition pattern of air-borne contaminants on a human body protected by a garment, the air flow through the clothing and in the air gap between the clothing and the skin was numerically solved, and the deposition of the suspended contaminants on the skin was obtained over a wide variety of conditions-wind speed, human motion and clothing conditions. The penetrating air flow was sensitive to the pressure inside the air gap, for which a simple model was successfully formulated. Also the profile of the non-uniform deposition velocity or the Sherwood number could be well modeled based on the developing concentration boundary layer inside the air gap. The boundary layer thickness grew vary rapidly, nearly proportional to the square of the distance from the front stagnation point, which is much different from any other boundary layer studied in many engineering fields before. A rather universal function for the distribution of deposition speed over a cylindrical body was obtained, which remained valid for a very wide range of conditions. The characteristics for non-uniform and/or periodic external wind due to human motion were also analyzed. This study is supported by Agency for Defense Development.

A Novel Adjustable Concept for Permeable Gas/Vapor Protective Clothing: Balancing Protection and Thermal Strain.

PubMed

Bogerd, Cornelis Peter; Langenberg, Johannes Pieter; DenHartog, Emiel A

2018-02-13

Armed forces typically have personal protective clothing (PPC) in place to offer protection against chemical, biological, radiological and nuclear (CBRN) agents. The regular soldier is equipped with permeable CBRN-PPC. However, depending on the operational task, these PPCs pose too much thermal strain to the wearer, which results in a higher risk of uncompensable heat stress. This study investigates the possibilities of adjustable CBRN-PPC, consisting of different layers that can be worn separately or in combination with each other. This novel concept aims to achieve optimization between protection and thermal strain during operations. Two CBRN-PPC (protective) layers were obtained from two separate manufacturers: (i) a next-to-skin (NTS) and (ii) a low-burden battle dress uniform (protective BDU). In addition to these layers, a standard (non-CBRN protective) BDU (sBDU) was also made available. The effect of combining clothing layers on the levels of protection were investigated with a Man-In-Simulant Test. Finally, a mechanistic numerical model was employed to give insight into the thermal burden of the evaluated CBRN-PPC concepts. Combining layers results in substantially higher protection that is more than the sum of the individual layers. Reducing the airflow on the protective layer closest to the skin seems to play an important role in this, since combining the NTS with the sBDU also resulted in substantially higher protection. As expected, the thermal strain posed by the different clothing layer combinations decreases as the level of protection decreases. This study has shown that the concept of adjustable protection and thermal strain through multiple layers of CBRN-PPC works. Adjustable CBRN-PPC allows for optimization of the CBRN-PPC in relation to the threat level, thermal environment, and tasks at hand in an operational setting. © The Author(s) 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Cretaceous radiolarians from Baliojong ophiolite sequence, Sabah, Malaysia

NASA Astrophysics Data System (ADS)

Jasin, Basir; Tongkul, Felix

2013-10-01

The Baliojong ophiolite sequence exposed along the Baliojong River in Northern Sabah consists of volcanic rocks, mostly basalts, overlain by sedimentary layers consisting of well-bedded cherts, mudstones and sandstones. The ophiolite sequence occurs as steeply-dipping overturned thrust slices oriented approximately north-south. A total of 42 chert samples were collected from the sedimentary layers. However, most of the samples contain poorly preserved radiolarians. Only nine samples yielded moderately well-preserved radiolarians from three selected thrust slices. A total of 32 taxa were identified. Based on the stratigraphic distribution of selected taxa, the radiolarians can be divided into two assemblage zones. The first assemblage zone is Dictyomitra communis Zone characterized by the occurrence of Dictyomitra communis, Archaeodictyomitra (?) lacrimula, Sethocapsa (?) orca, Dictyomitra pseudoscalaris, and Pantanellium squinaboli. The assemblage indicates Barremian to Aptian in age. The second assemblage zone Pseudodictyomitra pseudomacrocephala Zone contains Pseudodictyomitra pseudomacrocephala, Dictyomitra gracilis, Dictyomitra montesserei, Xitus mclaughlini, and Dictyomitra obesa. This assemblage indicates an age of Albian and the presence of Pseudodictyomitra tiara suggests the age may extend up to Cenomanian. Each thrust slice yielded more or less similar radiolarian assemblages indicating that they all came from the same sedimentary layers.

Distinct bacterial assemblages reside at different depths in Arctic multiyear sea ice.

PubMed

Hatam, Ido; Charchuk, Rhianna; Lange, Benjamin; Beckers, Justin; Haas, Christian; Lanoil, Brian

2014-10-01

Bacterial communities in Arctic sea ice play an important role in the regulation of nutrient and energy dynamics in the Arctic Ocean. Sea ice has vertical gradients in temperature, brine salinity and volume, and light and UV levels. Multiyear ice (MYI) has at least two distinct ice layers: old fresh ice with limited permeability, and new saline ice, and may also include a surface melt pond layer. Here, we determine whether bacterial communities (1) differ with ice depth due to strong physical and chemical gradients, (2) are relatively homogenous within a layer, but differ between layers, or (3) do not vary with ice depth. Cores of MYI off northern Ellesmere Island, NU, Canada, were subsectioned in 30-cm intervals, and the bacterial assemblage structure was characterized using 16S rRNA gene pyrotag sequencing. Assemblages clustered into three distinct groups: top (0-30 cm); middle (30-150 cm); and bottom (150-236 cm). These layers correspond to the occurrence of refrozen melt pond ice, at least 2-year-old ice, and newly grown first-year ice at the bottom of the ice sheet, respectively. Thus, MYI houses multiple distinct bacterial assemblages, and in situ conditions appear to play a less important role in structuring microbial assemblages than the age or conditions of the ice at the time of formation. © 2014 Federation of European Microbiological Societies. Published by John Wiley & Sons Ltd. All rights reserved.

Effect of sweating set rate on clothing real evaporative resistance determined on a sweating thermal manikin in a so-called isothermal condition (T manikin = T a = T r).

PubMed

Lu, Yehu; Wang, Faming; Peng, Hui; Shi, Wen; Song, Guowen

2016-04-01

The ASTM F2370 (2010) is the only standard with regard to measurement of clothing real evaporative resistance by means of a sweating manikin. However, the sweating set-point is not recommended in the standard. In this study, the effect of sweating rate on clothing real evaporative resistance was investigated on a 34-zone "Newton" sweating thermal manikin in a so-called isothermal condition (T manikin = T a = T r). Four different sweating set rates (i.e., all segments had a sweating rate of 400, 800, 1200 ml/hr ∙ m(2), respectively, and different sweating rates were assigned to different segments) were applied to determine the clothing real evaporative resistance of five clothing ensembles and the boundary air layer. The results indicated that the sweating rate did not affect the real evaporative resistance of clothing ensembles with the absence of strong moisture absorbent layers. For the clothing ensemble with tight cotton underwear, a sweating rate of lower than 400 ml/hr ∙ m(2) is not recommended. This is mainly because the wet fabric "skin" might not be fully saturated and thus led to a lower evaporative heat loss and thereby a higher real evaporative resistance. For vapor permeable clothing, the real evaporative resistance determined in the so-called isothermal condition should be corrected before being used in thermal comfort or heat strain models. However, the reduction of wet thermal insulation due to moisture absorption in different test scenarios had a limited contribution to the effect of sweating rate on the real evaporative resistance.

Tests of protective clothing for the safe handling of pressurized lamps

NASA Technical Reports Server (NTRS)

Ewashinka, J. G.

1975-01-01

Tests were made to find a clothing material combination for use in handling high-pressure lamps. Monofilament nylon, ballistic nylon, and ballistic felt grouped into various multilayer combinations and chromed leather were positioned around and 30 cm (12 in.) away from exploding high-pressure lamps of different manufacturers and wattages. The results are: (1) 5024 nylon/ballistic felt/5024 nylon in a layered configuration was not penetrated by fragments of lamps as large as 6.5 kW; (2) this layered combination is lightweight and pliable and offers greater mobility and comfort to the user than previous protective clothing; and (3) Lexan plastic 1.6 mm (1/6 in.) thick to be used for face shield material showed no penetration for lamps as large as 20 kW.

40 CFR 268.45 - Treatment standards for hazardous debris.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Hazardous Debris 1 Technology description Performance and/or design and operating standard Contaminant..., Cloth, Concrete, Paper, Pavement, Rock, Wood: Removal of at least 0.6 cm of the surface layer; treatment...: Treatment to a clean debris surface 3; Brick, Cloth, Concrete, Paper, Pavement, Rock, Wood: Debris must be...

40 CFR 268.45 - Treatment standards for hazardous debris.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Hazardous Debris 1 Technology description Performance and/or design and operating standard Contaminant..., Cloth, Concrete, Paper, Pavement, Rock, Wood: Removal of at least 0.6 cm of the surface layer; treatment...: Treatment to a clean debris surface 3; Brick, Cloth, Concrete, Paper, Pavement, Rock, Wood: Debris must be...

40 CFR 268.45 - Treatment standards for hazardous debris.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Hazardous Debris 1 Technology description Performance and/or design and operating standard Contaminant..., Cloth, Concrete, Paper, Pavement, Rock, Wood: Removal of at least 0.6 cm of the surface layer; treatment...: Treatment to a clean debris surface 3; Brick, Cloth, Concrete, Paper, Pavement, Rock, Wood: Debris must be...

40 CFR 268.45 - Treatment standards for hazardous debris.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Hazardous Debris 1 Technology description Performance and/or design and operating standard Contaminant..., Cloth, Concrete, Paper, Pavement, Rock, Wood: Removal of at least 0.6 cm of the surface layer; treatment...: Treatment to a clean debris surface 3; Brick, Cloth, Concrete, Paper, Pavement, Rock, Wood: Debris must be...

40 CFR 268.45 - Treatment standards for hazardous debris.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Hazardous Debris 1 Technology description Performance and/or design and operating standard Contaminant..., Cloth, Concrete, Paper, Pavement, Rock, Wood: Removal of at least 0.6 cm of the surface layer; treatment...: Treatment to a clean debris surface 3; Brick, Cloth, Concrete, Paper, Pavement, Rock, Wood: Debris must be...

Making Complex Electrically Conductive Patterns on Cloth

NASA Technical Reports Server (NTRS)

Chu, Andrew; Fink, Patrick W.; Dobbins, Justin A.; Lin, Greg Y.; Scully, Robert C.; Trevino, Robert

2008-01-01

A method for automated fabrication of flexible, electrically conductive patterns on cloth substrates has been demonstrated. Products developed using this method, or related prior methods, are instances of a technology known as 'e-textiles,' in which electrically conductive patterns ar formed in, and on, textiles. For many applications, including high-speed digital circuits, antennas, and radio frequency (RF) circuits, an e-textile method should be capable of providing high surface conductivity, tight tolerances for control of characteristic impedances, and geometrically complex conductive patterns. Unlike prior methods, the present method satisfies all three of these criteria. Typical patterns can include such circuit structures as RF transmission lines, antennas, filters, and other conductive patterns equivalent to those of conventional printed circuits. The present method overcomes the limitations of the prior methods for forming the equivalent of printed circuits on cloth. A typical fabrication process according to the present method involves selecting the appropriate conductive and non-conductive fabric layers to build the e-textile circuit. The present method uses commercially available woven conductive cloth with established surface conductivity specifications. Dielectric constant, loss tangent, and thickness are some of the parameters to be considered for the non-conductive fabric layers. The circuit design of the conductive woven fabric is secured onto a non-conductive fabric layer using sewing, embroidery, and/or adhesive means. The portion of the conductive fabric that is not part of the circuit is next cut from the desired circuit using an automated machine such as a printed-circuit-board milling machine or a laser cutting machine. Fiducials can be used to align the circuit and the cutting machine. Multilayer circuits can be built starting with the inner layer and using conductive thread to make electrical connections between layers.

Clothing resultant thermal insulation determined on a movable thermal manikin. Part II: effects of wind and body movement on local insulation

NASA Astrophysics Data System (ADS)

Lu, Yehu; Wang, Faming; Wan, Xianfu; Song, Guowen; Zhang, Chengjiao; Shi, Wen

2015-10-01

Part II of this two-part series study was focused on examining the effects of wind and body movement on local clothing thermal insulation. Seventeen clothing ensembles with different layers (i.e., 1, 2, or 3 layers) were selected for this study. Local thermal insulation with different air velocities (0.15, 1.55, and 4.0 m/s) and walking speeds (0, 0.75, and 1.17 m/s) were investigated on a thermal manikin. Empirical equations for estimating local resultant clothing insulation as a function of local insulation, air velocity, and walking speed were developed. The results showed that the effects of wind and body movement on local resultant thermal resistance are complex and differ distinctively among different body parts. In general, the reductions of local insulation with wind at the chest, abdomen, and pelvis were greater than those at the lower leg and back, and the changes at the body extremity such as the forearm, thigh, and lower leg were higher than such immobile body parts as the chest and back. In addition, the wind effect interacted with the walking effect. This study may have important applications in human local thermal comfort modeling and functional clothing design.

Clothing resultant thermal insulation determined on a movable thermal manikin. Part II: effects of wind and body movement on local insulation.

PubMed

Lu, Yehu; Wang, Faming; Wan, Xianfu; Song, Guowen; Zhang, Chengjiao; Shi, Wen

2015-10-01

Part II of this two-part series study was focused on examining the effects of wind and body movement on local clothing thermal insulation. Seventeen clothing ensembles with different layers (i.e., 1, 2, or 3 layers) were selected for this study. Local thermal insulation with different air velocities (0.15, 1.55, and 4.0 m/s) and walking speeds (0, 0.75, and 1.17 m/s) were investigated on a thermal manikin. Empirical equations for estimating local resultant clothing insulation as a function of local insulation, air velocity, and walking speed were developed. The results showed that the effects of wind and body movement on local resultant thermal resistance are complex and differ distinctively among different body parts. In general, the reductions of local insulation with wind at the chest, abdomen, and pelvis were greater than those at the lower leg and back, and the changes at the body extremity such as the forearm, thigh, and lower leg were higher than such immobile body parts as the chest and back. In addition, the wind effect interacted with the walking effect. This study may have important applications in human local thermal comfort modeling and functional clothing design.

Dynamic Simulation of Human Thermoregulation and Heat Transfer for Spaceflight Applications

NASA Technical Reports Server (NTRS)

Miller, Thomas R.; Nelson, David A.; Bue, Grant; Kuznetz, Lawrence

2011-01-01

Models of human thermoregulation and heat transfer date from the early 1970s and have been developed for applications ranging from evaluating thermal comfort in spacecraft and aircraft cabin environments to predicting heat stress during EVAs. Most lumped or compartment models represent the body as an assemblage cylindrical and spherical elements which may be subdivided into layers to describe tissue heterogeneity. Many existing models are of limited usefulness in asymmetric thermal environments, such as may be encountered during an EVA. Conventional whole-body clothing models also limit the ability to describe local surface thermal and evaporation effects in sufficient detail. A further limitation is that models based on a standard man model are not readily scalable to represent large or small subjects. This work describes development of a new human thermal model derived from the 41-node man model. Each segment is divided into four concentric, constant thickness cylinders made up of a central core surrounded by muscle, fat, and skin, respectively. These cylinders are connected by the flow of blood from a central blood pool to each part. The central blood pool is updated at each time step, based on a whole-body energy balance. Results show the model simulates core and surface temperature histories, sweat evaporation and metabolic rates which generally are consistent with controlled exposures of human subjects. Scaling rules are developed to enable simulation of small and large subjects (5th percentile and 95th percentile). Future refinements will include a clothing model that addresses local surface insulation and permeation effects and developing control equations to describe thermoregulatory effects such as may occur with prolonged weightlessness or with aging.

Miocene non-marine diatoms from the western Cordillera basins of northern Peru

USGS Publications Warehouse

Fourtanier, E.; Gasse, F.; Bellier, O.; Bonhomme, M.G.; Robles, I.

1993-01-01

Diatom assemblages are documented from diatomite layers of two Miocene fluvio-lacustrine units from the basins of the western Cordillera of northern Peru: the Namora Formation and the Cajabamba Formation. Emphasis is given to taxa of particular stratigraphic interest. The diatom assemblages indicate for the Namora Formation the occurrence of swampy conditions with very dilute, low alkalinity water. The diatom assemblages of the Cajabamba Formation reflect the occurrence of fresh, slightly alkaline, eutrophic lakes with deep water in some samples, and swampy conditions with relatively high salt content in other samples. The Namora formation is late Miocene in age based on the diatom assemblages and radiometric analyses. The diatom layers of the Cajabamba Formation are dated as late middle to early late Miocene. -from Authors

Field tests on human tolerance to (LNG) fire radiant heat exposure, and attenuation effects of clothing and other objects.

PubMed

Raj, Phani K

2008-09-15

A series of field tests exposing mannequins clothed with civilian clothing to a 3m x 3m square liquefied natural gas (LNG) pool fire was conducted. Both single layer clothing and double layer clothing were used. The radiant heat flux incident outside the clothing and incident on the skin covered by clothing were measured using wide-angle radiometers, for durations of 100-200 s (per test). The levels of heat flux incident on the clothing were close to 5 kW/m(2). The magnitude of the radiant heat attenuation factor (AF) across the thickness was determined. AF varies between 2 and higher for cotton and polyester clothing (thickness 0.286-1.347 mm); AF value of 6 was measured for 1.347 mm thickness. Single sheet newspaper held about 5 cm in front of mannequins and exposed to incident flux of 5 kW/m(2) resulted in AF of 5, and AF of 8 with double sheets. AF decreases linearly with increasing heat flux values and linearly increases with thickness. The author exposed himself, in normal civilian clothing (of full sleeve cotton/polyester shirt and jean pants), to radiant heat from a LNG fire. The exposure was for several tens of seconds to heat flux levels ranging from 3.5 kW/m(2) to 5(+) kW/m(2) (exposure times from 25s to 97 s at average heat flux values in the 4 kW/m(2) and 5 kW/m(2)range). Occasionally, he was exposed to (as high as) 7 kW/m(2) for durations of several seconds. He did not suffer any unbearable or even severe pain nor did he experience blisters or burns or any other injury on the unprotected skin of his body. The incident heat fluxes on the author were measured by a hand-held radiometer (with digital display) as well as by strapped on wide-angle radiometers connected to a computer. He could withstand the US regulatory criterion of 5 kW/m(2) (for 30 s) without suffering any damage or burns. Temperature measured on author's skin covered by clothing did not rise above the normal body temperature even after 200 s of exposure to 4 kW/m(2) average heat flux.

Burns and military clothing.

PubMed

McLean, A D

2001-02-01

Burn injury is a ubiquitous threat in the military environment. The risks during combat are well recognised, but the handling of fuel, oil, munitions and other hot or flammable materials during peacetime deployment and training also imposes an inherent risk of accidental burn injury. Over the last hundred years, the burn threat in combat has ranged from nuclear weapons to small shoulder-launched missiles. Materials such as napalm and white phosphorus plainly present a risk of burn, but the threat extends to encompass personnel in vehicles attacked by anti-armour weapons, large missiles, fuel-air explosives and detonations/conflagrations on weapons platforms such as ships. Large numbers of burn casualties were caused at Pearl Harbor, in Hiroshima and Nagasaki, Vietnam, during the Arab/Israeli Wars and in the Falkland Islands conflict. The threat from burns is unlikely to diminish, indeed new developments in weapons seek to exploit the vulnerability of the serviceman and servicewoman to burns. Clothing can be a barrier to some types of burn--both inherently in the properties of the material, but also by trapping air between clothing layers. Conversely, ignition of the clothing may exacerbate a burn. There is hearsay that burnt clothing products within a wound may complicate the clinical management, or that materials that melt (thermoplastic materials) should not be worn if there is a burn threat. This paper explores the incidence of burn injury, the mechanisms of heat transfer to bare skin and skin covered by materials, and the published evidence for the complication of wound management by materials. Even light-weight combat clothing can offer significant protection to skin from short duration flash burns; the most vulnerable areas are the parts of the body not covered--face and hands. Multilayered combat clothing can offer significant protection for short periods from engulfment by flames; lightweight tropical wear with few layers offers little protection. Under high heat loads in the laboratory, combat clothing can ignite, but there is little evidence that clothing ignition is a common occurrence in military burn casualties. Thermoplastic materials have many benefits in civil and military clothing. There is little objective evidence that they exacerbate burns, or complicate burn management. Their use in military clothing must be based on objective evidence, not hearsay.

Dermal uptake of phthalates from clothing: Comparison of model to human participant results.

PubMed

Morrison, G C; Weschler, C J; Bekö, G

2017-05-01

In this research, we extend a model of transdermal uptake of phthalates to include a layer of clothing. When compared with experimental results, this model better estimates dermal uptake of diethylphthalate and di-n-butylphthalate (DnBP) than a previous model. The model predictions are consistent with the observation that previously exposed clothing can increase dermal uptake over that observed in bare-skin participants for the same exposure air concentrations. The model predicts that dermal uptake from clothing of DnBP is a substantial fraction of total uptake from all sources of exposure. For compounds that have high dermal permeability coefficients, dermal uptake is increased for (i) thinner clothing, (ii) a narrower gap between clothing and skin, and (iii) longer time intervals between laundering and wearing. Enhanced dermal uptake is most pronounced for compounds with clothing-air partition coefficients between 10 4 and 10 7 . In the absence of direct measurements of cotton cloth-air partition coefficients, dermal exposure may be predicted using equilibrium data for compounds in equilibrium with cellulose and water, in combination with computational methods of predicting partition coefficients. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Bulk and contact resistances of gas diffusion layers in proton exchange membrane fuel cells

NASA Astrophysics Data System (ADS)

Ye, Donghao; Gauthier, Eric; Benziger, Jay B.; Pan, Mu

2014-06-01

A multi-electrode probe is employed to distinguish the bulk and contact resistances of the catalyst layer (CL) and the gas diffusion layer (GDL) with the bipolar plate (BPP). Resistances are compared for Vulcan carbon catalyst layers (CL), carbon paper and carbon cloth GDL materials, and GDLs with microporous layers (MPL). The Vulcan carbon catalyst layer bulk resistance is 100 times greater than the bulk resistance of carbon paper GDL (Toray TG-H-120). Carbon cloth (CCWP) has bulk and contact resistances twice those of carbon paper. Compression of the GDL decreases the GDL contact resistance, but has little effect on the bulk resistance. Treatment of the GDL with polytetrafluoroethylene (PTFE) increases the contact resistance, but has little effect on the bulk resistance. A microporous layer (MPL) added to the GDL decreases the contact resistance, but has little effect on the bulk resistance. An equivalent circuit model shows that for channels less than 1 mm wide the contact resistance is the major source of electronic resistance and is about 10% of the total ohmic resistance associated with the membrane electrode assembly.

Effects of a mulch layer on the assemblage and abundance of mesostigmatan mites and other arthropods in the soil of a sugarcane agro-ecosystem in Australia.

PubMed

Manwaring, M; Wallace, H M; Weaver, H J

2018-03-01

Sugarcane farmers can utilise a soil conservation technique called green cane trash blanketing, a form of mulching that can increase plant productivity through a number of channels, e.g., via altering soil physical, chemical and biological characteristics, and influence soil arthropod assemblages. Predatory mites (Mesostigmata) are important components of soil communities because they can control populations of other soil-dwelling pest species. Our aim was to characterise mulch-influenced predatory Mesostigmata community assemblages in sugarcane soils in Queensland, Australia. We found that application of a mulch layer significantly increased the abundance of Mesostigmata, and oribatid mites and collembolans, in soils. Furthermore, we observed that the assemblages of Mesostigmata in soil covered by mulch were significantly different to those in bare soil; and the assemblages of Mesostigmata changed over time. The assemblages of Mesostigmata, but not Oribatida or collembolans, were significantly different in soil under mulch depending on whether the mulch was freshly laid, or decomposing. Our results show that the use of mulch, specifically the green cane trash blanket, can increase overall microarthropod abundance including Mesostigmata. This is likely due to increased habitat complexity and changing resource availability.

Method for making hot-pressed fiber-reinforced carbide-graphite composite

DOEpatents

Riley, Robert E.; Wallace Sr., Terry C.

1979-01-01

A method for the chemical vapor deposition of a uniform coating of tantalum metal on fibers of a woven graphite cloth is described. Several layers of the coated cloth are hot pressed to produce a tantalum carbide-graphite composite having a uniformly dispersed, fine grained tantalum carbide in graphite with compositions in the range of 15 to 40 volume percent tantalum carbide.

Sphagnum-dwelling testate amoebae in subarctic bogs are more sensitive to soil warming in the growing season than in winter: the results of eight-year field climate manipulations.

PubMed

Tsyganov, Andrey N; Aerts, Rien; Nijs, Ivan; Cornelissen, Johannes H C; Beyens, Louis

2012-05-01

Sphagnum-dwelling testate amoebae are widely used in paleoclimate reconstructions as a proxy for climate-induced changes in bogs. However, the sensitivity of proxies to seasonal climate components is an important issue when interpreting proxy records. Here, we studied the effects of summer warming, winter snow addition solely and winter snow addition together with spring warming on testate amoeba assemblages after eight years of experimental field climate manipulations. All manipulations were accomplished using open top chambers in a dry blanket bog located in the sub-Arctic (Abisko, Sweden). We estimated sensitivity of abundance, diversity and assemblage structure of living and empty shell assemblages of testate amoebae in the living and decaying layers of Sphagnum. Our results show that, in a sub-arctic climate, testate amoebae are more sensitive to climate changes in the growing season than in winter. Summer warming reduced species richness and shifted assemblage composition towards predominance of xerophilous species for the living and empty shell assemblages in both layers. The higher soil temperatures during the growing season also decreased abundance of empty shells in both layers hinting at a possible increase in their decomposition rates. Thus, although possible effects of climate changes on preservation of empty shells should always be taken into account, species diversity and structure of testate amoeba assemblages in dry subarctic bogs are sensitive proxies for climatic changes during the growing season. Copyright © 2011 Elsevier GmbH. All rights reserved.

Outdoor clothing: its relationship to geography, climate, behaviour and cold-related mortality in Europe

NASA Astrophysics Data System (ADS)

Donaldson, G. C.; Rintamäki, H.; Näyhä, S.

It has been suggested, that the inhabitants of northern European regions, who experience little cold-related mortality, protect themselves outdoors by wearing more clothing, at the same temperature, than people living in southern regions where such mortality is high. Outdoor clothing data were collected in eight regions from 6583 people divided by sex and age group (50-59 and 65-74 years). Across Europe, the total clothing worn (as assessed by dry thermal insulation and numbers of items or layers) increased significantly with cold, wind, less physical activity and longer periods outdoors. Men wore 0.14 clo (1 clo=0.115 m2 K W-1) more than women and the older people wore 0.05 clo more than the younger group (both P<0.001). After allowance for these factors, regional differences in insulation and item number were correlated (r=-0.74, P=0.037; r=-0.74, P=0.036 respectively), but not those in clothing layers (r=-0.21 P=0.61), with indices of cold-related mortality. Cold weather most increased the wearing of gloves, scarves and hats. The geographical variation in the wearing of these three together items more closely matched that in cold-related mortality (r=-0.89, P=0.003). A possible explanation for this may be that they protect the head and hands, where stimulation by cold greatly increases peripheral vasoconstriction causing a rise in blood pressure that procedure haemoconcentration and raised cardiovascular risk.

Modeling Skin Injury from Hot Spills on Clothing.

PubMed

Log, Torgrim

2017-11-11

The present work analyzes scald burns from hot beverages, such as coffee and tea, spilled on the lap, i.e., an incident that may occur in daily life. The Pennes bioheat equation is solved numerically for small spills wetting the clothing, i.e., the fabric prevents the spilled liquid from draining away. Temperatures are analyzed in the wetted fabric and the skin layers and the resulting skin injury is calculated based on the basal layer temperature. Parameters influencing burn severity, such as clothing thickness, liquid temperature, removal of fabric and thermal effects of post scald water cooling are analyzed. The fabric cools the water some but represents a threat since the entrapped water results in a prolonged heat supply. The liquid temperature turned out to be the most important injury parameter, where liquid temperature of about 80-85 °C seems to be a limit for developing superficial partial-thickness burns in the present minimum case, i.e., where the liquid just wets the fabric. Spilling water in excess of just wetting the fabric, more severe burns will develop at lower liquid temperatures due to the prolonged heat supply. Higher liquid temperatures will nearly instantly develop more severe burns. It is demonstrated that removal of the clothing within the first seconds after the spill may significantly reduce the scalding severity. The general advice is therefore to avoid excessive heating of beverages and, if the beverage is spilled, to quickly remove the wetted clothing. Prolonged tempered water cooling is advised to improve the healing processes.

Three-dimensional SnO2@TiO2 double-shell nanotubes on carbon cloth as a flexible anode for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Zhang, Haifeng; Ren, Weina; Cheng, Chuanwei

2015-07-01

In this study, three-dimensional SnO2@TiO2 double-shell nanotubes on carbon cloth are synthesized by a combination of the hydrothermal method for ZnO nanorods and a subsequent SnO2 and TiO2 thin film coating with atomic layer deposition (ALD). The as-prepared SnO2@TiO2 double-shell nanotubes are further tested as a flexible anode for Li ion batteries. The SnO2@TiO2 double-shell nanotubes/carbon cloth electrode exhibited a high initial discharge capacity (e.g. 778.8 mA h g-1 at a high current density of 780 mA g-1) and good cycling performance, which could be attributed to the 3D double-layer nanotube structure. The interior space of the stable TiO2 hollow tube can accommodate the large internal stress caused by volume expansion of SnO2 and protect SnO2 from pulverization and exfoliation.

The maximum evaporative potential of constant wear immersion suits influences the risk of excessive heat strain for helicopter aircrew

PubMed Central

2018-01-01

The heat exchange properties of aircrew clothing including a Constant Wear Immersion Suit (CWIS), and the environmental conditions in which heat strain would impair operational performance, were investigated. The maximum evaporative potential (im/clo) of six clothing ensembles (three with a flight suit (FLY) and three with a CWIS) of varying undergarment layers were measured with a heated sweating manikin. Biophysical modelling estimated the environmental conditions in which body core temperature would elevate above 38.0°C during routine flight. The im/clo was reduced with additional undergarment layers, and was more restricted in CWIS compared to FLY ensembles. A significant linear relationship (r2 = 0.98, P<0.001) was observed between im/clo and the highest wet-bulb globe temperature in which the flight scenario could be completed without body core temperature exceeding 38.0°C. These findings provide a valuable tool for clothing manufacturers and mission planners for the development and selection of CWIS’s for aircrew. PMID:29723267

Mineralogy and geochemical evolution of the Little Three pegmatite-aplite layered intrusive, Ramona, California.

USGS Publications Warehouse

Stern, L.A.; Brown, Gordon E.; Bird, D.K.; Jahns, R.H.; Foord, E.E.; Shigley, J.E.; Spaulding, L.B.

1986-01-01

Several layered pegmatite-aplite intrusives exposed at the Little Three mine, Ramona, display closely associated fine-grained to giant-textured mineral assemblages which are believed to have co-evolved from a hydrous aluminosilicate residual melt with an exsolved supercritical vapour phase. Calculations of phase relations between the major pegmatite-aplite mineral assemblages and supercritical aqueous fluid were made, assuming equilibrium and closed-system behaviour as a first-order model.-J.A.Z.

Attenuation of X and Gamma Rays in Personal Radiation Shielding Protective Clothing.

PubMed

Kozlovska, Michaela; Cerny, Radek; Otahal, Petr

2015-11-01

A collection of personal radiation shielding protective clothing, suitable for use in case of accidents in nuclear facilities or radiological emergency situations involving radioactive agents, was gathered and tested at the Nuclear Protection Department of the National Institute for Nuclear, Chemical and Biological Protection, Czech Republic. Attenuating qualities of shielding layers in individual protective clothing were tested via spectra measurement of x and gamma rays, penetrating them. The rays originated from different radionuclide point sources, the gamma ray energies of which cover a broad energy range. The spectra were measured by handheld spectrometers, both scintillation and High Purity Germanium. Different narrow beam geometries were adjusted using a special testing bench and a set of various collimators. The main experimentally determined quantity for individual samples of personal radiation shielding protective clothing was x and gamma rays attenuation for significant energies of the spectra. The attenuation was assessed comparing net peak areas (after background subtraction) in spectra, where a tested sample was placed between the source and the detector, and corresponding net peak areas in spectra, measured without the sample. Mass attenuation coefficients, which describe attenuating qualities of shielding layers materials in individual samples, together with corresponding lead equivalents, were determined as well. Experimentally assessed mass attenuation coefficients of the samples were compared to the referred ones for individual heavy metals.

Diatoms as Proxies for Abrupt Events in the Hudson River Estuary

NASA Astrophysics Data System (ADS)

Skorski, W.; Abbott, D. H.; Recasens, C.; Breger, D. L.

2014-12-01

The Hudson River estuary has been subject to many abrupt events throughout its history including hurricanes, droughts and pluvials. Hurricanes in particular are rare, discrete events that if fingerprinted can be used to develop better age models for Hudson River sediments. Proxies use observed physical characteristics or biological assemblages (e.g. diatom and foraminiferal assemblages) as tools to reconstruct past conditions prior to the modern instrumental record. Using a sediment core taken from the Hudson River (CDO2-29A), in New York City, drought and pluvial layers were selected based on Cs-137 dating while hurricane layers were determined from occurrences of tropical to subtropical foraminifera. Contrary to previous studies (Weaver, 1970, Weiss et al, 1978), more than sixty different diatom species have been identified using a scanning electron microscope (SEM). Cosmopolitan, hurricane and drought assemblages have begun to be identified after observing multiple layers (Table 1). Tropical foraminifera dominated by Globigerinoides ruber pink were also found in a hurricane layer that we infer was deposited during Hurricane Belle in 1976. More diatom abundance analyses and cataloged SEM pictures will provide further insight into these proxies. Table 1 Diatom Genera and Species Environment Clarification Cyclotella caspia Planktonic, marine-brackish Cosmopolitan Karayevia clevei Freshwater Cosmopolitan Melosira sp Planktonic, marine Cosmopolitan Thalassiosira sp Marine, brackish Cosmopolitan Staurosirella leptostauron Benthic, freshwater Cosmopolitan Actinoptychus senarius Planktonic or benthic, freshwater to brackish Hurricane and pluvial layers Amphora aff. sp Benthic, marine or freshwater Hurricane layers only Nitzschia sp Benthic, marine or freshwater Hurricane layers only Gomphonema sp Freshwater Hurricane layers only Surirella sp Marine-brackish Drought layer only Triceratium sp Marine Drought layer only Other Genera and species Environment Clarification Globigerinoides ruber pink Tropical Hurricane layers only Silicoflagellate sp Planktonic, marine Hurricane layers only

Heat Stress Evaluation of Two-layer Chemical Demilitarization Ensembles with a Full Face Negative Pressure Respirator

PubMed Central

FLETCHER, Oclla Michele; GUERRINA, Ryan; ASHLEY, Candi D.; BERNARD, Thomas E.

2014-01-01

The purpose of this study was to examine the heat stress effects of three protective clothing ensembles: (1) protective apron over cloth coveralls including full face negative pressure respirator (APRON); (2) the apron over cloth coveralls with respirator plus protective pants (APRON+PANTS); and (3) protective coveralls over cloth coveralls with respirator (PROTECTIVE COVERALLS). In addition, there was a no-respirator ensemble (PROTECTIVE COVERALLS-noR), and WORK CLOTHES as a reference ensemble. Four acclimatized male participants completed a full set of five trials, and two of the participants repeated the full set. The progressive heat stress protocol was used to find the critical WBGT (WBGTcrit) and apparent total evaporative resistance (Re,T,a) at the upper limit of thermal equilibrium. The results (WBGTcrit [°C-WBGT] and Re,T,a [kPa m2 W−1]) were WORK CLOTHES (35.5, 0.0115), APRON (31.6, 0.0179), APRON+PANTS (27.7, 0.0244), PROTECTIVE COVERALLS (25.9, 0.0290), and PROTECTIVE COVERALLS-noR (26.2, 0.0296). There were significant differences among the ensembles. Supporting previous studies, there was little evidence to suggest that the respirator contributed to heat stress. PMID:24705801

Modeling Skin Injury from Hot Spills on Clothing

PubMed Central

2017-01-01

The present work analyzes scald burns from hot beverages, such as coffee and tea, spilled on the lap, i.e., an incident that may occur in daily life. The Pennes bioheat equation is solved numerically for small spills wetting the clothing, i.e., the fabric prevents the spilled liquid from draining away. Temperatures are analyzed in the wetted fabric and the skin layers and the resulting skin injury is calculated based on the basal layer temperature. Parameters influencing burn severity, such as clothing thickness, liquid temperature, removal of fabric and thermal effects of post scald water cooling are analyzed. The fabric cools the water some but represents a threat since the entrapped water results in a prolonged heat supply. The liquid temperature turned out to be the most important injury parameter, where liquid temperature of about 80–85 °C seems to be a limit for developing superficial partial-thickness burns in the present minimum case, i.e., where the liquid just wets the fabric. Spilling water in excess of just wetting the fabric, more severe burns will develop at lower liquid temperatures due to the prolonged heat supply. Higher liquid temperatures will nearly instantly develop more severe burns. It is demonstrated that removal of the clothing within the first seconds after the spill may significantly reduce the scalding severity. The general advice is therefore to avoid excessive heating of beverages and, if the beverage is spilled, to quickly remove the wetted clothing. Prolonged tempered water cooling is advised to improve the healing processes. PMID:29137118

A primer on clothing systems for cold-weather field work

USGS Publications Warehouse

Denner, Jon

1990-01-01

Conducting field work in cold weather is a demanding task. The most important safety consideration for field personnel is to maintain normal body temperature and avoid hypothermia.The human body adjusts to cold temperatures through different physiological processes. Heat production is enhanced by increases in the rates of basal metabolism, specific dynamic action, and physical exercise, and heat loss is reduced by vasoconstriction.Physiological adaptations alone are inadequate to stop rapid heat loss in cold temperatures. Additional insulation in the form of cold-weather clothing is necessary to retain heat.The most practical method of dressing for winter conditions is the layering system. Wearing multiple thin layers allows one to fine tune the insulation needed for different temperatures and activity levels.

Humanlike Articulate Robotic Headform to Replace Human Volunteers in Respirator Fit Testing

DTIC Science & Technology

2012-12-01

Vinci suggested that a wet, finely woven cloth could protect sailors from the particles [6] and, later in the 16th century, Agricola described a...survivors. An improvised response by Canadian troops, using urine-soaked cloths as primitive respirators to dissolve and neutralize the chlorine vapor...speech, and were usually covered with a thin layer of rubber or plastic that made no attempt to mimic the thickness and properties of human facial

Relationship between 'live' and dead benthic foraminiferal assemblages in the abyssal NE Atlantic

NASA Astrophysics Data System (ADS)

Stefanoudis, Paris V.; Bett, Brian J.; Gooday, Andrew J.

2017-03-01

Dead foraminiferal assemblages within the sediment mixed layer provide an integrated, time-averaged view of the foraminiferal fauna, while the relationship between dead and live assemblages reflects the population dynamics of different species together with taphonomic processes operating over the last few hundred years. Here, we analysed four samples for 'live' (Rose-Bengal-stained) and dead benthic foraminifera (0-1 cm sediment layer, >150 μm) from four sites in the area of the Porcupine Abyssal Plain Sustained Observatory (PAP-SO; NE Atlantic, 4850 m water depth). Two sites were located on abyssal hills and two on the adjacent abyssal plain. Our results indicate that the transition from live to dead benthic foraminiferal assemblages involved a dramatic loss of delicate agglutinated and organic-walled tests (e.g. Lagenammina, Nodellum, Reophax) with poor preservation potential, and to a lesser extent that of some relatively fragile calcareous tests (mostly miliolids), possibly a result of dissolution. Other processes, such as the transport of tests by bottom currents and predation, are unlikely to have substantially altered the composition of dead faunas. Positive live to dead ratios suggest that some species (notably Epistominella exigua and Bolivina spathulata) may have responded to recent phytodetritus input. Although the composition of live assemblages seemed to be influenced by seafloor topography (abyssal hills vs. plain), no such relation was found for dead assemblages. We suggest that PAP-SO fossil assemblages are likely to be comparable across topographically contrasting sites, and dominated by calcareous and some robust agglutinated forms with calcitic cement (e.g. Eggerella).

Flame-retardant contamination of firefighter personal protective clothing - A potential health risk for firefighters.

PubMed

Alexander, Barbara M; Baxter, C Stuart

2016-09-01

There is a high incidence of cardiovascular disease and certain cancers in firefighters that may be related to their occupational exposure to hazardous substances. Exposure may result from contaminated personal protective gear, as well as from direct exposure at fire scenes. This study characterized flame-retardant contamination on firefighter personal protective clothing to assess exposure of firefighters to these chemicals. Samples from used and unused firefighter protective clothing, including gloves, hoods and a coat wristlet, were extracted with methylene chloride and analyzed by EPA method 8270D Specific Ion Method (SIM) for polybrominated diphenyl ethers (PBDEs). Until recently PBDEs were some of the most common flame-retardant chemicals used in the US. Fifteen of the seventeen PBDEs for which analysis was performed were found on at least one clothing swatch. Every clothing sample, including an unused hood and all three layers of an unused glove, held a detectable concentration of at least one PBDE. These findings, along with previous research, suggest that firefighters are exposed to PBDE flame retardants at levels much higher than the general public. PBDEs are found widely dispersed in the environment and still persist in existing domestic materials such as clothing and furnishings. Firefighter exposure to flame retardants therefore merits further study.

Hierarchical spatial models for predicting tree species assemblages across large domains

Treesearch

Andrew O. Finley; Sudipto Banerjee; Ronald E. McRoberts

2009-01-01

Spatially explicit data layers of tree species assemblages, referred to as forest types or forest type groups, are a key component in large-scale assessments of forest sustainability, biodiversity, timber biomass, carbon sinks and forest health monitoring. This paper explores the utility of coupling georeferenced national forest inventory (NFI) data with readily...

Hypothermia

MedlinePlus

... not possible, get the person out of the wind and use a blanket to provide insulation from ... protect your body. These include: Mittens (not gloves) Wind-proof, water-resistant, many-layered clothing Two pairs ...

Frostbite

MedlinePlus

... trapped between the layers of clothing acts as insulation against the cold. Wear windproof and waterproof outer ... liners that fit well, wick moisture and provide insulation. You might also try hand and foot warmers. ...

The evaluation of layered separators for nickel-hydrogen cells

NASA Technical Reports Server (NTRS)

Gahn, Randall F.

1991-01-01

The concept of using layered separators to achieve the required electrolyte retention and bubble pressure fo nickel-hydrogen cells was evaluated in a boilerplate cell test. Zircar cloth, polyethylene paper and polypropylene felt were combined with a layer of radiation-grafted polyethylene film to achieve the required properties. Three cells of each layered separator were built and tested by characterization cycling and by low earth orbit cycling for 5000 cycles at 80 percent DOD. Three cells containing asbestos separators were used as the reference.

Performance and microbial ecology of air-cathode microbial fuel cells with layered electrode assemblies.

PubMed

Butler, Caitlyn S; Nerenberg, Robert

2010-05-01

Microbial fuel cells (MFCs) can be built with layered electrode assemblies, where the anode, proton exchange membrane (PEM), and cathode are pressed into a single unit. We studied the performance and microbial community structure of MFCs with layered assemblies, addressing the effect of materials and oxygen crossover on the community structure. Four MFCs with layered assemblies were constructed using Nafion or Ultrex PEMs and a plain carbon cloth electrode or a cathode with an oxygen-resistant polytetrafluoroethylene diffusion layer. The MFC with Nafion PEM and cathode diffusion layer achieved the highest power density, 381 mW/m(2) (20 W/m(3)). The rates of oxygen diffusion from cathode to anode were three times higher in the MFCs with plain cathodes compared to those with diffusion-layer cathodes. Microsensor studies revealed little accumulation of oxygen within the anode cloth. However, the abundance of bacteria known to use oxygen as an electron acceptor, but not known to have exoelectrogenic activity, was greater in MFCs with plain cathodes. The MFCs with diffusion-layer cathodes had high abundance of exoelectrogenic bacteria within the genus Geobacter. This work suggests that cathode materials can significantly influence oxygen crossover and the relative abundance of exoelectrogenic bacteria on the anode, while PEM materials have little influence on anode community structure. Our results show that oxygen crossover can significantly decrease the performance of air-cathode MFCs with layered assemblies, and therefore limiting crossover may be of particular importance for these types of MFCs.

Application of biomass-derived flexible carbon cloth coated with MnO2 nanosheets in supercapacitors

NASA Astrophysics Data System (ADS)

He, Shuijian; Chen, Wei

2015-10-01

Successful application of inexpensive energy storage devices lies in the exploitation of fabrication approaches that are based on cost-efficient materials and that can be easily scaled up. Here, inexpensive textile weaved by natural flax fiber is selected as raw material in preparing flexible and binder-free electrode material for supercapacitors. Although carbon fiber cloth obtained from the direct carbonization of flax textile exhibits a low specific capacitance of 0.78 F g-1, carbon fiber cloth electrode shows a very short relaxation time of 39.1 m s and good stability with almost 100% capacitance retaining after 104 cycles at 5 A g-1. To extend the application of the resulting carbon cloth in supercapacitor field, a layer of MnO2 nanosheets is deposited on the surface of carbon fiber via in situ redox reaction between carbon and KMnO4. The specific capacitance of MnO2 reaches 683.73 F g-1 at 2 A g-1 and still retains 269.04 F g-1 at 300 A g-1, indicating the excellent rate capacitance performance of the carbon cloth/MnO2 hybrids. The present study shows that carbon cloth derived from flax textile can provide a low-cost material platform for the facile, cost-efficient and large scale fabrication of binder-free electrode materials for energy storage devices.

Shining Light on Benthic Macroalgae: Mechanisms of Complementarity in Layered Macroalgal Assemblages

PubMed Central

Tait, Leigh W.; Hawes, Ian; Schiel, David R.

2014-01-01

Phototrophs underpin most ecosystem processes, but to do this they need sufficient light. This critical resource, however, is compromised along many marine shores by increased loads of sediments and nutrients from degraded inland habitats. Increased attenuation of total irradiance within coastal water columns due to turbidity is known to reduce species' depth limits and affect the taxonomic structure and architecture of algal-dominated assemblages, but virtually no attention has been paid to the potential for changes in spectral quality of light energy to impact production dynamics. Pioneering studies over 70 years ago showed how different pigmentation of red, green and brown algae affected absorption spectra, action spectra, and photosynthetic efficiency across the PAR (photosynthetically active radiation) spectrum. Little of this, however, has found its way into ecological syntheses of the impacts of optically active contaminants on coastal macroalgal communities. Here we test the ability of macroalgal assemblages composed of multiple functional groups (including representatives from the chlorophyta, rhodophyta and phaeophyta) to use the total light resource, including different light wavelengths and examine the effects of suspended sediments on the penetration and spectral quality of light in coastal waters. We show that assemblages composed of multiple functional groups are better able to use light throughout the PAR spectrum. Macroalgal assemblages with four sub-canopy species were between 50–75% more productive than assemblages with only one or two sub-canopy species. Furthermore, attenuation of the PAR spectrum showed both a loss of quanta and a shift in spectral distribution with depth across coastal waters of different clarity, with consequences to productivity dynamics of diverse layered assemblages. The processes of light complementarity may help provide a mechanistic understanding of how altered turbidity affects macroalgal assemblages in coastal waters, which are increasingly threatened by diminishing light quantity and altered spectral distributions through sedimentation and eutrophication. PMID:25438045

Mineralogy and stratigraphy of phyllosilicate-bearing and dark mantling units in the greater Mawrth Vallis/west Arabia Terra area: Constraints on geological origin

USGS Publications Warehouse

Noe Dobrea, E.Z.; Bishop, J.L.; McKeown, N.K.; Fu, R.; Rossi, C.M.; Michalski, J.R.; Heinlein, C.; Hanus, V.; Poulet, F.; Mustard, R.J.F.; Murchie, S.; McEwen, A.S.; Swayze, G.; Bibring, J.-P.; Malaret, E.; Hash, C.

2010-01-01

Analyses of MRO/CRISM images of the greater Mawrth Vallis region of Mars affirm the presence of two primary phyllosilicate assemblages throughout a region ∼1000 × 1000 km. These two units consist of an Fe/Mg-phyllosilicate assemblage overlain by an Al-phyllosilicate and hydrated silica assemblage. The lower unit contains Fe/Mg-smectites, sometimes combined with one or more of these other Fe/Mg-phyllosilicates: serpentine, chlorite, biotite, and/or vermiculite. It is more than 100 m thick and finely layered at meter scales. The upper unit includes Al-smectite, kaolin group minerals, and hydrated silica. It is tens of meters thick and finely layered as well. A common phyllosilicate stratigraphy and morphology is observed throughout the greater region wherever erosional windows are present. This suggests that the geologic processes forming these units must have occurred on at least a regional scale. Sinuous ridges (interpreted to be inverted channels) and narrow channels cut into the upper clay-bearing unit suggesting that aqueous processes were prevalent after, and possibly during, the deposition of the layered units. We propose that layered units may have been deposited at Mawrth Vallis and then subsequently altered to form the hydrated units. The Fe/Mg-phyllosilicate assemblage is consistent with hydrothermal alteration or pedogenesis of mafic to ultramafic rocks. The Al-phyllosilicate/hydrated silica unit may have formed through alteration of felsic material or via leaching of basaltic material through pedogenic alteration or a mildly acidic environment. These phyllosilicate-bearing units are overlain by a darker, relatively unaltered, and indurated material that has probably experienced a complex geological history.

Layering garments during rest and exercise in the cold (8°C): wearer responses and comparability with selected fabric properties.

PubMed

MacRae, Braid A; Laing, Raechel M; Wilson, Cheryl A; Niven, Brian E

2014-01-01

How garments contribute to performance of the clothing system during wear is of interest, as is understanding the value of using fabric properties to inform end-use characteristics. To investigate the influences of layering upper-body garments, four fabrics were used to construct two first-layer garments (wool and polyester) and two outer-layer garments (wool and membrane laminate). Over six sessions, 10 moderately trained males wore each first-layer garment as a single layer and in combination with each outer-layer garment while resting, running and walking in cold environmental conditions (8 ± 1°C, 81 ± 4% RH). Here, the type of garment arrangement worn (fabric type or number of layers) had little influence on heart rate, core body temperature and change in body mass. Weighted mean covered skin temperature was warmer and weighted mean next-to-skin vapour pressure was typically higher (following the onset of exercise) with two layers versus one. Differences among fabrics for individual properties were typically overstated compared to differences among corresponding garments for physiological and psychophysical variables under the conditions of this study. These findings inform the interpretation of particular fabric properties and highlight issues to be acknowledged during development/refinement of fabric test methods. We examined the way in which selected fibre, fabric and garment (layering) characteristics contribute to performance of the clothing system during wear under cold conditions. Selected properties of the constituent fabrics were found to provide limited insight into how garments perform during wear under the conditions of this study.

Geothermobarometry for ultramafic assemblages from the Emeishan Large Igneous Province, Southwest China and the Nikos and Zulu Kimberlites, Nunavut, Canada

NASA Astrophysics Data System (ADS)

Zhao, D.

2009-05-01

To understand and contrast the origins of ultramafic assemblages from basaltic and kimberlitic rocks and their associated deposits, such as V-Ti magnetite and Ni-Cu-(PGE) sulfide deposits and diamond, applicable thermobarometers were evaluated and applied to the ultramafic assemblages from the Emeishan Large Igneous Province (ELIP), Southwest China and from the Nikos and Zulu Kimberlites of Nunavut, Canada. The ELIP is located in the Yangtze Block, Southwest China and composed of Permian Emeishan Flood basalt (EFB) and associated layered mafic-ultramafic intrusions. Some of these intrusions host V-Ti magnetite deposits; while others contain Ni-Cu-(PGE) sulfide deposits. It is not clear why some intrusions host magnetite deposits and others contain sulfide deposits. The P-T conditions for the ultramafic assemblages from the mafic-ultramafic intrusions in the ELIP were calculated in order to understand the origins and the associated mineral deposits. The ultramafic assemblages are peridotite, olivine pyroxenite, pyroxenite in the layered intrusions and the common minerals include spinel, olivine, clinopyroxene, orthopyroxene, and minor magnetite and ilmenite. Using a two pyroxene thermometer and a Ca-Mg exchange barometer between olivine and clinopyroxene, a spinel-olivine-clinopyroxene-orthopyroxene assemblage from the Xinjie intrusion yields a T-P of 905°C and 17 kbar; and a similar assemblage from the Jinbaoshan intrusion yields a T-P of 1124°C and 31 kbar. The Nikos kimberlite, near Elwin Bay on Somerset Island, is located at the northeast end of the northeast-southwest kimberlite zone; and the Zulu kimberlite is located on the neighboring Brodeur Peninsula of Baffin Island, Nunavut. The ultramafic assemblages from the Canadian Kimberlites include garnet lherzolite, garnet-spinel lherzolite, spinel lherzolite, dunite, garnet websterite, spinel websterite and garnet clinopyroxenite. The calculated P-T conditions are in the range of 760 to 1180°C and 25 to 60 kbar, follow a continental geotherm, and overlap the stability field of diamond. The ultramafic assemblages from the ELIP, Southwest China and from the Canadian Kimberlites were sampled from different depths in the lithosphere.

Petrogenesis of incipient charnockite in the Ikalamavony sub-domain, south-central Madagascar: New insights from phase equilibrium modeling

NASA Astrophysics Data System (ADS)

Endo, Takahiro; Tsunogae, Toshiaki; Santosh, M.; Shaji, E.; Rambeloson, Roger A.

2017-06-01

Incipient charnockites representing granulite formation on a mesoscopic scale occur in the Ambodin Ifandana area of Ikalamavony sub-domain in south-central Madagascar. Here we report new petrological data from these rocks, and discuss the process of granulite formation on the basis of petrography, mineral equilibrium modeling, and fluid inclusion studies. The incipient charnockites occur as brownish patches, lenses, and layers characterized by an assemblage of biotite + orthopyroxene + K-feldspar + plagioclase + quartz + magnetite + ilmenite within host orthopyroxene-free biotite gneiss with an assemblage of biotite + K-feldspar + plagioclase + quartz + magnetite + ilmenite. Lenses and layers of calc-silicate rock (clinopyroxene + garnet + plagioclase + quartz + titanite + calcite) are typically associated with the charnockite. Coarse-grained charnockite occurs along the contact between the layered charnockite and calc-silicate rock. The application of mineral equilibrium modeling on the mineral assemblages in charnockite and biotite gneiss employing the NCKFMASHTO system as well as fluid inclusion study on coarse-grained charnockite defines a P-T range of 8.5-10.5 kbar and 880-900 °C, which is nearly consistent with the inferred P-T condition of the Ikalamavony sub-domain (8.0-10.5 kbar and 820-880 °C). The result of T versus H2O activity (a(H2O)) modeling demonstrates that orthopyroxene-bearing assemblage in charnockite is stable under relatively low a(H2O) condition of 0.42-0.43, which is consistent with the popular models of incipient-charnockite formation related to the lowering of water activity and stabilization of orthopyroxene through dehydration of biotite. The occurrence of calc-silicate rocks adjacent to the charnockite suggests that the CO2-bearing fluid that caused dehydration and incipient-charnockite formation might have been derived through decarbonation of calc-silicate rocks during the initial stage of decompression slightly after the peak metamorphism. The calc-silicate rocks might have also behaved as a cap rock that trapped CO2 infiltrated from an external source. 'CO2-rich fluid ponds' formed beneath calc-silicate layers could have enhanced dehydration of biotite to orthopyroxene, and produced layers of coarse-grained charnockite adjacent to calc-silicate layers.

5m RPV for Exploring Joined Wing Gust Response

DTIC Science & Technology

2009-12-01

an outer layer of light glass scrim used as the first layer. Varying layers of carbon cloth are used and then the core material is added. In this...for various angles of attack and sideslip angles. A parametric model is developed using Phoenix Integration’s Model Center Software (MC). This model...by the ground control software and finally a piece of real-time footage taken from the on-board, gimbaled camera. 2009 Progress Report 27

Verification and validation of an advanced model of heat and mass transfer in the protective clothing

NASA Astrophysics Data System (ADS)

Łapka, Piotr; Furmański, Piotr

2018-04-01

The paper presents verification and validation of an advanced numerical model of heat and moisture transfer in the multi-layer protective clothing and in components of the experimental stand subjected to either high surroundings temperature or high radiative heat flux emitted by hot objects. The developed model included conductive-radiative heat transfer in the hygroscopic porous fabrics and air gaps as well as conductive heat transfer in components of the stand. Additionally, water vapour diffusion in the pores and air spaces as well as phase transition of the bound water in the fabric fibres (sorption and desorption) were accounted for. All optical phenomena at internal or external walls were modelled and the thermal radiation was treated in the rigorous way, i.e., semi-transparent absorbing, emitting and scattering fabrics with the non-grey properties were assumed. The air was treated as transparent. Complex energy and mass balances as well as optical conditions at internal or external interfaces were formulated in order to find values of temperatures, vapour densities and radiation intensities at these interfaces. The obtained highly non-linear coupled system of discrete equations was solved by the Finite Volume based in-house iterative algorithm. The developed model passed discretisation convergence tests and was successfully verified against the results obtained applying commercial software for simplified cases. Then validation was carried out using experimental measurements collected during exposure of the protective clothing to high radiative heat flux emitted by the IR lamp. Satisfactory agreement of simulated and measured temporal variation of temperature at external and internal surfaces of the multi-layer clothing was attained.

Heat strain in cold.

PubMed

Rintamäki, Hannu; Rissanen, Sirkka

2006-07-01

In spite of increased environmental cold stress, heat strain is possible also in a cold environment. The body heat balance depends on three factors: environmental thermal conditions, metabolic heat production and thermal insulation of clothing and other protective garments. As physical exercise may increase metabolic heat production from rest values by ten times or even more, the required thermal insulation of clothing may vary accordingly. However, in most outdoor work, and often in indoor cold work, too, the thermal insulation of clothing is impractical, difficult or impossible to adjust according to the changes in physical activity. This is especially true with whole body covering garments like chemical protective clothing. As a result of this imbalance, heat strain may develop. In cold all the signs of heat strain (core temperature above 38 degrees C, warm or hot thermal sensations, increased cutaneous circulation and sweating) may not be present at the same time. Heat strain in cold may be whole body heat strain or related only to torso or core temperature. Together with heat strain in torso or body core, there can be at the same time even cold strain in peripheral parts and/or superficial layers of the body. In cold environment both the preservation of insulation and facilitation of heat loss are important. Development of clothing design is still needed to allow easy adjustments of thermal insulation.

New Stagnation Arc Jet Model Design for Testing ADEPT 3-D Carbon Cloth

NASA Technical Reports Server (NTRS)

Beck, R.; Chen, Y.-K.; Wercinski, P.; Agrawal, P.; Chavez-Garcia, J.

2017-01-01

The ADEPT concept has been considered as an entry, descent and landing system to enable Human Mars class missions. Ground rules for the Mars studies required aerocapture, orbit, and then entry. The design utilizes a 3-D woven carbon cloth fabric as both heatshield and primary structure and design guidelines required 6 layers remaining after all entry events. The peak heating predicted for the ADEPT carbon cloth was 35 Wcm2 and resulting temperatures were predicted to be 1400K. Predictions for carbon mass loss were performed using equilibrium thermochemistry, which is only accurate for T2000K. Carbon oxidation is kinetically controlled at T2000K, and mass loss drops off considerably from equilibrium values. Design of the cloth thickness and mass would be significantly reduced if kinetics were considered. This effort was to design a stagnation test article design that could be used in the AHF with varying levels of oxygen where the results could be used to develop an engineering model to describe the recession rate of the carbon as a function of the partial pressure of monotomic oxygen.

A physiologically based mathematical model of dermal absorption in man.

PubMed

Auton, T R; Westhead, D R; Woollen, B H; Scott, R C; Wilks, M F

1994-01-01

A sound understanding of the mechanisms determining percutaneous absorption is necessary for toxicological risk assessment of chemicals contacting the skin. As part of a programme investigating these mechanisms we have developed a physiologically based mathematical model. The structure of the model parallels the multi-layer structure of the skin, with separate surface, stratum corneum and viable tissue layers. It simulates the effects of partitioning and diffusive transport between the sub-layers, and metabolism in the viable epidermis. In addition the model describes removal processes on the surface of the skin, including the effects of washing and desquamation, and rubbing off onto clothing. This model is applied to data on the penetration of the herbicide fluazifop-butyl through human skin in vivo and in vitro. Part of this dataset is used to estimate unknown model parameter values and the remainder is used to provide a partial validation of the model. Only a small fraction of the applied dose was absorbed through the skin; most of it was removed by washing or onto clothing. The model provides a quantitative description of these loss processes on the skin surface.

Radiocarbon dates from the Grotte du Renne and Saint-Césaire support a Neandertal origin for the Châtelperronian

PubMed Central

Hublin, Jean-Jacques; Talamo, Sahra; Julien, Michèle; David, Francine; Connet, Nelly; Bodu, Pierre; Vandermeersch, Bernard; Richards, Michael P.

2012-01-01

The transition from the Middle Paleolithic (MP) to Upper Paleolithic (UP) is marked by the replacement of late Neandertals by modern humans in Europe between 50,000 and 40,000 y ago. Châtelperronian (CP) artifact assemblages found in central France and northern Spain date to this time period. So far, it is the only such assemblage type that has yielded Neandertal remains directly associated with UP style artifacts. CP assemblages also include body ornaments, otherwise virtually unknown in the Neandertal world. However, it has been argued that instead of the CP being manufactured by Neandertals, site formation processes and layer admixture resulted in the chance association of Neanderthal remains, CP assemblages, and body ornaments. Here, we report a series of accelerator mass spectrometry radiocarbon dates on ultrafiltered bone collagen extracted from 40 well-preserved bone fragments from the late Mousterian, CP, and Protoaurignacian layers at the Grotte du Renne site (at Arcy-sur-Cure, France). Our radiocarbon results are inconsistent with the admixture hypothesis. Further, we report a direct date on the Neandertal CP skeleton from Saint-Césaire (France). This date corroborates the assignment of CP assemblages to the latest Neandertals of western Europe. Importantly, our results establish that the production of body ornaments in the CP postdates the arrival of modern humans in neighboring regions of Europe. This new behavior could therefore have been the result of cultural diffusion from modern to Neandertal groups. PMID:23112183

Microfibrous metallic cloth for acoustic isolation of a MEMS gyroscope

NASA Astrophysics Data System (ADS)

Dean, Robert; Burch, Nesha; Black, Meagan; Beal, Aubrey; Flowers, George

2011-04-01

The response of a MEMS device that is exposed to a harsh environment may range from an increased noise floor to a completely erroneous output to temporary or even permanent device failure. One such harsh environment is high power acoustic energy possessing high frequency components. This type of environment sometimes occurs in small aerospace vehicles. In this type of operating environment, high frequency acoustic energy can be transferred to a MEMS gyroscope die through the device packaging. If the acoustic noise possesses a sufficiently strong component at the resonant frequency of the gyroscope, it will overexcite the motion of the proof mass, resulting in the deleterious effect of corrupted angular rate measurement. Therefore if the device or system packaging can be improved to sufficiently isolate the gyroscope die from environmental acoustic energy, the sensor may find new applications in this type of harsh environment. This research effort explored the use of microfibrous metallic cloth for isolating the gyroscope die from environmental acoustic excitation. Microfibrous cloth is a composite of fused, intermingled metal fibers and has a variety of typical uses involving chemical processing applications and filtering. Specifically, this research consisted of experimental evaluations of multiple layers of packed microfibrous cloth composed of sintered nickel material. The packed cloth was used to provide acoustic isolation for a test MEMS gyroscope, the Analog Devices ADXRS300. The results of this investigation revealed that the intermingling of the various fibers of the metallic cloth provided a significant contact area between the fiber strands and voids, which enhanced the acoustic damping of the material. As a result, the nickel cloth was discovered to be an effective acoustic isolation material for this particular MEMS gyroscope.

SU-E-T-193: FMEA Severity Scores - Do We Really Know?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khan, A; Robertson, JD; Narra, V

2014-06-01

Purpose: Mycosis fungoides is a common form of cutaneous T-cell lymphoma which generally affects the skin. A typical course of treatment may include fractionated total skin electron beam therapy. Given the difficulties in uniformly irradiating some regions of the body and the need for frequent visits within the context of a fractionated protocol, this study investigated the feasibility of delivering the dose using form-fitting cloth which contained phosphorous-32 as a source for beta particle irradiation. Methods: A piece of fabric (0.97 g) consisting of a blend of spandex and flame retardant material impregnated with phosphorus-31 (2000 ppm) was bombarded withmore » neutrons to produce phosphorus-32. The cloth was then laid flat and a stack of radiochromic film placed on top. Sheets of film and tissue equivalent plastic were layered to form a stack measuring a total of 1 cm thickness and remained sandwiched for 77.3 hr. Results: The initial activity of the activated cloth was 44 μCi of P-32. The absorbed dose was uniform within planes parallel to the cloth and exponentially dependent on depth, delivering 560cGy at 0.3mm and falling to 20cGy at 3mm. Conclusion: The total dose prescribed for a typical course of TSET for mycosis fungoides is 36Gy delivered over 9 weeks and is expected to treat to at least 5mm depth. Therefore, the P-32 impregnated cloth may not be clinically indicated to treat this disease given the unfavorable depth-dose characteristics. However, a major advantage of using form-fitting cloth is the uniformity with which the dose could be delivered over the skin in areas which are not flat. Increasing the distance between cloth and skin could improve the depth-dose characteristics.« less

Unusual algal turfs associated with the rhodophyta Phyllophora crispa: Benthic assemblages along a depth gradient in the Central Mediterranean Sea

NASA Astrophysics Data System (ADS)

Bonifazi, Andrea; Ventura, Daniele; Gravina, Maria Flavia; Lasinio, Giovanna Jona; Belluscio, Andrea; Ardizzone, Gian Domenico

2017-02-01

Macroalgal assemblages dominated by the turf-forming alga Phyllophora crispa are described in detail for the first time in the Central Mediterranean Sea. This particular form of algal growth, which comprises an upper mixed layer of multiple algal species with a basal stratum formed by entangled thalli of P. crispa, was observed for the first time in 2012 along the promontory of Punta del Lazzaretto (Giglio Island, Italy). In this study, this assemblage was analysed to document the diversity of macroalgae and invertebrate associated communities and assess their distribution along a depth gradient. The algae forming turfs grow directly on the rock at low depth up to 10-15 m depth, while they grow above P. crispa from 15 m to 35 m depth, resulting in luxuriant beds covering up to 100% of the substrate. Multivariate analysis revealed clear differences regarding algae and invertebrate species richness and abundance between shallow and deep strata because of the dominance of Phyllophora crispa at depths greater than 20 m. The long laminal thalli of P. crispa favoured sessile fauna colonization, while the vagile species were principally linked to the architectural complexity of the turf layer created by the P. crispa, which increased the microhabitat diversity and favoured sediment deposition within the turf layer. The complex structures of these turf assemblages and their widespread distribution along the whole coast of the island suggest a well-established condition of the communities linked to the high natural sedimentation rate observed in the area.

4 Types of Exercise, Endurance | NIH MedlinePlus the Magazine

MedlinePlus

... this page please turn Javascript on. Feature: Go4Life Exercising for Endurance Past Issues / Spring 2012 Table of ... that makes you sweat. Dress in layers when exercising outdoors so you can add or remove clothes ...

Adjustable high emittance gap filler. [reentry shielding for space shuttle vehicles

NASA Technical Reports Server (NTRS)

Leiser, D. B.; Stewart, D. A.; Smith, M.; Estrella, C. A.; Goldstein, H. E. (Inventor)

1981-01-01

A flexible, adjustable refractory filler is disclosed for filling gaps between ceramic tiles forming the heat shield of a space shuttle vehicle, to protect its aluminum skin during atmospheric reentry. The easily installed and replaced filler consists essentially of a strip of ceramic cloth coated, at least along both its longitudinal edges with a room temperature vulcanizable silicone rubber compound with a high emittance colored pigment. The filler may have one or more layers as the gap width requires. Preferred materials are basket weave aluminoborosilicate cloth, and a rubber compounded with silicon tetraboride as the emittance agent and finely divided borosilicate glass containing about 7.5% B2O3 as high temperature binder. The filler cloth strip or tape is cut to proper width and length, inserted into the gap, and fastened with previously applied drops of silicone rubber adhesive.

Textile electrode characterization: dependencies in the skin-clothing-electrode interface

NASA Astrophysics Data System (ADS)

Macías, R.; Fernández, M.; Bragós, R.

2013-04-01

Given the advances in the technology known as smart textiles, the use of textile electrodes is more and more common. However this kind of electrodes presents some differences regarding the standard ones as the Ag-AgCl electrodes. Therefore to characterize them as best as possible is required. In order to make the characterization reproducible and repetitive, a skin dummy made of agar-agar and a standardized measurement set-up is used in this article. Thus, some dependencies in the skin-electrode interface are described. These dependencies are related to the surface of the textile electrode, the conductive material and the applied pressure. Furthermore, the dependencies on clothing in the skin-textile electrode interface are also analyzed. Thus, based on some parameters such as textile material, width and number of layers, the behavior of the interface made up by the skin, the textile electrode and clothing is depicted.

Time of death of victims found in cold water environment.

PubMed

Karhunen, Pekka J; Goebeler, Sirkka; Winberg, Olli; Tuominen, Markku

2008-04-07

Limited data is available on the application of post-mortem temperature methods to non-standard conditions, especially in problematic real life cases in which the body of the victim is found in cold water environment. Here we present our experience on two cases with known post-mortem times. A 14-year-old girl (rectal temperature 15.5 degrees C) was found assaulted and drowned after a rainy cold night (+5 degrees C) in wet clothing (four layers) at the bottom of a shallow ditch, lying in non-flowing water. The post-mortem time turned out to be 15-16 h. Four days later, at the same time in the morning, after a cold (+/- 0 degrees C) night, a young man (rectal temperature 10.8 degrees C) was found drowned in a shallow cold drain (+4 degrees C) wearing similar clothing (four layers) and being exposed to almost similar environmental and weather conditions, except of flow (7.7 l/s or 0.3 m/s) in the drain. The post-mortem time was deduced to be 10-12 h. We tested the applicability of five practical methods to estimate time of death. Henssge's temperature-time of death nomogram method with correction factors was the most versatile and gave also most accurate results, although there is limited data on choosing of correction factors. In the first case, the right correction factor was close to 1.0 (recommended 1.1-1.2), suggesting that wet clothing acted like dry clothing in slowing down body cooling. In the second case, the right correction factor was between 0.3 and 0.5, similar to the recommended 0.35 for naked bodies in flowing water.

Demonstration and Validation of a Fractured Rock Passive Flux Meter

DTIC Science & Technology

2015-04-01

Thick continuous lines are stream lines and thin dashed lines are potential lines. Green lines are isochrones, i.e., dye , tracer or contaminant...layer of cloth material impregnated with a visible dye . The core inflates separately from the two end packers to provide a mechanism for holding the one...leaches visible dyes and tracers from the internal and external sorbent layers and produces residual dye and tracer distributions. Visual

High-Altitude Hydration System

NASA Technical Reports Server (NTRS)

Parazynski, Scott E.; Orndoff, Evelyne; Bue, Grant C.; Schaefbauer, Mark E.; Urban, Kase

2010-01-01

Three methods are being developed for keeping water from freezing during high-altitude climbs so that mountaineers can remain hydrated. Three strategies have been developed. At the time of this reporting two needed to be tested in the field and one was conceptual. The first method is Passive Thermal Control Using Aerogels. This involves mounting the fluid reservoir of the climber s canteen to an inner layer of clothing for better heat retention. For the field test, bottles were mounted to the inner fleece layer of clothing, and then aerogel insulation was placed on the outside of the bottle, and circumferentially around the drink straw. When climbers need to drink, they can pull up the insulated straw from underneath the down suit, take a sip, and then put it back into the relative warmth of the suit. For the field test, a data logger assessed the temperatures of the water reservoir, as well as near the tip of the drink straw. The second method is Passive Thermal Control with Copper-Shielded Drink Straw and Aerogels, also mounted to inner layers of clothing for better heat retention. Braided wire emanates from the inside of the fleece jacket layer, and continues up and around the drink straw in order to use body heat to keep the system-critical drink straw warm enough to keep water in the liquid state. For the field test, a data logger will be used to compare this with the above concept. The third, and still conceptual, method is Active Thermal Control with Microcontroller. If the above methods do not work, microcontrollers and tape heaters have been identified that could keep the drink straw warm even under extremely cold conditions. Power requirements are not yet determined because the thermal environment inside the down suit relative to the external environment has not been established. A data logger will be used to track both the external and internal temperatures of the suit on a summit day.

Resistance of gloves and protective clothing materials to permeation of cytostatic solutions.

PubMed

Krzemińska, Sylwia; Pośniak, Małgorzata; Szewczyńska, Małgorzata

2018-01-15

The objective of the work was to determine the resistance of selected protective clothing and glove materials to permeation of cytostatics such as docetaxel, fluorouracil, and doxorubicin. The following glove materials were used: natural rubber latex (code A), acrylonitrile-butadiene rubber (code B) and chloroprene rubber (code C). In addition, we tested a layered material composed of a non-woven polyester (PES), a polypropylene (PP) film, and a non-woven PP used for protective coats (code D). The cytostatics were analyzed by liquid chromatography with diode array detection. The tested samples were placed in a purpose-built permeation cell modified to be different from that specified in the standard EN 6529:2001. The tested materials were characterized by good resistance to solutions containing 2 out of the 3 selected cytostatics: doxorubicin and 5-fluorouracil, as indicated by a breakthrough time of over 480 min. Equally high resistance to permeation of the third cytostatic (docetaxel) was exhibited by natural rubber latex, acrylonitrile-butadiene rubber, and chloroprene rubber. However, docetaxel permeated much more readily through the clothing layered material, compromising its barrier properties. It was found that the presence of additional components in cytostatic preparations accelerated permeation through material samples, thus deteriorating their barrier properties. Int J Occup Med Environ Health 2018;31(3):341-350. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

The Pipe Creek Sinkhole biota, a diverse late tertiary continental fossil assemblage from Grant County, Indiana

USGS Publications Warehouse

Farlow, J.O.; Sunderman, J.A.; Havens, J.J.; Swinehart, A.L.; Holman, J.A.; Richards, R.L.; Miller, N.G.; Martin, R.A.; Hunt, R.M.; Storrs, G.W.; Curry, B. Brandon; Fluegeman, R.H.; Dawson, M.; Flint, M.E.T.

2001-01-01

Quarrying in east-central Indiana has uncovered richly fossiliferous unconsolidated sediment buried beneath Pleistocene glacial till. The fossiliferous layer is part of a sedimentary deposit that accumulated in a sinkhole developed in the limestone flank beds of a Paleozoic reef. Plant and animal (mostly vertebrate) remains are abundant in the fossil assemblage. Plants are represented by a diversity of terrestrial and wetland forms, all of extant species. The vertebrate assemblage (here designated the Pipe Creek Sinkhole local fauna) is dominated by frogs and pond turtles, but fishes, birds; snakes and small and large mammals are also present; both extinct and extant taxa are represented. The mammalian assemblage indicates an early Pliocene age (latest Hemphillian or earliest Blancan North American Land Mammal Age). This is the first Tertiary continental biota discovered in the interior of the eastern half of North America.

Application of waterproof breathable fabric in thermal protective clothing exposed to hot water and steam

NASA Astrophysics Data System (ADS)

Su, Y.; Li, R.; Song, G.; Li, J.

2017-10-01

A hot water and steam tester was used to examine thermal protective performance of waterproof and breathable fabric against hot water and steam hazards. Time to cause skin burn and thermal energy absorbed by skin during exposure and cooling phases was employed to characterize the effect of configuration, placing order and properties of waterproof and breathable fabric on the thermal protective performance. The difference of thermal protective performance due to hot water and steam hazards was discussed. The result showed that the configuration of waterproof and breathable fabric presented a significant effect on the thermal protective performance of single- and double-layer fabric system, while the difference between different configurations in steam hazard was greater than that in hot water hazard. The waterproof and breathable fabric as outer layer provided better protection than that as inner layer. Increasing thickness and moisture regain improved the thermal protective performance of fabric system. Additionally, the thermal energy absorbed by skin during the cooling phase was affected by configuration, thickness and moisture regain of fabric. The findings will provide technical data to improve performance of thermal protective clothing in hot water and steam hazards.

Response of rocky invertebrate diversity, structure and function to the vertical layering of vegetation

NASA Astrophysics Data System (ADS)

Bustamante, María; Tajadura, Javier; Gorostiaga, José María; Saiz-Salinas, José Ignacio

2014-06-01

Macroalgae comprise a prominent part of the rocky benthos where many invertebrates develop, and are believed to be undergoing severe declines worldwide. In order to investigate how the vegetation structure (crustose, basal and canopy layers) contributes to the diversity, structure and function of benthic invertebrates, a total of 31 subtidal transects were sampled along the northeast Atlantic coast of Spain. Significant positive relationships were found between the canopy layer and faunal abundance, taxonomic diversity and functional group diversity. Canopy forming algae were also related to epiphytic invertebrates, medium size forms, colonial strategy and suspensivores. By contrast, basal algae showed negative relationships with all variables tested except for detritivores. Multivariate multiple regression analyses (DISTLM) point to crustose as well as canopy layers as the best link between seaweeds and invertebrate assemblage structure. A close relationship was found between taxonomic and functional diversities. In general, low levels of taxonomic redundancy were detected for functional groups correlated with vegetation structure. A conceptual model based on the results is proposed, describing distinct stages of invertebrate assemblages in relation to the vertical structure of vegetation.

Heat reflecting tape for thermoelectric converter

DOEpatents

Purdy, David L.

1977-01-01

Threads are interlaced with thermoelectric wires to provide a woven cloth in tape form, there being an intermediate layer of heat radiation reflecting material (e.g., aluminum foil) insulated electrically from said wires, which are of opposite thermoelectric polarity and connected as a plurality of thermocouples.

Designed porosity materials in nuclear reactor components

DOEpatents

Yacout, A. M.; Pellin, Michael J.; Stan, Marius

2016-09-06

A nuclear fuel pellet with a porous substrate, such as a carbon or tungsten aerogel, on which at least one layer of a fuel containing material is deposited via atomic layer deposition, and wherein the layer deposition is controlled to prevent agglomeration of defects. Further, a method of fabricating a nuclear fuel pellet, wherein the method features the steps of selecting a porous substrate, depositing at least one layer of a fuel containing material, and terminating the deposition when the desired porosity is achieved. Also provided is a nuclear reactor fuel cladding made of a porous substrate, such as silicon carbide aerogel or silicon carbide cloth, upon which layers of silicon carbide are deposited.

The Chemistry of Impacting Bodies Recorded on EURECA

NASA Astrophysics Data System (ADS)

Wright, I. P.; Grady, M. M.; Sexton, A.

1995-09-01

The European Retrievable Satellite (EURECA) was in orbit at an altitude of 500km for 11 months. After recovery, the multi-layer thermal insulation blankets (MLI) covering the craft were removed and scanned for signs of micrometeoroid impacts. A total of ~29m^2 of the blankets was surveyed, (~37% of the surface) [1]. Further examination indicated that there were 59 penetration features, ranging in diameter from ~1200 micrometers down to ~60 micrometers [2]; holes of smaller dimensions cannot be detected in MLI, due to the structure of the topmost surface (beta-cloth, made from woven fibres of Teflon-coated glass fibre. a Si-, Al- and Ca-rich material). We have now completed EDAX-SEM analysis of residual material associated with the impacts, and have attempted to classify the residues and thus ascertain the relative proportions of holes produced by natural micrometeoroids and space debris. The multi-layered nature of the blankets allowed impacting particles to decelerate progressively and thus be captured. Particles were readily detected within most blankets, and individual penetration features often contained many particles, frequently with differing compositions, and at various levels within the blanket structure. Particles were not always close to an impact feature. In Type 6 MLI, (the most common blanket-type on EURECA, with 22 layers), there is a positive correlation between the diameter of the impact hole in the beta-cloth and the number of layers subsequently penetrated (mainly Al foil). This observation is consistent with the largest holes being made by the particles with the highest energy. The criteria used to assess the possible origins of the residual material were those of Zolensky et al. [3]. Analysis (see table) indicated that 7% of the particles were natural micrometeoroids, and 43% were pieces of beta-cloth carried into the intenor of the blankets as a result of impacts. The remainder was space debris. Normalizing the analyses to a "per hole" basis, S impacts were produced by natural micrometeoroids and 20 by space debris. The remaining 34 holes could not be assigned a specific origin. Space debris occurred as paint flakes, rocket propellant, fragments of electronic components and spacecraft materials, in addition to inorganic salts, possibly from astronaut waste. The search for residues of natural origin was hampered by the presence of shattered fragments and melted pieces of beta-cloth. The material believed to be of possible natural origin was present as Mg-silicate (at 2 sites), and one occurrence each of Fe, Mg-silicate, Ti, Al-silicate and Fe, Ni metal. It is clear from the results of this study that beta-cloth is not an ideal surface for the recovery of natural micrometeoroid debris for further investigation. References: [1] Aceti R. et al. (1994) ESA Bulletin, 80, 21-26. [2] Grady M. M. et al. (1995) LPS XXVI, 485-486. [3] Zolensky M. E. et al. (1993) LDEF--69 Months in Space, Second Post-Retrieval Symposium, 277-302.

Fault-related fold styles and progressions in fold-thrust belts: Insights from sandbox modeling

NASA Astrophysics Data System (ADS)

Yan, Dan-Ping; Xu, Yan-Bo; Dong, Zhou-Bin; Qiu, Liang; Zhang, Sen; Wells, Michael

2016-03-01

Fault-related folds of variable structural styles and assemblages commonly coexist in orogenic belts with competent-incompetent interlayered sequences. Despite their commonality, the kinematic evolution of these structural styles and assemblages are often loosely constrained because multiple solutions exist in their structural progression during tectonic restoration. We use a sandbox modeling instrument with a particle image velocimetry monitor to test four designed sandbox models with multilayer competent-incompetent materials. Test results reveal that decollement folds initiate along selected incompetent layers with decreasing velocity difference and constant vorticity difference between the hanging wall and footwall of the initial fault tips. The decollement folds are progressively converted to fault-propagation folds and fault-bend folds through development of fault ramps breaking across competent layers and are followed by propagation into fault flats within an upper incompetent layer. Thick-skinned thrust is produced by initiating a decollement fault within the metamorphic basement. Progressive thrusting and uplifting of the thick-skinned thrust trigger initiation of the uppermost incompetent decollement with formation of a decollement fold and subsequent converting to fault-propagation and fault-bend folds, which combine together to form imbricate thrust. Breakouts at the base of the early formed fault ramps along the lowest incompetent layers, which may correspond to basement-cover contacts, domes the upmost decollement and imbricate thrusts to form passive roof duplexes and constitute the thin-skinned thrust belt. Structural styles and assemblages in each of tectonic stages are similar to that in the representative orogenic belts in the South China, Southern Appalachians, and Alpine orogenic belts.

Autumn larval fish assemblages in the northwest African Atlantic coastal zone

NASA Astrophysics Data System (ADS)

Abdelouahab, Hinde; Berraho, Amina; Baibai, Tarik; Agouzouk, Aziz; Makaoui, Ahmed; Errhif, Ahmed

2017-05-01

A study on the assemblage composition and vertical distribution of larval fish was conducted in the southern area of the Moroccan Atlantic coast in Autumn 2011. A total of 1 680 fish larvae taxa were identified from 21 families. The majority of the larvae were present in the upper layers. Clupeids were the most abundant larvae taxa followed by Myctophidae, Gadidae and Sparidae, hence the larval fish assemblages (LFA) were variable in diff erent depth layers. Total fish larvae showed a preference for surface layers, and were mainly found above 75 m depth, with some exceptions. The maximum concentration of fish larvae was concentrated up to 25 m essentially above the thermocline, where chlorophyll a and mesozooplankton were abundant. Spatially, neritic families were located near the coast and at some off shore stations especially in the northern part, while oceanic families were more distributed towards off shore along the study area. Cluster analysis showed a segregation of two groups of larvae. However, a clear separation between neritic families and oceanic families was not found. Multivariate analysis highlighted the relationship between the distribution of larvae of diff erent families and environmental parameters. Temperature and salinity seem to have been the factors that acted on associations of fish larvae. Day/night vertical distributions suggest there was not a very significant vertical migration, probably due to adequate light levels for feeding.

Reversible Humidity Sensitive Clothing for Personal Thermoregulation

PubMed Central

Zhong, Ying; Zhang, Fenghua; Wang, Meng; Gardner, Calvin J.; Kim, Gunwoo; Liu, Yanju; Leng, Jinsong; Jin, Sungho; Chen, Renkun

2017-01-01

Two kinds of humidity-induced, bendable smart clothing have been designed to reversibly adapt their thermal insulation functionality. The first design mimics the pores in human skin, in which pre-cut flaps open to produce pores in Nafion sheets when humidity increases, as might occur during human sweating thus permitting air flow and reducing both the humidity level and the apparent temperature. Like the smart human sweating pores, the flaps can close automatically after the perspiration to keep the wearer warm. The second design involves thickness adjustable clothes by inserting the bent polymer sheets between two fabrics. As the humidity increases, the sheets become thinner, thus reducing the gap between the two fabrics to reduce the thermal insulation. The insulation layer can recover its original thickness upon humidity reduction to restore its warmth-preservation function. Such humidity sensitive smart polymer materials can be utilized to adjust personal comfort, and be effective in reducing energy consumption for building heating or cooling with numerous smart design. PMID:28281646

Reversible Humidity Sensitive Clothing for Personal Thermoregulation

NASA Astrophysics Data System (ADS)

Zhong, Ying; Zhang, Fenghua; Wang, Meng; Gardner, Calvin J.; Kim, Gunwoo; Liu, Yanju; Leng, Jinsong; Jin, Sungho; Chen, Renkun

2017-03-01

Two kinds of humidity-induced, bendable smart clothing have been designed to reversibly adapt their thermal insulation functionality. The first design mimics the pores in human skin, in which pre-cut flaps open to produce pores in Nafion sheets when humidity increases, as might occur during human sweating thus permitting air flow and reducing both the humidity level and the apparent temperature. Like the smart human sweating pores, the flaps can close automatically after the perspiration to keep the wearer warm. The second design involves thickness adjustable clothes by inserting the bent polymer sheets between two fabrics. As the humidity increases, the sheets become thinner, thus reducing the gap between the two fabrics to reduce the thermal insulation. The insulation layer can recover its original thickness upon humidity reduction to restore its warmth-preservation function. Such humidity sensitive smart polymer materials can be utilized to adjust personal comfort, and be effective in reducing energy consumption for building heating or cooling with numerous smart design.

Reversible Humidity Sensitive Clothing for Personal Thermoregulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhong, Ying; Zhang, Fenghua; Wang, Meng

Two kinds of humidity-induced, bendable smart clothing have been designed to reversibly adapt their thermal insulation functionality. The first design mimics the pores in human skin, in which pre-cut flaps open to produce pores in Nafion sheets when humidity increases, as might occur during human sweating thus permitting air flow and reducing both the humidity level and the apparent temperature. Like the smart human sweating pores, the flaps can close automatically after the perspiration to keep the wearer warm. The second design involves thickness adjustable clothes by inserting the bent polymer sheets between two fabrics. As the humidity increases, themore » sheets become thinner, thus reducing the gap between the two fabrics to reduce the thermal insulation. The insulation layer can recover its original thickness upon humidity reduction to restore its warmth-preservation function. Such humidity sensitive smart polymer materials can be utilized to adjust personal comfort, and be effective in reducing energy consumption for building heating or cooling with numerous smart design.« less

Reversible Humidity Sensitive Clothing for Personal Thermoregulation

DOE PAGES

Zhong, Ying; Zhang, Fenghua; Wang, Meng; ...

2017-03-10

Two kinds of humidity-induced, bendable smart clothing have been designed to reversibly adapt their thermal insulation functionality. The first design mimics the pores in human skin, in which pre-cut flaps open to produce pores in Nafion sheets when humidity increases, as might occur during human sweating thus permitting air flow and reducing both the humidity level and the apparent temperature. Like the smart human sweating pores, the flaps can close automatically after the perspiration to keep the wearer warm. The second design involves thickness adjustable clothes by inserting the bent polymer sheets between two fabrics. As the humidity increases, themore » sheets become thinner, thus reducing the gap between the two fabrics to reduce the thermal insulation. The insulation layer can recover its original thickness upon humidity reduction to restore its warmth-preservation function. Such humidity sensitive smart polymer materials can be utilized to adjust personal comfort, and be effective in reducing energy consumption for building heating or cooling with numerous smart design.« less

Platinum-group mineralization at the margin of the Skaergaard intrusion, East Greenland

NASA Astrophysics Data System (ADS)

Andersen, Jens C. Ø.; Rollinson, Gavyn K.; McDonald, Iain; Tegner, Christian; Lesher, Charles E.

2017-08-01

Two occurrences of platinum-group elements (PGEs) along the northern margin of the Skaergaard intrusion include a sulfide-bearing gabbro with slightly less than 1 ppm PGE + Au and a clinopyroxene-actinolite-plagioclase-biotite-ilmenite schist with 16 vol% sulfide and 1.8 ppm PGE + Au. Both have assemblages of pyrrhotite, pentlandite, and chalcopyrite typical for orthomagmatic sulfides. Matching platinum-group mineral assemblages with sperrylite (PtAs2), kotulskite (Pd(Bi,Te)1-2), froodite (PdBi2), michenerite (PdBiTe), and electrum (Au,Ag) suggest a common origin. Petrological and geochemical similarities suggest that the occurrences are related to the Skaergaard intrusion. The Marginal Border Series locally displays Ni depletion consistent with sulfide fractionation, and the PGE fractionation trends of the occurrences are systematically enriched by 10-50 times over the chilled margin. The PGE can be explained by sulfide-silicate immiscibility in the Skaergaard magma with R factors of 110-220. Nickel depletion in olivine suggests that the process occurred within the host cumulate, and the low R factors require little sulfide mobility. The sulfide assemblages are different to the chalcopyrite-bornite-digenite assemblage found in the Skaergaard Layered Series and Platinova Reef. These differences can be explained by the early formation of sulfide melt, while magmatic differentiation or sulfur loss caused the unusual sulfide assemblage within the Layered Series. The PGEs indicate that the sulfides formed from the Skaergaard magma. The sulfides and PGEs could not have formed from the nearby Watkins Fjord wehrlite intrusion, which is nearly barren in sulfide. We suggest that silicate-sulfide immiscibility led to PGE concentration where the Skaergaard magma became contaminated with material from the Archean basement.

Temperature control transport system

DOEpatents

Schabron, John F; Sorini-Wong, Susan S

2014-12-09

Embodiments of the inventive technology may involve the use of layered, insulated PCM assemblage that itself comprises: modular insulating foam material 8 that, upon establishment as part of the assemblage, defines inner foam material sides 9 and outer foam material sides 10; thin reflective material 11 established against (whether directly in contact with or not) at least either the inner foam material sides or the outer foam materials sides, and modular, enclosed PCM sections 12 established between the modular insulating foam material and the interior center.

Optimization, Alternative Materials and Improvements in Body Armor Shields

DTIC Science & Technology

2007-05-10

performance structures such as protective clothing , bullet-proof vests and helmets due to their high-specific strength and stiffness. The ballistic...regard each layer of the woven composite as made of weft and warp yarns, and divide each yam into 3D solid elements. It is found that the frame...0.25 mm thick layers is modeled as an orthotropic material. Even though the woven composite armor is made of yams and each yarn is made of fibers

Altitudinal gradients of bryophyte diversity and community assemblage in southern Appalachian spruce-fir forests

Treesearch

Sarah E. Stehn; Christopher R. Webster; Janice M. Glime; Michael A. Jenkins

2010-01-01

Ground-layer plant communities in spruce-fir forests of the southern Appalachians have likely undergone significant change since the widespread death of canopy Fraser fir (Abies fraseri) caused by the exotic balsam woolly adelgid (Adelges piceae). Bryophytes comprise an important part of the ground-layer flora in the spruce-fir...

Heat stress control in the TMI-2 (Three Mile Island Unit 2) defueling and decontamination activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schork, J.S.; Parfitt, B.A.

During the initial stages of the Three Mile Island Unit 2 (TMI-2) defueling and decontamination activities for the reactor building, it was realized that the high levels of loose radioactive contamination would require the use of extensive protective clothing by entry personnel. While there was no doubt that layered protective clothing protects workers from becoming contaminated, it was recognized that these same layers of clothing would impose a very significant heat stress burden. To prevent the potentially serious consequences of a severe reaction to heat stress by workers in the hostile environment of the TMI-2 reactor building and yet maintainmore » the reasonable work productivity necessary to perform the recovery adequately, an effective program of controlling worker exposure to heat stress had to be developed. Body-cooling devices produce a flow of cool air, which is introduced close to the skin to remove body heat through convection and increased sweat evaporation. The cooling effect produced by the Vortex tube successfully protected the workers from heat stress, however, there were several logistical and operational problems that hindered extensive use of these devices. The last type of cooling garment examined was the frozen water garment (FWG) developed by Elizier Kamon at the Pennsylvania State University as part of an Electric Power Research Institute research grant. Personal protection, i.e., body cooling, engineering controls, and administrative controls, have been implemented successfully.« less

Mitigation of EMU Glove Cut Hazard by MMOD Impact Craters on Exposed ISS Handrails

NASA Technical Reports Server (NTRS)

Christiansen, Eric L.; Ryan, Shannon

2009-01-01

Recent cut damages to crewmember extravehicular mobility unit (EMU) gloves during extravehicular activity (EVA) onboard the International Space Station (ISS) has been found to result from contact with sharp edges or pinch points rather than general wear or abrasion. One possible source of cut-hazards are protruding sharp edged crater lips from impact of micrometeoroid and orbital debris (MMOD) particles on external metallic handrails along EVA translation paths. During impact of MMOD particles at hypervelocity an evacuation flow develops behind the shock wave, resulting in the formation of crater lips that can protrude above the target surface. In this study, two methods were evaluated to limit EMU glove cut-hazards due to MMOD impact craters. In the first phase, four flexible overwrap configurations are evaluated: a felt-reusable surface insulation (FRSI), polyurethane polyether foam with beta-cloth cover, double-layer polyurethane polyether foam with beta-cloth cover, and multi-layer beta-cloth with intermediate Dacron netting spacers. These overwraps are suitable for retrofitting ground equipment that has yet to be flown, and are not intended to protect the handrail from impact of MMOD particles, rather to act as a spacer between hazardous impact profiles and crewmember gloves. At the impact conditions considered, all four overwrap configurations evaluated were effective in limiting contact between EMU gloves and impact crater profiles. The multi-layer beta-cloth configuration was the most effective in reducing the height of potentially hazardous profiles in handrail-representative targets. In the second phase of the study, four material alternatives to current aluminum and stainless steel alloys were evaluated: a metal matrix composite, carbon fiber reinforced plastic (CFRP), fiberglass, and a fiber metal laminate. Alternative material handrails are intended to prevent the formation of hazardous damage profiles during MMOD impact and are suitable for flight hardware yet to be constructed. Of the four materials evaluated, only the fiberglass formed a less hazardous damage profile than the baseline metallic target. Although the CFRP laminate did not form any noticeable crater lip, brittle protruding fibers are considered a puncture risk. In parallel with EMU glove redesign efforts, modifications to metallic ISS handrails such as those evaluated in this study provide the means to significantly reduce cut-hazards from MMOD impact craters.

The effects of hydrological dynamics on benthic diatom community structure in a highly stratified estuary: The case of the Ebro Estuary (Catalonia, Spain)

NASA Astrophysics Data System (ADS)

Rovira, L.; Trobajo, R.; Leira, M.; Ibáñez, C.

2012-04-01

This study of the distribution of benthic diatom assemblages and their relationship with environmental factors in a highly stratified Mediterranean estuary, i.e. the Ebro Estuary, shows the importance of hydrological dynamics to explain the features of the diatom community in such an estuary, where river flow magnitude and fluctuations imply strong physicochemical variability especially in sites close to the sea. Eight sites along the estuary were sampled during 2007-2008 both at superficial and deep water layers, in order to gather both horizontal and vertical estuarine physicochemical and hydrological gradients. Canonical Variates Analysis and Hierarchical Cluster Analysis segregated diatom community in two assemblages depending on the dynamics of the salt-wedge. The diatom assemblages of riverine conditions (i.e. without salt-wedge influence) where characterised by high abundances of Cocconeis placentula var. euglypta and Amphora pediculus, meanwhile high abundances of Nizschia frustulum and Nitzschia inconspicua were characteristic of estuarine conditions (i.e. under salt-wedge influence). Redundancy Analysis showed that both diatom assemblages responded seasonally to Ebro River flows, especially in estuarine conditions, where fluctuating conditions affected diatom assemblages both at spatial and temporal scale.

Mola Art: Elementary

ERIC Educational Resources Information Center

Barsamian, Araxey

2004-01-01

In this brief article, the author describes a lesson plan on Mola art she used in her elementary classroom. Using four examples of Kuna Indian molas, the teacher introduced students to the beautiful, colorful, creative art form of molas. The Kuna women have been making these layered pieces of cloth for more than one hundred years. They use a…

High temperature ablation of kaolinite layered silicate/phenolic resin/asbestos cloth nanocomposite.

PubMed

Bahramian, Ahmad Reza; Kokabi, Mehrdad; Famili, Mohammad Hossein Navid; Beheshty, Mohammad Hossein

2008-01-15

The successful return of re-entry space vehicle, which is subjected to severe aerodynamic heating, is largely accompanied by some provisions to reduce the heat transfer to the structure. Heat shield is the best protection means which undergoes physical, chemical, and mostly endothermal transformations. The objective of this work is to investigate the ablating, charring, and thermal degradation behaviour of heat shield resol-type phenolic resin/kaolinite/asbestos cloth nanocomposite by oxyacetylene flame test with an external heat flux of 8 x 10(9)W/m(2) and 3000 K hot gas temperature and thermal analyzer techniques. Kinetic parameters of thermal degradation and temperature distribution at the back surface of the nanocomposite heat shield were determined and compared with that of composite counterpart.

The properties of weft knitted fabric medical and preventive treatment action using eco-raw materials

NASA Astrophysics Data System (ADS)

Halavska, L.; Batrak, O.

2016-07-01

A new trend in the world is the clothing production using the new types of ecological raw materials application - milk, pineapple, coconut, hemp, banana, eucalyptus, clams, corn, bamboo, soya, nettle yarn. This makes it possible to create textile materials of new generation with unique antibacterial and antiseptic properties. Such materials have a positive preventive and sometimes therapeutic effect on people, and their health. Eco-raw materials clothing is able to protect the human body from the environment harmful effects: cold, heat, rain, dust, opportunely remove from underclothing layer the steam and gases, sweat; maintain in underclothing layer the necessary microclimate for normal organism functioning. Study of knitwear consumer properties, produced with eco-materials, is an urgent task of the world vector, directed on ecological environmental protection. This paper presents the research results of hygroscopicity and capillarity weft knitted fabrics, what knitted from different types of eco-raw materials: bamboo yarn, yarn containing soybean and nettle yarn. Character of influence of the liquid raising level changes depending on the experiment time and the knitting structure is revealed.

Larval fish assemblages across an upwelling front: Indication for active and passive retention

NASA Astrophysics Data System (ADS)

Tiedemann, Maik; Brehmer, Patrice

2017-03-01

In upwelling areas, enrichment, concentration and retention are physical processes that have major consequences for larval fish survival. While these processes generally increase larval survival, strong upwelling can also increase mortality due to an offshore transport of larvae towards unfavorable habitats. In 2013 a survey was conducted along the Senegalese coast to investigate the upwelling effect with regard to larval fish assemblages and possible larval fish retention. According to water column characteristics two distinct habitats during an upwelling event were discriminated, i.e. the inshore upwelled water and the transition area over the deepest part of the Senegalese shelf. Along the two areas 42,162 fish larvae were collected representing 133 species within 40 families. Highest larval fish abundances were observed in the inshore area and decreasing abundances towards the transition, indicating that certain fish species make use of the retentive function of the inner shelf area as spawning grounds. Two larval fish assemblages overlap both habitats, which are sharply delimited by a strong upwelling front. One assemblage inhabited the inshore/upwelling area characterized by majorly neritic and pelagic species (Sparidae spp., Sardinella aurita), that seem to take the advantage of a passive retention on the shelf. The second assemblage consisted of a mix of pelagic and mesopelagic species (Engraulis encrasicolus, Carangidae spp. and Myctophidae spp.). Some species of the second assemblage, e.g. horse mackerels (Trachurus trachurus and Trachurus trecae), large finned-lantern fish (Hygophum macrochir) and foureyed sole (Microchirus ocellatus), revealed larval peak occurrences at intermediate and deep water layers, where the near-ground upwelling layer is able to transport larvae back to the shelf. This indicates active larval retention for species that are dominant in the transition area. Diel vertical migration patterns of S. aurita, E. encrasicolus and M. ocellatus revealed that a larval fish species may adapt its behavior to the local environment and do not necessarily follow a diurnal cycle. Field observations are essential to be integrated in larval drift models, since the vertical and horizontal larval distribution will have major consequences for survival. Comprehending larval survival mechanisms is necessary for the ultimate goal to understand and predict recruitment.

High-rate/high-temperature capability of a single-layer zicar-separator nickel-hydrogen cell

NASA Technical Reports Server (NTRS)

Wheeler, James R.

1995-01-01

A 50 Ampere-hour nickel-hydrogen cell with a single-layer Zircar separator stack design was fully charged and then discharged at a 2C current rate to an end voltage of 1 volt. This extreme test resulted in high temperatures which were recorded at three locations on the cell, i.e., the cell wall, the boss (barrel of the compression seal), and a terminal. The results provide new information about the high-temperature and high-discharge-rate capabilities of nickel-hydrogen cells. This information also adds to the growing data base for single-layer zirconium-oxide-cloth (Zircar) separator cell designs.

Testing Penetration of Epoxy Resin and Diamine Hardeners through Protective Glove and Clothing Materials.

PubMed

Henriks-Eckerman, Maj-Len; Mäkelä, Erja A; Suuronen, Katri

2015-10-01

Efficient, comfortable, yet affordable personal protective equipment (PPE) is needed to decrease the high incidence of allergic contact dermatitis arising from epoxy resin systems (ERSs) in industrial countries. The aim of this study was to find affordable, user-friendly glove and clothing materials that provide adequate skin protection against splashes and during the short contact with ERS that often occurs before full cure. We studied the penetration of epoxy resin and diamine hardeners through 12 glove or clothing materials using a newly developed test method. The tests were carried out with two ERS test mixtures that had a high content of epoxy resin and frequently used diamine hardeners of different molar masses. A drop (50 µl) of test mixture was placed on the outer surface of the glove/clothing material, which had a piece of Fixomull tape or Harmony protection sheet attached to the inner surface as the collection medium. The test times were 10 and 30 min. The collecting material was removed after the test was finished and immersed into acetone. The amounts of diglycidyl ether of bisphenol A (DGEBA), isophorone diamine (IPDA), and m-xylylenediamine (XDA) in the acetone solution were determined by gas chromatography with mass spectrometric detection. The limit for acceptable penetration of XDA, IPDA, and DGEBA through glove materials was set at 2 µg cm(-2). Penetration through the glove materials was 1.4 µg cm(-2) or less. The three tested chemical protective gloves showed no detectable penetration (<0.5 µg cm(-2)). Several affordable glove and clothing materials were found to provide adequate protection during short contact with ERS, in the form of, for example, disposable gloves or clothing materials suitable for aprons and as additional protective layers on the most exposed parts of clothing, such as the front of the legs and thighs and under the forearms. Every ERS combination in use should be tested separately to find the best skin protection material, and this can be done by using this simple test method. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Standardization of the carbon-phenolic materials and processes. Vol. 2: Test methods and specifications

NASA Technical Reports Server (NTRS)

Hall, William B.

1988-01-01

Carbon-phenolic composite materials are used in the ablation process in the nozzles of the Space Shuttle Main Engine. The nozzle is lined with carbon cloth-phenolic resin composites. The extreme heat and erosion of the burning propellant are controlled by the carbon-phenolic composite by means of ablation, a heat and mass transfer process in which a large amount of heat is dissipated by sacrificailly removing material from a surface. Phenolic materials ablate with the initial formation of a char. The depth of the char is a function of the heat conduction coefficient of the composite. The char layer is a poor conductor so it protects the underlying phenolic composite from the high heat of the burning propellant. The nozzle component ablative liners (carbon cloth-phenolic resin composites) are tape wrapped, hydroclave and/or autoclave cured, machined and assembled. The tape consists of prepreg broadcloth. The materials flow sheet for the nozzle ablative liners is given. The prepreg is a three component system: phenolic resin, carbon cloth, and carbon filler. This is Volume 2 of the report, Test Methods and Specifications.

Constraining magma ascent and degassing paths with olivine- and clinopyroxene-hosted melt inclusions: Evidence for multiple depths of crystallization and boundary-layer entrapment

NASA Astrophysics Data System (ADS)

Lloyd, A. S.; Newcombe, M. E.; Plank, T. A.

2016-12-01

Although olivine-hosted melt inclusions (MIs) remain the gold standard for recovering volatile concentrations of primitive magmas, later-fractionating minerals may be more appropriate for assessing magma storage conditions immediately prior to eruption. We present volatile analyses of MIs entrapped in early (Mg# 81-83) olivine and later (Mg# 70-80) clinopyroxene (Cpx) from the 1977 eruption of Seguam volcano, to assess the ascent history prior to this violent strombolian eruption. The olivine-hosted MIs contain average volatile concentrations (n=16) of 3.79 wt% H2O, 167 ppm CO2, 592 ppm Cl, and 133 ppm F, consistent with an entrapment pressure of 200 to 300 MPa ( 10-13 km depth) if the CO2 contained in the bubble is taken into account (Moore et al., 2015). Cpx phenocrysts contain two distinct MI assemblages; the inner assemblage consists of randomly distributed, rounded MIs which never contain a vapor bubble. Average volatile concentrations of the inner assemblage MIs (n=11) are 0.96 wt% H2O, 98 ppm CO2, 798 ppm Cl, and 280 ppm F, consistent with an entrapment at much shallower depth, 2 km. The outer assemblage contains inclusions too small for routine volatile analysis. Inner assemblage Cpx-hosted MIs preserve average enrichments of 1.3x and 2x for Cl and F respectively, and are similarly enriched in incompatible minor and trace elements (up to a factor of 5x). Two potential scenarios can explain these observations. The enrichments may represent the entrapment of an unrelated highly-fractionated, shallow magma (which is unsupported by the whole rock record at Seguam). A second possibility is enrichment through boundary layer entrapment during a period of rapid crystal growth during ascent through the upper crust. Boundary layer entrapment during MI formation is further supported by a negative correlation between the degree of enrichment and the diffusivity of individual elements, which is consistent with growth rates 10-8 m/s. Although the olivine-hosted MIs record a volatile-rich storage region, the later-fractionating Cpx indicate a phase of rapid crystallization, likely driven by water loss from the melt at shallow depths. This work highlights the information added by analyzing multiple phases in order to reconstruct the degassing path of magma prior to eruption.

Western Arctic Ocean temperature variability during the last 8000 years

USGS Publications Warehouse

Farmer, Jesse R.; Cronin, Thomas M.; De Vernal, Anne; Dwyer, Gary S.; Keigwin, Loyd D.; Thunell, Robert C.

2011-01-01

We reconstructed subsurface (∼200–400 m) ocean temperature and sea-ice cover in the Canada Basin, western Arctic Ocean from foraminiferal δ18O, ostracode Mg/Ca ratios, and dinocyst assemblages from two sediment core records covering the last 8000 years. Results show mean temperature varied from −1 to 0.5°C and −0.5 to 1.5°C at 203 and 369 m water depths, respectively. Centennial-scale warm periods in subsurface temperature records correspond to reductions in summer sea-ice cover inferred from dinocyst assemblages around 6.5 ka, 3.5 ka, 1.8 ka and during the 15th century Common Era. These changes may reflect centennial changes in the temperature and/or strength of inflowing Atlantic Layer water originating in the eastern Arctic Ocean. By comparison, the 0.5 to 0.7°C warm temperature anomaly identified in oceanographic records from the Atlantic Layer of the Canada Basin exceeded reconstructed Atlantic Layer temperatures for the last 1200 years by about 0.5°C.

Early Levallois and the beginning of the Middle Paleolithic in central Italy.

PubMed

Soriano, Sylvain; Villa, Paola

2017-01-01

In the second half of the 19th century Pleistocene faunas were discovered in two sites, Sedia del Diavolo and Monte delle Gioie, contained in deposits of the Aniene River in the area of Rome (Latium, Italy). Fieldwork by A.C. Blanc in the late 1930's proved the association of fauna and lithic industry within fluvial deposits interbedded with volcanoclastic layers. A human femoral diaphysis and a metatarsal were later identified in the faunal assemblage from Sedia del Diavolo and evaluated as Neandertal. The lithic assemblages from these two sites were the basis of the definition of the Protopontinian by M. Taschini, which she viewed as a late Middle Pleistocene industry very similar to the later, Upper Pleistocene Pontinian industries, thought to be characteristic of the Latium Mousterian. The chronostratigraphic framework of the Aniene river deposits has been recently updated and the lithic assemblages from these two sites are now confidently dated between 295 and 290 ka, close to the transition from MIS 9 to MIS 8. They fit chronologically between the industries of layers m and d from Torre in Pietra, a site 26 km northwest of Rome. The presence of the Levallois debitage is indisputable yet it occurs within an original technical context, different from what is known in other early occurrences of the Levallois. The date confirms the proposed chronology for the early Levallois in Europe. More importantly these two assemblages demonstrate that this technology can emerge in more diversified contexts than usually described. This suggests that its dispersal in Europe may have been rapid.

Early Levallois and the beginning of the Middle Paleolithic in central Italy

PubMed Central

2017-01-01

In the second half of the 19th century Pleistocene faunas were discovered in two sites, Sedia del Diavolo and Monte delle Gioie, contained in deposits of the Aniene River in the area of Rome (Latium, Italy). Fieldwork by A.C. Blanc in the late 1930’s proved the association of fauna and lithic industry within fluvial deposits interbedded with volcanoclastic layers. A human femoral diaphysis and a metatarsal were later identified in the faunal assemblage from Sedia del Diavolo and evaluated as Neandertal. The lithic assemblages from these two sites were the basis of the definition of the Protopontinian by M. Taschini, which she viewed as a late Middle Pleistocene industry very similar to the later, Upper Pleistocene Pontinian industries, thought to be characteristic of the Latium Mousterian. The chronostratigraphic framework of the Aniene river deposits has been recently updated and the lithic assemblages from these two sites are now confidently dated between 295 and 290 ka, close to the transition from MIS 9 to MIS 8. They fit chronologically between the industries of layers m and d from Torre in Pietra, a site 26 km northwest of Rome. The presence of the Levallois debitage is indisputable yet it occurs within an original technical context, different from what is known in other early occurrences of the Levallois. The date confirms the proposed chronology for the early Levallois in Europe. More importantly these two assemblages demonstrate that this technology can emerge in more diversified contexts than usually described. This suggests that its dispersal in Europe may have been rapid. PMID:29053710

Refining Our Understanding of Howiesons Poort Lithic Technology: The Evidence from Grey Rocky Layer in Sibudu Cave (KwaZulu-Natal, South Africa)

PubMed Central

de la Peña, Paloma

2015-01-01

The detailed technological analysis of the youngest Howiesons Poort occupation in Sibudu Cave, layer Grey Rocky, has shown the importance of blade production (with different knapping methods involved), but also of flaking methods in coarse grained rock types. Moreover, new strategies of bifacial production and microlithism were important. Grey Rocky lithic technology shows a really versatile example of reduction strategies that were highly influenced by the characteristics of the rock types. This lithic assemblage is another example of the technological variability linked to the Howiesons Poort technocomplex. The reasons for this variability are still difficult to elucidate. Discrepancies between sites might be for different reasons: diachronic variations, functional variations, organizational variations or maybe different regional variations within what has been recognized traditionally and typologically as Howiesons Poort. The technological comparison of the Grey Rocky assemblage with assemblages from other Howiesons Poort sites demonstrates that there are common technological trends during the late Pleistocene, but they still need to be properly circumscribed chronologically. On the one hand, Howiesons Poort characteristics such as the bifacial production in quartz are reminiscent of production in some Still Bay or pre-Still Bay industries and the flake production or the prismatic blade production described here could be a point in common with pre-Still Bay and post-Howiesons Poort industries. On the other hand, the detailed analysis of the Grey Rocky lithics reinforces the particular character of this Howiesons Poort technocomplex, yet it also shows clear technological links with other Middle Stone Age assemblages. PMID:26633008

Demersal fish assemblages on seamounts and other rugged features in the northeastern Caribbean

NASA Astrophysics Data System (ADS)

Quattrini, Andrea M.; Demopoulos, Amanda W. J.; Singer, Randal; Roa-Varon, Adela; Chaytor, Jason D.

2017-05-01

Recent investigations of demersal fish communities in deepwater (>50 m) habitats have considerably increased our knowledge of the factors that influence the assemblage structure of fishes across mesophotic to deep-sea depths. While different habitat types influence deepwater fish distribution, whether different types of rugged seafloor features provide functionally equivalent habitat for fishes is poorly understood. In the northeastern Caribbean, different types of rugged features (e.g., seamounts, banks, canyons) punctuate insular margins, and thus create a remarkable setting in which to compare demersal fish communities across various features. Concurrently, several water masses are vertically layered in the water column, creating strong stratification layers corresponding to specific abiotic conditions. In this study, we examined differences among fish assemblages across different features (e.g., seamount, canyon, bank/ridge) and water masses at depths ranging from 98 to 4060 m in the northeastern Caribbean. We conducted 26 remotely operated vehicle dives across 18 sites, identifying 156 species of which 42% of had not been previously recorded from particular depths or localities in the region. While rarefaction curves indicated fewer species at seamounts than at other features in the NE Caribbean, assemblage structure was similar among the different types of features. Thus, similar to seamount studies in other regions, seamounts in the Anegada Passage do not harbor distinct communities from other types of rugged features. Species assemblages, however, differed among depths, with zonation generally corresponding to water mass boundaries in the region. High species turnover occurred at depths <1200 m, and may be driven by changes in water mass characteristics including temperature (4.8-24.4 °C) and dissolved oxygen (2.2-9.5 mg per l). Our study suggests the importance of water masses in influencing community structure of benthic fauna, while considerably adding to the knowledge of mesophotic and deep-sea fish biogeography.

Demersal fish assemblages on seamounts and other rugged features in the northeastern Caribbean

USGS Publications Warehouse

Quattrini, Andrea M.; Demopoulos, Amanda W. J.; Singer, Randal; Roa-Varon, Adela; Chaytor, Jason D.

2017-01-01

Recent investigations of demersal fish communities in deepwater (>50 m) habitats have considerably increased our knowledge of the factors that influence the assemblage structure of fishes across mesophotic to deep-sea depths. While different habitat types influence deepwater fish distribution, whether different types of rugged seafloor features provide functionally equivalent habitat for fishes is poorly understood. In the northeastern Caribbean, different types of rugged features (e.g., seamounts, banks, canyons) punctuate insular margins, and thus create a remarkable setting in which to compare demersal fish communities across various features. Concurrently, several water masses are vertically layered in the water column, creating strong stratification layers corresponding to specific abiotic conditions. In this study, we examined differences among fish assemblages across different features (e.g., seamount, canyon, bank/ridge) and water masses at depths ranging from 98 to 4060 m in the northeastern Caribbean. We conducted 26 remotely operated vehicle dives across 18 sites, identifying 156 species of which 42% of had not been previously recorded from particular depths or localities in the region. While rarefaction curves indicated fewer species at seamounts than at other features in the NE Caribbean, assemblage structure was similar among the different types of features. Thus, similar to seamount studies in other regions, seamounts in the Anegada Passage do not harbor distinct communities from other types of rugged features. Species assemblages, however, differed among depths, with zonation generally corresponding to water mass boundaries in the region. High species turnover occurred at depths <1200 m, and may be driven by changes in water mass characteristics including temperature (4.8–24.4 °C) and dissolved oxygen (2.2–9.5 mg per l). Our study suggests the importance of water masses in influencing community structure of benthic fauna, while considerably adding to the knowledge of mesophotic and deep-sea fish biogeography.

Biophysical Factors Affecting the Distribution of Demersal Fish around the Head of a Submarine Canyon Off the Bonney Coast, South Australia

PubMed Central

Currie, David R.; McClatchie, Sam; Middleton, John F.; Nayar, Sasi

2012-01-01

We sampled the demersal fish community of the Bonney Canyon, South Australia at depths (100–1,500 m) and locations that are poorly known. Seventy-eight species of demersal fish were obtained from 12 depth-stratified trawls along, and to either side, of the central canyon axis. Distributional patterns in species richness and biomass were highly correlated. Three fish assemblage groupings, characterised by small suites of species with narrow depth distributions, were identified on the shelf, upper slope and mid slope. The assemblage groupings were largely explained by depth (ρw = 0.78). Compared to the depth gradient, canyon-related effects are weak or occur at spatial or temporal scales not sampled in this study. A conceptual physical model displayed features consistent with the depth zonational patterns in fish, and also indicated that canyon upwelling can occur. The depth zonation of the fish assemblage was associated with the depth distribution of water masses in the area. Notably, the mid-slope community (1,000 m) coincided with a layer of Antarctic Intermediate Water, the upper slope community (500 m) resided within the core of the Flinders Current, and the shelf community was located in a well-mixed layer of surface water (<450 m depth). PMID:22253907

Castro’s Ploy-America’s Dilemma: The 1980 Cuban Boatlift

DTIC Science & Technology

1988-12-01

find in Cuba. The visitors even brought parts for old American automobiles on their flights to Cuba. People wore several layers of clothing, peeling ...2,000 PRESSURE FOR MIGRATION 399IJ! goa ,q AP Wide World Photos Cuban farmers sell bananas and garlic at a small "peasant market" in Havana on 19

Assessing site formation and assemblage integrity through stone tool refitting at Gruta da Oliveira (Almonda karst system, Torres Novas, Portugal): A Middle Paleolithic case study

PubMed Central

Zilhão, João

2018-01-01

We use stone tool refitting to assess palimpsest formation and stratigraphic integrity in the basal units of the Gruta da Oliveira archeo-stratigraphic sequence, layers 15–27, which TL and U-series dating places in late Marine Isotope Stage (MIS) 5 or early MIS 4. As in most karst contexts, the formation of this succession involved multiple and complex phenomena, including subsidence, bioturbation, carnivore activity and runoff as agents of potential post-depositional disturbance. During phases of stabilization, such as represented by layers 15, 21 and 22, the excavated area was inhabited and refits corroborate that post-depositional displacement is negligible. Layers 23–25 and 16–19 correspond to subdivisions that slice thick geological units primarily formed of material derived from the cave’s entrance via slope dynamics. Refit links are consistent with rapid fill-up of the interstitial spaces found in the Karren-like bedrock (for layers 23–25), or left between large boulders after major roof-collapse events (for layers 16–19). Layers 26 (the “Mousterian Cone”) and 27 are a “bottom-of-hourglass” deposit underlying the main sedimentary body; the refits show that this deposit consists of material derived from layers 15–25 that gravitated through fissures open in the sedimentary column above. Layer 20, at the interface between two major stratigraphic ensembles, requires additional analysis. Throughout, we found significant vertical dispersion along the contact between sedimentary fill and cave wall. Given these findings, a preliminary analysis of technological change across the studied sequence organized the lithic assemblages into five ensembles: layer 15; layers 16–19; layer 20; layers 21–22; layers 23–25. The lower ensembles show higher percentages of flint and of the Levallois method. Uniquely at the site, the two upper ensembles feature bifaces and cleavers. PMID:29451892

Hyporheic invertebrate assemblages at reach scale in a Neotropical stream in Brazil.

PubMed

Mugnai, R; Messana, G; Di Lorenzo, T

2015-11-01

In the Neotropical Region, information concerning hyporheic communities is virtually non-existent. We carried out a sampling survey in the hyporheic zone of the Tijuca River, in the Tijuca National Park, located in the urban area of the city of Rio de Janeiro. Biological samples from the hyporheic zone were collected in three different stream reaches, in June 2012. The main objectives were: 1) to describe the structure of invertebrate assemblages in the hyporheic zone of a neotropical stream; 2) to apply a reach-scale approach in order to investigate spatial patterns of the hyporheic assemblages in relation to hydrology, depth and microhabitat typology. A total of 1460 individuals were collected and identified in 31 taxa belonging to Nematoda, Annelida, Crustacea, Hydrachnidia and Insecta. The class Insecta dominated the upper layer of the hyporheic zone. Copepods were the most abundant taxon among crustaceans and occurred mostly in the upwelling areas of the reaches. The results of this study represent one of the few contributions so far about hyporheic invertebrate assemblages of the Neotropical Region.

Macroalgal Extracts Induce Bacterial Assemblage Shifts and Sublethal Tissue Stress in Caribbean Corals

PubMed Central

Morrow, Kathleen M.; Ritson-Williams, Raphael; Ross, Cliff; Liles, Mark R.; Paul, Valerie J.

2012-01-01

Benthic macroalgae can be abundant on present-day coral reefs, especially where rates of herbivory are low and/or dissolved nutrients are high. This study investigated the impact of macroalgal extracts on both coral-associated bacterial assemblages and sublethal stress response of corals. Crude extracts and live algal thalli from common Caribbean macroalgae were applied onto the surface of Montastraea faveolata and Porites astreoides corals on reefs in both Florida and Belize. Denaturing gradient gel electrophoresis (DGGE) of 16S rRNA gene amplicons was used to examine changes in the surface mucus layer (SML) bacteria in both coral species. Some of the extracts and live algae induced detectable shifts in coral-associated bacterial assemblages. However, one aqueous extract caused the bacterial assemblages to shift to an entirely new state (Lobophora variegata), whereas other organic extracts had little to no impact (e.g. Dictyota sp.). Macroalgal extracts more frequently induced sublethal stress responses in M. faveolata than in P. astreoides corals, suggesting that cellular integrity can be negatively impacted in selected corals when comparing co-occurring species. As modern reefs experience phase-shifts to a higher abundance of macroalgae with potent chemical defenses, these macroalgae are likely impacting the composition of microbial assemblages associated with corals and affecting overall reef health in unpredicted and unprecedented ways. PMID:23028648

Flourish or flush: effects of simulated extreme rainfall events on Sphagnum-dwelling testate amoebae in a subarctic bog (Abisko, Sweden).

PubMed

Tsyganov, Andrey N; Keuper, Frida; Aerts, Rien; Beyens, Louis

2013-01-01

Extreme precipitation events are recognised as important drivers of ecosystem responses to climate change and can considerably affect high-latitude ombrotrophic bogs. Therefore, understanding the relationships between increased rainfall and the biotic components of these ecosystems is necessary for an estimation of climate change impacts. We studied overall effects of increased magnitude, intensity and frequency of rainfall on assemblages of Sphagnum-dwelling testate amoebae in a field climate manipulation experiment located in a relatively dry subarctic bog (Abisko, Sweden). The effects of the treatment were estimated using abundance, species diversity and structure of living and empty shell assemblages of testate amoebae in living and decaying layers of Sphagnum. Our results show that increased rainfall reduced the mean abundance and species richness of living testate amoebae. Besides, the treatment affected species structure of both living and empty shell assemblages, reducing proportions of hydrophilous species. The effects are counterintuitive as increased precipitation-related substrate moisture was expected to have opposite effects on testate amoeba assemblages in relatively dry biotopes. Therefore, we conclude that other rainfall-related factors such as increased infiltration rates and frequency of environmental disturbances can also affect testate amoeba assemblages in Sphagnum and that hydrophilous species are particularly sensitive to variation in these environmental variables.

Macroalgal extracts induce bacterial assemblage shifts and sublethal tissue stress in Caribbean corals.

PubMed

Morrow, Kathleen M; Ritson-Williams, Raphael; Ross, Cliff; Liles, Mark R; Paul, Valerie J

2012-01-01

Benthic macroalgae can be abundant on present-day coral reefs, especially where rates of herbivory are low and/or dissolved nutrients are high. This study investigated the impact of macroalgal extracts on both coral-associated bacterial assemblages and sublethal stress response of corals. Crude extracts and live algal thalli from common Caribbean macroalgae were applied onto the surface of Montastraea faveolata and Porites astreoides corals on reefs in both Florida and Belize. Denaturing gradient gel electrophoresis (DGGE) of 16S rRNA gene amplicons was used to examine changes in the surface mucus layer (SML) bacteria in both coral species. Some of the extracts and live algae induced detectable shifts in coral-associated bacterial assemblages. However, one aqueous extract caused the bacterial assemblages to shift to an entirely new state (Lobophora variegata), whereas other organic extracts had little to no impact (e.g. Dictyota sp.). Macroalgal extracts more frequently induced sublethal stress responses in M. faveolata than in P. astreoides corals, suggesting that cellular integrity can be negatively impacted in selected corals when comparing co-occurring species. As modern reefs experience phase-shifts to a higher abundance of macroalgae with potent chemical defenses, these macroalgae are likely impacting the composition of microbial assemblages associated with corals and affecting overall reef health in unpredicted and unprecedented ways.

Classification of soft-shell materials for leisure outdoor jackets by clo defined from thermal properties testing

NASA Astrophysics Data System (ADS)

Tesinova, P.; Steklova, P.; Duchacova, T.

2017-10-01

Materials for outdoor activities are produced in various combinations and lamination helps to combine two or more components for gaining high comfort properties and lighten the structure. Producers can choose exact suitable material for construction of part or set of so called layered clothing for expected activity. Decreasing the weight of materials when preserving of high quality of water-vapour permeability, wind resistivity and hydrostatic resistivity and other comfort and usage properties is a big task nowadays. This paper is focused on thermal properties as an important parameter for being comfort during outdoor activities. Softshell materials were chosen for testing and computation of clo. Results compared with standardised clo table helps us to classify thermal insulation of the set of fabrics when defining proper clothing category.

Composite metal foil and ceramic fabric materials

DOEpatents

Webb, B.J.; Antoniak, Z.I.; Prater, J.T.; DeSteese, J.G.

1992-03-24

The invention comprises new materials useful in a wide variety of terrestrial and space applications. In one aspect, the invention comprises a flexible cloth-like material comprising a layer of flexible woven ceramic fabric bonded with a layer of metallic foil. In another aspect, the invention includes a flexible fluid impermeable barrier comprising a flexible woven ceramic fabric layer having metal wire woven therein. A metallic foil layer is incontinuously welded to the woven metal wire. In yet another aspect, the invention includes a material comprising a layer of flexible woven ceramic fabric bonded with a layer of an organic polymer. In still another aspect, the invention includes a rigid fabric structure comprising a flexible woven ceramic fabric and a resinous support material which has been hardened as the direct result of exposure to ultraviolet light. Inventive methods for producing such material are also disclosed. 11 figs.

METHOD FOR MANUFACTURING LAMINATED SHEETS FOR PROTECTION AGAINST RADIOACTIVE WASTES, AND PROTECTING AND PACKAGING MEANS MANUFACTURED WITH THESE SHEETS; Papierfabrik Wilhemstal Wilhelm Ernst

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1959-07-15

A description is given of laminated sheet, consisting of a first layer of absorbing and preferably fibrous material (e.g., filter or blotting paper, or felt), a second layer of adhesive, impermeable, and hydrophobic material (e.g., wax, bitumen, a polyvinyl or polyacrylic compound, or a polyhydrocarbon), and a third (and fourth) layer of rigid material more or less impermeable to liquids (e.g., metal (aluminum), polyvinyl chloride, polyethylene, or cardboard). These sheets can be used for covering laboratory tables and walls, for radiation protection (manufacture of clothes, etc.), or for packaging radioactive waste (manufacture of boxes, bags, etc.). (NPO)

An Ecological Tipping Point Defined by Shallow Marine Foraminifera in the latest Paleocene

NASA Astrophysics Data System (ADS)

Robinson, M. M.; Spivey, W.

2016-12-01

The Paleocene-Eocene Thermal Maximum (PETM) is recognized in marine sediments by a carbonate dissolution zone, the extinction or turnover of benthic taxa, and a radiation of planktic excursion taxa, all accompanied by a rapid-onset, negative carbon isotope excursion (CIE). We present foraminiferal evidence from shallow marine sediments in southeastern Maryland, USA, where accumulation rates are high, for a minor ocean acidification event in the latest Paleocene that coincides with a relatively small (-2‰) CIE. This pre-onset excursion (POE) precedes the larger (-4‰) PETM CIE onset and dissolution event. During the POE, the benthic assemblage is reconfigured toward agglutinated species in order to adapt to increased acidity, and the planktic assemblage begins to speciate due to perturbed mixed layer conditions. The benthic assemblage returns to normal, without interruption, as the POE recovers, but planktic excursion taxa continue to appear in very low numbers. This is contrasted to the major ocean acidification event associated with the PETM CIE onset that results in a zone of complete dissolution followed by distinctive benthic and planktic foraminiferal assemblages. Our microfossil evidence documents a biotic response to bottom water and mixed layer perturbations that illustrates how coastal ecosystems react to both moderate and severe ocean acidification events, bracketing the ecological tipping point of shallow marine ecosystems. The POE, roughly half the magnitude of the CIE onset, provides insight into the nature of the initial effects of climate perturbation as well as an example of one that is fully recoverable. It is here that research aimed to better understand the long-term effects and reversibility of modern deteriorating oceanic conditions should focus. This study provides an initial metric by which to measure modern ecosystem disturbances and will help to define the tipping point for the shallow marine environment.

Analysis of Site Formation and Assemblage Integrity Does Not Support Attribution of the Uluzzian to Modern Humans at Grotta del Cavallo

PubMed Central

Zilhão, João; Banks, William E.; d’Errico, Francesco; Gioia, Patrizia

2015-01-01

Based on the morphology of two deciduous molars and radiocarbon ages from layers D and E of the Grotta del Cavallo (Lecce, Italy), assigned to the Uluzzian, it has been proposed that modern humans were the makers of this Early Upper Paleolithic culture and that this finding considerably weakens the case for an independent emergence of symbolism among western European Neandertals. Reappraisal of the new dating evidence, of the finds curated in the Taranto Antiquities depot, and of coeval publications detailing the site’s 1963–66 excavations shows that (a) Protoaurignacian, Aurignacian and Early Epigravettian lithics exist in the assemblages from layers D and E, (b) even though it contains both inherited and intrusive items, the formation of layer D began during Protoaurignacian times, and (c) the composition of the extant Cavallo assemblages is influenced in a non-negligible manner by the post-hoc assignment of items to stratigraphic units distinct from that of original discovery. In addition, a major disturbance feature affected the 1960s excavation trench down to Mousterian layer F, this feature went unrecognized until 1964, the human remains assigned to the Uluzzian were discovered that year and/or the previous year, and there are contradictions between field reports and the primary anthropological description of the remains as to their morphology and level of provenience. Given these major contextual uncertainties, the Cavallo teeth cannot be used to establish the authorship of the Uluzzian. Since this technocomplex’s start date is ca. 45,000 calendar years ago, a number of Neandertal fossils are dated to this period, and the oldest diagnostic European modern human fossil is the <41,400 year-old Oase 1 mandible, Neandertal authorship of the Uluzzian remains the parsimonious reading of the evidence. PMID:26154139

Spatial Molecular Architecture of the Microbial Community of a Peltigera Lichen.

PubMed

Garg, Neha; Zeng, Yi; Edlund, Anna; Melnik, Alexey V; Sanchez, Laura M; Mohimani, Hosein; Gurevich, Alexey; Miao, Vivian; Schiffler, Stefan; Lim, Yan Wei; Luzzatto-Knaan, Tal; Cai, Shengxin; Rohwer, Forest; Pevzner, Pavel A; Cichewicz, Robert H; Alexandrov, Theodore; Dorrestein, Pieter C

2016-01-01

Microbes are commonly studied as individual species, but they exist as mixed assemblages in nature. At present, we know very little about the spatial organization of the molecules, including natural products that are produced within these microbial networks. Lichens represent a particularly specialized type of symbiotic microbial assemblage in which the component microorganisms exist together. These composite microbial assemblages are typically comprised of several types of microorganisms representing phylogenetically diverse life forms, including fungi, photosymbionts, bacteria, and other microbes. Here, we employed matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) imaging mass spectrometry to characterize the distributions of small molecules within a Peltigera lichen. In order to probe how small molecules are organized and localized within the microbial consortium, analytes were annotated and assigned to their respective producer microorganisms using mass spectrometry-based molecular networking and metagenome sequencing. The spatial analysis of the molecules not only reveals an ordered layering of molecules within the lichen but also supports the compartmentalization of unique functions attributed to various layers. These functions include chemical defense (e.g., antibiotics), light-harvesting functions associated with the cyanobacterial outer layer (e.g., chlorophyll), energy transfer (e.g., sugars) surrounding the sun-exposed cyanobacterial layer, and carbohydrates that may serve a structural or storage function and are observed with higher intensities in the non-sun-exposed areas (e.g., complex carbohydrates). IMPORTANCE Microbial communities have evolved over centuries to live symbiotically. The direct visualization of such communities at the chemical and functional level presents a challenge. Overcoming this challenge may allow one to visualize the spatial distributions of specific molecules involved in symbiosis and to define their functional roles in shaping the community structure. In this study, we examined the diversity of microbial genes and taxa and the presence of biosynthetic gene clusters by metagenomic sequencing and the compartmentalization of organic chemical components within a lichen using mass spectrometry. This approach allowed the identification of chemically distinct sections within this composite organism. Using our multipronged approach, various fungal natural products, not previously reported from lichens, were identified and two different fungal layers were visualized at the chemical level.

Spatial Molecular Architecture of the Microbial Community of a Peltigera Lichen

PubMed Central

Garg, Neha; Zeng, Yi; Edlund, Anna; Melnik, Alexey V.; Mohimani, Hosein; Gurevich, Alexey; Miao, Vivian; Schiffler, Stefan; Lim, Yan Wei; Luzzatto-Knaan, Tal; Cai, Shengxin; Rohwer, Forest; Pevzner, Pavel A.; Cichewicz, Robert H.; Alexandrov, Theodore

2016-01-01

ABSTRACT Microbes are commonly studied as individual species, but they exist as mixed assemblages in nature. At present, we know very little about the spatial organization of the molecules, including natural products that are produced within these microbial networks. Lichens represent a particularly specialized type of symbiotic microbial assemblage in which the component microorganisms exist together. These composite microbial assemblages are typically comprised of several types of microorganisms representing phylogenetically diverse life forms, including fungi, photosymbionts, bacteria, and other microbes. Here, we employed matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) imaging mass spectrometry to characterize the distributions of small molecules within a Peltigera lichen. In order to probe how small molecules are organized and localized within the microbial consortium, analytes were annotated and assigned to their respective producer microorganisms using mass spectrometry-based molecular networking and metagenome sequencing. The spatial analysis of the molecules not only reveals an ordered layering of molecules within the lichen but also supports the compartmentalization of unique functions attributed to various layers. These functions include chemical defense (e.g., antibiotics), light-harvesting functions associated with the cyanobacterial outer layer (e.g., chlorophyll), energy transfer (e.g., sugars) surrounding the sun-exposed cyanobacterial layer, and carbohydrates that may serve a structural or storage function and are observed with higher intensities in the non-sun-exposed areas (e.g., complex carbohydrates). IMPORTANCE Microbial communities have evolved over centuries to live symbiotically. The direct visualization of such communities at the chemical and functional level presents a challenge. Overcoming this challenge may allow one to visualize the spatial distributions of specific molecules involved in symbiosis and to define their functional roles in shaping the community structure. In this study, we examined the diversity of microbial genes and taxa and the presence of biosynthetic gene clusters by metagenomic sequencing and the compartmentalization of organic chemical components within a lichen using mass spectrometry. This approach allowed the identification of chemically distinct sections within this composite organism. Using our multipronged approach, various fungal natural products, not previously reported from lichens, were identified and two different fungal layers were visualized at the chemical level. PMID:28028548

Standardization of the carbon-phenolic materials and processes. Vol. 1: Experimental studies

NASA Technical Reports Server (NTRS)

Hall, William B.

1988-01-01

Carbon-phenolic composite materials are used as ablative material in the solid rocket motor nozzle of the Space Shuttle. The nozzle is lined with carbon cloth-phenolic resin composites. The nominal effects of the completely consumed solid propellant on the carbon-phenolic material are given. The extreme heat and erosion of the burning propellant are controlled by the carbon-phenolic composite by ablation, the heat and mass transfer process in which a large amount of heat is absorbed by sacrificially removing material from the nozzle surface. Phenolic materials ablate with the initial formation of a char. The depth of the char is a function of the heat conduction coefficient of the composite. The char layer is a very poor heat conductor so it protects the underlying phenolic composite from the high heat of the burning propellant. The nozzle component ablative liners (carbon cloth-phenolic composites) are tape wrapped, hydroclave and/or autoclave cured, machined, and assembled. The tape consists of a prepreg broadcloth. The materials flow sheet for the nozzle ablative liners is shown. The prepreg is a three component system: phenolic resin, carbon cloth, and carbon filler. This is Volume 1 of two, Experimental Studies.

Oxygen Consumption and Heat Balance in the Cot-nursed Baby

PubMed Central

Hey, E. N.; O'Connell, Bridget

1970-01-01

Oxygen consumption and heat balance have been studied in 42 clothed babies under varied environmental temperature conditions. The information obtained has made it possible to compare the thermal environment provided by an incubator with that provided by an ordinary nursery cot. Some of the merits of cots and incubators are contrasted. Resistance to heat loss in a naked newborn baby lying on a mattress in a moderately humid draught-free room is approximately 1 `clo' unit. Provision of a vest, napkin, and long nightdress increases this resistance to about 2·3 units, while wrapping the clothed baby in a flannelette sheet and covering it with 2 layers of cotton blanket increases the total resistance to 2·9 clo units. A draught-free environment of 24 °C. (75 °F.) is necessary to provide completely neutral thermal conditions for most cot-nursed babies insulated against heat loss with clothes and blankets in the first month of life, while a room temperature of up to 29 °C. (85 °F.) may be necessary to ensure comparable conditions for a baby weighing less than 1½ kg. during much of the first week of life. ImagesFIG. 1 PMID:5427847

Damage to apparel layers and underlying tissue due to hand-gun bullets.

PubMed

Carr, Debra; Kieser, Jules; Mabbott, Alexander; Mott, Charlotte; Champion, Stephen; Girvan, Elizabeth

2014-01-01

Ballistic damage to the clothing of victims of gunshot wounds to the chest can provide useful forensic evidence. Anyone shot in the torso will usually be wearing clothing which will be damaged by the penetrating impact event and can reportedly be the source of some of the debris in the wound. Minimal research has previously been reported regarding the effect of bullets on apparel fabrics and underlying tissue. This paper examines the effect of ammunition (9 mm full metal jacket [FMJ] DM11 A1B2, 8.0 g; and soft point flat nose Remington R357M3, 10.2 g) on clothing layers that cover the torso (T-shirt, T-shirt plus hoodie, T-shirt plus denim jacket) and underlying structures represented by porcine thoracic wall (skin, underlying tissue, ribs). Impacts were recorded using a Phantom V12 high speed camera. Ejected bone debris was collected before wound tracts were dissected and measured; any debris found was recovered for further analysis. Size and mass of bony debris was recorded; fibre debris recovered from the wound and impact damage to fabrics were imaged using scanning electron microscopy (SEM). Remington R357M3 ammunition was characteristically associated with stellate fabric damage; individual fibres were less likely to show mushrooming. In contrast, 9 mm FMJ ammunition resulted in punch-out damage to fabric layers, with mushrooming of individual fibres being more common. Entry wound sizes were similar for both types of ammunition and smaller than the diameter of the bullet that caused them. In this work, the Remington R357M3 ammunition resulted in larger exit wounds due to the bullet construction which mushroomed. That fabric coverings did not affect the amount of bony debris produced is interesting, particularly given there was some evidence that apparel layers affected the size of the wound. Recent work has suggested that denim (representative of jeans) can exacerbate wounding caused by high-velocity bullet impacts to the thigh when the bullet does not impact the femur. That more bony debris was caused by Remington R357M3 rather than 9 mm FMJ ammunition was not surprising given the relative constructions of these two bullets, and is of interest to medical practitioners.

Effects of two kinds of underwear on metabolic heat production during 60 min recovery after 30 min severe exercise in the cold.

PubMed

Ha, M; Tokura, H; Gotoh, J; Holmér, I

1998-09-01

The purpose of this study is to investigate the thermophysiological significance of hydrophilic and hydrophobic properties of underwear materials under the influences of profuse sweating produced during severe exercise in the cold. Two kinds of underwear were used: two layers of cotton underwear with two-piece long-sleeved shirt and full-trousers (C), and two layers of polypropylene underwear with two-piece long-sleeved shirt and full-trousers (P). In addition, the subject put on a two-piece ski suit of 100% polyester including 100% polyester padding. Eight adult females volunteered as subjects in this study. The test was performed in a climatic chamber at an ambient air temperature of 2 degrees C and an air velocity of 0.26 m.s-1. The subject exercised on a cycle ergometer at an intensity of 65% maximal oxygen uptake for 30 min and followed by 60 min recovery. The major findings are summarized as follows: 1) The fall of rectal temperature tended to be greater in P during the recovery. 2) The absolute humidity of innermost layer and middle layer was significantly higher in C than in P during the recovery, but the absolute humidity of middle layer and outermost layer was significantly higher in P than in C during the exercise. 3) Clothing microclimate temperature of innermost at back was significantly higher in C during the exercise and recovery. 4) Metabolic heat production for last 30 min during recovery was significantly higher in P. 5) The degree of skin wettedness sensation and sweating sensation for whole body was significantly higher in P during the exercise. It was concluded that the slower evaporation behavior by absorbing of underwear material in the clothing system has a beneficial influence on thermophysiological responses during severe exercise and its recovery in the cold, although the differences were very small.

Petrology, geochemistry and isotope data on a ultrahigh-pressure jadeite quartzite from Shuanghe, Dabie Mountains, East-central China

NASA Astrophysics Data System (ADS)

Liou, J. G.; Zhang, R. Y.; Jahn, Bor-ming

1997-08-01

In the Dabie ultrahigh-pressure terrane of east-central China, coesite-bearing jadeite quartzites occur locally as intercalated layers with marble and mafic eclogite. This rock assemblage is, in turn, enclosed within quartzofeldspathic gneisses. Metamorphic parageneses and kelyphitic textures reveal a multistage metamorphic evolution and complex exhumation history. The primary peak metamorphic assemblage consists of jadeite + garnet + coesite + rutile ± apatite. Minor coesite and coesite pseudomorphs occur as inclusions in jadeite and garnet. Three stages of retrograde assemblages are observed in the jadeite quartzites. Stage A is represented by the polymorphic transformation of coesite to quartz aggregates. Stage B is characterized by formation of coronas around jadeite porphyroblasts consisting of an inner layer of oligoclase + amphibole and an outer layer of albite ± aegirine—augite. The last stage (stage C) involved total replacement of jadeite and most garnets by taramitic amphibole + albite + aegirine-augite. Peak metamorphic P-T conditions were > 26 kbar at 660°C and are consistent with the estimates from the adjacent coesite-bearing eclogites. The jadeite quartzites display clockwise P-T path that matches those of the adjacent eclogites. Major and trace element data suggest that the protolith of the jadeite quartzite could have been an albitized siltstone enriched in Na and depleted in K and Ca. The highly negative present-day ɛNd value (-24.7) indicates a very old age for the protolith. Its late Archean model age (TDM) of 2.58 Ga is among the oldest so far identified for rocks from the Dabie UHPM terrane. Concordant field relations and petrogenetic considerations suggest that all mafic, politic, carbonate and gneissic rocks have experienced in-situ UHP metamorphism during Triassic continental collision between the Sino-Korean and Yangtze cratons.

High-performance flexible electrode based on electrodeposition of polypyrrole/MnO2 on carbon cloth for supercapacitors

NASA Astrophysics Data System (ADS)

Fan, Xingye; Wang, Xiaolei; Li, Ge; Yu, Aiping; Chen, Zhongwei

2016-09-01

A highly flexible electrodes based on electrodeposited MnO2 and polypyrrole composite on carbon cloth is designed and developed by a facile in-situ electrodeposition technique. Such flexible composite electrodes with multiply layered structure possess a high specific capacitance of 325 F g-1 at a current density of 0.2 A g-1, and an excellent rate capability with a capacitance retention of 70% at a high current density of 5.0 A g-1. The superior electrochemical performance is mainly due to the unique electrode with improved ion- and electron-transportation pathways as well as the efficient utilization of active materials and electrode robustness. The excellent electrochemical performance and the low cost property endow this flexible nanocomposite electrode with great promise in applications of flexible supercapacitors.

SiC Composite Turbine Vanes

NASA Technical Reports Server (NTRS)

Calomino, Anthony M.; Verilli, Michael J.

2006-01-01

Turbine inlet guide vanes have been fabricated from composites of silicon carbide fibers in silicon carbide matrices. A unique design for a cloth made from SiC fibers makes it possible to realize the geometric features necessary to form these vanes in the same airfoil shapes as those of prior metal vanes. The fiber component of each of these vanes was made from SiC-fiber cloth coated with boron nitride. The matrix was formed by chemical-vapor infiltration with SiC, then slurry-casting of SiC, followed by melt infiltration with silicon. These SiC/SiC vanes were found to be capable of withstanding temperatures 400 F (222 C) greater than those that can be withstood by nickel-base-superalloy turbine airfoils now in common use in gas turbine engines. The higher temperature capability of SiC/SiC parts is expected to make it possible to use them with significantly less cooling than is used for metallic parts, thereby enabling engines to operate more efficiently while emitting smaller amounts of NOx and CO. The SiC/SiC composite vanes were fabricated in two different configurations. Each vane of one of the configurations has two internal cavities formed by a web between the suction and the pressure sides of the vane. Each vane of the other configuration has no web (see Figure 1). It is difficult to fabricate components having small radii, like those of the trailing edges of these vanes, by use of stiff stoichiometric SiC fibers currently preferred for SiC/SiC composites. To satisfy the severe geometric and structural requirements for these vanes, the aforementioned unique cloth design, denoted by the term Y-cloth, was conceived (see Figure 2). In the regions away from the trailing edge, the Y-cloth features a fiber architecture that had been well characterized and successfully demonstrated in combustor liners. To form a sharp trailing edge (having a radius of 0.3 mm), the cloth was split into two planes during the weaving process. The fiber tows forming the trailing-edge section were interlocked, thereby enhancing through-thickness strength of the resulting composite material. For vanes of the webless configuration, each made from a layup of six plies of Ycloth, the length of each Y-cloth layer was cut so that the two strips corresponding to the aforementioned two planes would wrap around the perimeter of a graphite vane preform tool with a 10-mm overlap. The overlap was used to join the two strips in a fringe splice. To make the external sixth ply, a standard woven cloth was cut to the required final length and a fringe splice joined the two ends of the cloth at the trailing edge. The cloth was then prepregged. The entire assembly was then placed into an aluminum compaction tool designed to form the outer net shape of the vane. After the prepreg material was allowed to dry, the preform was removed from the aluminum tooling and placed into an external graphite tool before being shipped to a vendor for matrix infiltration. To make the SiC fiber preform for a vane having an internal web, a slightly different initial approach was followed. Each of two sections forming the internal cavities (and ultimately the web) was created by first slipping two concentric layers of a two-dimensional, 2-by-2, 45 - braided tube around a net-shape graphite mandrel. The tubes on both mandrels were prepregged and allowed to dry. The resulting two subassemblies were put together, then four additional plies were wrapped around them in the same fashion as that described above for the six plies of the vaneless configuration. The consolidation of the SiC fiber preforms into SiC/SiC composite parts was performed by commercial vendors using their standard processes. The capability of two of the webless SiC/SiC turbine vanes was demonstrated in tests in a turbine environment. The tests included 50 hours of steady-state operation and 102 two-minute thermal cycles. A surface temperature of 1,320 C was reached during the tests.

Interface bonding of shotcrete reinforced brick masonry assemblages, volume 1

NASA Astrophysics Data System (ADS)

Robinson, D. W.; Kahn, L. F.

1982-09-01

Nine 9 sq ft. shotcrete reinforced brick masonry assemblages and one 9 sq ft brick masonry control specimen were tested under a single reversed cycle diagonal compression load similar to the ASTM E519-74 testing procedures. The interface surface conditions, between the brick and shotcrete were varied. The surfaces of the single sythe of old brick were either dry, wet, or epoxy coated before application of the 3-inch reinforced shotcrete layer. Ultimate load capacities of the specimens were similar, however, specimens with epoxy-enhanced interfaces were the most ductile; the dry brick specimens showed interface bond failure immediately after the ultimate inplane load was attained.

Syn- and post-sedimentary controls on clay mineral assemblages in a tectonically active basin, Andean Argentinean foreland

NASA Astrophysics Data System (ADS)

Do Campo, Margarita; Nieto, Fernando; del Papa, Cecilia; Hongn, Fernando

2014-07-01

In the northern part of the Calchaquí Valley (NW Argentina), Palaeogene Andean foreland sediments are represented by a 1400-metre-thick continental succession (QLC: Quebrada de Los Colorados Formation) consisting of claystones, siltstones, sandstones, and conglomerates representing sedimentation in fluvial-alluvial plains and alluvial fan settings. To understand the main syn- and postsedimentary variables controlling the clay mineral assemblages of this succession, we have studied the fine-grained clastic sediments by X-ray diffraction and electron microscopy, along with a detailed sedimentary facies analysis, for two representative sections. In the northern section, the whole succession was sampled and analysed by XRD, whereas in the second section, a control point 15 km to the south, only the basal levels were analysed. The XRD study revealed a strong contrast in clay mineral assemblages between these two sections as well as with sections in the central Calchaquí Valley studied previously. In the northernmost part of the study area, a complete evolution from smectite at the top to R3 illite/smectite mixed-layers plus authigenic kaolinite at the bottom, through R1-type mixed-layers in between, has been recognized, indicating the attainment of late diagenesis. In contrast, the clay mineral assemblages of equivalent foreland sediments cropping out only 15 km to the south contain abundant smectite and micas, subordinate kaolinite and chlorite, and no I/S mixed-layers to the bottom of the sequence. Early diagenetic conditions were also inferred in a previous study for equivalent sediments of the QLC Formation cropping out to the south, in the central Calchaquí Valley, as smectite occurs in basal strata. Burial depths of approximately 3000 m were estimated for the QLC Formation in the central and northern Calchaquí Valley; in addition, an intermediate to slightly low geothermal gradient can be considered likely for both areas as foreland basins are regarded as hypothermal basins. Consequently, the attainment of late diagenesis in the northernmost study area cannot be explained by significant differences in burial depth nor in geothermal gradient in relation to the section 15 km to the south nor with the central Calchaquí Valley. The formation of R3 mixed-layer I/S and authigenic kaolinite in the northern study area was most likely controlled by the circulation of hot, deep fluids along the reverse faults that bounded the Calchaquí valley. These faults were active during the Cenozoic, as evidenced by the syndepositional deformation features preserved in the studied sediments. Stress could also have been a driving force in burial diagenesis at the R3 mixed-layer I/S stage in these young continental sediments.

Craft in America: A Journey to the Artists, Origins and Work of American Craft

ERIC Educational Resources Information Center

SchoolArts: The Art Education Magazine for Teachers, 2007

2007-01-01

Quilting, the tradition of stitching together layers of fabric and padding, probably began as a way to provide protection in clothing, but one most often associates quilts with the warmth and comfort of bedding. As so often happens with objects created for a particular purpose, quilts have come to be valued, not only for their function, but also…

Predicting survival time for cold exposure

NASA Astrophysics Data System (ADS)

Tikuisis, Peter

1995-06-01

The prediction of survival time (ST) for cold exposure is speculative as reliable controlled data of deep hypothermia are unavailable. At best, guidance can be obtained from case histories of accidental exposure. This study describes the development of a mathematical model for the prediction of ST under sedentary conditions in the cold. The model is based on steady-state heat conduction in a single cylinder comprised of a core and two concentric annular shells representing the fat plus skin and the clothing plus still boundary layer, respectively. The ambient condition can be either air or water; the distinction is made by assigning different values of insulation to the still boundary layer. Metabolic heat production ( M) is comprised of resting and shivering components with the latter predicted by temperature signals from the core and skin. Where the cold exposure is too severe for M to balance heat loss, ST is largely determined by the rate of heat loss from the body. Where a balance occurs, ST is governed by the endurance time for shivering. End of survival is marked by the deep core temperature reaching a value of 30° C. The model was calibrated against survival data of cold water (0 to 20° C) immersion and then applied to cold air exposure. A sampling of ST predictions for the nude exposure of an average healthy male in relatively calm air (1 km/h wind speed) are the following: 1.8, 2.5, 4.1, 9.0, and >24 h for -30, -20, -10, 0, and 10° C, respectively. With two layers of loose clothing (average thickness of 1 mm each) in a 5 km/h wind, STs are 4.0, 5.6, 8.6, 15.4, and >24 h for -50, -40, -30, -20, and -10° C. The predicted STs must be weighted against the extrapolative nature of the model. At present, it would be prudent to use the predictions in a relative sense, that is, to compare or rank-order predicted STs for various combinations of ambient conditions and clothing protection.

Pd-catalysts for DFAFC prepared by magnetron sputtering

NASA Astrophysics Data System (ADS)

Bieloshapka, I.; Jiricek, P.; Vorokhta, M.; Tomsik, E.; Rednyk, A.; Perekrestov, R.; Jurek, K.; Ukraintsev, E.; Hruska, K.; Romanyuk, O.; Lesiak, B.

2017-10-01

Samples of a palladium catalyst for direct formic acid fuel cell (DFAFC) applications were prepared on the Elat® carbon cloth by magnetron sputtering. The quantity of Pd was equal to 3.6, 120 and 720 μg/cm2. The samples were tested in a fuel cell for electro-oxidation of formic acid, and were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The XPS measurements revealed a high contribution of PdCx phase formed at the Pd/Elat® surface interface, with carbon concentration in PdCx from x = 9.9-14.6 at.%, resulting from the C substrate and CO residual gases. Oxygen groups, e.g. hydroxyl (-OH), carbonyl (Cdbnd O) and carboxyl (COOH), resulted from the synthesis conditions due to the presence of residual gases, electro-oxidation during the reaction and oxidation in the atmosphere. Because of the formation of CO and CO2 on the catalysts during the reaction, or because of poisoning by impurities containing the -CH3 group, together with the risk of Pd losses due to dissolution in formic acid, there was a negative effect of catalyst degradation on the active area surface. The effect of different loadings of Pd layers led to increasing catalyst efficiency. Current-voltage curves showed that different amounts of catalyst did not increase the DFAFC power to a great extent. One reason for this was the catalyst structure formed on the carbon cloth. AFM and SEM measurements showed a layer-by-layer growth with no significant variations in morphology. The results for electric power recalculated for the Pd loading per 1 mg of catalyst layers in comparison to carbon substrates decorated by Pd nanoparticles showed that there is potential for applying anodes for formic acid fuel cells prepared by magnetron sputtering.

Postglacial volcanic deposits at Glacier Peak, Washington, and potential hazards from future eruptions; a preliminary report

USGS Publications Warehouse

Beget, J.E.

1982-01-01

Eruptions and other geologic events at Glacier Peak volcano in northern Washington have repeatedly affected areas near the volcano as well as areas far downwind and downstream. This report describes the evidence of this activity preserved in deposits on the west and east flanks of the volcano. On the west side of Glacier Peak the oldest postglacial deposit is a large, clayey mudflow which traveled at least 35 km down the White Chuck River valley sometime after 14,000 years ago. Subsequent large explosive eruptions produced lahars and at least 10 pyroclastic-flow deposits, including a semiwelded vitric tuff in the White Chuck River valley. These deposits, known collectively as the White Chuck assemblage, form a valley fill which is locally preserved as far as 100 km downstream from the volcano in the Stillaguamish River valley. At least some of the assemblage is about 11,670-11,500 radiocarbon years old. A small clayey lahar, containing reworked blocks of the vitric tuff, subsequently traveled at least 15 km down the White Chuck River. This lahar is overlain by lake sediments containing charred wood which is about 5,500 years old. A 150-m-thick assemblage of pyroclastic-flow deposits and lahars, called the Kennedy Creek assemblage, is in part about 5,500-5,100 radiocarbon years old. Lithic lahars from this assemblage extend at least 100 km downstream in the Skagit River drainage. The younger lahar assemblages, each containing at least three lahars and reaching at least 18 km downstream from Glacier Peak in the White Chuck River valley, are about 2,800 and 1,800 years old, respectively. These are postdated by a lahar containing abundant oxyhornblende dacite, which extends at least 30 km to the Sauk River. A still younger lahar assemblage that contains at least five lahars, and that also extends at least 30 km to the Sauk River, is older than a mature forest growing on its surface. At least one lahar and a flood deposit form a low terrace at the confluence of the White Chuck and Sauk Rivers, and were deposited before 300 years ago, but more recently than about 1,800 years ago. Several small outburst floods, including one in 1975, have affected Kennedy and Baekos Creek and the upper White Chuck River in the last hundred years. East of Glacier Peak the oldest postglacial deposits consist of ash-cloud deposits that underlie tephra erupted by Glacier Peak between 12,750 and 11,250 radiocarbon years ago. Although pyroclastic-flow deposits correlative with the ash-cloud deposits have not been recognized, late Pleistocene pumiceous lahars extend at least 50 km downstream in the Suiattle River valley. A younger clayey mudflow extends at least 6 km down Dusty Creek. This lahar is overlain by deposits of lithic pyroclastic flows and lahars that form the Dusty assemblage. This assemblage is at least 300 m thick in the upper valleys of Dusty and Chocolate Creeks, and contains more than 10 km3 of lithic debris. Lahars derived from the Dusty assemblage extend at least 100 km down the Skagit River valley from Glacier Peak. This assemblage is younger than tephra layer 0 from Mount Mazama, and older than tephra layer Yn from Mount St. Helens, and thus was formed between about 7,000 and 3,400 years ago. The Dusty assemblage may have been formed at the same time as the Kennedy Creek assemblage. A 100-m-thick assemblage of pyroclastic flows and lahars preserved in the Chocolate Creek valley is about 1,800 radiocarbon years old. A clayey lahar in the upper Chocolate Creek valley extended at least 2 km downvalley after 1,800 years ago, but before pyroclastic flows and lahars were deposited in upper Chocolate Creek 1,100 radiocarbon years ago. Several clayey lahars in the Dusty Creek valley east of Glacier Peak are also about 1,100 years old. A lahar in the valley of Dusty Creek, which contains rare prismatically jointed blocks of vesiculated dacite, and a white ash that is locally as much as 50 cm thick may be the products of small

PROTECTIVE CLOTHING BASED ON PERMSELECTIVE MEMBRANE AND CARBON ADSORPTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.G. Wijmans; J.O. Stull

2001-11-07

The goal of this project was to develop chemical protective clothing for use by DOE decontamination and decommissioning workers that is sufficiently water vapor permeable to keep the workers cool, thereby enhancing their productivity. This report describes the results of Phase II of a two-phase project to complete development of the novel permselective material and to test protective clothing made from the fabric. In Phase I a novel material incorporating a nonporous hydrophilic polyvinylacohol (PVA) layer, which is water vapor permeable but relatively impermeable to organic vapors, was developed. The results of the Phase I tests showed that the chemicalmore » resistance of the MTR material is comparable to that of Saranex/Tyvek materials, and that the comfort properties are closer to those of Tyvek (as measured in terms of CLO and permeability). Chemical resistance was measured using permeation tests against liquid dichloromethane. Comfort properties were ascertained by measuring the water vapor transmission of the material and by sweating manikin tests on whole protective suits. In addition, a cost/benefit analysis demonstrated that use of MTR's material technology could result in significant improvements in work productivity and cost savings if protective clothing items made from the new material were used more than once. In Phase II, MTR undertook a program to optimize the performance and production engineering for the new material technology. A partnership was formed with Kimberly-Clark Corporation to assist with a detailed evaluation of the MTR technology, and MTR used the services of Mr. Jeff Stull, President of the consulting firm International Personnel Protection, Inc., who conducted a detailed economic and application analysis for the developed fabric. The protective fabric manufacturing steps were simplified significantly, resulting in a 30% reduction in manufacturing costs and eliminating the necessity for capital investment in production equipment. Protective suits were prepared in collaboration with Kimberly-Clark Corporation and heat stress testing with human test subjects was carried out by the International Union of Operating Engineers (IUOE). The tests confirmed that the MTR protective fabric is significantly more comfortable than non-breathable materials. A cost analysis was developed from the properties of the optimized protective fabric and the results of the of the IUOE field study to determine the potential for the MTR material technology within the chemical protective clothing market. A detailed assessment of the specific chemical protective clothing applications for which the material can be used and its competitiveness with existing material technology, based both on expected performance and material/end item costs, was prepared. Three specific market opportunities identified for the novel protective fabric are: (1) liquid splash protective clothing for hazardous waste site operations, (2) liquid splash protective clothing for emergency response, and (3) Class 3 NFPA 1994-compliant protective clothing for civilian use during chemical terrorism incidents.« less

North Pole Marathon Laboratory Lessons and Field Success.

PubMed

Barwood, Martin J; Burrows, Holly; Cessford, Jessica

2016-05-01

This case study documents the training, laboratory preparation, and in-race performance data from Great Britain's top finisher in the 13(th) edition of the UVU North Pole Marathon. We report data from a preparatory laboratory test in simulated cold conditions (-15°C) with and without wind chill during high- and low-intensity expected 'race pace' running. These tests examined the adequacy of the selected clothing assembly and provided recommendations for the race. The tests established that there was no risk of hypothermia, as the clothing assembly provided too much insulation; terminal rectal temperature was 39.25°C. Skin temperature (Tsk) data revealed no impending risk of frostbite; nadir Tsk was 20.2°C at the hamstring. Oxygen consumption data revealed the self-selected high intensity was potentially not sustainable based on estimates of substrate utilization. We recommended: 1) a maximum running speed; 2) some of the clothing base layers could be removed pre-race; 3) vents and/or zips could be used to offload or retain heat; and 4) an even pacing profile should be adopted. The participant completed the race in 6:55:24 (h:mm:ss) in temperatures of -41°C. GPS data revealed a positive pacing template (i.e., marginally quicker in the first half). Neither hypothermia nor frostbite occurred. Peak pace from the laboratory tests was not consistently exceeded. Marathon performance can be undertaken in one of the world's most inhospitable environments when careful consideration is given to clothing insulation and exercise intensity by planning for the dynamic thermal changes that may occur as the race ensues.

Analytical assessment of woven fabrics under vertical stabbing - The role of protective clothing.

PubMed

Hejazi, Sayyed Mahdi; Kadivar, Nastaran; Sajjadi, Ali

2016-02-01

Knives are being used more commonly in street fights and muggings. Therefore, this work presents an analytical model for woven fabrics under vertical stabbing loads. The model is based on energy method and the fabric is assumed to be unidirectional comprised of N layers. Thus, the ultimate stab resistance of fabric was determined based on structural parameters of fabric and geometrical characteristics of blade. Moreover, protective clothing is nowadays considered as a strategic branch in technical textile industry. The main idea of the present work is improving the stab resistance of woven textiles by using metal coating method. In the final, a series of vertical stabbing tests were conducted on cotton, polyester and polyamide fabrics. Consequently, it was found that the model predicts with a good accuracy the ultimate stab resistance of the sample fabrics. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Laboratory evaluation of thermal protective clothing performance upon hot liquid splash.

PubMed

Gholamreza, Farzan; Song, Guowen

2013-07-01

This study provides an understanding of heat and mass transfer through materials exposed to hot liquid splash, a relatively unexplored hazard in the safety clothing industry. Selected fabrics and layered systems were exposed to three hot liquids to study the effects of hot liquids and configuration. To explore the energy transfer mechanisms, a modified apparatus (based on ASTM F 2701-08) was developed to assess the protection performance provided by a fabric when exposed to a hot liquid. The modified test method allows measurement of the energy absorbed by the sensor, and with the use of a skin model, the time required to produce a second-degree burn injury was predicted. The preliminary testing demonstrated that mass transfer of the hot liquid through the fabric is the main factor contributing to burn injury. Key factors that determine the level of protection that a fabric system provides are summarized.

Algor mortis: an erroneous measurement following postmortem refrigeration.

PubMed

Wardak, Khalil S; Cina, Stephen J

2011-09-01

Determination of the time of death is one goal of medicolegal death investigations. Algor mortis has been used as a measure of the postmortem interval (PMI). We prospectively recorded the core temperatures of 19 adult bodies entering our morgue cooler and at 3, 6, and 9 h of refrigeration. We then compared the cooling rate with the calculated body mass index (BMI). For each individual body, the rate of cooling was fairly linear with no evidence of a plateau. There was fair to moderate correlation between the BMI and the cooling rate: cooling rate = -0.052 (BMI) + 3.52. The probability of linearity in any given case was 36%. Variables affecting this correlation included the presence and the layers of clothing and if the clothing was wet. Our data confirm that algor mortis is of very limited utility in determining the PMI in bodies that have been refrigerated. © 2011 American Academy of Forensic Sciences.

Method of making carbon-carbon composites

DOEpatents

Engle, Glen B.

1993-01-01

A process for making 2D and 3D carbon-carbon composites having a combined high crystallinity, high strength, high modulus and high thermal and electrical conductivity. High-modulus/high-strength mesophase derived carbon fibers are woven into a suitable cloth. Layers of this easily graphitizible woven cloth are infiltrated with carbon material to form green composites. The carbonized composite is then impregnated several times with pitch by covering the composite with hot pitch under pressure. The composites are given a heat treatment between each impregnant step to crack up the infiltrated carbon and allow additional pitch to enter the microstructure during the next impregnation cycle. The impregnated composites are then given a final heat treatment in the range 2500.degree. to 3100.degree. C. to fully graphitize the fibers and the matrix carbon. The composites are then infiltrated with pyrolytic carbon by chemical vapor deposition in the range 1000.degree. C. to 1300.degree. C. at a reduced. pressure.

A vertical wall in the Whittard Canyon with a novel community assemblage

NASA Astrophysics Data System (ADS)

Johnson, Mark; White, Martin; Wilson, Annette; Wuerzberg, Laura; Schwabe, Enrico; Folch, Helka; Allcock, Louise

2013-04-01

We describe a hitherto unreported community from a vertical wall in the Whittard Canyon system on the Atlantic Margin. The wall extended vertically for about 100 m from approximately 750 m depth. We explored the wall with an ROV and discovered an assemblage cominated by large limid bivalves Acesta excavata and deep-water oysters Neopycnodonte zibrowii at very high densities, particularly at overhangs. The assemblage also contained deep-water corals (including solitary corals). It had high numbers of flytrap anemones and had many mobile species associated with it including crustaceans such as Paramola cuvieri and Bathynectes longispina, echinoderms and fishes. We took CTD transects in the area of the wall and beam attenuation indicated nepheloid layers present in the water column. The greatest densities of suspended material at the ROV dive site were at the depth of the wall. We hypothesise that internal waves concentrate suspended sediment at the foot of the vertical wall. This may provide the resources to support the high density of large filter feeders at these depths.

[Taphonomy of the gastropod cf. Donaldina robusta (Heterobranchia: Streptacididae) from the Middle Pennsylvanian, La Joya Formation, Sonora, Mexico].

PubMed

Gómez E, Catalina; Buitrón S, Blanca; Vachard, Daniel

2010-03-01

Gastropods are an important component in most of the fossil record; however, investigations have focused mainly on the characterization of the tafofacies and signatures in determined environments. We present qualitative and quantitative taphonomic data for the gastropod cf. Donaldina robusta assemblages from the La Joya Formation of the Sierra Agua Verde, Sonora State, (NW) Mexico. We analyzed 176 shells. Good preservation received ahigh taphonomic grade (A) and poor preservation a D. The shells were complete in 72% of cases (taphonomic grade B). Less than 10% are corroded or are parallel to the layer (grade A). This rock is petrographycally classified as wackestone, sedimentologically it is characterized by middle sorting (grade B) and low grading (grade A). The fossiliferous assemblage grades as A and B. Biostratinomic features of the skeletal assemblage are characteristic of sedimentologic concentrations of autochthonous-parautochthonous elements at the accumulation site. There was minimal reworking and transport in an environment of low energy, locally produced during a short period of accumulation.

The Investigation and Development of Low Cost Hardware Components for Proton-Exchange Membrane Fuel Cells - Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

George A. Marchetti

1999-12-15

Proton exchange membrane (PEM) fuel cell components, which would have a low-cost structure in mass production, were fabricated and tested. A fuel cell electrode structure, comprising a thin layer of graphite (50 microns) and a front-loaded platinum catalyst layer (600 angstroms), was shown to produce significant power densities. In addition, a PEM bipolar plate, comprising flexible graphite, carbon cloth flow-fields and an integrated polymer gasket, was fabricated. Power densities of a two-cell unit using this inexpensive bipolar plate architecture were shown to be comparable to state-of-the-art bipolar plates.

Meteoroid and Debris Impact Features Documented on the Long Duration Exposure Facility

DTIC Science & Technology

1990-08-01

surfaces was very different from the hole production (penetration) mechanism in true thin films; the laminated structure was never actually penetrated...16 METEOROID & DEBRIS SPECIAL INVESTIGATION GROUP Impacts into laminated polymeric films, such as the Kapton test specimens on experiment A0138...several layers of carbon, glass, and/or Kevlar woven fiber cloth laminated together with resin binders. Impact features in these materials were

10 CFR Appendix J1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Automatic and Semi-Automatic Clothes...

Code of Federal Regulations, 2010 CFR

2010-01-01

... characteristics of the clothes load placed in the clothes container, without allowing or requiring consumer... weight of the clothes load placed in the clothes container, without allowing or requiring consumer....4Clothes container means the compartment within the clothes washer that holds the clothes during the...

Application of atmospheric-pressure plasma jet processed carbon nanotubes to liquid and quasi-solid-state gel electrolyte supercapacitors

NASA Astrophysics Data System (ADS)

Kuok, Fei-Hong; Kan, Ken-Yuan; Yu, Ing-Song; Chen, Chieh-Wen; Hsu, Cheng-Che; Cheng, I.-Chun; Chen, Jian-Zhang

2017-12-01

We use a dc-pulse nitrogen atmospheric-pressure plasma jet (APPJ) to calcine carbon nanotubes (CNTs) pastes that are screen-printed on carbon cloth. 30-s APPJ treatment can efficiently oxidize and vaporize the organic binders, thereby forming porous structures. As indicated by X-ray photoelectron spectroscopy (XPS) and electron probe microanalysis (EPMA), the oxygen content decreases after APPJ treatment owing to the oxidation and vaporization of ethyl cellulose, terpineol, and ethanol. Nitrogen doping was introduced to the materials by the nitrogen APPJ. APPJ-calcination improves the wettability of the CNTs printed on carbon cloth, as evidenced by water contact angle measurement. Raman spectroscopy indicates that reactive species of nitrogen APPJ react violently with CNTs in only 30-s APPJ processing time and introduce defects and/or surface functional groups on CNTs. Carbon cloths with calcined CNT layers are used as electrodes for liquid and quasi-solid-state electrolyte supercapacitors. Under a cyclic voltammetry test with a 2 mV/s potential scan rate, the specific capacitance is 73.84 F/g (areal capacitance = 5.89 mF/cm2) with a 2 M KCl electrolyte and 66.47 F/g (areal capacitance = 6.10 mF/cm2) with a H2SO4/polyvinyl alcohol (PVA) gel electrolyte.

fiReproxies: A computational model providing insight into heat-affected archaeological lithic assemblages.

PubMed

Sorensen, Andrew C; Scherjon, Fulco

2018-01-01

Evidence for fire use becomes increasingly sparse the further back in time one looks. This is especially true for Palaeolithic assemblages. Primary evidence of fire use in the form of hearth features tends to give way to clusters or sparse scatters of more durable heated stone fragments. In the absence of intact fireplaces, these thermally altered lithic remains have been used as a proxy for discerning relative degrees of fire use between archaeological layers and deposits. While previous experimental studies have demonstrated the physical effects of heat on stony artefacts, the mechanisms influencing the proportion of fire proxy evidence within archaeological layers remain understudied. This fundamental study is the first to apply a computer-based model (fiReproxies) in an attempt to simulate and quantify the complex interplay of factors that ultimately determine when and in what proportions lithic artefacts are heated by (anthropogenic) fires. As an illustrative example, we apply our model to two hypothetical archaeological layers that reflect glacial and interglacial conditions during the late Middle Palaeolithic within a generic simulated cave site to demonstrate how different environmental, behavioural and depositional factors like site surface area, sedimentation rate, occupation frequency, and fire size and intensity can, independently or together, significantly influence the visibility of archaeological fire signals.

fiReproxies: A computational model providing insight into heat-affected archaeological lithic assemblages

PubMed Central

Scherjon, Fulco

2018-01-01

Evidence for fire use becomes increasingly sparse the further back in time one looks. This is especially true for Palaeolithic assemblages. Primary evidence of fire use in the form of hearth features tends to give way to clusters or sparse scatters of more durable heated stone fragments. In the absence of intact fireplaces, these thermally altered lithic remains have been used as a proxy for discerning relative degrees of fire use between archaeological layers and deposits. While previous experimental studies have demonstrated the physical effects of heat on stony artefacts, the mechanisms influencing the proportion of fire proxy evidence within archaeological layers remain understudied. This fundamental study is the first to apply a computer-based model (fiReproxies) in an attempt to simulate and quantify the complex interplay of factors that ultimately determine when and in what proportions lithic artefacts are heated by (anthropogenic) fires. As an illustrative example, we apply our model to two hypothetical archaeological layers that reflect glacial and interglacial conditions during the late Middle Palaeolithic within a generic simulated cave site to demonstrate how different environmental, behavioural and depositional factors like site surface area, sedimentation rate, occupation frequency, and fire size and intensity can, independently or together, significantly influence the visibility of archaeological fire signals. PMID:29768454

The ‘Goldilocks’ effect: preservation bias in vertebrate track assemblages

PubMed Central

Falkingham, P. L.; Bates, K. T.; Margetts, L.; Manning, P. L.

2011-01-01

Finite-element analysis was used to investigate the extent of bias in the ichnological fossil record attributable to body mass. Virtual tracks were simulated for four dinosaur taxa of different sizes (Struthiomimus, Tyrannosaurus, Brachiosaurus and Edmontosaurus), in a range of substrate conditions. Outlines of autopodia were generated based upon osteology and published soft-tissue reconstructions. Loads were applied vertically to the feet equivalent to the weight of the animal, and distributed accordingly to fore- and hindlimbs where relevant. Ideal, semi-infinite elastic–plastic substrates displayed a ‘Goldilocks’ quality where only a narrow range of loads could produce tracks, given that small animals failed to indent the substrate, and larger animals would be unable to traverse the area without becoming mired. If a firm subsurface layer is assumed, a more complete assemblage is possible, though there is a strong bias towards larger, heavier animals. The depths of fossil tracks within an assemblage may indicate thicknesses of mechanically distinct substrate layers at the time of track formation, even when the lithified strata appear compositionally homogeneous. This work increases the effectiveness of using vertebrate tracks as palaeoenvironmental indicators in terms of inferring substrate conditions at the time of track formation. Additionally, simulated undertracks are examined, and it is shown that complex deformation beneath the foot may not be indicative of limb kinematics as has been previously interpreted, but instead ridges and undulations at the base of a track may be a function of sediment displacement vectors and pedal morphology. PMID:21233145

Illumination angle and layer thickness influence on the photo current generation in organic solar cells: A combined simulative and experimental study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mescher, Jan, E-mail: jan.mescher@kit.edu; Mertens, Adrian; Egel, Amos

2015-07-15

In most future organic photovoltaic applications, such as fixed roof installations, facade or clothing integration, the solar cells will face the sun under varying angles. By a combined simulative and experimental study, we investigate the mutual interdependencies of the angle of light incidence, the absorber layer thickness and the photon harvesting efficiency within a typical organic photovoltaic device. For thin absorber layers, we find a steady decrease of the effective photocurrent towards increasing angles. For 90-140 nm thick absorber layers, however, we observe an effective photocurrent enhancement, exhibiting a maximum yield at angles of incidence of about 50°. Both effectsmore » mainly originate from the angle-dependent spatial broadening of the optical interference pattern inside the solar cell and a shift of the absorption maximum away from the metal electrode.« less

Illumination angle and layer thickness influence on the photo current generation in organic solar cells: A combined simulative and experimental study

NASA Astrophysics Data System (ADS)

Mescher, Jan; Mertens, Adrian; Egel, Amos; Kettlitz, Siegfried W.; Lemmer, Uli; Colsmann, Alexander

2015-07-01

In most future organic photovoltaic applications, such as fixed roof installations, facade or clothing integration, the solar cells will face the sun under varying angles. By a combined simulative and experimental study, we investigate the mutual interdependencies of the angle of light incidence, the absorber layer thickness and the photon harvesting efficiency within a typical organic photovoltaic device. For thin absorber layers, we find a steady decrease of the effective photocurrent towards increasing angles. For 90-140 nm thick absorber layers, however, we observe an effective photocurrent enhancement, exhibiting a maximum yield at angles of incidence of about 50°. Both effects mainly originate from the angle-dependent spatial broadening of the optical interference pattern inside the solar cell and a shift of the absorption maximum away from the metal electrode.

10 CFR 431.152 - Definitions concerning commercial clothes washers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Definitions concerning commercial clothes washers. 431.152... clothes washers. Commercial clothes washer means a soft-mounted front-loading or soft-mounted top-loading clothes washer that— (1) Has a clothes container compartment that— (i) For horizontal-axis clothes washers...

Quaternary paleoceanography of the deep Arctic Ocean based on quantitative analysis of Ostracoda

USGS Publications Warehouse

Cronin, T. M.; Holtz, T.R.; Whatley, R.C.

1994-01-01

Ostracodes were studied from deep Arctic Ocean cores obtained during the Arctic 91 expedition of the Polarstern to the Nansen, Amundsen and Makarov Basins, the Lomonosov Ridge, Morris Jesup Rise and Yermak Plateau, in order to investigate their distribution in Arctic Ocean deep water (AODW) and apply these data to paleoceanographic reconstruction of bottom water masses during the Quaternary. Analyses of coretop assemblages from Arctic 91 boxcores indicate the following: ostracodes are common at all depths between 1000 and 4500 m, and species distribution is strongly influenced by water mass characteristics and bathymetry; quantitative analyses comparing Eurasian and Canada Basin assemblages indicate that distinct assemblages inhabit regions east and west of the Lomonosov Ridge, a barrier especially important to species living in lower AODW; deep Eurasian Basin assemblages are more similar to those living in Greenland Sea deep water (GSDW) than those in Canada Basin deep water; two upper AODW assemblages were recognized throughout the Arctic Ocean, one living between 1000 and 1500 m, and the other, having high species diversity, at 1500-3000 m. Downcore quantitative analyses of species' abundances and the squared chord distance coefficient of similarity reveals a distinct series of abundance peaks in key indicator taxa interpreted to signify the following late Quaternary deep water history of the Eurasian Basin. During the Last Glacial Maximum (LGM), a GSDW/AODW assemblage, characteristic of cold, well oxygenated deep water > 3000 m today, inhabited the Lomonosov Ridge to depths as shallow as 1000 m, perhaps indicating the influence of GSDW at mid-depths in the central Arctic Ocean. During Termination 1, a period of high organic productivity associated with a strong inflowing warm North Atlantic layer occurred. During the mid-Holocene, several key faunal events indicate a period of warming and/or enhanced flow between the Canada and Eurasian Basins. A long-term record of ostracode assemblages from kastenlot core PS2200-5 (1073 m water depth) from the Morris Jesup Rise indicates a quasi-cyclic pattern of water mass changes during the last 300 kyr. Interglacial ostracode assemblages corresponding to oxygen isotope stages 1, 5, and 7 indicate rapid changes in dissolved oxygen and productivity during glacial-interglacial transitions. ?? 1994.

Metastable Phase Relations in the System Ca(sub O)-Al2(sub O)3-MgO-TiO(sub 2): Applications to Ca- And Al-Rich Inclusions

NASA Technical Reports Server (NTRS)

Keller, L. P.; Han, J.

2017-01-01

Introduction: High temperature phases such as corundum, hibonite, grossite, and perovskite are among the earliest phases that condensed in the early solar nebula. Recent work has shown that defect-structured phases occur in some ultrarefractory inclusions as metastable, possibly more kinetically-favored alternatives to the thermodynamically predicted stable phase assemblages [1-4]. For example, Han et al. have shown that non-stoichiometry in hibonite is accommodated by extra "spinel" blocks in the structure instead of the equilibrium assemblages hibonite+corundum or hibonite+spinel. To explore these relations, we have conducted a series of experiments in the system CaO-Al2O3- MgO-TiO2. Here we discuss the compositions and mineralogy of the experimental samples and how they relate to phases in refractory inclusions with a focus on perovskite and spinel. Methods: For the series of annealing studies, a CaO-Al2O3 eutectic melt is allowed to react with a pure alumina crucible at 1,530degC for either 4 hours or 5 days, followed by quenching in air. Later experiments were similar except that additions of 5 wt% MgO, and CaTiO(sub 3) were used to explore the effect of minor elements on the phase assemblages. The experimental conditions resulted in reaction zones approximately 100-300 ?m wide consisting of a hibonite layer immediately adjacent to the corundum, followed by a grossite layer, and finally krotite with residual quenched melt. For the experiments with Mg, spinel is distributed in all layers but is mainly concentrated in the krotite layer. In the Ti-bearing experiments, perovskite precipitated in association with the krotite and residual melt. In addition to the experiments, we also analyzed perovskite grains in the FUN inclusion SHAL [5] and a large compact type A CAI from Allende. The experiments and refractory inclusions were analyzed using a JEOL 7600F SEM and quantitative analyses were obtained using the JEOL 8530F field-emission electron microprobe.

Changes in the northern Adriatic molluscan community from the Holocene transgression up to the present

NASA Astrophysics Data System (ADS)

Gallmetzer, Ivo; Haselmair, Alexandra; Tomasovych, Adam; Stachowitsch, Michael; Zuschin, Martin

2016-04-01

The northern Adriatic Sea is one of the few modern, epicontinental seas comparable to typical Palaeozoic shelf environments. It has a shallow average water depth (<50 m) and was formed at the end of the last glaciation when the sea level rose. Since historical times this part of the Adriatic has been strongly influenced by human activities through multiple direct or indirect impacts (e.g. fishing, coastal building development, pollution, eutrophication, increased sedimentation), making it one of the most degraded marine ecosystems worldwide. Our study was designed to reconstruct major environmental changes here since the onset of the Holocene transgression using down-core changes in death assemblages of molluscs as indicators for ecological shifts. The sediment cores were taken at three different stations (Brijuni Islands, Croatia, off Piran, Slovenia, and off Venice, Italy), each representative of specific sediment and nutrient conditions and degrees of habitat exploitation. The cores were 1.5 m long and had diameters of 90 or 160 mm. For the molluscan shell analyses, sediment subsamples were examined for species composition, abundance, taxonomic similarity and ecological interactions (e.g. frequencies of drilling predation). In total, 98,700 valves and shells were investigated and 113 bivalve and 178 gastropod species recorded. Sedimentation rates derived from 210Pb dating are very low, between 0.15 cm/yr at Brijuni and 0.25 cm/yr at Piran. The dating of Lucinella divaricata, Timoclea ovata and Gouldia minima shells with 14C calibrated amino-acid racemisation (AAR) revealed that the cores at all three stations cover at least 6000 to 8000 years, i.e. the whole Holocene transgression period. Time averaging is high, especially in the lower core layers of Piran station, probably due to strong bioturbation. Surface mixed-layer assemblages tend to show right-skewed postmortem age-frequency distributions, whereas subsurface assemblages show unimodal or uniform shapes. Molluscan assemblages show significant interregional differences that correlate with sedimentation rate, grain size, and the occurrence of organic pollutants and heavy metals. Down-core changes in molluscan communities are also conspicuous in all cores. They partly reflect long-term changes in water depth, vegetation cover or grain size distribution caused by natural fluctuations of environmental conditions over the past millennia. In the uppermost core layers, however, these changes can be interpreted as indicators of anthropogenic impacts.

Clay-mineral assemblages from some levels of K-118 drill core of Maha Sarakham evaporites, northeastern Thailand

NASA Astrophysics Data System (ADS)

Suwanich, Parkorn

Clay-mineral assemblages in Middle Clastic, Middle Salt, Lower Clastic, Potash Zone, and Lower Salt, totalling 13 samples from K-118 drill core, in the Maha Sarakham Formation, Khorat Basin, northeastern Thailand were studied. The clay-size particles were separated from the water-soluble salt by water leaching. Then the samples were leached again in the EDTA solution and separated into clay-size particles by using the timing sedimentation. The EDTA-clay residues were divided and analyzed by using the XRD and XRF method. The XRD peaks show that the major-clay minerals are chlorite, illite, and mixed-layer corrensite including traces of rectorite? and paragonite? The other clay-size particles are quartz and potassium feldspar. The XRF results indicate Mg-rich values and moderate MgAl atom ratio values in those clay minerals. The variable Fe, Na, and K contents in the clay-mineral assemblages can explain the environment of deposition compared to the positions of the samples from the core. Hypothetically, mineralogy and the chemistry of the residual assemblages strongly indicate that severe alteration and Mg-enrichment of normal clay detritus occurred in the evaporite environment through brine-sediment interaction. The various Mg-enrichment varies along the various members reflecting whether sedimentation is near or far from the hypersaline brine.

PyXRD v0.6.7: a free and open-source program to quantify disordered phyllosilicates using multi-specimen X-ray diffraction profile fitting

NASA Astrophysics Data System (ADS)

Dumon, M.; Van Ranst, E.

2016-01-01

This paper presents a free and open-source program called PyXRD (short for Python X-ray diffraction) to improve the quantification of complex, poly-phasic mixed-layer phyllosilicate assemblages. The validity of the program was checked by comparing its output with Sybilla v2.2.2, which shares the same mathematical formalism. The novelty of this program is the ab initio incorporation of the multi-specimen method, making it possible to share phases and (a selection of) their parameters across multiple specimens. PyXRD thus allows for modelling multiple specimens side by side, and this approach speeds up the manual refinement process significantly. To check the hypothesis that this multi-specimen set-up - as it effectively reduces the number of parameters and increases the number of observations - can also improve automatic parameter refinements, we calculated X-ray diffraction patterns for four theoretical mineral assemblages. These patterns were then used as input for one refinement employing the multi-specimen set-up and one employing the single-pattern set-ups. For all of the assemblages, PyXRD was able to reproduce or approximate the input parameters with the multi-specimen approach. Diverging solutions only occurred in single-pattern set-ups, which do not contain enough information to discern all minerals present (e.g. patterns of heated samples). Assuming a correct qualitative interpretation was made and a single pattern exists in which all phases are sufficiently discernible, the obtained results indicate a good quantification can often be obtained with just that pattern. However, these results from theoretical experiments cannot automatically be extrapolated to all real-life experiments. In any case, PyXRD has proven to be useful when X-ray diffraction patterns are modelled for complex mineral assemblages containing mixed-layer phyllosilicates with a multi-specimen approach.

Shopping for clothes: Body satisfaction, appearance investment, and functions of clothing among female shoppers.

PubMed

Tiggemann, Marika; Lacey, Catherine

2009-09-01

The present study aimed to investigate the link between clothing and body experience in women of different ages. Participants were 162 female clothes shoppers between the ages of 18 and 55 who completed questionnaire measures of body image, functions of clothing, self-esteem, and enjoyment of clothes shopping. It was found that clothing was worn primarily for assurance and fashion by women of all ages. On the other hand, BMI and body dissatisfaction were related to the use of clothing for camouflage purposes and to a more negative clothes shopping experience. Both components of appearance investment were related to choice of clothes for fashion and assurance. However, the self-evaluative salience component was negatively related, while the motivational salience was positively related, to enjoyment of clothes shopping. It was concluded that although clothing is an under-researched aspect of body image, it represents an important part of women's appearance management, whatever their age.

Delta-associated molluscan life and death assemblages in the northern Adriatic Sea: Implications for paleoecology, regional diversity and conservation.

PubMed

Weber, Kristina; Zuschin, Martin

2013-01-15

Life-death (LD) studies of shelly macrofauna are important to evaluate how well a fossil assemblage can reflect the original living community, but can also serve as a proxy for recent ecological shifts in marine habitats and in practice this has to be distinguished using taphonomic preservation pattern and estimates of time-averaging. It remains to be rigorously evaluated, however, how to distinguish between sources of LD disagreement. In addition, death assemblages (DAs) also preserve important information on regional diversity which is not available from single censuses of the life assemblages (LAs). The northern Adriatic Sea is an ecosystem under anthropogenic pressure, and we studied the distribution and abundance of living and dead bivalve and gastropod species in the physically stressful environments (tidal flat and shallow sublittoral soft bottoms) associated with the delta of the Isonzo River (Gulf of Trieste). Specifically we evaluated the fidelity of richness, evenness, abundance, habitat discrimination and beta diversity. A total of 10,740 molluscs from fifteen tidal flat and fourteen sublittoral sites were analyzed for species composition and distribution of living and dead molluscs. Of 78 recorded species, only eleven were numerically abundant. There were many more dead than living individuals and rarefied species richness in the DA was higher at all spatial scales, but the differences are lower in habitats and in the region than at individual stations. Evenness was always higher in death assemblages, and probably due to temporally more variable LAs the differences are stronger in the sublittoral habitats. Distinct assemblages characterized intertidal and sublittoral habitats, and the distribution and abundance of empty shells generally corresponded to that of the living species. Death assemblages have lower beta diversity than life assemblages, but empty shells capture compositional differences between habitats to a higher degree than living shells. More samples would be necessary to account for the diversity of living molluscs in the study area, which is, however, well recorded in the death assemblages. There is no indication of a major environmental change over the last decades in this area, but due to the long history of anthropogenic pressure here, such a potential impact might be preserved in historical layers of the deeper sedimentary record.

Blueschists and eclogites from southern Sifnos (Cyclades, Greece)

NASA Astrophysics Data System (ADS)

Weil, Jonas; Petrakakis, Konstantin; Grasemann, Bernhard; Iglseder, Christoph

2010-05-01

Eclogite/blueschist facies rocks from northern Sifnos (Cyclades) are well known and have been described by many authors. A small occurrence of similar rocks in the south-west of Sifnos has been investigated and is compared to other occurrences in terms of their mineral assemblages, chemistry, petrography and structural position. The tectono-metamorphic evolution on Sifnos is characterized by a regional blueschist / eclogite facies metamorphism (M1) during the Eocene, followed by a regional Oligo-Miocene medium pressure overprint (M2). The investigated rocks from the Fikiada Bay area formed during M1 but were overprinted by a brittle / ductile M2 event. The high-pressure rock assemblage of Fikiada bay represents a sequence of metabasites, metaacidites, and metasediments with a foliation-parallel compositional layering. Rootless isoclinal folding of the regional foliation is common with fold axes trending roughly NW-SE; hinges are overprinted by later axial foliation planes. The foliation is well developed and mostly dips to N to E, the main pervasive stretching lineation is shallow and plunging to NE. Grt- rich dark blueschists, bearing eclogite-boudins of some dm size, alternate with lighter Qtz-rich Grt-bearing, cm to m thick layers. Massive, very coarse grained Ep+Chl+Ab -rich gneisses form layers with up to 3 m thickness. Metasediments comprise light Cal-rich gneisses as well as metapelites and quartzites. These lithologies are overlain by highly strained calcite marbles bearing boudins of Dol-marble. Foliation, stretching lineation and isoclinal folds show the same orientation as in the silicates. The blueschists show the characteristic assemblage Gln + Grt + Ep + Ab + Phg + Pg +Qtz (+Cal) + Mag. Inclusions in large poikiloblastic Grt reveal an earlier compositional layering: Domains with conserved foam microstructures of Qtz and domains of massive Grt including relics of Jd (XNa = 0.9), Ctd, Ep, Rt and Mag. Gln shows a zonal pattern with Mg-rich cores to ferro-glaucophane and crossite- richer rims. Ep is zoned too with decreasing Fe from core to rim, while Grt-poikiloblasts are nearly homogeneous in composition. Eclogitic assemblages consist of Grt + Omp + Ep + Phg + Gln ± Qtz. A greenschist-facies overprint accompanied by Fe- and CO2- rich fluids is mostly evident along shear bands of variable thickness from thin section to outcrop scale. It is best documented by the growth of syntectonic Ab+Chl neoblasts. Metabasite layers intercalated with the marble show a pervasive greenschist-facies overprint with extensive, neoblastic growth of Chl an Ab. Early Ep remains unaffected, but Gln and Grt are preserved only as relics. Petrography and mineral chemistry of southern Sifnos HP-rocks comply with the occurrence in northern Sifnos (e.g. comprehensive description by Schliestedt 1986) References: Schliestedt, M., 1986. Eclogite-blueschist relationships as evidenced by mineral equilibria in the high-pressure rocks of Sifnos (Cycladic islands), Greece. Journal of Petrology, 27,1437-1459 Mineral abbreviations after Kretz, 1983: Symbols for rock-forming minerals. American Mineralogist, 68, 277-279

Three-Dimensional Hierarchical Structure ZnO@C@NiO on Carbon Cloth for Asymmetric Supercapacitor with Enhanced Cycle Stability.

PubMed

Ouyang, Yu; Xia, Xifeng; Ye, Haitao; Wang, Liang; Jiao, Xinyan; Lei, Wu; Hao, Qingli

2018-01-31

In this work, we synthesized the hierarchical ZnO@C@NiO core-shell nanorods arrays (CSNAs) grown on a carbon cloth (CC) conductive substrate by a three-step method involving hydrothermal and chemical bath methods. The morphology and chemical structure of the hybrid nanoarrays were characterized in detail. The combination and formation mechanism was proposed. The conducting carbon layer between ZnO and NiO layers can efficiently enhance the electric conductivity of the integrated electrodes, and also protect the corrosion of ZnO in an alkaline solution. Compared with ZnO@NiO nanorods arrays (NAs), the NiO in CC/ZnO@C@NiO electrodes, which possess a unique multilevel core-shell nanostructure exhibits a higher specific capacity (677 C/g at 1.43 A/g) and an enhanced cycling stability (capacity remain 71% after 5000 cycles), on account of the protection of carbon layer derived from glucose. Additionally, a flexible all-solid-state supercapacitor is readily constructed by coating the PVA/KOH gel electrolyte between the ZnO@C@NiO CSNAs and commercial graphene. The energy density of this all-solid-state device decreases from 35.7 to 16.0 Wh/kg as the power density increases from 380.9 to 2704.2 W/kg with an excellent cycling stability (87.5% of the initial capacitance after 10000 cycles). Thereby, the CC/ ZnO@C@NiO CSNAs of three-dimensional hierarchical structure is promising electrode materials for flexible all-solid-state supercapacitors.

A new Lower Pleistocene archeological site in Europe (Vallparadís, Barcelona, Spain)

PubMed Central

Martínez, Kenneth; Garcia, Joan; Carbonell, Eudald; Agustí, Jordi; Bahain, Jean-Jaques; Blain, Hugues-Alexandre; Burjachs, Francesc; Cáceres, Isabel; Duval, Mathieu; Falguères, Christophe; Gómez, Manuel; Huguet, Rosa

2010-01-01

Here we report the discovery of a new late Lower Pleistocene site named Vallparadís (Barcelona, Spain) that produced a rich archeological and paleontological sequence dated from the upper boundary of the Jaramillo subchron to the early Middle Pleistocene. This deposit contained a main archeological layer with numerous artifacts and a rich macromammalian assemblage, some of which bore cut marks, that could indicate that hominins had access to carcasses. Paleomagnetic analysis, electron spin resonance-uranium series (ESR-US), and the biostratigraphic chronological position of the macro- and micromammal and lithic assemblages of this layer reinforce the proposal that hominins inhabited Europe during the Lower Pleistocene. The archeological sequence provides key information on the successful adaptation of European hominins that preceded the well-known fossil population from Atapuerca and succeeded the finds from Orce basin. Hence, this discovery enables us to close a major chronological gap in the early prehistory of Iberia. According to the information in this paper and the available data from these other sites, we propose that Mediterranean Western Europe was repeatedly and perhaps continuously occupied during the late Matuyama chron. PMID:20231433

Effects of wearing aircrew protective clothing on physiological and cognitive responses under various ambient conditions.

PubMed

Faerevik, Hilde; Reinertsen, Randi Eidsmo

2003-06-20

Heat stress can be a significant problem for pilots wearing protective clothing during flights, because they provide extra insulation which prevents evaporative heat loss. Heat stress can influence human cognitive activity, which might be critical in the flying situation, requiring efficient and error-free performance. This study investigated the effect of wearing protective clothing under various ambient conditions on physiological and cognitive performance. On several occasions, eight subjects were exposed for 3 h to three different environmental conditions; 0 degrees C at 80% RH, 23 degrees C at 63% RH and 40 degrees C at 19% RH. The subjects were equipped with thermistors, dressed as they normally do for flights (including helmet, two layers of underwear and an uninsulated survival suit). During three separate exposures the subjects carried out two cognitive performance tests (Vigilance test and DG test). Performance was scored as correct, incorrect, missed reaction and reaction time. Skin temperature, deep body temperature, heart rate, oxygen consumption, temperature and humidity inside the clothing, sweat loss, subjective sensation of temperature and thermal comfort were measured. Rises in rectal temperature, skin temperature, heart rate and body water loss indicated a high level of heat stress in the 40 degrees C ambient temperature condition in comparison with 0 degrees C and 23 degrees C. Performance of the DG test was unaffected by ambient temperature. However, the number of incorrect reactions in the Vigilance test was significantly higher at 40 degrees C than at 23 degrees C (p = 0.006) or 0 degrees C (p = 0.03). The effect on Vigilance performance correlated with changes in deep-body temperature, and this is in accordance with earlier studies that have demonstrated that cognitive performance is virtually unaffected unless environmental conditions are sufficient to change deep body temperature.

Decontamination of clothing and building materials associated with the clandestine production of methamphetamine.

PubMed

Serrano, Kate A; Martyny, John W; Kofford, Shalece; Contreras, John R; Van Dyke, Mike V

2012-01-01

This study was designed to determine how easily methamphetamine can be removed from clothing and building materials, utilizing different cleaning materials and methods. The study also addressed the penetration of methamphetamine into drywall and the ability of paints to encapsulate the methamphetamine on drywall. Clothing and building materials were contaminated in a stainless steel chamber by aerosolizing methamphetamine in a beaker heater. The amount of methamphetamine surface contamination was determined by sampling a grid pattern on the material prior to attempting to clean the materials. After cleaning, the materials were again sampled, and the degree of decontamination noted. We found that household clothing and response gear worn by first responders was easily decontaminated using a household detergent in a household washing machine. A single wash removed over 95% of the methamphetamine from these materials. The study also indicated that methamphetamine-contaminated, smooth non-porous surfaces can be easily cleaned to below detectable levels using only mild cleaners. More porous surfaces such as plywood and drywall were unlikely to be decontaminated to below regulatory levels even with three washes using a mild cleaner. This may be due to methamphetamine penetration into the paint on these surfaces. Evaluation of methamphetamine contamination on drywall indicated that approximately 40% of the methamphetamine was removed using a wipe, while another 60% remained in the paint layer. Stronger cleaners such as those with active ingredients including sodium hypochlorite or quaternary ammonia and commercial decontamination agents were more effective than mild detergent-based cleaners and may reduce methamphetamine contamination to below regulatory levels. Results from the encapsulation studies indicate that sprayed on oil-based paint will encapsulate methamphetamine on drywall and plywood surfaces up to 4.5 months, while latex paints were less effective.

Design Guide: Designing and Building High Voltage Power Supplies. Volume 2

DTIC Science & Technology

1988-08-01

and edges. * Isolation system: * One layer ol’ Tedlar: or type 120 glass fabric with a compatible resin : or finish. 199 5.4.2 Composite Joints...plastics Cellulose esters Asphalt Cork Chloride flux Epoxy resins Copper (bare) Masonite Fiber board Melamine resins Greases Nylon Polyvinyl chloride resins ...cycloaliphatic epoxy to a level inferior to the porcelain. In one application having a glass -cloth epoxy- based laminate coated with cycloaliphatic epoxy the

Miniature Autonomous Rocket Recovery System (MARRS)

DTIC Science & Technology

2011-05-01

composed of approximately 4 to 6 cubic centimeters of FFFF black powder. C. Rocket System Structure The rocket body was an epoxy-laden phenolic ... Kevlar line upon which was the lower main parachute; a 50” Rocket Rage Parachute. The booster had a 70” Rocket Rage parachute. In order to protect...the parachutes from burns, the parachutes were wrapped in protective Kevlar cloth and a layer of flame-retardant cellulose was packed in between the

Thermal Imaging for Clothing Research - A Review of the Literature

DTIC Science & Technology

1976-05-01

i) UNCLASSIFIED UNCLASSIFIED TABLE OF CONTENTS - Continued Page 6. INFRARED DETECTORS (continued) 6.3 THERMOCHROMIC MATERIALS - CUPROUS MERCURIC...human body originates at the outer layer of skin was verified. 2.2 MEASURED VALUES OF EMISSIVITY An experimental approach to emissivities was made by D...the 500 - 600 nm range of the visible, which incidentally is where the solar spectrum is at a maximum. Thus the visible reflectance of a material

Analysis of mixed-layer clay mineral structures

USGS Publications Warehouse

Bradley, W.F.

1953-01-01

Among the enormously abundant natural occurrences of clay minerals, many examples are encountered in which no single specific crystallization scheme extends through a single ultimate grain. The characterization of such assemblages becomes an analysis of the distribution of matter within such grains, rather than the simple identification of mineral species. It having become established that the particular coordination complex typified by mica is a common component of many natural subcrystalline assemblages, the opportunity is afforded to analyze scattering from random associations of these complexes with other structural units. Successful analyses have been made of mixed hydration states of montmorillonite, of montmorillonite with mica, of vermiculite with mica, and of montmorillonite with chlorite, all of which are variants of the mica complex, and of halloysite with hydrated halloysite.

Nitrification and the ammonia-oxidizing communities in the central Baltic Sea water column

NASA Astrophysics Data System (ADS)

Jäntti, Helena; Ward, Bess B.; Dippner, Joachim W.; Hietanen, Susanna

2018-03-01

The redoxclines that form between the oxic and anoxic water layers in the central Baltic Sea are sites of intensive nitrogen cycling. To gain better understanding of nitrification, we measured the biogeochemical properties along with potential nitrification rates and analyzed the assemblages of ammonia-oxidizing bacteria and archaea using functional gene microarrays. To estimate nitrification in the entire water column, we constructed a regression model for the nitrification rates and applied it to the conditions prevailing in the area in 2008-2012. The highest ammonia oxidation rates were found in a thin layer at the top of the redoxcline and the rates quickly decreased below detection limit when oxygen was exhausted. This is probably because extensive suboxic layers, which are known to harbor pelagic nitrification, are formed only for short periods after inflows in the Baltic Sea. The nitrification rates were some of the highest measured in the water columns, but the thickness of the layer where conditions were favorable for nitrification, was very small and it remained fairly stable between years. However, the depth of the nitrification layer varied substantially between years, particularly in the eastern Gotland Basin (EGB) due to turbulence in the water column. The ammonia oxidizer communities clustered differently between the eastern and western Gotland Basin (WGB) and the composition of ammonia-oxidizing assemblages correlated with the environmental variables. The ammonia oxidizer community composition was more even in the EGB, which may be related to physical instability of the redoxcline that does not allow predominance of a single archetype, whereas in the WGB, where the position of the redoxcline is more constant, the ammonia-oxidizing community was less even. Overall the ammonia-oxidizing communities in the Baltic Sea redoxclines were very evenly distributed compared to other marine environments where microarrays have been applied previously.

The Structure and Properties of Parachute Cloths

NASA Technical Reports Server (NTRS)

Mcnicholas, H J; Hedrick, F

1930-01-01

The requisite properties of a parachute cloth are discussed and the methods for measuring these properties described. In addition to the structural analysis of the cloths, the properties measured were weight, breaking strength, tear resistance, elasticity, and air permeability. Thirty-six silk cloths of domestic manufacture, not previously used in parachute construction are compared with some silk cloths of foreign manufacture. These foreign cloths were ones proven by trial and extended use to be suitable materials for parachute construction. Contrary to the belief that domestic woven cloths were not suitable materials for parachute construction, it is shown that many domestic silk cloths are satisfactory and in some respects superior to the foreign products. Based on a comparative study of all the cloths, specifications are drawn for the manufacture of silk parachute cloth.

[Clothing and heat disorder].

PubMed

Satsumoto, Yayoi

2012-06-01

The influence of the clothing material properties(like water absorbency and rapid dryness, water vapor absorption, water vapor permeability and air permeability) and the design factor of the clothing(like opening condition and fitting of clothing), which contributed to prevent heat disorder, was outlined. WBGT(wet-bulb globe temperature) is used to show a guideline for environmental limitation of activities to prevent heat disorder. As the safety function is more important than thermal comfort for some sportswear and protective clothing with high cover area, clothing itself increases the risk of heat disorder. WBGT is corrected by CAF (clothing adjustment factor) in wearing such kind of protective clothing.

Benthic foraminiferal assemblage formation: Theory and observation for the European Arctic margin

NASA Astrophysics Data System (ADS)

Loubere, Paul; Rayray, Shan

2016-09-01

We use theory and observation to determine how benthic foraminiferal populations living in a range of sedimentary microenvironments are translated into fossil assemblages along the continental margin of the European Arctic. We examine downcore stained (cell tracker green and rose Bengal) and total species shell abundances through the sediment mixing (bioturbation) zone. This, in combination with porewater geochemical measurements, allows us to establish zones of production and destruction for species' shells, and deduce how the fossil record is being generated by the living community. For many taxa, shell production is high in the upper, oxic, sedimentary layer, but destruction in this zone is also high. Hence, contribution to the fossil record is biased to more infaunal populations and species. Taxa producing near, or below, the anoxic boundary of the sediments are particularly important to the developing fossil record of the fjord environment. We find that taxon relative and absolute abundances change continuously through the biologically active sediment profile. This has implications for reconstructing paleoenvironments using benthic foraminiferal assemblages, and potentially for the geochemistry of individual fossil taxa.

Benthic foraminiferal assemblage formation: Theory and observation for the European Arctic Margin

NASA Astrophysics Data System (ADS)

Loubere, Paul; Rayray, Shan

2016-07-01

We use theory and observation to determine how benthic foraminiferal populations living in a range of sedimentary microenvironments are translated into fossil assemblages along the continental margin of the European Arctic. We examine downcore stained (cell tracker green and rose Bengal) and total species shell abundances through the sediment mixing (bioturbation) zone. This, in combination with porewater geochemical measurements, allows us to establish zones of production and destruction for species' shells, and deduce how the fossil record is being generated by the living community. For many taxa, shell production is high in the upper, oxic, sedimentary layer, but destruction in this zone is also high. Hence, contribution to the fossil record is biased to more infaunal populations and species. Taxa producing near, or below, the anoxic boundary of the sediments are particularly important to the developing fossil record of the fjord environment. We find that taxon relative and absolute abundances change continuously through the biologically active sediment profile. This has implications for reconstructing paleoenvironments using benthic foraminiferal assemblages, and potentially for the geochemistry of individual fossil taxa.

Coastal submergence at Ukishima-ga-hara adjacent to the Suruga Trough (eastern Nankai Trough), central Japan, inferred from diatoms and plant macrofossils

NASA Astrophysics Data System (ADS)

Sawai, Y.; Momohara, A.

2017-12-01

Five episodic submergence events during the past 3500 years were recognized at the Ukishima-ga-hara lowland, northern coast of Suruga Trough (eastern Nankai Trough). Coastal submergence in this region was originally reported by Osamu Fujiwara and his colleagues (e.g., Fujiwara et al., 2016) based mainly on changes in lithostratigraphy from a peaty layer that abruptly changed to a light-colored mud and results of microfossil analyses (pollen and diatoms from 57 and 13 samples, respectively). They attributed the submergence events to coseismic deformation associated with earthquakes in the Fujikawa-kako fault zone or Suruga Trough. Here I reevaluated the micropaleontology of this area using 200 samples from 15 cores to reconstruct the full history of coastal submergence during the last few thousand years. The submergence events were shown not by lithostratigraphy but clearly by changes in fossil diatom assemblages and plant macrofossils. For example, at about 2.3 m and 3.1 m below the ground surface, while aerophilic diatoms (such as Diadesmis contenta and Diploneis elliptica) dominate the underlying peaty layer, freshwater and brackish planktonic taxa (Aulacoseira and Thalassiosira) abound in the overlying layer. As many as five such changes in diatom assemblages were found in a 8-m core and radiocarbon ages constrain the age of the entire sequence to 3500 yr BP.

Speedy Acquisition of Surface-Contamination Samples

NASA Technical Reports Server (NTRS)

Puleo, J. R.; Kirschner, L. E.

1982-01-01

Biological contamination of large-area surfaces can be determined quickly, inexpensively, and accurately with the aid of a polyester bonded cloth. Cloth is highly effective in removing microbes from a surface and releasing them for biological assay. In releasing contaminants, polyester bonded cloth was found to be superior to other commercial cleanroom cloths, including spun-bound polyamid cloths and cellulose cloths.

Interpretation of clothing heritage for contemporary tourism

NASA Astrophysics Data System (ADS)

Vilman Proje, J.; Bizjak, M.

2017-10-01

In tourism is the first impression of essential meaning as tourists falling by what they see. In designing the clothing image, for commercial use in tourist sector, should be considered that clothes are consistent with the clothing habits of the region and that comply with the heritage story and style of the geographical area. Clothing image of the tourism representatives of the Bohinj region (Slovenia) has been developed. When designing, the inspiration was sought in historical and contemporary clothing image and heritage stories, in elements that representatives of the community recognize as their own cultural heritage. Affiliated clothes for tourism employees should have a useful function of comfortable workwear with heritage expression, meaning clothes are to be accepted as “everyday” clothes and not as a costume.

Advocating for Normal Birth With Normal Clothes

PubMed Central

Waller-Wise, Renece

2007-01-01

Childbirth educators need to be aware that the clothes they wear when teaching classes send a nonverbal message to class participants. Regardless of who wears the clothing or what is worn, clothes send a message; thus, both the advantages and disadvantages related to clothing choice should be considered. Ultimately, the message should reflect the values of supporting normal birth. For childbirth educators who are allowed to choose their own apparel to wear in their classes, street clothes may be the benchmark for which to strive. This article discusses the many nonverbal messages that clothes convey and provides support for the choice of street clothes as the dress for the professional childbirth educator; thus, “normal clothes to promote normal birth.” PMID:18408807

The efficacy of cleaning products on food industry surfaces.

PubMed

Lalla, Fairuz; Dingle, Peter

2004-09-01

The increased incidence of foodborne illness and the growing use of chemical sanitizers in the food industry led the authors to an investigation of alternative, chemical-free methods of sanitizing surfaces using fiber cloths with hot water. The sanitizing performance of kitchen fiber cloths and all-purpose fiber cloths sanitized with hot water at 167 degrees F (75 degrees C) was compared with that of generic cloths such as antibacterial cloths and cleaning cloths sanitized with hot water at 167 degrees F (75 degrees C) or chemical sanitizers--quaternary ammonium compound (QAC) and hypochlorite. The QAC sanitizer resulted in the lowest overall concentrations of Staphylococcus aureus and Escherichia coli. The sanitizing performance of the kitchen fiber cloths was similar to that of the antibacterial cloths (S. aureus: p = .144; E. coli: p = .120) and cleaning cloths (S. aureus: p = .297; E. coli: p = .062) sanitized with QAC. Use of the fiber cloths resulted in lower concentrations of bacteria on stainless-steel kitchen surfaces, compared with the use of the generic cloths sanitized with hot water at 167 degrees F (75 degrees C). Concentrations of bacteria on the surfaces after use of the all-purpose fiber cloths were similar to concentrations of bacteria after use of the generic cloths sanitized with hypochlorite.

Origin of Clothing Lice Indicates Early Clothing Use by Anatomically Modern Humans in Africa

PubMed Central

Toups, Melissa A.; Kitchen, Andrew; Light, Jessica E.; Reed, David L.

2011-01-01

Clothing use is an important modern behavior that contributed to the successful expansion of humans into higher latitudes and cold climates. Previous research suggests that clothing use originated anywhere between 40,000 and 3 Ma, though there is little direct archaeological, fossil, or genetic evidence to support more specific estimates. Since clothing lice evolved from head louse ancestors once humans adopted clothing, dating the emergence of clothing lice may provide more specific estimates of the origin of clothing use. Here, we use a Bayesian coalescent modeling approach to estimate that clothing lice diverged from head louse ancestors at least by 83,000 and possibly as early as 170,000 years ago. Our analysis suggests that the use of clothing likely originated with anatomically modern humans in Africa and reinforces a broad trend of modern human developments in Africa during the Middle to Late Pleistocene. PMID:20823373

Facile Synthesis of Free-Standing NiO/MnO2 Core-Shell Nanoflakes on Carbon Cloth for Flexible Supercapacitors.

PubMed

Xi, Shuang; Zhu, Yinlong; Yang, Yutu; Jiang, Shulan; Tang, Zirong

2017-12-01

Free-standing NiO/MnO 2 core-shell nanoflake structure was deposited on flexible carbon cloth (CC) used as electrode for high-performance supercapacitor (SC). The NiO core was grown directly on CC by hydrothermal process and the following annealing treatment. MnO 2 thin film was then covered on NiO structures via a self-limiting process in aqueous solution of 0.5 M KMnO 4 and 0.5 M Na 2 SO 4 with a carbon layer serving as the sacrificial layer. Both the core and shell materials are good pseudocapacitive materials, the compounds of binary metal oxides can provide the synergistic effect of all individual constituents, and thus enhance the performance of SC electrode. The obtained CC/NiO/MnO 2 heterostructure was directly used as SC electrodes, showing an enhanced electrochemical performance including areal capacitance of 316.37 mF/cm 2 and special gravimetric capacitance of 204.3 F/g at the scan rate of 50 mV/s. The electrode also shows excellent cycling stability, which retains 89% of its initial discharge capacitance after 2200 cycles with >97% Coulombic efficiency. The synthesized binder-free hierarchical composite electrode with superior electrochemical properties demonstrates enormous potential in the application of flexible SCs.

[Hospital hygiene - clothing in hospitals: protection for staff and patients].

PubMed

Kerwat, Klaus; Wulf, Hinnerk

2008-03-01

Hospital clothing worn by medical personnel in German hospitals can be divided into two groups, work clothing and protective clothing. Work clothing is not changed between patient visits and hence is no measure of infection control. Its function is to protect private clothing and to identify medical personnel. Protective clothing on the other hand should protect staff and patients from nosocomial infections. It has to be changed between patient visits and is especially recommended with invasive procedures and immunocompromised patients.

Changes in zooplankton habitat, behavior, and acoustic scattering characteristics across glider-resolved fronts in the Southern California Current System

NASA Astrophysics Data System (ADS)

Powell, Jesse R.; Ohman, Mark D.

2015-05-01

We report cross-frontal changes in the characteristics of plankton proxy variables measured by autonomous Spray ocean gliders operating within the Southern California Current System (SCCS). A comparison of conditions across the 154 positive frontal gradients (i.e., where density of the surface layer decreased in the offshore direction) identified from six years of continuous measurements showed that waters on the denser side of the fronts typically showed higher Chl-a fluorescence, shallower euphotic zones, and higher acoustic backscatter than waters on the less dense side. Transitions between these regions were relatively abrupt. For positive fronts the amplitude of Diel Vertical Migration (DVM), inferred from a 3-beam 750 kHz acoustic Doppler profiler, increased offshore of fronts and covaried with optical transparency of the water column. Average interbeam variability in acoustic backscatter also changed across many positive fronts within 3 depth strata (0-150 m, 150-400 m, and 400-500 m), revealing a front-related change in the acoustic scattering characteristics of the assemblages. The extent of vertical stratification of distinct scattering assemblages was also more pronounced offshore of positive fronts. Depth-stratified zooplankton samples collected by Mocness nets corroborated the autonomous measurements, showing copepod-dominated assemblages and decreased zooplankton body sizes offshore and euphausiid-dominated assemblages with larger median body sizes inshore of major frontal features.

Submillimetre wave imaging and security: imaging performance and prediction

NASA Astrophysics Data System (ADS)

Appleby, R.; Ferguson, S.

2016-10-01

Within the European Commission Seventh Framework Programme (FP7), CONSORTIS (Concealed Object Stand-Off Real-Time Imaging for Security) has designed and is fabricating a stand-off system operating at sub-millimetre wave frequencies for the detection of objects concealed on people. This system scans people as they walk by the sensor. This paper presents the top level system design which brings together both passive and active sensors to provide good performance. The passive system operates in two bands between 100 and 600GHz and is based on a cryogen free cooled focal plane array sensor whilst the active system is a solid-state 340GHz radar. A modified version of OpenFX was used for modelling the passive system. This model was recently modified to include realistic location-specific skin temperature and to accept animated characters wearing up to three layers of clothing that move dynamically, such as those typically found in cinematography. Targets under clothing have been modelled and the performance simulated. The strengths and weaknesses of this modelling approach are discussed.

Development of orthotropic birefringent materials for photoelastic stress analysis

NASA Technical Reports Server (NTRS)

Daniel, I. M.; Niiro, T.; Koller, G. M.

1981-01-01

Materials were selected and fabrication procedures developed for orthotropic birefringent materials. An epoxy resin (Maraset 658/558 system) was selected as the matrix material. Fibers obtained from style 3733 glass cloth and type 1062 glass roving were used as reinforcement. Two different fabrication procedures were used. In the first one, layers of unidirectional fibers removed from the glass cloth were stacked, impregnated with resin, bagged and cured in the autoclave at an elevated temperature. In the second procedure, the glass roving was drywound over metal frames, impregnated with resin and cured at room temperature under pressure and vacuum in an autoclave. Unidirectional, angle-ply and quasi-isotropic laminates of two thicknesses and with embedded flaws were fabricated. The matrix and the unidirectional glass/epoxy material were fully characterized. The density, fiber volume ratio, mechanical, and optical properties were determined. The fiber volume ratio was over 0.50. Birefringent properties were in good agreement with predictions based on a stress proportioning concept and also, with one exception, with properties predicted by a finite element analysis.

Forensic Features of Clothing-Related Deaths: Historical and Cultural Aspects.

PubMed

Byard, Roger W

2017-12-01

Clothing may both cause death and contribute to ongoing lethal mechanisms by a variety of quite disparate mechanisms. The manner of death may be accidental, suicidal, or homicidal. Accidental deaths include burning from clothing catching on fire, strangulation from clothing tangling in vehicle wheels or exposed machinery, and drowning. Entanglement of clothing in machinery may also result in significant injuries, which are not uncommon in farming communities. Excessive clothing, or its absence, may significantly alter body temperature, and hanging from clothing is a feature in the young or in mentally or physically handicapped adults, or in adults who are intoxicated with alcohol or drugs. In previous years, potentially lethal amounts of arsenic were present in clothing and accessories from dyes. Clothing may also be used to form nooses or to pad ropes in suicides and may be used in cases of strangulation, suffocation, or choking in homicides. The contribution of clothing to mortality has changed over the years with changes in fashions and in manufacturing techniques. Geographical differences in clothing-related deaths persist because of variable social and cultural practices and legislative frameworks.

The Influence of the Environment and Clothing on Human Exposure to Ultraviolet Light

PubMed Central

Liu, Jin; Zhang, Wei

2015-01-01

Objection The aim of this study is to determine the effect of clothing and the environment on human exposure to ultraviolet light. Methods The ultraviolet (ultraviolet A and ultraviolet B) light intensity was measured, and air quality parameters were recorded in 2014 in Beijing, China. Three types of clothing (white polyester cloth, pure cotton white T-shirt, and pure cotton black T-shirt) were individually placed on a mannequin. The ultraviolet (ultraviolet A and ultraviolet B) light intensities were measured above and beneath each article of clothing, and the percentage of ultraviolet light transmission through the clothing was calculated. Results (1) The ultraviolet light transmission was significantly higher through white cloth than through black cloth; the transmission was significantly higher through polyester cloth than through cotton. (2) The weather significantly influenced ultraviolet light transmission through white polyester cloth; transmission was highest on clear days and lowest on overcast days (ultraviolet A: P=0.000; ultraviolet B: P=0.008). (3) Air quality parameters (air quality index and particulate matter 2.5 and 10) were inversely related to the ultraviolet light intensity that reached the earth’s surface. Ultraviolet B transmission through white polyester cloth was greater under conditions of low air pollution compared with high air pollution. Conclusion Clothing color and material and different types of weather affected ultraviolet light transmission; for one particular cloth, the transmission decreased with increasing air pollution. PMID:25923778

The influence of the environment and clothing on human exposure to ultraviolet light.

PubMed

Liu, Jin; Zhang, Wei

2015-01-01

The aim of this study is to determine the effect of clothing and the environment on human exposure to ultraviolet light. The ultraviolet (ultraviolet A and ultraviolet B) light intensity was measured, and air quality parameters were recorded in 2014 in Beijing, China. Three types of clothing (white polyester cloth, pure cotton white T-shirt, and pure cotton black T-shirt) were individually placed on a mannequin. The ultraviolet (ultraviolet A and ultraviolet B) light intensities were measured above and beneath each article of clothing, and the percentage of ultraviolet light transmission through the clothing was calculated. (1) The ultraviolet light transmission was significantly higher through white cloth than through black cloth; the transmission was significantly higher through polyester cloth than through cotton. (2) The weather significantly influenced ultraviolet light transmission through white polyester cloth; transmission was highest on clear days and lowest on overcast days (ultraviolet A: P=0.000; ultraviolet B: P=0.008). (3) Air quality parameters (air quality index and particulate matter 2.5 and 10) were inversely related to the ultraviolet light intensity that reached the earth's surface. Ultraviolet B transmission through white polyester cloth was greater under conditions of low air pollution compared with high air pollution. Clothing color and material and different types of weather affected ultraviolet light transmission; for one particular cloth, the transmission decreased with increasing air pollution.

Laundry Study for a Lunar Outpost

NASA Technical Reports Server (NTRS)

Ewert, Michael; Jeng, Frank

2009-01-01

In support of the Constellation Program, which will return humans to the moon and establish an Outpost, NASA has conducted an analysis of crew clothing and laundry options. Single-use or "disposable" clothing has been used from Apollo until International Space Station (ISS) missions, meaning that clothes were worn for the whole mission or thrown away when they became too dirty to wear any longer. This is justified for short duration missions; however, as the Constellation mission will last much longer and each individual Outpost mission is expected to last up to 180 days, mission goals and launch penalties for mass and volume may lead to a different conclusion. Furthermore, the habitat atmosphere pressure and therefore oxygen volume percentage will be different from ISS or Shuttle. Almost daily EVA sorties will be a norm during Outpost exploration missions. All of these factors will have impacts on selection of crew clothing and laundry options for Outpost missions. Mass and volume estimates for disposable crew clothing have been shown as a major penalty in long-duration manned space exploration missions in previous analyses. Assuming disposable clothing like ISS, Equivalent System Mass (ESM) of crew clothing and hygiene towels was estimated to be 11,000 kg or about 11% of total life support system ESM for a 10-year Lunar Outpost mission with 4 crew members. Ways to reduce this clothing penalty, which are discussed in this paper, include: a) Reduce clothing supply rate through using clothes made of advanced fabrics; b) Reduce daily usage rate by extending its use duration before disposing; and c) Use laundry and reusable clothing. The report summarizes recent research efforts in advanced clothing, proposed clothing supply rates for Exploration missions, results of a trade-off study between disposable clothing and laundry, and conclusions and suggestions for Constellation Program clothing.

30 CFR 77.1710 - Protective clothing; requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Protective clothing; requirements. 77.1710... COAL MINES Miscellaneous § 77.1710 Protective clothing; requirements. Each employee working in a... protective clothing and devices as indicated below: (a) Protective clothing or equipment and face-shields or...

Insertion Loss of Personal Protective Clothing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shull D.J.; Biesel, V.B.; Cunefare, K.A.

1999-05-13

'The use of personal protective clothing that covers the head is a common practice in many industries. Such personal protective clothing will impact the sound pressure level and the frequency content of sounds to which the wearer will be exposed. The use of such clothing, then, may impact speech and alarm audibility. A measure of the impact of such clothing is its insertion loss. Insertion loss measurements were performed on four types of personal protective clothing in use by Westinghouse Savannah River Company personnel which utilize cloth and plastic hood configurations to protect the head. All clothing configurations tested atmore » least partially cover the ears. The measurements revealed that insertion loss of the items tested was notable at frequencies above 1000 Hz only and was a function of material stiffness and acoustic flanking paths to the ear. Further, an estimate of the clothing''s noise reduction rating reveals poor performance in that regard, even though the insertion loss of the test articles was significant at frequencies at and above 1000 Hz.'« less

Numerical simulation and experiment on multilayer stagger-split die.

PubMed

Liu, Zhiwei; Li, Mingzhe; Han, Qigang; Yang, Yunfei; Wang, Bolong; Sui, Zhou

2013-05-01

A novel ultra-high pressure device, multilayer stagger-split die, has been constructed based on the principle of "dividing dies before cracking." Multilayer stagger-split die includes an encircling ring and multilayer assemblages, and the mating surfaces of the multilayer assemblages are mutually staggered between adjacent layers. In this paper, we investigated the stressing features of this structure through finite element techniques, and the results were compared with those of the belt type die and single split die. The contrast experiments were also carried out to test the bearing pressure performance of multilayer stagger-split die. It is concluded that the stress distributions are reasonable and the materials are utilized effectively for multilayer stagger-split die. And experiments indicate that the multilayer stagger-split die can bear the greatest pressure.

Rotational spectral variations of asteroid (8) Flora Implications for the nature of the S-type asteroids and for the parent bodies of the ordinary chondrites

NASA Technical Reports Server (NTRS)

Gaffey, M. J.

1984-01-01

The surface material and the surface material heterogeneities of the asteroid Flora are characterized using the best available data sets and the most sophisticated interpretive calibrations. Five spectrally derived mineralogic and patrologic properties of the surface assemblage of Flora which are relevant to whether this body is a differentiated or undifferentiated object are considered: bulk mineralogy, mafic mineral assemblage, metallic phase, pyroxene composition and structural type, and mineralogic variation. All of these properties indicate that Flora is a differentiated body. Flora is probably the residual core of an intensely heated, thermally evolved, and magnetically differentiated planetesimal which was subsequently disrupted. The present surface sample layers formed at or near the core-mantle boundary in the parent body.

'Where were your clothes?' Eliciting descriptions of clothing placement from children alleging sexual abuse in criminal trials and forensic interviews.

PubMed

Stolzenberg, Stacia N; Lyon, Thomas D

2017-09-01

The present study examined how children alleging sexual abuse are asked about clothing placement during abusive episodes, both in criminal trials and forensic interviews. The placement of clothing is of great importance, because it facilitates distinguishing abusive touch from non-abusive touch, as well as the severity of abuse when the touching is in fact sexual. If clothing has not been removed, then sexual abuse appears less likely and certain types of sexual contact are physically impossible (or at least highly improbable). We examined how trial attorneys ( n = 142) and forensic interviewers in investigative interviews ( n = 155) questioned 5- 12-year-olds about the location of clothing during alleged sexual abuse. To do so, we identified all question-answer pairs that included references to clothing placement, and coded for the clothing item mentioned, whether the interviewer elicited information about clothing placement or the child spontaneously provided such information, question-type, and response-type. Discussions about clothing placement were commonplace in both settings, particularly in court. Fewer than one in five question-answer pairs about clothing placement were spontaneous mentions by children; the questioner elicited most discussions. When interviewers asked wh- questions rather than yes/no and forced-choice questions, children provided more elaboration, more detailed clothing information, and were over six times more likely to describe clothing placement in a fashion that could not be captured by a single preposition (e.g., neither on nor off). The findings suggest that descriptions of clothing placement are subject to serious misinterpretation when closed-ended questions are asked.

Microbial community diversity of the eastern Atlantic Ocean reveals geographic differences

NASA Astrophysics Data System (ADS)

Friedline, C. J.; Franklin, R. B.; McCallister, S. L.; Rivera, M. C.

2012-01-01

Prokaryotic communities are recognized as major drivers of the biogeochemical processes in the oceans. However, the genetic diversity and composition of those communities is poorly understood. The aim of this study was to investigate the eubacterial communities in three different water layers: surface (2-20 m), deep chlorophyll maximum (DCM; 28-90 m), and deep (100-4600 m) at nine stations along the eastern Atlantic Ocean from 42.8° N to 23.7° S. In order to describe the dynamics of the eubacterial assemblages in relation to depth, associated environmental properties, and Longhurstian ecological provinces community DNA was extracted from 16 samples, from which the V6 region of 16s rDNA was PCR-amplified with eubacteria-specific primers, and the PCR amplicons were pyrosequenced. A total of 352 029 sequences were generated; after quality filtering and processing, 257 260 sequences were clustered into 2871 normalized Operational Taxonomic Units (OTU) using a definition of 97% sequence identity. Comparisons of the phylogenetic affiliation of those 2871 OTUs show more than 54% of them were assigned to the Proteobacteria, with the Alphaproteobacteria representing 4% of the total Proteobacteria OTUs, and the Gammaproteobacteria representing 22%. Within the Alphaproteobacteria-affiliated OTUs, 44% of the OTUs were associated with the ubiquitous SAR11 clade. The phylum Cyanobacteria represent 10% of the reads, with the majority of those reads among the GpIIa family including Prochlorococcus and Synechococcus. Among the Gammaproteobacteria, a single OTU affiliated to Alteromonas comprises ~3% of the abundance. The phyla Bacteroidetes, Verrucomicrobia, Actinobacteria, and Firmicutes represent approximately 7%, 0.8%, 2%, and 0.05% of the read abundance, respectively. Community ecology statistical analyses and a novel implementation of Bayesian inference suggests that eastern Atlantic Ocean eubacterial assemblages are vertically stratified and associated with water layers characterized by unique environmental signals (e.g., temperature, salinity, and nutrients). Genetic composition of eubacterial communities from the same water layer are more similar to each other than to the communities from different water layers. Moreover, within the same water layer the separation of the communities appears to show a significant distance effect. Surface eubacterial communities displayed a general congruency with the ecological provinces defined by Longhurst with exceptions usually associated with unique hydrographic and biogeochemical features. Collectively, our findings suggest that a vertical and latitudinal biogeographical signature is present in the studied communities and that both environmental parameters and ecological provinces are drivers of eubacterial assemblages in the eastern Atlantic Ocean.

20 CFR 670.640 - Are students provided with clothing?

Code of Federal Regulations, 2010 CFR

2010-04-01

... clothing? Yes, Job Corps students are provided cash clothing allowances and/or articles of clothing, including safety clothing, when needed for their participation in Job Corps and their successful entry into... Section 670.640 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR THE JOB...

28 CFR 571.22 - Release clothing and transportation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Release clothing and transportation. 571... AND RELEASE RELEASE FROM CUSTODY Release Gratuities, Transportation, and Clothing § 571.22 Release clothing and transportation. (a) Staff shall provide release clothing appropriate for the time of year and...

28 CFR 571.22 - Release clothing and transportation.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Release clothing and transportation. 571... AND RELEASE RELEASE FROM CUSTODY Release Gratuities, Transportation, and Clothing § 571.22 Release clothing and transportation. (a) Staff shall provide release clothing appropriate for the time of year and...

28 CFR 571.22 - Release clothing and transportation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Release clothing and transportation. 571... AND RELEASE RELEASE FROM CUSTODY Release Gratuities, Transportation, and Clothing § 571.22 Release clothing and transportation. (a) Staff shall provide release clothing appropriate for the time of year and...

28 CFR 571.22 - Release clothing and transportation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Release clothing and transportation. 571... AND RELEASE RELEASE FROM CUSTODY Release Gratuities, Transportation, and Clothing § 571.22 Release clothing and transportation. (a) Staff shall provide release clothing appropriate for the time of year and...

28 CFR 571.22 - Release clothing and transportation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Release clothing and transportation. 571... AND RELEASE RELEASE FROM CUSTODY Release Gratuities, Transportation, and Clothing § 571.22 Release clothing and transportation. (a) Staff shall provide release clothing appropriate for the time of year and...

Space Station WP-2 application of LDEF MLI results

NASA Technical Reports Server (NTRS)

Smith, Charles A.; Hasegawa, Mark M.; Jones, Cherie A.

1993-01-01

The Cascaded Variable Conductance Heat Pipe Experiment, which was developed by Michael Grote of McDonnell Douglas Electronic Systems Company, was located in Tray F-9 of the Long Duration Exposure Facility (LDEF), where it received atomic oxygen almost normal to its surface. The majority of the tray was covered by aluminized Kapton polyimide multilayer insulation (MLI), which showed substantial changes from atomic oxygen erosion. Most of the outermost Kapton layer of the MLI and the polyester scrim cloth under it were lost, and there was evidence of contaminant deposition which discolored the edges of the MLI blanket. Micrometeoroid and orbital debris (MM/OD) hits caused small rips in the MLI layers, and in some cases left cloudy areas where the vapor plume caused by a hit condensed on the next layer. The MLI was bent gradually through 90 deg at the edges to enclose the experiment, and the Kapton that survived along the curved portion showed the effects of atomic oxygen erosion at oblique angles. In spite of space environment effects over the period of the LDEF mission, the MLI blanket remained functional. The results of the analysis of LDEF MLI were used in developing the standard MLI blanket for Space Station Work Package-2 (WP-2). This blanket is expected to last 30 years when exposed to the low Earth orbit (LEO) environment constituents of atomic oxygen and MM/OD, which are the most damaging to MLI materials. The WP-2 standard blanket consists of an outer cover made from Beta-cloth glass fiber fabric which is aluminized on the interior surface, and an inner cover of 0.076-mm (0.003-in) double-side-aluminized perforated Kapton. The inner reflector layers are 0.0076-mm (0.0003-in) double-side aluminized, perforated Kapton separated by layers of Dacron polyester fabric. The outer cover was selected to be resistant to the LEO environment and durable enough to survive in orbit for 30 years. This paper describes the analyses of the LDEF MLI results, and how these results contributed to the selection of the WP-2 MLI blanket materials and configuration.

HP3 on ExoMars - Cutting airbag cloths with the sharp tip of a mechanical mole

NASA Astrophysics Data System (ADS)

Krause, C.; Izzo, M.; Re, E.; Mehls, C.; Richter, L.; Coste, P.

2009-04-01

The HP3 - Heat Flow and Physical Properties Package - is planned to be one of the Humboldt lander-based instruments on the ESA ExoMars mission. HP3 will allow the measurement of the subsurface temperature gradient and physical as well as thermophysical properties of the subsurface regolith of Mars down to a depth of 5 meters. From these measurements, the planetary heat flux can be inferred. The HP³ instrument package consists of a mole trailing a package of thermal and electrical sensors into the regolith. Beside the payload elements Thermal Excitation and Measurement Suite and a Permittivity Probe the HP3 experiment includes sensors to detect the forward motion and the tilt of the HP3 payload compartment. The HP3 experiment will be integrated into the lander platform of the ExoMars mission. The original accommodation featured a deployment device or a robotic arm to place HP3 onto the soil outside the deflated lander airbags. To avoid adding such deployment devices, it was suggested that the HP3 mole should be capable of piercing the airbags under the lander. The ExoMars lander airbag is made of 4 Kevlar layers (2 abrasive and 2 bladders). A double fold of the airbag (a worst case) would represent a pile of 12 layers. An exploratory study has examined the possibility of piercing airbag cloths by adding sharp cutting blades on the tip of a penetrating mole. In the experimental setup representative layers were laid over a Mars soil simulant. Initial tests used a hammer-driven cutting tip and had moderate to poor results. More representative tests used a prototype of the HP3 mole and were fully successful: the default 4 layer configuration was pierced as well as the 12 layer configuration, the latter one within 3 hours and about 3000 mole strokes This improved behaviour is attributed to the use of representative test hardware where guidance and suppression of mole recoil were concerned. The presentation will provide an explanation of the technical requirements on airbag cutting with a mole and the mentioned experimental setup and results.

Development and short-term dynamics of macrofouling assemblages on fish-cage nettings in a tropical estuary

NASA Astrophysics Data System (ADS)

Madin, John; Chong, V. C.; Basri, Badrulnizam

2009-06-01

A study was conducted at a fish culture farm in the Jaha River estuary, Malaysia, to examine the structure and development of macrofouling assemblages on floating net-cages. The study was conducted during the dry (August-October 2001) and wet (December-February 2002) seasons. Biofouling on 1.6 cm mesh net panels (size 0.2 m × 2 m) suspended inside (P, T) and outside (O) experimental net-cages was monitored every week until net openings were completely occluded by macrofouling organisms (8 wk and 12 wk for dry and wet seasons respectively). Seven species (6 phyla) of sessile organisms and 23 species (3 phyla) of non-sessile associates were recorded. Macro-colonization of net panels began with the hydroid Plumularia sp. irrespective of season and treatment (P, T, and O), while other species only appeared after 1 or 2 weeks of immersion. Inside net-cages where water flow was slow (mean < 6 cm s -1 at 0.50-0.75 m depth); macroalgae ( Polysiphonia sp.), anthozoans (unidentified anemone), barnacles ( Balanus amphitrite), amphipods ( Gammaropsis sp. & Photis sp.), and tanaids ( Leptognathia sp.) were dominant on the net panels during the dry season. In the wet season, hydroid ( Plumularia sp.), mussel ( Xenostrobus mangle), and nematode abundance were however significant. With stronger water flow (mean ≈ 20 cm s -1) as occurring outside the net-cages, macrofouling assemblages for both seasons comprised mainly Plumularia sp. and Gammaropsis sp. The macrofouling assemblage showed a clear succession of species that occupied different layers of the net panels. The study shows that while organic enrichment and retarded water flow together enhance the development of macrofouling assemblages, salinity, depth, substrate (net) area and species competition specifically influence community structure, colonization, and depth distribution of the macrofouling organisms.

Vertical distribution, diversity and assemblages of mesopelagic fishes in the western Mediterranean

NASA Astrophysics Data System (ADS)

Olivar, M. P.; Bernal, A.; Molí, B.; Peña, M.; Balbín, R.; Castellón, A.; Miquel, J.; Massutí, E.

2012-04-01

The mesopelagic fish community of the western Mediterranean was studied during two cruises carried out in December 2009 and July 2010 in the shelf and slope zones around the Balearic Islands. Much of what was previously known about this deep water group of fishes in the Mediterranean Sea came from studies performed using planktonic and small midwater nets. This study was the first attempt to use large pelagic trawls and small nets combined with information about the main sound scattering layers to analyse mesopelagic fish composition, diversity and species assemblages. This community is characterised by a relatively low diversity compared to other oceanic regions of the world, with Myctophiformes and Stomiiformes being the main contributors. Bathymetry and the level of the water column were the most important factors structuring the investigated fish assemblages, and similar vertical patterns were observed for the different species collected during the two study periods. A shelf assemblage composed of a few species of myctophids, with Notoscopelus elongatus being the main contributor, was distinguished. The slope assemblage included both Myctophiformes and Stomiiformes that showed differences in their day-night main location along the water column. In terms of species behaviour, two important groups were detected. The first was non-migrant or weakly migrant species, with the paradigmatic example being the gonostomatid Cyclothone braueri, which occurred at a depth of 400-600 m; this species is partly responsible for the permanent acoustic (38 kHz) response at this depth. The second group, near-surface migrants at night, was represented by most of the juvenile and adult myctophids, exemplified by Ceratoscopelus maderensis, with the exception of just a few of the largest size classes of some species, such as Lampanyctus crocodilus and N. elongatus that remain near the bottom.

Viral infections stimulate the metabolism and shape prokaryotic assemblages in submarine mud volcanoes.

PubMed

Corinaldesi, Cinzia; Dell'Anno, Antonio; Danovaro, Roberto

2012-06-01

Mud volcanoes are geological structures in the oceans that have key roles in the functioning of the global ecosystem. Information on the dynamics of benthic viruses and their interactions with prokaryotes in mud volcano ecosystems is still completely lacking. We investigated the impact of viral infection on the mortality and assemblage structure of benthic prokaryotes of five mud volcanoes in the Mediterranean Sea. Mud volcano sediments promote high rates of viral production (1.65-7.89 × 10(9) viruses g(-1) d(-1)), viral-induced prokaryotic mortality (VIPM) (33% cells killed per day) and heterotrophic prokaryotic production (3.0-8.3 μgC g(-1) d(-1)) when compared with sediments outside the mud volcano area. The viral shunt (that is, the microbial biomass converted into dissolved organic matter as a result of viral infection, and thus diverted away from higher trophic levels) provides 49 mgC m(-2) d(-1), thus fuelling the metabolism of uninfected prokaryotes and contributing to the total C budget. Bacteria are the dominant components of prokaryotic assemblages in surface sediments of mud volcanoes, whereas archaea dominate the subsurface sediment layers. Multivariate multiple regression analyses show that prokaryotic assemblage composition is not only dependant on the geochemical features and processes of mud volcano ecosystems but also on synergistic interactions between bottom-up (that is, trophic resources) and top-down (that is, VIPM) controlling factors. Overall, these findings highlight the significant role of the viral shunt in sustaining the metabolism of prokaryotes and shaping their assemblage structure in mud volcano sediments, and they provide new clues for our understanding of the functioning of cold-seep ecosystems.

Viral infections stimulate the metabolism and shape prokaryotic assemblages in submarine mud volcanoes

PubMed Central

Corinaldesi, Cinzia; Dell'Anno, Antonio; Danovaro, Roberto

2012-01-01

Mud volcanoes are geological structures in the oceans that have key roles in the functioning of the global ecosystem. Information on the dynamics of benthic viruses and their interactions with prokaryotes in mud volcano ecosystems is still completely lacking. We investigated the impact of viral infection on the mortality and assemblage structure of benthic prokaryotes of five mud volcanoes in the Mediterranean Sea. Mud volcano sediments promote high rates of viral production (1.65–7.89 × 109 viruses g−1 d−1), viral-induced prokaryotic mortality (VIPM) (33% cells killed per day) and heterotrophic prokaryotic production (3.0–8.3 μgC g−1 d−1) when compared with sediments outside the mud volcano area. The viral shunt (that is, the microbial biomass converted into dissolved organic matter as a result of viral infection, and thus diverted away from higher trophic levels) provides 49 mgC m−2 d−1, thus fuelling the metabolism of uninfected prokaryotes and contributing to the total C budget. Bacteria are the dominant components of prokaryotic assemblages in surface sediments of mud volcanoes, whereas archaea dominate the subsurface sediment layers. Multivariate multiple regression analyses show that prokaryotic assemblage composition is not only dependant on the geochemical features and processes of mud volcano ecosystems but also on synergistic interactions between bottom-up (that is, trophic resources) and top-down (that is, VIPM) controlling factors. Overall, these findings highlight the significant role of the viral shunt in sustaining the metabolism of prokaryotes and shaping their assemblage structure in mud volcano sediments, and they provide new clues for our understanding of the functioning of cold-seep ecosystems. PMID:22170423

Clothing and Textiles (Intermediate). Instructor's Guide. Revised.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This clothing and textiles teacher's manual contains five instructional units for a semester course. Units included are (1) Significance of Textiles and Clothing to the Individual in Society; (2) Nature of Textiles and Clothing; (3) Acquisition, Use, and Care of Textiles and Clothing; (4) Garment Construction; and (5) Occupations in…

19 CFR 10.58 - Bolting cloths; marking.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Bolting cloths; marking. 10.58 Section 10.58... TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Bolting Cloths § 10.58 Bolting cloths; marking. (a) As a prerequisite to the free entry of bolting cloth for milling...

19 CFR 10.58 - Bolting cloths; marking.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Bolting cloths; marking. 10.58 Section 10.58... TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Bolting Cloths § 10.58 Bolting cloths; marking. (a) As a prerequisite to the free entry of bolting cloth for milling...

19 CFR 10.58 - Bolting cloths; marking.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Bolting cloths; marking. 10.58 Section 10.58... TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Bolting Cloths § 10.58 Bolting cloths; marking. (a) As a prerequisite to the free entry of bolting cloth for milling...

19 CFR 10.58 - Bolting cloths; marking.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Bolting cloths; marking. 10.58 Section 10.58... TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Bolting Cloths § 10.58 Bolting cloths; marking. (a) As a prerequisite to the free entry of bolting cloth for milling...

19 CFR 10.58 - Bolting cloths; marking.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Bolting cloths; marking. 10.58 Section 10.58... TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Bolting Cloths § 10.58 Bolting cloths; marking. (a) As a prerequisite to the free entry of bolting cloth for milling...

An Investigation of Self-Concept, Clothing Selection, and Life Satisfaction among Disabled Consumers

ERIC Educational Resources Information Center

Chang, Hyo Jung

2012-01-01

This dissertation investigates the relationships between various aspects of self-concept (i.e., generalized self-efficacy, public self-consciousness, state hope, and self-esteem), clothing selection (i.e., clothing that expresses individuality, clothing that improves the emotional state, clothing that camouflages the body), and life satisfaction…

Energy consumption and usage characteristics from field measurements of residential dishwashers, clothes washers and clothes dryers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, Y.L.; Grot, R.A.

1980-10-01

The measured energy consumption and usage characteristics for household dishwashers, clothes washers, and clothes dryers for ten townhouses at Twin Rivers, N.J., are presented. Whenever the dishwashers and/or clothes washers were in use, the energy consumption, water consumption, frequency of usage, and water temperature were measured by a data acquisition system. The electrical energy of electric clothes dryers and the gas consumption of gas clothes dryers were measured, as well as their frequency and duration of use, and exhaust temperature. Typical household usage patterns of these major appliances are included.

Weathering of almandine garnet: influence of secondary minerals on the rate-determining step, and implications for regolith-scale Al mobilization

Treesearch

Jason R. Price; Debra S. Bryan-Ricketts; Diane Anderson; Michael A. Velbel

2013-01-01

Secondary surface layers form by replacement of almandine garnet during chemical weathering. This study tested the hypothesis that the kinetic role of almandine's weathering products, and the consequent relationships of primary-mineral surface texture and specific assemblages of secondary minerals, both vary with the solid-solution-controlled variations in Fe and...

Study and modification of the reactivity of carbon fibers

NASA Technical Reports Server (NTRS)

Walker, P. L., Jr.; Ismail, I. M.; Mahajan, O. P.; Eapen, T. A.

1980-01-01

The reactivity to air of polyactylonitrile-based carbon fiber cloth was enhanced by the addition of metals to the cloth. The cloth was oxidized in 54 wt% nitric acid in order to increase the surface area of the cloth and to add carbonyl groups to the surface. Metal addition was then achieved by soaking the cloth in metal acetate solution to effect exchange between the metal carbon and hydrogen on the carbonyl groups. The addition of potassium, sodium, calcium and barium enhanced fiber cloth reactivity to air at 573 K. Extended studies using potassium addition showed that success in enhancing fiber cloth reactivity to air depends on: extent of cloth oxidation in nitric acid, time of exchange in potassium acetate solution and the thoroughness of removing metal acetate from the fiber pore structure following exchange. Cloth reactivity increases essentially linearly with increase in potassium addition via exchange.

Survival of influenza A virus on contaminated student clothing

PubMed Central

IKEDA, KEIKO; TSUJIMOTO, KAZUKO; SUZUKI, YUKIKO; KOYAMA, AUGUSTINE HAJIME

2015-01-01

The role of contaminated clothing in the transmission of influenza A virus during an epidemic period was investigated by examining the recovery of infectious influenza virus from experimentally virus-contaminated clothing, which had been subejected to routine wearing and washing for several months or years. The amount of infectious virus recovered from the nine types of clothing decreased with time and was shown to differ widely between clothing samples, when the contaminated clothing samples were maintained in uncovered glass Petri dishes in a safety cabinet under air blowing. These results indicate a dependence of virus transmissibility on the nature of the contaminated clothes. The difference in recovery was shown to have no significant correlation with the thickness or the materials of the clothing; however, a correlation was observed with the residual amount of water in the deposited virus preparation on the test clothing. PMID:25780410

Silicon carbide sewing thread

NASA Technical Reports Server (NTRS)

Sawko, Paul M. (Inventor)

1995-01-01

Composite flexible multilayer insulation systems (MLI) were evaluated for thermal performance and compared with currently used fibrous silica (baseline) insulation system. The systems described are multilayer insulations consisting of alternating layers of metal foil and scrim ceramic cloth or vacuum metallized polymeric films quilted together using ceramic thread. A silicon carbide thread for use in the quilting and the method of making it are also described. These systems provide lightweight thermal insulation for a variety of uses, particularly on the surface of aerospace vehicles subject to very high temperatures during flight.

Awareness of the Social Implications of Clothing in Relation to Fashion Awareness and Clothing Economic Practices.

ERIC Educational Resources Information Center

Horridge, Patricia; Richards, Mary Lynne

1986-01-01

The Sproles Consumer Interests and Priorities questionnaire was administered to 3,036 home economists. Awareness of social implications of clothing, correlated positively with fashion awareness and clothing economic practices. Results suggest that persons exhibiting substantial awareness of social importance of clothing also tend to evidence…

Breather cloth for vacuum curing

NASA Technical Reports Server (NTRS)

Reed, M. W.

1979-01-01

Finely-woven nylon cloth that has been treated with Teflon improves vacuum adhesive bonding of coatings to substrates. Cloth is placed over coating; entire assembly, including substrate, coating, and cloth, is placed in plastic vacuum bag for curing. Cloth allows coating to "breathe" when bag is evacuated. Applications include bonding film coatings to solar concentrators and collectors.

The application and development of artificial intelligence in smart clothing

NASA Astrophysics Data System (ADS)

Wei, Xiong

2018-03-01

This paper mainly introduces the application of artificial intelligence in intelligent clothing. Starting from the development trend of artificial intelligence, analysis the prospects for development in smart clothing with artificial intelligence. Summarize the design key of artificial intelligence in smart clothing. Analysis the feasibility of artificial intelligence in smart clothing.

Evaluation on an ergonomic design of functional clothing for wheelchair users.

PubMed

Wang, Yunyi; Wu, Daiwei; Zhao, Mengmeng; Li, Jun

2014-05-01

Researchers have pointed out that people with physical disabilities find it difficult to obtain suitable clothing. In this study a set of wheelchair user oriented functional clothing was designed. Attention was paid to the wheelchair users' daily living activities related with clothing. An evaluating system combined with sports tournament and rehabilitation medicine was introduced to assess the new designed clothing. Six wheelchair users (3 males and 3 females) were invited to wear the clothing. A set of normal functional clothing was employed as a comparison (Control). The time required to complete three different daily living activities, i.e. dressing and undressing, going to toilet and bathing were recorded. Results showed that with the new clothing wheelchair users' competence of managing toilet was increased by 52.9%. The time needed for toilet was reduced by 45.7%. Their capability of managing dressing and undressing was improved by 24.6%. The study indicated that the newly designed clothing could facilitate wheelchair users' daily living activities related with clothing. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Badenian planktonic foraminifera as climate proxies at the southern margin of the Central Paratethys (Ugljevik, Bosnia and Herzegovina)

NASA Astrophysics Data System (ADS)

Theobalt, D.; Mandic, O.

2012-04-01

Badenian transgression is well exposed in the open coal pit Bogutovo Selo near Ugljevik in NE Bosnia and Herzegovina, located at the southern margin of the Pannonian Basin. Middle Miocene marine sediments superpose Late Oligocene lignite bearing lacustrine deposits. The studied succession is about 62 m thick and includes the uppermost part of the lake deposits, comprising clays, sands and coal seams, followed by marine sediments. These consist mainly of gray marls, which show some intercalations of thin, dark clay layers, volcanic ash layers and fossiliferous beds as well as carbonate bodies of different thicknesses. The presence of Orbulina suturalis allows a biostratigraphic correlation of the marine transgression horizon with the upper part of the Lower Badenian. 28 planktonic foraminiferal assemblages were investigated using quantitative analysis to evaluate the climate development during the initial marine flooding by the Paratethys Sea. Further on the samples were statistically treated to find out if there are significant differences in assemblages from the marine sediments deposited before and after the initial Serravallian cooling event coinciding with the onset of the Middle Badenian (Wielician) Salinity Crisis. 17 planktonic foraminiferal species were grouped by their palaeoclimatic significance into cool (Globigerina bulloides, G. praebulloides, G. diplostoma, G. concinna, G. tarchanensis, G. falconensis, Turborotalita quinqueloba), temperate (Globorotalia bykovae, G. transsylvanica, G. peripheroronda, Globoturborotalita woodi), warm-temperate (Globigerinella regularis, Tenuitellinata angustiumbilicata) and warm indicators (Globigerinoides trilobus, G. quadrilobatus, Orbulina suturalis, Globoquadrina cf. altispira). The counts were performed mainly on generic level. Upper Lower Badenian (Upper Lagenidae Zone) is represented in the marly succession in the lower part of the section, where the foraminiferal assemblages indicate warmer conditions with high percentages of warm water indicators. A distinct cooling is shown in the uppermost passage of the lower part, which is followed by a 13 m thick carbonate platform of Wielician age. This transition corresponds to the gradual shift from Greenhouse into Icehouse climate after the late Middle Miocene Climatic Optimum. The superposing marly deposits of the late Wielician age (Earliest Serravallian) contain planktonic foraminiferal assemblages that indicate cooler conditions. The general percentage of cool water indicators is much higher than in the lower Badenian sediments.

Heavy Minerals in Palaeotsunami Deposits: Assemblages, Spatial Distribution and Microtextural Imprints

NASA Astrophysics Data System (ADS)

Costa, P. J.; Andrade, C.; Cascalho, J.; Dawson, A. G.; Freitas, M. C.; Dawson, S.; Mahaney, W. C.

2013-12-01

The sedimentological record provides a database useful to characterize and evaluate recurrence of tsunamis, which contributes to assessing the vulnerability of any coastal area to this natural hazard. Thus, the enhancement of our ability to recognize signatures specific of tsunami activity imprinted in coastal sediments is of unquestionable interest. The aim of this study is to discuss and further contribute to the improvement of the characterization of (palaeo)tsunami deposits, and of their source materials. With that purpose the vertical and horizontal distribution of heavy mineral (HM) assemblages in sand-sized tsunamigenic deposits from six locations exhibiting a varied suite of coastal contexts and corresponding to three inundation events -(8200yrs BP - Scotland, 1500yrs BP - Scotland, AD 1755 - Portugal) were studied. In general, results from paleotsunami sediments show that site-specific effects prevent 'blind' extrapolations; instead, the bulk of the HM assemblages reflect local specificities related with the regional geology. In the Portuguese sediments (Martinhal, Boca do Rio and Salgados) ca. 90% of the non-opaque HM population consists of tourmaline, andalusite and staurolite, whereas amphiboles are dominant (> 90% of the assemblage) in the Scottish sediments (Scasta Voe, Basta Voe and Whale Firth). Principal Components Analyses revealed that the first 2 components explain more than 2/3 of the total variance found in each site. Horizontal and vertical variations in the HM were observed and especially in the heavier mineral species. Although, in some of the studied cases, the deposit was macroscopically massive, data on HM allowed the distinction of backwash layer(s), related with incorporation of inland materials. In what concerns sources, results indicate that palaeotsunami sediments share fewer compositional similarities with present-day inshore and offshore materials and more resemblances with dune and beach sediment, thus indicating these as the more likely source areas. In addition, preliminary results of SEM analysis of microtextural features imprinted in the surface of heavy minerals indicate an increase in the number of mechanical marks in the surface of palaeotsunami grains when compared with potential source materials (beach, dune, inshore and offshore samples). This work further reveals the potential to use heavy minerals as a complementary sedimentological tool in the study of palaeotsunami deposits.

Energy-efficiency program for clothes washers, clothes dryers, and dishwashers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-11-01

The objectives of this study of dishwashers, clothes washers, and clothes dryers are: to evaluate existing energy efficiency test procedures and recommend the use of specific test procedures for each appliance group and to establish the maximum economically and technologically feasible energy-efficiency improvement goals for each appliance group. Specifically, the program requirements were to determine the energy efficiency of the 1972 models, to evaluate the feasibility improvements that could be implemented by 1980 to maximize energy efficiency, and to calculate the percentage efficiency improvement based on the 1972 baseline and the recommended 1980 targets. The test program was conducted usingmore » 5 dishwashers, 4 top-loading clothes washers, one front-loading clothes washer, 4 electric clothes dryers, and 4 gas clothes dryers. (MCW)« less

Clothing choices, weight, and trait self-objectification.

PubMed

Tiggemann, Marika; Andrew, Rachel

2012-06-01

The present study aimed to assess the link between clothing choice and aspects of body image. Participants were 112 female undergraduate students who completed a questionnaire containing a measure of clothing functions, as well as BMI, self-classified weight, and trait self-objectification. Results indicated that BMI and self-classified weight were positively correlated with the choice of clothes for camouflage. Self-objectification was positively correlated with choice of clothes for fashion, and negatively correlated with choosing clothes for comfort. It was concluded that clothing represents an important but neglected aspect of contemporary women's management of their body's appearance. Copyright © 2012 Elsevier Ltd. All rights reserved.

Fish Distribution and Habitat Complexity on Banks of the Strait of Sicily (Central Mediterranean Sea) from Remotely-Operated Vehicle (ROV) Explorations

PubMed Central

Esposito, Valentina; Battaglia, Pietro; Altobelli, Chiara; Perzia, Patrizia; Romeo, Teresa; Canese, Simonepietro; Andaloro, Franco

2016-01-01

The Strait of Sicily was recognized internationally as an “Ecologically or Biologically Significant Area” by the Contracting Parties of the Convention on Biological Diversity in 2014. However, basic aspects of its fish diversity are still unknown and most of the information comes from traditional trawl surveys. This paper provides the first detailed description, using a Remotely Operated Vehicle (ROV), of the composition and depth distribution of the demersal fish assemblages found on banks of the Strait of Sicily and the related habitat complexity from 35 to 240 m depth. A total of 24 families and 52 fish species were recorded and depth was consistently associated with a significant proportion of the variation of the fish assemblage. The highest species richness was observed at the shallowest depth layer (0–50 m) and significantly decreased, remaining almost constant, in deeper layers. Similarly the highest abundance was recorded at 0–50 m, where C. julis represented the most abundant species, and decreased progressively throughout the whole depth gradient. Although the factor habitat complexity explained only a small proportion of the fish assemblage variation, significant differences among different degrees of habitat complexity were observed, together with a general positive trend for species richness and abundance with increasing habitat complexity. The ROV also allowed us to observe some rare or poorly known fish species such as Scorpaenodes arenai, Hyporthodus haifensis, Myliobatis aquila, Gadella maraldi, Epinephelus caninus and Lappanella fasciata. These findings show that banks serve as reservoirs for fish abundance and biodiversity and that immediate environmental conservation and management actions represent a priority not only for Italy but also for other countries which share the same area. PMID:27936221

Formation mechanism of the protective layer in a blast furnace hearth

NASA Astrophysics Data System (ADS)

Jiao, Ke-xin; Zhang, Jian-liang; Liu, Zheng-jian; Xu, Meng; Liu, Feng

2015-10-01

A variety of techniques, such as chemical analysis, scanning electron microscopy-energy dispersive spectroscopy, and X-ray diffraction, were applied to characterize the adhesion protective layer formed below the blast furnace taphole level when a certain amount of titanium- bearing burden was used. Samples of the protective layer were extracted to identify the chemical composition, phase assemblage, and distribution. Furthermore, the formation mechanism of the protective layer was determined after clarifying the source of each component. Finally, a technical strategy was proposed for achieving a stable protective layer in the hearth. The results show that the protective layer mainly exists in a bilayer form in the sidewall, namely, a titanium-bearing layer and a graphite layer. Both the layers contain the slag phase whose major crystalline phase is magnesium melilite (Ca2MgSi2O7) and the main source of the slag phase is coke ash. It is clearly determined that solid particles such as graphite, Ti(C,N) and MgAl2O4 play an important role in the formation of the protective layer, and the key factor for promoting the formation of a stable protective layer is reasonable control of the evolution behavior of coke.

Subduction factory in an ampoule: Experiments on sediment-peridotite interaction under temperature gradient conditions

NASA Astrophysics Data System (ADS)

Woodland, A. B.; Bulatov, V. K.; Brey, G. P.; Girnis, A. V.; Höfer, H. E.; Gerdes, A.

2018-02-01

To better understand processes above subducted oceanic slabs, we have undertaken experiments with juxtaposed sediment and peridotite layers at pressures of 7.5 and 10.5 GPa at a controlled temperature gradient from ∼100 to ∼500 °C per a sample length of ∼3 mm. The sediment starting material contains H2O (6.9 wt%) and CO2 (5.9 wt%) and has a major-element composition similar to GLOSS (Plank and Langmuir, 1998) doped with trace elements at 10-100 ppm levels. Several experiments were conducted with ∼0.5 wt% Cl or F. The peridotite layer is composed of natural olivine (66 wt%), orthopyroxene (27 wt%) and garnet (7 wt%) mixed with ∼15 wt% graphite. Several experimental configurations were investigated, but the "basic" setup has the sediment layer at the bottom in the cold zone (400-1200 °C) overlain by peridotite at 900-1500 °C. The temperature distribution was determined by two thermocouples and orthopyroxene-garnet thermometry. Features common to many experiments are (1) the development of multiple layers of various lithologies and a pool of hydrous silicate or carbonate-silicate melt in the hottest part of the capsule; (2) replacement of olivine by orthopyroxene in the metaperidotite; (3) preservation and growth of garnet and local development of magnesite in the metaperidotite layer; (4) enrichment in garnet within the metasediment layer at the contact with the metaperidotite; (5) formation of a clinopyroxene-garnet assemblage at the bottom (the coldest part); (6) presence of K-bearing phases (phlogopite or phengite) and carbonates in the metasediment layer only at temperatures <700 °C; and (7) occurrence of accessory zircon, rutile and phosphates in the coldest regions. In terms of element redistribution, the peridotite becomes strongly enriched in SiO2 compared to the starting composition, and the sediment gains MgO, FeO and Cr2O3. Potassium is fully extracted into the melt, while Na and Ca are largely retained in the coldest part of the metasediment layer in clinopyroxene, Ca-rich garnet and aragonite. The melt is a product of interaction between partial melt or fluid from the sediment and peridotite. It has a silico-carbonatite composition with variable SiO2, MgO, FeO and CaO contents and low Al2O3. The addition of Cl has almost no effect on element distribution, whereas the addition of F results in the appearance of humite-group minerals containing significant amounts of Ti. Trace-element distribution is controlled by pressure, temperature and mineral assemblages. At low temperatures in the sediment layer (<700 °C) Ba, Rb, Sr and Li are much more mobile than REE and HFSE, which results in high Ba/La, Ba/Nb, Sr/Nb etc. (fluid metasomatism). At higher temperatures in the sediment layer, the melt is markedly enriched in Ba, Rb, Sr, LREE and U relative to Ti, MREE and HREE. Negative Nb-Ta and Zr-Hf anomalies in melts are caused by the retention of rutile, zircon and humite-group minerals in the solid residue. Thermodiffusion may affect the ratios of some highly incompatible elements (e.g., Ta/La). Possible applications of the results to natural deep subduction are discussed in view of variations in mineral assemblages and trace element ratios.

24 CFR 3280.708 - Exhaust duct system and provisions for the future installation of a clothes dryer.

Code of Federal Regulations, 2010 CFR

2010-04-01

...(a)(1) through (5). (c) Provisions for future installation of electric clothes dryers. When wiring is... for the future installation of a clothes dryer. 3280.708 Section 3280.708 Housing and Urban... duct system and provisions for the future installation of a clothes dryer. (a) Clothes dryers. (1) All...

Advanced Clothing System

NASA Technical Reports Server (NTRS)

Broyan, James; Orndoff, Evelyne

2014-01-01

The goal of the Advanced Clothing System (ACS) is to use advanced commercial off-the-shelf fibers and antimicrobial treatments with the goal of directly reducing the mass and volume of a logistics item. The current clothing state-of-the-art on the International Space Station (ISS) is disposable, mostly cotton-based, clothing with no laundry provisions. Each clothing article has varying use periods and will become trash. The goal is to increase the length of wear of the clothing to reduce the logistical mass and volume. The initial focus has been exercise clothing since the use period is lower. Various ground studies and an ISS technology demonstration have been conducted to evaluate clothing preference and length of wear. The analysis indicates that use of ACS selected garments (e.g. wool, modacrylic, polyester) can increase the breakeven point for laundry to 300 days.

Advanced Clothing System

NASA Technical Reports Server (NTRS)

Schlesinger, Thilini; Broyan, James; Orndoff, Evelyne

2014-01-01

The goal of the Advanced Clothing System (ACS) is to use advanced commercial off-theshelf fibers and antimicrobial treatments with the goal of directly reducing the mass and volume of a logistics item. The current clothing state-of-the-art on the International Space Station (ISS) is disposable, mostly cotton-based, clothing with no laundry provisions. Each clothing article has varying use periods and will become trash. The goal is to increase the length of wear of the clothing to reduce the logistical mass and volume. The initial focus has been exercise clothing since the use period is lower. Various ground studies and an ISS technology demonstration have been conducted to evaluate clothing preference and length of wear. The analysis indicates that use of ACS selected garments (e.g. wool, modacrylic, polyester) can increase the breakeven point for laundry to 300 days.

Habitat Parameters for Oxygen Minimum Zone Copepods from the Eastern Tropical North Pacific

NASA Astrophysics Data System (ADS)

Wishner, K. F.; Outram, D.; Grassian, B.

2016-02-01

Oxygen minimum zones (OMZs) affect zooplankton distributions and may be expanding in worldwide spatial and vertical extent from climate change. We studied zooplankton (especially copepod) distributions in the Eastern Tropical North Pacific (ETNP) OMZ, using day-night vertically-stratified MOCNESS tows (0-1000m). Habitat parameters (temperature, oxygen, depth) were defined for abundant copepod species and groups. Zooplankton layers, with a unique suite of species, occurred at upper and lower OMZ oxyclines. At the mesopelagic lower oxycline, there was a layer with a characteristic species assemblage and a sharp 10X biomass increase compared to nearby depths. The lower oxycline layer occurred within a narrow very low oxygen concentration (2µM). At two stations with different OMZ vertical extents, the lower oxycline layer depth changed with OMZ thickness, remaining at the same oxygen concentration but different temperature. Life history habitat (diapause depth, temperature) of the copepod Eucalanus inermis was also affected. In the upper water column at the two stations, large diel vertical migrators (fish, euphausiids) descended to taxon-specific daytime depths in the mid OMZ, regardless of oxygen level, but copepod species distributions showed more variability and sensitivity to habitat parameters. We predict that, with moderate OMZ expansion, the lower oxycline community will likely shift depth, thus re-distributing midwater biomass, species, and processes. In the upper water column, large vertical migrator distributions may be less affected, while smaller taxa (copepods) will likely be sensitive to habitat changes. At some point, the ability to withstand these changes may be exceeded for particular taxa, with consequences for assemblages, trophic webs, and export. In keeping with the session theme, we hope to compare our oceanic findings with others' results from coastal hypoxic situations.

Coccolithophore assemblage response to Black Sea Water inflow into the North Aegean Sea (NE Mediterranean)

NASA Astrophysics Data System (ADS)

Karatsolis, B.-Th.; Triantaphyllou, M. V.; Dimiza, M. D.; Malinverno, E.; Lagaria, A.; Mara, P.; Archontikis, O.; Psarra, S.

2017-10-01

This study aims to presents the species composition of living coccolithophore communities in the NE Aegean Sea, investigating their spatial and temporal variations along a north-south transect in the area receiving the inflowing surface Black Sea Water (BSW) over the deeper Levantine Water (LW) layer. Coccolithophores in the area were relatively diverse and a total of 95 species over 3 sampling periods studied were recognized using Scanning Electron Microscope (SEM) techniques. R-mode hierarchical cluster analysis distinguished two coccolithophore Groups (I, IIa, IIb, IIc) with different ecological preferences. Emiliania huxleyi was the most abundant species of Group I, whereas Syracosphaera spp., Rhabdosphaera spp. and holococcolithophores were prevailing in the highly diversified Group II assemblages. Biometric analysis conducted on E. huxleyi coccoliths from Aegean water column and Black Sea sediment trap samples, indicated that during autumn, NE Aegean specimens in samples under BSW influence were featured by unimodal distribution concerning the coccolith relative tube width, with values similar to those provided by the Black Sea specimens. In early spring, coccoliths in the stations with increased BSW influx displayed a bimodal pattern of relative tube width with smaller values found mostly in the surface layers, while the distribution became again unimodal and dominated by larger values within the deeper LW layers. In the summer period, the typical LW holococcolithophore species (Group II) presented low cell numbers in the surface layer (<20 m), which is their usual ecological niche in the Aegean Sea, compared to greater depths, therefore marking LW mass flowing beneath the less saline BSW surface lid. In contrast to Black Sea early summer bloom conditions, E. huxleyi was almost absent in the NE Aegean during the summer sampling period.

24 CFR 3280.708 - Exhaust duct system and provisions for the future installation of a clothes dryer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... for the future installation of a clothes dryer. 3280.708 Section 3280.708 Housing and Urban... duct system and provisions for the future installation of a clothes dryer. (a) Clothes dryers. (1) All gas and electric clothes dryers shall be exhausted to the outside by a moisture-lint exhaust duct and...

24 CFR 3280.708 - Exhaust duct system and provisions for the future installation of a clothes dryer.

Code of Federal Regulations, 2012 CFR

2012-04-01

... for the future installation of a clothes dryer. 3280.708 Section 3280.708 Housing and Urban... duct system and provisions for the future installation of a clothes dryer. (a) Clothes dryers. (1) All gas and electric clothes dryers shall be exhausted to the outside by a moisture-lint exhaust duct and...

24 CFR 3280.708 - Exhaust duct system and provisions for the future installation of a clothes dryer.

Code of Federal Regulations, 2014 CFR

2014-04-01

... for the future installation of a clothes dryer. 3280.708 Section 3280.708 Housing and Urban... duct system and provisions for the future installation of a clothes dryer. (a) Clothes dryers. (1) All gas and electric clothes dryers shall be exhausted to the outside by a moisture-lint exhaust duct and...

24 CFR 3280.708 - Exhaust duct system and provisions for the future installation of a clothes dryer.

Code of Federal Regulations, 2013 CFR

2013-04-01

... for the future installation of a clothes dryer. 3280.708 Section 3280.708 Housing and Urban... duct system and provisions for the future installation of a clothes dryer. (a) Clothes dryers. (1) All gas and electric clothes dryers shall be exhausted to the outside by a moisture-lint exhaust duct and...

40 CFR 170.130 - Pesticide safety training for workers.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., shampoo hair, and put on clean clothes after work. (v) Washing work clothes separately from other clothes... or sprayed on the body. As soon as possible, shower, shampoo, and change into clean clothes. (3...

40 CFR 170.130 - Pesticide safety training for workers.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., shampoo hair, and put on clean clothes after work. (v) Washing work clothes separately from other clothes... or sprayed on the body. As soon as possible, shower, shampoo, and change into clean clothes. (3...

Herbaceous Forage and Selection Patterns by Ungulates across Varying Herbivore Assemblages in a South African Savanna

PubMed Central

Treydte, Anna Christina; Baumgartner, Sabine; Heitkönig, Ignas M. A.; Grant, Catharina C.; Getz, Wayne M.

2013-01-01

Herbivores generally have strong structural and compositional effects on vegetation, which in turn determines the plant forage species available. We investigated how selected large mammalian herbivore assemblages use and alter herbaceous vegetation structure and composition in a southern African savanna in and adjacent to the Kruger National Park, South Africa. We compared mixed and mono-specific herbivore assemblages of varying density and investigated similarities in vegetation patterns under wildlife and livestock herbivory. Grass species composition differed significantly, standing biomass and grass height were almost twice as high at sites of low density compared to high density mixed wildlife species. Selection of various grass species by herbivores was positively correlated with greenness, nutrient content and palatability. Nutrient-rich Urochloa mosambicensis Hack. and Panicum maximum Jacq. grasses were preferred forage species, which significantly differed in abundance across sites of varying grazing pressure. Green grasses growing beneath trees were grazed more frequently than dry grasses growing in the open. Our results indicate that grazing herbivores appear to base their grass species preferences on nutrient content cues and that a characteristic grass species abundance and herb layer structure can be matched with mammalian herbivory types. PMID:24358228

Multi-electrode double layer capacitor having single electrolyte seal and aluminum-impregnated carbon cloth electrodes

DOEpatents

Farahmandi, C. J.; Dispennette, J. M.; Blank, E.; Kolb, A. C.

1999-05-25

A single cell, multi-electrode high performance double layer capacitor includes first and second flat stacks of electrodes adapted to be housed in a closeable two-part capacitor case which includes only a single electrolyte seal. Each electrode stack has a plurality of electrodes connected in parallel, with the electrodes of one stack being interleaved with the electrodes of the other stack to form an interleaved stack, and with the electrodes of each stack being electrically connected to respective capacitor terminals. A porous separator sleeve is inserted over the electrodes of one stack before interleaving to prevent electrical shorts between the electrodes. The electrodes are made by folding a compressible, low resistance, aluminum-impregnated carbon cloth, made from activated carbon fibers, around a current collector foil, with a tab of the foils of each electrode of each stack being connected in parallel and connected to the respective capacitor terminal. The height of the interleaved stack is somewhat greater than the inside height of the closed capacitor case, thereby requiring compression of the interleaved electrode stack when placed inside of the case, and thereby maintaining the interleaved electrode stack under modest constant pressure. The closed capacitor case is filled with an electrolytic solution and sealed. A preferred electrolytic solution is made by dissolving an appropriate salt into acetonitrile (CH[sub 3]CN). In one embodiment, the two parts of the capacitor case are conductive and function as the capacitor terminals. 32 figs.

Method of making a multi-electrode double layer capacitor having single electrolyte seal and aluminum-impregnated carbon cloth electrodes

DOEpatents

Farahmandi, C. Joseph; Dispennette, John M.; Blank, Edward; Kolb, Alan C.

2002-09-17

A single cell, multi-electrode high performance double layer capacitor includes first and second flat stacks of electrodes adapted to be housed in a closeable two-part capacitor case which includes only a single electrolyte seal. Each electrode stack has a plurality of electrodes connected in parallel, with the electrodes of one stack being interleaved with the electrodes of the other stack to form an interleaved stack, and with the electrodes of each stack being electrically connected to respective capacitor terminals. A porous separator is positioned against the electrodes of one stack before interleaving to prevent electrical shorts between the electrodes. The electrodes are made by folding a compressible, low resistance, aluminum-impregnated carbon cloth, made from activated carbon fibers, around a current collector foil, with a tab of the foils of each electrode of each stack being connected in parallel and connected to the respective capacitor terminal. The height of the interleaved stack is somewhat greater than the inside height of the closed capacitor case, thereby requiring compression of the interleaved electrode stack when placed inside of the case, and thereby maintaining the interleaved electrode stack under modest constant pressure. The closed capacitor case is filled with an electrolytic solution and sealed. A preferred electrolytic solution is made by dissolving an appropriate salt into acetonitrile (CH.sub.3 CN). In one embodiment, the two parts of the capacitor case are conductive and function as the capacitor terminals.

Multi-electrode double layer capacitor having single electrolyte seal and aluminum-impregnated carbon cloth electrodes

DOEpatents

Farahmandi, C Joseph [San Diego, CA; Dispennette, John M [Oceanside, CA; Blank, Edward [San Diego, CA; Kolb, Alan C [Rancho Santa Fe, CA

1999-05-25

A single cell, multi-electrode high performance double layer capacitor includes first and second flat stacks of electrodes adapted to be housed in a closeable two-part capacitor case which includes only a single electrolyte seal. Each electrode stack has a plurality of electrodes connected in parallel, with the electrodes of one stack being interleaved with the electrodes of the other stack to form an interleaved stack, and with the electrodes of each stack being electrically connected to respective capacitor terminals. A porous separator sleeve is inserted over the electrodes of one stack before interleaving to prevent electrical shorts between the electrodes. The electrodes are made by folding a compressible, low resistance, aluminum-impregnated carbon cloth, made from activated carbon fibers, around a current collector foil, with a tab of the foils of each electrode of each stack being connected in parallel and connected to the respective capacitor terminal. The height of the interleaved stack is somewhat greater than the inside height of the closed capacitor case, thereby requiring compression of the interleaved electrode stack when placed inside of the case, and thereby maintaining the interleaved electrode stack under modest constant pressure. The closed capacitor case is filled with an electrolytic solution and sealed. A preferred electrolytic solution is made by dissolving an appropriate salt into acetonitrile (CH.sub.3 CN). In one embodiment, the two parts of the capacitor case are conductive and function as the capacitor terminals.

Multi-electrode double layer capacitor having single electrolyte seal and aluminum-impregnated carbon cloth electrodes

DOEpatents

Farahmandi, C. Joseph; Dispennette, John M.; Blank, Edward; Kolb, Alan C.

1999-01-19

A single cell, multi-electrode high performance double layer capacitor includes first and second flat stacks of electrodes adapted to be housed in a closeable two-part capacitor case which includes only a single electrolyte seal. Each electrode stack has a plurality of electrodes connected in parallel, with the electrodes of one stack being interleaved with the electrodes of the other stack to form an interleaved stack, and with the electrodes of each stack being electrically connected to respective capacitor terminals. A porous separator sleeve is inserted over the electrodes of one stack before interleaving to prevent electrical shorts between the electrodes. The electrodes are made by folding a compressible, low resistance, aluminum-impregnated carbon cloth, made from activated carbon fibers, around a current collector foil, with a tab of the foils of each electrode of each stack being connected in parallel and connected to the respective capacitor terminal. The height of the interleaved stack is somewhat greater than the inside height of the closed capacitor case, thereby requiring compression of the interleaved electrode stack when placed inside of the case, and thereby maintaining the interleaved electrode stack under modest constant pressure. The closed capacitor case is filled with an electrolytic solution and sealed. A preferred electrolytic solution is made by dissolving an appropriate salt into acetonitrile (CH.sub.3 CN). In one embodiment, the two parts of the capacitor case are conductive and function as the capacitor terminals.

NiFe-Layered Double Hydroxide Nanosheet Arrays Supported on Carbon Cloth for Highly Sensitive Detection of Nitrite.

PubMed

Ma, Yue; Wang, Yongchuang; Xie, Donghua; Gu, Yue; Zhang, Haimin; Wang, Guozhong; Zhang, Yunxia; Zhao, Huijun; Wong, Po Keung

2018-02-21

Excessive uptake of nitrite has been proven to be detrimental to the ecological system and human health. Hence, there is a rising requirement for constructing effective electrochemical sensors to precisely monitor the level of nitrite. In this work, NiFe-layered double hydroxide nanosheet arrays (NiFe-LDH NSAs) have been successfully fabricated on a carbon cloth (CC) substrate via a facile one-pot hydrothermal route. By integrating the collective merits of macroporous CC and NiFe-LDH NSAs such as superior electrical conductivity, striking synergistic effect between the dual active components, enlarged electrochemically active surface area, unique three-dimensional hierarchical porous network characteristics, and fast charge transport and ion diffusion, the proposed NiFe-LDH NSAs/CC architecture can be served as a self-supporting sensor toward nitrite detection. As a consequence, the resulting NiFe-LDH NSAs/CC electrode demonstrates superior nitrite sensing characteristics, accompanied by broad linear range (5-1000 μM), quick response rate (ca. 3 s), ultralow detection limit (0.02 μM), and high sensitivity (803.6 μA·mM -1 ·cm -2 ). Meanwhile, the electrochemical sensor possesses timeless stability, good reproducibility, and strong anti-interference feature. Importantly, the resulting sensor can determine nitrite level in tap and lake water with high recoveries, suggesting its feasibility for practical applications. These findings show that the obtained NiFe-LDH NSAs/CC electrode holds great prospect in highly sensitive and specific detection of nitrite.

Multi-electrode double layer capacitor having single electrolyte seal and aluminum-impregnated carbon cloth electrodes

DOEpatents

Farahmandi, C.J.; Dispennette, J.M.; Blank, E.; Kolb, A.C.

1999-01-19

A single cell, multi-electrode high performance double layer capacitor includes first and second flat stacks of electrodes adapted to be housed in a closeable two-part capacitor case which includes only a single electrolyte seal. Each electrode stack has a plurality of electrodes connected in parallel, with the electrodes of one stack being interleaved with the electrodes of the other stack to form an interleaved stack, and with the electrodes of each stack being electrically connected to respective capacitor terminals. A porous separator sleeve is inserted over the electrodes of one stack before interleaving to prevent electrical shorts between the electrodes. The electrodes are made by folding a compressible, low resistance, aluminum-impregnated carbon cloth, made from activated carbon fibers, around a current collector foil, with a tab of the foils of each electrode of each stack being connected in parallel and connected to the respective capacitor terminal. The height of the interleaved stack is somewhat greater than the inside height of the closed capacitor case, thereby requiring compression of the interleaved electrode stack when placed inside of the case, and thereby maintaining the interleaved electrode stack under modest constant pressure. The closed capacitor case is filled with an electrolytic solution and sealed. A preferred electrolytic solution is made by dissolving an appropriate salt into acetonitrile (CH{sub 3}CN). In one embodiment, the two parts of the capacitor case are conductive and function as the capacitor terminals. 32 figs.

Method of making a multi-electrode double layer capacitor having single electrolyte seal and aluminum-impregnated carbon cloth electrodes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farahmandi, C. Joseph; Dispennette, John M.; Blank, Edward

A method of making a double layer capacitior includes first and second flat stacks of electrodes adapted to be housed in a closeable two-part capacitor case which includes only a single electrolyte seal. Each electrode stack has a plurality of electrodes connected in parallel, with the electrodes of one stack being interleaved with the electrodes of the other stack to form an interleaved stack, and with the electrodes of each stack being electrically connected to respective capacitor terminals. A porous separator is positioned against the electrodes of one stack before interleaving to prevent electrical shorts between the electrodes. The electrodesmore » are made by folding a compressible, low resistance, aluminum-impregnated carbon cloth, made from activated carbon fibers, around a current collector foil, with a tab of the foils of each electrode of each stack being connected in parallel and connected to the respective capacitor terminal. The height of the interleaved stack is somewhat greater than the inside height of the closed capacitor case, thereby requiring compression of the interleaved electrode stack when placed inside of the case, and thereby maintaining the interleaved electrode stack under modest constant pressure. The closed capacitor case is filled with an electrolytic solution and sealed. A preferred electrolytic solution is made by dissolving an appropriate salt into acetonitrile (CH.sub.3 CN). In one embodiment, the two arts of the capacitor case are conductive and function as the capacitor terminals.« less

A cluster randomised trial of cloth masks compared with medical masks in healthcare workers

PubMed Central

MacIntyre, C Raina; Seale, Holly; Dung, Tham Chi; Hien, Nguyen Tran; Nga, Phan Thi; Chughtai, Abrar Ahmad; Rahman, Bayzidur; Dwyer, Dominic E; Wang, Quanyi

2015-01-01

Objective The aim of this study was to compare the efficacy of cloth masks to medical masks in hospital healthcare workers (HCWs). The null hypothesis is that there is no difference between medical masks and cloth masks. Setting 14 secondary-level/tertiary-level hospitals in Hanoi, Vietnam. Participants 1607 hospital HCWs aged ≥18 years working full-time in selected high-risk wards. Intervention Hospital wards were randomised to: medical masks, cloth masks or a control group (usual practice, which included mask wearing). Participants used the mask on every shift for 4 consecutive weeks. Main outcome measure Clinical respiratory illness (CRI), influenza-like illness (ILI) and laboratory-confirmed respiratory virus infection. Results The rates of all infection outcomes were highest in the cloth mask arm, with the rate of ILI statistically significantly higher in the cloth mask arm (relative risk (RR)=13.00, 95% CI 1.69 to 100.07) compared with the medical mask arm. Cloth masks also had significantly higher rates of ILI compared with the control arm. An analysis by mask use showed ILI (RR=6.64, 95% CI 1.45 to 28.65) and laboratory-confirmed virus (RR=1.72, 95% CI 1.01 to 2.94) were significantly higher in the cloth masks group compared with the medical masks group. Penetration of cloth masks by particles was almost 97% and medical masks 44%. Conclusions This study is the first RCT of cloth masks, and the results caution against the use of cloth masks. This is an important finding to inform occupational health and safety. Moisture retention, reuse of cloth masks and poor filtration may result in increased risk of infection. Further research is needed to inform the widespread use of cloth masks globally. However, as a precautionary measure, cloth masks should not be recommended for HCWs, particularly in high-risk situations, and guidelines need to be updated. Trial registration number Australian New Zealand Clinical Trials Registry: ACTRN12610000887077. PMID:25903751

Uncovering Sundanese Values by Analyzing Symbolic Meaning of Ménak Priangan Clothing (1800-1942)

NASA Astrophysics Data System (ADS)

Karmila, M.; Suciati; Widiaty, I.

2016-04-01

This study investigates symbolic meanings found in the Sunda ethnic clothing, particularly the Menak Priangan clothing. This study aims to uncover and document those symbolic meanings found in the Menak Priangan clothing as an effort to develop Sunda cultural artefacts of West Java. This study on Menak Priangan clothing applies ethnography (visual) and aesthetic methods. The visual method is utilized in order to uncover local cultural (Sunda) values found in Menak Priangan clothing visualization, including: design, model, name, and representing colours, which then directed towards local Sundanese aesthetic concepts living within the Priangan community. Furthermore, aesthetic method is used to explore role of aesthetic values in empowering visual cultural values within certain community, particularly Sunda aesthetic values. The study results show that since the 19th century, Sunda ethnic clothing was limited to Priangan Sunda only, while traditional clothing wearing by Priangan people reflects their social strata, consisting of: a. Menak Gede (Menak pangluhurna: mayor), bearing raden title, b. Menak Leutik/Santana (mayor assistant), titles: asep, mas, agus, ujang, (Nyimas for woman), c. Somah/Cacah: ordinary people/lower class. Clothing is a cultural phenomenon within certain culture reflecting such society experiences. For Menak people, clothing and its accessories have important meanings. They wear such traditional clothing and accessories as a symbol of power they have within bureaucratic structure and as a symbol of social status they bear within traditional community structure.

Role of clothing in both accelerating and impeding dermal absorption of airborne SVOCs.

PubMed

Morrison, Glenn C; Weschler, Charles J; Bekö, Gabriel; Koch, Holger M; Salthammer, Tunga; Schripp, Tobias; Toftum, Jørn; Clausen, Geo

2016-01-01

To assess the influence of clothing on dermal uptake of semi-volatile organic compounds (SVOCs), we measured uptake of selected airborne phthalates for an individual wearing clean clothes or air-exposed clothes and compared these results with dermal uptake for bare-skinned individuals under otherwise identical experimental conditions. Using a breathing hood to isolate dermal from inhalation uptake, we measured urinary metabolites of diethylphthalate (DEP) and di-n-butylphthalate (DnBP) from an individual exposed to known concentrations of these compounds for 6 h in an experimental chamber. The individual wore either clean (fresh) cotton clothes or cotton clothes that had been exposed to the same chamber air concentrations for 9 days. For a 6-h exposure, the net amounts of DEP and DnBP absorbed when wearing fresh clothes were, respectively, 0.017 and 0.007 μg/kg/(μg/m(3)); for exposed clothes the results were 0.178 and 0.261 μg/kg/(μg/m(3)), respectively (values normalized by air concentration and body mass). When compared against the average results for bare-skinned participants, clean clothes were protective, whereas exposed clothes increased dermal uptake for DEP and DnBP by factors of 3.3 and 6.5, respectively. Even for non-occupational environments, wearing clothing that has adsorbed/absorbed indoor air pollutants can increase dermal uptake of SVOCs by substantial amounts relative to bare skin.

Visual effects of the first ladies’ Kebaya clothing on the image of Indonesian women’s appearances

NASA Astrophysics Data System (ADS)

Suciati

2016-04-01

The image of Indonesian women on international level is partly influenced by the appearance of the First Lady. The role and position of the First Lady is the representation of Indonesian women, because basically the First Lady, as the wife who accompanies the President (head of state), has a strong background of cultural grip, high intellectuality and good personality in her daily lifestyle, including in wearing clothes, and as an ambassador of culture and design. Fashion style of the First Lady always draws praise and criticism from the public. The purpose of this study is to reveal the visualization effects of Indonesian First Ladies’ kebaya clothing style in various state occasions on the image of Indonesian women’s appearances. This study is a qualitative research of visual data that emphasizes the discussion of Kebaya Clothing using semiological study (connotation and denotation meaning) that bring out self-image. The results showed that the style the First Ladies’ Kebaya clothing in every presidency period of their husbands had characteristics both in the style of clothing or hairstyle, indicating self-image. The conclusion of this study reveals that the First Ladies’ Kebaya Clothing (National Clothing) is interpreted as having implied messages because clothing can be observed visually. Implication was done on the construction of learning patterns of clothing, national fashion design and Nusantara ethnic clothing design.

Airborne asbestos take-home exposures during handling of chrysotile-contaminated clothing following simulated full shift workplace exposures.

PubMed

Sahmel, Jennifer; Barlow, Christy A; Gaffney, Shannon; Avens, Heather J; Madl, Amy K; Henshaw, John; Unice, Ken; Galbraith, David; DeRose, Gretchen; Lee, Richard J; Van Orden, Drew; Sanchez, Matthew; Zock, Matthew; Paustenbach, Dennis J

2016-01-01

The potential for para-occupational, domestic, or take-home exposures from asbestos-contaminated work clothing has been acknowledged for decades, but historically has not been quantitatively well characterized. A simulation study was performed to measure airborne chrysotile concentrations associated with laundering of contaminated clothing worn during a full shift work day. Work clothing fitted onto mannequins was exposed for 6.5 h to an airborne concentration of 11.4 f/cc (PCME) of chrysotile asbestos, and was subsequently handled and shaken. Mean 5-min and 15-min concentrations during active clothes handling and shake-out were 3.2 f/cc and 2.9 f/cc, respectively (PCME). Mean airborne PCME concentrations decreased by 55% 15 min after clothes handling ceased, and by 85% after 30 min. PCM concentrations during clothes handling were 11-47% greater than PCME concentrations. Consistent with previously published data, daily mean 8-h TWA airborne concentrations for clothes-handling activity were approximately 1.0% of workplace concentrations. Similarly, weekly 40-h TWAs for clothes handling were approximately 0.20% of workplace concentrations. Estimated take-home cumulative exposure estimates for weekly clothes handling over 25-year working durations were below 1 f/cc-year for handling work clothes contaminated in an occupational environment with full shift airborne chrysotile concentrations of up to 9 f/cc (8-h TWA).

Clothing Matching for Visually Impaired Persons

PubMed Central

Yuan, Shuai; Tian, YingLi; Arditi, Aries

2012-01-01

Matching clothes is a challenging task for many blind people. In this paper, we present a proof of concept system to solve this problem. The system consists of 1) a camera connected to a computer to perform pattern and color matching process; 2) speech commands for system control and configuration; and 3) audio feedback to provide matching results for both color and patterns of clothes. This system can handle clothes in deficient color without any pattern, as well as clothing with multiple colors and complex patterns to aid both blind and color deficient people. Furthermore, our method is robust to variations of illumination, clothing rotation and wrinkling. To evaluate the proposed prototype, we collect two challenging databases including clothes without any pattern, or with multiple colors and different patterns under different conditions of lighting and rotation. Results reported here demonstrate the robustness and effectiveness of the proposed clothing matching system. PMID:22523465

Prediction of clothing thermal insulation and moisture vapour resistance of the clothed body walking in wind.

PubMed

Qian, Xiaoming; Fan, Jintu

2006-11-01

Clothing thermal insulation and moisture vapour resistance are the two most important parameters in thermal environmental engineering, functional clothing design and end use of clothing ensembles. In this study, clothing thermal insulation and moisture vapour resistance of various types of clothing ensembles were measured using the walking-able sweating manikin, Walter, under various environmental conditions and walking speeds. Based on an extensive experimental investigation and an improved understanding of the effects of body activities and environmental conditions, a simple but effective direct regression model has been established, for predicting the clothing thermal insulation and moisture vapour resistance under wind and walking motion, from those when the manikin was standing in still air. The model has been validated by using experimental data reported in the previous literature. It has shown that the new models have advantages and provide very accurate prediction.

Image-Based Reverse Engineering and Visual Prototyping of Woven Cloth.

PubMed

Schroder, Kai; Zinke, Arno; Klein, Reinhard

2015-02-01

Realistic visualization of cloth has many applications in computer graphics. An ongoing research problem is how to best represent and capture cloth models, specifically when considering computer aided design of cloth. Previous methods produce highly realistic images, however, they are either difficult to edit or require the measurement of large databases to capture all variations of a cloth sample. We propose a pipeline to reverse engineer cloth and estimate a parametrized cloth model from a single image. We introduce a geometric yarn model, integrating state-of-the-art textile research. We present an automatic analysis approach to estimate yarn paths, yarn widths, their variation and a weave pattern. Several examples demonstrate that we are able to model the appearance of the original cloth sample. Properties derived from the input image give a physically plausible basis that is fully editable using a few intuitive parameters.

Clothing Matching for Visually Impaired Persons.

PubMed

Yuan, Shuai; Tian, Yingli; Arditi, Aries

2011-01-01

Matching clothes is a challenging task for many blind people. In this paper, we present a proof of concept system to solve this problem. The system consists of 1) a camera connected to a computer to perform pattern and color matching process; 2) speech commands for system control and configuration; and 3) audio feedback to provide matching results for both color and patterns of clothes. This system can handle clothes in deficient color without any pattern, as well as clothing with multiple colors and complex patterns to aid both blind and color deficient people. Furthermore, our method is robust to variations of illumination, clothing rotation and wrinkling. To evaluate the proposed prototype, we collect two challenging databases including clothes without any pattern, or with multiple colors and different patterns under different conditions of lighting and rotation. Results reported here demonstrate the robustness and effectiveness of the proposed clothing matching system.

Dynamics of Clothing I. Curriculum Guide. A Family and Consumer Sciences Education Course of Study for Grades 9-12.

ERIC Educational Resources Information Center

Hunger, Dean-Ellen, Ed.; Hancey, Helen-Louise; Hendrickson, Diane; Hicks, Camille; Munns, Barbara; Price, Barbara

This document is a six-unit curriculum guide for a high school (grades 9-12) course in clothing instruction. The units contain one to three lessons on the following topics: (1) psychology of clothing and appearance (role of clothing and clothing choices, personal grooming); (2) design principles (line and design, color); (3) construction…

Individual 3D measurements of end users to personalize work wear clothing

NASA Astrophysics Data System (ADS)

Mielicka, E.; Napieralska, L.; Jasińska, I.; Jarzyna, V.

2017-10-01

Body silhouette 3D measurements need to be performed separately in each country due to significant ethnic differences in body silhouette which preclude the transfer of European data to particular countries. Systematic research allows to update information on the population body silhouette and body proportions as well as select the size changes possible to implement in clothing construction modifications. The diversity in body silhouettes and sizes as well as the issue of clothing fitting encourage clothing producers to provide work wear clothing based on individual measurements of the end users’ bodies. In the framework of the carried research, the group of construction workers was selected as the target group of the analysed work wear clothing users. 42 construction workers, men only, were measured. The body silhouette measurement process was non-contact and was carried out with the use of 3D body scanner. The collected data on the body silhouette allowed to select sizes used to construct the work wear clothing and identify the clothing size. The selected measurement points of the body silhouette underwent statistical analysis to determine the distribution of random variables, here body sizes. The variables distribution characteristics were calculated. On that basis, the fitting appraisal of work wear clothing with respect to the size of the finished product corresponding to the adequate size of individually measured worker/end user was performed. The size overview of the work wear clothing used by the specific professional group and the appraisal of the size fitting to the body silhouette took into consideration the work wear clothing ergonomic functionality with respect to the body posture when performing the tasks, design and clothing construction. The analysis based on the currently gathered end users’ remarks and objections concerning the clothing fitting and performed body silhouette measurements allows to modify the existing work wear clothing for the selected group of end users. The research was aimed at the improvement of the work wear clothing fitting thanks to personalization based on individual body measurements at the stage of construction design.

Can the PHS model (ISO7933) predict reasonable thermophysiological responses while wearing protective clothing in hot environments?

PubMed

Wang, Faming; Kuklane, Kalev; Gao, Chuansi; Holmér, Ingvar

2011-02-01

In this paper, the prediction accuracy of the PHS (predicted heat strain) model on human physiological responses while wearing protective clothing ensembles was examined. Six human subjects (aged 29 ± 3 years) underwent three experimental trials in three different protective garments (clothing thermal insulation I(cl) ranges from 0.63 to 2.01 clo) in two hot environments (40 °C, relative humidities: 30% and 45%). The observed and predicted mean skin temperature, core body temperature and sweat rate were presented and statistically compared. A significant difference was found in the metabolic rate between FIRE (firefighting clothing) and HV (high visibility clothing) or MIL (military clothing) (p < 0.001). Also, the development of heart rate demonstrated the significant effects of the exposure time and clothing ensembles. In addition, the predicted evaporation rate during HV, MIL and FIRE was much lower than the experimental values. Hence, the current PHS model is not applicable for protective clothing with intrinsic thermal insulations above 1.0 clo. The results showed that the PHS model generated unreliable predictions on body core temperature when human subjects wore thick protective clothing such as firefighting clothing (I(cl) > 1.0 clo). The predicted mean skin temperatures in three clothing ensembles HV, MIL and FIRE were also outside the expected limits. Thus, there is a need for further extension for the clothing insulation validation range of the PHS model. It is recommended that the PHS model should be amended and validated by individual algorithms, physical or physiological parameters, and further subject studies.

Effect of clothing weight on body weight.

PubMed

Whigham, L D; Schoeller, D A; Johnson, L K; Atkinson, R L

2013-01-01

In clinical settings, it is common to measure weight of clothed patients and estimate a correction for the weight of clothing, but we can find no papers in the medical literature regarding the variability in clothing weight of adults with weather, season and gender. Fifty adults (35 women) were weighed four times during a 12-month period with and without clothing. Clothing weights were determined and regressed against minimum, maximum and average daily outdoor temperature. The average clothing weight (±s.d.) throughout the year was significantly greater in men than in women (1.2±0.3 vs 0.8±0.3 kg, P<0.0001). The average within-person minimum and the average within-person maximum clothing weights across the year were 0.9±0.2 and 1.5±0.4 kg for men, and 0.5±0.2 and 1.1±0.4 kg for women, respectively. The within-person s.d. in clothing weight was 0.3 kg for both men and women. Over the 55 °C range in the lowest to the highest outdoor temperatures, the regressions predicted a maximal change in clothing weight of only 0.4 kg in women and 0.6 kg in men. The clothing weight of men is significantly greater than that of women, but there is little variability throughout the year. Therefore, a clothing adjustment of approximately 0.8 kg for women and 1.2 kg for men is appropriate regardless of outdoor temperature.

Will Astronauts Wash Clothes on the Way to Mars?

NASA Technical Reports Server (NTRS)

Ewert, Michael K.; Jeng, Frank F.

2015-01-01

Future human space exploration missions will lengthen to years, and keeping crews clothed without a huge resupply burden is an important consideration for habitation systems. A space laundry system could be the solution; however, the resources it uses must be accounted for and must win out over the reliable practice of simply bringing along enough spare underwear. NASA has conducted trade-off studies through its Logistics Reduction Project to compare current space clothing systems, life extension of that clothing, traditional water-based clothes washing, and other sanitizing techniques. The best clothing system depends on the mission and assumptions but, in general, analysis results indicate that washing clothes on space missions will start to pay off as mission durations approach a year.

A Rapid and Efficient Method for Evaluation of Suspect Testimony: Palynological Scanning.

PubMed

Wiltshire, Patricia E J; Hawksworth, David L; Edwards, Kevin J

2015-11-01

A rapid method for evaluating suspect testimony is valuable at any stage in an inquiry and can result in a change of direction in an investigation. Rape cases, in particular, can present problems where a defendant renders DNA analysis redundant by claiming that the claimant consented to have sexual relations. Forensic palynology is valuable in confirming or eliminating locations as being crime scenes, thus checking the testimony of both parties. In contrast to some forensic disciplines, forensic palynology can provide critical information without time-consuming full analysis. Two cases are described where the palynological assemblages from comparator samples of pertinent places were compared with those obtained from clothing of claimants and defendants. The results of rapid microscopical scanning of relevant preparations led to early confessions, thus obviating the need for costly analyses and protracted court proceedings. A third case demonstrates the unbiased nature of this technique where a man, although innocent of any offense, lied about having visited the crime scene for fear of prosecution. This highlights the need for sensitive policing in claims of rape. © 2015 American Academy of Forensic Sciences.

Clothing Flammability and Burn Injuries: Public Opinion Concerning an Overlooked, Preventable Public Health Problem.

PubMed

Frattaroli, Shannon; Spivak, Steven M; Pollack, Keshia M; Gielen, Andrea C; Salomon, Michele; Damant, Gordon H

2016-01-01

The objective of this study was to describe knowledge of clothing flammability risk, public support for clothing flammability warning labels, and stronger regulation to reduce the risk. As part of a national survey of homeowners about residential sprinkler systems, the authors included questions about clothing flammability. The authors used an online web panel to sample homeowners and descriptive methods to analyze the resulting data. The sample included 2333 homeowners. Knowledge of clothing flammability and government oversight of clothing flammability risk was low. Homeowners were evenly split about the effectiveness of current standards; however, when presented with clothing-related burn injury and death data, a majority (53%) supported stricter standards. Most homeowners (64%) supported warning labels and indicated that such labels would either have no effect on their purchasing decisions (64%) or be an incentive (24%) to purchase an item. Owners of sprinkler-equipped homes were more likely to support these interventions than owners of homes without sprinkler systems. Public knowledge about clothing flammability risks is low. Most homeowners supported clothing labels to inform consumers of this risk and increased government intervention to reduce the risk.

Reeling in the textiles at Row Clothing Enterprises

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ridgley, H.

1997-12-01

While a handful of textile processing centers in operation today can date their roots back to the turn of this century or before, Row Clothing Enterprises (Baltimore) first opened its doors in 1985. Soon after, it climbed its way to becoming one of the premier textile processing businesses in the country. And what they want most of all is usable clothing--the discards of American secondhand clothing stores. The company exports 100% of the usable clothing it recovers paying institutions as much as $150 a ton for the material. Graders also sort the material into piles headed for the mutilating, ormore » fiber-shredding, machine. While not all the material is shredded, it does provide more opportunities for resale. Whatever Row cannot resell as clothing--because it is soiled or torn--gets processed into industrial wiping cloths, if it is cotton. Clothing made from wool and polyester is sent to woolen and polyester fiber mills to be made into new clothing. While 80% of Row`s wiper market is domestic, 80% of its fiber market is overseas.« less

Research on Hydrodynamic Interference Suppression of Bottom-Mounted Monitoring Platform with Fairing Structure

NASA Astrophysics Data System (ADS)

Wang, Zhen; Zheng, Yi; Mao, Yu-feng; Wang, Ya-zhou; Yu, Yan-ting; Liu, Hong-ning

2018-03-01

In the disturbance of unsteady flow field under the sea, the monitoring accuracy and precision of the bottom-mounted acoustic monitoring platform will decrease. In order to reduce the hydrodynamic interference, the platform wrapped with fairing structure and separated from the retrieval unit is described. The suppression effect evaluation based on the correlation theory of sound pressure and particle velocity for spherical wave in infinite homogeneous medium is proposed and the difference value between them is used to evaluate the hydrodynamic restraining performance of the bottom-mounted platform under far field condition. Through the sea test, it is indicated that the platform with sparse layers fairing structure (there are two layers for the fairing, in which the inside layer is 6-layers sparse metal net, and the outside layer is 1-layer polyester cloth, and then it takes sparse layers for short) has no attenuation in the sound pressure response to the sound source signal, but obvious suppression in the velocity response to the hydrodynamic noise. The effective frequency of the fairing structure is decreased below 10 Hz, and the noise magnitude is reduced by 10 dB. With the comparison of different fairing structures, it is concluded that the tighter fairing structure can enhance the performance of sound transmission and flow restraining.

Clothing Preferences of Older Women: Implications for Gerontology and the American Clothing Industry.

ERIC Educational Resources Information Center

Spruiell, Phyllis R.; Jernigan, Marian

1982-01-01

Investigated the clothing preferences and problems of older women, using personal interviews. Presents results of preferred styles in detail. Discusses implications of the research for gerontologists in higher education and for the American clothing industry. (RC)

The development and initial validation of a virtual dripping sweat rate and a clothing wetness ratio for use in predictive heat strain models.

PubMed

Kubota, H; Kuwabara, K; Hamada, Y

2014-08-01

This paper applies the heat balance equation (HBE) for clothed subjects as a linear function of mean skin temperature (t sk ) by a new sweating efficiency (η sw ) and an approximation for the thermoregulatory sweat rate. The equation predicting t sk in steady state conditions was derived as the solution of the HBE and used for a predictive heat strain scale. The heat loss from the wet clothing (WCL) area was identified with a new variable of 'virtual dripping sweat rate VDSR' (S wdr ). This is a subject's un-evaporated sweat rate in dry clothing from the regional sweat rate exceeding the maximum evaporative capacity, and adds the moisture to the clothing, reducing the intrinsic clothing insulation. The S wdr allowed a mass balance analysis of the wet clothing area identified as clothing wetness (w cl ). The w cl was derived by combining the HBE at the WCL surface from which the evaporation rate and skin heat loss from WCL region are given. Experimental results on eight young male subjects wearing typical summer clothing, T-shirt and trousers verified the model for predicting t sk with WCL thermal resistance (R cl,w ) identified as 25 % of dry clothing (R cl,d ).

The development and initial validation of a virtual dripping sweat rate and a clothing wetness ratio for use in predictive heat strain models

NASA Astrophysics Data System (ADS)

Kubota, H.; Kuwabara, K.; Hamada, Y.

2014-08-01

This paper applies the heat balance equation (HBE) for clothed subjects as a linear function of mean skin temperature ( t sk ) by a new sweating efficiency ( η sw ) and an approximation for the thermoregulatory sweat rate. The equation predicting t sk in steady state conditions was derived as the solution of the HBE and used for a predictive heat strain scale. The heat loss from the wet clothing (WCL) area was identified with a new variable of `virtual dripping sweat rate VDSR' ( S wdr ). This is a subject's un-evaporated sweat rate in dry clothing from the regional sweat rate exceeding the maximum evaporative capacity, and adds the moisture to the clothing, reducing the intrinsic clothing insulation. The S wdr allowed a mass balance analysis of the wet clothing area identified as clothing wetness ( w cl ). The w cl was derived by combining the HBE at the WCL surface from which the evaporation rate and skin heat loss from WCL region are given. Experimental results on eight young male subjects wearing typical summer clothing, T-shirt and trousers verified the model for predicting t sk with WCL thermal resistance ( R cl,w ) identified as 25 % of dry clothing ( R cl,d ).

Novel Remanufacturing Process of Recycled Polytetrafluoroethylene(PTFE)/GF Laminate

NASA Astrophysics Data System (ADS)

Xi, Z.; Ghita, O. R.; Johnston, P.; Evans, K. E.

2011-01-01

Currently, the PTFE/GF laminate and PTFE PCB manufacturers are under considerable pressure to address the recycling issues due to Waste Electrical and Electronic Equipment (WEEE) Directive, shortage of landfill capacity and cost of disposal. This study is proposing a novel manufacture method for reuse of the mechanical ground PTFE/Glass fibre (GF) laminate and production of the first reconstitute PTFE/GF laminate. The reconstitute PTFE/GF laminate proposed here consists of a layer of recycled sub-sheet, additional layers of PTFE and PTFE coated glass cloth, also covered by copper foils. The reconstitute PTFE/GF laminate showed good dielectric properties. Therefore, there is potential to use the mechanical ground PTFE/GF laminate powder to produce reconstitute PTFE/GF laminate, for use in high frequencies PCB applications.

Clothing and Attributions Concerning Sexual Harassment.

ERIC Educational Resources Information Center

Johnson, Kim K. P.; Workman, Jane E.

1992-01-01

Photographs shown to 98 male and 102 female students illustrated provocative versus nonprovocative clothing on both men and women. Subjects rated provocative clothing more likely to induce sexual harassment. Females who had not experienced harassment rated those wearing nonprovocative clothing unlikely to be harassed. (SK)

Clothing-related burns in New South Wales, Australia: impact of legislation on a continuing problem.

PubMed

Harvey, Lara A; Connolley, Siobhan; Harvey, John G

2015-02-01

To combat the risk of nightwear burns a mandatory standard regulating the design, flammability and labelling requirements of children's nightwear was introduced in Australia in 1987. This population-based study examined the trends, characteristics and causes of clothing-related burns to inform a review of the current standard, and to facilitate the development of targeted prevention strategies. Clothing-related burns for 1998-2013 were identified from hospitalisation data for all hospitals in NSW and detailed information regarding circumstance of injury from a burn data registry. To investigate percentage annual change (PAC) in trends negative binomial regression analysis was performed. There were 541 hospitalisations for clothing-related burns, 18% were nightwear-related and 82% were for other clothing. All clothing burns decreased by an estimated 4% per year (95% CI -6.2 to -2.1). Nightwear-related burns decreased by a significantly higher rate (PAC -7.4%; 95% CI -12.5 to -2.1) than other clothing (PAC -2.5%; 95%CI -4.7 to -0.1). Exposure to open heat source (campfire/bonfire) was the most common cause, followed by cooking. Of factors known to be associated with clothing burns, accelerant use was reported in 27% of cases, cigarettes 17%, loose skirt or dress 8%, and angle grinders in 6% of cases. Hospitalisations for clothing burns are relatively uncommon in NSW and rates, particularly of nightwear burns, have decreased over the last 15 years. Strategies for continued reduction of these injuries include increasing the scope of the current clothing standard or developing new standards to include all children's clothing and adult nightwear, and increasing community awareness of the risk associated with open heat sources, accelerant use and loose clothing. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Expansion of effective wet bulb globe temperature for vapor impermeable protective clothing.

PubMed

Sakoi, Tomonori; Mochida, Tohru; Kurazumi, Yoshihito; Sawada, Shin-Ichi; Horiba, Yosuke; Kuwabara, Kohei

2018-01-01

The wet bulb globe temperature (WBGT) is an effective measure for risk screening to prevent heat dISOrders. However, a heat risk evaluation by WBGT requires adjustments depending on the clothing. In this study, we proposed a new effective WBGT (WBGT eff * ) for general vapor permeable clothing ensembles and vapor impermeable protective clothing that is applicable to occupants engaged in moderate intensity work with a metabolic heat production value of around 174W/m 2 . WBGT eff * enables the conversion of heat stress into the scale experienced by the occupant dressed in the basic clothing ensemble (work clothes) based on the heat balances for a human body. We confirmed that WBGT eff * was effective for expressing the critical thermal environments for the prescriptive zones for occupants wearing vapor impermeable protective clothing. Based on WBGT eff * , we succeeded in clarifying how the weights for natural wet bulb, globe, and air temperatures and the intercept changed depending on clothing properties and the surrounding environmental factors when heat stress is expressed by the weighted sum of natural wet bulb, globe, and air temperatures and the intercept. The weight of environmental temperatures (globe and air temperatures) for WBGT eff * for vapor impermeable protective clothing increased compared with that for general vapor permeable clothing, whereas that of the natural wet bulb temperature decreased. For WBGT eff * in outdoor conditions with a solar load, the weighting ratio of globe temperature increased and that of air temperature decreased with air velocity. Approximation equations of WBGT eff * were proposed for both general vapor permeable clothing ensembles and for vapor impermeable protective clothing. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development and characterization of orthotropic-birefringent materials

NASA Technical Reports Server (NTRS)

Daniel, I. M.; Koller, G. M.; Niiro, T.

1984-01-01

Materials were selected and fabrication procedures developed for orthotropic birefringent materials. An epoxy resin (Maraset 658/558 system) was selected as the matrix material. Fibers obtained from style 3733 glass cloth and type 1062 glass roving were used as reinforcement. Two different fabrication procedures were used. In the first one, layers of unidirectional fibers removed from the glass cloth were stacked, impregnated with resin, bagged and cured in the autoclave at an elevated temperature. In the second procedure, the glass roving was drywound over metal frames, impregnated with resin and cured at room temperature under pressure and vacuum in an autoclave. Unidirectional, angle-ply and quasi-isotropic laminates of two thicknesses and with embedded flaws were fabricated. The matrix and the unidirectional glass/epoxy material were fully characterized. The density, fiber volume ratio, mechanical, and optical properties were determined. The fiber volume ratio was over 0.50. Birefringent properties were in good agreement with predictions based on a stress proportioning concept and also, with one exception, with properties predicted by a finite element analysis. Previously announced in STAR as N81-26183

Evaluation of take-home exposure and risk associated with the handling of clothing contaminated with chrysotile asbestos.

PubMed

Sahmel, J; Barlow, C A; Simmons, B; Gaffney, S H; Avens, H J; Madl, A K; Henshaw, J; Lee, R J; Van Orden, D; Sanchez, M; Zock, M; Paustenbach, D J

2014-08-01

The potential for para-occupational (or take-home) exposures from contaminated clothing has been recognized for the past 60 years. To better characterize the take-home asbestos exposure pathway, a study was performed to measure the relationship between airborne chrysotile concentrations in the workplace, the contamination of work clothing, and take-home exposures and risks. The study included air sampling during two activities: (1) contamination of work clothing by airborne chrysotile (i.e., loading the clothing), and (2) handling and shaking out of the clothes. The clothes were contaminated at three different target airborne chrysotile concentrations (0-0.1 fibers per cubic centimeter [f/cc], 1-2 f/cc, and 2-4 f/cc; two events each for 31-43 minutes; six events total). Arithmetic mean concentrations for the three target loading levels were 0.01 f/cc, 1.65 f/cc, and 2.84 f/cc (National Institute of Occupational Health and Safety [NIOSH] 7402). Following the loading events, six matched 30-minute clothes-handling and shake-out events were conducted, each including 15 minutes of active handling (15-minute means; 0.014-0.097 f/cc) and 15 additional minutes of no handling (30-minute means; 0.006-0.063 f/cc). Percentages of personal clothes-handling TWAs relative to clothes-loading TWAs were calculated for event pairs to characterize exposure potential during daily versus weekly clothes-handling activity. Airborne concentrations for the clothes handler were 0.2-1.4% (eight-hour TWA or daily ratio) and 0.03-0.27% (40-hour TWA or weekly ratio) of loading TWAs. Cumulative chrysotile doses for clothes handling at airborne concentrations tested were estimated to be consistent with lifetime cumulative chrysotile doses associated with ambient air exposure (range for take-home or ambient doses: 0.00044-0.105 f/cc year). © 2014 Society for Risk Analysis.

46 CFR 160.049-3 - Materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... Cotton fabrics and coated upholstery cloth meeting the minimum requirements set forth in paragraphs (c... Type I, Class 3 material. (2) Coated upholstery cloth. Coated upholstery cloth shall comply with the..., class I, laminated vinyl-nylon high strength cloth in accordance with the requirements of Specification...

46 CFR 160.049-3 - Materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... Cotton fabrics and coated upholstery cloth meeting the minimum requirements set forth in paragraphs (c... Type I, Class 3 material. (2) Coated upholstery cloth. Coated upholstery cloth shall comply with the..., class I, laminated vinyl-nylon high strength cloth in accordance with the requirements of Specification...

46 CFR 160.077-5 - Incorporation by reference.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., Breaking of Woven Cloth; Grab Method. (ii) Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method. (iii) Method 5134, Strength of Cloth, Tearing; Tongue Method. (iv) Method 5804.1, Weathering Resistance of Cloth; Accelerated Weathering Method. (v) Method 5762, Mildew Resistance of Textile Materials...

46 CFR 160.077-5 - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Elongation, Breaking of Woven Cloth; Grab Method. (2) Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method. (3) Method 5134, Strength of Cloth, Tearing; Tongue Method. (4) Method 5804.1, Weathering Resistance of Cloth; Accelerated Weathering Method. (5) Method 5762, Mildew Resistance of Textile Materials...

46 CFR 160.077-5 - Incorporation by reference.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., Breaking of Woven Cloth; Grab Method. (ii) Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method. (iii) Method 5134, Strength of Cloth, Tearing; Tongue Method. (iv) Method 5804.1, Weathering Resistance of Cloth; Accelerated Weathering Method. (v) Method 5762, Mildew Resistance of Textile Materials...

46 CFR 160.049-3 - Materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... Cotton fabrics and coated upholstery cloth meeting the minimum requirements set forth in paragraphs (c... Type I, Class 3 material. (2) Coated upholstery cloth. Coated upholstery cloth shall comply with the..., class I, laminated vinyl-nylon high strength cloth in accordance with the requirements of Specification...

46 CFR 160.077-5 - Incorporation by reference.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Elongation, Breaking of Woven Cloth; Grab Method. (2) Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method. (3) Method 5134, Strength of Cloth, Tearing; Tongue Method. (4) Method 5804.1, Weathering Resistance of Cloth; Accelerated Weathering Method. (5) Method 5762, Mildew Resistance of Textile Materials...

10 CFR 850.29 - Protective clothing and equipment.

Code of Federal Regulations, 2010 CFR

2010-01-01

....132, Personal Protective Equipment General Requirements, when workers use personal protective clothing... 10 Energy 4 2010-01-01 2010-01-01 false Protective clothing and equipment. 850.29 Section 850.29... § 850.29 Protective clothing and equipment. (a) The responsible employer must provide protective...

10 CFR 850.29 - Protective clothing and equipment.

Code of Federal Regulations, 2011 CFR

2011-01-01

....132, Personal Protective Equipment General Requirements, when workers use personal protective clothing... 10 Energy 4 2011-01-01 2011-01-01 false Protective clothing and equipment. 850.29 Section 850.29... § 850.29 Protective clothing and equipment. (a) The responsible employer must provide protective...

High-Accuracy Measurement of Small Movement of an Object behind Cloth Using Airborne Ultrasound

NASA Astrophysics Data System (ADS)

Hoshiba, Kotaro; Hirata, Shinnosuke; Hachiya, Hiroyuki

2013-07-01

The acoustic measurement of vital information such as breathing and heartbeat in the standing position whilst the subject is wearing clothes is a difficult problem. In this paper, we present the basic experimental results to measure small movement of an object behind cloth. We measured acoustic characteristics of various types of cloth to obtain the transmission loss through cloth. To observe the relationship between measurement error and target speed under a low signal-to-noise ratio (SNR), we tried to measure the movement of an object behind cloth. The target was placed apart from the cloth to separate the target reflection from the cloth reflection. We found that a small movement of less than 6 mm/s could be observed using the M-sequence, moving target indicator (MTI) filter, and tracking phase difference, when the SNR was less than 0 dB. We also present the results of theoretical error analysis in the MTI filter and phase tracking for high-accuracy measurement. Characteristics of the systematic error were clarified.

Effect of clothing material on thermal responses of the human body

NASA Astrophysics Data System (ADS)

Fengzhi, Li; Yi, Li

2005-09-01

The influence of clothing material on thermal responses of the human body are investigated by using an integrated model of a clothed thermoregulatory human body. A modified 25-nodes model considering the sweat accumulation on the skin surface is applied to simulate the human physiological regulatory responses. The heat and moisture coupled transfer mechanisms, including water vapour diffusion, the moisture evaporation/condensation, the moisture sorbtion/desorption by fibres, liquid sweat transfer under capillary pressure, and latent heat absorption/release due to phase change, are considered in the clothing model. On comparing prediction results with the experimental data in the literature, the proposed model seems able to predict dynamic heat and moisture transfer between the human body and the clothing system. The human body's thermal responses and clothing temperature and moisture variations are compared for different clothing materials during transient periods. We concluded that the hygroscopicity of clothing materials influences the human thermoregulation process significantly during environmental transients.

Non-iterative distance constraints enforcement for cloth drapes simulation

NASA Astrophysics Data System (ADS)

Hidajat, R. L. L. G.; Wibowo, Arifin, Z.; Suyitno

2016-03-01

A cloth simulation represents the behavior of cloth objects such as flag, tablecloth, or even garments has application in clothing animation for games and virtual shops. Elastically deformable models have widely used to provide realistic and efficient simulation, however problem of overstretching is encountered. We introduce a new cloth simulation algorithm that replaces iterative distance constraint enforcement steps with non-iterative ones for preventing over stretching in a spring-mass system for cloth modeling. Our method is based on a simple position correction procedure applied at one end of a spring. In our experiments, we developed a rectangle cloth model which is initially at a horizontal position with one point is fixed, and it is allowed to drape by its own weight. Our simulation is able to achieve a plausible cloth drapes as in reality. This paper aims to demonstrate the reliability of our approach to overcome overstretches while decreasing the computational cost of the constraint enforcement process due to an iterative procedure that is eliminated.

Validation of the principles of injury risk zones for motorcycle protective clothing.

PubMed

de Rome, Liz; Meredith, Lauren; Ivers, Rebecca; Brown, Julie

2014-09-01

The distributions of motorcycle crash impacts and injuries were compared to the four impact risk zones and protective performance specified in the European Standard for motorcycle clothing (EN 13595). Crashed motorcyclists' (n=117) injuries and clothing damage were categorized by body area into the four risk zones. Three levels of protection were defined: protective clothing with impact protection, protective clothing only and non-protective clothing. The distribution of impact/injury sites corresponded to the predictions of EN 13595, with the proportion of all injuries decreasing from 43.9% in Zone 1, to 18.0%, 16.7%, and 11.5% in Zones 2 to 4, respectively. Protective clothing modified the distribution of injuries with substantially more injuries (OR=2.69, 95% CL: 20.1-3.59) at unprotected impact sites. These findings support an appropriate framework for determining performance specifications for the manufacture of motorcycle clothing that will effectively reduce the risk of injury in crashes. Copyright © 2014 Elsevier Ltd. All rights reserved.

Measurements of clothing evaporative resistance using a sweating thermal manikin: an overview

PubMed Central

WANG, Faming

2017-01-01

Evaporative resistance has been widely used to describe the evaporative heat transfer property of clothing. It is also a critical variable in heat stress models for predicting human physiological responses in various environmental conditions. At present, sweating thermal manikins provide a fast and cost-effective way to determine clothing evaporative resistance. Unfortunately, the measurement repeatability and reproducibility of evaporative resistance are rather low due to the complicated moisture transfer processes through clothing. This review article presents a systematical overview on major influential factors affecting the measurement precision of clothing evaporative resistance measurements. It also illustrates the state-of-the-art knowledge on the development of test protocol to measure clothing evaporative resistance by means of a sweating manikin. Some feasible and robust test procedures for measurement of clothing evaporative resistance using a sweating manikin are described. Recommendations on how to improve the measurement accuracy of clothing evaporative resistance are addressed and expected future trends on development of advanced sweating thermal manikins are finally presented. PMID:28566566

Bone-eating Osedax worms (Annelida: Siboglinidae) regulate biodiversity of deep-sea whale-fall communities

NASA Astrophysics Data System (ADS)

Alfaro-Lucas, Joan M.; Shimabukuro, Maurício; Ferreira, Giulia D.; Kitazato, Hiroshi; Fujiwara, Yoshihiro; Sumida, Paulo Y. G.

2017-12-01

Although it is well recognized the capital role of "bone-eating" Osedax worms in the degradation of vertebrate skeletons in the deep sea, very little is known about their effects on bone faunal assemblages. Here we aim to shed light on the bone colonization process and determine 1) whether Osedax degradation induces different bone epi/infaunal assemblages and 2) how biodiversity is affected by Osedax colonization. We describe and compare the epi/infaunal assemblage structures of caudal vertebrae colonized and not colonized by Osedax of an abyssal juvenile whale carcass serendipitously found at 4204 m depth in the SW Atlantic Ocean by HOV Shinkai 6500. Our results show that whale skeletons are very heterogeneous habitats that harbor specific and very rich assemblages and that contrasting epi/infaunal community patterns are found depending on the presence of Osedax. Vertebrae not colonized by Osedax were both well preserved and in a highly sulfophilic stage with chemosynthetic bacterial mats and numerous epifaunal organisms that fed on them. On the contrary, vertebrae colonized by Osedax were heavily degraded and did not exhibit evidence of a sulfophilic stage, harboring a distinct epifaunal assemblage. In general, bone infaunal assemblages were dominated by nematodes, especially in vertebrae without Osedax (ca. 77%) where organisms were only found in bone outer layers, showing a colonization pattern similar to that described for bacteria. Infauna in Osedax-colonized bones were present throughout the inner-matrices and were on average three times more abundant (ca. 1800 ind. 100 cm-3) and twice as rich in number of species (16 species). Here, bones had a relatively higher proportion of the polychaete Capitella iatapiuna (ca. 39%) in comparison with nematodes (ca. 52%). Besides, a higher number of rare species were present in bones with Osedax. We suggest that Osedax degradation increases water diffusion through matrices probably modifying reduced-compound fluxes and truncating the sulfophilic stage. Furthermore, it is likely that larger and distinct infaunal biodiversity is a result of an increase in bone structural complexity caused by Osedax, which also facilitates the colonization of inner-bone matrices. We conclude that Osedax is an important ecosystem engineer that enhances biodiversity in deep-sea whale-fall communities.

A cluster randomised trial of cloth masks compared with medical masks in healthcare workers.

PubMed

MacIntyre, C Raina; Seale, Holly; Dung, Tham Chi; Hien, Nguyen Tran; Nga, Phan Thi; Chughtai, Abrar Ahmad; Rahman, Bayzidur; Dwyer, Dominic E; Wang, Quanyi

2015-04-22

The aim of this study was to compare the efficacy of cloth masks to medical masks in hospital healthcare workers (HCWs). The null hypothesis is that there is no difference between medical masks and cloth masks. 14 secondary-level/tertiary-level hospitals in Hanoi, Vietnam. 1607 hospital HCWs aged ≥18 years working full-time in selected high-risk wards. Hospital wards were randomised to: medical masks, cloth masks or a control group (usual practice, which included mask wearing). Participants used the mask on every shift for 4 consecutive weeks. Clinical respiratory illness (CRI), influenza-like illness (ILI) and laboratory-confirmed respiratory virus infection. The rates of all infection outcomes were highest in the cloth mask arm, with the rate of ILI statistically significantly higher in the cloth mask arm (relative risk (RR)=13.00, 95% CI 1.69 to 100.07) compared with the medical mask arm. Cloth masks also had significantly higher rates of ILI compared with the control arm. An analysis by mask use showed ILI (RR=6.64, 95% CI 1.45 to 28.65) and laboratory-confirmed virus (RR=1.72, 95% CI 1.01 to 2.94) were significantly higher in the cloth masks group compared with the medical masks group. Penetration of cloth masks by particles was almost 97% and medical masks 44%. This study is the first RCT of cloth masks, and the results caution against the use of cloth masks. This is an important finding to inform occupational health and safety. Moisture retention, reuse of cloth masks and poor filtration may result in increased risk of infection. Further research is needed to inform the widespread use of cloth masks globally. However, as a precautionary measure, cloth masks should not be recommended for HCWs, particularly in high-risk situations, and guidelines need to be updated. Australian New Zealand Clinical Trials Registry: ACTRN12610000887077. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

The professional clothing bank as evidence-based practice.

PubMed

Bishop, SueZanne Monique

2015-01-01

Little research exists linking interview-appropriate attire to improved employment outcomes for women. Thus, it appears that the professional clothing bank has not been investigated as evidence-based practice. To provide preliminary evidence for clothing banks, in this article the author synthesizes findings from existing research on the provision of a professional clothing bank as a means for offering interview-appropriate attire to poor women in job readiness programming. For context, job readiness programs are explored and a case study of one program operating a professional clothing bank is presented. Finally, preliminary considerations for planning and implementing clothing banks based on this literature review are given.

Guidelines for the selection of chemical-protective clothing. Volume 1. (3rd Edition). Report for January 1985-May 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwope, A.D.; Costas, P.P.; Jackson, J.O.

1987-02-01

A variety of protective-clothing items are commerically available for emergency response and other applications where chemical hazards may be encountered. Data and information for selecting chemical-protective clothing is either not available or is inconsistant from source to source. In 1983, the U.S. Environmental Protection Agency sponsored the development of chemical-protective clothing selection guidelines to assist their own Office of Health and Safety in providing guidance to personnel, primarily EPA employees and contractors, working on hazardous-waste sites. These guidelines allowed a user to select an appropriate protective material for a specific chemical, select a clothing item (glove, suit, etc.) and thenmore » determine which manufacturers offered the clothing item in the selected material. The U.S. Coast Guard Office of Research and Development and the EPA have supplemented these guidelines with additional data on material chemical resistance, material physical properties, clothing design features, and specific-vendor products. A chapter has been added for selecting chemical protective suits. These guidelines contain data for over 750 chemicals and 700 clothing products. Volume I provides the performance information and recommendations for selecting different types of protective clothing.« less

Maximum allowable exposure to different heat radiation levels in three types of heat protective clothing

PubMed Central

HEUS, Ronald; DENHARTOG, Emiel A.

2017-01-01

To determine safe working conditions in emergency situations at petro-chemical plants in the Netherlands a study was performed on three protective clothing combinations (operator’s, firefighter’s and aluminized). The clothing was evaluated at four different heat radiation levels (3.0, 4.6, 6.3 and 10.0 k∙W∙m−2) in standing and walking posture with a thermal manikin RadMan™. Time till pain threshold (43°C) is set as a cut-off criterion for regular activities. Operator’s clothing did not fulfil requirements to serve as protective clothing for necessary activities at heat radiation levels above 1.5 k∙W∙m−2 as was stated earlier by Den Hartog and Heus1). With firefighter’s clothing it was possible to work almost three min up to 4.6 k∙W∙m−2. At higher heat radiation levels firefighter’s clothing gave insufficient protection and aluminized clothing should be used. Maximum working times in aluminized clothing at 6.3 k∙W∙m−2 was about five min. At levels of 10.0 k∙W∙m−2 (emergency conditions) emergency responders should move immediately to lower heat radiation levels. PMID:28978903

Clothing Protection from Ultraviolet Radiation: A New Method for Assessment.

PubMed

Gage, Ryan; Leung, William; Stanley, James; Reeder, Anthony; Barr, Michelle; Chambers, Tim; Smith, Moira; Signal, Louise

2017-11-01

Clothing modifies ultraviolet radiation (UVR) exposure from the sun and has an impact on skin cancer risk and the endogenous synthesis of vitamin D. There is no standardized method available for assessing body surface area (BSA) covered by clothing, which limits generalizability between study findings. We calculated the body cover provided by 38 clothing items using diagrams of BSA, adjusting the values to account for differences in BSA by age. Diagrams displaying each clothing item were developed and incorporated into a coverage assessment procedure (CAP). Five assessors used the CAP and Lund & Browder chart, an existing method for estimating BSA, to calculate the clothing coverage of an image sample of 100 schoolchildren. Values of clothing coverage, inter-rater reliability and assessment time were compared between CAP and Lund & Browder methods. Both methods had excellent inter-rater reliability (>0.90) and returned comparable results, although the CAP method was significantly faster in determining a person's clothing coverage. On balance, the CAP method appears to be a feasible method for calculating clothing coverage. Its use could improve comparability between sun-safety studies and aid in quantifying the health effects of UVR exposure. © 2017 The American Society of Photobiology.

Composite Flexible Blanket Insulation

NASA Technical Reports Server (NTRS)

Kourtides, Demetrius A. (Inventor); Pitts, William C. (Inventor); Goldstein, Howard E. (Inventor); Sawko, Paul M. (Inventor)

1991-01-01

Composite flexible multilayer insulation systems (MLI) were evaluated for thermal performance and compared with the currently used fibrous silica (baseline) insulation system. The systems described are multilayer insulations consisting of alternating layers of metal foil and scrim ceramic cloth or vacuum metallized polymeric films quilted together using ceramic thread. A silicon carbide thread for use in the quilting and the method of making it are also described. These systems are useful in providing lightweight insulation for a variety of uses, particularly on the surface of aerospace vehicles subject to very high temperatures during flight.

Effect of clothing weight on body weight

USDA-ARS?s Scientific Manuscript database

Background: In clinical settings, it is common to measure weight of clothed patients and estimate a correction for the weight of clothing, but we can find no papers in the medical literature regarding the variability in clothing weight with weather, season, and gender. Methods: Fifty adults (35 wom...

46 CFR 153.933 - Chemical protective clothing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Chemical protective clothing. 153.933 Section 153.933... § 153.933 Chemical protective clothing. When table 1 refers to this section, the following apply: (a) The master shall ensure that the following chemical protective clothing constructed of materials...

46 CFR 153.933 - Chemical protective clothing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Chemical protective clothing. 153.933 Section 153.933... § 153.933 Chemical protective clothing. When table 1 refers to this section, the following apply: (a) The master shall ensure that the following chemical protective clothing constructed of materials...

46 CFR 153.933 - Chemical protective clothing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Chemical protective clothing. 153.933 Section 153.933... § 153.933 Chemical protective clothing. When table 1 refers to this section, the following apply: (a) The master shall ensure that the following chemical protective clothing constructed of materials...

46 CFR 153.933 - Chemical protective clothing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Chemical protective clothing. 153.933 Section 153.933... § 153.933 Chemical protective clothing. When table 1 refers to this section, the following apply: (a) The master shall ensure that the following chemical protective clothing constructed of materials...

46 CFR 153.933 - Chemical protective clothing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Chemical protective clothing. 153.933 Section 153.933... § 153.933 Chemical protective clothing. When table 1 refers to this section, the following apply: (a) The master shall ensure that the following chemical protective clothing constructed of materials...

77 FR 13887 - Energy Conservation Program: Test Procedures for Residential Clothes Washers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-07

... Energy Conservation Program: Test Procedures for Residential Clothes Washers; Final Rule #0;#0;Federal... Conservation Program: Test Procedures for Residential Clothes Washers AGENCY: Office of Energy Efficiency and...) establishes new test procedures for residential clothes washers under the Energy Policy and Conservation Act...

28 CFR 97.16 - Clothing requirements for transported violent prisoners.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Clothing requirements for transported... transported violent prisoners. Companies covered under this part must ensure that all violent prisoners they transport are clothed in brightly colored clothing that clearly identifies them as violent prisoners, unless...

28 CFR 97.16 - Clothing requirements for transported violent prisoners.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Clothing requirements for transported... transported violent prisoners. Companies covered under this part must ensure that all violent prisoners they transport are clothed in brightly colored clothing that clearly identifies them as violent prisoners, unless...

Clothing Deprivation Feelings of Three Adolescent Ethnic Groups.

ERIC Educational Resources Information Center

Kness, Darlene

1983-01-01

Investigated clothing deprivation/satisfaction feelings of 301 Afro-, Anglo-, and Mexican-American adolescents and reported the development of a clothing satisfaction instrument. Clothing satisfaction was associated with social security and number of dresses for Anglo-Americans, with socioeconomic status and number of shoes for Mexican-Americans.…

Learning and Recognition of Clothing Genres From Full-Body Images.

PubMed

Hidayati, Shintami C; You, Chuang-Wen; Cheng, Wen-Huang; Hua, Kai-Lung

2018-05-01

According to the theory of clothing design, the genres of clothes can be recognized based on a set of visually differentiable style elements, which exhibit salient features of visual appearance and reflect high-level fashion styles for better describing clothing genres. Instead of using less-discriminative low-level features or ambiguous keywords to identify clothing genres, we proposed a novel approach for automatically classifying clothing genres based on the visually differentiable style elements. A set of style elements, that are crucial for recognizing specific visual styles of clothing genres, were identified based on the clothing design theory. In addition, the corresponding salient visual features of each style element were identified and formulated with variables that can be computationally derived with various computer vision algorithms. To evaluate the performance of our algorithm, a dataset containing 3250 full-body shots crawled from popular online stores was built. Recognition results show that our proposed algorithms achieved promising overall precision, recall, and -score of 88.76%, 88.53%, and 88.64% for recognizing upperwear genres, and 88.21%, 88.17%, and 88.19% for recognizing lowerwear genres, respectively. The effectiveness of each style element and its visual features on recognizing clothing genres was demonstrated through a set of experiments involving different sets of style elements or features. In summary, our experimental results demonstrate the effectiveness of the proposed method in clothing genre recognition.

Spatial language, question type, and young children's ability to describe clothing: Legal and developmental implications.

PubMed

Stolzenberg, Stacia N; McWilliams, Kelly; Lyon, Thomas D

2017-08-01

Children's descriptions of clothing placement and touching with respect to clothing are central to assessing child sexual abuse allegations. This study examined children's ability to answer the types of questions attorneys and interviewers typically ask about clothing, using the most common spatial terms (on/off, outside/inside, over/under). Ninety-seven 3- to 6-year-olds were asked yes/no (e.g., "Is the shirt on?"), forced-choice (e.g., "Is the shirt on or off?"), open-choice (e.g., "Is the shirt on or off or something else?"), or where questions (e.g., "Where is the shirt?") about clothing using a human figurine, clothing, and stickers. Across question types, children generally did well with simple clothing or sticker placement (e.g., pants completely on), except for yes/no questions about "over," suggesting children had an underinclusive understanding of the word. When clothing or sticker placement was intermediate (e.g., pants around ankles, and therefore neither completely on nor off), children performed poorly except when asked where questions. A similar task using only stickers and boxes, analogous to forensic interviewers' assessments of children's understanding, was only weakly predictive of children's ability to describe clothing. The results suggest that common methods of questioning young children about clothing may lead to substantial misinterpretation. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Reconstruction of paleoenvironmental changes based on the planktonic foraminiferal assemblages off Shimokita (Japan) in the northwestern North Pacific

NASA Astrophysics Data System (ADS)

Kuroyanagi, Azumi; Kawahata, Hodaka; Narita, Hisashi; Ohkushi, Ken'ichi; Aramaki, Takafumi

2006-08-01

Planktonic foraminifera live in the upper ocean, and their assemblages can record the surrounding environment. To reconstruct changes in water masses and the timing of flow of the Oyashio and Tsugaru currents through the Tsugaru Strait after the Last Glacial Maximum, when the Japan Sea had been almost isolated from the surrounding seas, we investigated at high resolution the planktonic foraminiferal fauna in seafloor sediments off the Shimokita (core MD01-2409: 41°33.9'N, 141°52.1'E), in the northwestern North Pacific, over the last 26,900 years. Factor analysis of the foraminiferal assemblage suggests that the water mass changed significantly as a result of the deglacial sea-level rise and opening of the straits into the Japan Sea. Mass accumulation rates of some selected foraminiferal species that inhabit characteristic environments (e.g., warm stratified water, Oyashio Current, Tsushima Current) corroborate these changes in water mass and water column structure. We also used the ratio of the dextral form to total Neogloboquadrina pachyderma as an indicator of subsurface (below the pycnocline) water temperature. We recognized five distinct periods of oceanographic change at the study site, which is just east of the Tsugaru Strait: (1) Oyashio Current affecting both surface and subsurface waters (26.9-15.7 thousand calendar years before present (cal. kyr BP)); (2) vertical mixing and subsurface warming as the Oyashio Current began to flow into the Japan Sea through the Tsugaru Strait (15.7-10.6 cal. kyr BP); (3) outflow of the Tsugaru Current from the Japan Sea into the Pacific, leading to baroclinic conditions, with the surface layer under the influence of the Tsugaru and the subsurface layers of the Oyashio Current (10.6-9.0 cal. kyr BP); (4) stratification of the water column developed as the flow of the Tsugaru Current increased (9.0-6.2 cal. kyr BP); and (5) warming of the subsurface layer, disruption of the stratification, and dominance of the Tsugaru Current in both surface and subsurface layers, similar to the present situation (6.2-1.5 cal. kyr BP). The timing of flow of the Oyashio and Tsugaru currents through the strait at the study site off Shimokita is generally compatible with the results of studies in the Japan Sea. The flow of the Tsugaru Current led to progressive warming of the waters, from the surface to the subsurface layers and from the Japan Sea side to the Pacific side of the Tsugaru Strait, beginning in 8.3-6.8 cal. kyr BP on the western side, and in 6.2 cal. kyr BP on the eastern side of the strait. By 4.8 cal. kyr BP on the western side, and by ˜ 3.4 cal. kyr BP on the eastern side of the strait, warm water prevailed in both surface and subsurface layers.

Allergens retained in clothing.

PubMed

Nedorost, Susan; Kessler, Margaret; McCormick, Thomas

2007-12-01

Some patients state compliance with avoidance of identified allergens, yet have persistent dermatitis in areas under tight-fitting clothing. To analyze a series of such cases to identify allergens most likely retained in clothing. Review of contact dermatitis clinic cases and identification of type and formula weight of allergens involved. High-formula-weight allergens and allergens present in medicament ointments are difficult to dissolve in laundry detergent and water and may be retained in clothing. Retention of allergens in clothing, even after washing, may explain recalcitrant dermatitis in a patient who states compliance with avoidance of a seemingly relevant allergen. Dermatologists should consider the possibility of allergen retention in clothing whenever a patient has only partial clearing after at least 1 month of attempted compliance with avoidance of identified allergens. Purchase of new clothing may be required to clear allergic contact dermatitis in this situation.

16 CFR 300.29 - Garments or products composed of or containing miscellaneous cloth scraps.

Code of Federal Regulations, 2013 CFR

2013-01-01

... containing miscellaneous cloth scraps. 300.29 Section 300.29 Commercial Practices FEDERAL TRADE COMMISSION... Labeling § 300.29 Garments or products composed of or containing miscellaneous cloth scraps. (a) For wool products which consist of, or are made from, miscellaneous cloth scraps comprising manufacturing by...

16 CFR 300.29 - Garments or products composed of or containing miscellaneous cloth scraps.

Code of Federal Regulations, 2014 CFR

2014-01-01

... containing miscellaneous cloth scraps. 300.29 Section 300.29 Commercial Practices FEDERAL TRADE COMMISSION... Labeling § 300.29 Garments or products composed of or containing miscellaneous cloth scraps. (a) For wool products which consist of, or are made from, miscellaneous cloth scraps comprising manufacturing by...

16 CFR 300.29 - Garments or products composed of or containing miscellaneous cloth scraps.

Code of Federal Regulations, 2012 CFR

2012-01-01

... containing miscellaneous cloth scraps. 300.29 Section 300.29 Commercial Practices FEDERAL TRADE COMMISSION... Labeling § 300.29 Garments or products composed of or containing miscellaneous cloth scraps. (a) For wool products which consist of, or are made from, miscellaneous cloth scraps comprising manufacturing by...

46 CFR 160.176-4 - Incorporation by reference.

Code of Federal Regulations, 2012 CFR

2012-10-01

... and Elongation, Breaking of Woven Cloth; Grab Method—160.176-13 (2) Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method—160.176-13 (3) Method 5134, Strength of Cloth, Tearing; Tongue Method—160.176-13 (4) Method 5804.1, Weathering Resistance of Cloth; Accelerated Weathering Method—160.176-8 (5...

16 CFR 300.29 - Garments or products composed of or containing miscellaneous cloth scraps.

Code of Federal Regulations, 2010 CFR

2010-01-01

... containing miscellaneous cloth scraps. 300.29 Section 300.29 Commercial Practices FEDERAL TRADE COMMISSION... Labeling § 300.29 Garments or products composed of or containing miscellaneous cloth scraps. (a) For wool products which consist of, or are made from, miscellaneous cloth scraps comprising manufacturing by...

16 CFR 300.29 - Garments or products composed of or containing miscellaneous cloth scraps.

Code of Federal Regulations, 2011 CFR

2011-01-01

... containing miscellaneous cloth scraps. 300.29 Section 300.29 Commercial Practices FEDERAL TRADE COMMISSION... Labeling § 300.29 Garments or products composed of or containing miscellaneous cloth scraps. (a) For wool products which consist of, or are made from, miscellaneous cloth scraps comprising manufacturing by...

76 FR 22453 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-21

.... These impacts continue well beyond 2100. Table I-3 shows the annualized values for the clothes dryer... Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and Room Air Conditioners... 1904-AA89 Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

75 FR 5578 - Submission for OMB Review; Comment Request-Flammability Standards for Clothing Textiles and Vinyl...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-03

... Standards for Clothing Textiles and Vinyl Plastic Film AGENCY: Consumer Product Safety Commission. ACTION... Commission's flammability standards for clothing textiles and vinyl plastic film. DATES: Written comments on... collection requirements should be captioned ``Clothing Textiles and Film, Collection of Information'' and...

Clothing and Textile Student Modules.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

Forty-seven performance-based instructional modules on six major topics are provided for the home economics content area of clothing and textiles. The six topics are (1) planning basics (psychological, physical, social, and behavioral aspects of clothing; elements of design; principles of design; and style and fashion in clothing), (2) buyership…

46 CFR 197.555 - Personal protective clothing and equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Personal protective clothing and equipment. 197.555... SAFETY AND HEALTH STANDARDS GENERAL PROVISIONS Benzene § 197.555 Personal protective clothing and equipment. (a) When the use of respirators in compliance with § 197.550 and the personal protective clothing...

46 CFR 197.555 - Personal protective clothing and equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Personal protective clothing and equipment. 197.555... SAFETY AND HEALTH STANDARDS GENERAL PROVISIONS Benzene § 197.555 Personal protective clothing and equipment. (a) When the use of respirators in compliance with § 197.550 and the personal protective clothing...

[Resources on Clothing for Persons with Special Needs].

ERIC Educational Resources Information Center

P.R.I.D.E. Foundation, Inc., Groton, CT.

The resource guide to the modification of clothing for disabled individuals suggests solutions to clothing, grooming, and home management problems for a variety of handicapping conditions. Services of PRIDE (Promote Real Independence for the Disabled and Elderly) are noted, including manuals on clothing for the disabled, a workshop, a curriculum…

Deep Sea Drilling Project Site 612 bolide event: New evidence of a late Eocene impact-wave deposit and a possible impact site, US east coast

USGS Publications Warehouse

Wei, W.; Poag, C. Wylie; Poppe, Lawrence J.; Folger, David W.; Powars, David S.; Mixon, Robert B.; Edwards, Lucy E.; Bruce, Scott

1992-01-01

A remarkable >60-m-thick, upward-fining, polymictic, marine boulder bed is distributed over >15 000 km2 beneath Chesapeake Bay and the surrounding Middle Atlantic Coastal Plain and inner continental shelf. The wide varieties of clast lithologies and microfossil assemblages were derived from at least seven known Cretaceous, Paleocene, and Eocene stratigraphic units. The supporting pebbly matrix contains variably mixed assemblages of microfossils along with trace quantities of impact ejecta. The youngest microfossils in the boulder bed are of early-late Eocene age. On the basis of its unusual characteristics and its stratigraphic equivalent to a layer of impact ejecta at Deep Sea Drilling Project (DSDP) Site 612. It is postulated that this boulder bed was formed by a powerful bolide-generated wave train that scoured the ancient inner shelf and coastal plain of southeastern Virginia. 

Clothing factors and vaginitis.

PubMed

Heidrich, F E; Berg, A O; Bergman, J J

1984-10-01

Associations of clothing factors and vulvovaginal symptoms, signs, and microbiology were sought in 203 women seeking care at a university family medicine clinic. Clothing factors studied were use of panty hose, underwear for sleep, cotton lining panels, and pants vs skirts. Women wearing and not wearing panty hose had similar rates of vaginitis symptoms and signs, but yeast vaginitis was about three times more common among wearers. Relationships of other clothing factors to vaginitis were not found. Nonspecific vaginitis was not found to be related to clothing.

Comparison of Observed Beta Cloth Interactions with Simulated and Actual Space Environment

NASA Technical Reports Server (NTRS)

Kamenetzy, R. R.; Finckenor, M. M.

1999-01-01

A common component of multilayer insulation blankets is beta cloth, a woven fiberglass cloth impregnated with Teflon(TM). It is planned for extensive use on the International Space Station. The Environmental Etl'ects Group of the Marshall Space Flight Center Materials, Processing, and Manufacturing Department has investigated the impact of atomic oxygen (AO) and ultraviolet (UV) radiation on the optical properties of plain and aluminized beta cloth. both in the laboratory and as part of long-duration flight experiments. These investigations indicate that beta cloth is susceptible to darkening in the presence of UV radiation, dependent on the additives used. AO interactions resulted in bleaching of the beta cloth.

Fatal asphyxiations in children involving drawstrings on clothing.

PubMed Central

Petruk, J; Shields, E; Cummings, G E; Francescutti, L H

1996-01-01

Injuries account for more deaths and hospital admissions among children and adolescents than all diseases combined. The authors report two deaths by asphyxiation that resulted from drawstrings on the children's clothing becoming entangled on slides. Although such incidents are not common, they are preventable. The authors urge physicians to counsel parents and guardians to remove drawstrings from children's clothing, and they call upon the government and the clothing industry to work toward improving the safety standards for the design, manufacture and importation of children's clothing and banning the sale of children's clothing with drawstrings in Canada. In addition, they provide several resources for readers interested in helping reduce playground hazards in their communities. PMID:8943929

Ungulate browsers promote herbaceous layer diversity in logged temperate forests

USGS Publications Warehouse

Faison, Edward K.; DeStefano, Stephen; Foster, David R.; Motzkin, Glenn; Rapp, Josh

2016-01-01

Ungulates are leading drivers of plant communities worldwide, with impacts linked to animal density, disturbance and vegetation structure, and site productivity. Many ecosystems have more than one ungulate species; however, few studies have specifically examined the combined effects of two or more species on plant communities. We examined the extent to which two ungulate browsers (moose [Alces americanus]) and white-tailed deer [Odocoileus virginianus]) have additive (compounding) or compensatory (opposing) effects on herbaceous layer composition and diversity, 5–6 years after timber harvest in Massachusetts, USA. We established three combinations of ungulates using two types of fenced exclosures – none (full exclosure), deer (partial exclosure), and deer + moose (control) in six replicated blocks. Species composition diverged among browser treatments, and changes were generally additive. Plant assemblages characteristic of closed canopy forests were less abundant and assemblages characteristic of open/disturbed habitats were more abundant in deer + moose plots compared with ungulate excluded areas. Browsing by deer + moose resulted in greater herbaceous species richness at the plot scale (169 m2) and greater woody species richness at the subplot scale (1 m2) than ungulate exclusion and deer alone. Browsing by deer + moose resulted in strong changes to the composition, structure, and diversity of forest herbaceous layers, relative to areas free of ungulates and areas browed by white-tailed deer alone. Our results provide evidence that moderate browsing in forest openings can promote both herbaceous and woody plant diversity. These results are consistent with the classic grazing-species richness curve, but have rarely been documented in forests.

Horizontal/Vertical Stock Fund Cost Comparison

DTIC Science & Technology

1974-08-01

units. Installation Supply Division account and other instal- lation operated activities: Self -Service Supply Store, Clothing Initial...installation supply operations are the Self -Service Supply Center, Clothing Sales Store, Central Issue Facility, and Clothing Initial Issue Point. Stock- age...stocks, stocks for installation operated supply activities such as the Self Service Supply Store, Clothing Sales Store and

10 CFR 429.21 - Residential clothes dryers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Residential clothes dryers. 429.21 Section 429.21 Energy... COMMERCIAL AND INDUSTRIAL EQUIPMENT Certification § 429.21 Residential clothes dryers. (a) Sampling plan for selection of units for testing. (1) The requirements of § 429.11 are applicable to clothes dryers; and (2...

10 CFR 429.21 - Residential clothes dryers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Residential clothes dryers. 429.21 Section 429.21 Energy... COMMERCIAL AND INDUSTRIAL EQUIPMENT Certification § 429.21 Residential clothes dryers. (a) Sampling plan for selection of units for testing. (1) The requirements of § 429.11 are applicable to clothes dryers; and (2...

10 CFR 429.21 - Residential clothes dryers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Residential clothes dryers. 429.21 Section 429.21 Energy... COMMERCIAL AND INDUSTRIAL EQUIPMENT Certification § 429.21 Residential clothes dryers. (a) Sampling plan for selection of units for testing. (1) The requirements of § 429.11 are applicable to clothes dryers; and (2...

78 FR 35875 - Proposed Extension of Approval of Information Collection; Comment Request: Clothing Textiles...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-14

... Information Collection; Comment Request: Clothing Textiles, Vinyl Plastic Film AGENCY: Consumer Product Safety... Clothing Textiles (16 CFR part 1610) and the Standard for the Flammability of Vinyl Plastic Film (16 CFR... vinyl plastic film and vinyl plastic film intended for use in clothing (except children's sleepwear in...

The Right Stuff: Fashioning an Identity through Clothing in a Junior School.

ERIC Educational Resources Information Center

Swain, Jon

2002-01-01

Explored the role of clothing in expressing individual and collective identity among preadolescent English students. Results found that a relaxed enforcement of school uniforms created space for students to use clothing to gain recognition, generate common bonds, and share interests within peer groups. Clothing and footwear were used as an…

Testing fungus impregnated cloths for the control of adult Aedes aegypti under natural conditions.

PubMed

Paula, Adriano R; Carolino, Aline T; Silva, Carlos P; Pereira, César R; Samuels, Richard I

2013-09-08

Entomopathogenic fungi could be useful tools for reducing populations of the dengue mosquito Aedes aegypti. Here the efficiency of fungus (Metarhizium anisopliae) impregnated cloths (with and without imidacloprid [IMI]) was evaluated against adult A. aegypti in simulated human dwellings. Behaviour of mosquitoes in the presence of black cloths was also investigated. When mosquitoes were released into the test rooms, the lowest survival rates (38%) were seen when five black cloths impregnated with conidia of ESALQ 818 + 10 ppm IMI were fixed under tables and chairs. This result was significantly lower than the survival rate recorded when cloths were impregnated with ESALQ 818 alone (44%) or ESALQ 818 + 0.1 ppm IMI (43%). Blood fed A. aegypti had lower landing frequencies on black cloths than sucrose fed insects during the first 24 h following feeding, which may have been due to reduced flight activity. Few mosquitoes (4-5%) were observed to land on the cloths during the hours of darkness. The landing pattern of sucrose-fed mosquitoes on non-treated and fungus-treated cloths was similar. The synergism between M. anisopliae and IMI significantly reduced Aedes survival in simulated field conditions. The use of fungus impregnated cloths is a promising point source application method for the control of adult A. aegypti.

Correction of the heat loss method for calculating clothing real evaporative resistance.

PubMed

Wang, Faming; Zhang, Chengjiao; Lu, Yehu

2015-08-01

In the so-called isothermal condition (i.e., Tair [air temperature]=Tmanikin [manikin temperature]=Tr [radiant temperature]), the actual energy used for moisture evaporation detected by most sweating manikins was underestimated due to the uncontrolled fabric 'skin' temperature Tsk,f (i.e., Tsk,f

Effect of Clothing on Measurement of Bone Mineral Density.

PubMed

McNamara, Elizabeth A; Feldman, Anna Z; Malabanan, Alan O; Abate, Ejigayehu G; Whittaker, LaTarsha G; Yano-Litwin, Amanda; Dorazio, Jolene; Rosen, Harold N

2016-01-01

It is unknown whether allowing patients to have BMD (bone mineral density) studies acquired while wearing radiolucent clothing adlib contributes appreciably to the measurement error seen. To examine this question, a spine phantom was scanned 30 times without any clothing, while draped with a gown, and while draped with heavy winter clothing. The effect on mean BMD and on SD (standard deviation) was assessed. The effect of clothing on mean or SD of the area was not significant. The effect of clothing on mean and SD for BMD was small but significant and was around 1.6% for the mean. However, the effect on BMD precision was much more clinically important. Without clothing the spine phantom had an least significant change of 0.0077 gm/cm(2), while when introducing variability of clothing the least significant change rose as high as 0.0305 gm/cm(2). We conclude that, adding clothing to the spine phantom had a small but statistically significant effect on the mean BMD and on variance of the measurement. It is unlikely that the effect on mean BMD has any clinical significance, but the effect on the reproducibility (precision) of the result is likely clinically significant. Copyright © 2016 The International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.

EPRI Guide to Managing Nuclear Utility Protective Clothing Programs. PCEVAL User`s Manual, A computer code for evaluating the economics of nuclear plant protective clothing programs: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, J.J.; Kelly, D.M.

1993-10-01

The Electric Power Research Institute (EPRI) commissioned a radioactive waste related project (RP2414-34) in 1989 to produce a guide for developing and managing nuclear plant protective clothing programs. Every nuclear facility must coordinate some type of protective clothing program for its radiation workers to ensure proper and safe protection for the wearer and to maintain control over the spread of contamination. Yet, every nuclear facility has developed its own unique program for managing such clothing. Accordingly, a need existed for a reference guide to assist with standardizing protective clothing programs and in controlling the potentially escalating economics of such programs.more » The initial Guide to Managing Nuclear Utility Protective Clothing Programs, NP-7309, was published in May 1991. Since that time, a number of utilities have reviewed and/or used the report to enhance their protective clothing programs. Some of these utilities requested that a computer program be developed to assist utilities in evaluating the economics of protective clothing programs consistent with the guidance in NP-7309. The PCEVAL computer code responds to that industry need. This report, the PCEVAL User`s Manual, provides detailed instruction on use of the software.« less

Brucite-driven CO2 uptake in serpentinized dunites (Ligurian Ophiolites, Montecastelli, Tuscany)

NASA Astrophysics Data System (ADS)

Boschi, Chiara; Dini, Andrea; Baneschi, Ilaria; Bedini, Federica; Perchiazzi, Natale; Cavallo, Andrea

2017-09-01

Understanding the mechanism of serpentinite weathering at low temperature - that involves carbonate formation - has become increasingly important because it represents an analog study for a cost-efficient carbon disposal strategy (i.e. carbon mineralization technology or mineral Carbon dioxide Capture and Storage, CCS). At Montecastelli (Tuscany, Italy), on-going spontaneous mineral CO2 sequestration is enhanced by brucite-rich serpentinized dunites. The dunites are embedded in brucite-free serpentinized harzburgites that belong to the ophiolitic Ligurian Units (Northern Apennine thrust-fold belt). Two main serpentinization events produced two distinct mineral assemblages in the reactive dunite bodies. The first assemblage consists of low-T pseudomorphic, mesh-textured serpentine, Fe-rich brucite (up to 20 mol.% Fe(OH)2) and minor magnetite. This was overprinted by a non-pseudomorphic, relatively high-T assemblage consisting of serpentine, Fe-poor brucite (ca. 4 mol% Fe(OH)2) and abundant magnetite. The harzburgite host rock developed a brucite-free paragenesis made of serpentine and magnetite. Present-day interaction of serpentinized dunites with slightly acidic and oxidizing meteoric water, enhances brucite dissolution and leads to precipitation of both Mg-Fe layered double hydroxides (coalingite-pyroaurite, LDHs) and hydrous Mg carbonates (hydromagnesite and nesquehonite). In contrast, the brucite-free serpentinized harzburgites are not affected by the carbonation process. In the serpentinized dunites, different carbonate minerals form depending on brucite composition (Fe-rich vs Fe-poor). Reactions in serpentinized dunites containing Fe-rich brucite produce a carbonate assemblage dominated by LDHs and minor amount of hydromagnesite. Serpentinites with a Fe-poor brucite assemblage contain large amounts of hydromagnesite and minor LDHs. Efficiency of CO2 mineral sequestration is different in the two cases owing to the distinct carbon content of LDHs (ca. 1.5 wt.%) and hydromagnesite (ca. 10 wt.%). Here, for the first time, we link the mineral composition of serpentinized ultramafic rocks to carbonate formation, concluding that Fe-poor brucite maximizes the mineral CCS efficiency.

Guidelines for the selection of chemical-protective clothing. Volume 2. Technical and reference manual. (3rd Edition). Report for January 1985-March 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwope, A.D.; Costas, P.P.; Jackson, J.O.

1987-02-01

A variety of protective-clothing items are commercially available for emergency response and other applications where chemical hazards may be encountered. Data and information for selecting chemical-protective clothing is either not available or is inconsistant from source to source. In 1983, the U.S. Environmental Protection Agency sponsored the development of chemical-protective clothing selection guidelines to assist their own Office of Health and Safety in providing guidance to personnel, primarily EPA employees and contractors, working on hazardous-waste sites. These guidelines allowed a user to select an appropriate protective material for a specific chemical, select a clothing item (glove, suit, etc.), and thenmore » determine which manufacturers offered the clothing item in the recommended material. The U.S, Coast Guard Office of Research and Development and the EPA have supplemented these guidelines with additional data on material chemical resistance, material physical properties, clothing design features, and specific-vendor products. A chapter has been added for selecting chemical-protective suits. These guidelines contain data for over 750 chemicals and 700 clothing products. Volume I provides performance information and recommendations for selecting different types of protective clothing. Volume II contains a detailed technical discussion, and the data on which Volume I recommendations are based. The U.S. Coast Guard intends to use these guidelines for protective-clothing selection by its National Strike Force and Marine Safety Offices.« less

Performance of a water suction system using hydrophilic fibrous cloth under low gravity and microgravity in parabolic flight.

PubMed

Tani, A; Saito, T; Kitaya, Y; Takahashi, H; Goto, E

2000-06-01

For suction of water from a water supply vessel including both water and air under microgravity and g-jitter conditions, a water suction system using hydrophilic fibrous cloth was developed and its performance was evaluated at 0.01-0.02 g-realized for 20 s by parabolic flight in an aircraft. Vessels used for the experiment were glass flasks and had a suction port for suction filtration. A piece of hydrophilic fibrous cloth was arranged along the inner surface of the vessels and the end was fixed to the suction port of the vessels. In vessel without hydrophilic cloths and containing 220 mL of water, the water did not move more than 5 mm along the inner surface and did not reach the suction port under low gravity. When hydrophilic cloths were used, on the other hand, water gathered onto the cloth surface, moved up along the cloth and reached the suction port under low gravity. The amount of water sucked from vessels varied with the amount of water in the vessel and the sectional area of hydrophilic cloths. When the vessels including both water and air were flown during parabolic flight (10(-4) g), water in the vessel moved along the cloth and a water film was formed on the cloth. These results indicated that it is possible to suck water using the fibrous cloth suction system under low gravity and microgravity conditions. Under low gravity conditions, it was difficult to suck water only. However, it is not necessary to separate water from air when the system is used for supplying water to plant root medium consisting of both liquid and gas phases.

Potential applications of smart clothing solutions in health care and personal protection.

PubMed

Meinander, Harriet; Honkala, Markku

2004-01-01

The rapid development in the fields of sensor and telecommunication technologies has created completely new possibilities also for the textile and clothing field. New smart textile and clothing systems can be developed by integrating sensors in the textile constructions. Application fields for these added-value products are e.g. protective clothing for extreme environments, garments for the health care sector, technical textiles, sport and leisure wear. Some products have already been introduced on the markets, but generally it can be stated that the development is only in its starting phase, and the expectations for the future are big. Many different aspects have to be considered in the development of the wearable technology products for the health care sector: medical problems and their diagnosis, sensor choice, data processing and telecommunication solutions, clothing requirements. A functional product can be achieved only if all aspects work together, and therefore experts from all fields should participate in the RTD projects. In the EC-funded project DE3002 Easytex clothing and textiles for disabled and elderly people were investigated. Some recommendations concerning durability, appearance, comfort, service and safety of products for different special user groups were defined, based on user questionnaires and seminars, general textile and clothing requirements and on laboratory test series."Clothing Area Network--Clan" is a research project aiming to develop a technical concept and technology needed in enabling both wired and wireless data and power transfer between different intelligent modules (user interfaces, sensors, CPU's, batteries etc.) integrated into a smart clothing system. Fire-fighters clothing system is chosen as the development platform, being a very challenging application from which the developed technology can be transferred to other protective clothing systems.

Flip flops, dress clothes, and no coat: clothing barriers to children's physical activity in child-care centers identified from a qualitative study

PubMed Central

2009-01-01

Background Three-quarters of 3-6 year-old children in the U.S. spend time in childcare; many spend most of their waking hours in these settings. Daily physical activity offers numerous health benefits, but activity levels vary widely across centers. This study was undertaken to explore reasons why physical activity levels may vary. The purpose of this paper is to summarize an unexpected finding that child-care providers cited was a key barrier to children's physical activity. Methods Nine focus groups with 49 child-care providers (55% black) from 34 centers (including inner-city, suburban, Head Start and Montessori) were conducted in Cincinnati, OH. Three independent raters analyzed verbatim transcripts for themes. Several techniques were used to increase credibility of findings, including interviews with 13 caregivers. Results Two major themes about clothing were: 1) children's clothing was a barrier to children's physical activity in child-care, and 2) clothing choices were a significant source of conflict between parents and child-care providers. Inappropriate clothing items included: no coat/hat/gloves in the wintertime, flip flops or sandals, dress/expensive clothes, jewelry, and clothes that were either too loose or too tight. Child-care providers explained that unless there were enough extra coats at the center, a single child without a coat could prevent the entire class from going outside. Caregivers suggested several reasons why parents may dress their child inappropriately, including forgetfulness, a rushed morning routine, limited income to buy clothes, a child's preference for a favorite item, and parents not understanding the importance of outdoor play. Several child-care providers favored specific policies prohibiting inappropriate clothing, as many reported limited success with verbal or written reminders to bring appropriate clothing. Conclusion Inappropriate clothing may be an important barrier to children's physical activity in child-care settings, particularly if the clothing of a few children preclude physical activity for the remaining children. Center directors and policy makers should consider devising clear and specific policies for the types of clothing that will be permitted in these settings so that children's active play opportunities are not curtailed. To enhance compliance, parents may need education about the importance and benefits of active play for children's development. PMID:19895677

Flip flops, dress clothes, and no coat: clothing barriers to children's physical activity in child-care centers identified from a qualitative study.

PubMed

Copeland, Kristen A; Sherman, Susan N; Kendeigh, Cassandra A; Saelens, Brian E; Kalkwarf, Heidi J

2009-11-06

Three-quarters of 3-6 year-old children in the U.S. spend time in childcare; many spend most of their waking hours in these settings. Daily physical activity offers numerous health benefits, but activity levels vary widely across centers. This study was undertaken to explore reasons why physical activity levels may vary. The purpose of this paper is to summarize an unexpected finding that child-care providers cited was a key barrier to children's physical activity. Nine focus groups with 49 child-care providers (55% black) from 34 centers (including inner-city, suburban, Head Start and Montessori) were conducted in Cincinnati, OH. Three independent raters analyzed verbatim transcripts for themes. Several techniques were used to increase credibility of findings, including interviews with 13 caregivers. Two major themes about clothing were: 1) children's clothing was a barrier to children's physical activity in child-care, and 2) clothing choices were a significant source of conflict between parents and child-care providers. Inappropriate clothing items included: no coat/hat/gloves in the wintertime, flip flops or sandals, dress/expensive clothes, jewelry, and clothes that were either too loose or too tight. Child-care providers explained that unless there were enough extra coats at the center, a single child without a coat could prevent the entire class from going outside. Caregivers suggested several reasons why parents may dress their child inappropriately, including forgetfulness, a rushed morning routine, limited income to buy clothes, a child's preference for a favorite item, and parents not understanding the importance of outdoor play. Several child-care providers favored specific policies prohibiting inappropriate clothing, as many reported limited success with verbal or written reminders to bring appropriate clothing. Inappropriate clothing may be an important barrier to children's physical activity in child-care settings, particularly if the clothing of a few children preclude physical activity for the remaining children. Center directors and policy makers should consider devising clear and specific policies for the types of clothing that will be permitted in these settings so that children's active play opportunities are not curtailed. To enhance compliance, parents may need education about the importance and benefits of active play for children's development.

Personal Protection of Permethrin-Treated Clothing against Aedes aegypti, the Vector of Dengue and Zika Virus, in the Laboratory

PubMed Central

Orsborne, James; DeRaedt Banks, Sarah; Hendy, Adam; Gezan, Salvador A.; Kaur, Harparkash; Wilder-Smith, Annelies; Lindsay, Steve W.; Logan, James G.

2016-01-01

Background The dengue and Zika viruses are primarily transmitted by Aedes aegypti mosquitoes, which are most active during day light hours and feed both in and outside of the household. Personal protection technologies such as insecticide-treated clothing could provide individual protection. Here we assessed the efficacy of permethrin-treated clothing on personal protection in the laboratory. Methods The effect of washing on treated clothing, skin coverage and protection against resistant and susceptible Ae. aegypti was assessed using modified WHO arm-in-cage assays. Coverage was further assessed using free-flight room tests to investigate the protective efficacy of unwashed factory-dipped permethrin-treated clothing. Clothing was worn as full coverage (long sleeves and trousers) and partial coverage (short sleeves and shorts). Residual permethrin on the skin and its effect on mosquitoes was measured using modified WHO cone assays and quantified using high-pressure liquid chromatography (HPLC) analysis. Results In the arm-in-cage assays, unwashed clothing reduced landing by 58.9% (95% CI 49.2–66.9) and biting by 28.5% (95% CI 22.5–34.0), but reduced to 18.5% (95% CI 14.7–22.3) and 11.1% (95% CI 8.5–13.8) respectively after 10 washes. Landing and biting for resistant and susceptible strains was not significantly different (p<0.05). In free-flight room tests, full coverage treated clothing reduced landing by 24.3% (95% CI 17.4–31.7) and biting by 91% (95% CI 82.2–95.9) with partial coverage reducing landing and biting by 26.4% (95% CI 20.3–31.2) and 49.3% (95% CI 42.1–59.1) respectively with coverage type having no significant difference on landing (p<0.05). Residual permethrin was present on the skin in low amounts (0.0041mg/cm2), but still produced a KD of >80% one hour after wearing treated clothing. Conclusion Whilst partially covering the body with permethrin-treated clothing provided some protection against biting, wearing treated clothing with long sleeves and trousers provided the highest form of protection. Washing treated clothing dramatically reduced protection provided. Permethrin-treated clothing could provide protection to individuals from Ae. aegypti that show permethrin resistance. Additionally, it could continue to provide protection even after the clothing has been worn. Field trials are urgently needed to determine whether clothing can protect against dengue and Zika. PMID:27187593

Personal Protection of Permethrin-Treated Clothing against Aedes aegypti, the Vector of Dengue and Zika Virus, in the Laboratory.

PubMed

Orsborne, James; DeRaedt Banks, Sarah; Hendy, Adam; Gezan, Salvador A; Kaur, Harparkash; Wilder-Smith, Annelies; Lindsay, Steve W; Logan, James G

2016-01-01

The dengue and Zika viruses are primarily transmitted by Aedes aegypti mosquitoes, which are most active during day light hours and feed both in and outside of the household. Personal protection technologies such as insecticide-treated clothing could provide individual protection. Here we assessed the efficacy of permethrin-treated clothing on personal protection in the laboratory. The effect of washing on treated clothing, skin coverage and protection against resistant and susceptible Ae. aegypti was assessed using modified WHO arm-in-cage assays. Coverage was further assessed using free-flight room tests to investigate the protective efficacy of unwashed factory-dipped permethrin-treated clothing. Clothing was worn as full coverage (long sleeves and trousers) and partial coverage (short sleeves and shorts). Residual permethrin on the skin and its effect on mosquitoes was measured using modified WHO cone assays and quantified using high-pressure liquid chromatography (HPLC) analysis. In the arm-in-cage assays, unwashed clothing reduced landing by 58.9% (95% CI 49.2-66.9) and biting by 28.5% (95% CI 22.5-34.0), but reduced to 18.5% (95% CI 14.7-22.3) and 11.1% (95% CI 8.5-13.8) respectively after 10 washes. Landing and biting for resistant and susceptible strains was not significantly different (p<0.05). In free-flight room tests, full coverage treated clothing reduced landing by 24.3% (95% CI 17.4-31.7) and biting by 91% (95% CI 82.2-95.9) with partial coverage reducing landing and biting by 26.4% (95% CI 20.3-31.2) and 49.3% (95% CI 42.1-59.1) respectively with coverage type having no significant difference on landing (p<0.05). Residual permethrin was present on the skin in low amounts (0.0041mg/cm2), but still produced a KD of >80% one hour after wearing treated clothing. Whilst partially covering the body with permethrin-treated clothing provided some protection against biting, wearing treated clothing with long sleeves and trousers provided the highest form of protection. Washing treated clothing dramatically reduced protection provided. Permethrin-treated clothing could provide protection to individuals from Ae. aegypti that show permethrin resistance. Additionally, it could continue to provide protection even after the clothing has been worn. Field trials are urgently needed to determine whether clothing can protect against dengue and Zika.

Multiple Concentric Cylinder Model (MCCM) user's guide

NASA Technical Reports Server (NTRS)

Williams, Todd O.; Pindera, Marek-Jerzy

1994-01-01

A user's guide for the computer program mccm.f is presented. The program is based on a recently developed solution methodology for the inelastic response of an arbitrarily layered, concentric cylinder assemblage under thermomechanical loading which is used to model the axisymmetric behavior of unidirectional metal matrix composites in the presence of various microstructural details. These details include the layered morphology of certain types of ceramic fibers, as well as multiple fiber/matrix interfacial layers recently proposed as a means of reducing fabrication-induced, and in-service, residual stress. The computer code allows efficient characterization and evaluation of new fibers and/or new coating systems on existing fibers with a minimum of effort, taking into account inelastic and temperature-dependent properties and different morphologies of the fiber and the interfacial region. It also facilitates efficient design of engineered interfaces for unidirectional metal matrix composites.

Neandertal and Denisovan DNA from Pleistocene sediments.

PubMed

Slon, Viviane; Hopfe, Charlotte; Weiß, Clemens L; Mafessoni, Fabrizio; de la Rasilla, Marco; Lalueza-Fox, Carles; Rosas, Antonio; Soressi, Marie; Knul, Monika V; Miller, Rebecca; Stewart, John R; Derevianko, Anatoly P; Jacobs, Zenobia; Li, Bo; Roberts, Richard G; Shunkov, Michael V; de Lumley, Henry; Perrenoud, Christian; Gušić, Ivan; Kućan, Željko; Rudan, Pavao; Aximu-Petri, Ayinuer; Essel, Elena; Nagel, Sarah; Nickel, Birgit; Schmidt, Anna; Prüfer, Kay; Kelso, Janet; Burbano, Hernán A; Pääbo, Svante; Meyer, Matthias

2017-05-12

Although a rich record of Pleistocene human-associated archaeological assemblages exists, the scarcity of hominin fossils often impedes the understanding of which hominins occupied a site. Using targeted enrichment of mitochondrial DNA, we show that cave sediments represent a rich source of ancient mammalian DNA that often includes traces of hominin DNA, even at sites and in layers where no hominin remains have been discovered. By automation-assisted screening of numerous sediment samples, we detected Neandertal DNA in eight archaeological layers from four caves in Eurasia. In Denisova Cave, we retrieved Denisovan DNA in a Middle Pleistocene layer near the bottom of the stratigraphy. Our work opens the possibility of detecting the presence of hominin groups at sites and in areas where no skeletal remains are found. Copyright © 2017, American Association for the Advancement of Science.

Chironomids as indicators of natural and human impacts in a 700-yr record from the northern Patagonian Andes

NASA Astrophysics Data System (ADS)

Williams, Natalia; Rieradevall, Maria; Añón Suárez, Diego; Rizzo, Andrea; Daga, Romina; Ribeiro Guevara, Sergio; Arribére, María Angélica

2016-09-01

Chironomid communities were studied in a sediment core collected from Lake Moreno Oeste, located in Nahuel Huapi National Park. A major change in midge assemblages occurred at ∼AD 1760, which was characterized by a decrease of "cold taxa" including Polypedilum sp.2 and Dicrotendipes, and an increase of "warm taxa" including Apsectrotanypus and Polypedilum sp.1. These taxa are likely related to climatic conditions concurrent with the end of a cold period at ∼AD 1500-1700 and the beginning of a drying climate at ∼AD 1740-1900 in northern Patagonia. Coarse tephra layers had low midge diversity; however they did not disrupt the climatic trend as the community recovered rapidly after the event. Since AD 1910, after the increase in suburban housing, fish introduction, and the construction of a road, there was an increase in the relative abundances of taxa typically associated with the littoral zone, such as Parapsectrocladius, Riethia, Apsectrotanypus, and some Tanytarsini morphotypes. The main change in the chironomid community appears to be associated with long-term climate change. At the beginning of the 20th century, other site-specific environmental factors (catchment change and fish introduction) altered the chironomid assemblages, making it more difficult to understand the relative importance of each driver of assemblage change.

Plant community influences on soil microfungal assemblages in boreal mixed-wood forests.

PubMed

De Bellis, T; Kernaghan, G; Widden, P

2007-01-01

We studied the relationships between assemblages of soil microfungi and plant communities in the southern boreal mixed-wood forests of Quebec. Sampling took place in 18,100 m2 plots from an existing research site. Plots were separated into three categories based on dominant overstory tree species: (i) trembling aspen, (ii) white birch and (iii) a mixture of white spruce and balsam fir. Within each plot a 1 m2 subplot was established in which the understory herbaceous layer was surveyed and soil cores were collected. Microfungi were isolated from soil cores with the soil-washing technique and isolates were identified morphologically. To support our morphological identifications DNA sequences were obtained for the most abundant microfungi. The most frequently occurring microfungal species were Penicillium thomii, P. spinulosum, P. janthinellum, Penicillium sp., P. melinii, Trichoderma polysporum, T. viride, T. hamatum, Mortierella ramanniana, Geomyces pannorum, Cylindrocarpon didymum, Mortierella sp. and Mucor hiemalis. Multivariate analyses (redundancy analysis followed by variance partitioning) revealed that most of the variation in microfungal communities was explained by understory plant species composition as opposed to soil chemistry or overstory tree species. In this floristically diverse system saprophytic microfungal assemblages were not correlated with the overstory tree species but were significantly correlated with the main understory herbs, thereby reflecting differences at a smaller spatial scale.

30 CFR 57.15007 - Protective equipment or clothing for welding, cutting, or working with molten metal.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Protective equipment or clothing for welding... equipment or clothing for welding, cutting, or working with molten metal. Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. ...

30 CFR 57.15007 - Protective equipment or clothing for welding, cutting, or working with molten metal.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Protective equipment or clothing for welding... equipment or clothing for welding, cutting, or working with molten metal. Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. ...

30 CFR 57.15007 - Protective equipment or clothing for welding, cutting, or working with molten metal.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Protective equipment or clothing for welding... equipment or clothing for welding, cutting, or working with molten metal. Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. ...

30 CFR 57.15007 - Protective equipment or clothing for welding, cutting, or working with molten metal.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Protective equipment or clothing for welding... equipment or clothing for welding, cutting, or working with molten metal. Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. ...

30 CFR 57.15007 - Protective equipment or clothing for welding, cutting, or working with molten metal.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Protective equipment or clothing for welding... equipment or clothing for welding, cutting, or working with molten metal. Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. ...

Is a Space Laundry Needed for Exploration?

NASA Technical Reports Server (NTRS)

Ewert, Michael K.; Jeng, Frank F.

2014-01-01

Future human space exploration missions will lengthen to years, and keeping crews clothed without a huge resupply burden is an important consideration for habitation systems. A space laundry system could be the solution; however, the resources it uses must be accounted for and must win out over the very reliable practice of bringing along enough spare underwear. Through NASA's Logistics Reduction and Repurposing project, trade off studies have been conducted to compare current space clothing systems, life extension of that clothing, traditional water based clothes washing and other sanitizing techniques. The best clothing system of course depends on the mission and assumptions, but in general, analysis results indicate that washing clothes on space missions will start to pay off as mission durations push past a year.

46 CFR 154.1840 - Protective clothing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Operations § 154.1840 Protective clothing... operation, except those assigned to gas-safe cargo control rooms, wears protective clothing. ...

46 CFR 154.1840 - Protective clothing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Operations § 154.1840 Protective clothing... operation, except those assigned to gas-safe cargo control rooms, wears protective clothing. ...

Scripting patienthood with patient clothing.

PubMed

Topo, Päivi; Iltanen-Tähkävuori, Sonja

2010-06-01

The potential of care environments to promote patient healing has gained increasing attention over the last decade, with evidence-based designs used to explore developments in this field. Medical textiles, such as clothes provided to patients, are part of the care environment in many countries. Our study focuses on patients' experiences of such clothing. The goal of this research is to understand how patienthood is constructed in relation to patient clothing and the practices around their use. The study is based on four group interviews involving a total of 12 people with experience of being patients in a hospital or of visiting residential care environments. We employed an active interview format, and the medical textiles currently used in Finnish hospitals and residential care facilities were available for scrutiny during the interviews. Content analyses were carried out on the interview transcripts. Patient clothing was critically evaluated by the participants; they experienced giving up their own clothes as akin to a rite of passage into their new role as a patient. The low status of a patient in a hospital environment was symbolised by the outworn appearance of patient clothing and the problems in protecting privacy. Patient clothing was also felt to provide limited possibilities for being active and in some cases was found to be annoying or even harmful and upsetting. For patients, being dressed in patient clothing may be symbolic of lower status and narrowed agency in everyday life. We can conclude that artefacts such as clothing worn in care environments need to be given attention when considering possibilities for improving care. Copyright 2010 Elsevier Ltd. All rights reserved.

Swim performance and thermoregulatory effects of wearing clothing in a simulated cold-water survival situation.

PubMed

Bowes, Heather; Eglin, Clare M; Tipton, Michael J; Barwood, Martin J

2016-04-01

Accidental cold-water immersion (CWI) impairs swim performance, increases drowning risk and often occurs whilst clothed. The impact of clothing on thermoregulation and swim performance during CWI was explored with the view of making recommendations on whether swimming is viable for self-rescue; contrary to the traditional recommendations. Ten unhabituated males (age 24 (4) years; height 1.80 (0.08) m; mass 78.50 (10.93) kg; body composition 14.8 (3.4) fat %) completed four separate CWIs in 12 °C water. They either rested clothed or naked (i.e. wearing a bathing costume) or swum self-paced clothed or naked for up to 1 h. Swim speed, distance covered, oxygen consumption and thermal responses (rectal temperature (T re), mean skin temperature (T msk) and mean body temperature T b) were measured. When clothed, participants swum at a slower pace and for a significantly shorter distance (815 (482) m, 39 (19) min) compared to when naked (1264 (564) m, 52 (18) min), but had a similar oxygen consumption indicating clothing made them less efficient. Swimming accelerated the rate of T msk and T b cooling and wearing clothing partially attenuated this drop. The impairment to swimming performance caused by clothing was greater than the thermal benefit it provided; participants withdrew due to exhaustion before hypothermia developed. Swimming is a viable self-rescue method in 12 °C water, however, clothing impairs swimming capability. Self-rescue swimming could be considered before clinical hypothermia sets in for the majority of individuals. These suggestions must be tested for the wider population.

Use of a human skin in vitro model to investigate the influence of 'every-day' clothing and skin surface decontamination on the percutaneous penetration of organophosphates.

PubMed

Moore, C A; Wilkinson, S C; Blain, P G; Dunn, M; Aust, G A; Williams, F M

2014-08-17

Organophosphates (OPs) are widely used in agriculture. Many studies have investigated the capability of personal protective equipment (PPE) to reduce chemical exposure; however, investigations into the protective effect of 'every-day' clothing are rare. The purpose of this study was to investigate the protective effect of 'every-day' clothing against dermal exposure and to measure early decontamination of skin following exposure to chlorpyrifos and dichlorvos. Using human skin in vitro, absorption of (14)C-labelled chlorpyrifos (500 ng/cm(2)), was shown to be significantly reduced when applied to clothed skin (cotton shirt), regardless of application vehicle (isopropanol (IPA) or propylene glycol (PG)). The majority of applied dose was retained within the clothing after 4 h exposure. Significant reduction in absorption of chlorpyrifos (in PG) was seen through clothed skin when supplemented with skin decontamination at 4 h, compared with clothed skin decontaminated after 24 h, however, this was not observed with IPA. Absorption of dichlorvos (5 μg/cm(2)) was greater through unclothed skin than chlorpyrifos for all vehicles (IPA, isopropyl myristate (IPM) and PG). Significant reduction in absorption was observed when decontaminating clothed skin at 30 min, compared with decontamination at 24 h (post-exposure) for all vehicles. indicate that 'every-day' clothing is effective at reducing exposure to chemicals in contact with skin. Washing the skin surface immediately following removal of exposed clothing can further reduce exposure, depending on the properties of the chemical and vehicle applied. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Noncontact Monitoring of Respiration by Dynamic Air-Pressure Sensor.

PubMed

Takarada, Tohru; Asada, Tetsunosuke; Sumi, Yoshihisa; Higuchi, Yoshinori

2015-01-01

We have previously reported that a dynamic air-pressure sensor system allows respiratory status to be visually monitored for patients in minimally clothed condition. The dynamic air-pressure sensor measures vital information using changes in air pressure. To utilize this device in the field, we must clarify the influence of clothing conditions on measurement. The present study evaluated use of the dynamic air-pressure sensor system as a respiratory monitor that can reliably detect change in breathing patterns irrespective of clothing. Twelve healthy volunteers reclined on a dental chair positioned horizontally with the sensor pad for measuring air-pressure signals corresponding to respiration placed on the seat back of the dental chair in the central lumbar region. Respiratory measurements were taken under 2 conditions: (a) thinly clothed (subject lying directly on the sensor pad); and (b) thickly clothed (subject lying on the sensor pad covered with a pressure-reducing sheet). Air-pressure signals were recorded and time integration values for air pressure during each expiration were calculated. This information was compared with expiratory tidal volume measured simultaneously by a respirometer connected to the subject via face mask. The dynamic air-pressure sensor was able to receive the signal corresponding to respiration regardless of clothing conditions. A strong correlation was identified between expiratory tidal volume and time integration values for air pressure during each expiration for all subjects under both clothing conditions (0.840-0.988 for the thinly clothed condition and 0.867-0.992 for the thickly clothed condition). These results show that the dynamic air-pressure sensor is useful for monitoring respiratory physiology irrespective of clothing.

An investigation into the presence of petrol on the clothing and shoes of members of the public.

PubMed

Coulson, Sally; Morgan-Smith, Rian; Mitchell, Susan; McBriar, Todd

2008-02-25

First, the clothing and shoes from 29 participants who had recently filled their vehicles with petrol were analysed for any traces of petrol. No traces of petrol were found on any of these items. Secondly, the clothing and shoes from 17 participants who had recently used a petrol-powered lawn mower were also analysed for petrol. Petrol was detected on two pairs of shoes from different participants. Components of petrol were detected on a set of clothing from a third participant, however, there were insufficient components present in this sample to confirm the presence of petrol. No traces of petrol were found on the items from the remaining 14 participants. Thirdly, the clothing from a forecourt attendant, a mechanic and a professional lawn mower were analysed at the end of a number of shifts. Petrol was detected on the upper and lower clothing from the forecourt attendant at the end of one shift. No petrol residues were found on the forecourt attendant after a second shift, or on the mechanic's clothing after two separate shifts or on the professional lawn mower's clothing after three separate shifts. These results can be used to assist the forensic analyst in assessing the chance of finding traces of petrol on clothing and shoes after the wearer has performed common activities that involve petrol.

"I Am Only Ten Years Old": Femininities, Clothing-Fashion Codes and the Intergenerational Gap of Interpretation of Young Girls' Clothes

ERIC Educational Resources Information Center

Rysst, Mari

2010-01-01

Based in experience-near anthropology, this article explores constructions of gender by 10-year-old Norwegian girls who are informed by a developmental discourse and by new clothing-fashion codes. The analysis reveals gaps in aesthetic understanding between the clothing-fashion industry, preteen girls and older generations. The industry seems to…

16 CFR Appendix F2 to Part 305 - Compact Clothes Washers

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Compact Clothes Washers F2 Appendix F2 to... LABELING RULEâ) Pt. 305, App. F2 Appendix F2 to Part 305—Compact Clothes Washers Range Information “Compact” includes all household clothes washers with a tub capacity of less than 1.6 cu. ft. Capacity Range of...

16 CFR Appendix F1 to Part 305 - Standard Clothes Washers

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Standard Clothes Washers F1 Appendix F1 to... LABELING RULEâ) Pt. 305, App. F1 Appendix F1 to Part 305—Standard Clothes Washers Range Information “Standard” includes all household clothes washers with a tub capacity of 1.6 cu. ft. or more. Capacity Range...

Economic Value of Dispensing Home-Based Preoperative Chlorhexidine Bathing Cloths to Prevent Surgical Site Infection

PubMed Central

Bailey, Rachel R.; Stuckey, Dianna R.; Norman, Bryan A.; Duggan, Andrew P.; Bacon, Kristina M.; Connor, Diana L.; Lee, Ingi; Muder, Robert R.; Lee, Bruce Y.

2012-01-01

OBJECTIVE To estimate the economic value of dispensing preoperative home-based chlorhexidine bathing cloth kits to orthopedic patients to prevent surgical site infection (SSI). METHODS A stochastic decision-analytic computer simulation model was developed from the hospital’s perspective depicting the decision of whether to dispense the kits preoperatively to orthopedic patients. We varied patient age, cloth cost, SSI-attributable excess length of stay, cost per bed-day, patient compliance with the regimen, and cloth antimicrobial efficacy to determine which variables were the most significant drivers of the model’s outcomes. RESULTS When all other variables remained at baseline and cloth efficacy was at least 50%, patient compliance only had to be half of baseline (baseline mean, 15.3%; range, 8.23%–20.0%) for chlorhexidine cloths to remain the dominant strategy (ie, less costly and providing better health outcomes). When cloth efficacy fell to 10%, 1.5 times the baseline bathing compliance also afforded dominance of the preoperative bath. CONCLUSIONS The results of our study favor the routine distribution of bathing kits. Even with low patient compliance and cloth efficacy values, distribution of bathing kits is an economically beneficial strategy for the prevention of SSI. PMID:21515977

Unexpected behavioural consequences of preterm newborns' clothing.

PubMed

Durier, Virginie; Henry, Séverine; Martin, Emmanuelle; Dollion, Nicolas; Hausberger, Martine; Sizun, Jacques

2015-03-17

Restrictions of preterm newborns' movements could have consequences ranging from stress enhancement to impairment of their motor development. Therefore, ability to freely express motor activities appears crucial for their behavioural and physiological development. Our aim was to evaluate behavioural issues of two types of clothing used in NICU. We observed 18 healthy 34-37 post-conception week-old preterm newborns, during resting periods, when they were undisturbed by any interventions. Newborns wore either light clothing (bodysuit and a light wrapping) or heavy clothing (pyjamas, cardigan and sleep-sack). The percentages of time each subject spent in different postures were compared between clothing situations. Arm and hand postures differed in relation to clothing: babies bent their arms more and held their hands nearer their heads when in bodysuits than when in sleepwear. Consequently, babies in bodysuits spent more time touching their body or their environment whereas the others generally were touching nothing. Self-touch is an important way to comfort one's self. Heavy clothing may impair self-soothing behaviours of preterm newborn babies that already lack other forms of contact. Results suggest that more attention should be paid to apparently routine and marginal decisions such as choice of clothes.

Influence of work clothing on physiological responses and performance during treadmill exercise and the Wildland Firefighter Pack Test.

PubMed

Phillips, Devin B; Ehnes, Cameron M; Welch, Bradley G; Lee, Lauren N; Simin, Irina; Petersen, Stewart R

2018-04-01

This study investigated physiological responses and performance during three separate exercise challenges (Parts I, II, and III) with wildland firefighting work clothing ensemble (boots and coveralls) and a 20.4 kg backpack in four conditions: U-EX (no pack, exercise clothing); L-EX (pack, exercise clothing); U-W (no pack, work clothing); and, L-W (pack and work clothing). Part I consisted of randomly-ordered graded exercise tests, on separate days, in U-EX, L-EX and L-W conditions. Part II consisted of randomly-ordered bouts of sub-maximal treadmill exercise in the four conditions. In Part III, subjects completed, in random-order on separate days, 4.83 km Pack Tests in L-EX or L-W conditions. In Part I, peak oxygen uptake was reduced (p < .05) in L-W. In Part II, mass-specific oxygen uptake was significantly higher in both work clothing conditions. In Part III, Pack Test time was slower (p < .05) in L-W. These results demonstrate the negative impact of work clothing and load carriage on physiological responses to exercise and performance. Copyright © 2017 Elsevier Ltd. All rights reserved.

Unexpected behavioural consequences of preterm newborns' clothing

PubMed Central

Durier, Virginie; Henry, Séverine; Martin, Emmanuelle; Dollion, Nicolas; Hausberger, Martine; Sizun, Jacques

2015-01-01

Restrictions of preterm newborns' movements could have consequences ranging from stress enhancement to impairment of their motor development. Therefore, ability to freely express motor activities appears crucial for their behavioural and physiological development. Our aim was to evaluate behavioural issues of two types of clothing used in NICU. We observed 18 healthy 34–37 post-conception week-old preterm newborns, during resting periods, when they were undisturbed by any interventions. Newborns wore either light clothing (bodysuit and a light wrapping) or heavy clothing (pyjamas, cardigan and sleep-sack). The percentages of time each subject spent in different postures were compared between clothing situations. Arm and hand postures differed in relation to clothing: babies bent their arms more and held their hands nearer their heads when in bodysuits than when in sleepwear. Consequently, babies in bodysuits spent more time touching their body or their environment whereas the others generally were touching nothing. Self-touch is an important way to comfort one's self. Heavy clothing may impair self-soothing behaviours of preterm newborn babies that already lack other forms of contact. Results suggest that more attention should be paid to apparently routine and marginal decisions such as choice of clothes. PMID:25776252

Agnosia Interferes With Daily Hygiene in Patients With Dementia

PubMed Central

Hamdy, R. C.; Kinser, A.; Culp, J.E.; Kendall-Wilson, T.; Depelteau, A.; Copeland, R.; Whalen, K.

2018-01-01

Patients with dementia, particularly Alzheimer’s disease, may not recognize that their clothes are dirty. They may see the food stains and discoloration of the clothes and yet because of their agnosia are unable to integrate these observations and deduce that their clothes are dirty and need to be changed. They will, therefore, resist attempts to get them to change clothes, especially if these clothes happen to be their favorite ones. This often causes caregivers to become frustrated, especially, if it represents a change in the patient’s previous habits of only wearing clean clothes. In this case study, we present a 72-year-old woman with moderate Alzheimer’s disease who lives with her daughter, who adamantly refuses to change the clothes she has been wearing for a few days and which are now clearly dirty. We report the interaction, highlight what went wrong in the patient–daughter interaction, and discuss how the catastrophic ending could have been avoided or averted. PMID:29900188

The effect of women's suggestive clothing on men's behavior and judgment: a field study.

PubMed

Guéguen, Nicolas

2011-10-01

Numerous studies have shown that men overestimate the sexual intent of women based on their clothing style; however, this hypothesis has not been assessed empirically in a natural setting. This small field study measured the time it took for men to approach two female confederates sitting in a tavern, one wearing suggestive clothes and one wearing more conservative clothes. The behavior of 108 men was observed over 54 periods on 16 different nights in two different taverns. The time it took for the men to approach after initial eye contact was significantly shorter in the suggestive clothing condition. The men were also asked by male confederates to rate the likelihood of having a date with the women, and having sex on the first date. The men rated their chances to have a date and to have sex significantly higher in the suggestive clothing condition. Results are discussed with respect to men's possible misinterpretation that women's clothing indicates sexual interest, and the risks associated with the misinterpretation.

The UTCI-clothing model.

PubMed

Havenith, George; Fiala, Dusan; Błazejczyk, Krzysztof; Richards, Mark; Bröde, Peter; Holmér, Ingvar; Rintamaki, Hannu; Benshabat, Yael; Jendritzky, Gerd

2012-05-01

The Universal Thermal Climate Index (UTCI) was conceived as a thermal index covering the whole climate range from heat to cold. This would be impossible without considering clothing as the interface between the person (here, the physiological model of thermoregulation) and the environment. It was decided to develop a clothing model for this application in which the following three factors were considered: (1) typical dressing behaviour in different temperatures, as observed in the field, resulting in a model of the distribution of clothing over the different body segments in relation to the ambient temperature, (2) the changes in clothing insulation and vapour resistance caused by wind and body movement, and (3) the change in wind speed in relation to the height above ground. The outcome was a clothing model that defines in detail the effective clothing insulation and vapour resistance for each of the thermo-physiological model's body segments over a wide range of climatic conditions. This paper details this model's conception and documents its definitions.

Thermal response properties of protective clothing fabrics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baitinger, W.F.

1995-12-31

In the industrial workplace, it becomes increasingly incumbent upon employers to require employees to use suitable protective equipment and to wear protective apparel. When workers may be subjected to accidental radiant, flame, or electric arc heat sources, work clothing should be used that does not become involved in burning. It is axiomatic that work clothing should not become a primary fuel source, adding to the level of heat exposure, since clothing is usually in intimate contact with the skin. Further, clothing should provide sufficient insulation to protect the skin from severe burn injury. If the worker receives such protection frommore » clothing, action then may be taken to escape the confronted thermal hazard. Published laboratory test methods are used to measure flame resistance and thermal responses of flame resistant fabrics in protective clothing. The purpose of this article is to review these test methods, to discuss certain limitations in application, and to suggest how flame resistant cotton fabrics may be used to enhance worker safety.« less

[Research and design for optimal position of electrocardio-electrodes in monitoring clothing for men].

PubMed

Liang, Lijun; Hu, Yao; Liu, Hao; Li, Xiaojiu; Li, Jin; He, Yin

2017-04-01

In order to reduce the mortality rate of cardiovascular disease patients effectively, improve the electrocardiogram (ECG) accuracy of signal acquisition, and reduce the influence of motion artifacts caused by the electrodes in inappropriate location in the clothing for ECG measurement, we in this article present a research on the optimum place of ECG electrodes in male clothing using three-lead monitoring methods. In the 3-lead ECG monitoring clothing for men we selected test points. Comparing the ECG and power spectrum analysis of the acquired ECG signal quality of each group of points, we determined the best location of ECG electrodes in the male monitoring clothing. The electrode motion artifacts caused by improper location had been significantly improved when electrodes were put in the best position of the clothing for men. The position of electrodes is crucial for ECG monitoring clothing. The stability of the acquired ECG signal could be improved significantly when electrodes are put at optimal locations.

DNA extraction and amplification from contemporary Polynesian bark-cloth.

PubMed

Moncada, Ximena; Payacán, Claudia; Arriaza, Francisco; Lobos, Sergio; Seelenfreund, Daniela; Seelenfreund, Andrea

2013-01-01

Paper mulberry has been used for thousands of years in Asia and Oceania for making paper and bark-cloth, respectively. Museums around the world hold valuable collections of Polynesian bark-cloth. Genetic analysis of the plant fibers from which the textiles were made may answer a number of questions of interest related to provenance, authenticity or species used in the manufacture of these textiles. Recovery of nucleic acids from paper mulberry bark-cloth has not been reported before. We describe a simple method for the extraction of PCR-amplifiable DNA from small samples of contemporary Polynesian bark-cloth (tapa) using two types of nuclear markers. We report the amplification of about 300 bp sequences of the ITS1 region and of a microsatellite marker. Sufficient DNA was retrieved from all bark-cloth samples to permit successful PCR amplification. This method shows a means of obtaining useful genetic information from modern bark-cloth samples and opens perspectives for the analyses of small fragments derived from ethnographic materials.

DNA Extraction and Amplification from Contemporary Polynesian Bark-Cloth

PubMed Central

Moncada, Ximena; Payacán, Claudia; Arriaza, Francisco; Lobos, Sergio; Seelenfreund, Daniela; Seelenfreund, Andrea

2013-01-01

Background Paper mulberry has been used for thousands of years in Asia and Oceania for making paper and bark-cloth, respectively. Museums around the world hold valuable collections of Polynesian bark-cloth. Genetic analysis of the plant fibers from which the textiles were made may answer a number of questions of interest related to provenance, authenticity or species used in the manufacture of these textiles. Recovery of nucleic acids from paper mulberry bark-cloth has not been reported before. Methodology We describe a simple method for the extraction of PCR-amplifiable DNA from small samples of contemporary Polynesian bark-cloth (tapa) using two types of nuclear markers. We report the amplification of about 300 bp sequences of the ITS1 region and of a microsatellite marker. Conclusions Sufficient DNA was retrieved from all bark-cloth samples to permit successful PCR amplification. This method shows a means of obtaining useful genetic information from modern bark-cloth samples and opens perspectives for the analyses of small fragments derived from ethnographic materials. PMID:23437166

Energy cost of wearing chemical protective clothing during progressive treadmill walking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patton, J.F.; Bidwell, T.E.; Murphy, M.M.

1995-03-01

While chemical protective (CP) clothing is known to adversely affect physical performance, few data exist regarding the physiological response of wearing US military cp clothing during incremental, dynamic exercise. To quantify the effects of CP clothing on energy cost and to test the hypothesis that the mask contributes little to this effect, oxygen uptake (vo2) and ventilation (VE) were determined in 14 male soldiers who walked on a treadmill at 1.56 m -5(-1) for 20 min each at 0, 5, and 10% grades in three clothing conditions: BDU (battledress uniform only).

46 CFR 160.048-3 - Materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... coated upholstery cloth meeting the minimum requirements set forth in paragraphs (d) (1) and (2) of this.... (2) Coated upholstery cloth. Coated upholstery cloth shall comply with the requirements of Federal...

46 CFR 160.048-3 - Materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... coated upholstery cloth meeting the minimum requirements set forth in paragraphs (d) (1) and (2) of this.... (2) Coated upholstery cloth. Coated upholstery cloth shall comply with the requirements of Federal...

46 CFR 160.048-3 - Materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... coated upholstery cloth meeting the minimum requirements set forth in paragraphs (d) (1) and (2) of this.... (2) Coated upholstery cloth. Coated upholstery cloth shall comply with the requirements of Federal...

46 CFR 160.048-3 - Materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... coated upholstery cloth meeting the minimum requirements set forth in paragraphs (d) (1) and (2) of this.... (2) Coated upholstery cloth. Coated upholstery cloth shall comply with the requirements of Federal...

Biogeochemical flux and phytoplankton succession: A year-long sediment trap record in the Australian sector of the Subantarctic Zone

NASA Astrophysics Data System (ADS)

Wilks, Jessica V.; Rigual-Hernández, Andrés S.; Trull, Thomas W.; Bray, Stephen G.; Flores, José-Abel; Armand, Leanne K.

2017-03-01

The Subantarctic Zone (SAZ) plays a crucial role in global carbon cycling as a significant sink for atmospheric CO2. In the Australian sector, the SAZ exports large quantities of organic carbon from the surface ocean, despite lower algal biomass accumulation in surface waters than other Southern Ocean sectors. We present the first analysis of diatom and coccolithophore assemblages and seasonality, as well as the first annual quantification of bulk organic components of captured material at the base of the mixed layer (500 m depth) in the SAZ. Sediment traps were moored in the SAZ southwest of Tasmania as part of the long-term SAZ Project for one year (September 2003 to September 2004). Annual mass flux at 500 m and 2000 m was composed mainly of calcium carbonate, while biogenic silica made up on average <10% of material captured in the traps. Organic carbon flux was estimated at 1.1 g m-2 y-1 at 500 m, close to the estimated global mean carbon flux. Low diatom fluxes and high fluxes of coccoliths were consistent with low biogenic silica and high calcium carbonate fluxes, respectively. Diatoms and coccoliths were identified to species level. Diatom and coccolithophore sinking assemblages reflected some seasonal ecological succession. A theoretical scheme of diatom succession in live assemblages is compared to successional patterns presented in sediment traps. This study provides a unique, direct measurement of the biogeochemical fluxes and their main biological carbon vectors just below the winter mixed layer depth at which effective sequestration of carbon occurs. Comparison of these results with previous sediment trap deployments at the same site at deeper depths (i.e. 1000, 2000 and 3800 m) documents the changes particle fluxes experience in the lower "twilight zone" where biological processes and remineralisation of carbon reduce the efficiency of carbon sequestration.

A Stratigraphic Pollen Record from a Late Pleistocene Cypress Forest, Northern Gulf of Mexico Continental Shelf

NASA Astrophysics Data System (ADS)

Reese, A.; Harley, G. L.; DeLong, K. L.; Bentley, S. J.; Xu, K.; Gonzalez Rodriguez, S. M.; Truong, J. T.; Obelcz, J.; Caporaso, A.

2017-12-01

Stratigraphic pollen analysis was performed on a layer of preserved peat found near the bottom of a 4.75m vibracore taken in 18m of water off the coast of Orange Beach, Alabama. The core was taken from a site where the remains of a previously buried bald cypress (Taxodium distichum) forest was discovered after wave action, likely from Hurricane Ivan in 2004, scoured and removed the overlying Holocene/late Pleistocene sand sheet. Many of the cypress stumps found at the site are still in growth position, and rooted in the preserved terrestrial soils below. Radiocarbon dating of the peat recovered in core DF1 suggests that the sediment is likely Marine Isotope Stage 3 (MIS 3), or earlier. We hypothesize that the site was quickly buried and preserved by floodplain aggradation associated with sea-level rise that occurred near the end of MIS 3. This rare find provides an opportunity to study in situ fossil pollen from a glacial refugium in the Northern Gulf of Mexico. Pollen results from the lowermost sections within the peat layer show an assemblage consistent with a bald cypress/tupelo gum (Nyssa aquatica) backwater. This is eventually replaced by a more open, possibly brackish, environment, dominated by grasses (Poaceae) and sedges (Cyperaceae). During this change however, there is a brief but very interesting period where the pollen assemblage is likely analogous to the modern day Atlantic Coastal Plain Blackwater Levee/Bar Forests of North and South Carolina. In this modern assemblage, as well as the core samples, birch (Betula), oak (Quercus) and bald cypress are the dominant taxa, along with a strong presence of alder (Alnus), grasses and sedges. We hypothesize that these bar forests formed on areas of higher ground, which resulted from floodplain aggradation that accompanied sea level rise at the end of MIS 3.

30 CFR 75.1720 - Protective clothing; requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the active workings of an underground coal mine shall be required to wear the following protective clothing and devices: (a) Protective clothing or equipment and face-shields or goggles when welding...

30 CFR 75.1720 - Protective clothing; requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the active workings of an underground coal mine shall be required to wear the following protective clothing and devices: (a) Protective clothing or equipment and face-shields or goggles when welding...

30 CFR 75.1720 - Protective clothing; requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the active workings of an underground coal mine shall be required to wear the following protective clothing and devices: (a) Protective clothing or equipment and face-shields or goggles when welding...

30 CFR 75.1720 - Protective clothing; requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the active workings of an underground coal mine shall be required to wear the following protective clothing and devices: (a) Protective clothing or equipment and face-shields or goggles when welding...

30 CFR 75.1720 - Protective clothing; requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the active workings of an underground coal mine shall be required to wear the following protective clothing and devices: (a) Protective clothing or equipment and face-shields or goggles when welding...

Atopic dermatitis - children - homecare

MedlinePlus

... your child in soft, comfortable clothing, such as cotton clothes. Have your child drink plenty of water. ... Use smooth, textured clothing and bedding, such as cotton. Sweating. Be careful not to over dress your ...

Classroom Temperature, Clothing and Thermal Comfort -- A Study of Secondary School Children in Summertime. Building Research Establishment Current Paper 22/74.

ERIC Educational Resources Information Center

Humphreys, M. A.

1974-01-01

This article describes a study of summertime classroom temperature and its relationship to the clothing worn by English secondary school children. Data on classroom temperatures and children's clothing were recorded during one summer for a total of 987 lessons. Analysis of the data showed that the strong clothing-temperature correlation could be…

Cold Regions - Environmental Testing of Individual Soldier Clothing

DTIC Science & Technology

2011-10-17

Individual Soldier Clothing 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHORS 5d. PROJECT NUMBER 5e. TASK...This Test Operations Procedure (TOP) provides testing guidelines for individual Soldier cold weather clothing and footwear in a cold regions...Soldier clothing , along with its safety, reliability, durability, and performance when exposed to a cold regions environment. 15. SUBJECT TERMS

Thermal insulation and clothing area factors of typical Arabian Gulf clothing ensembles for males and females: measurements using thermal manikins.

PubMed

Al-ajmi, F F; Loveday, D L; Bedwell, K H; Havenith, G

2008-05-01

The thermal insulation of clothing is one of the most important parameters used in the thermal comfort model adopted by the International Standards Organisation (ISO) [BS EN ISO 7730, 2005. Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. International Standardisation Organisation, Geneva.] and by ASHRAE [ASHRAE Handbook, 2005. Fundamentals. Chapter 8. American Society of Heating Refrigeration and Air-conditioning Engineers, Inc., 1791 Tullie Circle N.E., Atlanta, GA.]. To date, thermal insulation values of mainly Western clothing have been published with only minimal data being available for non-Western clothing. Thus, the objective of the present study is to measure and present the thermal insulation (clo) values of a number of Arabian Gulf garments as worn by males and females. The clothing ensembles and garments of Arabian Gulf males and females presented in this study are representative of those typically worn in the region during both summer and winter seasons. Measurements of total thermal insulation values (clo) were obtained using a male and a female shape thermal manikin in accordance with the definition of insulation as given in ISO 9920. In addition, the clothing area factors (f cl) determined in two different ways were compared. The first method used a photographic technique and the second a regression equation as proposed in ISO 9920, based on the insulation values of Arabian Gulf male and female garments and ensembles as they were determined in this study. In addition, fibre content, descriptions and weights of Arabian Gulf clothing have been recorded and tabulated in this study. The findings of this study are presented as additions to the existing knowledge base of clothing insulation, and provide for the first time data for Arabian Gulf clothing. The analysis showed that for these non-Western clothing designs, the most widely used regression calculation of f cl is not valid. However, despite the very large errors in f cl made with the regression method, the errors this causes in the intrinsic clothing insulation value, I cl, are limited.

Ethnicity, Clothing Style, and Body Mass Index are Significant Predictors of Vitamin D Insufficiency in Germany.

PubMed

Farahati, Jamshid; Nagarajah, James; Gilman, Elena; Mahjoob, Soha; Zohreh, Moussavi; Rosenbaum-Krumme, Sandra; Bockisch, Andreas; Zakavi, S Rasoul

2015-02-01

To analyze risk factors for vitamin D insufficiency in Germany with respect to ethnicity, sex, and clothing style. We analyzed the routine diagnostic work-ups of 1,231 adult (45.9 ± 17.9 years old) German (n = 1,034) and Turk residents (n = 197) referred with nonspecific symptoms to the Thyroid Centers at St. Elisabeth-Hospital in Dorsten, Germany and Bottrop, Germany to assess for metabolic diseases. All subjects underwent a routine examination that consisted of a questionnaire, lab tests for 25-hydroxyvitamin-D (25OHD), and thyroid profile. Turk females with traditional clothing (headscarf and covered legs and arms) were considered to wear "covered clothing." Logistic-regression was performed to identify factors that could predict vitamin D deficiency (<20 ng/mL) and insufficiency (20-30 ng/mL). Vitamin D insufficiency was seen in 33% of Germans and 74.1% of Turks, and vitamin D deficiency was present in 11.3% and 44.2% of Germans and Turks, respectively (P<.001). The mean 25OHD value in Turk females with covered clothes was lower than that in Turk females with conventional clothing (16.3 ± 12.3 vs. 27.2 ± 15.8, P<.001). Vitamin D insufficiency was present in 86.0% of Turk females with covered clothing versus 62.8% with conventional clothing (odds ratio [OR] = 3.6, P = .002). Ethnicity, body mass index (BMI), and clothing style were significant predictors of vitamin D deficiency and insufficiency by logistic regression (P<.001). (1) Vitamin D insufficiency among Turk residents in Germany is higher compared to Germans. The highest prevalence was present in Turk females with covered clothing. (2) Monitoring vitamin D in Turk residents in Germany is warranted. (3) Vitamin D supplements and access to facilities with sunlight exposure for females with covered clothing and all individuals with poor diets or limited access to sun exposure may prevent future health burden due to vitamin D insufficiency.

Thermal clothing to reduce heart failure morbidity during winter: a randomised controlled trial

PubMed Central

Stewart, Ian; Beevers, Andrea; Fraser, John F; Platts, David

2017-01-01

Objective To examine whether providing thermal clothing improved the health of patients with heart failure during winter. Design Parallel group randomised controlled trial. Setting Large public hospital in Brisbane during winter 2016. Participants 91 patients with systolic or diastolic heart failure who were over 50 years old. Intervention 47 patients were randomised to receive thermal clothes (socks, top and hat) and 44 received usual care. Patients could not be blinded to their randomised group. All patients’ data were available for the primary outcome which was collected blind to randomised group. Main outcome measures The primary outcome was the mean number of days in hospital during winter. Secondary outcomes included quality of life and sleep, and blood tests were collected for cardiovascular risk factors. Participants completed clothing diaries in midwinter which were used to estimate their overall clothing insulation using the ‘clo’. Monitors inside the participants’ homes recorded indoor temperatures throughout winter. Results The mean number of days in hospital during winter was 4.2 in the usual care group and 3.0 in the thermal clothing group (mean difference –1.2 days, 95% CI –4.8 to 2.5 days). Most participants (85%) in the thermal clothing group reported using the thermals. There was an increase in overall clothing insulation at night in the thermal clothing group (mean difference 0.13 clo, 95% CI 0.03 to 0.23). Most participants in both groups did not wear sufficient clothing (defined as a clo below 1) and regularly experienced indoor temperatures below 18°C during midwinter. Conclusions There was no clear statistical improvement in health in the thermal clothing group. Efforts to improve health during winter may need to focus on passive interventions such as home insulation rather than interventions that target behaviour change. Trial registration number ACTRN12615001023549; Results. PMID:28993390

Thermal clothing to reduce heart failure morbidity during winter: a randomised controlled trial.

PubMed

Barnett, Adrian Gerard; Stewart, Ian; Beevers, Andrea; Fraser, John F; Platts, David

2017-10-08

To examine whether providing thermal clothing improved the health of patients with heart failure during winter. Parallel group randomised controlled trial. Large public hospital in Brisbane during winter 2016. 91 patients with systolic or diastolic heart failure who were over 50 years old. 47 patients were randomised to receive thermal clothes (socks, top and hat) and 44 received usual care. Patients could not be blinded to their randomised group. All patients' data were available for the primary outcome which was collected blind to randomised group. The primary outcome was the mean number of days in hospital during winter. Secondary outcomes included quality of life and sleep, and blood tests were collected for cardiovascular risk factors. Participants completed clothing diaries in midwinter which were used to estimate their overall clothing insulation using the 'clo'. Monitors inside the participants' homes recorded indoor temperatures throughout winter. The mean number of days in hospital during winter was 4.2 in the usual care group and 3.0 in the thermal clothing group (mean difference -1.2 days, 95% CI -4.8 to 2.5 days). Most participants (85%) in the thermal clothing group reported using the thermals. There was an increase in overall clothing insulation at night in the thermal clothing group (mean difference 0.13 clo, 95% CI 0.03 to 0.23). Most participants in both groups did not wear sufficient clothing (defined as a clo below 1) and regularly experienced indoor temperatures below 18°C during midwinter. There was no clear statistical improvement in health in the thermal clothing group. Efforts to improve health during winter may need to focus on passive interventions such as home insulation rather than interventions that target behaviour change. ACTRN12615001023549; Results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Chemical agent simulant release from clothing following vapor exposure.

PubMed

Feldman, Robert J

2010-02-01

Most ambulatory victims of a terrorist chemical attack will have exposure to vapor only. The study objective was to measure the duration of chemical vapor release from various types of clothing. A chemical agent was simulated using methyl salicylate (MeS), which has similar physical properties to sulfur mustard and was the agent used in the U.S. Army's Man-In-Simulant Test (MIST). Vapor concentration was measured with a Smiths Detection Advanced Portable Detector (APD)-2000 unit. The clothing items were exposed to vapor for 1 hour in a sealed cabinet; vapor concentration was measured at the start and end of each exposure. Clothing was then removed and assessed every 5 minutes with the APD-2000, using a uniform sweep pattern, until readings remained 0. Concentration and duration of vapor release from clothing varied with clothing composition and construction. Lightweight cotton shirts and jeans had the least trapped vapor; down outerwear, the most. Vapor concentration near the clothing often increased for several minutes after the clothing was removed from the contaminated environment. Compression of thick outerwear released additional vapor. Mean times to reach 0 ranged from 7 minutes for jeans to 42 minutes for down jackets. This simulation model of chemical vapor release demonstrates persistent presence of simulant vapor over time. This implies that chemical vapor may be released from the victims' clothing after they are evacuated from the site of exposure, resulting in additional exposure of victims and emergency responders. Insulated outerwear can release additional vapor when handled. If a patient has just moved to a vapor screening point, immediate assessment before additional vapor can be released from the clothing can lead to a false-negative assessment of contamination.

Transition phase clothing strategies and their effect on body temperature and 100-m swimming performance.

PubMed

Galbraith, Andy; Willmott, Aimee

2018-03-01

Effective warm-ups are attributed to several temperature-related mechanisms. Strategies during the transition phase, preceding swimming competition, have been shown to prolong temperature-related warm-up effects. The purpose of this study was to evaluate the effects of two different clothing strategies during the transition phase, on subsequent 100-m maximal swimming performance. Nine competitive swimmers (3 female, 21 ± 3 yrs; 6 male 20 ± 2 yrs, mean performance standard 702 FINA Points, mean 100-m seasons best time 61.54 s) completed their own 30-min individual pool warm-up, followed by 7-min changing time and a 30-min transition phase, straight into a 100-m maximal effort time-trial. During the transition phase, swimmers remained seated, either wearing warm or limited clothing. Swimmers returned 1 week later, where clothing conditions were alternated. Post-transition phase skin and core temperature remained higher in the warm clothing condition compared to the limited clothing condition (Mean Core: 36.90 ± 0.17°C, 36.61 ± 0.15°C, P < .01; Mean Skin: 33.49 ± 0.59°C, 31.94 ± 0.59°C, P < .01). One hundred-metre finish times were 0.6% faster in the warm clothing condition compared to the limited clothing condition (62.63 ± 7.69 s, 63.00 ± 7.75 s, P < .01). Wearing warm clothing during a 30-min transition phase improved swimming performance by 0.6%, compared to limited clothing.

Impacts of gender, weather, and workplace differences in farm worker's gear.

PubMed

Kwon, JuYoun; Park, Hee Sok; Kim, Sun-Hwa; Lee, Kyung-Suk

2015-11-09

The farmers cannot help working in outdoor conditions which have high humidity and solar radiation during the harvest period. Wearable items including clothing are the nearest environment of human body, and to understand the current state of them can be a way to set up an active prevention strategy against the health risk from heat stress in summertime agriculture. The aim of this study was to investigate the work wear and accessories which the elderly farmers used during agricultural working. One hundred twenty farmers (49 males and 71 females) working in nine separate sites on different days took part in this study. The average age of subjects was 61 years old. We examined the types of working posture, clothing, and items that the farmers used and/or wore. We also interviewed the farmers to know why they used such items while working. The results of this study were as follows: (1) Farmers worked in the thermal environment which was over wet bulb globe temperature (WBGT) reference value, and the farmers could suffer heat stress due to workload induced from wearing conventional long-sleeved shirts and long trousers which were 0.66 clo in average under this summertime working thermal condition. (2) The farmers tended to change the layer of upper clothing for adapting to weather condition. (3) The types of footwear used seemed to be related with facilities as well as weather, and farmers tended to wear lighter footwear when the weather is hotter or when they work in PVC greenhouse. The majority of elderly farmers wore loafers and rubber shoes which had indistinguishable thin soles. (4) The types of hats showed the difference between facilities as well as gender and only 31.7% of all participants used long brims. (5) Korean elderly farmers did not use any active cooling item as agricultural auxiliary tools in summer harvesting time. Korean elderly farmers worked in poor surroundings which could threaten their health and safety and seemed not to adjust their workload and clothing during summer harvest season. Thus, it would be necessary to monitor individual responses in order to ensure that the risk of heat stress is prevented.

A composite thin vacuum window for the CLAS photon tagger at Jefferson lab

NASA Astrophysics Data System (ADS)

Matthews, S. K.; Crannell, Hall; O'Brien, J. T.; Sober, D. I.

1999-01-01

The construction of a thin vacuum window, currently in use on the CLAS photon tagging system at the Thomas Jefferson National Accelerator Facility, is described. A layer of woven Kevlar cloth supports a much thinner membrane of aluminized Mylar. Notable features of this particular window include its overall length (9.6 m), and the fact that the entire load is supported by the epoxy seal with no mechanical clamping around the edges. Results from a diverse program of materials testing, including a clear dependence of leak rate on relative humidity, are also reported.

Sandwich Structure Risk Reduction in Support of the Payload Adapter Fitting

NASA Technical Reports Server (NTRS)

Nettles, A. T.; Jackson, J. R.; Guin, W. E.

2018-01-01

Reducing risk for utilizing honeycomb sandwich structure for the Space Launch System payload adapter fitting includes determining what parameters need to be tested for damage tolerance to ensure a safe structure. Specimen size and boundary conditions are the most practical parameters to use in damage tolerance inspection. The effect of impact over core splices and foreign object debris between the facesheet and core is assessed. Effects of enhanced damage tolerance by applying an outer layer of carbon fiber woven cloth is examined. A simple repair technique for barely visible impact damage that restores all compression strength is presented.

Interface Properties and Surface Leakage of HgCdTe Photodiodes.

DTIC Science & Technology

1980-01-01

these techniques, we found that (a) the com- position of a 1200 )anodic film is 68% TeO2 , 27% CdO, and 6% HgO, and (b) the cations, especially the Hg...of TeO2 (Fig. 1); (b) irradiation with an electron beam of a few keV energy can convert the surface layer (10-100 1) of (Rg,Cd)Te into CdTe (Fig. 2...remove the scratches. The polishing cloth was secured to a glass olishing disk which is not affected by the corrosive nature of the etch - a 5

Repellent-Treated Clothing

EPA Pesticide Factsheets

EPA regulates the pesticide permethrin to pre-treat clothing. We evaluate the safety and effectiveness of such insecticide uses, by exposure scenarios and risk assessment. Read and follow the label directions for use of permethrin-treated clothing.

Allergies to Insect Venom

MedlinePlus

... colored clothing. Dark clothing and clothing with flowery designs is more likely to attract insects.  Use unscented ... keep insecticide available. Treatment tips:  Venom immunotherapy (allergy shots to insect venom(s) is highly effective in preventing ...

One to One Recommendation System in Apparel On-Line Shopping

NASA Astrophysics Data System (ADS)

Sekozawa, Teruji; Mitsuhashi, Hiroyuki; Ozawa, Yukio

We propose an apparel online shopping site that the fashion adviser exists on the internet. The fashion adviser, who has detailed knowledge about the fashion in real shop, selects and coordinates the clothes of the customer's preference. However, the customer, who didn't have detailed knowledge about the fashion, was not able to choose the clothes suitable for the customer's preference from among the candidate of a large amount of clothes on a conventional apparel shopping site. Then, we compose the system that analyzes the customer's preference by the AHP technique, makes to the cluster by the correlation of clothes, and analyzes the market basket. As a result, this system can coordinate the clothes appropriate for the favor of an individual customer. Moreover, this system can propose the recommendation of other clothes based on past sales data.

The effects of clothes on independent walking in toddlers.

PubMed

Théveniau, Nicolas; Boisgontier, Matthieu P; Varieras, Sabine; Olivier, Isabelle

2014-01-01

The spatiotemporal features of walking in toddlers are known to be related to the level of maturation of the central nervous system. However, previous studies did not assess whether there could be an effect of clothes on the acquisition of walking. In this study, it was hypothesized that clothes modify the toddlers' walking. To test this hypothesis, 22 healthy toddlers divided into 3 groups of walking experience were assessed in four clothing conditions (Diaper+Trousers; Diaper+Pants of tracksuit; Diaper; Underwear). Results revealed significant effects of clothing on velocity and step length of toddlers from 6 to 18 months of walking experience. These results suggested that biomechanical constraints induced by the textile features alter the walking of toddlers. Therefore, in studies of toddler's gait, the clothing worn should be carefully mentioned and controlled. Copyright © 2013 Elsevier B.V. All rights reserved.

The relationship between thermal environments and clothing insulation for elderly individuals in Shanghai, China.

PubMed

Jiao, Yu; Yu, Hang; Wang, Tian; An, Yusong; Yu, Yifan

2017-12-01

The relationship between thermal environmental parameters and clothing insulation is an important element in improving thermal comfort for the elderly. A field study was conducted on the indoor, transition space, and outdoor thermal environments of 17 elderly facilities in Shanghai, China. A random questionnaire survey was used to gather data from 672 valid samples. A statistical analysis of the data was conducted, and multiple linear regression models were established to quantify the relationships between clothing insulation, respondent age, indoor air temperature, and indoor relative humidity. Results indicated that the average thermal insulation of winter and summer clothing is 1.38 clo and 0.44 clo, respectively, for elderly men and 1.39 clo and 0.45 clo, respectively, for elderly women. It was also found that the thermal insulation of winter clothing is linearly correlated with age, and that there were seasonal differences in the relationship between clothing insulation and the environment. During winter, the clothing insulation is negatively correlated only with indoor temperature parameters (air temperature and operative temperature) for elderly males, while it is negatively correlated with indoor temperature parameters as well as transition space and outdoor air temperature for elderly females. In summer, clothing insulation for both elderly males and females is negatively correlated with outdoor temperature, as well as indoor temperature parameters (air temperature and operative temperature). The thermal insulation of summer clothing is also negatively correlated with transitional space temperature for males. Copyright © 2017 Elsevier Ltd. All rights reserved.

Linking Vegetation Structure and Spider Diversity in Riparian and Adjacent Habitats in Two Rivers of Central Argentina: An Analysis at Two Conceptual Levels.

PubMed

Griotti, Mariana; Muñoz-Escobar, Christian; Ferretti, Nelson E

2017-08-01

The link between vegetation structure and spider diversity has been well explored in the literature. However, few studies have compared spider diversity and its response to vegetation at two conceptual levels: assemblage (species diversity) and ensemble (guild diversity). Because of this, we studied spider diversity in riparian and adjacent habitats of a river system from the Chacoan subregion in central Argentina and evaluated their linkage with vegetation structure at these two levels. To assess vegetation structure, we measured plant species richness and vegetation cover in the herb and shrub - tree layers. We collected spiders for over 6 months by using vacuum netting, sweep netting and pitfall traps. We collected 3,808 spiders belonging to 119 morphospecies, 24 families and 9 guilds. At spider assemblage level, SIMPROF analysis showed significant differences among studied habitats. At spider ensemble level, nevertheless, we found no significant differences among habitats. Concerning the linkage with vegetation structure, BIOENV test showed that spider diversity at either assemblage or ensemble level was not significantly correlated with the vegetation variables assessed. Our results indicated that spider diversity was not affected by vegetation structure. Hence, even though we found a pattern in spider assemblages among habitats, this could not be attributed to vegetation structure. In this study, we show that analyzing a community at two conceptual levels will be useful for recognizing different responses of spider communities to vegetation structure in diverse habitat types. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The archaeology, chronology and stratigraphy of Madjedbebe (Malakunanja II): A site in northern Australia with early occupation.

PubMed

Clarkson, Chris; Smith, Mike; Marwick, Ben; Fullagar, Richard; Wallis, Lynley A; Faulkner, Patrick; Manne, Tiina; Hayes, Elspeth; Roberts, Richard G; Jacobs, Zenobia; Carah, Xavier; Lowe, Kelsey M; Matthews, Jacqueline; Florin, S Anna

2015-06-01

Published ages of >50 ka for occupation at Madjedbebe (Malakunanja II) in Australia's north have kept the site prominent in discussions about the colonisation of Sahul. The site also contains one of the largest stone artefact assemblages in Sahul for this early period. However, the stone artefacts and other important archaeological components of the site have never been described in detail, leading to persistent doubts about its stratigraphic integrity. We report on our analysis of the stone artefacts and faunal and other materials recovered during the 1989 excavations, as well as the stratigraphy and depositional history recorded by the original excavators. We demonstrate that the technology and raw materials of the early assemblage are distinctive from those in the overlying layers. Silcrete and quartzite artefacts are common in the early assemblage, which also includes edge-ground axe fragments and ground haematite. The lower flaked stone assemblage is distinctive, comprising a mix of long convergent flakes, some radial flakes with faceted platforms, and many small thin silcrete flakes that we interpret as thinning flakes. Residue and use-wear analysis indicate occasional grinding of haematite and woodworking, as well as frequent abrading of platform edges on thinning flakes. We conclude that previous claims of extensive displacement of artefacts and post-depositional disturbance may have been overstated. The stone artefacts and stratigraphic details support previous claims for human occupation 50-60 ka and show that human occupation during this time differed from later periods. We discuss the implications of these new data for understanding the first human colonisation of Sahul. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effects of conversion of dry tropical forest to agricultural mosaic on herpetofaunal assemblages.

PubMed

Suazo-Ortuño, Ireri; Alvarado-Díaz, Javier; Martínez-Ramos, Miguel

2008-04-01

We explored the impact of forest conversion to agricultural mosaic on anuran, lizard, snake, and turtle assemblages of Neotropical dry forests. Over 2 years, we sampled 6 small watersheds on the west coast of Mexico, 3 conserved and 3 disturbed. The disturbed watersheds were characterized by a mosaic of pastures and cultivated fields (corn, beans, squash) intermingled with patches of different successional stages of dry forest. In each watershed, we conducted 11 diurnal and nocturnal time-constrained searches in 10 randomly established plots. We considered vulnerability traits of species in relation to habitat modification. Eighteen anuran, 18 lizard, 23 snake, and 3 turtle species were recorded. Thirty-six species (58%) occurred in both forest conditions, and 14 (22%) and 12 species (19%) occurred only in the conserved and disturbed sites, respectively. Assemblages responded differently to disturbance. Species richness, diversity, and abundance of lizards were higher in disturbed forests. Anuran diversity and species richness were lower in disturbed forest but abundance was similar in both forest conditions. Diversity, richness, and abundance of turtles were lower in disturbed forest. The structure and composition of snake assemblages did not differ between forest conditions. We considered species disturbance sensitive if their abundance was significantly less in disturbed areas. Four anuran (22%), 2 lizard (11%), and 3 turtle (100%) species were sensitive to disturbance. No snake species was sensitive. The decline in abundance of disturbance-sensitive species was associated with the reduction of forest canopy cover, woody stem cover, roots, and litter-layer ground cover. Anuran species with small body size and direct embryonic development were especially sensitive to forest disturbance. An important goal for the conservation of herpetofauna should be the determination of species traits associated with extinction or persistence in agricultural mosaics.

Physiological Tolerance to Uncompensable Heat Stress: Effects of Exercise Intensity, Protective Clothing, and Climate

DTIC Science & Technology

1994-01-01

Physiological tolerance to uncompensable heat stress: effects of exercise intensity, protective clothing , and climate SCOTT J. MONTAIN, MICHAEL N...effects of exercise 26), there remains little information to predict the inci- intensity, protective clothing , and climate. J. AppL PhysioL dence of...that pre- exercise intensity, protective clothing level, and climate on dict the physiological responses and work capability dur- physiological tolerance

The Effect of Drycleaning Moisture on Fused Cloth Systems

DTIC Science & Technology

1989-03-01

TECHNICAL REPORT NATICK/TR-89/024 et, THE EFFECT OF DRYCLEANING MOISTURE ON FUSED CLOTH SYSTEMS BY ELIZABETH J. MORELAND International...MOISTUP.E ON FUSED CLOTH SYSTEMS 12. PERSONAL AUTMOR(S) Elizabeth J. MorelanJ 13«. TYPE OF REPORT Final Technical Report 13b. TIME COVERED...This project was initiated to investigate the effect of moisture in drycleaning systems on preselected fused cloth structures. Adverse surface

Nontronite and Montmorillonite as Nutrient Sources for Life on Mars

NASA Technical Reports Server (NTRS)

Craig, P. I.; Mickol, R. L.; Archer, P. D.; Kral, T. A.

2017-01-01

Clay minerals have been identified on Mars' oldest (Noachian) terrain and their presence suggests long-term water-rock interactions. The most commonly identified clay minerals on Mars to date are nontronite (Fe-smectite) and montmorillonite (Al-smectite) [1], both of which contain variable amounts of water both adsorbed on their surface and within their structural layers. Over Mars' history, these clay miner-al-water assemblages may have served as nutrient sources for microbial life.

High-performance all-solid-state flexible supercapacitors based on two-step activated carbon cloth

NASA Astrophysics Data System (ADS)

Jiang, Shulan; Shi, Tielin; Zhan, Xiaobin; Long, Hu; Xi, Shuang; Hu, Hao; Tang, Zirong

2014-12-01

A simple and effective strategy is proposed to activate carbon cloth for the fabrication of flexible and high-performance supercapacitors. Firstly, the carbon cloth surface is exfoliated as nanotextures through wet chemical treatment, then an annealing process is applied at H2/N2 atmosphere to reduce the surface oxygen functional groups which are mainly introduced from the first step. The activated carbon cloth electrode shows excellent wettablity, large surface area and delivers remarkable electrochemical performance. A maximum areal capacitance of 485.64 mF cm-2 at the current density of 2 mA cm-2 is achieved for the activated carbon cloth electrode, which is considerably larger than the resported results for carbon cloth. Furthermore, the flexible all-solid-state supercapacitor, which is fabricated based on the activated carbon cloth electrodes, shows high areal capacitance, superior cycling stability as well as stable electrochemical performance even under constant bending or twisting conditions. An areal capacitance of 161.28 mF cm-2 is achieved at the current density of 12.5 mA cm-2, and 104% of its initial capacitance is retained after 30,000 charging/discharging cycles. This study would also provide an effective way to boost devices' electrochemical performance by accommodating other active materials on the activated carbon cloth.

The development of anti-heat stress clothing for construction workers in hot and humid weather.

PubMed

Chan, Albert P C; Guo, Y P; Wong, Francis K W; Li, Y; Sun, S; Han, X

2016-04-01

The purpose of this study was to develop anti-heat stress clothing for construction workers in hot and humid weather. Following DeJonge's functional clothing design process, the design situation was explored, including clothing fabric heat/moisture transporting properties and UV protection and the aspects of clothing ergonomic design (mobility, convenience, and safety). The problem structure was derived from the results of the surveys in three local construction sites, which agreed well with the task requirements and observations. Specifications were consequently described and 30 commercially available fabrics were identified and tested. Fabric testing data and design considerations were inputted in S-smart system to predict the thermal functional performance of the clothing. A new uniform prototype was developed and evaluated. The results of all measurements suggest that the new uniform which incorporated fabrics with superior heat/moisture transporting properties and loose-fitting design could reduce the workers' heat stress and improve their comfort and work performance. Practitioner Summary: The construction workers' uniform currently used in Hong Kong during summer was unsatisfactory. Following DeJonge's functional clothing design process, an anti-heat stress uniform was developed by testing 30 fabrics and predicting clothing thermal functional performance using S-smart system. The new uniform could reduce the workers' heat stress and improve their comfort and work performance.

Climatic Implications of Macro- and Microfossil Assemblages from Late Pleistocene Deposits in Northern New Zealand

NASA Astrophysics Data System (ADS)

Ogden, John; Newnham, Rewi M.; Palmer, Jonathan G.; Serra, Richard G.; Mitchell, Neil D.

1993-01-01

Twenty-two plant species were identified from leaves, fruits, or flowers, and 41 taxa from pollen, present in a macrofossil (leaf) layer in a peat swamp formed on Pleistocene dunes on the Aupouri Peninsula in northern New Zealand. Eight genera of gymnosperms are represented. With the exception of Lagarostrobos colensoi, all tree species abundant as macrofossils are also common as pollen. Macrofossils enabled the on-site flora to be compared with the regional flora, represented by the pollen rain. Studies on leaf decomposition rates indicate bias toward sclerophyllous species in the macrofossils. Identification to species level and treering data from preserved kauri logs allow quantitative comparisons with similar extant communities. Current climatic conditions at those analogue sites are cooler (2° to 3°C), cloudier (11%), and much wetter (85%) than those currently prevailing on the Aupouri Peninsula. Dendrochronological results also suggest that the far north of New Zealand had a cooler, cloudier, and wetter climate at the time the fossil leaf assemblage was formed. Radiocarbon dates from possibly contaminated samples suggest that a diverse mixed gymnosperm/angiosperm forest, dominated by kauri ( Agathis australis), was present about (or sometime before) 41,00034,000 yr B.P., when the leaf layer was formed. Similar temperature reductions have been postulated for this period in New Zealand by other authors.

Performance of a passive direct ethanol fuel cell

NASA Astrophysics Data System (ADS)

Pereira, J. P.; Falcão, D. S.; Oliveira, V. B.; Pinto, A. M. F. R.

2014-06-01

Ethanol emerges as an attractive fuel since it is less toxic and has higher energy density than methanol and can be produced from biomass. Direct ethanol fuel cells (DEFCs) appear as a good choice for producing sustainable energy for portable applications. However, they are still far from attaining acceptable levels of power output, since their performance is affected by the slow electrochemical ethanol oxidation and water and ethanol crossover. In the present work, an experimental study on the performance of a passive DEFC is described. Tailored MEAs (membrane electrode assembly) with different catalyst loadings, anode diffusion layers and membranes were tested in order to select optimal working conditions at high ethanol concentrations and low ethanol crossover. The performance increased with an increase of membrane and anode diffusion layer thicknesses and anode catalyst loading. A maximum power density of 1.33 mW cm-2, was obtained using a Nafion 117 membrane, 4 mg cm-2 of Pt-Ru and 2 mg cm-2 of Pt on the anode and cathode catalyst layers, ELAT as anode diffusion layer, carbon cloth as cathode diffusion layer and an ethanol concentration of 2 M. As far as the authors are aware this is the first work reporting an experimental optimization of passive DEFCs.

Vapor-phase polymerization of poly(3, 4-ethylenedioxythiophene) nanofibers on carbon cloth as electrodes for flexible supercapacitors.

PubMed

Zhao, Xin; Dong, Mengyang; Zhang, Junxian; Li, Yingzhi; Zhang, Qinghua

2016-09-23

In this study, an evaporative vapor-phase polymerization approach was employed to fabricate vertically aligned poly(3, 4-ethylenedioxythiophene) (PEDOT) nanofibers on the surface of carbon cloth (CC). Optimized reaction conditions can obtain well distributed and uniform layers of high-aspect-ratio PEDOT nanofibers on CC. The hierarchical PEDOT/CC structure as a freestanding electrode exhibits good electrochemical properties. As a flexible symmetric supercapacitor, the PEDOT/CC hybrid electrode displays a specific areal capacitance of 201.4 mF cm(-2) at 1 mA cm(-2), good flexibility with a higher value (204.6 mF cm(-2)) in the bending state, and a good cycling stability of 92.4% after 1000 cycles. Moreover, the device shows a maximum energy density of 4.0 Wh kg(-1) (with a power density of 3.2 kW kg(-1)) and a maximum power density of 4.2 kW kg(-1) (with an energy density of 3.1 Wh kg(-1)). The results demonstrate that PEDOT may be a promising material for storage devices through a simple and efficient vapor-phase polymerization process with precisely controlled reaction conditions.

Method of making carbon-carbon composites

DOEpatents

Engle, Glen B.

1991-01-01

A process for making a carbon-carbon composite having a combination of high crystallinity, high strength, high modulus and high thermal and electrical conductivity. High-modulus/high-strength mesophase derived carbon fibers are woven into a suitable cloth. Layers of this easily graphitizable woven cloth are covered with petroleum or coal tar pitch and pressed at a temperature a few degrees above the softening point of the pitch to form a green laminated composite. The green composite is restrained in a suitable fixture and heated slowly to carbonize the pitch binder. The carbonized composite is then impregnated several times with pitch by covering the composite with hot pitch under pressure. The composites are given a heat treatment between each impregnation step to crack up the infiltrated carbon and allow additional pitch to enter the microstructure during the next impregnation cycle. The impregnated composites are then given a final heat treatment in the range 2500.degree. to 3000.degree. C. to fully graphitize the fibers and the matrix carbon. The composites are then infiltrated with pyrolytic carbon by chemical vapor deposition in the range 1000.degree. to 1300.degree. C. at a reduced pressure for approximately one hundred and fifty (150) hours.

Vapor-phase polymerization of poly(3, 4-ethylenedioxythiophene) nanofibers on carbon cloth as electrodes for flexible supercapacitors

NASA Astrophysics Data System (ADS)

Zhao, Xin; Dong, Mengyang; Zhang, Junxian; Li, Yingzhi; Zhang, Qinghua

2016-09-01

In this study, an evaporative vapor-phase polymerization approach was employed to fabricate vertically aligned poly(3, 4-ethylenedioxythiophene) (PEDOT) nanofibers on the surface of carbon cloth (CC). Optimized reaction conditions can obtain well distributed and uniform layers of high-aspect-ratio PEDOT nanofibers on CC. The hierarchical PEDOT/CC structure as a freestanding electrode exhibits good electrochemical properties. As a flexible symmetric supercapacitor, the PEDOT/CC hybrid electrode displays a specific areal capacitance of 201.4 mF cm-2 at 1 mA cm-2, good flexibility with a higher value (204.6 mF cm-2) in the bending state, and a good cycling stability of 92.4% after 1000 cycles. Moreover, the device shows a maximum energy density of 4.0 Wh kg-1 (with a power density of 3.2 kW kg-1) and a maximum power density of 4.2 kW kg-1 (with an energy density of 3.1 Wh kg-1). The results demonstrate that PEDOT may be a promising material for storage devices through a simple and efficient vapor-phase polymerization process with precisely controlled reaction conditions.

38 CFR 3.810 - Clothing allowance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... wears or uses certain prosthetic or orthopedic appliances which tend to wear or tear clothing (including... or used which tends to ware or tear the veteran's clothing, or that because of the use of a physician...

Self-contained clothing system provides protection against hazardous environments

NASA Technical Reports Server (NTRS)

1966-01-01

Self-contained clothing system protects personnel against hazardous environments. The clothing has an environmental control system and a complete protection envelope consisting of an outer garment, inner garment, underwear, boots, gloves, and helmet.

Larval fish collected from sound-scattering layers in an offshore tropical area.

PubMed

Castro, M S; Bonecker, A C T

2017-12-01

The composition of the larval fish assemblage in the sound-scattering layer of the continental shelf waters off the coast of south-eastern Brazil (12 and 22° S), a research project that is part of the Brazilian programme Avaliação do Potencial Sustentável de Recursos Vivos na Zona Econômica Exclusiva (REVIZEE), is described. Samples were collected during daylight hours and at dusk at five oceanographic stations in the winter of 1999 using an Isaacs-Kidd Midwater Trawl (IKMT). The oceanographic stations were chosen based on the detection of plankton layers by acoustic observation. A total of 2192 larval fish were identified, comprising 52 families and 62 species. Maurolicus stehmanni (Sternoptychidae) was the most abundant species found within the study area, comprising 18·5% of all identified larvae, followed by Psilotris celsus (Gobiidae) at 10·9%. © 2017 The Fisheries Society of the British Isles.

Metabasalts from the Mid-Atlantic Ridge: new insights into hydrothermal systems in slow-spreading crust

NASA Astrophysics Data System (ADS)

Gillis, Kathryn M.; Thompson, Geoffrey

1993-12-01

An extensive suite of hydrothermally altered rocks were recovered by Alvin and dredging along the MARK [Mid-Atlantic Ridge, south of the Kane Fracture Zone (23 24°N)] where detachment faulting has provided a window into the crustal component of hydrothermal systems. Rocks of basaltic composition are altered to two assemblages with these characteristics: (i) type I: albitic plagioclase (An02 10)+mixed-layer smectite/chlorite or chlorite±actinolite±quartz±sphene, <10% of the clinopyroxene is altered, and there is no trace metal mobility; (ii) type II: plagioclase (An10 30)+amphibole (actinolite-magnesio-hornblende) +chlorite+sphene, >20% of the clinopyroxene is altered, and Cu and Zn are leached. The geochemical signature of these alteration types reflects the relative proportion and composition of secondary minerals, and the degree of alteration of primary phases, and does not show simple predictive relationships. Element mobilities indicate that both alteration types formed at low water/rock ratios. The MARK assemblages are typical of the greenschist and transition to the amphibolite facies, and represent two distinct, albeit overlapping, temperature regimes: type I-180 to 300°C and type II-250 to 450°C. By analogy with DSDP/ODP Hole 504B and many ophiolites, the MARK metabasalts were altered within the downwelling limb of a hydrothermal cell and type I and II samples formed in the upper and lower portions of the sheeted like complex, respectively. Episodic magmatic and hydrothermal events at slow-spreading ridges suggest that these observed mineral assemblages represent the cumulative effects of more than one hydrothermal event. Groundmass and vein assemblages in the MARK metabasalts indicate either that alteration conditions did not change during successive hydrothermal events or that these assemblages record only the highest temperature event. Lack of retrograde reactions or overprinting of lower temperature assemblages (e.g., zeolites) suggests that there is a continuum in alteration conditions while crustal segments remain in the ridge axis environment. The type II samples may be representative of the reaction zone where compositions of hydrothermal fluids actively venting at the seafloor today become fixed. This prediction necessitates interaction between hydrothermal fluids and intersertal glass and/or mafic phases, in addition to plagioclase, in order to produce the observed range in vented fluid pH.

Petrography and trace element signatures in silicates and Fe-Ti-oxides from the Lanjiahuoshan deposit, Panzhihua layered intrusion, Southwest China

NASA Astrophysics Data System (ADS)

Gao, Wenyuan; Ciobanu, Cristiana L.; Cook, Nigel J.; Huang, Fei; Meng, Lin; Gao, Shang

2017-12-01

Permian mafic-ultramafic layered intrusions in the central part of the Emeishan Large Igneous Province (ELIP), Southwestern China, host Fe-Ti-V-oxide ores that have features which distinguish them from other large layered intrusion-hosted deposits. The origin of these ores is highly debated. Careful petrographic examination, whole rock analysis, electron probe microanalysis, and measurement and mapping of trace element concentrations by laser ablation inductively coupled plasma mass spectrometry in all major and minor minerals (clinopyroxene, plagioclase, olivine, amphibole, titanomagnetite, ilmenite, pleonaste and pyrrhotite) has been undertaken on samples from the Lanjiahuoshan deposit, representing the Middle, Lower and Marginal Zone of the Panzhihua intrusion. Features are documented that impact on interpretation of intrusion petrology and with implications for genesis of the Fe-Ti-V-oxide ores. Firstly, there is evidence, as symplectites between clinopyroxene and plagioclase, for introduction of complex secondary melts. Secondly, reaction between a late hydrothermal fluid and clinopyroxene is recognized, which has led to formation of hydrated minerals (pargasite, phlogopite), as well as a potassium metasomatic event, postdating intrusion solidification, which led to formation of K-feldspar. Lastly, partitioning of trace elements between titanomagnetite and silicates needs to consider scavenging of metals by ilmenite (Mn, Sc, Zr, Nb, Sn, Hf and Ta) and sulfides, as well as the marked partitioning of Co, Ni, Zn, Ga, As and Sb into spinels exsolved from titanomagnetite. The role of these less abundant phases may have been understated in previous studies, highlighting the importance of petrographic examination of complex silicate-oxide-sulfide assemblages, as well as the need for a holistic approach to trace element analysis, acknowledging all minerals within the assemblage.

Exposure received from application of animal insecticides.

PubMed

Stewart, P; Fears, T; Nicholson, H F; Kross, B C; Ogilvie, L K; Zahm, S H; Ward, M H; Blair, A

1999-01-01

Part of an investigation of data collection methods in epidemiologic studies of farmers evaluated exposures received by farmers from the application of insecticides to animals. Twenty farmers were monitored during a normal application using a fluorescent dye surrogate for the active ingredient (AI). Two exposure measures were estimated, AI concentration and the time-weighted average for the application period (TWAa). Four application methods were used: high- (n = 5) and low-pressure (n = 3) spraying, backpack (n = 2) and pour-on (n = 10). The two farmers using a backpack sprayer had nondetectable levels of dye. Only two of the farmers using the pour-on method had detectable dye levels, but these levels were high. All of the low- and high-pressure sprayers had detectable amounts of dye. Multiple layers of clothing, gloves, and boots (n = 10) were associated with a low mean AI concentration for the exposed farmers (18 micrograms) and more than two-thirds of the farmers wearing this amount of clothing had nondetectable exposures. In contrast, clothing providing little or no protection was associated with a significantly higher (p < 0.01) average AI concentration (4420 micrograms), and less than a third of the farmers with this degree of protection had nondetectable exposures. Poor work practices (leaking equipment, contact with wet animals or fences, and back splash) were associated with statistically higher exposure levels (p < 0.01) than the absence of such practices. There was a moderate statistically significant association between AI concentration and TWAa with total volume of the AI/dye/water mixture using the Spearman coefficient. Time was significantly inversely proportional to the two exposure measures. The association between the two exposure measures and AI volume was not significant.

29 CFR 785.24 - Principles noted in Portal-to-Portal Bulletin.

Code of Federal Regulations, 2014 CFR

2014-07-01

... certain clothes, changing clothes on the employer's premises at the beginning and end of the workday would be an integral part of the employee's principal activity. On the other hand, if changing clothes is...

29 CFR 785.24 - Principles noted in Portal-to-Portal Bulletin.

Code of Federal Regulations, 2012 CFR

2012-07-01

... certain clothes, changing clothes on the employer's premises at the beginning and end of the workday would be an integral part of the employee's principal activity. On the other hand, if changing clothes is...

29 CFR 785.24 - Principles noted in Portal-to-Portal Bulletin.

Code of Federal Regulations, 2011 CFR

2011-07-01

... certain clothes, changing clothes on the employer's premises at the beginning and end of the workday would be an integral part of the employee's principal activity. On the other hand, if changing clothes is...

29 CFR 785.24 - Principles noted in Portal-to-Portal Bulletin.

Code of Federal Regulations, 2013 CFR

2013-07-01

... certain clothes, changing clothes on the employer's premises at the beginning and end of the workday would be an integral part of the employee's principal activity. On the other hand, if changing clothes is...

Comparison of Biophysical Characteristics and Predicted Thermophysiological Responses of Three Prototype Body Armor Systems Versus Baseline U.S. Army Body Armor Systems

DTIC Science & Technology

2015-06-19

effective and scientifically valid method of making comparisons of clothing and equipment changes prior to conducting human research. predictive modeling...valid method of making comparisons of clothing and equipment changes prior to conducting human research. 2 INTRODUCTION Modern day...clothing and equipment changes prior to conducting human research. METHODS Ensembles Three different body armor (BA) plus clothing ensembles were

[MATCHE: Management Approach to Teaching Consumer and Homemaking Education.] Consumer Approach Strand: Textiles and Clothing. Module I-D-1: Consumer Approach to Textiles and Clothing.

ERIC Educational Resources Information Center

California State Univ., Fresno. Dept. of Home Economics.

This competency-based preservice home economics teacher education module on consumer approach to textiles and clothing is the first in a set of four modules on consumer education related to textiles and clothing. (This set is part of a larger series of sixty-seven modules on the Management Approach to Teaching Consumer and Homemaking Education…

Tradespace Assessment: Thermal Strain Modeling Comparison Of Multiple Clothing Configurations Based On Different Environmental Conditions

DTIC Science & Technology

2017-02-01

risks, by modeling thermal strain. Twenty clothing ensembles were tested for thermal and evaporative resistances according to American Society of...e.g., football, hockey, etc.) or during military, law enforcement, or first responder operations (e.g., body armor, flame resistant clothing, etc...Each clothing configuration was tested to American Society of Testing and Materials (ASTM) standards for “dry” thermal resistance (Rct) (ASTM F1291

Cloth Ballistic Vest Alters Response to Blast

DTIC Science & Technology

1988-01-01

Detrick, Frederick, MD 21701-501 ELEMENT NO. NO. NO. jACCESSION NO. 11. TITLE (include Security Classification) CLOTH BALLSISTIC VEST ALTERS RESPONSE...Suppl. ’rintd in USA Cloth Ballistic Vest Alters Response to Blast YANCY Y. PHILLIPS, M.D., THOMAS G. MUNDIE, PH.D., JOHN T. YELVERTON, M.S., AND DONALD R...RICHMOND, PH.D. Ballistic wounds have been and will remain the principal cause of casualties in combat. Cloth ballistic vests (CBV) play an

Using age on clothes size label to estimate weight in emergency paediatric patients.

PubMed

Elgie, Laura D; Williams, Andrew R

2012-10-01

To study formulae that estimate children's weight using their actual age. To determine whether using the age on their clothes size label in these formulae can estimate weight when their actual age is unknown. The actual age and age on the clothes labels of 188 children were inserted into formulae that estimate children's weight. These estimates were compared with their actual weight. Bland-Altman plots calculated the precision and accuracy of each of these estimates. In all formulae, using age on the clothes sizes label provided a more precise estimate than the child's actual age. In emergencies where a child's age is unknown, use of the age on their clothes label in weight-estimating formulae yields acceptable weight estimates. Even in situations where a child's age is known, the age on their clothes label may provide a more accurate and precise weight estimate than the actual age.

Measurement of Radioactive Contamination on Work Clothing of Workers Engaged in Decontamination Operations

NASA Astrophysics Data System (ADS)

Tsujimura, Norio; Yoshida, Tadayoshi; Hoshi, Katsuya

To rationally judge the necessity of the contamination screening measurements required in the decontamination work regulations, a field study of the surface contamination density on the clothing of the workers engaged in decontamination operations was performed. The clothing and footwear of 20 workers was analyzed by high-purity germanium (HPGe) gamma-ray spectroscopy. The maximum radiocesium activities (134Cs + 137Cs) observed were 3600, 1300, and 2100 Bq for the work clothing, gloves, and boots, respectively, and the derived surface contamination densities were below the regulatory limit of 40 Bq/cm2. The results of this field study suggest that the upper bounds of the surface contamination density on the work clothing, gloves, and boots are predictable from the maximum soil loading density on the surface of clothing and footwear and the radioactivity concentration in soil at the site.

Influence of relative humidity and temperature on quantity of electric charge of static protective clothing used in petrochemical industry

NASA Astrophysics Data System (ADS)

Zhang, Yunpeng; Liu, Quanzhen; Liu, Baoquan; Li, Yipeng; Zhang, Tingting

2013-03-01

In this paper, the working principle of static protective clothing and its testing method of quantity of electric charge are introduced, and the influence of temperature and relative humidity on the quantity of electric charge (qe) of static protective clothing is studied by measuring qe of different clothing samples. The result shows that temperature and relative humidity can influence qe of static protective clothing to some extent and the influence of relative humidity is bigger than that of temperature. According to experimental results, the relationship of qe and relative humidity and temperature was analysed, and the safety boundary of quantity of electric charge is discussed. In order to reduce the occurrence of electrostatic accidents and ensure safe production and operation of petrochemical industry, some suggestions on choosing and using of static protective clothing are given for guaranteeing its static protective performance.

Armored garment for protecting

DOEpatents

Purvis, James W [Albuquerque, NM; Jones, II, Jack F.; Whinery, Larry D [Albuquerque, NM; Brazfield, Richard [Albuquerque, NM; Lawrie, Catherine [Tijeras, NM; Lawrie, David [Tijeras, NM; Preece, Dale S [Watkins, CO

2009-08-11

A lightweight, armored protective garment for protecting an arm or leg from blast superheated gases, blast overpressure shock, shrapnel, and spall from a explosive device, such as a Rocket Propelled Grenade (RPG) or a roadside Improvised Explosive Device (IED). The garment has a ballistic sleeve made of a ballistic fabric, such as an aramid fiber (e.g., KEVLAR.RTM.) cloth, that prevents thermal burns from the blast superheated gases, while providing some protection from fragments. Additionally, the garment has two or more rigid armor inserts that cover the upper and lower arm and protect against high-velocity projectiles, shrapnel and spall. The rigid inserts can be made of multiple plies of a carbon/epoxy composite laminate. The combination of 6 layers of KEVLAR.RTM. fabric and 28 plies of carbon/epoxy laminate inserts (with the inserts being sandwiched in-between the KEVLAR.RTM. layers), can meet the level IIIA fragmentation minimum V.sub.50 requirements for the US Interceptor Outer Tactical Vest.

Hot steam transfer through heat protective clothing layers.

PubMed

Rossi, René; Indelicato, Eric; Bolli, Walter

2004-01-01

The aim of this study was to analyse the transfer of steam through different types of textile layers as a function of sample parameters such as thickness and permeability. In order to simulate the human body, a cylinder releasing defined amounts of moisture was also used. The influence of sweating on heat and mass transfer was assessed. The results show that in general impermeable materials offer better protection against hot steam than semi-permeable ones. The transfer of steam depended on the water vapour permeability of the samples, but also on their thermal insulation and their thickness. Increasing the thickness of the samples with a spacer gave a larger increase in protection with the impermeable samples compared to semi-permeable materials. Measurements with pre-wetted samples showed a reduction in steam protection in any case. On the other hand, the measurements with a sweating cylinder showed a beneficial effect of sweating.

Effect of wearing clothes on oxygen uptake and ratings of perceived exertion while swimming.

PubMed

Choi, S W; Kurokawa, T; Ebisu, Y; Kikkawa, K; Shiokawa, M; Yamasaki, M

2000-07-01

For a comparative study between swimming in swimwear (control-sw) and swimming in clothes (clothes-sw), oxygen uptake (VO2) and ratings of perceived exertion (RPE) were measured. The subjects were six male members of a university swimming team. Three swimming strokes--the breaststroke, the front crawl stroke and the elementary backstroke--were applied. With regards to clothes-sw, swimmers wore T-shirts, sportswear (shirt and pants) over swimwear and running shoes. In both cases of control-sw and clothes-sw, the VO2 was increased exponentially with increased swimming speed. The VO2 of the subjects during the clothed tests did not exceed 1.4 times of that in the case of control-sw at swimming speeds below 0.3 m/s. As swimming speeds increased, VO2 difference in both cases increased. Consequently, VO2 in the clothed tests was equal to 1.5-1.6 times and 1.5-1.8 times of that in the swimwear tests at speeds of 0.5 and 0.7 m/s, respectively. At speeds below 0.6 m/s in clothes-sw, the breaststroke showed lower VO2 than the front crawl stroke, and the elementary backstroke showed higher VO2 than the other two swimming strokes. RPE increased linearly with %peak VO2. In addition, any RPE differences among the three swimming strokes were not shown in the control-sw tests. At an exercise intensity above 60 %peak VO2, clothed swimmers showed slightly higher RPE in the front crawl stroke compared to that in the two other swimming strokes.

Halide removal from aqueous solution by novel silver-polymeric materials.

PubMed

A M S, Polo; I, Velo-Gala; M, Sánchez-Polo; U, von Gunten; J J, López-Peñalver; J, Rivera-Utrilla

2016-12-15

The objective of this study was to analyze the behavior of a new material, silver-doped polymeric cloth (Ag-cloth), in the removal of bromide and iodide from waters. Silver is immobilized on the cloth, guaranteeing selective adsorption of the halide ions as retained silver halides that therefore do not pass into the solution. Results indicate that Ag 0 reacts with H 2 O 2 in the first phases of the process, yielding Ag + and superoxide radical; however, as the process advances, this radical favors Ag + reduction. Increases in the concentration of H 2 O 2 augment the capacity of the Ag-cloth to remove halides from the medium up to a maximum concentration (55μM), above which the removal capacity remains constant (Xm≅1.3-1.8mg halide/g Ag-cloth). Thus, when there is excess H 2 O 2 in the medium, secondary competitive reactions that take place in the process guarantee a constant Ag + concentration, which defines the maximum adsorption capacity of Ag-cloth, reducing its ability to remove halides. Ag-cloth has a higher capacity to remove iodide than bromide, and the presence of organic matter or chloride reduces its capacity to remove iodide or bromide from water. The results obtained shown that the capacity of Ag 0 with H 2 O 2 significantly varies as a function of the medium pH from 1mg Br - /g Ag-cloth at very low pH to 1.6mg/g Ag-cloth at pH9. Copyright © 2016 Elsevier B.V. All rights reserved.

Reduction of risk of Salmonella infection from kitchen cleaning clothes by use of sodium hypochlorite disinfectant cleaner.

PubMed

Chaidez, C; Soto-Beltran, M; Gerba, C P; Tamimi, A H

2014-11-01

The objective of this study was to evaluate the reduction of infection risk due to exposure to Salmonella sp. in kitchen cleaning clothes by the use of a bleach (sodium hypochlorite) cleaner utilizing a continuous-time dynamic exposure model. The only route of exposure considered was hand contamination during cloth use. The occurrence and numbers of Salmonella was studied in 60 homes over a 6-week period in which half disinfected kitchen cleaning clothes with a sodium hypochlorite based disinfectant cleaner. This study demonstrated that a significant risk exists for Salmonella infection from kitchen cleaning clothes in Mexican homes and that this risk can be reduced by almost 100-fold by soaking cleaning clothes in a bleach product. The risks of infection and illness could likely be further reduced by developing a more effective procedure for reducing Salmonella in cleaning clothes treated twice a day with a sodium hypochlorite disinfectant (i.e. longer soaking time) or using a greater concentration of the disinfectant. Hygiene intervention is a key strategy to reduce the potential risk of disease-causing micro-organisms in households. There is a lack of understanding of the human health risk associated with the use of contaminated kitchen cleaning cloths. The study used a quantitative microbial risk assessment to estimate the risk associated with the use of kitchen cleaning clothes by using disinfectant products. The results showed that the use of prescribe protocols can reduce the risk of Salmonella infections in household kitchens. © 2014 The Society for Applied Microbiology.

Diatoms in comets

NASA Technical Reports Server (NTRS)

Hoover, R.; Hoyle, F.; Wallis, M. K.; Wickramasinghe, N. C.

1986-01-01

The fossil record of the microscopic algae classified as diatoms suggests they were injected to earth at the Cretaceous boundary. Not only could diatoms remain viable in the cometary environment, but also many species might replicate in illuminated surface layers or early interior layers of cometary ice. Presumably they reached the solar system on an interstellar comet as an already-evolved assemblage of organisms. Diatoms might cause color changes to comet nuclei while their outgassing decays and revives around highly elliptical orbits. Just as for interstellar absorption, high-resolution IR observations are capable of distinguishing whether the 10-micron feature arises from siliceous diatom material or mineral silicates. The 10-30-micron band and the UV 220-nm region can also provide evidence of biological material.

Cold related mortalities and protection against cold in Yakutsk, eastern Siberia: observation and interview study

PubMed Central

Donaldson, G C; Ermakov, S P; Komarov, Y M; McDonald, C P; Keatinge, W R

1998-01-01

Objective To assess how effectively measures adopted in extreme cold in Yakutsk control winter mortality. Design Interviews to assess outdoor clothing and measure indoor temperatures; regressions of these and of delayed cause-specific mortalities on temperature. Setting Yakutsk, east Siberia, Russia. Subjects: All people aged 50-59 and 65-74 years living within 400 km of Yakutsk during 1989-95 and sample of 1002 men and women who agreed to be interviewed. Main outcome measures Daily mortality from all causes and from ischaemic heart, cerebrovascular, and respiratory disease. Results Mean temperature for October-March 1989-95 was −26.6°C. At 10.2°C people wore 3.30 (95% confidence interval 3.08 to 3.53) layers of clothing outdoors, increasing to 4.39 (4.13 to 4.66; P<0.0001) layers at −20°C. Thick coats, often of fur, replaced anoraks as temperature fell to −48.2°C. 82% of people went out each day when temperatures were 10.2°C to −20°C, but below −20°C the proportion fell steadily to 44% (35% to 53%) at −48.2°C (P<0.001), and overall shivering outdoors did not increase. Living room temperature was 17.9 (17.2 to 18.5)°C at 10.2°C outdoors, 19.6 (18.8 to 20.4)°C at −20°C, and 19.1 (18.6 to 19.6)°C at −48.2°C. Mortality from all causes and from ischaemic heart and respiratory disease was unaffected by the fall in temperature. Mortality from respiratory disease (daily deaths per million) rose from 4.7 (4.3 to 5.1) to 5.1 (4.4 to 5.7) (P=0.03), but this was offset by a fall in deaths from injury. Conclusions People in Yakutsk wore very warm clothing, and in extremely cold weather stayed indoors in warm housing, preventing the increases in mortality seen in winter in milder regions of the world. Only respiratory mortality rose, perhaps because of breathing cold air. Key messagesDeath rates from ischaemic heart, cerebrovascular, and respiratory disease and all causes have been shown to increase as air temperature fallsIn Yakutsk, Russia, mortality from cerebrovascular and ischaemic heart disease and all causes among people aged 50-59 and 65-74 was unchanged as temperature fell to −48.2°CMortality from respiratory disease increased as temperatures fell below −20°C but this was more than offset by a decrease in deaths from accidentsExceptionally warm clothing, with reduction of outdoor excursions at temperatures below −20°C, prevented overall outdoor cold stress PMID:9765165

[Clothes of the HOUSE, or Clothes of REASON? Children's clothing during the Age of Enlightenment].

PubMed

Kottek, Samuel

2014-01-01

Children's clothing is a subject that forms part of the history of pediatrics. Many studies focus on the ideas developed by Locke and Rousseau. Here we choose to focus our study on an author who is rarely quoted: Jacques Ballexserd (1726-1774), "citizen of Geneva," who is little known to historians of pediatrics. However, George Frederic Still (1868-1941) devotes two pages to his views in his Histoire de la Pédiatrie.

An effective intervention to improve the cleanliness of medical lead clothes in an orthopedic specialized hospital.

PubMed

Chen, Lu; Xu, YingJun; Zhang, Fengxia; Yang, Qingfeng; Yuan, Juxiang

2016-11-01

Dirty medical lead clothes, contaminated with blood or other infected material, may carry ongoing bioburden, which increase the risk of hospital-acquired infection. In this study, we investigated medical lead clothes contamination levels and assessed the effectiveness of the intervention that was constructed to improve the cleanliness of lead clothes. Copyright © 2016 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

[MATCHE: Management Approach to Teaching Consumer and Homemaking Education.] Consumer Approach Strand: Textiles and Clothing. Module I-D-4: Applications and Implications of New Technology in Textiles and Clothing.

ERIC Educational Resources Information Center

Joseph, Marjory

This competency-based preservice home economics teacher education module on applications and implications of new technology in textiles and clothing is the fourth in a set of four modules on consumer education related to textiles and clothing. (This set is part of a larger series of sixty-seven modules on the Management Approach to Teaching…

EPRI guide to managing nuclear utility protective clothing programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, J.J.

1991-05-01

The Electric Power Research Institute (EPRI) commissioned a radioactive waste related project (RP2414-34) during the last quarter of 1989 to produce a guide for developing and managing nuclear protective clothing programs. Every nuclear facility must coordinate some type of protective clothing program for its radiation workers to insure proper and safe protection for the wearer and to maintain control over the spread of contamination. Yet, every nuclear facility has developed its own unique program for managing such clothing. Accordingly, a need existed for a reference guide to assist with the standardization of protective clothing programs and to assist in controllingmore » the potentially runaway economics of such programs. This document is the first known effort to formalize the planning and economic factors surrounding a nuclear utility protective clothing program. It is intended to be informative by addressing the various pieces of information necessary to establish and maintain an effective, professionally managed protective clothing program. It also attempts to provide guidance toward tailoring the information and providing examples within the report to fit each utility's specific needs. This report is further intended to address new issues and trends occurring throughout the nuclear industry in late 1989 which can have either a significant positive or negative impact on the operations or economics of nuclear protective clothing programs. 1 ref., 11 tabs.« less

Impact of nurses clothing on anxiety of hospitalised children.

PubMed

Roohafza, Hamidreza; Pirnia, Afsaneh; Sadeghi, Masoumeh; Toghianifar, Nafiseh; Talaei, Mohammad; Ashrafi, Mahmood

2009-07-01

To investigate anxiety levels in two groups of children exposed to nurses with white vs. coloured clothing in a university hospital in Iran. Hospitalisation causes anxiety in children and it is documented that nurses have an important role in alleviating children's distress and anxiety. Nurses characteristics, including their clothing is a factor that affects quality of care through child-nurse relationship. Clinical trial. Children (n = 92) aged 7-15 years old hospitalised for 3-5 days in paediatric surgery ward were exposed to nurses in white or coloured clothing. Children's anxiety was assessed on admission and at discharge using Revised Children's Manifest Anxiety Scale. Children exposed to white nursing uniforms showed higher anxiety levels compared with children exposed to coloured nursing clothing (p < or = 0.05). Besides coloured nursing clothing, female sex, age >11 years old (guidance school) and living in families with more than four members were predictors of lower global anxiety scores. Providing a child-friendly environment through colourful nursing clothing can promote nurses' relationship with hospitalised children. This can satisfy children's expectations of the nursing care and alleviates the need for meeting ideals of nursing care through wearing a white nursing uniform provided that standards of nursing care are favoured. Using colourful nursing clothing in paediatric wards reduces anxiety as a psychological parameter which delays improvement and provides a child-friendly environment that helps promotion of quality of nursing care.

Benthic biodiversity and ecological gradients in the Seno Magdalena (Puyuhuapi Fjord, Chile)

NASA Astrophysics Data System (ADS)

Betti, F.; Bavestrello, G.; Bo, M.; Enrichetti, F.; Loi, A.; Wanderlingh, A.; Pérez-Santos, I.; Daneri, G.

2017-11-01

Due to its complex hydrological, geomorphological and climatic features, the Chilean fjords region is considered among the most productive areas of the world. The benthic fauna of this region accounts for more than 1600 species showing marked latitudinal biogeographic differences characterizing this as one of the most important hotspot of biodiversity of cold-temperate environments. Despite numerous studies have been conducted to depict the biological characteristics of the fjords, the present situation is strongly unbalanced towards specific taxa. Hence, this study takes into consideration a community approach, highlighting the distribution of six benthic assemblages thriving on vertical walls along the Seno Magdalena fjord (Aysen region). Underwater pictures were used to characterize the trends in abundance and diversity of the main taxa showing distinct responses to salinity and turbidity. Among the less tolerant taxa to high fresh water inputs there are encrusting algae, mainly found in the most external sites lashed by outer currents, far from the estuarine plume. The bathymetric zonation of the assemblages, instead, is characterized by a dense mussel belt in the first 10 m, within a thick layer of low-salinity, nutrient-enriched waters. Rich assemblages of sponges, brachiopods, gorgonians and scleractinians thrive in deeper, marine, clear waters. The evaluation of the ecological role of benthic species leads both to the definition of potential bioindicator taxa responding to anthropic disturbances and to the promotion of protected areas.

Frost and leaf-size gradients in forests: global patterns and experimental evidence.

PubMed

Lusk, Christopher H; Clearwater, Michael J; Laughlin, Daniel C; Harrison, Sandy P; Prentice, Iain Colin; Nordenstahl, Marisa; Smith, Benjamin

2018-05-16

Explanations of leaf size variation commonly focus on water availability, yet leaf size also varies with latitude and elevation in environments where water is not strongly limiting. We provide the first conclusive test of a prediction of leaf energy balance theory that may explain this pattern: large leaves are more vulnerable to night-time chilling, because their thick boundary layers impede convective exchange with the surrounding air. Seedlings of 15 New Zealand evergreens spanning 12-fold variation in leaf width were exposed to clear night skies, and leaf temperatures were measured with thermocouples. We then used a global dataset to assess several climate variables as predictors of leaf size in forest assemblages. Leaf minus air temperature was strongly correlated with leaf width, ranging from -0.9 to -3.2°C in the smallest- and largest-leaved species, respectively. Mean annual temperature and frost-free period were good predictors of evergreen angiosperm leaf size in forest assemblages, but no climate variable predicted deciduous leaf size. Although winter deciduousness makes large leaves possible in strongly seasonal climates, large-leaved evergreens are largely confined to frost-free climates because of their susceptibility to radiative cooling. Evergreen leaf size data can therefore be used to enhance vegetation models, and to infer palaeotemperatures from fossil leaf assemblages. © 2018 The Authors New Phytologist © 2018 New Phytologist Trust.

Early Evidence for the Extensive Heat Treatment of Silcrete in the Howiesons Poort at Klipdrift Shelter (Layer PBD, 65 ka), South Africa

PubMed Central

Douze, Katja; Wurz, Sarah; Bellot-Gurlet, Ludovic; Conard, Nicholas J.; Nickel, Klaus G.; van Niekerk, Karen L.; Henshilwood, Christopher S.

2016-01-01

Heating stone to enhance its flaking qualities is among the multiple innovative adaptations introduced by early modern human groups in southern Africa, in particular during the Middle Stone Age Still Bay and Howiesons Poort traditions. Comparatively little is known about the role and impact of this technology on early modern human behaviors and cultural expressions, due, in part, to the lack of comprehensive studies of archaeological assemblages documenting the heat treatment of stone. We address this issue through an analysis of the procedure used for heating and a technological analysis of a lithic assemblage recovered from one Howiesons Poort assemblage at Klipdrift Shelter (southern Cape, South Africa). The resulting data show extensive silcrete heat treatment, which adds a new dimension to our understanding of fire-related behaviors during the Howiesons Poort, highlighting the important role played by a heat treatment stage in the production of silcrete blades. These results are made possible by our new analytical procedure that relies on the analysis of all silcrete artifacts. It provides direct evidence of a controlled use of fire which took place during an early stage of core exploitation, thereby impacting on all subsequent stages of the lithic chaîne opératoire, which, to date, has no known equivalent in the Middle Stone Age or Middle Paleolithic record outside of southern Africa. PMID:27760210

Cretaceous plutonic rocks in the Donner Lake-Cisco Grove area, northern Sierra Nevada, California

USGS Publications Warehouse

Kulow, Matthew J.; Hanson, Richard E.; Girty, Gary H.; Girty, Melissa S.; Harwood, David S.

1998-01-01

The northernmost occurrences of extensive, glaciated exposures of the Sierra Nevada batholith occur in the Donner Lake-Cisco Grove area of the northern Sierra Nevada. The plutonic rocks in this area, which are termed here the Castle Valley plutonic assemblage, crop out over an area of 225 km2 and for the most part are shown as a single undifferentiated mass on previously published geological maps. In the present work, the plutonic assemblage is divided into eight separate intrusive units or lithodemes, two of which each consist of two separate plutons. Compositions are dominantly granodiorite and tonalite, but diorite and granite form small plutons in places. Spectacular examples of comb layering and orbicular texture occur in the diorites. U-Pb zircon ages have been obtained for all but one of the main units and range from ~120 to 114 Ma, indicating that the entire assemblage was emplaced in a narrow time frame in the Early Cretaceous. This is consistent with abundant field evidence that many of the individual phases were intruded penecontemporaneously. The timing of emplacement correlates with onset of major Cretaceous plutonism in the main part of the Sierra Nevada batholith farther south. The emplacement ages also are similar to isotopic ages for gold-quartz mineralization in the Sierran foothills west of the study area, suggesting a direct genetic relationship between the voluminous Early Cretaceous plutonism and hydrothermal gold mineralization.

Dysaerobic trace fossils and ichnofabrics in the upper Jurassic Kimmeridge Clay of southern England

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wignall, P.B.

The trace fossil suite from the Kimmeridge Clay is calibrated against an oxygen gradient derived from previous geochemical, lithological and shelly macrofaunal studies. Several soft-bodied trace markers appear to have tolerated lower oxygen tensions than even the hardiest shelly benthic macrofauna-a common occurrence in both recent and ancient dysaerobic settings. Lowest diversity trace fossil assemblages consist of Astacimorphichnus etchesi (new ichnotaxon), a small endostratal pascichnial trace attributed to pioneering polychaete populations. Ekdale and Masons' (1988) contention that fodinichnia dominate the lowest diversity and lowest oxygen settings is not substantiated as the only example of this feeding strategy, Rhizocorallium irregulare, ismore » encountered in moderately diverse trace fossil assemblages associated with a low diversity shelly macrofauna. Upper dysaerobic conditions are characterized by the development of a surface mixed layer and the consequent destruction of fine lamination. Tiering is only developed under normal oxygen conditions with Chondrites as the deepest trace. In contrast to many previous studies, Chondrites is never found in dysaerobic facies.« less

Variation in Lithic Technological Strategies among the Neanderthals of Gibraltar

PubMed Central

Shipton, Ceri; Clarkson, Christopher; Bernal, Marco Antonio; Boivin, Nicole; Finlayson, Clive; Finlayson, Geraldine; Fa, Darren; Pacheco, Francisco Giles; Petraglia, Michael

2013-01-01

The evidence for Neanderthal lithic technology is reviewed and summarized for four caves on The Rock of Gibraltar: Vanguard, Beefsteak, Ibex and Gorham’s. Some of the observed patterns in technology are statistically tested including raw material selection, platform preparation, and the use of formal and expedient technological schemas. The main parameters of technological variation are examined through detailed analysis of the Gibraltar cores and comparison with samples from the classic Mousterian sites of Le Moustier and Tabun C. The Gibraltar Mousterian, including the youngest assemblage from Layer IV of Gorham’s Cave, spans the typical Middle Palaeolithic range of variation from radial Levallois to unidirectional and multi-platform flaking schemas, with characteristic emphasis on the former. A diachronic pattern of change in the Gorham’s Cave sequence is documented, with the younger assemblages utilising more localized raw material and less formal flaking procedures. We attribute this change to a reduction in residential mobility as the climate deteriorated during Marine Isotope Stage 3 and the Neanderthal population contracted into a refugium. PMID:23762312

Characterization of Polyester Cloth as an Alternative Separator to Nafion Membrane in Microbial Fuel Cells for Bioelectricity Generation Using Swine Wastewater.

PubMed

Kim, Taeyoung; Kang, Sukwon; Sung, Je Hoon; Kang, Youn Koo; Kim, Young Hwa; Jang, Jae Kyung

2016-12-28

Polyester cloth (PC) was selected as a prospective inexpensive substitute separator material for microbial fuel cells (MFCs). PC was compared with a traditional Nafion proton exchange membrane (PEM) as an MFC separator by analyzing its physical and electrochemical properties. A single layer of PC showed higher mass transfer ( e.g ., for O₂/H⁺/ions) than the Nafion PEM; in the case of oxygen mass transfer coefficient (k o ), a rate of 50.0 × 10⁻⁵ cm·s⁻¹ was observed compared with a rate of 20.8 × 10⁻⁵ cm/s in the Nafion PEM. Increased numbers of PC layers were found to reduce the oxygen mass transfer coefficient. In addition, the diffusion coefficient of oxygen (D O ) for PC (2.0-3.3 × 10⁻⁶ cm²/s) was lower than that of the Nafion PEM (3.8 × 10⁻⁶ cm²/s). The PC was found to have a low ohmic resistance (0.29-0.38 Ω) in the MFC, which was similar to that of Nafion PEM (0.31 Ω); this resulted in comparable maximum power density and maximum current density in MFCs with PC and those with Nafion PEMs. Moreover, a higher average current generation was observed in MFCs with PC (104.3 ± 15.3 A/m³) compared with MFCs with Nafion PEM (100.4 ± 17.7 A/m³), as well as showing insignificant degradation of the PC surface, during 177 days of use in swine wastewater. These results suggest that PC separators could serve as a low-cost alternative to Nafion PEMs for construction of cost-effective MFCs.

48 CFR 225.7002-1 - Restrictions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... grown, reprocessed, reused, or produced in the United States: (1) Food. (2) Clothing and the materials... associated with, clothing and the materials and components thereof. Clothing includes items such as outerwear, headwear, underwear, nightwear, footwear, hosiery, handwear, belts, badges, and insignia. For additional...

48 CFR 225.7002-1 - Restrictions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... grown, reprocessed, reused, or produced in the United States: (1) Food. (2) Clothing and the materials... associated with, clothing and the materials and components thereof. Clothing includes items such as outerwear, headwear, underwear, nightwear, footwear, hosiery, handwear, belts, badges, and insignia. For additional...

48 CFR 225.7002-1 - Restrictions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... grown, reprocessed, reused, or produced in the United States: (1) Food. (2) Clothing and the materials... associated with, clothing and the materials and components thereof. Clothing includes items such as outerwear, headwear, underwear, nightwear, footwear, hosiery, handwear, belts, badges, and insignia. For additional...

48 CFR 225.7002-1 - Restrictions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... grown, reprocessed, reused, or produced in the United States: (1) Food. (2) Clothing and the materials... associated with, clothing and the materials and components thereof. Clothing includes items such as outerwear, headwear, underwear, nightwear, footwear, hosiery, handwear, belts, badges, and insignia. For additional...

48 CFR 225.7002-1 - Restrictions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... grown, reprocessed, reused, or produced in the United States: (1) Food. (2) Clothing and the materials... associated with, clothing and the materials and components thereof. Clothing includes items such as outerwear, headwear, underwear, nightwear, footwear, hosiery, handwear, belts, badges, and insignia. For additional...

Weed seeds on clothing: a global review.

PubMed

Ansong, Michael; Pickering, Catherine

2014-11-01

Weeds are a major threat to biodiversity including in areas of high conservation value. Unfortunately, people may be unintentionally introducing and dispersing weed seeds on their clothing when they visit these areas. To inform the management of these areas, we conducted a systematic quantitative literature review to determine the diversity and characteristics of species with seeds that can attach and be dispersed from clothing. Across 21 studies identified from systematic literature searches on this topic, seeds from 449 species have been recorded on clothing, more than double the diversity found in a previous review. Nearly all of them, 391 species, are listed weeds in one or more countries, with 58 classified as internationally-recognised environmental weeds. When our database was compared with weed lists from different countries and continents we found that clothing can carry the seeds of important regional weeds. A total of 287 of the species are listed as aliens in one or more countries in Europe, 156 are invasive species/noxious weeds in North America, 211 are naturalized alien plants in Australia, 97 are alien species in India, 33 are invasive species in China and 5 are declared weeds/invaders in South Africa. Seeds on the clothing of hikers can be carried to an average distance of 13 km, and where people travel in cars, trains, planes and boats, the seeds on their clothing can be carried much further. Factors that affect this type of seed dispersal include the type of clothing, the type of material the clothing is made from, the number and location of the seeds on plants, and seed traits such as adhesive and attachment structures. With increasing use of protected areas by tourists, including in remote regions, popular protected areas may be at great risk of biological invasions by weeds with seeds carried on clothing. Copyright © 2014 Elsevier Ltd. All rights reserved.

Survey of Occupational Allergic Contact Dermatitis and Patch Test among Clothing Employees in Beijing.

PubMed

Chen, Yu-Xin; Gao, Bing-Ai; Cheng, Hai-Yan; Li, Lin-Feng

2017-01-01

Occupational population-based epidemiological data relating to occupational contact allergies in the Chinese clothing industry are limited. To investigate the prevalence of occupational allergic contact dermatitis (OACD) and to identify the causative allergens among clothing employees in China, a cross-sectional study was conducted in 529 clothing employees at 12 clothing factories in Beijing. All employees were subjected to an interview using self-administered questionnaire and skin examination, and those who were diagnosed with occupational contact dermatitis (OCD) were patch tested. In the present survey, we found that the overall 1-year prevalence of OACD among the clothing employees was 8.5%. The 1-year prevalence of OACD among workers (10.8%) was significantly higher than that among managers (3.2%). The lesions were primarily on the hands and wrists in workers, but the face and neck in managers. The major allergens were nickel sulfate and cobalt dichloride in workers and colophony and p -tert-butylphenol formaldehyde resin in managers. In conclusion, workers are at a higher risk of OACD compared with managers in the Chinese clothing industry. In addition to hand dermatitis in workers, airborne contact dermatitis on the face and neck should be also addressed in managers.

Importance of clothing removal in scalds.

PubMed

Lau, Edgar Y K; Tam, Yvonne Y W; Chiu, T W

2016-04-01

To test the hypothesis that prompt removal of clothing after scalds lessens the severity of injury. This experimental study and case series was carried out in the Burn Centre of a tertiary hospital in Hong Kong. An experimental burn model using Allevyn (Smith & Nephew Medical Limited, Hull, England) as a skin substitute was designed to test the effect of delayed clothing removal on skin temperature using hot water and congee. Data of patients admitted with scalding by congee over a 10-year period (January 2005 to December 2014) were also studied. A significant reduction in the temperature of the skin model following a hot water scald was detected only if clothing was removed within the first 10 seconds of injury. With congee scalds, the temperature of the skin model progressively increased with further delay in clothing removal. During the study period, 35 patients were admitted with congee scalds to our unit via the emergency department. The majority were children. Definite conclusions supporting the importance of clothing removal could not be drawn due to our small sample size. Nonetheless, our data suggest that appropriate prehospital burn management can reduce patient morbidity. Prompt removal of clothing after scalding by congee may reduce post-burn morbidity.

Personal clothing as a potential vector of respiratory virus transmission in childcare settings.

PubMed

Gralton, Jan; McLaws, Mary-Louise; Rawlinson, William D

2015-06-01

Previous investigations of fomite transmission have focused on the presence of pathogens on inanimate objects in clinical settings. There has been limited investigation of fomite transmission in non-clinical pediatric settings where there is a high prevalence of respiratory virus infections. Over a 5 week period, this study investigated whether the personal clothing of teachers working in childcare centers was contaminated with viral RNA, and potentially could mediate virus transmission. Matched morning and evening clothing and nasal samples were collected for 313 teacher work days (TWDs). Human rhinoviruses (hRV) RNA were detected from samples using real-time PCR. Human rhinovirus RNA was detected in clothing samples on 16 TWDs and in nasal samples on 32 TWDs. There were no TWDs when teachers provided both positive nasal and clothing samples and only three TWDs when hRV persisted on clothing for the entire day. The detection of hRV RNA was significantly predicted by self-recognition of symptomatic illness by the teacher 2 days prior to detection. These findings suggest that teachers' personal clothing in childcare settings is unlikely to facilitate the transmission of hRV. © 2015 Wiley Periodicals, Inc.

Protective clothing, re-engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lorenz, S.M.

1995-11-01

In 1993, Commonwealth Edison spent 5.1 Million dollars for protective clothing materials and services for six power plants. Therefore, it was necessary for ComEd to evaluate their protective clothing programs while also considering the rapid escalation in disposal costs and the potential for on-site storage of waste. Today, I will be discussing the preliminary planning and the outcome of one year`s worth of investigating, reviewing, and calculating for an operation that will save Commonwealth Edison millions of dollars. A Process Engineering Reevaluation Team composed of corporate and power plant personnel was formed to evaluate all aspects of protective clothing materialsmore » and services. Throughout the year, the nine member team consulted clothing manufacturers, commercial laundry operators, and laundry equipment specialists. Faced with a wide range of garment design, types, sizes, materials, and disposal options, we were faced with a considerable challenge. In addition, we had to develop a product that all six sites would agree on. Three areas in particular that the team sought to improve were the material of the clothing, design of the garment, and the ability to share the protective clothing with all six of our nuclear sites.« less

Survey of Occupational Allergic Contact Dermatitis and Patch Test among Clothing Employees in Beijing

PubMed Central

Chen, Yu-Xin; Gao, Bing-Ai; Cheng, Hai-Yan

2017-01-01

Occupational population-based epidemiological data relating to occupational contact allergies in the Chinese clothing industry are limited. To investigate the prevalence of occupational allergic contact dermatitis (OACD) and to identify the causative allergens among clothing employees in China, a cross-sectional study was conducted in 529 clothing employees at 12 clothing factories in Beijing. All employees were subjected to an interview using self-administered questionnaire and skin examination, and those who were diagnosed with occupational contact dermatitis (OCD) were patch tested. In the present survey, we found that the overall 1-year prevalence of OACD among the clothing employees was 8.5%. The 1-year prevalence of OACD among workers (10.8%) was significantly higher than that among managers (3.2%). The lesions were primarily on the hands and wrists in workers, but the face and neck in managers. The major allergens were nickel sulfate and cobalt dichloride in workers and colophony and p-tert-butylphenol formaldehyde resin in managers. In conclusion, workers are at a higher risk of OACD compared with managers in the Chinese clothing industry. In addition to hand dermatitis in workers, airborne contact dermatitis on the face and neck should be also addressed in managers. PMID:28396866

Making the optimal decision in selecting protective clothing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Price, J. Mark

2007-07-01

Protective Clothing plays a major role in the decommissioning and operation of nuclear facilities. Literally thousands of employee dress-outs occur over the life of a decommissioning project and during outages at operational plants. In order to make the optimal decision on which type of protective clothing is best suited for the decommissioning or maintenance and repair work on radioactive systems, a number of interrelating factors must be considered, including - Protection; - Personnel Contamination; - Cost; - Radwaste; - Comfort; - Convenience; - Logistics/Rad Material Considerations; - Reject Rate of Laundered Clothing; - Durability; - Security; - Personnel Safety includingmore » Heat Stress; - Disposition of Gloves and Booties. In addition, over the last several years there has been a trend of nuclear power plants either running trials or switching to Single Use Protective Clothing (SUPC) from traditional protective clothing. In some cases, after trial usage of SUPC, plants have chosen not to switch. In other cases after switching to SUPC for a period of time, some plants have chosen to switch back to laundering. Based on these observations, this paper reviews the 'real' drivers, issues, and interrelating factors regarding the selection and use of protective clothing throughout the nuclear industry. (authors)« less

The Morphological Characterization of the Forewing of the Manduca sexta Species for the Application of Biomimetic Flapping Wing Micro Air Vehicles

DTIC Science & Technology

2012-01-01

16.64 Figure 3. Venation map of Manduca sexta forewing [11]. 2.4. Venation Insect wings are formed from a complex makeup of polymer based chains, Chitin ...for coloration, but may subtly influence flow patterns and boundary layer structure over wings [4, 24]. There is significant understanding of chitin ...biological specimen to vary the bonding chains, assemblage of nanofibers and crystalline structure, the material properties of chitin can vary over a

Advanced technology gas-fired commercial clothes dryer. Final report, April 1985-December 1988

DOE Office of Scientific and Technical Information (OSTI.GOV)

Topping, R.F.

1991-04-01

The objective of this effort was to demonstrate the technical feasibility of an advanced technology commercial clothes dryer (ATD) which could provide improved fuel efficiency and reduced drying time without burning or otherwise damaging the clothes load.

Warmtetransport in Kleding bij Aanstraling met Warmte (Heat Transport in Clothing during Irradiation with Heat)

DTIC Science & Technology

1990-01-22

the thermal insulation of clothing . Ergonomics 2S, 1617-1632. Nielsen, B., Kasson, K. en Aschengreen, F.E. (1988). Heat balance during exercise in...the sun. Eur. J. Appl. Physiol. 58, 189-196. Nielsen, B. (1989). Solar heat load: heat balance during exercise in clothed subjects. Manuscript voor Eur...Institute for Perception, Soesterberg, The Netherlands Heat transport in clothing during irradiation vith heat A.M.J. Pieters and W.A. Lotens ABSTRACT A

U.S. Clothing and Textile Trade with China and the World: Trends Since the End of Quotas

DTIC Science & Technology

2007-07-10

the road to quota-free trade for clothing and textiles, the MFA expanded the scope of the LTA to include wool and man-made fibers. However, concerns...starting a 10-year process of eliminating quotas for international trade in clothing and textiles. The ATC’s quota phase-out contained two concurrent...goods. The ATC also required that products from different categories — textiles and clothing, wool , cotton or man-made fibres, etc. — be included in

The Sandvik peridotite, Gurskøy, Norway: Three billion years of mantle evolution in the Baltica lithosphere

NASA Astrophysics Data System (ADS)

Lapen, Thomas J.; Medaris, L. Gordon, Jr.; Beard, Brian L.; Johnson, Clark M.

2009-05-01

The Sandvik ultramafic body, Island of Gurskøy, Western Gneiss Region, Norway, is a mantle fragment that contains polymetamorphic mineral assemblages and affords a unique view into the response of subcontinental lithospheric mantle to repeated orogenic/magmatic events. The Sandvik peridotite body and nearby outcrops record four paragenetic stages: 1) pre-exsolution porphyroclasts of ol + grt + opx (high-Ca ) + cpx (low-Ca), which equilibrated at 1100-1200 °C and 6.5-7.0 GPa; 2) kelyphite containing ol + grt + spl +opx (low-Ca) + am (high-Al), as well as exsolved pyroxene containing opx + cpx + spl in equilibrium with matrix olivine, at 725 °C and 1.5 GPa; 3) granoblastic matrix of ol + spl + opx (low-Ca) + am (high-Al), at 700 °C and 1.0 GPa. A nearby outcrop contains a fourth assemblage consisting of ol + chl + opx + am. Lu-Hf and Re-Os model ages of garnet peridotite indicate melt depletion at 3.3 Ga [Beyer, E.E., Brueckner, H.K., Griffin, W.L., O'Reilly, S.Y., Graham, S., 2004. Archean mantle fragments in Proterozoic crust, Western Gneiss Region, Norway. Geology 32, 609-612.; Lapen, T.J., Medaris, L.G. Jr., Johnson, C.M., and Beard, B.L., 2005. Archean to Middle Proterozoic evolution of Baltica subcontinental lithosphere: evidence from combined Sm-Nd and Lu-Hf isotope analyses of the Sandvik ultramafic body, Norway. Contributions to Mineralogy and Petrology 150, 131-145.], marking the time of separation from the convecting mantle. Lu-Hf whole rock and mineral isochron ages of constituent garnet peridotite and garnet pyroxenite layers in the Sandvik body reflect cooling and emplacement at ~ 1.25 Ga and ~ 1.18 Ga, respectively, whereas Sm-Nd whole rock and mineral ages of the garnet pyroxenite layers and the garnet peridotite are consistent with metasomatic alteration at ~ 1.15 Ga [Lapen, T.J., Medaris, L.G. Jr., Johnson, C.M., and Beard, B.L., 2005. Archean to Middle Proterozoic evolution of Baltica subcontinental lithosphere: evidence from combined Sm-Nd and Lu-Hf isotope analyses of the Sandvik ultramafic body, Norway. Contributions to Mineralogy and Petrology 150, 131-145.]. The isochron ages likely record lithospheric modification associated with the 1.25-1.00 Ga Sveconorwegian orogeny and represent the youngest age of the Stage 1 mineral assemblage equilibration. A 606 ± 39 Ma Sm-Nd isochron age of the Stage 2 kelyphite assemblage is consistent with partial re-equilibration of the porphyroclastic assemblage during continental rifting associated with opening of the Iapetus Ocean between Baltica and Laurentia at ~ 600 Ma, or extension between Baltica and Siberia that may have been associated with opening of the Ægir Sea. The age of kelyphite, therefore, places the Sandvik peridotite in the uppermost mantle prior to Silurian shortening between the Baltic and Laurentian continents.

Human exposure to trace elements through the skin by direct contact with clothing: Risk assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rovira, Joaquim; Environmental Engineering Laboratory, Departament d'Enginyeria Quimica, Universitat Rovira i Virgili, Av. Països Catalans 26, 43007 Tarragona, Catalonia; Nadal, Martí

Metals in textile products and clothing are used for many purposes, such as metal complex dyes, pigments, mordant, catalyst in synthetic fabrics manufacture, synergists of flame retardants, antimicrobials, or as water repellents and odour-preventive agents. When present in textile materials, heavy metals may mean a potential danger to human health. In the present study, the concentrations of a number of elements (Al, As, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Mo, Ni, Pb, Sb, Sc, Se, Sm, Sn, Sr, Tl, V, and Zn) were determined in skin-contact clothes. Analysed clothes were made of different materials,more » colours, and brands. Interestingly, we found high levels of Cr in polyamide dark clothes (605 mg/kg), high Sb concentrations in polyester clothes (141 mg/kg), and great Cu levels in some green cotton fabrics (around 280 mg/kg). Dermal contact exposure and human health risks for adult males, adult females, and for <1-year-old children were assessed. Non-carcinogenic and carcinogenic risks were below safe (HQ<1) and acceptable (<10{sup −6}) limits, respectively, according to international standards. However, for Sb, non-carcinogenic risk was above 10% of the safety limit (HQ>0.1) for dermal contact with clothes. - Highlights: • We determined in skin-contact clothes the concentrations of a number of metals. • Dermal contact exposure and health risks for adults and for 1-year-old children were assessed. • Carcinogenic risks were considered as acceptable (<10{sup −6}). • For non-carcinogenic risks, only Sb exceeded a 10% of the HQ for dermal contact with clothes.« less

The relationship between inadvertent ingestion and dermal exposure pathways: a new integrated conceptual model and a database of dermal and oral transfer efficiencies.

PubMed

Gorman Ng, Melanie; Semple, Sean; Cherrie, John W; Christopher, Yvette; Northage, Christine; Tielemans, Erik; Veroughstraete, Violaine; Van Tongeren, Martie

2012-11-01

Occupational inadvertent ingestion exposure is ingestion exposure due to contact between the mouth and contaminated hands or objects. Although individuals are typically oblivious to their exposure by this route, it is a potentially significant source of occupational exposure for some substances. Due to the continual flux of saliva through the oral cavity and the non-specificity of biological monitoring to routes of exposure, direct measurement of exposure by the inadvertent ingestion route is challenging; predictive models may be required to assess exposure. The work described in this manuscript has been carried out as part of a project to develop a predictive model for estimating inadvertent ingestion exposure in the workplace. As inadvertent ingestion exposure mainly arises from hand-to-mouth contact, it is closely linked to dermal exposure. We present a new integrated conceptual model for dermal and inadvertent ingestion exposure that should help to increase our understanding of ingestion exposure and our ability to simultaneously estimate exposure by the dermal and ingestion routes. The conceptual model consists of eight compartments (source, air, surface contaminant layer, outer clothing contaminant layer, inner clothing contaminant layer, hands and arms layer, perioral layer, and oral cavity) and nine mass transport processes (emission, deposition, resuspension or evaporation, transfer, removal, redistribution, decontamination, penetration and/or permeation, and swallowing) that describe event-based movement of substances between compartments (e.g. emission, deposition, etc.). This conceptual model is intended to guide the development of predictive exposure models that estimate exposure from both the dermal and the inadvertent ingestion pathways. For exposure by these pathways the efficiency of transfer of materials between compartments (for example from surfaces to hands, or from hands to the mouth) are important determinants of exposure. A database of transfer efficiency data relevant for dermal and inadvertent ingestion exposure was developed, containing 534 empirically measured transfer efficiencies measured between 1980 and 2010 and reported in the peer-reviewed and grey literature. The majority of the reported transfer efficiencies (84%) relate to transfer between surfaces and hands, but the database also includes efficiencies for other transfer scenarios, including surface-to-glove, hand-to-mouth, and skin-to-skin. While the conceptual model can provide a framework for a predictive exposure assessment model, the database provides detailed information on transfer efficiencies between the various compartments. Together, the conceptual model and the database provide a basis for the development of a quantitative tool to estimate inadvertent ingestion exposure in the workplace.

Process analysis of an in store production of knitted clothing

NASA Astrophysics Data System (ADS)

Buecher, D.; Kemper, M.; Schmenk, B.; Gloy, Y.-S.; Gries, T.

2017-10-01

In the textile and clothing industry, global value-added networks are widespread for textile and clothing production. As a result of global networking, the value chain is fragmented and a great deal of effort is required to coordinate the production processes [1]. In addition, the planning effort on the quantity and design of the goods is high and risky. Today the fashion industry is facing an increasing customer demand for individual and customizable products in addition to short delivery times [2]. These challenges are passed down to the textile and clothing industry decreasing batch sizes and production times. Conventional clothing production cannot fulfill those demands especially when combined with more and more individual or customizable designs. Hence new production concepts have to be developed.

[Methodic approaches to evaluation of microclimate at workplace, with application of various types of protective clothing against occupational hazards].

PubMed

Prokopenko, L V; Afanas'eva, R F; Bessonova, N A; Burmistrova, O V; Losik, T K; Konstantinov, E I

2013-01-01

Studies of heat state of human involved into physical work in heating environment and having various protective clothing on demonstrated value of the protective clothing in modifying thermal load on the body and possible decrease of this load through air temperature and humidity correction, shorter stay at workplace. The authors presented hygienic requirements to air temperatures range in accordance with allowable body heating degree, suggested mathematic model to forecast integral parameter of human functional state in accordance with type of protective clothing applied. The article also covers necessity of upper air temperature limit during hot season, for applying protective clothing made of materials with low air permeability and hydraulic conductivity.

48 CFR 252.225-7012 - Preference for certain domestic commodities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... States: (1) Food. (2) Clothing and the materials and components thereof, other than sensors, electronics, or other items added to, and not normally associated with, clothing and the materials and components thereof. Clothing includes items such as outerwear, headwear, underwear, nightwear, footwear, hosiery...