Science.gov

Sample records for co-traitement physico-chimique application

  1. Elaboration du Ge mesoporeux et etude de ses proprietes physico-chimiques en vue d'applications photovoltaiques

    NASA Astrophysics Data System (ADS)

    Tutashkonko, Sergii

    Le sujet de cette these porte sur l'elaboration du nouveau nanomateriau par la gravure electrochimique bipolaire (BEE) --- le Ge mesoporeux et sur l'analyse de ses proprietes physico-chimiques en vue de son utilisation dans des applications photovoltaiques. La formation du Ge mesoporeux par gravure electrochimique a ete precedemment rapportee dans la litterature. Cependant, le verrou technologique important des procedes de fabrication existants consistait a obtenir des couches epaisses (superieure a 500 nm) du Ge mesoporeux a la morphologie parfaitement controlee. En effet, la caracterisation physico-chimique des couches minces est beaucoup plus compliquee et le nombre de leurs applications possibles est fortement limite. Nous avons developpe un modele electrochimique qui decrit les mecanismes principaux de formation des pores ce qui nous a permis de realiser des structures epaisses du Ge mesoporeux (jusqu'au 10 mum) ayant la porosite ajustable dans une large gamme de 15% a 60%. En plus, la formation des nanostructures poreuses aux morphologies variables et bien controlees est desormais devenue possible. Enfin, la maitrise de tous ces parametres a ouvert la voie extremement prometteuse vers la realisation des structures poreuses a multi-couches a base de Ge pour des nombreuses applications innovantes et multidisciplinaires grace a la flexibilite technologique actuelle atteinte. En particulier, dans le cadre de cette these, les couches du Ge mesoporeux ont ete optimisees dans le but de realiser le procede de transfert de couches minces d'une cellule solaire a triple jonctions via une couche sacrificielle en Ge poreux. Mots-cles : Germanium meso-poreux, Gravure electrochimique bipolaire, Electrochimie des semi-conducteurs, Report des couches minces, Cellule photovoltaique

  2. Modèle mathématique pour l'étude des équilibres physico-chimiques de permanentes.

    PubMed

    Chiodi, F

    1989-12-01

    Résumé La plupart des permanentes du commerce sont constituées d'acide thioglycolique (éventuellement associéà l'acide thiolactique), neutralisé par l'ammoniac, elles sont additionnées de carbonate d'ammonium comme tampon. Le système peut etre traité comme la neutralisation d'un mélange d'acides thioglycolique et carbonique par l'ammoniac, et il est complètement défini par trois paramètres, trois concentrations, ou deux concentrations et le pH, ou trois paramètres analytiques indépendants. Les calculs théoriques de l'équilibre sont compliqués du fait qu'il s'agit de l'équilibre de deux diacides faibles neutralisés par une base faible. Un modèle mathématique développé exclusivement par des équations théoriques permet l'interprétation des équilibres et la réalisation des calculs fiable pour la préparation des formules remplissant certaines caractéristiques. Le modèle permet de réaliser facilement des simulations en faisant varier les concentrations, les acides (par la voie des constantes de dissociation) ou d'associer différents acids et/ou bases organiques ou minérales. Une application complémentaire du modèle est de tracer la courbe dérivée à la courbe de neutralisation et de cette façon mesurer l'effet tampon en différents points par la mesure de sa pente. Synopsis Mathematical model for the study of physico-chemical equilibria in permanent wave solutions Most waving lotions on the market are prepared with thioglycolic acid (eventually associated with thiolactic acid) neutralized with ammonium hydroxide and buffered with ammonium bicarbonate. The system can be treated as the neutralization of a mix of carbonic acid and thioglycolic acid by ammonia and it is completely defined by three parameters: three concentrations; or two concentrations and pH; or three independent analytical parameters. Theoretical calculations of the equilibrium are difficult because the equilibrium involves at least two weak acids with a weak base

  3. La physique des bulles de champagne Une première approche des processus physico-chimiques liés à l'effervescence des vins de Champagne

    NASA Astrophysics Data System (ADS)

    Liger-Belair, G.

    2002-07-01

    bubbles collapsing at a free surface. But, to the best of our knowledge, and surprising as it may seem, no results concerning the collateral effects on adjoining bubbles of bubbles collapsing in a bubble monolayer have been reported up to now. Actually, effervescence in a glass of champagne ideally lends to a preliminary work with bubbles collapsing in a bubble monolayer. For a few seconds after pouring, the free surface is completely covered with a monolayer composed of quite monodisperse millimetric bubbles collapsing close to each others. We took high-speed photographs of the situation which immediately follows the rupture of a bubble cap in a bubble monolayer. Adjoining bubbles were found to be literally sucked and strongly stretched toward the lowest part of the cavity left by the bursting bubble, leading to unexpected and short-lived flower-shaped structures. Stresses in distorted bubbles (petals of the flower-shaped structure) were evaluated and found to be, at least, one order of magnitude higher than stresses numerically calculated in the boundary layer around an isolated single millimetric collapsing bubble. This is a brand-new and slightly counter-intuitive result. While absorbing the energy released during collapse, as an air-bag would do, adjoining bubble caps store this energy into their thin liquid film, leading finally to stresses much higher than those observed in the boundary layer around single millimetric collapsing bubbles. Further investigation should be conducted now, and especially numerically, in order to better understand the relative influence of each pertinent parameters (bubble size, liquid density and viscosity, effect of surfactant...) on bubble deformation. L'objectif général de cet ouvrage consacré à l'étude des processus physico- chimiques de l'effervescence des vins de Champagne était de décortiquer les différentes étapes de la vie d'une bulle de champagne en conditions réelles de consommation, dans une flûte. Nous r

  4. Étude physico-chimique des réactions entre oxydes d'azote Application à l'analyse de ces gaz en sortie de systèmes de combustion

    NASA Astrophysics Data System (ADS)

    Leblanc, E.; Jokela, K.; Perier-Camby, L.; Thomas, G.

    1999-05-01

    Analysing gaseous nitrogen oxides emissions at the combustion system outlet (exhaust pipe, central heating, glass kiln,...) are a current environmental topic. Yet, studying these pollutant involves two difficulties : first a great number of NOx do exist, and secondly the system can shift quickly. The objective of this work consists of examining results of literature and studying more specially NO/NO2/O2 system to clarify these problems. For this purpose theoretical and experimental works concerning kinetics and thermodynamics of NOx transformations have been carried out. The NOx maximum starting concentration reaches 1000 ppm in an oxygen-containing atmosphere and with temperature comprised between 25 circC and 1000 circC. These parameters are representative of real combustion conditions. An apparatus has been built to determine both experimental equilibrium and kinetic constants for the reaction 2 NO + O2 = 2 NO2. Rate constants have been measured for temperature lower than 300 circC. Above 300 circC, the catalytic influence of the reactor walls has been clearly established. For each temperature, NOx concentrations at equilibrium give experimental thermodynamic data, in agreement with the theoretical approach. Analyser les émanations d'oxydes d'azote gazeux issus des systèmes de combustion (moteurs automobiles, chauffage urbain, fours de verreries,...) constitue un objectif actuel de recherche concernant l'environnement. L'étude de ces polluants présente une double difficulté. D'une part, ils existent sous de multiples formes, d'autre part de nombreux facteurs viennent influer sur la vitesse de transformation de ces gaz (température, géométrie et nature du réacteur, temps,...). Ce travail a été mené pour effectuer une mise au point des recherches sur le sujet et étudier plus particulièrement aux niveaux thermodynamique et cinétique le mélange gazeux NO/NO2/O2. Un dispositif a été mis au point afin de mesurer expérimentalement les vitesses de réaction pour des paramètres expérimentaux représentatifs des atmosphères générées par les systèmes de combustion (teneur en NOx : 1000 ppm, présence d'oxygène, température comprise entre 25 circC et 1000 circC). Les constantes cinétiques ont ainsi été déterminées pour des températures inférieures à 300 circC. L'influence catalytique de la paroi du réacteur a été mise en évidence au delà de cette température. Les valeurs concernant les équilibres thermodynamiques entre les NOx ont également pu être validées expérimentalement.

  5. Proceedings of the International Symposium on the Application of Fundamental Theory to Problems of Biology and Pharmacology, Volume 70 No. 6

    DTIC Science & Technology

    2007-11-02

    Technion, Haifa, Israel John A. Pople Northwestern University at Evanston, Illinois, USA Alberte Pullman Institut de Biologie Physico - Chimique ...University at Evanston, Illinois, USA Alberte Pullman Institut de Biologie Physico - Chimique , Paris, France Paul von Rague Schleyer Universität...Seattle, USA Sten Rettrup H. C. ßrsted Institut, Copenhagen, Denmark C. Magnus L Rittby 7exas Christian University at Fort Worth, USA Michael Robb

  6. International Journal of Quantum Chemistry, Quantum Biology Symposium No. 24. Proceedings of the International Symposium on the Application of Fundamental Theory to Problems of Biology and Pharmacology, Held at Ponce de Leon Resort, St. Augustine, Florida on March 1-7, 1997. Volume 65, No. 6, 1997.

    DTIC Science & Technology

    1997-03-01

    Technion, Haifa, Israel John A. Pople Northwestern University at Evanston, Illinois, USA Alberte Pullman Institut de Biologie Physico - Chimique , Paris...Institut de Biologie Physico - Chimique , Paris, France Paul von Raguö Schleyer Universität Erlangen-Nürnberg, Erlangen, Germany Harrison Shull Naval...Au William Reinhardt University of Washington at Sean Sten Rettrup H. C. Orsted Institut, Copenhagen C. Magnus L Rittby Texas Christian

  7. Influence de l'alteration physique sur les caracteristiques physico-chimiques de monolithes de sols contamines traites par stabilisation/solidification au ciment

    NASA Astrophysics Data System (ADS)

    Remillard, Jonathan

    The concern of contaminated sites is affecting millions of property owner worldwide. As they pose a risk to the environment, human health or impair the value of buildings, remediation of contaminated sites has become an everyday issue. Stabilization/solidification (S/S) of contaminated soils with cement is a remediation technology that was developed to confine contaminants that cannot be degraded biologically, chemically or thermally by other technologies. Soils treated with S/S form a monolith that can be valorized on site. However, this practice is fairly uncommon in Quebec and this reluctance is partly due to the risks of degradation of the monoliths and the lack of knowledge relative to the long-term behavior of altered monoliths. The objective of this project was to simulate these degradations on cement-based monoliths of contaminated soils treated with S/S technology by causing physical alterations using different cycles of freeze/thawing and drying/wetting, and then to study the impact of these alterations on the mass losses, compressive strength, hydraulic conductivity, pH and leachability of five trace metals (Cd, Cr, Cu, Pb and Zn) used as contaminants. Various processes of S/S have been studied, either cement contents of 15 and 20%, then the presence of 5% by weight of calcium carbonate. For each S/S process formulated, the freeze/thaw cycles were much more effective in physically altering the monoliths. These alterations were mainly reflected by lower compressive strength, even more with lower cement contents. For their part, the drying/wetting cycles rather created a chemical change that lowered the pH of the monoliths. These chemical changes also affected the interpretation of leaching test results, especially for copper and zinc, since it was difficult to attribute effects to either physical or chemical alterations. The results showed that only chromium leached more clearly in response to physical alterations. All other elements studied were little affected, even though some samples were highly altered. This demonstrates that in some cases, damages may have little impact on long-term performance of the monoliths in terms of contaminant immobilization. However, integrating the study of long-term behaviors of monoliths in a process of formulation for contaminated soil treatment with S/S can become paramount, as seen for chromium in this present study. Keywords: stabilization / solidification, deterioration, alteration, leachability, contaminants.

  8. New Light Alloys (Les Nouveaux Alliages Legers)

    DTIC Science & Technology

    1990-09-01

    LEPETITCORPS, Caract(risation physico - chimique et m~canique de filaments CVD de carbure de silicium ou de bore - Application aux mat riaux composites ID...stress intensity factor where the plastic zone size is of the order of the grain size of the alloy and seems to be maximised for the T- L stressing...transverse fracture toughness is not so clearly satisfactory however. Whilst acceptable levels of S- L fracture toughness in excess of 18 MPaJm have

  9. Caractérisation physico-chimique et étude du frittage d'une argile destinée à l'élaboration de membranes de filtration tangentielle

    NASA Astrophysics Data System (ADS)

    Lahsini, A.; Bentama, J.; Addaou, A.; Rafiq, M.

    1998-05-01

    The tangential filtration processes are nowadays acknowleged as the separation of high performance techniques from the laboratory to the industrial production. The basic aspect of those techniques is the membrane. The aim of the present work is to obtain the membrane of clay at a low price. The results obtained enabel us to understand the clay thermal behaviour relatively to the heat imposed treatement and to conclude that clay membrane can be used both in tangential microfiltration or support of ultrafiltration. Les procédés de filtration tangentielle sont actuellement reconnus comme des techniques de séparation de haute performance depuis le laboratoire jusqu'à la production industrielle. le cur de ces techniques est la membrane. Le présent travail a pour objectif de mettre au point des membranes en argile à bas prix de revient. Les résultats obtenus ont permis de comprendre le comportement de l'argile vis-à-vis des cycles thermiques imposés et de conclure que les membranes argileuses peuvent être utilisées en microfiltration et support en ultrafiltration tangentielle.

  10. International Journal of Quantum Chemistry. Quantum Chemistry Symposium Number 27: Proceedings of the International Symposium on Atomic, Molecular, and Condensed Matter Theory and Computational Methods Held in St. Augustine, Florida on 13-20 March 1993

    DTIC Science & Technology

    1993-03-20

    LAVERY Brazil Institut de Biologie Physico - Chimique Lab de Biochimie Theorique GILDA LOEW 13. Rue Pierre et Marie Curie Molecular Research Institute Paris...Chicago, IL 60637 ALBERTE PULLMAN Institut de Biologie Physico - Chimique JOHN ROSENBERG 13, rue Pierre et Marie Curie University of Pittsburgh Paris...75005 Biological Sciences Dept France A-234 Langley Hall Pittsburgh, PA 15260 BERNARD PULLMAN Institut de Biologic Physico - Chimique KLAUS RUEDENBERG 13

  11. Étude de la variation spatio-temporelle des paramètres physico-chimiques caractérisant la qualité des eaux d'une lagune côtière et ses zonations écologiques : cas de Moulay Bousselham, Maroc

    NASA Astrophysics Data System (ADS)

    Labbardi, Hanane; Ettahiri, Omar; Lazar, Said; Massik, Zakia; El Antri, Said

    2005-04-01

    Our interest is related to the hydrological characteristics of the Moulay Bousselham lagoon. Water samples were taken monthly from July 2001 to June 2002 in 15 stations distributed along the lagoon. The various measured hydrological parameters (temperature, salinity, suspended matter, chlorophyll a) showed significant monthly variations ( p<0.001), whereas spatially among all sampled stations, only the salinity showed significant variations. The variability analysis approached by the analysis of the normalized principal components combined with discriminate analysis showed very small inter-stations variability. Its percentage is 11% and 9% of the total variance during high and low tide, respectively. To cite this article: H. Labbardi et al., C. R. Geoscience 337 (2005).

  12. Aerospace Materials Process Modelling

    DTIC Science & Technology

    1988-08-01

    des phdnombnes physico - chimiques , slors sal connus, notamment des rdactions do phase as produisant dana l intorvalle do solidification, par des...connaissance do donndos theraiques, sinai qua du comportement e~canique, physico - chimique at mdtaliurgique des pibees & order maim aussi des moules. des...W.T.Sbs 16 A NUMERICAL MODEL OF DIRECTIONAL SOLIDIFICATION OF CAST TURBINE BLADES by G,.Lammndu and L -Veruiot des Roches 17 Paper IS withdrawn Pape 19

  13. Applications

    NASA Astrophysics Data System (ADS)

    Stern, Arthur M.

    1986-07-01

    Economic incentives have spurred numerous applications of genetically engineered organisms in manufacture of pharmaceuticals and industrial chemicals. These successes, involving a variety of methods of genetic manipulation, have dispelled early fears that genetic engineering could not be handled safely, even in the laboratory. Consequently, the potential for applications in the wider environment without physical containment is being considered for agriculture, mining, pollution control, and pest control. These proposed applications range from modest extensions of current plant breeding techniques for new disease-resistant species to radical combinations of organisms (for example, nitrogen-fixing corn plants). These applications raise concerns about potential ecological impacts (see chapter 5), largely because of adverse experiences with both deliberate and inadvertent introductions of nonindigenous species.

  14. Modelling of Molecular Structures and Properties in Physical Chemistry and Biophysics, Forty-Fourth International Meeting (Modelisation des Structures et Proprietes Moleculaires en Chimie Physique et en Biophysique, Quarante- Quatrieme Reunion Internationale)

    DTIC Science & Technology

    1989-09-01

    Verlaao, NE-i York, 1970 7 .H.nhh- , ltrvi’otric. Calr:iluls, Cambridne vi.~srn~~ L - ,.... 23 CLASSIFICATION DE MOLECULES CHIMIQUES :PRESENTATION D’*UNE...described. 34 Base Sequence Effects and Transitions in DNA Richard Lavery Institut de Biologie Physico - Chimique 13, rue Pierre et Marie Curie Paris...Ddparternent de Biologie. CEN-Saciay. Gif-sur-Yvette 2Laboratoire d’Enzvmoiogie Physico - Chimique et Mol~culaire. Bat 430. Universitd Paris-Sud. 91-03

  15. Traitement superficiel d'acier par laser excimère

    NASA Astrophysics Data System (ADS)

    Pereira, A.; Cros, A.; Delaporte, Ph.; Marine, W.; Sentis, M.

    2003-06-01

    Motivée par des nécessités économiques et environnementales, l'industrie est amenée à développer de nouveaux procédés propres, notamment pour les applications concernant la préparation de surface (nettoyage, décapage...). Dans ce domaine, l'utilisation du laser excinière présente de nombreux avantages. En effet, en raison d'un temps d'interaction de courte durée (ns), suivi d'un échauffement et d'un refroidissement rapide de la zone irradiée sur une profondeur très fine (μm), il est possible de modifier localement les propriétés physico-chimiques d'une surface sans changer les propriétés intrinsèques du matériau. Le but de nos travaux a consisté en l'étude des effets d'un traitement par laser excimère (XeCI) sur les propriétés chimiques (XPS et AES), structurales (XRD et GIXRD) et morphologiques (MEB) de surface d'acier. Outre le nettoyage de la surface, les analyses chimiques réalisées sur de l'acier ont mis en évidence pour des densités d'énergie importantes la formation d'une couche de Fe2O3 au détriment de FeOOH. Les observations MEB ont révélé la création de structures sphériques nanométriques. Ce traitement permet notamment d'améliorer la tenue à la corrosion de la surface.

  16. Dissolution de la matiere lignocellulosique dans les liquides ioniques

    NASA Astrophysics Data System (ADS)

    Rebiere, Jeremy

    De nos jours, avec la raréfaction des ressources fossiles, le développement de procédés entrant dans le cadre de la chimie verte s'accentue. De plus, ces procédés utilisent comme ressources, des matériaux d'origine végétale, abondants et biodégradables. Au cours de ces 20 dernières années, la littérature utilisant les liquides ioniques (LI) connait une importante croissance. Ces solvants sont de plus en plus employés dans des réactions chimiques classiques. Cependant le coût de leur synthèse en fait un solvant réactionnel cher dont l'application en tant que tel dans l'industrie ne peut être raisonnablement envisagée. Ces liquides ioniques permettent la dissolution des matériaux lignocellulosiques (lignine ou cellulose) et possèdent des propriétés physico-chimiques intéressantes. Nous savons également que la dissolution de la cellulose par des procédés d'hydrolyse classique s'effectue dans des conditions dures, dues à la structure cristalline de la cellulose, (fortes concentrations en acide) qui paraissent limitées pour une utilisation à grande échelle. Il est donc nécessaire de rechercher des méthodes moins onéreuses et plus efficaces écologiquement. S'appuyant sur des recherches démontrant que la dissolution de la cellulose dans les LI, diminue la cristallinité de la cellulose, nous allons chercher à démontrer au cours de ces travaux, la possibilité d'utiliser les LI comme moyen de prétraitement pour la dissolution de la cellulose. Nous allons nous attacher à dissoudre la cellulose, et à étudier les proportions pouvant être dissoutes. Puis nous chercherons à récupérer puis à réutiliser ces LI. Enfin nous cherchons à caractériser les modifications apportées à notre cellulose. Mots Clés liquide ionique, cellulose, cristallinité, réactivité, dissolution, régénération, non-solvant, purification, prétraitement, zone amorphe.

  17. Studies on the Time Course of Salinity and Temperature Adaptation in the Commercial Brown Shrimp Penaeus aztecus Ives.

    DTIC Science & Technology

    1977-09-01

    M. 1925. Recherches physico - chimiques et physiologiques sur le milieu interieur des animaux aquatiques. Modifications sous 1’influence du...conditions for salinity adaptation. The test salinities were 2, 5, 10, 15, 25 and "Sfr0^, (Continued) 5 DO IJSMI M73 L «"no« or » NOV •• • OMOLETC...report were BG E. D. Peixotto, CE, COL G. H. Hilt, CE, and COL John L . Cannon, CE. Technical Director was Mr. F. R. Brown. ,. ,.. I

  18. Combustion Instabilities in Liquid-Fuelled Propulsion Systems: Conference Proceedings of the Propulsion and Energetics Panel (72nd) B specialists Meeting Held in Bath (England) on 6-7 October 1988

    DTIC Science & Technology

    1989-04-01

    31. l , Iutespre+ +with a Tiat •". 19 13 ¢ýww Iet+v %a+, , .. ot Va 5s•.Siw•ltdig MnW Cttnt.. sla• ..... ". C Metho. a(.f A#ty*t A . 41- Analyses ...phtnomatnes physico - chimiques pris en compte eat donn~eeat les premiers r~sulAts nomeriques obtenus sont compares avec les informations provenant de calculs...Docteur Inghnleur. (21] POINSOT, T.- Analyse des Instabilit~s de Combustion de Foyers Turbulents Pr~snhlangfs, Th~se d’Etat de l ~niversit6 de Paris Sud

  19. Synthesis and infrared properties of ethylenedioxythiophene and octylthiophene based copolymers

    NASA Astrophysics Data System (ADS)

    Buvat, P.; Hourquebie, P.

    1998-06-01

    The control of the structural parameters and doping conditions of PATs lead to quasi-metallic materials. We have developed the synthesis of copolymers and PAT to enhance the metallic properties with conservation of the solubility. Le contrôle des paramètres physico-chimiques des PATs et des conditions de dopage conduit à des matériaux quasi-métalliques. Nous nous sommes ici orientés vers des copolymères du PEDOT et des PATs pour augmenter le caractère métallique tout en conservant les propriétés de solubilité.

  20. Biomedical Applications

    NASA Astrophysics Data System (ADS)

    Méndez, Vicenç; Fedotov, Sergei; Horsthemke, Werner

    Reaction-transport equations have found many applications to biological processes of interest in medicine and microbiology. Examples range from cancer invasion to virus dispersal and transport in spiny dendrites.

  1. Rejected applications

    PubMed Central

    2014-01-01

    Objective: To review membership application materials (especially rejected applications) to the American Academy of Neurology (AAN) during its formative years (1947–1953). Methods: Detailed study of materials in the AAN Historical Collection. Results: The author identified 73 rejected applications. Rejected applicants (71 male, 2 female) lived in 25 states. The largest number was for the Associate membership category (49). These were individuals “in related fields who have made and are making contributions to the field of neurology.” By contrast, few applicants to Active membership or Fellowship status were rejected. The largest numbers of rejectees were neuropsychiatrists (19), neurosurgeons (16), and psychiatrists (14). Conclusion: The AAN, established in the late 1940s, was a small and politically vulnerable organization. A defining feature of the fledgling society was its inclusiveness; its membership was less restrictive than that of the older American Neurological Association. At the same time, the society needed to preserve its core as a neurologic society rather than one of psychiatry or neurosurgery. Hence, the balance between inclusiveness and exclusive identity was a difficult one to maintain. The Associate membership category, more than any other, was at the heart of this issue of self-definition. Associate members were largely practitioners of psychiatry or neurosurgery. Their membership was a source of consternation and was to be carefully been held in check during these critical formative years. PMID:24944256

  2. ASCI applications

    SciTech Connect

    Nowak, D.A.; Christensen, R.C.

    1997-11-11

    ASCI applications codes are key elements of the Department of Energy`s Stockpile Stewardship and Management Program (SSMP). They will provide the simulation capabilities needed to predict the performance, safety, reliability, and manufacturability of the U.S. nuclear deterrent.

  3. Application note :

    SciTech Connect

    Russo, Thomas V.

    2013-08-01

    The development of the XyceTM Parallel Electronic Simulator has focused entirely on the creation of a fast, scalable simulation tool, and has not included any schematic capture or data visualization tools. This application note will describe how to use the open source schematic capture tool gschem and its associated netlist creation tool gnetlist to create basic circuit designs for Xyce, and how to access advanced features of Xyce that are not directly supported by either gschem or gnetlist.

  4. Photography applications

    USGS Publications Warehouse

    Cochran, Susan A.; Goodman, James A.; Purkis, Samuel J.; Phinn, Stuart R.

    2013-01-01

    Photographic imaging is the oldest form of remote sensing used in coral reef studies. This chapter briefly explores the history of photography from the 1850s to the present, and delves into its application for coral reef research. The investigation focuses on both photographs collected from low-altitude fixed-wing and rotary aircraft, and those collected from space by astronauts. Different types of classification and analysis techniques are discussed, and several case studies are presented as examples of the broad use of photographs as a tool in coral reef research.

  5. Medical Applications

    NASA Astrophysics Data System (ADS)

    Boccara, A. Claude; Mordon, Serge

    2015-10-01

    In re-listening to the lectures of Charles Townes shortly after the invention of the laser (e.g., in the Boston Science Museum), one can already have a realistic vision of the potentialities of this new tool in the field of medical therapy, as evidenced by the use of the laser in ophthalmology to cure retinal detachment in the 1960's. Since then, applications have flourished in the domain of therapy. We will thus illustrate here only some of the main fields of application of medical lasers. On the opposite, the use of lasers in medical imaging is, with one exception in ophthalmology, still at the development level. It is becoming a diagnostic tool in addition to high performance imaging facilities that are often very expensive (such as CT scan, Magnetic Resonance Imaging (MRI) and nuclear imaging). Even if progress is sometimes slow, one can now image with light inside the human body, in spite of the strong scattering of light by tissues, in the same way as a pathologist sees surgical specimens.

  6. BPPD Internal Application Checklists

    EPA Pesticide Factsheets

    EPA, Office of Pesticide Programs, BPPD internal application checklists for internal guidance to assist BPPD employees in their evaluation of applications submitted to BPPD by applicants and/or registrants.

  7. Aerospace Applications of Microprocessors

    NASA Technical Reports Server (NTRS)

    1980-01-01

    An assessment of the state of microprocessor applications is presented. Current and future requirements and associated technological advances which allow effective exploitation in aerospace applications are discussed.

  8. Sight Application Analysis Tool

    SciTech Connect

    Bronevetsky, G.

    2014-09-17

    The scale and complexity of scientific applications makes it very difficult to optimize, debug and extend them to support new capabilities. We have developed a tool that supports developers’ efforts to understand the logical flow of their applications and interactions between application components and hardware in a way that scales with application complexity and parallelism.

  9. Ruby on Rails Applications

    NASA Technical Reports Server (NTRS)

    Hochstadt, Jake

    2011-01-01

    Ruby on Rails is an open source web application framework for the Ruby programming language. The first application I built was a web application to manage and authenticate other applications. One of the main requirements for this application was a single sign-on service. This allowed authentication to be built in one location and be implemented in many different applications. For example, users would be able to login using their existing credentials, and be able to access other NASA applications without authenticating again. The second application I worked on was an internal qualification plan app. Previously, the viewing of employee qualifications was managed through Excel spread sheets. I built a database driven application to streamline the process of managing qualifications. Employees would be able to login securely to view, edit and update their personal qualifications.

  10. CYBER 200 Applications Seminar

    NASA Technical Reports Server (NTRS)

    Gary, J. P. (Compiler)

    1984-01-01

    Applications suited for the CYBER 200 digital computer are discussed. Various areas of application including meteorology, algorithms, fluid dynamics, monte carlo methods, petroleum, electronic circuit simulation, biochemistry, lattice gauge theory, economics and ray tracing are discussed.

  11. RHC Technologies and Applications

    EPA Pesticide Factsheets

    This page provides a portal to learning about several of the most common types of renewable heating and cooling technologies and end use applications. A clickable diagram compares technologies and applications with respect to their working temperatures.

  12. EPA Geospatial Applications

    EPA Pesticide Factsheets

    EPA has developed many applications that allow users to explore and interact with geospatial data. This page highlights some of the flagship geospatial web applications but these represent only a fraction of the total.

  13. Entomopathogenic nematode application technology

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Biocontrol success when using entomopathogenic nematodes (EPNs) in the genera Heterorhabditis and Steinernema relies on a variety of factors including components of the application event itself. Successful application encompasses both abiotic and biotic influences. For example, adverse array of equi...

  14. Industrial storage applications overview

    NASA Technical Reports Server (NTRS)

    Duscha, R. A.

    1980-01-01

    The implementation of a technology demonstration for the food processing industry, development and technology demonstrations for selected near-term, in-plant applications and advanced industrial applications of thermal energy storage are overviewed.

  15. Parts application handbook study

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The requirements for a NASA application handbook for standard electronic parts are determined and defined. This study concentrated on identifying in detail the type of information that designers and parts engineers need and expect in a parts application handbook for the effective application of standard parts on NASA projects.

  16. Inertial MEMS System Applications

    DTIC Science & Technology

    2010-03-01

    Inertial MEMS System Applications N. Barbour, R. Hopkins, A. Kourepenis, P. Ward The Charles Stark Draper Laboratory (P-4993) 555 Technology...driven by gun-launched projectile requirements. The application of silicon MEMS inertial technology to competent munitions efforts began in the early...requirements. These applications have a unique combination of requirements including, performance over temperature, high-g launch survivability, fast

  17. Application Portable Parallel Library

    NASA Technical Reports Server (NTRS)

    Cole, Gary L.; Blech, Richard A.; Quealy, Angela; Townsend, Scott

    1995-01-01

    Application Portable Parallel Library (APPL) computer program is subroutine-based message-passing software library intended to provide consistent interface to variety of multiprocessor computers on market today. Minimizes effort needed to move application program from one computer to another. User develops application program once and then easily moves application program from parallel computer on which created to another parallel computer. ("Parallel computer" also include heterogeneous collection of networked computers). Written in C language with one FORTRAN 77 subroutine for UNIX-based computers and callable from application programs written in C language or FORTRAN 77.

  18. Engineering electrochemical capacitor applications

    NASA Astrophysics Data System (ADS)

    Miller, John R.

    2016-09-01

    Electrochemical capacitor (EC) applications have broadened tremendously since EC energy storage devices were introduced in 1978. Then typical applications operated below 10 V at power levels below 1 W. Today many EC applications operate at voltages approaching 1000 V at power levels above 100 kW. This paper briefly reviews EC energy storage technology, shows representative applications using EC storage, and describes engineering approaches to design EC storage systems. Comparisons are made among storage systems designed to meet the same application power requirement but using different commercial electrochemical capacitor products.

  19. SNS application programming plan.

    SciTech Connect

    Chu, C. M.; Galambos, J. D.; Wei, J.; Allen, C.; McGehee, P. M.; Malitsky, N.

    2001-01-01

    The plan for Spallation Neutron Source accelerator physics application programs is presented. These high level applications involve processing and managing information from the diagnostic instruments, the machine control system, models and static databases and will be used to investigate and control beam behavior. Primary components include an SNS global database and Java-based XAL Application Toolkit. A key element in the SNS application programs is time synchronization of data used in these applications, due to the short pulse (1 ms), pulsed (60 Hz) nature of the device. The data synchronization progress is also presented.

  20. Biopharmaceutical applications of nanogold

    PubMed Central

    Alanazi, Fars K.; Radwan, Awwad A.; Alsarra, Ibrahim A.

    2010-01-01

    The application of nanogold in biopharmaceutical field is reviewed in this work. The properties of nanogold including nanogold surface Plasmon absorption and nanogold surface Plasmon light scattering are illustrated. The physical, chemical, biosynthesis methods of nanogold preparation are presented. Catalytic properties as well as biomedical applications are highlighted as one of the most important applications of nanogold. Biosensing, and diagnostic and therapeutic applications of gold nanoparticles are evaluated. Moreover, gold nanoparticles in drugs, biomolecules and proteins’ delivery are analyzed. Gold nanoparticles for the site-directed photothermal applications are reviewed as the most fruitful research area in the future. PMID:24936133

  1. ERIP application instructions

    SciTech Connect

    Watt, D.M.

    1992-01-02

    This report provides background information and instructions to assist applicants in writing Energy-Related Inventions Program (ERIP) applications. Initial feedback fro usage for the new instructions shows that the best instructions would not be read and followed by all applicants. Applications from more than thirty applicants who have received the new instructions indicated that few had read the instructions. Based on this feedback, the instructions have been further revised to include a title page and table of contents. A warning was also added to advise applicants of the potential penalty of delayed review if these instructions are not followed. This revision was intended to address the possibility that some applicants did not see or bother to follow the instructions which followed the background information about ERIP. Included are two examples of ERIP applications which have been prepared for handout at workshops or mailing to applicants. Writing of example applications was time consuming and more difficult than expected for several reasons: (1) Full disclosures can be lengthy, very detailed, and technical. This contrasts with the desire to prepare examples which are comparatively short and easy for the non-technical person to read. (2) Disclosures contain confidential information which should not be published. (3) It is difficult to imagine that applicants will study examples when they do not bother to read the basic instructions.

  2. Technical applications of aerogels

    SciTech Connect

    Hrubesh, L.W.

    1997-08-18

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  3. Irregular Applications: Architectures & Algorithms

    SciTech Connect

    Feo, John T.; Villa, Oreste; Tumeo, Antonino; Secchi, Simone

    2012-02-06

    Irregular applications are characterized by irregular data structures, control and communication patterns. Novel irregular high performance applications which deal with large data sets and require have recently appeared. Unfortunately, current high performance systems and software infrastructures executes irregular algorithms poorly. Only coordinated efforts by end user, area specialists and computer scientists that consider both the architecture and the software stack may be able to provide solutions to the challenges of modern irregular applications.

  4. Exploiting chaos for applications

    SciTech Connect

    Ditto, William L.; Sinha, Sudeshna

    2015-09-15

    We discuss how understanding the nature of chaotic dynamics allows us to control these systems. A controlled chaotic system can then serve as a versatile pattern generator that can be used for a range of application. Specifically, we will discuss the application of controlled chaos to the design of novel computational paradigms. Thus, we present an illustrative research arc, starting with ideas of control, based on the general understanding of chaos, moving over to applications that influence the course of building better devices.

  5. Application Layer Multicast

    NASA Astrophysics Data System (ADS)

    Allani, Mouna; Garbinato, Benoît; Pedone, Fernando

    An increasing number of Peer-to-Peer (P2P) Internet applications rely today on data dissemination as their cornerstone, e.g., audio or video streaming, multi-party games. These applications typically depend on some support for multicast communication, where peers interested in a given data stream can join a corresponding multicast group. As a consequence, the efficiency, scalability, and reliability guarantees of these applications are tightly coupled with that of the underlying multicast mechanism.

  6. LANL application communication patterns

    SciTech Connect

    Pakiin, Scott

    2011-01-10

    This brief presentation describes the communication patterns used by a set of unclassified applications developed at Los Alamos National Laboratory: XNobel/XRAGE/RAGE/SAGE, Krak, Sweep3D, and Partisn. It mentions which processes communicate with which other processes, whether the application is typically run in a strong-scaling mode or a weak-scaling mode, what message sizes are commonly used, and how the application's performance changes at scale.

  7. Application Power Signature Analysis

    SciTech Connect

    Hsu, Chung-Hsing; Combs, Jacob; Nazor, Jolie; Santiago, Fabian; Thysell, Rachelle; Rivoire, Suzanne; Poole, Stephen W

    2014-01-01

    The high-performance computing (HPC) community has been greatly concerned about energy efficiency. To address this concern, it is essential to understand and characterize the electrical loads of HPC applications. In this work, we study whether HPC applications can be distinguished by their power-consumption patterns using quantitative measures in an automatic manner. Using a collection of 88 power traces from 4 different systems, we find that basic statistical measures do a surprisingly good job of summarizing applications' distinctive power behavior. Moreover, this study opens up a new area of research in power-aware HPC that has a multitude of potential applications.

  8. 76 FR 60836 - Applicants

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-30

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION... applicants have filed with the Federal Maritime Commission an application for a license as a Non-Vessel... Intermediaries, Federal Maritime Commission, Washington, DC 20573, by telephone at (202) 523-5843 or by e-mail...

  9. Application Security Automation

    ERIC Educational Resources Information Center

    Malaika, Majid A.

    2011-01-01

    With today's high demand for online applications and services running on the Internet, software has become a vital component in our lives. With every revolutionary technology comes challenges unique to its characteristics; for online applications, security is one huge concern and challenge. Currently, there are several schemes that address…

  10. Aerospace applications of batteries

    NASA Technical Reports Server (NTRS)

    Habib, Shahid

    1993-01-01

    NASA has developed battery technology to meet the demanding requirements for aerospace applications; specifically, the space vacuum, launch loads, and high duty cycles. Because of unique requirements and operating environments associated with space applications, NASA has written its own standards and specifications for batteries.

  11. Network aware distributed applications

    SciTech Connect

    Agarwal, Deborah; Tierney, Brian L.; Gunter, Dan; Lee, Jason; Johnston, William

    2001-02-04

    Most distributed applications today manage to utilize only a small percentage of the needed and available network bandwidth. Often application developers are not aware of the potential bandwidth of the network, and therefore do not know what to expect. Even when application developers are aware of the specifications of the machines and network links, they have few resources that can help determine why the expected performance was not achieved. What is needed is a ubiquitous and easy-to-use service that provides reliable, accurate, secure, and timely estimates of dynamic network properties. This service will help advise applications on how to make use of the network's increasing bandwidth and capabilities for traffic shaping and engineering. When fully implemented, this service will make building currently unrealizable levels of network awareness into distributed applications a relatively mundane task. For example, a remote data visualization application could choose between sending a wireframe, a pre-rendered image, or a 3-D representation, based on forecasts of CPU availability and power, compression options, and available bandwidth. The same service will provide on-demand performance information so that applications can compare predicted with actual results, and allow detailed queries about the end-to-end path for application and network tuning and debugging.

  12. Applications of Solubility Data

    ERIC Educational Resources Information Center

    Tomkins, Reginald P. T.

    2008-01-01

    This article describes several applications of the use of solubility data. It is not meant to be exhaustive but rather to show that knowledge of solubility data is required in a variety of technical applications that assist in the design of chemical processes. (Contains 3 figures and 1 table.)

  13. Automatic multiple applicator electrophoresis

    NASA Technical Reports Server (NTRS)

    Grunbaum, B. W.

    1977-01-01

    Easy-to-use, economical device permits electrophoresis on all known supporting media. System includes automatic multiple-sample applicator, sample holder, and electrophoresis apparatus. System has potential applicability to fields of taxonomy, immunology, and genetics. Apparatus is also used for electrofocusing.

  14. NASA Applications Data Service

    NASA Technical Reports Server (NTRS)

    Brown, L. E.

    1979-01-01

    The NASA Applications Data Service (ADS), which is being developed to provide timely, affordable access to readily usable multisource data products and services for NASA-affliliated space-technology applications researchers, is presented. The system concept of a decentralized information network, which retrieves data from existing data bases and provides it to the user, has been adopted, and feasibility studies of the compatibility of the ADS with other existing or planned network data systems are under way. Other current efforts include the definition of the requirements and services necessary to support NASA applications experiments and encourage private industry to design the system and commercially implement it, as well as applications scenarios support, commercialization potential, standards identification, and concept justification with respect to future applications missions.

  15. Stirling engine application study

    NASA Technical Reports Server (NTRS)

    Teagan, W. P.; Cunningham, D.

    1983-01-01

    A range of potential applications for Stirling engines in the power range from 0.5 to 5000 hp is surveyed. Over one hundred such engine applications are grouped into a small number of classes (10), with the application in each class having a high degree of commonality in technical performance and cost requirements. A review of conventional engines (usually spark ignition or Diesel) was then undertaken to determine the degree to which commercial engine practice now serves the needs of the application classes and to detemine the nature of the competition faced by a new engine system. In each application class the Stirling engine was compared to the conventional engines, assuming that objectives of ongoing Stirling engine development programs are met. This ranking process indicated that Stirling engines showed potential for use in all application classes except very light duty applications (lawn mowers, etc.). However, this potential is contingent on demonstrating much greater operating life and reliability than has been demonstrated to date by developmental Stirling engine systems. This implies that future program initiatives in developing Stirling engine systems should give more emphasis to life and reliability issues than has been the case in ongoing programs.

  16. Biomaterials and therapeutic applications

    NASA Astrophysics Data System (ADS)

    Ferraro, Angelo

    2016-03-01

    A number of organic and inorganic, synthetic or natural derived materials have been classified as not harmful for the human body and are appropriate for medical applications. These materials are usually named biomaterials since they are suitable for introduction into living human tissues of prosthesis, as well as for drug delivery, diagnosis, therapies, tissue regeneration and many other clinical applications. Recently, nanomaterials and bioabsorbable polymers have greatly enlarged the fields of application of biomaterials attracting much more the attention of the biomedical community. In this review paper I am going to discuss the most recent advances in the use of magnetic nanoparticles and biodegradable materials as new biomedical tools.

  17. Industrial application experiment series

    NASA Technical Reports Server (NTRS)

    Bluhm, S. A.

    1980-01-01

    The deployment of parabolic dish systems into the industrial sector for the purpose of providing users, suppliers, sponsors, and developers with a realistic assessment of system feasibility in selected near-term industrial applications will be accomplished initially through the industrial module experiment and later through additional experiments involving thermal, electric, and combined thermal and electrical systems. The approach is to progress through steps, from single module to multi-module systems, from thermal-only applications to more complex combined thermal and electric applications. The experience of other solar thermal experiments, particularly those involving parabolic dish hardware, will be utilized to the fullest extent possible in experiment planning and implementation.

  18. Wind energy applications guide

    SciTech Connect

    anon.

    2001-01-01

    The brochure is an introduction to various wind power applications for locations with underdeveloped transmission systems, from remote water pumping to village electrification. It includes an introductory section on wind energy, including wind power basics and system components and then provides examples of applications, including water pumping, stand-alone systems for home and business, systems for community centers, schools, and health clinics, and examples in the industrial area. There is also a page of contacts, plus two specific example applications for a wind-diesel system for a remote station in Antarctica and one on wind-diesel village electrification in Russia.

  19. Application Interoperability with SAMP

    NASA Astrophysics Data System (ADS)

    Fitzpatrick, M.; Laurino, O.; Paioro, L.; Taylor, M. B.

    2013-10-01

    The Simple Applications Messaging Protocol (SAMP) is a Virtual Observatory (VO) specification that enables astronomy software tools to exchange control information and data, allowing desktop applications to work as an integrated suite of tools rather than requiring complex functionality to be (redundantly) built into tools individually. In addition, SAMP allows new workflows to be created for the science user that leverages the advantages of each tool (e.g. visualization of tables or images, analysis, etc.), greatly reducing the time needed to switch between applications and tasks. We present here a short introduction to the protocol itself, a survey of some toolkits for application authors who wish to introduce SAMP functionality into their tools, and some examples of real-world usage.

  20. Photochemical Modeling Applications

    EPA Pesticide Factsheets

    Provides access to modeling applications involving photochemical models, including modeling of ozone, particulate matter (PM), and mercury for national and regional EPA regulations such as the Clean Air Interstate Rule (CAIR) and the Clean Air Mercury Rule

  1. Potential Applications for AQUATOX

    EPA Pesticide Factsheets

    AQUATOX has a myriad of potential applications to water management issues and programs, including water quality criteria and standards, TMDLs (Total Maximum Daily Loads), and ecological risk assessments of aquatic systems.

  2. Novel Applications of Computers

    ERIC Educational Resources Information Center

    Levi, Barbara G.

    1970-01-01

    Presents some novel applications of the computer to physics research. They include (1) a computer program for calculating Compton scattering, (2) speech simulation, (3) data analysis in spectrometry, and (4) measurement of complex alpha-particle spectrum. Bibliography. (LC)

  3. Neutron sources and applications

    SciTech Connect

    Price, D.L.; Rush, J.J.

    1994-01-01

    Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

  4. Industrial applications of nanoparticles.

    PubMed

    Stark, W J; Stoessel, P R; Wohlleben, W; Hafner, A

    2015-08-21

    Research efforts in the past two decades have resulted in thousands of potential application areas for nanoparticles - which materials have become industrially relevant? Where are sustainable applications of nanoparticles replacing traditional processing and materials? This tutorial review starts with a brief analysis on what makes nanoparticles attractive to chemical product design. The article highlights established industrial applications of nanoparticles and then moves to rapidly emerging applications in the chemical industry and discusses future research directions. Contributions from large companies, academia and high-tech start-ups are used to elucidate where academic nanoparticle research has revolutionized industry practice. A nanomaterial-focused analysis discusses new trends, such as particles with an identity, and the influence of modern instrument advances in the development of novel industrial products.

  5. Food Applications and Regulation

    NASA Astrophysics Data System (ADS)

    Gálvez, Antonio; Abriouel, Hikmate; Omar, Nabil Ben; Lucas, Rosario

    This chapter deals with food applications of bacteriocins. Regulatory issues on the different possibilities for incorporating bacteriocins as bioprotectants are discussed. Specific applications of bacteriocins or bacteriocin-producing strains are described for main food categories, including milk and dairy products, raw meats, ready-to-eat meat and poultry products, fermented meats, fish and fish products or fermented fish. The last section of the chapter deals with applications in foods and beverages derived from plant materials, such as raw vegetable foods, fruits and fruit juices, cooked food products, fermented vegetable foods and ­fermented beverages. Results obtained for application of bacteriocins in combination with other hurdles are also discussed for each specific case, with a special emphasis on novel food packaging and food-processing technologies, such as irradiation, pulsed electric field treatments or high hydrostatic pressure treatment.

  6. Applications of supercritical fluids.

    PubMed

    Brunner, Gerd

    2010-01-01

    This review discusses supercritical fluids in industrial and near-to-industry applications. Supercritical fluids are flexible tools for processing materials. Supercritical fluids have been applied to mass-transfer processes, phase-transition processes, reactive systems, materials-related processes, and nanostructured materials. Some applications are already at industrial capacity, whereas others remain under development. In addition to extraction, application areas include impregnation and cleaning, multistage countercurrent separation, particle formation, coating, and reactive systems such as hydrogenation, biomass gasification, and supercritical water oxidation. Polymers are modified with supercritical fluids, and colloids and emulsions as well as nanostructured materials exhibit interesting phenomena when in contact with supercritical fluids that can be industrially exploited. For these applications to succeed, the properties of supercritical fluids in combination with the materials processed must be clearly determined and fundamental knowledge of the complex behavior must be made readily available.

  7. Space applications of superconductivity

    NASA Technical Reports Server (NTRS)

    Sullivan, D. B.; Vorreiter, J. W.

    1979-01-01

    Some potential applications of superconductivity in space are summarized, e.g., the use of high field magnets for cosmic ray analysis or energy storage and generation, space applications of digital superconducting devices, such as the Josephson switch and, in the future, a superconducting computer. Other superconducting instrumentation which could be used in space includes: low frequency superconducting sensors, microwave and infrared detectors, instruments for gravitational studies, and high-Q cavities for use as stabilizing elements in clocks and oscillators.

  8. Photovoltaic systems and applications

    SciTech Connect

    Not Available

    1982-01-01

    Abstracts are given of presentations given at a project review meeting held at Albuquerque, NM. The proceedings cover the past accomplishments and current activities of the Photovoltaic Systems Research, Balance-of-System Technology Development and System Application Experiments Projects at Sandia National Laboratories. The status of intermediate system application experiments and residential system analysis is emphasized. Some discussion of the future of the Photovoltaic Program in general, and the Sandia projects in particular is also presented.

  9. Programmable Logic Application Notes

    NASA Technical Reports Server (NTRS)

    Katz, Richard

    1998-01-01

    This column will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter's column will include some announcements and some recent radiation test results and evaluations of interest. Specifically, the following topics will be covered: the Military and Aerospace Applications of Programmable Devices and Technologies Conference to be held at GSFC in September, 1998, proton test results, and some total dose results.

  10. Aluminum powder applications

    SciTech Connect

    Gurganus, T.B.

    1995-08-01

    Aluminum powders have physical and metallurgical characteristics related to their method of manufacture that make them extremely important in a variety of applications. They can propel rockets, improve personal hygiene, increase computer reliability, refine exotic alloys, and reduce weight in the family sedan or the newest Air Force fighter. Powders formed into parts for structural and non-structural applications hold the key to some of the most exciting new developments in the aluminum future.

  11. Nanotubes in biological applications.

    PubMed

    Mundra, Ruchir V; Wu, Xia; Sauer, Jeremy; Dordick, Jonathan S; Kane, Ravi S

    2014-08-01

    Researchers over the last few years have recognized carbon nanotubes (CNTs) as promising materials for a number of biological applications. CNTs are increasingly being explored as potent drug carriers for cancer treatment, for biosensing, and as scaffolds for stem cell culture. Moreover, the integration of CNTs with proteins has led to the development of functional nanocomposites with antimicrobial properties. This review aims at understanding the critical role of CNTs in biological applications with a particular emphasis on more recent studies.

  12. Galileo Timing Applications

    DTIC Science & Technology

    2007-11-01

    Time Interval (PTTI) Meeting Intranet S Internet NetRecord NetRecord NetRecord Figure 11. NetRecorder and Trusted...Summary of application domains for the use of time in cryptography. B2G B2B B2C Applications Military waypoints, judicial reports, construction...document in different languages uses contradicting terms like “UTC,” “GMT,” and world time to refer to exactly the same thing • Individual countries

  13. Applications for alliform carbon

    DOEpatents

    Gogotsi, Yury; Mochalin, Vadym; McDonough, IV, John Kenneth; Simon, Patrice; Taberna, Pierre Louis

    2017-02-21

    This invention relates to novel applications for alliform carbon, useful in conductors and energy storage devices, including electrical double layer capacitor devices and articles incorporating such conductors and devices. Said alliform carbon particles are in the range of 2 to about 20 percent by weight, relative to the weight of the entire electrode. Said novel applications include supercapacitors and associated electrode devices, batteries, bandages and wound healing, and thin-film devices, including display devices.

  14. Programmable Logic Application Notes

    NASA Technical Reports Server (NTRS)

    Katz, Richard

    1998-01-01

    This column will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter's column will include some announcements and some recent radiation test results and evaluations of interest. Specifically, the following topics will be covered: the Military and Aerospace Applications of Programmable Devices and Technologies Conference to be held at GSFC in September, 1998, proton test results, heavy ion test results, and some total dose results.

  15. LCS Content Document Application

    NASA Technical Reports Server (NTRS)

    Hochstadt, Jake

    2011-01-01

    My project at KSC during my spring 2011 internship was to develop a Ruby on Rails application to manage Content Documents..A Content Document is a collection of documents and information that describes what software is installed on a Launch Control System Computer. It's important for us to make sure the tools we use everyday are secure, up-to-date, and properly licensed. Previously, keeping track of the information was done by Excel and Word files between different personnel. The goal of the new application is to be able to manage and access the Content Documents through a single database backed web application. Our LCS team will benefit greatly with this app. Admin's will be able to login securely to keep track and update the software installed on each computer in a timely manner. We also included exportability such as attaching additional documents that can be downloaded from the web application. The finished application will ease the process of managing Content Documents while streamlining the procedure. Ruby on Rails is a very powerful programming language and I am grateful to have the opportunity to build this application.

  16. Applications of electrospun fibers.

    PubMed

    Lu, Ping; Ding, Bin

    2008-01-01

    The simplicity of the electrospinning fabrication process, the diversity of electrospinnable materials, and the unique features associated with electrospun fibers make this technique and resultant structures attractive for various applications. The past few years witnessed the significant progresses in the application areas of electrospun fibers, which were demonstrated by the numbers of the recent published patents on electrospinning. It is very apparent that the current focus has been shifted from studying the modification of the electrospinning conditions and apparatus for obtaining fibers with different sizes, shapes, morphologies, structures, alignments before 2000 to looking for the possible applications of these resultant nanofibers with broad functionalities after 2001. The current paper presents a systematic review on the recent applications of electrospun nanofibers in a broad range of fields including biomedical applications such as drug delivery, tissue engineering, wound dressing and cosmetics, functional materials and devices such as composite reinforcement, filters, protective clothing and smart textiles, and energy and electronics such as batteries/cells and capacitors, sensors and catalysts. Although some of these applications may be still remained in the laboratory in the current stage, plenty of successful examples have proved that electrospun nanofibers have a bright future in a variety of industries.

  17. Applications of cavity optomechanics

    NASA Astrophysics Data System (ADS)

    Metcalfe, Michael

    2014-09-01

    "Cavity-optomechanics" aims to study the quantum properties of mechanical systems. A common strategy implemented in order to achieve this goal couples a high finesse photonic cavity to a high quality factor mechanical resonator. Then, using feedback forces such as radiation pressure, one can cool the mechanical mode of interest into the quantum ground state and create non-classical states of mechanical motion. On the path towards achieving these goals, many near-term applications of this field have emerged. After briefly introducing optomechanical systems and describing the current state-of-the-art experimental results, this article summarizes some of the more exciting practical applications such as ultra-sensitive, high bandwidth accelerometers and force sensors, low phase noise x-band integrated microwave oscillators and optical signal processing such as optical delay-lines, wavelength converters, and tunable optical filters. In this rapidly evolving field, new applications are emerging at a fast pace, but this article concentrates on the aforementioned lab-based applications as these are the most promising avenues for near-term real-world applications. New basic science applications are also becoming apparent such as the generation of squeezed light, testing gravitational theories and for providing a link between disparate quantum systems.

  18. Technology Applications Team: Applications of aerospace technology

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

  19. Automated Inadvertent Intruder Application

    SciTech Connect

    Koffman, Larry D.; Lee, Patricia L.; Cook, James R.; Wilhite, Elmer L.

    2008-01-15

    The Environmental Analysis and Performance Modeling group of Savannah River National Laboratory (SRNL) conducts performance assessments of the Savannah River Site (SRS) low-level waste facilities to meet the requirements of DOE Order 435.1. These performance assessments, which result in limits on the amounts of radiological substances that can be placed in the waste disposal facilities, consider numerous potential exposure pathways that could occur in the future. One set of exposure scenarios, known as inadvertent intruder analysis, considers the impact on hypothetical individuals who are assumed to inadvertently intrude onto the waste disposal site. Inadvertent intruder analysis considers three distinct scenarios for exposure referred to as the agriculture scenario, the resident scenario, and the post-drilling scenario. Each of these scenarios has specific exposure pathways that contribute to the overall dose for the scenario. For the inadvertent intruder analysis, the calculation of dose for the exposure pathways is a relatively straightforward algebraic calculation that utilizes dose conversion factors. Prior to 2004, these calculations were performed using an Excel spreadsheet. However, design checks of the spreadsheet calculations revealed that errors could be introduced inadvertently when copying spreadsheet formulas cell by cell and finding these errors was tedious and time consuming. This weakness led to the specification of functional requirements to create a software application that would automate the calculations for inadvertent intruder analysis using a controlled source of input parameters. This software application, named the Automated Inadvertent Intruder Application, has undergone rigorous testing of the internal calculations and meets software QA requirements. The Automated Inadvertent Intruder Application was intended to replace the previous spreadsheet analyses with an automated application that was verified to produce the same calculations and

  20. Multiphysics Application Coupling Toolkit

    SciTech Connect

    Campbell, Michael T.

    2013-12-02

    This particular consortium implementation of the software integration infrastructure will, in large part, refactor portions of the Rocstar multiphysics infrastructure. Development of this infrastructure originated at the University of Illinois DOE ASCI Center for Simulation of Advanced Rockets (CSAR) to support the center's massively parallel multiphysics simulation application, Rocstar, and has continued at IllinoisRocstar, a small company formed near the end of the University-based program. IllinoisRocstar is now licensing these new developments as free, open source, in hopes to help improve their own and others' access to infrastructure which can be readily utilized in developing coupled or composite software systems; with particular attention to more rapid production and utilization of multiphysics applications in the HPC environment. There are two major pieces to the consortium implementation, the Application Component Toolkit (ACT), and the Multiphysics Application Coupling Toolkit (MPACT). The current development focus is the ACT, which is (will be) the substrate for MPACT. The ACT itself is built up from the components described in the technical approach. In particular, the ACT has the following major components: 1.The Component Object Manager (COM): The COM package provides encapsulation of user applications, and their data. COM also provides the inter-component function call mechanism. 2.The System Integration Manager (SIM): The SIM package provides constructs and mechanisms for orchestrating composite systems of multiply integrated pieces.

  1. Nonlinear Optics and Applications

    NASA Technical Reports Server (NTRS)

    Abdeldayem, Hossin A. (Editor); Frazier, Donald O. (Editor)

    2007-01-01

    Nonlinear optics is the result of laser beam interaction with materials and started with the advent of lasers in the early 1960s. The field is growing daily and plays a major role in emerging photonic technology. Nonlinear optics play a major role in many of the optical applications such as optical signal processing, optical computers, ultrafast switches, ultra-short pulsed lasers, sensors, laser amplifiers, and many others. This special review volume on Nonlinear Optics and Applications is intended for those who want to be aware of the most recent technology. This book presents a survey of the recent advances of nonlinear optical applications. Emphasis will be on novel devices and materials, switching technology, optical computing, and important experimental results. Recent developments in topics which are of historical interest to researchers, and in the same time of potential use in the fields of all-optical communication and computing technologies, are also included. Additionally, a few new related topics which might provoke discussion are presented. The book includes chapters on nonlinear optics and applications; the nonlinear Schrodinger and associated equations that model spatio-temporal propagation; the supercontinuum light source; wideband ultrashort pulse fiber laser sources; lattice fabrication as well as their linear and nonlinear light guiding properties; the second-order EO effect (Pockels), the third-order (Kerr) and thermo-optical effects in optical waveguides and their applications in optical communication; and, the effect of magnetic field and its role in nonlinear optics, among other chapters.

  2. Applications of aerospace technology

    NASA Technical Reports Server (NTRS)

    Rouse, Doris J.

    1984-01-01

    The objective of the Research Triangle Institute Technology Transfer Team is to assist NASA in achieving widespread utilization of aerospace technology in terrestrial applications. Widespread utilization implies that the application of NASA technology is to benefit a significant sector of the economy and population of the Nation. This objective is best attained by stimulating the introduction of new or improved commercially available devices incorporating aerospace technology. A methodology is presented for the team's activities as an active transfer agent linking NASA Field Centers, industry associations, user groups, and the medical community. This methodology is designed to: (1) identify priority technology requirements in industry and medicine, (2) identify applicable NASA technology that represents an opportunity for a successful solution and commercial product, (3) obtain the early participation of industry in the transfer process, and (4) successfully develop a new product based on NASA technology.

  3. Data management applications

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Kennedy Space Center's primary institutional computer is a 4 megabyte IBM 4341 with 3.175 billion characters of IBM 3350 disc storage. This system utilizes the Software AG product known as ADABAS with the on line user oriented features of NATURAL and COMPLETE as a Data Base Management System (DBMS). It is operational under the OS/VSI and is currently supporting batch/on line applications such as Personnel, Training, Physical Space Management, Procurement, Office Equipment Maintenance, and Equipment Visibility. A third and by far the largest DBMS application is known as the Shuttle Inventory Management System (SIMS) which is operational on a Honeywell 6660 (dedicated) computer system utilizing Honeywell Integrated Data Storage I (IDSI) as the DBMS. The SIMS application is designed to provide central supply system acquisition, inventory control, receipt, storage, and issue of spares, supplies, and materials.

  4. APTASENSORS FOR BIOSECURITY APPLICATIONS

    SciTech Connect

    Fischer, N; Tarasow, T; Tok, J

    2007-01-03

    Nucleic acid aptamers have found steadily increased utility and application steadily over the last decade. In particular, aptamers have been touted as a valuable complement to and in some cases replacement for antibodies due to their structural and functional robustness as well as their ease in generation and synthesis. They are thus attractive for biosecurity applications, e.g. pathogen detection, and are especially well suited since their in vitro generation process does not require infection of any host systems. Herein we provide a brief overview of the aptamers generated against biopathogens over the last few years. In addition, a few recently described detection platforms using aptamers (aptasensors) and potentially suitable for biosecurity applications will be discussed.

  5. Clinical applications of magnetoencephalography.

    PubMed

    Stufflebeam, Steven M; Tanaka, Naoaki; Ahlfors, Seppo P

    2009-06-01

    Magnetoencephalography (MEG), in which magnetic fields generated by brain activity are recorded outside of the head, is now in routine clinical practice throughout the world. MEG has become a recognized and vital part of the presurgical evaluation of patients with epilepsy and patients with brain tumors. We review investigations that show an improvement in the postsurgical outcomes of patients with epilepsy by localizing epileptic discharges. We also describe the most common clinical MEG applications that affect the management of patients, and discuss some applications that are close to having a clinical impact on patients.

  6. Microgravity Science and Applications

    NASA Technical Reports Server (NTRS)

    1986-01-01

    The report presents fifteen papers from a workshop on microgravity science and applications held at the Jet Propulsion Laboratory in Pasadena, California, on December 3 to 4, 1984. The workshop and panel were formed by the Solid State Sciences Committee of the Board on Physics and Astronomy of the National Research Council in response to a request from the Office of Science and Technology Policy. The goal was to review the microgravity science and applications (MSA) program of NASA and to evaluate the quality of the program. The topics for the papers are metals and alloys, electronic materials, ceramics and glasses, biotechnology, combustion science, and fluid dynamics.

  7. Applications Spacelab missions

    NASA Technical Reports Server (NTRS)

    Pellerin, C. J., Jr.

    1979-01-01

    The paper presents the plans of the Office of Space and Terrestrial Applications for the Shuttle/Spacelab missions. It is reported that the current program contains dedicated low-gravity mission (Spacelab 3 mission) and several minor missions planned for flight during 1980-1982. It is noted that these missions have either Materials Processing or Earth viewing emphasis. Finally, several representative experiments are used to illustrate the Applications Spacelab Program, such as the Materials Experiment Assembly (MEA), and the Atmospheric Trace Molecule Measured by Spectroscopy (ATMOS) experiment.

  8. Polyimide composites: Application histories

    NASA Technical Reports Server (NTRS)

    Poveromo, L. M.

    1985-01-01

    Advanced composite hardware exposed to thermal environments above 127 C (260 F) must be fabricated from materials having resin matrices whose thermal/moisture resistance is superior to that of conventional epoxy-matrix systems. A family of polyimide resins has evolved in the last 10 years that exhibits the thermal-oxidative stability required for high-temperature technology applications. The weight and structural benefits for organic-matrix composites can now be extended by designers and materials engineers to include structures exposed to 316 F (600 F). Polyimide composite materials are now commercially available that can replace metallic or epoxy composite structures in a wide range of aerospace applications.

  9. Science Application Teams

    NASA Technical Reports Server (NTRS)

    2000-01-01

    This paper discusses the science application team activities. Science Application team are: (1) Represent the diversity of NASA onboard computing of the future. (2) Drive architecture and system software requirements. (3) Demonstrate the benefit of highly capable computing onboard. (4) Study the birth of the first galaxies. (5) Study formation of stars. (6) Discusses the next generation space telescope hardware/software requirement: image processing and on-board optical calibration. Also discusses gamma ray large area space telescope; orbital thermal imaging spectrometer; solar terrestrial probe program; autonomous Mars rover;fault tolerance and errors.

  10. Location Based Application Availability

    NASA Astrophysics Data System (ADS)

    Naeem Akram, Raja; Markantonakis, Konstantinos; Mayes, Keith

    Smart cards are being integrated into a diverse range of industries: ranging from banking, telecom, transport, home/office access control to health and E-passport. Traditionally, cardholders are required to carry a smart card for each application. However, recent developments in the Near Field Communication (NFC) have renewed the interest in multiple applications for different services on a single device. This paper builds onto the NFC initiative and avoids the smart card ownership issues that hinder the adoption of such devices. The proposal integrates the Global Positioning System with the NFC in mobile phones to provide a ubiquitously and flexible service access model.

  11. National information infrastructure applications

    SciTech Connect

    Forslund, D.; George, J.; Greenfield, J.

    1996-07-01

    This is the final report of a two-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). This project sought to develop a telemedical application in which medical records are electronically searched and digital signatures of real CT scan data are indexed and used to characterize a range of diseases and are used to compare on-line medical data with archived clinical data rapidly. This system includes multimedia data management, interactive collaboration, data compression and transmission, remote data storage and retrieval, and automated data analysis integrated in a distributed application between Los Alamos and the National Jewish Hospital.

  12. Future communications satellite applications

    NASA Technical Reports Server (NTRS)

    Bagwell, James W.

    1992-01-01

    The point of view of the research is made through the use of viewgraphs. It is suggested that future communications satellite applications will be made through switched point to point narrowband communications. Some characteristics of which are as follows: small/low cost terminals; single hop communications; voice compatible; full mesh networking; ISDN compatible; and possible limited use of full motion video. Some target applications are as follows: voice/data networks between plants and offices in a corporation; data base networking for commercial and science users; and cellular radio internodal voice/data networking.

  13. Applications Using AIRS Data

    NASA Astrophysics Data System (ADS)

    Ray, S. E.; Pagano, T. S.; Fetzer, E. J.; Lambrigtsen, B.; Olsen, E. T.; Teixeira, J.; Licata, S. J.; Hall, J. R.; Thompson, C. K.

    2015-12-01

    The Atmospheric Infrared Sounder (AIRS) on NASA's Aqua spacecraft has been returning daily global observations of Earth's atmospheric constituents and properties since 2002. With a 12-year data record and daily, global observations in near real-time, AIRS data can play a role in applications that fall under many of the NASA Applied Sciences focus areas. For vector-borne disease, research is underway using AIRS near surface retrievals to assess outbreak risk, mosquito incubation periods and epidemic potential for dengue fever, malaria, and West Nile virus. For drought applications, AIRS temperature and humidity data are being used in the development of new drought indicators and improvement in the understanding of drought development. For volcanic hazards, new algorithms using AIRS data are in development to improve the reporting of sulfur dioxide concentration, the burden and height of volcanic ash and dust, all of which pose a safety threat to aircraft. In addition, anomaly maps of many of AIRS standard products are being produced to help highlight "hot spots" and illustrate trends. To distribute it's applications imagery, AIRS is leveraging existing NASA data frameworks and organizations to facilitate archiving, distribution and participation in the BEDI. This poster will communicate the status of the applications effort for the AIRS Project and provide examples of new maps designed to best communicate the AIRS data.

  14. Applications of Superconductivity

    ERIC Educational Resources Information Center

    Goodkind, John M.

    1971-01-01

    Presents a general review of current practical applications of the properties of superconducters. The devices are classified into groups according to the property that is of primary importance. The article is inteded as a first introduction for students and professionals. (Author/DS)

  15. Transducer applications, a compilation

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The characteristics and applications of transducers are discussed. Subjects presented are: (1) thermal measurements, (2) liquid level and fluid flow measurements, (3) pressure transducers, (4) stress-strain measurements, (5) acceleration and velocity measurements, (6) displacement and angular rotation, and (7) transducer test and calibration methods.

  16. Business Applications of WAP.

    ERIC Educational Resources Information Center

    van Steenderen, Margaret

    2002-01-01

    Explains the development of WAP (wireless application protocol), how it works, and what the major advantages and disadvantages are, especially when applied to the use of information. Topics include standardization; mobile communications; the effect of WAP on business tools, electronic commerce, and information services; consumers; corporate users;…

  17. Forensic Applications of LIBS

    NASA Astrophysics Data System (ADS)

    Hark, Richard R.; East, Lucille J.

    Forensic science is broadly defined as the application of science to matters of the law. Practitioners typically use multidisciplinary scientific techniques for the analysis of physical evidence in an attempt to establish or exclude an association between a suspect and the scene of a crime.

  18. Biomedical applications engineering tasks

    NASA Technical Reports Server (NTRS)

    Laenger, C. J., Sr.

    1976-01-01

    The engineering tasks performed in response to needs articulated by clinicians are described. Initial contacts were made with these clinician-technology requestors by the Southwest Research Institute NASA Biomedical Applications Team. The basic purpose of the program was to effectively transfer aerospace technology into functional hardware to solve real biomedical problems.

  19. Programmable Logic Application Notes

    NASA Technical Reports Server (NTRS)

    Katz, Richard

    2000-01-01

    This column will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter will start a series of notes concentrating on analysis techniques with this issues section discussing worst-case analysis requirements.

  20. Programmable Logic Application Notes

    NASA Technical Reports Server (NTRS)

    Katz, Richard; Day, John H. (Technical Monitor)

    2001-01-01

    This report will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter will continue a series of notes concentrating on analysis techniques with this issue's section discussing the use of Root-Sum-Square calculations for digital delays.

  1. Permit application modifications

    SciTech Connect

    1995-11-01

    This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils.

  2. Clinical Application of Electrocardiography.

    ERIC Educational Resources Information Center

    Brammell, H. L.; Orr, William

    The scalar electrocardiogram (ECG) is one of the most important and commonly used clinical tools in medicine. A detailed description of the recordings of cardiac electrical activity made by the ECG is presented, and the vast numbers of uses made with the data provided by this diagnostic tool are cited. Clinical applications of the ECG are listed.…

  3. Computer applications in bioprocessing.

    PubMed

    Bungay, H R

    2000-01-01

    Biotechnologists have stayed at the forefront for practical applications for computing. As hardware and software for computing have evolved, the latest advances have found eager users in the area of bioprocessing. Accomplishments and their significance can be appreciated by tracing the history and the interplay between the computing tools and the problems that have been solved in bioprocessing.

  4. Applications of kinetic theory

    SciTech Connect

    Gidaspow, D.

    1992-01-01

    The overall objective of this investigation is to develop experimentally verified models for circulating fluidized bed (CFB) combustors. This report presents the author's derivation of analytical solutions useful in understanding the operation of a CFB. The report is in a form of a chapter that reviews the kinetic theory applications.

  5. VCSEL Applications and Simulation

    NASA Technical Reports Server (NTRS)

    Cheung, Samson; Goorjian, Peter; Ning, Cun-Zheng; Li, Jian-Zhong

    2000-01-01

    This viewgraph presentation gives an overview of Vertical Cavity Surface Emitting Laser (VCSEL) simulation and its applications. Details are given on the optical interconnection in information technology of VCSEL, the formulation of the simulation, its numeric algorithm, and the computational results.

  6. TIGER Arc Modification Application

    SciTech Connect

    Armstrong, Hillary

    1995-03-06

    The application enables the geometric correction of TIGER arcs to a more accurate spatial data set. This is done in a structured automated environment according to Census Bureau guidelines and New Mexico state GIS standards. Arcs may be deleted, added, combined, split, and moved relative to a coverage or image displayed in the background.

  7. Arizona's Application Service Provider.

    ERIC Educational Resources Information Center

    Jordan, Darla

    2002-01-01

    Describes the U.S.'s first statewide K-12 application service provider (ASP). The ASP, implemented by the Arizona School Facilities Board, provides access to productivity, communications, and education software programs from any Internet-enabled device, whether in the classroom or home. (EV)

  8. Microcontroller for automation application

    NASA Technical Reports Server (NTRS)

    Cooper, H. W.

    1975-01-01

    The description of a microcontroller currently being developed for automation application was given. It is basically an 8-bit microcomputer with a 40K byte random access memory/read only memory, and can control a maximum of 12 devices through standard 15-line interface ports.

  9. 10 CFR 611.100 - Eligible applicant.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... applicant's debt-to-equity ratio as of the date of the loan application; (2) The applicant's earnings before... to the date of the loan application; (3) The applicant's debt to EBITDA ratio as of the date of the... application; (6) The applicant's liquidity as of the date of the loan application; (7) Statements...

  10. Novel Applications of Peroxidase

    NASA Astrophysics Data System (ADS)

    Rob, Abdul; Ball, Andrew S.; Tuncer, Munir; Wilson, Michael T.

    1997-02-01

    The article entitled "Novel Biocatalysts Will Work Even Better for Industry" published recently in this Journal (1) was informative and interesting. However it touched only briefly on the application of peroxidase as catalyst. Here, we would like to mention in more detail the novel applications of peroxidase in agricultural, paper pulp, water treatment, pharmaceutical, and medical situations. Firstly, the peroxidase isolated from Phanerochaete chyrosporium has been shown to detoxify herbicides such as atrazine to less toxic compounds and would certainly find potential application in agriculture (2). Secondly, the peroxidase produced by Streptomyces thermoviolaceus may find application in the paper pulp industry as a delignifying agent (3). Thirdly, it has been shown that extracellular peroxidase produced by Streptomyces avermitilis can remove the intense color from paper-mill effluent obtained after semichemical alkaline pulping of wheat straw (4), and thus this enzyme might find application as a catalyst in water treatment plants. Fourthly, the heme-containing horseradish peroxidase enzyme has been exploited in several diagnostic applications in pharmaceutics and medicine, such as the detection of human immunodeficiency virus and cystic fibrosis (5-10). Finally, recent work from our laboratory has suggested that thermophilic nonheme peroxidase produced by Thermomonospora fusca BD25 may find medical use in the diagnosis of myocardial infarction (11, 12). Literature Cited 1. Wiseman, A. J. Chem. Educ. 1996, 73, 55-58. 2. Mougin, C. Appl. Environ. Microbiol. 1994, 60, 705-708. 3. McCarthy A. J.; Peace, W.; Broda, P. Appl. Microbiol. Technol. 1985, 23, 238-244. 4. Hernandez, M; Rodriguez J; Soliveri, J; Copa, J. L; Perez, M. I; Arias, M. E. Appl. Environ. Microbiol. 1994, 60, 3909-3913. 5. Hopfer, S. M.; Aslanzadeh, J. Ann. Clin. Lab. Sci. 1995, 25, 475-480. 6. Suzuki, K; Iman, M. J. Virol. Methods 1995, 55, 347-356. 7. Nielsen, K. J. Immunoassay 1995, 16, 183-197. 8

  11. Nattokinase: production and application.

    PubMed

    Dabbagh, Fatemeh; Negahdaripour, Manica; Berenjian, Aydin; Behfar, Abdolazim; Mohammadi, Fatemeh; Zamani, Mozhdeh; Irajie, Cambyz; Ghasemi, Younes

    2014-11-01

    Nattokinase (NK, also known as subtilisin NAT) (EC 3.4.21.62) is one of the most considerable extracellular enzymes produced by Bacillus subtilis natto. The main interest about this enzyme is due to its direct fibrinolytic activity. Being stable enough in the gastrointestinal tract makes this enzyme a useful agent for the oral thrombolytic therapy. Thus, NK is regarded as a valuable dietary supplement or nutraceutical. Proven safety and ease of mass production are other advantages of this enzyme. In addition to these valuable advantages, there are other applications attributed to NK including treatment of hypertension, Alzheimer's disease, and vitreoretinal disorders. This review tends to bring a brief description about this valuable enzyme and summarizes the various biotechnological approaches used in its production, recovery, and purification. Some of the most important applications of NK, as well as its future prospects, are also discussed.

  12. Biochemiluminescence and biomedical applications.

    PubMed

    Champiat, D; Roux, A; Lhomme, O; Nosenzo, G

    1994-12-01

    Although used for analytical purposes for more than 40 years it is only recently that biochemiluminescence (BCL) has found widespread acceptance. Methods employing BCL reactions now play an important role in biomedical research and laboratory medicine. The main attractions for the assay technology include exquisite sensitivity (attomole-zeptomole), high selectivity, speed and simplicity. In biomedical research, the most important applications of BCL are: (1) to estimate microbial numbers and to assess cellular states (e.g., after exposure to antibiotic or cytotoxic agents) and in reporter gene studies (firefly luciferase gene); (2) NAD(P)H involved in redox/dehydrogenase studies using Vibrio luciferase complex; (3) BCL labels and CL detection of enzyme labels in immunoassays are the most widespread routine application for this technology. BCL enzyme immunoassays represent the most active area of development, e.g., enhanced BCL method for peroxidase and BCL assays for alkaline phosphatase labels using adamantyl 1,2-dioxetane.

  13. NASA: Biomedical applications team

    NASA Technical Reports Server (NTRS)

    1981-01-01

    The status of projects involving the adaptation of NASA technologies for medical purposes is reviewed. Devices for the measurement of joint deformation of arthritic hands, the development of an artificial pancreas, provision of an auditory signal to avert epileptic seizures, are described along with the control of medication levels, a compressed air tank to supply power for field dentistry, and an electroencephalogram monitor. The use of the Lixiscope as a portable fluoroscope, thermal laminates for hand and foot warmers for patients with Raynaud's syndrome, and the use of absorptive coatings for instruments for controlling medication levels are described. The applicability of occupation health and safety practices to industry, computerized patient scheduling, impregnation of the common facial tissue with an agent for killing respiratory viruses, commercial applications of anthropometric data, and multispectral image analysis of the skin as a diagnostic tool are reviewed.

  14. Ceramics for fusion applications

    SciTech Connect

    Clinard, F.W. Jr.

    1986-01-01

    Ceramics are required for a variety of uses in both near-term fusion devices and in commercial powerplants. These materials must retain adequate structural and electrical properties under conditions of neutron, particle, and ionizing irradiation; thermal and applied stresses; and physical and chemical sputtering. Ceramics such as Al/sub 2/O/sub 3/, MgAl/sub 2/O/sub 4/, BeO, Si/sub 3/N/sub 4/ and SiC are currently under study for fusion applications, and results to date show widely-varying response to the fusion environment. Materials can be identified today which will meet initial operating requirements, but improvements in physical properties are needed to achieve satisfactory lifetimes for critical applications.

  15. Glyconanomaterials for biosensing applications.

    PubMed

    Hao, Nanjing; Neranon, Kitjanit; Ramström, Olof; Yan, Mingdi

    2016-02-15

    Nanomaterials constitute a class of structures that have unique physiochemical properties and are excellent scaffolds for presenting carbohydrates, important biomolecules that mediate a wide variety of important biological events. The fabrication of carbohydrate-presenting nanomaterials, glyconanomaterials, is of high interest and utility, combining the features of nanoscale objects with biomolecular recognition. The structures can also produce strong multivalent effects, where the nanomaterial scaffold greatly enhances the relatively weak affinities of single carbohydrate ligands to the corresponding receptors, and effectively amplifies the carbohydrate-mediated interactions. Glyconanomaterials are thus an appealing platform for biosensing applications. In this review, we discuss the chemistry for conjugation of carbohydrates to nanomaterials, summarize strategies, and tabulate examples of applying glyconanomaterials in in vitro and in vivo sensing applications of proteins, microbes, and cells. The limitations and future perspectives of these emerging glyconanomaterials sensing systems are furthermore discussed.

  16. Glyconanomaterials for Biosensing Applications

    PubMed Central

    Hao, Nanjing; Neranon, Kitjanit

    2015-01-01

    Nanomaterials constitute a class of structures that have unique physiochemical properties and are excellent scaffolds for presenting carbohydrates, important biomolecules that mediate a wide variety of important biological events. The fabrication of carbohydrate-presenting nanomaterials, glyconanomaterials, is of high interest and utility, combining the features of nanoscale objects with biomolecular recognition. The structures can also produce strong multivalent effects, where the nanomaterial scaffold greatly enhances the relatively weak affinities of single carbohydrate ligands to the corresponding receptors, and effectively amplifies the carbohydrate-mediated interactions. Glyconanomaterials are thus an appealing platform for biosensing applications. In this review, we discuss the chemistry for conjugation of carbohydrates to nanomaterials, summarize strategies, and tabulate examples of applying glyconanomaterials in in vitro and in vivo sensing applications of proteins, microbes, and cells. The limitations and future perspectives of these emerging glyconanomaterials sensing systems are furthermore discussed. PMID:26212205

  17. QMRPACK and applications

    SciTech Connect

    Freund, R.W.; Nachtigal, N.M.

    1994-10-01

    QMRPACK is a package of quasi-minimal residual algorithms for the iterative solution of linear systems. In this paper, the authors describe the main features of QMRPACK, comment on the implementations found in the package, and discuss how they would be invoked in a user code. They briefly describe two applications of the codes in the area of simulation of material properties from first principles, and in circuit simulation. They conclude by presenting future directions for QMRPACK.

  18. 1994 Technology Applications Report

    DTIC Science & Technology

    1994-01-01

    converting the oxygen to an active form that kills the cancer cells. Another system, still in the research stage, will be used in fertility...chemical company for improved honeycomb-based ceramics for industrial catalytic converters . ABOUT THE TECHNOLOGY HfMI develops new molding, forming...other areas as well. .Developers, in turn, have converted their BMDO sensor products to commercial uses such as oil drilling and automotive applications

  19. Glyconanoparticles for biomedical applications.

    PubMed

    Dong, Chang-Ming

    2011-03-01

    Over the past two decades, glycosylated nanoparticles (i.e., glyconanoparticles having sugar residues on the surface) received much attention for biomedical applications such as bioassays and targeted drug delivery. This minireview focuses on three aspects: (1) glycosylated gold nanoparticles, (2) glycosylated quantum dots, and (3) glyconanoparticles self-assembled from amphiphilic glycopolymers. The synthetic methods and the multivalent interactions between glyconanoparticles and lectins is shortly illustrated.

  20. Baltimore applications project

    NASA Technical Reports Server (NTRS)

    Golden, T. S.; Yaffee, P.

    1978-01-01

    The Baltimore Applications Project (BAP) was originally designed as an experimental effort to assist the government of the City of Baltimore in applying technology to the solution of municipal problems. Recent modifications in the structuring and operation of the program are discussed. A tabular update on the individual tasks undertaken and their treatment is provided. Details of energy and nonenergy related tasks are presented in appendices.

  1. Applications of ionic liquids.

    PubMed

    Patel, Divia Dinesh; Lee, Jong-Min

    2012-06-01

    Ionic liquids have recently gained popularity in the scientific community owing to their special properties and characteristics. One of the reasons why ionic liquids have been termed "green solvents" is due to their negligible vapour pressure. Their use in electrochemical, biological and metal extraction applications is discussed. Wide research has been carried out for their use in batteries, solar panels, fuel cells, drug deliveries and biomass pretreatments. This work aims to consolidate the various findings from previous works in these areas.

  2. Biomedical applications of photochemistry.

    PubMed

    Chan, Barbara Pui

    2010-10-01

    Photochemistry is the study of photochemical reactions between light and molecules. Recently, there have been increasing interests in using photochemical reactions in the fields of biomaterials and tissue engineering. This work revisits the components and mechanisms of photochemistry and reviews biomedical applications of photochemistry in various disciplines, including oncology, molecular biology, and biosurgery, with particular emphasis on tissue engineering. Finally, potential toxicities and research opportunities in this field are discussed.

  3. AGU membership applications

    NASA Astrophysics Data System (ADS)

    Applications for membership have been received from the following individuals. The letter after the name denotes the proposed primary section affiliation.Aubrey L. Anderson (O), Lennart A. Anderson (V), Kathleen W. Baird (V), William R. Bergmann (A), E. N. Bernard (O), Joyce R. Blueford (O), Wayne M. Brewer (T), Nancy Ann Brewster (O), Philip S. Callahan (O), Jack G. Calvert (A), Drew A. Carey (O), Benjamin Chen (O), J. W. Cole (V), George Courtney (T), Charles G. Crawford (H).

  4. ARM for Platform Application

    NASA Astrophysics Data System (ADS)

    Patte, Mathieu; Poupat, Jean-Luc; Le Meur, Patrick

    2015-09-01

    The activities described in this paper are part of the CNES R&T “Study of a Cortex-R ARM based architecture” performed by Airbus DS Space System & Electronics in 2014. With the support of CNES, Airbus DS has performed the porting of a representative space application software on an ARM based demonstration platform. This paper presents the platform itself, the activities performed at software level and the first results on this evaluation study.

  5. Oxide Films RF Applications

    DTIC Science & Technology

    2006-06-01

    different stabilities and properties . Certain applications, such as integrated dielectrics or photoelectrochemical cells, require thin films of TiO2 that...interesting dielectric properties . Another is that the (001) plane of anatase TiO2 is one of the two main layers stacked along the (100) direction in...Public Release 13. SUPPLEMENTARY NOTES .bDib ibuUl I U 1 iited 14. ABSTRACT TiO2 films were grown using a reactive molecular beam epitaxy system

  6. Advanced Welding Applications

    NASA Technical Reports Server (NTRS)

    Ding, Robert J.

    2010-01-01

    Some of the applications of advanced welding techniques are shown in this poster presentation. Included are brief explanations of the use on the Ares I and Ares V launch vehicle and on the Space Shuttle Launch vehicle. Also included are microstructural views from four advanced welding techniques: Variable Polarity Plasma Arc (VPPA) weld (fusion), self-reacting friction stir welding (SR-FSW), conventional FSW, and Tube Socket Weld (TSW) on aluminum.

  7. Opportunities for PV applications

    NASA Technical Reports Server (NTRS)

    Scott-Monck, John A.; Rahilly, W. Patrick

    1987-01-01

    Workshop members devoted the majority of time to discussing future prospects for technology support of photovoltaic applications. Photovoltaics has provided power for almost every spacecraft launched in the free world in the last 25 years. Over this time, photovoltaics has demonstrated impressive growth in power level, operating lifetime and specific power (W/kg and W/square m). Yet, the current attitude toward this reliable form of space power generation is likely to preclude further dramatic performance gains.

  8. Fresnel lens light applicator

    SciTech Connect

    Castel, J.C.; Kerwin, R.G.

    1987-09-01

    A therapeutic laser radiation applicator is described which consists of: means for providing laser radiation in an elliptical transverse distribution; and means for converting the elliptical transverse distribution of the laser radiation into a circular distribution thereof comprising at least two axially spaced fresnel lenses, and means for mounting the fresnel lenses in preselected association with the laser radiation means for refracting a portion of a laser radiation to the circular distribution adapted to provide a therapeutic tissue irradiation pattern.

  9. Agricultural application of SWECS

    NASA Astrophysics Data System (ADS)

    Nelson, V.

    Principal applications of wind energy for agriculture are (1) farmstead power, mainly electrical, (2) building heating, (3) irrigation pumping, (4) product storage and processing, (5) hot water for residences and dairies, and (6) associated industries of agribusiness such as feedlots, fertilizer elevators, greenhouses, etc. Field experiments show that wind energy is a viable alternative, however, reliability and maintenance are still major problems. Test results of the various experiments are described.

  10. Newton polyhedron and applications

    SciTech Connect

    Bruno, A.D.

    1994-12-31

    We give a simple presentation of an algorithm of selecting asymptotical first approximations of equations (algebraic and ordinary differential and partial differential). Here the first approximation of a solution of the initial equation is a solution of the corresponding first approximation of the equation. The algorithm is based on the geometry of power exponents including the Newton polyhedron. We give also a survey of applications of the algorithm in problems of Celestial Mechanics and Hydrodynamics.

  11. Space vehicle accelerometer applications

    NASA Technical Reports Server (NTRS)

    1972-01-01

    The physics of accelerometer applications are reviewed, and details are given on accelerometer instruments and the principles of their operations. The functions to which accelerometers are applied are listed, and terms commonly used in accelerometer reports are defined. Criteria guides state what rule, limitation, or standard must be imposed on each essential design element to insure successful design. Elaboration of these criteria in the form of recommended practices show how to satisfy each of these criteria, with the best procedure described when possible.

  12. 40 CFR 194.15 - certification application(s).

    Code of Federal Regulations, 2010 CFR

    1996-07-01

    ... ISOLATION PILOT PLANT'S COMPLIANCE WITH THE 40 CFR PART 191 DISPOSAL REGULATIONS Compliance Certification and Re-certification Applications Sec. 194.15 Content of compliance re-certification application(s... Sec. 194.15 Content of compliance re PROTECTION OF ENVIRONMENT ENVIRONMENTAL PROTECTION...

  13. Transactional Network Platform: Applications

    SciTech Connect

    Katipamula, Srinivas; Lutes, Robert G.; Ngo, Hung; Underhill, Ronald M.

    2013-10-31

    In FY13, Pacific Northwest National Laboratory (PNNL) with funding from the Department of Energy’s (DOE’s) Building Technologies Office (BTO) designed, prototyped and tested a transactional network platform to support energy, operational and financial transactions between any networked entities (equipment, organizations, buildings, grid, etc.). Initially, in FY13, the concept demonstrated transactions between packaged rooftop air conditioners and heat pump units (RTUs) and the electric grid using applications or "agents" that reside on the platform, on the equipment, on a local building controller or in the Cloud. The transactional network project is a multi-lab effort with Oakridge National Laboratory (ORNL) and Lawrence Berkeley National Laboratory (LBNL) also contributing to the effort. PNNL coordinated the project and also was responsible for the development of the transactional network (TN) platform and three different applications associated with RTUs. This document describes two applications or "agents" in details, and also summarizes the platform. The TN platform details are described in another companion document.

  14. Applications of nuclear physics.

    PubMed

    Hayes, A C

    2017-02-01

    Today the applications of nuclear physics span a very broad range of topics and fields. This review discusses a number of aspects of these applications, including selected topics and concepts in nuclear reactor physics, nuclear fusion, nuclear non-proliferation, nuclear-geophysics, and nuclear medicine. The review begins with a historic summary of the early years in applied nuclear physics, with an emphasis on the huge developments that took place around the time of World War II, and that underlie the physics involved in designs of nuclear explosions, controlled nuclear energy, and nuclear fusion. The review then moves to focus on modern applications of these concepts, including the basic concepts and diagnostics developed for the forensics of nuclear explosions, the nuclear diagnostics at the National Ignition Facility, nuclear reactor safeguards, and the detection of nuclear material production and trafficking. The review also summarizes recent developments in nuclear geophysics and nuclear medicine. The nuclear geophysics areas discussed include geo-chronology, nuclear logging for industry, the Oklo reactor, and geo-neutrinos. The section on nuclear medicine summarizes the critical advances in nuclear imaging, including PET and SPECT imaging, targeted radionuclide therapy, and the nuclear physics of medical isotope production. Each subfield discussed requires a review article unto itself, which is not the intention of the current review; rather, the current review is intended for readers who wish to get a broad understanding of applied nuclear physics.

  15. Fuel cell market applications

    SciTech Connect

    Williams, M.C.

    1995-12-31

    This is a review of the US (and international) fuel cell development for the stationary power generation market. Besides DOE, GRI, and EPRI sponsorship, the US fuel cell program has over 40% cost-sharing from the private sector. Support is provided by user groups with over 75 utility and other end-user members. Objectives are to develop and demonstrate cost-effective fuel cell power generation which can initially be commercialized into various market applications using natural gas fuel by the year 2000. Types of fuel cells being developed include PAFC (phosphoric acid), MCFC (molten carbonate), and SOFC (solid oxide); status of each is reported. Potential international applications are reviewed also. Fuel cells are viewed as a force in dispersed power generation, distributed power, cogeneration, and deregulated industry. Specific fuel cell attributes are discussed: Fuel cells promise to be one of the most reliable power sources; they are now being used in critical uninterruptible power systems. They need hydrogen which can be generated internally from natural gas, coal gas, methanol landfill gas, or other fuels containing hydrocarbons. Finally, fuel cell development and market applications in Japan are reviewed briefly.

  16. Load Balancing Scientific Applications

    SciTech Connect

    Pearce, Olga Tkachyshyn

    2014-12-01

    The largest supercomputers have millions of independent processors, and concurrency levels are rapidly increasing. For ideal efficiency, developers of the simulations that run on these machines must ensure that computational work is evenly balanced among processors. Assigning work evenly is challenging because many large modern parallel codes simulate behavior of physical systems that evolve over time, and their workloads change over time. Furthermore, the cost of imbalanced load increases with scale because most large-scale scientific simulations today use a Single Program Multiple Data (SPMD) parallel programming model, and an increasing number of processors will wait for the slowest one at the synchronization points. To address load imbalance, many large-scale parallel applications use dynamic load balance algorithms to redistribute work evenly. The research objective of this dissertation is to develop methods to decide when and how to load balance the application, and to balance it effectively and affordably. We measure and evaluate the computational load of the application, and develop strategies to decide when and how to correct the imbalance. Depending on the simulation, a fast, local load balance algorithm may be suitable, or a more sophisticated and expensive algorithm may be required. We developed a model for comparison of load balance algorithms for a specific state of the simulation that enables the selection of a balancing algorithm that will minimize overall runtime.

  17. Applications of nuclear physics

    NASA Astrophysics Data System (ADS)

    Hayes, A. C.

    2017-02-01

    Today the applications of nuclear physics span a very broad range of topics and fields. This review discusses a number of aspects of these applications, including selected topics and concepts in nuclear reactor physics, nuclear fusion, nuclear non-proliferation, nuclear-geophysics, and nuclear medicine. The review begins with a historic summary of the early years in applied nuclear physics, with an emphasis on the huge developments that took place around the time of World War II, and that underlie the physics involved in designs of nuclear explosions, controlled nuclear energy, and nuclear fusion. The review then moves to focus on modern applications of these concepts, including the basic concepts and diagnostics developed for the forensics of nuclear explosions, the nuclear diagnostics at the National Ignition Facility, nuclear reactor safeguards, and the detection of nuclear material production and trafficking. The review also summarizes recent developments in nuclear geophysics and nuclear medicine. The nuclear geophysics areas discussed include geo-chronology, nuclear logging for industry, the Oklo reactor, and geo-neutrinos. The section on nuclear medicine summarizes the critical advances in nuclear imaging, including PET and SPECT imaging, targeted radionuclide therapy, and the nuclear physics of medical isotope production. Each subfield discussed requires a review article unto itself, which is not the intention of the current review; rather, the current review is intended for readers who wish to get a broad understanding of applied nuclear physics.

  18. Commercial applications for COIL

    NASA Astrophysics Data System (ADS)

    Solomon, Wayne C.; Carroll, David L.; King, D. M.; Fockler, L. A.; Stromberg, D. S.; Sexauer, M.; Milmoe, A.; Sentman, Lee H.

    2000-01-01

    The chemical oxygen-iodine laser (COIL) is a high power, fiber deliverable tool, which can be used for a number of different industrial applications. COIL is of particular interest because of its short fiber deliverable wavelength, high scaleable continuous wave power, and excellent material interaction properties. In past research the University of Illinois at Urbana-Champaign identified and decommissioning and decontamination (DD) of nuclear facilities as a primary focus for COIL technology. DD will be a major challenge in the coming decades. The use of a robotically driven fiber delivered cutting/ablation tool in contaminated areas promises to lower risks to workers for the DD mission. Further, the high cutting speed of COIL will significantly reduce the time required to cut contaminated equipment, reducing costs. The high power of COIL will permit the dismantling of thick stacks of piping and equipment as well as reactor vessels. COIL is very promising for the removal of material from contaminated surfaces, perhaps to depths thicker than an inch. Laser cutting and ablation minimizes dust and fumes, which reduces the required number of high efficiency particulate accumulator filters, thus reducing costly waste disposal. Other potential industrial applications for COIL are shipbuilding, automotive manufacturing, heavy machinery manufacturing, tasks requiring underwater cutting or welding, and there appear to be very promising applications for high powers lasers in the oil industry.

  19. FPA Depot - Web Application

    NASA Technical Reports Server (NTRS)

    Avila, Edwin M. Martinez; Muniz, Ricardo; Szafran, Jamie; Dalton, Adam

    2011-01-01

    Lines of code (LOC) analysis is one of the methods used to measure programmer productivity and estimate schedules of programming projects. The Launch Control System (LCS) had previously used this method to estimate the amount of work and to plan development efforts. The disadvantage of using LOC as a measure of effort is that one can only measure 30% to 35% of the total effort of software projects involves coding [8]. In the application, instead of using the LOC we are using function point for a better estimation of hours in each software to develop. Because of these disadvantages, Jamie Szafran of the System Software Branch of Control And Data Systems (NE-C3) at Kennedy Space Canter developed a web application called Function Point Analysis (FPA) Depot. The objective of this web application is that the LCS software architecture team can use the data to more accurately estimate the effort required to implement customer requirements. This paper describes the evolution of the domain model used for function point analysis as project managers continually strive to generate more accurate estimates.

  20. IMS applications analysis

    SciTech Connect

    RODACY,PHILIP J.; REBER,STEPHEN D.; SIMONSON,ROBERT J.; HANCE,BRADLEY G.

    2000-03-01

    This report examines the market potential of a miniature, hand-held Ion Mobility Spectrometer. Military and civilian markets are discussed, as well as applications in a variety of diverse fields. The strengths and weaknesses of competing technologies are discussed. An extensive Ion Mobility Spectrometry (IMS) bibliography is included. The conclusions drawn from this study are: (1) There are a number of competing technologies that are capable of detecting explosives, drugs, biological, or chemical agents. The IMS system currently represents the best available compromise regarding sensitivity, specificity, and portability. (2) The military market is not as large as the commercial market, but the military services are more likely to invest R and D funds in the system. (3) Military applications should be addressed before commercial applications are addressed. (4) There is potentially a large commercial market for rugged, hand-held Ion Mobility Spectrometer systems. Commercial users typically do not invest R and D funds in this type of equipment rather, they wait for off-the-shelf availability.

  1. Panoramic lens applications revisited

    NASA Astrophysics Data System (ADS)

    Thibault, Simon

    2008-04-01

    During the last few years, innovative optical design strategies to generate and control image mapping have been successful in producing high-resolution digital imagers and projectors. This new generation of panoramic lenses includes catadioptric panoramic lenses, panoramic annular lenses, visible/IR fisheye lenses, anamorphic wide-angle attachments, and visible/IR panomorph lenses. Given that a wide-angle lens images a large field of view on a limited number of pixels, a systematic pixel-to-angle mapping will help the efficient use of each pixel in the field of view. In this paper, we present several modern applications of these modern types of hemispheric lenses. Recently, surveillance and security applications have been proposed and published in Security and Defence symposium. However, modern hemispheric lens can be used in many other fields. A panoramic imaging sensor contributes most to the perception of the world. Panoramic lenses are now ready to be deployed in many optical solutions. Covered applications include, but are not limited to medical imaging (endoscope, rigiscope, fiberscope...), remote sensing (pipe inspection, crime scene investigation, archeology...), multimedia (hemispheric projector, panoramic image...). Modern panoramic technologies allow simple and efficient digital image processing and the use of standard image analysis features (motion estimation, segmentation, object tracking, pattern recognition) in the complete 360° hemispheric area.

  2. [The applicability of results].

    PubMed

    Marín-León, I

    2015-11-01

    The ultimate aim of the critical reading of medical literature is to use the scientific advances in clinical practice or for innovation. This requires an evaluation of the applicability of the results of the studies that have been published, which begins with a clear understanding of these results. When the studies do not provide sufficient guarantees of rigor in design and analysis, the conditions necessary for the applicability of the results are not met; however, the fact that the results are reliable is not enough to make it worth trying to use their conclusions. This article explains how carrying out studies in experimental or artificial conditions often moves them away from the real conditions in which they claim to apply their conclusions. To evaluate this applicability, the article proposes evaluating a set of items that will enable the reader to determine the likelihood that the benefits and risks reported in the studies will yield the least uncertainty in the clinical arena where they aim to be applied.

  3. LAVA Applications to Open Rotors

    NASA Technical Reports Server (NTRS)

    Kiris, Cetin C.; Housman, Jeff; Barad, Mike; Brehm, Christoph

    2015-01-01

    Outline: LAVA (Launch Ascent Vehicle Aerodynamics); Introduction; Acoustics Related Applications; LAVA Applications to Open Rotor; Structured Overset Grids; Cartesian Grid with Immersed Boundary; High Speed Case; High Speed Case with Plate Low Speed Case.

  4. Applications of lobster eye optics

    NASA Astrophysics Data System (ADS)

    Hudec, R.; Pina, L.; Inneman, A.; Tichy, V.

    2015-05-01

    Applications of wide field Lobster Eye X ray telescopes are presented and discussed. The wide field X ray optics was originally proposed for use in X-ray astronomy, but there are numerous other application areas as well.

  5. Sample Cancer Epidemiology Grant Applications

    Cancer.gov

    The National Cancer Institute frequently receives questions from investigators for examples of successfully funded grant applications. Several investigators agreed to let the Epidemiology and Genomics Research Program post excerpts of their grant applications online.

  6. Laser Ablation for Medical Applications

    NASA Astrophysics Data System (ADS)

    Hayashi, Ken-Ichi

    Medical applications of laser are measurement, laser surgery, in-situ monitoring, and processing of medical devices. In this paper, author briefly reviews the trends of medical applications, describes some new applications, and then discuss about the future trends and problems of medical applications. At present, the domestic market of laser equipment for medical applications is nearly 1/10 of that for industrial applications, which has registered significant growth continuously. Laser surgery as a minimum invasive surgery under arthroscope is expected to decrease the pain of patients. Precise processing such as cutting and welding is suitable for manufacturing medical devices. Pulsed laser deposition has been successfully applied to the thin film coating. The corneal refractive surgery by ArF excimer laser has been widely accepted for its highly safe operation. Laser ablation for retinal implant in the visual prosthesis is one of the promising applications of laser ablation in medicine. New applications with femtosecond laser are expected in the near future.

  7. Capacitor Technologies, Applications and Reliability

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Various aspects of capacitor technologies and applications are discussed. Major emphasis is placed on: the causes of failures; accelerated testing; screening tests; destructive physical analysis; applications techniques; and improvements in capacitor capabilities.

  8. Application Kit for Federal Assistance

    EPA Pesticide Factsheets

    The Federal Grant & Cooperative Agreement Act of 1977 requires Federal agencies to use a contract to acquire property or services that directly benefit the Federal government.This letter to the applicant explains the Application Kit for Federal Assistance.

  9. Applicant Analysis: 2001 Entering Class.

    ERIC Educational Resources Information Center

    Weaver, Richard G.; Haden, N. Karl; Ramanna, Satyan; Valachovic, Richard W.

    2003-01-01

    Presents findings of the annual analysis of dental school applicant numbers and characteristics conducted by the American Dental Education Association. There were 7,412 applicants to dental schools in 2001, and 57.6% were enrolled in 2001. Provides other data about applicants and admissions. (SLD)

  10. Birthdates of Medical School Applicants

    ERIC Educational Resources Information Center

    Abel, Ernest L; Sokol, Robert J.; Kruger, Michael L.; Yargeau, Dawn

    2008-01-01

    We determined if the "relative age" effect, wherein older students in an age cohort in early grades do better academically, extends to birthdates of applicants to medical schools, and if birthdates are related to the success of their applications. We examined birthdays of applicants from Michigan to Wayne State University's School of…

  11. Liquid lubrication for space applications

    NASA Technical Reports Server (NTRS)

    Fusaro, Robert L.; Khonsari, Michael M.

    1993-01-01

    Reviewed here is the state of the art of liquid lubrication for space applications. The areas discussed are types of liquid lubrication mechanisms, space environmental effects on lubrication, classification of lubricants, liquid lubricant additives, grease lubrication, mechanism materials, bearing anomalies and failures, lubricant supply techniques, and application types and lubricant needs for those applications.

  12. Liquid lubrication for space applications

    NASA Technical Reports Server (NTRS)

    Fusaro, Robert L.; Khonsari, Michael M.

    1992-01-01

    Reviewed here is the state of the art of liquid lubrication for space applications. The areas discussed are types of liquid lubrication mechanisms, space environmental effects on lubrication, classification of lubricants, liquid lubricant additives, grease lubrication, mechanism materials, bearing anomalies and failures, lubricant supply techniques, and application types and lubricant needs for those applications.

  13. Systems Applications in Higher Education.

    ERIC Educational Resources Information Center

    Schure, Alexander

    This paper discusses the application of computers for higher education and describes a philosophy and initial application of an accountability system that can aid in coping with the problems of occupationally related schools. Discussed are: (1) the role of computers in systems application; (2) the need for systems related information: the…

  14. Technological Applications in Science Assessment.

    ERIC Educational Resources Information Center

    Helgeson, Stanley L.; Kumar, David D.

    Educational technology has been a focus of development and research in science teaching and learning. This document reviews research dealing with computer and hypermedia applications to assessment in science education. The paper reports the findings first for computer applications for assessment and then for hypermedia applications in assessment.…

  15. Radar applications overview

    NASA Astrophysics Data System (ADS)

    Greenspan, Marshall

    1996-06-01

    During the fifty years since its initial development as a means of providing early warning of airborne attacks against allied countries during World War II, radar systems have developed to the point of being highly mobile and versatile systems capable of supporting a wide variety of remote sensing applications. Instead of being tied to stationary land-based sites, radar systems have found their way into highly mobile land vehicles as well as into aircraft, missiles, and ships of all sizes. Of all these applications, however, the most exciting revolution has occurred in the airborne platform arena where advanced technology radars can be found in all shapes and sizes...ranging from the large AWACS and Joint STARS long range surveillance and targeting systems to small millimeter wave multi-spectral sensors on smart weapons that can detect and identify their targets through the use of highly sophisticated digital signal processing hardware and software. This paper presents an overview of these radar applications with the emphasis on modern airborne sensors that span the RF spectrum. It will identify and describe the factors that influence the parameters of low frequency and ultra wide band radars designed to penetrate ground and dense foliage environments and locate within them buried mines, enemy armor, and other concealed or camouflaged weapons of war. It will similarly examine the factors that lead to the development of airborne radar systems that support long range extended endurance airborne surveillance platforms designed to detect and precision-located both small high speed airborne threats as well as highly mobile time critical moving and stationary surface vehicles. The mission needs and associated radar design impacts will be contrasted with those of radar systems designed for high maneuverability rapid acquisition tactical strike warfare platforms, and shorter range cued air-to-surface weapons with integral smart radar sensors.

  16. Factsheets Web Application

    SciTech Connect

    VIGIL,FRANK; REEDER,ROXANA G.

    2000-10-30

    The Factsheets web application was conceived out of the requirement to create, update, publish, and maintain a web site with dynamic research and development (R and D) content. Before creating the site, a requirements discovery process was done in order to accurately capture the purpose and functionality of the site. One of the high priority requirements for the site would be that no specialized training in web page authoring would be necessary. All functions of uploading, creation, and editing of factsheets needed to be accomplished by entering data directly into web form screens generated by the application. Another important requirement of the site was to allow for access to the factsheet web pages and data via the internal Sandia Restricted Network and Sandia Open Network based on the status of the input data. Important to the owners of the web site would be to allow the published factsheets to be accessible to all personnel within the department whether or not the sheets had completed the formal Review and Approval (R and A) process. Once the factsheets had gone through the formal review and approval process, they could then be published both internally and externally based on their individual publication status. An extended requirement and feature of the site would be to provide a keyword search capability to search through the factsheets. Also, since the site currently resides on both the internal and external networks, it would need to be registered with the Sandia search engines in order to allow access to the content of the site by the search engines. To date, all of the above requirements and features have been created and implemented in the Factsheet web application. These have been accomplished by the use of flat text databases, which are discussed in greater detail later in this paper.

  17. Aerospace materials for nonaerospace applications

    NASA Technical Reports Server (NTRS)

    Johnston, R. L.; Dawn, F. S.

    1974-01-01

    Many of the flame-resistant nonmetallic materials that were developed for the Apollo and Skylab programs are discussed for commercial and military applications. Interchanges of information are taking place with the government agencies, industries, and educational institutions, which are interested in applications of fire-safe nonmetallic materials. These materials are particularly applicable to the design of aircraft, mass transit interiors, residential and public building constructions, nursing homes and hospitals, and to other fields of fire safety applications. Figures 22, 23 and 24 show the potential nonaerospace applications of flame-resistant aerospace materials are shown.

  18. Direct application of geothermal energy

    SciTech Connect

    Reistad, G.M.

    1980-01-01

    An overall treatment of direct geothermal applications is presented with an emphasis on the above-ground engineering. The types of geothermal resources and their general extent in the US are described. The potential market that may be served with geothermal energy is considered briefly. The evaluation considerations, special design aspects, and application approaches for geothermal energy use in each of the applications are considered. The present applications in the US are summarized and a bibliography of recent studies and applications is provided. (MHR)

  19. Space applications instrumentation systems

    NASA Technical Reports Server (NTRS)

    Minzner, R. A.; Oberholtzer, J. D.

    1972-01-01

    A compendium of resumes of 158 instrument systems or experiments, of particular interest to space applications, is presented. Each resume exists in a standardized format, permitting entries for 26 administrative items and 39 scientific or engineering items. The resumes are organized into forty groups determined by the forty spacecraft with which the instruments are associated. The resumes are followed by six different cross indexes, each organized alphabetically according to one of the following catagories: instrument name, acronym, name of principal investigator, name of organization employing the principal investigator, assigned experiment number, and spacecraft name. The resumes are associated with a computerized instrument resume search and retrieval system.

  20. Programmable Logic Application Notes

    NASA Technical Reports Server (NTRS)

    Katz, Richard

    1999-01-01

    This column will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter the focus is on some experimental data on low voltage drop out regulators to support mixed 5 and 3.3 volt systems. A discussion of the Small Explorer WIRE spacecraft will also be given. Lastly, we show take a first look at robust state machines in Hardware Description Languages (VHDL) and their use in critical systems. If you have information that you would like to submit or an area you would like discussed or researched, please give me a call or e-mail.

  1. Introduction to Medical Applications

    NASA Astrophysics Data System (ADS)

    Welch, Ashley J.; van Gemert, Martin J. C.

    The first two parts of this book describe various theories associated with light propagation in tissue and the resulting response. If coherence or polarization information is not needed, we assume that the transport equation governs the optical interaction of light with tissue and the heat conduction equation provides the basis for estimating the thermal response of tissue to laser radiation. In part III of this book, the theory for optical and thermal interactions of laser light with tissue are used to analyze medical applications. In particular, the concepts of parts I and II

  2. NASA RFID Applications

    NASA Technical Reports Server (NTRS)

    Fink, Patrick, Ph.D.; Kennedy, Timothy, Ph.D; Powers, Anne; Haridi, Yasser; Chu, Andrew; Lin, Greg; Yim, Hester; Byerly, Kent, Ph.D.; Barton, Richard, Ph.D.; Khayat, Michael, Ph.D.; Studor, George; Brocato, Robert; Ngo, Phong; Arndt, G. D., Ph.D.; Gross, Julia; Phan, Chau; Ni, David, Ph.D.; Dusl, John; Dekome, Kent

    2007-01-01

    This viewgraph document reviews some potential uses for Radio Frequency Identification in space missions. One of these is inventory management in space, including the methods used in Apollo, the Space Shuttle, and Space Station. The potential RFID uses in a remote human outpost are reviewed. The use of Ultra-Wideband RFID for tracking are examined such as that used in Sapphire DART The advantages of RFID in passive, wireless sensors in NASA applications are shown such as: Micrometeoroid impact detection and Sensor measurements in environmental facilities The potential for E-textiles for wireless and RFID are also examined.

  3. Microdosimetry: Principles and applications

    PubMed Central

    Santa Cruz, Gustavo A.

    2016-01-01

    Aim to present the most important aspects of Microdosimetry, a research field in radiation biophysics. Background microdosimetry is the branch of radiation biophysics that systematically studies the spatial, temporal and spectral aspects of the stochastic nature of the energy deposition processes in microscopic structures. Materials and Methods we briefly review its history, the people, the formalism and the theories and devices that allowed researchers to begin to understand the true nature of radiation action on living matter. Results and Conclusions we outline some of its applications, especially to Boron Neutron Capture Therapy, attempting to explain the biological effectiveness of the boron thermal neutron capture reaction. PMID:26933397

  4. Antenna applications of superconductors

    NASA Astrophysics Data System (ADS)

    Hansen, R. C.

    1991-09-01

    The applicability of superconductors to antennas is examined. Potential implementations that are examined are superdirective arrays; electrically small antennas; tuning and matching of these two; high-gain millimeter-wavelength arrays; and kinetic inductance slow wave structures for array phasers and traveling wave array feeds. It is thought that superdirective arrays and small antennas will not benefit directly, but their tuning/matching networks will undergo major improvements. Miniaturization of antennas will not be aided, but much higher gain millimeter-wave arrays will be realizable. Kinetic inductance slow-wave lines appear advantageous for improved array phasers and time delay, as well as for traveling-wave array feeds.

  5. AGU membership applications

    NASA Astrophysics Data System (ADS)

    Applications for membership have been received from the following individuals. The letter after the name denotes the proposed primary section affiliation.Henry D. I. Abarbanel (O), Julia C. Allen (H), Gwendolyn L. Anson (GP), Andrew Bakun (O), C. A. Bengtson (T), Patricia A. Berge (S), Peter R. Betzer (O), Pierre Boivin (V), Michael V. Capobianco (P), Martin C. Chapman (S), Chu-Yung Chen (V), Timothy J. Clarke (S), Steven C. Constable (GP), Michele Dermer (H), G. M. Dow (T), Carl E. Draper (G), Dean A. Dunn (O), I. B. Everingham (S).

  6. Ultracapacitors for automotive applications

    NASA Astrophysics Data System (ADS)

    Ashtiani, Cyrus; Wright, Randy; Hunt, Gary

    In response to a growing consensus in the auto industry that ultracapacitors can potentially play a key role in the modern vehicle power distribution network, a task force was created at the United States Advanced Battery Consortium (USABC) to tackle issues facing the fledging industry. The task force embarked on first developing and establishing standards for performance and abuse tolerance of ultracapacitors in collaboration with the U.S. Department of Energy and National Labs. Subsequently, potential applications in the automotive industry were identified and a consensus requirement specification was drawn as a development guide for the industry.

  7. Widening ERTS applications

    NASA Technical Reports Server (NTRS)

    Mercanti, E. P.

    1974-01-01

    In less than two years of operation ERTS-1 is shown to have successfully completed its experimental mission and to be delivering an ever-increasing roster of benefits. The widening ERTS applications reviewed include air quality and weather modification, aid to oil exploration, ore-deposit exploration, short-lived event observation, flood area assessment and flood-plain mapping, land and water quality assessment, soil association mapping, crop production measurements, wildlife resources, drought and desertification studies, ground-water exploration, watershed surveys, snow and ice monitoring, surface water mapping, and iceberg surveys. Future projects and developments are also briefly reviewed.

  8. Industrial application experiment series

    NASA Technical Reports Server (NTRS)

    Bluhm, S. A.

    1981-01-01

    Two procurements within the Industrial Application Experiment Series of the Thermal Power Systems Project are discussed. The first procurement, initiated in April 1980, resulted in an award to the Applied Concepts Corporation for the Capital Concrete Experiment: two Fresnel concentrating collectors will be evaluated in single-unit installations at the Jet Propulsion Laboratory Parabolic Dish Test Site and at Capitol Concrete Products, Topeka, Kansas. The second procurement, initiated in March 1981, is titled, "Thermal System Engineering Experiment B." The objective of the procurement is the rapid deployment of developed parabolic dish collectors.

  9. Electromagnetic levitation applications

    SciTech Connect

    Bayazitoglu, Y.

    1996-11-01

    At high temperatures, most materials react with the walls of their containers. This inevitably leads to material contamination and property degradation. Therefore, it becomes difficult to process materials to the required degree of purity and/or measure their properties at high temperatures. Levitation melting has been used on earth and microgravity since to circumvent this problem. In this paper, first a broad survey of the work done in electromagnetic levitation since its invention is given. Then the heat generation due to an alternating magnetic field is studied. Finally, the application of levitation melting in the determination of thermal diffusivity, emissivity, surface tension and viscosity of liquid metals is presented.

  10. Composite prepreg application device

    NASA Technical Reports Server (NTRS)

    Sandusky, Donald A. (Inventor); Marchello, Joseph M. (Inventor)

    1996-01-01

    A heated shoe and cooled pressure roller assembly for composite prepreg application is provided. The shoe assembly includes a heated forward contact surface having a curved pressure surface. The following cooled roller provides a continuous pressure to the thermoplastic while reducing the temperature to approximately 5.degree. C. below glass transition temperature. Electric heating coils inside the forward portion of the shoe heat a thermoplastic workpiece to approximately 100.degree. C. above the glass transition. Immediately following the heated contact surface, a cooled roller cools the work. The end sharpened shape of the heated shoe trailing edge tends to prevent slag buildup and maintain a uniform, relaxed stress fabrication.

  11. Thermoplastics for prosthetic applications.

    PubMed

    Lawrence, R B; Davies, R M

    1981-10-01

    The rapid and accurate thermoforming of plastics for prosthetic applications has been the subject of considerable research and development by the Bioengineering Centre. This paper outlines the progress in the general concepts that have been effected to date. The original below knee (B/K) socket vacuum forming technique has been extended to above knee (A/K) and supracondylar cases, and there have been developments in rotational casting technology. The work is necessarily based on a sound understanding of the properties of the materials concerned and of the associated manufacturing processes. The contribution of the Bioengineering Centre is outlined together with summaries of collaborative work carried out with other organizations.

  12. Laser applications in phlebology

    NASA Astrophysics Data System (ADS)

    Longo, Leonardo; Mancini, S.; Postiglione, Marco; Postiglione, M. G.

    2001-06-01

    PURPOSE: review of laser used in phlebology METHOD: critical analysis of scientific data taken from the literature and based on 25 years personal experience. RESULTS: we have three groups of laser applications in phlebology: for the diagnosis, as physical therapy and as surgical therapy. DISCUSSION AND CONCLUSION: the laser-doppler studies the microcirculations, the no-surgical therapy shown positive results in the treatment of venous ulcers and for the wound healing. It could be indicate also as antiphlogistic and anti-edema therapy, in superficial thrombophlebitis. The surgical laser is useful for the surgical cleaning of ulcers, for haemorroids, angiomas and telangiectases.

  13. Lubricants in conveyor applications

    SciTech Connect

    Paton, C.G.; Bland, S.B.; Melley, R.E.

    1995-01-01

    This paper looks at four critical lubricants used in the conveyor systems of the northern Albertan oil sand facility. The requirements for the lubricants used in the electric motors and gear boxes of the drive systems, the pulley bearings and the idler bearings are discussed in terms of the application and the environment. A number of developments that have occurred in recent years are presented. Data from the field and from custom designed testing in the laboratory are used to support the role of simulation testing in problem solving in this area of technology. 9 refs., 21 figs.

  14. Digital communications: Microwave applications

    NASA Astrophysics Data System (ADS)

    Feher, K.

    Transmission concepts and techniques of digital systems are presented; and practical state-of-the-art implementation of digital communications systems by line-of-sight microwaves is described. Particular consideration is given to statistical methods in digital transmission systems analysis, digital modulation methods, microwave amplifiers, system gain, m-ary and QAM microwave systems, correlative techniques and applications to digital radio systems, hybrid systems, digital microwave systems design, diversity and protection switching techniques, measurement techniques, and research and development trends and unsolved problems.

  15. Applications of Groundwater Helium

    USGS Publications Warehouse

    Kulongoski, Justin T.; Hilton, David R.

    2011-01-01

    Helium abundance and isotope variations have widespread application in groundwater-related studies. This stems from the inert nature of this noble gas and the fact that its two isotopes ? helium-3 and helium-4 ? have distinct origins and vary widely in different terrestrial reservoirs. These attributes allow He concentrations and 3He/4He isotope ratios to be used to recognize and quantify the influence of a number of potential contributors to the total He budget of a groundwater sample. These are atmospheric components, such as air-equilibrated and air-entrained He, as well as terrigenic components, including in situ (aquifer) He, deep crustal and/or mantle He and tritiogenic 3He. Each of these components can be exploited to reveal information on a number of topics, from groundwater chronology, through degassing of the Earth?s crust to the role of faults in the transfer of mantle-derived volatiles to the surface. In this review, we present a guide to how groundwater He is collected from aquifer systems and quantitatively measured in the laboratory. We then illustrate the approach of resolving the measured He characteristics into its component structures using assumptions of endmember compositions. This is followed by a discussion of the application of groundwater He to the types of topics mentioned above using case studies from aquifers in California and Australia. Finally, we present possible future research directions involving dissolved He in groundwater.

  16. Plasma core reactor applications

    NASA Technical Reports Server (NTRS)

    Latham, T. S.; Rodgers, R. J.

    1976-01-01

    Analytical and experimental investigations were conducted to demonstrate the feasibility of fissioning uranium plasma core reactors and to characterize space and terrestrial applications for such reactors. Uranium hexafluoride fuel is injected into core cavities and confined away from the surface by argon buffer gas injected tangentially from the peripheral walls. Radiant heat transfer calculations were performed for a six-cavity reactor configuration. Axial working fluid channels are located along a fraction of each cavity peripheral wall. Results of calculations for outward-directed radiant energy fluxes corresponding to radiating temperatures of 2000 to 5000 K indicate total operating pressures from 80 to 650 atm, centerline temperatures from 6900 to 30,000 K, and total radiated powers from 25 to 2500 MW, respectively. Applications are described for this type of reactor such as (1) high-thrust, high specific impulse space propulsion, (2) highly efficient systems for generation of electricity, and (3) hydrogen or synthetic fuel production systems using the intense radiant energy fluxes.

  17. Superstatistics: Theory and Applications

    NASA Astrophysics Data System (ADS)

    Beck, C.

    2015-12-01

    Many driven nonequilibrium systems are described by a superposition of several dynamics on various time scales. If time scales are clearly separated then the formalism of superstatistics can be applied, leading effectively to a more general statistical mechanics relevant for complex systems. In these types of systems there is often dynamical behavior that is characterized by spatio-temporal fluctuations of an intensive parameter β. This parameter may be for example the inverse temperature, or an effective friction constant, or the amplitude of Gaussian white noise, or the energy dissipation in turbulent flows, or simply a local variance parameter extracted from a measured signal. A nonhomogenoeus spatially extended system with fluctuations in β on a large time scale, larger than the local relaxation time, leads to a superstatistical description, by averaging local Boltzmann factors using a suitable weight function f(β). Kappa distributions in space plasma physics are one example which naturally follows out of this formalism, but there are many applications in other areas as well. In this talk I will sketch the basic theory underlying the superstatistical approach and then describe a couple of recent applications.

  18. Environmental Applications of Nanotechnology

    NASA Astrophysics Data System (ADS)

    Keller, Arturo A.

    2014-07-01

    Engineered nanomaterials (ENMs) are currently used in many applications including agriculture (Gruère, 2012; Khot et al. 2012; Lopez-Moreno et al. 2010; Peralta-Videa et al. 2011; Zhao et al. 2012), aerogels (Bigall et al. 2009), aerospace (Baur and Silverman, 2007), automotive (Coelho et al. 2012; Presting and König, 2003; Salonitis et al. 2010), catalysts (Zhou et al. 2011), coatings, paints and pigments (Dhoke et al. 2009; Gopalakrishnan et al. 2011; Khanna, 2008), composites (Borchardt, 2003; Khanna and Bakshi, 2009; Petrov and Georgiev, 2012; Sahoo et al. 2010), construction (Lee et al. 2010), cosmetics (Musee, 2011; Sabitha et al. 2012; Singh and Nanda, 2012), electronics and optics (Alda et al. 2005; Avasthi et al. 2007; Song et al. 2012; Subramanian and Takhee, 2012), energy (Serrano et al. 2009), environmental remediation (Dionysiou 2004; Khin et al. 2012), filtration and purification (Dhakras, 2011; Savage and Diallo, 2005), food products (Blasco and Picó, 2011; Weiss et al. 2006), medical (Boisseau and Loubaton, 2011; Farokhzad and Langer, 2006), packaging (Silvestre et al. 2011), paper and board (Kharisov and Kharissova, 2010), plastics, security (Marín and Merkoçi, 2012), sensors (Ding et al. 2010; Duncan et al. 2012; Su et al. 2012; Tan et al. 2012), and textiles (Qian and Hinestroza, 2004; Wong et al. 2006), and research is underway on many new applications...

  19. Applications of nuclear physics

    DOE PAGES

    Hayes-Sterbenz, Anna Catherine

    2017-01-10

    Today the applications of nuclear physics span a very broad range of topics and fields. This review discusses a number of aspects of these applications, including selected topics and concepts in nuclear reactor physics, nuclear fusion, nuclear non-proliferation, nuclear-geophysics, and nuclear medicine. The review begins with a historic summary of the early years in applied nuclear physics, with an emphasis on the huge developments that took place around the time of World War II, and that underlie the physics involved in designs of nuclear explosions, controlled nuclear energy, and nuclear fusion. The review then moves to focus on modern applicationsmore » of these concepts, including the basic concepts and diagnostics developed for the forensics of nuclear explosions, the nuclear diagnostics at the National Ignition Facility, nuclear reactor safeguards, and the detection of nuclear material production and trafficking. The review also summarizes recent developments in nuclear geophysics and nuclear medicine. The nuclear geophysics areas discussed include geo-chronology, nuclear logging for industry, the Oklo reactor, and geo-neutrinos. The section on nuclear medicine summarizes the critical advances in nuclear imaging, including PET and SPECT imaging, targeted radionuclide therapy, and the nuclear physics of medical isotope production. Lastly, each subfield discussed requires a review article unto itself, which is not the intention of the current review; rather, the current review is intended for readers who wish to get a broad understanding of applied nuclear physics.« less

  20. Novel oral laser applications

    NASA Astrophysics Data System (ADS)

    Yousif, A.; Strassl, M.; Beer, F.; Verhagen, L.; Wittschier, M.; Wintner, E.

    2007-03-01

    In dental hard tissue ablation, ultra-short laser pulses have proven sufficiently their potential for material ablation with negligible collateral damage providing many advantages. The absence of micro-cracks and the possibility to avoid overheating of the pulp during dental cavity preparation may be among the most important issues, the latter opening up an avenue for potential painless treatment. Beside the evident short interaction time of laser radiation with the irradiated tissue, scanning of the ultra-short pulse trains turned out to be crucial for ablating cavities of required quality and shape. Additionally, long-pulsed laser systems have demonstrated successfully their suitability for decontamination purposes. In this paper, an overview of different indications for laser application in dental therapies in both pulse regimes is presented. A special focus is set on the decontamination of dental implants in periimplantitis therapy. Having employed commercially available long pulse systems for dental applications and ultra-short 330 fs pulses, we present first results for temperature development and corresponding ablation thresholds for dental implants, as in the future more gentle implant cleaning by ultra-short laser pulses could become of interest.

  1. Surety applications in transportation

    SciTech Connect

    Matalucci, R.V.; Miyoshi, D.S.

    1998-01-01

    Infrastructure surety can make a valuable contribution to the transportation engineering industry. The lessons learned at Sandia National Laboratories in developing surety principles and technologies for the nuclear weapons complex and the nuclear power industry hold direct applications to the safety, security, and reliability of the critical infrastructure. This presentation introduces the concepts of infrastructure surety, including identification of the normal, abnormal, and malevolent threats to the transportation infrastructure. National problems are identified and examples of failures and successes in response to environmental loads and other structural and systemic vulnerabilities are presented. The infrastructure surety principles developed at Sandia National Laboratories are described. Currently available technologies including (a) three-dimensional computer-assisted drawing packages interactively combined with virtual reality systems, (b) the complex calculational and computational modeling and code-coupling capabilities associated with the new generation of supercomputers, and (c) risk-management methodologies with application to solving the national problems associated with threats to the critical transportation infrastructure are discussed.

  2. Clean Energy Application Center

    SciTech Connect

    Freihaut, Jim

    2013-09-30

    The Mid Atlantic Clean Energy Application Center (MACEAC), managed by The Penn State College of Engineering, serves the six states in the Mid-Atlantic region (Pennsylvania, New Jersey, Delaware, Maryland, Virginia and West Virginia) plus the District of Columbia. The goals of the Mid-Atlantic CEAC are to promote the adoption of Combined Heat and Power (CHP), Waste Heat Recovery (WHR) and District Energy Systems (DES) in the Mid Atlantic area through education and technical support to more than 1,200 regional industry and government representatives in the region. The successful promotion of these technologies by the MACEAC was accomplished through the following efforts; (1)The MACEAC developed a series of technology transfer networks with State energy and environmental offices, Association of Energy Engineers local chapters, local community development organizations, utilities and, Penn State Department of Architectural Engineering alumni and their firms to effectively educate local practitioners about the energy utilization, environmental and economic advantages of CHP, WHR and DES; (2) Completed assessments of the regional technical and market potential for CHP, WHR and DE technologies application in the context of state specific energy prices, state energy and efficiency portfolio development. The studies were completed for Pennsylvania, New Jersey and Maryland and included a set of incentive adoption probability models used as a to guide during implementation discussions with State energy policy makers; (3) Using the technical and market assessments and adoption incentive models, the Mid Atlantic CEAC developed regional strategic action plans for the promotion of CHP Application technology for Pennsylvania, New Jersey and Maryland; (4) The CHP market assessment and incentive adoption model information was discussed, on a continuing basis, with relevant state agencies, policy makers and Public Utility Commission organizations resulting in CHP favorable incentive

  3. Web Platform Application

    SciTech Connect

    Paulsworth, Ashley; Kurtz, Jim; Brun de Pontet, Stephanie

    2016-06-15

    Sunvestment Energy Group (previously called Sunvestment Group) was established to create a web application that brings together site hosts, those who will obtain the energy from the solar array, with project developers and funders, including affinity investors. Sunvestment Energy Group (SEG) uses a community-based model that engages with investors who have some affinity with the site host organization. In addition to a financial return, these investors receive non-financial value from their investments and are therefore willing to offer lower cost capital. This enables the site host to enjoy more savings from solar through these less expensive Community Power Purchase Agreements (CPPAs). The purpose of this award was to develop an online platform to bring site hosts and investors together virtually.

  4. Persuasive Mobile Health Applications

    NASA Astrophysics Data System (ADS)

    Garcia Wylie, Carlos; Coulton, Paul

    With many industrialized societies bearing the cost of an increasingly sedentary lifestyle on the health of their populations there is a need to find new ways of encouraging physical activity to promote better health and well being. With the increasing power of mobile phones and the recent emergence of personal heart rate monitors, aimed at dedicated amateur runners, there is now a possibility to develop “Persuasive Mobile Health Applications” to promote well being through the use of real-time physiological data and persuade users to adopt a healthier lifestyle. In this paper we present a novel general health monitoring software for mobile phones called Heart Angel. This software is aimed at helping users monitor, record, as well as improve their fitness level through built-in cardio-respiratory tests, a location tracking application for analyzing heart rate exertion over time and location, and a fun mobile-exergame called Health Defender.

  5. Terahertz technology and applications

    NASA Technical Reports Server (NTRS)

    Siegel, P.

    2002-01-01

    Despite great scientific interest since at least the 1920's, the THz frequency range remains on e of the least tapped regions of the electromagnetic spectrum. Sandwiched between traditional microwave and optical technologies where there is a limited atmospheric propagation path, little commercial emphasis has been placed on THz systems. This has, perhaps fortunately, preserved some unique science and applications for tomorrow's technologies. For over 25 years the sole niche for THz technology has been in the high resolution spectroscopy and remote sensing areas where heterodyne and Fourier transform techniques have allowed astronomers, chemists, Earth, planetary and space scientists to measure, catalog and map thermal emission lines for a wide variety of lightweight molecules. As it turns out, no where else in the electromagnetic spectrum do we receive so much information about these chemical species. In fact, the universe is bathed in THz energy, most of it going unnoticed and undetected.

  6. Laser Applications in Orthodontics

    PubMed Central

    Heidari, Somayeh; Torkan, Sepideh

    2013-01-01

    A laser is a collimated single wavelength of light which delivers a concentrated source of energy. Soon after different types of lasers were invented, investigators began to examine the effects of different wavelengths of laser energy on oral tissues, routine dental procedures and experimental applications. Orthodontists, along with other specialist in different fields of dentistry, can now benefit from several different advantages that lasers provide during the treatment process, from the beginning of the treatment, when separators are placed, to the time of resin residues removal from the tooth surface at the end of orthodontic treatment. This article outlines some of the most common usages of laser beam in orthodontics and also provides a comparison between laser and other conventional method that were the standard of care prior to the advent of laser in this field. PMID:25606324

  7. ICE SLURRY APPLICATIONS

    PubMed Central

    Kauffeld, M.; WANG, M. J.; Goldstein, V.; Kasza, K. E.

    2011-01-01

    The role of secondary refrigerants is expected to grow as the focus on the reduction of greenhouse gas emissions increases. The effectiveness of secondary refrigerants can be improved when phase changing media are introduced in place of single phase media. Operating at temperatures below the freezing point of water, ice slurry facilitates several efficiency improvements such as reductions in pumping energy consumption as well as lowering the required temperature difference in heat exchangers due to the beneficial thermo-physical properties of ice slurry. Research has shown that ice slurry can be engineered to have ideal ice particle characteristics so that it can be easily stored in tanks without agglomeration and then be extractable for pumping at very high ice fraction without plugging. In addition ice slurry can be used in many direct contact food and medical protective cooling applications. This paper provides an overview of the latest developments in ice slurry technology. PMID:21528014

  8. Laser applications in neurosurgery

    NASA Astrophysics Data System (ADS)

    Cerullo, Leonard J.

    1985-09-01

    The "false start" of the laser in neurosurgery should not be misconstrued as a denial of the inherent advantages of precision and gentleness in dealing with neural tissue. Rather, early investigators were frustrated by unrealistic expectations, cumbersome equipment, and a general ignorance of microtechnique. By the early 70s, microneurosurgery was well established, surgical laser equipment for free hand and microlinked application had been developed, and a more realistic view of the limitations of the laser had been established. Consequently, the late 70s really heralded the renaissance of the laser in neurosurgery. Since then, there has been an overwhelming acceptance of the tool in a variety of clinical situations, broadly categorized in five groups. 1)|Perhaps the most generally accepted area is in the removal of extra-axial tumors of the brain and spinal cord. These tumors, benign by histology but treacherous by location, do not present until a significant amount of neurological compensation has already occurred. The application of additional trauma to the neural tissue, whether by further tumor growth or surgical manipulation, frequently results in irreversible damage. Here, the ability of the laser to vaporize tissue, in a fairly hemostatic fashion, without mechanical or thermal damage to sensitive surrounding tissues, is essential. 2)|The ability to incise delicate neural tissue with minimal spread of thermal destruction to adjacent functioning tissue makes the laser the ideal instrument when tumors deep under the surface are encountered in the brain or spinal cord. Thus, the second group of applications is in the transgression of normal neural structures to arrive at deeper pathological tissue. 3)|The third area of benefit for the laser in neurosurgery has been in the performance of neuroablative procedures, calling for deliberate destruction of functioning neural tissue in a controlled fashion. Again, the precision and shape confinement of the destructive

  9. Biomedical applications of collagens.

    PubMed

    Ramshaw, John A M

    2016-05-01

    Collagen-based biomedical materials have developed into important, clinically effective materials used in a range of devices that have gained wide acceptance. These devices come with collagen in various formats, including those based on stabilized natural tissues, those that are based on extracted and purified collagens, and designed composite, biosynthetic materials. Further knowledge on the structure and function of collagens has led to on-going developments and improvements. Among these developments has been the production of recombinant collagen materials that are well defined and are disease free. Most recently, a group of bacterial, non-animal collagens has emerged that may provide an excellent, novel source of collagen for use in biomaterials and other applications. These newer collagens are discussed in detail. They can be modified to direct their function, and they can be fabricated into various formats, including films and sponges, while solutions can also be adapted for use in surface coating technologies.

  10. Applications of magnetic sails

    NASA Astrophysics Data System (ADS)

    Love, S. G.; Andrews, D. G.

    The interplanetary magnetic sail is a low-thrust propulsion device that derives its motive power from the interaction of solar wind ions with the magnetic field of a circular current-bearing loop of superconducting cable. The principal advantage of a magnetic sail is that it produces thrust in opposition to the sun's gravity without consuming any propellant whatsoever. The low acceleration of a magnetic sail restricts its applicability to missions that do not demand rapid changes in velocity. In many cases, though, that disadvantage is overwhelmed by the desirability of a system that does not have to be refuelled. Missions well suited for magnetic sails include propulsion for a robot asteroid surveyor, orbital correction for structures in unstable libration points, motive power for orbital correction near planets with magnetic fields, and aerobraking in planetary ionospheres.

  11. The Booster Applications Facility

    NASA Astrophysics Data System (ADS)

    Goodwin, David P.

    2001-02-01

    In support of the human exploration program, NASA is providing $33 million to the U.S. Department of Energy to construct a radiation simulator, known as the Booster Applications Facility (BAF). The BAF justification is briefly reviewed (e.g., to reduce the radiation risk uncertainties from its present factor of 4 to 15). The BAF beam specifications are provided, as are discussions of the BAF construction schedule and anticipated operating schedules (e.g., initial operation anticipated for October 1, 2002). A breakdown of the BAF construction costs is included and the operating costs are discussed (e.g., $5 to $6 million per year). The BAF laboratory layout and the various types of DOE support for the BAF are summarized, as are the peer reviews of the project. The characteristic parameters of the Alternating Gradient Synchrotron are also included. .

  12. Nanotechnology Applications for Glaucoma.

    PubMed

    Cetinel, Sibel; Montemagno, Carlo

    2016-01-01

    Glaucoma is the second leading cause of blindness worldwide, and the antiglaucoma treatments currently available suffer from various complications. Nanotechnology-based treatments show a great deal of promise in overcoming these complications and form the basis for next-generation glaucoma treatment strategies, with the help of applications such as controlled release, targeted delivery, increased bioavailability, diffusion limitations, and biocompatibility. Significant progress has been made in nanomedicine in the efficiency of antiglaucoma medications, nanofabrication systems such as microelectromechanical systems that remove the limitations of nanodevices, and tissue regeneration vesicles for developing glaucoma treatments not based on intraocular pressure. With the use of these advanced technologies, the prevention of glaucoma-induced blindness will be possible in the near future. Herein, we reviewed the recent advances in nanotechnology-based treatment strategies for glaucoma.

  13. Applications Outside HEP

    NASA Astrophysics Data System (ADS)

    Le Dû, Patrick

    High energy and particle physics has considerable acquired knowledge, expertise and resources that can, when transferred in a realistic way, significantly impact the practice of medical imaging for diagnosis and therapy. This overview introductory talk "from basic science to the clinical reality" intends to show how successful technology transfer between fundamental research in particle physics and medical imaging can be achieved using some specific examples. Using as input, the recent advance of HEP state of the art techniques and tools in detectors developments such as solid state and gaseous detectors, calorimeters, photodetectors, read-out electronics and simulations, some direct applications in medical and molecular imaging will be presented like Positron Emission Tomography (PET) and particle therapy.

  14. Stimulus Application? Not Me

    SciTech Connect

    Wiley, H. S.

    2009-06-01

    I am afraid the situation with respect to the Challenge Grants will be similar in that only a small fraction of the expected deluge of grants will be funded. NIH has provided a very specific list of over 60 topics and a simple calculation shows that only a couple of grants will be funded per topic. Science magazine quotes the Vice Chancellor for Research at the University of California, Irvine as saying that her campus will be submitting “over 200” Challenge Grants. My discussions with friends from other universities suggest that this is a typical response. Even if this is an overestimate by a factor of 2, this would still translate to many thousands of applications flooding into the NIH, putting the payline well below the 4% that I experienced from the DoD. As was the case with the Army grants, I suspect that if the topics are not addressed exactly, grants will not stand a chance.

  15. Applications of modern ferroelectrics.

    PubMed

    Scott, J F

    2007-02-16

    Long viewed as a topic in classical physics, ferroelectricity can be described by a quantum mechanical ab initio theory. Thin-film nanoscale device structures integrated onto Si chips have made inroads into the semiconductor industry. Recent prototype applications include ultrafast switching, cheap room-temperature magnetic-field detectors, piezoelectric nanotubes for microfluidic systems, electrocaloric coolers for computers, phased-array radar, and three-dimensional trenched capacitors for dynamic random access memories. Terabit-per-square-inch ferroelectric arrays of lead zirconate titanate have been reported on Pt nanowire interconnects and nanorings with 5-nanometer diameters. Finally, electron emission from ferroelectrics yields cheap, high-power microwave devices and miniature x-ray and neutron sources.

  16. Panarchy: theory and application

    USGS Publications Warehouse

    Allen, Craig R.; Angeler, David G.; Garmestani, Ahjond S.; Gunderson, Lance H.; Holling, Crawford S.

    2014-01-01

    The concept of panarchy provides a framework that characterizes complex systems of people and nature as dynamically organized and structured within and across scales of space and time. It has been more than a decade since the introduction of panarchy. Over this period, its invocation in peer-reviewed literature has been steadily increasing, but its use remains primarily descriptive and abstract. Here, we discuss the use of the concept in the literature to date, highlight where the concept may be useful, and discuss limitations to the broader applicability of panarchy theory for research in the ecological and social sciences. Finally, we forward a set of testable hypotheses to evaluate key propositions that follow from panarchy theory.

  17. Topography measurements and applications

    NASA Astrophysics Data System (ADS)

    Song, Junfeng; Vorburger, Theodore

    2006-11-01

    Based on auto- and cross-correlation functions (ACF and CCF), a new surface parameter called profile (or topography) difference, D s, has been developed for quantifying differences between 2D profiles or between 3D topographies with a single number. When D s = 0, the two compared 2D profiles or 3D topographies must be exactly the same (point by point). A 2D and 3D topography measurement system was established at NIST. This system includes data acquisition stations using a stylus instrument and a confocal microscope, and a correlation program using the proposed parameters D s and the cross-correlation function maximum CCF max. Applications in forensic science and surface metrology are described; those include profile signature measurements for 40 NIST Standard Reference Material (SRM) 2460 standard bullets, and comparisons of profile measurements with four different techniques. An approach to optimizing the Gaussian filter long wavelength cutoff, λc, is proposed for topography measurements.

  18. Clinical application of ghrelin.

    PubMed

    Strasser, Florian

    2012-01-01

    Ghrelin as a human natural hormone is involved in fundamental regulatory processes of eating and energy balance. Ghrelin signals the nutrient availability from the gastrointestinal tract to the central nervous system, up-regulates food intake and lowers energy expenditure mainly through hypothalamic mediators acting both centrally and peripherally including the gastrointestinal tract (motility, epithelium), promotes both neuro-endocrine and inflammatory signals to increase skeletal muscle growth and decrease protein breakdown, and increases lipolysis while body fat utilization is reduced. Ghrelin does more to exert its probably sentinel role around "human energy": it influences through mainly extra-hypothalamic actions the hedonic and incentive value of food, mood and anxiety, sleep-wake regulation, learning and memory, and neurogenesis. Recently numerous ghrelin gene-derived peptides were discovered, demonstrating the complexity within the ghrelin/ghrelin receptor axis. For clinical applications, not only the natural ghrelin and its slice variants, but also several modified or artificial molecules acting at ghrelin-associated receptors were and are developed. Current clinical applications are limited to clinical studies, focusing mainly on cachexia in chronic heart failure, COPD, cancer, endstage- renal-disease or cystic fibrosis, but also on frailty in elderly, gastrointestinal motility (e.g., gastroparesis, functional dyspepsia, postoperative ileus), after curative gastrectomy, anorexia nervosa, growth hormone deficient patients, alcohol craving, sleep-wake regulation (e.g. major depression), or sympathetic nervous activity in obesity. The results of completed, preliminary studies support the clinical potential of ghrelin, ghrelin gene-derived peptides, and artificial analogues, suggesting that larger clinical trials are demanded to move ghrelin towards an available and reimbursed pharmaceutical intervention.

  19. [Skeleton extractions and applications].

    SciTech Connect

    Quadros, William Roshan

    2010-05-01

    This paper focuses on the extraction of skeletons of CAD models and its applications in finite element (FE) mesh generation. The term 'skeleton of a CAD model' can be visualized as analogous to the 'skeleton of a human body'. The skeletal representations covered in this paper include medial axis transform (MAT), Voronoi diagram (VD), chordal axis transform (CAT), mid surface, digital skeletons, and disconnected skeletons. In the literature, the properties of a skeleton have been utilized in developing various algorithms for extracting skeletons. Three main approaches include: (1) the bisection method where the skeleton exists at equidistant from at least two points on boundary, (2) the grassfire propagation method in which the skeleton exists where the opposing fronts meet, and (3) the duality method where the skeleton is a dual of the object. In the last decade, the author has applied different skeletal representations in all-quad meshing, hex meshing, mid-surface meshing, mesh size function generation, defeaturing, and decomposition. A brief discussion on the related work from other researchers in the area of tri meshing, tet meshing, and anisotropic meshing is also included. This paper concludes by summarizing the strengths and weaknesses of the skeleton-based approaches in solving various geometry-centered problems in FE mesh generation. The skeletons have proved to be a great shape abstraction tool in analyzing the geometric complexity of CAD models as they are symmetric, simpler (reduced dimension), and provide local thickness information. However, skeletons generally require some cleanup, and stability and sensitivity of the skeletons should be controlled during extraction. Also, selecting a suitable application-specific skeleton and a computationally efficient method of extraction is critical.

  20. USAF solar thermal applications overview

    NASA Technical Reports Server (NTRS)

    Hauger, J. S.; Simpson, J. A.

    1981-01-01

    Process heat applications were compared to solar thermal technologies. The generic process heat applications were analyzed for solar thermal technology utilization, using SERI's PROSYS/ECONOMAT model in an end use matching analysis and a separate analysis was made for solar ponds. Solar technologies appear attractive in a large number of applications. Low temperature applications at sites with high insolation and high fuel costs were found to be most attractive. No one solar thermal technology emerges as a clearly universal or preferred technology, however,, solar ponds offer a potential high payoff in a few, selected applications. It was shown that troughs and flat plate systems are cost effective in a large number of applications.

  1. Parallel programming of industrial applications

    SciTech Connect

    Heroux, M; Koniges, A; Simon, H

    1998-07-21

    In the introductory material, we overview the typical MPP environment for real application computing and the special tools available such as parallel debuggers and performance analyzers. Next, we draw from a series of real applications codes and discuss the specific challenges and problems that are encountered in parallelizing these individual applications. The application areas drawn from include biomedical sciences, materials processing and design, plasma and fluid dynamics, and others. We show how it was possible to get a particular application to run efficiently and what steps were necessary. Finally we end with a summary of the lessons learned from these applications and predictions for the future of industrial parallel computing. This tutorial is based on material from a forthcoming book entitled: "Industrial Strength Parallel Computing" to be published by Morgan Kaufmann Publishers (ISBN l-55860-54).

  2. Deaf mobile application accessibility requirements

    NASA Astrophysics Data System (ADS)

    Nathan, Shelena Soosay; Hussain, Azham; Hashim, Nor Laily

    2016-08-01

    Requirement for deaf mobile applications need to be analysed to ensure the disabilities need are instilled into the mobile applications developed for them. Universal design is understandable to comply every user needs, however specific disability is argued by the authors to have different need and requirements. These differences are among the reasons for these applications being developed to target for a specific group of people, however they are less usable and later abandoned. This study focuses on deriving requirements that are needed by the deaf in their mobile applications that are meant specifically for them. Studies on previous literature was conducted it can be concluded that graphic, text, multimedia and sign language interpreter are among mostly required features to be included in their mobile application to ensure the applications are usable for this community.

  3. 76 FR 35411 - Applications for Trademark Registration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-17

    ... Trademark Electronic Application System (TEAS) using a regular TEAS application form or a TEAS Plus application form. Applicants that file their applications using the TEAS Plus form pay a reduced filing fee if... through TEAS, and agree to receive communications concerning the application by e-mail. TEAS...

  4. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  5. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  6. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  7. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  8. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  9. Dynamic load balancing of applications

    DOEpatents

    Wheat, S.R.

    1997-05-13

    An application-level method for dynamically maintaining global load balance on a parallel computer, particularly on massively parallel MIMD computers is disclosed. Global load balancing is achieved by overlapping neighborhoods of processors, where each neighborhood performs local load balancing. The method supports a large class of finite element and finite difference based applications and provides an automatic element management system to which applications are easily integrated. 13 figs.

  10. Dynamic load balancing of applications

    DOEpatents

    Wheat, Stephen R.

    1997-01-01

    An application-level method for dynamically maintaining global load balance on a parallel computer, particularly on massively parallel MIMD computers. Global load balancing is achieved by overlapping neighborhoods of processors, where each neighborhood performs local load balancing. The method supports a large class of finite element and finite difference based applications and provides an automatic element management system to which applications are easily integrated.

  11. Holographic Cinematography And Its Applications

    NASA Astrophysics Data System (ADS)

    Smigielski, Paul

    1987-09-01

    We describe several applications of cineholography to objects scattering light by reflection: single-exposure cineholograms on 126-mm films at a repetition rate of 25 holograms per second for 3-D movies and for flight simulators applications, double-exposure cineholograms for medical and industrial applications (NDT). Limitations of cineholography are also described. The light source used for cineholograms recording is a frequency-doubled pulse YAG-laser.

  12. Microplasmas: from applications to fundamentals

    NASA Astrophysics Data System (ADS)

    Nguon, Olivier; Huang, Sisi; Gauthier, Mario; Karanassios, Vassili

    2014-05-01

    Microplasmas are receiving increasing attention in the scientific literature and in recent conferences. Yet, few analytical applications of microplasmas for elemental analysis using liquid samples have been described in the literature. To address this, we describe two applications: one involves the determination of Zn in microsamples of the metallo-enzyme Super Oxide Dismutase. The other involves determination of Pd-concentration in microsamples of Pd nanocatalysts. These applications demonstrate the potential of microplasmas and point to the need for future fundamental studies.

  13. Applications and limitations of radiomics.

    PubMed

    Yip, Stephen S F; Aerts, Hugo J W L

    2016-07-07

    Radiomics is an emerging field in quantitative imaging that uses advanced imaging features to objectively and quantitatively describe tumour phenotypes. Radiomic features have recently drawn considerable interest due to its potential predictive power for treatment outcomes and cancer genetics, which may have important applications in personalized medicine. In this technical review, we describe applications and challenges of the radiomic field. We will review radiomic application areas and technical issues, as well as proper practices for the designs of radiomic studies.

  14. Applications and limitations of radiomics

    NASA Astrophysics Data System (ADS)

    Yip, Stephen S. F.; Aerts, Hugo J. W. L.

    2016-07-01

    Radiomics is an emerging field in quantitative imaging that uses advanced imaging features to objectively and quantitatively describe tumour phenotypes. Radiomic features have recently drawn considerable interest due to its potential predictive power for treatment outcomes and cancer genetics, which may have important applications in personalized medicine. In this technical review, we describe applications and challenges of the radiomic field. We will review radiomic application areas and technical issues, as well as proper practices for the designs of radiomic studies.

  15. Applications of Probabilistic Risk Assessment

    SciTech Connect

    Burns, K.J.; Chapman, J.R.; Follen, S.M.; O'Regan, P.J. )

    1991-05-01

    This report provides a summary of potential and actual applications of Probabilistic Risk Assessment (PRA) technology and insights. Individual applications are derived from the experiences of a number of US nuclear utilities. This report identifies numerous applications of PRA techniques beyond those typically associated with PRAs. In addition, believing that the future use of PRA techniques should not be limited to those of the past, areas of plant operations, maintenance, and financial resource allocation are discussed. 9 refs., 3 tabs.

  16. Surgical applications of femtosecond lasers.

    PubMed

    Chung, Samuel H; Mazur, Eric

    2009-10-01

    Femtosecond laser ablation permits non-invasive surgeries in the bulk of a sample with submicrometer resolution. We briefly review the history of optical surgery techniques and the experimental background of femtosecond laser ablation. Next, we present several clinical applications, including dental surgery and eye surgery. We then summarize research applications, encompassing cell and tissue studies, research on C. elegans, and studies in zebrafish. We conclude by discussing future trends of femtosecond laser systems and some possible application directions.

  17. Missions and Means Framework Application

    DTIC Science & Technology

    2005-06-22

    Missions and Means Framework Application 25 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting...The Missions and Means Framework Application 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e...Prescribed by ANSI Std Z39-18 The Missions and Means Framework Application Presentation to 73rd MORSS U.S. Military Academy 22 June 2005 Paul

  18. Porous microsphere and its applications

    PubMed Central

    Cai, Yunpeng; Chen, Yinghui; Hong, Xiaoyun; Liu, Zhenguo; Yuan, Weien

    2013-01-01

    Porous microspheres have drawn great attention in the last two decades for their potential applications in many fields, such as carriers for drugs, absorption and desorption of substances, pulmonary drug delivery, and tissue regeneration. The application of porous microspheres has become a feasible way to address existing problems. In this essay, we give a brief introduction of the porous microsphere, its characteristics, preparation methods, applications, and a brief summary of existing problems and research tendencies. PMID:23515359

  19. Pulmonary Testing Laboratory Computer Application

    PubMed Central

    Johnson, Martin E.

    1980-01-01

    An interactive computer application reporting patient pulmonary function data has been developed by Washington, D.C. VA Medical Center staff. A permanent on-line data base of patient demographics, lung capacity, flows, diffusion, arterial blood gases and physician interpretation is maintained by a minicomputer at the hospital. A user oriented application program resulted from development in concert with the clinical users. Rapid program development resulted from employing a newly developed time saving technique that has found wide application at other VA Medical Centers. Careful attention to user interaction has resulted in an application program requiring little training and which has been satisfactorily used by a number of clinicians.

  20. Enabling network-aware applications

    SciTech Connect

    Tierney, Brian L.; Gunter, Dan; Lee, Jason; Stouffer, Martin

    2001-08-01

    Many high performance distributed applications use only a small fraction of their available bandwidth. A common cause of this problem is not a flaw in the application design, but rather improperly tuned network settings. Proper tuning techniques, such as setting the correct TCP buffers and using parallel streams, are well known in the networking community, but outside the networking community they are infrequently applied. In this paper, we describe a service that makes the task of network tuning trivial for application developers and users. Widespread use of this service should virtually eliminate a common stumbling block for high performance distributed applications.

  1. Tools for distributed application management

    NASA Technical Reports Server (NTRS)

    Marzullo, Keith; Wood, Mark; Cooper, Robert; Birman, Kenneth P.

    1990-01-01

    Distributed application management consists of monitoring and controlling an application as it executes in a distributed environment. It encompasses such activities as configuration, initialization, performance monitoring, resource scheduling, and failure response. The Meta system is described: a collection of tools for constructing distributed application management software. Meta provides the mechanism, while the programmer specifies the policy for application management. The policy is manifested as a control program which is a soft real time reactive program. The underlying application is instrumented with a variety of built-in and user defined sensors and actuators. These define the interface between the control program and the application. The control program also has access to a database describing the structure of the application and the characteristics of its environment. Some of the more difficult problems for application management occur when pre-existing, nondistributed programs are integrated into a distributed application for which they may not have been intended. Meta allows management functions to be retrofitted to such programs with a minimum of effort.

  2. Tools for distributed application management

    NASA Technical Reports Server (NTRS)

    Marzullo, Keith; Cooper, Robert; Wood, Mark; Birman, Kenneth P.

    1990-01-01

    Distributed application management consists of monitoring and controlling an application as it executes in a distributed environment. It encompasses such activities as configuration, initialization, performance monitoring, resource scheduling, and failure response. The Meta system (a collection of tools for constructing distributed application management software) is described. Meta provides the mechanism, while the programmer specifies the policy for application management. The policy is manifested as a control program which is a soft real-time reactive program. The underlying application is instrumented with a variety of built-in and user-defined sensors and actuators. These define the interface between the control program and the application. The control program also has access to a database describing the structure of the application and the characteristics of its environment. Some of the more difficult problems for application management occur when preexisting, nondistributed programs are integrated into a distributed application for which they may not have been intended. Meta allows management functions to be retrofitted to such programs with a minimum of effort.

  3. 24 CFR 232.505 - Application and application fee.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Application and application fee. 232.505 Section 232.505 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR HOUSING-FEDERAL HOUSING COMMISSIONER, DEPARTMENT...

  4. Manual control theory and applications. [physiological and neurological applications

    NASA Technical Reports Server (NTRS)

    Sadoff, M.; Repa, B.

    1974-01-01

    Control theory, including manual control theory, and a review of some previous physiological and neurological applications of control theory and associated engineering concepts are reported. The discussion includes a specially tailored battery of critical control tasks that are being developed to monitor astronaut performance in long term orbital flight. The application of these concepts and tasks to patients with various neurological disorders is considered.

  5. Apply Pesticides Correctly, A Guide for Commercial Applicators: Aerial Application.

    ERIC Educational Resources Information Center

    Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

    This guide contains basic information to meet specific standards for pesticide applicators. The text is concerned with the calibration of dry and liquid pesticide systems for aerial application. Additionally, dispersal equipment is discussed with considerations for environmental and safety factors. (CS)

  6. Nanomaterials for Sensor Applications

    SciTech Connect

    Márquez, Francisco; Morant, Carmen

    2015-01-15

    A large part of the advances in nanotechnology have been directed towards the development of highspeed electronics, more efficient catalysts, and sensors. This latter group of applications has great relevance and unprecedented development potential for the coming years. Some of the main objectives for the development of sensors have focused on making more sensitive, effective and specific sensing devices. The improvement of these systems and the increase of specificity are clearly associated with a decrease in size of the components, which can lead to obtaining more rapid action, almost in real time. Nanomaterials currently used in sensor development include a long list of nanostructured systems, as for example: Metal nanotubes, nanowires, nanofibers, nanocomposites, nanorods, nanoparticles, nanostructured polymers, and different allotropes of carbon as carbon nanotubes, graphene or fullerenes, among others [1]. These nanomaterials are characterized by having unique physicochemical properties, including high electrical and thermal conductivity, extremely high surface area/volume ratio, high mechanical strength and even excellent catalytic properties [1] [2]. These materials, may exhibit relevant physicochemical behavior, such as quantization or electronic confinement effects, which can be used in the development of all kinds of sensors [2]. So far, sensors have been developed for determination and quantification of gases, radiation, biomolecules, microorganisms, etc. [2] [3]. The sensors developed so far usually use the system lock and key, wherein the selective receptor (lock) is selectively anchored to the analyte of interest (or key). This system has great limitations when analyzing the analyte in the presence of other analytes, which can alter the sensitivity or specificity of the measure, as occurs in sensors used in biomedical applications [3] [4]. One possible solution is based on the development of sensor arrays, consisting of a combination of different and

  7. Nanomaterials for Sensor Applications

    DOE PAGES

    Márquez, Francisco; Morant, Carmen

    2015-01-15

    A large part of the advances in nanotechnology have been directed towards the development of highspeed electronics, more efficient catalysts, and sensors. This latter group of applications has great relevance and unprecedented development potential for the coming years. Some of the main objectives for the development of sensors have focused on making more sensitive, effective and specific sensing devices. The improvement of these systems and the increase of specificity are clearly associated with a decrease in size of the components, which can lead to obtaining more rapid action, almost in real time. Nanomaterials currently used in sensor development include amore » long list of nanostructured systems, as for example: Metal nanotubes, nanowires, nanofibers, nanocomposites, nanorods, nanoparticles, nanostructured polymers, and different allotropes of carbon as carbon nanotubes, graphene or fullerenes, among others [1]. These nanomaterials are characterized by having unique physicochemical properties, including high electrical and thermal conductivity, extremely high surface area/volume ratio, high mechanical strength and even excellent catalytic properties [1] [2]. These materials, may exhibit relevant physicochemical behavior, such as quantization or electronic confinement effects, which can be used in the development of all kinds of sensors [2]. So far, sensors have been developed for determination and quantification of gases, radiation, biomolecules, microorganisms, etc. [2] [3]. The sensors developed so far usually use the system lock and key, wherein the selective receptor (lock) is selectively anchored to the analyte of interest (or key). This system has great limitations when analyzing the analyte in the presence of other analytes, which can alter the sensitivity or specificity of the measure, as occurs in sensors used in biomedical applications [3] [4]. One possible solution is based on the development of sensor arrays, consisting of a combination of

  8. Scaling Applications in hydrology

    NASA Astrophysics Data System (ADS)

    Gebremichael, Mekonnen

    2010-05-01

    Besides downscaling applications, scaling properties of hydrological fields can be used to address a variety of research questions. In this presentation, we will use scaling properties to address questions related to satellite evapotranspiration algorithms, precipitation-streamflow relationships, and hydrological model calibration. Most of the existing satellite-based evapotranspiration (ET) algorithms have been developed using fine-resolution Landsat TM and ASTER data. However, these algorithms are often applied to coarse-resolution MODIS data. Our results show that applying the satellite-based algorithms, which are developed at ASTER resolution, to MODIS resolution leads to ET estimates that (1) preserve the overall spatial pattern (spatial correlation in excess of 0.90), (2) increase the spatial standard deviation and maximum value, (3) have modest conditional bias: underestimate low ET rates (< 1 mm/day) and overestimate high ET rates; the overestimation is within 20%. The results emphasize the need for exploring alternatives for estimation of ET from MODIS. Understanding the relationship between the scaling properties of precipitation and streamflow is important in a number of applications. We present the results of a detailed river flow fluctuation analysis on daily records from 14 stations in the Flint River basin in Georgia in the United States with focus on effect of watershed area on long memory of river flow fluctuations. The areas of the watersheds draining to the stations range from 22 km2 to 19,606 km2. Results show that large watersheds have more persistent flow fluctuations and stronger long-term (time greater than scale break point) memory than small watersheds while precipitation time series shows weak long-term correlation. We conclude that a watershed acts as a 'filter' for a 'white noise' precipitation with more significant filtering in case of large watersheds. Finally, we compare the scaling properties of simulated and observed spatial soil

  9. Laser applications in surgery

    PubMed Central

    Azadgoli, Beina

    2016-01-01

    In modern medicine, lasers are increasingly utilized for treatment of a variety of pathologies as interest in less invasive treatment modalities intensifies. The physics behind lasers allows the same basic principles to be applied to a multitude of tissue types using slight modifications of the system. Multiple laser systems have been studied within each field of medicine. The term “laser” was combined with “surgery,” “ablation,” “lithotripsy,” “cancer treatment,” “tumor ablation,” “dermatology,” “skin rejuvenation,” “lipolysis,” “cardiology,” “atrial fibrillation (AF),” and “epilepsy” during separate searches in the PubMed database. Original articles that studied the application of laser energy for these conditions were reviewed and included. A review of laser therapy is presented. Laser energy can be safely and effectively used for lithotripsy, for the treatment of various types of cancer, for a multitude of cosmetic and reconstructive procedures, and for the ablation of abnormal conductive pathways. For each of these conditions, management with lasers is comparable to, and potentially superior to, management with more traditional methods. PMID:28090508

  10. Streamers and their applications

    NASA Astrophysics Data System (ADS)

    Pemen, A. J. M.

    2011-10-01

    In this invited lecture we give an overview of our 15 years of experience on streamer plasma research. Efforts are directed to integrating the competence areas of plasma physics, pulsed power technology and chemical processing. The current status is the development of a large scale pulsed corona system for gas treatment. Applications on biogas conditioning, VOC removal, odor abatement and control of traffic emissions have been demonstrated. Detailed research on electrical and chemical processes resulted in a boost of efficiencies. Energy transfer efficiency to the plasma was raised to above 90%. Simultaneous improvement of the plasma chemistry resulted in a highly efficient radical generation: O-radical production up to 50% of the theoretical maximum has been achieved. A major challenge in pulsed power driven streamers is to unravel, understand and ultimately control the complex interactions between the transient plasma, electrical circuits, and process. Even more a challenge is to yield electron energies that fit activation energies of the process. We will discuss our ideas on adjusting pulsed power waveforms and plasma reactor settings to obtain more controlled catalytic processing: the ``Chemical Transistor'' concept.

  11. Applications of quantum cloning

    NASA Astrophysics Data System (ADS)

    Pomarico, E.; Sanguinetti, B.; Sekatski, P.; Zbinden, H.; Gisin, N.

    2011-10-01

    Quantum Cloning Machines (QCMs) allow for the copying of information, within the limits imposed by quantum mechanics. These devices are particularly interesting in the high-gain regime, i.e., when one input qubit generates a state of many output qubits. In this regime, they allow for the study of certain aspects of the quantum to classical transition. The understanding of these aspects is the root of the two recent applications that we will review in this paper: the first one is the Quantum Cloning Radiometer, a device which is able to produce an absolute measure of spectral radiance. This device exploits the fact that in the quantum regime information can be copied with only finite fidelity, whereas when a state becomes macroscopic, this fidelity gradually increases to 1. Measuring the fidelity of the cloning operation then allows to precisely determine the absolute spectral radiance of the input optical source. We will then discuss whether a Quantum Cloning Machine could be used to produce a state visible by the naked human eye, and the possibility of a Bell Experiment with humans playing the role of detectors.

  12. Applications for Subvocal Speech

    NASA Technical Reports Server (NTRS)

    Jorgensen, Charles; Betts, Bradley

    2007-01-01

    A research and development effort now underway is directed toward the use of subvocal speech for communication in settings in which (1) acoustic noise could interfere excessively with ordinary vocal communication and/or (2) acoustic silence or secrecy of communication is required. By "subvocal speech" is meant sub-audible electromyographic (EMG) signals, associated with speech, that are acquired from the surface of the larynx and lingual areas of the throat. Topics addressed in this effort include recognition of the sub-vocal EMG signals that represent specific original words or phrases; transformation (including encoding and/or enciphering) of the signals into forms that are less vulnerable to distortion, degradation, and/or interception; and reconstruction of the original words or phrases at the receiving end of a communication link. Potential applications include ordinary verbal communications among hazardous- material-cleanup workers in protective suits, workers in noisy environments, divers, and firefighters, and secret communications among law-enforcement officers and military personnel in combat and other confrontational situations.

  13. Nanoplasmonics for photovoltaic applications

    NASA Astrophysics Data System (ADS)

    Mammo, Eliyas D.; Marques-Hueso, Jose; Richards, Bryce S.

    2012-06-01

    Plasmonics has become a focus of recent research in photovoltaic applications primarily due to their effects in enhancing the absorption performance of solar cells. In this paper a review of different approaches that have been proposed to integrate plasmonics technologies into solar cells is presented. It has been observed that a range of metallic nanostructures that show plasmon resonance wavelength in the visible and near-infrared regime can be utilized to increase the coupling of light into the solar cell. This is widely used to increase the coupling of light that can be trapped in thin layers of active regions as in thin film technologies. In this review paper, more attention is given to the techniques of fabricating the metallic nanoparticles and the ways to control their plasmon resonance wavelengths. The role of the shape, size, dielectric permittivity of the host and the type of the metallic nanoparticles on tuning the resonance wavelength are analyzed. Furthermore, the cluster of nanoparticles gives different resonance wavelength from the individual nanoparticles due to dipolar coupling among the nanoparticles. In conclusion, we show how the plasmon resonance can be engineered to increase the absorption performance of conventional solar cells.

  14. Medical applications of nanotechnology.

    PubMed

    Zdrojewicz, Zygmunt; Waracki, Mateusz; Bugaj, Bartosz; Pypno, Damian; Cabała, Krzysztof

    2015-10-29

    Nanotechnologies are new areas of research focusing on affecting matter at the atomic and molecular levels. It is beyond doubt that modern medicine can benefit greatly from it; thus nanomedicine has become one of the main branches of nanotechnological research. Currently it focuses on developing new methods of preventing, diagnosing and treating various diseases. Nanomaterials show very high efficiency in destroying cancer cells and are already undergoing clinical trials. The results are so promising that nanomaterials might become an alternative to traditional cancer therapy, mostly due to the fact that they allow cancer cells to be targeted specifically and enable detailed imaging of tissues, making planning further therapy much easier. Nanoscience might also be a source of the needed breakthrough in the fight against atherosclerosis, since nanostructures may be used in both preventing and increasing the stability of atherosclerotic lesions. One area of interest is creating nanomaterials that are not only efficient, but also well tolerated by the human body. Other potential applications of nanotechnology in medicine include: nanoadjuvants with immunomodulatory properties used to deliver vaccine antigens; the nano-knife, an almost non-invasive method of destroying cancer cells with high voltage electricity; and carbon nanotubes, which are already a popular way of repairing damaged tissues and might be used to regenerate nerves in the future. The aim of this article is to outline the potential uses of nanotechnology in medicine. Original articles and reviews have been used to present the new developments and directions of studies.

  15. Dorsal column stimulator applications

    PubMed Central

    Yampolsky, Claudio; Hem, Santiago; Bendersky, Damián

    2012-01-01

    Background: Spinal cord stimulation (SCS) has been used to treat neuropathic pain since 1967. Following that, technological progress, among other advances, helped SCS become an effective tool to reduce pain. Methods: This article is a non-systematic review of the mechanism of action, indications, results, programming parameters, complications, and cost-effectiveness of SCS. Results: In spite of the existence of several studies that try to prove the mechanism of action of SCS, it still remains unknown. The mechanism of action of SCS would be based on the antidromic activation of the dorsal column fibers, which activate the inhibitory interneurons within the dorsal horn. At present, the indications of SCS are being revised constantly, while new applications are being proposed and researched worldwide. Failed back surgery syndrome (FBSS) is the most common indication for SCS, whereas, the complex regional pain syndrome (CRPS) is the second one. Also, this technique is useful in patients with refractory angina and critical limb ischemia, in whom surgical or endovascular treatment cannot be performed. Further indications may be phantom limb pain, chronic intractable pain located in the head, face, neck, or upper extremities, spinal lumbar stenosis in patients who are not surgical candidates, and others. Conclusion: Spinal cord stimulation is a useful tool for neuromodulation, if an accurate patient selection is carried out prior, which should include a trial period. Undoubtedly, this proper selection and a better knowledge of its underlying mechanisms of action, will allow this cutting edge technique to be more acceptable among pain physicians. PMID:23230533

  16. Applications of chiral symmetry

    SciTech Connect

    Pisarski, R.D.

    1995-03-01

    The author discusses several topics in the applications of chiral symmetry at nonzero temperature. First, where does the rho go? The answer: up. The restoration of chiral symmetry at a temperature T{sub {chi}} implies that the {rho} and a{sub 1} vector mesons are degenerate in mass. In a gauged linear sigma model the {rho} mass increases with temperature, m{sub {rho}}(T{sub {chi}}) > m{sub {rho}}(0). The author conjectures that at T{sub {chi}} the thermal {rho} - a{sub 1}, peak is relatively high, at about {approximately}1 GeV, with a width approximately that at zero temperature (up to standard kinematic factors). The {omega} meson also increases in mass, nearly degenerate with the {rho}, but its width grows dramatically with temperature, increasing to at least {approximately}100 MeV by T{sub {chi}}. The author also stresses how utterly remarkable the principle of vector meson dominance is, when viewed from the modern perspective of the renormalization group. Secondly, he discusses the possible appearance of disoriented chiral condensates from {open_quotes}quenched{close_quotes} heavy ion collisions. It appears difficult to obtain large domains of disoriented chiral condensates in the standard two flavor model. This leads to the last topic, which is the phase diagram for QCD with three flavors, and its proximity to the chiral critical point. QCD may be very near this chiral critical point, and one might thereby generated large domains of disoriented chiral condensates.

  17. Application Process Improvement Yields Results.

    ERIC Educational Resources Information Center

    Holesovsky, Jan Paul

    1995-01-01

    After a continuing effort to improve its grant application process, the department of medical microbiology and immunology at the University of Wisconsin-Madison is submitting many more applications and realizing increased funding. The methods and strategy used to make the process more efficient and effective are outlined. (Author/MSE)

  18. Waiver Applicants Steer Wary Course

    ERIC Educational Resources Information Center

    McNeil, Michele

    2012-01-01

    The latest batch of states seeking relief under the No Child Left Behind Act dodge pitfalls that tripped up the first round of applicants. In the latest round of applications for waivers under the No Child Left Behind Act, states have learned lessons from their predecessors and dodged pitfalls that triggered some big revisions from first-round…

  19. Piezoelectric Transformers for Space Applications

    DTIC Science & Technology

    2003-06-01

    TWTA payload configuration is shown in Figure 3. DC Batteries HIGH VOLTAGE CIRCUITS Collectors Cathode Solar Cells Inverter High Voltage... SOLAR PANNELS SPACE- CRAFT PRIMARY POWER BUS 28 V / 42 V THRUSTER HIGH VOLTAGE POWER SUPPLY CONTROL CIRCUIT IGNITION...to a second group of applications. Worldwide companies are now investigating the use of PTs for power applications, including battery chargers

  20. Information Processing Applications: Curriculum Guidelines.

    ERIC Educational Resources Information Center

    Washington Office of the State Superintendent of Public Instruction, Olympia. Div. of Vocational-Technical and Adult Education Services.

    This guide is intended to serve as a resource for business education instructors who are teaching a course in information processing for the automated office. The following topics are covered: program goals, student learning objectives for production applications, an introduction to production applications, a curriculum outline, student learning…

  1. Clinical application of radiolabelled platelets

    SciTech Connect

    Kessler, C. )

    1990-01-01

    This book presents papers on the clinical applications of radiolabelled platelets. The papers are grouped into six sections on platelet labelling techniques, radiolabelled platelets in cardiology, monitoring of antiplatelet therapy, platelet scintigraphy in stroke patients, platelet scintigraphy in angiology, and platelet scintigraphy in hematology and other clinical applications, including renal transplant rejection.

  2. Applications Development: A Wholistic Approach.

    ERIC Educational Resources Information Center

    Miller, Tobey L.

    1982-01-01

    Louisiana State University applied a wholistic philosophy to its computer applications development. The new standards provide a step-by-step plan for the entire application process, from initiation to implementation and maintenance; list required deliverables instead of rules; and allow the programer and analyst flexibility to exercise technical…

  3. Practical Applications of Space Systems.

    ERIC Educational Resources Information Center

    National Academy of Sciences - National Research Council, Washington, DC. Assembly of Engineering.

    This report gives an overview of a study conducted by the Space Applications Board (SAB) on the practical applications of space systems. In this study, the SAB considered how the nation's space capability might be used to solve problems such as the shortage of food and energy; the improvement of the physical environment; inventorying and…

  4. Polarimetric Interferometry - Remote Sensing Applications

    DTIC Science & Technology

    2007-02-01

    This lecture is mainly based on the work of S.R. Cloude and presents examples for remote sensing applications Polarimetric SAR Interferometry...PolInSAR). PolInSAR has its origins in remote sensing and was first developed for applications in 1997 using SIRC L-Band data [1,2]. In its original form it

  5. User interfaces for voice applications.

    PubMed Central

    Kamm, C

    1995-01-01

    This paper discusses some of the aspects of task requirements, user expectations, and technological capabilities that influence the design of a voice interface and then identifies several components of user interfaces that are particularly critical in successful voice applications. Examples from several applications are provided to demonstrate how these components are used to produce effective voice interfaces. PMID:7479721

  6. User interfaces for voice applications.

    PubMed

    Kamm, C

    1995-10-24

    This paper discusses some of the aspects of task requirements, user expectations, and technological capabilities that influence the design of a voice interface and then identifies several components of user interfaces that are particularly critical in successful voice applications. Examples from several applications are provided to demonstrate how these components are used to produce effective voice interfaces.

  7. User Interfaces for Voice Applications

    NASA Astrophysics Data System (ADS)

    Kamm, Candace

    1995-10-01

    This paper discusses some of the aspects of task requirements, user expectations, and technological capabilities that influence the design of a voice interface and then identifies several components of user interfaces that are particularly critical in successful voice applications. Examples from several applications are provided to demonstrate how these components are used to produce effective voice interfaces.

  8. Microwave applicators for BPH thermotherapy

    NASA Astrophysics Data System (ADS)

    Vrba, Jan; Hlavac, R.; Herza, Jan; Chovanec, Roman; Cvek, Jakub; Oppl, L.

    2004-04-01

    Paper deals with new results in the field of intracavitary microwave applicators used for Benign Prostatic Hyperplasia (BPH) treatment. We demonstrate here that it is necessary to use more sophisticated applicators than a simple monopole radiating structure. One of the good possibilities for safe and efficient treatments we propose here is a helix structure.

  9. Evaluating Application Resilience with XRay

    SciTech Connect

    Chen, Sui; Bronevetsky, Greg; Li, Bin; Casas-Guix, Marc; Peng, Lu

    2015-05-07

    The rising count and shrinking feature size of transistors within modern computers is making them increasingly vulnerable to various types of soft faults. This problem is especially acute in high-performance computing (HPC) systems used for scientific computing, because these systems include many thousands of compute cores and nodes, all of which may be utilized in a single large-scale run. The increasing vulnerability of HPC applications to errors induced by soft faults is motivating extensive work on techniques to make these applications more resiilent to such faults, ranging from generic techniques such as replication or checkpoint/restart to algorithmspecific error detection and tolerance techniques. Effective use of such techniques requires a detailed understanding of how a given application is affected by soft faults to ensure that (i) efforts to improve application resilience are spent in the code regions most vulnerable to faults and (ii) the appropriate resilience technique is applied to each code region. This paper presents XRay, a tool to view the application vulnerability to soft errors, and illustrates how XRay can be used in the context of a representative application. In addition to providing actionable insights into application behavior XRay automatically selects the number of fault injection experiments required to provide an informative view of application behavior, ensuring that the information is statistically well-grounded without performing unnecessary experiments.

  10. Processor Emulator with Benchmark Applications

    SciTech Connect

    Lloyd, G. Scott; Pearce, Roger; Gokhale, Maya

    2015-11-13

    A processor emulator and a suite of benchmark applications have been developed to assist in characterizing the performance of data-centric workloads on current and future computer architectures. Some of the applications have been collected from other open source projects. For more details on the emulator and an example of its usage, see reference [1].

  11. HPRR operating experience and applications

    SciTech Connect

    Bailiff, E.G.; Sims, C.S.; Swaja, R.E.

    1986-01-01

    The Health Physics Research Reactor (HPRR) is a small, unmoderated fast pulse reactor located at the Oak Ridge National Laboratory (ORNL). The HPRR is the principal research tool of ORNL's Dosimetry Applications Research (DOSAR) Group. The reactor is described, its operating experience is presented, and its major applications are discussed.

  12. NAS Applications and Advanced Algorithms

    NASA Technical Reports Server (NTRS)

    Bailey, David H.; Biswas, Rupak; VanDerWijngaart, Rob; Kutler, Paul (Technical Monitor)

    1997-01-01

    This paper examines the applications most commonly run on the supercomputers at the Numerical Aerospace Simulation (NAS) facility. It analyzes the extent to which such applications are fundamentally oriented to vector computers, and whether or not they can be efficiently implemented on hierarchical memory machines, such as systems with cache memories and highly parallel, distributed memory systems.

  13. Automatix Incorporated in aerospace applications

    NASA Astrophysics Data System (ADS)

    Hilmer, C.

    1983-03-01

    Robotic assembly and artificial vision applications are currently employed or have potential in aerospace manufacturing. Automatix vision guided robotics have been used for electronic component assembly, welding of aluminum alloys with both gas metal arc welding (MIG). Other applications include gas tungsten arc welding (TIG), and visual gauging. The unique control concept has provided a single robotic controller with virtual robotic arm interchangeability.

  14. Printing Technologies for Medical Applications.

    PubMed

    Shafiee, Ashkan; Atala, Anthony

    2016-03-01

    Over the past 15 years, printers have been increasingly utilized for biomedical applications in various areas of medicine and tissue engineering. This review discusses the current and future applications of 3D bioprinting. Several 3D printing tools with broad applications from surgical planning to 3D models are being created, such as liver replicas and intermediate splints. Numerous researchers are exploring this technique to pattern cells or fabricate several different tissues and organs, such as blood vessels or cardiac patches. Current investigations in bioprinting applications are yielding further advances. As one of the fastest areas of industry expansion, 3D additive manufacturing will change techniques across biomedical applications, from research and testing models to surgical planning, device manufacturing, and tissue or organ replacement.

  15. Studies on deaf mobile application

    NASA Astrophysics Data System (ADS)

    Nathan, Shelena Soosay; Hussain, Azham; Hashim, Nor Laily

    2016-08-01

    The deaf normally considered to be disabled that do not need any mobile technology due to the inabilities of hearing and talking. However, many deaf are using mobile phone in their daily life for various purposes such as communication and learning. Many studies have attempted to identify the need of deaf people in mobile application and level of usage of the applications. This study aims in studying the recent research conducted on deaf mobile application to understand the level of importance of mobile technology for this disabled community. This paper enable identification of studies conducted are limited and the need of more research done of this disabled people to ensure their privilege of using mobile technology and its application, which leads to the identification of deaf user requirement for mobile application as future study.

  16. Corrugated pipe adhesive applicator apparatus

    DOEpatents

    Shirey, R.A.

    1983-06-14

    Apparatus for coating selected portions of the troughs of a corrugated pipe with an adhesive includes a support disposed within the pipe with a reservoir containing the adhesive disposed on the support. A pump, including a spout, is utilized for supplying the adhesive from the reservoir to a trough of the pipe. A rotatable applicator is supported on the support and contacts the trough of the pipe. The applicator itself is sized so as to fit within the trough, and contacts the adhesive in the trough and spreads the adhesive in the trough upon rotation. A trough shield, supported by the support and disposed in the path of rotation of the applicator, is utilized to prevent the applicator from contacting selected portions of the trough. A locator head is also disposed on the support and provides a way for aligning the spout, the applicator, and the trough shield with the trough. 4 figs.

  17. Steering UNICORE applications with VISIT.

    PubMed

    Eickermann, Thomas; Frings, Wolfgang; Gibbon, Paul; Kirtchakova, Lidia; Mallmann, Daniel; Visser, Anke

    2005-08-15

    The UNICORE (UNiform Interface to COmputing REsources) software provides a Grid infrastructure together with a computing portal for engineers and scientists to access supercomputer centres from anywhere on the Internet. While UNICORE is primarily designed for the submission and control of batch jobs, it is also feasible to establish an on-line connection between an application and the UNICORE user-client. This opens up the possibility of performing on-line visualization and computational steering of applications under UNICORE control while maintaining the security provided by this system. This contribution describes the design of a steering extension to UNICORE based on the steering toolkit VISIT (VISualization Interface Toolkit). VISIT is a lightweight library that supports bidirectional data exchange between visualizations and parallel applications. As an example application, a parallel simulation of a laser-plasma interaction that can be steered by an AVS/Express application is presented.

  18. Functionalized carbon nanotubes: biomedical applications

    PubMed Central

    Vardharajula, Sandhya; Ali, Sk Z; Tiwari, Pooja M; Eroğlu, Erdal; Vig, Komal; Dennis, Vida A; Singh, Shree R

    2012-01-01

    Carbon nanotubes (CNTs) are emerging as novel nanomaterials for various biomedical applications. CNTs can be used to deliver a variety of therapeutic agents, including biomolecules, to the target disease sites. In addition, their unparalleled optical and electrical properties make them excellent candidates for bioimaging and other biomedical applications. However, the high cytotoxicity of CNTs limits their use in humans and many biological systems. The biocompatibility and low cytotoxicity of CNTs are attributed to size, dose, duration, testing systems, and surface functionalization. The functionalization of CNTs improves their solubility and biocompatibility and alters their cellular interaction pathways, resulting in much-reduced cytotoxic effects. Functionalized CNTs are promising novel materials for a variety of biomedical applications. These potential applications are particularly enhanced by their ability to penetrate biological membranes with relatively low cytotoxicity. This review is directed towards the overview of CNTs and their functionalization for biomedical applications with minimal cytotoxicity. PMID:23091380

  19. Ultrafast fiber lasers: practical applications

    NASA Astrophysics Data System (ADS)

    Pastirk, Igor; Sell, Alexander; Herda, Robert; Brodschelm, Andreas; Zach, Armin

    2015-05-01

    Over past three decades ultrafast lasers have come a long way from the bulky, demanding and very sensitive scientific research projects to widely available commercial products. For the majority of this period the titanium-sapphire-based ultrafast systems were the workhorse for scientific and emerging industrial and biomedical applications. However the complexity and intrinsic bulkiness of solid state lasers have prevented even larger penetration into wider array of practical applications. With emergence of femtosecond fiber lasers, based primarily on Er-doped and Yb-doped fibers that provide compact, inexpensive and dependable fs and ps pulses, new practical applications have become a reality. The overview of current state of the art ultrafast fiber sources, their basic principles and most prominent applications will be presented, including micromachining and biomedical implementations (ophthalmology) on one end of the pulse energy spectrum and 3D lithography and THz applications on the other.

  20. NGI performance for teleradiology applications

    NASA Astrophysics Data System (ADS)

    Mogel, Greg T.; Huang, H. K.; Cao, Fei; Zhou, Zheng; Dey, Partha S.; Gill, Michael J.; Liu, Brent J.

    2002-05-01

    Tele-medical imaging applications require low cost, and high-speed backbone wide area networks (WAN) to carry large amount of imaging data for rapid turn around interpretation. Current low cost commercially WAN is too slow for medical imaging applications, while high speed WAN is too costly. The next generation Internet (NGI) or Internet2 is federal initiatives for the integration of higher speed backbone communication networks (up to 2.4 Gbits/sec) as a means to replace the current inadequate Internet for many applications including medical imaging. This paper describes our preliminary experience of connecting to Internet2 for teleradiology application. A case study is given for the NGI WAN connection between Childrens Hospital Los Angeles and National Library of Medicine. NGI WAN performance for different image modalities, measured in throughput rate and application response time, were obtained and then compared to the T1 WAN connection between Childrens Hospital Los Angeles and Saint John's Health Center Santa Monica.

  1. Functionalized carbon nanotubes: biomedical applications.

    PubMed

    Vardharajula, Sandhya; Ali, Sk Z; Tiwari, Pooja M; Eroğlu, Erdal; Vig, Komal; Dennis, Vida A; Singh, Shree R

    2012-01-01

    Carbon nanotubes (CNTs) are emerging as novel nanomaterials for various biomedical applications. CNTs can be used to deliver a variety of therapeutic agents, including biomolecules, to the target disease sites. In addition, their unparalleled optical and electrical properties make them excellent candidates for bioimaging and other biomedical applications. However, the high cytotoxicity of CNTs limits their use in humans and many biological systems. The biocompatibility and low cytotoxicity of CNTs are attributed to size, dose, duration, testing systems, and surface functionalization. The functionalization of CNTs improves their solubility and biocompatibility and alters their cellular interaction pathways, resulting in much-reduced cytotoxic effects. Functionalized CNTs are promising novel materials for a variety of biomedical applications. These potential applications are particularly enhanced by their ability to penetrate biological membranes with relatively low cytotoxicity. This review is directed towards the overview of CNTs and their functionalization for biomedical applications with minimal cytotoxicity.

  2. Corrugated pipe adhesive applicator apparatus

    DOEpatents

    Shirey, Ray A.

    1983-06-14

    Apparatus for coating selected portions of the troughs of a corrugated pipe within an adhesive includes a support disposed within the pipe with a reservoir containing the adhesive disposed on the support. A pump, including a spout, is utilized for supplying the adhesive from the reservoir to a trough of the pipe. A rotatable applicator is supported on the support and contacts the trough of the pipe. The applicator itself is sized so as to fit within the trough, and contacts the adhesive in the trough and spreads the adhesive in the trough upon rotation. A trough shield, supported by the support and disposed in the path of rotation of the applicator, is utilized to prevent the applicator from contacting selected portions of the trough. A locator head is also disposed on the support and provides a way for aligning the spout, the applicator, and the trough shield with the trough.

  3. Java Application Shell: A Framework for Piecing Together Java Applications

    NASA Technical Reports Server (NTRS)

    Miller, Philip; Powers, Edward I. (Technical Monitor)

    2001-01-01

    This session describes the architecture of Java Application Shell (JAS), a Swing-based framework for developing interactive Java applications. Java Application Shell is being developed by Commerce One, Inc. for NASA Goddard Space Flight Center Code 588. The purpose of JAS is to provide a framework for the development of Java applications, providing features that enable the development process to be more efficient, consistent and flexible. Fundamentally, JAS is based upon an architecture where an application is considered a collection of 'plugins'. In turn, a plug-in is a collection of Swing actions defined using XML and packaged in a jar file. Plug-ins may be local to the host platform or remotely-accessible through HTTP. Local and remote plugins are automatically discovered by JAS upon application startup; plugins may also be loaded dynamically without having to re-start the application. Using Extensible Markup Language (XML) to define actions, as opposed to hardcoding them in application logic, allows easier customization of application-specific operations by separating application logic from presentation. Through XML, a developer defines an action that may appear on any number of menus, toolbars, and buttons. Actions maintain and propagate enable/disable states and specify icons, tool-tips, titles, etc. Furthermore, JAS allows actions to be implemented using various scripting languages through the use of IBM's Bean Scripting Framework. Scripted action implementation is seamless to the end-user. In addition to action implementation, scripts may be used for application and unit-level testing. In the case of application-level testing, JAS has hooks to assist a script in simulating end-user input. JAS also provides property and user preference management, JavaHelp, Undo/Redo, Multi-Document Interface, Single-Document Interface, printing, and logging. Finally, Jini technology has also been included into the framework by means of a Jini services browser and the

  4. Applications of multilayer optics

    NASA Astrophysics Data System (ADS)

    Wang, Zhanshan; Zhu, Jingtao; Mu, Baozhong; Zhang, Zhong; Wang, Fengli; Xu, Jing; Li, Wenbin; Chen, Lingyan

    2010-11-01

    Recent development of multilayer mirror and its applications in extreme ultraviolet (EUV), soft X-ray ranges in China was reviewed in this paper. Three types of multilayer mirrors were developed with special performance for dense plasma diagnostics, EUV astronomical observation. Firstly, dual-periodic W/B 4C multilayer mirror was designed for Kirkpatrick-Baez (K-B) microscopy working at TiKα line (4.75 keV), which is highly reflective both at hard X-ray (CuKα line at 8.05 keV) and soft X-ray (4.75 keV). Using this mirror, the K-B system can be aligned conveniently in air using hard X-ray instead of in vacuum. The second mirror is aperiodic Mg/SiC multilayer, also a bi-functional mirror with high reflectivity for He-II emission line (30.4 nm) but suppressing He-I emission line (58.4 nm) in astronomy observation, which will replace the traditional combination of periodic multilayer and the fragile film filter. This will be more safe in satellite launching. The third mirror is Mo/Si periodic multilayer, depositing on a parabolic substrate with diameter of 230 mm, which is designed for EUV telescope for imaging of solar corona by selecting Fe-XII emission (19.5 nm). The uniformity of lateral layer thickness distribution is within ±0.3% along the diameter of mirror, measured by X-ray reflectometry. The measured peak reflectivity is 42% at the wavelength of 19.5 nm. All these multilayer mirrors were prepared by using magnetron sputtering system in our group.

  5. Security Data Warehouse Application

    NASA Technical Reports Server (NTRS)

    Vernon, Lynn R.; Hennan, Robert; Ortiz, Chris; Gonzalez, Steve; Roane, John

    2012-01-01

    The Security Data Warehouse (SDW) is used to aggregate and correlate all JSC IT security data. This includes IT asset inventory such as operating systems and patch levels, users, user logins, remote access dial-in and VPN, and vulnerability tracking and reporting. The correlation of this data allows for an integrated understanding of current security issues and systems by providing this data in a format that associates it to an individual host. The cornerstone of the SDW is its unique host-mapping algorithm that has undergone extensive field tests, and provides a high degree of accuracy. The algorithm comprises two parts. The first part employs fuzzy logic to derive a best-guess host assignment using incomplete sensor data. The second part is logic to identify and correct errors in the database, based on subsequent, more complete data. Host records are automatically split or merged, as appropriate. The process had to be refined and thoroughly tested before the SDW deployment was feasible. Complexity was increased by adding the dimension of time. The SDW correlates all data with its relationship to time. This lends support to forensic investigations, audits, and overall situational awareness. Another important feature of the SDW architecture is that all of the underlying complexities of the data model and host-mapping algorithm are encapsulated in an easy-to-use and understandable Perl language Application Programming Interface (API). This allows the SDW to be quickly augmented with additional sensors using minimal coding and testing. It also supports rapid generation of ad hoc reports and integration with other information systems.

  6. Nanotechnology: Principles and Applications

    NASA Astrophysics Data System (ADS)

    Logothetidis, S.

    Nanotechnology is one of the leading scientific fields today since it combines knowledge from the fields of Physics, Chemistry, Biology, Medicine, Informatics, and Engineering. It is an emerging technological field with great potential to lead in great breakthroughs that can be applied in real life. Novel nano- and biomaterials, and nanodevices are fabricated and controlled by nanotechnology tools and techniques, which investigate and tune the properties, responses, and functions of living and non-living matter, at sizes below 100 nm. The application and use of nanomaterials in electronic and mechanical devices, in optical and magnetic components, quantum computing, tissue engineering, and other biotechnologies, with smallest features, widths well below 100 nm, are the economically most important parts of the nanotechnology nowadays and presumably in the near future. The number of nanoproducts is rapidly growing since more and more nanoengineered materials are reaching the global market The continuous revolution in nanotechnology will result in the fabrication of nanomaterials with properties and functionalities which are going to have positive changes in the lives of our citizens, be it in health, environment, electronics or any other field. In the energy generation challenge where the conventional fuel resources cannot remain the dominant energy source, taking into account the increasing consumption demand and the CO2 emissions alternative renewable energy sources based on new technologies have to be promoted. Innovative solar cell technologies that utilize nanostructured materials and composite systems such as organic photovoltaics offer great technological potential due to their attractive properties such as the potential of large-scale and low-cost roll-to-roll manufacturing processes The advances in nanomaterials necessitate parallel progress of the nanometrology tools and techniques to characterize and manipulate nanostructures. Revolutionary new approaches

  7. The future of stochastic and upscaling methods in hydrogeology

    NASA Astrophysics Data System (ADS)

    Nœtinger, Benoît; Artus, Vincent; Zargar, Ghassem

    2005-03-01

    and sensitivity studies in a global multiscale framework is emphasized. In particular, upscaling can help in finding the parameters that control the overall behavior of the flow. Finally, upscaling approaches of non-linear transport equations appear as a new frontier in this area of research. Les formations géologiques sont des entités complexes résultant de processus géologiques, mécaniques et physico-chimiques, à de larges palettes d'échelles de temps et d'espace. Les phénomènes de transport, qui sont définis de l'échelle moléculaire à l'échelle pluri-kilométrique, peut influencer le comportement global des écoulements dans les formations. Les hétérogénéités qui recouvrent plusieurs échelles spatiales jouent un rôle essentiel pour les écoulements canaliser, et plus spécialement lorsque les écoulements sont couplés avec des non-linéarités inhérentes aux processus de transport dans les milieux poreux. Les problémes ont une importance pratique considérable sur la gestion de l'eau souterraine, et dans l'industrie du pétrole, et plus particulièrement pour la résolution de nouveaux problèmes po sés par les projets concernés par le piégeage du CO2 en subsurface. De manière à gérer cette complexité, il faut être capable de donner la priorité aux influences respectives des phénomènes géologiques et physico-chimiques utiles, intervenant à différentes échelles de temps et d'espace, et comprendre et utiliser les modèles géostatistiques, riches et complexes, permettant de se munir de simulations réalistes des conditions de sub-surface. Les simulations de l'écoulement à plusieurs échelles, dans ces formations, peuvent aider les ingénieurs à se focaliser sur les phénomènes cruciaux qui contrôlent l'écoulement. Ceci apporte un cadre de travail pour intégrer les données, résoudre les problèmes inverses impliquant une grande quantité de données, résultant en une réduction de l'incertitude de la description de la

  8. Transform coding for space applications

    NASA Technical Reports Server (NTRS)

    Glover, Daniel

    1993-01-01

    Data compression coding requirements for aerospace applications differ somewhat from the compression requirements for entertainment systems. On the one hand, entertainment applications are bit rate driven with the goal of getting the best quality possible with a given bandwidth. Science applications are quality driven with the goal of getting the lowest bit rate for a given level of reconstruction quality. In the past, the required quality level has been nothing less than perfect allowing only the use of lossless compression methods (if that). With the advent of better, faster, cheaper missions, an opportunity has arisen for lossy data compression methods to find a use in science applications as requirements for perfect quality reconstruction runs into cost constraints. This paper presents a review of the data compression problem from the space application perspective. Transform coding techniques are described and some simple, integer transforms are presented. The application of these transforms to space-based data compression problems is discussed. Integer transforms have an advantage over conventional transforms in computational complexity. Space applications are different from broadcast or entertainment in that it is desirable to have a simple encoder (in space) and tolerate a more complicated decoder (on the ground) rather than vice versa. Energy compaction with new transforms are compared with the Walsh-Hadamard (WHT), Discrete Cosine (DCT), and Integer Cosine (ICT) transforms.

  9. 42 CFR 435.907 - Written application.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 4 2012-10-01 2012-10-01 false Written application. 435.907 Section 435.907 Public..., AND AMERICAN SAMOA Eligibility in the States and District of Columbia Applications § 435.907 Written application. (a) The agency must require a written application from the applicant, an...

  10. 42 CFR 435.907 - Written application.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Written application. 435.907 Section 435.907 Public..., AND AMERICAN SAMOA Eligibility in the States and District of Columbia Applications § 435.907 Written application. (a) The agency must require a written application from the applicant, an...

  11. 42 CFR 435.907 - Written application.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 4 2011-10-01 2011-10-01 false Written application. 435.907 Section 435.907 Public..., AND AMERICAN SAMOA Eligibility in the States and District of Columbia Applications § 435.907 Written application. (a) The agency must require a written application from the applicant, an...

  12. 75 FR 23227 - Initial Patent Applications

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-03

    ... renewal. Previously, the utility, design, and plant applications were broken out in a manner that helped... New Plant 7 hours and 36 minutes 350 2,660 Applications--Application Data Sheet. Original New Design 5... Divisional Applications. Plant Continuation/Divisional 2 hours and 12 minutes 150 330 Applications....

  13. 33 CFR 125.21 - Applications.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... oath in writing and shall include applicant's answers in full to inquiries with respect to such matters... application also shall include applicant's complete identification, citizenship record, personal description, military record, if any, and a statement of the applicant's sponsor certifying the applicant's...

  14. Alginate: properties and biomedical applications

    PubMed Central

    Lee, Kuen Yong; Mooney, David J.

    2011-01-01

    Alginate is a biomaterial that has found numerous applications in biomedical science and engineering due to its favorable properties, including biocompatibility and ease of gelation. Alginate hydrogels have been particularly attractive in wound healing, drug delivery, and tissue engineering applications to date, as these gels retain structural similarity to the extracellular matrices in tissues and can be manipulated to play several critical roles. This review will provide a comprehensive overview of general properties of alginate and its hydrogels, their biomedical applications, and suggest new perspectives for future studies with these polymers. PMID:22125349

  15. ELECTRICAL TECHNIQUES FOR ENGINEERING APPLICATIONS.

    USGS Publications Warehouse

    Bisdorf, Robert J.

    1985-01-01

    Surface electrical geophysical methods have been used in such engineering applications as locating and delineating shallow gravel deposits, depth to bedrock, faults, clay zones, and other geological phenomena. Other engineering applications include determining water quality, tracing ground water contaminant plumes and locating dam seepages. Various methods and electrode arrays are employed to solve particular geological problems. The sensitivity of a particular method or electrode array depends upon the physics on which the method is based, the array geometry, the electrical contrast between the target and host materials, and the depth to the target. Each of the available electrical methods has its own particular advantages and applications which the paper discusses.

  16. Visualizing Twenty Years of Applications

    SciTech Connect

    Potel, Mike; Wong, Pak C.

    2014-11-01

    This issue of IEEE Computer Graphics and Applications marks the 20th anniversary of the Applications department as a regular feature of the magazine. We thought it might be interesting to look back at the 20 years of Applications department articles to assess its evolution over that time. By aggregating all twenty years of articles and applying a little statistical and visual analytics, we’ve uncovered some interesting characteristics and trends we thought we’d share to mark this 20 year milestone.

  17. Bistable Mechanisms for Space Applications.

    PubMed

    Zirbel, Shannon A; Tolman, Kyler A; Trease, Brian P; Howell, Larry L

    2016-01-01

    Compliant bistable mechanisms are monolithic devices with two stable equilibrium positions separated by an unstable equilibrium position. They show promise in space applications as nonexplosive release mechanisms in deployment systems, thereby eliminating friction and improving the reliability and precision of those mechanical devices. This paper presents both analytical and numerical models that are used to predict bistable behavior and can be used to create bistable mechanisms in materials not previously feasible for compliant mechanisms. Materials compatible with space applications are evaluated for use as bistable mechanisms and prototypes are fabricated in three different materials. Pin-puller and cutter release mechanisms are proposed as potential space applications.

  18. NASA Applications of Molecular Nanotechnology

    NASA Technical Reports Server (NTRS)

    Globus, Al; Bailey, David; Han, Jie; Jaffe, Richard; Levit, Creon; Merkle, Ralph; Srivastava, Deepak

    1998-01-01

    Laboratories throughout the world are rapidly gaining atomically precise control over matter. As this control extends to an ever wider variety of materials, processes and devices, opportunities for applications relevant to NASA's missions will be created. This document surveys a number of future molecular nanotechnology capabilities of aerospace interest. Computer applications, launch vehicle improvements, and active materials appear to be of particular interest. We also list a number of applications for each of NASA's enterprises. If advanced molecular nanotechnology can be developed, almost all of NASA's endeavors will be radically improved. In particular, a sufficiently advanced molecular nanotechnology can arguably bring large scale space colonization within our grasp.

  19. Application specific serial arithmetic arrays

    NASA Technical Reports Server (NTRS)

    Winters, K.; Mathews, D.; Thompson, T.

    1990-01-01

    High performance systolic arrays of serial-parallel multiplier elements may be rapidly constructed for specific applications by applying hardware description language techniques to a library of full-custom CMOS building blocks. Single clock pre-charged circuits have been implemented for these arrays at clock rates in excess of 100 Mhz using economical 2-micron (minimum feature size) CMOS processes, which may be quickly configured for a variety of applications. A number of application-specific arrays are presented, including a 2-D convolver for image processing, an integer polynomial solver, and a finite-field polynomial solver.

  20. Industrial Application Of Instant Holography

    NASA Astrophysics Data System (ADS)

    Schorner, J.; Rottenkolber, H.

    1983-10-01

    The development of holographic test methods has lead to a wide industrial application. Today serial tests of aircraft tyres with holography have become routine. A large chemical company is testing their plastic materials like tanks, wheels and fans with the method of holographic interferometry. In the power engine industry turbine blades are tested holographically to find an optimal shape and to test the vibration behaviour. The automotive industry is using holographic methods' for construction optimization. The economic application of these test methods was possible by using instant holography. The principle of a new hologramrecorder is presented. The application of this equipment is shown in examples of testing materials, optimizing constructions and vibration analysis.

  1. Nanomaterials for Space Exploration Applications

    NASA Technical Reports Server (NTRS)

    Moloney, Padraig G.

    2006-01-01

    Nano-engineered materials are multi-functional materials with superior mechanical, thermal and electrical properties. Nanomaterials may be used for a variety of space exploration applications, including ultracapacitors, active/passive thermal management materials, and nanofiltration for water recovery. Additional applications include electrical power/energy storage systems, hybrid systems power generation, advanced proton exchange membrane fuel cells, and air revitalization. The need for nanomaterials and their growth, characterization, processing and space exploration applications is discussed. Data is presented for developing solid-supported amine adsorbents based on carbon nanotube materials and functionalization of nanomaterials is examined.

  2. Austempered Materials for Powertrain Applications

    NASA Astrophysics Data System (ADS)

    Lefevre, Justin; Hayrynen, Kathy L.

    2013-07-01

    Austempered irons and steels offer the design engineer alternatives to conventional material/process combinations. Depending on the material and the application, Austempering may provide the following benefits to producers of powertrain components such as gears and shafts: ease of manufacturing, increased bending and/or contact fatigue strength, better wear resistance and enhanced dampening characteristics resulting in lower noise. Austempered materials have been used to improve the performance of powertrain components in numerous applications for a wide range of industries, from gears and shafts to clutch plates and crankshafts. This paper focuses on Austempered solutions for powertrain applications with an emphasis on gear and shaft solutions.

  3. Bistable Mechanisms for Space Applications

    PubMed Central

    Zirbel, Shannon A.; Tolman, Kyler A.; Trease, Brian P.

    2016-01-01

    Compliant bistable mechanisms are monolithic devices with two stable equilibrium positions separated by an unstable equilibrium position. They show promise in space applications as nonexplosive release mechanisms in deployment systems, thereby eliminating friction and improving the reliability and precision of those mechanical devices. This paper presents both analytical and numerical models that are used to predict bistable behavior and can be used to create bistable mechanisms in materials not previously feasible for compliant mechanisms. Materials compatible with space applications are evaluated for use as bistable mechanisms and prototypes are fabricated in three different materials. Pin-puller and cutter release mechanisms are proposed as potential space applications. PMID:28030588

  4. Ultrasonics: Fundamentals, Technologies, and Applications

    SciTech Connect

    Ensminger, Dale; Bond, Leonard J.

    2011-09-17

    This is a new edition of a bestselling industry reference. Discusses the science, technology, and applications of low and high power ultrasonics, including industrial implementations and medical uses. Reviews the basic equations of acoustics, starting from basic wave equations and their applications. New material on property determination, inspection of metals (NDT) and non-metals, imaging, process monitoring and control. Expanded discussion of transducers, transducer wave-fields, scattering, attenuation and measurement systems and models. New material that discusses high power ultrasonics - in particular using mechanical effects and sonochemistry, including applications to nano-materials. Examines diagnosis, therapy, and surgery from a technology and medical physics perspective.

  5. User clustering in smartphone applications.

    PubMed

    Schaefers, Klaus; Ribeiro, David

    2012-01-01

    In the context of mobile health applications usability is a crucial factor to achieve user acceptance. The successful user interface (UI) design requires a deep understanding of the needs and requirements of the targeted audience. This paper explores the application of the K-Means algorithm on smartphone usage data in order to offer Human Computer Interaction (HCI) specialists a better insight into their user group. Two different feature space representations are introduced and used to identify persona like stereotypes in a real world data set, which was obtained from a public available smartphone application.

  6. Application of Smart Solid State Sensor Technology in Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Hunter, Gary W.; Xu, Jennifer C.; Dungan, L.K.; Makel, D.; Ward, B.; Androjna, D.

    2008-01-01

    Aerospace applications require a range of chemical sensing technologies to monitor conditions in both space vehicles and aircraft operations. One example is the monitoring of oxygen. For example, monitoring of ambient oxygen (O2) levels is critical to ensuring the health, safety, and performance of humans living and working in space. Oxygen sensors can also be incorporated in detection systems to determine if hazardous leaks are occurring in space propulsion systems and storage facilities. In aeronautic applications, O2 detection has been investigated for fuel tank monitoring. However, as noted elsewhere, O2 is not the only species of interest in aerospace applications with a wide range of species of interest being relevant to understand an environmental or vehicle condition. These include combustion products such as CO, HF, HCN, and HCl, which are related to both the presence of a fire and monitoring of post-fire clean-up operations. This paper discusses the development of an electrochemical cell platform based on a polymer electrolyte, NAFION, and a three-electrode configuration. The approach has been to mature this basic platform for a range of applications and to test this system, combined with "Lick and Stick" electronics, for its viability to monitor an environment related to astronaut crew health and safety applications with an understanding that a broad range of applications can be addressed with a core technology.

  7. 21 CFR 314.65 - Withdrawal by the applicant of an unapproved application.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... SERVICES (CONTINUED) DRUGS FOR HUMAN USE APPLICATIONS FOR FDA APPROVAL TO MARKET A NEW DRUG Applications... application and will provide a copy to the applicant on request under the fee schedule in § 20.45 of...

  8. Terahertz applications: trends and challenges

    NASA Astrophysics Data System (ADS)

    Robin, Thierry; Bouye, Clementine; Cochard, Jacques

    2014-03-01

    The objective of our work [1] was to determine the opportunities and challenges for Terahertz application development for the next years with a focus on systems: for homeland security and for Non Destructive Testing (NDT). Terahertz radiation has unique abilities and has been the subject of extensive research for many years. Proven concepts have emerged for numerous applications including Industrial NDT, Security, Health, Telecommunications, etc. Nevertheless, there has been no widely deployed application and Businesses based on THz technologies are still in their infancy. Some technological, market and industrial barriers are still to be broken. We summarize the final analysis and data: study of the technology trends and major bottlenecks per application segment, main challenges to be addressed in the next years, key opportunities for THz technologies based on market needs and requirements.

  9. Three new applicators for hyperthermia.

    PubMed

    Gabriele, P; Orecchia, R; Tseroni, V; Melano, A; Fillini, C; Ragona, R; Bolla, L; Ogno, G

    1989-01-01

    A computerized system with automatic treatment parameters control for radiological hyperthermia, called Sapic SV03, is presented. The system has been planned and built by the "Sezione Avionica ed Equipaggiamenti" of the Aeritalia in cooperation with the Radiotherapy Department of the University of Turin. The device is supplied with a multifrequency generator system (915, 433, 2-30 MHz) connected with many kinds of applicators, with a fiber optic system for temperature control and a previsional thermometry system. In this paper the authors presented three new applicators. The first one is a concave parallel microstrip applicator at 433 MHz, with a size 16 x 9 cm; the heating pattern is homogenous until 4 cm of depth. This antenna can be used for the treatment of chest wall recurrences of breast cancer. The second is a 27 MHz inductive ring and the third applicator is a pyramidal antenna ("TEM line") that operates at a frequency around 27 MHz.

  10. MICROWAVE TECHNOLOGY CHEMICAL SYNTHESIS APPLICATIONS

    EPA Science Inventory

    Microwave-accelerated chemical syntheses in various solvents as well as under solvent-free conditions have witnessed an explosive growth. The technique has found widespread application predominantly exploiting the inexpensive unmodified household microwave (MW) ovens although th...

  11. Medical Applications of Laser Spectroscopy

    NASA Astrophysics Data System (ADS)

    Svanberg, S.

    1989-01-01

    Lasers are finding many applications in medicine and biology. While most laser use focuses on the heat generation of the laser beam interacting with tissue, spectroscopic aspects play a more dominating part in a number of emerging applications. Tumour-seeking agents, such as hematoporphyrin derivative (HPD), in combination with laser radiation provide new possibilities for cancer tumour detection and treatment. The fluorescence emission from tissue irradiated with UV light can be used for tumour localization. Natural tissue fluorescence as well as fluorescence due to injected HPD can be utilized. Results from studies on animals and from clinical applications are reported. The use of fluorescence for identifying atherosclerotic plaque in human vessels is illustrated. Spectroscopic analysis of the laser-induced plasma obtained when a high-power, pulsed laser beam interacts with tissue is also discussed with applications to plaque removal and laser fragmentation of kidney- and gall-stones.

  12. Pesticide formulations and application systems

    SciTech Connect

    Kaneko; Spicer

    1985-01-01

    This book discusses pesticide formulations; spraying techniques and/or low and ultra low volume applications employing oil carriers, including subsurface drip irrigation and plant growth regulators; and granule technology.

  13. CORRECTIVE ACTIONS- TECHNOLOGIES AND APPLICATIONS

    EPA Science Inventory

    This publication provides information presented at a seminar series designed to address selection and application of technologies suitable for controlling and treating releases of hazardous wastes or their constituents from RCRA treatment, storage and disposal facilities. ngineer...

  14. Trends in Mobile Application Development

    NASA Astrophysics Data System (ADS)

    Holzer, Adrian; Ondrus, Jan

    Major software companies, such as Apple and Google, are disturbing the relatively safe and established actors of the mobile application business. These newcomers have caused significant structural changes by imposing and enforcing their own rules for the future of mobile application development. The implications of these changes do not only concern the mobile network operators and mobile phone manufacturers. This changed environment also brings additional opportunities and constraints for current mobile application developers. Therefore, developers need to assess what their options are and how they can take advantages of these current trends. In this paper, we take a developer’s perspective in order to explore how the structural changes will influence the mobile application development markets. Moreover, we discuss what aspects developers need to take into account in order to position themselves within the current trends.

  15. Nanosized microporous crystals: emerging applications.

    PubMed

    Mintova, Svetlana; Jaber, Maguy; Valtchev, Valentin

    2015-10-21

    This review highlights recent developments in the synthesis and unconventional applications of nanosized microporous crystals including framework (zeolites) and layered (clays) type materials. Owing to their microporous nature nanosized zeolites and clays exhibit novel properties, different from those of bulk materials. The factors controlling the formation of nanosized microporous crystals are first revised. The most promising approaches from the viewpoint of large-scale production of nanosized zeolites and clays are discussed in depth. The preparation and advanced applications of nanosized zeolites and clays in free (suspension and powder forms) and fixed (films) forms are summarized. Further the review emphasises the non-conventional applications of new porous materials. A comprehensive analysis of the emerging applications of microporous nanosized crystals in the field of semiconductor industry, optical materials, chemical sensors, medicine, cosmetics, and food industry is presented. Finally, the future needs and perspectives of nanosized microporous materials (zeolites and clays) are addressed.

  16. Accelarators, Colliders and Their Application

    NASA Astrophysics Data System (ADS)

    Wilson, E.

    This document is part of Subvolume C 'Accelerators and Colliders' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the Chapter '1 Accelarators, Colliders and Their Application' with the content:

  17. US Navy lithium cell applications

    NASA Technical Reports Server (NTRS)

    Bowers, F. M.

    1978-01-01

    Applications of lithium systems that are already in the fleet are discussed. The approach that the Navy is taking in the control of the introduction of lithium batteries into the fleet is also discussed.

  18. 78 FR 59422 - Delayed Applications

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-26

    ... Pipeline and Hazardous Materials Safety Administration Delayed Applications AGENCY: Office of Hazardous Materials Safety, Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: List of... Paquet, Director, Office of Hazardous Materials Special Permits and Approvals, Pipeline and...

  19. Commercial Applications Multispectral Sensor System

    NASA Technical Reports Server (NTRS)

    Birk, Ronald J.; Spiering, Bruce

    1993-01-01

    NASA's Office of Commercial Programs is funding a multispectral sensor system to be used in the development of remote sensing applications. The Airborne Terrestrial Applications Sensor (ATLAS) is designed to provide versatility in acquiring spectral and spatial information. The ATLAS system will be a test bed for the development of specifications for airborne and spaceborne remote sensing instrumentation for dedicated applications. This objective requires spectral coverage from the visible through thermal infrared wavelengths, variable spatial resolution from 2-25 meters; high geometric and geo-location accuracy; on-board radiometric calibration; digital recording; and optimized performance for minimized cost, size, and weight. ATLAS is scheduled to be available in 3rd quarter 1992 for acquisition of data for applications such as environmental monitoring, facilities management, geographic information systems data base development, and mineral exploration.

  20. Geant4 Applications in Space

    SciTech Connect

    Asai, M.; /SLAC

    2007-11-07

    Use of Geant4 is rapidly expanding in space application domain. I try to overview three major application areas of Geant4 in space, which are apparatus simulation for pre-launch design and post-launch analysis, planetary scale simulation for radiation spectra and surface and sub-surface explorations, and micro-dosimetry simulation for single event study and radiation-hardening of semiconductor devices. Recently, not only the mission dependent applications but also various multi-purpose or common tools built on top of Geant4 are also widely available. I overview some of such tools as well. The Geant4 Collaboration identifies that the space applications are now one of the major driving forces of the further developments and refinements of Geant4 toolkit. Highlights of such developments are introduced.

  1. Veterinary School Applicants: Financial Literacy and Behaviors.

    PubMed

    Carr, McKensie M; Greenhill, Lisa M

    2015-01-01

    Each year the Association of American Veterinary Medical Colleges (AAVMC) conducts a survey after the close of the Veterinary Medical College Application Service (VMCAS) application. The survey provides a glimpse into applicant behavior surrounding the veterinary school application process. Additional survey questions probe into applicant financial behaviors, use of financial products and services, and pet ownership. This article examines the 2013 survey data from applicants who successfully completed the application, with a focus on applicant financial literacy and behaviors. Data from the study revealed a disconnect between applicants' perception of their ability to deal with day-to-day finances and their actual financial behaviors, particularly for first-generation college student applicants and applicants who are racially/ethnically underrepresented in veterinary medicine (URVM). Many applicants were not able to accurately report the average veterinary school graduate's student debt level, which suggests the potential need for better education about the costs associated with attending veterinary school.

  2. 7 CFR 1709.106 - Eligible applicants.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... applicants. (a) Eligible applicants for grants to fund projects serving eligible extremely high energy cost... not limited to corporations, associations, partnerships, limited liability partnerships (LLPs... eligible applicants under this program, however the proposed grant project must provide community...

  3. 30 CFR 7.23 - Application requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Brattice Cloth and Ventilation Tubing § 7.23 Application requirements. (a) Brattice cloth. A single application may address two or...

  4. 30 CFR 7.23 - Application requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Brattice Cloth and Ventilation Tubing § 7.23 Application requirements. (a) Brattice cloth. A single application may address two or...

  5. 30 CFR 7.23 - Application requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Brattice Cloth and Ventilation Tubing § 7.23 Application requirements. (a) Brattice cloth. A single application may address two or...

  6. 30 CFR 7.23 - Application requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Brattice Cloth and Ventilation Tubing § 7.23 Application requirements. (a) Brattice cloth. A single application may address two or...

  7. 30 CFR 7.23 - Application requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Brattice Cloth and Ventilation Tubing § 7.23 Application requirements. (a) Brattice cloth. A single application may address two or...

  8. 75 FR 23759 - Pesticide Products; Registration Applications

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-04

    ... AGENCY Pesticide Products; Registration Applications AGENCY: Environmental Protection Agency (EPA... Hill, Registration Division (7504P), Office of Pesticide Programs, Environmental Protection Agency... deadline identified. II. Registration Applications EPA has received applications to register...

  9. 75 FR 19388 - Pesticide Product; Registration Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-14

    ... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY Pesticide Product; Registration Application AGENCY: Environmental Protection Agency (EPA). ACTION... deadline identified. II. Registration Applications EPA has received an application to register a...

  10. 47 CFR 3.23 - Legal applicant.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... AUTHORITIES IN MARITIME AND MARITIME MOBILE-SATELLITE RADIO SERVICES Application Procedures § 3.23 Legal applicant. The application shall be signed by the individual, partner or primary officer of a...

  11. 47 CFR 3.23 - Legal applicant.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... AUTHORITIES IN MARITIME AND MARITIME MOBILE-SATELLITE RADIO SERVICES Application Procedures § 3.23 Legal applicant. The application shall be signed by the individual, partner or primary officer of a...

  12. 7 CFR 1794.10 - Applicant responsibilities.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGRICULTURE (CONTINUED) ENVIRONMENTAL POLICIES AND PROCEDURES Implementation of the National Environmental Policy Act § 1794.10 Applicant responsibilities. As described in subpart C of this part, applicants shall prepare the applicable environmental documentation concurrent with a proposed action's...

  13. 47 CFR 1.1309 - Application amendments.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... National Environmental Policy Act of 1969 § 1.1309 Application amendments. Applicants are permitted to amend their applications to reduce, minimize or eliminate potential environmental problems. As a...

  14. Ultraviolet Communication for Medical Applications

    DTIC Science & Technology

    2015-06-01

    AWARD NUMBER: W81XWH-12-C-0043 TITLE: Ultraviolet Communication for Medical Applications PRINCIPAL INVESTIGATOR Jeff Guy Directed Energy , Inc...SUPPLEMENTARY NOTES Report contains color. 14. ABSTRACT Under this Phase II SBIR effort, Directed Energy Inc.’s (DEI) proprietary ultraviolet (UV...non-line-of-sight (NLOS) optical communication data links operating in the solar blind region (200–280 nm). The intended application is covert

  15. Plant genetics for forensic applications.

    PubMed

    Zaya, David N; Ashley, Mary V

    2012-01-01

    An emerging application for plant DNA fingerprinting and barcoding involves forensic investigations. Examples of DNA analysis of botanical evidence include crime scene analysis, identifying the source of commercial plant products, and investigation of trade in illicit drugs. Here, we review real and potential applications of DNA-based forensic botany and provide a protocol for microsatellite genotyping of leaf material, a protocol that could be used to link a suspect to a victim or to a crime scene.

  16. Smartphone Applications for Mental Health.

    PubMed

    Radovic, Ana; Vona, Pamela L; Santostefano, Antonella M; Ciaravino, Samantha; Miller, Elizabeth; Stein, Bradley D

    2016-07-01

    Many adolescents and adults do not seek treatment for mental health symptoms. Smartphone applications (apps) may assist individuals with mental health concerns in alleviating symptoms or increasing understanding. This study seeks to characterize apps readily available to smartphone users seeking mental health information and/or support. Ten key terms were searched in the Apple iTunes and Google Play stores: mental health, depression, anxiety, schizophrenia, bipolar, trauma, trauma in schools, post traumatic stress disorder (PTSD), child trauma, and bullying. A content analysis of the first 20 application descriptions retrieved per category was conducted. Out of 300 nonduplicate applications, 208 (70%) were relevant to search topic, mental health or stress. The most common purported purpose for the apps was symptom relief (41%; n = 85) and general mental health education (18%; n = 37). The most frequently mentioned approaches to improving mental health were those that may benefit only milder symptoms such as relaxation (21%; n = 43). Most app descriptions did not include information to substantiate stated effectiveness of the application (59%; n = 123) and had no mention of privacy or security (89%; n = 185). Due to uncertainty of the helpfulness of readily available mental health applications, clinicians working with mental health patients should inquire about and provide guidance on application use, and patients should have access to ways to assess the potential utility of these applications. Strategic policy and research developments are likely needed to equip patients with applications for mental health, which are patient centered and evidence based.

  17. Military Applications of Augmented Reality

    DTIC Science & Technology

    2011-01-01

    system become challenging, but critical, tasks. Early designs in our human-centered research process attempted to show multiple layers of geometric and...sensory integration can both limit the types of abstractions that make sense for a given application and push the application designer to create new...Livingston et al. to a deployment may wear a system like the Land Warrior system [Army(2001)] containing a wearable computer and head-mounted display designed

  18. Evolvable Hardware for Space Applications

    NASA Technical Reports Server (NTRS)

    Lohn, Jason; Globus, Al; Hornby, Gregory; Larchev, Gregory; Kraus, William

    2004-01-01

    This article surveys the research of the Evolvable Systems Group at NASA Ames Research Center. Over the past few years, our group has developed the ability to use evolutionary algorithms in a variety of NASA applications ranging from spacecraft antenna design, fault tolerance for programmable logic chips, atomic force field parameter fitting, analog circuit design, and earth observing satellite scheduling. In some of these applications, evolutionary algorithms match or improve on human performance.

  19. Multiplier operator algebras and applications

    PubMed Central

    Blecher, David P.; Zarikian, Vrej

    2004-01-01

    The one-sided multipliers of an operator space X are a key to “latent operator algebraic structure” in X. We begin with a survey of these multipliers, together with several of the applications that they have had to operator algebras. We then describe several new results on one-sided multipliers, and new applications, mostly to one-sided M-ideals. PMID:14711990

  20. Applications of algebraic grid generation

    NASA Technical Reports Server (NTRS)

    Eiseman, Peter R.; Smith, Robert E.

    1990-01-01

    Techniques and applications of algebraic grid generation are described. The techniques are univariate interpolations and transfinite assemblies of univariate interpolations. Because algebraic grid generation is computationally efficient, the use of interactive graphics in conjunction with the techniques is advocated. A flexible approach, which works extremely well in an interactive environment, called the control point form of algebraic grid generation is described. The applications discussed are three-dimensional grids constructed about airplane and submarine configurations.

  1. Atmospheric Models for Engineering Applications

    NASA Technical Reports Server (NTRS)

    Johnson, Dale L.; Roberts, Barry C.; Vaughan, William W.; Justus, C. G.

    2002-01-01

    This paper will review the historical development of reference and standard atmosphere models and their applications. The evolution of the U.S. Standard Atmosphere will be addressed, along with the Range Reference Atmospheres and, in particular, the NASA Global Reference Atmospheric Model (GRAM). The extensive scope and content of the GRAM will be addressed since it represents the most extensive and complete 'Reference' atmosphere model in use today. Its origin was for engineering applications and that remains today as its principal use.

  2. Mission applications of electric propulsion

    NASA Technical Reports Server (NTRS)

    Atkins, K. L.

    1974-01-01

    This paper reviews the mission applications of electric propulsion. The energy requirements of candidate high-energy missions gaining in NASA priority are used to highlight the potential of electric propulsion. Mission-propulsion interfaces are examined to point out differences between chemical and electric applications. Brief comparisons between ballistic requirements and capabilities and those of electric propulsion show that electric propulsion is presently the most practical and perhaps the only technology which can accomplish missions with these energy requirements.

  3. Elastomeric Materials for Acoustical Applications

    DTIC Science & Technology

    1989-09-15

    crosslinked polymer that has often been compounded to optimize a certain characteristic, such as aging resistance or water-permeability resistance...applications include hoses, body mounts and pads, O-rings, wire and cable covers, weather stripping, and other areas requiring excellent weather...Chemical Div. of Uniroyal, Inc. It is a relatively fast curing stock used for high-quality molded mechanical goods and wire and cable applications

  4. Physics With Health Science Applications

    NASA Astrophysics Data System (ADS)

    Urone, Paul Peter

    1985-09-01

    An accessible, algebra-based text covering the introductory physics necessary for applied health and nursing. Presentation integrates health science applications throughout. Excellent illustrations support the exposition. Chapters contain over 100 worked examples, over 450 review questions, and more than 550 end-of-chapter problems graded according to difficulty. Offers discussion of the latest applications such as ionizing radiation and radiation doses, nuclear imaging techniques, CT scanners, ultrasound techniques, artificial hearts, and laser surgery.

  5. ICAM Robotics Application Guide (RAG)

    DTIC Science & Technology

    1980-04-01

    ROBOTICS APPLICATION MB GENERAL DYNAMICS CORPORATION FORT WORTH DIVISION FORT WORTH, TEXAS 76101 APRIL 1980 TECHNICAL REPORT AFWAL-TR-80-4042...DOCUMENTATION PAGE AyvJAijfTR-so-AOA^vnntnuFri ’ AT)(-ß05O CTXZ/, l. GOVT ACCESSION NO Ull’i ICAM Robotics Application Guide (RAG) m . vlJ L...Effector Flexible Automation Industrial Robot Manipulator Robotics Work Volume 20. ABSTRACT (Continue on reverse erde II necessary end

  6. Thermoforming - Its Processes and Applications,

    DTIC Science & Technology

    1960-09-01

    Thermoforming was one of the earliest methods of fabricating thermoplastic materials. With the advent of injection molding, most people felt... thermoforming offered little, if any, future or growth potential. Thermoforming was generally regarded as a relatively inexpensive way of making a small...thermoplastic fabrication field. The applications in which thermoforming of plastic sheet is used are many and varied Some of the applications are

  7. An Analysis of Application Generators.

    DTIC Science & Technology

    1983-03-01

    include software modules for very specialized applications, such as financial modelling or statistical analysis packages. In summary application...retrieving and processing data records. The Report Preparation System of RAMIS is designed in the form of an English-like language and lets the user retrieve...sort, calculate, and format data into tabular or graphic reports . In RAMIS the report generator and the graphics language were designed to have a

  8. Project Integration Architecture: Application Architecture

    NASA Technical Reports Server (NTRS)

    Jones, William Henry

    2005-01-01

    The Project Integration Architecture (PIA) implements a flexible, object-oriented, wrapping architecture which encapsulates all of the information associated with engineering applications. The architecture allows the progress of a project to be tracked and documented in its entirety. Additionally, by bringing all of the information sources and sinks of a project into a single architectural space, the ability to transport information between those applications is enabled.

  9. Mobile applications and Virtual Observatory

    NASA Astrophysics Data System (ADS)

    Schaaff, A.; Jagade, S.

    2015-06-01

    Within a few years, smartphones and Internet tablets have become the devices to access Web or standalone applications from everywhere, with a rapid development of the bandwidth of the mobile networks (e.g. 4G). Internet tablets are used to take notes during meetings or conferences, to read scientific papers in public transportation, etc. A smartphone is for example a way to have your data in the pocket or to control, from everywhere, the progress of a heavy workflow process. These mobile devices have enough powerful hardware to run more and more complex applications for many use cases. In the field of astronomy it is possible to use these tools to access data via a simple browser, but also to develop native applications reusing libraries (written in Java for Android or Objective-C/Swift for iOS) developed for desktops/laptops. We describe the experiments conducted in this domain, at CDS and IUCAA, considering a mobile application as a native application as well as a Web application.

  10. Aquarius iPhone Application

    NASA Technical Reports Server (NTRS)

    Estes, Joseph C., Jr.; Arca. Jeremy M.; Ko, Michael A.; Oks, Boris

    2012-01-01

    The Office of the CIO at JPL has developed an iPhone application for the Aquarius/SAC-D mission. The application includes specific information about the science and purpose of the Aquarius satellite and also features daily mission news updates pulled from sources at Goddard Space Flight Center as well as Twitter. The application includes a media and data tab section. The media section displays images from the observatory, viewing construction up to the launch and also includes various videos and recorded diaries from the Aquarius Project Manager. The data tab highlights many of the factors that affect the Earth s ocean and the water cycle. The application leverages the iPhone s accelerometer to move the Aquarius Satellite over the Earth, revealing these factors. Lastly, this application features a countdown timer to the satellite s launch, which is currently counting the days since launch. This application was highly successful in promoting the Aquarius Mission and educating the public about how ocean salinity is paramount to understanding the Earth.

  11. Industrial applications of immobilized cells

    SciTech Connect

    Linko, P.; Linko, Y.Y.

    1984-01-01

    Although the application of the natural attraction of many microorganisms to surfaces has been applied in vinegar production since the early 1980s, and has long been utilized in waste water purification, the development of microbial cell immobilization techniques for special applications dates back only to the early 1960s. The immobilization may involve whole cells, cell fragments, or lysed cells. Whole cells may retain their metabolic activity with their complex multienzyme systems and cofactor regeneration mechanisms intact, or they may be killed in the process with only a few desired enzymes remaining active in the final biocatalyst. Cells may also be coimmobilized with an enzyme to carry out special reactions. Although relatively few industrial scale applications exist today, some are of very large scale. Current applications vary from relatively small scale steroid conversions to amino acid production and high fructose syrup manufacture. A vast number of potential applications are already known, and one of the most interesting applications may be in continuous fermentation such as ethanol production by immobilized living microorganisms. 373 references.

  12. Molecular imprinting: perspectives and applications.

    PubMed

    Chen, Lingxin; Wang, Xiaoyan; Lu, Wenhui; Wu, Xiaqing; Li, Jinhua

    2016-04-21

    Molecular imprinting technology (MIT), often described as a method of making a molecular lock to match a molecular key, is a technique for the creation of molecularly imprinted polymers (MIPs) with tailor-made binding sites complementary to the template molecules in shape, size and functional groups. Owing to their unique features of structure predictability, recognition specificity and application universality, MIPs have found a wide range of applications in various fields. Herein, we propose to comprehensively review the recent advances in molecular imprinting including versatile perspectives and applications, concerning novel preparation technologies and strategies of MIT, and highlight the applications of MIPs. The fundamentals of MIPs involving essential elements, preparation procedures and characterization methods are briefly outlined. Smart MIT for MIPs is especially highlighted including ingenious MIT (surface imprinting, nanoimprinting, etc.), special strategies of MIT (dummy imprinting, segment imprinting, etc.) and stimuli-responsive MIT (single/dual/multi-responsive technology). By virtue of smart MIT, new formatted MIPs gain popularity for versatile applications, including sample pretreatment/chromatographic separation (solid phase extraction, monolithic column chromatography, etc.) and chemical/biological sensing (electrochemical sensing, fluorescence sensing, etc.). Finally, we propose the remaining challenges and future perspectives to accelerate the development of MIT, and to utilize it for further developing versatile MIPs with a wide range of applications (650 references).

  13. XAL Application Framework and Bricks GUI Builder

    SciTech Connect

    Pelaia II, Tom

    2007-01-01

    The XAL [1] Application Framework is a framework for rapidly developing document based Java applications with a common look and feel along with many built-in user interface behaviors. The Bricks GUI builder consists of a modern application and framework for rapidly building user interfaces in support of true Model-View-Controller (MVC) compliant Java applications. Bricks and the XAL Application Framework allow developers to rapidly create quality applications.

  14. 77 FR 25733 - Receipt of Applications for Endangered Species Permits

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-01

    ... to do so. Permit Application Number: TE-66439A Applicant: Atlanta Botanical Garden, Atlanta, Georgia..., Columbus, Georgia. Permit Application Number: TE-237537 Applicant: Missouri Botanical Garden, St. Louis... Number: TE-148282 Applicant: Jack Wilhide, Chapmanville, West Virginia Applicant requests...

  15. 77 FR 57107 - Receipt of Applications for Endangered Species Permits

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-17

    ...: TE-79580A Applicant: Jason Butler, Lexington, Kentucky Applicant requests authorization to conduct... in Kentucky. Permit Application Number: TE-130300 Applicant: Paul Johnson, Alabama Aquatic.... Permit Application Number: TE-80377A Applicant: Michael Zavislak, Columbia, South Carolina...

  16. Applications of Tethers in Space, Volume 2

    NASA Technical Reports Server (NTRS)

    Cron, A. C. (Compiler)

    1985-01-01

    Topics discussed include tethered satellites, tether deployment, satellite systems, science applications, electrodynamic interactions, transportation applications, artificial gravity, constellations, and technology and testing.

  17. 33 CFR 236.2 - Applicability.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... WATER RESOURCE POLICIES AND AUTHORITIES: CORPS OF ENGINEERS PARTICIPATION IN IMPROVEMENTS FOR ENVIRONMENTAL QUALITY § 236.2 Applicability. This regulation is applicable to all OCE elements and...

  18. 42 CFR 422.501 - Application requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... (CONTINUED) MEDICARE PROGRAM MEDICARE ADVANTAGE PROGRAM Application Procedures and Contracts for Medicare Advantage Organizations § 422.501 Application requirements. (a) Scope. This section sets forth...

  19. 42 CFR 422.501 - Application requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... (CONTINUED) MEDICARE PROGRAM MEDICARE ADVANTAGE PROGRAM Application Procedures and Contracts for Medicare Advantage Organizations § 422.501 Application requirements. (a) Scope. This section sets forth...

  20. Fact sheet for Applicants Intergovernmental Review Process

    EPA Pesticide Factsheets

    When submitting your application for Federal assistance, please observe the following steps pertaining to the intergovernmental review process. This is the Fact sheet for Applicants Intergovernmental Review Process.

  1. 42 CFR 124.4 - Application.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... health care services, home health care, and design and construction economies, or through increased.... (2) The application has been reviewed in accordance with the applicable requirements of OMB...

  2. 42 CFR 124.4 - Application.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... health care services, home health care, and design and construction economies, or through increased.... (2) The application has been reviewed in accordance with the applicable requirements of OMB...

  3. 42 CFR 124.4 - Application.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... health care services, home health care, and design and construction economies, or through increased.... (2) The application has been reviewed in accordance with the applicable requirements of OMB...

  4. 42 CFR 124.4 - Application.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... health care services, home health care, and design and construction economies, or through increased.... (2) The application has been reviewed in accordance with the applicable requirements of OMB...

  5. Applications for cyber security - System and application monitoring

    SciTech Connect

    Marron, J. E.

    2006-07-01

    Standard network security measures are adequate for defense against external attacks. However, many experts agree that the greater threat is from internal sources. Insiders with malicious intentions can change controller instructions, change alarm thresholds, and issue commands to equipment which can damage equipment and compromise control system integrity. In addition to strict physical security the state of the system must be continually monitored. System and application monitoring goes beyond the capabilities of network security appliances. It will include active processes, operating system services, files, network adapters and IP addresses. The generation of alarms is a crucial feature of system and application monitoring. The alarms should be integrated to avoid the burden on operators of checking multiple locations for security violations. Tools for system and application monitoring include commercial software, free software, and ad-hoc tools that can be easily created. System and application monitoring is part of a 'defense-in-depth' approach to a control network security plan. Layered security measures prevent an individual security measure failure from being exploited into a successful security breach. Alarming of individual failures is essential for rapid isolation and correction of single failures. System and application monitoring is the innermost layer of this defense strategy. (authors)

  6. Project Assessment Skills Web Application

    NASA Technical Reports Server (NTRS)

    Goff, Samuel J.

    2013-01-01

    The purpose of this project is to utilize Ruby on Rails to create a web application that will replace a spreadsheet keeping track of training courses and tasks. The goal is to create a fast and easy to use web application that will allow users to track progress on training courses. This application will allow users to update and keep track of all of the training required of them. The training courses will be organized by group and by user, making readability easier. This will also allow group leads and administrators to get a sense of how everyone is progressing in training. Currently, updating and finding information from this spreadsheet is a long and tedious task. By upgrading to a web application, finding and updating information will be easier than ever as well as adding new training courses and tasks. Accessing this data will be much easier in that users just have to go to a website and log in with NDC credentials rather than request the relevant spreadsheet from the holder. In addition to Ruby on Rails, I will be using JavaScript, CSS, and jQuery to help add functionality and ease of use to my web application. This web application will include a number of features that will help update and track progress on training. For example, one feature will be to track progress of a whole group of users to be able to see how the group as a whole is progressing. Another feature will be to assign tasks to either a user or a group of users. All of these together will create a user friendly and functional web application.

  7. Nanostructured bioceramics for maxillofacial applications.

    PubMed

    Adamopoulos, Othon; Papadopoulos, Triantafillos

    2007-08-01

    Biomaterials science and technology have been expanding tremendously the recent years. The results of this evolution are obvious in maxillofacial applications especially with the contemporary development of Nanotechnology. Among biomaterials, bioceramics possess a specific field due to various interactions with the biological tissues. The combination of bioceramics and nanotechnology has resulted in enhanced skeletal interactions in maxillofacial applications. Nanotechnology secures better mechanical properties and more effective biological interactions with jaws. The main production methods for the synthesis of nanostructured materials include plasma arcing, chemical vapour deposition, sol-gel and precipitation. The bioceramics in Dentistry comprise inert, bioactive, resorbable and composite systems. The purpose of the present article is to describe the available nanotechnology methods and how these could be addressed to synthesise maxillofacial bioceramics with advanced properties for better biological applications. Additionally, it describes specific clinical applications in maxillofacial surgery of these biomaterials--either by themselves or in combination with others--that can be promising candidates for bone tissue engineering. Such applications include replacement of lost teeth, filling of jaws defects or reconstruction of mandible and temporomandibular joint.

  8. Potential medical applications of TAE

    NASA Technical Reports Server (NTRS)

    Fahy, J. Ben; Kaucic, Robert; Kim, Yongmin

    1986-01-01

    In cooperation with scientists in the University of Washington Medical School, a microcomputer-based image processing system for quantitative microscopy, called DMD1 (Digital Microdensitometer 1) was constructed. In order to make DMD1 transportable to different hosts and image processors, we have been investigating the possibility of rewriting the lower level portions of DMD1 software using Transportable Applications Executive (TAE) libraries and subsystems. If successful, we hope to produce a newer version of DMD1, called DMD2, running on an IBM PC/AT under the SCO XENIX System 5 operating system, using any of seven target image processors available in our laboratory. Following this implementation, copies of the system will be transferred to other laboratories with biomedical imaging applications. By integrating those applications into DMD2, we hope to eventually expand our system into a low-cost general purpose biomedical imaging workstation. This workstation will be useful not only as a self-contained instrument for clinical or research applications, but also as part of a large scale Digital Imaging Network and Picture Archiving and Communication System, (DIN/PACS). Widespread application of these TAE-based image processing and analysis systems should facilitate software exchange and scientific cooperation not only within the medical community, but between the medical and remote sensing communities as well.

  9. ZERODUR TAILORED for cryogenic application

    NASA Astrophysics Data System (ADS)

    Jedamzik, R.; Westerhoff, T.

    2014-07-01

    ZERODUR® glass ceramic from SCHOTT is known for its very low thermal expansion coefficient (CTE) at room temperature and its excellent CTE homogeneity. It is widely used for ground-based astronomical mirrors but also for satellite applications. Many reference application demonstrate the excellent and long lasting performance of ZERODUR® components in orbit. For space application a low CTE of the mirror material is required at cryogenic temperatures together with a good match of the thermal expansion to the supporting structure material. It is possible to optimize the coefficient of thermal expansion of ZERODUR® for cryogenic applications. This paper reports on measurements of thermal expansion of ZERODUR® down to cryogenic temperatures of 10 K performed by the PTB (Physikalisch Technische Bundesanstallt, Braunschweig, Germany, the national metrology laboratory). The ZERODUR® TAILORED CRYO presented in this paper has a very low coefficient of thermal expansion down to 70 K. The maximum absolute integrated thermal expansion down to 10 K is only about 20 ppm. Mirror blanks made from ZERODUR® TAILORED CRYO can be light weighted to almost 90% with our modern processing technologies. With ZERODUR® TAILORED CRYO, SCHOTT offers the mirror blank material for the next generation of space telescope applications.

  10. Mass Spectrometry Applications for Toxicology

    PubMed Central

    Mbughuni, Michael M.; Jannetto, Paul J.

    2016-01-01

    Toxicology is a multidisciplinary study of poisons, aimed to correlate the quantitative and qualitative relationships between poisons and their physiological and behavioural effects in living systems. Other key aspects of toxicology focus on elucidation of the mechanisms of action of poisons and development of remedies and treatment plans for associated toxic effects. In these endeavours, Mass spectrometry (MS) has become a powerful analytical technique with a wide range of application used in the Toxicological analysis of drugs, poisons, and metabolites of both. To date, MS applications have permeated all fields of toxicology which include; environmental, clinical, and forensic toxicology. While many different analytical applications are used in these fields, MS and its hyphenated applications such as; gas chromatography MS (GC-MS), liquid chromatography MS (LC-MS), inductively coupled plasma ionization MS (ICP-MS), tandem mass spectrometry (MS/MS and MSn) have emerged as powerful tools used in toxicology laboratories. This review will focus on these hyphenated MS technologies and their applications for toxicology. PMID:28149262

  11. Mass Spectrometry Applications for Toxicology.

    PubMed

    Mbughuni, Michael M; Jannetto, Paul J; Langman, Loralie J

    2016-12-01

    Toxicology is a multidisciplinary study of poisons, aimed to correlate the quantitative and qualitative relationships between poisons and their physiological and behavioural effects in living systems. Other key aspects of toxicology focus on elucidation of the mechanisms of action of poisons and development of remedies and treatment plans for associated toxic effects. In these endeavours, Mass spectrometry (MS) has become a powerful analytical technique with a wide range of application used in the Toxicological analysis of drugs, poisons, and metabolites of both. To date, MS applications have permeated all fields of toxicology which include; environmental, clinical, and forensic toxicology. While many different analytical applications are used in these fields, MS and its hyphenated applications such as; gas chromatography MS (GC-MS), liquid chromatography MS (LC-MS), inductively coupled plasma ionization MS (ICP-MS), tandem mass spectrometry (MS/MS and MS(n)) have emerged as powerful tools used in toxicology laboratories. This review will focus on these hyphenated MS technologies and their applications for toxicology.

  12. Superhydrophobic materials for biomedical applications.

    PubMed

    Falde, Eric J; Yohe, Stefan T; Colson, Yolonda L; Grinstaff, Mark W

    2016-10-01

    Superhydrophobic surfaces are actively studied across a wide range of applications and industries, and are now finding increased use in the biomedical arena as substrates to control protein adsorption, cellular interaction, and bacterial growth, as well as platforms for drug delivery devices and for diagnostic tools. The commonality in the design of these materials is to create a stable or metastable air layer at the material surface, which lends itself to a number of unique properties. These activities are catalyzing the development of new materials, applications, and fabrication techniques, as well as collaborations across material science, chemistry, engineering, and medicine given the interdisciplinary nature of this work. The review begins with a discussion of superhydrophobicity, and then explores biomedical applications that are utilizing superhydrophobicity in depth including material selection characteristics, in vitro performance, and in vivo performance. General trends are offered for each application in addition to discussion of conflicting data in the literature, and the review concludes with the authors' future perspectives on the utility of superhydrophobic biomaterials for medical applications.

  13. Photogrammetric techniques for aerospace applications

    NASA Astrophysics Data System (ADS)

    Liu, Tianshu; Burner, Alpheus W.; Jones, Thomas W.; Barrows, Danny A.

    2012-10-01

    Photogrammetric techniques have been used for measuring the important physical quantities in both ground and flight testing including aeroelastic deformation, attitude, position, shape and dynamics of objects such as wind tunnel models, flight vehicles, rotating blades and large space structures. The distinct advantage of photogrammetric measurement is that it is a non-contact, global measurement technique. Although the general principles of photogrammetry are well known particularly in topographic and aerial survey, photogrammetric techniques require special adaptation for aerospace applications. This review provides a comprehensive and systematic summary of photogrammetric techniques for aerospace applications based on diverse sources. It is useful mainly for aerospace engineers who want to use photogrammetric techniques, but it also gives a general introduction for photogrammetrists and computer vision scientists to new applications.

  14. Applications attract DuPont

    SciTech Connect

    Rotman, D.

    1996-08-07

    Scientists at DuPont say they have demonstrated the first chemical processing application for high-temperature superconducting (HTS) magnets. DuPont says the work, which uses a HTS magnet to separate mineral contaminants from kaolin, points to the feasibility of a range of HTS applications in industrial processing, including those involving polymerization. DuPont`s success comes after 10 years of work to commercialize high-temperature superconductors. And while superconductors have lost much of their luster since the late 1980s, the company says it is still bullish on their prospects. {open_quotes}At the moment, there`s no real market for superconductors,{close_quotes} says Alan Lauder, general manager/superconductivity. But, he says, several potentially lucrative applications could be commercialized within the next several years.

  15. Advances in uncooled systems applications

    NASA Astrophysics Data System (ADS)

    Anderson, John S.; Bradley, Daryl; Chen, Chungte W.; Chin, Richard; Gonzalez, H.; Hegg, Ronald G.; Kostrzewa, K.; Le Pere, C.; Ton, S.; Kennedy, Adam; Murphy, Daniel F.; Ray, Michael; Wyles, Richard; Miller, James E.; Newsome, Gwendolyn W.

    2003-09-01

    The Low Cost Microsensors (LCMS) Program recently demonstrated state-of-the-art imagery in a long-range infrared (IR) sensor built upon an uncooled vanadium oxide (VOx) 640 x 480 format focal plane array (FPA) engine. The 640 x 480 sensor is applicable to long-range surveillance and targeting missions. The intent of this DUS&T effort was to further reduce the cost, weight, and power of uncooled IR sensors, and to increase the capability of these sensors, thereby expanding their applicability to military and commercial markets never before addressed by thermal imaging. In addition, the Advanced Uncooled Thermal Imaging Sensors (AUTIS) Program extended this development to light-weight, compact unmanned aerial vehicle (UAV) applications.

  16. Infrared detectors for space applications

    NASA Astrophysics Data System (ADS)

    Fick, Wolfgang; Gassmann, Kai Uwe; Haas, Luis-Dieter; Haiml, Markus; Hanna, Stefan; Hübner, Dominique; Höhnemann, Holger; Nothaft, Hans-Peter; Thöt, Richard

    2013-12-01

    The motivation and intended benefits for the use of infrared (IR) detectors for space applications are highlighted. The actual status of state-of-the-art IR detectors for space applications is presented based on some of AIM's currently ongoing focal plane detector module developments covering the spectral range from the short-wavelength IR (SWIR) to the long-wavelength IR (LWIR) and very long-wavelength IR (VLWIR), where both imaging and spectroscopy applications will be addressed. In particular, the integrated detector cooler assemblies for a mid-wavelength IR (MWIR) push-broom imaging satellite mission, for the German hyperspectral satellite mission EnMAP and the IR detectors for the Sentinel 3 SLSTR will be elaborated. Additionally, dedicated detector modules for LWIR/VLWIR sounding, providing the possibility to have two different PVs driven by one ROIC, will be addressed.

  17. Medical Applications of Synchrotron Radiation

    DOE R&D Accomplishments Database

    Thomlinson, W.

    1991-10-01

    Ever since the first diagnostic x-ray was done in the United States on February 3, 1896, the application of ionizing radiation to the field of medicine has become increasingly important. Both in clinical medicine and basic research the use of x-rays for diagnostic imaging and radiotherapy is now widespread. Radiography, angiography, CAT and PETT scanning, mammography, and nuclear medicine are all examples of technologies developed to image the human anatomy. In therapeutic applications, both external and internal sources of radiation are applied to the battle against cancer. The development of dedicated synchrotron radiation sources has allowed exciting advances to take place in many of these applications. The new sources provide tunable, high-intensity monochromatic beams over a wide range of energies which can be tailored to specific programmatic needs. This paper surveys those areas of medical research in which synchrotron radiation facilities are actively involved.

  18. Energy Storage for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Perez-Davis, Marla E.; Loyselle, Patricia L.; Hoberecht, Mark A.; Manzo, Michelle A.; Kohout, Lisa L.; Burke, Kenneth A.; Cabrera, Carlos R.

    2001-01-01

    The NASA Glenn Research Center (GRC) has long been a major contributor to the development and application of energy storage technologies for NASAs missions and programs. NASA GRC has supported technology efforts for the advancement of batteries and fuel cells. The Electrochemistry Branch at NASA GRC continues to play a critical role in the development and application of energy storage technologies, in collaboration with other NASA centers, government agencies, industry and academia. This paper describes the work in batteries and fuel cell technologies at the NASA Glenn Research Center. It covers a number of systems required to ensure that NASAs needs for a wide variety of systems are met. Some of the topics covered are lithium-based batteries, proton exchange membrane (PEM) fuel cells, and nanotechnology activities. With the advances of the past years, we begin the 21st century with new technical challenges and opportunities as we develop enabling technologies for batteries and fuel cells for aerospace applications.

  19. Development of interactive multimedia applications

    NASA Technical Reports Server (NTRS)

    Leigh, Albert; Wang, Lui

    1993-01-01

    Multimedia is making an increasingly significant contribution to our informational society. The usefulness of this technology is already evident in education, business presentations, informational kiosks (e.g., in museums), training and the entertainment environment. Institutions, from grade schools to medical schools, are exploring the use of multifaceted electronic text books and teaching aids to enhance course materials. Through multimedia, teachers and students can take full advantage of the cognitive value of animation, audio, video and other types in a seamless application. The Software Technology Branch at NASA Johnson Space Center (NASA/JSC) is taking similar approaches to apply the state-of-the-art technology to space training, mission operations and other applications. This paper discusses the characteristics and development of multimedia applications at the NASA/JSC.

  20. Powder metal technologies and applications

    SciTech Connect

    Eisen, W.B.; Ferguson, B.L.; German, R.M.; Iacocca, R.; Lee, P.W.; Madan, D.; Moyer, K.; Sanderow, H.; Trudel, Y.

    1998-12-31

    This volume is: (1) a completely updated and expanded edition in all areas of powder production, sampling, characterization, shaping, consolidation, sintering, quality control, machining, heat treating, and P/M applications; (2) single source for practical engineering information on sintering practices, tool design, P/M metallography, dimensional control, part design, powders, binders, lubricants, and the processing, properties, and performance of P/M materials in different production technologies and applications; (3) comprehensive coverage of P/M technologies and applications including warm compaction, injection molding, rapid prototyping, thermal spray forming, reactive sintering, and P/M gears, bearings, high-performance parts, composites, machine parts, electric contacts, magnetic materials, metallic foams, hardfacing powders, automotive parts, and more.

  1. Photovoltaic tests and applications project

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The activities and accomplishments of the Photovoltaic Tests and Applications Project during the period April 1976 through June 1977 are summarized. Results of efforts to identify potential near-term photovoltaic applications and users are discussed, including the outcome of an extensive survey of Federal government agencies. The status of application experiments is presented. Various general engineering efforts are reported, including the design and construction of a photovoltaic Systems Test Facility. Efforts to develop a high efficiency 10 kVA self-commutated inverter and controller specifically designed for photovoltaic systems are also discussed. The results of a wide variety of activities in the area of photovoltaic measurements and standards are related. Documents generated by the Project during the reporting period are listed in an Appendix.

  2. Nontraditional applications in clinical pathology.

    PubMed

    Jordan, Holly L; Register, Thomas C; Tripathi, Niraj K; Bolliger, Anne Provencher; Everds, Nancy; Zelmanovic, David; Poitout, Florence; Bounous, Denise I; Wescott, Debra; Ramaiah, Shashi K

    2014-10-01

    Most published reviews of preclinical toxicological clinical pathology focus on the fundamental aspects of hematology, clinical chemistry, coagulation, and urinalysis in routine toxicology animal species, for example, rats, mice, dogs, and nonhuman primates. The objective of this continuing education course was to present and discuss contemporary examples of nonroutine applications of clinical pathology endpoints used in the drug development setting. Area experts discussed bone turnover markers of laboratory animal species, clinical pathology of pregnant and growing laboratory animals, clinical pathology of nonroutine laboratory animal species, and unique applications of the Siemens Advia(®) hematology analyzer. This article is a summary based on a presentation given at the 31st Annual Symposium of the Society of Toxicologic Pathology, during the Continuing Education Course titled "Nontraditional Applications of Clinical Pathology in Drug Discovery and Preclinical Toxicology."

  3. Aptamers and Their Biological Applications

    PubMed Central

    Song, Kyung-Mi; Lee, Seonghwan; Ban, Changill

    2012-01-01

    Recently, aptamers have attracted the attention of many scientists, because they not only have all of the advantages of antibodies, but also have unique merits, such as thermal stability, low cost, and unlimited applications. In this review, we present the reasons why aptamers are known as alternatives to antibodies. Furthermore, several types of in vitro selection processes, including nitrocellulose membrane filtration, affinity chromatography, magnetic bead, and capillary electrophoresis-based selection methods, are explained in detail. We also introduce various applications of aptamers for the diagnosis of diseases and detection of small molecules. Numerous analytical techniques, such as electrochemical, colorimetric, optical, and mass-sensitive methods, can be utilized to detect targets, due to convenient modifications and the stability of aptamers. Finally, several medical and analytical applications of aptamers are presented. In summary, aptamers are promising materials for diverse areas, not just as alternatives to antibodies, but as the core components of medical and analytical equipment. PMID:22368488

  4. Advanced Accelerators for Medical Applications

    NASA Astrophysics Data System (ADS)

    Uesaka, Mitsuru; Koyama, Kazuyoshi

    We review advanced accelerators for medical applications with respect to the following key technologies: (i) higher RF electron linear accelerator (hereafter “linac”); (ii) optimization of alignment for the proton linac, cyclotron and synchrotron; (iii) superconducting magnet; (iv) laser technology. Advanced accelerators for medical applications are categorized into two groups. The first group consists of compact medical linacs with high RF, cyclotrons and synchrotrons downsized by optimization of alignment and superconducting magnets. The second group comprises laser-based acceleration systems aimed of medical applications in the future. Laser plasma electron/ion accelerating systems for cancer therapy and laser dielectric accelerating systems for radiation biology are mentioned. Since the second group has important potential for a compact system, the current status of the established energy and intensity and of the required stability are given.

  5. Potential therapeutic applications of biosurfactants.

    PubMed

    Gudiña, Eduardo J; Rangarajan, Vivek; Sen, Ramkrishna; Rodrigues, Lígia R

    2013-12-01

    Biosurfactants have recently emerged as promising molecules for their structural novelty, versatility, and diverse properties that are potentially useful for many therapeutic applications. Mainly due to their surface activity, these molecules interact with cell membranes of several organisms and/or with the surrounding environments, and thus can be viewed as potential cancer therapeutics or as constituents of drug delivery systems. Some types of microbial surfactants, such as lipopeptides and glycolipids, have been shown to selectively inhibit the proliferation of cancer cells and to disrupt cell membranes causing their lysis through apoptosis pathways. Moreover, biosurfactants as drug delivery vehicles offer commercially attractive and scientifically novel applications. This review covers the current state-of-the-art in biosurfactant research for therapeutic purposes, providing new directions towards the discovery and development of molecules with novel structures and diverse functions for advanced applications.

  6. Medical applications of synchrotron radiation

    SciTech Connect

    Thomlinson, W.

    1991-10-01

    Ever since the first diagnostic x-ray was done in the United States on February 3, 1896, the application of ionizing radiation to the field of medicine has become increasingly important. Both in clinical medicine and basic research the use of x-rays for diagnostic imaging and radiotherapy is now widespread. Radiography, angiography, CAT and PETT scanning, mammography, and nuclear medicine are all examples of technologies developed to image the human anatomy. In therapeutic applications, both external and internal sources of radiation are applied to the battle against cancer. The development of dedicated synchrotron radiation sources has allowed exciting advances to take place in many of these applications. The new sources provide tunable, high-intensity monochromatic beams over a wide range of energies which can be tailored to specific programmatic needs. This paper surveys those areas of medical research in which synchrotron radiation facilities are actively involved.

  7. Location Privacy in RFID Applications

    NASA Astrophysics Data System (ADS)

    Sadeghi, Ahmad-Reza; Visconti, Ivan; Wachsmann, Christian

    RFID-enabled systems allow fully automatic wireless identification of objects and are rapidly becoming a pervasive technology with various applications. However, despite their benefits, RFID-based systems also pose challenging risks, in particular concerning user privacy. Indeed, improvident use of RFID can disclose sensitive information about users and their locations allowing detailed user profiles. Hence, it is crucial to identify and to enforce appropriate security and privacy requirements of RFID applications (that are also compliant to legislation). This chapter first discusses security and privacy requirements for RFID-enabled systems, focusing in particular on location privacy issues. Then it explores the advances in RFID applications, stressing the security and privacy shortcomings of existing proposals. Finally, it presents new promising directions for privacy-preserving RFID systems, where as a case study we focus electronic tickets (e-tickets) for public transportation.

  8. 24 CFR 1003.300 - Application requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Application requirements. 1003.300 Section 1003.300 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT... Grant Application and Selection Process § 1003.300 Application requirements. (a) Application...

  9. 14 CFR 47.31 - Application.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Application. 47.31 Section 47.31... REGISTRATION Certificates of Aircraft Registration § 47.31 Application. (a) Each applicant for a Certificate of... one copy (green) of the Aircraft Registration Application, AC Form 8050-1; (2) The original...

  10. 10 CFR 725.11 - Applications.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...; (3) Description of business or occupation of applicant; and (4)(i) If applicant is an individual, state citizenship. (ii) If applicant is a partnership, state name, citizenship and address of each partner and the principal location where the partnership does business. (iii) If applicant is...

  11. 7 CFR 1780.39 - Application processing.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of deductibles may be allowed by RUS providing the applicant has financial resources which would... applicant should arrange through the processing office an application conference to provide a basis for orderly application assembly. The processing office will explain program requirements, public...

  12. 28 CFR 33.41 - Application content.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 28 Judicial Administration 1 2012-07-01 2012-07-01 false Application content. 33.41 Section 33.41 Judicial Administration DEPARTMENT OF JUSTICE BUREAU OF JUSTICE ASSISTANCE GRANT PROGRAMS Criminal Justice Block Grants Application Requirements § 33.41 Application content. (a) Format. Applications from the states for criminal justice block...

  13. 28 CFR 33.41 - Application content.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28 Judicial Administration 1 2013-07-01 2013-07-01 false Application content. 33.41 Section 33.41 Judicial Administration DEPARTMENT OF JUSTICE BUREAU OF JUSTICE ASSISTANCE GRANT PROGRAMS Criminal Justice Block Grants Application Requirements § 33.41 Application content. (a) Format. Applications from the states for criminal justice block...

  14. 28 CFR 33.41 - Application content.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 28 Judicial Administration 1 2014-07-01 2014-07-01 false Application content. 33.41 Section 33.41 Judicial Administration DEPARTMENT OF JUSTICE BUREAU OF JUSTICE ASSISTANCE GRANT PROGRAMS Criminal Justice Block Grants Application Requirements § 33.41 Application content. (a) Format. Applications from the states for criminal justice block...

  15. 47 CFR 3.20 - Application form.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... AUTHORITIES IN MARITIME AND MARITIME MOBILE-SATELLITE RADIO SERVICES Application Procedures § 3.20 Application form. Written application must be made to the Federal Communications Commission on FCC Form 44... 47 Telecommunication 1 2011-10-01 2011-10-01 false Application form. 3.20 Section...

  16. 47 CFR 3.20 - Application form.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... AUTHORITIES IN MARITIME AND MARITIME MOBILE-SATELLITE RADIO SERVICES Application Procedures § 3.20 Application form. Written application must be made to the Federal Communications Commission on FCC Form 44... 47 Telecommunication 1 2010-10-01 2010-10-01 false Application form. 3.20 Section...

  17. 38 CFR 17.254 - Applications.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., assurances, and supporting documents: (a) To specify amount. Each application shall show the amount of the..., and amounts or expenses which will be borne by the applicant, and (e) To include assurance records will be kept. Each application shall include sufficient assurances that the applicant shall...

  18. 50 CFR 253.12 - Credit application.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... or an applicant withdraws its application before the Program issues an AIP letter, as described in § 253.13(e). The Program will not issue an AIP letter if any of the application fee remains unpaid. No portion of the application fee shall be refunded once the Program issues an AIP letter. (c)...

  19. 50 CFR 253.12 - Credit application.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... or an applicant withdraws its application before the Program issues an AIP letter, as described in § 253.13(e). The Program will not issue an AIP letter if any of the application fee remains unpaid. No portion of the application fee shall be refunded once the Program issues an AIP letter. (c)...

  20. 50 CFR 253.12 - Credit application.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... or an applicant withdraws its application before the Program issues an AIP letter, as described in § 253.13(e). The Program will not issue an AIP letter if any of the application fee remains unpaid. No portion of the application fee shall be refunded once the Program issues an AIP letter. (c)...

  1. 10 CFR 76.33 - Application procedures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Application procedures. 76.33 Section 76.33 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.33 Application procedures. (a) Filing requirements. (1) An application for a certificate of compliance must be tendered...

  2. 10 CFR 76.33 - Application procedures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Application procedures. 76.33 Section 76.33 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.33 Application procedures. (a) Filing requirements. (1) An application for a certificate of compliance must be tendered...

  3. 10 CFR 76.33 - Application procedures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Application procedures. 76.33 Section 76.33 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.33 Application procedures. (a) Filing requirements. (1) An application for a certificate of compliance must be tendered...

  4. 10 CFR 76.33 - Application procedures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Application procedures. 76.33 Section 76.33 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.33 Application procedures. (a) Filing requirements. (1) An application for a certificate of compliance must be tendered...

  5. 10 CFR 76.33 - Application procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Application procedures. 76.33 Section 76.33 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.33 Application procedures. (a) Filing requirements. (1) An application for a certificate of compliance must be tendered...

  6. 28 CFR 33.41 - Application content.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... grants. (b) Programs. Applications must set forth programs and projects covering a two-year period which.... Applications must be amended annually, if new programs or projects are to be added or if the programs or projects contained in the approved application are not implemented. The application must designate...

  7. 7 CFR 1944.531 - Applications submission.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., the State Office will forward to the applicant a signed Form AD-622 and provide SF 424.1 with instructions to the applicant for preparation of an application. (b) Upon receipt of Form AD-622, the applicant...) Form SF 424.1 and the information submitted in accordance with § 1944.526(a)(2). (2) Form AD-622....

  8. 49 CFR 22.41 - Application procedures.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Application procedures. 22.41 Section 22.41 Transportation Office of the Secretary of Transportation SHORT-TERM LENDING PROGRAM (STLP) Loan Application Process § 22.41 Application procedures. (a) A STLP loan guarantee request application package...

  9. 49 CFR 22.41 - Application procedures.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 1 2012-10-01 2012-10-01 false Application procedures. 22.41 Section 22.41 Transportation Office of the Secretary of Transportation SHORT-TERM LENDING PROGRAM (STLP) Loan Application Process § 22.41 Application procedures. (a) A STLP loan guarantee request application package...

  10. 49 CFR 22.41 - Application procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Application procedures. 22.41 Section 22.41 Transportation Office of the Secretary of Transportation SHORT-TERM LENDING PROGRAM (STLP) Loan Application Process § 22.41 Application procedures. (a) A STLP loan guarantee request application package...

  11. 49 CFR 22.41 - Application procedures.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 1 2014-10-01 2014-10-01 false Application procedures. 22.41 Section 22.41 Transportation Office of the Secretary of Transportation SHORT-TERM LENDING PROGRAM (STLP) Loan Application Process § 22.41 Application procedures. (a) A STLP loan guarantee request application package...

  12. 49 CFR 22.41 - Application procedures.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Application procedures. 22.41 Section 22.41 Transportation Office of the Secretary of Transportation SHORT-TERM LENDING PROGRAM (STLP) Loan Application Process § 22.41 Application procedures. (a) A STLP loan guarantee request application package...

  13. 45 CFR 149.40 - Application.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... application the applicant must submit the following: (1) Applicant's Tax Identification Number. (2) Applicant...) An attestation that policies and procedures are in place to detect and reduce fraud, waste, and abuse... determination shows on its face that an error was made; or (3) At any time in instances of fraud or...

  14. 45 CFR 2400.10 - Application.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Application. 2400.10 Section 2400.10 Public Welfare Regulations Relating to Public Welfare (Continued) JAMES MADISON MEMORIAL FELLOWSHIP FOUNDATION FELLOWSHIP PROGRAM REQUIREMENTS Application § 2400.10 Application. Eligible applicants for fellowships...

  15. 45 CFR 2400.10 - Application.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 4 2011-10-01 2011-10-01 false Application. 2400.10 Section 2400.10 Public Welfare Regulations Relating to Public Welfare (Continued) JAMES MADISON MEMORIAL FELLOWSHIP FOUNDATION FELLOWSHIP PROGRAM REQUIREMENTS Application § 2400.10 Application. Eligible applicants for fellowships...

  16. 28 CFR 31.501 - Eligible applicants.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Eligible applicants. 31.501 Section 31.501 Judicial Administration DEPARTMENT OF JUSTICE OJJDP GRANT PROGRAMS Juvenile Accountability Incentive Block Grants § 31.501 Eligible applicants. (a) Eligible applicants. Eligible applicants in FY...

  17. 25 CFR 101.4 - Applications.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... application; (b) Current budget, balance sheet and operating statements; and (c) Pro forma budgets operating... the Commissioner. Applications shall include the name, current address and telephone number of the applicant(s); current and prior Taxpayer Identification Number—Employer Identification Number if a...

  18. 7 CFR 1942.104 - Application processing.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 13 2014-01-01 2013-01-01 true Application processing. 1942.104 Section 1942.104... § 1942.104 Application processing. (a) General. Prospective applicants should request assistance by... application is filed to discuss eligibility and Rural Development requirements and processing...

  19. Applications of uncooled microbolometer sensors

    NASA Astrophysics Data System (ADS)

    Breen, Thomas; Butler, Neal R.; Kohin, Margaret; Marshall, Charles A.; Murphy, Robert; Parker, Todd W.; Silva, Raymond J.

    1998-07-01

    Lockheed Martin IR Imaging Systems is developing low cost, high performance, uncooled infrared imaging products for both military and commercial applications. These products are based on microbolometer technology, a silicon micromachined sensor that combines wafer level silicon processing with a device structure capable of yielding excellent imaging performance. Here, in the first of a series of papers, we report on several applications that are utilizing the Lockheed Martin microbolometer sensor. The performance of our basic uncooled sensor has been measured (and reported in multiple papers) to determine sensor capabilities for insertion into both military and commercial products. Non-linearity of the sensor over a scene temperature range of 95 degrees Celsius is less than 0.5%. Our sensors typically have temporal NETDs of less than 70 mK as well as spatial NETDs of less than 50 mK. MRTD performance is less than 0.4 degrees Celsius at spatial frequencies more than 20% beyond Nyquist. Spatial noise variation over time has been measured and found to meet both commercial and military requirements with excellent spatial noise over wide scene and ambient temperature ranges. However, the multiple applications in which our uncooled sensors have been used have never been described in one report demonstrating the varied and unique uses of this product. Our sensor is now used by dozens of partners and customers for applications ranging from hand-held radiometric cameras to driving aids; from sniper location prototype cameras to helmet mounted mine detection sensors; from rifle sights to space sensors. These applications will be discussed along with their unique system level performance parameters. Video will be used to demonstrate the various applications discussed.

  20. Glass transition of adsorbed stereoregular PPMA by inverse gas chromatography at infinite dilution

    NASA Astrophysics Data System (ADS)

    Hamieh, T.; Rezzaki, M.; Grohens, Y.; Schultz, J.

    1998-10-01

    In this paper, we used inverse gas chromatography (IGC) at infinite dilution that proved to be a powerful technique to determine glass transition and other transitions of PMMA adsorbed on α-alumina. We highlighted the glass transition temperature of the system PMMA/α-Al2O3 with defined polymer tacticity at various covered surface fractions. Thus, the Tg of the adsorbed isotactic PMMA increases strongly as compared to the bulk value. The study of the physical chemical properties of PMMA/α-alumina revealed an important difference in the acidic and basic behaviour, in Lewis terms, of aluminium oxide covered by various concentrations of PMMA. It appears that there is a stabilisation of the physical chemical properties of PMMA/α-Al2O3 for a surface coverage above 50%. This study also highlighted an important effect of the tacticity of the polymer on the acid-base character of the system PMMA/Al2O3. Dans cet article, nous montrons que la chromatographie gazeuse inverse (CGI) à dilution infinie se révèle être une technique très intéressante pour la détermination de la transition vitreuse de polymères stéréoréguliers adsorbés sur des substrats solides tels que l'alumine. Nous avons mis en évidence des transitions attribuées aux phénomènes de relaxation béta, transition vitreuse et autres transitions des systèmes PMMA/Al2O3 de tacticité définie à différents taux de recouvrement. Ainsi, la Tg du PMMA isotactique adsorbé augmente de façon significative par rapport a celle du polymère massique. L'étude des propriétés physico-chimiques du système PMMA/Al2O3, révèle une différence importante dans le comportement acido-basique, au sens de Lewis, de l'alumine pour de taux de recouvrement en PMMA variables. Il apparaît qu'il y a stabilisation des propriétés physico-chimiques de PMMA/Al2O3 pour un taux de recouvrement en PMMA supérieur à 50 %. Cette étude a montré également une influence importante de la tacticité du polymère sur le

  1. Synthese et utilisation de fibres cellulosiques phosphatees pour la valorisation de la fibre vegetale dans l'amelioration des proprietes de surface du papier et la fabrication de materiaux ignifuges

    NASA Astrophysics Data System (ADS)

    Lentsolo Yalli, Gym Clerc

    Dans cette etude, nous souhaitions principalement greffer des groupements phosphates directement sur la cellulose comme materiau modele, et par la suite transposer les conditions optimales du design concu pour la cellulose, determine par modelisation a l'aide de l'outil JMP, sur la pate kraft. Ensuite, evaluer les proprietes physico-chimiques, optiques, d'hydrophilie, thermiques et d'inflammabilite des materiaux fabriques (feuilles ou pastilles fabriquees) a partir des fibres phosphorylees. Pour ce faire, nous avons pretraite la cellulose et la pate kraft dans une solution aqueuse de 10 a 15 % de LiCl a 70°C pendant 7 heures. Par la suite, nous avons procede a la reaction de phosphorylation in situ avec l'acide phosphorique et l'uree, dans des conditions de temperatures et de reactifs decrites par un design experimental, pendant 3 heures. La reaction de phosphorylation s'est realisee avec succes pour l'ensemble des resultats sur la cellulose, avec des taux de greffage variables selon les conditions operatoires. Les degres de substitutions (DSP), determines par ICP-OES, et les degres de polymerisation (DP), determines par viscosimetrie, etaient aussi variables, selon les conditions. L'etude des parametres experimentaux a permis de determiner les conditions optimales transposables sur la pate kraft (DSP = 1,47 et DP = 142,42 pour la cellulose, qui represente un taux de coupure de 38% de la fibre) et les facteurs critiques de la reaction. Les resultats de la reaction sur la fibre ont permis, non seulement de constater que les conditions utilisees pour la cellulose n'etaient directement transposables a la fibre, mais permettaient quand d'obtenir un DSP interessant ≥ a 1 avec un taux de coupure de 50 a 60 %. La structure du produit principal de la reaction (le sel de calcium du pyrophosphate d'ester de cellulose ou de pate kraft) a ete determinee par les analyses FTIR, XPS, RMN-13C et RMN-31P. L'etude de l'effet de la reaction de phosphorylation sur les proprietes

  2. Silica Materials for Medical Applications

    PubMed Central

    Vallet-Regí, María; Balas, Francisco

    2008-01-01

    The two main applications of silica-based materials in medicine and biotechnology, i.e. for bone-repairing devices and for drug delivery systems, are presented and discussed. The influence of the structure and chemical composition in the final characteristics and properties of every silica-based material is also shown as a function of the both applications presented. The adequate combination of the synthesis techniques, template systems and additives leads to the development of materials that merge the bioactive behavior with the drug carrier ability. These systems could be excellent candidates as materials for the development of devices for tissue engineering. PMID:19662110

  3. Nanotechnology application for pain therapy.

    PubMed

    Moradkhani, Mahmoud Reza; Karimi, Arash; Negahdari, Babak

    2017-04-10

    Prolonged delivery of analgesic drugs at target sites remains a critical issue for efficient pain management. The use of nano-carriers has been reported to facilitate applicable delivery of these agents to target sites with a reduced level of systemic toxicity. Different analgesics have been loaded onto various nano carriers, including those that are natural, synthetic and copolymer, for various medical applications. In this review, we will discuss the concept of nano-formulated carriers for analgesic drugs and their impacts on the field of pain management.

  4. Battery testing for photovoltaic applications

    SciTech Connect

    Hund, T.

    1996-11-01

    Battery testing for photovoltaic (PV) applications is funded at Sandia under the Department of Energy`s (DOE) Photovoltaic Balance of Systems (BOS) Program. The goal of the PV BOS program is to improve PV system component design, operation, reliability, and to reduce overall life-cycle costs. The Sandia battery testing program consists of: (1) PV battery and charge controller market survey, (2) battery performance and life-cycle testing, (3) PV charge controller development, and (4) system field testing. Test results from this work have identified market size and trends, PV battery test procedures, application guidelines, and needed hardware improvements.

  5. Manufacturing process applications team (MATeam)

    NASA Technical Reports Server (NTRS)

    Bangs, E. R.; Meyer, J. D.

    1978-01-01

    Activities of the manufacturing applications team (MATeam) in effecting widespread transfer of NASA technology to aid in the solution of manufacturing problems in the industrial sector are described. During the program's first year of operation, 450 companies, industry associations, and government agencies were contacted, 150 manufacturing problems were documented, and 20 potential technology transfers were identified. Although none of the technology transfers has been commercialized and put in use, several are in the applications engineering phase, and others are in the early stages of implementation. The technology transfer process is described and guidelines used for the preparation of problems statements are included.

  6. Argon laser application to endodontics

    NASA Astrophysics Data System (ADS)

    Blankenau, Richard J.; Ludlow, Marvin; Anderson, David

    1993-07-01

    The application of laser technology to endodontics has been studied for some time. At the present time several major problems are being investigated: (1) removal of infected tissues, (2) sterilization of canals, (3) obturation of canals, and (4) preservation of the vitality of supporting tissues. This list is not intended to imply other problems do not exist or have been solved, but it is a starting point. This paper reviews some of the literature that relates to laser applications to endodontics and concludes with some of the findings from our investigation.

  7. Space applications of diamagnetic suspensions

    NASA Technical Reports Server (NTRS)

    Pelrine, Ronald E.

    1992-01-01

    Conventional noncontact magnetic suspensions require power and sensor feedback to maintain stability of the levitated object. Magnetic suspensions using superconductors require neither power nor feedback for stability but must be maintained at low temperatures. This paper discusses a little known type of magnetic bearing that does not require power, sensor feedback, or cooling: diamagnetic suspension. While the bearing pressure for diamagnetic suspensions is typically limited to 1 g/sq cm, their simplicity, environmental tolerances, and wide range of material choices suggest that they may be useful for a number of space applications. This paper discusses the fundamentals of diamagnetic suspensions as well as their potential space applications.

  8. Application of robots in space.

    NASA Technical Reports Server (NTRS)

    Johnsen, E. G.

    1971-01-01

    Robots are defined as electromechanical systems (with local computers) receiving inputs from sensors, and in turn, controlling motors and effectors to do tasks requiring some measure of intelligence and permitting the whole system to interact with the real world. Robot systems for space applications are categorized into three general groups consisting of roving exploration robots, spacecraft robots, and planet development robots. The functions of systems in each category are defined in terms of intended applications, and requirements for operating and decision making are outlined. Further developments which must be achieved in robot technology are summarized.

  9. Accelerators for research and applications

    SciTech Connect

    Alonso, J.R.

    1990-06-01

    The newest particle accelerators are almost always built for extending the frontiers of research, at the cutting edge of science and technology. Once these machines are operating and these technologies mature, new applications are always found, many of which touch our lives in profound ways. The evolution of accelerator technologies will be discussed, with descriptions of accelerator types and characteristics. The wide range of applications of accelerators will be discussed, in fields such as nuclear science, medicine, astrophysics and space-sciences, power generation, airport security, materials processing and microcircuit fabrication. 13 figs.

  10. Solid Lubrication Fundamentals and Applications

    NASA Technical Reports Server (NTRS)

    Miyoshi, Kazuhisa

    2001-01-01

    Solid Lubrication Fundamentals and Applications description of the adhesion, friction, abrasion, and wear behavior of solid film lubricants and related tribological materials, including diamond and diamond-like solid films. The book details the properties of solid surfaces, clean surfaces, and contaminated surfaces as well as discussing the structures and mechanical properties of natural and synthetic diamonds; chemical-vapor-deposited diamond film; surface design and engineering toward wear-resistant, self-lubricating diamond films and coatings. The author provides selection and design criteria as well as applications for synthetic and natural coatings in the commercial, industrial and aerospace industries..

  11. On methane pyrolysis special applications

    NASA Astrophysics Data System (ADS)

    Toncu, D. C.; Toncu, G.; Soleimani, S.

    2015-11-01

    Methane pyrolysis represents one of the most important processes in industrial use, with applications rising from the chemical and petrochemical industry, combustion, materials and protective coatings. Despite the intense research, experimental data lack kinetic aspects, and the thermodynamics involved often leads to inaccurate results when applied to various systems. Carrying out a comparative analysis of several available data on methane pyrolysis, the paper aims to study the phenomenon of methane pyrolysis under different environments (combustion and plasma), concluding on the most possible reaction pathways involved in many of its applications. Computer simulation using different database underlines the conclusion, helping to the understanding of methane pyrolysis importance in future technologies.

  12. Micromirrors: overview and application roadmap

    NASA Astrophysics Data System (ADS)

    Bouchaud, Jeremie; Bahle, Carsten; Wicht, Henning

    2005-01-01

    The Telecom sector has driven until 2000 the development of micro-mirrors with subsystems like optical cross-connects and add/drop multiplexers for all-optical networks. Following the collapse of the telecom equipment market, much attention has been given to emerging applications in consumer electronics, IT, industry, and biomedical. WTC will give an overview on existing and emerging markets of micro-mirrors outside telecom. The various micro-mirror techniques and their respective applications from high value niches to mass markets will be presented. The supply chain will be analysed and a roadmap of implementation of micro-mirrors will be proposed.

  13. Keeping Wax Liquid For Application

    NASA Technical Reports Server (NTRS)

    Meyer, Russell V.

    1989-01-01

    "Hot gun" applies masking wax and similar materials in liquid state. Holding chamber and nozzle supply continuous heat to wax, and wax injects directly into hole as liquid. Nozzles of various sizes interchange so one selects nozzle having opening suited to viscosity of wax and size of hole in particular application. Gun fast, eliminates repeated application, and greatly reduces cleanup time. Available commercially for applying hot glue, used to ensure wax penetrates and fills holes, flow passages, and manifold passages so contamination sealed off during manufacturing operations.

  14. Applications of Tethers in Space

    NASA Technical Reports Server (NTRS)

    Cron, A. C.

    1985-01-01

    The proceedings of the first workshop on applications of tethers in space are summarized. The workshop gathered personalities from industry, academic institutions and government to discuss the relatively new area of applied technology of very long tethers in space to a broad spectrum of future space missions. A large number of tethered concepts and configurations was presented covering electrodynamic interaction tethers, tethered transportation through angular momentum exchange, tethered constellations, low gravity utilization, applicable technology, and tethered test facilities. Specific recommendations were made to NASA in each area.

  15. Electron tubes for industrial applications

    NASA Astrophysics Data System (ADS)

    Gellert, Bernd

    1994-05-01

    This report reviews research and development efforts within the last years for vacuum electron tubes, in particular power grid tubes for industrial applications. Physical and chemical effects are discussed that determine the performance of todays devices. Due to the progress made in the fundamental understanding of materials and newly developed processes the reliability and reproducibility of power grid tubes could be improved considerably. Modern computer controlled manufacturing methods ensure a high reproducibility of production and continuous quality certification according to ISO 9001 guarantees future high quality standards. Some typical applications of these tubes are given as an example.

  16. Veterinary applications of infrared thermography.

    PubMed

    Rekant, Steven I; Lyons, Mark A; Pacheco, Juan M; Arzt, Jonathan; Rodriguez, Luis L

    2016-01-01

    Abnormal body temperature is a major indicator of disease; infrared thermography (IRT) can assess changes in body surface temperature quickly and remotely. This technology can be applied to a myriad of diseases of various etiologies across a wide range of host species in veterinary medicine. It is used to monitor the physiologic status of individual animals, such as measuring feed efficiency or diagnosing pregnancy. Infrared thermography has applications in the assessment of animal welfare, and has been used to detect soring in horses and monitor stress responses. This review addresses the variety of uses for IRT in veterinary medicine, including disease detection, physiologic monitoring, welfare assessment, and potential future applications.

  17. Cognitive engineering in aerospace applications

    NASA Technical Reports Server (NTRS)

    Woods, David D.

    1993-01-01

    The progress that was made with respect to the objectives and goals of the research that is being carried out in the Cognitive Systems Engineering Laboratory (CSEL) under a Cooperative Agreement with NASA Ames Research Center is described. The major objective of this project is to expand the research base in Cognitive Engineering to be able to support the development and human-centered design of automated systems for aerospace applications. This research project is in support of the Aviation Safety/Automation Research plan and related NASA research goals in space applications.

  18. Water electrolysis and its applications

    SciTech Connect

    Shimamune, T.; Nakajima, Y.; Nishiki, Y.; Tanaka, M.

    1995-12-31

    Permelec Electrode has commercialized various electrodes for industrial uses since 1969. Recently, we are focusing on developing several electrolytic systems which are composed of such electrodes and an ion exchange membrane. The membrane has abilities of separating ions and proceeding electrolysis even in the solution of low conductivity. It is clarified that various applications can be realized by this type of the electrolysis cell, so called the zero gap electrolysis system. The profitable and potential applications are introduced here, such as ozone production and diluted salt electrolytic systems for disinfection and water treatments.

  19. Technology application at Rockwell International

    NASA Technical Reports Server (NTRS)

    Meechan, C. J.

    1974-01-01

    Technology diffusion at Rockwell International has progressed from the application of special skills to solve specific problems to the transfer of the required people and skills to allow the commercial divisions to solve their own problems and develop or improve their own products. Our prime effort is concentrated on commercial industrial applications. Rockwell's major emphasis on advanced technology utilization is directed through three operational modes, namely, transfer from technologically developed to underdeveloped organizations within the company; transfer between technologically developed organizations to form new operations within the company; and formation of high technology spin-off organizations beyond the corporate entity.

  20. Applications of composites to armaments

    NASA Technical Reports Server (NTRS)

    Oplinger, Don W.

    1990-01-01

    The U.S. Army Materials Technology Laboratory (MTL) has been engaged in investigating the feasibility of applying composite materials to the lightening of artillery structural components since about 1982. In this period a number of efforts were carried out either in-house at MTL or by supporting organizations, including Benet Laboratory and the Oak Ridge National Laboratory, aimed at investigating applications to various components of towed artillery. Salient features of these efforts and some important conclusions that have come out of them are described. In addition to organic matrix composites, discontinuously reinforced metal matrix composites appear to have great potential for weight reduction in this type of application.

  1. Diagnostic applications of nail clippings.

    PubMed

    Stephen, Sasha; Tosti, Antonella; Rubin, Adam I

    2015-04-01

    "Nail clipping is a simple technique for diagnosis of several nail unit dermatoses. This article summarizes the practical approach, utility, and histologic findings of a nail clipping in evaluation of onychomycosis, nail unit psoriasis, onychomatricoma, subungual hematoma, melanonychia, and nail cosmetics, and the forensic applications of this easily obtained specimen. It reviews important considerations in optimizing specimen collection, processing methods, and efficacy of special stains in several clinical contexts. Readers will develop a greater understanding and ease of application of this indispensable procedure in assessing nail unit dermatoses."

  2. Evaluation Theory, Models, and Applications

    ERIC Educational Resources Information Center

    Stufflebeam, Daniel L.; Shinkfield, Anthony J.

    2007-01-01

    "Evaluation Theory, Models, and Applications" is designed for evaluators and students who need to develop a commanding knowledge of the evaluation field: its history, theory and standards, models and approaches, procedures, and inclusion of personnel as well as program evaluation. This important book shows how to choose from a growing…

  3. Microcomputers: Applications in Vocational Education.

    ERIC Educational Resources Information Center

    Rodenstein, Judith, Ed.; Lambert, Roger, Ed.

    This handbook was assembled for vocational educators so that they can see the applications of microcomputers in both their instructional and administrative tasks. The 22 papers included in the handbook were written by educators who are and have been using microcomputers extensively in their work. The first section of the handbook discusses the…

  4. Customising PRESAGE® for diverse applications

    NASA Astrophysics Data System (ADS)

    Juang, T.; Newton, J.; Niebanck, M.; Benning, R.; Adamovics, J.; Oldham, M.

    2013-06-01

    PRESAGE® is a solid radiochromic dosimeter consisting of a polyurethane matrix, a triarylmethane leuco dye, and a trihalomethane initiator. Varying the composition and/or relative amounts of these constituents can affect the dose sensitivity, post-irradiation stability, and physical properties of the dosimeter. This allows customisation of PRESAGE® to meet application-specific requirements, such as low sensitivity for high dose applications, stability for remote dosimetry, optical clearing for reusability, and tissue-like elasticity for deformable dosimetry. This study evaluates five hard, non-deformable PRESAGE® formulations and six deformable PRESAGE® formulations and characterizes them for dose sensitivity and stability. Results demonstrated sensitivities in the range of 0.0029 - 0.0467 ΔOD/(Gy·cm) for hard formulations and 0.0003 - 0.0056 ΔOD/(Gy·cm) for deformable formulations. Exceptional stability was seen in both standard and low sensitivity non-deformable formulations, with promising applications for remote dosimetry. Deformable formulations exhibited potential for reusability with strong post-irradiation optical clearing. Tensile compression testing of the deformable formulations showed elastic response consistent with soft tissues, with further testing required for direct comparison. These results demonstrate that PRESAGE® dosimeters have the flexibility to be adapted for a wide spectrum of clinical applications.

  5. Customising PRESAGE® for diverse applications

    PubMed Central

    Juang, T; Newton, J; Niebanck, M; Benning, R; Adamovics, J; Oldham, M

    2013-01-01

    PRESAGE® is a solid radiochromic dosimeter consisting of a polyurethane matrix, a triarylmethane leuco dye, and a trihalomethane initiator. Varying the composition and/or relative amounts of these constituents can affect the dose sensitivity, post-irradiation stability, and physical properties of the dosimeter. This allows customisation of PRESAGE® to meet application-specific requirements, such as low sensitivity for high dose applications, stability for remote dosimetry, optical clearing for reusability, and tissue-like elasticity for deformable dosimetry. This study evaluates five hard, non-deformable PRESAGE® formulations and six deformable PRESAGE® formulations and characterizes them for dose sensitivity and stability. Results demonstrated sensitivities in the range of 0.0029 – 0.0467 ΔOD/(Gy·cm) for hard formulations and 0.0003 – 0.0056 ΔOD/(Gy·cm) for deformable formulations. Exceptional stability was seen in both standard and low sensitivity non-deformable formulations, with promising applications for remote dosimetry. Deformable formulations exhibited potential for reusability with strong post-irradiation optical clearing. Tensile compression testing of the deformable formulations showed elastic response consistent with soft tissues, with further testing required for direct comparison. These results demonstrate that PRESAGE® dosimeters have the flexibility to be adapted for a wide spectrum of clinical applications. PMID:24567739

  6. Radiation biodosimetry: Applications for spaceflight

    NASA Astrophysics Data System (ADS)

    Blakely, W. F.; Miller, A. C.; Grace, M. B.; McLeland, C. B.; Luo, L.; Muderhwa, J. M.; Miner, V. L.; Prasanna, P. G. S.

    The multiparametric dosimetry system that we are developing for medical radiological defense applications could be adapted for spaceflight environments. The system complements the internationally accepted personnel dosimeters and cytogenetic analysis of chromosome aberrations, considered the best means of documenting radiation doses for health records. Our system consists of a portable hematology analyzer, molecular biodosimetry using nucleic acid and antigen-based diagnostic equipment, and a dose assessment management software application. A dry-capillary tube reagent-based centrifuge blood cell counter (QBC Autoread Plus, Beckon Dickinson Bioscience) measures peripheral blood lymphocytes and monocytes, which could determine radiation dose based on the kinetics of blood cell depletion. Molecular biomarkers for ionizing radiation exposure (gene expression changes, blood proteins) can be measured in real time using such diagnostic detection technologies as miniaturized nucleic acid sequences and antigen-based biosensors, but they require validation of dose-dependent targets and development of optimized protocols and analysis systems. The Biodosimetry Assessment Tool, a software application, calculates radiation dose based on a patient's physical signs and symptoms and blood cell count analysis. It also annotates location of personnel dosimeters, displays a summary of a patient's dosimetric information to healthcare professionals, and archives the data for further use. These radiation assessment diagnostic technologies can have dual-use applications supporting general medical-related care.

  7. Neural Networks for Speech Application.

    DTIC Science & Technology

    1987-11-01

    This is a general introduction to the reemerging technology called neural networks , and how these networks may provide an important alternative to...traditional forms of computing in speech applications. Neural networks , sometimes called Artificial Neural Systems (ANS), have shown promise for solving

  8. Stereoscopic applications for design visualization

    NASA Astrophysics Data System (ADS)

    Gilson, Kevin J.

    2007-02-01

    Advances in display technology and 3D design visualization applications have made real-time stereoscopic visualization of architectural and engineering projects a reality. Parsons Brinkerhoff (PB) is a transportation consulting firm that has used digital visualization tools from their inception and has helped pioneer the application of those tools to large scale infrastructure projects. PB is one of the first Architecture/Engineering/Construction (AEC) firms to implement a CAVE- an immersive presentation environment that includes stereoscopic rear-projection capability. The firm also employs a portable stereoscopic front-projection system, and shutter-glass systems for smaller groups. PB is using commercial real-time 3D applications in combination with traditional 3D modeling programs to visualize and present large AEC projects to planners, clients and decision makers in stereo. These presentations create more immersive and spatially realistic presentations of the proposed designs. This paper will present the basic display tools and applications, and the 3D modeling techniques PB is using to produce interactive stereoscopic content. The paper will discuss several architectural and engineering design visualizations we have produced.

  9. Applications of Geocoding and Mapping.

    ERIC Educational Resources Information Center

    Costa, Crist H.

    The application of computer programing to construction of maps and geographic distributions of data has been called geocoding. This new use of the computer allows much more rapid analysis of various demographic characteristics. In particular, this paper describes the use of computer geocoding in the development of a plot of student density in…

  10. Holographic cinematography and its applications

    NASA Astrophysics Data System (ADS)

    Smigielski, P.; Fagot, H.; Albe, F.

    1986-08-01

    Recording of single-exposure cineholograms of living bodies on 126-mm films, at a repetition rate of 25 holograms per second with the help of a frequency-doubled pulse YAG-laser; and recording of double-exposure cineholograms of reflecting moving objects for medical and industrial applications are reported. Limitations of 3D movies are described.

  11. Environmentally compatible applications of biotechnology

    SciTech Connect

    Frederick, R.J.; Egan, M.

    1994-09-01

    Using living organisms to minimize harmful human impact on the environment is relatively recent thrust of biotechnology. Biotechnology developments are being employed as green technologies in a variety of applications that fall into the category of environmental biotechnology. The following aspects of biotechnology are discussed in this article: biosensors; bioremediation; bioleaching; natural plastics; clean fuels; pesticides; regulation of biotechnology products and processes. 58 refs.

  12. A Solar Sailcraft Simulation Application

    ERIC Educational Resources Information Center

    Celeda, Tomáš

    2013-01-01

    An application was created to encourage students' practical knowledge of gravitational fields, the law of conservation of energy and other phenomena, such as gravitational slingshots. The educational software simulates the flight of a solar sail spacecraft between two planets of the Solar System using the laws of gravity and radiation…

  13. Expert system application education project

    NASA Technical Reports Server (NTRS)

    Gonzelez, Avelino J.; Ragusa, James M.

    1988-01-01

    Artificial intelligence (AI) technology, and in particular expert systems, has shown potential applicability in many areas of operation at the Kennedy Space Center (KSC). In an era of limited resources, the early identification of good expert system applications, and their segregation from inappropriate ones can result in a more efficient use of available NASA resources. On the other hand, the education of students in a highly technical area such as AI requires an extensive hands-on effort. The nature of expert systems is such that proper sample applications for the educational process are difficult to find. A pilot project between NASA-KSC and the University of Central Florida which was designed to simultaneously address the needs of both institutions at a minimum cost. This project, referred to as Expert Systems Prototype Training Project (ESPTP), provided NASA with relatively inexpensive development of initial prototype versions of certain applications. University students likewise benefit by having expertise on a non-trivial problem accessible to them at no cost. Such expertise is indispensible in a hands-on training approach to developing expert systems.

  14. Overset Applications at NASA JSC

    NASA Technical Reports Server (NTRS)

    Gomez, Reynaldo J., III; Greathouse, James S.; Stuart, Phil C.; Lillard, Randy P.; Vicker, Darby J.

    2002-01-01

    This slide presentation reviews the use of the Overset grid approach for analysis and graphically presenting the mathematical grids used for CFD analysis. Some of the applications that are reviewed are: the X-38 and Aerodynamic Research Facility (ARF) Wind Tunnel Simulations of separation aerodynamics

  15. Regional Security Application and Checkmate!

    DTIC Science & Technology

    2000-04-01

    30 F. Time, Geo- Spatial , and Resource Constraints ................................................ 32 G. Summary...leverage human interactions and computer modeling and tools to provide participants with useful insights on complex multi -disciplinary issues. It’s...and interdependent multi -disciplinary issues associated with such challenges. In this regard: (a) A regional S.E.N.S.E. application that addresses

  16. Action Research: Theory and Applications

    ERIC Educational Resources Information Center

    Jefferson, Renée N.

    2014-01-01

    Action research as a methodology is suitable for use within academic library settings. Its theoretical foundations are located in several disciplines and its applications span across many professions. In this article, an overview of the theoretical beginnings and evolution of action research is presented. Approaches generally used in conducting an…

  17. Database Transformations for Biological Applications

    SciTech Connect

    Overton, C.; Davidson, S. B.; Buneman, P.; Tannen, V.

    2001-04-11

    The goal of this project was to develop tools to facilitate data transformations between heterogeneous data sources found throughout biomedical applications. Such transformations are necessary when sharing data between different groups working on related problems as well as when querying data spread over different databases, files and software analysis packages.

  18. Plastic Materials for Insulating Applications.

    ERIC Educational Resources Information Center

    Wang, S. F.; Grossman, S. J.

    1987-01-01

    Discusses the production and use of polymer materials as thermal insulators. Lists several materials that provide varying degrees of insulation. Describes the production of polymer foam and focuses on the major applications of polystyrene foam, polyurethane foam, and polyisocyanurate foam. (TW)

  19. Fluidics: Basic components and applications

    NASA Astrophysics Data System (ADS)

    Joyce, J. W.

    1983-08-01

    Since its discovery at Harry Diamond Lab. in 1959, fluidics has gradually been developed into a viable technology. This report describes fluidic components and systems now in use or ready for use in many applications. The fluidic technology provides sensing, computing, and controlling functions with fluid power through interaction of fluid streams. Since fluidics can perform these functions without mechanical moving parts that will wear out, it has the advantages of simplicity and reliability. Other advantages are the low cost, environmental insensitivity, and safety of fluidic systems. Commercial applications of fluidics in the aerospace industry, include medicine, and personal-use items. The first aerospace application in production in the United States was for the thrust-reverser control for a DC-10 airplane. In industry, fluidics has been applied to air-conditioning controls, machine controls, process controls, and production-line controls. One of the first commercial applications of fluidics was for life-support medical equipment. For military use, fluidics has been successfully applied to a fluidic generator to convert pneumatic energy into electrical energy, a fluidic stability augmentation system for helicopters, and a pressure-regulating system for aircraft. Under development are rate sensing circuits for roll rate control of cannon-launched guided projectiles and missiles, and a fluidic capillary pyrometer for continuous temperature measurements in high-temperature process control.

  20. SEOS frame camera applications study

    NASA Technical Reports Server (NTRS)

    1974-01-01

    A research and development satellite is discussed which will provide opportunities for observation of transient phenomena that fall within the fixed viewing circle of the spacecraft. The evaluation of possible applications for frame cameras, for SEOS, are studied. The computed lens characteristics for each camera are listed.

  1. Neural network applications in telecommunications

    NASA Technical Reports Server (NTRS)

    Alspector, Joshua

    1994-01-01

    Neural network capabilities include automatic and organized handling of complex information, quick adaptation to continuously changing environments, nonlinear modeling, and parallel implementation. This viewgraph presentation presents Bellcore work on applications, learning chip computational function, learning system block diagram, neural network equalization, broadband access control, calling-card fraud detection, software reliability prediction, and conclusions.

  2. Applications of nanotechnology in orthopaedics.

    PubMed

    Tasker, L H; Sparey-Taylor, G J; Nokes, L D M

    2007-03-01

    Nanotechnology is the application of science and engineering at the nanoscale. A diverse range of applications are beginning to emerge in all areas of medicine. We performed a survey from November 2005 to March 2006 using the Internet search engines PubMed, ScienceDirect, ISI Web of Knowledge, and Google Scholar. We report on the role of nanotechnology in orthopaedics, exploring current and potential applications. Nanostructured materials have been proposed as the next generation of orthopaedic implant properties by creating a surface environment more conducive for osteoblast function. Bone substitute materials, whose nanoscale composition emulates the hierarchic organization of natural bone, shows initiation of the desirable formation of an apatite layer. Nanotechnology also has been harnessed to improve the cutting performance and quality of surgical blades. Postoperative infection rates may be reduced by using nanofibrous membrane wound dressings containing antibacterial properties. The most notable application of nanotechnology in orthopaedics may be drug delivery, including nanotherapeutics for treating bone cancer and arthritis. Nanotechnology is being used in orthopaedics, and likely will play a valuable role in future developments.

  3. Geophysical applications of satellite altimetry

    SciTech Connect

    Sandwell, D.T. )

    1991-01-01

    Publications related to geophysical applications of Seasat and Geosat altimetry are reviewed for the period 1987-1990. Problems discussed include geoid and gravity errors, regional geoid heights and gravity anomalies, local gravity field/flexure, plate tectonics, and gridded geoid heights/gravity anomalies. 99 refs.

  4. Smartphone applications for seizure management.

    PubMed

    Pandher, Puneet Singh; Bhullar, Karamdeep Kaur

    2016-06-01

    Technological advancements continue to provide innovative ways of enhancing patient care in medicine. In particular, the growing popularity of smartphone technology has seen the recent emergence of a myriad of healthcare applications (or apps) that promise to help shape the way in which health information is delivered to people worldwide. While limited research already exists on a range of such apps, our study is the first to examine the salient features of smartphone applications as they apply to the area of seizure management. For the purposes of this review, we conducted a search of the official online application stores of the five major smartphone platforms: iPhone, Android, Blackberry, Windows Mobile and Nokia-Symbian. Apps were included if they reported to contain some information or tools relating to seizure management and excluded if they were aimed exclusively at health professionals. A total of 28 applications met these criteria. Overall, we found an increasing number of epilepsy apps available on the smartphone market, but with only a minority offering comprehensive educational information alongside tools such as seizure diaries, medication tracking and/or video recording.

  5. Application-Program-Installer Builder

    NASA Technical Reports Server (NTRS)

    Wolgast, Paul; Demore, Martha; Lowik, Paul

    2007-01-01

    A computer program builds application programming interfaces (APIs) and related software components for installing and uninstalling application programs in any of a variety of computers and operating systems that support the Java programming language in its binary form. This program is partly similar in function to commercial (e.g., Install-Shield) software. This program is intended to enable satisfaction of a quasi-industry-standard set of requirements for a set of APIs that would enable such installation and uninstallation and that would avoid the pitfalls that are commonly encountered during installation of software. The requirements include the following: 1) Properly detecting prerequisites to an application program before performing the installation; 2) Properly registering component requirements; 3) Correctly measuring the required hard-disk space, including accounting for prerequisite components that have already been installed; and 4) Correctly uninstalling an application program. Correct uninstallation includes (1) detecting whether any component of the program to be removed is required by another program, (2) not removing that component, and (3) deleting references to requirements of the to-be-removed program for components of other programs so that those components can be properly removed at a later time.

  6. Tired of Teaching Software Applications?

    ERIC Educational Resources Information Center

    Lippert, Susan K.; Granger, Mary J.

    Many university business schools have an instructor-led course introducing computer software application packages. This course is often required for all undergraduates and is a prerequisite to other courses, such as accounting, finance, marketing, and operations management. Knowledge and skills gained in this course should enable students not only…

  7. Porphyrinoids for Chemical Sensor Applications.

    PubMed

    Paolesse, Roberto; Nardis, Sara; Monti, Donato; Stefanelli, Manuela; Di Natale, Corrado

    2017-02-22

    Porphyrins and related macrocycles have been intensively exploited as sensing materials in chemical sensors, since in these devices they mimic most of their biological functions, such as reversible binding, catalytic activation, and optical changes. Such a magnificent bouquet of properties allows applying porphyrin derivatives to different transducers, ranging from nanogravimetric to optical devices, also enabling the realization of multifunctional chemical sensors, in which multiple transduction mechanisms are applied to the same sensing layer. Potential applications are further expanded through sensor arrays, where cross-selective sensing layers can be applied for the analysis of complex chemical matrices. The possibility of finely tuning the macrocycle properties by synthetic modification of the different components of the porphyrin ring, such as peripheral substituents, molecular skeleton, coordinated metal, allows creating a vast library of porphyrinoid-based sensing layers. From among these, one can select optimal arrays for a particular application. This feature is particularly suitable for sensor array applications, where cross-selective receptors are required. This Review briefly describes chemical sensor principles. The main part of the Review is divided into two sections, describing the porphyrin-based devices devoted to the detection of gaseous or liquid samples, according to the corresponding transduction mechanism. Although most devices are based on porphyrin derivatives, seminal examples of the application of corroles or other porphyrin analogues are evidenced in dedicated sections.

  8. Graphite for fusion energy applications

    SciTech Connect

    Eatherly, W.P.; Clausing, R.E.; Strehlow, R.A.; Kennedy, C.R.; Mioduszewski, P.K.

    1987-03-01

    Graphite is in widespread and beneficial use in present fusion energy devices. This report reflects the view of graphite materials scientists on using graphite in fusion devices. Graphite properties are discussed with emphasis on application to fusion reactors. This report is intended to be introductory and descriptive and is not intended to serve as a definitive information source. (JDH)

  9. Sustainable land application: an overview.

    PubMed

    O'Connor, G A; Elliott, H A; Basta, N T; Bastian, R K; Pierzynski, G M; Sims, R C; Smith, J E

    2005-01-01

    Man has land-applied societal nonhazardous wastes for centuries as a means of disposal and to improve the soil via the recycling of nutrients and the addition of organic matter. Nonhazardous wastes include a vast array of materials, including manures, biosolids, composts, wastewater effluents, food-processing wastes, industrial by-products; these are collectively referred to herein as residuals. Because of economic restraints and environmental concerns about land-filling and incineration, interest in land application continues to grow. A major lesson that has been learned, however, is that the traditional definition of land application that emphasizes applying residuals to land in a manner that protects human and animal health, safeguards soil and water resources, and maintains long-term ecosystem quality is incomplete unless the earning of public trust in the practices is included. This overview provides an introduction to a subset of papers and posters presented at the conference, "Sustainable Land Application," held in Orlando, FL, in January 2004. The USEPA, USDA, and multiple national and state organizations with interest in, and/or responsibilities for, ensuring the sustainability of the practice sponsored the conference. The overriding conference objectives were to highlight significant developments in land treatment theory and practice, and to identify future research needs to address critical gaps in the knowledge base that must be addressed to ensure sustainable land application of residuals.

  10. Composite structural materials. [aircraft applications

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

    1981-01-01

    The development of composite materials for aircraft applications is addressed with specific consideration of physical properties, structural concepts and analysis, manufacturing, reliability, and life prediction. The design and flight testing of composite ultralight gliders is documented. Advances in computer aided design and methods for nondestructive testing are also discussed.

  11. Teaching Psychology Students Computer Applications.

    ERIC Educational Resources Information Center

    Atnip, Gilbert W.

    This paper describes an undergraduate-level course designed to teach the applications of computers that are most relevant in the social sciences, especially psychology. After an introduction to the basic concepts and terminology of computing, separate units were devoted to word processing, data analysis, data acquisition, artificial intelligence,…

  12. Clinical applications of breath testing

    PubMed Central

    Paschke, Kelly M; Mashir, Alquam

    2010-01-01

    Breath testing has the potential to benefit the medical field as a cost-effective, non-invasive diagnostic tool for diseases of the lung and beyond. With growing evidence of clinical worth, standardization of methods, and new sensor and detection technologies the stage is set for breath testing to gain considerable attention and wider application in upcoming years. PMID:21173863

  13. Breaststroke, a Research Based Application

    ERIC Educational Resources Information Center

    Hallett, Bee

    1978-01-01

    A biomechanical analysis of the breaststroke is presented, applying hydrodynamic research to develop an understanding of propulsive forces acting to overcome resistance, and to intorduce modifications in stroke mechanics which would develop a more efficient psychomotor pattern. The applicability of the research to all swimming strokes is noted.…

  14. Resumes, Applications, and Cover Letters

    ERIC Educational Resources Information Center

    Crosby, Olivia

    2009-01-01

    Good resumes, applications, and cover letters broadcast one's abilities. They tell employers how one's qualifications match a job's responsibilities. If these critical preliminaries are constructed well, one has a better chance of landing interviews--and, eventually, a job. This article provides some guidelines for creating resumes and cover…

  15. Applications of active microwave imagery

    NASA Technical Reports Server (NTRS)

    Weber, F. P.; Childs, L. F.; Gilbert, R.; Harlan, J. C.; Hoffer, R. M.; Miller, J. M.; Parsons, J.; Polcyn, F.; Schardt, B. B.; Smith, J. L.

    1978-01-01

    The following topics were discussed in reference to active microwave applications: (1) Use of imaging radar to improve the data collection/analysis process; (2) Data collection tasks for radar that other systems will not perform; (3) Data reduction concepts; and (4) System and vehicle parameters: aircraft and spacecraft.

  16. TAMA. TIGER Arc Modification Application

    SciTech Connect

    Armstrong, H

    1994-06-03

    The application enables the geometric correction of TIGER arcs to a more accurate spatial data set. This is done in a structured automated environment according to Census Bureau guidelines and New Mexico state GIS standards. Arcs may be deleted, added, combined, split, and moved relative to a coverage or image displayed in the background.

  17. Data mining applications in healthcare.

    PubMed

    Koh, Hian Chye; Tan, Gerald

    2005-01-01

    Data mining has been used intensively and extensively by many organizations. In healthcare, data mining is becoming increasingly popular, if not increasingly essential. Data mining applications can greatly benefit all parties involved in the healthcare industry. For example, data mining can help healthcare insurers detect fraud and abuse, healthcare organizations make customer relationship management decisions, physicians identify effective treatments and best practices, and patients receive better and more affordable healthcare services. The huge amounts of data generated by healthcare transactions are too complex and voluminous to be processed and analyzed by traditional methods. Data mining provides the methodology and technology to transform these mounds of data into useful information for decision making. This article explores data mining applications in healthcare. In particular, it discusses data mining and its applications within healthcare in major areas such as the evaluation of treatment effectiveness, management of healthcare, customer relationship management, and the detection of fraud and abuse. It also gives an illustrative example of a healthcare data mining application involving the identification of risk factors associated with the onset of diabetes. Finally, the article highlights the limitations of data mining and discusses some future directions.

  18. Microcomputer Business Applications. Teacher Edition.

    ERIC Educational Resources Information Center

    James, Marcia; And Others

    This curriculum guide is designed to teach concepts associated with business applications of microcomputers. It can be used in marketing, office education, and computer literacy courses. Most activities can be done in less than 1 hour. The course is organized in eight units that cover the following: (1) systems and software; (2) electronic filing;…

  19. Microcomputer Applications in Analytical Chemistry.

    ERIC Educational Resources Information Center

    Long, Joseph W.

    The first part of this paper addresses the following topics: (1) the usefulness of microcomputers; (2) applications for microcomputers in analytical chemistry; (3) costs; (4) major microcomputer systems and subsystems; and (5) which microcomputer to buy. Following these brief comments, the major focus of the paper is devoted to a discussion of…

  20. Microcomputer Application in Industrial Education.

    ERIC Educational Resources Information Center

    Matthews, John I.

    1980-01-01

    A microcomputer for use in industrial education programs is described. The system has wide application and does not require programing skills. Graduate students may purchase disks formatted to do word processing and statistics then proceed to do the thesis or dissertation final copy at the keyboard of the terminal. (CT)

  1. [Application of robots in stomatology].

    PubMed

    Zhou, Meng-Qi; Zhang, Jin-Ning; Hong, Jin

    2016-10-01

    Recently, the robot technology has been developed rapidly and the medical robot has been used in many clinical areas, especially in the field of stomatology. The application of robot in stomatology will break the traditional mode of treatment and bring a new technological revolution. This paper introduced the advantages, the current situation and the development prospect of applying robot in stomatology.

  2. Applications Of Modern Systems Analysis

    NASA Technical Reports Server (NTRS)

    Wagner, Robert C.; Biernacki, John V.; Bodi, Robert F.; Juhasz, John E.

    1994-01-01

    cour papers discuss applications of interdisciplinary methodologies incorporating elaborate mathematical models and computer programs as paradigms of modern systems analysis. Unifying concept underlying presentations is need for more sophisticated methods of systems analysis to manage increasingly complex engineering and socioeconomic systems.

  3. Neoclassical Theory and Its Applications

    SciTech Connect

    Shaing, Ker-Chung

    2015-11-20

    The grant entitled Neoclassical Theory and Its Applications started on January 15 2001 and ended on April 14 2015. The main goal of the project is to develop neoclassical theory to understand tokamak physics, and employ it to model current experimental observations and future thermonuclear fusion reactors. The PI had published more than 50 papers in refereed journals during the funding period.

  4. Rainbow holography and its applications

    NASA Astrophysics Data System (ADS)

    Vlasov, N. G.; Ivanov, Vladimir S.

    1993-09-01

    The general equations of the rainbow holography are deduced. Their analysis makes it possible to offer different methods of the rainbow holographic images production. A new way of using the rainbow holograms as optical elements for effective color illuminating of transparent, specular, and polished objects is proposed. Application fields are the advertising industry, shop windows design, etc.

  5. Lunar Applications in Reconfigurable Computing

    NASA Technical Reports Server (NTRS)

    Somervill, Kevin

    2008-01-01

    NASA s Constellation Program is developing a lunar surface outpost in which reconfigurable computing will play a significant role. Reconfigurable systems provide a number of benefits over conventional software-based implementations including performance and power efficiency, while the use of standardized reconfigurable hardware provides opportunities to reduce logistical overhead. The current vision for the lunar surface architecture includes habitation, mobility, and communications systems, each of which greatly benefit from reconfigurable hardware in applications including video processing, natural feature recognition, data formatting, IP offload processing, and embedded control systems. In deploying reprogrammable hardware, considerations similar to those of software systems must be managed. There needs to be a mechanism for discovery enabling applications to locate and utilize the available resources. Also, application interfaces are needed to provide for both configuring the resources as well as transferring data between the application and the reconfigurable hardware. Each of these topics are explored in the context of deploying reconfigurable resources as an integral aspect of the lunar exploration architecture.

  6. 37 CFR 1.154 - Arrangement of application elements in a design application.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... elements in a design application. 1.154 Section 1.154 Patents, Trademarks, and Copyrights UNITED STATES... Processing Provisions Design Patents § 1.154 Arrangement of application elements in a design application. (a) The elements of the design application, if applicable, should appear in the following order:...

  7. 21 CFR 314.150 - Withdrawal of approval of an application or abbreviated application.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 5 2013-04-01 2013-04-01 false Withdrawal of approval of an application or abbreviated application. 314.150 Section 314.150 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... application or abbreviated application. (a) The Food and Drug Administration will notify the applicant,...

  8. 29 CFR 1926.1050 - Scope, application, and definitions applicable to this subpart.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CONSTRUCTION Stairways and Ladders § 1926.1050 Scope, application, and definitions applicable to this subpart. (a) Scope and application. This subpart applies to all stairways and ladders used in construction... 29 Labor 8 2011-07-01 2011-07-01 false Scope, application, and definitions applicable to...

  9. 37 CFR 1.154 - Arrangement of application elements in a design application.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... elements in a design application. 1.154 Section 1.154 Patents, Trademarks, and Copyrights UNITED STATES... Processing Provisions Design Patents § 1.154 Arrangement of application elements in a design application. (a) The elements of the design application, if applicable, should appear in the following order:...

  10. 37 CFR 1.154 - Arrangement of application elements in a design application.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... elements in a design application. 1.154 Section 1.154 Patents, Trademarks, and Copyrights UNITED STATES... Processing Provisions Design Patents § 1.154 Arrangement of application elements in a design application. (a) The elements of the design application, if applicable, should appear in the following order:...

  11. 21 CFR 314.101 - Filing an application and receiving an abbreviated new drug application.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS FOR HUMAN USE APPLICATIONS FOR FDA APPROVAL TO MARKET A NEW DRUG FDA Action on Applications and Abbreviated Applications § 314.101 Filing an application and receiving an abbreviated new drug application. (a)(1) Within 60 days after FDA receives...

  12. 21 CFR 314.100 - Timeframes for reviewing applications and abbreviated applications.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS FOR HUMAN USE APPLICATIONS FOR FDA APPROVAL TO MARKET A NEW DRUG FDA Action on Applications and Abbreviated Applications § 314.100 Timeframes for reviewing... application for a new drug under section 505(j) of the act, FDA will review it and send the applicant...

  13. Virtualizing access to scientific applications with the Application Hosting Environment

    NASA Astrophysics Data System (ADS)

    Zasada, S. J.; Coveney, P. V.

    2009-12-01

    The growing power and number of high performance computing resources made available through computational grids present major opportunities as well as a number of challenges to the user. At issue is how these resources can be accessed and how their power can be effectively exploited. In this paper we first present our views on the usability of contemporary high-performance computational resources. We introduce the concept of grid application virtualization as a solution to some of the problems with grid-based HPC usability. We then describe a middleware tool that we have developed to realize the virtualization of grid applications, the Application Hosting Environment (AHE), and describe the features of the new release, AHE 2.0, which provides access to a common platform of federated computational grid resources in standard and non-standard ways. Finally, we describe a case study showing how AHE supports clinical use of whole brain blood flow modelling in a routine and automated fashion. Program summaryProgram title: Application Hosting Environment 2.0 Catalogue identifier: AEEJ_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEJ_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU Public Licence, Version 2 No. of lines in distributed program, including test data, etc.: not applicable No. of bytes in distributed program, including test data, etc.: 1 685 603 766 Distribution format: tar.gz Programming language: Perl (server), Java (Client) Computer: x86 Operating system: Linux (Server), Linux/Windows/MacOS (Client) RAM: 134 217 728 (server), 67 108 864 (client) bytes Classification: 6.5 External routines: VirtualBox (server), Java (client) Nature of problem: The middleware that makes grid computing possible has been found by many users to be too unwieldy, and presents an obstacle to use rather than providing assistance [1,2]. Such problems are compounded when one attempts to harness the

  14. NASA technology applications team. Applications of aerospace technology

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Discussed here are the activities of the Research Triangle Institute (RTI) Technology Applications Team for the period 1 October 1990 through 30 September 1991. Topics researched include automated data acquisition and analysis of highway pavement cracking, thermal insulation for refrigerators, the containment of paint removed from steel structures, improved technologies for Kuwait oil well control, sprayed zinc coatings for corrosion control of reinforcing steel in bridges, and the monitoring and life support of medically fragile children in the educational setting.

  15. NASA technology applications team: Applications of aerospace technology

    NASA Technical Reports Server (NTRS)

    1993-01-01

    This report covers the activities of the Research Triangle Institute (RTI) Technology Applications Team for the period 1 October 1992 through 30 September 1993. The work reported herein was supported by the National Aeronautics and Space Administration (NASA), Contract No. NASW-4367. Highlights of the RTI Applications Team activities over the past year are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. Appendix B includes Technology Opportunity Announcements and Spinoff! Sheets prepared by the Team while Appendix C contains a series of technology transfer articles prepared by the Team.

  16. Applicability check of ZnO crystals for device applications

    NASA Astrophysics Data System (ADS)

    Bhowmick, Mithun; Ullrich, Bruno; Ariza, David; Xi, Haowen

    2014-03-01

    There has always been vital interest in wide-band gap semiconductors for their applicability in short-wavelength photonic devices and in electronic devices operating in high frequency regime. Historically, ZnO was never favored as a potential material for the above applications primarily because of difficulty in growing it. This situation, however, has improved drastically in the past decade thereby renewing the attention on this material system. Hence, ZnO is being proposed for potential light emitting devices in the blue and UV regions of electromagnetic spectrum. ZnO single crystals are also being considered for high power transistors. In this work, we present investigations of optical properties of pure (99.99%) ZnO performing transmittance, reflectance, Raman, and photoluminescence measurements. The ZnO single crystals employed in this work, were obtained commercially. We present detailed analysis of the measured data through theoretical calculations. Our results identify the state-of-the-art application potential of commercially available ZnO, revealing its advantages and limitations when compared to similar materials such as GaN.

  17. NASA technology applications team: Applications of aerospace technology

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Two critical aspects of the Applications Engineering Program were especially successful: commercializing products of Application Projects; and leveraging NASA funds for projects by developing cofunding from industry and other agencies. Results are presented in the following areas: the excimer laser was commercialized for clearing plaque in the arteries of patients with coronary artery disease; the ultrasound burn depth analysis technology is to be licensed and commercialized; a phased commercialization plan was submitted to NASA for the intracranial pressure monitor; the Flexible Agricultural Robotics Manipulator System (FARMS) is making progress in the development of sensors and a customized end effector for a roboticized greenhouse operation; a dual robot are controller was improved; a multisensor urodynamic pressure catherer was successful in clinical tests; commercial applications were examined for diamond like carbon coatings; further work was done on the multichannel flow cytometer; progress on the liquid airpack for fire fighters; a wind energy conversion device was tested in a low speed wind tunnel; and the Space Shuttle Thermal Protection System was reviewed.

  18. 37 CFR 1.53 - Application number, filing date, and completion of application.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... requirements of §§ 1.821 through 1.825 regarding application disclosures containing nucleotide and/or amino acid sequences are not mandatory for provisional applications. (d) Application filing...

  19. 47 CFR 73.5002 - Application and certification procedures; return of mutually exclusive applications not subject...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...; return of mutually exclusive applications not subject to competitive bidding procedures; prohibition of... RADIO SERVICES RADIO BROADCAST SERVICES Procedures for Competitive Bidding and for Applications for... procedures; return of mutually exclusive applications not subject to competitive bidding...

  20. 47 CFR 73.5002 - Application and certification procedures; return of mutually exclusive applications not subject...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...; return of mutually exclusive applications not subject to competitive bidding procedures; prohibition of... RADIO SERVICES RADIO BROADCAST SERVICES Procedures for Competitive Bidding and for Applications for... procedures; return of mutually exclusive applications not subject to competitive bidding...

  1. Adaptive control with aerospace applications

    NASA Astrophysics Data System (ADS)

    Gadient, Ross

    Robust and adaptive control techniques have a rich history of theoretical development with successful application. Despite the accomplishments made, attempts to combine the best elements of each approach into robust adaptive systems has proven challenging, particularly in the area of application to real world aerospace systems. In this research, we investigate design methods for general classes of systems that may be applied to representative aerospace dynamics. By combining robust baseline control design with augmentation designs, our work aims to leverage the advantages of each approach. This research contributes the development of robust model-based control design for two classes of dynamics: 2nd order cascaded systems, and a more general MIMO framework. We present a theoretically justified method for state limiting via augmentation of a robust baseline control design. Through the development of adaptive augmentation designs, we are able to retain system performance in the presence of uncertainties. We include an extension that combines robust baseline design with both state limiting and adaptive augmentations. In addition we develop an adaptive augmentation design approach for a class of dynamic input uncertainties. We present formal stability proofs and analyses for all proposed designs in the research. Throughout the work, we present real world aerospace applications using relevant flight dynamics and flight test results. We derive robust baseline control designs with application to both piloted and unpiloted aerospace system. Using our developed methods, we add a flight envelope protecting state limiting augmentation for piloted aircraft applications and demonstrate the efficacy of our approach via both simulation and flight test. We illustrate our adaptive augmentation designs via application to relevant fixed-wing aircraft dynamics. Both a piloted example combining the state limiting and adaptive augmentation approaches, and an unpiloted example with

  2. Iris: The VAO SED Application

    NASA Astrophysics Data System (ADS)

    Doe, S.; Bonaventura, N.; Busko, I.; D'Abrusco, R.; Cresitello-Dittmar, M.; Ebert, R.; Evans, J.; Laurino, O.; McDowell, J.; Pevunova, O.; Refsdal, B.

    2012-09-01

    We present Iris, the VAO (Virtual Astronomical Observatory) application for analyzing SEDs (spectral energy distributions). Iris is the result of one of the major science initiatives of the VAO, and the first version was released in September 2011. Iris seamlessly combines key features of several existing astronomical software applications to streamline and enhance the SED analysis process. With Iris, users may read in and display SEDs, select data ranges for analysis, fit models to SEDs, and calculate confidence limits on best-fit parameters. SED data may be uploaded into the application from IVOA-compliant VOTable and FITS format files, or retrieved directly from NED (the NASA/IPAC Extragalactic Database). Data written in unsupported formats may be converted for upload using SedImporter, a new application provided with the package. The components of Iris have been contributed by members of the VAO. Specview, contributed by STScI (the Space Telescope Science Institute), provides a GUI for reading, editing, and displaying SEDs, as well as defining model expressions and setting initial model parameter values. Sherpa, contributed by the Chandra project at SAO (the Smithsonian Astrophysical Observatory), provides a library of models, fit statistics, and optimization methods for analyzing SEDs; the underlying I/O library, SEDLib, is a VAO product written by SAO to current IVOA (International Virtual Observatory Alliance) data model standards. NED is a service provided by IPAC (the Infrared Processing and Analysis Center) at Caltech for easy location of data for a given extragalactic astronomical source, including SEDs. SedImporter is a new tool for converting non-standard SED data files into a format supported by Iris. We demonstrate the use of SedImporter to retrieve SEDs from a variety of sources-from the NED SED service, from the user's own data, and from other VO applications using SAMP (Simple Application Messaging Protocol). We also demonstrate the use of Iris to

  3. Applications of bulk high-temperature superconductors

    NASA Astrophysics Data System (ADS)

    Hull, J. R.

    The development of high-temperature superconductors (HTS's) can be broadly generalized into thin-film electronics, wire applications, and bulk applications. We consider bulk HTS's to include sintered or crystallized forms that do not take the geometry of filaments or tapes, and we discuss major applications for these materials. For the most part applications may be realized with the HTS's cooled to 77 K, and the properties of the bulk HTS's are often already sufficient for commercial use. A non-exhaustive list of applications for bulk HTS's includes trapped field magnets, hysteresis motors, magnetic shielding, current leads, and magnetic bearings. These applications are briefly discussed in this paper.

  4. Network susceptibilities: Theory and applications.

    PubMed

    Manik, Debsankha; Rohden, Martin; Ronellenfitsch, Henrik; Zhang, Xiaozhu; Hallerberg, Sarah; Witthaut, Dirk; Timme, Marc

    2017-01-01

    We introduce the concept of network susceptibilities quantifying the response of the collective dynamics of a network to small parameter changes. We distinguish two types of susceptibilities: vertex susceptibilities and edge susceptibilities, measuring the responses due to changes in the properties of units and their interactions, respectively. We derive explicit forms of network susceptibilities for oscillator networks close to steady states and offer example applications for Kuramoto-type phase-oscillator models, power grid models, and generic flow models. Focusing on the role of the network topology implies that these ideas can be easily generalized to other types of networks, in particular those characterizing flow, transport, or spreading phenomena. The concept of network susceptibilities is broadly applicable and may straightforwardly be transferred to all settings where networks responses of the collective dynamics to topological changes are essential.

  5. Radiation applications of physical chemistry

    NASA Astrophysics Data System (ADS)

    Talrose, V. L.

    1991-05-01

    Many chemical energy problems have a physical chemistry nature connected with chemical kinetics and thermodynamics. In the USSR, the development in this field is associated with the name of N. N. Semenov, who was involved in a large number of fundamental and applied physical chemistry problems. The new Institute of Energy Problems of Chemical Physics of the USSR Academy of Sciences is dealing with some of them. An overview of the Institute's work on radiation applications is presented. Examples of the use of radiation in the power industry (e.g., in coal gasification), tire production, mechanical joints, metal powder production, and sterilization of pharmaceutical products are given. Methods and problems involved in these applications are discussed and the great potential for extensive utilization is demonstrated.

  6. Lattice Structures For Aerospace Applications

    NASA Astrophysics Data System (ADS)

    Del Olmo, E.; Grande, E.; Samartin, C. R.; Bezdenejnykh, M.; Torres, J.; Blanco, N.; Frovel, M.; Canas, J.

    2012-07-01

    The way of mass reduction improving performances in the aerospace structures is a constant and relevant challenge in the space business. The designs, materials and manufacturing processes are permanently in evolution to explore and get mass optimization solutions at low cost. In the framework of ICARO project, EADS CASA ESPACIO (ECE) has designed, manufactured and tested a technology demonstrator which shows that lattice type of grid structures is a promising weight saving solution for replacing some traditional metallic and composite structures for space applications. A virtual testing methodology was used in order to support the design of a high modulus CFRP cylindrical lattice technology demonstrator. The manufacturing process, based on composite Automatic Fiber Placement (AFP) technology developed by ECE, allows obtaining high quality low weight lattice structures potentially applicable to a wide range of aerospace structures. Launcher payload adaptors, satellite platforms, antenna towers or instrument supports are some promising candidates.

  7. Cascade Chaotic System With Applications.

    PubMed

    Zhou, Yicong; Hua, Zhongyun; Pun, Chi-Man; Chen, C L Philip

    2015-09-01

    Chaotic maps are widely used in different applications. Motivated by the cascade structure in electronic circuits, this paper introduces a general chaotic framework called the cascade chaotic system (CCS). Using two 1-D chaotic maps as seed maps, CCS is able to generate a huge number of new chaotic maps. Examples and evaluations show the CCS's robustness. Compared with corresponding seed maps, newly generated chaotic maps are more unpredictable and have better chaotic performance, more parameters, and complex chaotic properties. To investigate applications of CCS, we introduce a pseudo-random number generator (PRNG) and a data encryption system using a chaotic map generated by CCS. Simulation and analysis demonstrate that the proposed PRNG has high quality of randomness and that the data encryption system is able to protect different types of data with a high-security level.

  8. Transonic CFD applications at Boeing

    NASA Technical Reports Server (NTRS)

    Tinoco, E. N.

    1989-01-01

    The use of computational methods for three dimensional transonic flow design and analysis at the Boeing Company is presented. A range of computational tools consisting of production tools for every day use by project engineers, expert user tools for special applications by computational researchers, and an emerging tool which may see considerable use in the near future are described. These methods include full potential and Euler solvers, some coupled to three dimensional boundary layer analysis methods, for transonic flow analysis about nacelle, wing-body, wing-body-strut-nacelle, and complete aircraft configurations. As the examples presented show, such a toolbox of codes is necessary for the variety of applications typical of an industrial environment. Such a toolbox of codes makes possible aerodynamic advances not previously achievable in a timely manner, if at all.

  9. Drum inspection robots: Application development

    SciTech Connect

    Hazen, F.B.; Warner, R.D.

    1996-02-01

    Throughout the Department of Energy (DOE), drums containing mixed and low level stored waste are inspected, as mandated by the Resource Conservation and Recovery Act (RCRA) and other regulations. The inspections are intended to prevent leaks by finding corrosion long before the drums are breached. The DOE Office of Science and Technology (OST) has sponsored efforts towards the development of robotic drum inspectors. This emerging application for mobile and remote sensing has broad applicability for DOE and commercial waste storage areas. Three full scale robot prototypes have been under development, and another project has prototyped a novel technique to analyze robotically collected drum images. In general, the robots consist of a mobile, self-navigating base vehicle, outfitted with sensor packages so that rust and other corrosion cues can be automatically identified. They promise the potential to lower radiation dose and operator effort required, while improving diligence, consistency, and documentation.

  10. Laser sources for lidar applications

    NASA Astrophysics Data System (ADS)

    Kilmer, J.; Iadevaia, A.; Yin, Y.

    2012-06-01

    Advanced LIDAR applications such as next gen: Micro Pulse; Time of Flight (e.g., Satellite Laser Ranging); Coherent and Incoherent Doppler (e.g., Wind LIDAR); High Spectral Resolution; Differential Absorption (DIAL); photon counting LIDAR (e.g., 3D LIDAR); are placing more demanding requirements on conventional lasers (e.g., increased rep rates, etc.) and have inspired the development of new types of laser sources. Today, solid state lasers are used for wind sensing, 2D laser Radar, 3D scanning and flash LIDAR. In this paper, we report on the development of compact, highly efficient, high power all-solidstate diode pulsed pumped ns lasers, as well as, high average power/high pulse energy sub nanosecond (<1ns) and picosecond (<100ps) lasers for these next gen LIDAR applications.

  11. Network susceptibilities: Theory and applications

    NASA Astrophysics Data System (ADS)

    Manik, Debsankha; Rohden, Martin; Ronellenfitsch, Henrik; Zhang, Xiaozhu; Hallerberg, Sarah; Witthaut, Dirk; Timme, Marc

    2017-01-01

    We introduce the concept of network susceptibilities quantifying the response of the collective dynamics of a network to small parameter changes. We distinguish two types of susceptibilities: vertex susceptibilities and edge susceptibilities, measuring the responses due to changes in the properties of units and their interactions, respectively. We derive explicit forms of network susceptibilities for oscillator networks close to steady states and offer example applications for Kuramoto-type phase-oscillator models, power grid models, and generic flow models. Focusing on the role of the network topology implies that these ideas can be easily generalized to other types of networks, in particular those characterizing flow, transport, or spreading phenomena. The concept of network susceptibilities is broadly applicable and may straightforwardly be transferred to all settings where networks responses of the collective dynamics to topological changes are essential.

  12. Artificial intelligence: Principles and applications

    SciTech Connect

    Yazdami, M.

    1985-01-01

    The book covers the principles of AI, the main areas of application, as well as considering some of the social implications. The applications chapters have a common format structured as follows: definition of the topic; approach with conventional computing techniques; why 'intelligence' would provide a better approach; and how AI techniques would be used and the limitations. The contents discussed are: Principles of artificial intelligence; AI programming environments; LISP, list processing and pattern-making; AI programming with POP-11; Computer processing of natural language; Speech synthesis and recognition; Computer vision; Artificial intelligence and robotics; The anatomy of expert systems - Forsyth; Machine learning; Memory models of man and machine; Artificial intelligence and cognitive psychology; Breaking out of the chinese room; Social implications of artificial intelligence; and Index.

  13. Wavelet theory and its applications

    SciTech Connect

    Faber, V.; Bradley, JJ.; Brislawn, C.; Dougherty, R.; Hawrylycz, M.

    1996-07-01

    This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). We investigated the theory of wavelet transforms and their relation to Laboratory applications. The investigators have had considerable success in the past applying wavelet techniques to the numerical solution of optimal control problems for distributed- parameter systems, nonlinear signal estimation, and compression of digital imagery and multidimensional data. Wavelet theory involves ideas from the fields of harmonic analysis, numerical linear algebra, digital signal processing, approximation theory, and numerical analysis, and the new computational tools arising from wavelet theory are proving to be ideal for many Laboratory applications. 10 refs.

  14. Homeland Security and Defense Applications

    SciTech Connect

    2014-11-06

    Homeland Security and Defense Applications personnel are the best in the world at detecting and locating dirty bombs, loose nukes, and other radiological sources. The site trains the Nation's emergency responders, who would be among the first to confront a radiological or nuclear emergency. Homeland Security and Defense Applications highly training personnel, characterize the threat environment, produce specialized radiological nuclear detection equipment, train personnel on the equipment and its uses, test and evaluate the equipment, and develop different kinds of high-tech equipment to defeat terrorists. In New York City for example, NNSS scientists assisted in characterizing the radiological nuclear environment after 9/11, and produced specialized radiological nuclear equipment to assist local officials in their Homeland Security efforts.

  15. Phosphorene: from theory to applications

    NASA Astrophysics Data System (ADS)

    Carvalho, Alexandra; Wang, Min; Zhu, Xi; Rodin, Aleksandr S.; Su, Haibin; Castro Neto, Antonio H.

    2016-11-01

    2D materials are the focus of an intense research effort because of their unique properties and their potential for revealing intriguing new phenomena. Phosphorene, a monolayer of black phosphorus, earned its place among the family of 2D semiconductor materials when recent results unveiled its high carrier mobility, high optical and UV absorption, and other attractive properties, which are of particular interest for optoelectronic applications. Unlike graphene, phosphorene has an anisotropic orthorhombic structure that is ductile along one of the in-plane crystal directions but stiff along the other. This results in unusual mechanical, electronic, optical and transport properties that reflect the anisotropy of the lattice. This Review summarizes the physical properties of phosphorene and highlights the recent progress made in the preparation, isolation and characterization of this material. The role of defects and doping is discussed, and phosphorene-based devices are surveyed; finally, the remaining challenges and potential applications of phosphorene are outlined.

  16. Nanocomposite hydrogels for biomedical applications

    PubMed Central

    Gaharwar, Akhilesh K.

    2014-01-01

    Hydrogels mimic native tissue microenvironment due to their porous and hydrated molecular structure. An emerging approach to reinforce polymeric hydrogels and to include multiple functionalities focuses on incorporating nanoparticles within the hydrogel network. A wide range of nanoparticles, such as carbon-based, polymeric, ceramic, and metallic nanomaterials can be integrated within the hydrogel networks to obtain nanocomposites with superior properties and tailored functionality. Nanocomposite hydrogels can be engineered to possess superior physical, chemical, electrical, and biological properties. This review focuses on the most recent developments in the field of nanocomposite hydrogels with emphasis on biomedical and pharmaceutical applications. In particular, we discuss synthesis and fabrication of nanocomposite hydrogels, examine their current limitations and conclude with future directions in designing more advanced nanocomposite hydrogels for biomedical and biotechnological applications. PMID:24264728

  17. Clinical applications of doppler ultrasound

    SciTech Connect

    Taylor, K.J.W.; Burns, P.N.; Well, P.N.T.

    1987-01-01

    This book introduces a guide to the physical principles and instrumentation of duplex Doppler ultrasound and its applications in obstetrics, gynecology, neonatology, gastroentology, and evaluation of peripheral vascular disease. The book provides information needed to perform Doppler ultrasound examinations and interpret the results. An introduction to Doppler physics and instrumentation is followed by a thorough review of hemodynamics, which explains the principles underlying interpretation of Doppler signals. Of special note is the state-of-the-art coverage of new applications of Doppler in recognition of high-risk pregnancy, diagnosis of intrauterine growth retardation, investigation of neonatal blood flow, evaluation of first-trimester pregnancy, and diagnosis of gastrointestinal disease. The book also offers guidelines on the use of Doppler ultrasound in diagnosing carotid disease, deep venous thrombosis, and aorta/femoral disease.

  18. Clinical applications of computerized thermography

    NASA Technical Reports Server (NTRS)

    Anbar, Michael

    1988-01-01

    Computerized or digital, thermography is a rapidly growing diagnostic imaging modality. It has superseded contact thermography and analog imaging thermography which do not allow effective quantization. Medical applications of digital thermography can be classified in two groups: static and dynamic imaging. They can also be classified into macro thermography (resolution greater than 1 mm) and micro thermography (resolution less than 100 microns). Both modalities allow a thermal resolution of 0.1 C. The diagnostic power of images produced by any of these modalities can be augmented by the use of digital image enhancement and image recognition procedures. Computerized thermography has been applied in neurology, cardiovascular and plastic surgery, rehabilitation and sports medicine, psychiatry, dermatology and ophthalmology. Examples of these applications are shown and their scope and limitations are discussed.

  19. Cloud Computing Technologies and Applications

    NASA Astrophysics Data System (ADS)

    Zhu, Jinzy

    In a nutshell, the existing Internet provides to us content in the forms of videos, emails and information served up in web pages. With Cloud Computing, the next generation of Internet will allow us to "buy" IT services from a web portal, drastic expanding the types of merchandise available beyond those on e-commerce sites such as eBay and Taobao. We would be able to rent from a virtual storefront the basic necessities to build a virtual data center: such as CPU, memory, storage, and add on top of that the middleware necessary: web application servers, databases, enterprise server bus, etc. as the platform(s) to support the applications we would like to either rent from an Independent Software Vendor (ISV) or develop ourselves. Together this is what we call as "IT as a Service," or ITaaS, bundled to us the end users as a virtual data center.

  20. Distance majorization and its applications.

    PubMed

    Chi, Eric C; Zhou, Hua; Lange, Kenneth

    2014-08-01

    The problem of minimizing a continuously differentiable convex function over an intersection of closed convex sets is ubiquitous in applied mathematics. It is particularly interesting when it is easy to project onto each separate set, but nontrivial to project onto their intersection. Algorithms based on Newton's method such as the interior point method are viable for small to medium-scale problems. However, modern applications in statistics, engineering, and machine learning are posing problems with potentially tens of thousands of parameters or more. We revisit this convex programming problem and propose an algorithm that scales well with dimensionality. Our proposal is an instance of a sequential unconstrained minimization technique and revolves around three ideas: the majorization-minimization principle, the classical penalty method for constrained optimization, and quasi-Newton acceleration of fixed-point algorithms. The performance of our distance majorization algorithms is illustrated in several applications.