International Data Archive and Analysis Center. I. International Relations Archive. II. Voluntary International Coordination. III. Attachments.

ERIC Educational Resources Information Center

Miller, Warren; Tanter, Raymond

The International Relations Archive undertakes as its primary goals the acquisition, management and dissemination of international affairs data. The first document enclosed is a copy of the final machine readable codebook prepared for the data from the Political Events Project, 1948-1965. Also included is a copy of the final machine-readable…

A VLSI chip set for real time vector quantization of image sequences

NASA Technical Reports Server (NTRS)

Baker, Richard L.

1989-01-01

The architecture and implementation of a VLSI chip set that vector quantizes (VQ) image sequences in real time is described. The chip set forms a programmable Single-Instruction, Multiple-Data (SIMD) machine which can implement various vector quantization encoding structures. Its VQ codebook may contain unlimited number of codevectors, N, having dimension up to K = 64. Under a weighted least squared error criterion, the engine locates at video rates the best code vector in full-searched or large tree searched VQ codebooks. The ability to manipulate tree structured codebooks, coupled with parallelism and pipelining, permits searches in as short as O (log N) cycles. A full codebook search results in O(N) performance, compared to O(KN) for a Single-Instruction, Single-Data (SISD) machine. With this VLSI chip set, an entire video code can be built on a single board that permits realtime experimentation with very large codebooks.

Developing Codebooks as a New Tool to Analyze Students' ePortfolios

ERIC Educational Resources Information Center

Impedovo, Maria Antonietta; Ritella, Giuseppe; Ligorio, Maria Beatrice

2013-01-01

This paper describes a three-step method for the construction of codebooks meant for analyzing ePortfolio content. The first step produces a prototype based on qualitative analysis of very different ePortfolios from the same course. During the second step, the initial version of the codebook is tested on a larger sample and subsequently revised.…

Electronic Codebooks for Windows 95/98: 22 ECBs. Electronic Codebook (ECB) Updates for Previously Released Data Files. [CD-ROM].

ERIC Educational Resources Information Center

National Center for Education Statistics (ED), Washington, DC.

This CD-ROM contains a separate electronic codebook for each of the following National Center for Education Statistics data sets: (1) B94, Baccalaureate and Beyond 1993-94 (restricted); (2) B97, Baccalaureate and Beyond 1993-97 (restricted); (3) BP4, Beginning Postsecondary Students 1990-94 (restricted); (4) FAC, 1992-93 National Student of…

Enhancing speech recognition using improved particle swarm optimization based hidden Markov model.

PubMed

Selvaraj, Lokesh; Ganesan, Balakrishnan

2014-01-01

Enhancing speech recognition is the primary intention of this work. In this paper a novel speech recognition method based on vector quantization and improved particle swarm optimization (IPSO) is suggested. The suggested methodology contains four stages, namely, (i) denoising, (ii) feature mining (iii), vector quantization, and (iv) IPSO based hidden Markov model (HMM) technique (IP-HMM). At first, the speech signals are denoised using median filter. Next, characteristics such as peak, pitch spectrum, Mel frequency Cepstral coefficients (MFCC), mean, standard deviation, and minimum and maximum of the signal are extorted from the denoised signal. Following that, to accomplish the training process, the extracted characteristics are given to genetic algorithm based codebook generation in vector quantization. The initial populations are created by selecting random code vectors from the training set for the codebooks for the genetic algorithm process and IP-HMM helps in doing the recognition. At this point the creativeness will be done in terms of one of the genetic operation crossovers. The proposed speech recognition technique offers 97.14% accuracy.

Ice Shape Characterization Using Self-Organizing Maps

NASA Technical Reports Server (NTRS)

McClain, Stephen T.; Tino, Peter; Kreeger, Richard E.

2011-01-01

A method for characterizing ice shapes using a self-organizing map (SOM) technique is presented. Self-organizing maps are neural-network techniques for representing noisy, multi-dimensional data aligned along a lower-dimensional and possibly nonlinear manifold. For a large set of noisy data, each element of a finite set of codebook vectors is iteratively moved in the direction of the data closest to the winner codebook vector. Through successive iterations, the codebook vectors begin to align with the trends of the higher-dimensional data. In information processing, the intent of SOM methods is to transmit the codebook vectors, which contains far fewer elements and requires much less memory or bandwidth, than the original noisy data set. When applied to airfoil ice accretion shapes, the properties of the codebook vectors and the statistical nature of the SOM methods allows for a quantitative comparison of experimentally measured mean or average ice shapes to ice shapes predicted using computer codes such as LEWICE. The nature of the codebook vectors also enables grid generation and surface roughness descriptions for use with the discrete-element roughness approach. In the present study, SOM characterizations are applied to a rime ice shape, a glaze ice shape at an angle of attack, a bi-modal glaze ice shape, and a multi-horn glaze ice shape. Improvements and future explorations will be discussed.

High-performance ultra-low power VLSI analog processor for data compression

NASA Technical Reports Server (NTRS)

Tawel, Raoul (Inventor)

1996-01-01

An apparatus for data compression employing a parallel analog processor. The apparatus includes an array of processor cells with N columns and M rows wherein the processor cells have an input device, memory device, and processor device. The input device is used for inputting a series of input vectors. Each input vector is simultaneously input into each column of the array of processor cells in a pre-determined sequential order. An input vector is made up of M components, ones of which are input into ones of M processor cells making up a column of the array. The memory device is used for providing ones of M components of a codebook vector to ones of the processor cells making up a column of the array. A different codebook vector is provided to each of the N columns of the array. The processor device is used for simultaneously comparing the components of each input vector to corresponding components of each codebook vector, and for outputting a signal representative of the closeness between the compared vector components. A combination device is used to combine the signal output from each processor cell in each column of the array and to output a combined signal. A closeness determination device is then used for determining which codebook vector is closest to an input vector from the combined signals, and for outputting a codebook vector index indicating which of the N codebook vectors was the closest to each input vector input into the array.

Reflective Course Construction: An Analysis of Student Feedback and Its Role in Curricular Design

ERIC Educational Resources Information Center

Mitchell, Erik

2013-01-01

This study uses formal and informal student feedback as a source for understanding the impact of experimental course elements. Responses were used to develop a codebook, which was then applied to the entire dataset. The results inform our understanding of student's conceptions of professional identity, learning styles and curriculum design.…

Musical sound analysis/synthesis using vector-quantized time-varying spectra

NASA Astrophysics Data System (ADS)

Ehmann, Andreas F.; Beauchamp, James W.

2002-11-01

A fundamental goal of computer music sound synthesis is accurate, yet efficient resynthesis of musical sounds, with the possibility of extending the synthesis into new territories using control of perceptually intuitive parameters. A data clustering technique known as vector quantization (VQ) is used to extract a globally optimum set of representative spectra from phase vocoder analyses of instrument tones. This set of spectra, called a Codebook, is used for sinusoidal additive synthesis or, more efficiently, for wavetable synthesis. Instantaneous spectra are synthesized by first determining the Codebook indices corresponding to the best least-squares matches to the original time-varying spectrum. Spectral index versus time functions are then smoothed, and interpolation is employed to provide smooth transitions between Codebook spectra. Furthermore, spectral frames are pre-flattened and their slope, or tilt, extracted before clustering is applied. This allows spectral tilt, closely related to the perceptual parameter ''brightness,'' to be independently controlled during synthesis. The result is a highly compressed format consisting of the Codebook spectra and time-varying tilt, amplitude, and Codebook index parameters. This technique has been applied to a variety of harmonic musical instrument sounds with the resulting resynthesized tones providing good matches to the originals.

The Introductory Sociology Survey

ERIC Educational Resources Information Center

Best, Joel

1977-01-01

The Introductory Sociology Survey (ISS) is designed to teach introductory students basic skills in developing causal arguments and in using a computerized statistical package to analyze survey data. Students are given codebooks for survey data and asked to write a brief paper predicting the relationship between at least two variables. (Author)

Key Themes in Mobile Learning: Prospects for Learner-Generated Learning through AR and VR

ERIC Educational Resources Information Center

Aguayo, Claudio; Cochrane, Thomas; Narayan, Vickel

2017-01-01

This paper summarises the findings from a literature review in mobile learning, developed as part of a 2-year six-institution project in New Zealand. Through the development of a key themes codebook, we address selected key themes with respect to their relevance to learner-generated learning through emerging technologies, with attention to mobile…

Pipeline synthetic aperture radar data compression utilizing systolic binary tree-searched architecture for vector quantization

NASA Technical Reports Server (NTRS)

Chang, Chi-Yung (Inventor); Fang, Wai-Chi (Inventor); Curlander, John C. (Inventor)

1995-01-01

A system for data compression utilizing systolic array architecture for Vector Quantization (VQ) is disclosed for both full-searched and tree-searched. For a tree-searched VQ, the special case of a Binary Tree-Search VQ (BTSVQ) is disclosed with identical Processing Elements (PE) in the array for both a Raw-Codebook VQ (RCVQ) and a Difference-Codebook VQ (DCVQ) algorithm. A fault tolerant system is disclosed which allows a PE that has developed a fault to be bypassed in the array and replaced by a spare at the end of the array, with codebook memory assignment shifted one PE past the faulty PE of the array.

A novel unsupervised spike sorting algorithm for intracranial EEG.

PubMed

Yadav, R; Shah, A K; Loeb, J A; Swamy, M N S; Agarwal, R

2011-01-01

This paper presents a novel, unsupervised spike classification algorithm for intracranial EEG. The method combines template matching and principal component analysis (PCA) for building a dynamic patient-specific codebook without a priori knowledge of the spike waveforms. The problem of misclassification due to overlapping classes is resolved by identifying similar classes in the codebook using hierarchical clustering. Cluster quality is visually assessed by projecting inter- and intra-clusters onto a 3D plot. Intracranial EEG from 5 patients was utilized to optimize the algorithm. The resulting codebook retains 82.1% of the detected spikes in non-overlapping and disjoint clusters. Initial results suggest a definite role of this method for both rapid review and quantitation of interictal spikes that could enhance both clinical treatment and research studies on epileptic patients.

Signal Prediction With Input Identification

NASA Technical Reports Server (NTRS)

Juang, Jer-Nan; Chen, Ya-Chin

1999-01-01

A novel coding technique is presented for signal prediction with applications including speech coding, system identification, and estimation of input excitation. The approach is based on the blind equalization method for speech signal processing in conjunction with the geometric subspace projection theory to formulate the basic prediction equation. The speech-coding problem is often divided into two parts, a linear prediction model and excitation input. The parameter coefficients of the linear predictor and the input excitation are solved simultaneously and recursively by a conventional recursive least-squares algorithm. The excitation input is computed by coding all possible outcomes into a binary codebook. The coefficients of the linear predictor and excitation, and the index of the codebook can then be used to represent the signal. In addition, a variable-frame concept is proposed to block the same excitation signal in sequence in order to reduce the storage size and increase the transmission rate. The results of this work can be easily extended to the problem of disturbance identification. The basic principles are outlined in this report and differences from other existing methods are discussed. Simulations are included to demonstrate the proposed method.

Vector Sum Excited Linear Prediction (VSELP) speech coding at 4.8 kbps

NASA Technical Reports Server (NTRS)

Gerson, Ira A.; Jasiuk, Mark A.

1990-01-01

Code Excited Linear Prediction (CELP) speech coders exhibit good performance at data rates as low as 4800 bps. The major drawback to CELP type coders is their larger computational requirements. The Vector Sum Excited Linear Prediction (VSELP) speech coder utilizes a codebook with a structure which allows for a very efficient search procedure. Other advantages of the VSELP codebook structure is discussed and a detailed description of a 4.8 kbps VSELP coder is given. This coder is an improved version of the VSELP algorithm, which finished first in the NSA's evaluation of the 4.8 kbps speech coders. The coder uses a subsample resolution single tap long term predictor, a single VSELP excitation codebook, a novel gain quantizer which is robust to channel errors, and a new adaptive pre/postfilter arrangement.

Unsupervised categorization method of graphemes on handwritten manuscripts: application to style recognition

NASA Astrophysics Data System (ADS)

Daher, H.; Gaceb, D.; Eglin, V.; Bres, S.; Vincent, N.

2012-01-01

We present in this paper a feature selection and weighting method for medieval handwriting images that relies on codebooks of shapes of small strokes of characters (graphemes that are issued from the decomposition of manuscripts). These codebooks are important to simplify the automation of the analysis, the manuscripts transcription and the recognition of styles or writers. Our approach provides a precise features weighting by genetic algorithms and a highperformance methodology for the categorization of the shapes of graphemes by using graph coloring into codebooks which are applied in turn on CBIR (Content Based Image Retrieval) in a mixed handwriting database containing different pages from different writers, periods of the history and quality. We show how the coupling of these two mechanisms 'features weighting - graphemes classification' can offer a better separation of the forms to be categorized by exploiting their grapho-morphological, their density and their significant orientations particularities.

Applying the WHO conceptual framework for the International Classification for Patient Safety to a surgical population

PubMed Central

McElroy, L. M.; Woods, D. M.; Yanes, A. F.; Skaro, A. I.; Daud, A.; Curtis, T.; Wymore, E.; Holl, J. L.; Abecassis, M. M.; Ladner, D. P.

2016-01-01

Objective Efforts to improve patient safety are challenged by the lack of universally agreed upon terms. The International Classification for Patient Safety (ICPS) was developed by the World Health Organization for this purpose. This study aimed to test the applicability of the ICPS to a surgical population. Design A web-based safety debriefing was sent to clinicians involved in surgical care of abdominal organ transplant patients. A multidisciplinary team of patient safety experts, surgeons and researchers used the data to develop a system of classification based on the ICPS. Disagreements were reconciled via consensus, and a codebook was developed for future use by researchers. Results A total of 320 debriefing responses were used for the initial review and codebook development. In total, the 320 debriefing responses contained 227 patient safety incidents (range: 0–7 per debriefing) and 156 contributing factors/hazards (0–5 per response). The most common severity classification was ‘reportable circumstance,’ followed by ‘near miss.’ The most common incident types were ‘resources/organizational management,’ followed by ‘medical device/equipment.’ Several aspects of surgical care were encompassed by more than one classification, including operating room scheduling, delays in care, trainee-related incidents, interruptions and handoffs. Conclusions This study demonstrates that a framework for patient safety can be applied to facilitate the organization and analysis of surgical safety data. Several unique aspects of surgical care require consideration, and by using a standardized framework for describing concepts, research findings can be compared and disseminated across surgical specialties. The codebook is intended for use as a framework for other specialties and institutions. PMID:26803539

The 1986 ARI Survey of U.S. Army Recruits: Codebook for Army Reserve/ National Guard Survey Respondents

DTIC Science & Technology

1987-04-01

NA NA NA YES 89 THE 1986 ARI SURVEY OF ARMY RECRUITS: CODEBOOK FOR SUMMER 86 USAR 6 ARNG SURVEY RESPONDENTS SSN WHAT IS YOUR SOCIAL SECURITY... Social Sciences Approved (of public relcise distribution unlimited U. S. ARMY RESEARCH INSTITUTE FOR THE BEHAVIORAL AND SOCIAL SCIENCES A Field...RtMirch Institut* for tn« Behavioral and Social Sciancas. NOTE: ThU Rasaarch Product Is not to ba construad as an olflclal Dapartmant of tha Army

Cross-entropy embedding of high-dimensional data using the neural gas model.

PubMed

Estévez, Pablo A; Figueroa, Cristián J; Saito, Kazumi

2005-01-01

A cross-entropy approach to mapping high-dimensional data into a low-dimensional space embedding is presented. The method allows to project simultaneously the input data and the codebook vectors, obtained with the Neural Gas (NG) quantizer algorithm, into a low-dimensional output space. The aim of this approach is to preserve the relationship defined by the NG neighborhood function for each pair of input and codebook vectors. A cost function based on the cross-entropy between input and output probabilities is minimized by using a Newton-Raphson method. The new approach is compared with Sammon's non-linear mapping (NLM) and the hierarchical approach of combining a vector quantizer such as the self-organizing feature map (SOM) or NG with the NLM recall algorithm. In comparison with these techniques, our method delivers a clear visualization of both data points and codebooks, and it achieves a better mapping quality in terms of the topology preservation measure q(m).

Armed Forces 1996 Equal Opportunity Survey: Administration, Datasets, and Codebook

DTIC Science & Technology

1997-12-01

was taken in the preparation of analysis files. These files balance two needs: public access to data with sufficient information for accurate estimates...Native American/Alaskan Native, and Other. The duty location variable has two levels: US (a duty station in any of the 50 states or the District of...More specifically, the new DMDC procedures most closely follow CASRO’s Sample Type U design. As discussed by CASRO, the overall response rate has two

Early Childhood Longitudinal Study, Kindergarten Class of 1998-99 (ECLS-K): Combined User's Manual for the ECLS-K Eighth-Grade and K-8 Full Sample Data Files and Electronic Codebooks. NCES 2009-004

ERIC Educational Resources Information Center

Tourangeau, Karen; Nord, Christine; Le, Thanh; Sorongon, Alberto G.; Najarian, Michelle

2009-01-01

This manual provides guidance and documentation for users of the eighth-grade data of the Early Childhood Longitudinal Study, Kindergarten Class of 1998-99 (ECLS-K). It begins with an overview of the ECLS-K study. Subsequent chapters provide details on the instruments and measures used, the sample design, weighting procedures, response rates, data…

The 1985 Survey of Army Recruits: Codebook for Summer 85 Active Army Survey Respondents. Volume 1

DTIC Science & Technology

1986-05-01

ICHECKED - ALL SERVICES TOGETHER 7220 I1700 .0 I TO-TALSI INI A I B I C I D IT 11982 11983 11984 1 11 R Q165 I IQ20A5 I9IA- YES WA- 4 -051 THE 1985 ARI... ICHECKED - AN ARMY POST TOUR ACCOMPANIED BY A I I IU.S. ARMY RECRUITER 7220 i-100.0 1T TOTA L-§ N’ A I B I C I D -T 11982 11983 119841 N02 I I...I 13.0 I 1 ICHECKED - A U.S. ARMY SPONSORED OR PRESENTED I I IPROGRAM AT SCHOOL WHERE SOLDIERS DESCRIBE THEIR I I ARMY EXPERIENCES AND DUTIES -7220 I

BSIFT: toward data-independent codebook for large scale image search.

PubMed

Zhou, Wengang; Li, Houqiang; Hong, Richang; Lu, Yijuan; Tian, Qi

2015-03-01

Bag-of-Words (BoWs) model based on Scale Invariant Feature Transform (SIFT) has been widely used in large-scale image retrieval applications. Feature quantization by vector quantization plays a crucial role in BoW model, which generates visual words from the high- dimensional SIFT features, so as to adapt to the inverted file structure for the scalable retrieval. Traditional feature quantization approaches suffer several issues, such as necessity of visual codebook training, limited reliability, and update inefficiency. To avoid the above problems, in this paper, a novel feature quantization scheme is proposed to efficiently quantize each SIFT descriptor to a descriptive and discriminative bit-vector, which is called binary SIFT (BSIFT). Our quantizer is independent of image collections. In addition, by taking the first 32 bits out from BSIFT as code word, the generated BSIFT naturally lends itself to adapt to the classic inverted file structure for image indexing. Moreover, the quantization error is reduced by feature filtering, code word expansion, and query sensitive mask shielding. Without any explicit codebook for quantization, our approach can be readily applied in image search in some resource-limited scenarios. We evaluate the proposed algorithm for large scale image search on two public image data sets. Experimental results demonstrate the index efficiency and retrieval accuracy of our approach.

Texton-based analysis of paintings

NASA Astrophysics Data System (ADS)

van der Maaten, Laurens J. P.; Postma, Eric O.

2010-08-01

The visual examination of paintings is traditionally performed by skilled art historians using their eyes. Recent advances in intelligent systems may support art historians in determining the authenticity or date of creation of paintings. In this paper, we propose a technique for the examination of brushstroke structure that views the wildly overlapping brushstrokes as texture. The analysis of the painting texture is performed with the help of a texton codebook, i.e., a codebook of small prototypical textural patches. The texton codebook can be learned from a collection of paintings. Our textural analysis technique represents paintings in terms of histograms that measure the frequency by which the textons in the codebook occur in the painting (so-called texton histograms). We present experiments that show the validity and effectiveness of our technique for textural analysis on a collection of digitized high-resolution reproductions of paintings by Van Gogh and his contemporaries. As texton histograms cannot be easily be interpreted by art experts, the paper proposes to approaches to visualize the results on the textural analysis. The first approach visualizes the similarities between the histogram representations of paintings by employing a recently proposed dimensionality reduction technique, called t-SNE. We show that t-SNE reveals a clear separation of paintings created by Van Gogh and those created by other painters. In addition, the period of creation is faithfully reflected in the t-SNE visualizations. The second approach visualizes the similarities and differences between paintings by highlighting regions in a painting in which the textural structure of the painting is unusual. We illustrate the validity of this approach by means of an experiment in which we highlight regions in a painting by Monet that are not very "Van Gogh-like". Taken together, we believe the tools developed in this study are well capable of assisting for art historians in support of their study of paintings.

AT2 DS II - Accelerator System Design (Part II) - CCC Video Conference

ScienceCinema

None

2017-12-09

Discussion Session - Accelerator System Design (Part II) Tutors: C. Darve, J. Weisend II, Ph. Lebrun, A. Dabrowski, U. Raich Video Conference with the CERN Control Center. Experts in the field of Accelerator science will be available to answer the students questions. This session will link the CCC and SA (using Codec VC).

Pedestrian Detection in Far-Infrared Daytime Images Using a Hierarchical Codebook of SURF

PubMed Central

Besbes, Bassem; Rogozan, Alexandrina; Rus, Adela-Maria; Bensrhair, Abdelaziz; Broggi, Alberto

2015-01-01

One of the main challenges in intelligent vehicles concerns pedestrian detection for driving assistance. Recent experiments have showed that state-of-the-art descriptors provide better performances on the far-infrared (FIR) spectrum than on the visible one, even in daytime conditions, for pedestrian classification. In this paper, we propose a pedestrian detector with on-board FIR camera. Our main contribution is the exploitation of the specific characteristics of FIR images to design a fast, scale-invariant and robust pedestrian detector. Our system consists of three modules, each based on speeded-up robust feature (SURF) matching. The first module allows generating regions-of-interest (ROI), since in FIR images of the pedestrian shapes may vary in large scales, but heads appear usually as light regions. ROI are detected with a high recall rate with the hierarchical codebook of SURF features located in head regions. The second module consists of pedestrian full-body classification by using SVM. This module allows one to enhance the precision with low computational cost. In the third module, we combine the mean shift algorithm with inter-frame scale-invariant SURF feature tracking to enhance the robustness of our system. The experimental evaluation shows that our system outperforms, in the FIR domain, the state-of-the-art Haar-like Adaboost-cascade, histogram of oriented gradients (HOG)/linear SVM (linSVM) and MultiFtrpedestrian detectors, trained on the FIR images. PMID:25871724

Large-scale classification of traffic signs under real-world conditions

NASA Astrophysics Data System (ADS)

Hazelhoff, Lykele; Creusen, Ivo; van de Wouw, Dennis; de With, Peter H. N.

2012-02-01

Traffic sign inventories are important to governmental agencies as they facilitate evaluation of traffic sign locations and are beneficial for road and sign maintenance. These inventories can be created (semi-)automatically based on street-level panoramic images. In these images, object detection is employed to detect the signs in each image, followed by a classification stage to retrieve the specific sign type. Classification of traffic signs is a complicated matter, since sign types are very similar with only minor differences within the sign, a high number of different signs is involved and multiple distortions occur, including variations in capturing conditions, occlusions, viewpoints and sign deformations. Therefore, we propose a method for robust classification of traffic signs, based on the Bag of Words approach for generic object classification. We extend the approach with a flexible, modular codebook to model the specific features of each sign type independently, in order to emphasize at the inter-sign differences instead of the parts common for all sign types. Additionally, this allows us to model and label the present false detections. Furthermore, analysis of the classification output provides the unreliable results. This classification system has been extensively tested for three different sign classes, covering 60 different sign types in total. These three data sets contain the sign detection results on street-level panoramic images, extracted from a country-wide database. The introduction of the modular codebook shows a significant improvement for all three sets, where the system is able to classify about 98% of the reliable results correctly.

Cave Buttes Dam Master Plan, Phoenix, Arizona and Vicinity (Including New River).

DTIC Science & Technology

1982-03-01

Mar. 1975 Arizona, Hydrology, Part 1 3 New River and Phoenix City Streams, Mar. 1976 July 1977 Arizona, Design Memorandum No. 3, (SPD App) General ...with Maricopa County, Arizona CEQ) 3 New River and Phoenix City Streams, Arizona, Design Memorandum No. 3, General Design Memorandum--Phase II, Project...Hydrology Part 2 3 New River and Phoenix City Streams, Arizona, Design Memorandum No. 3, General Design Memorandum--Phase II, Project Design Part 3

Codebook-based electrooculography data analysis towards cognitive activity recognition.

PubMed

Lagodzinski, P; Shirahama, K; Grzegorzek, M

2018-04-01

With the advancement in mobile/wearable technology, people started to use a variety of sensing devices to track their daily activities as well as health and fitness conditions in order to improve the quality of life. This work addresses an idea of eye movement analysis, which due to the strong correlation with cognitive tasks can be successfully utilized in activity recognition. Eye movements are recorded using an electrooculographic (EOG) system built into the frames of glasses, which can be worn more unobtrusively and comfortably than other devices. Since the obtained information is low-level sensor data expressed as a sequence representing values in constant intervals (100 Hz), the cognitive activity recognition problem is formulated as sequence classification. However, it is unclear what kind of features are useful for accurate cognitive activity recognition. Thus, a machine learning algorithm like a codebook approach is applied, which instead of focusing on feature engineering is using a distribution of characteristic subsequences (codewords) to describe sequences of recorded EOG data, where the codewords are obtained by clustering a large number of subsequences. Further, statistical analysis of the codeword distribution results in discovering features which are characteristic to a certain activity class. Experimental results demonstrate good accuracy of the codebook-based cognitive activity recognition reflecting the effective usage of the codewords. Copyright © 2017 Elsevier Ltd. All rights reserved.

The 1984 ARI Survey of Army Recruits: Codebook for October 84/February 85 USAR (U.S. Army Reserve) and ARNG (Army National Guard) Survey Respondents

DTIC Science & Technology

1986-05-01

I 1 ICHECKED -IN OTHER PARTS OF A NEWSPAPER 1290 --- _ _ _ _I__ _ _ _ __ __ _ __ _ __ _ __ 120I 100.0 TTA I 1 1 A I B I C I D T 11982 1198317 IN I__...FREQ I PERCENT I VALUE I MEANING ___ I _ _ _ I _ _ _ __ __1_ __ _ _ _ _ _8 1 0.6 1 . I NO RESPONSE 768 1 59.5 1 0 1 NOT CHECKED 514 I39.8 I 1 ICHECKED ...27 1 2.1 1 1 ICHECKED - BOOKLET ABOUT ARMY COLLEGE FUND 1290 1 100.0 I T-OTALSI TO CHECK FOR OUT OF RANGE VALUES FOR THIS ’MARK ALL THAT APPLY

Design of two-dimensional channels with prescribed velocity distributions along the channel walls

NASA Technical Reports Server (NTRS)

Stanitz, John D

1953-01-01

A general method of design is developed for two-dimensional unbranched channels with prescribed velocities as a function of arc length along the channel walls. The method is developed for both compressible and incompressible, irrotational, nonviscous flow and applies to the design of elbows, diffusers, nozzles, and so forth. In part I solutions are obtained by relaxation methods; in part II solutions are obtained by a Green's function. Five numerical examples are given in part I including three elbow designs with the same prescribed velocity as a function of arc length along the channel walls but with incompressible, linearized compressible, and compressible flow. One numerical example is presented in part II for an accelerating elbow with linearized compressible flow, and the time required for the solution by a Green's function in part II was considerably less than the time required for the same solution by relaxation methods in part I.

High Performance Compression of Science Data

NASA Technical Reports Server (NTRS)

Storer, James A.; Carpentieri, Bruno; Cohn, Martin

1994-01-01

Two papers make up the body of this report. One presents a single-pass adaptive vector quantization algorithm that learns a codebook of variable size and shape entries; the authors present experiments on a set of test images showing that with no training or prior knowledge of the data, for a given fidelity, the compression achieved typically equals or exceeds that of the JPEG standard. The second paper addresses motion compensation, one of the most effective techniques used in interframe data compression. A parallel block-matching algorithm for estimating interframe displacement of blocks with minimum error is presented. The algorithm is designed for a simple parallel architecture to process video in real time.

Analysis of the possibility of using G.729 codec for steganographic transmission

NASA Astrophysics Data System (ADS)

Piotrowski, Zbigniew; Ciołek, Michał; Dołowski, Jerzy; Wojtuń, Jarosław

2017-04-01

Network steganography is dedicated in particular for those communication services for which there are no bridges or nodes carrying out unintentional attacks on steganographic sequence. In order to set up a hidden communication channel the method of data encoding and decoding was implemented using code books of codec G.729. G.729 codec includes, in its construction, linear prediction vocoder CS-ACELP (Conjugate Structure Algebraic Code Excited Linear Prediction), and by modifying the binary content of the codebook, it is easy to change a binary output stream. The article describes the results of research on the selection of these bits of the codebook codec G.729 which the negation of the least have influence to the loss of quality and fidelity of the output signal. The study was performed with the use of subjective and objective listening tests.

Assessment of Ice Shape Roughness Using a Self-Orgainizing Map Approach

NASA Technical Reports Server (NTRS)

Mcclain, Stephen T.; Kreeger, Richard E.

2013-01-01

Self-organizing maps are neural-network techniques for representing noisy, multidimensional data aligned along a lower-dimensional and nonlinear manifold. For a large set of noisy data, each element of a finite set of codebook vectors is iteratively moved in the direction of the data closest to the winner codebook vector. Through successive iterations, the codebook vectors begin to align with the trends of the higher-dimensional data. Prior investigations of ice shapes have focused on using self-organizing maps to characterize mean ice forms. The Icing Research Branch has recently acquired a high resolution three dimensional scanner system capable of resolving ice shape surface roughness. A method is presented for the evaluation of surface roughness variations using high-resolution surface scans based on a self-organizing map representation of the mean ice shape. The new method is demonstrated for 1) an 18-in. NACA 23012 airfoil 2 AOA just after the initial ice coverage of the leading 5 of the suction surface of the airfoil, 2) a 21-in. NACA 0012 at 0AOA following coverage of the leading 10 of the airfoil surface, and 3) a cold-soaked 21-in.NACA 0012 airfoil without ice. The SOM method resulted in descriptions of the statistical coverage limits and a quantitative representation of early stages of ice roughness formation on the airfoils. Limitations of the SOM method are explored, and the uncertainty limits of the method are investigated using the non-iced NACA 0012 airfoil measurements.

Predictive Multiple Model Switching Control with the Self-Organizing Map

NASA Technical Reports Server (NTRS)

Motter, Mark A.

2000-01-01

A predictive, multiple model control strategy is developed by extension of self-organizing map (SOM) local dynamic modeling of nonlinear autonomous systems to a control framework. Multiple SOMs collectively model the global response of a nonautonomous system to a finite set of representative prototype controls. Each SOM provides a codebook representation of the dynamics corresponding to a prototype control. Different dynamic regimes are organized into topological neighborhoods where the adjacent entries in the codebook represent the global minimization of a similarity metric. The SOM is additionally employed to identify the local dynamical regime, and consequently implements a switching scheme that selects the best available model for the applied control. SOM based linear models are used to predict the response to a larger family of control sequences which are clustered on the representative prototypes. The control sequence which corresponds to the prediction that best satisfies the requirements on the system output is applied as the external driving signal.

Multipath search coding of stationary signals with applications to speech

NASA Astrophysics Data System (ADS)

Fehn, H. G.; Noll, P.

1982-04-01

This paper deals with the application of multipath search coding (MSC) concepts to the coding of stationary memoryless and correlated sources, and of speech signals, at a rate of one bit per sample. Use is made of three MSC classes: (1) codebook coding, or vector quantization, (2) tree coding, and (3) trellis coding. This paper explains the performances of these coders and compares them both with those of conventional coders and with rate-distortion bounds. The potentials of MSC coding strategies are demonstrated by illustrations. The paper reports also on results of MSC coding of speech, where both the strategy of adaptive quantization and of adaptive prediction were included in coder design.

High performance compression of science data

NASA Technical Reports Server (NTRS)

Storer, James A.; Cohn, Martin

1994-01-01

Two papers make up the body of this report. One presents a single-pass adaptive vector quantization algorithm that learns a codebook of variable size and shape entries; the authors present experiments on a set of test images showing that with no training or prior knowledge of the data, for a given fidelity, the compression achieved typically equals or exceeds that of the JPEG standard. The second paper addresses motion compensation, one of the most effective techniques used in the interframe data compression. A parallel block-matching algorithm for estimating interframe displacement of blocks with minimum error is presented. The algorithm is designed for a simple parallel architecture to process video in real time.

Trucks involved in fatal accidents codebook 2008.

DOT National Transportation Integrated Search

2011-01-01

This report provides documentation for UMTRIs file of Trucks Involved in Fatal Accidents : (TIFA), 2008, including distributions of the code values for each variable in the file. The 2008 : TIFA file is a census of all medium and heavy trucks invo...

Buses involved in fatal accidents codebook 2008.

DOT National Transportation Integrated Search

2011-03-01

This report provides documentation for UMTRIs file of Buses Involved in Fatal Accidents (BIFA), 2008, : including distributions of the code values for each variable in the file. The 2008 BIFA file is a census of all : buses involved in a fatal acc...

Buses involved in fatal accidents codebook 2007.

DOT National Transportation Integrated Search

2009-12-01

This report provides documentation for UMTRIs file of Buses Involved in Fatal Accidents (BIFA), 2007, : including distributions of the code values for each variable in the file. The 2007 BIFA file is a census of all : buses involved in a fatal acc...

Designing SoTL Studies--Part II: Practicality

ERIC Educational Resources Information Center

Bartsch, Robert A.

2013-01-01

This chapter suggests solutions to common practical problems in designing SoTL studies. In addition, the advantages and disadvantages of different types of designs are discussed. [Part I available at EJ1029363.

Image size invariant visual cryptography for general access structures subject to display quality constraints.

PubMed

Lee, Kai-Hui; Chiu, Pei-Ling

2013-10-01

Conventional visual cryptography (VC) suffers from a pixel-expansion problem, or an uncontrollable display quality problem for recovered images, and lacks a general approach to construct visual secret sharing schemes for general access structures. We propose a general and systematic approach to address these issues without sophisticated codebook design. This approach can be used for binary secret images in non-computer-aided decryption environments. To avoid pixel expansion, we design a set of column vectors to encrypt secret pixels rather than using the conventional VC-based approach. We begin by formulating a mathematic model for the VC construction problem to find the column vectors for the optimal VC construction, after which we develop a simulated-annealing-based algorithm to solve the problem. The experimental results show that the display quality of the recovered image is superior to that of previous papers.

A study of the effectiveness of machine learning methods for classification of clinical interview fragments into a large number of categories.

PubMed

Hasan, Mehedi; Kotov, Alexander; Carcone, April; Dong, Ming; Naar, Sylvie; Hartlieb, Kathryn Brogan

2016-08-01

This study examines the effectiveness of state-of-the-art supervised machine learning methods in conjunction with different feature types for the task of automatic annotation of fragments of clinical text based on codebooks with a large number of categories. We used a collection of motivational interview transcripts consisting of 11,353 utterances, which were manually annotated by two human coders as the gold standard, and experimented with state-of-art classifiers, including Naïve Bayes, J48 Decision Tree, Support Vector Machine (SVM), Random Forest (RF), AdaBoost, DiscLDA, Conditional Random Fields (CRF) and Convolutional Neural Network (CNN) in conjunction with lexical, contextual (label of the previous utterance) and semantic (distribution of words in the utterance across the Linguistic Inquiry and Word Count dictionaries) features. We found out that, when the number of classes is large, the performance of CNN and CRF is inferior to SVM. When only lexical features were used, interview transcripts were automatically annotated by SVM with the highest classification accuracy among all classifiers of 70.8%, 61% and 53.7% based on the codebooks consisting of 17, 20 and 41 codes, respectively. Using contextual and semantic features, as well as their combination, in addition to lexical ones, improved the accuracy of SVM for annotation of utterances in motivational interview transcripts with a codebook consisting of 17 classes to 71.5%, 74.2%, and 75.1%, respectively. Our results demonstrate the potential of using machine learning methods in conjunction with lexical, semantic and contextual features for automatic annotation of clinical interview transcripts with near-human accuracy. Copyright © 2016 Elsevier Inc. All rights reserved.

Test and Evaluation of a Course Designed for Mobile Learning. ZIFF Papiere.

ERIC Educational Resources Information Center

Strohlein, Georg; Fritsch, Helmut

This report contains two parts: "Part I: Design and Implementation" (Georg Strohlein) and "Part II: Student Usage" (Helmut Fritsch). Part I describes the development and practical use of a short course on descriptive statistics designed for mobile learning (i.e., the situation when the learning person is mobile and utilizes…

International Linear Collider Technical Design Report (Volumes 1 through 4)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison M.

2013-03-27

The design report consists of four volumes: Volume 1, Executive Summary; Volume 2, Physics; Volume 3, Accelerator (Part I, R and D in the Technical Design Phase, and Part II, Baseline Design); and Volume 4, Detectors.

Unlearning Established Organizational Routines--Part II

ERIC Educational Resources Information Center

Fiol, C. Marlena; O'Connor, Edward J.

2017-01-01

Purpose: The purpose of Part II of this two-part paper is to uncover important differences in the nature of the three unlearning subprocesses, which call for different leadership interventions to motivate people to move through them. Design/methodology/approach: The paper draws on research in behavioral medicine and psychology to demonstrate that…

Trucks involved in fatal accidents codebook 2004 (Version March 23, 2007).

DOT National Transportation Integrated Search

2007-03-01

"This report provides documentation for UMTRIs file of Trucks Involved in Fatal Accidents (TIFA), : 2004, including distributions of the code values for each variable in the file. The 2004 TIFA file is : a census of all medium and heavy trucks inv...

December 2005 Status of Forces Survey of Active Duty Members: Administration, Datasets, and Codebook

DTIC Science & Technology

2006-06-01

Moderate extent Small extent Not a problem p. Settling damage claims q. Non- reimbursed transportation...costs incurred during the move r. Timeliness of reimbursements s. Accuracy...of reimbursements t. Change in cost of living (Continued) For your most

Trucks involved in fatal accidents codebook 2010 (Version October 22, 2012).

DOT National Transportation Integrated Search

2012-11-01

This report provides documentation for UMTRIs file of Trucks Involved in Fatal Accidents : (TIFA), 2010, including distributions of the code values for each variable in the file. The 2010 : TIFA file is a census of all medium and heavy trucks invo...

Fusion of Deep Learning and Compressed Domain features for Content Based Image Retrieval.

PubMed

Liu, Peizhong; Guo, Jing-Ming; Wu, Chi-Yi; Cai, Danlin

2017-08-29

This paper presents an effective image retrieval method by combining high-level features from Convolutional Neural Network (CNN) model and low-level features from Dot-Diffused Block Truncation Coding (DDBTC). The low-level features, e.g., texture and color, are constructed by VQ-indexed histogram from DDBTC bitmap, maximum, and minimum quantizers. Conversely, high-level features from CNN can effectively capture human perception. With the fusion of the DDBTC and CNN features, the extended deep learning two-layer codebook features (DL-TLCF) is generated using the proposed two-layer codebook, dimension reduction, and similarity reweighting to improve the overall retrieval rate. Two metrics, average precision rate (APR) and average recall rate (ARR), are employed to examine various datasets. As documented in the experimental results, the proposed schemes can achieve superior performance compared to the state-of-the-art methods with either low- or high-level features in terms of the retrieval rate. Thus, it can be a strong candidate for various image retrieval related applications.

Distributed single source coding with side information

NASA Astrophysics Data System (ADS)

Vila-Forcen, Jose E.; Koval, Oleksiy; Voloshynovskiy, Sviatoslav V.

2004-01-01

In the paper we advocate image compression technique in the scope of distributed source coding framework. The novelty of the proposed approach is twofold: classical image compression is considered from the positions of source coding with side information and, contrarily to the existing scenarios, where side information is given explicitly, side information is created based on deterministic approximation of local image features. We consider an image in the transform domain as a realization of a source with a bounded codebook of symbols where each symbol represents a particular edge shape. The codebook is image independent and plays the role of auxiliary source. Due to the partial availability of side information at both encoder and decoder we treat our problem as a modification of Berger-Flynn-Gray problem and investigate a possible gain over the solutions when side information is either unavailable or available only at decoder. Finally, we present a practical compression algorithm for passport photo images based on our concept that demonstrates the superior performance in very low bit rate regime.

Comparisons between Common and Dedicated Reference Signals for MIMO Multiplexing Using Precoding in Evolved UTRA Downlink

NASA Astrophysics Data System (ADS)

Taoka, Hidekazu; Kishiyama, Yoshihisa; Higuchi, Kenichi; Sawahashi, Mamoru

This paper presents comparisons between common and dedicated reference signals (RSs) for channel estimation in MIMO multiplexing using codebook-based precoding for orthogonal frequency division multiplexing (OFDM) radio access in the Evolved UTRA downlink with frequency division duplexing (FDD). We clarify the best RS structure for precoding-based MIMO multiplexing based on comparisons of the structures in terms of the achievable throughput taking into account the overhead of the common and dedicated RSs and the precoding matrix indication (PMI) signal. Based on extensive simulations on the throughput in 2-by-2 and 4-by-4 MIMO multiplexing with precoding, we clarify that channel estimation based on common RSs multiplied with the precoding matrix indicated by the PMI signal achieves higher throughput compared to that using dedicated RSs irrespective of the number of spatial multiplexing streams when the number of available precoding matrices, i.e., the codebook size, is less than approximately 16 and 32 for 2-by-2 and 4-by-4 MIMO multiplexing, respectively.

Iowa interstate rest area stabilization ponds : Part I. Pond design, Part II: Feasibility of wind-powered aeration.

DOT National Transportation Integrated Search

1979-09-01

"This report is presented in two parts. Part I takes a new look at the design of rest area stabilization ponds after nearly 10 years'experience with some of the existing ponds and in the light of new design standards issued by Iowa DEQ. The Iowa DOT ...

Advancing Virtual Patient Simulations through Design Research and Inter"PLAY": Part II--Integration and Field Test

ERIC Educational Resources Information Center

Hirumi, Atsusi; Johnson, Teresa; Reyes, Ramsamooj Javier; Lok, Benjamin; Johnsen, Kyle; Rivera-Gutierrez, Diego J.; Bogert, Kenneth; Kubovec, Stacey; Eakins, Michael; Kleinsmith, Andrea; Bellew, Michael; Cendan, Juan

2016-01-01

In Part I of this two-part series, we examined the design and development of NERVE: A virtual patient simulation created to give medical students standardized experiences in interviewing, examining, and diagnosing virtual patients with cranial nerve disorders. We illustrated key design features and discussed how design-based research studies…

Calculus of Elementary Functions, Part II. Teacher's Commentary. Revised Edition.

ERIC Educational Resources Information Center

Herriot, Sarah T.; And Others

This course is intended for students who have a thorough knowledge of college preparatory mathematics, including algebra, axiomatic geometry, trigonometry, and analytic geometry. This teacher's guide is for Part II of the course. It is designed to follow Part I of the text. The guide contains background information, suggested instructional…

Calculus of Elementary Functions, Part II. Student Text. Revised Edition.

ERIC Educational Resources Information Center

Herriot, Sarah T.; And Others

This course is intended for students who have a thorough knowledge of college preparatory mathematics, including algebra, axiomatic geometry, trigonometry, and analytic geometry. This text, Part II, contains material designed to follow Part I. Chapters included in this text are: (6) Derivatives of Exponential and Related Functions; (7) Area and…

Action recognition via cumulative histogram of multiple features

NASA Astrophysics Data System (ADS)

Yan, Xunshi; Luo, Yupin

2011-01-01

Spatial-temporal interest points (STIPs) are popular in human action recognition. However, they suffer from difficulties in determining size of codebook and losing much information during forming histograms. In this paper, spatial-temporal interest regions (STIRs) are proposed, which are based on STIPs and are capable of marking the locations of the most ``shining'' human body parts. In order to represent human actions, the proposed approach takes great advantages of multiple features, including STIRs, pyramid histogram of oriented gradients and pyramid histogram of oriented optical flows. To achieve this, cumulative histogram is used to integrate dynamic information in sequences and to form feature vectors. Furthermore, the widely used nearest neighbor and AdaBoost methods are employed as classification algorithms. Experiments on public datasets KTH, Weizmann and UCF sports show that the proposed approach achieves effective and robust results.

Trucks involved in fatal accidents codebook 1999 (version September 19, 2001)

DOT National Transportation Integrated Search

2001-09-01

This report provides one-way frequencies for all the vehicles in UMTRI's file of Trucks Involved in Fatal Accidents (TIFA), 1999. The 1999 TIFA file is a census of all medium and heavy trucks involved in a fatal accident in the United States. The TIF...

2000 SURVEY OF RESERVE COMPONENT PERSONNEL: ADMINISTRATION, DATASETS, AND CODEBOOK

DTIC Science & Technology

2002-07-01

Record Number 1 DPOC * DoD Primary Occupation Code 1860 DR* Physician 1862 DSVCOCC* Duty Occupation 1863 DTYOCC* Duty Occupation 1864 DUPRET...Constructed Pay Grade Group 2 1856 CPAYGRP3 Constructed Pay Grade Group 3 1857 CRACECAT Race/Ethnic Category 2 1858 CSERVICE CService - Member 1859 DPOC

75 FR 80571 - Core Principles and Other Requirements for Designated Contract Markets

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

... Part II Commodity Futures Trading Commission 17 CFR Parts 1, 16, and 38 Core Principles and Other... CFR Parts 1, 16, and 38 RIN 3038-AD09 Core Principles and Other Requirements for Designated Contract... Principles 1. Subpart B--Designation as Contract Market 2. Subpart C--Compliance With Rules i. Proposed Sec...

14 CFR Appendix A to Part 43 - Major Alterations, Major Repairs, and Preventive Maintenance

Code of Federal Regulations, 2012 CFR

2012-01-01

... alterations: (i) Changes in blade design. (ii) Changes in hub design. (iii) Changes in the governor or control... alterations: (i) Wings. (ii) Tail surfaces. (iii) Fuselage. (iv) Engine mounts. (v) Control system. (vi... the basic design of the fuel, oil, cooling, heating, cabin pressurization, electrical, hydraulic, de...

29 CFR 1918.62 - Miscellaneous auxiliary gear.

Code of Federal Regulations, 2010 CFR

2010-07-01

... appendix II to this part. A design safety factor of at least five shall be maintained for the common sizes... cranes, designed to be used with lesser wire rope safety factors; (ii) According to design factors in... pre-slung drafts. (3) Eye splices shall consist of at least three full tucks. Short splices shall...

29 CFR 1918.62 - Miscellaneous auxiliary gear.

Code of Federal Regulations, 2011 CFR

2011-07-01

... appendix II to this part. A design safety factor of at least five shall be maintained for the common sizes... cranes, designed to be used with lesser wire rope safety factors; (ii) According to design factors in... pre-slung drafts. (3) Eye splices shall consist of at least three full tucks. Short splices shall...

14 CFR Appendix A to Part 43 - Major Alterations, Major Repairs, and Preventive Maintenance

Code of Federal Regulations, 2014 CFR

2014-01-01

... alterations: (i) Changes in blade design. (ii) Changes in hub design. (iii) Changes in the governor or control... alterations: (i) Wings. (ii) Tail surfaces. (iii) Fuselage. (iv) Engine mounts. (v) Control system. (vi... the basic design of the fuel, oil, cooling, heating, cabin pressurization, electrical, hydraulic, de...

14 CFR Appendix A to Part 43 - Major Alterations, Major Repairs, and Preventive Maintenance

Code of Federal Regulations, 2011 CFR

2011-01-01

... alterations: (i) Changes in blade design. (ii) Changes in hub design. (iii) Changes in the governor or control... alterations: (i) Wings. (ii) Tail surfaces. (iii) Fuselage. (iv) Engine mounts. (v) Control system. (vi... the basic design of the fuel, oil, cooling, heating, cabin pressurization, electrical, hydraulic, de...

14 CFR Appendix A to Part 43 - Major Alterations, Major Repairs, and Preventive Maintenance

Code of Federal Regulations, 2010 CFR

2010-01-01

... alterations: (i) Changes in blade design. (ii) Changes in hub design. (iii) Changes in the governor or control... alterations: (i) Wings. (ii) Tail surfaces. (iii) Fuselage. (iv) Engine mounts. (v) Control system. (vi... the basic design of the fuel, oil, cooling, heating, cabin pressurization, electrical, hydraulic, de...

Institutional Self-Analysis and Long-Range Planning in a Small Liberal Arts College. Part II-- Study Procedure.

ERIC Educational Resources Information Center

Frame, Stanley M.

In the Spring of 1969, Bethany Nazarene College started an intensive self evaluation effort, called the Ten-Year Advance Study. Part I of the report, the Study Design, was published in October 1969. This study, Part II, relates the study activities, the methodology, and sources consulted. The effort involved over 120 administrators, faculty,…

2008 Post-Election Voting Survey of Federal Civilians Overseas: Administration, Datasets and Codebook

DTIC Science & Technology

2009-09-01

184 LEGALRESR Recode-Tab:[8] State of legal voting res 72 LITHO * Litho code 473 NOFVAPA* 42a. [42a] Not used FVAP tele:Did not know 363...471 INRECNO Master SCS ID number 472 LITHO Litho code 473 QCOMPF Binary variable indicating if case compl 474 QCOMPN [QCOMPN] Questions

Agency Online: Trends in a University Learning Course

ERIC Educational Resources Information Center

Ligorio, Maria Beatrice; Impedovo, Maria Antonietta; Arcidiacono, Francesco

2017-01-01

This article aims to investigate how university students perform agency in an online course and whether the collaborative nature of the course affects such expression. A total of 11 online web forums involving 18 students (N = 745 posts in total) were qualitatively analysed through the use of a codebook composed of five categories (individual,…

AUTOMOTIVE DIESEL MAINTENANCE L. UNIT XII, PART I--MAINTAINING THE FUEL SYSTEM (PART II), CUMMINS DIESEL ENGINE, PART II--UNIT INSTALLATION (ENGINE).

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATION AND MAINTENANCE OF THE DIESEL ENGINE FUEL SYSTEM AND THE PROCEDURES FOR DIESEL ENGINE INSTALLATION. TOPICS ARE FUEL FLOW CHARACTERISTICS, PTG FUEL PUMP, PREPARATION FOR INSTALLATION, AND INSTALLING ENGINE. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL BRANCH…

Gain-adaptive vector quantization for medium-rate speech coding

NASA Technical Reports Server (NTRS)

Chen, J.-H.; Gersho, A.

1985-01-01

A class of adaptive vector quantizers (VQs) that can dynamically adjust the 'gain' of codevectors according to the input signal level is introduced. The encoder uses a gain estimator to determine a suitable normalization of each input vector prior to VQ coding. The normalized vectors have reduced dynamic range and can then be more efficiently coded. At the receiver, the VQ decoder output is multiplied by the estimated gain. Both forward and backward adaptation are considered and several different gain estimators are compared and evaluated. An approach to optimizing the design of gain estimators is introduced. Some of the more obvious techniques for achieving gain adaptation are substantially less effective than the use of optimized gain estimators. A novel design technique that is needed to generate the appropriate gain-normalized codebook for the vector quantizer is introduced. Experimental results show that a significant gain in segmental SNR can be obtained over nonadaptive VQ with a negligible increase in complexity.

Compression of next-generation sequencing quality scores using memetic algorithm

PubMed Central

2014-01-01

Background The exponential growth of next-generation sequencing (NGS) derived DNA data poses great challenges to data storage and transmission. Although many compression algorithms have been proposed for DNA reads in NGS data, few methods are designed specifically to handle the quality scores. Results In this paper we present a memetic algorithm (MA) based NGS quality score data compressor, namely MMQSC. The algorithm extracts raw quality score sequences from FASTQ formatted files, and designs compression codebook using MA based multimodal optimization. The input data is then compressed in a substitutional manner. Experimental results on five representative NGS data sets show that MMQSC obtains higher compression ratio than the other state-of-the-art methods. Particularly, MMQSC is a lossless reference-free compression algorithm, yet obtains an average compression ratio of 22.82% on the experimental data sets. Conclusions The proposed MMQSC compresses NGS quality score data effectively. It can be utilized to improve the overall compression ratio on FASTQ formatted files. PMID:25474747

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kennedy, R.P.; Kincaid, R.H.; Short, S.A.

This report presents the results of part of a two-task study on the engineering characterization of earthquake ground motion for nuclear power plant design. Task I of the study, which is presented in NUREG/CR-3805, Vol. 1, developed a basis for selecting design response spectra taking into account the characteristics of free-field ground motion found to be significant in causing structural damage. Task II incorporates additional considerations of effects of spatial variations of ground motions and soil-structure interaction on foundation motions and structural response. The results of Task II are presented in four parts: (1) effects of ground motion characteristics onmore » structural response of a typical PWR reactor building with localized nonlinearities and soil-structure interaction effects; (2) empirical data on spatial variations of earthquake ground motion; (3) soil-structure interaction effects on structural response; and (4) summary of conclusions and recommendations based on Tasks I and II studies. This report presents the results of the first part of Task II. The results of the other parts will be presented in NUREG/CR-3805, Vols. 3 to 5.« less

Recent Economic Perspectives on Political Economy, Part II*

PubMed Central

Dewan, Torun; Shepsle, Kenneth A.

2013-01-01

In recent years some of the best theoretical work on the political economy of political institutions and processes has begun surfacing outside the political science mainstream in high quality economics journals. This two-part paper surveys these contributions from a recent five-year period. In Part I, the focus is on elections, voting and information aggregation, followed by treatments of parties, candidates, and coalitions. In Part II, papers on economic performance and redistribution, constitutional design, and incentives, institutions, and the quality of political elites are discussed. Part II concludes with a discussion of the methodological bases common to economics and political science, the way economists have used political science research, and some new themes and arbitrage opportunities. PMID:23606754

2007 Workplace and Equal Opportunity Survey of Reserve Component Members: Administration, Datasets, and Codebook

DTIC Science & Technology

2008-11-01

component, gender, paygrade, race/ethnicity, ethnic ancestry, education , active duty service, and military installation proximity...5. Female Ancestry refers to your ethnic origin or descent, “roots,” or heritage. It may refer to your parents ’ or ancestors’ country of birth...Pay and benefits .............................. Fair performance evaluations ........... Education and training opportunities

2008 Post-Election Survey of Department of State Voting Assistance Officers: Administration, Datasets, and Codebook

DTIC Science & Technology

2009-08-01

useful *************************************************************/ array zara (*) TRAININGA TRAININGB TRAININGC TRAININGD TRAININGE TRAININGF...TRAININGFR TRAININGGR TRAININGHR SRCEINFOAR SRCEINFOBR SRCEINFOCR SRCEINFODR SRCEINFOER; do I = 1 to dim( Zara ); Zarb(i)= Zara (i); if Zara (i...60 then Zarb(i) = .; else Zara (i) = Zarb(i); end; Drop i; I-9 /* coding for TRAININGAR2 variable

22 CFR 129.7 - Prior approval (license).

Code of Federal Regulations, 2010 CFR

2010-04-01

...; (ii) Nuclear weapons strategic delivery systems and all components, parts, accessories, attachments specifically designed for such systems and associated equipment; (iii) Nuclear weapons design and test equipment of a nature described by Category XVI of Part 121; (iv) Naval nuclear propulsion equipment of a...

22 CFR 129.7 - Prior approval (license).

Code of Federal Regulations, 2011 CFR

2011-04-01

...; (ii) Nuclear weapons strategic delivery systems and all components, parts, accessories, attachments specifically designed for such systems and associated equipment; (iii) Nuclear weapons design and test equipment of a nature described by Category XVI of part 121; (iv) Naval nuclear propulsion equipment of a...

Implementation of Head Start Planned Variation: 1970-1971. Part II.

ERIC Educational Resources Information Center

Lukas, Carol Van Deusen; Wohlleb, Cynthia

This volume of appendices is Part II of a study of program implementation in 12 models of Head Start Planned Variation. It presents details of the data analysis, copies of data collection instruments, and additional analyses and statistics. The appendices are: (A) Analysis of Variance Designs, (B) Copies of Instruments, (C) Additional Analyses,…

40 CFR 65.3 - Compliance with standards and operation and maintenance requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

...)(4)(i) and (ii) do not apply to Group 2A or Group 2B process vents. Compliance with design, equipment, work practice, and operational standards, including those for equipment leaks, shall be determined... this part. (5) Design, equipment, work practice, or operational standards. Paragraphs (b)(5)(i) and (ii...

Defense and Development in Sub-Saharan Africa: Codebook.

DTIC Science & Technology

1988-03-01

countries by presenting the different data sources and explaining how they were compiled. The statistics in the 0 database cover 41 African countries for...February 1984, pp. 157-164 -vi Finally, in addition to the economic and military data , some statistics have been compiled that monitor social and...32 IX. SOCIAL/POLITICAL STATISTICS ....................................34 SOURCES AND NOTES ON COLLECTION OF DATA

The 1980 Survey of Certain Unrestricted Line Officers of the Navy Regarding Their Reassignment to a New Position.

DTIC Science & Technology

1981-04-01

variables resulting from the survey and their location on an SPSS system file are documented in a user-oriented codebook. Free responses to an open...and added expense), anguish in transfer of family. (3) The Navy cannot afford to treat people like cattle. If I could have re- signed without a six

2005 Workplace and Equal Opportunity Survey of Active-Duty Members Administration, Datasets, and Codebook

DTIC Science & Technology

2007-06-01

Results .......................................................................17 Table 7. E-mail Address Availability by Active-Duty Service ...the following ten topic areas: 1. Background Information— Service , gender, paygrade, race/ethnicity, ethnic ancestry, and education. 2. Family and...likelihood to stay on active duty, spouse/family support to stay on active duty, years spent in military service , willingness to recommend military

Hispanic Male’s Perspectives of Health Behaviors Related to Weight Management

PubMed Central

Garcia, David O.; Valdez, Luis A.; Hooker, Steven P.

2015-01-01

Hispanic males have the highest prevalence of overweight and obesity among men in the United States; yet are significantly underrepresented in weight loss research. The purpose of the current study was to examine Hispanic male’s perspectives of health behaviors related to weight management to refine the methodologies to deliver a gender-sensitive and culturally sensitive weight loss intervention. From October 2014 to April 2015, semistructured interviews were conducted with 14 overweight Hispanic men of ages 18 to 64 years. The interviews lasted approximately 60 minutes. Participants also completed a brief questionnaire and body weight/height were measured. Grounded in a deductive process, a preliminary codebook was developed based on the topics included in the interview guides. A thematic analysis facilitated the identification of inductive themes and the finalization of the codebook used for transcript analysis. Four overarching themes were identified: (a) general health beliefs of how diet and physical activity behaviors affect health outcomes, (b) barriers to healthy eating and physical activity, (c) motivators for change, and (d) viable recruitment and intervention approaches. Future research should examine feasible and appropriate recruitment and intervention strategies identified by Hispanic males to improve weight management in this vulnerable group. PMID:26634854

Subway Environmental Design Handbook, Volume II, Subway Environment Simulation Computer Program, Version 4, Part 1, User's Manual

DOT National Transportation Integrated Search

1975-10-01

This document forms part of the Subway Environmental Design Handbook. It contains the background information and instructions to enable an engineer to perform an analysis of a subway system by using the Subway Environment Simulation (SES) computer pr...

24 CFR 598.1 - Applicability and scope.

Code of Federal Regulations, 2014 CFR

2014-04-01

... URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS General... the second and third rounds of designations of urban Empowerment Zones, authorized under Subchapter U... requirement of, Round II in this part is also a reference to, or requirement of, Round III. (b) This part...

24 CFR 598.1 - Applicability and scope.

Code of Federal Regulations, 2013 CFR

2013-04-01

... URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS General... the second and third rounds of designations of urban Empowerment Zones, authorized under Subchapter U... requirement of, Round II in this part is also a reference to, or requirement of, Round III. (b) This part...

24 CFR 598.1 - Applicability and scope.

Code of Federal Regulations, 2012 CFR

2012-04-01

... URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS General... the second and third rounds of designations of urban Empowerment Zones, authorized under Subchapter U... requirement of, Round II in this part is also a reference to, or requirement of, Round III. (b) This part...

Does the Cultural Formulation Interview (CFI) for the Fifth Revision of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) affect medical communication? A qualitative exploratory study from the New York site

PubMed Central

Aggarwal, Neil K.; DeSilva, Ravi; Nicasio, Andel V.; Boiler, Marit; Lewis-Fernández, Roberto

2014-01-01

Objectives Cross-cultural mental health researchers often analyze patient explanatory models of illness to optimize service provision. The Cultural Formulation Interview (CFI) is a cross-cultural assessment tool released in May 2013 with DSM-5 to revise shortcomings from the DSM-IV Outline for Cultural Formulation (OCF). The CFI field trial took place in 6 countries, 14 sites, and with 321 patients to explore its feasibility, acceptability, and clinical utility with patients and clinicians. We sought to analyze if and how CFI feasibility, acceptability, and clinical utility were related to patient-clinician communication. Design We report data from the New York site which enrolled 7 clinicians and 32 patients in 32 patient-clinician dyads. We undertook a data analysis independent of the parent field trial by conducting content analyses of debriefing interviews with all participants (n=64) based on codebooks derived from frameworks for medical communication and implementation outcomes. Three coders created codebooks, coded independently, established inter-rater coding reliability, and analyzed if the CFI affects medical communication with respect to feasibility, acceptability, and clinical utility. Results Despite racial, ethnic, cultural, and professional differences within our group of patients and clinicians, we found that promoting satisfaction through the interview, eliciting data, eliciting the patient’s perspective, and perceiving data at multiple levels were common codes that explained how the CFI affected medical communication. We also found that all but 2 codes fell under the implementation outcome of clinical utility, 2 fell under acceptability, and none fell under feasibility. Conclusion Our study offers new directions for research on how a cultural interview affects patient-clinician communication. Future research can analyze how the CFI and other cultural interviews impact medical communication in clinical settings with subsequent effects on outcomes such as medication adherence, appointment retention, and health condition. PMID:25372242

Fire prevention on airplanes. Part II

NASA Technical Reports Server (NTRS)

Sabatier, J

1929-01-01

This part of the report presents a detailed examination of spark prevention, fire extinguishers, and fuel tank location and design. A continued program of investigations and research is also proposed.

A State Articulated Instructional Objectives Guide for Occupational Education Programs. State Pilot Model for Drafting (Graphic Communications). Part I--Basic. Part II--Specialty Programs. Section A (Mechanical Drafting and Design). Section B (Architectural Drafting and Design).

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

A two-part articulation instructional objective guide for drafting (graphic communications) is provided. Part I contains summary information on seven blocks (courses) of instruction. They are as follow: introduction; basic technical drafting; problem solving in graphics; reproduction processes; freehand drawing and sketching; graphics composition;…

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XXVII, I--CATERPILLAR STARTING (PONEY) ENGINE (PART I), II--LEARNING ABOUT BRAKES (PART II).

ERIC Educational Resources Information Center

Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE CONSTRUCTION AND OPERATION OF DIESEL ENGINE STARTING ENGINES AND BRAKE SYSTEMS USED ON DIESEL POWERED VEHICLES. TOPICS ARE (1) GENERAL DESCRIPTION, (2) OPERATION, (3) COMBUSTION SPACE AND VALVE ARRANGEMENT (STARTING ENGINES), (4) TYPES OF BRAKES, AND (5) DOUBLE…

World War II Unit. Using Primary Sources in the Classroom.

ERIC Educational Resources Information Center

Alabama Dept. of Archives and History, Montgomery.

This teaching unit, "World War II Unit," is the ninth in a series of 10 units about Alabama state history, part of a project designed to help teachers integrate the use of primary source materials into their classrooms. Although the units are designed to augment the study of Alabama, they are useful in the study of U.S. history, world…

Education Longitudinal Study of 2002: Base Year Data File User's Manual. NCES 2004-405

ERIC Educational Resources Information Center

Ingels, Steven J.; Pratt, Daniel J.; Rogers, James E.; Siegel, Peter H.; Stutts, Ellen S.

2004-01-01

This manual has been produced to familiarize data users with the procedures followed for data collection and processing for the base year of the Education Longitudinal Study of 2002 (ELS:2002). It also provides the necessary documentation for use of the public-use data files, as they appear on the ELS:2002 base year Electronic Codebook (ECB). Most…

2000 Military Recruiter Survey: Administration, Datasets and Codebook

DTIC Science & Technology

2002-08-01

recruiters who have not learned everything necessary from their training…………………...... f. Recruiters need constant pressure in order for them to make their...Distance learning ......................... j. Filling out electronic forms........... k. Other........................................... Background...e. It is my job to teach recruiters who have not learned everything necessary from their training…………………...... f. Recruiters need constant

Collective Beer Brand Identity: A Semiotic Analysis of the Websites Representing Small and Medium Enterprises in the Brewing Industry of Western PA

ERIC Educational Resources Information Center

Cincotta, Dominic

2014-01-01

This research studies how brand identities, individually and communally, as read through websites are created among small and medium-sized enterprise breweries in western Pennsylvania. Content analysis through the frame of Kress and van Leeuwen was used as the basis for the codebook that reads each brand identity for the researcher. The…

Teacher Followup Survey, 1994-95: Data File User's Manual Restricted-Use Codebook. Working Paper Series.

ERIC Educational Resources Information Center

Whitener, Summer D.; Gruber, Kerry J.; Rohr, Carol L.; Fondelier, Sharon E.

The Teacher Followup Survey (TFS) is a 1-year followup of a sample of teachers who were originally selected for the Teacher Questionnaire of the Schools and Staffing Survey (SASS) of the National Center for Education Statistics. There have been three data cycles for the SASS and three TFS versions. This data file user's manual enables the user to…

Getting More Value from the LibQUAL+® Survey: The Merits of Qualitative Analysis and Importance-Satisfaction Matrices in Assessing Library Patron Comments

ERIC Educational Resources Information Center

Detlor, Brian; Ball, Kathryn

2015-01-01

This paper examines the merit of conducting a qualitative analysis of LibQUAL+® survey comments as a means of leveraging quantitative LibQUAL+ results, and using importance-satisfaction matrices to present and assess qualitative findings. Comments collected from the authors' institution's LibQUAL+ survey were analyzed using a codebook based on…

August 2005 Status of Forces Survey of Active-Duty Members: Administration, Datasets, and Codebook

DTIC Science & Technology

2005-09-01

14. Military/Civilian Comparisons—Comparisons of military to the civilian world , including promotion opportunities, hours worked, compensation...MILITARY/CIVILIAN COMPARISONS 110. How do the following opportunities in the military compare to opportunities in the civilian world ? Much...opportunities in the military compare to opportunities in the civilian world ? Much better as a civilian Somewhat better as a civilian No

75 FR 2935 - Extension of Deadline for Promulgating Designations for the 2008 Ozone National Ambient Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-19

... Part II Environmental Protection Agency 40 CFR Parts 50, 58 and 81 Ozone National Ambient Air... 2008 Ozone National Ambient Air Quality Standards AGENCY: Environmental Protection Agency (EPA). ACTION... designations for the ozone national ambient air quality standards (NAAQS) that were promulgated in March 2008...

SPECIFICATION AND UTILIZATION OF A TRANSFORMATIONAL GRAMMAR.

ERIC Educational Resources Information Center

LIEBERMAN, D.; AND OTHERS

SCIENTIFIC REPORT NO. 1 OF THIS PROJECT CONTAINS FOUR PARTS. THE FIRST, BY P. ROSENBAUM AND D. LOCHAK, PRESENTS AND EXPLAINS THE "IBM CORE GRAMMAR OF ENGLISH" AND GIVES A SET OF 66 DERIVATIONS CONSTRUCTED IN TERMS OF THE CORE GRAMMAR. PART II, "DESIGN OF A GRAMMAR TESTER" BY D. LIEBERMAN, SUMMARIZES THE DESIGN CONSIDERATIONS OF…

28 CFR 11.8 - Salary offset.

Code of Federal Regulations, 2010 CFR

2010-07-01

... appropriate under 5 U.S.C. chapter 75, 5 CFR part 752, or any other applicable statutes or regulations; (ii... offset coordination officer will notify the employee of the location and time when the employee may... of the paying agency, as designated in 5 CFR part 581, appendix A, or as otherwise designated by the...

Effects of designed learning strategies to enhance biology students' understanding of the nature of science

NASA Astrophysics Data System (ADS)

Reeves, Carolyn T.

This research attempted to test the effectiveness of strategies designed for teaching the nature of science to Biology I students and to examine the effects of frequency of use of the strategies. Some strategies were designed to identify misconceptions about the nature of science; others were designed to correct misconceptions or provide correct concepts about the nature of science. This research commenced during the 3rd week of the 2001--2002 school year after obtaining IRB approval and permissions from school officials. The study ended after the 15th week. All participating students were given a pretest and a posttest of the Nature of Scientific Knowledge Scale Enhanced (NSKSE) test. Part I, 48 items, consisted of the NSKS test by Rubba & Anderson (1978). Part II, 10 items, consisted of a test constructed by the researcher. Part I contained questions about 6 tenets of the nature of science. Part II contained questions about how science works. The strategies were tested in two Biology I experimental classes, n = 41, and compared with two Biology I control classes, n = 34, by means of an analysis of covariance with the pretest scores used as the covariate. The overall mean posttest scores of the experimental and the control group were not found to be significantly different on either Part I, F(1,72) = 1.059, p = .307, or Part II, F(1,72) = 3.136, p = .081, of the test instrument. The number of times a strategy was used in each experimental classroom was determined. It was found that strategies were used almost twice as often in one classroom than in the other. A second set of ANCOVA analyses compared mean scores between Experimental Class A, Experimental Class B, and the control group. There was no significant difference between the groups on Part I, F(2,71) = .921, p = .403, but the difference between groups on Part II, F(2,71) = 5.769, p = .005, was significant. A post hoc Scheffe analysis showed that the class using strategies most often differed significantly with the control group, p = .009, but the other class did not, p = .929. This study suggests that frequent use of the designed strategies was effective in helping Biology I students understand some aspects of the nature of science. It also suggests that minimal use of the strategies was not effective.

EBR-II high-ramp transients under computer control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Forrester, R.J.; Larson, H.A.; Christensen, L.J.

1983-01-01

During reactor run 122, EBR-II was subjected to 13 computer-controlled overpower transients at ramps of 4 MWt/s to qualify the facility and fuel for transient testing of LMFBR oxide fuels as part of the EBR-II operational-reliability-testing (ORT) program. A computer-controlled automatic control-rod drive system (ACRDS), designed by EBR-II personnel, permitted automatic control on demand power during the transients.

Redesign of the End Group in the 3.9 GHz LCLS-II Cavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lunin, Andrei; Gonin, Ivan; Khabiboulline, Timergali

Development and production of Linac Coherent Light Source II (LCLS-II) is underway. The central part of LCLS-II is a continuous wave superconducting RF (CW SCRF) electron linac. The 3.9 GHz third harmonic cavity similar to the XFEL design will be used in LCLS-II for linearizing the longitudinal beam profile*. The initial design of the 3.9 GHz cavity developed for XFEL project has a large, 40 mm, beam pipe aperture for better higher-order mode (HOM) damping. It is resulted in dipole HOMs with frequencies nearby the operating mode, which causes difficulties with HOM coupler notch filter tuning. The CW linac operationmore » requires an extra caution in the design of the HOM coupler in order to prevent its possible overheating. In this paper we present the modified 3.9 GHz cavity End Group for meeting the LCLS-II requirements« less

Truck characteristics for use in highway design and operation. Volume II, Appendices

DOT National Transportation Integrated Search

1990-08-01

Highway geometric design and traffic operations are based in part on consideration of vehicle characteristics. However, many of the current highway design and operational criteria are based on passenger car characteristics, even though truck characte...

Prenatal Care.

ERIC Educational Resources Information Center

Health Resources and Services Administration (DHHS/PHS), Rockville, MD. Office for Maternal and Child Health Services.

This booklet is the first in a series of publications designed to provide parents with useful information about childrearing. Contents are organized into three parts. Part I focuses on the pregnancy, prenatal care, development of the baby, pregnant lifestyles, nutrition, common discomforts, and problems of pregnancy. Part II provides information…

1979 Reserve Force Studies Surveys: User’s Manual and Codebooks.

DTIC Science & Technology

1981-09-01

units, for instance, artillery, which have the same manpower demand characteristics (similar size, skills and grade structure) provided better...personnel groups. With random cluster sampling, the pattern of questionnaire returns for each group of analytic interest should match the Guard and...marking the matching bubbles. First, although the instructions ask the respondent to "zero-fill" and "right-justify," some respondents entered the value

Information preserving coding for multispectral data

NASA Technical Reports Server (NTRS)

Duan, J. R.; Wintz, P. A.

1973-01-01

A general formulation of the data compression system is presented. A method of instantaneous expansion of quantization levels by reserving two codewords in the codebook to perform a folding over in quantization is implemented for error free coding of data with incomplete knowledge of the probability density function. Results for simple DPCM with folding and an adaptive transform coding technique followed by a DPCM technique are compared using ERTS-1 data.

August 2004 Status of Forces Survey of Active-Duty Members: Administration, Datasets, and Codebook

DTIC Science & Technology

2005-01-01

exercising, and self-reported weight (i.e., underweight or overweight ). 11. Compensation—Present versus alternative retirement pay systems; present...South Africa) nmlkjWestern Hemisphere (e.g., Cuba, Honduras, Peru ) nmlkjOther or not sure BACKGROUND INFORMATION Please select from the list...South Africa) nmlkjWestern Hemisphere (e.g., Cuba, Honduras, Peru ) nmlkjOther or not sure TEMPO, READINESS, AND STRESS Please select from

1986 Proteus Survey: Technical Manual and Codebook

DTIC Science & Technology

1992-06-01

Officer Candidate School and Direct Commission) and by gender. Female officers were oversampled (30% in the sample versus ap- proximately 16% in the...analyze the effects of this change in policy both on the individual cadets and on the Academy and to study the process of coeducation over four years...Candidate School (OCS), and Direct Commissioning (DC). Approximately 1,000 officers were randomly selected from each commissioning year group 1980-1984 from

SIFT Meets CNN: A Decade Survey of Instance Retrieval.

PubMed

Zheng, Liang; Yang, Yi; Tian, Qi

2018-05-01

In the early days, content-based image retrieval (CBIR) was studied with global features. Since 2003, image retrieval based on local descriptors (de facto SIFT) has been extensively studied for over a decade due to the advantage of SIFT in dealing with image transformations. Recently, image representations based on the convolutional neural network (CNN) have attracted increasing interest in the community and demonstrated impressive performance. Given this time of rapid evolution, this article provides a comprehensive survey of instance retrieval over the last decade. Two broad categories, SIFT-based and CNN-based methods, are presented. For the former, according to the codebook size, we organize the literature into using large/medium-sized/small codebooks. For the latter, we discuss three lines of methods, i.e., using pre-trained or fine-tuned CNN models, and hybrid methods. The first two perform a single-pass of an image to the network, while the last category employs a patch-based feature extraction scheme. This survey presents milestones in modern instance retrieval, reviews a broad selection of previous works in different categories, and provides insights on the connection between SIFT and CNN-based methods. After analyzing and comparing retrieval performance of different categories on several datasets, we discuss promising directions towards generic and specialized instance retrieval.

Interframe vector wavelet coding technique

NASA Astrophysics Data System (ADS)

Wus, John P.; Li, Weiping

1997-01-01

Wavelet coding is often used to divide an image into multi- resolution wavelet coefficients which are quantized and coded. By 'vectorizing' scalar wavelet coding and combining this with vector quantization (VQ), vector wavelet coding (VWC) can be implemented. Using a finite number of states, finite-state vector quantization (FSVQ) takes advantage of the similarity between frames by incorporating memory into the video coding system. Lattice VQ eliminates the potential mismatch that could occur using pre-trained VQ codebooks. It also eliminates the need for codebook storage in the VQ process, thereby creating a more robust coding system. Therefore, by using the VWC coding method in conjunction with the FSVQ system and lattice VQ, the formulation of a high quality very low bit rate coding systems is proposed. A coding system using a simple FSVQ system where the current state is determined by the previous channel symbol only is developed. To achieve a higher degree of compression, a tree-like FSVQ system is implemented. The groupings are done in this tree-like structure from the lower subbands to the higher subbands in order to exploit the nature of subband analysis in terms of the parent-child relationship. Class A and Class B video sequences from the MPEG-IV testing evaluations are used in the evaluation of this coding method.

Content-based retrieval of historical Ottoman documents stored as textual images.

PubMed

Saykol, Ediz; Sinop, Ali Kemal; Güdükbay, Ugur; Ulusoy, Ozgür; Cetin, A Enis

2004-03-01

There is an accelerating demand to access the visual content of documents stored in historical and cultural archives. Availability of electronic imaging tools and effective image processing techniques makes it feasible to process the multimedia data in large databases. In this paper, a framework for content-based retrieval of historical documents in the Ottoman Empire archives is presented. The documents are stored as textual images, which are compressed by constructing a library of symbols occurring in a document, and the symbols in the original image are then replaced with pointers into the codebook to obtain a compressed representation of the image. The features in wavelet and spatial domain based on angular and distance span of shapes are used to extract the symbols. In order to make content-based retrieval in historical archives, a query is specified as a rectangular region in an input image and the same symbol-extraction process is applied to the query region. The queries are processed on the codebook of documents and the query images are identified in the resulting documents using the pointers in textual images. The querying process does not require decompression of images. The new content-based retrieval framework is also applicable to many other document archives using different scripts.

46 CFR 162.060-34 - Test Report requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... conditions; (2) Experimental design; (3) Methods and procedures; and (4) Results and discussion. (f... requirements of 33 CFR part 151, subparts C and D; (ii) Is designed and constructed according to the...

46 CFR 162.060-34 - Test Report requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... conditions; (2) Experimental design; (3) Methods and procedures; and (4) Results and discussion. (f... requirements of 33 CFR part 151, subparts C and D; (ii) Is designed and constructed according to the...

46 CFR 162.060-34 - Test Report requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... conditions; (2) Experimental design; (3) Methods and procedures; and (4) Results and discussion. (f... requirements of 33 CFR part 151, subparts C and D; (ii) Is designed and constructed according to the...

Voltages induced by lightning strokes and ground-faults on a coaxial telecom circuit enclosed inside a composite earthwire. Part II: lightning induced voltages ant composite earthwire tehnical design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anzanel, P.; Kouteynikoff, P.

1985-02-01

This Part II presents theorical and experimental work about interference generated by lightning strokes in a telecommunication coaxial circuit enclosed inside a composite earthwire for overhead transmission lines. Sinusoidal steady state and surge measurements of the composite earthwire susceptibility to interference (transfer impedance) have been carried out. Induced voltages have been calculated using an original double sampling FFT method whose validity has been checked by measurements on a test line. Finally, it is shown how the cable design can be improved and maximum induced voltage values are given.

Single Crystal Diffractometry

NASA Astrophysics Data System (ADS)

Arndt, U. W.; Willis, B. T. M.

2009-06-01

Preface; Acknowledgements; Part I. Introduction; Part II. Diffraction Geometry; Part III. The Design of Diffractometers; Part IV. Detectors; Part V. Electronic Circuits; Part VI. The Production of the Primary Beam (X-rays); Part VII. The Production of the Primary Beam (Neutrons); Part VIII. The Background; Part IX. Systematic Errors in Measuring Relative Integrated Intensities; Part X. Procedure for Measuring Integrated Intensities; Part XI. Derivation and Accuracy of Structure Factors; Part XII. Computer Programs and On-line Control; Appendix; References; Index.

Market-Based Coordination of Thermostatically Controlled Loads—Part II: Unknown Parameters and Case Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Sen; Zhang, Wei; Lian, Jianming

This two-part paper considers the coordination of a population of Thermostatically Controlled Loads (TCLs) with unknown parameters to achieve group objectives. The problem involves designing the bidding and market clearing strategy to motivate self-interested users to realize efficient energy allocation subject to a peak power constraint. The companion paper (Part I) formulates the problem and proposes a load coordination framework using the mechanism design approach. To address the unknown parameters, Part II of this paper presents a joint state and parameter estimation framework based on the expectation maximization algorithm. The overall framework is then validated using real-world weather data andmore » price data, and is compared with other approaches in terms of aggregated power response. Simulation results indicate that our coordination framework can effectively improve the efficiency of the power grid operations and reduce power congestion at key times.« less

Movement Analysis Applied to the Basketball Jump Shot--Part II.

ERIC Educational Resources Information Center

Martin, Thomas P.

1981-01-01

The jump shot is one of the most important shots in the game of basketball. The movement analysis of the jump shot designates four phases: (1) preparatory position; (2) movement phase I (crouch); (3) movement phase II (jump); and (4) follow-through. (JN)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Discussion Session - Accelerator System Design (Part II) Tutors: C. Darve, J. Weisend II, Ph. Lebrun, A. Dabrowski, U. Raich Video Conference with the CERN Control Center. Experts in the field of Accelerator science will be available to answer the students questions. This session will link the CCC and SA (using Codec VC).

Association Between National Board Dental Examination Part II Scores and Comprehensive Examinations at Harvard School of Dental Medicine.

PubMed

Lee, Min Kyeong; Allareddy, Veerasathpurush; Howell, T Howard; Karimbux, Nadeem Y

2011-01-01

Harvard School of Dental Medicine (HSDM) uses a hybrid problem-based approach to teaching in the predoctoral program. The objective structured clinical examination (OSCE) is a formative examination designed to assess the performance of students in the problem-based learning (PBL) curriculum. At HSDM three comprehensive examinations with OSCE components are administered during the third and fourth years of clinical training. The National Board Dental Examination (NBDE) Part II is taken in the final year of the predoctoral program. This study examines the association between the NBDE Part II and the comprehensive exams held at HSDM. Predoctoral students from the HSDM classes of 2005 and 2006 were included in this study. The outcome variable of interest was the scores obtained by students in the NBDE Part II, and the main independent variable of interest was the performance of students in the comprehensive exams (honors, pass, make-up exam to pass). The Mann-Whitney U-test was used to examine the association between the grades obtained in the each of the three comprehensive exams and the NBDE Part II scores. Multivariable linear regression analysis was also used to examine the association between the NBDE Part II scores and the comprehensive exam grades. The effect of potential confounding factors including age, sex, and race/ethnicity was adjusted. The results suggest that students who performed well in the comprehensive exams performed better on the NBDE Part II, even after adjusting for confounding factors. Future studies will examine the long-term impact of PBL on postdoctoral plans and career choices.

Individualized Learning Course Evaluation Guidelines.

ERIC Educational Resources Information Center

Bauer, Barbara T.; Everett, Robert L.

These guidelines provide standards for evaluators to estimate the quality of courses being considered for use in the Individualized Learning Center at Bell Telephone Laboratories. There are three parts. Part I guides the course evaluator through the evaluation of course materials, including course design and structure implementation. Part II is a…

A Playground for All Children. Book 1: User Groups and Site Selection. Book 2: Design Competition Program.

ERIC Educational Resources Information Center

New York City Dept. of City Planning, NY.

These booklets, parts I and II of a three-part series, describe in detail issues related to the future development of an innovative outdoor public playground especially designed for integrated play between handicapped and able-bodied children. The first booklet describes potential user groups--the types of children who are expected to use the…

Recent Economic Perspectives on Political Economy, Part I*

PubMed Central

Dewan, Torun; Shepsle, Kenneth A.

2013-01-01

In recent years some of the best theoretical work on the political economy of political institutions and processes has begun surfacing outside the political science mainstream in high quality economics journals. This two-part paper surveys these contributions from a recent five-year period. In Part I, the focus is on elections, voting and information aggregation, followed by treatments of parties, candidates, and coalitions. In Part II, papers on economic performance and redistribution, constitutional design, and incentives, institutions, and the quality of political elites are discussed. Part II concludes with a discussion of the methodological bases common to economics and political science, the way economists have used political science research, and some new themes and arbitrage opportunities. PMID:23990686

Proteus Survey: Technical Manual and Codebook

DTIC Science & Technology

1992-06-01

Reserve Officer Training Corp, 20% from Officer Candidate School and Direct Commission) and by gender . Female officers were supposed to be oversampled...stratified by source of commission (40% USMA, 40% ROTC, 20% OCS and DC) and by gender , as in previous years. A total of approximately 7,000 surveys were...for the 1987 Proteus Survey and the population percentages from the OLRDB for each of the key strata ( gender and source of commission) reportedly used

40 CFR 86.1809-12 - Prohibition of defeat devices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... manufacturer must provide an explanation containing detailed information regarding test programs, engineering evaluations, design specifications, calibrations, on-board computer algorithms, and design strategies..., with the Part II certification application, an engineering evaluation demonstrating to the satisfaction...

[Evaluation of Livestock Carcasses and Performance.] Student Materials. V.A. III. [II-B-1 through II-B-2; II-D-1].

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

Part of a series of eight student learning modules in vocational agriculture, this booklet deals with evaluation of livestock. It contains sections on carcass evaluation, the evaluation of performance and production, and the design of livestock production facilities. Each of the first two sections has a glossary, and all three conclude with a…

Astronomy Books of 1984: Part II--The Technical List.

ERIC Educational Resources Information Center

Fraknoi, Andrew

1985-01-01

An annotated bibliography of astronomy books is presented. These books (most of which are designed for research astronomers and graduate students) demand substantial background in astronomy and physics. Nontechnical books are reviewed in part I (SE 537 910). (JN)

The PIP-II Conceptual Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ball, M.; Burov, A.; Chase, B.

2017-03-01

The Proton Improvement Plan-II (PIP-II) encompasses a set of upgrades and improvements to the Fermilab accelerator complex aimed at supporting a world-leading neutrino program over the next several decades. PIP-II is an integral part of the strategic plan for U.S. High Energy Physics as described in the Particle Physics Project Prioritization Panel (P5) report of May 2014 and formalized through the Mission Need Statement approved in November 2015. As an immediate goal, PIP-II is focused on upgrades to the Fermilab accelerator complex capable of providing proton beam power in excess of 1 MW on target at the initiation of themore » Long Baseline Neutrino Facility/Deep Underground Neutrino Experiment (LBNF/DUNE) program, currently anticipated for the mid- 2020s. PIP-II is a part of a longer-term goal of establishing a high-intensity proton facility that is unique within the world, ultimately leading to multi-MW capabilities at Fermilab....« less

The influence of cutting-bill requirements on lumber yield using a fractional-factorial design part II, correlation and number of part sizes

Treesearch

Urs Buehlmann; D. Earl Kline; Janice K. Wiedenbeck; R., Jr. Noble

2008-01-01

Cutting-bill requirements, among other factors, influence the yield obtained when cutting lumber into parts. The first part of this 2-part series described how different cutting-bill part sizes, when added to an existing cutting-bill, affect lumber yield, and quantified these observations. To accomplish this, the study employed linear least squares estimation technique...

Secondary Special Education. Part I: The "Stepping Stone Model" Designed for Secondary Learning Disabled Students. Part II: Adapting Materials and Curriculum.

ERIC Educational Resources Information Center

Fox, Barbara

The paper describes the Stepping Stone Model, a model for the remediation and mainstreaming of secondary learning disabled students and the adaptation of curriculum and materials for the model. The Stepping Stone Model is designed to establish the independence of students in the mainstream through content reading. Five areas of concern common to…

40 CFR 86.1809-10 - Prohibition of defeat devices.

Code of Federal Regulations, 2012 CFR

2012-07-01

... detailed information regarding test programs, engineering evaluations, design specifications, calibrations, on-board computer algorithms, and design strategies incorporated for operation both during and... HLDT/MDPVs the manufacturer must submit, with the Part II certification application, an engineering...

Get the Most out of Your AV System Dollar. Part II

ERIC Educational Resources Information Center

Wadsworth, Raymond H.

1974-01-01

Describes how to save money when designing AV facilities; excellent viewing from all seats is achieved by applying certain basic principles to the design of the room and the selection of the equipment. (Author/MLF)

Guide to Black Politics 1976, Part II: The Republican National Convention, Kansas City, Missouri, August 16-19, 1976.

ERIC Educational Resources Information Center

Joint Center for Political Studies, Washington, DC.

This guide was designed to assist black delegates attending the 1976 Republican National Convention. The guide is divided into four main parts. The first part contains information on convention procedures, convention committees, and various aspects of black participation in politics. The second and third parts include the names of delegates to the…

Student System, On-Line Admissions.

ERIC Educational Resources Information Center

White, Stephen R.

This report provides technical information on an on-line admissions system developed by Montgomery College. Part I, Systems Development, describes the background, objectives and responsibilities, system design, and reports generated by the system. Part II, Operating Instructions, describes input forms and controls, admission system functions, file…

Topics in Finance: Part II--Financial Analysis

ERIC Educational Resources Information Center

Laux, Judy

2010-01-01

The second article in a series designed to supplement the introductory financial management course, this essay addresses financial statement analysis, including its impact on stock valuation, disclosure, and managerial behavior. [For "Topics in Finance Part I--Introduction and Stockholder Wealth Maximization," see EJ1060345.

Application of a VLSI vector quantization processor to real-time speech coding

NASA Technical Reports Server (NTRS)

Davidson, G.; Gersho, A.

1986-01-01

Attention is given to a working vector quantization processor for speech coding that is based on a first-generation VLSI chip which efficiently performs the pattern-matching operation needed for the codebook search process (CPS). Using this chip, the CPS architecture has been successfully incorporated into a compact, single-board Vector PCM implementation operating at 7-18 kbits/sec. A real time Adaptive Vector Predictive Coder system using the CPS has also been implemented.

Early Childhood Longitudinal Study, Kindergarten Class of 2010-11 (ECLS-K:2011): User's Manual for the ECLS-K:2011 Kindergarten-Second Grade Data File and Electronic Codebook, Public Version. NCES 2017-285

ERIC Educational Resources Information Center

Tourangeau, Karen; Nord, Christine; Lê, Thanh; Wallner-Allen, Kathleen; Vaden-Kiernan, Nancy; Blaker, Lisa; Najarian, Michelle

2017-01-01

This manual provides guidance and documentation for users of the longitudinal kindergarten-second grade (K-2) data file of the Early Childhood Longitudinal Study, Kindergarten Class of 2010-11 (ECLS-K:2011). It mainly provides information specific to the second-grade rounds of data collection. Users should refer to the "Early Childhood…

2013 Workplace and Equal Opportunity Survey of Active Duty Members: Administration, Datasets, and Codebook

DTIC Science & Technology

2016-05-01

and Kroeger (2002) provide details on sampling and weighting. Following the summary of the survey methodology is a description of the survey analysis... description of priority, for the ADDRESS file). At any given time, the current address used corresponded to the address number with the highest priority...types of address updates provided by the postal service. They are detailed below; each includes a description of the processing steps. 1. Postal Non

Early Childhood Longitudinal Study, Kindergarten Class of 2010-11 (ECLS-K:2011). User's Manual for the ECLS-K:2011 Kindergarten Data File and Electronic Codebook, Public Version. NCES 2015-074

ERIC Educational Resources Information Center

Tourangeau, Karen; Nord, Christine; Lê, Thanh; Sorongon, Alberto G.; Hagedorn, Mary C.; Daly, Peggy; Najarian, Michelle

2015-01-01

This manual provides guidance and documentation for users of the kindergarten (or base year) data of the Early Childhood Longitudinal Study, Kindergarten Class of 2010-11 (ECLS-K:2011). It begins with an overview of the ECLS-K:2011. Subsequent chapters provide details on the study data collection instruments and methods; the direct and indirect…

2006 Workplace and Gender Relations Survey of Active Duty Members: Administration, Datasets, and Codebook

DTIC Science & Technology

2010-12-01

education , time at sea, and field exercises/alerts. 10. In the past 12 months, how many nights have you been away from your permanent duty station...nmlkj nmlkj b. A friend? nmlkj nmlkj nmlkj c. A family member (e.g., parent , brother/sister)? nmlkj nmlkj nmlkj d. A chaplain...nmlkj nmlkj b. A friend? nmlkj nmlkj nmlkj c. A family member (e.g., parent , brother/sister)? nmlkj nmlkj nmlkj d. A chaplain

Early Childhood Longitudinal Study, Kindergarten Class of 2010-11 (ECLS-K:2011): User's Manual for the ECLS-K:2011 Kindergarten-Fourth Grade Data File and Electronic Codebook, Public Version. NCES 2018-032

ERIC Educational Resources Information Center

Tourangeau, Karen; Nord, Christine; Lê, Thanh; Wallner-Allen, Kathleen; Vaden-Kiernan, Nancy; Blaker, Lisa; Najarian, Michelle

2018-01-01

This manual provides guidance and documentation for users of the longitudinal kindergarten-fourth grade (K-4) data file of the Early Childhood Longitudinal Study, Kindergarten Class of 2010-11 (ECLS-K:2011). It mainly provides information specific to the fourth-grade round of data collection. The first chapter provides an overview of the…

1999 Survey of Active Duty Personnel: Administration, Datasets, and Codebook

DTIC Science & Technology

2000-12-01

but left key items blank. These surveys were treated as nonrespondents when at least one item in each of the Questions 39, 50, and 52 were not...be useable, a questionnaire had to have at least one item in each of the questions 39, 50 and 52 answered. 27 These two subgroups of records are...1988). Mail survey response rate: A meta-analysis of selected techniques for inducing response. Public Opinion Quarterly, 52 , 467-491. Francisco, C

Advance of the Black Flags: Symbolism, Social Identity, and Psychological Operations in Violent Conflict

DTIC Science & Technology

2015-12-01

priorities. Cross points out that even the definition of music itself is somewhat subjective, as sound, rhythm, melody, and even body movement ...to disrupt the conditions that allow a violent enemy to develop . The literature indicates that music is a universal social phenomenon. Music is a...Upon viewing the sample films and videos and listening to the music samples, a set of codes was developed and organized into a codebook in order

Context-Aware Local Binary Feature Learning for Face Recognition.

PubMed

Duan, Yueqi; Lu, Jiwen; Feng, Jianjiang; Zhou, Jie

2018-05-01

In this paper, we propose a context-aware local binary feature learning (CA-LBFL) method for face recognition. Unlike existing learning-based local face descriptors such as discriminant face descriptor (DFD) and compact binary face descriptor (CBFD) which learn each feature code individually, our CA-LBFL exploits the contextual information of adjacent bits by constraining the number of shifts from different binary bits, so that more robust information can be exploited for face representation. Given a face image, we first extract pixel difference vectors (PDV) in local patches, and learn a discriminative mapping in an unsupervised manner to project each pixel difference vector into a context-aware binary vector. Then, we perform clustering on the learned binary codes to construct a codebook, and extract a histogram feature for each face image with the learned codebook as the final representation. In order to exploit local information from different scales, we propose a context-aware local binary multi-scale feature learning (CA-LBMFL) method to jointly learn multiple projection matrices for face representation. To make the proposed methods applicable for heterogeneous face recognition, we present a coupled CA-LBFL (C-CA-LBFL) method and a coupled CA-LBMFL (C-CA-LBMFL) method to reduce the modality gap of corresponding heterogeneous faces in the feature level, respectively. Extensive experimental results on four widely used face datasets clearly show that our methods outperform most state-of-the-art face descriptors.

Iris Image Classification Based on Hierarchical Visual Codebook.

PubMed

Zhenan Sun; Hui Zhang; Tieniu Tan; Jianyu Wang

2014-06-01

Iris recognition as a reliable method for personal identification has been well-studied with the objective to assign the class label of each iris image to a unique subject. In contrast, iris image classification aims to classify an iris image to an application specific category, e.g., iris liveness detection (classification of genuine and fake iris images), race classification (e.g., classification of iris images of Asian and non-Asian subjects), coarse-to-fine iris identification (classification of all iris images in the central database into multiple categories). This paper proposes a general framework for iris image classification based on texture analysis. A novel texture pattern representation method called Hierarchical Visual Codebook (HVC) is proposed to encode the texture primitives of iris images. The proposed HVC method is an integration of two existing Bag-of-Words models, namely Vocabulary Tree (VT), and Locality-constrained Linear Coding (LLC). The HVC adopts a coarse-to-fine visual coding strategy and takes advantages of both VT and LLC for accurate and sparse representation of iris texture. Extensive experimental results demonstrate that the proposed iris image classification method achieves state-of-the-art performance for iris liveness detection, race classification, and coarse-to-fine iris identification. A comprehensive fake iris image database simulating four types of iris spoof attacks is developed as the benchmark for research of iris liveness detection.

Sampled Data Adaptive Digital Computer Control of Surface Ship Maneuvers

DTIC Science & Technology

1976-06-01

0.53 feet. Systems fcr which fuel considerations are not a motivating 157 factor lay te designed without this part of the control law ta allow finer...COXXXQXxaQXQ«^2Q£>’^ o>- —,>->>>ozor X < a. Ps4 <i i— « aC _J o < a o-*»-» ujOO • •>- o • •oo«mo z o «j II II ** » < ii ii -^ -* -,-^a:- i—— * O.-IUJ

Shock Test Program. Shock Isolation Design Manual for SAFEGUARD TSE Systems and Equipment.

DTIC Science & Technology

1973-08-01

under the direction of the Huntsville Division, Corps of Engineers. Much of the information in Part I and Part II is extracted from " Development of...49 3.2.2 Configuration Development 1-50 3.2.3 Suspension Arrangements 1-51 TABLE OF CONTENTS (Continued) Page 3.2.4 Platform Design 1-56 3.2.5 Elastic...shock isolation systems were considered in the design of the early NIKE-X facilities. As more descriptive prediction methods were developed and employed

Morgantown People Mover Redundant Computing System Design Summary

DOT National Transportation Integrated Search

1980-09-01

The purpose of this report is to describe the redundant computing system design used for the current 1980 Phase II Morgantown People Mover (MPM) system. The redundant computing system is that part of the control and communications system (C&CS) consi...

AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT XV, UNDERSTANDING DC GENERATOR PRINCIPLES (PART II).

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF MAINTENANCE PROCEDURES FOR DIRECT CURRENT GENERATORS USED ON DIESEL POWERED EQUIPMENT. TOPICS ARE SPECIAL GENERATOR CIRCUITS, GENERATOR TESTING, AND GENERATOR POLARITY. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL PROGRAMED TRAINING FILM "DC GENERATORS II--GENERATOR…

People of the Prairies: A Norwegian and German-Russian Curriculum Guide.

ERIC Educational Resources Information Center

Tabbert, Jon Charles, Ed.; Peterson, Fredrick E., Ed.

The guide presents secondary level units designed to promote understanding of the two largest ethnic groups in North Dakota, the Norwegians and the German-Russians. The book is presented in five parts. Part I provides an historical overview of the Norwegian and German-Russian migration to North Dakota. Part II presents three Norwegian units on…

PIP-II Transfer Line Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vivoli, A.

The U.S. Particle Physics Project Prioritization Panel (P5) report encouraged the realization of Fermilab's Proton Improvement Plan II (PIP-II) to support future neutrino programs in the United States. PIP-II aims at enhancing the capabilities of the Fermilab existing accelerator complex while simultaneously providing a flexible platform for its future upgrades. The central part of PIP-II project is the construction of a new 800 MeV H- Superconducting (SC) Linac together with upgrades of the Booster and Main Injector synchrotrons. New transfer lines will also be needed to deliver beam to the down-stream accelerators and facilities. In this paper we present themore » recent development of the design of the transfer lines discussing the principles that guided their design, the constraints and requirements imposed by the existing accelerator complex and the following modifications implemented to comply with a better understanding of the limitations and further requirements that emerged during the development of the project.« less

Design and analysis of randomized clinical trials requiring prolonged observation of each patient. II. analysis and examples.

PubMed Central

Peto, R.; Pike, M. C.; Armitage, P.; Breslow, N. E.; Cox, D. R.; Howard, S. V.; Mantel, N.; McPherson, K.; Peto, J.; Smith, P. G.

1977-01-01

Part I of this report appeared in the previous issue (Br. J. Cancer (1976) 34,585), and discussed the design of randomized clinical trials. Part II now describes efficient methods of analysis of randomized clinical trials in which we wish to compare the duration of survival (or the time until some other untoward event first occurs) among different groups of patients. It is intended to enable physicians without statistical training either to analyse such data themselves using life tables, the logrank test and retrospective stratification, or, when such analyses are presented, to appreciate them more critically, but the discussion may also be of interest to statisticians who have not yet specialized in clinical trial analyses. PMID:831755

Biomechanics of the Sensor–Tissue Interface—Effects of Motion, Pressure, and Design on Sensor Performance and Foreign Body Response—Part II: Examples and Application

PubMed Central

Helton, Kristen L; Ratner, Buddy D; Wisniewski, Natalie A

2011-01-01

This article is the second part of a two-part review in which we explore the biomechanics of the sensor–tissue interface as an important aspect of continuous glucose sensor biocompatibility. Part I, featured in this issue of Journal of Diabetes Science and Technology, describes a theoretical framework of how biomechanical factors such as motion and pressure (typically micromotion and micropressure) affect tissue physiology around a sensor and in turn, impact sensor performance. Here in Part II, a literature review is presented that summarizes examples of motion or pressure affecting sensor performance. Data are presented that show how both acute and chronic forces can impact continuous glucose monitor signals. Also presented are potential strategies for countering the ill effects of motion and pressure on glucose sensors. Improved engineering and optimized chemical biocompatibility have advanced sensor design and function, but we believe that mechanical biocompatibility, a rarely considered factor, must also be optimized in order to achieve an accurate, long-term, implantable sensor. PMID:21722579

33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

Code of Federal Regulations, 2013 CFR

2013-07-01

...) $165,489 I b. Fixed charges (owner's share) 284,460 II A fixed charge such as engineering, design and... new bridge is designed for increased loading and width greater than that of the old bridge. Therefore, the estimated annual maintenance cost was based on a hypothetical bridge designed, but not constructed...

33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

Code of Federal Regulations, 2014 CFR

2014-07-01

...) $165,489 I b. Fixed charges (owner's share) 284,460 II A fixed charge such as engineering, design and... new bridge is designed for increased loading and width greater than that of the old bridge. Therefore, the estimated annual maintenance cost was based on a hypothetical bridge designed, but not constructed...

33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

Code of Federal Regulations, 2010 CFR

2010-07-01

...) $165,489 I b. Fixed charges (owner's share) 284,460 II A fixed charge such as engineering, design and... new bridge is designed for increased loading and width greater than that of the old bridge. Therefore, the estimated annual maintenance cost was based on a hypothetical bridge designed, but not constructed...

33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

Code of Federal Regulations, 2011 CFR

2011-07-01

...) $165,489 I b. Fixed charges (owner's share) 284,460 II A fixed charge such as engineering, design and... new bridge is designed for increased loading and width greater than that of the old bridge. Therefore, the estimated annual maintenance cost was based on a hypothetical bridge designed, but not constructed...

33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

Code of Federal Regulations, 2012 CFR

2012-07-01

...) $165,489 I b. Fixed charges (owner's share) 284,460 II A fixed charge such as engineering, design and... new bridge is designed for increased loading and width greater than that of the old bridge. Therefore, the estimated annual maintenance cost was based on a hypothetical bridge designed, but not constructed...

21 CFR 316.1 - Scope of this part.

Code of Federal Regulations, 2011 CFR

2011-04-01

... drugs for rare diseases or conditions, including biological products and antibiotics. This part sets... for investigations of drugs for rare diseases or conditions; (ii) Requests for designation of a drug for a rare disease or condition; and (iii) Requests for gaining exclusive approval for a drug product...

21 CFR 316.1 - Scope of this part.

Code of Federal Regulations, 2013 CFR

2013-04-01

... drugs for rare diseases or conditions, including biological products and antibiotics. This part sets... for investigations of drugs for rare diseases or conditions; (ii) Requests for designation of a drug for a rare disease or condition; and (iii) Requests for gaining exclusive approval for a drug product...

21 CFR 316.1 - Scope of this part.

Code of Federal Regulations, 2012 CFR

2012-04-01

... drugs for rare diseases or conditions, including biological products and antibiotics. This part sets... for investigations of drugs for rare diseases or conditions; (ii) Requests for designation of a drug for a rare disease or condition; and (iii) Requests for gaining exclusive approval for a drug product...

21 CFR 316.1 - Scope of this part.

Code of Federal Regulations, 2010 CFR

2010-04-01

... drugs for rare diseases or conditions, including biological products and antibiotics. This part sets... for investigations of drugs for rare diseases or conditions; (ii) Requests for designation of a drug for a rare disease or condition; and (iii) Requests for gaining exclusive approval for a drug product...

7 CFR 2902.31 - Greases.

Code of Federal Regulations, 2010 CFR

2010-01-01

... using soaps, polymers or other solids, or other thickeners. (2) Greases for which preferred procurement applies are: (i) Food grade greases. Lubricants that are designed for use on food-processing equipment as... parts and equipment in locations in which there is exposure of the lubricated part to food. (ii...

7 CFR 2902.31 - Greases.

Code of Federal Regulations, 2011 CFR

2011-01-01

... using soaps, polymers or other solids, or other thickeners. (2) Greases for which preferred procurement applies are: (i) Food grade greases. Lubricants that are designed for use on food-processing equipment as... parts and equipment in locations in which there is exposure of the lubricated part to food. (ii...

Real-time speech encoding based on Code-Excited Linear Prediction (CELP)

NASA Technical Reports Server (NTRS)

Leblanc, Wilfrid P.; Mahmoud, S. A.

1988-01-01

This paper reports on the work proceeding with regard to the development of a real-time voice codec for the terrestrial and satellite mobile radio environments. The codec is based on a complexity reduced version of code-excited linear prediction (CELP). The codebook search complexity was reduced to only 0.5 million floating point operations per second (MFLOPS) while maintaining excellent speech quality. Novel methods to quantize the residual and the long and short term model filters are presented.

2010 Workplace and Gender Relations Survey of Active Duty Members. Administration, Datasets, and Codebook

DTIC Science & Technology

2011-04-01

from the survey litho code list if a survey form was sent or independently if only a letter was sent. Ticket Numbers for Web Survey Access Prior...variables BATCH, SERIAL, and LITHO uniquely identify each returned survey. LITHO is the lithocode scanned from the survey. BATCH and SERIAL are the...Uned 593 LEADERSAT Tabs: Leadership Satisfaction Scale- Q11 176 LITHO * Litho code 1086 MAILTYP* Mail Type 1087 MENTOR 12. [12] Do you have a

Early Childhood Longitudinal Study, Kindergarten Class of 2010-11 (ECLS-K:2011). User's Manual for the ECLS-K:2011 Kindergarten-First Grade Data File and Electronic Codebook, Public Version. NCES 2015-078

ERIC Educational Resources Information Center

Tourangeau, Karen; Nord, Christine; Lê, Thanh; Wallner-Allen, Kathleen; Hagedorn, Mary C.; Leggitt, John; Najarian, Michelle

2015-01-01

This manual provides guidance and documentation for users of the longitudinal kindergarten-first grade (K-1) data file of the Early Childhood Longitudinal Study, Kindergarten Class of 2010-11 (ECLS-K:2011). It mainly provides information specific to the first-grade rounds of data collection. Data for the ECLS-K:2011 are released in both a…

April 2006 Status of Forces Survey of Active-Duty Members: Administration, Datasets, and Codebook

DTIC Science & Technology

2006-08-01

be gathered on a particular question. For example, AD080SP is a flag variable indicating when respondents had another reason for a physical injury...94. [94---] Collge credits since enlistment 510 COLCREDF* Top coding flag for COLCRED 1028 COLCREDR Rec COLCRED-Lvl col cred since enlisting 256...homew 507 COMPEDSK [92SK-] Use home PC/onlin dstnce ed 508 COMPSPEDSK [93SK-] Sp Use home PC onlin dstnce 509 COLCRED 94. [94---] Collge credits

Service Academy 2006 Gender Relations Survey: Administration, Datasets, and Codebook

DTIC Science & Technology

2006-07-01

you without your consent Someone repeatedly showed you pornographic materials, even after you asked him/her not to Considered neither sexual...consent? 1 2 3 4 c. Someone repeatedly showed you pornographic materials, even after you asked him/her not to? 1 2 3...SC006C 6c. Know- Pornographic materials SC006D 6d. Know-Rumors about your sex beh Know-Little drunk, forced sex SC006E 6e. SC006F 6f. Know-Ruin

August 2006 Status of Forces Survey of Active Duty Members: Administration, Datasets, and Codebook

DTIC Science & Technology

2006-12-01

beverages on any one occasion? Yes No f. Posters g. Web sites h. Brochures i. Other ATTITUDES...retired" f. Posters NOT [SRSVC1] = "None, I have separated or retired" g. Web sites NOT [SRSVC1] = "None...AL115E* 115e. [115e] Drinking info: news 419 AL115ER Recode AL115ER:common denom 159 AL115F* 115f. [115f] Drinking info: posters 420 AL115FR Recode

Working draft of the FDA GMP final rule (Part II).

PubMed

Donawa, M E

1995-11-01

Part I of this two-part series provided information on the proposed design control provisions of the US Food and Drug Administration's (FDA) working draft of the final rule for new good manufacturing practice regulations for medical devices. The final rule could be published in April or May 1996. It would be in force 180 days after the date of publication. Design control requirements may become effective some months later. This article describes recommended modifications of three provisions that have been intensely discussed during recent FDA-sponsored public meetings.

FISH COMMUNITIES IN LAKE IN SUBREGION 2B (UPPER PENINSULA OF MICHIGAN) IN RELATION TO LAKE ACIDITY: VOLUME II. APPENDICES

EPA Science Inventory

Surveys of fish community status were conducted in summer 1987 in 49 lakes in Subregion 20, the Upper Peninsula of Michigan, as part of Phase II of the Eastern Lake Survey. Lake selection involved a variable probability sampling design. Fish communities were surveyed using gill n...

SCORE: Service Corps of Retired Executives. Counselor's Guidebook. One Part of ACTION.

ERIC Educational Resources Information Center

Small Business Administration, Washington, DC.

This guidebook, designed for the use of SCORE volunteers, is intended to familiarize new counselors with SCORE operations and to provide reference material to assist counselors in handling cases. Chapters are: (1) SCORE Purposes and Objectives; (II-A-1) Approach to Counseling; (II-A-2) Organization of the Business--legal forms, management or…

Research safety vehicle program (Phase II) specification review. Volume II. Final technical report, Jul 1975--Nov 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pugliese, S.M.

1977-02-01

In Phase I of the Research Safety Vehicle Program (RSV), preliminary design and performance specifications were developed for a mid-1980's vehicle that integrates crashworthiness and occupant safety features with material resource conservation, economy, and producibility. Phase II of the program focused on development of the total vehicle design via systems engineering and integration analyses. As part of this effort, it was necessary to continuously review the Phase I recommended performance specification in relation to ongoing design/test activities. This document contains the results of analyses of the Phase I specifications. The RSV is expected to satisfy all of the producibility andmore » safety related specifications, i.e., handling and stability systems, crashworthiness, occupant protection, pedestrian/cyclist protection, etc.« less

Laboratory Animal Housing--Parts I and II.

ERIC Educational Resources Information Center

Runkle, Robert S.

1963-01-01

In recent years, the use of laboratory animals for bio-medical research has shown marked increase. Economic and efficient housing is a necessity. This two part report established guidelines for design and selection of materials for conventional animal housing. Contents include--(1) production and breeding facilities, (2) quarantine facilities, (3)…

21 CFR 316.1 - Scope of this part.

Code of Federal Regulations, 2014 CFR

2014-04-01

... drugs for rare diseases or conditions, including biological products and antibiotics. This part sets... for investigations of drugs for rare diseases or conditions; (ii) Requests for designation of a drug for a rare disease or condition; and (iii) Requests for gaining exclusive approval for a drug for a...

A/C Interface: Workstations in the Laboratory: Part II.

ERIC Educational Resources Information Center

Dessy, Raymond E., Ed.

1985-01-01

Discusses the design philosophies of four different scientific workstations. Each workstation uses a different approach and addresses different needs. The intent is to provide material that, in conjunction with part I, can provide scientists with an ability to critically evaluate the numerous commercially available scientific workstations. (JN)

75 FR 45013 - Pre-Existing Condition Insurance Plan Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-30

... provided (an important protection for a program designed to offer coverage to those with a pre-existing... Part II Department of Health and Human Services 45 CFR Part 152 Pre-Existing Condition Insurance... [OCIIO-9995-IFC] RIN 0991-AB71 Pre-Existing Condition Insurance Plan Program AGENCY: Office of Consumer...

DIY Soundcard Based Temperature Logging System. Part II: Applications

ERIC Educational Resources Information Center

Nunn, John

2016-01-01

This paper demonstrates some simple applications of how temperature logging systems may be used to monitor simple heat experiments, and how the data obtained can be analysed to get some additional insight into the physical processes. [For "DIY Soundcard Based Temperature Logging System. Part I: Design," see EJ1114124.

Using Technology as a Course Supplement (Part II).

ERIC Educational Resources Information Center

Eastmond, Dan; Granger, Dan

1997-01-01

This article, the second in a two-part series on aspects of distance education, presents pedagogical considerations concerning Type I Technology, technology (such as e-mail, Listservs, newsgroups, and MOOs) used primarily to supplement other learning resources. Examines the design, development, delivery, and evaluation phases of courses using Type…

A General Pressure Gradient Formulation for Ocean Models, Part 1: Scheme Design and Diagnostic Analysis, Part II: Energy, Momentum, and Bottom Torque Consistency

NASA Technical Reports Server (NTRS)

Song, Y. T.

1998-01-01

A Jacobian formulation of the pressure gradient force for use in models with topography following coordinates is proposed. It can be used in conjunction with any vertical coordinate system and is easily implemented.

Skewed steel bridges, part ii : cross-frame and connection design to ensure brace effectiveness : technical summary.

DOT National Transportation Integrated Search

2017-08-01

Skewed bridges in Kansas are often designed such that the cross-frames are carried parallel to the skew angle up to 40, while many other states place cross-frames perpendicular to the girder for skew angles greater than 20. Skewed-parallel cross-...

Skewed steel bridges, part ii : cross-frame and connection design to ensure brace effectiveness : final report.

DOT National Transportation Integrated Search

2017-08-01

Skewed bridges in Kansas are often designed such that the cross-frames are carried parallel to the skew angle up to 40, while many other states place cross-frames perpendicular to the girder for skew angles greater than 20. Skewed-parallel cross-...

46 CFR 56.20-1 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... accordance with § 56.60-1 of this part. (2) Valves must be designed so that the maximum allowable working... permits this; (ii) Subjecting a representative model to a proof test or experimental stress analysis... uncontrollable rise in pressure can result, means must be provided in the design, installation, and operation of...

18 CFR Appendix A to Part 380 - Minimum Filing Requirements for Environmental Reports Under the Natural Gas Act

Code of Federal Regulations, 2010 CFR

2010-04-01

... provide sufficient comparative data to justify the selection of the proposed route. (§ 380.12(l)(2)(ii)) 5... sufficient comparative data to justify the selection of the proposed site. (§ 380.12(l)(2)(ii)) Resource Report 11—Reliability and Safety Describe how the project facilities would be designed, constructed...

18 CFR Appendix A to Part 380 - Minimum Filing Requirements for Environmental Reports Under the Natural Gas Act

Code of Federal Regulations, 2012 CFR

2012-04-01

... provide sufficient comparative data to justify the selection of the proposed route. (§ 380.12(l)(2)(ii)) 5... sufficient comparative data to justify the selection of the proposed site. (§ 380.12(l)(2)(ii)) Resource Report 11—Reliability and Safety Describe how the project facilities would be designed, constructed...

18 CFR Appendix A to Part 380 - Minimum Filing Requirements for Environmental Reports Under the Natural Gas Act

Code of Federal Regulations, 2014 CFR

2014-04-01

... provide sufficient comparative data to justify the selection of the proposed route. (§ 380.12(l)(2)(ii)) 5... sufficient comparative data to justify the selection of the proposed site. (§ 380.12(l)(2)(ii)) Resource Report 11—Reliability and Safety Describe how the project facilities would be designed, constructed...

18 CFR Appendix A to Part 380 - Minimum Filing Requirements for Environmental Reports Under the Natural Gas Act

Code of Federal Regulations, 2013 CFR

2013-04-01

... provide sufficient comparative data to justify the selection of the proposed route. (§ 380.12(l)(2)(ii)) 5... sufficient comparative data to justify the selection of the proposed site. (§ 380.12(l)(2)(ii)) Resource Report 11—Reliability and Safety Describe how the project facilities would be designed, constructed...

18 CFR Appendix A to Part 380 - Minimum Filing Requirements for Environmental Reports Under the Natural Gas Act

Code of Federal Regulations, 2011 CFR

2011-04-01

... provide sufficient comparative data to justify the selection of the proposed route. (§ 380.12(l)(2)(ii)) 5... sufficient comparative data to justify the selection of the proposed site. (§ 380.12(l)(2)(ii)) Resource Report 11—Reliability and Safety Describe how the project facilities would be designed, constructed...

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XXVIII, I--CATERPILLAR STARTING (PONEY) ENGINE (PART II), II--UNDERSTANDING MORE ABOUT STARTING DEVICES.

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATION AND MAINTENANCE OF DIESEL ENGINE STARTING ENGINES. TOPICS ARE (1) STARTING ENGINE MAGNETO (WICO), (2) MAGNETO MAINTENANCE, (3) SPARK PLUGS, (4) GENERAL DESCRIPTION (STARTING DEVICES), (5) OPERATING (STARTING DEVICES), (6) LUBRICATION (STARTING DEVICES), (7)…

Phase II, improved work zone design guidelines and enhanced model of traffic delays in work zones : final report, March 2009.

DOT National Transportation Integrated Search

2009-03-01

This project contains three major parts. In the first part a digital computer simulation model was developed with the aim to model the traffic through a freeway work zone situation. The model was based on the Arena simulation software and used cumula...

36 CFR 1002.1 - Preservation of natural, cultural and archeological resources.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Living or dead wildlife or fish, or the parts or products thereof, such as antlers or nests. (ii) Plants... parts thereof. (2) Introducing wildlife, fish or plants, including their reproductive bodies, into an... the Presidio Trust: Provided, however, that the Board may designate areas where dead wood on the...

36 CFR 1002.1 - Preservation of natural, cultural and archeological resources.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Living or dead wildlife or fish, or the parts or products thereof, such as antlers or nests. (ii) Plants... parts thereof. (2) Introducing wildlife, fish or plants, including their reproductive bodies, into an... the Presidio Trust: Provided, however, that the Board may designate areas where dead wood on the...

Health Education Teaching Ideas: Secondary. Revised Edition.

ERIC Educational Resources Information Center

Loya, Richard, Ed.; Bensley, Loren B., Jr., Ed.

Part I of this teaching guide contains teaching strategies which originally appeared in the "Journal of Health Education" (JHE) and were included in the first edition of this guide, published in 1983. Part II includes teaching strategies published in JHE since 1983. The guide is designed to be a reference for those seeking workable ideas in…

Inventorying recreation use

Treesearch

George A. James

1971-01-01

Part I is a general discussion about the estimation of recreation use, with descriptions of selected sampling techniques for estimating recreation use on a wide variety of different sites and areas. Part II is a brief discussion of an operational computer oriented information system designed and developed by the USDA Forest Service to fully utilize the inventories of...

Topics in Chemical Instrumentation: Fourier Transform-Infrared Spectroscopy: Part I. Instrumentation.

ERIC Educational Resources Information Center

Perkins, W. D.

1986-01-01

Discusses: (1) the design of the Fourier Transform-Infrared Spectroscopy (FT-IR) spectrometer; (2) the computation of the spectrum from the interferogram; and (3) the use of apodization. (Part II will discuss advantages of FT-IR over dispersive techniques and show applications of FT-IR to difficult spectroscopic measurements.) (JN)

Curriculum Guide for Hospitality Education. Part II. Exemplary Project.

ERIC Educational Resources Information Center

Kalani, Henry

This second of a two-part study designed to develop a hospitality education program model for Hawaii's community colleges is based on the primary data gathered in a survey of the hospitality industry characteristics, manpower requirements, and employment demands. (Survey data is reported in volume 1 of the study.) The introductory section of this…

Phase II, improved work zone design guidelines and enhanced model of traffic delays in work zones : executive summary report.

DOT National Transportation Integrated Search

2009-03-01

This project contains three major parts. In the first part a digital computer simulation model was developed with the aim to model the traffic through a freeway work zone situation. The model was based on the Arena simulation software and used cumula...

Hydrolytic catalysis and structural stabilization in a designed metalloprotein

PubMed Central

Zastrow, Melissa L.; Peacock, Anna F. A.; Stuckey, Jeanne A.; Pecoraro, Vincent L.

2011-01-01

Metal ions are an important part of many natural proteins, providing structural, catalytic and electron transfer functions. Reproducing these functions in a designed protein is the ultimate challenge to our understanding of them. Here, we present an artificial metallohydrolase, which has been shown by X-ray crystallography to contain two different metal ions – a Zn(II) ion which is important for catalytic activity and a Hg(II) ion which provides structural stability. This metallohydrolase displays catalytic activity that compares well with several characteristic reactions of natural enzymes. It catalyses p-nitrophenyl acetate hydrolysis (pNPA) to within ~100-fold of the efficiency of human carbonic anhydrase (CA)II and is at least 550-fold better than comparable synthetic complexes. Similarly, CO2 hydration occurs with an efficiency within ~500-fold of CAII. While histidine residues in the absence of Zn(II) exhibit pNPA hydrolysis, miniscule apopeptide activity is observed for CO2 hydration. The kinetic and structural analysis of this first de novo designed hydrolytic metalloenzyme uncovers necessary design features for future metalloenzymes containing one or more metals. PMID:22270627

40 CFR 723.175 - Chemical substances used in or for the manufacture or processing of instant photographic and peel...

Code of Federal Regulations, 2012 CFR

2012-07-01

... shape or design during manufacture, (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use, and (iii) which has either no change of chemical composition... particles are not considered articles regardless of shape or design. (3) The terms byproduct, EPA...

40 CFR 723.175 - Chemical substances used in or for the manufacture or processing of instant photographic and peel...

Code of Federal Regulations, 2011 CFR

2011-07-01

... shape or design during manufacture, (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use, and (iii) which has either no change of chemical composition... particles are not considered articles regardless of shape or design. (3) The terms byproduct, EPA...

40 CFR 723.175 - Chemical substances used in or for the manufacture or processing of instant photographic and peel...

Code of Federal Regulations, 2013 CFR

2013-07-01

... shape or design during manufacture, (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use, and (iii) which has either no change of chemical composition... particles are not considered articles regardless of shape or design. (3) The terms byproduct, EPA...

40 CFR 723.175 - Chemical substances used in or for the manufacture or processing of instant photographic and peel...

Code of Federal Regulations, 2014 CFR

2014-07-01

... shape or design during manufacture, (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use, and (iii) which has either no change of chemical composition... particles are not considered articles regardless of shape or design. (3) The terms byproduct, EPA...

NSLS-II Preliminary Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dierker, S.

2007-11-01

Following the CD0 approval of the National Synchrotron Light Source II (NSLS-II) during August 2005, Brookhaven National Laboratory prepared a conceptual design for a worldclass user facility for scientific research using synchrotron radiation. DOE SC review of the preliminary baseline in December 2006 led to the subsequent CD1 approval (approval of alternative selection and cost range). This report is the documentation of the preliminary design work for the NSLS-II facility. The preliminary design of the Accelerator Systems (Part 1) was developed mostly based of the Conceptual Design Report, except for the Booster design, which was changed from in-storage-ring tunnel configurationmore » to in external- tunnel configuration. The design of beamlines (Part 2) is based on designs developed by engineering firms in accordance with the specification provided by the Project. The conventional facility design (Part 3) is the Title 1 preliminary design by the AE firm that met the NSLS-II requirements. Last and very important, Part 4 documents the ES&H design and considerations related to this preliminary design. The NSLS-II performance goals are motivated by the recognition that major advances in many important technology problems will require scientific breakthroughs in developing new materials with advanced properties. Achieving this will require the development of new tools that will enable the characterization of the atomic and electronic structure, chemical composition, and magnetic properties of materials, at nanoscale resolution. These tools must be nondestructive, to image and characterize buried structures and interfaces, and they must operate in a wide range of temperatures and harsh environments. The NSLS-II facility will provide ultra high brightness and flux and exceptional beam stability. It will also provide advanced insertion devices, optics, detectors, and robotics, and a suite of scientific instruments designed to maximize the scientific output of the facility. Together these will enable the study of material properties and functions with a spatial resolution of {approx}1 nm, an energy resolution of {approx}0.1 meV, and the ultra high sensitivity required to perform spectroscopy on a single atom. In order to meet this need, NSLS-II has been designed to provide world-leading brightness and flux and exceptional beam stability. The brightness is defined as the number of photons emitted per second, per photon energy bandwidth, per solid angle, and per unit source size. Brightness is important because it determines how efficiently an intense flux of photons can be refocused to a small spot size and a small divergence. It scales as the ring current and the number of total periods of the undulator field (both of which contribute linearly to the total flux), as well as eing nversely proportional to the horizontal and vertical emittances (the product of beam size and divergence) of the electron beam. Raising the current in the storage ring to obtain even brighter beams is ultimately limited by beam-driven, collective instabilities in the accelerator. Thus, to maximize the brightness, the horizontal and vertical emittances must be made as small as possible. With the concept of using damping wigglers, low-field bending magnets, and a large number of lattice cells to achieve ultra small emittance, the performance of NSLS-II will be nearly at the ultimate limit of storage ring light sources, set by the intrinsic properties of the synchrotron radiation process. The facility will produce x-rays more than 10,000 times brighter than those produced at NSLS today. The facility, with various insertion devices, including three-pole-wigglers and low-field dipole radiations, has the capability of covering a broad range of radiation spectra, from hard x-ray to far infra-red. The superlative character and combination of capabilities will have broad impact on a wide range of disciplines and scientific initiatives in the coming decades, including new studies of small crystals in structural biology, a wide range of nanometer-resolution probes for nanoscience, coherent imaging of the structure and dynamics of disordered materials, greatly increased applicability of inelastic x-ray scattering, and properties of materials under extreme conditions. Commissioned in 1982, the existing National Synchrotron Light Source (NSLS) provides essential scientific tools for 2,300 scientists per year from more than 400 academic, industrial, and government institutions. Their myriad research programs produce about 800 publications per year, with more than 130 appearing in premier journals. It was designed in the 1970s and is now in its third decade of service. It has been continually upgraded over the years, with the brightness increasing fully five orders of magnitude. However, it has reached the theoretical limits of performance given its small circumference and small periodicity, and only a small number of insertion devices are possible.« less

Market-Based Coordination of Thermostatically Controlled Loads—Part I: A Mechanism Design Formulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Sen; Zhang, Wei; Lian, Jianming

This paper focuses on the coordination of a population of Thermostatically Controlled Loads (TCLs) with unknown parameters to achieve group objectives. The problem involves designing the bidding and market clearing strategy to motivate self-interested users to realize efficient energy allocation subject to a peak power constraint. Using the mechanism design approach, we propose a market-based coordination framework, which can effectively incorporate heterogeneous load dynamics, systematically deal with user preferences, account for the unknown load model parameters, and enable the real-world implementation with limited communication resources. This paper is divided into two parts. Part I presents a mathematical formulation of themore » problem and develops a coordination framework using the mechanism design approach. Part II presents a learning scheme to account for the unknown load model parameters, and evaluates the proposed framework through realistic simulations.« less

75 FR 77674 - Sunshine Act Meeting Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-13

... Designation. 4. Proposed Rule--Part 740 of NCUA's Rules and Regulations, Accuracy of Advertising and Notice of...-bearing Transaction Accounts. 6. Tri-State Federal Credit Union's Appeal of Region II's Denial of its...

Repository Planning, Design, and Engineering: Part II-Equipment and Costing.

PubMed

Baird, Phillip M; Gunter, Elaine W

2016-08-01

Part II of this article discusses and provides guidance on the equipment and systems necessary to operate a repository. The various types of storage equipment and monitoring and support systems are presented in detail. While the material focuses on the large repository, the requirements for a small-scale startup are also presented. Cost estimates and a cost model for establishing a repository are presented. The cost model presents an expected range of acquisition costs for the large capital items in developing a repository. A range of 5,000-7,000 ft(2) constructed has been assumed, with 50 frozen storage units, to reflect a successful operation with growth potential. No design or engineering costs, permit or regulatory costs, or smaller items such as the computers, software, furniture, phones, and barcode readers required for operations have been included.

Implementing AORN recommended practices for a safe environment of care, part II.

PubMed

Kennedy, Lynne

2014-09-01

Construction in and around a working perioperative suite is a challenge beyond merely managing traffic patterns and maintaining the sterile field. The AORN "Recommended practices for a safe environment of care, part II" provides guidance on building design; movement of patients, personnel, supplies, and equipment; environmental controls; safety and security; and control of noise and distractions. Whether the OR suite evolves through construction, reconstruction, or remodeling, a multidisciplinary team of construction experts and health care professionals should create a functional plan and communicate at every stage of the project to maintain a safe environment and achieve a well-designed outcome. Emergency preparedness, a facility-wide security plan, and minimization of noise and distractions in the OR also help enhance the safety of the perioperative environment. Copyright © 2014 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Encryption techniques to the design of e-beam-generated digital pixel hologram for anti-counterfeiting

NASA Astrophysics Data System (ADS)

Chan, Hau P.; Bao, Nai-Keng; Kwok, Wing O.; Wong, Wing H.

2002-04-01

The application of Digital Pixel Hologram (DPH) as anti-counterfeiting technology for products such as commercial goods, credit cards, identity cards, paper money banknote etc. is growing important nowadays. It offers many advantages over other anti-counterfeiting tools and this includes high diffraction effect, high resolving power, resistance to photo copying using two-dimensional Xeroxes, potential for mass production of patterns at a very low cost. Recently, we have successfully in fabricating high definition DPH with resolution higher than 2500dpi for the purpose of anti-counterfeiting by applying modern optical diffraction theory to computer pattern generation technique with the assist of electron beam lithography (EBL). In this paper, we introduce five levels of encryption techniques, which can be embedded in the design of such DPHs to further improve its anti-counterfeiting performance with negligible added on cost. The techniques involved, in the ascending order of decryption complexity, are namely Gray-level Encryption, Pattern Encryption, Character Encryption, Image Modification Encryption and Codebook Encryption. A Hong Kong Special Administration Regions (HKSAR) DPH emblem was fabricated at a resolution of 2540dpi using the facilities housed in our Optoelectronics Research Center. This emblem will be used as an illustration to discuss in details about each encryption idea during the conference.

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XXIII, I--MAINTAINING THE FUEL SYSTEM, PART II--CATERPILLAR DIESEL ENGINE, II--UNDERSTANDING STEERING SYSTEMS.

ERIC Educational Resources Information Center

Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATION AND MAINTENANCE OF THE DIESEL ENGINE FUEL INJECTION SYSTEM AND THE STEERING SYSTEM OF DIESEL POWERED VEHICLES. TOPICS ARE FUEL INJECTION SECTION, AND DESCRIPTION OF THE STEERING SYSTEM. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL BRANCH PROGRAMED TRAINING…

1999 Survey of Active Duty Personnel: Administration, Datasets, and Codebook. Appendix G: Frequency and Percentage Distributions for Variables in the Survey Analysis Files.

DTIC Science & Technology

2000-12-01

A SKIP FLAG INDICATING THE RESULT OF CHECKING THE RESPONSE ON THE PARENT (SCREENING) ITEM AGAINST THE RESPONSE(S) ON THE ITEMS WITHIN THE SKIP...RESPONSE ON THE PARENT (SCREENING) ITEM AGAINST THE RESPONSE(S) ON THE ITEMS WITHIN THE SKIP PATTERN. SEE TABLE D-5, NOTE 2, IN APPENDIX D. G-52...RESULT OF CHECKING THE RESPONSE ON THE PARENT (SCREENING) ITEM AGAINST THE RESPONSE(S) ON THE ITEMS WITHIN THE SKIP PATTERN. SEE TABLE D-5

The 1985 ARI Survey of Army Recruits: Codebook for Summer 85 USAR and ARNG Survey Respondents. Volume 2

DTIC Science & Technology

1986-05-01

CHECKED 100 I 1.9 I 1 ICHECKED - I NEVER RECEIVED A RESPONSE IN THE I I IMAIL FROM THE CARD I SENT IN 516 1 100.0 1 TOTALSI I I A I B I C 1 11982 l1983...I . NO RESPONSE 2626 I 49.4 I C IVALID SKIP 2369 I 44.6 I 0 INOT CHECKED 84 I 1 .6 I 1 ICHECKED - I NEVER RECEIVED A RESPONSE IN THE I I IMAIL TO MY

The 1984 ARI Survey of Army Recruits. Codebook for Summer 84 Active Army Survey Respondents

DTIC Science & Technology

1986-05-01

ARMY SURVEY RESPONDENTS T261 - DO YOU HATCH ANY OF THE FOLLOWING PROGRAMS OR PROGRAMMING TYPES ON TV? - NBA BASKETBALL . RAN DATA ICARD i1 COLS ILENGTHII... BASKETBALL 280 T262 WATCH TV PROG:COLLEGE BASKETBALL 281 T263 WATCH TV PROG:NHL HOCKEY 282 T264 WATCH TV PROG:PROFESSIONAL WRESTLING 283 T265 WATCH TV...SURVEY RESPONDENTS T262 - DO YOU HATCH ANY OF THE FOLLOWING PROGRAMS OR PROGRAMMING TYPES ON TV? - COLLEGE BASKETBALL . RAW DATA ICARD #1 COLS ILENGTHII

2012 Workplace and Gender Relations Survey of Active Duty Members: Administration, Datasets and Codebook

DTIC Science & Technology

2013-11-04

banners, etc.) 1950 1.8 5 5 Posters , brochures and/or stickers 9511 8.8 6 6 Unit 680 0.6 7 7 Chaplain 2148 2.0 8 8 Other 108478 100.0 TOTALS...service announcement 411 0.4 3 3 Print advertisement 688 0.6 4 4 Online media (e.g., website, blog, banners, etc.) 1950 1.8 5 5 Posters , brochures...Safe Helpline? Posters , brochures and/or stickers OS DATA SAS DATA COLS LENGTH FORMAT NAME TYPE LENGTH INFORMAT NA-NA NA MARKED NUM 3 STDOS2

Progressive Vector Quantization on a massively parallel SIMD machine with application to multispectral image data

NASA Technical Reports Server (NTRS)

Manohar, Mareboyana; Tilton, James C.

1994-01-01

A progressive vector quantization (VQ) compression approach is discussed which decomposes image data into a number of levels using full search VQ. The final level is losslessly compressed, enabling lossless reconstruction. The computational difficulties are addressed by implementation on a massively parallel SIMD machine. We demonstrate progressive VQ on multispectral imagery obtained from the Advanced Very High Resolution Radiometer instrument and other Earth observation image data, and investigate the trade-offs in selecting the number of decomposition levels and codebook training method.

Synthesis: Part II, Land Use Attractiveness.

ERIC Educational Resources Information Center

Pressman, Rob

This material includes student guide sheets, reference material, and tape script for the audio-tutorial unit on the Synthesis Unit, Land Use Attractiveness. An audiotape is used with the materials. The material is designed for use with Connecticut schools, but can be adapted to other localities. The unit is designed to build on skills and…

40 CFR 63.988 - Incinerators, boilers, and process heaters.

Code of Federal Regulations, 2012 CFR

2012-07-01

... position before any substantial heat exchange occurs. (2) Where a catalytic incinerator is used... status requirements of 40 CFR part 265, subpart O; (ii) A boiler or process heater with a design heat... per hour) design heat input capacity is used and the regulated vent stream is not introduced as or...

40 CFR 63.988 - Incinerators, boilers, and process heaters.

Code of Federal Regulations, 2010 CFR

2010-07-01

... position before any substantial heat exchange occurs. (2) Where a catalytic incinerator is used... status requirements of 40 CFR part 265, subpart O; (ii) A boiler or process heater with a design heat... per hour) design heat input capacity is used and the regulated vent stream is not introduced as or...

40 CFR 63.988 - Incinerators, boilers, and process heaters.

Code of Federal Regulations, 2013 CFR

2013-07-01

... position before any substantial heat exchange occurs. (2) Where a catalytic incinerator is used... status requirements of 40 CFR part 265, subpart O; (ii) A boiler or process heater with a design heat... per hour) design heat input capacity is used and the regulated vent stream is not introduced as or...

40 CFR 63.988 - Incinerators, boilers, and process heaters.

Code of Federal Regulations, 2011 CFR

2011-07-01

... position before any substantial heat exchange occurs. (2) Where a catalytic incinerator is used... status requirements of 40 CFR part 265, subpart O; (ii) A boiler or process heater with a design heat... per hour) design heat input capacity is used and the regulated vent stream is not introduced as or...

40 CFR 63.988 - Incinerators, boilers, and process heaters.

Code of Federal Regulations, 2014 CFR

2014-07-01

... position before any substantial heat exchange occurs. (2) Where a catalytic incinerator is used... status requirements of 40 CFR part 265, subpart O; (ii) A boiler or process heater with a design heat... per hour) design heat input capacity is used and the regulated vent stream is not introduced as or...

Menominee Indian Tribe of Wisconsin. Part I: Inventory of Resources; Part II: Annotated Bibliography. Report No. 230.

ERIC Educational Resources Information Center

Stephens, Wayne E.; And Others

Designed to provide data and resource materials needed by the Menominee Restoration Committee and others involved in reservation organizational and development planning, this report covers the present status of the Menominee tribal resources and presents an annotated bibliography. The resource inventory includes maps, tables, and charts and is…

Wetlands & Wildlife: Alaska Wildlife Curriculum Teacher Information Manual, Parts I-II.

ERIC Educational Resources Information Center

Sigman, Marilyn; And Others

This document consists of a teacher manual and a set of information cards. The teacher manual is designed to educate Alaskan students about the important functions of Alaska's wetlands and about the fish and wildlife that live there. Part I of the manual explores Alaska's wetland habitats, the plants and animals that live there, and the…

Handbook for Rural Students: Finding Employment and Adjusting to Urban Areas. Revised Edition.

ERIC Educational Resources Information Center

Vaughn, D. Lanette; Vaughn, Paul R.

Designed to help rural students find employment and adjust to life in urban areas, the handbook provides basic information in six subject areas. Part I focuses on getting to know yourself by assessing past activities, preferences, abilities, personality, limitations, and values. Part II explores aspects of jobs and careers: being career oriented,…

Proposed Computer System for Library Catalog Maintenance. Part II: System Design.

ERIC Educational Resources Information Center

Stein (Theodore) Co., New York, NY.

The logic of the system presented in this report is divided into six parts for computer processing and manipulation. They are: (1) processing of Library of Congress copy, (2) editing of input into standard format, (3) processing of information into and out from the authority files, (4) creation of the catalog records, (5) production of the…

Handbook II: Advanced Teaching Strategies for Adjunct and Part-Time Faculty.

ERIC Educational Resources Information Center

Greive, Donald E., Ed.

This handbook is designed to help part-time and adjunct faculty who need professional enhancement but do not have the time for formal coursework. The focus is on the modern student, who differs in many ways from the traditional college student. The book provides more advanced strategies that those presented in the earlier "Handbook for…

Accidental Nuclear War: The Growing Peril. Part I [and] Part II.

ERIC Educational Resources Information Center

Newcombe, Alan, Ed.

1984-01-01

Two volumes designed to increase awareness of accidental nuclear war dangers are presented. The first of 5 sections in volume I proposes that although accidental war is preventable, the current arms race and secrecy about accidents and false alarms increase the possibility of an accidental war. Section 2 posits that decreased decision-making time…

Aesthetic Pursuits: Windows, Frames, Words, Images--Part II

ERIC Educational Resources Information Center

Burke, Ken

2005-01-01

In Part I of this study (Burke, 2005), the author presented the essentials of Image Presentation Theory--IPT--and its application to the analytical explication of various spatial designs in and psychological responses to images, from the illusions of depth in what is referred to as "windows" in cinema theory to the more patterned abstractions of…

Hazardous sign detection for safety applications in traffic monitoring

NASA Astrophysics Data System (ADS)

Benesova, Wanda; Kottman, Michal; Sidla, Oliver

2012-01-01

The transportation of hazardous goods in public streets systems can pose severe safety threats in case of accidents. One of the solutions for these problems is an automatic detection and registration of vehicles which are marked with dangerous goods signs. We present a prototype system which can detect a trained set of signs in high resolution images under real-world conditions. This paper compares two different methods for the detection: bag of visual words (BoW) procedure and our approach presented as pairs of visual words with Hough voting. The results of an extended series of experiments are provided in this paper. The experiments show that the size of visual vocabulary is crucial and can significantly affect the recognition success rate. Different code-book sizes have been evaluated for this detection task. The best result of the first method BoW was 67% successfully recognized hazardous signs, whereas the second method proposed in this paper - pairs of visual words and Hough voting - reached 94% of correctly detected signs. The experiments are designed to verify the usability of the two proposed approaches in a real-world scenario.

Exploring the physical layer frontiers of cellular uplink: The Vienna LTE-A Uplink Simulator.

PubMed

Zöchmann, Erich; Schwarz, Stefan; Pratschner, Stefan; Nagel, Lukas; Lerch, Martin; Rupp, Markus

Communication systems in practice are subject to many technical/technological constraints and restrictions. Multiple input, multiple output (MIMO) processing in current wireless communications, as an example, mostly employs codebook-based pre-coding to save computational complexity at the transmitters and receivers. In such cases, closed form expressions for capacity or bit-error probability are often unattainable; effects of realistic signal processing algorithms on the performance of practical communication systems rather have to be studied in simulation environments. The Vienna LTE-A Uplink Simulator is a 3GPP LTE-A standard compliant MATLAB-based link level simulator that is publicly available under an academic use license, facilitating reproducible evaluations of signal processing algorithms and transceiver designs in wireless communications. This paper reviews research results that have been obtained by means of the Vienna LTE-A Uplink Simulator, highlights the effects of single-carrier frequency-division multiplexing (as the distinguishing feature to LTE-A downlink), extends known link adaptation concepts to uplink transmission, shows the implications of the uplink pilot pattern for gathering channel state information at the receiver and completes with possible future research directions.

Blade System Design Study. Part II, final project report (GEC).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffin, Dayton A.

2009-05-01

As part of the U.S. Department of Energy's Low Wind Speed Turbine program, Global Energy Concepts LLC (GEC)1 has studied alternative composite materials for wind turbine blades in the multi-megawatt size range. This work in one of the Blade System Design Studies (BSDS) funded through Sandia National Laboratories. The BSDS program was conducted in two phases. In the Part I BSDS, GEC assessed candidate innovations in composite materials, manufacturing processes, and structural configurations. GEC also made recommendations for testing composite coupons, details, assemblies, and blade substructures to be carried out in the Part II study (BSDS-II). The BSDS-II contract periodmore » began in May 2003, and testing was initiated in June 2004. The current report summarizes the results from the BSDS-II test program. Composite materials evaluated include carbon fiber in both pre-impregnated and vacuum-assisted resin transfer molding (VARTM) forms. Initial thin-coupon static testing included a wide range of parameters, including variation in manufacturer, fiber tow size, fabric architecture, and resin type. A smaller set of these materials and process types was also evaluated in thin-coupon fatigue testing, and in ply-drop and ply-transition panels. The majority of materials used epoxy resin, with vinyl ester (VE) resin also used for selected cases. Late in the project, testing of unidirectional fiberglass was added to provide an updated baseline against which to evaluate the carbon material performance. Numerous unidirectional carbon fabrics were considered for evaluation with VARTM infusion. All but one fabric style considered suffered either from poor infusibility or waviness of fibers combined with poor compaction. The exception was a triaxial carbon-fiberglass fabric produced by SAERTEX. This fabric became the primary choice for infused articles throughout the test program. The generally positive results obtained in this program for the SAERTEX material have led to its being used in innovative prototype blades of 9-m and 30-m length, as well as other non-wind related structures.« less

Book Review

NASA Astrophysics Data System (ADS)

Mishchenko, Michael I.

2016-08-01

The main purpose of this exemplary book is to provide a systematic exposition of the entire field of optical tweezers and their applications. The book is divided into three (approximately equal) parts summarizing the electromagnetic theory of optical tweezers (Part I), the practice of designing and building optical tweezers (Part II), and extensive applications of optical tweezers in various branches of science (Part III). The exposition is highly methodical and addresses the needs of anyone dealing with optical tweezers, be it a theoretician, an engineer/experimentalist, a routine practitioner, or an interested scientist.

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XI, PART I--MAINTAINING THE FUEL SYSTEM (PART I), CUMMINS DIESEL ENGINES, PART II--UNIT REPLACEMENT (ENGINE).

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF DIFFERENCES BETWEEN TWO AND FOUR CYCLE ENGINES, THE OPERATION AND MAINTENANCE OF THE DIESEL ENGINE FUEL SYSTEM, AND THE PROCEDURES FOR DIESEL ENGINE REMOVAL. TOPICS ARE (1) REVIEW OF TWO CYCLE AND FOUR CYCLE CONCEPT, (2) SOME BASIC CHARACTERISTICS OF FOUR CYCLE ENGINES,…

"We'll Get to You When We Get to You": Exploring Potential Contributions of Health Care Staff Behaviors to Patient Perceptions of Discrimination and Satisfaction.

PubMed

Tajeu, Gabriel S; Cherrington, Andrea L; Andreae, Lynn; Prince, Candice; Holt, Cheryl L; Halanych, Jewell H

2015-10-01

We qualitatively assessed patients' perceptions of discrimination and patient satisfaction in the health care setting specific to interactions with nonphysician health care staff. We conducted 12 focus-group interviews with African American and European American participants, stratified by race and gender, from June to November 2008. We used a topic guide to facilitate discussion and identify factors contributing to perceived discrimination and analyzed transcripts for relevant themes using a codebook. We enrolled 92 participants: 55 African Americans and 37 European Americans, all of whom reported perceived discrimination and lower patient satisfaction as a result of interactions with nonphysician health care staff. Perceived discrimination was associated with 2 main characteristics: insurance or socioeconomic status and race. Both verbal and nonverbal communication style on the part of nonphysician health care staff were related to individuals' perceptions of how they were treated. The behaviors of nonphysician health care staff in the clinical setting can potentially contribute to patients' perceptions of discrimination and lowered patient satisfaction. Future interventions to reduce health care discrimination should include a focus on staff cultural competence and customer service skills.

“We’ll Get to You When We Get to You”: Exploring Potential Contributions of Health Care Staff Behaviors to Patient Perceptions of Discrimination and Satisfaction

PubMed Central

Cherrington, Andrea L.; Andreae, Lynn; Prince, Candice; Holt, Cheryl L.; Halanych, Jewell H.

2015-01-01

Objectives. We qualitatively assessed patients’ perceptions of discrimination and patient satisfaction in the health care setting specific to interactions with nonphysician health care staff. Methods. We conducted 12 focus-group interviews with African American and European American participants, stratified by race and gender, from June to November 2008. We used a topic guide to facilitate discussion and identify factors contributing to perceived discrimination and analyzed transcripts for relevant themes using a codebook. Results. We enrolled 92 participants: 55 African Americans and 37 European Americans, all of whom reported perceived discrimination and lower patient satisfaction as a result of interactions with nonphysician health care staff. Perceived discrimination was associated with 2 main characteristics: insurance or socioeconomic status and race. Both verbal and nonverbal communication style on the part of nonphysician health care staff were related to individuals’ perceptions of how they were treated. Conclusions. The behaviors of nonphysician health care staff in the clinical setting can potentially contribute to patients’ perceptions of discrimination and lowered patient satisfaction. Future interventions to reduce health care discrimination should include a focus on staff cultural competence and customer service skills. PMID:26270291

Blade system design studies volume II : preliminary blade designs and recommended test matrix.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffin, Dayton A.

2004-06-01

As part of the U.S. Department of Energy's Wind Partnerships for Advanced Component Technologies (WindPACT) program, Global Energy Concepts, LLC is performing a Blade System Design Study (BSDS) concerning innovations in materials, processes and structural configurations for application to wind turbine blades in the multi-megawatt range. The BSDS Volume I project report addresses issues and constraints identified to scaling conventional blade designs to the megawatt size range, and evaluated candidate materials, manufacturing and design innovations for overcoming and improving large blade economics. The current report (Volume II), presents additional discussion of materials and manufacturing issues for large blades, including amore » summary of current trends in commercial blade manufacturing. Specifications are then developed to guide the preliminary design of MW-scale blades. Using preliminary design calculations for a 3.0 MW blade, parametric analyses are performed to quantify the potential benefits in stiffness and decreased gravity loading by replacement of a baseline fiberglass spar with carbon-fiberglass hybrid material. Complete preliminary designs are then presented for 3.0 MW and 5.0 MW blades that incorporate fiberglass-to-carbon transitions at mid-span. Based on analysis of these designs, technical issues are identified and discussed. Finally, recommendations are made for composites testing under Part I1 of the BSDS, and the initial planned test matrix for that program is presented.« less

U.S. hookah tobacco smoking establishments advertised on the internet.

PubMed

Primack, Brian A; Rice, Kristen R; Shensa, Ariel; Carroll, Mary V; DePenna, Erica J; Nakkash, Rima; Barnett, Tracey E

2012-02-01

Establishments dedicated to hookah tobacco smoking recently have proliferated and helped introduce hookah use to U.S. communities. To conduct a comprehensive, qualitative assessment of websites promoting these establishments. In June 2009, a systematic search process was initiated to access the universe of websites representing major hookah tobacco smoking establishments. In 2009-2010, codebook development followed an iterative paradigm involving three researchers and resulted in a final codebook consisting of 36 codes within eight categories. After two independent coders had nearly perfect agreement (Cohen's κ = 0.93) on double-coding the data in the first 20% of sites, the coders divided the remaining sites and coded them independently. A thematic approach to the synthesis of findings and selection of exemplary quotations was used. The search yielded a sample of 144 websites originating from states in all U.S. regions. Among the hookah establishments promoted on the websites, 79% served food and 41% served alcohol. Of the websites, none required age verification, <1% included a tobacco-related warning on the first page, and 4% included a warning on any page. Although mention of the word tobacco was relatively uncommon (appearing on the first page of only 26% sites and on any page of 58% of sites), the promotion of flavorings, pleasure, relaxation, product quality, and cultural and social aspects of hookah smoking was common. Websites may play a role in enhancing or propagating misinformation related to hookah tobacco smoking. Health education and policy measures may be valuable in countering this misinformation. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Plant Operations for Wastewater Facilities, Vol. II, Part D. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part E. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part B. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part A. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part C. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT XIII, BATTERY SERVICE AND TESTING PROCEDURES--PART II.

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO FAMILIARIZE THE TRAINEE WITH PROCEDURES FOR SERVICING LEAD-ACID STORAGE BATTERIES USED ON DIESEL POWERED EQUIPMENT. TOPICS ARE (1) ELECTROLYTE AND SPECIFIC GRAVITY, (2) BATTERY CHARGING, (3) STORAGE BATTERY TYPES AND DESIGN, (4) BATTERY CAPACITY RATINGS, (5) BATTERY INSTALLATION, SERVICING, AND…

ASIST 2003: Part II: Panels.

ERIC Educational Resources Information Center

Proceedings of the ASIST Annual Meeting, 2003

2003-01-01

Forty-six panels address topics including women in information science; users and usability; information studies; reference services; information policies; standards; interface design; information retrieval; information networks; metadata; shared access; e-commerce in libraries; knowledge organization; information science theories; digitization;…

Desertification in the south Junggar Basin, 2000-2009: Part II. Model development and trend analysis

NASA Astrophysics Data System (ADS)

Jiang, Miao; Lin, Yi

2018-07-01

The substantial objective of desertification monitoring is to derive its development trend, which facilitates pre-making policies to handle its potential influences. Aiming at this extreme goal, previous studies have proposed a large number of remote sensing (RS) based methods to retrieve multifold indicators, as reviewed in Part I. However, most of these indicators individually capable of characterizing a single aspect of land attributes, e.g., albedo quantifying land surface reflectivity, cannot show a full picture of desertification processes; few comprehensive RS-based models have either been published. To fill this gap, this Part II was dedicated to developing a RS information model for comprehensively characterizing the desertification and deriving its trend, based on the indicators retrieved in Part I in the same case of the south Junggar Basin, China in the last decade (2000-2009). The proposed model was designed to have three dominant component modules, i.e., the vegetation-relevant sub-model, the soil-relevant sub-model, and the water-relevant sub-model, which synthesize all of the retrieved indicators to integrally reflect the processes of desertification; based on the model-output indices, the desertification trends were derived using the least absolute deviation fitting algorithm. Tests indicated that the proposed model did work and the study area showed different development tendencies for different desertification levels. Overall, this Part II established a new comprehensive RS information model for desertification risk assessment and its trend deriving, and the whole study comprising Part I and Part II advanced a relatively standard framework for RS-based desertification monitoring.

77 FR 63927 - Endangered and Threatened Wildlife and Plants; Listing 15 Species on Hawaii Island as Endangered...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-17

... Vol. 77 Wednesday, No. 201 October 17, 2012 Part II Department of the Interior Fish and Wildlife... THE INTERIOR Fish and Wildlife Service 50 CFR Part 17 [Docket Number FWS-R1-ES-2012-0070: 4500030113... Endangered and Designating Critical Habitat for 3 Species AGENCY: Fish and Wildlife Service, Interior. ACTION...

40 CFR 1048.615 - What are the provisions for exempting engines designed for lawn and garden applications?

Code of Federal Regulations, 2010 CFR

2010-07-01

... certificate of conformity showing that it meets emission standards for Class II engines under 40 CFR part 90... requirements and restrictions of 40 CFR part 90 or 1054 apply to anyone manufacturing these engines, anyone manufacturing equipment that uses these engines, and all other persons in the same manner as if these engines...

Project FARE task III report : urban mass transportation industry reporting system design : interim task III report for November 1972-June 1973 period. Part II - Reporting system instructions.

DOT National Transportation Integrated Search

1973-06-01

This report contains a description of the proposed uniform reporting system for the urban mass transit industry. It is presented in four volumes: Part I - Task Summary contains a description of how Task III was accomplished and the conclusions and re...

12 CFR Appendix C to Part 1002 - Sample Notification Forms

Code of Federal Regulations, 2014 CFR

2014-01-01

... §§ 1002.9(a)(1) and (2)(ii). Form C-6 is designed for use in notifying an applicant, under § 1002.9(c)(2... applications for business credit under § 1002.9(a)(3). Form C-9 is designed for use in notifying an applicant of the right to receive a copy of an appraisal under § 1002.14. Form C-10 is designed for use in...

From Hippocrates to HIPAA: privacy and confidentiality in emergency medicine--Part II: Challenges in the emergency department.

PubMed

Moskop, John C; Marco, Catherine A; Larkin, Gregory Luke; Geiderman, Joel M; Derse, Arthur R

2005-01-01

Part I of this article reviewed the concepts of privacy and confidentiality and described the moral and legal foundations and limits of these values in health care. Part II highlights specific privacy and confidentiality issues encountered in the emergency department (ED). Discussed first are physical privacy issues in the ED, including problems of ED design and crowding, issues of patient and staff safety, the presence of visitors, law enforcement officers, students, and other observers, and filming activities. The article then examines confidentiality issues in the ED, including protecting medical records, the duty to warn, reportable conditions, telephone inquiries, media requests, communication among health care professionals, habitual patient files, the use of patient images, electronic communication, and information about minor patients.

Characterization of cDNA for human tripeptidyl peptidase II: The N-terminal part of the enzyme is similar to subtilisin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tomkinson, B.; Jonsson, A-K

1991-01-01

Tripeptidyl peptidase II is a high molecular weight serine exopeptidase, which has been purified from rat liver and human erythrocytes. Four clones, representing 4453 bp, or 90{percent} of the mRNA of the human enzyme, have been isolated from two different cDNA libraries. One clone, designated A2, was obtained after screening a human B-lymphocyte cDNA library with a degenerated oligonucleotide mixture. The B-lymphocyte cDNA library, obtained from human fibroblasts, were rescreened with a 147 bp fragment from the 5{prime} part of the A2 clone, whereby three different overlapping cDNA clones could be isolated. The deduced amino acid sequence, 1196 amino acidmore » residues, corresponding to the longest open rading frame of the assembled nucleotide sequence, was compared to sequences of current databases. This revealed a 56{percent} similarity between the bacterial enzyme subtilisin and the N-terminal part of tripeptidyl peptidase II. The enzyme was found to be represented by two different mRNAs of 4.2 and 5.0 kilobases, respectively, which probably result from the utilziation of two different polyadenylation sites. Futhermore, cDNA corresponding to both the N-terminal and C-terminal part of tripeptidyl peptidase II hybridized with genomic DNA from mouse, horse, calf, and hen, even under fairly high stringency conditions, indicating that tripeptidyl peptidase II is highly conserved.« less

Part I. Synthesis and Characterization of Donor-Pi-Acceptor Compounds with Pentadienyl-Bridged Indoline and Tetrahydroquinoline Donors and Aldehyde and Thiobarbituric Acid Acceptors Part II. Longitudinal Study Comparing Online versus Face-to-Face Course Delivery in Introductory Chemistry

ERIC Educational Resources Information Center

Greco, Patrick F.

2012-01-01

Part I. The design and development of organic second-order nonlinear optical (NLO) materials have attracted much interest due to their applications in optoelectronic devices and modern communications technology. Donor-pi-acceptor compounds, D-(CH=CH)[subscript n]-A, often exhibit hyperpolarizability that results in laser frequency doubling (second…

Paratransit Handbook : a Guide to Paratransit System Implementation volume II - parts 4 and 5

DOT National Transportation Integrated Search

1979-02-01

This Paratransit Handbook has been developed to aid public officials, planners and system operators in planning, designing, implementing, operating and evaluating integrated paratransit systems. The Handbook represents a compedium of techniques and e...

19 CFR 10.233 - Articles eligible for preferential tariff treatment.

Code of Federal Regulations, 2012 CFR

2012-04-01

... U.S. Note 2(b), Subchapter II, Chapter 98, HTSUS (see § 10.26): (1) Footwear not designated on... those watches or watch parts contain any material which is the product of any country with respect to...

19 CFR 10.233 - Articles eligible for preferential tariff treatment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... U.S. Note 2(b), Subchapter II, Chapter 98, HTSUS (see § 10.26): (1) Footwear not designated on... those watches or watch parts contain any material which is the product of any country with respect to...

19 CFR 10.233 - Articles eligible for preferential tariff treatment.

Code of Federal Regulations, 2011 CFR

2011-04-01

... U.S. Note 2(b), Subchapter II, Chapter 98, HTSUS (see § 10.26): (1) Footwear not designated on... those watches or watch parts contain any material which is the product of any country with respect to...

19 CFR 10.233 - Articles eligible for preferential tariff treatment.

Code of Federal Regulations, 2013 CFR

2013-04-01

... U.S. Note 2(b), Subchapter II, Chapter 98, HTSUS (see § 10.26): (1) Footwear not designated on... those watches or watch parts contain any material which is the product of any country with respect to...

19 CFR 10.233 - Articles eligible for preferential tariff treatment.

Code of Federal Regulations, 2014 CFR

2014-04-01

... U.S. Note 2(b), Subchapter II, Chapter 98, HTSUS (see § 10.26): (1) Footwear not designated on... those watches or watch parts contain any material which is the product of any country with respect to...

Phase I, open-cycle absorption solar cooling. Part IV. Executive summary analysis and resolution of critical issues and recommendations for Phase II. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, B.D.

The objective of this project is to advance lower cost solar cooling technology with the feasibility analysis, design and evaluation of proof-of-concept open cycle solar cooling concepts. The work is divided into three phases, with planned completion of each phase before proceeding with the following phase: Phase I - performance/economic/environmental related analysis and exploratory studies; Phase II - design and construction of an experimental system, including evaluative testing; Phase III - extended system testing during operation and engineering modifications as required. For Phase I, analysis and resolution of critical issues were completed with the objective of developing design specifications formore » an improved prototype OCA system.« less

Cattaraugus Creek Harbor, New York General Design Memorandum. Phase II. (Detailed Design). Volume II. Appendix E. Littoral Processes and Sedimentation in the Cattaraugus Embayment, New York. Appendix F. Sediment Transport in Cattaraugus Creek.

DTIC Science & Technology

1976-03-01

beaches than any other part of the southeastern shoreline of Lake Erie . It is the only major sand accumulation zone with the exception of Presque Isle , in...52 20. Photographs of zonal site #10. 54 21. Photograph and map of zonal site #11, Presque Isle , Pa. 57 F22. Photographs and beach profiles at zonal...site #11. 59 23. Photograph of zonal site #12, the recurved spit area on Presque Isle , Pa. 62 24. Block diagram of recurved spit area of Presque Isle

Innovative grinding wheel design for cost-effective machining of advanced ceramics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Licht, R.H.; Kuo, P.; Liu, S.

2000-05-01

This Final Report covers the Phase II Innovative Grinding Wheel (IGW) program in which Norton Company successfully developed a novel grinding wheel for cost-effective cylindrical grinding of advanced ceramics. In 1995, Norton Company successfully completed the 16-month Phase I technical effort to define requirements, design, develop, and evaluate a next-generation grinding wheel for cost-effective cylindrical grinding of advanced ceramics using small prototype wheels. The Phase II program was initiated to scale-up the new superabrasive wheel specification to larger diameters, 305-mm to 406-mm, required for most production grinding of cylindrical ceramic parts, and to perform in-house and independent validation grinding tests.

49 CFR Appendix A to Part 214 - Schedule of Civil Penalties 1

Code of Federal Regulations, 2010 CFR

2010-10-01

...,000 Subpart C—Roadway Worker Protection Rule 214.303 Railroad on-track safety programs, generally: (a... briefing 2,000 5,000 (c)(i) Failure to designate roadway worker in charge of roadway work group 2,000 5,000 (ii) Designation of more than one roadway worker in charge of one roadway work group 1,000 2,000 (iii...

A Design that Shares Itself. Learning by Design: Part II

ERIC Educational Resources Information Center

Theimer, James E.

2009-01-01

As a society, we need to have the right environmental decisions become ingrained in the mindset of our children in order to be successful at maintaining the long-term health of our planet. We can achieve that best at home and through our schools. For schools to become good teachers of environmental health, those who determine how schools get built…

2005 Service Academies: Sexual Assault Survey: Administration, Datasets and Codebook

DTIC Science & Technology

2005-10-01

sex w/you-Uned 326 SB026SK* [26sk] Situation w/ greatest eff -Skip 204 SB027* 27. [27---] In which semester did this occur 205 SB027U* [27...Tab recode SB038CR: Commis Officer COC 669 SB038CU* [38c] Retal by officer in chain o c-Uned 370 SB038D* 38d. [38d] Retal by other academy...sex w/you 203 SB026SK [26sk] Situation w/ greatest eff -Skip 204 SB027 27. [27---] In which semester did this occur 205 SB028 28. [28---] Where

The 1984 ARI Survey of Army Recruits: Codebook for Summer 84 USAR and ARNG Survey Respondents

DTIC Science & Technology

1986-05-01

THE FOLLOWING PROGRAMS OR PROGRAMMING TYPES ON TV: NBA BASKETBALL . RAW DATA ICARD #I COLS ILENGTHI I _ _ _ I _ _ I _ _ _ I05 0-2-043 20I __ I I SAS...LEAG BASEBALL REG SEAS 249 T259 WATCH TV PROG:MJR LEAG BASEBALL PLAYOFFS 250 T260 WATCH TV PROG:WORLD SERIES 251 V T261 WATCH TV PROG:NBA BASKETBALL 252...T262 WATCH TV PROG:COLLEGE BASKETBALL 253 T263 WATCH TV PROG:NHL HOCKEY 254 T264 WATCH TV PROG:PROFESSIONAL WRESTLING 255 T265 WATCH TV PROG:CAR RACES

On-Line Remote Catalog Access and Circulation Control System. Part I: Functional Specifications. Part II: User's Manual.

ERIC Educational Resources Information Center

International Business Machines Corp., Gaithersburg, MD. Data Processing Div.

The Ohio State University Libraries On-line Remote Catalog Access and Circulation Control System (LCS) began on-line operations with the conversion of one department library in November 1970. By December all 26 libraries had been converted to the automated system and LCS was fully operational one month ahead of schedule. LCS is designed as a…

The Assessment of Business and Industry Needs; Phase II of Multi-County Assessment of Adult Needs Project (MAP).

ERIC Educational Resources Information Center

Ferguson, L. G.; And Others

In order to assess the felt needs and interests of the local population and business community relative to education and training, a survey was designed and implemented in the four-county area surrounding Waco, Texas. This volume, part two of a three part series, documents the work done in developing and conducting the business and industry…

Dedos de Luna. Children's Literature in Spanish: Bilingual Edition. Guia para maestros en espanol e ingles. Elementary Literature Series, Part II.

ERIC Educational Resources Information Center

Walker, Dana; Huerta, Mario

This curriculum unit is designed to give primary school students foreign language experiences and also to support the cultural literacy strand of the California State History-Social Science Framework. The unit is part of an elementary literature series which utilizes quality primary source literature from various world regions and countries and…

Project on Teaching Charts and Graphs to ABE Students. Part I: Teacher's Guide [and] Part II: Transparency Assembly Package.

ERIC Educational Resources Information Center

Renton Vocational Inst., WA.

The teacher's guide and collection of transparency masters are designed for use in teaching adult basic education (ABE) students how to read and interpret graphs and charts. Covered in the individual lessons of the instructional unit are the reading and interpretation of charts as well as picture, line, bar, and circle graphs. Each unit contains a…

15 CFR 744.6 - Restrictions on certain activities of U.S. persons.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... 1 to part 740 of the EAR). (B) Will be used in the design, development, production, or use of missiles in or by a country listed in Country Group D:4 (see supplement no. 1 to part 740 of the EAR); or... 740 of the EAR); or (ii) Perform any contract, service, or employment that the U.S. person knows will...

Efficacy, Outcomes, and Empowerment Evaluation of a School District NET Project, Part II: School and Community Impact. Research Brief.

ERIC Educational Resources Information Center

Miller-Whitehead, Marie

This study addressed assessing the efficacy and outcomes of a U.S. Department of Agriculture Nutrition Education Training (NET) project designed to increase awareness of health risk and wellness factors for grade 9 students. Although this paper reprises results from a survey of 125 ninth graders about the NET curriculum, the focus of this part of…

Mathematics Through Science, Part II: Graphing, Equations and Linear Functions. Student Text. Revised Edition.

ERIC Educational Resources Information Center

Bolduc, Elroy J., Jr.; And Others

The purpose of this text is to teach learning and understanding of mathematics at grades seven through nine through the use of science experiments. Previous knowledge of science on the part of students or teachers is not necessary. The text is designed to be usable with any mathematics textbook in common use. The material can be covered in four…

Development of the AGREE II, part 2: assessment of validity of items and tools to support application

PubMed Central

Brouwers, Melissa C.; Kho, Michelle E.; Browman, George P.; Burgers, Jako S.; Cluzeau, Françoise; Feder, Gene; Fervers, Béatrice; Graham, Ian D.; Hanna, Steven E.; Makarski, Julie

2010-01-01

Background We established a program of research to improve the development, reporting and evaluation of practice guidelines. We assessed the construct validity of the items and user’s manual in the β version of the AGREE II. Methods We designed guideline excerpts reflecting high-and low-quality guideline content for 21 of the 23 items in the tool. We designed two study packages so that one low-quality and one high-quality version of each item were randomly assigned to each package. We randomly assigned 30 participants to one of the two packages. Participants reviewed and rated the guideline content according to the instructions of the user’s manual and completed a survey assessing the manual. Results In all cases, content designed to be of high quality was rated higher than low-quality content; in 18 of 21 cases, the differences were significant (p < 0.05). The manual was rated by participants as appropriate, easy to use, and helpful in differentiating guidelines of varying quality, with all scores above the mid-point of the seven-point scale. Considerable feedback was offered on how the items and manual of the β-AGREE II could be improved. Interpretation The validity of the items was established and the user’s manual was rated as highly useful by users. We used these results and those of our study presented in part 1 to modify the items and user’s manual. We recommend AGREE II (available at www.agreetrust.org) as the revised standard for guideline development, reporting and evaluation. PMID:20513779

40 CFR 86.1809-12 - Prohibition of defeat devices.

Code of Federal Regulations, 2012 CFR

2012-07-01

... programs, engineering evaluations, design specifications, calibrations, on-board computer algorithms, and... manufacturer must submit, with the Part II certification application, an engineering evaluation demonstrating... vehicles, the engineering evaluation must also include particulate emissions. [75 FR 25685, May 7, 2010] ...

TORO II: A finite element computer program for nonlinear quasi-static problems in electromagnetics: Part 1, Theoretical background

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gartling, D.K.

The theoretical and numerical background for the finite element computer program, TORO II, is presented in detail. TORO II is designed for the multi-dimensional analysis of nonlinear, electromagnetic field problems described by the quasi-static form of Maxwell`s equations. A general description of the boundary value problems treated by the program is presented. The finite element formulation and the associated numerical methods used in TORO II are also outlined. Instructions for the use of the code are documented in SAND96-0903; examples of problems analyzed with the code are also provided in the user`s manual. 24 refs., 8 figs.

Detecting Controller Malfunctions in Electromagnetic Environments. Part 1; Modeling and Estimation of Nominal System Function

NASA Technical Reports Server (NTRS)

Weinstein, Bernice

1999-01-01

A strategy for detecting control law calculation errors in critical flight control computers during laboratory validation testing is presented. This paper addresses Part I of the detection strategy which involves the use of modeling of the aircraft control laws and the design of Kalman filters to predict the correct control commands. Part II of the strategy which involves the use of the predicted control commands to detect control command errors is presented in the companion paper.

LCLS-II 1.3 GHz cryomodule design - lessons learned from testing at Fermilab

NASA Astrophysics Data System (ADS)

Kaluzny, J.; Hurd, J.; Orlov, Y.; He, Y.; Bossert, R.; Grimm, C.; Schappert, W.; Atassi, O. Al; Wang, R.; Arkan, T.; Theilacker, J.; Klebaner, A.; White, M.; Wu, G.; Makara, J.; Ginsburg, C.; Pei, L.; Holzbauer, J.; Hansen, B.; Stanek, R.; Peterson, T.; Harms, E.

2017-12-01

Fermilab’s 1.3 GHz prototype cryomodule for the Linac Coherent Light Source Upgrade (LCLS-II) has been tested at Fermilab’s Cryomodule Test Facility (CMTF). Aspects of the cryomodule design have been studied and tested. The cooldown circuit was used to quickly cool the cavities through the transition temperature, and a heater on the circuit was used to heat incoming helium for warmup. Due to the 0.5% slope of the cryomodule, the liquid level is not constant along the length of the cryomodule. This slope as well as the pressure profile caused liquid level management to be a challenge. The microphonics levels in the cryomodule were studied and efforts were made to reduce them throughout testing. Some of the design approaches and studies performed on these aspects will be presented. Fermilab is operated by Fermi Research Alliance, LLC under Contract No. De-AC02-07CH11359 with the United States Department of Energy. This work was supported, in part, by the LCLS-II Project.

Constrained model predictive control, state estimation and coordination

NASA Astrophysics Data System (ADS)

Yan, Jun

In this dissertation, we study the interaction between the control performance and the quality of the state estimation in a constrained Model Predictive Control (MPC) framework for systems with stochastic disturbances. This consists of three parts: (i) the development of a constrained MPC formulation that adapts to the quality of the state estimation via constraints; (ii) the application of such a control law in a multi-vehicle formation coordinated control problem in which each vehicle operates subject to a no-collision constraint posed by others' imperfect prediction computed from finite bit-rate, communicated data; (iii) the design of the predictors and the communication resource assignment problem that satisfy the performance requirement from Part (ii). Model Predictive Control (MPC) is of interest because it is one of the few control design methods which preserves standard design variables and yet handles constraints. MPC is normally posed as a full-state feedback control and is implemented in a certainty-equivalence fashion with best estimates of the states being used in place of the exact state. However, if the state constraints were handled in the same certainty-equivalence fashion, the resulting control law could drive the real state to violate the constraints frequently. Part (i) focuses on exploring the inclusion of state estimates into the constraints. It does this by applying constrained MPC to a system with stochastic disturbances. The stochastic nature of the problem requires re-posing the constraints in a probabilistic form. In Part (ii), we consider applying constrained MPC as a local control law in a coordinated control problem of a group of distributed autonomous systems. Interactions between the systems are captured via constraints. First, we inspect the application of constrained MPC to a completely deterministic case. Formation stability theorems are derived for the subsystems and conditions on the local constraint set are derived in order to guarantee local stability or convergence to a target state. If these conditions are met for all subsystems, then this stability is inherited by the overall system. For the case when each subsystem suffers from disturbances in the dynamics, own self-measurement noises, and quantization errors on neighbors' information due to the finite-bit-rate channels, the constrained MPC strategy developed in Part (i) is appropriate to apply. In Part (iii), we discuss the local predictor design and bandwidth assignment problem in a coordinated vehicle formation context. The MPC controller used in Part (ii) relates the formation control performance and the information quality in the way that large standoff implies conservative performance. We first develop an LMI (Linear Matrix Inequality) formulation for cross-estimator design in a simple two-vehicle scenario with non-standard information: one vehicle does not have access to the other's exact control value applied at each sampling time, but to its known, pre-computed, coupling linear feedback control law. Then a similar LMI problem is formulated for the bandwidth assignment problem that minimizes the total number of bits by adjusting the prediction gain matrices and the number of bits assigned to each variable. (Abstract shortened by UMI.)

Noche del Sol. Que Bonito Es Leer, II. Libro III. Guia Para el Maestro (Night of the Sun. How Nice Reading Is, II. Book III. Teacher's Guide).

ERIC Educational Resources Information Center

Dissemination and Assessment Center for Bilingual Education, Austin, TX.

The Spanish language teacher's guide is part of the third level of a series of supplementary materials designed for teaching second grade reading in Spanish. The manual is a detailed guide to the use of the reader and workbook of the same title. It contains an explanatory introduction and an extensive list of objectives, for each of the five to…

A constrained joint source/channel coder design and vector quantization of nonstationary sources

NASA Technical Reports Server (NTRS)

Sayood, Khalid; Chen, Y. C.; Nori, S.; Araj, A.

1993-01-01

The emergence of broadband ISDN as the network for the future brings with it the promise of integration of all proposed services in a flexible environment. In order to achieve this flexibility, asynchronous transfer mode (ATM) has been proposed as the transfer technique. During this period a study was conducted on the bridging of network transmission performance and video coding. The successful transmission of variable bit rate video over ATM networks relies on the interaction between the video coding algorithm and the ATM networks. Two aspects of networks that determine the efficiency of video transmission are the resource allocation algorithm and the congestion control algorithm. These are explained in this report. Vector quantization (VQ) is one of the more popular compression techniques to appear in the last twenty years. Numerous compression techniques, which incorporate VQ, have been proposed. While the LBG VQ provides excellent compression, there are also several drawbacks to the use of the LBG quantizers including search complexity and memory requirements, and a mismatch between the codebook and the inputs. The latter mainly stems from the fact that the VQ is generally designed for a specific rate and a specific class of inputs. In this work, an adaptive technique is proposed for vector quantization of images and video sequences. This technique is an extension of the recursively indexed scalar quantization (RISQ) algorithm.

Quantum Mechanical Study of Atoms and Molecules

NASA Technical Reports Server (NTRS)

Sahni, R. C.

1961-01-01

This paper, following a brief introduction, is divided into five parts. Part I outlines the theory of the molecular orbital method for the ground, ionized and excited states of molecules. Part II gives a brief summary of the interaction integrals and their tabulation. Part III outlines an automatic program designed for the computation of various states of molecules. Part IV gives examples of the study of ground, ionized and excited states of CO, BH and N2 where the program of automatic computation and molecular integrals have been utilized. Part V enlists some special problems of Molecular Quantum Mechanics are being tackled at New York University.

Statistical Tolerance and Clearance Analysis for Assembly

NASA Technical Reports Server (NTRS)

Lee, S.; Yi, C.

1996-01-01

Tolerance is inevitable because manufacturing exactly equal parts is known to be impossible. Furthermore, the specification of tolerances is an integral part of product design since tolerances directly affect the assemblability, functionality, manufacturability, and cost effectiveness of a product. In this paper, we present statistical tolerance and clearance analysis for the assembly. Our proposed work is expected to make the following contributions: (i) to help the designers to evaluate products for assemblability, (ii) to provide a new perspective to tolerance problems, and (iii) to provide a tolerance analysis tool which can be incorporated into a CAD or solid modeling system.

Design and synthesis of a tetradentate '3-amine-1-carboxylate' ligand to mimic the metal binding environment at the non-heme iron(II) oxidase active site.

PubMed

Dungan, Victoria J; Ortin, Yannick; Mueller-Bunz, Helge; Rutledge, Peter J

2010-04-07

Non-heme iron(II) oxidases (NHIOs) catalyse a diverse array of oxidative chemistry in Nature. As part of ongoing efforts to realize biomimetic, iron-mediated C-H activation, we report the synthesis of a new 'three-amine-one-carboxylate' ligand designed to complex with iron(II) and mimic the NHIO active site. The tetradentate ligand has been prepared as a single enantiomer in nine synthetic steps from N-Cbz-L-alanine, pyridine-2,6-dimethanol and diphenylamine, using Seebach oxazolidinone chemistry to control the stereochemistry. X-Ray crystal structures are reported for two important intermediates, along with variable temperature NMR experiments to probe the hindered interconversion of conformational isomers of several key intermediates, 2,6-disubstituted pyridine derivatives. The target ligand and an N-Cbz-protected precursor were each then complexed with iron(II) and tested for their ability to promote alkene dihydroxylation, using hydrogen peroxide as the oxidant.

Machine Protection System Research and Development for the Fermilab PIP-II Proton Linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warner, Arden; Carmichael, Linden; Harrison, Beau

PIP-II is a high intensity proton linac being design to support a world-leading physics program at Fermilab. Initially it will provide high intensity beams for Fermilab's neutrino program with a future extension to other applications requiring an upgrade to CW linac operation (e.g. muon experiments). The machine is conceived to be 2 mA CW, 800 MeV H⁻ linac capable of working initially in a pulse (0.55 ms, 20 Hz) mode for injection into the existing Booster. The planned upgrade to CW operation implies that the total beam current and damage potential will be greater than in any present HEP hadronmore » linac. To mitigate the primary technical risk and challenges associated PIP-II an integrated system test for the PIP-II front-end technology is being developed. As part of the R&D a robust machine protection system (MPS) is being designed. This paper describes the progress and challenges associated with the MPS.« less

Port Needs Study (Vessel Traffic Services Benefits) : Volume 2. Appendices, Part 1.

DOT National Transportation Integrated Search

1991-08-01

Volume II focuses on organization and presentation of information for each individual study zone. It contains the appendix tables of input data, output statistics and the documentation of the candidate Vessel Traffic Service (VTS) Design by NavCom Sy...

40 CFR 86.1809-10 - Prohibition of defeat devices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... programs, engineering evaluations, design specifications, calibrations, on-board computer algorithms, and..., with the Part II certification application, an engineering evaluation demonstrating to the satisfaction... not occur in the temperature range of 20 to 86 °F. For diesel vehicles, the engineering evaluation...

U.S. Transit Track Restraining Rail. Volume II : Guidelines.

DOT National Transportation Integrated Search

1981-12-01

This report covers a study of restraining rails in transit track, which is part of the current research program of UMTA and was initiated: (1) to assist in the analysis, design, and maintenance and operation of transit track; (2) to compile guideline...

Port Needs Study (Vessel Traffic Services Benefits) : Volume 2. Appendices, Part 2.

DOT National Transportation Integrated Search

1991-01-01

Volume II focuses on organization and presentation of information for each individual study zone. It contains the appendix tables of input data, output statistics and the documentation of the candidate Vessel Traffic Services (VTS) Design by NavCom S...

48 CFR 44.202-2 - Considerations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... contract requirements regarding— (i) Small business subcontracting, including, if applicable, its plan for...-owned small business concerns (see part 19); and (ii) Purchase from nonprofit agencies designated by the... officer responsible for consent must, at a minimum, review the request and supporting data and consider...

Design/Drafting (Graphic Communications). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

ERIC Educational Resources Information Center

Poehls, Eddie; And Others

This course guide for a design/drafting course is one of four developed for the graphic communications area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and production.) Part 1 provides such introductory information as a definition and…

Aerosolization Characteristics of Hard Impact Testing of Depleted Uranium Penetrators

DTIC Science & Technology

1982-10-01

meters (8 feet) deep half-cylinder, which is designed to prevent sabot parts from travelling laterally after impaction. The PFT is located about 15...specially designed , cut and perforated collection filter. Configuration I is used for staces one and three while Configuration II is used for stages two...official Department of the Army position, unless so designated by other authorized documents. d0#8 Wt oWnsti~tute indo?.dment of an ome, I producot

Globalization, localization and food culture: perceived roles of social and cultural capitals in healthy child feeding practices in Japan.

PubMed

Goto, Keiko; Ominami, Chihiro; Song, Chunyan; Murayama, Nobuko; Wolff, Cindy

2014-03-01

The current study examined parental perceptions of sociocultural factors associated with healthy child feeding practices among parents of preschool-age children in rural Japan. Fifteen Japanese mothers of preschool-age children participated in this qualitative study. These participants were aged 22-39 years and resided in a rural town in western Japan. We conducted semi-structured qualitative interviews to assess parental perceptions of healthy child feeding practices and their relationships with globalization and localization. These interviews were transcribed, translated into English and coded, based on the principles of grounded theory. A codebook was developed and pre-identified, and the newly-identified themes from this codebook were examined and compared. Overall, local and seasonal foods, along with traditional Japanese foods and simple foods (soshoku), were considered to be beneficial for children. Participants also noted that children were expected to be mindful and exhibit good table manners that reflect cultural values related to meal-time socializing or family bonding, and food appreciation. On the other hand, the majority of the participants stated that foods containing food additives and imported foods were unsuitable for children. Participants noted that strong social capital, especially social support from their mothers or mothers-in-law, as well as social networks for obtaining fresh local foods, contributed to healthy child feeding practices. Cultural capital (including the preservation of traditional Japanese dietary habits, eating rules and inter-generational commensality), was also identified as being key to healthy feeding practices. Identifying and promoting the social and cultural capital that positively support healthy child feeding practices may be an important component of nutrition education programs.

Situation Model for Situation-Aware Assistance of Dementia Patients in Outdoor Mobility

PubMed Central

Yordanova, Kristina; Koldrack, Philipp; Heine, Christina; Henkel, Ron; Martin, Mike; Teipel, Stefan; Kirste, Thomas

2017-01-01

Background: Dementia impairs spatial orientation and route planning, thus often affecting the patient’s ability to move outdoors and maintain social activities. Situation-aware deliberative assistive technology devices (ATD) can substitute impaired cognitive function in order to maintain one’s level of social activity. To build such a system, one needs domain knowledge about the patient’s situation and needs. We call this collection of knowledge situation model. Objective: To construct a situation model for the outdoor mobility of people with dementia (PwD). The model serves two purposes: 1) as a knowledge base from which to build an ATD describing the mobility of PwD; and 2) as a codebook for the annotation of the recorded behavior. Methods: We perform systematic knowledge elicitation to obtain the relevant knowledge. The OBO Edit tool is used for implementing and validating the situation model. The model is evaluated by using it as a codebook for annotating the behavior of PwD during a mobility study and interrater agreement is computed. In addition, clinical experts perform manual evaluation and curation of the model. Results: The situation model consists of 101 concepts with 11 relation types between them. The results from the annotation showed substantial overlapping between two annotators (Cohen’s kappa of 0.61). Conclusion: The situation model is a first attempt to systematically collect and organize information related to the outdoor mobility of PwD for the purposes of situation-aware assistance. The model is the base for building an ATD able to provide situation-aware assistance and to potentially improve the quality of life of PwD. PMID:29060937

Realization of entry-to-practice milestones by Canadians who studied medicine abroad and other international medical graduates: a retrospective cohort study.

PubMed

Mathews, Maria; Kandar, Rima; Slade, Steve; Yi, Yanqing; Beardall, Sue; Bourgeault, Ivy

2017-06-19

International medical graduates must realize a series of milestones to obtain full licensure. We examined the realization of milestones by Canadian and non-Canadian graduates of Western or Caribbean medical schools, and Canadian and non-Canadian graduates from other medical schools. Using the National IMG Database (data available for 2005-2011), we created 2 cohorts: 1) international medical graduates who had passed the Medical Council of Canada Qualifying Examination Part I between 2005 and 2010 and 2) those who had first entered a family medicine postgraduate program between 2005 and 2009, or had first entered a specialty postgraduate program in 2005 or 2006. We examined 3 entry-to-practice milestones; obtaining a postgraduate position, passing the Medical Council of Canada Qualifying Examination Part II and obtaining a specialty designation. Of the 6925 eligible graduates in cohort 1, 2144 (31.0%) had obtained a postgraduate position. Of the 1214 eligible graduates in cohort 2, 1126 (92.8%) had passed the Qualifying Examination Part II, and 889 (73.2%) had obtained a specialty designation. In multivariate analyses, Canadian graduates of Western or Caribbean medical schools (odds ratio [OR] 4.69, 95% confidence interval [CI] 3.82-5.71) and Canadian graduates of other medical schools (OR 1.49, 95% CI 1.31-1.70) were more likely to obtain a postgraduate position than non-Canadian graduates of other (not Western or Caribbean) medical schools. There was no difference among the groups in passing the Qualifying Examination Part II or obtaining a specialty designation. Canadians who studied abroad were more likely than other international medical graduates to obtain a postgraduate position; there were no differences among the groups in realizing milestones once in a postgraduate program. These findings support policies that do not distinguish postgraduate applicants by citizenship or permanent residency status before medical school. Copyright 2017, Joule Inc. or its licensors.

A novel model of magnetorheological damper with hysteresis division

NASA Astrophysics Data System (ADS)

Yu, Jianqiang; Dong, Xiaomin; Zhang, Zonglun

2017-10-01

Due to the complex nonlinearity of magnetorheological (MR) behavior, the modeling of MR dampers is a challenge. A simple and effective model of MR damper remains a work in progress. A novel model of MR damper is proposed with force-velocity hysteresis division method in this study. A typical hysteresis loop of MR damper can be simply divided into two novel curves with the division idea. One is the backbone curve and the other is the branch curve. The exponential-family functions which capturing the characteristics of the two curves can simplify the model and improve the identification efficiency. To illustrate and validate the novel phenomenological model with hysteresis division idea, a dual-end MR damper is designed and tested. Based on the experimental data, the characteristics of the novel curves are investigated. To simplify the parameters identification and obtain the reversibility, the maximum force part, the non-dimensional backbone part and the non-dimensional branch part are derived from the two curves. The maximum force part and the non-dimensional part are in multiplication type add-rule. The maximum force part is dependent on the current and maximum velocity. The non-dominated sorting genetic algorithm II (NSGA II) based on the design of experiments (DOE) is employed to identify the parameters of the normalized shape functions. Comparative analysis is conducted based on the identification results. The analysis shows that the novel model with few identification parameters has higher accuracy and better predictive ability.

PyXRF: Python-based X-ray fluorescence analysis package

NASA Astrophysics Data System (ADS)

Li, Li; Yan, Hanfei; Xu, Wei; Yu, Dantong; Heroux, Annie; Lee, Wah-Keat; Campbell, Stuart I.; Chu, Yong S.

2017-09-01

We developed a python-based fluorescence analysis package (PyXRF) at the National Synchrotron Light Source II (NSLS-II) for the X-ray fluorescence-microscopy beamlines, including Hard X-ray Nanoprobe (HXN), and Submicron Resolution X-ray Spectroscopy (SRX). This package contains a high-level fitting engine, a comprehensive commandline/ GUI design, rigorous physics calculations, and a visualization interface. PyXRF offers a method of automatically finding elements, so that users do not need to spend extra time selecting elements manually. Moreover, PyXRF provides a convenient and interactive way of adjusting fitting parameters with physical constraints. This will help us perform quantitative analysis, and find an appropriate initial guess for fitting. Furthermore, we also create an advanced mode for expert users to construct their own fitting strategies with a full control of each fitting parameter. PyXRF runs single-pixel fitting at a fast speed, which opens up the possibilities of viewing the results of fitting in real time during experiments. A convenient I/O interface was designed to obtain data directly from NSLS-II's experimental database. PyXRF is under open-source development and designed to be an integral part of NSLS-II's scientific computation library.

Remote monitoring of fatigue-sensitive details on bridges : [part I and II].

DOT National Transportation Integrated Search

2015-03-01

Fatigue is one of the most critical problems for steel bridges as well as for any steel structures that needs : to be considered during design and operation. The objectives of this study are to explore monitoring : technologies, and to develop effect...

A rapid method for soil cement design : Louisiana slope value method : part II : evaluation.

DOT National Transportation Integrated Search

1966-05-01

This report is an evaluation of the recently developed "Louisiana Slope Value Method". : The conclusion drawn are based on data from 637 separate samples representing nearly all major soil groups in Louisiana that are suitable for cement stabilizatio...

Automotive Manufacturing Assessment System : Volume 2. Product Schedules of Engine/Drivetrain Combinations.

DOT National Transportation Integrated Search

1979-11-01

Volume II is part of a four volume set documenting areas of research resulting from the development of the Automotive Manufacturing Assessment System (AMAS) for the DOT/Transportation Systems Center. AMAS was designed to assist in the evaluation of i...

Autogenous accelerated curing of concrete cylinders. Part I, Strength results.

DOT National Transportation Integrated Search

1971-01-01

Forty-eight different concrete mixes were designed to investigate the influence of cement types (II, III, and V), cement contents (450, 550, and 650 lb. per cu. yd.), water-cement ratios (0.4, 0.5, and 0.6), admixtures (accelerator, retarder, and air...

Autogenous accelerated curing of concrete cylinders. Part III, Temperature relationships.

DOT National Transportation Integrated Search

1971-01-01

Forty-eight different concrete mixes were designed to investigate the influence of cement types (II, III, and V), cement contents (450, 550, and 650 lb. per cu. yd.), water cement ratios (0.4, 0.5, and 0.6), admixtures (accelerator, retarder, and air...

Managing EEE part standardisation and procurement

NASA Astrophysics Data System (ADS)

Serieys, C.; Bensoussan, A.; Petitmangin, A.; Rigaud, M.; Barbaresco, P.; Lyan, C.

2002-12-01

This paper presents the development activities in space components selection and procurement dealing with a new data base tool implemented at Alcatel Space using TransForm softwaa re configurator developed by Techform S.A. Based on TransForm, Access Ingenierie has devv eloped a software product named OLG@DOS which facilitate the part nomenclatures analyses for new equipment design and manufacturing in term of ACCESS data base implementation. Hi-Rel EEE part type technical, production and quality information are collected and compiled usingproduction data base issued from production tools implemented for equipment definition, description and production based on Manufacturing Resource Planning (MRP II Control Open) and Parametric Design Manager (PDM Work Manager). The analysis of any new equipment nomenclature may be conducted through this means for standardisation purpose, cost containment program and management procurement activities as well as preparation of Component reviews as Part Approval Document and Declared Part List validation.

Pathfinder

NASA Image and Video Library

1997-06-04

This shot offers a bird's eye-view of a Fastrac II engine duration test at Marshall's Test Stand 116. The Fastrac II engine was designed as a part of the low cost X-34 Reusable Launch Vehicle (RLV). The purpose for these tests was to test the different types of metal alloys in the nozzle. Beside the engine were six additional nozzels which spray a continuous stream of water onto the test stand to reduce damage to the test stand and the engines. The X-34 program was cancelled in 2001.

Reducing Traumatic Brain Injuries in Youth Sports: Youth Sports Traumatic Brain Injury State Laws, January 2009–December 2012

PubMed Central

2013-01-01

Objectives. I sought to describe current state-wide youth sports traumatic brain injury (TBI) laws and their relationship to prevailing scientific understandings of youth sports TBIs, and to facilitate further research by creating an open-source data set of current laws. Methods. I used Westlaw and LexisNexis databases to create a 50-state data set of youth sports TBI laws enacted between January 2009 and December 2012. I collected and coded the text and citations of each law and developed a protocol and codebook to facilitate future research. Results. Forty-four states and Washington, DC, passed youth sports TBI laws between 2009 and 2012. No state’s youth sports TBI law focuses on primary prevention. Instead, such laws focus on (1) increasing coaches’ and parents’ ability to identify and respond to TBIs and (2) reducing the immediate risk of multiple TBIs. Conclusions. Existing youth sports TBI laws were not designed to reduce initial TBIs. Evaluation is required to assess their effectiveness in reducing the risk and consequences of multiple TBIs. Continued research and evaluation of existing laws will be needed to develop a more comprehensive youth TBI-reduction solution. PMID:23678903

Design, fabrication and test of the RL10 derivative II chamber/primary nozzle

NASA Technical Reports Server (NTRS)

Marable, R. W.

1989-01-01

The design, fabrication and test of the RL10-II chamber/primary nozzle was accomplished as part of the RL10 Product Improvement Program (PIP). The overall goal of the RL10 PIP was to gain the knowledge and experience necessary to develop new cryogenic upper stage engines to fulfill future NASA requirements. The goal would be reached by producing an RL10 engine designed to be reusable, operate at several thrust levels, and have increased performance. The goals for the chamber/primary nozzle task were: (1) to design a reusable assembly capable of operation at increased mixture ratio and low thrust; (2) to fabricate three assemblies using new or updated techniques where possible; and (3) to test one assembly to verify the design and construction. The design and fabrication phases produced an assembly having improved features such as single piece reinforcing band segments (i.e., Mae West segments) and relocated tube exit braze joints (i.e., hooked tube exit). In addition, a computer program was developed to design the chamber tubes to meet both performance and heat transfer requirements. The test phase showed the specific impulse of the test bed engine system to be as predicted. These results, along with the heat transfer data obtained, sufficiently proved the overall design of the RL10-II recontoured and shortened chamber/primary nozzle assembly.

Liquid Sloshing Dynamics

NASA Astrophysics Data System (ADS)

Ibrahim, Raouf A.

2005-06-01

The problem of liquid sloshing in moving or stationary containers remains of great concern to aerospace, civil, and nuclear engineers; physicists; designers of road tankers and ship tankers; and mathematicians. Beginning with the fundamentals of liquid sloshing theory, this book takes the reader systematically from basic theory to advanced analytical and experimental results in a self-contained and coherent format. The book is divided into four sections. Part I deals with the theory of linear liquid sloshing dynamics; Part II addresses the nonlinear theory of liquid sloshing dynamics, Faraday waves, and sloshing impacts; Part III presents the problem of linear and nonlinear interaction of liquid sloshing dynamics with elastic containers and supported structures; and Part IV considers the fluid dynamics in spinning containers and microgravity sloshing. This book will be invaluable to researchers and graduate students in mechanical and aeronautical engineering, designers of liquid containers, and applied mathematicians.

Near-Term Electric Vehicle Program. Phase II: Mid-Term Summary Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1978-08-01

The Near Term Electric Vehicle (NTEV) Program is a constituent elements of the overall national Electric and Hybrid Vehicle Program that is being implemented by the Department of Energy in accordance with the requirements of the Electric and Hybrid Vehicle Research, Development, and Demonstration Act of 1976. Phase II of the NTEV Program is focused on the detailed design and development, of complete electric integrated test vehicles that incorporate current and near-term technology, and meet specified DOE objectives. The activities described in this Mid-Term Summary Report are being carried out by two contractor teams. The prime contractors for these contractormore » teams are the General Electric Company and the Garrett Corporation. This report is divided into two discrete parts. Part 1 describes the progress of the General Electric team and Part 2 describes the progress of the Garrett team.« less

Dimensional and material characteristics of direct deposited tool steel by CO II laser

NASA Astrophysics Data System (ADS)

Choi, J.

2006-01-01

Laser aided direct metalimaterial deposition (DMD) process builds metallic parts layer-by-layer directly from the CAD representation. In general, the process uses powdered metaUmaterials fed into a melt pool, creating fully dense parts. Success of this technology in the die and tool industry depends on the parts quality to be achieved. To obtain designed geometric dimensions and material properties, delicate control of the parameters such as laser power, spot diameter, traverse speed and powder mass flow rate is critical. In this paper, the dimensional and material characteristics of directed deposited H13 tool steel by CO II laser are investigated for the DMD process with a feedback height control system. The relationships between DMD process variables and the product characteristics are analyzed using statistical techniques. The performance of the DMD process is examined with the material characteristics of hardness, porosity, microstructure, and composition.

A general framework for sensor-based human activity recognition.

PubMed

Köping, Lukas; Shirahama, Kimiaki; Grzegorzek, Marcin

2018-04-01

Today's wearable devices like smartphones, smartwatches and intelligent glasses collect a large amount of data from their built-in sensors like accelerometers and gyroscopes. These data can be used to identify a person's current activity and in turn can be utilised for applications in the field of personal fitness assistants or elderly care. However, developing such systems is subject to certain restrictions: (i) since more and more new sensors will be available in the future, activity recognition systems should be able to integrate these new sensors with a small amount of manual effort and (ii) such systems should avoid high acquisition costs for computational power. We propose a general framework that achieves an effective data integration based on the following two characteristics: Firstly, a smartphone is used to gather and temporally store data from different sensors and transfer these data to a central server. Thus, various sensors can be integrated into the system as long as they have programming interfaces to communicate with the smartphone. The second characteristic is a codebook-based feature learning approach that can encode data from each sensor into an effective feature vector only by tuning a few intuitive parameters. In the experiments, the framework is realised as a real-time activity recognition system that integrates eight sensors from a smartphone, smartwatch and smartglasses, and its effectiveness is validated from different perspectives such as accuracies, sensor combinations and sampling rates. Copyright © 2018 Elsevier Ltd. All rights reserved.

BESAFE II: Accident safety analysis code for MFE reactor designs

NASA Astrophysics Data System (ADS)

Sevigny, Lawrence Michael

The viability of controlled thermonuclear fusion as an alternative energy source hinges on its desirability from an economic and an environmental and safety standpoint. It is the latter which is the focus of this thesis. For magnetic fusion energy (MFE) devices, the safety concerns equate to a design's behavior during a worst-case accident scenario which is the loss of coolant accident (LOCA). In this dissertation, we examine the behavior of MFE devices during a LOCA and how this behavior relates to the safety characteristics of the machine; in particular the acute, whole-body, early dose. In doing so, we have produced an accident safety code, BESAFE II, now available to the fusion reactor design community. The Appendix constitutes the User's Manual for BESAFE II. The theory behind early dose calculations including the mobilization of activation products is presented in Chapter 2. Since mobilization of activation products is a strong function of temperature, it becomes necessary to calculate the thermal response of a design during a LOCA in order to determine the fraction of the activation products which are mobilized and thus become the source for the dose. The code BESAFE II is designed to determine the temperature history of each region of a design and determine the resulting mobilization of activation products at each point in time during the LOCA. The BESAFE II methodology is discussed in Chapter 4, followed by demonstrations of its use for two reference design cases: a PCA-Li tokamak and a SiC-He tokamak. Of these two cases, it is shown that the SiC-He tokamak is a better design from an accident safety standpoint than the PCA-Li tokamak. It is also found that doses derived from temperature-dependent mobilization data are different than those predicted using set mobilization categories such as those that involve Piet fractions. This demonstrates the need for more experimental data on fusion materials. The possibility for future improvements and modifications to BESAFE II is discussed in Chapter 6, for example, by adding additional environmental indices such as a waste disposal index. The biggest improvement to BESAFE II would be an increase in the database of activation product mobilization for a larger spectrum of fusion reactor materials. The ultimate goal we have is for BESAFE II to become part of a systems design program which would include economic factors and allow both safety and the cost of electricity to influence design.

Electronic structure robustness and design rules for 2D colloidal heterostructures

NASA Astrophysics Data System (ADS)

Chu, Audrey; Livache, Clément; Ithurria, Sandrine; Lhuillier, Emmanuel

2018-01-01

Among the colloidal quantum dots, 2D nanoplatelets present exceptionally narrow optical features. Rationalizing the design of heterostructures of these objects is of utmost interest; however, very little work has been focused on the investigation of their electronic properties. This work is organized into two main parts. In the first part, we use 1D solving of the Schrödinger equation to extract the effective masses for nanoplatelets (NPLs) of CdSe, CdS, and CdTe and the valence band offset for NPL core/shell of CdSe/CdS. In the second part, using the determined parameters, we quantize how the spectra of the CdSe/CdS heterostructure get affected by (i) the application of an electric field and (ii) by the presence of a dull interface. We also propose design strategies to make the heterostructure even more robust.

OBJECTIVES, DESIGN, AND PRELIMINARY RESULTS FROM THE ATLANTA SUPERSITE PROJECT

EPA Science Inventory

The Atlanta Supersites project is the first of two Supersites projects to be established during Phase I of EPA's Supersites Program; Phase II is being established through a Request for Assistance. The other initial project is in Fresno, California. The Supersite Program is part o...

Parental Perceptions of Neighborhood Effects in Latino Comunas

PubMed Central

Horner, Pilar; Sanchez, Ninive; Castillo, Marcela; Delva, Jorge

2011-01-01

Objectives To obtain rich information about how adult Latinos living in high-poverty/high-drug use neighborhoods perceive and negotiate their environment. Methods In 2008, thirteen adult caregivers in Santiago, Chile were interviewed with open-ended questions to ascertain beliefs about neighborhood effects and drug use. Analysis Inductive analysis was used to develop the codebook/identify trends. Discussion Residents externalized their understanding of drug use and misuse by invoking the concept of delinquent youth. A typology of their perceptions is offered. Learning more about residents’ circumstances may help focus on needs-based interventions. More research with Latino neighborhoods is needed for culturally-competent models of interventions. PMID:22497879

Efficient storage and management of radiographic images using a novel wavelet-based multiscale vector quantizer

NASA Astrophysics Data System (ADS)

Yang, Shuyu; Mitra, Sunanda

2002-05-01

Due to the huge volumes of radiographic images to be managed in hospitals, efficient compression techniques yielding no perceptual loss in the reconstructed images are becoming a requirement in the storage and management of such datasets. A wavelet-based multi-scale vector quantization scheme that generates a global codebook for efficient storage and transmission of medical images is presented in this paper. The results obtained show that even at low bit rates one is able to obtain reconstructed images with perceptual quality higher than that of the state-of-the-art scalar quantization method, the set partitioning in hierarchical trees.

Multi-sensor physical activity recognition in free-living.

PubMed

Ellis, Katherine; Godbole, Suneeta; Kerr, Jacqueline; Lanckriet, Gert

Physical activity monitoring in free-living populations has many applications for public health research, weight-loss interventions, context-aware recommendation systems and assistive technologies. We present a system for physical activity recognition that is learned from a free-living dataset of 40 women who wore multiple sensors for seven days. The multi-level classification system first learns low-level codebook representations for each sensor and uses a random forest classifier to produce minute-level probabilities for each activity class. Then a higher-level HMM layer learns patterns of transitions and durations of activities over time to smooth the minute-level predictions. [Formula: see text].

Video data compression using artificial neural network differential vector quantization

NASA Technical Reports Server (NTRS)

Krishnamurthy, Ashok K.; Bibyk, Steven B.; Ahalt, Stanley C.

1991-01-01

An artificial neural network vector quantizer is developed for use in data compression applications such as Digital Video. Differential Vector Quantization is used to preserve edge features, and a new adaptive algorithm, known as Frequency-Sensitive Competitive Learning, is used to develop the vector quantizer codebook. To develop real time performance, a custom Very Large Scale Integration Application Specific Integrated Circuit (VLSI ASIC) is being developed to realize the associative memory functions needed in the vector quantization algorithm. By using vector quantization, the need for Huffman coding can be eliminated, resulting in superior performance against channel bit errors than methods that use variable length codes.

No-Oven, No-Autoclave Composite Processing

NASA Technical Reports Server (NTRS)

Rauscher, Michael D.

2015-01-01

Very large composite structures, such as those used in NASA's Space Launch System, push the boundaries imposed by current autoclaves. New technology is needed to maintain composite performance and free manufacturing engineers from the restraints of curing equipment size limitations. Recent efforts on a Phase II project by Cornerstone Research Group, Inc. (CRG), have advanced the technology and manufacturing readiness levels of a unique two-part epoxy resin system. Designed for room-temperature infusion of a dry carbon preform, the system includes a no-heat-added cure that delivers 350 F composite performance in a matter of hours. This no-oven, no-autoclave (NONA) composite processing eliminates part-size constraints imposed by infrastructure and lowers costs by increasing throughput and reducing capital-specific, process-flow bottlenecks. As a result of the Phase II activity, NONA materials and processes were used to make high-temperature composite tooling suitable for further production of carbon-epoxy laminates and honeycomb/ sandwich-structure composites with an aluminum core. The technology platform involves tooling design, resin infusion processing, composite part design, and resin chemistry. The various technology elements are combined to achieve a fully cured part. The individual elements are not unusual, but they are combined in such a way that enables proper management of the heat generated by the epoxy resin during cure. The result is a self-cured carbon/ epoxy composite part that is mechanically and chemically stable at temperatures up to 350 F. As a result of the successful SBIR effort, CRG has launched NONA Composites as a spinoff subsidiary. The company sells resin to end users, fabricates finished goods for customers, and sells composite tooling made with NONA materials and processes to composite manufacturers.

User-Centered Design of the eyeGuide, a Tailored Glaucoma Behavior Change Program

PubMed Central

Killeen, Olivia; MacKenzie, Chamisa; Heisler, Michele; Resnicow, Ken; Lee, Paul P.; Newman-Casey, Paula Anne

2016-01-01

PURPOSE We employed user-centered design to refine a prototype of the eyeGuide, a novel, tailored behavior change program intended to improve medication adherence among glaucoma patients. PATIENTS Glaucoma patients ≥ age 40 prescribed ≥1 glaucoma medication were included. METHODS The eyeGuide consists of tailored educational content and tailored testimonials in which patients share how they were able to overcome barriers to improve their medication adherence. A hybrid of semi-structured diagnostic and pre-testing interviews were used to refine the content of the eyeGuide. Purposeful sampling was used to recruit a study population representative of the glaucoma patient population. Interviews were conducted until thematic saturation was reached. Interviews were audio recorded and transcribed verbatim. Three researchers analyzed the transcripts, generated a codebook and identified key themes using NVivo 10.0 to further refine the eyeGuide. RESULTS Twenty-one glaucoma patients were interviewed; mean age 72 ± 12.4 years, five (24%) African-Americans, nine (43%) with poor self-reported adherence, ten (47.6%) ≥ age 75, ten (47.6%) with poor vision and nine (42.9%) women. Qualitative analysis identified five important themes for improving glaucoma self-management: social support, patient-provider relationship, medication routine, patients’ beliefs about disease and treatment, and eye drop instillation. All participants expressed satisfaction with in-person delivery of the eyeGuide and preferred this to a web-based module. Participant feedback resulted in revised content. CONCLUSIONS User-centered design generated improvements in the eyeGuide that would not have been possible without patient input. Participants expressed satisfaction with the tailored content. PMID:27096721

User-centered Design of the eyeGuide: A Tailored Glaucoma Behavior Change Program.

PubMed

Killeen, Olivia J; MacKenzie, Chamisa; Heisler, Michele; Resnicow, Ken; Lee, Paul P; Newman-Casey, Paula Anne

2016-10-01

We employed user-centered design to refine a prototype of the eyeGuide, a novel, tailored behavior change program intended to improve medication adherence among glaucoma patients. Glaucoma patients age 40 years and above prescribed ≥1 glaucoma medication were included. The eyeGuide consists of tailored educational content and tailored testimonials in which patients share how they were able to overcome barriers to improve their medication adherence. A hybrid of semistructured diagnostic and pretesting interviews were used to refine the content of the eyeGuide. Purposeful sampling was used to recruit a study population representative of the glaucoma patient population. Interviews were conducted until thematic saturation was reached. Interviews were audiorecorded and transcribed verbatim. Three researchers analyzed the transcripts, generated a codebook, and identified key themes using NVivo 10.0 to further refine the eyeGuide. Twenty-one glaucoma patients were interviewed; mean age 72±12.4 years, 5 (24%) African Americans, 9 (43%) with poor self-reported adherence, 10 (47.6%) age 75 years and above, 10 (47.6%) with poor vision, and 9 (42.9%) women. Qualitative analysis identified 5 important themes for improving glaucoma self-management: social support, patient-provider relationship, medication routine, patients' beliefs about disease and treatment, and eye drop instillation. All participants expressed satisfaction with in-person delivery of the eyeGuide and preferred this to a Web-based module. Participant feedback resulted in revised content. User-centered design generated improvements in the eyeGuide that would not have been possible without patient input. Participants expressed satisfaction with the tailored content.

A new method for designing dual foil electron beam forming systems. II. Feasibility of practical implementation of the method

NASA Astrophysics Data System (ADS)

Adrich, Przemysław

2016-05-01

In Part I of this work a new method for designing dual foil electron beam forming systems was introduced. In this method, an optimal configuration of the dual foil system is found by means of a systematic, automatized scan of system performance in function of its parameters. At each point of the scan, Monte Carlo method is used to calculate the off-axis dose profile in water taking into account detailed and complete geometry of the system. The new method, while being computationally intensive, minimizes the involvement of the designer. In this Part II paper, feasibility of practical implementation of the new method is demonstrated. For this, a prototype software tools were developed and applied to solve a real life design problem. It is demonstrated that system optimization can be completed within few hours time using rather moderate computing resources. It is also demonstrated that, perhaps for the first time, the designer can gain deep insight into system behavior, such that the construction can be simultaneously optimized in respect to a number of functional characteristics besides the flatness of the off-axis dose profile. In the presented example, the system is optimized in respect to both, flatness of the off-axis dose profile and the beam transmission. A number of practical issues related to application of the new method as well as its possible extensions are discussed.

Experimental Demonstration of Frequency Regulation by Commercial Buildings – Part II: Results and Performance Evaluation

DOE PAGES

Vrettos, Evangelos; Kara, Emre Can; MacDonald, Jason; ...

2016-11-15

This paper is the second part of a two-part series presenting the results from an experimental demonstration of frequency regulation in a commercial building test facility. We developed relevant building models and designed a hierarchical controller for reserve scheduling, building climate control and frequency regulation in Part I. In Part II, we introduce the communication architecture and experiment settings, and present extensive experimental results under frequency regulation. More specifically, we compute the day-ahead reserve capacity of the test facility under different assumptions and conditions. Furthermore, we demonstrate the ability of model predictive control to satisfy comfort constraints under frequency regulation,more » and show that fan speed control can track the fast-moving RegD signal of the Pennsylvania, Jersey, and Maryland Power Market (PJM) very accurately. In addition, we discuss potential effects of frequency regulation on building operation (e.g., increase in energy consumption, oscillations in supply air temperature, and effect on chiller cycling), and provide suggestions for real-world implementation projects. Our results show that hierarchical control is appropriate for frequency regulation from commercial buildings.« less

40 CFR 92.705 - Remedial plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Recall Regulations § 92.705 Remedial plan. (a) When any... adequate supply of parts will be available to initiate the repair campaign, the percentage of the total... intact. (3) The label shall contain: (i) The recall campaign number; and (ii) A code designating the...

40 CFR 85.1803 - Remedial Plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... POLLUTION FROM MOBILE SOURCES Recall Regulations § 85.1803 Remedial Plan. (a) When any manufacturer is... the total parts requirement of each person who is to perform the repair under the remedial plan to be...: (i) The recall campaign number; and (ii) A code designating the campaign facility at which the repair...

32 CFR Appendix E to Part 651 - Content of the Environmental Impact Statement

Code of Federal Regulations, 2012 CFR

2012-07-01

... environmental objectives. This section is designed specifically to call attention to the benefits of the... environmental impacts of the alternatives should be presented in comparative form, thus sharply defining the... alternative. (ii) A comparative presentation of the environmental consequences of all reasonable alternative...

32 CFR Appendix E to Part 651 - Content of the Environmental Impact Statement

Code of Federal Regulations, 2010 CFR

2010-07-01

... environmental objectives. This section is designed specifically to call attention to the benefits of the... environmental impacts of the alternatives should be presented in comparative form, thus sharply defining the... alternative. (ii) A comparative presentation of the environmental consequences of all reasonable alternative...

32 CFR Appendix E to Part 651 - Content of the Environmental Impact Statement

Code of Federal Regulations, 2011 CFR

2011-07-01

... environmental objectives. This section is designed specifically to call attention to the benefits of the... environmental impacts of the alternatives should be presented in comparative form, thus sharply defining the... alternative. (ii) A comparative presentation of the environmental consequences of all reasonable alternative...

32 CFR Appendix E to Part 651 - Content of the Environmental Impact Statement

Code of Federal Regulations, 2014 CFR

2014-07-01

... environmental objectives. This section is designed specifically to call attention to the benefits of the... environmental impacts of the alternatives should be presented in comparative form, thus sharply defining the... alternative. (ii) A comparative presentation of the environmental consequences of all reasonable alternative...

32 CFR Appendix E to Part 651 - Content of the Environmental Impact Statement

Code of Federal Regulations, 2013 CFR

2013-07-01

... environmental objectives. This section is designed specifically to call attention to the benefits of the... environmental impacts of the alternatives should be presented in comparative form, thus sharply defining the... alternative. (ii) A comparative presentation of the environmental consequences of all reasonable alternative...

Impaired anterior swim bladder inflation following exposure to the thyroid peroxidase inhibitor 2-mercaptobenzothiazole - Part II: zebrafish

EPA Science Inventory

Disruption of the thyroid hormone (TH) system is increasingly being recognized as an important mode of action that can lead to ecologically relevant adverse outcomes, especially during embryonic development. The present study was designed to further characterize the effects of di...

Gaming and Gamification Part II

ERIC Educational Resources Information Center

Mallon, Melissa

2013-01-01

Just as academic gaming in general cannot be limited to any one topic or genre, the "Public Services Quarterly" Internet Resources column is not limited to a single entry on gaming and gamification in libraries. Public services librarians interested in designing their own games have many successful examples to draw from. The previous…

78 FR 14793 - Advancing Interoperability and Health Information Exchange

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-07

...: Designing Data Stewardship Entities and Advancing Data Access,'' Health Services Research 2010 45:5, Part II... business information that could be considered to be proprietary. We will post all comments received before... office-based physicians as well as hospitals. 5 6 For example, physician adoption of five core Meaningful...

Investigating the Marine Environment and Its Resources, Part II.

ERIC Educational Resources Information Center

Lien, Violetta F.

This is the second of two volumes comprising a resource unit designed to help students become more knowledgeable about the marine environment and its resources. Included in this volume are discussions of changes in the human and marine environment, human needs, marine resources, living marine resources, marine transportation, marine energy…

Office Safety (Part II).

ERIC Educational Resources Information Center

Swartz, Carl

Toxic chemicals, noise, inadequate lighting, poor equipment design, smoking, and accidents pose serious health hazards for millions of office workers. Stress and boredom also contribute to the problems of safety. Workers should be on guard in the office for hazards, many of which are recognizable through common sense and patience. Workers must…

Schools Are for All Kids. Part II: School Site Implementation. Trainer's Packet.

ERIC Educational Resources Information Center

Roger, Blair; And Others

This trainer's packet, designed to be used in conjunction with the participant's manual, was prepared for a 2-day workshop to restructure schools to embrace all children, including those with disabilities. The trainer's materials include: program objectives; masters for overhead transparencies; and descriptions of learning activities, including…

Accounting Issues: An Essay Series. Part II--Accounts Receivable

ERIC Educational Resources Information Center

Laux, Judith A.

2007-01-01

This is the second in a series of articles designed to help academics refocus the introductory accounting course on the theoretical underpinnings of accounting. Intended as a supplement for the principles course, this article connects the asset Accounts Receivable to the essential theoretical constructs, discusses the inherent tradeoffs and…

49 CFR Appendix C to Part 564 - Information Applicable to Standardized Sealed Beam Headlamp Units

Code of Federal Regulations, 2013 CFR

2013-10-01

... Standardized Sealed Beam Unit. A. Dimensions marked “I”, indicating interchangeability, for which conformance is mandatory. B. All other dimensions which are for design purposes. II. Dimensional Information... Sealed Beam Unit A. Dimensions marked “I”, indicating interchangeability, for which conformance is...

76 FR 3859 - Trade Acknowledgment and Verification of Security-Based Swap Transactions

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-21

... establish, maintain, and enforce policies and procedures that are reasonably designed to obtain prompt...; have the capacity to enforce their rules and discipline their participants; and have chief compliance...). Moreover, as discussed in Part II.E below, an SBS Entity must establish, maintain, and enforce policies and...

31 CFR 560.538 - Authorized transactions necessary and ordinarily incident to publishing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... written publication in electronic format, the addition of embedded software necessary for reading, browsing, navigating, or searching the written publication; and (ii) Exporting embedded software necessary... that the software is designated as “EAR99” under the Export Administration Regulations, 15 CFR parts...

31 CFR 560.538 - Authorized transactions necessary and ordinarily incident to publishing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... written publication in electronic format, the addition of embedded software necessary for reading, browsing, navigating, or searching the written publication; and (ii) Exporting embedded software necessary... that the software is designated as “EAR99” under the Export Administration Regulations, 15 CFR parts...

28 CFR 37.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... eight agencies designated under § 35.190 of 28 CFR part 35 (the Department's title II regulation) to... jurisdiction under section 504 and with the EEOC, which has jurisdiction under title I; and (3) Alleges the... weight a section 504 agency or the EEOC shall give to the other agency's findings and conclusions, such...

28 CFR 37.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... eight agencies designated under § 35.190 of 28 CFR part 35 (the Department's title II regulation) to... jurisdiction under section 504 and with the EEOC, which has jurisdiction under title I; and (3) Alleges the... weight a section 504 agency or the EEOC shall give to the other agency's findings and conclusions, such...

28 CFR 37.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... eight agencies designated under § 35.190 of 28 CFR part 35 (the Department's title II regulation) to... jurisdiction under section 504 and with the EEOC, which has jurisdiction under title I; and (3) Alleges the... weight a section 504 agency or the EEOC shall give to the other agency's findings and conclusions, such...

THE OHIO RIVER BASIN ENERGY FACILITY SITING MODEL. VOLUME II: SITES AND ON-LINE DATES

EPA Science Inventory

The report was prepared as part of the Ohio River Basin Energy Study (ORBES), a multidisciplinary policy research program. The siting model developed for ORBES is specifically designed for regional policy analysis. The region includes 423 counties in an area that consists of all ...

Optimal platform design using non-dominated sorting genetic algorithm II and technique for order of preference by similarity to ideal solution; application to automotive suspension system

NASA Astrophysics Data System (ADS)

Shojaeefard, Mohammad Hassan; Khalkhali, Abolfazl; Faghihian, Hamed; Dahmardeh, Masoud

2018-03-01

Unlike conventional approaches where optimization is performed on a unique component of a specific product, optimum design of a set of components for employing in a product family can cause significant reduction in costs. Increasing commonality and performance of the product platform simultaneously is a multi-objective optimization problem (MOP). Several optimization methods are reported to solve these MOPs. However, what is less discussed is how to find the trade-off points among the obtained non-dominated optimum points. This article investigates the optimal design of a product family using non-dominated sorting genetic algorithm II (NSGA-II) and proposes the employment of technique for order of preference by similarity to ideal solution (TOPSIS) method to find the trade-off points among the obtained non-dominated results while compromising all objective functions together. A case study for a family of suspension systems is presented, considering performance and commonality. The results indicate the effectiveness of the proposed method to obtain the trade-off points with the best possible performance while maximizing the common parts.

Transcutaneous electrical nerve stimulation reduces exercise-induced perceived pain and improves endurance exercise performance.

PubMed

Astokorki, Ali H Y; Mauger, Alexis R

2017-03-01

Muscle pain is a natural consequence of intense and prolonged exercise and has been suggested to be a limiter of performance. Transcutaneous electrical nerve stimulation (TENS) and interferential current (IFC) have been shown to reduce both chronic and acute pain in a variety of conditions. This study sought to ascertain whether TENS and IFC could reduce exercise-induced pain (EIP) and whether this would affect exercise performance. It was hypothesised that TENS and IFC would reduce EIP and result in an improved exercise performance. In two parts, 18 (Part I) and 22 (Part II) healthy male and female participants completed an isometric contraction of the dominant bicep until exhaustion (Part I) and a 16.1 km cycling time trial as quickly as they could (Part II) whilst receiving TENS, IFC, and a SHAM placebo in a repeated measures, randomised cross-over, and placebo-controlled design. Perceived EIP was recorded in both tasks using a validated subjective scale. In Part I, TENS significantly reduced perceived EIP (mean reduction of 12%) during the isometric contraction (P = 0.006) and significantly improved participants' time to exhaustion by a mean of 38% (P = 0.02). In Part II, TENS significantly improved (P = 0.003) participants' time trial completion time (~2% improvement) through an increased mean power output. These findings demonstrate that TENS can attenuate perceived EIP in a healthy population and that doing so significantly improves endurance performance in both submaximal isometric single limb exercise and whole-body dynamic exercise.

Performance of 15-Stage Experimental J71 Axial-Flow Compressor: II - Individual Stage Performance Characteristics

NASA Technical Reports Server (NTRS)

Lucas, James G.; Filippi, Richard E.

1954-01-01

The first four stages were found to cause a major part of the poor low-speed efficiency of this compressor. The low design-speed over-all pressure ratio at surge was caused by the first and the twelfth to fifteenth stages. The multiple over-all performance curves in the intermediate-speed range were at least partly the result of double-branched characteristic curves for the third and seventh stages.

Automated procedure for developing hybrid computer simulations of turbofan engines. Part 1: General description

NASA Technical Reports Server (NTRS)

Szuch, J. R.; Krosel, S. M.; Bruton, W. M.

1982-01-01

A systematic, computer-aided, self-documenting methodology for developing hybrid computer simulations of turbofan engines is presented. The methodology that is pesented makes use of a host program that can run on a large digital computer and a machine-dependent target (hybrid) program. The host program performs all the calculations and data manipulations that are needed to transform user-supplied engine design information to a form suitable for the hybrid computer. The host program also trims the self-contained engine model to match specified design-point information. Part I contains a general discussion of the methodology, describes a test case, and presents comparisons between hybrid simulation and specified engine performance data. Part II, a companion document, contains documentation, in the form of computer printouts, for the test case.

CMIF ECLS system test findings

NASA Technical Reports Server (NTRS)

Schunk, Richard G.; Carrasquillo, Robyn L.; Ogle, Kathyrn Y.; Wieland, Paul O.; Bagdigian, Robert M.

1989-01-01

During 1987 three Space Station integrated Environmental Control and Life Support System (ECLSS) tests were conducted at the Marshall Space Flight Center (MSFC) Core Module Integration Facility (CMIF) as part of the MSFC ECLSS Phase II test program. The three tests ranged in duration from 50 to 150 hours and were conducted inside of the CMIF module simulator. The Phase II partial integrated system test configuration consisted of four regenerative air revitalization subsystems and one regenerative water reclamation subsystem. This paper contains a discussion of results and lessons learned from the Phase II test program. The design of the Phase II test configuration and improvements made throughout the program are detailed. Future plans for the MSFC CMIF test program are provided, including an overview of planned improvements for the Phase III program.

40 CFR 52.2465 - Original identification of plan section.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., 2FSD, and pre-dryer 3FSD from Part IV, Rule EX-4, Section 4.41(i) until December 15, 1981, submitted on...) Appendix K (7) Appendix N (8) Appendix P (9) Appendix R I., II.B., II.D., II.E., II.F., II.G., II.H., II.I...) Amendments to Part I, Subpart 1.01 (Certain Terms Defined) and to Part IV, Section 4.52 (former Section 4.705...

Santa Ana River Design Memorandum Number 1. Phase 2. GDM on the Santa Ana River Mainstem, Including Santiago Creek. Volume 6. Santiago Creek

DTIC Science & Technology

1988-08-01

requirements of ASTM C 150. 8-10 The Kaiser Cement Company plant in the Lucerne Valley , located approximately 100 miles from the project, produces Type II...land classification of the greater Los Angeles area; Part III Classification of sand and gravel resource areas, Orange County-Temescal Valley Production...Memorandum No. i 4. TITLE (eod Subtitle) 5. TYPE OF REPORT a P ERIOD COVERED Phase II GDM on the Santa Ana River MainstemIncluding Santiago Creek Final

The SHEFEX II Thermal Protection System

NASA Astrophysics Data System (ADS)

Bohrk, H.; Elsaber, H.; Weihs, H.

2011-05-01

The SHEFEXII payload tip is ready for flight. Within a period of three years, the experiment has been designed, laid out, parts have been manufactured, mounted and instrumented for the upcoming flight in autumn 2011. The present paper gives an overview over the thermal protection system (TPS) of the SHEFEX II vehicle including the TPS-material, the overall TPS-setup, and detailed informations on the faceted ther- mal protection including the gap seal, the sharp leading edge, the transpiration-cooling experiment AKTIV, and the aerodynamic control surfaces, i.e. canards.

19 CFR Annex II to Part 351 - Deadlines for Parties in Countervailing Administrative Reviews

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Deadlines for Parties in Countervailing Administrative Reviews II Annex II to Part 351 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Pt. 351, Annex II Annex II to Part 351—Deadlines for Parties...

19 CFR Annex II to Part 351 - Deadlines for Parties in Countervailing Administrative Reviews

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Deadlines for Parties in Countervailing Administrative Reviews II Annex II to Part 351 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Pt. 351, Annex II Annex II to Part 351—Deadlines for Parties...

19 CFR Annex II to Part 351 - Deadlines for Parties in Countervailing Administrative Reviews

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Deadlines for Parties in Countervailing Administrative Reviews II Annex II to Part 351 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Pt. 351, Annex II Annex II to Part 351—Deadlines for Parties...

19 CFR Annex II to Part 351 - Deadlines for Parties in Countervailing Administrative Reviews

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Deadlines for Parties in Countervailing Administrative Reviews II Annex II to Part 351 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Pt. 351, Annex II Annex II to Part 351—Deadlines for Parties...

19 CFR Annex II to Part 351 - Deadlines for Parties in Countervailing Administrative Reviews

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Deadlines for Parties in Countervailing Administrative Reviews II Annex II to Part 351 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Pt. 351, Annex II Annex II to Part 351—Deadlines for Parties...

10 CFR Appendix II to Part 504 - Fuel Price Computation

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part 504—Fuel Price Computation (a) Introduction. This appendix provides the equations and parameters...

40 CFR Appendix II to Part 1048 - Large Spark-ignition (SI) Composite Transient Cycle

Code of Federal Regulations, 2010 CFR

2010-07-01

... Transient Cycle II Appendix II to Part 1048 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY.... 1048, App. II Appendix II to Part 1048—Large Spark-ignition (SI) Composite Transient Cycle The following table shows the transient duty-cycle for engines that are not constant-speed engines, as described...

40 CFR Appendix II to Part 261 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false [Reserved] II Appendix II to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION AND LISTING OF HAZARDOUS WASTE Appendix II to Part 261 [Reserved] ...

Exploring the bases for a mixed reality stroke rehabilitation system, Part I: A unified approach for representing action, quantitative evaluation, and interactive feedback

PubMed Central

2011-01-01

Background Although principles based in motor learning, rehabilitation, and human-computer interfaces can guide the design of effective interactive systems for rehabilitation, a unified approach that connects these key principles into an integrated design, and can form a methodology that can be generalized to interactive stroke rehabilitation, is presently unavailable. Results This paper integrates phenomenological approaches to interaction and embodied knowledge with rehabilitation practices and theories to achieve the basis for a methodology that can support effective adaptive, interactive rehabilitation. Our resulting methodology provides guidelines for the development of an action representation, quantification of action, and the design of interactive feedback. As Part I of a two-part series, this paper presents key principles of the unified approach. Part II then describes the application of this approach within the implementation of the Adaptive Mixed Reality Rehabilitation (AMRR) system for stroke rehabilitation. Conclusions The accompanying principles for composing novel mixed reality environments for stroke rehabilitation can advance the design and implementation of effective mixed reality systems for the clinical setting, and ultimately be adapted for home-based application. They furthermore can be applied to other rehabilitation needs beyond stroke. PMID:21875441

Obstacle Detection Algorithms for Aircraft Navigation: Performance Characterization of Obstacle Detection Algorithms for Aircraft Navigation

NASA Technical Reports Server (NTRS)

Kasturi, Rangachar; Camps, Octavia; Coraor, Lee

2000-01-01

The research reported here is a part of NASA's Synthetic Vision System (SVS) project for the development of a High Speed Civil Transport Aircraft (HSCT). One of the components of the SVS is a module for detection of potential obstacles in the aircraft's flight path by analyzing the images captured by an on-board camera in real-time. Design of such a module includes the selection and characterization of robust, reliable, and fast techniques and their implementation for execution in real-time. This report describes the results of our research in realizing such a design. It is organized into three parts. Part I. Data modeling and camera characterization; Part II. Algorithms for detecting airborne obstacles; and Part III. Real time implementation of obstacle detection algorithms on the Datacube MaxPCI architecture. A list of publications resulting from this grant as well as a list of relevant publications resulting from prior NASA grants on this topic are presented.

42 CFR 417.802 - Allowable costs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... procedures under which the members of the group accept effective incentives, such as risk-sharing, designed... physicians and other suppliers in the same or a similar locality. (ii)(A) If a physician group to whom the... group may not exceed the reasonable charges for those services, as defined in subpart E of part 405 of...

24 CFR 3285.405 - Severe wind zones.

Code of Federal Regulations, 2010 CFR

2010-04-01

... DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Anchorage Against Wind § 3285.405 Severe wind zones. When any part of a home is installed within 1,500 feet of a coastline in Wind Zones II or III, the manufactured home must be designed for the increased requirements, as specified on the home's data plate (refer...

Design and Fabrication of FRP Truck Trailer Side Racks.

DTIC Science & Technology

1983-08-01

0.100 in. All contact surfaces in the mold were sealed with white shellac and finished with five coats of carnauba wax . The completed mold is shown in...Figure 10. 15 II Figure 10. FRP prototype mold. FRP molding procedures were duplicated for each part produced. In general, the waxed mold was coated

The Rural Elderly: Program Planning Guidelines.

ERIC Educational Resources Information Center

Coward, Raymond T.; Kerckhoff, Richard K.

Designed for the rural practitioner, this manual offers a description of the major developmental tasks faced by individuals during the latter part of the life span and a summary of the major implications that research holds for building community programs for the rural elderly. Section II discusses two major assumptions: (1) because human beings…

SEL/Project Language. Level II, Kindergarten, Teacher's Handbook.

ERIC Educational Resources Information Center

Valladares, Ann E.; Lynch, Helen C.

The Teacher's Handbook is part of the publication series of the Southeastern Education Laboratory/Project Language (SEL/PL), an 8-year language-centered program designed to alleviate the language deficiencies of disadvantaged children between the ages of four and eleven. For teachers utilizing SEL/PL, the Handbook provides a research summary and…

Military Curricula for Vocational & Technical Education. Painting I, II. 3-6.

ERIC Educational Resources Information Center

Army Engineer School, Fort Belvoir, VA.

These two student workbooks with texts for a secondary-postsecondary level course in painting comprise one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. The two-part self-study course is designed to provide the student with basic information…

40 CFR 63.100 - Applicability and designation of source.

Code of Federal Regulations, 2014 CFR

2014-07-01

... National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical..., and H of this part apply to chemical manufacturing process units that meet all the criteria specified... more of the chemicals listed in paragraphs (b)(1)(i) or (b)(1)(ii) of this section. (i) One or more of...

40 CFR 63.100 - Applicability and designation of source.

Code of Federal Regulations, 2012 CFR

2012-07-01

... National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical..., and H of this part apply to chemical manufacturing process units that meet all the criteria specified... more of the chemicals listed in paragraphs (b)(1)(i) or (b)(1)(ii) of this section. (i) One or more of...

40 CFR 63.100 - Applicability and designation of source.

Code of Federal Regulations, 2013 CFR

2013-07-01

... National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical..., and H of this part apply to chemical manufacturing process units that meet all the criteria specified... more of the chemicals listed in paragraphs (b)(1)(i) or (b)(1)(ii) of this section. (i) One or more of...

40 CFR 63.100 - Applicability and designation of source.

Code of Federal Regulations, 2011 CFR

2011-07-01

... National Emission Standards for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical..., and H of this part apply to chemical manufacturing process units that meet all the criteria specified... more of the chemicals listed in paragraphs (b)(1)(i) or (b)(1)(ii) of this section. (i) One or more of...

High skew link slab bridge system with deck sliding over backwall or backwall sliding over abutments : part II.

DOT National Transportation Integrated Search

2011-09-30

A new bridge design and construction trend to help improve durability and rideability is to remove expansion joints over piers and abutments. One approach to achieve this is to make the deck continuous over the piers by means of a link slab while the...

California's Past Programs to Support School and District Improvement: A Synthesis of Evaluation Studies

ERIC Educational Resources Information Center

California Collaborative on District Reform, 2017

2017-01-01

This document synthesizes the findings from the evaluations of four statewide programs designed to provide support for underperforming schools and districts in California as part of the state accountability system: (1) Immediate Intervention/Underperforming Schools Program (II/USP); (2) High Priority Schools Grant (HPSG) Program; (3) School…

Investment Strategies for Improving Fifth-Generation Fighter Training

DTIC Science & Technology

2011-01-01

The pod is part of the fifth-generation P5 Combat Training System/Tactical Combat Training System designed by Cubic Corporation. (See Shamim , 2007...http://www.rand.org/pubs/monograph_reports/MR1286/ Shamim , Asif, “F-35 Lightning II News: Cubic Lands Contract for F-35 ACMI Training System,” F-16.net

The Healthy Learner Model for Student Chronic Condition Management--Part II: The Asthma Initiative

ERIC Educational Resources Information Center

Erickson, Cecelia DuPlessis; Splett, Patricia L.; Mullett, Sara Stoltzfus; Jensen, Charlotte; Belseth, Stephanie Bisson

2006-01-01

The Healthy Learner Asthma Initiative (HLAI) was designed as a comprehensive, school-community initiative to improve asthma management and produce healthy learners. National asthma guidelines were translated into components of asthma management in the school setting that defined performance expectations and lead to greater quality and consistency…

Anaerobic Digestion II. Sludge Treatment and Disposal Course #166. Instructor's Guide [and] Student Workbook.

ERIC Educational Resources Information Center

Arasmith, E. E.

This lesson is the second of a two-part series on anaerobic digestion. Topics discussed include classification of digester by function, roof design, and temperature range, mixing systems, gas system components, operational control basics, and general safety considerations. The lesson includes an instructor's guide and student workbook. The…

Serbo-Croatian. SC-15A. Part 3. Advanced Grammar and Syntax,

DTIC Science & Technology

1983-09-01

mislili smo, (mi) The second person designates the person whom the speaker is addressing. Sg. govoris, pevas , pises, pevao si (ti) PI. govorite, pevate...one who is addressed. Sg. govori (on or ona), peva , pise, je pevao (la) PI. govore, pevau, pisu, su pevali(le) (one, oni) II. Aspect Predicates: There

AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT XVII, LEARNING ABOUT AC GENERATOR (ALTERNATOR) PRINCIPLES (PART II).

ERIC Educational Resources Information Center

Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATING PRINCIPLES AND THE SERVICING AND TESTING PROCEDURES FOR ALTERNATING CURRENT (AC) GENERATORS AND REGULATORS USED ON DIESEL POWERED EQUIPMENT. TOPICS ARE REVIEW OF ALTERNATOR PRINCIPLES, ALTERNATOR SERVICING AND TESTING, ALTERNATOR REGULATOR OPERATING…

Teaching Both Sides of the Brain: Book II: Reading.

ERIC Educational Resources Information Center

Dombrower, Jule; And Others

Part of a program to increase the academic growth of preschool and primary grade students through the utilization of brain hemisphere research, this volume contains lessons designed to improve basic reading skills. Material is divided into two sections. Section 1 contains 17 activities to develop letter and word recognition. In activities 1-12,…

40 CFR Appendix II to Part 280 - List of Agencies Designated To Receive Notifications

Code of Federal Regulations, 2012 CFR

2012-07-01

... of Pollution Control and Ecology, P.O. Box 9583, Little Rock, Arkansas 72219, 501/562-7444 California (State Form), Executive Director, State Water Resources Control Board, P.O. Box 100, Sacramento... and Waste Management, Department of Natural Resources and Environmental Control, P.O. Box 1401, 89...

40 CFR Appendix II to Part 280 - List of Agencies Designated To Receive Notifications

Code of Federal Regulations, 2013 CFR

2013-07-01

... of Pollution Control and Ecology, P.O. Box 9583, Little Rock, Arkansas 72219, 501/562-7444 California (State Form), Executive Director, State Water Resources Control Board, P.O. Box 100, Sacramento... and Waste Management, Department of Natural Resources and Environmental Control, P.O. Box 1401, 89...

40 CFR Appendix II to Part 280 - List of Agencies Designated To Receive Notifications

Code of Federal Regulations, 2010 CFR

2010-07-01

... of Pollution Control and Ecology, P.O. Box 9583, Little Rock, Arkansas 72219, 501/562-7444 California (State Form), Executive Director, State Water Resources Control Board, P.O. Box 100, Sacramento... and Waste Management, Department of Natural Resources and Environmental Control, P.O. Box 1401, 89...

40 CFR Appendix II to Part 280 - List of Agencies Designated To Receive Notifications

Code of Federal Regulations, 2011 CFR

2011-07-01

... of Pollution Control and Ecology, P.O. Box 9583, Little Rock, Arkansas 72219, 501/562-7444 California (State Form), Executive Director, State Water Resources Control Board, P.O. Box 100, Sacramento... and Waste Management, Department of Natural Resources and Environmental Control, P.O. Box 1401, 89...

40 CFR Appendix II to Part 280 - List of Agencies Designated To Receive Notifications

Code of Federal Regulations, 2014 CFR

2014-07-01

... of Pollution Control and Ecology, P.O. Box 9583, Little Rock, Arkansas 72219, 501/562-7444 California (State Form), Executive Director, State Water Resources Control Board, P.O. Box 100, Sacramento... and Waste Management, Department of Natural Resources and Environmental Control, P.O. Box 1401, 89...

Pacific Horizons. Guide for the Instructor, Part II.

ERIC Educational Resources Information Center

Close Up Foundation, Arlington, VA.

This guide and its accompanying videotape are designed to provide students with an overview of how Japan has become the second richest nation on earth, despite its small size and limited natural resources. Three activities emphasize key issues in the U.S.-Japanese relations, especially issues related to trade. Each activity uses student handouts…

How to succeed in science: a concise guide for young biomedical scientists. Part II: making discoveries

PubMed Central

Yewdell, Jonathan W.

2009-01-01

Making discoveries is the most important part of being a scientist, and also the most fun. Young scientists need to develop the experimental and mental skill sets that enable them to make discoveries, including how to recognize and exploit serendipity when it strikes. Here, I provide practical advice to young scientists on choosing a research topic, designing, performing and interpreting experiments and, last but not least, on maintaining your sanity in the process. PMID:18401347

How to succeed in science: a concise guide for young biomedical scientists. Part II: making discoveries.

PubMed

Yewdell, Jonathan W

2008-06-01

Making discoveries is the most important part of being a scientist, and also the most fun. Young scientists need to develop the experimental and mental skill sets that enable them to make discoveries, including how to recognize and exploit serendipity when it strikes. Here, I provide practical advice to young scientists on choosing a research topic, designing, performing and interpreting experiments and, last but not least, on maintaining your sanity in the process.

On Idiosyncratic Systems. Part I. Idiosyncratic Systems. Part II. On Being Creative with Computer Aided Design.

DTIC Science & Technology

1977-03-31

the machine properly infer his graphical intentions. The graphics are presumed to be a mixture of projective geometry ( the inter- H section of planes ...conditions lecture to the Societe de Psychologie in Paris most conducive ; nor for the psychological explana— (quoted in Ghiselin [17]) Henri Poincare ...information pro- more wit h frustration than accomplishment. His air vided , the individual will attempt to fi;;d a new planes , submar ines and d i v e r t

Magic Mirror, On the Wall-Which Is the Right Study Design of Them All?-Part II.

PubMed

Vetter, Thomas R

2017-07-01

The assessment of a new or existing treatment or other intervention typically answers 1 of 3 central research-related questions: (1) "Can it work?" (efficacy); (2) "Does it work?" (effectiveness); or (3) "Is it worth it?" (efficiency or cost-effectiveness). There are a number of study designs that, on a situational basis, are appropriate to apply in conducting research. These study designs are generally classified as experimental, quasiexperimental, or observational, with observational studies being further divided into descriptive and analytic categories. This second of a 2-part statistical tutorial reviews these 3 salient research questions and describes a subset of the most common types of observational study designs. Attention is focused on the strengths and weaknesses of each study design to assist in choosing which is appropriate for a given study objective and hypothesis as well as the particular study setting and available resources and data. Specific studies and papers are highlighted as examples of a well-chosen, clearly stated, and properly executed study design type.

40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Sample Fuel Economy Calculations II Appendix II to Part 600 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II to Part 600—Sample Fuel Economy Calculations (...

10 CFR Appendix II to Part 504 - Fuel Price Computation

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part... effects of future real price increases for each fuel. The delivered price of an alternate fuel used to...

10 CFR Appendix II to Part 504 - Fuel Price Computation

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part... (APXi). If an alternate fuel other than coal is proposed the source or the derivation of the index must...

10 CFR Appendix II to Part 504 - Fuel Price Computation

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part... effects of future real price increases for each fuel. The delivered price of an alternate fuel used to...

A Bayesian adaptive design for biomarker trials with linked treatments.

PubMed

Wason, James M S; Abraham, Jean E; Baird, Richard D; Gournaris, Ioannis; Vallier, Anne-Laure; Brenton, James D; Earl, Helena M; Mander, Adrian P

2015-09-01

Response to treatments is highly heterogeneous in cancer. Increased availability of biomarkers and targeted treatments has led to the need for trial designs that efficiently test new treatments in biomarker-stratified patient subgroups. We propose a novel Bayesian adaptive randomisation (BAR) design for use in multi-arm phase II trials where biomarkers exist that are potentially predictive of a linked treatment's effect. The design is motivated in part by two phase II trials that are currently in development. The design starts by randomising patients to the control treatment or to experimental treatments that the biomarker profile suggests should be active. At interim analyses, data from treated patients are used to update the allocation probabilities. If the linked treatments are effective, the allocation remains high; if ineffective, the allocation changes over the course of the trial to unlinked treatments that are more effective. Our proposed design has high power to detect treatment effects if the pairings of treatment with biomarker are correct, but also performs well when alternative pairings are true. The design is consistently more powerful than parallel-groups stratified trials. This BAR design is a powerful approach to use when there are pairings of biomarkers with treatments available for testing simultaneously.

Design verification and fabrication of active control systems for the DAST ARW-2 high aspect ratio wing. Part 2: Appendices

NASA Technical Reports Server (NTRS)

Mcgehee, C. R.

1986-01-01

This is Part 2-Appendices of a study conducted under Drones for Aerodynamic and Structural Testing (DAST) Program to accomplish the final design and hardware fabrication for four active control systems compatible with and ready for installation in the NASA Aeroelastic Research Wing No. 2 (ARW-2) and Firebee II drone flight test vehicle. The wing structure was designed so that Active Control Systems (ACS) are required in the normal flight envelope by integrating control system design with aerodynamics and structure technologies. The DAST ARW-2 configuration uses flutter suppression, relaxed static stability, and gust and maneuver load alleviation ACS systems, and an automatic flight control system. Performance goals and criteria were applied to individual systems and the systems collectively to assure that vehicle stability margins, flutter margins, flying qualities, and load reductions were achieved.

An Electromagnetic Sensor for the Autonomous Running of Visually Impaired and Blind Athletes (Part II: The Wearable Device).

PubMed

Pieralisi, Marco; Di Mattia, Valentina; Petrini, Valerio; De Leo, Alfredo; Manfredi, Giovanni; Russo, Paola; Scalise, Lorenzo; Cerri, Graziano

2017-02-16

Currently, the availability of technology developed to increase the autonomy of visually impaired athletes during sports is limited. The research proposed in this paper (Part I and Part II) focuses on the realization of an electromagnetic system that can guide a blind runner along a race track without the need for a sighted guide. In general, the system is composed of a transmitting unit (widely described in Part I) and a receiving unit, whose components and main features are described in this paper. Special attention is paid to the definition of an electromagnetic model able to faithfully represent the physical mechanisms of interaction between the two units, as well as between the receiving magnetic sensor and the body of the user wearing the device. This theoretical approach allows for an estimation of the signals to be detected, and guides the design of a suitable signal processing board. This technology has been realized, patented, and tested with a blind volunteer with successful results and this paper presents interesting suggestions for further improvements.

An Electromagnetic Sensor for the Autonomous Running of Visually Impaired and Blind Athletes (Part II: The Wearable Device)

PubMed Central

Pieralisi, Marco; Di Mattia, Valentina; Petrini, Valerio; De Leo, Alfredo; Manfredi, Giovanni; Russo, Paola; Scalise, Lorenzo; Cerri, Graziano

2017-01-01

Currently, the availability of technology developed to increase the autonomy of visually impaired athletes during sports is limited. The research proposed in this paper (Part I and Part II) focuses on the realization of an electromagnetic system that can guide a blind runner along a race track without the need for a sighted guide. In general, the system is composed of a transmitting unit (widely described in Part I) and a receiving unit, whose components and main features are described in this paper. Special attention is paid to the definition of an electromagnetic model able to faithfully represent the physical mechanisms of interaction between the two units, as well as between the receiving magnetic sensor and the body of the user wearing the device. This theoretical approach allows for an estimation of the signals to be detected, and guides the design of a suitable signal processing board. This technology has been realized, patented, and tested with a blind volunteer with successful results and this paper presents interesting suggestions for further improvements. PMID:28212348

The Army Communications Objectives Measurement System (ACOMS): Codebook for the Message Content Analysis Data File

DTIC Science & Technology

1988-07-01

0.1 400 SELF-DEVELOPMENT 176 4.8 420 DEV SELF-CONFID 15 0.4 430 DEV MATURE PERSN a 0.2 440 DEV POTENTIAL 367 10.0 450 ADVTG OVER COLLG 23 0.6 471 DEV...OVER COLLG 22 0.6 471 DEV DISCIPLINE it 0.3 481 DEVELOP PRIDE 7 0.2 500 MONEY/BENEFITS 116 3.2 600 EDUC/BENEFITS 279 7.6 700 TRAVEL 43 1.2 821 ADVENTURE...OVER COLLG 9 0.2 460 WRK HITRAIN PEOP 1 0.0 471 DEV DISCIPLINE 7 0.2 491 DEVELOP PRIDE 4 0.1 500 MONEY/BENEFITS 40 1.1 600 EDUC/BENEFITS 90 2.5 700

Mobile Visual Search Based on Histogram Matching and Zone Weight Learning

NASA Astrophysics Data System (ADS)

Zhu, Chuang; Tao, Li; Yang, Fan; Lu, Tao; Jia, Huizhu; Xie, Xiaodong

2018-01-01

In this paper, we propose a novel image retrieval algorithm for mobile visual search. At first, a short visual codebook is generated based on the descriptor database to represent the statistical information of the dataset. Then, an accurate local descriptor similarity score is computed by merging the tf-idf weighted histogram matching and the weighting strategy in compact descriptors for visual search (CDVS). At last, both the global descriptor matching score and the local descriptor similarity score are summed up to rerank the retrieval results according to the learned zone weights. The results show that the proposed approach outperforms the state-of-the-art image retrieval method in CDVS.

The 1986 ARI Survey of U.S. Army Recruits: Codebook for Active Army Survey Respondents

DTIC Science & Technology

1987-04-01

VIEWING NBA - REG SEASON GAMES 0562 153S Y067 REG TV VIEWING NBA PLAYOFFS 0563 153T Y068 REG TV VIEWING NEWHART 0564 153U Y069 REG TV VIEWING WHO’S THE...BSKTBL-REG SEASON 0560 Y065 53Q REG TV VIEWING NCAA BSKTBL PLAYOFFS 0561 YO66 53R REG TV VIEWING NBA - REG SEASON GAMES 0562 Y067 53S REG TV VIEWING... NBA PLAYOFFS 0563 YO68 53T REG TV VIEWING NEWHART 0564 Y069 53U REG TV VIEWING WHO’S THE BOSS 0565 Y070 53V REG TV VIEWING THE COSBY SHOW 0566

Parental perceptions of neighborhood effects in Latino Comunas: the script of "the Delinquent" in understanding drug use, violence, and social disorganization.

PubMed

Horner, Pilar; Sanchez, Ninive; Castillo, Marcela; Delva, Jorge

2012-06-01

To obtain rich information about how adult Latinos living in high-poverty/high-drug use neighborhoods perceive and negotiate their environment. In 2008, 13 adult caregivers in Santiago, Chile, were interviewed with open-ended questions to ascertain beliefs about neighborhood effects and drug use. Inductive analysis was used to develop the codebook/identify trends. Residents externalized their understanding of drug use and misuse by invoking the concept of delinquent youth. A typology of their perceptions is offered. Learning more about residents' circumstances may help focus on needs-based interventions. More research with Latino neighborhoods is needed for culturally competent models of interventions.

Use of biodegradable polylactic acid barrier materials in the treatment of grade II periodontal furcation defects in humans--Part I: A multicenter investigative clinical study.

PubMed

Vernino, A R; Ringeisen, T A; Wang, H L; Derhalli, M; Rapley, J; Nechamkin, S J; Brekke, J

1998-12-01

This study evaluated two bioresorbable polylactic acid barriers (Epi-Guide and Guidor) to determine if design differences were of therapeutic significance in the treatment of Grade II furcation defects in humans. Forty patients with bilaterally matched, Grade II furcation defects in maxillary or mandibular first or second molars were treated in a multicenter study. Comprehensive initial periodontal therapy, followed by defect debridement and root preparation, preceded randomized membrane placement. Data collected from all three investigative centers were pooled and analyzed using an analysis of variance appropriate for a counterbalancing design. Both barrier types produced measurable improvements of clinical probing values. Barrier exposure scores taken through the eighth week postoperative revealed that Epi-Guide was less likely to become exposed than Guidor. The findings of this study, which was conducted over a 12-month period, demonstrated that Epi-Guide and Guidor were comparable as measured by clinical probing determinations.

Hand rehabilitation after stroke using a wearable, high DOF, spring powered exoskeleton.

PubMed

Tianyao Chen; Lum, Peter S

2016-08-01

Stroke patients often have inappropriate finger flexor activation and finger extensor weakness, which makes it difficult to open their affected hand for functional grasp. The goal was to develop a passive, lightweight, wearable device to enable improved hand function during performance of activities of daily living. The device, HandSOME II, assists with opening the patient's hand using 11 elastic actuators that apply extension torques to finger and thumb joints. Device design and initial testing are described. A novel mechanical design applies forces orthogonal to the finger segments despite the fact that all of the device DOFs are not aligned with human joint DOF. In initial testing with seven stroke subjects with impaired hand function, use of HandSOME II significantly increased maximum extension angles and range of motion in all of the index finger joints (P<;0.05). HandSOME II allows performance of all the grip patterns used in daily activities and can be used as part of home-based therapy programs.

Usability of a virtual reality environment simulating an automated teller machine for assessing and training persons with acquired brain injury

PubMed Central

2010-01-01

Objective This study aimed to examine the usability of a newly designed virtual reality (VR) environment simulating the operation of an automated teller machine (ATM) for assessment and training. Design Part I involved evaluation of the sensitivity and specificity of a non-immersive VR program simulating an ATM (VR-ATM). Part II consisted of a clinical trial providing baseline and post-intervention outcome assessments. Setting A rehabilitation hospital and university-based teaching facilities were used as the setting. Participants A total of 24 persons in the community with acquired brain injury (ABI) - 14 in Part I and 10 in Part II - made up the participants in the study. Interventions In Part I, participants were randomized to receive instruction in either an "early" or a "late" VR-ATM program and were assessed using both the VR program and a real ATM. In Part II, participants were assigned in matched pairs to either VR training or computer-assisted instruction (CAI) teaching programs for six 1-hour sessions over a three-week period. Outcome Measures Two behavioral checklists based on activity analysis of cash withdrawals and money transfers using a real ATM were used to measure average reaction time, percentage of incorrect responses, level of cues required, and time spent as generated by the VR system; also used was the Neurobehavioral Cognitive Status Examination. Results The sensitivity of the VR-ATM was 100% for cash withdrawals and 83.3% for money transfers, and the specificity was 83% and 75%, respectively. For cash withdrawals, the average reaction time of the VR group was significantly shorter than that of the CAI group (p = 0.021). We found no significant differences in average reaction time or accuracy between groups for money transfers, although we did note positive improvement for the VR-ATM group. Conclusion We found the VR-ATM to be usable as a valid assessment and training tool for relearning the use of ATMs prior to real-life practice in persons with ABI. PMID:20429955

The Mid America Heart Institute: part II.

PubMed

McCallister, Ben D; Steinhaus, David M

2003-01-01

The Mid America Heart Institute (MAHI) is one of the first and largest hospitals developed and designed specifically for cardiovascular care. The MAHI hybrid model, which is a partnership between the not-for-profit Saint Luke's Health System, an independent academic medical center, and a private practice physician group, has been extremely successful in providing high-quality patient care as well as developing strong educational and research programs. The Heart Institute has been the leader in providing cardiovascular care in the Kansas City region since its inception in 1975. Although challenges in the future are substantial, it is felt that the MAHI is in an excellent position to deal with the serious issues in health care because of the Heart Institute, its facility, organization, administration, dedicated medical and support staff, and its unique business model of physician management. In part I, the authors described the background and infrastructure of the Heart Institute. In part II, cardiovascular research and benefits of physician management are addressed.

Part II: The Effects of Aromatherapy and Guided Imagery for the Symptom Management of Anxiety, Pain, and Insomnia in Critically Ill Patients: An Integrative Review of Current Literature.

PubMed

Meghani, Naheed; Tracy, Mary Fran; Hadidi, Niloufar Niakosari; Lindquist, Ruth

This review is part II of a 2-part series that presents evidence on the effectiveness of aromatherapy and guided imagery for the symptom management of anxiety, pain, and insomnia in adult critically ill patients. Evidence from this review supports the use of aromatherapy for management of pain, insomnia, and anxiety in critically ill patients. Evidence also supports the use of guided imagery for managing these symptoms in critical care; however, the evidence is sparse, mixed, and weak. More studies with larger samples and stronger designs are needed to further establish efficacy of guided imagery for the management of anxiety, pain, and insomnia of critically ill patients; to accomplish this, standardized evidence-based intervention protocols to ensure comparability and to establish optimal effectiveness are needed. Discussion and recommendations related to the use of these therapies in practice and needs for future research in these areas were generated.

10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC and...

10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC and...

10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC and...

10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC and...

Resonant excitation of high order modes in the 3.9 GHz cavity of the Linac Coherent Light Source

DOE PAGES

Lunin, A.; Khabiboulline, T.; Solyak, N.; ...

2018-02-06

Construction of the Linac Coherent Light Source II (LCLS-II) is underway for the world’s first hard x-ray free-electron laser. A central part of the LCLS-II project is a 4 GeV superconducting radio frequency electron linac that will operate in the continuous wave (cw) mode. The linac is segmented into four sections named as L0, L1, L2, and L3. Two 3.9 GHz cryomodules, each housing of eight third-harmonic cavities similar to the cavities developed for the European X-ray Free Electron Laser (XFEL), will be used in section L1 of the linac for linearizing the longitudinal beam profile. Here in this paper, we presentmore » a study of trapped high order modes (HOMs) excited by a cw electron beam in the third-harmonic cavities of the LCLS-II linac. A detailed comparison of the original XFEL design and the LCLS-II design with a modified end group is performed in order to estimate the effect of a reduced beam pipe aperture on the efficiency of HOM damping. Furthermore, we apply a statistical analysis of the eigenmode spectrum for the estimation of the probability of resonant HOM losses and influence of HOMs on beam dynamics.« less

Resonant excitation of high order modes in the 3.9 GHz cavity of the Linac Coherent Light Source

NASA Astrophysics Data System (ADS)

Lunin, A.; Khabiboulline, T.; Solyak, N.; Sukhanov, A.; Yakovlev, V.

2018-02-01

Construction of the Linac Coherent Light Source II (LCLS-II) is underway for the world's first hard x-ray free-electron laser. A central part of the LCLS-II project is a 4 GeV superconducting radio frequency electron linac that will operate in the continuous wave (cw) mode. The linac is segmented into four sections named as L 0 , L 1 , L 2 , and L 3 . Two 3.9 GHz cryomodules, each housing of eight third-harmonic cavities similar to the cavities developed for the European X-ray Free Electron Laser (XFEL), will be used in section L 1 of the linac for linearizing the longitudinal beam profile. In this paper, we present a study of trapped high order modes (HOMs) excited by a cw electron beam in the third-harmonic cavities of the LCLS-II linac. A detailed comparison of the original XFEL design and the LCLS-II design with a modified end group is performed in order to estimate the effect of a reduced beam pipe aperture on the efficiency of HOM damping. Furthermore, we apply a statistical analysis of the eigenmode spectrum for the estimation of the probability of resonant HOM losses and influence of HOMs on beam dynamics.

Aerospace Toolbox--a flight vehicle design, analysis, simulation, and software development environment II: an in-depth overview

NASA Astrophysics Data System (ADS)

Christian, Paul M.

2002-07-01

This paper presents a demonstrated approach to significantly reduce the cost and schedule of non real-time modeling and simulation, real-time HWIL simulation, and embedded code development. The tool and the methodology presented capitalize on a paradigm that has become a standard operating procedure in the automotive industry. The tool described is known as the Aerospace Toolbox, and it is based on the MathWorks Matlab/Simulink framework, which is a COTS application. Extrapolation of automotive industry data and initial applications in the aerospace industry show that the use of the Aerospace Toolbox can make significant contributions in the quest by NASA and other government agencies to meet aggressive cost reduction goals in development programs. The part I of this paper provided a detailed description of the GUI based Aerospace Toolbox and how it is used in every step of a development program; from quick prototyping of concept developments that leverage built-in point of departure simulations through to detailed design, analysis, and testing. Some of the attributes addressed included its versatility in modeling 3 to 6 degrees of freedom, its library of flight test validated library of models (including physics, environments, hardware, and error sources), and its built-in Monte Carlo capability. Other topics that were covered in part I included flight vehicle models and algorithms, and the covariance analysis package, Navigation System Covariance Analysis Tools (NavSCAT). Part II of this series will cover a more in-depth look at the analysis and simulation capability and provide an update on the toolbox enhancements. It will also address how the Toolbox can be used as a design hub for Internet based collaborative engineering tools such as NASA's Intelligent Synthesis Environment (ISE) and Lockheed Martin's Interactive Missile Design Environment (IMD).

Integrated Microphotonic Receiver for Ka-Band

NASA Technical Reports Server (NTRS)

Levi, A. F. J.

2005-01-01

This report consists of four main sections. Part I: LiNbO3 microdisk resonant optical modulator. Brief review of microdisk optical resonator and RF ring resonator. Microwave and photonic design challenges for achieving simultaneous RF-optical resonance are addressed followed by our solutions. Part II: Experimental demonstration of LiNbO3 microdisk modulator performance in wired and wireless RF-optical links. Part III: Microphotonic RF receiver architecture that exploits the nonlinear modulation in the LiNbO3 microdisk modulator to achieve direct photonic down-conversion from RF carrier without using any high-speed electronic elements. Part IV: Ultimate sensitivity of the microdisk photonic receiver and the future road map toward a practical device.

Inspection qualification (IQ) and operational qualification (OQ) for a vacuum freeze-dryer--Part II: Inspection qualification.

PubMed

Jennings, T A; Scheer, A; Emodi, A; Puderbach, L; King, S; Norton, T

1996-01-01

This paper demonstrates the importance of the inspection qualification (IQ). It was shown that the facilities were adequate to house the dryer and its associated instrumentation, and that the facilities had sufficient utilities to operate the dryer. The IQ established that the design and construction of the dryer was in agreement with the proposed hardware and design specifications. It was verified that the dryer was constructed in accordance with specifications set-forth by the equipment manufacturer.

Chip Scale, Ultra Sensitive Opto Mechanical Acceleration and Force Sensors

DTIC Science & Technology

2017-12-01

an accelerometer of the same mechanical design as that studied in part A. and shown in Fig. 3. One side of the zipper optical cavity is connected to...Ref. [13]. “Endevco 752A13” is Ref. [30]. “Zipper” is our own work on zipper photonic crystals from Ref. [31]. II Accelerometer Noise and Design ...limit, the shot noise of the light field also imparts a force on , and cause motion of, the mechanical resonator. The acceleration PSD due to back-action

A mixed-methods investigation into the perspectives on mental health and professional treatment among former system youth with mood disorders.

PubMed

Munson, Michelle R; Narendorf, Sarah Carter; Ben-David, Shelly; Cole, Andrea

2018-05-24

Research has shown that how people think about their health (or illnesses) shapes their help-seeking behavior. In this mixed-methods study, we employed a simultaneous concurrent design to explore the perceptions of mental illness among an understudied population: marginalized young adults. Participants were 60 young adults (ages 18-25) who had experienced mood disorders and used multiple public systems of care during their childhoods. Semistructured interviews were conducted to understand participants' illness and treatment experiences during the transition to adulthood. A team of analysts used constant comparison to develop a codebook of the qualitative themes, and quantitative data were examined using SAS 9.3. Findings suggest that some theoretical categories identified in past illness-perceptions frameworks are salient to marginalized young adults (e.g., identity, management-or control-of symptoms), but both the developmental transition to adulthood and experiences with public systems of care add nuanced variations to illness and treatment perceptions. Our study demonstrates that young adults possess a set of beliefs and emotions about their mental health and help-seeking options that need to be better understood to improve engagement and quality of mental health care for this population. Implications for practice, research, and policy are discussed. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Theoretical and computational studies in protein folding, design, and function

NASA Astrophysics Data System (ADS)

Morrissey, Michael Patrick

2000-10-01

In this work, simplified statistical models are used to understand an array of processes related to protein folding and design. In Part I, lattice models are utilized to test several theories about the statistical properties of protein-like systems. In Part II, sequence analysis and all-atom simulations are used to advance a novel theory for the behavior of a particular protein. Part I is divided into five chapters. In Chapter 2, a method of sequence design for model proteins, based on statistical mechanical first-principles, is developed. The cumulant design method uses a mean-field approximation to expand the free energy of a sequence in temperature. The method successfully designs sequences which fold to a target lattice structure at a specific temperature, a feat which was not possible using previous design methods. The next three chapters are computational studies of the double mutant cycle, which has been used experimentally to predict intra-protein interactions. Complete structure prediction is demonstrated for a model system using exhaustive, and also sub-exhaustive, double mutants. Nonadditivity of enthalpy, rather than of free energy, is proposed and demonstrated to be a superior marker for inter-residue contact. Next, a new double mutant protocol, called exchange mutation, is introduced. Although simple statistical arguments predict exchange mutation to be a more accurate contact predictor than standard mutant cycles, this hypothesis was not upheld in lattice simulations. Reasons for this inconsistency will be discussed. Finally, a multi-chain folding algorithm is introduced. Known as LINKS, this algorithm was developed to test a method of structure prediction which utilizes chain-break mutants. While structure prediction was not successful, LINKS should nevertheless be a useful tool for the study of protein-protein and protein-ligand interactions. The last chapter of Part I utilizes the lattice to explore the differences between standard folding, from the fully denatured state, and cotranslational folding, whereby one end of a protein is synthesized and released before the other. Cotranslational folding is shown to accelerate folding kinetics, particularly when the target backbone contains many local contacts. Additionally, cotranslation is shown capable of "guiding" a model protein into a metastable, local contact-rich state, despite the existence of a true native state of much lower energy. In Part II, a model is developed for the behavior of PrP, a unique mammalian protein which has been shown to possess two native states. The pathogenic "scrapie" state PrPSc, which has not been structurally characterized, is known to trigger conversion of the characterized endogenous conformation PrPC into additional PrPSc, Residues 144--153 are shown to form the most hydrophilic naturally occurring alpha-helix, out of a broad database with more than 10,000 candidates. The novel beta-nucleation model proposes that PrPSc, is not a distinct mono-molecular state, but is rather a beta-sheet-like aggregate centered around helix-1 components of multiple PrP molecules. The remainder of Part II uses molecular dynamics simulations to support the beta-nucleation hypothesis, and to propose a system of peptide ligands which may arrest the process of prion propagation.

40 CFR 723.175 - Chemical substances used in or for the manufacture or processing of instant photographic and peel...

Code of Federal Regulations, 2010 CFR

2010-07-01

... manufacture and processing in the special production area. All manufacturing, processing, and use operations... shape or design during manufacture, (ii) which has end use function(s) dependent in whole or in part... production area, the ambient air concentration of the new chemical substance during manufacture, processing...

40 CFR Appendix E to Part 63 - Monitoring Procedure for Nonthoroughly Mixed Open Biological Treatment Systems at Kraft Pulp...

Code of Federal Regulations, 2012 CFR

2012-07-01

.... II. Definitions Biological treatment unit = wastewater treatment unit designed and operated to... last zone in the series and ending with the first zone. B. Data Collection Requirements This method is based upon modeling the nonthoroughly mixed open biological treatment unit as a series of well-mixed...

Introduction to Engineering. Course I: Challenges of Engineering. Course II: Engineering Projects.

ERIC Educational Resources Information Center

Barrier, Lynn P.

This guide, which is designed to be used in a two-course sequence, is intended to prepare college-bound high school juniors and seniors for engineering and related courses at the college level. The guide was developed as part of an experimental competency-based curriculum that integrates the high-tech applications of mathematics and science…

The Community College and International Education: A Report of Progress. Volume II.

ERIC Educational Resources Information Center

Fersh, Seymour, Ed.; Greene, William, Ed.

Designed to highlight the progress made by community colleges in the United States in the area of international education, this report presents a collection of materials representing various state and institutional initiatives and efforts. Part I contains articles by Hugh Adams and William Greene, and Maxwell King and Seymour Fersh that provide a…

La Experiencia Mexicana (The Mexican Experience). Volumes I and II.

ERIC Educational Resources Information Center

Finer, Neal B.

Designed to be used as part of a comprehensive social studies program on Mexican culture, this two-volume manual, written in Spanish, offers an instructional package on Mexican culture, stressing an art-architecture perspective, which can be used at the secondary, college and adult levels. The teacher's guide, Volume I, includes a discussion of a…

Guidelines for School Property Accounting in Colorado, Part II--General Fixed Asset Accounts.

ERIC Educational Resources Information Center

Stiverson, Clare L.

The second publication of a series of three issued by the Colorado Department of Education is designed as a guide for local school districts in the development of a property accounting system. It defines and classifies groups of accounts whereby financial information, taken from inventory records, may be transcribed into debit and credit entries…

Critical Thinking: Strategies for Improving Student Learning, Part II

ERIC Educational Resources Information Center

Paul, Richard; Elder, Linda

2008-01-01

In the last column we focused (as a primary goal of instruction) on the importance of teaching so that students learn to think their way into and through content. We stressed the need for well-designed daily structures and tactics for fostering deep learning, offering three strategies as examples. In this column, we provide four additional…

School Environment Handbook Part II: Environmental Awareness and Assessment of the School Environment.

ERIC Educational Resources Information Center

deHaas, Patricia; Gillespie, Judith

This handbook is divided into two sections focusing on awareness and assessment activities designed to improve the total environment of the school. The activities can be used by one or more persons, and are appropriate for students, teachers, support staff, and administrators. The first section presents suggestions and activities to help explore…

Matrices. New Topics for Secondary School Mathematics: Materials and Software.

ERIC Educational Resources Information Center

North Carolina School of Science and Mathematics. Dept. of Mathematics and Computer Science.

This material on matrices is part of "Introduction to College Mathematics" (ICM), designed to prepare high school students who have students who have completed algebra II for the variety of mathematics they will encounter in college and beyond. The concept goals of this unit are to use matrices to model real-world phenomena, to use matrices as…

Institutional Approaches to Innovation and Change (II): The Configurational Perspective on Institution Building.

ERIC Educational Resources Information Center

Bhola, H. S.

Institution building is considered as a process amenable to both explanation and design if a generic "grammar of artifactual action" is used. The Configurational Theory of Innovation Diffusion model (CLER) is introduced and used to demonstrate how the world of the institution builder could be ordered as part of such grammar for designing…

75 FR 71556 - Polyoxyalkylated Glycerol Fatty Acid Esters; Tolerance Exemption

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-24

... a finite tolerance is not necessary to ensure that there is a reasonable certainty that no harm will... polymer does contain as an integral part of its composition the atomic elements carbon, hydrogen, and... element other than those listed in 40 CFR 723.250(d)(2)(ii). 4. The polymer is neither designed nor can it...

Electrical Experiments. VT-214-12-2. Part II. A-C Across the Line Control.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

Designed for high school electronics students, this second document in a series of six electrical learning activity packages focuses on alternating current across-the-line control. An introductory section gives the objective for the activities, an introduction, and an outline of the content. The remainder of the activity book is comprised of…

FISH COMMUNITIES IN LAKE IN SUBREGION 2B (UPPER PENINSULA OF MICHIGAN) IN RELATION TO LAKE ACIDITY: VOLUME I

EPA Science Inventory

Surveys of fish community status were conducted in summer 1987 in 49 lakes in Subregion 20, the Upper Peninsula of Michigan, as part of Phase II of the Eastern Lake Survey. Lake selection involved a variable probability sampling design. Fish communities were surveyed using gill n...

Marine Biology and Oceanography, Grades Nine to Twelve. Part II.

ERIC Educational Resources Information Center

Kolb, James A.

This unit, one of a series designed to develop and foster an understanding of the marine environment, presents marine science activities for students in grades 9-12. The unit, focusing on sea plants/animals and their interactions with each other and the non-living environment, has sections dealing with: marine ecology; marine bacteriology;…

AUTOMOTIVE DIESEL MAINTENANCE 2 UNIT IV, AUTOMATIC TRANSMISSIONS--HYDRAULICS (PART II).

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATION AND MAINTENANCE OF VALVES UTILIZED IN HYDRAULIC TRANSMISSIONS USED ON DIESEL POWERED VEHICLES. TOPICS ARE (1) REVIEWING FACTS ABOUT PUMPS, (2) USING VALVES FOR CONTROL, (3) TROUBLESHOOTING PROCEDURES ON RELIEF VALVES, (4) USING DIRECTIONAL CONTROL VALVES,…

AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT X, AUTOMATIC TRANSMISSIONS--HYDRAULIC SYSTEMS (PART II).

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO PROVIDE A SUMMARY OF MAINTENANCE PROCEDURES FOR AUTOMATIC TRANSMISSIONS USED ON DIESEL POWERED VEHICLES. TOPICS ARE (1) CHECKING THE HYDRAULIC SYSTEM, (2) SERVICING THE HYDRAULIC SYSTEM, (3) EXAMINING THE RANGE CONTROL VALVE, (4) EXAMINING THE LOCK-UP AND FLOW VALVE, (5) EXAMINING THE MAIN REGULATOR…

Building Effective Partnerships: A Win-Win Approach. Module II. Job Match: Together for Good Business.

ERIC Educational Resources Information Center

Banzhaf, Katie; And Others

Intended for use with personnel in business, industry, and human service agencies, the training module is part of a kit designed to demonstrate how individuals with disabilities and older persons can be assimilated successfully into the labor force. This module explains partnerships between businesses and human service agencies. It emphasizes the…

Ecuadorian Quecha Basic Course. Part II: Introduction and Pre-Class Modules.

ERIC Educational Resources Information Center

Ott, Clarence Eric; And Others

The second of a two-volume series on Ecuadorian Quechua, this text contains 15 units of preclass instructional material designed for individualized study with the use of accompanying tapes. Each unit of the course has a homework section, called a module, to be completed before classwork may be started. Cartoon figures illustrate the instructional…

User Centered System Design. Part II: Collected Papers from the UCSD HMI Project.

ERIC Educational Resources Information Center

California Univ., San Diego, La Jolla. Inst. for Cognitive Science.

This report is a collection of 11 recent papers by the Human-Machine Interaction Group at the University of California, San Diego. The following papers are included: (1) "Stages and Levels in Human-Machine Interaction," Donald A. Norman; (2) "The Nature of Expertise in UNIX," Stephen W. Draper; (3) "Users in the Real…

Job Aid Manuals for Phase 2-DESIGN of the Instructional Systems Development Model

DTIC Science & Technology

1980-05-01

and sources of this data should be part of the overall Job Analysis Plan. I 61 L ... ............ ..6 WHAT ARE SOME SOURCES OF JOB SIGNIFICANT DATA...SECTION II ’ f .330- S*15’- /PAW $i~ii. TEIIMTJAL IkAHIN (C 11 IVE . .... .. AA t fi -twill Ailf. fe’o- point A +o pom14 Ji - & map, cemoa9j sund...Leaqrr AIrloesr displayed by the Learnrrq Pyfamd. ,derrfie the An"lIys on Task lemei hdedarchy Olud,,iormole to rrrdleel ut skds bn k-ro edes req,.,ed l

Does the Cultural Formulation Interview for the fifth revision of the diagnostic and statistical manual of mental disorders (DSM-5) affect medical communication? A qualitative exploratory study from the New York site.

PubMed

Aggarwal, Neil K; Desilva, Ravi; Nicasio, Andel V; Boiler, Marit; Lewis-Fernández, Roberto

2015-01-01

Cross-cultural mental health researchers often analyze patient explanatory models of illness to optimize service provision. The Cultural Formulation Interview (CFI) is a cross-cultural assessment tool released in May 2013 with DSM-5 to revise shortcomings from the DSM-IV Outline for Cultural Formulation (OCF). The CFI field trial took place in 6 countries, 14 sites, and with 321 patients to explore its feasibility, acceptability, and clinical utility with patients and clinicians. We sought to analyze if and how CFI feasibility, acceptability, and clinical utility were related to patient-clinician communication. We report data from the New York site which enrolled 7 clinicians and 32 patients in 32 patient-clinician dyads. We undertook a data analysis independent of the parent field trial by conducting content analyses of debriefing interviews with all participants (n = 64) based on codebooks derived from frameworks for medical communication and implementation outcomes. Three coders created codebooks, coded independently, established inter-rater coding reliability, and analyzed if the CFI affects medical communication with respect to feasibility, acceptability, and clinical utility. Despite racial, ethnical, cultural, and professional differences within our group of patients and clinicians, we found that promoting satisfaction through the interview, eliciting data, eliciting the patient's perspective, and perceiving data at multiple levels were common codes that explained how the CFI affected medical communication. We also found that all but two codes fell under the implementation outcome of clinical utility, two fell under acceptability, and none fell under feasibility. Our study offers new directions for research on how a cultural interview affects patient-clinician communication. Future research can analyze how the CFI and other cultural interviews impact medical communication in clinical settings with subsequent effects on outcomes such as medication adherence, appointment retention, and health condition.

Permanent-magnet linear alternators. I - Fundamental equations. II - Design guidelines

NASA Astrophysics Data System (ADS)

Boldea, I.; Nasar, S. A.

1987-01-01

The general equations of permanent-magnet heteropolar three-phase and single-phase linear alternators, powered by free-piston Stirling engines, are presented, with application to space power stations and domestic applications including solar power plants. The equations are applied to no-load and short-circuit conditions, illustrating the end-effect caused by the speed-reversal process. In the second part, basic design guidelines for a three-phase tubular linear alternator are given, and the procedure is demonstrated with the numerical example of the design of a 25-kVA, 14.4-m/s, 120/220-V, 60-Hz alternator.

International Strategic Minerals Inventory summary report; phosphate

USGS Publications Warehouse

Krauss, Ulrich H.; Saam, Henning G.; Schmidt, Helmut

1984-01-01

Major world resources of phosphate, a strategic mineral commodity, are described in this summary report of information in the International Strategic Minerals Inventory {ISMI}. ISMI is a cooperative data-collection effort of earth-science and mineral-resource agencies in Australia, Canada, the Federal Republic of Germany, the Republic of South Africa, and the United States of America. This report, designed to be of benefit to policy analysts, contains two parts. Part I presents an overview of the resources and potential supply of phosphate on the basis of inventory information. Part II contains tables of some of the geologic information and mineral-resource and production data that were collected by ISMI participants.

U.S. Geological Survey Trace Elements and related reports through 1954

USGS Publications Warehouse

Smith, Harriet G. Brown; Blatcher, Virginia K.

1955-01-01

This report supersedes TEI-400, "U.S. Geological Survey Trace Elements and related reports through 1953." Part I is a numerical list of U.S. Geological Survey Trace Elements Investigations and Memorandum reports. This part lists not only reports (followed by a date) that have been transmitted to the U.S> Atomic Energy Commission, but also reports in preparation (followed by an asterisk) for which tentative titles were available on December 31, 1954. If a report, or portion of a report, has been published, the fact is indicated by the abbreviation of the medium of publication. (See also Part II.) Part II is a reference guide to Trace Elements and related reports that are available to the public (this part supersedes Part I of Bulletin 1019-B). These reports are grouped according to the type of publication or release. If a report, or portion of the report, has been published in more than one form, appropriate cross-references are given to indicate the other forms of publication. Abstracts published in Nuclear Science Abstracts are not included in Part II; however, if the abstract of a Trace Elements report has been published in NSA, the fact is indicated in Part I. Publications in process on December 31, 1954, are designated by an asterisk. Part III is a finding list of states, areas, and subjects and supersedes Part II of Bulletin 1019-B. It is based on information derived mostly from the titles of reports and, where titles are of general nature, from a cursory review of the reports. This list is not a complete index of the information given in Trace Elements and related reports, but is designed to find subjects of major interest, Because of the numerous entries for Colorado and Utah, information has been listed by counties and, where possible, by subject under these states. Other states have county listings only if a county is included in the title of a report; otherwise, area may be listed separately under the state. Major subjects are listed separately in the index and also, where appropriate under states. Analytical methods and subjects related to analytical research are listed under Analytical Methods and Research, but not separately throughout the index. Most mineralogic studies are included under the heading Mineralogy, but are not necessarily listed according to location. Part IV is an author index. The words “with” and “and” are used to indicate seniority of authorship. For example, a listing of Smith and Brown indicated that Smith is the senior author. A listing of Smith with Brown indicates that Brown is the senior author. In both parts III and IV all Trace Elements reports are listed, as well as other related reports that have not been issued as Trace Elements reports. The following abbreviations have been used: TEI, Trace Elements Investigations report; TEM, Trace Elements Memorandum report; OF, open file; TIS, Technical Information Service release; C, Circular; B, Bulletin; P, Professional Paper; MC, Maps and Charts; J, Journal; and NSA, Nuclear Science Abstracts.

Biomechanics of the Sensor–Tissue Interface—Effects of Motion, Pressure, and Design on Sensor Performance and the Foreign Body Response—Part I: Theoretical Framework

PubMed Central

Helton, Kristen L; Ratner, Buddy D; Wisniewski, Natalie A

2011-01-01

The importance of biomechanics in glucose sensor function has been largely overlooked. This article is the first part of a two-part review in which we look beyond commonly recognized chemical biocompatibility to explore the biomechanics of the sensor–tissue interface as an important aspect of continuous glucose sensor biocompatibility. Part I provides a theoretical framework to describe how biomechanical factors such as motion and pressure (typically micromotion and micropressure) give rise to interfacial stresses, which affect tissue physiology around a sensor and, in turn, impact sensor performance. Three main contributors to sensor motion and pressure are explored: applied forces, sensor design, and subject/patient considerations. We describe how acute forces can temporarily impact sensor signal and how chronic forces can alter the foreign body response and inflammation around an implanted sensor, and thus impact sensor performance. The importance of sensor design (e.g., size, shape, modulus, texture) and specific implant location on the tissue response are also explored. In Part II: Examples and Application (a sister publication), examples from the literature are reviewed, and the application of biomechanical concepts to sensor design are described. We believe that adding biomechanical strategies to the arsenal of material compositions, surface modifications, drug elution, and other chemical strategies will lead to improvements in sensor biocompatibility and performance. PMID:21722578

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This bibliography provides documentation for use by state public utility commissions and major nonregulated utilities in evaluating the applicability of a wide range of electric utility rate design and regulatory concepts in light of certain regulatory objectives. Part I, Utility Regulatory Objectives, contains 2084 citations on conservation of energy and capital; efficient use of facilities and resources; and equitable rates to electricity consumers. Part II, Rate Design Concepts, contains 1238 citations on time-of-day rates; seasonally-varying rates; cost-of-service rates; interruptible rates (including the accompanying use of load management techniques); declining block rates; and lifeline rates. Part III, Regulatory Concepts, contains 1282more » references on restrictions on master metering; procedures for review of automatic adjustment clauses; prohibitions of rate or regulatory discrimination against solar, wind, or other small energy systems; treatment of advertising expenses; and procedures to protect ratepayers from abrupt termination of service.« less

Waste Isolation Pilot Plant (WIPP) conceptual design report. Part I: executive summary. Part II: facilities and system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-06-01

The pilot plant is developed for ERDA low-level contact-handled transuranic waste, ERDA remote-handled intermediate-level transuranic waste, and for high-level waste experiments. All wastes placed in the WIPP arrive at the site processed and packaged; no waste processing is done at the WIPP. All wastes placed into the WIPP are retrievable. The proposed site for WIPP lies 26 miles east of Carlsbad, New Mexico. This document includes the executive summary and a detailed description of the facilities and systems. (DLC)

40 CFR Appendixes I-Ii to Part 268 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false [Reserved] I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268 [Reserved] ...

40 CFR Appendixes I-Ii to Part 268 - [Reserved

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 27 2011-07-01 2011-07-01 false [Reserved] I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268 [Reserved] ...

40 CFR Appendixes I-Ii to Part 268 - [Reserved

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 27 2014-07-01 2014-07-01 false [Reserved] I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268 [Reserved] ...

40 CFR Appendixes I-Ii to Part 268 - [Reserved

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 28 2012-07-01 2012-07-01 false [Reserved] I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268 [Reserved] ...

40 CFR Appendixes I-Ii to Part 268 - [Reserved

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 28 2013-07-01 2013-07-01 false [Reserved] I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268 [Reserved] ...

A Bayesian adaptive design for biomarker trials with linked treatments

PubMed Central

Wason, James M S; Abraham, Jean E; Baird, Richard D; Gournaris, Ioannis; Vallier, Anne-Laure; Brenton, James D; Earl, Helena M; Mander, Adrian P

2015-01-01

Background: Response to treatments is highly heterogeneous in cancer. Increased availability of biomarkers and targeted treatments has led to the need for trial designs that efficiently test new treatments in biomarker-stratified patient subgroups. Methods: We propose a novel Bayesian adaptive randomisation (BAR) design for use in multi-arm phase II trials where biomarkers exist that are potentially predictive of a linked treatment's effect. The design is motivated in part by two phase II trials that are currently in development. The design starts by randomising patients to the control treatment or to experimental treatments that the biomarker profile suggests should be active. At interim analyses, data from treated patients are used to update the allocation probabilities. If the linked treatments are effective, the allocation remains high; if ineffective, the allocation changes over the course of the trial to unlinked treatments that are more effective. Results: Our proposed design has high power to detect treatment effects if the pairings of treatment with biomarker are correct, but also performs well when alternative pairings are true. The design is consistently more powerful than parallel-groups stratified trials. Conclusions: This BAR design is a powerful approach to use when there are pairings of biomarkers with treatments available for testing simultaneously. PMID:26263479

Additive Manufacture of Plasma Diagnostic Components Final Report Phase II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woodruff, Simon; Romero-Talamas, Carlos; You, Setthivoine

There is now a well-established set of plasma diagnostics (see e.g. [3]), but these remain some of the mostexpensive assemblies in fusion systems since for every system they have to be custom built, and time fordiagnostic development can pace the project. Additive manufacturing (AM) has the potential to decreaseproduction cost and significantly lower design time of fusion diagnostic subsystems, which would realizesignificant cost reduction for standard diagnostics. In some cases, these basic components can be additivelymanufactured for less than 1/100th costs of conventional manufacturing.In our DOE Phase II SBIR, we examined the impact that AM can have on plasma diagnosticmore » cost bytaking 15 separate diagnostics through an engineering design using Conventional Manufacturing (CM) tech-niques, then optimizing the design to exploit the benefits of AM. The impact of AM techniques on cost isfound to be in several areas. First, the cost of materials falls because AM parts can be manufactured withlittle to no waste, and engineered to use less material than CM. Next, the cost of fabrication falls for AMparts relative to CM since the fabrication time can be computed exactly, and often no post-processing isrequired for the part to be functional. We find that AM techniques are well suited for plasma diagnosticssince typical diagnostic complexity comes at no additional cost. Cooling channels, for example, can be builtin to plasma-facing components at no extra cost. Fabrication costs associated with assembly are lower forAM parts because many components can be combined and printed as monoliths, thereby mitigating the needfor alignment or calibration. Finally, the cost of engineering is impacted by exploiting AM design tools thatallow standard components to be customized through web-interfaces. Furthermore, we find that conceptdesign costs can be impacted by scripting interfaces for online engineering design tools.« less

An Analysis of a Finite Element Method for Convection-Diffusion Problems. Part II. A Posteriori Error Estimates and Adaptivity.

DTIC Science & Technology

1983-03-01

AN ANALYSIS OF A FINITE ELEMENT METHOD FOR CONVECTION- DIFFUSION PROBLEMS PART II: A POSTERIORI ERROR ESTIMATES AND ADAPTIVITY by W. G. Szymczak Y 6a...PERIOD COVERED AN ANALYSIS OF A FINITE ELEMENT METHOD FOR final life of the contract CONVECTION- DIFFUSION PROBLEM S. Part II: A POSTERIORI ERROR ...Element Method for Convection- Diffusion Problems. Part II: A Posteriori Error Estimates and Adaptivity W. G. Szvmczak and I. Babu~ka# Laboratory for

Factors affecting pre-ovulatory follicle diameter and ovulation rate following GnRH in postpartum beef cows Part II: Anestrous cows

USDA-ARS?s Scientific Manuscript database

The objectives of this study were to identify factors affecting ovulatory follicle size in anestrous suckled beef cows so that we could determine how ovulatory follicle size affects fertility. This study used a two by two factorial design in which anestrous suckled beef cows (n = 55) either ovulate...

Measuring border delay and crossing times at the US-Mexico border : part II. Step-by-step guidelines for implementing a radio frequency identification (RFID) system to measure border crossing and wait times.

DOT National Transportation Integrated Search

2012-06-01

The purpose of these step-by-step guidelines is to assist in planning, designing, and deploying a system that uses radio frequency identification (RFID) technology to measure the time needed for commercial vehicles to complete the northbound border c...

15 CFR Supplement No. 4 to Part 774 - Commerce Control List Order of Review

Code of Federal Regulations, 2014 CFR

2014-01-01

...” paragraph such as a “.x” paragraph that controls unspecified “parts” and “components” “specially designed... ECCN paragraph that contains a “specially designed” control parameter. Skip to Step 5. (ii) Step 4.b... within the scope of the ECCN paragraph that contains a “specially designed” control parameter. Note to...

Survey Instrument Validity Part II: Validation of a Survey Instrument Examining Athletic Trainers' Knowledge and Practice Beliefs Regarding Exertional Heat Stroke

ERIC Educational Resources Information Center

Burton, Laura J.; Mazerolle, Stephanie M.

2011-01-01

Objective: The purpose of this article is to discuss the process of developing and validating an instrument to investigate an athletic trainer's attitudes and behaviors regarding the recognition and treatment of exertional heat stroke. Background: Following up from our initial paper, which discussed the process of survey instrument design and…

Biogeochemical Cycles for Combining Chemical Knowledge and ESD Issues in Greek Secondary Schools Part II: Assessing the Impact of the Intervention

ERIC Educational Resources Information Center

Koutalidi, Sophia; Psallidas, Vassilis; Scoullos, Michael

2016-01-01

In searching for effective ways to combine science/chemical education with EE/ESD, new didactic materials were designed and produced focussing on biogeochemical cycles and their connection to sustainable development. The materials were experimentally applied in 16 Greek schools under the newly introduced compulsory "school project" which…

Bayesian Probability Theory

NASA Astrophysics Data System (ADS)

von der Linden, Wolfgang; Dose, Volker; von Toussaint, Udo

2014-06-01

Preface; Part I. Introduction: 1. The meaning of probability; 2. Basic definitions; 3. Bayesian inference; 4. Combinatrics; 5. Random walks; 6. Limit theorems; 7. Continuous distributions; 8. The central limit theorem; 9. Poisson processes and waiting times; Part II. Assigning Probabilities: 10. Transformation invariance; 11. Maximum entropy; 12. Qualified maximum entropy; 13. Global smoothness; Part III. Parameter Estimation: 14. Bayesian parameter estimation; 15. Frequentist parameter estimation; 16. The Cramer-Rao inequality; Part IV. Testing Hypotheses: 17. The Bayesian way; 18. The frequentist way; 19. Sampling distributions; 20. Bayesian vs frequentist hypothesis tests; Part V. Real World Applications: 21. Regression; 22. Inconsistent data; 23. Unrecognized signal contributions; 24. Change point problems; 25. Function estimation; 26. Integral equations; 27. Model selection; 28. Bayesian experimental design; Part VI. Probabilistic Numerical Techniques: 29. Numerical integration; 30. Monte Carlo methods; 31. Nested sampling; Appendixes; References; Index.

Problem solving strategies integrated into nursing process to promote clinical problem solving abilities of RN-BSN students.

PubMed

Wang, Jing-Jy; Lo, Chi-Hui Kao; Ku, Ya-Lie

2004-11-01

A set of problem solving strategies integrated into nursing process in nursing core courses (PSNP) was developed for students enrolled in a post-RN baccalaureate nursing program (RN-BSN) in a university in Taiwan. The purpose of this study, therefore, was to evaluate the effectiveness of PSNP on students' clinical problem solving abilities. The one-group post-test design with repeated measures was used. In total 114 nursing students with 47 full-time students and 67 part-time students participated in this study. The nursing core courses were undertaken separately in three semesters. After each semester's learning, students would start their clinical practice, and were asked to submit three written nursing process recordings during each clinic. Assignments from the three practices were named post-test I, II, and III sequentially, and provided the data for this study. The overall score of problem solving indicated that score on the post-test III was significantly better than that on post-test I and II, meaning both full-time and part-time students' clinical problem solving abilities improved at the last semester. In conclusion, problem-solving strategies integrated into nursing process designed for future RN-BSN students are recommendable.

EXPRESS Rack Technology for Space Station

NASA Technical Reports Server (NTRS)

Davis, Ted B.; Adams, J. Brian; Fisher, Edward M., Jr.; Prickett, Guy B.; Smith, Timothy G.

1999-01-01

The EXPRESS rack provides accommodations for standard Mid-deck Locker and ISIS drawer payloads on the International Space Station. A design overview of the basic EXPRESS rack and two derivatives, the Human Research Facility and the Habitat Holding Rack, is given in Part I. In Part II, the design of the Solid State Power Control Module (SSPCM) is reviewed. The SSPCM is a programmable and remotely controllable power switching and voltage conversion unit which distributes and protects up to 3kW of 12OVDC and 28VDC power to payloads and rack subsystem components. Part III details the development and testing of a new data storage device, the BRP EXPRESS Memory Unit (BEMU). The BEMU is a conduction-cooled device which operates on 28VDC and is based on Boeing-modified 9GB commercial disk-drive technology. In Part IV results of a preliminary design effort for a rack Passive Damping System (PDS) are reported. The PDS is intended to isolate ISPR-based experiment racks from on-orbit vibration. System performance predictions based on component developmental testing indicate that such a system can provide effective isolation at frequencies of 1 Hz and above.

GoldenBraid: An Iterative Cloning System for Standardized Assembly of Reusable Genetic Modules

PubMed Central

Sarrion-Perdigones, Alejandro; Falconi, Erica Elvira; Zandalinas, Sara I.; Juárez, Paloma; Fernández-del-Carmen, Asun; Granell, Antonio; Orzaez, Diego

2011-01-01

Synthetic Biology requires efficient and versatile DNA assembly systems to facilitate the building of new genetic modules/pathways from basic DNA parts in a standardized way. Here we present GoldenBraid (GB), a standardized assembly system based on type IIS restriction enzymes that allows the indefinite growth of reusable gene modules made of standardized DNA pieces. The GB system consists of a set of four destination plasmids (pDGBs) designed to incorporate multipartite assemblies made of standard DNA parts and to combine them binarily to build increasingly complex multigene constructs. The relative position of type IIS restriction sites inside pDGB vectors introduces a double loop (“braid”) topology in the cloning strategy that allows the indefinite growth of composite parts through the succession of iterative assembling steps, while the overall simplicity of the system is maintained. We propose the use of GoldenBraid as an assembly standard for Plant Synthetic Biology. For this purpose we have GB-adapted a set of binary plasmids for A. tumefaciens-mediated plant transformation. Fast GB-engineering of several multigene T-DNAs, including two alternative modules made of five reusable devices each, and comprising a total of 19 basic parts are also described. PMID:21750718

GoldenBraid: an iterative cloning system for standardized assembly of reusable genetic modules.

PubMed

Sarrion-Perdigones, Alejandro; Falconi, Erica Elvira; Zandalinas, Sara I; Juárez, Paloma; Fernández-del-Carmen, Asun; Granell, Antonio; Orzaez, Diego

2011-01-01

Synthetic Biology requires efficient and versatile DNA assembly systems to facilitate the building of new genetic modules/pathways from basic DNA parts in a standardized way. Here we present GoldenBraid (GB), a standardized assembly system based on type IIS restriction enzymes that allows the indefinite growth of reusable gene modules made of standardized DNA pieces. The GB system consists of a set of four destination plasmids (pDGBs) designed to incorporate multipartite assemblies made of standard DNA parts and to combine them binarily to build increasingly complex multigene constructs. The relative position of type IIS restriction sites inside pDGB vectors introduces a double loop ("braid") topology in the cloning strategy that allows the indefinite growth of composite parts through the succession of iterative assembling steps, while the overall simplicity of the system is maintained. We propose the use of GoldenBraid as an assembly standard for Plant Synthetic Biology. For this purpose we have GB-adapted a set of binary plasmids for A. tumefaciens-mediated plant transformation. Fast GB-engineering of several multigene T-DNAs, including two alternative modules made of five reusable devices each, and comprising a total of 19 basic parts are also described.

Active Control of Low-Speed Fan Tonal Noise Using Actuators Mounted in Stator Vanes: Part III Results

NASA Technical Reports Server (NTRS)

Sutliff, Daniel L.; Remington, Paul J.; Walker, Bruce E.

2003-01-01

A test program to demonstrate simplification of Active Noise Control (ANC) systems relative to standard techniques was performed on the NASA Glenn Active Noise Control Fan from May through September 2001. The target mode was the m = 2 circumferential mode generated by the rotor-stator interaction at 2BPF. Seven radials (combined inlet and exhaust) were present at this condition. Several different error-sensing strategies were implemented. Integration of the error-sensors with passive treatment was investigated. These were: (i) an in-duct linear axial array, (ii) an induct steering array, (iii) a pylon-mounted array, and (iv) a near-field boom array. The effect of incorporating passive treatment was investigated as well as reducing the actuator count. These simplified systems were compared to a fully ANC specified system. Modal data acquired using the Rotating Rake are presented for a range of corrected fan rpm. Simplified control has been demonstrated to be possible but requires a well-known and dominant mode signature. The documented results here in are part III of a three-part series of reports with the same base title. Part I and II document the control system and error-sensing design and implementation.

Portrayal of Alcohol Intoxication on YouTube

PubMed Central

Primack, Brian A.; Colditz, Jason B.; Pang, Kevin C.; Jackson, Kristina M.

2015-01-01

Background We aimed to characterize the content of leading YouTube videos related to alcohol intoxication and to examine factors associated with alcohol intoxication in videos that were assessed positively by viewers. Methods We systematically captured the 70 most relevant and popular videos on YouTube related to alcohol intoxication. We employed an iterative process to codebook development which resulted in 42 codes in 6 categories: video characteristics, character socio-demographics, alcohol depiction, degree of alcohol use, characteristics associated with alcohol, and consequences of alcohol. Results There were a total of 333,246,875 views for all videos combined. While 89% of videos involved males, only 49% involved females. The videos had a median of 1646 (IQR 300-22,969) “like” designations and 33 (IQR 14-1,261) “dislike” designations each. Liquor was most frequently represented, followed by beer and then wine/champagne. Nearly one-half (44%) of videos contained a brand reference. Humor was juxtaposed with alcohol use in 79% of videos, and motor vehicle use was present in 24%. There were significantly more likes per dislike, indicating more positive sentiment, when there was representation of liquor (29.1 vs. 11.4, p = .008), brand references (32.1 vs. 19.2, p = .04), and/or physical attractiveness (67.5 vs. 17.8, p < .001). Conclusions Internet videos depicting alcohol intoxication are heavily viewed. Nearly half of these videos involve a brand-name reference. While these videos commonly juxtapose alcohol intoxication with characteristics such as humor and attractiveness, they infrequently depict negative clinical outcomes. The popularity of this site may provide an opportunity for public health intervention. PMID:25703135

Clothing resultant thermal insulation determined on a movable thermal manikin. Part II: effects of wind and body movement on local insulation

NASA Astrophysics Data System (ADS)

Lu, Yehu; Wang, Faming; Wan, Xianfu; Song, Guowen; Zhang, Chengjiao; Shi, Wen

2015-10-01

Part II of this two-part series study was focused on examining the effects of wind and body movement on local clothing thermal insulation. Seventeen clothing ensembles with different layers (i.e., 1, 2, or 3 layers) were selected for this study. Local thermal insulation with different air velocities (0.15, 1.55, and 4.0 m/s) and walking speeds (0, 0.75, and 1.17 m/s) were investigated on a thermal manikin. Empirical equations for estimating local resultant clothing insulation as a function of local insulation, air velocity, and walking speed were developed. The results showed that the effects of wind and body movement on local resultant thermal resistance are complex and differ distinctively among different body parts. In general, the reductions of local insulation with wind at the chest, abdomen, and pelvis were greater than those at the lower leg and back, and the changes at the body extremity such as the forearm, thigh, and lower leg were higher than such immobile body parts as the chest and back. In addition, the wind effect interacted with the walking effect. This study may have important applications in human local thermal comfort modeling and functional clothing design.

Clothing resultant thermal insulation determined on a movable thermal manikin. Part II: effects of wind and body movement on local insulation.

PubMed

Lu, Yehu; Wang, Faming; Wan, Xianfu; Song, Guowen; Zhang, Chengjiao; Shi, Wen

2015-10-01

Part II of this two-part series study was focused on examining the effects of wind and body movement on local clothing thermal insulation. Seventeen clothing ensembles with different layers (i.e., 1, 2, or 3 layers) were selected for this study. Local thermal insulation with different air velocities (0.15, 1.55, and 4.0 m/s) and walking speeds (0, 0.75, and 1.17 m/s) were investigated on a thermal manikin. Empirical equations for estimating local resultant clothing insulation as a function of local insulation, air velocity, and walking speed were developed. The results showed that the effects of wind and body movement on local resultant thermal resistance are complex and differ distinctively among different body parts. In general, the reductions of local insulation with wind at the chest, abdomen, and pelvis were greater than those at the lower leg and back, and the changes at the body extremity such as the forearm, thigh, and lower leg were higher than such immobile body parts as the chest and back. In addition, the wind effect interacted with the walking effect. This study may have important applications in human local thermal comfort modeling and functional clothing design.

Computational Approaches for Designing Protein/Inhibitor Complexes and Membrane Protein Variants

NASA Astrophysics Data System (ADS)

Vijayendran, Krishna Gajan

Drug discovery of small-molecule protein inhibitors is a vast enterprise that involves several scientific disciplines (i.e. genomics, cell biology, x-ray crystallography, chemistry, computer science, statistics), with each discipline focusing on a particular aspect of the process. In this thesis, I use computational and experimental approaches to explore the most fundamental aspect of drug discovery: the molecular interactions of small-molecules inhibitors with proteins. In Part I (Chapters I and II), I describe how computational docking approaches can be used to identify structurally diverse molecules that can inhibit multiple protein targets in the brain. I illustrate this approach using the examples of microtubule-stabilizing agents and inhibitors of cyclooxygenase(COX)-I and 5-lipoxygenase (5-LOX). In Part II (Chapters III and IV), I focus on membrane proteins, which are notoriously difficult to work with due to their low natural abundances, low yields for heterologous over expression, and propensities toward aggregation. I describe a general approach for designing water-soluble variants of membrane proteins, for the purpose of developing cell-free, label-free, detergent-free, solution-phase studies of protein structure and small-molecule binding. I illustrate this approach through the design of a water-soluble variant of the membrane protein Smoothened, wsSMO. This wsSMO stands to serve as a first-step towards developing membrane protein analogs of this important signaling protein and drug target.

Summary of development of 70 MW class model superconducting generator--research and development of superconducting for electric power application

NASA Astrophysics Data System (ADS)

Oishi, Ikuo; Nishijima, Kenichi

2002-03-01

A 70 MW class superconducting model generator was designed, manufactured, and tested from 1988 to 1999 as Phase I, which was Japan's national project on applications of superconducting technologies to electric power apparatuses that was commissioned by NEDO as part of New Sunshine Program of AIST and MITI. Phase II then is now being carried out by almost same organization as Phase I. With the development of the 70 MW class superconducting model generator, technologies for a 200 MW class pilot generator were established. The world's largest output (79 MW), world's longest continuous operation (1500 h), and other sufficient characteristics were achieved on the 70 MW class superconducting model generator, and key technologies of design and manufacture required for the 200 MW class pilot generator were established. This project contributed to progress of R&D of power apparatuses. Super-GM has started the next project (Phase II), which shall develop the key technologies for larger-capacity and more-compact machine and is scheduled from 2000 to 2003. Phase II shall be the first step for commercialization of superconducting generator.

Vibration test of 1/5 scale H-II launch vehicle

NASA Astrophysics Data System (ADS)

Morino, Yoshiki; Komatsu, Keiji; Sano, Masaaki; Minegishi, Masakatsu; Morita, Toshiyuki; Kohsetsu, Y.

In order to predict dynamic loads on the newly designed Japanese H-II launch vehicle, the adequacy of prediction methods has been assessed by the dynamic scale model testing. The three-dimensional dynamic model was used in the analysis to express coupling effects among axial, lateral (pitch and yaw) and torsional vibrations. The liquid/tank interaction was considered by use of a boundary element method. The 1/5 scale model of the H-II launch vehicle was designed to simulate stiffness and mass properties of important structural parts, such as core/SRB junctions, first and second stage Lox tanks and engine mount structures. Modal excitation of the test vehicle was accomplished with 100-1000 N shakers which produced random or sinusoidal vibrational forces. The vibrational response of the test vehicle was measured at various locations with accelerometers and pressure sensor. In the lower frequency range, corresmpondence between analysis and experiment was generally good. The basic procedures in analysis seem to be adequate so far, but some improvements in mathematical modeling are suggested by comparison of test and analysis.

A Survey of Optometry Graduates to Determine Practice Patterns: Part II: Licensure and Practice Establishment Experiences.

ERIC Educational Resources Information Center

Bleimann, Robert L.; Smith, Lee W.

1985-01-01

A summary of Part II of a two-volume study of optometry graduates conducted by the Association of Schools and Colleges of Optometry is presented. Part II includes the analysis of the graduates' licensure and practice establishment experiences. (MLW)

Rotorcraft Optimization Tools: Incorporating Rotorcraft Design Codes into Multi-Disciplinary Design, Analysis, and Optimization

NASA Technical Reports Server (NTRS)

Meyn, Larry A.

2018-01-01

One of the goals of NASA's Revolutionary Vertical Lift Technology Project (RVLT) is to provide validated tools for multidisciplinary design, analysis and optimization (MDAO) of vertical lift vehicles. As part of this effort, the software package, RotorCraft Optimization Tools (RCOTOOLS), is being developed to facilitate incorporating key rotorcraft conceptual design codes into optimizations using the OpenMDAO multi-disciplinary optimization framework written in Python. RCOTOOLS, also written in Python, currently supports the incorporation of the NASA Design and Analysis of RotorCraft (NDARC) vehicle sizing tool and the Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics II (CAMRAD II) analysis tool into OpenMDAO-driven optimizations. Both of these tools use detailed, file-based inputs and outputs, so RCOTOOLS provides software wrappers to update input files with new design variable values, execute these codes and then extract specific response variable values from the file outputs. These wrappers are designed to be flexible and easy to use. RCOTOOLS also provides several utilities to aid in optimization model development, including Graphical User Interface (GUI) tools for browsing input and output files in order to identify text strings that are used to identify specific variables as optimization input and response variables. This paper provides an overview of RCOTOOLS and its use

KSC00pp0421

NASA Image and Video Library

2000-03-29

The second stage of an Atlas II/Centaur rocket arrives on pad 36-A, Cape Canaveral Air Force Station, for mating with the first stage. Atlas II is designed to launch payloads into low earth orbit, geosynchronous transfer orbit or geosynchronous orbit. The rocket is the launch vehicle for the GOES-L satellite, part of the NOAA National Weather Service system in weather imagery and atmospheric sounding information. The primary objective of the GOES-L is to provide a full capability satellite in an on-orbit storage condition, to assure NOAA continuity in services from a two-satellite constellation. Launch services are being provided by the 45th Space Wing

KSC-00pp0412

NASA Image and Video Library

2000-03-27

Workers at Cape Canaveral Air Force Station prepare to erect the first stage of an Atlas II/Centaur rocket in the launch gantry on pad 36A. Atlas II is designed to launch payloads into low earth orbit, geosynchronous transfer orbit or geosynchronous orbit. The rocket is the launch vehicle for the NASA/Lockheed Martin GOES-L satellite, part of the NOAA National Weather Service system in weather imagery and atmospheric sounding information. The primary objective of the GOES-L is to provide a full capability satellite in an on-orbit storage condition, to assure NOAA continuity in services from a two-satellite constellation. Launch services are being provided by the 45th Space Wing

KSC-00pp0417

NASA Image and Video Library

2000-03-27

The first stage of an Atlas II/Centaur rocket stands erect in the launch gantry on pad 36A, Cape Canaveral Air Force Station. Atlas II is designed to launch payloads into low earth orbit, geosynchronous transfer orbit or geosynchronous orbit. The rocket is the launch vehicle for the NASA/Lockheed Martin GOES-L satellite, part of the NOAA National Weather Service system in weather imagery and atmospheric sounding information. The primary objective of the GOES-L is to provide a full capability satellite in an on-orbit storage condition, to assure NOAA continuity in services from a two-satellite constellation. Launch services are being provided by the 45th Space Wing

KSC-00pp0421

NASA Image and Video Library

2000-03-29

The second stage of an Atlas II/Centaur rocket arrives on pad 36-A, Cape Canaveral Air Force Station, for mating with the first stage. Atlas II is designed to launch payloads into low earth orbit, geosynchronous transfer orbit or geosynchronous orbit. The rocket is the launch vehicle for the GOES-L satellite, part of the NOAA National Weather Service system in weather imagery and atmospheric sounding information. The primary objective of the GOES-L is to provide a full capability satellite in an on-orbit storage condition, to assure NOAA continuity in services from a two-satellite constellation. Launch services are being provided by the 45th Space Wing

KSC00pp0416

NASA Image and Video Library

2000-03-27

At Cape Canaveral Air Force Station, the first stage of an Atlas II/Centaur rocket is nearing erection in the launch gantry on pad 36A. Atlas II is designed to launch payloads into low earth orbit, geosynchronous transfer orbit or geosynchronous orbit. The rocket is the launch vehicle for the NASA/Lockheed Martin GOES-L satellite, part of the NOAA National Weather Service system in weather imagery and atmospheric sounding information. The primary objective of the GOES-L is to provide a full capability satellite in an on-orbit storage condition, to assure NOAA continuity in services from a two-satellite constellation. Launch services are being provided by the 45th Space Wing