Accidental strangulation of a mentally retarded patient by a clothing collar: a case report.

PubMed

Hitosugi, Masahito; Yokoyama, Tomoko; Kido, Masahito; Kawato, Hitoshi; Matsushima, Kazumi; Nagai, Toshiaki; Tokudome, Shogo

2006-07-01

A 40-year-old mentally retarded woman died of accidental strangulation in a nursing home. She was found in a kneeling position with her hands on her knees and the collar of her clothing compressing the front and sides of the neck. Before the accident, a nurse had dressed the patient in one-piece overall-style pyjamas put on back to front so that she could not remove the garment herself. The post-mortem findings and reconstruction of the scene of death suggested that the patient had been strangled by the collar of her backward-facing clothing while in a kneeling position. Because patients with psychiatric illnesses may have a limited ability to recognize or communicate symptoms of physical danger, they must be closely monitored by knowledgeable medical and nursing staff. This case highlights the importance of preventing the accidental deaths of mentally retarded patients in nursing homes.

Method for isolating two aquifers in a single borehole

DOEpatents

Burklund, P.W.

1984-01-20

A method for isolating and individually instrumenting separate aquifers within a single borehole is disclosed. A borehole is first drilled from the ground surface, through an upper aquifer, and into a separating confining bed. A casing, having upper and lower sections separated by a coupling collar, is lowered into the borehole. The borehole is grouted in the vicinity of the lower section of the casing. A borehole is then drilled through the grout plug and into a lower aquifer. After the lower aquifer is instrumented, the borehole is grouted back into the lower portion of the casing. Then the upper section of the casing is unscrewed via the coupling collar and removed from the borehole. Finally, instrumentation is added to the upper aquifer and the borehole is appropriately grouted. The coupling collar is designed to have upper right-hand screw threads and lower left-hand screw thread, whereby the sections of the casing can be readily separated.

Method for isolating two aquifers in a single borehole

DOEpatents

Burklund, Patrick W.

1985-10-22

A method for isolating and individually instrumenting separate aquifers within a single borehole. A borehole is first drilled from the ground surface, through an upper aquifer, and into a separating confining bed. A casing, having upper and lower sections separated by a coupling collar, is lowered into the borehole. The borehole is grouted in the vicinity of the lower section of the casing. A borehole is then drilled through the grout plug and into a lower aquifer. After the lower aquifer is instrumented, the borehole is grouted back into the lower portion of the casing. Then the upper section of the casing is unscrewed via the coupling collar and removed from the borehole. Finally, instrumentation is added to the upper aquifer and the borehole is appropriately grouted. The coupling collar is designed to have upper right-hand screw threads and lower left-hand screw thread, whereby the sections of the casing can be readily separated.

The role of psychological distress and personality in the incidence of sciatic pain among working men.

PubMed Central

Pietri-Taleb, F; Riihimäki, H; Viikari-Juntura, E; Lindström, K; Moneta, G B

1995-01-01

OBJECTIVES. The role of personality characteristics and psychological distress in the incidence of sciatic pain was investigated in a 3-year prospective study. METHODS. The study population consisted of 1149 Finnish men aged 25 through 49 years (387 machine operators, 336 carpenters, and 426 office workers) with no history of sciatic pain at the beginning of follow-up. The psychological distress and personality characteristics were assessed by the Middlesex Hospital Questionnaire and the Maudsley Personality Inventory. RESULTS. The 3-year cumulative incidence rate for sciatic pain was 22% among the machine operators, 24% among the carpenters, and 14% among the office workers. The multivariate analysis of psychological factors, taking into account individual and occupational factors, showed that only hysteria was significantly associated with the incidence of sciatic pain among the blue-collar workers. Among the white-collar workers, none of the psychological dimensions were associated with sciatic pain. CONCLUSIONS. These results are in accordance with previous relationships found between hysteria and low-back disorders. Further follow-up investigations are needed to elucidate the role of psychological factors in the occurrence of back problems. PMID:7702119

Cervical Spine Collar Removal by Emergency Room Nurses: A Quality Improvement Project.

PubMed

Fontaine, Guillaume; Forgione, Massimo; Lusignan, Francis; Lanoue, Marc-André; Drouin, Simon

2018-05-01

The Canadian C-Spine Rule (CCR) is a clinical decision aid to facilitate the safe removal of cervical collars in the alert, orientated, low-risk adult trauma patient. Few health care settings have assessed initiatives to train charge nurses to use the CCR. This practice improvement project conducted in a secondary trauma center in Canada aimed to (1) train charge nurses of the emergency room to use the CCR, (2) monitor its use throughout the project period, and (3) compare the assessments of the charge nurses with those of emergency physicians. The project began with the creation of an interdisciplinary team. Clinical guidelines were established by the interdisciplinary project team. Nine charge nurses of the emergency room were then trained to use the CCR (3 on each 8-hour shift). The use of the CCR was monitored throughout the project period, from June 1 to October 5, 2016. The 3 aims of this practice improvement project were attained successfully. Over a 5-month period, 114 patients were assessed with the CCR. Charge nurses removed the cervical collars for 54 of 114 patients (47%). A perfect agreement rate (114 of 114 patients, 100%) was attained between the assessments of the nurses and those of physicians. This project shows that the charge nurses of a secondary trauma center can use the CCR safely on alert, orientated, and low-risk adult trauma patients as demonstrated by the agreement in the assessments of emergency room nurses and physicians. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

Blind Fastener Is Easy To Install

NASA Technical Reports Server (NTRS)

Peterson, S. A.

1982-01-01

Panels, sheets, doors and other structures could be easily attached to and removed from mating part by proposed new fastener. Fastener is permanently anchored in removable part only. Its protruding end is inserted into a hole in mating part. When wedge pin is screwed tightly closed, segmented collar contracts or expands to release parts or to grip them. Installation has no loose parts, and no rear nut is needed.

Radio telemetry for black-footed ferret research and monitoring

USGS Publications Warehouse

Biggins, Dean E.; Godbey, Jerry L.; Miller, Brian J.; Hanebury, Louis R.

2006-01-01

By 1973, radio telemetry was regarded as an important potential tool for studying the elusive, nocturnal, and semifossorial black-footed ferret (Mustela nigripes), but fears of using invasive techniques on this highly endangered mammal caused delays. We began radio collaring ferrets in 1981. Use of radio telemetry on ferrets proved to be both challenging and rewarding. We document two decades of development and use that led to the present radio-tagging techniques and methods for radio tracking. The 7-g radio collar commonly used after 1992 was smaller and lighter, relative to mass and size of subjects, than collars used in studies of other Mustela. Other important developments were a Teflon® coating to shed mud, a highly flexible stainless steel cable for whip antennas, and a nondurable wool collar. Although collar-caused neck abrasions have continued to occur sporadically, a retrospective assessment of minimum survival rates for 724 reintroduced ferrets (392 radio tagged), using data from spotlight surveys, failed to detect negative effects of radio-collars. In a South Dakota study, ferrets that were found to have hair loss or neck abrasions when collars were removed did not exhibit movements significantly different from those of radio-tagged ferrets with no evidence of neck problems. Prototype transmitters designed for surgical implantation had insufficient power output for effective use on ferrets. Early attempts at tracking radio-tagged ferrets by following the signal on foot quickly gave way to following movements by triangulation, which does not disturb the subjects. The most effective tracking stations were camper trailers fitted with rotatable, 11-element, dual-beam Yagi antennas on 6-m masts. We used radio telemetry to produce 83,275 lines of data (44,191 indications of status and 39,084 positional fixes via triangulation) for 340 radio-collared ferrets during the reintroduction program. Tracking by hand and from aircraft augmented triangulation, allowing us to locate animals that dispersed long distances and enabling us to determine causes of mortality. Justifying further use of radio telemetry on black-footed ferrets requires careful consideration of costs and benefits.

Remotely operated pipe connector

DOEpatents

Josefiak, Leonard J.; Cramer, Charles E.

1988-01-01

An apparatus for remotely assembling and disassembling a Graylock type coctor between a pipe and a closure for the pipe includes a base and a receptacle on the base for the closure. The pipe is moved into position vertically above the closure by a suitable positioning device such that the flange on the pipe is immediately adjacent and concentric with the flange on the closure. A moving device then moves two semicircular collars from a position free of the closure to a position such that the interior cam groove of each collar contacts the two flanges. Finally, a tensioning device automatically allows remote tightening and loosening of a nut and bolt assembly on each side of the collar to cause a seal ring located between the flanges to be compressed and to seal the closure. Release of the pipe and the connector is accomplished in the reverse order. Preferably, the nut and bolt assembly includes an elongate shaft portion on which a removable sleeve is located.

Evaluation and comparison of a flumethrin-imidacloprid collar and repeated monthly treatments of fipronil/(s)-methoprene to control flea, Ctenocephalides f. felis, infestations on cats for eight months.

PubMed

Dryden, Michael W; Smith, Vicki; Davis, Wendell L; Settje, Terry; Hostetler, Joe

2016-05-17

This controlled laboratory study was designed to evaluate the efficacy of the 10 % imidacloprid/4.5 % flumethrin collar (Seresto®, Bayer Animal Health) against fleas (Ctenocephalides f. felis) on cats, when compared to fipronil (9.8 %w/w)/(s)-methoprene (11.8 % w/w) topical spot-on formulation (Frontline® Plus for Cats and Kittens, Merial). Thirty cats were randomized into three groups of ten animals based on pre-treatment flea counts: Group 1: imidacloprid/flumethrin collar; Group 2: fipronil/(s)-methoprene topical spot-on and Group 3: non-treated controls. The imidacloprid/flumethrin collars were applied one time on Day 0, while the fipronil/(s)-methoprene spot-on was administered every 30 days from Day 0 through Day 210. Cats were infested with 100 fleas on study days 0, 7, 14, 29, 59, 89, 119, 149, 179, 209 and 239. All flea counts were conducted by combing to remove fleas on post-treatment days 2, 8, 15, 30, 60, 90, 120, 150, 180, 210 and 240. The efficacy of the imidacloprid/flumethrin collar ranged from 98.2 to 100 % for eight months. The efficacy of fipronil/(s)-methoprene spot-on ranged from 68.2 to 99.9 %. Efficacy was < 85 % for fipronil/(s)-methoprene on Days 90, 150 and 210. The flea counts in both treatment groups were significantly fewer than those in the non-treated control group at every post-treatment study day (P < 0.0001). In addition, there were significantly fewer fleas in the imidacloprid/flumethrin collar group when compared to the fipronil/(s)-methoprene group on Days 90, 150 and 210 (P < 0.0001). This study demonstrated that the imidacloprid/flumethrin collar (Seresto®, Bayer Animal Health) maintained excellent ( > 98.2 %) efficacy against fleas on cats for the entire 8 month study. Monthly applications of fipronil/(s)-methoprene (Frontline® Plus for Cats and Kittens, Merial) generally had high, but variable (68.2 to 99.9 %) efficacy over the course of the eight month study. Based on the very high residual efficacy achieved by the imidacloprid/flumethrin collar in this study, veterinarians should expect that this collar will control and eliminate existing flea infestations on cats and in their in-home premises as long as every flea infested host is treated.

The mass use of deltamethrin collars to control and prevent canine visceral leishmaniasis: A field effectiveness study in a highly endemic area.

PubMed

Leite, Bruna Martins Macedo; Solcà, Manuela da Silva; Santos, Liliane Celestino Sales; Coelho, Lívia Brito; Amorim, Leila Denise Alves Ferreira; Donato, Lucas Edel; Passos, Sandra Maria de Souza; Almeida, Adriana Oliveira de; Veras, Patrícia Sampaio Tavares; Fraga, Deborah Bittencourt Mothé

2018-05-01

Visceral leishmaniasis (VL) is a zoonosis of great importance. Limitations in current VL control measures compromise efficacy, indicating the need to implement new strategies. The aim of this study was to evaluate the effectiveness of the mass use of deltamethrin-impregnated collars in dogs as a public health measure to control and prevent canine visceral leishmaniasis (CVL). An interventional study was implemented in two endemic areas in the district of Monte Gordo (Bahia-Brazil): an intervention area, in which VL seronegative dogs were collared, and a control area in which only conventional CVL control measures were applied. At baseline, seropositive dogs were removed and seronegative dogs were included. Dogs were then reevaluated every 7-8 months for almost two years. At each time point, dogs in the intervention area that remained seronegative received new collars and newly identified seronegative dogs were included and collared. The local zoonosis control authorities were notified of any dogs that tested seropositive in both areas, which were subsequently marked for euthanasia as mandated by the Brazilian Ministry of Health. In the first serological survey, seroprevalence was similar in both areas. At the second evaluation, significant reductions in seroprevalence were seen in both areas, while seroprevalence in the intervention area reduced to 6.0% during the final evaluation versus an increase of 11.0% in the control area. This significant increase and the estimated relative risk (RR = 0.55) indicated protection against CVL in the intervention area. Although CVL incidence did not differ significantly between the areas, an increased tendency was observed in the control area, which could be due to low seroconversion rates throughout the study or a high loss to follow-up. Although our evaluation of the effectiveness of deltamethrin-impregnated collars as a community-wide public health control measure was inconclusive, this measure likely provides protection over time. In endemic areas of Brazil, this strategy represents an operational challenge for local zoonosis control authorities, indicating the need for adjustments, including improved collar design.

Controlling taphole depth in maple sap production research

Treesearch

Melvin R. Koelling; Barton M. Blum

1967-01-01

Because bark thickness of sugar maple trees varies considerably, the depth of tapholes for collecting maple sap should be varied accordingly to get the taphole depth that will produce the best sap flow. A system of removable collars on the drill bit is recommended as a means of regulating taphole depth in research studies.

Association between occupational clusters and allergic rhinitis in the Korean population: analysis of the Korean National Health and Nutrition Examination Survey data.

PubMed

Park, Sungjin; Kyun Jung, Pil; Choi, Myungsup; Seok, Hongdeok; Kim, Hansol; Oh, Sung-Soo; Koh, Sang-Baek

2018-05-09

This study aimed to investigate the association between occupational clusters and allergic rhinitis (AR). The study was based on data from the Korean National Health and Nutrition Examination Survey (KNHANES: 2007-2015). This study included 46,965 individuals: 20,491 men and 26,474 women. AR was defined as having been diagnosed by a physician. Occupations were classified according to occupational characteristics and skill levels into white (chief executives, senior officials, legislators, managers, professionals, and technicians), pink (clerks, clerical support workers, services and sales workers), blue (craft and related trades workers, drivers, plant and machine operators, assemblers, elementary occupation workers), and green (skilled agricultural, forestry, and fishery workers) categories. We calculated the odds ratios (ORs) and 95% confidence intervals (CIs) of AR according to the occupational clusters by using the chi-squared test and logistic regression. In the study population, 10.7% of the men and 13.5% of the women had AR. The prevalence of AR was highest among white-collar workers, followed by pink, blue, and green-collar workers. Compared to green-collar workers, among men the adjusted ORs of the blue, pink, and white-collar workers were 2.00 (95% CI 1.58-2.53), 2.46 (95% CI 1.91-3.15), and 2.78 (95% CI 2.20-3.51), respectively; and among women were 2.45 (95% CI 1.99-3.02), 2.64 (95% CI 2.15-3.25), and 3.63 (95% CI 2.96-4.47), respectively. This study suggests that AR prevalence is significantly associated with occupational clusters.

The Association between Osteoarthritis and Occupational Clusters in the Korean Population: A Nationwide Study.

PubMed

Seok, Hongdeok; Choi, Sung Jae; Yoon, Jin-Ha; Song, Gwan Gyu; Won, Jong-Uk; Kim, Jae-Hoon; Roh, Jaehoon; Jung, Jae Hyun

2017-01-01

Osteoarthritis (OA) is a considerable health problem worldwide. It is known to be associated with certain occupational risk factors. We examined the prevalence rate of OA by occupational cluster. Data were collected from the Korea National Health and Nutrition Examination Surveys (2010-2013). The total number of unweighted sample size was 9,905 participants: 4,460 men and 5,445 women, and OA prevalence was 5.3% and 18.4% respectively. OA patients were defined as participants with knee/hip joint pain and radiographic change of knee/hip joint. Occupational type was classified as either white, pink, blue, or green collar based on the occupational characteristics following physical demand: white for manager and professionals; pink for clerks and service/sales workers; blue for craft/trade workers, machine operators and assemblers, and elementary manual workers; and green for agricultural/fishery workers. We calculated the odds ratios (ORs) and 95% confidence intervals (95% CI) for the odds of a participant's having OA according to the occupational cluster, with gender stratification. The multiple logistic regression model showed that, compared to the white collar group, the ORs of the pink, blue, and green collar workers were 1.23 (95% CI 0.64-2.36), 1.85 (95% CI 1.18-2.88), and 2.91 (95% CI 1.86-4.54), respectively, in males, and 2.53 (95% CI 1.71-3.73), 2.86 (95% CI 1.94-4.21), and 3.90 (95% CI 2.60-5.83), respectively in females. The prevalence rate of OA was associated with the occupational cluster, in order from highest to lowest: green, blue, pink, and white collar.

Study on Gap Flow Field Simulation in Small Hole Machining of Ultrasonic Assisted EDM

NASA Astrophysics Data System (ADS)

Liu, Yu; Chang, Hao; Zhang, Wenchao; Ma, Fujian; Sha, Zhihua; Zhang, Shengfang

2017-12-01

When machining a small hole with high aspect ratio in EDM, it is hard for the flushing liquid entering the bottom gap and the debris could hardly be removed, which results in the accumulation of debris and affects the machining efficiency and machining accuracy. The assisted ultrasonic vibration can improve the removal of debris in the gap. Based on dynamics simulation software Fluent, a 3D model of debris movement in the gap flow field of EDM small hole machining assisted with side flushing and ultrasonic vibration is established in this paper. When depth to ratio is 3, the laws of different amplitudes and frequencies on debris distribution and removal are quantitatively analysed. The research results show that periodic ultrasonic vibration can promote the movement of debris, which is beneficial to the removal of debris in the machining gap. Compared to traditional small hole machining in EDM, the debris in the machining gap is greatly reduced, which ensures the stability of machining process and improves the machining efficiency.

Practical management of periprosthetic leakage in patients rehabilitated with a Provox® 2 voice prosthesis after total laryngectomy.

PubMed

Friedlander, Eviatar; Pinacho Martínez, Paloma; Poletti Serafini, Daniel; Martín-Oviedo, Carlos; Martínez Guirado, Tomás; Scola Yurrita, Bartolomé

Periprosthetic leakage of liquids is a common complication in patients rehabilitated with voice prostheses. Our objective was to describe and review the results of procedures for treating periprosthetic leakage. This was a retrospective analysis of 41 patients rehabilitated with Provox® 2 voice prostheses between 1997 and 2015. We describe 3 techniques: periprosthetic silicon collar placement, injection of hyaluronic acid into the tracheoesophageal wall and the combination of the 2 techniques. We present a method to reduce the diameter of the tracheoesophageal fistula by removing the voice prosthesis and placing a nasogastric tube through the fistula. In the 3 groups treated with silicone collar (n=5, 13 procedures), hyaluronic acid injection (n=5, 9 procedures) and the combination of both techniques (n=3, 5 procedures), we observed an increase in prosthesis lifespan of an average of 56 days (range 7-118 days), 32 days (range 3-55 days) and 63 days (range 28-136 days), respectively. The tracheoesophageal fistula diameter reduction was performed in 100% (n=6) of patients. The use of silicone collars, injection of hyaluronic acid into the tracheoesophageal wall and the combination of both techniques for the treatment of periprosthesis leakage increase the lifespan of the prosthesis. Temporary prosthesis removal and placement of nasogastric tube has also been shown effective in our experience. These techniques are simple, inexpensive and reproducible, thereby reducing healthcare costs. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Otorrinolaringología y Cirugía de Cabeza y Cuello. All rights reserved.

Nuclear reactor fuel assembly duct-tube-to-inlet-nozzle attachment system

DOEpatents

Christiansen, David W.; Smith, Bob G.

1982-01-01

A reusable system for removably attaching the lower end 21 of a nuclear reactor fuel assembly duct tube to an upper end 11 of a nuclear reactor fuel assembly inlet nozzle. The duct tube's lower end 21 has sides terminating in locking tabs 22 which end in inwardly-extending flanges 23. The flanges 23 engage recesses 13 in the top section 12 of the inlet nozzle's upper end 11. A retaining collar 30 slides over the inlet nozzle's upper end 11 to restrain the flanges 23 in the recesses 13. A locking nut 40 has an inside threaded portion 41 which engages an outside threaded portion 15 of the inlet nozzle's upper end 11 to secure the retaining collar 30 against protrusions 24 on the duct tube's sides.

Handbook on Air Cleaning Particulate Removal

DTIC Science & Technology

1952-09-01

Type D Rotoclone, another type of (Fig. 2.7) has an exit duct fitted with an centrifugal dust separator (Fig. 2.8), in- adjustable collar which controls ...8091 10,870 15,056 18.620 Cost/sq ft cloth area 3.26 4.80 1.80 2.42 1.68 2.08 aIntermittent operation bAutomatic -continuous operation hh PERFORMANCE

Satellite tracking and geospatial analysis of feral swine and their habitat use in Louisiana and Mississippi

USGS Publications Warehouse

Hartley, Stephen B.; Spear, Kathryn A.; Goatcher, Buddy L.

2012-01-01

Feral swine (Sus scrofa) is an invasive species that was first introduced to the continental United States in the 1500s by European explorers. Also known as feral hogs or feral pigs, the animals typically weigh about 200 pounds (up to 400 pounds), have characteristic tusks up to 3 inches long, are territorial, and live in groups, except for the boars, who are solitary and typically interact with sows only to breed. They have an average litter size of 5-6 piglets and occasionally two litters per year, and because they have few natural predators, survival of their young can be nearly 100 percent. Because of the detrimental impacts of this invasive species---including rooting, damaging agricultural lands, competing for food with and destroying the habitats of native animals, and spreading diseases and parasites---many public lands implement feral swine control programs on an annual basis. This activity is not enough to control or prevent an increase in swine populations, however, because of their distribution beyond the boundaries of public lands. Currently, little is known about feral swine populations, their habitat use and movement patterns, and the resulting habitat destruction in Louisiana and Mississippi. To abate this lack of knowledge, researchers at the U.S. Geological Survey National Wetlands Research Center (NWRC)---in cooperation with the U.S. Fish and Wildlife Service, the Louisiana Department of Wildlife and Fisheries, and several large landholding companies---are using collars equipped with Global Positioning System (GPS) receivers to track feral swine in Louisiana and Mississippi to examine population movement patterns, document destruction of habitat and wildlife, and help increase and facilitate removal. The NWRC researchers are using the "Judas pig" system of attaching GPS-satellite telemetry collars to select feral swine to (1) track movement patterns on the landscape, (2) document habitat destruction and effects on native wildlife, and (3) improve removal rates. Once a collar has been attached to an individual, usually a large boar or sow, it is released and returns to its group. The group's movements and locations can then be tracked through the movement of the collared individual, the "Judas pig," allowing researchers and managers to better target removal efforts. The use of GPS telemetry will allow the NWRC researchers to monitor feral swine movements daily. The results of this research will provide natural resource managers with more information for managing and responding to the impacts of this invasive species.

An integrated approach towards future ballistic neck protection materials selection.

PubMed

Breeze, John; Helliker, Mark; Carr, Debra J

2013-05-01

Ballistic protection for the neck has historically taken the form of collars attached to the ballistic vest (removable or fixed), but other approaches, including the development of prototypes incorporating ballistic material into the collar of an under body armour shirt, are now being investigated. Current neck collars incorporate the same ballistic protective fabrics as the soft armour of the remaining vest, reflecting how ballistic protective performance alone has historically been perceived as the most important property for neck protection. However, the neck has fundamental differences from the thorax in terms of anatomical vulnerability, flexibility and equipment integration, necessitating a separate solution from the thorax in terms of optimal materials selection. An integrated approach towards the selection of the most appropriate combination of materials to be used for each of the two potential designs of future neck protection has been developed. This approach requires evaluation of the properties of each potential material in addition to ballistic performance alone, including flexibility, mass, wear resistance and thermal burden. The aim of this article is to provide readers with an overview of this integrated approach towards ballistic materials selection and an update of its current progress in the development of future ballistic neck protection.

50 CFR Table 1a to Part 679 - Delivery Condition* and Product Codes

Code of Federal Regulations, 2012 CFR

2012-10-01

... (includes offsite production) DO NOT RECORD ON PTR 42 Bones (if meal, report as 32) (ancillary only) 39... body behind head and in front of tail 21 Fish meal. Meal from whole fish or fish parts; includes bone..., with roe 06 Headed and gutted, Western cut. Head removed just in front of the collar bone, and viscera...

50 CFR Table 1a to Part 679 - Delivery Condition* and Product Codes

Code of Federal Regulations, 2013 CFR

2013-10-01

... (includes offsite production) DO NOT RECORD ON PTR 42 Bones (if meal, report as 32) (ancillary only) 39... body behind head and in front of tail 21 Fish meal. Meal from whole fish or fish parts; includes bone..., with roe 06 Headed and gutted, Western cut. Head removed just in front of the collar bone, and viscera...

50 CFR Table 1a to Part 679 - Delivery Condition* and Product Codes

Code of Federal Regulations, 2014 CFR

2014-10-01

... (includes offsite production) DO NOT RECORD ON PTR 42 Bones (if meal, report as 32) (ancillary only) 39... body behind head and in front of tail 21 Fish meal. Meal from whole fish or fish parts; includes bone..., with roe 06 Headed and gutted, Western cut. Head removed just in front of the collar bone, and viscera...

50 CFR Table 1a to Part 679 - Delivery Condition* and Product Codes

Code of Federal Regulations, 2011 CFR

2011-10-01

... (includes offsite production) DO NOT RECORD ON PTR 42 Bones (if meal, report as 32) (ancillary only) 39... body behind head and in front of tail 21 Fish meal. Meal from whole fish or fish parts; includes bone..., with roe 06 Headed and gutted, Western cut. Head removed just in front of the collar bone, and viscera...

Numerical study of the collar wave characteristics and the effects of grooves in acoustic logging while drilling

NASA Astrophysics Data System (ADS)

Yang, Yufeng; Guan, Wei; Hu, Hengshan; Xu, Minqiang

2017-05-01

Large-amplitude collar wave covering formation signals is still a tough problem in acoustic logging-while-drilling (LWD) measurements. In this study, we investigate the propagation and energy radiation characteristics of the monopole collar wave and the effects of grooves on reducing the interference to formation waves by finite-difference calculations. We found that the collar wave radiates significant energy into the formation by comparing the waveforms between a collar within an infinite fluid, and the acoustic LWD in different formations with either an intact or a truncated collar. The collar wave recorded on the outer surface of the collar consists of the outward-radiated energy direct from the collar (direct collar wave) and that reflected back from the borehole wall (reflected collar wave). All these indicate that the significant effects of the borehole-formation structure on collar wave were underestimated in previous studies. From the simulations of acoustic LWD with a grooved collar, we found that grooves broaden the frequency region of low collar-wave excitation and attenuate most of the energy of the interference waves by multireflections. However, grooves extend the duration of the collar wave and convert part of the collar-wave energy originally kept in the collar into long-duration Stoneley wave. Interior grooves are preferable to exterior ones because both the low-frequency and the high-frequency parts of the collar wave can be reduced and the converted inner Stoneley wave is relatively difficult to be recorded on the outer surface of the collar. Deeper grooves weaken the collar wave more greatly, but they result in larger converted Stoneley wave especially for the exterior ones. The interference waves, not only the direct collar wave but also the reflected collar wave and the converted Stoneley waves, should be overall considered for tool design.

16 CFR Appendix A to Part 423 - Glossary of Standard Terms

Code of Federal Regulations, 2014 CFR

2014-01-01

... Standard Terms 1. Washing, Machine Methods: a. “Machine wash”—a process by which soil may be removed from.... “Hand wash”—a process by which soil may be manually removed from products or specimens through the use...”—a process by which soil may be removed from products or specimens in a machine which uses any common...

16 CFR Appendix A to Part 423 - Glossary of Standard Terms

Code of Federal Regulations, 2010 CFR

2010-01-01

... Standard Terms 1. Washing, Machine Methods: a. “Machine wash”—a process by which soil may be removed from.... “Hand wash”—a process by which soil may be manually removed from products or specimens through the use...”—a process by which soil may be removed from products or specimens in a machine which uses any common...

16 CFR Appendix A to Part 423 - Glossary of Standard Terms

Code of Federal Regulations, 2012 CFR

2012-01-01

... Standard Terms 1. Washing, Machine Methods: a. “Machine wash”—a process by which soil may be removed from.... “Hand wash”—a process by which soil may be manually removed from products or specimens through the use...”—a process by which soil may be removed from products or specimens in a machine which uses any common...

16 CFR Appendix A to Part 423 - Glossary of Standard Terms

Code of Federal Regulations, 2011 CFR

2011-01-01

... Standard Terms 1. Washing, Machine Methods: a. “Machine wash”—a process by which soil may be removed from.... “Hand wash”—a process by which soil may be manually removed from products or specimens through the use...”—a process by which soil may be removed from products or specimens in a machine which uses any common...

16 CFR Appendix A to Part 423 - Glossary of Standard Terms

Code of Federal Regulations, 2013 CFR

2013-01-01

... Standard Terms 1. Washing, Machine Methods: a. “Machine wash”—a process by which soil may be removed from.... “Hand wash”—a process by which soil may be manually removed from products or specimens through the use...”—a process by which soil may be removed from products or specimens in a machine which uses any common...

29 CFR 1910.261 - Pulp, paper, and paperboard mills.

Code of Federal Regulations, 2014 CFR

2014-07-01

... of the collar with which an operator's hand comes in contact shall be beveled to remove all sharp... Industrial Lighting, A11.1—1965 (R-1970). (ii) Scheme for the Identification of Piping Systems, A13.1—1956... (Inspector's Manual), A17.2—1960, including Suppelements A17.2a—1965 and A17.2b—1967. (v) Safety Code for...

29 CFR 1910.261 - Pulp, paper, and paperboard mills.

Code of Federal Regulations, 2012 CFR

2012-07-01

... of the collar with which an operator's hand comes in contact shall be beveled to remove all sharp... Industrial Lighting, A11.1—1965 (R-1970). (ii) Scheme for the Identification of Piping Systems, A13.1—1956... (Inspector's Manual), A17.2—1960, including Suppelements A17.2a—1965 and A17.2b—1967. (v) Safety Code for...

Internal defects associated with pruned and nonpruned branch stubs in black walnut

Treesearch

Alex L. Shigo; E. Allen, Jr. McGinnes; David T. Funk; Nelson Rogers

1979-01-01

Dissections of 50 branch stubs from seven black walnut trees revealed that some discolored wood was associated with all stubs, and that ring shakes and dark bands of discolored wood were associated with 14 of 17 stubs that were "flush cut" (branch collar removed) 13 years earlier while they were living or dead. Ring shakes formed along the barrier zone...

ELF-MF Occupational Exposure in Die-casting and Electroplating Workers in Korea.

PubMed

Rajitha Kawshalya, Mailan Arachchige Don; Jung, Joon-Sig; Lee, Yun-Jin; Hong, Seung-Cheol

2018-04-26

A 24-h exposure assessment was performed in two groups of blue-collar workers from a die-casting and an electroplating plant to investigate levels of exposure to extremely low-frequency magnetic fields (ELF-MF), using EMDEX Lite. ELF-MF exposure of workers from the die-casting plant AM±SD (AM=arithmetic mean, SD=standard deviation) (0.649±1.343µT)] is higher than in electroplating workers (0.138±0.045µT). Higher ELF-MF exposure was found among workers living in same building as their workplace compared to that among other workers. This study suggests that ELF-MF exposure levels should be taken into consideration when providing dormitories for workers to minimize the levels of residential ELF-MF exposure due to emission from plants. The study recommends that blue-collar workers should be made aware of measures to minimize their exposure to environmental agents such as ELF-MF and electromagnetic field (EMF) during work, such as maintaining a safe distance between machines and avoiding undesirable behavior with equipment.

Investigations of Effect of Rotary EDM Electrode on Machining Performance of Al6061 Alloy

NASA Astrophysics Data System (ADS)

Robinson Smart, D. S.; Jenish Smart, Joses; Periasamy, C.; Ratna Kumar, P. S. Samuel

2018-04-01

Electric Discharge Machining is an essential process which is being used for machining desired shape using electrical discharges which creates sparks. There will be electrodes subjected to electric voltage and which are separated by a dielectric liquid. Removing of material will be due to the continuous and rapid current discharges between two electrodes.. The spark is very carefully controlled and localized so that it only affects the surface of the material. Usually in order to prevent the defects which are arising due to the conventional machining, the Electric Discharge Machining (EDM) machining is preferred. Also intricate and complicated shapes can be machined effectively by use of Electric Discharge Machining (EDM). The EDM process usually does not affect the heat treat below the surface. This research work focus on the design and fabrication of rotary EDM tool for machining Al6061alloy and investigation of effect of rotary tool on surface finish, material removal rate and tool wear rate. Also the effect of machining parameters of EDM such as pulse on & off time, current on material Removal Rate (MRR), Surface Roughness (SR) and Electrode wear rate (EWR) have studied. Al6061 alloy can be used for marine and offshore applications by reinforcing some other elements. The investigations have revealed that MRR (material removal rate), surface roughness (Ra) have been improved with the reduction in the tool wear rate (TWR) when the tool is rotating instead of stationary. It was clear that as rotary speed of the tool is increasing the material removal rate is increasing with the reduction of surface finish and tool wear rate.

49 CFR 236.326 - Mechanical locking removed or disarranged; requirement for permitting train movements through...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Mechanical locking removed or disarranged... § 236.326 Mechanical locking removed or disarranged; requirement for permitting train movements through interlocking. When mechanical locking of interlocking machine is being changed or is removed from the machine...

Field comparison of tolerance of a collar containing 10.0% imidacloprid/4.5% flumethrin (Seresto) and a placebo collar placed on cats.

PubMed

Fink, Heidi; Wennogle, Sara; Davis, Wendell L; Von Simson, Cristiano; Lappin, Michael R

2016-12-01

A collar containing 10.0% imidacloprid/4.5% flumethrin (Seresto; Bayer Animal Health) controls flea and tick infestations for 8 months and is effective in preventing transmission of Bartonella henselae and Cytauxzoon felis among cats. The purpose of this study was to compare tolerance of client-owned cats for the 10.0% imidacloprid/4.5% flumethrin collar or a physically identical placebo collar. A total of 96 client-owned cats were enrolled in the study. Cats that were systemically ill, of hairless breed or declawed in all four limbs were excluded. Cats were randomized by household to wear a placebo collar for 14 days followed by the 10.0% imidacloprid/4.5% flumethrin collar for 14 days or the 10.0% imidacloprid/4.5% flumethrin collar for 28 days. Examinations by a veterinarian were performed on days 0, 14 and 28. Owners recorded daily systemic and local health observations. All but two cats, including one that entrapped the mandible in the collar and one that developed local pyodermatitis (10.0% imidacloprid/4.5% flumethrin collar), completed the 28 day study. The majority of the local lesions or licking associated with the collars occurred in the first 14 days, and licking (but not skin lesions) was more common in cats wearing the 10.0% imidacloprid/4.5% flumethrin collars. No local lesions were reported for placebo cats after switching to the 10.0% imidacloprid/4.5% flumethrin collar, and only one cat wearing the 10.0% imidacloprid/4.5% flumethrin collar had reports of licking after day 14. Housing status, single or multiple cat household, and whether a collar had been worn previously were not associated with side effects. Adverse events detected for cats wearing 10.0% imidacloprid/4.5% flumethrin collars were similar to those for cats wearing placebo collars and to cats wearing identification collars in a separate study. The data suggest that most cats originally intolerant of collars become receptive over time. © The Author(s) 2015.

The Effect of Soft and Rigid Cervical Collars on Head and Neck Immobilization in Healthy Subjects.

PubMed

Barati, Kourosh; Arazpour, Mokhtar; Vameghi, Roshanak; Abdoli, Ali; Farmani, Farzad

2017-06-01

Whiplash injury is a prevalent and often destructive injury of the cervical column, which can lead to serious neck pain. Many approaches have been suggested for the treatment of whiplash injury, including anti-inflammatory drugs, manipulation, supervised exercise, and cervical collars. Cervical collars are generally divided into two groups: soft and rigid collars. The present study aimed to compare the effect of soft and rigid cervical collars on immobilizing head and neck motion. Many studies have investigated the effect of collars on neck motion. Rigid collars have been shown to provide more immobilization in the sagittal and transverse planes compared with soft collars. However, according to some studies, soft and rigid collars provide the same range of motion in the frontal plane. Twenty-nine healthy subjects aged 18-26 participated in this study. Data were collected using a three-dimensional motion analysis system and six infrared cameras. Eight markers, weighing 4.4 g and thickened 2 cm 2 were used to record kinematic data. According to the normality of the data, a paired t -test was used for statistical analyses. The level of significance was set at α=0.01. All motion significantly decreased when subjects used soft collars ( p <0.01). According to the obtained data, flexion and lateral rotation experienced the maximum (39%) and minimum (11%) immobilization in all six motions using soft collars. Rigid collars caused maximum immobilization in flexion (59%) and minimum immobilization in the lateral rotation (18%) and limited all motion much more than the soft collar. This study showed that different cervical collars have different effects on neck motion. Rigid and soft cervical collars used in the present study limited the neck motion in both directions. Rigid collars contributed to significantly more immobilization in all directions.

Testing releasable GPS radiocollars on wolves and white-tailed deer

USGS Publications Warehouse

Merrill, Samuel B.; Adams, Layne G.; Nelson, Michael E.; Mech, L. David

1999-01-01

We tested prototype GPS collars on 8 free-ranging wolves (Canis lupus) and 3 white-tailed deer (Odocoileus virginianus) for varying periods between February and August 1997. We programmed the 920-gm collars to make a location attempt 6-96 times per day. The collars were designed to be remotely released from the animal and the data were then downloaded to a desktop computer. The collars produced 47-1,549 locations each during 11-41 days; locations were successful in 26-95% of the attempts (x̄ = 70%). Eight collars released successfully. Three collar-release failures were caused by condensation. Two collars had GPS antennas that were improperly attached and did not collect data. Life was as long as, or longer than, expected in 4 collars, less than expected in 5 collars, and unknown in 2 collars. Limitations of this type of collar include brief life if programmed at short location-attempt intervals (≤1 hr) and possible drop-off failure. Nevertheless, the large volume of data we collected with no field telemetry effort demonstrates the potential for this type of GPS collar to answer questions about movements of medium-sized mammals.

Funnel for fuel pin loading system

DOEpatents

Christiansen, D.W.; Steffen, J.M.; Brown, W.F.

1984-01-01

An enlarged funnel is described which is releasably mounted at the open end of a length of cladding by an encircling length of shrink tubing which securely engages outer surfaces of both the funnel and cladding. The shrink tubing overlaps an annular shoulder against which pulling force can be exerted to remove the tubing from the cladding. The shoulder can be provided on a separate collar or ring, or on the funnel itself.

Funnel for fuel pin loading system

DOEpatents

Christiansen, David W.; Steffen, Jim M.; Brown, William F.

1985-01-01

An enlarged funnel is releasably mounted at the open end of a length of cladding by an encircling length of shrink tubing which securely engages outer surfaces of both the funnel and cladding. The shrink tubing overlaps an annular shoulder against which pulling force can be exerted to remove the tubing from the cladding. The shoulder can be provided on a separate collar or ring, or on the funnel itself.

From white-collar crime to red-collar crime

PubMed Central

Brody, Richard G.; Kiehl, Kent A.

2014-01-01

Purpose The purpose of this paper is to explore the issue of violence with respect to white-collar criminals. Design/methodology/approach The analysis is conceptual, focusing on the historical underpinnings of white-collar crime and reviewing the evolution of white-collar criminals. Findings Findings suggest that white-collar criminals do display violent tendencies and, contrary to popular belief, can become dangerous individuals. Practical implications The paper represents an extremely useful and practical source for fraud examiners and other white-collar crime investigators. Raising the mvareness of investigators dealing with white-collar criminals may prevent them from becoming victims of a violent act. Originality/value The paper fulfills a need to highlight a dangerous trend with white-collar criminals in that they may be driven to violence against those involved in investigating their crimes. PMID:25414590

Effects of vitamin C treatment on collar-induced intimal thickening

PubMed Central

Arun, Mehmet Zuhuri; Üstünes, Levent; Sevin, Gülnur; Özer, Erdener

2015-01-01

Vitamin C has efficient antioxidant properties and is involved in important physiological processes such as collagen synthesis. As such, vitamin C deficiency leads to serious complications, including vascular diseases. The aim of this study was to investigate the effects of vitamin C treatment on collar-induced intimal thickening. Rabbits were fed a normocholesterolemic diet and a non-occlusive silicon collar was placed around the left carotid artery for 3, 7, and 14 days. The rabbits were treated with or without vitamin C (150 mg/kg/day). Collar-induced intimal thickening became apparent at day 7. The effect of the collar on intimal thickening was more prominent at day 14. Vitamin C treatment significantly inhibited collar-induced intimal thickening at day 14. The placement of the collar around the carotid artery decreased maximum contractile responses against contractile agents (KCl, phenylephrine, 5-hydroxytryptamine). The effect of the collar on contractile responses was enhanced as days elapsed. Decreased contractile responses of collared carotid arteries normalized at day 14 in the vitamin C treatment group. Vitamin C treatment also restored sensitivity to phenylephrine. The collar also significantly decreased acetylcholine-induced relaxations at day 3 and day 7. Acetylcholine-induced relaxations normalized in collared-arteries in the placebo group at day 14. Vitamin C treatment significantly increased acetylcholine-induced relaxations of both normal and collared carotid arteries at day 14. MMP-9 expression increased in collared arteries at day 3 and day 7 but did not change at day 14. MMP-2 expression increased in collared arteries at day 14. However, vitamin C treatment reduced collar-stimulated expression of MMP-2 at day 14. These findings indicate that vitamin C may have potentially beneficial effects on the early stages of atherosclerosis. Furthermore these results, for the first time, may indicate that vitamin C can also normalize decreased contractile response through perivascular collar placement. PMID:26719672

Collar spine models in the genus Echinostoma (Trematoda: Echinostomatidae).

PubMed

Kanev, Ivan; Fried, Bernard; Radev, Valentin

2009-10-01

This paper discusses collar spine arrangements in the genus Echinostoma. All arrangements are of uneven numbers of collar spines on the oral collar. The total number of collar spines in these arrangements ranges from a low 31 to a high 51. There are 11 models of collar spine arrangements in the Echinostoma consisting of spine numbers 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, and 51. Representative species with these collar spine arrangements are given in the article. The number of collar spines in a species is identical in both the larval and adult forms. Reports of even numbered spine counts in the genus Echinostoma are erroneous and probably reflect counts on worms with lost, retracted, or supernumerary spines.

Hazard Prevention Regarding Occupational Accidents Involving Blue-Collar Foreign Workers: A Perspective of Taiwanese Manpower Agencies

PubMed Central

Chang, Huan-Cheng; Wang, Mei-Chin; Liao, Hung-Chang; Cheng, Shu-Fang; Wang, Ya-huei

2016-01-01

Since 1989, blue-collar foreign workers have been permitted to work in Taiwanese industries. Most blue-collar foreign workers apply for jobs in Taiwan through blue-collar foreign workers’ agencies. Because blue-collar foreign workers are not familiar with the language and culture in Taiwan, in occupational accident education and hazard prevention, the agencies play an important role in the coordination and translation between employees and blue-collar foreign workers. The purpose of this study is to establish the agencies’ role in the occupational accidents education and hazard prevention for blue-collar foreign workers in Taiwan. This study uses a qualitative method—grounded theory—to collect, code, and analyze the data in order to understand the agencies’ role in occupational accident education and hazard prevention for blue-collar foreign workers in Taiwan. The results show that the duty of agencies in occupational accident education and hazard prevention includes selecting appropriate blue-collar foreign workers, communicating between employees and blue-collar foreign workers, collecting occupational safety and health information, assisting in the training of occupational safety and health, and helping blue-collar foreign workers adapt to their lives in Taiwan. Finally, this study suggests seven important points and discusses the implementation process necessary to improve governmental policies. The government and employees should pay attention to the education/training of occupational safety and health for blue-collar foreign workers to eliminate unsafe behavior in order to protect the lives of blue-collar foreign workers. PMID:27420085

Hazard Prevention Regarding Occupational Accidents Involving Blue-Collar Foreign Workers: A Perspective of Taiwanese Manpower Agencies.

PubMed

Chang, Huan-Cheng; Wang, Mei-Chin; Liao, Hung-Chang; Cheng, Shu-Fang; Wang, Ya-Huei

2016-07-13

Since 1989, blue-collar foreign workers have been permitted to work in Taiwanese industries. Most blue-collar foreign workers apply for jobs in Taiwan through blue-collar foreign workers' agencies. Because blue-collar foreign workers are not familiar with the language and culture in Taiwan, in occupational accident education and hazard prevention, the agencies play an important role in the coordination and translation between employees and blue-collar foreign workers. The purpose of this study is to establish the agencies' role in the occupational accidents education and hazard prevention for blue-collar foreign workers in Taiwan. This study uses a qualitative method-grounded theory-to collect, code, and analyze the data in order to understand the agencies' role in occupational accident education and hazard prevention for blue-collar foreign workers in Taiwan. The results show that the duty of agencies in occupational accident education and hazard prevention includes selecting appropriate blue-collar foreign workers, communicating between employees and blue-collar foreign workers, collecting occupational safety and health information, assisting in the training of occupational safety and health, and helping blue-collar foreign workers adapt to their lives in Taiwan. Finally, this study suggests seven important points and discusses the implementation process necessary to improve governmental policies. The government and employees should pay attention to the education/training of occupational safety and health for blue-collar foreign workers to eliminate unsafe behavior in order to protect the lives of blue-collar foreign workers.

Pneumatic soil removal tool

DOEpatents

Neuhaus, J.E.

1992-10-13

A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs.

Pneumatic soil removal tool

DOEpatents

Neuhaus, John E.

1992-01-01

A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw.

Manufacturing Gender Inequality in the New Economy: High School Training for Work in Blue-Collar Communities

PubMed Central

Sutton, April; Bosky, Amanda; Muller, Chandra

2016-01-01

Tensions between the demands of the knowledge-based economy and remaining, blue-collar jobs underlie renewed debates about whether schools should emphasize career and technical training or college-preparatory curricula. We add a gendered lens to this issue, given the male-dominated nature of blue-collar jobs and women’s greater returns to college. Using the ELS:2002, this study exploits spatial variation in school curricula and jobs to investigate local dynamics that shape gender stratification. Results suggest a link between high school training and jobs in blue-collar communities that structures patterns of gender inequality into early adulthood. Although high school training in blue-collar communities reduced both men’s and women’s odds of four-year college enrollment, it had gender-divergent labor market consequences. Men in blue-collar communities took more blue-collar courses, had higher rates of blue-collar employment, and earned similar wages relative to otherwise comparable men from non-blue-collar communities. Women were less likely to work and to be employed in professional occupations, and they suffered severe wage penalties relative to their male peers and women from non-blue-collar communities. These relationships were due partly to high schools in blue-collar communities offering more blue-collar and fewer advanced college-preparatory courses. This curricular tradeoff may benefit men, but it appears to disadvantage women. PMID:27818522

Manufacturing Gender Inequality in the New Economy: High School Training for Work in Blue-Collar Communities.

PubMed

Sutton, April; Bosky, Amanda; Muller, Chandra

2016-08-01

Tensions between the demands of the knowledge-based economy and remaining, blue-collar jobs underlie renewed debates about whether schools should emphasize career and technical training or college-preparatory curricula. We add a gendered lens to this issue, given the male-dominated nature of blue-collar jobs and women's greater returns to college. Using the ELS:2002, this study exploits spatial variation in school curricula and jobs to investigate local dynamics that shape gender stratification. Results suggest a link between high school training and jobs in blue-collar communities that structures patterns of gender inequality into early adulthood. Although high school training in blue-collar communities reduced both men's and women's odds of four-year college enrollment, it had gender-divergent labor market consequences. Men in blue-collar communities took more blue-collar courses, had higher rates of blue-collar employment, and earned similar wages relative to otherwise comparable men from non-blue-collar communities. Women were less likely to work and to be employed in professional occupations, and they suffered severe wage penalties relative to their male peers and women from non-blue-collar communities. These relationships were due partly to high schools in blue-collar communities offering more blue-collar and fewer advanced college-preparatory courses. This curricular tradeoff may benefit men, but it appears to disadvantage women.

30 CFR 77.1010 - Collaring holes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Collaring holes. 77.1010 Section 77.1010... Control § 77.1010 Collaring holes. (a) Starter steels shall be used when collaring holes with hand-held drills. (b) Men shall not hold the drill steel while collaring holes, or rest their hands on the chuck or...

30 CFR 77.1010 - Collaring holes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Collaring holes. 77.1010 Section 77.1010... Control § 77.1010 Collaring holes. (a) Starter steels shall be used when collaring holes with hand-held drills. (b) Men shall not hold the drill steel while collaring holes, or rest their hands on the chuck or...

30 CFR 77.1010 - Collaring holes.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Collaring holes. 77.1010 Section 77.1010... Control § 77.1010 Collaring holes. (a) Starter steels shall be used when collaring holes with hand-held drills. (b) Men shall not hold the drill steel while collaring holes, or rest their hands on the chuck or...

30 CFR 77.1010 - Collaring holes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Collaring holes. 77.1010 Section 77.1010... Control § 77.1010 Collaring holes. (a) Starter steels shall be used when collaring holes with hand-held drills. (b) Men shall not hold the drill steel while collaring holes, or rest their hands on the chuck or...

30 CFR 77.1010 - Collaring holes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Collaring holes. 77.1010 Section 77.1010... Control § 77.1010 Collaring holes. (a) Starter steels shall be used when collaring holes with hand-held drills. (b) Men shall not hold the drill steel while collaring holes, or rest their hands on the chuck or...

High speed machining of space shuttle external tank liquid hydrogen barrel panel

NASA Technical Reports Server (NTRS)

Hankins, J. D.

1983-01-01

Actual and projected optimum High Speed Machining data for producing shuttle external tank liquid hydrogen barrel panels of aluminum alloy 2219-T87 are reported. The data included various machining parameters; e.g., spindle speeds, cutting speed, table feed, chip load, metal removal rate, horsepower, cutting efficiency, cutter wear (lack of) and chip removal methods.

High speed machining of space shuttle external tank liquid hydrogen barrel panel

NASA Astrophysics Data System (ADS)

Hankins, J. D.

1983-11-01

Actual and projected optimum High Speed Machining data for producing shuttle external tank liquid hydrogen barrel panels of aluminum alloy 2219-T87 are reported. The data included various machining parameters; e.g., spindle speeds, cutting speed, table feed, chip load, metal removal rate, horsepower, cutting efficiency, cutter wear (lack of) and chip removal methods.

Incidence rates of surgically treated idiopathic carpal tunnel syndrome in blue- and white-collar workers and housewives in Tuscany, Italy

PubMed Central

Mattioli, S; Baldasseroni, A; Curti, S; Cooke, R M T; Mandes, A; Zanardi, F; Farioli, A; Buiatti, E; Campo, G; Violante, F S

2009-01-01

Objectives: Rates of surgically treated carpal tunnel syndrome (CTS) among blue- and white-collar workers and housewives in the general population were compared. Methods: Surgically treated cases of idiopathic CTS were investigated among 25–59-year-old residents of Tuscany, Italy, during 1997–2000, based on obligatory discharge records from all Italian public/private hospitals, archived according to residence on Tuscany’s regional database. Population data were extracted from the 2001 census. Results: After excluding repeat admissions, 8801 eligible cases were identified. Age-standardised rates (per 100 000 person-years) of surgical CTS were: “blue-collar women”, 367.8; “white-collar women”, 88.1; “housewives”, 334.5; “blue-collar men”, 73.5; and “white-collar men”, 15.3. Compared with reference categories (same-sex white-collar workers): female blue-collar workers experienced a 4.2-fold higher standardised rate; housewives, a 3.8-fold excess; and male blue-collar workers, a 4.8-fold excess (all p<0.001). Male and female blue-collar workers showed approximately three to sevenfold higher age-specific rates compared to their white-collar counterparts (all p<0.001). Housewives’ rates were similar to those of blue-collar female workers up to 40–44 years of age, after which they were significantly lower (p<0.002). At all ages, housewives’ rates were much higher (p<0.001) than those of white-collar women. Conclusions: Surgically treated CTS was three to seven times more common (depending on age/gender) in blue-collar than in white-collar workers, which is difficult to explain by differences in body weight or other individual factors. Thus, occupational risk factors seem relevant throughout working life. The high rates for full-time housewives suggest that domestic chores should be investigated as a possible risk factor for CTS. PMID:19254910

Wolves, Canis lupus, carry and cache the collars of radio-collared White-tailed Deer, Odocoileus virginianus, they killed

USGS Publications Warehouse

Nelson, Michael E.; Mech, L. David

2011-01-01

Wolves (Canis lupus) in northeastern Minnesota cached six radio-collars (four in winter, two in spring-summer) of 202 radio-collared White-tailed Deer (Odocoileus virginianus) they killed or consumed from 1975 to 2010. A Wolf bedded on top of one collar cached in snow. We found one collar each at a Wolf den and Wolf rendezvous site, 2.5 km and 0.5 km respectively, from each deer's previous locations.

Research on material removal accuracy analysis and correction of removal function during ion beam figuring

NASA Astrophysics Data System (ADS)

Wu, Weibin; Dai, Yifan; Zhou, Lin; Xu, Mingjin

2016-09-01

Material removal accuracy has a direct impact on the machining precision and efficiency of ion beam figuring. By analyzing the factors suppressing the improvement of material removal accuracy, we conclude that correcting the removal function deviation and reducing the removal material amount during each iterative process could help to improve material removal accuracy. Removal function correcting principle can effectively compensate removal function deviation between actual figuring and simulated processes, while experiments indicate that material removal accuracy decreases with a long machining time, so a small amount of removal material in each iterative process is suggested. However, more clamping and measuring steps will be introduced in this way, which will also generate machining errors and suppress the improvement of material removal accuracy. On this account, a free-measurement iterative process method is put forward to improve material removal accuracy and figuring efficiency by using less measuring and clamping steps. Finally, an experiment on a φ 100-mm Zerodur planar is preformed, which shows that, in similar figuring time, three free-measurement iterative processes could improve the material removal accuracy and the surface error convergence rate by 62.5% and 17.6%, respectively, compared with a single iterative process.

Automatic alkaloid removal system.

PubMed

Yahaya, Muhammad Rizuwan; Hj Razali, Mohd Hudzari; Abu Bakar, Che Abdullah; Ismail, Wan Ishak Wan; Muda, Wan Musa Wan; Mat, Nashriyah; Zakaria, Abd

2014-01-01

This alkaloid automated removal machine was developed at Instrumentation Laboratory, Universiti Sultan Zainal Abidin Malaysia that purposely for removing the alkaloid toxicity from Dioscorea hispida (DH) tuber. It is a poisonous plant where scientific study has shown that its tubers contain toxic alkaloid constituents, dioscorine. The tubers can only be consumed after it poisonous is removed. In this experiment, the tubers are needed to blend as powder form before inserting into machine basket. The user is need to push the START button on machine controller for switching the water pump ON by then creating turbulence wave of water in machine tank. The water will stop automatically by triggering the outlet solenoid valve. The powders of tubers are washed for 10 minutes while 1 liter of contaminated water due toxin mixture is flowing out. At this time, the controller will automatically triggered inlet solenoid valve and the new water will flow in machine tank until achieve the desire level that which determined by ultra sonic sensor. This process will repeated for 7 h and the positive result is achieved and shows it significant according to the several parameters of biological character ofpH, temperature, dissolve oxygen, turbidity, conductivity and fish survival rate or time. From that parameter, it also shows the positive result which is near or same with control water and assuming was made that the toxin is fully removed when the pH of DH powder is near with control water. For control water, the pH is about 5.3 while water from this experiment process is 6.0 and before run the machine the pH of contaminated water is about 3.8 which are too acid. This automated machine can save time for removing toxicity from DH compared with a traditional method while less observation of the user.

Material removal characteristics of orthogonal velocity polishing tool for efficient fabrication of CVD SiC mirror surfaces

NASA Astrophysics Data System (ADS)

Seo, Hyunju; Han, Jeong-Yeol; Kim, Sug-Whan; Seong, Sehyun; Yoon, Siyoung; Lee, Kyungmook; Lee, Haengbok

2015-09-01

Today, CVD SiC mirrors are readily available in the market. However, it is well known to the community that the key surface fabrication processes and, in particular, the material removal characteristics of the CVD SiC mirror surface varies sensitively depending on the shop floor polishing and figuring variables. We investigated the material removal characteristics of CVD SiC mirror surfaces using a new and patented polishing tool called orthogonal velocity tool (OVT) that employs two orthogonal velocity fields generated simultaneously during polishing and figuring machine runs. We built an in-house OVT machine and its operating principle allows for generation of pseudo Gaussian shapes of material removal from the target surface. The shapes are very similar to the tool influence functions (TIFs) of other polishing machine such as IRP series polishing machines from Zeeko. Using two CVD SiC mirrors of 150 mm in diameter and flat surface, we ran trial material removal experiments over the machine run parameter ranges from 12.901 to 25.867 psi in pressure, 0.086 m/sec to 0.147 m/sec in tool linear velocity, and 5 to 15 sec in dwell time. An in-house developed data analysis program was used to obtain a number of Gaussian shaped TIFs and the resulting material removal coefficient varies from 3.35 to 9.46 um/psi hour m/sec with the mean value to 5.90 ± 1.26(standard deviation). We report the technical details of the new OVT machine, of the data analysis program, of the experiments and the results together with the implications to the future development of the OVT machine and process for large CVD SiC mirror surfaces.

A beaded collar for dual micro GPS/VHF transmitter attachment to nutria

USGS Publications Warehouse

Haramis, G.M.; White, T.S.

2011-01-01

We report on the development of an approximately 85-g beaded collar for dual micro GPS/VHF transmitter attachment to semi-aquatic nutria (Myocastor coypus). Prototype collars were tested on captive nutria and refined during field trials. Central to the design was novel use of the VHF transmitter antenna as a collar. A circular collar was formed by passing the 44-cm antenna cable through a pre-made hole in the transmitter, leaving an approximately 16-cm upright antenna. GPS units were mounted separately via a hole in the base of each unit. For good satellite contact, GPS units (28 g) were maintained at the nape of the neck by counterbalance of the heavier VHF transmitters (50 g) positioned under the neck. To reduce friction, we lined the collar with alternate-sized plastic and, later, more durable nylon beads. The final collar configuration was worn for approximately 1 month deployments with only minor neck abrasion; one collar was worn successfully for 5 months. Foot entanglement remained the greatest risk of injury from the collar. By fitting collars tightly, we reduced the incidence of foot entanglement to 2 of 33 deployments (6%). Successful GPS tracks were acquired on 29 of 33 deployments (88%).

12. BUILDING 621, INTERIOR, GROUND FLOOR, LOOKING NORTHWEST AT SCREENING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. BUILDING 621, INTERIOR, GROUND FLOOR, LOOKING NORTHWEST AT SCREENING MACHINE THAT REMOVES SHELL FRAGMENTS. METALLIC DUST REMOVED BY MAGNETIC SEPERATOR UNDERNEATH SCREEN. SAWDUST IS RETURNED TO SAWDUST HOPPER BY ELEVATOR. HOODS OVER SCREENING MACHINE AT WORKBENCH REMOVE FINE SAWDUST. - Picatinny Arsenal, 600 Area, Test Areas District, State Route 15 near I-80, Dover, Morris County, NJ

Fix success and accuracy of GPS radio collars in old-growth temperate coniferous forests

USGS Publications Warehouse

Sager-Fradkin, Kimberly A.; Jenkins, Kurt J.; Hoffman, Robert L.; Happe, P.; Beecham, J.; Wright, R.G.

2007-01-01

Global Positioning System (GPS) telemetry is used extensively to study animal distribution and resource selection patterns but is susceptible to biases resulting from data omission and spatial inaccuracies. These data errors may cause misinterpretation of wildlife habitat selection or spatial use patterns. We used both stationary test collars and collared free-ranging American black bears (Ursus americanus) to quantify systemic data loss and location error of GPS telemetry in mountainous, old-growth temperate forests of Olympic National Park, Washington, USA. We developed predictive models of environmental factors that influence the probability of obtaining GPS locations and evaluated the ability of weighting factors derived from these models to mitigate data omission biases from collared bears. We also examined the effects of microhabitat on collar fix success rate and examined collar accuracy as related to elevation changes between successive fixes. The probability of collars successfully obtaining location fixes was positively associated with elevation and unobstructed satellite view and was negatively affected by the interaction of overstory canopy and satellite view. Test collars were 33% more successful at acquiring fixes than those on bears. Fix success rates of collared bears varied seasonally and diurnally. Application of weighting factors to individual collared bear fixes recouped only 6% of lost data and failed to reduce seasonal or diurnal variation in fix success, suggesting that variables not included in our model contributed to data loss. Test collars placed to mimic bear bedding sites received 16% fewer fixes than randomly placed collars, indicating that microhabitat selection may contribute to data loss for wildlife equipped with GPS collars. Horizontal collar errors of >800 m occurred when elevation changes between successive fixes were >400 m. We conclude that significant limitations remain in accounting for data loss and error inherent in using GPS telemetry in coniferous forest ecosystems and that, at present, resource selection patterns of large mammals derived from GPS telemetry should be interpreted cautiously.

Effect of hunter selectivity on harvest rates of radio-collared white-tailed deer in Pennsylvania

USGS Publications Warehouse

Buderman, Frances E.; Diefenbach, Duane R.; Rosenberry, C.S.; Wallingford, Bret D.; Long, Eric S.

2014-01-01

Radio transmitters are a commonly used tool for monitoring the fates of harvested species, although little research has been devoted to whether a visible radio transmitter changes a hunters' willingness to harvest that animal. We initially surveyed deer hunters to assess their willingness to harvest radio-collared deer and predicted radio collars were unlikely to affect the harvest of antlerless deer, but hunters may be less willing to harvest small-antlered males with radio collars compared to large-antlered males. We fitted white-tailed deer (Odocoileus virginianus) with radio collars that were visible to hunters or with ear-tag transmitters or ear-tags that were difficult to detect visually and estimated if harvest rates differed among marking methods. For females, the best model failed to detect an effect of radio collars on harvest rates. Also, we failed to detect a difference between male deer fitted with radio collars and ear-tag transmitters. When we compared males fitted with radio collars versus ear tags, we found harvest rate patterns were opposite to our predictions, with lower harvest rates for adult males fitted with radio collars and higher harvest rates for yearling males fitted with radio collars. Our study suggests that harvest rate estimates generated from a sample of deer fitted with visible radio collars can be representative of the population of inference. 

Health beliefs of blue collar workers. Increasing self efficacy and removing barriers.

PubMed

Wilson, S; Sisk, R J; Baldwin, K A

1997-05-01

The study compared the health beliefs of participants and non-participants in a blood pressure and cholesterol screening held at the worksite. A cross sectional, ex-post facto design was used. Questionnaires measuring health beliefs related to cardiac screening and prevention of cardiac problems were distributed to a convenience sample of 200 blue-collar workers in a large manufacturing plant in the Midwest. One hundred fifty-one (75.5%) completed questionnaires were returned, of which 45 had participated in cardiac worksite screening in the past month. A multivariate analysis of variance was used to analyze data. Participants perceived significantly fewer barriers to cardiac screening and scored significantly higher on self efficacy than non-participants. These findings concur with other studies identifying barriers and self efficacy as important predictors of health behavior. Occupational health nurses' efforts are warranted to reduce barriers and improve self efficacy by advertising screenings, scheduling them at convenient times and locations, assuring privacy, and keeping time inconvenience to a minimum.

Post clamp

NASA Technical Reports Server (NTRS)

Ramsey, John K. (Inventor); Meyn, Erwin H. (Inventor)

1990-01-01

A pair of spaced collars are mounted at right angles on a clamp body by retaining rings which enable the collars to rotate with respect to the clamp body. Mounting posts extend through aligned holes in the collars and clamp body. Each collar can be clamped onto the inserted post while the clamp body remains free to rotate about the post and collar. The clamp body is selectively clamped onto each post.

Electrorefiner

DOEpatents

Miller, W.E.; Tomczuk, Z.

1995-08-22

An apparatus is disclosed capable of functioning as a solid cathode and for removing crystalline structure from the upper surface of a liquid cathode, includes a metallic support vertically disposed with respect to an electrically insulating container capable of holding a liquid metal cathode. A piston of electrically insulating material mounted on the drive tube, surrounding the current lead, for vertical and rotational movement with respect thereto including a downwardly extending collar portion surrounding the metallic current lead. At least one portion of the piston remote from the metallic current lead being removed. Mechanism for lowering the piston to the surface of the liquid cathode and raising the piston from the surface along with mechanism for rotating the piston around its longitudinal axis. 5 figs.

Electrorefiner

DOEpatents

Miller, William E.; Tomczuk, Zygmunt

1995-01-01

An apparatus capable of functioning as a solid cathode and for removing crystalline structure from the upper surface of a liquid cathode, includes a metallic support vertically disposed with respect to an electrically insulating container capable of holding a liquid metal cathode. A piston of electrically insulating material mounted on the drive tube, surrounding the current lead, for vertical and rotational movement with respect thereto including a downwardly extending collar portion surrounding the metallic current lead. At least one portion of the piston remote from the metallic current lead being removed. Mechanism for lowering the piston to the surface of the liquid cathode and raising the piston from the surface along with mechanism for rotating the piston around its longitudinal axis.

Reversible micromachining locator

DOEpatents

Salzer, Leander J.; Foreman, Larry R.

1999-01-01

This invention provides a device which includes a locator, a kinematic mount positioned on a conventional tooling machine, a part carrier disposed on the locator and a retainer ring. The locator has disposed therein a plurality of steel balls, placed in an equidistant position circumferentially around the locator. The kinematic mount includes a plurality of magnets which are in registry with the steel balls on the locator. In operation, a blank part to be machined is placed between a surface of a locator and the retainer ring (fitting within the part carrier). When the locator (with a blank part to be machined) is coupled to the kinematic mount, the part is thus exposed for the desired machining process. Because the locator is removably attachable to the kinematic mount, it can easily be removed from the mount, reversed, and reinserted onto the mount for additional machining. Further, the locator can likewise be removed from the mount and placed onto another tooling machine having a properly aligned kinematic mount. Because of the unique design and use of magnetic forces of the present invention, positioning errors of less than 0.25 micrometer for each machining process can be achieved.

Extended cervico-thoracic metastasectomy for testicular non-seminomatous germ cell tumour masses through an inverse T and combined collar incision.

PubMed

Schweiger, Thomas; Hoetzenecker, Konrad; Taghavi, Shahrokh; Klepetko, Walter

2015-05-01

Non-seminomatous germ cell tumours (NSGCT) are the most common malignancy from testicular origin in young males. They are characterized by early formation of metastases along retroperitoneal and subsequent mediastinal lymph node stations. Following cisplatin-based induction chemotherapy, residual tumour masses should be removed surgically, although this implies the need for extended procedures. Such an approach can result in cure rates of over 70%. Herein, we report 2 cases of maximally extended surgery for metastatic malignant germ cell tumour of the testis. In both patients, diagnostic work-up revealed a NSGCT with retroperitoneal, mediastinal and cervical lymph node metastases. Multimodal protocols including induction chemotherapy and surgical removal of all primary and secondary tumour masses with curative intent were applied. An 'inverse T' incision in combination with a collar incision was chosen to approach the excessive supra-diaphragmatic tumour spread. This large-scaled surgical access offered an excellent exposure and allowed complete resection of all cervical and thoracic metastases in both patients. Abdominal tumour masses were resected through a standard median laparotomy. These 2 cases illustrate that complete tumour resection is feasible even in stages of NSGCT with generalized lymphatic spread. Metastasectomy should be offered to NSGCT patients despite the necessity of extended surgical approaches. © The Author 2014. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Organizational justice is related to heart rate variability in white-collar workers, but not in blue-collar workers-findings from a cross-sectional study.

PubMed

Herr, Raphael M; Bosch, Jos A; van Vianen, Annelies E M; Jarczok, Marc N; Thayer, Julian F; Li, Jian; Schmidt, Burkhard; Fischer, Joachim E; Loerbroks, Adrian

2015-06-01

Perceived injustice at work predicts coronary heart disease. Vagal dysregulation represents a potential psychobiological pathway. We examined associations between organizational justice and heart rate variability (HRV) indicators. Grounded in social exchange and psychological contract theory, we tested predictions that these associations are more pronounced among white-collar than among blue-collar workers. Cross-sectional data from 222 blue-collar and 179 white-collar men were used. Interactional and procedural justice were measured by questionnaire. Ambulatory HRV was assessed across 24 h. Standardized regression coefficients (β) were calculated. Among white-collar workers, interactional justice showed positive relationships with 24-h HRV, which were strongest during sleeping time (adjusted βs≥0.26; p values≤0.01). No associations were found for blue-collar workers. A comparable but attenuated pattern was observed for procedural justice. Both dimensions of organizational injustice were associated with lowered HRV among white-collar workers. The impact of justice and possibly its association with health seems to differ by occupational groups.

49 CFR 1242.28 - Roadway machines, small tools and supplies, and snow removal (accounts XX-19-36 to XX-19-38...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 9 2011-10-01 2011-10-01 false Roadway machines, small tools and supplies, and snow removal (accounts XX-19-36 to XX-19-38, inclusive). 1242.28 Section 1242.28 Transportation Other... PASSENGER SERVICE FOR RAILROADS 1 Operating Expenses-Way and Structures § 1242.28 Roadway machines, small...

Clinical evaluation of the stability of implants placed at different supracrestal levels.

PubMed

Gultekin, B Alper; Sirali, Ali; Gultekin, Pinar; Ersanli, Selim

2016-01-01

The aim of this study was to evaluate the stability during healing and before loading of implants placed at two different supracrestal levels according to their collar texture. This retrospective study included patients who received posterior implants with the same macro design. Implants with a machined collar were placed 0.3 mm above the crestal bone (M group), while those with a laser-microtextured collar were placed 1 mm above the crestal bone (L group). All implants healed in a single stage with healing abutments. Implant stability quotient (ISQ) values were determined using resonance frequency analysis immediately after implant placement during surgery and after 1, 4, 8, and 12 weeks after surgery. Other evaluated factors for stability included the implant diameter and length and the site of placement (maxilla or mandible). In total, 103 implants (47 L, 56 M) were evaluated. The median ISQ values at baseline and 1 week after placement were significantly higher for the M group than for the L group (p=0.006 and p=0.031, respectively). There were no differences at the subsequent observation points. The ISQ value was higher for wide-diameter than regular diameter (p=0.001) and mandibular implants than maxillary implants (p=0.001 at 0-8. weeks; p=0.012 at 12 weeks) at all observation points. When diameter data were neglected, the implant length did not influence the ISQ value at all observation points. Our results suggest that submerging implant more inside bone may only influence primary stability. Moreover, the implant diameter and site of placement influence primary and secondary stability before loading, whereas the implant length does not when its diameter is not accounted for.

Reducing local scouring at bridge piles using collars and geobags.

PubMed

Akib, Shatirah; Liana Mamat, Noor; Basser, Hossein; Jahangirzadeh, Afshin

2014-01-01

The present study examines the use of collars and geobags for reducing local scour around bridge piles. The efficiency of collars and geobags was studied experimentally. The data from the experiments were compared with data from earlier studies on the use of single piles with a collar and with a geobag. The results showed that using a combination of a steel collar and a geobag yields the most significant scour reduction for the front and rear piles, respectively. Moreover, the independent steel collar showed better efficiency than the independent geobag below the sediment level around the bridge piles.

Reducing Local Scouring at Bridge Piles Using Collars and Geobags

PubMed Central

Akib, Shatirah; Liana Mamat, Noor; Basser, Hossein; Jahangirzadeh, Afshin

2014-01-01

The present study examines the use of collars and geobags for reducing local scour around bridge piles. The efficiency of collars and geobags was studied experimentally. The data from the experiments were compared with data from earlier studies on the use of single piles with a collar and with a geobag. The results showed that using a combination of a steel collar and a geobag yields the most significant scour reduction for the front and rear piles, respectively. Moreover, the independent steel collar showed better efficiency than the independent geobag below the sediment level around the bridge piles. PMID:25247201

Subjective and Objective Cancer Screening Knowledge Among White- and Blue-Collar Chinese Midlife Adults.

PubMed

Hou, Su-I

2018-02-01

Cancer is the leading cause of death among Chinese, yet little is known about cancer knowledge among this population. The study described the subjective and objective cancer screening knowledge among white- versus blue-collar Chinese midlife adults. A convenient sample of white-collar adults age 40+ years was recruited from government and academic agencies; and blue-collar adults age 40+ years were recruited from manufactory companies in Taiwan. An eight-item cancer screening knowledge test (CSKT) was used to measure objective knowledge and one five-point Likert scale item for assessing subjective (perceived) cancer screening knowledge. A total of 208 white- and 533 blue-collar workers completed the survey during 2008-2011. Mean ages between groups were comparable (41.1 versus 46.3 years), as well as family cancer history (41.5 %). About 76 % of the white-collar and 43 % of the blue-collar adults had college education. The mean score of the CSKT was lower in the blue-collar versus white-collar workers, 5.4 (SD = 1.76) versus 6.1 (SD = 1.40), indicating on average, 68 versus 76 % of the participants answered the cancer knowledge correctly. The subjective knowledge levels were, however, higher among the blue-collar workers (mean rating of 3.22 versus 2.78). The CSKT showed a good mix of relatively easy and moderately difficult items in both groups. Study showed that overall cancer screening knowledge was low among Chinese midlife adults. Although blue-collar workers scored lower on CSKT, the perceived knowledge level was higher. Results also suggest attention to communicating cancer screening information among Chinese blue-collar midlife workers in particular.

Mortality patterns and detection bias from carcass data: An example from wolf recovery in Wisconsin

USGS Publications Warehouse

Stenglein, Jennifer L.; Van Deelen, Timothy R.; Wydeven, Adrian P.; Mladenoff, David J.; Wiedenhoft, Jane E.; Businga, Nancy K.; Langenberg, Julia A.; Thomas, Nancy J.; Heisey, Dennis M.

2015-01-01

We developed models and provide computer code to make carcass recovery data more useful to wildlife managers. With these tools, wildlife managers can understand the spatial, temporal (e.g., across time periods, seasons), and demographic patterns in mortality causes from carcass recovery datasets. From datasets of radio-collared and non-collared carcasses, managers can calculate the detection bias by mortality cause in a non-collared carcass dataset compared to a collared carcass dataset. As a first step, we provide a standard procedure to assign mortality causes to carcasses. We provide an example of these methods for radio-collared wolves (n = 208) and non-collared wolves (n = 668) found dead in Wisconsin (1979–2012). We analyzed differences in mortality cause relative to season, age and sex classes, wolf harvest zones, and recovery phase (1979–1995: initial recovery, 1996–2002: early growth, 2003–2012: late growth). Seasonally, illegal kills and natural deaths were proportionally higher in winter (Oct–Mar) than summer (Apr–Sep) for collared wolves, whereas vehicle strikes and legal kills were higher in summer than winter. Spatially, more illegally killed collared wolves occurred in eastern wolf harvest zones where wolves reestablished more slowly and in the central forest region where optimal habitat is isolated by agriculture. Natural mortalities of collared wolves (e.g., disease, intraspecific strife, or starvation) were highest in western wolf harvest zones where wolves established earlier and existed at higher densities. Calculating detection bias in the non-collared dataset revealed that more than half of the non-collared carcasses on the landscape are not found. The lowest detection probabilities for non-collared carcasses (0.113–0.176) occurred in winter for natural, illegal, and unknown mortality causes.

Influence of implant collar design on stress and strain distribution in the crestal compact bone: a three-dimensional finite element analysis.

PubMed

Shen, Wan-Ling; Chen, Chen-Sheng; Hsu, Ming-Lun

2010-01-01

To evaluate the influence of implant collar geometry on the distribution of stress and strain in the crestal compact bone contiguous to an implant collar for four types of bone under axial and oblique loads. Finite element models of threaded implants with three kinds of implant collar designs (divergent, straight, and convergent) with their corresponding suprastructures embedded in the posterior mandible were created with ANSYS software. Eight different test conditions incorporating four types of bone (orthotropic and effectively isotropic in part 1 and high and low densities in part 2) under separate 100-N axial and 35.6-degree oblique forces were created to investigate the stress and strain distributions in the crestal compact bone around the implant collars. In all eight conditions, the divergent collar demonstrated the lowest maximum von Mises and principal stresses and strains in the crestal compact bone contiguous to the implant collar, followed by the straight and convergent collars. The oblique load induced higher peak values than the axial load. The orthotropic design amplified and increased the pathologic microstrains and tensile stresses in the crestal compact bone compared to the effectively isotropic design, especially in models with a convergent collar design. In part 2 of the study, the maximum von Mises stresses and strains increased with a decrease in the cancellous bone density. Under oblique loading, the convergent and straight collars showed pathologic microstrain values as well as excessive ultimate tensile stresses in the orthotropic bone model with low-density cancellous bone. Within the limitations, it was concluded that stress and strain distributions in the adjacent compact bone are influenced by the implant collar design. The divergent implant collar design was associated with the lowest stress and strain concentrations in the crestal compact bone.

Health and pink-collar work.

PubMed

Basu, S; Ratcliffe, G; Green, M

2015-10-01

In recent years, there has been a decline in the manufacturing sector of the UK economy with a corresponding growth of service-orientated pink-collar jobs in some regions. While the health outcomes of white- and blue-collar workers are well-established, less is known about this emerging pink-collar group. To outline the health of pink-collar workers in comparison to their white-collar counterparts across a range of indicators. Area-level percentages for white-, pink- and blue-collar workers were derived from residents' routinely collected employment data in a northern English town. Area-level health data pertaining to male and female life expectancy, respiratory deaths and deaths from cardiovascular and circulatory causes (all age and under 75 years) were obtained from the local authority and public health observatory. Multivariate regression analyses were performed to assess relationships between job collar and health. When adjusted for deprivation, areas with higher percentages of pink-collar workers experienced lower rates of death from circulatory disease under the age of 75 in comparison to white-collar workers. Other relationships between collar status and health outcomes were not statistically significant. The reasons underlying the apparent protective effect of pink-collar status for deaths from circulatory disease are uncertain and merit further study. Possibilities include differences in age, exposure to occupational hazards and lifestyle behaviours. Our work has a number of limitations and longitudinal studies with detailed exposure data should assess the long-term health outcomes of these workers using agreed definitions. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

HEXPANDO Expanding Head for Fastener-Retention Hexagonal Wrench

NASA Technical Reports Server (NTRS)

Bishop, John

2011-01-01

The HEXPANDO is an expanding-head hexagonal wrench designed to retain fasteners and keep them from being dislodged from the tool. The tool is intended to remove or install socket-head cap screws (SHCSs) in remote, hard-to-reach locations or in circumstances when a dropped fastener could cause damage to delicate or sensitive hardware. It is not intended for application of torque. This tool is made of two assembled portions. The first portion of the tool comprises tubing, or a hollow shaft, at a length that gives the user adequate reach to the intended location. At one end of the tubing is the expanding hexagonal head fitting with six radial slits cut into it (one at each of the points of the hexagonal shape), and a small hole drilled axially through the center and the end opposite the hex is internally and externally threaded. This fitting is threaded into the shaft (via external threads) and staked or bonded so that it will not loosen. At the other end of the tubing is a knurled collar with a through hole into which the tubing is threaded. This knob is secured in place by a stop nut. The second assembled portion of the tool comprises a length of all thread or solid rod that is slightly longer than the steel tubing. One end has a slightly larger knurled collar affixed while the other end is tapered/pointed and threaded. When the two portions are assembled, the all thread/rod portion feeds through the tubing and is threaded into the expanding hex head fitting. The tapered point allows it to be driven into the through hole of the hex fitting. While holding the smaller collar on the shaft, the user turns the larger collar, and as the threads feed into the fitting, the hex head expands and grips the SHCS, thus providing a safe way to install and remove fasteners. The clamping force retaining the SHCS varies depending on how far the tapered end is inserted into the tool head. Initial tests of the prototype tool, designed for a 5 mm or # 10SHCS have resulted in up to 8 lb (.35.6 N) of pull force to dislodge the SHCS from the tool. The tool is designed with a lead-in angle from the diameter of the tubing to a diameter the same as the fastener head, to prevent the fastener head from catching on any obstructions encountered that could dislodge the fastener during retrieval.

In-field Calibration of a Fast Neutron Collar for the Measurement of Fresh PWR Fuel Assemblies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swinhoe, Martyn Thomas; De Baere, Paul

2015-04-17

A new neutron collar has been designed for the measurement of fresh LEU fuel assemblies. This collar uses “fast mode” measurement to reduce the effect of burnable poison rods on the assay and thus reduce the dependence on the operator’s declaration. The new collar design reduces effect of poison rods considerably. Instead of 12 pins of 5.2% Gd causing a 20.4% effect, as in the standard thermal mode collar, they only cause a 3.2% effect in the new collar. However it has higher efficiency so that reasonably precise measurements can be made in 25 minutes, rather than the 1 hourmore » of previous collars. The new collar is fully compatible with the use of the standard data collection and analysis code INCC. This report describes the calibration that was made with a mock-up assembly at Los Alamos National Laboratory and with actual assemblies at the AREVA Fuel fabrication Plant in Lingen, Germany.« less

Inflammatory reaction to fabric collars from percutaneous antennas attached to intracoelomic radio transmitters implanted in harlequin ducks (Histrionicus histrionicus)

USGS Publications Warehouse

Mulcahy, Daniel M.; Burek, K.A.; Esler, Daniel N.

2007-01-01

In wild birds implanted intracoelomically with radio transmitters, a synthetic fabric collar placed around the base of a percutaneous antenna is believed to function as a barrier to contamination of the coelom. We examined 13 fabric collars recovered from percutaneous antennas of radio transmitters implanted intracoelomically in harlequin ducks (Histrionicus histrionicus) 12 months earlier. Both the transmitters and antenna collars were encapsulated in fibrous connective tissue, with adhesions to internal organs. Histologically, bacteria were evident at the fabric-plastic interface in 8 of 10 collars examined in cross section and along the length of the collar in 3 collars examined longitudinally. Bacteria were confined within the fibrotic sheath surrounding the transmitter and the antenna collar in all birds. No evidence of chronic systemic effects secondary to implantation was present on hematologic or serum biochemical testing. These findings indicate that antenna collars do not prevent the entry of bacteria along the percutaneous antenna but may help stabilize the antenna and minimize coelomic contamination. We conclude that radio transmitters implanted into the coelom of harlequin ducks do not appear to cause significant health problems for at least 1 year after implantation.

Occupational contact dermatitis in blue-collar workers: results from a multicentre study from the Danish Contact Dermatitis Group (2003-2012).

PubMed

Schwensen, Jakob F; Menné, Torkil; Veien, Niels K; Funding, Anne T; Avnstorp, Christian; Østerballe, Morten; Andersen, Klaus E; Paulsen, Evy; Mørtz, Charlotte G; Sommerlund, Mette; Danielsen, Anne; Andersen, Bo L; Thormann, Jens; Kristensen, Ove; Kristensen, Berit; Vissing, Susanne; Nielsen, Niels H; Thyssen, Jacob P; Johansen, Jeanne D

2014-12-01

Blue-collar workers have a high risk of occupational contact dermatitis, but epidemiological studies are scarce. To investigate allergic contact dermatitis in blue-collar workers with dermatitis registered by the Danish Contact Dermatitis Group. A retrospective analysis of patch test data from 1471 blue-collar workers and 1471 matched controls tested between 2003 and 2012 was performed. A logistic regression was used to test for associations. The blue-collar workers often had occupational hand dermatitis (p < 0.001). Atopic dermatitis was less commonly observed among blue-collar workers (19.6%) than among controls (23.9%) (p = 0.005). Allergens with a statistically significant association with the occupational group of blue-collar workers were epoxy resins, methyldibromo glutaronitrile, 2-bromo-2-nitro-1,3-propanediol, potassium dichromate, and methylchloroisothiazolinone (MCI)/methylisothiazolinone (MI). The following occupations were additionally identified as risk factors for contact sensitization to MCI/MI and MI, epoxy resins, and potassium dichromate, respectively: painting, construction work, and tile setting/terrazzo work. Contact allergy is a major problem among blue-collar workers. The data indicate a healthy worker effect among blue-collar workers diagnosed with dermatitis, as blue-collar workers were diagnosed significantly less often with atopic dermatitis than were controls. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The impact of occupation according to income on depressive symptoms in South Korean individuals: Findings from the Korean Welfare Panel Study.

PubMed

Kim, Woorim; Park, Eun-Cheol; Lee, Tae-Hoon; Ju, Yeong Jun; Shin, Jaeyong; Lee, Sang Gyu

2016-05-01

In South Korea, societal perceptions on occupation are distinct, with people favouring white collar jobs. Hence both occupation type and income can have mental health effects. To examine the relationship between occupational classification and depression, along with the combined effect of occupational classification and household income. Data were from the Korean Welfare Panel Study (KOWEPS), 2010-2013. A total of 4,694 economically active participants at baseline were followed. Association between occupational classification and depression, measured using the Center for Epidemiological Studies Depression (CES-D) scale 11, was investigated using the linear mixed effects model. Blue collar (β: 0.3871, p = .0109) and sales and service worker groups (β: 0.3418, p = .0307) showed higher depression scores than the white collar group. Compared to the white collar high-income group, white collar low income, blue collar middle income, blue collar middle-low income, blue collar low income, sales and service middle-high income, sales and service middle-low income and sales and service low-income groups had higher depression scores. Occupational classification is associated with increasing depression scores. Excluding the highest income group, blue collar and sales and service worker groups exhibit higher depression scores than their white collar counterparts, implying the importance of addressing these groups. © The Author(s) 2016.

Prototype Stilbene Neutron Collar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prasad, M. K.; Shumaker, D.; Snyderman, N.

2016-10-26

A neutron collar using stilbene organic scintillator cells for fast neutron counting is described for the assay of fresh low enriched uranium (LEU) fuel assemblies. The prototype stilbene collar has a form factor similar to standard He-3 based collars and uses an AmLi interrogation neutron source. This report describes the simulation of list mode neutron correlation data on various fuel assemblies including some with neutron absorbers (burnable Gd poisons). Calibration curves (doubles vs 235U linear mass density) are presented for both thermal and fast (with Cd lining) modes of operation. It is shown that the stilbene collar meets or exceedsmore » the current capabilities of He-3 based neutron collars. A self-consistent assay methodology, uniquely suited to the stilbene collar, using triples is described which complements traditional assay based on doubles calibration curves.« less

Effect of Width of Kerf on Machining Accuracy and Subsurface Layer After WEDM

NASA Astrophysics Data System (ADS)

Mouralova, K.; Kovar, J.; Klakurkova, L.; Prokes, T.

2018-02-01

Wire electrical discharge machining is an unconventional machining technology that applies physical principles to material removal. The material is removed by a series of recurring current discharges between the workpiece and the tool electrode, and a `kerf' is created between the wire and the material being machined. The width of the kerf is directly dependent not only on the diameter of the wire used, but also on the machine parameter settings and, in particular, on the set of mechanical and physical properties of the material being machined. To ensure precise machining, it is important to have the width of the kerf as small as possible. The present study deals with the evaluation of the width of the kerf for four different metallic materials (some of which were subsequently heat treated using several methods) with different machine parameter settings. The kerf is investigated on metallographic cross sections using light and electron microscopy.

Assessing herbivore foraging behavior with GPS collars in a semiarid grassland.

PubMed

Augustine, David J; Derner, Justin D

2013-03-15

Advances in global positioning system (GPS) technology have dramatically enhanced the ability to track and study distributions of free-ranging livestock. Understanding factors controlling the distribution of free-ranging livestock requires the ability to assess when and where they are foraging. For four years (2008-2011), we periodically collected GPS and activity sensor data together with direct observations of collared cattle grazing semiarid rangeland in eastern Colorado. From these data, we developed classification tree models that allowed us to discriminate between grazing and non-grazing activities. We evaluated: (1) which activity sensor measurements from the GPS collars were most valuable in predicting cattle foraging behavior, (2) the accuracy of binary (grazing, non-grazing) activity models vs. models with multiple activity categories (grazing, resting, traveling, mixed), and (3) the accuracy of models that are robust across years vs. models specific to a given year. A binary classification tree correctly removed 86.5% of the non-grazing locations, while correctly retaining 87.8% of the locations where the animal was grazing, for an overall misclassification rate of 12.9%. A classification tree that separated activity into four different categories yielded a greater misclassification rate of 16.0%. Distance travelled in a 5 minute interval and the proportion of the interval with the sensor indicating a head down position were the two most important variables predicting grazing activity. Fitting annual models of cattle foraging activity did not improve model accuracy compared to a single model based on all four years combined. This suggests that increased sample size was more valuable than accounting for interannual variation in foraging behavior associated with variation in forage production. Our models differ from previous assessments in semiarid rangeland of Israel and mesic pastures in the United States in terms of the value of different activity sensor measurements for identifying grazing activity, suggesting that the use of GPS collars to classify cattle grazing behavior will require calibrations specific to the environment and vegetation being studied.

Ultrashort pulse laser machining of metals and alloys

DOEpatents

Perry, Michael D.; Stuart, Brent C.

2003-09-16

The invention consists of a method for high precision machining (cutting, drilling, sculpting) of metals and alloys. By using pulses of a duration in the range of 10 femtoseconds to 100 picoseconds, extremely precise machining can be achieved with essentially no heat or shock affected zone. Because the pulses are so short, there is negligible thermal conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond approximately 0.1-1 micron (dependent upon the particular material) from the laser machined surface. Due to the short duration, the high intensity (>10.sup.12 W/cm.sup.2) associated with the interaction converts the material directly from the solid-state into an ionized plasma. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces with negligible redeposition either within the kerf or on the surface. Since there is negligible heating beyond the depth of material removed, the composition of the remaining material is unaffected by the laser machining process. This enables high precision machining of alloys and even pure metals with no change in grain structure.

Analysis of machining damage in engineering ceramics by fracture mechanics, fractography and x-ray diffraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollstein, T.; Pfeiffer, W.; Rombach, M.

1996-12-31

The cost for final machining covers a significant percentage of the whole cost of a ceramic component. This is due to the difficult machining of the high performance ceramics. The high values of hardness and wear resistance, which are desired in many applications, hinder the process of machining. Only a few machining procedures are applicable to engineering ceramics e.g. grinding, polishing or ultrasonic lapping, and the rate of material removal is considerably lower than for metals. In addition crack generation in the surface regions during machining is easily possible due to the brittleness of the ceramics. The material removal duringmore » grinding, which is the most important machining procedure of engineering ceramics, takes place mainly by brittle fracture processes but also by ductile material removal. The complex stress conditions in the work piece below or in the vicinity of the grinding grits lead to a variability of cracks and crack systems like median cracks, lateral cracks or radial cracks, which extend in general {le} 50 {mu}m and which lead to the strength anisotropy of ground ceramics, if certain grinding parameters are used e.g..« less

Reversible micromachining locator

DOEpatents

Salzer, L.J.; Foreman, L.R.

1999-08-31

This invention provides a device which includes a locator, a kinematic mount positioned on a conventional tooling machine, a part carrier disposed on the locator and a retainer ring. The locator has disposed therein a plurality of steel balls, placed in an equidistant position circumferentially around the locator. The kinematic mount includes a plurality of magnets which are in registry with the steel balls on the locator. In operation, a blank part to be machined is placed between a surface of a locator and the retainer ring (fitting within the part carrier). When the locator (with a blank part to be machined) is coupled to the kinematic mount, the part is thus exposed for the desired machining process. Because the locator is removably attachable to the kinematic mount, it can easily be removed from the mount, reversed, and reinserted onto the mount for additional machining. Further, the locator can likewise be removed from the mount and placed onto another tooling machine having a properly aligned kinematic mount. Because of the unique design and use of magnetic forces of the present invention, positioning errors of less than 0.25 micrometer for each machining process can be achieved. 7 figs.

Machinability of lithium disilicate glass ceramic in in vitro dental diamond bur adjusting process.

PubMed

Song, Xiao-Fei; Ren, Hai-Tao; Yin, Ling

2016-01-01

Esthetic high-strength lithium disilicate glass ceramics (LDGC) are used for monolithic crowns and bridges produced in dental CAD/CAM and oral adjusting processes, which machinability affects the restorative quality. A machinability study has been made in the simulated oral clinical machining of LDGC with a dental handpiece and diamond burs, regarding the diamond tool wear and chip control, machining forces and energy, surface finish and integrity. Machining forces, speeds and energy in in vitro dental adjusting of LDGC were measured by a high-speed data acquisition and force sensor system. Machined LDGC surfaces were assessed using three-dimensional non-contact chromatic confocal optical profilometry and scanning electron microscopy (SEM). Diamond bur morphology and LDGC chip shapes were also examined using SEM. Minimum tool wear but significant LDGC chip accumulations were found. Machining forces and energy significantly depended on machining conditions (p<0.05) and were significantly higher than other glass ceramics (p<0.05). Machining speeds dropped more rapidly with increased removal rates than other glass ceramics (p<0.05). Two material machinability indices associated with the hardness, Young's modulus and fracture toughness were derived based on the normal force-removal rate relations, which ranked LDGC the most difficult to machine among glass ceramics. Surface roughness for machined LDGC was comparable for other glass ceramics. The removal mechanisms of LDGC were dominated by penetration-induced brittle fracture and shear-induced plastic deformation. Unlike most other glass ceramics, distinct intergranular and transgranular fractures of lithium disilicate crystals were found in LDGC. This research provides the fundamental data for dental clinicians on the machinability of LDGC in intraoral adjustments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Increased Executive Functioning, Attention, and Cortical Thickness in White-Collar Criminals

PubMed Central

Raine, Adrian; Laufer, William S.; Yang, Yaling; Narr, Katherine L.; Thompson, Paul; Toga, Arthur W.

2011-01-01

Very little is known on white collar crime and how it differs to other forms of offending. This study tests the hypothesis that white collar criminals have better executive functioning, enhanced information processing, and structural brain superiorities compared to offender controls. Using a case-control design, executive functioning, orienting, and cortical thickness was assessed in 21 white collar criminals matched with 21 controls on age, gender, ethnicity, and general level of criminal offending. White collar criminals had significantly better executive functioning, increased electrodermal orienting, increased arousal, and increased cortical gray matter thickness in the ventromedial prefrontal cortex, inferior frontal gyrus, somatosensory cortex, and the temporal-parietal junction compared to controls. Results, while initial, constitute the first findings on neurobiological characteristics of white-collar criminals It is hypothesized that white collar criminals have information-processing and brain superiorities that give them an advantage in perpetrating criminal offenses in occupational settings. PMID:22002326

Increased executive functioning, attention, and cortical thickness in white-collar criminals.

PubMed

Raine, Adrian; Laufer, William S; Yang, Yaling; Narr, Katherine L; Thompson, Paul; Toga, Arthur W

2012-12-01

Very little is known on white-collar crime and how it differs to other forms of offending. This study tests the hypothesis that white-collar criminals have better executive functioning, enhanced information processing, and structural brain superiorities compared with offender controls. Using a case-control design, executive functioning, orienting, and cortical thickness was assessed in 21 white-collar criminals matched with 21 controls on age, gender, ethnicity, and general level of criminal offending. White-collar criminals had significantly better executive functioning, increased electrodermal orienting, increased arousal, and increased cortical gray matter thickness in the ventromedial prefrontal cortex, inferior frontal gyrus, somatosensory cortex, and the temporal-parietal junction compared with controls. Results, while initial, constitute the first findings on neurobiological characteristics of white-collar criminals. It is hypothesized that white-collar criminals have information-processing and brain superiorities that give them an advantage in perpetrating criminal offenses in occupational settings. Copyright © 2011 Wiley Periodicals, Inc.

Laser machining of explosives

DOEpatents

Perry, Michael D.; Stuart, Brent C.; Banks, Paul S.; Myers, Booth R.; Sefcik, Joseph A.

2000-01-01

The invention consists of a method for machining (cutting, drilling, sculpting) of explosives (e.g., TNT, TATB, PETN, RDX, etc.). By using pulses of a duration in the range of 5 femtoseconds to 50 picoseconds, extremely precise and rapid machining can be achieved with essentially no heat or shock affected zone. In this method, material is removed by a nonthermal mechanism. A combination of multiphoton and collisional ionization creates a critical density plasma in a time scale much shorter than electron kinetic energy is transferred to the lattice. The resulting plasma is far from thermal equilibrium. The material is in essence converted from its initial solid-state directly into a fully ionized plasma on a time scale too short for thermal equilibrium to be established with the lattice. As a result, there is negligible heat conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond a few microns from the laser machined surface. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces. There is no detonation or deflagration of the explosive in the process and the material which is removed is rendered inert.

Simplified flangeless unisex waveguide coupler assembly

DOEpatents

Michelangelo, Dimartino; Moeller, Charles P.

1993-01-01

A unisex coupler assembly is disclosed capable of providing a leak tight coupling for waveguides with axial alignment of the waveguides and rotational capability. The sealing means of the coupler assembly are not exposed to RF energy, and the coupler assembly does not require the provision of external flanges on the waveguides. In a preferred embodiment, O ring seals are not used and the coupler assembly is, therefore, bakeable at a temperature up to about 150.degree. C. The coupler assembly comprises a split collar which clamps around the waveguides and a second collar which fastens to the split collar. The split collar contains an inner annular groove. Each of the waveguides is provided with an external annular groove which receives a retaining ring. The split collar is clamped around one of the waveguides with the inner annular groove of the split collar engaging the retaining ring carried in the external annular groove in the waveguide. The second collar is then slipped over the second waveguide behind the annular groove and retaining ring therein and the second collar is coaxially secured by fastening means to the split collar to draw the respective waveguides together by coaxial force exerted by the second collar against the retaining ring on the second waveguide. A sealing ring is placed against an external sealing surface at a reduced external diameter end formed on one waveguide to sealingly engage a corresponding sealing surface on the other waveguide as the waveguides are urged toward each other.

Simplified flangeless unisex waveguide coupler assembly

DOEpatents

Michelangelo, D.; Moeller, C.P.

1993-05-04

A unisex coupler assembly is disclosed capable of providing a leak tight coupling for waveguides with axial alignment of the waveguides and rotational capability. The sealing means of the coupler assembly are not exposed to RF energy, and the coupler assembly does not require the provision of external flanges on the waveguides. In a preferred embodiment, O ring seals are not used and the coupler assembly is, therefore, bakeable at a temperature up to about 150 C. The coupler assembly comprises a split collar which clamps around the waveguides and a second collar which fastens to the split collar. The split collar contains an inner annular groove. Each of the waveguides is provided with an external annular groove which receives a retaining ring. The split collar is clamped around one of the waveguides with the inner annular groove of the split collar engaging the retaining ring carried in the external annular groove in the waveguide. The second collar is then slipped over the second waveguide behind the annular groove and retaining ring therein and the second collar is coaxially secured by fastening means to the split collar to draw the respective waveguides together by coaxial force exerted by the second collar against the retaining ring on the second waveguide. A sealing ring is placed against an external sealing surface at a reduced external diameter end formed on one waveguide to sealingly engage a corresponding sealing surface on the other waveguide as the waveguides are urged toward each other.

Simplified flangeless unisex waveguide coupler assembly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michelangelo, D.; Moeller, C.P.

1993-05-04

A unisex coupler assembly is disclosed capable of providing a leak tight coupling for waveguides with axial alignment of the waveguides and rotational capability. The sealing means of the coupler assembly are not exposed to RF energy, and the coupler assembly does not require the provision of external flanges on the waveguides. In a preferred embodiment, O ring seals are not used and the coupler assembly is, therefore, bakeable at a temperature up to about 150 C. The coupler assembly comprises a split collar which clamps around the waveguides and a second collar which fastens to the split collar. Themore » split collar contains an inner annular groove. Each of the waveguides is provided with an external annular groove which receives a retaining ring. The split collar is clamped around one of the waveguides with the inner annular groove of the split collar engaging the retaining ring carried in the external annular groove in the waveguide. The second collar is then slipped over the second waveguide behind the annular groove and retaining ring therein and the second collar is coaxially secured by fastening means to the split collar to draw the respective waveguides together by coaxial force exerted by the second collar against the retaining ring on the second waveguide. A sealing ring is placed against an external sealing surface at a reduced external diameter end formed on one waveguide to sealingly engage a corresponding sealing surface on the other waveguide as the waveguides are urged toward each other.« less

Efficient bounding schemes for the two-center hybrid flow shop scheduling problem with removal times.

PubMed

Hidri, Lotfi; Gharbi, Anis; Louly, Mohamed Aly

2014-01-01

We focus on the two-center hybrid flow shop scheduling problem with identical parallel machines and removal times. The job removal time is the required duration to remove it from a machine after its processing. The objective is to minimize the maximum completion time (makespan). A heuristic and a lower bound are proposed for this NP-Hard problem. These procedures are based on the optimal solution of the parallel machine scheduling problem with release dates and delivery times. The heuristic is composed of two phases. The first one is a constructive phase in which an initial feasible solution is provided, while the second phase is an improvement one. Intensive computational experiments have been conducted to confirm the good performance of the proposed procedures.

Efficient Bounding Schemes for the Two-Center Hybrid Flow Shop Scheduling Problem with Removal Times

PubMed Central

2014-01-01

We focus on the two-center hybrid flow shop scheduling problem with identical parallel machines and removal times. The job removal time is the required duration to remove it from a machine after its processing. The objective is to minimize the maximum completion time (makespan). A heuristic and a lower bound are proposed for this NP-Hard problem. These procedures are based on the optimal solution of the parallel machine scheduling problem with release dates and delivery times. The heuristic is composed of two phases. The first one is a constructive phase in which an initial feasible solution is provided, while the second phase is an improvement one. Intensive computational experiments have been conducted to confirm the good performance of the proposed procedures. PMID:25610911

Comparison of accelerometer-measured sedentary behavior, and light- and moderate-to-vigorous-intensity physical activity in white- and blue-collar workers in a Japanese manufacturing plant.

PubMed

Fukushima, Noritoshi; Kitabayashi, Makiko; Kikuchi, Hiroyuki; Sasai, Hiroyuki; Oka, Koichiro; Nakata, Yoshio; Tanaka, Shigeho; Inoue, Shigeru

2018-05-25

The times spent in sedentary behavior (SB) and moderate-to-vigorous physical activity (MVPA) are independently associated with health outcomes; however, objective data on physical activity levels including SB among different occupations is limited. We compared accelerometer-measured times spent in SB, light-intensity physical activity (LPA), and MVPA, and the patterns associated with prolonged bouts of SB between white- and blue-collar workers. The study population consisted of 102 full-time plant workers (54 white-collar and 48 blue-collar) who wore a triaxial accelerometer during waking hours for 5 working days. Accelerometer-measured activity levels were categorized as SB (≤1.5 metabolic equivalents (METs)), LPA (1.6-2.9 METs), and MVPA (≥3.0 METs). A sedentary bout was defined as consecutive minutes during which the accelerometer registered less than ≤1.5 METs. Accelerometer variables were compared between white- and blue-collar workers through analysis of covariance. During working hours, white-collar workers spent significantly more time in SB and less time in LPA than blue-collar workers (SB: 6.4 h vs. 4.8 h, 73% vs. 55% of total work time; LPA: 1.9 h vs. 3.5 h, 22% vs. 40% of total work time, p<.001), whereas the MVPA time was similar between the groups. White-collar workers spent significantly more SB time in prolonged sedentary bouts (≥30 min) compared to blue-collar workers. During leisure time, the SB, LPA, and MVPA times were similar between the groups. White-collar workers have significantly longer SB times than blue-collar workers during work hours, and do not compensate for their excess SB during work by reducing SB during leisure time.

16 CFR 423.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Dryclean means a commercial process by which soil is removed from products or specimens in a machine which uses any common organic solvent (e.g. petroleum, perchlorethylene, fluorocarbon). The process may also... by which soil is removed from products in a specially designed machine using water, detergent or soap...

16 CFR 423.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Dryclean means a commercial process by which soil is removed from products or specimens in a machine which uses any common organic solvent (e.g. petroleum, perchlorethylene, fluorocarbon). The process may also... by which soil is removed from products in a specially designed machine using water, detergent or soap...

16 CFR 423.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Dryclean means a commercial process by which soil is removed from products or specimens in a machine which uses any common organic solvent (e.g. petroleum, perchlorethylene, fluorocarbon). The process may also... by which soil is removed from products in a specially designed machine using water, detergent or soap...

16 CFR 423.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Dryclean means a commercial process by which soil is removed from products or specimens in a machine which uses any common organic solvent (e.g. petroleum, perchlorethylene, fluorocarbon). The process may also... by which soil is removed from products in a specially designed machine using water, detergent or soap...

16 CFR 423.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Dryclean means a commercial process by which soil is removed from products or specimens in a machine which uses any common organic solvent (e.g. petroleum, perchlorethylene, fluorocarbon). The process may also... by which soil is removed from products in a specially designed machine using water, detergent or soap...

Evaluation of novel disposable, light-weight radiation protection devices in an interventional radiology setting: a randomized controlled trial.

PubMed

Uthoff, Heiko; Peña, Constantino; West, James; Contreras, Francisco; Benenati, James F; Katzen, Barry T

2013-04-01

Radiation exposure to interventionalists is increasing. The currently available standard radiation protection devices are heavy and do not protect the head of the operator. The aim of this study was to evaluate the effectiveness and comfort of caps and thyroid collars made of a disposable, light-weight, lead-free material (XPF) for occupational radiation protection in a clinical setting. Up to two interventional operators were randomized to wear a XPF or standard 0.5-mm lead-equivalent thyroid collars in 60 consecutive endovascular procedures requiring fluoroscopy. Simultaneously a XPF cap was worn by all operators. Radiation doses were measured using dosimeters placed outside and underneath the caps and thyroid collars. Wearing comfort was assessed at the end of each procedure on a visual analog scale (0-100 [100 = optimal]). Patient and procedure data did not differ between the XPF and standard protection groups. The cumulative radiation dose measured outside the cap was 15,700 μSv and outside the thyroid collars 21,240 μSv. Measured radiation attenuation provided by the XPF caps (n = 70), XPF thyroid collars (n = 40), and standard thyroid collars (n = 38) was 85.4% ± 25.6%, 79.7% ± 25.8% and 71.9% ± 34.2%, respectively (mean difference XPF vs standard thyroid collars, 7.8% [95% CI, -5.9% to 21.6%]; p = 0.258). The median XPF cap weight was 144 g (interquartile range, 128-170 g), and the XPF thyroid collars were 27% lighter than the standard thyroid collars (p < 0.0001). Operators rated the comfort of all devices as high (mean scores for XPF caps and XPF thyroid collars 83.4 ± 12.7 (SD) and 88.5 ± 14.6, respectively; mean scores for standard thyroid collars 89.6 ± 9.9) (p = 0.648). Light-weight disposable caps and thyroid collars made of XPF were assessed as being comfortable to wear, and they provide radiation protection similar to that of standard 0.5-mm lead-equivalent thyroid collars.

Biomachining - A new approach for micromachining of metals

NASA Astrophysics Data System (ADS)

Vigneshwaran, S. C. Sakthi; Ramakrishnan, R.; Arun Prakash, C.; Sashank, C.

2018-04-01

Machining is the process of removal of material from workpiece. Machining can be done by physical, chemical or biological methods. Though physical and chemical methods have been widely used in machining process, they have their own disadvantages such as development of heat affected zone and usage of hazardous chemicals. Biomachining is the machining process in which bacteria is used to remove material from the metal parts. Chemolithotrophic bacteria such as Acidothiobacillus ferroxidans has been used in biomachining of metals like copper, iron etc. These bacteria are used because of their property of catalyzing the oxidation of inorganic substances. Biomachining is a suitable process for micromachining of metals. This paper reviews the biomachining process and various mechanisms involved in biomachining. This paper also briefs about various parameters/factors to be considered in biomachining and also the effect of those parameters on metal removal rate.

Boron-Coated Straw Collar for Uranium Neutron Coincidence Collar Replacement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Jianwei; Croft, Stephen; McElroy, Robert Dennis

The objective of this project was to design and optimize, in simulation space, an active neutron coincidence counter (or collar) using boron-coated straws (BCSs) as a non- 3He replacement to the Uranium Neutron Coincidence Collar (UNCL). UNCL has been used by the International Atomic Energy Agency (IAEA) and European Atomic Energy Community (Euratom) since the 1980s to verify the 235U content in fresh light water reactor fuel assemblies for safeguards purposes. This report documents the design and optimization of the BCS collar.

A time-shared machine repair problem with mixed spares under N-policy

NASA Astrophysics Data System (ADS)

Jain, Madhu; Shekhar, Chandra; Shukla, Shalini

2016-06-01

The present investigation deals with a machine repair problem consisting of cold and warm standby machines. The machines are subject to breakdown and are repaired by the permanent repairman operating under N-policy. There is provision of one additional removable repairman who is called upon when the work load of failed machines crosses a certain threshold level and is removed as soon as the work load again ceases to that level. Both repairmen recover the failed machines by following the time sharing concept which means that the repairmen share their repair job simultaneously among all the failed machines that have joined the system for repair. Markovian model has been developed by considering the queue dependent rates and solved analytically using the recursive technique. Various performance indices are derived which are further used to obtain the cost function. By taking illustration, numerical simulation and sensitivity analysis have been provided.

Fundamental investigation on influence of external heat on chip formation during thermal assisted machining

NASA Astrophysics Data System (ADS)

Alkali, A. U.; Ginta, T. L.; Abdulrani, A. M.; Elsiti, N. M.

2018-04-01

Various heat sources have been investigated by numerous researchers to reveal machinability benefits of thermally assisted machining (TAM) process. Fewer engineering materials have been tested. In the same vein, those researches continue to demonstrate effective performance of TAM in terms of bulk material removal rate, improved surface finish, prolong tool life and reduction of cutting forces among others. Experimental investigation on the strain-hardenability and flow stress of material removed with respect to increase in temperature in TAM has not been given attention in previous studies. This study investigated the pattern of chip morphology and segmentation giving close attention to influence of external heat source responsible for strain – hardenability of the material removed during TAM and dry machining at room temperature. Full immersion down cut milling was used throughout the machining conditions. Machining was conducted on AISI 316L using uncoated tungsten carbide end mill insert at varying cutting speeds (V) of 50, 79, and 100 m/min, and feed rates (f) of 0.15, 0.25, and 0.4 mm/tooth while the depth of cut was maintained at 0.2mm throughout the machining trials. The analyses of chip formation, segmentations and stain hardenability were carried out by using LMU light microscope, field emission microscopy and micro indentation. The study observed that build up edge is formed when a stagnation zone develops in front of tool tip which give rise to poor thermal gradient for conduction heat to be transferred within the bulk material during dry machining. This promotes varying strain – hardening of the material removed with evident high chips hardness and thickness, whereas TAM circumvents such impairment by softening the shear zone through local preheat.

Restriction of neck flexion using soft cervical collars: a preliminary study

PubMed Central

Aker, Peter D; Randoll, Martine; Rheault, Chantal; O’Connor, Sandra

1991-01-01

This study investigates the use of dropped neck flexion as a manoeuvre to test the restrictive abilities of two different types of soft collars, an Airway soft cervical collar and a handmade cervical rough. The range of neck flexion of 40 asymptomatic subjects aged 20-29 was assessed, both with and without collar wear, using a Spinal Rangiometer. Dropped neck flexion is described as possibly being more representative of the type of movement that a patient with neck pain will undergo, and hence a more useful manoeuvre to employ when testing for the restrictive abilities of soft cervical collars. The mean dropped flexion was 64 degrees without collar wear, 58 degrees with the Airway soft collar, and 34 degrees with the cervical rough. Only the cervical rough provided both statistically (p < 0.001) and clinically (> 15°) significant restriction of dropped neck flexion. The comfort, preparation time, and ease of application of each of these collars is not addressed in this study, and may reflect on use in clinical practice. This preliminary study provides insight and pilot data for future studies in this area. ImagesFigure 2Figure 3

Collar height and heel counter-stiffness for ankle stability and athletic performance in basketball.

PubMed

Liu, Hui; Wu, Zitian; Lam, Wing-Kai

2017-01-01

This study examined the effects of collar height and heel counter-stiffness of basketball shoes on ankle stability during sidestep cutting and athletic performance. 15 university basketball players wore customized shoes with different collar heights (high and low) and heel counter-stiffness (regular, stiffer and stiffest) for this study. Ankle stability was evaluated in sidestep cutting while athletic performance evaluated in jumping and agility tasks. All variables were analysed using two-way repeated ANOVA. Results showed shorter time to peak ankle inversion for both high collar and stiff heel counter conditions (P < 0.05), while smaller initial ankle inversion angle, peak inversion velocity and total range of inversion for wearing high collar shoes (P < 0.05). No shoe differences were found for performance variables. These findings imply that the collar height might play a larger role in lateral stability than heel counter-stiffness, while both collar height and counter-stiffness have no effect on athletic performance.

Field testing the Wildlink Capture Collar on wolves

USGS Publications Warehouse

Mech, L. David; Gesit, Eric L.

1992-01-01

Seventeen Wildlink capture collars were tested 61 times on 18 gray wolves (Canis lupus) during 1989-1991 in the Superior National Forest of northeastern Minnesota. Overall success rate was 89%, and most failures were attributable to premature battery expiration. When batteries were changed ≤ every 2 months, 17 of 17 tests succeeded. With an upgraded version of the collar in which batteries lasted longer, 17 of 18 tests succeeded. Over the 2-year study, 6 of the 17 collars were lost. For serially recapturing individuals, the Wildlink collar proved useful and reliable if care was taken to replace batteries at proper intervals.

Computer-aided design/computer-aided manufacturing skull base drill.

PubMed

Couldwell, William T; MacDonald, Joel D; Thomas, Charles L; Hansen, Bradley C; Lapalikar, Aniruddha; Thakkar, Bharat; Balaji, Alagar K

2017-05-01

The authors have developed a simple device for computer-aided design/computer-aided manufacturing (CAD-CAM) that uses an image-guided system to define a cutting tool path that is shared with a surgical machining system for drilling bone. Information from 2D images (obtained via CT and MRI) is transmitted to a processor that produces a 3D image. The processor generates code defining an optimized cutting tool path, which is sent to a surgical machining system that can drill the desired portion of bone. This tool has applications for bone removal in both cranial and spine neurosurgical approaches. Such applications have the potential to reduce surgical time and associated complications such as infection or blood loss. The device enables rapid removal of bone within 1 mm of vital structures. The validity of such a machining tool is exemplified in the rapid (< 3 minutes machining time) and accurate removal of bone for transtemporal (for example, translabyrinthine) approaches.

Radiator debris removing apparatus and work machine using same

DOEpatents

Martin, Kevin L [Washburn, IL; Elliott, Dwight E [Chillicothe, IL

2008-09-02

A radiator assembly includes a finned radiator core and a debris removing apparatus having a compressed air inlet and at least one compressed air outlet configured to direct compressed air through the radiator core. A work machine such as a wheel loader includes a radiator and a debris removing apparatus coupled with on-board compressed air and having at least one pressurized gas outlet configured to direct a gas toward the face of the radiator.

Joint effects of social class and community occupational structure on coronary mortality among black men and white men, upstate New York, 1988–92

PubMed Central

Armstrong, D; Strogatz, D; Barnett, E; Wang, R

2003-01-01

Study objective: Occupational structure represents the unequal geographical distribution of more desirable jobs among communities (for example, white collar jobs). This study examines joint effects of social class, race, and county occupational structure on coronary mortality rates for men, ages 35–64 years, 1988–92, in upstate New York. Design: Upstate New York's 57 counties were classified into three occupational structure categories; counties with the lowest percentages of the labour force in managerial, professional, and technical occupations were classified in category I, counties with the highest percentages were in category III. Age adjusted coronary heart disease (CHD) mortality rates, 35–64 years, (from vital statistics and census data) were calculated for each occupational structure category. Main results: An inverse association between CHD mortality and occupational structure was observed among blue collar and white collar workers, among black men and white men, with the lowest CHD mortality observed among white collar, white men in category III (135/100 000). About two times higher mortality was observed among blue collar than white collar workers. Among blue collar workers, mortality was 1.3–1.8 times higher among black compared with white workers, and the highest rates were observed among black, blue collar workers (689/100 000). Also, high residential race segregation was shown in all areas. Conclusions: Results suggest the importance of community conditions in coronary health of local populations; however, differential impact on subpopulations was shown. Blue collar and black workers may especially lack economic and other resources to use available community services and/or may experience worse working and living conditions compared with white collar and white workers in the same communities. PMID:12700223

Prehospital Use of Cervical Collars in Trauma Patients: A Critical Review

PubMed Central

Asbjørnsen, Helge; Habiba, Samer; Sunde, Geir Arne; Wester, Knut

2014-01-01

Abstract The cervical collar has been routinely used for trauma patients for more than 30 years and is a hallmark of state-of-the-art prehospital trauma care. However, the existing evidence for this practice is limited: Randomized, controlled trials are largely missing, and there are uncertain effects on mortality, neurological injury, and spinal stability. Even more concerning, there is a growing body of evidence and opinion against the use of collars. It has been argued that collars cause more harm than good, and that we should simply stop using them. In this critical review, we discuss the pros and cons of collar use in trauma patients and reflect on how we can move our clinical practice forward. Conclusively, we propose a safe, effective strategy for prehospital spinal immobilization that does not include routine use of collars. PMID:23962031

Job demands and health complaints in white and blue collar workers.

PubMed

Schreuder, K J; Roelen, C A M; Koopmans, P C; Groothoff, J W

2008-01-01

General health in the working population is thought to depend on working conditions. This survey studied job demands and health complaints in working white and blue collar employees. We expect physical and psychological job demands to be differentially distributed among white and blue collar workers. Do they report health complaints consistent with their working conditions? Cross-sectional study of 323 white and 383 blue collar workers. They completed the Basic Occupational Health Questionnaire, a valid and reliable self-report questionnaire about health, work and working conditions. The results were analysed using Chi-square and logistic regression analysis, controlling for educational level as a proxy of socioeconomic status. The questionnaires of 280 white and 251 blue collar workers were suitable for analysis. White collar workers reported higher psychological job demands, and blue collar workers reported higher physical demands. In both occupational groups, low back pain, fatigue and upper respiratory complaints were most common. The rates of low back pain and pain in the lower extremity were higher in blue collar workers, as were regular headaches, pain in the cardiac region and feeling sleepy. However, these relationships substantially weakened when the educational level was adjusted for. Despite the differential distribution of job demands, white and blue collar workers reported similar health complaints. Health in the working population depended predominantly on socioeconomic status. Interventions to improve general health of employees should be directed at their socioeconomic position instead of working conditions.

Extrication collars can result in abnormal separation between vertebrae in the presence of a dissociative injury.

PubMed

Ben-Galim, Peleg; Dreiangel, Niv; Mattox, Kenneth L; Reitman, Charles A; Kalantar, S Babak; Hipp, John A

2010-08-01

Cervical collars are applied to millions of trauma victims with the intent of protecting against secondary spine injuries. Adverse clinical outcomes during the management of trauma patients led to the hypothesis that extrication collars may be harmful in some cases. The literature provides indirect support for this observation. The purpose of this study was to directly evaluate cervical biomechanics after application of a cervical collar in the presence of severe neck injury. Cranial-caudal displacements in the upper cervical spine were measured in cadavers from images taken before and after application of collars following creation of an unstable upper cervical spine injury. In the presence of severe injury, collar application resulted in 7.3 mm +/- 4.0 mm of separation between C1 and C2 in a cadaver model. In general, collars had the effect of pushing the head away from the shoulders. This study was consistent with previous evidence that extrication collars can result in abnormal distraction within the upper cervical spine in the presence of a severe injury. These observations support the need to prioritize additional research to better understand the risks and benefits of cervical stabilization methods and to determine whether improved stabilization methods can help to avoid potentially harmful displacements between vertebrae.

Component restraint system

DOEpatents

Blake, John C.

1983-05-24

An object restraint system is provided with a collar for gripping the object and a plurality of struts attached to the collar and to anchor means by universal-type joints, the struts being arranged in tangential relation about the collar.

Surface and subsurface cracks characteristics of single crystal SiC wafer in surface machining

NASA Astrophysics Data System (ADS)

Qiusheng, Y.; Senkai, C.; Jisheng, P.

2015-03-01

Different machining processes were used in the single crystal SiC wafer machining. SEM was used to observe the surface morphology and a cross-sectional cleavages microscopy method was used for subsurface cracks detection. Surface and subsurface cracks characteristics of single crystal SiC wafer in abrasive machining were analysed. The results show that the surface and subsurface cracks system of single crystal SiC wafer in abrasive machining including radial crack, lateral crack and the median crack. In lapping process, material removal is dominated by brittle removal. Lots of chipping pits were found on the lapping surface. With the particle size becomes smaller, the surface roughness and subsurface crack depth decreases. When the particle size was changed to 1.5µm, the surface roughness Ra was reduced to 24.0nm and the maximum subsurface crack was 1.2µm. The efficiency of grinding is higher than lapping. Plastic removal can be achieved by changing the process parameters. Material removal was mostly in brittle fracture when grinding with 325# diamond wheel. Plow scratches and chipping pits were found on the ground surface. The surface roughness Ra was 17.7nm and maximum subsurface crack depth was 5.8 µm. When grinding with 8000# diamond wheel, the material removal was in plastic flow. Plastic scratches were found on the surface. A smooth surface of roughness Ra 2.5nm without any subsurface cracks was obtained. Atomic scale removal was possible in cluster magnetorheological finishing with diamond abrasive size of 0.5 µm. A super smooth surface eventually obtained with a roughness of Ra 0.4nm without any subsurface crack.

Badgers prefer cattle pasture but avoid cattle: implications for bovine tuberculosis control.

PubMed

Woodroffe, Rosie; Donnelly, Christl A; Ham, Cally; Jackson, Seth Y B; Moyes, Kelly; Chapman, Kayna; Stratton, Naomi G; Cartwright, Samantha J

2016-10-01

Effective management of infectious disease relies upon understanding mechanisms of pathogen transmission. In particular, while models of disease dynamics usually assume transmission through direct contact, transmission through environmental contamination can cause different dynamics. We used Global Positioning System (GPS) collars and proximity-sensing contact-collars to explore opportunities for transmission of Mycobacterium bovis [causal agent of bovine tuberculosis] between cattle and badgers (Meles meles). Cattle pasture was badgers' most preferred habitat. Nevertheless, although collared cattle spent 2914 collar-nights in the home ranges of contact-collared badgers, and 5380 collar-nights in the home ranges of GPS-collared badgers, we detected no direct contacts between the two species. Simultaneous GPS-tracking revealed that badgers preferred land > 50 m from cattle. Very infrequent direct contact indicates that badger-to-cattle and cattle-to-badger M. bovis transmission may typically occur through contamination of the two species' shared environment. This information should help to inform tuberculosis control by guiding both modelling and farm management. © 2016 John Wiley & Sons Ltd/CNRS.

Movement activity based classification of animal behaviour with an application to data from cheetah (Acinonyx jubatus).

PubMed

Grünewälder, Steffen; Broekhuis, Femke; Macdonald, David Whyte; Wilson, Alan Martin; McNutt, John Weldon; Shawe-Taylor, John; Hailes, Stephen

2012-01-01

We propose a new method, based on machine learning techniques, for the analysis of a combination of continuous data from dataloggers and a sampling of contemporaneous behaviour observations. This data combination provides an opportunity for biologists to study behaviour at a previously unknown level of detail and accuracy; however, continuously recorded data are of little use unless the resulting large volumes of raw data can be reliably translated into actual behaviour. We address this problem by applying a Support Vector Machine and a Hidden-Markov Model that allows us to classify an animal's behaviour using a small set of field observations to calibrate continuously recorded activity data. Such classified data can be applied quantitatively to the behaviour of animals over extended periods and at times during which observation is difficult or impossible. We demonstrate the usefulness of the method by applying it to data from six cheetah (Acinonyx jubatus) in the Okavango Delta, Botswana. Cumulative activity data scores were recorded every five minutes by accelerometers embedded in GPS radio-collars for around one year on average. Direct behaviour sampling of each of the six cheetah were collected in the field for comparatively short periods. Using this approach we are able to classify each five minute activity score into a set of three key behaviour (feeding, mobile and stationary), creating a continuous behavioural sequence for the entire period for which the collars were deployed. Evaluation of our classifier with cross-validation shows the accuracy to be 83%-94%, but that the accuracy for individual classes is reduced with decreasing sample size of direct observations. We demonstrate how these processed data can be used to study behaviour identifying seasonal and gender differences in daily activity and feeding times. Results given here are unlike any that could be obtained using traditional approaches in both accuracy and detail.

Movement Activity Based Classification of Animal Behaviour with an Application to Data from Cheetah (Acinonyx jubatus)

PubMed Central

Grünewälder, Steffen; Broekhuis, Femke; Macdonald, David Whyte; Wilson, Alan Martin; McNutt, John Weldon; Shawe-Taylor, John; Hailes, Stephen

2012-01-01

We propose a new method, based on machine learning techniques, for the analysis of a combination of continuous data from dataloggers and a sampling of contemporaneous behaviour observations. This data combination provides an opportunity for biologists to study behaviour at a previously unknown level of detail and accuracy; however, continuously recorded data are of little use unless the resulting large volumes of raw data can be reliably translated into actual behaviour. We address this problem by applying a Support Vector Machine and a Hidden-Markov Model that allows us to classify an animal's behaviour using a small set of field observations to calibrate continuously recorded activity data. Such classified data can be applied quantitatively to the behaviour of animals over extended periods and at times during which observation is difficult or impossible. We demonstrate the usefulness of the method by applying it to data from six cheetah (Acinonyx jubatus) in the Okavango Delta, Botswana. Cumulative activity data scores were recorded every five minutes by accelerometers embedded in GPS radio-collars for around one year on average. Direct behaviour sampling of each of the six cheetah were collected in the field for comparatively short periods. Using this approach we are able to classify each five minute activity score into a set of three key behaviour (feeding, mobile and stationary), creating a continuous behavioural sequence for the entire period for which the collars were deployed. Evaluation of our classifier with cross-validation shows the accuracy to be , but that the accuracy for individual classes is reduced with decreasing sample size of direct observations. We demonstrate how these processed data can be used to study behaviour identifying seasonal and gender differences in daily activity and feeding times. Results given here are unlike any that could be obtained using traditional approaches in both accuracy and detail. PMID:23185301

Estimation of tool wear compensation during micro-electro-discharge machining of silicon using process simulation

NASA Astrophysics Data System (ADS)

Muralidhara, .; Vasa, Nilesh J.; Singaperumal, M.

2010-02-01

A micro-electro-discharge machine (Micro EDM) was developed incorporating a piezoactuated direct drive tool feed mechanism for micromachining of Silicon using a copper tool. Tool and workpiece materials are removed during Micro EDM process which demand for a tool wear compensation technique to reach the specified depth of machining on the workpiece. An in-situ axial tool wear and machining depth measurement system is developed to investigate axial wear ratio variations with machining depth. Stepwise micromachining experiments on silicon wafer were performed to investigate the variations in the silicon removal and tool wear depths with increase in tool feed. Based on these experimental data, a tool wear compensation method is proposed to reach the desired depth of micromachining on silicon using copper tool. Micromachining experiments are performed with the proposed tool wear compensation method and a maximum workpiece machining depth variation of 6% was observed.

Positive dwell time algorithm with minimum equal extra material removal in deterministic optical surfacing technology.

PubMed

Li, Longxiang; Xue, Donglin; Deng, Weijie; Wang, Xu; Bai, Yang; Zhang, Feng; Zhang, Xuejun

2017-11-10

In deterministic computer-controlled optical surfacing, accurate dwell time execution by computer numeric control machines is crucial in guaranteeing a high-convergence ratio for the optical surface error. It is necessary to consider the machine dynamics limitations in the numerical dwell time algorithms. In this paper, these constraints on dwell time distribution are analyzed, and a model of the equal extra material removal is established. A positive dwell time algorithm with minimum equal extra material removal is developed. Results of simulations based on deterministic magnetorheological finishing demonstrate the necessity of considering machine dynamics performance and illustrate the validity of the proposed algorithm. Indeed, the algorithm effectively facilitates the determinacy of sub-aperture optical surfacing processes.

Miniaturized double latching solenoid valve

NASA Technical Reports Server (NTRS)

Smith, James T. (Inventor)

2010-01-01

A valve includes a generally elongate pintle; a spacer having a rounded surface that bears against the pintle; a bulbous tip fixed to the spacer; and a hollow, generally cylindrical collar fixed to the pintle, the collar enclosing the spacer and the tip and including an opening through which a portion of the tip extends, the opening in the collar and interior of the collar being of a size such that the tip floats therein.

[Health impact assessment of "white-collar exemption" in Japan].

PubMed

Fujino, Yoshihisa; Matsuda, Shinya

2007-03-01

This work conducted a health impact assessment (HIA) of the Japanese Government's proposal concerning the introduction of so called "white-collar exemption" into the Japanese labor market. We adopted the Merseyside model and performed a rapid health impact assessment to assess the potential health effects of white-collar exemption. In this HIA, several health determinants which may possibly be affected, both positively and negatively, were identified based on experts' judgments. Literature evidence was assessed using PubMed and other databases. In addition, we searched for the opinions of those affected by white-collar exemption from internet web sites, and six concerns were identified. Long working hours were identified as the most serious concern by both experts and those affected. White-collar exemption may increase irregular working patterns which may be related to sleep disorder, stress, and cardiovascular disease. Family function and social participation will also be affected by irregular working patterns. On the other hand, in terms of stress, white-collar exemption may benefit from a higher degree of job control. There are possibilities that white-collar exemption may enable an improved work-life balance and enable access of some groups of the population, such as people with disabilities or parents looking after children, greater access to the labour market. However, it is uncertain whether the benefits of white-collar exemption would overcome those of the current free-time or flex-time systems. The present work provides a wide range of health impacts of white-collar exemption, and will hopefully attract the attentions of decision-makers and those likely to be affected in order to contribute to policy-making.

The Intubating Laryngeal Mask Airway Allows Tracheal Intubation When the Cervical Spine Is Immobilized by a Rigid Collar

PubMed Central

Komatsu, Ryu; Nagata, Osamu; Kamata, Kotoe; Yamagata, Katsuyuki; Sessler, Daniel I.; Ozaki, Makoto

2005-01-01

Summary An intubating laryngeal mask airway (ILMA) facilitates tracheal intubation with the neck in neutral position, which is similar to the neck position maintained by a rigid cervical collar. However, a cervical collar virtually obliterates neck movement, even the small movements that normally facilitate airway insertion. We therefore tested the hypothesis that the ILMA facilitates tracheal intubation even in patients wearing a rigid cervical collar. In 50 cervical spine surgery patients with a rigid Philadelphia collar in place and 50 general surgery patients under general anaesthesia, we performed blind tracheal intubation via an ILMA. The time required for intubation, intubation success rate, and numbers and type of adjusting manoeuvres employed were recorded. Inter-incisor distance was significantly smaller (4.1 [0.8] cm vs. 4.6 [0.7] cm, mean [SD], P<0.01) and Mallampati scores were significantly greater (P<0.001) in the collared patients. ILMA insertion took longer (30 [25] vs. 22 [6] seconds), more patients required 2 insertion attempts (15 vs. 3; P<0.005), and ventilation adequacy with ILMA was worse (P<0.05) in collared patients. However, there were no significant differences between the collared and control patients in terms of total time required for intubation (60 [41] vs. 50 [30] seconds), number of intubation attempts, overall intubation success rate (96 vs. 98%), or the incidence of intubation complications. Blind intubation through an ILMA is thus a reasonable strategy for controlling the airway in patients who are immobilized with a rigid cervical collar, especially when urgency precludes a fiberoptic approach. PMID:15321932

An experimental investigation of pulsed laser-assisted machining of AISI 52100 steel

NASA Astrophysics Data System (ADS)

Panjehpour, Afshin; Soleymani Yazdi, Mohammad R.; Shoja-Razavi, Reza

2014-11-01

Grinding and hard turning are widely used for machining of hardened bearing steel parts. Laser-assisted machining (LAM) has emerged as an efficient alternative to grinding and hard turning for hardened steel parts. In most cases, continuous-wave lasers were used as a heat source to cause localized heating prior to material removal by a cutting tool. In this study, an experimental investigation of pulsed laser-assisted machining of AISI 52100 bearing steel was conducted. The effects of process parameters (i.e., laser mean power, pulse frequency, pulse energy, cutting speed and feed rate) on state variables (i.e., material removal temperature, specific cutting energy, surface roughness, microstructure, tool wear and chip formation) were investigated. At laser mean power of 425 W with frequency of 120 Hz and cutting speed of 70 m/min, the benefit of LAM was shown by 25% decrease in specific cutting energy and 18% improvement in surface roughness, as compared to those of the conventional machining. It was shown that at constant laser power, the increase of laser pulse energy causes the rapid increase in tool wear rate. Pulsed laser allowed efficient control of surface temperature and heat penetration in material removal region. Examination of the machined subsurface microstructure and microhardness profiles showed no change under LAM and conventional machining. Continuous chips with more uniform plastic deformation were produced in LAM.

48 CFR 22.1016 - Statement of equivalent rates for Federal hires.

Code of Federal Regulations, 2013 CFR

2013-10-01

... (General Schedule—white collar) and/or 5 U.S.C. 5341 (Wage Board—blue collar) were applicable. (b) Procedures for computation of these rates are as follows: (1) Wages paid blue collar employees shall be the...

48 CFR 22.1016 - Statement of equivalent rates for Federal hires.

Code of Federal Regulations, 2012 CFR

2012-10-01

... (General Schedule—white collar) and/or 5 U.S.C. 5341 (Wage Board—blue collar) were applicable. (b) Procedures for computation of these rates are as follows: (1) Wages paid blue collar employees shall be the...

48 CFR 22.1016 - Statement of equivalent rates for Federal hires.

Code of Federal Regulations, 2014 CFR

2014-10-01

... (General Schedule—white collar) and/or 5 U.S.C. 5341 (Wage Board—blue collar) were applicable. (b) Procedures for computation of these rates are as follows: (1) Wages paid blue collar employees shall be the...

The use of radio-collars for monitoring wildlife diseases: a case study from Iberian ibex affected by Sarcoptes scabiei in Sierra Nevada, Spain

PubMed Central

2013-01-01

Background Wildlife radio tracking has gained popularity during the recent past. Ecologists and conservationists use radio-collars for different purposes: animal movement monitoring, home range, productivity, population estimation, behaviour, habitat use, survival, and predator-prey interaction, among others. The aim of our present study is to highlight the application of radio-collars for wildlife diseases monitoring. The spread of wildlife diseases and the efficacy of management actions for controlling them propose serious challenges for ecologists and conservationists, since it is difficult to re-capture (or simply observe) the same animal in pre-determined temporal interval, but such difficulty is overcome by the use of gps-gsm radio collars. Methods In the present study we report, for the first time to our knowledge, the use of radio-collars in the monitoring of Iberian ibex affected by Sarcoptes scabiei in Sierra Nevada mountain range, Spain. Twenty-five moderate or slightly mangy animals were radio-collared between 2006 and 2013. Results The radio-collars allowed us to confirm the presence of resistance to S. scabiei within Iberian ibex population. Twenty (80%) of the collared animals recovered totally from mange, while the disease progressed in the other five Iberian ibex (20% of the collared animals) and the animals died. The average estimated recovery time of the resistant animals was 245 ± 277 days, and the estimated average survival time of the non-resistant Iberian ibex was 121 ± 71 days. Non-resistant animals survived at least 100 days, while all of them died with less than 200 days. Sixty per cent of the resistant animals were recovered with less than 200 days. Conclusions We report, for the first time, the successful use of radio collars for wildlife diseases monitoring using Iberian ibex/S. scabiei as a model. By using radio collars we documented that most of the Sarcoptes-infected Iberian ibex are resistant to this disease, and we estimated the average time for Iberian ibex recovering from mange infection and the average survival time of the non-resistant ones. We expect wider use of radio-collars for wild animals diseases monitoring, affected/not-affected animals interaction, and treatment efficacy, among others. PMID:23965311

Referred pain from myofascial trigger points in head, neck, shoulder, and arm muscles reproduces pain symptoms in blue-collar (manual) and white-collar (office) workers.

PubMed

Fernández-de-las-Peñas, César; Gröbli, Christian; Ortega-Santiago, Ricardo; Fischer, Christine Stebler; Boesch, Daniel; Froidevaux, Philippe; Stocker, Lilian; Weissmann, Richard; González-Iglesias, Javier

2012-07-01

To describe the prevalence and referred pain area of trigger points (TrPs) in blue-collar (manual) and white-collar (office) workers, and to analyze if the referred pain pattern elicited from TrPs completely reproduces the overall spontaneous pain pattern. Sixteen (62% women) blue-collar and 19 (75% women) white-collar workers were included in this study. TrPs in the temporalis, masseter, upper trapezius, sternocleidomastoid, splenius capitis, oblique capitis inferior, levator scapulae, scalene, pectoralis major, deltoid, infraspinatus, extensor carpi radialis brevis and longus, extensor digitorum communis, and supinator muscles were examined bilaterally (hyper-sensible tender spot within a palpable taut band, local twitch response with snapping palpation, and elicited referred pain pattern with palpation) by experienced assessors blinded to the participants' condition. TrPs were considered active when the local and referred pain reproduced any symptom and the patient recognized the pain as familiar. The referred pain areas were drawn on anatomic maps, digitized, and measured. Blue-collar workers had a mean of 6 (SD: 3) active and 10 (SD: 5) latent TrPs, whereas white-collar workers had a mean of 6 (SD: 4) active and 11 (SD: 6) latent TrPs (P>0.548). No significant differences in the distribution of active and latent TrPs in the analyzed muscles between groups were found. Active TrPs in the upper trapezius, infraspinatus, levator scapulae, and extensor carpi radialis brevis muscles were the most prevalent in both groups. Significant differences in referred pain areas between muscles (P<0.001) were found; pectoralis major, infraspinatus, upper trapezius, and scalene muscles showed the largest referred pain areas (P<0.01), whereas the temporalis, masseter, and splenius capitis muscles showed the smallest (P<0.05). The combination of the referred pain from TrPs reproduced the overall clinical pain area in all participants. Blue-collar and white-collar workers exhibited a similar number of TrPs in the upper quadrant musculature. The referred pain elicited by active TrPs reproduced the overall pain pattern. The distribution of TrPs was not significantly different between groups. Clinicians should examine for the presence of muscle TrPs in blue-collar and white-collar workers.

In vitro assessment of cutting efficiency and durability of zirconia removal diamond rotary instruments.

PubMed

Kim, Joon-Soo; Bae, Ji-Hyeon; Yun, Mi-Jung; Huh, Jung-Bo

2017-06-01

Recently, zirconia removal diamond rotary instruments have become commercially available for efficient cutting of zirconia. However, research of cutting efficiency and the cutting characteristics of zirconia removal diamond rotary instruments is limited. The purpose of this in vitro study was to assess and compare the cutting efficiency, durability, and diamond rotary instrument wear pattern of zirconia diamond removal rotary instruments with those of conventional diamond rotary instruments. In addition, the surface characteristics of the cut zirconia were assessed. Block specimens of 3 mol% yttrium cation-doped tetragonal zirconia polycrystal were machined 10 times for 1 minute each using a high-speed handpiece with 6 types of diamond rotary instrument from 2 manufacturers at a constant force of 2 N (n=5). An electronic scale was used to measure the lost weight after each cut in order to evaluate the cutting efficiency. Field emission scanning electron microscopy was used to evaluate diamond rotary instrument wear patterns and machined zirconia block surface characteristics. Data were statistically analyzed using the Kruskal-Wallis test, followed by the Mann-Whitney U test (α=.05). Zirconia removal fine grit diamond rotary instruments showed cutting efficiency that was reduced compared with conventional fine grit diamond rotary instruments. Diamond grit fracture was the most dominant diamond rotary instrument wear pattern in all groups. All machined zirconia surfaces were primarily subjected to plastic deformation, which is evidence of ductile cutting. Zirconia blocks machined with zirconia removal fine grit diamond rotary instruments showed the least incidence of surface flaws. Although zirconia removal diamond rotary instruments did not show improved cutting efficiency compared with conventional diamond rotary instruments, the machined zirconia surface showed smoother furrows of plastic deformation and fewer surface flaws. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Occupation is related to Weight and Lifestyle Factors among Employees at Worksites Involved in a Weight Gain Prevention Study

PubMed Central

Gans, Kim M.; Salkeld, Judith; Risica, Patricia Markham; Lenz, Erin; Burton, Deborah; Mello, Jennifer; Bell, Johanna P.

2015-01-01

Objective To examine the relationship between job type, weight status and lifestyle factors that are potential contributors to obesity including, diet, physical activity and perceived stress among employees enrolled in the Working on Wellness (WOW) project. Methods Randomly selected employees at 24 worksites completed a baseline survey (n=1700); some also an in-person survey and anthropometric measures (n=1568). Employees were classified by US Labor standards as: white collar (n=1297), blue collar (n=303), or service worker (n=92), 8 unknown. Associations were analyzed using Chi-Square, GLM procedures, and adjusted for demographics using Logistic Regression. Results In unadjusted models, BMI of service workers was higher than white collar workers; F&V intake was higher for service and blue collar than white collar; white collar workers reported highest stress levels in job and life. However, in models adjusted for demographics, the only significant difference was to physical activity (i.e., MET/min per week), with blue collar workers reporting higher levels of physical activity than service workers, who reported higher levels than the white collar workers. Conclusions Future research should further examine the relationship between health and job status to corroborate the results of the current study and to consider designing future worksite health promotion interventions that are tailored by job category. PMID:26461872

Occupation Is Related to Weight and Lifestyle Factors Among Employees at Worksites Involved in a Weight Gain Prevention Study.

PubMed

Gans, Kim M; Salkeld, Judith; Risica, Patricia Markham; Lenz, Erin; Burton, Deborah; Mello, Jennifer; Bell, Johanna P

2015-10-01

To examine the relationship between job type, weight status, and lifestyle factors that are potential contributors to obesity including, diet, physical activity (PA), and perceived stress among employees enrolled in the Working on Wellness project. Randomly selected employees at 24 worksites completed a baseline survey (n = 1700); some also an in-person survey and anthropometric measures (n = 1568). Employees were classified by US labor standards as white collar (n = 1297), blue collar (n = 303), or service worker (n = 92), and 8 unknown. Associations were analyzed using chi-square and general linear model procedures and adjusted for demographics using logistic regression. In unadjusted models, body mass index of service workers was higher than white collar workers; fruit and vegetable intake was higher for service and blue collar than white collar; white collar workers reported highest stress levels in job and life. Nevertheless, in models adjusted for demographics, the only significant difference was for PA (ie, metabolic equivalent [MET]/min/wk), with blue collar workers reporting higher levels of PA than service workers, who reported higher levels than the white collar workers. Future research should further examine the relationship between health and job status to corroborate the results of the current study and to consider designing future worksite health promotion interventions that are tailored by job category.

The method of attachment influences accelerometer-based activity data in dogs.

PubMed

Martin, Kyle W; Olsen, Anastasia M; Duncan, Colleen G; Duerr, Felix M

2017-02-10

Accelerometer-based activity monitoring is a promising new tool in veterinary medicine used to objectively assess activity levels in dogs. To date, it is unknown how device orientation, attachment method, and attachment of a leash to the collar holding an accelerometer affect canine activity data. It was our goal to evaluate whether attachment methods of accelerometers affect activity counts. Eight healthy, client-owned dogs were fitted with two identical neck collars to which two identical activity monitors were attached using six different methods of attachment. These methods of attachment evaluated the use of a protective case, positioning of the activity monitor and the tightness of attachment of the accelerometer. Lastly, the effect of leash attachment to the collar was evaluated. For trials where the effect of leash attachment to the collar was not being studied, the leash was attached to a harness. Activity data obtained from separate monitors within a given experiment were compared using Pearson correlation coefficients and across all experiments using the Kruskal-Wallis Test. There was excellent correlation and low variability between activity monitors on separate collars when the leash was attached to a harness, regardless of their relative positions. There was good correlation when activity monitors were placed on the same collar regardless of orientation. There were poor correlations between activity monitors in three experiments: when the leash was fastened to the collar that held an activity monitor, when one activity monitor was housed in the protective casing, and when one activity monitor was loosely zip-tied to the collar rather than threaded on using the provided metal loop. Follow-up, pair-wise comparisons identified the correlation associated with these three methods of attachment to be statistically different from the level of correlation when monitors were placed on separate collars. While accelerometer-based activity monitors are useful tools to objectively assess physical activity in dogs, care must be taken when choosing a method to attach the device. The attachment of the activity monitor to the collar should utilize a second, dedicated collar that is not used for leash attachment and the attachment method should remain consistent throughout a study period.

Mild Jugular Compression Collar Ameliorated Changes in Brain Activation of Working Memory after One Soccer Season in Female High School Athletes.

PubMed

Yuan, Weihong; Dudley, Jonathan; Barber Foss, Kim D; Ellis, Jonathan D; Thomas, Staci; Galloway, Ryan T; DiCesare, Christopher A; Leach, James L; Adams, Janet; Maloney, Thomas; Gadd, Brooke; Smith, David; Epstein, Jeff N; Grooms, Dustin R; Logan, Kelsey; Howell, David R; Altaye, Mekibib; Myer, Gregory D

2018-06-01

Recent neuroimaging studies have suggested that repetitive subconcussive head impacts, even after only one sport season, may lead to pre- to post-season structural and functional alterations in male high school football athletes. However, data on female athletes are limited. In the current investigation, we aimed to (1) assess the longitudinal pre- to post-season changes in functional MRI (fMRI) of working memory and working memory performance, (2) quantify the association between the pre- to post-season change in fMRI of working memory and the exposure to head impact and working memory performance, and (3) assess whether wearing a neck collar designed to reduce intracranial slosh via mild compression of the jugular veins can ameliorate the changes in fMRI brain activation observed in the female high school athletes who did not wear collars after a full soccer season. A total of 48 female high school soccer athletes (age range: 14.00-17.97 years) were included in the study. These athletes were assigned to the non-collar group (n = 21) or to the collar group (n = 27). All athletes undewent MRI at both pre-season and post-season. In each session, a fMRI verbal N-Back task was used to engage working memory. A significant pre- to post-season increase in fMRI blood oxygen level dependent (BOLD) signal was demonstrated when performing the N-back working memory task in the non-collar group but not in the collar group, despite the comparable exposure to head impacts during the season between the two groups. The collar group demonstrated significantly smaller pre- to post-season change in fMRI BOLD signal than the non-collar group, suggesting a potential protective effect from the collar device. Significant correlations were also found between the pre- to post-season increase in fMRI brain activation and the decrease in task accuracy in the non-collar group, indicating an association between the compensatory mechanism in underlying neurophysiology and the alteration in the behavioral outcomes.

Service Modules for Coal Extraction

NASA Technical Reports Server (NTRS)

Gangal, M. D.; Lewis, E. V.

1985-01-01

Service train follows group of mining machines, paying out utility lines as machines progress into coal face. Service train for four mining machines removes gases and coal and provides water and electricity. Flexible, coiling armored carriers protect cables and hoses. High coal production attained by arraying row of machines across face, working side by side.

Nondimensional parameter for conformal grinding: combining machine and process parameters

NASA Astrophysics Data System (ADS)

Funkenbusch, Paul D.; Takahashi, Toshio; Gracewski, Sheryl M.; Ruckman, Jeffrey L.

1999-11-01

Conformal grinding of optical materials with CNC (Computer Numerical Control) machining equipment can be used to achieve precise control over complex part configurations. However complications can arise due to the need to fabricate complex geometrical shapes at reasonable production rates. For example high machine stiffness is essential, but the need to grind 'inside' small or highly concave surfaces may require use of tooling with less than ideal stiffness characteristics. If grinding generates loads sufficient for significant tool deflection, the programmed removal depth will not be achieved. Moreover since grinding load is a function of the volumetric removal rate the amount of load deflection can vary with location on the part, potentially producing complex figure errors. In addition to machine/tool stiffness and removal rate, load generation is a function of the process parameters. For example by reducing the feed rate of the tool into the part, both the load and resultant deflection/removal error can be decreased. However this must be balanced against the need for part through put. In this paper a simple model which permits combination of machine stiffness and process parameters into a single non-dimensional parameter is adapted for a conformal grinding geometry. Errors in removal can be minimized by maintaining this parameter above a critical value. Moreover, since the value of this parameter depends on the local part geometry, it can be used to optimize process settings during grinding. For example it may be used to guide adjustment of the feed rate as a function of location on the part to eliminate figure errors while minimizing the total grinding time required.

Quantitative assessment of the enamel machinability in tooth preparation with dental diamond burs.

PubMed

Song, Xiao-Fei; Jin, Chen-Xin; Yin, Ling

2015-01-01

Enamel cutting using dental handpieces is a critical process in tooth preparation for dental restorations and treatment but the machinability of enamel is poorly understood. This paper reports on the first quantitative assessment of the enamel machinability using computer-assisted numerical control, high-speed data acquisition, and force sensing systems. The enamel machinability in terms of cutting forces, force ratio, cutting torque, cutting speed and specific cutting energy were characterized in relation to enamel surface orientation, specific material removal rate and diamond bur grit size. The results show that enamel surface orientation, specific material removal rate and diamond bur grit size critically affected the enamel cutting capability. Cutting buccal/lingual surfaces resulted in significantly higher tangential and normal forces, torques and specific energy (p<0.05) but lower cutting speeds than occlusal surfaces (p<0.05). Increasing material removal rate for high cutting efficiencies using coarse burs yielded remarkable rises in cutting forces and torque (p<0.05) but significant reductions in cutting speed and specific cutting energy (p<0.05). In particular, great variations in cutting forces, torques and specific energy were observed at the specific material removal rate of 3mm(3)/min/mm using coarse burs, indicating the cutting limit. This work provides fundamental data and the scientific understanding of the enamel machinability for clinical dental practice. Copyright © 2014 Elsevier Ltd. All rights reserved.

Companies Agree to Stop Selling Pet Collars Containing Pesticide to Protect Children

EPA Pesticide Factsheets

Sergeant's Pet Care Products, Inc. and Wellmark International have agreed to stop producing pet collars containing the pesticide propoxur. This decision resulted from discussions about how to reduce children’s exposure to propoxur in pet collars.

Simulation and Experimental Study on Surface Formation Mechanism in Machining of SiCp/Al Composites

NASA Astrophysics Data System (ADS)

Du, Jinguang; Zhang, Haizhen; He, Wenbin; Ma, Jun; Ming, Wuyi; Cao, Yang

2018-03-01

To intuitively reveal the surface formation mechanism in machining of SiCp/Al composites, in this paper the removal mode of reinforced particle and aluminum matrix, and their influence on surface formation mechanism were analyzed by single diamond grit cutting simulation and single diamond grit scratch experiment. Simulation and experiment results show that when the depth of cut is small, the scratched surface of the workpiece is relatively smooth; however, there are also irregular pits on the machined surface. When increasing the depth of cut, there are many obvious laminar structures on the scratched surface, and the surface appearance becomes coarser. When the cutting speed is small, the squeezing action of abrasive grit on SiC particles plays a dominant role in the extrusion of SiC particles. When increasing the cutting speed, SiC particles also occur broken or fractured; but the machined surface becomes smooth. When machining SiCp/Al composites, the SiC may happen in such removal ways, such as fracture, debonding, broken, sheared, pulled into and pulled out, etc. By means of reasonably developing micro cutting finite element simulation model of SiCp/Al composites could be used to analyze the surface formation process and particle removal way in different machining conditions.

A general model for the analysis of mark-resight, mark-recapture, and band-recovery data under tag loss

USGS Publications Warehouse

Conn, P.B.; Kendall, W.L.; Samuel, M.D.

2004-01-01

Estimates of waterfowl demographic parameters often come from resighting studies where birds fit with individually identifiable neck collars are resighted at a distance. Concerns have been raised about the effects of collar loss on parameter estimates, and the reliability of extrapolating from collared individuals to the population. Models previously proposed to account for collar loss do not allow survival or harvest parameters to depend on neck collar presence or absence. Also, few models have incorporated recent advances in mark-recapture theory that allow for multiple states or auxiliary encounters such as band recoveries. We propose a multistate model for tag loss in which the presence or absence of a collar is considered as a state variable. In this framework, demographic parameters are corrected for tag loss and questions related to collar effects on survival and recovery rates can be addressed. Encounters of individuals between closed sampling periods also can be incorporated in the analysis. We discuss data requirements for answering questions related to tag loss and sampling designs that lend themselves to this purpose. We illustrate the application of our model using a study of lesser snow geese (Chen caerulescens caerulescens).

Strategies of employees in the construction industry to increase their sustainable employability.

PubMed

Tonnon, Susanne C; van der Veen, Rozan; de Kruif, Anja Th C M; Robroek, Suzan J W; van der Ploeg, Hidde P; Proper, Karin I; van der Beek, Allard J

2018-01-01

The aging work force makes sustainable employability (SE) of workers a priority. However, it is unknown to what extent employees use implemented SE measures. To determine the utilization of 1) SE measures offered by employers, 2) employee SE strategies, and 3) to identify barriers and facilitators of SE strategies. Survey data were collected among 731 blue collar and 879 white collar workers to determine the utilization of employer SE measures. Focus groups were held with 16 blue collar and 17 white collar workers to identify employee SE strategies and their barriers and facilitators. Utilization of employer SE measures was highest for personal development measures. Strategies applied by blue collar workers included using equipment, suggesting improvements of their working conditions, and seeking promotion to a less physically demanding job. White collar workers named engaging in leisure time physical activity and seeking an adequate work-life balance. Implementation of these strategies was influenced by employee awareness and self-efficacy, the accessibility and costs and benefits of the strategy, management support and company culture. Usage of employer SE measures was generally low and recommendations are given for both blue and white collar workers to improve SE strategies.

Design and implementation of a system for laser assisted milling of advanced materials

NASA Astrophysics Data System (ADS)

Wu, Xuefeng; Feng, Gaocheng; Liu, Xianli

2016-09-01

Laser assisted machining is an effective method to machine advanced materials with the added benefits of longer tool life and increased material removal rates. While extensive studies have investigated the machining properties for laser assisted milling(LAML), few attempts have been made to extend LAML to machining parts with complex geometric features. A methodology for continuous path machining for LAML is developed by integration of a rotary and movable table into an ordinary milling machine with a laser beam system. The machining strategy and processing path are investigated to determine alignment of the machining path with the laser spot. In order to keep the material removal temperatures above the softening temperature of silicon nitride, the transformation is coordinated and the temperature interpolated, establishing a transient thermal model. The temperatures of the laser center and cutting zone are also carefully controlled to achieve optimal machining results and avoid thermal damage. These experiments indicate that the system results in no surface damage as well as good surface roughness, validating the application of this machining strategy and thermal model in the development of a new LAML system for continuous path processing of silicon nitride. The proposed approach can be easily applied in LAML system to achieve continuous processing and improve efficiency in laser assisted machining.

Ion beam figuring of highly steep mirrors with a 5-axis hybrid machine tool

NASA Astrophysics Data System (ADS)

Yin, Xiaolin; Tang, Wa; Hu, Haixiang; Zeng, Xuefeng; Wang, Dekang; Xue, Donglin; Zhang, Feng; Deng, Weijie; Zhang, Xuejun

2018-02-01

Ion beam figuring (IBF) is an advanced and deterministic method for optical mirror surface processing. The removal function of IBF varies with the different incident angles of ion beam. Therefore, for the curved surface especially the highly steep one, the Ion Beam Source (IBS) should be equipped with 5-axis machining capability to remove the material along the normal direction of the mirror surface, so as to ensure the stability of the removal function. Based on the 3-RPS parallel mechanism and two dimensional displacement platform, a new type of 5-axis hybrid machine tool for IBF is presented. With the hybrid machine tool, the figuring process of a highly steep fused silica spherical mirror is introduced. The R/# of the mirror is 0.96 and the aperture is 104mm. The figuring result shows that, PV value of the mirror surface error is converged from 121.1nm to32.3nm, and RMS value 23.6nm to 3.4nm.

Gold-Collar Workers. ERIC Digest.

ERIC Educational Resources Information Center

Wonacott, Michael E.

The gold-collar worker has problem-solving abilities, creativity, talent, and intelligence; performs non-repetitive and complex work difficult to evaluate; and prefers self management. Gold-collar information technology workers learn continually from experience; recognize the synergy of teams; can demonstrate leadership; and are strategic thinkers…

Radio-triggered anesthetic-dart collar for recapturing large mammals

USGS Publications Warehouse

Mech, L.D.; Chapman, R.C.; Cochran, W.W.; Simmons, L.; Seal, U.S.

1984-01-01

A re-usable, radio-triggered, anesthetic-dart collar costing about $1,200 has been developed for recapturing large, free-ranging mammals. The collar was tested successfully on captive gray wolves, white-tailed deer, a mountain lion, a black bear, and a tiger, and on wild wolves, a bear, and deer after periods of up to 32 days. The main advantage of the capture collar is that it allows frequent recapture of individuals at will and thus enhances opportunities for new physiological monitoring of wild animals.

Male-male competition and parental care in collared flycatchers (Ficedula albicollis): an experiment controlling for differences in territory quality.

PubMed

Qvarnström, A; Grifffith, S C; Gustafsson, L

2000-12-22

Females are known to benefit from mate choice in several different ways but the relationship between these benefits has received little attention. The quality of resources provided by males, such as nest sites, and paternal care are often assumed to covary positively However, because the location of the nest affects the cost of parental care, these two benefits from mate choice can easily be confounded. To investigate the provisioning ability of successful competitors while controlling for differences in territory quality we removed early-settled pairs of collared flycatchers (Ficedula albicollis) and allowed replacement by later-arriving males or floaters (i.e.'poor competitors'). A control group of early-settled males (i.e. 'good competitors') had their females removed. Females paired to good competitors enjoyed a significantly higher reproductive success and tended to receive more parental assistance from their mates compared with females mated to poor competitors. Thus, some males seem able not only to compete successfully over resources but also to feed their offspring at a relatively higher rate. An alternative explanation, that poor competitors invested less in offspring quality in response to a lower share of paternity, could be rejected. The rate of extra-pair paternity did not differ between the two treatment groups. Our results suggest that male- male competition can sometimes facilitate female choice of superior care-givers. Thus, a female's benefit from choosing a competitive male may not be restricted to the quality of the resource he defends but can also include superior paternal care.

Three job stress models and their relationship with musculoskeletal pain in blue- and white-collar workers.

PubMed

Herr, Raphael M; Bosch, Jos A; Loerbroks, Adrian; van Vianen, Annelies E M; Jarczok, Marc N; Fischer, Joachim E; Schmidt, Burkhard

2015-11-01

Musculoskeletal pain has been found to co-occur with psychosocial job stress. However, different conceptualizations of job stress exist, each emphasizing different aspects of the work environment, and it is unknown which of these aspects show the strongest associations with musculoskeletal pain. Further, these associations may differ for white-collar vs. blue-collar job types, but this has not been tested. The present study examined the independent and combined contributions of Effort-RewardImbalance (ERI), Job-Demand-Control (JDC) and Organizational Justice (OJ) to musculoskeletal pain symptoms among white- and blue-collar workers. Participants of a cross-sectional study (n=1634) completed validated questionnaires measuring ERI, JDC, and OJ, and reported the frequency of pain during the previous year at four anatomical locations (lower back, neck or shoulder, arms and hands, and knees/feet). Pain reports were summarized into a single musculoskeletal symptom score (MSS). Analyses were stratified for white- and blue-collar workers. Among white-collar workers, ERI and OJ were independently associated with MSS. In addition to these additive effects, significant 2-way and 3-way interactions indicated a synergistic effect of job stressors in relation to reported pain. In blue-collar workers, ERI and JDC independently associated with MSS, and a significant 3-way interaction was observed showing that the combination of job stressors exceeded an additive effect. ERI influences pain symptoms in both occupational groups. OJ was independent significant predictor only among white-collar workers, whereas JDC had additive predictive utility exclusively among blue-collar workers. Simultaneous exposure to multiple job stress factors appeared to synergize pain symptom reporting. Copyright © 2015. Published by Elsevier Inc.

Sickness benefit cuts mainly affect blue-collar workers.

PubMed

Aaviksoo, E; Kiivet, R-A

2014-08-01

To analyse the impact of sick-pay cuts on the use of sickness absence by employees of different socioeconomic groups. In 2009 cuts in sick pay were implemented in reaction to an economic crisis in Estonia. Nationwide health survey data from the years 2004, 2006, 2008, and 2010 were used to evaluate sickness absence among blue-collar and white-collar workers. The dataset comprised 7,449 employees of 20-64 years of age. Difference in prevalence of absentees before and after the reform was assessed using the chi-squared test. Odds ratios (OR) for sickness absence were calculated in a multivariate logistic regression model. After the reform, the proportion of blue-collar workers who had been on sick leave decreased from 51% to 40% (p<0.001) and among white-collar employees from 45% to 41% (p=0.026). This reduction had a similar pattern in all the subgroups of blue-collar employees as stratified according to gender, age, self-rated health, and presence of chronic disease, especially among those with low incomes; in white-collar employees it reached statistical significance only in those with good self-rated health (p=0.033). In a multivariate model the odds of having lower sickness absence were highly significant only in blue-collar employees (OR 0.63; 95% confidence interval 0.51-0.77, p<0.001). The cuts in sickness benefits had a major impact on the use of sickness absence by blue-collar employees with low salaries. This indicates that lower income was a major factor hindering the use of sick leave as these employees are most vulnerable to the loss of income. © 2014 the Nordic Societies of Public Health.

Automatic EEG artifact removal: a weighted support vector machine approach with error correction.

PubMed

Shao, Shi-Yun; Shen, Kai-Quan; Ong, Chong Jin; Wilder-Smith, Einar P V; Li, Xiao-Ping

2009-02-01

An automatic electroencephalogram (EEG) artifact removal method is presented in this paper. Compared to past methods, it has two unique features: 1) a weighted version of support vector machine formulation that handles the inherent unbalanced nature of component classification and 2) the ability to accommodate structural information typically found in component classification. The advantages of the proposed method are demonstrated on real-life EEG recordings with comparisons made to several benchmark methods. Results show that the proposed method is preferable to the other methods in the context of artifact removal by achieving a better tradeoff between removing artifacts and preserving inherent brain activities. Qualitative evaluation of the reconstructed EEG epochs also demonstrates that after artifact removal inherent brain activities are largely preserved.

A case control study: White-collar defendants compared with defendants charged with other nonviolent theft.

PubMed

Poortinga, Ernest; Lemmen, Craig; Jibson, Michael D

2006-01-01

We examined the clinical, criminal, and sociodemographic characteristics of all white-collar crime defendants referred to the evaluation unit of a state center for forensic psychiatry. With 29,310 evaluations in a 12-year period, we found 70 defendants charged with embezzlement, 3 with health care fraud, and no other white-collar defendants (based on the eight crimes widely accepted as white-collar offenses). In a case-control study design, the 70 embezzlement cases were compared with 73 defendants charged with other forms of nonviolent theft. White-collar defendants were found to have a higher likelihood of white race (adjusted odds ratio (adj. OR) = 4.51), more years of education (adj. OR = 3471), and a lower likelihood of substance abuse (adj. OR = .28) than control defendants. Logistic regression modeling showed that the variance in the relationship between unipolar depression and white-collar crime was more economically accounted for by education, race, and substance abuse.

Occupational psychosocial hazards among the emerging U.S. green collar workforce

PubMed Central

Fernandez, Cristina A.; Moore, Kevin; McClure, Laura A.; Caban-Martinez, Alberto J.; LeBlanc, William G.; Fleming, Lora E.; Cifuentes, Manuel; Lee, David J.

2016-01-01

Objective To compare occupational psychosocial hazards in green collar versus non-green collar workers. Methods Standard Occupational Classification codes were used to link the 2010 National Health Interview Survey to the 2010 Occupational Information Network Database. Multivariable logistic regressions were used to predict job insecurity, work-life imbalance, and workplace harassment in green versus non-green collar workers. Results Most participants were white, non-Hispanic, 25–64 years of age, and obtained greater than a high school education. The majority reported not being harassed at work, no work-life imbalance, and no job insecurity. Relative to non-green collar workers (n=12,217), green collar workers (n=2,588) were more likely to report job insecurity (OR=1.13; 95% CI=1.02–1.26) and work-life imbalance (1.19; 1.05–1.35), but less likely to experience workplace harassment (0.77; 0.62–0.95). Conclusions Continuous surveillance of occupational psychosocial hazards is recommended in this rapidly emerging workforce. PMID:28045790

Occupational Psychosocial Hazards Among the Emerging US Green Collar Workforce.

PubMed

Fernandez, Cristina A; Moore, Kevin; McClure, Laura A; Caban-Martinez, Alberto J; LeBlanc, William G; Fleming, Lora E; Cifuentes, Manuel; Lee, David J

2017-01-01

To compare occupational psychosocial hazards in green collar versus non-green collar workers. Standard Occupational Classification codes were used to link the 2010 National Health Interview Survey to the 2010 Occupational Information Network Database. Multivariable logistic regressions were used to predict job insecurity, work life imbalance, and workplace harassment in green versus non-green collar workers. Most participants were white, non-Hispanic, 25 to 64 years of age, and obtained greater than a high school education. The majority of workers reported no job insecurity, work life imbalance, or workplace harassment. Relative to non-green collar workers (n = 12,217), green collar workers (n = 2,588) were more likely to report job insecurity (Odds ratio [OR] = 1.13; 95% confidence interval [CI] = 1.02 to 1.26) and work life imbalance (1.19; 1.05 to 1.35), but less likely to experience workplace harassment (0.77; 0.62 to 0.95). Continuous surveillance of occupational psychosocial hazards is recommended in this rapidly emerging workforce.

Discovery of a second population of white-collared seedeaters, Sporophila torqueola (Passeriformes: emberizidae) along the Rio Grande of Texas

USGS Publications Warehouse

Woodin, Marc C.; Skoruppa, Mary K.; Blacklock, Gene W.; Hickman, Graham C.

1999-01-01

The range of the white-collared seedeater (Sporophila torqueola), a tropical grassland species, extends from Central America northward along both coasts of Mexico (Eitniear, 1997), including Tamaulipas and Nuevo Leon (Howell and Webb, 1995). White-collared seedeaters historically occurred commonly in extreme southern Texas (Oberholser, 1974; Rappole and Blacklock, 1994). However, since about 1950, white-collared seedeaters have undergone a precipitous decline in south Texas. Studies during 1994-1996 identified only seven to nine breeding pairs in the only population known to occur in Texas, located ca. 55 km downriver of Laredo, Texas, in Zapata Co. (Eitniear, 1997). Outside of the historical range, very few records are documented. Oberholser (1974) reported that three white-collared seed- eater specimens were collected in 1948 in Webb Co., northwest of Laredo, and Arnold (1980) also collected a white-collared seedeater in Webb Co. Vagrants also have been sighted as far afield as Corpus Christi (Blacklock, 1964), ca. 200 km north of the Rio Grande (Fig. 1).

The synergistic action of imidacloprid and flumethrin and their release kinetics from collars applied for ectoparasite control in dogs and cats

PubMed Central

2012-01-01

Background The control of tick and flea burdens in dogs and cats has become essential to the control of important and emerging vector borne diseases, some of which are zoonoses. Flea worry and flea bite hypersensitivity are additionally a significant disease entity in dogs and cats. Owner compliance in maintaining the pressure of control measures has been shown to be poor. For these reasons efforts are continuously being made to develop ectoparasiticides and application methods that are safe, effective and easy to apply for pet owners. A new polymer matrix collar has recently been developed which is registered for 8 months use in cats and dogs. The basic properties of this collar have been investigated in several in vitro and in vivo studies. Methods The effects of imidacloprid, flumethrin and the combination were evaluated in vitro by means of whole cell voltage clamp measurement experiments conducted on isolated neuron cells from Spodoptera frugiperda. The in vitro efficacy of the two compounds and the combination against three species of ticks and their life stages and fleas were evaluated in a dry surface glass vial assay. The kinetics of the compounds over time in the collar were evaluated by the change in mass of the collar and measurement of the surface concentrations and concentrations of the actives in the collar matrix by HPLC. Hair clipped from collar treated dogs and cats, collected at various time points, was used to assess the acaricidal efficacy of the actives ex vivo. Results An in vitro isolated insect nerve model demonstrated the synergistic neurotoxic effects of the pyrethroid flumethrin and the neonicotinoid imidacloprid. An in vitro glass vial efficacy and mortality study against various life stages of the ticks Ixodes ricinus, Rhipicephalus sanguineus and Dermacentor reticulatus and against the flea (Ctenocephalides felis) demonstrated that the combination of these products was highly effective against these parasites. The release kinetics of these actives from a neck collar (compounded with 10% imidacloprid and 4.5% flumethrin) was extensively studied in dogs and cats under laboratory and field conditions. Acaricidal concentrations of the actives were found to be consistently released from the collar matrix for 8 months. None of the collar studies in dogs or cats were associated with any significant collar related adverse event. Conclusion Here we demonstrated the synergism between the pyrethroid flumethrin and the neonicotinoid imidacloprid, both provided in therapeutically relevant doses by a slow release collar matrix system over 8 months. This collar is therefore a convenient and safe tool for a long-term protection against ectoparasites. PMID:22498105

Machine for applying a two component resin to a roadway surface

DOEpatents

Huszagh, Donald W.

1985-01-01

A portable machine for spraying two component resins onto a roadway, the machine having a pneumatic control system, including apparatus for purging the machine of mixed resin with air and then removing remaining resin with solvent. Interlocks prevent contamination of solvent and resin, and mixed resin can be purged in the event of a power failure.

Machine for applying a two component resin to a roadway surface

DOEpatents

Huszagh, D.W.

1984-01-01

A portable machine for spraying two component resins onto a roadway, the machine having a pneumatic control system, including means for purging the machine of mixed resin with air and then removing remaining resin with solvent. Interlocks prevent contamination of solvent and resin, and mixed resin can be purged in the event of a power failure.

Ion beam machining error control and correction for small scale optics.

PubMed

Xie, Xuhui; Zhou, Lin; Dai, Yifan; Li, Shengyi

2011-09-20

Ion beam figuring (IBF) technology for small scale optical components is discussed. Since the small removal function can be obtained in IBF, it makes computer-controlled optical surfacing technology possible to machine precision centimeter- or millimeter-scale optical components deterministically. Using a small ion beam to machine small optical components, there are some key problems, such as small ion beam positioning on the optical surface, material removal rate, ion beam scanning pitch control on the optical surface, and so on, that must be seriously considered. The main reasons for the problems are that it is more sensitive to the above problems than a big ion beam because of its small beam diameter and lower material ratio. In this paper, we discuss these problems and their influences in machining small optical components in detail. Based on the identification-compensation principle, an iterative machining compensation method is deduced for correcting the positioning error of an ion beam with the material removal rate estimated by a selected optimal scanning pitch. Experiments on ϕ10 mm Zerodur planar and spherical samples are made, and the final surface errors are both smaller than λ/100 measured by a Zygo GPI interferometer.

Augmenting the osseointegration of endoprostheses using laser-sintered porous collars: an in vivo study.

PubMed

Mumith, A; Coathup, M; Chimutengwende-Gordon, M; Aston, W; Briggs, T; Blunn, G

2017-02-01

Massive endoprostheses rely on extra-cortical bone bridging (ECBB) to enhance fixation. The aim of this study was to investigate the role of selective laser sintered (SLS) porous collars in augmenting the osseointegration of these prostheses. The two novel designs of porous SLS collars, one with small pores (Ø700 μm, SP) and one with large pores (Ø1500 μm, LP), were compared in an ovine tibial diaphyseal model. Osseointegration of these collars was compared with that of a clinically used solid, grooved design (G). At six months post-operatively, the ovine tibias were retrieved and underwent radiological and histological analysis. Porous collars provided a significantly greater surface (p < 0.001) for the ingrowth of bone than the standard grooved design. Significantly greater extracortical pedicle formation was seen radiologically around the grooved design (length p = 0.002, thickness p < 0.001, surface area p = 0.002) than around the porous collars. However, the ingrowth of bone occurred from the transection site into the porous structure of both types of collar. A fivefold increase in integration was seen with the SP and a threefold increase in the LP design when compared with G (p < 0.001). SLS porous collars allow the direct ingrowth of more bone and are better than current designs which rely on surface ongrowth and ECBB. Cite this article: Bone Joint J 2017;99-B:276-82. ©2017 The British Editorial Society of Bone & Joint Surgery.

Automatic feed system for ultrasonic machining

DOEpatents

Calkins, Noel C.

1994-01-01

Method and apparatus for ultrasonic machining in which feeding of a tool assembly holding a machining tool toward a workpiece is accomplished automatically. In ultrasonic machining, a tool located just above a workpiece and vibrating in a vertical direction imparts vertical movement to particles of abrasive material which then remove material from the workpiece. The tool does not contact the workpiece. Apparatus for moving the tool assembly vertically is provided such that it operates with a relatively small amount of friction. Adjustable counterbalance means is provided which allows the tool to be immobilized in its vertical travel. A downward force, termed overbalance force, is applied to the tool assembly. The overbalance force causes the tool to move toward the workpiece as material is removed from the workpiece.

Ultrasonic Abrasive Removal Of EDM Recast

NASA Technical Reports Server (NTRS)

Mandel, Johnny L.; Jacobson, Marlowe S.

1990-01-01

Ultrasonic abrasive process removes layer of recast material generated during electrical-discharge machining (EDM) of damper pocket on turbine blade. Form-fitted tool vibrated ultrasonically in damper pocket from which material removed. Vibrations activate abrasive in pocket. Amount of material removed controlled precisely.

Documentation for the machine-readable version of the Uppsala general catalogue of galaxies

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1982-01-01

The machine-readable version of the catalog containing descriptions of galaxies, their surrounding areas, and position angles for flattened galaxies is described. In addition to the correction of several errors discovered in a previous computerized version, a few duplicate records were removed and the record structure was revised slightly to accommodate a large data value and to remove superfluous blanks.

30 CFR 18.54 - High-voltage continuous mining machines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and Design Requirements § 18.54 High-voltage continuous mining machines. (a) Separation of high... removed. (c) Circuit-interrupting devices. Circuit-interrupting devices must be designed and installed to... ground. (e) Onboard ungrounded, three-phase power circuit. A continuous mining machine designed with an...

30 CFR 18.54 - High-voltage continuous mining machines.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and Design Requirements § 18.54 High-voltage continuous mining machines. (a) Separation of high... removed. (c) Circuit-interrupting devices. Circuit-interrupting devices must be designed and installed to... ground. (e) Onboard ungrounded, three-phase power circuit. A continuous mining machine designed with an...

30 CFR 18.54 - High-voltage continuous mining machines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and Design Requirements § 18.54 High-voltage continuous mining machines. (a) Separation of high... removed. (c) Circuit-interrupting devices. Circuit-interrupting devices must be designed and installed to... ground. (e) Onboard ungrounded, three-phase power circuit. A continuous mining machine designed with an...

30 CFR 18.54 - High-voltage continuous mining machines.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and Design Requirements § 18.54 High-voltage continuous mining machines. (a) Separation of high... removed. (c) Circuit-interrupting devices. Circuit-interrupting devices must be designed and installed to... ground. (e) Onboard ungrounded, three-phase power circuit. A continuous mining machine designed with an...

30 CFR 18.54 - High-voltage continuous mining machines.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and Design Requirements § 18.54 High-voltage continuous mining machines. (a) Separation of high... removed. (c) Circuit-interrupting devices. Circuit-interrupting devices must be designed and installed to... ground. (e) Onboard ungrounded, three-phase power circuit. A continuous mining machine designed with an...

75 FR 54912 - Drill Pipe and Drill Collars From China

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-09

...)] Drill Pipe and Drill Collars From China AGENCY: United States International Trade Commission. ACTION... retarded, by reason of subsidized and less-than-fair-value imports from China of drill pipe and drill... defined the subject merchandise as steel drill pipe, and steel drill collars, whether or not conforming to...

78 FR 4167 - Certain Electronic Bark Control Collars; Notice of Receipt of Complaint; Solicitation of Comments...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-18

... INTERNATIONAL TRADE COMMISSION [Docket No. 2932] Certain Electronic Bark Control Collars; Notice.... International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that the U.S. International Trade Commission has received a complaint entitled Certain Electronic Bark Control Collars, DN 2932; the...

Sphaeropsis Collar Rot of Red and Jack Pines

Treesearch

Glen Stanosz; Linda Haugen; Joseph O' Brien

2002-01-01

Sphaeropsis collar rot has been detected in red and jack pines in Wisconsin and Michigan, and it could be affecting pines in other states. This disease may be less familiar than Sphaeropsis shoot blight, but both the incidence and the distribution of collar rot appear to be increasing.

Shoe collar height effect on athletic performance, ankle joint kinematics and kinetics during unanticipated maximum-effort side-cutting performance.

PubMed

Lam, Gilbert Wing Kai; Park, Eun Jung; Lee, Ki-Kwang; Cheung, Jason Tak-Man

2015-01-01

Side-step cutting manoeuvres comprise the coordination between planting and non-planting legs. Increased shoe collar height is expected to influence ankle biomechanics of both legs and possibly respective cutting performance. This study examined the shoe collar height effect on kinematics and kinetics of planting and non-planting legs during an unanticipated side-step cutting. Fifteen university basketball players performed maximum-effort side-step cutting to the left 45° direction or a straight ahead run in response to a random light signal. Seven successful cutting trials were collected for each condition. Athletic performance, ground reaction force, ankle kinematics and kinetics of both legs were analysed using paired t-tests. Results indicated that high-collar shoes resulted in less ankle inversion and external rotation during initial contact for the planting leg. The high-collar shoes also exhibited a smaller ankle range of motion in the sagittal and transverse planes for both legs, respectively. However, no collar effect was found for ankle moments and performance indicators including cutting performance time, ground contact time, propulsion ground reaction forces and impulses. These findings indicated that high-collar shoes altered ankle positioning and restricted ankle joint freedom movements in both legs, while no negative effect was found for athletic cutting performance.

Machinability of cast commercial titanium alloys.

PubMed

Watanabe, I; Kiyosue, S; Ohkubo, C; Aoki, T; Okabe, T

2002-01-01

This study investigated the machinability of cast orthopedic titanium (metastable beta) alloys for possible application to dentistry and compared the results with those of cast CP Ti, Ti-6Al-4V, and Ti-6Al-7Nb, which are currently used in dentistry. Machinability was determined as the amount of metal removed with the use of an electric handpiece and a SiC abrasive wheel turning at four different rotational wheel speeds. The ratios of the amount of metal removed and the wheel volume loss (machining ratio) were also evaluated. Based on these two criteria, the two alpha + beta alloys tested generally exhibited better results for most of the wheel speeds compared to all the other metals tested. The machinability of the three beta alloys employed was similar or worse, depending on the speed of the wheel, compared to CP Ti. Copyright 2002 Wiley Periodicals, Inc.

A comparative study of electrochemical machining process parameters by using GA and Taguchi method

NASA Astrophysics Data System (ADS)

Soni, S. K.; Thomas, B.

2017-11-01

In electrochemical machining quality of machined surface strongly depend on the selection of optimal parameter settings. This work deals with the application of Taguchi method and genetic algorithm using MATLAB to maximize the metal removal rate and minimize the surface roughness and overcut. In this paper a comparative study is presented for drilling of LM6 AL/B4C composites by comparing the significant impact of numerous machining process parameters such as, electrolyte concentration (g/l),machining voltage (v),frequency (hz) on the response parameters (surface roughness, material removal rate and over cut). Taguchi L27 orthogonal array was chosen in Minitab 17 software, for the investigation of experimental results and also multiobjective optimization done by genetic algorithm is employed by using MATLAB. After obtaining optimized results from Taguchi method and genetic algorithm, a comparative results are presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qiusheng, Y., E-mail: qsyan@gdut.edu.cn; Senkai, C., E-mail: senkite@sina.com; Jisheng, P., E-mail: panjisheng@gdut.edu.cn

Different machining processes were used in the single crystal SiC wafer machining. SEM was used to observe the surface morphology and a cross-sectional cleavages microscopy method was used for subsurface cracks detection. Surface and subsurface cracks characteristics of single crystal SiC wafer in abrasive machining were analysed. The results show that the surface and subsurface cracks system of single crystal SiC wafer in abrasive machining including radial crack, lateral crack and the median crack. In lapping process, material removal is dominated by brittle removal. Lots of chipping pits were found on the lapping surface. With the particle size becomes smaller,more » the surface roughness and subsurface crack depth decreases. When the particle size was changed to 1.5µm, the surface roughness Ra was reduced to 24.0nm and the maximum subsurface crack was 1.2µm. The efficiency of grinding is higher than lapping. Plastic removal can be achieved by changing the process parameters. Material removal was mostly in brittle fracture when grinding with 325# diamond wheel. Plow scratches and chipping pits were found on the ground surface. The surface roughness Ra was 17.7nm and maximum subsurface crack depth was 5.8 µm. When grinding with 8000# diamond wheel, the material removal was in plastic flow. Plastic scratches were found on the surface. A smooth surface of roughness Ra 2.5nm without any subsurface cracks was obtained. Atomic scale removal was possible in cluster magnetorheological finishing with diamond abrasive size of 0.5 µm. A super smooth surface eventually obtained with a roughness of Ra 0.4nm without any subsurface crack.« less

Comparison of subsurface damages on mono-crystalline silicon between traditional nanoscale machining and laser-assisted nanoscale machining via molecular dynamics simulation

NASA Astrophysics Data System (ADS)

Dai, Houfu; Li, Shaobo; Chen, Genyu

2018-01-01

Molecular dynamics is employed to compare nanoscale traditional machining (TM) with laser-assisted machining (LAM). LAM is that the workpiece is locally heated by an intense laser beam prior to material removal. We have a comprehensive comparison between LAM and TM in terms of atomic trajectories, phase transformation, radial distribution function, chips, temperature distribution, number of atoms in different temperature, grinding temperature, grinding force, friction coefficient and atomic potential energy. It can be found that there is a decrease of atoms with five and six nearest neighbors, and LAM generates more chips than that in the TM. It indicates that LAM reduces the subsurface damage of workpiece, gets a better-qualified ground surface and improves the material removal rate. Moreover, laser energy makes the materials fully softened before being removed, the number of atoms with temperature above 500 K is increased, and the average temperature of workpiece higher and faster to reach the equilibrium in LAM. It means that LAM has an absolute advantage in machining materials and greatly reduces the material resistance. Not only the tangential force (Fx) and the normal force (Fy) but also friction coefficients become smaller as laser heating reduces the strength and hardness of the material in LAM. These results show that LAM is a promising technique since it can get a better-qualified workpiece surface with larger material removal rates, less grinding force and lower friction coefficient.

Uses of the Westrup brush machine

Treesearch

Jill Barbour

2002-01-01

The Westrup brush machine can be used as the first step in the conditioning process of seeds. Even though there are various sizes of the machine, only the laboratory model (LA-H) is described. The machine is designed to separate seed from pods or flowers, dewing tree seed, remove appendages or hairs from seed, split twin seed, de-lint cotton seed, scarify hard coated...

Design of an ultraprecision computerized numerical control chemical mechanical polishing machine and its implementation

NASA Astrophysics Data System (ADS)

Zhang, Chupeng; Zhao, Huiying; Zhu, Xueliang; Zhao, Shijie; Jiang, Chunye

2018-01-01

The chemical mechanical polishing (CMP) is a key process during the machining route of plane optics. To improve the polishing efficiency and accuracy, a CMP model and machine tool were developed. Based on the Preston equation and the axial run-out error measurement results of the m circles on the tin plate, a CMP model that could simulate the material removal at any point on the workpiece was presented. An analysis of the model indicated that lower axial run-out error led to lower material removal but better polishing efficiency and accuracy. Based on this conclusion, the CMP machine was designed, and the ultraprecision gas hydrostatic guideway and rotary table as well as the Siemens 840Dsl numerical control system were incorporated in the CMP machine. To verify the design principles of machine, a series of detection and machining experiments were conducted. The LK-G5000 laser sensor was employed for detecting the straightness error of the gas hydrostatic guideway and the axial run-out error of the gas hydrostatic rotary table. A 300-mm-diameter optic was chosen for the surface profile machining experiments performed to determine the CMP efficiency and accuracy.

Valve assembly having remotely replaceable bearings

DOEpatents

Johnson, Evan R.; Tanner, David E.

1980-01-01

A valve assembly having remotely replaceable bearings is disclosed wherein a valve disc is supported within a flow duct for rotation about a pair of axially aligned bearings, one of which is carried by a spindle received within a diametral bore in the valve disc, and the other of which is carried by a bearing support block releasably mounted on the duct circumferentially of an annular collar on the valve disc coaxial with its diametrical bore. The spindle and bearing support block are adapted for remote removal to facilitate servicing or replacement of the valve disc support bearings.

Proximal femoral anatomy and collared stems in hip arthroplasty: is a single collar size sufficient?

PubMed

Bonin, Nicolas; Gedouin, Jean-Emmanuel; Pibarot, Vincent; Bejui-Hughues, Jacques; Bothorel, Hugo; Saffarini, Mo; Batailler, Cécile

2017-10-03

Even if the benefits of collars are unclear, they remain widely used, in several femoral stem designs. This study aimed to determine whether collar size should be proportional to hip dimensions and morphology. The hypothesis was that the collar should be larger for greater stem sizes and for varus femoral necks. Computed Tomography scans of 204 healthy hips were digitally analysed and manually templated to determine principle dimensions, appropriate stem size and model, as well as cortical distance at the femoral calcar (ideal collar size). Univariable analysis revealed that cortical distance was moderately correlated with mediolateral offset (r = 0.572; p < 0.0001) and stem model (r = 0.520; p < 0.0001). Cortical distance was weakly correlated with head diameter (r = 0.399; p < 0.0001), stem size (r = 0.200; p = 0.017), and patient gender (r = 0.361; p < 0.0001). Multivariable analysis confirmed that stem model (p < 0.0001) and head diameter (p = 0.0162) are directly correlated to cortical distance. We found that cortical distance along the femoral calcar is directly correlated with the model of the stem implanted ('standard' or 'varus') and with the head diameter. This cortical distance indicates optimal collar size, which would grant maximum calcar coverage without prosthetic overhang. Collar size should be proportional to the size of the operated hip, and should be larger for 'varus' stem models than for 'standard' stem models.

Inoculum reduction measures to manage Armillaria root disease in a severely infected stand of ponderosa pine in south-central Washington: 35-year results

Treesearch

Charles G. Shaw; D.W. Omdal; A. Ramsey-Kroll; L.F. Roth

2012-01-01

A stand of ponderosa pine (Pinus ponderosa) severely affected by Armillaria root disease was treated with five different levels of sanitation by root removal to reduce root disease losses in the regenerating stand. Treatments included the following: (1) all trees pushed over by machine, maximum removal of roots by machine ripping, and visible...

76 FR 11812 - Drill Pipe and Drill Collars From China

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-03

... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701-TA-474 and 731-TA-1176 (Final)] Drill Pipe and Drill Collars From China Determinations On the basis of the record \\1\\ developed in the subject... imports of drill pipe and drill collars from China, provided for in subheadings 7304.22, 7304.23, and 8431...

76 FR 11757 - Drill Pipe From the People's Republic of China: Antidumping Duty Order

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-03

... are finished drill pipe and drill collars without regard to the specific chemistry of the steel (i.e... included are unfinished drill collars (including all drill collar green tubes) and unfinished drill pipe (including drill pipe green tubes, which are tubes meeting the following description: seamless tubes with an...

75 FR 69657 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

... Applicators Using 1080 Collars for Livestock Protection; EPA ICR No. 1249.09, OMB Control No. 2070-0074 AGENCY... . Title: Requirements for Certified Applicators Using 1080 Collars for Livestock Protection. ICR Numbers.... Abstract: This ICR affects approximately 40 certified pesticide applicators who utilize 1080 toxic collars...

The electrical discharge machining of ceramics

NASA Astrophysics Data System (ADS)

Trueman, Christopher Stuart

This study introduces the concept of developing a novel and rapid rough-machining methodology for spark eroding suitable ceramic compositions based on material removal by thermal shock induced spalling, as opposed to conventional melting mechanisms. The principal materials studied were TiB2 dispersion toughened SiC, and Syalon501 - a commercially available TiN toughened sialon ceramic specifically designed for spark erosion. A preliminary study was also carried out on a range of SiC:B4C composites. Machinability and material performance were assessed where appropriate using machining parameters, material removal rate tests, surface analysis, four-point flexure testing, and tool wear. The machining technologies which supported the different mechanisms of material removal were identified, and each mechanism investigated by analysis of captured debris and sectioning of the workpiece. The SiC:B4C composites were found to be spark erodible only with B4C levels above 50% (by mass), and material removal was found to be solely by melting mechanisms. A SiC:TiB2 composition with the addition of 26.5% TiB2 (by mass) was found to be more machinable than a composition with 10% TiB2 (by mass), achieving greater material removal rates owing to its higher electrical conductivity. An in-depth study of the latter (10%TiB2) SiC composition and Syalon501 revealed surprisingly robust materials. Under conventional sparking (no arcing), material was removed by combined dissociation, melting and evaporation. Syalon501 in particular behaved with a high degree of predictability, and neither material could be made to spall under conventional sparking. However, by imposing conditions which deliberately induced arcing, both compositions spalled large flakes of material (up to several hundred microns across) in the localised region of the arc-strike. Examination of captured debris and fracture facets of the spall interface revealed the existence of small "penny cracks", each characterised by the presence of a dispersed particle (of greater thermal expansion) at its centre acting as a stress- raising nucleation point under the intense thermal loading of arcing. Sub-surface cracks in the near horizontal and near-vertical planes were discovered in line with published models based on the application of a hot-spot to brittle material, and evidence of discrete crack propagation under the thermally punctuated pulses of successive sparking was identified. Similar sub-surface cracking was also confirmed in Syalon501 which had been subjected to arcing. Sectioning of the workpiece revealed shallow sub-surface cracks which followed the profile of the machined surface in the near-horizontal plane, and which often limited the extent of near-vertical cracking to the layer of material above the crack, thereby offering the potential for a reliable and fast "planning" technique in which material would be removed in shallow layers. This research has shown that the possibility exists for increased material removal rates and improved process efficiency under a spalling-based machining regime, in which layers of material are released by thermal-shock induced fracture caused by arcing. The viability of developing a new rough-machining technology for ceramics, in which material is "planed" away prior to fine surface finishing by conventional spark erosion has, therefore, been successfully demonstrated.

40 CFR 63.471 - Facility-wide standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... machine in solid waste, obtained as described in paragraph (c)(3) of this section, during the most recent... section either in electronic or written form for a period of 5 years. For purposes of this paragraph... machine. (2) The solvent composition of wastes removed from each solvent cleaning machines as determined...

Neck Collar with Mild Jugular Vein Compression Ameliorates Brain Activation Changes during a Working Memory Task after a Season of High School Football.

PubMed

Yuan, Weihong; Leach, James; Maloney, Thomas; Altaye, Mekibib; Smith, David; Gubanich, Paul J; Barber Foss, Kim D; Thomas, Staci; DiCesare, Christopher A; Kiefer, Adam W; Myer, Gregory D

2017-08-15

Emerging evidence indicates that repetitive head impacts, even at a sub-concussive level, may result in exacerbated or prolonged neurological deficits in athletes. This study aimed to: 1) quantify the effect of repetitive head impacts on the alteration of neuronal activity based on functional magnetic resonance imaging (fMRI) of working memory after a high school football season; and 2) determine whether a neck collar that applies mild jugular vein compression designed to reduce brain energy absorption in head impact through "slosh" mitigation can ameliorate the altered fMRI activation during a working memory task. Participants were recruited from local high school football teams with 27 and 25 athletes assigned to the non-collar and collar group, respectively. A standard N-Back task was used to engage working memory in the fMRI at both pre- and post-season. The two study groups experienced similar head impact frequency and magnitude during the season (all p > 0.05). fMRI blood oxygen level dependent (BOLD) signal response (a reflection of the neuronal activity level) during the working memory task increased significantly from pre- to post-season in the non-collar group (corrected p < 0.05), but not in the collar group. Areas displaying less activation change in the collar group (corrected p < 0.05) included the precuneus, inferior parietal cortex, and dorsal lateral prefrontal cortex. Additionally, BOLD response in the non-collar group increased significantly in direct association with the total number of impacts and total g-force (p < 0.05). Our data provide initial neuroimaging evidence for the effect of repetitive head impacts on the working memory related brain activity, as well as a potential protective effect that resulted from the use of the purported brain slosh reducing neck collar in contact sports.

A Novel Approach for Apical Dissection During Robot-assisted Radical Prostatectomy: The "Collar" Technique.

PubMed

Bianchi, Lorenzo; Turri, Filippo Maria; Larcher, Alessandro; De Groote, Ruben; De Bruyne, Peter; De Coninck, Vincent; Goossens, Marijn; D'Hondt, Frederiek; De Naeyer, Geert; Schatteman, Peter; Mottrie, Alexandre

2018-02-02

Apical dissection in robot-assisted radical prostatectomy (RARP) affects not only cancer control, but also continence recovery. To describe a novel approach for apical dissection, the collar technique, to reduce apical positive surgical margins (PSMs). A total of 189 consecutive patients (81 in the control group, 108 in the collar technique group) underwent RARP at a single center. rates of apical PSMs; secondary outcome: urinary continence. The urethral sphincter complex is incised 2-3mm distally to the apex, to stay farther from it and reduce PSMs; the underlying smooth muscle is exposed and incised closer to the apex to preserve the maximal length of the lissosphincter. Mann-Whitney U and chi-square tests compared median and proportions between the two groups, respectively. Univariate logistic regression tested the association between technique employed and risk of apical PSMs. Fourteen patients (7.4%) revealed apical PSMs (9.9% in the control group, 5.6% in the collar group; p=0.7). When the collar technique was used, significantly lower rates of apical PSMs occurred in pT2 disease (0% vs 7.1%; p=0.03). In case of apical tumor at preoperative magnetic resonance imaging (MRI; n=43), the collar technique determined significantly lower overall (9.7% vs 42%) and apical (3.2% vs 42%) PSMs (all p≤0.02). Continence recovery in the collar and control groups was similar. When preoperative MRI showed an apical tumor, the collar technique had a significantly lower risk of apical PSMs (odds ratio: 0.05, p=0.009). The collar technique reduces the rates of apical PSMs in case of apical tumor, preserving the length of the lissosphincter. We describe a novel approach for apical dissection during robot-assisted radical prostatectomy. Our technique reduces the rates of apical surgical margins in case of apical tumor at preoperative magnetic resonance imaging and leads to optimal continence recovery. Copyright © 2018 European Association of Urology. Published by Elsevier B.V. All rights reserved.

Incidence of Peri-implant Diseases on Implants With and Without Laser-Microgrooved Collar: A 5-Year Retrospective Study Carried Out in Private Practice Patients.

PubMed

Guarnieri, Renzo; Grande, Maurizio; Zuffetti, Francesco; Testori, Tiziano

To retrospectively evaluate the incidence of peri-implant mucositis and peri-implantitis around dental implants with the same body design and surface but different collar surface (laser-microgrooved vs not laser-microgrooved) after 5 years of loading in private practice patients. The study was carried out on patients at a private dental clinic enrolled in a periodontal maintenance program, who received at least one implant with a laser-microgrooved collar surface and one implant without a laser-microgrooved collar surface. Clinical variables such as plaque, pocket depth, bleeding on probing, suppuration, and radiographic marginal bone loss at > 5 years around implants were investigated. The correlation between the prevalence of peri-implant mucositis/peri-implantitis and biotype, keratinized tissue width, prosthetic connection type, and prosthetic design type was also analyzed. A total of 166 implants in 74 patients were investigated. At the end of the 5-year follow-up period, 38 implants presented peri-implant mucositis, accounting for 22.8% of the total, affecting a total of 24 patients (32.4%), while 13 implants (7.8%) in 10 patients (13.5%) were diagnosed with peri-implantitis. Sixteen of 82 laser-microgrooved implants (19.5%) and 24 of 84 implants (28.5%) without a laser-microgrooved collar presented peri-implant mucositis, while 3 of 82 (3.6%) of laser-microgrooved implants and 10 of 84 (11.9%) implants without a laser-microgrooved collar demonstrated peri-implantitis. Differences in implant-based incidence of peri-implant diseases between implants with and without a laser-microgrooved collar were statistically significant (P < .05). In private practice patients enrolled in a professional, controlled oral hygiene regimen, implants with a laser-microgrooved collar, compared with implants without a laser-microgrooved collar, presented a statistically significantly lower incidence of peri-implant diseases.

Occupation and risk of sudden death in a United States community: a case-control analysis.

PubMed

Zhang, Lin; Narayanan, Kumar; Suryadevara, Vallabh; Teodorescu, Carmen; Reinier, Kyndaron; Uy-Evanado, Audrey; Chugh, Harpriya; Zheng, Zhi-Jie; Gunson, Karen; Jui, Jonathan; Chugh, Sumeet S

2015-12-18

Work environment is said to influence cardiovascular risk. We assessed whether nature of occupation affects risk of sudden cardiac death (SCD) in the general population. In the ongoing, prospective Oregon Sudden Unexpected Death Study (catchment population 1 million), working-age SCD cases (18-65 years) were compared with controls who died from any cause. Usual occupation obtained from death certificates was classified using the US Census Bureau standard occupational classification descriptions and categorised as white collar, blue collar or homemaker. Odds ratio (OR) for SCD by occupation category was obtained and clinical profile of SCD cases was compared by occupation type. Among SCD cases (n=646; 74% male) compared to controls (n=622; 73.6% male), the proportion of white collar workers was higher among male SCD cases (52.7% vs 43.7%; p=0.01); the difference in females was smaller (59.5% vs 55%; p=0.62). Adjusting for race and smoking status, male white collar workers had a higher risk of SCD compared to blue collar workers (OR=1.67, (1.26 to 2.23), p<0.001). A similar, non-significant trend was observed among females (OR 1.49 (0.81 to 2.75); p=0.20). White collar SCD cases were less likely to be current smokers (34.7% vs 45.3%, p=0.008), drug misusers (13.1% vs 18.5%) or have diabetes (21.4% vs 28.2%, both p=0.07) compared to blue collar workers. Other cardiac risk factors were similar. A white collar occupation was associated with increased risk of SCD, when compared to blue collar occupations. Since differences in conventional risk factors did not explain this elevated risk, work-related behavioural and psychosocial stressors warrant a closer evaluation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Occupation and risk of sudden death in a United States community: a case–control analysis

PubMed Central

Zhang, Lin; Narayanan, Kumar; Suryadevara, Vallabh; Teodorescu, Carmen; Reinier, Kyndaron; Uy-Evanado, Audrey; Chugh, Harpriya; Zheng, Zhi-Jie; Gunson, Karen; Jui, Jonathan; Chugh, Sumeet S

2015-01-01

Objective Work environment is said to influence cardiovascular risk. We assessed whether nature of occupation affects risk of sudden cardiac death (SCD) in the general population. Methods In the ongoing, prospective Oregon Sudden Unexpected Death Study (catchment population 1 million), working-age SCD cases (18–65 years) were compared with controls who died from any cause. Usual occupation obtained from death certificates was classified using the US Census Bureau standard occupational classification descriptions and categorised as white collar, blue collar or homemaker. Odds ratio (OR) for SCD by occupation category was obtained and clinical profile of SCD cases was compared by occupation type. Results Among SCD cases (n=646; 74% male) compared to controls (n=622; 73.6% male), the proportion of white collar workers was higher among male SCD cases (52.7% vs 43.7%; p=0.01); the difference in females was smaller (59.5% vs 55%; p=0.62). Adjusting for race and smoking status, male white collar workers had a higher risk of SCD compared to blue collar workers (OR=1.67, (1.26 to 2.23), p<0.001). A similar, non-significant trend was observed among females (OR 1.49 (0.81 to 2.75); p=0.20). White collar SCD cases were less likely to be current smokers (34.7% vs 45.3%, p=0.008), drug misusers (13.1% vs 18.5%) or have diabetes (21.4% vs 28.2%, both p=0.07) compared to blue collar workers. Other cardiac risk factors were similar. Conclusions A white collar occupation was associated with increased risk of SCD, when compared to blue collar occupations. Since differences in conventional risk factors did not explain this elevated risk, work-related behavioural and psychosocial stressors warrant a closer evaluation. PMID:26685031

High voltage bushing having weathershed and surrounding stress relief collar

DOEpatents

Cookson, Alan H.

1981-01-01

A high voltage electric bushing comprises a hollow elongated dielectric weathershed which encloses a high voltage conductor. A collar formed of high voltage dielectric material is positioned over the weathershed and is bonded thereto by an interface material which precludes moisture-like contaminants from entering between the bonded portions. The collar is substantially thicker than the adjacent weathershed which it surrounds, providing relief of the electric stresses which would otherwise appear on the outer surface of the weathershed. The collar may include a conductive ring or capacitive foil to further relieve electric stresses experienced by the bushing.

Article of Clothing for Storing and Deploying a Scarf

NASA Technical Reports Server (NTRS)

Romero, Robert (Inventor)

2015-01-01

A clothing article surrounds a wearer's upper torso. The article includes connected front portion, a collar. A sleeve is formed in the front portion. A jacket, and coat with an attachable/detachable scarf will be folded and stored in the inter portion of the front side of the collar area with elastic at each end and Velcro onto the inner portion of your collar, therefore eliminating the lost of them by any consumers, and especially children. A sleeve like collar attached to the coat and jacket for storing a scarf and making it easily deployable while in use.

Anomaly detection for machine learning redshifts applied to SDSS galaxies

NASA Astrophysics Data System (ADS)

Hoyle, Ben; Rau, Markus Michael; Paech, Kerstin; Bonnett, Christopher; Seitz, Stella; Weller, Jochen

2015-10-01

We present an analysis of anomaly detection for machine learning redshift estimation. Anomaly detection allows the removal of poor training examples, which can adversely influence redshift estimates. Anomalous training examples may be photometric galaxies with incorrect spectroscopic redshifts, or galaxies with one or more poorly measured photometric quantity. We select 2.5 million `clean' SDSS DR12 galaxies with reliable spectroscopic redshifts, and 6730 `anomalous' galaxies with spectroscopic redshift measurements which are flagged as unreliable. We contaminate the clean base galaxy sample with galaxies with unreliable redshifts and attempt to recover the contaminating galaxies using the Elliptical Envelope technique. We then train four machine learning architectures for redshift analysis on both the contaminated sample and on the preprocessed `anomaly-removed' sample and measure redshift statistics on a clean validation sample generated without any preprocessing. We find an improvement on all measured statistics of up to 80 per cent when training on the anomaly removed sample as compared with training on the contaminated sample for each of the machine learning routines explored. We further describe a method to estimate the contamination fraction of a base data sample.

Etching process for improving the strength of a laser-machined silicon-based ceramic article

DOEpatents

Copley, Stephen M.; Tao, Hongyi; Todd-Copley, Judith A.

1991-01-01

A process for improving the strength of laser-machined articles formed of a silicon-based ceramic material such as silicon nitride, in which the laser-machined surface is immersed in an etching solution of hydrofluoric acid and nitric acid for a duration sufficient to remove substantially all of a silicon film residue on the surface but insufficient to allow the solution to unduly attack the grain boundaries of the underlying silicon nitride substrate. This effectively removes the silicon film as a source of cracks that otherwise could propagate downwardly into the silicon nitride substrate and significantly reduce its strength.

Etching process for improving the strength of a laser-machined silicon-based ceramic article

DOEpatents

Copley, S.M.; Tao, H.; Todd-Copley, J.A.

1991-06-11

A process is disclosed for improving the strength of laser-machined articles formed of a silicon-based ceramic material such as silicon nitride, in which the laser-machined surface is immersed in an etching solution of hydrofluoric acid and nitric acid for a duration sufficient to remove substantially all of a silicon film residue on the surface but insufficient to allow the solution to unduly attack the grain boundaries of the underlying silicon nitride substrate. This effectively removes the silicon film as a source of cracks that otherwise could propagate downwardly into the silicon nitride substrate and significantly reduce its strength. 1 figure.

Metabolic outcomes of workers according to the International Standard Classification of Occupations in Korea.

PubMed

Lee, Wanhyung; Yeom, Hyungseon; Yoon, Jin-Ha; Won, Jong-Uk; Jung, Pil Kyun; Lee, June-Hee; Seok, Hongdeok; Roh, Jaehoon

2016-08-01

Occupation influences the risk for developing chronic metabolic diseases. We compared the prevalence of MetS by International Standard Classification of Occupations using the nationally representative data in Korea (KNHANES). We enrolled 16,763 workers (9,175 males; 7,588 females) who had measurements for the National Cholesterol Education Program criteria III and other variables. OR and 95%CIs for MetS and its components were estimated according to occupation using the multiple logistic regression models. The occupational groups with the highest age-standardized prevalence of MetS were lower skilled white-collar men (31.1 ± 2.4%) and green-collar women (24.2 ± 2.9%). Compared with the unskilled male blue-collar group, which had the lowest prevalence of MetS, the OR (95%CIs) of MetS in men were 1.77 (1.45-2.15) in higher skilled white-collar, 1.82 (1.47-2.26) in lower-skilled white-collar, 1.63 (1.32-2.01) in pink-collar and 1.37 (1.13-1.66) in skilled blue-collar workers in final logistic regression model. MetS and its components vary by occupational category and gender in ways that may guide health interventions. Am. J. Ind. Med. 59:685-694, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Investigation of roughing machining simulation by using visual basic programming in NX CAM system

NASA Astrophysics Data System (ADS)

Hafiz Mohamad, Mohamad; Nafis Osman Zahid, Muhammed

2018-03-01

This paper outlines a simulation study to investigate the characteristic of roughing machining simulation in 4th axis milling processes by utilizing visual basic programming in NX CAM systems. The selection and optimization of cutting orientation in rough milling operation is critical in 4th axis machining. The main purpose of roughing operation is to approximately shape the machined parts into finished form by removing the bulk of material from workpieces. In this paper, the simulations are executed by manipulating a set of different cutting orientation to generate estimated volume removed from the machine parts. The cutting orientation with high volume removal is denoted as an optimum value and chosen to execute a roughing operation. In order to run the simulation, customized software is developed to assist the routines. Operations build-up instructions in NX CAM interface are translated into programming codes via advanced tool available in the Visual Basic Studio. The codes is customized and equipped with decision making tools to run and control the simulations. It permits the integration with any independent program files to execute specific operations. This paper aims to discuss about the simulation program and identifies optimum cutting orientations for roughing processes. The output of this study will broaden up the simulation routines performed in NX CAM systems.

A Collar for Marking Big Game Animals

Treesearch

Robert L. Phillips

1970-01-01

A Simple, inexpensive collar made of Armor-tite (a vinyl-coated nylon fabric) was designed for marking white-tailed deer (Odocoileus virginianus) and moose (Alces alces). Field tests showed that the material is easily seen and extrememly durable. It may be suitable for use on other large mammals. The collar can be quickly fitted to individual animals under field...

GPS radio collar 3D performance as influenced by forest structure and topography

Treesearch

R. Scott Gamo; Mark A. Rumble; Fred Lindzey; Matt Stefanich

2000-01-01

Global Positioning System (GPS) telemetry enables biologists to obtain accurate and systematic locations of animals. Vegetation can block signals from satellites to GPS radio collars. Therefore, a vegetation dependent bias to telemetry data may occur which if quantified, could be accounted for. We evaluated the performance of GPS collars in 6 structural stage...

Research Note: Assessing the Perceived Seriousness of White-Collar and Street Crimes

ERIC Educational Resources Information Center

Piquero, Nicole Leeper; Carmichael, Stephanie; Piquero, Alex R.

2008-01-01

Controversy surrounds the ranking of crime seriousness of white-collar crimes relative to street crimes, with early research suggesting the general public is indifferent to crimes of the elite, whereas more recent research indicates that the public thinks certain types of white-collar crime are serious. Building on prior research limitations and…

75 FR 10501 - Drill Pipe and Drill Collars from China

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

... Pipe and Drill Collars from China Determinations On the basis of the record \\1\\ developed in the... injury by reason of imports from China of drill pipe and drill collars, provided for in subheadings 7304... Government of China.\\2\\ \\1\\ The record is defined in sec. 207.2(f) of the Commission's Rules of Practice and...

A self-adjusting expandable GPS collar for male elk

Treesearch

Brian L. Dick; Scott L. Findholt; Bruce K. Johnson

2013-01-01

It is a challenge to use collars on male cervids because their neck size can increase substantially during the rut and also because of growth as the animal matures. We describe how to build a self-adjusting expandable collar for yearling or adult male Rocky Mountain elk (Cervus elaphus) to which very high frequency transmitters and global...

Neck collar used in treatment of victims of urban motorcycle accidents: over- or underprotection?

PubMed

Lin, Hsing-Lin; Lee, Wei-Che; Chen, Chao-Wen; Lin, Tsung-Ying; Cheng, Yuan-Chia; Yeh, Yung-Sung; Lin, Yen-Ko; Kuo, Liang-Chi

2011-11-01

Cervical collar brace protection of the cervical spine at the scene of the incident is the first priority for emergency medical technicians treating patients who have sustained trauma. However, there is still controversy between over- or underprotection. The objective of this study was to survey the cervical spine injury of lightweight motorcycle accident victims and further evaluate the neck collar protection policy. We retrospectively reviewed patients who sustained lightweight motorcycle injuries, assumed to have been at a low velocity, with incidence of cervical spine damage, from a single medical center's trauma registration from 2008 to 2009. Patients were divided into 2 groups: those who were immobilized by cervical collar brace and those who were not. Of the 8633 motorcycle crash victims, 63 patients had cervical spine injury. The average of the injury severity score in these patients was 14.31 ± 8.25. There was no significant correlation of cervical spine injury between the patients who had had the neck collar applied and those who had not (χ(2), P = .896). The length of stay in intensive care unit was longer in the patients who had the neck collar applied, but the total hospital length of stay was not statistically different to the patients who did not have the neck collar applied. The incidence of cervical spinal injuries in the urban area lightweight motorcyclists is very low. Prehospital protocol for application of a cervical collar brace to people who have sustained a lightweight motorcycle accident in the urban area should be revised to avoid unnecessary restraint and possible complications. Copyright © 2011 Elsevier Inc. All rights reserved.

Analysis of head impact exposure and brain microstructure response in a season-long application of a jugular vein compression collar: a prospective, neuroimaging investigation in American football

PubMed Central

Myer, Gregory D; Yuan, Weihong; Barber Foss, Kim D; Thomas, Staci; Smith, David; Leach, James; Kiefer, Adam W; Dicesare, Chris; Adams, Janet; Gubanich, Paul J; Kitchen, Katie; Schneider, Daniel K; Braswell, Daniel; Krueger, Darcy; Altaye, Mekibib

2016-01-01

Background Historical approaches to protect the brain from outside the skull (eg, helmets and mouthpieces) have been ineffective in reducing internal injury to the brain that arises from energy absorption during sports-related collisions. We aimed to evaluate the effects of a neck collar, which applies gentle bilateral jugular vein compression, resulting in cerebral venous engorgement to reduce head impact energy absorption during collision. Specifically, we investigated the effect of collar wearing during head impact exposure on brain microstructure integrity following a competitive high school American football season. Methods A prospective longitudinal controlled trial was employed to evaluate the effects of collar wearing (n=32) relative to controls (CTRL; n=30) during one competitive football season (age: 17.04±0.67 years). Impact exposure was collected using helmet sensors and white matter (WM) integrity was quantified based on diffusion tensor imaging (DTI) serving as the primary outcome. Results With similar overall g-forces and total head impact exposure experienced in the two study groups during the season (p>0.05), significant preseason to postseason changes in mean diffusivity, axial diffusivity and radial diffusivity in the WM integrity were noted in the CTRL group (corrected p<0.05) but not in the collar group (p>0.05). The CTRL group demonstrated significantly larger preseason to postseason DTI change in multiple WM regions compared with the collar group (corrected p<0.05). Discussion Reduced WM diffusivity alteration was noted in participants wearing a neck collar after a season of competitive football. Collar wearing may have provided a protective effect against brain microstructural changes after repetitive head impacts. Trial registration number NCT02696200. PMID:27307271

Thermal-mechanical modeling of laser ablation hybrid machining

NASA Astrophysics Data System (ADS)

Matin, Mohammad Kaiser

2001-08-01

Hard, brittle and wear-resistant materials like ceramics pose a problem when being machined using conventional machining processes. Machining ceramics even with a diamond cutting tool is very difficult and costly. Near net-shape processes, like laser evaporation, produce micro-cracks that require extra finishing. Thus it is anticipated that ceramic machining will have to continue to be explored with new-sprung techniques before ceramic materials become commonplace. This numerical investigation results from the numerical simulations of the thermal and mechanical modeling of simultaneous material removal from hard-to-machine materials using both laser ablation and conventional tool cutting utilizing the finite element method. The model is formulated using a two dimensional, planar, computational domain. The process simulation acronymed, LAHM (Laser Ablation Hybrid Machining), uses laser energy for two purposes. The first purpose is to remove the material by ablation. The second purpose is to heat the unremoved material that lies below the ablated material in order to ``soften'' it. The softened material is then simultaneously removed by conventional machining processes. The complete solution determines the temperature distribution and stress contours within the material and tracks the moving boundary that occurs due to material ablation. The temperature distribution is used to determine the distance below the phase change surface where sufficient ``softening'' has occurred, so that a cutting tool may be used to remove additional material. The model incorporated for tracking the ablative surface does not assume an isothermal melt phase (e.g. Stefan problem) for laser ablation. Both surface absorption and volume absorption of laser energy as function of depth have been considered in the models. LAHM, from the thermal and mechanical point of view is a complex machining process involving large deformations at high strain rates, thermal effects of the laser, removal of materials and contact between workpiece and tool. The theoretical formulation associated with LAHM for solving the thermal-mechanical problem using the finite element method is presented. The thermal formulation is incorporated in the user defined subroutines called by ABAQUS/Standard. The mechanical portion is modeled using ABAQUS/Explicit's general capabilities of modeling interactions involving contact and separation. The results obtained from the FEA simulations showed that the cutting force decrease considerably in both LAEM Surface Absorption (LARM-SA) and LAHM volume absorption (LAHM-VA) models relative to LAM model. It was observed that the HAZ can be expanded or narrowed depending on the laser speed and power. The cutting force is minimal at the last extent of the HAZ. In both the models the laser ablates material thus reducing material stiffness as well as relaxing the thermal stress. The stress values obtained showed compressive yield stress just below the ablated surface and chip. The failure occurs by conventional cutting where tensile stress exceeds the tensile strength of the material at that temperature. In this hybrid machining process the advantages of both the individual machining processes were realized.

Mental ill-health and the differential effect of employee type on absenteeism and presenteeism.

PubMed

Hilton, Michael F; Scuffham, Paul A; Sheridan, Judith; Cleary, Catherine M; Whiteford, Harvey A

2008-11-01

Mental ill-health results in substantial reductions in employee productivity (absenteeism and presenteeism). This paper examines the relationship between employee psychological distress, employee type and productivity. Utilizing the Health and Performance at Work Questionnaire, in a sample of 60,556 full-time employees, the impact that psychological distress (Kessler 6) imposes on employee productivity by occupation type is examined. Comparison of white-collar workers absenteeism rates by low and high psychological distress reveals no statistically significant difference. Nevertheless, the same comparison for blue-collar workers reveals that high psychological distress results in an 18% increase in absenteeism rates. High K6 score resulted in a presenteeism increase of 6% in both blue and white-collar employees. The novel finding is that mental ill-health produces little to no absenteeism in white-collar workers yet a profound absenteeism increase in the blue-collar sector.

Green Collar Workers: An Emerging Workforce in the Environmental Sector.

PubMed

McClure, Laura A; LeBlanc, William G; Fernandez, Cristina A; Fleming, Lora E; Lee, David J; Moore, Kevin J; Caban-Martinez, Alberto J

2017-05-01

We describe the socio-demographic, occupational, and health characteristics of "green collar" workers, a vital and emerging workforce in energy-efficiency and sustainability. We linked data from the 2004 to 2012 National Health Interview Surveys (NHIS) and US Occupational Information Network (O*NET). Descriptive and logistic regression analyses were conducted using green collar worker status as the outcome (n = 143,346). Green collar workers are more likely than non-green workers to be men, age 25 to 64 years, obese, and with less than or equal to high school (HS) education. They are less likely to be racial/ethnic minorities and employed in small companies or government jobs. Green collar workers have a distinct socio-demographic and occupational profile, and this workforce deserves active surveillance to protect its workers' safety. The NHIS-O*NET linkage represents a valuable resource to further identify the unique exposures and characteristics of this occupational sector.

Gray Wolf (Canis lupus) movements and behavior around a kill site and implications for GPS collar studies

USGS Publications Warehouse

Mech, L. David

2011-01-01

Global Positioning System (GPS) radio-collars are increasingly used to estimate Gray Wolf (Canis lupus) kill rates. In interpreting results from this technology, researchers make various assumptions about wolf behavior around kills, yet no detailed description of this behavior has been published. This article describes the behavior of six wolves in an area of constant daylight during 30 hours, from when the pack killed a Muskox (Ovibos moschatus) calf and yearling on Ellesmere Island, Nunavut, Canada, to when they abandoned the kill remains. Although this is only a single incident, it demonstrates one possible scenario of pack behavior around a kill. Combined with the literature, this observation supports placing a radio-collar on the breeding male to maximize finding kills via GPS collars and qualifying results depending on whatever other information is available about the collared wolf's pack.

27 CFR 25.192 - Removal of sour or damaged beer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Beverage Use § 25.192 Removal of sour or damaged beer. (a) Containers. The brewer shall remove sour or.... The brewer shall remove sour or damaged beer without passing it through the meter (if any) or racking machine. (c) Records and reports. The brewer shall record the removal of sour or damaged beer in daily...

Development of plasma chemical vaporization machining

NASA Astrophysics Data System (ADS)

Mori, Yuzo; Yamauchi, Kazuto; Yamamura, Kazuya; Sano, Yasuhisa

2000-12-01

Conventional machining processes, such as turning, grinding, or lapping are still applied for many materials including functional ones. But those processes are accompanied with the formation of a deformed layer, so that machined surfaces cannot perform their original functions. In order to avoid such points, plasma chemical vaporization machining (CVM) has been developed. Plasma CVM is a chemical machining method using neutral radicals, which are generated by the atmospheric pressure plasma. By using a rotary electrode for generation of plasma, a high density of neutral radicals was formed, and we succeeded in obtaining high removal rate of several microns to several hundred microns per minute for various functional materials such as fused silica, single crystal silicon, molybdenum, tungsten, silicon carbide, and diamond. Especially, a high removal rate equal to lapping in the mechanical machining of fused silica and silicon was realized. 1.4 nm (p-v) was obtained as a surface roughness in the case of machining a silicon wafer. The defect density of a silicon wafer surface polished by various machining method was evaluated by the surface photo voltage spectroscopy. As a result, the defect density of the surface machined by plasma CVM was under 1/100 in comparison with the surface machined by mechanical polishing and argon ion sputtering, and very low defect density which was equivalent to the chemical etched surface was realized. A numerically controlled CVM machine for x-ray mirror fabrication is detailed in the accompanying article in this issue.

The machinability of cast titanium and Ti-6Al-4V.

PubMed

Ohkubo, C; Watanabe, I; Ford, J P; Nakajima, H; Hosoi, T; Okabe, T

2000-02-01

This study investigated the machinability (ease of metal removal) of commercially pure (CP) titanium and Ti-6Al-4V alloy. Both CP Ti and Ti-6Al-4V were cast into magnesia molds. Two types of specimens (with alpha-case and without alpha-case) were made for CP Ti and Ti-6Al-4V. Machinability (n = 5) was evaluated as volume loss (mm3) by cutting/grinding the 3.0 mm surface using fissure burs and silicon carbide (SiC) under two machining conditions: (1) two machining forces (100 or 300 gf) at two rotational speeds (15000 or 30000 rpm) for 1 min, and (2) constant machining force of 100 gf and rotational speed of 15000 rpm for 1, 2, 5, 10, and 30 min. As controls, conventionally cast Co-Cr and Type IV gold alloys were evaluated in the same manner as the titanium. When fissure burs were used, there was a significant difference in the machinability between CP titanium with alpha-case and without alpha-case. On the other hand, there was no appreciable difference in the amount of metal removed for each tested metal when using the SiC points.

The Accumulation of Educational Capital among Young Blue-Collar Workers in Russia

ERIC Educational Resources Information Center

Cherednichenko, G. A.

2014-01-01

Research on young blue-collar workers in Russia indicates that a large percentage of them continue to improve their educational qualifications during the first five years of employment, but that it declines after that time. The two most frequent reasons for upgrading their skills are a desire to leave blue-collar employment, and to increase the…

Career and Technical Education: Pursuing a Pipeline for the New Green-Collar Workforce

ERIC Educational Resources Information Center

Arnett, Sally E.; Kozlowski, Patti; Peach, Peggy; Varela, Erika

2009-01-01

As the white- and blue-collar jobs are thinning because of the economic downturn, the economy is being rejuvenated by a new color of collar jobs--green. Green jobs encompass a range of skills, educational backgrounds and occupational profiles. The green industry has been recognized as a high-growth workforce sector because of the demand for…

Overview of the Machine-Tool Task Force

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, G.P.

1981-06-08

The Machine Tool Task Force, (MTTF) surveyed the state of the art of machine tool technology for material removal for two and one-half years. This overview gives a brief summary of the approach, specific subjects covered, principal conclusions and some of the key recommendations aimed at improving the technology and advancing the productivity of machine tools. The Task Force consisted of 123 experts from the US and other countries. Their findings are documented in a five-volume report, Technology of Machine Tools.

Critical Care Dialysis System

NASA Technical Reports Server (NTRS)

1992-01-01

Organon Teknika Corporation's REDY 2000 dialysis machine employs technology originally developed under NASA contract by Marquardt Corporation. The chemical process developed during the project could be applied to removing toxic waste from used dialysis fluid. This discovery led to the development of a kidney dialysis machine using "sorbent" dialysis, a method of removing urea from human blood by treating a dialysate solution. The process saves electricity and, because the need for a continuous water supply is eliminated, the patient has greater freedom.

Washing machine usage in remote aboriginal communities.

PubMed

Lloyd, C R

1998-10-01

The use of washing machines was investigated in two remote Aboriginal communities in the Anangu Pitjantjatjara homelands. The aim was to look both at machine reliability and to investigate the health aspect of washing clothes. A total of 39 machines were inspected for wear and component reliability every three months over a one-year period. Of these, 10 machines were monitored in detail for water consumption, hours of use and cycles of operation. The machines monitored were Speed Queen model EA2011 (7 kg washing load) commercial units. The field survey results suggested a high rate of operation of the machines with an average of around 1,100 washing cycles per year (range 150 and 2,300 cycles per year). The results were compared with available figures for the average Australian household. A literature survey, to ascertain the health outcomes relating to washing clothes and bedding, confirmed that washing machines are efficient at removal of bacteria from clothes and bedding but suggested that recontamination of clothing after washing often negated the prior removal. High temperature washing (> 60 degrees C) appeared to be advantageous from a health perspective. With regards to larger organisms, while dust mites and body lice transmission between people would probably be decreased by washing clothes, scabies appeared to be mainly transmitted by body contact and thus transmission would be only marginally decreased by the use of washing machines.

Marginal bone levels at single tooth implants with a conical fixture design. The influence of surface macro- and microstructure.

PubMed

Norton, M R

1998-04-01

The concept of a conical implant design to accommodate single tooth replacement, has previously been shown to result in excessive bone loss, around the machined titanium conical collar, usually down to the 1st thread. This unusually aggressive loss of bone was shown to occur within a short period of time, post loading, with greater than 3 mm of bone loss occurring within the 1st 6 months to 1 year. The influence of implant design, surface texture and microleakage have all been highlighted as a potential cause. A modification of the surface structure, both at the macroscopic and microscopic level, as well as an altered fixture-abutment interface design has resulted in the maintenance of marginal bone around a single tooth titanium implant with a similar conical design. The radiographic follow-up of 33 implants loaded for up to 4 years, has revealed, by comparison, a most favourable maintenance of marginal bone around the conical collar, with a mean marginal bone loss of 0.32 mm mesially and 0.34 mm distally for the whole group. The cumulative mean marginal bone loss mesially and distally is 0.42 mm and 0.40 mm from 1 to 2 years, 0.54 mm and 0.43 mm from 2 to 3 years, 0.51 mm and 0.24 mm from 3 to 4 years, and 0.62 mm and 0.60 mm for implants past their 4 year recall.

Standard guidelines of care: laser and IPL hair reduction.

PubMed

Buddhadev, Rajesh M

2008-01-01

Laser-assisted hair removal, Laser hair removal, Laser and light-assisted hair removal, Laser and light-assisted, long-term hair reduction, IPL photodepilation, LHE photodepilation; all these are acceptable synonyms. Laser (Ruby, Nd Yag, Alexandrite, Diode), intense pulse light, light and heat energy system are the different light-/Laser-based systems used for hair removal; each have its advantages and disadvantages. The word "LONG-TERM HAIR REDUCTION" should be used rather than permanent hair removal. Patient counseling is essential about the need for multiple sessions. PHYSICIANS' QUALIFICATIONS: Laser hair removal may be practiced by any dermatologist, who has received adequate background training during postgraduation or later at a centre that provides education and training in Lasers or in focused workshops providing such training. The dermatologist should have adequate knowledge of the machines, the parameters and aftercare. The physician may allow the actual procedure to be performed under his/her direct supervision by a trained nurse assistant/junior doctor. However, the final responsibility for the procedure would lie with the physician. The procedure may be performed in the physician's minor procedure room. Investigations to rule out any underlying cause for hair growth are important; concurrent drug therapy may be needed. Laser parameters vary with area, type of hair, and the machine used. Full knowledge about the machine and cooling system is important. Future maintenance treatments may be needed.

Do cervical collars and cervicothoracic orthoses effectively stabilize the injured cervical spine? A biomechanical investigation.

PubMed

Ivancic, Paul C

2013-06-01

In vitro biomechanical study. Our objective was to determine the effectiveness of cervical collars and cervicothoracic orthoses for stabilizing clinically relevant, experimentally produced cervical spine injuries. Most previous in vitro studies of cervical orthoses used a simplified injury model with all ligaments transected at a single spinal level, which differs from real-life neck injuries. Human volunteer studies are limited to measuring only sagittal motions or 3-dimensional motions only of the head or 1 or 2 spinal levels. Three-plane flexibility tests were performed to evaluate 2 cervical collars (Vista Collar and Vista Multipost Collar) and 2 cervicothoracic orthoses (Vista TS and Vista TS4) using a skull-neck-thorax model with 8 injured cervical spine specimens (manufacturer of orthoses: Aspen Medical Products Inc, Irvine, CA). The injuries consisted of flexion-compression at the lower cervical spine and extension-compression at superior spinal levels. Pair-wise repeated measures analysis of variance (P < 0.05) and Bonferroni post hoc tests determined significant differences in average range of motions of the head relative to the base, C7 or T1, among experimental conditions. RESULTS.: All orthoses significantly reduced unrestricted head/base flexion and extension. The orthoses allowed between 8.4% and 25.8% of unrestricted head/base motion in flexion/extension, 57.8% to 75.5% in axial rotation, and 53.8% to 73.7% in lateral bending. The average percentages of unrestricted motion allowed by the Vista Collar, Vista Multipost Collar, Vista TS, and Vista TS4 were: 14.0, 9.7, 6.1, and 4.7, respectively, for middle cervical spine extension and 13.2, 11.8, 3.3, and 0.4, respectively, for lower cervical spine flexion. Successive increases in immobilization were observed from Vista Collar to Vista Multipost Collar, Vista TS, and Vista TS4 in extension at the injured middle cervical spine and in flexion at the injured lower cervical spine. Our results may assist clinicians in selecting the most appropriate orthosis based upon patient-specific cervical spine injuries.

Effects of plant phenology and vertical height on accuracy of radio-telemetry locations

USGS Publications Warehouse

Grovenburg, Troy W.; Jacques, Christopher N.; Klaver, Robert W.; DePerno, Christopher S.; Lehman, Chad P.; Brinkman, Todd J.; Robling, Kevin A.; Rupp, Susan P.; Jenks, Jonathan A.

2013-01-01

The use of very high frequency (VHF) radio-telemetry remains wide-spread in studies of wildlife ecology and management. However, few studies have evaluated the influence of vegetative obstruction on accuracy in differing habitats with varying transmitter types and heights. Using adult and fawn collars at varying heights above the ground (0, 33, 66 and 100 cm) to simulate activities (bedded, feeding and standing) and ages (neonate, juvenile and adult) of deer Odocoileus spp., we collected 5,767 bearings and estimated 1,424 locations (28-30 for each of 48 subsamples) in three habitat types (pasture, grassland and forest), during two stages of vegetative growth (spring and late summer). Bearing error was approximately twice as large at a distance of 900 m for fawn (9.9°) than for adult deer collars (4.9°). Of 12 models developed to explain the variation in location error, the analysis of covariance model (HT*D + C*D + HT*TBA + C*TBA) containing interactions of height of collar above ground (HT), collar type (C), vertical height of understory vegetation (D) and tree basal area (TBA) was the best model (wi = 0.92) and explained ∼ 71% of the variation in location error. Location error was greater for both collar types at 0 and 33 cm above the ground compared to 66 and 100 cm above the ground; however, location error was less for adult than fawn collars. Vegetation metrics influenced location error, which increased with greater vertical height of understory vegetation and tree basal area. Further, interaction of vegetation metrics and categorical variables indicated significant effects on location error. Our results indicate that researchers need to consider study objectives, life history of the study animal, signal strength of collar (collar type), distance from transmitter to receiver, topographical changes in elevation, habitat composition and season when designing telemetry protocols. Bearing distances in forested habitat should be decreased (approximately 23% in our study) compared to bearing distances in open habitat to maintain a consistent bearing error across habitats. Additionally, we believe that field biologists monitoring neonate ungulates for habitat selection should rely on visual locations rather than using VHF-collars and triangulation.

33 CFR 157.170 - COW equipment: Removal.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false COW equipment: Removal. 157.170... Crude Oil Washing (COW) System on Tank Vessels Cow Operations § 157.170 COW equipment: Removal. (a) Whenever a deck mounted COW machine is removed from the tank, the master shall ensure that: (1) The supply...

Investigation of laser ablation of CVD diamond film

NASA Astrophysics Data System (ADS)

Chao, Choung-Lii; Chou, W. C.; Ma, Kung-Jen; Chen, Ta-Tung; Liu, Y. M.; Kuo, Y. S.; Chen, Ying-Tung

2005-04-01

Diamond, having many advanced physical and mechanical properties, is one of the most important materials used in the mechanical, telecommunication and optoelectronic industry. However, high hardness value and extreme brittleness have made diamond extremely difficult to be machined by conventional mechanical grinding and polishing. In the present study, the microwave CVD method was employed to produce epitaxial diamond films on silicon single crystal. Laser ablation experiments were then conducted on the obtained diamond films. The underlying material removal mechanisms, microstructure of the machined surface and related machining conditions were also investigated. It was found that during the laser ablation, peaks of the diamond grains were removed mainly by the photo-thermal effects introduced by excimer laser. The diamond structures of the protruded diamond grains were transformed by the laser photonic energy into graphite, amorphous diamond and amorphous carbon which were removed by the subsequent laser shots. As the protruding peaks gradually removed from the surface the removal rate decreased. Surface roughness (Ra) was improved from above 1μm to around 0.1μm in few minutes time in this study. However, a scanning technique would be required if a large area was to be polished by laser and, as a consequence, it could be very time consuming.

Collared peccary range expansion in northwestern New Mexico

USGS Publications Warehouse

Albert, S.; Ramotnik, C.A.; Schmitt, C.G.

2004-01-01

We report new records of collared peccary (Pecari tajacu) in New Mexico that document its continued northward expansion in the United States, in general, and in northwestern New Mexico, in particular. These records might represent the northernmost extent of its range in the Southwest. Collared peccaries in New Mexico typically occur in desert, rocky, and brushy foothill regions and riparian communities. On the Zuni Indian Reservation, animals were observed at elevations up to 2,335 m in piñon-juniper and ponderosa pine habitats. Climate might play an important role in range expansion and contraction as collared peccaries might migrate north during years of drought or mild winters in search of food or new habitat.

Characterization of irradiated AISI 316L stainless steel disks removed from the Spallation Neutron Source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vevera, Bradley J; Hyres, James W; McClintock, David A

2014-01-01

Irradiated AISI 316L stainless steel disks were removed from the Spallation Neutron Source (SNS) for post-irradiation examination (PIE) to assess mechanical property changes due to radiation damage and erosion of the target vessel. Topics reviewed include high-resolution photography of the disk specimens, cleaning to remove mercury (Hg) residue and surface oxides, profile mapping of cavitation pits using high frequency ultrasonic testing (UT), high-resolution surface replication, and machining of test specimens using wire electrical discharge machining (EDM), tensile testing, Rockwell Superficial hardness testing, Vickers microhardness testing, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The effectiveness of the cleaning proceduremore » was evident in the pre- and post-cleaning photography and permitted accurate placement of the test specimens on the disks. Due to the limited amount of material available and the unique geometry of the disks, machine fixturing and test specimen design were critical aspects of this work. Multiple designs were considered and refined during mock-up test runs on unirradiated disks. The techniques used to successfully machine and test the various specimens will be presented along with a summary of important findings from the laboratory examinations.« less

Minimizing capture-related stress on white-tailed deer with a capture collar

USGS Publications Warehouse

DelGiudice, G.D.; Kunkel, K.E.; Mech, L.D.; Seal, U.S.

1990-01-01

We compared the effect of 3 capture methods for white-tailed deer (Odocoileus virginianus) on blood indicators of acute excitement and stress from 1 February to 20 April 1989. Eleven adult females were captured by Clover trap or cannon net between 1 February and 9 April 1989 in northeastern Minnesota [USA]. These deer were fitted with radio-controlled capture collars, and 9 deer were recaptured 7-33 days later. Trapping method affected serum cortisol (P < 0.0001), hemoglobin (Hb) (P < 0.06), and packed cell volume (PCV) (P < 0.07). Cortisol concentrations were lower (P < 0.0001) in capture-collared deer (0.54 .+-. 0.07 [SE] .mu.g/dL) compared to Clover-trapped (4.37 .+-. 0.69 .mu.g/dL) and cannon-netted (3.88 .+-. 0.82 .mu.g/dL) deer. Capture-collared deer were minimally stressed compared to deer captured by traditional methods. Use of the capture collar should permit more accurate interpretation of blood profiles of deer for assessement of condition and general health.

Factors associated with blue-collar workers' risk perception of cardiovascular disease.

PubMed

Hwang, Won Ju; Hong, Oisaeng; Kim, Mi Ja

2012-12-01

The purpose of this study was to investigate the contribution of actual cardiovascular disease (CVD) risk, as well as, individual, psychosocial, and work-related factors as predictors of CVD risk perception among Korean blue-collar workers. The participants were 238 Korean blue-collar workers who worked in small companies. Data were collected through a survey; anthropometric and blood pressure measures; and blood sampling for lipid levels. Blue-collar workers had high actual CVD risk and low CVD risk perception. The significant predictors of risk perception included perceived health status, alcohol consumption, knowledge of CVD risk, actual CVD risk, decision latitude, and shift work. The model explained 26% of the variance in CVD risk perception. The result suggests when occupational health nurses are giving routine health examination in small companies, they can enhance CVD risk perception in blue-collar workers by providing essential information about CVD risk factors and personal counseling on the individual worker's CVD risk status.

Comparison of peri-implant bone formation around injection-molded and machined surface zirconia implants in rabbit tibiae

PubMed Central

Kim, Hong-Kyun; Woo, Kyung mi; Shon, Won-Jun; Ahn, Jin-Soo; Cha, Seunghee; Park, Young-Seok

2017-01-01

The aim of this study was to compare osseointegration and surface characteristics of zirconia implants made by the powder injection molding (PIM) technique and made by the conventional milling procedure in rabbit tibiae. Surface characteristics of 2 types of implant were evaluated. Sixteeen rabbits received 2 types of external hex implants with similar geometry, machined zirconia implants and PIM zirconia implants, in the tibiae. Removal torque tests and histomorphometric analyses were performed. The roughness of PIM zirconia implants was higher than that of machined zirconia implants. The PIM zirconia implants exhibited significantly higher bone-implant contact and removal torque values than the machined zirconia implants (P < 0.001). The osseointegration of the PIM zirconia implant is promising, and PIM, using the roughened mold etching technique, can produce substantially rough surfaces on zirconia implants. PMID:26235717

Federal White-Collar Employee Salary Reform

DTIC Science & Technology

1990-03-21

Richard L. Fogel Assistant Comptroller General for General Government Programs GAO strongly endorses actions to reform federal white-collar employee pay...compensation levels for the employees who manage and operate the programs . -" - CONSIDERATION OP PERFORMANCE LEVELS IN MAKING SALARY ADJUSTMENTS In our...Best Available Copy "AD-A280 667 Uupted S&awe Gener.) AmumgM Ofie eA CNGAO Testimony Pot Release Pederi1 Whit--Collar Employee Salary Reform on

Testing tail-mounted transmitters with Myocastor coypus (nutria)

USGS Publications Warehouse

Merino, S.; Carter, J.; Thibodeaux, G.

2007-01-01

We developed a tail-mounted radio-transmitter for Myocastor coypus (nutria) that offers a practical and efficient alternative to collar or implant methods. The mean retention time was 96 d (range 57-147 d, n = 7), making this a practical method for short-term studies. The tail-mounts were less injurious to animals than collars and easier for field researchers to implement than either collars or surgically implanted transmitters.

Echinostoma macrorchis in Lao PDR: Metacercariae in Cipangopaludina Snails and Adults from Experimentally Infected Animals

PubMed Central

Sohn, Woon-Mok; Na, Byoung-Kuk; Yong, Tai-Soon; Eom, Keeseon S.; Park, Hansol; Min, Duk-Young; Rim, Han-Jong

2013-01-01

The echinostome metacercariae encysted in Cipangopaludina sp. snails that were purchased from a market in Vientiane Municipality, Lao PDR, were identified as Echinostoma macrorchis (Digenea: Echinostomatidae) through recovery of adult flukes after experimental infection to rats and a cat. The metacercariae were round, 113-128 (121)×113-125 (120) µm, having a thick cyst wall, a head collar armed with collar spines, and excretory granules. The adult flukes recovered from the rats and cat at day 14 and 30 post-infection, respectively, were elongated, ventrally curved, and 3.9-6.3×0.7-1.1 mm in size. The head collar was distinct, bearing 43-45 collar spines with 5 angle spines on each side. Two testes were large (as the name implies), tandem, and slightly constricted at the middle, with irregular margins. Eggs were operculated, ovoid to elliptical, and 88-95×56-60 µm. In scanning electron microscopy, the head collar was prominent, with 43-45 collar spines. Scale-like tegumental spines were densely distributed on the ventral surface between the oral and ventral suckers. Sensory papillae were distributed mainly on the tegument around the 2 suckers. It is confirmed that E. macrorchis is distributed in Lao PDR using Cipangopaludina sp. snails as the second intermediate host. PMID:23710086

Petasiger islandicus n. sp. (Digenea: Echinostomatidae) in the horned grebe Podiceps auritus (L.) (Aves: Podicipedidae) from Iceland.

PubMed

Kostadinova, Aneta; Skirnisson, Karl

2007-11-01

Petasiger islandicus n. sp. is described and figured from a demographically isolated population of the horned grebe Podiceps auritus auritus (L.) in Lake Mývatn (Iceland). This new species belongs to the group of species with 19 collar spines which possess a large elongate-oval cirrus-sac, well-developed pars prostatica and massive bulb-like cirrus. Within this group, P. islandicus appears most similar to P. oschmarini Kostadinova & Gibson, 1998, a form with similar body dimensions described from the same host, but differs in having a larger head collar, collar spines, oral sucker, pharynx, testes and sucker-width ratio, and a smaller cirrus-sac, cirrus and eggs. Two Nearctic species resemble P. islandicus in general morphology but differ as follows: P. pseudoneocomense Bravo-Hollis, 1969 has a larger body and collar width, notably shorter collar spines, smaller testes and sucker-width ratio, and a shorter but much wider cirrus-sac which is also smaller relative to the ventral sucker and almost entirely anterior to it; and P. caribbensis Nassi, 1980 has a smaller body, shorter collar spines and a seminal vesicle which is small in relation to the cirrus-sac, vitelline fields reaching anteriorly to the level of the genital pore and the intestinal bifurcation is located more anteriorly.

Men's mobility into management from blue collar and white collar jobs: race differences across the early work-career.

PubMed

Wilson, George; Maume, David

2014-07-01

Within the context of the "particularistic mobility thesis" we examine racial differences in the incidence, and determinants of, as well as timing to, mobility into management across the critical early career years at a refined level, namely, when groups share similar white collar and blue collar jobs. Findings from a Panel Study of Income Dynamics sample of men support theory and indicate that from both job levels a racial hierarchy exists: African Americans have the lowest rate of mobility, reach management through a route that is relatively formal and structured by a traditional range of stratification-based causal factors and take longest to reach management. Whites, in contrast, have the highest mobility rate, reach management through a relatively informal path that is less structured by traditional stratification-based factors, and reach management the quickest, and, across all three issues Latinos occupy an intermediate ground between African Americans and Latinos. Further, as predicted by theory, racial differences, particularly, relative to whites, are greater among those tracked from blue collar jobs than white collar jobs. Discussed are implications of the findings for understanding racial disadvantage in the American labor market across the work-career and on an inter-generational basis. Copyright © 2014 Elsevier Inc. All rights reserved.

Pilot biomonitoring of adults and children following use of chlorpyrifos shampoo and flea collars on dogs.

PubMed

Dyk, Melinda Bigelow; Chen, Zhenshan; Mosadeghi, Sasan; Vega, Helen; Krieger, Robert

2011-01-01

Pesticide handlers and pet owners who use products such as shampoos and dips and insecticide-impregnated collars to treat and control fleas on companion animals are exposed to a variety of active ingredients. Chlorpyrifos exposures of adults and children were measured using urine biomonitoring following use of over-the-counter products on dogs. Age and gender-specific measurements of urinary 3, 5, 6-trichloro-2-pyridinol (TCPy) revealed modest elevations of biomarker excretion following shampoo/dips. Smaller TCPy increments were measured following application of impregnated dog collars. The extent of indoor activity and potential pet contact were important determinants of urine biomarker level. Children without direct pet contact excreted more TCPy following collar application. Pet collars may be a source of indoor surface contamination and human exposure. Children excreted up to 4 times more TCPy than adults when urine volumes were adjusted using age-specific creatinine excretion levels. Although chlorpyrifos is no longer used in the United States in pet care products, results of this research provide perspective on the extent of human exposure from similar pet care products. These pilot studies demonstrated that pet care products such as insecticidal shampoos and dips and impregnated collars may expose family members to low levels of insecticide relative to toxic levels of concern.

A simulation study on garment manufacturing process

NASA Astrophysics Data System (ADS)

Liong, Choong-Yeun; Rahim, Nur Azreen Abdul

2015-02-01

Garment industry is an important industry and continues to evolve in order to meet the consumers' high demands. Therefore, elements of innovation and improvement are important. In this work, research studies were conducted at a local company in order to model the sewing process of clothes manufacturing by using simulation modeling. Clothes manufacturing at the company involves 14 main processes, which are connecting the pattern, center sewing and side neating, pockets sewing, backside-sewing, attaching the front and back, sleeves preparation, attaching the sleeves and over lock, collar preparation, collar sewing, bottomedge sewing, buttonholing sewing, removing excess thread, marking button, and button cross sewing. Those fourteen processes are operated by six tailors only. The last four sets of processes are done by a single tailor. Data collection was conducted by on site observation and the probability distribution of processing time for each of the processes is determined by using @Risk's Bestfit. Then a simulation model is developed using Arena Software based on the data collected. Animated simulation model is developed in order to facilitate understanding and verifying that the model represents the actual system. With such model, what if analysis and different scenarios of operations can be experimented with virtually. The animation and improvement models will be presented in further work.

Evaluation of an expandable, breakaway radiocollar for white-tailed deer fawns

USGS Publications Warehouse

Diefenbach, D.R.; Kochanny, C.O.; Vreeland, J.K.; Wallingford, B.D.

2003-01-01

We evaluated an expandable, breakaway VHF radiocollar design for use on white-tailed deer (Odocoileus virginianus) from birth to about 1 year of age. A similar collar design has been used on caribou (Rangifer tarandus), but we found that the collar did not expand quickly enough to accommodate increase in neck circumference of fawns during the first 2 months of life. Consequently, we modified the stitching pattern so that the first expansion fold opened faster. We monitored performance of this modification on free-ranging and captive fawns. Also, we collected data on neck growth in fawns to document design requirements of expandable collars for white-tailed deer. Mean neck circumference at ???14 days of age of free-ranging fawns in Pennsylvania was 17.8 cm (SD=1.67, n=62) for males and 17.3 cm (SD=1.50, n=52) for females. Based on measurements of captive fawns, neck circumference increased 8.8 cm from birth to August, 2.5 cm from August to October, and 2.6 cm from October to March. Observations of captive fawns fitted with dummy radiocollars indicated that collars expanded when needed and caused no apparent discomfort to fawns. We detected no problems with use of 86 collars on 113 free-ranging fawns for >270 days and recovered radiocollars expanded as designed. The elastic collar material failed on 3 collars (3%) after 142, 207, and 226 days on fawns, and 1-5 radiocollars (???4%) were cast by fawns. Our modification to this radiocollar design reduced fawn discomfort or suffering, allowing researchers to better comply with principles of the Animal Welfare Act.

A Canadian perspective on anterior cervical discectomies: practice patterns and preferences

PubMed Central

Bennardo, Michael; Farrokhyar, Forough; Martyniuk, Amanda; Reddy, Kesava

2018-01-01

Background The purpose of this study is to elucidate the current practice patterns of Canadian neurosurgeons with regards to anterior cervical discectomy (ACD). Methods A one-page questionnaire was sent out using SurveyMonkey to all neurosurgeon members of the Canadian Neurological Sciences Federation (CNSF). End points were surgeon preference for ACD surgical method, graft source, the length of collar usage and the recommended time before returning to work. Results Response rate was 74.0%. Of the responders, 75.0% performed single level ACD and 18.3% had completed spine fellowships. The majority (68.2%) chose ACD with fusion and plating (ACDFP) as their preferred method with allograft being the most popular choice of fusion material (44.3%). Most of the respondents did not prescribe collars (60.9%) and when they did, hard collar was prescribed most often (76.9%) and AspenTM collar was the most popular choice (67.7%). The majority of surgeons chose ‘other’ as their response for length of time for collar use (40.0%) while allowing them to take their collars off at night (78.1%). Most of the surgeons recommended physiotherapy post-operatively (58.1%) and time to physiotherapy was 6–8 weeks. Recommended back to work time was 6 weeks for 44.9% of respondents. In the cross analysis, surgeons who performed ACDF were more likely to prescribe collars (50%, P=0.01) versus surgeons who performed ACDFP (21.7%, P=0.01). Conclusions Our survey is an up to date description of current practice patterns for ACD amongst Canadian neurosurgeons. PMID:29732425

Artyfechinostomum malayanum: Metacercariae Encysted in Pila sp. Snails Purchased from Phnom Penh, Cambodia

PubMed Central

Sohn, Woon-Mok; Yong, Tai-Soon; Eom, Keeseon S.; Sinuon, Muth; Jeoung, Hoo-Gn; Chai, Jong-Yil

2017-01-01

The metacercariae of Artyfechinostomum malayanum (Leiper, 1911) Mendheim, 1943 were discovered in Pila sp. snails purchased from a market in Phnom Penh, Cambodia. They were isolated from the snails using the artificial digestion technique and were orally fed to 2 hamsters, 1 rat, and 2 mice to obtain the adult flukes. The metacercariae were round, 145–165 μm in diameter, having a cyst wall of 6–10 μm in thickness, a head collar and collar spines, and characteristic features of excretory granules. Adult flukes were recovered in the small intestines of the animals at days 14 and 32 post infection and were morphologically observed using a light microscope and a scanning electron microscope. They were plump or elongated, ventrally curved, 6.0–8.1×1.6–2.0 mm in size, and characterized by the head collar bearing 43 collar spines, including 5 end group ones on each side, a long cirrus sac extending beyond the posterior margin of the ventral sucker, a submedian ovary, and 2 deeply lobed testes. Eggs in uteri were operculate, ovoid to ellipsoid, and 120–135×68–75 μm in size. In scanning electron microscopy, the head collar was prominent with collar spines looking like horns. Scale-like tegumental spines were densely distributed on the ventral surface between the head collar and ventral sucker. Sensory papillae were distributed mainly on the tegument around suckers. By this study, it has been first confirmed that the life cycle of A. malayanum exists in Cambodia. PMID:28719961

Prophylactic treatment of flea-infested cats with an imidacloprid/flumethrin collar to forestall infection with Dipylidium caninum.

PubMed

Fourie, Josephus J; Crafford, Dionne; Horak, Ivan G; Stanneck, Dorothee

2012-07-27

The objective of the study was to determine the sustained effectiveness of 10% imidacloprid (w/w) and 4.5% flumethrin (w/w) incorporated in a slow-release matrix collar in preventing Dipylidium caninum infection in cats following repeated laboratory-infestations with fleas infected with metacestodes. Efficacy against infection with D. caninum was evaluated by infesting 16 cats with the flea Ctenocephalides felis felis infected with metacestodes of the tapeworm. Medicated collars were fitted to 8 of the cats and infestation of each cat with 200 fleas from a suitably infected batch commenced 7 days later and continued at weekly intervals until Day 28. Efficacy against fleas was evaluated 24 h after each infestation. Infection of the cats with D. caninum was verified by daily examination of the cats' faeces and immediate surroundings for proglottids from Day 21 to Day 60. Calculation of the prophylactic effectiveness of the collars in preventing infection of the cats with D. caninum was based on the difference in the geometric mean number of scoleces recovered from the gastrointestinal tracts of collared compared to untreated cats at necropsy on Day 61. Efficacy of the collars against infestation of the cats with fleas was 99.9% on Day 7 and 100% at each subsequent weekly assessment. Infection of the fleas with metacestodes was ≥40% in 7 to 13 day old fleas, but progressively decreased thereafter. At necropsy all the control cats were infected with D. caninum and harboured between 19 and 346 scoleces with a geometric mean of 58.3. A single treated cat was infected and harboured 2 scoleces. Effective prevention of infection with D. caninum, based on a comparison of the geometric mean numbers of scoleces recovered from control and treated cats, was 99.7%. The insecticidal components of the medicated collars are capable of rapidly eliminating newly-acquired infestations of fleas that are infected with the metacestodes of D. caninum, thus preventing infection with the cestode in collared cats.

Does Shoe Collar Height Influence Ankle Joint Kinematics and Kinetics in Sagittal Plane Maneuvers?

PubMed Central

Yang, Yang; Fang, Ying; Zhang, Xini; He, Junliang; Fu, Weijie

2017-01-01

The Objective of the study is to investigate the effects of basketball shoes with different collar heights on ankle kinematics and kinetics and athletic performance in different sagittal plane maneuvers. Twelve participants who wore high-top and low-top basketball shoes (hereafter, HS and LS, respectively) performed a weight-bearing dorsiflexion (WB-DF) maneuver, drop jumps (DJs), and lay-up jumps (LJs). Their sagittal plane kinematics and ground reaction forces were recorded using the Vicon motion capture system and Kistler force plates simultaneously. Moreover, ankle dorsiflexion and plantarflexion angles, moment, power, stiffness, and jump height were calculated. In the WB-DF test, the peak ankle dorsiflexion angle (p = 0.041) was significantly smaller in HS than in LS. Additionally, the peak ankle plantarflexion moment (p = 0.028) and power (p = 0.022) were significantly lower in HS than in LS during LJs but not during DJs. In both jumping maneuvers, no significant differences were found in the jump height or ankle kinematics between the two shoe types. According to the WB-DF test, increasing shoe collar height can effectively reduce the ankle range of motion in the sagittal plane. Although the HS did not restrict the flexion–extension performance of the ankle joint during two jumping maneuvers, an increased shoe collar height can reduce peak ankle plantarflexion moment and peak power during the push-off phase in LJs. Therefore, a higher shoe collar height should be used to circumvent effects on the partial kinetics of the ankle joint in the sagittal plane. Key points An increased shoe collar height effectively reduced ankle joint ROM in the sagittal plane in weight-bearing dorsiflexion maneuver. Shoe collar height did not affect sagittal plane ankle kinematics and had no effect on performance during realistic jumping. Shoe collar height can affect the ankle plantarflexion torque and peak power during the push-off phase in lay-up jump. PMID:29238255

Analysis of head impact exposure and brain microstructure response in a season-long application of a jugular vein compression collar: a prospective, neuroimaging investigation in American football.

PubMed

Myer, Gregory D; Yuan, Weihong; Barber Foss, Kim D; Thomas, Staci; Smith, David; Leach, James; Kiefer, Adam W; Dicesare, Chris; Adams, Janet; Gubanich, Paul J; Kitchen, Katie; Schneider, Daniel K; Braswell, Daniel; Krueger, Darcy; Altaye, Mekibib

2016-10-01

Historical approaches to protect the brain from outside the skull (eg, helmets and mouthpieces) have been ineffective in reducing internal injury to the brain that arises from energy absorption during sports-related collisions. We aimed to evaluate the effects of a neck collar, which applies gentle bilateral jugular vein compression, resulting in cerebral venous engorgement to reduce head impact energy absorption during collision. Specifically, we investigated the effect of collar wearing during head impact exposure on brain microstructure integrity following a competitive high school American football season. A prospective longitudinal controlled trial was employed to evaluate the effects of collar wearing (n=32) relative to controls (CTRL; n=30) during one competitive football season (age: 17.04±0.67 years). Impact exposure was collected using helmet sensors and white matter (WM) integrity was quantified based on diffusion tensor imaging (DTI) serving as the primary outcome. With similar overall g-forces and total head impact exposure experienced in the two study groups during the season (p>0.05), significant preseason to postseason changes in mean diffusivity, axial diffusivity and radial diffusivity in the WM integrity were noted in the CTRL group (corrected p<0.05) but not in the collar group (p>0.05). The CTRL group demonstrated significantly larger preseason to postseason DTI change in multiple WM regions compared with the collar group (corrected p<0.05). Reduced WM diffusivity alteration was noted in participants wearing a neck collar after a season of competitive football. Collar wearing may have provided a protective effect against brain microstructural changes after repetitive head impacts. NCT02696200. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

“Investigations on the machinability of Waspaloy under dry environment”

NASA Astrophysics Data System (ADS)

Deepu, J.; Kuppan, P.; SBalan, A. S.; Oyyaravelu, R.

2016-09-01

Nickel based superalloy, Waspaloy is extensively used in gas turbine, aerospace and automobile industries because of their unique combination of properties like high strength at elevated temperatures, resistance to chemical degradation and excellent wear resistance in many hostile environments. It is considered as one of the difficult to machine superalloy due to excessive tool wear and poor surface finish. The present paper is an attempt for removing cutting fluids from turning process of Waspaloy and to make the processes environmentally safe. For this purpose, the effect of machining parameters such as cutting speed and feed rate on the cutting force, cutting temperature, surface finish and tool wear were investigated barrier. Consequently, the strength and tool wear resistance and tool life increased significantly. Response Surface Methodology (RSM) has been used for developing and analyzing a mathematical model which describes the relationship between machining parameters and output variables. Subsequently ANOVA was used to check the adequacy of the regression model as well as each machining variables. The optimal cutting parameters were determined based on multi-response optimizations by composite desirability approach in order to minimize cutting force, average surface roughness and maximum flank wear. The results obtained from the experiments shown that machining of Waspaloy using coated carbide tool with special ranges of parameters, cutting fluid could be completely removed from machining process

Three-dimensional machining of carbon nanotube forests using water-assisted scanning electron microscope processing

NASA Astrophysics Data System (ADS)

Rajabifar, Bahram; Kim, Sanha; Slinker, Keith; Ehlert, Gregory J.; Hart, A. John; Maschmann, Matthew R.

2015-10-01

We demonstrate that vertically aligned carbon nanotubes (CNTs) can be precisely machined in a low pressure water vapor ambient using the electron beam of an environmental scanning electron microscope. The electron beam locally damages the irradiated regions of the CNT forest and also dissociates the water vapor molecules into reactive species including hydroxyl radicals. These species then locally oxidize the damaged region of the CNTs. The technique offers material removal capabilities ranging from selected CNTs to hundreds of cubic microns. We study how the material removal rate is influenced by the acceleration voltage, beam current, dwell time, operating pressure, and CNT orientation. Milled cuts with depths between 0-100 microns are generated, corresponding to a material removal rate of up to 20.1 μm3/min. The technique produces little carbon residue and does not disturb the native morphology of the CNT network. Finally, we demonstrate direct machining of pyramidal surfaces and re-entrant cuts to create freestanding geometries.

Three-dimensional machining of carbon nanotube forests using water-assisted scanning electron microscope processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rajabifar, Bahram; Maschmann, Matthew R., E-mail: MaschmannM@missouri.edu; Kim, Sanha

2015-10-05

We demonstrate that vertically aligned carbon nanotubes (CNTs) can be precisely machined in a low pressure water vapor ambient using the electron beam of an environmental scanning electron microscope. The electron beam locally damages the irradiated regions of the CNT forest and also dissociates the water vapor molecules into reactive species including hydroxyl radicals. These species then locally oxidize the damaged region of the CNTs. The technique offers material removal capabilities ranging from selected CNTs to hundreds of cubic microns. We study how the material removal rate is influenced by the acceleration voltage, beam current, dwell time, operating pressure, andmore » CNT orientation. Milled cuts with depths between 0–100 microns are generated, corresponding to a material removal rate of up to 20.1 μm{sup 3}/min. The technique produces little carbon residue and does not disturb the native morphology of the CNT network. Finally, we demonstrate direct machining of pyramidal surfaces and re-entrant cuts to create freestanding geometries.« less

Study of energy parameters of machine parts of water-ice jet cleaning applications

NASA Astrophysics Data System (ADS)

Prezhbilov, A. N.; Burnashov, M. A.

2018-03-01

The reader will achieve a benchmark understanding of the essence of cleaning for the removal of contaminants from machine elements by means of cryo jet/water-ice jet with particles prepared beforehand. This paper represents the classification of the most common contaminants appearing on the surfaces of machine elements after a long-term service. The conceptual contribution of the paper is to represent a thermo-physical model of contaminant removal by means of a water ice jet. In conclusion, it is evident that this study has shown the dependencies between the friction force of an ice particle with an obstacle (contamination), a dimensional change of an ice particle in the cleaning process and the quantity of heat transmitted to an ice particle.

Superconducting cable-in-conduit low resistance splice

DOEpatents

Artman, Thomas A.

2003-06-24

A low resistance splice connects two cable-in-conduit superconductors to each other. Dividing collars for arranging sub-cable units from each conduit are provided, along with clamping collars for mating each sub-cable wire assembly to form mated assemblies. The mated assemblies ideally can be accomplished by way of splicing collar. The mated assemblies are cooled by way of a flow of coolant, preferably helium. A method for implementing such a splicing is also described.

Employee Involvement White Collar Work Force (Phase 1)

DTIC Science & Technology

1991-07-01

TITLE AND SUBTITLE Employee Involvement White Collar Work Force (Phase 1) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...N COMMITTEE August 1991 NSRP 0337 AL EFFECTS TRANSFER Employee Involvement White Collar Work Force (Phase 1) UNITED STATES NAVY David Taylor Research...report. AS used In the above, “Persons acting on behalf of the United States Navy” includes any employee , contractor, or subcontractor to the

Australian blue-collar men's health and well-being: contextual issues for workplace health promotion interventions.

PubMed

Du Plessis, Karin; Cronin, David; Corney, Tim; Green, Emma

2013-09-01

In Australia, blue-collar workers are predominantly male and form a unique and large (approximately 30%) subset of the Australian workforce. They exhibit particular health-related issues and, in comparison to other groups, often a lack of health promoting behavior. This article briefly discusses the Australian context and some of the key health issues blue-collar men face, in particular as it relates to construction workers. It reviews the impact of gender and socioeconomic factors in designing workplace health promotion interventions. This article considers practice strategies for health promoters in a specific workplace setting: it looks at meta-factors and industry-based contextual factors, including barriers to implementation and participation, while addressing common misconceptions about Australian blue-collar workers.

Effects of temperature on the removal efficiency of KDP crystal during the process of magnetorheological water-dissolution polishing.

PubMed

Zhang, Yifan; Dai, Yifan; Tie, Guipeng; Hu, Hao

2016-10-10

As a kind of important nonlinear optical element, KDP crystal has great demand in the inertial confinement fusion system. Based on the dissolution mechanism of solid materials, the factors that affect the material removal rate of KDP crystal in magnetorheological (MR) water-dissolution polishing are investigated to improve the machining efficiency. It is found that the material removal rate is proportional to the product of the saturation concentration and diffusion coefficient, and the relationship between the removal efficiency and the temperature meets the unilateral Gaussian function. Polishing experiments are carried out on a magnetorheological finishing (MRF) machine with self-designed MRF fluid heating devices. The experimental results show that practical efficiency-temperature curve is consistent with the theoretical curve, and the maximum machining efficiency increases by about 50% with the rise of temperature from 294 to 302 K. Meanwhile, when the MR fluid temperature is lower than 308 K, the crystal surface quality and surface roughness in different processing temperatures have no remarkable difference with constant crystal temperature (294 K). This research indicates that it is feasible to drastically improve KDP crystal MRF efficiency by controlling the processing temperature.

Effects of pulse ON and OFF time and electrode types on the material removal rate and tool wear rate of the Ti-6Al-4V Alloy using EDM machining with reverse polarity

NASA Astrophysics Data System (ADS)

Praveen, L.; Geeta Krishna, P.; Venugopal, L.; Prasad, N. E. C.

2018-03-01

Electrical Discharge Machining (EDM) is an unconventional metal removal process that is extensively used for removing the difficult-to-machine metal such as Ti alloys, super alloys and metal matrix composites. This paper investigates the effects of pulse (ON/OFF) time on EDM machining characteristics of Ti-6Al-4V alloy using copper and graphite as electrodes in reverse polarity condition. Full factorial design method was used to design the experiments. Two variables (Pulse On and OFF) with three levels are considered. The output variables are the tool wear rate and the material removal rate. The important findings from the present work are: (1) the material removal rate (MRR) increases gradually with an increase of the Pulse ON time whereas the change is insignificant with an increase of the Pulse OFF time, (2) Between copper and graphite electrodes, the copper electrode is proved to be good in terms of MRR, (3) a combination of high pulse ON time and OFF time is desirable for high MRR rate in the Cu electrode whereas for the graphite electrode, a combination of high pulse ON time and low pulse OFF time is desirable for high MRR rate, (4) the tool wear rate (TWR) reduces with the Pulse On or OFF time, the rate of TWR is uniform for the graphite electrode in contrast to abrupt decrease from 25 to 50 μs (pulse ON time) in the copper electrode, (5) In order to keep the TWR as minimum possible, it is desirable to have a combination of high pulse ON time and OFF time for both the copper and the graphite electrode.

Ion beam figuring of high-slope surfaces based on figure error compensation algorithm.

PubMed

Dai, Yifan; Liao, Wenlin; Zhou, Lin; Chen, Shanyong; Xie, Xuhui

2010-12-01

In a deterministic figuring process, it is critical to guarantee high stability of the removal function as well as the accuracy of the dwell time solution, which directly influence the convergence of the figuring process. Hence, when figuring steep optics, the ion beam is required to keep a perpendicular incidence, and a five-axis figuring machine is typically utilized. In this paper, however, a method for high-precision figuring of high-slope optics is proposed with a linear three-axis machine, allowing for inclined beam incidence. First, the changing rule of the removal function and the normal removal rate with the incidence angle is analyzed according to the removal characteristics of ion beam figuring (IBF). Then, we propose to reduce the influence of varying removal function and projection distortion on the dwell time solution by means of figure error compensation. Consequently, the incident ion beam is allowed to keep parallel to the optical axis. Simulations and experiments are given to verify the removal analysis. Finally, a figuring experiment is conducted on a linear three-axis IBF machine, which proves the validity of the method for high-slope surfaces. It takes two iterations and about 9 min to successfully figure a fused silica sample, whose aperture is 21.3 mm and radius of curvature is 16 mm. The root-mean-square figure error of the convex surface is reduced from 13.13 to 5.86 nm.

Performance and Surface Integrity of Ti6Al4V After Sinking EDM with Special Graphite Electrodes

NASA Astrophysics Data System (ADS)

Amorim, Fred L.; Stedile, Leandro J.; Torres, Ricardo D.; Soares, Paulo C.; Henning Laurindo, Carlos A.

2014-04-01

Titanium and its alloys have high chemical reactivity with most of the cutting tools. This makes it difficult to work with these alloys using conventional machining processes. Electrical discharge machining (EDM) emerges as an alternative technique to machining these materials. In this work, it is investigated the performance of three special grades of graphite as electrodes when ED-Machining Ti6Al4V samples under three different regimes. The main influences of electrical parameters are discussed for the samples material removal rate, volumetric relative wear and surface roughness. The samples surfaces were evaluated using SEM images, microhardness measurements, and x-ray diffraction. It was found that the best results for samples material removal rate, surface roughness, and volumetric relative wear were obtained for the graphite electrode with 10-μm particle size and negative polarity. For all samples machined by EDM and characterized by x-ray (XRD), it was identified the presence of titanium carbides. For the finish EDM regimes, the recast layer presents an increased amount of titanium carbides compared to semi-finish and rough regimes.

Practical aspects of the use of three-phase alternating current electric machines in electricity storage system

NASA Astrophysics Data System (ADS)

Ciucur, Violeta

2015-02-01

Of three-phase alternating current electric machines, it brings into question which of them is more advantageous to be used in electrical energy storage system by pumping water. The two major categories among which are given dispute are synchronous and the asynchronous machine. To consider the synchronous machine with permanent magnet configuration because it brings advantages compared with conventional synchronous machine, first by removing the necessary additional excitation winding. From the point of view of loss of the two types of machines, the optimal adjustment of the magnetic flux density is obtained to minimize the copper loss by hysteresis and eddy currents.

Ontogeny of the collar cord: neurulation in the hemichordate Saccoglossus kowalevskii.

PubMed

Kaul, Sabrina; Stach, Thomas

2010-10-01

The chordate body plan is characterized by a central notochord, a pharynx perforated by gill pores, and a dorsal central nervous system. Despite progress in recent years, the evolutionary origin of each of theses characters remains controversial. In the case of the nervous system, two contradictory hypotheses exist. In the first, the chordate nervous system is derived directly from a diffuse nerve net; whereas, the second proposes that a centralized nervous system is found in hemichordates and, therefore, predates chordate evolution. Here, we document the ontogeny of the collar cord of the enteropneust Saccoglossus kowalevskii using transmission electron microscopy and 3D-reconstruction based on completely serially sectioned stages. We demonstrate that the collar cord develops from a middorsal neural plate that is closed in a posterior to anterior direction. Transversely oriented ependymal cells possessing myofilaments mediate this morphogenetic process and surround the remnants of the neural canal in juveniles. A mid-dorsal glandular complex is present in the collar. The collar cord in juveniles is clearly separated into a dorsal saddle-like region of somata and a ventral neuropil. We characterize two cell types in the somata region, giant neurons and ependymal cells. Giant neurons connect via a peculiar cell junction that seems to function in intercellular communication. Synaptic junctions containing different vesicle types are present in the neuropil. These findings support the hypotheses that the collar cord constitutes a centralized element of the nervous system and that the morphogenetic process in the ontogeny of the collar cord is homologous to neurulation in chordates. Moreover, we suggest that these similarities are indicative of a close phylogenetic relationship between enteropneusts and chordates. ©2010 Wiley-Liss, Inc.

Echinostoma macrorchis (Digenea: Echinostomatidae): Metacercariae in Cipangopaludina chinensis malleata Snails and Adults from Experimental Rats in Korea.

PubMed

Sohn, Woon-Mok; Na, Byoung-Kuk

2017-10-01

A survey was performed to know the infection status of echinostome metacercariae in Cipangopaludina chinensis malleata snails from Korea. Total 75 snails collected in 5 localities, i.e., Imsil-gun, Jeollabuk-do, Hwasun-gun and Shinan-gun (Aphae and Jido), Jeollanam-do, and Jinju-si, Gyeongsangnam-do, were examined for metacercariae by the artificial digestion method. Infection rates of metacercariae were 80.0%, 66.7%, 100%, 60.0%, and 73.3%, and their densities were 39, 32, 183, 19, and 30 per snail infected, respectively. The metacercariae were round, 105-118×105-118 μm in size, with a thin cyst wall, collar spines on the head collar, and excretory granules in 2 canals of excretory tube. Adult flukes were elongated, ventrally curved, and 5,167×939 μm in average size. Head collar distinct, bearing 45 collar spines with 5 end groups on each side. Oral sucker subterminal, pharynx well developed, and esophagus somewhat short. Cirrus sac well developed, with a saccular seminal vesicle, and ventral sucker very large. Ovary elliptical and on the median line of the body. Testes tandem and slightly lobed. Eggs operculated, elliptical, and 90-103×55-60 μm in size. By scanning electron microscopy, the head collar was prominent with 45 collar spines resembling horns of younger stags. Scale-like tegumental spines were densely distributed on the body surface between the head collar and ventral sucker. Conclusively, it has been first confirmed that the life cycle of E. macrorchis is indigenously maintained in Korea, and C. chinensis malleata snails are popularly infected with the metacercariae of this echinostome.

The Role of Occupational Status in the Association between Job Strain and Ambulatory Blood Pressure during Working and Nonworking Days

PubMed Central

Joseph, Nataria T.; Muldoon, Matthew F.; Manuck, Stephen B.; Matthews, Karen A.; MacDonald, Leslie A.; Grosch, James; Kamarck, Thomas W.

2016-01-01

Objective The objectives of this study were to determine whether job strain is more strongly associated with higher ambulatory blood pressure (ABP) among blue-collar workers compared to white-collar workers; to examine whether this pattern generalizes across working and nonworking days and across sex; and to examine whether this pattern is accounted for by psychosocial factors or health behaviors during daily life. Methods 480 healthy workers (mean age = 43; 53% female)in the Adult Health and Behavior Project – Phase 2 (AHAB-II)completed ABP monitoring during 3 working days and 1 nonworking day. Job strain was operationalized as high psychological demand (> sample median) combined with low decision latitude (< sample median) (Karasek model; Job Content Questionnaire). Results Covariate-adjusted multilevel random coefficients regressions demonstrated that associations between job strain and systolic and diastolic ABP were stronger among blue-collar workers compared to white-collar workers (b = 6.53, F(1, 464)= 3.89, p = .049 and b = 5.25, F(1, 464)= 6.09, p = .014, respectively). This pattern did not vary by sex but diastolic ABP findings were stronger when participants were at work. The stronger association between job strain and ABP among blue-collar workers was not accounted for by education, momentary physical activity or substance use, but was partially accounted for by covariation between higher hostility and blue-collar status. Conclusions Job strain is associated with ABP among blue-collar workers. These results extend previous findings to a mixed-sex sample and nonworking days and provide, for the first time, comprehensive exploration of several behavioral and psychosocial explanations for this finding. PMID:27359177

Prevalence and Health Correlates of Work-Life Conflict among Blue- and White-Collar Workers from Different Economic Sectors

PubMed Central

Hämmig, Oliver

2014-01-01

The research on work-life conflict (WLC) is largely neglected in occupational medicine and public health and typically limited to white-collar workers and public servants. This study therefore aims to explore possible differences in the prevalence of WLC and its association with health outcomes between white- and blue-collar workers from different work environments in Switzerland. Cross-sectional survey data collected in 2007 in the service sector and in 2010 in the industrial sector were used for statistical analyses. A subsample of university graduates employed by large service companies (N = 1,170) from the first survey’s population was taken and compared with a subsample of low or unskilled industrial and construction workers with no or only compulsory education (N = 489) from the second survey’s population. The results show almost consistently, and particularly in women, a lower prevalence of time- and strain-based forms and both causal directions of WLC in blue-collar workers. However, associations between different WLC measures and general, physical and mental health outcomes were found to be equally strong or even stronger among blue-collar workers compared to white-collar workers. Low or unskilled industrial and construction workers are less frequently affected by higher degrees of WLC but are then at no lower risk of suffering poor self-rated health or severe backaches and sleep disorders than university graduates working in the service sector with comparable exposure to WLC. In conclusion, it can be stated that WLC turned out to be much less prevalent but equally or even more detrimental to health in blue-collar workers, who therefore need to be considered in future studies. PMID:25426483

Echinostoma macrorchis (Digenea: Echinostomatidae): Metacercariae in Cipangopaludina chinensis malleata Snails and Adults from Experimental Rats in Korea

PubMed Central

Sohn, Woon-Mok; Na, Byoung-Kuk

2017-01-01

A survey was performed to know the infection status of echinostome metacercariae in Cipangopaludina chinensis malleata snails from Korea. Total 75 snails collected in 5 localities, i.e., Imsil-gun, Jeollabuk-do, Hwasun-gun and Shinan-gun (Aphae and Jido), Jeollanam-do, and Jinju-si, Gyeongsangnam-do, were examined for metacercariae by the artificial digestion method. Infection rates of metacercariae were 80.0%, 66.7%, 100%, 60.0%, and 73.3%, and their densities were 39, 32, 183, 19, and 30 per snail infected, respectively. The metacercariae were round, 105–118×105–118 μm in size, with a thin cyst wall, collar spines on the head collar, and excretory granules in 2 canals of excretory tube. Adult flukes were elongated, ventrally curved, and 5,167×939 μm in average size. Head collar distinct, bearing 45 collar spines with 5 end groups on each side. Oral sucker subterminal, pharynx well developed, and esophagus somewhat short. Cirrus sac well developed, with a saccular seminal vesicle, and ventral sucker very large. Ovary elliptical and on the median line of the body. Testes tandem and slightly lobed. Eggs operculated, elliptical, and 90–103×55–60 μm in size. By scanning electron microscopy, the head collar was prominent with 45 collar spines resembling horns of younger stags. Scale-like tegumental spines were densely distributed on the body surface between the head collar and ventral sucker. Conclusively, it has been first confirmed that the life cycle of E. macrorchis is indigenously maintained in Korea, and C. chinensis malleata snails are popularly infected with the metacercariae of this echinostome. PMID:29103269

Using computerised surface wound mapping to compare the potential medical effectiveness of Enhanced Protection Under Body Armour Combat Shirt collar designs.

PubMed

Breeze, John; Allanson-Bailey, L C; Hunt, N C; Delaney, R; Hepper, A E; Lewis, E A

2015-03-01

Protecting the neck from explosively propelled fragments has traditionally been achieved through a collar attached to the ballistic vest. An Enhanced Protection Under Body Armour Combat Shirt (EP-UBACS) collar has been identified as an additional method of providing neck protection but limited evidence as to its potential medical effectiveness exists to justify its procurement. Entry wound locations and resultant medical outcomes were determined using Abbreviated Injury Scale (AIS) for all fragmentation neck wounds sustained by UK soldiers between 01 January 2010 and 31 December 2011. Data were prospectively entered into a novel computerised tool base and comparisons made between three EP-UBACS neck collar designs in terms of predicted reduction in AIS scores. All collars reduced AIS scores, with the greatest reduction provided by designs incorporating increased standoff from the neck and an additional semi-circle of ballistic material underneath the collar at the front and back. This technique confirms that reinforcing the neck collar of an EP-UBACS would be expected to reduce injury severity from neck wounds. However, without knowledge of entry wound locations for injuries to other body areas as well as the use of AIS scores without clinical or pathological verification its further use in the future may be limited. The ability to overlay any armour design onto a standardised human was potentially the most useful part of this tool and we would recommend developing this technique using underlying anatomical structures and not just the skin surface. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

An evaluation of the accuracy and performance of lightweight GPS collars in a suburban environment.

PubMed

Adams, Amy L; Dickinson, Katharine J M; Robertson, Bruce C; van Heezik, Yolanda

2013-01-01

The recent development of lightweight GPS collars has enabled medium-to-small sized animals to be tracked via GPS telemetry. Evaluation of the performance and accuracy of GPS collars is largely confined to devices designed for large animals for deployment in natural environments. This study aimed to assess the performance of lightweight GPS collars within a suburban environment, which may be different from natural environments in a way that is relevant to satellite signal acquisition. We assessed the effects of vegetation complexity, sky availability (percentage of clear sky not obstructed by natural or artificial features of the environment), proximity to buildings, and satellite geometry on fix success rate (FSR) and location error (LE) for lightweight GPS collars within a suburban environment. Sky availability had the largest affect on FSR, while LE was influenced by sky availability, vegetation complexity, and HDOP (Horizontal Dilution of Precision). Despite the complexity and modified nature of suburban areas, values for FSR (mean= 90.6%) and LE (mean = 30.1 m) obtained within the suburban environment are comparable to those from previous evaluations of GPS collars designed for larger animals and within less built-up environments. Due to fine-scale patchiness of habitat within urban environments, it is recommended that resource selection methods that are not reliant on buffer sizes be utilised for selection studies.

DNA Bipedal Motor Achieves a Large Number of Steps Due to Operation Using Microfluidics-Based Interface.

PubMed

Tomov, Toma E; Tsukanov, Roman; Glick, Yair; Berger, Yaron; Liber, Miran; Avrahami, Dorit; Gerber, Doron; Nir, Eyal

2017-04-25

Realization of bioinspired molecular machines that can perform many and diverse operations in response to external chemical commands is a major goal in nanotechnology, but current molecular machines respond to only a few sequential commands. Lack of effective methods for introduction and removal of command compounds and low efficiencies of the reactions involved are major reasons for the limited performance. We introduce here a user interface based on a microfluidics device and single-molecule fluorescence spectroscopy that allows efficient introduction and removal of chemical commands and enables detailed study of the reaction mechanisms involved in the operation of synthetic molecular machines. The microfluidics provided 64 consecutive DNA strand commands to a DNA-based motor system immobilized inside the microfluidics, driving a bipedal walker to perform 32 steps on a DNA origami track. The microfluidics enabled removal of redundant strands, resulting in a 6-fold increase in processivity relative to an identical motor operated without strand removal and significantly more operations than previously reported for user-controlled DNA nanomachines. In the motor operated without strand removal, redundant strands interfere with motor operation and reduce its performance. The microfluidics also enabled computer control of motor direction and speed. Furthermore, analysis of the reaction kinetics and motor performance in the absence of redundant strands, made possible by the microfluidics, enabled accurate modeling of the walker processivity. This enabled identification of dynamic boundaries and provided an explanation, based on the "trap state" mechanism, for why the motor did not perform an even larger number of steps. This understanding is very important for the development of future motors with significantly improved performance. Our universal interface enables two-way communication between user and molecular machine and, relying on concepts similar to that of solid-phase synthesis, removes limitations on the number of external stimuli. This interface, therefore, is an important step toward realization of reliable, processive, reproducible, and useful externally controlled DNA nanomachines.

Chemical and Physical Exposures in the Emerging US Green Collar Workforce

PubMed Central

Chen, Charles J.; Moore, Kevin J.; Fernandez, Cristina A.; Arheart, Kristopher L.; LeBlanc, William G.; Cifuentes, Manuel; McClure, Laura A.; Christ, Sharon L.; Fleming, Lora E.; Lee, David J.; Caban-Martinez, Alberto J.

2017-01-01

Objective “Green collar” workers serve in occupations that directly improve environmental quality and sustainability. This study estimates and compares the prevalence of select physical and chemical exposures among green versus non-green U.S. workers. Methods Data from the U.S. 2010 National Health Interview Survey(NHIS) Occupational Health Supplement were linked to the Occupational Information Network(O*NET) Database. We examined four main exposures:1)vapors, gas, dust, fumes(VGDF);2)secondhand tobacco smoke;3)skin hazards;4)outdoor work. Results Green collar workers were significantly more likely to report exposure to VGDF and outdoor work than non-green collar workers(Adjusted Odds Ratio[AOR]=1.25; 95% CI=1.11–1.40; AOR=1.44(1.26–1.63), respectively). Green collar workers were less likely to be exposed to chemicals(AOR=0.80; 0.69–0.92). Conclusions Green collar workers appear to be at greater risk for select workplace exposures. As the green industry continues to grow, it is important to identify these occupational hazards in order to maximize worker health. PMID:28490043

Electrode systems for in situ vitrification

DOEpatents

Buelt, James L.; Carter, John G.; Eschbach, Eugene A.; FitzPatrick, Vincent F.; Koehmstedt, Paul L.; Morgan, William C.; Oma, Kenton H.; Timmerman, Craig L.

1990-01-01

An electrode comprising a molybdenum rod is received within a conductive collar formed of graphite. The molybdenum rod and the graphite collar may be physically joined at the bottom. A pair of such electrodes are placed in soil containing buried waste material and an electric current is passed therebetween for vitrifying the soil. The graphite collar enhances the thermal conductivity of the combination, bringing heat to the surface, and preventing formation of a cold cap of material above the ground surface. The annulus between the molybdenum rod electrode and the graphite collar is suitably filled with a conductive ceramic powder that sinters upon the molybdenum rod, protecting the same from oxidation as graphite material is consumed, or a metal powder which liquefies at operating temperatures. The center of the molybdenum rod, used with a collar of separately, can be hollow and filled with a powdered metal, such as copper, which liquefies at operating temperatures. Connection to electrodes can be provided below ground level to avoid open circuit due to electrode deterioration, or sacrificial electrodes may be employed when operation is started. Outboard electrodes cna be utilized to square up a vitrified area.

Re-evaluation of the species composition of Bashkirovitrema Skrjabin, 1944 (Digenea: Echinostomatidae), with the description of two new species of this genus and the proposal of Kostadinovatrema novaeguiniense n. g., n. sp.

PubMed

Dronen, Norman O

2009-11-01

A comparison of specimens previously identified as Bashkirovitrema incrassatum (Diesing, 1850) from the African or cape clawless otter Aonyx capensis, and the speckle-throated or spotted-throated otter Hydrictis maculicollis from the Old World with specimens and descriptions of B. incrassatum from the New World showed that those from Africa (Bashkirovitrema africanum n. sp.) had a more extensive distribution of the vitelline fields than either B. canadense n. sp. from the northern river otter Lontra canadensis and the American mink Neovison vison (North America) and B. incrassatum from the Neotropical river otter Lontra longicaudis (South America). B. africanum n. sp. further differs from B. canadense n. sp. by having a smaller body, shorter forebody, smaller oral sucker, longer cirrus, shorter intertesticular space, shorter post-testicular space and longer eggs. B. canadense n. sp. can be distinguished from B. incrassatum by having a longer body, longer forebody, smaller sucker ratio, smaller testes, greater distance between the ventral sucker and the ovary, shorter cirrus-sac, longer post-testicular space and narrower eggs. B. africanum n. sp. differs from B. incrassatum by having a smaller ventral sucker, larger ovary, shorter cirrus-sac, smaller intertesticular space, larger post-testicular space and longer eggs that are not as wide. Kostadinovatrema n. g., as represented by K. novaeguiniense n. sp., can be separated from species of Bashkirovitrema Skrjabin, 1944 by having a wider body width to length profile, a head collar that is narrower than the forebody and armed with 33 rather than 27 collar spines, an ovary that is further removed anteriorly from the testes, and a dorso-ventrally flattened hindbody that is nearly as broad as the forebody. The new genus differs from Hypoderaeum Dietz, 1909 and Moliniella Hübner, 1939 by having 33 head collar spines.

Lightweight GPS-tags, one giant leap for wildlife tracking? An assessment approach.

PubMed

Recio, Mariano R; Mathieu, Renaud; Denys, Paul; Sirguey, Pascal; Seddon, Philip J

2011-01-01

Recent technological improvements have made possible the development of lightweight GPS-tagging devices suitable to track medium-to-small sized animals. However, current inferences concerning GPS performance are based on heavier designs, suitable only for large mammals. Lightweight GPS-units are deployed close to the ground, on species selecting micro-topographical features and with different behavioural patterns in comparison to larger mammal species. We assessed the effects of vegetation, topography, motion, and behaviour on the fix success rate for lightweight GPS-collar across a range of natural environments, and at the scale of perception of feral cats (Felis catus). Units deployed at 20 cm above the ground in sites of varied vegetation and topography showed that trees (native forest) and shrub cover had the largest influence on fix success rate (89% on average); whereas tree cover, sky availability, number of satellites and horizontal dilution of position (HDOP) were the main variables affecting location error (±39.5 m and ±27.6 m before and after filtering outlier fixes). Tests on HDOP or number of satellites-based screening methods to remove inaccurate locations achieved only a small reduction of error and discarded many accurate locations. Mobility tests were used to simulate cats' motion, revealing a slightly lower performance as compared to the fixed sites. GPS-collars deployed on 43 cats showed no difference in fix success rate by sex or season. Overall, fix success rate and location error values were within the range of previous tests carried out with collars designed for larger species. Lightweight GPS-tags are a suitable method to track medium to small size species, hence increasing the range of opportunities for spatial ecology research. However, the effects of vegetation, topography and behaviour on location error and fix success rate need to be evaluated prior to deployment, for the particular study species and their habitats.

Laser Balancing

NASA Technical Reports Server (NTRS)

1981-01-01

Mechanical Technology, Incorporated developed a fully automatic laser machining process that allows more precise balancing removes metal faster, eliminates excess metal removal and other operator induced inaccuracies, and provides significant reduction in balancing time. Manufacturing costs are reduced as a result.

Health-promoting lifestyles of blue-collar, skilled trade, and white-collar workers.

PubMed

Lusk, S L; Kerr, M J; Ronis, D L

1995-01-01

The health-promoting lifestyles of blue-collar, skilled trade, and white-collar workers were examined. Specific purposes included determining differences in health-promoting behaviors, especially according to worker category, as well as ethnic identification, age, gender, education, and marital status. A convenience sample of 638 workers in a midwestern automotive components plant completed the Health-Promoting Lifestyle Profile (HPLP) and demographics questionnaire. In a multivariate analysis of variance (MANOVA) including all demographic variables, significant differences were found in the mean scores on subscales of the HPLP by job category (2 subscales), age (3), gender (2), and education (4). Prior to including education in the MANOVA, significant differences were found by job category on 5 subscales of the HPLP. The effects of education eliminated the majority of the effects of job category.

Beaded-chain collars: A new method to radiotag kangaroo rats for short-term studies

USGS Publications Warehouse

Harker, M.B.; Rathbun, G.B.; Langtimm, C.A.

1999-01-01

To study burrow use by small mammals, we needed to develop a simple, non-invasive radiotag for the endangered giant kangaroo rat (Dipodomys ingens). We designed and tested a radiocollar made of beaded-chain on 4 captive Heermann's kangaroo rats (D. heermanii). Attachment of the collar required no anesthesia, the collar was easily fitted in 1-2 minutes, and it caused minimal stress to the animals. Once the collar design and attachment technique were perfected on the surrogate animals, we fitted radiocollars on 48 giant kangaroo rats for about 15 days. Upon recapture, 12 animals showed some minor fur or skin abrasion on the neck. Overall, the attachment performed as expected and proved to be a reliable method to radiotrack kangaroo rats during our short-term field study.

HD-SAO-DM cross index

NASA Technical Reports Server (NTRS)

Nagy, T. A.; Mead, J.

1978-01-01

A table of correspondence SAO-HD-DM-GC was prepared by Morin (1973). The machine-readable version of this cross identification was obtained from the Centre de Donnees Stellaires (Strasbourg, France). The table was sorted at the Goddard Space Flight Center by HD number and all blank HD number records were removed to produce the HD-SAO-DM table presented. There were 258997 entries in the original table; there are 180411 entries after removing the blank HD records. The Boss General Catalogue (GC) numbers were retained on the machine-readable version after the sort.

Nanosecond multi-pulse laser milling for certain area removal of metal coating on plastics surface

NASA Astrophysics Data System (ADS)

Zhao, Kai; Jia, Zhenyuan; Ma, Jianwei; Liu, Wei; Wang, Ling

2014-12-01

Metal coating with functional pattern on engineering plastics surface plays an important role in industry applications; it can be obtained by adding or removing certain area of metal coating on engineering plastics surface. However, the manufacturing requirements are improved continuously and the plastic substrate presents three-dimensional (3D) structure-many of these parts cannot be fabricated by conventional processing methods, and a new manufacturing method is urgently needed. As the laser-processing technology has many advantages like high machining accuracy and constraints free substrate structure, the machining of the parts is studied through removing certain area of metal coating based on the nanosecond multi-pulse laser milling. To improve the edge quality of the functional pattern, generation mechanism and corresponding avoidance strategy of the processing defects are studied. Additionally, a prediction model for the laser ablation depth is proposed, which can effectively avoid the existence of residual metal coating and reduces the damage of substrate. With the optimal machining parameters, an equiangular spiral pattern on copper-clad polyimide (CCPI) is machined based on the laser milling at last. The experimental results indicate that the edge of the pattern is smooth and consistent, the substrate is flat and without damage. The achievements in this study could be applied in industrial production.

Multicutter machining of compound parametric surfaces

NASA Astrophysics Data System (ADS)

Hatna, Abdelmadjid; Grieve, R. J.; Broomhead, P.

2000-10-01

Parametric free forms are used in industries as disparate as footwear, toys, sporting goods, ceramics, digital content creation, and conceptual design. Optimizing tool path patterns and minimizing the total machining time is a primordial issue in numerically controlled (NC) machining of free form surfaces. We demonstrate in the present work that multi-cutter machining can achieve as much as 60% reduction in total machining time for compound sculptured surfaces. The given approach is based upon the pre-processing as opposed to the usual post-processing of surfaces for the detection and removal of interference followed by precise tracking of unmachined areas.

Installation Of Service Connections For Sensors Or Transmitters In Buried Water Pipes

DOEpatents

Burnham, Alan K.; Cooper, John F.

2006-02-21

A system for installing warning units in a buried pipeline. A small hole is drilled in the ground to the pipeline. A collar is affixed to one of the pipes of the pipeline. A valve with an internal passage is connected to the collar. A hole is drilled in the pipe. A warning unit is installed in the pipe by moving the warning unit through the internal passage, the collar, and the hole in the pipe.

Improved ion detector

DOEpatents

Tullis, A.M.

1986-01-30

An improved ion detector device of the ionization detection device chamber type comprises an ionization chamber having a central electrode therein surrounded by a cylindrical electrode member within the chamber with a collar frictionally fitted around at least one of the electrodes. The collar has electrical contact means carried in an annular groove in an inner bore of the collar to contact the outer surface of the electrode to provide electrical contact between an external terminal and the electrode without the need to solder leads to the electrode.

Work ability in midlife as a predictor of mortality and disability in later life: a 28-year prospective follow-up study

PubMed Central

von Bonsdorff, Mikaela B.; Seitsamo, Jorma; Ilmarinen, Juhani; Nygård, Clas-Håkan; von Bonsdorff, Monika E.; Rantanen, Taina

2011-01-01

Background Poor work ability correlates with increased morbidity and early retirement from the workforce, but the association in old age is not known. We investigated work ability in midlife among white-collar and blue-collar employees as a predictor of mortality and disability 28 years later. Methods A total of 5971 occupationally active people aged 44–58 years participated in the Finnish Longitudinal Study of Municipal Employees (FLAME) in 1981. Perceived work ability relative to lifetime best was categorized as excellent, moderate or poor. In 2009, the ability to perform activities of daily living was assessed among 2879 respondents (71.0% of the survivors). Mortality data were available up to July 2009. Results At the 28-year follow-up, 1918 of the 5971 participants had died and 1403 had some form of disability. Rates of death per 1000 person-years among white-collar men were 7.7 for those with excellent work ability, 14.7 for those with moderate work ability and 23.5 for those with poor work ability. Among blue-collar men, the corresponding rates were 15.5, 20.2 and 25.3. In women, rates ranged between 6.3 and 10.6 per 1000 person-years. The age-adjusted hazard ratios (HRs) for mortality were two to three times higher among blue-collar male employees with lower work ability than among white-collar male employees with excellent work ability in midlife (i.e., the reference group). The odds of death or disability at follow-up compared with white-collar workers with excellent work ability were highest among blue-collar employees with poor work ability in midlife (odds ratio [OR] 4.56, 95% confidence interval [CI] 2.82–7.37 for men; OR 3.37, 95% CI 2.28–4.98 for women). Among the survivors, similar but slightly lower risks of disability 28 years later were found. Interpretation Perceived poor work ability in midlife was associated with accelerated deterioration in health and functioning and remains evident after 28 years of follow-up. PMID:21282315

Prophylactic treatment of flea-infested dogs with an imidacloprid / flumethrin collar (Seresto®, Bayer) to preempt infection with Dipylidium caninum.

PubMed

Fourie, Josephus J; Crafford, Dionne; Horak, Ivan G; Stanneck, Dorothee

2013-08-01

The objective of the study was to determine the sustained effectiveness of 10 % imidacloprid and 4.5 % flumethrin, incorporated in a slow-release matrix collar, in preventing Dipylidium caninum infection in dogs after repeated laboratory infestations with fleas infected with metacestodes of this tapeworm. Efficacy against infection with D. caninum was evaluated by infesting 16 dogs with cat fleas (Ctenocephalides felis) on study days 7, 14, 21, 28, 35 and 42, from batches suitably infected with D. caninum metacestodes. Prior to each post-treatment infestation the D. caninum infection rate for the fleas was determined by microscopically examining 100 fleas for D. caninum metacestodes. The D. caninum prevalence in the fleas used for infestations ranged from 23 % to 52 %. Medicated collars were fitted to 8 of the dogs on study day 0. The weight of the IVP collars varied between 35.48 g and 38.48 g (average 37.16 g), whilst animal weight varied between 12.20 kg and 17.98 kg (treated group, n = 8, average 14.79 kg). Seven days later infestation of each of the 16 dogs with 250 fleas commenced. Infestations continued at weekly intervals until Day 42 with efficacy against fleas evaluated 24 hours after each infestation. From Days 21 to 74, infection of the dogs with D. caninum was verified (daily examination of faeces and cages for the presence of expelled proglottids). Calculation of prophylactic effectiveness of the collars in preventing infection with D. caninum was based on the difference in geometric mean numbers of scoleces between groups at necropsy on Day 75. Effective prevention of infection with D. caninum was found to be 96.6 %. Efficacy of the collars against fleas was ≥ 99.9 % for the duration of the assessment period. Newly acquired infestations of fleas are rapidly eliminated by the insecticidal components of the medicated collars over a period of several months. In the event of fleas being infected with metacestodes, with D. caninum can be prevented in collared dogs, concurrently reducing the likelihood of transmission to humans.

Prophylactic treatment of flea-infested cats with an imidacloprid/flumethrin collar to forestall infection with Dipylidium caninum

PubMed Central

2012-01-01

Background The objective of the study was to determine the sustained effectiveness of 10% imidacloprid (w/w) and 4.5% flumethrin (w/w) incorporated in a slow-release matrix collar in preventing Dipylidium caninum infection in cats following repeated laboratory-infestations with fleas infected with metacestodes. Methods Efficacy against infection with D. caninum was evaluated by infesting 16 cats with the flea Ctenocephalides felis felis infected with metacestodes of the tapeworm. Medicated collars were fitted to 8 of the cats and infestation of each cat with 200 fleas from a suitably infected batch commenced 7 days later and continued at weekly intervals until Day 28. Efficacy against fleas was evaluated 24 h after each infestation. Infection of the cats with D. caninum was verified by daily examination of the cats’ faeces and immediate surroundings for proglottids from Day 21 to Day 60. Calculation of the prophylactic effectiveness of the collars in preventing infection of the cats with D. caninum was based on the difference in the geometric mean number of scoleces recovered from the gastrointestinal tracts of collared compared to untreated cats at necropsy on Day 61. Results Efficacy of the collars against infestation of the cats with fleas was 99.9% on Day 7 and 100% at each subsequent weekly assessment. Infection of the fleas with metacestodes was ≥40% in 7 to 13 day old fleas, but progressively decreased thereafter. At necropsy all the control cats were infected with D. caninum and harboured between 19 and 346 scoleces with a geometric mean of 58.3. A single treated cat was infected and harboured 2 scoleces. Effective prevention of infection with D. caninum, based on a comparison of the geometric mean numbers of scoleces recovered from control and treated cats, was 99.7%. Conclusion The insecticidal components of the medicated collars are capable of rapidly eliminating newly-acquired infestations of fleas that are infected with the metacestodes of D. caninum, thus preventing infection with the cestode in collared cats. PMID:22839305

ENVIRONMENTALLY CONSCIOUS ELECTROCHEMICAL MACHINING FOR ZERO DISCHARGE AND METAL RECYCLING - PHASE I

EPA Science Inventory

Optimization of process parameters in drilling of fibre hybrid composite using Taguchi and grey relational analysis

NASA Astrophysics Data System (ADS)

Vijaya Ramnath, B.; Sharavanan, S.; Jeykrishnan, J.

2017-03-01

Nowadays quality plays a vital role in all the products. Hence, the development in manufacturing process focuses on the fabrication of composite with high dimensional accuracy and also incurring low manufacturing cost. In this work, an investigation on machining parameters has been performed on jute-flax hybrid composite. Here, the two important responses characteristics like surface roughness and material removal rate are optimized by employing 3 machining input parameters. The input variables considered are drill bit diameter, spindle speed and feed rate. Machining is done on CNC vertical drilling machine at different levels of drilling parameters. Taguchi’s L16 orthogonal array is used for optimizing individual tool parameters. Analysis Of Variance is used to find the significance of individual parameters. The simultaneous optimization of the process parameters is done by grey relational analysis. The results of this investigation shows that, spindle speed and drill bit diameter have most effect on material removal rate and surface roughness followed by feed rate.

Accurate Micro-Tool Manufacturing by Iterative Pulsed-Laser Ablation

NASA Astrophysics Data System (ADS)

Warhanek, Maximilian; Mayr, Josef; Dörig, Christian; Wegener, Konrad

2017-12-01

Iterative processing solutions, including multiple cycles of material removal and measurement, are capable of achieving higher geometric accuracy by compensating for most deviations manifesting directly on the workpiece. Remaining error sources are the measurement uncertainty and the repeatability of the material-removal process including clamping errors. Due to the lack of processing forces, process fluids and wear, pulsed-laser ablation has proven high repeatability and can be realized directly on a measuring machine. This work takes advantage of this possibility by implementing an iterative, laser-based correction process for profile deviations registered directly on an optical measurement machine. This way efficient iterative processing is enabled, which is precise, applicable for all tool materials including diamond and eliminates clamping errors. The concept is proven by a prototypical implementation on an industrial tool measurement machine and a nanosecond fibre laser. A number of measurements are performed on both the machine and the processed workpieces. Results show production deviations within 2 μm diameter tolerance.

ODC-Free Solvent Implementation for Phenolics Cleaning

NASA Technical Reports Server (NTRS)

Wurth, Laura; Biegert, Lydia; Lamont, DT; McCool, Alex (Technical Monitor)

2001-01-01

During phenolic liner manufacture, resin-impregnated (pre-preg) bias tape of silica, glass, or carbon cloth is tape-wrapped, cured, machined, and then wiped with 1,1,1 tri-chloroethane (TCA) to remove contaminants that may have been introduced during machining and handling. Following the TCA wipe, the machined surface is given a resin wet-coat and over-wrapped with more prepreg and cured. A TCA replacement solvent for these wiping operations must effectively remove both surface contaminants, and sub-surface oils and greases while not compromising the integrity of this interface. Selection of a TCA replacement solvent for phenolic over-wrap interface cleaning began with sub-scale compatibility tests with cured phenolics. Additional compatibility tests included assessment of solvent retention in machined phenolic surfaces. Results from these tests showed that, while the candidate solvent did not degrade the cured phenolics, it was retained in higher concentrations than TCA in phenolic surfaces. This effect was most pronounced with glass and silica cloth phenolics with steep ply angles relative to the wiped surfaces.

Use of video-assisted intubation devices in the management of patients with trauma.

PubMed

Aziz, Michael

2013-03-01

Patients with trauma may have airways that are difficult to manage. Patients with blunt trauma are at increased risk of unrecognized cervical spine injury, especially patients with head trauma. Manual in-line stabilization reduces cervical motion and should be applied whenever a cervical collar is removed. All airway interventions cause some degree of cervical spine motion. Flexible fiberoptic intubation causes the least cervical motion of all intubation approaches, and rigid video laryngoscopy provides a good laryngeal view and eases intubation difficulty. In emergency medicine departments, video laryngoscopy use is growing and observational data suggest an improved success rate compared with direct laryngoscopy. Copyright © 2013 Elsevier Inc. All rights reserved.

KSC-97PC1090

NASA Image and Video Library

1997-07-19

Workers in the Payload Hazardous Servicing Facility remove the storage collar from a radioisotope thermoelectric generator (RTG) in preparation for installation on the Cassini spacecraft. Cassini will be outfitted with three RTGs. The power units are undergoing mechanical and electrical verification tests in the PHSF. The RTGs will provide electrical power to Cassini on its 6.7-year trip to the Saturnian system and during its four-year mission at Saturn. RTGs use heat from the natural decay of plutonium to generate electric power. The generators enable spacecraft to operate at great distances from the Sun where solar power systems are not feasible. The Cassini mission is targeted for an Oct. 6 launch aboard a Titan IVB/Centaur expendable launch vehicle

Switching Circuit for Shop Vacuum System

NASA Technical Reports Server (NTRS)

Burley, R. K.

1987-01-01

No internal connections to machine tools required. Switching circuit controls vacuum system draws debris from grinders and sanders in machine shop. Circuit automatically turns on vacuum system whenever at least one sander or grinder operating. Debris safely removed, even when operator neglects to turn on vacuum system manually. Pickup coils sense alternating magnetic fields just outside operating machines. Signal from any coil or combination of coils causes vacuum system to be turned on.

NGSI technologies Coming Down the Road - Fast Neutron Collar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swinhoe, Martyn T.

2014-02-26

This report describes the safeguard significance of NGS technologies, those things that offer new neutron collar design with 3He detectors to give good precision results in much shorter measurement time.

Mounting system for optical frequency reference cavities

NASA Technical Reports Server (NTRS)

Notcutt, Mark (Inventor); Hall, John L. (Inventor); Ma, Long-Sheng (Inventor)

2008-01-01

A technique for reducing the vibration sensitivity of laser-stabilizing optical reference cavities is based upon an improved design and mounting method for the cavity, wherein the cavity is mounted vertically. It is suspended at one plane, around the spacer cylinder, equidistant from the mirror ends of the cavity. The suspension element is a collar of an extremely low thermal expansion coefficient material, which surrounds the spacer cylinder and contacts it uniformly. Once the collar has been properly located, it is cemented in place so that the spacer cylinder is uniformly supported and does not have to be squeezed at all. The collar also includes a number of cavities partially bored into its lower flat surface, around the axial bore. These cavities are support points, into which mounting base pins will be inserted. Hence the collar is supported at a minimum of three points.

Resolution of a periodontoid rheumatoid pannus mass in an elderly patient treated with a rigid cervical collar: A case report and literature review.

PubMed

Oseni, Abidemi; Kakavas, Georg; Scholz, Martin; Petridis, Athanasios

2016-06-17

In patients with C2 rheumatoid pannus with spinal cord compression the treatment of choice is extensive surgery either through a transoral resection of the dens axis or a dorsal stabilisation, or both. We present a case of an 11-mm rheumatoid pannus with significant compression of the spinal cord, which failed surgical treatment with respect to dorsal stabilisation. Therefore, rigid cervical collar for 8 weeks followed by soft collar for another 4 weeks was chosen as a treatment option. During the follow-up period of 1 year, the pannus reduced significantly and the spinal cord decompressed. In cases where surgery is not an option or is technically very demanding, the alternative of cervical collar immobilisation is a satisfying option.

Work conditions and socioeconomic inequalities in work ability.

PubMed

Aittomäki, Akseli; Lahelma, Eero; Roos, Eva

2003-04-01

The objective of this study was to investigate socioeconomic inequalities in work ability among municipal employees and the contribution of work conditions to these inequalities. The subjects were employees of the City of Helsinki and were all over 40 years of age. Data (N=1,827) were collected in the age-group-based medical check-ups by occupational health personnel. Work ability was measured with a work ability index. The association between the work ability index with socioeconomic status was examined by fitting logistic regression models. There was a consistent gradient in work ability, lower socioeconomic groups having poorer work ability. Adjusting for physical stress accounted for a substantial part of the socioeconomic inequalities. Adjusting for possibilities for influence and development at work accounted for some of the difference between white-collar and blue-collar employees, but not for differences between the white-collar subgroups among the women. Mental stress and problems in the social environment were not clearly associated with the inequalities. Socioeconomic inequalities in work ability among municipal employees correspond to the inequalities in ill health found in general populations. Physical stress at work explained a large part of the inequality. Poor possibilities to influence one's work contributed to the excess of lowered work ability among the blue-collar employees, but not to the inequalities between white-collar subgroups of women. Apart from physical workload, work conditions did not explain socioeconomic inequalities between white-collar subgroups of women.

Trends in smoking rates among urban civil servants in Japan according to occupational categories.

PubMed

Higashibata, Takahiro; Nakagawa, Hiroko; Okada, Rieko; Wakai, Kenji; Hamajima, Nobuyuki

2015-08-01

Occupation could affect the distribution of smoking status of workers, and the success of smoking cessation among workers depends partly on worksite conditions. Blue collar workers have been identified as a high-risk group for smoking. The aim of the present study was to examine trends in smoking rates among urban civil servants in Japan according to occupational categories. Subjects were urban civil servants aged 30-59 years. They annually reported smoking status in a questionnaire in a worksite health check-up each year from 2004 to 2011. Urban civil servants reported substantially lower current smoking rates than national smoking rates in Japan (20.2%, 23.8%, and 27.0% for males in their 30s, 40s, and 50s and 2.4%, 6.3%, and 9.5% for females, respectively, in 2011). In analysis by occupational categories, current smoking rates declined among all groups except female white collar workers in their 50s. The current and persistent smoking rates (number of current smokers/[number of ex-smokers and current smokers]) among blue collar workers were higher than those among white collar workers at almost all time points in all age and gender groups. This study found relatively lower current smoking rates among urban civil servants than the national average and higher current and persistent smoking rates in blue collar workers than in white collar workers among them. These results would help to make suitable worksite smoking cessation policies for each occupational category.

Peri-implant bone formation and surface characteristics of rough surface zirconia implants manufactured by powder injection molding technique in rabbit tibiae.

PubMed

Park, Young-Seok; Chung, Shin-Hye; Shon, Won-Jun

2013-05-01

To evaluate osseointegration in rabbit tibiae and to investigate surface characteristics of novel zirconia implants made by powder injection molding (PIM) technique, using molds with and without roughened inner surfaces. A total of 20 rabbits received three types of external hex implants with identical geometry on the tibiae: machined titanium implants, PIM zirconia implants without mold etching, and PIM zirconia implants with mold etching. Surface characteristics of the three types of implant were evaluated. Removal torque tests and histomorphometric analyses were performed. The roughness of PIM zirconia implants was higher than that of machined titanium implants. The PIM zirconia implants exhibited significantly higher bone-implant contact and removal torque values than the machined titanium implants (P < 0.001). The PIM zirconia implants using roughened mold showed significantly higher removal torque values than PIM zirconia implants without using roughened mold (P < 0.001). It is concluded that the osseointegration of PIM zirconia implant is promising and PIM using roughened mold etching technique can produce substantially rough surfaces on zirconia implants. © 2012 John Wiley & Sons A/S.

Flotation machine and process for removing impurities from coals

DOEpatents

Szymocha, K.; Ignasiak, B.; Pawlak, W.; Kulik, C.; Lebowitz, H.E.

1995-12-05

The present invention is directed to a type of flotation machine that combines three separate operations in a single unit. The flotation machine is a hydraulic separator that is capable of reducing the pyrite and other mineral matter content of a coal. When the hydraulic separator is used with a flotation system, the pyrite and certain other mineral particles that may have been entrained by hydrodynamic forces associated with conventional flotation machines and/or by the attachment forces associated with the formation of microagglomerates are washed and separated from the coal. 4 figs.

Flotation machine and process for removing impurities from coals

DOEpatents

Szymocha, Kazimierz; Ignasiak, Boleslaw; Pawlak, Wanda; Kulik, Conrad; Lebowitz, Howard E.

1995-01-01

The present invention is directed to a type of flotation machine that combines three separate operations in a single unit. The flotation machine is a hydraulic separator that is capable of reducing the pyrite and other mineral matter content of a coal. When the hydraulic separator is used with a flotation system, the pyrite and certain other minerals particles that may have been entrained by hydrodynamic forces associated with conventional flotation machines and/or by the attachment forces associated with the formation of microagglomerates are washed and separated from the coal.

Flotation machine and process for removing impurities from coals

DOEpatents

Szymocha, K.; Ignasiak, B.; Pawlak, W.; Kulik, C.; Lebowitz, H.E.

1997-02-11

The present invention is directed to a type of flotation machine that combines three separate operations in a single unit. The flotation machine is a hydraulic separator that is capable of reducing the pyrite and other mineral matter content of a coal. When the hydraulic separator is used with a flotation system, the pyrite and certain other minerals particles that may have been entrained by hydrodynamic forces associated with conventional flotation machines and/or by the attachment forces associated with the formation of microagglomerates are washed and separated from the coal. 4 figs.

Flotation machine and process for removing impurities from coals

DOEpatents

Szymocha, Kazimierz; Ignasiak, Boleslaw; Pawlak, Wanda; Kulik, Conrad; Lebowitz, Howard E.

1997-01-01

The present invention is directed to a type of flotation machine that combines three separate operations in a single unit. The flotation machine is a hydraulic separator that is capable of reducing the pyrite and other mineral matter content of a coal. When the hydraulic separator is used with a flotation system, the pyrite and certain other minerals particles that may have been entrained by hydrodynamic forces associated with conventional flotation machines and/or by the attachment forces associated with the formation of microagglomerates are washed and separated from the coal.

Tracking data from nine free-roaming Cheetahs (Acinonyx jubatus) collared in the Thabazimbi area, Limpopo Province, South Africa.

PubMed

Marnewick, Kelly; Page-Nicholson, Samantha; Roxburgh, Lizanne; Somers, Michael J

2017-01-01

In partnership with the University of Pretoria, the Endangered Wildlife Trust's Carnivore Conservation Programme collared six male and three female free-roaming Cheetahs ( Acinonyx jubatus ) in the Thabazimbi area in Limpopo Province, South Africa. This study was undertaken to determine the spatial ecology of free-roaming Cheetahs that occur outside of formal protected areas on private ranchland, where they frequently come into conflict with, and are sometimes killed by, private landowners. The data were collected between September 2003 and November 2008, resulting in a total of 3165 location points (65 points from VHF collars and 3100 from GPS collars) for nine individual Cheetahs. This dataset provides distribution information about this Vulnerable species occurring outside of protected areas within South Africa. The dataset has been published to the Global Biodiversity Information Facility (www.GBIF.org) and provides the largest dataset on Cheetahs thus far, and, although it is spatially limited to a relatively small region on the African continent, it is the first study of its kind within South Africa. Also of significance is that the fate of 6 of the 9 collared Cheetahs is known, all except one of which died of anthropogenic causes.

Mind over matter: exploring job stress among female blue-collar workers.

PubMed

Griffin-Blake, C Shannon; Tucker, Pattie J; Liburd, Leandris

2006-12-01

Although overall health has been defined holistically as the integration of a person's optimal mental, physical, social, intellectual, and spiritual well-being, a mental health focus remains on the fringe of many public health efforts. This report describes recent efforts by the Centers for Disease Control and Prevention (CDC) to explore job stress among female blue-collar workers. Using a more holistic approach to understand its impact on blue-collar women's overall health, health-related quality of life (HRQOL) was used to assess optimal human performance. Attempting to encapsulate how overall health affects one's ability to participate and fulfill daily personal/professional tasks, HRQOL yields a broader understanding of the interaction between psychological well-being (mind) and physical functioning (matter). Embedding CDC HRQOL-4 measures into a questionnaire used as part of a larger mixed methods project, blue-collar women responded to questions about their health, including both mental and physical. For these female workers, mental health appeared to be of greater consequence, which could be interpreted as mind being more significant than matter. This paper highlights the findings related to HRQOL issues experienced by these female blue-collar workers and summarizes recommendations for effective individual and organizational approaches to address job stress.

Experimental Study of a Nozzle Using Fluidic Counterflow for Thrust Vectoring

NASA Technical Reports Server (NTRS)

Flamm, Jeffrey D.

1998-01-01

A static experimental investigation of a counterflow thrust vectoring nozzle concept was performed. The study was conducted in the NASA Langley Research Center Jet Exit Test Facility. Internal performance characteristics were defined over a nozzle pressure ratio (jet total to ambient) range of 3.5 to 10.0. The effects of suction collar geometry and suction slot height on nozzle performance were examined. In the counterflow concept, thrust vectoring is achieved by applying a vacuum to a slot adjacent to a primary jet that is shrouded by a suction collar. Two flow phenomena work to vector the primary jet depending upon the test conditions and configuration. In one case, the vacuum source creates a secondary reverse flowing stream near the primary jet. The shear layers between the two counterflowing streams mix and entrain mass from the surrounding fluid. The presence of the collar inhibits mass entrainment and the flow near the collar accelerates, causing a drop in pressure on the collar. The second case works similarly except that the vacuum is not powerful enough to create a counterflowing stream and instead a coflowing stream is present. The primary jet is vectored if suction is applied asymmetrically on the top or bottom of the jet.

Cancer by industry: analysis of a population-based cancer registry with an emphasis on blue-collar workers.

PubMed

Hall, N E; Rosenman, K D

1991-01-01

This paper uses information on occupation and industry routinely collected in a state-based cancer registry to assess potential associations between work place exposures and cancer incidence. Industry-specific proportional cancer incidence ratios (PCIR) were calculated by race and sex for all individuals and for white males with blue-collar occupations. Expected numbers of cancers were derived both from cancers occurring among all occupations and just among blue-collar occupations. This latter analysis was done as a control for differences in the prevalence of life-style habits between blue- and white-collar workers. Increased lung cancer PCIR were seen in most industries previously reported to be associated with lung cancer risk. The effects of socioeconomic status on these results are discussed. Other results include an increased ratio of melanoma in blue-collar white male rubber and plastic product workers, an increased ratio of non-Hodgkin's lymphomas in motor vehicle manufacture workers, and an increased PCIR of chronic lymphocytic leukemia in general construction workers. Uterine cancer was increased in proportion in white females for a number of industries including rubber and plastic product manufacture, apparel manufacture, and electrical equipment manufacture.

Prosthetic urinary sphincter

NASA Technical Reports Server (NTRS)

Helms, C. R.; Smyly, H. M. (Inventor)

1981-01-01

A pump/valve unit for controlling the inflation and deflation of a urethral collar in a prosthetic urinary sphincter device is described. A compressible bulb pump defining a reservoir was integrated with a valve unit for implantation. The valve unit includes a movable valve member operable by depression of a flexible portion of the valve unit housing for controlling fluid flow between the reservoir and collar; and a pressure sensing means which operates the valve member to relieve an excess pressure in the collar should too much pressure be applied by the patient.

Collar grids for intersecting geometric components within the Chimera overlapped grid scheme

NASA Technical Reports Server (NTRS)

Parks, Steven J.; Buning, Pieter G.; Chan, William M.; Steger, Joseph L.

1991-01-01

A method for overcoming problems with using the Chimera overset grid scheme in the region of intersecting geometry components is presented. A 'collar grid' resolves the intersection region and provides communication between the component grids. This approach is validated by comparing computed and experimental data for a flow about a wing/body configuration. Application of the collar grid scheme to the Orbiter fuselage and vertical tail intersection in a computation of the full Space Shuttle launch vehicle demonstrates its usefulness for simulation of flow about complex aerospace vehicles.

White-collar crime: corporate and securities and commodities fraud.

PubMed

Price, Marilyn; Norris, Donna M

2009-01-01

In this era of increased interest in white-collar crime, forensic psychiatrists are in a key position to study the individual characteristics of offenders. While a comprehensive theory of high-level white-collar crime should consider societal and organizational contributions, there is value in understanding the personal traits that place an individual at high risk for offending. As the impact of the criminal acts of this group has been increasingly felt by larger groups from all socioeconomic strata, there is less willingness by the public to view these crimes as victimless and harmless.

Processing of Novel Nanoparticle Dispersion Strengthened Ceramics for Improved Mechanical Performance

DTIC Science & Technology

1992-12-14

the composite . The top and bottom surfaces of each disc were removed to eliminate any reaction layer, and the discs were machined ’ to produce bars...l.It is postulated that during grinding of the composite , compressive stresses and machining flaws are introduced into the surface. The compressive...two materials considered would react differently to the annealing step. It can be expected that machining flaws will heal in the composite samples

Different parts, different stories: climate sensitivity of growth is stronger in root collars vs. stems in tundra shrubs.

PubMed

Ropars, Pascale; Angers-Blondin, Sandra; Gagnon, Marianne; Myers-Smith, Isla H; Lévesque, Esther; Boudreau, Stéphane

2017-08-01

Shrub densification has been widely reported across the circumpolar arctic and subarctic biomes in recent years. Long-term analyses based on dendrochronological techniques applied to shrubs have linked this phenomenon to climate change. However, the multi-stemmed structure of shrubs makes them difficult to sample and therefore leads to non-uniform sampling protocols among shrub ecologists, who will favor either root collars or stems to conduct dendrochronological analyses. Through a comparative study of the use of root collars and stems of Betula glandulosa, a common North American shrub species, we evaluated the relative sensitivity of each plant part to climate variables and assessed whether this sensitivity is consistent across three different types of environments in northwestern Québec, Canada (terrace, hilltop and snowbed). We found that root collars had greater sensitivity to climate than stems and that these differences were maintained across the three types of environments. Growth at the root collar was best explained by spring precipitation and summer temperature, whereas stem growth showed weak and inconsistent responses to climate variables. Moreover, sensitivity to climate was not consistent among plant parts, as individuals having climate-sensitive root collars did not tend to have climate-sensitive stems. These differences in sensitivity of shrub parts to climate highlight the complexity of resource allocation in multi-stemmed plants. Whereas stem initiation and growth are driven by microenvironmental variables such as light availability and competition, root collars integrate the growth of all plant parts instead, rendering them less affected by mechanisms such as competition and more responsive to signals of global change. Although further investigations are required to determine the degree to which these findings are generalizable across the tundra biome, our results indicate that consistency and caution in the choice of plant parts are a key consideration for the success of future dendroclimatological studies on shrubs. © 2017 John Wiley & Sons Ltd.

Job strain among blue-collar and white-collar employees as a determinant of total mortality: a 28-year population-based follow-up

PubMed Central

Seitsamo, Jorma; von Bonsdorff, Monika E; Ilmarinen, Juhani; Nygård, Clas-Håkan; Rantanen, Taina

2012-01-01

Objectives To investigate the effect of job demand, job control and job strain on total mortality among white-collar and blue-collar employees working in the public sector. Design 28-year prospective population-based follow-up. Setting Several municipals in Finland. Participants 5731 public sector employees from the Finnish Longitudinal Study on Municipal Employees Study aged 44–58 years at baseline. Outcomes Total mortality from 1981 to 2009 among individuals with complete data on job strain in midlife, categorised according to job demand and job control: high job strain (high job demands and low job control), active job (high job demand and high job control), passive job (low job demand and low job control) and low job strain (low job demand and high job control). Results 1836 persons died during the follow-up. Low job control among men increased (age-adjusted HR 1.26, 95% CI 1.12 to 1.42) and high job demand among women decreased the risk for total mortality HR 0.82 (95% CI 0.71 to 0.95). Adjustment for occupational group, lifestyle and health factors attenuated the association for men. In the analyses stratified by occupational group, high job strain increased the risk of mortality among white-collar men (HR 1.52, 95% CI 1.09 to 2.13) and passive job among blue-collar men (HR 1.28, 95% CI 1.05 to 1.47) compared with men with low job strain. Adjustment for lifestyle and health factors attenuated the risks. Among white-collar women having an active job decreased the risk for mortality (HR 0.78, 95% CI 0.60 to 1.00). Conclusion The impact of job strain on mortality was different according to gender and occupational group among middle-aged public sector employees. PMID:22422919

The Welfare Consequences and Efficacy of Training Pet Dogs with Remote Electronic Training Collars in Comparison to Reward Based Training

PubMed Central

Cooper, Jonathan J.; Cracknell, Nina; Hardiman, Jessica; Wright, Hannah; Mills, Daniel

2014-01-01

This study investigated the welfare consequences of training dogs in the field with manually operated electronic devices (e-collars). Following a preliminary study on 9 dogs, 63 pet dogs referred for recall related problems were assigned to one of three Groups: Treatment Group A were trained by industry approved trainers using e-collars; Control Group B trained by the same trainers but without use of e-collars; and Group C trained by members of the Association of Pet Dog Trainers, UK again without e-collar stimulation (n = 21 for each Group). Dogs received two 15 minute training sessions per day for 4–5 days. Training sessions were recorded on video for behavioural analysis. Saliva and urine were collected to assay for cortisol over the training period. During preliminary studies there were negative changes in dogs' behaviour on application of electric stimuli, and elevated cortisol post-stimulation. These dogs had generally experienced high intensity stimuli without pre-warning cues during training. In contrast, in the subsequent larger, controlled study, trainers used lower settings with a pre-warning function and behavioural responses were less marked. Nevertheless, Group A dogs spent significantly more time tense, yawned more often and engaged in less environmental interaction than Group C dogs. There was no difference in urinary corticosteroids between Groups. Salivary cortisol in Group A dogs was not significantly different from that in Group B or Group C, though Group C dogs showed higher measures than Group B throughout sampling. Following training 92% of owners reported improvements in their dog's referred behaviour, and there was no significant difference in reported efficacy across Groups. Owners of dogs trained using e-collars were less confident of applying the training approach demonstrated. These findings suggest that there is no consistent benefit to be gained from e-collar training but greater welfare concerns compared with positive reward based training. PMID:25184218

Reagent precipitation of copper ions from wastewater of machine-building factories

NASA Astrophysics Data System (ADS)

Porozhnyuk, L. A.; Lupandina, N. S.; Porozhnyuk, E. V.

2018-03-01

The article presents the results of reagent removal of copper ions from wastewater of machine-building factories. The urgency of the study is conditioned by the widening of the range of effective reagents through the implementation of industrial waste. The investigation covers mineralogical and fractional composition of chalk enrichment waste. In the work, the conditions of thermal activation of chalk enrichment waste used for reagent removal of copper ions from wastewater were elaborated. It was shown that the thermal activation of waste facilitates the increased treatment efficacy up to the set sanitation, hygiene and technological standards.

Transportation of Tunnel Muck by Pipeline

DOT National Transportation Integrated Search

1978-01-01

The view reflected herein is that if the advancement of the technology of muck removal does not keep pace with advances in tunneling machine technology, muck removal can become the limiting constraint on the forward movement of the tunnel face, and h...

DETAIL OF SPARE CONICAL CRUSHER AND GRINDING BURR WHEELS REMOVED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL OF SPARE CONICAL CRUSHER AND GRINDING BURR WHEELS REMOVED FROM THE MILLING MACHINE. - F. & H. Benning Company Oyster Mill, 14430 Solomons Island Road (moved from 1014 Benning Road, Galesville, Anne Arundel County, Maryland), Solomons, Calvert County, MD

Green Collar Workers: An Emerging Workforce in the Environmental Sector

PubMed Central

McClure, Laura A.; LeBlanc, William G.; Fernandez, Cristina A.; Fleming, Lora E.; Lee, David J.; Moore, Kevin J.; Caban-Martinez, Alberto J.

2017-01-01

Objective We describe the socio-demographic, occupational, and health characteristics of “green collar” workers, a vital and emerging workforce in energy-efficiency and sustainability. Methods We linked data from the 2004–2012 National Health Interview Surveys (NHIS) and US Occupational Information Network (O*NET). Descriptive and logistic regression analyses were conducted using green collar worker status as the outcome (n=143,346). Results Green collar workers are more likely than non-green workers to be male, age 25–64y, obese, and with ≤ high school education. They are less likely to be racial/ethnic minorities and employed in small companies or government jobs. Conclusions Green collar workers have a distinct socio-demographic and occupational profile, and this workforce deserves active surveillance to protect its workers’ safety. The NHIS-O*NET linkage represents a valuable resource to further identify the unique exposures and characteristics of this occupational sector. PMID:28403016

White-collar workers' self-reported physical symptoms associated with using computers.

PubMed

Korpinen, Leena; Pääkkönen, Rauno; Gobba, Fabriziomaria

2012-01-01

The aim of our work was to study the physical symptoms of upper- and lower-level white-collar workers using a questionnaire. The study was cross-sectional with a questionnaire posted to 15 000 working-age persons. The responses (6121) included 970 upper- and 1150 lower-level white-collar workers. In the upper- and lower-level white-collar worker groups, 45.7 and 56.0%, respectively, had experienced pain, numbness and aches in the neck either pretty often or more frequently. When comparing daily computer users and nonusers, there were significant differences in pain, numbness and aches in the neck or in the shoulders. In addition, age and gender influenced some physical symptoms. In the future, it is essential to take into account that working with computers can be especially associated with physical symptoms in the neck and in the shoulders when workers use computers daily.

Excitatory glutamate is essential for development and maintenance of the piloneural mechanoreceptor.

PubMed

Woo, Seung-Hyun; Baba, Yoshichika; Franco, Alexa M; Lumpkin, Ellen A; Owens, David M

2012-02-01

The piloneural collar in mammalian hairy skin comprises an intricate pattern of circumferential and longitudinal sensory afferents that innervate primary and secondary pelage hairs. The longitudinal afferents tightly associate with terminal Schwann cell processes to form encapsulated lanceolate nerve endings of rapidly adapting mechanoreceptors. The molecular basis for piloneural development, maintenance and function is poorly understood. Here, we show that Nefh-expressing glutamatergic neurons represent a major population of longitudinal and circumferential sensory afferents innervating the piloneural collar. Our findings using a VGLUT2 conditional-null mouse model indicate that glutamate is essential for innervation, patterning and differentiation of NMDAR(+) terminal Schwann cells during piloneural collar development. Similarly, treatment of adult mice with a selective NMDAR antagonist severely perturbed piloneural collar structure and reduced excitability of these mechanosensory neurons. Collectively, these results show that DRG-derived glutamate is essential for the proper development, maintenance and sensory function of the piloneural mechanoreceptor.

The effect of bone growth onto massive prostheses collars in protecting the implant from fracture.

PubMed

Fromme, Paul; Blunn, Gordon W; Aston, William J; Abdoola, Tasneem; Koris, Jacob; Coathup, Melanie J

2017-03-01

Limb-sparing distal femoral endoprotheses used in cancer patients have a high risk of aseptic loosening. It had been reported that young adolescent patients have a higher rate of loosening and fatigue fracture of intramedullary stems because the implant becomes undersized as patients grow. Extracortical bone growth into the grooved hydroxyapatite-coated collar had been shown to reduce failure rates. The stresses in the implant and femur have been calculated from Finite Element models for different stages of bone growth onto the collar. For a small diameter stem without any bone growth, a large stress concentration at the implant shoulder was found, leading to a significant fracture risk under normal walking loads. Bone growth and osseointergration onto the implant collar reduced the stress level in the implant to safe levels. For small bone bridges a risk of bone fracture was observed. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

Comparative Analysis of Cervical Spine Management in a Subset of Severe Traumatic Brain Injury Cases Using Computer Simulation

PubMed Central

Carter, Kimbroe J.; Dunham, C. Michael; Castro, Frank; Erickson, Barbara

2011-01-01

Background No randomized control trial to date has studied the use of cervical spine management strategies in cases of severe traumatic brain injury (TBI) at risk for cervical spine instability solely due to damaged ligaments. A computer algorithm is used to decide between four cervical spine management strategies. A model assumption is that the emergency room evaluation shows no spinal deficit and a computerized tomogram of the cervical spine excludes the possibility of fracture of cervical vertebrae. The study's goal is to determine cervical spine management strategies that maximize brain injury functional survival while minimizing quadriplegia. Methods/Findings The severity of TBI is categorized as unstable, high risk and stable based on intracranial hypertension, hypoxemia, hypotension, early ventilator associated pneumonia, admission Glasgow Coma Scale (GCS) and age. Complications resulting from cervical spine management are simulated using three decision trees. Each case starts with an amount of primary and secondary brain injury and ends as a functional survivor, severely brain injured, quadriplegic or dead. Cervical spine instability is studied with one-way and two-way sensitivity analyses providing rankings of cervical spine management strategies for probabilities of management complications based on QALYs. Early collar removal received more QALYs than the alternative strategies in most arrangements of these comparisons. A limitation of the model is the absence of testing against an independent data set. Conclusions When clinical logic and components of cervical spine management are systematically altered, changes that improve health outcomes are identified. In the absence of controlled clinical studies, the results of this comparative computer assessment show that early collar removal is preferred over a wide range of realistic inputs for this subset of traumatic brain injury. Future research is needed on identifying factors in projecting awakening from coma and the role of delirium in these cases. PMID:21544239

Efficacy and effects of various anti-crib devices on behaviour and physiology of crib-biting horses.

PubMed

Albright, J D; Witte, T H; Rohrbach, B W; Reed, A; Houpt, K A

2016-11-01

Crib-biting is a common oral stereotypy. Although most treatments involve prevention, the efficacy of various anti-crib devices, including surgically implanted gingival rings, has thus far not been empirically tested. Demonstrate the effect that 2 anti-crib collars, muzzle and gingival rings have on crib-biting, other maintenance behaviours, and cortisol levels in established crib-biting horses. Randomised, crossover clinical trial. In Experiment I, 2 anti-crib collars and a muzzle were used on 8 established crib-biting horses; horses wore each of 3 devices for 7 days, with a 7-day device-free period between treatments. Horses were video recorded for 24 h at least 3 times each week prior to any device placement, and always the day after a device was removed. In Experiment II, gingival rings were used in 6 established crib-biting horses; horses were video recorded for 3 days prior to ring implantation and the day after surgery until the rings became ineffective. Plasma cortisol levels were assessed every day during Experiment II and on Days 1, 3 and 5 of each week during Experiment I. All devices significantly reduced crib-biting compared with control periods. There was no significant difference in crib-bite reduction amongst devices in Experiment I, or between pre-device periods and the first day the device was removed. The only increase in plasma cortisol occurred on the day of surgery in Experiment II. Common anti-crib devices are effective in reducing crib-biting and significant distress was not evident from our findings. We did not find a post inhibitory rebound effect. Surgical rings were successful only temporarily and implantation was probably painful to the horses. Because stereotypies involve suboptimal environmental conditions, efforts should be made to improve husbandry factors previously shown to contribute to crib-biting, and research into decreasing horses' motivation to crib-bite should continue. © 2015 EVJ Ltd.

High efficiency machining technology and equipment for edge chamfer of KDP crystals

NASA Astrophysics Data System (ADS)

Chen, Dongsheng; Wang, Baorui; Chen, Jihong

2016-10-01

Potassium dihydrogen phosphate (KDP) is a type of nonlinear optical crystal material. To Inhibit the transverse stimulated Raman scattering of laser beam and then enhance the optical performance of the optics, the edges of the large-sized KDP crystal needs to be removed to form chamfered faces with high surface quality (RMS<5 nm). However, as the depth of cut (DOC) of fly cutting is usually several, its machining efficiency is too low to be accepted for chamfering of the KDP crystal as the amount of materials to be removed is in the order of millimeter. This paper proposes a novel hybrid machining method, which combines precision grinding with fly cutting, for crackless and high efficiency chamfer of KDP crystal. A specialized machine tool, which adopts aerostatic bearing linear slide and aerostatic bearing spindle, was developed for chamfer of the KDP crystal. The aerostatic bearing linear slide consists of an aerostatic bearing guide with linearity of 0.1 μm/100mm and a linear motor to achieve linear feeding with high precision and high dynamic performance. The vertical spindle consists of an aerostatic bearing spindle with the rotation accuracy (axial) of 0.05 microns and Fork type flexible connection precision driving mechanism. The machining experiment on flying and grinding was carried out, the optimize machining parameters was gained by a series of experiment. Surface roughness of 2.4 nm has been obtained. The machining efficiency can be improved by six times using the combined method to produce the same machined surface quality.

Investigation of Machine-ability of Inconel 800 in EDM with Coated Electrode

NASA Astrophysics Data System (ADS)

Karunakaran, K.; Chandrasekaran, M.

2017-03-01

The Inconel 800 is a high temperature application alloy which is classified as a nickel based super alloy. It has wide scope in aerospace engineering, gas Turbine etc. The machine-ability studies were found limited on this material. Hence This research focuses on machine-ability studies on EDM of Inconel 800 with Silver Coated Electrolyte Copper Electrode. The purpose of coating on electrode is to reduce tool wear. The factors pulse on Time, Pulse off Time and Peck Current were considered to observe the responses of surface roughness, material removal rate, tool wear rate. Taguchi Full Factorial Design is employed for Design the experiment. Some specific findings were reported and the percentage of contribution of each parameter was furnished

Comparison of Metallic Foreign-Body Removal between Dynamic Ultrasound and Static Radiography in a Pigs' Feet Model

PubMed Central

Manson, William C; Ryan, James G; Ladner, Heidi; Gupta, Sanjey

2011-01-01

Introduction We compared the immediate cosmetic outcome of metallic foreign-body removal by emergency medicine (EM) residents with ultrasound guidance and conventional radiography. Methods This single-blinded, randomized, crossover study evaluated the ability of EM residents to remove metallic pins embedded in pigs' feet. Before the experiment, we embedded 1.5-cm metallic pins into numbered pigs' feet. We randomly assigned 14 EM residents to use either ultrasound or radiography to help remove the foreign body. Residents had minimal ultrasound experience. After a brief lecture, we provided residents with a scalpel, laceration kit, a bedside portable ultrasound machine, nipple markers, paper clips, a dedicated radiograph technician, and radiograph machine 20 feet away. After removal, 3 board-certified emergency physicians, who were blinded to the study group, evaluated the soft-tissue model by using a standardized form. They recorded incision length and cosmetic appearance on the Visual Analog Scale. Results In total, 28 foreign bodies were removed. No significant difference in the time of removal (P = 0.12), cosmetic appearance (P = 0.96), or incision length (P = 0.76) was found. Conclusion This study showed no difference between bedside ultrasound and radiography in assisting EM residents with metallic foreign-body removal from soft tissue. No significant difference was found in removal time or cosmetic outcome when comparing ultrasound with radiography. PMID:22224139

6. VIEW OF SHOWING DOWNSTREAM OUTLET PIPE AND COLLAR (12' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. VIEW OF SHOWING DOWNSTREAM OUTLET PIPE AND COLLAR (12' DIAMETER CORRUGATED STEEL PIPE ENCASED IN 6' CONCRETE), LOOKING NORTH - High Mountain Dams in Bonneville Unit, Island Lake Dam, Wasatch National Forest, Kamas, Summit County, UT

Comparison of Aerosol Delivery by Face Mask and Tracheostomy Collar.

PubMed

Bugis, Alaa A; Sheard, Meryl M; Fink, James B; Harwood, Robert J; Ari, Arzu

2015-09-01

The purpose of this study was to compare the performance of a tracheostomy collar, Wright mask, and aerosol mask attached to a jet nebulizer in facilitating aerosolized medication delivery to the lungs. We also compared albuterol delivery with open versus closed fenestration and determined the effect of inspiratory-expiratory ratio (I:E) on aerosol delivery. Albuterol (2.5 mg/3 mL) was administered to an in vitro model consisting of an adult teaching mannequin extrathoracic and upper airway with stoma intubated with an 8-mm fenestrated tracheostomy tube. The cuff was deflated. A collecting filter at the level of the bronchi was connected to a breathing simulator at a tidal volume of 400 mL, breathing frequency of 20 breaths/min, and I:E of 2:1 and 1:2. A jet nebulizer was operated with O2 at 8 L/min. Each interface was tested in triplicate. The flow was discontinued at the end of nebulization. For each test, the nebulizer was attached to a tracheostomy collar with the fenestration open or closed, a Wright mask, or an aerosol mask. Drug was analyzed by spectrophotometry (276 nm). A paired t test and analysis of variance were performed (P < .05). The mean ± SD percent albuterol dose delivered distal to the bronchi was greater with the tracheostomy collar with a closed fenestration (9.4 ± 1.5%) compared with an open fenestration (7.0 ± 0.8%). The doses delivered with the Wright mask (4.1 ± 0.6%) and aerosol mask (3.5 ± 0.04%) were both less than with the tracheostomy collar under either condition (P < .05). Increasing the I:E from 1:2 to 2:1 increased aerosol delivery by 2.5-4%, with significance for the tracheostomy collar with an open fenestration (11.6 ± 1.4%), Wright mask (7.2 ± 0.6%), and aerosol mask (6.1 ± 0.5%). In an adult tracheostomy model, the tracheostomy collar delivered more aerosol to the bronchi than the Wright or aerosol mask. An I:E of 2:1 caused greater aerosol deposition compared with an I:E of 1:2. During aerosol administration via a tracheostomy collar, closing the fenestration improved aerosol delivery. Copyright © 2015 by Daedalus Enterprises.

Pre-Finishing of SiC for Optical Applications

NASA Technical Reports Server (NTRS)

Rozzi, Jay; Clavier, Odile; Gagne, John

2011-01-01

13 Manufacturing & Prototyping A method is based on two unique processing steps that are both based on deterministic machining processes using a single-point diamond turning (SPDT) machine. In the first step, a high-MRR (material removal rate) process is used to machine the part within several microns of the final geometry. In the second step, a low-MRR process is used to machine the part to near optical quality using a novel ductile regime machining (DRM) process. DRM is a deterministic machining process associated with conditions under high hydrostatic pressures and very small depths of cut. Under such conditions, using high negative-rake angle cutting tools, the high-pressure region near the tool corresponds to a plastic zone, where even a brittle material will behave in a ductile manner. In the high-MRR processing step, the objective is to remove material with a sufficiently high rate such that the process is economical, without inducing large-scale subsurface damage. A laser-assisted machining approach was evaluated whereby a CO2 laser was focused in advance of the cutting tool. While CVD (chemical vapor deposition) SiC was successfully machined with this approach, the cutting forces were substantially higher than cuts at room temperature under the same machining conditions. During the experiments, the expansion of the part and the tool due to the heating was carefully accounted for. The higher cutting forces are most likely due to a small reduction in the shear strength of the material compared with a larger increase in friction forces due to the thermal softening effect. The key advantage is that the hybrid machine approach has the potential to achieve optical quality without the need for a separate optical finishing step. Also, this method is scalable, so one can easily progress from machining 50-mm-diameter samples to the 250-mm-diameter mirror that NASA desires.

Mechanical and Histological Effects of Resorbable Blasting Media Surface Treatment on the Initial Stability of Orthodontic Mini-Implants

PubMed Central

2016-01-01

Introduction. This study aimed to evaluate the effects of resorbable blasting media (RBM) treatment on early stability of orthodontic mini-implants by mechanical, histomorphometric, and histological analyses. Methods. Ninety-six (64 for mechanical study and 32 for histological study and histomorphometric analysis) titanium orthodontic mini-implants (OMIs) with machined (machined group) or RBM-treated (CaP) surface (RBM group) were implanted in the tibiae of 24 rabbits. Maximum initial torque (MIT) was measured during insertion, and maximum removal torque (MRT) and removal angular momentum (RAM) were measured at 2 and 4 weeks after implantation. Bone-to-implant contact (BIC) and bone area (BA) were analyzed at 4 weeks after implantation. Results. RBM group exhibited significantly lower MIT and significantly higher MRT and RAM at 2 weeks than machined group. No significant difference in MRT, RAM, and BIC between the two groups was noted at 4 weeks, although BA was significantly higher in RBM group than in machined group. RBM group showed little bone resorption, whereas machined group showed new bone formation after bone resorption. Conclusions. RBM surface treatment can provide early stability of OMIs around 2 weeks after insertion, whereas stability of machined surface OMIs may decrease in early stages because of bone resorption, although it can subsequently recover by new bone apposition. PMID:26942200

Machine tool task force

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, G.P.

1980-10-22

The Machine Tool Task Force (MTTF) is a multidisciplined team of international experts, whose mission was to investigate the state of the art of machine tool technology, to identify promising future directions of that technology for both the US government and private industry, and to disseminate the findings of its research in a conference and through the publication of a final report. MTTF was a two and one-half year effort that involved the participation of 122 experts in the specialized technologies of machine tools and in the management of machine tool operations. The scope of the MTTF was limited tomore » cutting-type or material-removal-type machine tools, because they represent the major share and value of all machine tools now installed or being built. The activities of the MTTF and the technical, commercial and economic signifiance of recommended activities for improving machine tool technology are discussed. (LCL)« less

Survival and Growth of Northern Red Oak Seedlings Following a Prescribed Burn

Treesearch

Paul S. Johnson

1974-01-01

Mortality of northern red oak seedlings in a spring prescribed burn was related to temperature near the root collar. Most of the 42 percent of seedlings that survived the burn developed new shoots from the root collar.

48 CFR 22.1101 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Applicability. 22.1101 Section 22.1101 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC... their blue-collar service workers and some white-collar service workers fairly, but it does not cover...

Apparatus for mounting a diode in a microwave circuit

DOEpatents

Liu, Shing-gong

1976-07-27

Apparatus for mounting a diode in a microwave circuit for making electrical contact between the circuit and ground and for dissipation of heat between the diode and a heat sink. The diode, supported on a thermally and electrically conductive member, is resiliently pressed in electrical contact with the microwave circuit. A tapered collar on the member is elastically deformably wedged into a tapered aperture formed in a heat sink. The wedged collar tightens firmly around the member establishing good thermal and electrical conduction from the diode to the heat sink and ground. Disassembly is facilitated because of the elastically deformed collar.

System for testing bearings

NASA Technical Reports Server (NTRS)

Gibson, John C. (Inventor)

1993-01-01

Disclosed here is a system for testing bearings wherein a pair of spaced bearings provides support for a shaft on which is mounted a bearing to be tested, this bearing being mounted in a bearing holder spaced from and in alignment with the pair of bearings. The bearing holder is provided with an annular collar positioned in an opening in the bearing holder for holding the bearing to be tested. A screw threaded through the bearing holder into engagement with the annular collar can be turned to force the collar radially out of alignment with the pair of bearings to apply a radial load to the bearing.

Tracking data from nine free-roaming Cheetahs (Acinonyx jubatus) collared in the Thabazimbi area, Limpopo Province, South Africa

PubMed Central

Marnewick, Kelly; Roxburgh, Lizanne; Somers, Michael J.

2017-01-01

Abstract Background In partnership with the University of Pretoria, the Endangered Wildlife Trust’s Carnivore Conservation Programme collared six male and three female free-roaming Cheetahs (Acinonyx jubatus) in the Thabazimbi area in Limpopo Province, South Africa. This study was undertaken to determine the spatial ecology of free-roaming Cheetahs that occur outside of formal protected areas on private ranchland, where they frequently come into conflict with, and are sometimes killed by, private landowners. The data were collected between September 2003 and November 2008, resulting in a total of 3165 location points (65 points from VHF collars and 3100 from GPS collars) for nine individual Cheetahs. New information This dataset provides distribution information about this Vulnerable species occurring outside of protected areas within South Africa. The dataset has been published to the Global Biodiversity Information Facility (www.GBIF.org) and provides the largest dataset on Cheetahs thus far, and, although it is spatially limited to a relatively small region on the African continent, it is the first study of its kind within South Africa. Also of significance is that the fate of 6 of the 9 collared Cheetahs is known, all except one of which died of anthropogenic causes. PMID:28325981

Informing Tobacco Cessation Benefit Use Interventions for Unionized Blue-Collar Workers: A Mixed-Methods Reasoned Action Approach.

PubMed

Yzer, Marco; Weisman, Susan; Mejia, Nicole; Hennrikus, Deborah; Choi, Kelvin; DeSimone, Susan

2015-08-01

Blue-collar workers typically have high rates of tobacco use but low rates of using tobacco cessation resources available through their health benefits. Interventions to motivate blue-collar tobacco users to use effective cessation support are needed. Reasoned action theory is useful in this regard as it can identify the beliefs that shape tobacco cessation benefit use intentions. However, conventional reasoned action research cannot speak to how those beliefs can best be translated into intervention messages. In the present work, we expand the reasoned action approach by adding additional qualitative inquiry to better understand blue-collar smokers' beliefs about cessation benefit use. Across three samples of unionized blue-collar tobacco users, we identified (1) the 35 attitudinal, normative, and control beliefs that represented tobacco users' belief structure about cessation benefit use; (2) instrumental attitude as most important in explaining cessation intention; (3) attitudinal beliefs about treatment options' efficacy, health effects, and monetary implications of using benefits as candidates for message design; (4) multiple interpretations of cessation beliefs (e.g., short and long-term health effects); and (5) clear implications of these interpretations for creative message design. Taken together, the findings demonstrate how a mixed-method reasoned action approach can inform interventions that promote the use of tobacco cessation health benefits.

Barriers and enabling factors for work-site physical activity programs: a qualitative examination.

PubMed

Fletcher, Gena M; Behrens, Timothyh K; Domina, Lorie

2008-05-01

Work sites offer a productive setting for physical activity (PA) promoting interventions. Still, PA participation remains low. Thus, the purpose of this study was to examine the reasoning behind commonly reported barriers and enabling factors to participation in PA programs in a work-site setting. Employees from a large city government were recruited to participate in focus groups, stratified by white- and blue-collar occupations. Responses from open-ended questions about factors influencing participation in PA programs were audio recorded and transcribed verbatim. Resulting data were analyzed with open and axial coding. The sample consisted of 60 employees composing 9 focus groups. Although time was the most common barrier between both groups, white-collars workers responded that scheduling and work conflicts were the most common barrier concerning time. Blue-collar workers indicated shift work as their most common barrier. In addition, health was a significant enabling factor for both occupational categories. White-collar workers were much more concerned with appearances and were more highly motivated by weight loss and the hopefulness of quick results than were blue-collar workers. These findings are important in the understanding of PA as it relates to the reasoning behind participation in work-site programs in regard to occupational status.

[Optimizing staff radiation protection in radiology by minimizing the effective dose].

PubMed

von Boetticher, H; Lachmund, J; Hoffmann, W; Luska, G

2006-03-01

In the present study the optimization of radiation protection devices is achieved by minimizing the effective dose of the staff members since the stochastic radiation effects correlate to the effective dose. Radiation exposure dosimetry was performed with TLD measurements using one Alderson Phantom in the patient position and a second phantom in the typical position of the personnel. Various types of protective clothing as well as fixed shields were considered in the calculations. It was shown that the doses of the unshielded organs (thyroid, parts of the active bone marrow) contribute significantly to the effective dose of the staff. Therefore, there is no linear relationship between the shielding factors for protective garments and the effective dose. An additional thyroid protection collar reduces the effective dose by a factor of 1.7 - 3.0. X-ray protective clothing with a 0.35 mm lead equivalent and an additional thyroid protection collar provides better protection against radiation than an apron with a 0.5 mm lead equivalent but no collar. The use of thyroid protection collars is an effective preventive measure against exceeding occupational organ dose limits, and a thyroid shield also considerably reduces the effective dose. Therefore, thyroid protection collars should be a required component of anti-X protection.

The development and validation of a job crafting measure for use with blue-collar workers

PubMed Central

Nielsen, Karina; Abildgaard, Johan Simonsen

2012-01-01

Job crafting describes a set of proactive behaviours in which employees may engage to shape their work in order to minimize hindering job demands and maximize resources and challenging demands. Such behaviours may be particularly important among blue-collar workers whose jobs are characterized by poor working conditions and low well-being. We present the development and adaptation of a job crafting measure that may be used among blue-collar workers, based on an existing scale by Tims, Bakker, and Derks (2012) that was not specifically developed for blue-collar workers. We test the validity and reliability of the measure in a longitudinal study based on multiple source information from mail delivery workers in Denmark (N = 362 at Time 1; N = 408 at Time 2). Results indicate the presence of five job crafting dimensions: increasing challenging demands, decreasing social job demands, increasing social job resources, increasing quantitative demands and decreasing hindering job demands. These can be reliably measured with 15 items. The measure shows acceptable discriminant and criterion validity, and test-retest reliability. The findings extend the application of the original questionnaire. They also add to knowledge of the job crafting behaviours in which blue-collar workers engage and link them to well-being outcomes. PMID:23236220

Slide system for machine tools

DOEpatents

Douglass, S.S.; Green, W.L.

1980-06-12

The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

Slide system for machine tools

DOEpatents

Douglass, Spivey S.; Green, Walter L.

1982-01-01

The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

A Mixed Message: The School Vending Machine.

ERIC Educational Resources Information Center

Hinkle, Margaret Murray

1982-01-01

Dental disease, especially tooth decay, is reaching epidemic proportions among children of school age. Since sugar is a major cause of tooth decay and since many confections are sold in schools, it is recommended that schools remove confections and other nonnutritional food items from vending machines, fund-raising activities, and food services.…

Importance of polarity change in the electrical discharge machining

NASA Astrophysics Data System (ADS)

Schulze, H.-P.

2017-10-01

The polarity change in the electrical discharge machining is still a problem and is often performed completely unmotivated or randomly. The polarity must be designated primarily, i.e. the anodic part must be clearly assigned to the tool or the workpiece. Normally, the polarity of the workpiece electrode is named. In paper, will be shown which determine fundamental causes the structural behavior of the cathode and anode, and when it makes sense to change the polarity. The polarity change is primarily dependent on the materials that are used as cathode and anode. This distinction must be made if there are pure metals or complex materials. Secondary of the polarity change is also affected by the process energy source (PES) and the supply line. The polarity change is mostly influenced by the fact that the removal is to be maximized on the workpiece while the tool is minimal removal (wear) occur. A second factor that makes a polarity change needed is the use of electrical discharge in combination with other machining methods, such as electrochemical machining (ECM).

A novel method of freeform surface grinding with a soft wheel based on industrial robots

NASA Astrophysics Data System (ADS)

Sha, Sheng-chun; Guo, Xiao-ling

2011-08-01

In order to meet the growing demand for high-quality images, optical elements of freeform surface are more and more applied to imaging system. However the fabrication of freeform surface optical elements is much more difficult than that of traditional spherical ones. Recent research on freeform surface manufacture often deals with precision machine tools which have limitations on dimensions and are always expensive. Little has been researched on industrial robots. In this paper, a new method of freeform surface grinding based on industrial robots was found. This method could be applied to both whole surface grinding as well as partial surface grinding. The diameter of lenses to be ground would not be restricted to the machine tool's size. In this method a high-speed-rotating soft wheel was used. The relation between removing amount and grinding time which could be called removing function was established and measured. The machining precision was achieved by means of controlling the grinding time instead of the machine tool or industrial robot itself. There are two main factors affecting the removing function: i).rotating speed of the soft wheel; ii).pressure between the wheel and the work piece. In this paper, two groups of experiments have been conducted. One is the removing function tested at constant rotating speed while under different pressure. The other is that tested under a certain pressure with variable speed. Tables and curves which can show the effect of speed and pressure on the removing efficiency have been obtained. Cause for inaccuracy between experiment data and calculated result according to the theory and the non-linearity in the curves was analyzed. Through these analyses the removing function could be concluded under certain condition including rotating speed and pressure. Finally several experiments were performed to verify the appropriateness of the removing function. It could also be concluded that this method was more efficient in comparison with traditional grinding technology particularly in the aspect of partial surface grinding. This paper also brought up a new idea that this method could be combined with other freeform surface grinding technics to realize a more flexible, efficient, reliable and economical type of optical fabrication. It would become a potential technic especially for partial optical surface grinding and repair.

Process development and monitoring in stripping of a highly transparent polymeric paint with ns-pulsed fiber laser

NASA Astrophysics Data System (ADS)

Jasim, Halah A.; Demir, Ali Gökhan; Previtali, Barbara; Taha, Ziad A.

2017-08-01

Laser paint removal was studied with ns-pulsed fiber laser on the combination of 20 μm-thick, white polymeric paint and Al alloy substrate. The response of paint to single pulse ablation was evaluated to measure the ablated zone dimensions. With this information, the effect of overlap, number of passes and pulse repetition rate was evaluated to investigate machining depth. Optical emission spectroscopy was used to investigate the machining behaviour as well as to propose monitoring strategies. The results showed that despite the high transparency of the paint, complete paint removal can be achieved with reduced substrate damage (Sa = 1.3 μm). The emission spectroscopy can be used to identify removal completion as well as the reach of substrate material. The observations were also used to explain a paint removal mechanism based on thermal expansion of the paint and mechanical action provided by the plasma expansion from the substrate material.

Repressing the effects of variable speed harmonic orders in operational modal analysis

NASA Astrophysics Data System (ADS)

Randall, R. B.; Coats, M. D.; Smith, W. A.

2016-10-01

Discrete frequency components such as machine shaft orders can disrupt the operation of normal Operational Modal Analysis (OMA) algorithms. With constant speed machines, they have been removed using time synchronous averaging (TSA). This paper compares two approaches for varying speed machines. In one method, signals are transformed into the order domain, and after the removal of shaft speed related components by a cepstral notching method, are transformed back to the time domain to allow normal OMA. In the other simpler approach an exponential shortpass lifter is applied directly in the time domain cepstrum to enhance the modal information at the expense of other disturbances. For simulated gear signals with speed variations of both ±5% and ±15%, the simpler approach was found to give better results The TSA method is shown not to work in either case. The paper compares the results with those obtained using a stationary random excitation.

Evaluation of materials proposed for use in space flight

NASA Technical Reports Server (NTRS)

Duncan, W. C.

1981-01-01

The primary irritancy and allergenicity of flame resistant treated cotton knit shirts proposed for use in space flight were evaluated. The knitted shirts were supplied by NASA as follows: knitted shirts with collars were made of two-ply mercerized single-knit cotton jersey. The fabric was treated with tetrakis (hydroxymethyl) phosphonium hydroxide and subsequently cured with gaseous ammonia (THPOH/NH3). The final treatment comprised adding on diammonium phosphate (DAP)/urea. The treated fabric was process scoured to remove extraneous materials, top softened and mechanically or chemically finished as required for specific needs. Diammonium phosphate is a more efficient flame inhabitant than the phosphonium; thus, the combination treatment served to impart higher resistance to ignition and sustained combustion as required by NASA test standard.

Cassini's RTGs undergo mechanical and electrical verification tests in the PHSF

NASA Technical Reports Server (NTRS)

1997-01-01

Workers in the Payload Hazardous Servicing Facility remove the storage collar from a radioisotope thermoelectric generator (RTG) in preparation for installation on the Cassini spacecraft. Cassini will be outfitted with three RTGs. The power units are undergoing mechanical and electrical verification tests in the PHSF. The RTGs will provide electrical power to Cassini on its 6.7-year trip to the Saturnian system and during its four-year mission at Saturn. RTGs use heat from the natural decay of plutonium to generate electric power. The generators enable spacecraft to operate at great distances from the Sun where solar power systems are not feasible. The Cassini mission is targeted for an Oct. 6 launch aboard a Titan IVB/Centaur expendable launch vehicle.

Improvements in Boron Plate Coating Technology for Higher Efficiency Neutron Detection and Coincidence Counting Error Reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Menlove, Howard Olsen; Henzlova, Daniela

This informal report presents the measurement data and information to document the performance of the advanced Precision Data Technology, Inc. (PDT) sealed cell boron-10 plate neutron detector that makes use of the advanced coating materials and procedures. In 2015, PDT changed the boron coating materials and application procedures to significantly increase the efficiency of their basic corrugated plate detector performance. A prototype sealed cell unit was supplied to LANL for testing and comparison with prior detector cells. Also, LANL had reference detector slabs from the original neutron collar (UNCL) and the new Antech UNCL with the removable 3He tubes. Themore » comparison data is presented in this report.« less

Career/Life Planning for Blue Collar Workers.

ERIC Educational Resources Information Center

Russell, Mary

1982-01-01

Lockheed Corporation's approach to career development for blue collar workers is based on these principles: providing accurate, current information for decision making, encouraging employees' personal and professional development, and integrating career planning into existing procedures and structures. (CPAD Network, 1190 South Bascom Avenue,…

75 FR 26738 - Sunshine Act Meeting Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-12

... Considered: Agenda: (1) Consideration of the trading of futures and binary options based on motion picture... revenues collared futures and binary option contracts, and the Cantor Exchange (``Cantor'') The Expendables... related to MDEX's Takers opening weekend motion picture revenues collared futures and binary option...

Mission Realignment of Goodfellow Air Force Base, Texas

DTIC Science & Technology

1989-12-01

rat snake, and desert kingsnake . Lizards include the collared lizard, Texas horned lizard, eastern tree lizard, Great Plains skink, ground skink...oQt rcnrictor Bullsnake .iuophis melanoleuc Great plains rat snake Elaphe guflt Desert kingsnake Lampropeltis getulus Collared lizard .rQty.U• collaris

Biomechanical comparison of two different collar structured implants supporting 3-unit fixed partial denture: a 3-D FEM study.

PubMed

Meriç, Gökçe; Erkmen, Erkan; Kurt, Ahmet; Eser, Atilim; Ozden, Ahmet Utku

2012-01-01

The purpose of the study was to compare the effects of two distinct collar geometries of implants on stress distribution in the bone as well as in the fixture-abutment complex, in the framework and in the veneering material of 3-unit fixed partial denture (FPD). The 3-dimensional finite element analysis method was selected to evaluate the stress distribution in the system composed of 3-unit FPD supported by two different dental implant systems with two distinct collar geometries; microthread collar structure (MCS) and non-microthread collar structure (NMCS). In separate load cases, 300 N vertical, 150 N oblique and 60 N horizontal, forces were utilized to simulate the multidirectional chewing forces. Tensile and compressive stress values in the cortical and cancellous bone and von Mises stresses in the fixture-abutment complex, in the framework and veneering material, were simulated as a body and investigated separately. In the cortical bone lower stress values were found in the MCS model, when compared with NMCS. In the cancellous bone, lower stress values were observed in the NMCS model when compared with MCS. In the implant-abutment complex, highest von Mises stress values were noted in the NMCS model; however, in the framework and veneering material, highest stress values were calculated in MCS model. MCS implants when compared with NMCS implants supporting 3-unit FPDs decrease the stress values in the cortical bone and implant-abutment complex. The results of the present study will be evaluated as a base for our ongoing FEA studies focused on stress distribution around the microthread and non-microthread collar geometries with various prosthesis design.

Serologic Survey for Selected Viral and Bacterial Swine Pathogens in Colombian Collared Peccaries ( Pecari tajacu) and Feral Pigs ( Sus scrofa).

PubMed

Montenegro, Olga L; Roncancio, Nestor; Soler-Tovar, Diego; Cortés-Duque, Jimena; Contreras-Herrera, Jorge; Sabogal, Sandra; Acevedo, Luz Dary; Navas-Suárez, Pedro Enrique

2018-06-14

In South America, wild populations of peccaries coexist with domestic and feral pigs, with poorly understood consequences. We captured 58 collared peccaries ( Pecari tajacu) and 15 feral pigs ( Sus scrofa) in locations of Colombia where coexistence of these species is known. Blood samples were tested for antibodies against four viral agents, classical swine fever virus (CSFV), Aujeszky's disease virus (ADV), porcine circovirus (PCV-2), and vesicular stomatitis virus (New Jersey and Indiana subtypes) and two bacterial agents, Brucella spp. and six serovars of Leptospira interrogans. The prevalence of CSFV was 5% (3/58) in collared peccaries and 7% (1/15) in feral pigs. The prevalence of PCV-2 was 7% (1/15) in collared peccaries and 67% (2/3) in feral pigs. Vesicular stomatitis prevalence was 33% (8/24) in collared peccaries and 67% (4/6) in feral pigs. Leptospira prevalence was 78% (39/50) in collared peccary and 100% (8/8) in feral pigs; bratislava, grippotyphosa, icterohaemorrhagiae, and pomona were the most frequent serovars. Also, the only white-lipped peccary ( Tayassu pecari) sampled was positive for L. interrogans serovar bratislava and for vesicular stomatitis virus, New Jersey strain. No samples were positive for ADV or Brucella. The seroprevalence of antibodies against L. interrogans was similar to that observed in other studies. Icterohaemorrhagiae appears to be a common serovar among in situ and ex situ peccary populations. Positive antibodies against PVC-2 represent a novel report of exposure to this pathogen in Colombian peccaries. Our results indicate the possible transmission of various pathogens, important for pig farms, in the studied pig and peccaries.

Maternal socio-economic status based on occupation and autism spectrum disorders: a national case-control study.

PubMed

Lehti, Venla; Hinkka-Yli-Salomäki, Susanna; Cheslack-Postava, Keely; Gissler, Mika; Brown, Alan S; Sourander, Andre

2015-01-01

The association between parental socio-economic status (SES) and autism spectrum disorders (ASD) has been studied in several countries, but the results have been contradictory. The aim of this study was to examine the association between maternal SES and subtypes of ASD in Finland. A national case-control study was conducted. Children born in 1991-2005 and diagnosed with ASD by the year 2007 were identified from the Finnish Hospital Discharge Register (FHDR). Their matched controls were selected from the Finnish Medical Birth Register (FMBR). There were 3468 cases and 13,868 controls. The information on maternal SES was collected from the FMBR and categorized into upper white-collar workers (referent), lower white-collar workers, blue-collar workers and "others", consisting of students, housewives and other groups with unknown SES. The statistical test used was conditional logistic regression. The likelihood of ASD was increased among offspring of mothers who belong to the group "others" (adjusted OR = 1.2, 95% CI 1.009-1.3). The likelihood of Asperger's syndrome was decreased among offspring of lower white-collar workers (adjusted OR = 0.8, 95% CI 0.6-0.9) and blue-collar workers (adjusted OR = 0.6, 95% CI 0.5-0.7). The likelihood of pervasive developmental disorder not otherwise specified (PDD-NOS) was increased among offspring of blue-collar workers (adjusted OR = 1.5, 1.2-1.9) and "others" (adjusted OR = 1.3, 1.1-1.7). No association was found between maternal SES and childhood autism. The association between maternal SES and ASD differs by ASD subtype. Socio-economic groups might differ from each other by risk factors for ASD subtypes or by their service use.

Ergonomic assessment of enhanced protection under body armour combat shirt neck collars.

PubMed

Breeze, John; Granger, C J; Pearkes, T D; Clasper, J C

2014-03-01

Combat neck injury due to explosively propelled fragments is a significant cause of mortality and long-term morbidity in UK soldiers deployed on current operations. Reinforcing the collar of the existing under body armour combat shirt (UBACS) has been suggested as a potential method for reducing the incidence of combat neck injury. 20 soldiers serving in Afghanistan objectively compared three designs of enhanced protection UBACS (EP-UBACS) using 10 representative military tasks against a baseline of a standard UBACS. Each EP-UBACS design was trialled using three constituent materials: two layers of para-aramid felt, one layer of ultra high molecule weight polyethylene (UHMWPE) felt or two layers of a silk fabric. Subjective assessment of these nine configurations in terms of comfort, heat dissipation and overall acceptability were compared with the standard UBACS using a χ² test. All military tasks could be performed with all nine configurations of EP-UBACS. Although silk was the most comfortable material, it was not functionally practical in any of the three designs. Crossover collars incorporating UHMWPE or para-aramid were the only two of the nine configurations to demonstrate similar user acceptability to a standard UBACS. The EP-UBACS has the potential to provide neck protection without reducing performance incorporating materials analogous to either of the felts assessed in this study. The collar should provide stand-off from the skin to improve heat dissipation and comfort, which can be maximised by changing the current UBACS collar shape to one that crosses over at the front. Should a zip be desired, it should be moved to one side of the midline to reduce rubbing on the chin and be covered with ballistic protective material. Additional semi-circles of silk beneath the collar at the front and back would improve protection without affecting comfort.

Research on the magnetorheological finishing (MRF) technology with dual polishing heads

NASA Astrophysics Data System (ADS)

Huang, Wen; Zhang, Yunfei; He, Jianguo; Zheng, Yongcheng; Luo, Qing; Hou, Jing; Yuan, Zhigang

2014-08-01

Magnetorheological finishing (MRF) is a key polishing technique capable of rapidly converging to the required surface figure. Due to the deficiency of general one-polishing-head MRF technology, a dual polishing heads MRF technology was studied and a dual polishing heads MRF machine with 8 axes was developed. The machine has the ability to manufacture large aperture optics with high figure accuracy. The large polishing head is suitable for polishing large aperture optics, controlling large spatial length's wave structures, correcting low-medium frequency errors with high removal rates. While the small polishing head has more advantages in manufacturing small aperture optics, controlling small spatial wavelength's wave structures, correcting mid-high frequency and removing nanoscale materials. Material removal characteristic and figure correction ability for each of large and small polishing head was studied. Each of two polishing heads respectively acquired stable and valid polishing removal function and ultra-precision flat sample. After a single polishing iteration using small polishing head, the figure error in 45mm diameter of a 50 mm diameter plano optics was significantly improved from 0.21λ to 0.08λ by PV (RMS 0.053λ to 0.015λ). After three polishing iterations using large polishing head , the figure error in 410mm×410mm of a 430mm×430mm large plano optics was significantly improved from 0.40λ to 0.10λ by PV (RMS 0.068λ to 0.013λ) .This results show that the dual polishing heads MRF machine not only have good material removal stability, but also excellent figure correction capability.

Risk factors for sciatica leading to hospitalization.

PubMed

Euro, Ulla; Knekt, P; Rissanen, H; Aromaa, A; Karppinen, J; Heliövaara, M

2017-06-13

To study the known or suspected risk factors for sciatica: Tallness, overweight, smoking, leisure-time physical exercise, self-reported health and occupation, and how they predict hospitalizations due to sciatica. Only a few cohort studies have previously focused on the risk factors for sciatica. The 13,095 subjects, free from low back disorders at the baseline in 1973-1976 were followed up to the end of 2011 via the Care Register for Health Care. Along with an invitation to the health examination, a basic questionnaire concerning lifestyle factors was sent to participants. The outcome measure was incident sciatica leading to hospitalization. Altogether 702 incident sciatica cases occurred. Among men, the adjusted hazard ratio (HR) with 95% confidence interval (CI) was 2.57 (95% CI 1.47-4.50) in metal or machine work, and 1.44 (1.06-1.95) in other industrial work, compared to that in white-collar occupations. Among women, the corresponding risk estimates were 1.81 (1.18-2.78) for nurses and related occupations, 1.56 (1.05-2.31) for sales workers, and 1.46 (1.03-2.08) for industrial workers. Among men, physical exercise during leisure predicted a decrease in the risk of sciatica (0.74; 0.55-1.00); this association was significantly pronounced in white-collar occupations (0.38; 0.18-0.88). Among women, the association between body mass index and the risk of sciatica was only modest, but varied greatly between different occupations. Physically demanding work is a strong risk factor for sciatica. Leisure-time physical activity seems to protect men against sciatica, while overweight is a risk factor among women. However, occupation substantially modifies these associations.

49 CFR 1242.28 - Roadway machines, small tools and supplies, and snow removal (accounts XX-19-36 to XX-19-38...

Code of Federal Regulations, 2010 CFR

2010-10-01

... snow removal (accounts XX-19-36 to XX-19-38, inclusive). 1242.28 Section 1242.28 Transportation Other... tools and supplies, and snow removal (accounts XX-19-36 to XX-19-38, inclusive). Separate common expenses according to distribution of common expenses listed in § 1242.10, Administration—Track (account XX...

DEGATING WORKERS REMOVING SPRUES AND RUNNERS MANUALLY WITH SLEDGEHAMMERS AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DEGATING WORKERS REMOVING SPRUES AND RUNNERS MANUALLY WITH SLEDGEHAMMERS AND POWERED PNEUMATIC SEPARATORS FROM CASTINGS FROM ALL MOLDING MACHINES BEFORE SEPARATING PIECES INTO BINS AND TRANSPORTING THEM TO GRINDING AREAS. - Southern Ductile Casting Company, Shaking, Degating & Sand Systems, 2217 Carolina Avenue, Bessemer, Jefferson County, AL

Chatter active control in a lathe machine using magnetostrictive actuator

NASA Astrophysics Data System (ADS)

Nosouhi, R.; Behbahani, S.

2011-01-01

This paper analyzes the chatter phenomena in lathe machines. Chatter is one of the main causes of inaccuracy, reduction of life cycle of the machine and tool wear in machine tools. This phenomenon limits the depth of cut as a function of the cutting speed, which consequently reduces the material removal rate and machining efficiency. Chatter control is therefore important since it increases the stability region in machining and increases the critical depth of cut in machining case. To control the chatter in lathe machines, a magnetostrictive actuator is used. The materials with magnetostriction properties are kind of smart materials of which their length changes as a result of applying an exterior magnetic field, which make them suitable for control applications. It is assumed that the actuator applies the proper force exactly at the point where the machining force is applied on the tool. In this paper the chatter stability lobes is excelled as a result of applying a PID controller on the magnetostrictive actuator equipped-tool in turning.

Navy frogmen attach flotation collar to Apollo 7 command module

NASA Image and Video Library

1968-10-22

U.S. Navy frogmen attach a flotation collar to the Apollo 7 command module during recovery operations in the Atlantic. The Apollo 7 spacecraft splashed down at 7:11 a.m., October 22, 1968, approximately 200 nautical miles south-southwest of Bermuda.

Lock-pin and collar fastening system : final report.

DOT National Transportation Integrated Search

1997-02-01

In 1993, a steel girder I-beam deck was extended to cross a new on-ramp at the Marquam Bridge Interchange in Portland, Oregon. The steel members of this new structure were fastened together using the lock-pin and collar fastening system. : These fast...

Infusions of muscimol into the lateral septum do not reduce rats' defensive behaviors toward a cat odor stimulus.

PubMed

Chee, San-San A; Patel, Ronak; Menard, Janet L

2015-01-01

The lateral septum (LS) is implicated in behavioral defense. We tested whether bilateral infusions of the GABAA receptor agonist muscimol into the LS suppress rats' defensive responses to cat odor. Rats received intra-LS infusions of either saline or muscimol (40 ng/rat) and were exposed to either a piece of a cat collar that had been previously worn by a cat or to a control (cat odor free) collar. Rats exposed to the cat odor collar displayed more head-out postures, while intra-LS application of muscimol reduced the number of head-out postures. However, this reduction was also present in rats exposed to a control (cat odor free) collar. This latter finding suggests that despite its involvement in other defensive behaviors (e.g., open arm avoidance in the elevated plus maze), the LS does not selectively regulate rats' receptor defensive responding to the olfactory cues present in our cat odor stimulus. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Optimized cutting and forming parameters for a robust collar drawing process for hot-rolled complex-phase steels

NASA Astrophysics Data System (ADS)

Kovacs, S.; Beier, T.; Woestmann, S.

2017-09-01

The demands on materials for automotive applications are steadily increasing. For chassis components, the trend is towards thinner and higher strength materials for weight and cost reduction. In view of attainable strengths of up to 1200 MPa for hot rolled materials, certain aspects need to be analysed and evaluated in advance in the development process using these materials. Collars in particular, for example in control arms, have been in focus for part and process design. Issues concerning edge and surface cracks are observed due to improper geometry and process layout. The hole expansion capability of the chosen material grade has direct influence on the achievable collar height. In general, shear cutting reduces the residual formability of blank edges and the hole expansion capability. In this paper, using the example of the complex phase steel CP-W® 800 of thyssenkrupp, it is shown how a suitable geometry of a collar and optimum shear cutting parameters can be chosen.

Collar nut and thrust ring

DOEpatents

Lowery, Guy B.

1991-01-01

A collar nut comprises a hollow cylinder having fine interior threads at one end for threadably engaging a pump mechanical seal assembly and an inwardly depending flange at the other end. The flange has an enlarged portion with a groove for receiving an O-ring for sealing against the intrusion of pumpage from the exterior. The enlarged portion engages a thrust ring about the pump shaft for crushing a hard O-ring, such as a graphite O-ring. The hard O-ring seals the interior of the mechanical seal assembly and pump housing against the loss of lubricants or leakage of pumpage. The fine threads of the hollow cylinder provide the mechanical advantage for crushing the hard O-ring evenly and easily with a hand tool from the side of the collar nut rather than by tightening a plurality of bolts from the end and streamlines the exterior surface of the mechanical seal. The collar nut avoids the spatial requirements of bolt heads at the end of a seal and associated bolt head turbulence.

Characteristics of combustion flame sprayed nickel aluminum using a Coanda Assisted Spray Manipulation collar for off-normal deposits

NASA Astrophysics Data System (ADS)

Archibald, Reid S.

A novel flame spray collar called the Coanda Assisted Spray Manipulation collar (CSM) has been tested for use on the Sulzer Metco 5P II combustion flame spray gun. A comparison study of the stock nozzle and the CSM has been performed by evaluating the porosity, surface roughness, microhardness, tensile strength and microscopy of normal and off-normal sprayed NiAl deposits. The use of the CSM collar resulted in the need to position the sprayed coupons closer to the gun, which in turn affected the particle impact energy and particle temperatures of the NiAl powder. For the CSM, porosities had a larger scatterband, surface roughness was comparably the same, microhardness was lower, and tensile strength was higher. The microscopy analysis revealed a greater presence of unmelted particles and steeper intersplat boundaries for the CSM. For both processes, the porosity and surface roughness increased and the microhardness decreased as the spray angle decreased.

Military positions and post-service occupational mobility of Union Army veterans, 1861–1880

PubMed Central

Lee, Chulhee

2009-01-01

Although the Civil War has attracted a great deal of scholarly attention, little is known about how different wartime experiences of soldiers influenced their civilian lives after the war. This paper examines how military rank and duty of Union Army soldiers while in service affected their post-service occupational mobility. Higher ranks and non-infantry duties appear to have provided more opportunities for developing skills, especially those required for white-collar jobs. Among the recruits who were unskilled workers at the time of enlistment, commissioned and non-commissioned officers were much more likely to move up to a white-collar job by 1880. Similarly, unskilled recruits assigned to white-collar military duties were more likely to enter a white-collar occupation by 1880. The higher occupational mobility of higher-ranking soldiers is likely to have resulted from disparate human capital accumulations offered by their military positions rather than from their superior abilities. PMID:20234792

Efficacy of orthotic immobilization of the unstable subaxial cervical spine of the elderly patient: investigation in a cadaver model

PubMed Central

Bednar, Drew A.

2004-01-01

Objective To assess the efficacy of soft, semirigid and hard cervical collars to immobilize the neck in a destabilized cadaver model. Design This is a laboratory experiment. Setting The anatomy research lab of McMaster University. Patients None. Fresh cadavers from elderly patients suffering terminal medical illness and free of cervical structural disease were studied. Interventions Destabilizing discoligamentous lesions of the neck were created in the cadavers. Radiographs were taken in maximum displacement in the prone, decubitus and side-bending positions, first unsupported and then with soft, semirigid and hard collars applied. Displacements in angulation and translation were measured from the radiographs. Outcome measures Radiographic displacement under gravity load. Results In all cases there was no effective limitation of pathological displacement, and in many cases displacement was increased after collar application. Conclusions Cervical collars do not effectively support the unstable neck, and may be ineffective in preventing pathological displacements. PMID:15362326

Magnetorheological finishing for removing surface and subsurface defects of fused silica optics

NASA Astrophysics Data System (ADS)

Catrin, Rodolphe; Neauport, Jerome; Taroux, Daniel; Cormont, Philippe; Maunier, Cedric; Lambert, Sebastien

2014-09-01

We investigate the capacity of magnetorheological finishing (MRF) process to remove surface and subsurface defects of fused silica optics. Polished samples with engineered surface and subsurface defects were manufactured and characterized. Uniform material removals were performed with a QED Q22-XE machine using different MRF process parameters in order to remove these defects. We provide evidence that whatever the MRF process parameters are, MRF is able to remove surface and subsurface defects. Moreover, we show that MRF induces a pollution of the glass interface similar to conventional polishing processes.

Lung cancer risk among workers in the construction industry: results from two case-control studies in Montreal.

PubMed

Lacourt, Aude; Pintos, Javier; Lavoué, Jérôme; Richardson, Lesley; Siemiatycki, Jack

2015-09-22

Given the large number of workers in the construction industry, it is important to derive accurate and valid estimates of cancer risk, and in particular lung cancer risk. In most previous studies, risks among construction workers were compared with general populations including blue and white collar workers. The main objectives of this study were to assess whether construction workers experience excess lung cancer risk, and whether exposure to selected construction industry exposures carries excess risks. We wished to address these objectives within the sub-population of blue collar workers. Two case-control studies were conducted in Montreal. Combined, they included 1593 lung cancer cases and 1427 controls, of whom 1304 cases and 1081 controls had been blue collar workers. Detailed lifetime job histories were obtained and translated by experts into histories of exposure to chemical agents. The two key analyses were to estimate odds ratio (OR) estimates of lung cancer risk: a) for all blue-collar construction workers compared with other blue-collar workers, and b) for construction workers exposed to each of 20 exposure agents found in the construction industry compared with construction workers unexposed to those agents. All analyses were conducted using unconditional logistic regression adjusted for socio-demographic factors and smoking history. The OR for all construction workers combined was 1.11 (95 % CI: 0.90-1.38), based on 381 blue collar construction workers. Analyses of specific exposures were hampered by small numbers and imprecise estimates. While none of 20 occupational agents examined was significantly associated with lung cancer, the following agents manifested non-significantly elevated ORs: asbestos, silica, Portland cement, soil dust, calcium oxide and calcium sulfate. Compared with other blue collar workers, there was only a slight increased risk of lung cancer for subjects who ever held an occupation in the construction industry. The analyses of agents within the construction industry produced imprecise estimates of risk, but nevertheless pointed to some plausible associations. Excess risks for asbestos and silica were in line with previous knowledge. The possible excess risks with the other inorganic dusts require further corroboration.

Mistaking minds and machines: How speech affects dehumanization and anthropomorphism.

PubMed

Schroeder, Juliana; Epley, Nicholas

2016-11-01

Treating a human mind like a machine is an essential component of dehumanization, whereas attributing a humanlike mind to a machine is an essential component of anthropomorphism. Here we tested how a cue closely connected to a person's actual mental experience-a humanlike voice-affects the likelihood of mistaking a person for a machine, or a machine for a person. We predicted that paralinguistic cues in speech are particularly likely to convey the presence of a humanlike mind, such that removing voice from communication (leaving only text) would increase the likelihood of mistaking the text's creator for a machine. Conversely, adding voice to a computer-generated script (resulting in speech) would increase the likelihood of mistaking the text's creator for a human. Four experiments confirmed these hypotheses, demonstrating that people are more likely to infer a human (vs. computer) creator when they hear a voice expressing thoughts than when they read the same thoughts in text. Adding human visual cues to text (i.e., seeing a person perform a script in a subtitled video clip), did not increase the likelihood of inferring a human creator compared with only reading text, suggesting that defining features of personhood may be conveyed more clearly in speech (Experiments 1 and 2). Removing the naturalistic paralinguistic cues that convey humanlike capacity for thinking and feeling, such as varied pace and intonation, eliminates the humanizing effect of speech (Experiment 4). We discuss implications for dehumanizing others through text-based media, and for anthropomorphizing machines through speech-based media. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

PACER SHARE Productivity and Personnel Management Demonstration: Appendices to Third-Year Evaluation

DTIC Science & Technology

1994-01-01

RECOOED, NBITE/ BLOE COLLAR RSOODED o PAY LEVElS REOODEO-CAREER•1,NO CAREER•O BOlli LONG WORlt£0 lflTH liOIEDlAT£ SUPR? BON LONG BEEN A FEDERAL GOVT...lDNG WORIIED IN OS? R.EOOOEO: M’HITE/ BLOE COLLAR R.ECOOE01 PAY LE’VEIS REOOOEO·CAREER•1,NO CAREER·O BON LOW WORKED WITH IMMEDIATE SIJPR? HOW lDNG...0.165 0.8690 BOW IDNG WORKED IN OS? V156N l -O.:.I7U:.17 0.02566108 -10.570 0.0001 RECOOED: NIIITE/ BLOE COLLAR V157C l 0 .-f06278 0.01999255 20.321

Accidental hanging by a T-shirt collar in a man with morphine intoxication: an unusual case.

PubMed

Kodikara, Sarathchandra; Alagiyawanna, Ramesh

2011-09-01

Accidental hanging is rare across all age groups, and it is even rarer in the adult population except in autoerotic asphyxia. Few cases have been reported in the literature, which describe unusual patterns of accidental hanging. This article focuses on an unusual pattern of accidental hanging of a 25-year-old man, who was in a state of morphine-induced central nervous system depression and found dead in a sitting position with the collar of his T-shirt hanging off a jutting-out root of a tree. The hanged collar acted as a ligature compressing the neck.

20 CFR 404.1568 - Skill requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... are handling, feeding and offbearing (that is, placing or removing materials from machines which are automatic or operated by others), or machine tending, and a person can usually learn to do the job in 30... judgment to do simple duties that can be learned on the job in a short period of time. The job may or may...

20 CFR 404.1568 - Skill requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... are handling, feeding and offbearing (that is, placing or removing materials from machines which are automatic or operated by others), or machine tending, and a person can usually learn to do the job in 30... judgment to do simple duties that can be learned on the job in a short period of time. The job may or may...

High speed metal removal

NASA Astrophysics Data System (ADS)

Pugh, R. F.; Pohl, R. F.

1982-10-01

Four types of steel (AISI 1340, 4140, 4340, and HF-1) which are commonly used in large caliber projectile manufacture were machined at different hardness ranges representing the as-forged and the heat treated condition with various ceramic tools using ceramic coated tungsten carbide as a reference. Results show that machining speeds can be increased significantly using present available tooling.

Ultra-high surface speed for metal removal, artillery shell

NASA Astrophysics Data System (ADS)

Pugh, R. F.; Walsh, M. R.; Pohl, R. F.

1981-07-01

Four types of steel (AISI 1340, 4140, 4340, and HF-1) which are commonly used in large caliber projectile manufacture were machined with five types of tools at different hardness ranges representing the as-forged and the heat-treated condition. Results show that machining speeds can be increased significantly over current practice using the present available tooling.

Methods for increasing the harshness of texture on old concrete pavements : mechanical alteration with the Klarcrete machine.

DOT National Transportation Integrated Search

1973-01-01

Experiments were performed with the British Klarcrete machine-on the Emporia bypass (I-95) in Greensville County to determine if it was capable of removing the top layer of roadway to a depth of between 1/8 to 1/4 inch, and in so doing expose a fresh...

20 CFR 404.1568 - Skill requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... are handling, feeding and offbearing (that is, placing or removing materials from machines which are automatic or operated by others), or machine tending, and a person can usually learn to do the job in 30... judgment to do simple duties that can be learned on the job in a short period of time. The job may or may...

20 CFR 404.1568 - Skill requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... are handling, feeding and offbearing (that is, placing or removing materials from machines which are automatic or operated by others), or machine tending, and a person can usually learn to do the job in 30... judgment to do simple duties that can be learned on the job in a short period of time. The job may or may...

20 CFR 404.1568 - Skill requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... are handling, feeding and offbearing (that is, placing or removing materials from machines which are automatic or operated by others), or machine tending, and a person can usually learn to do the job in 30... judgment to do simple duties that can be learned on the job in a short period of time. The job may or may...

Agile Machining and Inspection Non-Nuclear Report (NNR) Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lazarus, Lloyd

This report is a high level summary of the eight major projects funded by the Agile Machining and Inspection Non-Nuclear Readiness (NNR) project (FY06.0422.3.04.R1). The largest project of the group is the Rapid Response project in which the six major sub categories are summarized. This project focused on the operations of the machining departments that will comprise Special Applications Machining (SAM) in the Kansas City Responsive Infrastructure Manufacturing & Sourcing (KCRIMS) project. This project was aimed at upgrading older machine tools, developing new inspection tools, eliminating Classified Removable Electronic Media (CREM) in the handling of classified Numerical Control (NC) programsmore » by installing the CRONOS network, and developing methods to automatically load Coordinated-Measuring Machine (CMM) inspection data into bomb books and product score cards. Finally, the project personnel leaned perations of some of the machine tool cells, and now have the model to continue this activity.« less

Why "Working Smarter" Isn't Working: White-Collar Productivity Improvement.

ERIC Educational Resources Information Center

Shaw, Edward

2001-01-01

Discusses the productivity and work days of white collar workers. Topics include productivity improvement; task analysis; the amount of time spent reading, and how to reduce it by improving writing skills; time spent in meetings; empowered time management; and sustaining a climate for change. (LRW)

Dynamics of Segregation and Earnings in Brown-Collar Occupations.

ERIC Educational Resources Information Center

Catanzarite, Lisa

2002-01-01

Longitudinal analysis of Los Angeles census data showed that recently immigrated Latinos were concentrated in poorly paid, irregular occupations. Their marginalization in these "brown-collar" occupations was accompanied by depreciation in median pay for both immigrant and native workers in these jobs. (Contains 100 references.) (SK)

Occupations of Federal White-Collar Workers.

ERIC Educational Resources Information Center

Civil Service Commission, Washington, DC. Manpower Statistics Div.

This compilation of information about white-collar personnel employed full-time by the Federal Government in 1968, is intended to assist in analyzing and evaluating manpower utilization and requirements, and in determining policies concerning national manpower resources. It should serve as a basic reference for guidance, counseling, or other…

Professional Employees Turn to Unions

ERIC Educational Resources Information Center

Chamot, Dennis

1976-01-01

White-collar and professional employees are increasingly turning to unions to combat their loss of independence as employees of large organizations. Managers should realize that they and professional employees have different viewpoints about job situations and that the current trend toward white-collar unionism is apt to continue. (JG)

The North-South Earnings Gap: Changes during the 1960's and 1970's.

ERIC Educational Resources Information Center

Hirschman, Charles; Blankenship, Kim

1981-01-01

A study of earnings differences between northern and southern states shows that white-collar workers in both areas now receive roughly equal pay. Women, blacks and blue-collar workers in the South still receive significantly lower wages than their northern counterparts. (AM)

Effect Of Pressure Support Versus Unassisted Breathing Through A Tracheostomy Collar On Weaning Duration In Patients Requiring Prolonged Mechanical Ventilation: A Randomized Trial

PubMed Central

Jubran, Amal; Grant, Brydon J.B.; Duffner, Lisa A.; Collins, Eileen G.; Lanuza, Dorothy M.; Hoffman, Leslie A.; Tobin, Martin J.

2013-01-01

Context Patients requiring prolonged mechanical ventilation (more than 21 days) are commonly weaned at long-term acute care hospitals (LTACHs). The most effective method of weaning such patients has not been investigated. Objective To compare weaning duration with pressure support versus unassisted breathing through a tracheostomy (trach collar) in patients transferred to a LTACH for weaning from prolonged ventilation. Design, Settings, and Participants Between 2000 and 2010, a randomized study was conducted in tracheotomized patients transferred to a single LTACH for weaning from prolonged ventilation. Of 500 patients who underwent a five-day screening procedure, 316 failed and were randomly assigned to wean with pressure support (n=155) or a trach collar (n=161). Six- and twelve-month survival was also determined. Main outcome measure Primary outcome was weaning duration. Secondary outcome was survival at six and twelve months after enrollment. Results Of 316 patients, four were withdrawn and not included in analysis. Of 152 patients in the pressure-support arm, 68 (44.7%) were weaned; 22 (14.5%) died. Of 160 patients in the trach-collar arm, 85 (53.1%) were weaned; 16 (10.0%) died. Median weaning time was shorter with trach collar than with pressure support: 15 [interquartile range, 8–25] versus 19 [12–31] days, p=0.004. The hazard ratio (HR) for successful weaning rate was higher with trach collar than with pressure support (HR, 1.43; 95% confidence interval [CI], 1.03–1.98, p<0.03) after adjusting for baseline clinical covariates. Trach collar achieved faster weaning than did pressure support among subjects who failed the screening procedure at 12–120 hours (HR, 3.33; 95% CI, 1.44–7.70, p<0.01), whereas weaning time was equivalent with the two methods in patients who failed the screening procedure within 0–12 hours. Mortality was equivalent in the pressure-support and trach-collar arms at six months (55.9% versus 51.3%; 4.7 difference, 95% CI −6.4 to 15.7%) and twelve months (66.4% versus 60.0%; 6.5 difference, 95% CI −4.2 to 17.1 %). Conclusion Among patients requiring prolonged mechanical ventilation and treated at a single long-term care facility, unassisted breathing through a tracheostomy, compared with pressure support, resulted in shorter median weaning time, although weaning mode had no effect on survival at 6 and 12 months. PMID:23340588

Effect of pressure support vs unassisted breathing through a tracheostomy collar on weaning duration in patients requiring prolonged mechanical ventilation: a randomized trial.

PubMed

Jubran, Amal; Grant, Brydon J B; Duffner, Lisa A; Collins, Eileen G; Lanuza, Dorothy M; Hoffman, Leslie A; Tobin, Martin J

2013-02-20

Patients requiring prolonged mechanical ventilation (>21 days) are commonly weaned at long-term acute care hospitals (LTACHs). The most effective method of weaning such patients has not been investigated. To compare weaning duration with pressure support vs unassisted breathing through a tracheostomy collar in patients transferred to an LTACH for weaning from prolonged ventilation. Between 2000 and 2010, a randomized study was conducted in tracheotomized patients transferred to a single LTACH for weaning from prolonged ventilation. Of 500 patients who underwent a 5-day screening procedure, 316 did not tolerate the procedure and were randomly assigned to receive weaning with pressure support (n = 155) or a tracheostomy collar (n = 161). Survival at 6- and 12-month time points was also determined. Primary outcome was weaning duration. Secondary outcome was survival at 6 and 12 months after enrollment. Of 316 patients, 4 were withdrawn and not included in analysis. Of 152 patients in the pressure-support group, 68 (44.7%) were weaned; 22 (14.5%) died. Of 160 patients in the tracheostomy collar group, 85 (53.1%) were weaned; 16 (10.0%) died. Median weaning time was shorter with tracheostomy collar use (15 days; interquartile range [IQR], 8-25) than with pressure support (19 days; IQR, 12-31), P = .004. The hazard ratio (HR) for successful weaning rate was higher with tracheostomy collar use than with pressure support (HR, 1.43; 95% CI, 1.03-1.98; P = .033) after adjusting for baseline clinical covariates. Use of the tracheostomy collar achieved faster weaning than did pressure support among patients who did not tolerate the screening procedure between 12 and 120 hours (HR, 3.33; 95% CI, 1.44-7.70; P = .005), whereas weaning time was equivalent with the 2 methods in patients who did not tolerate the screening procedure within 0 to 12 hours. Mortality was equivalent in the pressure-support and tracheostomy collar groups at 6 months (55.92% vs 51.25%; 4.67% difference, 95% CI, -6.4% to 15.7%) and at 12 months (66.45% vs 60.00%; 6.45% difference, 95% CI, -4.2% to 17.1%). Among patients requiring prolonged mechanical ventilation and treated at a single long-term care facility, unassisted breathing through a tracheostomy, compared with pressure support, resulted in shorter median weaning time, although weaning mode had no effect on survival at 6 and 12 months. clinicaltrials.gov Identifier: NCT01541462.

30 CFR 18.34 - Motors.

Code of Federal Regulations, 2011 CFR

2011-07-01

... at the flame-arresting portion might require such machining. (4) Ball and roller bearings and oil... clearance(s) shall conform to the requirements of § 18.31. (6) Oil seals shall be removed from motors prior to submission for explosion tests. Note: Oil seals will be removed from motors prior to explosion...

27 CFR 479.49 - Failure to register change or removal.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Failure to register change or removal. 479.49 Section 479.49 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE DEVICES...

27 CFR 479.49 - Failure to register change or removal.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2011-04-01 2010-04-01 true Failure to register change or removal. 479.49 Section 479.49 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE DEVICES...

27 CFR 479.49 - Failure to register change or removal.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2013-04-01 2013-04-01 false Failure to register change or removal. 479.49 Section 479.49 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE DEVICES...

27 CFR 479.49 - Failure to register change or removal.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2012-04-01 2010-04-01 true Failure to register change or removal. 479.49 Section 479.49 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE DEVICES...

27 CFR 479.49 - Failure to register change or removal.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2014-04-01 2014-04-01 false Failure to register change or removal. 479.49 Section 479.49 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE DEVICES...

30 CFR 18.34 - Motors.

Code of Federal Regulations, 2012 CFR

2012-07-01

... at the flame-arresting portion might require such machining. (4) Ball and roller bearings and oil... clearance(s) shall conform to the requirements of § 18.31. (6) Oil seals shall be removed from motors prior to submission for explosion tests. Note: Oil seals will be removed from motors prior to explosion...

30 CFR 18.34 - Motors.

Code of Federal Regulations, 2013 CFR

2013-07-01

... at the flame-arresting portion might require such machining. (4) Ball and roller bearings and oil... clearance(s) shall conform to the requirements of § 18.31. (6) Oil seals shall be removed from motors prior to submission for explosion tests. Note: Oil seals will be removed from motors prior to explosion...

30 CFR 18.34 - Motors.

Code of Federal Regulations, 2014 CFR

2014-07-01

... at the flame-arresting portion might require such machining. (4) Ball and roller bearings and oil... clearance(s) shall conform to the requirements of § 18.31. (6) Oil seals shall be removed from motors prior to submission for explosion tests. Note: Oil seals will be removed from motors prior to explosion...

27 CFR 46.166 - Dealing in tobacco products.

Code of Federal Regulations, 2010 CFR

2010-04-01

... packages, provided the products remain in the packages until removed by the customer or in the presence of the customer. Where a vending machine is used, tobacco products must similarly be vended in proper... consumption in the United States unless such articles are removed from their export packaging and repackaged...

Biomechanical effects of two different collar implant structures on stress distribution under cantilever fixed partial dentures.

PubMed

Merıç, Gökçe; Erkmen, Erkan; Kurt, Ahmet; Eser, Atilim; özden, Ahmet Utku

2011-11-01

The purpose of the study was to compare the effects of two distinct collar geometries of implants on stress distribution in the bone around the implants supporting cantilever fixed partial dentures (CFPDs) as well as in the implant-abutment complex and superstructures. The three-dimensional finite element method was selected to evaluate the stress distribution. CFPDs which was supported by microthread collar structured (MCS) and non-microthread collar structured (NMCS) implants was modeled; 300 N vertical, 150 N oblique and 60 N horizontal forces were applied to the models separately. The stress values in the bone, implant-abutment complex and superstructures were calculated. In the MCS model, higher stresses were located in the cortical bone and implant-abutment complex in the case of vertical load while decreased stresses in cortical bone and implant-abutment complex were noted within horizontal and oblique loading. In the case of vertical load, decreased stresses have been noted in cancellous bone and framework. Upon horizontal and oblique loading, a MCS model had higher stress in cancellous bone and framework than the NMCS model. Higher von Mises stresses have been noted in veneering material for NMCS models. It has been concluded that stress distribution in implant-supported CFPDs correlated with the macro design of the implant collar and the direction of applied force.

‘It was better when it was worse’: blue-collar narratives of the recent past in Belgrade

PubMed Central

Archer, Rory

2018-01-01

ABSTRACT Based on oral history research conducted among networks of blue-collar workers in Belgrade, Serbia, this article develops three interrelated arguments regarding workers’ appraisals of the recent past (1980–2014). Firstly, although the tumultuous years of late socialism and post-socialism in Serbia have been represented by scholars as a series of ruptures, I suggest that for blue-collar workers the boundaries between socialism and post-socialism and pre-conflict and wartime eras are blurry. Secondly, despite the conditions of war and economic collapse, blue-collar accounts of the 1990s in Serbia are not universally negative. Some individuals experienced upward social mobility, strongly influenced by class and gender positioning in late socialism. Female workers who had experienced hardship during the 1980s were often better equipped to navigate 1990s ‘economies of makeshift’. Thirdly, social dislocation associated with neoliberal economic reforms since 2000 disproportionally affects blue-collar workers, reshaping narratives of late socialism and the 1990s (sometimes inducing workers to overlook or downplay coercive aspects of the Milošević regime). The accounts of this diverse group of (former) workers highlight that social class, gender and generational cohort condition the rather divergent ways in which the last three decades were experienced, are remembered and continue to be reevaluated in Serbia. PMID:29308458

Comparison of risk factors for tooth loss between professional drivers and white-collar workers: an internet survey.

PubMed

Suzuki, Seitaro; Yoshino, Koichi; Takayanagi, Atsushi; Ishizuka, Yoichi; Satou, Ryouichi; Kamijo, Hideyuki; Sugihara, Naoki

2016-06-10

This cross-sectional study was conducted to examine tooth loss and associated factors among professional drivers and white-collar workers. The participants were recruited by applying screening procedures to a pool of Japanese registrants in an online database. The participants were asked to complete a self-reported questionnaire. A total of 592 professional drivers and 328 white-collar workers (male, aged 30 to 69 years) were analyzed. A multiple logistic regression analysis was performed to identify differences between professional drivers and white-collar workers. The results showed that professional drivers had fewer teeth than white-collar workers (odds ratio [OR], 1.74; 95% confidence interval [95% CI], 1.150-2.625). Moreover, a second multiple logistic regression analysis revealed that several factors were associated with the number of teeth among professional drivers: diabetes mellitus (OR, 2.68; 95% CI, 1.388-5.173), duration of brushing teeth (OR, 1.66; 95% CI, 1.066-2.572), frequency of eating breakfast (OR, 2.23; 95% CI, 1.416-3.513), frequency of eating out (OR, 1.70; 95% CI, 1.086-2.671) and smoking status (OR, 2.88; 95% CI, 1.388-5.964). These findings suggest that the lifestyles of professional drivers could be related to not only their general health status, but also tooth loss.

Design modifications of the uncemented Furlong hip stem result in minor early subsidence but do not affect further stability: a randomized controlled RSA study with 5-year follow-up.

PubMed

Weber, Erik; Sundberg, Martin; Flivik, Gunnar

2014-12-01

Even small design modifications of uncemented hip stems may alter the postoperative 3-D migration pattern. The Furlong Active is an uncemented femoral stem which, in terms of design, is based on its precursor-the well-proven Furlong HAC-but has undergone several design changes. The collar has been removed on the Active stem along with the lateral fin; it is shorter and has more rounded edges in the proximal part. We compared the migration patterns of the uncemented Furlong HAC stem and the modified Furlong Active stem in a randomized, controlled trial over 5 years using radiostereometry (RSA). 50 patients with primary osteoarthritis were randomized to receive either the HAC stem or the Active stem. The patients underwent repeated RSA examinations (postoperatively, at 3 months, and after 1, 2, and 5 years) and conventional radiography, and they also filled out hip-specific questionnaires. During the first 3 months, the collarless Active stem subsided to a greater extent than the collar-fitted HAC stem (0.99 mm vs. 0.31 mm, p=0.05). There were, however, no other differences in movement measured by RSA or in clinical outcome between the 2 stems. After 3 months, both stem types had stabilized and almost no further migration was seen. The Active stem showed no signs of unfavorable migration. Our results suggest that the osseointegration is not compromised by the new design features.

An integrated helmet and neck support (iHANS) for racing car drivers: a biomechanical feasibility study.

PubMed

Newman, James A; Withnall, Christopher; Wonnacott, Michael

2012-10-01

A new form of head and neck protection for racing car drivers is examined. The concept is one whereby the helmet portion of the system is attached, by way of a quick release clamp, to a collar-like platform which is supported on the driver's shoulders. The collar, which encircles the back and sides of the driver's neck, is held in place by way of the on-board restraint belts. The interior of the helmet portion of the assembly is large enough to provide adequate volitional head motion. The overall objective of the design is to remove the helmet from the wearer's head and thereby to mitigate the deleterious features of helmet wearing such as neck fatigue, poor ventilation and aerodynamic buffeting. Just as importantly, by transferring the weight of the helmet and all attendant reaction forces associated with inertial and impact loads to the shoulder complex (instead of to the neck), reduced head and neck injury probability should be achievable. This paper describes the concept development and the evolution of various prototype designs. Prototypes have been evaluated on track and sled tested in accordance with contemporary head neck restraint systems practice. Also discussed is a series of direct impact tests. In addition, low mass high velocity ballistic tests have been conducted and are reviewed herein. It is concluded that this new concept indeed does address most of the drawbacks of the customary helmet and that it generally can reduce the probability of head and neck injury.

Use of laterally placed vacuum drains for management of aural hematomas in five dogs.

PubMed

Pavletic, Michael M

2015-01-01

5 dogs (a Newfoundland, Golden Retriever, Shiba Inu, Staffordshire Terrier, and Vizsla) were referred for evaluation and treatment of unilateral aural hematomas within a week after their formation. Aural hematomas involved the left (3) or right (2) ears. With patients under anesthesia, the aural hematomas were approached surgically from the convex, or lateral, pinnal surface. Two small incisions were used to position a vacuum drain into the incised hematoma cavity. The drain exited at the base of the pinna and adjacent cervical skin. The free end of the drain was attached to a vacuum reservoir for 18 to 21 days. Drains and skin sutures were removed at this time along with the protective Elizabethan collar. All hematomas resolved and surgical sites healed during the minimum 6-month follow-up period. Cosmetic results were considered excellent in 4 of 5 patients. Slight wrinkling of the pinna in 1 patient resulted from asymmetric enlargement of the cartilaginous walls of the hematoma, where vacuum application resulted in a slight folding of the redundant lateral cartilage wall. The described treatment was efficient, economical, and minimally invasive and required no bandaging or wound care. Placement of the drain tubing on the convex (lateral) aspect sheltered the system from displacement by patients with an Elizabethan collar in place. Overall cosmetic results were excellent; asymmetric enlargement of the cartilaginous walls of the hematoma with slight folding of the pinna was seen in 1 patient.

Are flexion extension films necessary for cervical spine clearance in patients with neck pain after negative cervical CT scan?

PubMed

Tran, Baotram; Saxe, Jonathan M; Ekeh, Akpofure Peter

2013-09-01

There are variations in cervical spine (CS) clearance protocols in neurologically intact blunt trauma patients with negative radiological imaging but persistent neck pain. Current guidelines from the current Eastern Association for the Surgery of Trauma include options of maintaining the cervical collar or obtaining either magnetic resonance imaging (MRI) or flexion-extension films (FEF). We evaluated the utility of FEF in the current era of routine computerized tomography (CT) for imaging the CS in trauma. All neurologically intact, awake, nonintoxicated patients who underwent FEF for persistent neck pain after negative CT scan of the CS at our level I trauma center over a 13-mo period were identified. Their charts were reviewed and demographic data obtained. There were 354 patients (58.5% male) with negative cervical CS CT scans who had FEF for residual neck pain. Incidental degenerative changes were seen in 37%--which did not affect their acute management. FEF were positive for possible ligamentous injury in 5 patients (1.4%). Two of these patients had negative magnetic resonance images and the other three had collars removed within 3 wk as the findings were ultimately determined to be degenerative. In the current era, where cervical CT has universally supplanted initial plain films, FEF appear to be of little value in the evaluation of persistent neck pain. Their use should be excluded from cervical spine clearance protocols in neurologically intact, awake patients. Copyright © 2013 Elsevier Inc. All rights reserved.

Work Identity and Marital Adjustment in Blue-Collar Men.

ERIC Educational Resources Information Center

Gaesser, David L.; Whitbourne, Susan Krauss

1985-01-01

Investigated the relationship between work-identity and satisfaction and marital adjustment in 40 married male blue-collar workers, ages 25 to 41 years. Satisfaction with extrinsic work factors related to marital adjustment, while satisfaction with intrinsic work factors negatively related to secondary role salience. Age negatively related to…

30 CFR 77.1914 - Electrical equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electrical equipment. 77.1914 Section 77.1914... Shaft Sinking § 77.1914 Electrical equipment. (a) Electric equipment employed below the collar of a.... (b) The insulation of all electric conductors employed below the collar of any slope or shaft during...

30 CFR 77.1914 - Electrical equipment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Electrical equipment. 77.1914 Section 77.1914... Shaft Sinking § 77.1914 Electrical equipment. (a) Electric equipment employed below the collar of a.... (b) The insulation of all electric conductors employed below the collar of any slope or shaft during...

30 CFR 77.1914 - Electrical equipment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Electrical equipment. 77.1914 Section 77.1914... Shaft Sinking § 77.1914 Electrical equipment. (a) Electric equipment employed below the collar of a.... (b) The insulation of all electric conductors employed below the collar of any slope or shaft during...

30 CFR 77.1914 - Electrical equipment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Electrical equipment. 77.1914 Section 77.1914... Shaft Sinking § 77.1914 Electrical equipment. (a) Electric equipment employed below the collar of a.... (b) The insulation of all electric conductors employed below the collar of any slope or shaft during...

30 CFR 77.1914 - Electrical equipment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Electrical equipment. 77.1914 Section 77.1914... Shaft Sinking § 77.1914 Electrical equipment. (a) Electric equipment employed below the collar of a.... (b) The insulation of all electric conductors employed below the collar of any slope or shaft during...

Inspection tool for butt-welded tubing

NASA Technical Reports Server (NTRS)

Horman, D. P.

1977-01-01

Inspection tool for tubing consists of metal casing housing elastic collar. Collar is clamped around weld site under test. Leakage through weld is contained within chamber and is bled to detector via tubing attached to fitting. Tool, originally designed to detect fluid leakage in tubing, can be used to detect gas leaks.

78 FR 23592 - Certain Electronic Bark Control Collars, Termination of the Investigation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-19

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-870] Certain Electronic Bark Control... investigation may be viewed on the Commission's electronic docket (EDIS) at at http://www.usitc.gov . Hearing..., and the sale within the United States after importation of certain electronic bark control collars by...

The Effect of Unemployment on the College Student's Academic Performance.

ERIC Educational Resources Information Center

Ma, Li-Chen; Wooster, Robert A.

1979-01-01

Data from this study indicate employment status and type of employment exert influence on students' grade point averages. Students working less than 15 hours per week achieve higher grades than those working over 15 hours. Among employed students, white collar employees achieve better grades than blue collar employees. (Author)

Influence of electrical resistivity and machining parameters on electrical discharge machining performance of engineering ceramics.

PubMed

Ji, Renjie; Liu, Yonghong; Diao, Ruiqiang; Xu, Chenchen; Li, Xiaopeng; Cai, Baoping; Zhang, Yanzhen

2014-01-01

Engineering ceramics have been widely used in modern industry for their excellent physical and mechanical properties, and they are difficult to machine owing to their high hardness and brittleness. Electrical discharge machining (EDM) is the appropriate process for machining engineering ceramics provided they are electrically conducting. However, the electrical resistivity of the popular engineering ceramics is higher, and there has been no research on the relationship between the EDM parameters and the electrical resistivity of the engineering ceramics. This paper investigates the effects of the electrical resistivity and EDM parameters such as tool polarity, pulse interval, and electrode material, on the ZnO/Al2O3 ceramic's EDM performance, in terms of the material removal rate (MRR), electrode wear ratio (EWR), and surface roughness (SR). The results show that the electrical resistivity and the EDM parameters have the great influence on the EDM performance. The ZnO/Al2O3 ceramic with the electrical resistivity up to 3410 Ω·cm can be effectively machined by EDM with the copper electrode, the negative tool polarity, and the shorter pulse interval. Under most machining conditions, the MRR increases, and the SR decreases with the decrease of electrical resistivity. Moreover, the tool polarity, and pulse interval affect the EWR, respectively, and the electrical resistivity and electrode material have a combined effect on the EWR. Furthermore, the EDM performance of ZnO/Al2O3 ceramic with the electrical resistivity higher than 687 Ω·cm is obviously different from that with the electrical resistivity lower than 687 Ω·cm, when the electrode material changes. The microstructure character analysis of the machined ZnO/Al2O3 ceramic surface shows that the ZnO/Al2O3 ceramic is removed by melting, evaporation and thermal spalling, and the material from the working fluid and the graphite electrode can transfer to the workpiece surface during electrical discharge machining ZnO/Al2O3 ceramic.

Machine Learning Techniques in Clinical Vision Sciences.

PubMed

Caixinha, Miguel; Nunes, Sandrina

2017-01-01

This review presents and discusses the contribution of machine learning techniques for diagnosis and disease monitoring in the context of clinical vision science. Many ocular diseases leading to blindness can be halted or delayed when detected and treated at its earliest stages. With the recent developments in diagnostic devices, imaging and genomics, new sources of data for early disease detection and patients' management are now available. Machine learning techniques emerged in the biomedical sciences as clinical decision-support techniques to improve sensitivity and specificity of disease detection and monitoring, increasing objectively the clinical decision-making process. This manuscript presents a review in multimodal ocular disease diagnosis and monitoring based on machine learning approaches. In the first section, the technical issues related to the different machine learning approaches will be present. Machine learning techniques are used to automatically recognize complex patterns in a given dataset. These techniques allows creating homogeneous groups (unsupervised learning), or creating a classifier predicting group membership of new cases (supervised learning), when a group label is available for each case. To ensure a good performance of the machine learning techniques in a given dataset, all possible sources of bias should be removed or minimized. For that, the representativeness of the input dataset for the true population should be confirmed, the noise should be removed, the missing data should be treated and the data dimensionally (i.e., the number of parameters/features and the number of cases in the dataset) should be adjusted. The application of machine learning techniques in ocular disease diagnosis and monitoring will be presented and discussed in the second section of this manuscript. To show the clinical benefits of machine learning in clinical vision sciences, several examples will be presented in glaucoma, age-related macular degeneration, and diabetic retinopathy, these ocular pathologies being the major causes of irreversible visual impairment.

Effect of surface anodization on stability of orthodontic microimplant

PubMed Central

Karmarker, Sanket; Yu, Wonjae

2012-01-01

Objective To determine the effect of surface anodization on the interfacial strength between an orthodontic microimplant (MI) and the rabbit tibial bone, particularly in the initial phase after placement. Methods A total of 36 MIs were driven into the tibias of 3 mature rabbits by using the self-drilling method and then removed after 6 weeks. Half the MIs were as-machined (n = 18; machined group), while the remaining had anodized surfaces (n = 18; anodized group). The peak insertion torque (PIT) and the peak removal torque (PRT) values were measured for the 2 groups of MIs. These values were then used to calculate the interfacial shear strength between the MI and cortical bone. Results There were no statistical differences in terms of PIT between the 2 groups. However, mean PRT was significantly greater for the anodized implants (3.79 ± 1.39 Ncm) than for the machined ones (2.05 ± 1.07 Ncm) (p < 0.01). The interfacial strengths, converted from PRT, were calculated at 10.6 MPa and 5.74 MPa for the anodized and machined group implants, respectively. Conclusions Anodization of orthodontic MIs may enhance their early-phase retention capability, thereby ensuring a more reliable source of absolute anchorage. PMID:23112925

A note on the hygiene of meat mincing machines

PubMed Central

Dempster, J. F.

1973-01-01

Two mincing machines were cleaned by different methods, i.e. (a) a detergent/sterilizer method and (b) scrubbing parts in boiling (98·8° C.) water. Initial results indicated that, on reassembly, post-treatment contamination took place. Efforts to clean each machine as consisting of two distinct parts, (a) the casing and (b) removable parts, were more satisfactory. Four other mincers which could be completely dis-assembled were satisfactorily cleaned, but only in terms of percentage organisms surviving and not in terms of actual numbers surviving. PMID:4520512

Documentation for the machine-readable version of the Survey of the Astrographic Catalogue From 1 to 31 Degrees of Northern Declination (Fresneau 1983)

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1983-01-01

A description of the machine readable catalog, including detailed format and tape file characteristics, is given. The machine file is a computation of mean values for position and magnitude at a mean epoch of observation for each unique star in the Oxford, Paris, Bordeaux, Toulouse and Northern Hemisphere Algiers zone. The format was changed to effect more efficient data searching by position and additional duplicate entries were removed. The final catalog contains data for 997311 stars.

The Effect of Employment Status Change on Self-Attitudes

ERIC Educational Resources Information Center

Cohn, Richard M.

1978-01-01

Differences in self-satisfaction between the employed and the newly unemployed vary according to: (1) amount of concomitant change in social, family, and economic role; (2) relative importance of the status change among subgroups (male vs. female, white collar vs. blue collar); and (3) individual's attribution of cause for the status change (own…

75 FR 41914 - Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-19

... consolidated last sale price by the same specified percentage. The numerical percentage proposed to be used in the Trading Collar price calculations will be equal to the appropriate ``numerical guideline... Collars will automatically be adjusted to match any future changes in the numerical guidelines in NYSE...

The Educational Infrastructure in Rural Areas.

ERIC Educational Resources Information Center

Safra, Martine

The rural areas in the world are experiencing an identity crisis: for example, in France some areas are losing population, while those that are growing find that the population is changing from agricultural workers to retired persons and blue-collar and white-collar employees. This report, which summarizes discussion at a recent Organisation for…

Socializing Messages in Blue-Collar Families: Communicative Pathways to Social Mobility and Reproduction

ERIC Educational Resources Information Center

Lucas, Kristen

2011-01-01

This study explicitly links processes of anticipatory socialization to social mobility and reproduction. An examination of the socializing messages exchanged between blue-collar parents (n = 41) and their children (n = 25) demonstrate that family-based messages about work and career seldom occur in straightforward, unambiguous ways. Instead,…

Evaluating elk habitat interactions with GPS collars

Treesearch

Mark A. Rumble; Lakhdar Benkobi; Fredrick Lindzey; R. Scott Gamo

2001-01-01

Global positioning systems (GPS) are likely to revolutionize animal telemetry studies. GPS collars allow biologists to collect systematically scheduled data when VHF telemetry data is difficult or impossible to collect. Past studies have shown that the success of GPS telemetry is greater when animals are standing, or in open habitats. To make effective use of GPS...

Sex and Class Differences in Parent-Child Interaction: A Test of Kohn's Hypothesis

ERIC Educational Resources Information Center

Gecas, Viktor; Nye, F. Ivan

1974-01-01

This paper focuses on Melvin Kohn's suggestive hypothesis that white-collar parents stress the development of internal standards of conduct in their children while blue-collar parents are more likely to react on the basis of the consequences of the child's behavior. This hypothesis was supported. (Author)

The Latent Factor--An Impetus for Employer Provided Education.

ERIC Educational Resources Information Center

Fusch, Gene E.

A new phenomenon is emerging: companies are diverging from human capital theory by providing employees a general education in addition to specific training at the workplace. Blue collar workers often do not pursue higher education due to perceived lack of opportunities. If an employer provides educational opportunities, blue collar workers may…

Frogmen on Apollo command module boilerplate flotation collar during recovery

NASA Image and Video Library

1966-02-22

Apollo command module boilerplate floats in the Atlantic Ocean during a practice recovery exercise. Frogmen in a liferaft and on the flotation collar secure the command module boilerplate for hoisting onto a nearby recovery ship. The exercise was conducted in preparation for the forthcoming Apollo-Saturn 201 (AS-201) mission.

Filter holder assembly having extended collar spacer ring

DOEpatents

Alvin, Mary Anne; Bruck, Gerald J.

2002-01-01

A filter holder assembly is provided that utilizes a fail-safe regenerator unit with an annular spacer ring having an extended metal collar for containment and positioning of a compliant ceramic gasket used in the assembly. The filter holder assembly is disclosed for use with advanced composite, filament wound, and metal candle filters.

Causes and consequences of timing errors associated with global positioning system collar accelerometer activity monitors

Treesearch

Adam J. Gaylord; Dana M. Sanchez

2014-01-01

Direct behavioral observations of multiple free-ranging animals over long periods of time and large geographic areas is prohibitively difficult. However, recent improvements in technology, such as Global Positioning System (GPS) collars equipped with motion-sensitive activity monitors, create the potential to remotely monitor animal behavior. Accelerometer-equipped...

How Blue-Collar Workers on 4-Day Workweeks Use Their Time

ERIC Educational Resources Information Center

Maklan, David Mark

1977-01-01

Describes a study of the behavior of male blue-collar workers on 4-day workweeks, revealing that they participate in the same activities as similar 5-day workers. Discussion focuses on the impact of the 4-day week on use of time and on the individual's satisfaction with leisure activities. (TA)

Collar crack of birch

Treesearch

Alex L. Shigo

1964-01-01

The name "Collar crack" is suggested for a condition of birches observed in the past 4 years during field studies of forest disease problems in the White Mountains of New Hampshire. The first close observations of this condition were made during the summer of 1963. This is a report on those observations and an explanation of the possible cause.

Gender Differences in Coping with Involuntary White Collar Job Loss.

ERIC Educational Resources Information Center

Eby, Lillian T.; Buch, Kimberly

Corporate restructuring has resulted in involuntary job loss for a significant number of white collar workers. This study investigated gender differences in reaction to involuntary job loss and tested a model of career gorwth through job loss. Former clients, 456 males and 62 females, of a nationwide outplacement firm completed a questionnaire…

Facilitating Women's Occupational Integration. Background Paper No. 26.

ERIC Educational Resources Information Center

Figart, Deborah M.; Bergmann, Barbara R.

Occupational sex segregation is one of the most obvious facts of economic life. The largest declines in the sex segregation index between 1970 and 1980 were in the managerial and professional specialty and in the service occupations. Changes were greater for white-collar than blue-collar occupations for both white and minority women. White women…

Fluid lubricated bearing assembly

DOEpatents

Boorse, Henry A.; Boeker, Gilbert F.; Menke, John R.

1976-01-01

1. A support for a loaded rotatable shaft comprising in combination on a housing having a fluid-tight cavity encasing an end portion of said shaft, a thrust bearing near the open end of said cavity for supporting the axial thrust of said shaft, said thrust bearing comprising a thrust plate mounted in said housing and a thrust collar mounted on said shaft, said thrust plate having a central opening the peripheral portion of which is hermetically sealed to said housing at the open end of said cavity, and means for supplying a fluid lubricant to said thrust bearing, said thrust bearing having a lubricant-conducting path connecting said lubricant supplying means with the space between said thrust plate and collar intermediate the peripheries thereof, the surfaces of said plate and collar being constructed and arranged to inhibit radial flow of lubricant and, on rotation of said thrust collar, to draw lubricant through said path between the bearing surfaces and to increase the pressure therebetween and in said cavity and thereby exert a supporting force on said end portion of said shaft.

[Maternity leave and possible effects of working during pregnancy in 160 women].

PubMed

Valentino, M; Rapisarda, V; Ciuccarelli, M; Tranquilli, A L

2005-01-01

Three years from the approval of the law safeguarding pregnant workers and the foetus (D.Lgs. 151/01), awareness of these provisions and management of pregnancy in relation to their job were assessed in 160 pregnant workers using a questionnaire. Respondents were 147 subjects, mean age 29.4 +/- 4.6 years, employed as blue-collar workers (n=26); white-collar workers (n =47); health workers (n=16); school workers (n=14); workers in shops (n=6); policewomen (n =3) housewives (n=25). Moreprovisions and most of them took advantage of maternal leave. Pre-term birth (16%) and low birth weight (9%) were the mostfrequent events. There were no neonatal diseases. Blue-collar, white-collar work and work in the home were not associated with pre-term births or low birth weight. Analysis based on the fathers' job characteristics did not yield significant associations either. Although the small size of our sample does not allow to draw firm conclusions, it is interesting to note that more than 10% of respondents were not aware of the provisions protecting workers' pregnancy.

Modeling hydrodynamic effects on choanoflagellate feeding

NASA Astrophysics Data System (ADS)

Oakes, Christian; Hguyen, Hoa; Koehl, Mimi; Fauci, Lisa

2017-11-01

Choanoflagellates are unicellular organisms whose intriguing morphology includes a set of collars/microvilli emanating from the cell body, surrounding the beating flagellum. As the closest living relative to animals, they are important for both ecological and evolutionary studies. Choanoflagellates have three unicellular types: slow swimmers, fast swimmers, and thecate (attached to a surface by a stalk). Each has different morphology and feeding rate. We use the method of regularized Stokeslets to simulate cell-fluid interactions of each type and show the hydrodynamic effects on the amount and directions of fluid flow toward the collar. After validating the swimming speeds of our models with experimental data, we calculate the rate of flow across a capture zone around the collar (flux). This sheds light on how each morphological aspect of the cell aids in bacteria capture during feeding. Among the three types, the thecate cells have the largest average flux values, implying that they take advantage of the nearby surface by creating eddies that draw bacteria into their collar for ingestion. Funding Source: FASTER Grant SURF `` National Science Foundation DUE S-STEM Award 1153796, Mach Fellowship.

Evaluation of 3 radio transmitters and collar designs for Amazona

USGS Publications Warehouse

Meyers, J.M.

1996-01-01

I evaluated 3 radio transmitter attachments and designs for adult parrots. Two of the transmitters and attachments were similar to those used previously in the study on fledgling and adult parrots. I designed, in collaboration with the manufacturer, a third transmitter and attachment that provided protection of key areas from chewing and eventual destruction of the attachment or transmitter. This design was used successfully to radio-track parrots an average of 43.4 weeks (range = 35.9-51.6 weeks). It was the only transmitter of the 3 tested to operate without failure (>36 weeks) caused by chewing damage to the transmitter, antenna, collar, or attachment mechanism (Fisher's exact test, 3 df, P = 0.0003). Its adjustable collar, made from 59 kg-test stainless steel wire covered with plastic heat-shrink tubing, was sturdy and easy to apply. Transmitters for parrots should be enclosed in a protective metal case (brass) and have metal crimped tubes (brass or copper) protecting key areas, such as the base of the antenna and mechanism for attachment of the collar.

Seating arrangement and structure of a spool within a well casing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lien, N.C.; Olsen, D.G.

1990-07-10

This patent describes a well construction having a vertical well casing and a spool. It comprises: the spool being insertable into the well casing and the spool having a flange with a skirt that bottoms against a collar in the well casing to form a seated contact engagement between the skirt and the collar, a support web connected to the flange and extending substantially perpendicular to the skirt. The support web has an undersurface which extends upwardly and radially inwardly from the flange,a sleeve section connected to the web radially inwardly thereof from which a pipe section is suspended therefrom,more » and a ring portion at a junction of the support web and the sleeve about which transmitted forces are resolved, the skirt and the collar being angled at an angle {theta} relative to the vertical such that {theta} has a value less than tan {theta} equal to 1/{mu} and greater than tan {theta} equal to {mu} where {mu} equals the coefficient of static friction between the skirt and the collar.« less

Specification of a new de-stoner machine: evaluation of machining effects on olive paste's rheology and olive oil yield and quality.

PubMed

Romaniello, Roberto; Leone, Alessandro; Tamborrino, Antonia

2017-01-01

An industrial prototype of a partial de-stoner machine was specified, built and implemented in an industrial olive oil extraction plant. The partial de-stoner machine was compared to the traditional mechanical crusher to assess its quantitative and qualitative performance. The extraction efficiency of the olive oil extraction plant, olive oil quality, sensory evaluation and rheological aspects were investigated. The results indicate that by using the partial de-stoner machine the extraction plant did not show statistical differences with respect to the traditional mechanical crushing. Moreover, the partial de-stoner machine allowed recovery of 60% of olive pits and the oils obtained were characterised by more marked green fruitiness, flavour and aroma than the oils produced using the traditional processing systems. The partial de-stoner machine removes the limitations of the traditional total de-stoner machine, opening new frontiers for the recovery of pits to be used as biomass. Moreover, the partial de-stoner machine permitted a significant reduction in the viscosity of the olive paste. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Machining of Fibre Reinforced Plastic Composite Materials.

PubMed

Caggiano, Alessandra

2018-03-18

Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and machining conditions is therefore required, taking into account that the phenomena responsible for material removal in cutting of fibre reinforced plastic composite materials are fundamentally different from those of conventional metals and their alloys. To date, composite materials are increasingly used in several manufacturing sectors, such as the aerospace and automotive industry, and several research efforts have been spent to improve their machining processes. In the present review, the key issues that are concerning the machining of fibre reinforced plastic composite materials are discussed with reference to the main recent research works in the field, while considering both conventional and unconventional machining processes and reporting the more recent research achievements. For the different machining processes, the main results characterizing the recent research works and the trends for process developments are presented.

Machining of Fibre Reinforced Plastic Composite Materials

PubMed Central

2018-01-01

Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and machining conditions is therefore required, taking into account that the phenomena responsible for material removal in cutting of fibre reinforced plastic composite materials are fundamentally different from those of conventional metals and their alloys. To date, composite materials are increasingly used in several manufacturing sectors, such as the aerospace and automotive industry, and several research efforts have been spent to improve their machining processes. In the present review, the key issues that are concerning the machining of fibre reinforced plastic composite materials are discussed with reference to the main recent research works in the field, while considering both conventional and unconventional machining processes and reporting the more recent research achievements. For the different machining processes, the main results characterizing the recent research works and the trends for process developments are presented. PMID:29562635

Age-specific survival of tundra swans on the lower Alaska Peninsula

USGS Publications Warehouse

Meixell, Brandt W.; Lindberg, Mark S.; Conn, Paul B.; Dau, Christian P.; Sarvis, John E.; Sowl, Kristine M.

2013-01-01

The population of Tundra Swans (Cygnus columbianus columbianus) breeding on the lower Alaska Peninsula represents the southern extremity of the species' range and is uniquely nonmigratory. We used data on recaptures, resightings, and recoveries of neck-collared Tundra Swans on the lower Alaska Peninsula to estimate collar loss, annual apparent survival, and other demographic parameters for the years 1978–1989. Annual collar loss was greater for adult males fitted with either the thinner collar type (0.34) or the thicker collar type (0.15) than for other age/sex classes (thinner: 0.10, thicker: 0.04). The apparent mean probability of survival of adults (0.61) was higher than that of immatures (0.41) and for both age classes varied considerably by year (adult range: 0.44–0.95, immature range: 0.25–0.90). To assess effects of permanent emigration by age and breeding class, we analyzed post hoc the encounter histories of swans known to breed in our study area. The apparent mean survival of known breeders (0.65) was generally higher than that of the entire marked sample but still varied considerably by year (range 0.26–1.00) and indicated that permanent emigration of breeding swans was likely. We suggest that reductions in apparent survival probability were influenced primarily by high and variable rates of permanent emigration and that immigration by swans from elsewhere may be important in sustaining a breeding population at and near Izembek National Wildlife Refuge.

Is prolonged sitting at work associated with the time course of neck–shoulder pain? A prospective study in Danish blue-collar workers

PubMed Central

Gupta, Nidhi; Heiden, Marina; Mathiassen, Svend Erik; Korshøj, Mette; Jørgensen, Marie Birk; Holtermann, Andreas

2016-01-01

Objectives This study aimed to determine the extent to which objectively measured sitting time at work is associated with the course of neck–shoulder pain across 1 year in blue-collar workers. Methods Data were analysed from 625 blue-collar workers in the Danish PHysical ACTivity cohort with Objective measurements (DPHACTO) cohort study (2012–2013). Objective data on sitting time were collected at baseline using accelerometry. Self-reported pain intensity (numeric rating scale 0–10) in the neck–shoulder region was registered for 1 year using repeated text messages (14 in total). Linear mixed models were used to determine the relationship between per cent time in sitting at work and trajectories of neck–shoulder pain, with and without adjustment for demographic, occupational and lifestyle factors, and baseline pain intensity. Results More sitting time at work was associated with a faster decline in pain intensity over 12 months, as indicated by a statistically significant effect of sitting on pain trajectories in the crude (p=0.020) and fully adjusted models (p=0.027). Conclusions In blue-collar workers, more sitting time at work was associated with a favourable development of pain intensity over time. The relationship between sitting at work and pain needs further investigation before explicit recommendations and guidelines on sedentary behaviour among blue-collar workers can be developed. PMID:28186937

Hematocrit and plasma chemistry values in adult collared scops owls (Otus lettia) and crested serpent eagles (Spilornis cheela hoya).

PubMed

Chan, Fang-Tse; Lin, Pei-I; Chang, Geng-Ruei; Wang, Hsien-Chi; Hsu, Tien-Huan

2012-07-01

In this study, we report hematocrit and plasma chemistry values for adult captive collared scops owls (Otus lettia) and crested serpent eagles (Spilornis cheela hoya). In particular, we address the gender-specific differences within these values. We measured hematocrit (HCT) and plasma chemistry values for uric acid (UA), plasma urea nitrogen (BUN), total protein (TP), albumin (ALB), glucose (GLU), cholesterol (CHO), triglyceride (TG), aspartate aminotransferase (AST), alanine aminotransferase (ALT), lactate dehydrogenase (LDH), alkaline phosphatase (ALP), total bilirubin (TBIL), creatine (CRE), creatine phosphokinase (CPK), amylase (AMY), calcium (CA), ionic phosphorous (IP) and sodium (NA), potassium (K) and chloride ions (CL) in 37 adult captive collared scops owls and 39 adult captive crested serpent eagles. Significant differences between the sexes were found for UA, GLU and CPK in the collared scope owls. UA and GLU concentrations were significantly higher (P<0.01 and P<0.05) among males than females, while the CPK concentration was significantly lower (P<0.05) in males. There were no significant differences in of all of the measured parameters between male and female eagles. These finding suggested that HCT and plasma chemistry values of raptors vary individually according to species and sex. Our results provide the 1st available reference data for ranges of plasma values in adult captive collared scops owls and crested serpent eagles, making them a potentially useful complementary diagnostic tool for veterinary care of individuals for both species in captivity.

Comparison of the laryngeal view during intubation using Airtraq and Macintosh laryngoscopes in patients with cervical spine immobilization and mouth opening limitation.

PubMed

Koh, Jae-Chul; Lee, Jong Seok; Lee, Youn-Woo; Chang, Chul Ho

2010-11-01

For patients suspicious of cervical spine injury, a Philadelphia cervical collar is usually applied. Application of Philadelphia cervical collar may cause difficult airway. The aim of this study was to evaluate the laryngeal view and the success rate at first intubation attempt of the Airtraq and conventional laryngoscopy in patients with simulated cervical spine injury after application of a Philadelphia cervical collar. Anesthesia was induced with propofol, remifentanil, and rocuronium. After a Philadelphia cervical collar applied, patients were randomly assigned to tracheal intubation with an Airtraq (Group A, n = 25) or with conventional laryngoscopy (Group L, n = 25). Measurements included intubation time, success rate of first intubation attempt, number of intubation attempts, and percentage of glottic opening (POGO) score. Mean blood pressure and heart rate were also recorded at baseline, just before and after intubation. The success rate of the first attempt in Group A (96%) was significantly greater than with the Group L (40%). POGO score was significantly greater in Group A (84 ± 20%) than in Group L (6 ± 11%). The duration of successful intubation at first tracheal intubation attempt and hemodynamic changes were not significantly different between the two groups. The Airtraq offers a better laryngeal view and higher success rate at first intubation attempt in patients who are applied with a Philadelphia cervical collar due to suspicion of cervical spine injury.

Stability and Control Characteristics of a 1/10-Scale Model of the McDonnell XP-85 Airplane While Attached to the Trapeze

NASA Technical Reports Server (NTRS)

Johnson, Joseph L.

1947-01-01

At the request of the Air Materiel Command, Army Air Forces, an investigation of the low-speed, power-off, stability and control characteristics of the McDonnell XP-85 airplane has been conducted in the Langley free-flight tunnel. The results of the portion of the investigation consisting of tests of a 1/10-scale model to study the stability of the XP-85 when attached to the trapeze and during retraction into the B-36 bomb bay are presented herein. In the power-off condition the stability was satisfactory with all oscillations well damped and the nose-restraining collar could be placed in position without difficulty. In a simulated power-on condition the model had a constant-amplitude rolling and sidewise motion and when the collar was layered, a violent motion resulted if the collar struck the model but failed to hold it in the proper manner. Folding of the wings and retraction into the bomb bay offered no problem once the airplane was properly held by the collar. It is recommended that the power be cut immediately after hooking on and that a restricting mechanism be incorporated in the center of the trapeze to eliminate the sidewise motion. It also appears desirable to have the retracting procedure controlled by the XP-85 pilot or an observer in the mother ship to insure that the parasite is in proper position after hooking up before bringing the collar down.

Parameter optimization of electrochemical machining process using black hole algorithm

NASA Astrophysics Data System (ADS)

Singh, Dinesh; Shukla, Rajkamal

2017-12-01

Advanced machining processes are significant as higher accuracy in machined component is required in the manufacturing industries. Parameter optimization of machining processes gives optimum control to achieve the desired goals. In this paper, electrochemical machining (ECM) process is considered to evaluate the performance of the considered process using black hole algorithm (BHA). BHA considers the fundamental idea of a black hole theory and it has less operating parameters to tune. The two performance parameters, material removal rate (MRR) and overcut (OC) are considered separately to get optimum machining parameter settings using BHA. The variations of process parameters with respect to the performance parameters are reported for better and effective understanding of the considered process using single objective at a time. The results obtained using BHA are found better while compared with results of other metaheuristic algorithms, such as, genetic algorithm (GA), artificial bee colony (ABC) and bio-geography based optimization (BBO) attempted by previous researchers.

Radio-tracking large wilderness mammals: integration of GPS and Argos technologies

USGS Publications Warehouse

Schwartz, Charles C.; Arthur, Steve M.

1999-01-01

We tested 30 prototype global positioning system (GPS) radiocollars on brown bears (Ursus arctos) over a 3-year period on the Kenai Peninsula, Alaska. Collars were of 2 design types: GPS units with an Argos (Argos Data collection and Location System) satellite uplink (n = 19) and GPS units where the data were stored on board (n = 10) for retrieval at a later date. All units also contained a conventional VHF (very high frequency) transmitter and weighed 1.7 kg. GPS-Argos units obtained 10-82% of expected GPS fixes, and fix rate declined significantly (P < 0.05) with time after deployment. Argos uplink success (proportion of successful transmissions of stored data) was linearly related to GPS fix rate (r = 0.91, P < 0.001). Storeon-board units obtained significantly more successful fixes when compared with the GPS-Argos units (t = -4.009, P < 0.001). Fix success rate for deployed store-on-board collars ranged from 13-96%; because of the increased number of attempted fixes per day, these collars obtained fixes on 97% of days deployed. Accuracy of the GPS units was less than predicted by the NAVSTAR GPS technology using the course acquisition code. Reduced accuracy was likely a result of the proportion of 2-dimensional versus 3-dimensional fixes obtained, although we could not determine this statistic from recorded data. Increased overstory closure was the only variable measured that partially explained the reduced likelihood of a successful fix. Stem density, stem diameter, and overstory height measured within 3 m of the collar did not affect fix success. GPS fix success rates for collars attached to bears varied more and were lower than fix rates for stationary collars placed in various vegetation types, suggesting that the bear, terrain, and movement all influence both fix and uplink success rate. Application of this new technology to grizzly and brown bear research and comparisons to studies with moose (Alces alces) are discussed.

Protecting cows in small holder farms in East Africa from tsetse flies by mimicking the odor profile of a non-host bovid

PubMed Central

Orindi, Benedict O.; Mbahin, Norber; Muasa, Peter N.; Mbuvi, David M.; Muya, Caroline M.; Pickett, John A.; Borgemeister, Christian W.

2017-01-01

Background For the first time, differential attraction of pathogen vectors to vertebrate animals is investigated for novel repellents which when applied to preferred host animals turn them into non-hosts thereby providing a new paradigm for innovative vector control. For effectively controlling tsetse flies (Glossina spp.), vectors of African trypanosomosis, causing nagana, repellents more powerful than plant derived, from a non-host animal the waterbuck, Kobus ellipsiprymnus defassa, have recently been identified. Here we investigate these repellents in the field to protect cattle from nagana by making cattle as unattractive as the buck. Methodology/Principal findings To dispense the waterbuck repellents comprising guaiacol, geranylacetone, pentanoic acid and δ-octalactone, (patent application) we developed an innovative collar-mounted release system for individual cattle. We tested protecting cattle, under natural tsetse challenge, from tsetse transmitted nagana in a large field trial comprising 1,100 cattle with repellent collars in Kenya for 24 months. The collars provided substantial protection to livestock from trypanosome infection by reducing disease levels >80%. Protected cattle were healthier, showed significantly reduced disease levels, higher packed cell volume and significantly increased weight. Collars >60% reduced trypanocide use, 72.7% increase in ownership of oxen per household and enhanced traction power (protected animals ploughed 66% more land than unprotected). Land under cultivation increased by 73.4%. Increase in traction power of protected animals reduced by 69.1% acres tilled by hand per household per ploughing season. Improved food security and household income from very high acceptance of collars (99%) motivated the farmers to form a registered community based organization promoting collars for integrated tsetse control and their commercialization. Conclusion/Significance Clear demonstration that repellents from un-preferred hosts prevent contact between host and vector, thereby preventing disease transmission: a new paradigm for vector control. Evidence that deploying water buck repellents converts cattle into non-hosts for tsetse flies—‘cows in waterbuck clothing’. PMID:29040267

Radiotracking large wilderness mammals: Integration of GPS and Argos technology

USGS Publications Warehouse

Schwartz, Charles C.; Arthur, Steve M.

1999-01-01

We tested 30 prototype global positioning system (GPS) radiocollars on brown bears (Ursus arctos) over a 3-year period on the Kenai Peninsula, Alaska. Collars were of 2 design types: GPS with an Argos (Argos Data collection and Location System) satellite uplink (n=19) and GPS unites where the data were stored on board (n=10) for retrieval at a later date. All units also contained a conventional VHF (very high frequency) transmitter and weighed 1.7 kg. GPS-Argos united obtained 10-82% of expected GPS fixes, and fix rate declined significantly (P<0.05) with time after deployment. Argos uplink success (proportion of successful transmissions of stored data) was linearly related to GPS fix rate (r=0.91, P<0.001). Store-on-board units obtained significantly more successful fixes when compared with the GPS-Argos units (t=-4.009, P<0.001). Fix success rate for deployed store-on-board collars ranged from 13-96%; because of the increased number of attempted fixes per day, these collars obtained fixes on 97% of days deployed. Accuracy of the GPS units was less than predicted by the NAVSTAR GPS technology using the course acquisition code. Reduced accuracy was likely a result of the proportion of 2-dimensional versus 3-dimensional fixes obtained, although we could not determine this statistic from recorded data. Increased overstory closure was the only variable measured that partially explained the reduced likelihood of a successful fix. Stem density, stem diameter, and overstory height measured within 3 m of the collar did not affect fix success. GPS fix success rates for collars attached to bears varied more and were lower than fix rates for stationary collars placed in various vegetation types, suggesting that the bear, terrain, and movement all influence both fix and uplink success rate. Application of this new technology to grizzly and brown bear research and comparisons to studies with moose (Alces alces) are discussed.

Agricultural workers in a cohort of middle-aged Japanese women showed better health status than did women with other occupations.

PubMed

Iijima, Hisaka; Suzuki, Shosuke; Koyama, Hiroshi; Nakazawa, Minato; Wakimoto, Yuji

2018-05-01

Objective: This study investigated the relationship between occupations and health status to obtain an overall understanding of a cohort of Japanese middle-aged women, including unemployed women, who comprised approximately 30% of the sample. Participants and Methods: Participants of this study were 4,454 women aged 40-69 years, classified into the following five groups based on their occupation: unemployed, 1,432; agriculture, 439; self-employed, 1,596; white collared, 793; and blue collared, 194. Participants' perceived health was assessed using a symptoms checklist called the Todai Health Index (THI, later renamed as the Total Health Index) in a baseline survey conducted in 1993. The mortality risk of the participants was assessed using the Cox's Proportional Hazards Model. Results: The means of the percentile values on the Total Scale 1 in the THI were as follows: agriculture, 43.7; unemployed, 50.8; self-employed, 52.5; white collared, 53.0; and blue collared, 56.1, with lower percentile values indicating better perceived health. The results showed that women engaged in agriculture were in significantly better health than were those in the other four occupations. The hazard ratios (HRs) and 95% confidence intervals of the occupational groups adjusted for age, area of residence, and Total Scale 1 scores were as follows: agriculture (reference group), 1; white collared, 1.16 (0.77-1.74); self-employed, 1.25 (0.87-1.78); unemployed, 1.27 (0.91-1.77); and blue collared, 1.50 (0.86-2.60). Conclusions: Women engaged in agriculture had a significantly higher tendency to have a better health status on the THI as compared to those from the other four occupational groups, and they exhibited the lowest HR as compared to their counterparts, though not statistically significant. We concluded that the perceived health status of unemployed women was similar to that of women engaged in agriculture.

Underestimating the frequency, strength and cost of antipredator responses with data from GPS collars: an example with wolves and elk

PubMed Central

Creel, Scott; Winnie, John A; Christianson, David

2013-01-01

Field studies that rely on fixes from GPS-collared predators to identify encounters with prey will often underestimate the frequency and strength of antipredator responses. These underestimation biases have several mechanistic causes. (1) Step bias: The distance between successive GPS fixes can be large, and encounters that occur during these intervals go undetected. This bias will generally be strongest for cursorial hunters that can rapidly cover large distances (e.g., wolves and African wild dogs) and when the interval between GPS fixes is long relative to the duration of a hunt. Step bias is amplified as the path travelled between successive GPS fixes deviates from a straight line. (2) Scatter bias: Only a small fraction of the predators in a population typically carry GPS collars, and prey encounters with uncollared predators go undetected unless a collared group-mate is present. This bias will generally be stronger for fission–fusion hunters (e.g., spotted hyenas, wolves, and lions) than for highly cohesive hunters (e.g., African wild dogs), particularly when their group sizes are large. Step bias and scatter bias both cause underestimation of the frequency of antipredator responses. (3) Strength bias: Observations of prey in the absence of GPS fix from a collared predator will generally include a mixture of cases in which predators were truly absent and cases in which predators were present but not detected, which causes underestimation of the strength of antipredator responses. We quantified these biases with data from wolves and African wild dogs and found that fixes from GPS collars at 3-h intervals underestimated the frequency and strength of antipredator responses by a factor >10. We reexamined the results of a recent study of the nonconsumptive effects of wolves on elk in light of these results and confirmed that predation risk has strong effects on elk dynamics by reducing the pregnancy rate. PMID:24455148

Yuma proving grounds automatic UXO detection using biomorphic robots

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tilden, M.W.

1996-07-01

The current variety and dispersion of Unexploded Ordnance (UXO) is a daunting technological problem for current sensory and extraction techniques. The bottom line is that the only way to insure a live UXO has been found and removed is to step on it. As this is an upsetting proposition for biological organisms like animals, farmers, or Yuma field personnel, this paper details a non-biological approach to developing inexpensive, automatic machines that will find, tag, and may eventually remove UXO from a variety of terrains by several proposed methods. The Yuma proving grounds (Arizona) has been pelted with bombs, mines, missiles,more » and shells since the 1940s. The idea of automatic machines that can clean up after such testing is an old one but as yet unrealized because of the daunting cost, power and complexity requirements of capable robot mechanisms. A researcher at Los Alamos National Laboratory has invented and developed a new variety of living robots that are solar powered, legged, autonomous, adaptive to massive damage, and very inexpensive. This technology, called Nervous Networks (Nv), allows for the creation of capable walking mechanisms (known as Biomorphic robots, or Biomechs for short) that rather than work from task principles use instead a survival-based design philosophy. This allows Nv based machines to continue doing work even after multiple limbs and sensors have been removed or damaged, and to dynamically negotiate complex terrains as an emergent property of their operation (fighting to proceed, as it were). They are not programmed, and indeed, the twelve transistor Nv controller keeps their electronic cost well below that of most pocket radios. It is suspected that advanced forms of these machines in huge numbers may be an interesting, capable solution to the problem of general and specific UXO identification, tagging, and removal.« less

Efficacy of a slow-release imidacloprid (10%)/flumethrin (4.5%) collar for the prevention of canine leishmaniosis

PubMed Central

2014-01-01

Background The efficacy of a slow-release insecticidal and repellent collar containing 10% imidacloprid and 4.5% flumethrin (Seresto, Bayer Animal Health) in preventing Leishmania infantum infection was evaluated in a large population of dogs living in a hyper-endemic area of Sicily (Italy). Methods A total of 219 dogs, negative for L. infantum were enrolled in a multicentre, controlled study. Dogs were divided into two homogeneous groups, defined as G1 (n = 102) and G2 (n = 117). Before the start of the sand fly season, dogs in G1 were treated with the collar while animals in G2 were left untreated, serving as negative controls. Dogs were serially sampled on day D90, D180, D210 and D300 in order to assess Leishmania infection by IFAT, PCR on skin (D210-D300) and bone marrow (D300) and cytology on bone marrow aspirate (D300). Results Three dogs (2.9%) in G1 and 41 (40.2%) in G2 became positive for L. infantum in at least one of the diagnostic tests employed in the study. The number of seropositive dogs in G2 increased in the course of the study from 15 (D90) to 41 (D300), with some of them also positive in other diagnostic tests. Eight (19.6%) of the seropositive dogs in G2 showed an increase in antibody titers ranging from 1:160 to 1:1,280. At the last follow-up, some of dogs in G2 displayed overt clinical signs suggestive of leishmaniosis. The mean incidence density rate at the final follow-up was 4.0% for G1 and 60.7% for G2, leading to a mean efficacy of the collar in protecting dogs at both sites of 93.4%. Conclusions The slow-release collar tested in this study was shown to be safe and highly effective in preventing L. infantum infection in a large population of dogs. Protection conferred by a single collar (up to eight months) spanned an entire sand fly season in a hyper-endemic area of southern Italy. The regular use of collars, at least during the sand fly season, may represent a reliable and sustainable strategy for the prevention of leishmaniosis in dogs living in or travelling to an endemic area. PMID:25023573

Update on the biological effects of ionizing radiation, relative dose factors and radiation hygiene.

PubMed

White, Stuart C; Mallya, S M

2012-03-01

Diagnostic imaging is an indispensable part of contemporary medical and dental practice. Over the last few decades there has been a dramatic increase in the use of ionizing radiation for diagnostic imaging. The carcinogenic effects of high-dose exposure are well known. Does diagnostic radiation rarely cause cancer? We don't know but we should act as if it does. Accordingly, dentists should select patients wisely - only make radiographs when there is patient-specific reason to believe there is a reasonable expectation the radiograph will offer unique information influencing diagnosis or treatment. Low-dose examinations should be made: intraoral imaging - use fast film or digital sensors, thyroid collars, rectangular collimation; panoramic and lateral cephalometric imaging - use digital systems or rare-earth film screen combinations; and cone beam computed tomography - use low-dose machines, restrict field size to region of interest, reduce mA and length of exposure arc as appropriate. © 2012 Australian Dental Association.

Standard guidelines of care: CO2 laser for removal of benign skin lesions and resurfacing.

PubMed

Krupashankar, D S

2008-01-01

Resurfacing is a treatment to remove acne and chicken pox scars, and changes in the skin due to ageing. MACHINES: Both ablative and nonablative lasers are available for use. CO 2 laser is the gold standard in ablative lasers. Detailed knowledge of the machines is essential. INDICATIONS FOR CO 2 LASER: Therapeutic indications: Actinic and seborrheic keratosis, warts, moles, skin tags, epidermal and dermal nevi, vitiligo blister and punch grafting, rhinophyma, sebaceous hyperplasia, xanthelasma, syringomas, actinic cheilitis angiofibroma, scar treatment, keloid, skin cancer, neurofibroma and diffuse actinic keratoses. CO 2 laser is not recommended for the removal of tattoos. AESTHETIC INDICATIONS: Resurfacing for acne, chicken pox and surgical scars, periorbital and perioral wrinkles, photo ageing changes, facial resurfacing. PHYSICIANS' QUALIFICATIONS: Any qualified dermatologist (DVD or MD) may practice CO 2 laser. The dermatologist should possess postgraduate qualification in dermatology and should have had specific hands-on training in lasers either during postgraduation or later at a facility which routinely performs laser procedures under a competent dermatologist/plastic surgeon, who has experience and training in using lasers. For the use of CO 2 lasers for benign growths, a full day workshop is adequate. As parameters may vary in different machines, specific training with the available machine at either the manufacturer's facility or at another centre using the machine is recommended. CO 2 lasers can be used in the dermatologist's minor procedure room for the above indications. However, when used for full-face resurfacing, the hospital operation theatre or day care facility with immediate access to emergency medical care is essential. Smoke evacuator is mandatory. Detailed counseling with respect to the treatment, desired effects, possible postoperative complications, should be discussed with the patient. The patient should be provided brochures to study and also given adequate opportunity to seek information. Detailed consent forms need to be completed by the patients. Consent forms should include information on the machine used; possible postoperative course expected and postoperative complications. Preoperative photography should be carried out in all cases of resurfacing. Choice of the machine and the parameters depends on the site, type of lesion, result needed, and the physician's experience. Localized lesions can be treated under eutectic mixture of local anesthesia (EMLA) cream anesthesia or local infiltration anesthesia. Full-face resurfacing can be performed under general anesthesia. Proper postoperative care is important to avoid complications.

An Examination of Blue- versus White-Collar Workers' Conceptualizations of Job Satisfaction Facets

ERIC Educational Resources Information Center

Hu, Xiaoxiao; Kaplan, Seth; Dalal, Reeshad S.

2010-01-01

This study examined the degree to which blue- versus white-collar workers differentially conceptualize various job facets, namely the work itself, co-workers, supervisors, and pay. To examine these potential differences, we conducted a series of analyses on job satisfaction ratings from two samples of university workers. Consistent with the study…

Reading Competence of the Saudi EFL Learner: Empowering the Teachers through Linguistics

ERIC Educational Resources Information Center

Alfallaj, Fahad Saleh Suleiman

2017-01-01

The trend in the Reading class in KSA has been what is called "Standards Based Proficiency" as opposed to the more desirable "Real World Reading Requirements". This is also where the greatest gap occurs. Whereas white collar jobs may require more reading, blue collar jobs may invariably involve reading of technical manuals and…

Field performance of Nuttall Oak on former agricultural fields: Initial effects of nursery source and competition control

Treesearch

Emile S. Gardiner; K. Francis Salifu; Douglass F. Jacobs; George Hernandez; Ronald P. Overton

2007-01-01

Nuttall oak (Quercus nuttallii Palm.) seedlings raised at state nurseries in Mississippi, Louisiana, and Arkansas were morphologically different in height, root collar diameter, fresh mass, number of first-order lateral roots, root volume, and height-to-root collar diameter ratio. When outplanted on afforestation sites in the Lower Mississippi...

White Collar Work: Career Ambitions of Fiji Final Year School Students

ERIC Educational Resources Information Center

Nilan, Pam; Cavu, Paula; Tagicakiverata, Isimeli; Hazelman, Emily

2006-01-01

The career ambitions of 1012 pupils in the final years of secondary schooling in Fiji were surveyed. The range of careers they nominated was very narrow, with teaching, nursing and other white collar work in the majority of responses. This stands in somewhat stark contrast to projected labour force needs, and the current serious shortage of…

"The Eyes of the Power Company": Workplace Information Practices of a Vault Inspector

ERIC Educational Resources Information Center

Veinot, Tiffany C.

2007-01-01

To date, LIS studies of workplace information practices have primarily focused on occupations that require a university education, and, consequently, little is known about the information practices of blue-collar workers. This study uses a qualitative case study approach to examine the workplace information practices of a blue-collar worker--a…

White Collar Crime. Instructor's Guide [and] Student Materials. Business Issues in the Classroom. Revised.

ERIC Educational Resources Information Center

Maxey, Phyllis F.

One of a series of units on business issues designed for secondary school students, this packet examines white collar crime. Teacher and student materials are provided in two separate sections. The teacher's guide contains four lesson plans as well as research project recommendations, student handouts, answer keys, and suggestions for using a…

Field performance of Nuttall oak on former agricultural fields: Initial effects of nursery source and competition control

Treesearch

Emile S. Gardiner; K. Francis Salifu; Douglass F. Jacobs; George Hernandez; Ronald P. Overton

2007-01-01

Nuttall oak (Quercus nuttallii Palm.) seedlings raised at state nurseries in Mississippi, Louisiana, and Arkansas were morphologically different in height, root collar diameter, fresh mass, number of first-order lateral roots, root volume, and height-to-root collar diameter ratio. When outplanted on afforestation sites in the Lower Mississippi...

Surviving Unemployment: Economic Resources and Job Loss Duration in Blue Collar Households.

ERIC Educational Resources Information Center

Sales, Esther

1995-01-01

Examines the economic resources of displaced blue-collar workers (n=324) coping with job loss for varying lengths of time. Data revealed the pivotal role of unemployment benefits in maintaining a household's economic viability. Findings suggest that the service needs of unemployed workers may become much greater as their economic plight deepens.…

The Origin of Black Smock and White Collar

ERIC Educational Resources Information Center

Hesapcioglu, Muhsin; Meseci Giorgetti, Filiz

2009-01-01

Although there are many empirical studies on the functions of school uniform, studies which focus on the origins of school uniform are neglected. Purpose of this study is to reveal historical origins of black smock and white collar. To achieve this purpose, a qualitative research method was adopted. As a result of the research, it was determined…

The Educational Potential of Blue-Collar Workers in Udmurtia

ERIC Educational Resources Information Center

Makarova, M. N.

2007-01-01

A strategically essential area for Russia's economy in the transition to market relations and the unequal development of the sectorial structure is the development of the sphere of production, which is now in a state of instability. The forecasted decline of manpower resources, the aging of blue-collar cadres, and the slump in the number of those…

Factors Affecting Success for Women in Skilled Blue Collar Jobs.

ERIC Educational Resources Information Center

Walshok, Mary Lindenstein

Women's success in nontraditional blue collar jobs in the skilled trades or crafts appears to be tied to three separate but interrelated issues which are a function of differences in social background and shift in the structure of employment and economic opportunities for women, according to qualitative data gathered in in-depth interviews of more…

Vegetative regeneration

Treesearch

George A. Schier; John R. Jones; Robert P. Winokur

1985-01-01

Aspen is noted for its ability to regenerate vegetatively by adventitious shoots or suckers that arise on its long lateral roots. It also produces sprouts from stumps and root collars; but they are not common. In a survey of regeneration after clearcutting mature aspen in Utah. Baker (1918b) found that 92% of the shoots originated from roots, 7% from root collars, and...

The German 'Dual System' of Occupational Training: A Much-Replicated but Oft-Failed Transfer.

ERIC Educational Resources Information Center

Wilson, David N.

Germany's Dual System, which consists of in-school and in-enterprise components, facilitates entry into 374 recognized technical, white-collar and blue-collar occupations listed in training regulations that are grounded in legislation. The Dual System's origins and development in Germany were examined along with several attempts to replicate the…

75 FR 38417 - Carbaryl; Order Denying Washington Toxics Coalition Petition to Revoke Tolerances and Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-02

... uses on lawns and gardens, and indoors in kennels and on pet sleeping quarters. It was also registered...; cancellation of the following uses and application methods: all pet uses (dusts and liquids) except collars... carbaryl in pet collars, and environmental fate data. The product-specific DCI required acute toxicity and...

Monitoring Animal Behaviour and Environmental Interactions Using Wireless Sensor Networks, GPS Collars and Satellite Remote Sensing

PubMed Central

Handcock, Rebecca N.; Swain, Dave L.; Bishop-Hurley, Greg J.; Patison, Kym P.; Wark, Tim; Valencia, Philip; Corke, Peter; O'Neill, Christopher J.

2009-01-01

Remote monitoring of animal behaviour in the environment can assist in managing both the animal and its environmental impact. GPS collars which record animal locations with high temporal frequency allow researchers to monitor both animal behaviour and interactions with the environment. These ground-based sensors can be combined with remotely-sensed satellite images to understand animal-landscape interactions. The key to combining these technologies is communication methods such as wireless sensor networks (WSNs). We explore this concept using a case-study from an extensive cattle enterprise in northern Australia and demonstrate the potential for combining GPS collars and satellite images in a WSN to monitor behavioural preferences and social behaviour of cattle. PMID:22412327

Selection of Wire Electrical Discharge Machining Process Parameters on Stainless Steel AISI Grade-304 using Design of Experiments Approach

NASA Astrophysics Data System (ADS)

Lingadurai, K.; Nagasivamuni, B.; Muthu Kamatchi, M.; Palavesam, J.

2012-06-01

Wire electrical discharge machining (WEDM) is a specialized thermal machining process capable of accurately machining parts of hard materials with complex shapes. Parts having sharp edges that pose difficulties to be machined by the main stream machining processes can be easily machined by WEDM process. Design of Experiments approach (DOE) has been reported in this work for stainless steel AISI grade-304 which is used in cryogenic vessels, evaporators, hospital surgical equipment, marine equipment, fasteners, nuclear vessels, feed water tubing, valves, refrigeration equipment, etc., is machined by WEDM with brass wire electrode. The DOE method is used to formulate the experimental layout, to analyze the effect of each parameter on the machining characteristics, and to predict the optimal choice for each WEDM parameter such as voltage, pulse ON, pulse OFF and wire feed. It is found that these parameters have a significant influence on machining characteristic such as metal removal rate (MRR), kerf width and surface roughness (SR). The analysis of the DOE reveals that, in general the pulse ON time significantly affects the kerf width and the wire feed rate affects SR, while, the input voltage mainly affects the MRR.

Removing Chinese privet from riparian forests still benefits pollinators five years later

Treesearch

Jacob R. Hudson; James Hanula; Scott Horn

2014-01-01

Chinese privet (Ligustrum sinense) is an invasive shrub of the Southeastern U.S. that forms dense stands and limits biodiversity. It was removed from heavily infested riparian forests of the Georgia Piedmont in 2005 by mulching machine or chainsaw felling and subsequent herbicide application. Abundance and species richness of bees and butterflies...

[Limits of self regulation of the private food sector: the case of removing of vending machines from schools].

PubMed

Michaud, Claude; Baudier, François

2007-01-01

Conflicts of interest between the food industry and public decision makers have increasingly multiplied over the last few years, especially within the context of implementing the French National Nutrition Programme. This paper describes the rhetoric and the strategies developed by the private sector in order to counter the law's implementation and enforcement based on a concrete example, namely, the removal of vending machines from schools. After having evoked possibilities of developing new partnerships as suggested by national and international health authorities, it reaffirms the right and the duty of the State to regulate within the framework of a health promotion policy, an approach which integrates the necessary open democratic public debate between the different sectors.

Predictive Modeling and Optimization of Vibration-assisted AFM Tip-based Nanomachining

NASA Astrophysics Data System (ADS)

Kong, Xiangcheng

The tip-based vibration-assisted nanomachining process offers a low-cost, low-effort technique in fabricating nanometer scale 2D/3D structures in sub-100 nm regime. To understand its mechanism, as well as provide the guidelines for process planning and optimization, we have systematically studied this nanomachining technique in this work. To understand the mechanism of this nanomachining technique, we firstly analyzed the interaction between the AFM tip and the workpiece surface during the machining process. A 3D voxel-based numerical algorithm has been developed to calculate the material removal rate as well as the contact area between the AFM tip and the workpiece surface. As a critical factor to understand the mechanism of this nanomachining process, the cutting force has been analyzed and modeled. A semi-empirical model has been proposed by correlating the cutting force with the material removal rate, which was validated using experimental data from different machining conditions. With the understanding of its mechanism, we have developed guidelines for process planning of this nanomachining technique. To provide the guideline for parameter selection, the effect of machining parameters on the feature dimensions (depth and width) has been analyzed. Based on ANOVA test results, the feature width is only controlled by the XY vibration amplitude, while the feature depth is affected by several machining parameters such as setpoint force and feed rate. A semi-empirical model was first proposed to predict the machined feature depth under given machining condition. Then, to reduce the computation intensity, linear and nonlinear regression models were also proposed and validated using experimental data. Given the desired feature dimensions, feasible machining parameters could be provided using these predictive feature dimension models. As the tip wear is unavoidable during the machining process, the machining precision will gradually decrease. To maintain the machining quality, the guideline for when to change the tip should be provided. In this study, we have developed several metrics to detect tip wear, such as tip radius and the pull-off force. The effect of machining parameters on the tip wear rate has been studied using these metrics, and the machining distance before a tip must be changed has been modeled using these machining parameters. Finally, the optimization functions have been built for unit production time and unit production cost subject to realistic constraints, and the optimal machining parameters can be found by solving these functions.

Coyote removal, understory cover, and survival of white-tailed deer neonates: Coyote Control and Fawn Survival

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kilgo, John C.; Vukovich, Mark; Ray, H. Scott

Predation by coyotes (Canis latrans) on white-tailed deer (Odocoileus virginianus) neonates has led to reduced recruitment in many deer populations in southeastern North America. This low recruitment combined with liberal antlerless deer harvest has resulted in declines in some deer populations, and consequently, increased interest in coyote population control. We investigated whether neonate survival increased after coyote removal, whether coyote predation on neonates was additive to other mortality sources, and whether understory vegetation density affected neonate survival. We monitored neonate survival for 4 years prior to (2006–2009) and 3 years during (2010–2012) intensive coyote removal on 3 32-km 2 unitsmore » on the United States Department of Energy’s Savannah River Site, South Carolina. We removed 474 coyotes (1.63 coyotes/km 2 per unit per year), reducing coyote abundance by 78% from pre-removal levels. The best model (w i = 0.927) describing survival probability among 216 radio-collared neonates included a within-year quadratic time trend variable, date of birth, removal treatment, and a varying removal year effect. Under this model, survival differed between pre-treatment and removal periods and it differed among years during the removal period, being >100% greater than pre-treatment survival (0.228) during the first removal year (0.513), similar to pre-treatment survival during the second removal year (0.202), and intermediate during the third removal year (0.431). Despite an initial increase, the overall effect of coyote removal on neonate survival was modest. Mortality rate attributable to coyote predation was lowest during the first removal year (0.357) when survival was greatest, but the mortality rate from all other causes did not differ between the pretreatment period and any year during removals, indicating that coyote predation acted as an additive source of mortality. Survival probability was not related to vegetation cover, either directly or in interaction with coyote abundance. When the objective is to increase the recruitment of white-tailed deer, we conclude that neither coyote control nor vegetation management appear effective. Reduction of the antlerless harvest may be necessary to meet this objective, but this harvest strategy warrants additional research in Southeastern deer populations.« less

Microbial Contamination of Ice Machines Is Mediated by Activated Charcoal Filtration Systems in a City Hospital.

PubMed

Yorioka, Katsuhiro; Oie, Shigeharu; Hayashi, Koji; Kimoto, Hiroo; Furukawa, Hiroyuki

2016-06-01

Although microbial contamination of ice machines has been reported, no previous study has addressed microbial contamination of ice produced by machines equipped with activated charcoal (AC) filters in hospitals. The aim of this study was to provide clinical data for evaluating AC filters to prevent microbial contamination of ice. We compared microbial contamination in ice samples produced by machines with (n = 20) and without an AC filter (n = 40) in Shunan City Shinnanyo Municipal Hospital. All samples from the ice machine equipped with an AC filter contained 10-116 CFUs/g of glucose nonfermenting gram-negative bacteria such as Pseudomonas aeruginosa and Chryseobacterium meningosepticum. No microorganisms were detected in samples from ice machines without AC filters. After the AC filter was removed from the ice machine that tested positive for Gram-negative bacteria, the ice was resampled (n = 20). Analysis found no contaminants. Ice machines equipped with AC filters pose a serious risk factor for ice contamination. New filter-use guidelines and regulations on bacterial detection limits to prevent contamination of ice in healthcare facilities are necessary.

Machining of AISI D2 Tool Steel with Multiple Hole Electrodes by EDM Process

NASA Astrophysics Data System (ADS)

Prasad Prathipati, R.; Devuri, Venkateswarlu; Cheepu, Muralimohan; Gudimetla, Kondaiah; Uzwal Kiran, R.

2018-03-01

In recent years, with the increasing of technology the demand for machining processes is increasing for the newly developed materials. The conventional machining processes are not adequate to meet the accuracy of the machining of these materials. The non-conventional machining processes of electrical discharge machining is one of the most efficient machining processes is being widely used to machining of high accuracy products of various industries. The optimum selection of process parameters is very important in machining processes as that of an electrical discharge machining as they determine surface quality and dimensional precision of the obtained parts, even though time consumption rate is higher for machining of large dimension features. In this work, D2 high carbon and chromium tool steel has been machined using electrical discharge machining with the multiple hole electrode technique. The D2 steel has several applications such as forming dies, extrusion dies and thread rolling. But the machining of this tool steel is very hard because of it shard alloyed elements of V, Cr and Mo which enhance its strength and wear properties. However, the machining is possible by using electrical discharge machining process and the present study implemented a new technique to reduce the machining time using a multiple hole copper electrode. In this technique, while machining with multiple holes electrode, fin like projections are obtained, which can be removed easily by chipping. Then the finishing is done by using solid electrode. The machining time is reduced to around 50% while using multiple hole electrode technique for electrical discharge machining.

Research on electrodischarge drilling of polycrystalline diamond with increased gap voltage

NASA Astrophysics Data System (ADS)

Skoczypiec, Sebastian; Bizoń, Wojciech; Żyra, Agnieszka

2018-05-01

This paper presents an experimental investigation of the machining characteristics of polycrystalline diamond (PCD). Machining of PCD by conventional technologies is not an effective solution. Due to presence of cobalt this material can be machined by application of electrical discharges. On the other side, electrical conductivity of PCD is on the limit of electrodischarge machining (EDM) possibilities. Proposed paper reports experimental investigation on electrodischarge drilling of PCD samples. The test were carried out with application on of high-voltage (up to 550 V) pulse power unit for two kinds of dielectrics: carbon based (Exxsol D80) and de-ionized water. As output parameters machining accuracy (side gap), material removal rate were selected. Also, based on SEM photographs and energy dispersive X-ray spectroscopy (EDS) analysis, a qualitative evaluation of the obtained results was presented.

Machinability of Al 6061 Deposited with Cold Spray Additive Manufacturing

NASA Astrophysics Data System (ADS)

Aldwell, Barry; Kelly, Elaine; Wall, Ronan; Amaldi, Andrea; O'Donnell, Garret E.; Lupoi, Rocco

2017-10-01

Additive manufacturing techniques such as cold spray are translating from research laboratories into more mainstream high-end production systems. Similar to many additive processes, finishing still depends on removal processes. This research presents the results from investigations into aspects of the machinability of aluminum 6061 tubes manufactured with cold spray. Through the analysis of cutting forces and observations on chip formation and surface morphology, the effect of cutting speed, feed rate, and heat treatment was quantified, for both cold-sprayed and bulk aluminum 6061. High-speed video of chip formation shows changes in chip form for varying material and heat treatment, which is supported by the force data and quantitative imaging of the machined surface. The results shown in this paper demonstrate that parameters involved in cold spray directly impact on machinability and therefore have implications for machining parameters and strategy.

A 34-meter VAWT (Vertical Axis Wind Turbine) point design

NASA Astrophysics Data System (ADS)

Ashwill, T. D.; Berg, D. E.; Dodd, H. M.; Rumsey, M. A.; Sutherland, H. J.; Veers, P. S.

The Wind Energy Division at Sandia National Laboratories recently completed a point design based on the 34-m Vertical Axis Wind Turbine (VAWT) Test Bed. The 34-m Test Bed research machine incorporates several innovations that improve Darrieus technology, including increased energy production, over previous machines. The point design differs minimally from the Test Bed; but by removing research-related items, its estimated cost is substantially reduced. The point design is a first step towards a Test-Bed-based commercial machine that would be competitive with conventional sources of power in the mid-1990s.

Simple technique for observing subsurface damage in machining of ceramics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, H.H.K.; Jahanmir, S.

1994-05-01

A simple technique is proposed for directly observing subsurface damage in the machining of ceramics. The technique requires two polished specimens and an optical microscope with Nomarski illumination for examination. The subsurface damage created by the grinding of an alumina ceramic is investigated using this technique. The mode of damage is identified as intragrain twinning/slip, and intergranular and transgranular cracking. Chipping along the twinned planes and along the transgranular crack planes, and dislodgement of the intergranularly debonded grains are suggested to be the mechanisms of material removal in the machining of this alumina ceramic.