Sample records for collection time points

  1. Collective efficacy: How is it conceptualized, how is it measured, and does it really matter for understanding perceived neighborhood crime and disorder?

    PubMed Central

    Hipp, John R.

    2016-01-01

    Building on the insights of the self-efficacy literature, this study highlights that collective efficacy is a collective perception that comes from a process. This study emphasizes that 1) there is updating, as there are feedback effects from success or failure by the group to the perception of collective efficacy, and 2) this updating raises the importance of accounting for members' degree of uncertainty regarding neighborhood collective efficacy. Using a sample of 113 block groups in three rural North Carolina counties, this study finds evidence of updating as neighborhoods perceiving more crime or disorder reported less collective efficacy at the next time point. Furthermore, collective efficacy was only associated with lower perceived disorder at the next time point when it occurred in highly cohesive neighborhoods. Finally, neighborhoods with more perceived disorder and uncertainty regarding collective efficacy at one time point had lower levels of collective efficacy at the next time point, illustrating the importance of uncertainty along with updating. PMID:27069285

  2. On the improvement of blood sample collection at clinical laboratories

    PubMed Central

    2014-01-01

    Background Blood samples are usually collected daily from different collection points, such hospitals and health centers, and transported to a core laboratory for testing. This paper presents a project to improve the collection routes of two of the largest clinical laboratories in Spain. These routes must be designed in a cost-efficient manner while satisfying two important constraints: (i) two-hour time windows between collection and delivery, and (ii) vehicle capacity. Methods A heuristic method based on a genetic algorithm has been designed to solve the problem of blood sample collection. The user enters the following information for each collection point: postal address, average collecting time, and average demand (in thermal containers). After implementing the algorithm using C programming, this is run and, in few seconds, it obtains optimal (or near-optimal) collection routes that specify the collection sequence for each vehicle. Different scenarios using various types of vehicles have been considered. Unless new collection points are added or problem parameters are changed substantially, routes need to be designed only once. Results The two laboratories in this study previously planned routes manually for 43 and 74 collection points, respectively. These routes were covered by an external carrier company. With the implementation of this algorithm, the number of routes could be reduced from ten to seven in one laboratory and from twelve to nine in the other, which represents significant annual savings in transportation costs. Conclusions The algorithm presented can be easily implemented in other laboratories that face this type of problem, and it is particularly interesting and useful as the number of collection points increases. The method designs blood collection routes with reduced costs that meet the time and capacity constraints of the problem. PMID:24406140

  3. A Comparison of Methods for Estimating Relationships in the Change between Two Time Points for Latent Variables

    ERIC Educational Resources Information Center

    Finch, W. Holmes; Shim, Sungok Serena

    2018-01-01

    Collection and analysis of longitudinal data is an important tool in understanding growth and development over time in a whole range of human endeavors. Ideally, researchers working in the longitudinal framework are able to collect data at more than two points in time, as this will provide them with the potential for a deeper understanding of the…

  4. Combined VSWIR/TIR Products Overview: Issues and Examples

    NASA Technical Reports Server (NTRS)

    Knox, Robert G.

    2010-01-01

    The presentation provides a summary of VSWIR data collected at 19-day intervals for most areas. TIR data was collected both day and night on a 5-day cycle (more frequently at higher latitudes), the TIR swath is four times as wide as VSWIR, and the 5-day orbit repeat is approximate. Topics include nested swath geometry for reference point design and coverage simulations for sample FLUXNET tower sites. Other points examined include variation in latitude for revisit frequency, overpass times, and TIR overlap geometry and timing between VSWIR data collections.

  5. From point process observations to collective neural dynamics: Nonlinear Hawkes process GLMs, low-dimensional dynamics and coarse graining

    PubMed Central

    Truccolo, Wilson

    2017-01-01

    This review presents a perspective on capturing collective dynamics in recorded neuronal ensembles based on multivariate point process models, inference of low-dimensional dynamics and coarse graining of spatiotemporal measurements. A general probabilistic framework for continuous time point processes reviewed, with an emphasis on multivariate nonlinear Hawkes processes with exogenous inputs. A point process generalized linear model (PP-GLM) framework for the estimation of discrete time multivariate nonlinear Hawkes processes is described. The approach is illustrated with the modeling of collective dynamics in neocortical neuronal ensembles recorded in human and non-human primates, and prediction of single-neuron spiking. A complementary approach to capture collective dynamics based on low-dimensional dynamics (“order parameters”) inferred via latent state-space models with point process observations is presented. The approach is illustrated by inferring and decoding low-dimensional dynamics in primate motor cortex during naturalistic reach and grasp movements. Finally, we briefly review hypothesis tests based on conditional inference and spatiotemporal coarse graining for assessing collective dynamics in recorded neuronal ensembles. PMID:28336305

  6. From point process observations to collective neural dynamics: Nonlinear Hawkes process GLMs, low-dimensional dynamics and coarse graining.

    PubMed

    Truccolo, Wilson

    2016-11-01

    This review presents a perspective on capturing collective dynamics in recorded neuronal ensembles based on multivariate point process models, inference of low-dimensional dynamics and coarse graining of spatiotemporal measurements. A general probabilistic framework for continuous time point processes reviewed, with an emphasis on multivariate nonlinear Hawkes processes with exogenous inputs. A point process generalized linear model (PP-GLM) framework for the estimation of discrete time multivariate nonlinear Hawkes processes is described. The approach is illustrated with the modeling of collective dynamics in neocortical neuronal ensembles recorded in human and non-human primates, and prediction of single-neuron spiking. A complementary approach to capture collective dynamics based on low-dimensional dynamics ("order parameters") inferred via latent state-space models with point process observations is presented. The approach is illustrated by inferring and decoding low-dimensional dynamics in primate motor cortex during naturalistic reach and grasp movements. Finally, we briefly review hypothesis tests based on conditional inference and spatiotemporal coarse graining for assessing collective dynamics in recorded neuronal ensembles. Published by Elsevier Ltd.

  7. A model for the implementation of a two-shift municipal solid waste and recyclable material collection plan that offers greater convenience to residents.

    PubMed

    Lin, Hung-Yueh; Tsai, Zong-Pei; Chen, Guan-Hwa; Kao, Jehng-Jung

    2011-01-01

    Separating recyclables from municipal solid waste (MSW) before collection reduces not only the quantity of MSW that needs to be treated but also the depletion of resources. However, the participation of residents is essential for a successful recycling program, and the level of participation usually depends on the degree of convenience associated with accessing recycling collection points. The residential accessing convenience (RAC) of a collection plan is determined by the proximity of its collection points to all residents and its temporal flexibility in response to resident requirements. The degree of proximity to all residents is determined by using a coverage radius that represents the maximum distance residents need to travel to access a recycling point. The temporal flexibility is assessed by the availability of proximal recycling points at times suitable to the lifestyles of all residents concerned. In Taiwan, the MSW collection is implemented at fixed locations and at fixed times. Residents must deposit their garbage directly into the collection vehicle. To facilitate the assignment of collection vehicles and to encourage residents to thoroughly separate their recyclables, in Taiwan MSW and recyclable materials are usually collected at the same time by different vehicles. A heuristic procedure including an integer programming (IP) model and ant colony optimization (ACO) is explored in this study to determine an efficient two-shift collection plan that takes into account RAC factors. The IP model has been developed to determine convenient collection points in each shift on the basis of proximity, and then the ACO algorithm is applied to determine the most effective routing plan of each shift. With the use of a case study involving a city in Taiwan, this study has demonstrated that collection plans generated using the above procedure are superior to current collection plans on the basis of proximity and total collection distance.

  8. Evaluation of Time Spent by Pharmacists and Nurses Based on the Location of Pharmacist Involvement in Medication History Collection.

    PubMed

    Chhabra, Anmol; Quinn, Andrea; Ries, Amanda

    2018-01-01

    Accurate history collection is integral to medication reconciliation. Studies support pharmacy involvement in the process, but assessment of global time spent is limited. The authors hypothesized the location of a medication-focused interview would impact time spent. The objective was to compare time spent by pharmacists and nurses based on the location of a medication-focused interview. Time spent by the interviewing pharmacist, admitting nurse, and centralized pharmacist verifying admission orders was collected. Patient groups were based on whether the interview was conducted in the emergency department (ED) or medical floor. The primary end point was a composite of the 3 time points. Secondary end points were individual time components and number and types of transcription discrepancies identified during medical floor interviews. Pharmacists and nurses spent an average of ten fewer minutes per ED patient versus a medical floor patient ( P = .028). Secondary end points were not statistically significant. Transcription discrepancies were identified at a rate of 1 in 4 medications. Post hoc analysis revealed the time spent by pharmacists and nurses was 2.4 minutes shorter per medication when interviewed in the ED ( P < .001). The primary outcome was statistically and clinically significant. Limitations included inability to blind and lack of cost-saving analysis. Pharmacist involvement in ED medication reconciliation leads to time savings during the admission process.

  9. A Doubly Stochastic Change Point Detection Algorithm for Noisy Biological Signals.

    PubMed

    Gold, Nathan; Frasch, Martin G; Herry, Christophe L; Richardson, Bryan S; Wang, Xiaogang

    2017-01-01

    Experimentally and clinically collected time series data are often contaminated with significant confounding noise, creating short, noisy time series. This noise, due to natural variability and measurement error, poses a challenge to conventional change point detection methods. We propose a novel and robust statistical method for change point detection for noisy biological time sequences. Our method is a significant improvement over traditional change point detection methods, which only examine a potential anomaly at a single time point. In contrast, our method considers all suspected anomaly points and considers the joint probability distribution of the number of change points and the elapsed time between two consecutive anomalies. We validate our method with three simulated time series, a widely accepted benchmark data set, two geological time series, a data set of ECG recordings, and a physiological data set of heart rate variability measurements of fetal sheep model of human labor, comparing it to three existing methods. Our method demonstrates significantly improved performance over the existing point-wise detection methods.

  10. A uniform energy consumption algorithm for wireless sensor and actuator networks based on dynamic polling point selection.

    PubMed

    Li, Shuo; Peng, Jun; Liu, Weirong; Zhu, Zhengfa; Lin, Kuo-Chi

    2013-12-19

    Recent research has indicated that using the mobility of the actuator in wireless sensor and actuator networks (WSANs) to achieve mobile data collection can greatly increase the sensor network lifetime. However, mobile data collection may result in unacceptable collection delays in the network if the path of the actuator is too long. Because real-time network applications require meeting data collection delay constraints, planning the path of the actuator is a very important issue to balance the prolongation of the network lifetime and the reduction of the data collection delay. In this paper, a multi-hop routing mobile data collection algorithm is proposed based on dynamic polling point selection with delay constraints to address this issue. The algorithm can actively update the selection of the actuator's polling points according to the sensor nodes' residual energies and their locations while also considering the collection delay constraint. It also dynamically constructs the multi-hop routing trees rooted by these polling points to balance the sensor node energy consumption and the extension of the network lifetime. The effectiveness of the algorithm is validated by simulation.

  11. Ancho Canyon RF Collect, March 2, 2017: Final Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Junor, William; Layne, John Preston; Gamble, Thomas Kirk

    2017-09-21

    We report the results from the March 2, 2017, Ancho Canyon RF collection. While bright electromagnetic signals were seen nearby the firing point, there were no detections of signals from the explosively-fired fuse at a collection point about 570m distant on the East Mesa. However, "liveness" tests of the East Mesa data acquisition system and checks of the timing both suggest that the collection system was working correctly. We examine possible reasons for the lack of detection. Principal among these is that the impulsive signal may be small compared to the radio frequency background on the East Mesa.

  12. A Uniform Energy Consumption Algorithm for Wireless Sensor and Actuator Networks Based on Dynamic Polling Point Selection

    PubMed Central

    Li, Shuo; Peng, Jun; Liu, Weirong; Zhu, Zhengfa; Lin, Kuo-Chi

    2014-01-01

    Recent research has indicated that using the mobility of the actuator in wireless sensor and actuator networks (WSANs) to achieve mobile data collection can greatly increase the sensor network lifetime. However, mobile data collection may result in unacceptable collection delays in the network if the path of the actuator is too long. Because real-time network applications require meeting data collection delay constraints, planning the path of the actuator is a very important issue to balance the prolongation of the network lifetime and the reduction of the data collection delay. In this paper, a multi-hop routing mobile data collection algorithm is proposed based on dynamic polling point selection with delay constraints to address this issue. The algorithm can actively update the selection of the actuator's polling points according to the sensor nodes' residual energies and their locations while also considering the collection delay constraint. It also dynamically constructs the multi-hop routing trees rooted by these polling points to balance the sensor node energy consumption and the extension of the network lifetime. The effectiveness of the algorithm is validated by simulation. PMID:24451455

  13. A Model of Small Group Facilitator Competencies

    ERIC Educational Resources Information Center

    Kolb, Judith A.; Jin, Sungmi; Song, Ji Hoon

    2008-01-01

    This study used small group theory, quantitative and qualitative data collected from experienced practicing facilitators at three points of time, and a building block process of collection, analysis, further collection, and consolidation to develop a model of small group facilitator competencies. The proposed model has five components:…

  14. Augmented Citizen Science for Environmental Monitoring and Education

    NASA Astrophysics Data System (ADS)

    Albers, B.; de Lange, N.; Xu, S.

    2017-09-01

    Environmental monitoring and ecological studies detect and visualize changes of the environment over time. Some agencies are committed to document the development of conservation and status of geotopes and geosites, which is time-consuming and cost-intensive. Citizen science and crowd sourcing are modern approaches to collect data and at the same time to raise user awareness for environmental changes. Citizen scientists can take photographs of point of interests (POI) with smartphones and the PAN App, which is presented in this article. The user is navigated to a specific point and is then guided with an augmented reality approach to take a photo in a specific direction. The collected photographs are processed to time-lapse videos to visualize environmental changes. Users and experts in environmental agencies can use this data for long-term documentation.

  15. New Directions for Academic Video Game Collections: Strategies for Acquiring, Supporting, and Managing Online Materials

    ERIC Educational Resources Information Center

    Robson, Diane; Durkee, Patrick

    2012-01-01

    The work of collection development in academic video game collections is at a crucial point of transformation--gaming librarians are ready to expand beyond console games collected in disc and cartridge format to the world of Internet games. At the same time, forms and genres of video games such as serious and independent games are increasingly…

  16. Developing a Framework of Facilitator Competencies: Lessons from the Field

    ERIC Educational Resources Information Center

    Kolb, Judith A.; Jin, Sungmi; Song, Ji Hoon

    2008-01-01

    People in organizations are increasingly called upon to serve as small group facilitators or to assist in this role. This article uses data collected from practicing facilitators at three points of time and a building block process of collection, analysis, further collection, and consolidation to develop and refine a list of competencies. A…

  17. June 2017 Ancho Canyon RF Collects: Final Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Junor, William; Layne, John Preston; Goglio, Joshua Henry

    2017-09-21

    We report the results from the June 8, 2017, Ancho Canyon RF collection. While bright, electromagnetic signals were seen close to the firing point, there were no detections of signals from the explosively-fired fuse (EFF) at a collection point about 600m distant on the East Mesa. The East Mesa site was unable to collect data because the uninterruptible power supply (UPS) was exhausted by the time of the shot. We did see signals from the EFF at the Bunker 57 antennas, about 123m distant from the Point 88 firing point. The strength of these signals is consistent with our limitedmore » knowledge of the collection antenna performance and the use of the standard model to predict the electric field strength. From our knowledge of the geometry of the EFF loop and the current in the loop in this test, and from measurements at the Bunker 57 site, we predict that we would have seen signals of about 50mV at 3.67MHz in a 100 kHz channel on the Rohde & Schwarz HE010 antennas at the East Mesa location. The noise oor there is about 0.113mV (based on the March 2017 collects). Thus we would have had an SNR of 53 dB from the collect, had the data collection system been running.« less

  18. Compensatable muon collider calorimeter with manageable backgrounds

    DOEpatents

    Raja, Rajendran

    2015-02-17

    A method and system for reducing background noise in a particle collider, comprises identifying an interaction point among a plurality of particles within a particle collider associated with a detector element, defining a trigger start time for each of the pixels as the time taken for light to travel from the interaction point to the pixel and a trigger stop time as a selected time after the trigger start time, and collecting only detections that occur between the start trigger time and the stop trigger time in order to thereafter compensate the result from the particle collider to reduce unwanted background detection.

  19. Composite analysis for Escherichia coli at coastal beaches

    USGS Publications Warehouse

    Bertke, E.E.

    2007-01-01

    At some coastal beaches, concentrations of fecal-indicator bacteria can differ substantially between multiple points at the same beach at the same time. Because of this spatial variability, the recreational water quality at beaches is sometimes determined by stratifying a beach into several areas and collecting a sample from each area to analyze for the concentration of fecal-indicator bacteria. The average concentration of bacteria from those points is often used to compare to the recreational standard for advisory postings. Alternatively, if funds are limited, a single sample is collected to represent the beach. Compositing the samples collected from each section of the beach may yield equally accurate data as averaging concentrations from multiple points, at a reduced cost. In the study described herein, water samples were collected at multiple points from three Lake Erie beaches and analyzed for Escherichia coli on modified mTEC agar (EPA Method 1603). From the multiple-point samples, a composite sample (n = 116) was formed at each beach by combining equal aliquots of well-mixed water from each point. Results from this study indicate that E. coli concentrations from the arithmetic average of multiple-point samples and from composited samples are not significantly different (t = 1.59, p = 0.1139) and yield similar measures of recreational water quality; additionally, composite samples could result in a significant cost savings.

  20. Relations over Time among Children's Shyness, Emotionality, and Internalizing Problems

    ERIC Educational Resources Information Center

    Eggum, Natalie D.; Eisenberg, Nancy; Reiser, Mark; Spinrad, Tracy L.; Valiente, Carlos; Sallquist, Julie; Michalik, Nicole M.; Liew, Jeffrey

    2012-01-01

    Data regarding children's shyness and emotionality were collected at three time points, two years apart (T1: N = 214, M = 6.12 years; T2: N = 185, M = 7.67 years; T3: N = 185, M = 9.70 years), and internalizing data were collected at T1 and T3. Relations among parent-rated shyness, emotionality [parent- and teacher-rated anger, sadness, and…

  1. A clinical perspective on electronically collecting patient-reported outcomes at the point-of-care for overactive bladder

    PubMed Central

    Desantis, Darren; Baverstock, Richard J.; Civitarese, Andrea; Crump, R. Trafford; Carlson, Kevin V.

    2016-01-01

    Introduction Collecting patient-reported outcomes (PROs) can inform the treatment and management of overactive bladder (OAB). However, collecting these data at the point-of-care can be time-consuming and have a negative impact on a clinic’s workflow. The purpose of this study was to pilot a digital system for collecting PROs at the point-of-care and qualitatively assess clinicians’ perspectives in terms of the system’s impact on the delivery of care for OAB. Methods Patients visiting a urology clinic for OAB completed several PRO instruments using a tablet while awaiting assessment. Clinicians reviewed their responses using a digital dashboard during clinical encounters. Qualitative interviews were conducted with the clinicians, to assess the collection system’s impact in terms of: 1) logistics, 2) workflow; 3) patient communication; 4) influence on clinical decisions; 5) user experiences; and 6) the care model. Results Six interviews were conducted and thematic saturation was met, with several themes emerging. All participants were generally positive regarding the use of the digital collecting system. Participants felt that the dashboard improved workflow and enhanced communication with patients, but it was not thought to be any more influential on clinical decision-making than conventional collection methods. Several aspects of the digital PRO collection system were identified as needing improvement. Conclusions The digital PRO collection system used at the point-of-care had a positive impact on the delivery of care for OAB. The results from this study could provide insight to other urologists who are interested in collecting PROs in their clinic. PMID:27942273

  2. E-waste collection in Italy: Results from an exploratory analysis.

    PubMed

    Favot, Marinella; Grassetti, Luca

    2017-09-01

    This study looks at the performance of household electrical and electronic waste (WEEE) collection in 20 Italian regions from 2008 to 2015. The impact of several explicative variables on the results of e-waste collection is evaluated. The independent variables are socio-economic and demographic ones (age, gender, household size, education level, migration and income) along with technical-organisational variables (population density, presence of metropoles, macro regions, characteristics of the territory, percentage of household waste collected separately and number of e-waste collection points). The results show that the presence of collection points, the percentage of household waste collected separately and the percentage of females are positively correlated with the kg collected per inhabitant per year. For example, a variation of 1% of input (presence of collection points) corresponds to a 0.25% variation in the output (collection results) while 1% difference in the percentage of females in the population corresponds to a 7.549% difference in the collection rate. Population density, instead, is negatively correlated. It is interesting to note that there is a discrepancy between the Southern regions and the Centre regions (the former have an outcome 0.66 times lower than the latter) while the Northern regions perform similarly to the Centre ones. Moreover, the first year (2008) had a very low performance compared to the following years when the scheme constantly improved, mainly due to the additional collection points available. The Stochastic Frontier Model allows for the identification of the optimal production function among the 20 Italian regions. The best performing region is Tuscany (in the Centre), followed by Sardinia and Sicily (in the South). Copyright © 2017. Published by Elsevier Ltd.

  3. Motion Sickness Prevention by Stroboscopic Environment during Simulated Military Transport

    DTIC Science & Technology

    2009-07-20

    4 Data collection instruments ...Physician’s Desk Reference, 2001). Alternative remedies such as acupuncture, acupressure, acustimulation, and hypnosis are becoming increasingly popular...questions regarding the material. The passage was presented on 8.5 x 11 paper with 20 point Times New Roman font. Data collection instruments Motion

  4. 78 FR 36533 - Information Collection; Submission for OMB Review, Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-18

    ... appropriate next step for RSVP projects. The data submitted at the mid-point each year will also allow CNCS to..., electronic, mechanical, or other technological collection techniques or other forms of information technology... project management responsibilities. Four of the 19 comments specifically noted that grantee time is...

  5. A review on the modelling of collection and distribution of blood donation based on vehicle routing problem

    NASA Astrophysics Data System (ADS)

    Azezan, Nur Arif; Ramli, Mohammad Fadzli; Masran, Hafiz

    2017-11-01

    In this paper, we discussed a literature on blood collection-distribution that based on vehicle routing problem. This problem emergence when the process from collection to stock up must be completed in timely manner. We also modified the mathematical model so that it will suited to general collection of blood. A discussion on its algorithm and solution methods are also pointed out briefly in this paper.

  6. Time dependent reduction in platelet aggregation using the multiplate analyser and hirudin blood due to platelet clumping.

    PubMed

    Chapman, Kent; Favaloro, Emmanuel J

    2018-05-01

    The Multiplate is a popular instrument that measures platelet function using whole blood. Potentially considered a point of care instrument, it is also used by hemostasis laboratories. The instrument is usually utilized to assess antiplatelet medication or as a screen of platelet function. According to the manufacturer, testing should be performed within 0.5-3 hours of blood collection, and preferably using manufacturer provided hirudin tubes. We report time-associated reduction in platelet aggregation using the Multiplate and hirudin blood collection tubes, for all the major employed agonists. Blood for Multiplate analysis was collected into manufacturer supplied hirudin tubes, and 21 consecutive samples assessed using manufacturer supplied agonists (ADP, arachidonic acid, TRAP, collagen and ristocetin), at several time-points post-sample collection within the recommended test time period. Blood was also collected into EDTA as a reference method for platelet counts, with samples collected into sodium citrate and hirudin used for comparative counts. All platelet agonists showed a diminution of response with time. Depending on the agonist, the reduction caused 5-20% and 22-47% of responses initially in the normal reference range to fall below the reference range at 120min and 180min, respectively. Considering any agonist, 35% and 67% of initially "normal" responses became 'abnormal' at 120 min and 180 min, respectively. Platelet counts showed generally minimal changes in EDTA blood, but were markedly reduced over time in both citrate and hirudin blood, with up to 40% and 60% reduction, respectively, at 240 min. The presence of platelet clumping (micro-aggregate formation) was also observed in a time dependent manner, especially for hirudin. In conclusion, considering any platelet agonist, around two-thirds of samples can, within the recommended 0.5-3 hour testing window post-blood collection, yield a reduction in platelet aggregation that may lead to a change in interpretation (i.e., normal to reduced). Thus, the stability of Multiplate testing can more realistically be considered as being between 30-120 min of blood collection for samples collected into hirudin.

  7. Ignoring Individual Differences in Times of Assessment in Growth Curve Modeling

    ERIC Educational Resources Information Center

    Coulombe, Patrick; Selig, James P.; Delaney, Harold D.

    2016-01-01

    Researchers often collect longitudinal data to model change over time in a phenomenon of interest. Inevitably, there will be some variation across individuals in specific time intervals between assessments. In this simulation study of growth curve modeling, we investigate how ignoring individual differences in time points when modeling change over…

  8. Atmospheric plume progression as a function of time and distance from the release point for radioactive isotopes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Eslinger, Paul W.; Bowyer, Ted W.; Cameron, Ian M.

    2015-10-01

    The International Monitoring System contains up to 80 stations around the world that have aerosol and xenon monitoring systems designed to detect releases of radioactive materials to the atmosphere from nuclear tests. A rule of thumb description of plume concentration and duration versus time and distance from the release point is useful when designing and deploying new sample collection systems. This paper uses plume development from atmospheric transport modeling to provide a power-law rule describing atmospheric dilution factors as a function of distance from the release point.

  9. 76 FR 54470 - Proposed Data Collections Submitted for Public Comment and Recommendations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-01

    ..., patient name, patient ID number, and cost. Pharmacies utilize Electronic Data Interchange (EDI) processing at the point-of-sale to transmit claims to the World Trade Center Health Program (WTC-HP). The EDI... the point-of-sale. The EDI transmission occurs in real-time as the prescription transaction is made...

  10. Myocardial injury in dogs with snake envenomation and its relation to systemic inflammation.

    PubMed

    Langhorn, Rebecca; Persson, Frida; Ablad, Björn; Goddard, Amelia; Schoeman, Johan P; Willesen, Jakob L; Tarnow, Inge; Kjelgaard-Hansen, Mads

    2014-01-01

    To investigate the presence of myocardial injury in dogs hospitalized for snake envenomation and to examine its relationship with systemic inflammation. Prospective case-control study. University teaching hospital and small animal referral hospital. Dogs naturally envenomed by the European viper (Vipera berus; n = 24), African puff adder (Bitis arietans; n = 5), or snouted cobra (Naja annulifera; n = 9). Blood was collected from dogs envenomed by V. berus at admission, 12-24 hours postadmission, and 5-10 days postadmission. Blood was collected from dogs envenomed by B. arietans or N. annulifera at admission, and 12, 24, and 36 hours postadmission. Concentrations of cardiac troponin I (cTnI), a marker of myocardial injury, and C-reactive protein (CRP), a marker of systemic inflammation, were measured in each blood sample. Evidence of myocardial injury was found in 58% of dogs envenomed by V. berus at one or more time points. A significant correlation between cTnI and CRP concentrations was found at all time points. Evidence of myocardial injury was found in 80% of dogs envenomed by B. arietans at one or more time points; however, no correlation was found between cTnI and CRP concentrations. Evidence of myocardial injury was found in 67% of dogs envenomed by N. annulifera at one or more time points. A significant correlation between cTnI and CRP concentrations was found at admission, but not at other time points. Myocardial injury frequently occurred in dogs with snake envenomation. While the degree of systemic inflammation was significantly correlated with degree of myocardial injury in V. berus envenomation at all time points, this was not the case in dogs envenomed by N. annulifera or B. arietans. This could be due to differences in the toxic substances of the snake venoms or to differences in the cytokines induced by the venom toxins. © Veterinary Emergency and Critical Care Society 2013.

  11. Diversity of human small intestinal Streptococcus and Veillonella populations.

    PubMed

    van den Bogert, Bartholomeus; Erkus, Oylum; Boekhorst, Jos; de Goffau, Marcus; Smid, Eddy J; Zoetendal, Erwin G; Kleerebezem, Michiel

    2013-08-01

    Molecular and cultivation approaches were employed to study the phylogenetic richness and temporal dynamics of Streptococcus and Veillonella populations in the small intestine. Microbial profiling of human small intestinal samples collected from four ileostomy subjects at four time points displayed abundant populations of Streptococcus spp. most affiliated with S. salivarius, S. thermophilus, and S. parasanguinis, as well as Veillonella spp. affiliated with V. atypica, V. parvula, V. dispar, and V. rogosae. Relative abundances varied per subject and time of sampling. Streptococcus and Veillonella isolates were cultured using selective media from ileostoma effluent samples collected at two time points from a single subject. The richness of the Streptococcus and Veillonella isolates was assessed at species and strain level by 16S rRNA gene sequencing and genetic fingerprinting, respectively. A total of 160 Streptococcus and 37 Veillonella isolates were obtained. Genetic fingerprinting differentiated seven Streptococcus lineages from ileostoma effluent, illustrating the strain richness within this ecosystem. The Veillonella isolates were represented by a single phylotype. Our study demonstrated that the small intestinal Streptococcus populations displayed considerable changes over time at the genetic lineage level because only representative strains of a single Streptococcus lineage could be cultivated from ileostoma effluent at both time points. © 2013 Federation of European Microbiological Societies. Published by John Wiley & Sons Ltd. All rights reserved.

  12. Looking for Off-Fault Deformation and Measuring Strain Accumulation During the Past 70 years on a Portion of the Locked San Andreas Fault

    NASA Astrophysics Data System (ADS)

    Vadman, M.; Bemis, S. P.

    2017-12-01

    Even at high tectonic rates, detection of possible off-fault plastic/aseismic deformation and variability in far-field strain accumulation requires high spatial resolution data and likely decades of measurements. Due to the influence that variability in interseismic deformation could have on the timing, size, and location of future earthquakes and the calculation of modern geodetic estimates of strain, we attempt to use historical aerial photographs to constrain deformation through time across a locked fault. Modern photo-based 3D reconstruction techniques facilitate the creation of dense point clouds from historical aerial photograph collections. We use these tools to generate a time series of high-resolution point clouds that span 10-20 km across the Carrizo Plain segment of the San Andreas fault. We chose this location due to the high tectonic rates along the San Andreas fault and lack of vegetation, which may obscure tectonic signals. We use ground control points collected with differential GPS to establish scale and georeference the aerial photograph-derived point clouds. With a locked fault assumption, point clouds can be co-registered (to one another and/or the 1.7 km wide B4 airborne lidar dataset) along the fault trace to calculate relative displacements away from the fault. We use CloudCompare to compute 3D surface displacements, which reflect the interseismic strain accumulation that occurred in the time interval between photo collections. As expected, we do not observe clear surface displacements along the primary fault trace in our comparisons of the B4 lidar data against the aerial photograph-derived point clouds. However, there may be small scale variations within the lidar swath area that represent near-fault plastic deformation. With large-scale historical photographs available for the Carrizo Plain extending back to at least the 1940s, we can potentially sample nearly half the interseismic period since the last major earthquake on this portion of this fault (1857). Where sufficient aerial photograph coverage is available, this approach has the potential to illuminate complex fault zone processes for this and other major strike-slip faults.

  13. Full impact of laboratory information system requires direct use by clinical staff: cluster randomized controlled trial.

    PubMed

    Blaya, Joaquín A; Shin, Sonya; Contreras, Carmen; Yale, Gloria; Suarez, Carmen; Asencios, Luis; Kim, Jihoon; Rodriguez, Pablo; Cegielski, Peter; Fraser, Hamish S F

    2011-01-01

    To evaluate the time to communicate laboratory results to health centers (HCs) between the e-Chasqui web-based information system and the pre-existing paper-based system. Cluster randomized controlled trial in 78 HCs in Peru. In the intervention group, 12 HCs had web access to results via e-Chasqui (point-of-care HCs) and forwarded results to 17 peripheral HCs. In the control group, 22 point-of-care HCs received paper results directly and forwarded them to 27 peripheral HCs. Baseline data were collected for 15 months. Post-randomization data were collected for at least 2 years. Comparisons were made between intervention and control groups, stratified by point-of-care versus peripheral HCs. For point-of-care HCs, the intervention group took less time to receive drug susceptibility tests (DSTs) (median 9 vs 16 days, p<0.001) and culture results (4 vs 8 days, p<0.001) and had a lower proportion of 'late' DSTs taking >60 days to arrive (p<0.001) than the control. For peripheral HCs, the intervention group had similar communication times for DST (median 22 vs 19 days, p=0.30) and culture (10 vs 9 days, p=0.10) results, as well as proportion of 'late' DSTs (p=0.57) compared with the control. Only point-of-care HCs with direct access to the e-Chasqui information system had reduced communication times and fewer results with delays of >2 months. Peripheral HCs had no benefits from the system. This suggests that health establishments should have point-of-care access to reap the benefits of electronic laboratory reporting.

  14. Full impact of laboratory information system requires direct use by clinical staff: cluster randomized controlled trial

    PubMed Central

    Shin, Sonya; Contreras, Carmen; Yale, Gloria; Suarez, Carmen; Asencios, Luis; Kim, Jihoon; Rodriguez, Pablo; Cegielski, Peter; Fraser, Hamish S F

    2010-01-01

    Objective To evaluate the time to communicate laboratory results to health centers (HCs) between the e-Chasqui web-based information system and the pre-existing paper-based system. Methods Cluster randomized controlled trial in 78 HCs in Peru. In the intervention group, 12 HCs had web access to results via e-Chasqui (point-of-care HCs) and forwarded results to 17 peripheral HCs. In the control group, 22 point-of-care HCs received paper results directly and forwarded them to 27 peripheral HCs. Baseline data were collected for 15 months. Post-randomization data were collected for at least 2 years. Comparisons were made between intervention and control groups, stratified by point-of-care versus peripheral HCs. Results For point-of-care HCs, the intervention group took less time to receive drug susceptibility tests (DSTs) (median 9 vs 16 days, p<0.001) and culture results (4 vs 8 days, p<0.001) and had a lower proportion of ‘late’ DSTs taking >60 days to arrive (p<0.001) than the control. For peripheral HCs, the intervention group had similar communication times for DST (median 22 vs 19 days, p=0.30) and culture (10 vs 9 days, p=0.10) results, as well as proportion of ‘late’ DSTs (p=0.57) compared with the control. Conclusions Only point-of-care HCs with direct access to the e-Chasqui information system had reduced communication times and fewer results with delays of >2 months. Peripheral HCs had no benefits from the system. This suggests that health establishments should have point-of-care access to reap the benefits of electronic laboratory reporting. PMID:21113076

  15. Simulating living organisms with populations of point vortices

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schmieder, R.W.

    1995-07-01

    The author has found that time-averaged images of small populations of point vortices can exhibit motions suggestive of the behavior of individual organisms. As an example, the author shows that collections of point vortices confined in a box and subjected to heating can generate patterns that are broadly similar to interspecies defense in certain sea anemones. It is speculated that other simple dynamical systems can be found to produce similar complex organism-like behavior.

  16. Method for attaining fennel (Foeniculum vulgare Mill.) seed oil fractions with different composition and antioxidant capacity

    USDA-ARS?s Scientific Manuscript database

    Fennel (Foeniculum vulgare Mill.) is cultivated for its seeds and foliage, which contain essential oil. We hypothesized that the collection of fennel seed oil at different time points during the distillation process may result in fennel oil with distinct composition and bioactivity. We collected ess...

  17. Impact of urine preservation methods and duration of storage on measured levels of environmental contaminants.

    PubMed

    Hoppin, Jane A; Ulmer, Ross; Calafat, Antonia M; Barr, Dana B; Baker, Susan V; Meltzer, Helle M; Rønningen, Kjersti S

    2006-01-01

    Collection of urine samples in human studies involves choices regarding shipping, sample preservation, and storage that may ultimately influence future analysis. As more studies collect and archive urine samples to evaluate environmental exposures in the future, we were interested in assessing the impact of urine preservative, storage temperature, and time since collection on nonpersistent contaminants in urine samples. In spiked urine samples stored in three types of urine vacutainers (no preservative, boric acid, and chlorhexidine), we measured five groups of contaminants to assess the levels of these analytes at five time points (0, 24, 48, and 72 h, and 1 week) and at two temperatures (room temperature and 4 degrees C). The target chemicals were bisphenol A (BPA), metabolites of organophosphate (OP), carbamate, and pyrethroid insecticides, chlorinated phenols, and phthalate monoesters, and were measured using five different mass spectrometry-based methods. Three samples were analyzed at each time point, with the exception of BPA. Repeated measures analysis of variance was used to evaluate effects of storage time, temperature, and preservative. Stability was summarized with percent change in mean concentration from time 0. In general, most analytes were stable under all conditions with changes in mean concentration over time, temperature, and preservative being generally less than 20%, with the exception of the OP metabolites in the presence of boric acid. The effect of storage temperature was less important than time since collection. The precision of the laboratory measurements was high allowing us to observe small differences, which may not be important when categorizing individuals into broader exposure groups.

  18. Evaluation of salivary melatonin measurements for Dim Light Melatonin Onset calculations in patients with possible sleep-wake rhythm disorders.

    PubMed

    Keijzer, Henry; Smits, Marcel G; Peeters, Twan; Looman, Caspar W N; Endenburg, Silvia C; Gunnewiek, Jacqueline M T Klein

    2011-08-17

    Dim Light Melatonin Onset (DLMO) can be calculated within a 5-point partial melatonin curve in saliva collected at home. We retrospectively analyzed the patient melatonin measurements sample size of the year 2008 to evaluate these DLMO calculations and studied the correlation between diary or polysomnography (PSG) sleep onset and DLMO. Patients completed an online questionnaire. If this questionnaire pointed to a possible Delayed Sleep Phase Disorder (DSPD), saliva collection devices were sent to the patient. Collection occurred at 5 consecutive hours. Melatonin concentration was measured with a radioimmunoassay and DLMO was defined as the time at which the melatonin concentration in saliva reaches 4 pg/mL. Sleep onset time was retrieved from an online one-week sleep diary and/or one-night PSG. A total of 1848 diagnostic 5-point curves were obtained. DLMO could be determined in 76.2% (n=1408). DLMO significantly differed between different age groups and increased with age. Pearson correlations (r) between DLMO and sleep onset measured with PSG or with a diary were 0.514 (p=<0.001, n=54) and 0.653 (p=0.002, n=20) respectively. DLMO can be reliably measured in saliva that is conveniently collected at home. DLMO correlates moderately with sleep onset. Copyright © 2011 Elsevier B.V. All rights reserved.

  19. Populating a Control Point Database: A cooperative effort between the USGS, Grand Canyon Monitoring and Research Center and the Grand Canyon Youth Organization

    NASA Astrophysics Data System (ADS)

    Brown, K. M.; Fritzinger, C.; Wharton, E.

    2004-12-01

    The Grand Canyon Monitoring and Research Center measures the effects of Glen Canyon Dam operations on the resources along the Colorado River from Glen Canyon Dam to Lake Mead in support of the Grand Canyon Adaptive Management Program. Control points are integral for geo-referencing the myriad of data collected in the Grand Canyon including aerial photography, topographic and bathymetric data used for classification and change-detection analysis of physical, biologic and cultural resources. The survey department has compiled a list of 870 control points installed by various organizations needing to establish a consistent reference for data collected at field sites along the 240 mile stretch of Colorado River in the Grand Canyon. This list is the foundation for the Control Point Database established primarily for researchers, to locate control points and independently geo-reference collected field data. The database has the potential to be a valuable mapping tool for assisting researchers to easily locate a control point and reduce the occurrance of unknowingly installing new control points within close proximity of an existing control point. The database is missing photographs and accurate site description information. Current site descriptions do not accurately define the location of the point but refer to the project that used the point, or some other interesting fact associated with the point. The Grand Canyon Monitoring and Research Center (GCMRC) resolved this problem by turning the data collection effort into an educational exercise for the participants of the Grand Canyon Youth organization. Grand Canyon Youth is a non-profit organization providing experiential education for middle and high school aged youth. GCMRC and the Grand Canyon Youth formed a partnership where GCMRC provided the logistical support, equipment, and training to conduct the field work, and the Grand Canyon Youth provided the time and personnel to complete the field work. Two data collection efforts were conducted during the 2004 summer allowing 40 youth the opportunity to contribute valuable information to the Control Point Database. This information included: verification of point existence, photographs, accurate site descriptions concisely describing the location of the point, how to reach the point, the specific point location and detailed bearings to visible and obvious land marks. The youth learned to locate themselves and find the points using 1:1000 airphotos, write detailed site descriptions, take bearings with a compass, measure vertical and horizontal distances, and use a digital camera. The youth found information for 252 control points (29% of the total points).

  20. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ottesen, Elizabeth A.; Marin, Roman; Preston, Christina M.

    Planktonic microbial activity and community structure is dynamic, and can change dramatically on time scales of hours to days. Yet for logistical reasons, this temporal scale is typically undersampled in the marine environment. In order to facilitate higher-resolution, long-term observation of microbial diversity and activity, we developed a protocol for automated collection and fixation of marine microbes using the Environmental Sample Processor (ESP) platform. The protocol applies a preservative (RNALater) to cells collected on filters, for long-term storage and preservation of total cellular RNA. Microbial samples preserved using this protocol yielded high-quality RNA after 30 days of storage at roommore » temperature, or onboard the ESP at in situ temperatures. Pyrosequencing of complementary DNA libraries generated from ESP-collected and preserved samples yielded transcript abundance profiles nearly indistinguishable from those derived from conventionally treated replicate samples. To demonstrate the utility of the method, we used a moored ESP to remotely and autonomously collect Monterey Bay seawater for metatranscriptomic analysis. Community RNA was extracted and pyrosequenced from samples collected at four time points over the course of a single day. In all four samples, the oxygenic photoautotrophs were predominantly eukaryotic, while the bacterial community was dominated by Polaribacter-like Flavobacteria and a Rhodobacterales bacterium sharing high similarity with Rhodobacterales sp. HTCC2255. However, each time point was associated with distinct species abundance and gene transcript profiles. These laboratory and field tests confirmed that autonomous collection and preservation is a feasible and useful approach for characterizing the expressed genes and environmental responses of marine microbial communities.« less

  1. [Establishment of model of traditional Chinese medicine injections post-marketing safety monitoring].

    PubMed

    Guo, Xin-E; Zhao, Yu-Bin; Xie, Yan-Ming; Zhao, Li-Cai; Li, Yan-Feng; Hao, Zhe

    2013-09-01

    To establish a nurse based post-marketing safety surveillance model for traditional Chinese medicine injections (TCMIs). A TCMIs safety monitoring team and a research hospital team engaged in the research, monitoring processes, and quality control processes were established, in order to achieve comprehensive, timely, accurate and real-time access to research data, to eliminate errors in data collection. A triage system involving a study nurse, as the first point of contact, clinicians and clinical pharmacists was set up in a TCM hospital. Following the specified workflow involving labeling of TCM injections and using improved monitoring forms it was found that there were no missing reports at the ratio of error was zero. A research nurse as the first and main point of contact in post-marketing safety monitoring of TCM as part of a triage model, ensures that research data collected has the characteristics of authenticity, accuracy, timeliness, integrity, and eliminate errors during the process of data collection. Hospital based monitoring is a robust and operable process.

  2. Stereo multiplexed holographic particle image velocimeter

    DOEpatents

    Adrian, Ronald J.; Barnhart, Donald H.; Papen, George A.

    1996-01-01

    A holographic particle image velocimeter employs stereoscopic recording of particle images, taken from two different perspectives and at two distinct points in time for each perspective, on a single holographic film plate. The different perspectives are provided by two optical assemblies, each including a collecting lens, a prism and a focusing lens. Collimated laser energy is pulsed through a fluid stream, with elements carried in the stream scattering light, some of which is collected by each collecting lens. The respective focusing lenses are configured to form images of the scattered light near the holographic plate. The particle images stored on the plate are reconstructed using the same optical assemblies employed in recording, by transferring the film plate and optical assemblies as a single integral unit to a reconstruction site. At the reconstruction site, reconstruction beams, phase conjugates of the reference beams used in recording the image, are directed to the plate, then selectively through either one of the optical assemblies, to form an image reflecting the chosen perspective at the two points in time.

  3. Stereo multiplexed holographic particle image velocimeter

    DOEpatents

    Adrian, R.J.; Barnhart, D.H.; Papen, G.A.

    1996-08-20

    A holographic particle image velocimeter employs stereoscopic recording of particle images, taken from two different perspectives and at two distinct points in time for each perspective, on a single holographic film plate. The different perspectives are provided by two optical assemblies, each including a collecting lens, a prism and a focusing lens. Collimated laser energy is pulsed through a fluid stream, with elements carried in the stream scattering light, some of which is collected by each collecting lens. The respective focusing lenses are configured to form images of the scattered light near the holographic plate. The particle images stored on the plate are reconstructed using the same optical assemblies employed in recording, by transferring the film plate and optical assemblies as a single integral unit to a reconstruction site. At the reconstruction site, reconstruction beams, phase conjugates of the reference beams used in recording the image, are directed to the plate, then selectively through either one of the optical assemblies, to form an image reflecting the chosen perspective at the two points in time. 13 figs.

  4. Controversies and Decision Making in Difficult Economic Times. New Directions for Community Colleges, Number 53.

    ERIC Educational Resources Information Center

    Dziech, Billie Wright, Ed.

    1986-01-01

    The essays in this collection provide contrasting points of view on a number of community college issues that have become more pressing during periods of economic constraint. The volume contains: (1) "Part-Time Faculty: The Value of the Resource," by William R. C. Munsey; (2) "Part-Time Faculty, Full-Time Problems," by David Hartleb and William…

  5. Student Mobility, Dosage, and Principal Stratification in School-Based RCTs

    ERIC Educational Resources Information Center

    Schochet, Peter Z.

    2013-01-01

    In school-based randomized control trials (RCTs), a common design is to follow student cohorts over time. For such designs, education researchers usually focus on the place-based (PB) impact parameter, which is estimated using data collected on all students enrolled in the study schools at each data collection point. A potential problem with this…

  6. Expanded stream gauging includes groundwater data and trends

    USGS Publications Warehouse

    Constantz, James E.; Barlow, Jeannie R.; Eddy-Miller, Cheryl; Caldwell, Rodney R.; Wheeler, Jerrod D.

    2012-01-01

    Population growth has increased water scarcity to the point that documenting current amounts of worldwide water resources is now as critical as any data collection in the Earth sciences. As a key element of this data collection, stream gauges yield continuous hydrologic information and document long-term trends, recording high-frequency hydrologic information over decadal to centennial time frames.

  7. 77 FR 27854 - Information Collection Activities: Submission for the Office of Management and Budget (OMB...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-11

    ... hours. Frequency of Collection: There will be three survey waves at each of the five community sites. A telephone survey and bar survey will be conducted during each survey wave, with each respondent interviewed... three different points in time during the one-year program period. The telephone survey wave in each...

  8. A hierarchical model combining distance sampling and time removal to estimate detection probability during avian point counts

    USGS Publications Warehouse

    Amundson, Courtney L.; Royle, J. Andrew; Handel, Colleen M.

    2014-01-01

    Imperfect detection during animal surveys biases estimates of abundance and can lead to improper conclusions regarding distribution and population trends. Farnsworth et al. (2005) developed a combined distance-sampling and time-removal model for point-transect surveys that addresses both availability (the probability that an animal is available for detection; e.g., that a bird sings) and perceptibility (the probability that an observer detects an animal, given that it is available for detection). We developed a hierarchical extension of the combined model that provides an integrated analysis framework for a collection of survey points at which both distance from the observer and time of initial detection are recorded. Implemented in a Bayesian framework, this extension facilitates evaluating covariates on abundance and detection probability, incorporating excess zero counts (i.e. zero-inflation), accounting for spatial autocorrelation, and estimating population density. Species-specific characteristics, such as behavioral displays and territorial dispersion, may lead to different patterns of availability and perceptibility, which may, in turn, influence the performance of such hierarchical models. Therefore, we first test our proposed model using simulated data under different scenarios of availability and perceptibility. We then illustrate its performance with empirical point-transect data for a songbird that consistently produces loud, frequent, primarily auditory signals, the Golden-crowned Sparrow (Zonotrichia atricapilla); and for 2 ptarmigan species (Lagopus spp.) that produce more intermittent, subtle, and primarily visual cues. Data were collected by multiple observers along point transects across a broad landscape in southwest Alaska, so we evaluated point-level covariates on perceptibility (observer and habitat), availability (date within season and time of day), and abundance (habitat, elevation, and slope), and included a nested point-within-transect and park-level effect. Our results suggest that this model can provide insight into the detection process during avian surveys and reduce bias in estimates of relative abundance but is best applied to surveys of species with greater availability (e.g., breeding songbirds).

  9. User's manual for the Graphical Constituent Loading Analysis System (GCLAS)

    USGS Publications Warehouse

    Koltun, G.F.; Eberle, Michael; Gray, J.R.; Glysson, G.D.

    2006-01-01

    This manual describes the Graphical Constituent Loading Analysis System (GCLAS), an interactive cross-platform program for computing the mass (load) and average concentration of a constituent that is transported in stream water over a period of time. GCLAS computes loads as a function of an equal-interval streamflow time series and an equal- or unequal-interval time series of constituent concentrations. The constituent-concentration time series may be composed of measured concentrations or a combination of measured and estimated concentrations. GCLAS is not intended for use in situations where concentration data (or an appropriate surrogate) are collected infrequently or where an appreciable amount of the concentration values are censored. It is assumed that the constituent-concentration time series used by GCLAS adequately represents the true time-varying concentration. Commonly, measured constituent concentrations are collected at a frequency that is less than ideal (from a load-computation standpoint), so estimated concentrations must be inserted in the time series to better approximate the expected chemograph. GCLAS provides tools to facilitate estimation and entry of instantaneous concentrations for that purpose. Water-quality samples collected for load computation frequently are collected in a single vertical or at single point in a stream cross section. Several factors, some of which may vary as a function of time and (or) streamflow, can affect whether the sample concentrations are representative of the mean concentration in the cross section. GCLAS provides tools to aid the analyst in assessing whether concentrations in samples collected in a single vertical or at single point in a stream cross section exhibit systematic bias with respect to the mean concentrations. In cases where bias is evident, the analyst can construct coefficient relations in GCLAS to reduce or eliminate the observed bias. GCLAS can export load and concentration data in formats suitable for entry into the U.S. Geological Survey's National Water Information System. GCLAS can also import and export data in formats that are compatible with various commonly used spreadsheet and statistics programs.

  10. Multi-input and binary reproducible, high bandwidth floating point adder in a collective network

    DOEpatents

    Chen, Dong; Eisley, Noel A.; Heidelberger, Philip; Steinmacher-Burow, Burkhard

    2016-11-15

    To add floating point numbers in a parallel computing system, a collective logic device receives the floating point numbers from computing nodes. The collective logic devices converts the floating point numbers to integer numbers. The collective logic device adds the integer numbers and generating a summation of the integer numbers. The collective logic device converts the summation to a floating point number. The collective logic device performs the receiving, the converting the floating point numbers, the adding, the generating and the converting the summation in one pass. One pass indicates that the computing nodes send inputs only once to the collective logic device and receive outputs only once from the collective logic device.

  11. 12 CFR 263.12 - Construction of time limits.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... Express Mail delivery, or first class, registered, or certified mail, upon deposit in or delivery to an appropriate point of collection; (iii) In the case of transmission by electronic media, as specified by the... time limits are calculated as follows: (1) If service is made by first class, registered, or certified...

  12. 12 CFR 509.12 - Construction of time limits.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... delivery, or first class, registered, or certified mail, upon deposit in or delivery to an appropriate point of collection; or (iii) In the case of transmission by electronic media, as specified by the... applicable time limits are calculated as follows: (1) If service is made by first class, registered, or...

  13. Cardiovascular point of care initiative: enhancements in clinical data management.

    PubMed

    Robertson, Jane

    2003-01-01

    The Department of Cardiovascular Surgery at East Alabama Medical Center (EAMC) initiated a program in 1996 to improve the quality and usefulness of clinical outcomes data. After years of using a commercial vendor product and enduring a tedious collection process, the department decided to develop its own tools to support quality improvement efforts. Using a hand-held personal data assistant (PDA), the team developed tools that allowed ongoing data collection at the point of care delivery. The tools and methods facilitated the collection of real time, accurate information that allowed EAMC to participate in multiple clinical quality initiatives. The ability to conduct rapid-cycle performance improvement studies propelled EAMC's Cardiovascular Surgery Program into the Top 100 as recognized by HCIA, now Solucient, for 3 consecutive years (1999-2001). This report will describe the evolution of the data collection process as well as the quality improvements that resulted.

  14. The impact of time and field conditions on brown bear (Ursus arctos) faecal DNA amplification

    USGS Publications Warehouse

    Murphy, M.A.; Kendall, K.C.; Robinson, A.; Waits, L.P.

    2007-01-01

    To establish longevity of faecal DNA samples under varying summer field conditions, we collected 53 faeces from captive brown bears (Ursus arctos) on a restricted vegetation diet. Each faeces was divided, and one half was placed on a warm, dry field site while the other half was placed on a cool, wet field site on Moscow Mountain, Idaho, USA. Temperature, relative humidity, and dew point data were collected on each site, and faeces were sampled for DNA extraction at <1, 3, 6, 14, 30, 45, and 60 days. Faecal DNA sample viability was assessed by attempting PCR amplification of a mitochondrial DNA (mtDNA) locus (???150 bp) and a nuclear DNA (nDNA) microsatellite locus (180-200 bp). Time in the field, temperature, and dew point impacted mtDNA and nDNA amplification success with the greatest drop in success rates occurring between 1 and 3 days. In addition, genotyping errors significantly increased over time at both field sites. Based on these results, we recommend collecting samples at frequent transect intervals and focusing sampling efforts during drier portions of the year when possible. ?? 2007 Springer Science+Business Media, Inc.

  15. Multi-input and binary reproducible, high bandwidth floating point adder in a collective network

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chen, Dong; Eisley, Noel A; Heidelberger, Philip

    To add floating point numbers in a parallel computing system, a collective logic device receives the floating point numbers from computing nodes. The collective logic devices converts the floating point numbers to integer numbers. The collective logic device adds the integer numbers and generating a summation of the integer numbers. The collective logic device converts the summation to a floating point number. The collective logic device performs the receiving, the converting the floating point numbers, the adding, the generating and the converting the summation in one pass. One pass indicates that the computing nodes send inputs only once to themore » collective logic device and receive outputs only once from the collective logic device.« less

  16. Four-body trajectory optimization

    NASA Technical Reports Server (NTRS)

    Pu, C. L.; Edelbaum, T. N.

    1973-01-01

    A collection of typical three-body trajectories from the L1 libration point on the sun-earth line to the earth is presented. These trajectories in the sun-earth system are grouped into four distinct families which differ in transfer time and delta V requirements. Curves showing the variations of delta V with respect to transfer time, and typical two and three-impulse primer vector histories, are included. The development of a four-body trajectory optimization program to compute fuel optimal trajectories between the earth and a point in the sun-earth-moon system are also discussed. Methods for generating fuel optimal two-impulse trajectories which originate at the earth or a point in space, and fuel optimal three-impulse trajectories between two points in space, are presented. A brief qualitative comparison of these methods is given. An example of a four-body two-impulse transfer from the Li libration point to the earth is included.

  17. Statistical prescission point model of fission fragment angular distributions

    NASA Astrophysics Data System (ADS)

    John, Bency; Kataria, S. K.

    1998-03-01

    In light of recent developments in fission studies such as slow saddle to scission motion and spin equilibration near the scission point, the theory of fission fragment angular distribution is examined and a new statistical prescission point model is developed. The conditional equilibrium of the collective angular bearing modes at the prescission point, which is guided mainly by their relaxation times and population probabilities, is taken into account in the present model. The present model gives a consistent description of the fragment angular and spin distributions for a wide variety of heavy and light ion induced fission reactions.

  18. The genomic response of skeletal muscle to methylprednisolone using microarrays: tailoring data mining to the structure of the pharmacogenomic time series

    PubMed Central

    DuBois, Debra C; Piel, William H; Jusko, William J

    2008-01-01

    High-throughput data collection using gene microarrays has great potential as a method for addressing the pharmacogenomics of complex biological systems. Similarly, mechanism-based pharmacokinetic/pharmacodynamic modeling provides a tool for formulating quantitative testable hypotheses concerning the responses of complex biological systems. As the response of such systems to drugs generally entails cascades of molecular events in time, a time series design provides the best approach to capturing the full scope of drug effects. A major problem in using microarrays for high-throughput data collection is sorting through the massive amount of data in order to identify probe sets and genes of interest. Due to its inherent redundancy, a rich time series containing many time points and multiple samples per time point allows for the use of less stringent criteria of expression, expression change and data quality for initial filtering of unwanted probe sets. The remaining probe sets can then become the focus of more intense scrutiny by other methods, including temporal clustering, functional clustering and pharmacokinetic/pharmacodynamic modeling, which provide additional ways of identifying the probes and genes of pharmacological interest. PMID:15212590

  19. Quality in practice: integrating routine collection of patient language data into hospital practice.

    PubMed

    Hudelson, Patricia; Dominicé Dao, Melissa; Durieux-Paillard, Sophie

    2013-09-01

    Timely identification of patients' language needs can facilitate the provision of language-appropriate services and contribute to quality of care, clinical outcomes and patient satisfaction. At the University Hospitals of Geneva, Switzerland, timely organization of interpreter services was hindered by the lack of systematic patient language data collection. We explored the feasibility and acceptability of a procedure for collecting patient language data at the first point of contact, prior to its hospital-wide implementation. During a one-week period, receptionists and triage nurses in eight clinical services tested a new procedure for collecting patient language data. Patients were asked to identify their primary language and other languages they would be comfortable speaking with their doctor. Staff noted patients' answers on a paper form and provided informal feedback on their experience with the procedure. Registration staff encountered few difficulties collecting patient language data and thought that the two questions could easily be incorporated into existing administrative routines. Following the pilot test, two language fields with scroll-down language menus were added to the electronic patient file, and the subsequent filling-in of these fields has been rapid and hospital wide. Our experience suggests that routine collection of patient language data at first point of contact is both feasible and acceptable and that involving staff in a pilot project may facilitate hospital-wide implementation. Future efforts should focus on exploring the sensitivity and specificity of the proposed questions, as well as the impact of data collection on interpreter use.

  20. Using blue mussels (Mytilus spp.) as biosentinels of Cryptosporidium spp. and Toxoplasma gondii contamination in marine aquatic environments

    USDA-ARS?s Scientific Manuscript database

    Methods to monitor microbial contamination typically involve collecting discrete samples at specific time-points and analyzing for a single contaminant. While informative, many of these methods suffer from poor recovery rates and only provide a snapshot of the microbial load at the time of collectio...

  1. Using smartphones to collect time-activity data for long-term personal-level air pollution exposure assessment.

    PubMed

    Glasgow, Mark L; Rudra, Carole B; Yoo, Eun-Hye; Demirbas, Murat; Merriman, Joel; Nayak, Pramod; Crabtree-Ide, Christina; Szpiro, Adam A; Rudra, Atri; Wactawski-Wende, Jean; Mu, Lina

    2016-06-01

    Because of the spatiotemporal variability of people and air pollutants within cities, it is important to account for a person's movements over time when estimating personal air pollution exposure. This study aimed to examine the feasibility of using smartphones to collect personal-level time-activity data. Using Skyhook Wireless's hybrid geolocation module, we developed "Apolux" (Air, Pollution, Exposure), an Android(TM) smartphone application designed to track participants' location in 5-min intervals for 3 months. From 42 participants, we compared Apolux data with contemporaneous data from two self-reported, 24-h time-activity diaries. About three-fourths of measurements were collected within 5 min of each other (mean=74.14%), and 79% of participants reporting constantly powered-on smartphones (n=38) had a daily average data collection frequency of <10 min. Apolux's degree of temporal resolution varied across manufacturers, mobile networks, and the time of day that data collection occurred. The discrepancy between diary points and corresponding Apolux data was 342.3 m (Euclidian distance) and varied across mobile networks. This study's high compliance and feasibility for data collection demonstrates the potential for integrating smartphone-based time-activity data into long-term and large-scale air pollution exposure studies.

  2. A device for recording automatic audio tape recording1

    PubMed Central

    Bernal, Martha E.; Gibson, Dennis M.; Williams, Donald E.; Pesses, Danny I.

    1971-01-01

    Adaptation of a commercially available timer for use as a means of operating an audio tape recorder several times during the day is described. Data on a mother's rates of commanding her children were collected via both physically present observer and recorder methods in order to compare the usefulness of the recordings with direct observation. There was a high positive relationship between observer-recorder command rates, with the observer rates being consistently higher, when data were collected via both methods simultaneously as well as at different points in time. ImagesFig. 1 PMID:16795287

  3. A device for recording automatic audio tape recording.

    PubMed

    Bernal, M E; Gibson, D M; Williams, D E; Pesses, D I

    1971-01-01

    Adaptation of a commercially available timer for use as a means of operating an audio tape recorder several times during the day is described. Data on a mother's rates of commanding her children were collected via both physically present observer and recorder methods in order to compare the usefulness of the recordings with direct observation. There was a high positive relationship between observer-recorder command rates, with the observer rates being consistently higher, when data were collected via both methods simultaneously as well as at different points in time.

  4. Comparison of a UAV-derived point-cloud to Lidar data at Haig Glacier, Alberta, Canada

    NASA Astrophysics Data System (ADS)

    Bash, E. A.; Moorman, B.; Montaghi, A.; Menounos, B.; Marshall, S. J.

    2016-12-01

    The use of unmanned aerial vehicles (UAVs) is expanding rapidly in glaciological research as a result of technological improvements that make UAVs a cost-effective solution for collecting high resolution datasets with relative ease. The cost and difficult access traditionally associated with performing fieldwork in glacial environments makes UAVs a particularly attractive tool. In the small, but growing, body of literature using UAVs in glaciology the accuracy of UAV data is tested through the comparison of a UAV-derived DEM to measured control points. A field campaign combining simultaneous lidar and UAV flights over Haig Glacier in April 2015, provided the unique opportunity to directly compare UAV data to lidar. The UAV was a six-propeller Mikrokopter carrying a Panasonic Lumix DMC-GF1 camera with a 12 Megapixel Live MOS sensor and Lumix G 20 mm lens flown at a height of 90 m, resulting in sub-centimetre ground resolution per image pixel. Lidar data collection took place April 20, while UAV flights were conducted April 20-21. A set of 65 control points were laid out and surveyed on the glacier surface on April 19 and 21 using a RTK GPS with a vertical uncertainty of 5 cm. A direct comparison of lidar points to these control points revealed a 9 cm offset between the control points and the lidar points on average, but the difference changed distinctly from points collected on April 19 versus those collected April 21 (7 cm and 12 cm). Agisoft Photoscan was used to create a point-cloud from imagery collected with the UAV and CloudCompare was used to calculate the difference between this and the lidar point cloud, revealing an average difference of less than 17 cm. This field campaign also highlighted some of the benefits and drawbacks of using a rotary UAV for glaciological research. The vertical takeoff and landing capabilities, combined with quick responsiveness and higher carrying capacity, make the rotary vehicle favourable for high-resolution photos when working in mountainous terrain. Battery life is limited, however, compared to fixed-wing vehicles, making it more difficult to cover large areas in a short time. This analysis shows that UAVs are able to fill an important role in the future of glaciological research, when research goals are balanced with instrument accuracy and UAV platform selection.

  5. The variability in Oxford hip and knee scores in the preoperative period: is there an ideal time to score?

    PubMed

    Quah, C; Holmes, D; Khan, T; Cockshott, S; Lewis, J; Stephen, A

    2018-01-01

    Background All NHS-funded providers are required to collect and report patient-reported outcome measures for hip and knee arthroplasty. Although there are established guidelines for timing such measures following arthroplasty, there are no specific time-points for collection in the preoperative period. The primary aim of this study was to identify whether there was a significant amount of variability in the Oxford hip and knee scores prior to surgical intervention when completed in the outpatient clinic at the time of listing for arthroplasty or when completed at the preoperative assessment clinic. Methods A prospective cohort study of patients listed for primary hip or knee arthroplasty was conducted. Patients were asked to fill in a preoperative Oxford score in the outpatient clinic at the time of listing. They were then invited to fill in the official outcome measures questionnaire at the preoperative assessment clinic. The postoperative Oxford score was then completed when the patient was seen again at their postoperative follow up in clinic. Results Of the total of 109 patients included in this study period, there were 18 (17%) who had a worse score of 4 or more points difference and 43 (39.4%) who had an improvement of 4 or more points difference when the scores were compared between time of listing at the outpatient and at the preoperative assessment clinic. There was a statistically significant difference (P = 0.0054) in the mean Oxford scores. Conclusions The results of our study suggest that there should be standardisation of timing for completing the preoperative patient-reported outcome measures.

  6. Bistatic Clutter Phenomenological Measurement/Model Development

    DTIC Science & Technology

    1988-05-01

    The objectives of this program are to provide technical analyses, test planning, and participation in the collection of near- simultaneous bistatic and...realistic clutter environment 2. Collect near- simultaneous monostatic and bistatic clutter data characteristic of relatively well-behaved terrain. The...FROM * waypoint at the same time and on the proper heading but this is not critical. The next waypoint or LINEUP waypoint is the first point where

  7. Laser altimetry simulator. Version 3.0: User's guide

    NASA Technical Reports Server (NTRS)

    Abshire, James B.; Mcgarry, Jan F.; Pacini, Linda K.; Blair, J. Bryan; Elman, Gregory C.

    1994-01-01

    A numerical simulator of a pulsed, direct detection laser altimeter has been developed to investigate the performance of space-based laser altimeters operating over surfaces with various height profiles. The simulator calculates the laser's optical intensity waveform as it propagates to and is reflected from the terrain surface and is collected by the receiver telescope. It also calculates the signal and noise waveforms output from the receiver's optical detector and waveform digitizer. Both avalanche photodiode and photomultiplier detectors may be selected. Parameters of the detected signal, including energy, the 50 percent rise-time point, the mean timing point, and the centroid, can be collected into histograms and statistics calculated after a number of laser firings. The laser altimeter can be selected to be fixed over the terrain at any altitude. Alternatively, it can move between laser shots to simulate the terrain profile measured with the laser altimeter.

  8. Automated DBS microsampling, microscale automation and microflow LC-MS for therapeutic protein PK.

    PubMed

    Zhang, Qian; Tomazela, Daniela; Vasicek, Lisa A; Spellman, Daniel S; Beaumont, Maribel; Shyong, BaoJen; Kenny, Jacqueline; Fauty, Scott; Fillgrove, Kerry; Harrelson, Jane; Bateman, Kevin P

    2016-04-01

    Reduce animal usage for discovery-stage PK studies for biologics programs using microsampling-based approaches and microscale LC-MS. We report the development of an automated DBS-based serial microsampling approach for studying the PK of therapeutic proteins in mice. Automated sample preparation and microflow LC-MS were used to enable assay miniaturization and improve overall assay throughput. Serial sampling of mice was possible over the full 21-day study period with the first six time points over 24 h being collected using automated DBS sample collection. Overall, this approach demonstrated comparable data to a previous study using single mice per time point liquid samples while reducing animal and compound requirements by 14-fold. Reduction in animals and drug material is enabled by the use of automated serial DBS microsampling for mice studies in discovery-stage studies of protein therapeutics.

  9. Effects of the H-3 Highway Stormwater Runoff on the Water Quality of Halawa Stream, Oahu, Hawaii, November 1998 to August 2004

    USGS Publications Warehouse

    Wolff, Reuben H.; Wong, Michael F.

    2008-01-01

    Since November 1998, water-quality data have been collected from the H-3 Highway Storm Drain C, which collects runoff from a 4-mi-long viaduct, and from Halawa Stream on Oahu, Hawaii. From January 2001 to August 2004, data were collected from the storm drain and four stream sites in the Halawa Stream drainage basin as part of the State of Hawaii Department of Transportation Storm Water Monitoring Program. Data from the stormwater monitoring program have been published in annual reports. This report uses these water-quality data to explore how the highway storm-drain runoff affects Halawa Stream and the factors that might be controlling the water quality in the drainage basin. In general, concentrations of nutrients, total dissolved solids, and total suspended solids were lower in highway runoff from Storm Drain C than at stream sites upstream and downstream of Storm Drain C. The opposite trend was observed for most trace metals, which generally occurred in higher concentrations in the highway runoff from Storm Drain C than in the samples collected from Halawa Stream. The absolute contribution from Storm Drain C highway runoff, in terms of total storm loads, was much smaller than at stations upstream and downstream, whereas the constituent yields (the relative contribution per unit drainage basin area) at Storm Drain C were comparable to or higher than storm yields at stations upstream and downstream. Most constituent concentrations and loads in stormwater runoff increased in a downstream direction. The timing of the storm sampling is an important factor controlling constituent concentrations observed in stormwater runoff samples. Automated point samplers were used to collect grab samples during the period of increasing discharge of the storm throughout the stormflow peak and during the period of decreasing discharge of the storm, whereas manually collected grab samples were generally collected during the later stages near the end of the storm. Grab samples were analyzed to determine concentrations and loads at a particular point in time. Flow-weighted time composite samples from the automated point samplers were analyzed to determine mean constituent concentrations or loads during a storm. Chemical analysis of individual grab samples from the automated point sampler at Storm Drain C demonstrated the ?first flush? phenomenon?higher constituent concentrations at the beginning of runoff events?for the trace metals cadmium, lead, zinc, and copper, whose concentrations were initially high during the period of increasing discharge and gradually decreased over the duration of the storm. Water-quality data from Storm Drain C and four stream sites were compared to the State of Hawaii Department of Health (HDOH) water-quality standards to determine the effects of highway storm runoff on the water quality of Halawa Stream. The geometric-mean standards and the 10- and 2-percent-of-the-time concentration standards for total nitrogen, nitrite plus nitrate, total phosphorus, total suspended solids, and turbidity were exceeded in many of the comparisons. However, these standards were not designed for stormwater sampling, in which constituent concentrations would be expected to increase for short periods of time. With the aim of enhancing the usefulness of the water-quality data, several modifications to the stormwater monitoring program are suggested. These suggestions include (1) the periodic analyzing of discrete samples from the automated point samplers over the course of a storm to get a clearer profile of the storm, from first flush to the end of the receding discharge; (2) adding an analysis of the dissolved fractions of metals to the sampling plan; (3) installation of an automatic sampler at Bridge 8 to enable sampling earlier in the storms; (4) a one-time sampling and analysis of soils upstream of Bridge 8 for base-line contaminant concentrations; (5) collection of samples from Halawa Stream during low-flow conditions

  10. Teen Dating Violence, Sexual Harassment, and Bullying Among Middle School Students: Examining Mediation and Moderated Mediation by Gender.

    PubMed

    Cutbush, Stacey; Williams, Jason; Miller, Shari

    2016-11-01

    This longitudinal study tested whether sexual harassment perpetration mediates the relationship between bullying perpetration and teen dating violence (TDV) perpetration and tested moderated mediation by assessing whether the developmental pathway varies by gender among middle school-aged youth. Although TDV has been associated with bullying and sexual harassment, the developmental relationship among all three behaviors has rarely been examined, especially by gender. The data were collected from one cohort of seventh grade middle school students (N = 612) from four schools. Students were surveyed every 6 months during seventh and eighth grades for a total of four waves of data collection. Structural equation modeling (SEM) was conducted to address the study aims, consisting of three stages: measurement models, mediation, and moderated mediation (otherwise known as Contrast of Mediated Effects). Results indicate no evidence of mediation. However, in the overall model, bullying and sexual harassment both emerged as significant predictors of TDV at a later time point. Among girls, only bullying significantly predicted TDV at a later time point, and, among boys, only sexual harassment significantly predicted TDV at a later time point. Prevention programs that target bullying and sexual harassment perpetration may reduce later perpetration of TDV. Further research is needed to disentangle the temporal relationships between these aggressive behaviors among youth.

  11. Cell-free DNA and telomere length among women undergoing in vitro fertilization treatment.

    PubMed

    Czamanski-Cohen, J; Sarid, O; Cwikel, J; Douvdevani, A; Levitas, E; Lunenfeld, E; Har-Vardi, I

    2015-11-01

    The current research is aimed at finding potential non-invasive bio-markers that will help us learn more about the mechanisms at play in failed assisted reproduction treatment. This exploratory pilot study examined the relationship between cell-free DNA (CFD) in plasma and telomere length in lymphocytes among women undergoing in vitro fertilization (IVF) and compared telomere length and CFD levels to a healthy control group. Blood of 20 women undergoing IVF was collected at three time points during the IVF cycle. We assessed the relationship between CFD and telomere length as well as controlling for morning cortisol levels. We also collected blood of 10 healthy controls at two time points (luteal and follicular phases of the menstrual cycle) and compared mean telomere length, CFD, and cortisol levels between the IVF patients and healthy controls. The results revealed an inverse relationship between CFD levels and telomere lengths at several time points that remained significant even after controlling for cortisol levels. Women undergoing IVF had statistically significant higher levels of CFD and shorter telomeres compared to healthy controls. The relationship between telomere length and CFD should be further explored in larger studies in order to uncover potential mechanisms that cause both shortened telomere length and elevated CFD in women undergoing IVF.

  12. A novel method for sampling the suspended sediment load in the tidal environment using bi-directional time-integrated mass-flux sediment (TIMS) samplers

    NASA Astrophysics Data System (ADS)

    Elliott, Emily A.; Monbureau, Elaine; Walters, Glenn W.; Elliott, Mark A.; McKee, Brent A.; Rodriguez, Antonio B.

    2017-12-01

    Identifying the source and abundance of sediment transported within tidal creeks is essential for studying the connectivity between coastal watersheds and estuaries. The fine-grained suspended sediment load (SSL) makes up a substantial portion of the total sediment load carried within an estuarine system and efficient sampling of the SSL is critical to our understanding of nutrient and contaminant transport, anthropogenic influence, and the effects of climate. Unfortunately, traditional methods of sampling the SSL, including instantaneous measurements and automatic samplers, can be labor intensive, expensive and often yield insufficient mass for comprehensive geochemical analysis. In estuaries this issue is even more pronounced due to bi-directional tidal flow. This study tests the efficacy of a time-integrated mass sediment sampler (TIMS) design, originally developed for uni-directional flow within the fluvial environment, modified in this work for implementation the tidal environment under bi-directional flow conditions. Our new TIMS design utilizes an 'L' shaped outflow tube to prevent backflow, and when deployed in mirrored pairs, each sampler collects sediment uniquely in one direction of tidal flow. Laboratory flume experiments using dye and particle image velocimetry (PIV) were used to characterize the flow within the sampler, specifically, to quantify the settling velocities and identify stagnation points. Further laboratory tests of sediment indicate that bidirectional TIMS capture up to 96% of incoming SSL across a range of flow velocities (0.3-0.6 m s-1). The modified TIMS design was tested in the field at two distinct sampling locations within the tidal zone. Single-time point suspended sediment samples were collected at high and low tide and compared to time-integrated suspended sediment samples collected by the bi-directional TIMS over the same four-day period. Particle-size composition from the bi-directional TIMS were representative of the array of single time point samples, but yielded greater mass, representative of flow and sediment-concentration conditions at the site throughout the deployment period. This work proves the efficacy of the modified bi-directional TIMS design, offering a novel tool for collection of suspended sediment in the tidally-dominated portion of the watershed.

  13. Predictive value of 3-month lumbar discectomy outcomes in the NeuroPoint-SD Registry.

    PubMed

    Whitmore, Robert G; Curran, Jill N; Ali, Zarina S; Mummaneni, Praveen V; Shaffrey, Christopher I; Heary, Robert F; Kaiser, Michael G; Asher, Anthony L; Malhotra, Neil R; Cheng, Joseph S; Hurlbert, John; Smith, Justin S; Magge, Subu N; Steinmetz, Michael P; Resnick, Daniel K; Ghogawala, Zoher

    2015-10-01

    The authors have established a multicenter registry to assess the efficacy and costs of common lumbar spinal procedures using prospectively collected outcomes. Collection of these data requires an extensive commitment of resources from each site. The aim of this study was to determine whether outcomes data from shorter-interval follow-up could be used to accurately estimate long-term outcome following lumbar discectomy. An observational prospective cohort study was completed at 13 academic and community sites. Patients undergoing single-level lumbar discectomy for treatment of disc herniation were included. SF-36 and Oswestry Disability Index (ODI) data were obtained preoperatively and at 1, 3, 6, and 12 months postoperatively. Quality-adjusted life year (QALY) data were calculated using SF-6D utility scores. Correlations among outcomes at each follow-up time point were tested using the Spearman rank correlation test. One hundred forty-eight patients were enrolled over 1 year. Their mean age was 46 years (49% female). Eleven patients (7.4%) required a reoperation by 1 year postoperatively. The overall 1-year follow-up rate was 80.4%. Lumbar discectomy was associated with significant improvements in ODI and SF-36 scores (p < 0.0001) and with a gain of 0.246 QALYs over the 1-year study period. The greatest gain occurred between baseline and 3-month follow-up and was significantly greater than improvements obtained between 3 and 6 months or 6 months and 1 year(p < 0.001). Correlations between 3-month, 6-month, and 1-year outcomes were similar, suggesting that 3-month data may be used to accurately estimate 1-year outcomes for patients who do not require a reoperation. Patients who underwent reoperation had worse outcomes scores and nonsignificant correlations at all time points. This national spine registry demonstrated successful collection of high-quality outcomes data for spinal procedures in actual practice. Three-month outcome data may be used to accurately estimate outcome at future time points and may lower costs associated with registry data collection. This registry effort provides a practical foundation for the acquisition of outcome data following lumbar discectomy.

  14. Evaluation of GPS Coverage for the X-33 Michael-6 Trajectory

    NASA Technical Reports Server (NTRS)

    Lundberg, John B.

    1998-01-01

    The onboard navigational system for the X-33 test flights will be based on the use of measurements collected from the Embedded Global Positioning System (GPS)/INS system. Some of the factors which will affect the quality of the GPS contribution to the navigational solution will be the number of pseudorange measurements collected at any instant in time, the distribution of the GPS satellites within the field of view, and the inherent noise level of the GPS receiver. The distribution of GPS satellites within the field of view of the receiver's antenna will depend on the receiver's position, the time of day, pointing direction of the antenna, and the effective cone angle of the antenna. The number of pseudorange measurements collected will depend upon these factors as well as the time required to lock onto a GPS satellite signal once the GPS satellite comes into the field of view of the antenna and the number of available receiver channels. The objective of this study is to evaluate the GPS coverage resulting from the proposed antenna pointing directions, the proposed antenna cone angles, and the effects due to the time of day for the X-33 Michael-6 trajectory from launch at Edwards AFB, California, to the start of the Terminal Area Energy Management (TAEM) phase on approach to Michael AAF, Utah.

  15. Job Demands, Burnout, and Teamwork in Healthcare Professionals Working in a General Hospital that Was Analysed At Two Points in Time.

    PubMed

    Mijakoski, Dragan; Karadzhinska-Bislimovska, Jovanka; Stoleski, Sasho; Minov, Jordan; Atanasovska, Aneta; Bihorac, Elida

    2018-04-15

    The purpose of the paper was to assess job demands, burnout, and teamwork in healthcare professionals (HPs) working in a general hospital that was analysed at two points in time with a time lag of three years. Time 1 respondents (N = 325) were HPs who participated during the first wave of data collection (2011). Time 2 respondents (N = 197) were HPs from the same hospital who responded at Time 2 (2014). Job demands, burnout, and teamwork were measured with Hospital Experience Scale, Maslach Burnout Inventory, and Hospital Survey on Patient Safety Culture, respectively. Significantly higher scores of emotional exhaustion (21.03 vs. 15.37, t = 5.1, p < 0.001), depersonalization (4.48 vs. 2.75, t = 3.8, p < 0.001), as well as organizational (2.51 vs. 2.34, t = 2.38, p = 0.017), emotional (2.46 vs. 2.25, t = 3.68, p < 0.001), and cognitive (2.82 vs. 2.64, t = 2.68, p = 0.008) job demands were found at Time 2. Teamwork levels were similar at both points in time (Time 1 = 3.84 vs. Time 2 = 3.84, t = 0.043, p = 0.97). Actual longitudinal study revealed significantly higher mean values of emotional exhaustion and depersonalization in 2014 that could be explained by significantly increased job demands between analysed points in time.

  16. Fast fingerprint database maintenance for indoor positioning based on UGV SLAM.

    PubMed

    Tang, Jian; Chen, Yuwei; Chen, Liang; Liu, Jingbin; Hyyppä, Juha; Kukko, Antero; Kaartinen, Harri; Hyyppä, Hannu; Chen, Ruizhi

    2015-03-04

    Indoor positioning technology has become more and more important in the last two decades. Utilizing Received Signal Strength Indicator (RSSI) fingerprints of Signals of OPportunity (SOP) is a promising alternative navigation solution. However, as the RSSIs vary during operation due to their physical nature and are easily affected by the environmental change, one challenge of the indoor fingerprinting method is maintaining the RSSI fingerprint database in a timely and effective manner. In this paper, a solution for rapidly updating the fingerprint database is presented, based on a self-developed Unmanned Ground Vehicles (UGV) platform NAVIS. Several SOP sensors were installed on NAVIS for collecting indoor fingerprint information, including a digital compass collecting magnetic field intensity, a light sensor collecting light intensity, and a smartphone which collects the access point number and RSSIs of the pre-installed WiFi network. The NAVIS platform generates a map of the indoor environment and collects the SOPs during processing of the mapping, and then the SOP fingerprint database is interpolated and updated in real time. Field tests were carried out to evaluate the effectiveness and efficiency of the proposed method. The results showed that the fingerprint databases can be quickly created and updated with a higher sampling frequency (5Hz) and denser reference points compared with traditional methods, and the indoor map can be generated without prior information. Moreover, environmental changes could also be detected quickly for fingerprint indoor positioning.

  17. Traffic data collection and anonymous vehicle detection using wireless sensor networks.

    DOT National Transportation Integrated Search

    2012-05-01

    New traffic sensing devices based on wireless sensing technologies were designed and tested. Such devices encompass a cost-effective, battery-free, and energy self-sustained architecture for real-time traffic measurement over distributed points in a ...

  18. Differential Perceptions of Bullying in the Schools: A Comparison of Student, Parent, Teacher, School Counselor, and Principal Reports

    ERIC Educational Resources Information Center

    Newgent, Rebecca A.; Lounsbery, Karyl L.; Keller, Elizabeth A.; Baker, Crystal R.; Cavell, Timothy A.; Boughfman, Erica M.

    2009-01-01

    Differential perceptions among students, parents, and school personnel in relation to peer victimization were examined. Data were collected at three time points. Students reported lower overall levels of peer victimization at Time 1 than did parents and lower levels of verbal victimization than did teachers. Students reported victimization…

  19. Simultaneous Detection and Tracking of Pedestrian from Panoramic Laser Scanning Data

    NASA Astrophysics Data System (ADS)

    Xiao, Wen; Vallet, Bruno; Schindler, Konrad; Paparoditis, Nicolas

    2016-06-01

    Pedestrian traffic flow estimation is essential for public place design and construction planning. Traditional data collection by human investigation is tedious, inefficient and expensive. Panoramic laser scanners, e.g. Velodyne HDL-64E, which scan surroundings repetitively at a high frequency, have been increasingly used for 3D object tracking. In this paper, a simultaneous detection and tracking (SDAT) method is proposed for precise and automatic pedestrian trajectory recovery. First, the dynamic environment is detected using two different methods, Nearest-point and Max-distance. Then, all the points on moving objects are transferred into a space-time (x, y, t) coordinate system. The pedestrian detection and tracking amounts to assign the points belonging to pedestrians into continuous trajectories in space-time. We formulate the point assignment task as an energy function which incorporates the point evidence, trajectory number, pedestrian shape and motion. A low energy trajectory will well explain the point observations, and have plausible trajectory trend and length. The method inherently filters out points from other moving objects and false detections. The energy function is solved by a two-step optimization process: tracklet detection in a short temporal window; and global tracklet association through the whole time span. Results demonstrate that the proposed method can automatically recover the pedestrians trajectories with accurate positions and low false detections and mismatches.

  20. Euthanasia Method for Mice in Rapid Time-Course Pulmonary Pharmacokinetic Studies

    PubMed Central

    Schoell, Adam R; Heyde, Bruce R; Weir, Dana E; Chiang, Po-Chang; Hu, Yiding; Tung, David K

    2009-01-01

    To develop a means of euthanasia to support rapid time-course pharmacokinetic studies in mice, we compared retroorbital and intravenous lateral tail vein injection of ketamine–xylazine with regard to preparation time, utility, tissue distribution, and time to onset of euthanasia. Tissue distribution and time to onset of euthanasia did not differ between administration methods. However, retroorbital injection could be performed more rapidly than intravenous injection and was considered to be a technically simple and superior alternative for mouse euthanasia. Retroorbital ketamine–xylazine, CO2 gas, and intraperitoneal pentobarbital then were compared as euthanasia agents in a rapid time-point pharmacokinetic study. Retroorbital ketamine–xylazine was the most efficient and consistent of the 3 methods, with an average time to death of approximately 5 s after injection. In addition, euthanasia by retroorbital ketamine–xylazine enabled accurate sample collection at closely spaced time points and satisfied established criteria for acceptable euthanasia technique. PMID:19807971

  1. Euthanasia method for mice in rapid time-course pulmonary pharmacokinetic studies.

    PubMed

    Schoell, Adam R; Heyde, Bruce R; Weir, Dana E; Chiang, Po-Chang; Hu, Yiding; Tung, David K

    2009-09-01

    To develop a means of euthanasia to support rapid time-course pharmacokinetic studies in mice, we compared retroorbital and intravenous lateral tail vein injection of ketamine-xylazine with regard to preparation time, utility, tissue distribution, and time to onset of euthanasia. Tissue distribution and time to onset of euthanasia did not differ between administration methods. However, retroorbital injection could be performed more rapidly than intravenous injection and was considered to be a technically simple and superior alternative for mouse euthanasia. Retroorbital ketamine-xylazine, CO(2) gas, and intraperitoneal pentobarbital then were compared as euthanasia agents in a rapid time-point pharmacokinetic study. Retroorbital ketamine-xylazine was the most efficient and consistent of the 3 methods, with an average time to death of approximately 5 s after injection. In addition, euthanasia by retroorbital ketamine-xylazine enabled accurate sample collection at closely spaced time points and satisfied established criteria for acceptable euthanasia technique.

  2. Bird biodiversity assessments in temperate forest: the value of point count versus acoustic monitoring protocols.

    PubMed

    Klingbeil, Brian T; Willig, Michael R

    2015-01-01

    Effective monitoring programs for biodiversity are needed to assess trends in biodiversity and evaluate the consequences of management. This is particularly true for birds and faunas that occupy interior forest and other areas of low human population density, as these are frequently under-sampled compared to other habitats. For birds, Autonomous Recording Units (ARUs) have been proposed as a supplement or alternative to point counts made by human observers to enhance monitoring efforts. We employed two strategies (i.e., simultaneous-collection and same-season) to compare point count and ARU methods for quantifying species richness and composition of birds in temperate interior forests. The simultaneous-collection strategy compares surveys by ARUs and point counts, with methods matched in time, location, and survey duration such that the person and machine simultaneously collect data. The same-season strategy compares surveys from ARUs and point counts conducted at the same locations throughout the breeding season, but methods differ in the number, duration, and frequency of surveys. This second strategy more closely follows the ways in which monitoring programs are likely to be implemented. Site-specific estimates of richness (but not species composition) differed between methods; however, the nature of the relationship was dependent on the assessment strategy. Estimates of richness from point counts were greater than estimates from ARUs in the simultaneous-collection strategy. Woodpeckers in particular, were less frequently identified from ARUs than point counts with this strategy. Conversely, estimates of richness were lower from point counts than ARUs in the same-season strategy. Moreover, in the same-season strategy, ARUs detected the occurrence of passerines at a higher frequency than did point counts. Differences between ARU and point count methods were only detected in site-level comparisons. Importantly, both methods provide similar estimates of species richness and composition for the region. Consequently, if single visits to sites or short-term monitoring are the goal, point counts will likely perform better than ARUs, especially if species are rare or vocalize infrequently. However, if seasonal or annual monitoring of sites is the goal, ARUs offer a viable alternative to standard point-count methods, especially in the context of large-scale or long-term monitoring of temperate forest birds.

  3. 13 CFR 120.972 - Third Party Lender participation fee and CDC fee.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... collect a one-time fee equal to 50 basis points on the Third Party Lender's participation in a Project....125 percent of the outstanding principal balance of the Debenture. The fee must be paid from the...

  4. Prevalence of sleep deficiency in early gestation and its associations with stress and depressive symptoms.

    PubMed

    Okun, Michele L; Kline, Christopher E; Roberts, James M; Wettlaufer, Barbara; Glover, Khaleelah; Hall, Martica

    2013-12-01

    Sleep deficiency is an emerging concept denoting a deficit in the quantity or quality of sleep. This may be particularly salient for pregnant women since they report considerable sleep complaints. Sleep deficiency is linked with morbidity, including degradations in psychosocial functioning, (e.g., depression and stress), which are recognized risk factors for adverse pregnancy outcomes. We sought to describe the frequency of sleep deficiency across early gestation (10-20 weeks) and whether sleep deficiency is associated with reports of more depressive symptoms and stress. Pregnant women (N=160) with no self-reported sleep or psychological disorder provided sleep data collected via diary and actigraphy during early pregnancy: 10-12, 14-16, and 18-20 weeks' gestation. Sleep deficiency was defined as short sleep duration, insufficient sleep, or insomnia. Symptoms of depression and stress were collected at the same three time points. Linear mixed effects models were used to analyze the data. Approximately 28%-38% met criteria for sleep deficiency for at least one time point in early gestation. Women who were sleep deficient across all time points reported more perceived stress than those who were not sleep deficient (p<0.01). Depressive symptoms were higher among women with diary-defined sleep deficiency across all time points (p=0.02). Sleep deficiency is a useful concept to describe sleep recognized to be disturbed in pregnancy. Women with persistent sleep deficiency appear to be at greater risk for impairments in psychosocial functioning during early gestation. These associations are important since psychosocial functioning is a recognized correlate of adverse pregnancy outcomes. Sleep deficiency may be another important risk factor for adverse pregnancy outcomes.

  5. Motion data classification on the basis of dynamic time warping with a cloud point distance measure

    NASA Astrophysics Data System (ADS)

    Switonski, Adam; Josinski, Henryk; Zghidi, Hafedh; Wojciechowski, Konrad

    2016-06-01

    The paper deals with the problem of classification of model free motion data. The nearest neighbors classifier which is based on comparison performed by Dynamic Time Warping transform with cloud point distance measure is proposed. The classification utilizes both specific gait features reflected by a movements of subsequent skeleton joints and anthropometric data. To validate proposed approach human gait identification challenge problem is taken into consideration. The motion capture database containing data of 30 different humans collected in Human Motion Laboratory of Polish-Japanese Academy of Information Technology is used. The achieved results are satisfactory, the obtained accuracy of human recognition exceeds 90%. What is more, the applied cloud point distance measure does not depend on calibration process of motion capture system which results in reliable validation.

  6. The feasibility of using 'bring your own device' (BYOD) technology for electronic data capture in multicentre medical audit and research.

    PubMed

    Faulds, M C; Bauchmuller, K; Miller, D; Rosser, J H; Shuker, K; Wrench, I; Wilson, P; Mills, G H

    2016-01-01

    Large-scale audit and research projects demand robust, efficient systems for accurate data collection, handling and analysis. We utilised a multiplatform 'bring your own device' (BYOD) electronic data collection app to capture observational audit data on theatre efficiency across seven hospital Trusts in South Yorkshire in June-August 2013. None of the participating hospitals had a dedicated information governance policy for bring your own device. Data were collected by 17 investigators for 392 individual theatre lists, capturing 14,148 individual data points, 12, 852 (91%) of which were transmitted to a central database on the day of collection without any loss of data. BYOD technology enabled accurate collection of a large volume of secure data across multiple NHS organisations over a short period of time. Bring your own device technology provides a method for collecting real-time audit, research and quality improvement data within healthcare systems without compromising patient data protection. © 2015 The Association of Anaesthetists of Great Britain and Ireland.

  7. EOS-AM precision pointing verification

    NASA Technical Reports Server (NTRS)

    Throckmorton, A.; Braknis, E.; Bolek, J.

    1993-01-01

    The Earth Observing System (EOS) AM mission requires tight pointing knowledge to meet scientific objectives, in a spacecraft with low frequency flexible appendage modes. As the spacecraft controller reacts to various disturbance sources and as the inherent appendage modes are excited by this control action, verification of precision pointing knowledge becomes particularly challenging for the EOS-AM mission. As presently conceived, this verification includes a complementary set of multi-disciplinary analyses, hardware tests and real-time computer in the loop simulations, followed by collection and analysis of hardware test and flight data and supported by a comprehensive data base repository for validated program values.

  8. Identifying Enterprise Leverage Points in Defense Acquisition Program Performance

    DTIC Science & Technology

    2009-09-01

    estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining...the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this...of law, no person shall be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB

  9. Analysis of 2D Torus and Hub Topologies of 100Mb/s Ethernet for the Whitney Commodity Computing Testbed

    NASA Technical Reports Server (NTRS)

    Pedretti, Kevin T.; Fineberg, Samuel A.; Kutler, Paul (Technical Monitor)

    1997-01-01

    A variety of different network technologies and topologies are currently being evaluated as part of the Whitney Project. This paper reports on the implementation and performance of a Fast Ethernet network configured in a 4x4 2D torus topology in a testbed cluster of 'commodity' Pentium Pro PCs. Several benchmarks were used for performance evaluation: an MPI point to point message passing benchmark, an MPI collective communication benchmark, and the NAS Parallel Benchmarks version 2.2 (NPB2). Our results show that for point to point communication on an unloaded network, the hub and 1 hop routes on the torus have about the same bandwidth and latency. However, the bandwidth decreases and the latency increases on the torus for each additional route hop. Collective communication benchmarks show that the torus provides roughly four times more aggregate bandwidth and eight times faster MPI barrier synchronizations than a hub based network for 16 processor systems. Finally, the SOAPBOX benchmarks, which simulate real-world CFD applications, generally demonstrated substantially better performance on the torus than on the hub. In the few cases the hub was faster, the difference was negligible. In total, our experimental results lead to the conclusion that for Fast Ethernet networks, the torus topology has better performance and scales better than a hub based network.

  10. A summary of measured hydraulic data for the series of steady and unsteady flow experiments over patterned roughness

    USGS Publications Warehouse

    Collins, Dannie L.; Flynn, Kathleen M.

    1979-01-01

    This report summarizes and makes available to other investigators the measured hydraulic data collected during a series of experiments designed to study the effect of patterned bed roughness on steady and unsteady open-channel flow. The patterned effect of the roughness was obtained by clear-cut mowing of designated areas of an otherwise fairly dense coverage of coastal Bermuda grass approximately 250 mm high. All experiments were conducted in the Flood Plain Simulation Facility during the period of October 7 through December 12, 1974. Data from 18 steady flow experiments and 10 unsteady flow experiments are summarized. Measured data included are ground-surface elevations, grass heights and densities, water-surface elevations and point velocities for all experiments. Additional tables of water-surface elevations and measured point velocities are included for the clear-cut areas for most experiments. One complete set of average water-surface elevations and one complete set of measured point velocities are tabulated for each steady flow experiment. Time series data, on a 2-minute time interval, are tabulated for both water-surface elevations and point velocities for each unsteady flow experiment. All data collected, including individual records of water-surface elevations for the steady flow experiments, have been stored on computer disk storage and can be retrieved using the computer programs listed in the attachment to this report. (Kosco-USGS)

  11. Control of oral malodour by dentifrices measured by gas chromatography.

    PubMed

    Newby, Evelyn E; Hickling, Jenneth M; Hughes, Francis J; Proskin, Howard M; Bosma, Marylynn P

    2008-04-01

    To evaluate the effect of toothpaste treatments on levels of oral volatile sulphur compounds (VSCs) measured by gas chromatography in two clinical studies. These were blinded, randomised, controlled, crossover studies with 16 (study A) or 20 (study B) healthy volunteers between the ages of 19-54. Study A: breath samples were collected at baseline, immediately and lhr after brushing. Four dentifrices (Zinc A, Zinc B, commercially available triclosan dentifrice and zinc free control) were evaluated. Study B: breath samples were collected at baseline, immediately, 1, 2, 3 and 7 hours after treatment. Subjects consumed a light breakfast then provided an additional breath sample between baseline assessment and treatment. Two dentifrices (gel-to-foam and a commercially available triclosan dentrifrice) were evaluated. Breath samples were collected in syringes and analysed for VSCs (hydrogen sulphide, methyl mercaptan and Total VSCs) utilising gas chromatography (GC) with flame photometric detection. Study A: immediately after treatment, a statistically significant reduction in VSCs from baseline was observed for Zinc A product only. A statistically significant reduction in VSCs from baseline was observed after 1 hour for all products. Both zinc products exhibited a significantly greater reduction from baseline VSCs than Colgate Total and Control at all time points. Study B: a statistically significant reduction in VSCs from baseline was observed at all time points for both products. The gel-to-foam product exhibited significantly greater reduction from baseline Total VSC concentration than Colgate Total at all time points from 1 hour post-treatment. Control of oral malodour by toothpaste treatment, evaluated as VSC levels using GC, has been demonstrated. Zinc is effective at reducing VSCs and the efficacy of zinc is formulation dependent. A gel-to-foam dentifrice was more effective at reducing VSCs than Colgate Total up to 7 hours.

  12. Job Demands, Burnout, and Teamwork in Healthcare Professionals Working in a General Hospital that Was Analysed At Two Points in Time

    PubMed Central

    Mijakoski, Dragan; Karadzhinska-Bislimovska, Jovanka; Stoleski, Sasho; Minov, Jordan; Atanasovska, Aneta; Bihorac, Elida

    2018-01-01

    AIM: The purpose of the paper was to assess job demands, burnout, and teamwork in healthcare professionals (HPs) working in a general hospital that was analysed at two points in time with a time lag of three years. METHODS: Time 1 respondents (N = 325) were HPs who participated during the first wave of data collection (2011). Time 2 respondents (N = 197) were HPs from the same hospital who responded at Time 2 (2014). Job demands, burnout, and teamwork were measured with Hospital Experience Scale, Maslach Burnout Inventory, and Hospital Survey on Patient Safety Culture, respectively. RESULTS: Significantly higher scores of emotional exhaustion (21.03 vs. 15.37, t = 5.1, p < 0.001), depersonalization (4.48 vs. 2.75, t = 3.8, p < 0.001), as well as organizational (2.51 vs. 2.34, t = 2.38, p = 0.017), emotional (2.46 vs. 2.25, t = 3.68, p < 0.001), and cognitive (2.82 vs. 2.64, t = 2.68, p = 0.008) job demands were found at Time 2. Teamwork levels were similar at both points in time (Time 1 = 3.84 vs. Time 2 = 3.84, t = 0.043, p = 0.97). CONCLUSION: Actual longitudinal study revealed significantly higher mean values of emotional exhaustion and depersonalization in 2014 that could be explained by significantly increased job demands between analysed points in time. PMID:29731948

  13. Real-time terrain storage generation from multiple sensors towards mobile robot operation interface.

    PubMed

    Song, Wei; Cho, Seoungjae; Xi, Yulong; Cho, Kyungeun; Um, Kyhyun

    2014-01-01

    A mobile robot mounted with multiple sensors is used to rapidly collect 3D point clouds and video images so as to allow accurate terrain modeling. In this study, we develop a real-time terrain storage generation and representation system including a nonground point database (PDB), ground mesh database (MDB), and texture database (TDB). A voxel-based flag map is proposed for incrementally registering large-scale point clouds in a terrain model in real time. We quantize the 3D point clouds into 3D grids of the flag map as a comparative table in order to remove the redundant points. We integrate the large-scale 3D point clouds into a nonground PDB and a node-based terrain mesh using the CPU. Subsequently, we program a graphics processing unit (GPU) to generate the TDB by mapping the triangles in the terrain mesh onto the captured video images. Finally, we produce a nonground voxel map and a ground textured mesh as a terrain reconstruction result. Our proposed methods were tested in an outdoor environment. Our results show that the proposed system was able to rapidly generate terrain storage and provide high resolution terrain representation for mobile mapping services and a graphical user interface between remote operators and mobile robots.

  14. Real-Time Terrain Storage Generation from Multiple Sensors towards Mobile Robot Operation Interface

    PubMed Central

    Cho, Seoungjae; Xi, Yulong; Cho, Kyungeun

    2014-01-01

    A mobile robot mounted with multiple sensors is used to rapidly collect 3D point clouds and video images so as to allow accurate terrain modeling. In this study, we develop a real-time terrain storage generation and representation system including a nonground point database (PDB), ground mesh database (MDB), and texture database (TDB). A voxel-based flag map is proposed for incrementally registering large-scale point clouds in a terrain model in real time. We quantize the 3D point clouds into 3D grids of the flag map as a comparative table in order to remove the redundant points. We integrate the large-scale 3D point clouds into a nonground PDB and a node-based terrain mesh using the CPU. Subsequently, we program a graphics processing unit (GPU) to generate the TDB by mapping the triangles in the terrain mesh onto the captured video images. Finally, we produce a nonground voxel map and a ground textured mesh as a terrain reconstruction result. Our proposed methods were tested in an outdoor environment. Our results show that the proposed system was able to rapidly generate terrain storage and provide high resolution terrain representation for mobile mapping services and a graphical user interface between remote operators and mobile robots. PMID:25101321

  15. A quantitative evaluation of two methods for preserving hair samples

    USGS Publications Warehouse

    Roon, David A.; Waits, L.P.; Kendall, K.C.

    2003-01-01

    Hair samples are an increasingly important DNA source for wildlife studies, yet optimal storage methods and DNA degradation rates have not been rigorously evaluated. We tested amplification success rates over a one-year storage period for DNA extracted from brown bear (Ursus arctos) hair samples preserved using silica desiccation and -20C freezing. For three nuclear DNA microsatellites, success rates decreased significantly after a six-month time point, regardless of storage method. For a 1000 bp mitochondrial fragment, a similar decrease occurred after a two-week time point. Minimizing delays between collection and DNA extraction will maximize success rates for hair-based noninvasive genetic sampling projects.

  16. Effects of Turbulence Model on Prediction of Hot-Gas Lateral Jet Interaction in a Supersonic Crossflow

    DTIC Science & Technology

    2015-07-01

    performance computing time from the US Department of Defense (DOD) High Performance Computing Modernization program at the US Army Research Laboratory...Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time ...dimensional, compressible, Reynolds-averaged Navier-Stokes (RANS) equations are solved using a finite volume method. A point-implicit time - integration

  17. Standard deviation of vertical two-point longitudinal velocity differences in the atmospheric boundary layer.

    NASA Technical Reports Server (NTRS)

    Fichtl, G. H.

    1971-01-01

    Statistical estimates of wind shear in the planetary boundary layer are important in the design of V/STOL aircraft, and for the design of the Space Shuttle. The data analyzed in this study consist of eleven sets of longitudinal turbulent velocity fluctuation time histories digitized at 0.2 sec intervals with approximately 18,000 data points per time history. The longitudinal velocity fluctuations were calculated with horizontal wind and direction data collected at the 18-, 30-, 60-, 90-, 120-, and 150-m levels. The data obtained confirm the result that Eulerian time spectra transformed to wave-number spectra with Taylor's frozen eddy hypothesis possess inertial-like behavior at wave-numbers well out of the inertial subrange.

  18. Metabolic changes in serum steroids induced by total-body irradiation of female C57B/6 mice.

    PubMed

    Moon, Ju-Yeon; Shin, Hee-June; Son, Hyun-Hwa; Lee, Jeongae; Jung, Uhee; Jo, Sung-Kee; Kim, Hyun Sik; Kwon, Kyung-Hoon; Park, Kyu Hwan; Chung, Bong Chul; Choi, Man Ho

    2014-05-01

    The short- and long-term effects of a single exposure to gamma radiation on steroid metabolism were investigated in mice. Gas chromatography-mass spectrometry was used to generate quantitative profiles of serum steroid levels in mice that had undergone total-body irradiation (TBI) at doses of 0Gy, 1Gy, and 4Gy. Following TBI, serum samples were collected at the pre-dose time point and 1, 3, 6, and 9 months after TBI. Serum levels of progestins, progesterone, 5β-DHP, 5α-DHP, and 20α-DHP showed a significant down-regulation following short-term exposure to 4Gy, with the exception of 20α-DHP, which was significantly decreased at each of the time points measured. The corticosteroids 5α-THDOC and 5α-DHB were significantly elevated at each of the time points measured after exposure to either 1 or 4Gy. Among the sterols, 24S-OH-cholestoerol showed a dose-related elevation after irradiation that reached significance in the high dose group at the 6- and 9-month time points. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Fast Fingerprint Database Maintenance for Indoor Positioning Based on UGV SLAM

    PubMed Central

    Tang, Jian; Chen, Yuwei; Chen, Liang; Liu, Jingbin; Hyyppä, Juha; Kukko, Antero; Kaartinen, Harri; Hyyppä, Hannu; Chen, Ruizhi

    2015-01-01

    Indoor positioning technology has become more and more important in the last two decades. Utilizing Received Signal Strength Indicator (RSSI) fingerprints of Signals of OPportunity (SOP) is a promising alternative navigation solution. However, as the RSSIs vary during operation due to their physical nature and are easily affected by the environmental change, one challenge of the indoor fingerprinting method is maintaining the RSSI fingerprint database in a timely and effective manner. In this paper, a solution for rapidly updating the fingerprint database is presented, based on a self-developed Unmanned Ground Vehicles (UGV) platform NAVIS. Several SOP sensors were installed on NAVIS for collecting indoor fingerprint information, including a digital compass collecting magnetic field intensity, a light sensor collecting light intensity, and a smartphone which collects the access point number and RSSIs of the pre-installed WiFi network. The NAVIS platform generates a map of the indoor environment and collects the SOPs during processing of the mapping, and then the SOP fingerprint database is interpolated and updated in real time. Field tests were carried out to evaluate the effectiveness and efficiency of the proposed method. The results showed that the fingerprint databases can be quickly created and updated with a higher sampling frequency (5Hz) and denser reference points compared with traditional methods, and the indoor map can be generated without prior information. Moreover, environmental changes could also be detected quickly for fingerprint indoor positioning. PMID:25746096

  20. Some analysis on the diurnal variation of rainfall over the Atlantic Ocean

    NASA Technical Reports Server (NTRS)

    Gill, T.; Perng, S.; Hughes, A.

    1981-01-01

    Data collected from the GARP Atlantic Tropical Experiment (GATE) was examined. The data were collected from 10,000 grid points arranged as a 100 x 100 array; each grid covered a 4 square km area. The amount of rainfall was measured every 15 minutes during the experiment periods using c-band radars. Two types of analyses were performed on the data: analysis of diurnal variation was done on each of grid points based on the rainfall averages at noon and at midnight, and time series analysis on selected grid points based on the hourly averages of rainfall. Since there are no known distribution model which best describes the rainfall amount, nonparametric methods were used to examine the diurnal variation. Kolmogorov-Smirnov test was used to test if the rainfalls at noon and at midnight have the same statistical distribution. Wilcoxon signed-rank test was used to test if the noon rainfall is heavier than, equal to, or lighter than the midnight rainfall. These tests were done on each of the 10,000 grid points at which the data are available.

  1. Self-organized flexible leadership promotes collective intelligence in human groups

    PubMed Central

    Kurvers, Ralf H. J. M.; Wolf, Max; Naguib, Marc; Krause, Jens

    2015-01-01

    Collective intelligence refers to the ability of groups to outperform individual decision-makers. At present, relatively little is known about the mechanisms promoting collective intelligence in natural systems. We here test a novel mechanism generating collective intelligence: self-organization according to information quality. We tested this mechanism by performing simulated predator detection experiments using human groups. By continuously tracking the personal information of all members prior to collective decisions, we found that individuals adjusted their response time during collective decisions to the accuracy of their personal information. When individuals possessed accurate personal information, they decided quickly during collective decisions providing accurate information to the other group members. By contrast, when individuals had inaccurate personal information, they waited longer, allowing them to use social information before making a decision. Individuals deciding late during collective decisions had an increased probability of changing their decision leading to increased collective accuracy. Our results thus show that groups can self-organize according to the information accuracy of their members, thereby promoting collective intelligence. Interestingly, we find that individuals flexibly acted both as leader and as follower depending on the quality of their personal information at any particular point in time. PMID:27019718

  2. 78 FR 56221 - Proposed Collection; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-12

    ...://www.regulations.gov . Follow the instructions for submitting comments. Mail: Federal Docket Management... name at the time they assume responsibility for the shipment, from point of origin, and at specified... forwarded by the carrier to the appropriate finance center for payment. Affected Public: Business or other...

  3. High- and low-LET induced chromosome damage in human lymphocytes: a time-course of aberrations in metaphase and interphase

    NASA Technical Reports Server (NTRS)

    George, K.; Wu, H.; Willingham, V.; Furusawa, Y.; Kawata, T.; Cucinotta, F. A.; Dicello, J. F. (Principal Investigator)

    2001-01-01

    PURPOSE: To investigate how cell-cycle delays in human peripheral lymphocytes affect the expression of complex chromosome damage in metaphase following high- and low-LET radiation exposure. MATERIALS AND METHODS: Whole blood was irradiated in vitro with a low and a high dose of 1 GeV u(-1) iron particles, 400MeV u(-1) neon particles or y-rays. Lymphocytes were cultured and metaphase cells were collected at different time points after 48-84h in culture. Interphase chromosomes were prematurely condensed using calyculin-A, either 48 or 72 h after exposure to iron particles or gamma-rays. Cells in first division were analysed using a combination of FISH whole-chromosome painting and DAPI/ Hoechst 33258 harlequin staining. RESULTS: There was a delay in expression of chromosome damage in metaphase that was LET- and dose-dependant. This delay was mostly related to the late emergence of complex-type damage into metaphase. Yields of damage in PCC collected 48 h after irradiation with iron particles were similar to values obtained from cells undergoing mitosis after prolonged incubation. CONCLUSION: The yield of high-LET radiation-induced complex chromosome damage could be underestimated when analysing metaphase cells collected at one time point after irradiation. Chemically induced PCC is a more accurate technique since problems with complicated cell-cycle delays are avoided.

  4. High- and low-LET induced chromosome damage in human lymphocytes: a time-course of aberrations in metaphase and interphase.

    PubMed

    George, K; Wu, H; Willingham, V; Furusawa, Y; Kawata, T; Cucinotta, F A

    2001-02-01

    To investigate how cell-cycle delays in human peripheral lymphocytes affect the expression of complex chromosome damage in metaphase following high- and low-LET radiation exposure. Whole blood was irradiated in vitro with a low and a high dose of 1 GeV u(-1) iron particles, 400MeV u(-1) neon particles or y-rays. Lymphocytes were cultured and metaphase cells were collected at different time points after 48-84h in culture. Interphase chromosomes were prematurely condensed using calyculin-A, either 48 or 72 h after exposure to iron particles or gamma-rays. Cells in first division were analysed using a combination of FISH whole-chromosome painting and DAPI/ Hoechst 33258 harlequin staining. There was a delay in expression of chromosome damage in metaphase that was LET- and dose-dependant. This delay was mostly related to the late emergence of complex-type damage into metaphase. Yields of damage in PCC collected 48 h after irradiation with iron particles were similar to values obtained from cells undergoing mitosis after prolonged incubation. The yield of high-LET radiation-induced complex chromosome damage could be underestimated when analysing metaphase cells collected at one time point after irradiation. Chemically induced PCC is a more accurate technique since problems with complicated cell-cycle delays are avoided.

  5. Predictors of Disordered Eating in Adolescence and Young Adulthood: A Population-Based, Longitudinal Study of Females and Males in Norway

    ERIC Educational Resources Information Center

    Abebe, Dawit Shawel; Torgersen, Leila; Lien, Lars; Hafstad, Gertrud S.; von Soest, Tilmann

    2014-01-01

    We investigated longitudinal predictors for disordered eating from early adolescence to young adulthood (12-34 years) across gender and different developmental phases among Norwegian young people. Survey data from a population-based sample were collected at four time points (T) over a 13-year time span. A population-based sample of 5,679 females…

  6. The health, mental health, and well-being benefits of rape crisis counseling.

    PubMed

    Westmarland, Nicole; Alderson, Sue

    2013-11-01

    There is very little research on interventions to alleviate the distress experienced following rape. This action research project developed and piloted the "Taking Back Control" tool that measured the impact of rape crisis counseling over time. Five rape crisis centers in the North of England agreed to pilot the tool, which was administered by the client's counselor, either on Week 1 or 2, and then repeated every 6 weeks until the end of counseling. Eighty-seven clients completed at least two questionnaires. This allowed us to measure change from their first compared with their last data collection point. The most change was made in relation to the statement "I feel empowered and in control of my life," where 61% strongly/disagreed at the first data collection point compared with 31% at the last data collection point. Large shifts were also seen in relation to "I have 'flashbacks' about what happened" and "I have panic attacks." Overall, some degree of positive change was seen for all measures. This research, despite some limitations, begins to develop an evidence base for rape crisis centers to demonstrate their benefits and to assess and develop their own practice.

  7. Sensitivity of finite helical axis parameters to temporally varying realistic motion utilizing an idealized knee model.

    PubMed

    Johnson, T S; Andriacchi, T P; Erdman, A G

    2004-01-01

    Various uses of the screw or helical axis have previously been reported in the literature in an attempt to quantify the complex displacements and coupled rotations of in vivo human knee kinematics. Multiple methods have been used by previous authors to calculate the axis parameters, and it has been theorized that the mathematical stability and accuracy of the finite helical axis (FHA) is highly dependent on experimental variability and rotation increment spacing between axis calculations. Previous research has not addressed the sensitivity of the FHA for true in vivo data collection, as required for gait laboratory analysis. This research presents a controlled series of experiments simulating continuous data collection as utilized in gait analysis to investigate the sensitivity of the three-dimensional finite screw axis parameters of rotation, displacement, orientation and location with regard to time step increment spacing, utilizing two different methods for spatial location. Six-degree-of-freedom motion parameters are measured for an idealized rigid body knee model that is constrained to a planar motion profile for the purposes of error analysis. The kinematic data are collected using a multicamera optoelectronic system combined with an error minimization algorithm known as the point cluster method. Rotation about the screw axis is seen to be repeatable, accurate and time step increment insensitive. Displacement along the axis is highly dependent on time step increment sizing, with smaller rotation angles between calculations producing more accuracy. Orientation of the axis in space is accurate with only a slight filtering effect noticed during motion reversal. Locating the screw axis by a projected point onto the screw axis from the mid-point of the finite displacement is found to be less sensitive to motion reversal than finding the intersection of the axis with a reference plane. A filtering effect of the spatial location parameters was noted for larger time step increments during periods of little or no rotation.

  8. Saving energy for the data collection point in WBAN network

    NASA Astrophysics Data System (ADS)

    Nguyen-Duc, Toan; Kamioka, Eiji

    2017-11-01

    Wireless sensor networking (WSN) has been rapidly developed and become essential in various domains including health care systems. Such systems use WSN to collect real-time medical sensed data, aiming at improving the patient safety. For instance, patients suffered from adverse events, i.e., cardiac or respiratory arrests, are monitored so as to prevent them from getting harm. Sensors are placed on, in or near the patients' body to continuously collect sensing data such as the electrocardiograms, blood oxygenation, breathing, and heart rate. In this case, the sensors form a subcategory of WSN called wireless body area network (WBAN). In WBAN, sensing data are sent to one or more data collection points called personal server (PS). The role of PS is important since it forwards sensed data, to a medical server via a Bluetooth/WLAN connection in real time to support storage of information and real-time diagnosis, the device can also issue a notification of an emergency status. Since PS is a battery-based device, when its battery is empty, it will disconnect the sensed medical data with the rest network. To best of our knowledge, very few studies that focus on saving energy for the PS. To this end, this work investigates the trade-off between energy consumption for wireless communication and the amount of sensing data. An energy consumption model for wireless communication has been proposed based on direct measurement using real testbed. According to our findings, it is possible to save energy for the PS by selecting suitable wireless technology to be used based on the amount of data to be transmitted.

  9. Atmospheric Characterization During Super-Resolution Vision System Developmental Testing

    DTIC Science & Technology

    2013-05-01

    local time each day of the test. RM Young 81000 sonic anemometers were located at 0-, 800-, and 1800-m target points at 1.5-m elevation to provide point...estimates of C2n. Sonic anemometer data were also collected at a 0-km tower at several levels, providing a vertical turbulence profile. Turbulence...Atmospheric Instrumentation and Analysis 8 4. Estimation of C2n from Sonic Anemometer Data 11 5. Data Plots 14 6. Derived Results 32 7. Conclusions 36 8

  10. Efficient Open Source Lidar for Desktop Users

    NASA Astrophysics Data System (ADS)

    Flanagan, Jacob P.

    Lidar --- Light Detection and Ranging --- is a remote sensing technology that utilizes a device similar to a rangefinder to determine a distance to a target. A laser pulse is shot at an object and the time it takes for the pulse to return in measured. The distance to the object is easily calculated using the speed property of light. For lidar, this laser is moved (primarily in a rotational movement usually accompanied by a translational movement) and records the distances to objects several thousands of times per second. From this, a 3 dimensional structure can be procured in the form of a point cloud. A point cloud is a collection of 3 dimensional points with at least an x, a y and a z attribute. These 3 attributes represent the position of a single point in 3 dimensional space. Other attributes can be associated with the points that include properties such as the intensity of the return pulse, the color of the target or even the time the point was recorded. Another very useful, post processed attribute is point classification where a point is associated with the type of object the point represents (i.e. ground.). Lidar has gained popularity and advancements in the technology has made its collection easier and cheaper creating larger and denser datasets. The need to handle this data in a more efficiently manner has become a necessity; The processing, visualizing or even simply loading lidar can be computationally intensive due to its very large size. Standard remote sensing and geographical information systems (GIS) software (ENVI, ArcGIS, etc.) was not originally built for optimized point cloud processing and its implementation is an afterthought and therefore inefficient. Newer, more optimized software for point cloud processing (QTModeler, TopoDOT, etc.) usually lack more advanced processing tools, requires higher end computers and are very costly. Existing open source lidar approaches the loading and processing of lidar in an iterative fashion that requires implementing batch coding and processing time that could take months for a standard lidar dataset. This project attempts to build a software with the best approach for creating, importing and exporting, manipulating and processing lidar, especially in the environmental field. Development of this software is described in 3 sections - (1) explanation of the search methods for efficiently extracting the "area of interest" (AOI) data from disk (file space), (2) using file space (for storage), budgeting memory space (for efficient processing) and moving between the two, and (3) method development for creating lidar products (usually raster based) used in environmental modeling and analysis (i.e.: hydrology feature extraction, geomorphological studies, ecology modeling, etc.).

  11. 77 FR 21494 - Definition of “Predominantly Engaged in Financial Activities”

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-10

    ... financial activities that were authorized by the Board under various authorities at different points in time... activities that are closely related to banking.\\23\\ These activities include performing appraisals of real... industrial real estate financing, providing check guarantee services, providing collection agency services...

  12. Characteristics of Outstanding Student Teachers

    ERIC Educational Resources Information Center

    Eldar, Eitan; Talmor, Rachel

    2006-01-01

    This paper describes the characteristics of student teachers who were evaluated as outstanding during their teacher education studies. Outstanding students were selected after 2 years of field experiences based on their teaching abilities and academic achievements. Data were collected at three points of time: before they commenced their studies at…

  13. Longitudinal employment outcomes of an early intervention vocational rehabilitation service for people admitted to rehabilitation with a traumatic spinal cord injury.

    PubMed

    Hilton, G; Unsworth, C A; Murphy, G C; Browne, M; Olver, J

    2017-08-01

    Longitudinal cohort design. First, to explore the longitudinal outcomes for people who received early intervention vocational rehabilitation (EIVR); second, to examine the nature and extent of relationships between contextual factors and employment outcomes over time. Both inpatient and community-based clients of a Spinal Community Integration Service (SCIS). People of workforce age undergoing inpatient rehabilitation for traumatic spinal cord injury were invited to participate in EIVR as part of SCIS. Data were collected at the following three time points: discharge and at 1 year and 2+ years post discharge. Measures included the spinal cord independence measure, hospital anxiety and depression scale, impact on participation and autonomy scale, numerical pain-rating scale and personal wellbeing index. A range of chi square, correlation and regression tests were undertaken to look for relationships between employment outcomes and demographic, emotional and physical characteristics. Ninety-seven participants were recruited and 60 were available at the final time point where 33% (95% confidence interval (CI): 24-42%) had achieved an employment outcome. Greater social participation was strongly correlated with wellbeing (ρ=0.692), and reduced anxiety (ρ=-0.522), depression (ρ=-0.643) and pain (ρ=-0.427) at the final time point. In a generalised linear mixed effect model, education status, relationship status and subjective wellbeing increased significantly the odds of being employed at the final time point. Tertiary education prior to injury was associated with eight times increased odds of being in employment at the final time point; being in a relationship at the time of injury was associated with increased odds of being in employment of more than 3.5; subjective wellbeing, while being the least powerful predictor was still associated with increased odds (1.8 times) of being employed at the final time point. EIVR shows promise in delivering similar return-to-work rates as those traditionally reported, but sooner. The dynamics around relationships, subjective wellbeing, social participation and employment outcomes require further exploration.

  14. A seismic signal processor suitable for use with the NOAA/GOES satellite data collection system

    NASA Technical Reports Server (NTRS)

    Webster, W. J., Jr.; Miller, W. H.; Whitley, R.; Allenby, R. J.; Dennison, R. T.

    1981-01-01

    Because of the high data-rate requirements, a practical system capable of collecting seismic information in the field and relaying it, via satellite, to a central collection point is not yet available. A seismic signal processor has been developed and tested for use with the NOAA/GOES satellite data collection system. Performance tests on recorded, as well as real time, short period signals indicate that the event recognition technique used is nearly perfect in its rejection of environmental noise and other non-seismic signals and that, with the use of solid state buffer memories, data can be acquired in many swarm situations. The design of a complete field data collection platform is discussed based on the prototype evaluation.

  15. An evaluation of the ERTS data collection system as a potential operational tool. [automatic hydrologic data collection and processing system for geological surveys

    NASA Technical Reports Server (NTRS)

    Paulson, R. W.

    1974-01-01

    The Earth Resources Technology Satellite Data Collection System has been shown to be, from the users vantage point, a reliable and simple system for collecting data from U.S. Geological Survey operational field instrumentation. It is technically feasible to expand the ERTS system into an operational polar-orbiting data collection system to gather data from the Geological Survey's Hydrologic Data Network. This could permit more efficient internal management of the Network, and could enable the Geological Survey to make data available to cooperating agencies in near-real time. The Geological Survey is conducting an analysis of the costs and benefits of satellite data-relay systems.

  16. Assessment of Apical Expression of Alpha-2 Integrin, Heat Shock Protein, and Proinflammatory and Immunoregulatory Cytokines in Response to Endodontic Infection.

    PubMed

    Bambirra, Wilson; Maciel, Kamilla Faria; Thebit, Marcela Marçal; de Brito, Luciana Carla Neves; Vieira, Leda Quercia; Sobrinho, Antônio Paulino Ribeiro

    2015-07-01

    The purpose of this study was to examine alpha-2 integrin, molecular mediators, cytokines, and chemokines from cells in periapical interstitial fluid from root canal infections before and after the reduction of the bacterial load using a cleaning procedure. Subjects included 20 patients referred to the School of Dentistry at the Universidade Federal de Minas Gerais (Belo Horizonte, Minas Gerais, Brazil). Clinical samples were taken from teeth with pulp necrosis, and no patients had acute periapical symptoms at the time of the appointments. After cleaning and drying, 3 paper points were introduced into the root canal, passing passively through the root apex (2 mm) into the periapical tissues for 1 minute. The samples were collected immediately after root canal cleaning and 7 days later (restrained root canal bacterial load) to characterize those gene expressions using real-time polymerase chain reaction. Significantly lower levels of tumor necrosis factor alpha, chemokine ligand 5 (CCL5), chemokine ligand 2/monocyte chemotactic protein 1 (CCL2/MCP-1), and interleukin (IL)-8 in teeth with restrained bacterial loads (second collection) compared with the first collection were observed (P < .05). Similarly, the messenger RNA expression of the integrins secreted phosphoprotein 1 (SSP1)/ostepontin and focal adhesion kinase (FAK) decreased in samples from the second collection (P < .05). The messenger RNA for the regulatory cytokine IL-10 was significant higher in samples from the second collection (day 7) compared with the first collection (day 0) (P < .05). Messenger RNA expression of IL-1β, IL-17A, interferon gamma, alpha-2 integrin, and Hsp47/SERPINH1 were similar at both time points (P > .05). These findings suggest that after reducing the root canal bacterial load a decrease in the inflammatory response took place in the periapical lesions. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  17. Mixed-Poisson Point Process with Partially-Observed Covariates: Ecological Momentary Assessment of Smoking.

    PubMed

    Neustifter, Benjamin; Rathbun, Stephen L; Shiffman, Saul

    2012-01-01

    Ecological Momentary Assessment is an emerging method of data collection in behavioral research that may be used to capture the times of repeated behavioral events on electronic devices, and information on subjects' psychological states through the electronic administration of questionnaires at times selected from a probability-based design as well as the event times. A method for fitting a mixed Poisson point process model is proposed for the impact of partially-observed, time-varying covariates on the timing of repeated behavioral events. A random frailty is included in the point-process intensity to describe variation among subjects in baseline rates of event occurrence. Covariate coefficients are estimated using estimating equations constructed by replacing the integrated intensity in the Poisson score equations with a design-unbiased estimator. An estimator is also proposed for the variance of the random frailties. Our estimators are robust in the sense that no model assumptions are made regarding the distribution of the time-varying covariates or the distribution of the random effects. However, subject effects are estimated under gamma frailties using an approximate hierarchical likelihood. The proposed approach is illustrated using smoking data.

  18. An Indoor Positioning Technique Based on a Feed-Forward Artificial Neural Network Using Levenberg-Marquardt Learning Method

    NASA Astrophysics Data System (ADS)

    Pahlavani, P.; Gholami, A.; Azimi, S.

    2017-09-01

    This paper presents an indoor positioning technique based on a multi-layer feed-forward (MLFF) artificial neural networks (ANN). Most of the indoor received signal strength (RSS)-based WLAN positioning systems use the fingerprinting technique that can be divided into two phases: the offline (calibration) phase and the online (estimation) phase. In this paper, RSSs were collected for all references points in four directions and two periods of time (Morning and Evening). Hence, RSS readings were sampled at a regular time interval and specific orientation at each reference point. The proposed ANN based model used Levenberg-Marquardt algorithm for learning and fitting the network to the training data. This RSS readings in all references points and the known position of these references points was prepared for training phase of the proposed MLFF neural network. Eventually, the average positioning error for this network using 30% check and validation data was computed approximately 2.20 meter.

  19. Actuator-Assisted Calibration of Freehand 3D Ultrasound System.

    PubMed

    Koo, Terry K; Silvia, Nathaniel

    2018-01-01

    Freehand three-dimensional (3D) ultrasound has been used independently of other technologies to analyze complex geometries or registered with other imaging modalities to aid surgical and radiotherapy planning. A fundamental requirement for all freehand 3D ultrasound systems is probe calibration. The purpose of this study was to develop an actuator-assisted approach to facilitate freehand 3D ultrasound calibration using point-based phantoms. We modified the mathematical formulation of the calibration problem to eliminate the need of imaging the point targets at different viewing angles and developed an actuator-assisted approach/setup to facilitate quick and consistent collection of point targets spanning the entire image field of view. The actuator-assisted approach was applied to a commonly used cross wire phantom as well as two custom-made point-based phantoms (original and modified), each containing 7 collinear point targets, and compared the results with the traditional freehand cross wire phantom calibration in terms of calibration reproducibility, point reconstruction precision, point reconstruction accuracy, distance reconstruction accuracy, and data acquisition time. Results demonstrated that the actuator-assisted single cross wire phantom calibration significantly improved the calibration reproducibility and offered similar point reconstruction precision, point reconstruction accuracy, distance reconstruction accuracy, and data acquisition time with respect to the freehand cross wire phantom calibration. On the other hand, the actuator-assisted modified "collinear point target" phantom calibration offered similar precision and accuracy when compared to the freehand cross wire phantom calibration, but it reduced the data acquisition time by 57%. It appears that both actuator-assisted cross wire phantom and modified collinear point target phantom calibration approaches are viable options for freehand 3D ultrasound calibration.

  20. Actuator-Assisted Calibration of Freehand 3D Ultrasound System

    PubMed Central

    2018-01-01

    Freehand three-dimensional (3D) ultrasound has been used independently of other technologies to analyze complex geometries or registered with other imaging modalities to aid surgical and radiotherapy planning. A fundamental requirement for all freehand 3D ultrasound systems is probe calibration. The purpose of this study was to develop an actuator-assisted approach to facilitate freehand 3D ultrasound calibration using point-based phantoms. We modified the mathematical formulation of the calibration problem to eliminate the need of imaging the point targets at different viewing angles and developed an actuator-assisted approach/setup to facilitate quick and consistent collection of point targets spanning the entire image field of view. The actuator-assisted approach was applied to a commonly used cross wire phantom as well as two custom-made point-based phantoms (original and modified), each containing 7 collinear point targets, and compared the results with the traditional freehand cross wire phantom calibration in terms of calibration reproducibility, point reconstruction precision, point reconstruction accuracy, distance reconstruction accuracy, and data acquisition time. Results demonstrated that the actuator-assisted single cross wire phantom calibration significantly improved the calibration reproducibility and offered similar point reconstruction precision, point reconstruction accuracy, distance reconstruction accuracy, and data acquisition time with respect to the freehand cross wire phantom calibration. On the other hand, the actuator-assisted modified “collinear point target” phantom calibration offered similar precision and accuracy when compared to the freehand cross wire phantom calibration, but it reduced the data acquisition time by 57%. It appears that both actuator-assisted cross wire phantom and modified collinear point target phantom calibration approaches are viable options for freehand 3D ultrasound calibration. PMID:29854371

  1. Electronic Data Collection Options for Practice-Based Research Networks

    PubMed Central

    Pace, Wilson D.; Staton, Elizabeth W.

    2005-01-01

    PURPOSE We wanted to describe the potential benefits and problems associated with selected electronic methods of collecting data within practice-based research networks (PBRNs). METHODS We considered a literature review, discussions with PBRN researchers, industry information, and personal experience. This article presents examples of selected PBRNs’ use of electronic data collection. RESULTS Collecting research data in the geographically dispersed PBRN environment requires considerable coordination to ensure completeness, accuracy, and timely transmission of the data, as well as a limited burden on the participants. Electronic data collection, particularly at the point of care, offers some potential solutions. Electronic systems allow use of transparent decision algorithms and improved data entry and data integrity. These systems may improve data transfer to the central office as well as tracking systems for monitoring study progress. PBRNs have available to them a wide variety of electronic data collection options, including notebook computers, tablet PCs, personal digital assistants (PDAs), and browser-based systems that operate independent of or over the Internet. Tablet PCs appear particularly advantageous for direct patient data collection in an office environment. PDAs work well for collecting defined data elements at the point of care. Internet-based systems work well for data collection that can be completed after the patient visit, as most primary care offices do not support Internet connectivity in examination rooms. CONCLUSIONS When planning to collect data electronically, it is important to match the electronic data collection method to the study design. Focusing an inappropriate electronic data collection method onto users can interfere with accurate data gathering and may also anger PBRN members. PMID:15928215

  2. Electronic data collection options for practice-based research networks.

    PubMed

    Pace, Wilson D; Staton, Elizabeth W

    2005-01-01

    We wanted to describe the potential benefits and problems associated with selected electronic methods of collecting data within practice-based research networks (PBRNs). We considered a literature review, discussions with PBRN researchers, industry information, and personal experience. This article presents examples of selected PBRNs' use of electronic data collection. Collecting research data in the geographically dispersed PBRN environment requires considerable coordination to ensure completeness, accuracy, and timely transmission of the data, as well as a limited burden on the participants. Electronic data collection, particularly at the point of care, offers some potential solutions. Electronic systems allow use of transparent decision algorithms and improved data entry and data integrity. These systems may improve data transfer to the central office as well as tracking systems for monitoring study progress. PBRNs have available to them a wide variety of electronic data collection options, including notebook computers, tablet PCs, personal digital assistants (PDAs), and browser-based systems that operate independent of or over the Internet. Tablet PCs appear particularly advantageous for direct patient data collection in an office environment. PDAs work well for collecting defined data elements at the point of care. Internet-based systems work well for data collection that can be completed after the patient visit, as most primary care offices do not support Internet connectivity in examination rooms. When planning to collect data electronically, it is important to match the electronic data collection method to the study design. Focusing an inappropriate electronic data collection method onto users can interfere with accurate data gathering and may also anger PBRN members.

  3. 78 FR 2438 - Agency Information Collection Activities; Existing Collection, Comments Requested: The National...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-11

    ... Collection, Comments Requested: The National Instant Criminal Background Check System (NICS) Point-of-Contact... Background Check System (NICS) Point-of-Contact (POC) State Final Determination Electronic Submission. (3... required to respond, as well as a brief abstract: Primary: Full Point-of-Contact (POC) States; Partial POC...

  4. A Rigorous Temperature-Dependent Stochastic Modelling and Testing for MEMS-Based Inertial Sensor Errors.

    PubMed

    El-Diasty, Mohammed; Pagiatakis, Spiros

    2009-01-01

    In this paper, we examine the effect of changing the temperature points on MEMS-based inertial sensor random error. We collect static data under different temperature points using a MEMS-based inertial sensor mounted inside a thermal chamber. Rigorous stochastic models, namely Autoregressive-based Gauss-Markov (AR-based GM) models are developed to describe the random error behaviour. The proposed AR-based GM model is initially applied to short stationary inertial data to develop the stochastic model parameters (correlation times). It is shown that the stochastic model parameters of a MEMS-based inertial unit, namely the ADIS16364, are temperature dependent. In addition, field kinematic test data collected at about 17 °C are used to test the performance of the stochastic models at different temperature points in the filtering stage using Unscented Kalman Filter (UKF). It is shown that the stochastic model developed at 20 °C provides a more accurate inertial navigation solution than the ones obtained from the stochastic models developed at -40 °C, -20 °C, 0 °C, +40 °C, and +60 °C. The temperature dependence of the stochastic model is significant and should be considered at all times to obtain optimal navigation solution for MEMS-based INS/GPS integration.

  5. 40 CFR 63.681 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... features permanently integrated into the design of the unit. Emission point means an individual tank... system is not a drain and collection system that is designed and operated for the sole purpose of..., or transfer system used to manage off-site material. Off-site material service means any time when a...

  6. 40 CFR 63.681 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... features permanently integrated into the design of the unit. Emission point means an individual tank... system is not a drain and collection system that is designed and operated for the sole purpose of..., or transfer system used to manage off-site material. Off-site material service means any time when a...

  7. Combining survey and administrative data using state space models

    Treesearch

    Stephen Horn; Ray Czaplewski

    2013-01-01

    Even as access to transactional data has been transformed by harnessing electronic flows, use of satellite imagery, research access to linked customer level records, and harmonising collections across jurisdictions, official statisticians are under pressure to detect significant turning points within response times and resolutions that cannot be handled by present...

  8. Subjective Relational Experiences and Employee Innovative Behaviors in the Workplace

    ERIC Educational Resources Information Center

    Vinarski-Peretz, Hedva; Binyamin, Galy; Carmeli, Abraham

    2011-01-01

    This paper presents two studies that explore the implications of subjective relational experiences (positive regard, mutuality and vitality) on employee engagement in innovative behaviors at work. Data collected at two points in time were used to test two mediation models that link subjective relational experiences and innovative behaviors. The…

  9. 9 CFR 149.5 - Offsite identification and segregation of certified swine.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of certified swine. 149.5 Section 149.5 Animals and Animal Products ANIMAL AND PLANT HEALTH... § 149.5 Offsite identification and segregation of certified swine. Certified swine moved from a..., collection point, or slaughter facility, must remain segregated from noncertified swine at all times and...

  10. 9 CFR 149.5 - Offsite identification and segregation of certified swine.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... of certified swine. 149.5 Section 149.5 Animals and Animal Products ANIMAL AND PLANT HEALTH... § 149.5 Offsite identification and segregation of certified swine. Certified swine moved from a..., collection point, or slaughter facility, must remain segregated from noncertified swine at all times and...

  11. 9 CFR 149.5 - Offsite identification and segregation of certified swine.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... of certified swine. 149.5 Section 149.5 Animals and Animal Products ANIMAL AND PLANT HEALTH... § 149.5 Offsite identification and segregation of certified swine. Certified swine moved from a..., collection point, or slaughter facility, must remain segregated from noncertified swine at all times and...

  12. 9 CFR 149.5 - Offsite identification and segregation of certified swine.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... of certified swine. 149.5 Section 149.5 Animals and Animal Products ANIMAL AND PLANT HEALTH... § 149.5 Offsite identification and segregation of certified swine. Certified swine moved from a..., collection point, or slaughter facility, must remain segregated from noncertified swine at all times and...

  13. 9 CFR 149.5 - Offsite identification and segregation of certified swine.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... of certified swine. 149.5 Section 149.5 Animals and Animal Products ANIMAL AND PLANT HEALTH... § 149.5 Offsite identification and segregation of certified swine. Certified swine moved from a..., collection point, or slaughter facility, must remain segregated from noncertified swine at all times and...

  14. Data Processing and Quality Evaluation of a Boat-Based Mobile Laser Scanning System

    PubMed Central

    Vaaja, Matti; Kukko, Antero; Kaartinen, Harri; Kurkela, Matti; Kasvi, Elina; Flener, Claude; Hyyppä, Hannu; Hyyppä, Juha; Järvelä, Juha; Alho, Petteri

    2013-01-01

    Mobile mapping systems (MMSs) are used for mapping topographic and urban features which are difficult and time consuming to measure with other instruments. The benefits of MMSs include efficient data collection and versatile usability. This paper investigates the data processing steps and quality of a boat-based mobile mapping system (BoMMS) data for generating terrain and vegetation points in a river environment. Our aim in data processing was to filter noise points, detect shorelines as well as points below water surface and conduct ground point classification. Previous studies of BoMMS have investigated elevation accuracies and usability in detection of fluvial erosion and deposition areas. The new findings concerning BoMMS data are that the improved data processing approach allows for identification of multipath reflections and shoreline delineation. We demonstrate the possibility to measure bathymetry data in shallow (0–1 m) and clear water. Furthermore, we evaluate for the first time the accuracy of the BoMMS ground points classification compared to manually classified data. We also demonstrate the spatial variations of the ground point density and assess elevation and vertical accuracies of the BoMMS data. PMID:24048340

  15. Data processing and quality evaluation of a boat-based mobile laser scanning system.

    PubMed

    Vaaja, Matti; Kukko, Antero; Kaartinen, Harri; Kurkela, Matti; Kasvi, Elina; Flener, Claude; Hyyppä, Hannu; Hyyppä, Juha; Järvelä, Juha; Alho, Petteri

    2013-09-17

    Mobile mapping systems (MMSs) are used for mapping topographic and urban features which are difficult and time consuming to measure with other instruments. The benefits of MMSs include efficient data collection and versatile usability. This paper investigates the data processing steps and quality of a boat-based mobile mapping system (BoMMS) data for generating terrain and vegetation points in a river environment. Our aim in data processing was to filter noise points, detect shorelines as well as points below water surface and conduct ground point classification. Previous studies of BoMMS have investigated elevation accuracies and usability in detection of fluvial erosion and deposition areas. The new findings concerning BoMMS data are that the improved data processing approach allows for identification of multipath reflections and shoreline delineation. We demonstrate the possibility to measure bathymetry data in shallow (0-1 m) and clear water. Furthermore, we evaluate for the first time the accuracy of the BoMMS ground points classification compared to manually classified data. We also demonstrate the spatial variations of the ground point density and assess elevation and vertical accuracies of the BoMMS data.

  16. Automated Planar Tracking the Waving Bodies of Multiple Zebrafish Swimming in Shallow Water.

    PubMed

    Wang, Shuo Hong; Cheng, Xi En; Qian, Zhi-Ming; Liu, Ye; Chen, Yan Qiu

    2016-01-01

    Zebrafish (Danio rerio) is one of the most widely used model organisms in collective behavior research. Multi-object tracking with high speed camera is currently the most feasible way to accurately measure their motion states for quantitative study of their collective behavior. However, due to difficulties such as their similar appearance, complex body deformation and frequent occlusions, it is a big challenge for an automated system to be able to reliably track the body geometry of each individual fish. To accomplish this task, we propose a novel fish body model that uses a chain of rectangles to represent fish body. Then in detection stage, the point of maximum curvature along fish boundary is detected and set as fish nose point. Afterwards, in tracking stage, we firstly apply Kalman filter to track fish head, then use rectangle chain fitting to fit fish body, which at the same time further judge the head tracking results and remove the incorrect ones. At last, a tracklets relinking stage further solves trajectory fragmentation due to occlusion. Experiment results show that the proposed tracking system can track a group of zebrafish with their body geometry accurately even when occlusion occurs from time to time.

  17. Automated Planar Tracking the Waving Bodies of Multiple Zebrafish Swimming in Shallow Water

    PubMed Central

    Wang, Shuo Hong; Cheng, Xi En; Qian, Zhi-Ming; Liu, Ye; Chen, Yan Qiu

    2016-01-01

    Zebrafish (Danio rerio) is one of the most widely used model organisms in collective behavior research. Multi-object tracking with high speed camera is currently the most feasible way to accurately measure their motion states for quantitative study of their collective behavior. However, due to difficulties such as their similar appearance, complex body deformation and frequent occlusions, it is a big challenge for an automated system to be able to reliably track the body geometry of each individual fish. To accomplish this task, we propose a novel fish body model that uses a chain of rectangles to represent fish body. Then in detection stage, the point of maximum curvature along fish boundary is detected and set as fish nose point. Afterwards, in tracking stage, we firstly apply Kalman filter to track fish head, then use rectangle chain fitting to fit fish body, which at the same time further judge the head tracking results and remove the incorrect ones. At last, a tracklets relinking stage further solves trajectory fragmentation due to occlusion. Experiment results show that the proposed tracking system can track a group of zebrafish with their body geometry accurately even when occlusion occurs from time to time. PMID:27128096

  18. [Waste management in hospitals. Current situation in the state of North Rhine-Westphalia].

    PubMed

    Popp, W; Hansen, D; Hilgenhöner, M; Grandek, M; Heinemann, A; Blättler, T

    2009-07-01

    In 20 hospitals in North Rhine-Westphalia in-plant handling wastes and the delivery of the waste to the disposer were examined. Deficits were seen regarding risk assessment and operating instructions, support by company doctors, personal protection equipment, and break areas for the waste collecting personnel. Also the qualification of the waste management officer and his/her time contingent, correct declaration of the wastes, the training of the waste collecting personnel, the cleaning of multi-use containers and transportation vehicles, storage of the wastes at the collecting points, and the use of sharp collecting boxes were to be partly criticized. Consequences and recommendations are given, concerning the company's obligations (e.g., provide risk assessment, operating instructions), waste management officer (e.g., qualification, enough time contingent, regular inspections), waste collecting personnel (e.g., training courses), industrial safety (e.g., protection equipment, break area wash places), company doctors, transportation vehicles in the house (e.g., regular cleaning), one-way collectors (e.g., labelling at the site of the collection), multi-use collectors (e.g., cleaning), and compressing containers (e.g., larger maintenance openings).

  19. SfM with MRFs: discrete-continuous optimization for large-scale structure from motion.

    PubMed

    Crandall, David J; Owens, Andrew; Snavely, Noah; Huttenlocher, Daniel P

    2013-12-01

    Recent work in structure from motion (SfM) has built 3D models from large collections of images downloaded from the Internet. Many approaches to this problem use incremental algorithms that solve progressively larger bundle adjustment problems. These incremental techniques scale poorly as the image collection grows, and can suffer from drift or local minima. We present an alternative framework for SfM based on finding a coarse initial solution using hybrid discrete-continuous optimization and then improving that solution using bundle adjustment. The initial optimization step uses a discrete Markov random field (MRF) formulation, coupled with a continuous Levenberg-Marquardt refinement. The formulation naturally incorporates various sources of information about both the cameras and points, including noisy geotags and vanishing point (VP) estimates. We test our method on several large-scale photo collections, including one with measured camera positions, and show that it produces models that are similar to or better than those produced by incremental bundle adjustment, but more robustly and in a fraction of the time.

  20. Spatio-temporal evaluation of organic contaminants and their transformation products along a river basin affected by urban, agricultural and industrial pollution.

    PubMed

    Gómez, María José; Herrera, Sonia; Solé, David; García-Calvo, Eloy; Fernández-Alba, Amadeo R

    2012-03-15

    This study aims to assess the occurrence, fate and temporal and spatial distribution of anthropogenic contaminants in a river subjected to different pressures (industrial, agricultural, wastewater discharges). For this purpose, the Henares River basin (central Spain) can be considered a representative basin within a continental Mediterranean climate. As the studied river runs through several residential, industrial and agricultural areas, it would be expected that the chemical water quality is modified along its course. Thereby the selection of sampling points and timing of sample collection are critical factors in the monitoring of a river basin. In this study, six different monitoring campaigns were performed in 2010 and contaminants were measured at the effluent point of the main wastewater treatment plant (WWTP) in the river basin and at five different points upstream and downstream from the WWTP emission point. The target compounds evaluated were personal care products (PCPs), polycyclic aromatic hydrocarbons (PAHs) and pesticides. Results show that the river is clearly influenced by wastewater discharges and also by its proximity to agricultural areas. The contaminants detected at higher concentrations were the PCPs. The spatial distribution of the contaminants indicates that the studied contaminants persist along the river. In the time period studied no great seasonal variations of PCPs at the river collection points were observed. In contrast, a temporal trend of pesticides and PAHs was observed. Besides the target compounds, other new contaminants were identified and evaluated in the water samples, some of them being investigated for the first time in the aquatic environment. The behaviour of three important transformation products was also evaluated: 9,10-anthracenodione, galaxolide-lactone and 4-amino-musk xylene. These were found at higher concentrations than their parent compounds, indicating the significance of including the study of transformation products in the monitoring programmes. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. Salivary flow and alpha-amylase: collection technique, duration, and oral fluid type.

    PubMed

    Beltzer, Emilie K; Fortunato, Christine K; Guaderrama, Melissa M; Peckins, Melissa K; Garramone, Bianca M; Granger, Douglas A

    2010-09-01

    There has been renewed interest in salivary alpha-amylase (sAA), a surrogate marker of autonomic/sympathetic activity, in biosocial research on stress vulnerability, reactivity, and recovery. This study explored the impact of saliva flow rate on sAA measurement by examining the influence of (1) the technique used to collect oral fluid-synthetic swab, cotton pledget, hydrocellulose microsponge, or passive drool; (2) collection point duration--the length of time the technique is employed (1-5min); and (3) oral fluid type--whole unstimulated saliva (not absorbed by any material) or oral fluid sampled from areas near the parotid, submandibular, or sublingual salivary glands. sAA activity (U/mL) was the highest in oral fluid collected from the parotid and submandibular gland areas. The volume (mL) of oral fluid collected increased, and the activity of sAA (U/mL) decreased, as collection point duration lengthened. The magnitude of these effects varied according to collection technique and oral fluid type. Across all conditions, there were positive correlations (range .70-.88) between sAA activity (U/mL) and sAA output (U/min). Management of these potential sources of measurement error will be essential to ensuring the success of future research on the correlates and concomitants of sAA activity, stress-related reactivity and recovery, and diurnal variation. Copyright 2010 Elsevier Inc. All rights reserved.

  2. 77 FR 71472 - Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-30

    ... Chart Point of Sale Survey AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice and... information collection. Aeronautical Chart Point of Sale Survey data will be used by the Federal Aviation... Chart Point of Sale Survey. Form Numbers: There are no FAA forms associated with this collection. Type...

  3. Kerman Photovoltaic Power Plant R&D data collection computer system operations and maintenance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosen, P.B.

    1994-06-01

    The Supervisory Control and Data Acquisition (SCADA) system at the Kerman PV Plant monitors 52 analog, 44 status, 13 control, and 4 accumulator data points in real-time. A Remote Terminal Unit (RTU) polls 7 peripheral data acquisition units that are distributed throughout the plant once every second, and stores all analog, status, and accumulator points that have changed since the last scan. The R&D Computer, which is connected to the SCADA RTU via a RS-232 serial link, polls the RTU once every 5-7 seconds and records any values that have changed since the last scan. A SCADA software package calledmore » RealFlex runs on the R&D computer and stores all updated data values taken from the RTU, along with a time-stamp for each, in a historical real-time database. From this database, averages of all analog data points and snapshots of all status points are generated every 10 minutes and appended to a daily file. These files are downloaded via modem by PVUSA/Davis staff every day, and the data is placed into the PVUSA database.« less

  4. A Descriptive Longitudinal Study of Changes in Vape Shop Characteristics and Store Policies in Anticipation of the 2016 FDA Regulations of Tobacco Products, Including E-Cigarettes.

    PubMed

    Yu, Sheila; Escobedo, Patricia; Garcia, Robert; Cruz, Tess Boley; Unger, Jennifer B; Baezconde-Garbanati, Lourdes; Meza, Leah; Sussman, Steve

    2018-02-11

    After proposing the "Deeming Rule" in 2014, the U.S. Food and Drug Administration (FDA) began regulating the manufacturing, marketing, and sales of electronic cigarette (e-cigarette) products as tobacco products in 2016. The current study conducted vape shop store observations and surveyed Los Angeles-area shop employees (assessing their beliefs, awareness, and perceptions of e-cigarettes and related FDA regulations) at two time points one year apart to better understand what vape shop retailers would do given FDA's soon-to-be-enacted Deeming Rule. The study also compared retailer beliefs/awareness/actions and store characteristics immediately after the Deeming Rule proposal versus a year after the Rule had been proposed, right before its enactment. Two data collection waves occurred before the Deeming Rule enactment, with Year 1 surveying 77 shops (2014) and Year 2 surveying 61 shops (2015-2016). Between the data collection points, 16 shops had closed. Among the shops that were open at both time points, the majority (95% in Year 1; 74% in Year 2) were aware of some FDA regulations or other policies applying to vape shops. However, overall awareness of FDA regulations and state/local policies governing e-cigarettes significantly decreased from Year 1 to Year 2. At both time points, all shops offered customers free puffs of nicotine-containing e-liquids (prohibited by the then upcoming Deeming Rule). Perceptions of e-cigarette safety also significantly decreased between the years. Exploring vape shop retailer perceptions and store policies (i.e., free puffs/samples displays, perceptions of e-cigarette safety, etc.) over time will help the FDA assess the needs of the vape shop community and develop more effective retailer education campaigns and materials targeted to increase compliance with the newly enacted regulations.

  5. A Descriptive Longitudinal Study of Changes in Vape Shop Characteristics and Store Policies in Anticipation of the 2016 FDA Regulations of Tobacco Products, Including E-Cigarettes

    PubMed Central

    Escobedo, Patricia; Baezconde-Garbanati, Lourdes; Meza, Leah; Sussman, Steve

    2018-01-01

    After proposing the “Deeming Rule” in 2014, the U.S. Food and Drug Administration (FDA) began regulating the manufacturing, marketing, and sales of electronic cigarette (e-cigarette) products as tobacco products in 2016. The current study conducted vape shop store observations and surveyed Los Angeles–area shop employees (assessing their beliefs, awareness, and perceptions of e-cigarettes and related FDA regulations) at two time points one year apart to better understand what vape shop retailers would do given FDA’s soon-to-be-enacted Deeming Rule. The study also compared retailer beliefs/awareness/actions and store characteristics immediately after the Deeming Rule proposal versus a year after the Rule had been proposed, right before its enactment. Two data collection waves occurred before the Deeming Rule enactment, with Year 1 surveying 77 shops (2014) and Year 2 surveying 61 shops (2015–2016). Between the data collection points, 16 shops had closed. Among the shops that were open at both time points, the majority (95% in Year 1; 74% in Year 2) were aware of some FDA regulations or other policies applying to vape shops. However, overall awareness of FDA regulations and state/local policies governing e-cigarettes significantly decreased from Year 1 to Year 2. At both time points, all shops offered customers free puffs of nicotine-containing e-liquids (prohibited by the then upcoming Deeming Rule). Perceptions of e-cigarette safety also significantly decreased between the years. Exploring vape shop retailer perceptions and store policies (i.e., free puffs/samples displays, perceptions of e-cigarette safety, etc.) over time will help the FDA assess the needs of the vape shop community and develop more effective retailer education campaigns and materials targeted to increase compliance with the newly enacted regulations. PMID:29439464

  6. A qualitative study on feedback provided by students in nurse education.

    PubMed

    Chan, Zenobia C Y; Stanley, David John; Meadus, Robert J; Chien, Wai Tong

    2017-08-01

    This study aims to help nurse educators/academics understand the perspectives and expectations of students providing their feedback to educators about teaching performance and subject quality. The aim of this study is to reveal students' voices regarding their feedback in nurse education in order to shed light on how the current student feedback practice may be modified. A qualitative study using focus group inquiry. Convenience sampling was adopted and participants recruited from one school of nursing in Hong Kong. A total of 66 nursing students from two pre-registration programs were recruited for seven focus group interviews: one group of Year 1 students (n=21), two groups of Year 3 students (n=27), and four groups of Final Year students (n=18). The interviews were guided by a semi-structured interview guideline and the interview narratives were processed through content analysis. The trustworthiness of this study was guaranteed through peer checking, research meetings, and an audit trail. The participants' privacy was protected throughout the study. Four core themes were discerned based on the narratives of the focus group interviews: (1) "timing of collecting feedback at more than one time point"; (2) "modify the questions being asked in collecting student feedback"; (3) "are electronic means of collecting feedback good enough?; and (4) "what will be next for student feedback?". This study is significant in the following three domains: 1) it contributed to student feedback because it examined the issue from a student's perspective; 2) it explored the timing and channels for collecting feedback from the students' point of view; and 3) it showed the preferred uses of student feedback. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  7. Associations between Repeated Measures of Maternal Urinary Phthalate Metabolites and Thyroid Hormone Parameters during Pregnancy

    PubMed Central

    Johns, Lauren E.; Ferguson, Kelly K.; McElrath, Thomas F.; Mukherjee, Bhramar; Meeker, John D.

    2016-01-01

    Background: Maintaining thyroid homeostasis during pregnancy is essential for normal fetal growth and development. Growing evidence suggests that phthalates interfere with normal thyroid function. Few human studies have investigated the degree to which phthalates may affect thyroid hormone levels in particularly susceptible populations such as pregnant women. Objectives: We examined the associations between repeated measures of urinary phthalate metabolites and plasma thyroid hormone levels in samples collected at up to four time points per subject in pregnancy. Additionally, we investigated the potential windows of susceptibility to thyroid hormone disturbances related to study visit of sample collection. Methods: Data were obtained from pregnant women (n = 439) participating in a nested case–control study of preterm birth with 116 cases and 323 controls. We measured 9 phthalate metabolite concentrations in urine samples collected at up to four study visits per subject during pregnancy (median = 10, 18, 26, and 35 weeks of gestation, respectively). We also measured a panel of thyroid function markers in plasma collected at the same four time points per subject during pregnancy. Results: Although our results were generally null, in repeated measures analyses we observed that phthalate metabolites were largely inversely associated with thyrotropin and positively associated with free and total thyroid hormones. Cross-sectional analyses by study visit revealed that the magnitude and/or direction of these relationships varied by timing of exposure during gestation. Conclusions: These results support previous reports showing the potential for environmental phthalate exposure to alter circulating levels of thyroid hormones in pregnant women. Citation: Johns LE, Ferguson KK, McElrath TF, Mukherjee B, Meeker JD. 2016. Associations between repeated measures of maternal urinary phthalate metabolites and thyroid hormone parameters during pregnancy. Environ Health Perspect 124:1808–1815; http://dx.doi.org/10.1289/EHP170 PMID:27152641

  8. Early intraoperative blood collection does not affect complete blood counts, von Willebrand factor or factor VIII levels in normal children.

    PubMed

    Darwish, Hanni; Mundell, Gillianne; Engen, Dale; Lillicrap, David; Silva, Mariana; James, Paula

    2011-01-01

    Obtaining blood from children for research studies can be difficult, particularly for controls. One solution is to obtain samples during elective surgery; however, consideration must be given to the potential effects of the timing of phlebotomy. Ten children were recruited and phlebotomy was carried out during a preoperative clinic visit and intraoperatively immediately after the induction of anesthesia but before the start of surgery. CBCs, VWF, and FVIII levels were measured at both time points and no significant differences were seen. This negative result may be beneficial to pediatric research by suggesting that early intraoperative blood collection for controls does not affect the results.

  9. Volatile organic compound emissions from the oil and natural gas industry in the Uinta Basin, Utah: point sources compared to ambient air composition

    NASA Astrophysics Data System (ADS)

    Warneke, C.; Geiger, F.; Edwards, P. M.; Dube, W.; Pétron, G.; Kofler, J.; Zahn, A.; Brown, S. S.; Graus, M.; Gilman, J.; Lerner, B.; Peischl, J.; Ryerson, T. B.; de Gouw, J. A.; Roberts, J. M.

    2014-05-01

    The emissions of volatile organic compounds (VOCs) associated with oil and natural gas production in the Uinta Basin, Utah were measured at a ground site in Horse Pool and from a NOAA mobile laboratory with PTR-MS instruments. The VOC compositions in the vicinity of individual gas and oil wells and other point sources such as evaporation ponds, compressor stations and injection wells are compared to the measurements at Horse Pool. High mixing ratios of aromatics, alkanes, cycloalkanes and methanol were observed for extended periods of time and short-term spikes caused by local point sources. The mixing ratios during the time the mobile laboratory spent on the well pads were averaged. High mixing ratios were found close to all point sources, but gas wells using dry-gas collection, which means dehydration happens at the well, were clearly associated with higher mixing ratios than other wells. Another large source was the flowback pond near a recently hydraulically re-fractured gas well. The comparison of the VOC composition of the emissions from the oil and natural gas wells showed that wet gas collection wells compared well with the majority of the data at Horse Pool and that oil wells compared well with the rest of the ground site data. Oil wells on average emit heavier compounds than gas wells. The mobile laboratory measurements confirm the results from an emissions inventory: the main VOC source categories from individual point sources are dehydrators, oil and condensate tank flashing and pneumatic devices and pumps. Raw natural gas is emitted from the pneumatic devices and pumps and heavier VOC mixes from the tank flashings.

  10. Estimation of end of life mobile phones generation: The case study of the Czech Republic

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Polak, Milos, E-mail: mpolak@remasystem.cz; Drapalova, Lenka

    Highlights: Black-Right-Pointing-Pointer In this paper, we define lifespan of mobile phones and estimate their average total lifespan. Black-Right-Pointing-Pointer The estimation of lifespan distribution is based on large sample of EoL mobile phones. Black-Right-Pointing-Pointer Total lifespan of Czech mobile phones is surprisingly long, exactly 7.99 years. Black-Right-Pointing-Pointer In the years 2010-20, about 26.3 million pieces of EoL mobile phones will be generated in the Czech Republic. - Abstract: The volume of waste electrical and electronic equipment (WEEE) has been rapidly growing in recent years. In the European Union (EU), legislation promoting the collection and recycling of WEEE has been in forcemore » since the year 2003. Yet, both current and recently suggested collection targets for WEEE are completely ineffective when it comes to collection and recycling of small WEEE (s-WEEE), with mobile phones as a typical example. Mobile phones are the most sold EEE and at the same time one of appliances with the lowest collection rate. To improve this situation, it is necessary to assess the amount of generated end of life (EoL) mobile phones as precisely as possible. This paper presents a method of assessment of EoL mobile phones generation based on delay model. Within the scope of this paper, the method has been applied on the Czech Republic data. However, this method can be applied also to other EoL appliances in or outside the Czech Republic. Our results show that the average total lifespan of Czech mobile phones is surprisingly long, exactly 7.99 years. We impute long lifespan particularly to a storage time of EoL mobile phones at households, estimated to be 4.35 years. In the years 1990-2000, only 45 thousands of EoL mobile phones were generated in the Czech Republic, while in the years 2000-2010 the number grew to 6.5 million pieces and it is estimated that in the years 2010-2020 about 26.3 million pieces will be generated. Current European legislation sets targets on collection and recycling of WEEE in general, but no specific collection target for EoL mobile phone exists. In the year 2010 only about 3-6% of Czech EoL mobile phones were collected for recovery and recycling. If we make similar estimation using an estimated average EU value, then within the next 10 years about 1.3 billion of EoL mobile phones would be available for recycling in the EU. This amount contains about 31 tonnes of gold and 325 tonnes of silver. Since Europe is dependent on import of many raw materials, efficient recycling of EoL products could help reduce this dependence. To set a working system of collection, it will be necessary to set new and realistic collection targets.« less

  11. Differential BPA levels in sewage wastewater effluents from metro Detroit communities.

    PubMed

    Santos, Julia M; Putt, David A; Jurban, Michael; Joiakim, Aby; Friedrich, Klaus; Kim, Hyesook

    2016-10-01

    The endocrine disruptor Bisphenol A (BPA) is ubiquitous in both aquatic and surface sediment environments because it is continuously released into sewage wastewater effluent. The measurement of BPA at wastewater treatment plants is rarely performed even though the United States Environmental Protection Agency (EPA) states that current levels of environmental BPA could be a threat to aquatic organisms. Therefore, the aims of this study were to measure BPA levels in sewage wastewater at different collection points over a 1-year period and to compare the levels of BPA to 8-isoprostane, a human derived fatty acid, found in sewage wastewater. We analyzed pre-treated sewage samples collected from three source points located in different communities in the metropolitan Detroit area provided by the Detroit Water and Sewerage Department. Human urine samples were also used in the study. BPA and 8-isoprostane were measured using ELISA kits from Detroit R&D, Inc. BPA levels from the same collection point oscillated more than 10-fold over 1 year. Also, BPA levels fluctuated differentially at each collection point. Highly fluctuating BPA values were confirmed by LC/MS/MS. The concentration of BPA in sewage wastewater was ~100-fold higher than the concentration of 8-isoprostane, while urinary concentration was ~20-fold higher. Thus, BPA levels discharged into the sewage network vary among communities, and differences are also observed within communities over time. The difference in BPA and 8-isoprostane levels suggest that most of the BPA discharged to sewage wastewater might be derived from industries rather than from human urine. Therefore, the continuous monitoring of BPA could account for a better regulation of BPA release into a sewage network.

  12. Peripheral phlebitis: a point-prevalence study.

    PubMed

    Washington, Georgita T; Barrett, Robin

    2012-01-01

    The purpose of this research study was to determine the factors influencing peripheral phlebitis in the adult medical-surgical population. The authors would then be able to use those data to determine whether a change in practice was warranted. Data collection and analysis of 188 intravenous sites revealed that females with higher doses of medications in intravenous sites of longer dwell times and suboptimal nutrition were at greater risk of developing peripheral phlebitis. The point prevalence was greater than the recommended 5%, which led the authors to review their facility's patient care and documentation practices.

  13. Self-Similar Spin Images for Point Cloud Matching

    NASA Astrophysics Data System (ADS)

    Pulido, Daniel

    The rapid growth of Light Detection And Ranging (Lidar) technologies that collect, process, and disseminate 3D point clouds have allowed for increasingly accurate spatial modeling and analysis of the real world. Lidar sensors can generate massive 3D point clouds of a collection area that provide highly detailed spatial and radiometric information. However, a Lidar collection can be expensive and time consuming. Simultaneously, the growth of crowdsourced Web 2.0 data (e.g., Flickr, OpenStreetMap) have provided researchers with a wealth of freely available data sources that cover a variety of geographic areas. Crowdsourced data can be of varying quality and density. In addition, since it is typically not collected as part of a dedicated experiment but rather volunteered, when and where the data is collected is arbitrary. The integration of these two sources of geoinformation can provide researchers the ability to generate products and derive intelligence that mitigate their respective disadvantages and combine their advantages. Therefore, this research will address the problem of fusing two point clouds from potentially different sources. Specifically, we will consider two problems: scale matching and feature matching. Scale matching consists of computing feature metrics of each point cloud and analyzing their distributions to determine scale differences. Feature matching consists of defining local descriptors that are invariant to common dataset distortions (e.g., rotation and translation). Additionally, after matching the point clouds they can be registered and processed further (e.g., change detection). The objective of this research is to develop novel methods to fuse and enhance two point clouds from potentially disparate sources (e.g., Lidar and crowdsourced Web 2.0 datasets). The scope of this research is to investigate both scale and feature matching between two point clouds. The specific focus of this research will be in developing a novel local descriptor based on the concept of self-similarity to aid in the scale and feature matching steps. An open problem in fusion is how best to extract features from two point clouds and then perform feature-based matching. The proposed approach for this matching step is the use of local self-similarity as an invariant measure to match features. In particular, the proposed approach is to combine the concept of local self-similarity with a well-known feature descriptor, Spin Images, and thereby define "Self-Similar Spin Images". This approach is then extended to the case of matching two points clouds in very different coordinate systems (e.g., a geo-referenced Lidar point cloud and stereo-image derived point cloud without geo-referencing). The use of Self-Similar Spin Images is again applied to address this problem by introducing a "Self-Similar Keyscale" that matches the spatial scales of two point clouds. Another open problem is how best to detect changes in content between two point clouds. A method is proposed to find changes between two point clouds by analyzing the order statistics of the nearest neighbors between the two clouds, and thereby define the "Nearest Neighbor Order Statistic" method. Note that the well-known Hausdorff distance is a special case as being just the maximum order statistic. Therefore, by studying the entire histogram of these nearest neighbors it is expected to yield a more robust method to detect points that are present in one cloud but not the other. This approach is applied at multiple resolutions. Therefore, changes detected at the coarsest level will yield large missing targets and at finer levels will yield smaller targets.

  14. Experimental determination of material damping using vibration analyzer

    NASA Technical Reports Server (NTRS)

    Chowdhury, Mostafiz R.; Chowdhury, Farida

    1990-01-01

    Structural damping is an important dynamic characteristic of engineering materials that helps to damp vibrations by reducing their amplitudes. In this investigation, an experimental method is illustrated to determine the damping characteristics of engineering materials using a dual channel Fast Fourier Transform (FFT) analyzer. A portable Compaq III computer which houses the analyzer, is used to collect the dynamic responses of three metal rods. Time-domain information is analyzed to obtain the logarithmic decrement of their damping. The damping coefficients are then compared to determine the variation of damping from material to material. The variations of damping from one point to another of the same material, due to a fixed point excitation, and the variable damping at a fixed point due to excitation at different points, are also demonstrated.

  15. Method and system for data clustering for very large databases

    NASA Technical Reports Server (NTRS)

    Livny, Miron (Inventor); Zhang, Tian (Inventor); Ramakrishnan, Raghu (Inventor)

    1998-01-01

    Multi-dimensional data contained in very large databases is efficiently and accurately clustered to determine patterns therein and extract useful information from such patterns. Conventional computer processors may be used which have limited memory capacity and conventional operating speed, allowing massive data sets to be processed in a reasonable time and with reasonable computer resources. The clustering process is organized using a clustering feature tree structure wherein each clustering feature comprises the number of data points in the cluster, the linear sum of the data points in the cluster, and the square sum of the data points in the cluster. A dense region of data points is treated collectively as a single cluster, and points in sparsely occupied regions can be treated as outliers and removed from the clustering feature tree. The clustering can be carried out continuously with new data points being received and processed, and with the clustering feature tree being restructured as necessary to accommodate the information from the newly received data points.

  16. Effects of 100MeV protons delivered at 0.5 or 1cGy/min on the in vivo induction of early and delayed chromosomal damage.

    PubMed

    Rithidech, Kanokporn Noy; Honikel, Louise M; Reungpatthanaphong, Paiboon; Tungjai, Montree; Golightly, Marc; Whorton, Elbert B

    2013-08-30

    Little is known about in vivo cytogenetic effects of protons delivered at the dose and dose rates encountered in space. We determined the effects of 100MeV protons, one of the most abundant type of protons produced during solar particle events (SPE), on the induction of chromosome aberrations (CAs) in bone marrow (BM) cells collected at early (3 and 24h) and late (6 months) time-points from groups of BALB/cJ mice (a known radiosensitive strain) exposed whole-body to 0 (sham-controls), 0.5, or 1.0Gy of 100MeV protons, delivered at 0.5 or 1.0cGy/min. These doses and dose-rates are comparable to those produced during SPE events. Additionally, groups of mice were exposed to 0 or 1Gy of (137)Cs γ rays (delivered at 1cGy/min) as a reference radiation. The kinetics of formation/reduction of gamma-histone 2-AX (γH2AX) were determined in BM cells collected at 1.5, 3, and 24h post-irradiation to assess the early-response. There were five mice per treatment-group per harvest-time. Our data indicated that the kinetics of γH2AX formation/reduction differed, depending on the dose and dose rate of protons. Highly significant numbers of abnormal cells and chromatid breaks (p<0.01), related to those in sham-control groups, were detected in BM cells collected at each time-point, regardless of dose or dose-rate. The finding of significant increases in the frequencies of delayed non-clonal and clonal CAs in BM cells collected at a late time-point from exposed mice suggested that 0.5 or 1Gy of 100MeV protons is capable of inducing genomic instability in BM cells. However, the extent of effects induced by these two low dose rates was comparable. Further, the results showed that the in vivo cytogenetic effects induced by 1Gy of 100MeV protons or (137)Cs γ rays (delivered at 1cGy/min) were similar. Copyright © 2013 Elsevier B.V. All rights reserved.

  17. Macromolecular crystallography with a large format CMOS detector

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nix, Jay C., E-mail: jcnix@lbl.gov

    Recent advances in CMOS technology have allowed the production of large surface area detectors suitable for macromolecular crystallography experiments [1]. The Molecular Biology Consortium (MBC) Beamline 4.2.2 at the Advanced Light Source in Berkeley, CA, has installed a 2952 x 2820 mm RDI CMOS-8M detector with funds from NIH grant S10OD012073. The detector has a 20nsec dead pixel time and performs well with shutterless data collection strategies. The sensor obtains sharp point response and minimal optical distortion by use of a thin fiber-optic plate between the phosphor and sensor module. Shutterless data collections produce high-quality redundant datasets that can bemore » obtained in minutes. The fine-sliced data are suitable for processing in standard crystallographic software packages (XDS, HKL2000, D*TREK, MOSFLM). Faster collection times relative to the previous CCD detector have resulted in a record number of datasets collected in a calendar year and de novo phasing experiments have resulted in publications in both Science and Nature [2,3]. The faster collections are due to a combination of the decreased overhead requirements of shutterless collections combined with exposure times that have decreased by over a factor of 2 for images with comparable signal to noise of the NOIR-1 detector. The overall increased productivity has allowed the development of new beamline capabilities and data collection strategies.« less

  18. Evaluation of the Recognizing and Responding to Suicide Risk Training

    ERIC Educational Resources Information Center

    Jacobson, Jodi Michelle; Osteen, Philip; Jones, Andrea; Berman, Alan

    2012-01-01

    Changes in attitudes, confidence, and practice behaviors were assessed among 452 clinicians who completed the training, Recognizing and Responding to Suicide Risk, and who work with clients at risk for suicide. Data were collected at three time points. Scores on measures of attitudes toward suicide prevention and confidence to work with clients at…

  19. 40 CFR 86.605-88 - Maintenance of records; submittal of information.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., pressure increase across the pump, and the temperature set point of the temperature control system. (2... samples are being collected. (3) Humidity of dilution air. (4) Manufacturer, model, type and serial number..., ambient temperature and humidity. (2) Data and time of day. (ii) In lieu of recording test equipment...

  20. 40 CFR 86.605-88 - Maintenance of records; submittal of information.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., pressure increase across the pump, and the temperature set point of the temperature control system. (2... samples are being collected. (3) Humidity of dilution air. (4) Manufacturer, model, type and serial number..., ambient temperature and humidity. (2) Data and time of day. (ii) In lieu of recording test equipment...

  1. 40 CFR 86.605-88 - Maintenance of records; submittal of information.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., pressure increase across the pump, and the temperature set point of the temperature control system. (2... samples are being collected. (3) Humidity of dilution air. (4) Manufacturer, model, type and serial number..., ambient temperature and humidity. (2) Data and time of day. (ii) In lieu of recording test equipment...

  2. Accommodating Missing Data in Mixture Models for Classification by Opinion-Changing Behavior.

    ERIC Educational Resources Information Center

    Hill, Jennifer L.

    2001-01-01

    Explored the assumptions implicit in models reflecting three different approaches to missing survey response data using opinion data collected from Swiss citizens at four time points over nearly 2 years. Results suggest that the latently ignorable model has the least restrictive structural assumptions. Discusses the idea of "durable…

  3. Design and Outcomes of a "Mothers In Motion" Behavioral Intervention Pilot Study

    ERIC Educational Resources Information Center

    Chang, Mei-Wei; Nitzke, Susan; Brown, Roger

    2010-01-01

    Objective: This paper describes the design and findings of a pilot "Mothers In Motion" (P-"MIM") program. Design: A randomized controlled trial that collected data via telephone interviews and finger stick at 3 time points: baseline and 2 and 8 months post-intervention. Setting: Three Special Supplemental Nutrition Program for…

  4. Focusing on Ejournals (and Blogging at the Same Time)

    ERIC Educational Resources Information Center

    Kaser, Dick

    2009-01-01

    According to the recent survey of Association of Learned and Professional Society Publishers (ALPSP), one of the several top trends in publishing nowadays is the licensing liberalization among publishers. Licensing options now abound and there are various price points for libraries considering new collections. One such example is how SAGE offers…

  5. A Longitudinal Examination of Preservice Teachers' Technological Pedagogical Content Knowledge in the Context of Undergraduate Teacher Education

    ERIC Educational Resources Information Center

    Mouza, Chrystalla; Nandakumar, Ratna; Yilmaz Ozden, Sule; Karchmer-Klein, Rachel

    2017-01-01

    This study used longitudinal data to investigate the development of preservice teachers' Technological Pedagogical Content Knowledge (TPACK) throughout their initial teacher education program in the United States. Quantitative and qualitative data were collected at four different points in time. Findings indicated that teacher preparation…

  6. Multi-Level Information Systems. AIR Forum Paper 1978.

    ERIC Educational Resources Information Center

    Jones, Leighton D.; Trautman, DeForest L.

    To support informational needs of day-to-day and long-range decision-making, many universities have developed their own data collection devices and institutional reporting systems. Often these models only represent a single point in time and do not effectively support needs at college and departmental levels. This paper identifies some of the more…

  7. 76 FR 33275 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-08

    ... storage, conveyor transfer points, bagging and bulk loading and unloading systems. These standards rely on... part shall maintain a file of these measurements, and retain the file for at least two years following... total time, effort, or financial resources expended by persons to generate, maintain, retain, or...

  8. Educational Leadership Effectiveness: A Rasch Analysis

    ERIC Educational Resources Information Center

    Sinnema, Claire; Ludlow, Larry; Robinson, Viviane

    2016-01-01

    Purpose: The purposes of this paper are, first, to establish the psychometric properties of the ELP tool, and, second, to test, using a Rasch item response theory analysis, the hypothesized progression of challenge presented by the items included in the tool. Design/ Methodology/ Approach: Data were collected at two time points through a survey of…

  9. Multi-Point Thomson Scattering Diagnostic for the Helicity Injected Torus

    NASA Astrophysics Data System (ADS)

    Liptac, J. E.; Smith, R. J.; Hoffman, C. S.; Jarboe, T. R.; Nelson, B. A.; Leblanc, B. P.; Phillips, P.

    1999-11-01

    The multi-point Thomson scattering system on the Helicity Injected Torus--II can determine electron temperature and density at 11 radial positions at a single time during the plasma discharge. The system includes components on loan from both PPPL and from the University of Texas. The collection optics and Littrow spectrometer from Princeton, and the 1 GW laser and multi-anode microchannel plate detector from Texas have been integrated into a compact structure, creating a mobile and reliable diagnostic. The mobility of the system allows alignment to occur in a room adjacent to the experiment, greatly reducing the disturbance to normal machine operation. The four main parts of the Thomson scattering system, namely, the laser, the beam line, the collection optics, and the mobile structure are presented and discussed.

  10. Digital Access to a Sky Century at Harvard: Initial Photometry and Astrometry

    NASA Astrophysics Data System (ADS)

    Laycock, S.; Tang, S.; Grindlay, J.; Los, E.; Simcoe, R.; Mink, D.

    2010-10-01

    Digital Access to a Sky Century at Harvard (DASCH) is a project to digitize the collection of ~500,000 glass photographic plates held at Harvard College Observatory. The collection spans the time period from 1880 to 1985, during which time every point on the sky was been observed from 500 to 1000 times. In this paper, we describe the DASCH commissioning run, during which we developed the data-reduction pipeline, characterized the plates and fine-tuned the digitizer's performance and operation. This initial run consisted of 500 plates taken from a variety of different plate series, all containing the open cluster Praeseppe (M44). We report that accurate photometry at the 0.1 mag level is possible on the majority of plates, and demonstrate century-long light curves of various types of variable stars in and around M44. DASCH will generate a public online archive of the entire plate collection, including images, source catalogs, and light curves for nearly all astronomical objects brighter than about 17th magnitude.

  11. Prospective pilots of routine data capture by paediatricians in clinics and validation of the Disabilities Complexity Scale.

    PubMed

    Horridge, Karen A; Mcgarry, Kenneth; Williams, Jane; Whitlingum, Gabriel

    2016-06-01

    To pilot prospective data collection by paediatricians at the point of care across England using a defined terminology set; demonstrate feasibility of data collection and utility of data outputs; and confirm that counting the number of needs per child is valid for quantifying complexity. Paediatricians in 16 hospital and community settings collected and anonymized data. Participants completed a survey regarding the process. Data were analysed using R version 3.1.2. Overall, 8117 needs captured from 1224 consultations were recorded. Sixteen clinicians responded positively about the process and utility of data collection. The sum of needs varied significantly (p<0.01) by level of gross motor function ascertained using the Gross Motor Function Classification System for children with cerebral palsy; epilepsy severity as defined by level of expertise required to manage it; and by severity of intellectual disability. Prospective data collection at the point of clinical care proved possible without disrupting clinics, even for those with the most complex needs, and took the least time when done electronically. Counting the number of needs was easy to do, and quantified complexity in a way that informed clinical care for individuals and related directly to validated scales of functioning. Data outputs could inform more appropriate design and commissioning of quality services. © 2016 Mac Keith Press.

  12. A precision multi-sampler for deep-sea hydrothermal microbial mat studies

    NASA Astrophysics Data System (ADS)

    Breier, J. A.; Gomez-Ibanez, D.; Reddington, E.; Huber, J. A.; Emerson, D.

    2012-12-01

    A new tool was developed for deep-sea microbial mat studies by remotely operated vehicles and was successfully deployed during a cruise to the hydrothermal vent systems of the Mid-Cayman Rise. The Mat Sampler allows for discrete, controlled material collection from complex microbial structures, vertical-profiling within thick microbial mats and particulate and fluid sample collection from venting seafloor fluids. It has a reconfigurable and expandable sample capacity based on magazines of 6 syringes, filters, or water bottles. Multiple magazines can be used such that 12-36 samples can be collected routinely during a single dive; several times more if the dive is dedicated for this purpose. It is capable of hosting in situ physical, electrochemical, and optical sensors, including temperature and oxygen probes in order to guide sampling and to record critical environmental parameters at the time and point of sample collection. The precision sampling capability of this instrument will greatly enhance efforts to understand the structured, delicate, microbial mat communities that grow in diverse benthic habitats.

  13. Topical nasal decongestant oxymetazoline (0.05%) provides relief of nasal symptoms for 12 hours.

    PubMed

    Druce, H M; Ramsey, D L; Karnati, S; Carr, A N

    2018-05-22

    Nasal congestion, often referred to as stuffy nose or blocked nose is one of the most prevalent and bothersome symptoms of an upper respiratory tract infection. Oxymetazoline, a widely used intranasal decongestant, offers fast symptom relief, but little is known about the duration of effect. The results of 2 randomized, double-blind, vehicle-controlled, single-dose, parallel, clinical studies (Study 1, n=67; Study 2, n=61) in which the efficacy of an oxymetazoline (0.05% Oxy) nasal spray in patients with acute coryzal rhinitis was assessed over a 12-hour time-period. Data were collected on both subjective relief of nasal congestion (6-point nasal congestion scale) and objective measures of nasal patency (anterior rhinomanometry) in both studies. A pooled study analysis showed statistically significant changes from baseline in subjective nasal congestion for 0.05% oxymetazoline and vehicle at each hourly time-point from Hour 1 through Hour 12 (marginally significant at Hour 11). An objective measure of nasal flow was statistically significant at each time-point up to 12 hours. Adverse events on either treatment were infrequent. The number of subjects who achieved an improvement in subjective nasal congestion scores of at least 1.0 was significantly higher in the Oxy group vs. vehicle at all hourly time-points on a 6-point nasal congestion scale. This study shows for the first time, that oxymetazoline provides both statistically significant and clinically meaningful relief of nasal congestion and improves nasal airflow for up to 12 hours following a single dose.

  14. Accuracy assessment of the Precise Point Positioning method applied for surveys and tracking moving objects in GIS environment

    NASA Astrophysics Data System (ADS)

    Ilieva, Tamara; Gekov, Svetoslav

    2017-04-01

    The Precise Point Positioning (PPP) method gives the users the opportunity to determine point locations using a single GNSS receiver. The accuracy of the determined by PPP point locations is better in comparison to the standard point positioning, due to the precise satellite orbit and clock corrections that are developed and maintained by the International GNSS Service (IGS). The aim of our current research is the accuracy assessment of the PPP method applied for surveys and tracking moving objects in GIS environment. The PPP data is collected by using preliminary developed by us software application that allows different sets of attribute data for the measurements and their accuracy to be used. The results from the PPP measurements are directly compared within the geospatial database to different other sets of terrestrial data - measurements obtained by total stations, real time kinematic and static GNSS.

  15. Outdoor Illegal Construction Identification Algorithm Based on 3D Point Cloud Segmentation

    NASA Astrophysics Data System (ADS)

    An, Lu; Guo, Baolong

    2018-03-01

    Recently, various illegal constructions occur significantly in our surroundings, which seriously restrict the orderly development of urban modernization. The 3D point cloud data technology is used to identify the illegal buildings, which could address the problem above effectively. This paper proposes an outdoor illegal construction identification algorithm based on 3D point cloud segmentation. Initially, in order to save memory space and reduce processing time, a lossless point cloud compression method based on minimum spanning tree is proposed. Then, a ground point removing method based on the multi-scale filtering is introduced to increase accuracy. Finally, building clusters on the ground can be obtained using a region growing method, as a result, the illegal construction can be marked. The effectiveness of the proposed algorithm is verified using a publicly data set collected from the International Society for Photogrammetry and Remote Sensing (ISPRS).

  16. Can a Simple Dietary Index Derived from a Sub-Set of Questionnaire Items Assess Diet Quality in a Sample of Australian Adults?

    PubMed Central

    Trapp, Georgina S. A.; Knuiman, Matthew; Hooper, Paula; Ambrosini, Gina L.

    2018-01-01

    Large, longitudinal surveys often lack consistent dietary data, limiting the use of existing tools and methods that are available to measure diet quality. This study describes a method that was used to develop a simple index for ranking individuals according to their diet quality in a longitudinal study. The RESIDential Environments (RESIDE) project (2004–2011) collected dietary data in varying detail, across four time points. The most detailed dietary data were collected using a 24-item questionnaire at the final time point (n = 555; age ≥ 25 years). At preceding time points, sub-sets of the 24 items were collected. A RESIDE dietary guideline index (RDGI) that was based on the 24-items was developed to assess diet quality in relation to the Australian Dietary Guidelines. The RDGI scores were regressed on the longitudinal sub-sets of six and nine questionnaire items at T4, from which two simple index scores (S-RDGI1 and S-RDGI2) were predicted. The S-RDGI1 and S-RDGI2 showed reasonable agreement with the RDGI (Spearman’s rho = 0.78 and 0.84; gross misclassification = 1.8%; correct classification = 64.9% and 69.7%; and, Cohen’s weighted kappa = 0.58 and 0.64, respectively). For all of the indices, higher diet quality was associated with being female, undertaking moderate to high amounts of physical activity, not smoking, and self-reported health. The S-RDGI1 and S-RDGI2 explained 62% and 73% of the variation in RDGI scores, demonstrating that a large proportion of the variability in diet quality scores can be captured using a relatively small sub-set of questionnaire items. The methods described in this study can be applied elsewhere, in situations where limited dietary data are available, to generate a sample-specific score for ranking individuals according to diet quality. PMID:29652828

  17. Can a Simple Dietary Index Derived from a Sub-Set of Questionnaire Items Assess Diet Quality in a Sample of Australian Adults?

    PubMed

    Bivoltsis, Alexia; Trapp, Georgina S A; Knuiman, Matthew; Hooper, Paula; Ambrosini, Gina L

    2018-04-13

    Large, longitudinal surveys often lack consistent dietary data, limiting the use of existing tools and methods that are available to measure diet quality. This study describes a method that was used to develop a simple index for ranking individuals according to their diet quality in a longitudinal study. The RESIDential Environments (RESIDE) project (2004-2011) collected dietary data in varying detail, across four time points. The most detailed dietary data were collected using a 24-item questionnaire at the final time point ( n = 555; age ≥ 25 years). At preceding time points, sub-sets of the 24 items were collected. A RESIDE dietary guideline index (RDGI) that was based on the 24-items was developed to assess diet quality in relation to the Australian Dietary Guidelines. The RDGI scores were regressed on the longitudinal sub-sets of six and nine questionnaire items at T4, from which two simple index scores (S-RDGI1 and S-RDGI2) were predicted. The S-RDGI1 and S-RDGI2 showed reasonable agreement with the RDGI (Spearman's rho = 0.78 and 0.84; gross misclassification = 1.8%; correct classification = 64.9% and 69.7%; and, Cohen's weighted kappa = 0.58 and 0.64, respectively). For all of the indices, higher diet quality was associated with being female, undertaking moderate to high amounts of physical activity, not smoking, and self-reported health. The S-RDGI1 and S-RDGI2 explained 62% and 73% of the variation in RDGI scores, demonstrating that a large proportion of the variability in diet quality scores can be captured using a relatively small sub-set of questionnaire items. The methods described in this study can be applied elsewhere, in situations where limited dietary data are available, to generate a sample-specific score for ranking individuals according to diet quality.

  18. Automated time activity classification based on global positioning system (GPS) tracking data

    PubMed Central

    2011-01-01

    Background Air pollution epidemiological studies are increasingly using global positioning system (GPS) to collect time-location data because they offer continuous tracking, high temporal resolution, and minimum reporting burden for participants. However, substantial uncertainties in the processing and classifying of raw GPS data create challenges for reliably characterizing time activity patterns. We developed and evaluated models to classify people's major time activity patterns from continuous GPS tracking data. Methods We developed and evaluated two automated models to classify major time activity patterns (i.e., indoor, outdoor static, outdoor walking, and in-vehicle travel) based on GPS time activity data collected under free living conditions for 47 participants (N = 131 person-days) from the Harbor Communities Time Location Study (HCTLS) in 2008 and supplemental GPS data collected from three UC-Irvine research staff (N = 21 person-days) in 2010. Time activity patterns used for model development were manually classified by research staff using information from participant GPS recordings, activity logs, and follow-up interviews. We evaluated two models: (a) a rule-based model that developed user-defined rules based on time, speed, and spatial location, and (b) a random forest decision tree model. Results Indoor, outdoor static, outdoor walking and in-vehicle travel activities accounted for 82.7%, 6.1%, 3.2% and 7.2% of manually-classified time activities in the HCTLS dataset, respectively. The rule-based model classified indoor and in-vehicle travel periods reasonably well (Indoor: sensitivity > 91%, specificity > 80%, and precision > 96%; in-vehicle travel: sensitivity > 71%, specificity > 99%, and precision > 88%), but the performance was moderate for outdoor static and outdoor walking predictions. No striking differences in performance were observed between the rule-based and the random forest models. The random forest model was fast and easy to execute, but was likely less robust than the rule-based model under the condition of biased or poor quality training data. Conclusions Our models can successfully identify indoor and in-vehicle travel points from the raw GPS data, but challenges remain in developing models to distinguish outdoor static points and walking. Accurate training data are essential in developing reliable models in classifying time-activity patterns. PMID:22082316

  19. Automated time activity classification based on global positioning system (GPS) tracking data.

    PubMed

    Wu, Jun; Jiang, Chengsheng; Houston, Douglas; Baker, Dean; Delfino, Ralph

    2011-11-14

    Air pollution epidemiological studies are increasingly using global positioning system (GPS) to collect time-location data because they offer continuous tracking, high temporal resolution, and minimum reporting burden for participants. However, substantial uncertainties in the processing and classifying of raw GPS data create challenges for reliably characterizing time activity patterns. We developed and evaluated models to classify people's major time activity patterns from continuous GPS tracking data. We developed and evaluated two automated models to classify major time activity patterns (i.e., indoor, outdoor static, outdoor walking, and in-vehicle travel) based on GPS time activity data collected under free living conditions for 47 participants (N = 131 person-days) from the Harbor Communities Time Location Study (HCTLS) in 2008 and supplemental GPS data collected from three UC-Irvine research staff (N = 21 person-days) in 2010. Time activity patterns used for model development were manually classified by research staff using information from participant GPS recordings, activity logs, and follow-up interviews. We evaluated two models: (a) a rule-based model that developed user-defined rules based on time, speed, and spatial location, and (b) a random forest decision tree model. Indoor, outdoor static, outdoor walking and in-vehicle travel activities accounted for 82.7%, 6.1%, 3.2% and 7.2% of manually-classified time activities in the HCTLS dataset, respectively. The rule-based model classified indoor and in-vehicle travel periods reasonably well (Indoor: sensitivity > 91%, specificity > 80%, and precision > 96%; in-vehicle travel: sensitivity > 71%, specificity > 99%, and precision > 88%), but the performance was moderate for outdoor static and outdoor walking predictions. No striking differences in performance were observed between the rule-based and the random forest models. The random forest model was fast and easy to execute, but was likely less robust than the rule-based model under the condition of biased or poor quality training data. Our models can successfully identify indoor and in-vehicle travel points from the raw GPS data, but challenges remain in developing models to distinguish outdoor static points and walking. Accurate training data are essential in developing reliable models in classifying time-activity patterns.

  20. Flow rate logging seepage meter

    NASA Technical Reports Server (NTRS)

    Reay, William G. (Inventor); Walthall, Harry G. (Inventor)

    1996-01-01

    An apparatus for remotely measuring and logging the flow rate of groundwater seepage into surface water bodies. As groundwater seeps into a cavity created by a bottomless housing, it displaces water through an inlet and into a waterproof sealed upper compartment, at which point, the water is collected by a collection bag, which is contained in a bag chamber. A magnet on the collection bag approaches a proximity switch as the collection bag fills, and eventually enables the proximity switch to activate a control circuit. The control circuit then rotates a three-way valve from the collection path to a discharge path, enables a data logger to record the time, and enables a pump, which discharges the water from the collection bag, through the three-way valve and pump, and into the sea. As the collection bag empties, the magnet leaves the proximity of the proximity switch, and the control circuit turns off the pump, resets the valve to provide a collection path, and restarts the collection cycle.

  1. Performance Evaluation of sUAS Equipped with Velodyne HDL-32E LiDAR Sensor

    NASA Astrophysics Data System (ADS)

    Jozkow, G.; Wieczorek, P.; Karpina, M.; Walicka, A.; Borkowski, A.

    2017-08-01

    The Velodyne HDL-32E laser scanner is used more frequently as main mapping sensor in small commercial UASs. However, there is still little information about the actual accuracy of point clouds collected with such UASs. This work evaluates empirically the accuracy of the point cloud collected with such UAS. Accuracy assessment was conducted in four aspects: impact of sensors on theoretical point cloud accuracy, trajectory reconstruction quality, and internal and absolute point cloud accuracies. Theoretical point cloud accuracy was evaluated by calculating 3D position error knowing errors of used sensors. The quality of trajectory reconstruction was assessed by comparing position and attitude differences from forward and reverse EKF solution. Internal and absolute accuracies were evaluated by fitting planes to 8 point cloud samples extracted for planar surfaces. In addition, the absolute accuracy was also determined by calculating point 3D distances between LiDAR UAS and reference TLS point clouds. Test data consisted of point clouds collected in two separate flights performed over the same area. Executed experiments showed that in tested UAS, the trajectory reconstruction, especially attitude, has significant impact on point cloud accuracy. Estimated absolute accuracy of point clouds collected during both test flights was better than 10 cm, thus investigated UAS fits mapping-grade category.

  2. Workload and Marital Satisfaction over Time: Testing Lagged Spillover and Crossover Effects during the Newlywed Years.

    PubMed

    Lavner, Justin A; Clark, Malissa A

    2017-08-01

    Although many studies have found that higher workloads covary with lower levels of marital satisfaction, the question of whether workloads may also predict changes in marital satisfaction over time has been overlooked. To address this question, we investigated the lagged association between own and partner workload and marital satisfaction using eight waves of data collected every 6 months over the first four years of marriage from 172 heterosexual couples. Significant crossover, but not spillover, effects were found, indicating that partners of individuals with higher workloads at one time point experience greater declines in marital satisfaction by the following time point compared to the partners of individuals with lower workloads. These effects were not moderated by gender or parental status. These findings suggest that higher partner workloads can prove deleterious for relationship functioning over time and call for increased attention to the long-term effects of spillover and crossover from work to marital functioning.

  3. A general method to determine sampling windows for nonlinear mixed effects models with an application to population pharmacokinetic studies.

    PubMed

    Foo, Lee Kien; McGree, James; Duffull, Stephen

    2012-01-01

    Optimal design methods have been proposed to determine the best sampling times when sparse blood sampling is required in clinical pharmacokinetic studies. However, the optimal blood sampling time points may not be feasible in clinical practice. Sampling windows, a time interval for blood sample collection, have been proposed to provide flexibility in blood sampling times while preserving efficient parameter estimation. Because of the complexity of the population pharmacokinetic models, which are generally nonlinear mixed effects models, there is no analytical solution available to determine sampling windows. We propose a method for determination of sampling windows based on MCMC sampling techniques. The proposed method attains a stationary distribution rapidly and provides time-sensitive windows around the optimal design points. The proposed method is applicable to determine sampling windows for any nonlinear mixed effects model although our work focuses on an application to population pharmacokinetic models. Copyright © 2012 John Wiley & Sons, Ltd.

  4. "Batch" kinetics in flow: online IR analysis and continuous control.

    PubMed

    Moore, Jason S; Jensen, Klavs F

    2014-01-07

    Currently, kinetic data is either collected under steady-state conditions in flow or by generating time-series data in batch. Batch experiments are generally considered to be more suitable for the generation of kinetic data because of the ability to collect data from many time points in a single experiment. Now, a method that rapidly generates time-series reaction data from flow reactors by continuously manipulating the flow rate and reaction temperature has been developed. This approach makes use of inline IR analysis and an automated microreactor system, which allowed for rapid and tight control of the operating conditions. The conversion/residence time profiles at several temperatures were used to fit parameters to a kinetic model. This method requires significantly less time and a smaller amount of starting material compared to one-at-a-time flow experiments, and thus allows for the rapid generation of kinetic data. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Chirp-Z analysis for sol-gel transition monitoring.

    PubMed

    Martinez, Loïc; Caplain, Emmanuel; Serfaty, Stéphane; Griesmar, Pascal; Gouedard, Gérard; Gindre, Marcel

    2004-04-01

    Gelation is a complex reaction that transforms a liquid medium into a solid one: the gel. In gel state, some gel materials (DMAP) have the singular property to ring in an audible frequency range when a pulse is applied. Before the gelation point, there is no transmission of slow waves observed; after the gelation point, the speed of sound in the gel rapidly increases from 0.1 to 10 m/s. The time evolution of the speed of sound can be measured, in frequency domain, by following the frequency spacing of the resonance peaks from the Synchronous Detection (SD) measurement method. Unfortunately, due to a constant frequency sampling rate, the relative error for low speeds (0.1 m/s) is 100%. In order to maintain a low constant relative error, in the whole speed time evolution range, Chirp-Z Transform (CZT) is used. This operation transforms a time variant signal to a time invariant one using only a time dependant stretching factor (S). In the frequency domain, the CZT enables us to stretch each collected spectrum from time signals. The blind identification of the S factor gives us the complete time evolution law of the speed of sound. Moreover, this method proves that the frequency bandwidth follows the same time law. These results point out that the minimum wavelength stays constant and that it only depends on the gel.

  6. Hydrodynamic measurements in Suisun Bay, California, 1992-93

    USGS Publications Warehouse

    Gartner, Jeffrey W.; Burau, Jon R.

    1999-01-01

    Sea level, velocity, temperature, and salinity (conductivity and temperature) data collected in Suisun Bay, California, from December 11, 1992, through May 31, 1993, by the U.S. Geological Survey are documented in this report. Sea-level data were collected at four locations and temperature and salinity data were collected at seven locations. Velocity data were collected at three locations using acoustic Doppler current profilers and at four other locations using point velocity meters. Sea-level and velocity data are presented in three forms (1) harmonic analysis results, (2) time-series plots (sea level, current speed, and current direction versus time), and (3) time-series plots of the low-pass filtered data. Temperature and salinity data are presented as plots of raw and low-pass filtered time series. The velocity and salinity data collected during this study document a period when the residual current patterns and salt field were significantly altered by large Delta outflow (three peaks in excess of 2,000 cubic meters per second). Residual current profiles were consistently seaward with magnitudes that fluctuated primarily in concert with Delta outflow and secondarily with the spring-neap tide cycle. The freshwater inputs advected salinity seaward of Suisun Bay for most of this study. Except for a 10-day period at the beginning of the study, dynamically significant salinities (>2) were seaward of Suisun Bay, which resulted in little or no gravitational circulation transport.

  7. Sea-floor-mounted rotating side-scan sonar for making time-lapse sonographs

    USGS Publications Warehouse

    Rubin, David M.; McCulloch, David S.; Hill, H. R.

    1983-01-01

    Records that are collected with this system offer several advantages over records that are collected with towed systems. Bottom features are presented in nearly true plan geometry, and transducer yaw, pitch, and roll are eliminated. Most importantly, repeated observations can be made from a single point, and bedform movements of <50 cm can be measured. In quiet seas the maximum useful range of the system varies from 30 m (for mapping ripples) to 200 m (for mapping 10-m wavelength sand waves) to 450 m or more (for mapping gravel patches).

  8. Generation of coherent magnons in NiO stimulated by EUV pulses from a seeded free-electron laser

    NASA Astrophysics Data System (ADS)

    Simoncig, A.; Mincigrucci, R.; Principi, E.; Bencivenga, F.; Calvi, A.; Foglia, L.; Kurdi, G.; Matruglio, A.; Dal Zilio, S.; Masciotti, V.; Lazzarino, M.; Masciovecchio, C.

    2017-12-01

    The full comprehension of magnetic phenomena at the femtosecond (fs) time scale is of high demand for current material science and technology. Here we report the observation of coherent collective modes in the antiferromagnetic insulator nickel oxide (NiO) identified by a frequency of 0.86 THz, which matches the expected out-of-plane single-mode magnon resonance. Such collective excitations are inelastically stimulated by extreme ultraviolet (EUV) pulses delivered by a seeded free-electron laser (FEL) and subsequently revealed probing the transient optical activity of NiO looking at the Faraday effect. Moreover, the unique capability of the employed FEL source to deliver circularly polarized pulses allows us to demonstrate optomagnetic control of such collective modes at EUV photon energies. These results may set a starting point for future investigations of magnetic materials at time scales comparable or faster than those typical of exchange interactions.

  9. Coincidence of collective relaxation anomaly and specific heat peak in a bulk metallic glass-forming liquid

    DOE PAGES

    Jaiswal, Abhishek; Podlesynak, Andrey; Ehlers, Georg; ...

    2015-07-21

    The study of multicomponent metallic liquids' relaxational behavior is still the key to understanding and improving the glass-forming abilities of bulk metallic glasses. Here, we report measurements of the collective relaxation times in a melted bulk metallic glass (LM601Zr 51Cu 36Ni 4Al 9) in the kinetic regime (Q: 1.5–4.0Å –1) using quasielastic neutron scattering. The results reveal an unusual slope change in the Angell plots of this metallic liquid's collective relaxation time around 950°C, beyond the material's melting point. Measurement of specific heat capacity also reveals a peak around the same temperature. Adams-Gibbs theory is used to rationalize the coincidence,more » which motivates more careful experimental and computational studies of the metallic liquids in the future.« less

  10. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ma, R; Zhu, X; Li, S

    Purpose: High Dose Rate (HDR) brachytherapy forward planning is principally an iterative process; hence, plan quality is affected by planners’ experiences and limited planning time. Thus, this may lead to sporadic errors and inconsistencies in planning. A statistical tool based on previous approved clinical treatment plans would help to maintain the consistency of planning quality and improve the efficiency of second checking. Methods: An independent dose calculation tool was developed from commercial software. Thirty-three previously approved cervical HDR plans with the same prescription dose (550cGy), applicator type, and treatment protocol were examined, and ICRU defined reference point doses (bladder, vaginalmore » mucosa, rectum, and points A/B) along with dwell times were collected. Dose calculation tool then calculated appropriate range with a 95% confidence interval for each parameter obtained, which would be used as the benchmark for evaluation of those parameters in future HDR treatment plans. Model quality was verified using five randomly selected approved plans from the same dataset. Results: Dose variations appears to be larger at the reference point of bladder and mucosa as compared with rectum. Most reference point doses from verification plans fell between the predicted range, except the doses of two points of rectum and two points of reference position A (owing to rectal anatomical variations & clinical adjustment in prescription points, respectively). Similar results were obtained for tandem and ring dwell times despite relatively larger uncertainties. Conclusion: This statistical tool provides an insight into clinically acceptable range of cervical HDR plans, which could be useful in plan checking and identifying potential planning errors, thus improving the consistency of plan quality.« less

  11. New clinical insights for transiently evoked otoacoustic emission protocols.

    PubMed

    Hatzopoulos, Stavros; Grzanka, Antoni; Martini, Alessandro; Konopka, Wieslaw

    2009-08-01

    The objective of the study was to optimize the area of a time-frequency analysis and then investigate any stable patterns in the time-frequency structure of otoacoustic emissions in a population of 152 healthy adults sampled over one year. TEOAE recordings were collected from 302 ears in subjects presenting normal hearing and normal impedance values. The responses were analyzed by the Wigner-Ville distribution (WVD). The TF region of analysis was optimized by examining the energy content of various rectangular and triangular TF regions. The TEOAE components from the initial and recordings 12 months later were compared in the optimized TF region. The best region for TF analysis was identified with base point 1 at 2.24 ms and 2466 Hz, base point 2 at 6.72 ms and 2466 Hz, and the top point at 2.24 ms and 5250 Hz. Correlation indices from the TF optimized region were higher, and were statistically significant, than the traditional indices in the selected time window. An analysis of the TF data within a 12-month period indicated a 85% TEOAE component similarity in 90% of the tested subjects.

  12. Estimating occupancy and abundance using aerial images with imperfect detection

    USGS Publications Warehouse

    Williams, Perry J.; Hooten, Mevin B.; Womble, Jamie N.; Bower, Michael R.

    2017-01-01

    Species distribution and abundance are critical population characteristics for efficient management, conservation, and ecological insight. Point process models are a powerful tool for modelling distribution and abundance, and can incorporate many data types, including count data, presence-absence data, and presence-only data. Aerial photographic images are a natural tool for collecting data to fit point process models, but aerial images do not always capture all animals that are present at a site. Methods for estimating detection probability for aerial surveys usually include collecting auxiliary data to estimate the proportion of time animals are available to be detected.We developed an approach for fitting point process models using an N-mixture model framework to estimate detection probability for aerial occupancy and abundance surveys. Our method uses multiple aerial images taken of animals at the same spatial location to provide temporal replication of sample sites. The intersection of the images provide multiple counts of individuals at different times. We examined this approach using both simulated and real data of sea otters (Enhydra lutris kenyoni) in Glacier Bay National Park, southeastern Alaska.Using our proposed methods, we estimated detection probability of sea otters to be 0.76, the same as visual aerial surveys that have been used in the past. Further, simulations demonstrated that our approach is a promising tool for estimating occupancy, abundance, and detection probability from aerial photographic surveys.Our methods can be readily extended to data collected using unmanned aerial vehicles, as technology and regulations permit. The generality of our methods for other aerial surveys depends on how well surveys can be designed to meet the assumptions of N-mixture models.

  13. Using phone sensors and an artificial neural network to detect gait changes during drinking episodes in the natural environment.

    PubMed

    Suffoletto, Brian; Gharani, Pedram; Chung, Tammy; Karimi, Hassan

    2018-02-01

    Phone sensors could be useful in assessing changes in gait that occur with alcohol consumption. This study determined (1) feasibility of collecting gait-related data during drinking occasions in the natural environment, and (2) how gait-related features measured by phone sensors relate to estimated blood alcohol concentration (eBAC). Ten young adult heavy drinkers were prompted to complete a 5-step gait task every hour from 8pm to 12am over four consecutive weekends. We collected 3-axis accelerometer, gyroscope, and magnetometer data from phone sensors, and computed 24 gait-related features using a sliding window technique. eBAC levels were calculated at each time point based on Ecological Momentary Assessment (EMA) of alcohol use. We used an artificial neural network model to analyze associations between sensor features and eBACs in training (70% of the data) and validation and test (30% of the data) datasets. We analyzed 128 data points where both eBAC and gait-related sensor data were captured, either when not drinking (n=60), while eBAC was ascending (n=55) or eBAC was descending (n=13). 21 data points were captured at times when the eBAC was greater than the legal limit (0.08mg/dl). Using a Bayesian regularized neural network, gait-related phone sensor features showed a high correlation with eBAC (Pearson's r>0.9), and >95% of estimated eBAC would fall between -0.012 and +0.012 of actual eBAC. It is feasible to collect gait-related data from smartphone sensors during drinking occasions in the natural environment. Sensor-based features can be used to infer gait changes associated with elevated blood alcohol content. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. The effects of gamelike features and test location on cognitive test performance and participant enjoyment

    PubMed Central

    Skinner, Andy; Woods, Andy T.; Lawrence, Natalia S.; Munafò, Marcus

    2016-01-01

    Computerised cognitive assessments are a vital tool in the behavioural sciences, but participants often view them as effortful and unengaging. One potential solution is to add gamelike elements to these tasks in order to make them more intrinsically enjoyable, and some researchers have posited that a more engaging task might produce higher quality data. This assumption, however, remains largely untested. We investigated the effects of gamelike features and test location on the data and enjoyment ratings from a simple cognitive task. We tested three gamified variants of the Go-No-Go task, delivered both in the laboratory and online. In the first version of the task participants were rewarded with points for performing optimally. The second version of the task was framed as a cowboy shootout. The third version was a standard Go-No-Go task, used as a control condition. We compared reaction time, accuracy and subjective measures of enjoyment and engagement between task variants and study location. We found points to be a highly suitable game mechanic for gamified cognitive testing because they did not disrupt the validity of the data collected but increased participant enjoyment. However, we found no evidence that gamelike features could increase engagement to the point where participant performance improved. We also found that while participants enjoyed the cowboy themed task, the difficulty of categorising the gamelike stimuli adversely affected participant performance, increasing No-Go error rates by 28% compared to the non-game control. Responses collected online vs. in the laboratory had slightly longer reaction times but were otherwise very similar, supporting other findings that online crowdsourcing is an acceptable method of data collection for this type of research. PMID:27441120

  15. Time-Resolved PIV for Space-Time Correlations in Hot Jets

    NASA Technical Reports Server (NTRS)

    Wernet, Mark P.

    2007-01-01

    Temporally Resolved Particle Image Velocimetry (TR-PIV) is being used to characterize the decay of turbulence in jet flows a critical element for understanding the acoustic properties of the flow. A TR-PIV system, developed in-house at the NASA Glenn Research Center, is capable of acquiring planar PIV image frame pairs at up to 10 kHz. The data reported here were collected at Mach numbers of 0.5 and 0.9 and at temperature ratios of 0.89 and 1.76. The field of view of the TR-PIV system covered 6 nozzle diameters along the lip line of the 50.8 mm diameter jet. The cold flow data at Mach 0.5 were compared with hotwire anemometry measurements in order to validate the new TR-PIV technique. The axial turbulence profiles measured across the shear layer using TR-PIV were thinner than those measured using hotwire anemometry and remained centered along the nozzle lip line. The collected TR-PIV data illustrate the differences in the single point statistical flow properties of cold and hot jet flows. The planar, time-resolved velocity records were then used to compute two-point space-time correlations of the flow at the Mach 0.9 flow condition. The TR-PIV results show that there are differences in the convective velocity and growth rate of the turbulent structures between cold and hot flows at the same Mach number.

  16. The Importance and Role of Intracluster Correlations in Planning Cluster Trials

    PubMed Central

    Preisser, John S.; Reboussin, Beth A.; Song, Eun-Young; Wolfson, Mark

    2008-01-01

    There is increasing recognition of the critical role of intracluster correlations of health behavior outcomes in cluster intervention trials. This study examines the estimation, reporting, and use of intracluster correlations in planning cluster trials. We use an estimating equations approach to estimate the intracluster correlations corresponding to the multiple-time-point nested cross-sectional design. Sample size formulae incorporating 2 types of intracluster correlations are examined for the purpose of planning future trials. The traditional intracluster correlation is the correlation among individuals within the same community at a specific time point. A second type is the correlation among individuals within the same community at different time points. For a “time × condition” analysis of a pretest–posttest nested cross-sectional trial design, we show that statistical power considerations based upon a posttest-only design generally are not an adequate substitute for sample size calculations that incorporate both types of intracluster correlations. Estimation, reporting, and use of intracluster correlations are illustrated for several dichotomous measures related to underage drinking collected as part of a large nonrandomized trial to enforce underage drinking laws in the United States from 1998 to 2004. PMID:17879427

  17. Pharmacokinetics of a concentrated buprenorphine formulation in red-tailed hawks (Buteo jamaicensis).

    PubMed

    Gleeson, Molly D; Guzman, David Sanchez-Migallon; Knych, Heather K; Kass, Philip H; Drazenovich, Tracy L; Hawkins, Michelle G

    2018-01-01

    OBJECTIVE To determine the pharmacokinetics and sedative effects of 2 doses of a concentrated buprenorphine formulation after SC administration to red-tailed hawks (Buteo jamaicensis). ANIMALS 6 adult red-tailed hawks. PROCEDURES Concentrated buprenorphine (0.3 mg/kg, SC) was administered to all birds. Blood samples were collected at 10 time points over 24 hours after drug administration to determine plasma buprenorphine concentrations. After a 4-week washout period, the same birds received the same formulation at a higher dose (1.8 mg/kg, SC), and blood samples were collected at 13 time points over 96 hours. Hawks were monitored for adverse effects and assigned agitation-sedation scores at each sample collection time. Plasma buprenorphine concentrations were quantified by liquid chromatography-tandem mass spectrometry. RESULTS Mean time to maximum plasma buprenorphine concentration was 7.2 minutes and 26.1 minutes after administration of the 0.3-mg/kg and 1.8-mg/kg doses, respectively. Plasma buprenorphine concentrations were > 1 ng/mL for mean durations of 24 and 48 hours after low- and high-dose administration, respectively. Mean elimination half-life was 6.23 hours for the low dose and 7.84 hours for the high dose. Mean agitation-sedation scores were higher (indicating some degree of sedation) than the baseline values for 24 hours at both doses. No clinically important adverse effects were observed. CONCLUSIONS AND CLINICAL RELEVANCE Concentrated buprenorphine was rapidly absorbed, and plasma drug concentrations considered to have analgesic effects in other raptor species were maintained for extended periods. Most birds had mild to moderate sedation. Additional studies are needed to evaluate the pharmacodynamics of these doses of concentrated buprenorphine in red-tailed hawks.

  18. Development of a hospital-based patient-reported outcome framework for lung cancer patients: a study protocol.

    PubMed

    Moloczij, Natasha; Gough, Karla; Solomon, Benjamin; Ball, David; Mileshkin, Linda; Duffy, Mary; Krishnasamy, Mei

    2018-01-11

    Patient-reported outcome (PRO) data is central to the delivery of quality health care. Establishing sustainable, reliable and cost-efficient methods for routine collection and integration of PRO data into health information systems is challenging. This protocol paper describes the design and structure of a study to develop and pilot test a PRO framework to systematically and longitudinally collect PRO data from a cohort of lung cancer patients at a comprehensive cancer centre in Australia. Best-practice guidelines for developing registries aimed at collecting PROs informed the development of this PRO framework. Framework components included: achieving consensus on determining the purpose of the framework, the PRO measures to be included, the data collection time points and collection methods (electronic and paper), establishing processes to safeguard the quality of the data collected and to link the PRO framework to an existing hospital-based lung cancer clinical registry. Lung cancer patients will be invited to give feedback on the PRO measures (PROMs) chosen and the data collection time points and methods. Implementation of the framework will be piloted for 12 months. Then a mixed-methods approach used to explore patient and multidisciplinary perspectives on the feasibility of implementing the framework and linking it to the lung cancer clinical registry, its clinical utility, perceptions of data collection burden, and preliminary assessment of resource costs to integrate, implement and sustain the PRO framework. The PRO data set will include: a quality of life questionnaire (EORTC-QLQ-C30) and the EORTC lung cancer specific module (QLQC-LC-13). These will be collected pre-treatment (baseline), 2, 6 and 12 months post-baseline. Also, four social isolation questions (PROMIS) will be collected at baseline. Identifying and deciding on the overall purpose, clinical utility of data and which PROs to collect from patients requires careful consideration. Our study will explore how PRO data collection processes that link to a clinical data set can be developed and integrated; how PRO systems that are easy for patients to complete and professionals to use in practice can be achieved, and will provide indicative costs of developing and integrating a longitudinal PRO framework into routine hospital data collection systems. This study is not a clinical trial and is therefore not registered in any trial registry. However, it has received human research ethics approval (LNR/16/PMCC/45).

  19. Concentrations of tylvalosin and 3-O-acetyltylosin attained in the synovial fluid of swine after administration by oral gavage at 50 and 5 mg/kg.

    PubMed

    Canning, P; Bates, J; Hammen, K; Coetzee, J; Wulf, L; Rajewski, S; Wang, C; Karriker, L

    2016-12-01

    The objectives of this study were to determine the concentration of tylvalosin (TVN) and its metabolite, 3-O-acetyltylosin (3AT) in the synovial fluid of growing pigs when administered as a single bolus by oral gavage at target doses of 50 mg/kg (Trial 1) and 5 mg/kg (Trial 2). TVN is a water soluble macrolide antimicrobial used in swine production. The stability of the drug in synovial fluid samples stored at -70 °C up to 28 days was also evaluated in Trial 2. In Trial 1, eight pigs were randomly assigned to one of eight time points for euthanasia and synovial fluid collection: 0, 1, 2, 3, 4, 6, 9, 12 h postgavage. For Trial 2, 24 pigs were randomly allocated to one terminal collection time point at 0, 2, 4, 6, 8 or 10 h postgavage. Synovial fluid was analyzed to determine TVN and 3AT concentrations. TVN and 3AT were detected in Trial 1 at all time points, except 0 h. At 2 h postgavage for trial 2, the mean concentrations peaked at 31.17 ng/mL (95% CI: 18.62-52.16) for TVN and at 58.82 ng/mL (95% CI: 35.14-98.46) for 3AT. Storage duration did not impact TVN or 3AT concentrations (P-value 0.9732). © 2016 John Wiley & Sons Ltd.

  20. Implementation of Wi-Fi Signal Sampling on an Android Smartphone for Indoor Positioning Systems.

    PubMed

    Liu, Hung-Huan; Liu, Chun

    2017-12-21

    Collecting and maintaining radio fingerprint for wireless indoor positioning systems involves considerable time and labor. We have proposed the quick radio fingerprint collection (QRFC) algorithm which employed the built-in accelerometer of Android smartphones to implement step detection in order to assist in collecting radio fingerprints. In the present study, we divided the algorithm into moving sampling (MS) and stepped MS (SMS), and describe the implementation of both algorithms and their comparison. Technical details and common errors concerning the use of Android smartphones to collect Wi-Fi radio beacons were surveyed and discussed. The results of signal sampling experiments performed in a hallway measuring 54 m in length showed that in terms of the amount of time required to complete collection of access point (AP) signals, static sampling (SS; a traditional procedure for collecting Wi-Fi signals) took at least 2 h, whereas MS and SMS took approximately 150 and 300 s, respectively. Notably, AP signals obtained through MS and SMS were comparable to those obtained through SS in terms of the distribution of received signal strength indicator (RSSI) and positioning accuracy. Therefore, MS and SMS are recommended instead of SS as signal sampling procedures for indoor positioning algorithms.

  1. Implementation of Wi-Fi Signal Sampling on an Android Smartphone for Indoor Positioning Systems

    PubMed Central

    Liu, Chun

    2017-01-01

    Collecting and maintaining radio fingerprint for wireless indoor positioning systems involves considerable time and labor. We have proposed the quick radio fingerprint collection (QRFC) algorithm which employed the built-in accelerometer of Android smartphones to implement step detection in order to assist in collecting radio fingerprints. In the present study, we divided the algorithm into moving sampling (MS) and stepped MS (SMS), and describe the implementation of both algorithms and their comparison. Technical details and common errors concerning the use of Android smartphones to collect Wi-Fi radio beacons were surveyed and discussed. The results of signal sampling experiments performed in a hallway measuring 54 m in length showed that in terms of the amount of time required to complete collection of access point (AP) signals, static sampling (SS; a traditional procedure for collecting Wi-Fi signals) took at least 2 h, whereas MS and SMS took approximately 150 and 300 s, respectively. Notably, AP signals obtained through MS and SMS were comparable to those obtained through SS in terms of the distribution of received signal strength indicator (RSSI) and positioning accuracy. Therefore, MS and SMS are recommended instead of SS as signal sampling procedures for indoor positioning algorithms. PMID:29267234

  2. The Performance Analysis of a Uav Based Mobile Mapping System Platform

    NASA Astrophysics Data System (ADS)

    Tsai, M. L.; Chiang, K. W.; Lo, C. F.; Ch, C. H.

    2013-08-01

    To facilitate applications such as environment detection or disaster monitoring, the development of rapid low cost systems for collecting near real-time spatial information is very critical. Rapid spatial information collection has become an emerging trend for remote sensing and mapping applications. This study develops a Direct Georeferencing (DG) based fixed-wing Unmanned Aerial Vehicle (UAV) photogrammetric platform where an Inertial Navigation System (INS)/Global Positioning System (GPS) integrated Positioning and Orientation System (POS) system is implemented to provide the DG capability of the platform. The performance verification indicates that the proposed platform can capture aerial images successfully. A flight test is performed to verify the positioning accuracy in DG mode without using Ground Control Points (GCP). The preliminary results illustrate that horizontal DG positioning accuracies in the x and y axes are around 5 m with 300 m flight height. The positioning accuracy in the z axis is less than 10 m. Such accuracy is good for near real-time disaster relief. The DG ready function of proposed platform guarantees mapping and positioning capability even in GCP free environments, which is very important for rapid urgent response for disaster relief. Generally speaking, the data processing time for the DG module, including POS solution generalization, interpolation, Exterior Orientation Parameters (EOP) generation, and feature point measurements, is less than one hour.

  3. Spatially offset raman spectroscopy for non-invasive assessment of fracture healing

    NASA Astrophysics Data System (ADS)

    Ding, Hao; Lu, Guijin; West, Christopher; Gogola, Gloria; Kellam, James; Ambrose, Catherine; Bi, Xiaohong

    2016-02-01

    Fracture non-unions and bone re-fracture are common challenges for post-fracture management. To achieve better prognosis and treatment evaluation, it is important to be able to assess the quality of callus over the time course of healing. This study evaluated the potential of spatially offset Raman spectroscopy for assessing the fracture healing process in situ. We investigated a rat model of fracture healing at two weeks and 4 weeks post fracture with a fractured femur and a contralateral control in each animal. Raman spectra were collected from the depilated thighs on both sides transcutaneously in situ with various source/detection offsets. Bone signals were recovered from SORS spectra, and then compared with those collected from bare bones. The relative intensity of mineral from fractured bone was markedly decreased compared to the control. The fractured bones demonstrated lower mineral and carbonate level and higher collagen content in the callus at the early time point. Compared to week 2, collagen mineralization and mineral carbonation increased at 4 weeks post fracture. Similarly, the material properties of callus determined by reference point indentation also increased in the 4-week group, indicating improved callus quality with time. The results from Raman analysis are in agreement with radiographic and material testing, indicating the potential of this technique in assessing fracture healing in vivo.

  4. The Effects of Preliteracy Knowledge, Schooling, and Summer Vacation on Literacy Acquisition

    ERIC Educational Resources Information Center

    Tiruchittampalam, Shanthi; Nicholson, Tom; Levin, Joel R.; Ferron, John M.

    2018-01-01

    What causes the literacy gap and can schools compensate for it? The authors investigated 3 drivers of the gap: preliteracy knowledge, schooling, and the summer vacation. Longitudinal literacy data over 5 time points were collected on 126 five-year-olds attending higher or lower socioeconomic status (SES) schools during their first 15 months of…

  5. Limited Cash Flow on Slot Machines: Effects of Prohibition of Note Acceptors on Adolescent Gambling Behaviour

    ERIC Educational Resources Information Center

    Hansen, Marianne; Rossow, Ingeborg

    2010-01-01

    This study addresses the impact of prohibition of note acceptors on gambling behaviour and gambling problems among Norwegian adolescents. Data comprised school surveys at three time points; 2004 and 2005 (before intervention) and 2006 (after intervention). Net samples comprised 20.000 students aged 13-19 years at each data collection. Identical…

  6. The Impact of a Multi-Component Physical Activity Programme in Low-Income Elementary Schools

    ERIC Educational Resources Information Center

    Massey, William V.; Stellino, Megan B.; Holliday, Megan; Godbersen, Travis; Rodia, Rachel; Kucher, Greta; Wilkison, Megan

    2017-01-01

    Objective: To identify the effects of a structured and multifaceted physical activity and recess intervention on student and adult behaviour in school. Design: Mixed-methods and community-based participatory approach. Setting: Large, urban, low-income school district in the USA. Methods: Data were collected at three time points over a 1-year…

  7. Responsibility Development Transfers across Contexts: Reciprocal Pathways between Home and Afterschool Programs

    ERIC Educational Resources Information Center

    Raffaelli, Marcela; Simpkins, Sandra D.; Tran, Steve P.; Larson, Reed W.

    2018-01-01

    We investigated adolescent responsibility across 2 developmental contexts, home and an afterschool program. Longitudinal data were collected from 355 ethnically diverse 11-20-year-old adolescents (M = 15.49; 55.9% female) in 14 project-based programs. Youth rated their responsibility in the program and at home at 4 time points; parents and leaders…

  8. Natural Mentoring Relationships among Adolescent Mothers: A Study of Resilience

    ERIC Educational Resources Information Center

    Hurd, Noelle M.; Zimmerman, Marc A.

    2010-01-01

    This study focused on natural mentoring relationships between nonparental adults and African American adolescent mothers. Data were collected from 93 adolescent mothers over 5 time points, starting in the adolescent mothers' senior year of high school and ending 5 years after high school. We found that having a natural mentor was related to fewer…

  9. The development and implementation of a method using blue mussels (Mytilus spp.) as biosentinels of Cryptosporidium spp. and Toxoplasma gondii contamination in marine aquatic environments

    EPA Science Inventory

    It is estimated that protozoan parasites still account for greater than one third of waterborne disease outbreaks reported. Methods used to monitor microbial contamination typically involve collecting discrete samples at specific time-points and analyzing for a single contaminan...

  10. 40 CFR 141.40 - Monitoring requirements for unregulated contaminants.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-12/31/2015 Column headings are: 1—Contaminant: The name of the contaminant to be analyzed. 2—CAS..., for List 2 Screening Survey, or List 3 Pre-Screen Testing, during the time frame indicated in column 6... paragraph (a)(3) of this section. Samples must be collected at each sample point that is specified in column...

  11. 40 CFR 141.40 - Monitoring requirements for unregulated contaminants.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-12/31/2015 Column headings are: 1—Contaminant: The name of the contaminant to be analyzed. 2—CAS..., for List 2 Screening Survey, or List 3 Pre-Screen Testing, during the time frame indicated in column 6... paragraph (a)(3) of this section. Samples must be collected at each sample point that is specified in column...

  12. 40 CFR 141.40 - Monitoring requirements for unregulated contaminants.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-12/31/2015 Column headings are: 1—Contaminant: The name of the contaminant to be analyzed. 2—CAS..., for List 2 Screening Survey, or List 3 Pre-Screen Testing, during the time frame indicated in column 6... paragraph (a)(3) of this section. Samples must be collected at each sample point that is specified in column...

  13. Classroom Goal Structures and HIV and Pregnancy Prevention Education in Rural High School Health Classrooms

    ERIC Educational Resources Information Center

    Anderman, Eric M.; Cupp, Pamela K.; Lane, Derek R.; Zimmerman, Rick; Gray, DeLeon L.; O'Connell, Ann

    2011-01-01

    Over 5,000 adolescents enrolled in required rural high school health courses reported their perceptions of mastery and extrinsic goal structures in their health classrooms. Data were collected from all students at three time points (prior to HIV and pregnancy instruction, 3 months after instruction, and 1 year after instruction). Results indicated…

  14. Changes in Stress and Psychological Adjustment during the Transition to High School among Freshmen in an Accelerated Curriculum

    ERIC Educational Resources Information Center

    Suldo, Shannon M.; Shaunessy-Dedrick, Elizabeth

    2013-01-01

    This study determined whether participation in an accelerated curriculum (specifically, the International Baccalaureate [IB] program) upon entry to high school is associated with increases in stress and/or associated with psychological problems. Data from self-report questionnaires were collected at two time points (summer after eighth grade, fall…

  15. Cassini Attitude Control Operations - Guidelines Levied on Science to Extend Reaction Wheel Life

    NASA Technical Reports Server (NTRS)

    Mittelsteadt, Carson O.

    2011-01-01

    The Cassini spacecraft was launched on October 15, 1997 and arrived at Saturn on June 30, 2004. It has performed detailed observations and remote sensing of Saturn, its rings, and its satellites since that time. Cassini deployed the European-built Huygens probe, which descended through the Titan atmosphere (Saturn's largest moon) and landed on its surface on January 14, 2005. The Cassini mission has recently been approved by NASA to continue through September of 2017. This 7-year extension is called the Solstice mission and it presents challenges to the spacecraft operations team and its ability to maintain the health of the spacecraft. To keep the spacecraft healthy for 7 more years, the spacecraft team must carefully manage hydrazine use (about 48% of the 132 kg launch load remains as of January 2011). A vital part of conserving hydrazine is to use the reaction wheel assembly (RWA) control system for precise pointing and slews wherever possible. In any given week, the Cassini spacecraft is commanded to use RWA control about 99% of the time, with about 1% of the time requiring reaction control system (RCS) thruster control (to perform Delta V course corrections or to bias the RWA momentum). Such extensive use of the RWA hardware throughout the mission requires that the RWAs be operated in a way that minimizes degradation in the RWA electronics, DC motor, and spin bearing for each reaction wheel. Three consumables in particular have been identified for the RWAs: (1) Total number of revolutions for each RWA. (2) Time spent at very low wheel speeds. At these low speeds, good elasto-hydrodynamic (EHD) film lubrication may be compromised. (3) Total number of on/off power cycles. The second of these consumables, minimizing the time spent at very low wheel speeds, is especially important to keep the spin bearing healthy and well-lubricated. These consumables are actively managed by the attitude control operations team throughout the mission. One vital management technique is to predict individual RWA momentum (given the pointing and slews that are needed to collect the best science) and to bias the RWA momentum in a way that reduces both the total number of revolutions as well as the time spent below EHD wheel speed. Another strategy to protect RWA health is to alter the planned pointing of the spacecraft (which can affect science collection) so that the RWA consumables are conserved. This paper focuses on why this second technique is needed, and discusses how guidelines have been developed by the attitude control team which affects the planned science pointing, so that science data can be most optimally collected while still minimizing RWA consumable usage.

  16. Effects of major depression on moment-in-time work performance.

    PubMed

    Wang, Philip S; Beck, Arne L; Berglund, Pat; McKenas, David K; Pronk, Nicolaas P; Simon, Gregory E; Kessler, Ronald C

    2004-10-01

    Although major depression is thought to have substantial negative effects on work performance, the possibility of recall bias limits self-report studies of these effects. The authors used the experience sampling method to address this problem by collecting comparative data on moment-in-time work performance among service workers who were depressed and those who were not depressed. The group studied included 105 airline reservation agents and 181 telephone customer service representatives selected from a larger baseline sample; depressed workers were deliberately oversampled. Respondents were given pagers and experience sampling method diaries for each day of the study. A computerized autodialer paged respondents at random time points. When paged, respondents reported on their work performance in the diary. Moment-in-time work performance was assessed at five random times each day over a 7-day data collection period (35 data points for each respondent). Seven conditions (allergies, arthritis, back pain, headaches, high blood pressure, asthma, and major depression) occurred often enough in this group of respondents to be studied. Major depression was the only condition significantly related to decrements in both of the dimensions of work performance assessed in the diaries: task focus and productivity. These effects were equivalent to approximately 2.3 days absent because of sickness per depressed worker per month of being depressed. Previous studies based on days missed from work significantly underestimate the adverse economic effects associated with depression. Productivity losses related to depression appear to exceed the costs of effective treatment.

  17. The Feasibility of Collecting School Nurse Data.

    PubMed

    Bergren, Martha Dewey

    2016-10-01

    School nurses cite barriers to collecting comprehensive data on the care they provide. This study evaluated the feasibility of collecting school nurse data on selected child health and education outcomes. Outcome variables included school health office visits; health provider, parent, and staff communication; early dismissal; and medications administered. On an average day, the school nurses cared for 43.5 students, administered 14 medications, and averaged of 17 daily communications. Day 1 data collection times averaged 15 min or less. By Day 5, 6.6 min was needed to complete the survey. Data collection was feasible for 76% of those who elected to participate. Feasibility is enhanced by limiting the number of data points and the number of days for data collection using a data collection web interface. Data collection across large numbers of nurses and a wide range of school nurse delivery models is necessary to measure the impact of school nurse presence and interventions on child health and education outcomes. © The Author(s) 2016.

  18. Comparing Change in Anterior Curvature after Corneal Cross-Linking Using Scanning-Slit and Scheimpflug Technology.

    PubMed

    Lang, Paul Z; Thulasi, Praneetha; Khandelwal, Sumitra S; Hafezi, Farhad; Randleman, J Bradley

    2018-05-02

    To evaluate the correlation between anterior axial curvature difference maps following corneal cross-linking (CXL) for progressive keratoconus obtained from Scheimpflug-based tomography and Placido-based topography. Between-devices reliability analysis of randomized clinical trial data METHODS: Corneal imaging was collected at a single center institution pre-operatively and at 3, 6, and 12 months post-operatively using Scheimpflug-based tomography (Pentacam, Oculus Inc., Lynnwood, WA) and Scanning-slit, Placido-based topography (Orbscan II, Bausch & Lomb, Rochester, NY) in patients with progressive keratoconus receiving standard protocol CXL (3mW/cm 2 for 30 minutes). Regularization index (RI), absolute maximum keratometry (K Max), and change in (ΔK Max) were compared between the two devices at each time point. 51 eyes from 36 patients were evaluated at all time points. values were significantly different at all time points [56.01±5.3D Scheimpflug vs. 55.04±5.1D scanning-slit pre-operatively (p=0.003); 54.58±5.3D Scheimpflug vs. 53.12±4.9D scanning-slit at 12 months (p<0.0001)] but strongly correlated between devices (r=0.90-0.93) at all time points. The devices were not significantly different at any time point for either ΔK Max or RI but were poorly correlated at all time points (r=0.41-0.53 for ΔK Max, r=0.29-0.48 for RI). At 12 months, 95% LOA was 7.51D for absolute, 8.61D for ΔK Max, and 19.86D for RI. Measurements using Scheimpflug and scanning-slit Placido-based technology are correlated but not interchangeable. Both devices appear reasonable for separately monitoring the cornea's response to CXL; however, caution should be used when comparing results obtained with one measuring technology to the other. Copyright © 2018 Elsevier Inc. All rights reserved.

  19. The Chains on All My People Are the Chains on Me: Restrictions to Collective Autonomy Undermine the Personal Autonomy and Psychological Well-Being of Group Members.

    PubMed

    Kachanoff, Frank J; Taylor, Donald M; Caouette, Julie; Khullar, Thomas H; Wohl, Michael J A

    2018-01-11

    Four studies assessed the potentially detrimental effects that restrictions to collective autonomy (i.e., a group's freedom to determine and practice its own identity) may have for the personal autonomy and psychological well-being of group members. In Study 1, using 3 distinct samples (NSample1a = 123, NSample1b = 129, NSample1c = 370), correlational and cross-cultural evidence indicates that perceived restrictions to the collective autonomy of one's group is directly associated with reduced personal autonomy, and indirectly associated with diminished well-being through personal autonomy. In Study 2 (N = 411), a longitudinal assessment of group members over 3 time-points during a 4-month period found that group members who perceived greater collective autonomy restriction also experienced reduced personal autonomy, and in turn, reduced psychological well-being over time. In Study 3 (N = 255), group members described a time during which their ingroup had (or did not have) its collective autonomy unduly restricted by other groups. Participants who were primed to think that their group lacked collective autonomy reported reduced feelings of personal autonomy, and reduced psychological well-being (compared with those primed to think their group had collective autonomy). In Study 4 (N = 389), collective autonomy was manipulated within the context of an intensive laboratory simulation. Collective autonomy-restricted group members experienced less personal autonomy than those who did not have their collective autonomy restricted. Together these findings suggest that restrictions to a group's collective autonomy may have detrimental consequences for the personal autonomy and psychological well-being of group members. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  20. Winter 2016, Part B—Coastal oblique aerial photographs collected from Assateague Island, Virginia, to Montauk Point, New York, March 8–9, 2016

    USGS Publications Warehouse

    Morgan, Karen L. M.

    2017-02-28

    The U.S. Geological Survey (USGS), as part of the National Assessment of Coastal Change Hazards project, conducts baseline and storm-response photography missions to document and understand the changes in the vulnerability of the Nation's coasts to extreme storms. On March 8–9, 2016, the USGS conducted an oblique aerial photographic survey from Assateague Island, Virginia, to Montauk Point, New York, aboard a Cessna 182 aircraft at an altitude of 500 feet and approximately 1,200 feet offshore. This mission was conducted to collect baseline data for assessing incremental changes in the beach and nearshore area and can be used to assess future coastal change.The photographs in this report document the state of the barrier islands and other coastal features at the time of the survey.

  1. Collective phase description of oscillatory convection

    NASA Astrophysics Data System (ADS)

    Kawamura, Yoji; Nakao, Hiroya

    2013-12-01

    We formulate a theory for the collective phase description of oscillatory convection in Hele-Shaw cells. It enables us to describe the dynamics of the oscillatory convection by a single degree of freedom which we call the collective phase. The theory can be considered as a phase reduction method for limit-cycle solutions in infinite-dimensional dynamical systems, namely, stable time-periodic solutions to partial differential equations, representing the oscillatory convection. We derive the phase sensitivity function, which quantifies the phase response of the oscillatory convection to weak perturbations applied at each spatial point, and analyze the phase synchronization between two weakly coupled Hele-Shaw cells exhibiting oscillatory convection on the basis of the derived phase equations.

  2. Perception-based road hazard identification with Internet support.

    PubMed

    Tarko, Andrew P; DeSalle, Brian R

    2003-01-01

    One of the most important tasks faced by highway agencies is identifying road hazards. Agencies use crash statistics to detect road intersections and segments where the frequency of crashes is excessive. With the crash-based method, a dangerous intersection or segment can be pointed out only after a sufficient number of crashes occur. A more proactive method is needed, and motorist complaints may be able to assist agencies in detecting road hazards before crashes occur. This paper investigates the quality of safety information reported by motorists and the effectiveness of hazard identification based on motorist reports, which were collected with an experimental Internet website. It demonstrates that the intersections pointed out by motorists tended to have more crashes than other intersections. The safety information collected through the website was comparable to 2-3 months of crash data. It was concluded that although the Internet-based method could not substitute for the traditional crash-based methods, its joint use with crash statistics might be useful in detecting new hazards where crash data had been collected for a short time.

  3. Digital Correction of Motion Artifacts in Microscopy Image Sequences Collected from Living Animals Using Rigid and Non-Rigid Registration

    PubMed Central

    Lorenz, Kevin S.; Salama, Paul; Dunn, Kenneth W.; Delp, Edward J.

    2013-01-01

    Digital image analysis is a fundamental component of quantitative microscopy. However, intravital microscopy presents many challenges for digital image analysis. In general, microscopy volumes are inherently anisotropic, suffer from decreasing contrast with tissue depth, lack object edge detail, and characteristically have low signal levels. Intravital microscopy introduces the additional problem of motion artifacts, resulting from respiratory motion and heartbeat from specimens imaged in vivo. This paper describes an image registration technique for use with sequences of intravital microscopy images collected in time-series or in 3D volumes. Our registration method involves both rigid and non-rigid components. The rigid registration component corrects global image translations, while the non-rigid component manipulates a uniform grid of control points defined by B-splines. Each control point is optimized by minimizing a cost function consisting of two parts: a term to define image similarity, and a term to ensure deformation grid smoothness. Experimental results indicate that this approach is promising based on the analysis of several image volumes collected from the kidney, lung, and salivary gland of living rodents. PMID:22092443

  4. How has the presidential election affected young Americans?

    PubMed

    DeJonckheere, Melissa; Fisher, Andre; Chang, Tammy

    2018-01-01

    The 2016 presidential election season and subsequent political events have had physical and emotional impacts on youth. We collected qualitative insights from 14 to 24 year olds across the US related to these events over time. Open-ended probes were sent via text message at three time points before and after the 2016 presidential election. The majority of youth reported emotional stress during all three time points, and female participants were significantly more likely to experience emotional responses. White participants were more likely to report negative symptoms than their peers both pre-election and at 4-months post-election. While preliminary, the results indicate that feelings of stress, anxiety, and fear have persisted in the months following the election, particularly for young women. Additional research is needed to examine the long-term effects of political events on the emotional and physical health of youth.

  5. Point-of-care oral-based diagnostics

    PubMed Central

    Hart, RW; Mauk, MG; Liu, C; Qiu, X; Thompson, JA; Chen, D; Malamud, D; Abrams, WR; Bau, HH

    2014-01-01

    Many of the target molecules that reside in blood are also present in oral fluids, albeit at lower concentrations. Oral fluids are, however, relatively easy and safe to collect without the need for specialized equipment and training. Thus, oral fluids provide convenient samples for medical diagnostics. Recent advances in lab-on-a-chip technologies have made minute, fully integrated diagnostic systems practical for an assortment of point-of-care tests. Such systems can perform either immunoassays or molecular diagnostics outside centralized laboratories within time periods ranging from minutes to an hour. The article briefly reviews recent advances in devices for point-of-care testing with a focus on work that has been carried out by the authors as part of a NIH program. PMID:21521419

  6. Monitoring Fine-Grained Sediment in the Colorado River Ecosystem, Arizona - Control Network and Conventional Survey Techniques

    USGS Publications Warehouse

    Hazel, Joseph E.; Kaplinski, Matt; Parnell, Roderic A.; Kohl, Keith; Schmidt, John C.

    2008-01-01

    In 2002, fine-grained sediment (sand, silt, and clay) monitoring in the Colorado River downstream from Glen Canyon Dam was initiated to survey channel topography at scales previously unobtainable in this canyon setting. This report presents the methods used to establish the high-resolution global positioning system (GPS) control network required for this effort as well as the conventional surveying techniques used in the study. Using simultaneous, dual-frequency GPS vector-based methods, the network points were determined to have positioning accuracies of less than 0.03 meters (m) and ellipsoidal height accuracies of between 0.01 and 0.10 m at a 95-percent degree of confidence. We also assessed network point quality with repeated, electronic (optical) total-station observations at 39 points for a total of 362 measurements; the mean range was 0.022 m in horizontal and 0.13 in vertical at a 95-percent confidence interval. These results indicate that the control network is of sufficient spatial and vertical accuracy for collection of airborne and subaerial remote-sensing technologies and integration of these data in a geographic information system on a repeatable basis without anomalies. The monitoring methods were employed in up to 11 discrete reaches over various time intervals. The reaches varied from 1.3 to 6.4 kilometers in length. Field results from surveys in 2000, 2002, and 2004 are described, during which conventional surveying was used to collect more than 3000 points per day. Ground points were used as checkpoints and to supplement areas just below or above the water surface, where remote-sensing data are not collected or are subject to greater error. An accuracy of +or- 0.05 m was identified as the minimum precision of individual ground points. These results are important for assessing digital elevation model (DEM) quality and identifying detection limits of significant change among surfaces generated from remote-sensing technologies.

  7. Cluster-Based Multipolling Sequencing Algorithm for Collecting RFID Data in Wireless LANs

    NASA Astrophysics Data System (ADS)

    Choi, Woo-Yong; Chatterjee, Mainak

    2015-03-01

    With the growing use of RFID (Radio Frequency Identification), it is becoming important to devise ways to read RFID tags in real time. Access points (APs) of IEEE 802.11-based wireless Local Area Networks (LANs) are being integrated with RFID networks that can efficiently collect real-time RFID data. Several schemes, such as multipolling methods based on the dynamic search algorithm and random sequencing, have been proposed. However, as the number of RFID readers associated with an AP increases, it becomes difficult for the dynamic search algorithm to derive the multipolling sequence in real time. Though multipolling methods can eliminate the polling overhead, we still need to enhance the performance of the multipolling methods based on random sequencing. To that extent, we propose a real-time cluster-based multipolling sequencing algorithm that drastically eliminates more than 90% of the polling overhead, particularly so when the dynamic search algorithm fails to derive the multipolling sequence in real time.

  8. Sampling and detection of airborne influenza virus towards point-of-care applications.

    PubMed

    Ladhani, Laila; Pardon, Gaspard; Meeuws, Hanne; van Wesenbeeck, Liesbeth; Schmidt, Kristiane; Stuyver, Lieven; van der Wijngaart, Wouter

    2017-01-01

    Airborne transmission of the influenza virus contributes significantly to the spread of this infectious pathogen, particularly over large distances when carried by aerosol droplets with long survival times. Efficient sampling of virus-loaded aerosol in combination with a low limit of detection of the collected virus could enable rapid and early detection of airborne influenza virus at the point-of-care setting. Here, we demonstrate a successful sampling and detection of airborne influenza virus using a system specifically developed for such applications. Our system consists of a custom-made electrostatic precipitation (ESP)-based bioaerosol sampler that is coupled with downstream quantitative polymerase chain reaction (qPCR) analysis. Aerosolized viruses are sampled directly into a miniaturized collector with liquid volume of 150 μL, which constitutes a simple and direct interface with subsequent biological assays. This approach reduces sample dilution by at least one order of magnitude when compared to other liquid-based aerosol bio-samplers. Performance of our ESP-based sampler was evaluated using influenza virus-loaded sub-micron aerosols generated from both cultured and clinical samples. Despite the miniaturized collection volume, we demonstrate a collection efficiency of at least 10% and sensitive detection of a minimum of 3721 RNA copies. Furthermore, we show that an improved extraction protocol can allow viral recovery of down to 303 RNA copies and a maximum sampler collection efficiency of 47%. A device with such a performance would reduce sampling times dramatically, from a few hours with current sampling methods down to a couple of minutes with our ESP-based bioaerosol sampler.

  9. A cross-sectional study of the individual, social, and built environmental correlates of pedometer-based physical activity among elementary school children.

    PubMed

    McCormack, Gavin R; Giles-Corti, Billie; Timperio, Anna; Wood, Georgina; Villanueva, Karen

    2011-04-12

    Children who participate in regular physical activity obtain health benefits. Preliminary pedometer-based cut-points representing sufficient levels of physical activity among youth have been established; however limited evidence regarding correlates of achieving these cut-points exists. The purpose of this study was to identify correlates of pedometer-based cut-points among elementary school-aged children. A cross-section of children in grades 5-7 (10-12 years of age) were randomly selected from the most (n = 13) and least (n = 12) 'walkable' public elementary schools (Perth, Western Australia), stratified by socioeconomic status. Children (n = 1480; response rate = 56.6%) and parents (n = 1332; response rate = 88.8%) completed a survey, and steps were collected from children using pedometers. Pedometer data were categorized to reflect the sex-specific pedometer-based cut-points of ≥15000 steps/day for boys and ≥12000 steps/day for girls. Associations between socio-demographic characteristics, sedentary and active leisure-time behavior, independent mobility, active transportation and built environmental variables - collected from the child and parent surveys - and meeting pedometer-based cut-points were estimated (odds ratios: OR) using generalized estimating equations. Overall 927 children participated in all components of the study and provided complete data. On average, children took 11407 ± 3136 steps/day (boys: 12270 ± 3350 vs. girls: 10681 ± 2745 steps/day; p < 0.001) and 25.9% (boys: 19.1 vs. girls: 31.6%; p < 0.001) achieved the pedometer-based cut-points.After adjusting for all other variables and school clustering, meeting the pedometer-based cut-points was negatively associated (p < 0.05) with being male (OR = 0.42), parent self-reported number of different destinations in the neighborhood (OR 0.93), and a friend's (OR 0.62) or relative's (OR 0.44, boys only) house being at least a 10-minute walk from home. Achieving the pedometer-based cut-points was positively associated with participating in screen-time < 2 hours/day (OR 1.88), not being driven to school (OR 1.48), attending a school located in a high SES neighborhood (OR 1.33), the average number of steps among children within the respondent's grade (for each 500 step/day increase: OR 1.29), and living further than a 10-minute walk from a relative's house (OR 1.69, girls only). Comprehensive multi-level interventions that reduce screen-time, encourage active travel to/from school and foster a physically active classroom culture might encourage more physical activity among children.

  10. A cross-sectional study of the individual, social, and built environmental correlates of pedometer-based physical activity among elementary school children

    PubMed Central

    2011-01-01

    Background Children who participate in regular physical activity obtain health benefits. Preliminary pedometer-based cut-points representing sufficient levels of physical activity among youth have been established; however limited evidence regarding correlates of achieving these cut-points exists. The purpose of this study was to identify correlates of pedometer-based cut-points among elementary school-aged children. Method A cross-section of children in grades 5-7 (10-12 years of age) were randomly selected from the most (n = 13) and least (n = 12) 'walkable' public elementary schools (Perth, Western Australia), stratified by socioeconomic status. Children (n = 1480; response rate = 56.6%) and parents (n = 1332; response rate = 88.8%) completed a survey, and steps were collected from children using pedometers. Pedometer data were categorized to reflect the sex-specific pedometer-based cut-points of ≥15000 steps/day for boys and ≥12000 steps/day for girls. Associations between socio-demographic characteristics, sedentary and active leisure-time behavior, independent mobility, active transportation and built environmental variables - collected from the child and parent surveys - and meeting pedometer-based cut-points were estimated (odds ratios: OR) using generalized estimating equations. Results Overall 927 children participated in all components of the study and provided complete data. On average, children took 11407 ± 3136 steps/day (boys: 12270 ± 3350 vs. girls: 10681 ± 2745 steps/day; p < 0.001) and 25.9% (boys: 19.1 vs. girls: 31.6%; p < 0.001) achieved the pedometer-based cut-points. After adjusting for all other variables and school clustering, meeting the pedometer-based cut-points was negatively associated (p < 0.05) with being male (OR = 0.42), parent self-reported number of different destinations in the neighborhood (OR 0.93), and a friend's (OR 0.62) or relative's (OR 0.44, boys only) house being at least a 10-minute walk from home. Achieving the pedometer-based cut-points was positively associated with participating in screen-time < 2 hours/day (OR 1.88), not being driven to school (OR 1.48), attending a school located in a high SES neighborhood (OR 1.33), the average number of steps among children within the respondent's grade (for each 500 step/day increase: OR 1.29), and living further than a 10-minute walk from a relative's house (OR 1.69, girls only). Conclusions Comprehensive multi-level interventions that reduce screen-time, encourage active travel to/from school and foster a physically active classroom culture might encourage more physical activity among children. PMID:21486475

  11. Mapping and Measuring the Microrelief of Slope Deformations Using Modern Contactless Technologies and Practical Application in Territorial Planning

    NASA Astrophysics Data System (ADS)

    Chudý, František; Slámová, Martina; Tomaštík, Julián; Kardoš, Miroslav; Tunák, Daniel; Saloň, Šimon

    2017-04-01

    Slope deformations are risks limiting economic land use potential. A national database system keeps records of slope disturbances and deformations, however, it is important to update the information mainly from the point of view of practical territorial planning, especially in the high-risk areas presented in the study. The paper explains the possibilities of applying modern methods of mapping the microrelief of slope deformations of a lower extent (up to several hundreds of m2) and using not very well known contactless technologies, which could be applied in practice due to their low-cost and low-time consuming nature. In order to create a digital model of the microrelief used to carry out the measurements we applied the method of terrestrial photogrammetry, terrestrial scanning using Lenovo Phab 2Pro. It is the first device available for users that uses the Google Tango technology. So far there have been only prototypes of devices available for the developers only. The Tango technology consists of 3 partial technologies - "depth perception" (measuring the distance to objects, nowadays it uses mainly infrared radiation), "motion tracking" (tracking the position and motion of the device using embedded sensors) and "area learning" (simply learning the area, where the device looks for same objects within already existing 3D models and real space). Even though the technology utilisation is nowadays presented mainly in the field of augmented reality and navigation in the interior, there are already some applications for collecting the point clouds in real time, which can be used in a wide spectrum of applications in exterior, which was also applied in our research. Data acquired this way can be processed in readily available software products, what enabled a high degree of automation also in our case. After comparing with the reference point field that was measured using GNSS and electronic tachymeter, we reached accuracy of point position determination from a digital microrelief model from terrestrial photogrammetry of mxy = 1.2 cm and at height of mv = 1.5 cm. The accuracy of models acquired using the Lenovo Pab 2Pro (scanning) is being evaluated. The created digital models of microrelief were compared with each other (photogrammetry, scanning), as well as with the reference measurement using the geodetic (tachymetric) measurement. The advantage of the presented economically available terrestrial data collection is the possibility of its utilisation under the stand canopy, which is very often difficult, sometimes even impossible, when using aerial data collection. Moreover, it is not possible to achieve the required density of points per m2 if the financial costs are to be bearable; therefore digital models created this way are not as accurate and detailed as the models created by the terrestrial data collection used in this research. The exact measurement procedures can be applied also in greater time span (creation of time series), what enables the researchers to monitor the changes in microrelief that can identify the imminent danger of sudden or large slope deformation, as was published in previous studies.

  12. Assessing the quality of crowdsourced in-situ land-use and land cover data from the FotoQuest Austria application

    NASA Astrophysics Data System (ADS)

    Laso Bayas, Juan Carlos; See, Linda; Fritz, Steffen; Sturn, Tobias; Karner, Mathias; Perger, Christoph; Duerauer, Martina; Mondel, Thomas; Domian, Dahlia; Moorthy, Inian; McCallum, Ian; Schepaschenko, Dmitry; Kraxner, Florian; Obersteiner, Michael

    2016-04-01

    With the proliferation of mobile phones and the rise of citizen science, the question of whether citizens can be used to complement traditional land surveys, e.g. the Land Use / Cover Area frame statistical Survey (LUCAS), needs further consideration. LUCAS is the European reference dataset for land use and land cover statistics. It is produced every three years using paid surveyors to collect information on land cover and land use at more than 270,000 point locations across all EU states. LUCAS has very strict protocols on data collection and a two-step system to ensure the quality of the data collected. To complement LUCAS, IIASA has developed the FotoQuest Austria (http://fotoquest.at/) app, which aims to engage citizens in exploring Austrian landscapes, geo-tagging land use and land cover across the country using a simplified version of the LUCAS protocol. The app shows the location of nearby points, and once at the location, volunteers take pictures in four cardinal directions and at the point location, recording the type of land use and land cover from a list of options in the app. Implementation of the simplified protocol uses the mobile technology to record the location, the angles of inclination of the phone when taking the pictures, the compass directions and the precision of the GPS to restrict when users can take photographs. These measures were employed to ensure high quality data collection. FotoQuest Austria has been running since the summer of 2015 with more than 2500 points on the ground and more than 12500 pictures collected by volunteers. Advantages of such an approach include the collection of a denser sample and a more frequent revisit time than the 3 year update cycle of LUCAS, which may then be used to detect ongoing change. Additionally, the involvement of citizens in getting to know their surrounding landscapes is a very valuable process and can be a positive vehicle for raising awareness of possible environmental conflicts and issues. This paper compares the results from this ongoing campaign with data from LUCAS. The presentation also outlines the lessons learned and highlights the minimum requirements needed to collect high quality data from volunteers. Recommendations for use of the app to complement LUCAS surveying and its application to other domains will also be discussed.

  13. Early Steps in Automated Behavior Mapping via Indoor Sensors.

    PubMed

    Arsan, Taner; Kepez, Orcun

    2017-12-16

    Behavior mapping (BM) is a spatial data collection technique in which the locational and behavioral information of a user is noted on a plan layout of the studied environment. Among many indoor positioning technologies, we chose Wi-Fi, BLE beacon and ultra-wide band (UWB) sensor technologies for their popularity and investigated their applicability in BM. We tested three technologies for error ranges and found an average error of 1.39 m for Wi-Fi in a 36 m² test area (6 m × 6 m), 0.86 m for the BLE beacon in a 37.44 m² test area (9.6 m × 3.9 m) and 0.24 m for ultra-wide band sensors in a 36 m² test area (6 m × 6 m). We simulated the applicability of these error ranges for real-time locations by using a behavioral dataset collected from an active learning classroom. We used two UWB tags simultaneously by incorporating a custom-designed ceiling system in a new 39.76 m² test area (7.35 m × 5.41 m). We considered 26 observation points and collected data for 180 s for each point (total 4680) with an average error of 0.2072 m for 23 points inside the test area. Finally, we demonstrated the use of ultra-wide band sensor technology for BM.

  14. Early Steps in Automated Behavior Mapping via Indoor Sensors

    PubMed Central

    Arsan, Taner

    2017-01-01

    Behavior mapping (BM) is a spatial data collection technique in which the locational and behavioral information of a user is noted on a plan layout of the studied environment. Among many indoor positioning technologies, we chose Wi-Fi, BLE beacon and ultra-wide band (UWB) sensor technologies for their popularity and investigated their applicability in BM. We tested three technologies for error ranges and found an average error of 1.39 m for Wi-Fi in a 36 m2 test area (6 m × 6 m), 0.86 m for the BLE beacon in a 37.44 m2 test area (9.6 m × 3.9 m) and 0.24 m for ultra-wide band sensors in a 36 m2 test area (6 m × 6 m). We simulated the applicability of these error ranges for real-time locations by using a behavioral dataset collected from an active learning classroom. We used two UWB tags simultaneously by incorporating a custom-designed ceiling system in a new 39.76 m2 test area (7.35 m × 5.41 m). We considered 26 observation points and collected data for 180 s for each point (total 4680) with an average error of 0.2072 m for 23 points inside the test area. Finally, we demonstrated the use of ultra-wide band sensor technology for BM. PMID:29258178

  15. What do primary care practitioners want to know? A content analysis of questions asked at the point of care.

    PubMed

    Bjerre, Lise M; Paterson, Nicholas R; McGowan, Jessie; Hogg, William; Campbell, Craig M; Viner, Gary; Archibald, Douglas

    2013-01-01

    Assessing physician needs to develop continuing medical education (CME) activities is an integral part of CME curriculum development. The purpose of the present study was to demonstrate the feasibility of identifying areas of perceived greatest needs for continuing medical education (CME) by using questions collected electronically at the point of care. This study is a secondary analysis of the "Just-in-Time" (JIT) information librarian consultation service database of questions using quantitative content analysis methods. The original JIT project demonstrated the feasibility of a real-time librarian service for answering questions asked by primary care clinicians at the point of care using a Web-based platform or handheld device. Data were collected from 88 primary care practitioners in Ontario, Canada, from October 2005 to April 2006. Questions were answered in less than 15 minutes, enabling clinicians to use the answer during patient encounters. Description of type and frequency of questions asked, including the organ system on which the questions focused, was produced using 2 classification systems, the "taxonomy of generic clinical questions" (TGCQ), and the International Classification for Primary Care version 2 (ICPC-2). Of the original 1889 questions, 1871 (99.0%) were suitable for analysis. A total of 970 (52%) of questions related to therapy; of these, 671 (69.2%) addressed questions about drug therapy, representing 36% of all questions. Questions related to diagnosis (24.8%) and epidemiology (13.5%) were also common. Organ systems questions concerning musculoskeletal, endocrine, skin, cardiac, and digestive systems were asked more than other categories. Questions collected at the point of care provide a valuable and unique source of information on the true learning needs of practicing clinicians. The TGCQ classification allowed us to show that a majority of questions had to do with treatment, particularly drug treatment, whereas the use of the ICPC-2 classification illustrated the great variety of questions asked about the diverse conditions encountered in primary care. It is feasible to use electronically collected questions asked by primary care clinicians in clinical practice to categorize self-identified knowledge and practice needs. This could be used to inform the development of future learning activities. Copyright © 2013 The Alliance for Continuing Education in the Health Professions, the Society for Academic Continuing Medical Education, and the Council on CME, Association for Hospital Medical Education.

  16. Strategies to assess systemic exposure of chemicals in subchronic/chronic diet and drinking water studies.

    PubMed

    Saghir, Shakil A; Mendrala, Alan L; Bartels, Michael J; Day, Sue J; Hansen, Steve C; Sushynski, Jacob M; Bus, James S

    2006-03-15

    Strategies were developed for the estimation of systemically available daily doses of chemicals, diurnal variations in blood levels, and rough elimination rates in subchronic feeding/drinking water studies, utilizing a minimal number of blood samples. Systemic bioavailability of chemicals was determined by calculating area under the plasma concentration curve over 24 h (AUC-24 h) using complete sets of data (> or =5 data points) and also three, two, and one selected time points. The best predictions of AUC-24 h were made when three time points were used, corresponding to Cmax, a mid-morning sample, and C(min). These values were found to be 103 +/- 10% of the original AUC-24 h, with 13 out of 17 values ranging between 96 and 105% of the original. Calculation of AUC-24 h from two samples (Cmax and Cmin) or one mid-morning sample afforded slightly larger variations in the calculated AUC-24 h (69-136% of the actual). Following drinking water exposure, prediction of AUC-24 h using 3 time points (Cmax, mid-morning, and Cmin) was very close to actual values (80-100%) among mice, while values for rats were only 63% of the original due to less frequent drinking behavior of rats during the light cycle. Collection and analysis of 1-3 blood samples per dose may provide insight into dose-proportional or non-dose-proportional differences in systemic bioavailability, pointing towards saturation of absorption or elimination or some other phenomenon warranting further investigation. In addition, collection of the terminal blood samples from rats, which is usually conducted after 18 h of fasting, will be helpful in rough estimation of blood/plasma half-life of the compound. The amount of chemical(s) and/or metabolite(s) in excreta and their possible use as biomarkers in predicting the daily systemic exposure levels are also discussed. Determining these parameters in the early stages of testing will provide critical information to improve the appropriate design of other longer-term toxicity studies.

  17. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Saghir, Shakil A.; Mendrala, Alan L.; Bartels, Michael J.

    Strategies were developed for the estimation of systemically available daily doses of chemicals, diurnal variations in blood levels, and rough elimination rates in subchronic feeding/drinking water studies, utilizing a minimal number of blood samples. Systemic bioavailability of chemicals was determined by calculating area under the plasma concentration curve over 24 h (AUC-24 h) using complete sets of data ({>=}5 data points) and also three, two, and one selected time points. The best predictions of AUC-24 h were made when three time points were used, corresponding to C {sub max}, a mid-morning sample, and C {sub min}. These values were foundmore » to be 103 {+-} 10% of the original AUC-24 h, with 13 out of 17 values ranging between 96 and 105% of the original. Calculation of AUC-24 h from two samples (C {sub max} and C {sub min}) or one mid-morning sample afforded slightly larger variations in the calculated AUC-24 h (69-136% of the actual). Following drinking water exposure, prediction of AUC-24 h using 3 time points (C {sub max}, mid-morning, and C {sub min}) was very close to actual values (80-100%) among mice, while values for rats were only 63% of the original due to less frequent drinking behavior of rats during the light cycle. Collection and analysis of 1-3 blood samples per dose may provide insight into dose-proportional or non-dose-proportional differences in systemic bioavailability, pointing towards saturation of absorption or elimination or some other phenomenon warranting further investigation. In addition, collection of the terminal blood samples from rats, which is usually conducted after 18 h of fasting, will be helpful in rough estimation of blood/plasma half-life of the compound. The amount of chemical(s) and/or metabolite(s) in excreta and their possible use as biomarkers in predicting the daily systemic exposure levels are also discussed. Determining these parameters in the early stages of testing will provide critical information to improve the appropriate design of other longer-term toxicity studies.« less

  18. Early infant diagnosis of HIV in Myanmar: call for innovative interventions to improve uptake and reduce turnaround time.

    PubMed

    Thiha, Soe; Shewade, Hemant Deepak; Philip, Sairu; Aung, Thet Ko; Kyaw, Nang Thu Thu; Oo, Myo Minn; Kyaw, Khine Wut Yee; War, May Wint; Oo, Htun Nyunt

    2017-01-01

    In collaboration with the national AIDS program, early infant diagnosis (EID) is implemented by Integrated HIV Care (IHC) program through its anti-retroviral therapy (ART) centers across 10 cities in five states and regions of Myanmar. Blood samples from the ART centers are sent using public transport to a centralized PCR facility. Among HIV-exposed babies <9 months at enrolment into IHC program (2013-15), to describe the EID cascade (enrolment, sample collection for PCR, result receipt by mother, HIV diagnosis and ART initiation) and factors associated with delayed (>8 weeks of age) or no blood sample collection for EID. Retrospective cohort study involving record review. A predictive poisson regression model with robust variance estimates was fitted for risk factors of delayed or no sample collection. Of 1349 babies, 523 (39%) of the babies' mothers were on ART before pregnancy. Timely uptake of EID (<8 weeks of age) was 47% (633/1349); sample collection was delayed in 27% (367/1349) and not done in 26% (349/1349) babies. Among samples collected (n = 1000), 667 results were received by the mother; 52 (5%) were HIV-infected; among them 42 (81%) were initiated on ART. Median (IQR) turnaround time from sample collection to result receipt by mother and time to initiate ART from result receipt by mother was 7 (4,12) and 8.5 (6,16) weeks, respectively. Mothers not on ART before pregnancy and distance of ART center from PCR facility (more than 128 km) were the risk factors of delayed or no sample collection. Improving provision of ART to mothers (through universal 'test and treat') is urgently required, which has the potential to improve the timely uptake of EID as well. Interventions to reduce turnaround times, like point of care EID testing and/or systematic use of mobile technology to communicate results, are needed.

  19. Optimal Number and Allocation of Data Collection Points for Linear Spline Growth Curve Modeling: A Search for Efficient Designs

    ERIC Educational Resources Information Center

    Wu, Wei; Jia, Fan; Kinai, Richard; Little, Todd D.

    2017-01-01

    Spline growth modelling is a popular tool to model change processes with distinct phases and change points in longitudinal studies. Focusing on linear spline growth models with two phases and a fixed change point (the transition point from one phase to the other), we detail how to find optimal data collection designs that maximize the efficiency…

  20. Methane oxidation at a surface-sealed boreal landfill.

    PubMed

    Einola, Juha; Sormunen, Kai; Lensu, Anssi; Leiskallio, Antti; Ettala, Matti; Rintala, Jukka

    2009-07-01

    Methane oxidation was studied at a closed boreal landfill (area 3.9 ha, amount of deposited waste 200,000 tonnes) equipped with a passive gas collection and distribution system and a methane oxidative top soil cover integrated in a European Union landfill directive-compliant, multilayer final cover. Gas wells and distribution pipes with valves were installed to direct landfill gas through the water impermeable layer into the top soil cover. Mean methane emissions at the 25 measuring points at four measurement times (October 2005-June 2006) were 0.86-6.2 m(3) ha(-1) h(-1). Conservative estimates indicated that at least 25% of the methane flux entering the soil cover at the measuring points was oxidized in October and February, and at least 46% in June. At each measurement time, 1-3 points showed significantly higher methane fluxes into the soil cover (20-135 m(3) ha(-1) h(-1)) and methane emissions (6-135 m(3) ha(-1) h(-1)) compared to the other points (< 20 m(3) ha(-1) h(-1) and < 10 m(3) ha(-1) h(-1), respectively). These points of methane overload had a high impact on the mean methane oxidation at the measuring points, resulting in zero mean oxidation at one measurement time (November). However, it was found that by adjusting the valves in the gas distribution pipes the occurrence of methane overload can be to some extent moderated which may increase methane oxidation. Overall, the investigated landfill gas treatment concept may be a feasible option for reducing methane emissions at landfills where a water impermeable cover system is used.

  1. 75 FR 78269 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Telephone...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-15

    ... for OMB Review; Comment Request; Telephone Point of Purchase Survey ACTION: Notice. SUMMARY: The... information collection request (ICR) titled, ``Telephone Point of Purchase Survey,'' to the Office [email protected] . SUPPLEMENTARY INFORMATION: The purpose of the Telephone Point of Purchase Survey is to...

  2. Efficient High Performance Collective Communication for Distributed Memory Environments

    ERIC Educational Resources Information Center

    Ali, Qasim

    2009-01-01

    Collective communication allows efficient communication and synchronization among a collection of processes, unlike point-to-point communication that only involves a pair of communicating processes. Achieving high performance for both kernels and full-scale applications running on a distributed memory system requires an efficient implementation of…

  3. Continuity of Functional-Somatic Symptoms from Late Childhood to Young Adulthood in a Community Sample

    ERIC Educational Resources Information Center

    Steinhausen, Hans-Christoph; Metzke, Christa Winkler

    2007-01-01

    Background: The goal of this study was to assess the course of functional-somatic symptoms from late childhood to young adulthood and the associations of these symptoms with young adult psychopathology. Methods: Data were collected in a large community sample at three different points in time (1994, 1997, and 2001). Functional-somatic symptoms…

  4. The Existential Self: Challenging and Renegotiating Gender Identity through Higher Education in England

    ERIC Educational Resources Information Center

    Fuller, Carol

    2018-01-01

    This article explores perceptions of the role of education as a potential medium of transformation and a vehicle to challenge and renegotiate symbolic and cultural notions of gender identity. Drawing on data collected at two time points over 10 years, it considers four young women from working-class backgrounds in England who aspired to and then…

  5. Transition in Modern Foreign Languages: A Longitudinal Study of Motivation for Language Learning and Second Language Proficiency

    ERIC Educational Resources Information Center

    Courtney, Louise

    2017-01-01

    The current longitudinal study examines the similarities and differences between primary and secondary foreign language curricula and pedagogy along with the development of motivation for language learning and second language proficiency. Data from 26 English learners of French (aged 10-11) were collected across three times points over a 12-month…

  6. Media Exposure, Current and Future Body Ideals, and Disordered Eating among Preadolescent Girls: A Longitudinal Panel Study

    ERIC Educational Resources Information Center

    Harrison, Kristen; Hefner, Veronica

    2006-01-01

    Internalization of the thin body ideal is considered by many to account for the relationship between media exposure and disordered eating among girls and young women, but almost all supporting research has employed adolescent and adult samples. Using longitudinal panel survey data collected from 257 preadolescent girls at 2 points in time 1 year…

  7. A Model for Predicting Cognitive and Emotional Health from Structural and Functional Neurocircuitry Following Traumatic Brain Injury

    DTIC Science & Technology

    2017-10-01

    Neuroimaging 2006 Reviewer, Journal of Abnormal Psychology 2006 Reviewer, Psychopharmacology 2006 Reviewer, Developmental Science 2006 Reviewer...This study will address this problem by collecting measures of white matter integrity and concomitant neuropsychological status at five time points...hypothesize that structural white matter tract disintegrity will underlie abnormalities in functional connectivity, neurocognitive performance and

  8. Adolescents' Deliberate Self-Harm, Interpersonal Stress, and the Moderating Effects of Self-Regulation: A Two-Wave Longitudinal Analysis

    ERIC Educational Resources Information Center

    Jutengren, Goran; Kerr, Margaret; Stattin, Hakan

    2011-01-01

    The predictive effects of peer victimization and harsh parenting on deliberate self-harm were examined. As derived from the experiential avoidance model, the study also tested whether these links were moderated by individual self-regulation approaches. Data were collected at two points in time from 880 junior high school students (mean age =…

  9. Operating manual for the RRL 8 channel data logger

    NASA Technical Reports Server (NTRS)

    Paluch, E. J.; Shelton, J. D.; Gardner, C. S.

    1979-01-01

    A data collection device which takes measurements from external sensors at user specified time intervals is described. Three sensor ports are dedicated to temperature, air pressure, and dew point. Five general purpose sensor ports are provided. The user specifies when the measurements are recorded as well as when the information is read or stored in a minicomputer or a paper tape.

  10. Techniques used for the analysis of oculometer eye-scanning data obtained from an air traffic control display

    NASA Technical Reports Server (NTRS)

    Crawford, Daniel J.; Burdette, Daniel W.; Capron, William R.

    1993-01-01

    The methodology and techniques used to collect and analyze look-point position data from a real-time ATC display-format comparison experiment are documented. That study compared the delivery precision and controller workload of three final approach spacing aid display formats. Using an oculometer, controller lookpoint position data were collected, associated with gaze objects (e.g., moving aircraft) on the ATC display, and analyzed to determine eye-scan behavior. The equipment involved and algorithms for saving, synchronizing with the ATC simulation output, and filtering the data are described. Target (gaze object) and cross-check scanning identification algorithms are also presented. Data tables are provided of total dwell times, average dwell times, and cross-check scans. Flow charts, block diagrams, file record descriptors, and source code are included. The techniques and data presented are intended to benefit researchers in other studies that incorporate non-stationary gaze objects and oculometer equipment.

  11. Peeling Away Timing Error in NetFlow Data

    NASA Astrophysics Data System (ADS)

    Trammell, Brian; Tellenbach, Bernhard; Schatzmann, Dominik; Burkhart, Martin

    In this paper, we characterize, quantify, and correct timing errors introduced into network flow data by collection and export via Cisco NetFlow version 9. We find that while some of these sources of error (clock skew, export delay) are generally implementation-dependent and known in the literature, there is an additional cyclic error of up to one second that is inherent to the design of the export protocol. We present a method for correcting this cyclic error in the presence of clock skew and export delay. In an evaluation using traffic with known timing collected from a national-scale network, we show that this method can successfully correct the cyclic error. However, there can also be other implementation-specific errors for which insufficient information remains for correction. On the routers we have deployed in our network, this limits the accuracy to about 70ms, reinforcing the point that implementation matters when conducting research on network measurement data.

  12. Signal processing of anthropometric data

    NASA Astrophysics Data System (ADS)

    Zimmermann, W. J.

    1983-09-01

    The Anthropometric Measurements Laboratory has accumulated a large body of data from a number of previous experiments. The data is very noisy, therefore it requires the application of some signal processing schemes. Moreover, it was not regarded as time series measurements but as positional information; hence, the data is stored as coordinate points as defined by the motion of the human body. The accumulated data defines two groups or classes. Some of the data was collected from an experiment designed to measure the flexibility of the limbs, referred to as radial movement. The remaining data was collected from experiments designed to determine the surface of the reach envelope. An interactive signal processing package was designed and implemented. Since the data does not include time this package does not include a time series element. Presently the results is restricted to processing data obtained from those experiments designed to measure flexibility.

  13. Signal processing of anthropometric data

    NASA Technical Reports Server (NTRS)

    Zimmermann, W. J.

    1983-01-01

    The Anthropometric Measurements Laboratory has accumulated a large body of data from a number of previous experiments. The data is very noisy, therefore it requires the application of some signal processing schemes. Moreover, it was not regarded as time series measurements but as positional information; hence, the data is stored as coordinate points as defined by the motion of the human body. The accumulated data defines two groups or classes. Some of the data was collected from an experiment designed to measure the flexibility of the limbs, referred to as radial movement. The remaining data was collected from experiments designed to determine the surface of the reach envelope. An interactive signal processing package was designed and implemented. Since the data does not include time this package does not include a time series element. Presently the results is restricted to processing data obtained from those experiments designed to measure flexibility.

  14. The relevance of time series in molecular ecology and conservation biology.

    PubMed

    Habel, Jan C; Husemann, Martin; Finger, Aline; Danley, Patrick D; Zachos, Frank E

    2014-05-01

    The genetic structure of a species is shaped by the interaction of contemporary and historical factors. Analyses of individuals from the same population sampled at different points in time can help to disentangle the effects of current and historical forces and facilitate the understanding of the forces driving the differentiation of populations. The use of such time series allows for the exploration of changes at the population and intraspecific levels over time. Material from museum collections plays a key role in understanding and evaluating observed population structures, especially if large numbers of individuals have been sampled from the same locations at multiple time points. In these cases, changes in population structure can be assessed empirically. The development of new molecular markers relying on short DNA fragments (such as microsatellites or single nucleotide polymorphisms) allows for the analysis of long-preserved and partially degraded samples. Recently developed techniques to construct genome libraries with a reduced complexity and next generation sequencing and their associated analysis pipelines have the potential to facilitate marker development and genotyping in non-model species. In this review, we discuss the problems with sampling and available marker systems for historical specimens and demonstrate that temporal comparative studies are crucial for the estimation of important population genetic parameters and to measure empirically the effects of recent habitat alteration. While many of these analyses can be performed with samples taken at a single point in time, the measurements are more robust if multiple points in time are studied. Furthermore, examining the effects of habitat alteration, population declines, and population bottlenecks is only possible if samples before and after the respective events are included. © 2013 The Authors. Biological Reviews © 2013 Cambridge Philosophical Society.

  15. Do Diagnosis Delays Impact Receipt of Test Results? Evidence from the HIV Early Infant Diagnosis Program in Uganda

    PubMed Central

    Mugambi, Melissa Latigo; Deo, Sarang; Kekitiinwa, Adeodata; Kiyaga, Charles; Singer, Mendel E.

    2013-01-01

    Background There is scant evidence on the association between diagnosis delays and the receipt of test results in HIV Early Infant Diagnosis (EID) programs. We determine the association between diagnosis delays and other health care system and patient factors on result receipt. Methods We reviewed 703 infant HIV test records for tests performed between January 2008 and February 2009 at a regional referral hospital and level four health center in Uganda. The main outcome was caregiver receipt of the test result. The primary study variable was turnaround time (time between sample collection and result availability at the health facility). Additional variables included clinic entry point, infant age at sample collection, reported HIV status and receipt of antiretroviral prophylaxis for prevention of mother-to-child transmission. We conducted a pooled analysis in addition to separate analyses for each facility. We estimated the relative risk of result receipt using modified Poisson regression with robust standard errors. Results Overall, the median result turnaround time, was 38 days. 59% of caregivers received infant test results. Caregivers were less likely to receive results at turnaround times greater than 49 days compared to 28 days or fewer (ARR = 0.83; 95% CI = 0.70–0.98). Caregivers were more likely to receive results at the PMTCT clinic (ARR = 1.81; 95% CI = 1.40–2.33) and less likely at the pediatric ward (ARR = 0.54; 95% CI = 0.37–0.81) compared to the immunization clinic. At the level four health center, result receipt was half as likely among infants older than 9 months compared to 3 months and younger (ARR= 0.47; 95% CI = 0.25–0.93). Conclusion In this study setting, we find evidence that longer turnaround times, clinic entry point and age at sample collection may be associated with receipt of infant HIV test results. PMID:24282502

  16. Extending the Search for Neutrino Point Sources with IceCube above the Horizon

    NASA Astrophysics Data System (ADS)

    Abbasi, R.; Abdou, Y.; Abu-Zayyad, T.; Adams, J.; Aguilar, J. A.; Ahlers, M.; Andeen, K.; Auffenberg, J.; Bai, X.; Baker, M.; Barwick, S. W.; Bay, R.; Alba, J. L. Bazo; Beattie, K.; Beatty, J. J.; Bechet, S.; Becker, J. K.; Becker, K.-H.; Benabderrahmane, M. L.; Berdermann, J.; Berghaus, P.; Berley, D.; Bernardini, E.; Bertrand, D.; Besson, D. Z.; Bissok, M.; Blaufuss, E.; Boersma, D. J.; Bohm, C.; Botner, O.; Bradley, L.; Braun, J.; Breder, D.; Carson, M.; Castermans, T.; Chirkin, D.; Christy, B.; Clem, J.; Cohen, S.; Cowen, D. F.; D'Agostino, M. V.; Danninger, M.; Day, C. T.; de Clercq, C.; Demirörs, L.; Depaepe, O.; Descamps, F.; Desiati, P.; de Vries-Uiterweerd, G.; Deyoung, T.; Díaz-Vélez, J. C.; Dreyer, J.; Dumm, J. P.; Duvoort, M. R.; Edwards, W. R.; Ehrlich, R.; Eisch, J.; Ellsworth, R. W.; Engdegård, O.; Euler, S.; Evenson, P. A.; Fadiran, O.; Fazely, A. R.; Feusels, T.; Filimonov, K.; Finley, C.; Foerster, M. M.; Fox, B. D.; Franckowiak, A.; Franke, R.; Gaisser, T. K.; Gallagher, J.; Ganugapati, R.; Gerhardt, L.; Gladstone, L.; Goldschmidt, A.; Goodman, J. A.; Gozzini, R.; Grant, D.; Griesel, T.; Groß, A.; Grullon, S.; Gunasingha, R. M.; Gurtner, M.; Ha, C.; Hallgren, A.; Halzen, F.; Han, K.; Hanson, K.; Hasegawa, Y.; Helbing, K.; Herquet, P.; Hickford, S.; Hill, G. C.; Hoffman, K. D.; Homeier, A.; Hoshina, K.; Hubert, D.; Huelsnitz, W.; Hülß, J.-P.; Hulth, P. O.; Hultqvist, K.; Hussain, S.; Imlay, R. L.; Inaba, M.; Ishihara, A.; Jacobsen, J.; Japaridze, G. S.; Johansson, H.; Joseph, J. M.; Kampert, K.-H.; Kappes, A.; Karg, T.; Karle, A.; Kelley, J. L.; Kemming, N.; Kenny, P.; Kiryluk, J.; Kislat, F.; Klein, S. R.; Knops, S.; Kohnen, G.; Kolanoski, H.; Köpke, L.; Koskinen, D. J.; Kowalski, M.; Kowarik, T.; Krasberg, M.; Krings, T.; Kroll, G.; Kuehn, K.; Kuwabara, T.; Labare, M.; Lafebre, S.; Laihem, K.; Landsman, H.; Lauer, R.; Lehmann, R.; Lennarz, D.; Lundberg, J.; Lünemann, J.; Madsen, J.; Majumdar, P.; Maruyama, R.; Mase, K.; Matis, H. S.; McParland, C. P.; Meagher, K.; Merck, M.; Mészáros, P.; Meures, T.; Middell, E.; Milke, N.; Miyamoto, H.; Montaruli, T.; Morse, R.; Movit, S. M.; Nahnhauer, R.; Nam, J. W.; Nießen, P.; Nygren, D. R.; Odrowski, S.; Olivas, A.; Olivo, M.; Ono, M.; Panknin, S.; Patton, S.; Paul, L.; de Los Heros, C. Pérez; Petrovic, J.; Piegsa, A.; Pieloth, D.; Pohl, A. C.; Porrata, R.; Potthoff, N.; Price, P. B.; Prikockis, M.; Przybylski, G. T.; Rawlins, K.; Redl, P.; Resconi, E.; Rhode, W.; Ribordy, M.; Rizzo, A.; Rodrigues, J. P.; Roth, P.; Rothmaier, F.; Rott, C.; Roucelle, C.; Rutledge, D.; Ruzybayev, B.; Ryckbosch, D.; Sander, H.-G.; Sarkar, S.; Schatto, K.; Schlenstedt, S.; Schmidt, T.; Schneider, D.; Schukraft, A.; Schulz, O.; Schunck, M.; Seckel, D.; Semburg, B.; Seo, S. H.; Sestayo, Y.; Seunarine, S.; Silvestri, A.; Slipak, A.; Spiczak, G. M.; Spiering, C.; Stamatikos, M.; Stanev, T.; Stephens, G.; Stezelberger, T.; Stokstad, R. G.; Stoufer, M. C.; Stoyanov, S.; Strahler, E. A.; Straszheim, T.; Sullivan, G. W.; Swillens, Q.; Taboada, I.; Tamburro, A.; Tarasova, O.; Tepe, A.; Ter-Antonyan, S.; Terranova, C.; Tilav, S.; Toale, P. A.; Tooker, J.; Tosi, D.; Turčan, D.; van Eijndhoven, N.; Vandenbroucke, J.; van Overloop, A.; van Santen, J.; Voigt, B.; Walck, C.; Waldenmaier, T.; Wallraff, M.; Walter, M.; Wendt, C.; Westerhoff, S.; Whitehorn, N.; Wiebe, K.; Wiebusch, C. H.; Wiedemann, A.; Wikström, G.; Williams, D. R.; Wischnewski, R.; Wissing, H.; Woschnagg, K.; Xu, C.; Xu, X. W.; Yodh, G.; Yoshida, S.

    2009-11-01

    Point source searches with the IceCube neutrino telescope have been restricted to one hemisphere, due to the exclusive selection of upward going events as a way of rejecting the atmospheric muon background. We show that the region above the horizon can be included by suppressing the background through energy-sensitive cuts. This improves the sensitivity above PeV energies, previously not accessible for declinations of more than a few degrees below the horizon due to the absorption of neutrinos in Earth. We present results based on data collected with 22 strings of IceCube, extending its field of view and energy reach for point source searches. No significant excess above the atmospheric background is observed in a sky scan and in tests of source candidates. Upper limits are reported, which for the first time cover point sources in the southern sky up to EeV energies.

  17. [Patient satisfaction in a laboratory test collection unit].

    PubMed

    de Moura, Gisela Maria Schebella Souto; Hilleshein, Eunice Fabiani; Schardosim, Juliana Machado; Delgado, Kátia Simone

    2008-06-01

    This exploratory descriptive study aimed at identifying customer satisfaction attributes in the field of laboratory tests. Data were collected in 2006, using 104 interviews in a laboratorial unit inside a teaching hospital, using the critical incident technique, and submitted to content analysis. Three attribute categories were identified: time spent in waiting for care, interpersonal contact, and technical skills. These results subsidize the assessment of the current satisfaction survey tool, and point to its reformulation. They also allow the identification of improvement needs in customer attention, and provide elements to be taken into account in personnel selection, training programs, personnel performance assessment.

  18. Principal Facts of Gravity data in the Northern Willamette Valley and Vicinity, Northwestern Oregon and Southwestern Washington

    USGS Publications Warehouse

    Morin, Robert L.; Wheeler, Karen L.; McPhee, Darcy K.; Dinterman, Philip A.; Watt, Janet T.

    2007-01-01

    Gravity data were collected from 2004 through 2006 to assist in mapping subsurface geology in the northern Willamette Valley and vicinity, northwestern Oregon and southwestern Washington. Prior to this effort to improve the gravity data coverage in the study area, very little regional data were available. This report gives the principle facts for 2710 new gravity stations and 1446 preexisting gravity stations. Much of the study area is now covered with data of sufficient density to define basin boundaries and correlate with many of the larger fault systems. ,p> The study area lies between 44? 52.5 and 46? N latitude and between 122? 15 and 123? 37.5 W longitude. Although this is a continuing project and more gravity data is expected to be collected, this report is being published to show the progress of the data collection. The majority of these data are spaced at about 1.6 km (1 mile), but three closely spaced profiles were measured in the Portland area across several faults. To obtain a 1.6 km grid of data points would require about 5120 gravity stations. To date we have collected 2710 stations. Including the preexisting data points, the total number of stations is 4156, and complete regional coverage is about 80 percent at this time.

  19. Collection of process data after cardiac surgery: initial implementation with a Java-based intranet applet.

    PubMed

    Ratcliffe, M B; Khan, J H; Magee, K M; McElhinney, D B; Hubner, C

    2000-06-01

    Using a Java-based intranet program (applet), we collected postoperative process data after coronary artery bypass grafting. A Java-based applet was developed and deployed on a hospital intranet. Briefly, the nurse entered patient process data using a point and click interface. The applet generated a nursing note, and process data were saved in a Microsoft Access database. In 10 patients, this method was validated by comparison with a retrospective chart review. In 45 consecutive patients, weekly control charts were generated from the data. When aberrations from the pathway occurred, feedback was initiated to restore the goals of the critical pathway. The intranet process data collection method was verified by a manual chart review with 98% sensitivity. The control charts for time to extubation, intensive care unit stay, and hospital stay showed a deviation from critical pathway goals after the first 20 patients. Feedback modulation was associated with a return to critical pathway goals. Java-based applets are inexpensive and can collect accurate postoperative process data, identify critical pathway deviations, and allow timely feedback of process data.

  20. Using Data Visualization to Examine an Academic Library Collection

    ERIC Educational Resources Information Center

    Finch, Jannette L.; Flenner, Angela R.

    2016-01-01

    The authors generated data visualizations to compare sections of the library book collection, expenditures in those areas, student enrollment in majors and minors, and number of courses. The visualizations resulting from the entered data provide an excellent starting point for conversations about possible imbalances in the collection and point to…

  1. Time-of-travel data for Nebraska streams, 1968 to 1977

    USGS Publications Warehouse

    Petri, L.R.

    1984-01-01

    This report documents the results of 10 time-of-travel studies, using ' dye-tracer ' methods, conducted on five streams in Nebraska during the period 1968 to 1977. Streams involved in the studies were the North Platte, North Loup, Elkhorn, and Big Blue Rivers and Salt Creek. Rhodamine WT dye in a 20 percent solution was used as the tracer for all 10 time-of-travel studies. Water samples were collected at several points below each injection site. Concentrations of dye in the samples were measured by determining fluorescence of the sample and comparing that value to fluorescence-concentration curves. Stream discharges were measured before and during each study. Results of each time-by-travel study are shown on two tables and on graph. The first table shows water discharge at injection and sampling sites, distance between sites, and time and rate of travel of the dye between sites. The second table provides descriptions of study sites, amounts of dye injected in the streams, actual sampling times, and actual concentrations of dye detected. The graphs for each time-of-travel study provide indications of changing travel rates between sampling sites, information on length of dye clouds, and times for dye passage past given points. (USGS)

  2. Ground Control Point - Wireless System Network for UAV-based environmental monitoring applications

    NASA Astrophysics Data System (ADS)

    Mejia-Aguilar, Abraham

    2016-04-01

    In recent years, Unmanned Aerial Vehicles (UAV) have seen widespread civil applications including usage for survey and monitoring services in areas such as agriculture, construction and civil engineering, private surveillance and reconnaissance services and cultural heritage management. Most aerial monitoring services require the integration of information acquired during the flight (such as imagery) with ground-based information (such as GPS information or others) for improved ground truth validation. For example, to obtain an accurate 3D and Digital Elevation Model based on aerial imagery, it is necessary to include ground-based information of coordinate points, which are normally acquired with surveying methods based on Global Position Systems (GPS). However, GPS surveys are very time consuming and especially for longer time series of monitoring data repeated GPS surveys are necessary. In order to improve speed of data collection and integration, this work presents an autonomous system based on Waspmote technologies build on single nodes interlinked in a Wireless Sensor Network (WSN) star-topology for ground based information collection and later integration with surveying data obtained by UAV. Nodes are designed to be visible from the air, to resist extreme weather conditions with low-power consumption. Besides, nodes are equipped with GPS as well as Inertial Measurement Unit (IMU), accelerometer, temperature and soil moisture sensors and thus provide significant advantages in a broad range of applications for environmental monitoring. For our purpose, the WSN transmits the environmental data with 3G/GPRS to a database on a regular time basis. This project provides a detailed case study and implementation of a Ground Control Point System Network for UAV-based vegetation monitoring of dry mountain grassland in the Matsch valley, Italy.

  3. Shift work, long working hours, and later risk of dementia: A long-term follow-up of the Copenhagen Male Study.

    PubMed

    Nabe-Nielsen, Kirsten; Garde, Anne Helene; Ishtiak-Ahmed, Kazi; Gyntelberg, Finn; Mortensen, Erik Lykke; Phung, Thien Kieu Thi; Rod, Naja Hulvej; Waldemar, Gunhild; Westendorp, Rudi Gj; Hansen, Åse Marie

    2017-11-01

    Objectives The aim of this study was to investigate the effect of shift work and long working hours in midlife on the risk of dementia in old age. Methods The present study comprised 4766 participants from the Copenhagen Male Study. We used information on shift work (collected in 1970-1971 and 1985-1986), long working hours defined as >45 hours per week (collected in 1970-1971), socioeconomic status, sleep, stress, and cardiovascular risk factors. Information about dementia diagnoses was obtained from registers. Participants were followed until 2014 (mean length of follow-up was 17.8 years). We employed Poisson regression for the survival analyses and estimated incidence rate ratios (IRR) and their 95% confidence intervals (CI). Results We found no statistically significant association between shift work (IRR 0.86, 95% CI 0.70-1.05) or long working hours (IRR 0.97, 95% CI 0.79-1.19) and dementia. Adjustment for potential confounders and mediators did not change the estimates. Working shifts at both time points of exposure assessment was not associated with a higher incidence of dementia compared with non-shift workers at both time points (IRR 0.99, 95% CI 0.69-1.42). The lowest incidence of dementia was observed among participants who reported shift work at one time point (only in 1985-1986: IRR 0.44, 95% CI 0.16-1.23 and only in 1970-1971: IRR 0.58, 95% CI 0.31-1.11). Conclusion We did not find positive evidence of an association between shift work or long working hours and the incidence of dementia, but the negative findings may reflect the crude assessment of shift work and long working hours, which is a major limitation of the present study.

  4. Atmospheric plume progression as a function of time and distance from the release point for radioactive isotopes.

    PubMed

    Eslinger, Paul W; Bowyer, Ted W; Cameron, Ian M; Hayes, James C; Miley, Harry S

    2015-10-01

    The radionuclide network of the International Monitoring System comprises up to 80 stations around the world that have aerosol and xenon monitoring systems designed to detect releases of radioactive materials to the atmosphere from nuclear explosions. A rule of thumb description of plume concentration and duration versus time and distance from the release point is useful when designing and deploying new sample collection systems. This paper uses plume development from atmospheric transport modeling to provide a power-law rule describing atmospheric dilution factors as a function of distance from the release point. Consider the plume center-line concentration seen by a ground-level sampler as a function of time based on a short-duration ground-level release of a nondepositing radioactive tracer. The concentration C (Bq m(-3)) near the ground varies with distance from the source with the relationship C=R×A(D,C) ×e (-λ(-1.552+0.0405×D)) × 5.37×10(-8) × D(-2.35) where R is the release magnitude (Bq), D is the separation distance (km) from the ground level release to the measurement location, λ is the decay constant (h(-1)) for the radionuclide of interest and AD,C is an attenuation factor that depends on the length of the sample collection period. This relationship is based on the median concentration for 10 release locations with different geographic characteristics and 365 days of releases at each location, and it has an R(2) of 0.99 for 32 distances from 100 to 3000 km. In addition, 90 percent of the modeled plumes fall within approximately one order of magnitude of this curve for all distances. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. On the mode-coupling treatment of collective density fluctuations for quantum liquids: para-hydrogen and normal liquid helium.

    PubMed

    Kletenik-Edelman, Orly; Reichman, David R; Rabani, Eran

    2011-01-28

    A novel quantum mode coupling theory combined with a kinetic approach is developed for the description of collective density fluctuations in quantum liquids characterized by Boltzmann statistics. Three mode-coupling approximations are presented and applied to study the dynamic response of para-hydrogen near the triple point and normal liquid helium above the λ-transition. The theory is compared with experimental results and to the exact imaginary time data generated by path integral Monte Carlo simulations. While for liquid para-hydrogen the combination of kinetic and quantum mode-coupling theory provides semi-quantitative results for both short and long time dynamics, it fails for normal liquid helium. A discussion of this failure based on the ideal gas limit is presented.

  6. The 1983 tail-era series. Volume 1: ISEE 3 plasma

    NASA Technical Reports Server (NTRS)

    Fairfield, D. H.; Phillips, J. L.

    1991-01-01

    Observations from the ISEE 3 electron analyzer are presented in plots. Electrons were measured in 15 continuous energy levels between 8.5 and 1140 eV during individual 3-sec spacecraft spins. Times associated with each data point are the beginning time of the 3 sec data collection interval. Moments calculated from the measured distribution function are shown as density, temperature, velocity, and velocity azimuthal angle. Spacecraft ephemeris is shown at the bottom in GSE and GSM coordinates in units of Earth radii, with vertical ticks on the time axis corresponding to the printed positions.

  7. Robotics and dynamic image analysis for studies of gene expression in plant tissues.

    PubMed

    Hernandez-Garcia, Carlos M; Chiera, Joseph M; Finer, John J

    2010-05-05

    Gene expression in plant tissues is typically studied by destructive extraction of compounds from plant tissues for in vitro analyses. The methods presented here utilize the green fluorescent protein (gfp) gene for continual monitoring of gene expression in the same pieces of tissues, over time. The gfp gene was placed under regulatory control of different promoters and introduced into lima bean cotyledonary tissues via particle bombardment. Cotyledons were then placed on a robotic image collection system, which consisted of a fluorescence dissecting microscope with a digital camera and a 2-dimensional robotics platform custom-designed to allow secure attachment of culture dishes. Images were collected from cotyledonary tissues every hour for 100 hours to generate expression profiles for each promoter. Each collected series of 100 images was first subjected to manual image alignment using ImageReady to make certain that GFP-expressing foci were consistently retained within selected fields of analysis. Specific regions of the series measuring 300 x 400 pixels, were then selected for further analysis to provide GFP Intensity measurements using ImageJ software. Batch images were separated into the red, green and blue channels and GFP-expressing areas were identified using the threshold feature of ImageJ. After subtracting the background fluorescence (subtraction of gray values of non-expressing pixels from every pixel) in the respective red and green channels, GFP intensity was calculated by multiplying the mean grayscale value per pixel by the total number of GFP-expressing pixels in each channel, and then adding those values for both the red and green channels. GFP Intensity values were collected for all 100 time points to yield expression profiles. Variations in GFP expression profiles resulted from differences in factors such as promoter strength, presence of a silencing suppressor, or nature of the promoter. In addition to quantification of GFP intensity, the image series were also used to generate time-lapse animations using ImageReady. Time-lapse animations revealed that the clear majority of cells displayed a relatively rapid increase in GFP expression, followed by a slow decline. Some cells occasionally displayed a sudden loss of fluorescence, which may be associated with rapid cell death. Apparent transport of GFP across the membrane and cell wall to adjacent cells was also observed. Time lapse animations provided additional information that could not otherwise be obtained using GFP Intensity profiles or single time point image collections.

  8. Time Resolved PIV for Space-Time Correlations in Hot Jets

    NASA Technical Reports Server (NTRS)

    Wernet, Mark P.

    2007-01-01

    Temporally Resolved Particle Image Velocimetry (TR-PIV) is the newest and most exciting tool recently developed to support our continuing efforts to characterize and improve our understanding of the decay of turbulence in jet flows -- a critical element for understanding the acoustic properties of the flow. A new TR-PIV system has been developed at the NASA Glenn Research Center which is capable of acquiring planar PIV image frame pairs at up to 25 kHz. The data reported here were collected at Mach numbers of 0.5 and 0.9 and at temperature ratios of 0.89 and 1.76. The field of view of the TR-PIV system covered 6 nozzle diameters along the lip line of the 50.8 mm diameter jet. The cold flow data at Mach 0.5 were compared with hotwire anemometry measurements in order to validate the new TR-PIV technique. The axial turbulence profiles measured across the shear layer using TR-PIV were thinner than those measured using hotwire anemometry and remained centered along the nozzle lip line. The collected TR-PIV data illustrate the differences in the single point statistical flow properties of cold and hot jet flows. The planar, time-resolved velocity records were then used to compute two-point space-time correlations of the flow at the Mach 0.9 flow condition. The TR-PIV results show that there are differences in the convective velocity and growth rate of the turbulent structures between cold and hot flows at the same Mach number

  9. Social representations, individual and collective mind: a study of Wundt, Cattaneo and Moscovici.

    PubMed

    Tateo, Luca; Iannaccone, Antonio

    2012-03-01

    The paper presents a discussion on the role of Social Representations in the articulation between individual and collective dimensions of mental activity. An analysis of some concepts in the works of Wundt and Cattaneo is the starting point for a discussion of the relationship between individual processes, practices, artifacts, symbolic systems and functions of Social Representations in the development of culture and individuals. In this perspective, Social Representations could be considered a space of negotiation of the meaning. The relationship between Social Representations, symbolic systems, practices and sense making involves the elaboration of the tension between continuity and innovation, which is developed through communication and practice along time in the interaction between individual and collective minds.

  10. Collective phase description of oscillatory convection

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kawamura, Yoji, E-mail: ykawamura@jamstec.go.jp; Nakao, Hiroya

    We formulate a theory for the collective phase description of oscillatory convection in Hele-Shaw cells. It enables us to describe the dynamics of the oscillatory convection by a single degree of freedom which we call the collective phase. The theory can be considered as a phase reduction method for limit-cycle solutions in infinite-dimensional dynamical systems, namely, stable time-periodic solutions to partial differential equations, representing the oscillatory convection. We derive the phase sensitivity function, which quantifies the phase response of the oscillatory convection to weak perturbations applied at each spatial point, and analyze the phase synchronization between two weakly coupled Hele-Shawmore » cells exhibiting oscillatory convection on the basis of the derived phase equations.« less

  11. Mapping stream habitats with a global positioning system: Accuracy, precision, and comparison with traditional methods

    USGS Publications Warehouse

    Dauwalter, D.C.; Fisher, W.L.; Belt, K.C.

    2006-01-01

    We tested the precision and accuracy of the Trimble GeoXT??? global positioning system (GPS) handheld receiver on point and area features and compared estimates of stream habitat dimensions (e.g., lengths and areas of riffles and pools) that were made in three different Oklahoma streams using the GPS receiver and a tape measure. The precision of differentially corrected GPS (DGPS) points was not affected by the number of GPS position fixes (i.e., geographic location estimates) averaged per DGPS point. Horizontal error of points ranged from 0.03 to 2.77 m and did not differ with the number of position fixes per point. The error of area measurements ranged from 0.1% to 110.1% but decreased as the area increased. Again, error was independent of the number of position fixes averaged per polygon corner. The estimates of habitat lengths, widths, and areas did not differ when measured using two methods of data collection (GPS and a tape measure), nor did the differences among methods change at three stream sites with contrasting morphologies. Measuring features with a GPS receiver was up to 3.3 times faster on average than using a tape measure, although signal interference from high streambanks or overhanging vegetation occasionally limited satellite signal availability and prolonged measurements with a GPS receiver. There were also no differences in precision of habitat dimensions when mapped using a continuous versus a position fix average GPS data collection method. Despite there being some disadvantages to using the GPS in stream habitat studies, measuring stream habitats with a GPS resulted in spatially referenced data that allowed the assessment of relative habitat position and changes in habitats over time, and was often faster than using a tape measure. For most spatial scales of interest, the precision and accuracy of DGPS data are adequate and have logistical advantages when compared to traditional methods of measurement. ?? 2006 Springer Science+Business Media, Inc.

  12. Comprehensive Metabolomics Study To Assess Longitudinal Biochemical Changes and Potential Early Biomarkers in Nonobese Diabetic Mice That Progress to Diabetes.

    PubMed

    Buchwald, Peter; Tamayo-Garcia, Alejandro; Ramamoorthy, Sivapriya; Garcia-Contreras, Marta; Mendez, Armando J; Ricordi, Camillo

    2017-10-06

    A global nontargeted longitudinal metabolomics study was carried out in male and female NOD mice to characterize the time-profile of the changes in the metabolic signature caused by onset of type 1 diabetes (T1D) and identify possible early biomarkers in T1D progressors. Metabolomics profiling of samples collected at five different time-points identified 676 and 706 biochemicals in blood and feces, respectively. Several metabolites were expressed at significantly different levels in progressors at all time-points, and their proportion increased strongly following onset of hyperglycemia. At the last time-point, when all progressors were diabetic, a large percentage of metabolites had significantly different levels: 57.8% in blood and 27.8% in feces. Metabolic pathways most strongly affected included the carbohydrate, lipid, branched-chain amino acid, and oxidative ones. Several biochemicals showed considerable (>4×) change. Maltose, 3-hydroxybutyric acid, and kojibiose increased, while 1,5-anhydroglucitol decreased more than 10-fold. At the earliest time-point (6-week), differences between the metabolic signatures of progressors and nonprogressors were relatively modest. Nevertheless, several compounds had significantly different levels and show promise as possible early T1D biomarkers. They include fatty acid phosphocholine derivatives from the phosphatidylcholine subpathway (elevated in both blood and feces) as well as serotonin, ribose, and arabinose (increased) in blood plus 13-HODE, tocopherol (increased), diaminopimelate, valerate, hydroxymethylpyrimidine, and dulcitol (decreased) in feces. A combined metabolic signature based on these compounds might serve as an early predictor of T1D-progressors.

  13. ICESAT Laser Altimeter Pointing, Ranging and Timing Calibration from Integrated Residual Analysis

    NASA Technical Reports Server (NTRS)

    Luthcke, Scott B.; Rowlands, D. D.; Carabajal, C. C.; Harding, D. H.; Bufton, J. L.; Williams, T. A.

    2003-01-01

    On January 12, 2003 the Ice, Cloud and land Elevation Satellite (ICESat) was successfully placed into orbit. The ICESat mission carries the Geoscience Laser Altimeter System (GLAS), which has a primary measurement of short-pulse laser- ranging to the Earth s surface at 1064nm wavelength at a rate of 40 pulses per second. The instrument has collected precise elevation measurements of the ice sheets, sea ice roughness and thickness, ocean and land surface elevations and surface reflectivity. The accurate geolocation of GLAS s surface returns, the spots from which the laser energy reflects on the Earth s surface, is a critical issue in the scientific application of these data. Pointing, ranging, timing and orbit errors must be compensated to accurately geolocate the laser altimeter surface returns. Towards this end, the laser range observations can be fully exploited in an integrated residual analysis to accurately calibrate these geolocation/instrument parameters. ICESat laser altimeter data have been simultaneously processed as direct altimetry from ocean sweeps along with dynamic crossovers in order to calibrate pointing, ranging and timing. The calibration methodology and current calibration results are discussed along with future efforts.

  14. ICESat Laser Altimeter Pointing, Ranging and Timing Calibration from Integrated Residual Analysis: A Summary of Early Mission Results

    NASA Technical Reports Server (NTRS)

    Lutchke, Scott B.; Rowlands, David D.; Harding, David J.; Bufton, Jack L.; Carabajal, Claudia C.; Williams, Teresa A.

    2003-01-01

    On January 12, 2003 the Ice, Cloud and land Elevation Satellite (ICESat) was successfUlly placed into orbit. The ICESat mission carries the Geoscience Laser Altimeter System (GLAS), which consists of three near-infrared lasers that operate at 40 short pulses per second. The instrument has collected precise elevation measurements of the ice sheets, sea ice roughness and thickness, ocean and land surface elevations and surface reflectivity. The accurate geolocation of GLAS's surface returns, the spots from which the laser energy reflects on the Earth's surface, is a critical issue in the scientific application of these data Pointing, ranging, timing and orbit errors must be compensated to accurately geolocate the laser altimeter surface returns. Towards this end, the laser range observations can be fully exploited in an integrated residual analysis to accurately calibrate these geolocation/instrument parameters. Early mission ICESat data have been simultaneously processed as direct altimetry from ocean sweeps along with dynamic crossovers resulting in a preliminary calibration of laser pointing, ranging and timing. The calibration methodology and early mission analysis results are summarized in this paper along with future calibration activities

  15. Human presence impacts fungal diversity of inflated lunar/Mars analog habitat.

    PubMed

    Blachowicz, A; Mayer, T; Bashir, M; Pieber, T R; De León, P; Venkateswaran, K

    2017-07-11

    An inflatable lunar/Mars analog habitat (ILMAH), simulated closed system isolated by HEPA filtration, mimics International Space Station (ISS) conditions and future human habitation on other planets except for the exchange of air between outdoor and indoor environments. The ILMAH was primarily commissioned to measure physiological, psychological, and immunological characteristics of human inhabiting in isolation, but it was also available for other studies such as examining its microbiological aspects. Characterizing and understanding possible changes and succession of fungal species is of high importance since fungi are not only hazardous to inhabitants but also deteriorate the habitats. Observing the mycobiome changes in the presence of human will enable developing appropriate countermeasures with reference to crew health in a future closed habitat. Succession of fungi was characterized utilizing both traditional and state-of-the-art molecular techniques during the 30-day human occupation of the ILMAH. Surface samples were collected at various time points and locations to observe both the total and viable fungal populations of common environmental and opportunistic pathogenic species. To estimate the cultivable fungal population, potato dextrose agar plate counts method was utilized. The internal transcribed spacer region-based iTag Illumina sequencing was employed to measure the community structure and fluctuation of the mycobiome over time in various locations. Treatment of samples with propidium monoazide (PMA; a DNA intercalating dye for selective detection of viable microbial populations) had a significant effect on the microbial diversity compared to non-PMA-treated samples. Statistical analysis confirmed that viable fungal community structure changed (increase in diversity and decrease in fungal burden) over the occupation time. Samples collected at day 20 showed distinct fungal profiles from samples collected at any other time point (before or after). Viable fungal families like Davidiellaceae, Teratosphaeriaceae, Pleosporales, and Pleosporaceae were shown to increase during the occupation time. The results of this study revealed that the overall fungal diversity in the closed habitat changed during human presence; therefore, it is crucial to properly maintain a closed habitat to preserve it from deteriorating and keep it safe for its inhabitants. Differences in community profiles were observed when statistically treated, especially of the mycobiome of samples collected at day 20. On a genus level Epiccocum, Alternaria, Pleosporales, Davidiella, and Cryptococcus showed increased abundance over the occupation time.

  16. A Longitudinal Assessment of Associations Between Women's Tendency to Pretend Orgasm, Orgasm Function, and Intercourse-Related Pain in Different Partner Relationship Constellations.

    PubMed

    Jern, Patrick; Hakala, Outi; Kärnä, Antti; Gunst, Annika

    2018-04-01

    The aim of the present study was to investigate how women's tendency to pretend orgasm during intercourse is associated with orgasm function and intercourse-related pain, using a longitudinal design where temporal stability and possible causal relationships could be modeled. The study sample consisted of 1421 Finnish women who had participated in large-scale population-based data collections conducted at two time points 7 years apart. Pretending orgasm was assessed for the past 4 weeks, and orgasm function and pain were assessed using the Female Sexual Function Index for the past 4 weeks. Associations were also computed separately in three groups of women based on relationship status. Pretending orgasm was considerably variable over time, with 34% of the women having pretended orgasm a few times or more at least at one time point, and 11% having done so at both time points. Initial bivariate correlations revealed associations between pretending orgasm and orgasm problems within and across time, whereas associations with pain were more ambiguous. However, we found no support in the path model for the leading hypotheses that pretending orgasms would predict pain or orgasm problems over a long period of time, or that pain or orgasm problems would predict pretending orgasm. The strongest predictor of future pretending in our model was previous pretending (R 2  = .14). Relationship status did not seem to affect pretending orgasm in any major way.

  17. Use of dew-point hygrometry, direct sweat collection, and measurement of body water losses to determine sweating rates in exercising horses.

    PubMed

    Kingston, J K; Geor, R J; McCutcheon, L J

    1997-02-01

    To compare dew-point hygrometry, direct sweat collection, and measurement of body water loss as methods for determination of sweating rate (SR) in exercising horses. 6 exercise-trained Thoroughbreds. SR was measured in 6 horses exercising at 40% of the speed that elicited maximum oxygen consumption for 45 km, with a 15-minute rest at the end of each 15-km phase. Each horse completed 2 exercise trials. Dew-point hygrometry, as a method of local SR determination, was validated in vitro by measurement of rate of evaporative water loss. During exercise, local SR was determined every 10 minutes by the following 2 methods: (1) dew-point hygrometry on the neck and lateral area of the thorax, and (2) on the basis of the volume of sweat collected from a sealed plastic pouch attached to the lateral area of the thorax. Mean whole body SR was calculated from total body water loss incurred during exercise. Evaporation rate measured by use of dew-point hygrometry was significantly correlated (r2 = 0.92) with the actual rate of evaporative water loss. There was a similar pattern of change in SR measured by dew-point hygrometry on the neck and lateral area of the thorax during exercise, with a significantly higher SR on the neck. The SR measured on the thorax by direct sweat collection and by dew-point hygrometry were of similar magnitude. Mean whole body SR calculated from total body water loss was not significantly different from mean whole body SR estimated from direct sweat collection or dew-point hygrometry measurements on the thorax. Dew-point hygrometry and direct sweat collection are useful methods for determination of local SR in horses during prolonged, steady-state exercise in moderate ambient conditions. Both methods of local SR determination provide an accurate estimated of whole body SR.

  18. Stability Subtypes of Callous-Unemotional Traits and Conduct Disorder Symptoms and Their Correlates.

    PubMed

    Eisenbarth, Hedwig; Demetriou, Chara A; Kyranides, Melina Nicole; Fanti, Kostas A

    2016-09-01

    Callous-unemotional traits and conduct disorder symptoms tend to co-occur across development, with existing evidence pointing to individual differences in the co-development of these problems. The current study identified groups of at risk adolescents showing stable (i.e., high on both conduct disorder and callous-unemotional symptoms, high only on either callous-unemotional or conduct disorder symptoms) or increasing conduct disorder and callous-unemotional symptoms. Data were collected from a sample of 2038 community adolescents between 15 and 18 years (1070 females, M age = 16) of age. A longitudinal design was followed in that adolescent reports were collected at two time points, 1 year apart. Increases in conduct disorder symptoms and callous-unemotional traits were accompanied by increases in anxiety, depressive symptoms, narcissism, proactive and reactive aggression and decreases in self-esteem. Furthermore, adolescents with high and stable conduct disorder symptoms and callous-unemotional traits were consistently at high risk for individual, behavioral and contextual problems. In contrast, youth high on callous-unemotional traits without conduct disorder symptoms remained at low-risk for anxiety, depressive symptoms, narcissism, and aggression, pointing to a potential protective function of pure callous-unemotional traits against the development of psychopathological problems.

  19. Plasma serotonin in horses undergoing surgery for small intestinal colic

    PubMed Central

    Torfs, Sara C.; Maes, An A.; Delesalle, Catherine J.; Pardon, Bart; Croubels, Siska M.; Deprez, Piet

    2015-01-01

    This study compared serotonin concentrations in platelet poor plasma (PPP) from healthy horses and horses with surgical small intestinal (SI) colic, and evaluated their association with postoperative ileus, strangulation and non-survival. Plasma samples (with EDTA) from 33 horses with surgical SI colic were collected at several pre- and post-operative time points. Serotonin concentrations were determined using liquid-chromatography tandem mass spectrometry. Results were compared with those for 24 healthy control animals. The serotonin concentrations in PPP were significantly lower (P < 0.01) in pre- and post-operative samples from surgical SI colic horses compared to controls. However, no association with postoperative ileus or non-survival could be demonstrated at any time point. In this clinical study, plasma serotonin was not a suitable prognostic factor in horses with SI surgical colic. PMID:25694668

  20. Creating a hyperpolarised pseudo singlet state through polarisation transfer from parahydrogen under SABRE.

    PubMed

    Olaru, Alexandra M; Roy, Soumya S; Lloyd, Lyrelle S; Coombes, Steven; Green, Gary G R; Duckett, Simon B

    2016-06-14

    The creation of magnetic states that have long lifetimes has been the subject of intense investigation, in part because of their potential to survive the time taken to travel from the point of injection in a patient to the point where a clinically diagnostic MRI trace is collected. We show here that it is possible to harness the signal amplification by reversible exchange (SABRE) process to create such states in a hyperpolarised form that improves their detectability in seconds without the need for any chemical change by reference to the model substrate 2-aminothiazole. We achieve this by transferring Zeeman derived polarisation that is 1500 times larger than that normally available at 400 MHz with greater than 90% efficiency into the new state, which in this case has a 27 second lifetime.

  1. Collective autonomy and absenteeism within work teams: a team motivation approach.

    PubMed

    Rousseau, Vincent; Aubé, Caroline

    2013-01-01

    This study investigates the role of collective autonomy in regard to team absenteeism by considering team potency as a motivational mediator and task routineness as a moderator. The sample consists of 90 work teams (327 members and 90 immediate superiors) drawn from a public safety organization. Results of structural equation modeling indicate that the relationships between collective autonomy and two indicators of team absenteeism (i.e., absence frequency and time lost) are mediated by team potency. Specifically, collective autonomy is positively related to team potency which in turn is negatively related to team absenteeism. Furthermore, results of hierarchical regression analyses show that task routineness moderates the relationships between collective autonomy and the two indicators of team absenteeism such that these relationships are stronger when the level of task routineness is low. On the whole, this study points out that collective autonomy may exercise a motivational effect on attendance at work within teams, but this effect is contingent on task routineness.

  2. Determinants of routine immunization costing in Benin and Ghana in 2011.

    PubMed

    Ahanhanzo, Césaire Damien; Huang, Xiao Xian; Le Gargasson, Jean-Bernard; Sossou, Justin; Nyonator, Frank; Colombini, Anais; Gessner, Bradford D

    2015-05-07

    Existing tools to evaluate costs do not always capture the heterogeneity of costs at the facility level. This study seeks to address this issue through an analysis of determinants of health facility immunization costs. A statistical analysis on facility routine delivery and vaccine costs was conducted using ordinary least squares regression. Explanatory variables included the number of doses administered; proportion of time spent by facility staff on immunization; average staff wage; whether the health facility had enough staff; presence of cold chain equipment; distance to a vaccine collection point; and, facility ownership. Data were drawn from representative samples of primary care facilities in Benin and Ghana (46 and 50 facilities, respectively) collected as part of the EPIC studies. Weighted average RI immunization facility cost was US$ 16,459 in Ghana and US$ 14,994 in Benin. The regression found total doses administered to be positively and significantly associated with facility cost in both countries. A 10% increase in doses resulted in a 4% increase in cost in Ghana, and a 7.5% increase in Benin. In Ghana, the proportion of immunization time, presence of cold chain, and sufficiency of staff were positively and significantly associated with total cost. In Benin, facility cost was negatively and significantly related to distance to the vaccine collection point. In the pooled sample, facilities in capital cities were associated with significantly higher costs. This study provides evidence on the importance of the level of scale in determining facility immunization cost, as well as the role of availability of health workers and time they spend on immunization in Ghana and Benin. This type of analysis can provide insights into the costs of scaling up immunization services, and can assist with development of more efficient immunization strategies. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Development of independent MU/treatment time verification algorithm for non-IMRT treatment planning: A clinical experience

    NASA Astrophysics Data System (ADS)

    Tatli, Hamza; Yucel, Derya; Yilmaz, Sercan; Fayda, Merdan

    2018-02-01

    The aim of this study is to develop an algorithm for independent MU/treatment time (TT) verification for non-IMRT treatment plans, as a part of QA program to ensure treatment delivery accuracy. Two radiotherapy delivery units and their treatment planning systems (TPS) were commissioned in Liv Hospital Radiation Medicine Center, Tbilisi, Georgia. Beam data were collected according to vendors' collection guidelines, and AAPM reports recommendations, and processed by Microsoft Excel during in-house algorithm development. The algorithm is designed and optimized for calculating SSD and SAD treatment plans, based on AAPM TG114 dose calculation recommendations, coded and embedded in MS Excel spreadsheet, as a preliminary verification algorithm (VA). Treatment verification plans were created by TPSs based on IAEA TRS 430 recommendations, also calculated by VA, and point measurements were collected by solid water phantom, and compared. Study showed that, in-house VA can be used for non-IMRT plans MU/TT verifications.

  4. Energy-Efficient Data Collection Method for Sensor Networks by Integrating Asymmetric Communication and Wake-Up Radio

    PubMed Central

    Iwata, Masanari; Tang, Suhua; Obana, Sadao

    2018-01-01

    In large-scale wireless sensor networks (WSNs), nodes close to sink nodes consume energy more quickly than other nodes due to packet forwarding. A mobile sink is a good solution to this issue, although it causes two new problems to nodes: (i) overhead of updating routing information; and (ii) increased operating time due to aperiodic query. To solve these problems, this paper proposes an energy-efficient data collection method, Sink-based Centralized transmission Scheduling (SC-Sched), by integrating asymmetric communication and wake-up radio. Specifically, each node is equipped with a low-power wake-up receiver. The sink node determines transmission scheduling, and transmits a wake-up message using a large transmission power, directly activating a pair of nodes simultaneously which will communicate with a normal transmission power. This paper further investigates how to deal with frame loss caused by fading and how to mitigate the impact of the wake-up latency of communication modules. Simulation evaluations confirm that using multiple channels effectively reduces data collection time and SC-Sched works well with a mobile sink. Compared with the conventional duty-cycling method, SC-Sched greatly reduces total energy consumption and improves the network lifetime by 7.47 times in a WSN with 4 data collection points and 300 sensor nodes. PMID:29642397

  5. Examining perceived stigma of children with newly-diagnosed epilepsy and their caregivers over a two-year period.

    PubMed

    Rood, Jennifer E; Schultz, Janet R; Rausch, Joseph R; Modi, Avani C

    2014-10-01

    The purpose of this study was to examine the following: 1) the course of perceived epilepsy-related stigma among children newly diagnosed with epilepsy (n=39) and their caregivers (n=97) over a two-year period, 2) the influence of seizure absence/presence on children and caregivers' perception of epilepsy-related stigma, and 3) the congruence of child and caregiver perception of child epilepsy-related stigma. Participants completed a measure of perceived epilepsy-related stigma at three time points, and seizure status was collected at the final time point. Results indicated that both caregivers (t(1,76)=-2.57, p<.01) and children with epilepsy (t(1,29)=-3.37, p<.01) reported decreasing epilepsy-related stigma from diagnosis to two years postdiagnosis. No significant differences were found in caregiver and child reports of perceived stigma for children experiencing seizures compared with children who have been seizure-free for the past year. Results revealed poor caregiver-child agreement of perceived epilepsy-related stigma at all three time points. These data suggest that while children with epilepsy initially perceive epilepsy-related stigma at diagnosis, their perception of stigma decreases over time. Having a better understanding of the course of epilepsy-related stigma provides clinicians with information regarding critical times to support families with stigma reduction interventions. Copyright © 2014 Elsevier Inc. All rights reserved.

  6. Examining Perceived Stigma of Children with Newly-Diagnosed Epilepsy and Their Caregivers Over a Two Year Period

    PubMed Central

    Rood, Jennifer E.; Schultz, Janet R.; Rausch, Joseph R.; Modi, Avani C.

    2014-01-01

    The purpose of this study was to examine: 1) the course of perceived epilepsy-related stigma among children newly-diagnosed with epilepsy (n=39) and their caregivers (n=97) over a two year period, 2) the influence of seizure absence/presence on children and caregivers’ perception of epilepsy-related stigma, and 3) congruence of child and caregiver perception of child epilepsy-related stigma. Participants completed a measure of perceived epilepsy-related stigma at three time points, and seizure status was collected at the final time point. Results indicated both caregivers (t1,76 = − 2.57 p< .01) and children with epilepsy (t1,29=−3.37, p< .01) reported decreasing epilepsy-related stigma from diagnosis to two years post-diagnosis. No significant differences were found in caregiver and child report of perceived stigma for children experiencing seizures as compared to children who have been seizure-free for the past year. Results revealed poor caregiver-child agreement of perceived epilepsy-related stigma at all three time points. These data suggest that while children with epilepsy initially perceive epilepsy-related stigma at diagnosis, their perception of stigma decreases over time. Having a better understanding of the course of epilepsy-related stigma provides clinicians with information regarding critical times to support families with stigma reduction interventions. PMID:25173098

  7. Metrics for More than Two Points at Once

    NASA Technical Reports Server (NTRS)

    Wolpert, David H.

    2005-01-01

    The conventional definition of a topological metric over a space specifies properties that must be obeyed by any measure of "how separated" two points in that space are. Here it is shown how to extend that definition, and in particular the triangle inequality, to concern arbitrary numbers of points. Such a measure of how separated the points within a collection are can be bootstrapped, to measure "how separated" from each other are two (or more) collections. The measure presented here also allows fractional membership of an element in a collection. This means it directly concerns measures of "how spread out" a probability distribution over a space is. When such a measure is bootstrapped to compare two collections, it allows us to measure how separated two probability distributions are, or more generally, how separated a distribution of distributions is.

  8. Epidemiology of alcohol and other drug use among motor vehicle crash victims admitted to a trauma center.

    PubMed

    Walsh, J Michael; Flegel, Ron; Cangianelli, Leo A; Atkins, Randolph; Soderstrom, Carl A; Kerns, Timothy J

    2004-09-01

    The objectives of this research were to (1) determine the incidence and prevalence of alcohol and other drug use among motor vehicle crash (MVC) victims admitted to a regional Level-I trauma center, and (2) to examine the utility of using a rapid point-of-collection (POC) drug-testing device to identify MVC patients with drug involvement. Blood and urine specimens were routinely collected per clinical protocol for each MVC victim at the time of admission. Blood alcohol concentration (BAC) levels were determined per standard clinical protocol. Clinical urine specimens were routinely split so that a POC drug-testing device for the detection of commonly abused drugs (Marijuana, Cocaine, Amphetamines, Methamphetamines, and Opiates) could be compared to that of the standard hospital laboratory analysis of each urine specimen (which also included Barbiturates and Benzodiazepines). In the six-month period of this study, nearly two-thirds of trauma center admissions were victims of motor vehicle crashes. During this time, blood and urine was collected from 322 MVC victims. Toxicology results indicated that 59.3% of MVC victims tested positive for either commonly abused drugs or alcohol. More patients tested positive for drug use than tested positive for alcohol, with 33.5% testing positive for drug use only, 15.8% testing positive for alcohol use only, and 9.9% testing positive for both drugs and alcohol. Less than half (45.2%) of the substance-abusing patients in this study would have been identified by an alcohol test alone. After alcohol, marijuana and benzodiazepines were the most frequently detected drugs. Point of collection (POC) test results correlated well with laboratory results and provide important information to initiate rapid intervention/treatment for substance use problems among injured patients.

  9. Development and Validation of a UAV Based System for Air Pollution Measurements

    PubMed Central

    Villa, Tommaso Francesco; Salimi, Farhad; Morton, Kye; Morawska, Lidia; Gonzalez, Felipe

    2016-01-01

    Air quality data collection near pollution sources is difficult, particularly when sites are complex, have physical barriers, or are themselves moving. Small Unmanned Aerial Vehicles (UAVs) offer new approaches to air pollution and atmospheric studies. However, there are a number of critical design decisions which need to be made to enable representative data collection, in particular the location of the air sampler or air sensor intake. The aim of this research was to establish the best mounting point for four gas sensors and a Particle Number Concentration (PNC) monitor, onboard a hexacopter, so to develop a UAV system capable of measuring point source emissions. The research included two different tests: (1) evaluate the air flow behavior of a hexacopter, its downwash and upwash effect, by measuring air speed along three axes to determine the location where the sensors should be mounted; (2) evaluate the use of gas sensors for CO2, CO, NO2 and NO, and the PNC monitor (DISCmini) to assess the efficiency and performance of the UAV based system by measuring emissions from a diesel engine. The air speed behavior map produced by test 1 shows the best mounting point for the sensors to be alongside the UAV. This position is less affected by the propeller downwash effect. Test 2 results demonstrated that the UAV propellers cause a dispersion effect shown by the decrease of gas and PN concentration measured in real time. A Linear Regression model was used to estimate how the sensor position, relative to the UAV center, affects pollutant concentration measurements when the propellers are turned on. This research establishes guidelines on how to develop a UAV system to measure point source emissions. Such research should be undertaken before any UAV system is developed for real world data collection. PMID:28009820

  10. Development and Validation of a UAV Based System for Air Pollution Measurements.

    PubMed

    Villa, Tommaso Francesco; Salimi, Farhad; Morton, Kye; Morawska, Lidia; Gonzalez, Felipe

    2016-12-21

    Air quality data collection near pollution sources is difficult, particularly when sites are complex, have physical barriers, or are themselves moving. Small Unmanned Aerial Vehicles (UAVs) offer new approaches to air pollution and atmospheric studies. However, there are a number of critical design decisions which need to be made to enable representative data collection, in particular the location of the air sampler or air sensor intake. The aim of this research was to establish the best mounting point for four gas sensors and a Particle Number Concentration (PNC) monitor, onboard a hexacopter, so to develop a UAV system capable of measuring point source emissions. The research included two different tests: (1) evaluate the air flow behavior of a hexacopter, its downwash and upwash effect, by measuring air speed along three axes to determine the location where the sensors should be mounted; (2) evaluate the use of gas sensors for CO₂, CO, NO₂ and NO, and the PNC monitor (DISCmini) to assess the efficiency and performance of the UAV based system by measuring emissions from a diesel engine. The air speed behavior map produced by test 1 shows the best mounting point for the sensors to be alongside the UAV. This position is less affected by the propeller downwash effect. Test 2 results demonstrated that the UAV propellers cause a dispersion effect shown by the decrease of gas and PN concentration measured in real time. A Linear Regression model was used to estimate how the sensor position, relative to the UAV center, affects pollutant concentration measurements when the propellers are turned on. This research establishes guidelines on how to develop a UAV system to measure point source emissions. Such research should be undertaken before any UAV system is developed for real world data collection.

  11. Variability of residue concentrations of ciprofloxacin in honey from treated hives.

    PubMed

    Chan, Danny; Macarthur, Roy; Fussell, Richard J; Wilford, Jack; Budge, Giles

    2017-04-01

    Honey bees (Apis mellifera L.) were treated with a model veterinary drug compound (ciprofloxacin) in a 3-year study (2012-14) to investigate the variability of residue concentration in honey. Sucrose solution containing ciprofloxacin was administered to 45 hives (1 g of ciprofloxacin per hive) at the beginning of the honey flow in late May/mid-June 2012, 2013 and 2014. Buckfast honey bees (A. mellifera - hybrid) were used in years 2012 and 2013. Carniolan honey bees (A. mellifera carnica) were used instead of the Buckfast honey bees as a replacement due to unforeseen circumstances in the final year of the study (2014). Honey was collected over nine scheduled time points from May/June till late October each year. Up to five hives were removed and their honey analysed per time point. Honey samples were analysed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) to determine ciprofloxacin concentration. Statistical assessment of the data shows that the inter-hive variation of ciprofloxacin concentrations in 2012/13 is very different compared with that of 2014 with relative standard deviations (RSDs) of 138% and 61%, respectively. The average ciprofloxacin concentration for 2014 at the last time point was more than 10 times the concentration compared with samples from 2012/13 at the same time point. The difference between the 2012/13 data compared with the 2014 data is likely due to the different type of honey bees used in this study (2012/13 Buckfast versus 2014 Carniolan). Uncertainty estimates for honey with high ciprofloxacin concentration (upper 95th percentile) across all hives for 55-day withdrawal samples gave residual standard errors (RSEs) of 22%, 20% and 11% for 2012, 2013 and 2014, respectively. If the number of hives were to be reduced for future studies, RSEs were estimated to be 52% (2012), 54% (2013) and 26% (2014) for one hive per time point (nine total hives).

  12. Influencing Gameplay in Support of Early Synthetic Prototyping Studies

    DTIC Science & Technology

    2016-06-01

    Synthetic Prototyping, acquisition, video games, crowdsourcing, Engineering Resilient Systems, science and technology, game environment 15. NUMBER OF...even though he did not play video games for entertainment, he would find time to participate in ESP (Vogt, Megiveron, & Smith, 2015). Meckler’s...reward used in video games: 1) score systems, 2) experience points, 3) item granting, 4) collectible resources, 5) achievement systems, 6) feedback

  13. An Analysis of Bullying among Students within Schools: Estimating the Effects of Individual Normative Beliefs, Self-Esteem, and School Climate

    ERIC Educational Resources Information Center

    Gendron, Brian P.; Williams, Kirk R.; Guerra, Nancy G.

    2011-01-01

    The current study examined the relations among self-esteem, approving normative beliefs about bullying, school climate, and bullying perpetration using a large, longitudinal sample of children from elementary, middle, and high school. Self-report surveys were collected at two points in time over the course of 1 year from 7,299 ethnically diverse…

  14. Investigation of thermally activated deformation in amorphous PMMA and Zr-Cu-Al bulk metallic glasses with broadband nanoindentation creep

    Treesearch

    J.B. Puthoff; J.E. Jakes; H. Cao; D.S. Stone

    2009-01-01

    The development of nanoindentation test systems with high data collection speeds has made possible a novel type of indentation creep test: broadband nanoindentation creep (BNC). Using the high density of data points generated and analysis techniques that can model the instantaneous projected indent area at all times during a constant-load indentation experiment, BNC...

  15. A Comparison of Three IRT Approaches to Examinee Ability Change Modeling in a Single-Group Anchor Test Design

    ERIC Educational Resources Information Center

    Paek, Insu; Park, Hyun-Jeong; Cai, Li; Chi, Eunlim

    2014-01-01

    Typically a longitudinal growth modeling based on item response theory (IRT) requires repeated measures data from a single group with the same test design. If operational or item exposure problems are present, the same test may not be employed to collect data for longitudinal analyses and tests at multiple time points are constructed with unique…

  16. Test-Retest Reliability of the Short-Form Survivor Unmet Needs Survey.

    PubMed

    Taylor, Karen; Bulsara, Max; Monterosso, Leanne

    2018-01-01

    Reliable and valid needs assessment measures are important assessment tools in cancer survivorship care. A new 30-item short-form version of the Survivor Unmet Needs Survey (SF-SUNS) was developed and validated with cancer survivors, including hematology cancer survivors; however, test-retest reliability has not been established. The objective of this study was to assess the test-retest reliability of the SF-SUNS with a cohort of lymphoma survivors ( n = 40). Test-retest reliability of the SF-SUNS was conducted at two time points: baseline (time 1) and 5 days later (time 2). Test-retest data were collected from lymphoma cancer survivors ( n = 40) in a large tertiary cancer center in Western Australia. Intraclass correlation analyses compared data at time 1 (baseline) and time 2 (5 days later). Cronbach's alpha analyses were performed to assess the internal consistency at both time points. The majority (23/30, 77%) of items achieved test-retest reliability scores 0.45-0.74 (fair to good). A high degree of overall internal consistency was demonstrated (time 1 = 0.92, time 2 = 0.95), with scores 0.65-0.94 across subscales for both time points. Mixed test-retest reliability of the SF-SUNS was established. Our results indicate the SF-SUNS is responsive to the changing needs of lymphoma cancer survivors. Routine use of cancer survivorship specific needs-based assessments is required in oncology care today. Nurses are well placed to administer these assessments and provide tailored information and resources. Further assessment of test-retest reliability in hematology and other cancer cohorts is warranted.

  17. An amino acid-electrolyte beverage may increase cellular rehydration relative to carbohydrate-electrolyte and flavored water beverages.

    PubMed

    Tai, Chih-Yin; Joy, Jordan M; Falcone, Paul H; Carson, Laura R; Mosman, Matt M; Straight, Justen L; Oury, Susie L; Mendez, Carlos; Loveridge, Nick J; Kim, Michael P; Moon, Jordan R

    2014-05-26

    In cases of dehydration exceeding a 2% loss of body weight, athletic performance can be significantly compromised. Carbohydrate and/or electrolyte containing beverages have been effective for rehydration and recovery of performance, yet amino acid containing beverages remain unexamined. Therefore, the purpose of this study is to compare the rehydration capabilities of an electrolyte-carbohydrate (EC), electrolyte-branched chain amino acid (EA), and flavored water (FW) beverages. Twenty men (n = 10; 26.7 ± 4.8 years; 174.3 ± 6.4 cm; 74.2 ± 10.9 kg) and women (n = 10; 27.1 ± 4.7 years; 175.3 ± 7.9 cm; 71.0 ± 6.5 kg) participated in this crossover study. For each trial, subjects were dehydrated, provided one of three random beverages, and monitored for the following three hours. Measurements were collected prior to and immediately after dehydration and 4 hours after dehydration (3 hours after rehydration) (AE = -2.5 ± 0.55%; CE = -2.2 ± 0.43%; FW = -2.5 ± 0.62%). Measurements collected at each time point were urine volume, urine specific gravity, drink volume, and fluid retention. No significant differences (p > 0.05) existed between beverages for urine volume, drink volume, or fluid retention for any time-point. Treatment x time interactions existed for urine specific gravity (USG) (p < 0.05). Post hoc analysis revealed differences occurred between the FW and EA beverages (p = 0.003) and between the EC and EA beverages (p = 0.007) at 4 hours after rehydration. Wherein, EA USG returned to baseline at 4 hours post-dehydration (mean difference from pre to 4 hours post-dehydration = -0.0002; p > 0.05) while both EC (-0.0067) and FW (-0.0051) continued to produce dilute urine and failed to return to baseline at the same time-point (p < 0.05). Because no differences existed for fluid retention, urine or drink volume at any time point, yet USG returned to baseline during the EA trial, an EA supplement may enhance cellular rehydration rate compared to an EC or FW beverage in healthy men and women after acute dehydration of around 2% body mass loss.

  18. A comparison of thermal infrared to fiber-optic distributed temperature sensing for evaluation of groundwater discharge to surface water

    NASA Astrophysics Data System (ADS)

    Hare, Danielle K.; Briggs, Martin A.; Rosenberry, Donald O.; Boutt, David F.; Lane, John W.

    2015-11-01

    Groundwater has a predictable thermal signature that can be used to locate discrete zones of discharge to surface water. As climate warms, surface water with strong groundwater influence will provide habitat stability and refuge for thermally stressed aquatic species, and is therefore critical to locate and protect. Alternatively, these discrete seepage locations may serve as potential point sources of contaminants from polluted aquifers. This study compares two increasingly common heat tracing methods to locate discrete groundwater discharge: direct-contact measurements made with fiber-optic distributed temperature sensing (FO-DTS) and remote sensing measurements collected with thermal infrared (TIR) cameras. FO-DTS is used to make high spatial resolution (typically m) thermal measurements through time within the water column using temperature-sensitive cables. The spatial-temporal data can be analyzed with statistical measures to reveal zones of groundwater influence, however, the personnel requirements, time to install, and time to georeference the cables can be burdensome, and the control units need constant calibration. In contrast, TIR data collection, either from handheld, airborne, or satellite platforms, can quickly capture point-in-time evaluations of groundwater seepage zones across large scales. However the remote nature of TIR measurements means they can be adversely influenced by a number of environmental and physical factors, and the measurements are limited to the surface ;skin; temperature of water features. We present case studies from a range of lentic to lotic aquatic systems to identify capabilities and limitations of both technologies and highlight situations in which one or the other might be a better instrument choice for locating groundwater discharge. FO-DTS performs well in all systems across seasons, but data collection was limited spatially by practical considerations of cable installation. TIR is found to consistently locate groundwater seepage zones above and along the streambank, but submerged seepage zones are only well identified in shallow systems (e.g. <0.5 m depth) with moderate flow. Winter data collection, when groundwater is relatively warm and buoyant, increases the water surface expression of discharge zones in shallow systems.

  19. Leveraging North Carolina's QL2 Lidar to Quantify Sensitivity of National Water Model Derived Flood Inundation Extent to DEM Resolution

    NASA Astrophysics Data System (ADS)

    Lovette, J. P.; Lenhardt, W. C.; Blanton, B.; Duncan, J. M.; Stillwell, L.

    2017-12-01

    The National Water Model (NWM) has provided a novel framework for near real time flood inundation mapping across CONUS at a 10m resolution. In many regions, this spatial scale is quickly being surpassed through the collection of high resolution lidar (1 - 3m). As one of the leading states in data collection for flood inundation mapping, North Carolina is currently improving their previously available 20 ft statewide elevation product to a Quality Level 2 (QL2) product with a nominal point spacing of 0.7 meters. This QL2 elevation product increases the ground points by roughly ten times over the previous statewide lidar product, and by over 250 times when compared to the 10m NED elevation grid. When combining these new lidar data with the discharge estimates from the NWM, we can further improve statewide flood inundation maps and predictions of at-risk areas. In the context of flood risk management, these improved predictions with higher resolution elevation models consistently represent an improvement on coarser products. Additionally, the QL2 lidar also includes coarse land cover classification data for each point return, opening the possibility for expanding analysis beyond the use of only digital elevation models (e.g. improving estimates of surface roughness, identifying anthropogenic features in floodplains, characterizing riparian zones, etc.). Using the NWM Height Above Nearest Drainage approach, we compare flood inundation extents derived from multiple lidar-derived grid resolutions to assess the tradeoff between precision and computational load in North Carolina's coastal river basins. The elevation data distributed through the state's new lidar collection program provide spatial resolutions ranging from 5-50 feet, with most inland areas also including a 3 ft product. Data storage increases by almost two orders of magnitude across this range, as does processing load. In order to further assess the validity of the higher resolution elevation products on flood inundation, we examine the NWM outputs from Hurricane Matthew, which devastated southeastern North Carolina in October 2016. When compared with numerous surveyed high water marks across the coastal plain, this assessment provides insight on the impacts of grid resolution on flood inundation extent.

  20. Modeling an enhanced ridesharing system with meet points and time windows

    PubMed Central

    Li, Xin; Hu, Sangen; Deng, Kai

    2018-01-01

    With the rising of e-hailing services in urban areas, ride sharing is becoming a common mode of transportation. This paper presents a mathematical model to design an enhanced ridesharing system with meet points and users’ preferable time windows. The introduction of meet points allows ridesharing operators to trade off the benefits of saving en-route delays and the cost of additional walking for some passengers to be collectively picked up or dropped off. This extension to the traditional door-to-door ridesharing problem brings more operation flexibility in urban areas (where potential requests may be densely distributed in neighborhood), and thus could achieve better system performance in terms of reducing the total travel time and increasing the served passengers. We design and implement a Tabu-based meta-heuristic algorithm to solve the proposed mixed integer linear program (MILP). To evaluate the validation and effectiveness of the proposed model and solution algorithm, several scenarios are designed and also resolved to optimality by CPLEX. Results demonstrate that (i) detailed route plan associated with passenger assignment to meet points can be obtained with en-route delay savings; (ii) as compared to CPLEX, the meta-heuristic algorithm bears the advantage of higher computation efficiency and produces good quality solutions with 8%~15% difference from the global optima; and (iii) introducing meet points to ridesharing system saves the total travel time by 2.7%-3.8% for small-scale ridesharing systems. More benefits are expected for ridesharing systems with large size of fleet. This study provides a new tool to efficiently operate the ridesharing system, particularly when the ride sharing vehicles are in short supply during peak hours. Traffic congestion mitigation will also be expected. PMID:29715302

  1. Real-Time Wireless Data Acquisition System

    NASA Technical Reports Server (NTRS)

    Valencia, Emilio J.; Perotti, Jose; Lucena, Angel; Mata, Carlos

    2007-01-01

    Current and future aerospace requirements demand the creation of a new breed of sensing devices, with emphasis on reduced weight, power consumption, and physical size. This new generation of sensors must possess a high degree of intelligence to provide critical data efficiently and in real-time. Intelligence will include self-calibration, self-health assessment, and pre-processing of raw data at the sensor level. Most of these features are already incorporated in the Wireless Sensors Network (SensorNet(TradeMark)), developed by the Instrumentation Group at Kennedy Space Center (KSC). A system based on the SensorNet(TradeMark) architecture consists of data collection point(s) called Central Stations (CS) and intelligent sensors called Remote Stations (RS) where one or more CSs can be accommodated depending on the specific application. The CS's major function is to establish communications with the Remote Stations and to poll each RS for data and health information. The CS also collects, stores and distributes these data to the appropriate systems requiring the information. The system has the ability to perform point-to-point, multi-point and relay mode communications with an autonomous self-diagnosis of each communications link. Upon detection of a communication failure, the system automatically reconfigures to establish new communication paths. These communication paths are automatically and autonomously selected as the best paths by the system based on the existing operating environment. The data acquisition system currently under development at KSC consists of the SensorNet(TradeMark) wireless sensors as the remote stations and the central station called the Radio Frequency Health Node (RFHN). The RFF1N is the central station which remotely communicates with the SensorNet(TradeMark) sensors to control them and to receive data. The system's salient feature is the ability to provide deterministic sensor data with accurate time stamps for both time critical and non-time critical applications. Current wireless standards such as Zigbee(TradeMark) and Bluetooth(Registered TradeMark) do not have these capabilities and can not meet the needs that are provided by the SensorNet technology. Additionally, the system has the ability to automatically reconfigure the wireless communication link to a secondary frequency if interference is encountered and can autonomously search for a sensor that was perceived to be lost using the relay capabilities of the sensors and the secondary frequency. The RFHN and the SensorNet designs are based on modular architectures that allow for future increases in capability and the ability to expand or upgrade with relative ease. The RFHN and SensorNet sensors .can also perform data processing which forms a distributed processing architecture allowing the system to pass along information rather than just sending "raw data points" to the next higher level system. With a relatively small size, weight and power consumption, this system has the potential for both spacecraft and aircraft applications as well as ground applications that require time critical data.

  2. Damage diagnosis algorithm using a sequential change point detection method with an unknown distribution for damage

    NASA Astrophysics Data System (ADS)

    Noh, Hae Young; Rajagopal, Ram; Kiremidjian, Anne S.

    2012-04-01

    This paper introduces a damage diagnosis algorithm for civil structures that uses a sequential change point detection method for the cases where the post-damage feature distribution is unknown a priori. This algorithm extracts features from structural vibration data using time-series analysis and then declares damage using the change point detection method. The change point detection method asymptotically minimizes detection delay for a given false alarm rate. The conventional method uses the known pre- and post-damage feature distributions to perform a sequential hypothesis test. In practice, however, the post-damage distribution is unlikely to be known a priori. Therefore, our algorithm estimates and updates this distribution as data are collected using the maximum likelihood and the Bayesian methods. We also applied an approximate method to reduce the computation load and memory requirement associated with the estimation. The algorithm is validated using multiple sets of simulated data and a set of experimental data collected from a four-story steel special moment-resisting frame. Our algorithm was able to estimate the post-damage distribution consistently and resulted in detection delays only a few seconds longer than the delays from the conventional method that assumes we know the post-damage feature distribution. We confirmed that the Bayesian method is particularly efficient in declaring damage with minimal memory requirement, but the maximum likelihood method provides an insightful heuristic approach.

  3. Evaluation of process errors in bed load sampling using a Dune Model

    USGS Publications Warehouse

    Gomez, Basil; Troutman, Brent M.

    1997-01-01

    Reliable estimates of the streamwide bed load discharge obtained using sampling devices are dependent upon good at-a-point knowledge across the full width of the channel. Using field data and information derived from a model that describes the geometric features of a dune train in terms of a spatial process observed at a fixed point in time, we show that sampling errors decrease as the number of samples collected increases, and the number of traverses of the channel over which the samples are collected increases. It also is preferable that bed load sampling be conducted at a pace which allows a number of bed forms to pass through the sampling cross section. The situations we analyze and simulate pertain to moderate transport conditions in small rivers. In such circumstances, bed load sampling schemes typically should involve four or five traverses of a river, and the collection of 20–40 samples at a rate of five or six samples per hour. By ensuring that spatial and temporal variability in the transport process is accounted for, such a sampling design reduces both random and systematic errors and hence minimizes the total error involved in the sampling process.

  4. A Statewide Private Microwave Wide Area Network for Real-time Natural Hazard Monitoring

    NASA Astrophysics Data System (ADS)

    Williams, M. C.; Kent, G.; Smith, K. D.; Plank, G.; Slater, D.; Torrisi, J.; Presser, R.; Straley, K.

    2013-12-01

    The Nevada Seismological Laboratory (NSL) at the University of Nevada, Reno, operates the Nevada Seismic Network, a collection of ground motion instruments installed throughout Nevada and California, for the purposes of detecting, locating, and notifying the public of earthquakes in the state. To perform these tasks effectively, NSL has designed and built a statewide wireless microwave wide-area network (WAN) in order to receive ground motion data in near real-time. This network consists of radio access points, backhauls, and backbone communication sites transmitting time-series, images, and datalogger diagnostics to our data center servers in Reno. This privately managed communication network greatly reduces the dependence on third-party infrastructure (e.g. commercial cellular networks), and is vital for emergency management response and system uptime. Any individual seismograph or data collection device is networked through a wireless point-to-multipoint connection to a remote access point (AP) using a low-cost radio/routerboard combination. Additional point-to-point connections from AP's to radio backhauls and/or mountaintop backbone sites allow the Data Center in Reno to communicate with and receive data directly from each datalogger. Dataloggers, radios, and routers can be configured using tablets on-site, or via desktop computers at the Data Center. Redundant mountaintop links can be added to the network and facilitate the re-routing of data (similar to a meshed network) in the event of a faulty, failing, or noisy communication site. All routers, radios, and servers, including those at the Data Center, have redundant power and can operate independently in the event of a grid power or public Internet outage. A managed server room at the Data Center processes earthquake data for notifications and acts as a data source for remote users. Consisting of about 500 hosts, and spanning hundreds of miles, this WAN provides network operators access to each router and datalogger in our seismic network not only for data collection, but also for maintenance and quality control. This has resulted in several partnerships with other agencies. In addition to our seismic station network for earthquake monitoring, we currently manage ~400 more channels of data (many running at 500 Hz) for the National Center for Nuclear Security (NCNS) Source Physics Experiments, a series of chemical explosions at the Nevada National Security Site. Some of our mountaintop stations have been experimentally equipped with near-infrared high-definition fire cameras for wildfire monitoring, and have recently recorded the Bison and Pedlar fires in northwest Nevada. Data for the Nevada EPSCor climate program also utilizes the NSL WAN. Real-time access to data for these experiments greatly reduces the effort required for data archival, quality control, and monitoring equipment failures. Future plans include increasing density of stations in urban areas such as Reno and Las Vegas, and expanding coverage to Tahoe and eastern Nevada.

  5. Effect of target color and scanning geometry on terrestrial LiDAR point-cloud noise and plane fitting

    NASA Astrophysics Data System (ADS)

    Bolkas, Dimitrios; Martinez, Aaron

    2018-01-01

    Point-cloud coordinate information derived from terrestrial Light Detection And Ranging (LiDAR) is important for several applications in surveying and civil engineering. Plane fitting and segmentation of target-surfaces is an important step in several applications such as in the monitoring of structures. Reliable parametric modeling and segmentation relies on the underlying quality of the point-cloud. Therefore, understanding how point-cloud errors affect fitting of planes and segmentation is important. Point-cloud intensity, which accompanies the point-cloud data, often goes hand-in-hand with point-cloud noise. This study uses industrial particle boards painted with eight different colors (black, white, grey, red, green, blue, brown, and yellow) and two different sheens (flat and semi-gloss) to explore how noise and plane residuals vary with scanning geometry (i.e., distance and incidence angle) and target-color. Results show that darker colors, such as black and brown, can produce point clouds that are several times noisier than bright targets, such as white. In addition, semi-gloss targets manage to reduce noise in dark targets by about 2-3 times. The study of plane residuals with scanning geometry reveals that, in many of the cases tested, residuals decrease with increasing incidence angles, which can assist in understanding the distribution of plane residuals in a dataset. Finally, a scheme is developed to derive survey guidelines based on the data collected in this experiment. Three examples demonstrate that users should consider instrument specification, required precision of plane residuals, required point-spacing, target-color, and target-sheen, when selecting scanning locations. Outcomes of this study can aid users to select appropriate instrumentation and improve planning of terrestrial LiDAR data-acquisition.

  6. Antenna Controller Replacement Software

    NASA Technical Reports Server (NTRS)

    Chao, Roger Y.; Morgan, Scott C.; Strain, Martha M.; Rockwell, Stephen T.; Shimizu, Kenneth J.; Tehrani, Barzia J.; Kwok, Jaclyn H.; Tuazon-Wong, Michelle; Valtier, Henry; Nalbandi, Reza; hide

    2010-01-01

    The Antenna Controller Replacement (ACR) software accurately points and monitors the Deep Space Network (DSN) 70-m and 34-m high-efficiency (HEF) ground-based antennas that are used to track primarily spacecraft and, periodically, celestial targets. To track a spacecraft, or other targets, the antenna must be accurately pointed at the spacecraft, which can be very far away with very weak signals. ACR s conical scanning capability collects the signal in a circular pattern around the target, calculates the location of the strongest signal, and adjusts the antenna pointing to point directly at the spacecraft. A real-time, closed-loop servo control algorithm performed every 0.02 second allows accurate positioning of the antenna in order to track these distant spacecraft. Additionally, this advanced servo control algorithm provides better antenna pointing performance in windy conditions. The ACR software provides high-level commands that provide a very easy user interface for the DSN operator. The operator only needs to enter two commands to start the antenna and subreflector, and Master Equatorial tracking. The most accurate antenna pointing is accomplished by aligning the antenna to the Master Equatorial, which because of its small size and sheltered location, has the most stable pointing. The antenna has hundreds of digital and analog monitor points. The ACR software provides compact displays to summarize the status of the antenna, subreflector, and the Master Equatorial. The ACR software has two major functions. First, it performs all of the steps required to accurately point the antenna (and subreflector and Master Equatorial) at the spacecraft (or celestial target). This involves controlling the antenna/ subreflector/Master-Equatorial hardware, initiating and monitoring the correct sequence of operations, calculating the position of the spacecraft relative to the antenna, executing the real-time servo control algorithm to maintain the correct position, and monitoring tracking performance.

  7. Rapid, decimeter-resolution fault zone topography mapped with Structure from Motion

    NASA Astrophysics Data System (ADS)

    Johnson, K. L.; Nissen, E.; Saripalli, S.; Arrowsmith, R.; McGarey, P.; Scharer, K. M.; Williams, P. L.

    2013-12-01

    Recent advances in the generation of high-resolution topography have revolutionized our ability to detect subtle geomorphic features related to ground-rupturing earthquakes. Currently, the most popular topographic mapping methods are airborne Light Detection And Ranging (LiDAR) and terrestrial laser scanning (TLS). Though powerful, these laser scanning methods have some inherent drawbacks: airborne LiDAR is expensive and can be logistically complicated, while TLS is time consuming even for small field sites and suffers from patchy coverage due to its restricted field-of-view. An alternative mapping technique, called Structure from Motion (SfM), builds upon traditional photogrammetry to reproduce the topography and texture of a scene from photographs taken at varying viewpoints. The improved availability of cheap, unmanned aerial vehicles (UAVs) as camera platforms further expedites data collection by covering large areas efficiently with optimal camera angles. Here, we introduce a simple and affordable UAV- or balloon-based SfM mapping system which can produce dense point clouds and sub-decimeter resolution digital elevation models (DEMs) registered to geospatial coordinates using either the photograph's GPS tags or a few ground control points across the scene. The system is ideally suited for studying ruptures of prehistoric, historic, and modern earthquakes in areas of sparse or low-lying vegetation. We use two sites from southern California faults to illustrate. The first is the ~0.1 km2 Washington Street site, located on the Banning strand of the San Andreas fault near Thousand Palms. A high-resolution DEM with ~700 point/m2 was produced from 230 photos collected on a balloon platform flying at 50 m above the ground. The second site is the Galway Lake Road site, which spans a ~1 km strip of the 1992 Mw 7.3 Landers earthquake on the Emerson Fault. The 100 point/m2 DEM was produced from 267 photos taken with a balloon platform at a height of 60 m above the ground. We compare our SfM results to existing airborne LiDAR or TLS datasets. Each SfM survey required less than 2 hours for setup and data collection, an allotment much lower than that required for TLS data collection, given the size of the sites. Processing time is somewhat slower, but depends on the quality of the DEM desired and is almost fully automated. The SfM point cloud densities we present are comparable to TLS but exceed the density of most airborne LiDAR and the orthophotos (texture maps) from the SfM are valuable complements to the DEMs. The SfM topography illuminates features along the faults that can be used to measure offsets from past ruptures, offering the potential to enhance regional seismic hazard analyses.

  8. lidar change detection using building models

    NASA Astrophysics Data System (ADS)

    Kim, Angela M.; Runyon, Scott C.; Jalobeanu, Andre; Esterline, Chelsea H.; Kruse, Fred A.

    2014-06-01

    Terrestrial LiDAR scans of building models collected with a FARO Focus3D and a RIEGL VZ-400 were used to investigate point-to-point and model-to-model LiDAR change detection. LiDAR data were scaled, decimated, and georegistered to mimic real world airborne collects. Two physical building models were used to explore various aspects of the change detection process. The first model was a 1:250-scale representation of the Naval Postgraduate School campus in Monterey, CA, constructed from Lego blocks and scanned in a laboratory setting using both the FARO and RIEGL. The second model at 1:8-scale consisted of large cardboard boxes placed outdoors and scanned from rooftops of adjacent buildings using the RIEGL. A point-to-point change detection scheme was applied directly to the point-cloud datasets. In the model-to-model change detection scheme, changes were detected by comparing Digital Surface Models (DSMs). The use of physical models allowed analysis of effects of changes in scanner and scanning geometry, and performance of the change detection methods on different types of changes, including building collapse or subsistence, construction, and shifts in location. Results indicate that at low false-alarm rates, the point-to-point method slightly outperforms the model-to-model method. The point-to-point method is less sensitive to misregistration errors in the data. Best results are obtained when the baseline and change datasets are collected using the same LiDAR system and collection geometry.

  9. Use of biomarkers to evaluate the ecological risk of xenobiotics associated with agriculture.

    PubMed

    Lima, Liana Bezerra Dias de; Morais, Paula Benevides de; Andrade, Ricardo Lopes Tortorela de; Mattos, Luciana Vieira; Moron, Sandro Estevan

    2018-06-01

    This research aimed to evaluate the ecological risk of xenobiotics associated with agricultural activities by determining metal contents and biomarker responses using tucunaré (Cichla sp.) as a bioindicator. The work was conducted in the southwest region of the state of Tocantins, in the cities of Lagoa da Confusão and Pium. Water samples and specimens of Cichla sp. were collected in the Javaés and Formoso Rivers at three collection points (A, B and C). The concentrations of Cd, Pb, Cu, Cr, Mn, Ni and Zn in water and fish were analyzed. In fish, genotoxic, biochemical (glucose serum levels, AST (aspartate aminotransferase) and ALT (alanine aminotransferase) and histological (gills and liver) biomarkers were assessed. In the water, the Cr and Mn concentrations at the three collection points exceeded the values for Class 1 rivers. In the muscle, Cr was above the maximum limit allowed for human consumption at the three collection points, although the values at Points B and C were not significantly different from that at Point A (p > 0.05). At the three collection points, the micronucleus test revealed a low frequency of micronuclei. Significant hyperglycemia and a decrease in the AST activity of the fish collected at Point C was observed. In the gills, the most frequent alterations were at Stages I and II, which indicated mild to moderate damage, and epithelial detachment was the most frequent variation. In the liver tissue, the most frequently observed histological changes were at Stages I and II and included cytoplasmic vacuolization, nuclear hypertrophy, dilated sinusoids and bile stagnation. The integrated evaluation of these biomarkers indicated that fish collected from areas with intense agricultural activities presented adaptive responses that were likely caused by the availability and bioaccumulation of certain xenobiotics in the environment. Copyright © 2018 Elsevier Ltd. All rights reserved.

  10. Use of personalized Dynamic Treatment Regimes (DTRs) and Sequential Multiple Assignment Randomized Trials (SMARTs) in mental health studies

    PubMed Central

    Liu, Ying; ZENG, Donglin; WANG, Yuanjia

    2014-01-01

    Summary Dynamic treatment regimens (DTRs) are sequential decision rules tailored at each point where a clinical decision is made based on each patient’s time-varying characteristics and intermediate outcomes observed at earlier points in time. The complexity, patient heterogeneity, and chronicity of mental disorders call for learning optimal DTRs to dynamically adapt treatment to an individual’s response over time. The Sequential Multiple Assignment Randomized Trial (SMARTs) design allows for estimating causal effects of DTRs. Modern statistical tools have been developed to optimize DTRs based on personalized variables and intermediate outcomes using rich data collected from SMARTs; these statistical methods can also be used to recommend tailoring variables for designing future SMART studies. This paper introduces DTRs and SMARTs using two examples in mental health studies, discusses two machine learning methods for estimating optimal DTR from SMARTs data, and demonstrates the performance of the statistical methods using simulated data. PMID:25642116

  11. Evaluation of Alere i RSV for Rapid Detection of Respiratory Syncytial Virus in Children Hospitalized with Acute Respiratory Tract Infection.

    PubMed

    Peters, Rebecca Marie; Schnee, Sarah Valerie; Tabatabai, Julia; Schnitzler, Paul; Pfeil, Johannes

    2017-04-01

    Alere i RSV is a novel rapid test which applies a nicking enzyme amplification reaction to detect respiratory syncytial virus in point-of-care settings. In this study, we evaluated the Alere i RSV assay by using frozen nasopharyngeal swab samples that were collected in viral transport medium from children hospitalized with acute respiratory tract infection during the 2015-2016 winter season. Alere i RSV assay results were compared to those for Altona RealStar RSV real-time reverse transcription-PCR (RT-PCR). We found that the overall sensitivity and specificity of the Alere i RSV test was 100% (95% confidence intervals [CI], 93% to 100%) and 97% (95% CI, 89% to 100%), respectively. Positive samples were identified within 5 to 7 min from sample collection. Overall, the Alere i RSV test performed well compared to the RT-PCR assay and has the potential to facilitate the detection of RSV in point-of-care settings. Copyright © 2017 Peters et al.

  12. LWIR hyperspectral micro-imager for detection of trace explosive particles

    NASA Astrophysics Data System (ADS)

    Bingham, Adam L.; Lucey, Paul G.; Akagi, Jason T.; Hinrichs, John L.; Knobbe, Edward T.

    2014-05-01

    Chemical micro-imaging is a powerful tool for the detection and identification of analytes of interest against a cluttered background (i.e. trace explosive particles left behind in a fingerprint). While a variety of groups have demonstrated the efficacy of Raman instruments for these applications, point by point or line by line acquisition of a targeted field of view (FOV) is a time consuming process if it is to be accomplished with useful spatial resolutions. Spectrum Photonics has developed and demonstrated a prototype system utilizing long wave infrared hyperspectral microscopy, which enables the simultaneous collection of LWIR reflectance spectra from 8-14 μm in a 30 x 7 mm FOV with 30 μm spatial resolution in 30 s. An overview of the uncooled Sagnac-based LWIR HSM system will be given, emphasizing the benefits of this approach. Laboratory Hyperspectral data collected from custom mixtures and fingerprint residues is shown, focusing on the ability of the LWIR chemical micro-imager to detect chemicals of interest out of a cluttered background.

  13. Longitudinal Course of Risk for Parental Post-Adoption Depression

    PubMed Central

    Foli, Karen J.; South, Susan C.; Lim, Eunjung; Hebdon, Megan

    2016-01-01

    Objective To determine whether the Postpartum Depression Predictors Inventory-Revised (PDPI-R) could be used to reveal distinct classes of adoptive parents across time. Design Longitudinal data were collected via online surveys at 4-6 weeks pre-placement, 4-6 weeks post-placement, and 5-6 months post-placement. Setting Participants were primarily clients of the largest adoption agency in the United States. Participants Participants included 127 adoptive parents (68 mothers and 59 fathers). Methods We applied a latent class growth analysis to the PDPI-R and conducted mixed effects modeling of class, time, and class×time interaction for the following categories of explanatory variables: parental expectations; interpersonal variables; psychological symptoms; and life orientation. Results Four latent trajectory classes were found. Class 1 (55% of sample) showed a stably low level of PDPI-R scores over time. Class 2 (32%) reported mean scores below the cut-off points at all three time points. Class 3 (8%) started at an intermediate level and increased after post-placement, but decreased at 5-6 months post-placement. Class 4 (5%) had high mean scores at all three time points. Significant main effects were found for almost all explanatory variables for class and for several variables for time. Significant interactions between class and time were found for expectations about the child and amount of love and ambivalence in parent's intimate relationship. Conclusion Findings may assist nurses to be alert to trajectories of risk for post-adoption depression. Additional factors, not included in the PDPI-R, to determine risk for post-adoption depression may be needed for adoptive parents. PMID:26874267

  14. The Contribution of Agreeableness and Self-efficacy Beliefs to Prosociality

    PubMed Central

    CAPRARA, GIAN VITTORIO; ALESSANDRI, GUIDO; DI GIUNTA, LAURA; PANERAI, LAURA; EISENBERG, NANCY

    2010-01-01

    The present study examined how agreeableness and self-efficacy beliefs about responding empathically to others’ needs predict individuals’ prosociality across time. Participants were 377 adolescents (66% males) aged 16 at Time 1 and 18 at Time 2 who took part at this study. Measures of agreeableness, empathic self-efficacy and prosociality were collected at two time points. The findings corroborated the posited paths of relations to assigning agreeableness a major role in predicting the level of individuals’ prosociality. Empathic self-efficacy beliefs partially mediated the relation of agreeableness to prosociality. The posited conceptual model accounted for a significant portion of variance in prosociality and provides guidance with respect to interventions aimed at promoting prosociality. PMID:20592954

  15. Collective Deceleration: Toward a Compact Beam Dump

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wu, H.-C.; /Munich, Max Planck Inst. Quantenopt.; Tajima, T.

    With the increasing development of laser accelerators, the electron energy is already beyond GeV and even higher in near future. Conventional beam dump based on ionization or radiation loss mechanism is cumbersome and costly, also has radiological hazards. We revisit the stopping power of high-energy charged particles in matter and discuss the associated problem of beam dump from the point of view of collective deceleration. The collective stopping length in an ionized gas can be several orders of magnitude shorter than the Bethe-Bloch and multiple electromagnetic cascades stopping length in solid. At the mean time, the tenuous density of themore » gas makes the radioactivation negligible. Such a compact and non-radioactivating beam dump works well for short and dense bunches, which is typically generated from laser wakefield accelerator.« less

  16. New techniques to measure cliff change from historical oblique aerial photographs and structure-from-motion photogrammetry

    USGS Publications Warehouse

    Warrick, Jonathan; Ritchie, Andy; Adelman, Gabrielle; Adelman, Ken; Limber, Patrick W.

    2017-01-01

    Oblique aerial photograph surveys are commonly used to document coastal landscapes. Here it is shown that adequate overlap may exist in these photographic records to develop topographic models with Structure-from-Motion (SfM) photogrammetric techniques. Using photographs of Fort Funston, California, from the California Coastal Records Project, imagery were combined with ground control points in a four-dimensional analysis that produced topographic point clouds of the study area’s cliffs for 5 years spanning 2002 to 2010. Uncertainty was assessed by comparing point clouds with airborne LIDAR data, and these uncertainties were related to the number and spatial distribution of ground control points used in the SfM analyses. With six or more ground control points, the root mean squared errors between the SfM and LIDAR data were less than 0.30 m (minimum 1⁄4 0.18 m), and the mean systematic error was less than 0.10 m. The SfM results had several benefits over traditional airborne LIDAR in that they included point coverage on vertical- to-overhanging sections of the cliff and resulted in 10–100 times greater point densities. Time series of the SfM results revealed topographic changes, including landslides, rock falls, and the erosion of landslide talus along the Fort Funston beach. Thus, it was concluded that SfM photogrammetric techniques with historical oblique photographs allow for the extraction of useful quantitative information for mapping coastal topography and measuring coastal change. The new techniques presented here are likely applicable to many photograph collections and problems in the earth sciences.

  17. Exploring the utility of measures of critical thinking dispositions and professional behavior development in an audiology education program.

    PubMed

    Ng, Stella L; Bartlett, Doreen J; Lucy, S Deborah

    2013-05-01

    Discussions about professional behaviors are growing increasingly prevalent across health professions, especially as a central component to education programs. A strong critical thinking disposition, paired with critical consciousness, may provide future health professionals with a foundation for solving challenging practice problems through the application of sound technical skill and scientific knowledge without sacrificing sensitive, empathic, client-centered practice. In this article, we describe an approach to monitoring student development of critical thinking dispositions and key professional behaviors as a way to inform faculty members' and clinical supervisors' support of students and ongoing curriculum development. We designed this exploratory study to describe the trajectory of change for a cohort of audiology students' critical thinking dispositions (measured by the California Critical Thinking Disposition Inventory: [CCTDI]) and professional behaviors (using the Comprehensive Professional Behaviors Development Log-Audiology [CPBDL-A]) in an audiology program. Implications for the CCTDI and CPBDL-A in audiology entry-to-practice curricula and professional development will be discussed. This exploratory study involved a cohort of audiology students, studied over a two-year period, using a one-group repeated measures design. Eighteen audiology students (two male and 16 female), began the study. At the third and final data collection point, 15 students completed the CCTDI, and nine students completed the CPBDL-A. The CCTDI and CPBDL-A were each completed at three time points: at the beginning, at the middle, and near the end of the audiology education program. Data are presented descriptively in box plots to examine the trends of development for each critical thinking disposition dimension and each key professional behavior as well as for an overall critical thinking disposition score. For the CCTDI, there was a general downward trend from time point 1 to time point 2 and a general upward trend from time point 2 to time point 3. Students demonstrated upward trends from the initial to final time point for their self-assessed development of professional behaviors as indicated on the CPBDL-A. The CCTDI and CPBDL-A can be used by audiology education programs as mechanisms for inspiring, fostering, and monitoring the development of critical thinking dispositions and key professional behaviors in students. Feedback and mentoring about dispositions and behaviors in conjunction with completion of these measures is recommended for inspiring and fostering these key professional attributes. American Academy of Audiology.

  18. Physical Activity, Television Viewing Time, and 12-Year Changes in Waist Circumference

    PubMed Central

    SHIBATA, AI; OKA, KOICHIRO; SUGIYAMA, TAKEMI; SALMON, JO; DUNSTAN, DAVID W.; OWEN, NEVILLE

    2016-01-01

    ABSTRACT Purpose Both moderate-to-vigorous physical activity (MVPA) and sedentary behavior can be associated with adult adiposity. Much of the relevant evidence is from cross-sectional studies or from prospective studies with relevant exposure measures at a single time point before weight gain or incident obesity. This study examined whether changes in MVPA and television (TV) viewing time are associated with subsequent changes in waist circumference, using data from three separate observation points in a large population-based prospective study of Australian adults. Methods Data were obtained from the Australian Diabetes, Obesity, and Lifestyle study collected in 1999–2000 (baseline), 2004–2005 (wave 2), and 2011–2012 (wave 3). The study sample consisted of adults age 25 to 74 yr at baseline who also attended site measurement at three time points (n = 3261). Multilevel linear regression analysis examined associations of initial 5-yr changes in MVPA and TV viewing time (from baseline to wave 2) with 12-yr change in waist circumference (from baseline to wave 3), adjusting for well-known confounders. Results As categorical predictors, increases in MVPA significantly attenuated increases in waist circumference (P for trend < 0.001). TV viewing time change was not significantly associated with changes in waist circumference (P for trend = 0.06). Combined categories of MVPA and TV viewing time changes were predictive of waist circumference increases; compared with those who increased MVPA and reduced TV viewing time, those who reduced MVPA and increased TV viewing time had a 2-cm greater increase in waist circumference (P = 0.001). Conclusion Decreasing MVPA emerged as a significant predictor of increases in waist circumference. Increasing TV viewing time was also influential, but its impact was much weaker than MVPA. PMID:26501231

  19. Natural resource collection and desired family size: a longitudinal test of environment-population theories.

    PubMed

    Brauner-Otto, Sarah R; Axinn, William G

    2017-06-01

    Theories relating the changing environment to human fertility predict declining natural resources may actually increase the demand for children. Unfortunately most previous empirical studies have been limited to cross-sectional designs that limit our ability to understand links between processes that change over time. We take advantage of longitudinal measurement spanning more than a decade of change in the natural environment, household agricultural behaviors, and individual fertility preferences to reexamine this question. Using fixed-effects models, we find that women experiencing increasing time required to collect firewood to heat and cook or fodder to feed animals (the dominant needs for natural resources in this setting) increased their desired family size, even as many other macro-level changes have reduced desired family size. In contrast to previous, cross-sectional studies we find no evidence of such a relationship for men. Our findings regarding time spent collecting firewood are also new. These results support the "vicious circle" perspective and economic theories of fertility pointing to the value of children for household labor. This feedback from natural resource constraint to increased fertility is an important mechanism for understanding long term environmental change.

  20. Does Cognitive Ability Predict Mortality in the Ninth Decade? The Lothian Birth Cohort 1921

    ERIC Educational Resources Information Center

    Murray, Catherine; Pattie, Alison; Starr, John M.; Deary, Ian J.

    2012-01-01

    To test whether cognitive ability predicts survival from age 79 to 89 years data were collected from 543 (230 male) participants who entered the study at a mean age of 79.1 years. Most had taken the Moray House Test of general intelligence (MHT) when aged 11 and 79 years from which, in addition to intelligence measures at these two time points,…

  1. Induction of cold hardiness in an invasive herbivore: The case of hemlock woolly adelgid (Hemiptera: Adelgidae)

    Treesearch

    Joseph S. Elkinton; Jeffrey A. Lombardo; Artemis D. Roehrig; Thomas J. McAvoy; Albert Mayfield; Mark Whitmore

    2017-01-01

    As a measure of cold hardiness, we tested the supercooling points or freezing temperatures of individual hemlock woolly adelgids (Adelges tsugae Annand) collected from 15 locations across the north to south range of the adelgid in eastern North America at different times during two winters. Adelgids from the northern interior locations with USDA hardiness zones of 5B–...

  2. An analytical method to assess spruce beetle impacts on white spruce resources, Kenai Peninsula, Alaska.

    Treesearch

    Willem W.S. van Hees

    1992-01-01

    Forest inventory data collected in 1987 fTom sample plots established on the Kenai Peninsula were analyzed to provide point-in-time estimates of the trend and current status of a spruce beetle infestation. Ground plots were categorized by stage of infestation. Estimates of numbers of live and dead white spruce trees, cubic-foot volume in those trees, and areal extent...

  3. Development of an integrated, unattended assay system for LWR-MOX fuel pellet trays

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stewart, J.E.; Hatcher, C.R.; Pollat, L.L.

    1994-08-01

    Four identical unattended plutonium assay systems have been developed for use at the new light-water-reactor mixed oxide (LWR-MOX) fuel fabrication facility at Hanau, Germany. The systems provide quantitative plutonium verification for all MOX pellet trays entering or leaving a large, intermediate store. Pellet-tray transport and storage systems are highly automated. Data from the ``I-Point`` (information point) assay systems will be shared by the Euratom and International Atomic Energy Agency (IAEA) Inspectorates. The I-Point system integrates, for the first time, passive neutron coincidence counting (NCC) with electro-mechanical sensing (EMS) in unattended mode. Also, provisions have been made for adding high-resolution gammamore » spectroscopy. The system accumulates data for every tray entering or leaving the store between inspector visits. During an inspection, data are analyzed and compared with operator declarations for the previous inspection period, nominally one month. Specification of the I-point system resulted from a collaboration between the IAEA, Euratom, Siemens, and Los Alamos. Hardware was developed by Siemens and Los Alamos through a bilateral agreement between the German Federal Ministry of Research and Technology (BMFT) and the US DOE. Siemens also provided the EMS subsystem, including software. Through the USSupport Program to the IAEA, Los Alamos developed the NCC software (NCC COLLECT) and also the software for merging and reviewing the EMS and NCC data (MERGE/REVIEW). This paper describes the overall I-Point system, but emphasizes the NCC subsystem, along with the NCC COLLECT and MERGE/REVIEW codes. We also summarize comprehensive testing results that define the quality of assay performance.« less

  4. Injection Laryngoplasty Using Micronized Acellular Dermis for Vocal Fold Paralysis: Long-term Voice Outcomes.

    PubMed

    Hernandez, Stephen C; Sibley, Haley; Fink, Daniel S; Kunduk, Melda; Schexnaildre, Mell; Kakade, Anagha; McWhorter, Andrew J

    2016-05-01

    Micronized acellular dermis has been used for nearly 15 years to correct glottic insufficiency. With previous demonstration of safety and efficacy, this study aims to evaluate intermediate and long-term voice outcomes in those who underwent injection laryngoplasty for unilateral vocal fold paralysis. Technique and timing of injection were also reviewed to assess their impact on outcomes. Case series with chart review. Tertiary care center. Patients undergoing injection laryngoplasty from May 2007 to September 2012 were reviewed for possible inclusion. Pre- and postoperative Voice Handicap Index (VHI) scores, as well as senior speech-language pathologists' blinded assessment of voice, were collected for analysis. The final sample included patients who underwent injection laryngoplasty for unilateral vocal fold paralysis, 33 of whom had VHI results and 37 of whom had voice recordings. Additional data were obtained, including technique and timing of injection. Analysis was performed on those patients above with VHI and perceptual voice grades before and at least 6 months following injection. Mean VHI improved by 28.7 points at 6 to 12 months and 22.8 points at >12 months (P = .001). Mean perceptual voice grades improved by 17.6 points at 6 to 12 months and 16.3 points at >12 months (P < .001). No statistically significant difference was found with technique or time to injection. Micronized acellular dermis is a safe injectable that improved both patient-completed voice ratings and blinded reviewer voice gradings at intermediate and long-term follow-up. Further investigation may be warranted regarding technique and timing of injection. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2016.

  5. Key Microbiota Identification Using Functional Gene Analysis during Pepper (Piper nigrum L.) Peeling.

    PubMed

    Zhang, Jiachao; Hu, Qisong; Xu, Chuanbiao; Liu, Sixin; Li, Congfa

    2016-01-01

    Pepper pericarp microbiota plays an important role in the pepper peeling process for the production of white pepper. We collected pepper samples at different peeling time points from Hainan Province, China, and used a metagenomic approach to identify changes in the pericarp microbiota based on functional gene analysis. UniFrac distance-based principal coordinates analysis revealed significant changes in the pericarp microbiota structure during peeling, which were attributed to increases in bacteria from the genera Selenomonas and Prevotella. We identified 28 core operational taxonomic units at each time point, mainly belonging to Selenomonas, Prevotella, Megasphaera, Anaerovibrio, and Clostridium genera. The results were confirmed by quantitative polymerase chain reaction. At the functional level, we observed significant increases in microbial features related to acetyl xylan esterase and pectinesterase for pericarp degradation during peeling. These findings offer a new insight into biodegradation for pepper peeling and will promote the development of the white pepper industry.

  6. Key Microbiota Identification Using Functional Gene Analysis during Pepper (Piper nigrum L.) Peeling

    PubMed Central

    Xu, Chuanbiao; Liu, Sixin; Li, Congfa

    2016-01-01

    Pepper pericarp microbiota plays an important role in the pepper peeling process for the production of white pepper. We collected pepper samples at different peeling time points from Hainan Province, China, and used a metagenomic approach to identify changes in the pericarp microbiota based on functional gene analysis. UniFrac distance-based principal coordinates analysis revealed significant changes in the pericarp microbiota structure during peeling, which were attributed to increases in bacteria from the genera Selenomonas and Prevotella. We identified 28 core operational taxonomic units at each time point, mainly belonging to Selenomonas, Prevotella, Megasphaera, Anaerovibrio, and Clostridium genera. The results were confirmed by quantitative polymerase chain reaction. At the functional level, we observed significant increases in microbial features related to acetyl xylan esterase and pectinesterase for pericarp degradation during peeling. These findings offer a new insight into biodegradation for pepper peeling and will promote the development of the white pepper industry. PMID:27768750

  7. Mobile Phone Based Participatory Sensing in Hydrology

    NASA Astrophysics Data System (ADS)

    Lowry, C.; Fienen, M. N.; Böhlen, M.

    2014-12-01

    Although many observations in the hydrologic sciences are easy to obtain, requiring very little training or equipment, spatial and temporally-distributed data collection is hindered by associated personnel and telemetry costs. Lack of data increases the uncertainty and can limit applications of both field and modeling studies. However, modern society is much more digitally connected than the past, which presents new opportunities to collect real-time hydrologic data through the use of participatory sensing. Participatory sensing in this usage refers to citizens contributing distributed observations of physical phenomena. Real-time data streams are possible as a direct result of the growth of mobile phone networks and high adoption rates of mobile users. In this research, we describe an example of the development, methodology, barriers to entry, data uncertainty, and results of mobile phone based participatory sensing applied to groundwater and surface water characterization. Results are presented from three participatory sensing experiments that focused on stream stage, surface water temperature, and water quality. Results demonstrate variability in the consistency and reliability across the type of data collected and the challenges of collecting research grade data. These studies also point to needed improvements and future developments for widespread use of low cost techniques for participatory sensing.

  8. Improving pointing of Toruń 32-m radio telescope: effects of rail surface irregularities

    NASA Astrophysics Data System (ADS)

    Lew, Bartosz

    2018-03-01

    Over the last few years a number of software and hardware improvements have been implemented to the 32-m Cassegrain radio telescope located near Toruń. The 19-bit angle encoders have been upgraded to 29-bit in azimuth and elevation axes. The control system has been substantially improved, in order to account for a number of previously-neglected, astrometric effects that are relevant for milli-degree pointing. In the summer 2015, as a result of maintenance works, the orientation of the secondary mirror has been slightly altered, which resulted in worsening of the pointing precision, much below the nominal telescope capabilities. In preparation for observations at the highest available frequency of 30-GHz, we use One Centimeter Receiver Array (OCRA), to take the most accurate pointing data ever collected with the telescope, and we analyze it in order to improve the pointing precision. We introduce a new generalized pointing model that, for the first time, accounts for the rail irregularities, and we show that the telescope can have root mean square pointing accuracy at the level < 8″ and < 12″ in azimuth and elevation respectively. Finally, we discuss the implemented pointing improvements in the light of effects that may influence their long-term stability.

  9. Testing photogrammetry-based techniques for three-dimensional surface documentation in forensic pathology.

    PubMed

    Urbanová, Petra; Hejna, Petr; Jurda, Mikoláš

    2015-05-01

    Three-dimensional surface technologies particularly close range photogrammetry and optical surface scanning have recently advanced into affordable, flexible and accurate techniques. Forensic postmortem investigation as performed on a daily basis, however, has not yet fully benefited from their potentials. In the present paper, we tested two approaches to 3D external body documentation - digital camera-based photogrammetry combined with commercial Agisoft PhotoScan(®) software and stereophotogrammetry-based Vectra H1(®), a portable handheld surface scanner. In order to conduct the study three human subjects were selected, a living person, a 25-year-old female, and two forensic cases admitted for postmortem examination at the Department of Forensic Medicine, Hradec Králové, Czech Republic (both 63-year-old males), one dead to traumatic, self-inflicted, injuries (suicide by hanging), the other diagnosed with the heart failure. All three cases were photographed in 360° manner with a Nikon 7000 digital camera and simultaneously documented with the handheld scanner. In addition to having recorded the pre-autopsy phase of the forensic cases, both techniques were employed in various stages of autopsy. The sets of collected digital images (approximately 100 per case) were further processed to generate point clouds and 3D meshes. Final 3D models (a pair per individual) were counted for numbers of points and polygons, then assessed visually and compared quantitatively using ICP alignment algorithm and a cloud point comparison technique based on closest point to point distances. Both techniques were proven to be easy to handle and equally laborious. While collecting the images at autopsy took around 20min, the post-processing was much more time-demanding and required up to 10h of computation time. Moreover, for the full-body scanning the post-processing of the handheld scanner required rather time-consuming manual image alignment. In all instances the applied approaches produced high-resolution photorealistic, real sized or easy to calibrate 3D surface models. Both methods equally failed when the scanned body surface was covered with body hair or reflective moist areas. Still, it can be concluded that single camera close range photogrammetry and optical surface scanning using Vectra H1 scanner represent relatively low-cost solutions which were shown to be beneficial for postmortem body documentation in forensic pathology. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  10. Evaluation of microRNA stability in feces from healthy dogs.

    PubMed

    Cirera, Susanna; Willumsen, Line M; Johansen, Thea T; Nielsen, Lise N

    2018-03-01

    Gastrointestinal cancer accounts for approximately 8% of all canine malignancies. Early detection of cancer may have a tremendous impact on both treatment options and prognosis. MicroRNAs (miRNAs), a class of noncoding RNAs that can be found stably expressed in body fluids and feces, have been suggested as valuable human cancer biomarkers. The purpose of the study was to investigate the feasibility of detecting miRNAs in canine feces and to determine the miRNA stability in fecal samples stored at different temperatures for different duration. The levels of 4 Canine familiaris (cfa) miRNAs (cfa-miR-16, cfa-miR-20a, cfa-miR-21, and cfa-miR-92a) were investigated by quantitative real-time PCR(qPCR) in fecal samples from 10 healthy dogs. Fecal samples were collected at 3 different time points and samples from the first time point were stored at different temperatures and for a different duration. A statistically significant difference was found in miRNA levels from samples stored at room temperature compared with samples stored at -20°C for cfa-miR-16 and cfa-miR-21. No significant difference was found in the level of the investigated miRNAs over time. Overall, miRNAs are present in dog feces at measurable levels. Some miRNAs seem to be subject to a higher degree of degradation in samples stored at room temperature for 24 hours compared with samples frozen after collection at -20°C. The investigated miRNAs were stably expressed over time. This study provides the basis for further research on miRNA expression profiles as biomarkers for gastrointestinal cancer in dogs. © 2018 American Society for Veterinary Clinical Pathology.

  11. Exploring the variation of oral microbiota in supragingival plaque during and after head-and-neck radiotherapy using pyrosequencing.

    PubMed

    Gao, Li; Hu, Yuejian; Wang, Yuxia; Jiang, Wenxin; He, Zhiyan; Zhu, Cailian; Ma, Rui; Huang, Zhengwei

    2015-09-01

    The aim of this article was to study the variation in oral microflora of the subgingival plaque during and after radiotherapy. During and after radiotherapy, microbial samples were collected at seven time points (early stage, medium stage, and later stage of radiotherapy, and 1 month, 3 months, 6 months, and 1 year after radiotherapy) in three subjects for a total of 21 samples. Polymerase chain reaction (PCR) amplification was carried out on the 16S rDNA hypervariable V1-V3 region, and then the PCR products were determined by high-throughput pyrosequencing. The rarefaction curve indicating the richness of the microflora demonstrated that the number of operational taxonomic units (OTUs) was in decline from the early stage of radiotherapy to the time point 1 month after radiotherapy and then trended upward. The Shannon diversity index declined during radiotherapy (ranging from 4.59 to 3.73), and generally rose after radiotherapy, with the lowest value of 3.5 (1 month after radiotherapy) and highest value of 4.75 (6 months after radiotherapy). A total of 120 genera were found; five genera (Actinomyces, Veillonella, Prevotella, Streptococcus, Campylobacter) were found in all subjects across all time points. The richness and diversity of oral ecology decreased with increased radiation dose, and it was gradually restored with time. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. An adipoinductive role of inflammation in adipose tissue engineering: key factors in the early development of engineered soft tissues.

    PubMed

    Lilja, Heidi E; Morrison, Wayne A; Han, Xiao-Lian; Palmer, Jason; Taylor, Caroline; Tee, Richard; Möller, Andreas; Thompson, Erik W; Abberton, Keren M

    2013-05-15

    Tissue engineering and cell implantation therapies are gaining popularity because of their potential to repair and regenerate tissues and organs. To investigate the role of inflammatory cytokines in new tissue development in engineered tissues, we have characterized the nature and timing of cell populations forming new adipose tissue in a mouse tissue engineering chamber (TEC) and characterized the gene and protein expression of cytokines in the newly developing tissues. EGFP-labeled bone marrow transplant mice and MacGreen mice were implanted with TEC for periods ranging from 0.5 days to 6 weeks. Tissues were collected at various time points and assessed for cytokine expression through ELISA and mRNA analysis or labeled for specific cell populations in the TEC. Macrophage-derived factors, such as monocyte chemotactic protein-1 (MCP-1), appear to induce adipogenesis by recruiting macrophages and bone marrow-derived precursor cells to the TEC at early time points, with a second wave of nonbone marrow-derived progenitors. Gene expression analysis suggests that TNFα, LCN-2, and Interleukin 1β are important in early stages of neo-adipogenesis. Increasing platelet-derived growth factor and vascular endothelial cell growth factor expression at early time points correlates with preadipocyte proliferation and induction of angiogenesis. This study provides new information about key elements that are involved in early development of new adipose tissue.

  13. Correlation of tissue concentrations of the pyrethroid bifenthrin with neurotoxicity in the rat.

    PubMed

    Scollon, Edward J; Starr, James M; Crofton, Kevin M; Wolansky, Marcelo J; DeVito, Michael J; Hughes, Michael F

    2011-11-28

    The potential for human exposure to pyrethroid pesticides has prompted pharmacodynamic and pharmacokinetic research to better characterize risk. This work tested the hypothesis that blood and brain concentrations of the pyrethroid bifenthrin are predictive of neurotoxic effects. Adult male Long Evans rats received a single oral dose of bifenthrin dissolved in corn oil. Using figure-eight mazes, motor activity was measured for 1h at 4- and 7-h following exposure to bifenthrin (0-16mg/kg or 0-9mg/kg, respectively; n=4-8/group). Whole blood and brains were collected immediately following motor activity assays. Bifenthrin concentrations in blood and brain were quantified using HPLC/MS/MS. Bifenthrin exposure decreased motor activity from 20% to 70% in a dose-dependent manner at both time points. The relationship between motor activity data and administered dose, and blood and brain bifenthrin concentrations were described using a sigmoidal E(max) model. The relationships between motor activity and administered dose or blood concentrations were different between the 4- and 7-h time points. The relationship between motor activity and brain concentration was not significantly different between the two time points. These data suggest that momentary brain concentration of bifenthrin may be a more precise dose metric for predicting behavioral effects because the relationship between brain concentration and locomotor activity is independent of the time of exposure. Published by Elsevier Ireland Ltd.

  14. Investigation of the influence of sampling schemes on quantitative dynamic fluorescence imaging

    PubMed Central

    Dai, Yunpeng; Chen, Xueli; Yin, Jipeng; Wang, Guodong; Wang, Bo; Zhan, Yonghua; Nie, Yongzhan; Wu, Kaichun; Liang, Jimin

    2018-01-01

    Dynamic optical data from a series of sampling intervals can be used for quantitative analysis to obtain meaningful kinetic parameters of probe in vivo. The sampling schemes may affect the quantification results of dynamic fluorescence imaging. Here, we investigate the influence of different sampling schemes on the quantification of binding potential (BP) with theoretically simulated and experimentally measured data. Three groups of sampling schemes are investigated including the sampling starting point, sampling sparsity, and sampling uniformity. In the investigation of the influence of the sampling starting point, we further summarize two cases by considering the missing timing sequence between the probe injection and sampling starting time. Results show that the mean value of BP exhibits an obvious growth trend with an increase in the delay of the sampling starting point, and has a strong correlation with the sampling sparsity. The growth trend is much more obvious if throwing the missing timing sequence. The standard deviation of BP is inversely related to the sampling sparsity, and independent of the sampling uniformity and the delay of sampling starting time. Moreover, the mean value of BP obtained by uniform sampling is significantly higher than that by using the non-uniform sampling. Our results collectively suggest that a suitable sampling scheme can help compartmental modeling of dynamic fluorescence imaging provide more accurate results and simpler operations. PMID:29675325

  15. The Global Ocean Observing System: One perspective

    NASA Technical Reports Server (NTRS)

    Wilson, J. Ron

    1992-01-01

    This document presents a possible organization for a Global Ocean Observing System (GOOS) within the Intergovernmental Oceanographic Commission and the joint ocean programs with the World Meteorological Organization. The document and the organization presented here is not intended to be definitive, complete or the best possible organization for such an observation program. It is presented at this time to demonstrate three points. The first point to be made is that an international program office for GOOS along the lines of the WOCE and TOGA IPOs is essential. The second point is that national programs will have to continue to collect data at the scale of WOCE plus TOGA and more. The third point is that there are many existing groups and committees within the IOC and joint IOC/WMO ocean programs that can contribute essential experience to and form part of the basis of a Global Ocean Observing System. It is particularly important to learn from what has worked and what has not worked in the past if a successful ocean observing system is to result.

  16. Weight loss and isotopic shifts for water drops frozen on a liquid nitrogen surface.

    PubMed

    Eguchi, Keiko; Abe, Osamu; Hiyama, Tetsuya

    2008-10-01

    A liquid nitrogen freezing method was used to collect raindrops for the determination of isotope-size distribution. Water drops that fall onto a surface of liquid nitrogen stay suspended for 10 to 20 s, until their temperature reaches the Leidenfrost point (126 K). As their temperature falls to the freezing point, they release their heat by thermal conduction. At the freezing point, latent heat of fusion is released, along with a significant loss of water. After freezing completely, the ice droplets stay suspended, cooling by thermal conduction until they reach the Leidenfrost point. They then lose buoyancy and start sinking. Consistent isotopic changes of 1.5 +/- 0.4 and 0.33 +/- 0.05 per thousand for hydrogen and oxygen, respectively, were found for droplets with radii between 1.0 and 1.5 mm. Isotope fractionation appeared to occur at the same time as water loss, as the droplets were freezing, in what was probably a kinetic effect.

  17. A Data Filter for Identifying Steady-State Operating Points in Engine Flight Data for Condition Monitoring Applications

    NASA Technical Reports Server (NTRS)

    Simon, Donald L.; Litt, Jonathan S.

    2010-01-01

    This paper presents an algorithm that automatically identifies and extracts steady-state engine operating points from engine flight data. It calculates the mean and standard deviation of select parameters contained in the incoming flight data stream. If the standard deviation of the data falls below defined constraints, the engine is assumed to be at a steady-state operating point, and the mean measurement data at that point are archived for subsequent condition monitoring purposes. The fundamental design of the steady-state data filter is completely generic and applicable for any dynamic system. Additional domain-specific logic constraints are applied to reduce data outliers and variance within the collected steady-state data. The filter is designed for on-line real-time processing of streaming data as opposed to post-processing of the data in batch mode. Results of applying the steady-state data filter to recorded helicopter engine flight data are shown, demonstrating its utility for engine condition monitoring applications.

  18. Mirrored pyramidal wells for simultaneous multiple vantage point microscopy.

    PubMed

    Seale, K T; Reiserer, R S; Markov, D A; Ges, I A; Wright, C; Janetopoulos, C; Wikswo, J P

    2008-10-01

    We report a novel method for obtaining simultaneous images from multiple vantage points of a microscopic specimen using size-matched microscopic mirrors created from anisotropically etched silicon. The resulting pyramidal wells enable bright-field and fluorescent side-view images, and when combined with z-sectioning, provide additional information for 3D reconstructions of the specimen. We have demonstrated the 3D localization and tracking over time of the centrosome of a live Dictyostelium discoideum. The simultaneous acquisition of images from multiple perspectives also provides a five-fold increase in the theoretical collection efficiency of emitted photons, a property which may be useful for low-light imaging modalities such as bioluminescence, or low abundance surface-marker labelling.

  19. Crossover from BCS to Bose superconductivity: A functional integral approach

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Randeria, M.; Sa de Melo, C.A.R.; Engelbrecht, J.R.

    1993-04-01

    We use a functional integral formulation to study the crossover from cooperative Cooper pairing to the formation and condensation of tightly bound pairs in a 3D continuum model of fermions with attractive interactions. The inadequacy of a saddle point approximation with increasing coupling is pointed out, and the importance of temporal (quantum) fluctuations for normal state properties at intermediate and strong coupling is emphasized. In addition to recovering the Nozieres-Schmitt-Pink interpolation scheme for T{sub c}, and the Leggett variational results for T = 0, we also present results for evolution of the time-dependent Ginzburg-Landau equation and collective mode spectrum asmore » a function of the coupling.« less

  20. Population trends and flight behavior of the American burying beetle, Nicrophorus americanus (Coleoptera: Silphidae), on Block Island, RI

    USGS Publications Warehouse

    Raithel, C.J.; Ginsberg, H.S.; Prospero, M.L.

    2006-01-01

    The endangered American burying beetle, Nicrophorus americanus, was monitored on Block Island, RI, USA, from 1991-2003 using mark-recapture population estimates of adults collected in pitfall traps. Populations increased through time, especially after 1994 when a program was initiated that provided carrion for beetle production. Beetle captures increased with increasing temperature and dew point, and decreased with increasing wind speed. Short distance movement was not related to wind direction, while longer distance flights tended to be downwind. Although many individuals flew considerable distances along transects, most recaptures were in traps near the point of release. These behaviors probably have counterbalancing effects on population estimates.

  1. Real-time alpha monitoring of a radioactive liquid waste stream at Los Alamos National Laboratory

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, J.D.; Whitley, C.R.; Rawool-Sullivan, M.

    1995-12-31

    This poster display concerns the development, installation, and testing of a real-time radioactive liquid waste monitor at Los Alamos National Laboratory (LANL). The detector system was designed for the LANL Radioactive Liquid Waste Treatment Facility so that influent to the plant could be monitored in real time. By knowing the activity of the influent, plant operators can better monitor treatment, better segregate waste (potentially), and monitor the regulatory compliance of users of the LANL Radioactive Liquid Waste Collection System. The detector system uses long-range alpha detection technology, which is a nonintrusive method of characterization that determines alpha activity on themore » liquid surface by measuring the ionization of ambient air. Extensive testing has been performed to ensure long-term use with a minimal amount of maintenance. The final design was a simple cost-effective alpha monitor that could be modified for monitoring influent waste streams at various points in the LANL Radioactive Liquid Waste Collection System.« less

  2. Light-efficient photography.

    PubMed

    Hasinoff, Samuel W; Kutulakos, Kiriakos N

    2011-11-01

    In this paper, we consider the problem of imaging a scene with a given depth of field at a given exposure level in the shortest amount of time possible. We show that by 1) collecting a sequence of photos and 2) controlling the aperture, focus, and exposure time of each photo individually, we can span the given depth of field in less total time than it takes to expose a single narrower-aperture photo. Using this as a starting point, we obtain two key results. First, for lenses with continuously variable apertures, we derive a closed-form solution for the globally optimal capture sequence, i.e., that collects light from the specified depth of field in the most efficient way possible. Second, for lenses with discrete apertures, we derive an integer programming problem whose solution is the optimal sequence. Our results are applicable to off-the-shelf cameras and typical photography conditions, and advocate the use of dense, wide-aperture photo sequences as a light-efficient alternative to single-shot, narrow-aperture photography.

  3. Limnology of Blue Mesa, Morrow Point, and Crystal Reservoirs, Curecanti National Recreation area, during 1999, and a 25-year retrospective of nutrient conditions in Blue Mesa Reservoir, Colorado

    USGS Publications Warehouse

    Bauch, Nancy J.; Malick, Matt

    2003-01-01

    The U.S. Geological Survey and the National Park Service conducted a water-quality investigation in Curecanti National Recreation Area in Colorado from April through December 1999. Current (as of 1999) limnological characteristics, including nutrients, phytoplankton, chlorophyll-a, trophic status, and the water quality of stream inflows and reservoir outflows, of Blue Mesa, Morrow Point, and Crystal Reservoirs were assessed, and a 25-year retrospective of nutrient conditions in Blue Mesa Reservoir was conducted. The three reservoirs are in a series on the Gunnison River, with an upstream to downstream order of Blue Mesa, Morrow Point, and Crystal Reservoirs. Physical properties and water-quality samples were collected four times during 1999 from reservoir, inflow, and outflow sites in and around the recreation area. Samples were analyzed for nutrients, phytoplankton and chlorophyll-a (reservoir sites only), and suspended sediment (stream inflows only). Nutrient concentrations in the reservoirs were low; median total nitrogen and phosphorus concentrations were less than 0.4 and 0.06 milligram per liter, respectively. During water-column stratification, samples collected at depth had higher nutrient concentrations than photic-zone samples. Phytoplankton community and density were affected by water temperature, nutrients, and water residence time. Diatoms were the dominant phytoplankton throughout the year in Morrow Point and Crystal Reservoirs and during spring and early winter in Blue Mesa Reservoir. Blue-green algae were dominant in Blue Mesa Reservoir during summer and fall. Phytoplankton density was highest in Blue Mesa Reservoir and lowest in Crystal Reservoir. Longer residence times and warmer temperatures in Blue Mesa Reservoir were favorable for phytoplankton growth and development. Shorter residence times and cooler temperatures in the downstream reservoirs probably limited phytoplankton growth and development. Median chlorophyll-a concentrations were higher in Blue Mesa Reservoir than Morrow Point or Crystal Reservoirs. Blue Mesa Reservoir was mesotrophic in upstream areas and oligotrophic downstream. Both Morrow Point and Crystal Reservoirs were oligotrophic. Trophic-state index values were determined for total phosphorus, chlorophyll-a, and Secchi depth for each reservoir by the Carlson method; all values ranged between 29 and 55. Only the upstream areas in Blue Mesa Reservoir had total phosphorus and chlorophyll-a indices above 50, reflecting mesotrophic conditions. Nutrient inflows to Blue Mesa Reservoir, which were derived primarily from the Gunnison River, varied on a seasonal basis, whereas nutrient inflows to Morrow Point and Crystal Reservoirs, which were derived primarily from deep water releases from the respective upstream reservoir, were steady throughout the sampling period. Total phosphorus concentrations were elevated in many stream inflows. A comparison of current (as of 1999) and historical nutrient, chlorophyll-a, and trophic conditions in Blue Mesa Reservoir and its tributaries indicated that the trophic status in Blue Mesa Reservoir has not changed over the last 25 years, and more recent nutrient enrichment has not occurred.

  4. Effects of prolonged stress on salivary cortisol and dehydroepiandrosterone: a study of a two-week teaching practice.

    PubMed

    Izawa, Shuhei; Saito, Keisuke; Shirotsuki, Kentaro; Sugaya, Nagisa; Nomura, Shinobu

    2012-06-01

    This study investigated variations in salivary levels of cortisol and dehydroepiandrosterone (DHEA) in a prolonged stressful situation (a two-week teaching practice). Thirty-three women for whom a two-week teaching practice at a kindergarten was scheduled were asked to collect saliva samples at awakening, 30 min after awakening, and bedtime at four time points: two weeks before the practice, the first week of the practice, the second week of the practice, and a few days after the practice. In addition, they completed questionnaires for assessing perceived stress and subjective moods on each day. A linear mixed model indicated that cortisol levels significantly increased during the first and second week of the practice compared with those before and after the practice period, and that DHEA levels significantly decreased after the practice period compared with those at the other time points. Further, cortisol awakening response after the practice period significantly reduced compared with that at the other time points. Scores of perceived stress and negative moods were also higher during the practice period. This study showed that prolonged stress affected cortisol and DHEA secretion during as well as after the stress period. Copyright © 2011 Elsevier Ltd. All rights reserved.

  5. Microbial community changes in hydraulic fracturing fluids and produced water from shale gas extraction.

    PubMed

    Murali Mohan, Arvind; Hartsock, Angela; Bibby, Kyle J; Hammack, Richard W; Vidic, Radisav D; Gregory, Kelvin B

    2013-11-19

    Microbial communities associated with produced water from hydraulic fracturing are not well understood, and their deleterious activity can lead to significant increases in production costs and adverse environmental impacts. In this study, we compared the microbial ecology in prefracturing fluids (fracturing source water and fracturing fluid) and produced water at multiple time points from a natural gas well in southwestern Pennsylvania using 16S rRNA gene-based clone libraries, pyrosequencing, and quantitative PCR. The majority of the bacterial community in prefracturing fluids constituted aerobic species affiliated with the class Alphaproteobacteria. However, their relative abundance decreased in produced water with an increase in halotolerant, anaerobic/facultative anaerobic species affiliated with the classes Clostridia, Bacilli, Gammaproteobacteria, Epsilonproteobacteria, Bacteroidia, and Fusobacteria. Produced water collected at the last time point (day 187) consisted almost entirely of sequences similar to Clostridia and showed a decrease in bacterial abundance by 3 orders of magnitude compared to the prefracturing fluids and produced water samplesfrom earlier time points. Geochemical analysis showed that produced water contained higher concentrations of salts and total radioactivity compared to prefracturing fluids. This study provides evidence of long-term subsurface selection of the microbial community introduced through hydraulic fracturing, which may include significant implications for disinfection as well as reuse of produced water in future fracturing operations.

  6. Contaminant point source localization error estimates as functions of data quantity and model quality

    NASA Astrophysics Data System (ADS)

    Hansen, Scott K.; Vesselinov, Velimir V.

    2016-10-01

    We develop empirically-grounded error envelopes for localization of a point contamination release event in the saturated zone of a previously uncharacterized heterogeneous aquifer into which a number of plume-intercepting wells have been drilled. We assume that flow direction in the aquifer is known exactly and velocity is known to within a factor of two of our best guess from well observations prior to source identification. Other aquifer and source parameters must be estimated by interpretation of well breakthrough data via the advection-dispersion equation. We employ high performance computing to generate numerous random realizations of aquifer parameters and well locations, simulate well breakthrough data, and then employ unsupervised machine optimization techniques to estimate the most likely spatial (or space-time) location of the source. Tabulating the accuracy of these estimates from the multiple realizations, we relate the size of 90% and 95% confidence envelopes to the data quantity (number of wells) and model quality (fidelity of ADE interpretation model to actual concentrations in a heterogeneous aquifer with channelized flow). We find that for purely spatial localization of the contaminant source, increased data quantities can make up for reduced model quality. For space-time localization, we find similar qualitative behavior, but significantly degraded spatial localization reliability and less improvement from extra data collection. Since the space-time source localization problem is much more challenging, we also tried a multiple-initial-guess optimization strategy. This greatly enhanced performance, but gains from additional data collection remained limited.

  7. Expanding Lorentz and spectrum corrections to large volumes of reciprocal space for single-crystal time-of-flight neutron diffraction

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Michels-Clark, Tara M.; Savici, Andrei T.; Lynch, Vickie E.

    Evidence is mounting that potentially exploitable properties of technologically and chemically interesting crystalline materials are often attributable to local structure effects, which can be observed as modulated diffuse scattering (mDS) next to Bragg diffraction (BD). BD forms a regular sparse grid of intense discrete points in reciprocal space. Traditionally, the intensity of each Bragg peak is extracted by integration of each individual reflection first, followed by application of the required corrections. In contrast, mDS is weak and covers expansive volumes of reciprocal space close to, or between, Bragg reflections. For a representative measurement of the diffuse scattering, multiple sample orientationsmore » are generally required, where many points in reciprocal space are measured multiple times and the resulting data are combined. The common post-integration data reduction method is not optimal with regard to counting statistics. A general and inclusive data processing method is needed. In this contribution, a comprehensive data analysis approach is introduced to correct and merge the full volume of scattering data in a single step, while correctly accounting for the statistical weight of the individual measurements. Lastly, development of this new approach required the exploration of a data treatment and correction protocol that includes the entire collected reciprocal space volume, using neutron time-of-flight or wavelength-resolved data collected at TOPAZ at the Spallation Neutron Source at Oak Ridge National Laboratory.« less

  8. Expanding Lorentz and spectrum corrections to large volumes of reciprocal space for single-crystal time-of-flight neutron diffraction

    DOE PAGES

    Michels-Clark, Tara M.; Savici, Andrei T.; Lynch, Vickie E.; ...

    2016-03-01

    Evidence is mounting that potentially exploitable properties of technologically and chemically interesting crystalline materials are often attributable to local structure effects, which can be observed as modulated diffuse scattering (mDS) next to Bragg diffraction (BD). BD forms a regular sparse grid of intense discrete points in reciprocal space. Traditionally, the intensity of each Bragg peak is extracted by integration of each individual reflection first, followed by application of the required corrections. In contrast, mDS is weak and covers expansive volumes of reciprocal space close to, or between, Bragg reflections. For a representative measurement of the diffuse scattering, multiple sample orientationsmore » are generally required, where many points in reciprocal space are measured multiple times and the resulting data are combined. The common post-integration data reduction method is not optimal with regard to counting statistics. A general and inclusive data processing method is needed. In this contribution, a comprehensive data analysis approach is introduced to correct and merge the full volume of scattering data in a single step, while correctly accounting for the statistical weight of the individual measurements. Lastly, development of this new approach required the exploration of a data treatment and correction protocol that includes the entire collected reciprocal space volume, using neutron time-of-flight or wavelength-resolved data collected at TOPAZ at the Spallation Neutron Source at Oak Ridge National Laboratory.« less

  9. The Direct Georeferencing Application and Performance Analysis of Uav Helicopter in Gcp-Free Area

    NASA Astrophysics Data System (ADS)

    Lo, C. F.; Tsai, M. L.; Chiang, K. W.; Chu, C. H.; Tsai, G. J.; Cheng, C. K.; El-Sheimy, N.; Ayman, H.

    2015-08-01

    There are many disasters happened because the weather changes extremely in these years. To facilitate applications such as environment detection or monitoring becomes very important. Therefore, the development of rapid low cost systems for collecting near real-time spatial information is very critical. Rapid spatial information collection has become an emerging trend for remote sensing and mapping applications. This study develops a Direct Georeferencing (DG) based Unmanned Aerial Vehicle (UAV) helicopter photogrammetric platform where an Inertial Navigation System (INS)/Global Navigation Satellite System (GNSS) integrated Positioning and Orientation System (POS) system is implemented to provide the DG capability of the platform. The performance verification indicates that the proposed platform can capture aerial images successfully. A flight test is performed to verify the positioning accuracy in DG mode without using Ground Control Points (GCP). The preliminary results illustrate that horizontal DG positioning accuracies in the x and y axes are around 5 meter with 100 meter flight height. The positioning accuracy in the z axis is less than 10 meter. Such accuracy is good for near real-time disaster relief. The DG ready function of proposed platform guarantees mapping and positioning capability even in GCP free environments, which is very important for rapid urgent response for disaster relief. Generally speaking, the data processing time for the DG module, including POS solution generalization, interpolation, Exterior Orientation Parameters (EOP) generation, and feature point measurements, is less than 1 hour.

  10. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Burnison, Shaughn; Livers-Douglas, Amanda; Barajas-Olalde, Cesar

    The scalable, automated, semipermanent seismic array (SASSA) project led and managed by the Energy & Environmental Research Center (EERC) was designed as a 3-year proof-of-concept study to evaluate and demonstrate an innovative application of the seismic method. The concept was to use a sparse surface array of 96 nodal seismic sensors paired with a single, remotely operated active seismic source at a fixed location to monitor for CO 2 saturation changes in a subsurface reservoir by processing the data for time-lapse changes at individual, strategically chosen reservoir reflection points. The combination of autonomous equipment and modern processing algorithms was usedmore » to apply the seismic method in a manner different from the normal paradigm of collecting a spatially dense data set to produce an image. It was used instead to monitor individual, strategically chosen reservoir reflection points for detectable signal character changes that could be attributed to the passing of a CO 2 saturation front or, possibly, changes in reservoir pressure. Data collection occurred over the course of 1 year at an oil field undergoing CO 2 injection for enhanced oil recovery (EOR) and focused on four overlapping “five-spot” EOR injector–producer patterns. Selection, procurement, configuration, installation, and testing of project equipment and collection of five baseline data sets were completed in advance of CO 2 injection within the study area. Weekly remote data collection produced 41 incremental time-lapse records for each of the 96 nodes. Validation was provided by two methods: 1) a conventional 2-D seismic line acquired through the center of the study area before injection started and again after the project ended and processed in a time-lapse manner and 2) by CO 2 saturation maps created from reservoir simulations based on injection and production history matching. Interpreted results were encouraging but mixed, with indications of changes likely due to the presence of CO 2 on some node reflection points where and when effects would be expected and noneffects where no CO 2 was expected, while results at some locations where simulation outputs suggested CO 2 should be present were ambiguous. Acquisition noise impacted interpretation of data at several locations. Many lessons learned were generated by the study to inform and improve results on a follow-up study. The ultimate aim of the project was to evaluate whether deployment of a SASSA technology can provide a useful and cost-effective monitoring solution for future CO 2 injection projects. The answer appears to be affirmative, with the expectation that lessons learned applied to future iterations, together with technology advances, will likely result in significant improvements.« less

  11. Reviving common standards in point-count surveys for broad inference across studies

    USGS Publications Warehouse

    Matsuoka, Steven M.; Mahon, C. Lisa; Handel, Colleen M.; Solymos, Peter; Bayne, Erin M.; Fontaine, Patricia C.; Ralph, C.J.

    2014-01-01

    We revisit the common standards recommended by Ralph et al. (1993, 1995a) for conducting point-count surveys to assess the relative abundance of landbirds breeding in North America. The standards originated from discussions among ornithologists in 1991 and were developed so that point-count survey data could be broadly compared and jointly analyzed by national data centers with the goals of monitoring populations and managing habitat. Twenty years later, we revisit these standards because (1) they have not been universally followed and (2) new methods allow estimation of absolute abundance from point counts, but these methods generally require data beyond the original standards to account for imperfect detection. Lack of standardization and the complications it introduces for analysis become apparent from aggregated data. For example, only 3% of 196,000 point counts conducted during the period 1992-2011 across Alaska and Canada followed the standards recommended for the count period and count radius. Ten-minute, unlimited-count-radius surveys increased the number of birds detected by >300% over 3-minute, 50-m-radius surveys. This effect size, which could be eliminated by standardized sampling, was ≥10 times the published effect sizes of observers, time of day, and date of the surveys. We suggest that the recommendations by Ralph et al. (1995a) continue to form the common standards when conducting point counts. This protocol is inexpensive and easy to follow but still allows the surveys to be adjusted for detection probabilities. Investigators might optionally collect additional information so that they can analyze their data with more flexible forms of removal and time-of-detection models, distance sampling, multiple-observer methods, repeated counts, or combinations of these methods. Maintaining the common standards as a base protocol, even as these study-specific modifications are added, will maximize the value of point-count data, allowing compilation and analysis by regional and national data centers.

  12. Sensor-triggered sampling to determine instantaneous airborne vapor exposure concentrations.

    PubMed

    Smith, Philip A; Simmons, Michael K; Toone, Phillip

    2018-06-01

    It is difficult to measure transient airborne exposure peaks by means of integrated sampling for organic chemical vapors, even with very short-duration sampling. Selection of an appropriate time to measure an exposure peak through integrated sampling is problematic, and short-duration time-weighted average (TWA) values obtained with integrated sampling are not likely to accurately determine actual peak concentrations attained when concentrations fluctuate rapidly. Laboratory analysis for integrated exposure samples is preferred from a certainty standpoint over results derived in the field from a sensor, as a sensor user typically must overcome specificity issues and a number of potential interfering factors to obtain similarly reliable data. However, sensors are currently needed to measure intra-exposure period concentration variations (i.e., exposure peaks). In this article, the digitized signal from a photoionization detector (PID) sensor triggered collection of whole-air samples when toluene or trichloroethylene vapors attained pre-determined levels in a laboratory atmosphere generation system. Analysis by gas chromatography-mass spectrometry of whole-air samples (with both 37 and 80% relative humidity) collected using the triggering mechanism with rapidly increasing vapor concentrations showed good agreement with the triggering set point values. Whole-air samples (80% relative humidity) in canisters demonstrated acceptable 17-day storage recoveries, and acceptable precision and bias were obtained. The ability to determine exceedance of a ceiling or peak exposure standard by laboratory analysis of an instantaneously collected sample, and to simultaneously provide a calibration point to verify the correct operation of a sensor was demonstrated. This latter detail may increase the confidence in reliability of sensor data obtained across an entire exposure period.

  13. Using Unmanned Helicopters to Assess Vegetation Cover in Sagebrush Steppe Ecosystems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Robert P. Breckenridge; Maxine Dakins; Stephen Bunting

    2012-07-01

    Evaluating vegetation cover is an important factor in understanding the sustainability of many ecosystems. Methods that have sufficient accuracy and improved cost efficiency could dramatically alter how biotic resources are monitored on both public and private lands. This will be of interest to land managers because there are rarely enough resource specialists or funds available for comprehensive ground evaluations. In this project, unmanned helicopters were used to collect still-frame imagery to assess vegetation cover during May, June, and July in 2005. The images were used to estimate percent cover for six vegetative cover classes (shrub, dead shrub, grass, forbs, litter,more » and bare ground). The field plots were located on the INL site west of Idaho Falls, Idaho. Ocular assessments of digital imagery were performed using a software program called SamplePoint, and the results were compared against field measurements collected using a point-frame method to assess accuracy. The helicopter imagery evaluation showed a high degree of agreement with field cover class values for litter, bare ground, and grass, and reasonable agreement for dead shrubs. Shrub cover was often overestimated and forbs were generally underestimated. The helicopter method took 45% less time than the field method to set plots and collect and analyze data. This study demonstrates that UAV technology provides a viable method for monitoring vegetative cover on rangelands in less time and with lower costs. Tradeoffs between cost and accuracy are critical management decisions that are important when managing vegetative conditions across vast sagebrush ecosystems throughout the Intermountain West.« less

  14. Capturing volcanic plumes in 3D with UAV-based photogrammetry at Yasur Volcano - Vanuatu

    NASA Astrophysics Data System (ADS)

    Gomez, C.; Kennedy, B.

    2018-01-01

    As a precise volume of volcanic ash-plume is essential to understand the dynamic of gas emission, exchanges and the eruptive dynamics, we have measured in 3D using photogrammetry a small-size volcanic plume at the summit of Yasur Volcano, Vanuatu. The objective was to collect the altitude and planform shape of the plume as well as the vertical variations of the shape and size. To reach this objective, the authors have used the Structure from Motion photogrammetric method applied to a series of photographs captured in a very short period of time around and above the plume. A total of 146 photographs at 3000 × 4000 pixel were collected as well as the geolocation, the pitch, tilt and orientation of the cameras. The results revealed a "mushroom"-like shape of the plume with a narrow ascending column topped by a turbulent mixing zone. The volume of the plume was calculated to be 13,430 m3 ± 512 m3 (with the error being the cube of the linear error from the Ground Control Points) for a maximum height above the terrain of 63 m. The included error was also kept high because of the irregular distribution of the Ground Control Points that could not be collected in dangerous areas due to the ongoing eruption. Based on this research, it is therefore worth investigating the usage of multiple cameras to capture plumes in 3D over time and the method is also a good complement to the recent development of photogrammetry from space, which can tackle larger-scale eruption plumes.

  15. Longitudinal Study of Daily Hassles in Adolescents in Arab Muslim Immigrant Families

    PubMed Central

    Templin, Thomas N.; Hough, Edythe S.

    2013-01-01

    This study investigated which daily hassles (i.e., Parent, School, Peer, Neighborhood, and Resource) were perceived by Arab Muslim immigrant adolescents as most stressful over a three-year time period and according to child's gender and mother's immigration status (i.e., refugee or non refugee). Data were collected at three time points during adolescence and analyzed using doubly multivariate analysis of covariance (MANCOVA) with linear and quadratic trends. School and Parent hassles were greater than other hassles at every time point. Main effects of time, immigration status, and father's employment, but not child's gender, were statistically significant. School and Parent hassles increased while Peer and Resource hassles decreased over time. Adolescents with refugee mothers reported greater School and Neighborhood and fewer Parent hassles than those with non refugee mothers. Adolescents with unemployed fathers reported significantly more School and Neighborhood hassles. Study findings identify two at risk subgroups: those adolescents with refugee mothers and/or those adolescents with unemployed fathers; and pinpoint problematic daily hassles. Additional research is needed to explore vicarious trauma effects as a potential underlying reason for the pattern of daily hassles noted in adolescents with refugee mothers. PMID:23430463

  16. Seventy years of stream‐fish collections reveal invasions and native range contractions in an Appalachian (USA) watershed

    USGS Publications Warehouse

    Buckwalter, Joseph D.; Frimpong, Emmanuel A.; Angermeier, Paul L.; Barney, Jacob N.

    2018-01-01

    AimKnowledge of expanding and contracting ranges is critical for monitoring invasions and assessing conservation status, yet reliable data on distributional trends are lacking for most freshwater species. We developed a quantitative technique to detect the sign (expansion or contraction) and functional form of range‐size changes for freshwater species based on collections data, while accounting for possible biases due to variable collection effort. We applied this technique to quantify stream‐fish range expansions and contractions in a highly invaded river system.LocationUpper and middle New River (UMNR) basin, Appalachian Mountains, USA.MethodsWe compiled a 77‐year stream‐fish collections dataset partitioned into ten time periods. To account for variable collection effort among time periods, we aggregated the collections into 100 watersheds and expressed a species’ range size as detections per watershed (HUC) sampled (DPHS). We regressed DPHS against time by species and used an information‐theoretic approach to compare linear and nonlinear functional forms fitted to the data points and to classify each species as spreader, stable or decliner.ResultsWe analysed changes in range size for 74 UMNR fishes, including 35 native and 39 established introduced species. We classified the majority (51%) of introduced species as spreaders, compared to 31% of natives. An exponential functional form fits best for 84% of spreaders. Three natives were among the most rapid spreaders. All four decliners were New River natives.Main conclusionsOur DPHS‐based approach facilitated quantitative analyses of distributional trends for stream fishes based on collections data. Partitioning the dataset into multiple time periods allowed us to distinguish long‐term trends from population fluctuations and to examine nonlinear forms of spread. Our framework sets the stage for further study of drivers of stream‐fish invasions and declines in the UMNR and is widely transferable to other freshwater taxa and geographic regions.

  17. Graz kHz SLR LIDAR: first results

    NASA Astrophysics Data System (ADS)

    Kirchner, Georg; Koidl, Franz; Kucharski, Daniel; Pachler, Walther; Seiss, Matthias; Leitgeb, Erich

    2009-05-01

    The Satellite Laser Ranging (SLR) Station Graz is measuring routinely distances to satellites with a 2 kHz laser, achieving an accuracy of 2-3 mm. Using this available equipment, we developed - and added as a byproduct - a kHz SLR LIDAR for the Graz station: Photons of each transmitted laser pulse are backscattered from clouds, atmospheric layers, aircraft vapor trails etc. An additional 10 cm diameter telescope - installed on our main telescope mount - and a Single- Photon Counting Module (SPCM) detect these photons. Using an ISA-Bus based FPGA card - developed in Graz for the kHz SLR operation - these detection times are stored with 100 ns resolution (15 m slots in distance). Event times of any number of laser shots can be accumulated in up to 4096 counters (according to > 60 km distance). The LIDAR distances are stored together with epoch time and telescope pointing information; any reflection point is therefore determined with 3D coordinates, with 15 m resolution in distance, and with the angular precision of the laser telescope pointing. First test results to clouds in full daylight conditions - accumulating up to several 100 laser shots per measurement - yielded high LIDAR data rates (> 100 points per second) and excellent detection of clouds (up to 10 km distance at the moment). Our ultimate goal is to operate the LIDAR automatically and in parallel with the standard SLR measurements, during day and night, collecting LIDAR data as a byproduct, and without any additional expenses.

  18. 40 CFR 51.35 - How can my state equalize the emission inventory effort from year to year?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... approach: (1) Each year, collect and report data for all Type A (large) point sources (this is required for all Type A point sources). (2) Each year, collect data for one-third of your sources that are not Type... save 3 years of data and then report all emissions from the sources that are not Type A point sources...

  19. 40 CFR 51.35 - How can my state equalize the emission inventory effort from year to year?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... approach: (1) Each year, collect and report data for all Type A (large) point sources (this is required for all Type A point sources). (2) Each year, collect data for one-third of your sources that are not Type... save 3 years of data and then report all emissions from the sources that are not Type A point sources...

  20. 40 CFR 51.35 - How can my state equalize the emission inventory effort from year to year?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... approach: (1) Each year, collect and report data for all Type A (large) point sources (this is required for all Type A point sources). (2) Each year, collect data for one-third of your sources that are not Type... save 3 years of data and then report all emissions from the sources that are not Type A point sources...

  1. Comparison of Saliva Collection Methods for the Determination of Salivary Cortisol Levels in Rhesus Macaques (Macaca mulatta), Cynomolgus Macaques (Macaca fascicularis), and African Green Monkeys (Chlorocebus aethiops)

    PubMed Central

    Rapp-Santos, Kamala J; Altamura, Louis A; Norris, Sarah L; Lugo-Roman, Luis A; Rico, Pedro J; Hofer, Christian C

    2017-01-01

    The ability to quickly and accurately determine cortisol as a biomarker for stress is a valuable tool in assessing the wellbeing of NHP. In this study, 2 methods of collecting saliva (a commercial collection device and passive drool) and the resulting free salivary cortisol levels were compared with total serum cortisol concentration in rhesus macaques (Macaca mulatta), cynomolgus macaques (Macaca fascicularis) and African green monkeys (Chlorocebus aethiops) at 2 collection time points. Serum and salivary cortisol levels were determined using a competitive quantitative ELISA. In addition, both saliva collection methods were evaluated for volume collected and ease of use. Compared with passive drool, the experimental collection device was more reliable in collecting sufficient volumes of saliva, and the resulting salivary cortisol values demonstrated stronger correlation with serum cortisol concentration in all species and collection days except cynomolgus macaques on day 1. This saliva collection device allows quick and reliable sample collection for the determination of salivary cortisol levels. In addition, the results might provide a useful tool for evaluating hypothalamic-pituitary-adrenal axis activity or the physiologic stress reaction in NHP as well as a biomarker of psychologic stress states in a variety of situations. PMID:28315649

  2. Nonuniform multiview color texture mapping of image sequence and three-dimensional model for faded cultural relics with sift feature points

    NASA Astrophysics Data System (ADS)

    Li, Na; Gong, Xingyu; Li, Hongan; Jia, Pengtao

    2018-01-01

    For faded relics, such as Terracotta Army, the 2D-3D registration between an optical camera and point cloud model is an important part for color texture reconstruction and further applications. This paper proposes a nonuniform multiview color texture mapping for the image sequence and the three-dimensional (3D) model of point cloud collected by Handyscan3D. We first introduce nonuniform multiview calibration, including the explanation of its algorithm principle and the analysis of its advantages. We then establish transformation equations based on sift feature points for the multiview image sequence. At the same time, the selection of nonuniform multiview sift feature points is introduced in detail. Finally, the solving process of the collinear equations based on multiview perspective projection is given with three steps and the flowchart. In the experiment, this method is applied to the color reconstruction of the kneeling figurine, Tangsancai lady, and general figurine. These results demonstrate that the proposed method provides an effective support for the color reconstruction of the faded cultural relics and be able to improve the accuracy of 2D-3D registration between the image sequence and the point cloud model.

  3. Trends in the salience of data collected in a multi user virtual environment: An exploratory study

    NASA Astrophysics Data System (ADS)

    Tutwiler, M. Shane

    In this study, by exploring patterns in the degree of physical salience of the data the students collected, I investigated the relationship between the level of students' tendency to frame explanations in terms of complex patterns and evidence of how they attend to and select data in support of their developing understandings of causal relationships. I accomplished this by analyzing longitudinal data collected as part of a larger study of 143 7th grade students (clustered within 36 teams, 5 teachers, and 2 schools in the same Northeastern school district) as they navigated and collected data in an ecosystems-based multi-user virtual environment curriculum known as the EcoMUVE Pond module (Metcalf, Kamarainen, Tutwiler, Grotzer, Dede, 2011) . Using individual growth modeling (Singer & Willett, 2003) I found no direct link between student pre-intervention tendency to offer explanations containing complex causal components and patterns of physical salience-driven data collection (average physical salience level, number of low physical salience data points collected, and proportion of low physical salience data points collected), though prior science content knowledge did affect the initial status and rate of change of outcomes in the average physical salience level and proportion of low physical salience data collected over time. The findings of this study suggest two issues for consideration about the use of MUVEs to study student data collection behaviors in complex spaces. Firstly, the structure of the curriculum in which the MUVE is embedded might have a direct effect on what types of data students choose to collect. This undercuts our ability to make inferences about student-driven decisions to collect specific types of data, and suggests that a more open-ended curricular model might be better suited to this type of inquiry. Secondly, differences between teachers' choices in how to facilitate the units likely contribute to the variance in student data collection behaviors between students with different teachers. This foreshadows external validity issues in studies that use behaviors of students within a single class to develop "detectors" of student latent traits (e.g., Baker, Corbett, Roll, Koedinger, 2008).

  4. Drive by Soil Moisture Measurement: A Citizen Science Project

    NASA Astrophysics Data System (ADS)

    Senanayake, I. P.; Willgoose, G. R.; Yeo, I. Y.; Hancock, G. R.

    2017-12-01

    Two of the common attributes of soil moisture are that at any given time it varies quite markedly from point to point, and that there is a significant deterministic pattern that underlies this spatial variation and which is typically 50% of the spatial variability. The spatial variation makes it difficult to determine the time varying catchment average soil moisture using field measurements because any individual measurement is unlikely to be equal to the average for the catchment. The traditional solution to this is to make many measurements (e.g. with soil moisture probes) spread over the catchment, which is very costly and manpower intensive, particularly if we need a time series of soil moisture variation across a catchment. An alternative approach, explored in this poster is to use the deterministic spatial pattern of soil moisture to calibrate one site (e.g. a permanent soil moisture probe at a weather station) to the spatial pattern of soil moisture over the study area. The challenge is then to determine the spatial pattern of soil moisture. This poster will present results from a proof of concept project, where data was collected by a number of undergraduate engineering students, to estimate the spatial pattern. The approach was to drive along a series of roads in a catchment and collect soil moisture measurements at the roadside using field portable soil moisture probes. This drive was repeated a number of times over the semester, and the time variation and spatial persistence of the soil moisture pattern were examined. Provided that the students could return to exactly the same location on each collection day there was a strong persistent pattern in the soil moisture, even while the average soil moisture varied temporally as a result of preceding rainfall. The poster will present results and analysis of the student data, and compare these results with several field sites where we have spatially distributed permanently installed soil moisture probes. The poster will also outline an experimental design, based on our experience, that will underpin a proposed citizen science project involving community environment and farming groups, and high school students.

  5. Expression analysis of selected classes of circulating exosomal miRNAs in soccer players as an indicator of adaptation to physical activity

    PubMed Central

    Jastrzębski, Zbigniew; Kiszałkiewicz, Justyna; Brzeziański, Michał; Pastuszak-Lewandoska, Dorota; Radzimińki, Łukasz; Brzeziańska-Lasota, Ewa; Jegier, Anna

    2017-01-01

    Recently studies have shown that, depending on the type of training and its duration, the expression levels of selected circulating myomiRNAs (c-miR-27a,b, c-miR-29a,b,c, c-miR-133a) differ and correlate with the physiological indicators of adaptation to physical activity. To analyse the expression of selected classes of miRNAs in soccer players during different periods of their training cycle. The study involved 22 soccer players aged 17-18 years. The multi-stage 20-m shuttle run test was used to estimate VO2 max among the soccer players. Samples serum were collected at baseline (time point I), after one week (time point II), and after 2 months of training (time point III). The analysis of the relative quantification (RQ) level of three exosomal myomiRNAs, c-miRNA-27b, c-miR-29a, and c-miR-133, was performed by quantitative polymerase chain reaction (qPCR) at three time points – before the training, after 1 week of training and after the completion of two months of competition season training. The expression analysis showed low expression levels (according to references) of all evaluated myomiRNAs before the training cycle. Analysis performed after a week of the training cycle and after completion of the entire training cycle showed elevated expression of all tested myomiRNAs. Statistical analysis revealed significant differences between the first and the second time point in soccer players for c-miR-27b and c-miR-29a; between the first and the third time point for c-miR-27b and c-miR-29a; and between the second and the third time point for c-miR-27b. Statistical analysis showed a positive correlation between the levels of c-miR-29a and VO2 max. Two months of training affected the expression of c-miR-27b and miR-29a in soccer players. The increased expression of c-miR-27b and c-miR-29 with training could indicate their probable role in the adaptation process that takes place in the muscular system. Possibly, the expression of c-miR-29a will be found to be involved in cardiorespiratory fitness in future research. PMID:29472735

  6. Counselor Assessments of Training and Adoption Barriers

    PubMed Central

    Bartholomew, Norma G.; Joe, George W.; Rowan-Szal, Grace A.; Simpson, D. Dwayne

    2007-01-01

    The prevailing emphasis on adoption of evidence-based practices suggests more focused training evaluations are needed that capture factors in clinician decisions to use new techniques. This includes relationships of post-conference evaluations with subsequent adoption of training materials. Training assessments were therefore collected at two time points from substance abuse treatment counselors who attended training on dual diagnosis and on therapeutic alliance as part of a state-sponsored conference. Customized evaluations were collected to assess counselor perceptions of training quality, relevance, and resources in relation to its utilization during the 6 months following the conference. Higher ratings for relevance of training concepts and materials to service needs of clients, desire to have additional training, and level of program support were each related to greater trial usage during the follow-up period. Primary resource-related and procedural barriers cited by counselors included lack of time and redundancy with existing practices. PMID:17434707

  7. Anomalous Transport of High Energy Cosmic Rays in Galactic Superbubbles

    NASA Technical Reports Server (NTRS)

    Barghouty, Nasser F.

    2014-01-01

    High-energy cosmic rays may exhibit anomalous transport as they traverse and are accelerated by a collection of supernovae explosions in a galactic superbubble. Signatures of this anomalous transport can show up in the particles' evolution and their spectra. In a continuous-time-random- walk (CTRW) model assuming standard diffusive shock acceleration theory (DSA) for each shock encounter, and where the superbubble (an OB stars association) is idealized as a heterogeneous region of particle sources and sinks, acceleration and transport in the superbubble can be shown to be sub-diffusive. While the sub-diffusive transport can be attributed to the stochastic nature of the acceleration time according to DSA theory, the spectral break appears to be an artifact of transport in a finite medium. These CTRW simulations point to a new and intriguing phenomenon associated with the statistical nature of collective acceleration of high energy cosmic rays in galactic superbubbles.

  8. Relations over Time among Children's Shyness, Emotionality, and Internalizing Problems.

    PubMed

    Eggum, Natalie D; Eisenberg, Nancy; Reiser, Mark; Spinrad, Tracy L; Michalik, Nicole M; Valiente, Carlos; Liew, Jeffrey; Sallquist, Julie

    2012-02-01

    Data regarding children's shyness and emotionality were collected at three time points, two years apart (T1: N = 214, M = 6.12 years; T2: N = 185, M = 7.67 years; T3: N = 185, M = 9.70 years), and internalizing data were collected at T1 and T3. Relations among parent-rated shyness, emotionality (parent- and teacher-rated anger, sadness, and positive emotional intensity [EI]), and mother-rated internalizing were examined in panel models. In some cases, shyness predicted emotionality two years later (teacher-rated anger, parent-rated sadness, teacher-rated positive EI) and emotionality sometimes predicted shyness two years later (teacher-rated sadness, parent-rated positive EI, teacher-rated positive EI). Parent-rated shyness and/or emotionality (parent-rated anger and parent-rated sadness) predicted internalizing at T3. Results shed light on developmental relations between emotionality and shyness, as well as processes of risk for, or protection against, the development of internalizing problems.

  9. Pion-Kaon correlations in central Au+Au collisions at square root [sNN] = 130 GeV.

    PubMed

    Adams, J; Adler, C; Aggarwal, M M; Ahammed, Z; Amonett, J; Anderson, B D; Anderson, M; Arkhipkin, D; Averichev, G S; Badyal, S K; Balewski, J; Barannikova, O; Barnby, L S; Baudot, J; Bekele, S; Belaga, V V; Bellwied, R; Berger, J; Bezverkhny, B I; Bhardwaj, S; Bhaskar, P; Bhati, A K; Bichsel, H; Billmeier, A; Bland, L C; Blyth, C O; Bonner, B E; Botje, M; Boucham, A; Brandin, A; Bravar, A; Cadman, R V; Cai, X Z; Caines, H; Calderón de la Barca Sánchez, M; Carroll, J; Castillo, J; Castro, M; Cebra, D; Chaloupka, P; Chattopadhyay, S; Chen, H F; Chen, Y; Chernenko, S P; Cherney, M; Chikanian, A; Choi, B; Christie, W; Coffin, J P; Cormier, T M; Cramer, J G; Crawford, H J; Das, D; Das, S; Derevschikov, A A; Didenko, L; Dietel, T; Dong, X; Draper, J E; Du, F; Dubey, A K; Dunin, V B; Dunlop, J C; Dutta Majumdar, M R; Eckardt, V; Efimov, L G; Emelianov, V; Engelage, J; Eppley, G; Erazmus, B; Fachini, P; Faine, V; Faivre, J; Fatemi, R; Filimonov, K; Filip, P; Finch, E; Fisyak, Y; Flierl, D; Foley, K J; Fu, J; Gagliardi, C A; Ganti, M S; Gutierrez, T D; Gagunashvili, N; Gans, J; Gaudichet, L; Germain, M; Geurts, F; Ghazikhanian, V; Ghosh, P; Gonzalez, J E; Grachov, O; Grigoriev, V; Gronstal, S; Grosnick, D; Guedon, M; Guertin, S M; Gupta, A; Gushin, E; Hallman, T J; Hardtke, D; Harris, J W; Heinz, M; Henry, T W; Heppelmann, S; Herston, T; Hippolyte, B; Hirsch, A; Hjort, E; Hoffmann, G W; Horsley, M; Huang, H Z; Huang, S L; Humanic, T J; Igo, G; Ishihara, A; Jacobs, P; Jacobs, W W; Janik, M; Johnson, I; Jones, P G; Judd, E G; Kabana, S; Kaneta, M; Kaplan, M; Keane, D; Kiryluk, J; Kisiel, A; Klay, J; Klein, S R; Klyachko, A; Koetke, D D; Kollegger, T; Konstantinov, A S; Kopytine, M; Kotchenda, L; Kovalenko, A D; Kramer, M; Kravtsov, P; Krueger, K; Kuhn, C; Kulikov, A I; Kumar, A; Kunde, G J; Kunz, C L; Kutuev, R Kh; Kuznetsov, A A; Lamont, M A C; Landgraf, J M; Lange, S; Lansdell, C P; Lasiuk, B; Laue, F; Lauret, J; Lebedev, A; Lednický, R; Leontiev, V M; LeVine, M J; Li, C; Li, Q; Lindenbaum, S J; Lisa, M A; Liu, F; Liu, L; Liu, Z; Liu, Q J; Ljubicic, T; Llope, W J; Long, H; Longacre, R S; Lopez-Noriega, M; Love, W A; Ludlam, T; Lynn, D; Ma, J; Ma, Y G; Magestro, D; Mahajan, S; Mangotra, L K; Mahapatra, D P; Majka, R; Manweiler, R; Margetis, S; Markert, C; Martin, L; Marx, J; Matis, H S; Matulenko, Yu A; McShane, T S; Meissner, F; Melnick, Yu; Meschanin, A; Messer, M; Miller, M L; Milosevich, Z; Minaev, N G; Mironov, C; Mishra, D; Mitchell, J; Mohanty, B; Molnar, L; Moore, C F; Mora-Corral, M J; Morozov, V; de Moura, M M; Munhoz, M G; Nandi, B K; Nayak, S K; Nayak, T K; Nelson, J M; Nevski, P; Nikitin, V A; Nogach, L V; Norman, B; Nurushev, S B; Odyniec, G; Ogawa, A; Okorokov, V; Oldenburg, M; Olson, D; Paic, G; Pandey, S U; Pal, S K; Panebratsev, Y; Panitkin, S Y; Pavlinov, A I; Pawlak, T; Perevoztchikov, V; Peryt, W; Petrov, V A; Phatak, S C; Picha, R; Planinic, M; Pluta, J; Porile, N; Porter, J; Poskanzer, A M; Potekhin, M; Potrebenikova, E; Potukuchi, B V K S; Prindle, D; Pruneau, C; Putschke, J; Rai, G; Rakness, G; Raniwala, R; Raniwala, S; Ravel, O; Ray, R L; Razin, S V; Reichhold, D; Reid, J G; Renault, G; Retiere, F; Ridiger, A; Ritter, H G; Roberts, J B; Rogachevski, O V; Romero, J L; Rose, A; Roy, C; Ruan, L J; Rykov, V; Sahoo, R; Sakrejda, I; Salur, S; Sandweiss, J; Savin, I; Schambach, J; Scharenberg, R P; Schmitz, N; Schroeder, L S; Schweda, K; Seger, J; Seliverstov, D; Seyboth, P; Shahaliev, E; Shao, M; Sharma, M; Shestermanov, K E; Shimanskii, S S; Singaraju, R N; Simon, F; Skoro, G; Smirnov, N; Snellings, R; Sood, G; Sorensen, P; Sowinski, J; Spinka, H M; Srivastava, B; Stanislaus, S; Stock, R; Stolpovsky, A; Strikhanov, M; Stringfellow, B; Struck, C; Suaide, A A P; Sugarbaker, E; Suire, C; Sumbera, M; Surrow, B; Symons, T J M; Szanto de Toledo, A; Szarwas, P; Tai, A; Takahashi, J; Tang, A H; Thein, D; Thomas, J H; Tikhomirov, V; Tokarev, M; Tonjes, M B; Trainor, T A; Trentalange, S; Tribble, R E; Trivedi, M D; Trofimov, V; Tsai, O; Ullrich, T; Underwood, D G; Van Buren, G; VanderMolen, A M; Vasiliev, A N; Vasiliev, M; Vigdor, S E; Viyogi, Y P; Voloshin, S A; Waggoner, W; Wang, F; Wang, G; Wang, X L; Wang, Z M; Ward, H; Watson, J W; Wells, R; Westfall, G D; Whitten, C; Wieman, H; Willson, R; Wissink, S W; Witt, R; Wood, J; Wu, J; Xu, N; Xu, Z; Xu, Z Z; Yakutin, A E; Yamamoto, E; Yang, J; Yepes, P; Yurevich, V I; Zanevski, Y V; Zborovský, I; Zhang, H; Zhang, H Y; Zhang, W M; Zhang, Z P; Zołnierczuk, P A; Zoulkarneev, R; Zoulkarneeva, J; Zubarev, A N

    2003-12-31

    Pion-kaon correlation functions are constructed from central Au+Au STAR data taken at sqrt[s(NN)]=130 GeV by the STAR detector at the Relativistic Heavy Ion Collider (RHIC). The results suggest that pions and kaons are not emitted at the same average space-time point. Space-momentum correlations, i.e., transverse flow, lead to a space-time emission asymmetry of pions and kaons that is consistent with the data. This result provides new independent evidence that the system created at RHIC undergoes a collective transverse expansion.

  10. Collection and recycling of electronic scrap: A worldwide overview and comparison with the Brazilian situation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Reis de Oliveira, Camila, E-mail: Camilareis.oliveira@hotmail.com; Moura Bernardes, Andrea, E-mail: amb@ufrgs.br; Gerbase, Annelise Engel, E-mail: agerbase@ufrgs.br

    Highlights: Black-Right-Pointing-Pointer Review of the different e-waste collection systems and recycling processes. Black-Right-Pointing-Pointer We present the e-waste collection systems used in Europe and in the US. Black-Right-Pointing-Pointer We present e-waste collection systems used in Asia and Latin America. Black-Right-Pointing-Pointer E-waste management between developed and developing countries is very different. Black-Right-Pointing-Pointer We made a comparison of the world situation to the current Brazilian reality. - Abstract: Recycling and the related issue of sustainable development are increasing in importance around the world. In Brazil, the new National Policy on Solid Wastes has prompted discussion on the future of electronic waste (e-waste). Overmore » the last 10 years, different e-waste collection systems and recycling processes have been applied globally. This paper presents the systems used in different countries and compares the world situation to the current Brazilian reality. To establish a recycling process, it is necessary to organize efficient collection management. The main difficulty associated with the implementation of e-waste recycling processes in Brazil is the collection system, as its efficiency depends not only on the education and cooperation of the people but also on cooperation among industrial waste generators, distributors and the government. Over half a million waste pickers have been reported in Brazil and they are responsible for the success of metal scrap collection in the country. The country also has close to 2400 companies and cooperatives involved in recycling and scrap trading. On the other hand, the collection and recycling of e-waste is still incipient because e-wastes are not seen as valuable in the informal sector. The Brazilian challenge is therefore to organize a system of e-waste management including the informal sector without neglecting environmentally sound management principles.« less

  11. DTI study of Children with Congenital Hydrocephalus: 1 Year Post-Surgical Outcomes

    PubMed Central

    Mangano, Francesco T.; Altaye, Mekibib; McKinstry, Robert C.; Shimony, Joshua S.; Powell, Stephanie K.; Phillips, Jannel M.; Barnard, Holly; Limbrick, David D.; Holland, Scott K.; Jones, Blaise V.; Dodd, Jonathon; Simpson, Sarah; Deanna, Mercer; Rajagopal, Akila; Bidwell, Sarah; Yuan, Weihong

    2016-01-01

    Object To investigate white matter structural abnormalities using diffusion tensor imaging (DTI) in children with hydrocephalus before CSF diversionary surgery (including ventriculoperitoneal shunting and endoscopic third ventriculoscopy) and the course of recovery post-surgery in association with neuropsychological and behavioral outcome. Methods This was a prospective study that included 54 children with congenital hydrocephalus (21F/33M; age range: 0.03–194.5 months) who underwent surgery and 64 normal controls (30F/34M, age range: 0.30–197.75 months). DTI and neurodevelopmental outcome data were collected once in the control group and at pre-surgery, 3-month, and 12-month post-surgery in the patients. DTI measures, including fractional anisotropy (FA), mean diffusivity (MD), axial diffusivity (AD), and radial diffusivity (RD) values were extracted from the genu of corpus callosum (gCC) and the posterior limb of internal capsule (PLIC). Group analysis was performed first cross-sectionally to quantify DTI abnormalities at three time points by comparing the controls and the patients group at the three time points separately. Longitudinal comparisons were conducted pairwise between different time points in patients whose data were acquired at multiple time points. Neurodevelopmental data were collected and analyzed using the Adaptive Behavior Assessment System, Second Edition (ABAS-II) and the Bayley Scales of Infant Development, Third Edition (Bayley-III). Correlation analyses were performed between DTI and behavioral outcomes. Results Significant DTI abnormalities were found in both the gCC (lower FA and higher MD, AD, and RD) and the PLIC (higher FA, lower AD and RD) at pre-surgery. The DTI measures in the gCC remained mostly abnormal at 3-month and 12-month post-surgery. The DTI abnormalities in the PLIC were significant in FA and AD at 3-month post-surgery but did nor persist when tested at 12-month post-surgery. Significant longitudinal DTI changes in the patients were found in the gCC between 3-month and 12-month post-surgery. In the PLIC, trend level longitudinal changes were found between pre-surgery and 3-month post-surgery as well as between 3-month and 12-month post-surgery. Significant correlation between DTI and developmental outcome were found at all three time points. Notably, significant correlation was found between DTI in the PLIC at 3-month post-surgery and developmental outcome at 12-month pots-surgery. Conclusion Our data showed significant WM abnormality based on DTI in both the gCC and the PLIC in children with congenital hydrocephalus before surgery and the abnormalities persisted in both the gCC and the PLIC at 3-month post-surgery. The DTI values remained significantly abnormal in the gCC at 12-month post-surgery. Longitudinal analysis showed signs of recovery in both WM structures between different time points. Combined with the significant correlation found between DTI and neuropsychological outcome, our study suggests that DTI can serve as a sensitive imaging biomarker for underlying neuroanatomical changes and post-surgical developmental outcome and even as a predictor for future outcomes. PMID:27203134

  12. A 30-Min Nucleic Acid Amplification Point-of-Care Test for Genital Chlamydia trachomatis Infection in Women: A Prospective, Multi-center Study of Diagnostic Accuracy.

    PubMed

    Harding-Esch, E M; Cousins, E C; Chow, S-L C; Phillips, L T; Hall, C L; Cooper, N; Fuller, S S; Nori, A V; Patel, R; Thomas-William, S; Whitlock, G; Edwards, S J E; Green, M; Clarkson, J; Arlett, B; Dunbar, J K; Lowndes, C M; Sadiq, S T

    2018-02-01

    Rapid Point-Of-Care Tests for Chlamydia trachomatis (CT) may reduce onward transmission and reproductive sexual health (RSH) sequelae by reducing turnaround times between diagnosis and treatment. The io® single module system (Atlas Genetics Ltd.) runs clinical samples through a nucleic acid amplification test (NAAT)-based CT cartridge, delivering results in 30min. Prospective diagnostic accuracy study of the io® CT-assay in four UK Genito-Urinary Medicine (GUM)/RSH clinics on additional-to-routine self-collected vulvovaginal swabs. Samples were tested "fresh" within 10days of collection, or "frozen" at -80°C for later testing. Participant characteristics were collected to assess risk factors associated with CT infection. CT prevalence was 7.2% (51/709) overall. Sensitivity, specificity, positive and negative predictive values of the io® CT assay were, respectively, 96.1% (95% Confidence Interval (CI): 86.5-99.5), 97.7% (95%CI: 96.3-98.7), 76.6% (95%CI: 64.3-86.2) and 99.7% (95%CI: 98.9-100). The only risk factor associated with CT infection was being a sexual contact of an individual with CT. The io® CT-assay is a 30-min, fully automated, high-performing NAAT currently CE-marked for CT diagnosis in women, making it a highly promising diagnostic to enable specific treatment, initiation of partner notification and appropriately intensive health promotion at the point of care. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

  13. Modeling the Total Dose Radiation Effects of Hg(1-x)Cd(x)Te Photodiodes Using Numerical Device Simulators

    DTIC Science & Technology

    1994-01-01

    Dosimetry : Analysis of dosimetry in two dewar/liquid nitrogen systems. TIME Estimate: One hour for setup, irradiation and TLD reading/analysis. IV...point indicates both electron and hole trapping at the boundary ........................ 12 3.3 Relationship between current and dose for irradiated...peak value. Carriers are collected across the vertical junction within a diffusion length. Since the electron diffusion length is much larger than for

  14. "New Skills and Abilities to Enable Me to Support My Pupils in a Forward Thinking Positive Way:" A Self-Discovery Programme for Teachers in Mainstream School

    ERIC Educational Resources Information Center

    Powell, Lesley; Cheshire, Anna

    2008-01-01

    The purpose of this study is to adapt, deliver, and pilot test the Self-discovery Programme (SDP) for teachers in mainstream school. The study used a pre-test post-test design. Quantitative data were collected by self-administered questionnaires given to teachers at two points in time: baseline (immediately pre-SDP) and immediately post-SDP.…

  15. SAR Ambiguity Study for the Cassini Radar

    NASA Technical Reports Server (NTRS)

    Hensley, Scott; Im, Eastwood; Johnson, William T. K.

    1993-01-01

    The Cassini Radar's synthetic aperture radar (SAR) ambiguity analysis is unique with respect to other spaceborne SAR ambiguity analyses owing to the non-orbiting spacecraft trajectory, asymmetric antenna pattern, and burst mode of data collection. By properly varying the pointing, burst mode timing, and radar parameters along the trajectory this study shows that the signal-to-ambiguity ratio of better than 15 dB can be achieved for all images obtained by the Cassini Radar.

  16. Development of Parameters for the Collection and Analysis of Lidar at Military Munitions Sites

    DTIC Science & Technology

    2010-01-01

    and inertial measurement unit (IMU) equipment is used to locate the sensor in the air . The time of return of the laser signal allows for the...approximately 15 centimeters (cm) on soft ground surfaces and a horizontal accuracy of approximately 60 cm, both compared to surveyed control points...provide more accurate topographic data than other sources, at a reasonable cost compared to alternatives such as ground survey or photogrammetry

  17. Trends in Substance Use among 6th-to 10th-Grade Students from 1998 to 2010: Findings from a National Probability Study

    ERIC Educational Resources Information Center

    Brooks-Russell, Ashley; Farhat, Tilda; Haynie, Denise; Simons-Morton, Bruce

    2014-01-01

    Of the handful of national studies tracking trends in adolescent substance use in the United States, only the Health Behavior in School-Aged Children (HBSC) study collects data from 6th through 10th graders. The purpose of this study was to examine trends from 1998 to 2010 (four time points) in the prevalence of tobacco, alcohol, and marijuana use…

  18. Collecting, Managing, and Visualizing Data during Planetary Surface Exploration

    NASA Astrophysics Data System (ADS)

    Young, K. E.; Graff, T. G.; Bleacher, J. E.; Whelley, P.; Garry, W. B.; Rogers, A. D.; Glotch, T. D.; Coan, D.; Reagan, M.; Evans, C. A.; Garrison, D. H.

    2017-12-01

    While the Apollo lunar surface missions were highly successful in collecting valuable samples to help us understand the history and evolution of the Moon, technological advancements since 1969 point us toward a new generation of planetary surface exploration characterized by large volumes of data being collected and used to inform traverse execution real-time. Specifically, the advent of field portable technologies mean that future planetary explorers will have vast quantities of in situ geochemical and geophysical data that can be used to inform sample collection and curation as well as strategic and tactical decision making that will impact mission planning real-time. The RIS4E SSERVI (Remote, In Situ and Synchrotron Studies for Science and Exploration; Solar System Exploration Research Virtual Institute) team has been working for several years to deploy a variety of in situ instrumentation in relevant analog environments. RIS4E seeks both to determine ideal instrumentation suites for planetary surface exploration as well as to develop a framework for EVA (extravehicular activity) mission planning that incorporates this new generation of technology. Results from the last several field campaigns will be discussed, as will recommendations for how to rapidly mine in situ datasets for tactical and strategic planning. Initial thoughts about autonomy in mining field data will also be presented. The NASA Extreme Environments Mission Operations (NEEMO) missions focus on a combination of Science, Science Operations, and Technology objectives in a planetary analog environment. Recently, the increase of high-fidelity marine science objectives during NEEMO EVAs have led to the ability to evaluate how real-time data collection and visualization can influence tactical and strategic planning for traverse execution and mission planning. Results of the last few NEEMO missions will be discussed in the context of data visualization strategies for real-time operations.

  19. No scanning depth imaging system based on TOF

    NASA Astrophysics Data System (ADS)

    Sun, Rongchun; Piao, Yan; Wang, Yu; Liu, Shuo

    2016-03-01

    To quickly obtain a 3D model of real world objects, multi-point ranging is very important. However, the traditional measuring method usually adopts the principle of point by point or line by line measurement, which is too slow and of poor efficiency. In the paper, a no scanning depth imaging system based on TOF (time of flight) was proposed. The system is composed of light source circuit, special infrared image sensor module, processor and controller of image data, data cache circuit, communication circuit, and so on. According to the working principle of the TOF measurement, image sequence was collected by the high-speed CMOS sensor, and the distance information was obtained by identifying phase difference, and the amplitude image was also calculated. Experiments were conducted and the experimental results show that the depth imaging system can achieve no scanning depth imaging function with good performance.

  20. The effect of dropout on the efficiency of D-optimal designs of linear mixed models.

    PubMed

    Ortega-Azurduy, S A; Tan, F E S; Berger, M P F

    2008-06-30

    Dropout is often encountered in longitudinal data. Optimal designs will usually not remain optimal in the presence of dropout. In this paper, we study D-optimal designs for linear mixed models where dropout is encountered. Moreover, we estimate the efficiency loss in cases where a D-optimal design for complete data is chosen instead of that for data with dropout. Two types of monotonically decreasing response probability functions are investigated to describe dropout. Our results show that the location of D-optimal design points for the dropout case will shift with respect to that for the complete and uncorrelated data case. Owing to this shift, the information collected at the D-optimal design points for the complete data case does not correspond to the smallest variance. We show that the size of the displacement of the time points depends on the linear mixed model and that the efficiency loss is moderate.

  1. Time Reversed Electromagnetics as a Novel Method for Wireless Power Transfer

    NASA Astrophysics Data System (ADS)

    Challa, Anu; Anlage, Steven M.; Tesla Team

    Taking advantage of ray-chaotic enclosures, time reversal has been shown to securely transmit information via short-wavelength waves between two points, yielding noise at all other sites. In this presentation, we propose a method to adapt the signal-focusing technique to electromagnetic signals in order to transmit energy to portable devices. Relying only on the time-reversal invariance properties of waves, the technique is unencumbered by the inversely-proportional-to-distance path loss or precise orientation requirements of its predecessors, making it attractive for power transfer applications. We inject a short microwave pulse into a complex, wave-chaotic chamber and collect the resulting long time-domain signal at a designated transceiver. The signal is then time reversed and emitted from the collection site, collapsing as a time-reversed replica of the initial pulse at the injection site. When amplified, this reconstruction is robust, as measured through metrics of peak-to-peak voltage and energy transfer ratio. We experimentally demonstrate that time reversed collapse can be made on a moving target, and propose a way to selectively target devices through nonlinear time-reversal. University of Maryland Gemstone Team TESLA: Frank Cangialosi, Anu Challa, Tim Furman, Tyler Grover, Patrick Healey, Ben Philip, Brett Potter, Scott Roman, Andrew Simon, Liangcheng Tao, Alex Tabatabai.

  2. More outcomes than trials: a call for consistent data collection across stroke rehabilitation trials.

    PubMed

    Ali, M; English, C; Bernhardt, J; Sunnerhagen, K S; Brady, M

    2013-01-01

    Stroke survivors experience complex combinations of impairments, activity limitations, and participation restrictions. The essential components of stroke rehabilitation remain elusive. Determining efficacy in randomized controlled trials (RCTs) is challenging; there is no commonly agreed primary outcome measure for rehabilitation trials. Clinical guidelines depend on proof of efficacy in RCTs and meta-analyses. However, diverse trial aims, differing methods, inconsistent data collection, and use of multiple assessment tools hinder comparability across trials. Consistent data collection in acute stroke trials has facilitated meta-analyses to inform trial design and clinical practice. With few exceptions, inconsistent data collection has hindered similar progress in stroke rehabilitation research. There is an urgent need for the routine collection of a core dataset of common variables in rehabilitation trials. The European Stroke Organisation Outcomes Working Group, the National Institutes of Neurological Disorders and Stroke Common Data Elements project, and the Collaborative Stroke Audit and Research project have called for consistency in data collection in stroke trials. Standardizing data collection can decrease study start up times, facilitate data sharing, and inform clinical guidelines. Although achieving consensus on which outcome measures to use in stroke rehabilitation trials is a considerable task, perhaps a feasible starting point is to achieve consistency in the collection of data on demography, stroke severity, and stroke onset to inclusion times. Longer term goals could include the development of a consensus process to establish the core dataset. This should be endorsed by researchers, funders, and journal editors in order to facilitate sustainable change. © 2012 The Authors. International Journal of Stroke © 2012 World Stroke Organization.

  3. Seasonal variations in body composition, maximal oxygen uptake, and gas exchange threshold in cross-country skiers.

    PubMed

    Polat, Metin; Korkmaz Eryılmaz, Selcen; Aydoğan, Sami

    2018-01-01

    In order to ensure that athletes achieve their highest performance levels during competitive seasons, monitoring their long-term performance data is crucial for understanding the impact of ongoing training programs and evaluating training strategies. The present study was thus designed to investigate the variations in body composition, maximal oxygen uptake (VO 2max ), and gas exchange threshold values of cross-country skiers across training phases throughout a season. In total, 15 athletes who participate in international cross-country ski competitions voluntarily took part in this study. The athletes underwent incremental treadmill running tests at 3 different time points over a period of 1 year. The first measurements were obtained in July, during the first preparation period; the second measurements were obtained in October, during the second preparation period; and the third measurements were obtained in February, during the competition period. Body weight, body mass index (BMI), body fat (%), as well as VO 2max values and gas exchange threshold, measured using V-slope method during the incremental running tests, were assessed at all 3 time points. The collected data were analyzed using SPSS 20 package software. Significant differences between the measurements were assessed using Friedman's twoway variance analysis with a post hoc option. The athletes' body weights and BMI measurements at the third point were significantly lower compared with the results of the second measurement ( p <0.001). Moreover, the incremental running test time was significantly higher at the third measurement, compared with both the first ( p <0.05) and the second ( p <0.01) measurements. Similarly, the running speed during the test was significantly higher at the third measurement time point compared with the first measurement time point ( p <0.05). Body fat (%), time to reach the gas exchange threshold, running speed at the gas exchange threshold, VO 2max , amount of oxygen consumed at gas exchange threshold level (VO 2GET ), maximal heart rate (HR max ), and heart rate at gas exchange threshold level (HR GET ) values did not significantly differ between the measurement time points ( p >0.05). VO 2max and gas exchange threshold values recorded during the third measurements, the timing of which coincided with the competitive season of the cross-country skiers, did not significantly change, but their incremental running test time and running speed significantly increased while their body weight and BMI significantly decreased. These results indicate that the cross-country skiers developed a tolerance for high-intensity exercise and reached their highest level of athletic performance during the competitive season.

  4. Bird collections in the United States and Canada

    USGS Publications Warehouse

    Banks, R.C.; Clench, M.H.; Barlow, J.C.

    1973-01-01

    This survey was initiated in 1966 as a project of a subcommittee of the A.O.U.'s Committee on Research, at that time chaired by Paul H. Baldwin. The subcommittee consisted of the authors and Ralph J. Raitt. In 1968 the project was separated from the Committee on Research and the temporary Committee on Collections was established, with the present authors as its members. This paper is the final report of the committee.In the past, many studies utilizing museum materials have been handicapped by ignorance of the existence of potentially important specimens. We hoped, by means of this survey, to enable future workers to take full advantage of all available material. The objectives of the survey were to determine the locations of collections of ornithological material with research potential, particularly skins, skeletons, fluid-preserved specimens, eggs, and nests; to assess the sizes and particular geographic or systematic strengths of the various collections; to locate former private collections; to learn what collections include holotypes, and who is responsible for the collections. These basic points are generally well-known for the larger institutions that specialize in maintaining research collections, but not for many smaller collections containing valuable material. The survey was inspired by and patterned after a series made of mammal collections (see Anderson et al. 1963, J. Mammal. 44: 471-500).

  5. ConnectX-2 InfiniBand Management Queues: First Investigation of the New Support for Network Offloaded Collective Operations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Graham, Richard L; Poole, Stephen W; Shamis, Pavel

    2010-01-01

    This paper introduces the newly developed Infini-Band (IB) Management Queue capability, used by the Host Channel Adapter (HCA) to manage network task data flow dependancies, and progress the communications associated with such flows. These tasks include sends, receives, and the newly supported wait task, and are scheduled by the HCA based on a data dependency description provided by the user. This functionality is supported by the ConnectX-2 HCA, and provides the means for delegating collective communication management and progress to the HCA, also known as collective communication offload. This provides a means for overlapping collective communications managed by the HCAmore » and computation on the Central Processing Unit (CPU), thus making it possible to reduce the impact of system noise on parallel applications using collective operations. This paper further describes how this new capability can be used to implement scalable Message Passing Interface (MPI) collective operations, describing the high level details of how this new capability is used to implement the MPI Barrier collective operation, focusing on the latency sensitive performance aspects of this new capability. This paper concludes with small scale benchmark experiments comparing implementations of the barrier collective operation, using the new network offload capabilities, with established point-to-point based implementations of these same algorithms, which manage the data flow using the central processing unit. These early results demonstrate the promise this new capability provides to improve the scalability of high performance applications using collective communications. The latency of the HCA based implementation of the barrier is similar to that of the best performing point-to-point based implementation managed by the central processing unit, starting to outperform these as the number of processes involved in the collective operation increases.« less

  6. Assessing the use of immersive virtual reality, mouse and touchscreen in pointing and dragging-and-dropping tasks among young, middle-aged and older adults.

    PubMed

    Chen, Jiayin; Or, Calvin

    2017-11-01

    This study assessed the use of an immersive virtual reality (VR), a mouse and a touchscreen for one-directional pointing, multi-directional pointing, and dragging-and-dropping tasks involving targets of smaller and larger widths by young (n = 18; 18-30 years), middle-aged (n = 18; 40-55 years) and older adults (n = 18; 65-75 years). A three-way, mixed-factorial design was used for data collection. The dependent variables were the movement time required and the error rate. Our main findings were that the participants took more time and made more errors in using the VR input interface than in using the mouse or the touchscreen. This pattern applied in all three age groups in all tasks, except for multi-directional pointing with a larger target width among the older group. Overall, older adults took longer to complete the tasks and made more errors than young or middle-aged adults. Larger target widths yielded shorter movement times and lower error rates in pointing tasks, but larger targets yielded higher rates of error in dragging-and-dropping tasks. Our study indicated that any other virtual environments that are similar to those we tested may be more suitable for displaying scenes than for manipulating objects that are small and require fine control. Although interacting with VR is relatively difficult, especially for older adults, there is still potential for older adults to adapt to that interface. Furthermore, adjusting the width of objects according to the type of manipulation required might be an effective way to promote performance. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Methods of practice and guidelines for using survey-grade global navigation satellite systems (GNSS) to establish vertical datum in the United States Geological Survey

    USGS Publications Warehouse

    Rydlund, Jr., Paul H.; Densmore, Brenda K.

    2012-01-01

    Geodetic surveys have evolved through the years to the use of survey-grade (centimeter level) global positioning to perpetuate and post-process vertical datum. The U.S. Geological Survey (USGS) uses Global Navigation Satellite Systems (GNSS) technology to monitor natural hazards, ensure geospatial control for climate and land use change, and gather data necessary for investigative studies related to water, the environment, energy, and ecosystems. Vertical datum is fundamental to a variety of these integrated earth sciences. Essentially GNSS surveys provide a three-dimensional position x, y, and z as a function of the North American Datum of 1983 ellipsoid and the most current hybrid geoid model. A GNSS survey may be approached with post-processed positioning for static observations related to a single point or network, or involve real-time corrections to provide positioning "on-the-fly." Field equipment required to facilitate GNSS surveys range from a single receiver, with a power source for static positioning, to an additional receiver or network communicated by radio or cellular for real-time positioning. A real-time approach in its most common form may be described as a roving receiver augmented by a single-base station receiver, known as a single-base real-time (RT) survey. More efficient real-time methods involving a Real-Time Network (RTN) permit the use of only one roving receiver that is augmented to a network of fixed receivers commonly known as Continually Operating Reference Stations (CORS). A post-processed approach in its most common form involves static data collection at a single point. Data are most commonly post-processed through a universally accepted utility maintained by the National Geodetic Survey (NGS), known as the Online Position User Service (OPUS). More complex post-processed methods involve static observations among a network of additional receivers collecting static data at known benchmarks. Both classifications provide users flexibility regarding efficiency and quality of data collection. Quality assurance of survey-grade global positioning is often overlooked or not understood and perceived uncertainties can be misleading. GNSS users can benefit from a blueprint of data collection standards used to ensure consistency among USGS mission areas. A classification of GNSS survey qualities provide the user with the ability to choose from the highest quality survey used to establish objective points with low uncertainties, identified as a Level I, to a GNSS survey for general topographic control without quality assurance, identified as a Level IV. A Level I survey is strictly limited to post-processed methods, whereas Level II, Level III, and Level IV surveys integrate variations of a RT approach. Among these classifications, techniques involving blunder checks and redundancy are important, and planning that involves the assessment of the overall satellite configuration, as well as terrestrial and space weather, are necessary to ensure an efficient and quality campaign. Although quality indicators and uncertainties are identified in post-processed methods using CORS, the accuracy of a GNSS survey is most effectively expressed as a comparison to a local benchmark that has a high degree of confidence. Real-time and post-processed methods should incorporate these "trusted" benchmarks as a check during any campaign. Global positioning surveys are expected to change rapidly in the future. The expansion of continuously operating reference stations, combined with newly available satellite signals, and enhancements to the conterminous geoid, are all sufficient indicators for substantial growth in real-time positioning and quality thereof.

  8. a Fast and Flexible Method for Meta-Map Building for Icp Based Slam

    NASA Astrophysics Data System (ADS)

    Kurian, A.; Morin, K. W.

    2016-06-01

    Recent developments in LiDAR sensors make mobile mapping fast and cost effective. These sensors generate a large amount of data which in turn improves the coverage and details of the map. Due to the limited range of the sensor, one has to collect a series of scans to build the entire map of the environment. If we have good GNSS coverage, building a map is a well addressed problem. But in an indoor environment, we have limited GNSS reception and an inertial solution, if available, can quickly diverge. In such situations, simultaneous localization and mapping (SLAM) is used to generate a navigation solution and map concurrently. SLAM using point clouds possesses a number of computational challenges even with modern hardware due to the shear amount of data. In this paper, we propose two strategies for minimizing the cost of computation and storage when a 3D point cloud is used for navigation and real-time map building. We have used the 3D point cloud generated by Leica Geosystems's Pegasus Backpack which is equipped with Velodyne VLP-16 LiDARs scanners. To improve the speed of the conventional iterative closest point (ICP) algorithm, we propose a point cloud sub-sampling strategy which does not throw away any key features and yet significantly reduces the number of points that needs to be processed and stored. In order to speed up the correspondence finding step, a dual kd-tree and circular buffer architecture is proposed. We have shown that the proposed method can run in real time and has excellent navigation accuracy characteristics.

  9. Validation of electronic systems to collect patient-reported outcome (PRO) data-recommendations for clinical trial teams: report of the ISPOR ePRO systems validation good research practices task force.

    PubMed

    Zbrozek, Arthur; Hebert, Joy; Gogates, Gregory; Thorell, Rod; Dell, Christopher; Molsen, Elizabeth; Craig, Gretchen; Grice, Kenneth; Kern, Scottie; Hines, Sheldon

    2013-06-01

    Outcomes research literature has many examples of high-quality, reliable patient-reported outcome (PRO) data entered directly by electronic means, ePRO, compared to data entered from original results on paper. Clinical trial managers are increasingly using ePRO data collection for PRO-based end points. Regulatory review dictates the rules to follow with ePRO data collection for medical label claims. A critical component for regulatory compliance is evidence of the validation of these electronic data collection systems. Validation of electronic systems is a process versus a focused activity that finishes at a single point in time. Eight steps need to be described and undertaken to qualify the validation of the data collection software in its target environment: requirements definition, design, coding, testing, tracing, user acceptance testing, installation and configuration, and decommissioning. These elements are consistent with recent regulatory guidance for systems validation. This report was written to explain how the validation process works for sponsors, trial teams, and other users of electronic data collection devices responsible for verifying the quality of the data entered into relational databases from such devices. It is a guide on the requirements and documentation needed from a data collection systems provider to demonstrate systems validation. It is a practical source of information for study teams to ensure that ePRO providers are using system validation and implementation processes that will ensure the systems and services: operate reliably when in practical use; produce accurate and complete data and data files; support management control and comply with any existing regulations. Furthermore, this short report will increase user understanding of the requirements for a technology review leading to more informed and balanced recommendations or decisions on electronic data collection methods. Copyright © 2013 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  10. A removal model for estimating detection probabilities from point-count surveys

    USGS Publications Warehouse

    Farnsworth, G.L.; Pollock, K.H.; Nichols, J.D.; Simons, T.R.; Hines, J.E.; Sauer, J.R.

    2002-01-01

    Use of point-count surveys is a popular method for collecting data on abundance and distribution of birds. However, analyses of such data often ignore potential differences in detection probability. We adapted a removal model to directly estimate detection probability during point-count surveys. The model assumes that singing frequency is a major factor influencing probability of detection when birds are surveyed using point counts. This may be appropriate for surveys in which most detections are by sound. The model requires counts to be divided into several time intervals. Point counts are often conducted for 10 min, where the number of birds recorded is divided into those first observed in the first 3 min, the subsequent 2 min, and the last 5 min. We developed a maximum-likelihood estimator for the detectability of birds recorded during counts divided into those intervals. This technique can easily be adapted to point counts divided into intervals of any length. We applied this method to unlimited-radius counts conducted in Great Smoky Mountains National Park. We used model selection criteria to identify whether detection probabilities varied among species, throughout the morning, throughout the season, and among different observers. We found differences in detection probability among species. Species that sing frequently such as Winter Wren (Troglodytes troglodytes) and Acadian Flycatcher (Empidonax virescens) had high detection probabilities (∼90%) and species that call infrequently such as Pileated Woodpecker (Dryocopus pileatus) had low detection probability (36%). We also found detection probabilities varied with the time of day for some species (e.g. thrushes) and between observers for other species. We used the same approach to estimate detection probability and density for a subset of the observations with limited-radius point counts.

  11. User's guide to four-body and three-body trajectory optimization programs

    NASA Technical Reports Server (NTRS)

    Pu, C. L.; Edelbaum, T. N.

    1974-01-01

    A collection of computer programs and subroutines written in FORTRAN to calculate 4-body (sun-earth-moon-space) and 3-body (earth-moon-space) optimal trajectories is presented. The programs incorporate a variable step integration technique and a quadrature formula to correct single step errors. The programs provide capability to solve initial value problem, two point boundary value problem of a transfer from a given initial position to a given final position in fixed time, optimal 2-impulse transfer from an earth parking orbit of given inclination to a given final position and velocity in fixed time and optimal 3-impulse transfer from a given position to a given final position and velocity in fixed time.

  12. An amino acid-electrolyte beverage may increase cellular rehydration relative to carbohydrate-electrolyte and flavored water beverages

    PubMed Central

    2014-01-01

    Background In cases of dehydration exceeding a 2% loss of body weight, athletic performance can be significantly compromised. Carbohydrate and/or electrolyte containing beverages have been effective for rehydration and recovery of performance, yet amino acid containing beverages remain unexamined. Therefore, the purpose of this study is to compare the rehydration capabilities of an electrolyte-carbohydrate (EC), electrolyte-branched chain amino acid (EA), and flavored water (FW) beverages. Methods Twenty men (n = 10; 26.7 ± 4.8 years; 174.3 ± 6.4 cm; 74.2 ± 10.9 kg) and women (n = 10; 27.1 ± 4.7 years; 175.3 ± 7.9 cm; 71.0 ± 6.5 kg) participated in this crossover study. For each trial, subjects were dehydrated, provided one of three random beverages, and monitored for the following three hours. Measurements were collected prior to and immediately after dehydration and 4 hours after dehydration (3 hours after rehydration) (AE = −2.5 ± 0.55%; CE = −2.2 ± 0.43%; FW = −2.5 ± 0.62%). Measurements collected at each time point were urine volume, urine specific gravity, drink volume, and fluid retention. Results No significant differences (p > 0.05) existed between beverages for urine volume, drink volume, or fluid retention for any time-point. Treatment x time interactions existed for urine specific gravity (USG) (p < 0.05). Post hoc analysis revealed differences occurred between the FW and EA beverages (p = 0.003) and between the EC and EA beverages (p = 0.007) at 4 hours after rehydration. Wherein, EA USG returned to baseline at 4 hours post-dehydration (mean difference from pre to 4 hours post-dehydration = -0.0002; p > 0.05) while both EC (-0.0067) and FW (-0.0051) continued to produce dilute urine and failed to return to baseline at the same time-point (p < 0.05). Conclusion Because no differences existed for fluid retention, urine or drink volume at any time point, yet USG returned to baseline during the EA trial, an EA supplement may enhance cellular rehydration rate compared to an EC or FW beverage in healthy men and women after acute dehydration of around 2% body mass loss. PMID:24884613

  13. Time-Lapse Video Microscopy for Assessment of EYFP-Parkin Aggregation as a Marker for Cellular Mitophagy

    PubMed Central

    Di Sante, Gabriele; Casimiro, Mathew C.; Pestell, Timothy G.; Pestell, Richard G.

    2016-01-01

    Time-lapse video microscopy can be defined as the real time imaging of living cells. This technique relies on the collection of images at different time points. Time intervals can be set through a computer interface that controls the microscope-integrated camera. This kind of microscopy requires both the ability to acquire very rapid events and the signal generated by the observed cellular structure during these events. After the images have been collected, a movie of the entire experiment is assembled to show the dynamic of the molecular events of interest. Time-lapse video microscopy has a broad range of applications in the biomedical research field and is a powerful and unique tool for following the dynamics of the cellular events in real time. Through this technique, we can assess cellular events such as migration, division, signal transduction, growth, and death. Moreover, using fluorescent molecular probes we are able to mark specific molecules, such as DNA, RNA or proteins and follow them through their molecular pathways and functions. Time-lapse video microscopy has multiple advantages, the major one being the ability to collect data at the single-cell level, that make it a unique technology for investigation in the field of cell biology. However, time-lapse video microscopy has limitations that can interfere with the acquisition of high quality images. Images can be compromised by both external factors; temperature fluctuations, vibrations, humidity and internal factors; pH, cell motility. Herein, we describe a protocol for the dynamic acquisition of a specific protein, Parkin, fused with the enhanced yellow fluorescent protein (EYFP) in order to track the selective removal of damaged mitochondria, using a time-lapse video microscopy approach. PMID:27168174

  14. Time-Lapse Video Microscopy for Assessment of EYFP-Parkin Aggregation as a Marker for Cellular Mitophagy.

    PubMed

    Di Sante, Gabriele; Casimiro, Mathew C; Pestell, Timothy G; Pestell, Richard G

    2016-05-04

    Time-lapse video microscopy can be defined as the real time imaging of living cells. This technique relies on the collection of images at different time points. Time intervals can be set through a computer interface that controls the microscope-integrated camera. This kind of microscopy requires both the ability to acquire very rapid events and the signal generated by the observed cellular structure during these events. After the images have been collected, a movie of the entire experiment is assembled to show the dynamic of the molecular events of interest. Time-lapse video microscopy has a broad range of applications in the biomedical research field and is a powerful and unique tool for following the dynamics of the cellular events in real time. Through this technique, we can assess cellular events such as migration, division, signal transduction, growth, and death. Moreover, using fluorescent molecular probes we are able to mark specific molecules, such as DNA, RNA or proteins and follow them through their molecular pathways and functions. Time-lapse video microscopy has multiple advantages, the major one being the ability to collect data at the single-cell level, that make it a unique technology for investigation in the field of cell biology. However, time-lapse video microscopy has limitations that can interfere with the acquisition of high quality images. Images can be compromised by both external factors; temperature fluctuations, vibrations, humidity and internal factors; pH, cell motility. Herein, we describe a protocol for the dynamic acquisition of a specific protein, Parkin, fused with the enhanced yellow fluorescent protein (EYFP) in order to track the selective removal of damaged mitochondria, using a time-lapse video microscopy approach.

  15. Mechanism of action of l-CDB-4022, a potential nonhormonal male contraceptive, in the seminiferous epithelium of the rat testis.

    PubMed

    Koduri, Sailaja; Hild, Sheri Ann; Pessaint, Laurent; Reel, Jerry R; Attardi, Barbara J

    2008-04-01

    The present study was conducted to elucidate the possible molecular mechanisms involved in the antispermatogenic activity of l-CDB-4022, an indenopyridine. In this study 45-d-old male Sprague-Dawley rats were treated with a single oral dose of l-CDB-4022 (2.5 mg/kg) or vehicle, and blood and testes were collected at various time points. The rate of body weight gain was not affected, but a significant loss of testes weight was induced by l-CDB-4022. Serum hormones were assayed using specific RIAs or ELISAs, and testicular protein and RNA were analyzed by Western blotting and RT-PCR, respectively. There was a significant decrease in inhibin B and concomitant increase in FSH in serum from l-CDB-4022-treated rats, but serum levels of activin A, testosterone, and LH were unchanged. Western analysis of testicular lysates from l-CDB-4022-treated rats exhibited phosphorylation of ERK1/2 at 4 h and later time points. Loss of nectin/afadin complex occurred at 48 h, but there was an increase in levels of integrin-beta1, N-cadherin, alpha-catenin, and beta-catenin protein at 24 h and later time points. Increase in expression of Fas ligand and Fas receptor was detected 8 and 24 h after l-CDB-4022 treatment. The ratio of the membrane to soluble form of stem cell factor mRNA was decreased. Immunohistochemical analysis of testicular sections indicated a dramatic disruption of the Sertoli cell microtubule network in l-CDB-4022-treated rats. Collectively, these results suggest that l-CDB-4022 activates the MAPK pathway, reduces expression of prosurvival factors such as the membrane form of stem cell factor, alters expression of Sertoli-germ cell adherens junction proteins, disrupts Sertoli cell microtubule structure, and induces the proapoptotic factor, Fas, culminating in germ cell loss from the seminiferous epithelium.

  16. Intensity of Territorial Marking Predicts Wolf Reproduction: Implications for Wolf Monitoring

    PubMed Central

    García, Emilio J.

    2014-01-01

    Background The implementation of intensive and complex approaches to monitor large carnivores is resource demanding, restricted to endangered species, small populations, or small distribution ranges. Wolf monitoring over large spatial scales is difficult, but the management of such contentious species requires regular estimations of abundance to guide decision-makers. The integration of wolf marking behaviour with simple sign counts may offer a cost-effective alternative to monitor the status of wolf populations over large spatial scales. Methodology/Principal Findings We used a multi-sampling approach, based on the collection of visual and scent wolf marks (faeces and ground scratching) and the assessment of wolf reproduction using howling and observation points, to test whether the intensity of marking behaviour around the pup-rearing period (summer-autumn) could reflect wolf reproduction. Between 1994 and 2007 we collected 1,964 wolf marks in a total of 1,877 km surveyed and we searched for the pups' presence (1,497 howling and 307 observations points) in 42 sampling sites with a regular presence of wolves (120 sampling sites/year). The number of wolf marks was ca. 3 times higher in sites with a confirmed presence of pups (20.3 vs. 7.2 marks). We found a significant relationship between the number of wolf marks (mean and maximum relative abundance index) and the probability of wolf reproduction. Conclusions/Significance This research establishes a real-time relationship between the intensity of wolf marking behaviour and wolf reproduction. We suggest a conservative cutting point of 0.60 for the probability of wolf reproduction to monitor wolves on a regional scale combined with the use of the mean relative abundance index of wolf marks in a given area. We show how the integration of wolf behaviour with simple sampling procedures permit rapid, real-time, and cost-effective assessments of the breeding status of wolf packs with substantial implications to monitor wolves at large spatial scales. PMID:24663068

  17. Distribution and biomarkers of carbon-14-labeled fullerene C60 ([(14) C(U)]C60 ) in female rats and mice for up to 30 days after intravenous exposure.

    PubMed

    Sumner, Susan C J; Snyder, Rodney W; Wingard, Christopher; Mortensen, Ninell P; Holland, Nathan A; Shannahan, Jonathan H; Dhungana, Suraj; Pathmasiri, Wimal; Han, Li; Lewin, Anita H; Fennell, Timothy R

    2015-12-01

    A comprehensive distribution study was conducted in female rats and mice exposed to a suspension of uniformly carbon-14-labeled C60 ([(14) C(U)]C60 ). Rodents were administered [(14) C(U)]C60 (~0.9 mg kg(-1) body weight) or 5% polyvinylpyrrolidone-saline vehicle alone via a single tail vein injection. Tissues were collected at 1 h and 1, 7, 14 and 30 days after administration. A separate group of rodents received five daily injections of suspensions of either [(14) C(U)]C60 or vehicle with tissue collection 14 days post exposure. Radioactivity was detected in over 20 tissues at all time points. The highest concentration of radioactivity in rodents at each time point was in liver, lungs and spleen. Elimination of [(14) C(U)]C60 was < 2% in urine and feces at any 24 h time points. [(14) C(U)]C60 and [(14) C(U)]C60 -retinol were detected in liver of rats and together accounted for ~99% and ~56% of the total recovered at 1 and 30 days postexposure, respectively. The blood radioactivity at 1 h after [(14) C(U)]C60 exposure was fourfold higher in rats than in mice; blood radioactivity was still in circulation at 30 days post [(14) C(U)]C60 exposure in both species (<1%). Levels of oxidative stress markers increased by 5 days after exposure and remained elevated, while levels of inflammation markers initially increased and then returned to control values. The level of cardiovascular marker von Willebrand factor, increased in rats, but remained at control levels in mice. This study demonstrates that [(14) C(U)]C60 is retained in female rodents with little elimination by 30 days after i.v. exposure, and leads to systemic oxidative stress. Copyright © 2015 John Wiley & Sons, Ltd.

  18. Set membership experimental design for biological systems.

    PubMed

    Marvel, Skylar W; Williams, Cranos M

    2012-03-21

    Experimental design approaches for biological systems are needed to help conserve the limited resources that are allocated for performing experiments. The assumptions used when assigning probability density functions to characterize uncertainty in biological systems are unwarranted when only a small number of measurements can be obtained. In these situations, the uncertainty in biological systems is more appropriately characterized in a bounded-error context. Additionally, effort must be made to improve the connection between modelers and experimentalists by relating design metrics to biologically relevant information. Bounded-error experimental design approaches that can assess the impact of additional measurements on model uncertainty are needed to identify the most appropriate balance between the collection of data and the availability of resources. In this work we develop a bounded-error experimental design framework for nonlinear continuous-time systems when few data measurements are available. This approach leverages many of the recent advances in bounded-error parameter and state estimation methods that use interval analysis to generate parameter sets and state bounds consistent with uncertain data measurements. We devise a novel approach using set-based uncertainty propagation to estimate measurement ranges at candidate time points. We then use these estimated measurements at the candidate time points to evaluate which candidate measurements furthest reduce model uncertainty. A method for quickly combining multiple candidate time points is presented and allows for determining the effect of adding multiple measurements. Biologically relevant metrics are developed and used to predict when new data measurements should be acquired, which system components should be measured and how many additional measurements should be obtained. The practicability of our approach is illustrated with a case study. This study shows that our approach is able to 1) identify candidate measurement time points that maximize information corresponding to biologically relevant metrics and 2) determine the number at which additional measurements begin to provide insignificant information. This framework can be used to balance the availability of resources with the addition of one or more measurement time points to improve the predictability of resulting models.

  19. Set membership experimental design for biological systems

    PubMed Central

    2012-01-01

    Background Experimental design approaches for biological systems are needed to help conserve the limited resources that are allocated for performing experiments. The assumptions used when assigning probability density functions to characterize uncertainty in biological systems are unwarranted when only a small number of measurements can be obtained. In these situations, the uncertainty in biological systems is more appropriately characterized in a bounded-error context. Additionally, effort must be made to improve the connection between modelers and experimentalists by relating design metrics to biologically relevant information. Bounded-error experimental design approaches that can assess the impact of additional measurements on model uncertainty are needed to identify the most appropriate balance between the collection of data and the availability of resources. Results In this work we develop a bounded-error experimental design framework for nonlinear continuous-time systems when few data measurements are available. This approach leverages many of the recent advances in bounded-error parameter and state estimation methods that use interval analysis to generate parameter sets and state bounds consistent with uncertain data measurements. We devise a novel approach using set-based uncertainty propagation to estimate measurement ranges at candidate time points. We then use these estimated measurements at the candidate time points to evaluate which candidate measurements furthest reduce model uncertainty. A method for quickly combining multiple candidate time points is presented and allows for determining the effect of adding multiple measurements. Biologically relevant metrics are developed and used to predict when new data measurements should be acquired, which system components should be measured and how many additional measurements should be obtained. Conclusions The practicability of our approach is illustrated with a case study. This study shows that our approach is able to 1) identify candidate measurement time points that maximize information corresponding to biologically relevant metrics and 2) determine the number at which additional measurements begin to provide insignificant information. This framework can be used to balance the availability of resources with the addition of one or more measurement time points to improve the predictability of resulting models. PMID:22436240

  20. Quality assurance and quality control for autonomously collected geoscience data

    NASA Astrophysics Data System (ADS)

    Versteeg, R. J.; Richardson, A.; Labrecque, D.

    2006-12-01

    The growing interest in processes, coupled with the reduction in cost and complexity of sensors which allow for continuous data collection and transmission is giving rise to vast amounts of semi autonomously collected data. Such data is typically collected from a range of physical and chemical sensors and transmitted - either at the time of collection, or periodically as a collection of measurements - to a central server. Such setups can collect vast amounts of data. In cases where power is not an issue one datapoint can be collected every minute, resulting in tens of thousands of data points per month per sensor. Especially in cases in which multiple sensors are deployed it is infeasible to examine each individual datapoint for each individual sensor, and users typically will look at aggregates of such data on a periodic (once a week to once every few months) basis. Such aggregates (and the timelag between data collection and data evaluation) will impact the ability to rapidly identify and resolve data issues. Thus, there is a need to integrate data qa/qc rules and procedures in the data collection process. These should be implemented such that data is analyzed for compliance the moment it arrives at the server, and that any issues with this data result in notification of cognizant personnel. Typical issues (encountered in the field) include complete system failure (resulting in no data arriving at all), to complete sensor failure (data is collected, but is meaningless), to partial sensor failure (sensor gives erratic readings, or starts to exhibit a bias) to partial powerloss (system collects and transmits data only intermittently). We have implemented a suite of such rules and tests as part of the INL developed performance monitoring system. These rules are invoked as part of a data qa/qc workflow, and result in quality indicators for each datapoint as well as user alerts in case of issues. Tests which are applied to the data include tests on individual datapoints, tests on suites of datapoints, and tests applied over the whole dataset. Example of tests include: Did data arrive on time, is received data in a valid format, are all measurements present, is data within valid range, is data collected at appropriate time intervals, are the statistics of the data changing over time and is the data collected within an appropriate instrument calibration window? This approach, which is executed automatically on all data provides data end users with confidence and auditability regarding the quality and useability of autonomously collected data.

  1. 40 CFR Table 4 to Subpart IIIii of... - Work Practice Standards-Requirements for Mercury Liquid Collection

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air... point drains, mercury knock-out pots, and other closed mercury collection points a. At least once each...

  2. Position and volume estimation of atmospheric nuclear detonations from video reconstruction

    NASA Astrophysics Data System (ADS)

    Schmitt, Daniel T.

    Recent work in digitizing films of foundational atmospheric nuclear detonations from the 1950s provides an opportunity to perform deeper analysis on these historical tests. This work leverages multi-view geometry and computer vision techniques to provide an automated means to perform three-dimensional analysis of the blasts for several points in time. The accomplishment of this requires careful alignment of the films in time, detection of features in the images, matching of features, and multi-view reconstruction. Sub-explosion features can be detected with a 67% hit rate and 22% false alarm rate. Hotspot features can be detected with a 71.95% hit rate, 86.03% precision and a 0.015% false positive rate. Detected hotspots are matched across 57-109 degree viewpoints with 76.63% average correct matching by defining their location relative to the center of the explosion, rotating them to the alternative viewpoint, and matching them collectively. When 3D reconstruction is applied to the hotspot matching it completes an automated process that has been used to create 168 3D point clouds with 31.6 points per reconstruction with each point having an accuracy of 0.62 meters with 0.35, 0.24, and 0.34 meters of accuracy in the x-, y- and z-direction respectively. As a demonstration of using the point clouds for analysis, volumes are estimated and shown to be consistent with radius-based models and in some cases improve on the level of uncertainty in the yield calculation.

  3. Filtering Raw Terrestrial Laser Scanning Data for Efficient and Accurate Use in Geomorphologic Modeling

    NASA Astrophysics Data System (ADS)

    Gleason, M. J.; Pitlick, J.; Buttenfield, B. P.

    2011-12-01

    Terrestrial laser scanning (TLS) represents a new and particularly effective remote sensing technique for investigating geomorphologic processes. Unfortunately, TLS data are commonly characterized by extremely large volume, heterogeneous point distribution, and erroneous measurements, raising challenges for applied researchers. To facilitate efficient and accurate use of TLS in geomorphology, and to improve accessibility for TLS processing in commercial software environments, we are developing a filtering method for raw TLS data to: eliminate data redundancy; produce a more uniformly spaced dataset; remove erroneous measurements; and maintain the ability of the TLS dataset to accurately model terrain. Our method conducts local aggregation of raw TLS data using a 3-D search algorithm based on the geometrical expression of expected random errors in the data. This approach accounts for the estimated accuracy and precision limitations of the instruments and procedures used in data collection, thereby allowing for identification and removal of potential erroneous measurements prior to data aggregation. Initial tests of the proposed technique on a sample TLS point cloud required a modest processing time of approximately 100 minutes to reduce dataset volume over 90 percent (from 12,380,074 to 1,145,705 points). Preliminary analysis of the filtered point cloud revealed substantial improvement in homogeneity of point distribution and minimal degradation of derived terrain models. We will test the method on two independent TLS datasets collected in consecutive years along a non-vegetated reach of the North Fork Toutle River in Washington. We will evaluate the tool using various quantitative, qualitative, and statistical methods. The crux of this evaluation will include a bootstrapping analysis to test the ability of the filtered datasets to model the terrain at roughly the same accuracy as the raw datasets.

  4. Independent evaluation of point source fossil fuel CO2 emissions to better than 10%

    PubMed Central

    Turnbull, Jocelyn Christine; Keller, Elizabeth D.; Norris, Margaret W.; Wiltshire, Rachael M.

    2016-01-01

    Independent estimates of fossil fuel CO2 (CO2ff) emissions are key to ensuring that emission reductions and regulations are effective and provide needed transparency and trust. Point source emissions are a key target because a small number of power plants represent a large portion of total global emissions. Currently, emission rates are known only from self-reported data. Atmospheric observations have the potential to meet the need for independent evaluation, but useful results from this method have been elusive, due to challenges in distinguishing CO2ff emissions from the large and varying CO2 background and in relating atmospheric observations to emission flux rates with high accuracy. Here we use time-integrated observations of the radiocarbon content of CO2 (14CO2) to quantify the recently added CO2ff mole fraction at surface sites surrounding a point source. We demonstrate that both fast-growing plant material (grass) and CO2 collected by absorption into sodium hydroxide solution provide excellent time-integrated records of atmospheric 14CO2. These time-integrated samples allow us to evaluate emissions over a period of days to weeks with only a modest number of measurements. Applying the same time integration in an atmospheric transport model eliminates the need to resolve highly variable short-term turbulence. Together these techniques allow us to independently evaluate point source CO2ff emission rates from atmospheric observations with uncertainties of better than 10%. This uncertainty represents an improvement by a factor of 2 over current bottom-up inventory estimates and previous atmospheric observation estimates and allows reliable independent evaluation of emissions. PMID:27573818

  5. Expression profiles of differentially regulated genes during the early stages of apple flower infection with Erwinia amylovora

    PubMed Central

    Sarowar, Sujon; Zhao, Youfu; Soria-Guerra, Ruth Elena; Ali, Shahjahan; Zheng, Danman; Wang, Dongping; Korban, Schuyler S.

    2011-01-01

    To identify genes involved in the response to the fire blight pathogen Erwinia amylovora in apple (Malus×domestica), expression profiles were investigated using an apple oligo (70-mer) array representing 40, 000 genes. Blossoms of a fire blight-susceptible apple cultivar Gala were collected from trees growing in the orchard, placed on a tray in the laboratory, and spray-inoculated with a suspension of E. amylovora at a concentration of 108 cfu ml−1. Uninoculated detached flowers served as controls at each time point. Expression profiles were captured at three different time points post-inoculation at 2, 8, and 24 h, together with those at 0 h (uninoculated). A total of about 3500 genes were found to be significantly modulated in response to at least one of the three time points. Among those, a total of 770, 855, and 1002 genes were up-regulated, by 2-fold, at 2, 8, and 24 h following inoculation, respectively; while, 748, 1024, and 1455 genes were down-regulated, by 2-fold, at 2, 8, and 24 h following inoculation, respectively. Over the three time points post-inoculation, 365 genes were commonly up-regulated and 374 genes were commonly down-regulated. Both sets of genes were classified based on their functional categories. The majority of up-regulated genes were involved in metabolism, signal transduction, signalling, transport, and stress response. A number of transcripts encoding proteins/enzymes known to be up-regulated under particular biotic and abiotic stress were also up-regulated following E. amylovora treatment. Those up- or down-regulated genes encode transcription factors, signaling components, defense-related, transporter, and metabolism, all of which have been associated with disease responses in Arabidopsis and rice, suggesting similar response pathways are involved in apple blossoms. PMID:21725032

  6. An Investigation on the Contribution of GLONASS to the Precise Point Positioning for Short Time Observations

    NASA Astrophysics Data System (ADS)

    Ulug, R.; Ozludemir, M. T.

    2016-12-01

    After 2011, through the modernization process of GLONASS, the number of satellites increased rapidly. This progress has made the GLONASS the only fully operational system alternative to GPS in point positioning. So far, many researches have been conducted to investigate the contribution of GLONASS to point positioning considering different methods such as Real Time Kinematic (RTK) and Precise Point Positioning (PPP). The latter one, PPP, is a method that performs precise position determination using a single GNSS receiver. PPP method has become very attractive since the early 2000s and it provided great advantages for engineering and scientific applications. However, PPP method needs at least 2 hours observation time and the required observation length may be longer depending on several factors, such as the number of satellites, satellite configuration etc. The more satellites, the less observation time. Nevertheless the impact of the number of satellites included must be known very well. In this study, to determine the contribution of GLONASS on PPP, GLONASS satellite observations were added one by one from 1 to 5 satellite in 2, 4 and 6 hours of observations. For this purpose, the data collected at the IGS site ISTA was used. Data processing has been done for Day of Year (DOY) 197 in 2016. 24 hours GPS observations have been processed by Bernese 5.2 PPP module and the output was selected as the reference while 2, 4 and 6 hours GPS and GPS/GLONASS observations have been processed by magic GNSS PPP module. The results clearly showed that GPS/GLONASS observations improved positional accuracy, precision, dilution of precision and convergence to the reference coordinates. In this context, coordinate differences between 24 hours GPS observations and 6 hours GPS/GLONASS observations have been obtained as less than 2 cm.

  7. Independent evaluation of point source fossil fuel CO2 emissions to better than 10%.

    PubMed

    Turnbull, Jocelyn Christine; Keller, Elizabeth D; Norris, Margaret W; Wiltshire, Rachael M

    2016-09-13

    Independent estimates of fossil fuel CO2 (CO2ff) emissions are key to ensuring that emission reductions and regulations are effective and provide needed transparency and trust. Point source emissions are a key target because a small number of power plants represent a large portion of total global emissions. Currently, emission rates are known only from self-reported data. Atmospheric observations have the potential to meet the need for independent evaluation, but useful results from this method have been elusive, due to challenges in distinguishing CO2ff emissions from the large and varying CO2 background and in relating atmospheric observations to emission flux rates with high accuracy. Here we use time-integrated observations of the radiocarbon content of CO2 ((14)CO2) to quantify the recently added CO2ff mole fraction at surface sites surrounding a point source. We demonstrate that both fast-growing plant material (grass) and CO2 collected by absorption into sodium hydroxide solution provide excellent time-integrated records of atmospheric (14)CO2 These time-integrated samples allow us to evaluate emissions over a period of days to weeks with only a modest number of measurements. Applying the same time integration in an atmospheric transport model eliminates the need to resolve highly variable short-term turbulence. Together these techniques allow us to independently evaluate point source CO2ff emission rates from atmospheric observations with uncertainties of better than 10%. This uncertainty represents an improvement by a factor of 2 over current bottom-up inventory estimates and previous atmospheric observation estimates and allows reliable independent evaluation of emissions.

  8. Factors That Influence the Rating of Perceived Exertion After Endurance Training.

    PubMed

    Roos, Lilian; Taube, Wolfgang; Tuch, Carolin; Frei, Klaus Michael; Wyss, Thomas

    2018-03-15

    Session rating of perceived exertion (sRPE) is an often used measure to assess athletes' training load. However, little is known which factors could optimize the quality of data collection thereof. The aim of the present study was to investigate the effects of (i) the survey methods and (ii) the time points when sRPE was assessed on the correlation between subjective (sRPE) and objective (heart rate training impulse; TRIMP) assessment of training load. In the first part, 45 well-trained subjects (30 men, 15 women) performed 20 running sessions with a heart rate monitor and reported sRPE 30 minutes after training cessation. For the reporting the subjects were grouped into three survey method groups (paper-pencil, online questionnaire, and mobile device). In the second part of the study, another 40 athletes (28 men, 12 women) performed 4x5 running sessions with the four time points to report the sRPE randomly assigned (directly after training cessation, 30 minutes post-exercise, in the evening of the same day, the next morning directly after waking up). The assessment of sRPE is influenced by time point, survey method, TRIMP, sex, and training type. It is recommended to assess sRPE values via a mobile device or online tool, as the survey method "paper" displayed lower correlations between sRPE and TRIMP. Subjective training load measures are highly individual. When compared at the same relative intensity, lower sRPE values were reported by women, for the training types representing slow runs, and for time points with greater duration between training cessation and sRPE assessment. The assessment method for sRPE should be kept constant for each athlete and comparisons between athletes or sexes are not recommended.

  9. Equality of employment opportunities for nurses at the point of qualification: an exploratory study.

    PubMed

    Harris, Ruth; Ooms, Ann; Grant, Robert; Marshall-Lucette, Sylvie; Chu, Christine Sek Fun; Sayer, Jane; Burke, Linda

    2013-03-01

    Securing employment after qualification is of utmost importance to newly qualified nurses to consolidate knowledge and skills. The factors that influence success in gaining this first post are not known. The study aimed to describe the first post gained after qualification in terms of setting, nature of employment contract and geographical distribution and explore the relationship between a range of factors (including ethnicity) and employment at the point of qualification. An exploratory study using structured questionnaires and secondary analysis of data routinely collected by the universities about students and their progress during their course. The study was conducted in eight universities within a large, multicultural city in the UK as part of the 'Readiness for Work' research programme. Eight hundred and four newly qualified nurses who had successfully completed a diploma or degree from one of the universities; a response rate of 77% representing 49% of all graduating students in the study population. Data were collected by self-completed semi-structured questionnaires administered to students at the time of qualification and at three months post-qualification. Routinely collected data from the universities were also collected. Fifty two percent of participants had been offered a job at the point of qualification (85% of those who had applied and been interviewed). Of these, 99% had been offered a nursing post, 88% in the city studied, 67% in the healthcare setting where they had completed a course placement. 44% felt "confident" and 32% "very confident" about their employment prospects. Predictors of employment success included ethnicity, specialty of nursing and university attended. Predictors of confidence and preparedness for job seeking included ethnicity, nursing specialty, gender and grade of degree. Newly qualified nurses from non-White/British ethnic groups were less likely to get a job and feel confident about and prepared for job seeking. This study has demonstrated that ethnicity does lead to employment disadvantage for newly qualified nurses. This is an important contribution towards recognizing and describing the evidence so that appropriate responses and interventions can be developed. It is important that universities and healthcare institutions work closely together to support students at this important time in their nursing career. Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. Assessing delivery practices of mothers over time and over space in Uganda, 2003-2012.

    PubMed

    Sprague, Daniel A; Jeffery, Caroline; Crossland, Nadine; House, Thomas; Roberts, Gareth O; Vargas, William; Ouma, Joseph; Lwanga, Stephen K; Valadez, Joseph J

    2016-01-01

    It is well known that safe delivery in a health facility reduces the risks of maternal and infant mortality resulting from perinatal complications. What is less understood are the factors associated with safe delivery practices. We investigate factors influencing health facility delivery practices while adjusting for multiple other factors simultaneously, spatial heterogeneity, and trends over time. We fitted a logistic regression model to Lot Quality Assurance Sampling (LQAS) data from Uganda in a framework that considered individual-level covariates, geographical features, and variations over five time points. We accounted for all two-covariate interactions and all three-covariate interactions for which two of the covariates already had a significant interaction, were able to quantify uncertainty in outputs using computationally intensive cluster bootstrap methods, and displayed outputs using a geographical information system. Finally, we investigated what information could be predicted about districts at future time-points, before the next LQAS survey is carried out. To do this, we applied the model to project a confidence interval for the district level coverage of health facility delivery at future time points, by using the lower and upper end values of known demographics to construct a confidence range for the prediction and define priority groups. We show that ease of access, maternal age and education are strongly associated with delivery in a health facility; after accounting for this, there remains a significant trend towards greater uptake over time. We use this model together with known demographics to formulate a nascent early warning system that identifies candidate districts expected to have low prevalence of facility-based delivery in the immediate future. Our results support the hypothesis that increased development, particularly related to education and access to health facilities, will act to increase facility-based deliveries, a factor associated with reducing perinatal associated mortality. We provide a statistical method for using inexpensive and routinely collected monitoring and evaluation data to answer complex epidemiology and public health questions in a resource-poor setting. We produced a model based on this data that explained the spatial distribution of facility-based delivery in Uganda. Finally, we used this model to make a prediction about the future priority of districts that was validated by monitoring and evaluation data collected in the next year.

  11. Time-Resolved Transposon Insertion Sequencing Reveals Genome-Wide Fitness Dynamics during Infection.

    PubMed

    Yang, Guanhua; Billings, Gabriel; Hubbard, Troy P; Park, Joseph S; Yin Leung, Ka; Liu, Qin; Davis, Brigid M; Zhang, Yuanxing; Wang, Qiyao; Waldor, Matthew K

    2017-10-03

    Transposon insertion sequencing (TIS) is a powerful high-throughput genetic technique that is transforming functional genomics in prokaryotes, because it enables genome-wide mapping of the determinants of fitness. However, current approaches for analyzing TIS data assume that selective pressures are constant over time and thus do not yield information regarding changes in the genetic requirements for growth in dynamic environments (e.g., during infection). Here, we describe structured analysis of TIS data collected as a time series, termed pattern analysis of conditional essentiality (PACE). From a temporal series of TIS data, PACE derives a quantitative assessment of each mutant's fitness over the course of an experiment and identifies mutants with related fitness profiles. In so doing, PACE circumvents major limitations of existing methodologies, specifically the need for artificial effect size thresholds and enumeration of bacterial population expansion. We used PACE to analyze TIS samples of Edwardsiella piscicida (a fish pathogen) collected over a 2-week infection period from a natural host (the flatfish turbot). PACE uncovered more genes that affect E. piscicida 's fitness in vivo than were detected using a cutoff at a terminal sampling point, and it identified subpopulations of mutants with distinct fitness profiles, one of which informed the design of new live vaccine candidates. Overall, PACE enables efficient mining of time series TIS data and enhances the power and sensitivity of TIS-based analyses. IMPORTANCE Transposon insertion sequencing (TIS) enables genome-wide mapping of the genetic determinants of fitness, typically based on observations at a single sampling point. Here, we move beyond analysis of endpoint TIS data to create a framework for analysis of time series TIS data, termed pattern analysis of conditional essentiality (PACE). We applied PACE to identify genes that contribute to colonization of a natural host by the fish pathogen Edwardsiella piscicida. PACE uncovered more genes that affect E. piscicida 's fitness in vivo than were detected using a terminal sampling point, and its clustering of mutants with related fitness profiles informed design of new live vaccine candidates. PACE yields insights into patterns of fitness dynamics and circumvents major limitations of existing methodologies. Finally, the PACE method should be applicable to additional "omic" time series data, including screens based on clustered regularly interspaced short palindromic repeats with Cas9 (CRISPR/Cas9). Copyright © 2017 Yang et al.

  12. Implementation of a Multimodal Mobile System for Point-of-Sale Surveillance: Lessons Learned From Case Studies in Washington, DC, and New York City.

    PubMed

    Cantrell, Jennifer; Ganz, Ollie; Ilakkuvan, Vinu; Tacelosky, Michael; Kreslake, Jennifer; Moon-Howard, Joyce; Aidala, Angela; Vallone, Donna; Anesetti-Rothermel, Andrew; Kirchner, Thomas R

    2015-01-01

    In tobacco control and other fields, point-of-sale surveillance of the retail environment is critical for understanding industry marketing of products and informing public health practice. Innovations in mobile technology can improve existing, paper-based surveillance methods, yet few studies describe in detail how to operationalize the use of technology in public health surveillance. The aims of this paper are to share implementation strategies and lessons learned from 2 tobacco, point-of-sale surveillance projects to inform and prepare public health researchers and practitioners to implement new mobile technologies in retail point-of-sale surveillance systems. From 2011 to 2013, 2 point-of-sale surveillance pilot projects were conducted in Washington, DC, and New York, New York, to capture information about the tobacco retail environment and test the feasibility of a multimodal mobile data collection system, which included capabilities for audio or video recording data, electronic photographs, electronic location data, and a centralized back-end server and dashboard. We established a preimplementation field testing process for both projects, which involved a series of rapid and iterative tests to inform decisions and establish protocols around key components of the project. Important components of field testing included choosing a mobile phone that met project criteria, establishing an efficient workflow and accessible user interfaces for each component of the system, training and providing technical support to fieldworkers, and developing processes to integrate data from multiple sources into back-end systems that can be utilized in real-time. A well-planned implementation process is critical for successful use and performance of multimodal mobile surveillance systems. Guidelines for implementation include (1) the need to establish and allow time for an iterative testing framework for resolving technical and logistical challenges; (2) developing a streamlined workflow and user-friendly interfaces for data collection; (3) allowing for ongoing communication, feedback, and technology-related skill-building among all staff; and (4) supporting infrastructure for back-end data systems. Although mobile technologies are evolving rapidly, lessons learned from these case studies are essential for ensuring that the many benefits of new mobile systems for rapid point-of-sale surveillance are fully realized.

  13. Implementation of a Multimodal Mobile System for Point-of-Sale Surveillance: Lessons Learned From Case Studies in Washington, DC, and New York City

    PubMed Central

    Ganz, Ollie; Ilakkuvan, Vinu; Tacelosky, Michael; Kreslake, Jennifer; Moon-Howard, Joyce; Aidala, Angela; Vallone, Donna; Anesetti-Rothermel, Andrew; Kirchner, Thomas R

    2015-01-01

    Background In tobacco control and other fields, point-of-sale surveillance of the retail environment is critical for understanding industry marketing of products and informing public health practice. Innovations in mobile technology can improve existing, paper-based surveillance methods, yet few studies describe in detail how to operationalize the use of technology in public health surveillance. Objective The aims of this paper are to share implementation strategies and lessons learned from 2 tobacco, point-of-sale surveillance projects to inform and prepare public health researchers and practitioners to implement new mobile technologies in retail point-of-sale surveillance systems. Methods From 2011 to 2013, 2 point-of-sale surveillance pilot projects were conducted in Washington, DC, and New York, New York, to capture information about the tobacco retail environment and test the feasibility of a multimodal mobile data collection system, which included capabilities for audio or video recording data, electronic photographs, electronic location data, and a centralized back-end server and dashboard. We established a preimplementation field testing process for both projects, which involved a series of rapid and iterative tests to inform decisions and establish protocols around key components of the project. Results Important components of field testing included choosing a mobile phone that met project criteria, establishing an efficient workflow and accessible user interfaces for each component of the system, training and providing technical support to fieldworkers, and developing processes to integrate data from multiple sources into back-end systems that can be utilized in real-time. Conclusions A well-planned implementation process is critical for successful use and performance of multimodal mobile surveillance systems. Guidelines for implementation include (1) the need to establish and allow time for an iterative testing framework for resolving technical and logistical challenges; (2) developing a streamlined workflow and user-friendly interfaces for data collection; (3) allowing for ongoing communication, feedback, and technology-related skill-building among all staff; and (4) supporting infrastructure for back-end data systems. Although mobile technologies are evolving rapidly, lessons learned from these case studies are essential for ensuring that the many benefits of new mobile systems for rapid point-of-sale surveillance are fully realized. PMID:27227138

  14. Diffusion tensor imaging study of pediatric patients with congenital hydrocephalus: 1-year postsurgical outcomes.

    PubMed

    Mangano, Francesco T; Altaye, Mekibib; McKinstry, Robert C; Shimony, Joshua S; Powell, Stephanie K; Phillips, Jannel M; Barnard, Holly; Limbrick, David D; Holland, Scott K; Jones, Blaise V; Dodd, Jonathan; Simpson, Sarah; Mercer, Deanna; Rajagopal, Akila; Bidwell, Sarah; Yuan, Weihong

    2016-09-01

    OBJECTIVE The purpose of this study was to investigate white matter (WM) structural abnormalities using diffusion tensor imaging (DTI) in children with hydrocephalus before CSF diversionary surgery (including ventriculoperitoneal shunt insertion and endoscopic third ventriculostomy) and during the course of recovery after surgery in association with neuropsychological and behavioral outcome. METHODS This prospective study included 54 pediatric patients with congenital hydrocephalus (21 female, 33 male; age range 0.03-194.5 months) who underwent surgery and 64 normal controls (30 female, 34 male; age range 0.30-197.75 months). DTI and neurodevelopmental outcome data were collected once in the control group and 3 times (preoperatively and at 3 and 12 months postoperatively) in the patients with hydrocephalus. DTI measures, including fractional anisotropy (FA), mean diffusivity (MD), axial diffusivity (AD), and radial diffusivity (RD) values were extracted from the genu of the corpus callosum (gCC) and the posterior limb of internal capsule (PLIC). Group analysis was performed first cross-sectionally to quantify DTI abnormalities at 3 time points by comparing the data obtained in the hydrocephalus group for each of the 3 time points to data obtained in the controls. Longitudinal comparisons were conducted pairwise between different time points in patients whose data were acquired at multiple time points. Neurodevelopmental data were collected and analyzed using the Adaptive Behavior Assessment System, Second Edition, and the Bayley Scales of Infant Development, Third Edition. Correlation analyses were performed between DTI and behavioral measures. RESULTS Significant DTI abnormalities were found in the hydrocephalus patients in both the gCC (lower FA and higher MD, AD, and RD) and the PLIC (higher FA, lower AD and RD) before surgery. The DTI measures in the gCC remained mostly abnormal at 3 and 12 months after surgery. The DTI abnormalities in the PLIC were significant in FA and AD at 3 months after surgery but did not persist when tested at 12 months after surgery. Significant longitudinal DTI changes in the patients with hydrocephalus were found in the gCC when findings at 3 and 12 months after surgery were compared. In the PLIC, trend-level longitudinal changes were observed between preoperative findings and 3-month postoperative findings, as well as between 3- and 12-month postoperative findings. Significant correlation between DTI and developmental outcome was found at all 3 time points. Notably, a significant correlation was found between DTI in the PLIC at 3 months after surgery and developmental outcome at 12 months after surgery. CONCLUSIONS The data showed significant WM abnormality based on DTI in both the gCC and the PLIC in patients with congenital hydrocephalus before surgery, and the abnormalities persisted in both the gCC and the PLIC at 3 months after surgery. The DTI values remained significantly abnormal in the gCC at 12 months after surgery. Longitudinal analysis showed signs of recovery in both WM structures between different time points. Combined with the significant correlation found between DTI and neuropsychological measures, the findings of this study suggest that DTI can serve as a sensitive imaging biomarker for underlying neuroanatomical changes and postsurgical developmental outcome and even as a predictor for future outcomes.

  15. Scanning fluorescent microthermal imaging apparatus and method

    DOEpatents

    Barton, Daniel L.; Tangyunyong, Paiboon

    1998-01-01

    A scanning fluorescent microthermal imaging (FMI) apparatus and method is disclosed, useful for integrated circuit (IC) failure analysis, that uses a scanned and focused beam from a laser to excite a thin fluorescent film disposed over the surface of the IC. By collecting fluorescent radiation from the film, and performing point-by-point data collection with a single-point photodetector, a thermal map of the IC is formed to measure any localized heating associated with defects in the IC.

  16. Volume 2 - Point Sources

    EPA Pesticide Factsheets

    Point source emission reference materials from the Emissions Inventory Improvement Program (EIIP). Provides point source guidance on planning, emissions estimation, data collection, inventory documentation and reporting, and quality assurance/quality contr

  17. Implementation of Competitive Food and Beverage Standards in a Sample of Massachusetts Schools: The NOURISH Study (Nutrition Opportunities to Understand Reforms Involving Student Health)

    PubMed Central

    Hoffman, Jessica A.; Rosenfeld, Lindsay; Schmidt, Nicole; Cohen, Juliana F. W.; Gorski, Mary; Chaffee, Ruth; Smith, Lauren; Rimm, Eric B.

    2015-01-01

    Background During 2012, Massachusetts adopted comprehensive school competitive food and beverage standards that closely align with Institute of Medicine recommendations and Smart Snacks in School national standards. Objective We examined the extent to which a sample of Massachusetts middle schools and high schools sold foods and beverages that were compliant with the state competitive food and beverage standards after the first year of implementation, and complied with four additional aspects of the regulations. Design Observational cohort study with data collected before implementation (Spring 2012) and 1 year after implementation (Spring 2013). Participants/setting School districts (N=37) with at least one middle school and one high school participated. Main outcome measures Percent of competitive foods and beverages that were compliant with Massachusetts standards and compliance with four additional aspects of the regulations. Data were collected via school site visits and a foodservice director questionnaire. Statistical analyses performed Multilevel models were used to examine change in food and beverage compliance over time. Results More products were available in high schools than middle schools at both time points. The number of competitive beverages and several categories of competitive food products sold in the sample of Massachusetts schools decreased following the implementation of the standards. Multilevel models demonstrated a 47-percentage-point increase in food and 46-percentage-point increase in beverage compliance in Massachusetts schools from 2012 to 2013. Overall, total compliance was higher for beverages than foods. Conclusions This study of a group of Massachusetts schools demonstrated the feasibility of schools making substantial changes in response to requirements for healthier competitive foods, even in the first year of implementation. PMID:26210085

  18. Cosmesis and Breast-Related Quality of Life Outcomes After Intraoperative Radiation Therapy for Early Breast Cancer: A Substudy of the TARGIT-A Trial

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Corica, Tammy, E-mail: Tammy.Corica@health.wa.gov.au; School of Medicine and Pharmacology, University of Western Australia, Crawley, Western Australia; Nowak, Anna K.

    Purpose: To report the first comprehensive investigation of patient-reported cosmesis and breast-related quality of life (QOL) outcomes comparing patients randomized to risk-adapted single-dose intraoperative radiation therapy (TARGIT-IORT) versus external beam radiation therapy (EBRT) on the TARGIT-A trial. Methods and Materials: Longitudinal cosmesis and QOL data were collected from a subset of TARGIT-A participants who received TARGIT-IORT as a separate procedure (postpathology). Patients completed a cosmetic assessment before radiation therapy and annually thereafter for at least 5 years. Patients also completed the combined European Organization for Research and Treatment of Cancer (EORTC) core questionnaire and Breast-Specific Module in addition to the Body Imagemore » after Breast Cancer Questionnaire at baseline and annually thereafter. The combined EORTC questionnaires were also collected 3, 6, and 9 months after wide local excision. Results: An Excellent–Good cosmetic result was scored more often than a Fair–Poor result for both treatment groups across all time points. The TARGIT-IORT patients reported better breast-related QOL than EBRT patients. Statistically and clinically significant differences were seen at month 6 and year 1, with EBRT patients having moderately worse breast symptoms (a statistically significant difference of more than 10 in a 100-point scale) than TARGIT-IORT patients at these time points. Conclusion: Patients treated with TARGIT-IORT on the TARGIT-A trial have similar self-reported cosmetic outcome but better breast-related QOL outcomes than patients treated with EBRT. This important evidence can facilitate the treatment decision-making process for patients who have early breast cancer suitable for breast-conserving surgery and inform their clinicians.« less

  19. Implementation of Competitive Food and Beverage Standards in a Sample of Massachusetts Schools: The NOURISH Study (Nutrition Opportunities to Understand Reforms Involving Student Health).

    PubMed

    Hoffman, Jessica A; Rosenfeld, Lindsay; Schmidt, Nicole; Cohen, Juliana F W; Gorski, Mary; Chaffee, Ruth; Smith, Lauren; Rimm, Eric B

    2015-08-01

    During 2012, Massachusetts adopted comprehensive school competitive food and beverage standards that closely align with Institute of Medicine recommendations and Smart Snacks in School national standards. We examined the extent to which a sample of Massachusetts middle schools and high schools sold foods and beverages that were compliant with the state competitive food and beverage standards after the first year of implementation, and complied with four additional aspects of the regulations. Observational cohort study with data collected before implementation (Spring 2012) and 1 year after implementation (Spring 2013). School districts (N=37) with at least one middle school and one high school participated. Percent of competitive foods and beverages that were compliant with Massachusetts standards and compliance with four additional aspects of the regulations. Data were collected via school site visits and a foodservice director questionnaire. Multilevel models were used to examine change in food and beverage compliance over time. More products were available in high schools than middle schools at both time points. The number of competitive beverages and several categories of competitive food products sold in the sample of Massachusetts schools decreased following the implementation of the standards. Multilevel models demonstrated a 47-percentage-point increase in food and 46-percentage-point increase in beverage compliance in Massachusetts schools from 2012 to 2013. Overall, total compliance was higher for beverages than foods. This study of a group of Massachusetts schools demonstrated the feasibility of schools making substantial changes in response to requirements for healthier competitive foods, even in the first year of implementation. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  20. Uav Photogrammetric Solution Using a Raspberry pi Camera Module and Smart Devices: Test and Results

    NASA Astrophysics Data System (ADS)

    Piras, M.; Grasso, N.; Jabbar, A. Abdul

    2017-08-01

    Nowadays, smart technologies are an important part of our action and life, both in indoor and outdoor environment. There are several smart devices very friendly to be setting, where they can be integrated and embedded with other sensors, having a very low cost. Raspberry allows to install an internal camera called Raspberry Pi Camera Module, both in RGB band and NIR band. The advantage of this system is the limited cost (< 60 euro), their light weight and their simplicity to be used and embedded. This paper will describe a research where a Raspberry Pi with the Camera Module was installed onto a UAV hexacopter based on arducopter system, with purpose to collect pictures for photogrammetry issue. Firstly, the system was tested with aim to verify the performance of RPi camera in terms of frame per second/resolution and the power requirement. Moreover, a GNSS receiver Ublox M8T was installed and connected to the Raspberry platform in order to collect real time position and the raw data, for data processing and to define the time reference. IMU was also tested to see the impact of UAV rotors noise on different sensors like accelerometer, Gyroscope and Magnetometer. A comparison of the achieved results (accuracy) on some check points of the point clouds obtained by the camera will be reported as well in order to analyse in deeper the main discrepancy on the generated point cloud and the potentiality of these proposed approach. In this contribute, the assembling of the system is described, in particular the dataset acquired and the results carried out will be analysed.

  1. Modeling a Mathematical to Quantify the Degree of Emergency Department Crowding

    NASA Astrophysics Data System (ADS)

    Chang, Y.; Pan, C.; Wen, J.

    2012-12-01

    The purpose of this study is to deduce a function from the admissions/discharge rate of patient flow to estimate a "Critical Point" that provides a reference for warning systems in regards to crowding in the emergency department (ED) of a hospital or medical clinic. In this study, a model of "Input-Throughput-Output" was used in our established mathematical function to evaluate the critical point. The function was defined as ∂ρ/∂t=-K×∂ρ/∂x , where ρ= number of patients per unit distance (also called density), t= time, x= distance, K= distance of patients movement per unit time. Using the average K of ED crowding, we could initiate the warning system at appropriate time and plan necessary emergency response to facilitate the patient process more smoothly. It was concluded that ED crowding can be quantified using the average value of K, and the value can be used as a reference for medical staff to give optimal emergency medical treatment to patients. Therefore, additional practical work should be launched to collect more precise quantitative data.

  2. Optimisation of logistics processes of energy grass collection

    NASA Astrophysics Data System (ADS)

    Bányai, Tamás.

    2010-05-01

    The collection of energy grass is a logistics-intensive process [1]. The optimal design and control of transportation and collection subprocesses is a critical point of the supply chain. To avoid irresponsible decisions by right of experience and intuition, the optimisation and analysis of collection processes based on mathematical models and methods is the scientific suggestible way. Within the frame of this work, the author focuses on the optimisation possibilities of the collection processes, especially from the point of view transportation and related warehousing operations. However the developed optimisation methods in the literature [2] take into account the harvesting processes, county-specific yields, transportation distances, erosion constraints, machinery specifications, and other key variables, but the possibility of more collection points and the multi-level collection were not taken into consideration. The possible areas of using energy grass is very wide (energetically use, biogas and bio alcohol production, paper and textile industry, industrial fibre material, foddering purposes, biological soil protection [3], etc.), so not only a single level but also a multi-level collection system with more collection and production facilities has to be taken into consideration. The input parameters of the optimisation problem are the followings: total amount of energy grass to be harvested in each region; specific facility costs of collection, warehousing and production units; specific costs of transportation resources; pre-scheduling of harvesting process; specific transportation and warehousing costs; pre-scheduling of processing of energy grass at each facility (exclusive warehousing). The model take into consideration the following assumptions: (1) cooperative relation among processing and production facilties, (2) capacity constraints are not ignored, (3) the cost function of transportation is non-linear, (4) the drivers conditions are ignored. The objective function of the optimisation is the maximisation of the profit which means the maximization of the difference between revenue and cost. The objective function trades off the income of the assigned transportation demands against the logistic costs. The constraints are the followings: (1) the free capacity of the assigned transportation resource is more than the re-quested capacity of the transportation demand; the calculated arrival time of the transportation resource to the harvesting place is not later than the requested arrival time of them; (3) the calculated arrival time of the transportation demand to the processing and production facility is not later than the requested arrival time; (4) one transportation demand is assigned to one transportation resource and one resource is assigned to one transportation resource. The decision variable of the optimisation problem is the set of scheduling variables and the assignment of resources to transportation demands. The evaluation parameters of the optimised system are the followings: total costs of the collection process; utilisation of transportation resources and warehouses; efficiency of production and/or processing facilities. However the multidimensional heuristic optimisation method is based on genetic algorithm, but the routing sequence of the optimisation works on the base of an ant colony algorithm. The optimal routes are calculated by the aid of the ant colony algorithm as a subroutine of the global optimisation method and the optimal assignment is given by the genetic algorithm. One important part of the mathematical method is the sensibility analysis of the objective function, which shows the influence rate of the different input parameters. Acknowledgements This research was implemented within the frame of the project entitled "Development and operation of the Technology and Knowledge Transfer Centre of the University of Miskolc". with support by the European Union and co-funding of the European Social Fund. References [1] P. R. Daniel: The Economics of Harvesting and Transporting Corn Stover for Conversion to Fuel Ethanol: A Case Study for Minnesota. University of Minnesota, Department of Applied Economics. 2006. http://ideas.repec.org/p/ags/umaesp/14213.html [2] T. G. Douglas, J. Brendan, D. Erin & V.-D. Becca: Energy and Chemicals from Native Grasses: Production, Transportation and Processing Technologies Considered in the Northern Great Plains. University of Minnesota, Department of Applied Economics. 2006. http://ideas.repec.org/p/ags/umaesp/13838.html [3] Homepage of energygrass. www.energiafu.hu

  3. A soft-computing methodology for noninvasive time-spatial temperature estimation.

    PubMed

    Teixeira, César A; Ruano, Maria Graça; Ruano, António E; Pereira, Wagner C A

    2008-02-01

    The safe and effective application of thermal therapies is restricted due to lack of reliable noninvasive temperature estimators. In this paper, the temporal echo-shifts of backscattered ultrasound signals, collected from a gel-based phantom, were tracked and assigned with the past temperature values as radial basis functions neural networks input information. The phantom was heated using a piston-like therapeutic ultrasound transducer. The neural models were assigned to estimate the temperature at different intensities and points arranged across the therapeutic transducer radial line (60 mm apart from the transducer face). Model inputs, as well as the number of neurons were selected using the multiobjective genetic algorithm (MOGA). The best attained models present, in average, a maximum absolute error less than 0.5 degrees C, which is pointed as the borderline between a reliable and an unreliable estimator in hyperthermia/diathermia. In order to test the spatial generalization capacity, the best models were tested using spatial points not yet assessed, and some of them presented a maximum absolute error inferior to 0.5 degrees C, being "elected" as the best models. It should be also stressed that these best models present implementational low-complexity, as desired for real-time applications.

  4. Vehicle routing for the eco-efficient collection of household plastic waste.

    PubMed

    Bing, Xiaoyun; de Keizer, Marlies; Bloemhof-Ruwaard, Jacqueline M; van der Vorst, Jack G A J

    2014-04-01

    Plastic waste is a special category of municipal solid waste. Plastic waste collection is featured with various alternatives of collection methods (curbside/drop-off) and separation methods (source-/post-separation). In the Netherlands, the collection routes of plastic waste are the same as those of other waste, although plastic is different than other waste in terms of volume to weight ratio. This paper aims for redesigning the collection routes and compares the collection options of plastic waste using eco-efficiency as performance indicator. Eco-efficiency concerns the trade-off between environmental impacts, social issues and costs. The collection problem is modeled as a vehicle routing problem. A tabu search heuristic is used to improve the routes. Collection alternatives are compared by a scenario study approach. Real distances between locations are calculated with MapPoint. The scenario study is conducted based on real case data of the Dutch municipality Wageningen. Scenarios are designed according to the collection alternatives with different assumptions in collection method, vehicle type, collection frequency and collection points, etc. Results show that the current collection routes can be improved in terms of eco-efficiency performance by using our method. The source-separation drop-off collection scenario has the best performance for plastic collection assuming householders take the waste to the drop-off points in a sustainable manner. The model also shows to be an efficient decision support tool to investigate the impacts of future changes such as alternative vehicle type and different response rates. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

  5. Single-breath analysis using a novel simple sampler and capillary electrophoresis with contactless conductometric detection.

    PubMed

    Greguš, Michal; Foret, František; Kubáň, Petr

    2015-02-01

    The analysis of ionic content of exhaled breath condensate (EBC) from one single breath by CE with C(4) D is demonstrated for the first time. A miniature sampler made from a 2-mL syringe and an aluminum cooling cylinder for collection of EBC was developed. Various parameters of the sampler that influence its collection efficiency, repeatability, and effect of respiratory patterns were studied in detail. Efficient procedures for the cleanup of the miniature sampler were also developed and resulted in significant improvement of sampling repeatability. Analysis of EBC was performed by CE-C(4) D in a 60 mM MES/l-histidine BGE with 30 μM CTAB and 2 mM 18-crown-6 at pH 6 and excellent repeatability of migration times (RSD < 1.3% (n = 7)) and peak areas (RSD < 7% (n = 7)) of 12 inorganic anions, cations, and organic acids was obtained. It has been shown that the breathing pattern has a significant impact on the concentration of the analytes in the collected EBC. As the ventilatory pattern can be easily controlled during single exhalation, the developed collection system and method provides a highly reproducible and fast way of collecting EBC with applicability in point-of-care diagnostics. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Assessing Agreement Between Salivary Alpha Amylase Levels Collected by Passive Drool and Eluted Filter Paper in Adolescents With Cancer

    PubMed Central

    Ameringer, Suzanne; Munro, Cindy; Elswick, R.K.

    2014-01-01

    Purpose/Objectives To assess the validity of filter paper (FP) against the gold standard of passive drool (PD) for collecting salivary alpha amylase as a surrogate biomarker of psychological stress in adolescents with cancer. Design Part of a longitudinal, descriptive study of symptoms in adolescents with cancer during chemotherapy. Setting A pediatric hematology/oncology treatment center. Sample 33 saliva sample pairs from nine adolescents with cancer, aged 13–18 years. Methods Salivary alpha amylase was collected by PD and FP at four time points during a cycle of chemotherapy: days 1 (time 1) and 2 (time 2) of chemotherapy, day 7–10 (time 3), and day 1 of the next cycle (time 4). A random effects regression was used to assess the correlation between PD and FP values, and a Bland Altman analysis was conducted to assess agreement between the values. Main Research Variables Salivary alpha amylase. Findings The estimated correlation between PD and FP values was r = 0.91, p < 0.001. Regression results were also used to rescale FP values to the levels of the PD values because the FP values were on a different scale than the PD values. The Bland Altman analysis revealed that the agreement between the rescaled FP values and PD values was not satisfactory. Conclusions Eluted FP may not be a valid method for collecting salivary alpha amylase in adolescents with cancer. Implications for Nursing Psychological stress in adolescents with cancer may be linked to negative outcomes, such as greater symptom severity and post-traumatic stress disorder. Nurses need valid, efficient, biobehavioral measures to assess psychological stress in the clinical setting. PMID:22750901

  7. A novel approach to quantifying the spatiotemporal behavior of instrumented grey seals used to sample the environment.

    PubMed

    Baker, Laurie L; Mills Flemming, Joanna E; Jonsen, Ian D; Lidgard, Damian C; Iverson, Sara J; Bowen, W Don

    2015-01-01

    Paired with satellite location telemetry, animal-borne instruments can collect spatiotemporal data describing the animal's movement and environment at a scale relevant to its behavior. Ecologists have developed methods for identifying the area(s) used by an animal (e.g., home range) and those used most intensely (utilization distribution) based on location data. However, few have extended these models beyond their traditional roles as descriptive 2D summaries of point data. Here we demonstrate how the home range method, T-LoCoH, can be expanded to quantify collective sampling coverage by multiple instrumented animals using grey seals (Halichoerus grypus) equipped with GPS tags and acoustic transceivers on the Scotian Shelf (Atlantic Canada) as a case study. At the individual level, we illustrate how time and space-use metrics quantifying individual sampling coverage may be used to determine the rate of acoustic transmissions received. Grey seals collectively sampled an area of 11,308 km (2) and intensely sampled an area of 31 km (2) from June-December. The largest area sampled was in July (2094.56 km (2)) and the smallest area sampled occurred in August (1259.80 km (2)), with changes in sampling coverage observed through time. T-LoCoH provides an effective means to quantify changes in collective sampling effort by multiple instrumented animals and to compare these changes across time. We also illustrate how time and space-use metrics of individual instrumented seal movement calculated using T-LoCoH can be used to account for differences in the amount of time a bioprobe (biological sampling platform) spends in an area.

  8. a New Approach for Progressive Dense Reconstruction from Consecutive Images Based on Prior Low-Density 3d Point Clouds

    NASA Astrophysics Data System (ADS)

    Lari, Z.; El-Sheimy, N.

    2017-09-01

    In recent years, the increasing incidence of climate-related disasters has tremendously affected our environment. In order to effectively manage and reduce dramatic impacts of such events, the development of timely disaster management plans is essential. Since these disasters are spatial phenomena, timely provision of geospatial information is crucial for effective development of response and management plans. Due to inaccessibility of the affected areas and limited budget of first-responders, timely acquisition of the required geospatial data for these applications is usually possible only using low-cost imaging and georefencing sensors mounted on unmanned platforms. Despite rapid collection of the required data using these systems, available processing techniques are not yet capable of delivering geospatial information to responders and decision makers in a timely manner. To address this issue, this paper introduces a new technique for dense 3D reconstruction of the affected scenes which can deliver and improve the needed geospatial information incrementally. This approach is implemented based on prior 3D knowledge of the scene and employs computationally-efficient 2D triangulation, feature descriptor, feature matching and point verification techniques to optimize and speed up 3D dense scene reconstruction procedure. To verify the feasibility and computational efficiency of the proposed approach, an experiment using a set of consecutive images collected onboard a UAV platform and prior low-density airborne laser scanning over the same area is conducted and step by step results are provided. A comparative analysis of the proposed approach and an available image-based dense reconstruction technique is also conducted to prove the computational efficiency and competency of this technique for delivering geospatial information with pre-specified accuracy.

  9. Information content of household-stratified epidemics.

    PubMed

    Kinyanjui, T M; Pellis, L; House, T

    2016-09-01

    Household structure is a key driver of many infectious diseases, as well as a natural target for interventions such as vaccination programs. Many theoretical and conceptual advances on household-stratified epidemic models are relatively recent, but have successfully managed to increase the applicability of such models to practical problems. To be of maximum realism and hence benefit, they require parameterisation from epidemiological data, and while household-stratified final size data has been the traditional source, increasingly time-series infection data from households are becoming available. This paper is concerned with the design of studies aimed at collecting time-series epidemic data in order to maximize the amount of information available to calibrate household models. A design decision involves a trade-off between the number of households to enrol and the sampling frequency. Two commonly used epidemiological study designs are considered: cross-sectional, where different households are sampled at every time point, and cohort, where the same households are followed over the course of the study period. The search for an optimal design uses Bayesian computationally intensive methods to explore the joint parameter-design space combined with the Shannon entropy of the posteriors to estimate the amount of information in each design. For the cross-sectional design, the amount of information increases with the sampling intensity, i.e., the designs with the highest number of time points have the most information. On the other hand, the cohort design often exhibits a trade-off between the number of households sampled and the intensity of follow-up. Our results broadly support the choices made in existing epidemiological data collection studies. Prospective problem-specific use of our computational methods can bring significant benefits in guiding future study designs. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

  10. Eating down or simply eating less? The diet and health implications of these practices during pregnancy and postpartum in rural Bangladesh.

    PubMed

    Harding, Kassandra L; Matias, Susana L; Mridha, Malay K; Vosti, Stephen A; Hussain, Sohrab; Dewey, Kathryn G; Stewart, Christine P

    2017-08-01

    To: (i) determine the prevalence of self-reported eating less and eating down during early and late pregnancy and postpartum, and explore risk factors associated with eating less; (ii) examine the association between eating less and diet quality; and (iii) determine the association between eating less and weight gain during pregnancy. Data were collected longitudinally from a cohort of women participating in a community health programme. Diet was assessed at three time points (≤20 weeks' gestation, 36 weeks' gestation, 6 months' postpartum), body weight was measured during study enrolment (≤20 weeks' gestation) and at 36 weeks' gestation, and information about the woman and her household was collected at enrolment. The Rang-Din Nutrition Study in the Rangpur and Dinajpur districts of Bangladesh. Women (n 4011). The prevalence of self-reported eating less differed by time point (75·9 % in early pregnancy, 38·8 % in late pregnancy, 7·4 % postpartum; P<0·001). The most common reason for eating less across all time periods was food aversion or loss of appetite. Women who reported eating less in late pregnancy had consumed animal-source foods less frequently in the preceding week than women who reported eating more (mean (sd): 11·7 (7·4) v. 14·8 (9·2) times/week; P<0·001) and had lower weekly weight gain than women who reported eating more (mean (se): 0·27 (0·004) v. 0·33 (0·004) kg/week; P<0·001). Eating less has negative implications with respect to diet quality and pregnancy weight gain in this context.

  11. Mirrored pyramidal wells for simultaneous multiple vantage point microscopy

    PubMed Central

    Seale, K.T.; Reiserer, R.S.; Markov, D.A.; Ges, I.A.; Wright, C.; Janetopoulos, C.; Wikswo, J.P.

    2013-01-01

    Summary We report a novel method for obtaining simultaneous images from multiple vantage points of a microscopic specimen using size-matched microscopic mirrors created from anisotropically etched silicon. The resulting pyramidal wells enable bright-field and fluorescent side-view images, and when combined with z-sectioning, provide additional information for 3D reconstructions of the specimen. We have demonstrated the 3D localization and tracking over time of the centrosome of a live Dictyostelium discoideum. The simultaneous acquisition of images from multiple perspectives also provides a five-fold increase in the theoretical collection efficiency of emitted photons, a property which may be useful for low-light imaging modalities such as bioluminescence, or low abundance surface-marker labelling. PMID:19017196

  12. Ion photon emission microscope

    DOEpatents

    Doyle, Barney L.

    2003-04-22

    An ion beam analysis system that creates microscopic multidimensional image maps of the effects of high energy ions from an unfocussed source upon a sample by correlating the exact entry point of an ion into a sample by projection imaging of the ion-induced photons emitted at that point with a signal from a detector that measures the interaction of that ion within the sample. The emitted photons are collected in the lens system of a conventional optical microscope, and projected on the image plane of a high resolution single photon position sensitive detector. Position signals from this photon detector are then correlated in time with electrical effects, including the malfunction of digital circuits, detected within the sample that were caused by the individual ion that created these photons initially.

  13. Cost comparison between private and public collection of residual household waste: Multiple case studies in the Flemish region of Belgium

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jacobsen, R., E-mail: ray.jacobsen@ugent.be; Buysse, J., E-mail: j.buysse@ugent.be; Gellynck, X., E-mail: xavier.gellynck@ugent.be

    2013-01-15

    Highlights: Black-Right-Pointing-Pointer The goal is to compare collection costs for residual household waste. Black-Right-Pointing-Pointer We have clustered all municipalities in order to find mutual comparable pairs. Black-Right-Pointing-Pointer Each pair consists of one private and one public operating waste collection program. Black-Right-Pointing-Pointer All cases show that private service has lower costs than public service. Black-Right-Pointing-Pointer Municipalities were contacted to identify the deeper causes for the waste management program. - Abstract: The rising pressure in terms of cost efficiency on public services pushes governments to transfer part of those services to the private sector. A trend towards more privatizing can be noticedmore » in the collection of municipal household waste. This paper reports the findings of a research project aiming to compare the cost between the service of private and public collection of residual household waste. Multiple case studies of municipalities about the Flemish region of Belgium were conducted. Data concerning the year 2009 were gathered through in-depth interviews in 2010. In total 12 municipalities were investigated, divided into three mutual comparable pairs with a weekly and three mutual comparable pairs with a fortnightly residual waste collection. The results give a rough indication that in all cases the cost of private service is lower than public service in the collection of household waste. Albeit that there is an interest in establishing whether there are differences in the costs and service levels between public and private waste collection services, there are clear difficulties in establishing comparisons that can be made without having to rely on a large number of assumptions and corrections. However, given the cost difference, it remains the responsibility of the municipalities to decide upon the service they offer their citizens, regardless the cost efficiency: public or private.« less

  14. Time Series Discord Detection in Medical Data using a Parallel Relational Database [PowerPoint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Woodbridge, Diane; Wilson, Andrew T.; Rintoul, Mark Daniel

    Recent advances in sensor technology have made continuous real-time health monitoring available in both hospital and non-hospital settings. Since data collected from high frequency medical sensors includes a huge amount of data, storing and processing continuous medical data is an emerging big data area. Especially detecting anomaly in real time is important for patients’ emergency detection and prevention. A time series discord indicates a subsequence that has the maximum difference to the rest of the time series subsequences, meaning that it has abnormal or unusual data trends. In this study, we implemented two versions of time series discord detection algorithmsmore » on a high performance parallel database management system (DBMS) and applied them to 240 Hz waveform data collected from 9,723 patients. The initial brute force version of the discord detection algorithm takes each possible subsequence and calculates a distance to the nearest non-self match to find the biggest discords in time series. For the heuristic version of the algorithm, a combination of an array and a trie structure was applied to order time series data for enhancing time efficiency. The study results showed efficient data loading, decoding and discord searches in a large amount of data, benefiting from the time series discord detection algorithm and the architectural characteristics of the parallel DBMS including data compression, data pipe-lining, and task scheduling.« less

  15. ConnectX2 In niBand Management Queues: New support for Network Of oaded

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Graham, Richard L; Poole, Stephen W; Shamis, Pavel

    2010-01-01

    This paper introduces the newly developed InfiniBand (IB) Management Queue capability, used by the Host Channel Adapter (HCA) to manage network task data flow dependancies, and progress the communications associated with such flows. These tasks include sends, receives, and the newly supported wait task, and are scheduled by the HCA based on a data dependency description provided by the user. This functionality is supported by the ConnectX-2 HCA, and provides the means for delegating collective communication management and progress to the HCA, also known as collective communication offload. This provides a means for overlapping collective communications managed by the HCAmore » and computation on the Central Processing Unit (CPU), thus making it possible to reduce the impact of system noise on parallel applications using collective operations. This paper further describes how this new capability can be used to implement scalable Message Passing Interface (MPI) collective operations, describing the high level details of how this new capability is used to implement the MPI Barrier collective operation, focusing on the latency sensitive performance aspects of this new capability. This paper concludes with small scale benchmark experiments comparing implementations of the barrier collective operation, using the new network offload capabilities, with established point-to-point based implementations of these same algorithms, which manage the data flow using the central processing unit. These early results demonstrate the promise this new capability provides to improve the scalability of high-performance applications using collective communications. The latency of the HCA based implementation of the barrier is similar to that of the best performing point-to-point based implementation managed by the central processing unit, starting to outperform these as the number of processes involved in the collective operation increases.« less

  16. Integrated Intermodal Passenger Transportation System

    NASA Technical Reports Server (NTRS)

    Klock, Ryan; Owens, David; Schwartz, Henry; Plencner, Robert

    2012-01-01

    Modern transportation consists of many unique modes of travel. Each of these modes and their respective industries has evolved independently over time, forming a largely incoherent and inefficient overall transportation system. Travelers today are forced to spend unnecessary time and efforts planning a trip through varying modes of travel each with their own scheduling, pricing, and services; causing many travelers to simply rely on their relatively inefficient and expensive personal automobile. This paper presents a demonstration program system to not only collect and format many different sources of trip planning information, but also combine these independent modes of travel in order to form optimal routes and itineraries of travel. The results of this system show a mean decrease in inter-city travel time of 10 percent and a 25 percent reduction in carbon dioxide emissions over personal automobiles. Additionally, a 55 percent reduction in carbon dioxide emissions is observed for intra-city travel. A conclusion is that current resources are available, if somewhat hidden, to drastically improve point to point transportation in terms of time spent traveling, the cost of travel, and the ecological impact of a trip. Finally, future concepts are considered which could dramatically improve the interoperability and efficiency of the transportation infrastructure.

  17. Effects of Distress and Eustress on Changes in Fatigue from Waking to Working.

    PubMed

    Parker, Kelsey N; Ragsdale, Jennifer M

    2015-11-01

    As a potential indicator of strain, fatigue is an important outcome in occupational health research. The current study examined the influence of positive (eustress) and negative (distress) work experiences on changes in fatigue from morning to at-work. It was expected that within-person changes in fatigue from waking to working would be moderated by employees' experiences of stress, pain, happiness, and meaningfulness at work. Data on 1,195 full-time working adults were collected through the Bureau of Labor Statistics' 2010 American Time Use Study (ATUS) using a day reconstruction method to assess fatigue at two time points (morning and during work) and employees' eustress and distress experiences during work. Multilevel modeling showed that the indicators of distress, stress and pain, predicted higher morning fatigue and stronger increases in fatigue during the workday. The indicators of eustress, happiness and meaningfulness, predicted lower fatigue at both time points but not temporal changes. These results contribute to understanding changes in employees' fatigue and suggest that the differential effects of distress and eustress experiences at work may be important to consider in fatigue management interventions. © 2015 The International Association of Applied Psychology.

  18. An evaluation of long-term preservation methods for brown bear (Ursus arctos) faecal DNA samples

    USGS Publications Warehouse

    Murphy, M.A.; Waits, L.P.; Kendall, K.C.; Wasser, S.K.; Higbee, J.A.; Bogden, R.

    2002-01-01

    Relatively few large-scale faecal DNA studies have been initiated due to difficulties in amplifying low quality and quantity DNA template. To improve brown bear faecal DNA PCR amplification success rates and to determine post collection sample longevity, five preservation methods were evaluated: 90% ethanol, DETs buffer, silica-dried, oven-dried stored at room temperature, and oven-dried stored at -20??C. Preservation effectiveness was evaluated for 50 faecal samples by PCR amplification of a mitochondrial DNA (mtDNA) locus (???146 bp) and a nuclear DNA (nDNA) locus (???200 bp) at time points of one week, one month, three months and six months. Preservation method and storage time significantly impacted mtDNA and nDNA amplification success rates. For mtDNA, all preservation methods had ??? 75% success at one week, but storage time had a significant impact on the effectiveness of the silica preservation method. Ethanol preserved samples had the highest success rates for both mtDNA (86.5%) and nDNA (84%). Nuclear DNA amplification success rates ranged from 26-88%, and storage time had a significant impact on all methods but ethanol. Preservation method and storage time should be important considerations for researchers planning projects utilizing faecal DNA. We recommend preservation of faecal samples in 90% ethanol when feasible, although when collecting in remote field conditions or for both DNA and hormone assays a dry collection method may be advantageous.

  19. Detecting Statistically Significant Communities of Triangle Motifs in Undirected Networks

    DTIC Science & Technology

    2015-03-16

    moderately-sized networks. As a consequence, throughout this effort, a simulated annealing (SA) algorithm will be employed to effectively search the...then increment k by 1 and repeat the search to find z∗3. Once can continue to increment k until W < zδ, at which point the algorithm will stop and...collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources

  20. Towards a Modular, Robust, and Portable Sensing Platform for Biological and Point of Care Diagnostics

    DTIC Science & Technology

    2013-07-01

    drugs at potentially very low concentrations in a variety of complex media such as saliva, blood, urine , and other bodily fluids. These handheld...flow assays, such as pregnancy tests, disease and drug abuse screens, and blood protein markers, exhibit widespread use. Recent parallel advances...gadgets have the potential to lower the cost of diagnosis and save immense amounts of time by removing the need to collect, preserve, and ship samples

  1. Scopus database: a review.

    PubMed

    Burnham, Judy F

    2006-03-08

    The Scopus database provides access to STM journal articles and the references included in those articles, allowing the searcher to search both forward and backward in time. The database can be used for collection development as well as for research. This review provides information on the key points of the database and compares it to Web of Science. Neither database is inclusive, but complements each other. If a library can only afford one, choice must be based in institutional needs.

  2. Scopus database: a review

    PubMed Central

    Burnham, Judy F

    2006-01-01

    The Scopus database provides access to STM journal articles and the references included in those articles, allowing the searcher to search both forward and backward in time. The database can be used for collection development as well as for research. This review provides information on the key points of the database and compares it to Web of Science. Neither database is inclusive, but complements each other. If a library can only afford one, choice must be based in institutional needs. PMID:16522216

  3. A Model for Predicting Cognitive and Emotional Health from Structural and Functional Neurocircuitry Following Traumatic Brain Injury

    DTIC Science & Technology

    2016-10-01

    players : the NCAA Concussion Study . JAMA, 2003. 290(19): p. 2556-63. 3. Bogdanova, Y. and M. Verfaellie, Cognitive sequelae of blast-induced traumatic...football players : the NCAA concussion study , JAMA 290 (2003) 2556–2563. [22] L.C. Morey, Personality Assessment Inventory, Psychological Assessment...assessment. This study will address this problem by collecting measures of white matter integrity and concomitant neuropsychological status at five time points

  4. CGM-measured glucose values have a strong correlation with C-peptide, HbA1c and IDAAC, but do poorly in predicting C-peptide levels in the two years following onset of diabetes.

    PubMed

    Buckingham, Bruce; Cheng, Peiyao; Beck, Roy W; Kollman, Craig; Ruedy, Katrina J; Weinzimer, Stuart A; Slover, Robert; Bremer, Andrew A; Fuqua, John; Tamborlane, William

    2015-06-01

    The aim of this work was to assess the association between continuous glucose monitoring (CGM) data, HbA1c, insulin-dose-adjusted HbA1c (IDAA1c) and C-peptide responses during the first 2 years following diagnosis of type 1 diabetes. A secondary analysis was conducted of data collected from a randomised trial assessing the effect of intensive management initiated within 1 week of diagnosis of type 1 diabetes, in which mixed-meal tolerance tests were performed at baseline and at eight additional time points through 24 months. CGM data were collected at each visit. Among 67 study participants (mean age [± SD] 13.3 ± 5.7 years), HbA1c was inversely correlated with C-peptide at each time point (p < 0.001), as were changes in each measure between time points (p < 0.001). However, C-peptide at one visit did not predict the change in HbA1c at the next visit and vice versa. Higher C-peptide levels correlated with increased proportion of CGM glucose values between 3.9 and 7.8 mmol/l and lower CV (p = 0.001 and p = 0.02, respectively) but not with CGM glucose levels <3.9 mmol/l. Virtually all participants with IDAA1c < 9 retained substantial insulin secretion but when evaluated together with CGM, time in the range of 3.9-7.8 mmol/l and CV did not provide additional value in predicting C-peptide levels. In the first 2 years after diagnosis of type 1 diabetes, higher C-peptide levels are associated with increased sensor glucose levels in the target range and with lower glucose variability but not hypoglycaemia. CGM metrics do not provide added value over the IDAA1c in predicting C-peptide levels.

  5. Determining the sources of suspended sediment in a Mediterranean groundwater-dominated river: the Na Borges basin (Mallorca, Spain).

    NASA Astrophysics Data System (ADS)

    Estrany, Joan; Martinez-Carreras, Nuria

    2013-04-01

    Tracers have been acknowledged as a useful tool to identify sediment sources, based upon a variety of techniques and chemical and physical sediment properties. Sediment fingerprinting supports the notion that changes in sedimentation rates are not just related to increased/reduced erosion and transport in the same areas, but also to the establishment of different pathways increasing sediment connectivity. The Na Borges is a Mediterranean lowland agricultural river basin (319 km2) where traditional soil and water conservation practices have been applied over millennia to provide effective protection of cultivated land. During the twentieth century, industrialisation and pressure from tourism activities have increased urbanised surfaces, which have impacts on the processes that control streamflow. Within this context, source material sampling was focused in Na Borges on obtaining representative samples from potential sediment sources (comprised topsoil; i.e., 0-2 cm) susceptible to mobilisation by water and subsequent routing to the river channel network, while those representing channel bank sources were collected from actively eroding channel margins and ditches. Samples of road dust and of solids from sewage treatment plants were also collected. During two hydrological years (2004-2006), representative suspended sediment samples for use in source fingerprinting studies were collected at four flow gauging stations and at eight secondary sampling points using time-integrating sampling samplers. Likewise, representative bed-channel sediment samples were obtained using the resuspension approach at eight sampling points in the main stem of the Na Borges River. These deposits represent the fine sediment temporarily stored in the bed-channel and were also used for tracing source contributions. A total of 102 individual time-integrated sediment samples, 40 bulk samples and 48 bed-sediment samples were collected. Upon return to the laboratory, source material samples were oven-dried at 40° C, disaggregated using a pestle and mortar, and dry sieved to

  6. Self-regulatory processes mediate the intention-behavior relation for adherence and exercise behaviors.

    PubMed

    de Bruin, Marijn; Sheeran, Paschal; Kok, Gerjo; Hiemstra, Anneke; Prins, Jan M; Hospers, Harm J; van Breukelen, Gerard J P

    2012-11-01

    Understanding the gap between people's intentions and actual health behavior is an important issue in health psychology. Our aim in this study was to investigate whether self-regulatory processes (monitoring goal progress and responding to discrepancies) mediate the intention-behavior relation in relation to HIV medication adherence (Study 1) and intensive exercise behavior (Study 2). In Study 1, questionnaire and electronically monitored adherence data were collected at baseline and 3 months later from patients in the control arm of an HIV-adherence intervention study. In Study 2, questionnaire data was collected at 3 time points 6-weeks apart in a cohort study of physical activity. Complete data at all time points were obtained from 51 HIV-infected patients and 499 intensive exercise participants. Intentions were good predictors of behavior and explained 25 to 30% of the variance. Self-regulatory processes explained an additional 11% (Study 1) and 6% (Study 2) of variance in behavior on top of intentions. Regression and bootstrap analyses revealed at least partial, and possibly full, mediation of the intention-behavior relation by self-regulatory processes. The present studies indicate that self-regulatory processes may explain how intentions drive behavior. Future tests, using different health behaviors and experimental designs, could firmly establish whether self-regulatory processes complement current health behavior theories and should become routine targets for intervention. (PsycINFO Database Record (c) 2012 APA, all rights reserved).

  7. Brain activation to negative stimuli mediates a relationship between adolescent marijuana use and later emotional functioning.

    PubMed

    Heitzeg, Mary M; Cope, Lora M; Martz, Meghan E; Hardee, Jillian E; Zucker, Robert A

    2015-12-01

    This work investigated the impact of heavy marijuana use during adolescence on emotional functioning, as well as the brain functional mediators of this effect. Participants (n=40) were recruited from the Michigan Longitudinal Study (MLS). Data on marijuana use were collected prospectively beginning in childhood as part of the MLS. Participants were classified as heavy marijuana users (n=20) or controls with minimal marijuana use. Two facets of emotional functioning-negative emotionality and resiliency (a self-regulatory mechanism)-were assessed as part of the MLS at three time points: mean age 13.4, mean age 19.6, and mean age 23.1. Functional neuroimaging data during an emotion-arousal word task were collected at mean age 20.2. Negative emotionality decreased and resiliency increased across the three time points in controls but not heavy marijuana users. Compared with controls, heavy marijuana users had less activation to negative words in temporal, prefrontal, and occipital cortices, insula, and amygdala. Activation of dorsolateral prefrontal cortex to negative words mediated an association between marijuana group and later negative emotionality. Activation of the cuneus/lingual gyrus mediated an association between marijuana group and later resiliency. Results support growing evidence that heavy marijuana use during adolescence affects later emotional outcomes. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  8. Smoking increases risk for cognitive decline among community-dwelling older Mexican Americans

    PubMed Central

    Collins, Nicole; Sachs-Ericsson, Natalie; Preacher, Kristopher J.; Sheffield, Kristin M.; Markides, Kyriakos

    2011-01-01

    Objectives Few studies have investigated smoking and cognitive decline among older Mexican Americans. In the current study we explore the relationship between smoking status and cognitive changes over time in a large sample of community-dwelling older adults of Mexican descent. Design Latent growth curve analyses were used to examine the decreasing growth in the number of correct responses on a test of cognitive functioning with increasing age (7 years with 4 data collection points). Setting In-home interviews were obtained from participants residing in the Southwest United States. Participants Participants were community-dwelling older Mexican Americans. Measurements Cognitive functioning was assessed at each of the 4 data collection points with the Mini-Mental Status Examination. Participants’ self-reports of health functioning and smoking status were obtained at baseline. Results With the inclusion of health variables and other control variables, the effect of smoking status on cognitive functioning was significant such that the decrease in the number of correct responses over time was greater for smokers than for non-smokers. Conclusions Smoking increases risk for cognitive decline among community-dwelling older Mexican Americans. There are numerous health benefits in quitting smoking, even for older adults who have been smoking for many years. Further efforts to ensure that smoking cessation and prevention programs are targeted toward Hispanics are necessary. PMID:20104052

  9. [Less well-established forms of knowledge: new positionings in the field of collective mental health].

    PubMed

    Martínez-Hernáez, Angel; Correa-Urquiza, Martín

    2017-01-01

    Collective health is a paradigm with a long history in Latin America. Similarly, collective mental health has had an interesting development in certain Latin American countries, even acting to stimulate psychiatric reform. However, both paradigms appear to be encapsulated in specific times and places, among other reasons because of a hegemonic global-scale epistemology that, by imposing a naturalized model of truth, denies other forms of knowledge the opportunity to question not only already-established disease categories, treatment protocols and health policies, but the established order itself. In this article, we reflect on the power of ethnography, as both a form of knowledge and a social relation in itself, to broaden the space available for a possible field of collective health in a context where it is still incipient: Europe. The ethnographic point of view allows us to rethink that which is already accepted, creating permeability in entrenched practices and opening up surprising new possibilities.

  10. Mnemonic convergence in social networks: The emergent properties of cognition at a collective level.

    PubMed

    Coman, Alin; Momennejad, Ida; Drach, Rae D; Geana, Andra

    2016-07-19

    The development of shared memories, beliefs, and norms is a fundamental characteristic of human communities. These emergent outcomes are thought to occur owing to a dynamic system of information sharing and memory updating, which fundamentally depends on communication. Here we report results on the formation of collective memories in laboratory-created communities. We manipulated conversational network structure in a series of real-time, computer-mediated interactions in fourteen 10-member communities. The results show that mnemonic convergence, measured as the degree of overlap among community members' memories, is influenced by both individual-level information-processing phenomena and by the conversational social network structure created during conversational recall. By studying laboratory-created social networks, we show how large-scale social phenomena (i.e., collective memory) can emerge out of microlevel local dynamics (i.e., mnemonic reinforcement and suppression effects). The social-interactionist approach proposed herein points to optimal strategies for spreading information in social networks and provides a framework for measuring and forging collective memories in communities of individuals.

  11. MAGNA (Materially and Geometrically Nonlinear Analysis). Part II. Preprocessor Manual.

    DTIC Science & Technology

    1982-12-01

    AGRID can accept a virtually arbitrary collection of point coor- dinates which lie on a surface of interest, and generate a regular grid of mesh points...in the form of a collection of such patches to be translated into an assemblage of biquadratic surface elements (see Subsection 2.1, Figure 2.2...using IMPRESS can be converted for use with the present preprocessor by means of the IMPRINT translator. IMPRINT is a collection of conversion routines

  12. Phylogenetic characterisation of circulating, clinical influenza isolates from Bali, Indonesia: preliminary report from the BaliMEI project.

    PubMed

    Adisasmito, W; Budayanti, S N; Aisyah, D N; Gallo Cassarino, T; Rudge, J W; Watson, S J; Kozlakidis, Z; Smith, G J D; Coker, R

    2017-08-23

    Human influenza represents a major public health concern, especially in south-east Asia where the risk of emergence and spread of novel influenza viruses is particularly high. The BaliMEI study aims to conduct a five year active surveillance and characterisation of influenza viruses in Bali using an extensive network of participating healthcare facilities. Samples were collected during routine diagnostic treatment in healthcare facilities. In addition to standard clinical and molecular methods for influenza typing, next generation sequencing and subsequent de novo genome assembly were performed to investigate the phylogeny of the collected patient samples. The samples collected are characteristic of the seasonally circulating influenza viruses with indications of phylogenetic links to other samples characterised in neighbouring countries during the same time period. There were some strong phylogenetic links with sequences from samples collected in geographically proximal regions, with some of the samples from the same time-period resulting to small clusters at the tree-end points. However this work, which is the first of its kind completely performed within Indonesia, supports the view that the circulating seasonal influenza in Bali reflects the strains circulating in geographically neighbouring areas as would be expected to occur within a busy regional transit centre.

  13. Exercise intensity and its impact on relationships between salivary immunoglobulin A, saliva flow rate and plasma cortisol concentration.

    PubMed

    Leicht, Christof A; Goosey-Tolfrey, Victoria L; Bishop, Nicolette C

    2018-06-01

    Salivary secretory immunoglobulin A (sIgA), saliva flow rate and plasma cortisol concentrations have been shown to be influenced by exercise, particularly the intensity exercise is performed at, and circadian variation. The autonomic nervous system partly regulates salivary secretion, but it is not yet known whether cortisol also explains some variation in salivary parameters. Twelve moderately trained male individuals ([Formula: see text] peak legs : 46.2 ± 6.8 mL·kg -1 ·min -1 ) performed three 45-min constant load exercise trials in the morning: arm cranking exercise at 60%[Formula: see text] peak arms ; moderate cycling at 60%[Formula: see text] peak legs ; and easy cycling at 60%[Formula: see text] peak arms . Timed saliva samples and blood samples for plasma cortisol concentration determination were obtained before, post, 2 h post, and 4 h post-exercise. Saliva was collected in an additional resting trial at the same time points. At each time point for each exercise trial, negative correlations between cortisol and saliva flow rate (explaining 25 ± 17% of the variance, R 2  = 0.002-0.46) and positive correlations between cortisol and sIgA concentration (explaining 8 ± 8% of the variance R 2  = 0.002-0.24) were found. Saliva flow rate increased over time, whereas sIgA concentration and cortisol decreased over time for all trials (P < 0.05), there was no effect of time for sIgA secretion rate (P = 0.16). These results show a relationship between cortisol and saliva flow rate, which directly impacts on the concentration of salivary analytes. This study further confirms circadian variations in salivary parameters which must be acknowledged when standardising salivary data collection.

  14. 76 FR 48118 - Notice of Request for Approval of an Information Collection; Brucellosis First Point Testing of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-08

    ... DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service [Docket No. APHIS-2011-0063] Notice of Request for Approval of an Information Collection; Brucellosis First Point Testing of Cattle and Bison; Brucellosis Standard Card Test AGENCY: Animal and Plant Health Inspection Service, USDA...

  15. The social ecology of water in a Mumbai slum: failures in water quality, quantity, and reliability.

    PubMed

    Subbaraman, Ramnath; Shitole, Shrutika; Shitole, Tejal; Sawant, Kiran; O'Brien, Jennifer; Bloom, David E; Patil-Deshmukh, Anita

    2013-02-26

    Urban slums in developing countries that are not recognized by the government often lack legal access to municipal water supplies. This results in the creation of insecure "informal" water distribution systems (i.e., community-run or private systems outside of the government's purview) that may increase water-borne disease risk. We evaluate an informal water distribution system in a slum in Mumbai, India using commonly accepted health and social equity indicators. We also identify predictors of bacterial contamination of drinking water using logistic regression analysis. Data were collected through two studies: the 2008 Baseline Needs Assessment survey of 959 households and the 2011 Seasonal Water Assessment, in which 229 samples were collected for water quality testing over three seasons. Water samples were collected in each season from the following points along the distribution system: motors that directly tap the municipal supply (i.e., "point-of-source" water), hoses going to slum lanes, and storage and drinking water containers from 21 households. Depending on season, households spend an average of 52 to 206 times more than the standard municipal charge of Indian rupees 2.25 (US dollars 0.04) per 1000 liters for water, and, in some seasons, 95% use less than the WHO-recommended minimum of 50 liters per capita per day. During the monsoon season, 50% of point-of-source water samples were contaminated. Despite a lack of point-of-source water contamination in other seasons, stored drinking water was contaminated in all seasons, with rates as high as 43% for E. coli and 76% for coliform bacteria. In the multivariate logistic regression analysis, monsoon and summer seasons were associated with significantly increased odds of drinking water contamination. Our findings reveal severe deficiencies in water-related health and social equity indicators. All bacterial contamination of drinking water occurred due to post-source contamination during storage in the household, except during the monsoon season, when there was some point-of-source water contamination. This suggests that safe storage and household water treatment interventions may improve water quality in slums. Problems of exorbitant expense, inadequate quantity, and poor point-of-source quality can only be remedied by providing unrecognized slums with equitable access to municipal water supplies.

  16. The social ecology of water in a Mumbai slum: failures in water quality, quantity, and reliability

    PubMed Central

    2013-01-01

    Background Urban slums in developing countries that are not recognized by the government often lack legal access to municipal water supplies. This results in the creation of insecure “informal” water distribution systems (i.e., community-run or private systems outside of the government’s purview) that may increase water-borne disease risk. We evaluate an informal water distribution system in a slum in Mumbai, India using commonly accepted health and social equity indicators. We also identify predictors of bacterial contamination of drinking water using logistic regression analysis. Methods Data were collected through two studies: the 2008 Baseline Needs Assessment survey of 959 households and the 2011 Seasonal Water Assessment, in which 229 samples were collected for water quality testing over three seasons. Water samples were collected in each season from the following points along the distribution system: motors that directly tap the municipal supply (i.e., “point-of-source” water), hoses going to slum lanes, and storage and drinking water containers from 21 households. Results Depending on season, households spend an average of 52 to 206 times more than the standard municipal charge of Indian rupees 2.25 (US dollars 0.04) per 1000 liters for water, and, in some seasons, 95% use less than the WHO-recommended minimum of 50 liters per capita per day. During the monsoon season, 50% of point-of-source water samples were contaminated. Despite a lack of point-of-source water contamination in other seasons, stored drinking water was contaminated in all seasons, with rates as high as 43% for E. coli and 76% for coliform bacteria. In the multivariate logistic regression analysis, monsoon and summer seasons were associated with significantly increased odds of drinking water contamination. Conclusions Our findings reveal severe deficiencies in water-related health and social equity indicators. All bacterial contamination of drinking water occurred due to post-source contamination during storage in the household, except during the monsoon season, when there was some point-of-source water contamination. This suggests that safe storage and household water treatment interventions may improve water quality in slums. Problems of exorbitant expense, inadequate quantity, and poor point-of-source quality can only be remedied by providing unrecognized slums with equitable access to municipal water supplies. PMID:23442300

  17. Scanning fluorescent microthermal imaging apparatus and method

    DOEpatents

    Barton, D.L.; Tangyunyong, P.

    1998-01-06

    A scanning fluorescent microthermal imaging (FMI) apparatus and method is disclosed, useful for integrated circuit (IC) failure analysis, that uses a scanned and focused beam from a laser to excite a thin fluorescent film disposed over the surface of the IC. By collecting fluorescent radiation from the film, and performing point-by-point data collection with a single-point photodetector, a thermal map of the IC is formed to measure any localized heating associated with defects in the IC. 1 fig.

  18. A catalog of rules, variables, and definitions applied to accelerometer data in the National Health and Nutrition Examination Survey, 2003-2006.

    PubMed

    Tudor-Locke, Catrine; Camhi, Sarah M; Troiano, Richard P

    2012-01-01

    The National Health and Nutrition Examination Survey (NHANES) included accelerometry in the 2003-2006 data collection cycles. Researchers have used these data since their release in 2007, but the data have not been consistently treated, examined, or reported. The objective of this study was to aggregate data from studies using NHANES accelerometry data and to catalogue study decision rules, derived variables, and cut point definitions to facilitate a more uniform approach to these data. We conducted a PubMed search of English-language articles published (or indicated as forthcoming) from January 2007 through December 2011. Our initial search yielded 74 articles, plus 1 article that was not indexed in PubMed. After excluding 21 articles, we extracted and tabulated details on 54 studies to permit comparison among studies. The 54 articles represented various descriptive, methodological, and inferential analyses. Although some decision rules for treating data (eg, criteria for minimal wear-time) were consistently applied, cut point definitions used for accelerometer-derived variables (eg, time spent in various intensities of physical activity) were especially diverse. Unique research questions may require equally unique analytical approaches; some inconsistency in approaches must be tolerated if scientific discovery is to be encouraged. This catalog provides a starting point for researchers to consider relevant and/or comparable accelerometer decision rules, derived variables, and cut point definitions for their own research questions.

  19. Tissue adhesive skills study: the physician learning curve.

    PubMed

    Lin, Michelle; Coates, Wendy C; Lewis, Roger J

    2004-04-01

    To compare 2 educational approaches (structured group session vs. individual instruction) of learning application techniques of 2-octylcyanoacrylate (OCA) on wounds repaired in the emergency department. This prospective, nonrandomized, observational study was conducted in an urban hospital emergency department. Medical students, residents, and faculty were trained in the use of OCA either in a standardized group session or individually, based on their availability to attend the group session. Physicians completed a data collection form that included wound characteristics, type of instruction, and number of lacerations previously repaired with OCA. Impressions of time required, difficulty, and postrepair cosmesis were each recorded on a 5-point Likert scale. The 3 scales were totaled to yield a 15-point summary outcome measure. Univariate nonparametric comparisons of measures were performed between physicians with and without group instruction and between those with and without prior OCA experience. Using 35 subjects in each group, this study had a power of 0.95 to detect a difference of 1.5 points in the 15-point summary score, using alpha = 0.05. Eighty-one subjects were enrolled; the median summary score was 13 (IQR 12 to 15). There was no statistically significant difference in the summary score, nor any of its 3 components (time saved, difficulty, cosmesis), when comparing physicians with and without group instruction, nor when comparing first-time users to those with prior experience. OCA application is an easily acquired skill. Physicians were satisfied with their proficiency in OCA application, regardless of type of instruction received or number of previous lacerations repaired with OCA.

  20. Soil Moisture Monitoring using Surface Electrical Resistivity measurements

    NASA Astrophysics Data System (ADS)

    Calamita, Giuseppe; Perrone, Angela; Brocca, Luca; Straface, Salvatore

    2017-04-01

    The relevant role played by the soil moisture (SM) for global and local natural processes results in an explicit interest for its spatial and temporal estimation in the vadose zone coming from different scientific areas - i.e. eco-hydrology, hydrogeology, atmospheric research, soil and plant sciences, etc... A deeper understanding of natural processes requires the collection of data on a higher number of points at increasingly higher spatial scales in order to validate hydrological numerical simulations. In order to take the best advantage of the Electrical Resistivity (ER) data with their non-invasive and cost-effective properties, sequential Gaussian geostatistical simulations (sGs) can be applied to monitor the SM distribution into the soil by means of a few SM measurements and a densely regular ER grid of monitoring. With this aim, co-located SM measurements using mobile TDR probes (MiniTrase), and ER measurements, obtained by using a four-electrode device coupled with a geo-resistivimeter (Syscal Junior), were collected during two surveys carried out on a 200 × 60 m2 area. Two time surveys were carried out during which Data were collected at a depth of around 20 cm for more than 800 points adopting a regular grid sampling scheme with steps (5 m) varying according to logistic and soil compaction constrains. The results of this study are robust due to the high number of measurements available for either variables which strengthen the confidence in the covariance function estimated. Moreover, the findings obtained using sGs show that it is possible to estimate soil moisture variations in the pedological zone by means of time-lapse electrical resistivity and a few SM measurements.

  1. Duration of oral contraceptive use predicts women's initial and subsequent subjective responses to sexual stimuli.

    PubMed

    Renfro, Kaytlin J; Rupp, Heather; Wallen, Kim

    2015-09-01

    Recent work suggests that a woman's hormonal state when first exposed to visual sexual stimuli (VSS) modulates her initial and subsequent responses to VSS. The present study investigated whether women's initial hormonal state was related to their subjective ratings of VSS, and whether this relationship differed with VSS content. We reanalyzed previously collected data from 14 naturally cycling (NC) women and 14 women taking oral contraceptives (OCs), who subjectively rated VSS at three hormonal time-points. NC women's ratings of 216 unique sexual images were collected during the menstrual, periovulatory, and luteal phases of their menstrual cycles, and OC women's ratings were collected at comparable time-points across their pill-cycles. NC women's initial hormonal state was not related to their ratings of VSS. OC women's initial hormonal state predicted their ratings of VSS with minimal contextual information and of images depicting female-to-male oral sex. Specifically, women who entered the study in the third week of their pill-cycle (OC-3 women) rated such images as less attractive at all testing sessions than did all other women. OC-3 women were also the only women to rate decontextualized VSS as unattractive at all testing sessions. These results corroborate previous studies in which women's initial hormonal state was found to predict subsequent interest in sexual stimuli. Future work, with larger samples, should more directly investigate whether OC-3 women's negative assessment of specific types of VSS reflects a reaction to the laboratory environment or a broader mechanism, wherein OC women's sexual interests decrease late in their pill-cycle. Copyright © 2015 Elsevier Inc. All rights reserved.

  2. Contaminant point source localization error estimates as functions of data quantity and model quality

    DOE PAGES

    Hansen, Scott K.; Vesselinov, Velimir Valentinov

    2016-10-01

    We develop empirically-grounded error envelopes for localization of a point contamination release event in the saturated zone of a previously uncharacterized heterogeneous aquifer into which a number of plume-intercepting wells have been drilled. We assume that flow direction in the aquifer is known exactly and velocity is known to within a factor of two of our best guess from well observations prior to source identification. Other aquifer and source parameters must be estimated by interpretation of well breakthrough data via the advection-dispersion equation. We employ high performance computing to generate numerous random realizations of aquifer parameters and well locations, simulatemore » well breakthrough data, and then employ unsupervised machine optimization techniques to estimate the most likely spatial (or space-time) location of the source. Tabulating the accuracy of these estimates from the multiple realizations, we relate the size of 90% and 95% confidence envelopes to the data quantity (number of wells) and model quality (fidelity of ADE interpretation model to actual concentrations in a heterogeneous aquifer with channelized flow). We find that for purely spatial localization of the contaminant source, increased data quantities can make up for reduced model quality. For space-time localization, we find similar qualitative behavior, but significantly degraded spatial localization reliability and less improvement from extra data collection. Since the space-time source localization problem is much more challenging, we also tried a multiple-initial-guess optimization strategy. Furthermore, this greatly enhanced performance, but gains from additional data collection remained limited.« less

  3. Mapping simulated scenes with skeletal remains using differential GPS in open environments: an assessment of accuracy and practicality.

    PubMed

    Walter, Brittany S; Schultz, John J

    2013-05-10

    Scene mapping is an integral aspect of processing a scene with scattered human remains. By utilizing the appropriate mapping technique, investigators can accurately document the location of human remains and maintain a precise geospatial record of evidence. One option that has not received much attention for mapping forensic evidence is the differential global positioning (DGPS) unit, as this technology now provides decreased positional error suitable for mapping scenes. Because of the lack of knowledge concerning this utility in mapping a scene, controlled research is necessary to determine the practicality of using newer and enhanced DGPS units in mapping scattered human remains. The purpose of this research was to quantify the accuracy of a DGPS unit for mapping skeletal dispersals and to determine the applicability of this utility in mapping a scene with dispersed remains. First, the accuracy of the DGPS unit in open environments was determined using known survey markers in open areas. Secondly, three simulated scenes exhibiting different types of dispersals were constructed and mapped in an open environment using the DGPS. Variables considered during data collection included the extent of the dispersal, data collection time, data collected on different days, and different postprocessing techniques. Data were differentially postprocessed and compared in a geographic information system (GIS) to evaluate the most efficient recordation methods. Results of this study demonstrate that the DGPS is a viable option for mapping dispersed human remains in open areas. The accuracy of collected point data was 11.52 and 9.55 cm for 50- and 100-s collection times, respectfully, and the orientation and maximum length of long bones was maintained. Also, the use of error buffers for point data of bones in maps demonstrated the error of the DGPS unit, while showing that the context of the dispersed skeleton was accurately maintained. Furthermore, the application of a DGPS for accurate scene mapping is discussed and guidelines concerning the implementation of this technology for mapping human scattered skeletal remains in open environments are provided. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  4. Microbial Community Changes in Hydraulic Fracturing Fluids and Produced Water from Shale Gas Extraction

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mohan, Arvind Murali; Hartsock, Angela; Bibby, Kyle J

    2013-11-19

    Microbial communities associated with produced water from hydraulic fracturing are not well understood, and their deleterious activity can lead to significant increases in production costs and adverse environmental impacts. In this study, we compared the microbial ecology in prefracturing fluids (fracturing source water and fracturing fluid) and produced water at multiple time points from a natural gas well in southwestern Pennsylvania using 16S rRNA gene-based clone libraries, pyrosequencing, and quantitative PCR. The majority of the bacterial community in prefracturing fluids constituted aerobic species affiliated with the class Alphaproteobacteria. However, their relative abundance decreased in produced water with an increase inmore » halotolerant, anaerobic/facultative anaerobic species affiliated with the classes Clostridia, Bacilli, Gammaproteobacteria, Epsilonproteobacteria, Bacteroidia, and Fusobacteria. Produced water collected at the last time point (day 187) consisted almost entirely of sequences similar to Clostridia and showed a decrease in bacterial abundance by 3 orders of magnitude compared to the prefracturing fluids and produced water samplesfrom earlier time points. Geochemical analysis showed that produced water contained higher concentrations of salts and total radioactivity compared to prefracturing fluids. This study provides evidence of long-term subsurface selection of the microbial community introduced through hydraulic fracturing, which may include significant implications for disinfection as well as reuse of produced water in future fracturing operations.« less

  5. Social Identification in Sports Teams: The Role of Personal, Social, and Collective Identity Motives.

    PubMed

    Thomas, William E; Brown, Rupert; Easterbrook, Matthew J; Vignoles, Vivian L; Manzi, Claudia; D'Angelo, Chiara; Holt, Jeremy J

    2017-04-01

    Based on motivated identity construction theory (MICT; Vignoles, 2011), we offer an integrative approach examining the combined roles of six identity motives (self-esteem, distinctiveness, belonging, meaning, continuity, and efficacy) instantiated at three different motivational levels (personal, social, and collective identity) as predictors of group identification. These identity processes were investigated among 369 members of 45 sports teams from England and Italy in a longitudinal study over 6 months with four time points. Multilevel change modeling and cross-lagged analyses showed that satisfaction of four personal identity motives (individuals' personal feelings of self-esteem, distinctiveness, meaning, and efficacy derived from team membership), three social identity motives (individuals' feelings that the team identity carries a sense of belonging, meaning, and continuity), and one collective identity motive (a shared belief in group distinctiveness) significantly predicted group identification. Motivational processes underlying group identification are complex, multilayered, and not reducible to personal needs.

  6. Coastal single-beam bathymetry data collected in 2015 from Raccoon Point to Point Au Fer Island, Louisiana

    USGS Publications Warehouse

    Stalk, Chelsea A.; DeWitt, Nancy T.; Kindinger, Jack L.; Flocks, James G.; Reynolds, Billy J.; Kelso, Kyle W.; Fredericks, Joseph J.; Tuten, Thomas M.

    2017-03-10

    As part of the Barrier Island Comprehensive Monitoring Program (BICM), scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted a nearshore single-beam bathymetry survey along the south-central coast of Louisiana, from Raccoon Point to Point Au Fer Island, in July 2015. The goal of the BICM program is to provide long-term data on Louisiana’s coastline and use this data to plan, design, evaluate, and maintain current and future barrier island restoration projects. The data described in this report will provide baseline bathymetric information for future research investigating island evolution, sediment transport, and recent and long-term geomorphic change, and will support modeling of future changes in response to restoration and storm impacts. The survey area encompasses more than 300 square kilometers of nearshore environment from Raccoon Point to Point Au Fer Island. This data series serves as an archive of processed single-beam bathymetry data, collected from July 22–29, 2015, under USGS Field Activity Number 2015-320-FA. Geographic information system data products include a 200-meter-cell-size interpolated bathymetry grid, trackline maps, and point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata.

  7. Fine-resolution repeat topographic surveying of dryland landscapes using UAS-based structure-from-motion photogrammetry: Assessing accuracy and precision against traditional ground-based erosion measurements

    USGS Publications Warehouse

    Gillian, Jeffrey K.; Karl, Jason W.; Elaksher, Ahmed; Duniway, Michael C.

    2017-01-01

    Structure-from-motion (SfM) photogrammetry from unmanned aerial system (UAS) imagery is an emerging tool for repeat topographic surveying of dryland erosion. These methods are particularly appealing due to the ability to cover large landscapes compared to field methods and at reduced costs and finer spatial resolution compared to airborne laser scanning. Accuracy and precision of high-resolution digital terrain models (DTMs) derived from UAS imagery have been explored in many studies, typically by comparing image coordinates to surveyed check points or LiDAR datasets. In addition to traditional check points, this study compared 5 cm resolution DTMs derived from fixed-wing UAS imagery with a traditional ground-based method of measuring soil surface change called erosion bridges. We assessed accuracy by comparing the elevation values between DTMs and erosion bridges along thirty topographic transects each 6.1 m long. Comparisons occurred at two points in time (June 2014, February 2015) which enabled us to assess vertical accuracy with 3314 data points and vertical precision (i.e., repeatability) with 1657 data points. We found strong vertical agreement (accuracy) between the methods (RMSE 2.9 and 3.2 cm in June 2014 and February 2015, respectively) and high vertical precision for the DTMs (RMSE 2.8 cm). Our results from comparing SfM-generated DTMs to check points, and strong agreement with erosion bridge measurements suggests repeat UAS imagery and SfM processing could replace erosion bridges for a more synoptic landscape assessment of shifting soil surfaces for some studies. However, while collecting the UAS imagery and generating the SfM DTMs for this study was faster than collecting erosion bridge measurements, technical challenges related to the need for ground control networks and image processing requirements must be addressed before this technique could be applied effectively to large landscapes.

  8. Health care encounters in Danish chiropractic practice from a consumer perspectives - a mixed methods investigation.

    PubMed

    Myburgh, Corrie; Boyle, Eleanor; Larsen, Johanne Brinch; Christensen, Henrik Wulff

    2016-01-01

    Perceived value is the key ingredient to carving and maintaining a competitive business niche. The opportunities to interact with consumers to understand and enhance perceived value are termed 'touch points'. Due to the out-of-pocket expense incurred by patients, Danish chiropractors are subject to consumer trends and behaviors. The purpose of this investigation was to explore and describe consumer touch points relevant to perceived value through healthcare journeys in chiropractic practices. We designed a convergent parallel, mixed methods study. Our purposive sampling framework identified 11 chiropractic clinics from which we collected observational field notes, video recordings and face-to-face interviews. Data was collected between April 14(th) and June 26(th) 2014. We described the exteriors and interiors of all participant clinics, interviewed 32 staff members, 12 new patients and 36 follow-up patients and finally video recorded 11 new and 24 follow-up consultations. Categorization and analysis led to the emergence six consumer touch point themes: 'the internet', 'the physical environment', 'practice models', 'administrative staff', 'the consultation sequence and timing' and 'a consultation that adds value'. The Internet functions as a tool when choosing/confirming a clinic as appropriate, developing and initial image and managing appointments. The administrative hub appears integral to the shaping of positive consumer experiences outside of the consultation. Clinic location, practice model and interior design may contribute to context effects and thus may influence value perception during the clinical encounter. The duration of hands-on treatment received from the chiropractor is not an apparent consumer focus point. Rather, through a seven stage clinical procedure patients value consultations with clinicians who demonstrate professional competence by effective communication diagnosis/management and facilitating satisfactory treatment outcomes. At least six consumer touch points add/detract from value-related experiences in chiropractic practices. The duration of hands-on treatment per se does not appear to be a particular focus point. More research is required to explore this issue.

  9. The Building America Indoor Temperature and Humidity Measurement Protocol

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Metzger, C.; Norton, Paul

    2014-02-01

    When modeling homes using simulation tools, the heating and cooling set points can have a significant impact on home energy use. Every four years, the Energy Information Administration (EIA) Residential Energy Consumption Survey (RECS) asks homeowners about their heating and cooling set points. Unfortunately, no temperature data is measured, and most of the time, the homeowner may be guessing at this number. Even one degree Fahrenheit difference in heating set point can make a 5% difference in heating energy use! So, the survey-based RECS data cannot be used as the definitive reference for the set point for the "average occupant"more » in simulations. The purpose of this document is to develop a protocol for collecting consistent data for heating/cooling set points and relative humidity so that an average set point can be determined for asset energy models in residential buildings. This document covers the decision making process for researchers to determine how many sensors should be placed in each home, where to put those sensors, and what kind of asset data should be taken while they are in the home. The authors attempted to design the protocols to maximize the value of this study and minimize the resources required to achieve that value.« less

  10. Building America Indoor Temperature and Humidity Measurement Protocol

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Engebrecht-Metzger, Cheryn; Norton, Paul

    2014-02-01

    When modeling homes using simulation tools, the heating and cooling set points can have a significant impact on home energy use. Every 4 years the Energy Information Administration (EIA) Residential Energy Consumption Survey (RECS) asks homeowners about their heating and cooling set points. Unfortunately, no temperature data is measured, and most of the time, the homeowner may be guessing at this number. Even one degree Fahrenheit difference in heating set point can make a 5% difference in heating energy use! So, the survey-based RECS data cannot be used as the definitive reference for the set point for the 'average occupant'more » in simulations. The purpose of this document is to develop a protocol for collecting consistent data for heating/cooling set points and relative humidity so that an average set point can be determined for asset energy models in residential buildings. This document covers the decision making process for researchers to determine how many sensors should be placed in each home, where to put those sensors, and what kind of asset data should be taken while they are in the home. The authors attempted to design the protocols to maximize the value of this study and minimize the resources required to achieve that value.« less

  11. Vendor compliance with Ontario's tobacco point of sale legislation.

    PubMed

    Dubray, Jolene M; Schwartz, Robert M; Garcia, John M; Bondy, Susan J; Victor, J Charles

    2009-01-01

    On May 31, 2006, Ontario joined a small group of international jurisdictions to implement legislative restrictions on tobacco point of sale promotions. This study compares the presence of point of sale promotions in the retail tobacco environment from three surveys: one prior to and two following implementation of the legislation. Approximately 1,575 tobacco vendors were randomly selected for each survey. Each regionally-stratified sample included equal numbers of tobacco vendors categorized into four trade classes: chain convenience, independent convenience and discount, gas stations, and grocery. Data regarding the six restricted point of sale promotions were collected using standardized protocols and inspection forms. Weighted estimates and 95% confidence intervals were produced at the provincial, regional and vendor trade class level using the bootstrap method for estimating variance. At baseline, the proportion of tobacco vendors who did not engage in each of the six restricted point of sale promotions ranged from 41% to 88%. Within four months following implementation of the legislation, compliance with each of the six restricted point of sale promotions exceeded 95%. Similar levels of compliance were observed one year later. Grocery stores had the fewest point of sale promotions displayed at baseline. Compliance rates did not differ across vendor trade classes at either follow-up survey. Point of sale promotions did not differ across regions in any of the three surveys. Within a short period of time, a high level of compliance with six restricted point of sale promotions was achieved.

  12. Trace-metal contamination in the glacierized Rio Santa watershed, Peru.

    PubMed

    Guittard, Alexandre; Baraer, Michel; McKenzie, Jeffrey M; Mark, Bryan G; Wigmore, Oliver; Fernandez, Alfonso; Rapre, Alejo C; Walsh, Elizabeth; Bury, Jeffrey; Carey, Mark; French, Adam; Young, Kenneth R

    2017-11-25

    The objective of this research is to characterize the variability of trace metals in the Rio Santa watershed based on synoptic sampling applied at a large scale. To that end, we propose a combination of methods based on the collection of water, suspended sediments, and riverbed sediments at different points of the watershed within a very limited period. Forty points within the Rio Santa watershed were sampled between June 21 and July 8, 2013. Forty water samples, 36 suspended sediments, and 34 riverbed sediments were analyzed for seven trace metals. The results, which were normalized using the USEPA guideline for water and sediments, show that the Rio Santa water exhibits Mn concentrations higher than the guideline at more than 50% of the sampling points. As is the second highest contaminating element in the water, with approximately 10% of the samples containing concentrations above the guideline. Sediments collected in the Rio Santa riverbed were heavily contaminated by at least four of the tested elements at nearly 85% of the sample points, with As presenting the highest normalized concentration, at more than ten times the guideline. As, Cd, Fe, Pb, and Zn present similar concentration trends in the sediment all along the Rio Santa.The findings indicate that care should be taken in using the Rio Santa water and sediments for purposes that could affect the health of humans or the ecosystem. The situation is worse in some tributaries in the southern part of the watershed that host both active and abandoned mines and ore-processing plants.

  13. Atmosphere Mitigation in Precise Point Positioning Ambiguity Resolution for Earthquake Early Warning in the Western U.S.

    NASA Astrophysics Data System (ADS)

    Geng, J.; Bock, Y.; Reuveni, Y.

    2014-12-01

    Earthquake early warning (EEW) is a time-critical system and typically relies on seismic instruments in the area around the source to detect P waves (or S waves) and rapidly issue alerts. Thanks to the rapid development of real-time Global Navigation Satellite Systems (GNSS), a good number of sensors have been deployed in seismic zones, such as the western U.S. where over 600 GPS stations are collecting 1-Hz high-rate data along the Cascadia subduction zone, San Francisco Bay area, San Andreas fault, etc. GNSS sensors complement the seismic sensors by recording the static offsets while seismic data provide highly-precise higher frequency motions. An optimal combination of GNSS and accelerometer data (seismogeodesy) has advantages compared to GNSS-only or seismic-only methods and provides seismic velocity and displacement waveforms that are precise enough to detect P wave arrivals, in particular in the near source region. Robust real-time GNSS and seismogeodetic analysis is challenging because it requires a period of initialization and continuous phase ambiguity resolution. One of the limiting factors is unmodeled atmospheric effects, both of tropospheric and ionospheric origin. One mitigation approach is to introduce atmospheric corrections into precise point positioning with ambiguity resolution (PPP-AR) of clients/stations within the monitored regions. NOAA generates hourly predictions of zenith troposphere delays at an accuracy of a few centimeters, and 15-minute slant ionospheric delays of a few TECU (Total Electron Content Unit) accuracy from both geodetic and meteorological data collected at hundreds of stations across the U.S. The Scripps Orbit and Permanent Array Center (SOPAC) is experimenting with a regional ionosphere grid using a few hundred stations in southern California, and the International GNSS Service (IGS) routinely estimates a Global Ionosphere Map using over 100 GNSS stations. With these troposphere and ionosphere data as additional observations, we can shorten the initialization period and improve the ambiguity resolution efficiency of PPP-AR. We demonstrate this with data collected by a cluster of Real-Time Earthquake Analysis for Disaster mItigation (READI) network stations in southern California operated by UNAVCO/PBO and SOPAC.

  14. Using Deep Space Climate Observatory Measurements to Study the Earth as an Exoplanet

    NASA Astrophysics Data System (ADS)

    Jiang, Jonathan H.; Zhai, Albert J.; Herman, Jay; Zhai, Chengxing; Hu, Renyu; Su, Hui; Natraj, Vijay; Li, Jiazheng; Xu, Feng; Yung, Yuk L.

    2018-07-01

    Even though it was not designed as an exoplanetary research mission, the Deep Space Climate Observatory ( DSCOVR ) has been opportunistically used for a novel experiment in which Earth serves as a proxy exoplanet. More than 2 yr of DSCOVR Earth images were employed to produce time series of multiwavelength, single-point light sources in order to extract information on planetary rotation, cloud patterns, surface type, and orbit around the Sun. In what follows, we assume that these properties of the Earth are unknown and instead attempt to derive them from first principles. These conclusions are then compared with known data about our planet. We also used the DSCOVR data to simulate phase-angle changes, as well as the minimum data collection rate needed to determine the rotation period of an exoplanet. This innovative method of using the time evolution of a multiwavelength, reflected single-point light source can be deployed for retrieving a range of intrinsic properties of an exoplanet around a distant star.

  15. Screening and identification of novel B cell epitopes of Toxoplasma gondii SAG1.

    PubMed

    Wang, Yanhua; Wang, Guangxiang; Zhang, Delin; Yin, Hong; Wang, Meng

    2013-04-30

    The identification of protein epitopes is useful for diagnostic purposes and for the development of peptide vaccines. In this study, the epitopes of Toxoplasma gondii SAG1 were identified using synthetic peptide techniques with the aid of bioinformatics. Eleven peptides derived from T. gondii SAG1 were assessed by ELISA using pig sera from different time points after infection. Four (PS4, PS6, PS10 and PS11), out of the eleven peptides tested were recognized by all sera. Then, shorter peptides that were derived from PS4, PS6, PS10 and PS11 were predicted using bioinformatics and tested by experimentation. Four out of nine shorter peptides were identified successfully (amino acids 106-120, 166-180, 289-300 and 313-332). We have precisely located the epitopes of T. gondii SAG1 using pig sera collected at different time points after infection. The identified epitopes may be useful for the further study of epitope-based vaccines and diagnostic reagents.

  16. Innovative Near Real-Time Data Dissemination Tools Developed by the Space Weather Research Center

    NASA Astrophysics Data System (ADS)

    Mullinix, R.; Maddox, M. M.; Berrios, D.; Kuznetsova, M.; Pulkkinen, A.; Rastaetter, L.; Zheng, Y.

    2012-12-01

    Space weather affects virtually all of NASA's endeavors, from robotic missions to human exploration. Knowledge and prediction of space weather conditions are therefore essential to NASA operations. The diverse nature of currently available space environment measurements and modeling products compels the need for a single access point to such information. The Integrated Space Weather Analysis (iSWA) System provides this single point access along with the capability to collect and catalog a vast range of sources including both observational and model data. NASA Goddard Space Weather Research Center heavily utilizes the iSWA System daily for research, space weather model validation, and forecasting for NASA missions. iSWA provides the capabilities to view and analyze near real-time space weather data from any where in the world. This presentation will describe the technology behind the iSWA system and describe how to use the system for space weather research, forecasting, training, education, and sharing.

  17. Repeated measurements of mite and pet allergen levels in house dust over a time period of 8 years.

    PubMed

    Antens, C J M; Oldenwening, M; Wolse, A; Gehring, U; Smit, H A; Aalberse, R C; Kerkhof, M; Gerritsen, J; de Jongste, J C; Brunekreef, B

    2006-12-01

    Studies of the association between indoor allergen exposure and the development of allergic diseases have often measured allergen exposure at one point in time. We investigated the variability of house dust mite (Der p 1, Der f 1) and cat (Fel d 1) allergen in Dutch homes over a period of 8 years. Data were obtained in the Dutch PIAMA birth cohort study. Dust from the child's mattress, the parents' mattress and the living room floor was collected at four points in time, when the child was 3 months, 4, 6 and 8 years old. Dust samples were analysed for Der p 1, Der f 1 and Fel d 1 by sandwich enzyme immuno assay. Mite allergen concentrations for the child's mattress, the parents' mattress and the living room floor were moderately correlated between time-points. Agreement was better for cat allergen. For Der p 1 and Der f 1 on the child's mattress, the within-home variance was close to or smaller than the between-home variance in most cases. For Fel d 1, the within-home variance was almost always smaller than the between-home variance. Results were similar for allergen levels expressed per gram of dust and allergen levels expressed per square metre of the sampled surface. Variance ratios were smaller when samples were taken at shorter time intervals than at longer time intervals. Over a period of 4 years, mite and cat allergens measured in house dust are sufficiently stable to use single measurements with confidence in epidemiological studies. The within-home variance was larger when samples were taken 8 years apart so that over such long periods, repetition of sampling is recommended.

  18. Sequential structural damage diagnosis algorithm using a change point detection method

    NASA Astrophysics Data System (ADS)

    Noh, H.; Rajagopal, R.; Kiremidjian, A. S.

    2013-11-01

    This paper introduces a damage diagnosis algorithm for civil structures that uses a sequential change point detection method. The general change point detection method uses the known pre- and post-damage feature distributions to perform a sequential hypothesis test. In practice, however, the post-damage distribution is unlikely to be known a priori, unless we are looking for a known specific type of damage. Therefore, we introduce an additional algorithm that estimates and updates this distribution as data are collected using the maximum likelihood and the Bayesian methods. We also applied an approximate method to reduce the computation load and memory requirement associated with the estimation. The algorithm is validated using a set of experimental data collected from a four-story steel special moment-resisting frame and multiple sets of simulated data. Various features of different dimensions have been explored, and the algorithm was able to identify damage, particularly when it uses multidimensional damage sensitive features and lower false alarm rates, with a known post-damage feature distribution. For unknown feature distribution cases, the post-damage distribution was consistently estimated and the detection delays were only a few time steps longer than the delays from the general method that assumes we know the post-damage feature distribution. We confirmed that the Bayesian method is particularly efficient in declaring damage with minimal memory requirement, but the maximum likelihood method provides an insightful heuristic approach.

  19. Supernova neutrinos and antineutrinos: ternary luminosity diagram and spectral split patterns

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fogli, Gianluigi; Marrone, Antonio; Tamborra, Irene

    2009-10-01

    In core-collapse supernovae, the ν{sub e} and ν-bar {sub e} species may experience collective flavor swaps to non-electron species ν{sub x}, within energy intervals limited by relatively sharp boundaries (''splits''). These phenomena appear to depend sensitively upon the initial energy spectra and luminosities. We investigate the effect of generic variations of the fractional luminosities (l{sub e}, l{sub ē}, l{sub x}) with respect to the usual ''energy equipartition'' case (1/6, 1/6, 1/6), within an early-time supernova scenario with fixed thermal spectra and total luminosity. We represent the constraint l{sub e}+l{sub ē}+4l{sub x} = 1 in a ternary diagram, which is exploredmore » via numerical experiments (in single-angle approximation) over an evenly-spaced grid of points. In inverted hierarchy, single splits arise in most cases, but an abrupt transition to double splits is observed for a few points surrounding the equipartition one. In normal hierarchy, collective effects turn out to be unobservable at all grid points but one, where single splits occur. Admissible deviations from equipartition may thus induce dramatic changes in the shape of supernova (anti)neutrino spectra. The observed patterns are interpreted in terms of initial flavor polarization vectors (defining boundaries for the single/double split transitions), lepton number conservation, and minimization of potential energy.« less

  20. Beyond the Randomized Controlled Trial: A Review of Alternatives in mHealth Clinical Trial Methods

    PubMed Central

    Wiljer, David; Cafazzo, Joseph A

    2016-01-01

    Background Randomized controlled trials (RCTs) have long been considered the primary research study design capable of eliciting causal relationships between health interventions and consequent outcomes. However, with a prolonged duration from recruitment to publication, high-cost trial implementation, and a rigid trial protocol, RCTs are perceived as an impractical evaluation methodology for most mHealth apps. Objective Given the recent development of alternative evaluation methodologies and tools to automate mHealth research, we sought to determine the breadth of these methods and the extent that they were being used in clinical trials. Methods We conducted a review of the ClinicalTrials.gov registry to identify and examine current clinical trials involving mHealth apps and retrieved relevant trials registered between November 2014 and November 2015. Results Of the 137 trials identified, 71 were found to meet inclusion criteria. The majority used a randomized controlled trial design (80%, 57/71). Study designs included 36 two-group pretest-posttest control group comparisons (51%, 36/71), 16 posttest-only control group comparisons (23%, 16/71), 7 one-group pretest-posttest designs (10%, 7/71), 2 one-shot case study designs (3%, 2/71), and 2 static-group comparisons (3%, 2/71). A total of 17 trials included a qualitative component to their methodology (24%, 17/71). Complete trial data collection required 20 months on average to complete (mean 21, SD 12). For trials with a total duration of 2 years or more (31%, 22/71), the average time from recruitment to complete data collection (mean 35 months, SD 10) was 2 years longer than the average time required to collect primary data (mean 11, SD 8). Trials had a moderate sample size of 112 participants. Two trials were conducted online (3%, 2/71) and 7 trials collected data continuously (10%, 7/68). Onsite study implementation was heavily favored (97%, 69/71). Trials with four data collection points had a longer study duration than trials with two data collection points: F4,56=3.2, P=.021, η2=0.18. Single-blinded trials had a longer data collection period compared to open trials: F2,58=3.8, P=.028, η2=0.12. Academic sponsorship was the most common form of trial funding (73%, 52/71). Trials with academic sponsorship had a longer study duration compared to industry sponsorship: F2,61=3.7, P=.030, η2=0.11. Combined, data collection frequency, study masking, sample size, and study sponsorship accounted for 32.6% of the variance in study duration: F4,55=6.6, P<.01, adjusted r2=.33. Only 7 trials had been completed at the time this retrospective review was conducted (10%, 7/71). Conclusions mHealth evaluation methodology has not deviated from common methods, despite the need for more relevant and timely evaluations. There is a need for clinical evaluation to keep pace with the level of innovation of mHealth if it is to have meaningful impact in informing payers, providers, policy makers, and patients. PMID:27613084

  1. Beyond the Randomized Controlled Trial: A Review of Alternatives in mHealth Clinical Trial Methods.

    PubMed

    Pham, Quynh; Wiljer, David; Cafazzo, Joseph A

    2016-09-09

    Randomized controlled trials (RCTs) have long been considered the primary research study design capable of eliciting causal relationships between health interventions and consequent outcomes. However, with a prolonged duration from recruitment to publication, high-cost trial implementation, and a rigid trial protocol, RCTs are perceived as an impractical evaluation methodology for most mHealth apps. Given the recent development of alternative evaluation methodologies and tools to automate mHealth research, we sought to determine the breadth of these methods and the extent that they were being used in clinical trials. We conducted a review of the ClinicalTrials.gov registry to identify and examine current clinical trials involving mHealth apps and retrieved relevant trials registered between November 2014 and November 2015. Of the 137 trials identified, 71 were found to meet inclusion criteria. The majority used a randomized controlled trial design (80%, 57/71). Study designs included 36 two-group pretest-posttest control group comparisons (51%, 36/71), 16 posttest-only control group comparisons (23%, 16/71), 7 one-group pretest-posttest designs (10%, 7/71), 2 one-shot case study designs (3%, 2/71), and 2 static-group comparisons (3%, 2/71). A total of 17 trials included a qualitative component to their methodology (24%, 17/71). Complete trial data collection required 20 months on average to complete (mean 21, SD 12). For trials with a total duration of 2 years or more (31%, 22/71), the average time from recruitment to complete data collection (mean 35 months, SD 10) was 2 years longer than the average time required to collect primary data (mean 11, SD 8). Trials had a moderate sample size of 112 participants. Two trials were conducted online (3%, 2/71) and 7 trials collected data continuously (10%, 7/68). Onsite study implementation was heavily favored (97%, 69/71). Trials with four data collection points had a longer study duration than trials with two data collection points: F4,56=3.2, P=.021, η(2)=0.18. Single-blinded trials had a longer data collection period compared to open trials: F2,58=3.8, P=.028, η(2)=0.12. Academic sponsorship was the most common form of trial funding (73%, 52/71). Trials with academic sponsorship had a longer study duration compared to industry sponsorship: F2,61=3.7, P=.030, η(2)=0.11. Combined, data collection frequency, study masking, sample size, and study sponsorship accounted for 32.6% of the variance in study duration: F4,55=6.6, P<.01, adjusted r(2)=.33. Only 7 trials had been completed at the time this retrospective review was conducted (10%, 7/71). mHealth evaluation methodology has not deviated from common methods, despite the need for more relevant and timely evaluations. There is a need for clinical evaluation to keep pace with the level of innovation of mHealth if it is to have meaningful impact in informing payers, providers, policy makers, and patients.

  2. Expansion of transient operating data

    NASA Astrophysics Data System (ADS)

    Chipman, Christopher; Avitabile, Peter

    2012-08-01

    Real time operating data is very important to understand actual system response. Unfortunately, the amount of physical data points typically collected is very small and often interpretation of the data is difficult. Expansion techniques have been developed using traditional experimental modal data to augment this limited set of data. This expansion process allows for a much improved description of the real time operating response. This paper presents the results from several different structures to show the robustness of the technique. Comparisons are made to a more complete set of measured data to validate the approach. Both analytical simulations and actual experimental data are used to illustrate the usefulness of the technique.

  3. The Advanced Gamma-ray Imaging System (AGIS): A Nanosecond Time Scale Stereoscopic Array Trigger System.

    NASA Astrophysics Data System (ADS)

    Krennrich, Frank; Buckley, J.; Byrum, K.; Dawson, J.; Drake, G.; Horan, D.; Krawzcynski, H.; Schroedter, M.

    2008-04-01

    Imaging atmospheric Cherenkov telescope arrays (VERITAS, HESS) have shown unprecedented background suppression capabilities for reducing cosmic-ray induced air showers, muons and night sky background fluctuations. Next-generation arrays with on the order of 100 telescopes offer larger collection areas, provide the possibility to see the air shower from more view points on the ground, have the potential to improve the sensitivity and give additional background suppression. Here we discuss the design of a fast array trigger system that has the potential to perform a real time image analysis allowing substantially improved background rate suppression at the trigger level.

  4. Investigations of quantum pendulum dynamics in a spin-1 BEC

    NASA Astrophysics Data System (ADS)

    Hoang, Thai; Gerving, Corey; Land, Ben; Anquez, Martin; Hamley, Chris; Chapman, Michael

    2013-05-01

    We investigate the quantum spin dynamics of a spin-1 BEC initialized to an unstable critical point of the dynamical phase space. The subsequent evolution of the collective states of the system is analogous to an inverted simple pendulum in the quantum limit and yields non-classical states with quantum correlations. For short evolution times in the low depletion limit, we observe squeezed states and for longer times beyond the low depletion limit we observe highly non-Gaussian distributions. C.D. Hamley, C.S. Gerving, T.M. Hoang, E.M. Bookjans, and M.S. Chapman, ``Spin-Nematic Squeezed Vacuum in a Quantum Gas,'' Nature Physics 8, 305-308 (2012).

  5. Tissue underlying the intestinal epithelium elicits proliferation of intestinal stem cells following cytotoxic damage

    PubMed Central

    Seiler, Kristen M; Schenhals, Erica L; von Furstenberg, Richard J; Allena, Bhavya K; Smith, Brian J; Scaria, Denny; Bresler, Michele N; Dekaney, Christopher M; Henning, Susan J

    2015-01-01

    The goals of this study were to document the proliferative response of intestinal stem cells (ISCs) during regeneration after damage from doxorubicin (DXR) and to characterize the signals responsible for ISC activation. To this end, jejuni from DXR-treated mice were harvested for histology, assessment of ISC numbers and proliferation by flow cytometry, crypt culture, and RNA analyses. Histology showed that crypt depth and width were increased 4 days after DXR. At this time point, flow cytometry on tissue collected 1 hour after EdU administration revealed increased numbers of CD24loUEA− ISCs and increased percentage of ISCs cycling. In culture, crypts harvested from DXR-treated mice were equally proliferative as those of control mice. Addition of subepithelial intestinal tissue (SET) collected 4 days after DXR elicited increased budding (1.4 ± 0.3 vs. 5.1 ± 1.0 buds per enteroid). Microarray analysis of SET collected 4 days after DXR revealed 1,030 differentially expressed transcripts. Cross comparison of Gene Ontology terms considered relevant to ISC activation pointed to 10 candidate genes. Of these the epidermal growth factor (EGF) family member amphiregulin and the BMP antagonist chordin-like 2 were chosen for further study. In crypt culture, amphiregulin alone did not elicit significant budding, but amphiregulin in combination with BMP antagonism showed marked synergism (yielding 6.3 ± 0.5 buds per enteroid). These data suggest a critical role for underlying tissue in regulating ISC behavior after damage, and point to synergism between amphiregulin and chordin-like 2 as factors which may account for activation of ISCs in the regenerative phase. PMID:25693894

  6. Detection of Treponema Denticola in Symptomatic Apical Periodontitis and in Symptomatic Apical Abscesses by Real-Time PCR

    PubMed Central

    Ozbek, Selcuk M.; Ozbek, Ahmet; Erdogan, Aziz S.

    2009-01-01

    Objectives: The aim of this study was to investigate the presence of Treponema denticola in symptomatic apical periodontitis and in symptomatic apical abscesses by real-time polymerase chain reaction (PCR) method. Methods: Microbial samples were collected from 60 single-rooted teeth having carious lesions and necrotic pulps. For each tooth, clinical data including patient symptoms were recorded. Teeth were categorized by diagnosis as having symptomatic apical periodontitis or symptomatic apical abscess. Aseptic microbial samples were collected using paper points from 30 infected root canals and from aspirates of 30 abscesses. DNA was extracted from the samples by using a QIAamp® DNA mini-kit and analyzed with real-time PCR. Results: T. denticola was detected in 24 of 30 cases diagnosed as symptomatic apical abscesses (80%), and 19 of 30 cases diagnosed as symptomatic apical periodontitis (63.3%). In general T. denticola was found in 43 of 60 cases (71.6%). Conclusions: Our findings suggest that T. denticola can participate in the pathogenesis of symptomatic apical abscesses. PMID:19421390

  7. Time Series Expression Analyses Using RNA-seq: A Statistical Approach

    PubMed Central

    Oh, Sunghee; Song, Seongho; Grabowski, Gregory; Zhao, Hongyu; Noonan, James P.

    2013-01-01

    RNA-seq is becoming the de facto standard approach for transcriptome analysis with ever-reducing cost. It has considerable advantages over conventional technologies (microarrays) because it allows for direct identification and quantification of transcripts. Many time series RNA-seq datasets have been collected to study the dynamic regulations of transcripts. However, statistically rigorous and computationally efficient methods are needed to explore the time-dependent changes of gene expression in biological systems. These methods should explicitly account for the dependencies of expression patterns across time points. Here, we discuss several methods that can be applied to model timecourse RNA-seq data, including statistical evolutionary trajectory index (SETI), autoregressive time-lagged regression (AR(1)), and hidden Markov model (HMM) approaches. We use three real datasets and simulation studies to demonstrate the utility of these dynamic methods in temporal analysis. PMID:23586021

  8. Time series expression analyses using RNA-seq: a statistical approach.

    PubMed

    Oh, Sunghee; Song, Seongho; Grabowski, Gregory; Zhao, Hongyu; Noonan, James P

    2013-01-01

    RNA-seq is becoming the de facto standard approach for transcriptome analysis with ever-reducing cost. It has considerable advantages over conventional technologies (microarrays) because it allows for direct identification and quantification of transcripts. Many time series RNA-seq datasets have been collected to study the dynamic regulations of transcripts. However, statistically rigorous and computationally efficient methods are needed to explore the time-dependent changes of gene expression in biological systems. These methods should explicitly account for the dependencies of expression patterns across time points. Here, we discuss several methods that can be applied to model timecourse RNA-seq data, including statistical evolutionary trajectory index (SETI), autoregressive time-lagged regression (AR(1)), and hidden Markov model (HMM) approaches. We use three real datasets and simulation studies to demonstrate the utility of these dynamic methods in temporal analysis.

  9. Who owns the recyclables

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Parker, B.

    On March 31, the California Supreme Court decided the much awaited Rancho Mirage'' case (Waste Management of the Desert, Inc., and the City of Rancho Mirage v. Palm Springs Recycling Center, Inc.), and held that the California Integrated Waste Management Act of 1989 does not allow an exclusive franchise for the collection of recyclables not discarded by their owner.'' This ends a three-year slugfest between secondary materials processors in the state and municipalities and their franchised garbage haulers who also collect and process recyclables as part of their exclusive arrangement. Central to this nationally-watched litigation is a most fundamental questionmore » in waste management: at what point in time do articles in the solid waste stream become actual or potentially valuable secondary materials« less

  10. The application of capillary microsampling in GLP toxicology studies.

    PubMed

    Verhaeghe, Tom; Dillen, Lieve; Stieltjes, Hans; Zwart, Loeckie de; Feyen, Bianca; Diels, Luc; Vroman, Ann; Timmerman, Philip

    2017-04-01

    Capillary microsampling (CMS) to collect microplasma volumes is gradually replacing traditional, larger volume sampling from rats in GLP toxicology studies. About 32 µl of blood is collected with a capillary, processed to plasma and stored in a 10- or 4-µl capillary which is washed out further downstream in the laboratory. CMS has been standardized with respect to materials, assay validation experiments and application for sample analysis. The implementation of CMS has resulted in blood volume reductions in the rat from 300 to 32 µl per time point and the elimination of toxicokinetic satellite groups in the majority of the rat GLP toxicology studies. The technique has been successfully applied in 26 GLP studies for 12 different projects thus far.

  11. Data extraction for complex meta-analysis (DECiMAL) guide.

    PubMed

    Pedder, Hugo; Sarri, Grammati; Keeney, Edna; Nunes, Vanessa; Dias, Sofia

    2016-12-13

    As more complex meta-analytical techniques such as network and multivariate meta-analyses become increasingly common, further pressures are placed on reviewers to extract data in a systematic and consistent manner. Failing to do this appropriately wastes time, resources and jeopardises accuracy. This guide (data extraction for complex meta-analysis (DECiMAL)) suggests a number of points to consider when collecting data, primarily aimed at systematic reviewers preparing data for meta-analysis. Network meta-analysis (NMA), multiple outcomes analysis and analysis combining different types of data are considered in a manner that can be useful across a range of data collection programmes. The guide has been shown to be both easy to learn and useful in a small pilot study.

  12. Violation of Bans on Tobacco Advertising and Promotion at Points of Sale in Viet Nam: Trend from 2009 - 2015.

    PubMed

    Huong, Le Thi Thanh; Long, Tran Khanh; Son, Phung Xuan; Huyen, Do Phuc; Linh, Phan Thuy; Bich, Nguyen Ngoc; Lam, Nguyen Xuan; Anh, Le Vu; Tuyet-Hanh, Tran Thi

    2016-01-01

    Comprehensive bans on tobacco advertising and promotion were introduced through tobacco control legislation in Viet Nam, but it has been established that violations of the bans are very common. This study was conducted to explore the trend in violations of bans on tobacco advertising and promotion at points of sale in Viet Nam in the past six years and to explore any differences in the violation situations before and after the Law on Tobacco Control came into effect on 1st May 2013. Quantitative data were collected through observation of violations of the bans on tobacco advertising and promotion at points of sale in 10 provinces throughout Viet Nam in four survey rounds (2009, 2010, 2011, and 2015). Variation in violation prevalence over time was examined by chi-square test using a Bonferini method. Binary logistic regression was employed to identify the factors that may have influences on different types of violation. A level of significance of p<0.05 was used for all tests in this article. The most common form of violation was the display of more than one pack/one carton of a cigarette brand. Violation of bans on tobacco advertising increased while violations on promotion ban and on displaying tobacco decreased through time. Some factors associated with the tobacco advertising and promotion bans included surveyed years, types of points of sale, regions and areas where the points of sale were located. The enforcement of the bans did not improve even after the issuance and the enactment of the Law on Tobacco Control. This suggests that the monitoring and enforcement of bans on tobacco advertising and promotion at points of sale should be strengthened. Penalties should be strictly applied for violators as indicated in the current tobacco control legislation.

  13. 78 FR 38039 - Agency Information Collection Activities; Proposed Collection; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-25

    ... its estimates for the enforcement authority exclusive to it regarding the class of motor vehicle... on the same page, but in no event smaller than 12-point type, or if provided by electronic means... same page, but in no event smaller than 8-point type. The long notice shall begin with a heading in...

  14. Designing and Developing Web-Based Administrative Tools for Program Management

    NASA Technical Reports Server (NTRS)

    Gutensohn, Michael

    2017-01-01

    The task assigned for this internship was to develop a new tool for tracking projects, their subsystems, the leads, backups, and other employees assigned to them, as well as all the relevant information related to the employee (WBS (time charge) codes, time distribution, certifications, and assignments). Currently, this data is tracked manually using a number of different spreadsheets and other tools simultaneously by a number of different people; some of these documents are then merged into one large document. This often leads to inconsistencies and loss in data due to human error. By simplifying the process of tracking this data and aggregating it into a single tool, it is possible to significantly decrease the potential for human error and time spent collecting and checking this information. II. Objective The main objective of this internship is to develop a web-based tool using Ruby on Rails to serve as a method of easily tracking projects, subsystems, and points of contact, along with employees, their assignments, time distribution, certifications, and contact information. Additionally, this tool must be capable of generating a number of different reports based on the data collected. It was important that this tool deliver all of this information using a readable and intuitive interface.

  15. Cytokine expression in response to root canal infection in gnotobiotic mice.

    PubMed

    Maciel, K F; Neves de Brito, L C; Tavares, W L F; Moreira, G; Nicoli, J R; Vieira, L Q; Ribeiro Sobrinho, A P

    2012-04-01

    To examine cytokine expression profiles during periapical lesion development in response to synergetic human pathogens in a gnotobiotic mouse model. Human strains of Fusobacterium nucleatum and Peptostreptococcus prevotii were inoculated into the root canals of germ-free mice in either mono- or bi-association. Animals were killed 7 and 14 days after infection, and periapical tissues were collected. mRNA expression of the cytokines IFN-γ, TNF-α, Receptor activator of nuclear factor kappa-B ligand (RANKL), IL-10, IL-4 and transforming growth factor β (TGF-β) was assessed using real-time PCR. Levene's test was used to assess the equality of variance of the data, whereas a t-test for independent samples was used to evaluate the significance of the differences between groups (P < 0.05). The mRNA expression of IFN-γ and TNF-α was up-regulated by F. nucleatum during the acute (day 7) and chronic phase (day 14) of periapical lesion development. However, in bi-infection the expression of IFN-γ and TNF-α were effectively absent at both time-points. RANKL mRNA expression was down-regulated during dual infection at the chronic phase. As IL-4 expression was similar at both time-points, IL-4 does not appear to be involved in the periapical response to these bacterial strains. IL-10 was up-regulated during the chronic phase by mono-infection with either F. nucleatum or P. prevotii. Dual infection increased TGF-β mRNA expression on day 7, which paralleled the decrease in IFN-γ and TNF-α mRNA levels at the same time-point. F. nucleatum increased TGF-β mRNA expression during the chronic phase. Cytokine profiles depend on the nature of the bacterial challenge. Both TGF-β and IL-10 appeared to be regulating the proinflammatory cytokine responses at both time-points of the periapical immune response. © 2012 International Endodontic Journal.

  16. Quality of life after hip, vertebral, and distal forearm fragility fractures measured using the EQ-5D-3L, EQ-VAS, and time-trade-off: results from the ICUROS.

    PubMed

    Svedbom, Axel; Borgström, Fredrik; Hernlund, Emma; Ström, Oskar; Alekna, Vidmantas; Bianchi, Maria Luisa; Clark, Patricia; Curiel, Manuel Díaz; Dimai, Hans Peter; Jürisson, Mikk; Uusküla, Anneli; Lember, Margus; Kallikorm, Riina; Lesnyak, Olga; McCloskey, Eugene; Ershova, Olga; Sanders, Kerrie M; Silverman, Stuart; Tamulaitiene, Marija; Thomas, Thierry; Tosteson, Anna N A; Jönsson, Bengt; Kanis, John A

    2018-03-01

    The International Costs and Utilities Related to Osteoporotic fractures Study is a multinational observational study set up to describe the costs and quality of life (QoL) consequences of fragility fracture. This paper aims to estimate and compare QoL after hip, vertebral, and distal forearm fracture using time-trade-off (TTO), the EuroQol (EQ) Visual Analogue Scale (EQ-VAS), and the EQ-5D-3L valued using the hypothetical UK value set. Data were collected at four time-points for five QoL point estimates: within 2 weeks after fracture (including pre-fracture recall), and at 4, 12, and 18 months after fracture. Health state utility values (HSUVs) were derived for each fracture type and time-point using the three approaches (TTO, EQ-VAS, EQ-5D-3L). HSUV were used to estimate accumulated QoL loss and QoL multipliers. In total, 1410 patients (505 with hip, 316 with vertebral, and 589 with distal forearm fracture) were eligible for analysis. Across all time-points for the three fracture types, TTO provided the highest HSUVs, whereas EQ-5D-3L consistently provided the lowest HSUVs directly after fracture. Except for 13-18 months after distal forearm fracture, EQ-5D-3L generated lower QoL multipliers than the other two methods, whereas no equally clear pattern was observed between EQ-VAS and TTO. On average, the most marked differences between the three approaches were observed immediately after the fracture. The approach to derive QoL markedly influences the estimated QoL impact of fracture. Therefore the choice of approach may be important for the outcome and interpretation of cost-effectiveness analysis of fracture prevention.

  17. Factors Associated with Cognition in Adults: The Seattle Longitudinal Study

    PubMed Central

    Yu, Fang; Ryan, Lindsay H.; Schaie, K. Warner; Willis, Sherry L.; Kolanowski, Ann

    2010-01-01

    A better understanding of factors that affect cognition could lead to improved health and greater independence for older adults. We examined the association of four modifiable factors (leisure-time physical activity, leisure-time cognitive activity, self-directed work, and hypertension) with changes in two aspects of fluid intelligence (verbal memory and inductive reasoning). Data for 626 adults collected over 14 years (three time points) were analyzed by multi-level modeling. A component of self-directed work, higher work control, was associated with better verbal memory (p < .05) and inductive reasoning (p < .01). There were no significant interactions among these factors. The findings suggest that a strong sense of control at work may be protective for fluid intelligence in adults. PMID:19606423

  18. The Moderating Effect of Interaction Avoidance Between Abusive Supervision and Subordinates' Job Promotions.

    PubMed

    Peltokorpi, Vesa

    2017-10-03

    While abusive supervision is shown to have negative stress-related effects on targets, less is known about the factors capable of mitigating these negative effects and their career-related outcomes. In this paper, we drew on the transactional model of stress and coping (Lazarus & Folkman, 1986) and the upward mobility theory (Turner, 1960) to explore the moderating effect of subordinates' interaction avoidance between abusive supervision and job promotions. To test this moderating effect, we collected data from 604 full-time employees at three points in time over a 12-month time period in Japan. The findings suggest that interaction avoidance moderates the relationship between abusive supervision and promotions, such that this relationship will be less negative as interaction avoidance increases.

  19. The relational underpinnings of quality internal auditing in medical clinics in Israel.

    PubMed

    Carmeli, Abraham; Zisu, Malka

    2009-03-01

    Internal auditing is a key mechanism in enhancing organizational reliability. However, research on the ways quality internal auditing is enabled through learning, deterrence, motivation and process improvement is scant. In particular, the relational underpinnings of internal auditing have been understudied. This study attempts to address this need by examining how organizational trust, perceived organizational support and psychological safety enable internal auditing. Data collected from employees in medical clinics of one of the largest healthcare organizations in Israel at two points in time six months apart. Our results show that organizational trust and perceived organizational support are positively related to psychological safety (measured at time 1), which, in turn, is associated with internal auditing (measured at time 2).

  20. Landsat change detection can aid in water quality monitoring

    NASA Technical Reports Server (NTRS)

    Macdonald, H. C.; Steele, K. F.; Waite, W. P.; Shinn, M. R.

    1977-01-01

    Comparison between Landsat-1 and -2 imagery of Arkansas provided evidence of significant land use changes during the 1972-75 time period. Analysis of Arkansas historical water quality information has shown conclusively that whereas point source pollution generally can be detected by use of water quality data collected by state and federal agencies, sampling methodologies for nonpoint source contamination attributable to surface runoff are totally inadequate. The expensive undertaking of monitoring all nonpoint sources for numerous watersheds can be lessened by implementing Landsat change detection analyses.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top