CFD RANS Simulations on a Generic Conventional Scale Model Submarine: Comparison between Fluent and OpenFOAM

DTIC Science & Technology

2015-09-01

lift and drag forces on two model car geometries (designated as the VRAK model and the S80 model). For the VRAK model the OpenFOAM drag coefficient was...lift coefficient was 16.5% higher than the Fluent value. Both model car geometries were meshed using Harpoon, which is a commercial software package...2. Clarke, G., Vun, S., Giacobello, M. and Reddy, R., “Estimation of ARH Tiger Fuselage Aerodynamic Characteristics Using Computational Fluid

Emotional reactivity and regulation associated with fluent and stuttered utterances of preschool-age children who stutter

PubMed Central

Jones, Robin M.; Conture, Edward G.; Walden, Tedra A.

2014-01-01

Purpose The purpose of this study was to assess the relation between emotional reactivity and regulation associated with fluent and stuttered utterances of preschool-age children who stutter (CWS) and those who do not (CWNS). Participants Participants were eight 3 to 6-year old CWS and eight CWNS of comparable age and gender. Methods Participants were exposed to three emotion-inducing overheard conversations—neutral, angry and happy—and produced a narrative following each overheard conversation. From audio-video recordings of these narratives, coded behavioral analysis of participants’ negative and positive affect and emotion regulation associated with stuttered and fluent utterances was conducted. Results Results indicated that CWS were significantly more likely to exhibit emotion regulation attempts prior to and during their fluent utterances following the happy as compared to the negative condition, whereas CWNS displayed the opposite pattern. Within-group assessment indicated that CWS were significantly more likely to display negative emotion prior to and during their stuttered than fluent utterances, particularly following the positive overheard conversation. Conclusions After exposure to emotional-inducing overheard conversations, changes in preschool-age CWS’s emotion and emotion regulatory attempts were associated with the fluency of their utterances. PMID:24630144

Modeling of milk flow in mammary ducts in lactating human female breast.

PubMed

Mortazavi, S Negin; Geddes, Donna; Hassanipour, Fatemeh

2014-01-01

A transient laminar Newtonian three-dimensional CFD simulation has been studied for milk flow in a phantom model of the 6-generations human lactating breast branching system. Milk is extracted by the cyclic pattern of suction from the alveoli through the duct and to the nipple. The real negative (suction) pressure data are applied as an outlet boundary condition in nipple. In this study, the commercial CFD code (Fluent Inc., 2004) is employed for the numerical solution of the milk flow. The milk intake flow rate from simulation is compared to the real clinical data from published paper. The results are in good agreement. It is believed that the methodology of the lactating human breast branching modeling proposed here can provide potential guidelines for further clinical and research application.

Numerical simulation of pressure fluctuation in 1000MW Francis turbine under small opening condition

NASA Astrophysics Data System (ADS)

Gong, R. Z.; Wang, H. G.; Yao, Y.; Shu, L. F.; Huang, Y. J.

2012-11-01

In order to study the cause of abnormal vibration in large Francis turbine under small opening condition, CFD method was adopted to analyze the flow filed and pressure fluctuation. Numerical simulation was performed on the commercial CFD code Ansys FLUENT 12, using DES method. After an effective validation of the computation result, the flow behaviour of internal flow field under small opening condition is analyzed. Pressure fluctuation in different working mode is obtained by unsteady CFD simulation, and results is compared to study its change. Radial force fluctuation is also analyzed. The result shows that the unstable flow under small opening condition leads to an increase of turbine instability in reverse pump mode, and is one possible reason of the abnormal oscillation.

Analysis and Design of Crew Sleep Station for ISS

NASA Technical Reports Server (NTRS)

Keener, John F.; Paul, Thomas; Eckhardt, Bradley; Smith, Fredrick

2002-01-01

This paper details the analysis and design of the Temporary Sleep Station (TeSS) environmental control system for International Space Station (ISS). The TeSS will provide crewmembers with a private and personal space, to accommodate sleeping, donning and doffing of clothing, personal communication and performance of recreational activities. The need for privacy to accommodate these activities requires adequate ventilation inside the TeSS. This study considers whether temperature, carbon dioxide, and humidity within the TeSS remain within crew comfort and safety levels for various expected operating scenarios. Evaluation of these scenarios required the use and integration of various simulation codes. An approach was adapted for this study, whereby results from a particular code were integrated with other codes when necessary. Computational Fluid Dynamics (CFD) methods were used to evaluate the flow field inside the TeSS, from which local gradients for temperature, velocity, and species concentration such as CO (sub 2) could be determined. A model of the TeSS, containing a human, as well as equipment such as a laptop computer, was developed in FLUENT, a finite-volume code. Other factors, such as detailed analysis of the heat transfer through the structure, radiation, and air circulation from the TeSS to the US Laboratory Aisle, where the TeSS is housed, were considered in the model. A complementary model was developed in G189A, a code which has been used by NASA/JSC for environmental control systems analyses since the Apollo program. Boundary conditions were exchanged between the FLUENT and G189A TeSS models. G189A provides human respiration rates to the FLUENT model, while the FLUENT model provides local convective heat transfer coefficients to G189A model. An additional benefit from using an approach with both a systems simulation and CFD model, is the capability to verify the results of each model by comparison to the results of the other model. The G189A and FLUENT models were used to evaluate various ventilation designs for the TeSS over a range of operating conditions with varying crew metabolic load, equipment operating modes, ventilation flow rates, and with the TeSS doors open and closed. Results from the study were instrumental in the optimization of a design for the TeSS ventilation hardware. A special case was considered where failure of the TeSS ventilation system occurred. In this case, a study was conducted in order to determine the time required for the CO (sub 2) concentration inside the TeSS to increase to ISS limit values under transient conditions. A lumped-capacitance code, SINDA-FLUINT was used in this case to provide accurate predictions of the human reaction to the TeSS cabin conditions including core and skin temperatures and body heat storage. A simple two-dimensional CFD model of a crewmember inside the TeSS was developed in FLUENT in order to determine the volume envelope of the respired air from the human, which maintained a minimum velocity profile. This volume was then used in the SINDA-FLUINT model to facilitate the calculations of CO (sub 2) concentrations, dry bulb temperatures and humidity levels inside the TeSS.

A CFD Study on the Prediction of Cyclone Collection Efficiency

NASA Astrophysics Data System (ADS)

Gimbun, Jolius; Chuah, T. G.; Choong, Thomas S. Y.; Fakhru'L-Razi, A.

2005-09-01

This work presents a Computational Fluid Dynamics calculation to predict and to evaluate the effects of temperature, operating pressure and inlet velocity on the collection efficiency of gas cyclones. The numerical solutions were carried out using spreadsheet and commercial CFD code FLUENT 6.0. This paper also reviews four empirical models for the prediction of cyclone collection efficiency, namely Lapple [1], Koch and Licht [2], Li and Wang [3], and Iozia and Leith [4]. All the predictions proved to be satisfactory when compared with the presented experimental data. The CFD simulations predict the cyclone cut-off size for all operating conditions with a deviation of 3.7% from the experimental data. Specifically, results obtained from the computer modelling exercise have demonstrated that CFD model is the best method of modelling the cyclones collection efficiency.

Numerical analysis of single and multiple jets

NASA Astrophysics Data System (ADS)

Boussoufi, Mustapha; Sabeur-Bendehina, Amina; Ouadha, Ahmed; Morsli, Souad; El Ganaoui, Mohammed

2017-05-01

The present study aims to use the concept of entropy generation in order to study numerically the flow and the interaction of multiple jets. Several configurations of a single jet surrounded by equidistant 3, 5, 7 and 9 circumferential jets have been studied. The turbulent incompressible Navier-Stokes equations have been solved numerically using the commercial computational fluid dynamics code Fluent. The standard k-ɛ model has been selected to assess the eddy viscosity. The domain has been reduced to a quarter of the geometry due to symmetry. Results for axial and radial velocities have been compared with experimental measurements from the literature. Furthermore, additional results involving entropy generation rate have been presented and discussed. Contribution to the topical issue "Materials for Energy harvesting, conversion and storage II (ICOME 2016)", edited by Jean-Michel Nunzi, Rachid Bennacer and Mohammed El Ganaoui

Numerical and experimental investigation of turbine blade film cooling

NASA Astrophysics Data System (ADS)

Berkache, Amar; Dizene, Rabah

2017-12-01

The blades in a gas turbine engine are exposed to extreme temperature levels that exceed the melting temperature of the material. Therefore, efficient cooling is a requirement for high performance of the gas turbine engine. The present study investigates film cooling by means of 3D numerical simulations using a commercial code: Fluent. Three numerical models, namely k-ɛ, RSM and SST turbulence models; are applied and then prediction results are compared to experimental measurements conducted by PIV technique. The experimental model realized in the ENSEMA laboratory uses a flat plate with several rows of staggered holes. The performance of the injected flow into the mainstream is analyzed. The comparison shows that the RANS closure models improve the over-predictions of center-line film cooling velocities that is caused by the limitations of the RANS method due to its isotropy eddy diffusivity.

Computational analysis of water entry of a circular section at constant velocity based on Reynold's averaged Navier-Stokes method

NASA Astrophysics Data System (ADS)

Uddin, M. Maruf; Fuad, Muzaddid-E.-Zaman; Rahaman, Md. Mashiur; Islam, M. Rabiul

2017-12-01

With the rapid decrease in the cost of computational infrastructure with more efficient algorithm for solving non-linear problems, Reynold's averaged Navier-Stokes (RaNS) based Computational Fluid Dynamics (CFD) has been used widely now-a-days. As a preliminary evaluation tool, CFD is used to calculate the hydrodynamic loads on offshore installations, ships, and other structures in the ocean at initial design stages. Traditionally, wedges have been studied more than circular cylinders because cylinder section has zero deadrise angle at the instant of water impact, which increases with increase of submergence. In Present study, RaNS based commercial code ANSYS Fluent is used to simulate the water entry of a circular section at constant velocity. It is seen that present computational results were compared with experiment and other numerical method.

Lattice Boltzmann Model of 3D Multiphase Flow in Artery Bifurcation Aneurysm Problem

PubMed Central

Abas, Aizat; Mokhtar, N. Hafizah; Ishak, M. H. H.; Abdullah, M. Z.; Ho Tian, Ang

2016-01-01

This paper simulates and predicts the laminar flow inside the 3D aneurysm geometry, since the hemodynamic situation in the blood vessels is difficult to determine and visualize using standard imaging techniques, for example, magnetic resonance imaging (MRI). Three different types of Lattice Boltzmann (LB) models are computed, namely, single relaxation time (SRT), multiple relaxation time (MRT), and regularized BGK models. The results obtained using these different versions of the LB-based code will then be validated with ANSYS FLUENT, a commercially available finite volume- (FV-) based CFD solver. The simulated flow profiles that include velocity, pressure, and wall shear stress (WSS) are then compared between the two solvers. The predicted outcomes show that all the LB models are comparable and in good agreement with the FVM solver for complex blood flow simulation. The findings also show minor differences in their WSS profiles. The performance of the parallel implementation for each solver is also included and discussed in this paper. In terms of parallelization, it was shown that LBM-based code performed better in terms of the computation time required. PMID:27239221

Investigation of computational aeroacoustic tools for noise predictions of wind turbine aerofoils

NASA Astrophysics Data System (ADS)

Humpf, A.; Ferrer, E.; Munduate, X.

2007-07-01

In this work trailing edge noise levels of a research aerofoil have been computed and compared to aeroacoustic measurements using two different approaches. On the other hand, aerodynamic and aeroacoustic calculations were performed with the full Navier-Stokes CFD code Fluent [Fluent Inc 2005 Fluent 6.2 Users Guide, Lebanon, NH, USA] on the basis of a steady RANS simulation. Aerodynamic characteristics were computed by the aid of various turbulence models. By the combined usage of implemented broadband noise source models, it was tried to isolate and determine the trailing edge noise level. Throughout this work two methods of different computational cost have been tested and quantitative and qualitative results obtained. On the one hand, the semi-empirical noise prediction tool NAFNoise [Moriarty P 2005 NAFNoise User's Guide. Golden, Colorado, July. http://wind.nrel.gov/designcodes/ simulators/NAFNoise] was used to directly predict trailing edge noise by taking into consideration the nature of the experiments.

On forward inferences of fast and slow readers. An eye movement study

PubMed Central

Hawelka, Stefan; Schuster, Sarah; Gagl, Benjamin; Hutzler, Florian

2015-01-01

Unimpaired readers process words incredibly fast and hence it was assumed that top-down processing, such as predicting upcoming words, would be too slow to play an appreciable role in reading. This runs counter the major postulate of the predictive coding framework that our brain continually predicts probable upcoming sensory events. This means, it may generate predictions about the probable upcoming word during reading (dubbed forward inferences). Trying to asses these contradictory assumptions, we evaluated the effect of the predictability of words in sentences on eye movement control during silent reading. Participants were a group of fluent (i.e., fast) and a group of speed-impaired (i.e., slow) readers. The findings indicate that fast readers generate forward inferences, whereas speed-impaired readers do so to a reduced extent - indicating a significant role of predictive coding for fluent reading. PMID:25678030

Heat transfer simulation in a vertical Bridgman CdTe growth configuration

NASA Astrophysics Data System (ADS)

Martinez-Tomas, C.; Muñoz, V.; Triboulet, R.

1999-02-01

Modelling and numerical simulation of crystal growth processes have been shown to be powerful tools in order to understand the physical effects of different parameters on the growth conditions. In this study a finite difference/control volume technique for the study of heat transfer has been employed. This model takes into account the whole system: furnace temperature profile, air gap between furnace walls and ampoule, ampoule geometry, crucible coating if any, solid and liquid CdTe thermal properties, conduction, convection and radiation of heat and phase change. We have used the commercial code FLUENT for the numerical resolution that can be running on a personal computer. Results show that the temperature field is very sensitive to the charge and ampoule peculiarities. As a consequence, significant differences between the velocity of the ampoule and that of the isotherm determining the solid/liquid interface have been found at the onset of the growth.

Frost Growth CFD Model of an Integrated Active Desiccant Rooftop Unit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geoghegan, Patrick J; Petrov, Andrei Y; Vineyard, Edward Allan

2008-01-01

A frost growth model is incorporated into a Computational Fluid Dynamics (CFD) simulation of a heat pump by means of a user-defined function in FLUENT, a commercial CFD code. The transient model is applied to the outdoor section of an Integrated Active Desiccant Rooftop (IADR) unit in heating mode. IADR is a hybrid vapor compression and active desiccant unit capable of handling 100% outdoor air (dedicated outdoor air system) or as a total conditioning system, handling both outdoor air and space cooling or heating loads. The predicted increase in flow resistance and loss in heat transfer capacity due to frostmore » build-up are compared to experimental pressure drop readings and thermal imaging. The purpose of this work is to develop a CFD model that is capable of predicting frost growth, an invaluable tool in evaluating the effectiveness of defrost-on-demand cycles.« less

Effect of Blockage and Location on Mixing of Swirling Coaxial Jets in a Non-expanding Circular Confinement

NASA Astrophysics Data System (ADS)

Patel, V. K.; Singh, S. N.; Seshadri, V.

2013-06-01

A study is conducted to evolve an effective design concept to improve mixing in a combustor chamber to reduce the amount of intake air. The geometry used is that of a gas turbine combustor model. For simplicity, both the jets have been considered as air jets and effect of heat release and chemical reaction has not been modeled. Various contraction shapes and blockage have been investigated by placing them downstream at different locations with respect to inlet to obtain better mixing. A commercial CFD code `Fluent 6.3' which is based on finite volume method has been used to solve the flow in the combustor model. Validation is done with the experimental data available in literature using standard k-ω turbulence model. The study has shown that contraction and blockage at optimum location enhances the mixing process. Further, the effect of swirl in the jets has also investigated.

Numerical simulation of turbulent forced convection in liquid metals

NASA Astrophysics Data System (ADS)

Vodret, S.; Vitale Di Maio, D.; Caruso, G.

2014-11-01

In the frame of the future generation of nuclear reactors, liquid metals are foreseen to be used as a primary coolant. Liquid metals are characterized by a very low Prandtl number due to their very high heat diffusivity. As such, they do not meet the so-called Reynolds analogy which assumes a complete similarity between the momentum and the thermal boundary layers via the use of the turbulent Prandtl number. Particularly, in the case of industrial fluid-dynamic calculations where a resolved computation near walls could be extremely time consuming and could need very large computational resources, the use of the classical wall function approach could lead to an inaccurate description of the temperature profile close to the wall. The first aim of the present study is to investigate the ability of a well- established commercial code (ANSYS FLUENT v.14) to deal with this issue, validating a suitable expression for the turbulent Prandtl number. Moreover, a thermal wall-function developed at Universite Catholique de Louvain has been implemented in FLUENT and validated, overcoming the limits of the solver to define it directly. Both the resolved and unresolved approaches have been carried out for a channel flow case and assessed against available direct numerical and large eddy simulations. A comparison between the numerically evaluated Nusselt number and the main correlations available in the literature has been also carried out. Finally, an application of the proposed methodology to a typical sub-channel case has been performed, comparing the results with literature correlations for tube banks.

Verification of Advective Bar Elements Implemented in the Aria Thermal Response Code.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mills, Brantley

2016-01-01

A verification effort was undertaken to evaluate the implementation of the new advective bar capability in the Aria thermal response code. Several approaches to the verification process were taken : a mesh refinement study to demonstrate solution convergence in the fluid and the solid, visually examining the mapping of the advective bar element nodes to the surrounding surfaces, and a comparison of solutions produced using the advective bars for simple geometries with solutions from commercial CFD software . The mesh refinement study has shown solution convergence for simple pipe flow in both temperature and velocity . Guidelines were provided tomore » achieve appropriate meshes between the advective bar elements and the surrounding volume. Simulations of pipe flow using advective bars elements in Aria have been compared to simulations using the commercial CFD software ANSYS Fluent (r) and provided comparable solutions in temperature and velocity supporting proper implementation of the new capability. Verification of Advective Bar Elements iv Acknowledgements A special thanks goes to Dean Dobranich for his guidance and expertise through all stages of this effort . His advice and feedback was instrumental to its completion. Thanks also goes to Sam Subia and Tolu Okusanya for helping to plan many of the verification activities performed in this document. Thank you to Sam, Justin Lamb and Victor Brunini for their assistance in resolving issues encountered with running the advective bar element model. Finally, thanks goes to Dean, Sam, and Adam Hetzler for reviewing the document and providing very valuable comments.« less

Characterization of Fuego for laminar and turbulent natural convection heat transfer.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Francis, Nicholas Donald, Jr.; .)

2005-08-01

A computational fluid dynamics (CFD) analysis is conducted for internal natural convection heat transfer using the low Mach number code Fuego. The flow conditions under investigation are primarily laminar, transitional, or low-intensity level turbulent flows. In the case of turbulent boundary layers at low-level turbulence or transitional Reynolds numbers, the use of standard wall functions no longer applies, in general, for wall-bounded flows. One must integrate all the way to the wall in order to account for gradients in the dependent variables in the viscous sublayer. Fuego provides two turbulence models in which resolution of the near-wall region is appropriate.more » These models are the v2-f turbulence model and a Launder-Sharma, low-Reynolds number turbulence model. Two standard geometries are considered: the annulus formed between horizontal concentric cylinders and a square enclosure. Each geometry emphasizes wall shear flow and complexities associated with turbulent or near turbulent boundary layers in contact with a motionless core fluid. Overall, the Fuego simulations for both laminar and turbulent flows compared well to measured data, for both geometries under investigation, and to a widely accepted commercial CFD code (FLUENT).« less

Performance Analysis of the ARL Linux Networx Cluster

DTIC Science & Technology

2004-06-01

OVERFLOW, used processors selected by SGE. All benchmarks on the GAMESS, COBALT, LSDYNA and FLUENT. Each code Origin 3800 were executed using IRIX cpusets...scheduler. for these benchmarks defines a missile with grid fins consisting of seventeen million cells [31. 4. Application Performance Results and

Flow and Temperature Distribution Evaluation on Sodium Heated Large-sized Straight Double-wall-tube Steam Generator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kisohara, Naoyuki; Moribe, Takeshi; Sakai, Takaaki

2006-07-01

The sodium heated steam generator (SG) being designed in the feasibility study on commercialized fast reactor cycle systems is a straight double-wall-tube type. The SG is large sized to reduce its manufacturing cost by economics of scale. This paper addresses the temperature and flow multi-dimensional distributions at steady state to obtain the prospect of the SG. Large-sized heat exchanger components are prone to have non-uniform flow and temperature distributions. These phenomena might lead to tube buckling or tube to tube-sheet junction failure in straight tube type SGs, owing to tubes thermal expansion difference. The flow adjustment devices installed in themore » SG are optimized to prevent these issues, and the temperature distribution properties are uncovered by analysis methods. The analysis model of the SG consists of two parts, a sodium inlet distribution plenum (the plenum) and a heat transfer tubes bundle region (the bundle). The flow and temperature distributions in the plenum and the bundle are evaluated by the three-dimensional code 'FLUENT' and the two dimensional thermal-hydraulic code 'MSG', respectively. The MSG code is particularly developed for sodium heated SGs in JAEA. These codes have revealed that the sodium flow is distributed uniformly by the flow adjustment devices, and that the lateral tube temperature distributions remain within the allowable temperature range for the structural integrity of the tubes and the tube to tube-sheet junctions. (authors)« less

Levels of Syntactic Realization in Oral Reading.

ERIC Educational Resources Information Center

Brown, Eric

Two contrasting theories of reading are reviewed in light of recent research in psycholinguistics. A strictly "visual" model of fluent reading is contrasted with several mediational theories where auditory or articulatory coding is deemed necessary for comprehension. Surveying the research in visual information processing, oral reading,…

Spanish-English Speech Perception in Children and Adults: Developmental Trends

ERIC Educational Resources Information Center

Brice, Alejandro E.; Gorman, Brenda K.; Leung, Cynthia B.

2013-01-01

This study explored the developmental trends and phonetic category formation in bilingual children and adults. Participants included 30 fluent Spanish-English bilingual children, aged 8-11, and bilingual adults, aged 18-40. All completed gating tasks that incorporated code-mixed Spanish-English stimuli. There were significant differences in…

Parametric geometric model and shape optimization of an underwater glider with blended-wing-body

NASA Astrophysics Data System (ADS)

Sun, Chunya; Song, Baowei; Wang, Peng

2015-11-01

Underwater glider, as a new kind of autonomous underwater vehicles, has many merits such as long-range, extended-duration and low costs. The shape of underwater glider is an important factor in determining the hydrodynamic efficiency. In this paper, a high lift to drag ratio configuration, the Blended-Wing-Body (BWB), is used to design a small civilian under water glider. In the parametric geometric model of the BWB underwater glider, the planform is defined with Bezier curve and linear line, and the section is defined with symmetrical airfoil NACA 0012. Computational investigations are carried out to study the hydrodynamic performance of the glider using the commercial Computational Fluid Dynamics (CFD) code Fluent. The Kriging-based genetic algorithm, called Efficient Global Optimization (EGO), is applied to hydrodynamic design optimization. The result demonstrates that the BWB underwater glider has excellent hydrodynamic performance, and the lift to drag ratio of initial design is increased by 7% in the EGO process.

Pumping Characteristics of a Helical Screw Agitator with a Draught Tube

NASA Astrophysics Data System (ADS)

Hwang, Jung-Hoon; Kim, Youn-Jea

In the use of helical type agitator, the mixing process is usually restricted to the laminar flow regime. Common examples of laminar mixing are found where the fluid has a very high viscosity, i.e., pseudoplastic fluids. It can be indicated that a helical type agitator is sufficiently suited to the creeping flow mixing. The pumping characteristic of a Helical Screw Agitator with a draught tube (HSA) is required to evaluate its capacity for the optimal configuration of the mixing chamber. It could be executed by changing some parameters such as the number of helix, the angular velocity and the rotating direction and so on. In this study, the numerical simulation was carried out with the Eulerian multiphase mixture model and the moving mesh approximation. Some of the optimum design parameters have been developed with the aid of numerical data from the Computational Fluid Dynamics (CFD) analysis. Using the commercial code, Fluent, the pumping characteristics in the HSA are investigated from the rheological properties, and the results are graphically depicted.

High-temperature thermocline TES combining sensible and latent heat - CFD modeling and experimental validation

NASA Astrophysics Data System (ADS)

Zavattoni, Simone A.; Geissbühler, Lukas; Barbato, Maurizio C.; Zanganeh, Giw; Haselbacher, Andreas; Steinfeld, Aldo

2017-06-01

The concept of combined sensible/latent heat thermal energy storage (TES) has been exploited to mitigate an intrinsic thermocline TES systems drawback of heat transfer fluid outflow temperature reduction during discharging. In this study, the combined sensible/latent TES prototype under investigation is constituted by a packed bed of rocks and a small amount of encapsulated phase change material (AlSi12) as sensible heat and latent heat sections respectively. The thermo-fluid dynamics behavior of the combined TES prototype was analyzed by means of a computational fluid dynamics approach. Due to the small value of the characteristic vessel-to-particles diameter ratio, the effect of radial void-fraction variation, also known as channeling, was accounted for. Both the sensible and the latent heat sections of the storage were modeled as porous media under the assumption of local thermal non-equilibrium (LTNE). The commercial code ANSYS Fluent 15.0 was used to solve the model's constitutive conservation and transport equations obtaining a fairly good agreement with reference experimental measurements.

CFD modeling of space-time evolution of fast pyrolysis products in a bench-scale fluidized-bed reactor

USDA-ARS?s Scientific Manuscript database

A model for the evolution of pyrolysis products in a fluidized bed has been developed. In this study the unsteady constitutive transport equations for inert gas flow and decomposition kinetics were modeled using the commercial computational fluid dynamics (CFD) software FLUENT-12. The model system d...

How Reading Volume Affects Both Reading Fluency and Reading Achievement

ERIC Educational Resources Information Center

Allington, Richard L.

2014-01-01

Long overlooked, reading volume is actually central to the development of reading proficiencies, especially in the development of fluent reading proficiency. Generally no one in schools monitors the actual volume of reading that children engage in. We know that the commonly used commercial core reading programs provide only material that requires…

Study on aerodynamics characteristics an urban concept car for energy-efficient race

NASA Astrophysics Data System (ADS)

Ambarita, H.; Siregar, M. R.; Kawai, H.

2018-03-01

"Horas Mesin USU" is a prototype of urban concept vehicle designed by University of Sumatera Utara to participate in the energy-efficient competition. This paper deals with a numerical study on aerodynamic characteristics of the Horas Mesin USU. The numerical analyses are carried out by solving the governing equations using CFD FLUENT commercial code. The turbulent flow is closed using k-epsilon turbulence model. In the results, pathline, velocity vector and pressure distribution are plotted. By using the pressure distributions, drag and lift coefficients are calculated. In order to make a comparison, the aerodynamic characteristics of the present design are compared with commercial city car Ford-Fiesta. The averaged drag coefficients of Horas Mesin USU and Ford-Fiesta are 0.24320 and 0.29598, respectively. On the other hand, the averaged lift coefficients of the Horas Mesin USU and Ford-Fiesta are 0.03192202 and 0.09485621, respectively. This fact suggests that Ford-Fiesta has a better aerodynamic performance in comparison with Horas Mesin USU. The flow field analysis shows that there are many modifications can be proposed to improve the aerodynamic performance of the Horas Mesin USU. It is suggested to perform further analysis to improve the aerodynamic performance of Horas Mesin USU.

Speech dynamics are coded in the left motor cortex in fluent speakers but not in adults who stutter

PubMed Central

Hoang, T. N. Linh; Neef, Andreas; Paulus, Walter; Sommer, Martin

2015-01-01

The precise excitability regulation of neuronal circuits in the primary motor cortex is central to the successful and fluent production of speech. Our question was whether the involuntary execution of undesirable movements, e.g. stuttering, is linked to an insufficient excitability tuning of neural populations in the orofacial region of the primary motor cortex. We determined the speech-related time course of excitability modulation in the left and right primary motor tongue representation. Thirteen fluent speakers (four females, nine males; aged 23–44) and 13 adults who stutter (four females, nine males, aged 21–55) were asked to build verbs with the verbal prefix ‘auf’. Single-pulse transcranial magnetic stimulation was applied over the primary motor cortex during the transition phase between a fixed labiodental articulatory configuration and immediately following articulatory configurations, at different latencies after transition onset. Bilateral electromyography was recorded from self-adhesive electrodes placed on the surface of the tongue. Off-line, we extracted the motor evoked potential amplitudes and normalized these amplitudes to the individual baseline excitability during the fixed configuration. Fluent speakers demonstrated a prominent left hemisphere increase of motor cortex excitability in the transition phase (P = 0.009). In contrast, the excitability of the right primary motor tongue representation was unchanged. Interestingly, adults afflicted with stuttering revealed a lack of left-hemisphere facilitation. Moreover, the magnitude of facilitation was negatively correlated with stuttering frequency. Although orofacial midline muscles are bilaterally innervated from corticobulbar projections of both hemispheres, our results indicate that speech motor plans are controlled primarily in the left primary speech motor cortex. This speech motor planning-related asymmetry towards the left orofacial motor cortex is missing in stuttering. Moreover, a negative correlation between the amount of facilitation and stuttering severity suggests that we discovered a main physiological principle of fluent speech production and its role in stuttering. PMID:25595146

Natural convection in a parallel-plate vertical channel with discrete heating by two flush-mounted heaters: effect of the clearance between the heaters

NASA Astrophysics Data System (ADS)

Sarper, Bugra; Saglam, Mehmet; Aydin, Orhan; Avci, Mete

2018-04-01

In this study, natural convection in a vertical channel is studied experimentally and numerically. One of the channel walls is heated discretely by two flush-mounted heaters while the other is insulated. The effects of the clearance between the heaters on heat transfer and hot spot temperature while total length of the heaters keeps constant are investigated. Four different settlements of two discrete heaters are comparatively examined. Air is used as the working fluid. The range of the modified Grashof number covers the values between 9.6 × 105 and 1.53 × 10.7 Surface to surface radiation is taken into account. Flow visualizations and temperature measurements are performed in the experimental study. Numerical computations are performed using the commercial CFD code ANSYS FLUENT. The results are represented as the variations of surface temperature, hot spot temperature and Nusselt number with the modified Grashof number and the clearance between the heaters as well as velocity and temperature variations of the fluid.

Compartment Venting Analyses of Ares I First Stage Systems Tunnel

NASA Technical Reports Server (NTRS)

Wang, Qunzhen; Arner, Stephen

2009-01-01

Compartment venting analyses have been performed for the Ares I first stage systems tunnel using both the lumped parameter method and the three-dimensional (31)) transient computational fluid dynamics (CFD) approach. The main objective of venting analyses is to predict the magnitudes of differential pressures across the skin so the integrity of solid walls can be evaluated and properly designed. The lumped parameter method assumes the gas pressure and temperature inside the systems tunnel are spatially uniform, which is questionable since the tunnel is about 1,700 in. long and 4 in. wide. Therefore, 31) transient CFD simulations using the commercial CFD code FLUENT are performed in order to examine the gas pressure and temperature variations inside the tunnel. It was found that the uniform pressure and temperature assumptions inside the systems tunnel are valid during ascent. During reentry, the uniform pressure assumption is also reasonable but the uniform temperature assumption is not valid. Predicted pressure and temperature inside the systems tunnel using CFD are also compared with those from the lumped parameter method using the NASA code CHCHVENT. In general, the average pressure and temperature inside the systems tunnel from CFD are between the burst and crush results from CHCHVENT during both ascent and reentry. The skin differential pressure and pressure inside the systems tunnel relative to freestream pressure from CHCHVENT as well as velocity vectors and streamlines are also discussed in detail.

CFD Modeling of Water Flow through Sudden Contraction and Expansion in a Horizontal Pipe

ERIC Educational Resources Information Center

Kaushik, V. V. R.; Ghosh, S.; Das, G.; Das, P. K.

2011-01-01

This paper deals with the use of commercial CFD software in teaching graduate level computational fluid dynamics. FLUENT 6.3.26 was chosen as the CFD software to teach students the entire CFD process in a single course. The course objective is to help students to learn CFD, use it in some practical problems and analyze as well as validate the…

Numerical Analysis of the Cavity Flow subjected to Passive Controls Techniques

NASA Astrophysics Data System (ADS)

Melih Guleren, Kursad; Turk, Seyfettin; Mirza Demircan, Osman; Demir, Oguzhan

2018-03-01

Open-source flow solvers are getting more and more popular for the analysis of challenging flow problems in aeronautical and mechanical engineering applications. They are offered under the GNU General Public License and can be run, examined, shared and modified according to user’s requirements. SU2 and OpenFOAM are the two most popular open-source solvers in Computational Fluid Dynamics (CFD) community. In the present study, some passive control methods on the high-speed cavity flows are numerically simulated using these open-source flow solvers along with one commercial flow solver called ANSYS/Fluent. The results are compared with the available experimental data. The solver SU2 are seen to predict satisfactory the mean streamline velocity but not turbulent kinetic energy and overall averaged sound pressure level (OASPL). Whereas OpenFOAM predicts all these parameters nearly as the same levels of ANSYS/Fluent.

The impact of impaired semantic knowledge on spontaneous iconic gesture production

PubMed Central

Cocks, Naomi; Dipper, Lucy; Pritchard, Madeleine; Morgan, Gary

2013-01-01

Background Previous research has found that people with aphasia produce more spontaneous iconic gesture than control participants, especially during word-finding difficulties. There is some evidence that impaired semantic knowledge impacts on the diversity of gestural handshapes, as well as the frequency of gesture production. However, no previous research has explored how impaired semantic knowledge impacts on the frequency and type of iconic gestures produced during fluent speech compared with those produced during word-finding difficulties. Aims To explore the impact of impaired semantic knowledge on the frequency and type of iconic gestures produced during fluent speech and those produced during word-finding difficulties. Methods & Procedures A group of 29 participants with aphasia and 29 control participants were video recorded describing a cartoon they had just watched. All iconic gestures were tagged and coded as either “manner,” “path only,” “shape outline” or “other”. These gestures were then separated into either those occurring during fluent speech or those occurring during a word-finding difficulty. The relationships between semantic knowledge and gesture frequency and form were then investigated in the two different conditions. Outcomes & Results As expected, the participants with aphasia produced a higher frequency of iconic gestures than the control participants, but when the iconic gestures produced during word-finding difficulties were removed from the analysis, the frequency of iconic gesture was not significantly different between the groups. While there was not a significant relationship between the frequency of iconic gestures produced during fluent speech and semantic knowledge, there was a significant positive correlation between semantic knowledge and the proportion of word-finding difficulties that contained gesture. There was also a significant positive correlation between the speakers' semantic knowledge and the proportion of gestures that were produced during fluent speech that were classified as “manner”. Finally while not significant, there was a positive trend between semantic knowledge of objects and the production of “shape outline” gestures during word-finding difficulties for objects. Conclusions The results indicate that impaired semantic knowledge in aphasia impacts on both the iconic gestures produced during fluent speech and those produced during word-finding difficulties but in different ways. These results shed new light on the relationship between impaired language and iconic co-speech gesture production and also suggest that analysis of iconic gesture may be a useful addition to clinical assessment. PMID:24058228

Iron Catalyst Chemistry in High Pressure Carbon Monoxide Nanotube Reactor

NASA Technical Reports Server (NTRS)

Scott, Carl D.; Povitsky, Alexander; Dateo, Christopher; Gokcen, Tahir; Smalley, Richard E.

2001-01-01

The high-pressure carbon monoxide (HiPco) technique for producing single wall carbon nanotubes (SWNT) is analyzed using a chemical reaction model coupled with properties calculated along streamlines. Streamline properties for mixing jets are calculated by the FLUENT code using the k-e turbulent model for pure carbon monixide. The HiPco process introduces cold iron pentacarbonyl diluted in CO, or alternatively nitrogen, at high pressure, ca. 30 atmospheres into a conical mixing zone. Hot CO is also introduced via three jets at angles with respect to the axis of the reactor. Hot CO decomposes the Fe(CO)5 to release atomic Fe. Cluster reaction rates are from Krestinin, et aI., based on shock tube measurements. Another model is from classical cluster theory given by Girshick's team. The calculations are performed on streamlines that assume that a cold mixture of Fe(CO)5 in CO is introduced along the reactor axis. Then iron forms clusters that catalyze the formation of SWNTs from the Boudouard reaction on Fe-containing clusters by reaction with CO. To simulate the chemical process along streamlines that were calculated by the fluid dynamics code FLUENT, a time history of temperature and dilution are determined along streamlines. Alternative catalyst injection schemes are also evaluated.

LEM-CF Premixed Tool Kit

DOE Office of Scientific and Technical Information (OSTI.GOV)

2015-01-19

The purpose of LEM-CF Premixed Tool Kit is to process premixed flame simulation data from the LEM-CF solver (https://fileshare.craft-tech.com/clusters/view/lem-cf) into a large-eddy simulation (LES) subgrid model database. These databases may be used with a user-defined-function (UDF) that is included in the Tool Kit. The subgrid model UDF may be used with the ANSYS FLUENT flow solver or other commercial flow solvers.

Bilingual processing of ASL-English code-blends: The consequences of accessing two lexical representations simultaneously

PubMed Central

Emmorey, Karen; Petrich, Jennifer; Gollan, Tamar H.

2012-01-01

Bilinguals who are fluent in American Sign Language (ASL) and English often produce code-blends - simultaneously articulating a sign and a word while conversing with other ASL-English bilinguals. To investigate the cognitive mechanisms underlying code-blend processing, we compared picture-naming times (Experiment 1) and semantic categorization times (Experiment 2) for code-blends versus ASL signs and English words produced alone. In production, code-blending did not slow lexical retrieval for ASL and actually facilitated access to low-frequency signs. However, code-blending delayed speech production because bimodal bilinguals synchronized English and ASL lexical onsets. In comprehension, code-blending speeded access to both languages. Bimodal bilinguals’ ability to produce code-blends without any cost to ASL implies that the language system either has (or can develop) a mechanism for switching off competition to allow simultaneous production of close competitors. Code-blend facilitation effects during comprehension likely reflect cross-linguistic (and cross-modal) integration at the phonological and/or semantic levels. The absence of any consistent processing costs for code-blending illustrates a surprising limitation on dual-task costs and may explain why bimodal bilinguals code-blend more often than they code-switch. PMID:22773886

METC CFD simulations of hot gas filtration

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Brien, T.J.

1995-06-01

Computational Fluid Dynamic (CFD) simulations of the fluid/particle flow in several hot gas filtration vessels will be presented. These simulations have been useful in designing filtration vessels and in diagnosing problems with filter operation. The simulations were performed using the commercial code FLUENT and the METC-developed code MFIX. Simulations of the initial configuration of the Karhula facility indicated that the dirty gas flow over the filter assemblage was very non-uniform. The force of the dirty gas inlet flow was inducing a large circulation pattern that caused flow around the candles to be in opposite directions on opposite sides of themore » vessel. By introducing a system of baffles, a more uniform flow pattern was developed. This modification may have contributed to the success of the project. Several simulations of configurations proposed by Industrial Filter and Pump were performed, varying the position of the inlet. A detailed resolution of the geometry of the candles allowed determination of the flow between the individual candles. Recent simulations in support of the METC/CeraMem Cooperative Research and Development Agreement have analyzed the flow in the vessel during the cleaning back-pulse. Visualization of experiments at the CeraMem cold-flow facility provided confidence in the use of CFD. Extensive simulations were then performed to assist in the design of the hot test facility being built by Ahlstrom/Pyropower. These tests are intended to demonstrate the CeraMem technology.« less

3D CFD ELECTROCHEMICAL AND HEAT TRANSFER MODEL OF AN INTERNALLY MANIFOLDED SOLID OXIDE ELECTROLYSIS CELL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant L. Hawkes; James E. O'Brien; Greg Tao

2011-11-01

A three-dimensional computational fluid dynamics (CFD) electrochemical model has been created to model high-temperature electrolysis cell performance and steam electrolysis in an internally manifolded planar solid oxide electrolysis cell (SOEC) stack. This design is being evaluated at the Idaho National Laboratory for hydrogen production from nuclear power and process heat. Mass, momentum, energy, and species conservation and transport are provided via the core features of the commercial CFD code FLUENT. A solid-oxide fuel cell (SOFC) model adds the electrochemical reactions and loss mechanisms and computation of the electric field throughout the cell. The FLUENT SOFC user-defined subroutine was modified formore » this work to allow for operation in the SOEC mode. Model results provide detailed profiles of temperature, operating potential, steam-electrode gas composition, oxygen-electrode gas composition, current density and hydrogen production over a range of stack operating conditions. Single-cell and five-cell results will be presented. Flow distribution through both models is discussed. Flow enters from the bottom, distributes through the inlet plenum, flows across the cells, gathers in the outlet plenum and flows downward making an upside-down ''U'' shaped flow pattern. Flow and concentration variations exist downstream of the inlet holes. Predicted mean outlet hydrogen and steam concentrations vary linearly with current density, as expected. Effects of variations in operating temperature, gas flow rate, oxygen-electrode and steam-electrode current density, and contact resistance from the base case are presented. Contour plots of local electrolyte temperature, current density, and Nernst potential indicate the effects of heat transfer, reaction cooling/heating, and change in local gas composition. Results are discussed for using this design in the electrolysis mode. Discussion of thermal neutral voltage, enthalpy of reaction, hydrogen production, cell thermal efficiency, cell electrical efficiency, and Gibbs free energy are discussed and reported herein.« less

Computational Study of Ventilation and Disease Spread in Poultry Houses

NASA Astrophysics Data System (ADS)

Cimbala, John; Pawar, Sourabh; Wheeler, Eileen; Lindberg, Darla

2006-11-01

The air flow in and around poultry houses has been studied numerically with the goal of determining disease spread characteristics and comparing ventilation schemes. A typical manure-belt layer egg production facility is considered. The continuity, momentum, and energy equations are solved for flow both inside and outside poultry houses using the commercial computational fluid dynamics (CFD) code FLUENT. Both simplified two-dimensional and fully three-dimensional geometries are modeled. The spread of virus particles is considered to be analogous to diffusion of a tracer contaminant gas, in this case ammonia. The effect of thermal plumes produced by the hens in the poultry house is also considered. Two ventilation schemes with opposite flow directions are compared. Contours of temperature and ammonia mass fraction for both cases are obtained and compared. The analysis shows that ventilation and air quality characteristics are much better for the case in which the air flow is from bottom to top (enhancing the thermal plume) instead of from top to bottom (fighting the thermal plume) as in most poultry houses. This has implications in air quality control in the event of epidemic outbreaks of avian flu or other infectious diseases.

Modeling and validation of heat and mass transfer in individual coffee beans during the coffee roasting process using computational fluid dynamics (CFD).

PubMed

Alonso-Torres, Beatriz; Hernández-Pérez, José Alfredo; Sierra-Espinoza, Fernando; Schenker, Stefan; Yeretzian, Chahan

2013-01-01

Heat and mass transfer in individual coffee beans during roasting were simulated using computational fluid dynamics (CFD). Numerical equations for heat and mass transfer inside the coffee bean were solved using the finite volume technique in the commercial CFD code Fluent; the software was complemented with specific user-defined functions (UDFs). To experimentally validate the numerical model, a single coffee bean was placed in a cylindrical glass tube and roasted by a hot air flow, using the identical geometrical 3D configuration and hot air flow conditions as the ones used for numerical simulations. Temperature and humidity calculations obtained with the model were compared with experimental data. The model predicts the actual process quite accurately and represents a useful approach to monitor the coffee roasting process in real time. It provides valuable information on time-resolved process variables that are otherwise difficult to obtain experimentally, but critical to a better understanding of the coffee roasting process at the individual bean level. This includes variables such as time-resolved 3D profiles of bean temperature and moisture content, and temperature profiles of the roasting air in the vicinity of the coffee bean.

CFD Modeling of Flow, Temperature, and Concentration Fields in a Pilot-Scale Rotary Hearth Furnace

NASA Astrophysics Data System (ADS)

Liu, Ying; Su, Fu-Yong; Wen, Zhi; Li, Zhi; Yong, Hai-Quan; Feng, Xiao-Hong

2014-01-01

A three-dimensional mathematical model for simulation of flow, temperature, and concentration fields in a pilot-scale rotary hearth furnace (RHF) has been developed using a commercial computational fluid dynamics software, FLUENT. The layer of composite pellets under the hearth is assumed to be a porous media layer with CO source and energy sink calculated by an independent mathematical model. User-defined functions are developed and linked to FLUENT to process the reduction process of the layer of composite pellets. The standard k-ɛ turbulence model in combination with standard wall functions is used for modeling of gas flow. Turbulence-chemistry interaction is taken into account through the eddy-dissipation model. The discrete ordinates model is used for modeling of radiative heat transfer. A comparison is made between the predictions of the present model and the data from a test of the pilot-scale RHF, and a reasonable agreement is found. Finally, flow field, temperature, and CO concentration fields in the furnace are investigated by the model.

Stuttered and Fluent Speakers' Heart Rate and Skin Conductance in Response to Fluent and Stuttered Speech

ERIC Educational Resources Information Center

Zhang, Jianliang; Kalinowski, Joseph; Saltuklaroglu, Tim; Hudock, Daniel

2010-01-01

Background: Previous studies have found simultaneous increases in skin conductance response and decreases in heart rate when normally fluent speakers watched and listened to stuttered speech compared with fluent speech, suggesting that stuttering induces arousal and emotional unpleasantness in listeners. However, physiological responses of persons…

Fluent Aphasia in Telugu: A Case Comparison Study of Semantic Dementia and Stroke Aphasia

ERIC Educational Resources Information Center

Alladi, Suvarna; Mridula, Rukmini; Mekala, Shailaja; Rupela, Vani; Kaul, Subhash

2010-01-01

This study presents two cases with fluent aphasia in Telugu with semantic dementia and post-stroke fluent aphasia. Comparable scores were obtained on the conventional neuropsychological and language tests that were administered on the two cases. Both cases demonstrated fluent, grammatical and well-articulated speech with little content, impaired…

A Comparative Study Using CFD to Predict Iced Airfoil Aerodynamics

NASA Technical Reports Server (NTRS)

Chi, x.; Li, Y.; Chen, H.; Addy, H. E.; Choo, Y. K.; Shih, T. I-P.

2005-01-01

WIND, Fluent, and PowerFLOW were used to predict the lift, drag, and moment coefficients of a business-jet airfoil with a rime ice (rough and jagged, but no protruding horns) and with a glaze ice (rough and jagged end has two or more protruding horns) for angles of attack from zero to and after stall. The performance of the following turbulence models were examined by comparing predictions with available experimental data. Spalart-Allmaras (S-A), RNG k-epsilon, shear-stress transport, v(sup 2)-f, and a differential Reynolds stress model with and without non-equilibrium wall functions. For steady RANS simulations, WIND and FLUENT were found to give nearly identical results if the grid about the iced airfoil, the turbulence model, and the order of accuracy of the numerical schemes used are the same. The use of wall functions was found to be acceptable for the rime ice configuration and the flow conditions examined. For rime ice, the S-A model was found to predict accurately until near the stall angle. For glaze ice, the CFD predictions were much less satisfactory for all turbulence models and codes investigated because of the large separated region produced by the horns. For unsteady RANS, WIND and FLUENT did not provide better results. PowerFLOW, based on the Lattice Boltzmann method, gave excellent results for the lift coefficient at and near stall for the rime ice, where the flow is inherently unsteady.

Aerodynamic investigations of a disc-wing

NASA Astrophysics Data System (ADS)

Dumitrache, Alexandru; Frunzulica, Florin; Grigorescu, Sorin

2017-01-01

The purpose of this paper is to evaluate the aerodynamic characteristics of a wing-disc, for a civil application in the fire-fighting system. The aerodynamic analysis is performed using a CFD code, named ANSYS Fluent, in the flow speed range up to 25 m/s, at lower and higher angle of attack. The simulation is three-dimensional, using URANS completed by a SST turbulence model. The results are used to examine the flow around the disc with increasing angle of attack and the structure of the wake.

Numerical modeling tools for chemical vapor deposition

NASA Technical Reports Server (NTRS)

Jasinski, Thomas J.; Childs, Edward P.

1992-01-01

Development of general numerical simulation tools for chemical vapor deposition (CVD) was the objective of this study. Physical models of important CVD phenomena were developed and implemented into the commercial computational fluid dynamics software FLUENT. The resulting software can address general geometries as well as the most important phenomena occurring with CVD reactors: fluid flow patterns, temperature and chemical species distribution, gas phase and surface deposition. The physical models are documented which are available and examples are provided of CVD simulation capabilities.

Development and Assessment of CFD Models Including a Supplemental Program Code for Analyzing Buoyancy-Driven Flows Through BWR Fuel Assemblies in SFP Complete LOCA Scenarios

NASA Astrophysics Data System (ADS)

Artnak, Edward Joseph, III

This work seeks to illustrate the potential benefits afforded by implementing aspects of fluid dynamics, especially the latest computational fluid dynamics (CFD) modeling approach, through numerical experimentation and the traditional discipline of physical experimentation to improve the calibration of the severe reactor accident analysis code, MELCOR, in one of several spent fuel pool (SFP) complete loss-ofcoolant accident (LOCA) scenarios. While the scope of experimental work performed by Sandia National Laboratories (SNL) extends well beyond that which is reasonably addressed by our allotted resources and computational time in accordance with initial project allocations to complete the report, these simulated case trials produced a significant array of supplementary high-fidelity solutions and hydraulic flow-field data in support of SNL research objectives. Results contained herein show FLUENT CFD model representations of a 9x9 BWR fuel assembly in conditions corresponding to a complete loss-of-coolant accident scenario. In addition to the CFD model developments, a MATLAB based controlvolume model was constructed to independently assess the 9x9 BWR fuel assembly under similar accident scenarios. The data produced from this work show that FLUENT CFD models are capable of resolving complex flow fields within a BWR fuel assembly in the realm of buoyancy-induced mass flow rates and that characteristic hydraulic parameters from such CFD simulations (or physical experiments) are reasonably employed in corresponding constitutive correlations for developing simplified numerical models of comparable solution accuracy.

SERIIUS-MAGEEP Visiting Scholars Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ortega, Jesus D.

2014-08-28

Recent studies have assessed closed-loop supercritical carbon dioxide (s-CO 2) Brayton cycles to be a higher energy-density system in comparison to equivalent superheated steam Rankine systems. At turbine inlet conditions of 700°C and 20 MPa, a cycle thermal efficiency of ~50% can be achieved. Achieving these high efficiencies will help concentrating solar power (CSP) technologies to become a competitive alternative to current power generation methods. To incorporate an s-CO 2 Brayton power cycle in a solar power tower system, the development of a solar receiver capable of providing an outlet temperature of 700°C (at 20 MPa) is necessary. To satisfymore » the temperature requirements of an s-CO 2 Brayton cycle with recuperation and recompression, the s-CO 2 must undergo a temperature rise of ~200°C as it flows through the solar receiver. The main objective is to develop an optical-thermal-fluid and structural model to validate a tubular receiver that will receive a heat input ~0.33 MWth from the heliostat field at the National Solar Thermal Test Facility (NSTTF), Albuquerque, NM, USA. We also commenced the development of computational models and testing of air receivers being developed by the Indian Institute of Science (IISc) and the Indian Institute of Technology in Bombay (IIT-B). The helical tubular receiver is expected to counteract the effect of thermal expansion while using a cavity to reduce the radiative and convective losses. Initially, this receiver will be tested for a temperature range of 100-300°C under 1 MPa of pressurized air. The helical air receiver will be exposed to 10kWth to achieve a temperature rise of ~200°C. Preliminary tests to validate the modeling will be performed before the design and construction of a larger scale receiver. Lastly, I focused on the development of a new computational tool that would allow us to perform a nodal creep-fatigue analysis on the receivers and heat exchangers being developed. This tool was developed using MATLAB and is capable of processing the results obtained from ANSYS Fluent and Structural combined, which was limited when using commercial software. The main advantage of this code is that it can be modified to run in parallel making it more affordable and faster compared to commercial codes available. The code is in the process of validation and is currently being compared to nCode Design Life.« less

Thermal model development and validation for rapid filling of high pressure hydrogen tanks

DOE PAGES

Johnson, Terry A.; Bozinoski, Radoslav; Ye, Jianjun; ...

2015-06-30

This paper describes the development of thermal models for the filling of high pressure hydrogen tanks with experimental validation. Two models are presented; the first uses a one-dimensional, transient, network flow analysis code developed at Sandia National Labs, and the second uses the commercially available CFD analysis tool Fluent. These models were developed to help assess the safety of Type IV high pressure hydrogen tanks during the filling process. The primary concern for these tanks is due to the increased susceptibility to fatigue failure of the liner caused by the fill process. Thus, a thorough understanding of temperature changes ofmore » the hydrogen gas and the heat transfer to the tank walls is essential. The effects of initial pressure, filling time, and fill procedure were investigated to quantify the temperature change and verify the accuracy of the models. In this paper we show that the predictions of mass averaged gas temperature for the one and three-dimensional models compare well with the experiment and both can be used to make predictions for final mass delivery. Furthermore, due to buoyancy and other three-dimensional effects, however, the maximum wall temperature cannot be predicted using one-dimensional tools alone which means that a three-dimensional analysis is required for a safety assessment of the system.« less

The effect of soot modeling on thermal radiation in buoyant turbulent diffusion flames

NASA Astrophysics Data System (ADS)

Snegirev, A.; Kokovina, E.; Tsoy, A.; Harris, J.; Wu, T.

2016-09-01

Radiative impact of buoyant turbulent diffusion flames is the driving force in fire development. Radiation emission and re-absorption is controlled by gaseous combustion products, mainly CO2 and H2O, and by soot. Relative contribution of gas and soot radiation depends on the fuel sooting propensity and on soot distribution in the flame. Soot modeling approaches incorporated in big commercial codes were developed and calibrated for momentum-dominated jet flames, and these approaches must be re-evaluated when applied to the buoyant flames occurring in fires. The purpose of this work is to evaluate the effect of the soot models available in ANSYS FLUENT on the predictions of the radiative fluxes produced by the buoyant turbulent diffusion flames with considerably different soot yields. By means of large eddy simulations, we assess capability of the Moss-Brooks soot formation model combined with two soot oxidation submodels to predict methane- and heptane-fuelled fires, for which radiative flux measurements are available in the literature. We demonstrate that the soot oxidation models could be equally important as soot formation ones to predict the soot yield in the overfire region. Contribution of soot in the radiation emission by the flame is also examined, and predicted radiative fluxes are compared to published experimental data.

Numerical investigation on forced convection in rectangular cross section micro-channels with nanofluids

NASA Astrophysics Data System (ADS)

Buonomo, B.; Cirillo, L.; Manca, O.; Nardini, S.; Tamburrino, S.

2017-01-01

In this paper a numerical investigation on laminar forced convection flow of a water-Al2O3 nanofluid in a rectangular microchannel is accomplished. A constant and uniform heat flux on the external surfaces has been applied and a single-phase model approach has been employed. The analysis has been performed in steady state regime for particle size in nanofluids equal to 38 nm. The CFD commercial code Fluent has been employed in order to solve the 3-D numerical model. The geometrical configuration under consideration consists in a duct with a rectangular shaped crossing area. A steady laminar flow and different nanoparticle volume fractions have been considered. The base fluid is water and nanoparticles are made up of alumina (Al2O3). The length the edge and height of the duct are 0.030 m, 1.7 x10-7 and 1.1 x10-7 m, respectively. Results are presented in terms of temperature and velocity distributions, surface shear stress and heat transfer convective coefficient, Nusselt number and required pumping power profiles. Comparison with results related to the fluid dynamic and thermal behaviors are carried out in order to evaluate the enhancement due to the presence of nanoparticles in terms of volumetric concentration.

Analysis of Wind Forces on Roof-Top Solar Panel

NASA Astrophysics Data System (ADS)

Panta, Yogendra; Kudav, Ganesh

2011-03-01

Structural loads on solar panels include forces due to high wind, gravity, thermal expansion, and earthquakes. International Building Code (IBC) and the American Society of Civil Engineers are two commonly used approaches in solar industries to address wind loads. Minimum Design Loads for Buildings and Other Structures (ASCE 7-02) can be used to calculate wind uplift loads on roof-mounted solar panels. The present study is primarily focused on 2D and 3D modeling with steady, and turbulent flow over an inclined solar panel on the flat based roof to predict the wind forces for designing wind management system. For the numerical simulation, 3-D incompressible flow with the standard k- ɛ was adopted and commercial CFD software ANSYS FLUENT was used. Results were then validated with wind tunnel experiments with a good agreement. Solar panels with various aspect ratios for various high wind speeds and angle of attacks were modeled and simulated in order to predict the wind loads in various scenarios. The present study concluded to reduce the strong wind uplift by designing a guide plate or a deflector before the panel. Acknowledgments to Northern States Metal Inc., OH (GK & YP) and School of Graduate Studies of YSU for RP & URC 2009-2010 (YP).

Software and Systems Test Track Architecture and Concept Definition

DTIC Science & Technology

2007-05-01

Light 11.0 11.0 11.0 ASC Flex Free Software Foundation 2.5.31 2.5.31 2.5.31 ASC Fluent Fluent Inc. 6.2.26 6.2.26 6.2.26 6.2.26 ASC FMD ...11 ERDC Fluent Fluent 6.2.16 ERDC Fortran 77/90 compiler Compaq/Cray/SGI 7.4 7.4.3m 7.4.4m 5.6 ERDC FTA Platform 1.1 1.1 1.1 ERDC GAMESS

Numerical simulation of the baking of porous anode carbon in a vertical flue ring furnace

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobsen, M.; Melaaen, M.C.

The interaction of pitch pyrolysis in porous anode carbon during heating and volatiles combustion in the flue gas channel has been analyzed to gain insight in the anode baking process. A two-dimensional geometry of a flue gas channel adjacent to a porous flue gas wall, packing coke, and an anode was used for studying the effect of heating rate on temperature gradients and internal gas pressure in the anodes. The mathematical model included porous heat and mass transfer, pitch pyrolysis, combustion of volatiles, radiation, and turbulent channel flow. The mathematical model was developed through source code modification of the computationalmore » fluid dynamics code FLUENT. The model was useful for studying the effects of heating rate, geometry, and anode properties.« less

Communication between South Asian patients and GPs: comparative study using the Roter Interactional Analysis System

PubMed Central

Neal, Richard D; Ali, Nasreen; Atkin, Karl; Allgar, Victoria L; Ali, Shahid; Coleman, Tim

2006-01-01

Background The UK South Asian population has poorer health outcomes. Little is known about their process of care in general practice, or in particular the process of communication with GPs. Aim To compare the ways in which white and South Asian patients communicate with white GPs. Design of study Observational study of video-recorded consultations using the Roter Interactional Analysis System (RIAS). Setting West Yorkshire, UK. Method One hundred and eighty–three consultations with 11 GPs in West Yorkshire, UK were video-recorded and analysed. Results Main outcome measures were consultation length, verbal domination, 16 individual abridged RIAS categories, and three composite RIAS categories; with comparisons between white patients, South Asian patients fluent in English and South Asian patients non-fluent in English. South Asians fluent in English had the shortest consultations and South Asians non-fluent in English the longest consultations (one-way ANOVA F = 7.173, P = 0.001). There were no significant differences in verbal domination scores between the three groups. White patients had more affective (emotional) consultations than South Asian patients, and played a more active role in their consultations, as did their GPs. GPs spent less time giving information to South Asian patients who were not fluent in English and more time asking questions. GPs spent less time giving information to South Asian patients fluent in English compared with white patients. Conclusions These findings were expected between patients fluent and non-fluent in English but do demonstrate their nature. The differences between white patients and South Asian patients fluent in English warrant further explanation. How much of this was due to systematic differences in behaviour by the GPs, or was in response to patients' differing needs and expectations is unknown. These differences may contribute to differences in health outcomes. PMID:17132355

What’s the Story? The Tale of Reading Fluency Told at Speed

PubMed Central

Benjamin, Christopher F. A.; Gaab, Nadine

2012-01-01

Fluent readers process written text rapidly and accurately, and comprehend what they read. Historically, reading fluency has been modeled as the product of discrete skills such as single word decoding. More recent conceptualizations emphasize that fluent reading is the product of competency in, and the coordination of, multiple cognitive sub-skills (a multi-componential view). In this study, we examined how the pattern of activation in core reading regions changes as the ability to read fluently is manipulated through reading speed. We evaluated 13 right-handed adults with a novel fMRI task assessing fluent sentence reading and lower-order letter reading at each participant’s normal fluent reading speed, as well as constrained (slowed) and accelerated reading speeds. Comparing fluent reading conditions with rest revealed regions including bilateral occipito-fusiform, left middle temporal, and inferior frontal gyral clusters across reading speeds. The selectivity of these regions’ responses to fluent sentence reading was shown by comparison with the letter reading task. Region of interest analyses showed that at constrained and accelerated speeds these regions responded significantly more to fluent sentence reading. Critically, as reading speed increased, activation increased in a single reading-related region: occipital/fusiform cortex (left > right). These results demonstrate that while brain regions engaged in reading respond selectively during fluent reading, these regions respond differently as the ability to read fluently is manipulated. Implications for our understanding of reading fluency, reading development, and reading disorders are discussed. PMID:21954000

Fluent aphasia in children: definition and natural history.

PubMed

Klein, S K; Masur, D; Farber, K; Shinnar, S; Rapin, I

1992-01-01

We compared the course of a preschool child we followed for 4 years with published reports of 24 children with fluent aphasia. Our patient spoke fluently within 3 weeks of the injury. She was severely anomic and made many semantic paraphasic errors. Unlike other children with fluent aphasia, her prosody of speech was impaired initially, and her spontaneous language was dominated by stock phrases. Residual deficits include chronic impairment of auditory comprehension, repetition, and word retrieval. She has more disfluencies in spontaneous speech 4 years after her head injury than acutely. School achievement in reading and mathematics remains below age level. Attention to the timing of recovery of fluent speech and to the characteristics of receptive and expressive language over time will permit more accurate description of fluent aphasia in childhood.

Flat plate solar air heater with latent heat storage

NASA Astrophysics Data System (ADS)

Touati, B.; Kerroumi, N.; Virgone, J.

2017-02-01

Our work contains two parts, first is an experimental study of the solar air heater with a simple flow and forced convection, we can use thatlaste oneit in many engineering's sectors as solardrying, space heating in particular. The second part is a numerical study with ansys fluent 15 of the storage of part of this solar thermal energy produced,using latent heat by using phase change materials (PCM). In the experimental parts, we realize and tested our solar air heater in URER.MS ADRAR, locate in southwest Algeria. Where we measured the solarradiation, ambient temperature, air flow, thetemperature of the absorber, glasses and the outlet temperature of the solar air heater from the Sunrise to the sunset. In the second part, we added a PCM at outlet part of the solar air heater. This PCM store a part of the energy produced in the day to be used in peak period at evening by using the latent heat where the PCMs present a grateful storagesystem.A numerical study of the fusion or also named the charging of the PCM using ANSYS Fluent 15, this code use the method of enthalpies to solve the fusion and solidification formulations. Furthermore, to improve the conjugate heat transfer between the heat transfer fluid (Air heated in solar plate air heater) and the PCM, we simulate the effect of adding fins to our geometry. Also, four user define are write in C code to describe the thermophysicalpropriety of the PCM, and the inlet temperature of our geometry which is the temperature at the outflow of the solar heater.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pauzi, Anas Muhamad, E-mail: Anas@uniten.edu.my; Cioncolini, Andrea; Iacovides, Hector

The Molten Salt Reactor (MSR) is one of the most promising system proposed by Generation IV Forum (GIF) for future nuclear reactor systems. Advantages of the MSR are significantly larger compared to other reactor system, and is mainly achieved from its liquid nature of fuel and coolant. Further improvement to this system, which is a natural circulating molten fuel salt inside its tube in the reactor core is proposed, to achieve advantages of reducing and simplifying the MSR design proposed by GIF. Thermal hydraulic analysis on the proposed system was completed using a commercial computation fluid dynamics (CFD) software calledmore » FLUENT by ANSYS Inc. An understanding on theory behind this unique natural circulation flow inside the tube caused by fission heat generated in molten fuel salt and tube cooling was briefly introduced. Currently, no commercial CFD software could perfectly simulate natural circulation flow, hence, modeling this flow problem in FLUENT is introduced and analyzed to obtain best simulation results. Results obtained demonstrate the existence of periodical transient nature of flow problem, hence improvements in tube design is proposed based on the analysis on temperature and velocity profile. Results show that the proposed system could operate at up to 750MW core power, given that turbulence are enhanced throughout flow region, and precise molten fuel salt physical properties could be defined. At the request of the authors and the Proceedings Editor the name of the co-author Andrea Cioncolini was corrected from Andrea Coincolini. The same name correction was made in the Acknowledgement section on page 030004-10 and in reference number 4. The updated article was published on 11 May 2015.« less

Towards Rocket Engine Components with Increased Strength and Robust Operating Characteristics

NASA Technical Reports Server (NTRS)

Marcu, Bogdan; Hadid, Ali; Lin, Pei; Balcazar, Daniel; Rai, Man Mohan; Dorney, Daniel J.

2005-01-01

High-energy rotating machines, powering liquid propellant rocket engines, are subject to various sources of high and low cycle fatigue generated by unsteady flow phenomena. Given the tremendous need for reliability in a sustainable space exploration program, a fundamental change in the design methodology for engine components is required for both launch and space based systems. A design optimization system based on neural-networks has been applied and demonstrated in the redesign of the Space Shuttle Main Engine (SSME) Low Pressure Oxidizer Turbo Pump (LPOTP) turbine nozzle. One objective of the redesign effort was to increase airfoil thickness and thus increase its strength while at the same time detuning the vane natural frequency modes from the vortex shedding frequency. The second objective was to reduce the vortex shedding amplitude. The third objective was to maintain this low shedding amplitude even in the presence of large manufacturing tolerances. All of these objectives were achieved without generating any detrimental effects on the downstream flow through the turbine, and without introducing any penalty in performance. The airfoil redesign and preliminary assessment was performed in the Exploration Technology Directorate at NASA ARC. Boeing/Rocketdyne and NASA MSFC independently performed final CFD assessments of the design. Four different CFD codes were used in this process. They include WIL DCA T/CORSAIR (NASA), FLUENT (commercial), TIDAL (Boeing Rocketdyne) and, a new family (AardvarWPhantom) of CFD analysis codes developed at NASA MSFC employing LOX fluid properties and a Generalized Equation Set formulation. Extensive aerodynamic performance analysis and stress analysis carried out at Boeing Rocketdyne and NASA MSFC indicate that the redesign objectives have been fully met. The paper presents the results of the assessment analysis and discusses the future potential of robust optimal design for rocket engine components.

Solar tower enhanced natural draft dry cooling tower

NASA Astrophysics Data System (ADS)

Yang, Huiqiang; Xu, Yan; Acosta-Iborra, Alberto; Santana, Domingo

2017-06-01

Concentrating Solar Power (CSP) plants are located in desert areas where the Direct Normal Irradiance (DNI) value is very high. Since water resource is scarcely available, mechanical draft cooing technology is commonly used, with power consumption of mechanical fans being approximately 2% of the total power generated. Today, there is only one solar power plant (Khi Solar One in South Africa) uses a condenser installed in a Natural Draft Cooling (NDC) tower that avoids the windage loss of water occurring in wet cooling towers. Although, Khi Solar One is a cavity receiver power tower, the receivers can be hung onto the NDC tower. This paper looks at a novel integration of a NDC tower into an external molten salt receiver of a solar power plant, which is one of a largest commercial molten salt tower in China, with 100MWe power capacity. In this configuration study, the NDC tower surrounds the concrete tower of the receiver concentrically. In this way, the receiver concrete tower is the central support of the NDC tower, which consists of cable networks that are fixed to the concrete tower and suspended at a certain height over the floor. The cable networks support the shell of the NDC tower. To perform a preliminary analysis of the behavior of this novel configuration, two cases of numerical simulation in three dimensional (3D) models have been solved using the commercial Computational Fluid Dynamics (CFD) code, ANSYS Fluent 6.3. The results show that the integration of the NDC tower into an external central receiver tower is feasible. Additionally, the total heat transfer rate is not reduced but slightly increases when the molten salt receiver is in operation because of the additional natural draft induced by the high temperature of the receiver.

Listeners' identification and discrimination of digitally manipulated sounds as prolongations.

PubMed

Kawai, Norimune; Healey, E Charles; Carrell, Thomas D

2007-08-01

The present study had two main purposes. One was to examine if listeners perceive gradually increasing durations of a voiceless fricative categorically ("fluent" versus "stuttered") or continuously (gradient perception from fluent to stuttered). The second purpose was to investigate whether there are gender differences in how listeners perceive various duration of sounds as "prolongations." Forty-four listeners were instructed to rate the duration of the // in the word "shape" produced by a normally fluent speaker. The target word was embedded in the middle of an experimental phrase and the initial // sound was digitally manipulated to create a range of fluent to stuttered sounds. This was accomplished by creating 20 ms stepwise increments for sounds ranging from 120 to 500 ms in duration. Listeners were instructed to give a rating of 1 for a fluent word and a rating of 100 for a stuttered word. The results showed listeners perceived the range of sounds continuously. Also, there was a significant gender difference in that males rated fluent sounds higher than females but female listeners rated stuttered sounds higher than males. The implications of these results are discussed.

Performance Assessment of the Commercial CFD Software for the Prediction of the Reactor Internal Flow

NASA Astrophysics Data System (ADS)

Lee, Gong Hee; Bang, Young Seok; Woo, Sweng Woong; Kim, Do Hyeong; Kang, Min Ku

2014-06-01

As the computer hardware technology develops the license applicants for nuclear power plant use the commercial CFD software with the aim of reducing the excessive conservatism associated with using simplified and conservative analysis tools. Even if some of CFD software developer and its user think that a state of the art CFD software can be used to solve reasonably at least the single-phase nuclear reactor problems, there is still limitation and uncertainty in the calculation result. From a regulatory perspective, Korea Institute of Nuclear Safety (KINS) is presently conducting the performance assessment of the commercial CFD software for nuclear reactor problems. In this study, in order to examine the validity of the results of 1/5 scaled APR+ (Advanced Power Reactor Plus) flow distribution tests and the applicability of CFD in the analysis of reactor internal flow, the simulation was conducted with the two commercial CFD software (ANSYS CFX V.14 and FLUENT V.14) among the numerous commercial CFD software and was compared with the measurement. In addition, what needs to be improved in CFD for the accurate simulation of reactor core inlet flow was discussed.

Aerodynamic Analysis Over Double Wedge Airfoil

NASA Astrophysics Data System (ADS)

Prasad, U. S.; Ajay, V. S.; Rajat, R. H.; Samanyu, S.

2017-05-01

Aeronautical studies are being focused more towards supersonic flights and methods to attain a better and safer flight with highest possible performance. Aerodynamic analysis is part of the whole procedure, which includes focusing on airfoil shapes which will permit sustained flight of aircraft at these speeds. Airfoil shapes differ based on the applications, hence the airfoil shapes considered for supersonic speeds are different from the ones considered for Subsonic. The present work is based on the effects of change in physical parameter for the Double wedge airfoil. Mach number range taken is for transonic and supersonic. Physical parameters considered for the Double wedge case with wedge angle (ranging from 5 degree to 15 degree. Available Computational tools are utilized for analysis. Double wedge airfoil is analysed at different Angles of attack (AOA) based on the wedge angle. Analysis is carried out using fluent at standard conditions with specific heat ratio taken as 1.4. Manual calculations for oblique shock properties are calculated with the help of Microsoft excel. MATLAB is used to form a code for obtaining shock angle with Mach number and wedge angle at the given parameters. Results obtained from manual calculations and fluent analysis are cross checked.

A three-dimensional numerical simulation of cell behavior in a flow chamber based on fluid-solid interaction.

PubMed

Bai, Long; Cui, Yuhong; Zhang, Yixia; Zhao, Na

2014-01-01

The mechanical behavior of blood cells in the vessels has a close relationship with the physical characteristics of the blood and the cells. In this paper, a numerical simulation method was proposed to understand a single-blood cell's behavior in the vessels based on fluid-solid interaction method, which was conducted under adaptive time step and fixed time step, respectively. The main programme was C++ codes, which called FLUENT and ANSYS software, and UDF and APDL acted as a messenger to connect FLUENT and ANSYS for exchanging data. The computing results show: (1) the blood cell moved towards the bottom of the flow chamber in the beginning due to the influence of gravity, then it began to jump up when reached a certain height rather than touching the bottom. It could move downwards again after jump up, the blood cell could keep this way of moving like dancing continuously in the vessels; (2) the blood cell was rolling and deforming all the time; the rotation had oscillatory changes and the deformation became conspicuously when the blood cell was dancing. This new simulation method and results can be widely used in the researches of cytology, blood, cells, etc.

Global simulation of the Czochralski silicon crystal growth in ANSYS FLUENT

NASA Astrophysics Data System (ADS)

Kirpo, Maksims

2013-05-01

Silicon crystals for high efficiency solar cells are produced mainly by the Czochralski (CZ) crystal growth method. Computer simulations of the CZ process established themselves as a basic tool for optimization of the growth process which allows to reduce production costs keeping high quality of the crystalline material. The author shows the application of the general Computational Fluid Dynamics (CFD) code ANSYS FLUENT to solution of the static two-dimensional (2D) axisymmetric global model of the small industrial furnace for growing of silicon crystals with a diameter of 100 mm. The presented numerical model is self-sufficient and incorporates the most important physical phenomena of the CZ growth process including latent heat generation during crystallization, crystal-melt interface deflection, turbulent heat and mass transport, oxygen transport, etc. The demonstrated approach allows to find the heater power for the specified pulling rate of the crystal but the obtained power values are smaller than those found in the literature for the studied furnace. However, the described approach is successfully verified with the respect to the heater power by its application for the numerical simulations of the real CZ pullers by "Bosch Solar Energy AG".

Computer modeling of a hot filament diamond deposition reactor

NASA Technical Reports Server (NTRS)

Kuczmarski, Maria A.; Washlock, Paul A.; Angus, John C.

1991-01-01

A commercial fluid mechanics program, FLUENT, has been applied to the modeling of a hot-filament diamond deposition reactor. Streamlines and contours of constant temperature and species concentrations are obtained for practical reactor geometries and conditions. The modeling is presently restricted to two-dimensional simulations and to a chemical mechanism of ten independent homogeneous and surface reactions. Comparisons are made between predicted power consumption, substrate temperature, and concentrations of atomic hydrogen and methyl-radical with values taken from the literature. The results to date indicate that the modeling can aid in the rational design and analysis of practical reactor configurations.

Running ANSYS Fluent on the WinHPC System | High-Performance Computing |

Science.gov Websites

. If you don't have one, see WinHPC system user basics. Check License Use Status Start > All Jason Lustbader. Run Using Fluent Launcher Start Fluent launcher by opening: Start > All Programs > . Available node groups can be found from HPC Job Manager. Start > All Programs > Microsoft HPC Pack

How Do Fluent and Poor Readers' Endurance Differ in Reading?

ERIC Educational Resources Information Center

Bastug, Muhammet; Keskin, Hasan Kagan; Akyol, Mustafa

2017-01-01

It was observed in this research how endurance status of fluent readers and poor readers changed as the text became longer. 40 students of the primary school 4th-grade, 20 were fluent readers and other 20 were poor readers, participated in the research. A narrative text was utilised in the data collection process. Students' oral readings were…

Experience with turbulence interaction and turbulence-chemistry models at Fluent Inc.

NASA Technical Reports Server (NTRS)

Choudhury, D.; Kim, S. E.; Tselepidakis, D. P.; Missaghi, M.

1995-01-01

This viewgraph presentation discusses (1) turbulence modeling: challenges in turbulence modeling, desirable attributes of turbulence models, turbulence models in FLUENT, and examples using FLUENT; and (2) combustion modeling: turbulence-chemistry interaction and FLUENT equilibrium model. As of now, three turbulence models are provided: the conventional k-epsilon model, the renormalization group model, and the Reynolds-stress model. The renormalization group k-epsilon model has broadened the range of applicability of two-equation turbulence models. The Reynolds-stress model has proved useful for strongly anisotropic flows such as those encountered in cyclones, swirlers, and combustors. Issues remain, such as near-wall closure, with all classes of models.

CFD-based design load analysis of 5MW offshore wind turbine

NASA Astrophysics Data System (ADS)

Tran, T. T.; Ryu, G. J.; Kim, Y. H.; Kim, D. H.

2012-11-01

The structure and aerodynamic loads acting on NREL 5MW reference wind turbine blade are calculated and analyzed based on advanced Computational Fluid Dynamics (CFD) and unsteady Blade Element Momentum (BEM). A detailed examination of the six force components has been carried out (three force components and three moment components). Structure load (gravity and inertia load) and aerodynamic load have been obtained by additional structural calculations (CFD or BEM, respectively,). In CFD method, the Reynolds Average Navier-Stokes approach was applied to solve the continuity equation of mass conservation and momentum balance so that the complex flow around wind turbines was modeled. Written in C programming language, a User Defined Function (UDF) code which defines transient velocity profile according to the Extreme Operating Gust condition was compiled into commercial FLUENT package. Furthermore, the unsteady BEM with 3D stall model has also adopted to investigate load components on wind turbine rotor. The present study introduces a comparison between advanced CFD and unsteady BEM for determining load on wind turbine rotor. Results indicate that there are good agreements between both present methods. It is importantly shown that six load components on wind turbine rotor is significant effect under Extreme Operating Gust (EOG) condition. Using advanced CFD and additional structural calculations, this study has succeeded to construct accuracy numerical methodology to estimate total load of wind turbine that compose of aerodynamic load and structure load.

Experimental and CFD-PBM Study of Oxygen Mass Transfer Coefficient in Different Impeller Configurations and Operational Conditions of a Two-Phase Partitioning Bioreactor.

PubMed

Moradkhani, Hamed; Izadkhah, Mir-Shahabeddin; Anarjan, Navideh

2017-02-01

In this work, gas dispersion in a two-phase partitioning bioreactor is analyzed by calculating volumetric oxygen mass transfer coefficient which is modeled using a commercial computational fluid dynamics (CFD), code FLUENT 6.2. Dispersed oxygen bubbles dynamics is based on standard "k-ε" Reynolds-averaged Navier-Stokes (RANS) model. This paper describes a three-dimensional CFD model coupled with population balance equations (PBE) in order to get more confirming results of experimental measurements. Values of k L a are obtained using dynamic gassing-out method. Using the CFD simulation, the volumetric mass transfer coefficient is calculated based on Higbie's penetration theory. Characteristics of mass transfer coefficient are investigated for five configurations of impeller and three different aeration flow rates. The pitched six blade type, due to the creation of downward flow direction, leads to higher dissolved oxygen (DO) concentrations, thereby, higher values of k L a compared with other impeller compositions. The magnitude of dissolved oxygen percentage in the aqueous phase has direct correlation with impeller speed and any increase of the aeration magnitude leads to faster saturation in shorter periods of time. Agitation speeds of 300 to 800 rpm are found to be the most effective rotational speeds for the mass transfer of oxygen in two-phase partitioning bioreactors (TPPB).

Convective Heat Transfer in the Reusable Solid Rocket Motor of the Space Transportation System

NASA Technical Reports Server (NTRS)

Ahmad, Rashid A.; Cash, Stephen F. (Technical Monitor)

2002-01-01

This simulation involved a two-dimensional axisymmetric model of a full motor initial grain of the Reusable Solid Rocket Motor (RSRM) of the Space Transportation System (STS). It was conducted with CFD (computational fluid dynamics) commercial code FLUENT. This analysis was performed to: a) maintain continuity with most related previous analyses, b) serve as a non-vectored baseline for any three-dimensional vectored nozzles, c) provide a relatively simple application and checkout for various CFD solution schemes, grid sensitivity studies, turbulence modeling and heat transfer, and d) calculate nozzle convective heat transfer coefficients. The accuracy of the present results and the selection of the numerical schemes and turbulence models were based on matching the rocket ballistic predictions of mass flow rate, head end pressure, vacuum thrust and specific impulse, and measured chamber pressure drop. Matching these ballistic predictions was found to be good. This study was limited to convective heat transfer and the results compared favorably with existing theory. On the other hand, qualitative comparison with backed-out data of the ratio of the convective heat transfer coefficient to the specific heat at constant pressure was made in a relative manner. This backed-out data was devised to match nozzle erosion that was a result of heat transfer (convective, radiative and conductive), chemical (transpirating), and mechanical (shear and particle impingement forces) effects combined.

Hot air impingement on a flat plate using Large Eddy Simulation (LES) technique

NASA Astrophysics Data System (ADS)

Plengsa-ard, C.; Kaewbumrung, M.

2018-01-01

Impinging hot gas jets to a flat plate generate very high heat transfer coefficients in the impingement zone. The magnitude of heat transfer prediction near the stagnation point is important and accurate heat flux distribution are needed. This research studies on heat transfer and flow field resulting from a single hot air impinging wall. The simulation is carried out using computational fluid dynamics (CFD) commercial code FLUENT. Large Eddy Simulation (LES) approach with a subgrid-scale Smagorinsky-Lilly model is present. The classical Werner-Wengle wall model is used to compute the predicted results of velocity and temperature near walls. The Smagorinsky constant in the turbulence model is set to 0.1 and is kept constant throughout the investigation. The hot gas jet impingement on the flat plate with a constant surface temperature is chosen to validate the predicted heat flux results with experimental data. The jet Reynolds number is equal to 20,000 and a fixed jet-to-plate spacing of H/D = 2.0. Nusselt number on the impingement surface is calculated. As predicted by the wall model, the instantaneous computed Nusselt number agree fairly well with experimental data. The largest values of calculated Nusselt number are near the stagnation point and decrease monotonically in the wall jet region. Also, the contour plots of instantaneous values of wall heat flux on a flat plate are captured by LES simulation.

Application of CFD in Indonesian Research: A review

NASA Astrophysics Data System (ADS)

Ambarita, H.; Siregar, M. R.; Kishinami, K.; Daimaruya, M.; Kawai, H.

2018-04-01

Computational Fluid Dynamics (CFD) is a numerical method that solves fluid flow and related governing equations using a computational tool. The studies on CFD, its methodology and its application as a research tool, are increasing. In this study, application of CFD by Indonesian researcher is briefly reviewed. The main objective is to explore the characteristics of CFD applications in Indonesian researchers. Considering the size and reputation, this study uses Scopus publications indexed data base. All of the documents in Scopus related to CFD which is affiliated by at least one of Indonesian researcher are collected to be reviewed. Research topics, CFD method, and simulation results are reviewed in brief. The results show that there are 260 documents found in literature indexed by Scopus. These documents divided into research articles 125 titles, conference paper 135 titles, book 1 title and review 1 title. In the research articles, only limited researchers focused on the development of CFD methodology. Almost all of the articles focus on using CFD in a particular application, as a research tool, such as aircraft application, wind power and heat exchanger. The topics of the 125 research articles can be divided into 12 specific applications and 1 miscellaneous application. The most popular application is Heating Ventilating and Air Conditioning and followed by Reactor, Transportation and Heat Exchanger applications. The most popular commercial CFD code used is ANSYS Fluent and only several researchers use CFX.

Study of the filtration performance of a plain wave fabric filter using response surface methodology.

PubMed

Qian, Fuping; Wang, Haigang

2010-04-15

The gas-solid two-phase flows in the plain wave fabric filter were simulated by computational fluid dynamics (CFD) technology, and the warps and wefts of the fabric filter were made of filaments with different dimensions. The numerical solutions were carried out using commercial computational fluid dynamics (CFD) code Fluent 6.1. The filtration performances of the plain wave fabric filter with different geometry parameters and operating condition, including the horizontal distance, the vertical distance and the face velocity were calculated. The effects of geometry parameters and operating condition on filtration efficiency and pressure drop were studied using response surface methodology (RSM) by means of the statistical software (Minitab V14), and two second-order polynomial models were obtained with regard to the effect of the three factors as stated above. Moreover, the models were modified by dismissing the insignificant terms. The results show that the horizontal distance, vertical distance and the face velocity all play an important role in influencing the filtration efficiency and pressure drop of the plane wave fabric filters. The horizontal distance of 3.8 times the fiber diameter, the vertical distance of 4.0 times the fiber diameter and Reynolds number of 0.98 are found to be the optimal conditions to achieve the highest filtration efficiency at the same face velocity, while maintaining an acceptable pressure drop. 2009 Elsevier B.V. All rights reserved.

Numerical simulation on pollutant dispersion from vehicle exhaust in street configurations.

PubMed

Yassin, Mohamed F; Kellnerová, R; Janour, Z

2009-09-01

The impact of the street configurations on pollutants dispersion from vehicles exhausts within urban canyons was numerically investigated using a computational fluid dynamics (CFD) model. Three-dimensional flow and dispersion of gaseous pollutants were modeled using standard kappa - epsilon turbulence model, which was numerically solved based on Reynolds-averaged Navier-Stokes equations by the commercial CFD code FLUENT. The concentration fields in the urban canyons were examined in three cases of street configurations: (1) a regular-shaped intersection, (2) a T-shaped intersection and (3) a Skew-shaped crossing intersection. Vehicle emissions were simulated as double line sources along the street. The numerical model was validated against wind tunnel results in order to optimize the turbulence model. Numerical predictions agreed reasonably well with wind tunnel results. The results obtained indicate that the mean horizontal velocity was very small in the center near the lower region of street canyon. The lowest turbulent kinetic energy was found at the separation and reattachment points associated with the corner of the down part of the upwind and downwind buildings in the street canyon. The pollutant concentration at the upwind side in the regular-shaped street intersection was higher than that in the T-shaped and Skew-shaped street intersections. Moreover, the results reveal that the street intersections are important factors to predict the flow patterns and pollutant dispersion in street canyon.

The Development of Reading and Spelling Abilities in the First 3 Years of Learning Arabic

ERIC Educational Resources Information Center

Mohamed, Wessam; Elbert, Thomas; Landerl, Karin

2011-01-01

In a cross-sectional study, we investigated the development of fluent reading and spelling in the first 3 years of learning Arabic. The goals of our study were to: (1) validate suitable measures for fluent reading and spelling in the first 3 years of learning Arabic; (2) trace the developmental course of the relationship between fluent reading and…

Parametric study of natural circulation flow in molten salt fuel in molten salt reactor

NASA Astrophysics Data System (ADS)

Pauzi, Anas Muhamad; Cioncolini, Andrea; Iacovides, Hector

2015-04-01

The Molten Salt Reactor (MSR) is one of the most promising system proposed by Generation IV Forum (GIF) for future nuclear reactor systems. Advantages of the MSR are significantly larger compared to other reactor system, and is mainly achieved from its liquid nature of fuel and coolant. Further improvement to this system, which is a natural circulating molten fuel salt inside its tube in the reactor core is proposed, to achieve advantages of reducing and simplifying the MSR design proposed by GIF. Thermal hydraulic analysis on the proposed system was completed using a commercial computation fluid dynamics (CFD) software called FLUENT by ANSYS Inc. An understanding on theory behind this unique natural circulation flow inside the tube caused by fission heat generated in molten fuel salt and tube cooling was briefly introduced. Currently, no commercial CFD software could perfectly simulate natural circulation flow, hence, modeling this flow problem in FLUENT is introduced and analyzed to obtain best simulation results. Results obtained demonstrate the existence of periodical transient nature of flow problem, hence improvements in tube design is proposed based on the analysis on temperature and velocity profile. Results show that the proposed system could operate at up to 750MW core power, given that turbulence are enhanced throughout flow region, and precise molten fuel salt physical properties could be defined. At the request of the authors and the Proceedings Editor the name of the co-author Andrea Cioncolini was corrected from Andrea Coincolini. The same name correction was made in the Acknowledgement section on page 030004-10 and in reference number 4. The updated article was published on 11 May 2015.

Transcoding method from H.264/AVC to high efficiency video coding based on similarity of intraprediction, interprediction, and motion vector

NASA Astrophysics Data System (ADS)

Liu, Mei-Feng; Zhong, Guo-Yun; He, Xiao-Hai; Qing, Lin-Bo

2016-09-01

Currently, most video resources on line are encoded in the H.264/AVC format. More fluent video transmission can be obtained if these resources are encoded in the newest international video coding standard: high efficiency video coding (HEVC). In order to improve the video transmission and storage on line, a transcoding method from H.264/AVC to HEVC is proposed. In this transcoding algorithm, the coding information of intraprediction, interprediction, and motion vector (MV) in H.264/AVC video stream are used to accelerate the coding in HEVC. It is found through experiments that the region of interprediction in HEVC overlaps that in H.264/AVC. Therefore, the intraprediction for the region in HEVC, which is interpredicted in H.264/AVC, can be skipped to reduce coding complexity. Several macroblocks in H.264/AVC are combined into one PU in HEVC when the MV difference between two of the macroblocks in H.264/AVC is lower than a threshold. This method selects only one coding unit depth and one prediction unit (PU) mode to reduce the coding complexity. An MV interpolation method of combined PU in HEVC is proposed according to the areas and distances between the center of one macroblock in H.264/AVC and that of the PU in HEVC. The predicted MV accelerates the motion estimation for HEVC coding. The simulation results show that our proposed algorithm achieves significant coding time reduction with a little loss in bitrates distortion rate, compared to the existing transcoding algorithms and normal HEVC coding.

New approach to reducing water consumption in commercial kitchen hood

NASA Astrophysics Data System (ADS)

Asmuin, N.; Pairan, M. R.

2017-09-01

Water mist sprays are used in wide range of application. However it is depend to the spray characteristic to suit the particular application. The modern commercial kitchen hood ventilation system was adopted with the water mist nozzle technology as an additional tool to increase the filtration efficiency. However, low level of filtration effectiveness and high water consumption were the major problems among the Commercial Kitchen Ventilation expert. Therefore, this study aims to develop a new mist spray technology to replacing the conventional KSJB nozzle (KSJB is a nozzle’s name). At the same time, an appropriate recommended location to install the nozzle in kitchen hood system was suggested. An extensive simulation works were carried out to observe the spray characteristics, ANSYS (FLUENT) was used for simulation wise. In the case of nozzle studies, nozzles were tested at 1 bar pressure of water and air. In comparison with conventional nozzles configuration, this new approach suggested nozzle configuration was reduce up to 50% of water consumption, which by adopted 3 numbers of nozzles instead of 6 numbers of nozzles in the commercial kitchen hood system. Therefore, this nozzle will be used in industry for their benefits of water consumption, filtration efficiency and reduced the safety limitations.

Female Autism Phenotypes Investigated at Different Levels of Language and Developmental Abilities.

PubMed

Howe, Yamini J; O'Rourke, Julia A; Yatchmink, Yvette; Viscidi, Emma W; Jones, Richard N; Morrow, Eric M

2015-11-01

This study investigated the differences in clinical symptoms between females and males with autism spectrum disorder (ASD) across three verbal ability groups (nonverbal, phrase and fluent speech), based on which Autism Diagnostic Observation Schedule module was administered to 5723 individuals in four research datasets. In the Simons Simplex Collection and Autism Treatment Network, females with ASD and phrase or fluent speech had lower cognitive, adaptive, and social abilities than males. In the Autism Genetics Resource Exchange and the Autism Consortium, females with phrase or fluent speech had similar or better adaptive and social abilities than males. Females who were nonverbal had similar cognitive, adaptive, and social abilities as males. Population-based longitudinal studies of verbally fluent females with ASD are needed.

Modeling and testing of fast response, fiber-optic temperature sensors

NASA Astrophysics Data System (ADS)

Tonks, Michael James

The objective of this work was to design, analyze and test a fast response fiber-optic temperature probe and sensor. The sensor is intended for measuring rapid temperature changes such as produced by a blast wave formed by a detonation. This work was performed in coordination with Luna Innovations Incorporated, and the design is based on extensions of an existing fiber-optic temperature sensor developed by Luna. The sensor consists of a glass fiber with an optical wafer attached to the tip. A basic description of the principles behind the fiber-optic temperature sensor and an accompanying demodulation system is provided. For experimental validation tests, shock tubes were used to simulate the blast wave experienced at a distance of 3.0 m from the detonation of 22.7 kg of TNT. The flow conditions were predicted using idealized shock tube theory. The temperature sensors were tested in three configurations, flush at the end of the shock tube, extended on a probe 2.54 cm into the flow and extended on a probe 12.7 cm into the flow. The total temperature was expected to change from 300 K to 1130 K for the flush wall experiments and from 300 K to 960 K for the probe experiments. During the initial 0.1 milliseconds of the data the temperature only changed 8 K when the sensors were flush in the end of the shock tube. The sensor temperature changed 36 K during the same time when mounted on a probe in the flow. Schlieren pictures were taken of the flow in the shock tube to further understand the shock tube environment. Contrary to ideal shock tube theory, it was discovered that the flow did not remain stagnant in the end of the shock tube after the shock reflects from the end of the shock tube. Instead, the effects of turbulence were recorded with the fiber-optic sensors, and this turbulence was also captured in the schlieren photographs. A fast-response thermocouple was used to collect data for comparison with the fiber-optic sensor, and the fiber-optic sensor was proven to have a faster response time compared to the thermocouple. When the sensors were extended 12.7 cm into the flow, the fiber-optic sensors recorded a temperature change of 143 K compared to 38 K recorded by the thermocouple during the 0.5 millisecond test. This corresponds to 22% of the change of total temperature in the air recorded by the fiber-optic sensor and only 6% recorded by the thermocouple. Put another way, the fiber-optic sensor experience a rate of temperature change equal to 2.9x105 K/s and the thermocouple changed at a rate of 0.79x105 K/s. The data recorded from the fiber-optic sensor also contained much less noise than the thermocouple data. An unsteady finite element thermal model was created using ANSYS to predict the temperature response of the sensor. Test cases with known analytical solutions were used to verify the ANSYS modeling procedures. The shock tube flow environment was also modeled with Fluent, a commercially available CFD code. Fluent was used to determine the heat transfer between the shock tube flow and the sensor. The convection film coefficient for the flow was predicted by Fluent to be 27,150 W/m2K for the front of the wafer and 13,385 W/m2K for the side. The Fluent results were used with the ANSYS model to predict the response of the fiber-optic sensor when exposed to the shock tube flow. The results from the Fluent/ANSYS model were compared to the fiber-optic measurements taken in the shock tube. It was seen that the heat flux to the sensor was slightly over-predicted by the model, and the heat losses from the wafer were also over-predicted. Since the prediction fell within the uncertainty of the measurement, it was found to be in good agreement with the measured values. (Abstract shortened by UMI.)

Does Print Size Matter for Reading? A Review of Findings from Vision Science and Typography

PubMed Central

Legge, Gordon E.; Bigelow, Charles A.

2012-01-01

The size and shape of printed symbols determine the legibility of text. In this paper we focus on print size because of its crucial role in understanding reading performance and its significance in the history and contemporary practice of typography. We present evidence supporting the hypothesis that the distribution of print sizes in historical and contemporary publications falls within the psychophysically defined range of fluent print size — the range over which text can be read at maximum speed. The fluent range extends over a factor of 10 in angular print size (x-height) from approximately 0.2° to 2°. Assuming a standard reading distance of 40 cm (16 inches), the corresponding physical x-heights are 1.4 mm (4 points) and 14 mm (40 points). We provide new data on the distributions of print sizes in published books and newspapers and in type founders' specimens, and consider factors influencing these distributions. We discuss theoretical concepts from vision science concerning visual size coding that help inform our understanding of historical and modern typographical practices. While economic, social, technological and artistic factors influence type design and selection, we conclude that properties of human visual processing play a dominant role in constraining the distribution of print sizes in common use. PMID:21828237

Does print size matter for reading? A review of findings from vision science and typography.

PubMed

Legge, Gordon E; Bigelow, Charles A

2011-08-09

The size and shape of printed symbols determine the legibility of text. In this paper, we focus on print size because of its crucial role in understanding reading performance and its significance in the history and contemporary practice of typography. We present evidence supporting the hypothesis that the distribution of print sizes in historical and contemporary publications falls within the psychophysically defined range of fluent print size--the range over which text can be read at maximum speed. The fluent range extends over a factor of 10 in angular print size (x-height) from approximately 0.2° to 2°. Assuming a standard reading distance of 40 cm (16 inches), the corresponding physical x-heights are 1.4 mm (4 points) and 14 mm (40 points). We provide new data on the distributions of print sizes in published books and newspapers and in typefounders' specimens, and consider factors influencing these distributions. We discuss theoretical concepts from vision science concerning visual size coding that help inform our understanding of historical and modern typographical practices. While economic, social, technological, and artistic factors influence type design and selection, we conclude that properties of human visual processing play a dominant role in constraining the distribution of print sizes in common use.

Development of a %22solar patch%22 calculator to evaluate heliostat-field irradiance as a boundary condition in CFD models.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khalsa, Siri Sahib; Ho, Clifford Kuofei

2010-04-01

A rigorous computational fluid dynamics (CFD) approach to calculating temperature distributions, radiative and convective losses, and flow fields in a cavity receiver irradiated by a heliostat field is typically limited to the receiver domain alone for computational reasons. A CFD simulation cannot realistically yield a precise solution that includes the details within the vast domain of an entire heliostat field in addition to the detailed processes and features within a cavity receiver. Instead, the incoming field irradiance can be represented as a boundary condition on the receiver domain. This paper describes a program, the Solar Patch Calculator, written in Microsoftmore » Excel VBA to characterize multiple beams emanating from a 'solar patch' located at the aperture of a cavity receiver, in order to represent the incoming irradiance from any field of heliostats as a boundary condition on the receiver domain. This program accounts for cosine losses; receiver location; heliostat reflectivity, areas and locations; field location; time of day and day of year. This paper also describes the implementation of the boundary conditions calculated by this program into a Discrete Ordinates radiation model using Ansys{reg_sign} FLUENT (www.fluent.com), and compares the results to experimental data and to results generated by the code DELSOL.« less

Development of a %22Solar Patch%22 calculator to evaluate heliostat-field irradiance as a boundary condition in CFD models.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khalsa, Siri Sahib S.; Ho, Clifford Kuofei

2010-05-01

A rigorous computational fluid dynamics (CFD) approach to calculating temperature distributions, radiative and convective losses, and flow fields in a cavity receiver irradiated by a heliostat field is typically limited to the receiver domain alone for computational reasons. A CFD simulation cannot realistically yield a precise solution that includes the details within the vast domain of an entire heliostat field in addition to the detailed processes and features within a cavity receiver. Instead, the incoming field irradiance can be represented as a boundary condition on the receiver domain. This paper describes a program, the Solar Patch Calculator, written in Microsoftmore » Excel VBA to characterize multiple beams emanating from a 'solar patch' located at the aperture of a cavity receiver, in order to represent the incoming irradiance from any field of heliostats as a boundary condition on the receiver domain. This program accounts for cosine losses; receiver location; heliostat reflectivity, areas and locations; field location; time of day and day of year. This paper also describes the implementation of the boundary conditions calculated by this program into a Discrete Ordinates radiation model using Ansys{reg_sign} FLUENT (www.fluent.com), and compares the results to experimental data and to results generated by the code DELSOL.« less

Development of Flow over Blunt-Nosed Slender Bodies at Transonic Mach Numbers

NASA Astrophysics Data System (ADS)

Yanamashetti, Gireesh; Suryanarayana, G. K.; Mukherjee, Rinku

2017-04-01

Comparisons of the development of flow over a cylinder with a 20° cone nose and a cylinder with an ogive nose, which represent typical heat-shield configurations are studied using CFD and experiments at transonic Mach numbers. The Cp plots are studied to locate expansion or separation. Experiments are carried out at M = 0.8, 0.9, 0.95 and 1.1 and Re ≈ 2.45 × 106. Computations are carried out using the commercial package, FLUENT 6.3. Inadequate spatial resolution of pressure ports in experiments as well as limitations of the CFD tool result in some differences in experimental and CFD results.

Wind conditions in urban layout - Numerical and experimental research

NASA Astrophysics Data System (ADS)

Poćwierz, Marta; Zielonko-Jung, Katarzyna

2018-01-01

This paper presents research which compares the numerical and the experimental results for different cases of airflow around a few urban layouts. The study is concerned mostly with the analysis of parameters, such as pressure and velocity fields, which are essential in the building industry. Numerical simulations have been performed by the commercial software Fluent, with the use of a few different turbulence models, including popular k-ɛ, k-ɛ realizable or k-ω. A particular attention has been paid to accurate description of the conditions on the inlet and the selection of suitable computing grid. The pressure measurement near buildings and oil visualization were undertaken and described accordingly.

Membrane-based actuation for high-speed single molecule force spectroscopy studies using AFM.

PubMed

Sarangapani, Krishna; Torun, Hamdi; Finkler, Ofer; Zhu, Cheng; Degertekin, Levent

2010-07-01

Atomic force microscopy (AFM)-based dynamic force spectroscopy of single molecular interactions involves characterizing unbinding/unfolding force distributions over a range of pulling speeds. Owing to their size and stiffness, AFM cantilevers are adversely affected by hydrodynamic forces, especially at pulling speeds >10 microm/s, when the viscous drag becomes comparable to the unbinding/unfolding forces. To circumvent these adverse effects, we have fabricated polymer-based membranes capable of actuating commercial AFM cantilevers at speeds >or=100 microm/s with minimal viscous drag effects. We have used FLUENT, a computational fluid dynamics (CFD) software, to simulate high-speed pulling and fast actuation of AFM cantilevers and membranes in different experimental configurations. The simulation results support the experimental findings on a variety of commercial AFM cantilevers and predict significant reduction in drag forces when membrane actuators are used. Unbinding force experiments involving human antibodies using these membranes demonstrate that it is possible to achieve bond loading rates >or=10(6) pN/s, an order of magnitude greater than that reported with commercial AFM cantilevers and systems.

Transitional hemodynamics in intracranial aneurysms - Comparative velocity investigations with high resolution lattice Boltzmann simulations, normal resolution ANSYS simulations, and MR imaging.

PubMed

Jain, Kartik; Jiang, Jingfeng; Strother, Charles; Mardal, Kent-André

2016-11-01

Blood flow in intracranial aneurysms has, until recently, been considered to be disturbed but still laminar. Recent high resolution computational studies have demonstrated, in some situations, however, that the flow may exhibit high frequency fluctuations that resemble weakly turbulent or transitional flow. Due to numerous assumptions required for simplification in computational fluid dynamics (CFD) studies, the occurrence of these events, in vivo, remains unsettled. The detection of these fluctuations in aneurysmal blood flow, i.e., hemodynamics by CFD, poses additional challenges as such phenomena cannot be captured in clinical data acquisition with magnetic resonance (MR) due to inadequate temporal and spatial resolutions. The authors' purpose was to address this issue by comparing results from highly resolved simulations, conventional resolution laminar simulations, and MR measurements, identify the differences, and identify their causes. Two aneurysms in the basilar artery, one with disturbed yet laminar flow and the other with transitional flow, were chosen. One set of highly resolved direct numerical simulations using the lattice Boltzmann method (LBM) and another with adequate resolutions under laminar flow assumption were conducted using a commercially available ANSYS Fluent solver. The velocity fields obtained from simulation results were qualitatively and statistically compared against each other and with MR acquisition. Results from LBM, ANSYS Fluent, and MR agree well qualitatively and quantitatively for one of the aneurysms with laminar flow in which fluctuations were <80 Hz. The comparisons for the second aneurysm with high fluctuations of > ∼ 600 Hz showed vivid differences between LBM, ANSYS Fluent, and magnetic resonance imaging. After ensemble averaging and down-sampling to coarser space and time scales, these differences became minimal. A combination of MR derived data and CFD can be helpful in estimating the hemodynamic environment of intracranial aneurysms. Adequately resolved CFD would suffice gross assessment of hemodynamics, potentially in a clinical setting, and highly resolved CFD could be helpful in a detailed and retrospective understanding of the physiological mechanisms.

Preliteracy signatures of poor-reading abilities in resting-state EEG

PubMed Central

Schiavone, Giuseppina; Linkenkaer-Hansen, Klaus; Maurits, Natasha M.; Plakas, Anna; Maassen, Ben A. M.; Mansvelder, Huibert D.; van der Leij, Aryan; van Zuijen, Titia L.

2014-01-01

The hereditary character of dyslexia suggests the presence of putative underlying neural anomalies already in preliterate age. Here, we investigated whether early neurophysiological correlates of future reading difficulties—a hallmark of dyslexia—could be identified in the resting-state EEG of preliterate children. The children in this study were recruited at birth and classified on the basis of parents' performance on reading tests to be at-risk of becoming poor readers (n = 48) or not (n = 14). Eyes-open rest EEG was measured at the age of 3 years, and the at-risk children were divided into fluent readers (n = 24) and non-fluent readers (n = 24) after reading assessment at their third grade of school. We found that fluent readers and non-fluent readers differed in normalized spectral amplitude. Non-fluent readers were characterized by lower amplitude in the delta-1 frequency band (0.5–2 Hz) and higher amplitude in the alpha-1 band (6–8 Hz) in multiple scalp regions compared to control and at-risk fluent readers. Interestingly, across groups these EEG biomarkers correlated with several behavioral test scores measured in the third grade. Specifically, the performance on reading fluency, phonological and orthographic tasks and rapid automatized naming task correlated positively with delta-1 and negatively with alpha-1. Together, our results suggest that combining family-risk status, neurophysiological testing and behavioral test scores in a longitudinal setting may help uncover physiological mechanisms implicated with neurodevelopmental disorders such as the predisposition to reading disabilities. PMID:25285075

Effects of word frequency and phonological neighborhood characteristics on confrontation naming in children who stutter and normally fluent peers.

PubMed

Ratner, Nan Bernstein; Newman, Rochelle; Strekas, Amy

2009-12-01

In a prior study (Newman & Bernstein Ratner, 2007), we examined the effects of word frequency and phonological neighborhood characteristics on confrontation naming latency, accuracy and fluency in adults who stutter and typically fluent speakers. A small difference in accuracy favoring fluent adults was noted, but no other patterns differentiated fluent speaker responses from those obtained from the adults who stutter. Because lexical organization or retrieval differences might be more easily observed in less mature language users, we replicated the experiment using 15 children who stutter (ages 4;10 16;2) and age- and gender-matched peers. Results replicated the earlier study: the two groups of participants showed strikingly similar patterns of responses based on word frequency and neighborhood characteristics. There were also no differences in naming accuracy overall between the two groups. Given our results and those of other researchers who have explored the impact of neighborhood variables on lexical retrieval in people who stutter, we suggest that differences between language production in PWS and fluent speakers are not likely to involve atypical phonological organization of lexical neighborhoods. After reading this article, the reader will be able to: (1) define and illustrate words that have differing frequency and phonological neighborhood characteristics; (2) evaluate whether or not children who stutter appear to organize their mental lexicons differently than those of children who are typically fluent; (3) suggest future areas of research into language processing in people who stutter.

The Contract Management Body of Knowledge: A Comparison of Contracting Competencies

DTIC Science & Technology

2013-12-01

SME subject matter expert SOW statement of work TINA Truth in Negotiations Act UCC uniform commercial code WBS work breakdown structure xv...documents whose terms and condition are legally enforceable. Sources of law and guidance covered include the uniform commercial code ( UCC ), Federal...contracting including the uniform commercial code ( UCC ), Federal Acquisition Regulation (FAR), as well as various other laws pertaining to both

Amelioration du design et prediction des vitesses moyennes de sortie de buses a jet coherent pour les procedes de rectification a l'aide de la CFD

NASA Astrophysics Data System (ADS)

St-Pierre, Benoit

In order to produce more efficient jet engines, manufacturers add compressor stages to their new engines and their manufacturing departments must increase their productivity while reducing their costs of operation. The addition of these compressor stages causes an increase in the pressures and temperatures for those components. To address this issue, the engineering departments use highly thermal resistant alloys for their manufacturing, mostly nickel alloys. However, these alloys are very difficult to machine by conventional manufacturing processes. Thus, in order to efficiently machine these alloys, grinding processes, like Continuous Dress Creep Feed (CDCF), are always the best choices. However, the productivity of these processes is mainly limited by the burning marks that may appear on the machined surfaces if too aggressive cutting parameters are selected. A simple solution to this issue consists in improving the design of the existing coherent coolant nozzle so that they can produce an even more coherent coolant jet. Therefore, this research project proposes a method which makes it possible to predict the jet coherency of a given nozzle while also giving the possibility to optimize its design in order to improve its jet coherency and all that while using a commercial CFD software, i.e. FLUENT 6.3. Thus, the proposed method is based on the evolution of the velocity profile provided by FLUENT for a given Webster type nozzle and on the experimental measurement of jet coherency of this one in order to establish a semi-empirical model that links these two results. So, for a given nozzle it is possible to precisely predict the physical opening of the coolant jet that this one will produce by using the opening of the velocity profile provided by FLUENT and the semiempirical model developed in this research. The use of FLUENT fonctions also made it possible to simulate the fluid flow inside the coolant nozzle and to identify the cavitation zones within it in order to decrease its importance by modifying the inside profile geometry. This new design of coolant nozzle is more able to produce a coherent jet as compared to the Webster type design. Moreover, this was verified using the semi-empirical model developed in this research and then validated through experimental tests. Finally, cutting tests were performed to compare Webster type nozzle against the newly proposed coolant nozzle design. The results obtained show that the new concept of coolant nozzle gives an improvement in wheel life of more than 15% while slightly decreasing the power required for a cut and that's while preserving a similar surface finish. Finally, a comparative study between FLUENT and Bernoulli equations for the prediction of the mean velocity at the nozzle exit is carried out. This comparison shows that neglecting the effect of turbulence and cavitations on the coolant flow greatly influences the mean velocity at the nozzle exit.

Analysis of SMA Hybrid Composite Structures using Commercial Codes

NASA Technical Reports Server (NTRS)

Turner, Travis L.; Patel, Hemant D.

2004-01-01

A thermomechanical model for shape memory alloy (SMA) actuators and SMA hybrid composite (SMAHC) structures has been recently implemented in the commercial finite element codes MSC.Nastran and ABAQUS. The model may be easily implemented in any code that has the capability for analysis of laminated composite structures with temperature dependent material properties. The model is also relatively easy to use and requires input of only fundamental engineering properties. A brief description of the model is presented, followed by discussion of implementation and usage in the commercial codes. Results are presented from static and dynamic analysis of SMAHC beams of two types; a beam clamped at each end and a cantilevered beam. Nonlinear static (post-buckling) and random response analyses are demonstrated for the first specimen. Static deflection (shape) control is demonstrated for the cantilevered beam. Approaches for modeling SMAHC material systems with embedded SMA in ribbon and small round wire product forms are demonstrated and compared. The results from the commercial codes are compared to those from a research code as validation of the commercial implementations; excellent correlation is achieved in all cases.

Computational fluid dynamics analysis of cyclist aerodynamics: performance of different turbulence-modelling and boundary-layer modelling approaches.

PubMed

Defraeye, Thijs; Blocken, Bert; Koninckx, Erwin; Hespel, Peter; Carmeliet, Jan

2010-08-26

This study aims at assessing the accuracy of computational fluid dynamics (CFD) for applications in sports aerodynamics, for example for drag predictions of swimmers, cyclists or skiers, by evaluating the applied numerical modelling techniques by means of detailed validation experiments. In this study, a wind-tunnel experiment on a scale model of a cyclist (scale 1:2) is presented. Apart from three-component forces and moments, also high-resolution surface pressure measurements on the scale model's surface, i.e. at 115 locations, are performed to provide detailed information on the flow field. These data are used to compare the performance of different turbulence-modelling techniques, such as steady Reynolds-averaged Navier-Stokes (RANS), with several k-epsilon and k-omega turbulence models, and unsteady large-eddy simulation (LES), and also boundary-layer modelling techniques, namely wall functions and low-Reynolds number modelling (LRNM). The commercial CFD code Fluent 6.3 is used for the simulations. The RANS shear-stress transport (SST) k-omega model shows the best overall performance, followed by the more computationally expensive LES. Furthermore, LRNM is clearly preferred over wall functions to model the boundary layer. This study showed that there are more accurate alternatives for evaluating flow around bluff bodies with CFD than the standard k-epsilon model combined with wall functions, which is often used in CFD studies in sports. 2010 Elsevier Ltd. All rights reserved.

High-temperature solar receiver integrated with a short-term storage system

NASA Astrophysics Data System (ADS)

Giovannelli, Ambra; Bashir, Muhammad Anser; Archilei, Erika Maria

2017-06-01

Small-Scale Concentrated Solar Power Plants could have a potential market for off-grid applications in rural contexts with limited access to the electrical grid and favorable environmental characteristics. Some Small-Scale plants have already been developed, like the 25-30 kWe Dish-Stirling engine. Other ones are under development as, for example, plants based on Parabolic Trough Collectors coupled with Organic Rankine Cycles. Furthermore, the technological progress achieved in the development of new small high-temperature solar receiver, makes possible the development of interesting systems based on Micro Gas Turbines coupled with Dish collectors. Such systems could have several advantages in terms of costs, reliability and availability if compared with Dish-Stirling plants. In addition, Dish-Micro Gas Turbine systems are expected to have higher performance than Solar Organic Rankine Cycle plants. The present work focuses the attention on some challenging aspects related to the design of small high-temperature solar receivers for Dish-Micro Gas Turbine systems. Natural fluctuations in the solar radiation can reduce system performance and damage seriously the Micro Gas Turbine. To stabilize the system operation, the solar receiver has to assure a proper thermal inertia. Therefore, a solar receiver integrated with a short-term storage system based on high-temperature phase-change materials is proposed in this paper. Steady-state and transient analyses (for thermal storage charge and discharge phases) have been carried out using the commercial CFD code Ansys-Fluent. Results are presented and discussed.

When will a stuttering moment occur? The determining role of speech motor preparation.

PubMed

Vanhoutte, Sarah; Cosyns, Marjan; van Mierlo, Pieter; Batens, Katja; Corthals, Paul; De Letter, Miet; Van Borsel, John; Santens, Patrick

2016-06-01

The present study aimed to evaluate whether increased activity related to speech motor preparation preceding fluently produced words reflects a successful compensation strategy in stuttering. For this purpose, a contingent negative variation (CNV) was evoked during a picture naming task and measured by use of electro-encephalography. A CNV is a slow, negative event-related potential known to reflect motor preparation generated by the basal ganglia-thalamo-cortical (BGTC) - loop. In a previous analysis, the CNV of 25 adults with developmental stuttering (AWS) was significantly increased, especially over the right hemisphere, compared to the CNV of 35 fluent speakers (FS) when both groups were speaking fluently (Vanhoutte et al., (2015) doi: 10.1016/j.neuropsychologia.2015.05.013). To elucidate whether this increase is a compensation strategy enabling fluent speech in AWS, the present analysis evaluated the CNV of 7 AWS who stuttered during this picture naming task. The CNV preceding AWS stuttered words was statistically compared to the CNV preceding AWS fluent words and FS fluent words. Though no difference emerged between the CNV of the AWS stuttered words and the FS fluent words, a significant reduction was observed when comparing the CNV preceding AWS stuttered words to the CNV preceding AWS fluent words. The latter seems to confirm the compensation hypothesis: the increased CNV prior to AWS fluent words is a successful compensation strategy, especially when it occurs over the right hemisphere. The words are produced fluently because of an enlarged activity during speech motor preparation. The left CNV preceding AWS stuttered words correlated negatively with stuttering frequency and severity suggestive for a link between the left BGTC - network and the stuttering pathology. Overall, speech motor preparatory activity generated by the BGTC - loop seems to have a determining role in stuttering. An important divergence between left and right hemisphere is hypothesized. Copyright © 2016 Elsevier Ltd. All rights reserved.

Non-fluent speech following stroke is caused by impaired efference copy.

PubMed

Feenaughty, Lynda; Basilakos, Alexandra; Bonilha, Leonardo; den Ouden, Dirk-Bart; Rorden, Chris; Stark, Brielle; Fridriksson, Julius

2017-09-01

Efference copy is a cognitive mechanism argued to be critical for initiating and monitoring speech: however, the extent to which breakdown of efference copy mechanisms impact speech production is unclear. This study examined the best mechanistic predictors of non-fluent speech among 88 stroke survivors. Objective speech fluency measures were subjected to a principal component analysis (PCA). The primary PCA factor was then entered into a multiple stepwise linear regression analysis as the dependent variable, with a set of independent mechanistic variables. Participants' ability to mimic audio-visual speech ("speech entrainment response") was the best independent predictor of non-fluent speech. We suggest that this "speech entrainment" factor reflects integrity of internal monitoring (i.e., efference copy) of speech production, which affects speech initiation and maintenance. Results support models of normal speech production and suggest that therapy focused on speech initiation and maintenance may improve speech fluency for individuals with chronic non-fluent aphasia post stroke.

Three-dimensional simulation of beam propagation and heat transfer in static gas Cs DPALs using wave optics and fluid dynamics models

NASA Astrophysics Data System (ADS)

Waichman, Karol; Barmashenko, Boris D.; Rosenwaks, Salman

2017-10-01

Analysis of beam propagation, kinetic and fluid dynamic processes in Cs diode pumped alkali lasers (DPALs), using wave optics model and gasdynamic code, is reported. The analysis is based on a three-dimensional, time-dependent computational fluid dynamics (3D CFD) model. The Navier-Stokes equations for momentum, heat and mass transfer are solved by a commercial Ansys FLUENT solver based on the finite volume discretization technique. The CFD code which solves the gas conservation equations includes effects of natural convection and temperature diffusion of the species in the DPAL mixture. The DPAL kinetic processes in the Cs/He/C2H6 gas mixture dealt with in this paper involve the three lowest energy levels of Cs, (1) 62S1/2, (2) 62P1/2 and (3) 62P3/2. The kinetic processes include absorption due to the 1->3 D2 transition followed by relaxation the 3 to 2 fine structure levels and stimulated emission due to the 2->1 D1 transition. Collisional quenching of levels 2 and 3 and spontaneous emission from these levels are also considered. The gas flow conservation equations are coupled to fast-Fourier-transform algorithm for transverse mode propagation to obtain a solution of the scalar paraxial propagation equation for the laser beam. The wave propagation equation is solved by the split-step beam propagation method where the gain and refractive index in the DPAL medium affect the wave amplitude and phase. Using the CFD and beam propagation models, the gas flow pattern and spatial distributions of the pump and laser intensities in the resonator were calculated for end-pumped Cs DPAL. The laser power, DPAL medium temperature and the laser beam quality were calculated as a function of pump power. The results of the theoretical model for laser power were compared to experimental results of Cs DPAL.

Knowledge of and attitude towards road traffic codes among commercial motorcycle riders in Anambra State.

PubMed

Adogu, O U; Ilika, A L

2006-12-01

Road traffic accidents (rtas) represent a major epidemic of non communicable disease in the country and has since escalated with the introduction of the new phenomenon of commercial motorcycle transportation such as is found in the two urban towns of nnewi and Awka of Anambra state, Nigeria. making use of a pre-tested, semi structured, interviewer administered questionnaire, relevant data on socio demographic and motorcycle characteristics were collected from a sample of commercial motorcyclists selected by systematic sampling technique. their knowledge of and attitude towards road traffic and safety codes were elicited. The result showed that the all-male commercial motorcyclists had a mean age of 30+8.9 years. one hundred and seventy six (32.6%) possessed good knowledge of road traffic codes and safety, while 35 (6.5%) exhibited good attitude towards them. both knowledge of and attitude towards traffic codes and safety improved with increase in educational level (p<0.005, p<0.001 respectively). the younger motorcyclists also possessed statistically significant better knowledge of traffic codes than their older counterparts (p<0.025). attitude to traffic codes and safety had no association with age of the motorcyclists (p>0.25). the study has provided useful information on the knowledge of and attitude towards road traffic and safety codes among commercial motorcyclists in nigeria. pursuit of knowledge through formal and informal education should run pari pasu with efforts to improve the nigerian economy in order to ensure a sustainable positive attitudinal change towards road traffic codes and safety among commercial motorcyclists.

Convection and chemistry effects in CVD: A 3-D analysis for silicon deposition

NASA Technical Reports Server (NTRS)

Gokoglu, S. A.; Kuczmarski, M. A.; Tsui, P.; Chait, A.

1989-01-01

The computational fluid dynamics code FLUENT has been adopted to simulate the entire rectangular-channel-like (3-D) geometry of an experimental CVD reactor designed for Si deposition. The code incorporated the effects of both homogeneous (gas phase) and heterogeneous (surface) chemistry with finite reaction rates of important species existing in silane dissociation. The experiments were designed to elucidate the effects of gravitationally-induced buoyancy-driven convection flows on the quality of the grown Si films. This goal is accomplished by contrasting the results obtained from a carrier gas mixture of H2/Ar with the ones obtained from the same molar mixture ratio of H2/He, without any accompanying change in the chemistry. Computationally, these cases are simulated in the terrestrial gravitational field and in the absence of gravity. The numerical results compare favorably with experiments. Powerful computational tools provide invaluable insights into the complex physicochemical phenomena taking place in CVD reactors. Such information is essential for the improved design and optimization of future CVD reactors.

Coupled modeling of a directly heated tubular solar receiver for supercritical carbon dioxide Brayton cycle: Optical and thermal-fluid evaluation

DOE PAGES

Ortega, Jesus; Khivsara, Sagar; Christian, Joshua; ...

2016-05-30

In single phase performance and appealing thermo-physical properties supercritical carbon dioxide (s-CO 2) make a good heat transfer fluid candidate for concentrating solar power (CSP) technologies. The development of a solar receiver capable of delivering s-CO 2 at outlet temperatures ~973 K is required in order to merge CSP and s-CO 2 Brayton cycle technologies. A coupled optical and thermal-fluid modeling effort for a tubular receiver is undertaken to evaluate the direct tubular s-CO 2 receiver’s thermal performance when exposed to a concentrated solar power input of ~0.3–0.5 MW. Ray tracing, using SolTrace, is performed to determine the heat fluxmore » profiles on the receiver and computational fluid dynamics (CFD) determines the thermal performance of the receiver under the specified heating conditions. Moreover, an in-house MATLAB code is developed to couple SolTrace and ANSYS Fluent. CFD modeling is performed using ANSYS Fluent to predict the thermal performance of the receiver by evaluating radiation and convection heat loss mechanisms. Understanding the effects of variation in heliostat aiming strategy and flow configurations on the thermal performance of the receiver was achieved through parametric analyses. Finally, a receiver thermal efficiency ~85% was predicted and the surface temperatures were observed to be within the allowable limit for the materials under consideration.« less

Coupled modeling of a directly heated tubular solar receiver for supercritical carbon dioxide Brayton cycle: Optical and thermal-fluid evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ortega, Jesus; Khivsara, Sagar; Christian, Joshua

In single phase performance and appealing thermo-physical properties supercritical carbon dioxide (s-CO 2) make a good heat transfer fluid candidate for concentrating solar power (CSP) technologies. The development of a solar receiver capable of delivering s-CO 2 at outlet temperatures ~973 K is required in order to merge CSP and s-CO 2 Brayton cycle technologies. A coupled optical and thermal-fluid modeling effort for a tubular receiver is undertaken to evaluate the direct tubular s-CO 2 receiver’s thermal performance when exposed to a concentrated solar power input of ~0.3–0.5 MW. Ray tracing, using SolTrace, is performed to determine the heat fluxmore » profiles on the receiver and computational fluid dynamics (CFD) determines the thermal performance of the receiver under the specified heating conditions. Moreover, an in-house MATLAB code is developed to couple SolTrace and ANSYS Fluent. CFD modeling is performed using ANSYS Fluent to predict the thermal performance of the receiver by evaluating radiation and convection heat loss mechanisms. Understanding the effects of variation in heliostat aiming strategy and flow configurations on the thermal performance of the receiver was achieved through parametric analyses. Finally, a receiver thermal efficiency ~85% was predicted and the surface temperatures were observed to be within the allowable limit for the materials under consideration.« less

Simulation numerique de l'accretion de glace sur une pale d'eolienne

NASA Astrophysics Data System (ADS)

Fernando, Villalpando

The wind energy industry is growing steadily, and an excellent place for the construction of wind farms is northern Quebec. This region has huge wind energy production potential, as the cold temperatures increase air density and with it the available wind energy. However, some issues associated with arctic climates cause production losses on wind farms. Icing conditions occur frequently, as high air humidity and freezing temperatures cause ice to build up on the blades, resulting in wind turbines operating suboptimally. One of the negative consequences of ice accretion is degradation of the blade's aerodynamics, in the form of a decrease in lift and an increase in drag. Also, the ice grows unevenly, which unbalances the blades and induces vibration. This reduces the expected life of some of the turbine components. If the ice accretion continues, the ice can reach a mass that endangers the wind turbine structure, and operation must be suspended in order to prevent mechanical failure. To evaluate the impact of ice on the profits of wind farms, it is important to understand how ice builds up and how much it can affect blade aerodynamics. In response, researchers in the wind energy field have attempted to simulate ice accretion on airfoils in refrigerated wind tunnels. Unfortunately, this is an expensive endeavor, and researchers' budgets are limited. However, ice accretion can be simulated more cost-effectively and with fewer limitations on airfoil size and air speed using numerical methods. Numerical simulation is an approach that can help researchers acquire knowledge in the field of wind energy more quickly. For years, the aviation industry has invested time and money developing computer codes to simulate ice accretion on aircraft wings. Nearly all these codes are restricted to use by aircraft developers, and so they are not accessible to researchers in the wind engineering field. Moreover, these codes have been developed to meet aeronautical industry specifications, which are different from those that must be met in the wind energy industry. Among these differences are the following: wind turbines operate at subsonic speeds; the cords and angles of attack of wind turbine blades are smaller than those of aircraft wings; and a wind turbine can operate with a larger ice mass on its blades than an aircraft can. So, it is important to provide wind energy researchers with tools specifically validated with the operations parameters of a wind turbine. The main goal of this work is to develop a methodology to simulate ice accretion in 2D using Fluent and Matlab, commercial software programs that are available at nearly all research institutions. In this study, we used Gambit, previously the companion tool of Fluent, for mesh generation, and which has now been replaced by ICEM. We decided to stay with Gambit, because we were already deeply involved with the meshing procedure for our simulation of ice accretion at the time Gambit was removed from the market. We validate the methodology with experimental data consisting of iced airfoil contours obtained in a refrigerated wind tunnel using the parameters of actual ice conditions recorded in northern Quebec. This methodology consists of four steps: airfoil meshing, droplet trajectory calculation, thermodynamic model application, and airfoil contour updating. The total simulation time is divided into several time steps, for each of which the four steps are performed until the total time has elapsed. The time step length depends on the icing conditions. (Abstract shortened by UMI.).

Heat, mass and force flows in supersonic shockwave interaction

NASA Astrophysics Data System (ADS)

Dixon, John Michael

There is no cost effective way to deliver a payload to space and, with rising fuel prices, currently the price to travel commercially is also becoming more prohibitive to the public. During supersonic flight, compressive shock waves form around the craft which could be harnessed to deliver an additional lift on the craft. Using a series of hanging plates below a lifting wing design, the total lift generated can be increased above conventional values, while still maintaining a similar lift-to-drag ratio. Here, we study some of the flows involved in supersonic shockwave interaction. This analysis uses ANSYS Fluent Computational Fluid Dynamics package as the modeler. Our findings conclude an increase of up to 30% lift on the modeled craft while maintaining the lift-to-drag profile of the unmodified lifting wing. The increase in lift when utilizing the shockwave interaction could increase transport weight and reduce fuel cost for space and commercial flight, as well as mitigating negative effects associated with supersonic travel.

Numerical wind-tunnel simulation for Spar platform

NASA Astrophysics Data System (ADS)

Shen, Wenjun

2017-05-01

ANSYS Fluent software is used in the simulation analysis of numerical wind tunnel model for the upper Spar platform module. Design Modeler (DM), Meshing, FLUENT and CFD-POST are chosen in the numerical calculation. And DM is used to deal with and repair the geometric model, and Meshing is used to mesh the model, Fluent is used to set up and solve the calculation condition, finally CFD-POST is used for post-processing of the results. The wind loads are obtained under different direction and incidence angles. Finally, comparison is made between numerical results and empirical formula.

Cross-Modal Matching of Audio-Visual German and French Fluent Speech in Infancy

PubMed Central

Kubicek, Claudia; Hillairet de Boisferon, Anne; Dupierrix, Eve; Pascalis, Olivier; Lœvenbruck, Hélène; Gervain, Judit; Schwarzer, Gudrun

2014-01-01

The present study examined when and how the ability to cross-modally match audio-visual fluent speech develops in 4.5-, 6- and 12-month-old German-learning infants. In Experiment 1, 4.5- and 6-month-old infants’ audio-visual matching ability of native (German) and non-native (French) fluent speech was assessed by presenting auditory and visual speech information sequentially, that is, in the absence of temporal synchrony cues. The results showed that 4.5-month-old infants were capable of matching native as well as non-native audio and visual speech stimuli, whereas 6-month-olds perceived the audio-visual correspondence of native language stimuli only. This suggests that intersensory matching narrows for fluent speech between 4.5 and 6 months of age. In Experiment 2, auditory and visual speech information was presented simultaneously, therefore, providing temporal synchrony cues. Here, 6-month-olds were found to match native as well as non-native speech indicating facilitation of temporal synchrony cues on the intersensory perception of non-native fluent speech. Intriguingly, despite the fact that audio and visual stimuli cohered temporally, 12-month-olds matched the non-native language only. Results were discussed with regard to multisensory perceptual narrowing during the first year of life. PMID:24586651

Reproducing American Sign Language sentences: cognitive scaffolding in working memory

PubMed Central

Supalla, Ted; Hauser, Peter C.; Bavelier, Daphne

2014-01-01

The American Sign Language Sentence Reproduction Test (ASL-SRT) requires the precise reproduction of a series of ASL sentences increasing in complexity and length. Error analyses of such tasks provides insight into working memory and scaffolding processes. Data was collected from three groups expected to differ in fluency: deaf children, deaf adults and hearing adults, all users of ASL. Quantitative (correct/incorrect recall) and qualitative error analyses were performed. Percent correct on the reproduction task supports its sensitivity to fluency as test performance clearly differed across the three groups studied. A linguistic analysis of errors further documented differing strategies and bias across groups. Subjects' recall projected the affordance and constraints of deep linguistic representations to differing degrees, with subjects resorting to alternate processing strategies when they failed to recall the sentence correctly. A qualitative error analysis allows us to capture generalizations about the relationship between error pattern and the cognitive scaffolding, which governs the sentence reproduction process. Highly fluent signers and less-fluent signers share common chokepoints on particular words in sentences. However, they diverge in heuristic strategy. Fluent signers, when they make an error, tend to preserve semantic details while altering morpho-syntactic domains. They produce syntactically correct sentences with equivalent meaning to the to-be-reproduced one, but these are not verbatim reproductions of the original sentence. In contrast, less-fluent signers tend to use a more linear strategy, preserving lexical status and word ordering while omitting local inflections, and occasionally resorting to visuo-motoric imitation. Thus, whereas fluent signers readily use top-down scaffolding in their working memory, less fluent signers fail to do so. Implications for current models of working memory across spoken and signed modalities are considered. PMID:25152744

Writing Blocks and Tacit Knowledge.

ERIC Educational Resources Information Center

Boice, Robert

1993-01-01

A review of the literature on writing block looks at two kinds: inability to write in a timely, fluent fashion, and reluctance by academicians to assist others in writing. Obstacles to fluent writing are outlined, four historical trends in treating blocks are discussed, and implications are examined. (MSE)

Identifying controlling variables for math computation fluency through experimental analysis: the interaction of stimulus control and reinforcing consequences.

PubMed

Hofstadter-Duke, Kristi L; Daly, Edward J

2015-03-01

This study investigated a method for conducting experimental analyses of academic responding. In the experimental analyses, academic responding (math computation), rather than problem behavior, was reinforced across conditions. Two separate experimental analyses (one with fluent math computation problems and one with non-fluent math computation problems) were conducted with three elementary school children using identical contingencies while math computation rate was measured. Results indicate that the experimental analysis with non-fluent problems produced undifferentiated responding across participants; however, differentiated responding was achieved for all participants in the experimental analysis with fluent problems. A subsequent comparison of the single-most effective condition from the experimental analyses replicated the findings with novel computation problems. Results are discussed in terms of the critical role of stimulus control in identifying controlling consequences for academic deficits, and recommendations for future research refining and extending experimental analysis to academic responding are made. © The Author(s) 2014.

Rosin-Rammler Distributions in ANSYS Fluent

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunham, Ryan Q.

In Health Physics monitoring, particles need to be collected and tracked. One method is to predict the motion of potential health hazards with computer models. Particles released from various sources within a glove box can become a respirable health hazard if released into the area surrounding a glove box. The goal of modeling the aerosols in a glove box is to reduce the hazards associated with a leak in the glove box system. ANSYS Fluent provides a number of tools for modeling this type of environment. Particles can be released using injections into the flow path with turbulent properties. Themore » models of particle tracks can then be used to predict paths and concentrations of particles within the flow. An attempt to understand and predict the handling of data by Fluent was made, and results iteratively tracked. Trends in data were studied to comprehend the final results. The purpose of the study was to allow a better understanding of the operation of Fluent for aerosol modeling for future application in many fields.« less

Emotional and physiological responses of fluent listeners while watching the speech of adults who stutter.

PubMed

Guntupalli, Vijaya K; Everhart, D Erik; Kalinowski, Joseph; Nanjundeswaran, Chayadevie; Saltuklaroglu, Tim

2007-01-01

People who stutter produce speech that is characterized by intermittent, involuntary part-word repetitions and prolongations. In addition to these signature acoustic manifestations, those who stutter often display repetitive and fixated behaviours outside the speech producing mechanism (e.g. in the head, arm, fingers, nares, etc.). Previous research has examined the attitudes and perceptions of those who stutter and people who frequently interact with them (e.g. relatives, parents, employers). Results have shown an unequivocal, powerful and robust negative stereotype despite a lack of defined differences in personality structure between people who stutter and normally fluent individuals. However, physiological investigations of listener responses during moments of stuttering are limited. There is a need for data that simultaneously examine physiological responses (e.g. heart rate and galvanic skin conductance) and subjective behavioural responses to stuttering. The pairing of these objective and subjective data may provide information that casts light on the genesis of negative stereotypes associated with stuttering, the development of compensatory mechanisms in those who stutter, and the true impact of stuttering on senders and receivers alike. To compare the emotional and physiological responses of fluent speakers while listening and observing fluent and severe stuttered speech samples. Twenty adult participants (mean age = 24.15 years, standard deviation = 3.40) observed speech samples of two fluent speakers and two speakers who stutter reading aloud. Participants' skin conductance and heart rate changes were measured as physiological responses to stuttered or fluent speech samples. Participants' subjective responses on arousal (excited-calm) and valence (happy-unhappy) dimensions were assessed via the Self-Assessment Manikin (SAM) rating scale with an additional questionnaire comprised of a set of nine bipolar adjectives. Results showed significantly increased skin conductance and lower mean heart rate during the presentation of stuttered speech relative to the presentation of fluent speech samples (p<0.05). Listeners also self-rated themselves as being more aroused, unhappy, nervous, uncomfortable, sad, tensed, unpleasant, avoiding, embarrassed, and annoyed while viewing stuttered speech relative to the fluent speech. These data support the notion that stutter-filled speech can elicit physiological and emotional responses in listeners. Clinicians who treat stuttering should be aware that listeners show involuntary physiological responses to moderate-severe stuttering that probably remain salient over time and contribute to the evolution of negative stereotypes of people who stutter. With this in mind, it is hoped that clinicians can work with people who stutter to develop appropriate coping strategies. The role of amygdala and mirror neural mechanism in physiological and subjective responses to stuttering is discussed.

Data resulting from the CFD analysis of ten window frames according to the UNI EN ISO 10077-2.

PubMed

Baglivo, Cristina; Malvoni, Maria; Congedo, Paolo Maria

2016-09-01

Data are related to the numerical simulation performed in the study entitled "CFD modeling to evaluate the thermal performances of window frames in accordance with the ISO 10077" (Malvoni et al., 2016) [1]. The paper focuses on the results from a two-dimensional numerical analysis for ten frame sections suggested by the ISO 10077-2 and performed using GAMBIT 2.2 and ANSYS FLUENT 14.5 CFD code. The dataset specifically includes information about the CFD setup and boundary conditions considered as the input values of the simulations. The trend of the isotherms points out the different impacts on the thermal behaviour of all sections with air solid material or ideal gas into the cavities.

Characteristics of stuttering-like disfluencies in Dutch-speaking children.

PubMed

Boey, Ronny A; Wuyts, Floris L; Van de Heyning, Paul H; De Bodt, Marc S; Heylen, Louis

2007-01-01

The purpose of this study was to compare the characteristics of stuttering-like disfluencies in a group of native Dutch-speaking children who stutter (n=693), with a group of normally fluent children (n=79). Methods involved the observation of stuttering-like disfluencies in participants' conversational speech samples (total 77,200 words), particularly the frequency, duration and physical tension of instances of stuttering. Findings indicate that stuttering-like disfluencies exhibited by children who stutter are significantly more frequent, longer in duration and involve more physical tension when compared to those of normally fluent children. Furthermore, applying a criterion of 3% stuttering-like disfluencies to distinguish stuttering from normally fluent children resulted in a high degree of sensitivity (0.9452) and specificity (0.9747). Results were taken to suggest that characteristics of stuttering-like disfluencies of Dutch-speaking children are similar to those of English-speaking children and that talker group membership criteria for childhood stuttering can reasonably be extrapolated from the Dutch to the English language and vice versa. The reader will be able to: (1) describe characteristics of stuttering-like disfluencies, (2) define properties such as frequency, duration and physical tension for stuttering children and normally fluent children, and (3) make use of data on sensitivity and specificity of the criterion of 3% stuttering-like disfluencies to distinguish stuttering and normally fluent children.

The Main Concept Analysis: Validation and sensitivity in differentiating discourse produced by unimpaired English speakers from individuals with aphasia and dementia of Alzheimer type.

PubMed

Kong, Anthony Pak-Hin; Whiteside, Janet; Bargmann, Peggy

2016-10-01

Discourse from speakers with dementia and aphasia is associated with comparable but not identical deficits, necessitating appropriate methods to differentiate them. The current study aims to validate the Main Concept Analysis (MCA) to be used for eliciting and quantifying discourse among native typical English speakers and to establish its norm, and investigate the validity and sensitivity of the MCA to compare discourse produced by individuals with fluent aphasia, non-fluent aphasia, or dementia of Alzheimer's type (DAT), and unimpaired elderly. Discourse elicited through a sequential picture description task was collected from 60 unimpaired participants to determine the MCA scoring criteria; 12 speakers with fluent aphasia, 12 with non-fluent aphasia, 13 with DAT, and 20 elderly participants from the healthy group were compared on the finalized MCA. Results of MANOVA revealed significant univariate omnibus effects of speaker group as an independent variable on each main concept index. MCA profiles differed significantly between all participant groups except dementia versus fluent aphasia. Correlations between the MCA performances and the Western Aphasia Battery and Cognitive Linguistic Quick Test were found to be statistically significant among the clinical groups. The MCA was appropriate to be used among native speakers of English. The results also provided further empirical evidence of discourse deficits in aphasia and dementia. Practitioners can use the MCA to evaluate discourse production systemically and objectively.

Influence of Contact Angle Boundary Condition on CFD Simulation of T-Junction

NASA Astrophysics Data System (ADS)

Arias, S.; Montlaur, A.

2018-03-01

In this work, we study the influence of the contact angle boundary condition on 3D CFD simulations of the bubble generation process occurring in a capillary T-junction. Numerical simulations have been performed with the commercial Computational Fluid Dynamics solver ANSYS Fluent v15.0.7. Experimental results serve as a reference to validate numerical results for four independent parameters: the bubble generation frequency, volume, velocity and length. CFD simulations accurately reproduce experimental results both from qualitative and quantitative points of view. Numerical results are very sensitive to the gas-liquid-wall contact angle boundary conditions, confirming that this is a fundamental parameter to obtain accurate CFD results for simulations of this kind of problems.

Automatic Residential/Commercial Classification of Parcels with Solar Panel Detections

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morton, April M; Omitaomu, Olufemi A; Kotikot, Susan

A computational method to automatically detect solar panels on rooftops to aid policy and financial assessment of solar distributed generation. The code automatically classifies parcels containing solar panels in the U.S. as residential or commercial. The code allows the user to specify an input dataset containing parcels and detected solar panels, and then uses information about the parcels and solar panels to automatically classify the rooftops as residential or commercial using machine learning techniques. The zip file containing the code includes sample input and output datasets for the Boston and DC areas.

Simulation of a shock tube with a small exit nozzle

NASA Astrophysics Data System (ADS)

Luan, Yigang; Olzmann, Matthias; Magagnato, Franco

2018-02-01

Shock tubes are frequently used to rapidly heat up reaction mixtures to study chemical reaction mechanisms and kinetics in the field of combustion chemistry [1]. In the present work, the flow field inside a shock tube with a small nozzle in the end plate has been investigated to support the analysis of reacting chemical mixtures with an attached mass spectrometer and to clarify whether the usual assumptions for the flow field and the related thermodynamics are fulfilled. In the present work, the details of the flow physics inside the tube and the flow out of the nozzle in the end plate have been investigated. Due to the large differences in the typical length scales and the large pressure ratios of this special device, a very strong numerical stiffness prevails during the simulation process. Second-order ROE numerical schemes have been employed to simulate the flow field inside the shock tube. The simulations were performed with the commercial code ANSYS Fluent [2]. Axial-symmetric boundary conditions are employed to reduce the consumption of CPU time. A density-based transient scheme has been used and validated in terms of accuracy and efficiency. The simulation results for pressure and density are compared with analytical solutions. Numerical results show that a density-based numerical scheme performs better when dealing with shock-tube problems [5]. The flow field near the nozzle is studied in detail, and the effects of the nozzle to pressure and temperature variations inside the tube are investigated. The results show that this special shock-tube setup can be used to study high-temperature gas-phase chemical reactions with reasonable accuracy.

/S/ Variation as Accommodation.

ERIC Educational Resources Information Center

Coles, Felice Anne

1993-01-01

The few remaining fluent speakers of the isleno dialect of Spanish vary their casual pronunciation of /s/ in a manner consistent with, but not identical to, other Caribbean Spanish dialects. The behavior of /s/ in the speech of nonfluent islenos parallels that of fluent speakers, differing only in the higher degree of aspiration and deletion. This…

The Effect of Rhythmic Auditory Stimulation on the Disfluency of Nonstutterers

ERIC Educational Resources Information Center

Silverman, Franklin H.

1971-01-01

Twenty adult male nonstutterers became more fluent when pacing their speech with a metronome. The degree to which they became more fluent was within the range which has been reported for stutterers. This finding suggests that the effect of the metronome on stuttering is not primarily a result of distraction. (Author/KW)

Reclassification of English Learner Students in California. Technical Appendices

ERIC Educational Resources Information Center

Hill, Laura E.; Weston, Margaret; Hayes, Joseph M.

2014-01-01

Former English Learner students who have improved their facility with English to such a degree that they have been reclassified by their school districts as fluent in the English language are among the best performing students in the state. Because these Reclassified Fluent English Proficient (RFEP) students have much better academic outcomes than…

Reclassification of English Learner Students in California

ERIC Educational Resources Information Center

Hill, Laura E.; Weston, Margaret; Hayes, Joseph M.

2014-01-01

Former English Learner students who have improved their facility with English to such a degree that they have been reclassified by their school districts as fluent in the English language are among the best performing students in the state. Because these Reclassified Fluent English Proficient (RFEP) students have much better academic outcomes than…

Extending Interactive Writing into Grades 2-5

ERIC Educational Resources Information Center

Roth, Kate; Dabrowski, Joan

2014-01-01

Interactive writing is an instructional practice widely considered effective and most appropriate for emergent writers. This article asserts that it is a valuable method for more fluent writers in grades 2-5. It outlines the basic lesson sequence and proposes four key shifts to adapt interactive writing for older, more fluent writers: 1) The…

Coordination of Oral and Laryngeal Movements in the Perceptually Fluent Speech of Adults Who Stutter

ERIC Educational Resources Information Center

Max, Ludo; Gracco, Vincent L.

2005-01-01

This work investigated whether stuttering and nonstuttering adults differ in the coordination of oral and laryngeal movements during the production of perceptually fluent speech. This question was addressed by completing correlation analyses that extended previous acoustic studies by others as well as inferential analyses based on the…

Speech Errors in Progressive Non-Fluent Aphasia

ERIC Educational Resources Information Center

Ash, Sharon; McMillan, Corey; Gunawardena, Delani; Avants, Brian; Morgan, Brianna; Khan, Alea; Moore, Peachie; Gee, James; Grossman, Murray

2010-01-01

The nature and frequency of speech production errors in neurodegenerative disease have not previously been precisely quantified. In the present study, 16 patients with a progressive form of non-fluent aphasia (PNFA) were asked to tell a story from a wordless children's picture book. Errors in production were classified as either phonemic,…

Modulation of N400 in Chronic Non-Fluent Aphasia Using Low Frequency Repetitive Transcranial Magnetic Stimulation (rTMS)

ERIC Educational Resources Information Center

Barwood, Caroline H. S.; Murdoch, Bruce E.; Whelan, Brooke-Mai; Lloyd, David; Riek, Stephan; O'Sullivan, John D.; Coulthard, Alan; Wong, Andrew

2011-01-01

Low frequency Repetitive Transcranial Magnetic Stimulation (rTMS) has previously been applied to language homologues in non-fluent populations of persons with aphasia yielding significant improvements in behavioral language function up to 43 months post stimulation. The present study aimed to investigate the electrophysiological correlates…

Differences of Articulation Rate and Utterance Length in Fluent and Disfluent Utterances of Preschool Children Who Stutter

ERIC Educational Resources Information Center

Chon, HeeCheong; Sawyer, Jean; Ambrose, Nicoline G.

2012-01-01

Purpose: The purpose of this study was to investigate characteristics of four types of utterances in preschool children who stutter: perceptually fluent, containing normal disfluencies (OD utterance), containing stuttering-like disfluencies (SLD utterance), and containing both normal and stuttering-like disfluencies (SLD+OD utterance).…

Under Construction: Minority Girls Becoming Technologically Fluent in an Urban After-School Program

ERIC Educational Resources Information Center

De La Pena, Yvonne

2012-01-01

Technological fluency involves having a deep understanding of information technology as well as an identity as someone who engages with technology in meaningful and complex ways. Hence, it is more fruitful to think about individuals not as developing technological fluency but rather as becoming technologically fluent. Although physical access to…

A Fluent Language Disorder Following Antepartum Left-Hemisphere Brain Injury.

ERIC Educational Resources Information Center

Feldman, Heidi M.; And Others

1992-01-01

This article describes the language development in a left-handed young child with a left middle cerebral artery infarction. Patterns of development observed between 36 and 60 months of age are described as a transient jargon or fluent aphasia possibly resulting from initial reliance on an uninjured right hemisphere. (Author/DB)

Analysis of oral narratives of children who stutter and their fluent peers: kindergarten through second grade.

PubMed

Bajaj, Amit

2007-03-01

Measures of language sample length (in c-units) and morphological, syntactic, and narrative abilities were obtained from oral narrative transcripts of 22 children who stutter and 22 children who do not stutter; participants attended kindergarten, first, and second grades. A two-way MANOVA yielded significant main effects for grade, with significant differences on some measures evidenced between participants in kindergarten and second grades. No significant differences between groups or group-grade interaction effects on the measures were obtained. Grade-wise comparisons (through t-tests) indicated that the performance of children who stutter did not differ significantly from their typically fluent peers on all dependent measures; however, kindergarten children who stutter obtained the most discrepant (lower) scores than their grade-matched fluent peers on the Narrative Scoring Scheme measure, with group differences approaching statistical significance on this measure. The findings suggest that children who do and do not stutter evidence similar expressive language abilities, even as subgroups of children who stutter may lag behind their grade-matched fluent peers in particular language domains.

Deep dysphasic performance in non-fluent progressive aphasia: a case study.

PubMed

Tree, J J; Perfect, T J; Hirsh, K W; Copstick, S

2001-01-01

We present a patient (PW) with non-fluent progressive aphasia, characterized by severe word finding difficulties and frequent phonemic paraphasias in spontaneous speech. It has been suggested that such patients have insufficient access to phonological information for output and cannot construct the appropriate sequence of selected phonemes for articulation. Consistent with such a proposal, we found that PW was impaired on a variety of verbal tasks that demand access to phonological representations (reading, repetition, confrontational naming and rhyme judgement); she also demonstrated poor performance on syntactic and grammatical processing tasks. However, examination of PW's repetition performance also revealed that she made semantic paraphasias and that her performance was influenced by imageability and lexical status. Her auditory-verbal short-term memory was also severely compromised. These features are consistent with 'deep dysphasia', a disorder reported in patients suffering from stroke or cerebrovascular accident, and rarely reported in the context of non-fluent progressive aphasia. PW's pattern of performance is evaluated in terms of current models of both non-fluent progressive aphasia and deep dysphasia.

Design and evaluation of a high temperature/pressure supercritical carbon dioxide direct tubular receiver for concentrating solar power applications

NASA Astrophysics Data System (ADS)

Ortega, Jesus Daniel

This work focuses on the development of a solar power thermal receiver for a supercritical-carbon dioxide (sCO2), Brayton power-cycle to produce ~1 MWe. Closed-loop sCO2 Brayton cycles are being evaluated in combination with concentrating solar power to provide higher thermal-to-electric conversion efficiencies relative to conventional steam Rankine cycles. High temperatures (923--973 K) and pressures (20--25 MPa) are required in the solar receiver to achieve thermal efficiencies of ~50%, making concentrating solar power (CSP) technologies a competitive alternative to current power generation methods. In this study, the CSP receiver is required to achieve an outlet temperature of 923 K at 25 MPa or 973 K at 20 MPa to meet the operating needs. To obtain compatible receiver tube material, an extensive material review was performed based the ASME Boiler and Pressure Vessel Code, ASME B31.1 and ASME B313.3 codes respectively. Subsequently, a thermal-structural model was developed using a commercial computational fluid (CFD) dynamics and structural mechanics software for designing and analyzing the tubular receiver that could provide the heat input for a ~2 MWth plant. These results were used to perform an analytical cumulative damage creep-fatigue analysis to estimate the work-life of the tubes. In sequence, an optical-thermal-fluid model was developed to evaluate the resulting thermal efficiency of the tubular receiver from the NSTTF heliostat field. The ray-tracing tool SolTrace was used to obtain the heat-flux distribution on the surfaces of the receiver. The K-ω SST turbulence model and P-1 radiation model used in Fluent were coupled with SolTrace to provide the heat flux distribution on the receiver surface. The creep-fatigue analysis displays the damage accumulated due to the cycling and the permanent deformation of the tubes. Nonetheless, they are able to support the required lifetime. The receiver surface temperatures were found to be within the safe operational limit while exhibiting a receiver thermal efficiency of ~85%. Future work includes the completion of a cyclic loading analysis to be performed using the Larson-Miller creep model in nCode Design Life to corroborate the structural integrity of the receiver over the desired lifetime of ~10,000 cycles.

Rethinking covert stuttering.

PubMed

Constantino, Christopher Dominick; Manning, Walter H; Nordstrom, Susan Naomi

2017-09-01

The experience of passing as fluent, also called covert stuttering, has been uncritically framed as an inherently negative pursuit. Historically passing has been understood as a repression of one's true, authentic self in response to either psychological distress or social discrimination. The authors of this paper seek a more nuanced understanding of passing. We ask, how must a person relate to herself in order to pass as fluent? This is a qualitative research study in which the authors utilized the ethical theories of philosopher Michel Foucault to contextualize data obtained from semi-structured interviews with nine participants who pass as fluent. Rather than a repression of an authentic self our data suggests passing is more usefully understood as a form of resistance by people who stutter to a hostile society. Participants learned from experiences of delegitimization that their stuttering had ethical ramifications. Consequently, they used a variety of self-forming practices to pass and thereby achieve the privileges that come with perceived able-bodiedness. Passing as fluent is not an inauthentic form of stuttering but a form of stuttering that is produced through the use of specific technologies of communication. These technologies of communication are constituted by the unique ethical relationship of the person who stutters with herself. Passing can be understood as an active form of resistance rather than a passive form of repression. By theorizing passing as fluent as an ethical relationship, we open up the possibility of changing the relationship and performing it differently. Copyright © 2017 Elsevier Inc. All rights reserved.

The trouble with nouns and verbs in Greek fluent aphasia.

PubMed

Kambanaros, Maria

2008-01-01

In the past verb retrieval problems were associated primarily with agrammatism and noun retrieval difficulties with fluent aphasia. With regards to fluent aphasia, so far in the literature, three distinct patterns of verb/noun dissociations have been described for individuals with fluent anomic aphasia in languages with different underlying forms; better verb retrieval, poorer verb retrieval and equal retrieval difficulties for verbs and nouns. Verbs and nouns in Greek are considered of similar morphological complexity thus it was predicted that anomic aphasic individuals would suffer from a non-dissociated impairment of verbs and nouns. Problems with verbs and/or nouns may arise at any stage in the process of lexical retrieval, i.e. lexical-semantic, lemma, lexeme or articulation. The aim of this research was to investigate verb and noun retrieval using a picture-naming task to explore any possible selective noun and/or verb comprehension or retrieval deficits in Greek individuals with anomic aphasia. The results revealed a significant verb/noun dichotomy with verbs significantly more difficult to retrieve than nouns. These findings lend support for the growing body of evidence showing a specific verb impairment in fluent anomic individuals as well as Broca's patients. Given the prevailing view, that anomic patients experience difficulty retrieving the morpho-phonological form of the target word, the results show that specific information of the grammatical category is also important during word form retrieval. LEARNER OUTCOMES: The reader will become familiar with (i) studies investigating grammatical word class breakdown in individuals with aphasia who speak different languages, (ii) the application of the serial model to word production breakdown in aphasia and (iii) the characteristics of verbs and nouns in Greek. It will be concluded that successful verb retrieval for fluent aphasic individuals who speak Greek is dependant on the retrieval of the morpho-phonological information of the target verb.

Computational Fluid Dynamic simulations of pipe elbow flow.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Homicz, Gregory Francis

2004-08-01

One problem facing today's nuclear power industry is flow-accelerated corrosion and erosion in pipe elbows. The Korean Atomic Energy Research Institute (KAERI) is performing experiments in their Flow-Accelerated Corrosion (FAC) test loop to better characterize these phenomena, and develop advanced sensor technologies for the condition monitoring of critical elbows on a continuous basis. In parallel with these experiments, Sandia National Laboratories is performing Computational Fluid Dynamic (CFD) simulations of the flow in one elbow of the FAC test loop. The simulations are being performed using the FLUENT commercial software developed and marketed by Fluent, Inc. The model geometry and meshmore » were created using the GAMBIT software, also from Fluent, Inc. This report documents the results of the simulations that have been made to date; baseline results employing the RNG k-e turbulence model are presented. The predicted value for the diametrical pressure coefficient is in reasonably good agreement with published correlations. Plots of the velocities, pressure field, wall shear stress, and turbulent kinetic energy adjacent to the wall are shown within the elbow section. Somewhat to our surprise, these indicate that the maximum values of both wall shear stress and turbulent kinetic energy occur near the elbow entrance, on the inner radius of the bend. Additional simulations were performed for the same conditions, but with the RNG k-e model replaced by either the standard k-{var_epsilon}, or the realizable k-{var_epsilon} turbulence model. The predictions using the standard k-{var_epsilon} model are quite similar to those obtained in the baseline simulation. However, with the realizable k-{var_epsilon} model, more significant differences are evident. The maximums in both wall shear stress and turbulent kinetic energy now appear on the outer radius, near the elbow exit, and are {approx}11% and 14% greater, respectively, than those predicted in the baseline calculation; secondary maxima in both quantities still occur near the elbow entrance on the inner radius. Which set of results better reflects reality must await experimental corroboration. Additional calculations demonstrate that whether or not FLUENT's radial equilibrium pressure distribution option is used in the PRESSURE OUTLET boundary condition has no significant impact on the flowfield near the elbow. Simulations performed with and without the chemical sensor and associated support bracket that were present in the experiments demonstrate that the latter have a negligible influence on the flow in the vicinity of the elbow. The fact that the maxima in wall shear stress and turbulent kinetic energy occur on the inner radius is therefore not an artifact of having introduced the sensor into the flow.« less

Analysis of SMA Hybrid Composite Structures in MSC.Nastran and ABAQUS

NASA Technical Reports Server (NTRS)

Turner, Travis L.; Patel, Hemant D.

2005-01-01

A thermoelastic constitutive model for shape memory alloy (SMA) actuators and SMA hybrid composite (SMAHC) structures was recently implemented in the commercial finite element codes MSC.Nastran and ABAQUS. The model may be easily implemented in any code that has the capability for analysis of laminated composite structures with temperature dependent material properties. The model is also relatively easy to use and requires input of only fundamental engineering properties. A brief description of the model is presented, followed by discussion of implementation and usage in the commercial codes. Results are presented from static and dynamic analysis of SMAHC beams of two types; a beam clamped at each end and a cantilever beam. Nonlinear static (post-buckling) and random response analyses are demonstrated for the first specimen. Static deflection (shape) control is demonstrated for the cantilever beam. Approaches for modeling SMAHC material systems with embedded SMA in ribbon and small round wire product forms are demonstrated and compared. The results from the commercial codes are compared to those from a research code as validation of the commercial implementations; excellent correlation is achieved in all cases.

Formant transitions in the fluent speech of Farsi-speaking people who stutter.

PubMed

Dehqan, Ali; Yadegari, Fariba; Blomgren, Michael; Scherer, Ronald C

2016-06-01

Second formant (F2) transitions can be used to infer attributes of articulatory transitions. This study compared formant transitions during fluent speech segments of Farsi (Persian) speaking people who stutter and normally fluent Farsi speakers. Ten Iranian males who stutter and 10 normally fluent Iranian males participated. Sixteen different "CVt" tokens were embedded within the phrase "Begu CVt an". Measures included overall F2 transition frequency extents, durations, and derived overall slopes, initial F2 transition slopes at 30ms and 60ms, and speaking rate. (1) Mean overall formant frequency extent was significantly greater in 14 of the 16 CVt tokens for the group of stuttering speakers. (2) Stuttering speakers exhibited significantly longer overall F2 transitions for all 16 tokens compared to the nonstuttering speakers. (3) The overall F2 slopes were similar between the two groups. (4) The stuttering speakers exhibited significantly greater initial F2 transition slopes (positive or negative) for five of the 16 tokens at 30ms and six of the 16 tokens at 60ms. (5) The stuttering group produced a slower syllable rate than the non-stuttering group. During perceptually fluent utterances, the stuttering speakers had greater F2 frequency extents during transitions, took longer to reach vowel steady state, exhibited some evidence of steeper slopes at the beginning of transitions, had overall similar F2 formant slopes, and had slower speaking rates compared to nonstuttering speakers. Findings support the notion of different speech motor timing strategies in stuttering speakers. Findings are likely to be independent of the language spoken. Educational objectives This study compares aspects of F2 formant transitions between 10 stuttering and 10 nonstuttering speakers. Readers will be able to describe: (a) characteristics of formant frequency as a specific acoustic feature used to infer speech movements in stuttering and nonstuttering speakers, (b) two methods of measuring second formant (F2) transitions: the visual criteria method and fixed time criteria method, (c) characteristics of F2 transitions in the fluent speech of stuttering speakers and how those characteristics appear to differ from normally fluent speakers, and (d) possible cross-linguistic effects on acoustic analyses of stuttering. Copyright © 2016 Elsevier Inc. All rights reserved.

Damage to the anterior arcuate fasciculus predicts non-fluent speech production in aphasia.

PubMed

Fridriksson, Julius; Guo, Dazhou; Fillmore, Paul; Holland, Audrey; Rorden, Chris

2013-11-01

Non-fluent aphasia implies a relatively straightforward neurological condition characterized by limited speech output. However, it is an umbrella term for different underlying impairments affecting speech production. Several studies have sought the critical lesion location that gives rise to non-fluent aphasia. The results have been mixed but typically implicate anterior cortical regions such as Broca's area, the left anterior insula, and deep white matter regions. To provide a clearer picture of cortical damage in non-fluent aphasia, the current study examined brain damage that negatively influences speech fluency in patients with aphasia. It controlled for some basic speech and language comprehension factors in order to better isolate the contribution of different mechanisms to fluency, or its lack. Cortical damage was related to overall speech fluency, as estimated by clinical judgements using the Western Aphasia Battery speech fluency scale, diadochokinetic rate, rudimentary auditory language comprehension, and executive functioning (scores on a matrix reasoning test) in 64 patients with chronic left hemisphere stroke. A region of interest analysis that included brain regions typically implicated in speech and language processing revealed that non-fluency in aphasia is primarily predicted by damage to the anterior segment of the left arcuate fasciculus. An improved prediction model also included the left uncinate fasciculus, a white matter tract connecting the middle and anterior temporal lobe with frontal lobe regions, including the pars triangularis. Models that controlled for diadochokinetic rate, picture-word recognition, or executive functioning also revealed a strong relationship between anterior segment involvement and speech fluency. Whole brain analyses corroborated the findings from the region of interest analyses. An additional exploratory analysis revealed that involvement of the uncinate fasciculus adjudicated between Broca's and global aphasia, the two most common kinds of non-fluent aphasia. In summary, the current results suggest that the anterior segment of the left arcuate fasciculus, a white matter tract that lies deep to posterior portions of Broca's area and the sensory-motor cortex, is a robust predictor of impaired speech fluency in aphasic patients, even when motor speech, lexical processing, and executive functioning are included as co-factors. Simply put, damage to those regions results in non-fluent aphasic speech; when they are undamaged, fluent aphasias result.

Damage to the anterior arcuate fasciculus predicts non-fluent speech production in aphasia

PubMed Central

Guo, Dazhou; Fillmore, Paul; Holland, Audrey; Rorden, Chris

2013-01-01

Non-fluent aphasia implies a relatively straightforward neurological condition characterized by limited speech output. However, it is an umbrella term for different underlying impairments affecting speech production. Several studies have sought the critical lesion location that gives rise to non-fluent aphasia. The results have been mixed but typically implicate anterior cortical regions such as Broca’s area, the left anterior insula, and deep white matter regions. To provide a clearer picture of cortical damage in non-fluent aphasia, the current study examined brain damage that negatively influences speech fluency in patients with aphasia. It controlled for some basic speech and language comprehension factors in order to better isolate the contribution of different mechanisms to fluency, or its lack. Cortical damage was related to overall speech fluency, as estimated by clinical judgements using the Western Aphasia Battery speech fluency scale, diadochokinetic rate, rudimentary auditory language comprehension, and executive functioning (scores on a matrix reasoning test) in 64 patients with chronic left hemisphere stroke. A region of interest analysis that included brain regions typically implicated in speech and language processing revealed that non-fluency in aphasia is primarily predicted by damage to the anterior segment of the left arcuate fasciculus. An improved prediction model also included the left uncinate fasciculus, a white matter tract connecting the middle and anterior temporal lobe with frontal lobe regions, including the pars triangularis. Models that controlled for diadochokinetic rate, picture-word recognition, or executive functioning also revealed a strong relationship between anterior segment involvement and speech fluency. Whole brain analyses corroborated the findings from the region of interest analyses. An additional exploratory analysis revealed that involvement of the uncinate fasciculus adjudicated between Broca’s and global aphasia, the two most common kinds of non-fluent aphasia. In summary, the current results suggest that the anterior segment of the left arcuate fasciculus, a white matter tract that lies deep to posterior portions of Broca’s area and the sensory-motor cortex, is a robust predictor of impaired speech fluency in aphasic patients, even when motor speech, lexical processing, and executive functioning are included as co-factors. Simply put, damage to those regions results in non-fluent aphasic speech; when they are undamaged, fluent aphasias result. PMID:24131592

An Initial Non-Equilibrium Porous-Media Model for CFD Simulation of Stirling Regenerators

NASA Technical Reports Server (NTRS)

Tew, Roy C.; Simon, Terry; Gedeon, David; Ibrahim, Mounir; Rong, Wei

2006-01-01

The objective of this paper is to define empirical parameters for an initial thermal non-equilibrium porous-media model for use in Computational Fluid Dynamics (CFD) codes for simulation of Stirling regenerators. The two codes currently used at Glenn Research Center for Stirling modeling are Fluent and CFD-ACE. The codes porous-media models are equilibrium models, which assume solid matrix and fluid are in thermal equilibrium. This is believed to be a poor assumption for Stirling regenerators; Stirling 1-D regenerator models, used in Stirling design, use non-equilibrium regenerator models and suggest regenerator matrix and gas average temperatures can differ by several degrees at a given axial location and time during the cycle. Experimentally based information was used to define: hydrodynamic dispersion, permeability, inertial coefficient, fluid effective thermal conductivity, and fluid-solid heat transfer coefficient. Solid effective thermal conductivity was also estimated. Determination of model parameters was based on planned use in a CFD model of Infinia's Stirling Technology Demonstration Converter (TDC), which uses a random-fiber regenerator matrix. Emphasis is on use of available data to define empirical parameters needed in a thermal non-equilibrium porous media model for Stirling regenerator simulation. Such a model has not yet been implemented by the authors or their associates.

Compliance Verification Paths for Residential and Commercial Energy Codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, David R.; Makela, Eric J.; Fannin, Jerica D.

2011-10-10

This report looks at different ways to verify energy code compliance and to ensure that the energy efficiency goals of an adopted document are achieved. Conformity assessment is the body of work that ensures compliance, including activities that can ensure residential and commercial buildings satisfy energy codes and standards. This report identifies and discusses conformity-assessment activities and provides guidance for conducting assessments.

Computational Analysis of Human Blood Flow

NASA Astrophysics Data System (ADS)

Panta, Yogendra; Marie, Hazel; Harvey, Mark

2009-11-01

Fluid flow modeling with commercially available computational fluid dynamics (CFD) software is widely used to visualize and predict physical phenomena related to various biological systems. In this presentation, a typical human aorta model was analyzed assuming the blood flow as laminar with complaint cardiac muscle wall boundaries. FLUENT, a commercially available finite volume software, coupled with Solidworks, a modeling software, was employed for the preprocessing, simulation and postprocessing of all the models.The analysis mainly consists of a fluid-dynamics analysis including a calculation of the velocity field and pressure distribution in the blood and a mechanical analysis of the deformation of the tissue and artery in terms of wall shear stress. A number of other models e.g. T branches, angle shaped were previously analyzed and compared their results for consistency for similar boundary conditions. The velocities, pressures and wall shear stress distributions achieved in all models were as expected given the similar boundary conditions. The three dimensional time dependent analysis of blood flow accounting the effect of body forces with a complaint boundary was also performed.

Assessing Potential Energy Cost Savings from Increased Energy Code Compliance in Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, Michael I.; Hart, Philip R.; Athalye, Rahul A.

The US Department of Energy’s most recent commercial energy code compliance evaluation efforts focused on determining a percent compliance rating for states to help them meet requirements under the American Recovery and Reinvestment Act (ARRA) of 2009. That approach included a checklist of code requirements, each of which was graded pass or fail. Percent compliance for any given building was simply the percent of individual requirements that passed. With its binary approach to compliance determination, the previous methodology failed to answer some important questions. In particular, how much energy cost could be saved by better compliance with the commercial energymore » code and what are the relative priorities of code requirements from an energy cost savings perspective? This paper explores an analytical approach and pilot study using a single building type and climate zone to answer those questions.« less

Communicative Ability Conceptions among Children Who Stutter and Their Fluent Peers: A Qualitative Exploration

ERIC Educational Resources Information Center

Bajaj, Amit; Hodson, Barbara; Westby, Carol

2005-01-01

Meta issues in stuttering were examined by analyzing verbal-descriptive data drawn from structured interviews with 23 male children who stutter (CWS) and their 23 fluent male peers. Participants described others' "good" and "bad" talk behaviors and provided their self-appraisals as talkers. Analysis of interview transcripts suggested that CWS…

Assisting a Struggling Turkish Student with a Repeated Reading Fluency Intervention

ERIC Educational Resources Information Center

Yildirim, Kasim; Ritz, Elizabeth; Akyol, Hayati; Rasinski, Timothy

2015-01-01

One of the most important aims of teaching reading is to help students acquire fluent reading skills. With this aim in mind, this study attempted to support a student with difficulty to become a fluent reader by improving his reading skills using a fluency instruction method called repeated reading. This study was performed with an elementary…

Making English Learner Reclassification to Fluent English Proficient Attainable or Elusive: When Meeting Criteria Is and Is "Not" Enough

ERIC Educational Resources Information Center

Estrada, Peggy; Wang, Haiwen

2018-01-01

Employing longitudinal, multisite comparative mixed-methods, we describe patterns of reclassifying and not reclassifying eligible English learner (EL) students to fluent English proficient, and we identify factors impeding and facilitating reclassification. Analyses of administrative data for 7 cohorts of students over 3 years in one district and…

A Comparison of Coverbal Gesture Use in Oral Discourse among Speakers with Fluent and Nonfluent Aphasia

ERIC Educational Resources Information Center

Kong, Anthony Pak-Hin; Law, Sam-Po; Chak, Gigi Wan-Chi

2017-01-01

Purpose: Coverbal gesture use, which is affected by the presence and degree of aphasia, can be culturally specific. The purpose of this study was to compare gesture use among Cantonese-speaking individuals: 23 neurologically healthy speakers, 23 speakers with fluent aphasia, and 21 speakers with nonfluent aphasia. Method: Multimedia data of…

Individual Variability in Delayed Auditory Feedback Effects on Speech Fluency and Rate in Normally Fluent Adults

ERIC Educational Resources Information Center

Chon, HeeCheong; Kraft, Shelly Jo; Zhang, Jingfei; Loucks, Torrey; Ambrose, Nicoline G.

2013-01-01

Purpose: Delayed auditory feedback (DAF) is known to induce stuttering-like disfluencies (SLDs) and cause speech rate reductions in normally fluent adults, but the reason for speech disruptions is not fully known, and individual variation has not been well characterized. Studying individual variation in susceptibility to DAF may identify factors…

Poetry: A Feast to Form Fluent Readers.

ERIC Educational Resources Information Center

Seitz, Sheila

In this lesson plan, grade 3 to 5 students examine elements of fluent reading through oral poetry performance. They use the Internet to identify a poem to prepare and perform for the class. The main objective of this lesson concerns improving fluency. During four hours over a span of five days, students will: be able to identify text written in…

Early-Stage Chunking of Finger Tapping Sequences by Persons Who Stutter and Fluent Speakers

ERIC Educational Resources Information Center

Smits-Bandstra, Sarah; De Nil, Luc F.

2013-01-01

This research note explored the hypothesis that chunking differences underlie the slow finger-tap sequencing performance reported in the literature for persons who stutter (PWS) relative to fluent speakers (PNS). Early-stage chunking was defined as an immediate and spontaneous tendency to organize a long sequence into pauses, for motor planning,…

Autonomic and Emotional Responses of Graduate Student Clinicians in Speech-Language Pathology to Stuttered Speech

ERIC Educational Resources Information Center

Guntupalli, Vijaya K.; Nanjundeswaran, Chayadevie; Dayalu, Vikram N.; Kalinowski, Joseph

2012-01-01

Background: Fluent speakers and people who stutter manifest alterations in autonomic and emotional responses as they view stuttered relative to fluent speech samples. These reactions are indicative of an aroused autonomic state and are hypothesized to be triggered by the abrupt breakdown in fluency exemplified in stuttered speech. Furthermore,…

Phonation Interval Modification and Speech Performance Quality during Fluency-Inducing Conditions by Adults Who Stutter

ERIC Educational Resources Information Center

Ingham, Roger J.; Bothe, Anne K.; Wang, Yuedong; Purkhiser, Krystal; New, Anneliese

2012-01-01

Purpose: To relate changes in four variables previously defined as characteristic of normally fluent speech to changes in phonatory behavior during oral reading by persons who stutter (PWS) and normally fluent controls under multiple fluency-inducing (FI) conditions. Method: Twelve PWS and 12 controls each completed 4 ABA experiments. During A…

An Initial Non-Equilibrium Porous-Media Model for CFD Simulation of Stirling Regenerators

NASA Technical Reports Server (NTRS)

Tew, Roy; Simon, Terry; Gedeon, David; Ibrahim, Mounir; Rong, Wei

2006-01-01

The objective of this paper is to define empirical parameters (or closwre models) for an initial thermai non-equilibrium porous-media model for use in Computational Fluid Dynamics (CFD) codes for simulation of Stirling regenerators. The two CFD codes currently being used at Glenn Research Center (GRC) for Stirling engine modeling are Fluent and CFD-ACE. The porous-media models available in each of these codes are equilibrium models, which assmne that the solid matrix and the fluid are in thermal equilibrium at each spatial location within the porous medium. This is believed to be a poor assumption for the oscillating-flow environment within Stirling regenerators; Stirling 1-D regenerator models, used in Stirling design, we non-equilibrium regenerator models and suggest regenerator matrix and gas average temperatures can differ by several degrees at a given axial location end time during the cycle. A NASA regenerator research grant has been providing experimental and computational results to support definition of various empirical coefficients needed in defining a noa-equilibrium, macroscopic, porous-media model (i.e., to define "closure" relations). The grant effort is being led by Cleveland State University, with subcontractor assistance from the University of Minnesota, Gedeon Associates, and Sunpower, Inc. Friction-factor and heat-transfer correlations based on data taken with the NASAlSunpower oscillating-flow test rig also provide experimentally based correlations that are useful in defining parameters for the porous-media model; these correlations are documented in Gedeon Associates' Sage Stirling-Code Manuals. These sources of experimentally based information were used to define the following terms and parameters needed in the non-equilibrium porous-media model: hydrodynamic dispersion, permeability, inertial coefficient, fluid effective thermal conductivity (including themal dispersion and estimate of tortuosity effects}, and fluid-solid heat transfer coefficient. Solid effective thermal conductivity (including the effect of tortuosity) was also estimated. Determination of the porous-media model parameters was based on planned use in a CFD model of Infinia's Stirling Technology Demonstration Convertor (TDC), which uses a random-fiber regenerator matrix. The non-equilibrium porous-media model presented is considered to be an initial, or "draft," model for possible incorporation in commercial CFD codes, with the expectation that the empirical parameters will likely need to be updated once resulting Stirling CFD model regenerator and engine results have been analyzed. The emphasis of the paper is on use of available data to define empirical parameters (and closure models) needed in a thermal non-equilibrium porous-media model for Stirling regenerator simulation. Such a model has not yet been implemented by the authors or their associates. However, it is anticipated that a thermal non-equilibrium model such as that presented here, when iacorporated in the CFD codes, will improve our ability to accurately model Stirling regenerators with CFD relative to current thermal-equilibrium porous-media models.

The numerical modelling of mixing phenomena of nanofluids in passive micromixers

NASA Astrophysics Data System (ADS)

Milotin, R.; Lelea, D.

2018-01-01

The paper deals with the rapid mixing phenomena in micro-mixing devices with four tangential injections and converging tube, considering nanoparticles and water as the base fluid. Several parameters like Reynolds number (Re = 6 - 284) or fluid temperature are considered in order to optimize the process and obtain fundamental insight in mixing phenomena. The set of partial differential equations is considered based on conservation of momentum and species. Commercial package software Ansys-Fluent is used for solution of differential equations, based on a finite volume method. The results reveal that mixing index and mixing process is strongly dependent both on Reynolds number and heat flux. Moreover there is a certain Reynolds number when flow instabilities are generated that intensify the mixing process due to the tangential injections of the fluids.

Coverbal gestures in the recovery from severe fluent aphasia: a pilot study.

PubMed

Carlomagno, Sergio; Zulian, Nicola; Razzano, Carmelina; De Mercurio, Ilaria; Marini, Andrea

2013-01-01

This post hoc study investigated coverbal gesture patterns in two persons with chronic Wernicke's aphasia. They had both received therapy focusing on multimodal communication therapy, and their pre- and post-therapy verbal and gestural skills in face-to-face conversational interaction with their speech therapist were analysed by administering a partial barrier Referential Communication Task (RCT). The RCT sessions were reviewed in order to analyse: (a) participant coverbal gesture occurrence and types when in speaker role, (b) distribution of iconic gestures in the RCT communicative moves, (c) recognisable semantic content, and (d) the ways in which gestures were combined with empty or paraphasic speech. At post-therapy assessment only one participant showed improved communication skills in spite of his persistent language deficits. The improvement corresponded to changes on all gesturing measures, suggesting thereby that his communication relied more on gestural information. No measurable changes were observed for the non-responding participant-a finding indicating that the coverbal gesture measures used in this study might account for the different outcomes. These results point to the potential role of gestures in treatment aimed at fostering recovery from severe fluent aphasia. Moreover, this pattern of improvement runs contrary to a view of gestures used as a pure substitute for lexical items, in the communication of people with severe fluent aphasia. The readers will describe how to assess and interpret the patterns of coverbal gesturing in persons with fluent aphasia. They will also recognize the potential role of coverbal gestures in recovery from severe fluent aphasia. Copyright © 2012 Elsevier Inc. All rights reserved.

Epidural cortical stimulation as adjunctive treatment for non-fluent aphasia: preliminary findings.

PubMed

Cherney, Leora R; Erickson, Robert K; Small, Steven L

2010-09-01

This study evaluated the safety and feasibility of targeted epidural cortical stimulation delivered concurrently with intensive speech-language therapy for treatment of chronic non-fluent aphasia. Eight stroke survivors with non-fluent aphasia received intensive behavioural therapy for 3 h daily for 6 weeks using a combination of articulation drills, oral reading and conversational practice. Four of these participants (investigational participants) also underwent functional MRI guided surgical implantation of an epidural stimulation device which was activated only during therapy sessions. Behavioural data were collected before treatment, immediately after treatment and at 6 and 12 weeks following termination of therapy. Imaging data were collected before and after treatment. Investigational participants showed a mean Aphasia Quotient change of 8.0 points immediately post-therapy and at the 6 week follow-up, and 12.3 points at 12 weeks. The control group had changes of 4.6, 5.5 and 3.6 points, respectively. Similar changes were noted on subjective caregiver ratings. Functional imaging suggested increased consolidation of activity in interventional participants. Behavioural speech-language therapy improves non-fluent aphasia, independent of cortical stimulation. However, epidural stimulation of the ipsilesional premotor cortex may augment this effect, with the largest effects after completion of therapy. The neural mechanisms underlying these effects are manifested in the brain by decreases in the volume of activity globally and in particular regions. Although the number of participants enrolled in this trial precludes definitive conclusions, targeted epidural cortical stimulation appears safe and may be a feasible adjunctive treatment for non-fluent aphasia, particularly when the aphasia is more severe.

Separation of trait and state in stuttering.

PubMed

Connally, Emily L; Ward, David; Pliatsikas, Christos; Finnegan, Sarah; Jenkinson, Mark; Boyles, Rowan; Watkins, Kate E

2018-04-06

Stuttering is a disorder in which the smooth flow of speech is interrupted. People who stutter show structural and functional abnormalities in the speech and motor system. It is unclear whether functional differences reflect general traits of the disorder or are specifically related to the dysfluent speech state. We used a hierarchical approach to separate state and trait effects within stuttering. We collected sparse-sampled functional MRI during two overt speech tasks (sentence reading and picture description) in 17 people who stutter and 16 fluent controls. Separate analyses identified indicators of: (1) general traits of people who stutter; (2) frequency of dysfluent speech states in subgroups of people who stutter; and (3) the differences between fluent and dysfluent states in people who stutter. We found that reduced activation of left auditory cortex, inferior frontal cortex bilaterally, and medial cerebellum were general traits that distinguished fluent speech in people who stutter from that of controls. The stuttering subgroup with higher frequency of dysfluent states during scanning (n = 9) had reduced activation in the right subcortical grey matter, left temporo-occipital cortex, the cingulate cortex, and medial parieto-occipital cortex relative to the subgroup who were more fluent (n = 8). Finally, during dysfluent states relative to fluent ones, there was greater activation of inferior frontal and premotor cortex extending into the frontal operculum, bilaterally. The above differences were seen across both tasks. Subcortical state effects differed according to the task. Overall, our data emphasise the independence of trait and state effects in stuttering. © 2018 The Authors Human Brain Mapping Published by Wiley Periodicals, Inc.

Supporting Students in Making Sense of Connections and in Becoming Perceptually Fluent in Making Connections among Multiple Graphical Representations

ERIC Educational Resources Information Center

Rau, Martina A.; Aleven, Vincent; Rummel, Nikol

2017-01-01

Prior research shows that multiple representations can enhance learning, provided that students make connections among them. We hypothesized that support for connection making is most effective in enhancing learning of domain knowledge if it helps students both in making sense of these connections and in becoming perceptually fluent in making…

Stimulating Conversation: Enhancement of Elicited Propositional Speech in a Patient with Chronic Non-Fluent Aphasia following Transcranial Magnetic Stimulation

ERIC Educational Resources Information Center

Hamilton, Roy H.; Sanders, Linda; Benson, Jennifer; Faseyitan, Olufunsho; Norise, Catherine; Naeser, Margaret; Martin, Paula; Coslett, H. Branch

2010-01-01

Although evidence suggests that patients with left hemisphere strokes and non-fluent aphasia who receive 1Hz repetitive transcranial magnetic stimulation (rTMS) over the intact right inferior frontal gyrus experience persistent benefits in naming, it remains unclear whether the effects of rTMS in these patients generalize to other language…

Using Self- and Parent-Reports to Test the Association between Peer Victimization and Internalizing Symptoms in Verbally Fluent Adolescents with ASD

ERIC Educational Resources Information Center

Adams, Ryan E.; Fredstrom, Bridget K.; Duncan, Amie W.; Holleb, Lauren J.; Bishop, Somer L.

2014-01-01

The current study tested the associations between peer victimization and internalizing symptoms in 54 verbally fluent adolescent males with a diagnosis of autism spectrum disorder. Adolescent- and parent-reports of multiple types of peer victimization and internalizing symptoms were used. First, the validity and reliability of the…

Using Words Instead of Jumbled Characters as Stimuli in Keyboard Training Facilitates Fluent Performance

ERIC Educational Resources Information Center

DeFulio, Anthony; Crone-Todd, Darlene E.; Long, Lauren V.; Nuzzo, Paul A.; Silverman, Kenneth

2011-01-01

Keyboarding skill is an important target for adult education programs due to the ubiquity of computers in modern work environments. A previous study showed that novice typists learned key locations quickly but that fluency took a relatively long time to develop. In the present study, novice typists achieved fluent performance in nearly half the…

Video Self-Modeling Technique That Can Be Used in Improving the Abilities of Fluent Reading and Fluent Speaking

ERIC Educational Resources Information Center

Sen, Ülker

2016-01-01

The use of technology in the field of education makes the educational process more efficient and motivating. Technological tools are used for developing the communication skills of students and teachers in the learning process increasing the participation, supporting the peer, the realization of collaborative learning. The use of technology is…

The Integrity of Anticipatory Coarticulation in Fluent and Non-Fluent Tokens of Adults Who Stutter

ERIC Educational Resources Information Center

Sussman, Harvey M.; Byrd, Courtney T.; Guitar, Barry

2011-01-01

This article analysed the acoustic structure of voiced stop ++ vowel sequences in a group of persons who stutter (PWS). This phonetic unit was chosen because successful production is highly dependent on the differential tweaking of right-to-left anticipatory coarticulation as a function of stop place. Thus, essential elements of both speech motor…

The Role of Interest in Students' Writing Fluency and the Quality of the Product.

ERIC Educational Resources Information Center

Lewis, Dorothy P.

A study was conducted to examine the effects of students' interests on their writing. A group of 571 high school seniors, fluent and nonfluent in writing, completed a questionnaire dealing with aspects of writing interest, such as subject, form, or voice. Tape recorded interviews addressing the same aspects were conducted with 11 fluent seniors…

Masked Priming Effects in Aphasia: Evidence for Altered Automatic Spreading Activation

PubMed Central

Silkes, JoAnn P.; Rogers, Margaret A.

2015-01-01

Purpose Previous research has suggested that impairments of automatic spreading activation may underlie some aphasic language deficits. This study further investigated the status of automatic spreading activation in individuals with aphasia as compared with typical adults. Method Participants were 21 individuals with aphasia (12 fluent, 9 non-fluent) and 31 typical adults. Reaction time data were collected on a lexical decision task with masked repetition primes, assessed at 11 different interstimulus intervals (ISIs). Masked primes were used to assess automatic spreading activation without the confound of conscious processing. The various ISIs were used to assess the time to onset, and duration, of priming effects. Results The control group showed maximal priming in the 200 ms ISI condition, with significant priming at a range of ISIs surrounding that peak. Participants with both fluent and non-fluent aphasia showed maximal priming effects in the 250 ms ISI condition, and primed across a smaller range of ISIs than the control group. Conclusions Results suggest that individuals with aphasia have slowed automatic spreading activation, and impaired maintenance of activation over time, regardless of fluency classification. These findings have implications for understanding aphasic language impairment and for development of aphasia treatments designed directly address automatic language processes. PMID:22411281

An Analysis of the Effect of Knowledge Management on the Execution of Simplified Acquisition Procedures

DTIC Science & Technology

2012-12-27

of Work UCC Uniform Commercial Code USD(AT&L) Under Secretary of Defense for Acquisition, Technology, and Logistics WBS Work Breakdown Structure...intensive career field. The FAR, the DFARS, and other federal agency supplements of the FAR, the Uniform Commercial Code ( UCC ), installation guidelines

Slowed articulation rate is a sensitive diagnostic marker for identifying non-fluent primary progressive aphasia

PubMed Central

Cordella, Claire; Dickerson, Bradford C.; Quimby, Megan; Yunusova, Yana; Green, Jordan R.

2016-01-01

Background Primary progressive aphasia (PPA) is a neurodegenerative aphasic syndrome with three distinct clinical variants: non-fluent (nfvPPA), logopenic (lvPPA), and semantic (svPPA). Speech (non-) fluency is a key diagnostic marker used to aid identification of the clinical variants, and researchers have been actively developing diagnostic tools to assess speech fluency. Current approaches reveal coarse differences in fluency between subgroups, but often fail to clearly differentiate nfvPPA from the variably fluent lvPPA. More robust subtype differentiation may be possible with finer-grained measures of fluency. Aims We sought to identify the quantitative measures of speech rate—including articulation rate and pausing measures—that best differentiated PPA subtypes, specifically the non-fluent group (nfvPPA) from the more fluent groups (lvPPA, svPPA). The diagnostic accuracy of the quantitative speech rate variables was compared to that of a speech fluency impairment rating made by clinicians. Methods and Procedures Automatic estimates of pause and speech segment durations and rate measures were derived from connected speech samples of participants with PPA (N=38; 11 nfvPPA, 14 lvPPA, 13 svPPA) and healthy age-matched controls (N=8). Clinician ratings of fluency impairment were made using a previously validated clinician rating scale developed specifically for use in PPA. Receiver operating characteristic (ROC) analyses enabled a quantification of diagnostic accuracy. Outcomes and Results Among the quantitative measures, articulation rate was the most effective for differentiating between nfvPPA and the more fluent lvPPA and svPPA groups. The diagnostic accuracy of both speech and articulation rate measures was markedly better than that of the clinician rating scale, and articulation rate was the best classifier overall. Area under the curve (AUC) values for articulation rate were good to excellent for identifying nfvPPA from both svPPA (AUC=.96) and lvPPA (AUC=.86). Cross-validation of accuracy results for articulation rate showed good generalizability outside the training dataset. Conclusions Results provide empirical support for (1) the efficacy of quantitative assessments of speech fluency and (2) a distinct non-fluent PPA subtype characterized, at least in part, by an underlying disturbance in speech motor control. The trend toward improved classifier performance for quantitative rate measures demonstrates the potential for a more accurate and reliable approach to subtyping in the fluency domain, and suggests that articulation rate may be a useful input variable as part of a multi-dimensional clinical subtyping approach. PMID:28757671

Speech Skill Learning of Persons Who Stutter and Fluent Speakers under Single and Dual Task Conditions

ERIC Educational Resources Information Center

Smits-Bandstra, Sarah; De Nil, Luc

2009-01-01

Two studies compared the accuracy and efficiency of initiating oral reading of nonsense syllables by persons who stutter (PWS) and fluent speakers (PNS) over practise. Findings of Study One, comparing 12 PWS and 12 PNS, replicated previous findings of slow speech sequence initiation over practise by PWS relative to PNS. In Study Two, nine PWS and…

The Impact of Input Quality on Early Sign Development in Native and Non-Native Language Learners

ERIC Educational Resources Information Center

Lu, Jenny; Jones, Anna; Morgan, Gary

2016-01-01

There is debate about how input variation influences child language. Most deaf children are exposed to a sign language from their non-fluent hearing parents and experience a delay in exposure to accessible language. A small number of children receive language input from their deaf parents who are fluent signers. Thus it is possible to document the…

Cultivating Culturally Fluent Leaders for the Future of Kinesiology. 2016 NAKHE Hally Beth Poindexter Young Scholar Award

ERIC Educational Resources Information Center

James-Hassan, Martha J.

2016-01-01

This article posits that each content area that falls under the umbrella of kinesiology must develop a future cadre of professionals who are competent in their content knowledge and are trained as leaders who are able to understand the essential impacts of culture on their work. The intentional development of culturally fluent leaders should be a…

Case Study on the Effect of Word Repetition Method Supported by Neurological Affecting Model on Fluent Reading

ERIC Educational Resources Information Center

Duran, Erol

2013-01-01

This research is a case study which is a qualitative study model and named as example event as well. The purpose of this research is determining the effect of word repetitive reading method supported with neurological affecting model on fluent reading. In this study, False Analysis Inventory was used in order to determine the student's oral…

Implementation of Energy Code Controls Requirements in New Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, Michael I.; Hart, Philip R.; Hatten, Mike

Most state energy codes in the United States are based on one of two national model codes; ANSI/ASHRAE/IES 90.1 (Standard 90.1) or the International Code Council (ICC) International Energy Conservation Code (IECC). Since 2004, covering the last four cycles of Standard 90.1 updates, about 30% of all new requirements have been related to building controls. These requirements can be difficult to implement and verification is beyond the expertise of most building code officials, yet the assumption in studies that measure the savings from energy codes is that they are implemented and working correctly. The objective of the current research ismore » to evaluate the degree to which high impact controls requirements included in commercial energy codes are properly designed, commissioned and implemented in new buildings. This study also evaluates the degree to which these control requirements are realizing their savings potential. This was done using a three-step process. The first step involved interviewing commissioning agents to get a better understanding of their activities as they relate to energy code required controls measures. The second involved field audits of a sample of commercial buildings to determine whether the code required control measures are being designed, commissioned and correctly implemented and functioning in new buildings. The third step includes compilation and analysis of the information gather during the first two steps. Information gathered during these activities could be valuable to code developers, energy planners, designers, building owners, and building officials.« less

Program ratings do not predict negative content in commercials on children's channels.

PubMed

Dale, Lourdes P; Klein, Jordana; DiLoreto, James; Pidano, Anne E; Borto, Jolanta W; McDonald, Kathleen; Olson, Heather; Neace, William P

2011-01-01

The aim of this study was to determine the presence of negative content in commercials airing on 3 children's channels (Disney Channel, Nickelodeon, and Cartoon Network). The 1681 commercials were coded with a reliable coding system and content comparisons were made. Although the majority of the commercials were coded as neutral, negative content was present in 13.5% of commercials. This rate was significantly more than the predicted value of zero and more similar to the rates cited in previous research examining content during sporting events. The rate of negative content was less than, but not significantly different from, the rate of positive content. Thus, our findings did not support our hypothesis that there would be more commercials with positive content than with negative content. Logistic regression analysis indicated that channel, and not rating, was a better predictor of the presence of overall negative content and the presence of violent behaviors. Commercials airing on the Cartoon Network had significantly more negative content, and those airing on Disney Channel had significantly less negative content than the other channels. Within the individual channels, program ratings did not relate to the presence of negative content. Parents cannot assume the content of commercials will be consistent with the program rating or label. Pediatricians and psychologists should educate parents about the potential for negative content in commercials and advocate for a commercials rating system to ensure that there is greater parity between children's programs and the corresponding commercials.

Gestural recovery and the role of forward and reversed syllabic repetitions as stuttering inhibitors in adults.

PubMed

Kalinowski, Joseph; Saltuklaroglu, Tim; Guntupalli, Vijaya; Stuart, Andrew

2004-06-10

Instead of being the core stuttering 'problem', syllabic repetitions may be a biological mechanism, or 'solution', to the central involuntary stuttering block. Simply put, stuttering is an endogenous transitory state of 'shadowed speech', a choral speech derivative that allows for a neural release of the central block. To investigate this possibility, 14 adults who stutter read while listening to forward fluent speech, reversed fluent speech, forward stuttered speech, and reversed stuttered speech. All conditions induced significant degrees of stuttering inhibition when compared to a control condition. However, the reversed fluent condition was less powerful than the other three conditions ( approximately 42% vs. approximately 65%) for inhibiting stuttering. Stuttering inhibition appears to proceed by 'gestural recovery', made possible by the presence of an exogenous or 'second' set of speech gestures and engagement of mirror neurons. When reversed fluent speech was used, violations in normal gesture-time relationships (i.e., normal speech entropy) resulted in gestural configurations that apparently were inadequately recovered, and therefore, were not as conducive to high levels of stuttering inhibition. In contrast, high levels of encoding found in the simple syllabic structures of stuttered speech allowed its forward and reversed forms to be equally effective for gestural recovery and stuttering inhibition. The reversal of repeated syllables did not appear to significantly degrade the natural gesture-time relationships (i.e., they were perceptually recognizable). Thus, exogenous speech gestures that displayed near normal gestural relationships allowed for easy recovery and fluent productions via mirror systems, suggesting a more choral-like nature. The importance of syllabic repetitions is highlighted: both their perceived (exogenous) and produced (endogenous) forms appear to be fundamental, surface acoustic manifestations for central stuttering inhibition via the engagement of mirror neurons.

Treatment of word-finding deficits in fluent aphasia through the manipulation of spatial attention: Preliminary findings

PubMed Central

Dotson, Vonetta M.; Singletary, Floris; Fuller, Renee; Koehler, Shirley; Moore, Anna Bacon; Gonzalez Rothi, Leslie J.; Crosson, Bruce

2010-01-01

Background Attention, the processing of one source of information to the exclusion of others, is important for most cognitive processes, including language. Evidence suggests not only that dysfunctional attention mechanisms contribute to language deficits after stroke, but also that orienting attention to a patient's ipsilesional hemispace recruits attention mechanisms in the intact hemisphere and improves language functions in some persons with aphasia. Aims The aim of the current research was to offer proof of concept for the strategy of improving picture-naming performance in fluent aphasia by moving stimuli into the left hemispace. It was hypothesised that repeated orientation of attention to the ipsilesional hemispace during picture naming would lead to improved naming accuracy for participants with fluent aphasia. Methods & Procedures Three participants with stable fluent aphasia received daily treatment sessions that consisted of naming simple line drawings presented 45 degrees to the left of body midline on a computer monitor. Naming probes were administered before initiation of the treatment protocol to establish a baseline, and before each treatment session to measure change during treatment. The C statistic was used to establish the stability of baseline performance and to determine whether the slope of the treatment phases differed significantly from the slope of the baseline. Outcomes & Results Two of the three participants showed significant improvement over baseline performance in the percent correct of naming probes. One participant showed no improvement over baseline accuracy. Conclusions Results suggest that engaging right-hemisphere attention mechanisms may improve naming accuracy in some people with fluent aphasia. Findings justify further investigation of this treatment in a larger controlled study. PMID:22131638

Analysis of Drafting Effects in Swimming Using Computational Fluid Dynamics

PubMed Central

Silva, António José; Rouboa, Abel; Moreira, António; Reis, Victor Machado; Alves, Francisco; Vilas-Boas, João Paulo; Marinho, Daniel Almeida

2008-01-01

The purpose of this study was to determine the effect of drafting distance on the drag coefficient in swimming. A k-epsilon turbulent model was implemented in the commercial code Fluent® and applied to the fluid flow around two swimmers in a drafting situation. Numerical simulations were conducted for various distances between swimmers (0.5-8.0 m) and swimming velocities (1.6-2.0 m.s-1). Drag coefficient (Cd) was computed for each one of the distances and velocities. We found that the drag coefficient of the leading swimmer decreased as the flow velocity increased. The relative drag coefficient of the back swimmer was lower (about 56% of the leading swimmer) for the smallest inter-swimmer distance (0.5 m). This value increased progressively until the distance between swimmers reached 6.0 m, where the relative drag coefficient of the back swimmer was about 84% of the leading swimmer. The results indicated that the Cd of the back swimmer was equal to that of the leading swimmer at distances ranging from 6.45 to 8. 90 m. We conclude that these distances allow the swimmers to be in the same hydrodynamic conditions during training and competitions. Key pointsThe drag coefficient of the leading swimmer decreased as the flow velocity increased.The relative drag coefficient of the back swimmer was least (about 56% of the leading swimmer) for the smallest inter-swimmer distance (0.5 m).The drag coefficient values of both swimmers in drafting were equal to distances ranging between 6.45 m and 8.90 m, considering the different flow velocities.The numerical simulation techniques could be a good approach to enable the analysis of the fluid forces around objects in water, as it happens in swimming. PMID:24150135

Thermal Dispersion Within a Porous Medium Near a Solid Wall

NASA Technical Reports Server (NTRS)

Simon, T.; McFadden, G.; Ibrahim, M.

2006-01-01

The regenerator is a key component to Stirling cycle machine efficiency. Typical regenerators are of sintered fine wires or layers of fine-wire screens. Such porous materials are contained within solid-waH casings. Thermal energy exchange between the regenerator and the casing is important to cycle performance for the matrix and casing would not have the same axial temperature profile in an actual machine. Exchange from one to the other may allow shunting of thermal energy, reducing cycle efficiency. In this paper, temperature profiles within the near-wall region of the matrix are measured and thermal energy transport, termed thermal dispersion, is inferred. The data show how the wall affects thermal transport. Transport normal to the mean flow direction is by conduction within the solid and fluid and by advective transport within the matrix. In the near-wall region, both may be interrupted from their normal in-core pattern. Solid conduction paths are broken and scales of advective transport are damped. An equation is presented which describes this change for a wire screen mesh. The near-wall layer typically acts as an insulating layer. This should be considered in design or analysis. Effective thermal conductivity within the core is uniform. In-core transverse thermal effective conductivity values are compared to direct and indirect measurements reported elsewhere and to 3D numerical simulation results, computed previously and reported elsewhere. The 3-D CFD model is composed of six cylinders in cross flow, staggered in arrangement to match the dimensions and porosity of the matrix used in the experiments. The commercial code FLUENT is used to obtain the flow and thermal fields. The thermal dispersion and effective thermal conductivities for the matrix are computed from the results.

Three-dimensional flows in a hyperelastic vessel under external pressure.

PubMed

Zhang, Sen; Luo, Xiaoyu; Cai, Zongxi

2018-05-09

We study the collapsible behaviour of a vessel conveying viscous flows subject to external pressure, a scenario that could occur in many physiological applications. The vessel is modelled as a three-dimensional cylindrical tube of nonlinear hyperelastic material. To solve the fully coupled fluid-structure interaction, we have developed a novel approach based on the Arbitrary Lagrangian-Eulerian (ALE) method and the frontal solver. The method of rotating spines is used to enable an automatic mesh adaptation. The numerical code is verified extensively with published results and those obtained using the commercial packages in simpler cases, e.g. ANSYS for the structure with the prescribed flow, and FLUENT for the fluid flow with prescribed structure deformation. We examine three different hyperelastic material models for the tube for the first time in this context and show that at the small strain, all three material models give similar results. However, for the large strain, results differ depending on the material model used. We further study the behaviour of the tube under a mode-3 buckling and reveal its complex flow patterns under various external pressures. To understand these flow patterns, we show how energy dissipation is associated with the boundary layers created at the narrowest collapsed section of the tube, and how the transverse flow forms a virtual sink to feed a strong axial jet. We found that the energy dissipation associated with the recirculation does not coincide with the flow separation zone itself, but overlaps with the streamlines that divide the three recirculation zones. Finally, we examine the bifurcation diagrams for both mode-3 and mode-2 collapses and reveal that multiple solutions exist for a range of the Reynolds number. Our work is a step towards modelling more realistic physiological flows in collapsible arteries and veins.

A Computational Study for the Utilization of Jet Pulsations in Gas Turbine Film Cooling and Flow Control

NASA Technical Reports Server (NTRS)

Kartuzova, Olga V.

2012-01-01

This report is the second part of a three-part final report of research performed under an NRA cooperative Agreement contract. The first part is NASA/CR-2012-217415. The third part is NASA/CR-2012-217417. Jets have been utilized in various turbomachinery applications in order to improve gas turbines performance. Jet pulsation is a promising technique because of the reduction in the amount of air removed from compressor. In this work two areas of pulsed jets applications were computationally investigated using the commercial code Fluent (ANSYS, Inc.); the first one is film cooling of High Pressure Turbine (HPT) blades and second one is flow separation control over Low Pressure Turbine (LPT) airfoil using Vortex Generator Jets (VGJ). Using pulsed jets for film cooling purposes can help to improve the effectiveness and thus allow higher turbine inlet temperature. Effects of the film hole geometry, blowing ratio and density ratio of the jet, pulsation frequency and duty cycle of blowing on the film cooling effectiveness were investigated. As for the low-pressure turbine (LPT) stages, the boundary layer separation on the suction side of airfoils can occur due to strong adverse pressure gradients. The problem is exacerbated as airfoil loading is increased. Active flow control could provide a means for minimizing separation under conditions where it is most severe (low Reynolds number), without causing additional losses under other conditions (high Reynolds number). The effects of the jet geometry, blowing ratio, density ratio, pulsation frequency and duty cycle on the size of the separated region were examined in this work. The results from Reynolds Averaged Navier-Stokes and Large Eddy Simulation computational approaches were compared with the experimental data.

Evaluation of subgrid-scale models in large-eddy simulations of turbulent flow in a centrifugal pump impeller

NASA Astrophysics Data System (ADS)

Yang, Zhengjun; Wang, Fujun; Zhou, Peijian

2012-09-01

The current research of large eddy simulation (LES) of turbulent flow in pumps mainly concentrates in applying conventional subgrid-scale (SGS) model to simulate turbulent flow, which aims at obtaining the flow field in pump. The selection of SGS model is usually not considered seriously, so the accuracy and efficiency of the simulation cannot be ensured. Three SGS models including Smagorinsky-Lilly model, dynamic Smagorinsky model and dynamic mixed model are comparably studied by using the commercial CFD code Fluent combined with its user define function. The simulations are performed for the turbulent flow in a centrifugal pump impeller. The simulation results indicate that the mean flows predicted by the three SGS models agree well with the experimental data obtained from the test that detailed measurements of the flow inside the rotating passages of a six-bladed shrouded centrifugal pump impeller performed using particle image velocimetry (PIV) and laser Doppler velocimetry (LDV). The comparable results show that dynamic mixed model gives the most accurate results for mean flow in the centrifugal pump impeller. The SGS stress of dynamic mixed model is decompose into the scale similar part and the eddy viscous part. The scale similar part of SGS stress plays a significant role in high curvature regions, such as the leading edge and training edge of pump blade. It is also found that the dynamic mixed model is more adaptive to compute turbulence in the pump impeller. The research results presented is useful to improve the computational accuracy and efficiency of LES for centrifugal pumps, and provide important reference for carrying out simulation in similar fluid machineries.

CFD Analysis of the Aerodynamics of a Business-Jet Airfoil with Leading-Edge Ice Accretion

NASA Technical Reports Server (NTRS)

Chi, X.; Zhu, B.; Shih, T. I.-P.; Addy, H. E.; Choo, Y. K.

2004-01-01

For rime ice - where the ice buildup has only rough and jagged surfaces but no protruding horns - this study shows two dimensional CFD analysis based on the one-equation Spalart-Almaras (S-A) turbulence model to predict accurately the lift, drag, and pressure coefficients up to near the stall angle. For glaze ice - where the ice buildup has two or more protruding horns near the airfoil's leading edge - CFD predictions were much less satisfactory because of the large separated region produced by the horns even at zero angle of attack. This CFD study, based on the WIND and the Fluent codes, assesses the following turbulence models by comparing predictions with available experimental data: S-A, standard k-epsilon, shear-stress transport, v(exp 2)-f, and differential Reynolds stress.

Cloud Computing for Complex Performance Codes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Appel, Gordon John; Hadgu, Teklu; Klein, Brandon Thorin

This report describes the use of cloud computing services for running complex public domain performance assessment problems. The work consisted of two phases: Phase 1 was to demonstrate complex codes, on several differently configured servers, could run and compute trivial small scale problems in a commercial cloud infrastructure. Phase 2 focused on proving non-trivial large scale problems could be computed in the commercial cloud environment. The cloud computing effort was successfully applied using codes of interest to the geohydrology and nuclear waste disposal modeling community.

Speech Motor Control in Fluent and Dysfluent Speech Production of an Individual with Apraxia of Speech and Broca's Aphasia

ERIC Educational Resources Information Center

van Lieshout, Pascal H. H. M.; Bose, Arpita; Square, Paula A.; Steele, Catriona M.

2007-01-01

Apraxia of speech (AOS) is typically described as a motor-speech disorder with clinically well-defined symptoms, but without a clear understanding of the underlying problems in motor control. A number of studies have compared the speech of subjects with AOS to the fluent speech of controls, but only a few have included speech movement data and if…

Input Files and Procedures for Analysis of SMA Hybrid Composite Beams in MSC.Nastran and ABAQUS

NASA Technical Reports Server (NTRS)

Turner, Travis L.; Patel, Hemant D.

2005-01-01

A thermoelastic constitutive model for shape memory alloys (SMAs) and SMA hybrid composites (SMAHCs) was recently implemented in the commercial codes MSC.Nastran and ABAQUS. The model is implemented and supported within the core of the commercial codes, so no user subroutines or external calculations are necessary. The model and resulting structural analysis has been previously demonstrated and experimentally verified for thermoelastic, vibration and acoustic, and structural shape control applications. The commercial implementations are described in related documents cited in the references, where various results are also shown that validate the commercial implementations relative to a research code. This paper is a companion to those documents in that it provides additional detail on the actual input files and solution procedures and serves as a repository for ASCII text versions of the input files necessary for duplication of the available results.

School Competence and Fluent Academic Performance: Informing Assessment of Educational Outcomes in Survivors of Pediatric Medulloblastoma.

PubMed

Holland, Alice Ann; Hughes, Carroll W; Stavinoha, Peter L

2015-01-01

Academic difficulties are widely acknowledged but not adequately studied in survivors of pediatric medulloblastoma. Although most survivors require special education services and are significantly less likely than healthy peers to finish high school, measured academic skills are typically average. This study sought to identify potential factors associated with academic difficulties in this population and focused on school competence and fluent academic performance. Thirty-six patients (ages 7-18 years old) were recruited through the Departments of Neurosurgery and Neuro-Oncology at Children's Medical Center Dallas and Cook Children's Medical Center in Fort Worth, TX. Participants completed a neuropsychological screening battery including selected Woodcock-Johnson III Tests of Achievement subtests. Parents completed the Child Behavior Checklist. School competence was significantly correlated with measured academic skills and fluency. Basic academic skill development was broadly average, in contrast to significantly worse fluent academic performance. School competence may have utility as a measure estimating levels of educational success in this population. Additionally, academic difficulties experienced by childhood medulloblastoma survivors may be better captured by measuring deficits in fluent academic performance rather than skills. Identification of these potential factors associated with educational outcomes of pediatric medulloblastoma survivors has significant implications for research, clinical assessment, and academic services/interventions.

Rhythm in disguise: why singing may not hold the key to recovery from aphasia

PubMed Central

Kotz, Sonja A.; Henseler, Ilona; Turner, Robert; Geyer, Stefan

2011-01-01

The question of whether singing may be helpful for stroke patients with non-fluent aphasia has been debated for many years. However, the role of rhythm in speech recovery appears to have been neglected. In the current lesion study, we aimed to assess the relative importance of melody and rhythm for speech production in 17 non-fluent aphasics. Furthermore, we systematically alternated the lyrics to test for the influence of long-term memory and preserved motor automaticity in formulaic expressions. We controlled for vocal frequency variability, pitch accuracy, rhythmicity, syllable duration, phonetic complexity and other relevant factors, such as learning effects or the acoustic setting. Contrary to some opinion, our data suggest that singing may not be decisive for speech production in non-fluent aphasics. Instead, our results indicate that rhythm may be crucial, particularly for patients with lesions including the basal ganglia. Among the patients we studied, basal ganglia lesions accounted for more than 50% of the variance related to rhythmicity. Our findings therefore suggest that benefits typically attributed to melodic intoning in the past could actually have their roots in rhythm. Moreover, our data indicate that lyric production in non-fluent aphasics may be strongly mediated by long-term memory and motor automaticity, irrespective of whether lyrics are sung or spoken. PMID:21948939

Energy Savings Analysis of the Proposed NYStretch-Energy Code 2018

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Bing; Zhang, Jian; Chen, Yan

This study was conducted by the Pacific Northwest National Laboratory (PNNL) in support of the stretch energy code development led by the New York State Energy Research and Development Authority (NYSERDA). In 2017 NYSERDA developed its 2016 Stretch Code Supplement to the 2016 New York State Energy Conservation Construction Code (hereinafter referred to as “NYStretch-Energy”). NYStretch-Energy is intended as a model energy code for statewide voluntary adoption that anticipates other code advancements culminating in the goal of a statewide Net Zero Energy Code by 2028. Since then, NYSERDA continues to develop the NYStretch-Energy Code 2018 edition. To support the effort,more » PNNL conducted energy simulation analysis to quantify the energy savings of proposed commercial provisions of the NYStretch-Energy Code (2018) in New York. The focus of this project is the 20% improvement over existing commercial model energy codes. A key requirement of the proposed stretch code is that it be ‘adoptable’ as an energy code, meaning that it must align with current code scope and limitations, and primarily impact building components that are currently regulated by local building departments. It is largely limited to prescriptive measures, which are what most building departments and design projects are most familiar with. This report describes a set of energy-efficiency measures (EEMs) that demonstrate 20% energy savings over ANSI/ASHRAE/IES Standard 90.1-2013 (ASHRAE 2013) across a broad range of commercial building types and all three climate zones in New York. In collaboration with New Building Institute, the EEMs were developed from national model codes and standards, high-performance building codes and standards, regional energy codes, and measures being proposed as part of the on-going code development process. PNNL analyzed these measures using whole building energy models for selected prototype commercial buildings and multifamily buildings representing buildings in New York. Section 2 of this report describes the analysis methodology, including the building types and construction area weights update for this analysis, the baseline, and the method to conduct the energy saving analysis. Section 3 provides detailed specifications of the EEMs and bundles. Section 4 summarizes the results of individual EEMs and EEM bundles by building type, energy end-use and climate zone. Appendix A documents detailed descriptions of the selected prototype buildings. Appendix B provides energy end-use breakdown results by building type for both the baseline code and stretch code in all climate zones.« less

Secured Transactions: An Integrated Classroom Approach Using Financial Statements and Acronyms

ERIC Educational Resources Information Center

Seganish, W. Michael

2005-01-01

Students struggle with the subject of secured transactions under the Uniform Commercial Code. In this article, the author presents a method that uses balance-sheet information to help students visualize the difference between secured and unsecured creditors. The balance sheet is also used in the Uniform Commercial Code process, in which one must…

12 CFR Appendix A to Subpart B of... - Commentary

Code of Federal Regulations, 2014 CFR

2014-01-01

...,” as defined in section 4A-501(b) of Article 4A, Funds Transfers, of the Uniform Commercial Code (UCC... refers to other provisions of the Uniform Commercial Code, e.g., definitions in article 1 of the UCC, these other provisions of the UCC, as approved by the National Conference of Commissioners on Uniform...

12 CFR Appendix A to Subpart B of... - Commentary

Code of Federal Regulations, 2010 CFR

2010-01-01

...,” as defined in section 4A-501(b) of Article 4A, Funds Transfers, of the Uniform Commercial Code (UCC... refers to other provisions of the Uniform Commercial Code, e.g., definitions in Article 1 of the UCC, these other provisions of the UCC, as approved by the National Conference of Commissioners on Uniform...

12 CFR Appendix A to Subpart B of... - Commentary

Code of Federal Regulations, 2011 CFR

2011-01-01

...,” as defined in section 4A-501(b) of Article 4A, Funds Transfers, of the Uniform Commercial Code (UCC... refers to other provisions of the Uniform Commercial Code, e.g., definitions in Article 1 of the UCC, these other provisions of the UCC, as approved by the National Conference of Commissioners on Uniform...

12 CFR Appendix A to Subpart B of... - Commentary

Code of Federal Regulations, 2013 CFR

2013-01-01

...,” as defined in section 4A-501(b) of Article 4A, Funds Transfers, of the Uniform Commercial Code (UCC... refers to other provisions of the Uniform Commercial Code, e.g., definitions in article 1 of the UCC, these other provisions of the UCC, as approved by the National Conference of Commissioners on Uniform...

12 CFR Appendix A to Subpart B of... - Commentary

Code of Federal Regulations, 2012 CFR

2012-01-01

...,” as defined in section 4A-501(b) of Article 4A, Funds Transfers, of the Uniform Commercial Code (UCC... refers to other provisions of the Uniform Commercial Code, e.g., definitions in Article 1 of the UCC, these other provisions of the UCC, as approved by the National Conference of Commissioners on Uniform...

Verification of ANSYS Fluent and OpenFOAM CFD platforms for prediction of impact flow

NASA Astrophysics Data System (ADS)

Tisovská, Petra; Peukert, Pavel; Kolář, Jan

The main goal of the article is a verification of the heat transfer coefficient numerically predicted by two CDF platforms - ANSYS-Fluent and OpenFOAM on the problem of impact flows oncoming from 2D nozzle. Various mesh parameters and solver settings were tested under several boundary conditions and compared to known experimental results. The best solver setting, suitable for further optimization of more complex geometry is evaluated.

How fluent is the fluent speech of people who stutter? A new approach to measuring kinematics with ultrasound.

PubMed

Heyde, Cornelia J; Scobbie, James M; Lickley, Robin; Drake, Eleanor K E

2016-01-01

We present a new approach to the investigation of dynamic ultrasound tongue imaging (UTI) data, applied here to analyse the subtle aspects of the fluency of people who stutter (PWS). Fluent productions of CV syllables (C = /k/; V = /ɑ, i, ə/) from three PWS and three control speakers (PNS) were analysed for duration and peak velocity relative to articulatory movement towards (onset) and away from (offset) the consonantal closure. The objective was to apply a replicable methodology for kinematic investigation to speech of PWS in order to test Wingate's Fault-Line hypothesis. As was hypothesised, results show comparable onset behaviours for both groups. Regarding offsets, groups differ in peak velocity. Results suggest that PWS do not struggle initiating consonantal closure (onset). In transition from consonantal closure into the vowel, however, groups appear to employ different strategies expressed in increased variation (PNS) versus decreased mean peak velocity (PWS).

Early-stage chunking of finger tapping sequences by persons who stutter and fluent speakers.

PubMed

Smits-Bandstra, Sarah; De Nil, Luc F

2013-01-01

This research note explored the hypothesis that chunking differences underlie the slow finger-tap sequencing performance reported in the literature for persons who stutter (PWS) relative to fluent speakers (PNS). Early-stage chunking was defined as an immediate and spontaneous tendency to organize a long sequence into pauses, for motor planning, and chunks of fluent motor performance. A previously published study in which 12 PWS and 12 matched PNS practised a 10-item finger tapping sequence 30 times was examined. Both groups significantly decreased the duration of between-chunk intervals (BCIs) and within-chunk intervals (WCIs) over practice. PNS had significantly shorter WCIs relative to PWS, but minimal differences between groups were found for the number of, or duration of, BCI. Results imply that sequencing differences found between PNS and PWS may be due to differences in automatizing movements within chunks or retrieving chunks from memory rather than chunking per se.

Production, formulation and cost estimation of a commercial biosurfactant.

PubMed

Soares da Silva, Rita de Cássia Freire; de Almeida, Darne Germano; Brasileiro, Pedro Pinto Ferreira; Rufino, Raquel Diniz; de Luna, Juliana Moura; Sarubbo, Leonie Asfora

2018-05-03

Due to their amphipathic nature, biosurfactants are multifunctional molecules that have considerable potential in several industries, especially the petroleum industry. In this study, the commercial production of a biosurfactant from Pseudomonas cepacia CCT6659 grown on industrial waste was investigated in a semi-industrial 50-L bioreactor for use in the removal of hydrocarbons from oily effluents. A concentration of 40.5 g/L was achieved in the scale up and the surface tension was reduced to 29 mN/m. The biosurfactant was formulated with an added preservative, tyndallization and the combination of fluent vaporization plus the preservative. Formulated biosurfactant samples were stored for 120 days. Tensioactive properties and stability were evaluated with different pH values, temperatures and salt concentrations. The commercial biosurfactant obtained with all formulation methods demonstrated good stability, with tolerance to a wide range of pH values as well as high temperature and high salinity, enabling application in extreme environmental conditions, as it occurs in industrial plants. The biosurfactant proved to be economically viable for large-scale application, as demonstrated by the cost of the product, estimated at around US$ 0.14-0.15/L and US$ 0.02/g for the formulated and the isolated biosurfactant, respectively. Both products were applied in an oil-fired thermoelectric plant for the treatment of oily effluents and removed up to 100% of the oil. Therefore, this biosurfactant is suitable for application under extreme conditions, such as in the petroleum industry, and can be produced at a more attractive price compared to other commercially available products on the market.

78 FR 27906 - Lead; Renovation, Repair, and Painting Program for Public and Commercial Buildings; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

... construction (NAICS code 236), e.g., commercial building construction, industrial building construction, commercial and institutional building construction, building finishing contractors, drywall and insulation... Lead; Renovation, Repair, and Painting Program for Public and Commercial Buildings; Notice of Public...

Remarks on CFD validation: A Boeing Commercial Airplane Company perspective

NASA Technical Reports Server (NTRS)

Rubbert, Paul E.

1987-01-01

Requirements and meaning of validation of computational fluid dynamics codes are discussed. Topics covered include: validating a code, validating a user, and calibrating a code. All results are presented in viewgraph format.

Differences of Articulation Rate and Utterance Length in Fluent and Disfluent Utterances of Preschool Children Who Stutter

PubMed Central

Chon, HeeCheong; Sawyer, Jean; Ambrose, Nicoline G.

2014-01-01

Purpose The purpose of this study was to investigate characteristics of four types of utterances in preschool children who stutter: perceptually fluent, containing normal disfluencies (OD utterance), containing stuttering-like disfluencies (SLD utterance), and containing both normal and stuttering-like disfluencies (SLD+OD utterance). Articulation rate and length of utterance were measured to seek the differences. Because articulation rate may reflect temporal aspects of speech motor control, it was predicted that the articulation rate would be different between perceptually fluent utterances and utterances containing disfluencies. The length of utterance was also expected to show different patterns. Method Participants were 14 preschool children who stutter. Disfluencies were identified from their spontaneous speech samples, and articulation rate in syllables per second and utterance length in syllables were measured for the four types of utterances. Results and discussion There was no significant difference in articulation rate between each type of utterance. Significantly longer utterances were found only in SLD+OD utterances compared to fluent utterances, suggesting that utterance length may be related to efforts in executing motor as well as linguistic planning. The SLD utterance revealed a significant negative correlation in that longer utterances tended to be slower in articulation rates. Longer utterances may place more demand on speech motor control due to more linguistic and/or grammatical features, resulting in stuttering-like disfluencies and a decreased rate. PMID:22995336

Phonation interval modification and speech performance quality during fluency-inducing conditions by adults who stutter

PubMed Central

Ingham, Roger J.; Bothe, Anne K.; Wang, Yuedong; Purkhiser, Krystal; New, Anneliese

2012-01-01

Purpose To relate changes in four variables previously defined as characteristic of normally fluent speech to changes in phonatory behavior during oral reading by persons who stutter (PWS) and normally fluent controls under multiple fluency-inducing (FI) conditions. Method Twelve PWS and 12 controls each completed 4 ABA experiments. During A phases, participants read normally. B phases were 4 different FI conditions: auditory masking, chorus reading, whispering, and rhythmic stimulation. Dependent variables were the durations of accelerometer-recorded phonated intervals; self-judged speech effort; and observer-judged stuttering frequency, speech rate, and speech naturalness. The method enabled a systematic replication of Ingham et al. (2009). Results All FI conditions resulted in decreased stuttering and decreases in the number of short phonated intervals, as compared with baseline conditions, but the only FI condition that satisfied all four characteristics of normally fluent speech was chorus reading. Increases in longer phonated intervals were associated with decreased stuttering but also with poorer naturalness and/or increased speech effort. Previous findings concerning the effects of FI conditions on speech naturalness and effort were replicated. Conclusions Measuring all relevant characteristics of normally fluent speech, in the context of treatments that aim to reduce the occurrence of short-duration PIs, may aid the search for an explanation of the nature of stuttering and may also maximize treatment outcomes for adults who stutter. PMID:22365886

28 CFR 36.607 - Guidance concerning model codes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 1 2013-07-01 2013-07-01 false Guidance concerning model codes. 36.607... BY PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.607 Guidance concerning model codes. Upon application by an authorized representative of a...

28 CFR 36.607 - Guidance concerning model codes.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 1 2014-07-01 2014-07-01 false Guidance concerning model codes. 36.607... BY PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.607 Guidance concerning model codes. Upon application by an authorized representative of a...

28 CFR 36.607 - Guidance concerning model codes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 1 2012-07-01 2012-07-01 false Guidance concerning model codes. 36.607... BY PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.607 Guidance concerning model codes. Upon application by an authorized representative of a...

28 CFR 36.607 - Guidance concerning model codes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 1 2011-07-01 2011-07-01 false Guidance concerning model codes. 36.607... BY PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.607 Guidance concerning model codes. Upon application by an authorized representative of a...

Evaluating the benefits of commercial building energy codes and improving federal incentives for code adoption.

PubMed

Gilbraith, Nathaniel; Azevedo, Inês L; Jaramillo, Paulina

2014-12-16

The federal government has the goal of decreasing commercial building energy consumption and pollutant emissions by incentivizing the adoption of commercial building energy codes. Quantitative estimates of code benefits at the state level that can inform the size and allocation of these incentives are not available. We estimate the state-level climate, environmental, and health benefits (i.e., social benefits) and reductions in energy bills (private benefits) of a more stringent code (ASHRAE 90.1-2010) relative to a baseline code (ASHRAE 90.1-2007). We find that reductions in site energy use intensity range from 93 MJ/m(2) of new construction per year (California) to 270 MJ/m(2) of new construction per year (North Dakota). Total annual benefits from more stringent codes total $506 million for all states, where $372 million are from reductions in energy bills, and $134 million are from social benefits. These total benefits range from $0.6 million in Wyoming to $49 million in Texas. Private benefits range from $0.38 per square meter in Washington State to $1.06 per square meter in New Hampshire. Social benefits range from $0.2 per square meter annually in California to $2.5 per square meter in Ohio. Reductions in human/environmental damages and future climate damages account for nearly equal shares of social benefits.

Evaluation of Cooling Conditions for a High Heat Flux Testing Facility Based on Plasma-Arc Lamps

DOE PAGES

Charry, Carlos H.; Abdel-khalik, Said I.; Yoda, Minami; ...

2015-07-31

The new Irradiated Material Target Station (IMTS) facility for fusion materials at Oak Ridge National Laboratory (ORNL) uses an infrared plasma-arc lamp (PAL) to deliver incident heat fluxes as high as 27 MW/m 2. The facility is being used to test irradiated plasma-facing component materials as part of the joint US-Japan PHENIX program. The irradiated samples are to be mounted on molybdenum sample holders attached to a water-cooled copper rod. Depending on the size and geometry of samples, several sample holders and copper rod configurations have been fabricated and tested. As a part of the effort to design sample holdersmore » compatible with the high heat flux (HHF) testing to be conducted at the IMTS facility, numerical simulations have been performed for two different water-cooled sample holder designs using the ANSYS FLUENT 14.0 commercial computational fluid dynamics (CFD) software package. The primary objective of this work is to evaluate the cooling capability of different sample holder designs, i.e. to estimate their maximum allowable incident heat flux values. 2D axisymmetric numerical simulations are performed using the realizable k-ε turbulence model and the RPI nucleate boiling model within ANSYS FLUENT 14.0. The results of the numerical model were compared against the experimental data for two sample holder designs tested in the IMTS facility. The model has been used to parametrically evaluate the effect of various operational parameters on the predicted temperature distributions. The results were used to identify the limiting parameter for safe operation of the two sample holders and the associated peak heat flux limits. The results of this investigation will help guide the development of new sample holder designs.« less

a Comparative Analysis of Fluent and Cerebral Palsied Speech.

NASA Astrophysics Data System (ADS)

van Doorn, Janis Lee

Several features of the acoustic waveforms of fluent and cerebral palsied speech were compared, using six fluent and seven cerebral palsied subjects, with a major emphasis being placed on an investigation of the trajectories of the first three formants (vocal tract resonances). To provide an overall picture which included other acoustic features, fundamental frequency, intensity, speech timing (speech rate and syllable duration), and prevocalization (vocalization prior to initial stop consonants found in cerebral palsied speech) were also investigated. Measurements were made using repetitions of a test sentence which was chosen because it required large excursions of the speech articulators (lips, tongue and jaw), so that differences in the formant trajectories for the fluent and cerebral palsied speakers would be emphasized. The acoustic features were all extracted from the digitized speech waveform (10 kHz sampling rate): the fundamental frequency contours were derived manually, the intensity contours were measured using the signal covariance, speech rate and syllable durations were measured manually, as were the prevocalization durations, while the formant trajectories were derived from short time spectra which were calculated for each 10 ms of speech using linear prediction analysis. Differences which were found in the acoustic features can be summarized as follows. For cerebral palsied speakers, the fundamental frequency contours generally showed inappropriate exaggerated fluctuations, as did some of the intensity contours; the mean fundamental frequencies were either higher or the same as for the fluent subjects; speech rates were reduced, and syllable durations were longer; prevocalization was consistently present at the beginning of the test sentence; formant trajectories were found to have overall reduced frequency ranges, and to contain anomalous transitional features, but it is noteworthy that for any one cerebral palsied subject, the inappropriate trajectory pattern was generally reproducible. The anomalous transitional features took the form of (a) inappropriate transition patterns, (b) reduced frequency excursions, (c) increased transition durations, and (d) decreased maximum rates of frequency change.

Simplified numerical approach for estimation of effective segregation coefficient at the melt/crystal interface

NASA Astrophysics Data System (ADS)

Prostomolotov, A. I.; Verezub, N. A.; Voloshin, A. E.

2014-09-01

A thermo-gravitational convection and impurity transfer in the melt were investigated using a simplified numerical model for Bridgman GaSb(Te) crystal growth in microgravity conditions. Simplifications were as follows: flat melt/crystal interface, fixed melt sizes and only lateral ampoule heating. Calculations were carried out by Ansys®Fluent® code employing a two-dimensional Navier-Stokes-Boussinesq and heat and mass transfer equations in a coordinate system moving with the melt/crystal interface. The parametric dependence of the effective segregation coefficient Keff at the melt/crystal interface was studied for various ampoule sizes and for microgravity conditions. For the uprising one-vortex flow, the resulting dependences were presented as Keff vs. Vmax-the maximum velocity value. These dependences were compared with the formulas by Burton-Prim-Slichter's, Ostrogorsky-Muller's, as well as with the semi-analytical solutions.

Computational fluid dynamic on the temperature simulation of air preheat effect combustion in propane turbulent flame

NASA Astrophysics Data System (ADS)

Elwina; Yunardi; Bindar, Yazid

2018-04-01

this paper presents results obtained from the application of a computational fluid dynamics (CFD) code Fluent 6.3 to modelling of temperature in propane flames with and without air preheat. The study focuses to investigate the effect of air preheat temperature on the temperature of the flame. A standard k-ε model and Eddy Dissipation model are utilized to represent the flow field and combustion of the flame being investigated, respectively. The results of calculations are compared with experimental data of propane flame taken from literature. The results of the study show that a combination of the standard k-ε turbulence model and eddy dissipation model is capable of producing reasonable predictions of temperature, particularly in axial profile of all three flames. Both experimental works and numerical simulation showed that increasing the temperature of the combustion air significantly increases the flame temperature.

Numerical simulation of transient temperature profiles for canned apple puree in semi-rigid aluminum based packaging during pasteurization.

PubMed

Shafiekhani, Soraya; Zamindar, Nafiseh; Hojatoleslami, Mohammad; Toghraie, Davood

2016-06-01

Pasteurization of canned apple puree was simulated for a 3-D geometry in a semi-rigid aluminum based container which was heated from all sides at 378 K. The computational fluid dynamics code Ansys Fluent 14.0 was used and the governing equations for energy, momentum, and continuity were computed using a finite volume method. The food model was assumed to have temperature-dependent properties. To validate the simulation, the apple puree was pasteurized in a water cascading retort. The effect of the mesh structures was studied for the temperature profiles during thermal processing. The experimental temperature in the slowest heating zone in the container was compared with the temperature predicted by the model and the difference was not significant. The study also investigated the impact of head space (water-vapor) on heat transfer.

Study of blades inclination influence of gate impeller with a non-Newtonian fluid of Bingham

NASA Astrophysics Data System (ADS)

Rahmani, Lakhdar; Seghier, O.; Draoui, B.; Benachour, E.

2016-03-01

A large number of chemical operations, biochemical or petrochemical industry is very depending on the rheological fluids nature. In this work, we study the case of highly viscous of viscoplastic fluids in a classical system of agitation: a cylindrical tank with plate bottom without obstacles agitated by gate impeller agitator. We are interested to the laminar, incompressible and isothermal flows. We devote to a numerical approach carried out using an industrial code CFD Fluent 6.3.26 based on the method of finites volumes discretization of Navier - Stokes equations formulated in variables (U.V.P). The threshold of flow related to the viscoplastic behavior is modeled by a theoretical law of Bingham. The results obtained are used to compare between the five configurations suggested of power consumption. We study the influence of inertia by the variation of Reynolds number.

Experimental and numerical investigation of development of disturbances in the boundary layer on sharp and blunted cone

NASA Astrophysics Data System (ADS)

Borisov, S. P.; Bountin, D. A.; Gromyko, Yu. V.; Khotyanovsky, D. V.; Kudryavtsev, A. N.

2016-10-01

Development of disturbances in the supersonic boundary layer on sharp and blunted cones is studied both experimentally and theoretically. The experiments were conducted at the Transit-M hypersonic wind tunnel of the Institute of Theoretical and Applied Mechanics. Linear stability calculations use the basic flow profiles provided by the numerical simulations performed by solving the Navier-Stokes equations with the ANSYS Fluent and the in-house CFS3D code. Both the global pseudospectral Chebyshev method and the local iteration procedure are employed to solve the eigenvalue problem and determine linear stability characteristics. The calculated amplification factors for disturbances of various frequencies are compared with the experimentally measured pressure fluctuation spectra at different streamwise positions. It is shown that the linear stability calculations predict quite accurately the frequency of the most amplified disturbances and enable us to estimate reasonably well their relative amplitudes.

An approach for modeling thermal destruction of hazardous wastes in circulating fluidized bed incinerator.

PubMed

Patil, M P; Sonolikar, R L

2008-10-01

This paper presents a detailed computational fluid dynamics (CFD) based approach for modeling thermal destruction of hazardous wastes in a circulating fluidized bed (CFB) incinerator. The model is based on Eular - Lagrangian approach in which gas phase (continuous phase) is treated in a Eularian reference frame, whereas the waste particulate (dispersed phase) is treated in a Lagrangian reference frame. The reaction chemistry hasbeen modeled through a mixture fraction/ PDF approach. The conservation equations for mass, momentum, energy, mixture fraction and other closure equations have been solved using a general purpose CFD code FLUENT4.5. Afinite volume method on a structured grid has been used for solution of governing equations. The model provides detailed information on the hydrodynamics (gas velocity, particulate trajectories), gas composition (CO, CO2, O2) and temperature inside the riser. The model also allows different operating scenarios to be examined in an efficient manner.

Modeling of Non-Isothermal Cryogenic Fluid Sloshing

NASA Technical Reports Server (NTRS)

Agui, Juan H.; Moder, Jeffrey P.

2015-01-01

A computational fluid dynamic model was used to simulate the thermal destratification in an upright self-pressurized cryostat approximately half-filled with liquid nitrogen and subjected to forced sinusoidal lateral shaking. A full three-dimensional computational grid was used to model the tank dynamics, fluid flow and thermodynamics using the ANSYS Fluent code. A non-inertial grid was used which required the addition of momentum and energy source terms to account for the inertial forces, energy transfer and wall reaction forces produced by the shaken tank. The kinetics-based Schrage mass transfer model provided the interfacial mass transfer due to evaporation and condensation at the sloshing interface. The dynamic behavior of the sloshing interface, its amplitude and transition to different wave modes, provided insight into the fluid process at the interface. The tank pressure evolution and temperature profiles compared relatively well with the shaken cryostat experimental test data provided by the Centre National D'Etudes Spatiales.

CFD study of the thermal transfer of a non-Newtonian fluid within a tank mechanically stirred by an anchor-shaped impeller

NASA Astrophysics Data System (ADS)

Rahmani, L.; Seghier, O.; Benmoussa, A.; Draoui, B.

2018-06-01

The most of operations of chemical, biochemical or petrochemical industries are carried out in tanks or in reactors which are mechanically-controlled. The optimum mode of operation of these devices requires a finalized knowledge of the thermo-hydrodynamic behavior induced by the agitator. In the present work, the characterization of the incompressible hydrodynamic and thermal fields of a non-Newtonian fluid (Bingham) in a flat, non-baffled cylindrical vessel fitted with anchor agitator was undertaken by numerical simulation, using the CFD code Fluent (6.3.26) based on the finite volume discretization method of the energy equation and the Navier-Stokes equations which are formulated in (U.V.P) variables. We have summarized this simulated system by comparing of the consumed power and the Nusselt number for this type of mobile (Anchor agitator).

50 CFR Table 17 to Part 679 - Process Codes for Use With State of Alaska Commercial Operator's Annual Report (COAR)

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Process Codes for Use With State of Alaska Commercial Operator's Annual Report (COAR) 17 Table 17 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OF THE EXCLUSIVE ECONOMIC...

Sponsorship in non-commercial clinical trials: definitions, challenges and the role of Good Clinical Practices guidelines.

PubMed

Ravinetto, Raffaella; De Nys, Katelijne; Boelaert, Marleen; Diro, Ermias; Meintjes, Graeme; Adoke, Yeka; Tagbor, Harry; Casteels, Minne

2015-12-30

Non-commercial clinical research plays an increasingly essential role for global health. Multiple partners join in international consortia that operate under the limited timeframe of a specific funding period. One organisation (the sponsor) designs and carries out the trial in collaboration with research partners, and is ultimately responsible for the trial's scientific, ethical, regulatory and legal aspects, while another organization, generally in the North (the funder), provides the external funding and sets funding conditions. Even if external funding mechanisms are key for most non-commercial research, the dependence on an external funder's policies may heavily influence the choices of a sponsor. In addition, the competition for accessing the available external funds is great, and non-commercial sponsors may not be in a position to discuss or refuse standard conditions set by a funder. To see whether the current definitions adequately address the intricacies of sponsorship in externally-funded trials, we looked at how a "sponsor" of clinical trials is defined in selected international guidelines, with particular focus on international Good Clinical Practices codes, and in selected European and African regulations/legislations. Our limited analysis suggests that the sponsors definition from the 1995 WHO Good Clinical Practices code has been integrated as such into many legislations, guidelines and regulations, and that it is not adequate to cover today's reality of funding arrangements in global health, where the legal responsibility and the funding source are de facto split. In agreement with other groups, we suggest that the international Good Clinical Practices codes should be updated to reflect the reality of non-commercial clinical research. In particular, they should explicitly include the distinction between commercial and non-commercial sponsors, and provide guidance to non-commercial sponsors for negotiating with external funding agencies and other research counterparts. Non-commercial sponsors of clinical trials should surely invest in the development of adequate legal, administrative and management skills. By acknowledging their role and specificities, and by providing them with adapted guidance, the international Good Clinical Practices codes would provide valuable guidance and support to non-commercial clinical research, whose relevance for global health is increasingly evident.

Tribological characteristic enhancement effects by polymer thickened oil in lubricated sliding contacts

NASA Astrophysics Data System (ADS)

Pratomo, Ariawan Wahyu; Muchammad, Tauviqirrahman, Mohammad; Jamari, Bayuseno, Athanasius P.

2016-04-01

Polymer thickened oils are the most preferred materials for modern lubrication applications due to their high shear. The present paper explores a lubrication mechanism in sliding contact lubricated with polymer thickened oil considering cavitation. Investigations are carried out by using a numerical method based on commercial CFD (computational fluid dynamic) software ANSYS for fluid flow phenomenon (Fluent) to assess the tribological characteristic (i.e. hydrodynamic pressure distribution) of lubricated sliding contact. The Zwart-Gerber-Belamri model for cavitation is adopted in this simulation to predict the extent of the full film region. The polymer thickened oil is characterized as non-Newtonian power-law fluid. The simulation results show that the cavitation lead lower pressure profile compared to that without cavitation. In addition, it is concluded that the characteristic of the lubrication performance with polymer thickened oil is strongly dependent on the Power-law index of lubricant.

Study of an array of two circular jets impinging on a flat surface

NASA Astrophysics Data System (ADS)

Simionescu, Ştefan-Mugur; Dhondoo, Nilesh; Bălan, Corneliu

2018-02-01

In this study, the flow characteristics of an array of two circular, laminar air jets impinging on a smooth solid wall are experimentally and numerically investigated. Direct visualizations using high speed/resolution camera are performed. The evolution of the vortical structures in the area where the jet is deflected from axial to radial direction is emphasized, as well as the interaction between the two jets. A set of CFD numerical simulations in 2D flow domains are performed by using the commercial software Fluent, in the context of Reynolds-averaged Navier-Stokes (RANS) modeling. The numerical resultsare compared and validated with the experiments. The vorticity number is computed and plotted at two different positions from the jet nozzle, and a study of its distribution gives a clue on how the jets are interacting with each other in the proximity of the solid wall.

Simulation of Flow around Isolated Helicopter Fuselage

NASA Astrophysics Data System (ADS)

Kusyumov, A. N.; Mikhailov, S. A.; Romanova, E. V.; Garipov, A. O.; Nikolaev, E. I.; Barakos, G.

2013-04-01

Low fuselage drag has always been a key target of helicopter manufacturers. Therefore, this paper focuses on CFD predictions of the drag of several components of a typical helicopter fuselage. In the first section of the paper, validation of the obtained CFD predictions is carried out using wind tunnel measurements. The measurements were carried out at the Kazan National Research Technical University n.a. A. Tupolev. The second section of the paper is devoted to the analysis of drag contributions of several components of the ANSAT helicopter prototype fuselage using the RANS approach. For this purpose, several configurations of fuselages are considered with different levels of complexity including exhausts and skids. Depending on the complexity of the considered configuration and CFD mesh both the multi-block structured HMB solver and the unstructured commercial tool Fluent are used. Finally, the effect of an actuator disk on the predicted drag is addressed.

CFD analysis of hydrodynamic studies of a bubbling fluidized bed

NASA Astrophysics Data System (ADS)

Rao, B. J. M.; Rao, K. V. N. S.; Ranga Janardhana, G.

2018-03-01

Fluidization velocity is one of the most important parameter to characterize the hydrodynamic studies of fluidized bed asit determines different flow regimes. Computational Fluid Dynamics simulations are carriedfor a cylindrical bubbling fluidized bed with a static bed height 1m with 0.150m diameter of gasification chamber. The parameter investigated is fluidization velocity in range of 0.05m/s to 0.7m/s. Sand with density 2600kg/m3 and with a constant particle diameter of sand 385μm is employed for all the simulations. Simulations are conducted using the commercial Computational Fluid Dynamics software, ANSYS-FLUENT.The bubbling flow regime is appeared above the air inlet velocity of 0.2m/s. Bubbling character is increased with increase in inlet air velocities indicated by asymmetrical fluctuations of volume fractions in radial directions at different bed heights

Finite Element Modeling and Analysis of Powder Stream in Low Pressure Cold Spray Process

NASA Astrophysics Data System (ADS)

Goyal, Tarun; Walia, Ravinderjit Singh; Sharma, Prince; Sidhu, Tejinder Singh

2016-07-01

Low pressure cold gas dynamic spray (LPCGDS) is a coating process that utilize low pressure gas (5-10 bars instead of 25-30 bars) and the radial injection of powder instead of axial injection with the particle range (1-50 μm). In the LPCGDS process, pressurized compressed gas is accelerated to the critical velocity, which depends on length of the divergent section of nozzle, the propellant gas and particle characteristics, and the diameters ratio of the inlet and outer diameters. This paper presents finite element modeling (FEM) of powder stream in supersonic nozzle wherein adiabatic gas flow and expansion of gas occurs in uniform manner and the same is used to evaluate the resultant temperature and velocity contours during coating process. FEM analyses were performed using commercial finite volume package, ANSYS CFD FLUENT. The results are helpful to predict the characteristics of powder stream at the exit of the supersonic nozzle.

A comparison of cylindrical and row trenched cooling holes with alignment angle of 0 degree near the combustor endwall

NASA Astrophysics Data System (ADS)

Kianpour, E.; Nor Azwadi, C. S.; Golshokouh, I.

2013-12-01

We studied the effects of cylindrical and row trenched cooling holes with alignment angle of 0° at BR=3.18 on the film cooling performance near the endwall surface of a combustor simulator. In this research, a three-dimensional presentation of gas turbine engine was simulated and analyzed with a commercial finite volume package FLUENT 6.2.26 to gain fundamental data. The current study has been performed with Reynolds-averaged Navier-Stokes turbulence model (RANS) on internal cooling passages. This combustor simulator combined the interaction of two rows of dilution jets, which were staggered in the stream wise direction and aligned in the span wise direction. The entire findings of the study declared that with using the row trenched holes near the enwall surface; film cooling effectiveness is doubled compared to the cooling performance of baseline case.

Determination of the oil distribution in a hermetic compressor using numerical simulation

NASA Astrophysics Data System (ADS)

Posch, S.; Hopfgartner, J.; Berger, E.; Zuber, B.; Almbauer, R.; Schöllauf, P.

2017-08-01

In addition to the reduction of friction the oil in a hermetic compressor is very important for the transfer of heat from hot parts to the compressor shell. The simulation of the oil distribution in a hermetic reciprocating compressor for refrigeration application is shown in the present work. Using the commercial Computational Fluid Dynamics (CFD) software ANSYS Fluent, the oil flow inside the compressor shell from the oil pump outlet to the oil sump is calculated. A comprehensive overview of the used models and the boundary conditions is given. After reaching steady-state conditions the oil covered surfaces are analysed concerning heat transfer coefficients. The gained heat transfer coefficients are used as input parameters for a thermal model of a hermetic compressor. An increase in accuracy of the thermal model with the simulated heat transfer coefficients compared to values from literature is shown by model validation with experimental data.

Multiphysics Simulation of Welding-Arc and Nozzle-Arc System: Mathematical-Model, Solution-Methodology and Validation

NASA Astrophysics Data System (ADS)

Pawar, Sumedh; Sharma, Atul

2018-01-01

This work presents mathematical model and solution methodology for a multiphysics engineering problem on arc formation during welding and inside a nozzle. A general-purpose commercial CFD solver ANSYS FLUENT 13.0.0 is used in this work. Arc formation involves strongly coupled gas dynamics and electro-dynamics, simulated by solution of coupled Navier-Stoke equations, Maxwell's equations and radiation heat-transfer equation. Validation of the present numerical methodology is demonstrated with an excellent agreement with the published results. The developed mathematical model and the user defined functions (UDFs) are independent of the geometry and are applicable to any system that involves arc-formation, in 2D axisymmetric coordinates system. The high-pressure flow of SF6 gas in the nozzle-arc system resembles arc chamber of SF6 gas circuit breaker; thus, this methodology can be extended to simulate arcing phenomenon during current interruption.

Numerical evaluation of an innovative cup layout for open volumetric solar air receivers

NASA Astrophysics Data System (ADS)

Cagnoli, Mattia; Savoldi, Laura; Zanino, Roberto; Zaversky, Fritz

2016-05-01

This paper proposes an innovative volumetric solar absorber design to be used in high-temperature air receivers of solar power tower plants. The innovative absorber, a so-called CPC-stacked-plate configuration, applies the well-known principle of a compound parabolic concentrator (CPC) for the first time in a volumetric solar receiver, heating air to high temperatures. The proposed absorber configuration is analyzed numerically, applying first the open-source ray-tracing software Tonatiuh in order to obtain the solar flux distribution on the absorber's surfaces. Next, a Computational Fluid Dynamic (CFD) analysis of a representative single channel of the innovative receiver is performed, using the commercial CFD software ANSYS Fluent. The solution of the conjugate heat transfer problem shows that the behavior of the new absorber concept is promising, however further optimization of the geometry will be necessary in order to exceed the performance of the classical absorber designs.

Turbulent flow computation in a circular U-Bend

NASA Astrophysics Data System (ADS)

Miloud, Abdelkrim; Aounallah, Mohammed; Belkadi, Mustapha; Adjlout, Lahouari; Imine, Omar; Imine, Bachir

2014-03-01

Turbulent flows through a circular 180° curved bend with a curvature ratio of 3.375, defined as the the bend mean radius to pipe diameter is investigated numerically for a Reynolds number of 4.45×104. The computation is performed for a U-Bend with full long pipes at the entrance and at the exit. The commercial ANSYS FLUENT is used to solve the steady Reynolds-Averaged Navier-Stokes (RANS) equations. The performances of standard k-ɛ and the second moment closure RSM models are evaluated by comparing their numerical results against experimental data and testing their capabilities to capture the formation and extend this turbulence driven vortex. It is found that the secondary flows occur in the cross-stream half-plane of such configurations and primarily induced by high anisotropy of the cross-stream turbulent normal stresses near the outer bend.

RANS simulation of cavitation and hull pressure fluctuation for marine propeller operating behind-hull condition

NASA Astrophysics Data System (ADS)

Paik, Kwang-Jun; Park, Hyung-Gil; Seo, Jongsoo

2013-12-01

Simulations of cavitation flow and hull pressure fluctuation for a marine propeller operating behind a hull using the unsteady Reynolds-Averaged Navier-Stokes equations (RANS) are presented. A full hull body submerged under the free surface is modeled in the computational domain to simulate directly the wake field of the ship at the propeller plane. Simulations are performed in design and ballast draught conditions to study the effect of cavitation number. And two propellers with slightly different geometry are simulated to validate the detectability of the numerical simulation. All simulations are performed using a commercial CFD software FLUENT. Cavitation patterns of the simulations show good agreement with the experimental results carried out in Samsung CAvitation Tunnel (SCAT). The simulation results for the hull pressure fluctuation induced by a propeller are also compared with the experimental results showing good agreement in the tendency and amplitude, especially, for the first blade frequency.

Modeling of an argon cascaded arc plasma by ANSYS FLUENT

NASA Astrophysics Data System (ADS)

Wei, Guodong; Qi, Xin; Yang, Lei

2014-04-01

In this work, an argon cascaded arc plasma is simulated by the business software ANSYS FLUENT. In fact, thus plasma is a high temperature arc (plasma window) with an average temperature of 12000 °C, which can be used as a medium between high pressure and vacuum mainly due to its characteristics of high temperature. According to the simulating results, the temperature can reach as high as 11500 °C which is in great agreement with that of other reports about plasma window.

DISRUPTION OF LARGE-SCALE NEURAL NETWORKS IN NON-FLUENT/AGRAMMATIC VARIANT PRIMARY PROGRESSIVE APHASIA ASSOCIATED WITH FRONTOTEMPORAL DEGENERATION PATHOLOGY

PubMed Central

Grossman, Murray; Powers, John; Ash, Sherry; McMillan, Corey; Burkholder, Lisa; Irwin, David; Trojanowski, John Q.

2012-01-01

Non-fluent/agrammatic primary progressive aphasia (naPPA) is a progressive neurodegenerative condition most prominently associated with slowed, effortful speech. A clinical imaging marker of naPPA is disease centered in the left inferior frontal lobe. We used multimodal imaging to assess large-scale neural networks underlying effortful expression in 15 patients with sporadic naPPA due to frontotemporal lobar degeneration (FTLD) spectrum pathology. Effortful speech in these patients is related in part to impaired grammatical processing, and to phonologic speech errors. Gray matter (GM) imaging shows frontal and anterior-superior temporal atrophy, most prominently in the left hemisphere. Diffusion tensor imaging reveals reduced fractional anisotropy in several white matter (WM) tracts mediating projections between left frontal and other GM regions. Regression analyses suggest disruption of three large-scale GM-WM neural networks in naPPA that support fluent, grammatical expression. These findings emphasize the role of large-scale neural networks in language, and demonstrate associated language deficits in naPPA. PMID:23218686

What's in a sentence? The crucial role of lexical content in sentence production in nonfluent aphasia.

PubMed

Speer, Paula; Wilshire, Carolyn E

2013-01-01

This study investigated the effect of lexical content on sentence production in nonfluent aphasia. Five participants with nonfluent aphasia, four with fluent aphasia, and eight controls were asked to describe pictured events in subject-verb-object sentences. Experiment 1 manipulated speed of lexical retrieval by varying the frequency of sentence nouns. Nonfluent participants' accuracy was consistently higher for sentences commencing with a high- than with a low-frequency subject noun, even when errors on those nouns were themselves excluded. This was not the case for the fluent participants. Experiment 2 manipulated the semantic relationship between subject and object nouns. The nonfluent participants produced sentences less accurately when they contained related than when they contained unrelated lexical items. The fluent participants exhibited the opposite trend. We propose that individuals with nonfluent aphasia are disproportionately reliant on activated conceptual-lexical representations to drive the sentence generation process, an idea we call the content drives structure (COST) hypothesis.

Unbiased and unnoticed verbal conditioning: the double agent robot procedure1

PubMed Central

Rosenfeld, Howard M.; Baer, Donald M.

1970-01-01

Subjects who were told they were “experimenters” attempted to reinforce fluent speech in a supposed subject with whom they spoke via intercom. The supposed subject was to say nouns, one at a time, on request by the “experimenter”, who reinforced fluent pronunciation with points. Actually, the “experimenter” was talking to a multi-track tape recording, one track of which contained fluently spoken nouns, the other track containing disfluently spoken nouns. If the “experimenter's” request for the next noun was in a specified form a word from the fluent track was played to him as reinforcement; requests in any other form produced the word from the disfluent track. Repeated conditioning of specific forms of requests was accomplished with two subject-“experimenters,” who were unable to describe changes in their own behavior, or the contingencies applied. This technique improved upon an earlier method that had yielded similar results, but was less thoroughly controlled against possible human bias. PMID:16811461

Instrument Package Manipulation Through the Generation and Use of an Attenuated-Fluent Gas Fold

NASA Technical Reports Server (NTRS)

Breen, Daniel P.

2012-01-01

This document discusses a technique that provides a means for suspending large, awkward loads, instrument packages, components, and machinery in a stable, controlled, and precise manner. In the baseplate of the test machine, a pattern of grooves and ports is installed that when pressurized generates an attenuated- fluent gas fold providing a low-cost, near-zero-coefficient-of-friction lubrication boundary layer that supports the object evenly, and in a predictable manner. Package movement control requires minimal force. Aids to repeatable travel and positional accuracy can be added via the addition of simple guide bars and stops to the floor or object being moved. This allows easily regulated three-axis motions. Loads of extreme weight and size can be moved and guided by a single person, or by automated means, using minimal force. Upon removal of the attenuated fluent gas fold, the object returns to a stable resting position without impact forces affecting the object.

10 CFR 434.99 - Explanation of numbering system for codes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Explanation of numbering system for codes. 434.99 Section 434.99 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS § 434.99 Explanation of numbering system for codes. (a) For...

10 CFR 434.99 - Explanation of numbering system for codes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Explanation of numbering system for codes. 434.99 Section 434.99 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS § 434.99 Explanation of numbering system for codes. (a) For...

48 CFR 1352.213-71 - Instructions for submitting quotations under the simplified acquisition threshold-non-commercial.

Code of Federal Regulations, 2010 CFR

2010-10-01

... submitting quotations under the simplified acquisition threshold-non-commercial. 1352.213-71 Section 1352.213... quotations under the simplified acquisition threshold—non-commercial. As prescribed in 48 CFR 1313.302-1-70... Threshold—Non-Commercial (APR 2010) (a) North American Industry Classification System (NAICS) code and small...

Temperature Distribution Within a Defect-Free Silicon Carbide Diode Predicted by a Computational Model

NASA Technical Reports Server (NTRS)

Kuczmarski, Maria A.; Neudeck, Philip G.

2000-01-01

Most solid-state electronic devices diodes, transistors, and integrated circuits are based on silicon. Although this material works well for many applications, its properties limit its ability to function under extreme high-temperature or high-power operating conditions. Silicon carbide (SiC), with its desirable physical properties, could someday replace silicon for these types of applications. A major roadblock to realizing this potential is the quality of SiC material that can currently be produced. Semiconductors require very uniform, high-quality material, and commercially available SiC tends to suffer from defects in the crystalline structure that have largely been eliminated in silicon. In some power circuits, these defects can focus energy into an extremely small area, leading to overheating that can damage the device. In an effort to better understand the way that these defects affect the electrical performance and reliability of an SiC device in a power circuit, the NASA Glenn Research Center at Lewis Field began an in-house three-dimensional computational modeling effort. The goal is to predict the temperature distributions within a SiC diode structure subjected to the various transient overvoltage breakdown stresses that occur in power management circuits. A commercial computational fluid dynamics computer program (FLUENT-Fluent, Inc., Lebanon, New Hampshire) was used to build a model of a defect-free SiC diode and generate a computational mesh. A typical breakdown power density was applied over 0.5 msec in a heated layer at the junction between the p-type SiC and n-type SiC, and the temperature distribution throughout the diode was then calculated. The peak temperature extracted from the computational model agreed well (within 6 percent) with previous first-order calculations of the maximum expected temperature at the end of the breakdown pulse. This level of agreement is excellent for a model of this type and indicates that three-dimensional computational modeling can provide useful predictions for this class of problem. The model is now being extended to include the effects of crystal defects. The model will provide unique insights into how high the temperature rises in the vicinity of the defects in a diode at various power densities and pulse durations. This information also will help researchers in understanding and designing SiC devices for safe and reliable operation in high-power circuits.

CARES/LIFE Software Commercialization

NASA Technical Reports Server (NTRS)

1995-01-01

The NASA Lewis Research Center has entered into a letter agreement with BIOSYM Technologies Inc. (now merged with Molecular Simulations Inc. (MSI)). Under this agreement, NASA will provide a developmental copy of the CARES/LIFE computer program to BIOSYM for evaluation. This computer code predicts the time-dependent reliability of a thermomechanically loaded component. BIOSYM will become familiar with CARES/LIFE, provide results of computations useful in validating the code, evaluate it for potential commercialization, and submit suggestions for improvements or extensions to the code or its documentation. If BIOSYM/Molecular Simulations reaches a favorable evaluation of CARES/LIFE, NASA will enter into negotiations for a cooperative agreement with BIOSYM/Molecular Simulations to further develop the code--adding features such as a user-friendly interface and other improvements. This agreement would give BIOSYM intellectual property rights in the modified codes, which they could protect and then commercialize. NASA would provide BIOSYM with the NASA-developed source codes and would agree to cooperate with BIOSYM in further developing the code. In return, NASA would receive certain use rights in the modified CARES/LIFE program. Presently BIOSYM Technologies Inc. has been involved with integration issues concerning its merger with Molecular Simulations Inc., since both companies used to compete in the computational chemistry market, and to some degree, in the materials market. Consequently, evaluation of the CARES/LIFE software is on hold for a month or two while the merger is finalized. Their interest in CARES continues, however, and they expect to get back to the evaluation by early November 1995.

Energy and Energy Cost Savings Analysis of the 2015 IECC for Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Jian; Xie, YuLong; Athalye, Rahul A.

As required by statute (42 USC 6833), DOE recently issued a determination that ANSI/ASHRAE/IES Standard 90.1-2013 would achieve greater energy efficiency in buildings subject to the code compared to the 2010 edition of the standard. Pacific Northwest National Laboratory (PNNL) conducted an energy savings analysis for Standard 90.1-2013 in support of its determination . While Standard 90.1 is the model energy standard for commercial and multi-family residential buildings over three floors (42 USC 6833), many states have historically adopted the International Energy Conservation Code (IECC) for both residential and commercial buildings. This report provides an assessment as to whether buildingsmore » constructed to the commercial energy efficiency provisions of the 2015 IECC would save energy and energy costs as compared to the 2012 IECC. PNNL also compared the energy performance of the 2015 IECC with the corresponding Standard 90.1-2013. The goal of this analysis is to help states and local jurisdictions make informed decisions regarding model code adoption.« less

Development of a Benchmark Example for Delamination Fatigue Growth Prediction

NASA Technical Reports Server (NTRS)

Krueger, Ronald

2010-01-01

The development of a benchmark example for cyclic delamination growth prediction is presented and demonstrated for a commercial code. The example is based on a finite element model of a Double Cantilever Beam (DCB) specimen, which is independent of the analysis software used and allows the assessment of the delamination growth prediction capabilities in commercial finite element codes. First, the benchmark result was created for the specimen. Second, starting from an initially straight front, the delamination was allowed to grow under cyclic loading in a finite element model of a commercial code. The number of cycles to delamination onset and the number of cycles during stable delamination growth for each growth increment were obtained from the analysis. In general, good agreement between the results obtained from the growth analysis and the benchmark results could be achieved by selecting the appropriate input parameters. Overall, the results are encouraging but further assessment for mixed-mode delamination is required

28 CFR 36.603 - Preliminary determination.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... filed by a submitting official for certification of a code, and after consultation with the...

28 CFR 36.603 - Preliminary determination.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... filed by a submitting official for certification of a code, and after consultation with the...

28 CFR 36.603 - Preliminary determination.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... filed by a submitting official for certification of a code, and after consultation with the...

28 CFR 36.603 - Preliminary determination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... filed by a submitting official for certification of a code, and after consultation with the...

Bar-Code System for a Microbiological Laboratory

NASA Technical Reports Server (NTRS)

Law, Jennifer; Kirschner, Larry

2007-01-01

A bar-code system has been assembled for a microbiological laboratory that must examine a large number of samples. The system includes a commercial bar-code reader, computer hardware and software components, plus custom-designed database software. The software generates a user-friendly, menu-driven interface.

28 CFR 36.601 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.601... means a State law or local building code or similar ordinance, or part thereof, that establishes... designee. Certification of equivalency means a final certification that a code meets or exceeds the minimum...

28 CFR 36.606 - Effect of certification.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... the question of whether equipment in a building built according to the code satisfies the Act's... buildings and facilities that comply with the certified code. A submitting official may reapply for...

28 CFR 36.606 - Effect of certification.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... the question of whether equipment in a building built according to the code satisfies the Act's... buildings and facilities that comply with the certified code. A submitting official may reapply for...

28 CFR 36.606 - Effect of certification.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... the question of whether equipment in a building built according to the code satisfies the Act's... buildings and facilities that comply with the certified code. A submitting official may reapply for...

28 CFR 36.601 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.601... means a State law or local building code or similar ordinance, or part thereof, that establishes... designee. Certification of equivalency means a final certification that a code meets or exceeds the minimum...

28 CFR 36.606 - Effect of certification.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... the question of whether equipment in a building built according to the code satisfies the Act's... buildings and facilities that comply with the certified code. A submitting official may reapply for...

28 CFR 36.601 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.601... means a State law or local building code or similar ordinance, or part thereof, that establishes... designee. Certification of equivalency means a final certification that a code meets or exceeds the minimum...

Values in Prime Time Alcoholic Beverage Commercials.

ERIC Educational Resources Information Center

Frazer, Charles F.

Content analysis was used to study the values evident in televised beer and wine commercials. Seventy-seven prime time commercials, 7.6% of a week's total, were analyzed along value dimensions adapted from Gallup's measure of popular social values. The intensity of each value was coded on a five-point scale. None of the commercials in the beer and…

Integrated Robot Task and Motion Planning in the Now

DTIC Science & Technology

2012-06-29

so that it can effectively achieve its goals? 1 Figure 1: Simulated apartment environment with pans, cups, sink, stove, and furniture . We propose a...s. We also use s[o].min and s[o]. max to name the left and right edges of the object (loc is the same as min). 2.3 Fluents A fluent is a condition...s) := (r.min ≤ s[o].min + δ) & (r.max ≥ s[o]. max − δ) . • ClearX (r, x): region r is clear, except for exceptions, x, which is a set of objects

28 CFR 36.607 - Effect of certification.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PUBLIC ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes... the question of whether equipment in a building built according to the code satisfies the Act's... equivalency only with respect to those features or elements that are both covered by the certified code and...

45 CFR 74.42 - Codes of conduct.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., AND COMMERCIAL ORGANIZATIONS Post-Award Requirements Procurement Standards § 74.42 Codes of conduct... the gift is an unsolicited item of nominal value. The standards of conduct shall provide for...

National Combustion Code, a Multidisciplinary Combustor Design System, Will Be Transferred to the Commercial Sector

NASA Technical Reports Server (NTRS)

Steele, Gynelle C.

1999-01-01

The NASA Lewis Research Center and Flow Parametrics will enter into an agreement to commercialize the National Combustion Code (NCC). This multidisciplinary combustor design system utilizes computer-aided design (CAD) tools for geometry creation, advanced mesh generators for creating solid model representations, a common framework for fluid flow and structural analyses, modern postprocessing tools, and parallel processing. This integrated system can facilitate and enhance various phases of the design and analysis process.

Post-treatment speech naturalness of comprehensive stuttering program clients and differences in ratings among listener groups.

PubMed

Teshima, Shelli; Langevin, Marilyn; Hagler, Paul; Kully, Deborah

2010-03-01

The purposes of this study were to investigate naturalness of the post-treatment speech of Comprehensive Stuttering Program (CSP) clients and differences in naturalness ratings by three listener groups. Listeners were 21 student speech-language pathologists, 9 community members, and 15 listeners who stutter. Listeners rated perceptually fluent speech samples of CSP clients obtained immediately post-treatment (Post) and at 5 years follow-up (F5), and speech samples of matched typically fluent (TF) speakers. A 9-point interval rating scale was used. A 3 (listener group)x2 (time)x2 (speaker) mixed ANOVA was used to test for differences among mean ratings. The difference between CSP Post and F5 mean ratings was statistically significant. The F5 mean rating was within the range reported for typically fluent speakers. Student speech-language pathologists were found to be less critical than community members and listeners who stutter in rating naturalness; however, there were no significant differences in ratings made by community members and listeners who stutter. Results indicate that the naturalness of post-treatment speech of CSP clients improves in the post-treatment period and that it is possible for clients to achieve levels of naturalness that appear to be acceptable to adults who stutter and that are within the range of naturalness ratings given to typically fluent speakers. Readers will be able to (a) summarize key findings of studies that have investigated naturalness ratings, and (b) interpret the naturalness ratings of Comprehensive Stuttering Program speaker samples and the ratings made by the three listener groups in this study.

Autonomic arousal in adults who stutter prior to various reading tasks intended to elicit changes in stuttering frequency.

PubMed

Bowers, Andrew; Saltuklaroglu, Tim; Kalinowski, Joseph

2012-01-01

This study examined relationships between anticipatory autonomic arousal and stuttering in four reading tasks. 13 adult persons who stutter (PWS) reported their 'feared' (expected to elicit more stuttering) sounds. They read phrases initiated by feared (F) and neutral (N) phonemes. Both stimuli sets were read solo (S) and with choral accompaniment (C), creating FS, FC, NS, and NC conditions. Skin conductance (SC) and heart rate (HR) measures were made during a 9s window that followed stimulus presentation and preceded speaking. Only SC measures produced significant differences across conditions. Choral conditions produced decreases in SC measures and stuttered trials. Feared conditions produced increases in SC but not stuttering. HR measures were variable, undifferentiated by condition, but produced a gradually increasing triphasic response pattern. No differences in anticipatory SC or HR measures were found in stuttered versus fluent trial comparisons. However, the NC condition, which eliminated stuttering, produced significantly lower SC measures than the fluent utterances in the other conditions (FS, FC, NS). Furthermore, SC measures from the fluent and stuttered trials were similar in these three conditions. These findings suggest that anticipatory autonomic arousal is better differentiated by the possibility of stuttering than by a fluent/stuttered speech outcome. Trials that produced anticipatory SC responses showed greater final HR deceleration, suggesting autonomic coactivation, a response pattern that is associated with aversive stimuli and herein, likely indicative of speech-related state anxiety. However, these physiological markers of anxiety appear to be neither necessary nor sufficient to induce observable stuttering. Copyright © 2011 Elsevier B.V. All rights reserved.

Comparison of upper and lower lip muscle activity between stutterers and fluent speakers.

PubMed

de Felício, Cláudia Maria; Freitas, Rosana Luiza Rodrigues Gomes; Vitti, Mathias; Regalo, Simone Cecilio Hallak

2007-08-01

There is a widespread clinical view that stuttering is associated with high levels of muscles activity. The proposal of this research was to compare stutterers and fluent speakers with respect to the electromyographic activity of the upper and lower lip muscles. Ten individuals who stutter and 10 fluent speakers (control group) paired by gender and age were studied (mean age: 13.4 years). Groups were defined by the speech sample analysis of the ABFW-Language Test. A K6-I EMG (Myo-tronics Co., Seattle, WA, USA) with double disposable silver electrodes (Duotrodes, Myo-tronics Co., Seattle, WA) being used in order to analyze lip muscle activity. The clinical conditions investigated were movements during speech, orofacial non-speech tasks, and rest. Electromyographic data were normalized by lip pursing activity. The non-parametric Mann-Whitney test was used for the comparison of speech fluency profile, and the Student t-test for independent samples for group comparison regarding electromyographic data. There was a statistically significant difference between groups regarding speech fluency profile and upper lip activity in the following conditions: lip lateralization to the right and to the left and rest before exercises (P<0.05). There was no significant difference between groups regarding lower lip activity (P>0.05). The EMG activity of the upper lip muscle in the group with stuttering was significantly lower than in the control group in some of the clinical conditions analyzed. There was no significant difference between groups regarding the lower lip muscle. The subjects who stutter did not present higher levels of muscle activity in lip muscles than fluent speakers.

Spectral Coefficient Analyses of Word-Initial Stop Consonant Productions Suggest Similar Anticipatory Coarticulation for Stuttering and Nonstuttering Adults.

PubMed

Maruthy, Santosh; Feng, Yongqiang; Max, Ludo

2018-03-01

A longstanding hypothesis about the sensorimotor mechanisms underlying stuttering suggests that stuttered speech dysfluencies result from a lack of coarticulation. Formant-based measures of either the stuttered or fluent speech of children and adults who stutter have generally failed to obtain compelling evidence in support of the hypothesis that these individuals differ in the timing or degree of coarticulation. Here, we used a sensitive acoustic technique-spectral coefficient analyses-that allowed us to compare stuttering and nonstuttering speakers with regard to vowel-dependent anticipatory influences as early as the onset burst of a preceding voiceless stop consonant. Eight adults who stutter and eight matched adults who do not stutter produced C 1 VC 2 words, and the first four spectral coefficients were calculated for one analysis window centered on the burst of C 1 and two subsequent windows covering the beginning of the aspiration phase. Findings confirmed that the combined use of four spectral coefficients is an effective method for detecting the anticipatory influence of a vowel on the initial burst of a preceding voiceless stop consonant. However, the observed patterns of anticipatory coarticulation showed no statistically significant differences, or trends toward such differences, between the stuttering and nonstuttering groups. Combining the present results for fluent speech in one given phonetic context with prior findings from both stuttered and fluent speech in a variety of other contexts, we conclude that there is currently no support for the hypothesis that the fluent speech of individuals who stutter is characterized by limited coarticulation.

32 CFR Appendix D to Part 169a - Commercial Activities Management Information System (CAMIS)

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Commercial Activities Management Information... to Part 169a—Commercial Activities Management Information System (CAMIS) Each DoD Component shall... American Standard Code Information Interchange text file format on a MicroSoft-Disk Operating System...

Audiovisual speech integration in the superior temporal region is dysfunctional in dyslexia.

PubMed

Ye, Zheng; Rüsseler, Jascha; Gerth, Ivonne; Münte, Thomas F

2017-07-25

Dyslexia is an impairment of reading and spelling that affects both children and adults even after many years of schooling. Dyslexic readers have deficits in the integration of auditory and visual inputs but the neural mechanisms of the deficits are still unclear. This fMRI study examined the neural processing of auditorily presented German numbers 0-9 and videos of lip movements of a German native speaker voicing numbers 0-9 in unimodal (auditory or visual) and bimodal (always congruent) conditions in dyslexic readers and their matched fluent readers. We confirmed results of previous studies that the superior temporal gyrus/sulcus plays a critical role in audiovisual speech integration: fluent readers showed greater superior temporal activations for combined audiovisual stimuli than auditory-/visual-only stimuli. Importantly, such an enhancement effect was absent in dyslexic readers. Moreover, the auditory network (bilateral superior temporal regions plus medial PFC) was dynamically modulated during audiovisual integration in fluent, but not in dyslexic readers. These results suggest that superior temporal dysfunction may underly poor audiovisual speech integration in readers with dyslexia. Copyright © 2017 IBRO. Published by Elsevier Ltd. All rights reserved.

It felt fluent, and I liked it: subjective feeling of fluency rather than objective fluency determines liking.

PubMed

Forster, Michael; Leder, Helmut; Ansorge, Ulrich

2013-04-01

According to the processing-fluency explanation of aesthetics, more fluently processed stimuli are preferred (R. Reber, N. Schwarz, & P. Winkielman, 2004, Processing fluency and aesthetic pleasure: Is beauty in the perceiver's processing experience? Personality and Social Psychology Review, Vol. 8, pp. 364-382.). In this view, the subjective feeling of ease of processing is considered important, but this has not been directly tested in perceptual processing. In two experiments, we therefore objectively manipulated fluency (ease of processing) with subliminal perceptual priming (Study 1) and variations in presentation durations (Study 2). We assessed the impact of objective fluency on feelings of fluency and liking, as well as their interdependence. In line with the processing-fluency account, we found that objectively more fluent images were indeed judged as more fluent and were also liked more. Moreover, differences in liking were even stronger when data were analyzed according to felt fluency. These findings demonstrate that perceptual fluency is not only explicitly felt, it can also be reported and is an important determinant of liking. PsycINFO Database Record (c) 2013 APA, all rights reserved.

The Contribution of Phonological Awareness to Reading Fluency and Its Individual Sub-skills in Readers Aged 9- to 12-years

PubMed Central

Elhassan, Zena; Crewther, Sheila G.; Bavin, Edith L.

2017-01-01

Research examining phonological awareness (PA) contributions to reading in established readers of different skill levels is limited. The current study examined the contribution of PA to phonological decoding, visual word recognition, reading rate, and reading comprehension in 124 fourth to sixth grade children (aged 9–12 years). On the basis of scores on the FastaReada measure of reading fluency participants were allocated to one of three reading ability categories: dysfluent (n = 47), moderate (n = 38) and fluent (n = 39). For the dysfluent group, PA contributed significantly to all reading measures except rate, but in the moderate group only to phonological decoding. PA did not influence performances on any of the reading measures examined for the fluent reader group. The results support the notion that fluency is characterized by a shift from conscious decoding to rapid and accurate visual recognition of words. Although PA may be influential in reading development, the results of the current study show that it is not sufficient for fluent reading. PMID:28443048

The Contribution of Phonological Awareness to Reading Fluency and Its Individual Sub-skills in Readers Aged 9- to 12-years.

PubMed

Elhassan, Zena; Crewther, Sheila G; Bavin, Edith L

2017-01-01

Research examining phonological awareness (PA) contributions to reading in established readers of different skill levels is limited. The current study examined the contribution of PA to phonological decoding, visual word recognition, reading rate, and reading comprehension in 124 fourth to sixth grade children (aged 9-12 years). On the basis of scores on the FastaReada measure of reading fluency participants were allocated to one of three reading ability categories: dysfluent ( n = 47), moderate ( n = 38) and fluent ( n = 39). For the dysfluent group, PA contributed significantly to all reading measures except rate, but in the moderate group only to phonological decoding. PA did not influence performances on any of the reading measures examined for the fluent reader group. The results support the notion that fluency is characterized by a shift from conscious decoding to rapid and accurate visual recognition of words. Although PA may be influential in reading development, the results of the current study show that it is not sufficient for fluent reading.

Aerodynamic Analysis of the M33 Projectile Using the CFX Code

DTIC Science & Technology

2011-12-01

is unlimited 12b. DISTRIBUTION CODE A 13. ABSTRACT (maximum 200 words) The M33 projectile has been analyzed using the ANSYS CFX code that is based...analyzed using the ANSYS CFX code that is based on the numerical solution of the full Navier-Stokes equations. Simulation data were obtained...using the CFX code. The ANSYS - CFX code is a commercial CFD program used to simulate fluid flow in a variety of applications such as gas turbine

Energy Codes at a Glance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Pamala C.; Richman, Eric E.

2008-09-01

Feeling dim from energy code confusion? Read on to give your inspections a charge. The U.S. Department of Energy’s Building Energy Codes Program addresses hundreds of inquiries from the energy codes community every year. This article offers clarification for topics of confusion submitted to BECP Technical Support of interest to electrical inspectors, focusing on the residential and commercial energy code requirements based on the most recently published 2006 International Energy Conservation Code® and ANSI/ASHRAE/IESNA1 Standard 90.1-2004.

Technology Infusion of CodeSonar into the Space Network Ground Segment

NASA Technical Reports Server (NTRS)

Benson, Markland J.

2009-01-01

This slide presentation reviews the applicability of CodeSonar to the Space Network software. CodeSonar is a commercial off the shelf system that analyzes programs written in C, C++ or Ada for defects in the code. Software engineers use CodeSonar results as an input to the existing source code inspection process. The study is focused on large scale software developed using formal processes. The systems studied are mission critical in nature but some use commodity computer systems.

Wind turbine design codes: A comparison of the structural response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buhl, M.L. Jr.; Wright, A.D.; Pierce, K.G.

2000-03-01

The National Wind Technology Center (NWTC) of the National Renewable Energy Laboratory is continuing a comparison of several computer codes used in the design and analysis of wind turbines. The second part of this comparison determined how well the programs predict the structural response of wind turbines. In this paper, the authors compare the structural response for four programs: ADAMS, BLADED, FAST{_}AD, and YawDyn. ADAMS is a commercial, multibody-dynamics code from Mechanical Dynamics, Inc. BLADED is a commercial, performance and structural-response code from Garrad Hassan and Partners Limited. FAST{_}AD is a structural-response code developed by Oregon State University and themore » University of Utah for the NWTC. YawDyn is a structural-response code developed by the University of Utah for the NWTC. ADAMS, FAST{_}AD, and YawDyn use the University of Utah's AeroDyn subroutine package for calculating aerodynamic forces. Although errors were found in all the codes during this study, once they were fixed, the codes agreed surprisingly well for most of the cases and configurations that were evaluated. One unresolved discrepancy between BLADED and the AeroDyn-based codes was when there was blade and/or teeter motion in addition to a large yaw error.« less

28 CFR 36.602 - General rule.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.602 General... that a code meets or exceeds the minimum requirements of the Act for the accessibility and usability of...

28 CFR 36.602 - General rule.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.602 General... that a code meets or exceeds the minimum requirements of the Act for the accessibility and usability of...

28 CFR 36.602 - General rule.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.602 General... that a code meets or exceeds the minimum requirements of the Act for the accessibility and usability of...

28 CFR 36.602 - General rule.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.602 General... that a code meets or exceeds the minimum requirements of the Act for the accessibility and usability of...

28 CFR 36.602 - General rule.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.602 General... that a code meets or exceeds the minimum requirements of the Act for the accessibility and usability of...

a Framework for Distributed Mixed Language Scientific Applications

NASA Astrophysics Data System (ADS)

Quarrie, D. R.

The Object Management Group has defined an architecture (CORBA) for distributed object applications based on an Object Request Broker and Interface Definition Language. This project builds upon this architecture to establish a framework for the creation of mixed language scientific applications. A prototype compiler has been written that generates FORTRAN 90 or Eiffel stubs and skeletons and the required C++ glue code from an input IDL file that specifies object interfaces. This generated code can be used directly for non-distributed mixed language applications or in conjunction with the C++ code generated from a commercial IDL compiler for distributed applications. A feasibility study is presently underway to see whether a fully integrated software development environment for distributed, mixed-language applications can be created by modifying the back-end code generator of a commercial CASE tool to emit IDL.

Equivalent Linearization Analysis of Geometrically Nonlinear Random Vibrations Using Commercial Finite Element Codes

NASA Technical Reports Server (NTRS)

Rizzi, Stephen A.; Muravyov, Alexander A.

2002-01-01

Two new equivalent linearization implementations for geometrically nonlinear random vibrations are presented. Both implementations are based upon a novel approach for evaluating the nonlinear stiffness within commercial finite element codes and are suitable for use with any finite element code having geometrically nonlinear static analysis capabilities. The formulation includes a traditional force-error minimization approach and a relatively new version of a potential energy-error minimization approach, which has been generalized for multiple degree-of-freedom systems. Results for a simply supported plate under random acoustic excitation are presented and comparisons of the displacement root-mean-square values and power spectral densities are made with results from a nonlinear time domain numerical simulation.

Ice Accretion Calculations for a Commercial Transport Using the LEWICE3D, ICEGRID3D and CMARC Programs

NASA Technical Reports Server (NTRS)

Bidwell, Colin S.; Pinella, David; Garrison, Peter

1999-01-01

Collection efficiency and ice accretion calculations were made for a commercial transport using the NASA Lewis LEWICE3D ice accretion code, the ICEGRID3D grid code and the CMARC panel code. All of the calculations were made on a Windows 95 based personal computer. The ice accretion calculations were made for the nose, wing, horizontal tail and vertical tail surfaces. Ice shapes typifying those of a 30 minute hold were generated. Collection efficiencies were also generated for the entire aircraft using the newly developed unstructured collection efficiency method. The calculations highlight the flexibility and cost effectiveness of the LEWICE3D, ICEGRID3D, CMARC combination.

Aeroelastic Tailoring Study of N+2 Low-Boom Supersonic Commercial Transport Aircraft

NASA Technical Reports Server (NTRS)

Pak, Chan-gi

2015-01-01

The Lockheed Martins N+2 Low-boom Supersonic Commercial Transport (LSCT) aircraft is optimized in this study through the use of a multidisciplinary design optimization tool developed at the NASA Armstrong Flight Research Center. A total of 111 design variables are used in the first optimization run. Total structural weight is the objective function in this optimization run. Design requirements for strength, buckling, and flutter are selected as constraint functions during the first optimization run. The MSC Nastran code is used to obtain the modal, strength, and buckling characteristics. Flutter and trim analyses are based on ZAERO code and landing and ground control loads are computed using an in-house code.

The Optimal Convergence Rate of the p-Version of the Finite Element Method.

DTIC Science & Technology

1985-10-01

commercial and research codes. The p-version and h-p versions are new developments. There is only one commercial code, the system PROBE ( Noetic Tech, St...Louis). The theoretical aspects have been studied only recently. The first theoretical paper appeared in 1981 (see [7)). See also [1), [7], [81, [9...model problem (2.2) (2.3) is a classical case of the elliptic equation problem on a nonsmooth domain. The structure of this problem is well studied

Preliminary Computational Fluid Dynamics (CFD) Simulation of EIIB Push Barge in Shallow Water

NASA Astrophysics Data System (ADS)

Beneš, Petr; Kollárik, Róbert

2011-12-01

This study presents preliminary CFD simulation of EIIb push barge in inland conditions using CFD software Ansys Fluent. The RANSE (Reynolds Averaged Navier-Stokes Equation) methods are used for the viscosity solution of turbulent flow around the ship hull. Different RANSE methods are used for the comparison of their results in ship resistance calculations, for selecting the appropriate and removing inappropriate methods. This study further familiarizes on the creation of geometrical model which considers exact water depth to vessel draft ratio in shallow water conditions, grid generation, setting mathematical model in Fluent and evaluation of the simulations results.

Healthy brain connectivity predicts atrophy progression in non-fluent variant of primary progressive aphasia.

PubMed

Mandelli, Maria Luisa; Vilaplana, Eduard; Brown, Jesse A; Hubbard, H Isabel; Binney, Richard J; Attygalle, Suneth; Santos-Santos, Miguel A; Miller, Zachary A; Pakvasa, Mikhail; Henry, Maya L; Rosen, Howard J; Henry, Roland G; Rabinovici, Gil D; Miller, Bruce L; Seeley, William W; Gorno-Tempini, Maria Luisa

2016-10-01

Neurodegeneration has been hypothesized to follow predetermined large-scale networks through the trans-synaptic spread of toxic proteins from a syndrome-specific epicentre. To date, no longitudinal neuroimaging study has tested this hypothesis in vivo in frontotemporal dementia spectrum disorders. The aim of this study was to demonstrate that longitudinal progression of atrophy in non-fluent/agrammatic variant primary progressive aphasia spreads over time from a syndrome-specific epicentre to additional regions, based on their connectivity to the epicentre in healthy control subjects. The syndrome-specific epicentre of the non-fluent/agrammatic variant of primary progressive aphasia was derived in a group of 10 mildly affected patients (clinical dementia rating equal to 0) using voxel-based morphometry. From this region, the inferior frontal gyrus (pars opercularis), we derived functional and structural connectivity maps in healthy controls (n = 30) using functional magnetic resonance imaging at rest and diffusion-weighted imaging tractography. Graph theory analysis was applied to derive functional network features. Atrophy progression was calculated using voxel-based morphometry longitudinal analysis on 34 non-fluent/agrammatic patients. Correlation analyses were performed to compare volume changes in patients with connectivity measures of the healthy functional and structural speech/language network. The default mode network was used as a control network. From the epicentre, the healthy functional connectivity network included the left supplementary motor area and the prefrontal, inferior parietal and temporal regions, which were connected through the aslant, superior longitudinal and arcuate fasciculi. Longitudinal grey and white matter changes were found in the left language-related regions and in the right inferior frontal gyrus. Functional connectivity strength in the healthy speech/language network, but not in the default network, correlated with longitudinal grey matter changes in the non-fluent/agrammatic variant of primary progressive aphasia. Graph theoretical analysis of the speech/language network showed that regions with shorter functional paths to the epicentre exhibited greater longitudinal atrophy. The network contained three modules, including a left inferior frontal gyrus/supplementary motor area, which was most strongly connected with the epicentre. The aslant tract was the white matter pathway connecting these two regions and showed the most significant correlation between fractional anisotropy and white matter longitudinal atrophy changes. This study showed that the pattern of longitudinal atrophy progression in the non-fluent/agrammatic variant of primary progressive aphasia relates to the strength of connectivity in pre-determined functional and structural large-scale speech production networks. These findings support the hypothesis that the spread of neurodegeneration occurs by following specific anatomical and functional neuronal network architectures. © The Author (2016). Published by Oxford University Press on behalf of the Guarantors of Brain. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

16 CFR 14.12 - Use of secret coding in marketing research.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Use of secret coding in marketing research... STATEMENTS § 14.12 Use of secret coding in marketing research. (a) The Federal Trade Commission has determined to close its industry-wide investigation of marketing research firms that was initiated in...

16 CFR 14.12 - Use of secret coding in marketing research.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Use of secret coding in marketing research... STATEMENTS § 14.12 Use of secret coding in marketing research. (a) The Federal Trade Commission has determined to close its industry-wide investigation of marketing research firms that was initiated in...

16 CFR 14.12 - Use of secret coding in marketing research.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Use of secret coding in marketing research... STATEMENTS § 14.12 Use of secret coding in marketing research. (a) The Federal Trade Commission has determined to close its industry-wide investigation of marketing research firms that was initiated in...

16 CFR 14.12 - Use of secret coding in marketing research.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Use of secret coding in marketing research... STATEMENTS § 14.12 Use of secret coding in marketing research. (a) The Federal Trade Commission has determined to close its industry-wide investigation of marketing research firms that was initiated in...

16 CFR 14.12 - Use of secret coding in marketing research.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Use of secret coding in marketing research... STATEMENTS § 14.12 Use of secret coding in marketing research. (a) The Federal Trade Commission has determined to close its industry-wide investigation of marketing research firms that was initiated in...

The Role of Emotion in Memory for Television Commercials.

ERIC Educational Resources Information Center

Friestad, Marian; Thorson, Esther

A study applied an associative coding model to discern how emotions experienced during television commercials affect the strength and content of viewer memory for the commercials. Subjects, 25 males and 49 females enrolled at a large midwestern university, tested the model. Emotion was indexed by having viewers continuously turn a dial as they…

12 CFR 201.110 - Goods held by persons employed by owner.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Board has taken into consideration the changes that have occurred in commercial law and practice since 1933. Modern commercial law, embodied in the Uniform Commercial Code, refers to “perfecting security interests” rather than “securing title” to goods. The Board believes that if, under State law, the issuance...

New primary renal diagnosis codes for the ERA-EDTA

PubMed Central

Venkat-Raman, Gopalakrishnan; Tomson, Charles R.V.; Gao, Yongsheng; Cornet, Ronald; Stengel, Benedicte; Gronhagen-Riska, Carola; Reid, Chris; Jacquelinet, Christian; Schaeffner, Elke; Boeschoten, Els; Casino, Francesco; Collart, Frederic; De Meester, Johan; Zurriaga, Oscar; Kramar, Reinhard; Jager, Kitty J.; Simpson, Keith

2012-01-01

The European Renal Association-European Dialysis and Transplant Association (ERA-EDTA) Registry has produced a new set of primary renal diagnosis (PRD) codes that are intended for use by affiliated registries. It is designed specifically for use in renal centres and registries but is aligned with international coding standards supported by the WHO (International Classification of Diseases) and the International Health Terminology Standards Development Organization (SNOMED Clinical Terms). It is available as supplementary material to this paper and free on the internet for non-commercial, clinical, quality improvement and research use, and by agreement with the ERA-EDTA Registry for use by commercial organizations. Conversion between the old and the new PRD codes is possible. The new codes are very flexible and will be actively managed to keep them up-to-date and to ensure that renal medicine can remain at the forefront of the electronic revolution in medicine, epidemiology research and the use of decision support systems to improve the care of patients. PMID:23175621

Thermal modeling of a vertical dry storage cask for used nuclear fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Jie; Liu, Yung Y.

2016-05-01

Thermal modeling of temperature profiles of dry casks has been identified as a high-priority item in a U.S. Department of Energy gap analysis. In this work, a three-dimensional model of a vertical dry cask has been constructed for computer simulation by using the ANSYS/FLUENT code. The vertical storage cask contains a welded canister for 32 Pressurized Water Reactor (PWR) used-fuel assemblies with a total decay heat load of 34 kW. To simplify thermal calculations, an effective thermal conductivity model for a 17 x 17 PWR used (or spent)-fuel assembly was developed and used in the simulation of thermal performance. Themore » effects of canister fill gas (helium or nitrogen), internal pressure (1-6 atm), and basket material (stainless steel or aluminum alloy) were studied to determine the peak cladding temperature (PCT) and the canister surface temperatures (CSTs). The results showed that high thermal conductivity of the basket material greatly enhances heat transfer and reduces the PCT. The results also showed that natural convection affects both PCT and the CST profile, while the latter depends strongly on the type of fill gas and canister internal pressure. Of particular interest to condition and performance monitoring is the identification of canister locations where significant temperature change occurs after a canister is breached and the fill gas changes from high-pressure helium to ambient air. This study provided insight on the thermal performance of a vertical storage cask containing high-burnup fuel, and helped advance the concept of monitoring CSTs as a means to detect helium leakage from a welded canister. The effects of blockage of air inlet vents on the cask's thermal performance were studied. The simulation were validated by comparing the results against data obtained from the temperature measurements of a commercial cask.« less

Flow Control Under Low-Pressure Turbine Conditions Using Pulsed Jets

NASA Technical Reports Server (NTRS)

Volino, Ralph J.; Ibrahim, Mounir B.

2012-01-01

This publication is the final report of research performed under an NRA/Cooperative Interagency Agreement, and includes a supplemental CD-ROM with detailed data. It is complemented by NASA/CR-2012-217416 and NASA/CR-2012-217417 which include a Ph.D. Dissertation and an M.S. thesis respectively, performed under this contract. In this study the effects of unsteady wakes and flow control using vortex generator jets (VGJs) were studied experimentally and computationally on the flow over the L1A low pressure turbine (LPT) airfoil. The experimental facility was a six passage linear cascade in a low speed wind tunnel at the U.S. Naval Academy. In parallel, computational work using the commercial code FLUENT (ANSYS, Inc.) was performed at Cleveland State University, using Unsteady Reynolds Averaged Navier Stokes (URANS) and Large Eddy Simulations (LES) methods. In the first phase of the work, the baseline flow was documented under steady inflow conditions without flow control. URANS calculations were done using a variety of turbulence models. In the second phase of the work, flow control was added using steady and pulsed vortex generator jets. The VGJs successfully suppressed separation and reduced aerodynamic losses. Pulsed operation was more effective and mass flow requirements are very low. Numerical simulations of the VGJs cases showed that URANS failed to capture the effect of the jets. LES results were generally better. In the third phase, effects of unsteady wakes were studied. Computations with URANS and LES captured the wake effect and generally predicted separation and reattachment to match the experiments. Quantitatively the results were mixed. In the final phase of the study, wakes and VGJs were combined and synchronized using various timing schemes. The timing of the jets with respect to the wakes had some effect, but in general once the disturbance frequency was high enough to control separation, the timing was not very important.

Flow Control Under Low-Pressure Turbine Conditions Using Pulsed Jets: Experimental Data Archive

NASA Technical Reports Server (NTRS)

Volino, Ralph J.; Ibrahim, Mounir B.

2012-01-01

This publication is the final report of research performed under an NRA/Cooperative Interagency Agreement, and includes a supplemental CD-ROM with detailed data. It is complemented by NASA/CR-2012-217416 and NASA/CR-2012-217417 which include a Ph.D. Dissertation and an M.S. thesis respectively, performed under this contract. In this study the effects of unsteady wakes and flow control using vortex generator jets (VGJs) were studied experimentally and computationally on the flow over the L1A low pressure turbine (LPT) airfoil. The experimental facility was a six passage linear cascade in a low speed wind tunnel at the U.S. Naval Academy. In parallel, computational work using the commercial code FLUENT (ANSYS, Inc.) was performed at Cleveland State University, using Unsteady Reynolds Averaged Navier Stokes (URANS) and Large Eddy Simulations (LES) methods. In the first phase of the work, the baseline flow was documented under steady inflow conditions without flow control. URANS calculations were done using a variety of turbulence models. In the second phase of the work, flow control was added using steady and pulsed vortex generator jets. The VGJs successfully suppressed separation and reduced aerodynamic losses. Pulsed operation was more effective and mass flow requirements are very low. Numerical simulations of the VGJs cases showed that URANS failed to capture the effect of the jets. LES results were generally better. In the third phase, effects of unsteady wakes were studied. Computations with URANS and LES captured the wake effect and generally predicted separation and reattachment to match the experiments. Quantitatively the results were mixed. In the final phase of the study, wakes and VGJs were combined and synchronized using various timing schemes. The timing of the jets with respect to the wakes had some effect, but in general once the disturbance frequency was high enough to control separation, the timing was not very important. This is the supplemental CD-ROM

Internal Flow Simulation of Enhanced Performance Solid Rocket Booster for the Space Transportation System

NASA Technical Reports Server (NTRS)

Ahmad, Rashid A.; McCool, Alex (Technical Monitor)

2001-01-01

An enhanced performance solid rocket booster concept for the space shuttle system has been proposed. The concept booster will have strong commonality with the existing, proven, reliable four-segment Space Shuttle Reusable Solid Rocket Motors (RSRM) with individual component design (nozzle, insulator, etc.) optimized for a five-segment configuration. Increased performance is desirable to further enhance safety/reliability and/or increase payload capability. Performance increase will be achieved by adding a fifth propellant segment to the current four-segment booster and opening the throat to accommodate the increased mass flow while maintaining current pressure levels. One development concept under consideration is the static test of a "standard" RSRM with a fifth propellant segment inserted and appropriate minimum motor modifications. Feasibility studies are being conducted to assess the potential for any significant departure in component performance/loading from the well-characterized RSRM. An area of concern is the aft motor (submerged nozzle inlet, aft dome, etc.) where the altered internal flow resulting from the performance enhancing features (25% increase in mass flow rate, higher Mach numbers, modified subsonic nozzle contour) may result in increased component erosion and char. To assess this issue and to define the minimum design changes required to successfully static test a fifth segment RSRM engineering test motor, internal flow studies have been initiated. Internal aero-thermal environments were quantified in terms of conventional convective heating and discrete phase alumina particle impact/concentration and accretion calculations via Computational Fluid Dynamics (CFD) simulation. Two sets of comparative CFD simulations of the RSRM and the five-segment (IBM) concept motor were conducted with CFD commercial code FLUENT. The first simulation involved a two-dimensional axi-symmetric model of the full motor, initial grain RSRM. The second set of analyses included three-dimensional models of the RSRM and FSM aft motors with four-degree vectored nozzles.

Monitoring compliance with the International Code of Marketing of Breastmilk Substitutes in west Africa: multisite cross sectional survey in Togo and Burkina Faso.

PubMed

Aguayo, Victor M; Ross, Jay S; Kanon, Souleyman; Ouedraogo, Andre N

2003-01-18

To monitor compliance with the International Code of Marketing of Breastmilk Substitutes in health systems, sales outlets, distribution points, and the news media in Togo and Burkina Faso, west Africa. Multisite cross sectional survey. Staff at 43 health facilities and 66 sales outlets and distribution points, 186 health providers, and 105 mothers of infants aged < or =5 months in 16 cities. Six (14%) health facilities had received donations of breast milk substitutes. All donations were being given to mothers free of charge. Health providers in five (12%) health facilities had received free samples of breast milk substitutes for purposes other than professional research or evaluation. Health professionals in five (12%) health facilities had received promotional gifts from manufacturers. Promotional materials of commercial breast milk substitutes were found in seven (16%) health facilities. Special displays to market commercial breast milk substitutes were found in 29 (44%) sales and distribution points. Forty commercial breast milk substitutes violated the labelling standards of the code: 21 were manufactured by Danone, 11 by Nestlé, and eight by other national and international manufacturers. Most (148, 90%) health providers had never heard of the code, and 66 mothers (63%) had never received any counselling on breast feeding by their health providers. In west Africa manufacturers are violating the code of marketing of breast milk substitutes. Comparable levels of code violations are observed with (Burkina Faso) or without (Togo) regulating legislation. Legislation must be accompanied by effective information, training, and monitoring systems to ensure that healthcare providers and manufacturers comply with evidence based practice and the code.

Numerical Simulation and Chaotic Analysis of an Aluminum Holding Furnace

NASA Astrophysics Data System (ADS)

Wang, Ji-min; Zhou, Yuan-yuan; Lan, Shen; Chen, Tao; Li, Jie; Yan, Hong-jie; Zhou, Jie-min; Tian, Rui-jiao; Tu, Yan-wu; Li, Wen-ke

2014-12-01

To achieve high heat efficiency, low pollutant emission and homogeneous melt temperature during thermal process of secondary aluminum, taking into account the features of aluminum alloying process, a CFD process model was developed and integrated with heat load and aluminum temperature control model. This paper presented numerical simulation of aluminum holding furnaces using the customized code based on FLUENT packages. Thermal behaviors of aluminum holding furnaces were investigated by probing into main physical fields such as flue gas temperature, velocity, and concentration, and combustion instability of aluminum holding process was represented by chaos theory. The results show that aluminum temperature uniform coefficient firstly decreases during heating phase, then increases and reduces alternately during holding phase, lastly rises during standing phase. Correlation dimension drops with fuel velocity. Maximal Lyapunov exponent reaches to a maximum when air-fuel ratio is close to 1. It would be a clear comprehension about each phase of aluminum holding furnaces to find new technology, retrofit furnace design, and optimize parameters combination.

Buoyancy Suppression in Gases at High Temperatures

NASA Technical Reports Server (NTRS)

Kuczmarski, Maria A.; Gokoglu, Suleyman A.

2005-01-01

The computational fluid dynamics code FLUENT was used to study Rayleigh instability at large temperature differences in a sealed gas-filled enclosure with a cold top surface and a heated bottom wall (Benard problem). Both steady state and transient calculations were performed. The results define the boundaries of instability in a system depending on the geometry, temperature and pressure. It is shown that regardless of how fast the bottom-wall temperature can be ramped up to minimize the time spent in the unstable region of fluid motion, the eventual stability of the system depends on the prevailing final pressure after steady state has been reached. Calculations also show that the final state of the system can be different depending on whether the result is obtained via a steady-state solution or is reached by transient calculations. Changes in the slope of the pressure-versus-time curve are found to be a very good indicator of changes in the flow patterns in the system.

Numerical modelling of heat transfer in a cavity due to liquid jet impingement for liquid supported stretch blow moulding

NASA Astrophysics Data System (ADS)

Smyth, Trevor; Menary, Gary; Geron, Marco

2018-05-01

Impingement of a liquid jet in a polymer cavity has been modelled numerically in this study. Liquid supported stretch blow moulding is a nascent polymer forming process using liquid as the forming medium to produce plastic bottles. The process derives from the conventional stretch blow moulding process which uses compressed air to deform the preform. Heat transfer away from the preform greatly increases when a liquid instead of a gas is flowing over a solid; in the blow moulding process the temperature of the preform is tightly controlled to achieve optimum forming conditions. A model was developed with Computational Fluid Dynamics code ANSYS Fluent which allows the extent of heat transfer between the incoming liquid and the solid preform to be determined in the initial transient stage, where a liquid jet enters an air filled preform. With this data, an approximation of the extent of cooling through the preform wall can be determined.

A Numerical Study of Spray Injected in a Gas Turbine Lean Pre-Mixed Pre-Vaporized Combustor

NASA Astrophysics Data System (ADS)

Amoresano, Amedeo; Cameretti, Maria Cristina; Tuccillo, Raffaele

2015-04-01

The authors have performed a numerical study to investigate the spray evolution in a modern gas turbine combustor of the Lean Pre-Mixed Pre-vaporized type. The CFD tool is able to simulate the injection conditions, by isolating and studying some specific phenomena. The calculations have been performed by using a 3-D fluid dynamic code, the FLUENT flow solver, by choosing the injection models on the basis of a comparative analysis with some experimental data, in terms of droplet diameters, obtained by PDA technique. In a first phase of the investigation, the numerical simulation refers to non-evaporating flow conditions, in order to validate the estimation of the fundamental spray parameters. Next, the calculations employ boundary conditions close to those occurring in the actual combustor operation, in order to predict the fuel vapour distribution throughout the premixing chamber. The results obtained allow the authors to perform combustion simulation in the whole domain.

Numerical investigations of cooling holes system role in the protection of the walls of a gas turbine combustion chamber

NASA Astrophysics Data System (ADS)

Ben Sik Ali, Ahlem; Kriaa, Wassim; Mhiri, Hatem; Bournot, Philippe

2012-05-01

Numerical simulations in a gas turbine Swirl stabilized combustor were conducted to investigate the effectiveness of a cooling system in the protection of combustor walls. The studied combustion chamber has a high degree of geometrical complexity related to the injection system as well as the cooling system based on a big distribution of small holes (about 3,390 holes) bored on the flame tube walls. Two cases were considered respectively the flame tube without and with its cooling system. The calculations were carried out using the industrial CFD code FLUENT 6.2. The various simulations made it possible to highlight the role of cooling holes in the protection of the flame tube walls against the high temperatures of the combustion products. In fact, the comparison between the results of the two studied cases demonstrated that the walls temperature can be reduced by about 800°C by the mean of cooling holes technique.

Comparing the production of complex sentences in Persian patients with post-stroke aphasia and non-damaged people with normal speaking.

PubMed

Mehri, Azar; Ghorbani, Askar; Darzi, Ali; Jalaie, Shohreh; Ashayeri, Hassan

2016-01-05

Cerebrovascular disease leading to stroke is the most common cause of aphasia. Speakers with agrammatic non-fluent aphasia have difficulties in production of movement-derived sentences such as passive sentences, topicalized constituents, and Wh-questions. To assess the production of complex sentences, some passive, topicalized and focused sentences were designed for patients with non-fluent Persian aphasic. Afterwards, patients' performance in sentence production was tested and compared with healthy non-damaged subjects. In this cross sectional study, a task was designed to assess the different types of sentences (active, passive, topicalized and focused) adapted to Persian structures. Seven Persian patients with post-stroke non-fluent agrammatic aphasia (5 men and 2 women) and seven healthy non-damaged subjects participated in this study. The computed tomography (CT) scan or magnetic resonance imaging (MRI) showed that all the patients had a single left hemisphere lesion involved middle cerebral artery (MCA), Broca`s area and in its white matter. In addition, based on Bedside version of Persian Western Aphasia Battery (P-WAB-1), all of them were diagnosed with moderate Broca aphasia. Then, the production task of Persian complex sentences was administered. There was a significant difference between four types of sentences in patients with aphasia [Degree of freedom (df) = 3, P < 0.001]. All the patients showed worse performance than the healthy participants in all the four types of sentence production (P < 0.050). In general, it is concluded that topicalized and focused sentences as non-canonical complex sentences in Persian are very difficult to produce for patients with agrammatic non-fluent aphasia. It seems that sentences with A-movement are simpler for the patients than sentences involving A`-movement; since they include shorter movements in compare to topicalized and focused sentences.

The effect of balance holes to centrifugal pump performance

NASA Astrophysics Data System (ADS)

Babayigit, O.; Ozgoren, M.; Aksoy, M. H.; Kocaaslan, O.

2017-07-01

The aim of this study is to analyze of a centrifugal pump with and without balance holes by using ANSYS-Fluent software. The pump used in the study is a commercial centrifugal pump consisting of two stages that is a model of Sempa Pump Company. Firstly, models of impeller, diffuser, suction and discharge sections of the centrifugal pump were separately drawn using Ansys and Solidworks software. Later, grid structures were generated on the flow volume of the pump. Turbulent flow volume was numerically solved by realizable k-є turbulence model. The flow analyses were focused on the centrifugal pump performance and the flow characteristics under different operational conditions with/without balance holes. Distributions of flow characteristics such as velocity and pressure distributions in the flow volume were also determined, numerically. The results of Computational Fluid Dynamics (CFD) with/without balance holes for the pump head and hydraulic efficiency on the design flow rate of 80 m3/h were found to be 81.5/91.3 m and 51.9/65.3%, respectively.

NEN Division Funding Gap Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Esch, Ernst I.; Goettee, Jeffrey D.; Desimone, David J.

The work in NEN Division revolves around proliferation detection. The sponsor funding model seems to have shifted over the last decades. For the past three lustra, sponsors are mainly interested in funding ideas and detection systems that are already at a technical readiness level 6 (TRL 6 -- one step below an industrial prototype) or higher. Once this level is reached, the sponsoring agency is willing to fund the commercialization, implementation, and training for the systems (TRL 8, 9). These sponsors are looking for a fast turnaround (1-2 years) technology development efforts to implement technology. To support the critical nationalmore » and international needs for nonprolifertion solutions, we have to maintain a fluent stream of subject matter expertise from the fundamental principals of radiation detection through prototype development all the way to the implementation and training of others. NEN Division has large funding gaps in the Valley of Death region. In the current competitive climate for nuclear nonproliferation projects, it is imminent to increase our lead in this field.« less

CFD modeling using PDF approach for investigating the flame length in rotary kilns

NASA Astrophysics Data System (ADS)

Elattar, H. F.; Specht, E.; Fouda, A.; Bin-Mahfouz, Abdullah S.

2016-12-01

Numerical simulations using computational fluid dynamics (CFD) are performed to investigate the flame length characteristics in rotary kilns using probability density function (PDF) approach. A commercial CFD package (ANSYS-Fluent) is employed for this objective. A 2-D axisymmetric model is applied to study the effect of both operating and geometric parameters of rotary kiln on the characteristics of the flame length. Three types of gaseous fuel are used in the present work; methane (CH4), carbon monoxide (CO) and biogas (50 % CH4 + 50 % CO2). Preliminary comparison study of 2-D modeling outputs of free jet flames with available experimental data is carried out to choose and validate the proper turbulence model for the present numerical simulations. The results showed that the excess air number, diameter of kiln air entrance, radiation modeling consideration and fuel type have remarkable effects on the flame length characteristics. Numerical correlations for the rotary kiln flame length are presented in terms of the studied kiln operating and geometric parameters within acceptable error.

Analysis of flow field characteristics in IC equipment chamber based on orthogonal design

NASA Astrophysics Data System (ADS)

Liu, W. F.; Yang, Y. Y.; Wang, C. N.

2017-01-01

This paper aims to study the influence of the configuration of processing chamber as a part of IC equipment on flow field characteristics. Four parameters, including chamber height, chamber diameter, inlet mass flow rate and outlet area, are arranged using orthogonally design method to study their influence on flow distribution in the processing chamber with the commercial software-Fluent. The velocity, pressure and temperature distribution above the holder were analysed respectively. The velocity difference value of the gas flow above the holder is defined as the evaluation criteria to evaluate the uniformity of the gas flow. The quantitative relationship between key parameters and the uniformity of gas flow was found through analysis of experimental results. According to our study, the chamber height is the most significant factor, and then follows the outlet area, chamber diameter and inlet mass flow rate. This research can provide insights into the study and design of configuration of etcher, plasma enhanced chemical vapor deposition (PECVD) equipment, and other systems with similar configuration and processing condition.

Electroosmotic flow and Joule heating in preparative continuous annular electrochromatography.

PubMed

Laskowski, René; Bart, Hans-Jörg

2015-09-01

An openFOAM "computational fluid dynamic" simulation model was developed for the description of local interaction of hydrodynamics and Joule heating in annular electrochromatography. A local decline of electrical conductivity of the background eluent is caused by an electrokinetic migration of ions resulting in higher Joule heat generation. The model equations consider the Navier-Stokes equation for incompressible fluids, the energy equation for stationary temperature fields, and the mass transfer equation for the electrokinetic flow. The simulations were embedded in commercial ANSYS Fluent software and in open-source environment openFOAM. The annular gap (1 mm width) contained an inorganic C8 reverse-phase monolith as stationary phase prepared by an in situ sol-gel process. The process temperature generated by Joule heating was determined by thermal camera system. The local hydrodynamics in the prototype was detected by a gravimetric contact-free measurement method and experimental and simulated values matched quite well. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Numerical investigation of the thermal behavior of heated natural composite materials

NASA Astrophysics Data System (ADS)

Qasim, S. M.; Mohammed, F. Abbas; Hashim, R.

2015-11-01

In the present work numerical investigation was carried out for laminar natural convection heat transfer from natural composite material (NCM). Three types of natural materials such as seed dates, egg shells, and feathers are mixed separately with polyester resin. Natural materials are added with different volume fraction (10%, 20%, and 30%) are heated with different heat flux (1078W/m2, 928W/m2, 750W/m2, 608W/m2, and 457W/m2) at (vertical, inclined, and horizontal) position. Continuity and Navier-Stocks equations are solved numerically in three dimensions using ANSYS FLUENT package 12.1 software commercial program. Numerical results showed the temperature distribution was affected for all types at volume fraction 30% and heat flux is 1078 W/m2, for different position. So, shows that the plumes and temperature behavior are affected by the air and the distance from heat source. Numerical results showed acceptable agreement with the experimental previous results.

Numerical investigation of solid mixing in a fluidized bed coating process

NASA Astrophysics Data System (ADS)

Kenche, Venkatakrishna; Feng, Yuqing; Ying, Danyang; Solnordal, Chris; Lim, Seng; Witt, Peter J.

2013-06-01

Fluidized beds are widely used in many process industries including the food and pharmaceutical sectors. Despite being an intensive research area, there are no design rules or correlations that can be used to quantitatively predict the solid mixing in a specific system for a given set of operating conditions. This paper presents a numerical study of the gas and solid dynamics in a laboratory scale fluidized bed coating process used for food and pharmaceutical industries. An Eulerian-Eulerian model (EEM) with kinetic theory of granular flow is selected as the modeling technique, with the commercial computational fluid dynamics (CFD) software package ANSYS/Fluent being the numerical platform. The flow structure is investigated in terms of the spatial distribution of gas and solid flow. The solid mixing has been evaluated under different operating conditions. It was found that the solid mixing rate in the horizontal direction is similar to that in the vertical direction under the current design and operating conditions. It takes about 5 s to achieve good mixing.

Country Report on Building Energy Codes in Australia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shui, Bin; Evans, Meredydd; Somasundaram, Sriram

2009-04-02

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America (U.S.). This reports gives an overview of the development of building energy codes in Australia, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, and lighting) for commercial and residential buildings in Australia.

76 FR 13101 - Building Energy Codes Program: Presenting and Receiving Comments to DOE Proposed Changes to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-10

.... The IgCC is intended to provide a green model building code provisions for new and existing commercial... DEPARTMENT OF ENERGY 10 CFR Part 430 [Docket No. EERE-2011-BT-BC-0009] Building Energy Codes Program: Presenting and Receiving Comments to DOE Proposed Changes to the International Green Construction...

The Suspension of the National Association of Broadcasters' Code and Its Effects on the Regulation of Advertising.

ERIC Educational Resources Information Center

Maddox, Lynda M.; Zanot, Eric J.

After a federal judge ruled in 1982 that some stipulations of the National Association of Broadcasters' (NAB) Television Code were violating antitrust laws, the NAB responded by suspending all code operations. Effects of the suspension on network advertising included (1) the disappearance of preclearance for commercials about cholesterol-related…

Uneven Commercialization: Contradiction and Conflict in the Identity and Practices of American Universities

ERIC Educational Resources Information Center

Kleinman, Daniel Lee; Osley-Thomas, Robert

2014-01-01

In this paper, drawing on magazines read by US academic leaders, we explore the spread of commercial language into the world of higher education. We ask whether commercial codes are taken for granted, considered routine, and common sense in academic settings. We develop a multidimensional approach, considering two practices, strategic planning and…

A Code of Ethics and Standards for Outer-Space Commerce

NASA Astrophysics Data System (ADS)

Livingston, David M.

2002-01-01

Now is the time to put forth an effective code of ethics for businesses in outer space. A successful code would be voluntary and would actually promote the growth of individual companies, not hinder their efforts to provide products and services. A properly designed code of ethics would ensure the development of space commerce unfettered by government-created barriers. Indeed, if the commercial space industry does not develop its own professional code of ethics, government- imposed regulations would probably be instituted. Should this occur, there is a risk that the development of off-Earth commerce would become more restricted. The code presented in this paper seeks to avoid the imposition of new barriers to space commerce as well as make new commercial space ventures easier to develop. The proposed code consists of a preamble, which underscores basic values, followed by a number of specific principles. For the most part, these principles set forth broad commitments to fairness and integrity with respect to employees, consumers, business transactions, political contributions, natural resources, off-Earth development, designated environmental protection zones, as well as relevant national and international laws. As acceptance of this code of ethics grows within the industry, general modifications will be necessary to accommodate the different types of businesses entering space commerce. This uniform applicability will help to assure that the code will not be perceived as foreign in nature, potentially restrictive, or threatening. Companies adopting this code of ethics will find less resistance to their space development plans, not only in the United States but also from nonspacefaring nations. Commercial space companies accepting and refining this code would demonstrate industry leadership and an understanding that will serve future generations living, working, and playing in space. Implementation of the code would also provide an off-Earth precedent for a modified free-market economy. With the code as a backdrop, a colonial or Wild West mentality would become less likely. Off-Earth resources would not be as susceptible to plunder and certain areas could be designated as environmental reserves for the benefit of all. Companies would find it advantageous to balance the goal of wealth maximization with ethical principles if such a strategy enhances the long-term prospects for success.

48 CFR 52.212-1 - Instructions to Offerors-Commercial Items.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Classification System (NAICS) code and small business size standard. The NAICS code and small business size... Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of...

Representing and reasoning about program in situation calculus

NASA Astrophysics Data System (ADS)

Yang, Bo; Zhang, Ming-yi; Wu, Mao-nian; Xie, Gang

2011-12-01

Situation calculus is an expressive tool for modeling dynamical system in artificial intelligence, changes in a dynamical world is represented naturally by the notions of action, situation and fluent in situation calculus. Program can be viewed as a discrete dynamical system, so it is possible to model program with situation calculus. To model program written in a smaller core programming language CL, notion of fluent is expanded for representing value of expression. Together with some functions returning concerned objects from expressions, a basic action theory of CL programming is constructed. Under such a theory, some properties of program, such as correctness and termination can be reasoned about.

Measurement of trained speech patterns in stuttering: interjudge and intrajudge agreement of experts by means of modified time-interval analysis.

PubMed

Alpermann, Anke; Huber, Walter; Natke, Ulrich; Willmes, Klaus

2010-09-01

Improved fluency after stuttering therapy is usually measured by the percentage of stuttered syllables. However, outcome studies rarely evaluate the use of trained speech patterns that speakers use to manage stuttering. This study investigated whether the modified time interval analysis can distinguish between trained speech patterns, fluent speech, and stuttered speech. Seventeen German experts on stuttering judged a speech sample on two occasions. Speakers of the sample were stuttering adults, who were not undergoing therapy, as well as participants in a fluency shaping and a stuttering modification therapy. Results showed satisfactory inter-judge and intra-judge agreement above 80%. Intervals with trained speech patterns were identified as consistently as stuttered and fluent intervals. We discuss limitations of the study, as well as implications of our findings for the development of training for identification of trained speech patterns and future outcome studies. The reader will be able to (a) explain different methods to measure the use of trained speech patterns, (b) evaluate whether German experts are able to discriminate intervals with trained speech patterns reliably from fluent and stuttered intervals and (c) describe how the measurement of trained speech patterns can contribute to outcome studies.

Constraint-induced aphasia therapy versus intensive semantic treatment in fluent aphasia.

PubMed

Wilssens, Ineke; Vandenborre, Dorien; van Dun, Kim; Verhoeven, Jo; Visch-Brink, Evy; Mariën, Peter

2015-05-01

The authors compared the effectiveness of 2 intensive therapy methods: Constraint-Induced Aphasia Therapy (CIAT; Pulvermüller et al., 2001) and semantic therapy (BOX; Visch-Brink & Bajema, 2001). Nine patients with chronic fluent aphasia participated in a therapy program to establish behavioral treatment outcomes. Participants were randomly assigned to one of two groups (CIAT or BOX). Intensive therapy significantly improved verbal communication. However, BOX treatment showed a more pronounced improvement on two communication-namely, a standardized assessment for verbal communication, the Amsterdam Nijmegen Everyday Language Test (Blomert, Koster, & Kean, 1995), and a subjective rating scale, the Communicative Effectiveness Index (Lomas et al., 1989). All participants significantly improved on one (or more) subtests of the Aachen Aphasia Test (Graetz, de Bleser, & Willmes, 1992), an impairment-focused assessment. There was a treatment-specific effect. BOX treatment had a significant effect on language comprehension and semantics, whereas CIAT treatment affected language production and phonology. The findings indicate that in patients with fluent aphasia, (a) intensive treatment has a significant effect on language and verbal communication, (b) intensive therapy results in selective treatment effects, and (c) an intensive semantic treatment shows a more striking mean improvement on verbal communication in comparison with communication-based CIAT treatment.

Improvement of language functions in a chronic non-fluent post-stroke aphasic patient following bilateral sequential theta burst magnetic stimulation.

PubMed

Vuksanović, Jasmina; Jelić, Milan B; Milanović, Sladjan D; Kačar, Katarina; Konstantinović, Ljubica; Filipović, Saša R

2015-01-01

In chronic non-fluent aphasia patients, inhibition of the intact right hemisphere (RH), by transcranial magnetic stimulation (TMS) or similar methods, can induce improvement in language functions. The supposed mechanism behind this improvement is a release of preserved left hemisphere (LH) language networks from RH transcallosal inhibition. Direct stimulation of the damaged LH can sometimes bring similar results too. Therefore, we developed a novel treatment approach that combined direct LH (Broca's area (BA)) stimulation, by intermittent theta burst stimulation (TBS), with homologue RH area's inhibition, by continuous TBS. We present the results of application of 15 daily sessions of the described treatment approach in a right-handed patient with chronic post-stroke non-fluent aphasia. The intervention appeared to improve several language functions, but most notably propositional speech, semantic fluency, short-term verbal memory, and verbal learning. Bilateral TBS modulation of activation of the language-related areas of both hemispheres seems to be a feasible and promising way to induce recovery in chronic aphasic patients. Due to potentially cumulative physiological effects of bilateral stimulation, the improvements may be even greater than following unilateral interventions.

Prevalence of Prescription Opioid Misuse/Abuse as Determined by International Classification of Diseases Codes: A Systematic Review.

PubMed

Roland, Carl L; Lake, Joanita; Oderda, Gary M

2016-12-01

We conducted a systematic review to evaluate worldwide human English published literature from 2009 to 2014 on prevalence of opioid misuse/abuse in retrospective databases where International Classification of Diseases (ICD) codes were used. Inclusion criteria for the studies were use of a retrospective database, measured abuse, dependence, and/or poisoning using ICD codes, stated prevalence or it could be derived, and documented time frame. A meta-analysis was not performed. A qualitative narrative synthesis was used, and 16 studies were included for data abstraction. ICD code use varies; 10 studies used ICD codes that encompassed all three terms: abuse, dependence, or poisoning. Eight studies limited determination of misuse/abuse to an opioid user population. Abuse prevalence among opioid users in commercial databases using all three terms of ICD codes varied depending on the opioid; 21 per 1000 persons (reformulated extended-release oxymorphone; 2011-2012) to 113 per 1000 persons (immediate-release opioids; 2010-2011). Abuse prevalence in general populations using all three ICD code terms ranged from 1.15 per 1000 persons (commercial; 6 months 2010) to 8.7 per 1000 persons (Medicaid; 2002-2003). Prevalence increased over time. When similar ICD codes are used, the highest prevalence is in US government-insured populations. Limiting population to continuous opioid users increases prevalence. Prevalence varies depending on ICD codes used, population, time frame, and years studied. Researchers using ICD codes to determine opioid abuse prevalence need to be aware of cautions and limitations.

Through the Past Decade: How Advanced Energy Design Guides have influenced the Design Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Bing; Athalye, Rahul A.

Advanced Energy Design Guides (AEDGs) were originally developed intended to provide a simple approach to building professionals seeking energy efficient building designs better than ASHRAE Standard 90.1. Since its first book was released in 2004, the AEDG series provided inspiration for the design industry and were seen by designers as a starting point for buildings that wished to go beyond minimum codes and standards. In addition, U.S. Department of Energy’s successful Commercial Building Partnerships (CBP) program leveraged many of the recommendations from the AEDGs to achieve 50% energy savings over ASHRAE Standard 90.1-2004 for prototypical designs of large commercial entitiesmore » in the retail, banking and lodging sectors. Low-energy technologies and strategies developed during the CBP process have been applied by commercial partners throughout their national portfolio of buildings. Later, the AEDGs served as the perfect platform for both Standard 90.1 and ASHRAE’s high performance buildings standard, Standard 189.1. What was high performance a few years ago, however, has become minimum code today. Indeed, most of the prescriptive envelope component requirements in ASHRAE Standard 90.1-2013 are values recommended in the 50% AEDGs several years ago. Similarly, AEDG strategies and recommendations have penetrated the lighting and HVAC sections of both Standard 189.1 and Standard 90.1. Finally, as we look to the future of codes and standards, the AEDGs are serving as a blueprint for how minimum code requirements could be expressed. By customizing codes to specific building types, design strategies tailored for individual buildings could be prescribed as minimum code, just like in the AEDGs. This paper describes the impact that AEDGs have had over the last decade on the design industry and how they continue to influence the future of codes and Standards. From design professionals to code officials, everyone in the building industry has been affected by the AEDGs.« less

An examination of some safety issues among commercial motorcyclists in Nigeria: a case study.

PubMed

Arosanyin, Godwin Tunde; Olowosulu, Adekunle Taiwo; Oyeyemi, Gafar Matanmi

2013-01-01

The reduction of road crashes and injuries among motorcyclists in Nigeria requires a system inquiry into some safety issues at pre-crash, crash and post-crash stages to guide action plans. This paper examines safety issues such as age restriction, motorcycle engine capacity, highway code awareness, licence holding, helmet usage, crash involvement, rescue and payment for treatment among commercial motorcyclists. The primary data derived from a structured questionnaire administered to 334 commercial motorcyclists in Samaru, Zaria were analysed using descriptive statistics and logistic regression technique. There was total compliance with age restriction and motorcycle engine capacity. About 41.8% of the operators were not aware of the existence of the highway code. The odds of licence holding increased with highway code awareness, education with above senior secondary as the reference category and earnings. The odds of crash involvement decreased with highway code awareness, earnings and mode of operation. About 84% of the motorcyclists did not use crash helmet, in spite of being aware of the benefit, and 65.4% of motorcycle crashes was found to be with other road users. The promotion of safety among motorcyclists therefore requires strict traffic law enforcement and modification of road design to segregate traffic and protect pedestrians.

Study the velocity and pressure exerted in front of the filter surface in the kitchen hood system by using ANSYS

NASA Astrophysics Data System (ADS)

Asmuin, Norzelawati; Pairan, M. Rasidi; Isa, Norasikin Mat; Sies, Farid

2017-04-01

Commercial kitchen hood ventilation system is a device used to capture and filtered the plumes from cooking activities in the kitchen area. Nowadays, it is very popular in the industrial sector such as restaurant and hotel to provide hygiene food. This study focused at the KSA filter part which installed in the kitchen hood system, the purpose of this study is to identify the critical region which indicated by observing the velocity and pressure of plumes exerted at of KSA filter. It is important to know the critical location of the KSA filter in order to install the nozzle which will helps increase the filtration effectiveness. The ANSYS 16.1 (FLUENT) software as a tool used to simulate the kitchen hood systems which consist of KSA filter. The commercial kitchen hood system model has a dimension 700 mm width, 1600 mm length and 555 mm height. The system has two inlets and one outlet. The velocity of the plumes is set to be 0.235m/s and the velocity of the inlet capture jet is set to be 1.078m/s. The KSA filter is placed 45 degree from the y axis. The result shows the plumes has more tendency flowing pass through at the bottom part of KSA filter.

Development of 1D Liner Compression Code for IDL

NASA Astrophysics Data System (ADS)

Shimazu, Akihisa; Slough, John; Pancotti, Anthony

2015-11-01

A 1D liner compression code is developed to model liner implosion dynamics in the Inductively Driven Liner Experiment (IDL) where FRC plasmoid is compressed via inductively-driven metal liners. The driver circuit, magnetic field, joule heating, and liner dynamics calculations are performed at each time step in sequence to couple these effects in the code. To obtain more realistic magnetic field results for a given drive coil geometry, 2D and 3D effects are incorporated into the 1D field calculation through use of correction factor table lookup approach. Commercial low-frequency electromagnetic fields solver, ANSYS Maxwell 3D, is used to solve the magnetic field profile for static liner condition at various liner radius in order to derive correction factors for the 1D field calculation in the code. The liner dynamics results from the code is verified to be in good agreement with the results from commercial explicit dynamics solver, ANSYS Explicit Dynamics, and previous liner experiment. The developed code is used to optimize the capacitor bank and driver coil design for better energy transfer and coupling. FRC gain calculations are also performed using the liner compression data from the code for the conceptual design of the reactor sized system for fusion energy gains.

50 CFR 23.24 - What code is used to show the source of the specimen?

Code of Federal Regulations, 2010 CFR

2010-10-01

... (see § 23.42) propagated for commercial purposes. A (b) Bred-in-captivity wildlife (see § 23.41): (1.... (See paragraph (c)(1) of this section for an Appendix-I specimen bred for commercial purposes.) C (c) Bred in captivity or artificially propagated for commercial purposes (see §§ 23.46 and 23.47): (1) An...

50 CFR 23.24 - What code is used to show the source of the specimen?

Code of Federal Regulations, 2013 CFR

2013-10-01

... (see § 23.42) propagated for commercial purposes. A (b) Bred-in-captivity wildlife (see § 23.41): (1.... (See paragraph (c)(1) of this section for an Appendix-I specimen bred for commercial purposes.) C (c) Bred in captivity or artificially propagated for commercial purposes (see §§ 23.46 and 23.47): (1) An...

50 CFR 23.24 - What code is used to show the source of the specimen?

Code of Federal Regulations, 2014 CFR

2014-10-01

... (see § 23.42) propagated for commercial purposes. A (b) Bred-in-captivity wildlife (see § 23.41): (1.... (See paragraph (c)(1) of this section for an Appendix-I specimen bred for commercial purposes.) C (c) Bred in captivity or artificially propagated for commercial purposes (see §§ 23.46 and 23.47): (1) An...

50 CFR 23.24 - What code is used to show the source of the specimen?

Code of Federal Regulations, 2012 CFR

2012-10-01

... (see § 23.42) propagated for commercial purposes. A (b) Bred-in-captivity wildlife (see § 23.41): (1.... (See paragraph (c)(1) of this section for an Appendix-I specimen bred for commercial purposes.) C (c) Bred in captivity or artificially propagated for commercial purposes (see §§ 23.46 and 23.47): (1) An...

50 CFR 23.24 - What code is used to show the source of the specimen?

Code of Federal Regulations, 2011 CFR

2011-10-01

... (see § 23.42) propagated for commercial purposes. A (b) Bred-in-captivity wildlife (see § 23.41): (1.... (See paragraph (c)(1) of this section for an Appendix-I specimen bred for commercial purposes.) C (c) Bred in captivity or artificially propagated for commercial purposes (see §§ 23.46 and 23.47): (1) An...

Physician Reimbursement in Medicare Advantage Compared With Traditional Medicare and Commercial Health Insurance.

PubMed

Trish, Erin; Ginsburg, Paul; Gascue, Laura; Joyce, Geoffrey

2017-09-01

Nearly one-third of Medicare beneficiaries are enrolled in a Medicare Advantage (MA) plan, yet little is known about the prices that MA plans pay for physician services. Medicare Advantage insurers typically also sell commercial plans, and the extent to which MA physician reimbursement reflects traditional Medicare (TM) rates vs negotiated commercial prices is unclear. To compare prices paid for physician and other health care services in MA, traditional Medicare, and commercial plans. Retrospective analysis of claims data evaluating MA prices paid to physicians and for laboratory services and durable medical equipment between 2007 and 2012 in 348 US core-based statistical areas. The study population included all MA and commercial enrollees with a large national health insurer operating in both markets, as well as a 20% sample of TM beneficiaries. Enrollment in an MA plan. Mean reimbursement paid to physicians, laboratories, and durable medical equipment suppliers for MA and commercial enrollees relative to TM rates for 11 Healthcare Common Procedure Coding Systems (HCPCS) codes spanning 7 sites of care. The sample consisted of 144 million claims. Physician reimbursement in MA was more strongly tied to TM rates than commercial prices, although MA plans tended to pay physicians less than TM. For a mid-level office visit with an established patient (Current Procedural Terminology [CPT] code 99213), the mean MA price was 96.9% (95% CI, 96.7%-97.2%) of TM. Across the common physician services we evaluated, mean MA reimbursement ranged from 91.3% of TM for cataract removal in an ambulatory surgery center (CPT 66984; 95% CI, 90.7%-91.9%) to 102.3% of TM for complex evaluation and management of a patient in the emergency department (CPT 99285; 95% CI, 102.1%-102.6%). However, for laboratory services and durable medical equipment, where commercial prices are lower than TM rates, MA plans take advantage of these lower commercial prices, ranging from 67.4% for a walker (HCPCS code E0143; 95% CI, 66.3%-68.5%) to 75.8% for a complete blood cell count (CPT 85025; 95% CI, 75.0%-76.6%). Traditional Medicare's administratively set rates act as a strong anchor for physician reimbursement in the MA market, although MA plans succeed in negotiating lower prices for other health care services for which TM overpays. Reforms that transition the Medicare program toward some premium support models could substantially affect how physicians and other clinicians are paid.

The Generation of Field Sensitive Interface States in Commercial CMOS Devices.

DTIC Science & Technology

1984-05-31

R. Hevey ATTN: STEWS -TE-AN, A. De La Paz ATTN: Code 6816, R. Lambert ATTN: STEWS -TE-AN, J. Meason ATTN: STEWS -TE-AN, R. Dutchover Naval Surface...Weapons Center ATTN: STEWS -TE-AN, R. Hays ATTN: Code F30 ATTN: STEWS -TE-N, K. Cummings ATTN: Code F31 ATTN: STEWS -TE-N, T. Arellanes ATTN: Code F31, F...Warnock ATTN: STEWS -TE-NT, M. Squires ATTN: Code F31, K. Caudle ATTN: Code WA-52, R. Smith USA Missile Command ATTN: F31, J. Downs ATTN: AMSMI-SF, G

Mandating better buildings: a global review of building codes and prospects for improvement in the United States

DOE PAGES

Sun, Xiaojing; Brown, Marilyn A.; Cox, Matt; ...

2015-03-11

This paper provides a global overview of the design, implementation, and evolution of building energy codes. Reflecting alternative policy goals, building energy codes differ significantly across the United States, the European Union, and China. This review uncovers numerous innovative practices including greenhouse gas emissions caps per square meter of building space, energy performance certificates with retrofit recommendations, and inclusion of renewable energy to achieve “nearly zero-energy buildings”. These innovations motivated an assessment of an aggressive commercial building code applied to all US states, requiring both new construction and buildings with major modifications to comply with the latest version of themore » ASHRAE 90.1 Standards. Using the National Energy Modeling System (NEMS), we estimate that by 2035, such building codes in the United States could reduce energy for space heating, cooling, water heating and lighting in commercial buildings by 16%, 15%, 20% and 5%, respectively. Impacts on different fuels and building types, energy rates and bills as well as pollution emission reductions are also examined.« less

Technical Support Document for Version 3.4.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2007-09-14

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.« less

Country Report on Building Energy Codes in Canada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shui, Bin; Evans, Meredydd

2009-04-06

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America . This reports gives an overview of the development of building energy codes in Canada, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, lighting, and water heating) for commercial and residential buildingsmore » in Canada.« less

A co-designed equalization, modulation, and coding scheme

NASA Technical Reports Server (NTRS)

Peile, Robert E.

1992-01-01

The commercial impact and technical success of Trellis Coded Modulation seems to illustrate that, if Shannon's capacity is going to be neared, the modulation and coding of an analogue signal ought to be viewed as an integrated process. More recent work has focused on going beyond the gains obtained for Average White Gaussian Noise and has tried to combine the coding/modulation with adaptive equalization. The motive is to gain similar advances on less perfect or idealized channels.

Verification of transport equations in a general purpose commercial CFD code.

NASA Astrophysics Data System (ADS)

Melot, Matthieu; Nennemann, Bernd; Deschênes, Claire

2016-11-01

In this paper, the Verification and Validation methodology is presented. This method aims to increase the reliability and the trust that can be placed into complex CFD simulations. The first step of this methodology, the code verification is presented in greater details. The CFD transport equations in steady state, transient and Arbitrary Eulerian Lagrangian (ALE, used for transient moving mesh) formulations in Ansys CFX are verified. It is shown that the expected spatial and temporal order of convergence are achieved for the steady state and the transient formulations. Unfortunately this is not completely the case for the ALE formulation. As for a lot of other commercial and in-house CFD codes, the temporal convergence of the velocity is limited to a first order where a second order would have been expected.

Structural Analysis and Design Software

NASA Technical Reports Server (NTRS)

1997-01-01

Collier Research and Development Corporation received a one-of-a-kind computer code for designing exotic hypersonic aircraft called ST-SIZE in the first ever Langley Research Center software copyright license agreement. Collier transformed the NASA computer code into a commercial software package called HyperSizer, which integrates with other Finite Element Modeling and Finite Analysis private-sector structural analysis program. ST-SIZE was chiefly conceived as a means to improve and speed the structural design of a future aerospace plane for Langley Hypersonic Vehicles Office. Including the NASA computer code into HyperSizer has enabled the company to also apply the software to applications other than aerospace, including improved design and construction for offices, marine structures, cargo containers, commercial and military aircraft, rail cars, and a host of everyday consumer products.

Commercial Motor Vehicle (CMV) Driver Restart Study: Final Report

DOT National Transportation Integrated Search

2017-03-01

A congressionally-mandated naturalistic study was conducted to evaluate the operational, safety, fatigue, and health impacts of the restart provisions in Sections 395.3(c) and 395.3(d) of Title 49, Code of Federal Regulations. A total of 235 commerci...

Agricultural Spraying

NASA Technical Reports Server (NTRS)

1986-01-01

AGDISP, a computer code written for Langley by Continuum Dynamics, Inc., aids crop dusting airplanes in targeting pesticides. The code is commercially available and can be run on a personal computer by an inexperienced operator. Called SWA+H, it is used by the Forest Service, FAA, DuPont, etc. DuPont uses the code to "test" equipment on the computer using a laser system to measure particle characteristics of various spray compounds.

Monitoring compliance with the International Code of Marketing of Breastmilk Substitutes in west Africa: multisite cross sectional survey in Togo and Burkina Faso

PubMed Central

Aguayo, Victor M; Ross, Jay S; Kanon, Souleyman; Ouedraogo, Andre N

2003-01-01

Objectives To monitor compliance with the International Code of Marketing of Breastmilk Substitutes in health systems, sales outlets, distribution points, and the news media in Togo and Burkina Faso, west Africa. Design Multisite cross sectional survey. Participants Staff at 43 health facilities and 66 sales outlets and distribution points, 186 health providers, and 105 mothers of infants aged ⩽5 months in 16 cities. Results Six (14%) health facilities had received donations of breast milk substitutes. All donations were being given to mothers free of charge. Health providers in five (12%) health facilities had received free samples of breast milk substitutes for purposes other than professional research or evaluation. Health professionals in five (12%) health facilities had received promotional gifts from manufacturers. Promotional materials of commercial breast milk substitutes were found in seven (16%) health facilities. Special displays to market commercial breast milk substitutes were found in 29 (44%) sales and distribution points. Forty commercial breast milk substitutes violated the labelling standards of the code: 21 were manufactured by Danone, 11 by Nestlé, and eight by other national and international manufacturers. Most (148, 90%) health providers had never heard of the code, and 66 mothers (63%) had never received any counselling on breast feeding by their health providers. Conclusion In west Africa manufacturers are violating the code of marketing of breast milk substitutes. Comparable levels of code violations are observed with (Burkina Faso) or without (Togo) regulating legislation. Legislation must be accompanied by effective information, training, and monitoring systems to ensure that healthcare providers and manufacturers comply with evidence based practice and the code. What is already known on this topicAll member states of the World Health Assembly have reaffirmed their support for the International Code of Marketing of Breastmilk SubstitutesViolations by manufacturers of breast milk substitutes have been reported in industrialised and developing countriesWhat this study addsManufacturers of breast milk substitutes are violating the code in Togo and Burkina FasoThe levels of code violations are similar in a country with (Burkina Faso) and one without (Togo) legislation on the marketing of breast milk substitutesLegislation must be accompanied by effective information, training, and monitoring systems to ensure compliance with the code PMID:12531842

48 CFR 204.7202-1 - CAGE codes.

Code of Federal Regulations, 2014 CFR

2014-10-01

... issued by DLA Logistics Information Service. (Their address is: Customer Service, Federal Center, 74... Logistics Information Service assigns or records and maintains CAGE codes to identify commercial and... Volume 7 of DoD 4100.39-M, Federal Logistics Information System (FLIS) Procedures Manual, prescribe use...

48 CFR 204.7202-1 - CAGE codes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... issued by DLA Logistics Information Service. (Their address is: Customer Service, Federal Center, 74... Logistics Information Service assigns or records and maintains CAGE codes to identify commercial and... Volume 7 of DoD 4100.39-M, Federal Logistics Information System (FLIS) Procedures Manual, prescribe use...

48 CFR 204.7202-1 - CAGE codes.

Code of Federal Regulations, 2013 CFR

2013-10-01

... issued by DLA Logistics Information Service. (Their address is: Customer Service, Federal Center, 74... Logistics Information Service assigns or records and maintains CAGE codes to identify commercial and... Volume 7 of DoD 4100.39-M, Federal Logistics Information System (FLIS) Procedures Manual, prescribe use...

48 CFR 204.7202-1 - CAGE codes.

Code of Federal Regulations, 2012 CFR

2012-10-01

... issued by DLA Logistics Information Service. (Their address is: Customer Service, Federal Center, 74... Logistics Information Service assigns or records and maintains CAGE codes to identify commercial and... Volume 7 of DoD 4100.39-M, Federal Logistics Information System (FLIS) Procedures Manual, prescribe use...

50 CFR Table 17 to Part 679 - Process Codes for Use With State of Alaska Commercial Operator's Annual Report (COAR)

Code of Federal Regulations, 2010 CFR

2010-10-01

... CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OF THE EXCLUSIVE ECONOMIC ZONE OFF ALASKA Pt. 679, Table 17 Table 17 to Part 679—Process Codes for...

PREFERENCE FOR FLUENT VERSUS DISFLUENT WORK SCHEDULES

PubMed Central

Fienup, Daniel M; Ahlers, Ashley A; Pace, Gary

2011-01-01

Two studies were conducted that examined the preference of a student diagnosed with a brain injury. In Study 1, a preference assessment was followed by a three-choice concurrent-operants reinforcer assessment. Two choices resulted in access to preferred activities for completing work, and a third choice resulted in access to nothing (i.e., no activity). Unpredictably, the participant consistently chose the no-activity option. Study 2 examined why this student preferred work associated with no activity over preferred activities. Through a variety of concurrent-operants procedures, it was determined that she preferred fluent work followed by reinforcers rather than work that was broken up by access to preferred activities. Implications for research on preference are discussed. PMID:22219534

Case Studies Illustrating Focal Alzheimer's, Fluent Aphasia, Late-Onset Memory Loss, and Rapid Dementia.

PubMed

Camsari, Gamze Balci; Murray, Melissa E; Graff-Radford, Neill R

2016-08-01

Many dementia subtypes have more shared signs and symptoms than defining ones. We review 8 cases with 4 overlapping syndromes and demonstrate how to distinguish the cases. These include focal cortical presentations of Alzheimer's disease (AD; posterior cortical atrophy and corticobasal syndrome [CBS]), fluent aphasia (semantic dementia and logopenic aphasia), late-onset slowly progressive dementia (hippocampal sclerosis and limbic predominant AD) and rapidly progressive dementia (Creutzfeldt-Jakob disease and limbic encephalitis). Recognizing the different syndromes can help the clinician to improve their diagnostic skills, leading to improved patient outcomes by early and accurate diagnosis, prompt treatment, and appropriate counseling and guidance. Copyright © 2016 Elsevier Inc. All rights reserved.

Beyond stuttering: Speech disfluencies in normally fluent French-speaking children at age 4.

PubMed

Leclercq, Anne-Lise; Suaire, Pauline; Moyse, Astrid

2018-01-01

The aim of this study was to establish normative data on the speech disfluencies of normally fluent French-speaking children at age 4, an age at which stuttering has begun in 95% of children who stutter (Yairi & Ambrose, 2013). Fifty monolingual French-speaking children who do not stutter participated in the study. Analyses of a conversational speech sample comprising 250-550 words revealed an average of 10% total disfluencies, 2% stuttering-like disfluencies and around 8% non-stuttered disfluencies. Possible explanations for these high speech disfluency frequencies are discussed, including explanations linked to French in particular. The results shed light on the importance of normative data specific to each language.

Performance of a New Speech Translation Device in Translating Verbal Recommendations of Medication Action Plans for Patients with Diabetes

PubMed Central

Soller, R. William; Chan, Philip; Higa, Amy

2012-01-01

Background Language barriers are significant hurdles for chronic disease patients in achieving self-management goals of therapy, particularly in settings where practitioners have limited nonprimary language skills, and in-person translators may not always be available. S-MINDS© (Speaking Multilingual Interactive Natural Dialog System), a concept-based speech translation approach developed by Fluential Inc., can be applied to bridge the technologic gaps that limit the complexity and length of utterances that can be recognized and translated by devices and has the potential to broaden access to translation services in the clinical settings. Methods The prototype translation system was evaluated prospectively for accuracy and patient satisfaction in underserved Spanish-speaking patients with diabetes and limited English proficiency and was compared with other commercial systems for robustness against degradation of translation due to ambient noise and speech patterns. Results Accuracy related to translating the English–Spanish–English communication string from practitioner to device to patient to device to practitioner was high (97–100%). Patient satisfaction was high (means of 4.7–4.9 over four domains on a 5-point Likert scale). The device outperformed three other commercial speech translation systems in terms of accuracy during fast speech utterances, under quiet and noisy fluent speech conditions, and when challenged with various speech disfluencies (i.e., fillers, false starts, stutters, repairs, and long pauses). Conclusions A concept-based English–Spanish speech translation system has been successfully developed in prototype form that can accept long utterances (up to 20 words) with limited to no degradation in accuracy. The functionality of the system is superior to leading commercial speech translation systems. PMID:22920821

Sociological and Communication-Theoretical Perspectives on the Commercialization of the Sciences

ERIC Educational Resources Information Center

Leydesdorff, Loet

2013-01-01

Both self-organization and organization are important for the further development of the sciences: the two dynamics condition and enable each other. Commercial and public considerations can interact and "interpenetrate" in historical organization; different codes of communication are then "recombined". However,…

Commercial Refrigeration Technology. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

The program guide for commercial refrigeration technology courses in Florida identifies primary considerations for the organization, operation, and evaluation of a vocational education program. Following an occupational description for the job title for refrigeration mechanic, and its Dictionary of Occupational Titles code, are six sections…

Commercial Demand Module - NEMS Documentation

EIA Publications

2017-01-01

Documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Commercial Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components.

Transcranial direct current stimulation improves naming reaction time in fluent aphasia: a double-blind, sham-controlled study.

PubMed

Fridriksson, Julius; Richardson, Jessica D; Baker, Julie M; Rorden, Chris

2011-03-01

Previous evidence suggests that anodal transcranial direct current stimulation (A-tDCS) applied to the left hemisphere can improve aphasic participants' ability to name common objects. The current study further examined this issue in a more tightly controlled experiment in participants with fluent aphasia. We examined the effect of A-tDCS on reaction time during overt picture naming in 8 chronic stroke participants. Anode electrode placement targeted perilesional brain regions that showed the greatest activation on a pretreatment functional MRI scan administered during overt picture naming with the reference cathode electrode placed on the contralateral forehead. A-tDCS (1 mA; 20-minute) was compared with sham tDCS (S-tDCS) in a crossover design. Participants received 10 sessions of computerized anomia treatment; 5 sessions included A-tDCS and 5 included S-tDCS. Coupling A-tDCS with behavioral language treatment reduced reaction time during naming of trained items immediately posttreatment (Z=1.96, P=0.025) and at subsequent testing 3 weeks later (Z=2.52, P=0.006). A-tDCS administered during language treatment decreased processing time during picture naming by fluent aphasic participants. Additional studies combining A-tDCS, an inexpensive method with no reported serious side effects, with behavioral language therapy are recommended.

Auditory evoked fields to vocalization during passive listening and active generation in adults who stutter.

PubMed

Beal, Deryk S; Cheyne, Douglas O; Gracco, Vincent L; Quraan, Maher A; Taylor, Margot J; De Nil, Luc F

2010-10-01

We used magnetoencephalography to investigate auditory evoked responses to speech vocalizations and non-speech tones in adults who do and do not stutter. Neuromagnetic field patterns were recorded as participants listened to a 1 kHz tone, playback of their own productions of the vowel /i/ and vowel-initial words, and actively generated the vowel /i/ and vowel-initial words. Activation of the auditory cortex at approximately 50 and 100 ms was observed during all tasks. A reduction in the peak amplitudes of the M50 and M100 components was observed during the active generation versus passive listening tasks dependent on the stimuli. Adults who stutter did not differ in the amount of speech-induced auditory suppression relative to fluent speakers. Adults who stutter had shorter M100 latencies for the actively generated speaking tasks in the right hemisphere relative to the left hemisphere but the fluent speakers showed similar latencies across hemispheres. During passive listening tasks, adults who stutter had longer M50 and M100 latencies than fluent speakers. The results suggest that there are timing, rather than amplitude, differences in auditory processing during speech in adults who stutter and are discussed in relation to hypotheses of auditory-motor integration breakdown in stuttering. Copyright 2010 Elsevier Inc. All rights reserved.

A Comparison of Coverbal Gesture Use in Oral Discourse Among Speakers With Fluent and Nonfluent Aphasia

PubMed Central

Law, Sam-Po; Chak, Gigi Wan-Chi

2017-01-01

Purpose Coverbal gesture use, which is affected by the presence and degree of aphasia, can be culturally specific. The purpose of this study was to compare gesture use among Cantonese-speaking individuals: 23 neurologically healthy speakers, 23 speakers with fluent aphasia, and 21 speakers with nonfluent aphasia. Method Multimedia data of discourse samples from these speakers were extracted from the Cantonese AphasiaBank. Gestures were independently annotated on their forms and functions to determine how gesturing rate and distribution of gestures differed across speaker groups. A multiple regression was conducted to determine the most predictive variable(s) for gesture-to-word ratio. Results Although speakers with nonfluent aphasia gestured most frequently, the rate of gesture use in counterparts with fluent aphasia did not differ significantly from controls. Different patterns of gesture functions in the 3 speaker groups revealed that gesture plays a minor role in lexical retrieval whereas its role in enhancing communication dominates among the speakers with aphasia. The percentages of complete sentences and dysfluency strongly predicted the gesturing rate in aphasia. Conclusions The current results supported the sketch model of language–gesture association. The relationship between gesture production and linguistic abilities and clinical implications for gesture-based language intervention for speakers with aphasia are also discussed. PMID:28609510

Jobs, sex, love and lifestyle: when nonstutterers assume the roles of stutterers.

PubMed

Zhang, Jianliang; Saltuklaroglu, Tim; Hough, Monica; Kalinowski, Joseph

2009-01-01

This study assessed the impact of stuttering via a questionnaire in which fluent individuals were asked to assume the mindset of persons who stutter (PWS) in various life aspects, including vocation, romance, daily activities, friends/social life, family and general lifestyle. The perceived impact of stuttering through the mind's eyes of nonstutterers is supposed to reflect respondents' abilities to impart 'theory of mind' in addressing social penalties related to stuttering. Ninety-one university students answered a questionnaire containing 56 statements on a 7-point Likert scale. Forty-four participants (mean age = 20.4, SD = 4.4) were randomly selected to assume a stuttering identity and 47 respondents (mean age = 20.5, SD = 3.1) to assume their normally fluent identity. Significant differences between groups were found in more than two thirds of items regarding employment, romance, and daily activities, and in fewer than half of items regarding family, friend/social life, and general life style (p <0.001). The social penalties associated with stuttering appear to be apparent to fluent individuals, especially in areas of vocation, romance, and daily activities, suggesting that nonstuttering individuals, when assuming the role of PWS, are capable of at least temporarily feeling the negative impact of stuttering. Copyright 2008 S. Karger AG, Basel.

Phonological neighborhood and word frequency effects in the stuttered disfluencies of children who stutter.

PubMed

Anderson, Julie D

2007-02-01

The purpose of this study was to examine (a) the role of neighborhood density (number of words that are phonologically similar to a target word) and frequency variables on the stuttering-like disfluencies of preschool children who stutter, and (b) whether these variables have an effect on the type of stuttering-like disfluency produced. A 500+ word speech sample was obtained from each participant (N = 15). Each stuttered word was randomly paired with the firstly produced word that closely matched it in grammatical class, familiarity, and number of syllables/phonemes. Frequency, neighborhood density, and neighborhood frequency values were obtained for the stuttered and fluent words from an online database. Findings revealed that stuttered words were lower in frequency and neighborhood frequency than fluent words. Words containing part-word repetitions and sound prolongations were also lower in frequency and/or neighborhood frequency than fluent words, but these frequency variables did not have an effect on single-syllable word repetitions. Neighborhood density failed to influence the susceptibility of words to stuttering, as well as the type of stuttering-like disfluency produced. In general, findings suggest that neighborhood and frequency variables not only influence the fluency with which words are produced in speech, but also have an impact on the type of stuttering-like disfluency produced.

A Comparison of Coverbal Gesture Use in Oral Discourse Among Speakers With Fluent and Nonfluent Aphasia.

PubMed

Kong, Anthony Pak-Hin; Law, Sam-Po; Chak, Gigi Wan-Chi

2017-07-12

Coverbal gesture use, which is affected by the presence and degree of aphasia, can be culturally specific. The purpose of this study was to compare gesture use among Cantonese-speaking individuals: 23 neurologically healthy speakers, 23 speakers with fluent aphasia, and 21 speakers with nonfluent aphasia. Multimedia data of discourse samples from these speakers were extracted from the Cantonese AphasiaBank. Gestures were independently annotated on their forms and functions to determine how gesturing rate and distribution of gestures differed across speaker groups. A multiple regression was conducted to determine the most predictive variable(s) for gesture-to-word ratio. Although speakers with nonfluent aphasia gestured most frequently, the rate of gesture use in counterparts with fluent aphasia did not differ significantly from controls. Different patterns of gesture functions in the 3 speaker groups revealed that gesture plays a minor role in lexical retrieval whereas its role in enhancing communication dominates among the speakers with aphasia. The percentages of complete sentences and dysfluency strongly predicted the gesturing rate in aphasia. The current results supported the sketch model of language-gesture association. The relationship between gesture production and linguistic abilities and clinical implications for gesture-based language intervention for speakers with aphasia are also discussed.

Equity Conscious Instruction in Problem-based Multilingual Science Classrooms

NASA Astrophysics Data System (ADS)

Wright, Elizabeth

This dissertation examines the instructional and relational moves implemented by an equity-conscious teacher in service of supporting discursive participation among her English Learners specifically in a problem-based science classroom. The research included also examines the evolution of discursive participation among English Learners as well as the nature of collaboration among English Learners and their English Fluent peers. Initial findings suggest that there were productive, unproductive, and problematic responses to the teacher's caring approach. Students saw the teacher as approachable and accessible which resulted in students seeking the teacher out, which in turn meant that the teacher was able to scaffold instruction for her students. Students recognized and appreciated teacher strategies, but did not generally take up or adopt her instructional supports when working with their peers. English Fluent students shielded English Learners from more rigorous participation in an effort to prevent them from feeling uncomfortable. Furthermore, English Learners and their English Fluent peers defined "help" in the context of group work differently. The implications for this work include further addressing the ways in which teachers support and scaffold science instruction, thinking more critically about the ways in which teachers are explicit in modeling instructional strategies, and working with students to better understand the implications of differences in the ways that they define help and collaborate.

10 CFR 434.101 - Scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Scope. 434.101 Section 434.101 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL... to new Federal multi-family high rise residential buildings and new Federal commercial buildings, for...

Technical Support Document for Version 3.9.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2011-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC are no longer included, but those sections remain in this document for reference purposes.« less

Technical Support Document for Version 3.9.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2012-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC and version 3.9.0 support for 2000 and 2001 IECC are no longer included, but those sections remain in this document for reference purposes.« less

Predicting Attack-Prone Components with Source Code Static Analyzers

DTIC Science & Technology

2009-05-01

models to determine if additional metrics are required to increase the accuracy of the model: non-security SCSA warnings, code churn and size, the count...code churn and size, the count of faults found manually during development, and the measure of coupling between components. The dependent variable...is the count of vulnerabilities reported by testing and those found in the field. We evaluated our model on three commercial telecommunications

Model-Driven Engineering: Automatic Code Generation and Beyond

DTIC Science & Technology

2015-03-01

and Weblogic as well as cloud environments such as Mi- crosoft Azure and Amazon Web Services®. Finally, while the generated code has dependencies on...code generation in the context of the full system lifecycle from development to sustainment. Acquisition programs in govern- ment or large commercial...Acquirers are concerned with the full system lifecycle, and they need confidence that the development methods will enable the system to meet the functional

Phonological complexity in school-aged children who stutter and exhibit a language disorder.

PubMed

Wolk, Lesley; LaSalle, Lisa R

2015-03-01

The Index of Phonological Complexity and the Word Complexity Measure are two measures of the phonological complexity of a word. Other phonological measures such as phonological neighborhood density have been used to compare stuttered versus fluent words. It appears that in preschoolers who stutter, the length and complexity of the utterance is more influential than the phonetic features of the stuttered word. The present hypothesis was that in school-age children who stutter, stuttered words would be more phonologically complex than fluent words, when the length and complexity of the utterance containing them is comparable. School-age speakers who stutter were hypothesized to differ from those with a concomitant language disorder. Sixteen speakers, six females and ten males (M age=12;3; Range=7;7 to 19;5) available from an online database, were divided into eight who had a concomitant language disorder (S+LD) and eight age- and sex-matched speakers who did not (S-Only). When all stuttered content words were identified, S+LD speakers produced more repetitions, and S-Only speakers produced more inaudible sound prolongations. When stuttered content words were matched to fluent content words and when talker groups were combined, stuttered words were significantly (p≤0.01) higher in both the Index of Phonological Complexity and the Word Complexity Measure and lower in density ("sparser") than fluent words. Results corroborate those of previous researchers. Future research directions are suggested, such as cross-sectional designs to evaluate developmental patterns of phonological complexity and stuttering plus language disordered connections. The reader will be able to: (a) Define and describe phonological complexity; (b) Define phonological neighborhood density and summarize the literature on the topic; (c) Describe the Index of Phonological Complexity (IPC) for a given word; (d) Describe the Word Complexity Measure (WCM) for a given word; (e) Summarize two findings from the current study and describe how each relates to studies of phonological complexity and fluency disorders. Copyright © 2014 Elsevier Inc. All rights reserved.

The experiences of living with a sibling who stutters: a preliminary study.

PubMed

Beilby, Janet M; Byrnes, Michelle L; Young, Kate N

2012-06-01

Stuttering impacts on the child in a variety of ways, notably in terms of communicative impairment and psychosocial impact. In addition, the stuttering disorder has a holistic impact, affecting those with whom the child who stutters lives. Within the family constellation, the closest person to the individual who stutters is often their sibling. This study investigated the experiences of fluent siblings of children who stutter to examine the impact that stuttering may have on their lives. A mixed methods research design incorporated qualitative semi-structured interviews and quantitative questionnaires. The results of the qualitative investigation revealed four aspects of children's lives that were affected by having a sibling who stuttered: the relationship between siblings, the impact on the fluent sibling, the impact on the parent relationship with both children, and the impact on the sibling's relationship with others. Findings revealed that siblings of children who stutter exhibited strongly negative emotions, and differing levels of responsibility associated with their involvement in the actual stuttering management programme. Furthermore, for the fluent sibling, secondary to having a brother or sister who stuttered, communication with and attention from their parents was variable. The results of the quantitative component of the study revealed children who stutter and their siblings demonstrated significantly greater closeness, and concurrently, increased conflict and status disparity than did the control fluent sibling dyads. The parents of the experimental sibling dyads also demonstrated significantly greater partiality towards a child, namely the child who stuttered, than did the parents of the control sibling dyads. The reader will be able to: (1) identify the themes associated with having a sibling who stutters; (2) identify how the quality of the sibling relationship differs between sibling dyads that do and do not consist of a sibling who stutters; and (3) discuss the clinical implications of the results with regards to working with children who stutter and their families. Crown Copyright © 2012. Published by Elsevier Inc. All rights reserved.

How to engage the right brain hemisphere in aphasics without even singing: evidence for two paths of speech recovery

PubMed Central

Stahl, Benjamin; Henseler, Ilona; Turner, Robert; Geyer, Stefan; Kotz, Sonja A.

2012-01-01

There is an ongoing debate as to whether singing helps left-hemispheric stroke patients recover from non-fluent aphasia through stimulation of the right hemisphere. According to recent work, it may not be singing itself that aids speech production in non-fluent aphasic patients, but rhythm and lyric type. However, the long-term effects of melody and rhythm on speech recovery are largely unknown. In the current experiment, we tested 15 patients with chronic non-fluent aphasia who underwent either singing therapy, rhythmic therapy, or standard speech therapy. The experiment controlled for phonatory quality, vocal frequency variability, pitch accuracy, syllable duration, phonetic complexity and other influences, such as the acoustic setting and learning effects induced by the testing itself. The results provide the first evidence that singing and rhythmic speech may be similarly effective in the treatment of non-fluent aphasia. This finding may challenge the view that singing causes a transfer of language function from the left to the right hemisphere. Instead, both singing and rhythmic therapy patients made good progress in the production of common, formulaic phrases—known to be supported by right corticostriatal brain areas. This progress occurred at an early stage of both therapies and was stable over time. Conversely, patients receiving standard therapy made less progress in the production of formulaic phrases. They did, however, improve their production of non-formulaic speech, in contrast to singing and rhythmic therapy patients, who did not. In light of these results, it may be worth considering the combined use of standard therapy and the training of formulaic phrases, whether sung or rhythmically spoken. Standard therapy may engage, in particular, left perilesional brain regions, while training of formulaic phrases may open new ways of tapping into right-hemisphere language resources—even without singing. PMID:23450277

White matter damage in primary progressive aphasias: a diffusion tensor tractography study.

PubMed

Galantucci, Sebastiano; Tartaglia, Maria Carmela; Wilson, Stephen M; Henry, Maya L; Filippi, Massimo; Agosta, Federica; Dronkers, Nina F; Henry, Roland G; Ogar, Jennifer M; Miller, Bruce L; Gorno-Tempini, Maria Luisa

2011-10-01

Primary progressive aphasia is a clinical syndrome that encompasses three major phenotypes: non-fluent/agrammatic, semantic and logopenic. These clinical entities have been associated with characteristic patterns of focal grey matter atrophy in left posterior frontoinsular, anterior temporal and left temporoparietal regions, respectively. Recently, network-level dysfunction has been hypothesized but research to date has focused largely on studying grey matter damage. The aim of this study was to assess the integrity of white matter tracts in the different primary progressive aphasia subtypes. We used diffusion tensor imaging in 48 individuals: nine non-fluent, nine semantic, nine logopenic and 21 age-matched controls. Probabilistic tractography was used to identify bilateral inferior longitudinal (anterior, middle, posterior) and uncinate fasciculi (referred to as the ventral pathway); and the superior longitudinal fasciculus segmented into its frontosupramarginal, frontoangular, frontotemporal and temporoparietal components, (referred to as the dorsal pathway). We compared the tracts' mean fractional anisotropy, axial, radial and mean diffusivities for each tract in the different diagnostic categories. The most prominent white matter changes were found in the dorsal pathways in non-fluent patients, in the two ventral pathways and the temporal components of the dorsal pathways in semantic variant, and in the temporoparietal component of the dorsal bundles in logopenic patients. Each of the primary progressive aphasia variants showed different patterns of diffusion tensor metrics alterations: non-fluent patients showed the greatest changes in fractional anisotropy and radial and mean diffusivities; semantic variant patients had severe changes in all metrics; and logopenic patients had the least white matter damage, mainly involving diffusivity, with fractional anisotropy altered only in the temporoparietal component of the dorsal pathway. This study demonstrates that both careful dissection of the main language tracts and consideration of all diffusion tensor metrics are necessary to characterize the white matter changes that occur in the variants of primary progressive aphasia. These results highlight the potential value of diffusion tensor imaging as a new tool in the multimodal diagnostic evaluation of primary progressive aphasia.

Prediction of Ablation Rates from Solid Surfaces Exposed to High Temperature Gas Flow

NASA Technical Reports Server (NTRS)

Akyuzlu, Kazim M.; Coote, David

2013-01-01

A mathematical model and a solution algorithm is developed to study the physics of high temperature heat transfer and material ablation and identify the problems associated with the flow of hydrogen gas at very high temperatures and velocities through pipes and various components of Nuclear Thermal Rocket (NTR) motors. Ablation and melting can be experienced when the inner solid surface of the cooling channels and the diverging-converging nozzle of a Nuclear Thermal Rocket (NTR) motor is exposed to hydrogen gas flow at temperatures around 2500 degrees Kelvin and pressures around 3.4 MPa. In the experiments conducted on typical NTR motors developed in 1960s, degradation of the cooling channel material (cracking in the nuclear fuel element cladding) and in some instances melting of the core was observed. This paper presents the results of a preliminary study based on two types of physics based mathematical models that were developed to simulate the thermal-hydrodynamic conditions that lead to ablation of the solid surface of a stainless steel pipe exposed to high temperature hydrogen gas near sonic velocities. One of the proposed models is one-dimensional and assumes the gas flow to be unsteady, compressible and viscous. An in-house computer code was developed to solve the conservations equations of this model using a second-order accurate finite-difference technique. The second model assumes the flow to be three-dimensional, unsteady, compressible and viscous. A commercial CFD code (Fluent) was used to solve the later model equations. Both models assume the thermodynamic and transport properties of the hydrogen gas to be temperature dependent. In the solution algorithm developed for this study, the unsteady temperature of the pipe is determined from the heat equation for the solid. The solid-gas interface temperature is determined from an energy balance at the interface which includes heat transfer from or to the interface by conduction, convection, radiation, and ablation. Two different ablation models are proposed to determine the heat loss from the solid surface due to the ablation of the solid material. Both of them are physics based. Various numerical simulations were carried out using both models to predict the temperature distribution in the solid and in the gas flow, and then predict the ablation rates at a typical NTR motor hydrogen gas temperature and pressure. Solid mass loss rate per foot of a pipe was also calculated from these predictions. The results are presented for fully developed turbulent flow conditions in a sample SS pipe with a 6 inch diameter.

Bar Code Labels

NASA Technical Reports Server (NTRS)

1988-01-01

American Bar Codes, Inc. developed special bar code labels for inventory control of space shuttle parts and other space system components. ABC labels are made in a company-developed anodizing aluminum process and consecutively marketed with bar code symbology and human readable numbers. They offer extreme abrasion resistance and indefinite resistance to ultraviolet radiation, capable of withstanding 700 degree temperatures without deterioration and up to 1400 degrees with special designs. They offer high resistance to salt spray, cleaning fluids and mild acids. ABC is now producing these bar code labels commercially or industrial customers who also need labels to resist harsh environments.

GRABGAM Analysis of Ultra-Low-Level HPGe Gamma Spectra

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winn, W.G.

The GRABGAM code has been used successfully for ultra-low level HPGe gamma spectrometry analysis since its development in 1985 at Savannah River Technology Center (SRTC). Although numerous gamma analysis codes existed at that time, reviews of institutional and commercial codes indicated that none addressed all features that were desired by SRTC. Furthermore, it was recognized that development of an in-house code would better facilitate future evolution of the code to address SRTC needs based on experience with low-level spectra. GRABGAM derives its name from Gamma Ray Analysis BASIC Generated At MCA/PC.

76 FR 31393 - Federal Acquisition Regulation; Federal Acquisition Circular 2005-52; Introduction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... 2010-017 Robinson. Ethics Programs. VI Technical Amendments... SUPPLEMENTARY INFORMATION: Summaries for... technology that is a commercial item. Item V--Oversight of Contractor Ethics Programs (FAR Case 2010-017... Code of Business Ethics and Conduct. Contracting officers may ask to see a contractor's code of ethics...

77 FR 59339 - Acquisition of Commercial Items

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-27

... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System 48 CFR Part 212 Acquisition of Commercial Items CFR Correction 212.504 [Corrected] In Title 48 of the Code of Federal Regulations, Chapter 2 (Parts 201--299), revised as of October 1, 2011, on page 73, in section 212.504, paragraph (a) is...

A cross-sectional examination of marketing of electronic cigarettes on Twitter

PubMed Central

Huang, Jidong; Kornfield, Rachel; Szczypka, Glen; Emery, Sherry L

2014-01-01

Background Rapid increases in marketing of e-cigarettes coincide with growth in e-cigarette use in recent years; however, little is known about how e-cigarettes are marketed on social media platforms. Methods Keywords were used to collect tweets related to e-cigarettes from the Twitter Firehose between 1 May 2012 and 30 June 2012. Tweets were coded for smoking cessation mentions, as well as health and safety mentions, and were classified as commercial or non-commercial (‘organic’) tweets using a combination of Naïve Bayes machine learning methods, keyword algorithms and human coding. Metadata associated with each tweet were used to examine the characteristics of accounts tweeting about e-cigarettes. Results 73 672 tweets related to e-cigarettes were captured in the study period, 90% of which were classified as commercial tweets. Accounts tweeting commercial e-cigarette content were associated with lower Klout scores, a measure of influence. Commercial tweeting was largely driven by a small group of highly active accounts, and 94% of commercial tweets included links to websites, many of which sell or promote e-cigarettes. Approximately 10% of commercial and organic tweets mentioned smoking cessation, and 34% of commercial tweets included mentions of prices or discounts for e-cigarettes. Conclusions Twitter appears to be an important marketing platform for e-cigarettes. Tweets related to e-cigarettes were overwhelmingly commercial, and a substantial proportion mentioned smoking cessation. E-cigarette marketing on Twitter may have public health implications. Continued surveillance of e-cigarette marketing on social media platforms is needed. PMID:24935894

Improving building energy efficiency in India: State-level analysis of building energy efficiency policies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Sha; Tan, Qing; Evans, Meredydd

India is expected to add 40 billion m2 of new buildings till 2050. Buildings are responsible for one third of India’s total energy consumption today and building energy use is expected to continue growing driven by rapid income and population growth. The implementation of the Energy Conservation Building Code (ECBC) is one of the measures to improve building energy efficiency. Using the Global Change Assessment Model, this study assesses growth in the buildings sector and impacts of building energy policies in Gujarat, which would help the state adopt ECBC and expand building energy efficiency programs. Without building energy policies, buildingmore » energy use in Gujarat would grow by 15 times in commercial buildings and 4 times in urban residential buildings between 2010 and 2050. ECBC improves energy efficiency in commercial buildings and could reduce building electricity use in Gujarat by 20% in 2050, compared to the no policy scenario. Having energy codes for both commercial and residential buildings could result in additional 10% savings in electricity use. To achieve these intended savings, it is critical to build capacity and institution for robust code implementation.« less

Lexical priming in Alzheimer's disease and aphasia.

PubMed

Arroyo-Anlló, Eva Maria; Beauchamps, Mireille; Ingrand, Pierre; Neau, Jean Philippe; Gil, Roger

2013-01-01

Lexical priming was examined in patients with Alzheimer's disease and in aphasic patients. Control participants were divided into young and elderly [cf. Arroyo-Anlló et al.: Eur J Cogn Psychol 2004;16:535-553]. For lexical priming, a word-stem completion task was used. Normal elderly participants had lexical priming scores that were significantly lower than those of young individuals. Analysis of covariance with age and educational level as covariates showed that the control participants, aphasic and Alzheimer patients did not differ significantly on the lexical priming task. Our results suggest that performance in the lexical priming task diminishes with physiological aging, but is not significantly affected by mild or moderate Alzheimer's disease or by fluent or non-fluent aphasia. Copyright © 2013 S. Karger AG, Basel.

Study of statistical coding for digital TV

NASA Technical Reports Server (NTRS)

Gardenhire, L. W.

1972-01-01

The results are presented for a detailed study to determine a pseudo-optimum statistical code to be installed in a digital TV demonstration test set. Studies of source encoding were undertaken, using redundancy removal techniques in which the picture is reproduced within a preset tolerance. A method of source encoding, which preliminary studies show to be encouraging, is statistical encoding. A pseudo-optimum code was defined and the associated performance of the code was determined. The format was fixed at 525 lines per frame, 30 frames per second, as per commercial standards.

Transmutation Fuel Performance Code Thermal Model Verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gregory K. Miller; Pavel G. Medvedev

2007-09-01

FRAPCON fuel performance code is being modified to be able to model performance of the nuclear fuels of interest to the Global Nuclear Energy Partnership (GNEP). The present report documents the effort for verification of the FRAPCON thermal model. It was found that, with minor modifications, FRAPCON thermal model temperature calculation agrees with that of the commercial software ABAQUS (Version 6.4-4). This report outlines the methodology of the verification, code input, and calculation results.

Experimental and CFD-PBM approach coupled with a simplified dynamic analysis of mass transfer in phenol biodegradation in a three phase system of an aerated two-phase partitioning bioreactor for environmental applications

NASA Astrophysics Data System (ADS)

Moradkhani, Hamed; Anarjan Kouchehbagh, Navideh; Izadkhah, Mir-Shahabeddin

2017-03-01

A three-dimensional transient modeling of a two-phase partitioning bioreactor, combining system hydrodynamics, two simultaneous mass transfer and microorganism growth is modeled using computational fluid dynamics code FLUENT 6.2. The simulation is based on standard "k-ɛ" Reynolds-averaged Navier-Stokes model. Population balance model is implemented in order to describe gas bubble coalescence, breakage and species transport in the reaction medium and to predict oxygen volumetric mass transfer coefficient (kLa). Model results are verified against experimental data and show good agreement as 13 classes of bubble size is taking into account. Flow behavior in different operational conditions is studied. Almost at all impeller speeds and aeration intensities there were acceptable distributions of species caused by proper mixing. The magnitude of dissolved oxygen percentage in aqueous phase has a direct correlation with impeller speed and any increasing of the aeration magnitude leads to faster saturation in shorter periods of time.

Pneumafil casing blower through moving reference frame (MRF) - A CFD simulation

NASA Astrophysics Data System (ADS)

Manivel, R.; Vijayanandh, R.; Babin, T.; Sriram, G.

2018-05-01

In this analysis work, the ring frame of Pneumafil casing blower of the textile mills with a power rating of 5 kW have been simulated using Computational Fluid Dynamics (CFD) code. The CFD analysis of the blower is carried out in Ansys Workbench 16.2 with Fluent using MRF solver settings. The simulation settings and boundary conditions are based on literature study and field data acquired. The main objective of this work is to reduce the energy consumption of the blower. The flow analysis indicated that the power consumption is influenced by the deflector plate orientation and deflector plate strip situated at the outlet casing of the blower. The energy losses occurred in the blower is due to the recirculation zones formed around the deflector plate strip. The deflector plate orientation is changed and optimized to reduce the energy consumption. The proposed optimized model is based on the simulation results which had relatively lesser power consumption than the existing and other cases. The energy losses in the Pneumafil casing blower are reduced through CFD analysis.

A Computational Chemistry Database for Semiconductor Processing

NASA Technical Reports Server (NTRS)

Jaffe, R.; Meyyappan, M.; Arnold, J. O. (Technical Monitor)

1998-01-01

The concept of 'virtual reactor' or 'virtual prototyping' has received much attention recently in the semiconductor industry. Commercial codes to simulate thermal CVD and plasma processes have become available to aid in equipment and process design efforts, The virtual prototyping effort would go nowhere if codes do not come with a reliable database of chemical and physical properties of gases involved in semiconductor processing. Commercial code vendors have no capabilities to generate such a database, rather leave the task to the user of finding whatever is needed. While individual investigations of interesting chemical systems continue at Universities, there has not been any large scale effort to create a database. In this presentation, we outline our efforts in this area. Our effort focuses on the following five areas: 1. Thermal CVD reaction mechanism and rate constants. 2. Thermochemical properties. 3. Transport properties.4. Electron-molecule collision cross sections. and 5. Gas-surface interactions.

Sociological and Communication-Theoretical Perspectives on the Commercialization of the Sciences

NASA Astrophysics Data System (ADS)

Leydesdorff, Loet

2013-10-01

Both self-organization and organization are important for the further development of the sciences: the two dynamics condition and enable each other. Commercial and public considerations can interact and "interpenetrate" in historical organization; different codes of communication are then "recombined". However, self-organization in the symbolically generalized codes of communication can be expected to operate at the global level. The Triple Helix model allows for both a neo-institutional appreciation in terms of historical networks of university-industry-government relations and a neo-evolutionary interpretation in terms of three functions: (1) novelty production, (2) wealth generation, and (3) political control. Using this model, one can appreciate both subdynamics. The mutual information in three dimensions enables us to measure the trade-off between organization and self-organization as a possible synergy. The question of optimization between commercial and public interests in the different sciences can thus be made empirical.

Availability of physical activity-related facilities and neighborhood demographic and socioeconomic characteristics: a national study.

PubMed

Powell, Lisa M; Slater, Sandy; Chaloupka, Frank J; Harper, Deborah

2006-09-01

We examined associations between neighborhood demographic characteristics and the availability of commercial physical activity-related outlets by zip code across the United States. Multivariate analyses were conducted to assess the availability of 4 types of outlets: (1) physical fitness facilities, (2) membership sports and recreation clubs, (3) dance facilities, and (4) public golf courses. Commercial outlet data were linked by zip code to US Census Bureau population and socioeconomic data. Results showed that commercial physical activity-related facilities were less likely to be present in lower-income neighborhoods and in neighborhoods with higher proportions of African American residents, residents with His-panic ethnicity, and residents of other racial minority backgrounds. In addition, these neighborhoods had fewer such facilities available. Lack of availability of facilities that enable and promote physical activity may, in part, underpin the lower levels of activity observed among populations of low socioeconomic status and minority backgrounds.

Effect of jet-mainstream velocity ratio on flow characteristics and heat transfer enhancement of jet on flat plate flow

NASA Astrophysics Data System (ADS)

Puzu, N.; Prasertsan, S.; Nuntadusit, C.

2017-09-01

The aim of this research was to study the effect of jet-mainstream velocity ratio on flow and heat transfer characteristics of jet on flat plate flow. The jet from pipe nozzle with inner diameter of D=14 mm was injected perpendicularly to mainstream on flat plate. The flat plate was blown by mainstream with uniform velocity profile at 10 m/s. The velocity ratio (jet to mainstream velociy) was varied at VR=0.25 and 3.5 by adjusting velocity of jet flow. For heat transfer measurement, a thin foil technique was used to evaluate the heat transfer coefficient by measuring temperature distributions on heat transfer surface with constant heat flux by using infrared camera. Flow characteristics were simulated by using a computational fluid dynamics (CFD) with commercial software ANSYS Fluent (Ver.15.0). The results showed that the enhancement of heat transfer along downstream direction for the case of VR=0.25 was from the effect of jet stream whereas for the case of VR=3.5 was from the effect of mainstream.

CFD simulation of gas and non-Newtonian fluid two-phase flow in anaerobic digesters.

PubMed

Wu, Binxin

2010-07-01

This paper presents an Eulerian multiphase flow model that characterizes gas mixing in anaerobic digesters. In the model development, liquid manure is assumed to be water or a non-Newtonian fluid that is dependent on total solids (TS) concentration. To establish the appropriate models for different TS levels, twelve turbulence models are evaluated by comparing the frictional pressure drops of gas and non-Newtonian fluid two-phase flow in a horizontal pipe obtained from computational fluid dynamics (CFD) with those from a correlation analysis. The commercial CFD software, Fluent12.0, is employed to simulate the multiphase flow in the digesters. The simulation results in a small-sized digester are validated against the experimental data from literature. Comparison of two gas mixing designs in a medium-sized digester demonstrates that mixing intensity is insensitive to the TS in confined gas mixing, whereas there are significant decreases with increases of TS in unconfined gas mixing. Moreover, comparison of three mixing methods indicates that gas mixing is more efficient than mixing by pumped circulation while it is less efficient than mechanical mixing.

2D simulation of active species and ozone production in a multi-tip DC air corona discharge

NASA Astrophysics Data System (ADS)

Meziane, M.; Eichwald, O.; Sarrette, J. P.; Ducasse, O.; Yousfi, M.

2011-11-01

The present paper shows for the first time in the literature a complete 2D simulation of the ozone production in a DC positive multi-tip to plane corona discharge reactor crossed by a dry air flow at atmospheric pressure. The simulation is undertaken until 1 ms and involves tens of successive discharge and post-discharge phases. The air flow is stressed by several monofilament corona discharges generated by a maximum of four anodic tips distributed along the reactor. The nonstationary hydrodynamics model for reactive gas mixture is solved using the commercial FLUENT software. During each discharge phase, thermal and vibrational energies as well as densities of radical and metastable excited species are locally injected as source terms in the gas medium surrounding each tip. The chosen chemical model involves 10 neutral species reacting following 24 reactions. The obtained results allow us to follow the cartography of the temperature and the ozone production inside the corona reactor as a function of the number of high voltage anodic tips.

Evaluation of Liquid Fuel Spray Models for Hybrid RANS/LES and DLES Prediction of Turbulent Reactive Flows

NASA Astrophysics Data System (ADS)

Afshar, Ali

An evaluation of Lagrangian-based, discrete-phase models for multi-component liquid sprays encountered in the combustors of gas turbine engines is considered. In particular, the spray modeling capabilities of the commercial software, ANSYS Fluent, was evaluated. Spray modeling was performed for various cold flow validation cases. These validation cases include a liquid jet in a cross-flow, an airblast atomizer, and a high shear fuel nozzle. Droplet properties including velocity and diameter were investigated and compared with previous experimental and numerical results. Different primary and secondary breakup models were evaluated in this thesis. The secondary breakup models investigated include the Taylor analogy breakup (TAB) model, the wave model, the Kelvin-Helmholtz Rayleigh-Taylor model (KHRT), and the Stochastic secondary droplet (SSD) approach. The modeling of fuel sprays requires a proper treatment for the turbulence. Reynolds-averaged Navier-Stokes (RANS), large eddy simulation (LES), hybrid RANS/LES, and dynamic LES (DLES) were also considered for the turbulent flows involving sprays. The spray and turbulence models were evaluated using the available benchmark experimental data.

Suppression/Reversal of Natural Convection by Exploiting the Temperature/Composition Dependence of Magnetic Susceptibility

NASA Technical Reports Server (NTRS)

Seybert, C. D.; Evans, J. W.; Leslie, F.; Jones, W. K., Jr.

2000-01-01

Natural convection, driven by temperature-or concentration gradients or both, is an inherent phenomenon during solidification of materials on Earth. This convection has practical consequences (e.g effecting macrosegregation) but also renders difficult the scientific examination of diffusive/conductive phenomena during solidification. It is possible to halt, or even reverse, natural convection by exploiting the variation (with temperature, for example) of the susceptibility of a material. If the material is placed in a vertical magnetic field gradient, a buoyancy force of magnetic origin arises and, at a critical field gradient, can balance the normal buoyancy forces to halt convection. At higher field gradients the convection can be reversed. The effect has been demonstrated in experiments at Marshall Space Flight Center where flow was measured by PIV in MnCl2 solution in a superconducting magnet. In auxiliary experiments the field in the magnet and the properties of the solution were measured. Computations of the natural convection, its halting and reversal, using the commercial software FLUENT were in good agreement with the measurements.

What Are Those Checkerboard Things?: How QR Codes Can Enrich Student Projects

ERIC Educational Resources Information Center

Tucker, Al

2011-01-01

Students enrolled in commercial arts program design and publish their school's yearbook. For the 2010-2011 school year, the students applied Quick Response (QR) code technology to include links to events that occurred after the yearbook's print deadline, including graduation. The technology has many applications in the school setting, and the…

48 CFR 52.204-18 - Commercial and Government Entity Code Maintenance.

Code of Federal Regulations, 2014 CFR

2014-10-01

... assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency... NATO Support Agency (NSPA) to entities located outside the United States and its outlying areas that... code on the contract. (c) Contractors located in the United States or its outlying areas that are not...

78 FR 73502 - Multistakeholder Process To Develop Consumer Data Privacy Code of Conduct Concerning Facial...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-06

... Process To Develop Consumer Data Privacy Code of Conduct Concerning Facial Recognition Technology AGENCY... technology. This Notice announces the meetings to be held in February, March, April, May, and June 2014. The... promote trust regarding facial recognition technology in the commercial context.\\4\\ NTIA encourages...

76 FR 32989 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-07

.../Purpose: The loan, guarantee, or grant application is to obtain financing for infrastructure updates... will be located in Burlington, Iowa. The NAICS industry code for this enterprise is: 311812 (commercial..., Assistant Secretary for Employment and Training. [FR Doc. 2011-13937 Filed 6-6-11; 8:45 am] BILLING CODE...

Overview of High-Fidelity Modeling Activities in the Numerical Propulsion System Simulations (NPSS) Project

NASA Technical Reports Server (NTRS)

Veres, Joseph P.

2002-01-01

A high-fidelity simulation of a commercial turbofan engine has been created as part of the Numerical Propulsion System Simulation Project. The high-fidelity computer simulation utilizes computer models that were developed at NASA Glenn Research Center in cooperation with turbofan engine manufacturers. The average-passage (APNASA) Navier-Stokes based viscous flow computer code is used to simulate the 3D flow in the compressors and turbines of the advanced commercial turbofan engine. The 3D National Combustion Code (NCC) is used to simulate the flow and chemistry in the advanced aircraft combustor. The APNASA turbomachinery code and the NCC combustor code exchange boundary conditions at the interface planes at the combustor inlet and exit. This computer simulation technique can evaluate engine performance at steady operating conditions. The 3D flow models provide detailed knowledge of the airflow within the fan and compressor, the high and low pressure turbines, and the flow and chemistry within the combustor. The models simulate the performance of the engine at operating conditions that include sea level takeoff and the altitude cruise condition.

Outdoor Test Facility and Related Facilities | Photovoltaic Research | NREL

Science.gov Websites

advanced or emerging photovoltaic (PV) technologies under simulated, accelerated indoor and outdoor, and evaluate prototype, pre-commercial, and commercial PV modules. One of the major roles of researchers at the OTF is to work with industry to develop uniform and consensus standards and codes for testing PV

78 FR 49202 - Energy Conservation Program for Certain Commercial and Industrial Equipment: Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-13

.... EERE-2013-BT-STD-0030] RIN 1904-AD01 Energy Conservation Program for Certain Commercial and Industrial... efficiency of certain industrial equipment to conserve the energy resources of the Nation. DATES: DOE will... codification in the U.S. Code, establishes the ``Energy Conservation Program for Certain Industrial Equipment...

Commercial Supersonics Technology Project - Status of Airport Noise

NASA Technical Reports Server (NTRS)

Bridges, James

2016-01-01

The Commercial Supersonic Technology Project has been developing databases, computational tools, and system models to prepare for a level 1 milestone, the Low Noise Propulsion Tech Challenge, to be delivered Sept 2016. Steps taken to prepare for the final validation test are given, including system analysis, code validation, and risk reduction testing.

22 CFR 706.34 - What, if any, fees will I be charged?

Code of Federal Regulations, 2013 CFR

2013-04-01

...) or scientific (if the request is from a non-commercial scientific institution) research. (3... free search and reproduction described above, except for commercial use requesters. For example, for a.... Interest will be at the rate prescribed in section 3717 of Title 31 of the United States Code. (2) If you...

Content and Effect of Children's Commercials.

ERIC Educational Resources Information Center

Solomon, Henry; And Others

The 3 studies described in this paper focused on the image of the child in television advertising directed toward children between the ages of 2 and 11. Using an analysis code containing 16 operationally-defined categories, the first study analyzed the behaviors of children depicted in 37 commercials for toys, food, and clothing from Saturday…

Undertreatment of COPD: a retrospective analysis of US managed care and Medicare patients.

PubMed

Make, Barry; Dutro, Michael P; Paulose-Ram, Ryne; Marton, Jenö P; Mapel, Douglas W

2012-01-01

We investigated a large population of patients with chronic obstructive pulmonary disease (COPD) to determine their frequency of medication use and patterns of pharmacotherapy. Medical and pharmacy claims data were retrospectively analyzed from 19 health plans (>7.79 million members) across the US. Eligible patients were aged ≥40 years, continuously enrolled during July 2004 to June 2005, and had at least one inpatient or at least two outpatient claims coded for COPD. As a surrogate for severity of illness, COPD patients were stratified by complexity of illness using predefined International Classification of Diseases, Ninth Revision, Clinical Modification, Current Procedural Terminology, Fourth Edition, and Healthcare Common Procedure Coding System codes. A total of 42,565 patients with commercial insurance and 8507 Medicare patients were identified. Their mean age was 54.7 years and 74.8 years, and 48.7% and 46.9% were male, respectively. In total, 66.3% of commercial patients (n = 28,206) were not prescribed any maintenance COPD pharmacotherapy (59.1% no medication; 7.2% inhaled short-acting β2-agonist only). In the Medicare population, 70.9% (n = 6031) were not prescribed any maintenance COPD pharmacotherapy (66.0% no medication; 4.9% short-acting β2-agonist only). A subset of patients classified as high-complexity were similarly undertreated, with 58.7% (5358/9121) of commercial and 68.8% (1616/2350) of Medicare patients not prescribed maintenance COPD pharmacotherapy. Only 18.0% and 9.8% of diagnosed smokers in the commercial and Medicare cohorts had a claim for a smoking cessation intervention and just 16.6% and 23.5%, respectively, had claims for an influenza vaccination. This study highlights a high degree of undertreatment of COPD in both commercial and Medicare patients, with most patients receiving no maintenance pharmacotherapy or influenza vaccination.

White matter pathways in persistent developmental stuttering: Lessons from tractography.

PubMed

Kronfeld-Duenias, Vered; Civier, Oren; Amir, Ofer; Ezrati-Vinacour, Ruth; Ben-Shachar, Michal

2018-03-01

Fluent speech production relies on the coordinated processing of multiple brain regions. This highlights the role of neural pathways that connect distinct brain regions in producing fluent speech. Here, we aim to investigate the role of the white matter pathways in persistent developmental stuttering (PDS), where speech fluency is disrupted. We use diffusion weighted imaging and tractography to compare the white matter properties between adults who do and do not stutter. We compare the diffusion properties along 18 major cerebral white matter pathways. We complement the analysis with an overview of the methodology and a roadmap of the pathways implicated in PDS according to the existing literature. We report differences in the microstructural properties of the anterior callosum, the right inferior longitudinal fasciculus and the right cingulum in people who stutter compared with fluent controls. Persistent developmental stuttering is consistently associated with differences in bilateral distributed networks. We review evidence showing that PDS involves differences in bilateral dorsal fronto-temporal and fronto-parietal pathways, in callosal pathways, in several motor pathways and in basal ganglia connections. This entails an important role for long range white matter pathways in this disorder. Using a wide-lens analysis, we demonstrate differences in additional, right hemispheric pathways, which go beyond the replicable findings in the literature. This suggests that the affected circuits may extend beyond the known language and motor pathways. Copyright © 2017 Elsevier Inc. All rights reserved.

Phonological Neighborhood and Word Frequency Effects in the Stuttered Disfluencies of Children Who Stutter

PubMed Central

Anderson, Julie D.

2008-01-01

Purpose The purpose of this study was to examine (a) the role of neighborhood density (number of words that are phonologically similar to a target word) and frequency variables on the stuttering-like disfluencies of preschool children who stutter, and (b) whether these variables have an effect on the type of stuttering-like disfluency produced. Method A 500+ word speech sample was obtained from each participant (N = 15). Each stuttered word was randomly paired with the firstly produced word that closely matched it in grammatical class, familiarity, and number of syllables/phonemes. Frequency, neighborhood density, and neighborhood frequency values were obtained for the stuttered and fluent words from an online database. Results Findings revealed that stuttered words were lower in frequency and neighborhood frequency than fluent words. Words containing part-word repetitions and sound prolongations were also lower in frequency and/or neighborhood frequency than fluent words, but these frequency variables did not have an effect on single-syllable word repetitions. Neighborhood density failed to influence the susceptibility of words to stuttering, as well as the type of stuttering-like disfluency produced. Conclusions In general, findings suggest that neighborhood and frequency variables not only influence the fluency with which words are produced in speech, but also have an impact on the type of stuttering-like disfluency produced. PMID:17344561

Final Progress Report: Internship at Los Alamos National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunham, Ryan Q.

2012-08-10

Originally I was tasked fluidized bed modeling, however, I changed projects. While still working with ANSYS Fluent, I performed a study of particle tracks in glove boxes. This is useful from a Health-Physics perspective, dealing respirable particles that can be hazardous to the human body. I iteratively tested different amounts of turbulent particles in a steady-state flow. The goal of this testing was to discover how Fluent handles built-in Rosin-Rammler distributions for particle injections. I worked on the health physics flow problems and distribution analysis under the direction of two mentors, Bruce Letellier and Dave Decroix. I set up andmore » ran particle injection calculations using Fluent. I tried different combinations of input parameters to produce sets of 500,000, 1 million, and 1.5 million particles to determine what a good test case would be for future experiments. I performed a variety of tasks in my work as an Undergraduate Student Intern at LANL this summer, and learned how to use a powerful CFD application in addition to expanding my skills in MATLAB. I enjoyed my work at LANL and hope to be able to use the experience here to further my career in the future working in a security-conscious environment. My mentors provided guidance and help with all of my projects and I am grateful for the opportunity to work at Los Alamos National Laboratory.« less

Anisotropic Resistivity Forward Modelling Using Automatic Generated Higher-order Finite Element Codes

NASA Astrophysics Data System (ADS)

Wang, W.; Liu, J.

2016-12-01

Forward modelling is the general way to obtain responses of geoelectrical structures. Field investigators might find it useful for planning surveys and choosing optimal electrode configurations with respect to their targets. During the past few decades much effort has been put into the development of numerical forward codes, such as integral equation method, finite difference method and finite element method. Nowadays, most researchers prefer the finite element method (FEM) for its flexible meshing scheme, which can handle models with complex geometry. Resistivity Modelling with commercial sofewares such as ANSYS and COMSOL is convenient, but like working with a black box. Modifying the existed codes or developing new codes is somehow a long period. We present a new way to obtain resistivity forward modelling codes quickly, which is based on the commercial sofeware FEPG (Finite element Program Generator). Just with several demanding scripts, FEPG could generate FORTRAN program framework which can easily be altered to adjust our targets. By supposing the electric potential is quadratic in each element of a two-layer model, we obtain quite accurate results with errors less than 1%, while more than 5% errors could appear by linear FE codes. The anisotropic half-space model is supposed to concern vertical distributed fractures. The measured apparent resistivities along the fractures are bigger than results from its orthogonal direction, which are opposite of the true resistivities. Interpretation could be misunderstood if this anisotropic paradox is ignored. The technique we used can obtain scientific codes in a short time. The generated powerful FORTRAN codes could reach accurate results by higher-order assumption and can handle anisotropy to make better interpretations. The method we used could be expand easily to other domain where FE codes are needed.

A cross-sectional examination of marketing of electronic cigarettes on Twitter.

PubMed

Huang, Jidong; Kornfield, Rachel; Szczypka, Glen; Emery, Sherry L

2014-07-01

Rapid increases in marketing of e-cigarettes coincide with growth in e-cigarette use in recent years; however, little is known about how e-cigarettes are marketed on social media platforms. Keywords were used to collect tweets related to e-cigarettes from the Twitter Firehose between 1 May 2012 and 30 June 2012. Tweets were coded for smoking cessation mentions, as well as health and safety mentions, and were classified as commercial or non-commercial ('organic') tweets using a combination of Naïve Bayes machine learning methods, keyword algorithms and human coding. Metadata associated with each tweet were used to examine the characteristics of accounts tweeting about e-cigarettes. 73,672 tweets related to e-cigarettes were captured in the study period, 90% of which were classified as commercial tweets. Accounts tweeting commercial e-cigarette content were associated with lower Klout scores, a measure of influence. Commercial tweeting was largely driven by a small group of highly active accounts, and 94% of commercial tweets included links to websites, many of which sell or promote e-cigarettes. Approximately 10% of commercial and organic tweets mentioned smoking cessation, and 34% of commercial tweets included mentions of prices or discounts for e-cigarettes. Twitter appears to be an important marketing platform for e-cigarettes. Tweets related to e-cigarettes were overwhelmingly commercial, and a substantial proportion mentioned smoking cessation. E-cigarette marketing on Twitter may have public health implications. Continued surveillance of e-cigarette marketing on social media platforms is needed. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Road safety practices among commercial motorcyclists in a rural town in Nigeria: implications for health education.

PubMed

Amoran, O E; Eme, Owoaje; Giwa, O A; Gbolahan, O B

This cross-sectional, community-based study was carried out among commercial motorcyclists in Igboora. All the commercial motor parks in Igboora were visited and all the commercial motorcyclists who consented to participate in the study were interviewed. Information on the respondents' socio-demographic characteristics, and the practice of road safety measures was collected using an interviewer administered questionnaire. A total of 299 motorcyclists were interviewed. All (100%) of them were males. The mean age of the respondents was 27.4 +/- 7.4 years. One hundred eighty-two (60.7%) of the motorcyclists had the correct knowledge of the purpose of Highway Code. Only 70 (23.3%) could recognize more than half of the currently used road safety codes and 47 (15.7%) obey these road safety codes more than half of the time they see it. Only 183 (61.2%) of them had a driving license and 72 (24.1%) were able to produce these licenses on demand. All (100%) of the respondents did not use any protective helmet. Those who have longer years of working experience, higher level of education and higher knowledge of the safety codes practice it more regularly (r = 0.198, p = 0.001, chi2= 9.31, p = 0.025, and r = 0.28, p = 0.001 respectively). One hundred thirty-six (45.5%) have been involved in at least one accident in the preceding year. The overall incidence of road traffic accident was 2.16 per 1,000. There was however on statistically significant association between the practice of road safety codes and the occurrence of road traffic accidents (chi2= 0.176, p = 0.916). The study shows that the practice of road safety measures was low in this rural Nigerian community and was not associated with the incidence of road traffic accidents. Introducing road safety education particularly targeted at educating the motorcyclists on the importance and practice of road safety measures would lead to an increase in the practice of the safety measures and hopefully a reduction in the incidence of road traffic accidents.

Cognitive grammar and aphasic discourse.

PubMed

Manning, Molly; Franklin, Sue

2016-01-01

In cognitive grammar (CG), there is no clear division between language and other cognitive processes; all linguistic form is conceptually meaningful. In this pilot study, a CG approach was applied to investigate whether people with aphasia (PWA) have cognitive linguistic difficulty not predicted from traditional, componential models of aphasia. Narrative samples from 22 PWA (6 fluent, 16 non-fluent) were compared with samples from 10 participants without aphasia. Between-group differences were tested statistically. PWA had significant difficulty with temporal sequencing, suggesting problems that are not uniquely linguistic. For some, these problems were doubly dissociated with naming, used as a general measure of severity, which indicates that cognitive linguistic difficulties are not linked with more widespread brain damage. Further investigation may lead to a richer account of aphasia in line with contemporary linguistics and cognitive science approaches.

IMAT graphics manual

NASA Technical Reports Server (NTRS)

Stockwell, Alan E.; Cooper, Paul A.

1991-01-01

The Integrated Multidisciplinary Analysis Tool (IMAT) consists of a menu driven executive system coupled with a relational database which links commercial structures, structural dynamics and control codes. The IMAT graphics system, a key element of the software, provides a common interface for storing, retrieving, and displaying graphical information. The IMAT Graphics Manual shows users of commercial analysis codes (MATRIXx, MSC/NASTRAN and I-DEAS) how to use the IMAT graphics system to obtain high quality graphical output using familiar plotting procedures. The manual explains the key features of the IMAT graphics system, illustrates their use with simple step-by-step examples, and provides a reference for users who wish to take advantage of the flexibility of the software to customize their own applications.

A Study of Fan Stage/Casing Interaction Models

NASA Technical Reports Server (NTRS)

Lawrence, Charles; Carney, Kelly; Gallardo, Vicente

2003-01-01

The purpose of the present study is to investigate the performance of several existing and new, blade-case interactions modeling capabilities that are compatible with the large system simulations used to capture structural response during blade-out events. Three contact models are examined for simulating the interactions between a rotor bladed disk and a case: a radial and linear gap element and a new element based on a hydrodynamic formulation. The first two models are currently available in commercial finite element codes such as NASTRAN and have been showed to perform adequately for simulating rotor-case interactions. The hydrodynamic model, although not readily available in commercial codes, may prove to be better able to characterize rotor-case interactions.

Interactive QR code beautification with full background image embedding

NASA Astrophysics Data System (ADS)

Lin, Lijian; Wu, Song; Liu, Sijiang; Jiang, Bo

2017-06-01

QR (Quick Response) code is a kind of two dimensional barcode that was first developed in automotive industry. Nowadays, QR code has been widely used in commercial applications like product promotion, mobile payment, product information management, etc. Traditional QR codes in accordance with the international standard are reliable and fast to decode, but are lack of aesthetic appearance to demonstrate visual information to customers. In this work, we present a novel interactive method to generate aesthetic QR code. By given information to be encoded and an image to be decorated as full QR code background, our method accepts interactive user's strokes as hints to remove undesired parts of QR code modules based on the support of QR code error correction mechanism and background color thresholds. Compared to previous approaches, our method follows the intention of the QR code designer, thus can achieve more user pleasant result, while keeping high machine readability.

What Are Those Checkerboard Things? How Quick Response Codes Can Enrich Student Projects

ERIC Educational Resources Information Center

Tucker, Al

2011-01-01

Students enrolled in the author's commercial arts program design and publish the school's yearbook. For the 2010-2011 school year, the students applied Quick Response (QR) code technology to include links to events that occurred after the yearbook's print deadline, including graduation. The technology has many applications in the school setting,…

Universities and Industry: Does the Lambert Code of Governance Meet the Requirements of Good Governance?

ERIC Educational Resources Information Center

Buckland, Roger

2004-01-01

The Lambert Model Code of Governance proposes to institutionalise the dominance of governors from commercial and industrial organisations as core members of compact and effective boards controlling UK universities. It is the latest expression of a fashion for viewing university governance as an overly-simple example of an obsolete system, where…

78 FR 78819 - National Conference on Weights and Measures 99th Interim Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

... 44: General Code Item 310-2 G.S.5.6. Recorded Representations. A variety of commercial weighing and... protections for buyers and sellers alike. This item is a proposal to revise the General Code requirement to... high-precision balances that are typically used by precious metal and gem buyers have built balances...

The U.C.C. (Sales) as an Introductory Law School Course.

ERIC Educational Resources Information Center

Brown, Ronald Benton

1980-01-01

A provisional admissions program at Nova University Law Center allows students who do not qualify for admission to take two summer courses to prove their ability to succeed. One of the courses offered, Commercial Transactions I (Sales), which covers parts of the Uniform Commercial Code, is described and its suitability for beginning law students…

Methodology, status and plans for development and assessment of HEXTRAN, TRAB and APROS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vanttola, T.; Rajamaeki, M.; Tiihonen, O.

1997-07-01

A number of transient and accident analysis codes have been developed in Finland during the past twenty years mainly for the needs of their own power plants, but some of the codes have also been utilized elsewhere. The continuous validation, simultaneous development and experiences obtained in commercial applications have considerably improved the performance and range of application of the codes. At present, the methods allow fairly covering accident analysis of the Finnish nuclear power plants.

Numerical Simulation of MIG for 42 GHz, 200 kW Gyrotron

NASA Astrophysics Data System (ADS)

Singh, Udaybir; Bera, Anirban; Kumar, Narendra; Purohit, L. P.; Sinha, Ashok K.

2010-06-01

A triode type magnetron injection gun (MIG) of a 42 GHz, 200 kW gyrotron for an Indian TOKAMAK system is designed by using the commercially available code EGUN. The operating voltages of the modulating anode and the accelerating anode are 29 kV and 65 kV respectively. The operating mode of the gyrotron is TE03 and it is operated in fundamental harmonic. The simulated results of MIG obtained with the EGUN code are validated with another trajectory code TRAK.

The Ruggedized STD Bus Microcomputer - A low cost computer suitable for Space Shuttle experiments

NASA Technical Reports Server (NTRS)

Budney, T. J.; Stone, R. W.

1982-01-01

Previous space flight computers have been costly in terms of both hardware and software. The Ruggedized STD Bus Microcomputer is based on the commercial Mostek/Pro-Log STD Bus. Ruggedized PC cards can be based on commercial cards from more than 60 manufacturers, reducing hardware cost and design time. Software costs are minimized by using standard 8-bit microprocessors and by debugging code using commercial versions of the ruggedized flight boards while the flight hardware is being fabricated.

Computational Investigation of Novel Tip Leakage Mitigation Methods for High Pressure Turbine Blades

NASA Technical Reports Server (NTRS)

Ibrahim, Mounir; Gupta, Abhinav; Shyam, Vikram

2014-01-01

This paper presents preliminary findings on a possible approach to reducing tip leakage losses. In this paper a computational study was conducted on the Energy Efficient Engine (EEE) High Pressure Turbine (HPT) rotor tip geometry using the commercial numerical solver ANSYS FLUENT. The flow solver was validated against aerodynamic data acquired in the NASA Transonic Turbine Blade Cascade facility. The scope of the ongoing study is to computationally investigate how the tip leakage and overall blade losses are affected by (1) injection from the tip near the pressure side, (2) injection from the tip surface at the camber line, and (3) injection from the tip surface into the tip separation bubble. The objective is to identify the locations on the tip surface at which to place appropriately configured blowing keeping in mind the film cooling application of tip blowing holes. The validation was conducted at Reynolds numbers of 85,000, 343,000, and 685,000 and at engine realistic flow conditions. The coolant injection simulations were conducted at a Reynolds number of 343,000 based on blade chord and inlet velocity and utilized the SST turbulence model in FLUENT. The key parameters examined are the number of jets, jet angle and jet location. A coolant to inlet pressure ratio of 1.0 was studied for angles of +30 deg, -30 deg, and 90 deg to the local free stream on the tip. For the 3 hole configuration, 3 holes spaced 3 hole diameters apart with length to diameter ratio of 1.5 were used. A simulation including 11 holes along the entire mean camber line is also presented (30 deg toward suction side). In addition, the effect of a single hole is also compared to a flat tip with no injection. The results provide insight into tip flow control methods and can be used to guide further investigation into tip flow control. As noted in past research it is concluded that reducing leakage flow is not necessarily synonymous with reducing losses due to leakage.

Computational Investigation of Novel Tip Leakage Mitigation Methods for High Pressure Turbine Blades

NASA Technical Reports Server (NTRS)

Ibrahim, Mounir; Gupta, Abhinav; Shyam, Vikram

2014-01-01

This paper presents preliminary findings on a possible approach to reducing tip leakage losses. In this paper a computational study was conducted on the EEE (Energy Efficient Engine) HPT (High Pressure Turbine) rotor tip geometry using the commercial numerical solver ANSYS FLUENT. The flow solver was validated against aerodynamic data acquired in the NASA Transonic Turbine Blade Cascade facility. The scope of the ongoing study is to computationally investigate how the tip leakage and overall blade losses are affected by 1. injection from the tip near the pressure side, 2. injection from the tip surface at the camber line, and 3. injection from the tip surface into the tip separation bubble. The objective is to identify the locations on the tip surface at which to place appropriately configured blowing keeping in mind the film cooling application of tip blowing holes. The validation was conducted at Reynolds numbers of 85,000, 343,000 and 685,000 and at engine realistic flow conditions. The coolant injection simulations were conducted at a Reynolds number of 343,000 based on blade chord and inlet velocity and utilized the SST turbulence model in FLUENT. The key parameters examined are the number of jets, jet angle and jet location. A coolant to inlet pressure ratio of 1.0 was studied for angles of +30 deg., -30 deg. and 90 deg. to the local free stream on the tip. For the 3 hole configuration, 3 holes spaced 3 hole diameters apart with length to diameter ratio of 1.5 were used. A simulation including 11 holes along the entire mean camber line is also presented (30 degrees toward suction side). In addition, the effect of a single hole is also compared to a flat tip with no injection. The results provide insight into tip flow control methods and can be used to guide further investigation into tip flow control. As noted in past research it is concluded that reducing leakage flow is not necessarily synonymous with reducing losses due to leakage.

Methodology for Evaluating Cost-effectiveness of Commercial Energy Code Changes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Liu, Bing

This document lays out the U.S. Department of Energy’s (DOE’s) method for evaluating the cost-effectiveness of energy code proposals and editions. The evaluation is applied to provisions or editions of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 90.1 and the International Energy Conservation Code (IECC). The method follows standard life-cycle cost (LCC) economic analysis procedures. Cost-effectiveness evaluation requires three steps: 1) evaluating the energy and energy cost savings of code changes, 2) evaluating the incremental and replacement costs related to the changes, and 3) determining the cost-effectiveness of energy code changes based on those costs andmore » savings over time.« less

The Treatment of Non-Fluent Utterance--A Behavioral Approach

ERIC Educational Resources Information Center

Wohl, Maud T.

1970-01-01

Indicates that a behavioral approach, utilizing an electronic metronome in speech and motor activities, is highly effective in reducing the occurrence of stammering in children and adults. Bibliography. (RW)

Non-classical continuum theory for fluids incorporating internal and Cosserat rotation rates

NASA Astrophysics Data System (ADS)

Surana, K. S.; Joy, A. D.; Reddy, J. N.

2017-11-01

This paper presents a non-classical continuum theory for fluent continua in which the conservation and balance laws are derived by incorporating both internal rotation rates arising from the velocity gradient tensor and the rotation rates of the Cosserats. Specifically, in this non-classical continuum theory we have (1) the usual velocities (\\bar{ ±b {\\varvec{v }}}), (2) the three internal rotation rates ({}_i^t\\bar{ ±b {\\varvec{Θ }}}) about the axes of a fixed triad whose axes are parallel to the x-frame arising from the velocity gradient tensor (\\bar{ ±b {\\varvec{L }}}) that are completely defined by the antisymmetric part of the velocity gradient tensor, and (3) three additional rotation rates ({}_e^t\\bar{ ±b {\\varvec{Θ }}}) about the axes of the same triad located at each material point as additional three unknown degrees of freedom, referred to as Cosserat rotation rates. This gives rise to \\bar{ ±b {\\varvec{v }}} and {}_e^t\\bar{ ±b {\\varvec{Θ }}} as six degrees of freedom at a material point. The internal rotation rates {}_i^t\\bar{ ±b {\\varvec{Θ }}}, often neglected in classical fluid mechanics, exist in all deforming fluent continua as these are due to velocity gradient tensor. When the internal rotation rates {}_i^t\\bar{ ±b {\\varvec{Θ }}} are resisted by deforming fluent continua, conjugate moment tensor arises that together with {}_i^t\\bar{ ±b {\\varvec{Θ }}} may result in energy storage and/or dissipation, which must be considered in the conservation and balance laws. The Cosserat rotation rations {}_e^t\\bar{ ±b {\\varvec{Θ }}} also result in conjugate moment tensor that together with {}_e^t\\bar{ ±b {\\varvec{Θ }}} may also result in energy storage and/or dissipation. The main focus of this paper is a consistent derivation of conservation and balance laws for fluent continua that incorporate the aforementioned physics and associated constitutive theories for thermofluids using the conditions resulting from the entropy inequality. The material coefficients derived in the constitutive theories are clearly defined and discussed.

White matter damage in primary progressive aphasias: a diffusion tensor tractography study

PubMed Central

Galantucci, Sebastiano; Tartaglia, Maria Carmela; Wilson, Stephen M.; Henry, Maya L.; Filippi, Massimo; Agosta, Federica; Dronkers, Nina F.; Henry, Roland G.; Ogar, Jennifer M.; Miller, Bruce L.

2011-01-01

Primary progressive aphasia is a clinical syndrome that encompasses three major phenotypes: non-fluent/agrammatic, semantic and logopenic. These clinical entities have been associated with characteristic patterns of focal grey matter atrophy in left posterior frontoinsular, anterior temporal and left temporoparietal regions, respectively. Recently, network-level dysfunction has been hypothesized but research to date has focused largely on studying grey matter damage. The aim of this study was to assess the integrity of white matter tracts in the different primary progressive aphasia subtypes. We used diffusion tensor imaging in 48 individuals: nine non-fluent, nine semantic, nine logopenic and 21 age-matched controls. Probabilistic tractography was used to identify bilateral inferior longitudinal (anterior, middle, posterior) and uncinate fasciculi (referred to as the ventral pathway); and the superior longitudinal fasciculus segmented into its frontosupramarginal, frontoangular, frontotemporal and temporoparietal components, (referred to as the dorsal pathway). We compared the tracts’ mean fractional anisotropy, axial, radial and mean diffusivities for each tract in the different diagnostic categories. The most prominent white matter changes were found in the dorsal pathways in non-fluent patients, in the two ventral pathways and the temporal components of the dorsal pathways in semantic variant, and in the temporoparietal component of the dorsal bundles in logopenic patients. Each of the primary progressive aphasia variants showed different patterns of diffusion tensor metrics alterations: non-fluent patients showed the greatest changes in fractional anisotropy and radial and mean diffusivities; semantic variant patients had severe changes in all metrics; and logopenic patients had the least white matter damage, mainly involving diffusivity, with fractional anisotropy altered only in the temporoparietal component of the dorsal pathway. This study demonstrates that both careful dissection of the main language tracts and consideration of all diffusion tensor metrics are necessary to characterize the white matter changes that occur in the variants of primary progressive aphasia. These results highlight the potential value of diffusion tensor imaging as a new tool in the multimodal diagnostic evaluation of primary progressive aphasia. PMID:21666264

Alternative Formats to Achieve More Efficient Energy Codes for Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, David R.; Rosenberg, Michael I.; Halverson, Mark A.

2013-01-26

This paper identifies and examines several formats or structures that could be used to create the next generation of more efficient energy codes and standards for commercial buildings. Pacific Northwest National Laboratory (PNNL) is funded by the U.S. Department of Energy’s Building Energy Codes Program (BECP) to provide technical support to the development of ANSI/ASHRAE/IES Standard 90.1. While the majority of PNNL’s ASHRAE Standard 90.1 support focuses on developing and evaluating new requirements, a portion of its work involves consideration of the format of energy standards. In its current working plan, the ASHRAE 90.1 committee has approved an energy goalmore » of 50% improvement in Standard 90.1-2013 relative to Standard 90.1-2004, and will likely be considering higher improvement targets for future versions of the standard. To cost-effectively achieve the 50% goal in manner that can gain stakeholder consensus, formats other than prescriptive must be considered. Alternative formats that include reducing the reliance on prescriptive requirements may make it easier to achieve these aggressive efficiency levels in new codes and standards. The focus on energy code and standard formats is meant to explore approaches to presenting the criteria that will foster compliance, enhance verification, and stimulate innovation while saving energy in buildings. New formats may also make it easier for building designers and owners to design and build the levels of efficiency called for in the new codes and standards. This paper examines a number of potential formats and structures, including prescriptive, performance-based (with sub-formats of performance equivalency and performance targets), capacity constraint-based, and outcome-based. The paper also discusses the pros and cons of each format from the viewpoint of code users and of code enforcers.« less

ESAS Deliverable PS 1.1.2.3: Customer Survey on Code Generations in Safety-Critical Applications

NASA Technical Reports Server (NTRS)

Schumann, Johann; Denney, Ewen

2006-01-01

Automated code generators (ACG) are tools that convert a (higher-level) model of a software (sub-)system into executable code without the necessity for a developer to actually implement the code. Although both commercially supported and in-house tools have been used in many industrial applications, little data exists on how these tools are used in safety-critical domains (e.g., spacecraft, aircraft, automotive, nuclear). The aims of the survey, therefore, were threefold: 1) to determine if code generation is primarily used as a tool for prototyping, including design exploration and simulation, or for fiight/production code; 2) to determine the verification issues with code generators relating, in particular, to qualification and certification in safety-critical domains; and 3) to determine perceived gaps in functionality of existing tools.

Financial impact to providers using pediatric combination vaccines.

PubMed

Shen, Angela K; Sobczyk, Elizabeth; Simonsen, Lone; Khan, Farid; Esber, Allahna; Andreae, Margie C

2011-12-01

To understand the financial impact to providers for using a combination vaccine (Pediarix [GlaxoSmithKline Biologicals, King of Prussia, PA]) versus its equivalent component vaccines for children aged 1 year or younger. Using a subscription remittance billing service offered to private-practice office-based physicians, we analyzed charge and payment information submitted by providers to insurance payers from June 2007 through July 2009. We analyzed provider and payer characteristics, payer comments, and the ratio of vaccine product to immunization administration (IA) codes and computed total charges and payments to providers for both arms of the study. Most providers in our data set were pediatricians (74%), and most payers were commercial (75%), primarily managed care. The ratio of the number of vaccine products to the number of IAs was 1:1 in the majority of the claims. Twenty percent of claims were paid with no adjustment by the payer, whereas 76% of the claims were adjusted for charges that exceeded the contract arrangement or the fee schedule. Providers received $23 less from commercial payers and $13 less from Medicaid for the use of Pediarix compared with the equivalent component vaccines. The mean commercial payment was greater for age-specific Current Procedural Terminology IA codes 90465 and 90466 than for non-age-specific codes 90471 and 90472, whereas the reverse was true for Medicaid. Providers who administer vaccines to children face a reduction in payment when choosing to provide combination vaccines. The new IA codes should be monitored for correction of financial barriers to the use of combination vaccines.

Technology Infusion of CodeSonar into the Space Network Ground Segment (RII07)

NASA Technical Reports Server (NTRS)

Benson, Markland

2008-01-01

The NASA Software Assurance Research Program (in part) performs studies as to the feasibility of technologies for improving the safety, quality, reliability, cost, and performance of NASA software. This study considers the application of commercial automated source code analysis tools to mission critical ground software that is in the operations and sustainment portion of the product lifecycle.

Least reliable bits coding (LRBC) for high data rate satellite communications

NASA Technical Reports Server (NTRS)

Vanderaar, Mark; Budinger, James; Wagner, Paul

1992-01-01

LRBC, a bandwidth efficient multilevel/multistage block-coded modulation technique, is analyzed. LRBC uses simple multilevel component codes that provide increased error protection on increasingly unreliable modulated bits in order to maintain an overall high code rate that increases spectral efficiency. Soft-decision multistage decoding is used to make decisions on unprotected bits through corrections made on more protected bits. Analytical expressions and tight performance bounds are used to show that LRBC can achieve increased spectral efficiency and maintain equivalent or better power efficiency compared to that of BPSK. The relative simplicity of Galois field algebra vs the Viterbi algorithm and the availability of high-speed commercial VLSI for block codes indicates that LRBC using block codes is a desirable method for high data rate implementations.

Weekend Commercial Children's Television, 1975. A Study of Programming and Advertising to Children on Five Boston Stations.

ERIC Educational Resources Information Center

Barcus, F. Earle

Some 25-1/2 hours of Boston commercial television for children were monitored on a Saturday and Sunday in April 1975. The monitoring covered three network affiliated stations and two independent UHF stations. Monitoring, coding, and editing provided much statistical data, which was analyzed to yield findings in the areas of distribution of…

Ants, Apples and the ABCs: The Use of Commercial Phonics Programmes in Prior-to-School Children's Services

ERIC Educational Resources Information Center

Campbell, Stacey; Torr, Jane; Cologon, Kathy

2012-01-01

Commercial phonics programmes (e.g. Jolly Phonics and Letterland) are becoming widely used in the early years of school. These programmes claim to use a systematic explicit approach, considered as the preferred method of phonics instruction for teaching alphabetic code-breaking skills in Australia and the UK in the first years of school…

78 FR 15672 - Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Snapper-Grouper Fishery Off the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-12

... projected commercial and/or recreational fishing seasons are determined by NMFS to be 3 days or [[Page 15674... length (TL), minimum size limit for both the commercial and recreational sectors to decrease regulatory... Fisheries Service. [FR Doc. 2013-05644 Filed 3-11-13; 8:45 am] BILLING CODE 3510-22-P ...

Soldier, Sailor, Rebel, Rule-Breaker: Masculinity and the Body in the German Far Right

ERIC Educational Resources Information Center

Miller-Idriss, Cynthia

2017-01-01

Drawing on a unique digital archive of thousands of images of far right symbols and commercial products in Germany, combined with 62 interviews conducted with German youth and their teachers in 2013-2014, this article examines young Germans' sense of style and their interpretation of far right-wing symbols and codes in commercial products,…

Monitoring Progress toward Independent Silent Reading.

ERIC Educational Resources Information Center

Franc, Lillian H.; Hildebrandt, Jeannette

1984-01-01

Concludes, among other things, that fluent oral reading is an important step toward reading for meaning and independent silent reading and that silent reading should be encouraged from the beginning of reading instruction. (FL)

Simulation of concentration distribution of urban particles under wind

NASA Astrophysics Data System (ADS)

Chen, Yanghou; Yang, Hangsheng

2018-02-01

The concentration of particulate matter in the air is too high, which seriously affects people’s health. The concentration of particles in densely populated towns is also high. Understanding the distribution of particles in the air helps to remove them passively. The concentration distribution of particles in urban streets is simulated by using the FLUENT software. The simulation analysis based on Discrete Phase Modelling (DPM) of FLUENT. Simulation results show that the distribution of the particles is caused by different layout of buildings. And it is pointed out that in the windward area of the building and the leeward sides of the high-rise building are the areas with high concentration of particles. Understanding the concentration of particles in different areas is also helpful for people to avoid and reduce the concentration of particles in high concentration areas.

The effect of stuttering on communication: a preliminary investigation.

PubMed

Spencer, Elizabeth; Packman, Ann; Onslow, Mark; Ferguson, Alison

2009-07-01

This paper describes a study in which Systemic Functional Linguistics was applied to describe how people who stutter use language. The aim of the study was to determine and describe any differences in language use between a group of 10 adults who stutter and 10 matched normally-fluent speakers. In addition to formal linguistic analyses, analyses drawn from Systemic Functional Linguistics were used to further investigate the expression of both syntactic and semantic complexity. The findings from this study replicated previous findings of Packman et al. in which they found that the language used by people who stutter was significantly less complex than the control group. Another major finding was that adults who stuttered used the linguistic resource of modality significantly less than the normally-fluent matched peers. The implications these strategies have on communication and social participation will be discussed.

Phonemic carryover perseveration: word blends.

PubMed

Buckingham, Hugh W; Christman, Sarah S

2004-11-01

This article will outline and describe the aphasic disorder of recurrent perseveration and will demonstrate how it interacts with the retrieval and production of spoken words in the language of fluent aphasic patients who have sustained damage to the left (dominant) posterior temporoparietal lobe. We will concentrate on the various kinds of sublexical segmental perseverations (the so-called phonemic carryovers of Santo Pietro and Rigrodsky) that most often play a role in the generation of word blendings. We will show how perseverative blends allow the clinician to better understand the dynamics of word and syllable production in fluent aphasia by scrutinizing the "onset/rime" and "onset/superrime" constituents of monosyllabic and polysyllabic words, respectively. We will demonstrate to the speech language pathologist the importance of the trochee stress pattern and the possibility that its metrical template may constitute a structural unit that can be perseverated.

Syntax and conversation in aphasia. A strategic restrictive use of Spanish and Catalan connector QUE by aphasic speakers.

PubMed

Hernández-Sacristán, Carlos; Rosell-Clari, Vicent

2009-10-01

Oral conversational data are deemed to be a relevant empirical source when it comes to formulating and supporting hypotheses about cognitive processes involved in aphasic linguistic production. With this assumption in mind, free conversational uses of the Spanish and Catalan connector QUE by fluent and non-fluent aphasic speakers are examined by contrasting them with normal speakers' (i.e. conversational partners') productions. Strictly ungrammatical uses in aphasic speakers are practically non-existent in free conversation. Nevertheless, this data permits one to characterize the aphasic production of the morpheme QUE as restrictive--to different degrees--with respect to normal production. Moreover, this restriction, selectively affecting the types of syntactic environments examined, can be considered strategic in nature: it is guided by some kind of knowledge about the administration of remnant linguistic resources.

Perception of the Multisensory Coherence of Fluent Audiovisual Speech in Infancy: Its Emergence & the Role of Experience

PubMed Central

Lewkowicz, David J.; Minar, Nicholas J.; Tift, Amy H.; Brandon, Melissa

2014-01-01

To investigate the developmental emergence of the ability to perceive the multisensory coherence of native and non-native audiovisual fluent speech, we tested 4-, 8–10, and 12–14 month-old English-learning infants. Infants first viewed two identical female faces articulating two different monologues in silence and then in the presence of an audible monologue that matched the visible articulations of one of the faces. Neither the 4-month-old nor the 8–10 month-old infants exhibited audio-visual matching in that neither group exhibited greater looking at the matching monologue. In contrast, the 12–14 month-old infants exhibited matching and, consistent with the emergence of perceptual expertise for the native language, they perceived the multisensory coherence of native-language monologues earlier in the test trials than of non-native language monologues. Moreover, the matching of native audible and visible speech streams observed in the 12–14 month olds did not depend on audio-visual synchrony whereas the matching of non-native audible and visible speech streams did depend on synchrony. Overall, the current findings indicate that the perception of the multisensory coherence of fluent audiovisual speech emerges late in infancy, that audio-visual synchrony cues are more important in the perception of the multisensory coherence of non-native than native audiovisual speech, and that the emergence of this skill most likely is affected by perceptual narrowing. PMID:25462038

Perception of the multisensory coherence of fluent audiovisual speech in infancy: its emergence and the role of experience.

PubMed

Lewkowicz, David J; Minar, Nicholas J; Tift, Amy H; Brandon, Melissa

2015-02-01

To investigate the developmental emergence of the perception of the multisensory coherence of native and non-native audiovisual fluent speech, we tested 4-, 8- to 10-, and 12- to 14-month-old English-learning infants. Infants first viewed two identical female faces articulating two different monologues in silence and then in the presence of an audible monologue that matched the visible articulations of one of the faces. Neither the 4-month-old nor 8- to 10-month-old infants exhibited audiovisual matching in that they did not look longer at the matching monologue. In contrast, the 12- to 14-month-old infants exhibited matching and, consistent with the emergence of perceptual expertise for the native language, perceived the multisensory coherence of native-language monologues earlier in the test trials than that of non-native language monologues. Moreover, the matching of native audible and visible speech streams observed in the 12- to 14-month-olds did not depend on audiovisual synchrony, whereas the matching of non-native audible and visible speech streams did depend on synchrony. Overall, the current findings indicate that the perception of the multisensory coherence of fluent audiovisual speech emerges late in infancy, that audiovisual synchrony cues are more important in the perception of the multisensory coherence of non-native speech than that of native audiovisual speech, and that the emergence of this skill most likely is affected by perceptual narrowing. Copyright © 2014 Elsevier Inc. All rights reserved.

Verbal and non-verbal semantic impairment: From fluent primary progressive aphasia to semantic dementia

PubMed Central

Senaha, Mirna Lie Hosogi; Caramelli, Paulo; Porto, Claudia Sellitto; Nitrini, Ricardo

2007-01-01

Selective disturbances of semantic memory have attracted the interest of many investigators and the question of the existence of single or multiple semantic systems remains a very controversial theme in the literature. Objectives To discuss the question of multiple semantic systems based on a longitudinal study of a patient who presented semantic dementia from fluent primary progressive aphasia. Methods A 66 year-old woman with selective impairment of semantic memory was examined on two occasions, undergoing neuropsychological and language evaluations, the results of which were compared to those of three paired control individuals. Results In the first evaluation, physical examination was normal and the score on the Mini-Mental State Examination was 26. Language evaluation revealed fluent speech, anomia, disturbance in word comprehension, preservation of the syntactic and phonological aspects of the language, besides surface dyslexia and dysgraphia. Autobiographical and episodic memories were relatively preserved. In semantic memory tests, the following dissociation was found: disturbance of verbal semantic memory with preservation of non-verbal semantic memory. Magnetic resonance of the brain revealed marked atrophy of the left anterior temporal lobe. After 14 months, the difficulties in verbal semantic memory had become more severe and the semantic disturbance, limited initially to the linguistic sphere, had worsened to involve non-verbal domains. Conclusions Given the dissociation found in the first examination, we believe there is sufficient clinical evidence to refute the existence of a unitary semantic system. PMID:29213389

Moving Controlled Vocabularies into the Semantic Web

NASA Astrophysics Data System (ADS)

Thomas, R.; Lowry, R. K.; Kokkinaki, A.

2015-12-01

One of the issues with legacy oceanographic data formats is that the only tool available for describing what a measurement is and how it was made is a single metadata tag known as the parameter code. The British Oceanographic Data Centre (BODC) has been supporting the international oceanographic community gain maximum benefit from this through a controlled vocabulary known as the BODC Parameter Usage Vocabulary (PUV). Over time this has grown to over 34,000 entries some of which have preferred labels with over 400 bytes of descriptive information detailing what was measured and how. A decade ago the BODC pioneered making this information available in a more useful form with the implementation of a prototype vocabulary server (NVS) that referenced each 'parameter code' as a URL. This developed into the current server (NVS V2) in which the parameter URL resolves into an RDF document based on the SKOS data model which includes a list of resource URLs mapped to the 'parameter'. For example the parameter code for a contaminant in biota, such as 'cadmium in Mytilus edulis', carries RDF triples leading to the entry for Mytilus edulis in the WoRMS and for cadmium in the ChEBI ontologies. By providing links into these external ontologies the information captured in a 1980s parameter code now conforms to the Linked Data paradigm of the Semantic Web, vastly increasing the descriptive information accessible to a user. This presentation will describe the next steps along the road to the Semantic Web with the development of a SPARQL end point1 to expose the PUV plus the 190 other controlled vocabularies held in NVS. Whilst this is ideal for those fluent in SPARQL, most users require something a little more user-friendly and so the NVS browser2 was developed over the end point to allow less technical users to query the vocabularies and navigate the NVS ontology. This tool integrates into an editor that allows vocabulary content to be manipulated by authorised users outside BODC. Having placed Linked Data tooling over a single SPARQL end point the obvious future development for this system is to support semantic interoperability outside NVS by the incorporation of federated SPARQL end points in the USA and Australia during the ODIP II project. 1https://vocab.nerc.ac.uk/sparql 2 https://www.bodc.ac.uk/data/codes_and_formats/vocabulary_search/

Chapter 2: Commercial and Industrial Lighting Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W; Gowans, Dakers; Telarico, Chad

The Commercial and Industrial Lighting Evaluation Protocol (the protocol) describes methods to account for gross energy savings resulting from the programmatic installation of efficient lighting equipment in large populations of commercial, industrial, and other nonresidential facilities. This protocol does not address savings resulting from changes in codes and standards, or from education and training activities. A separate Uniform Methods Project (UMP) protocol, Chapter 3: Commercial and Industrial Lighting Controls Evaluation Protocol, addresses methods for evaluating savings resulting from lighting control measures such as adding time clocks, tuning energy management system commands, and adding occupancy sensors.

Potential Energy Cost Savings from Increased Commercial Energy Code Compliance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, Michael I.; Hart, Philip R.; Athalye, Rahul A.

2016-08-22

An important question for commercial energy code compliance is: “How much energy cost savings can better compliance achieve?” This question is in sharp contrast to prior efforts that used a checklist of code requirements, each of which was graded pass or fail. Percent compliance for any given building was simply the percent of individual requirements that passed. A field investigation method is being developed that goes beyond the binary approach to determine how much energy cost savings is not realized. Prototype building simulations were used to estimate the energy cost impact of varying levels of non-compliance for newly constructed officemore » buildings in climate zone 4C. Field data collected from actual buildings on specific conditions relative to code requirements was then applied to the simulation results to find the potential lost energy savings for a single building or for a sample of buildings. This new methodology was tested on nine office buildings in climate zone 4C. The amount of additional energy cost savings they could have achieved had they complied fully with the 2012 International Energy Conservation Code is determined. This paper will present the results of the test, lessons learned, describe follow-on research that is needed to verify that the methodology is both accurate and practical, and discuss the benefits that might accrue if the method were widely adopted.« less

PARTICIPANT MODELING IN STUTTERING

PubMed Central

Bhargava, S.C.

1988-01-01

SUMMARY Participant modeling was tried in twenty five stutterers; auditory feedback of modelled speech and guided exposure were also done along with. The patients were able to have a fluent stuttering free speech in most situations. PMID:21927289

CFD Modeling of Free-Piston Stirling Engines

NASA Technical Reports Server (NTRS)

Ibrahim, Mounir B.; Zhang, Zhi-Guo; Tew, Roy C., Jr.; Gedeon, David; Simon, Terrence W.

2001-01-01

NASA Glenn Research Center (GRC) is funding Cleveland State University (CSU) to develop a reliable Computational Fluid Dynamics (CFD) code that can predict engine performance with the goal of significant improvements in accuracy when compared to one-dimensional (1-D) design code predictions. The funding also includes conducting code validation experiments at both the University of Minnesota (UMN) and CSU. In this paper a brief description of the work-in-progress is provided in the two areas (CFD and Experiments). Also, previous test results are compared with computational data obtained using (1) a 2-D CFD code obtained from Dr. Georg Scheuerer and further developed at CSU and (2) a multidimensional commercial code CFD-ACE+. The test data and computational results are for (1) a gas spring and (2) a single piston/cylinder with attached annular heat exchanger. The comparisons among the codes are discussed. The paper also discusses plans for conducting code validation experiments at CSU and UMN.

Finite Element Models for Electron Beam Freeform Fabrication Process

NASA Technical Reports Server (NTRS)

Chandra, Umesh

2012-01-01

Electron beam freeform fabrication (EBF3) is a member of an emerging class of direct manufacturing processes known as solid freeform fabrication (SFF); another member of the class is the laser deposition process. Successful application of the EBF3 process requires precise control of a number of process parameters such as the EB power, speed, and metal feed rate in order to ensure thermal management; good fusion between the substrate and the first layer and between successive layers; minimize part distortion and residual stresses; and control the microstructure of the finished product. This is the only effort thus far that has addressed computer simulation of the EBF3 process. The models developed in this effort can assist in reducing the number of trials in the laboratory or on the shop floor while making high-quality parts. With some modifications, their use can be further extended to the simulation of laser, TIG (tungsten inert gas), and other deposition processes. A solid mechanics-based finite element code, ABAQUS, was chosen as the primary engine in developing these models whereas a computational fluid dynamics (CFD) code, Fluent, was used in a support role. Several innovative concepts were developed, some of which are highlighted below. These concepts were implemented in a number of new computer models either in the form of stand-alone programs or as user subroutines for ABAQUS and Fluent codes. A database of thermo-physical, mechanical, fluid, and metallurgical properties of stainless steel 304 was developed. Computing models for Gaussian and raster modes of the electron beam heat input were developed. Also, new schemes were devised to account for the heat sink effect during the deposition process. These innovations, and others, lead to improved models for thermal management and prediction of transient/residual stresses and distortions. Two approaches for the prediction of microstructure were pursued. The first was an empirical approach involving the computation of thermal gradient, solidification rate, and velocity (G,R,V) coupled with the use of a solidification map that should be known a priori. The second approach relies completely on computer simulation. For this purpose a criterion for the prediction of morphology was proposed, which was combined with three alternative models for the prediction of microstructure; one based on solidification kinetics, the second on phase diagram, and the third on differential scanning calorimetry data. The last was found to be the simplest and the most versatile; it can be used with multicomponent alloys and rapid solidification without any additional difficulty. For the purpose of (limited) experimental validation, finite element models developed in this effort were applied to three different shapes made of stainless steel 304 material, designed expressly for this effort with an increasing level of complexity. These finite element models require large computation time, especially when applied to deposits with multiple adjacent beads and layers. This problem can be overcome, to some extent, by the use of fast, multi-core computers. Also, due to their numerical nature coupled with the fact that solid mechanics- based models are being used to represent the material behavior in liquid and vapor phases as well, the models have some inherent approximations that become more pronounced when dealing with multi-bead and multi-layer deposits.

Codes and standards for structural wood products and their use in the United States

Treesearch

David W. Green; Roland Hernandez

1998-01-01

The system of model building codes and voluntary product standards used in the United States for structural lumber and engineered wood products can appear complicated and confusing to those introduced to it for the first time. This paper is a discussion of the various types of structural wood products commonly used in U.S. residential and commercial construction and...

Appraisal of the Effectiveness of CODE; The Coordinated Delivery System for the South Central Research Library Council, January to December 1970.

ERIC Educational Resources Information Center

Faibisoff, Sylvia G.

A major concern of the South Central Research Library Council in establishing an interlibrary loan network was the development of a Coordinated Delivery system (CODE). Several means of delivery were considered--the U.S. mails, commercial trucking (Greyhound, United Parcel Service), and use of the public library system's delivery services. A…

P.L. 102-486, "Energy Policy Act" (1992)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2011-12-13

Amends the Energy Conservation and Production Act to set a deadline by which each State must certify to the Secretary of Energy whether its energy efficiency standards with respect to residential and commercial building codes meet or exceed those of the Council of American Building Officials (CABO) Model Energy Code, 1992, and of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers, respectively.

Determining Market Categorization of United States Zip Codes for Purposes of Army Recruiting

DTIC Science & Technology

2016-06-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release; distribution is unlimited DETERMINING MARKET ...2016 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE DETERMINING MARKET CATEGORIZATION OF UNITED STATES ZIP CODES FOR...Army uses commercial market segmentation data to analyze markets and past accessions to assign recruiters and quotas to maximize production. We use

Valganciclovir Use Among Commercially and Medicaid-insured Infants With Congenital CMV Infection in the United States, 2009-2015.

PubMed

Leung, Jessica; Dollard, Sheila C; Grosse, Scott D; Chung, Winnie; Do, ThuyQuynh; Patel, Manisha; Lanzieri, Tatiana M

2018-03-01

The aim of this study was to assess the clinical characteristics and trends in valganciclovir use among infants diagnosed with congenital cytomegalovirus (CMV) disease in the United States. We analyzed data from medical claims dated 2009-2015 from the Truven Health MarketScan ® Commercial Claims and Encounters and Medicaid databases. We identified infants with a live birth code in the first claim who were continuously enrolled for at least 45 days. Among infants diagnosed with congenital CMV disease, identified by an ICD-9-CM or ICD-10-CM code for congenital CMV infection or CMV disease within 45 days of birth, we assessed data from claims containing codes for any CMV-associated clinical condition within the same period, and data from claims for hearing loss and/or valganciclovir within the first 180 days of life. In the commercial and Medicaid databases, we identified 257 (2.5/10,000) and 445 (3.3/10,000) infants, respectively, diagnosed with congenital CMV disease, among whom 135 (53%) and 282 (63%) had ≥1 CMV-associated condition, 30 (12%) and 32 (7%) had hearing loss, and 41 (16%) and 78 (18%) had a claim for valganciclovir. Among infants with congenital CMV disease who had a claim for valganciclovir, 37 (90%) among commercially insured infants and 68 (87%) among Medicaid-insured infants had ≥1 CMV-associated condition and/or hearing loss. From 2009 to 2015, the percentages with a claim for valganciclovir increased from 0% to 29% among commercially insured infants and from 4% to 37% among Medicaid-insured infants (P < 0.0001). During 2009-2015, there was a strong upward trend in valganciclovir claims among insured infants who were diagnosed with congenital CMV disease, the majority of whom had CMV-associated conditions and/or hearing loss. Published by Elsevier Inc.

Health effects of agrochemicals among farm workers in commercial farms of Kwekwe district, Zimbabwe

PubMed Central

Magauzi, Regis; Mabaera, Bigboy; Rusakaniko, Simbarashe; Chimusoro, Anderson; Ndlovu, Nqobile; Tshimanga, Mufuta; Shambira, Gerald; Chadambuka, Addmore; Gombe, Notion

2011-01-01

Introduction Farm workers are at a very high risk of occupational diseases due to exposure to pesticides resulting from inadequate education, training and safety systems. The farm worker spends a lot of time exposed to these harmful agrochemicals. Numerous acute cases with symptoms typical of agrochemical exposure were reported from the commercial farms. We assessed the health effects of agrochemicals in farm workers in commercial farms of Kwekwe District (Zimbabwe), in 2006. Methods An analytical cross sectional study was conducted amongst a sample of 246 farm workers who handled agrochemicals when discharging their duties in the commercial farms. Plasma cholinesterase activity in blood specimens obtained from farm workers was measured using spectrophotometry to establish levels of poisoning by organophosphate and/or carbamates. Information on the knowledge, attitudes and practices of farm workers on agrochemicals use was collected using a pre-tested interviewer administered questionnaire. Bivariate and multivariate analyses were conducted to determine factors that were associated with abnormal cholinesterase activity. Results The prevalence of organophosphate poisoning, indicated by cholinesterase activity of 75% or less, was 24.1%. The median period of exposure to agrochemicals was 3 years (Q1:=1 year, Q3:=7 years). Ninety eight (41.5%) farm workers knew the triangle colour code for the most dangerous agrochemicals. Not being provided with personal protective equipment (OR 2.00; 95% CI: 1.07 – 3.68) and lack of knowledge of the triangle colour code for most dangerous agrochemicals (OR 2.02; 95% CI: 1.02 – 4.03) were significantly associated with abnormal cholinesterase activity. Conclusion There was organophosphate poisoning in the commercial farms. Factors that were significantly associated with the poisoning were lack of protective clothing and lack of knowledge of the triangle colour code for most dangerous agrochemicals. We recommended intensive health education and training of farm workers on the use of agrochemicals, provision of adequate and proper personal protective equipment as mitigation measures to this problem. PMID:22145061

Health effects of agrochemicals among farm workers in commercial farms of Kwekwe district, Zimbabwe.

PubMed

Magauzi, Regis; Mabaera, Bigboy; Rusakaniko, Simbarashe; Chimusoro, Anderson; Ndlovu, Nqobile; Tshimanga, Mufuta; Shambira, Gerald; Chadambuka, Addmore; Gombe, Notion

2011-01-01

Farm workers are at a very high risk of occupational diseases due to exposure to pesticides resulting from inadequate education, training and safety systems. The farm worker spends a lot of time exposed to these harmful agrochemicals. Numerous acute cases with symptoms typical of agrochemical exposure were reported from the commercial farms. We assessed the health effects of agrochemicals in farm workers in commercial farms of Kwekwe District (Zimbabwe), in 2006. An analytical cross sectional study was conducted amongst a sample of 246 farm workers who handled agrochemicals when discharging their duties in the commercial farms. Plasma cholinesterase activity in blood specimens obtained from farm workers was measured using spectrophotometry to establish levels of poisoning by organophosphate and/or carbamates. Information on the knowledge, attitudes and practices of farm workers on agrochemicals use was collected using a pre-tested interviewer administered questionnaire. Bivariate and multivariate analyses were conducted to determine factors that were associated with abnormal cholinesterase activity. The prevalence of organophosphate poisoning, indicated by cholinesterase activity of 75% or less, was 24.1%. The median period of exposure to agrochemicals was 3 years (Q(1):=1 year, Q(3):=7 years). Ninety eight (41.5%) farm workers knew the triangle colour code for the most dangerous agrochemicals. Not being provided with personal protective equipment (OR 2.00; 95% CI: 1.07 - 3.68) and lack of knowledge of the triangle colour code for most dangerous agrochemicals (OR 2.02; 95% CI: 1.02 - 4.03) were significantly associated with abnormal cholinesterase activity. There was organophosphate poisoning in the commercial farms. Factors that were significantly associated with the poisoning were lack of protective clothing and lack of knowledge of the triangle colour code for most dangerous agrochemicals. We recommended intensive health education and training of farm workers on the use of agrochemicals, provision of adequate and proper personal protective equipment as mitigation measures to this problem.

Annual Coded Wire Tag Program; Oregon Missing Production Groups, 1995 Annual Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garrison, Robert L.; Mallette, Christine; Lewis, Mark A.

1995-12-01

Bonneville Power Administration is the funding source for the Oregon Department of Fish and Wildlife`s Annual Coded Wire Tag Program - Oregon Missing Production Groups Project. Tule brood fall chinook were caught primarily in the British Columbia, Washington and northern Oregon ocean commercial fisheries. The up-river bright fall chinook contributed primarily to the Alaska and British Columbia ocean commercial fisheries and the Columbia River gillnet fishery. Contribution of Rogue fall chinook released in the lower Columbia River system occurred primarily in the Oregon ocean commercial and Columbia river gillnet fisheries Willamette spring chinook salmon contributed primarily to the Alaska andmore » British Columbia ocean commercial, Oregon freshwater sport and Columbia River gillnet fisheries. Restricted ocean sport and commercial fisheries limited contribution of the Columbia coho released in the Umatilla River that survived at an average rate of 1.05% and contributed primarily to the Washington, Oregon and California ocean sport and commercial fisheries and the Columbia River gillnet fishery. The 1987 to 1991 brood years of coho released in the Yakima River survived at an average rate of 0.64% and contributed primarily to the Washington, Oregon and California ocean sport and commercial fisheries and the Columbia River gillnet fishery. Survival rates of salmon and steelhead are influenced, not only by factors in the hatchery, disease, density, diet and size and time of release, but also by environmental factors in the river and ocean. These environmental factors are controlled by large scale weather patterns such as El Nino over which man has no influence. Man could have some influence over river flow conditions, but political and economic pressures generally out weigh the biological needs of the fish.« less

Numerical investigation of thermal-hydraulic performance of channel with protrusions by turbulent cross flow jet

NASA Astrophysics Data System (ADS)

Sahu, M. K.; Pandey, K. M.; Chatterjee, S.

2018-05-01

In this two dimensional numerical investigation, small rectangular channel with right angled triangular protrusions in the bottom wall of test section is considered. A slot nozzle is placed at the middle of top wall of channel which impinges air normal to the protruded surface. A duct flow and nozzle flow combined to form cross flow which is investigated for heat transfer enhancement of protruded channel. The governing equations for continuity, momentum, energy along with SST k-ω turbulence model are solved with finite volume based Computational fluid dynamics code ANSYS FLUENT 14.0. The range of duct Reynolds number considered for this analysis is 8357 to 51760. The ratios of pitch of protrusion to height of duct considered are 0.5, 0.64 and 0.82. The ratios of height of protrusion to height of duct considered are 0.14, 0.23 and 0.29. The effect of duct Reynolds number, pitch and height of protrusion on thermal-hydraulic performance is studied under cross flow condition. It is found that heat transfer rate is more at relatively larger pitch and small pressure drop is found in case of low height of protrusion.

Reynolds-Averaged Navier-Stokes Solutions to Flat Plate Film Cooling Scenarios

NASA Technical Reports Server (NTRS)

Johnson, Perry L.; Shyam, Vikram; Hah, Chunill

2011-01-01

The predictions of several Reynolds-Averaged Navier-Stokes solutions for a baseline film cooling geometry are analyzed and compared with experimental data. The Fluent finite volume code was used to perform the computations with the realizable k-epsilon turbulence model. The film hole was angled at 35 to the crossflow with a Reynolds number of 17,400. Multiple length-to-diameter ratios (1.75 and 3.5) as well as momentum flux ratios (0.125 and 0.5) were simulated with various domains, boundary conditions, and grid refinements. The coolant to mainstream density ratio was maintained at 2.0 for all scenarios. Computational domain and boundary condition variations show the ability to reduce the computational cost as compared to previous studies. A number of grid refinement and coarsening variations are compared for further insights into the reduction of computational cost. Liberal refinement in the near hole region is valuable, especially for higher momentum jets that tend to lift-off and create a recirculating flow. A lack of proper refinement in the near hole region can severely diminish the accuracy of the solution, even in the far region. The effects of momentum ratio and hole length-to-diameter ratio are also discussed.

Effect of isolator plates on telecom shelter

NASA Astrophysics Data System (ADS)

Drid, M. Mebrouk; Dokkar, Boubekeur; Dokkar, Abdelghani; Settou, Noureddine; Chennouf, Nasreddine

2018-05-01

Passive ventilation systems are being increasingly proposed as an alternate to mechanical ventilation systems. This tendency is due to their potential benefits in terms of operational cost, energy requirement and carbon dioxide emission. In the present work, fresh flow is introduced under external isolator plates in order to reduce indoor temperature of telecom shelter located at neighboring of Ouargla city (south of Algeria). The metallic plates play two roles; the first one is to protect shelter from sun rays and the second is to operate as solar chimney. This chimney creates upward airflow which operates as passive cooling for the microwave relay. During the whole year, Shelter audit energy has been examined using Trnsys 16 software. Then, CFD code (Fluent 6.3) is used to predict thermal performance and fluid flow in two-dimensional computational domain for solar chimneys. The obtained results show that flow increase at shelter inlet causes a marked improvement in shelter cooling. This improvement indicates that shelter can be designed with small conventional air conditioning which leads to significant energy consumption fall. Indeed, with this technique, indoor temperature reduction can reach about 30°K without any electrical energy dispenses.

Iron catalyst chemistry in modeling a high-pressure carbon monoxide nanotube reactor

NASA Technical Reports Server (NTRS)

Scott, Carl D.; Povitsky, Alexander; Dateo, Christopher; Gokcen, Tahir; Willis, Peter A.; Smalley, Richard E.

2003-01-01

The high-pressure carbon monoxide (HiPco) technique for producing single-wall carbon nanotubes (SWNTs) is analyzed with the use of a chemical reaction model coupled with flow properties calculated along streamlines, calculated by the FLUENT code for pure carbon monoxide. Cold iron pentacarbonyl, diluted in CO at about 30 atmospheres, is injected into a conical mixing zone, where hot CO is also introduced via three jets at 30 degrees with respect to the axis. Hot CO decomposes the Fe(CO)5 to release atomic Fe. Then iron nucleates and forms clusters that catalyze the formation of SWNTs by a disproportionation reaction (Boudouard) of CO on Fe-containing clusters. Alternative nucleation rates are estimated from the theory of hard sphere collision dynamics with an activation energy barrier. The rate coefficient for carbon nanotube growth is estimated from activation energies in the literature. The calculated growth was found be about an order of magnitude greater than measured, regardless of the nucleation rate. A study of cluster formation in an incubation zone prior to injection into the reactor shows that direct dimer formation from Fe atoms is not as important as formation via an exchange reaction of Fe with CO in FeCO.

Unsteady Flow Dynamics and Acoustics of Two-Outlet Centrifugal Fan Design

NASA Astrophysics Data System (ADS)

Wong, I. Y. W.; Leung, R. C. K.; Law, A. K. Y.

2011-09-01

In this study, a centrifugal fan design with two flow outlets is investigated. This design aims to provide high mass flow rate but low noise performance. Two dimensional unsteady flow simulation with CFD code (FLUENT 6.3) is carried out to analyze the fan flow dynamics and its acoustics. The calculations were done using the unsteady Reynolds averaged Navier Stokes (URANS) approach in which effects of turbulence were accounted for using κ-ɛ model. This work aims to provide an insight how the dominant noise source mechanisms vary with a key fan geometrical paramters, namely, the ratio between cutoff distance and the radius of curvature of the fan housing. Four new fan designs were calculated. Simulation results show that the unsteady flow-induced forces on the fan blades are found to be the main noise sources. The blade force coefficients are then used to build the dipole source terms in Ffowcs Williams and Hawkings (FW-H) Equation for estimating their noise effects. It is found that one design is able to deliver a mass flow 34% more, but with sound pressure level (SPL) 10 dB lower, than the existing design .

Numerical analysis of the flow separation and adverse pressure gradient in laminar boundary layer over a flat plate due to a rotating cylinder in the vicinity

NASA Astrophysics Data System (ADS)

Afroz, Farhana; Sharif, Muhammad A. R.

2018-04-01

Generation of adverse pressure gradient (APG) in the boundary layer over a plane wall using a rotating cylinder close to the wall has been numerically investigated for a range of the freestream Reynolds number (50 ≤ Re ≤ 400), the cylinder rotation rate (0 ≤ α ≤ 2), and the cylinder to wall gap (0.125 ≤ G/D ≤ 2). Various combinations of these flow parameters have been considered and the transient flow is computed using the ANSYS Fluent CFD code. The magnitude of the APG has been quantified. The influence of the freestream Reynolds number on the dynamics of flow separation and cylinder wake has been examined. Reynolds number has strong effect on bubble size properties and APG magnitude. Drag and lift force coefficient on the cylinder are also computed which are found to be strong function of the Reynolds number. Higher Reynolds number results in complex laminar separation bubble on the wall. A parametric demarcation map showing the threshold combinations of the flow parameters for transition from steady to periodic unsteady flow is generated.

Sentence Position and Syntactic Complexity of Stuttering in Early Childhood: A Longitudinal Study

PubMed Central

Buhr, Anthony P.; Zebrowski, Patricia M.

2009-01-01

The purpose of the present investigation was to assess longitudinal word- and sentence-level measures of stuttering in young children. Participants included 12 stuttering and non-stuttering children between 36 and 71 months of age at an initial who exhibited a range of stuttering rates. Parent-child spontaneous speech samples were obtained over a period of two years at six-month intervals. Each speech sample was transcribed, and both stuttering-like disfluencies (SLDs) and other disfluencies (ODs) were coded. Word and sentence-level measures of SLDs were used to assess linguistic characteristics of stuttering. Results of the word-level analysis indicated that stuttering was most likely to occur at the sentence-initial position, but that a tendency to stutter on function words was present only at the sentence-initial position. Results of the sentence-level analyses indicated that sentences containing ODs and those containing SLDs were both significantly longer and more complex than fluent sentences, but did not differ from each other. Word- and sentence-level measures also did not change across visits. Results were taken to suggest that both SLDs and ODs originate during the same stage of sentence planning. PMID:19948270

Numerical Studies on the Performance of Scramjet Combustor with Alternating Wedge-Shaped Strut Injector

NASA Astrophysics Data System (ADS)

Choubey, Gautam; Pandey, K. M.

2017-04-01

Numerical analysis of the supersonic combustion and flow structure through a scramjet engine at Mach 7 with alternating wedge fuel injection and with three angle of attack (α=-3°, α=0°, α=3°) have been studied in the present research article. The configuration used here is slight modification of the Rabadan et al. scramjet model. Steady two dimensional (2D) Reynolds-averaged Navier-Stokes (RANS) simulation and Shear stress transport (SST) based on k-ω turbulent model is used to predict the shock structure and combustion phenomenon inside the scramjet combustor. All the simulations are done by using Ansys 14-Fluent code. The combustion model used here is the combination of eddy dissipation and finite rate chemistry models since this model avoids Arrhenius calculations in which reaction rates are controlled by turbulence. Present results show that the geometry with negative angle of attack (α=-3°) have lowest ignition delay and it improves the performance of scramjet combustor as compared to geometry with α=0°, α=3°. The combustion phenomena and efficiency is also found to be stronger and highest in case of α=-3°.

Iron catalyst chemistry in modeling a high-pressure carbon monoxide nanotube reactor.

PubMed

Scott, Carl D; Povitsky, Alexander; Dateo, Christopher; Gökçen, Tahir; Willis, Peter A; Smalley, Richard E

2003-01-01

The high-pressure carbon monoxide (HiPco) technique for producing single-wall carbon nanotubes (SWNTs) is analyzed with the use of a chemical reaction model coupled with flow properties calculated along streamlines, calculated by the FLUENT code for pure carbon monoxide. Cold iron pentacarbonyl, diluted in CO at about 30 atmospheres, is injected into a conical mixing zone, where hot CO is also introduced via three jets at 30 degrees with respect to the axis. Hot CO decomposes the Fe(CO)5 to release atomic Fe. Then iron nucleates and forms clusters that catalyze the formation of SWNTs by a disproportionation reaction (Boudouard) of CO on Fe-containing clusters. Alternative nucleation rates are estimated from the theory of hard sphere collision dynamics with an activation energy barrier. The rate coefficient for carbon nanotube growth is estimated from activation energies in the literature. The calculated growth was found be about an order of magnitude greater than measured, regardless of the nucleation rate. A study of cluster formation in an incubation zone prior to injection into the reactor shows that direct dimer formation from Fe atoms is not as important as formation via an exchange reaction of Fe with CO in FeCO.

Fenestration system energy performance research, implementation, and international harmonization

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGowan, Raymond F

The research conducted by the NFRC and its contractors adds significantly to the understanding of several areas of investigation. NFRC enables manufacturers to rate fenestration energy performance to comply with building energy codes, participate in ENERGY STAR, and compete fairly. NFRC continuously seeks to improve its ratings and also seeks to simplify the rating process. Several research projects investigated rating improvement potential such as • Complex Product VT Rating Research • Window 6 and Therm 6 Validation Research Project • Complex Product VT Rating Research Conclusions from these research projects led to important changes and increased confidence in the existingmore » NFRC rating process. Conclusions from the Window 6/Therm 6 project will enable window manufacturers to rate an expanded array of products and improve existing ratings. Some research lead to an improved new rating method called the Component Modeling Approach. A primary goal of the CMA was a simplification of the commercial energy rating process to increase participation and make the commercial industry more competitive and code compliant. The project below contributed towards CMA development: • Component Modeling Approach Condensation Resistance Research NFRC continues to implement the Component Modeling Approach program. The program includes the CMA software tool, CMAST, and several procedural documents to govern the certification process. This significant accomplishment was a response the commercial fenestration industry’s need for a simplification of the present NFRC energy rating method (named site built). To date, most commercial fenestration is self-rated by a variety of techniques. The CMA enables commercial fenestration manufacturers to rate according to the NFRC 100/200 as most commercial energy codes require. International Harmonization NFRC achieved significant international harmonization success by continuing its licensing agreements with the Australian Fenestration Rating Council and the Association of Architectural Aluminum Manufacturers of South Africa (AAAMSA) to produce NFRC certified product ratings in their respective nations. NFRC worked in several other nations to introduce the NFRC ratings system: • India • China • Japan • Canada • Thailand • South Africa • Brazil • Korea NFRC attended or hosted several meetings in each of these nations establishing academic, commercial, industrial, and governmental contacts. NFRC presented the NFRC process and then necessary infrastructure steps necessary to achieve harmonization with the NFRC labeling system. NFRC looks forward to continued work toward harmonization in these nations and potentially others.« less

33 CFR 154.1026 - Qualified individual and alternate qualified individual.

Code of Federal Regulations, 2010 CFR

2010-07-01

... alternate must: (1) Be located in the United States; (2) Speak fluent English; (3) Be familiar with the... facility may designate an organization to fulfill the role of the qualified individual and the alternate...

Experimental and numerical simulation of passive decay heat removal by sump cooling after cool melt down

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knebel, J.U.; Kuhn, D.; Mueller, U.

1997-12-01

This article presents the basic physical phenomena and scaling criteria of passive decay heat removal from a large coolant pool by single-phase and two-phase natural circulation. The physical significance of the dimensionless similarity groups derived is evaluated. The above results are applied to the SUCO program that is performed at the Forschungszentrum Karlsruhe. The SUCO program is a three-step series of scaled model experiments investigating the possibility of a sump cooling concept for future light water reactors. The sump cooling concept is based on passive safety features within the containment. The work is supported by the German utilities and themore » Siemens AG. The article gives results of temperature and velocity measurements in the 1:20 linearly scaled SUCOS-2D test facility. The experiments are backed up by numerical calculations using the commercial software package Fluent. Finally, using the similarity analysis from above, the experimental results of the model geometry are scaled-up to the conditions in the prototype, allowing a first statement with regard to the feasibility of the sump cooling concept. 11 refs., 9 figs., 3 tabs.« less

A comparative study on the motion of various objects inside an air tunnel

NASA Astrophysics Data System (ADS)

Shibani, Wanis Mustafa E.; Zulkafli, Mohd Fadhli; Basunoand, Bambang

2017-04-01

This paper presents a comparative study of the movement of various rigid bodies through an air tunnel for both two and three-dimensional flow problems. Three kinds of objects under investigation are in the form of box, ball and wedge shape. The investigation was carried out through the use of a commercial CFD software, named Fluent, in order to determine aerodynamic forces, act on the object as well as to track its movement. Adopted numerical scheme is the time-averaged Navier-Stokes equation with k - ɛ as its turbulence modeling and the scheme was solved using the SIMPLE algorithm. Triangular elements grid was used in 2D case, while tetrahedron elements for 3D case. Grid independence studies were performed for each problem from a coarse to fine grid. The motion of an object is restricted in one direction only and is found by tracking its center of mass at every time step. The result indicates the movement of the object is increasing as the flow moves down stream and the box have the fastest speed compare to the other two shapes for both 2D and 3D cases.

Numerical and experimental investigation of enhancement of heat transfer in dimpled rib heat exchanger tube

NASA Astrophysics Data System (ADS)

Kumar, Anil; Maithani, Rajesh; Suri, Amar Raj Singh

2017-12-01

In this study, numerical and experimental investigation has been carried out for a range of system and operating parameters in order to analyse the effect of dimpled rib on heat and fluid flow behaviours in heat exchanger tube. Tube has, stream wise spacing ( x/ d d ) range of 15-35, span wise spacing ( y/ d d ) range of 15-35, ratio of dimpled depth to print diameter ( e/ d d ) of 1.0 and Reynolds number ( Re n ) ranges from 4000 to 28,000. Simulations were carried out to obtain heat and fluid flow behaviour of smooth and rough tube, using commercial CFD software, ANSYS 16.0 (Fluent). Renormalization k - ɛ model was employed to assess the influence of dimpled on turbulent flow and velocity field. Simulation results show that, the enhancement of 3.18 times in heat transfer and 2.87 times enhancement in thermal hydraulic performance as a function of stream wise direction ( x/ d d ) of 15 and span wise direction ( y/ d d ) of 15 respectively. Comparison between numerical and experimental simulation results showed that good agreement as the data fell within ±10% error band.

Design analysis of vertical wind turbine with airfoil variation

NASA Astrophysics Data System (ADS)

Maulana, Muhammad Ilham; Qaedy, T. Masykur Al; Nawawi, Muhammad

2016-03-01

With an ever increasing electrical energy crisis occurring in the Banda Aceh City, it will be important to investigate alternative methods of generating power in ways different than fossil fuels. In fact, one of the biggest sources of energy in Aceh is wind energy. It can be harnessed not only by big corporations but also by individuals using Vertical Axis Wind Turbines (VAWT). This paper presents a three-dimensional CFD analysis of the influence of airfoil design on performance of a Darrieus-type vertical-axis wind turbine (VAWT). The main objective of this paper is to develop an airfoil design for NACA 63-series vertical axis wind turbine, for average wind velocity 2,5 m/s. To utilize both lift and drag force, some of designs of airfoil are analyzed using a commercial computational fluid dynamics solver such us Fluent. Simulation is performed for this airfoil at different angles of attach rearranging from -12°, -8°, -4°, 0°, 4°, 8°, and 12°. The analysis showed that the significant enhancement in value of lift coefficient for airfoil NACA 63-series is occurred for NACA 63-412.

Wall roughness effect on gas dynamics in supersonic ejector

NASA Astrophysics Data System (ADS)

Aronson, K. E.; Brezgin, D. V.

2016-10-01

The paper presents the numerical simulations results in order to figure out the influence of the wall surface roughness on gas-dynamic processes inside the supersonic ejector. For these purposes two commercial CFD-solvers (Star-CCM+ and Fluent) were used. A detailed comparative study of the built-in tools and approaches in both CFD-packages for evaluation of surface roughness effects on the logarithmic law velocity distribution inside the boundary layer is carried out. Influence of ejector surface roughness is compared with the influence of the backpressure. It is found out that either increasing the backpressure behind the ejector or increasing the surface roughness height, the appearance section of a pressure shock is displaced upstream (closer to the primary nozzle). The numerical simulations results of the ejector with rough walls in both CFD-solvers are well quantitative agreed between each other in terms of the mass flow rates and are well qualitative consistent in terms of the local flow parameters distribution. It is found out that in case of exceeding the "critical roughness height" for the given geometry and boundary conditions, the ejector switches to the "off-design" mode and its performance is significantly reduced.

Modeling of diesel/CNG mixing in a pre-injection chamber

NASA Astrophysics Data System (ADS)

Abdul-Wahhab, H. A.; Aziz, A. R. A.; Al-Kayiem, H. H.; Nasif, M. S.

2015-12-01

Diesel engines performance can be improved by adding combustible gases to the liquid diesel. In this paper, the propagation of a two phase flow liquid-gas fuel mixture into a pre-mixer is investigated numerically by computational fluid dynamics simulation. CNG was injected into the diesel within a cylindrical conduit operates as pre-mixer. Four injection models of Diesel-CNG were simulated using ANSYS-FLUENT commercial software. Two CNG jet diameters were used of 1 and 2 mm and the diesel pipe diameter was 9 mm. Two configurations were considered for the gas injection. In the first the gas was injected from one side while for the second two side entries were used. The CNG to Diesel pressure ratio was varied between 1.5 and 3. The CNG to Diesel mass flow ratios were varied between 0.7 and 0.9. The results demonstrate that using double-sided injection increased the homogeneity of the mixture due to the swirl and acceleration of the mixture. Mass fraction, in both cases, was found to increase as the mixture flows towards the exit. As a result, this enhanced mixing is likely to lead to improvement in the combustion performance.

``Magical'' fluid pathways: inspired airflow corridors for optimal drug delivery to human sinuses

NASA Astrophysics Data System (ADS)

Basu, Saikat; Farzal, Zainab; Kimbell, Julia S.

2017-11-01

Topical delivery methods like nasal sprays are an important therapeutic component for sinusitis (inflammation and clogging of the paranasal sinuses). The sinuses are air-filled sacs, identified as: maxillaries (under the eyes and deep to cheeks bilaterally; largest in volume), frontals (above and medial to the eyes, behind forehead area), ethmoids (between the eyes, inferior to the frontal sinuses), and sphenoids (superior and posterior to ethmoids). We develop anatomic CT-based 3D reconstructions of the human nasal cavity for multiple subjects. Through CFD simulations on Fluent for measured breathing rates, we track inspiratory airflow in all the models and the corresponding sprayed drug transport (for a commercially available sprayer, with experimentally tested particle size distributions). The protocol is implemented for a wide array of spray release points. We make the striking observation that the same release points in each subject provide better particle deposition in all the sinuses, despite the sinuses being located at different portions of the nasal cavity. This leads to the conjecture that the complicated anatomy-based flow physics artifacts in the nasal canal generate certain ``magical'' streamlines, providing passage for improved drug transport to all sinus targets. Supported by NIH Grant R01 HL122154.

Recovery in treated aphasia in the first year post-stroke.

PubMed

Sarno, M T; Levita, E

1979-01-01

During a one year post-stroke period of observation, the recovery trend in treated aphasic patients was characterized by general progression in communication skill. The most notable improvement occurred on a measure of everyday function with changes worthy of note on tasks of auditory comprehension and spontaneous word production. In the first 6 months post-stroke, the greatest gain occurred in aphasic patients classified as Fluent, and the least gain in Global aphasics. On the auditory comprehension task, however, improvement was noted in all aphasics regardless of type. In contrast, during the latter half of the first year post-stroke, Fluent aphasics showed least and Global aphasics the greatest improvement. In spite of their progress, Global aphasic patients remained considerably more impaired than the other groups. That the Global aphasics remained so impaired was expected, but the extent and temporal characteristics of their progress in communicating was unexpected.

Study on cavitation effect of mechanical seals with laser-textured porous surface

NASA Astrophysics Data System (ADS)

Liu, T.; Chen, H. l.; Liu, Y. H.; Wang, Q.; Liu, Z. B.; Hou, D. H.

2012-11-01

Study on the mechanisms underlying generation of hydrodynamic pressure effect associated with laser-textured porous surface on mechanical seal, is the key to seal and lubricant properties. The theory model of mechanical seals with laser-textured porous surface (LES-MS) based on cavitation model was established. The LST-MS was calculated and analyzed by using Fluent software with full cavitation model and non-cavitation model and film thickness was predicted by the dynamic mesh technique. The results indicate that the effect of hydrodynamic pressure and cavitation are the important reasons to generate liquid film opening force on LST-MS; Cavitation effect can enhance hydrodynamic pressure effect of LST-MS; The thickness of liquid film could be well predicted with the method of dynamic mesh technique on Fluent and it becomes larger as the increasing of shaft speed and the decreasing of pressure.

The impact of input quality on early sign development in native and non-native language learners.

PubMed

Lu, Jenny; Jones, Anna; Morgan, Gary

2016-05-01

There is debate about how input variation influences child language. Most deaf children are exposed to a sign language from their non-fluent hearing parents and experience a delay in exposure to accessible language. A small number of children receive language input from their deaf parents who are fluent signers. Thus it is possible to document the impact of quality of input on early sign acquisition. The current study explores the outcomes of differential input in two groups of children aged two to five years: deaf children of hearing parents (DCHP) and deaf children of deaf parents (DCDP). Analysis of child sign language revealed DCDP had a more developed vocabulary and more phonological handshape types compared with DCHP. In naturalistic conversations deaf parents used more sign tokens and more phonological types than hearing parents. Results are discussed in terms of the effects of early input on subsequent language abilities.

Analysis of Blood Flow in a Partially Blocked Bifurcated Blood Vessel

NASA Astrophysics Data System (ADS)

Abdul-Razzak, Hayder; Elkassabgi, Yousri; Punati, Pavan K.; Nasser, Naseer

2009-09-01

Coronary artery disease is a major cause of death in the United States. It is the narrowing of the lumens of the coronary blood vessel by a gradual build-up of fatty material, atheroma, which leads to the heart muscle not receiving enough blood. This my ocardial ischemia can cause angina, a heart attack, heart failure as well as sudden cardiac death [9]. In this project a solid model of bifurcated blood vessel with an asymmetric stenosis is developed using GAMBIT and imported into FLUENT for analysis. In FLUENT, pressure and velocity distributions in the blood vessel are studied under different conditions, where the size and position of the blockage in the blood vessel are varied. The location and size of the blockage in the blood vessel are correlated with the pressures and velocities distributions. Results show that such correlation may be used to predict the size and location of the blockage.

Ansys Fluent versus Sim Vascular for 4-D patient-specific computational hemodynamics in renal arteries

NASA Astrophysics Data System (ADS)

Mumbaraddi, Avinash; Yu, Huidan (Whitney); Sawchuk, Alan; Dalsing, Michael

2015-11-01

The objective of this clinical-need driven research is to investigate the effect of renal artery stenosis (RAS) on the blood flow and wall shear stress in renal arteries through 4-D patient-specific computational hemodynamics (PSCH) and search for possible critical RASs that significantly alter the pressure gradient across the stenosis by manually varying the size of RAS from 50% to 95%. The identification of the critical RAS is important to understand the contribution of RAS to the overall renal resistance thus appropriate clinical therapy can be determined in order to reduce the hypertension. Clinical CT angiographic data together with Doppler Ultra sound images of an anonymous patient are used serving as the required inputs of the PSCH. To validate the PSCH, we use both Ansys Fluent and Sim Vascular and compare velocity, pressure, and wall-shear stress under identical conditions. Renal Imaging Technology Development Program (RITDP) Grant.

Lexical-semantic processing in the semantic priming paradigm in aphasic patients.

PubMed

Salles, Jerusa Fumagalli de; Holderbaum, Candice Steffen; Parente, Maria Alice Mattos Pimenta; Mansur, Letícia Lessa; Ansaldo, Ana Inès

2012-09-01

There is evidence that the explicit lexical-semantic processing deficits which characterize aphasia may be observed in the absence of implicit semantic impairment. The aim of this article was to critically review the international literature on lexical-semantic processing in aphasia, as tested through the semantic priming paradigm. Specifically, this review focused on aphasia and lexical-semantic processing, the methodological strengths and weaknesses of the semantic paradigms used, and recent evidence from neuroimaging studies on lexical-semantic processing. Furthermore, evidence on dissociations between implicit and explicit lexical-semantic processing reported in the literature will be discussed and interpreted by referring to functional neuroimaging evidence from healthy populations. There is evidence that semantic priming effects can be found both in fluent and in non-fluent aphasias, and that these effects are related to an extensive network which includes the temporal lobe, the pre-frontal cortex, the left frontal gyrus, the left temporal gyrus and the cingulated cortex.