76 FR 21847 - Defense Federal Acquisition Regulation Supplement (DFARS), Alternative Line-Item Structure (DFARS...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-19

... cause of failures in the electronic processes of the DoD's business enterprise requiring manual... structure that reflects the offeror's business practices for selling and billing commercial items and... sufficient for delivery, payment, and subsequent inventory management of the items delivered. For example...

A Different Perspective: How Much Innovation Is Really Needed for Monoclonal Antibody Production Using Mammalian Cell Technology?

PubMed

Kelley, Brian; Kiss, Robert; Laird, Michael

2018-05-03

As biopharmaceutical companies have optimized cell line and production culture process development, titers of recombinant antibodies have risen steadily to 3-8 g/L for fed-batch mammalian cultures at production scales of 10 kL or larger. Most new antibody products are produced from Chinese Hamster Ovary (CHO) cell lines, and there are relatively few alternative production hosts under active evaluation. Many companies have adopted a strategy of using the same production cell line for early clinical phases as well as commercial production, which reduces the risk of product comparability issues during the development lifecycle. Product quality and consistency expectations rest on the platform knowledge of the CHO host cell line and processes used for the production of many licensed antibodies. The lack of impact of low-level product variants common to this platform on product safety and efficacy also builds on the established commercial history of recombinant antibodies, which dates back to 1997.Efforts to increase titers further will likely yield diminishing returns. Very few products would benefit significantly from a titer greater than 8 g/L; in many cases, a downstream processing bottleneck would preclude full recovery from production-scale bioreactors for high titer processes. The benefits of a process platform based on standard fed-batch production culture include predictable scale-up, process transfer, and production within a company's manufacturing network or at a contract manufacturing organization. Furthermore, the confidence in an established platform provides key support towards regulatory flexibility (e.g., design space) for license applications following a quality-by-design strategy.These factors suggest that novel technologies for antibody production may not provide a substantial return on investment. What, then, should be the focus of future process development efforts for companies that choose to launch antibody products using their current platform? This review proposes key focus areas in an effort to continually improve process consistency, assure acceptable product quality, and establish appropriate process parameter limits to enable flexible manufacturing options.

12 CFR Appendix A to Part 193 - Financial Statement Line Items

Code of Federal Regulations, 2013 CFR

2013-01-01

..., (ii) commercial paper, and (iii) other short-term borrowings. (b) Federal funds purchased and sales of... financial statements. The amount of these lines of credit which support a commercial paper borrowing..., including Federal funds purchased, securities sold under agreements to repurchase, commercial paper, and...

The role of ethics in commercial genetic research: notes on the notion of commodification.

PubMed

Hoeyer, Klaus

2005-01-01

The emergence of exchange systems for new bodily entities such as organs, cell lines, and tissue samples has generated increasing ethical concern. Concurrently, the role of ethics is becoming contested. Some social scientists have sought to reveal ethics policies as veils for commercial exploitation, masking the crude commodification of the human body. Other social scientists and ethicists have attempted to carve out a role for ethics as a defense against such, presumably violent, market forces. This article seeks an alternative rout. In analyzing the commercialization of a particular Swedish biobank, it suggests that we are in fact witnessing a process of decommodification and that ethics policies do indeed play a central role in this. However, concomitantly, ethics can be seen to veil the commodification not of bodily entities but, rather, of research results. When approaching these processes it is suggested that we analyze the interrelatedness of moral reasoning and forms of exchange.

Simulation modeling of high-throughput cryopreservation of aquatic germplasm: a case study of blue catfish sperm processing

PubMed Central

Hu, E; Liao, T. W.; Tiersch, T. R.

2013-01-01

Emerging commercial-level technology for aquatic sperm cryopreservation has not been modeled by computer simulation. Commercially available software (ARENA, Rockwell Automation, Inc. Milwaukee, WI) was applied to simulate high-throughput sperm cryopreservation of blue catfish (Ictalurus furcatus) based on existing processing capabilities. The goal was to develop a simulation model suitable for production planning and decision making. The objectives were to: 1) predict the maximum output for 8-hr workday; 2) analyze the bottlenecks within the process, and 3) estimate operational costs when run for daily maximum output. High-throughput cryopreservation was divided into six major steps modeled with time, resources and logic structures. The modeled production processed 18 fish and produced 1164 ± 33 (mean ± SD) 0.5-ml straws containing one billion cryopreserved sperm. Two such production lines could support all hybrid catfish production in the US and 15 such lines could support the entire channel catfish industry if it were to adopt artificial spawning techniques. Evaluations were made to improve efficiency, such as increasing scale, optimizing resources, and eliminating underutilized equipment. This model can serve as a template for other aquatic species and assist decision making in industrial application of aquatic germplasm in aquaculture, stock enhancement, conservation, and biomedical model fishes. PMID:25580079

Measure of mechanical impacts in commercial blueberry packing lines and potential damage to blueberry fruit

USDA-ARS?s Scientific Manuscript database

Modern blueberry packing lines create impact damage to blueberries which will result in fruit bruising. In this study, impacts created by commercial blueberry packing lines were measured quantitatively using a miniature instrumented sphere. Impacts were recorded at transfer points. Average peakG ...

Laser metrology in food-related systems

NASA Astrophysics Data System (ADS)

Mendoza-Sanchez, Patricia; Lopez, Daniel; Kongraksawech, Teepakorn; Vazquez, Pedro; Torres, J. Antonio; Ramirez, Jose A.; Huerta-Ruelas, Jorge

2005-02-01

An optical system was developed using a low-cost semiconductor laser and commercial optical and electronic components, to monitor food processes by measuring changes in optical rotation (OR) of chiral compounds. The OR signal as a function of processing time and sample temperature were collected and recorded using a computer data acquisition system. System has been tested during two different processes: sugar-protein interaction and, beer fermentation process. To study sugar-protein interaction, the following sugars were used: sorbitol, trehalose and sucrose, and in the place of Protein, Serum Albumin Bovine (BSA, A-7906 Sigma-Aldrich). In some food processes, different sugars are added to protect damage of proteins during their processing, storage and/or distribution. Different sugar/protein solutions were prepared and heated above critical temperature of protein denaturation. OR measurements were performed during heating process and effect of different sugars in protein denaturation was measured. Higher sensitivity of these measurements was found compared with Differential Scanning Calorimetry, which needs higher protein concentration to study these interactions. The brewing fermentation process was monitored in-situ using this OR system and validated by correlation with specific density measurements and gas chromatography. This instrument can be implemented to monitor fermentation on-line, thereby determining end of process and optimizing process conditions in an industrial setting. The high sensitivity of developed OR system has no mobile parts and is more flexible than commercial polarimeters providing the capability of implementation in harsh environments, signifying the potential of this method as an in-line technique for quality control in food processing and for experimentation with optically active solutions.

Technical Evaluation for the Determination of CGI Designation for Safety Class Items Incorporated in Hose-in-Hose Transfer Line Assemblies

DOE Office of Scientific and Technical Information (OSTI.GOV)

BUCHANAN, J.R.

2000-05-16

The purpose of this technical evaluation is to determine whether the secondary hoses are to be categorized as Commercial Grade Items (CGI) or Engineered Equipment. This determination will identify whether or not use of the CGI Dedication process is appropriate.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, T.D.

Sandia National Laboratories, Albuquerque (SNLA), is currently conducting a program to predict the performance and measure the characteristics of commercially available solar collectors that have the potential for use in industrial process heat and enhance oil recovery applications. The thermal performance predictions for the AAI solar line-focusing slat-type collector for five cities in the US are presented. (WHK)

77 FR 48934 - Endangered and Threatened Wildlife and Plants; 90-Day Finding on a Petition To List the Bicknell...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-15

... resulting from the construction and operation of commercial wind turbines and transmission lines in breeding habitat, including habitat loss, mortality, productivity, and avoidance of turbines as a result of blade...) and natural processes. Natural disturbances include `terrific' winds, which can exceed 45 meters per...

Studies on Hot-Melt Prepregging on PRM-II-50 Polyimide Resin with Graphite Fibers

NASA Technical Reports Server (NTRS)

Shin, E. Eugene; Sutter, James K.; Juhas, John; Veverka, Adrienne; Klans, Ojars; Inghram, Linda; Scheiman, Dan; Papadopoulos, Demetrios; Zoha, John; Bubnick, Jim

2004-01-01

A second generation PMR (in situ Polymerization of Monomer Reactants) polyimide resin PMR-II-50, has been considered for high temperature and high stiffness space propulsion composites applications for its improved high temperature performance. As part of composite processing optimization, two commercial prepregging methods: solution vs. hot-melt processes were investigated with M40J fabrics from Toray. In a previous study a systematic chemical, physical, thermal and mechanical characterization of these composites indicated the poor resin-fiber interfacial wetting, especially for the hot-melt process, resulted in poor composite quality. In order to improve the interfacial wetting, optimization of the resin viscosity and process variables were attempted in a commercial hot-melt prepregging line. In addition to presenting the results from the prepreg quality optimization trials, the combined effects of the prepregging method and two different composite cure methods, i.e. hot press vs. autoclave on composite quality and properties are discussed.

Studies on Hot-Melt Prepregging of PMR-II-50 Polyimide Resin with Graphite Fibers

NASA Technical Reports Server (NTRS)

Shin, E. Eugene; Sutter, James K.; Juhas, John; Veverka, Adrienne; Klans, Ojars; Inghram, Linda; Scheiman, Dan; Papadopoulos, Demetrios; Zoha, John; Bubnick, Jim

2003-01-01

A Second generation PMR (in situ Polymerization of Monomer Reactants) polyimide resin, PMR-II-50, has been considered for high temperature and high stiffness space propulsion composites applications for its improved high temperature performance. As part of composite processing optimization, two commercial prepregging methods: solution vs. hot-melt processes were investigated with M40J fabrics from Toray. In a previous study a systematic chemical, physical, thermal and mechanical characterization of these composites indicated that poor resin-fiber interfacial wetting, especially for the hot-melt process, resulted in poor composite quality. In order to improve the interfacial wetting, optimization of the resin viscosity and process variables were attempted in a commercial hot-melt prepregging line. In addition to presenting the results from the prepreg quality optimization trials, the combined effects of the prepregging method and two different composite cure methods, i.e., hot press vs. autoclave on composite quality and properties are discussed.

Improving the efficiency of CHO cell line generation using glutamine synthetase gene knockout cells.

PubMed

Fan, Lianchun; Kadura, Ibrahim; Krebs, Lara E; Hatfield, Christopher C; Shaw, Margaret M; Frye, Christopher C

2012-04-01

Although Chinese hamster ovary (CHO) cells, with their unique characteristics, have become a major workhorse for the manufacture of therapeutic recombinant proteins, one of the major challenges in CHO cell line generation (CLG) is how to efficiently identify those rare, high-producing clones among a large population of low- and non-productive clones. It is not unusual that several hundred individual clones need to be screened for the identification of a commercial clonal cell line with acceptable productivity and growth profile making the cell line appropriate for commercial application. This inefficiency makes the process of CLG both time consuming and laborious. Currently, there are two main CHO expression systems, dihydrofolate reductase (DHFR)-based methotrexate (MTX) selection and glutamine synthetase (GS)-based methionine sulfoximine (MSX) selection, that have been in wide industrial use. Since selection of recombinant cell lines in the GS-CHO system is based on the balance between the expression of the GS gene introduced by the expression plasmid and the addition of the GS inhibitor, L-MSX, the expression of GS from the endogenous GS gene in parental CHOK1SV cells will likely interfere with the selection process. To study endogenous GS expression's potential impact on selection efficiency, GS-knockout CHOK1SV cell lines were generated using the zinc finger nuclease (ZFN) technology designed to specifically target the endogenous CHO GS gene. The high efficiency (∼2%) of bi-allelic modification on the CHO GS gene supports the unique advantages of the ZFN technology, especially in CHO cells. GS enzyme function disruption was confirmed by the observation of glutamine-dependent growth of all GS-knockout cell lines. Full evaluation of the GS-knockout cell lines in a standard industrial cell culture process was performed. Bulk culture productivity improved two- to three-fold through the use of GS-knockout cells as parent cells. The selection stringency was significantly increased, as indicated by the large reduction of non-producing and low-producing cells after 25 µM L-MSX selection, and resulted in a six-fold efficiency improvement in identifying similar numbers of high-productive cell lines for a given recombinant monoclonal antibody. The potential impact of GS-knockout cells on recombinant protein quality is also discussed. Copyright © 2011 Wiley Periodicals, Inc.

How Digital Image Processing Became Really Easy

NASA Astrophysics Data System (ADS)

Cannon, Michael

1988-02-01

In the early and mid-1970s, digital image processing was the subject of intense university and corporate research. The research lay along two lines: (1) developing mathematical techniques for improving the appearance of or analyzing the contents of images represented in digital form, and (2) creating cost-effective hardware to carry out these techniques. The research has been very effective, as evidenced by the continued decline of image processing as a research topic, and the rapid increase of commercial companies to market digital image processing software and hardware.

Commercialization in College Sports May Have "Crossed the Line," Report Says

ERIC Educational Resources Information Center

Wolverton, Brad

2009-01-01

Big-time college sports programs derive 60 percent to 80 percent of their revenue from commercial sources, suggesting that intercollegiate athletics--at least at the elite levels--may have "crossed the line" from an educational to a commercial endeavor. That finding comes from a report, "Tax Preferences for Collegiate Sports," released last week…

Recombinase-mediated cassette exchange (RMCE) for monoclonal antibody expression in the commercially relevant CHOK1SV cell line.

PubMed

Zhang, Lin; Inniss, Mara C; Han, Shu; Moffat, Mark; Jones, Heather; Zhang, Baohong; Cox, Wendy L; Rance, James R; Young, Robert J

2015-01-01

To meet product quality and cost parameters for therapeutic monoclonal antibody (mAb) production, cell lines are required to have excellent growth, stability, and productivity characteristics. In particular, cell line generation stability is critical to the success of a program, especially where high cell line generation numbers are required for large in-market supply. However, a typical process for developing such cell lines is laborious, lengthy, and costly. In this study, we applied a FLP/FRT recombinase-mediated cassette exchange (RMCE) system to build a site-specific integration (SSI) system for mAb expression in the commercially relevant CHOK1SV cell line. Using a vector with a FRT-flanked mAb expression cassette, we generated a clonal cell line with good productivity, long-term production stability, and low mAb gene-copy number indicating the vector was located in a 'hot-spot.' A SSI host cell line was made by removing the mAb genes from the 'hot-spot' by RMCE, creating a 'landing pad' containing two recombination cassettes that allow targeting of one or two copies of recombinant genes. Cell lines made from this host exhibited excellent growth and productivity profiles, and stability for at least 100 generations in the absence of selection agents. Importantly, while clones containing two copies had higher productivity than single copy clones, both were stable over many generations. Taken together, this study suggests the use of FLP-based RMCE to develop SSI host cells for mAb production in CHOK1SV offers significant savings in both resources and overall cell line development time, leading to a shortened 'time-to-clinic' for therapeutic mAbs. © 2015 American Institute of Chemical Engineers.

Building a base map with AutoCAD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flarity, S.J.

1989-12-01

The fundamental step in the exploration process is building a base map. Consequently, any serious computer exploration program should be capable of providing base maps. Data used in constructing base maps are available from commercial sources such as Tobin. and Petroleum Information. These data sets include line and well data, the line data being latitude longitude vectors, and the ell data any identifying text information for well and their locations. AutoCAD is a commercial program useful in building base maps. Its features include infinite zoom and pan capability, layering, block definition, text dialog boxes, and a command language, AutoLisp. AutoLispmore » provides more power by allowing the geologist to modify the way the program works. Three AutoLisp routines presented here allow geologists to construct a geologic base map from raw Tobin data. The first program, WELLS.LSP, sets up the map environment for the subsequent programs, WELLADD.LSP and LINEADD.LSP. Welladd.lisp reads the Tobin data and spots the well symbols and the identifying information. Lineadd.lsp performs the same task on line and textural information contained within the data set.« less

Lithographic performance of recent DUV photoresists

NASA Astrophysics Data System (ADS)

Streefkerk, Bob; van Ingen Schenau, Koen; Buijk, Corine

1998-06-01

Commercially available photoresists from the major photoresist vendors are investigated using a PAS 5500/300 wafer stepper, a 31.1 mm diameter field size high throughput wafer stepper with variable NA capability up to 0.63. The critical dimension (CD) investigated is 0.25 micrometers and lower for dense and isolated lines and 0.25 micrometers for dense contact holes. The photoresist process performance is quantified by measuring exposure-defocus windows for a specific resolution using a CD SEM. Photoresists that are comparable with or better than APEX-E with RTC top coat, which is the current base line process for lines and spaces imaging performance, are Clariant AZ-DX1300 and Shin Etsu SEPR-4103PB50. Most recent photoresists have much improved delay performance when compared to APEX without top coat. Improvement, when an organic BARC is applied, depends on the actual photoresist characteristics. The optimal photoresist found for 0.25 micrometers contact holes is TOK DP015 C. This process operates at optimal conditions.

Clinical and pathological responses of pigs from two genetically diverse commercial lines to porcine respiratory and reproductive syndrome virus infection

USDA-ARS?s Scientific Manuscript database

The response to infection from porcine reproductive and respiratory syndrome virus (PRRSV) for two genetically diverse commercial pig lines was investigated. Seventy two pigs from each line, aged 6 weeks, were challenged with PRRSV VR-2385, and 66 littermates served as control. The clinical response...

Marination effects on water states and water-holding capacity of broiler pectoralis major muscle with different color lightness

USDA-ARS?s Scientific Manuscript database

Experiments were carried out to investigate the effect of marination on water states and water-holding capacity (WHC) of broiler pectoralis (p.) major muscle. Boneless, skinless p. major were collected 6-8 h postmortem from deboning lines at a commercial processing plant, and separated into light, ...

Assembly line plants take root

DOE Office of Scientific and Technical Information (OSTI.GOV)

Comis, D.; Wood, M.

This paper discussed tissue-culture propagation of sugarcane, apple trees, peach trees, citrus, orchids, data palms, and carrots. Tissue-culture propagation is a term used for a variety of techniques used to grow or genetically modify, preserve, or study plant parts in laboratories, from tissue or even a single cell. The author examined the benefits and commercial applications of this propagation process.

Comparison of DNQ/novolac resists for e-beam exposure

NASA Astrophysics Data System (ADS)

Fedynyshyn, Theodore H.; Doran, Scott P.; Lind, Michele L.; Lyszczarz, Theodore M.; DiNatale, William F.; Lennon, Donna; Sauer, Charles A.; Meute, Jeff

1999-12-01

We have surveyed the commercial resist market with the dual purpose of identifying diazoquinone/novolac based resists that have potential for use as e-beam mask making resists and baselining these resists for comparison against future mask making resist candidates. For completeness, this survey would require that each resist be compared with an optimized developer and development process. To accomplish this task in an acceptable time period, e-beam lithography modeling was employed to quickly identify the resist and developer combinations that lead to superior resist performance. We describe the verification of a method to quickly screen commercial i-line resists with different developers, by determining modeling parameters for i-line resists from e-beam exposures, modeling the resist performance, and comparing predicted performance versus actual performance. We determined the lithographic performance of several DNQ/novolac resists whose modeled performance suggests that sensitivities of less than 40 (mu) C/cm2 coupled with less than 10-nm CD change per percent change in dose are possible for target 600-nm features. This was accomplished by performing a series of statistically designed experiments on the leading resists candidates to optimize processing variables, followed by comparing experimentally determined resist sensitivities, latitudes, and profiles of the DNQ/novolac resists a their optimized process.

Industrial Raman gas sensing for real-time system control

NASA Astrophysics Data System (ADS)

Buric, M.; Mullen, J.; Chorpening, B.; Woodruff, S.

2014-06-01

Opportunities exist to improve on-line process control in energy applications with a fast, non-destructive measurement of gas composition. Here, we demonstrate a Raman sensing system which is capable of reporting the concentrations of numerous species simultaneously with sub-percent accuracy and sampling times below one-second for process control applications in energy or chemical production. The sensor is based upon a hollow-core capillary waveguide with a 300 micron bore with reflective thin-film metal and dielectric linings. The effect of using such a waveguide in a Raman process is to integrate Raman photons along the length of the sample-filled waveguide, thus permitting the acquisition of very large Raman signals for low-density gases in a short time. The resultant integrated Raman signals can then be used for quick and accurate analysis of a gaseous mixture. The sensor is currently being tested for energy applications such as coal gasification, turbine control, well-head monitoring for exploration or production, and non-conventional gas utilization. In conjunction with an ongoing commercialization effort, the researchers have recently completed two prototype instruments suitable for hazardous area operation and testing. Here, we report pre-commercialization testing of those field prototypes for control applications in gasification or similar processes. Results will be discussed with respect to accuracy, calibration requirements, gas sampling techniques, and possible control strategies of industrial significance.

77 FR 61295 - Snapper-Grouper Fishery off the Southern Atlantic States; Snapper-Grouper Management Measures

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

...), gutted weight, to ensure that the hook-and-line component of the commercial sector has the opportunity to... hook-and-line quota is not met by September 1, boats with longline endorsements should be able to participate in the hook-and-line component of the commercial sector, using bandit reels, under a 500 lb (227...

Applications of recombinant Pichia pastoris in the healthcare industry.

PubMed

Weinacker, Daniel; Rabert, Claudia; Zepeda, Andrea B; Figueroa, Carolina A; Pessoa, Adalberto; Farías, Jorge G

2013-12-01

Since the 1970s, the establishment and development of the biotech industry has improved exponentially, allowing the commercial production of biopharmaceutical proteins. Nowadays, new recombinant protein production is considered a multibillion-dollar market, in which about 25% of commercial pharmaceuticals are biopharmaceuticals. But to achieve a competitive production process is not an easy task. Any production process has to be highly productive, efficient and economic. Despite that the perfect host is still not discovered, several research groups have chosen Pichia pastoris as expression system for the production of their protein because of its many features. The attempt of this review is to embrace several research lines that have adopted Pichia pastoris as their expression system to produce a protein on an industrial scale in the health care industry.

Applications of recombinant Pichia pastoris in the healthcare industry

PubMed Central

Weinacker, Daniel; Rabert, Claudia; Zepeda, Andrea B.; Figueroa, Carolina A.; Pessoa, Adalberto; Farías, Jorge G.

2013-01-01

Since the 1970s, the establishment and development of the biotech industry has improved exponentially, allowing the commercial production of biopharmaceutical proteins. Nowadays, new recombinant protein production is considered a multibillion-dollar market, in which about 25% of commercial pharmaceuticals are biopharmaceuticals. But to achieve a competitive production process is not an easy task. Any production process has to be highly productive, efficient and economic. Despite that the perfect host is still not discovered, several research groups have chosen Pichia pastoris as expression system for the production of their protein because of its many features. The attempt of this review is to embrace several research lines that have adopted Pichia pastoris as their expression system to produce a protein on an industrial scale in the health care industry. PMID:24688491

Implementation of quality by design toward processing of food products.

PubMed

Rathore, Anurag S; Kapoor, Gautam

2017-05-28

Quality by design (QbD) is a systematic approach that begins with predefined objectives and emphasizes product and process understanding and process control. It is an approach based on principles of sound science and quality risk management. As the food processing industry continues to embrace the idea of in-line, online, and/or at-line sensors and real-time characterization for process monitoring and control, the existing gaps with regard to our ability to monitor multiple parameters/variables associated with the manufacturing process will be alleviated over time. Investments made for development of tools and approaches that facilitate high-throughput analytical and process development, process analytical technology, design of experiments, risk analysis, knowledge management, and enhancement of process/product understanding would pave way for operational and economic benefits later in the commercialization process and across other product pipelines. This article aims to achieve two major objectives. First, to review the progress that has been made in the recent years on the topic of QbD implementation in processing of food products and second, present a case study that illustrates benefits of such QbD implementation.

Moving research to patient applications through commercialization: understanding and evaluating the role of intellectual property.

PubMed

Patino, Robert M

2010-03-01

The advancement of research from discovery to the delivery of medical care can be limited without the support of industry to sponsor its continued development. Federal government financial support is generally crucial in early-stage development through funding from the NIH, National Science Foundation, and other federal agencies; however, government support generally stops shortly after basic research discoveries have been reported. Much of the cessation of financial support derives from the government's regulatory responsibilities, as sponsoring the commercialization of a product conflicts with regulation of the approval for clinical use of a drug or device. Furthermore, differences in goals, resources, and flexibility render government, as compared with private industry, inefficient and less responsive to market demands with regard to stream-lining the development of and enhancing the quality of products and services offered. Thus, industry and private investment provide the bridge that converts new discoveries into healthcare products that are available to consumers and patients. This conversion occurs through commercialization, which involves both high risks and high rewards. Taking advantage of the commercialization option for research development requires an understanding of the technology transfer process. This article reviews 5 topics: 1) industry motivation to invest in academic research; 2) institutional considerations in partnering with industry; 3) academia's interactions with inventors in the commercialization process; 4) the research institution's route to commercialization, and 5) the role of intellectual property and commercialization in the advancement of healthcare.

Moving Research to Patient Applications through Commercialization: Understanding and Evaluating the Role of Intellectual Property

PubMed Central

2010-01-01

The advancement of research from discovery to the delivery of medical care can be limited without the support of industry to sponsor its continued development. Federal government financial support is generally crucial in early-stage development through funding from the NIH, National Science Foundation, and other federal agencies; however, government support generally stops shortly after basic research discoveries have been reported. Much of the cessation of financial support derives from the government's regulatory responsibilities, as sponsoring the commercialization of a product conflicts with regulation of the approval for clinical use of a drug or device. Furthermore, differences in goals, resources, and flexibility render government, as compared with private industry, inefficient and less responsive to market demands with regard to stream-lining the development of and enhancing the quality of products and services offered. Thus, industry and private investment provide the bridge that converts new discoveries into healthcare products that are available to consumers and patients. This conversion occurs through commercialization, which involves both high risks and high rewards. Taking advantage of the commercialization option for research development requires an understanding of the technology transfer process. This article reviews 5 topics: 1) industry motivation to invest in academic research; 2) institutional considerations in partnering with industry; 3) academia's interactions with inventors in the commercialization process; 4) the research institution's route to commercialization, and 5) the role of intellectual property and commercialization in the advancement of healthcare. PMID:20353687

Application of EPR spectroscopy to the examination of pro-oxidant activity of coffee.

PubMed

Krakowian, Daniel; Skiba, Dominik; Kudelski, Adam; Pilawa, Barbara; Ramos, Paweł; Adamczyk, Jakub; Pawłowska-Góral, Katarzyna

2014-05-15

Free radicals present in coffee may be responsible for exerting toxic effects on an organism. The objectives of this work were to compare free radicals properties and concentrations in different commercially available coffees, in solid and liquid states, and to determine the effect of roasting on the formation of free radicals in coffee beans of various origins. The free radicals content of 15 commercially available coffees (solid and liquid) was compared and the impact of processing examined using electron paramagnetic resonance (EPR) spectroscopy at X-band (9.3 GHz). First derivative EPR spectra were measured at microwave power in the range of 0.7-70 mW. The following parameters were calculated for EPR spectra: amplitude (A), integral intensity (I), and line-width (ΔBpp); g-Factor was obtained from resonance condition. Our study showed that free radicals exist in green coffee beans (10(16) spin/g), roasted coffee beans (10(18) spin/g), and in commercially available coffee (10(17)-10(18) spin/g). Free radical concentrations were higher in solid ground coffee than in instant or lyophilised coffee. Continuous microwave saturation indicated homogeneous broadening of EPR lines from solid and liquid commercial coffee samples as well as green and roasted coffee beans. Slow spin-lattice relaxation processes were found to be present in all coffee samples tested, solid and liquid commercial coffees as well as green and roasted coffee beans. Higher free radicals concentrations were obtained for both the green and roasted at 240 °C coffee beans from Peru compared with those originating from Ethiopia, Brazil, India, or Colombia. Moreover, more free radicals occurred in Arabica coffee beans roasted at 240 °C than Robusta. EPR spectroscopy is a useful method of examining free radicals in different types of coffee. Copyright © 2013 Elsevier Ltd. All rights reserved.

The genetics of feed conversion efficiency traits in a commercial broiler line

PubMed Central

Reyer, Henry; Hawken, Rachel; Murani, Eduard; Ponsuksili, Siriluck; Wimmers, Klaus

2015-01-01

Individual feed conversion efficiency (FCE) is a major trait that influences the usage of energy resources and the ecological footprint of livestock production. The underlying biological processes of FCE are complex and are influenced by factors as diverse as climate, feed properties, gut microbiota, and individual genetic predisposition. To gain an insight to the genetic relationships with FCE traits and to contribute to the improvement of FCE in commercial chicken lines, a genome-wide association study was conducted using a commercial broiler population (n = 859) tested for FCE and weight traits during the finisher period from 39 to 46 days of age. Both single-marker (generalized linear model) and multi-marker (Bayesian approach) analyses were applied to the dataset to detect genes associated with the variability in FCE. The separate analyses revealed 22 quantitative trait loci (QTL) regions on 13 different chromosomes; the integration of both approaches resulted in 7 overlapping QTL regions. The analyses pointed to acylglycerol kinase (AGK) and general transcription factor 2-I (GTF2I) as positional and functional candidate genes. Non-synonymous polymorphisms of both candidate genes revealed evidence for a functional importance of these genes by influencing different biological aspects of FCE. PMID:26552583

Recombinant human albumin supports single cell cloning of CHO cells in chemically defined media.

PubMed

Zhu, Jiang; Wooh, Jong Wei; Hou, Jeff Jia Cheng; Hughes, Benjamin S; Gray, Peter P; Munro, Trent P

2012-01-01

Biologic drugs, such as monoclonal antibodies, are commonly made using mammalian cells in culture. The cell lines used for manufacturing should ideally be clonal, meaning derived from a single cell, which represents a technically challenging process. Fetal bovine serum is often used to support low cell density cultures, however, from a regulatory perspective, it is preferable to avoid animal-derived components to increase process consistency and reduce the risk of contamination from adventitious agents. Chinese hamster ovary (CHO) cells are the most widely used cell line in industry and a large number of serum-free, protein-free, and fully chemically defined growth media are commercially available, although these media alone do not readily support efficient single cell cloning. In this work, we have developed a simple, fully defined, single-cell cloning media, specifically for CHO cells, using commercially available reagents. Our results show that a 1:1 mixture of CD-CHO™ and DMEM/F12 supplemented with 1.5 g/L of recombinant albumin (Albucult®) supports single cell cloning. This formulation can support recovery of single cells in 43% of cultures compared to 62% in the presence of serum. Copyright © 2012 American Institute of Chemical Engineers (AIChE).

Dispersal of micro-organisms in commercial defeathering systems.

PubMed

Allen, V M; Tinker, D B; Hinton, M H; Wathes, C M

2003-03-01

1. The extent of cross contamination between carcases and the dispersal of micro-organisms to the environs during defeathering was measured in a commercial processing plant. 2. Defeathering reduced the numbers of a marker organism, a nalidixic acid-resistant strain of Escherichia coli K12, on inoculated carcases but dispersed the organism on to preceding and following carcases. 3. The pattern of microbial dispersal during defeathering was similar for naturally occurring bacteria on the carcase, for example, total aerobic counts and counts of presumptive coliforms, suggesting that the marker organism mimics the natural situation realistically. 4. The majority of feathers, together with micro-organisms, were removed during the first 10 s of the defeathering process, which was completed in 45 s, indicating that control measures to minimise cross contamination would be most effective if applied in the early stages of the process. 5. The method of defeathering used by the machine influenced the pattern of microbial dispersal and the extent of cross contamination to other carcases on the same processing line.

Reciprocal Translocation Observed in End-of-Production Cells of a Commercial CHO-Based Process.

PubMed

Rouiller, Yolande; Kleuser, Beate; Toso, Emiliano; Palinksy, Wolf; Rossi, Mara; Rossatto, Paola; Barberio, Davide; Broly, Hervé

2015-01-01

During the validation of an additional working cell bank derived from a validated master cell bank to support the commercial production continuum of a recombinant protein, we observed an unexpected chromosomal location of the gene of interest in some end-of-production cells. This event-identified by fluorescence in situ hybridization and multicolour chromosome painting as a reciprocal translocation involving a chromosome region containing the gene of interest with its integral coding and flanking sequences-was unique, occurred probably during or prior to multicolour chromosome painting establishment, and was transmitted to the descending generations. Cells bearing the translocation had a transient and process-independent selective advantage, which did not affect process performance and product quality. However, this first report of a translocation affecting the gene of interest location in Chinese Hamster Ovary cells used for producing a biotherapeutic indicates the importance of the demonstration of the integrity of the gene of interest in end-of-production cells. The expression of recombinant therapeutic proteins in mammalian cells depends on the establishment of a cell line with the gene of interest integrated in the host genome and stably expressed over time. Before being used for commercial production, cell lines are submitted to a qualification program in order to ensure their phenotypic and genotypic characteristics and the efficacy and safety of the product. During the production life cycle of a therapeutic protein, additional cells banks have to be validated after exhaustion of the current qualified cell bank in order to support the commercial production continuum of the recombinant protein. It is during the validation of an additional working cell bank derived from a validated master cell bank that we detected a different chromosome bearing the gene of interest in a portion of cells at the end of the upstream production phase. In our case, this event did not affect the process performance, the product quality, or its safety profile, but it highlights the need to characterize the integrity of the gene of interest in end-of-production cells when producing recombinant proteins for human use. © PDA, Inc. 2015.

Establishing Substantial Equivalence: Transcriptomics

NASA Astrophysics Data System (ADS)

Baudo, María Marcela; Powers, Stephen J.; Mitchell, Rowan A. C.; Shewry, Peter R.

Regulatory authorities in Western Europe require transgenic crops to be substantially equivalent to conventionally bred forms if they are to be approved for commercial production. One way to establish substantial equivalence is to compare the transcript profiles of developing grain and other tissues of transgenic and conventionally bred lines, in order to identify any unintended effects of the transformation process. We present detailed protocols for transcriptomic comparisons of developing wheat grain and leaf material, and illustrate their use by reference to our own studies of lines transformed to express additional gluten protein genes controlled by their own endosperm-specific promoters. The results show that the transgenes present in these lines (which included those encoding marker genes) did not have any significant unpredicted effects on the expression of endogenous genes and that the transgenic plants were therefore substantially equivalent to the corresponding parental lines.

Method for verification of constituents of a process stream just as they go through an inlet of a reaction vessel

DOEpatents

Baylor, Lewis C.; Buchanan, Bruce R.; O'Rourke, Patrick E.

1995-01-01

A method for validating a process stream for the presence or absence of a substance of interest such as a chemical warfare agent; that is, for verifying that a chemical warfare agent is present in an input line for feeding the agent into a reaction vessel for destruction, or, in a facility for producing commercial chemical products, that a constituent of the chemical warfare agent has not been substituted for the proper chemical compound. The method includes the steps of transmitting light through a sensor positioned in the feed line just before the chemical constituent in the input line enters the reaction vessel, measuring an optical spectrum of the chemical constituent from the light beam transmitted through it, and comparing the measured spectrum to a reference spectrum of the chemical agent and preferably also reference spectra of surrogates. A signal is given if the chemical agent is not entering a reaction vessel for destruction, or if a constituent of a chemical agent is added to a feed line in substitution of the proper chemical compound.

Method for verification of constituents of a process stream

DOEpatents

Baylor, L.C.; Buchanan, B.R.; O`Rourke, P.E.

1993-01-01

This invention is comprised of a method for validating a process stream for the presence or absence of a substance of interest such as a chemical warfare agent; that is, for verifying that a chemical warfare agent is present in an input line for feeding the agent into a reaction vessel for destruction, or, in a facility for producing commercial chemical products, that a constituent of the chemical warfare agent has not been substituted for the proper chemical compound. The method includes the steps of transmitting light through a sensor positioned in the feed line just before the chemical constituent in the input line enters the reaction vessel, measuring an optical spectrum of the chemical constituent from the light beam transmitted through it, and comparing the measured spectrum to a reference spectrum of the chemical agent and preferable also reference spectra of surrogates. A signal is given if the chemical agent is not entering a reaction vessel for destruction, or if a constituent of a chemical agent is added to a feed line in substitution of the proper chemical compound.

Negligible risk associated with the movement of processed rainbow trout, Oncorhynchus mykiss (Walbaum), from an infectious haematopoietic necrosis virus (IHNV) endemic area

USGS Publications Warehouse

LaPatra, S.E.; Batts, W.N.; Overturf, K.; Jones, G.N.; Shewmaker, W.D.; Winton, J.R.

2001-01-01

To assess the risk of transmission of infectious haematopoietic necrosis virus (IHNV) associated with the movement of processed rainbow trout, Oncorhynchus mykiss, from an area where the virus is endemic, 240 freshly eviscerated fish (225-500 g) exhibiting spinal curvature or spinal compression types of deformities were tested for IHNV by virus isolation and polymerase chain reaction (PCR) techniques. Commercially produced rainbow trout, approximately 1-year-old, that exhibited spinal deformities were considered to have had a high likelihood of having survived an outbreak of IHN. Serological analysis of fish exhibiting spinal curvature or spinal compression types of deformities for anti-IHNV antibodies resulted, in 71 and 50% of the serum samples, respectively, with detectable neutralization activity suggesting previous infection with IHNV. A portion of the skin and muscle in the area of the deformity was collected, as well as brain tissue from each commercially processed fish. Tissue homogenates were tested for IHNV using the epithelioma papulosum cyprini (EPC) cell line pretreated with polyethylene glycol and the chinook salmon embryo (CHSE-214) cell line using standard methods. Nested, reverse transcriptase (RT)-PCR for the detection of IHNV used the central 1231 bp portion of the glycoprotein (G) challenge studies and is suggested as a mechanism responsible for virus clearance. These results provide scientific information that can be used to assess the risk associated with the movement of processed rainbow trout from an IHNV endemic area.

Initially unrecognized distribution of a commercially cooked meat product contaminated over several months with Salmonella serotype Infantis.

PubMed

Kohl, K S; Farley, T A

2000-12-01

An outbreak of salmonellosis occurred among 63 wedding participants. The outbreak was investigated through cohort, laboratory, and environmental studies. Consumption of rice-dressing made from a commercially cooked, meat-based, rice-dressing mix was strongly associated with illness. Nineteen patient isolates, six company/grocery store isolates cultured from the rice-dressing mix, and one environmental isolate from a pump in the production line were of an identical outbreak strain of Salmonella Infantis characterized by pulsed-field gel electrophoresis. In the production line, cooked rice-dressing mix tested negative for S. Infantis before and positive after contact with the contaminated pump. The dressing-mix had an estimated 200 colony-forming units of salmonella per gram of product, and > 180,000 pounds were distributed in 9 states for > or = 2 months before contamination was recognized. Food manufacturers should be required to use systematic, hazard analysis critical control point risk management practices for all processed meat products, validated by periodic microbiologic monitoring of the end product.

Alicyclobacillus Contamination in the Production Line of Kiwi Products in China

PubMed Central

Zhang, Jiangbo; Yue, Tianli; Yuan, Yahong

2013-01-01

Alicyclobacillus are spoilage microbes of many juice products, but contamination of kiwi products by Alicyclobacillus is seldom reported. This study aims to investigate the whole production line of kiwi products in China to assess the potential risk of their contamination. A total of 401 samples from 18 commercial products, 1 processing plant and 16 raw material orchards were tested, and 76 samples were positive, from which 76 strains of microbes were isolated and identified as 4 species of Alicyclobacillus, including Alicyclobacillus acidoterrestris, Alicyclobacillus contaminans, Alicyclobacillus herbarius and Alicyclobacillus cycloheptanicus, and another 9 strains as 3 species of Bacillus by sequencing of their 16S rDNA. Through phylogenetic tree construction and RAPD-PCR amplification, it was found that there exist genotypic diversities to some extent among these isolates. Four test strains (each from one species of the 4 Alicyclobacillus species isolated in this study) could spoil pH adjusted kiwi fruit juice and some commercial kiwi fruit products with producing guaiacol (11–34 ppb). PMID:23844069

Alicyclobacillus contamination in the production line of kiwi products in China.

PubMed

Zhang, Jiangbo; Yue, Tianli; Yuan, Yahong

2013-01-01

Alicyclobacillus are spoilage microbes of many juice products, but contamination of kiwi products by Alicyclobacillus is seldom reported. This study aims to investigate the whole production line of kiwi products in China to assess the potential risk of their contamination. A total of 401 samples from 18 commercial products, 1 processing plant and 16 raw material orchards were tested, and 76 samples were positive, from which 76 strains of microbes were isolated and identified as 4 species of Alicyclobacillus, including Alicyclobacillus acidoterrestris, Alicyclobacillus contaminans, Alicyclobacillus herbarius and Alicyclobacillus cycloheptanicus, and another 9 strains as 3 species of Bacillus by sequencing of their 16S rDNA. Through phylogenetic tree construction and RAPD-PCR amplification, it was found that there exist genotypic diversities to some extent among these isolates. Four test strains (each from one species of the 4 Alicyclobacillus species isolated in this study) could spoil pH adjusted kiwi fruit juice and some commercial kiwi fruit products with producing guaiacol (11-34 ppb).

Use of Bio-Amp, a commercial bio-additive for the treatment of grease trap wastewater containing fat, oil, and grease.

PubMed

Tang, Hao L; Xie, Yuefeng F; Chen, Yen-Chih

2012-11-01

This research investigated the application of Bio-Amp, a commercial bio-additive for the treatment of fat, oil, and grease (FOG) in a grease trap, and evaluated potential impacts of treated effluent on downstream collection system and treatment processes. Results show that after Bio-Amp treatment, FOG deposit formation was reduced by 40%, implicating a potential reduction of sewer line blockages. Chemical oxygen demand (COD), total nitrogen (TN), total phosphorus (TP) and total fatty acids were reduced by 39%, 33%, 56%, and 59%, respectively, which represents an overall loading reduction of 9% COD, 5% TN and 40% TP received by the treatment plant from all the dining halls. On the other hand, readily biodegradable COD fractions significantly increased, which implies a potential improvement on Bio-P removal. Overall, the results showed that application of Bio-Amp in grease trap provides potential reduction of sewer line blockages, and can also alleviate downstream treatment burden. Copyright © 2012 Elsevier Ltd. All rights reserved.

Technology for Manufacturing Efficiency

NASA Technical Reports Server (NTRS)

1995-01-01

The Ground Processing Scheduling System (GPSS) was developed by Ames Research Center, Kennedy Space Center and divisions of the Lockheed Company to maintain the scheduling for preparing a Space Shuttle Orbiter for a mission. Red Pepper Software Company, now part of PeopleSoft, Inc., commercialized the software as their ResponseAgent product line. The software enables users to monitor manufacturing variables, report issues and develop solutions to existing problems.

JPRS Report, Soviet Union, International Affairs.

DTIC Science & Technology

1987-08-10

centers to help maintain sold equipment; organize joint-stock companies ; open technical-commercial buros, etc. We plan to reorganize our patent...systematically. The successes of the CEMA countries are especially tangible against the background of the economic situation which has taken shape in the...the Unilever Fleysgrup firm they showed us a kielbasa and sausage production line which uses the process of coextrusion. It can produce one and a

16 CFR Figure 5 to Part 1203 - Location of Tesr Lines for Helmets Intended for Persons Ages 1 and Older

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Location of Tesr Lines for Helmets Intended for Persons Ages 1 and Older 5 Figure 5 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 5 Figure 5 to Part 1203—Location of Tesr Lines fo...

16 CFR Figure 5 to Part 1203 - Location of Tesr Lines for Helmets Intended for Persons Ages 1 and Older

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Location of Tesr Lines for Helmets Intended for Persons Ages 1 and Older 5 Figure 5 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 5 Figure 5 to Part 1203—Location of Tesr Lines fo...

16 CFR Figure 5 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Ages 1 and Older

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Location of Test Lines for Helmets Intended for Persons Ages 1 and Older 5 Figure 5 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 5 Figure 5 to Part 1203—Location of Test Lines fo...

16 CFR Figure 5 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Ages 1 and Older

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Location of Test Lines for Helmets Intended for Persons Ages 1 and Older 5 Figure 5 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 5 Figure 5 to Part 1203—Location of Test Lines fo...

16 CFR Figure 5 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Ages 1 and Older

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Location of Test Lines for Helmets Intended for Persons Ages 1 and Older 5 Figure 5 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 5 Figure 5 to Part 1203—Location of Test Lines fo...

Postharvest Reduction of Coliphage MS2 from Romaine Lettuce during Simulated Commercial Processing with and without a Chlorine-Based Sanitizer.

PubMed

Wengert, Samantha L; Aw, Tiong Gim; Ryser, Elliot T; Rose, Joan B

2017-02-01

Viral foodborne outbreaks are a serious threat to public health, and fresh produce is becoming increasingly recognized as a transmission vehicle. To limit foodborne disease, ready-to-eat leafy greens are typically washed with a chlorine-based sanitizer during commercial production. This study assessed the efficacy of a chlorine-based sanitizer against coliphage MS2, as a potential surrogate for foodborne viruses, on fresh-cut romaine lettuce during simulated commercial production using a small-scale processing line. Before processing, romaine lettuce was inoculated to contain approximately 10 5 and 10 6 PFU/g of MS2 for experiments with and without sanitizer, respectively. Lettuce samples were collected following each stage of processing, which included mechanical shredding, 2 min of flume washing (with or without 25 ppm of free chlorine), shaker table dewatering, and centrifugal drying. In addition, the spent centrifuge water and flume wash water were collected, with the flume water concentrated using hollow-fiber ultrafiltration. MS2 was recovered from lettuce in Tris-glycine buffer and quantified as PFUs in a double-agar overlay assay. The greatest reduction in MS2 occurred between shredding and flume washing, with levels remaining relatively stable following flume washing with or without 25 ppm of free chlorine. Average total reductions of 0.8 and 1.0 log PFU/g were seen after processing with and without the sanitizer, respectively, with no statistical difference observed between the two treatments (P > 0.05). The average MS2 level in the spent centrifugation water started at 4.0 log PFU/ml for experiments with sanitizer and the average MS2 reduction in the flume wash water was 4 log (PFU) for experiments with sanitizer, demonstrating that removals could be achieved in the water itself. These findings suggest that the currently recommended commercial production practices are unable to effectively decrease viruses once they have attached to leafy greens during commercial processing.

Flexible probe for measuring local conductivity variations in Li-ion electrode films

NASA Astrophysics Data System (ADS)

Hardy, Emilee; Clement, Derek; Vogel, John; Wheeler, Dean; Mazzeo, Brian

2018-04-01

Li-ion battery performance is governed by electronic and ionic properties of the battery. A key metric that characterizes Li-ion battery cell performance is the electronic conductivity of the electrodes, which are metal foils with thin coatings of electrochemically active materials. To accurately measure the spatial variation of electronic conductivity of these electrodes, a micro-four-line probe (μ4LP) was designed and used to non-destructively measure the properties of commercial-quality Li-ion battery films. This previous research established that the electronic conductivity of film electrodes is not homogeneous throughout the entirety of the deposited film area. In this work, a micro-N-line probe (μNLP) and a flexible micro-flex-line probe (μFLP) were developed to improve the non-destructive micro-scale conductivity measurements that we can take. These devices were validated by comparing test results to that of the predecessor, the micro-four-line probe (μ4LP), on various commercial-quality Li-ion battery electrodes. Results show that there is significant variation in conductivity on a millimeter and even micrometer length scale through the electrode film. Compared to the μ4LP, the μNLP and μFLP also introduce additional measurement configuration possibilities, while providing a more robust design. Researchers and manufacturers can use these probes to identify heterogeneity in their electrodes during the fabrication process, which will lead to the development of better batteries.

Nanostructure formation during accumulative roll bonding of commercial purity titanium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karimi, Mohsen, E-mail: m.karimi@shahroodut.ac.ir

2016-12-15

In this investigation, commercial purity titanium (CP–Ti) was subjected to accumulative roll bonding (ARB) process up to 8 cycles (equivalent strain of 6.4) at the ambient temperature. Transmission electron microscopy (TEM) and X–ray diffraction line profile analysis (XRDLPA) were utilized to investigate the microstructure and grain size evolution. Both characterization techniques could clarify the non–uniform microstructure in the early stages and the uniform microstructure in the final stages of the process. The effectiveness of ARB for the fabrication of the nano–grained structure in CP–Ti was revealed. It was found that the SFE is not the only factor affecting grain refinement,more » as compared with other studies on ARB of FCC materials. Influence of other factors such as the melting temperature and the crystalline structure of the material was determined on the grain refinement. - Highlights: •Nano–grained commercial purity titanium was produced by accumulative roll bonding. •TEM and XRDLPA were used for the characterization of the microstructure. •Important factors affecting the grain size of ARBed materials were discussed.« less

[The Research for Trace Ammonia Escape Monitoring System Based on Tunable Diode Laser Absorption Spectroscopy].

PubMed

Zhang, Li-fang; Wang, Fei; Yu, Li-bin; Yan, Jian-hua; Cen, Ke-fa

2015-06-01

In order to on-line measure the trace ammonia slip of the commercial power plant in the future, this research seeks to measure the trace ammonia by using tunable diode laser absorption spectroscopy under ambient temperature and pressure, and at different temperatures, and the measuring temperature is about 650 K in the power plant. In recent years lasers have become commercially available in the near-infrared where the transitions are much stronger, and ammonia's spectroscopy is pretty complicated and the overlapping lines are difficult to resolve. A group of ammonia transitions near 4 433.5 cm(-1) in the v2 +v3 combination band have been thoroughly selected for detecting lower concentration by analyzing its absorption characteristic and considering other absorption interference in combustion gases where H2O and CO2 mole fraction are very large. To illustrate the potential for NH3 concentration measurements, predictions for NH3, H2O and CO2 are simultaneously simulated, NH3 absorption lines near 4 433.5 cm(-1) wavelength meet weaker H2O absorption than the commercial NH3 lines, and there is almost no CO2 absorption, all the parameters are based on the HITRAN database, and an improved detection limit was obtained for interference-free NH3 monitoring, this 2.25 μm band has line strengths several times larger than absorption lines in the 1.53 μm band which was often used by NH3 sensors for emission monitoring and analyzing. The measurement system was developed with a new Herriott cell and a heated gas cell realizing fast absorption measurements of high resolution, and combined with direct absorption and wavelenguh modulation based on tunable diode laser absorption spectroscopy at different temperatures. The lorentzian line shape is dominant at ambient temperature and pressure, and the estimated detectivity is approximately 0.225 x 10(-6) (SNR = 1) for the directed absorption spectroscopy, assuming a noise-equivalent absorbance of 1 x 10(-4). The heated cell experiments with controlled the temperature were performed to validate the sensing strategy. Here the Wavelength Modulation Spectroscopy (WMS) strategy was usually used to measure lower gas concentration for high noise immunity to the non-absorption transmission losses. The great agreement 2f signal with the calibrated concentration is within the uncertainty at different temperatures by using simple digital signal processing such as multiple averages, wavelet analysis and so on. The denoise processing has a great advantage in application and implementation over other noise suppression techniques. The result provided a good basis for trace ammonia escape detection based on tunable diode laser absorption spectroscopy.

Multiple wavelength silicon photonic 200 mm R+D platform for 25Gb/s and above applications

NASA Astrophysics Data System (ADS)

Szelag, B.; Blampey, B.; Ferrotti, T.; Reboud, V.; Hassan, K.; Malhouitre, S.; Grand, G.; Fowler, D.; Brision, S.; Bria, T.; Rabillé, G.; Brianceau, P.; Hartmann, J. M.; Hugues, V.; Myko, A.; Elleboode, F.; Gays, F.; Fédéli, J. M.; Kopp, C.

2016-05-01

A silicon photonics platform that uses a CMOS foundry line is described. Fabrication process is following a modular integration scheme which leads to a flexible platform, allowing different device combinations. A complete device library is demonstrated for 1310 nm applications with state of the art performances. A PDK which includes specific photonic features and which is compatible with commercial EDA tools has been developed allowing an MPW shuttle service. Finally platform evolutions such as device offer extension to 1550 nm or new process modules introduction are presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khalil, C.N.

Formation of paraffin (wax) in cold deepwater flowlines is a major problem for offshore operators of such facilities. Petrobras faces this problem continuously in its deepwater operations in the Campos basin, offshore Brazil. Since 1990, through its Petrobras Research Center (CENPES), the company has developed, extensively field tested, and recently commercialized, a novel technique for chemically removing such wax depositions. The process involves mixing and introducing to the line, two inorganic salts and organic solvents. The ensuing chemical reaction--which both generates nitrogen and heats the inside of the blocked flowline--allows the solvent to dissolve and dislodge the buildup, which ismore » then flushed from the line. The process is called the Nitrogen Generation System (SGN). Petrobras/CENPES has recently formed a joint venture with the Brazilian service company Maritima Navegacao e Engenharia Ltda. to offer SGN services worldwide.« less

Manufacturing process scale-up of optical grade transparent spinel ceramic at ArmorLine Corporation

NASA Astrophysics Data System (ADS)

Spilman, Joseph; Voyles, John; Nick, Joseph; Shaffer, Lawrence

2013-06-01

While transparent Spinel ceramic's mechanical and optical characteristics are ideal for many Ultraviolet (UV), visible, Short-Wave Infrared (SWIR), Mid-Wave Infrared (MWIR), and multispectral sensor window applications, commercial adoption of the material has been hampered because the material has historically been available in relatively small sizes (one square foot per window or less), low volumes, unreliable supply, and with unreliable quality. Recent efforts, most notably by Technology Assessment and Transfer (TA and T), have scaled-up manufacturing processes and demonstrated the capability to produce larger windows on the order of two square feet, but with limited output not suitable for production type programs. ArmorLine Corporation licensed the hot-pressed Spinel manufacturing know-how of TA and T in 2009 with the goal of building the world's first dedicated full-scale Spinel production facility, enabling the supply of a reliable and sufficient volume of large Transparent Armor and Optical Grade Spinel plates. With over $20 million of private investment by J.F. Lehman and Company, ArmorLine has installed and commissioned the largest vacuum hot press in the world, the largest high-temperature/high-pressure hot isostatic press in the world, and supporting manufacturing processes within 75,000 square feet of manufacturing space. ArmorLine's equipment is capable of producing window blanks as large as 50" x 30" and the facility is capable of producing substantial volumes of material with its Lean configuration and 24/7 operation. Initial production capability was achieved in 2012. ArmorLine will discuss the challenges that were encountered during scale-up of the manufacturing processes, ArmorLine Optical Grade Spinel optical performance, and provide an overview of the facility and its capabilities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Casella, Amanda J.; Hylden, Laura R.; Campbell, Emily L.

Knowledge of real-time solution properties and composition is a necessity for any spent nuclear fuel reprocessing method. Metal-ligand speciation in aqueous solutions derived from the dissolved commercial spent fuel is highly dependent upon the acid concentration/pH, which influences extraction efficiency and the resulting speciation in the organic phase. Spectroscopic process monitoring capabilities, incorporated in a counter current centrifugal contactor bank, provide a pathway for on-line real-time measurement of solution pH. The spectroscopic techniques are process-friendly and can be easily configured for on-line applications, while classic potentiometric pH measurements require frequent calibration/maintenance and have poor long-term stability in aggressive chemical andmore » radiation environments. Our research is focused on developing a general method for on-line determination of pH of aqueous solutions through chemometric analysis of Raman spectra. Interpretive quantitative models have been developed and validated under the range of chemical composition and pH using a lactic acid/lactate buffer system. The developed model was applied to spectra obtained on-line during solvent extractions performed in a centrifugal contactor bank. The model predicted the pH within 11% for pH > 2, thus demonstrating that this technique could provide the capability of monitoring pH on-line in applications such as nuclear fuel reprocessing.« less

Effects of cell culture conditions on antibody N-linked glycosylation--what affects high mannose 5 glycoform.

PubMed

Pacis, Efren; Yu, Marcella; Autsen, Jennifer; Bayer, Robert; Li, Feng

2011-10-01

The glycosylation profile of therapeutic antibodies is routinely analyzed throughout development to monitor the impact of process parameters and to ensure consistency, efficacy, and safety for clinical and commercial batches of therapeutic products. In this study, unusually high levels of the mannose-5 (Man5) glycoform were observed during the early development of a therapeutic antibody produced from a Chinese hamster ovary (CHO) cell line, model cell line A. Follow up studies indicated that the antibody Man5 level was increased throughout the course of cell culture production as a result of increasing cell culture medium osmolality levels and extending culture duration. With model cell line A, Man5 glycosylation increased more than twofold from 12% to 28% in the fed-batch process through a combination of high basal and feed media osmolality and increased run duration. The osmolality and culture duration effects were also observed for four other CHO antibody producing cell lines by adding NaCl in both basal and feed media and extending the culture duration of the cell culture process. Moreover, reduction of Man5 level from model cell line A was achieved by supplementing MnCl2 at appropriate concentrations. To further understand the role of glycosyltransferases in Man5 level, N-acetylglucosaminyltransferase I GnT-I mRNA levels at different osmolality conditions were measured. It has been hypothesized that specific enzyme activity in the glycosylation pathway could have been altered in this fed-batch process. Copyright © 2011 Wiley Periodicals, Inc.

A Quantitative Transmission Line Experiment

ERIC Educational Resources Information Center

Johnston, D. C.; Silbernagel, B. G.

1969-01-01

Describes modifications of a commercially available strip-type transmission line, which makes possible reproducible measurements of standing waves on the line. Experimental data yield values for the characteristic impedance, phase velocity and line wavelength of radiation in the transmission line, and the dielectric constant of material in the…

Transplantable tissue growth-a commercial space venture

NASA Astrophysics Data System (ADS)

Giuntini, Ronald E.; Vardaman, William K.

1997-01-01

Rantek was incorporated in 1984 to pursue research toward product development in space based biotechnology. The company has maintained an aggressive experiment flight program since 1989 having flown biotechnology experiments in six Consort rockets flights, one Joust rocket flight and eight Space Shuttle missions. The objective of these flights was to conduct a series of research experiments to resolve issues affecting transplantable tissue growth feasibility. The purpose of the flight research was to determine the behavior of lymphocyte mixing, activation, magnetic mixing and process control, drug studies in a model leukemia cell line, and various aspects of the hardware system process control in the low gravity of space. The company is now preparing for a two Space Shuttle flight program as precursors to a sustained, permanent, commercial venture at the Space Station. The shuttle flights will enable new, larger scale tissue growth systems to be tested to determine fundamental process control sensitivity and growth rates unique to a number of tissue types. The answer to these issues will ultimately determine the commercial viability of the Rantek Biospace program. This paper addresses considerations that will drive the cost of a space venture-the largest cost driver will be the cost to and from the station and the cost at the station.

Rapid doubling of the critical current of YBa 2Cu 3O 7-δ coated conductors for viable high-speed industrial processing

DOE PAGES

Leroux, M.; Kihlstrom, K. J.; Holleis, S.; ...

2015-11-09

Here, we demonstrate that 3.5-MeV oxygen irradiation can markedly enhance the in-field critical current of commercial second generation superconducting tapes with an exposure time of just 1 s per 0.8 cm 2. Furthermore we demonstrate how speed is now at the level required for an industrial reel-to-reel post-processing. The irradiation is made on production line samples through the protective silver coating and does not require any modification of the growth process. From TEM imaging, we identify small clusters as the main source of increased vortex pinning.

Relative disease susceptibility and clostridial toxin antibody responses in three commercial broiler lines co-infected with Clostridium perfringens and Eimeria maxima using an experimental model of necrotic enteritis

USDA-ARS?s Scientific Manuscript database

Necrotic enteritis is an enteric disease of poultry resulting from infection by Clostridium perfringens with co-infection by Eimeria spp. constituting a major risk factor for disease pathogenesis. This study compared three commercial broiler chicken lines using an experimental model of necrotic ente...

More Fight-Less Fuel: Reducing Fuel Burn through Ground Process Improvement

DTIC Science & Technology

2013-06-01

These joint government and commercial air operations management suites are fast, accurate, and offer many of 33 same tools as SPADE. However, the U.S...passing hour of the day. Simulating the operations at an airfield is similar to a host of related operations management problems including restaurant...flight line may yield significant fuel and cost reductions. Focusing on the efficient use of ground resources through air operations management in a

Command Center Library Model Document. Comprehensive Approach to Reusable Defense Software (CARDS)

DTIC Science & Technology

1992-05-31

system, and functionality for specifying the layout of the document. 3.7.16.1 FrameMaker FrameMaker is a Commercial Off The Shelf (COTS) component...facilitating WYSIWYG creation of formatted reports with embedded graphics. FrameMaker is an advanced publishing tool that integrates word processing...available for the component FrameMaker : * Product evaluation reports in ASCII and postscript formats • Product assessment on line in model 0 Product

Organ printing: from bioprinter to organ biofabrication line.

PubMed

Mironov, Vladimir; Kasyanov, Vladimir; Markwald, Roger R

2011-10-01

Organ printing, or the layer by layer additive robotic biofabrication of functional three-dimensional tissue and organ constructs using self-assembling tissue spheroid building blocks, is a rapidly emerging technology that promises to transform tissue engineering into a commercially successful biomedical industry. It is increasingly obvious that similar well-established industries implement automated robotic systems on the path to commercial translation and economic success. The use of robotic bioprinters alone however is not sufficient for the development of large industrial scale organ biofabrication. The design and development of a fully integrated organ biofabrication line is imperative for the commercial translation of organ printing technology. This paper presents recent progress and challenges in the development of the essential components of an organ biofabrication line. Copyright © 2011 Elsevier Ltd. All rights reserved.

Bringing a transgenic crop to market: where compositional analysis fits.

PubMed

Privalle, Laura S; Gillikin, Nancy; Wandelt, Christine

2013-09-04

In the process of developing a biotechnology product, thousands of genes and transformation events are evaluated to select the event that will be commercialized. The ideal event is identified on the basis of multiple characteristics including trait efficacy, the molecular characteristics of the insert, and agronomic performance. Once selected, the commercial event is subjected to a rigorous safety evaluation taking a multipronged approach including examination of the safety of the gene and gene product - the protein, plant performance, impact of cultivating the crop on the environment, agronomic performance, and equivalence of the crop/food to conventional crops/food - by compositional analysis. The compositional analysis is composed of a comparison of the nutrient and antinutrient composition of the crop containing the event, its parental line (variety), and other conventional lines (varieties). Different geographies have different requirements for the compositional analysis studies. Parameters that vary include the number of years (seasons) and locations (environments) to be evaluated, the appropriate comparator(s), analytes to be evaluated, and statistical analysis. Specific examples of compositional analysis results will be presented.

Review on characterization of nano-particle emissions and PM morphology from internal combustion engines: Part 2 [Review on morphology and nanostructure characterization of nano-particle emission from internal combustion engines

DOE PAGES

Choi, Seungmok; Myung, C. L.; Park, S.

2014-03-05

This study presents a review of the characterization of physical properties, morphology, and nanostructure of particulate emissions from internal combustion engines. Because of their convenience and readiness of measurement, various on-line commercial instruments have been used to measure the mass, number, and size distribution of nano-particles from different engines. However, these on-line commercial instruments have inherent limitations in detailed analysis of chemical and physical properties, morphology, and nanostructure of engine soot agglomerates, information that is necessary to understand the soot formation process in engine combustion, soot particle behavior in after-treatment systems, and health impacts of the nano-particles. For these reasons,more » several measurement techniques used in the carbon research field, i.e., highresolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and Raman spectroscopy, were used for analysis of engine particulate matter (PM). This review covers a brief introduction of several measurement techniques and previous results from engine nano-particle characterization studies using those techniques.« less

Soliton production with nonlinear homogeneous lines

DOE PAGES

Elizondo-Decanini, Juan M.; Coleman, Phillip D.; Moorman, Matthew W.; ...

2015-11-24

Low- and high-voltage Soliton waves were produced and used to demonstrate collision and compression using diode-based nonlinear transmission lines. Experiments demonstrate soliton addition and compression using homogeneous nonlinear lines. We built the nonlinear lines using commercially available diodes. These diodes are chosen after their capacitance versus voltage dependence is used in a model and the line design characteristics are calculated and simulated. Nonlinear ceramic capacitors are then used to demonstrate high-voltage pulse amplification and compression. The line is designed such that a simple capacitor discharge, input signal, develops soliton trains in as few as 12 stages. We also demonstrated outputmore » voltages in excess of 40 kV using Y5V-based commercial capacitors. The results show some key features that determine efficient production of trains of solitons in the kilovolt range.« less

Transportation and General Traffic Management, Change 2

NASA Technical Reports Server (NTRS)

1979-01-01

This Handbook sets forth those transportation and general traffic management responsibilities, guidelines, and procedures governing the use of commercial and Government transportation for NASA. Transportation is an integral function of the logistic process, involving all activities incident to the movement of persons and things. The fundamental and continuous objectives of transportation are to control and diminish the time-distance of lines of communication by the most suitable means. The function of transportation is accomplished through, and encompasses all, the planning, direction, supervision, and execution of the technical, operational, and administrative tasks required to procure or furnish efficient and economical conveyance of cargo and personnel by all modes of commercial and Government transportation. This Handbook is applicable to NASA Headquarters and Field Installations.

Integrated urban water management in commercial buildings.

PubMed

Trowsdale, S; Gabe, J; Vale, R

2011-01-01

Monitoring results are presented as an annual water balance from the pioneering Landcare Research green building containing commercial laboratory and office space. The building makes use of harvested roof runoff to flush toilets and urinals and irrigate glasshouse experiments, reducing the demand for city-supplied water and stormwater runoff. Stormwater treatment devices also manage the runoff from the carpark, helping curb stream degradation. Composting toilets and low-flow tap fittings further reduce the water demand. Despite research activities requiring the use of large volumes of water, the demand for city-supplied water is less than has been measured in many other green buildings. In line with the principles of sustainability, the composting toilets produce a useable product from wastes and internalise the wastewater treatment process.

Post-harvest Salmonella spp. prevalence in turkey carcasses in processing plant in the northeast part of Poland.

PubMed

Zdrodowska, B; Liedtke, K; Radkowski, M

2014-01-01

Turkeys carcasses at selected point after slaughter on dressing line in poultry were sampled and analyzed for Salmonella. These slaughter turkeys came from the northeast part of Poland. The examinations were carried out in each month of 2009. Three hundred turkeys were selected at random from a commercial slaughter line, immediately after completing the cooling process. The percentage of these 300 turkeys from which Salmonella spp. were isolated was relatively high (8.3%; Salmonella positive results were observed in 25 cases). The lowest Salmonella spp. rate (1.3 %) for slaughter birds was found in the fourth quarter, and the highest contamination rate at 18.6% was found, in the third quarter. The serological types of Salmonella spp. isolated from the whole turkey carcasses were S. Saintpaul, S. Senftenberg, S. Anatum, S. Heidelberg, S. Hadar, S. Typhimurium and S. Infantis.

36 CFR 13.1146 - What other closures and restrictions apply to commercial fishermen and commercial fishing vessels?

Code of Federal Regulations, 2014 CFR

2014-07-01

... IN ALASKA Special Regulations-Glacier Bay National Park and Preserve Commercial Fishing § 13.1146... Inlets. (b) Commercial fishing in the waters of the west arm of Glacier Bay north of 58° 50.0′ N latitude... fishing regulations. (c) Commercial fishing in the east arm of Glacier Bay, north of an imaginary line...

36 CFR 13.1146 - What other closures and restrictions apply to commercial fishermen and commercial fishing vessels?

Code of Federal Regulations, 2012 CFR

2012-07-01

... IN ALASKA Special Regulations-Glacier Bay National Park and Preserve Commercial Fishing § 13.1146... Inlets. (b) Commercial fishing in the waters of the west arm of Glacier Bay north of 58° 50.0′ N latitude... fishing regulations. (c) Commercial fishing in the east arm of Glacier Bay, north of an imaginary line...

Selecting a Classification Ensemble and Detecting Process Drift in an Evolving Data Stream

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heredia-Langner, Alejandro; Rodriguez, Luke R.; Lin, Andy

2015-09-30

We characterize the commercial behavior of a group of companies in a common line of business using a small ensemble of classifiers on a stream of records containing commercial activity information. This approach is able to effectively find a subset of classifiers that can be used to predict company labels with reasonable accuracy. Performance of the ensemble, its error rate under stable conditions, can be characterized using an exponentially weighted moving average (EWMA) statistic. The behavior of the EWMA statistic can be used to monitor a record stream from the commercial network and determine when significant changes have occurred. Resultsmore » indicate that larger classification ensembles may not necessarily be optimal, pointing to the need to search the combinatorial classifier space in a systematic way. Results also show that current and past performance of an ensemble can be used to detect when statistically significant changes in the activity of the network have occurred. The dataset used in this work contains tens of thousands of high level commercial activity records with continuous and categorical variables and hundreds of labels, making classification challenging.« less

Low-cost and high-speed optical mark reader based on an intelligent line camera

NASA Astrophysics Data System (ADS)

Hussmann, Stephan; Chan, Leona; Fung, Celine; Albrecht, Martin

2003-08-01

Optical Mark Recognition (OMR) is thoroughly reliable and highly efficient provided that high standards are maintained at both the planning and implementation stages. It is necessary to ensure that OMR forms are designed with due attention to data integrity checks, the best use is made of features built into the OMR, used data integrity is checked before the data is processed and data is validated before it is processed. This paper describes the design and implementation of an OMR prototype system for marking multiple-choice tests automatically. Parameter testing is carried out before the platform and the multiple-choice answer sheet has been designed. Position recognition and position verification methods have been developed and implemented in an intelligent line scan camera. The position recognition process is implemented into a Field Programmable Gate Array (FPGA), whereas the verification process is implemented into a micro-controller. The verified results are then sent to the Graphical User Interface (GUI) for answers checking and statistical analysis. At the end of the paper the proposed OMR system will be compared with commercially available system on the market.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elizondo-Decanini, Juan M.; Coleman, Phillip D.; Moorman, Matthew W.

Low- and high-voltage Soliton waves were produced and used to demonstrate collision and compression using diode-based nonlinear transmission lines. Experiments demonstrate soliton addition and compression using homogeneous nonlinear lines. We built the nonlinear lines using commercially available diodes. These diodes are chosen after their capacitance versus voltage dependence is used in a model and the line design characteristics are calculated and simulated. Nonlinear ceramic capacitors are then used to demonstrate high-voltage pulse amplification and compression. The line is designed such that a simple capacitor discharge, input signal, develops soliton trains in as few as 12 stages. We also demonstrated outputmore » voltages in excess of 40 kV using Y5V-based commercial capacitors. The results show some key features that determine efficient production of trains of solitons in the kilovolt range.« less

Agile Thermal Management STT-RX. Catalytic Influence of Ni-based Additives on the Dehydrogentation Properties of Ball Milled MgH2 (PREPRINT)

DTIC Science & Technology

2011-12-01

Wronski: Particle size, grain size and gamma-MgH2 effects on the desorption properties of nanocrystal- line commercial magnesium hydride processed...Catalytic effects of various forms of nickel on the synthesis rate and hydrogen desorption properties of nanocrystalline magnesium hydride (MgH2...dehydrogenation reaction. 15. SUBJECT TERMS magnesium hydride , MgH, thermal energy storage materials, endothermic reaction 16. SECURITY CLASSIFICATION

Controlling Gas-Flow Mass Ratios

NASA Technical Reports Server (NTRS)

Morris, Brian G.

1990-01-01

Proposed system automatically controls proportions of gases flowing in supply lines. Conceived for control of oxidizer-to-fuel ratio in new gaseous-propellant rocket engines. Gas-flow control system measures temperatures and pressures at various points. From data, calculates control voltages for electronic pressure regulators for oxygen and hydrogen. System includes commercially available components. Applicable to control of mass ratios in such gaseous industrial processes as chemical-vapor depostion of semiconductor materials and in automotive engines operating on compressed natural gas.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mills, G.J.; Brown, G.G.; Waterman, D.D.

The feasibility of prestressing commercial boron/epoxy and graphite/epoxy prepreg material to higher strengths and lower property dispersions is demonstrated. Its practical application as an on-line process for improving quality levels is possible with minor modifications to current experimental practice. The mechanics of the bendstressing method affects a controlled alteration in the fiber defect content to the extent that composite improvements can be achieved approaching the inherent fiber quality with dispersions in properties reduced to the 1 to 2% range. (Author, modified-PL)

Estimation and evaluation of management options to control and/or reduce the risk of not complying with commercial sterility.

PubMed

Pujol, Laure; Albert, Isabelle; Magras, Catherine; Johnson, Nicholas Brian; Membré, Jeanne-Marie

2015-11-20

In a previous study, a modular process risk model, from the raw material reception to the final product storage, was built to estimate the risk of a UHT-aseptic line of not complying with commercial sterility (Pujol et al., 2015). This present study was focused on demonstrating how the model (updated version with uncertainty and variability separated and 2(nd) order Monte Carlo procedure run) could be used to assess quantitatively the influence of management options. This assessment was done in three steps: pinpoint which process step had the highest influence on the risk, identify which management option(s) could be the most effective to control and/or reduce the risk, and finally evaluate quantitatively the influence of changing process setting(s) on the risk. For Bacillus cereus, it was identified that during post-process storage in an aseptic tank, there was potentially an air re-contamination due to filter efficiency loss (efficiency loss due to successive in-place sterilizations after cleaning operations), followed by B. cereus growth. Two options were then evaluated: i) reducing by one fifth of the number of filter sterilizations before renewing the filters, ii) designing new UHT-aseptic lines without an aseptic tank, i.e. without a storage period after the thermal process and before filling. Considering the uncertainty in the model, it was not possible to confirm whether these options had a significant influence on the risk associated with B. cereus. On the other hand, for Geobacillus stearothermophilus, combinations of heat-treatment time and temperature enabling the control or reduction in risk by a factor of ca. 100 were determined; for ease of operational implementation, they were presented graphically in the form of iso-risk curves. For instance, it was established that a heat treatment of 138°C for 31s (instead of 138°C for 25s) enabled a reduction in risk to 18×10(-8) (95% CI=[10; 34]×10(-8)), instead of 578×10(-8) (95% CI=[429; 754]×10(-8)) initially. In conclusion, a modular risk model, as the one exemplified here with a UHT-aseptic line, is a valuable tool in process design and operation, bringing definitive quantitative elements into the decision making process. Copyright © 2015 Elsevier B.V. All rights reserved.

Optical coherence tomography as a novel tool for in-line monitoring of a pharmaceutical film-coating process.

PubMed

Markl, Daniel; Hannesschläger, Günther; Sacher, Stephan; Leitner, Michael; Khinast, Johannes G

2014-05-13

Optical coherence tomography (OCT) is a contact-free non-destructive high-resolution imaging technique based on low-coherence interferometry. This study investigates the application of spectral-domain OCT as an in-line quality control tool for monitoring pharmaceutical film-coated tablets. OCT images of several commercially-available film-coated tablets of different shapes, formulations and coating thicknesses were captured off-line using two OCT systems with centre wavelengths of 830nm and 1325nm. Based on the off-line image evaluation, another OCT system operating at a shorter wavelength was selected to study the feasibility of OCT as an in-line monitoring method. Since in spectral-domain OCT motion artefacts can occur as a result of the tablet or sensor head movement, a basic understanding of the relationship between the tablet speed and the motion effects is essential for correct quantifying and qualifying of the tablet coating. Experimental data was acquired by moving the sensor head of the OCT system across a static tablet bed. Although examining the homogeneity of the coating turned more difficult with increasing transverse speed of the tablets, the determination of the coating thickness was still highly accurate at a speed up to 0.7m/s. The presented OCT setup enables the investigation of the intra- and inter-tablet coating uniformity in-line during the coating process. Copyright © 2014 Elsevier B.V. All rights reserved.

A comparative study of human IgE binding to proteins of a genetically modified (GM) soybean and six non-GM soybeans grown in multiple locations.

PubMed

Lu, Mei; Jin, Yuan; Ballmer-Weber, Barbara; Goodman, Richard E

2018-02-01

Prior to commercialization, genetically modified (GM) crops are evaluated to determine the allergenicity of the newly expressed protein. Some regulators require an evaluation of endogenous allergens in commonly allergenic crops including soybean to determine if genetic transformation increased endogenous allergen concentrations, even asking for IgE testing using sera from individual sensitized subjects. Little is known about the variability of the expression of endogenous allergens among non-GM varieties or under different environmental conditions. We tested IgE binding to endogenous allergenic proteins in an experimental non-commercial GM line, a non-GM near-isoline control, and five non-GM commercial soybean lines replicated at three geographically separated locations. One-dimensional (1D) and two-dimensional (2D) immunoblotting and ELISA were performed using serum or plasma from eleven soybean allergic patients. The results of immunoblots and ELISA showed no significant differences in IgE binding between the GM line and its non-GM near-isoline control. However, some distinct differences in IgE binding patterns were observed among the non-GM commercial soybean lines and between different locations, highlighting the inherent variability in endogenous allergenic proteins. Understanding the potential variability in the levels of endogenous allergens is necessary to establish a standard of acceptance for GM soybeans compared to non-GM soybean events and lines. Copyright © 2018. Published by Elsevier Ltd.

Analysis of Campylobacter spp. contamination in broilers from the farm to the final meat cuts by using restriction fragment length polymorphism of the polymerase chain reaction products.

PubMed

Takahashi, Ryouta; Shahada, Francis; Chuma, Takehisa; Okamoto, Karoku

2006-08-01

We investigated the genotype diversity and dynamics of Campylobacter jejuni and Campylobacter coli in six commercial broiler farms during rearing and abattoir processing. In total, 223 C. jejuni and 36 C. coli strains isolated (on farm, transportation crates, carcasses after defeathering, and chicken wing meat at the end of the processing line) were subtyped by PCR-RFLP based on flagellin (fla typing) gene. Eleven (C. jejuni) and four (C. coli) different RFLP patterns were found. Multiple C. jejuni genotypes were identified in five out of six farms (except Farm 5). Furthermore, a clear tendency for dominance of particular genotypes was observed in almost all farms except Farm 3. Although diverse C. jejuni genotypes were isolated on the farms and transport crates, they were not detected in chicken wing cuts at the end of the processing line. We also observed varied distribution of types in different sampling stages both at the farm level and the processing environment. However, the interpretation of such fluctuations is precarious as new types occurred on some occasions, particularly during processing. Our results show that chicken wing meat contamination resulted mainly from farm strain carryover, and that the carcasses were probably contaminated during processing. In addition, the new strain types observed were isolated more frequently after defeathering as compared to other processing steps. Therefore, this stage, in addition to evisceration, is one of the critical control points in the processing line to prevent cross-contamination and for controlling the spread of campylobacters.

12 CFR 563c.102 - Financial statement presentation.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., (ii) commercial paper, and (iii) other short-term borrowings. (b) Federal funds purchased and sales of... financial statements. The amount of these lines of credit which support a commercial paper borrowing... sold under agreements to repurchase, commercial paper, and other short-term borrowings. 8. Interest on...

12 CFR 563c.102 - Financial statement presentation.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., (ii) commercial paper, and (iii) other short-term borrowings. (b) Federal funds purchased and sales of... financial statements. The amount of these lines of credit which support a commercial paper borrowing... sold under agreements to repurchase, commercial paper, and other short-term borrowings. 8. Interest on...

16 CFR 300.23 - Linings, paddings, stiffening, trimmings and facings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Linings, paddings, stiffening, trimmings and... Linings, paddings, stiffening, trimmings and facings. (a) In labeling or marking garments or articles of apparel which are wool products, the fiber content of any linings, paddings, stiffening, trimmings or...

16 CFR 300.23 - Linings, paddings, stiffening, trimmings and facings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Linings, paddings, stiffening, trimmings and... Linings, paddings, stiffening, trimmings and facings. (a) In labeling or marking garments or articles of apparel which are wool products, the fiber content of any linings, paddings, stiffening, trimmings or...

Process property studies of melt blown thermoplastic polyurethane polymers

NASA Astrophysics Data System (ADS)

Lee, Youn Eung

The primary goal of this research was to determine optimum processing conditions to produce commercially acceptable melt blown (MB) thermoplastic polyurethane (TPU) webs. The 6-inch MB line and the 20-inch wide Accurate Products MB pilot line at the Textiles and Nonwovens Development Center (TANDEC), The University of Tennessee, Knoxville, were utilized for this study. The MB TPU trials were performed in four different phases: Phase 1 focused on the envelope of the MB operating conditions for different TPU polymers; Phase 2 focused on the production of commercially acceptable MB TPU webs; Phase 3 focused on the optimization of the processing conditions of MB TPU webs, and the determination of the significant relationships between processing parameters and web properties utilizing statistical analyses; Based on the first three phases, a more extensive study of fiber and web formation in the MB TPU process was made and a multi liner regression model for the MB TPU process versus properties was also developed in Phase 4. In conclusion, the basic MB process was fundamentally valid for the MB TPU process; however, the MB process was more complicated for TPU than PP, because web structures and properties of MB TPUs are very sensitive to MB process conditions: Furthermore, different TPU grades responded very differently to MB processing and exhibited different web structure and properties. In Phase 3 and Phase 4, small fiber diameters of less than 5mum were produced from TPU237, TPU245 and TPU280 pellets, and the mechanical strengths of MB TPU webs including the tensile strength, tear strength, abrasion resistance and tensile elongation were notably good. In addition, the statistical model showed useful interaction regarding trends for processing parameters versus properties of MB TPU webs. Die and air temperature showed multicollinearity problems and fiber diameter was notably affected by air flow rate, throughput and die/air temperature. It was also shown that most of the MB TPU web properties including mechanical strength, air permeability and fiber diameters were affected by air velocity and die temperature.

At-line validation of a process analytical technology approach for quality control of melamine-urea-formaldehyde resin in composite wood-panel production using near infrared spectroscopy.

PubMed

Meder, Roger; Stahl, Wolfgang; Warburton, Paul; Woolley, Sam; Earnshaw, Scott; Haselhofer, Klaus; van Langenberg, Ken; Ebdon, Nick; Mulder, Roger

2017-01-01

The reactivity of melamine-urea-formaldehyde resins is of key importance in the manufacture of engineered wood products such as medium density fibreboard (MDF) and other wood composite products. Often the MDF manufacturing plant has little available information on the resin reactivity other than details of the resin specification at the time of batch manufacture, which often occurs off-site at a third-party resin plant. Often too, fresh resin on delivery at the MDF plant is mixed with variable volume of aged resin in storage tanks, thereby rendering any specification of the fresh resin batch obsolete. It is therefore highly desirable to develop a real-time, at-line or on-line, process analytical technology to monitor the quality of the resin prior to MDF panel manufacture. Near infrared (NIR) spectroscopy has been calibrated against standard quality methods and against 13 C nuclear magnetic resonance (NMR) measures of molecular composition in order to provide at-line process analytical technology (PAT), to monitor the resin quality, particularly the formaldehyde content of the resin. At-line determination of formaldehyde content in the resin was made possible using a six-factor calibration with an R 2 (cal) value of 0.973, and R 2 (CV) value of 0.929 and a root-mean-square error of cross-validation of 0.01. This calibration was then used to generate control charts of formaldehyde content at regular four-hourly periods during MDF panel manufacture in a commercial MDF manufacturing plant.

Pseudoislet of hybrid cellular spheroids from commercial cell lines.

PubMed

Jo, Y H; Nam, B M; Kim, B Y; Nemeno, J G; Lee, S; Yeo, J E; Yang, W; Park, S H; Kim, Y S; Lee, J I

2013-10-01

Investigators conducting diabetes-related research have focused on islet transplantation as a radical therapy for type 1 diabetes mellitus. Pancreatic islet isolation, an essential process, is a very demanding work because of the proteolytic enzymes, species, treatment time, and individual difference. Replacement of primary isolated pancreatic islets must be carried out continuously for various in vitro tests, making primary isolated islets a useful tool for cell transplantation research. Hence, we sought to develop pseudoislets from commercial pancreas-derived cell lines. In this study, we used RIN-5F and RIN-m cells, which secrete insulin, somatostatin, or glucagon. To manufacture hybrid cellular spheroids, the cells were cultured under hanging drop plate and nonadhesive plate methods. We observed that hybrid cellular pseudoislets exhibited an oval shape, with sizes ranging from 590 to 1200 μm. Their morphology was similar to naïve islets. Cell line pseudoislets secreted and expressed insulin, glucagon, and somatostatin, as confirmed by reverse transcriptase polymerase chain reaction, enzyme-linked immunosorbent assay, and immunohistochemistry analyses. Thus, the current artificially manufactured biomimetic pseudoislets resembled pancreatic islets of the endocrine system, appearing as cellular aggregates that secreted insulin, glucagon, and somatostatin. Enhanced immunoisolation techniques may lead to the development of new islet sources for pancreatic transplantation through this pseudoislet strategy. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

Bilayer lift-off process for aluminum metallization

NASA Astrophysics Data System (ADS)

Wilson, Thomas E.; Korolev, Konstantin A.; Crow, Nathaniel A.

2015-01-01

Recently published reports in the literature for bilayer lift-off processes have described recipes for the patterning of metals that have recommended metal-ion-free developers, which do etch aluminum. We report the first measurement of the dissolution rate of a commercial lift-off resist (LOR) in a sodium-based buffered commercial developer that does not etch aluminum. We describe a reliable lift-off recipe that is safe for multiple process steps in patterning thin (<100 nm) and thick aluminum devices with micron-feature sizes. Our patterning recipe consists of an acid cleaning of the substrate, the bilayer (positive photoresist/LOR) deposition and development, the sputtering of the aluminum film along with a palladium capping layer and finally, the lift-off of the metal film by immersion in the LOR solvent. The insertion into the recipe of postexposure and sequential develop-bake-develop process steps are necessary for an acceptable undercut. Our recipe also eliminates any need for accompanying sonication during lift-off that could lead to delamination of the metal pattern from the substrate. Fine patterns were achieved for both 100-nm-thick granular aluminum/palladium bilayer bolometers and 500-nm-thick aluminum gratings with 6-μm lines and 4-μm spaces.

A weight-of-evidence approach to identify nanomaterials in consumer products: a case study of nanoparticles in commercial sunscreens.

PubMed

Cuddy, Michael F; Poda, Aimee R; Moser, Robert D; Weiss, Charles A; Cairns, Carolyn; Steevens, Jeffery A

2016-01-01

Nanoscale ingredients in commercial products represent a point of emerging environmental concern due to recent findings that correlate toxicity with small particle size. A weight-of-evidence (WOE) approach based upon multiple lines of evidence (LOE) is developed here to assess nanomaterials as they exist in consumer product formulations, providing a qualitative assessment regarding the presence of nanomaterials, along with a baseline estimate of nanoparticle concentration if nanomaterials do exist. Electron microscopy, analytical separations, and X-ray detection methods were used to identify and characterize nanomaterials in sunscreen formulations. The WOE/LOE approach as applied to four commercial sunscreen products indicated that all four contained at least 10% dispersed primary particles having at least one dimension <100 nm in size. Analytical analyses confirmed that these constituents were comprised of zinc oxide (ZnO) or titanium dioxide (TiO2). The screening approaches developed herein offer a streamlined, facile means to identify potentially hazardous nanomaterial constituents with minimal abrasive processing of the raw material.

Differential gene expression profiles of β-defensins in the crop, intestine, and spleen using a necrotic enteritis model in 2 commercial broiler chicken lines.

PubMed

Hong, Y H; Song, W; Lee, S H; Lillehoj, H S

2012-05-01

Changes in the expression levels of avian β-defensin (AvBD) mRNA were evaluated in necrotic enteritis (NE) disease model in 2 genetically disparate commercial broiler chicken lines: Ross and Cobb. The NE was initiated in the gut by a previously established co-infection model using oral Eimeria maxima infection followed by a Clostridium perfringens challenge. Among the 14 AvBD types examined, there was a tissue-specific expression of AvBD transcripts: AvBD1, AvBD7, and AvBD9 in the crop; AvBD8, AvBD10, and AvBD13; in the intestine and AvBD1 and AvBD7 in the spleen. The 2 different commercial broiler chicken lines showed differential gene expression patterns of AvBD transcripts following co-infection with E. maxima and C. perfringens, with R-line chickens generally showing higher expression levels than the C strain. Both chicken strains showed enhanced gene expression levels of proinflammatory cytokines, such as IL-1β, IL-6, IL-17F, and TNFSF15 in spleen, and TNFSF15 in intestine, whereas IL-17F was significantly increased only in the intestine of R-line chickens following NE infection. Although the exact nature of interactions between defensins and cytokines in determining the outcome of host innate immune responses to the pathogens of NE remains to be investigated, the differences in gene expression levels of β-defensins and proinflammatory cytokines in the intestine, crop, and spleen could explain the predisposed disease resistance and susceptibility to NE in the 2 commercial broiler chicken lines.

miRNA profiling of high, low and non-producing CHO cells during biphasic fed-batch cultivation reveals process relevant targets for host cell engineering.

PubMed

Stiefel, Fabian; Fischer, Simon; Sczyrba, Alexander; Otte, Kerstin; Hesse, Friedemann

2016-05-10

Fed-batch cultivation of recombinant Chinese hamster ovary (CHO) cell lines is one of the most widely used production modes for commercial manufacturing of recombinant protein therapeutics. Furthermore, fed-batch cultivations are often conducted as biphasic processes where the culture temperature is decreased to maximize volumetric product yields. However, it remains to be elucidated which intracellular regulatory elements actually control the observed pro-productive phenotypes. Recently, several studies have revealed microRNAs (miRNAs) to be important molecular switches of cell phenotypes. In this study, we analyzed miRNA profiles of two different recombinant CHO cell lines (high and low producer), and compared them to a non-producing CHO DG44 host cell line during fed-batch cultivation at 37°C versus a temperature shift to 30°C. Taking advantage of next-generation sequencing combined with cluster, correlation and differential expression analyses, we could identify 89 different miRNAs, which were differentially expressed in the different cell lines and cultivation phases. Functional validation experiments using 19 validated target miRNAs confirmed that these miRNAs indeed induced changes in process relevant phenotypes. Furthermore, computational miRNA target prediction combined with functional clustering identified putative target genes and cellular pathways, which might be regulated by these miRNAs. This study systematically identified novel target miRNAs during different phases and conditions of a biphasic fed-batch production process and functionally evaluated their potential for host cell engineering. Copyright © 2016. Published by Elsevier B.V.

Calibration of a COTS Integration Cost Model Using Local Project Data

NASA Technical Reports Server (NTRS)

Boland, Dillard; Coon, Richard; Byers, Kathryn; Levitt, David

1997-01-01

The software measures and estimation techniques appropriate to a Commercial Off the Shelf (COTS) integration project differ from those commonly used for custom software development. Labor and schedule estimation tools that model COTS integration are available. Like all estimation tools, they must be calibrated with the organization's local project data. This paper describes the calibration of a commercial model using data collected by the Flight Dynamics Division (FDD) of the NASA Goddard Spaceflight Center (GSFC). The model calibrated is SLIM Release 4.0 from Quantitative Software Management (QSM). By adopting the SLIM reuse model and by treating configuration parameters as lines of code, we were able to establish a consistent calibration for COTS integration projects. The paper summarizes the metrics, the calibration process and results, and the validation of the calibration.

A novel microcontroller-based digital instrument for measurement of electrical quantities under non-sinusoidal condition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anaya, O.; Moreno, G.E.L.; Madrigal, M.M.

1999-11-01

In the last years, several definitions of power have been proposed for more accurate measurement of electrical quantities in presence of harmonics pollution on power lines. Nevertheless, only few instruments have been constructed considering these definitions. This paper describes a new microcontroller-based digital instrument, which include definitions based on Harley Transform. The algorithms are fully processed using Fast Hartley Transform (FHT) and 16 bit-microcontroller platform. The constructed prototype was compared with commercial harmonics analyzer instrument.

Memory Metals (MEMRYSAFE, FIRECHEK, ULTRAVALVE)

NASA Technical Reports Server (NTRS)

1991-01-01

A NASA contract led Memry Corporation to the development of commercial products based upon Shape Memory Effect, or the ability of certain metal alloys to change from one shape to another with temperature changes. MEMRYSAFE instantly restricts water flow in shower or sinks before scalding. ULTRAVALVE allows a user to preselect a bathing temperature. FIRECHEK is a fire control safety valve that detects unsafe temperatures and shuts off pneumatic pressure that operates control valves in industrial process lines containing hazardous gases or fluids.

76 FR 75786 - International Product and Price Changes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-05

... Ascension, Bolivia, Cuba, Falkland Islands, and North Korea, revise the lines of text for the Flat Rate..., commercial base, or commercial plus price. [For Ascension, Bolivia, Cuba, and the Falkland Islands revise the...

Comparative in vitro anti-tick efficacy of commercially available products and newly developed phyto-formulations against field collected and resistant tick lines of Rhipicephalus (Boophilus) microplus.

PubMed

Ajith Kumar, K G; Sharma, Anil Kumar; Kumar, Sachin; Ray, D D; Rawat, A K S; Srivastava, Sharad; Ghosh, Srikant

2016-12-01

Rhipicephalus ( Boophilus ) microplus is considered as one of the most widely distributed tick species ecto-parasitizing on livestock and causes fatal diseases with significant production loss. To address the problem of controlling acaricide resistant tick infestations on animals, attention has been paid to develop eco-friendly phyto-acaricides. The present study was undertaken to evaluate the comparative anti-tick activities of commercially available herbal and chemical products with chemically characterized phyto-formulations developed recently against field ticks and resistant tick lines of R. ( B. ) microplus . The chemical product Butox ® Vet was found nearly passive against all the tested resistant tick lines. However, one of the commercial polyherbal product, Zerokeet ® showed an efficacy (E%) of 41.8-75.4 % ([Formula: see text]) using recommended dilution (1:2) against field ticks and resistant tick lines. However, the other commercial product, Erina ® EP has very limited efficacy against all the tested tick. In comparison, the newly developed phyto-formulation, NBA/13/B/2 and NAC-01 conferred an E% of 82.4-91.3 % ([Formula: see text]) and 62.3-94.6 % ([Formula: see text]), respectively, against tested resistant ticks. Results indicated higher marketing potentiality of newly developed formulation in the existing tick problem scenario.

Hybrid wheat: quantitative genetic parameters and consequences for the design of breeding programs.

PubMed

Longin, Carl Friedrich Horst; Gowda, Manje; Mühleisen, Jonathan; Ebmeyer, Erhard; Kazman, Ebrahim; Schachschneider, Ralf; Schacht, Johannes; Kirchhoff, Martin; Zhao, Yusheng; Reif, Jochen Christoph

2013-11-01

Commercial heterosis for grain yield is present in hybrid wheat but long-term competiveness of hybrid versus line breeding depends on the development of heterotic groups to improve hybrid prediction. Detailed knowledge of the amount of heterosis and quantitative genetic parameters are of paramount importance to assess the potential of hybrid breeding. Our objectives were to (1) examine the extent of midparent, better-parent and commercial heterosis in a vast population of 1,604 wheat (Triticum aestivum L.) hybrids and their parental elite inbred lines and (2) discuss the consequences of relevant quantitative parameters for the design of hybrid wheat breeding programs. Fifteen male lines were crossed in a factorial mating design with 120 female lines, resulting in 1,604 of the 1,800 potential single-cross hybrid combinations. The hybrids, their parents, and ten commercial wheat varieties were evaluated in multi-location field experiments for grain yield, plant height, heading time and susceptibility to frost, lodging, septoria tritici blotch, yellow rust, leaf rust, and powdery mildew at up to five locations. We observed that hybrids were superior to the mean of their parents for grain yield (10.7 %) and susceptibility to frost (-7.2 %), leaf rust (-8.4 %) and septoria tritici blotch (-9.3 %). Moreover, 69 hybrids significantly (P < 0.05) outyielded the best commercial inbred line variety underlining the potential of hybrid wheat breeding. The estimated quantitative genetic parameters suggest that the establishment of reciprocal recurrent selection programs is pivotal for a successful long-term hybrid wheat breeding.

The Integration of COTS/GOTS within NASA's HST Command and Control System

NASA Technical Reports Server (NTRS)

Pfarr, Thomas; Reis, James E.

2001-01-01

NASA's mission critical Hubble Space Telescope (HST) command and control system has been re-engineered with commercial-off-the-shelf (COTS/GOTS) and minimal custom code. This paper focuses on the design of this new HST Control Center System (CCS) and the lessons learned throughout its development. CCS currently utilizes more than 30 COTS/GOTS products with an additional 1/2 million lines of custom glueware code; the new CCS exceeds the capabilities of the original system while significantly reducing the lines of custom code by more than 50%. The lifecycle of COTS/GOTS products will be examined including the package selection process, evaluation process, and integration process. The advantages, disadvantages, issues, concerns, and lessons learned for integrating COTS/GOTS into the NASA's mission critical HST CCS will be examined in detail. This paper will reveal the many hidden costs of COTS/GOTS solutions when compared to traditional custom code development efforts; this paper will show the high cost of COTS/GOTS solutions including training expenses, consulting fees, and long-term maintenance expenses.

Green leaf lettuce breeding lines with resistance to corky root, 06-831 and 06-833.

USDA-ARS?s Scientific Manuscript database

The Agricultural Research Service, United States Department of Agriculture (USDA) announces the release of two breeding lines of green leaf lettuce (Lactuca sativa L.). The lines 06-831 and 06-833 look similar to ‘Waldmann’s Green’ and related cultivars. The lines may be suitable for commercial pro...

New Catalyst Reduces Wasted Carbon in Biofuel Process, Lowers Cost

DOE Office of Scientific and Technical Information (OSTI.GOV)

Researchers at NREL recently developed a catalyst formulation that incorporates more hydrogen into the DME-to-high-octane gasoline process, resulting in a higher yield to gasoline-range products. Further, the researchers developed a secondary process that efficiently couples a portion of the gasoline-range product to yield jet/diesel fuels. The modified catalyst doubles the conversion rate of DME, which can be produced from biomass, to the high-octane gasoline product and significantly decreases the formation of wasted byproducts. For the distillate-range product, 80% of the mixture is in line with ASTM standards for use as a jet fuel blendstock. The increased productivity of high-octane gasolinemore » and the development of a value-added distillate blendstock process further improve the economic viability toward commercially implementing this renewable fuels process.« less

Development and manufacture of reactive-transfer-printed CIGS photovoltaic modules

NASA Astrophysics Data System (ADS)

Eldada, Louay; Sang, Baosheng; Lu, Dingyuan; Stanbery, Billy J.

2010-09-01

In recent years, thin-film photovoltaic (PV) companies started realizing their low manufacturing cost potential, and grabbing an increasingly larger market share from multicrystalline silicon companies. Copper Indium Gallium Selenide (CIGS) is the most promising thin-film PV material, having demonstrated the highest energy conversion efficiency in both cells and modules. However, most CIGS manufacturers still face the challenge of delivering a reliable and rapid manufacturing process that can scale effectively and deliver on the promise of this material system. HelioVolt has developed a reactive transfer process for CIGS absorber formation that has the benefits of good compositional control, high-quality CIGS grains, and a fast reaction. The reactive transfer process is a two stage CIGS fabrication method. Precursor films are deposited onto substrates and reusable print plates in the first stage, while in the second stage, the CIGS layer is formed by rapid heating with Se confinement. High quality CIGS films with large grains were produced on a full-scale manufacturing line, and resulted in high-efficiency large-form-factor modules. With 14% cell efficiency and 12% module efficiency, HelioVolt started to commercialize the process on its first production line with 20 MW nameplate capacity.

Promising More Information

NASA Technical Reports Server (NTRS)

2003-01-01

When NASA needed a real-time, online database system capable of tracking documentation changes in its propulsion test facilities, engineers at Stennis Space Center joined with ECT International, of Brookfield, Wisconsin, to create a solution. Through NASA's Dual-Use Program, ECT developed Exdata, a software program that works within the company's existing Promise software. Exdata not only satisfied NASA s requirements, but also expanded ECT s commercial product line. Promise, ECT s primary product, is an intelligent software program with specialized functions for designing and documenting electrical control systems. An addon to AutoCAD software, Promis e generates control system schematics, panel layouts, bills of material, wire lists, and terminal plans. The drawing functions include symbol libraries, macros, and automatic line breaking. Primary Promise customers include manufacturing companies, utilities, and other organizations with complex processes to control.

78 FR 58342 - Proposed Fee Schedule for Commercial Filming and Still Photography Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-23

... ; put ``Commercial Filming Fee Schedule'' in the subject line. Mail: Lee Dickinson, Special Park Uses... FURTHER INFORMATION CONTACT: Lee Dickinson, National Park Service at 202-513-7092 or by email at lee...

From Banking to International Governance: Fostering Innovation in Stem Cell Research

PubMed Central

Isasi, Rosario; Knoppers, Bartha M.

2011-01-01

Stem cell banks are increasingly recognized as an essential resource of biological materials for both basic and translational stem cell research. By providing transnational access to quality controlled and ethically sourced stem cell lines, stem cell banks seek to foster international collaboration and innovation. However, given that national stem cell banks operate under different policy, regulatory and commercial frameworks, the transnational sharing of stem cell materials and data can be complicating. This paper will provide an overview of the most pressing challenges regarding the governance of stem cell banks, and the difficulties in designing regulatory and commercial frameworks that foster stem cell research. Moreover, the paper will shed light on the numerous international initiatives that have arisen to help harmonize and standardize stem cell banking and research processes to overcome such challenges. PMID:21904557

The relationship between sperm function and diet: toms are what they eat

USDA-ARS?s Scientific Manuscript database

It is well known that cryopreserved semen could be used to regenerate commercial or research poultry lines; however, fertility rates from poultry semen frozen with current methods are not reliable enough for germ-line retrieval, especially from lines with low reproductive efficiency. As part of a l...

[Development of second-line occupational health services: toward an integrated network of insurers and care providers].

PubMed

Plomp, H N

2000-06-10

To describe the development of the second-line Occupational Health Services and the role of private insurance companies in it over the period 1994-1999. Descriptive cross-sectional study. Data were collected in 1999 from written documents and supplementary interviews with the five largest private providers of disability insurance, the National Insurance Institute, nine Occupational Health Services of different natures and 24 institutions for second-line occupational health service. After the privatization of the Health Law in 1996 and parts of the Law on disability Insurance, most employers covered the risk of continued payment of wages in case of disability with private insurers. These attempted to keep claims down by active engagement in arbitration, treatment and diagnostics of disabled employees so as to counteract avoidable absenteeism. Under the influence of the insurance companies, a trend developed toward integrated nation-wide chains in which the services provided by insurers, by occupational health services and by implementing institutions are geared for one another. Commercial provision of Occupational Health Service is a new, demand-active form of care provision in which the financier plays a key part. This provision of services supplied important innovating impulses for health care in its entirety because of its large scale, strong protocolling of processes and management on the basis of continuous cost-benefit analyses. A lucid and socially acceptable regulation of commercial providers of occupational health services was lacking.

Nuclear Fuel Reprocessing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harold F. McFarlane; Terry Todd

2013-11-01

Reprocessing is essential to closing nuclear fuel cycle. Natural uranium contains only 0.7 percent 235U, the fissile (see glossary for technical terms) isotope that produces most of the fission energy in a nuclear power plant. Prior to being used in commercial nuclear fuel, uranium is typically enriched to 3–5% in 235U. If the enrichment process discards depleted uranium at 0.2 percent 235U, it takes more than seven tonnes of uranium feed to produce one tonne of 4%-enriched uranium. Nuclear fuel discharged at the end of its economic lifetime contains less one percent 235U, but still more than the natural ore.more » Less than one percent of the uranium that enters the fuel cycle is actually used in a single pass through the reactor. The other naturally occurring isotope, 238U, directly contributes in a minor way to power generation. However, its main role is to transmute into plutoniumby neutron capture and subsequent radioactive decay of unstable uraniumand neptuniumisotopes. 239Pu and 241Pu are fissile isotopes that produce more than 40% of the fission energy in commercially deployed reactors. It is recovery of the plutonium (and to a lesser extent the uranium) for use in recycled nuclear fuel that has been the primary focus of commercial reprocessing. Uraniumtargets irradiated in special purpose reactors are also reprocessed to obtain the fission product 99Mo, the parent isotope of technetium, which is widely used inmedical procedures. Among the fission products, recovery of such expensive metals as platinum and rhodium is technically achievable, but not economically viable in current market and regulatory conditions. During the past 60 years, many different techniques for reprocessing used nuclear fuel have been proposed and tested in the laboratory. However, commercial reprocessing has been implemented along a single line of aqueous solvent extraction technology called plutonium uranium reduction extraction process (PUREX). Similarly, hundreds of types of reactor fuels have been irradiated for different purposes, but the vast majority of commercial fuel is uranium oxide clad in zirconium alloy tubing. As a result, commercial reprocessing plants have relatively narrow technical requirements for used nuclear that is accepted for processing.« less

Inexpensive cryogenic insulation replaces vacuum jacketed line

NASA Technical Reports Server (NTRS)

Fuchs, C. E.

1967-01-01

Commercially available aluminized Mylar, cork and fiber glass form a multilayered sealed system and provide rugged and economical field installed insulation for cryogenic /liquid nitrogen or oxygen/ pipe lines in an exposed environment.

Pest Resistance and agronomic performance of advanced BARBREN lines compared to commercial cultivars and the germplasm line BARBREN 713

USDA-ARS?s Scientific Manuscript database

The germplasm line BARBREN 713, which has resistance to both root-knot and reniform nematodes was released in 2012. Its major resistance to reniform nematodes is due to the Ren2 gene derived from Gossypium barbadense GB 713 and located near the DNA marker BNL 3279_105 on chromosome 21. Other lines...

A New Image Processing and GIS Package

NASA Technical Reports Server (NTRS)

Rickman, D.; Luvall, J. C.; Cheng, T.

1998-01-01

The image processing and GIS package ELAS was developed during the 1980's by NASA. It proved to be a popular, influential and powerful in the manipulation of digital imagery. Before the advent of PC's it was used by hundreds of institutions, mostly schools. It is the unquestioned, direct progenitor or two commercial GIS remote sensing packages, ERDAS and MapX and influenced others, such as PCI. Its power was demonstrated by its use for work far beyond its original purpose, having worked several different types of medical imagery, photomicrographs of rock, images of turtle flippers and numerous other esoteric imagery. Although development largely stopped in the early 1990's the package still offers as much or more power and flexibility than any other roughly comparable package, public or commercial. It is a huge body or code, representing more than a decade of work by full time, professional programmers. The current versions all have several deficiencies compared to current software standards and usage, notably its strictly command line interface. In order to support their research needs the authors are in the process of fundamentally changing ELAS, and in the process greatly increasing its power, utility, and ease of use. The new software is called ELAS II. This paper discusses the design of ELAS II.

Genetic selection to increase bone strength affects prevalence of keel bone damage and egg parameters in commercially housed laying hens.

PubMed

Stratmann, A; Fröhlich, E K F; Gebhardt-Henrich, S G; Harlander-Matauschek, A; Würbel, H; Toscano, M J

2016-05-01

The prevalence of keel bone damage as well as external egg parameters of 2 pure lines divergently selected for high (H) and low (L) bone strength were investigated in 2 aviary systems under commercial conditions. A standard LSL hybrid was used as a reference group. Birds were kept mixed per genetic line (77 hens of the H and L line and 201 or 206 hens of the LSL line, respectively, per pen) in 8 pens of 2 aviary systems differing in design. Keel bone status and body mass of 20 focal hens per line and pen were assessed at 17, 18, 23, 30, 36, 43, 52, and 63 wk of age. External egg parameters (i.e., egg mass, eggshell breaking strength, thickness, and mass) were measured using 10 eggs per line at both 38 and 57 wk of age. Body parameters (i.e. tarsus and third primary wing feather length to calculate index of wing loading) were recorded at 38 wk of age and mortality per genetic line throughout the laying cycle. Bone mineral density (BMD) of 15 keel bones per genetic line was measured after slaughter to confirm assignment of the experimental lines. We found a greater BMD in the H compared with the L and LSL lines. Fewer keel bone fractures and deviations, a poorer external egg quality, as well as a lower index of wing loading were found in the H compared with the L line. Mortality was lower and production parameters (e.g., laying performance) were higher in the LSL line compared with the 2 experimental lines. Aviary design affected prevalence of keel bone damage, body mass, and mortality. We conclude that selection of specific bone traits associated with bone strength as well as the related differences in body morphology (i.e., lower index of wing loading) have potential to reduce keel bone damage in commercial settings. Also, the housing environment (i.e., aviary design) may have additive effects. © 2016 Poultry Science Association Inc.

Detection of genomic signatures of recent selection in commercial broiler chickens.

PubMed

Fu, Weixuan; Lee, William R; Abasht, Behnam

2016-08-26

Identification of the genomic signatures of recent selection may help uncover causal polymorphisms controlling traits relevant to recent decades of selective breeding in livestock. In this study, we aimed at detecting signatures of recent selection in commercial broiler chickens using genotype information from single nucleotide polymorphisms (SNPs). A total of 565 chickens from five commercial purebred lines, including three broiler sire (male) lines and two broiler dam (female) lines, were genotyped using the 60K SNP Illumina iSelect chicken array. To detect genomic signatures of recent selection, we applied two methods based on population comparison, cross-population extended haplotype homozygosity (XP-EHH) and cross-population composite likelihood ratio (XP-CLR), and further analyzed the results to find genomic regions under recent selection in multiple purebred lines. A total of 321 candidate selection regions spanning approximately 1.45 % of the chicken genome in each line were detected by consensus of results of both XP-EHH and XP-CLR methods. To minimize false discovery due to genetic drift, only 42 of the candidate selection regions that were shared by 2 or more purebred lines were considered as high-confidence selection regions in the study. Of these 42 regions, 20 were 50 kb or less while 4 regions were larger than 0.5 Mb. In total, 91 genes could be found in the 42 regions, among which 19 regions contained only 1 or 2 genes, and 9 regions were located at gene deserts. Our results provide a genome-wide scan of recent selection signatures in five purebred lines of commercial broiler chickens. We found several candidate genes for recent selection in multiple lines, such as SOX6 (Sex Determining Region Y-Box 6) and cTR (Thyroid hormone receptor beta). These genes may have been under recent selection due to their essential roles in growth, development and reproduction in chickens. Furthermore, our results suggest that in some candidate regions, the same or opposite alleles have been under recent selection in multiple lines. Most of the candidate genes in the selection regions are novel, and as such they should be of great interest for future research into the genetic architecture of traits relevant to modern broiler breeding.

Evaluation of on-line pyrolysis coupled to isotope ratio mass spectrometry for the determination of position-specific (13)C isotope composition of short chain n-alkanes (C6-C12).

PubMed

Gilbert, Alexis; Yamada, Keita; Yoshida, Naohiro

2016-06-01

We measured (13)C intramolecular isotopic composition of commercially available short-chain hydrocarbons (n-C6-n-C12) using (13)C-NMR. Results show that the main variation is between the terminal and the sub-terminal C-atom positions. Site-preference (difference in δ(13)C values between terminal and sub-terminal C-atom positions) among all the samples varies between -12.2‰ and +8.4‰. Comparison of these results with those obtained using on-line pyrolysis coupled with GC-C-IRMS show that the thermal cracking of hydrocarbons occurs with a good isotopic fidelity between terminal and sub-terminal C-atom positions of the starting material and the related pyrolysis products (methane and ethylene). On-line pyrolysis coupled with GC-C-IRMS can thus be used for tracing hydrocarbons biogeochemical processes. Copyright © 2016 Elsevier B.V. All rights reserved.

Estimation of linkage disequilibrium and analysis of genetic diversity in Korean chicken lines.

PubMed

Seo, Dongwon; Lee, Doo Ho; Choi, Nuri; Sudrajad, Pita; Lee, Seung-Hwan; Lee, Jun-Heon

2018-01-01

The development of genetic markers for animal breeding is an effective strategy to reduce the time and cost required to improve economically important traits. To implement genomic selection in the multibreed chicken population of Korea, an understanding of the linkage disequilibrium (LD) status of the target population is essential. In this study, we performed population genetic analyses to investigate LD decay, the effective population size, and breed diversity using 600K high-density single nucleotide polymorphism genotypes of 189 native chickens in 14 lines (including Korean native chicken, imported and adapted purebred and commercial chickens). The results indicated that commercial native chickens have less calculated LD (average, r2 = 0.13-0.26) and purebred native chickens have more calculated LD (average, r2 = 0.24-0.37) across the entire genome. The effective population sizes of the examined lines showed patterns opposite to those of population LD. The phylogeny and admixture analyses showed that commercial and purebred chickens were well distinguished, except for Rhode Island Red (RIR) purebred lines of NC (NIAS_RIR_C) and ND (NIAS_RIR_D). These lines are difficult to distinguish clearly because they originated from the same respective breeds. The results of this study may provide important information for the development of genetic markers that can be used in breeding to improve the economic traits of native chickens.

Estimation of linkage disequilibrium and analysis of genetic diversity in Korean chicken lines

PubMed Central

Seo, Dongwon; Lee, Doo Ho; Choi, Nuri; Sudrajad, Pita; Lee, Seung-Hwan

2018-01-01

The development of genetic markers for animal breeding is an effective strategy to reduce the time and cost required to improve economically important traits. To implement genomic selection in the multibreed chicken population of Korea, an understanding of the linkage disequilibrium (LD) status of the target population is essential. In this study, we performed population genetic analyses to investigate LD decay, the effective population size, and breed diversity using 600K high-density single nucleotide polymorphism genotypes of 189 native chickens in 14 lines (including Korean native chicken, imported and adapted purebred and commercial chickens). The results indicated that commercial native chickens have less calculated LD (average, r2 = 0.13–0.26) and purebred native chickens have more calculated LD (average, r2 = 0.24–0.37) across the entire genome. The effective population sizes of the examined lines showed patterns opposite to those of population LD. The phylogeny and admixture analyses showed that commercial and purebred chickens were well distinguished, except for Rhode Island Red (RIR) purebred lines of NC (NIAS_RIR_C) and ND (NIAS_RIR_D). These lines are difficult to distinguish clearly because they originated from the same respective breeds. The results of this study may provide important information for the development of genetic markers that can be used in breeding to improve the economic traits of native chickens. PMID:29425208

Industrial Implementation of Environmentally Friendly Nanometal Electroplating Process for Chromium and Copper Beryllium Replacement using Low Cost Pulse Current Power Supplies

DTIC Science & Technology

2014-09-10

Cr-Mo, and stainless steel have to some extent found acceptance in various military and commercial CuBe-replacement roles. 1.1.2 Proposed...including low and high strength steels , stainless steel , Inconel and nickel. Figure 4-8 Activation line used to prepare components for nCoP plating...size up to a maximum thickness of 0.012”, can be produced in the tank by electroforming onto a flat stainless steel mandrel and subsequently

Surgical pathology report in the era of desktop publishing.

PubMed

Pillarisetti, S G

1993-01-01

Since it is believed that "a picture is worth a thousand words," incorporation of computer-generated line art was used as a adjunct to gross description in surgical pathology reporting in selected cases. The lack of an integrated software program was overcome by using commercially available graphic and word processing software. A library of drawings was developed over the last few years. Most time-consuming is the development of templates and the graphic library. With some effort it is possible to integrate graphics of high quality into surgical pathology reports.

Advanced Microelectronics Technologies for Future Small Satellite Systems

NASA Technical Reports Server (NTRS)

Alkalai, Leon

1999-01-01

Future small satellite systems for both Earth observation as well as deep-space exploration are greatly enabled by the technological advances in deep sub-micron microelectronics technologies. Whereas these technological advances are being fueled by the commercial (non-space) industries, more recently there has been an exciting new synergism evolving between the two otherwise disjointed markets. In other words, both the commercial and space industries are enabled by advances in low-power, highly integrated, miniaturized (low-volume), lightweight, and reliable real-time embedded systems. Recent announcements by commercial semiconductor manufacturers to introduce Silicon On Insulator (SOI) technology into their commercial product lines is driven by the need for high-performance low-power integrated devices. Moreover, SOI has been the technology of choice for many space semiconductor manufacturers where radiation requirements are critical. This technology has inherent radiation latch-up immunity built into the process, which makes it very attractive to space applications. In this paper, we describe the advanced microelectronics and avionics technologies under development by NASA's Deep Space Systems Technology Program (also known as X2000). These technologies are of significant benefit to both the commercial satellite as well as the deep-space and Earth orbiting science missions. Such a synergistic technology roadmap may truly enable quick turn-around, low-cost, and highly capable small satellite systems for both Earth observation as well as deep-space missions.

Sticks and Stones are Bones: The Eclectic Use of Lines.

ERIC Educational Resources Information Center

Denton, Craig L.

Lines are elemental design devices that provide the primary structure for visual expressions in printed media. Gestalt principles of perception emphasize the role of the viewer, so the energy of the lines and the commercial viability of a particular design depend upon the designer's and photojournalist's understanding of both the viewer's…

Red leaf lettuce breeding line with resistance to corky root, 06-810

USDA-ARS?s Scientific Manuscript database

The Agricultural Research Service, United States Department of Agriculture (USDA) announces the release of a breeding line of red leaf lettuce (Lactuca sativa L.), 06-810. The line may be suitable for commercial production, and is suitable for use as a source of resistance to corky root disease in t...

Intelligent form removal with character stroke preservation

NASA Astrophysics Data System (ADS)

Garris, Michael D.

1996-03-01

A new technique for intelligent form removal has been developed along with a new method for evaluating its impact on optical character recognition (OCR). All the dominant lines in the image are automatically detected using the Hough line transform and intelligently erased while simultaneously preserving overlapping character strokes by computing line width statistics and keying off of certain visual cues. This new method of form removal operates on loosely defined zones with no image deskewing. Any field in which the writer is provided a horizontal line to enter a response can be processed by this method. Several examples of processed fields are provided, including a comparison of results between the new method and a commercially available forms removal package. Even if this new form removal method did not improve character recognition accuracy, it is still a significant improvement to the technology because the requirement of a priori knowledge of the form's geometric details has been greatly reduced. This relaxes the recognition system's dependence on rigid form design, printing, and reproduction by automatically detecting and removing some of the physical structures (lines) on the form. Using the National Institute of Standards and Technology (NIST) public domain form-based handprint recognition system, the technique was tested on a large number of fields containing randomly ordered handprinted lowercase alphabets, as these letters (especially those with descenders) frequently touch and extend through the line along which they are written. Preserving character strokes improves overall lowercase recognition performance by 3%, which is a net improvement, but a single performance number like this doesn't communicate how the recognition process was really influenced. There is expected to be trade- offs with the introduction of any new technique into a complex recognition system. To understand both the improvements and the trade-offs, a new analysis was designed to compare the statistical distributions of individual confusion pairs between two systems. As OCR technology continues to improve, sophisticated analyses like this are necessary to reduce the errors remaining in complex recognition problems.

Quantitative Experimental Study of Defects Induced by Process Parameters in the High-Pressure Die Cast Process

NASA Astrophysics Data System (ADS)

Sharifi, P.; Jamali, J.; Sadayappan, K.; Wood, J. T.

2018-05-01

A quantitative experimental study of the effects of process parameters on the formation of defects during solidification of high-pressure die cast magnesium alloy components is presented. The parameters studied are slow-stage velocity, fast-stage velocity, intensification pressure, and die temperature. The amount of various defects are quantitatively characterized. Multiple runs of the commercial casting simulation package, ProCAST™, are used to model the mold-filling and solidification events. Several locations in the component including knit lines, last-to-fill region, and last-to-solidify region are identified as the critical regions that have a high concentration of defects. The area fractions of total porosity, shrinkage porosity, gas porosity, and externally solidified grains are separately measured. This study shows that the process parameters, fluid flow and local solidification conditions, play major roles in the formation of defects during HPDC process.

Anomalous optogalvanic line shapes of argon metastable transitions in a hollow cathode lamp

NASA Technical Reports Server (NTRS)

Ruyten, W. M.

1993-01-01

Anomalous optogalvanic line shapes were observed in a commercial hollow cathode lamp containing argon buffer gas. Deviations from Gaussian line shapes were particularly strong for transitions originating from the 3P2 metastable level of argon. The anomalous line shapes can be described reasonably well by the assumption that two regions in the discharge are excited simultaneously, each giving rise to a purely Gaussian line shape, but with different polarities, amplitudes, and linewidths.

Investigation of the quantum efficiency of optical heterodyne detectors

NASA Technical Reports Server (NTRS)

Batchman, T. E.

1984-01-01

The frequency response and quantum efficiency of optical photodetectors for heterodyne receivers is investigated. The measurements utilized two spectral lines from the output of two lasers as input to the photodetectors. These lines are easily measurable in power and frequency and hence serve as known inputs. By measuring the output current of the photodetector the quantum efficiency is determined as a function of frequency separation between the two input signals. An investigation of the theoretical basis and accuracy of this type of measurement relative to similar measurements utilizing risetime is undertaken. A theoretical study of the heterodyne process in photodetectors based on semiconductor physics is included so that higher bandwidth detectors may be designed. All measurements are made on commercially available detectors and manufacturers' specifications for normal photodetector operation are compared to the measured heterodyne characteristics.

Comparison of gene expression of Toll-like receptors and cytokines between Piau and Commercial line (Landrace×Large White crossbred) pigs vaccinated against Pasteurella multocida type D.

PubMed

Sousa, Katiene Régia Silva; Ribeiro, André Mauric Frossard; Dantas, Waleska de Melo Ferreira; Oliveira, Leandro Licursi de; Gasparino, Eliane; Guimarães, Simone Eliza Facioni

2017-10-01

We aimed to compare Toll-like receptors (TLR) and cytokines expression in local Piau breed and a Commercial line (Landrace×Large White crossbred) pigs in response to vaccination against Pasteurella multocida type D. Seronegative gilts for Pasteurella multocida type D and Mycoplasma hyopneumoniae were used, from which peripheral blood mononuclear cells (PBMC) were collected in four time points (T0, T1, T2 and T3; before and after each vaccination dose). For bronchoalveolar lavage fluid cells (BALF), we set groups of vaccinated and unvaccinated animals for both genetic groups. Gene expression was evaluated on PBMC and BALF. In PBMC, when we analyzed time points within breeds, significant differences in expression for TLRs and cytokines, except TGFβ, were observed for Commercial animals. For the Piau pigs, only TGFβ showed differential expression. Comparing the expression among genetic groups, the Commercial pigs showed higher expression for TLRs after first vaccination dose, while for IL2, IL6, IL12 and IL13, higher expression was also observed in T3 and IL8 and IL10, in T1 and T3. Still comparing the breeds, the crossbred animals showed higher expression for TNFα in T1 and T2, while for TGFβ only in T2. For gene expression in BALF, vaccinated Commercial pigs showed higher expression of TLR6, TLR10, IL6, IL8, IL10, TNFα and TGFβ genes than vaccinated Piau pigs. The Commercial line pigs showed higher sensitivity to vaccination, while in local Piau breed lower responsiveness, which may partly explain genetic variability in immune response and will let us better understand the tolerance/susceptibility for pasteurellosis. Copyright © 2017 Elsevier Ltd. All rights reserved.

Relationships between processing delay and microbial load of broiler neck skin samples.

PubMed

Lucianez, A; Holmes, M A; Tucker, A W

2010-01-01

The measurable microbial load on poultry carcasses during processing is determined by a number of factors including farm or origin, processing hygiene, and external temperature. This study investigated associations between carcass microbial load and progressive delays to processing. A total of 30 carcasses were delayed immediately after defeathering and before evisceration in a commercial abattoir in groups of five, and were held at ambient temperature for 1, 2, 3, 4, 6, and 8 h. Delayed carcasses were reintroduced to the processing line, and quantitative assessment of total viable count, coliforms, Staphylococcus aureus, and Pseudomonas spp. was undertaken on neck skin flap samples collected after carcass chilling and then pooled for each group. Sampling was repeated on 5 separate days, and the data were combined. Significant increases in total viable count (P = 0.001) and coliforms (P = 0.004), but not for S. aureus or Pseudomonas loads, were observed across the 8-h period of delay. In line with previous studies, there was significant variation in microbiological data according to sampling day. In conclusion, there is a significant and measurable decline in microbiological status of uneviscerated but defeathered poultry carcasses after an 8-h delay, but the variability of sampling results, reflecting the wide range of factors that impact microbial load, means that it is not possible to determine maximum or minimum acceptable periods of processing delay based on this criterion alone.

Nanofluid based on self-nanoencapsulated metal/metal alloys phase change materials with tuneable crystallisation temperature.

PubMed

Navarrete, Nuria; Gimeno-Furio, Alexandra; Mondragon, Rosa; Hernandez, Leonor; Cabedo, Luis; Cordoncillo, Eloisa; Julia, J Enrique

2017-12-14

Nanofluids using nanoencapsulated Phase Change Materials (nePCM) allow increments in both the thermal conductivity and heat capacity of the base fluid. Incremented heat capacity is produced by the melting enthalpy of the nanoparticles core. In this work two important advances in this nanofluid type are proposed and experimentally tested. It is firstly shown that metal and metal alloy nanoparticles can be used as self-encapsulated nePCM using the metal oxide layer that forms naturally in most commercial synthesis processes as encapsulation. In line with this, Sn/SnOx nanoparticles morphology, size and thermal properties were studied by testing the suitability and performance of encapsulation at high temperatures and thermal cycling using a commercial thermal oil (Therminol 66) as the base fluid. Secondly, a mechanism to control the supercooling effect of this nePCM type based on non-eutectic alloys was developed.

Detecting the presence-absence of bluefin tuna by automated analysis of medium-range sonars on fishing vessels.

PubMed

Uranga, Jon; Arrizabalaga, Haritz; Boyra, Guillermo; Hernandez, Maria Carmen; Goñi, Nicolas; Arregui, Igor; Fernandes, Jose A; Yurramendi, Yosu; Santiago, Josu

2017-01-01

This study presents a methodology for the automated analysis of commercial medium-range sonar signals for detecting presence/absence of bluefin tuna (Tunnus thynnus) in the Bay of Biscay. The approach uses image processing techniques to analyze sonar screenshots. For each sonar image we extracted measurable regions and analyzed their characteristics. Scientific data was used to classify each region into a class ("tuna" or "no-tuna") and build a dataset to train and evaluate classification models by using supervised learning. The methodology performed well when validated with commercial sonar screenshots, and has the potential to automatically analyze high volumes of data at a low cost. This represents a first milestone towards the development of acoustic, fishery-independent indices of abundance for bluefin tuna in the Bay of Biscay. Future research lines and additional alternatives to inform stock assessments are also discussed.

Constellation Stretch Goals: Review of Industry Inputs

NASA Technical Reports Server (NTRS)

Lang, John

2006-01-01

Many good ideas received based on industry experience: a) Shuttle operations; b) Commercial aircraft production; c) NASA's historical way of doing business; d) Military and commercial programs. Aerospace performed preliminary analysis: a) Potential savings; b) Cost of implementation; c) Performance or other impact/penalties; d) Roadblocks; e) Unintended consequences; f) Bottom line. Significant work ahead for a "Stretch Goal"to become a good, documented requirement: 1) As a group, the relative "value" of goals are uneven; 2) Focused analysis on each goal is required: a) Need to ensure that a new requirement produces the desired consequence; b) It is not certain that some goals will not create problems elsewhere. 3) Individual implementation path needs to be studied: a) Best place to insert requirement (what level, which document); b) Appropriate wording for the requirement. Many goals reflect "best practices" based on lessons learned and may have value beyond near-term CxP requirements process.

Detecting the presence-absence of bluefin tuna by automated analysis of medium-range sonars on fishing vessels

PubMed Central

Uranga, Jon; Arrizabalaga, Haritz; Boyra, Guillermo; Hernandez, Maria Carmen; Goñi, Nicolas; Arregui, Igor; Fernandes, Jose A.; Yurramendi, Yosu; Santiago, Josu

2017-01-01

This study presents a methodology for the automated analysis of commercial medium-range sonar signals for detecting presence/absence of bluefin tuna (Tunnus thynnus) in the Bay of Biscay. The approach uses image processing techniques to analyze sonar screenshots. For each sonar image we extracted measurable regions and analyzed their characteristics. Scientific data was used to classify each region into a class (“tuna” or “no-tuna”) and build a dataset to train and evaluate classification models by using supervised learning. The methodology performed well when validated with commercial sonar screenshots, and has the potential to automatically analyze high volumes of data at a low cost. This represents a first milestone towards the development of acoustic, fishery-independent indices of abundance for bluefin tuna in the Bay of Biscay. Future research lines and additional alternatives to inform stock assessments are also discussed. PMID:28152032

Capability of Rolling Efficiency for 100M High-Speed Rails

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Howard

2014-03-22

OG Technologies, Inc. (OGT), along with its academic and industrial partners, proposes this CORE project for the Capability of Rolling Efficiency for 100m high-speed rails. The goal is to establish the competitive advantage, and thus the sustainability of the US-based rail manufacturers by greatly enhanced efficiency through innovative in-line metrology technology, in-depth process knowledge, and advanced process control to overcome detrimental factors such as higher labor costs that are saddling the US manufacturing sector. This Phase I project was carried out by an industrial-academia team over 9 months. The R&D team successfully completed all technical tasks and accomplished the objectivesmore » for the Phase I. In addition to the technical efforts, the introductory information of this project as well as anticipated progress was disseminated to steel mills interested in the project. The Phase I project has established the technical and commercial basis for additional development. There are needs to further completing the in-line sensing capability, deepening the capability of metamodeling, and supporting the process monitoring and control. The R&D team plans to submit a Phase II proposal based on the findings.« less

Comparison of defined culture systems for feeder cell free propagation of human embryonic stem cells

PubMed Central

Akopian, Veronika; Beil, Stephen; Benvenisty, Nissim; Brehm, Jennifer; Christie, Megan; Ford, Angela; Fox, Victoria; Gokhale, Paul J.; Healy, Lyn; Holm, Frida; Hovatta, Outi; Knowles, Barbara B.; Ludwig, Tenneille E.; McKay, Ronald D. G.; Miyazaki, Takamichi; Nakatsuji, Norio; Oh, Steve K. W.; Pera, Martin F.; Rossant, Janet; Stacey, Glyn N.; Suemori, Hirofumi

2010-01-01

There are many reports of defined culture systems for the propagation of human embryonic stem cells in the absence of feeder cell support, but no previous study has undertaken a multi-laboratory comparison of these diverse methodologies. In this study, five separate laboratories, each with experience in human embryonic stem cell culture, used a panel of ten embryonic stem cell lines (including WA09 as an index cell line common to all laboratories) to assess eight cell culture methods, with propagation in the presence of Knockout Serum Replacer, FGF-2, and mouse embryonic fibroblast feeder cell layers serving as a positive control. The cultures were assessed for up to ten passages for attachment, death, and differentiated morphology by phase contrast microscopy, for growth by serial cell counts, and for maintenance of stem cell surface marker expression by flow cytometry. Of the eight culture systems, only the control and those based on two commercial media, mTeSR1 and STEMPRO, supported maintenance of most cell lines for ten passages. Cultures grown in the remaining media failed before this point due to lack of attachment, cell death, or overt cell differentiation. Possible explanations for relative success of the commercial formulations in this study, and the lack of success with other formulations from academic groups compared to previously published results, include: the complex combination of growth factors present in the commercial preparations; improved development, manufacture, and quality control in the commercial products; differences in epigenetic adaptation to culture in vitro between different ES cell lines grown in different laboratories. PMID:20186512

Rooster Semen Cryopreservation: Effect of Pedigree Line and Male Age on Post-Thaw Sperm Function

USDA-ARS?s Scientific Manuscript database

The fertility rates of cryopreserved poultry semen are highly variable and not reliable for use in preservation of commercial genetic stocks. Our objective was to evaluate the cryosurvival of semen from 8 pedigreed layer lines at the onset and end of production. Semen from 160 roosters (20/line) was...

50 CFR 660.399 - EFH Conservation Areas off the Coast of California.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... The boundary of the Harris Point EFH Conservation Area is defined by the mean high water line and... commercial and recreational take of living marine resources is allowed, exists between the mean high water... Scorpion EFH Conservation Area is defined by the mean high water line and a straight line connecting all of...

50 CFR 660.79 - EFH Conservation Areas off the Coast of California.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... The boundary of the Harris Point EFH Conservation Area is defined by the mean high water line and... commercial and recreational take of living marine resources is allowed, exists between the mean high water... Scorpion EFH Conservation Area is defined by the mean high water line and a straight line connecting all of...

ENVIRONMENTAL TECHNOLOGY VERIFICATION: DEVELOPMENT OF A PROTOCOL FOR TESTING COMMERCIALLY PRODUCED STORMWATER TREATMENT DEVICES

EPA Science Inventory

Over the past decade, there has been an increasing array of commercially available products for the treatment of nonpoint source pollution from urban stormwater. These products incorporate various approaches to stormwater treatment such as: in-line subsurface treatment chambers...

A molecular analysis of the patterns of genetic diversity in local chickens from western Algeria in comparison with commercial lines and wild jungle fowls.

PubMed

Mahammi, F Z; Gaouar, S B S; Laloë, D; Faugeras, R; Tabet-Aoul, N; Rognon, X; Tixier-Boichard, M; Saidi-Mehtar, N

2016-02-01

The objectives of this study were to characterize the genetic variability of village chickens from three agro-ecological regions of western Algeria: coastal (CT), inland plains (IP) and highlands (HL), to reveal any underlying population structure, and to evaluate potential genetic introgression from commercial lines into local populations. A set of 233 chickens was genotyped with a panel of 23 microsatellite markers. Geographical coordinates were individually recorded. Eight reference populations were included in the study to investigate potential gene flow: four highly selected commercial pure lines and four lines of French slow-growing chickens. Two populations of wild red jungle fowls were also genotyped to compare the range of diversity between domestic and wild fowls. A genetic diversity analysis was conducted both within and between populations. Multivariate redundancy analyses were performed to assess the relative influence of geographical location among Algerian ecotypes. The results showed a high genetic variability within the Algerian population, with 184 alleles and a mean number of 8.09 alleles per locus. The values of heterozygosity (He and Ho) ranged from 0.55 to 0.62 in Algerian ecotypes and were smaller than values found in Jungle fowl populations and higher than values found in commercial populations. Although the structuring analysis of genotypes did not reveal clear subpopulations within Algerian ecotypes, the supervised approach using geographical data showed a significant (p < 0.01) differentiation between the three ecotypes which was mainly due to altitude. Thus, the genetic diversity of Algerian ecotypes may be under the influence of two factors with contradictory effects: the geographical location and climatic conditions may induce some differentiation, whereas the high level of exchanges and gene flow may suppress it. Evidence of gene flow between commercial and Algerian local populations was observed, which may be due to unrecorded crossing with commercial chickens. Chicken ecotypes from western Algeria are characterized by a high genetic diversity and must be safeguarded as an important reservoir of genetic diversity. © 2015 Blackwell Verlag GmbH.

BHD Tumor Cell Line and Renal Cell Carcinoma Line | NCI Technology Transfer Center | TTC

Cancer.gov

Scientists at the National Cancer Institute  have developed a novel renal cell carcinoma (RCC) cell line designated UOK257, which was derived from the surgical kidney tissue of a patient with hereditary Birt-Hogg-Dube''''(BHD) syndrome and companion cell line UOK257-2 in which FLCN expression has been restored by lentivirus infection. The NCI Urologic Oncology Branch seeks parties interested in licensing or collaborative research to co-develop, evaluate, or commercialize kidney cancer tumor cell lines.

Chemical Composition, Cytotoxic, Apoptotic and Antioxidant Activities of Main Commercial Essential Oils in Palestine: A Comparative Study

PubMed Central

A. Al-Tamimi, Mohammad; Rastall, Bob; M. Abu-Reidah, Ibrahim

2016-01-01

Background: Essential oils (EOs) are complex mixtures of several components gifted with a wide array of biological activities. The present research was designed to evaluate whether commercial essential oils could be effective by examining their in vitro antioxidant, cytotoxic, and apoptotic properties of nine commercially available EOs in Palestine, namely, African rue, basil, chamomile, fennel, fenugreek, ginger, spearmint, sage, and thyme, and to assure their effective use. Methods: The cytotoxic activity was determined using HT29-19(A) non-muco secreting and HT29-muco secreting (MS) cell lines. MTT, and trypan blue tests, and DPPH radical scavenging have also been assayed on the studied EOs. Results: In this work chamomile oil showed the lowest IC50 at the content of 60 µL/mL, while all other EOs reached such a decrease when 70–80 µL/mL was used on HT-29 (MS) cell lines. In HT-29 19(A) cells, 50% of viability was obtained when 80 µL/mL of ginger and African rue was used, while all other EOs needed more than 80 µL/mL to reach such a decline in viability. Otherwise, an MTT assay on HT-29 (MS) displayed ginger EO with the lowest IC50, followed by African rue and sage, with 40, 48 and 53 µL/mL, respectively. Otherwise, for the rest of the EOs, the IC50 was obtained by assaying around 80 µL/mL. Ginger showed the lowest IC50 with 60 µL/mL and thyme was the highest with 77 µL/mL when HT-29 19(A) cells were used. Conclusion: The most active EOs were found to be ginger, chamomile oil, and African rue. In general, the results demonstrate that most commercial EOs tested in this work possess low, or no biological activities; this may be due to processing, storage conditions, and handling or other reasons, which may cause losses in the biological and pharmacological properties that endemically exist in the Eos; hence, more investigation is still required on commercial EOs before they are recommended to the public. PMID:28930137

Chemical Composition, Cytotoxic, Apoptotic and Antioxidant Activities of Main Commercial Essential Oils in Palestine: A Comparative Study.

PubMed

A Al-Tamimi, Mohammad; Rastall, Bob; M Abu-Reidah, Ibrahim

2016-10-25

Background: Essential oils (EOs) are complex mixtures of several components gifted with a wide array of biological activities. The present research was designed to evaluate whether commercial essential oils could be effective by examining their in vitro antioxidant, cytotoxic, and apoptotic properties of nine commercially available EOs in Palestine, namely, African rue, basil, chamomile, fennel, fenugreek, ginger, spearmint, sage, and thyme, and to assure their effective use. Methods: The cytotoxic activity was determined using HT29-19(A) non-muco secreting and HT29-muco secreting (MS) cell lines. MTT, and trypan blue tests, and DPPH radical scavenging have also been assayed on the studied EOs. Results: In this work chamomile oil showed the lowest IC 50 at the content of 60 µL/mL, while all other EOs reached such a decrease when 70-80 µL/mL was used on HT-29 (MS) cell lines. In HT-29 19(A) cells, 50% of viability was obtained when 80 µL/mL of ginger and African rue was used, while all other EOs needed more than 80 µL/mL to reach such a decline in viability. Otherwise, an MTT assay on HT-29 (MS) displayed ginger EO with the lowest IC 50 , followed by African rue and sage, with 40, 48 and 53 µL/mL, respectively. Otherwise, for the rest of the EOs, the IC 50 was obtained by assaying around 80 µL/mL. Ginger showed the lowest IC 50 with 60 µL/mL and thyme was the highest with 77 µL/mL when HT-29 19(A) cells were used. Conclusion: The most active EOs were found to be ginger, chamomile oil, and African rue. In general, the results demonstrate that most commercial EOs tested in this work possess low, or no biological activities; this may be due to processing, storage conditions, and handling or other reasons, which may cause losses in the biological and pharmacological properties that endemically exist in the Eos; hence, more investigation is still required on commercial EOs before they are recommended to the public.

Development of a written music-recognition system using Java and open source technologies

NASA Astrophysics Data System (ADS)

Loibner, Gernot; Schwarzl, Andreas; Kovač, Matthias; Paulus, Dietmar; Pölzleitner, Wolfgang

2005-10-01

We report on the development of a software system to recognize and interpret printed music. The overall goal is to scan printed music sheets, analyze and recognize the notes, timing, and written text, and derive the all necessary information to use the computers MIDI sound system to play the music. This function is primarily useful for musicians who want to digitize printed music for editing purposes. There exist a number of commercial systems that offer such a functionality. However, on testing these systems, we were astonished on how weak they behave in their pattern recognition parts. Although we submitted very clear and rather flawless scanning input, none of these systems was able to e.g. recognize all notes, staff lines, and systems. They all require a high degree of interaction, post-processing, and editing to get a decent digital version of the hard copy material. In this paper we focus on the pattern recognition area. In a first approach we tested more or less standard methods of adaptive thresholding, blob detection, line detection, and corner detection to find the notes, staff lines, and candidate objects subject to OCR. Many of the objects on this type of material can be learned in a training phase. None of the commercial systems we saw offers the option to train special characters or unusual signatures. A second goal in this project is to use a modern software engineering platform. We were interested in how well Java and open source technologies are suitable for pattern recognition and machine vision. The scanning of music served as a case-study.

Commercial Fishing.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational Education.

This document is a curriculum framework for a program in commercial fishing to be taught in Florida secondary and postsecondary institutions. This outline covers the major concepts/content of the program, which is designed to prepare students for employment in occupations with titles such as net fishers, pot fishers, line fishers, shrimp boat…

EFFICACY OF COMMERCIAL PRODUCTS IN ENHANCING OIL BIODEGRADATION IN CLOSED LABORATORY REACTORS

EPA Science Inventory

A laboratory screening protocol was designed and conducted to test the efficacy of eight commercial bacterial cultures and two non-bacterial products in enhancing the biodegradation of weathered Alaska North Slope crude oil in closed flasks. Three lines of evidence were used to ...

The synthesis of active pharmaceutical ingredients (APIs) using continuous flow chemistry

PubMed Central

2015-01-01

Summary The implementation of continuous flow processing as a key enabling technology has transformed the way we conduct chemistry and has expanded our synthetic capabilities. As a result many new preparative routes have been designed towards commercially relevant drug compounds achieving more efficient and reproducible manufacture. This review article aims to illustrate the holistic systems approach and diverse applications of flow chemistry to the preparation of pharmaceutically active molecules, demonstrating the value of this strategy towards every aspect ranging from synthesis, in-line analysis and purification to final formulation and tableting. Although this review will primarily concentrate on large scale continuous processing, additional selected syntheses using micro or meso-scaled flow reactors will be exemplified for key transformations and process control. It is hoped that the reader will gain an appreciation of the innovative technology and transformational nature that flow chemistry can leverage to an overall process. PMID:26425178

The synthesis of active pharmaceutical ingredients (APIs) using continuous flow chemistry.

PubMed

Baumann, Marcus; Baxendale, Ian R

2015-01-01

The implementation of continuous flow processing as a key enabling technology has transformed the way we conduct chemistry and has expanded our synthetic capabilities. As a result many new preparative routes have been designed towards commercially relevant drug compounds achieving more efficient and reproducible manufacture. This review article aims to illustrate the holistic systems approach and diverse applications of flow chemistry to the preparation of pharmaceutically active molecules, demonstrating the value of this strategy towards every aspect ranging from synthesis, in-line analysis and purification to final formulation and tableting. Although this review will primarily concentrate on large scale continuous processing, additional selected syntheses using micro or meso-scaled flow reactors will be exemplified for key transformations and process control. It is hoped that the reader will gain an appreciation of the innovative technology and transformational nature that flow chemistry can leverage to an overall process.

Passive Fuel Tank Inerting Systems for Ground Combat Vehicles

DTIC Science & Technology

1988-09-01

elastomers and sealants used in currently fielded equipment and redesign of selected hydraulic and gun recoil systems would be necessary to...constraint~s or access problems. "* Fuel Lines.- Fuel lines are routed to use the least amount of line possible. Fuel lines are high-pressure braided ...steel and rubber hose or steel tube construction. "* Fuel Pumps. Fuel pumps are usually mounted internal to the fuel tanks, are of heavy-duty commercial

Sensing textile seam-line for wearable multimodal physiological monitoring.

PubMed

McKnight, M; Agcayazi, T; Kausche, H; Ghosh, T; Bozkurt, A

2016-08-01

This paper investigates a novel multimodal sensing method by forming seam-lines of conductive textile fibers into commercially available fabrics. The proposed ultra-low cost micro-electro-mechanical sensor would provide, wearable, flexible, textile based biopotential signal recording, wetness detection and tactile sensing simultaneously. Three types of fibers are evaluated for their array-based sensing capability, including a 3D printed conductive fiber, a multiwall carbon nanotube based fiber, and a commercially available stainless steel conductive thread. The sensors were shown to have a correlation between capacitance and pressure; impedance and wetness; and recorded potential and ECG waveforms.

Note: A simple sample transfer alignment for ultra-high vacuum systems.

PubMed

Tamtögl, A; Carter, E A; Ward, D J; Avidor, N; Kole, P R; Jardine, A P; Allison, W

2016-06-01

The alignment of ultra-high-vacuum sample transfer systems can be problematic when there is no direct line of sight to assist the user. We present the design of a simple and cheap system which greatly simplifies the alignment of sample transfer devices. Our method is based on the adaptation of a commercial digital camera which provides live views from within the vacuum chamber. The images of the camera are further processed using an image recognition and processing code which determines any misalignments and reports them to the user. Installation has proven to be extremely useful in order to align the sample with respect to the transfer mechanism. Furthermore, the alignment software can be easily adapted for other systems.

On-line process analysis innovation: DiComp (tm) shunting dielectric sensor technology

NASA Technical Reports Server (NTRS)

Davis, Craig R.; Waldman, Frank A.

1993-01-01

The DiComp Shunting Dielectric Sensor (SDS) is a new patent-pending technology developed under the Small Business Innovation Research Program (SBIR) for NASA's Kennedy Space Center. The incorporation of a shunt electrode into a conventional fringing field dielectric sensor makes the SDS uniquely sensitive to changes in material dielectric properties in the KHz to MHz range which were previously detectable only at GHz measurement frequencies. The initial NASA application of the SDS for Nutrient Delivery Control has demonstrated SDS capabilities for thickness and concentration measurement of Hoagland nutrient solutions. The commercial introduction of DiComp SDS technology for concentration and percent solids measurements in dispersions, emulsions and solutions represents a new technology for process measurements for liquids in a variety of industries.

Spectroscopic On-Line Monitoring of Cu/W Contacts Erosion in HVCBs Using Optical-Fibre Based Sensor and Chromatic Methodology

PubMed Central

Wang, Zhixiang; Jones, Gordon R.; Spencer, Joseph W.; Wang, Xiaohua; Rong, Mingzhe

2017-01-01

Contact erosion is one of the most crucial factors affecting the electrical service lifetime of high-voltage circuit breakers (HVCBs). On-line monitoring the contacts’ erosion degree is increasingly in demand for the sake of condition based maintenance to guarantee the functional operation of HVCBs. A spectroscopic monitoring system has been designed based upon a commercial 245 kV/40 kA SF6 live tank circuit breaker with copper–tungsten (28 wt % and 72 wt %) arcing contacts at atmospheric SF6 pressure. Three optical-fibre based sensors are used to capture the time-resolved spectra of arcs. A novel approach using chromatic methods to process the time-resolved spectral signal has been proposed. The processed chromatic parameters have been interpreted to show that the time variation of spectral emission from the contact material and quenching gas are closely correlated to the mass loss and surface degradation of the plug arcing contact. The feasibility of applying this method to online monitoring of contact erosion is indicated. PMID:28272295

Spectroscopic On-Line Monitoring of Cu/W Contacts Erosion in HVCBs Using Optical-Fibre Based Sensor and Chromatic Methodology.

PubMed

Wang, Zhixiang; Jones, Gordon R; Spencer, Joseph W; Wang, Xiaohua; Rong, Mingzhe

2017-03-06

Contact erosion is one of the most crucial factors affecting the electrical service lifetime of high-voltage circuit breakers (HVCBs). On-line monitoring the contacts' erosion degree is increasingly in demand for the sake of condition based maintenance to guarantee the functional operation of HVCBs. A spectroscopic monitoring system has been designed based upon a commercial 245 kV/40 kA S F 6 live tank circuit breaker with copper-tungsten (28 wt % and 72 wt %) arcing contacts at atmospheric S F 6 pressure. Three optical-fibre based sensors are used to capture the time-resolved spectra of arcs. A novel approach using chromatic methods to process the time-resolved spectral signal has been proposed. The processed chromatic parameters have been interpreted to show that the time variation of spectral emission from the contact material and quenching gas are closely correlated to the mass loss and surface degradation of the plug arcing contact. The feasibility of applying this method to online monitoring of contact erosion is indicated.

Distribution of trace elements in a modified and grain refined aluminium-silicon hypoeutectic alloy.

PubMed

Faraji, M; Katgerman, L

2010-08-01

The influence of modifier and grain refiner on the nucleation process of a commercial hypoeutectic Al-Si foundry alloy (A356) was investigated using optical microscopy, scanning electron microscopy (SEM) and electron probe microanalysis technique (EPMA). Filtering was used to improve the casting quality; however, it compromised the modification of silicon. Effect of filtering on strontium loss was also studied using the afore-mentioned techniques. EPMA was used to trace the modifying and grain refining agents inside matrix and eutectic Si. This was to help understanding mechanisms of nucleation and modification in this alloy. Using EPMA, the negative interaction of Sr and Al3TiB was closely examined. In modified structure, it was found that the maximum point of Sr concentration was in line with peak of silicon; however, in case of just 0.1wt% added Ti, the peak of Ti concentration was not in line with aluminium, (but it was close to Si peak). Furthermore, EPMA results showed that using filter during casting process lowered the strontium content, although produced a cleaner melt. (c) 2010 Elsevier Ltd. All rights reserved.

A 32 x 32 capacitive micromachined ultrasonic transducer array manufactured in standard CMOS.

PubMed

Lemmerhirt, David F; Cheng, Xiaoyang; White, Robert; Rich, Collin A; Zhang, Man; Fowlkes, J Brian; Kripfgans, Oliver D

2012-07-01

As ultrasound imagers become increasingly portable and lower cost, breakthroughs in transducer technology will be needed to provide high-resolution, real-time 3-D imaging while maintaining the affordability needed for portable systems. This paper presents a 32 x 32 ultrasound array prototype, manufactured using a CMUT-in-CMOS approach whereby ultrasonic transducer elements and readout circuits are integrated on a single chip using a standard integrated circuit manufacturing process in a commercial CMOS foundry. Only blanket wet-etch and sealing steps are added to complete the MEMS devices after the CMOS process. This process typically yields better than 99% working elements per array, with less than ±1.5 dB variation in receive sensitivity among the 1024 individually addressable elements. The CMUT pulseecho frequency response is typically centered at 2.1 MHz with a -6 dB fractional bandwidth of 60%, and elements are arranged on a 250 μm hexagonal grid (less than half-wavelength pitch). Multiplexers and CMOS buffers within the array are used to make on-chip routing manageable, reduce the number of physical output leads, and drive the transducer cable. The array has been interfaced to a commercial imager as well as a set of custom transmit and receive electronics, and volumetric images of nylon fishing line targets have been produced.

75 FR 6318 - Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Coastal Migratory Pelagic...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-09

...: Temporary rule; trip limit reduction. SUMMARY: NMFS reduces the trip limit in the commercial hook-and-line... separate quotas. The quota for the hook-and-line fishery in the southern Florida west coast subzone is 520...), from the date that 75 percent of the southern Florida west coast subzone's hook-and- line gear quota...

50 CFR 622.44 - Commercial trip limits.

Code of Federal Regulations, 2012 CFR

2012-10-01

... been issued. (B) Hook-and-line gear. In the Florida west coast subzone, king mackerel in or from the... required by § 622.4(a)(2)(iii), and operating under the hook-and-line gear quotas in § 622.42(c)(1)(i)(A)(2... northern or southern subzone's hook-and-line gear quota has been harvested—in amounts not exceeding 1,250...

50 CFR 622.44 - Commercial trip limits.

Code of Federal Regulations, 2011 CFR

2011-10-01

... been issued. (B) Hook-and-line gear. In the Florida west coast subzone, king mackerel in or from the... required by § 622.4(a)(2)(iii), and operating under the hook-and-line gear quotas in § 622.42(c)(1)(i)(A)(2... northern or southern subzone's hook-and-line gear quota has been harvested—in amounts not exceeding 1,250...

Effects of Repeated Social Disruption on the Serotonergic and Dopaminergic Systems in two Genetic Lines of White Leghorn Layers

USDA-ARS?s Scientific Manuscript database

The study was designed to examine whether there are genetic differences in response to repeated social disruption (RSD). Two genetic strains of White Leghorn hens were used in the study; i.e., HGPS (the line selected for high group production and survivability), and DXL (DeKalb XL commercial line). ...

An improved automotive brake lining using fibrous potassium titanate

NASA Technical Reports Server (NTRS)

Mansfield, J. A.; Halberstadt, M. L.; Riccitiello, S. R.; Rhee, S. K.

1976-01-01

Simultaneous fade reduction and wear improvement of a commercial automotive brake lining were achieved by adding fibrous potassium titanate. The dependence of friction and wear characteristics on quantitative variations in potassium titanate, asbestos, phenolic binder, and organic and inorganic modifiers was evaluated.

High-performance camera module for fast quality inspection in industrial printing applications

NASA Astrophysics Data System (ADS)

Fürtler, Johannes; Bodenstorfer, Ernst; Mayer, Konrad J.; Brodersen, Jörg; Heiss, Dorothea; Penz, Harald; Eckel, Christian; Gravogl, Klaus; Nachtnebel, Herbert

2007-02-01

Today, printing products which must meet highest quality standards, e.g., banknotes, stamps, or vouchers, are automatically checked by optical inspection systems. Typically, the examination of fine details of the print or security features demands images taken from various perspectives, with different spectral sensitivity (visible, infrared, ultraviolet), and with high resolution. Consequently, the inspection system is equipped with several cameras and has to cope with an enormous data rate to be processed in real-time. Hence, it is desirable to move image processing tasks into the camera to reduce the amount of data which has to be transferred to the (central) image processing system. The idea is to transfer relevant information only, i.e., features of the image instead of the raw image data from the sensor. These features are then further processed. In this paper a color line-scan camera for line rates up to 100 kHz is presented. The camera is based on a commercial CMOS (complementary metal oxide semiconductor) area image sensor and a field programmable gate array (FPGA). It implements extraction of image features which are well suited to detect print flaws like blotches of ink, color smears, splashes, spots and scratches. The camera design and several image processing methods implemented on the FPGA are described, including flat field correction, compensation of geometric distortions, color transformation, as well as decimation and neighborhood operations.

High-throughput miniaturized bioreactors for cell culture process development: reproducibility, scalability, and control.

PubMed

Rameez, Shahid; Mostafa, Sigma S; Miller, Christopher; Shukla, Abhinav A

2014-01-01

Decreasing the timeframe for cell culture process development has been a key goal toward accelerating biopharmaceutical development. Advanced Microscale Bioreactors (ambr™) is an automated micro-bioreactor system with miniature single-use bioreactors with a 10-15 mL working volume controlled by an automated workstation. This system was compared to conventional bioreactor systems in terms of its performance for the production of a monoclonal antibody in a recombinant Chinese Hamster Ovary cell line. The miniaturized bioreactor system was found to produce cell culture profiles that matched across scales to 3 L, 15 L, and 200 L stirred tank bioreactors. The processes used in this article involve complex feed formulations, perturbations, and strict process control within the design space, which are in-line with processes used for commercial scale manufacturing of biopharmaceuticals. Changes to important process parameters in ambr™ resulted in predictable cell growth, viability and titer changes, which were in good agreement to data from the conventional larger scale bioreactors. ambr™ was found to successfully reproduce variations in temperature, dissolved oxygen (DO), and pH conditions similar to the larger bioreactor systems. Additionally, the miniature bioreactors were found to react well to perturbations in pH and DO through adjustments to the Proportional and Integral control loop. The data presented here demonstrates the utility of the ambr™ system as a high throughput system for cell culture process development. © 2014 American Institute of Chemical Engineers.

Children's Commercials: Creative Development

ERIC Educational Resources Information Center

Rust, Langbourne; Watkins, Thomas A.

1975-01-01

Describes the implications of research designed to focus on within-commercial differences, use a variety of response measures, employ a non-reactive viewing situation, measure behavioral as well as verbal responses, and provide data that creative people can understand. Action and story line were found to be the most important aspects that hold…

Susceptibility to keel bone fractures in laying hens and the role of genetic variation.

PubMed

Candelotto, Laura; Stratmann, Ariane; Gebhardt-Henrich, Sabine G; Rufener, Christina; van de Braak, Teun; Toscano, Michael J

2017-10-01

Keel bone fractures are a well-known welfare problem in modern commercial laying hen systems. The present study sought to identify genetic variation in relation to keel bone fracture susceptibility of 4 distinct crossbred and one pure line, and by extension, possible breeding traits. Susceptibility to fractures were assessed using an ex vivo impact testing protocol in combination with a study design that minimized environmental variation to focus on genetic differences. The 5 crossbred/pure lines differed in their susceptibility to keel bone fractures with the greatest likelihood of fracture in one of the 3 commercial lines and the lowest susceptibility to fractures in one of the experimental lines. Egg production at the hen-level did not differ between the crossbred/pure lines (P > 0.05), though an increased susceptibility to keel bone fractures was associated with thinner eggshells and reduced egg breaking strength, a pattern consistent among all tested crossbred/pure lines. Our findings suggest an association between egg quality and bone strength which appeared to be independent of crossbred/pure line. The findings indicate the benefit of the impact methodology to identify potential breeding characteristics to reduce incidence of keel fracture as well as the potential relationship with eggshell quality. © 2017 Poultry Science Association Inc.

Verification of a Finite Element Model for Pyrolyzing Ablative Materials

NASA Technical Reports Server (NTRS)

Risch, Timothy K.

2017-01-01

Ablating thermal protection system (TPS) materials have been used in many reentering spacecraft and in other applications such as rocket nozzle linings, fire protection materials, and as countermeasures for directed energy weapons. The introduction of the finite element model to the analysis of ablation has arguably resulted in improved computational capabilities due the flexibility and extended applicability of the method, especially to complex geometries. Commercial finite element codes often provide enhanced capability compared to custom, specially written programs based on versatility, usability, pre- and post-processing, grid generation, total life-cycle costs, and speed.

7 CFR 1000.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1000.19... FEDERAL MILK MARKETING ORDERS Definitions § 1000.19 Commercial food processing establishment. Commercial food processing establishment means any facility, other than a milk plant, to which fluid milk products...

7 CFR 1000.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1000.19... FEDERAL MILK MARKETING ORDERS Definitions § 1000.19 Commercial food processing establishment. Commercial food processing establishment means any facility, other than a milk plant, to which fluid milk products...

7 CFR 1000.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1000.19... FEDERAL MILK MARKETING ORDERS Definitions § 1000.19 Commercial food processing establishment. Commercial food processing establishment means any facility, other than a milk plant, to which fluid milk products...

7 CFR 1000.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1000.19... FEDERAL MILK MARKETING ORDERS Definitions § 1000.19 Commercial food processing establishment. Commercial food processing establishment means any facility, other than a milk plant, to which fluid milk products...

7 CFR 1000.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1000.19... FEDERAL MILK MARKETING ORDERS Definitions § 1000.19 Commercial food processing establishment. Commercial food processing establishment means any facility, other than a milk plant, to which fluid milk products...

A Performance-Based Comparison of Object-Oriented Simulation Tools

DTIC Science & Technology

1992-04-01

simulation" [Belanger 90a, 90b]. CACI Products Company markets MODSIM II as the commercial version of ModSim, which was created on a US Army contract...aim fprintf (report_file, "Line Statistics\\ nLine teller repoirt.cust interrupts; Lengt~is\

Automatic micropropagation of plants

NASA Astrophysics Data System (ADS)

Otte, Clemens; Schwanke, Joerg; Jensch, Peter F.

1996-12-01

Micropropagation is a sophisticated technique for the rapid multiplication of plants. It has a great commercial potential due to the speed of propagation, the high plant quality, and the ability to produce disease-free plants. However, micropropagation is usually done by hand which makes the process cost-intensive and tedious for the workers especially because it requires a sterile work-place. Therefore, we have developed a prototype automation system for the micropropagation of a grass species (miscanthus sinensis gigantheus). The objective of this paper is to describe the robotic system in an overview and to discuss the vision system more closely including the implemented morphological operations recognizing the cutting and gripping points of miscanthus plants. Fuzzy controllers are used to adapt the parameters of image operations on-line to each individual plant. Finally, we discuss our experiences with the developed prototype an give a preview of a possible real production line system.

Thin blue lines: product placement and the drama of pregnancy testing in British cinema and television.

PubMed

Olszynko-Gryn, Jesse

2017-09-01

This article uses the case of pregnancy testing in Britain to investigate the process whereby new and often controversial reproductive technologies are made visible and normalized in mainstream entertainment media. It shows how in the 1980s and 1990s the then nascent product placement industry was instrumental in embedding pregnancy testing in British cinema and television's dramatic productions. In this period, the pregnancy-test close-up became a conventional trope and the thin blue lines associated with Unilever's Clearblue rose to prominence in mainstream consumer culture. This article investigates the aestheticization of pregnancy testing and shows how increasingly visible public concerns about 'schoolgirl mums', abortion and the biological clock, dramatized on the big and small screen, propelled the commercial rise of Clearblue. It argues that the Clearblue close-up ambiguously concealed as much as it revealed; abstraction, ambiguity and flexibility were its keys to success.

Supra-physiological folic acid concentrations induce aberrant DNA methylation in normal human cells in vitro.

PubMed

Charles, Michelle A; Johnson, Ian T; Belshaw, Nigel J

2012-07-01

The micronutrients folate and selenium may modulate DNA methylation patterns by affecting intracellular levels of the methyl donor S-adenosylmethionine (SAM) and/or the product of methylation reactions S-adenosylhomocysteine (SAH). WI-38 fibroblasts and FHC colon epithelial cells were cultured in the presence of two forms of folate or four forms of selenium at physiologically-relevant doses, and their effects on LINE-1 methylation, gene-specific CpG island (CGI) methylation and intracellular SAM:SAH were determined. At physiologically-relevant doses the forms of folate or selenium had no effect on LINE-1 or CGI methylation, nor on intracellular SAM:SAH. However the commercial cell culture media used for the selenium studies, containing supra-physiological concentrations of folic acid, induced LINE-1 hypomethylation, CGI hypermethylation and decreased intracellular SAM:SAH in both cell lines. We conclude that the exposure of normal human cells to supra-physiological folic acid concentrations present in commercial cell culture media perturbs the intracellular SAM:SAH ratio and induces aberrant DNA methylation.

The direct liquefaction proof of concept program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Comolli, A.G.; Lee, L.K.; Pradhan, V.R.

1995-12-31

The goal of the Proof of Concept (POC) Program is to develop Direct Coal Liquefaction and associated transitional technologies towards commercial readiness for economically producing premium liquid fuels from coal in an environmentally acceptable manner. The program focuses on developing the two-stage liquefaction (TSL) process by utilizing geographically strategic feedstocks, commercially feasible catalysts, new prototype equipment, and testing co-processing or alternate feedstocks and improved process configurations. Other high priority objectives include dispersed catalyst studies, demonstrating low rank coal liquefaction without solids deposition, improving distillate yields on a unit reactor volume basis, demonstrating ebullated bed operations while obtaining scale-up data, demonstratingmore » optimum catalyst consumption using new concepts (e.g. regeneration, cascading), producing premium products through on-line hydrotreating, demonstrating improved hydrogen utilization for low rank coals using novel heteroatom removal methods, defining and demonstrating two-stage product properties for upgrading; demonstrating efficient and economic solid separation methods, examining the merits of integrated coal cleaning, demonstrating co-processing, studying interactions between the preheater and first and second-stage reactors, improving process operability by testing and incorporating advanced equipment and instrumentation, and demonstrating operation with alternate coal feedstocks. During the past two years major PDU Proof of Concept runs were completed. POC-1 with Illinois No. 6 coal and POC-2 with Black Thunder sub-bituminous coal. Results from these operations are continuing under review and the products are being further refined and upgraded. This paper will update the results from these operations and discuss future plans for the POC program.« less

Intelligent Extruder

DOE Office of Scientific and Technical Information (OSTI.GOV)

AlperEker; Mark Giammattia; Paul Houpt

''Intelligent Extruder'' described in this report is a software system and associated support services for monitoring and control of compounding extruders to improve material quality, reduce waste and energy use, with minimal addition of new sensors or changes to the factory floor system components. Emphasis is on process improvements to the mixing, melting and de-volatilization of base resins, fillers, pigments, fire retardants and other additives in the :finishing'' stage of high value added engineering polymer materials. While GE Plastics materials were used for experimental studies throughout the program, the concepts and principles are broadly applicable to other manufacturers materials. Themore » project involved a joint collaboration among GE Global Research, GE Industrial Systems and Coperion Werner & Pleiderer, USA, a major manufacturer of compounding equipment. Scope of the program included development of a algorithms for monitoring process material viscosity without rheological sensors or generating waste streams, a novel detection scheme for rapid detection of process upsets and an adaptive feedback control system to compensate for process upsets where at line adjustments are feasible. Software algorithms were implemented and tested on a laboratory scale extruder (50 lb/hr) at GE Global Research and data from a production scale system (2000 lb/hr) at GE Plastics was used to validate the monitoring and detection software. Although not evaluated experimentally, a new concept for extruder process monitoring through estimation of high frequency drive torque without strain gauges is developed and demonstrated in simulation. A plan to commercialize the software system is outlined, but commercialization has not been completed.« less

Effects of retail style or food service style packaging type and storage time on sensory characteristics of bacon manufactured from commercially sourced pork bellies.

PubMed

Lowe, B K; Bohrer, B M; Holmer, S F; Boler, D D; Dilger, A C

2014-06-01

Objectives were to characterize differences in pork bellies that were stored frozen for different durations prior to processing and characterize sensory properties of the bacon derived from those bellies when stored in either retail or food service style packaging. Bellies (n = 102) were collected from 4 different time periods, fresh bellies (never frozen) and bellies frozen for 2, 5, or 7 mo, and manufactured into bacon under commercial conditions. Food service bacon was packaged in oxygen-permeable polyvinyl lined boxes layered on wax-covered lined paper and blast frozen (-33 °C) for 45 or 90 d after slicing. Retail bacon was vacuum-packaged in retail packages and refrigerated (2 °C) in the dark for 60 or 120 d after slicing. At the end of respective storage times after slicing, bacon was analyzed for sensory attributes and lipid oxidation. Off-flavor and oxidized odor of bacon increased (P < 0.01) with increasing storage time in both packaging types. Lipid oxidation increased (P < 0.01) as storage time increased from day 0 to day 45 in food service packaged bacon from frozen bellies, but was unchanged (P ≥ 0.07) with time in food service packaged bacon from fresh bellies. Lipid oxidation was also unchanged (P ≥ 0.21) over time in retail packaged bacon, with the exception of bellies frozen for 5 mo, which was increased from day 0 to day 90. Overall, off-flavor, oxidized odor, and lipid oxidation increased as storage time after processing increased. Freezing bellies before processing may exacerbate lipid oxidation as storage time after processing was extended. Bacon can be packaged and managed several different ways before it reaches the consumer. This research simulated food service (frozen) and retail packaged (refrigerated) bacon over a range of storage times after slicing. Off-flavor and oxidized odor increased as storage time after processing increased in both packaging types. Lipid oxidation increased as storage time after slicing increased to a greater extent in food service packaging. © 2014 Institute of Food Technologists®

41 CFR 102-192.55 - Why must we use these commercial payment processes?

Code of Federal Regulations, 2013 CFR

2013-07-01

... commercial payment processes? 102-192.55 Section 102-192.55 Public Contracts and Property Management Federal... 192-MAIL MANAGEMENT Financial Requirements for All Agencies § 102-192.55 Why must we use these commercial payment processes? Federal agencies are required to use commercial payment processes because...

41 CFR 102-192.55 - Why must we use these commercial payment processes?

Code of Federal Regulations, 2014 CFR

2014-01-01

... commercial payment processes? 102-192.55 Section 102-192.55 Public Contracts and Property Management Federal... 192-MAIL MANAGEMENT Financial Requirements for All Agencies § 102-192.55 Why must we use these commercial payment processes? Federal agencies are required to use commercial payment processes because...

41 CFR 102-192.55 - Why must we use these commercial payment processes?

Code of Federal Regulations, 2012 CFR

2012-01-01

... commercial payment processes? 102-192.55 Section 102-192.55 Public Contracts and Property Management Federal... 192-MAIL MANAGEMENT Financial Requirements for All Agencies § 102-192.55 Why must we use these commercial payment processes? Federal agencies are required to use commercial payment processes because...

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

Anticancer and enhanced antimicrobial activity of biosynthesizd silver nanoparticles against clinical pathogens

NASA Astrophysics Data System (ADS)

Rajeshkumar, Shanmugam; Malarkodi, Chelladurai; Vanaja, Mahendran; Annadurai, Gurusamy

2016-07-01

The present investigation shows the biosynthesis of eco-friendly silver nanoparticles using culture supernatant of Enterococcus sp. and study the effect of enhanced antimicrobial activity, anticancer activity against pathogenic bacteria, fungi and cancer cell lines. Silver nanoparticles was synthesized by adding 1 mM silver nitrate into the 100 ml of 24 h freshly prepared culture supernatant of Enterococcus sp. and were characterized by UV-vis spectroscopy, X-ray diffraction (XRD), Transmission Electron Microscope (TEM), Selected Area Diffraction X-Ray (SAED), Energy Dispersive X Ray (EDX) and Fourier Transform Infra red Spectroscopy (FT-IR). The synthesized silver nanoparticles were impregnated with commercial antibiotics for evaluation of enhanced antimicrobial activity. Further these synthesized silver nanoparticles were assessed for its anticancer activity against cancer cell lines. In this study crystalline structured nanoparticles with spherical in the size ranges from 10 to 80 nm and it shows excellent enhanced antimicrobial activity than the commercial antibiotics. The in vitro assay of silver nanoparticles on anticancer have great potential to inhibit the cell viability. Amide linkages and carboxylate groups of proteins from Enterococcus sp. may bind with silver ions and convert into nanoparticles. The activities of commercial antibiotics were enhanced by coating silver nanoparticles shows significant improved antimicrobial activity. Silver nanoparticles have the great potential to inhibit the cell viability of liver cancer cells lines (HepG2) and lung cancer cell lines (A549).

Variation of meat quality traits among five genotypes of chicken.

PubMed

Tang, H; Gong, Y Z; Wu, C X; Jiang, J; Wang, Y; Li, K

2009-10-01

The main objective of this study was to examine the diversity of meat quality traits among 5 chicken genotypes. The genotypes included 2 Chinese native breeds (Wenchang,WCH, and Xianju), 1 commercial broiler line (Avian, AV), 1 commercial layer line (Hy-Line Brown, HLB), and 1 Chinese commercial broiler line (Lingnanhuang, LNH) synthesized by exotic and native breeds, which were slaughtered at their market ages: 16, 7, 16, and 8 wk, respectively. The effects of genotype, muscle type, and sex on meat quality traits were examined. Birds from slow-growing genotypes (WCH, Xianju, and HLB) exhibited higher shear value, inosine-5'-monophosphate concentration, lower cook loss, and more fat than those from fast-growing genotypes (AV and LNH). Chickens from WCH possessed the lowest expressible moisture, cook loss, and the highest lipid (%) among the 3 slow-growing genotypes. The HLB birds were intermediate in expressible moisture and cook loss and lowest in lipid among all genotypes. The LNH cross birds were similar to AV broilers in most meat quality parameters, although they had a lower shear force value and higher fat content than AV broilers. Breast muscle had higher expressible moisture, shear force, protein (%), inosine-5'-monophosphate content, lower cook loss, and lipid (%) than leg muscle. Muscles from male chickens had higher expressible moisture than those from the females. Variability of meat quality characteristics is mainly related to genotype and muscle type differences.

Exposure to Cobalt Causes Transcriptomic and Proteomic Changes in Two Rat Liver Derived Cell Lines

PubMed Central

Permenter, Matthew G.; Dennis, William E.; Sutto, Thomas E.; Jackson, David A.; Lewis, John A.; Stallings, Jonathan D.

2013-01-01

Cobalt is a transition group metal present in trace amounts in the human diet, but in larger doses it can be acutely toxic or cause adverse health effects in chronic exposures. Its use in many industrial processes and alloys worldwide presents opportunities for occupational exposures, including military personnel. While the toxic effects of cobalt have been widely studied, the exact mechanisms of toxicity remain unclear. In order to further elucidate these mechanisms and identify potential biomarkers of exposure or effect, we exposed two rat liver-derived cell lines, H4-II-E-C3 and MH1C1, to two concentrations of cobalt chloride. We examined changes in gene expression using DNA microarrays in both cell lines and examined changes in cytoplasmic protein abundance in MH1C1 cells using mass spectrometry. We chose to closely examine differentially expressed genes and proteins changing in abundance in both cell lines in order to remove cell line specific effects. We identified enriched pathways, networks, and biological functions using commercial bioinformatic tools and manual annotation. Many of the genes, proteins, and pathways modulated by exposure to cobalt appear to be due to an induction of a hypoxic-like response and oxidative stress. Genes that may be differentially expressed due to a hypoxic-like response are involved in Hif-1α signaling, glycolysis, gluconeogenesis, and other energy metabolism related processes. Gene expression changes linked to oxidative stress are also known to be involved in the NRF2-mediated response, protein degradation, and glutathione production. Using microarray and mass spectrometry analysis, we were able to identify modulated genes and proteins, further elucidate the mechanisms of toxicity of cobalt, and identify biomarkers of exposure and effect in vitro, thus providing targets for focused in vivo studies. PMID:24386269

New ultraportable display technology and applications

NASA Astrophysics Data System (ADS)

Alvelda, Phillip; Lewis, Nancy D.

1998-08-01

MicroDisplay devices are based on a combination of technologies rooted in the extreme integration capability of conventionally fabricated CMOS active-matrix liquid crystal display substrates. Customized diffraction grating and optical distortion correction technology for lens-system compensation allow the elimination of many lenses and systems-level components. The MicroDisplay Corporation's miniature integrated information display technology is rapidly leading to many new defense and commercial applications. There are no moving parts in MicroDisplay substrates, and the fabrication of the color generating gratings, already part of the CMOS circuit fabrication process, is effectively cost and manufacturing process-free. The entire suite of the MicroDisplay Corporation's technologies was devised to create a line of application- specific integrated circuit single-chip display systems with integrated computing, memory, and communication circuitry. Next-generation portable communication, computer, and consumer electronic devices such as truly portable monitor and TV projectors, eyeglass and head mounted displays, pagers and Personal Communication Services hand-sets, and wristwatch-mounted video phones are among the may target commercial markets for MicroDisplay technology. Defense applications range from Maintenance and Repair support, to night-vision systems, to portable projectors for mobile command and control centers.

Robust In-Flight Sensor Fault Diagnostics for Aircraft Engine Based on Sliding Mode Observers

PubMed Central

Chang, Xiaodong; Huang, Jinquan; Lu, Feng

2017-01-01

For a sensor fault diagnostic system of aircraft engines, the health performance degradation is an inevitable interference that cannot be neglected. To address this issue, this paper investigates an integrated on-line sensor fault diagnostic scheme for a commercial aircraft engine based on a sliding mode observer (SMO). In this approach, one sliding mode observer is designed for engine health performance tracking, and another for sensor fault reconstruction. Both observers are employed in in-flight applications. The results of the former SMO are analyzed for post-flight updating the baseline model of the latter. This idea is practical and feasible since the updating process does not require the algorithm to be regulated or redesigned, so that ground-based intervention is avoided, and the update process is implemented in an economical and efficient way. With this setup, the robustness of the proposed scheme to the health degradation is much enhanced and the latter SMO is able to fulfill sensor fault reconstruction over the course of the engine life. The proposed sensor fault diagnostic system is applied to a nonlinear simulation of a commercial aircraft engine, and its effectiveness is evaluated in several fault scenarios. PMID:28398255

Robust In-Flight Sensor Fault Diagnostics for Aircraft Engine Based on Sliding Mode Observers.

PubMed

Chang, Xiaodong; Huang, Jinquan; Lu, Feng

2017-04-11

For a sensor fault diagnostic system of aircraft engines, the health performance degradation is an inevitable interference that cannot be neglected. To address this issue, this paper investigates an integrated on-line sensor fault diagnostic scheme for a commercial aircraft engine based on a sliding mode observer (SMO). In this approach, one sliding mode observer is designed for engine health performance tracking, and another for sensor fault reconstruction. Both observers are employed in in-flight applications. The results of the former SMO are analyzed for post-flight updating the baseline model of the latter. This idea is practical and feasible since the updating process does not require the algorithm to be regulated or redesigned, so that ground-based intervention is avoided, and the update process is implemented in an economical and efficient way. With this setup, the robustness of the proposed scheme to the health degradation is much enhanced and the latter SMO is able to fulfill sensor fault reconstruction over the course of the engine life. The proposed sensor fault diagnostic system is applied to a nonlinear simulation of a commercial aircraft engine, and its effectiveness is evaluated in several fault scenarios.

Harvest patterns and effort dynamics of indigenous and non-indigenous commercial sectors of the eastern Torres Strait reef line fishery

NASA Astrophysics Data System (ADS)

Williams, Ashley J.; Ballagh, Aaron C.; Begg, Gavin A.; Murchie, Cameron D.; Currey, Leanne M.

2008-09-01

The reef line fishery (RLF) in eastern Torres Strait (ETS) is unique in that it has both a commercial indigenous sector and a commercial non-indigenous sector. Recently, concerns have been expressed by all stakeholders about the long-term sustainability of the fishery. These concerns have been exacerbated by the lack of detailed catch and effort information from both sectors, which has precluded any formal assessment of the fishery. In this paper, we characterise the harvest patterns and effort dynamics of the indigenous and non-indigenous commercial sectors of the ETS RLF using a range of data sources including commercial logbooks, community freezer records, voluntary logbooks and observer surveys. We demonstrate that bycatch is a significant component of the catch for both sectors and identify substantial differences in harvest patterns and effort dynamics between the sectors. Differences between sectors were observed in species composition and spatial and temporal patterns in catch, effort and catch per unit effort. These results highlight the inherent variation in catch and effort dynamics between the two commercial sectors of the ETS RLF and provide valuable information for the development of future assessments and appropriate management strategies for the fishery. The more reliable estimates of harvest patterns and effort dynamics for both sectors obtained from observer surveys will also assist in resolving issues relating to allocation of reef fish resources in Torres Strait.

Trauma and its aftermath for commercially sexually exploited women as told by front-line service providers.

PubMed

Hom, Kristin A; Woods, Stephanie J

2013-02-01

Commercial sexual exploitation of women and girls through forced prostitution and sex-trafficking is a human rights and public health issue, with survivors facing complex mental health problems from trauma and violence. An international and domestic problem, the average age of recruitment into sex-trafficking is between 11 and 14 years old. Given its secrecy and brutality, such exploitation remains difficult to study, which results in a lack of knowledge related to trauma and how best to develop specific services that effectively engage and meet the unique needs of survivors. This qualitative research, using thematic analysis, explored the stories of trauma and its aftermath for commercially sexually exploited women as told by front-line service providers. Three themes emerged regarding the experience of sex-trafficking and its outcomes-Pimp Enculturation, Aftermath, and Healing the Wound-along with seven subthemes. These have important implications for all service and healthcare providers.

A commercial application of fire retardants to dry-formed hardboards

Treesearch

Gary C. Meyers; Carlton A. Holmes

1977-01-01

Based on laboratory performance with a number of fire-retardant chemicals, disodium octaborate tetrahydrate-boric acid and dicyandiamide-phosphoric acid-formaldehyde were selected for treating fiber and making 4 foot by 8-foot dry-formed hardboards on a commercial production line. The boards were evaluated for performance under exposure to fire, strength, dimensional...

75 FR 56513 - Orders Regarding the Treatment of Petitions Seeking Grandfather Relief for Exempt Commercial...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

... for relief, identified with ``ECM/EBOT Grandfather Relief'' in the subject line, whichever is... exempt market categories--exempt commercial markets (``ECMs'') and exempt boards of trade (``EBOTs... strike CEA Section 2(h)(3)-(7) and, thus, eliminate the ECM category.\\6\\ Similarly, Section 734 of the...

75 FR 22581 - Energy Conservation Program for Commercial Equipment: Decision and Order Granting a Waiver to...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-29

.... (Mitsubishi) for a similar line of commercial multi-split air-conditioning systems: Testing laboratories...-conditioning systems: (1) Testing laboratories cannot test products with so many indoor units; (2) there are too many possible combinations of indoor and outdoor unit to test. The Daikin VRV-WIII systems have...

Study of HV Dielectrics for High Frequency Operation in Linear & Nonlinear Transmission Lines & Simulation & Development of Hybrid Nonlinear Lines for RF Generation

DTIC Science & Technology

2015-08-27

applied reverse voltage [8], [9]. In this report, the experimental results of a varactor diode NLTL built with 30 sections are presented. Besides, Spice ...capacitive line (NLCL) using commercial BT and PZT ceramic capacitors. Corresponding NLCL Spice simulation is provided for comparison with experimental...the output pulse. In special for PZT, Spice simulation of a line with respective linear capacitors illustrates its weak nonlinearity as the

Study of HV Dielectrics for High Frequency Operation in Linear and Nonlinear Transmission Lines (NLTLs) and Simulation and Development of Hybrid Nonlinear Lines for RF Generation

DTIC Science & Technology

2016-01-27

presented. Besides, Spice simulation provides an excellent way of studying the NLTL principle operation by comparing them with the experimental...high voltage nonlinear capacitive line (NLCL) using commercial BT and PZT ceramic capacitors. Corresponding NLCL Spice simulation is provided for...which causes a long tail on the output pulse. In special for PZT, Spice simulation of a line with respective linear capacitors illustrates its weak

SPECTROSCOPIC ONLINE MONITORING FOR PROCESS CONTROL AND SAFEGUARDING OF RADIOCHEMICAL STREAMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bryan, Samuel A.; Levitskaia, Tatiana G.

2013-09-29

There is a renewed interest worldwide to promote the use of nuclear power and close the nuclear fuel cycle. The long term successful use of nuclear power is critically dependent upon adequate and safe processing and disposition of the used nuclear fuel. Liquid-liquid extraction is a separation technique commonly employed for the processing of the dissolved used nuclear fuel. The instrumentation used to monitor these processes must be robust, require little or no maintenance, and be able to withstand harsh environments such as high radiation fields and aggressive chemical matrices. This paper summarizes application of the absorption and vibrational spectroscopicmore » techniques supplemented by physicochemical measurements for radiochemical process monitoring. In this context, our team experimentally assessed the potential of Raman and spectrophotometric techniques for online real-time monitoring of the U(VI)/nitrate ion/nitric acid and Pu(IV)/Np(V)/Nd(III), respectively, in solutions relevant to spent fuel reprocessing. These techniques demonstrate robust performance in the repetitive batch measurements of each analyte in a wide concentration range using simulant and commercial dissolved spent fuel solutions. Spectroscopic measurements served as training sets for the multivariate data analysis to obtain partial least squares predictive models, which were validated using on-line centrifugal contactor extraction tests. Satisfactory prediction of the analytes concentrations in these preliminary experiments warrants further development of the spectroscopy-based methods for radiochemical process control and safeguarding. Additionally, the ability to identify material intentionally diverted from a liquid-liquid extraction contactor system was successfully tested using on-line process monitoring as a means to detect the amount of material diverted. A chemical diversion and detection from a liquid-liquid extraction scheme was demonstrated using a centrifugal contactor system operating with the simulant PUREX extraction system of Nd(NO3)3/nitric acid aqueous phase and TBP/n-dodecane organic phase. During a continuous extraction experiment, a portion of the feed from a counter-current extraction system was diverted while the spectroscopic on-line process monitoring system was simultaneously measuring the feed, raffinate and organic products streams. The amount observed to be diverted by on-line spectroscopic process monitoring was in excellent agreement with values based from the known mass of sample directly taken (diverted) from system feed solution.« less

Grounding explanations in evolving, diagnostic situations

NASA Technical Reports Server (NTRS)

Johannesen, Leila J.; Cook, Richard I.; Woods, David D.

1994-01-01

Certain fields of practice involve the management and control of complex dynamic systems. These include flight deck operations in commercial aviation, control of space systems, anesthetic management during surgery or chemical or nuclear process control. Fault diagnosis of these dynamic systems generally must occur with the monitored process on-line and in conjunction with maintaining system integrity.This research seeks to understand in more detail what it means for an intelligent system to function cooperatively, or as a 'team player' in complex, dynamic environments. The approach taken was to study human practitioners engaged in the management of a complex, dynamic process: anesthesiologists during neurosurgical operations. The investigation focused on understanding how team members cooperate in management and fault diagnosis and comparing this interaction to the situation with an Artificial Intelligence(AI) system that provides diagnoses and explanations. Of particular concern was to study the ways in which practitioners support one another in keeping aware of relevant information concerning the state of the monitored process and of the problem solving process.

In-situ photoluminescence imaging for passivation-layer etching process control for photovoltaics

NASA Astrophysics Data System (ADS)

Lee, J. Z.; Michaelson, L.; Munoz, K.; Tyson, T.; Gallegos, A.; Sullivan, J. T.; Buonassisi, T.

2014-07-01

Light-induced plating (LIP) of solar-cell metal contacts is a scalable alternative to silver paste. However, LIP requires an additional patterning step to create openings in the silicon nitride (SiNx) antireflection coating (ARC) layer prior to metallization. One approach to pattern the SiNx is masking and wet chemical etching. In-situ real-time photoluminescence imaging (PLI) is demonstrated as a process-monitoring method to determine when SiNx has been fully removed during etching. We demonstrate that the change in PLI signal intensity during etching is caused by a combination of (1) decreasing light absorption from the reduction in SiNx ARC layer thickness and (2) decreasing surface lifetime as the SiNx/Si interface transitions to an etch-solution/Si. Using in-situ PLI to guide the etching process, we demonstrate a full-area plated single-crystalline silicon device. In-situ PLI has the potential to be integrated into a commercial processing line to improve process control and reliability.

Rooster semen cryopreservation: effect of pedigree line and male age on postthaw sperm function.

PubMed

Long, J A; Bongalhardo, D C; Pelaéz, J; Saxena, S; Settar, P; O'Sullivan, N P; Fulton, J E

2010-05-01

The fertility rates of cryopreserved poultry semen are highly variable and not reliable for use in preservation of commercial genetic stocks. Our objective was to evaluate the cryosurvival of semen from 8 pedigreed layer lines at 2 different ages: the onset and end of commercial production. Semen from 160 roosters (20/line) was frozen individually with 11% glycerol at 6 and 12 mo of age. Glycerol was removed from thawed semen by Accudenz gradient centrifugation. The viability of thawed sperm from each male was determined using fluorescent live-dead staining and flow cytometry; sperm velocity parameters were measured using computerized motion analysis. The fertilizing ability of thawed sperm was evaluated in vitro by assessing hydrolysis of the inner perivitelline membrane. The postthaw function of sperm from the elite lines varied widely, despite the fact that fresh semen from all of these lines typically yielded high fertility rates. The percentage of thawed sperm with intact plasma membranes ranged from 27.8 + or - 2.1 to 49.6 + or - 1.9 and varied among lines and between age groups. Thawed sperm from 2 lines consistently demonstrated the highest and lowest motility parameters, whereas the velocity parameters of the remaining 6 lines varied widely. The mean number of hydrolysis points per square millimeter of inner perivitelline membrane ranged from 12.5 + or - 4.1 (line 2) to 103.3 + or - 30.2 (line 6). Age effects were observed for 4 out of 8 lines; however, improved postthaw sperm function at 12 mo of age was not consistent for all 3 assays. These results demonstrate variability among pedigreed lines in withstanding glycerol-based semen cryopreservation and provide a model for delineating genotypic and phenotypic factors affecting sperm cryosurvival.

Histopathologic and Myogenic Gene Expression Changes Associated with Wooden Breast in Broiler Breast Muscles.

PubMed

Velleman, Sandra G; Clark, Daniel L

2015-09-01

The wooden breast condition is a myopathy affecting the pectoralis major (p. major) muscle in fast-growing commercial broiler lines. Currently, wooden breast-affected birds are phenotypically detected by palpation of the breast area, with affected birds having a very hard p. major muscle that is of lower value. The objective of this study was to compare the wooden breast myopathy in two fast-growing broiler lines (Lines A and B) with incidence of wooden breast to a slower growing broiler Line C with no phenotypically observable wooden breast. One of the characteristics of the wooden breast condition is fibrosis of the p. major muscle. Morphologic assessment of Lines A and B showed significant fibrosis in both lines, but the collagen distribution and arrangement of the collagen fibrils was different. In Line A, the collagen fibrils were tightly packed, whereas in Line B the collagen fibrils were diffuse. This difference in collagen organization may be due to the expression of the extracellular matrix proteoglycan decorin. Decorin is a regulator of collagen crosslinking and is expressed at significantly higher levels in Line A wooden breast-affected p. major muscle, which would lead to tightly packed collagen fibers due to high levels of collagen crosslinking. Furthermore, expression of the muscle-specific transcriptional regulatory factors for proliferation and differentiation of muscle cells leading to the regeneration of muscle in response to muscle damage was significantly elevated in Line A, and only the factor for differentiation, myogenin, was increased in Line B. The results from this study provide initial evidence that the etiology of the wooden breast myopathy may vary between fast-growing commercial broiler lines.

Printed silver nanowire antennas with low signal loss at high-frequency radio

NASA Astrophysics Data System (ADS)

Komoda, Natsuki; Nogi, Masaya; Suganuma, Katsuaki; Kohno, Kazuo; Akiyama, Yutaka; Otsuka, Kanji

2012-05-01

Silver nanowires are printable and conductive, and are believed to be promising materials in the field of printed electronics. However, the resistivity of silver nanowire printed lines is higher than that of metallic particles or flakes even when sintered at high temperatures of 100-400 °C. Therefore, their applications have been limited to the replacement of transparent electrodes made from high-resistivity materials, such as doped metallic oxides, conductive polymers, carbon nanotubes, or graphenes. Here we report that using printed silver nanowire lines, signal losses obtained in the high-frequency radio were lower than those obtained using etched copper foil antennas, because their surfaces were much smoother than those of etched copper foil antennas. This was the case even though the resistivity of silver nanowire lines was 43-71 μΩ cm, which is much higher than that of etched copper foil (2 μΩ cm). When printed silver nanowire antennas were heated at 100 °C, they achieved signal losses that were much lower than those of silver paste antennas comprising microparticles, nanoparticles, and flakes. Furthermore, using a low temperature process, we succeeded in remotely controlling a commercialized radio-controlled car by transmitting a 2.45 GHz signal via a silver nanowire antenna printed on a polyethylene terephthalate film.Silver nanowires are printable and conductive, and are believed to be promising materials in the field of printed electronics. However, the resistivity of silver nanowire printed lines is higher than that of metallic particles or flakes even when sintered at high temperatures of 100-400 °C. Therefore, their applications have been limited to the replacement of transparent electrodes made from high-resistivity materials, such as doped metallic oxides, conductive polymers, carbon nanotubes, or graphenes. Here we report that using printed silver nanowire lines, signal losses obtained in the high-frequency radio were lower than those obtained using etched copper foil antennas, because their surfaces were much smoother than those of etched copper foil antennas. This was the case even though the resistivity of silver nanowire lines was 43-71 μΩ cm, which is much higher than that of etched copper foil (2 μΩ cm). When printed silver nanowire antennas were heated at 100 °C, they achieved signal losses that were much lower than those of silver paste antennas comprising microparticles, nanoparticles, and flakes. Furthermore, using a low temperature process, we succeeded in remotely controlling a commercialized radio-controlled car by transmitting a 2.45 GHz signal via a silver nanowire antenna printed on a polyethylene terephthalate film. Electronic supplementary information (ESI) available: Operation of R/C car with a silver nanowire monopole antenna. See DOI: 10.1039/c2nr30485f

Generation of transgenic watermelon resistant to Zucchini yellow mosaic virus and Papaya ringspot virus type W.

PubMed

Yu, Tsong-Ann; Chiang, Chu-Hui; Wu, Hui-Wen; Li, Chin-Mei; Yang, Ching-Fu; Chen, Jun-Han; Chen, Yu-Wen; Yeh, Shyi-Dong

2011-03-01

Zucchini yellow mosaic virus (ZYMV) and Papaya ringspot virus type W (PRSV W) are major limiting factors for production of watermelon worldwide. For the effective control of these two viruses by transgenic resistance, an untranslatable chimeric construct containing truncated ZYMV coat protein (CP) and PRSV W CP genes was transferred to commercial watermelon cultivars by Agrobacterium-mediated transformation. Using our protocol, a total of 27 putative transgenic lines were obtained from three cultivars of 'Feeling' (23 lines), 'China baby' (3 lines), and 'Quality' (1 line). PCR and Southern blot analyses confirmed that the chimeric construct was incorporated into the genomic DNA of the transformants. Greenhouse evaluation of the selected ten transgenic lines of 'Feeling' cultivar revealed that two immune lines conferred complete resistance to ZYMV and PRSV W, from which virus accumulation were not detected by Western blotting 4 weeks after inoculation. The transgenic transcript was not detected, but small interfering RNA (siRNA) was readily detected from the two immune lines and T(1) progeny of line ZW 10 before inoculation, indicating that RNA-mediated post-transcriptional gene silencing (PTGS) is the underlying mechanism for the double-virus resistance. The segregation ratio of T(1) progeny of the immune line ZW10 indicated that the single inserted transgene is nuclearly inherited and associated with the phenotype of double-virus resistance as a dominant trait. The transgenic lines derived from the commercial watermelon cultivars have great potential for control of the two important viruses and can be implemented directly without further breeding.

Non-invasive Prediction of Pork Loin Tenderness

USDA-ARS?s Scientific Manuscript database

The present experiment was conducted to develop a non-invasive method to predict tenderness of pork loins. Boneless pork loins (n = 901) were evaluated either on line on the loin boning and trimming line of large-scale commercial plants (n = 465) or at the U.S. Meat Animal Research Center abattoir ...

50 CFR 300.61 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... any halibut that is harvested with setline or other hook and line gear while commercial fishing in any..., territory, or country. Setline gear means one or more stationary, buoyed, and anchored lines with hooks....67, means the charter halibut permit that is currently in effect. [61 FR 35550, July 5, 1996, as...

50 CFR 300.61 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... any halibut that is harvested with setline or other hook and line gear while commercial fishing in any..., territory, or country. Setline gear means one or more stationary, buoyed, and anchored lines with hooks....67, means the charter halibut permit that is currently in effect. [61 FR 35550, July 5, 1996, as...

50 CFR 300.61 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... any halibut that is harvested with setline or other hook and line gear while commercial fishing in any..., territory, or country. Setline gear means one or more stationary, buoyed, and anchored lines with hooks....67, means the charter halibut permit that is currently in effect. [61 FR 35550, July 5, 1996, as...

Progress in development of male sterile germplasm for hybrid rice breeding

USDA-ARS?s Scientific Manuscript database

Currently, there are two types of male sterility mainly commercialized in hybrid rice production, three-line type or cytoplasmic male sterility (CMS) and two-line type or environmental male sterility (EMS). The great majority belongs to the CMS and there are four strategies that have been proven suc...

Scale-up of 2G wire manufacturing at American Superconductor Corporation

NASA Astrophysics Data System (ADS)

Fleshler, S.; Buczek, D.; Carter, B.; Cedrone, P.; DeMoranville, K.; Gannon, J.; Inch, J.; Li, X.; Lynch, J.; Otto, A.; Podtburg, E.; Roy, D.; Rupich, M.; Sathyamurthy, S.; Schreiber, J.; Thieme, C.; Thompson, E.; Tucker, D.; Nagashima, K.; Ogata, M.

2009-10-01

American Superconductor Corporation (AMSC) has developed the base technology and a manufacturing line for initial volume production of low-cost second generation high temperature superconductor (2G HTS) wire for commercial and military applications. The manufacturing line is based on reel-to-reel processing of wide HTS strips using rolling assisted bi-axially textured substrate (RABiTS™) for the template and Metal Organic Deposition (MOD) for the HTS layer. AMSC’s wide strip process is a low cost manufacturing technology since multiple wires are produced in a single manufacturing pass by slitting the wide strip to narrower width in the last stage of the manufacturing process. Industry standard 4.4 mm wide wires are produced by laminating metallic foils, such as copper, stainless steel or any other material, to the HTS insert wire, and are chosen to tailor the electrical, thermal and mechanical properties of the wire for specific applications. The laminated, 4.4 mm wide wires are known as “344 superconductors.” In this paper, we summarize the status of AMSC’s manufacturing capability, the performance of the wire presently being produced, as well as the cost and technical advantages of AMSC’s manufacturing approach. In addition, future direction for research and development to improve electrical performance is presented.

Current trends in molecular sensing

NASA Astrophysics Data System (ADS)

Wlodarski, Wojtek

1992-08-01

The biosphere contains a myriad of substances which can influence or stimulate various aspects of the health and behavior of living organisms. Not surprisingly, in the last decade or so researchers have appreciated the potential of developing a range of molecular sensor technologies, designed to estimate and monitor biological and chemical substances with a view to eventually controlling the biological processes themselves. This development has been accelerated recently by the realization that molecular sensors offer considerable commercial potential. At the same time, it was quickly appreciated that such sensors could revolutionize several areas, including health care, pollution and contamination monitoring, agriculture, on-line monitoring and control of industrial chemical processing, and strategic and tactical monitoring of chemical warfare. This brief review considers the changing scene in molecular sensor research by reference to a few key examples.

KSC-00pp1584

NASA Image and Video Library

2000-10-18

During Super Safety and Health Day at KSC, workers from Florida Power and Light (at left) demonstrate to an interested group of KSC employees how they safely handle high power lines. Safety Day is a full day of NASA-sponsored, KSC and 45th Space Wing events involving a number of health and safety related activities: Displays, vendors, technical paper sessions, panel discussions, a keynote speaker, etc. The entire Center and Wing stand down to participate in the planned events. Safety Day is held annually to proactively increase awareness in safety and health among the government and contractor workforce population. The first guiding principle at KSC is “Safety and Health First.” KSC’s number one goal is to “Assure sound, safe and efficient practices and processes are in place for privatized/commercialized launch site processing.

KSC00pp1584

NASA Image and Video Library

2000-10-18

During Super Safety and Health Day at KSC, workers from Florida Power and Light (at left) demonstrate to an interested group of KSC employees how they safely handle high power lines. Safety Day is a full day of NASA-sponsored, KSC and 45th Space Wing events involving a number of health and safety related activities: Displays, vendors, technical paper sessions, panel discussions, a keynote speaker, etc. The entire Center and Wing stand down to participate in the planned events. Safety Day is held annually to proactively increase awareness in safety and health among the government and contractor workforce population. The first guiding principle at KSC is “Safety and Health First.” KSC’s number one goal is to “Assure sound, safe and efficient practices and processes are in place for privatized/commercialized launch site processing.

Reaction to frustration in high and low feather pecking lines of laying hens from commercial or semi-natural rearing conditions.

PubMed

Rodenburg, T B; Koene, P; Spruijt, B M

2004-02-27

The effect of rearing conditions on feather pecking and reaction to frustration was studied in two lines of laying hens. From commercial rearing conditions (large group, no mother hen), seven birds from a high feather pecking line (HC birds) and eight birds from a low feather pecking line (LC birds) were used. From semi-natural rearing conditions (small group, mother hen present) seven birds from the high feather pecking line (HN birds) were used. Feather pecking behaviour of HC, LC, and HN groups was recorded for 30 min. After that, each bird was food deprived and trained to peck a key for a food reward in a Skinnerbox. After training, each bird was subjected to a frustration session in a Skinnerbox, where the feeder was covered with Perspex. Three HC birds showed severe feather pecking, compared with one HN bird and zero LC birds. Differences in reaction to frustration were found between birds from different lines, but not in birds from different rearing conditions. LC birds tended to put their head in the feeder more frequently than HC birds over all sessions. Although limited, this study indicates that rearing conditions influence feather pecking, but not reaction to frustration.

Reduction in hSOD1 copy number significantly impacts ALS phenotype presentation in G37R (line 29) mice: implications for the assessment of putative therapeutic agents.

PubMed

Zwiegers, Pierre; Lee, Grace; Shaw, Christopher A

2014-08-08

In vivo animal models of familial amyotrophic lateral sclerosis (fALS) are widely used to delineate the potential role that genetic mutations play in the neurodegenerative process. While these models are extensively used for establishing the safety and efficacy of putative therapeutics during pre-clinical development, effective clinical translation of pharmacological interventions has been largely unsuccessful. In this report we compare a recent cohort of G37R (line 29) mice generated from mating wild-type females with transgenic males obtained commercially to a previous set of offspring produced with transgenic male breeders from a colony established at a local collaborator's facility. Commercially derived progeny presented with a tightly clustered genomic signature for the mutant human superoxide dismutase1 transgene (hSOD1) locus, and exhibited a greater than two-fold reduction in the number of transgene copies present in the genome compared to offspring derived locally. Decrease in transgene levels corresponded with delayed ALS progression and a significant increase in overall lifespan (146%). These results highlight some key challenges inherent to the use of G37R (line 29) animals in pre-clinical studies for the development of ALS therapeutics. Without stringent assessment of mutant SOD1 copy number/protein levels, heterogeneity of transgene levels within cohorts may influence the behavioural and pathological presentation of disease and thus calls to question the validity of any detected therapeutic effects. Nuanced changes in mutant SOD1 copy number that currently remain unreported may undermine research endeavours, delay efforts for clinical translation, and compromise the rigor of animal studies by limiting reproducibility amongst research groups.

System Architecture For High Speed Sorting Of Potatoes

NASA Astrophysics Data System (ADS)

Marchant, J. A.; Onyango, C. M.; Street, M. J.

1989-03-01

This paper illustrates an industrial application of vision processing in which potatoes are sorted according to their size and shape at speeds of up to 40 objects per second. The result is a multi-processing approach built around the VME bus. A hardware unit has been designed and constructed to encode the boundary of the potatoes, to reducing the amount of data to be processed. A master 68000 processor is used to control this unit and to handle data transfers along the bus. Boundary data is passed to one of three 68010 slave processors each responsible for a line of potatoes across a conveyor belt. The slave processors calculate attributes such as shape, size and estimated weight of each potato and the master processor uses this data to operate the sorting mechanism. The system has been interfaced with a commercial grading machine and performance trials are now in progress.

Pharmacological importance of sulphated polysaccharide carrageenan from red seaweed Kappaphycus alvarezii in comparison with commercial carrageenan.

PubMed

Suganya, Arumugampillai Manimehalai; Sanjivkumar, Muthusamy; Chandran, Manohar Navin; Palavesam, Arunachalam; Immanuel, Grasian

2016-12-01

Pharmacological properties of native carrageenan (κ) extracted from Kappaphycus alvarezii and commercial carrageenan (Sigma-Aldrich) were evaluated using in vitro antioxidant, anticancer and antidiabetic studies. Phytochemical analysis of native and commercial carrageenans showed the presence of alkaloids, saponins, steroids, gums & mucilages and carbohydrate. Both native and commercial carrageenans exhibited better antioxidant activities such as total antioxidant capacity (87±0.47 and 82.6±0.47μg A.A/g), hydroxyl radical scavenging activity (61.4±0.27 and 58.66±0.31μg/ml), nitric oxide radical scavenging activity (80.42±0.22 and 73.66±0.22μg/ml), DPPH radical scavenging activity (56.26±0.20 and 53.67±0.082μg/ml) and reducing power assay (46.57±0.32 and 42.54±0.27μg/ml) at the maximum concentration of 100μg/ml carrageenans. These results indicated that native carrageenan from K. alvarezii possessed better antioxidant potential in comparison with commercial carrageenan. Anticancer activities of both carrageenans showed excellent inhibition on the growth of breast, colon, liver and osteosarcoma cell lines at the maximum concentration of 150μg/ml. Native carrageenan exhibited an excellent anticancer activity on colon carcinoma cell lines (67.66±0.168%) with the IC 50 value of 73.87μg/ml and commercial carrageenan possessed a potent inhibition on the growth of breast cancer cell lines (67.33±0.077%) with the IC 50 value of 123.8μg/ml. These results clearly indicated the beneficial effect of native and commercial carrageenans as anticancer agents being a free radical scavenger. Anti-diabetic property of both carrageenans showed inhibition effect on α- glucosidase enzyme. The inhibitory effect depends on concentration of carrageenans and it was recorded that maximum (74.49±1.05 and 67.42±0.63) inhibitory effect of α- glucosidase enzyme at 500μg/ml concentration. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Introgression of wild alleles into the tetraploid peanut crop to improve water use efficiency, earliness and yield.

PubMed

Dutra, Wellison F; Guerra, Yrlânia L; Ramos, Jean P C; Fernandes, Pedro D; Silva, Carliane R C; Bertioli, David J; Leal-Bertioli, Soraya C M; Santos, Roseane C

2018-01-01

The introduction of genes from wild species is a practice little adopted by breeders for the improvement of commercial crops, although it represents an excellent opportunity to enrich the genetic basis and create new cultivars. In peanut, this practice is being increasingly adopted. In this study we present results of introgression of wild alleles from the wild species Arachis duranensis and A. batizocoi improving photosynthetic traits and yield in a set of lines derived from the cross of an induced allotetraploid and cultivated peanut with selection under water stress. The assays were carried out in greenhouse and field focusing on physiological and agronomic traits. A multivariate model (UPGMA) was adopted in order to classify drought tolerant lines. Several lines showed improved levels of tolerance, with values similar to or greater than the tolerant control. Two BC1F6 lines (53 P4 and 96 P9) were highlighted for good drought-related traits, earliness and pod yield, having better phenotypic profile to the drought tolerant elite commercial cultivar BR1. These lines are good candidates for the creation of peanut cultivars suitable for production in semiarid environments.

Low Resting Membrane Potential and Low Inward Rectifier Potassium Currents Are Not Inherent Features of hiPSC-Derived Cardiomyocytes.

PubMed

Horváth, András; Lemoine, Marc D; Löser, Alexandra; Mannhardt, Ingra; Flenner, Frederik; Uzun, Ahmet Umur; Neuber, Christiane; Breckwoldt, Kaja; Hansen, Arne; Girdauskas, Evaldas; Reichenspurner, Hermann; Willems, Stephan; Jost, Norbert; Wettwer, Erich; Eschenhagen, Thomas; Christ, Torsten

2018-03-13

Human induced pluripotent stem cell (hiPSC) cardiomyocytes (CMs) show less negative resting membrane potential (RMP), which is attributed to small inward rectifier currents (I K1 ). Here, I K1 was measured in hiPSC-CMs (proprietary and commercial cell line) cultured as monolayer (ML) or 3D engineered heart tissue (EHT) and, for direct comparison, in CMs from human right atrial (RA) and left ventricular (LV) tissue. RMP was measured in isolated cells and intact tissues. I K1 density in ML- and EHT-CMs from the proprietary line was similar to LV and RA, respectively. I K1 density in EHT-CMs from the commercial line was 2-fold smaller than in the proprietary line. RMP in EHT of both lines was similar to RA and LV. Repolarization fraction and I K,ACh response discriminated best between RA and LV and indicated predominantly ventricular phenotype in hiPSC-CMs/EHT. The data indicate that I K1 is not necessarily low in hiPSC-CMs, and technical issues may underlie low RMP in hiPSC-CMs. Copyright © 2018 The Author(s). Published by Elsevier Inc. All rights reserved.

Colonization of internal organs by Salmonella Enteritidis in experimentally infected laying hens of four commercial genetic lines in conventional cage and enriched colony housing

USDA-ARS?s Scientific Manuscript database

Human infections with Salmonella Enteritidis are often attributed to the consumption of contaminated eggs, so the prevalence of this pathogen in commercial egg-laying flocks is a significant public health concern. Internal contamination of the edible contents of eggs results from bacterial colonizat...

Commercial production of microbials by Reuter Laboratories, inc., for control of the gypsy moth and the spruce budworm

Treesearch

F. D. Obenchain

1985-01-01

Reuter Laboratories announces additions to its line of microbial insecticides with the 1984-85 introduction of a Bacillus thuringiensis, Berliner, variety Kurstaki (HD-1, H-3A3B) wettable powder formulation. Gypsy moth nucleopolyhedrosis virus, in experimental production since 1982, is scheduled for commercial introduction as a...

Evaluation of soybean commercial varieties for resistance to Phomopsis seed decay in the Mississippi Delta, 2012

USDA-ARS?s Scientific Manuscript database

Soybean Phomopsis seed decay (PSD), primarily caused by Phomopsis longicolla, is a major cause of poor seed quality in the United States, especially in the mid-southern region. To identify new sources of soybean lines resistant to PSD, 16 commercial soybean varieties (MG IV and MGV) were planted on ...

50 CFR 622.385 - Commercial trip limits.

Code of Federal Regulations, 2013 CFR

2013-10-01

... commercial vessel permit for king mackerel and a king mackerel gillnet permit have been issued. (B) Hook-and...), and operating under the hook-and-line gear quotas in § 622.384(b)(1)(i)(B)(1) or (b)(1)(i)(B)(2): (1) From July 1, each fishing year, until 75 percent of the respective northern or southern subzone's hook...

50 CFR 622.385 - Commercial trip limits.

Code of Federal Regulations, 2014 CFR

2014-10-01

... commercial vessel permit for king mackerel and a king mackerel gillnet permit have been issued. (B) Hook-and...), and operating under the hook-and-line gear quotas in § 622.384(b)(1)(i)(B)(1) or (b)(1)(i)(B)(2): (1) From July 1, each fishing year, until 75 percent of the respective northern or southern subzone's hook...

50 CFR 622.44 - Commercial trip limits.

Code of Federal Regulations, 2010 CFR

2010-10-01

....43(a)—in amounts not exceeding 3,000 lb (1,361 kg) per day. (b) Spanish mackerel. (1) Commercial trip limits are established for Atlantic migratory group Spanish mackerel as follows: (i) North of 30°42′45.6″ N. lat., which is a line directly east from the Georgia/Florida boundary, Spanish mackerel in or...

Prevalent organisms on ostrich carcasses found in a commercial abattoir.

PubMed

Hoffman, L C; Britz, T J; Schnetler, D C

2010-09-01

The prevalent microbial growth on carcasses before and after overnight cooling in an ostrich abattoir and de-boning plant was investigated. The effect of warm or cold trimming of the carcasses was examined together with possible causes of contamination along the processing line. An attempt was made to link the prevalent microorganisms that were identified from carcasses to those from specific external contamination sources. Samples of carcasses and possible contaminants were collected in the plant, plated out and selected organisms were typed using a commercial rapid identification system. It was indicated that the cold trim (mainly of bruises) of carcasses was advantageous in terms of microbiological meat quality. Results indicated pooled water in the abattoir as the most hazardous vector for carcass contamination and that contaminants from this source are mostly Gram-negative pathogens. Pseudomonas and Shigella were frequently isolated from surface and air samples and indicated that the control of total plant hygiene is a requirement for producing ostrich meat that is safe to consume and has an acceptable shelf-life.

Overview of a FPGA-based nuclear instrumentation dedicated to primary activity measurements.

PubMed

Bobin, C; Bouchard, J; Pierre, S; Thiam, C

2012-09-01

In National Metrology Institutes like LNE-LNHB, renewal and improvement of the instrumentation is an important task. Nowadays, the current trend is to adopt digital boards, which present numerous advantages over the standard electronics. The feasibility of an on-line fulfillment of nuclear-instrumentation functionalities using a commercial FPGA-based (Field-Programmable Gate Array) board has been validated in the case of TDCR primary measurements (Triple to Double Coincidence Ratio method based on liquid scintillation). The new applications presented in this paper have been included to allow either an on-line processing of the information or a raw-data acquisition for an off-line treatment. Developed as a complementary tool for TDCR counting, a time-to-digital converter specifically designed for this technique has been added. In addition, the description is given of a spectrometry channel based on the connection between conventional shaping amplifiers and the analog-to-digital converter (ADC) input available on the same digital board. First results are presented in the case of α- and γ-counting related to, respectively, the defined solid angle and well-type NaI(Tl) primary activity techniques. The combination of two different channels (liquid scintillation and γ-spectrometry) implementing the live-time anticoincidence processing is also described for the application of the 4πβ-γ coincidence method. The need for an optimized coupling between the analog chain and the ADC stage is emphasized. The straight processing of the signals delivered by the preamplifier connected to a HPGe detector is also presented along with the first development of digital filtering. Copyright © 2012 Elsevier Ltd. All rights reserved.

Hollow-cathode lamps as optical frequency standards: the influence of optical imaging on the line-strength ratios

NASA Astrophysics Data System (ADS)

Huke, Philipp; Tal-Or, Lev; Sarmiento, Luis Fernando; Reiners, Ansgar

2016-07-01

Hollow cathode discharge lamps (HCLs) have been successfully used in recent years as calibration sources of optical astronomical spectrographs. The numerous narrow metal lines have stable wavelengths, which makes them well suited for m/s calibration accuracy of high-resolution spectrographs, while the buffer-gas lines are less stable and less useful. Accordingly, an important property is the metal-to-gas line-strength ratio (Rmetal/gas). Processes inside the lamp cause the light to be emitted from different regions between the cathode and the anode leaing to the emission of different beams with different values of Rmetal/gas. We used commercially- available HCLs to measure and characterize these beams with respect to their spatial distribution, their angle of propagation relative to the optical axis, and their values of Rmetal/gas. We conclude that a good imaging of an HCL into a fiber-fed spectrograph would consist of an aperture close to its front window in order to filter out the parts of the beam with low Rmetal/gas, and of a lens to collimate the important central beam. We show that Rmetal/gas can be further improved with only minor adjustments of the imaging parameters, and that the imaging scheme that yields the highest Rmetal/gas does not necessarily provide the highest flux.

Qualitative evaluation of maternal milk and commercial infant formulas via LIBS.

PubMed

Abdel-Salam, Z; Al Sharnoubi, J; Harith, M A

2013-10-15

This study focuses on the use of laser-induced breakdown spectroscopy (LIBS) for the evaluation of the nutrients in maternal milk and some commercially available infant formulas. The results of such evaluation are vital for adequate and healthy feeding for babies during lactation period. Laser-induced breakdown spectroscopy offers special advantages in comparison to the other conventional analytical techniques. Specifically, LIBS is a straightforward technique that can be used in situ to provide qualitative analytical information in few minutes for the samples under investigation without preparation processes. The samples studied in the current work were maternal milk samples collected during the first 3 months of lactation (not colostrum milk) and samples from six different types of commercially available infant formulas. The samples' elemental composition has been compared with respect to the relative abundance of the elements of nutrition importance, namely Mg, Ca, Na, and Fe using their spectral emission lines in the relevant LIBS spectra. In addition, CN and C2 molecular emission bands in the same spectra have been studied as indicators of proteins content in the samples. The obtained analytical results demonstrate the higher elemental contents of the maternal milk compared with the commercial formulas samples. Similar results have been obtained as for the proteins content. It has been also shown that calcium and proteins have similar relative concentration trends in the studied samples. This work demonstrates the feasibility of adopting LIBS as a fast, safe, less costly technique evaluating qualitatively the nutrients content of both maternal and commercial milk samples. Copyright © 2013 Elsevier B.V. All rights reserved.

Advanced Research Deposition System (ARDS) for processing CdTe solar cells

NASA Astrophysics Data System (ADS)

Barricklow, Keegan Corey

CdTe solar cells have been commercialized at the Gigawatt/year level. The development of volume manufacturing processes for next generation CdTe photovoltaics (PV) with higher efficiencies requires research systems with flexibility, scalability, repeatability and automation. The Advanced Research Deposition Systems (ARDS) developed by the Materials Engineering Laboratory (MEL) provides such a platform for the investigation of materials and manufacturing processes necessary to produce the next generation of CdTe PV. Limited by previous research systems, the ARDS was developed to provide process and hardware flexibility, accommodating advanced processing techniques, and capable of producing device quality films. The ARDS is a unique, in-line process tool with nine processing stations. The system was designed, built and assembled at the Materials Engineering Laboratory. Final assembly, startup, characterization and process development are the focus of this research. Many technical challenges encountered during the startup of the ARDS were addressed in this research. In this study, several hardware modifications needed for the reliable operation of the ARDS were designed, constructed and successfully incorporated into the ARDS. The effect of process condition on film properties for each process step was quantified. Process development to achieve 12% efficient baseline solar cell required investigation of discrete processing steps, troubleshooting process variation, and developing performance correlations. Subsequent to this research, many advances have been demonstrated with the ARDS. The ARDS consistently produces devices of 12% +/-.5% by the process of record (POR). The champion cell produced to date utilizing the ARDS has an efficiency of 16.2% on low cost commercial sodalime glass and utilizes advanced films. The ARDS has enabled investigation of advanced concepts for processing CdTe devices including, Plasma Cleaning, Plasma Enhanced Closed Space Sublimation (PECSS), Electron Reflector (ER) using Cd1-xMgxTe (CMT) structure and alternative device structures. The ARDS has been instrumental in the collaborative research with many institutions.

Perfusion cell culture decreases process and product heterogeneity in a head-to-head comparison with fed-batch.

PubMed

Walther, Jason; Lu, Jiuyi; Hollenbach, Myles; Yu, Marcella; Hwang, Chris; McLarty, Jean; Brower, Kevin

2018-05-30

In this study, we compared the impacts of fed-batch and perfusion platforms on process and product attributes for IgG1- and IgG4-producing cell lines. A "plug-and-play" approach was applied to both platforms at bench scale, using commercially available basal and feed media, a standard feed strategy for fed-batch, and ATF filtration for perfusion. Product concentration in fed-batch was 2.5 times greater than perfusion, while average productivity in perfusion was 7.5 times greater than fed-batch. PCA revealed more variability in the cell environment and metabolism during the fed-batch run. LDH measurements showed that exposure of product to cell lysate was 7-10 times greater in fed-batch. Product analysis shows larger abundances of neutral species in perfusion, likely due to decreased bioreactor residence times and extracellular exposure. The IgG1 perfusion product also had higher purity and lower half-antibody. Glycosylation was similar across both culture modes. The first perfusion harvest slice for both product types showed different glycosylation than subsequent harvests, suggesting that product quality lags behind metabolism. In conclusion, process and product data indicate that intra-lot heterogeneity is decreased in perfusion cultures. Additional data and discussion is required to understand the developmental, clinical and commercial implications, and in what situations increased uniformity would be beneficial. This article is protected by copyright. All rights reserved.

Laser penetration spike welding: a welding tool enabling novel process and design opportunities

NASA Astrophysics Data System (ADS)

Dijken, Durandus K.; Hoving, Willem; De Hosson, J. Th. M.

2002-06-01

A novel method for laser welding for sheet metal. is presented. This laser spike welding method is capable of bridging large gaps between sheet metal plates. Novel constructions can be designed and manufactured. Examples are light weight metal epoxy multi-layers and constructions having additional strength with respect to rigidity and impact resistance. Its capability to bridge large gaps allows higher dimensional tolerances in production. The required laser systems are commercially available and are easily implemented in existing production lines. The lasers are highly reliable, the resulting spike welds are quickly realized and the cost price per weld is very low.

PCF-based Fabry-Perot interferometric sensor for strain measurement under high-temperature

NASA Astrophysics Data System (ADS)

Deng, Ming; Tang, Chang-Ping; Zhu, Tao; Rao, Yun-Jiang

2011-05-01

We report a simple and robust all-fiber in-line Fabry-Perot interferometer (FPI) with bubble cavity, which is fabricated by directly splicing a mutimode photonic crystal fiber to a conventional single mode fiber by using a commercial splicer. The fabrication process only involves fusion splicing and cleaving. The high-temperature strain characteristic of such a device is evaluated and experimental results shows that this FPI can be used as an ideal sensor for precise strain measurement under high temperatures of up to 750°C. Therefore, such a FPI sensor may find important applications in aeronautics or metallurgy areas.

Development of Novel Glyphosate-Tolerant Japonica Rice Lines: A Step Toward Commercial Release.

PubMed

Cui, Ying; Huang, Shuqing; Liu, Ziduo; Yi, Shuyuan; Zhou, Fei; Chen, Hao; Lin, Yongjun

2016-01-01

Glyphosate is the most widely used herbicide for its low cost and high efficiency. However, it is rarely applied directly in rice field due to its toxicity to rice. Therefore, glyphosate-tolerant rice can greatly decrease the cost of rice production and provide a more effective weed management strategy. Although, several approaches to develop transgenic rice with glyphosate tolerance have been reported, the agronomic performances of these plants have not been well evaluated, and the feasibility of commercial production has not been confirmed yet. Here, a novel glyphosate-tolerant gene cloned from the bacterium Isoptericola variabilis was identified, codon optimized (designated as I. variabilis-EPSPS (*)), and transferred into Zhonghua11, a widely used japonica rice cultivar. After systematic analysis of the transgene integration via PCR, Southern blot and flanking sequence isolation, three transgenic lines with only one intact I. variabilis-EPSPS (*) expression cassette integrated into intergenic regions were identified. Seed test results showed that the glyphosate tolerance of the transgenic rice was about 240 times that of wild type on plant medium. The glyphosate tolerance of transgenic rice lines was further evaluated based on comprehensive agronomic performances in the field with T3 and T5generations in a 2-year assay, which showed that they were rarely affected by glyphosate even when the dosage was 8400 g ha(-1). To our knowledge, this is the first demonstration of the development of glyphosate-tolerant rice lines based on a comprehensive analysis of agronomic performances in the field. Taken together, the results suggest that the selected glyphosate-tolerant rice lines are highly tolerant to glyphosate and have the possibility of commercial release. I. variabilis-EPSPS (*) also can be a promising candidate gene in other species for developing glyphosate-tolerant crops.

A process to help assure successful commercial space ventures

NASA Astrophysics Data System (ADS)

Mihara, Sam K.

1999-01-01

The purpose of this paper is to describe a process for successful space business ventures-a methodology used by highly successful commercial ventures, but relatively new to space business enterprises. What do highly successful commercial business ventures have in common? How do these companies differ from most commercial space ventures? The answer is the implementation of a state-of-the-art customer satisfaction process. Take the case of the latest winners of the Malcolm Baldrige National Quality Award. What did they do that helped to achieve this performance? The answer is they implemented an effective process that measures and achieves the highest possible level of customer satisfaction. The same process can be implemented by space enterprises to achieve comparable commercial results. This paper describes the six-step process, including examples of each step. It concludes with the strong recommendation that this process be implemented to assure success in the commercial space world.

16 CFR 1203.11 - Marking the impact test line.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 1203.11 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT... (HPI), with the brow parallel to the basic plane. Place a 5-kg (11-lb) preload ballast on top of the... helmet coinciding with the intersection of the surface of the helmet with the impact line planes defined...

49 CFR 393.60 - Glazing in specified openings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... windshield wipers, and outside the driver's sight lines to the road and highway signs or signals. [63 FR 1387... the area swept by the windshield wipers, and outside the driver's sight lines to the road and highway signs and signals. (2) Decals and stickers mounted on the windshield. Commercial Vehicle Safety Alliance...

49 CFR 393.60 - Glazing in specified openings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... windshield wipers, and outside the driver's sight lines to the road and highway signs or signals. [63 FR 1387... the area swept by the windshield wipers, and outside the driver's sight lines to the road and highway signs and signals. (2) Decals and stickers mounted on the windshield. Commercial Vehicle Safety Alliance...

49 CFR 393.60 - Glazing in specified openings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... windshield wipers, and outside the driver's sight lines to the road and highway signs or signals. [63 FR 1387... the area swept by the windshield wipers, and outside the driver's sight lines to the road and highway signs and signals. (2) Decals and stickers mounted on the windshield. Commercial Vehicle Safety Alliance...

49 CFR 393.60 - Glazing in specified openings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... windshield wipers, and outside the driver's sight lines to the road and highway signs or signals. [63 FR 1387... the area swept by the windshield wipers, and outside the driver's sight lines to the road and highway signs and signals. (2) Decals and stickers mounted on the windshield. Commercial Vehicle Safety Alliance...

Discovery and characterization of proteins associated with aflatoxin-resistance: evaluating their potential as breeding markers.

PubMed

Brown, Robert L; Chen, Zhi-Yuan; Warburton, Marilyn; Luo, Meng; Menkir, Abebe; Fakhoury, Ahmad; Bhatnagar, Deepak

2010-04-01

Host resistance has become a viable approach to eliminating aflatoxin contamination of maize since the discovery of several maize lines with natural resistance. However, to derive commercial benefit from this resistance and develop lines that can aid growers, markers need to be identified to facilitate the transfer of resistance into commercially useful genetic backgrounds without transfer of unwanted traits. To accomplish this, research efforts have focused on the identification of kernel resistance-associated proteins (RAPs) including the employment of comparative proteomics to investigate closely-related maize lines that vary in aflatoxin accumulation. RAPs have been identified and several further characterized through physiological and biochemical investigations to determine their causal role in resistance and, therefore, their suitability as breeding markers. Three RAPs, a 14 kDa trypsin inhibitor, pathogenesis-related protein 10 and glyoxalase I are being investigated using RNAi gene silencing and plant transformation. Several resistant lines have been subjected to QTL mapping to identify loci associated with the aflatoxin-resistance phenotype. Results of proteome and characterization studies are discussed.

Manufacturing of Low Cost, Durable Membrane Electrode Assemblies Engineered for Rapid Conditioning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Busby, Colin

Over the past 20 years significant progress in membrane-electrode assembly (MEA) technology development for polymer electrolyte fuel cells (PEMFCs) has resulted in the PEMFC technology approaching a commercial reality for transportation applications. However, there remain two primary technical challenges to be addressed in the MEA. First and foremost is meeting the automotive cost targets: Producing a fuel cell stack cost competitive with today’s internal combustion engine. In addition to the material cost, MEA (and other components) and stack assembly production methods must be amenable for use in low cost, high speed, automotive assembly line. One impediment to this latter goalmore » is that stack components must currently go through a long and tedious conditioning procedure before they produce optimal power. This so-called “break-in” can take many hours, and can involve quite complex voltage, temperature and/or pressure steps. These break-in procedures must be simplified and the time required reduced if fuel cells are to become a viable automotive engine. The second challenge is to achieve the durability targets in real-world automotive duty cycle operations. Significant improvements in cost, break-in time, and durability for the key component of fuel cell stacks, MEAs were achieved in this project. Advanced modeling was used to guide design of the new MEA to maximize performance and durability. A new, innovative process and manufacturing approach utilizing direct in-line coating using scalable, cost-competitive, continuous high volume 3-layer rolled-good manufacturing processes was developed and validated by single cell and short stack testing. In addition, the direct coating methods employed were shown to reduce the cost for sacrificial films. Furthermore, Gore has demonstrated a 10 µm reinforced membrane that is used in the new low-cost process and can meet automotive power density and durability targets. Across a wide range of operating conditions, the direct-coated MEA outperformed the commercial baseline MEA, and did so through a process that delivers MEAs at $92.35/m2 at a volume of 500,000 systems per year, according to Strategic Analysis (SA) estimates.« less

Experimental Verification of the Use of Metal Filled Via Hole Fences for Crosstalk Control of Microstrip Lines in LTCC Packages

NASA Technical Reports Server (NTRS)

Ponchak, George E.; Chun, Donghoon; Katehi, Linda P. B.; Yook, Jong-Gwan

1999-01-01

Coupling between microstrip lines in dense RF packages is a common problem that degrades circuit performance. Prior 3D-FEM electromagnetic simulations have shown that metal filled via hole fences between two adjacent microstrip lines actually increases coupling between the lines; however, if the top of the via posts are connected by a metal Strip, coupling is reduced. In this paper, experimental verification of the 3D-FEM simulations Is demonstrated for commercially fabricated LTCC packages.

An efficient, maintenance free and approved method for spectroscopic control and monitoring of blend uniformity: The moving F-test.

PubMed

Besseling, Rut; Damen, Michiel; Tran, Thanh; Nguyen, Thanh; van den Dries, Kaspar; Oostra, Wim; Gerich, Ad

2015-10-10

Dry powder mixing is a wide spread Unit Operation in the Pharmaceutical industry. With the advent of in-line Near Infrared (NIR) Spectroscopy and Quality by Design principles, application of Process Analytical Technology to monitor Blend Uniformity (BU) is taking a more prominent role. Yet routine use of NIR for monitoring, let alone control of blending processes is not common in the industry, despite the improved process understanding and (cost) efficiency that it may offer. Method maintenance, robustness and translation to regulatory requirements have been important barriers to implement the method. This paper presents a qualitative NIR-BU method offering a convenient and compliant approach to apply BU control for routine operation and process understanding, without extensive calibration and method maintenance requirements. The method employs a moving F-test to detect the steady state of measured spectral variances and the endpoint of mixing. The fundamentals and performance characteristics of the method are first presented, followed by a description of the link to regulatory BU criteria, the method sensitivity and practical considerations. Applications in upscaling, tech transfer and commercial production are described, along with evaluation of the method performance by comparison with results from quantitative calibration models. A full application, in which end-point detection via the F-test controls the blending process of a low dose product, was successfully filed in Europe and Australia, implemented in commercial production and routinely used for about five years and more than 100 batches. Copyright © 2015 Elsevier B.V. All rights reserved.

Subfamily-Specific Fluorescent Probes for Cysteine Proteases Display Dynamic Protease Activities during Seed Germination.

PubMed

Lu, Haibin; Chandrasekar, Balakumaran; Oeljeklaus, Julian; Misas-Villamil, Johana C; Wang, Zheming; Shindo, Takayuki; Bogyo, Matthew; Kaiser, Markus; van der Hoorn, Renier A L

2015-08-01

Cysteine proteases are an important class of enzymes implicated in both developmental and defense-related programmed cell death and other biological processes in plants. Because there are dozens of cysteine proteases that are posttranslationally regulated by processing, environmental conditions, and inhibitors, new methodologies are required to study these pivotal enzymes individually. Here, we introduce fluorescence activity-based probes that specifically target three distinct cysteine protease subfamilies: aleurain-like proteases, cathepsin B-like proteases, and vacuolar processing enzymes. We applied protease activity profiling with these new probes on Arabidopsis (Arabidopsis thaliana) protease knockout lines and agroinfiltrated leaves to identify the probe targets and on other plant species to demonstrate their broad applicability. These probes revealed that most commercially available protease inhibitors target unexpected proteases in plants. When applied on germinating seeds, these probes reveal dynamic activities of aleurain-like proteases, cathepsin B-like proteases, and vacuolar processing enzymes, coinciding with the remobilization of seed storage proteins. © 2015 American Society of Plant Biologists. All Rights Reserved.

Power control electronics for cryogenic instrumentation

NASA Technical Reports Server (NTRS)

Ray, Biswajit; Gerber, Scott S.; Patterson, Richard L.; Myers, Ira T.

1995-01-01

In order to achieve a high-efficiency high-density cryogenic instrumentation system, the power processing electronics should be placed in the cold environment along with the sensors and signal-processing electronics. The typical instrumentation system requires low voltage dc usually obtained from processing line frequency ac power. Switch-mode power conversion topologies such as forward, flyback, push-pull, and half-bridge are used for high-efficiency power processing using pulse-width modulation (PWM) or resonant control. This paper presents several PWM and multiresonant power control circuits, implemented using commercially available CMOS and BiCMOS integrated circuits, and their performance at liquid-nitrogen temperature (77 K) as compared to their room temperature (300 K) performance. The operation of integrated circuits at cryogenic temperatures results in an improved performance in terms of increased speed, reduced latch-up susceptibility, reduced leakage current, and reduced thermal noise. However, the switching noise increased at 77 K compared to 300 K. The power control circuits tested in the laboratory did successfully restart at 77 K.

Improving NASA's technology transfer process through increased screening and evaluation in the information dissemination program

NASA Technical Reports Server (NTRS)

Laepple, H.

1979-01-01

The current status of NASA's technology transfer system can be improved if the technology transfer process is better understood. This understanding will only be gained if a detailed knowledge about factors generally influencing technology transfer is developed, and particularly those factors affecting technology transfer from government R and D agencies to industry. Secondary utilization of aerospace technology is made more difficult because it depends on a transfer process which crosses established organizational lines of authority and which is outside well understood patterns of technical applications. In the absence of a sound theory about technology transfer and because of the limited capability of government agencies to explore industry's needs, a team approach to screening and evaluation of NASA generated technologies is proposed which calls for NASA, and other organizations of the private and public sectors which influence the transfer of NASA generated technology, to participate in a screening and evaluation process to determine the commercial feasibility of a wide range of technical applications.

Effective Intramural Publicity

ERIC Educational Resources Information Center

Edwards, R. Wayne

1978-01-01

Suggestions for publicizing a college intramural athletic program include preschool orientation, telephone hot-line, articles in the school newspaper, and commercial newspaper and television promotion. (MJB)

Low-cost Solar Array Project. Feasibility of the Silane Process for Producing Semiconductor-grade Silicon

NASA Technical Reports Server (NTRS)

1979-01-01

The feasibility of Union Carbide's silane process for commercial application was established. An integrated process design for an experimental process system development unit and a commercial facility were developed. The corresponding commercial plant economic performance was then estimated.

Characterization of insertion sites in Rainbow papaya, the first commercialized transgenic tree-fruit crop

USDA-ARS?s Scientific Manuscript database

Inserts and insert sites in transgenic, commercial papaya line 55-1 derivatives Rainbow and SunUp were characterized as part of a petition to Japan to allow import of fresh fruit of these cultivars from the U.S. and to provide data for a larger study aimed at understanding the global impact of DNA t...

OUTLINE FOR OCCUPATIONAL HOME ECONOMICS COURSE IN COMMERCIAL AND INSTITUTIONAL FOOD PREPARATION.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery. Home Economics Service.

THE EXPERIMENTAL OUTLINE IS FOR TEACHER USE IN PLANNING A TWO-SEMESTER COURSE TO PREPARE 11TH AND 12TH GRADE STUDENTS FOR ENTRY LEVEL COMMERCIAL FOOD PREPARATION JOBS SUCH AS FOOD SERVICE WORKERS, COOK HELPERS, CATERER HELPERS, SALAD MAKERS, BAKER HELPERS, SHORT ORDER COOKS, AND TRAY LINE WORKERS. IT WAS DEVELOPED BY VOCATIONAL HOME ECONOMICS…

Copper phytoextraction in tandem with oilseed production using commercial cultivars and mutant lines of sunflower.

PubMed

Kolbas, A; Mench, M; Herzig, R; Nehnevajova, E; Bes, C M

2011-01-01

Use of sunflower (Helianthus annuus L.) for Cu phytoextraction and oilseed production on Cu-contaminated topsoils was investigated in afield trial at a former wood preservation site. Six commercial cultivars and two mutant lines were cultivated in plots with and without the addition of compost (5% w/w) and dolomitic limestone (0.2% w/w). Total soil Cu ranged from 163 to 1170 mg kg(-1). In soil solutions, Cu concentration varied between 0.16-0.93 mg L(-1). The amendment increased soil pH, reduced Cu exposure and promoted sunflower growth. Stem length, shoot and capitulum biomasses, seed yield, and shoot and leaf Cu concentrations were measured. At low total soil Cu, shoot Cu mineralomass was higher in commercial cultivars, Le., Salut, Energic, and Countri, whereas competition and shading affected morphological traits of mutants. Based on shoot yield (7 Mg DW ha(-1)) and Cu concentration, the highest removal was 59 g Cu ha(-1). At high total soil Cu, shoot Cu mineralomass peaked for mutants (e.g., 52 g Cu ha(-1) for Mutant 1 line) and cultivars Energic and Countri. Energic seed yield (3.9 Mg air-DW ha(-1)) would be sufficient to produce oil Phenotype traits and shoot Cu removal depended on sunflower types and Cu exposure.

Microsatellite markers associated with resistance to Marek's disease in commercial layer chickens.

PubMed

McElroy, J P; Dekkers, J C M; Fulton, J E; O'Sullivan, N P; Soller, M; Lipkin, E; Zhang, W; Koehler, K J; Lamont, S J; Cheng, H H

2005-11-01

The objective of the current study was to identify QTL conferring resistance to Marek's disease (MD) in commercial layer chickens. To generate the resource population, 2 partially inbred lines that differed in MD-caused mortality were intermated to produce 5 backcross families. Vaccinated chicks were challenged with very virulent plus (vv+) MD virus strain 648A at 6 d and monitored for MD symptoms. A recent field isolate of the MD virus was used because the lines were resistant to commonly used older laboratory strains. Selective genotyping was employed using 81 microsatellites selected based on prior results with selective DNA pooling. Linear regression and Cox proportional hazard models were used to detect associations between marker genotypes and survival. Significance thresholds were validated by simulation. Seven and 6 markers were significant based on proportion of false positive and false discovery rate thresholds less than 0.2, respectively. Seventeen markers were associated with MD survival considering a comparison-wise error rate of 0.10, which is about twice the number expected by chance, indicating that at least some of the associations represent true effects. Thus, the present study shows that loci affecting MD resistance can be mapped in commercial layer lines. More comprehensive studies are under way to confirm and extend these results.

SM1.3 Seismic Centers Data Acquisition: an introduction to Antelope, EarthWorm, SeisComP and their usage around the world

NASA Astrophysics Data System (ADS)

Pesaresi, Damiano; Sleeman, Reinoud

2010-05-01

Many medium to big size seismic data centers around the world are facing the same question: which software to use to acquire seismic data in real-time? A home-made or a commercial one? Both choices have pros and cons. The in-house development of software usually requires an increased investment in human resources rather than a financial investment. However, the advantage of fully accomplishing your own needs could be put in danger when the software engineer quits the job! Commercial software offers the advantage of being maintained, but it may require both a considerable financial investment and training. The main seismic software data acquisition suites available nowadays are the public domain SeisComP and EarthWorm packages and the commercial package Antelope. Nanometrics, Guralp and RefTek also provide seismic data acquisition software, but they are mainly intended for single station/network acquisition. Antelope is a software package for real-time acquisition and processing of seismic network data, with its roots in the academic seismological community. The software is developed by Boulder Real Time Technology (BRTT) and commercialized by Kinemetrics. It is used by IRIS affiliates for off-line data processing and it is the main acquisition tool for the USArray program and data centers in Europe like the ORFEUS Data Center, OGS (Italy), ZAMG (Austria), ARSO (Slovenia) and GFU (Czech Republic). SeisComP was originally developed for the GEOFON global network to provide a system for data acquisition, data exchange (SeedLink protocol) and automatic processing. It has evolved into to a widely distributed, networked seismographic system for data acquisition and real-time data exchange over Internet and is supported by ORFEUS as the standard seismic data acquisition tool in Europe. SeisComP3 is the next generation of the software and was developed for the German Indonesian Tsunami Early Warning System (GITEWS). SeisComP is licensed by GFZ (free of charge) and maintained by a private company (GEMPA). EarthWorm was originally developed by United States Geological Survey (USGS) to exchange data with the Canadian seismologists. Its is now used by several institution around the world. It is maintained and developed by a commercial software house, ISTI.

On-line access to geoscience bibliographic citations

USGS Publications Warehouse

Wild, Emily C.

2012-01-01

On-line geoscience bibliographic citations and access points to citations are exponentially increasing as commercial, non-profit, and government agencies worldwide publish materials electronically. On-line bibliographic tools capture cited works, and open access content allows for freely obtained citations and documents. For this newsletter, citations from the numerous journals and books listed in the "Recent Papers" section of the EXPLORE newsletters from 2008-2011 were used to provide freely-accessible web sites to determine the availability of bibliographic information.

Comparative analysis of nutritional compositions of transgenic RNAi-mediated virus-resistant bean (event EMB-PV051-1) with its non-transgenic counterpart.

PubMed

Carvalho, José L V; de Oliveira Santos, Juliana; Conte, Carmine; Pacheco, Sidney; Nogueira, Elsa O P L; Souza, Thiago L P O; Faria, Josias C; Aragão, Francisco J L

2015-10-01

Golden mosaic is among the most economically important diseases that severely reduce bean production in Latin America. In 2011, a transgenic bean event named Embrapa 5.1 (EMB-PV051-1), resistant to bean golden mosaic virus, was approved for commercial release in Brazil. The aim of this study was to measure and evaluate the nutritional components of the beans, as well as the anti-nutrient levels in the primary transgenic line and its derived near-isogenic lines after crosses and backcrosses with two commercial cultivars. Nutritional assessment of transgenic crops used for human consumption is an important aspect of safety evaluations. Results demonstrated that the transgenic bean event, cultivated under field conditions, was substantially equivalent to that of the non-transgenic bean plants. In addition, the amounts of the nutritional components are within the range of values observed for several bean commercial varieties grown across a range of environments and seasons.

Technical Note: Development and validation of an open data format for CT projection data.

PubMed

Chen, Baiyu; Duan, Xinhui; Yu, Zhicong; Leng, Shuai; Yu, Lifeng; McCollough, Cynthia

2015-12-01

Lack of access to projection data from patient CT scans is a major limitation for development and validation of new reconstruction algorithms. To meet this critical need, this work developed and validated a vendor-neutral format for CT projection data, which will further be employed to build a library of patient projection data for public access. A digital imaging and communication in medicine (DICOM)-like format was created for CT projection data (CT-PD), named the DICOM-CT-PD format. The format stores attenuation information in the DICOM image data block and stores parameters necessary for reconstruction in the DICOM header under various tags (51 tags to store the geometry and scan parameters and 9 tags to store patient information). To validate the accuracy and completeness of the new format, CT projection data from helical scans of the ACR CT accreditation phantom were acquired from two clinical CT scanners (Somatom Definition Flash, Siemens Healthcare, Forchheim, Germany and Discovery CT750 HD, GE Healthcare, Waukesha, WI). After decoding (by the authors for Siemens, by the manufacturer for GE), the projection data were converted to the DICOM-CT-PD format. Off-line CT reconstructions were performed by internal and external reconstruction researchers using only the information stored in the DICOM-CT-PD files and the DICOM-CT-PD field definitions. Compared with the commercially reconstructed CT images, the off-line reconstructed images created using the DICOM-CT-PD format are similar in terms of CT numbers (differences of 5 HU for the bone insert and -9 HU for the air insert), image noise (±1 HU), and low contrast detectability (6 mm rods visible in both). Because of different reconstruction approaches, slightly different in-plane and cross-plane high contrast spatial resolution were obtained compared to those reconstructed on the scanners (axial plane: GE off-line, 7 lp/cm; GE commercial, 7 lp/cm; Siemens off-line, 8 lp/cm; Siemens commercial, 7 lp/cm. Coronal plane: Siemens off-line, 6 lp/cm; Siemens commercial, 8 lp/cm). A vendor-neutral extended DICOM format has been developed that enables open sharing of CT projection data from third-generation CT scanners. Validation of the format showed that the geometric parameters and attenuation information in the DICOM-CT-PD file were correctly stored, could be retrieved with use of the provided instructions, and contained sufficient data for reconstruction of CT images that approximated those from the commercial scanner.

Augmented Reality Based Navigation for Computer Assisted Hip Resurfacing: A Proof of Concept Study.

PubMed

Liu, He; Auvinet, Edouard; Giles, Joshua; Rodriguez Y Baena, Ferdinando

2018-05-23

Implantation accuracy has a great impact on the outcomes of hip resurfacing such as recovery of hip function. Computer assisted orthopedic surgery has demonstrated clear advantages for the patients, with improved placement accuracy and fewer outliers, but the intrusiveness, cost, and added complexity have limited its widespread adoption. To provide seamless computer assistance with improved immersion and a more natural surgical workflow, we propose an augmented-reality (AR) based navigation system for hip resurfacing. The operative femur is registered by processing depth information from the surgical site with a commercial depth camera. By coupling depth data with robotic assistance, obstacles that may obstruct the femur can be tracked and avoided automatically to reduce the chance of disruption to the surgical workflow. Using the registration result and the pre-operative plan, intra-operative surgical guidance is provided through a commercial AR headset so that the user can perform the operation without additional physical guides. To assess the accuracy of the navigation system, experiments of guide hole drilling were performed on femur phantoms. The position and orientation of the drilled holes were compared with the pre-operative plan, and the mean errors were found to be approximately 2 mm and 2°, results which are in line with commercial computer assisted orthopedic systems today.

Smart Grid Enabled L2 EVSE for the Commercial Market

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weeks, John; Pugh, Jerry

In 2011, the DOE issued Funding Opportunity DE-FOA-0000554 as a means of addressing two major task areas identified by the Grid Integration Tech Team (GITT) that would help transition Electric vehicles from a market driven by early adopters and environmental supporters to a market with mainstream volumes. Per DE-FOA-0000554, these tasks were: To reduce the cost of Electric Vehicle Supply Equipment (EVSE), thereby increasing the likelihood of the build out of EV charging infrastructure. The goal of increasing the number of EVSE available was to ease concerns over range anxiety, and promote the adoption of electric vehicles: To allow EVmore » loads to be managed via the smart grid, thereby maintaining power quality, reliability and affordability, while protecting installed distribution equipment. In December of that year, the DOE awarded one of the two contracts targeted toward commercial EVSE to Eaton, and in early 2012, we began in earnest the process of developing a Smart Grid Enable L2 EVSE for the Commercial Market (hereafter known as the DOE Charger). The design of the Smart Grid Enabled L2 EVSE was based primarily on the FOA requirements along with input from the Electric Transportation Infrastructure product line (hereafter ETI) marketing team who aided in development of the customer requirements.« less

PC-based high-speed video-oculography for measuring rapid eye movements in mice.

PubMed

Sakatani, Tomoya; Isa, Tadashi

2004-05-01

We newly developed an infrared video-oculographic system for on-line tracking of the eye position in awake and head-fixed mice, with high temporal resolution (240 Hz). The system consists of a commercially available high-speed CCD camera and an image processing software written in LabVIEW run on IBM-PC with a plug-in video grabber board. This software calculates the center and area of the pupil by fitting circular function to the pupil boundary, and allows robust and stable tracking of the eye position in small animals like mice. On-line calculation is performed to obtain reasonable circular fitting of the pupil boundary even if a part of the pupil is covered with shadows or occluded by eyelids or corneal reflections. The pupil position in the 2-D video plane is converted to the rotation angle of the eyeball by estimating its rotation center based on the anatomical eyeball model. By this recording system, it is possible to perform quantitative analysis of rapid eye movements such as saccades in mice. This will provide a powerful tool for analyzing molecular basis of oculomotor and cognitive functions by using various lines of mutant mice.

Distributed Finite Element Analysis Using a Transputer Network

NASA Technical Reports Server (NTRS)

Watson, James; Favenesi, James; Danial, Albert; Tombrello, Joseph; Yang, Dabby; Reynolds, Brian; Turrentine, Ronald; Shephard, Mark; Baehmann, Peggy

1989-01-01

The principal objective of this research effort was to demonstrate the extraordinarily cost effective acceleration of finite element structural analysis problems using a transputer-based parallel processing network. This objective was accomplished in the form of a commercially viable parallel processing workstation. The workstation is a desktop size, low-maintenance computing unit capable of supercomputer performance yet costs two orders of magnitude less. To achieve the principal research objective, a transputer based structural analysis workstation termed XPFEM was implemented with linear static structural analysis capabilities resembling commercially available NASTRAN. Finite element model files, generated using the on-line preprocessing module or external preprocessing packages, are downloaded to a network of 32 transputers for accelerated solution. The system currently executes at about one third Cray X-MP24 speed but additional acceleration appears likely. For the NASA selected demonstration problem of a Space Shuttle main engine turbine blade model with about 1500 nodes and 4500 independent degrees of freedom, the Cray X-MP24 required 23.9 seconds to obtain a solution while the transputer network, operated from an IBM PC-AT compatible host computer, required 71.7 seconds. Consequently, the $80,000 transputer network demonstrated a cost-performance ratio about 60 times better than the $15,000,000 Cray X-MP24 system.

Manufacturing of Protected Lithium Electrodes for Advanced Lithium-Air, Lithium-Water & Lithium-Sulfur Batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Visco, Steven J

The global demand for rechargeable batteries is large and growing rapidly. Assuming the adoption of electric vehicles continues to increase, the need for smaller, lighter, and less expensive batteries will become even more pressing. In this vein, PolyPlus Battery Company has developed ultra-light high performance batteries based on its proprietary protected lithium electrode (PLE) technology. The Company’s Lithium-Air and Lithium-Seawater batteries have already demonstrated world record performance (verified by third party testing), and we are developing advanced lithium-sulfur batteries which have the potential deliver high performance at low cost. In this program PolyPlus Battery Company teamed with Corning Incorporated tomore » transition the PLE technology from bench top fabrication using manual tooling to a pre- commercial semi-automated pilot line. At the inception of this program PolyPlus worked with a Tier 1 battery manufacturing engineering firm to design and build the first-of-its-kind pilot line for PLE production. The pilot line was shipped and installed in Berkeley, California several months after the start of the program. PolyPlus spent the next two years working with and optimizing the pilot line and now produces all of its PLEs on this line. The optimization process successfully increased the yield, throughput, and quality of PLEs produced on the pilot line. The Corning team focused on fabrication and scale-up of the ceramic membranes that are key to the PLE technology. PolyPlus next demonstrated that it could take Corning membranes through the pilot line process to produce state-of-the-art protected lithium electrodes. In the latter part of the program the Corning team developed alternative membranes targeted for the large rechargeable battery market. PolyPlus is now in discussions with several potential customers for its advanced PLE-enabled batteries, and is building relationships and infrastructure for the transition into manufacturing. It is likely that the next step will be accomplished through a combination of joint venture partnering and licensing of the technology.« less

7 CFR 1030.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1030.19 Section 1030.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MIDWEST MARKETING AREA Order Regulating Handling Definitions § 1030.19 Commercial food processing...

7 CFR 1030.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1030.19 Section 1030.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MIDWEST MARKETING AREA Order Regulating Handling Definitions § 1030.19 Commercial food processing...

7 CFR 1124.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1124.19 Section 1124.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... NORTHWEST MARKETING AREA Order Regulating Handling Definitions § 1124.19 Commercial food processing...

7 CFR 1124.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1124.19 Section 1124.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... NORTHWEST MARKETING AREA Order Regulating Handling Definitions § 1124.19 Commercial food processing...

7 CFR 1030.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1030.19 Section 1030.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MIDWEST MARKETING AREA Order Regulating Handling Definitions § 1030.19 Commercial food processing...

7 CFR 1124.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1124.19 Section 1124.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... NORTHWEST MARKETING AREA Order Regulating Handling Definitions § 1124.19 Commercial food processing...

7 CFR 1030.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1030.19 Section 1030.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MIDWEST MARKETING AREA Order Regulating Handling Definitions § 1030.19 Commercial food processing...

7 CFR 1124.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1124.19 Section 1124.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... NORTHWEST MARKETING AREA Order Regulating Handling Definitions § 1124.19 Commercial food processing...

7 CFR 1030.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1030.19 Section 1030.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MIDWEST MARKETING AREA Order Regulating Handling Definitions § 1030.19 Commercial food processing...

7 CFR 1124.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1124.19 Section 1124.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... NORTHWEST MARKETING AREA Order Regulating Handling Definitions § 1124.19 Commercial food processing...

Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling.

PubMed

Fafenrot, Susanna; Grimmelsmann, Nils; Wortmann, Martin; Ehrmann, Andrea

2017-10-19

Fused deposition modeling (FDM) is a three-dimensional (3D) printing technology that is usually performed with polymers that are molten in a printer nozzle and placed line by line on the printing bed or the previous layer, respectively. Nowadays, hybrid materials combining polymers with functional materials are also commercially available. Especially combinations of polymers with metal particles result in printed objects with interesting optical and mechanical properties. The mechanical properties of objects printed with two of these metal-polymer blends were compared to common poly (lactide acid) (PLA) printed objects. Tensile tests and bending tests show that hybrid materials mostly containing bronze have significantly reduced mechanical properties. Tensile strengths of the 3D-printed objects were unexpectedly nearly identical with those of the original filaments, indicating sufficient quality of the printing process. Our investigations show that while FDM printing allows for producing objects with mechanical properties similar to the original materials, metal-polymer blends cannot be used for the rapid manufacturing of objects necessitating mechanical strength.

Studies in integrated line-and packet-switched computer communication systems

NASA Astrophysics Data System (ADS)

Maglaris, B. S.

1980-06-01

The problem of efficiently allocating the bandwidth of a trunk to both types of traffic is handled for various system and traffic models. A performance analysis is carried out both for variable and fixed frame schemes. It is shown that variable frame schemes, adjusting the frame length according to the traffic variations, offer better trunk utilization at the cost of the additional hardware and software complexity needed because of the lack of synchronization. An optimization study on the fixed frame schemes follows. The problem of dynamically allocating the fixed frame to both types of traffic is formulated as a Markovian Decision process. It is shown that the movable boundary scheme, suggested for commercial implementations of integrated multiplexors, offers optimal or near optimal performance and simplicity of implementation. Finally, the behavior of the movable boundary integrated scheme is studied for tandem link connections. Under the assumptions made for the line-switched traffic, the forward allocation technique is found to offer the best alternative among different path set-up strategies.

Three-Dimensional (3D) Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling

PubMed Central

Fafenrot, Susanna; Grimmelsmann, Nils; Wortmann, Martin

2017-01-01

Fused deposition modeling (FDM) is a three-dimensional (3D) printing technology that is usually performed with polymers that are molten in a printer nozzle and placed line by line on the printing bed or the previous layer, respectively. Nowadays, hybrid materials combining polymers with functional materials are also commercially available. Especially combinations of polymers with metal particles result in printed objects with interesting optical and mechanical properties. The mechanical properties of objects printed with two of these metal-polymer blends were compared to common poly (lactide acid) (PLA) printed objects. Tensile tests and bending tests show that hybrid materials mostly containing bronze have significantly reduced mechanical properties. Tensile strengths of the 3D-printed objects were unexpectedly nearly identical with those of the original filaments, indicating sufficient quality of the printing process. Our investigations show that while FDM printing allows for producing objects with mechanical properties similar to the original materials, metal-polymer blends cannot be used for the rapid manufacturing of objects necessitating mechanical strength. PMID:29048347

The coping strategies of front-line health workers in the context of user fee exemptions in Niger

PubMed Central

2015-01-01

When user fee exemptions were introduced for children under five years of age in Niger, front-line staff in the health system were not consulted in advance, and various obstacles seriously hindered the policy's implementation. Health workers developed two types of coping strategies. The first dealt with shortcomings of the policy implementation process related to management tools, drug stocks, co-existence of the fee exemption and cost recovery systems, and, above all, supply management for medicines (ordering from private companies, issuing makeshift prescriptions). The second involved clientelism, circumvention of regulations, and misappropriation of resources. Adverse effects have arisen due to both the failings of the health system and the practices of health workers. These include a focus on the commercial management of patients, the most 'costly' of whom sometimes find themselves being refused treatment, patients roaming in search of medicines and treatment, and a decline in quality of care. PMID:26558816

How we went digital without a strategy.

PubMed

Semler, R

2000-01-01

Once you say what business you're in, you put your employees into a mental straitjacket and hand them a ready-made excuse for ignoring new opportunities. So rather than dictate his company's identity, Ricardo Semler--the majority owner of Semco in São Paulo, Brazil--lets his employees shape it through their individual efforts and interests. "I don't know what Semco is," he writes in this first-person account of his company's expansion from manufacturing to Internet services. "Nor do I want to know." Ten years ago, Semco employees who were selling cooling towers to owners of large commercial buildings heard customers complain about the high cost of maintaining the towers. The salespeople proposed a new business in cooling-tower maintenance, and the venture is now a $30 million property-management business. That initiative led to the creation, with Semco's support, of an on-line exchange to facilitate the management of commercial construction projects. The exchange is revolutionizing the construction process in Brazil and has become a springboard for further Web initiatives such as virtual trade shows. The author shares some of the lessons he has learned along the way: Forget about the top line. Never stop being a start-up. Don't be a nanny (treat your employees like adults). Let talent find its place. Make decisions quickly and openly when it comes to reviewing proposals for new businesses. And partner promiscuously: "Our partners," Semler says, "are as much a part of our company as our employees."

High melt strength, tear resistant blown film based on poly(lactic acid)

NASA Astrophysics Data System (ADS)

Edmonds, Neil R.; Plimmer, Peter N.; Tanner, Chris

2015-05-01

A major problem associated with the commercial manufacture of thin films from PLA is inferior processing characteristics on blown film lines compared to low density polyethylene. PLA has poor melt strength (leading to bubble instability) and develops a permanent crease in the flattened film as it exits the tower of the film line. In addition, the thin film product has poor tear strength and an unacceptable `noise' level when converted into flexible packaging. Furthermore, fabricated articles based on PLA are known to show an unattractive tendency toward dimensional instability. This behaviour is associated with `cold crystallization', a phenomenon which also causes exudation of any plasticizer added for improving flexibility. Blow moulded articles based on PLA also exhibit dimensional sensitivity above 60°C. All of these issues have been overcome by the technology described in this paper. This has been accomplished without loss of the valuable compostability characteristic of PLA; this was confirmed by evaluation of film in a commercial composting operation. These results have been achieved through novel reactive compounding technology which: (a) Creates a PLA-rich structure containing long chain crosslinks, (b) generates a low glass transition temperature phase covalently bonded to the PLA structure, and (c) provides a material which performs like LDPE in a blown film manufacturing operation. The technology developed is covered by NZ Patent 580231 (3). The patent is held by UniServices Ltd, The University of Auckland, New Zealand.

41 CFR 102-192.60 - How do we implement these commercial payment processes?

Code of Federal Regulations, 2010 CFR

2010-07-01

... these commercial payment processes? 102-192.60 Section 102-192.60 Public Contracts and Property... ADMINISTRATIVE PROGRAMS 192-MAIL MANAGEMENT Financial Requirements for All Agencies § 102-192.60 How do we implement these commercial payment processes? Guidance on implementing a compliant payment process is in the...

41 CFR 102-192.60 - How do we implement these commercial payment processes?

Code of Federal Regulations, 2011 CFR

2011-01-01

... these commercial payment processes? 102-192.60 Section 102-192.60 Public Contracts and Property... ADMINISTRATIVE PROGRAMS 192-MAIL MANAGEMENT Financial Requirements for All Agencies § 102-192.60 How do we implement these commercial payment processes? Guidance on implementing a compliant payment process is in the...

41 CFR 102-192.60 - How do we implement these commercial payment processes?

Code of Federal Regulations, 2013 CFR

2013-07-01

... these commercial payment processes? 102-192.60 Section 102-192.60 Public Contracts and Property... ADMINISTRATIVE PROGRAMS 192-MAIL MANAGEMENT Financial Requirements for All Agencies § 102-192.60 How do we implement these commercial payment processes? Guidance on implementing a compliant payment process is in the...

41 CFR 102-192.60 - How do we implement these commercial payment processes?

Code of Federal Regulations, 2014 CFR

2014-01-01

... these commercial payment processes? 102-192.60 Section 102-192.60 Public Contracts and Property... ADMINISTRATIVE PROGRAMS 192-MAIL MANAGEMENT Financial Requirements for All Agencies § 102-192.60 How do we implement these commercial payment processes? Guidance on implementing a compliant payment process is in the...

41 CFR 102-192.60 - How do we implement these commercial payment processes?

Code of Federal Regulations, 2012 CFR

2012-01-01

... these commercial payment processes? 102-192.60 Section 102-192.60 Public Contracts and Property... ADMINISTRATIVE PROGRAMS 192-MAIL MANAGEMENT Financial Requirements for All Agencies § 102-192.60 How do we implement these commercial payment processes? Guidance on implementing a compliant payment process is in the...

Harvest Pressure on Coastal Atlantic Cod (Gadus morhua) from Recreational Fishing Relative to Commercial Fishing Assessed from Tag-Recovery Data

PubMed Central

Kleiven, Alf Ring; Fernandez-Chacon, Albert; Nordahl, Jan-Harald; Moland, Even; Espeland, Sigurd Heiberg; Knutsen, Halvor; Olsen, Esben Moland

2016-01-01

Marine recreational fishing is a popular outdoor activity. However, knowledge about the magnitude of recreational catches relative to commercial catches in coastal fisheries is generally sparse. Coastal Atlantic cod (Gadus morhua) is a target species for recreational fishers in the North Atlantic. In Norway, recreational fishers are allowed to use a variety of traps and nets as well as long-line and rod and line when fishing for cod. From 2005 to 2013, 9729 cod (mean size: 40 cm, range: 15–93 cm) were tagged and released in coastal Skagerrak, southeast Norway. Both high-reward (NOK 500) and low-reward tags (NOK 50) were used in this study. Because some harvested fish (even those posting high-reward tags) may go unreported by fishers, reporting rates were estimated from mark-recovery models that incorporate detection parameters in their structure, in addition to survival and mortality estimates. During 2005 to 2013, a total of 1707 tagged cod were recovered and reported by fishers. We estimate the overall annual survival to be 33% (SE 1.5). Recreational rod and line fishing were responsible for 33.7% (SE 2.4) of total mortality, followed by commercial fisheries (15.1% SE 0.8) and recreational fixed gear (6.8% SE 0.4). Natural mortality was 44.4% (SE 2.5) of total mortality. Our findings suggest that recreational fishing—rod and line fishing in particular—is responsible for a substantial part of fishing mortality exerted on coastal cod in southern Norway. PMID:26959371

Harvest Pressure on Coastal Atlantic Cod (Gadus morhua) from Recreational Fishing Relative to Commercial Fishing Assessed from Tag-Recovery Data.

PubMed

Kleiven, Alf Ring; Fernandez-Chacon, Albert; Nordahl, Jan-Harald; Moland, Even; Espeland, Sigurd Heiberg; Knutsen, Halvor; Olsen, Esben Moland

2016-01-01

Marine recreational fishing is a popular outdoor activity. However, knowledge about the magnitude of recreational catches relative to commercial catches in coastal fisheries is generally sparse. Coastal Atlantic cod (Gadus morhua) is a target species for recreational fishers in the North Atlantic. In Norway, recreational fishers are allowed to use a variety of traps and nets as well as long-line and rod and line when fishing for cod. From 2005 to 2013, 9729 cod (mean size: 40 cm, range: 15-93 cm) were tagged and released in coastal Skagerrak, southeast Norway. Both high-reward (NOK 500) and low-reward tags (NOK 50) were used in this study. Because some harvested fish (even those posting high-reward tags) may go unreported by fishers, reporting rates were estimated from mark-recovery models that incorporate detection parameters in their structure, in addition to survival and mortality estimates. During 2005 to 2013, a total of 1707 tagged cod were recovered and reported by fishers. We estimate the overall annual survival to be 33% (SE 1.5). Recreational rod and line fishing were responsible for 33.7% (SE 2.4) of total mortality, followed by commercial fisheries (15.1% SE 0.8) and recreational fixed gear (6.8% SE 0.4). Natural mortality was 44.4% (SE 2.5) of total mortality. Our findings suggest that recreational fishing-rod and line fishing in particular-is responsible for a substantial part of fishing mortality exerted on coastal cod in southern Norway.

A Comparative Study of Heavy Ion and Proton Induced Bit Error Sensitivity and Complex Burst Error Modes in Commercially Available High Speed SiGe BiCMOS

NASA Technical Reports Server (NTRS)

Marshall, Paul; Carts, Marty; Campbell, Art; Reed, Robert; Ladbury, Ray; Seidleck, Christina; Currie, Steve; Riggs, Pam; Fritz, Karl; Randall, Barb

2004-01-01

A viewgraph presentation that reviews recent SiGe bit error test data for different commercially available high speed SiGe BiCMOS chips that were subjected to various levels of heavy ion and proton radiation. Results for the tested chips at different operating speeds are displayed in line graphs.

The Malvinas War from the Argentinian Viewpoint

DTIC Science & Technology

1988-05-01

commercial concern is The Falkland Islands Company. This company owns 80 per cent of the total economic product. Communications are a considerable problem...krill also exists. Additionally, the islands’ strategic position is critical to control of the South Atlantic, with many commercial lines of communication ...the traditional 18 rivalry between services, and the poor communications network to receive orders from the decision centers located on the conti

Plate-Impact Measurements of a Select Model Poly(urethane urea) Elastomer

DTIC Science & Technology

2013-06-01

experiments, and data for polyurea (dashed line) are also included for comparison. .....................................8 List of Tables Table 1...6 1 1. Introduction High-performance polyurea elastomers have recently gained considerable interest throughout the U.S. Department of...studies on high-strain-rate mechanical deformation and modeling (3, 6–11), wherein most are focused on a commercial polyurea . The commercial polyureas

18 CFR 250.6 - Form of application to be filed by distributor under section 7(a), seeking gas service of not...

Code of Federal Regulations, 2012 CFR

2012-04-01

..., commercial and industrial customers for each of the first three years of proposed operations (Mcf at 14.73..., commercial and industrial customers for each of the first three years of proposed operations (Mcf at 14.73... lines, legal fees, financing fees and engineering fees, and briefly state how the estimates were derived...

18 CFR 250.6 - Form of application to be filed by distributor under section 7(a), seeking gas service of not...

Code of Federal Regulations, 2010 CFR

2010-04-01

..., commercial and industrial customers for each of the first three years of proposed operations (Mcf at 14.73..., commercial and industrial customers for each of the first three years of proposed operations (Mcf at 14.73... lines, legal fees, financing fees and engineering fees, and briefly state how the estimates were derived...

18 CFR 250.6 - Form of application to be filed by distributor under section 7(a), seeking gas service of not...

Code of Federal Regulations, 2011 CFR

2011-04-01

..., commercial and industrial customers for each of the first three years of proposed operations (Mcf at 14.73..., commercial and industrial customers for each of the first three years of proposed operations (Mcf at 14.73... lines, legal fees, financing fees and engineering fees, and briefly state how the estimates were derived...

18 CFR 250.6 - Form of application to be filed by distributor under section 7(a), seeking gas service of not...

Code of Federal Regulations, 2013 CFR

2013-04-01

..., commercial and industrial customers for each of the first three years of proposed operations (Mcf at 14.73..., commercial and industrial customers for each of the first three years of proposed operations (Mcf at 14.73... lines, legal fees, financing fees and engineering fees, and briefly state how the estimates were derived...

18 CFR 250.6 - Form of application to be filed by distributor under section 7(a), seeking gas service of not...

Code of Federal Regulations, 2014 CFR

2014-04-01

..., commercial and industrial customers for each of the first three years of proposed operations (Mcf at 14.73..., commercial and industrial customers for each of the first three years of proposed operations (Mcf at 14.73... lines, legal fees, financing fees and engineering fees, and briefly state how the estimates were derived...

7 CFR 1001.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1001.19 Section 1001.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1001.19 Commercial food processing establishment. See...

7 CFR 1007.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1007.19 Section 1007.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1007.19 Commercial food processing establishment. See...

7 CFR 1007.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1007.19 Section 1007.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1007.19 Commercial food processing establishment. See...

7 CFR 1001.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1001.19 Section 1001.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1001.19 Commercial food processing establishment. See...

7 CFR 1033.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1033.19 Section 1033.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1033.19 Commercial food processing establishment. See...

7 CFR 1033.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1033.19 Section 1033.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1033.19 Commercial food processing establishment. See...

7 CFR 1005.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1005.19 Section 1005.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1005.19 Commercial food processing establishment. See...

7 CFR 1126.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1126.19 Section 1126.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1126.19 Commercial food processing establishment. See...

7 CFR 1007.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1007.19 Section 1007.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1007.19 Commercial food processing establishment. See...

7 CFR 1032.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1032.19 Section 1032.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1032.19 Commercial food processing establishment. See...

7 CFR 1007.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1007.19 Section 1007.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1007.19 Commercial food processing establishment. See...

7 CFR 1006.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1006.19 Section 1006.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1006.19 Commercial food processing establishment. See...

7 CFR 1001.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1001.19 Section 1001.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1001.19 Commercial food processing establishment. See...

7 CFR 1001.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1001.19 Section 1001.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1001.19 Commercial food processing establishment. See...

7 CFR 1032.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1032.19 Section 1032.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1032.19 Commercial food processing establishment. See...

7 CFR 1131.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1131.19 Section 1131.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1131.19 Commercial food processing establishment. See...

7 CFR 1033.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1033.19 Section 1033.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1033.19 Commercial food processing establishment. See...

7 CFR 1005.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1005.19 Section 1005.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1005.19 Commercial food processing establishment. See...

7 CFR 1006.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1006.19 Section 1006.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1006.19 Commercial food processing establishment. See...

7 CFR 1033.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1033.19 Section 1033.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1033.19 Commercial food processing establishment. See...

7 CFR 1131.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1131.19 Section 1131.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1131.19 Commercial food processing establishment. See...

7 CFR 1006.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1006.19 Section 1006.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1006.19 Commercial food processing establishment. See...

7 CFR 1033.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1033.19 Section 1033.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1033.19 Commercial food processing establishment. See...

7 CFR 1126.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1126.19 Section 1126.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1126.19 Commercial food processing establishment. See...

7 CFR 1032.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1032.19 Section 1032.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1032.19 Commercial food processing establishment. See...

7 CFR 1131.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1131.19 Section 1131.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1131.19 Commercial food processing establishment. See...

7 CFR 1006.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1006.19 Section 1006.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1006.19 Commercial food processing establishment. See...

7 CFR 1131.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1131.19 Section 1131.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1131.19 Commercial food processing establishment. See...

7 CFR 1005.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1005.19 Section 1005.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1005.19 Commercial food processing establishment. See...

7 CFR 1126.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1126.19 Section 1126.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1126.19 Commercial food processing establishment. See...

7 CFR 1005.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1005.19 Section 1005.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1005.19 Commercial food processing establishment. See...

7 CFR 1126.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1126.19 Section 1126.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1126.19 Commercial food processing establishment. See...

7 CFR 1131.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1131.19 Section 1131.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1131.19 Commercial food processing establishment. See...

7 CFR 1006.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1006.19 Section 1006.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1006.19 Commercial food processing establishment. See...

7 CFR 1032.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1032.19 Section 1032.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1032.19 Commercial food processing establishment. See...

7 CFR 1007.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1007.19 Section 1007.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1007.19 Commercial food processing establishment. See...

7 CFR 1001.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1001.19 Section 1001.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1001.19 Commercial food processing establishment. See...

7 CFR 1126.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1126.19 Section 1126.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1126.19 Commercial food processing establishment. See...

7 CFR 1032.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1032.19 Section 1032.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1032.19 Commercial food processing establishment. See...

7 CFR 1005.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1005.19 Section 1005.19 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL... MARKETING AREA Order Regulating Handling Definitions § 1005.19 Commercial food processing establishment. See...

Detection of the level of fluoride in the commercially available toothpaste using laser induced breakdown spectroscopy with the marker atomic transition line of neutral fluorine at 731.1 nm

NASA Astrophysics Data System (ADS)

Gondal, M. A.; Maganda, Y. W.; Dastageer, M. A.; Al Adel, F. F.; Naqvi, A. A.; Qahtan, T. F.

2014-04-01

Fourth harmonic of a pulsed Nd:YAG laser (wavelength 266 nm) in combination with high resolution spectrograph equipped with Gated ICCD camera has been employed to design a high sensitive analytical system. This detection system is based on Laser Induced Breakdown Spectroscopy and has been tested first time for analysis of semi-fluid samples to detect fluoride content present in the commercially available toothpaste samples. The experimental parameters were optimized to achieve an optically thin and in local thermo dynamic equilibrium plasma. This improved the limits of detection of fluoride present in tooth paste samples. The strong atomic transition line of fluorine at 731.102 nm was used as the marker line to quantify the fluoride concentration levels. Our LIBS system was able to detect fluoride concentration levels in the range of 1300-1750 ppm with a detection limit of 156 ppm.

Improvement of Surface Layer Characteristics by Shot Lining

NASA Astrophysics Data System (ADS)

Harada, Yasunori

In the present study, lining of the metal with foils using shot peening was investigated to improve the surface layer characteristics. In the shot peening experiment, the foils set on the metal are pelted with hard particles traveling at a high velocity. The foils are bonded to the metal surface due to plastic deformation induced by the collision of the particles. The foils and the metal are heated to heighten the bondability because of the reduction of flow stress. Lining the metal with the hard powder sandwiched between two aluminum foil sheets was also attempted. In this experiment, a centrifugal shot peening machine wite an electrical heater was employed. The metals are commercially aluminium alloys and magnesium alloys, and the foils are commercially aluminum, titanium and nickel. The effects of shot speed and the heating temperature on the bondability were examined. Wear resistance was also evaluated by grinding. The foils were successfully bonded to the metal surface. It was found that the present method is effective in improving of surface layer characteristics.

The role of growth hormone in lines of mice divergently selected on body weight.

PubMed

Hastings, I M; Bootland, L H; Hill, W G

1993-04-01

An understanding of the physiological and genetic changes which determine the response to selection is critical for both evolutionary theory and to assess the application of new molecular techniques to commercial animal breeding. We investigated an aspect of physiology, growth hormone (GH) metabolism, which might a priori have been expected to play a large part in the response of mouse lines selected for high or low body weight. Disruption of endogenous GH or addition of exogenous GH had similar proportionate effects on body weight in both lines of mice (although differences in body composition arose) suggesting that neither the production of GH nor receptor sensitivity to GH had been altered as a result of selection. This supports a 'pleiotropic model' of the response to selection: that many genes with diverse metabolic roles all contribute to the divergent phenotype. This result has significant commercial implications as it suggests that artificial selection, transgenic technology and environmental manipulation may be synergistic rather than antagonistic strategies.

Development of a novel recessive genetic male sterility system for hybrid seed production in maize and other cross-pollinating crops.

PubMed

Wu, Yongzhong; Fox, Tim W; Trimnell, Mary R; Wang, Lijuan; Xu, Rui-Ji; Cigan, A Mark; Huffman, Gary A; Garnaat, Carl W; Hershey, Howard; Albertsen, Marc C

2016-03-01

We have developed a novel hybridization platform that utilizes nuclear male sterility to produce hybrids in maize and other cross-pollinating crops. A key component of this platform is a process termed Seed Production Technology (SPT). This process incorporates a transgenic SPT maintainer line capable of propagating nontransgenic nuclear male-sterile lines for use as female parents in hybrid production. The maize SPT maintainer line is a homozygous recessive male sterile transformed with a SPT construct containing (i) a complementary wild-type male fertility gene to restore fertility, (ii) an α-amylase gene to disrupt pollination and (iii) a seed colour marker gene. The sporophytic wild-type allele complements the recessive mutation, enabling the development of pollen grains, all of which carry the recessive allele but with only half carrying the SPT transgenes. Pollen grains with the SPT transgenes exhibit starch depletion resulting from expression of α-amylase and are unable to germinate. Pollen grains that do not carry the SPT transgenes are nontransgenic and are able to fertilize homozygous mutant plants, resulting in nontransgenic male-sterile progeny for use as female parents. Because transgenic SPT maintainer seeds express a red fluorescent protein, they can be detected and efficiently separated from seeds that do not contain the SPT transgenes by mechanical colour sorting. The SPT process has the potential to replace current approaches to pollen control in commercial maize hybrid seed production. It also has important applications for other cross-pollinating crops where it can unlock the potential for greater hybrid productivity through expanding the parental germplasm pool. © 2015 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

Real-time speckle variance swept-source optical coherence tomography using a graphics processing unit.

PubMed

Lee, Kenneth K C; Mariampillai, Adrian; Yu, Joe X Z; Cadotte, David W; Wilson, Brian C; Standish, Beau A; Yang, Victor X D

2012-07-01

Advances in swept source laser technology continues to increase the imaging speed of swept-source optical coherence tomography (SS-OCT) systems. These fast imaging speeds are ideal for microvascular detection schemes, such as speckle variance (SV), where interframe motion can cause severe imaging artifacts and loss of vascular contrast. However, full utilization of the laser scan speed has been hindered by the computationally intensive signal processing required by SS-OCT and SV calculations. Using a commercial graphics processing unit that has been optimized for parallel data processing, we report a complete high-speed SS-OCT platform capable of real-time data acquisition, processing, display, and saving at 108,000 lines per second. Subpixel image registration of structural images was performed in real-time prior to SV calculations in order to reduce decorrelation from stationary structures induced by the bulk tissue motion. The viability of the system was successfully demonstrated in a high bulk tissue motion scenario of human fingernail root imaging where SV images (512 × 512 pixels, n = 4) were displayed at 54 frames per second.

The challenges encountered in the integration of an early test wafer surface scanning inspection system into a 450mm manufacturing line

NASA Astrophysics Data System (ADS)

Lee, Jeffrey; McGarvey, Steve

2013-04-01

The introduction of early test wafer (ETW) 450mm Surface Scanning Inspection Systems (SSIS) into Si manufacturing has brought with it numerous technical, commercial, and logistical challenges on the path to rapid recipe development and subsequent qualification of other 450mm wafer processing equipment. This paper will explore the feasibility of eliminating the Polystyrene Latex Sphere deposition process step and the subsequent creation of SSIS recipes based upon the theoretical optical properties of both the SSIS and the process film stack(s). The process of Polystyrene Latex Sphere deposition for SSIS recipe generation and development is generally accepted on the previous technology nodes for 150/200/300mm wafers. PSL is deposited with a commercially available deposition system onto a non-patterned bare Si or non-patterned filmed Si wafer. After deposition of multiple PSL spots, located in different positions on a wafer, the wafer is inspected on a SSIS and a response curve is generated. The response curve is based on the the light scattering intensity of the NIST certified PSL that was deposited on the wafer. As the initial 450mm Si wafer manufacturing began, there were no inspection systems with sub-90nm sensitivities available for defect and haze level verification. The introduction of a 450mm sub-30nm inspection system into the manufacturing line generated instant challenges. Whereas the 450mm wafers were relatively defect free at 90nm, at 40nm the wafers contained several hundred thousand defects. When PSL was deposited onto wafers with these kinds of defect levels, PSL with signals less than the sub-90nm defects were difficult to extract. As the defectivity level of the wafers from the Si suppliers rapidly improves the challenges of SSIS recipe creation with high defectivity decreases while at the same time the cost of PSL deposition increases. The current cost per wafer is fifteen thousand dollars for a 450mm PSL deposition service. When viewed from the standpoint of the generations of hundreds of SSIS recipes for the global member companies of ISMI, it is simply not economically viable to create all recipes based on PSL based light scattering response curves. This paper will explore the challenges/end results encountered with the PSL based SSIS recipe generation and compare those against the challenges/end results of SSIS recipes generated based strictly upon theoretical Bidirectional reflectance distribution function (BRDF) light scattering modeling. The BRDF modeling will allow for the creation of SSIS recipes without PSL deposition, which is greatly appealing for a multitude of both technical and commercial considerations. This paper will also explore the technical challenges of SSIS recipe generation based strictly upon BRDF modeling.

Experimental Verification of the Use of Metal Filled Via Hole Fences for Crosstalk Control of Microstrip Lines in LTCC Packages

NASA Technical Reports Server (NTRS)

Ponchak, George E.; Chun, Donghoon; Yook, Jong-Gwan; Katehi, Linda P. B.

2001-01-01

Coupling between microstrip lines in dense RF packages is a common problem that degrades circuit performance. Prior three-dimensional-finite element method (3-D-FEM) electromagnetic simulations have shown that metal filled via hole fences between two adjacent microstrip lines actually Increases coupling between the lines: however, if the top of the via posts are connected by a metal strip, coupling is reduced. In this paper, experimental verification of the 3-D-FEM simulations is demonstrated for commercially fabricated low temperature cofired ceramic (LTCC) packages. In addition, measured attenuation of microstrip lines surrounded by the shielding structures is presented and shows that shielding structures do not change the attenuation characteristics of the line.

A comparison of the levels of oil, carotenoids, and lipolytic enzyme activities in modern lines and hybrids of grain sorghum

USDA-ARS?s Scientific Manuscript database

Thirteen modern commercial grain sorghum hybrids and five sorghum lines were extracted and the levels of oil and carotenoids were analyzed and compared. The same samples were also evaluated for lipolytic enzyme activity. The oil content in all eighteen samples ranged from 3.21 to 4.29 wt%. Beta c...

Asbestos Workshop: Sampling, Analysis, and Risk Assessment

DTIC Science & Technology

2012-03-01

coatings Vinyl/asbestos floor tile Automatic transmission components Clutch facings Disc brake pads Drum brake linings Brake blocks Commercial and...A naturally-occurring pliant and fibrous mineral with heat-resistant properties • Serpentine Class: joint compound,‘popcorn’ceilings, brake pads...fabrics, and is used in fire-resistant and insulating materials such as brake linings. The asbestos minerals include chrysotile (white asbestos) and

Real-time separation of multineuron recordings with a DSP32C signal processor.

PubMed

Gädicke, R; Albus, K

1995-04-01

We have developed a hardware and software package for real-time discrimination of multiple-unit activities recorded simultaneously from multiple microelectrodes using a VME-Bus system. Compared with other systems cited in literature or commercially available, our system has the following advantages. (1) Each electrode is served by its own preprocessor (DSP32C); (2) On-line spike discrimination is performed independently for each electrode. (3) The VME-bus allows processing of data received from 16 electrodes. The digitized (62.5 kHz) spike form is itself used as the model spike; the algorithm allows for comparing and sorting complete wave forms in real time into 8 different models per electrode.

Visible CWDM system design for Multi-Gbit/s transmission over SI-POF

NASA Astrophysics Data System (ADS)

Vázquez, Carmen; Pinzón, Plinio Jesús; Pérez, Isabel

2015-01-01

In order to increase the data rates of Multi-Gbit/s links based on large core step index (SI) plastic optical fibers (POF), different modulation scenes have been proposed. Another option is to use multiple optical carriers for parallel transmission of communication channels over the same fiber. Some designs to reach data rates of 14.77 Gb/s in 50 m, with 4 channels have been developed by off line processing. In this work, designs to test the potential of real Multi- Gbit/s transmission systems using commercial products are reported. Special care in designing low insertion loss multiplexers and demultiplexers is carried out to allow for greener solutions in terms of power consumption.

A Procedure for Structural Weight Estimation of Single Stage to Orbit Launch Vehicles (Interim User's Manual)

NASA Technical Reports Server (NTRS)

Martinovic, Zoran N.; Cerro, Jeffrey A.

2002-01-01

This is an interim user's manual for current procedures used in the Vehicle Analysis Branch at NASA Langley Research Center, Hampton, Virginia, for launch vehicle structural subsystem weight estimation based on finite element modeling and structural analysis. The process is intended to complement traditional methods of conceptual and early preliminary structural design such as the application of empirical weight estimation or application of classical engineering design equations and criteria on one dimensional "line" models. Functions of two commercially available software codes are coupled together. Vehicle modeling and analysis are done using SDRC/I-DEAS, and structural sizing is performed with the Collier Research Corp. HyperSizer program.

Double resonance calibration of g factor standards: Carbon fibers as a high precision standard

NASA Astrophysics Data System (ADS)

Herb, Konstantin; Tschaggelar, Rene; Denninger, Gert; Jeschke, Gunnar

2018-04-01

The g factor of paramagnetic defects in commercial high performance carbon fibers was determined by a double resonance experiment based on the Overhauser shift due to hyperfine coupled protons. Our carbon fibers exhibit a single, narrow and perfectly Lorentzian shaped ESR line and a g factor slightly higher than gfree with g = 2.002644 =gfree · (1 + 162ppm) with a relative uncertainty of 15ppm . This precisely known g factor and their inertness qualify them as a high precision g factor standard for general purposes. The double resonance experiment for calibration is applicable to other potential standards with a hyperfine interaction averaged by a process with very short correlation time.

Computerized literature reference system: use of an optical scanner and optical character recognition software.

PubMed

Lossef, S V; Schwartz, L H

1990-09-01

A computerized reference system for radiology journal articles was developed by using an IBM-compatible personal computer with a hand-held optical scanner and optical character recognition software. This allows direct entry of scanned text from printed material into word processing or data-base files. Additionally, line diagrams and photographs of radiographs can be incorporated into these files. A text search and retrieval software program enables rapid searching for keywords in scanned documents. The hand scanner and software programs are commercially available, relatively inexpensive, and easily used. This permits construction of a personalized radiology literature file of readily accessible text and images requiring minimal typing or keystroke entry.

Assembly and testing of a 1.8 by 3.7 meter Fresnel lens solar concentrator

NASA Technical Reports Server (NTRS)

Robertson, J. E.

1977-01-01

A project was initiated to establish a technical data base on line focusing acrylic Fresnel lenses for use in a solar collector system that could generate temperatures in the range of 200 C to 370 C. The effort was originally directed toward electric power generation in the 100 to 10,000 kWe range using a distributed collector approach. However, as the program progressed, it centered on the development of a concentrator/collector subsystem concept that could meet the general requirement of thermal delivery within the 200 C to 370 C range. The expanded list of possible applications includes commercial heating/cooling and industrial process heat as well as electric power generation.

Developing On-line Exams.

ERIC Educational Resources Information Center

Hartsell, Taralynn S.; Yuen, Steve Chi-Yin

2003-01-01

Discusses advantages and limitations of online exams, describes available software tools for creating computer-based tests (CGI, JavaScript, commercial programs, course authoring tools), and offers suggestions for implementation. (JOW)

36 CFR 292.21 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

.../forest/grazing uses may also consist of uses related to and in furtherance of the protection of... transmission line systems, substations, commercial radio transmitters, relays or repeater stations, antennas...

36 CFR 292.21 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

.../forest/grazing uses may also consist of uses related to and in furtherance of the protection of... transmission line systems, substations, commercial radio transmitters, relays or repeater stations, antennas...

47 CFR 73.4017 - Application processing: Commercial FM stations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Application processing: Commercial FM stations. 73.4017 Section 73.4017 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... processing: Commercial FM stations. See Report and Order, MM Docket 84-750, FCC 85-125, adopted March 4, 1985...

7 CFR 944.28 - Avocado Import Grade Regulation.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., seed, or commercial processing into products; prior to or after reconditioning may be exported or..., distribution by relief agencies, seed, or commercial processing into products, but shall be subject to the... importation means release from custody of the United States Customs Service. The term commercial processing...

7 CFR 944.28 - Avocado Import Grade Regulation.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., seed, or commercial processing into products; prior to or after reconditioning may be exported or..., distribution by relief agencies, seed, or commercial processing into products, but shall be subject to the... importation means release from custody of the United States Customs Service. The term commercial processing...

7 CFR 944.28 - Avocado Import Grade Regulation.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., seed, or commercial processing into products; prior to or after reconditioning may be exported or..., distribution by relief agencies, seed, or commercial processing into products, but shall be subject to the... importation means release from custody of the United States Customs Service. The term commercial processing...

7 CFR 944.28 - Avocado Import Grade Regulation.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., seed, or commercial processing into products; prior to or after reconditioning may be exported or..., distribution by relief agencies, seed, or commercial processing into products, but shall be subject to the... importation means release from custody of the United States Customs Service. The term commercial processing...

7 CFR 944.28 - Avocado Import Grade Regulation.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., seed, or commercial processing into products; prior to or after reconditioning may be exported or..., distribution by relief agencies, seed, or commercial processing into products, but shall be subject to the... importation means release from custody of the United States Customs Service. The term commercial processing...

47 CFR 73.4017 - Application processing: Commercial FM stations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Application processing: Commercial FM stations. 73.4017 Section 73.4017 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... processing: Commercial FM stations. See Report and Order, MM Docket 84-750, FCC 85-125, adopted March 4, 1985...

Disturbance of Essential Fish Habitat by Commercial Passive Fishing Gear in the Delaware, Maryland, and Virginia region of the Mid-Atlantic Bight

NASA Astrophysics Data System (ADS)

Schweitzer, C.

2016-02-01

Trap fishing is one of the oldest methods utilized to capture fish, and fish traps are currently one of the most dominant fishing gears utilized by commercial fishermen in the DelMarVa (Delaware, Maryland, Virginia) region. Impacts of traps on benthic habitat and emergent epifauna have become an increasing concern since the 1990's, but despite this, there is little published data regarding trap-habitat interactions. Any substrate necessary for fish spawning, breeding, feeding, or growth to maturity is deemed Essential Fish Habitat (EFH) and in order to increase capture success, traps are often deployed near or on EFH. We assessed the degree of trap impacts via video observations from commercial traps at four common fishing sites in the DelMarVa region, 27-36 km off the coast, at depths of 20-30 m. Two traps within a 20 trap rig were customized by attaching GoPro® cameras to give views in front of the trap, toward the trap front, and to the rear of the trap. Analysis of 123 trap deployments shows that traps often drag across the ocean floor and habitats during the retrieval process. Duration of the dragging phase is strongly correlated with trap position on the line (r2=0.6; p<0.001); traps farther down the line drag significantly longer than traps closer to the boat and first retrieved (1st vs last trap: p<0.01). Dragging significantly increases trap-habitat interactions. Traps with minimal drag have <1% chance of contacting EFH but dragging increases the proportion of traps interacting with EFH to 46%. Observed trap-habitat interactions include: damaging and breaking coral, and running over sea stars, anemones, and bryozoans. Essential fish habitats located off the DelMarVa coast are highly fragmented and sparse, and adverse impacts of passive fishing gear probably affect a large portion of the available habitat.

Prize for Industrial Applications of Physics: Reflective Cholesteric Liquid Crystals - Innovations in Materials, Display Technology, and Commercialization

NASA Astrophysics Data System (ADS)

Khan, Asad

Reflective Cholesteric Liquid Crystals have been the subject of much research, development, and commercialization - in display technology as well as other embodiments, such as sensors, privacy films, etc. The liquid Crystal Institute (LCI) at Kent State University (KSU) served as a hot bed of much of the research and development in this field in the early 1990's. From here, the reflective technology was licensed to Kent Displays (KDI) to further develop and commercialize. The 90's saw some development in flexible technologies, drive scheme, display design, as well as materials. The early part of the century took a turn with a strong effort in encapsulation based flexible display development. In 2006, KDI engineers and technologists started firming up ambitious plans for the world's first roll-to-roll manufacturing line for bistable cholesteric displays. In 2009, this became a reality! In early 2010, the first eWriter product was launched into the consumer market under the brand Boogie Board®. Within months, this became a success forcing the rapid development of the manufacturing process for the flexible displays. Today, the company has two manufacturing lines, 24 hour roll-to-roll production of flexible displays, millions of Boogie Board products in the global market place, and a growing OEM business in the Boogie Board technology. KDI continues to do basic research, development, and exploration in the bistable display field. It also has had to become an expert in the supply chain management of the unique raw materials needed for flexible display manufacturing, while still managing global operations with sales offices in several continents and a growing and diversified group of individuals. In this presentation, we will present the story, research, development, technology, and latest trends in bistable cholesteric liquid crystal materials with a particular emphasis on the eWriter technology and market.

E-configuration structures of EPA and DHA derived from Euphausia superba and their significant inhibitive effects on growth of human cancer cell lines in vitro.

PubMed

Zheng, Weilong; Wang, Xudong; Cao, Wenjing; Yang, Bowen; Mu, Ying; Dong, Yuesheng; Xiu, Zhilong

2017-02-01

Many bioactive components such as poly-unsaturated fatty acids (e.g. EPA and DHA), phospholipids and astaxanthin are known in Antarctic krill (Euphausia superba) oil. The krill DHA and EPA are generally considered to be similar to natural ones. However, two chemical compounds which were separated from Antarctic krill oil and identified as EPA and DHA by HRESIMS and NMR acted much more effective inhibitive activities on growth of several cell lines (U937, K562, SMMC-7721, PC-3, MDA-MB-231, HL60 and MCF-7) than those from sturgeon liver and commercial fish oil. Taking MCF-7 as an example, the IC 50 values of Antarctic krill EPA and DHA were 14.01 and 19.94μM，while the IC 50 values of sturgeon liver and commercial fish EPA and DHA were 81.45, 73.13, 82.11 and 75.31μM, respectively. Raman spectra revealed that the Antarctic krill EPA and DHA have E-configuration structures, which were different from those in commercial fish oil. Additionally, the Antarctic krill EPA and DHA had no effects on human normal liver cell line HL7702. These results indicated that the Antarctic krill E-EPA and E-DHA had a great prospect in cancer therapy. Copyright © 2017 Elsevier Ltd. All rights reserved.

Performances of a date dissemination code on telephone lines using commercial modems

NASA Technical Reports Server (NTRS)

Cordara, F.; Pettiti, V.; Quasso, R.; Rubiola, E.

1993-01-01

A coded time/date information dissemination system (CTD), based on telephone lines and commercial modems, is now in its experimental phase in Italy at IEN. This service, born from a cooperation with other metrological laboratories (TUG, Austria, SNT, Sweden, VSL, The Netherlands), represents an attempt towards an European standardization. Some results of an experimental analysis in which a few modems were tested, both in laboratory conditions and connected to the telephone network, in order to evaluate the timing capability of the system are given. When the system is used in a one-way mode, in many practical cases the modems delay turns out to be the main factor which limits the accuracy, even more than the telephone line delays. If the two-way mode is used, the modems asymmetry, i.e., the delay difference between transmission and reception, is almost always the most important source of uncertainty, provided the link is not including a space segment. Comparing the widely used V.22 modems to the old V.21 ones, the latters turn out to be better both in delay time (30-100 ms V.22, and 7-15 ms V.21) and asymmetry (10-50 micro-s V.22, and 10 ms V.22). Time transfer accuracies of 10 micron-s (same turn) to 100 micro-s (long distance calls) were obtained in two-way mode with commercial V.21 modems.

Elimination of Isoxazolyl-Penicillins antibiotics in waters by the ligninolytic native Colombian strain Leptosphaerulina sp. considerations on biodegradation process and antimicrobial activity removal.

PubMed

Copete-Pertuz, Ledys S; Plácido, Jersson; Serna-Galvis, Efraím A; Torres-Palma, Ricardo A; Mora, Amanda

2018-07-15

In this work, Leptosphaerulina sp. (a Colombian native fungus) significantly removed three Isoxazolyl-Penicillin antibiotics (IP): oxacillin (OXA, 16000 μg L -1 ), cloxacillin (CLX, 17500 μg L -1 ) and dicloxacillin (DCX, 19000 μg L -1 ) from water. The biological treatment was performed at pH 5.6, 28 °C, and 160 rpm for 15 days. The biotransformation process and lack of toxicity of the final solutions (antibacterial activity (AA) and cytotoxicity) were tested. The role of enzymes in IP removal was analysed through in vitro studies with enzymatic extracts (crude and pre-purified) from Leptosphaerulina sp., commercial enzymes and enzymatic inhibitors. Furthermore, the applicability of mycoremediation process to a complex matrix (simulated hospital wastewater) was evaluated. IP were considerably abated by the fungus, OXA was the fastest degraded (day 6), followed by CLX (day 7) and DCX (day 8). Antibiotics biodegradation was associated to laccase and versatile peroxidase action. Assays using commercial enzymes (i.e. laccase from Trametes versicolor and horseradish peroxidase) and inhibitors (EDTA, NaCl, sodium acetate, manganese (II) ions) confirmed the significant role of enzymatic transformation. Whereas, biomass sorption was not an important process in the antibiotics elimination. Evaluation of AA against Staphylococcus aureus ATCC 6538 revealed that Leptosphaerulina sp. also eliminated the AA. In addition, the cytotoxicity assay (MTT) on the HepG2 cell line demonstrated that the IP final solutions were non-toxic. Finally, Leptosphaerulina sp. eliminated OXA and its AA from synthetic hospital wastewater at 6 days. All these results evidenced the potential of Leptosphaerulina sp. mycoremediation as a novel environmentally friendly process for the removal of IP from aqueous systems. Copyright © 2018 Elsevier B.V. All rights reserved.

Characterization of a commercial software defined radio as high frequency lock-in amplifier for FM spectroscopy.

PubMed

Mahnke, Peter

2018-01-01

A commercial software defined radio based on a Rafael Micro R820T2 tuner is characterized for the use as a high-frequency lock-in amplifier for frequency modulation spectroscopy. The sensitivity limit of the receiver is 1.6 nV/Hz. Frequency modulation spectroscopy is demonstrated on the 6406.69 cm -1 absorption line of carbon monoxide.

Characterization of a commercial software defined radio as high frequency lock-in amplifier for FM spectroscopy

NASA Astrophysics Data System (ADS)

Mahnke, Peter

2018-01-01

A commercial software defined radio based on a Rafael Micro R820T2 tuner is characterized for the use as a high-frequency lock-in amplifier for frequency modulation spectroscopy. The sensitivity limit of the receiver is 1.6 nV/√{Hz }. Frequency modulation spectroscopy is demonstrated on the 6406.69 cm-1 absorption line of carbon monoxide.

41 CFR 105-60.405 - Processing requests for confidential commercial information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MATERIALS 60.4-Described Records § 105-60.405 Processing requests for confidential commercial information... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Processing requests for confidential commercial information. 105-60.405 Section 105-60.405 Public Contracts and Property Management...

7 CFR 946.140 - Handling potatoes for commercial processing into products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Handling potatoes for commercial processing into... AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Rules and Regulations Modification of Inspection Requirements § 946.140 Handling potatoes for commercial processing into products. Pursuant to § 946.54(a)(6...

7 CFR 946.140 - Handling potatoes for commercial processing into products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Handling potatoes for commercial processing into... AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Rules and Regulations Modification of Inspection Requirements § 946.140 Handling potatoes for commercial processing into products. Pursuant to § 946.54(a)(6...

7 CFR 946.140 - Handling potatoes for commercial processing into products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Handling potatoes for commercial processing into... AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Rules and Regulations Modification of Inspection Requirements § 946.140 Handling potatoes for commercial processing into products. Pursuant to § 946.54(a)(6...

7 CFR 946.140 - Handling potatoes for commercial processing into products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Handling potatoes for commercial processing into... AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Rules and Regulations Modification of Inspection Requirements § 946.140 Handling potatoes for commercial processing into products. Pursuant to § 946.54(a)(6...

7 CFR 946.140 - Handling potatoes for commercial processing into products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Handling potatoes for commercial processing into... AGRICULTURE IRISH POTATOES GROWN IN WASHINGTON Rules and Regulations Modification of Inspection Requirements § 946.140 Handling potatoes for commercial processing into products. Pursuant to § 946.54(a)(6...

Comparison of egg and high yielding MDCK cell-derived live attenuated influenza virus for commercial production of trivalent influenza vaccine: in vitro cell susceptibility and influenza virus replication kinetics in permissive and semi-permissive cells.

PubMed

Hussain, Althaf I; Cordeiro, Melissa; Sevilla, Elizabeth; Liu, Jonathan

2010-05-14

Currently MedImmune manufactures cold-adapted (ca) live, attenuated influenza vaccine (LAIV) from specific-pathogen free (SPF) chicken eggs. Difficulties in production scale-up and potential exposure of chicken flocks to avian influenza viruses especially in the event of a pandemic influenza outbreak have prompted evaluation and development of alternative non-egg based influenza vaccine manufacturing technologies. As part of MedImmune's effort to develop the live attenuated influenza vaccine (LAIV) using cell culture production technologies we have investigated the use of high yielding, cloned MDCK cells as a substrate for vaccine production by assessing host range and virus replication of influenza virus produced from both SPF egg and MDCK cell production technologies. In addition to cloned MDCK cells the indicator cell lines used to evaluate the impact of producing LAIV in cells on host range and replication included two human cell lines: human lung carcinoma (A549) cells and human muco-epidermoid bronchiolar carcinoma (NCI H292) cells. The influenza viruses used to infect the indicators cell lines represented both the egg and cell culture manufacturing processes and included virus strains that composed the 2006-2007 influenza seasonal trivalent vaccine (A/New Caledonia/20/99 (H1N1), A/Wisconsin/67/05 (H3N2) and B/Malaysia/2506/04). Results from this study demonstrate remarkable similarity between influenza viruses representing the current commercial egg produced and developmental MDCK cell produced vaccine production platforms. MedImmune's high yielding cloned MDCK cells used for the cell culture based vaccine production were highly permissive to both egg and cell produced ca attenuated influenza viruses. Both the A549 and NCI H292 cells regardless of production system were less permissive to influenza A and B viruses than the MDCK cells. Irrespective of the indicator cell line used the replication properties were similar between egg and the cell produced influenza viruses. Based on these study results we conclude that the MDCK cell produced and egg produced vaccine strains are highly comparable. Copyright 2010 Elsevier Ltd. All rights reserved.

The genetic basis of pectoralis major myopathies in modern broiler chicken lines

PubMed Central

Bailey, Richard A.; Watson, Kellie A.; Bilgili, S. F.; Avendano, Santiago

2015-01-01

This is the first report providing estimates of the genetic basis of breast muscle myopathies (BMM) and their relationship with growth and yield in broiler chickens. In addition, this paper addresses the hypothesis that genetic selection for increase breast yield has contributed to the onset of BMM. Data were analyzed from ongoing recording of BMM within the Aviagen breeding program. This study focused on three BMM: deep pectoral myopathy (DPM; binary trait), white striping (WS; 4 categories) and wooden breast (WB; 3 categories). Data from two purebred commercial broiler lines (A and B) were utilized providing greater than 40,000 meat quality records per line. The difference in selection history between these two lines has resulted in contrasting breast yield (BY): 29% for Line A and 21% for Line B. Data were analyzed to estimate genetic parameters using a multivariate animal model including six traits: body weight (BW), processing body weight (PW), BY, DPM, WB, and WS, in addition to the appropriate fixed effects and permanent environmental effect of the dam. Results indicate similar patterns of heritability and genetic correlations for the two lines. Heritabilities (h2) of BW, PW and BY ranged from 0.271–0.418; for DPM and WB h2 <0.1; and for WS h2 ≤0.338. Genetic correlations between the BMM and BW, PW, or BY were ≤0.132 in Line A and ≤0.248 in Line B. This paper demonstrates the polygenic nature of these traits and the low genetic relationships with BW, PW, and BY, which facilitates genetic improvement across all traits in a balanced breeding program. It also highlights the importance of understanding the environmental and/or management factors that contribute greater than 65% of the variance in the incidence of white striping of breast muscle and more than 90% of the variance of the incidence of wooden breast and deep pectoral myopathy in broiler chickens. PMID:26476091

Field validation of protocols developed to evaluate in-line mastitis detection systems.

PubMed

Kamphuis, C; Dela Rue, B T; Eastwood, C R

2016-02-01

This paper reports on a field validation of previously developed protocols for evaluating the performance of in-line mastitis-detection systems. The protocols outlined 2 requirements of these systems: (1) to detect cows with clinical mastitis (CM) promptly and accurately to enable timely and appropriate treatment and (2) to identify cows with high somatic cell count (SCC) to manage bulk milk SCC levels. Gold standard measures, evaluation tests, performance measures, and performance targets were proposed. The current study validated the protocols on commercial dairy farms with automated in-line mastitis-detection systems using both electrical conductivity (EC) and SCC sensor systems that both monitor at whole-udder level. The protocol for requirement 1 was applied on 3 commercial farms. For requirement 2, the protocol was applied on 6 farms; 3 of them had low bulk milk SCC (128×10(3) cells/mL) and were the same farms as used for field evaluation of requirement 1. Three farms with high bulk milk SCC (270×10(3) cells/mL) were additionally enrolled. The field evaluation methodology and results were presented at a workshop including representation from 7 international suppliers of in-line mastitis-detection systems. Feedback was sought on the acceptance of standardized performance evaluation protocols and recommended refinements to the protocols. Although the methodology for requirement 1 was relatively labor intensive and required organizational skills over an extended period, no major issues were encountered during the field validation of both protocols. The validation, thus, proved the protocols to be practical. Also, no changes to the data collection process were recommended by the technology supplier representatives. However, 4 recommendations were made to refine the protocols: inclusion of an additional analysis that ignores small (low-density) clot observations in the definition of CM, extension of the time window from 4 to 5 milkings for timely alerts for CM, setting a maximum number of 10 milkings for the time window to detect a CM episode, and presentation of sensitivity for a larger range of false alerts per 1,000 milkings replacing minimum performance targets. The recommended refinements are discussed with suggested changes to the original protocols. The information presented is intended to inform further debate toward achieving international agreement on standard protocols to evaluate performance of in-line mastitis-detection systems. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Avenues and incentives for commercial use of a low-gravity environment

NASA Technical Reports Server (NTRS)

Brown, R. L.; Zoller, L. K.

1981-01-01

The scientific and commercial utilization of the low-g environments for materials research and for process and product development is considered. Any products of commercial interest which necessitate processing in space will probably be low volume, high value items. To encourage the commercialization of materials processing in low-g, NASA, in parallel with establishing and demonstrating the scientific/technological precepts for analyzing and using a low-g environment, is establishing the legal and management mechanisms to share in the cost and risk of early commercial ventures, and is now working with commercial firms on a case-by basis to explore applications of this new technology to specific needs of the company.

Characterization of 193-nm resists for optical mask manufacturing

NASA Astrophysics Data System (ADS)

Fosshaug, Hans; Paulsson, Adisa; Berzinsh, Uldis; Magnusson, Helena

2004-12-01

The push for smaller linewidths and tighter critical dimension (CD) budgets forced manufacturers of optical pattern generators to move from traditional i-line to deep ultraviolet (DUV) resist processing. Entering the DUV area was not without pain. The process conditions, especially exposure times of a few hours, put very tough demands on the resist material itself. However, today 248nm laser writers are fully operating using a resist process that exhibits the requested resolution, CD uniformity and environmental stability. The continuous demands of CD performance made Micronic to investigate suitable resist candidate materials for the next generation optical writer using 193nm excimer laser exposure. This paper reports on resist benchmarking of one commercial as well as several newly developed resists. The resists were investigated using a wafer scanner. The data obtained illustrate the current performance of 193nm photoresists, and further demonstrate that despite good progress in resist formulation optimization, the status is still a bit from the required lithographic performance.

76 FR 28662 - Industrial, Commercial, and Institutional Boilers and Process Heaters and Commercial and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-18

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Parts 60 and 63 [EPA-HQ-OAR-2002-0058; EPA-HQ-2003-0119; FRL-9308-6] RIN 2060-AQ25; 2060-AO12 Industrial, Commercial, and Institutional Boilers and Process Heaters and Commercial and Industrial Solid Waste Incineration Units AGENCY: Environmental Protection...

Scalable cell alignment on optical media substrates.

PubMed

Anene-Nzelu, Chukwuemeka G; Choudhury, Deepak; Li, Huipeng; Fraiszudeen, Azmall; Peh, Kah-Yim; Toh, Yi-Chin; Ng, Sum Huan; Leo, Hwa Liang; Yu, Hanry

2013-07-01

Cell alignment by underlying topographical cues has been shown to affect important biological processes such as differentiation and functional maturation in vitro. However, the routine use of cell culture substrates with micro- or nano-topographies, such as grooves, is currently hampered by the high cost and specialized facilities required to produce these substrates. Here we present cost-effective commercially available optical media as substrates for aligning cells in culture. These optical media, including CD-R, DVD-R and optical grating, allow different cell types to attach and grow well on them. The physical dimension of the grooves in these optical media allowed cells to be aligned in confluent cell culture with maximal cell-cell interaction and these cell alignment affect the morphology and differentiation of cardiac (H9C2), skeletal muscle (C2C12) and neuronal (PC12) cell lines. The optical media is amenable to various chemical modifications with fibronectin, laminin and gelatin for culturing different cell types. These low-cost commercially available optical media can serve as scalable substrates for research or drug safety screening applications in industry scales. Copyright © 2013 Elsevier Ltd. All rights reserved.

Wax transfer printing to enable robust barrier definition in devices based on non-standard porous materials

NASA Astrophysics Data System (ADS)

To, Anthony; Downs, Corey; Fu, Elain

2017-05-01

Wax printing has become a common method of fabricating channels in cellulose-based microfluidic devices. However, a limitation of wax printing is that it is restricted to relatively thin, smooth substrates that are compatible with processing by a commercial wax printer. In the current report, we describe a simple patterning method that extends the utility of wax printers for creating hydrophobic barriers on non-standard porous substrates via a process called wax transfer printing. We demonstrate the use of multiple wax transfer cycles to create well-defined, robust, and reproducible barriers in a thick cellulose substrate that is not compatible with feeding through a wax printer. We characterize the method for (i) wax spreading within the substrate as a function of heating time, (ii) the ability to create functional barriers in a substrate, and (iii) reproducibility in line width.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, P.L.

As the Oct. 31 deadline for an initial design review approaches, the four participants in the Energy Research and Development Administration's (ERDA) industrial process hot water program are putting the final touches to plans for solar systems that will supplement conventional energy sources in the textile, food processing, concrete block and cleaning industries. Participating in the project are AAI Corp., Baltimore, which designed a solar hot water system for the concrete block curing operation of York Building Products Co., Harrisburg, Pa.; Acurex Corp., Mountain View, Calif., which designed a solar hot water system for a can washing line at themore » Campbell Soup Co. plant in Sacramento, Calif.; General Electric Co., Philadelphia, which designed a solar hot water system for Riegel Textile Corp., La France, S.C.; and Jacobs Engineering Co., Pasadena, Calif., which designed a solar hot water and steam system for commercial laundry use at American Linen Supply in El Centro., Calif. (MCW)« less

High Resolution, High Precision I-Line Stepper Processing

NASA Astrophysics Data System (ADS)

Yanazawa, H.; Hasegawa, N.; Kurosaki, T.; Hashimoto, N.; Nonogaki, S.

1985-06-01

Currently, the integrated MOS dynamic RAM has as many as 256 thousand memory cells per chip based on 2 pm photolithography. Figure 1 shows the history and the prospects for progress in microfabrication technology. Feature size versus year, as reported by Bossung in 1978, is shown, as developed from independent analysis by Moore, Noyce and Gnostic concept. Circles numbered 1 and 2 show that 64K- and 256K-bit RAMs were developed in 1981 and 1984, and that their feature sizes were 3μm and 2μm, respectively. It is significant that the predictions and the real developments are so close. Furthermore, since the basic process for 3 M-bit RAMs based on 1.3μm microlithography has already been reported in conference, it is highly likely that they will become commercially available around 1987, as predicted by the circle numbered 3 based on 1.3μm microlithography.

A series connection architecture for large-area organic photovoltaic modules with a 7.5% module efficiency.

PubMed

Hong, Soonil; Kang, Hongkyu; Kim, Geunjin; Lee, Seongyu; Kim, Seok; Lee, Jong-Hoon; Lee, Jinho; Yi, Minjin; Kim, Junghwan; Back, Hyungcheol; Kim, Jae-Ryoung; Lee, Kwanghee

2016-01-05

The fabrication of organic photovoltaic modules via printing techniques has been the greatest challenge for their commercial manufacture. Current module architecture, which is based on a monolithic geometry consisting of serially interconnecting stripe-patterned subcells with finite widths, requires highly sophisticated patterning processes that significantly increase the complexity of printing production lines and cause serious reductions in module efficiency due to so-called aperture loss in series connection regions. Herein we demonstrate an innovative module structure that can simultaneously reduce both patterning processes and aperture loss. By using a charge recombination feature that occurs at contacts between electron- and hole-transport layers, we devise a series connection method that facilitates module fabrication without patterning the charge transport layers. With the successive deposition of component layers using slot-die and doctor-blade printing techniques, we achieve a high module efficiency reaching 7.5% with area of 4.15 cm(2).

Pre-clinical laboratory evaluation of the new 'AF' arterial line filter range.

PubMed

Yarham, Gemma; Mulholland, John

2010-07-01

The presence of emboli was recognised relatively early in the history of open heart surgery. The emboli produced during cardiopulmonary bypass have the predisposition to distribute into, and ultimately obstruct, microvessels of all tissues. The Sorin Group has recently developed a new range of arterial line filters. Before the Sorin AF range of filters was released for pre-launch clinical trials, our group performed in vitro laboratory testing of the AF range against a selection of commercially available filters on the global market. The Sorin AF620 and AF640 demonstrate both the smallest prime volume and smallest surface contact area (92ml and 290 cm(2), respectively).The results of the GME Handling Efficiency experiments ranged by 39.6%, from 95.9% to 56.3%. In terms of an air bolus handling, the results of the Limit Bolus experiment ranged by 97 ml, from 147.5 ml down to 50 ml. The pressure drop across all the filters was measured under steady state experimental conditions. All of the above investigations were considered against surface area and prime volume. It is clear from the results that some commercially available arterial line filters perform better than others, not only in overall performance, but also with regard to individual characteristics. Evaluating arterial line filters for hospital-specific use has to balance pressure drop, surface area, micro air handling, prime volume and gross air handling; all points need to be considered. In the AF620 and AF640, Sorin boast that they are the two smallest prime and smallest surface area filters commercially available on the global market. The Sorin AF filter range performs well in all of the areas we investigated and will be a competitive option for centres, irrespective of which characteristics they use to evaluate and select their arterial line filter.

Towards more reliable automated multi-dose dispensing: retrospective follow-up study on medication dose errors and product defects.

PubMed

Palttala, Iida; Heinämäki, Jyrki; Honkanen, Outi; Suominen, Risto; Antikainen, Osmo; Hirvonen, Jouni; Yliruusi, Jouko

2013-03-01

To date, little is known on applicability of different types of pharmaceutical dosage forms in an automated high-speed multi-dose dispensing process. The purpose of the present study was to identify and further investigate various process-induced and/or product-related limitations associated with multi-dose dispensing process. The rates of product defects and dose dispensing errors in automated multi-dose dispensing were retrospectively investigated during a 6-months follow-up period. The study was based on the analysis of process data of totally nine automated high-speed multi-dose dispensing systems. Special attention was paid to the dependence of multi-dose dispensing errors/product defects and pharmaceutical tablet properties (such as shape, dimensions, weight, scored lines, coatings, etc.) to profile the most suitable forms of tablets for automated dose dispensing systems. The relationship between the risk of errors in dose dispensing and tablet characteristics were visualized by creating a principal component analysis (PCA) model for the outcome of dispensed tablets. The two most common process-induced failures identified in the multi-dose dispensing are predisposal of tablet defects and unexpected product transitions in the medication cassette (dose dispensing error). The tablet defects are product-dependent failures, while the tablet transitions are dependent on automated multi-dose dispensing systems used. The occurrence of tablet defects is approximately twice as common as tablet transitions. Optimal tablet preparation for the high-speed multi-dose dispensing would be a round-shaped, relatively small/middle-sized, film-coated tablet without any scored line. Commercial tablet products can be profiled and classified based on their suitability to a high-speed multi-dose dispensing process.

Evaluation criteria for commercially oriented materials processing in space proposals

NASA Technical Reports Server (NTRS)

Moore, W. F.; Mcdowell, J. R.

1979-01-01

An approach and criteria for evaluating NASA funded experiments and demonstrations which have commercial potential were developed. Methods for insuring quick initial screening of commercial proposals are presented. Recommendations are given for modifying the current evaluation approach. New criteria for evaluating commercially orientated materials processing in space (MPS) proposals are introduced. The process for selection of qualified individuals to evaluate the phases of this approach and criteria is considered and guidelines are set for its implementation.

Characterization of a hypoallergenic wheat line lacking ω-5 gliadin.

PubMed

Kohno, Kunie; Takahashi, Hitoshi; Endo, Takashi R; Matsuo, Hiroaki; Shiwaku, Kuninori; Morita, Eishin

2016-10-01

There is no curative treatment for wheat-dependent exercise-induced anaphylaxis (WDEIA). ω-5 Gliadin is one of the dominant allergens affecting WDEIA patients. The use of ω-5 gliadin-free wheat flour in the regular diet is considered one of the prophylactic approaches against the elicitation of allergic symptoms and sensitization to ω-5 gliadin. We sought to find hypoallergenic bread wheat (or common wheat) that lacked the genes encoding ω-5 gliadin and to evaluate its in vitro allergenicity. We also aimed to evaluate the sensitization ability of one of the selected hypoallergenic wheat lines by using a possible animal model of wheat allergy. We screened the deletion lines of bread wheat by western blotting to ascertain common wheat lines lacking the ω-5 gliadin locus. The deletion lines we used have partial deficiency of chromosome 1B (Endo and Gill, 1996). To assess sensitization ability of gluten from the selected deletion line, guinea pigs were fed with either the gluten from the selected deletion line or commercially available gluten, and allergic score was evaluated after challenging the same gluten preparations. We found that a deletion line 1BS-18 had the least deficiency of chromosome 1B among the deletion stocks lacking the ω-5 gliadin locus. The challenge test using the guinea pigs revealed that the symptoms induced by application of the 1BS-18 gluten were much less than that of commercially available gluten. The deletion line 1BS-18, which lacked the ω-5 gliadin locus, is likely to have a low sensitization capacity in the guinea pig. The use of the wheat products of the 1BS-18 line in daily life may provide a feasible solution for the onset of wheat allergy. Copyright © 2016 Japanese Society of Allergology. Production and hosting by Elsevier B.V. All rights reserved.

AUTOMATED ANALYSIS OF AQUEOUS SAMPLES CONTAINING PESTICIDES, ACIDIC/BASIC/NEUTRAL SEMIVOLATILES AND VOLATILE ORGANIC COMPOUNDS BY SOLID PHASE EXTRACTION COUPLED IN-LINE TO LARGE VOLUME INJECTION GC/MS

EPA Science Inventory

Data is presented on the development of a new automated system combining solid phase extraction (SPE) with GC/MS spectrometry for the single-run analysis of water samples containing a broad range of organic compounds. The system uses commercially available automated in-line 10-m...

A Riboproteomic Platform to Identify Novel Targets for Prostate Cancer Therapy

DTIC Science & Technology

2015-10-01

cell lines derived from RWPE1 prostatic epithelial cells after exposure to N-methyl-N- nitrosourea (MNU) (these cell lines are commercially available...is well established that the malignancy of cells is strongly linked to and dependent on aberrant protein synthesis . Current knowledge clearly...highlights deregulation of protein synthesis , in the development of prostate cancer, through aberrant activation of classical signaling pathways. It has

Customization of Discriminant Function Analysis for Prediction of Solar Flares

DTIC Science & Technology

2005-03-01

lives such as telecommunication, commercial airlines, electrical power , wireless services, and terrestrial weather tracking and forecasting...the 1800’s can wreak havoc on today’s power , fuel, and telecommunication lines and finds its origin in solar activity. Enormous amounts of solar...inducing potential differences across large areas of the surface. Earth-bound power , fuel, and telecommunication lines grounded to the Earth provide an

77 FR 65356 - Fisheries of the Caribbean, Gulf of Mexico and South Atlantic; Snapper-Grouper Fishery Off the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-26

... commercial annual catch limit (ACL) between the longline and hook-and-line components. Seventy-five percent... and 25 percent of the ACL, or 135,324 lb (61,382 kg), gutted weight, would be allocated to the hook... trip limit was originally intended to allow hook-and-line fishermen access to golden tilefish in the...

NGS analysis identified differentially expressed coding and microRNA genes in ALV-like spontaneous tumors potentially contributing to tumorigenicity in susceptible chickens

USDA-ARS?s Scientific Manuscript database

It is documented that some experimental and commercial lines of chickens develop spontaneous ALV-like tumors. It is also documented that MDV-2 or ALV-E or both escalate the incidence of such tumors. In one ADOL chicken line, known as rapid feathering susceptible (RFS), the observed tumor incidence w...

Optimization of an Optical Inspection System Based on the Taguchi Method for Quantitative Analysis of Point-of-Care Testing

PubMed Central

Yeh, Chia-Hsien; Zhao, Zi-Qi; Shen, Pi-Lan; Lin, Yu-Cheng

2014-01-01

This study presents an optical inspection system for detecting a commercial point-of-care testing product and a new detection model covering from qualitative to quantitative analysis. Human chorionic gonadotropin (hCG) strips (cut-off value of the hCG commercial product is 25 mIU/mL) were the detection target in our study. We used a complementary metal-oxide semiconductor (CMOS) sensor to detect the colors of the test line and control line in the specific strips and to reduce the observation errors by the naked eye. To achieve better linearity between the grayscale and the concentration, and to decrease the standard deviation (increase the signal to noise ratio, S/N), the Taguchi method was used to find the optimal parameters for the optical inspection system. The pregnancy test used the principles of the lateral flow immunoassay, and the colors of the test and control line were caused by the gold nanoparticles. Because of the sandwich immunoassay model, the color of the gold nanoparticles in the test line was darkened by increasing the hCG concentration. As the results reveal, the S/N increased from 43.48 dB to 53.38 dB, and the hCG concentration detection increased from 6.25 to 50 mIU/mL with a standard deviation of less than 10%. With the optimal parameters to decrease the detection limit and to increase the linearity determined by the Taguchi method, the optical inspection system can be applied to various commercial rapid tests for the detection of ketamine, troponin I, and fatty acid binding protein (FABP). PMID:25256108

MHD-EMP protection guidelines

NASA Astrophysics Data System (ADS)

Barnes, P. R.; Vance, E. F.

A nuclear detonation at altitudes several hundred kilometers above the earth will severely distort the earth's magnetic field and result in a strong magnetohydrodynamic electromagnetic pulse (MHD-EMP). The geomagnetic disturbance interacts with the soil to induce current and horizontal electric gradients. MHD-EMP, also called E3 since it is the third component of the high-altitude EMP (HEMP), lasts over 100 s after an exoatmospheric burst. MHD-EMP is similar to solar geomagnetic storms in it's global and low frequency (less than 1 Hz) nature except that E3 can be much more intense with a far shorter duration. When the MHD-EMP gradients are integrated over great distances by power lines, communication cables, or other long conductors, the induced voltages are significant. (The horizontal gradients in the soil are too small to induce major responses by local interactions with facilities.) The long pulse waveform for MHD-EMP-induced currents on long lines has a peak current of 200 A and a time-to-half-peak of 100 s. If this current flows through transformer windings, it can saturate the magnetic circuit and cause 60 Hz harmonic production. To mitigate the effects of MHD-EMP on a facility, long conductors must be isolated from the building and the commercial power harmonics and voltage swings must be addressed. The transfer switch would be expected to respond to the voltage fluctuations as long as the harmonics have not interfered with the switch control circuitry. The major sources of MHD-EMP induced currents are the commercial power lines and neutral; neutral current indirect coupling to the facility power or ground system via the metal fence, powered gate, parking lights, etc; metal water pipes; phone lines; and other long conductors that enter or come near the facility. The major source of harmonics is the commercial power system.

Commercial Product Activation Using RFID

NASA Technical Reports Server (NTRS)

Jedrey, Thomas

2008-01-01

Radio-frequency identification (RFID) would be used for commercial product activation, according to a proposal. What is new here is the concept of combining RFID with activation - more specifically, using RFID for activating commercial products (principally, electronic ones) and for performing such ancillary functions as tracking individual product units on production lines, tracking shipments, and updating inventories. According to the proposal, an RFID chip would be embedded in each product. The information encoded in the chip would include a unique number for identifying the product. An RFID reader at the point of sale would record the number of the product and would write digital information to the RFID chip for either immediate activation of the product or for later interrogation and processing. To be practical, an RFID product-activation system should satisfy a number of key requirements: the system should be designed to be integrable into the inventory-tracking and the data-processing and -communication infrastructures of businesses along the entire supply chain from manufacture to retail; the system should be resistant to sophisticated hacking; activation codes should be made sufficiently complexity to minimize the probability of activating stolen products; RFID activation equipment at points of sale must be capable to two-way RF communication for the purposes of reading information from, and writing information to, embedded RFID chips; the equipment at points of sale should be easily operable by sales clerks with little or no training; the point-of-sale equipment should verify activation and provide visible and/or audible signals indicating verification or lack thereof; and, the system should be able to handle millions of products per year with minimal human intervention, among other requirements.

Possible 6-qubit NMR quantum computer device material; simulator of the NMR line width

NASA Astrophysics Data System (ADS)

Hashi, K.; Kitazawa, H.; Shimizu, T.; Goto, A.; Eguchi, S.; Ohki, S.

2002-12-01

For an NMR quantum computer, splitting of an NMR spectrum must be larger than a line width. In order to find a best device material for a solid-state NMR quantum computer, we have made a simulation program to calculate the NMR line width due to the nuclear dipole field by the 2nd moment method. The program utilizes the lattice information prepared by commercial software to draw a crystal structure. By applying this program, we can estimate the NMR line width due to the nuclear dipole field without measurements and find a candidate material for a 6-qubit solid-state NMR quantum computer device.

Destruction of Bacillus cereus spores in a thick soy bean paste (doenjang) by continuous ohmic heating with five sequential electrodes.

PubMed

Ryang, J H; Kim, N H; Lee, B S; Kim, C T; Rhee, M S

2016-07-01

This study selected spores from Bacillus cereus FSP-2 strain (the isolate from a commercial doenjang processing line) as the test strain which showed significantly higher thermal resistance (P < 0·05) than B. cereus reference strain (ATCC 27348). The spores in doenjang were subjected to ohmic heating (OH) at 95, 105, 115 and 125°C for 30, 60 or 90 s using a five sequential electrode system (electrical field: 26·7 V cm(-1) ; alternating current frequency: 25 kHz). OH at 105°C for 30-90 s reduced the B. cereus spore count in doenjang samples to <4 log CFU g(-1) . Since OH treatment at 115 and 125°C caused a perceivable colour change in the product (>1·5 National Bureau of Standards units), treatment at 105°C for 60 s was selected and applied on a large scale (500 kg of product). Reliable and reproducible destruction of B. cereus spores occurred; the reductions achieved (to < 4 log CFU g(-1) ) met the Korean national standards. Scanning electron microscopy revealed microstructural alterations in the spores (shrinkage and a distorted outer spore coat). OH is an effective method for destroying B. cereus spores to ensure the microbiological quality and safety of a thick, highly viscous sauce. This study shows that an ohmic heating (OH) using a five sequential electrode system can effectively destroy highly heat-resistant Bacillus cereus spores which have been frequently found in a commercial doenjang processing line without perceivable quality change in the product. In addition, it may demonstrate high potential of the unique OH system used in this study that will further contribute to ensure microbiological quality and safety of crude sauces containing high levels of electrolyte other than doenjang as well. © 2016 The Society for Applied Microbiology.

Biosafety management and commercial use of genetically modified crops in China.

PubMed

Li, Yunhe; Peng, Yufa; Hallerman, Eric M; Wu, Kongming

2014-04-01

As a developing country with relatively limited arable land, China is making great efforts for development and use of genetically modified (GM) crops to boost agricultural productivity. Many GM crop varieties have been developed in China in recent years; in particular, China is playing a leading role in development of insect-resistant GM rice lines. To ensure the safe use of GM crops, biosafety risk assessments are required as an important part of the regulatory oversight of such products. With over 20 years of nationwide promotion of agricultural biotechnology, a relatively well-developed regulatory system for risk assessment and management of GM plants has been developed that establishes a firm basis for safe use of GM crops. So far, a total of seven GM crops involving ten events have been approved for commercial planting, and 5 GM crops with a total of 37 events have been approved for import as processing material in China. However, currently only insect-resistant Bt cotton and disease-resistant papaya have been commercially planted on a large scale. The planting of Bt cotton and disease-resistant papaya have provided efficient protection against cotton bollworms and Papaya ringspot virus (PRSV), respectively. As a consequence, chemical application to these crops has been significantly reduced, enhancing farm income while reducing human and non-target organism exposure to toxic chemicals. This article provides useful information for the colleagues, in particular for them whose mother tongue is not Chinese, to clearly understand the biosafety regulation and commercial use of genetically modified crops in China.

UTM Technical Capabilities Level 2 (TLC2) Test at Reno-Stead Airport.

NASA Image and Video Library

2016-10-06

Test of Unmanned Aircraft Systems Traffic Management (UTM) technical capability Level 2 (TCL2) at Reno-Stead Airport, Nevada. During the test, five drones simultaneously crossed paths, separated by altitude. Two drones flew beyond visual line-of-sight and three flew within line-of-sight of their operators. Drone Co-habitation Services operates a Phantom 3 commercial multi-rotor unmanned aircraft, one of 11 vehicles in the UTM TCL2 demonstration that will fly beyond line of sight of the pilot in command in Nevada test.

Off-line robot programming and graphical verification of path planning

NASA Technical Reports Server (NTRS)

Tonkay, Gregory L.

1989-01-01

The objective of this project was to develop or specify an integrated environment for off-line programming, graphical path verification, and debugging for robotic systems. Two alternatives were compared. The first was the integration of the ASEA Off-line Programming package with ROBSIM, a robotic simulation program. The second alternative was the purchase of the commercial product IGRIP. The needs of the RADL (Robotics Applications Development Laboratory) were explored and the alternatives were evaluated based on these needs. As a result, IGRIP was proposed as the best solution to the problem.

Molecular and cellular characteristics of hybrid vigour in a commercial hybrid of Chinese cabbage.

PubMed

Saeki, Natsumi; Kawanabe, Takahiro; Ying, Hua; Shimizu, Motoki; Kojima, Mikiko; Abe, Hiroshi; Okazaki, Keiichi; Kaji, Makoto; Taylor, Jennifer M; Sakakibara, Hitoshi; Peacock, W James; Dennis, Elizabeth S; Fujimoto, Ryo

2016-02-17

Heterosis or hybrid vigour is a phenomenon in which hybrid progeny exhibit superior performance compared to their parental inbred lines. Most commercial Chinese cabbage cultivars are F1 hybrids and their level of hybrid vigour is of critical importance and is a key selection criterion in the breeding system. We have characterized the heterotic phenotype of one F1 hybrid cultivar of Chinese cabbage and its parental lines from early- to late-developmental stages of the plants. Hybrid cotyledons are larger than those of the parents at 4 days after sowing and biomass in the hybrid, determined by the fresh weight of leaves, is greater than that of the larger parent line by approximately 20% at 14 days after sowing. The final yield of the hybrid harvested at 63 days after sowing is 25% greater than the yield of the better parent. The larger leaves of the hybrid are a consequence of increased cell size and number of the photosynthetic palisade mesophyll cells and other leaf cells. The accumulation of plant hormones in the F1 was within the range of the parental levels at both 2 and 10 days after sowing. Two days after sowing, the expression levels of chloroplast-targeted genes in the cotyledon cells were upregulated in the F1 hybrid relative to their mid parent values. Shutdown of chlorophyll biosynthesis in the cotyledon by norflurazon prevented the increased leaf area in the F1 hybrid. In the cotyledons of F1 hybrids, chloroplast-targeted genes were upregulated at 2 days after sowing. The increased activity levels of this group of genes suggested that their differential transcription levels could be important for establishing early heterosis but the increased transcription levels were transient. Inhibition of the photosynthetic process in the cotyledon reduced heterosis in later seedling stages. These observations suggest early developmental events in the germinating seedling of the hybrid may be important for later developmental vigour and yield advantage.

An update of commercial infrared sensing and imaging instruments

NASA Technical Reports Server (NTRS)

Kaplan, Herbert

1989-01-01

A classification of infrared sensing instruments by type and application, listing commercially available instruments, from single point thermal probes to on-line control sensors, to high speed, high resolution imaging systems is given. A review of performance specifications follows, along with a discussion of typical thermographic display approaches utilized by various imager manufacturers. An update report on new instruments, new display techniques and newly introduced features of existing instruments is given.

CFD Extraction Tool for TecPlot From DPLR Solutions

NASA Technical Reports Server (NTRS)

Norman, David

2013-01-01

This invention is a TecPlot macro of a computer program in the TecPlot programming language that processes data from DPLR solutions in TecPlot format. DPLR (Data-Parallel Line Relaxation) is a NASA computational fluid dynamics (CFD) code, and TecPlot is a commercial CFD post-processing tool. The Tec- Plot data is in SI units (same as DPLR output). The invention converts the SI units into British units. The macro modifies the TecPlot data with unit conversions, and adds some extra calculations. After unit conversions, the macro cuts a slice, and adds vectors on the current plot for output format. The macro can also process surface solutions. Existing solutions use manual conversion and superposition. The conversion is complicated because it must be applied to a range of inter-related scalars and vectors to describe a 2D or 3D flow field. It processes the CFD solution to create superposition/comparison of scalars and vectors. The existing manual solution is cumbersome, open to errors, slow, and cannot be inserted into an automated process. This invention is quick and easy to use, and can be inserted into an automated data-processing algorithm.

Evaluation of microbial stability, bioactive compounds, physicochemical properties, and consumer acceptance of pomegranate juice processed in a commercial scale pulsed electric field system

USDA-ARS?s Scientific Manuscript database

This paper investigated the feasibility for pasteurizing raw pomegranate juice in a commercial scale pulsed electric field (PEF) system. The juice was processed in a commercial scale PEF processing system at 35 and 38 kV/cm for 281 µs at 55 degree C with a flow rate of 100 L/h. Effect of PEF process...

Commercial sex work or ukuphanda? Sex-for-money exchange in Soweto and Hammanskraal area, South Africa.

PubMed

Wojcicki, Janet Maia

2002-09-01

This article introduces the concept of ukuphanda, a Zulu verb that is used to describe the sex-for-money exchanges that take place outside of commercial sex work in Soweto and Hammanskraal area, South Africa. In line with the ethnographic literature from others areas of sub-Saharan Africa, it is argued that women who exchange sex for money in taverns do not self-identify as commercial sex workers and experience less stigma from the community. Unlike commercial sex work (as characterized by the commercial sex work in Hillbrow, Johannesburg), which is understood to be associated with short skirts and other revealing attire, sex-for-money exchange in the taverns is viewed as more private, ambiguous and informal. Women who work as informal sex workers, or "-phandela imali" ('try to get money'), are understood to be using sex-for-money exchange to survive financially.

LIBS Analysis for Coal

NASA Astrophysics Data System (ADS)

E. Romero, Carlos; De Saro, Robert

Coal is a non-uniform material with large inherent variability in composition, and other important properties, such as calorific value and ash fusion temperature. This quality variability is very important when coal is used as fuel in steam generators, since it affects boiler operation and control, maintenance and availability, and the extent and treatment of environmental pollution associated with coal combustion. On-line/in situ monitoring of coal before is fed into a boiler is a necessity. A very few analytical techniques like X-ray fluorescence and prompt gamma neutron activation analysis are available commercially with enough speed and sophistication of data collection for continuous coal monitoring. However, there is still a need for a better on-line/in situ technique that has higher selectivity, sensitivity, accuracy and precision, and that is safer and has a lower installation and operating costs than the other options. Laser induced breakdown spectroscopy (LIBS) is ideal for coal monitoring in boiler applications as it need no sample preparation, it is accurate and precise it is fast, and it can detect all of the elements of concern to the coal-fired boiler industry. LIBS data can also be adapted with advanced data processing techniques to provide real-time information required by boiler operators nowadays. This chapter summarizes development of LIBS for on-line/in situ coal applications in utility boilers.

High-speed line-scan camera with digital time delay integration

NASA Astrophysics Data System (ADS)

Bodenstorfer, Ernst; Fürtler, Johannes; Brodersen, Jörg; Mayer, Konrad J.; Eckel, Christian; Gravogl, Klaus; Nachtnebel, Herbert

2007-02-01

Dealing with high-speed image acquisition and processing systems, the speed of operation is often limited by the amount of available light, due to short exposure times. Therefore, high-speed applications often use line-scan cameras, based on charge-coupled device (CCD) sensors with time delayed integration (TDI). Synchronous shift and accumulation of photoelectric charges on the CCD chip - according to the objects' movement - result in a longer effective exposure time without introducing additional motion blur. This paper presents a high-speed color line-scan camera based on a commercial complementary metal oxide semiconductor (CMOS) area image sensor with a Bayer filter matrix and a field programmable gate array (FPGA). The camera implements a digital equivalent to the TDI effect exploited with CCD cameras. The proposed design benefits from the high frame rates of CMOS sensors and from the possibility of arbitrarily addressing the rows of the sensor's pixel array. For the digital TDI just a small number of rows are read out from the area sensor which are then shifted and accumulated according to the movement of the inspected objects. This paper gives a detailed description of the digital TDI algorithm implemented on the FPGA. Relevant aspects for the practical application are discussed and key features of the camera are listed.

Printed silver nanowire antennas with low signal loss at high-frequency radio.

PubMed

Komoda, Natsuki; Nogi, Masaya; Suganuma, Katsuaki; Kohno, Kazuo; Akiyama, Yutaka; Otsuka, Kanji

2012-05-21

Silver nanowires are printable and conductive, and are believed to be promising materials in the field of printed electronics. However, the resistivity of silver nanowire printed lines is higher than that of metallic particles or flakes even when sintered at high temperatures of 100-400 °C. Therefore, their applications have been limited to the replacement of transparent electrodes made from high-resistivity materials, such as doped metallic oxides, conductive polymers, carbon nanotubes, or graphenes. Here we report that using printed silver nanowire lines, signal losses obtained in the high-frequency radio were lower than those obtained using etched copper foil antennas, because their surfaces were much smoother than those of etched copper foil antennas. This was the case even though the resistivity of silver nanowire lines was 43-71 μΩ cm, which is much higher than that of etched copper foil (2 μΩ cm). When printed silver nanowire antennas were heated at 100 °C, they achieved signal losses that were much lower than those of silver paste antennas comprising microparticles, nanoparticles, and flakes. Furthermore, using a low temperature process, we succeeded in remotely controlling a commercialized radio-controlled car by transmitting a 2.45 GHz signal via a silver nanowire antenna printed on a polyethylene terephthalate film.

On-line integration of computer controlled diagnostic devices and medical information systems in undergraduate medical physics education for physicians.

PubMed

Hanus, Josef; Nosek, Tomas; Zahora, Jiri; Bezrouk, Ales; Masin, Vladimir

2013-01-01

We designed and evaluated an innovative computer-aided-learning environment based on the on-line integration of computer controlled medical diagnostic devices and a medical information system for use in the preclinical medical physics education of medical students. Our learning system simulates the actual clinical environment in a hospital or primary care unit. It uses a commercial medical information system for on-line storage and processing of clinical type data acquired during physics laboratory classes. Every student adopts two roles, the role of 'patient' and the role of 'physician'. As a 'physician' the student operates the medical devices to clinically assess 'patient' colleagues and records all results in an electronic 'patient' record. We also introduced an innovative approach to the use of supportive education materials, based on the methods of adaptive e-learning. A survey of student feedback is included and statistically evaluated. The results from the student feedback confirm the positive response of the latter to this novel implementation of medical physics and informatics in preclinical education. This approach not only significantly improves learning of medical physics and informatics skills but has the added advantage that it facilitates students' transition from preclinical to clinical subjects. Copyright © 2011 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Finite Element Method (FEM) Modeling of Freeze-drying: Monitoring Pharmaceutical Product Robustness During Lyophilization.

PubMed

Chen, Xiaodong; Sadineni, Vikram; Maity, Mita; Quan, Yong; Enterline, Matthew; Mantri, Rao V

2015-12-01

Lyophilization is an approach commonly undertaken to formulate drugs that are unstable to be commercialized as ready to use (RTU) solutions. One of the important aspects of commercializing a lyophilized product is to transfer the process parameters that are developed in lab scale lyophilizer to commercial scale without a loss in product quality. This process is often accomplished by costly engineering runs or through an iterative process at the commercial scale. Here, we are highlighting a combination of computational and experimental approach to predict commercial process parameters for the primary drying phase of lyophilization. Heat and mass transfer coefficients are determined experimentally either by manometric temperature measurement (MTM) or sublimation tests and used as inputs for the finite element model (FEM)-based software called PASSAGE, which computes various primary drying parameters such as primary drying time and product temperature. The heat and mass transfer coefficients will vary at different lyophilization scales; hence, we present an approach to use appropriate factors while scaling-up from lab scale to commercial scale. As a result, one can predict commercial scale primary drying time based on these parameters. Additionally, the model-based approach presented in this study provides a process to monitor pharmaceutical product robustness and accidental process deviations during Lyophilization to support commercial supply chain continuity. The approach presented here provides a robust lyophilization scale-up strategy; and because of the simple and minimalistic approach, it will also be less capital intensive path with minimal use of expensive drug substance/active material.

Avenues and incentives for commercial use of a low-g environment

NASA Technical Reports Server (NTRS)

Brown, R. L.; Zoller, L. K.

1981-01-01

The processing of materials in a low-gravity (low-g) or microgravity environment is investigated by NASA for scientific and commercial utilization, and process and product development. The elimination of gravity is shown to create unique materials, and improve ground-based processes, such as convection, sedimentation, buoyancy, and containerless processing. Commercial applications are discussed, including the manufacturing of silicon ribbon, turbine blades, and various pharmaceuticals in space. Commercial incentives and needs are also discussed, including the technical exchange agreement, in which NASA and a company agree to cooperate in the conduct and analysis of research programs. In addition to establishing and demonstrating scientific and technological precepts for analyzing and using low-g environments, NASA is establishing legal and management mechanisms to share cost and risk of early commercial ventures.

Goals and hurdles for a successful implementation of genomic selection in breeding programme for selected annual and perennial crops.

PubMed

Jonas, Elisabeth; de Koning, Dirk Jan

Genomic Selection is an important topic in quantitative genetics and breeding. Not only does it allow the full use of current molecular genetic technologies, it stimulates also the development of new methods and models. Genomic selection, if fully implemented in commercial farming, should have a major impact on the productivity of various agricultural systems. But suggested approaches need to be applicable in commercial breeding populations. Many of the published research studies focus on methodologies. We conclude from the reviewed publications, that a stronger focus on strategies for the implementation of genomic selection in advanced breeding lines, introduction of new varieties, hybrids or multi-line crosses is needed. Efforts to find solutions for a better prediction and integration of environmental influences need to continue within applied breeding schemes. Goals of the implementation of genomic selection into crop breeding should be carefully defined and crop breeders in the private sector will play a substantial part in the decision-making process. However, the lack of published results from studies within, or in collaboration with, private companies diminishes the knowledge on the status of genomic selection within applied breeding programmes. Studies on the implementation of genomic selection in plant breeding need to evaluate models and methods with an enhanced emphasis on population-specific requirements and production environments. Adaptation of methods to breeding schemes or changes to breeding programmes for a better integration of genomic selection strategies are needed across species. More openness with a continuous exchange will contribute to successes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunter, S. R.; Daniel, A.

The purpose of the Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC and Southwire Company was to jointly develop a low cost, commercially viable, water-repellant anti-icing coating system for high voltage transmission lines. Icing of power lines and other structures caused by freezing rain events occurs annually in the United States, and leads to severe and prolonged power outages. These outages cause untold economic and personal distress for many American families and businesses. Researchers at the Department of Energy?s Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee have previously developed a set of superhydrophobic coatings with remarkable anti-icingmore » properties that could potentially be sprayed or painted onto high-tension power lines and pylons. These coatings drastically reduce ice accumulation on these structures during freezing rain events. The project involved obtaining technical input, supplies and test high voltage cables from Southwire, along with the joint development of anti-icing coating techniques, which would result in a commercial license agreement between Southwire and ORNL, and potentially other companies requiring water repellent anti-icing coatings.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunter, Scott Robert

The purpose of the Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC and Southwire Company was to jointly develop a low cost, commercially viable, water-repellant anti-icing coating system for high voltage transmission lines. Icing of power lines and other structures caused by freezing rain events occurs annually in the United States, and leads to severe and prolonged power outages. These outages cause untold economic and personal distress for many American families and businesses. Researchers at the Department of Energy s Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee have previously developed a set of superhydrophobic coatings with remarkablemore » anti-icing properties that could potentially be sprayed or painted onto high-tension power lines and pylons. These coatings drastically reduce ice accumulation on these structures during freezing rain events. The project involved obtaining technical input, supplies and test high voltage cables from Southwire, along with the joint development of anti-icing coating techniques, which would result in a commercial license agreement between Southwire and ORNL, and potentially other companies requiring water repellent anti-icing coatings.« less

Relative disease susceptibility and clostridial toxin antibody responses in three commercial broiler lines coinfected with Clostridium perfringens and Eimeria maxima using an experimental model of necrotic enteritis.

PubMed

Jang, Seung I; Lillehoj, Hyun S; Lee, Sung-Hyen; Lee, Kyung Woo; Lillehoj, Erik P; Hong, Yeong Ho; An, Dong-Jun; Jeoung, D Hye-Young; Chun, Ji-Eun

2013-09-01

Necrotic enteritis is an enteric disease of poultry resulting from infection by Clostridium perfringens with coinfection by Eimeria spp. constituting a major risk factor for disease pathogenesis. This study compared three commercial broiler chicken lines using an experimental model of necrotic enteritis. Day-old male Cobb, Ross, and Hubbard broilers were orally infected with viable C. perfringens and E. maxima and fed a high-protein diet to promote the development of experimental disease. Body weight loss, intestinal lesions, and serum antibody levels against alpha-toxin and necrotic enteritis B-like (NetB) toxin were measured as parameters of disease susceptibility and host immune response. Cobb chickens exhibited increased body weight loss compared with Ross and Hubbard breeds and greater gut lesion severity compared with Ross chickens. NetB antibody levels were greater in Cobb chickens compared with the Ross or Hubbard groups. These results suggest that Cobb chickens may be more susceptible to necrotic enteritis in the field compared with the Ross and Hubbard lines.

The Introgression of RNAi Silencing of γ-Gliadins into Commercial Lines of Bread Wheat Changes the Mixing and Technological Properties of the Dough

PubMed Central

Gil-Humanes, Javier; Pistón, Fernando; Giménez, María J.; Martín, Antonio; Barro, Francisco

2012-01-01

In the present work the effects on dough quality by the down-regulation of γ-gliadins in different genetic backgrounds of bread wheat were investigated. RNAi-mediated silencing of γ-gliadins was introgressed by conventional crossing into three commercial bread wheat lines (namely ‘Gazul’, ‘Podenco’ and ‘Arpain’), and along with the transgenic line A1152 (cv. Bobwhite) compared with their respective wild types. The protein fractions were quantified by RP-HPLC, whereas the technological and mixing properties were assessed by SDSS test and by the Mixograph instrument. Principal component analysis (PCA) was carried out for both the wild types and the transgenic lines, showing differences in the factors affecting the technological and mixing properties of the dough as a consequence of the reduction of the γ-gliadins. In transgenic lines, the α- and ω-gliadins, and total gliadins negatively affected the dough strength and tolerance to over-mixing, whereas the L/H ratio showed the opposite effect, positively influencing the dough quality. The increase of the SDSS volume in the transgenic lines of ‘Gazul’, ‘Podenco’ and ‘Arpain’ indicates increased gluten strength and quality respect to the wild types. SDSS volume was found to be positively influenced by the amount of glutenins, which were also increased in the transgenic lines. In addition, a positive effect was observed in the MT, PR1 and RBD in some of the transgenic lines of ‘Podenco’ and ‘Arpain’. In conclusion, the down-regulation of γ-gliadins resulted in stronger doughs and a better tolerance to over-mixing in some transgenic lines. Although the reduction of γ-gliadins seems not to have a direct effect on the mixing and bread-making properties, the compensatory effect on the synthesis of the other prolamins may result in stronger doughs with improved over-mixing resistance. PMID:23029328

Evaluation of a Three-Channel High-Temperature Superconducting Magnetometer System

DTIC Science & Technology

1997-06-01

achieved by the best commercially available fluxgate magnetometers demonstrated to date and is only surpassed by low temperature superconducting...wire lines carry the analog SQUID magnetometer signal as well as dc power and ground, and the fiberoptic lines carry digital clock and data signals...with the magnetometers mounted on the three-sensor probe used in the sensor evaluated here. This probe is not highly stabilized with respect to the

Metabolomic assessment of key maize resources: GC-MS and NMR profiling of grain from B73 hybrids of the nested association mapping (NAM) founders and of geographically diverse landraces

USDA-ARS?s Scientific Manuscript database

The present study expands metabolomic assessments of maize beyond commercial elite lines to include two sets of publicly available lines used extensively in the scientific community to investigate the genetic basis of complex plant traits or that may serve as a source of new alleles for improving mo...

A Toolkit for Designing User Interfaces

DTIC Science & Technology

1990-03-01

as the NPS IB can provide prototyping capability. Interface generators are available commercially for nearly every computing machine on the market ...structure which holds attributes of the message buffer window is shown in Figure 4.2. The variables nlines and nchars hold the number of lines in the...window its appearance of scrolling 46 /* define a type and structure for the message buffer */ struct messbuf( long nlines ; /* number of lines in the

A Case Study of the Impediments to the Commercialization of Research at the University of Kentucky.

PubMed

Vanderford, Nathan L; Marcinkowski, Elizabeth

2015-01-01

The commercialization of university-based research occurs to varying degrees between academic institutions. Previous studies have found that multiple barriers can impede the effectiveness and efficiency by which academic research is commercialized. This case study was designed to analyze the status of the commercialization activity at the University of Kentucky via a survey and interview with a successful academic entrepreneur in order to determine the impediments the individual perceived during the commercialization process. The study also garnered insight from the individual as to how the commercialization process could be improved. Issues with infrastructure were highlighted as the most significant barrier faced by the individual. The research subject also suggested that commercialization activity may generally increase if a number of factors were mitigated. Such insight can be communicated to the administrative leadership of the commercialization process at the University of Kentucky. Long term, improving university-based research commercialization will allow academic researchers to be more active and successful entrepreneurs such that intellectual property will progress more freely to the marketplace for the benefit of inventors, universities, and society.

Michigan transportation facts & figures : marine

DOT National Transportation Integrated Search

2002-08-17

This on-line document is part of a series, Transportation Facts & Figures, by the Michigan Department of Transportation (MDOT). The Marine section of Transportation Facts & Figures cover such topics as commercial ports, commodities carried, and ferry...

76 FR 64300 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... Halibut and Sablefish IFQ Program provides economic stability for the commercial hook-and-line fishery... years of management as an open access fishery, while maintaining the social and economic character of...

49 CFR 178.33-5 - Material.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Containers, and Linings § 178.33-5 Material. (a) Uniform quality steel plate such as black plate, electro-tin plate, hot dipped tin plate, tern plate or other commercially accepted can making plate; or nonferrous...

49 CFR 178.33-5 - Material.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Containers, and Linings § 178.33-5 Material. (a) Uniform quality steel plate such as black plate, electro-tin plate, hot dipped tin plate, tern plate or other commercially accepted can making plate; or nonferrous...

49 CFR 178.33-5 - Material.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Containers, and Linings § 178.33-5 Material. (a) Uniform quality steel plate such as black plate, electro-tin plate, hot dipped tin plate, tern plate or other commercially accepted can making plate; or nonferrous...

49 CFR 178.33-5 - Material.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Containers, and Linings § 178.33-5 Material. (a) Uniform quality steel plate such as black plate, electro-tin plate, hot dipped tin plate, tern plate or other commercially accepted can making plate; or nonferrous...

7 CFR 273.1 - Household concept.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Act or a non disease-related, severe, permanent disability may be considered, together with his or her... or her spouse) exceeds 165 percent of the poverty line. (3) Boarders. (i) Residents of a commercial...

7 CFR 273.1 - Household concept.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Act or a non disease-related, severe, permanent disability may be considered, together with his or her... or her spouse) exceeds 165 percent of the poverty line. (3) Boarders. (i) Residents of a commercial...

7 CFR 273.1 - Household concept.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Act or a non disease-related, severe, permanent disability may be considered, together with his or her... or her spouse) exceeds 165 percent of the poverty line. (3) Boarders. (i) Residents of a commercial...

National Niemann-Pick Disease Foundation

MedlinePlus

... Disease Registry News & Media NNPDF Newsletters Foundation NewsLine Print Resources Video Resources NNPDF Webinars Vision of Hope ... nor does it host or receive funding from advertising or from the display of commercial content. This ...

Performance optimization in mass production of volume holographic optical elements (vHOEs) using Bayfol HX photopolymer film

NASA Astrophysics Data System (ADS)

Bruder, Friedrich-Karl; Fäcke, Thomas; Grote, Fabian; Hagen, Rainer; Hönel, Dennis; Koch, Eberhard; Rewitz, Christian; Walze, Günther; Wewer, Brita

2017-05-01

Volume Holographic Optical Elements (vHOEs) gained wide attention as optical combiners for the use in smart glasses and augmented reality (SG and AR, respectively) consumer electronics and automotive head-up display applications. The unique characteristics of these diffractive grating structures - being lightweight, thin and flat - make them perfectly suitable for use in integrated optical components like spectacle lenses and car windshields. While being transparent in Off-Bragg condition, they provide full color capability and adjustable diffraction efficiency. The instant developing photopolymer Bayfol® HX film provides an ideal technology platform to optimize the performance of vHOEs in a wide range of applications. Important for any commercialization are simple and robust mass production schemes. In this paper, we present an efficient and easy to control one-beam recording scheme to copy a so-called master vHOE in a step-and-repeat process. In this contact-copy scheme, Bayfol® HX film is laminated to a master stack before being exposed by a scanning laser line. Subsequently, the film is delaminated in a controlled fashion and bleached. We explain working principles of the one-beam copy concept, discuss the opto-mechanical construction and outline the downstream process of the installed vHOE replication line. Moreover, we focus on aspects like performance optimization of the copy vHOE, the bleaching process and the suitable choice of protective cover film in the re-lamination step, preparing the integration of the vHOE into the final device.

Food equipment manufacturer takes a slice out of its scrap rate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernard, D.; Hannahs, J.; Carter, M.

1996-09-01

The PMI Food Equipment Group began manufacturing circular slicer knives for its commercial Hobart line of slicers in the early 1930s. The company manufacturers the only cast knife in the food industry. The cast knives offer superior edge retention and overall corrosion resistance. The slicer knives are cast in PMI`s foundry. The casting process sometimes produces shrinkage voids or gas bubbles in the knife blank. Surface discontinuities often do not appear until rough cutting or final machining, i.e., after several hours of value-added manufacturing. Knife blanks with these discontinuities were scrapped and sent back to the foundry for remelting. Tomore » scrap the knives at that point meant the cost for casting plus the value-added machining added up to a considerable amount. Weld repair allows the recovery of casting and machining expenses equal to a significant percentage of the total manufacturing cost of slicer knives. Repair costs include welding, grinding, shipping, surface finishing and material handling. Other good applications for this GMAW-P process include repair of jet engine components, rotating process industry equipment, and hardfacing of cutting tools and dies. In addition, dissimilar metals and any material that is heat treated to develop its properties such as precision investment castings are excellent applications. The low resultant distortion, elimination of postweld heat treatment and non-line-of-site welding capability solves thin wall, limited access and precision machined component repair challenges.« less

Review of Portable and Low-Cost Sensors for the Ambient Air Monitoring of Benzene and Other Volatile Organic Compounds

PubMed Central

Kok, Gertjan; Persijn, Stefan; Sauerwald, Tilman

2017-01-01

This article presents a literature review of sensors for the monitoring of benzene in ambient air and other volatile organic compounds. Combined with information provided by stakeholders, manufacturers and literature, the review considers commercially available sensors, including PID-based sensors, semiconductor (resistive gas sensors) and portable on-line measuring devices as for example sensor arrays. The bibliographic collection includes the following topics: sensor description, field of application at fixed sites, indoor and ambient air monitoring, range of concentration levels and limit of detection in air, model descriptions of the phenomena involved in the sensor detection process, gaseous interference selectivity of sensors in complex VOC matrix, validation data in lab experiments and under field conditions. PMID:28657595

Review of Portable and Low-Cost Sensors for the Ambient Air Monitoring of Benzene and Other Volatile Organic Compounds.

PubMed

Spinelle, Laurent; Gerboles, Michel; Kok, Gertjan; Persijn, Stefan; Sauerwald, Tilman

2017-06-28

This article presents a literature review of sensors for the monitoring of benzene in ambient air and other volatile organic compounds. Combined with information provided by stakeholders, manufacturers and literature, the review considers commercially available sensors, including PID-based sensors, semiconductor (resistive gas sensors) and portable on-line measuring devices as for example sensor arrays. The bibliographic collection includes the following topics: sensor description, field of application at fixed sites, indoor and ambient air monitoring, range of concentration levels and limit of detection in air, model descriptions of the phenomena involved in the sensor detection process, gaseous interference selectivity of sensors in complex VOC matrix, validation data in lab experiments and under field conditions.

A novel jet-based nano-hydroxyapatite patterning technique for osteoblast guidance

PubMed Central

Li, Xiang; Koller, Garrit; Huang, Jie; Di Silvio, Lucy; Renton, Tara; Esat, Minoo; Bonfield, William; Edirisinghe, Mohan

2010-01-01

Surface topography is well known to play a crucial role in influencing cellular responses to an implant material and is therefore important in bone tissue regeneration. A novel jet-based patterning technique, template-assisted electrohydrodynamic atomization spraying, was recently devised to control precisely the surface structure as well as its dimensions. In the present study, a detailed investigation of this patterning process was carried out. A range of nano-hydroxyapatite (nHA) line-shaped patterns <20 µm in width were successfully deposited on a commercially pure Ti surface by controlling the flow of an nHA suspension in an electric field. In vitro studies showed that the nHA patterns generated are capable of regulating the human osteoblast cell attachment and orientation. PMID:19493897

Analysis of Recreational Boating Impact on Navigation Lock Performance

DTIC Science & Technology

1989-12-01

seeing the large craft at night. Another comment, a common one at most locks, was the lack of knowledge of rules by many recreational boaters. Several...cause of time delays, and not recreational boats. However, one of the pilots indicated that water skiers were major hazards to commercial barges as...they cut across the path of commercial tows below the line of sight of the pilot. Recreational boaters and particularly those pulling skiers should be

A simple way to higher speed atomic force microscopy by retrofitting with a novel high-speed flexure-guided scanner

NASA Astrophysics Data System (ADS)

Ouma Alunda, Bernard; Lee, Yong Joong; Park, Soyeun

2018-06-01

A typical line-scan rate for a commercial atomic force microscope (AFM) is about 1 Hz. At such a rate, more than four minutes of scanning time is required to obtain an image of 256 × 256 pixels. Despite control electronics of most commercial AFMs permit faster scan rates, default piezoelectric X–Y scanners limit the overall speed of the system. This is a direct consequence of manufacturers choosing a large scan range over the maximum operating speed for a X–Y scanner. Although some AFM manufacturers offer reduced-scan area scanners as an option, the speed improvement is not significant because such scanners do not have large enough reduction in the scan range and are mainly targeted to reducing the overall cost of the AFM systems. In this article, we present a simple parallel-kinematic substitute scanner for a commercial atomic force microscope to afford a higher scanning speed with no other hardware or software upgrade to the original system. Although the scan area reduction is unavoidable, our modified commercial XE-70 AFM from Park Systems has achieved a line scan rate of over 50 Hz, more than 10 times faster than the original, unmodified system. Our flexure-guided X–Y scanner can be a simple drop-in replacement option for enhancing the speed of various aging atomic force microscopes.

Computer vision challenges and technologies for agile manufacturing

NASA Astrophysics Data System (ADS)

Molley, Perry A.

1996-02-01

Sandia National Laboratories, a Department of Energy laboratory, is responsible for maintaining the safety, security, reliability, and availability of the nuclear weapons stockpile for the United States. Because of the changing national and global political climates and inevitable budget cuts, Sandia is changing the methods and processes it has traditionally used in the product realization cycle for weapon components. Because of the increasing age of the nuclear stockpile, it is certain that the reliability of these weapons will degrade with time unless eventual action is taken to repair, requalify, or renew them. Furthermore, due to the downsizing of the DOE weapons production sites and loss of technical personnel, the new product realization process is being focused on developing and deploying advanced automation technologies in order to maintain the capability for producing new components. The goal of Sandia's technology development program is to create a product realization environment that is cost effective, has improved quality and reduced cycle time for small lot sizes. The new environment will rely less on the expertise of humans and more on intelligent systems and automation to perform the production processes. The systems will be robust in order to provide maximum flexibility and responsiveness for rapidly changing component or product mixes. An integrated enterprise will allow ready access to and use of information for effective and efficient product and process design. Concurrent engineering methods will allow a speedup of the product realization cycle, reduce costs, and dramatically lessen the dependency on creating and testing physical prototypes. Virtual manufacturing will allow production processes to be designed, integrated, and programed off-line before a piece of hardware ever moves. The overriding goal is to be able to build a large variety of new weapons parts on short notice. Many of these technologies that are being developed are also applicable to commercial production processes and applications. Computer vision will play a critical role in the new agile production environment for automation of processes such as inspection, assembly, welding, material dispensing and other process control tasks. Although there are many academic and commercial solutions that have been developed, none have had widespread adoption considering the huge potential number of applications that could benefit from this technology. The reason for this slow adoption is that the advantages of computer vision for automation can be a double-edged sword. The benefits can be lost if the vision system requires an inordinate amount of time for reprogramming by a skilled operator to account for different parts, changes in lighting conditions, background clutter, changes in optics, etc. Commercially available solutions typically require an operator to manually program the vision system with features used for the recognition. In a recent survey, we asked a number of commercial manufacturers and machine vision companies the question, 'What prevents machine vision systems from being more useful in factories?' The number one (and unanimous) response was that vision systems require too much skill to set up and program to be cost effective.

Airborne Gravity Measurements using a Helicopter with Special Emphases on Delineating Local Gravity Anomalies Mainly for Detecting Active Seismic Faults (Invited)

NASA Astrophysics Data System (ADS)

Segawa, J.

2010-12-01

The first aerial gravity measurement in Japan started in 1998 using a Japanese airborne gravimeter ‘ Segawa-TKeiki airborne gravimeter Model FGA-1’. We lay emphasis on the measurement of detailed gravity structures at the land-to-sea border areas and mountainous areas. This is the reason why we use a helicopter and make surveys at low altitude and low speed. We have so far made measurement at twelve sites and the total flight amounts to 20,000km. The accuracy of measurement is 1.5 mgal and half-wavelength resolution is 1.5 km. The Japanese type gravimeter consists of a servo-accelerometer type gravity sensor, a horizontal platform controlled by an optical fiber gyro, GPS positioning system, and a data processing system. Helicopter movement has to be precisely monitored three-dimensionally to calculate the vehicle’s acceleration noises. The necessary accuracy of positioning of the vehicle must be better than 10 cm in positioning error. Our helicopter gravity measurement has a special target in Japan to investigate active seismic faults located across land-to-sea borderlines. In Japan, it is generally thought that gravity over most of the country has already been measured by the governmental surveys, leaving the land-sea border lines and mountainous zones unsurveyed as difficult-to-access areas. In addition the use of airplane or helicopter in Japan appeared disadvantageous because of the narrowness of the Japanese Islands. Under such situations the author thought there still remained a particular as well as unique need for aerial gravity measurement in Japan, i.e. the need for detailed and seamless knowledge of gravity structures across land-to-sea border lines to elucidate complicated crustal structures of the Japanese Islands as well as distribution of active seismic faults for disaster prevention. The results of gravity measurements we have conducted so far include those of 12 sites. In the following the brief logs of our measurements are listed. 1)April 2000. Saitama-Tsukuba-Kashima-Nada. Flight Length 1,300km. Discovery of inconsistency between land and marine gravity nearby. 2)July 2000. Suruga Bay. Flight Length 1,500km. Gravity was contoured in the Suruga Bay. 3)November 2000. Enshu-Nada Sea. Flight Length 1,700km. First measurement of land-sea border line of the Tokai area. 4)October 2001. Enshu-Nada Sea. Flight Length 1,500km. Revisit to Enshu Nada sea. 5)December 2001. Kohdu-shima and Miyake Jima. Flight Length 1,800km. Measurement of gravity over the basin between Miyake and Kohdu. 6)June 2002. Enshu-Nada Sea. Flight Length 2,200km. Measurement of gravity across the Tenryu-River active fault. 7)November 2004. Iyonada and Sata Peninsula. (Commercial works). 8)March 2006. Middle Noto Peninsula. (Commercial works). 9)November 2006. Wakasa Bay. (Commercial works). 10)October 2008. North Noto Peninsula. (Commercial works). 11)November 2008. West Seto Inland Sea. (Commercial works). 12)November 2009. Shimokita Peninsula and Seto Inland Sea.

Development of an Eye-Safe Micro-Pulse Differential Absorption Lidar (DIAL) for Carbon Dioxide Profilings

NASA Astrophysics Data System (ADS)

Johnson, W.; Repasky, K. S.; Nehrir, A. R.; Carlsten, J.

2011-12-01

A differential absorption lidar (DIAL) for monitoring carbon dioxide (CO2) is under development at Montana State University using commercially available parts. Two distributed feedback (DFB) lasers, one at the on-line wavelength and one at the off-line wavelength are used to injection seed a fiber amplifier. The DIAL operates in the 1.57 micron carbon dioxide absorption band at an on-line wavelength of 1.5714060 microns. The laser transmitter produces 40 μJ pulses with a pulse duration of 1 μs and a pulse repetition frequency of 20 kHz. The scattered light from the laser transmitter is collected using a 28 cm diameter Schmidt-Cassegrain telescope. The light collected by the telescope is collimated and then filtered using a 0.8 nm FWHM narrowband interference filter. After the optical filter, the light is coupled into a multimode optical fiber with a 1000 μm core diameter. The output from the optical fiber is coupled into a photomultiplier tube (PMT) used to monitor the return signal. The analog output from the PMT is next incident on a discriminator producing TTL logic pulses for photon counting. The output from the PMT and discriminator is monitored using a multichannel scalar card allowing the counting of the TTL pulses as a function of range. Data from the DIAL instrument is collected in the following manner. The fiber amplifier is injection seeded first with the on-line DFB laser. The return signal as a function of range is integrated using the multichannel scalar for a user defined time, typically set at 6 s. The off-line DFB laser is then used to injection seed the fiber amplifier and the process is repeated. This process is repeated for a user defined period. The CO2 concentration as a function of range is calculated using the on-line and off-line return signals with the DIAL equation. A comparison of the CO2 concentration measured using the DIAL instrument at 1.5 km and a Li-Cor LI-820 in situ sensor located at 1.5 km from the DIAL over a 2.5 hour period indicate that the CO2 DIAL has an accuracy of ±20 parts per million (PPM).

Isolation of Canine parvovirus with a view to identify the prevalent serotype on the basis of partial sequence analysis.

PubMed

Kaur, Gurpreet; Chandra, Mudit; Dwivedi, P N; Sharma, N S

2015-01-01

The aim of this study was to isolate Canine parvovirus (CPV) from suspected dogs on madin darby canine kidney (MDCK) cell line and its confirmation by polymerase chain reaction (PCR) and nested PCR (NPCR). Further, VP2 gene of the CPV isolates was amplified and sequenced to determine prevailing antigenic type. A total of 60 rectal swabs were collected from dogs showing signs of gastroenteritis, processed and subjected to isolation in MDCK cell line. The samples showing cytopathic effects (CPE) were confirmed by PCR and NPCR. These samples were subjected to PCR for amplification of VP2 gene of CPV, sequenced and analyzed to study the prevailing antigenic types of CPV. Out of the 60 samples subjected to isolation in MDCK cell line five samples showed CPE in the form of rounding of cells, clumping of cells and finally detachment of the cells. When these samples and the two commercially available vaccines were subjected to PCR for amplification of VP2 gene, a 1710 bp product was amplified. The sequence analysis revealed that the vaccines belonged to the CPV-2 type and the samples were of CPV-2b type. It can be concluded from the present study that out of a total of 60 samples 5 samples exhibited CPE as observed in MDCK cell line. Sequence analysis of the VP2 gene among the samples and vaccine strains revealed that samples belonged to CPV-2b type and vaccines belonging to CPV-2.

High-Throughput Analysis of T-DNA Location and Structure Using Sequence Capture.

PubMed

Inagaki, Soichi; Henry, Isabelle M; Lieberman, Meric C; Comai, Luca

2015-01-01

Agrobacterium-mediated transformation of plants with T-DNA is used both to introduce transgenes and for mutagenesis. Conventional approaches used to identify the genomic location and the structure of the inserted T-DNA are laborious and high-throughput methods using next-generation sequencing are being developed to address these problems. Here, we present a cost-effective approach that uses sequence capture targeted to the T-DNA borders to select genomic DNA fragments containing T-DNA-genome junctions, followed by Illumina sequencing to determine the location and junction structure of T-DNA insertions. Multiple probes can be mixed so that transgenic lines transformed with different T-DNA types can be processed simultaneously, using a simple, index-based pooling approach. We also developed a simple bioinformatic tool to find sequence read pairs that span the junction between the genome and T-DNA or any foreign DNA. We analyzed 29 transgenic lines of Arabidopsis thaliana, each containing inserts from 4 different T-DNA vectors. We determined the location of T-DNA insertions in 22 lines, 4 of which carried multiple insertion sites. Additionally, our analysis uncovered a high frequency of unconventional and complex T-DNA insertions, highlighting the needs for high-throughput methods for T-DNA localization and structural characterization. Transgene insertion events have to be fully characterized prior to use as commercial products. Our method greatly facilitates the first step of this characterization of transgenic plants by providing an efficient screen for the selection of promising lines.

Real-Time Telemetry System for Monitoring Motion of Ships Based on Inertial Sensors.

PubMed

Núñez, José M; Araújo, Marta G; García-Tuñón, I

2017-04-25

A telemetry system for real-time monitoring of the motions, position, speed and course of a ship at sea is presented in this work. The system, conceived as a subsystem of a radar cross-section measurement unit, could also be used in other applications as ships dynamics characterization, on-board cranes, antenna stabilizers, etc. This system was designed to be stand-alone, reliable, easy to deploy, low-cost and free of requirements related to stabilization procedures. In order to achieve such a unique combination of functionalities, we have developed a telemetry system based on redundant inertial and magnetic sensors and GPS (Global Positioning System) measurements. It provides a proper data storage and also has real-time radio data transmission capabilities to an on-shore station. The output of the system can be used either for on-line or off-line processing. Additionally, the system uses dual technologies and COTS (Commercial Off-The-Shelf) components. Motion-positioning measurements and radio data link tests were successfully carried out in several ships of the Spanish Navy, proving the compliance with the design targets and validating our telemetry system.

Compact FPGA-based beamformer using oversampled 1-bit A/D converters.

PubMed

Tomov, Borislav Gueorguiev; Jensen, Jørgen Arendt

2005-05-01

A compact medical ultrasound beamformer architecture that uses oversampled 1-bit analog-to-digital (A/D) converters is presented. Sparse sample processing is used, as the echo signal for the image lines is reconstructed in 512 equidistant focal points along the line through its in-phase and quadrature components. That information is sufficient for presenting a B-mode image and creating a color flow map. The high sampling rate provides the necessary delay resolution for the focusing. The low channel data width (1-bit) makes it possible to construct a compact beamformer logic. The signal reconstruction is done using finite impulse reponse (FIR) filters, applied on selected bit sequences of the delta-sigma modulator output stream. The approach allows for a multichannel beamformer to fit in a single field programmable gate array (FPGA) device. A 32-channel beamformer is estimated to occupy 50% of the available logic resources in a commercially available mid-range FPGA, and to be able to operate at 129 MHz. Simulation of the architecture at 140 MHz provides images with a dynamic range approaching 60 dB for an excitation frequency of 3 MHz.

Transformation of plum plants with a cytosolic ascorbate peroxidase transgene leads to enhanced water stress tolerance

PubMed Central

Diaz-Vivancos, Pedro; Faize, Lydia; Nicolás, Emilio; Clemente-Moreno, Maria José; Bru-Martinez, Roque; Burgos, Lorenzo; Hernández, José Antonio

2016-01-01

Background and Aims Water deficit is the most serious environmental factor limiting agricultural production. In this work, the tolerance to water stress (WS) of transgenic plum lines harbouring transgenes encoding cytosolic antioxidant enzymes was studied, with the aim of achieving the durable resistance of commercial plum trees. Methods The acclimatization process was successful for two transgenic lines: line C3-1, co-expressing superoxide dismutase (two copies) and ascorbate peroxidase (one copy) transgenes simultaneously; and line J8-1, harbouring four copies of the cytosolic ascorbate peroxidase gene (cytapx). Plant water relations, chlorophyll fluorescence and the levels of antioxidant enzymes were analysed in both lines submitted to moderate (7 d) and severe (15 d) WS conditions. Additionally, in line J8-1, showing the best response in terms of stress tolerance, a proteomic analysis and determination of the relative gene expression of two stress-responsive genes were carried out. Key Results Line J8-1 exhibited an enhanced stress tolerance that correlated with better photosynthetic performance and a tighter control of water-use efficiency. Furthermore, this WS tolerance also correlated with a higher enzymatic antioxidant capacity than wild-type (WT) and line C3-1 plum plants. On the other hand, line C3-1 displayed an intermediate phenotype between WT plants and line J8-1 in terms of WS tolerance. Under severe WS, the tolerance displayed by J8-1 plants could be due to an enhanced capacity to cope with drought-induced oxidative stress. Moreover, proteomic analysis revealed differences between WT and J8-1 plants, mainly in terms of the abundance of proteins related to carbohydrate metabolism, photosynthesis, antioxidant defences and protein fate. Conclusions The transformation of plum plants with cytapx has a profound effect at the physiological, biochemical, proteomic and genetic levels, enhancing WS tolerance. Although further experiments under field conditions will be required, it is proposed that J8-1 plants would be an interesting Prunus rootstock for coping with climate change. PMID:27059431

Transformation of plum plants with a cytosolic ascorbate peroxidase transgene leads to enhanced water stress tolerance.

PubMed

Diaz-Vivancos, Pedro; Faize, Lydia; Nicolás, Emilio; Clemente-Moreno, Maria José; Bru-Martinez, Roque; Burgos, Lorenzo; Hernández, José Antonio

2016-06-01

Water deficit is the most serious environmental factor limiting agricultural production. In this work, the tolerance to water stress (WS) of transgenic plum lines harbouring transgenes encoding cytosolic antioxidant enzymes was studied, with the aim of achieving the durable resistance of commercial plum trees. The acclimatization process was successful for two transgenic lines: line C3-1, co-expressing superoxide dismutase (two copies) and ascorbate peroxidase (one copy) transgenes simultaneously; and line J8-1, harbouring four copies of the cytosolic ascorbate peroxidase gene (cytapx). Plant water relations, chlorophyll fluorescence and the levels of antioxidant enzymes were analysed in both lines submitted to moderate (7 d) and severe (15 d) WS conditions. Additionally, in line J8-1, showing the best response in terms of stress tolerance, a proteomic analysis and determination of the relative gene expression of two stress-responsive genes were carried out. Line J8-1 exhibited an enhanced stress tolerance that correlated with better photosynthetic performance and a tighter control of water-use efficiency. Furthermore, this WS tolerance also correlated with a higher enzymatic antioxidant capacity than wild-type (WT) and line C3-1 plum plants. On the other hand, line C3-1 displayed an intermediate phenotype between WT plants and line J8-1 in terms of WS tolerance. Under severe WS, the tolerance displayed by J8-1 plants could be due to an enhanced capacity to cope with drought-induced oxidative stress. Moreover, proteomic analysis revealed differences between WT and J8-1 plants, mainly in terms of the abundance of proteins related to carbohydrate metabolism, photosynthesis, antioxidant defences and protein fate. The transformation of plum plants with cytapx has a profound effect at the physiological, biochemical, proteomic and genetic levels, enhancing WS tolerance. Although further experiments under field conditions will be required, it is proposed that J8-1 plants would be an interesting Prunus rootstock for coping with climate change. © The Author 2016. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Advanced Photonic Processes for Photovoltaic and Energy Storage Systems.

PubMed

Sygletou, Maria; Petridis, Constantinos; Kymakis, Emmanuel; Stratakis, Emmanuel

2017-10-01

Solar-energy harvesting through photovoltaic (PV) conversion is the most promising technology for long-term renewable energy production. At the same time, significant progress has been made in the development of energy-storage (ES) systems, which are essential components within the cycle of energy generation, transmission, and usage. Toward commercial applications, the enhancement of the performance and competitiveness of PV and ES systems requires the adoption of precise, but simple and low-cost manufacturing solutions, compatible with large-scale and high-throughput production lines. Photonic processes enable cost-efficient, noncontact, highly precise, and selective engineering of materials via photothermal, photochemical, or photophysical routes. Laser-based processes, in particular, provide access to a plethora of processing parameters that can be tuned with a remarkably high degree of precision to enable innovative processing routes that cannot be attained by conventional approaches. The focus here is on the application of advanced light-driven approaches for the fabrication, as well as the synthesis, of materials and components relevant to PV and ES systems. Besides presenting recent advances on recent achievements, the existing limitations are outlined and future possibilities and emerging prospects discussed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

High-resolution compact spectrometer based on a custom-printed varied-line-spacing concave blazed grating.

PubMed

Chen, Jianwei; Chen, Wang; Zhang, Guodong; Lin, Hui; Chen, Shih-Chi

2017-05-29

We present the modeling, design and characterization of a compact spectrometer, achieving a resolution better than 1.5 nm throughout the visible spectrum (360-825 nm). The key component in the spectrometer is a custom-printed varied-line-space (VLS) concave blazed grating, where the groove density linearly decreases from the center of the grating (530 g/mm) at a rate of 0.58 nm/mm to the edge (528 g/mm). Parametric models have been established to deterministically link the system performance with the VLS grating design parameters, e.g., groove density, line-space varying rate, and to minimize the system footprint. Simulations have been performed in ZEMAX to confirm the results, indicating a 15% enhancement in system resolution versus common constant line-space (CLS) gratings. Next, the VLS concave blazed grating is fabricated via our vacuum nanoimprinting system, where a polydimethylsiloxane (PDMS) stamp is non-uniformly expanded to form the varied-line-spacing pattern from a planar commercial grating master (600 g/mm) for precision imprinting. The concave blazed grating is measured to have an absolute diffraction efficiency of 43%, higher than typical holographic gratings (~30%) used in the commercial compact spectrometers. The completed compact spectrometer contains only one optical component, i.e., the VLS concave grating, as well as an entrance slit and linear photodetector array, achieving a footprint of 11 × 11 × 3 cm 3 , which makes it the most compact and resolving (1.46 nm) spectrometer of its kind.

Simple, Scalable, Script-Based Science Processor (S4P)

NASA Technical Reports Server (NTRS)

Lynnes, Christopher; Vollmer, Bruce; Berrick, Stephen; Mack, Robert; Pham, Long; Zhou, Bryan; Wharton, Stephen W. (Technical Monitor)

2001-01-01

The development and deployment of data processing systems to process Earth Observing System (EOS) data has proven to be costly and prone to technical and schedule risk. Integration of science algorithms into a robust operational system has been difficult. The core processing system, based on commercial tools, has demonstrated limitations at the rates needed to produce the several terabytes per day for EOS, primarily due to job management overhead. This has motivated an evolution in the EOS Data Information System toward a more distributed one incorporating Science Investigator-led Processing Systems (SIPS). As part of this evolution, the Goddard Earth Sciences Distributed Active Archive Center (GES DAAC) has developed a simplified processing system to accommodate the increased load expected with the advent of reprocessing and launch of a second satellite. This system, the Simple, Scalable, Script-based Science Processor (S42) may also serve as a resource for future SIPS. The current EOSDIS Core System was designed to be general, resulting in a large, complex mix of commercial and custom software. In contrast, many simpler systems, such as the EROS Data Center AVHRR IKM system, rely on a simple directory structure to drive processing, with directories representing different stages of production. The system passes input data to a directory, and the output data is placed in a "downstream" directory. The GES DAAC's Simple Scalable Script-based Science Processing System is based on the latter concept, but with modifications to allow varied science algorithms and improve portability. It uses a factory assembly-line paradigm: when work orders arrive at a station, an executable is run, and output work orders are sent to downstream stations. The stations are implemented as UNIX directories, while work orders are simple ASCII files. The core S4P infrastructure consists of a Perl program called stationmaster, which detects newly arrived work orders and forks a job to run the appropriate executable (registered in a configuration file for that station). Although S4P is written in Perl, the executables associated with a station can be any program that can be run from the command line, i.e., non-interactively. An S4P instance is typically monitored using a simple Graphical User Interface. However, the reliance of S4P on UNIX files and directories also allows visibility into the state of stations and jobs using standard operating system commands, permitting remote monitor/control over low-bandwidth connections. S4P is being used as the foundation for several small- to medium-size systems for data mining, on-demand subsetting, processing of direct broadcast Moderate Resolution Imaging Spectroradiometer (MODIS) data, and Quick-Response MODIS processing. It has also been used to implement a large-scale system to process MODIS Level 1 and Level 2 Standard Products, which will ultimately process close to 2 TB/day.

PC based PLCs and ethernet based fieldbus: the new standard platform for future VLT instrument control

NASA Astrophysics Data System (ADS)

Kiekebusch, Mario J.; Lucuix, Christian; Erm, Toomas M.; Chiozzi, Gianluca; Zamparelli, Michele; Kern, Lothar; Brast, Roland; Pirani, Werther; Reiss, Roland; Popovic, Dan; Knudstrup, Jens; Duchateau, Michel; Sandrock, Stefan; Di Lieto, Nicola

2014-07-01

ESO is currently in the final phase of the standardization process for PC-based Programmable Logical Controllers (PLCs) as the new platform for the development of control systems for future VLT/VLTI instruments. The standard solution used until now consists of a Local Control Unit (LCU), a VME-based system having a CPU and commercial and proprietary boards. This system includes several layers of software and many thousands of lines of code developed and maintained in house. LCUs have been used for several years as the interface to control instrument functions but now are being replaced by commercial off-the-shelf (COTS) systems based on BECKHOFF Embedded PCs and the EtherCAT fieldbus. ESO is working on the completion of the software framework that enables a seamless integration into the VLT control system in order to be ready to support upcoming instruments like ESPRESSO and ERIS, that will be the first fully VLT compliant instruments using the new standard. The technology evaluation and standardization process has been a long and combined effort of various engineering disciplines like electronics, control and software, working together to define a solution that meets the requirements and minimizes the impact on the observatory operations and maintenance. This paper presents the challenges of the standardization process and the steps involved in such a change. It provides a technical overview of how industrial standards like EtherCAT, OPC-UA, PLCOpen MC and TwinCAT can be used to replace LCU features in various areas like software engineering and programming languages, motion control, time synchronization and astronomical tracking.

Flexible Environmental Modeling with Python and Open - GIS

NASA Astrophysics Data System (ADS)

Pryet, Alexandre; Atteia, Olivier; Delottier, Hugo; Cousquer, Yohann

2015-04-01

Numerical modeling now represents a prominent task of environmental studies. During the last decades, numerous commercial programs have been made available to environmental modelers. These software applications offer user-friendly graphical user interfaces that allow an efficient management of many case studies. However, they suffer from a lack of flexibility and closed-source policies impede source code reviewing and enhancement for original studies. Advanced modeling studies require flexible tools capable of managing thousands of model runs for parameter optimization, uncertainty and sensitivity analysis. In addition, there is a growing need for the coupling of various numerical models associating, for instance, groundwater flow modeling to multi-species geochemical reactions. Researchers have produced hundreds of open-source powerful command line programs. However, there is a need for a flexible graphical user interface allowing an efficient processing of geospatial data that comes along any environmental study. Here, we present the advantages of using the free and open-source Qgis platform and the Python scripting language for conducting environmental modeling studies. The interactive graphical user interface is first used for the visualization and pre-processing of input geospatial datasets. Python scripting language is then employed for further input data processing, call to one or several models, and post-processing of model outputs. Model results are eventually sent back to the GIS program, processed and visualized. This approach combines the advantages of interactive graphical interfaces and the flexibility of Python scripting language for data processing and model calls. The numerous python modules available facilitate geospatial data processing and numerical analysis of model outputs. Once input data has been prepared with the graphical user interface, models may be run thousands of times from the command line with sequential or parallel calls. We illustrate this approach with several case studies in groundwater hydrology and geochemistry and provide links to several python libraries that facilitate pre- and post-processing operations.

Microbiology of beef carcasses before and after slaughterline automation.

PubMed Central

Whelehan, O. P.; Hudson, W. R.; Roberts, T. A.

1986-01-01

The bacterial status of beef carcasses at a commercial abattoir was monitored before and after slaughterline automation. Bacterial counts did not differ significantly overall (P greater than 0.05) between the original manual line and the automated line for either morning or afternoon slaughter. On the manual line counts in the morning were lower than those from carcasses slaughtered in the afternoon, but on the automated line there was no difference between morning and afternoon counts. Due to highly significant line X sample site interaction for both morning and afternoon counts, overall differences among sample sites were not found by analysis of variance. However, principal components analysis revealed a significant shift in bacterial contamination among some sites due to slaughterline changes. The incidence of Enterobacteriaceae increased marginally following automation. PMID:3701039

Counting neutrons with a commercial S-CMOS camera

NASA Astrophysics Data System (ADS)

Patrick, Van Esch; Paolo, Mutti; Emilio, Ruiz-Martinez; Estefania, Abad Garcia; Marita, Mosconi; Jon, Ortega

2018-01-01

It is possible to detect individual flashes from thermal neutron impacts in a ZnS scintillator using a CMOS camera looking at the scintillator screen, and off line image processing. Some preliminary results indicated that the efficiency of recognition could be improved by optimizing the light collection and the image processing. We will report on this ongoing work which is a result from the collaboration between ESS Bilbao and the ILL. The main progress to be reported is situated on the level of the on-line treatment of the imaging data. If this technology is to work on a genuine scientific instrument, it is necessary that all the processing happens on line, to avoid the accumulation of large amounts of image data to be analyzed off line. An FPGA-based real-time full-deca mode VME-compatible CameraLink board has been developed at the SCI of the ILL, which is able to manage the data flow from the camera and convert it in a reasonable "neutron impact" data flow like from a usual neutron counting detector. The main challenge of the endeavor is the optical light collection from the scintillator. While the light yield of a ZnS scintillator is a priori rather important, the amount of light collected with a photographic objective is small. Different scintillators and different light collection techniques have been experimented with and results will be shown for different setups improving upon the light recuperation on the camera sensor. Improvements on the algorithm side will also be presented. The algorithms have to be at the same time efficient in their recognition of neutron signals, in their rejection of noise signals (internal and external to the camera) but also have to be simple enough to be easily implemented in the FPGA. The path from the idea of detecting individual neutron impacts with a CMOS camera to a practical working instrument detector is challenging, and in this paper we will give an overview of the part of the road that has already been walked.

An after-market, five-port vertical beam line extension for the PETtrace

NASA Astrophysics Data System (ADS)

Barnhart, T. E.; Engle, J. W.; Severin, G. W.; Valdovinos, H. F.; Gagnon, K.; Nickles, R. J.

2012-12-01

Most commercial cyclotrons intended for medical isotope production provide a limited number of beam ports crowded into a minimal vault space. Taking advantage of our new lab construction, we planned and installed a beam-line on port ♯2 of our GEMS PETtrace to bring beam to an additional 5 target positions. These are oriented in the vertical plane, with the downward directed beam well suited for molten target substrates.

Safer Pleasure Boats

NASA Technical Reports Server (NTRS)

1976-01-01

'Flamarest' coating developed by Avco Corporation for NASA to protect fuel lines and tanks is sprayed on the interior of polyester boat hull in commercial application. About 30 mils of the coating prevented structural damage to hull during test in which a 13 minute interior gasoline fire was started. An unprotected hull would begin to burn in 30 seconds. Same material applied as tape to wrap fuel lines effectively insulates hose when charred while also reducing spread of flame.

Community tools for cartographic and photogrammetric processing of Mars Express HRSC images

USGS Publications Warehouse

Kirk, Randolph L.; Howington-Kraus, Elpitha; Edmundson, Kenneth L.; Redding, Bonnie L.; Galuszka, Donna M.; Hare, Trent M.; Gwinner, K.; Wu, B.; Di, K.; Oberst, J.; Karachevtseva, I.

2017-01-01

The High Resolution Stereo Camera (HRSC) on the Mars Express orbiter (Neukum et al. 2004) is a multi-line pushbroom scanner that can obtain stereo and color coverage of targets in a single overpass, with pixel scales as small as 10 m at periapsis. Since commencing operations in 2004 it has imaged ~ 77 % of Mars at 20 m/pixel or better. The instrument team uses the Video Image Communication And Retrieval (VICAR) software to produce and archive a range of data products from uncalibrated and radiometrically calibrated images to controlled digital topographic models (DTMs) and orthoimages and regional mosaics of DTM and orthophoto data (Gwinner et al. 2009; 2010b; 2016). Alternatives to this highly effective standard processing pipeline are nevertheless of interest to researchers who do not have access to the full VICAR suite and may wish to make topographic products or perform other (e. g., spectrophotometric) analyses prior to the release of the highest level products. We have therefore developed software to ingest HRSC images and model their geometry in the USGS Integrated Software for Imagers and Spectrometers (ISIS3), which can be used for data preparation, geodetic control, and analysis, and the commercial photogrammetric software SOCET SET (® BAE Systems; Miller and Walker 1993; 1995) which can be used for independent production of DTMs and orthoimages. The initial implementation of this capability utilized the then-current ISIS2 system and the generic pushbroom sensor model of SOCET SET, and was described in the DTM comparison of independent photogrammetric processing by different elements of the HRSC team (Heipke et al. 2007). A major drawback of this prototype was that neither software system then allowed for pushbroom images in which the exposure time changes from line to line. Except at periapsis, HRSC makes such timing changes every few hundred lines to accommodate changes of altitude and velocity in its elliptical orbit. As a result, it was necessary to split observations into blocks of constant exposure time, greatly increasing the effort needed to control the images and collect DTMs. Here, we describe a substantially improved HRSC processing capability that incorporates sensor models with varying line timing in the current ISIS3 system (Sides 2017) and SOCET SET. This enormously reduces the work effort for processing most images and eliminates the artifacts that arose from segmenting them. In addition, the software takes advantage of the continuously evolving capabilities of ISIS3 and the improved image matching module NGATE (Next Generation Automatic Terrain Extraction, incorporating area and feature based algorithms, multi-image and multi-direction matching) of SOCET SET, thus greatly reducing the need for manual editing of DTM errors. We have also developed a procedure for geodetically controlling the images to Mars Orbiter Laser Altimeter (MOLA) data by registering a preliminary stereo topographic model to MOLA by using the point cloud alignment (pc_align) function of the NASA Ames Stereo Pipeline (ASP; Moratto et al. 2010). This effectively converts inter-image tiepoints into ground control points in the MOLA coordinate system. The result is improved absolute accuracy and a significant reduction in work effort relative to manual measurement of ground control. The ISIS and ASP software used are freely available; SOCET SET, is a commercial product. By the end of 2017 we expect to have ported our SOCET SET HRSC sensor model to the Community Sensor Model (CSM; Community Sensor Model Working Group 2010; Hare and Kirk 2017) standard utilized by the successor photogrammetric system SOCET GXP that is currently offered by BAE. In early 2018, we are also working with BAE to release the CSM source code under a BSD or MIT open source license. 

Commercial space opportunities - Advanced concepts and technology overview

NASA Technical Reports Server (NTRS)

Reck, Gregory M.

1993-01-01

The paper discusses the status of current and future commercial space opportunities. The goal is to pioneer innovative, customer-focused space concepts and technologies, leveraged through industrial, academic, and government alliance, to ensure U.S. commercial competitiveness and preeminence in space. The strategy is to develop technologies which enable new products and processes, deploy existing technology into commercial and military products and processes, and integrate military and commercial research and production activities. Technology development areas include information infrastructure, electronics design and manufacture, health care technology, environment technology, and aeronautical technologies.

Tobacco, Commercial Speech, and Libertarian Values: The End of the Line for Restrictions on Advertising?

PubMed Central

Bayer, Ronald

2002-01-01

In June of 2001, the Supreme Court overturned a set of antitobacco measures adopted by the state of Massachusetts designed to protect young people from advertising. Once again, the court expressed its hostility toward measures designed to restrict commercial speech in the name of the social good. In so doing, the court underscored the enduring tension between the libertarian and social welfare dimensions of contemporary democracy and placed into relief the divisions within the American liberal tradition. PMID:11867307

Genetic manipulation of gamma-linolenic acid (GLA) synthesis in a commercial variety of evening primrose (Oenothera sp.).

PubMed

de Gyves, Emilio Mendoza; Sparks, Caroline A; Sayanova, Olga; Lazzeri, Paul; Napier, Johnathan A; Jones, Huw D

2004-07-01

A robust Agrobacterium-mediated transformation procedure was developed for Rigel, a commercial cultivar of evening primrose, and used to deliver a cDNA encoding a Delta(6)-desaturase from borage under the control of a cauliflower mosaic virus (CaMV) 35S promoter. Analysis of the transformed plants demonstrated an altered profile of polyunsaturated fatty acids, with an increase in gamma-linolenic acid and octadecatetraenoic acid in leaf tissues when compared with control lines.

Wealth redistribution in our small world

NASA Astrophysics Data System (ADS)

Iglesias, J. R.; Gonçalves, S.; Pianegonda, S.; Vega, J. L.; Abramson, G.

2003-09-01

We present a simplified model for the exploitation of resources by interacting agents, in an economy with small-world properties. It is shown that Gaussian distributions of wealth, with some cutoff at a poverty line are present for all values of the parameters, while the frequency of maxima and minima strongly depends on the connectivity and the disorder of the lattice. Finally, we compare a system where the commercial links are frozen with an economy where agents can choose their commercial partners at each time step.

Tobacco, commercial speech, and libertarian values: the end of the line for restrictions on advertising?

PubMed

Bayer, Ronald

2002-03-01

In June of 2001, the Supreme Court overturned a set of antitobacco measures adopted by the state of Massachusetts designed to protect young people from advertising. Once again, the court expressed its hostility toward measures designed to restrict commercial speech in the name of the social good. In so doing, the court underscored the enduring tension between the libertarian and social welfare dimensions of contemporary democracy and placed into relief the divisions within the American liberal tradition.

Evaluation of the Effectiveness of Five Odor Reducing Agents for Sewer System Odors Using an On-Line Total Reduced Sulfur Analyzer

PubMed Central

Choi, Il; Lee, Hyunjoo; Shin, Joungdu; Kim, Hyunook

2012-01-01

Sewer odors have been a concern to citizens of the Metropolitan Seoul region, which has installed combined sewer systems (CSSs) in 86% of its area. Although a variety of odorants are released from sewers, volatile sulfur compounds (VSCs) have been recognized as major ones. A number of technologies have been proposed to monitor or control odors from sewers. One of the most popular strategies adopted for the control of sewage odor is by applying a commercial odor-reducing agent into the sewer. In this study, the effectiveness of five different commercial odor-reducing agents (i.e., an odor masking agent, an alkaline solution, two microbial agents, and a chemical oxidant) was evaluated by continuously monitoring VSCs released from the sewer with an on-line total reduced sulfur (TRS) analyzer before and after each agent was sprayed into CSSs at five different locations of the city. In short, when the effectiveness of odor treatment was tested in the sewer system using five commercial odor reducing treatments, only the chemical oxidant was good enough to reduce the odor in terms of TRS levels measured before and after the application (p < 0.01). PMID:23223148

HIV drug resistance testing among patients failing second line antiretroviral therapy. Comparison of in-house and commercial sequencing.

PubMed

Chimukangara, Benjamin; Varyani, Bhavini; Shamu, Tinei; Mutsvangwa, Junior; Manasa, Justen; White, Elizabeth; Chimbetete, Cleophas; Luethy, Ruedi; Katzenstein, David

2017-05-01

HIV genotyping is often unavailable in low and middle-income countries due to infrastructure requirements and cost. We compared genotype resistance testing in patients with virologic failure, by amplification of HIV pol gene, followed by "in-house" sequencing and commercial sequencing. Remnant plasma samples from adults and children failing second-line ART were amplified and sequenced using in-house and commercial di-deoxysequencing, and analyzed in Harare, Zimbabwe and at Stanford, U.S.A, respectively. HIV drug resistance mutations were determined using the Stanford HIV drug resistance database. Twenty-six of 28 samples were amplified and 25 were successfully genotyped. Comparison of average percent nucleotide and amino acid identities between 23 pairs sequenced in both laboratories were 99.51 (±0.56) and 99.11 (±0.95), respectively. All pairs clustered together in phylogenetic analysis. Sequencing analysis identified 6/23 pairs with mutation discordances resulting in differences in phenotype, but these did not impact future regimens. The results demonstrate our ability to produce good quality drug resistance data in-house. Despite discordant mutations in some sequence pairs, the phenotypic predictions were not clinically significant. Copyright © 2016 Elsevier B.V. All rights reserved.

Influence of processing factors on the physical metallurgy of LENS deposited 316L stainless steel.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Nancy Y. C.; Yee, Joshua Keng; Zheng, Baolong

2015-12-01

Directed energy deposition (DED) is a type of additive manufacturing (AM) process; Laser Engineered Net Shaping (LENS) is a commercial DED process. We are developing LENS technology for printing 316L stainless steel components for structural applications. It is widely known that material properties of AM components are process dependent, attributed to different molten metal incorporation and thermal transport mechanisms. This investigation focuses on process-structure-property relationships for LENS deposits for enabling the process development and optimization to control material property. We observed interactions among powder melting, directional molten metal flow, and the molten metal solidification. The resultant LENS induced microstructure foundmore » to be dictated by the process-related characteristics, i.e., interpass boundaries from multi-layer deposition, molten metal flow lines, and solidification dendrite cells. Each characteristic bears the signature of the unique localized thermal history during deposition. Correlation observed between localized thermal transport, resultant microstructure, and its subsequent impact on the mechanical behavior of the current 316L is discussed. We also discuss how the structures of interpass boundaries are susceptible to localized recrystallization, grain growth and/or defect formation, and therefore, heterogeneous mechanical properties due to the adverse presence of unmelted powder inclusions.« less

Oligosaccharide formation during commercial pear juice processing.

PubMed

Willems, Jamie L; Low, Nicholas H

2016-08-01

The effect of enzyme treatment and processing on the oligosaccharide profile of commercial pear juice samples was examined by high performance anion exchange chromatography with pulsed amperometric detection and capillary gas chromatography with flame ionization detection. Industrial samples representing the major stages of processing produced with various commercial enzyme preparations were studied. Through the use of commercially available standards and laboratory scale enzymatic hydrolysis of pectin, starch and xyloglucan; galacturonic acid oligomers, glucose oligomers (e.g., maltose and cellotriose) and isoprimeverose were identified as being formed during pear juice production. It was found that the majority of polysaccharide hydrolysis and oligosaccharide formation occurred during enzymatic treatment at the pear mashing stage and that the remaining processing steps had minimal impact on the carbohydrate-based chromatographic profile of pear juice. Also, all commercial enzyme preparations and conditions (time and temperature) studied produced similar carbohydrate-based chromatographic profiles. Copyright © 2016 Elsevier Ltd. All rights reserved.

Computers for Manned Space Applications Base on Commercial Off-the-Shelf Components

NASA Astrophysics Data System (ADS)

Vogel, T.; Gronowski, M.

2009-05-01

Similar to the consumer markets there has been an ever increasing demand in processing power, signal processing capabilities and memory space also for computers used for science data processing in space. An important driver of this development have been the payload developers for the International Space Station, requesting high-speed data acquisition and fast control loops in increasingly complex systems. Current experiments now even perform video processing and compression with their payload controllers. Nowadays the requirements for a space qualified computer are often far beyond the capabilities of, for example, the classic SPARC architecture that is found in ERC32 or LEON CPUs. An increase in performance usually demands costly and power consuming application specific solutions. Continuous developments over the last few years have now led to an alternative approach that is based on complete electronics modules manufactured for commercial and industrial customers. Computer modules used in industrial environments with a high demand for reliability under harsh environmental conditions like chemical reactors, electrical power plants or on manufacturing lines are entered into a selection procedure. Promising candidates then undergo a detailed characterisation process developed by Astrium Space Transportation. After thorough analysis and some modifications, these modules can replace fully qualified custom built electronics in specific, although not safety critical applications in manned space. This paper focuses on the benefits of COTS1 based electronics modules and the necessary analyses and modifications for their utilisation in manned space applications on the ISS. Some considerations regarding overall systems architecture will also be included. Furthermore this paper will also pinpoint issues that render such modules unsuitable for specific tasks, and justify the reasons. Finally, the conclusion of this paper will advocate the implementation of COTS based electronics for a range of applications within specifically adapted systems. The findings in this paper are extrapolated from two reference computer systems, both having been launched in 2008. One of those was a LEON-2 based computer installed onboard the Columbus Orbital Facility while the other system consisted mainly of a commercial Power-PC module that was modified for a launch mounted on the ICC pallet in the Space Shuttle's cargo bay. Both systems are currently upgraded and extended for future applications.

76 FR 23993 - Proposed Information Collection; Comment Request; Alaska Individual Fishing Quotas (IFQs) for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... provides economic stability for the commercial hook-and-line fishery while reducing many of the... access fishery, while maintaining the social and economic character of the fixed gear fishery that is...

Use of Laboratory-Supplied Natural Gas in Breakthrough Phenomena.

ERIC Educational Resources Information Center

Eiceman, G. A.; And Others

1985-01-01

Natural gas from regular commercial lines contains enough carbon-8 and above hydrocarbon contaminants to serve as a satisfactory sample for breakthrough experiments. Procedures used, typical results obtained, and theoretical background information are provided. (JN)

Evaluation of commercial video-based intersection signal actuation systems.

DOT National Transportation Integrated Search

2008-12-01

Video cameras and computer image processors have come into widespread use for the detection of : vehicles for signal actuation at controlled intersections. Video is considered both a cost-saving and : convenient alternative to conventional stop-line ...

A Machine Learning Approach for Business Intelligence Analysis using Commercial Shipping Transaction Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bramer, Lisa M.; Chatterjee, Samrat; Holmes, Aimee E.

Business intelligence problems are particularly challenging due to the use of large volume and high velocity data in attempts to model and explain complex underlying phenomena. Incremental machine learning based approaches for summarizing trends and identifying anomalous behavior are often desirable in such conditions to assist domain experts in characterizing their data. The overall goal of this research is to develop a machine learning algorithm that enables predictive analysis on streaming data, detects changes and anomalies in the data, and can evolve based on the dynamic behavior of the data. Commercial shipping transaction data for the U.S. is used tomore » develop and test a Naïve Bayes model that classifies several companies into lines of businesses and demonstrates an ability to predict when the behavior of these companies changes by venturing into other lines of businesses.« less

Effects of Compounded Stanford Modified Oral Rinse (MucoLox) on the Survival and Migration of Oral Keratinocytes and Fibroblasts: Implications for Wound Healing.

PubMed

Song, Guiyun; Banov, Daniel; Bassani, August S

2018-01-01

Several oral rinses are commercially available to alleviate the symptoms of oral mucositis. Prolonged retention of active pharmaceutical ingredients in the oral cavity is a major problem. In this study, we modified the Stanford oral rinse by including a proprietary mucoadhesive polymer called MucoLox, which we hypothesized would improve active pharmaceutical ingredient mucoadhesion. Characterization of this newly compounded oral rinse showed absence of cytotoxicity in human oral keratinocyte and fibroblast cell lines. The compounded formulation significantly stimulated the migration of these two cell lines in Oris Cell Migration Assay plates, better than the reference commercial product Magic mouthwash. Based on this in vitro study, the new Stanford modified oral rinse with MucoLox is safe and may promote healing of oral mucositis. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

In operando quantitation of Li concentration for a commercial Li-ion rechargeable battery using high-energy X-ray Compton scattering.

PubMed

Suzuki, Kosuke; Suzuki, Ayahito; Ishikawa, Taiki; Itou, Masayoshi; Yamashige, Hisao; Orikasa, Yuki; Uchimoto, Yoshiharu; Sakurai, Yoshiharu; Sakurai, Hiroshi

2017-09-01

Compton scattering is one of the most promising probes for quantitating Li under in operando conditions, since high-energy X-rays, which have high penetration power, are used as the incident beam and the Compton-scattered energy spectrum has specific line-shapes for each element. An in operando quantitation method to determine the Li composition in electrodes has been developed by using line-shape (S-parameter) analysis of the Compton-scattered energy spectrum. In this study, S-parameter analysis has been applied to a commercial coin cell Li-ion rechargeable battery and the variation of the S-parameters during the charge/discharge cycle at the positive and negative electrodes has been obtained. By using calibration curves for Li composition in the electrodes, the change in Li composition of the positive and negative electrodes has been determined using the S-parameters simultaneously.

Enhancing ascorbate in fruits and tubers through over-expression of the L-galactose pathway gene GDP-L-galactose phosphorylase.

PubMed

Bulley, Sean; Wright, Michele; Rommens, Caius; Yan, Hua; Rassam, Maysoon; Lin-Wang, Kui; Andre, Christelle; Brewster, Di; Karunairetnam, Sakuntala; Allan, Andrew C; Laing, William A

2012-05-01

Ascorbate, or vitamin C, is obtained by humans mostly from plant sources. Various approaches have been made to increase ascorbate in plants by transgenic means. Most of these attempts have involved leaf material from model plants, with little success reported using genes from the generally accepted l-galactose pathway of ascorbate biosynthesis. We focused on increasing ascorbate in commercially significant edible plant organs using a gene, GDP-l-galactose phosphorylase (GGP or VTC2), that we had previously shown to increase ascorbate concentration in tobacco and Arabidopsis thaliana. The coding sequence of Actinidia chinensis GGP, under the control of the 35S promoter, was expressed in tomato and strawberry. Potato was transformed with potato or Arabidopsis GGP genes under the control of the 35S promoter or a polyubiquitin promoter (potato only). Five lines of tomato, up to nine lines of potato, and eight lines of strawberry were regenerated for each construct. Three lines of tomato had a threefold to sixfold increase in fruit ascorbate, and all lines of strawberry showed a twofold increase. All but one line of each potato construct also showed an increase in tuber ascorbate of up to threefold. Interestingly, in tomato fruit, increased ascorbate was associated with loss of seed and the jelly of locular tissue surrounding the seed which was not seen in strawberry. In both strawberry and tomato, an increase in polyphenolic content was associated with increased ascorbate. These results show that GGP can be used to raise significantly ascorbate concentration in commercially significant edible crops. © 2011 The Authors. Plant Biotechnology Journal © 2011 Society for Experimental Biology, Association of Applied Biologists and Blackwell Publishing Ltd.

The genetic basis of pectoralis major myopathies in modern broiler chicken lines.

PubMed

Bailey, Richard A; Watson, Kellie A; Bilgili, S F; Avendano, Santiago

2015-12-01

This is the first report providing estimates of the genetic basis of breast muscle myopathies (BMM) and their relationship with growth and yield in broiler chickens. In addition, this paper addresses the hypothesis that genetic selection for increase breast yield has contributed to the onset of BMM. Data were analyzed from ongoing recording of BMM within the Aviagen breeding program. This study focused on three BMM: deep pectoral myopathy (DPM; binary trait), white striping (WS; 4 categories) and wooden breast (WB; 3 categories). Data from two purebred commercial broiler lines (A and B) were utilized providing greater than 40,000 meat quality records per line. The difference in selection history between these two lines has resulted in contrasting breast yield (BY): 29% for Line A and 21% for Line B. Data were analyzed to estimate genetic parameters using a multivariate animal model including six traits: body weight (BW), processing body weight (PW), BY, DPM, WB, and WS, in addition to the appropriate fixed effects and permanent environmental effect of the dam. Results indicate similar patterns of heritability and genetic correlations for the two lines. Heritabilities (h2) of BW, PW and BY ranged from 0.271-0.418; for DPM and WB h2<0.1; and for WS h2≤0.338. Genetic correlations between the BMM and BW, PW, or BY were ≤0.132 in Line A and ≤0.248 in Line B. This paper demonstrates the polygenic nature of these traits and the low genetic relationships with BW, PW, and BY, which facilitates genetic improvement across all traits in a balanced breeding program. It also highlights the importance of understanding the environmental and/or management factors that contribute greater than 65% of the variance in the incidence of white striping of breast muscle and more than 90% of the variance of the incidence of wooden breast and deep pectoral myopathy in broiler chickens. © The Author 2015. Published by Oxford University Press on behalf of Poultry Science Association.

An active ac/ds transposon system for activation tagging in tomato cultivar m82 using clonal propagation.

PubMed

Carter, Jared D; Pereira, Andy; Dickerman, Allan W; Veilleux, Richard E

2013-05-01

Tomato (Solanum lycopersicum) is a model organism for Solanaceae in both molecular and agronomic research. This project utilized Agrobacterium tumefaciens transformation and the transposon-tagging construct Activator (Ac)/Dissociator (Ds)-ATag-Bar_gosGFP to produce activation-tagged and knockout mutants in the processing tomato cultivar M82. The construct carried hygromycin resistance (hyg), green fluorescent protein (GFP), and the transposase (TPase) of maize (Zea mays) Activator major transcript X054214.1 on the stable Ac element, along with a 35S enhancer tetramer and glufosinate herbicide resistance (BAR) on the mobile Ds-ATag element. An in vitro propagation strategy was used to produce a population of 25 T0 plants from a single transformed plant regenerated in tissue culture. A T1 population of 11,000 selfed and cv M82 backcrossed progeny was produced from the functional T0 line. This population was screened using glufosinate herbicide, hygromycin leaf painting, and multiplex polymerase chain reaction (PCR). Insertion sites of transposed Ds-ATag elements were identified through thermal asymmetric interlaced PCR, and resulting product sequences were aligned to the recently published tomato genome. A population of 509 independent, Ds-only transposant lines spanning all 12 tomato chromosomes has been developed. Insertion site analysis demonstrated that more than 80% of these lines harbored Ds insertions conducive to activation tagging. The capacity of the Ds-ATag element to alter transcription was verified by quantitative real-time reverse transcription-PCR in two mutant lines. The transposon-tagged lines have been immortalized in seed stocks and can be accessed through an online database, providing a unique resource for tomato breeding and analysis of gene function in the background of a commercial tomato cultivar.

Making Plant-Support Structures From Waste Plant Fiber

NASA Technical Reports Server (NTRS)

Morrow, Robert C.; < oscjmocl. < attjew K/; {ertzbprm. A,amda; Ej (e. Cjad); Hunt, John

2006-01-01

Environmentally benign, biodegradable structures for supporting growing plants can be made in a process based on recycling of such waste plant fiber materials as wheat straw or of such derivative materials as paper and cardboard. Examples of structures that can be made in this way include plant plugs, pots, planter-lining mats, plant fences, and root and shoot barriers. No chemical binders are used in the process. First, the plant material is chopped into smaller particles. The particles are leached with water or steam to remove material that can inhibit plant growth, yielding a fibrous slurry. If the desired structures are plugs or sheets, then the slurry is formed into the desired shapes in a pulp molding subprocess. If the desired structures are root and shoot barriers, pots, or fences, then the slurry is compression-molded to the desired shapes in a heated press. The processed materials in these structures have properties similar to those of commercial pressboard, but unlike pressboard, these materials contain no additives. These structures have been found to withstand one growth cycle, even when wet

SiGe BiCMOS manufacturing platform for mmWave applications

NASA Astrophysics Data System (ADS)

Kar-Roy, Arjun; Howard, David; Preisler, Edward; Racanelli, Marco; Chaudhry, Samir; Blaschke, Volker

2010-10-01

TowerJazz offers high volume manufacturable commercial SiGe BiCMOS technology platforms to address the mmWave market. In this paper, first, the SiGe BiCMOS process technology platforms such as SBC18 and SBC13 are described. These manufacturing platforms integrate 200 GHz fT/fMAX SiGe NPN with deep trench isolation into 0.18μm and 0.13μm node CMOS processes along with high density 5.6fF/μm2 stacked MIM capacitors, high value polysilicon resistors, high-Q metal resistors, lateral PNP transistors, and triple well isolation using deep n-well for mixed-signal integration, and, multiple varactors and compact high-Q inductors for RF needs. Second, design enablement tools that maximize performance and lowers costs and time to market such as scalable PSP and HICUM models, statistical and Xsigma models, reliability modeling tools, process control model tools, inductor toolbox and transmission line models are described. Finally, demonstrations in silicon for mmWave applications in the areas of optical networking, mobile broadband, phased array radar, collision avoidance radar and W-band imaging are listed.

Accelerator controls at CERN: Some converging trends

NASA Astrophysics Data System (ADS)

Kuiper, B.

1990-08-01

CERN's growing services to the high-energy physics community using frozen resources has led to the implementation of "Technical Boards", mandated to assist the management by making recommendations for rationalizations in various technological domains. The Board on Process Control and Electronics for Accelerators, TEBOCO, has emphasized four main lines which might yield economy in resources. First, a common architecture for accelerator controls has been agreed between the three accelerator divisions. Second, a common hardware/software kit has been defined, from which the large majority of future process interfacing may be composed. A support service for this kit is an essential part of the plan. Third, high-level protocols have been developed for standardizing access to process devices. They derive from agreed standard models of the devices and involve a standard control message. This should ease application development and mobility of equipment. Fourth, a common software engineering methodology and a commercial package of application development tools have been adopted. Some rationalization in the field of the man-machine interface and in matters of synchronization is also under way.

Comparison of mechanical and microstructural properties of conventional and severe plastic deformation processes

NASA Astrophysics Data System (ADS)

Szombathelyi, V.; Krallics, Gy

2014-08-01

The effect of the deformation processes on yield stress, Vickers microhardness and dislocation density were investigated using commercial purity (A1050) and alloyed aluminum (Al 6082). For the evolution of the dislocation density X-ray line profile analysis was used. In the large plastic strain range the variation of mechanical and microstructure evolution of A1050 and of Al 6082 processed by equal channel angular pressing are investigated using route BC and route C. In the plastic strain range up to 3 plane strain compression test was used to evaluate mechanical properties. The hardness and the yield stress showed a sharp increase after the first pass. In the case of A1050 it was found that the two examined routes has not resulted difference in the flow stress. In the case of Al 6082 the effect of the routes on the yield stress is significant. The present results showed that in the comparable plastic strain range higher yield stress values can be achieved by plane strain compression test than by ECAP.

Micropropagation of Helleborus through axillary budding.

PubMed

Beruto, Margherita; Viglione, Serena; Bisignano, Alessandro

2013-01-01

Helleborus genus, belonging to the Ranunculaceae family, has 20 species of herbaceous perennial flowering plants. The commercial exploitation of this plant is dependent on the selection and propagation of appropriate lines. High propagation rate could be accomplished by using a suitable tissue culture method enabling the rapid introduction of valuable selections in the market. However, in vitro cultivation of Helleborus is still very difficult. Thereby the development of reliable in vitro propagation procedures is crucial for future production systems. Axillary buds cultured on agar-solidified Murashige and Skoog medium supplemented with 1 mg/L benzyladenine, 0.1 mg/L β-naphthoxyacetic acid, and 2 mg/L isopentenyl adenine develop shoots after 16 weeks of culture under 16 h light regime, 50-60 μmol/s/m(2), and 19 ± 1°C. The multiplication rate ranges from 1.4 to 2.1. However, the genotype and the number of subcultures affect the efficiency of the micropropagation process. The rooting of shoots is about 80% in solidified MS medium containing 1 mg/L 1-naphthaleneacetic acid and 3 mg/L indole-3-butyric acid. The described protocol provides information which can contribute to the commercial production of Helleborus plants.