14 CFR 414.15 - Processing the initial application.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Processing the initial application. 414.15 Section 414.15 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING SAFETY APPROVALS Application Procedures § 414.15 Processing the...

Analytical Determination of Fluoride Ion Using Gran's Semi-Antilog Plot.

ERIC Educational Resources Information Center

Barnhard, Ralph J.

1983-01-01

A quantitative determination for fluoride ion using a commercially available fluoride electrode is described. The procedure referred to as known-addition is employed with the data processed on Gran's Plot Paper. Background information, experimental procedures, and advantages/disadvantages of the method are discussed. (JN)

16 CFR 2.2 - Complaint or request for Commission action.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... 2.2 Section 2.2 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE NONADJUDICATIVE PROCEDURES Inquiries; Investigations; Compulsory Processes § 2.2 Complaint or... complained of, filed with the Office of the Secretary in conformity with § 4.2(d) of this chapter. No forms...

16 CFR 2.2 - Complaint or request for Commission action.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... 2.2 Section 2.2 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE NONADJUDICATIVE PROCEDURES Inquiries; Investigations; Compulsory Processes § 2.2 Complaint or... complained of, filed with the Office of the Secretary in conformity with § 4.2(d) of this chapter. No forms...

40 CFR 63.7521 - What fuel analyses, fuel specification, and procedures must I use?

Code of Federal Regulations, 2011 CFR

2011-07-01

... fuel specification analyses for hydrogen sulfide and mercury according to the procedures in paragraphs... 40 Protection of Environment 13 2011-07-01 2011-07-01 false What fuel analyses, fuel specification..., Commercial, and Institutional Boilers and Process Heaters Testing, Fuel Analyses, and Initial Compliance...

Recovery and reuse of cellulase catalyst in an enzymatic cellulose hydrolysis process

DOEpatents

Woodward, J.

1987-09-18

A process for recovering cellulase from the hydrolysis of cellulose, and reusing it in subsequent hydrolyois procedures. The process utilizes a commercial adsorbent that efficiently removes cellulase from reaction products which can be easily removed by simple decantation. 1 fig., 4 tabs.

Space - A unique environment for process modeling R&D

NASA Technical Reports Server (NTRS)

Overfelt, Tony

1991-01-01

Process modeling, the application of advanced computational techniques to simulate real processes as they occur in regular use, e.g., welding, casting and semiconductor crystal growth, is discussed. Using the low-gravity environment of space will accelerate the technical validation of the procedures and enable extremely accurate determinations of the many necessary thermophysical properties. Attention is given to NASA's centers for the commercial development of space; joint ventures of universities, industries, and goverment agencies to study the unique attributes of space that offer potential for applied R&D and eventual commercial exploitation.

77 FR 61400 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

... military imagery as part of their standard operating procedure. The completed form allows the respondents... and equipment for commercial purposes. The form prescribes processes/standards that have been...

Commercial Implementation of Ultrasonic Velocity Imaging Methods via Cooperative Agreement Between NASA Lewis Research Center and Sonix, Inc.

NASA Technical Reports Server (NTRS)

Roth, Don J.; Hendricks, J. Lynne; Whalen, Mike F.; Bodis, James R.; Martin, Katherine

1996-01-01

This article describes the commercial implementation of ultrasonic velocity imaging methods developed and refined at NASA Lewis Research Center on the Sonix c-scan inspection system. Two velocity imaging methods were implemented: thickness-based and non-thickness-based reflector plate methods. The article demonstrates capabilities of the commercial implementation and gives the detailed operating procedures required for Sonix customers to achieve optimum velocity imaging results. This commercial implementation of velocity imaging provides a 100x speed increase in scanning and processing over the lab-based methods developed at LeRC. The significance of this cooperative effort is that the aerospace and other materials development-intensive industries which use extensive ultrasonic inspection for process control and failure analysis will now have an alternative, highly accurate imaging method commercially available.

CT and MRI slice separation evaluation by LabView developed software.

PubMed

Acri, Giuseppe; Testagrossa, Barbara; Sestito, Angela; Bonanno, Lilla; Vermiglio, Giuseppe

2018-02-01

The efficient use of Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) equipment necessitates establishing adequate quality-control (QC) procedures. In particular, the accuracy of slice separation, during multislices acquisition, requires scan exploration of phantoms containing test objects. To simplify such procedures, a novel phantom and a computerised LabView-based procedure have been devised, enabling determination the midpoint of full width at half maximum (FWHM) in real time while the distance from the profile midpoint of two progressive images is evaluated and measured. The results were compared with those obtained by processing the same phantom images with commercial software. To validate the proposed methodology the Fisher test was conducted on the resulting data sets. In all cases, there was no statistically significant variation between the commercial procedure and the LabView one, which can be used on any CT and MRI diagnostic devices. Copyright © 2017. Published by Elsevier GmbH.

75 FR 71596 - Energy Efficiency Program for Certain Commercial and Industrial Equipment: Test Procedures for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-24

... Efficiency Program for Certain Commercial and Industrial Equipment: Test Procedures for Commercial Refrigeration Equipment AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION... amendments to its test procedure for commercial refrigeration equipment (CRE). The amendments would update...

15 CFR 971.210 - Determination whether application is complete for further processing.

Code of Federal Regulations, 2011 CFR

2011-01-01

... COMMERCIAL RECOVERY PERMITS Applications Procedures § 971.210 Determination whether application is complete... it complete, why the additional information is necessary, and a reasonable date by which the...

Solution-mediated cladding doping of commercial polymer optical fibers

NASA Astrophysics Data System (ADS)

Stajanca, Pavol; Topolniak, Ievgeniia; Pötschke, Samuel; Krebber, Katerina

2018-03-01

Solution doping of commercial polymethyl methacrylate (PMMA) polymer optical fibers (POFs) is presented as a novel approach for preparation of custom cladding-doped POFs (CD-POFs). The presented method is based on a solution-mediated diffusion of dopant molecules into the fiber cladding upon soaking of POFs in a methanol-dopant solution. The method was tested on three different commercial POFs using Rhodamine B as a fluorescent dopant. The dynamics of the diffusion process was studied in order to optimize the doping procedure in terms of selection of the most suitable POF, doping time and conditions. Using the optimized procedure, longer segment of fluorescent CD-POF was prepared and its performance was characterized. Fiber's potential for sensing and illumination applications was demonstrated and discussed. The proposed method represents a simple and cheap way for fabrication of custom, short to medium length CD-POFs with various dopants.

Heat-treating of materials

NASA Technical Reports Server (NTRS)

Widener, Edward L.

1992-01-01

The objective was to introduce those solid state transformations of material structures known as 'heat treatments' and to emphasize the commercial importance of common processes for metals as well as non-metals. Experimental procedures are explained for annealing, quenching, hardening, and temper.

22 CFR Appendix A to Part 194 - Inter-American Commercial Arbitration Commission Rules of Procedure (As Amended April 1, 2002)

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Inter-American Commercial Arbitration... DEPARTMENT OF STATE INTERNATIONAL COMMERCIAL ARBITRATION INTER-AMERICAN COMMERCIAL ARBITRATION COMMISSION RULES OF PROCEDURE Pt. 194, App. A Appendix A to Part 194—Inter-American Commercial Arbitration...

22 CFR Appendix A to Part 194 - Inter-American Commercial Arbitration Commission Rules of Procedure (As Amended April 1, 2002)

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Inter-American Commercial Arbitration... DEPARTMENT OF STATE INTERNATIONAL COMMERCIAL ARBITRATION INTER-AMERICAN COMMERCIAL ARBITRATION COMMISSION RULES OF PROCEDURE Pt. 194, App. A Appendix A to Part 194—Inter-American Commercial Arbitration...

22 CFR Appendix A to Part 194 - Inter-American Commercial Arbitration Commission Rules of Procedure (As Amended April 1, 2002)

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Inter-American Commercial Arbitration... DEPARTMENT OF STATE INTERNATIONAL COMMERCIAL ARBITRATION INTER-AMERICAN COMMERCIAL ARBITRATION COMMISSION RULES OF PROCEDURE Pt. 194, App. A Appendix A to Part 194—Inter-American Commercial Arbitration...

22 CFR Appendix A to Part 194 - Inter-American Commercial Arbitration Commission Rules of Procedure (As Amended April 1, 2002)

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Inter-American Commercial Arbitration... DEPARTMENT OF STATE INTERNATIONAL COMMERCIAL ARBITRATION INTER-AMERICAN COMMERCIAL ARBITRATION COMMISSION RULES OF PROCEDURE Pt. 194, App. A Appendix A to Part 194—Inter-American Commercial Arbitration...

19 CFR 128.23 - Entry requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... utilizing the procedures in this part shall comply with the requirements of the Customs Automated Commercial System (ACS). These requirements include those under the Automated Manifest System (AMS), Cargo Selectivity, Statement Processing, the Automated Broker Interface System (ABI), and enhancements of ACS. (2...

47 CFR 64.402 - Policies and procedures for the provision of priority access service by commercial mobile radio...

Code of Federal Regulations, 2010 CFR

2010-10-01

... priority access service by commercial mobile radio service providers. 64.402 Section 64.402... RULES RELATING TO COMMON CARRIERS Procedures for Handling Priority Services in Emergencies § 64.402 Policies and procedures for the provision of priority access service by commercial mobile radio service...

16 CFR 1.95 - Procedures upon election.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Procedures upon election. 1.95 Section 1.95 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Penalties for Violation of Appliance Labeling Rules § 1.95 Procedures upon election. (a) After...

16 CFR 1.20 - Alternative procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Alternative procedures. 1.20 Section 1.20 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Rules and Rulemaking Under Section 18(a)(1)(B) of the FTC Act § 1.20 Alternative procedures. If...

32 CFR 169a.14 - Military personnel commercial activity.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false Military personnel commercial activity. 169a.14 Section 169a.14 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DEFENSE CONTRACTING COMMERCIAL ACTIVITIES PROGRAM PROCEDURES Procedures § 169a.14 Military personnel commercial...

32 CFR 169a.14 - Military personnel commercial activity.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false Military personnel commercial activity. 169a.14 Section 169a.14 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DEFENSE CONTRACTING COMMERCIAL ACTIVITIES PROGRAM PROCEDURES Procedures § 169a.14 Military personnel commercial...

32 CFR 169a.14 - Military personnel commercial activity.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Military personnel commercial activity. 169a.14 Section 169a.14 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DEFENSE CONTRACTING COMMERCIAL ACTIVITIES PROGRAM PROCEDURES Procedures § 169a.14 Military personnel commercial...

77 FR 4800 - Notice of Petition for Waiver of Hussmann From the Department of Energy Commercial Refrigerator...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-31

... for interim waiver; and (4) DOE rulemakings and waivers regarding commercial refrigeration equipment... authority to establish and amend test procedures for commercial refrigeration equipment. On December 8, 2006, DOE published a final rule adopting test procedures for commercial refrigeration equipment, effective...

16 CFR 1605.3 - Compulsory processes and the service thereof.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... 1605.3 Section 1605.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FLAMMABLE FABRICS ACT REGULATIONS INVESTIGATIONS, INSPECTIONS AND INQUIRIES PURSUANT TO THE FLAMMABLE FABRICS ACT Procedures for...) By personal service upon the person, or agent-in-charge of the sole proprietorship, partnership, or...

16 CFR 1605.3 - Compulsory processes and the service thereof.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... 1605.3 Section 1605.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FLAMMABLE FABRICS ACT REGULATIONS INVESTIGATIONS, INSPECTIONS AND INQUIRIES PURSUANT TO THE FLAMMABLE FABRICS ACT Procedures for...) By personal service upon the person, or agent-in-charge of the sole proprietorship, partnership, or...

16 CFR 1605.3 - Compulsory processes and the service thereof.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... 1605.3 Section 1605.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FLAMMABLE FABRICS ACT REGULATIONS INVESTIGATIONS, INSPECTIONS AND INQUIRIES PURSUANT TO THE FLAMMABLE FABRICS ACT Procedures for...) By personal service upon the person, or agent-in-charge of the sole proprietorship, partnership, or...

Assessment and certification of neonatal incubator sensors through an inferential neural network.

PubMed

de Araújo, José Medeiros; de Menezes, José Maria Pires; Moura de Albuquerque, Alberto Alexandre; da Mota Almeida, Otacílio; Ugulino de Araújo, Fábio Meneghetti

2013-11-15

Measurement and diagnostic systems based on electronic sensors have been increasingly essential in the standardization of hospital equipment. The technical standard IEC (International Electrotechnical Commission) 60601-2-19 establishes requirements for neonatal incubators and specifies the calibration procedure and validation tests for such devices using sensors systems. This paper proposes a new procedure based on an inferential neural network to evaluate and calibrate a neonatal incubator. The proposal presents significant advantages over the standard calibration process, i.e., the number of sensors is drastically reduced, and it runs with the incubator under operation. Since the sensors used in the new calibration process are already installed in the commercial incubator, no additional hardware is necessary; and the calibration necessity can be diagnosed in real time without the presence of technical professionals in the neonatal intensive care unit (NICU). Experimental tests involving the aforementioned calibration system are carried out in a commercial incubator in order to validate the proposal.

Assessment and Certification of Neonatal Incubator Sensors through an Inferential Neural Network

PubMed Central

de Araújo Júnior, José Medeiros; de Menezes Júnior, José Maria Pires; de Albuquerque, Alberto Alexandre Moura; Almeida, Otacílio da Mota; de Araújo, Fábio Meneghetti Ugulino

2013-01-01

Measurement and diagnostic systems based on electronic sensors have been increasingly essential in the standardization of hospital equipment. The technical standard IEC (International Electrotechnical Commission) 60601-2-19 establishes requirements for neonatal incubators and specifies the calibration procedure and validation tests for such devices using sensors systems. This paper proposes a new procedure based on an inferential neural network to evaluate and calibrate a neonatal incubator. The proposal presents significant advantages over the standard calibration process, i.e., the number of sensors is drastically reduced, and it runs with the incubator under operation. Since the sensors used in the new calibration process are already installed in the commercial incubator, no additional hardware is necessary; and the calibration necessity can be diagnosed in real time without the presence of technical professionals in the neonatal intensive care unit (NICU). Experimental tests involving the aforementioned calibration system are carried out in a commercial incubator in order to validate the proposal. PMID:24248278

Exploitation of rights from the US space program by NASA: Review of the process

NASA Technical Reports Server (NTRS)

Kempf, Robert; Gimeno, Benjamin

1995-01-01

The legal environment, and some observations on the policies, procedures, and practices developed and instituted by NASA with regard to the treatment of intellectual property rights arising out of NASA support, are presented. The allocation, protection, and exercise (or exploitation) of such rights are considered. Focus is on the exercise (or exploitation) of intellectual property rights in a manner that provides an incentive to achieve beneficial or commercial use by the private sector of technology resulting from the U.S. space program. While some emphasis is on matters unique to the U.S. space program, many of the policies, procedures, and practices supported research and development activities. The process of making the results of U.S. government supported research and development activities available to the private sector for beneficial or commercial use, whether or not subject to intellectual property rights protection, is commonly known as technology transfer. Consequently, the consideration of intellectual property rights is in the context of the broader technology transfer objectives of NASA.

High temperature pre-digestion of corn stover biomass for improved product yields

DOE PAGES

Brunecky, Roman; Hobdey, Sarah E.; Taylor, Larry E.; ...

2014-12-03

Introduction: The efficient conversion of lignocellulosic feedstocks remains a key step in the commercialization of biofuels. One of the barriers to cost-effective conversion of lignocellulosic biomass to sugars remains the enzymatic saccharification process step. Here, we describe a novel hybrid processing approach comprising enzymatic pre-digestion with newly characterized hyperthermophilic enzyme cocktails followed by conventional saccharification with commercial enzyme preparations. Dilute acid pretreated corn stover was subjected to this new procedure to test its efficacy. Thermal tolerant enzymes from Acidothermus cellulolyticus and Caldicellulosiruptor bescii were used to pre-digest pretreated biomass at elevated temperatures prior to saccharification by the commercial cellulase formulation.more » Results: We report that pre-digestion of biomass with these enzymes at elevated temperatures prior to addition of the commercial cellulase formulation increased conversion rates and yields when compared to commercial cellulase formulation alone under low solids conditions. In conclusion, Our results demonstrating improvements in rates and yields of conversion point the way forward for hybrid biomass conversion schemes utilizing catalytic amounts of hyperthermophilic enzymes.« less

Slice-thickness evaluation in CT and MRI: an alternative computerised procedure.

PubMed

Acri, G; Tripepi, M G; Causa, F; Testagrossa, B; Novario, R; Vermiglio, G

2012-04-01

The efficient use of computed tomography (CT) and magnetic resonance imaging (MRI) equipment necessitates establishing adequate quality-control (QC) procedures. In particular, the accuracy of slice thickness (ST) requires scan exploration of phantoms containing test objects (plane, cone or spiral). To simplify such procedures, a novel phantom and a computerised LabView-based procedure have been devised, enabling determination of full width at half maximum (FWHM) in real time. The phantom consists of a polymethyl methacrylate (PMMA) box, diagonally crossed by a PMMA septum dividing the box into two sections. The phantom images were acquired and processed using the LabView-based procedure. The LabView (LV) results were compared with those obtained by processing the same phantom images with commercial software, and the Fisher exact test (F test) was conducted on the resulting data sets to validate the proposed methodology. In all cases, there was no statistically significant variation between the two different procedures and the LV procedure, which can therefore be proposed as a valuable alternative to other commonly used procedures and be reliably used on any CT and MRI scanner.

78 FR 72072 - Decision and Order Granting a Waiver to Hussmann From the Department of Energy Commercial...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-02

... procedure for commercial refrigeration equipment because the equipment cannot operate at the specified... Program for certain industrial equipment, which includes commercial refrigeration equipment, the focus of... establish and amend test procedures for commercial refrigeration equipment. (42 U.S.C. 6314(a)(6)(C)) On...

Science should not be abandoned in a bid to resolve whaling disputes.

PubMed

Cooke, Justin; Leaper, Russell; Papastavrou, Vassili

2009-10-23

The International Whaling Commission (IWC) is currently engaged in an intensive negotiating process in an attempt to resolve international disputes about whaling. The IWC has pioneered and agreed a management procedure approach for setting catch limits for commercial whaling that was unanimously recommended by its Scientific Committee. It is disturbing that current negotiations are moving towards discarding this agreed and carefully developed scientific procedure in favour of ad hoc catch allowances based on political expediency.

Processing of non-oxide ceramics from sol-gel methods

DOEpatents

Landingham, Richard; Reibold, Robert A.; Satcher, Joe

2014-12-12

A general procedure applied to a variety of sol-gel precursors and solvent systems for preparing and controlling homogeneous dispersions of very small particles within each other. Fine homogenous dispersions processed at elevated temperatures and controlled atmospheres make a ceramic powder to be consolidated into a component by standard commercial means: sinter, hot press, hot isostatic pressing (HIP), hot/cold extrusion, spark plasma sinter (SPS), etc.

Evaluation of low-cost commercial-off-the-shelf autopilot systems for SUAS operations

NASA Astrophysics Data System (ADS)

Brown, Calvin Thomas

With this increase in unmanned aircraft system (UAS) operations, there is a need for a structured process to evaluate different commercially available systems, particularly autopilots. The Remotely Operated Aircraft Management, Interpretation, and Navigation from Ground or ROAMING scale was developed to meet this need. This scale is a modification of the widely accepted Handling Qualities Rating scale developed by George Cooper and Robert Harper Jr. The Cooper-Harper scale allows pilots to rate a vehicle's performance in completing some task. Similarly, the ROAMING scale allows UAS operators to evaluate the management and observability of UAS in completing some task. The standardized evaluative process consists of cost, size, weight, and power (SWAP) analysis, ease of implementation through procedural description of setup, ROAMING scale rating, a slightly modified NASA TLX rating, and comparison of manual operation to autonomous operation of the task. This standard for evaluation of autopilots and their software will lead to better understanding of the workload placed on UAS operators and indicate where improvements to design and operational procedures can be made. An assortment of low-cost commercial-off-the-shelf (COTS) autopilots were selected for use in the development of the evaluation and results of these tests demonstrate the commonalities and differences in these systems.

Land remote sensing commercialization: A status report

NASA Technical Reports Server (NTRS)

Bishop, W. P.; Heacock, E. L.

1984-01-01

The current offer by the United States Department of Commerce to transfer the U.S. land remote sensing program to the private sector is described. A Request for Proposals (RFP) was issued, soliciting offers from U.S. firms to provide a commercial land remote sensing satellite system. Proposals must address a complete system including satellite, communications, and ground data processing systems. Offerors are encouraged to propose to take over the Government LANDSAT system which consists of LANDSAT 4 and LANDSAT D'. Also required in proposals are the market development procedures and plans to ensure that commercialization is feasible and the business will become self-supporting at the earliest possible time. As a matter of Federal Policy, the solicitation is designed to protect both national security and foreign policy considerations. In keeping with these concerns, an offeror must be a U.S. Firm. Requirements for data quality, quantity, distribution and delivery are met by current operational procedures. It is the Government's desire that the Offeror be prepared to develop and operate follow-on systems without Government subsidies. However, to facilitate rapid commercialization, an offeror may elect to include in his proposal mechanisms for short term government financial assistance.

47 CFR 13.209 - Examination procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL RADIO OPERATORS Examination System § 13.209 Examination procedures. (a) Each examination for a commercial radio operator license must be administered at a... examinee to comply with its instructions. (b) Each examinee, when taking an examination for a commercial...

5 CFR 1204.14 - Requests for access to confidential commercial information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... commercial information. 1204.14 Section 1204.14 Administrative Personnel MERIT SYSTEMS PROTECTION BOARD ORGANIZATION AND PROCEDURES AVAILABILITY OF OFFICIAL INFORMATION Procedures for Obtaining Records Under the...) The term submitter means any person or organization that provides confidential commercial information...

5 CFR 1204.14 - Requests for access to confidential commercial information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... commercial information. 1204.14 Section 1204.14 Administrative Personnel MERIT SYSTEMS PROTECTION BOARD ORGANIZATION AND PROCEDURES AVAILABILITY OF OFFICIAL INFORMATION Procedures for Obtaining Records Under the...) The term submitter means any person or organization that provides confidential commercial information...

5 CFR 1204.14 - Requests for access to confidential commercial information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... commercial information. 1204.14 Section 1204.14 Administrative Personnel MERIT SYSTEMS PROTECTION BOARD ORGANIZATION AND PROCEDURES AVAILABILITY OF OFFICIAL INFORMATION Procedures for Obtaining Records Under the...) The term submitter means any person or organization that provides confidential commercial information...

5 CFR 1204.14 - Requests for access to confidential commercial information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... commercial information. 1204.14 Section 1204.14 Administrative Personnel MERIT SYSTEMS PROTECTION BOARD ORGANIZATION AND PROCEDURES AVAILABILITY OF OFFICIAL INFORMATION Procedures for Obtaining Records Under the...) The term submitter means any person or organization that provides confidential commercial information...

5 CFR 1204.14 - Requests for access to confidential commercial information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... commercial information. 1204.14 Section 1204.14 Administrative Personnel MERIT SYSTEMS PROTECTION BOARD ORGANIZATION AND PROCEDURES AVAILABILITY OF OFFICIAL INFORMATION Procedures for Obtaining Records Under the...) The term submitter means any person or organization that provides confidential commercial information...

Modified Process Reduces Porosity when Soldering in Reduced Gravity Environments

NASA Technical Reports Server (NTRS)

Watson, Kevin; Struk, Peter; Pettegrew, Richard; Downs, Robert; Haylett, Daniel

2012-01-01

A modified process yields lower levels of internal porosity for solder joints produced in reduced-gravity environments. The process incorporates both alternative materials and a modified procedure. The process provides the necessary cleaning action to enable effective bonding of the applied solder alloy with the materials to be joined. The modified process incorporates a commercially available liquid flux that is applied to the solder joint before heating with the soldering iron. It is subsequently heated with the soldering iron to activate the cleaning action of the flux and to evaporate most of the flux, followed by application of solder alloy in the form of commercially available solid solder wire (containing no flux). Continued heating ensures adequate flow of the solder alloy around and onto the materials to be joined. The final step is withdrawal of the soldering iron to allow alloy solidification and cooling of the solder joint.

Characterization of PMR polyimide resin and prepreg

NASA Technical Reports Server (NTRS)

Lindenmeyer, P. H.; Sheppard, C. H.

1984-01-01

Procedures for the chemical characterization of PMR-15 resin solutions and graphite-reinforced prepregs were developed, and a chemical data base was established. In addition, a basic understanding of PMR-15 resin chemistry was gained; this was translated into effective processing procedures for the production of high quality graphite composites. During the program the PMR monomers and selected model compounds representative of postulated PMR-15 solution chemistry were acquired and characterized. Based on these data, a baseline PMR-15 resin was formulated and evaluated for processing characteristics and composite properties. Commercially available PMR-15 resins were then obtained and chemically characterized. Composite panels were fabricated and evaluated.

The Resolution of Ibuprofen, 2-(4'-Isobutylphenyl) Propionic Acid

ERIC Educational Resources Information Center

McCullagh, James V.

2008-01-01

In this experiment the over-the-counter pain reliever ibuprofen is resolved using (S)-(-)-[alpha]-phenethylamine as the resolving agent. This procedure has several key advantages over previous resolution experiments. First, it involves the resolution of a well-known medicinal compound of commercial importance. Second, the resolution process is…

7 CFR 58.142 - Product quality and stability.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Procedures § 58.142 Product quality and stability. The receiving, holding and processing of milk and cream... accordance with clean and sanitary methods, consistent with good commercial practices to promote the production of the highest quality of finished product and improve product stability. Milk should not be more...

7 CFR 58.142 - Product quality and stability.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Procedures § 58.142 Product quality and stability. The receiving, holding and processing of milk and cream... accordance with clean and sanitary methods, consistent with good commercial practices to promote the production of the highest quality of finished product and improve product stability. Milk should not be more...

7 CFR 58.142 - Product quality and stability.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Procedures § 58.142 Product quality and stability. The receiving, holding and processing of milk and cream... accordance with clean and sanitary methods, consistent with good commercial practices to promote the production of the highest quality of finished product and improve product stability. Milk should not be more...

7 CFR 58.142 - Product quality and stability.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Procedures § 58.142 Product quality and stability. The receiving, holding and processing of milk and cream... accordance with clean and sanitary methods, consistent with good commercial practices to promote the production of the highest quality of finished product and improve product stability. Milk should not be more...

75 FR 17170 - Notice of Opportunity To Request a Hearing for the License Application From International...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-05

... Fluoride Extraction and Uranium Deconversion Facility in Lea County NM and Order Imposing Procedures for... application from International Isotopes Fluorine Products, Inc. (IIFP), for a proposed fluoride extraction and... applicant to process depleted uranium hexafluoride (DUF 6 ) into commercially resalable fluoride products...

Science should not be abandoned in a bid to resolve whaling disputes

PubMed Central

Cooke, Justin; Leaper, Russell; Papastavrou, Vassili

2009-01-01

The International Whaling Commission (IWC) is currently engaged in an intensive negotiating process in an attempt to resolve international disputes about whaling. The IWC has pioneered and agreed a management procedure approach for setting catch limits for commercial whaling that was unanimously recommended by its Scientific Committee. It is disturbing that current negotiations are moving towards discarding this agreed and carefully developed scientific procedure in favour of ad hoc catch allowances based on political expediency. PMID:19515654

Moving Technologies from the Test Tube to Commercial Products

NASA Technical Reports Server (NTRS)

Bryant, Robert G.

2013-01-01

Successful technologies include objects, processes, and procedures that share a common theme; they are being used to generate new products that create economic growth. The foundation is the invention, but the invention is a small part of the overall effort. The pathway to success is understanding the competition, proper planning, record keeping, integrating a supply chain, understanding actual costs, intellectual property (IP), benchmarking, and timing. Additionally, there are obstacles that include financing, what to make, buy, and sell, and the division of labor i.e. recognizing who is best at what task. Over the past two decades, NASA Langley Research Center (LaRC) has developed several commercially available technologies. The approach to commercialization of three of these inventions; Langley Research Center-Soluble Imide (LaRC-SI, Imitec Inc.), the Thin Layer Unimorph Driver (THUNDER, FACE International), and the Macrofiber Composite (MFC, Smart Material Corp.) will be described, as well as some of the lessons learned from the process. What makes these three inventions interesting is that one was created in the laboratory; another was built using the previous invention as part of its process, and the last one was created by packaging commercial-off-the-shelf (COTS) materials thereby creating a new component.

47 CFR 10.210 - CMAS participation election procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false CMAS participation election procedures. 10.210 Section 10.210 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL MOBILE ALERT SYSTEM Election to Participate in Commercial Mobile Alert System § 10.210 CMAS participation election procedures...

10 CFR 9.28 - Predisclosure notification procedures for information containing trade secrets or confidential...

Code of Federal Regulations, 2010 CFR

2010-01-01

... containing trade secrets or confidential commercial or financial information. 9.28 Section 9.28 Energy... notification procedures for information containing trade secrets or confidential commercial or financial... secrets or confidential commercial or financial information, or the NRC believes the information contains...

10 CFR 9.28 - Predisclosure notification procedures for information containing trade secrets or confidential...

Code of Federal Regulations, 2011 CFR

2011-01-01

... containing trade secrets or confidential commercial or financial information. 9.28 Section 9.28 Energy... notification procedures for information containing trade secrets or confidential commercial or financial... secrets or confidential commercial or financial information, or the NRC believes the information contains...

10 CFR 9.28 - Predisclosure notification procedures for information containing trade secrets or confidential...

Code of Federal Regulations, 2013 CFR

2013-01-01

... containing trade secrets or confidential commercial or financial information. 9.28 Section 9.28 Energy... notification procedures for information containing trade secrets or confidential commercial or financial... secrets or confidential commercial or financial information, or the NRC believes the information contains...

10 CFR 9.28 - Predisclosure notification procedures for information containing trade secrets or confidential...

Code of Federal Regulations, 2012 CFR

2012-01-01

... containing trade secrets or confidential commercial or financial information. 9.28 Section 9.28 Energy... notification procedures for information containing trade secrets or confidential commercial or financial... secrets or confidential commercial or financial information, or the NRC believes the information contains...

10 CFR 9.28 - Predisclosure notification procedures for information containing trade secrets or confidential...

Code of Federal Regulations, 2014 CFR

2014-01-01

... containing trade secrets or confidential commercial or financial information. 9.28 Section 9.28 Energy... notification procedures for information containing trade secrets or confidential commercial or financial... secrets or confidential commercial or financial information, or the NRC believes the information contains...

Needs analysis of a flexible computerized management infrastructure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Usman, S.; Hajek, B. K.; Ali, S. F.

2006-07-01

The United States' Energy Policy Act of 2005 is expected to facilitate construction of new commercial nuclear power plants. In the meanwhile, current plants are in the process of obtaining licenses for extended operation beyond their predetermined design life. In this beneficial yet challenging situation, it seems desirable to develop a strategic plan for smooth and seamless transition from paper based procedure systems to computer based procedure systems for improved performance and safety of the existing nuclear power plants. Many utilities already maintain procedures using word processing software, but it is common to print paper copies for daily use. Atmore » this time it is highly desirable to better understand the collective as well as individual document management needs of a commercial nuclear power plant as they migrate to a computer based system. As a contributory role in initiating a strategic plan, this paper offers a comprehensive questionnaire that is suitable for conducting a survey to determine the related needs of the utilities. The questionnaire covers three major areas: Formatting and User Friendly Features; Technical and Environmental Considerations; and Safety, System Integrity and Regulatory Considerations. A plan to conduct the proposed survey is also outlined in the future work section of this paper. (authors)« less

Alternative antimicrobial commercial egg washing procedures

USDA-ARS?s Scientific Manuscript database

Commercial table eggs are washed prior to packaging. Standard wash procedures use an alkaline pH and warm water. If a cool water method could be developed that would still provide a microbiologically safe egg, the industry may save energy costs associated with water heating. Four wash procedures ...

Data Processing for NASA's TDRSS DAMA Channel

NASA Technical Reports Server (NTRS)

Long, Christopher C.; Horan, Stephen

1996-01-01

A concept for the addition of a Demand Assignment Multiple Access (DAMA) service to NASA's current Space Network (SN) is developed. Specifically, the design of a receiver for the DAMA channel is outlined. Also, an outline of the procedures taken to process the received service request is presented. The modifications to the (SN) system are minimal. The post reception processing is accomplished using standard commercial off the shelf (COTS) packages. The result is a random access system capable of receiving requests for service.

Accessing space: A catalogue of process, equipment and resources for commercial users

NASA Technical Reports Server (NTRS)

1988-01-01

This catalogue, produced by NASA's Office of Commercial Programs, provides a broad source of information for the commercial developer interested in the areas of microgravity research and remote sensing. Methods for accessing space for research are reviewed including the shuttle, expendable launch vehicles, suborbital sounding rockets, experimental aircraft, and drop towers and other ground-based facilities. Procedures for using these vehicles and facilities are described along with funding options to pay for their use. Experiment apparatus and carriers for microgravity research are also described. A separate directory of resources and services is also included which contains a listing of transportation products and services, a listing of businesses and industries which provide space-related services and products, and a listing of the NASA and CCDS (Center for the Commercial Development of Space) points of contact.

A single-step simultaneous protein staining procedure for polyacrylamide gels and nitrocellulose membranes by Alta during western blot analysis.

PubMed

Pal, Jayanta K; Berwal, Sunil K; Soni, Rupali N

2012-01-01

A simple method for staining of proteins simultaneously on sodium dodecyl sulfate (SDS) polyacrylamide gels and nitrocellulose membranes by Alta during western blot analysis is described. A 5% solution of Alta, a commercially available cosmetic preparation, is added in the upper tank buffer during electrophoresis. On completion of electrophoresis, the gel is washed in distilled water and viewed on a white light plate and a transilluminator to photograph the protein profiles. The gel is processed for western blot transfer of proteins onto a nitrocellulose membrane, and upon completion, the protein profiles on the membrane are viewed and photographed as stated above. The membrane can then be processed for immunostaining as per the standard procedure. Thus, the staining procedure using Alta is simple, rapid (without any need of destaining), and cost-effective.

16 CFR 1301.7 - Test procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test procedures. 1301.7 Section 1301.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS BAN OF UNSTABLE REFUSE BINS § 1301.7 Test procedures. (a) The refuse bin shall be tested by applying forces as...

16 CFR 1027.8 - Procedures for salary offset.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Procedures for salary offset. 1027.8 Section 1027.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL SALARY OFFSET § 1027.8 Procedures for salary offset. (a) Deductions to liquidate an employee's debt will be by the method and in the...

CVD diamond substrate for microelectronics. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burden, J.; Gat, R.

1996-11-01

Chemical Vapor Deposition (CVD) of diamond films has evolved dramatically in recent years, and commercial opportunities for diamond substrates in thermal management applications are promising. The objective of this technology transfer initiative (TTI) is for Applied Science and Technology, Inc. (ASTEX) and AlliedSignal Federal Manufacturing and Technologies (FM&T) to jointly develop and document the manufacturing processes and procedures required for the fabrication of multichip module circuits using CVD diamond substrates, with the major emphasis of the project concentrating on lapping/polishing prior to metallization. ASTEX would provide diamond films for the study, and FM&T would use its experience in lapping, polishing,more » and substrate metallization to perform secondary processing on the parts. The primary goal of the project was to establish manufacturing processes that lower the manufacturing cost sufficiently to enable broad commercialization of the technology.« less

Direct optical detection of protein-ligand interactions.

PubMed

Gesellchen, Frank; Zimmermann, Bastian; Herberg, Friedrich W

2005-01-01

Direct optical detection provides an excellent means to investigate interactions of molecules in biological systems. The dynamic equilibria inherent to these systems can be described in greater detail by recording the kinetics of a biomolecular interaction. Optical biosensors allow direct detection of interaction patterns without the need for labeling. An overview covering several commercially available biosensors is given, with a focus on instruments based on surface plasmon resonance (SPR) and reflectometric interference spectroscopy (RIFS). Potential assay formats and experimental design, appropriate controls, and calibration procedures, especially when handling low molecular weight substances, are discussed. The single steps of an interaction analysis combined with practical tips for evaluation, data processing, and interpretation of kinetic data are described in detail. In a practical example, a step-by-step procedure for the analysis of a low molecular weight compound interaction with serum protein, determined on a commercial SPR sensor, is presented.

Recovery of viruses from water by a modified flocculation procedure for second-step concentration.

PubMed Central

Dahling, D R; Wright, B A

1986-01-01

A reduction in virus recovery efficiencies stemming from a change in the commercial processing of powdered beef extract was reversed by the addition of Celite analytical filter aid. Supplementing beef extract with this silicate is recommended as a modification to the organic flocculation procedure for second-step concentration in monitoring for waterborne viruses. Considerable differences in virus recovery were found among lots of beef extract and Celite preparations; this indicates that the performance of each lot of these substances should be checked before use. PMID:3015024

78 FR 33262 - Energy Efficiency Program for Commercial and Industrial Equipment: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-04

... security screening procedures. If a foreign national wishes to participate in the public meeting, please..., Microsoft Word, PDF, or ASCII file format, and avoid the use of special characters or any form of encryption... that comments sent by mail are often delayed and may be damaged by mail screening processes.) Hand...

75 FR 64737 - Automated Commercial Environment (ACE): Announcement of a National Customs Automation Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-20

... Commissioner of CBP with authority to conduct limited test programs or procedures designed to evaluate planned.... Specifically, CBP is looking for test participants to include: 2-3 Ocean Carriers. At least one must be filing... their software ready to test with CBP once CBP begins the certification process. CBP will post the...

76 FR 14362 - Policies To Promote Rural Radio Service and To Streamline Allotment and Assignment Procedures

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-16

... set forth in the First R&O, the Priority is premised on the unique ability of Tribes and Tribal... services the Tribal Priority generally operates as a dispositive preference in the application process... Tribal Priority operates as a dispositive preference in the AM commercial and FM NCE application contexts...

SPRT Calibration Uncertainties and Internal Quality Control at a Commercial SPRT Calibration Facility

NASA Astrophysics Data System (ADS)

Wiandt, T. J.

2008-06-01

The Hart Scientific Division of the Fluke Corporation operates two accredited standard platinum resistance thermometer (SPRT) calibration facilities, one at the Hart Scientific factory in Utah, USA, and the other at a service facility in Norwich, UK. The US facility is accredited through National Voluntary Laboratory Accreditation Program (NVLAP), and the UK facility is accredited through UKAS. Both provide SPRT calibrations using similar equipment and procedures, and at similar levels of uncertainty. These uncertainties are among the lowest available commercially. To achieve and maintain low uncertainties, it is required that the calibration procedures be thorough and optimized. However, to minimize customer downtime, it is also important that the instruments be calibrated in a timely manner and returned to the customer. Consequently, subjecting the instrument to repeated calibrations or extensive repeated measurements is not a viable approach. Additionally, these laboratories provide SPRT calibration services involving a wide variety of SPRT designs. These designs behave differently, yet predictably, when subjected to calibration measurements. To this end, an evaluation strategy involving both statistical process control and internal consistency measures is utilized to provide confidence in both the instrument calibration and the calibration process. This article describes the calibration facilities, procedure, uncertainty analysis, and internal quality assurance measures employed in the calibration of SPRTs. Data will be reviewed and generalities will be presented. Finally, challenges and considerations for future improvements will be discussed.

77 FR 2916 - Policies To Promote Rural Radio Service and To Streamline Allotment and Assignment Procedures

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-20

...In this document, the Commission adopted procedures designed to promote the initiation of commercial FM radio service by and to Native American tribes, by providing a procedure for such tribes to establish threshold qualifications when applying for commercial FM allotments added to the Table of Allotments using the Commission's Tribal Priority.

Microstructural characterization and hardness properties of electric resistance welding titanium joints for dental applications.

PubMed

Ceschini, Lorella; Boromei, Iuri; Morri, Alessandro; Nardi, Diego; Sighinolfi, Gianluca; Degidi, Marco

2015-06-01

The electric resistance welding procedure is used to join a titanium bar with specific implant abutments in order to produce a framework directly in the oral cavity of the patient. This investigation studied the effects of the welding process on microstructure and hardness properties of commercially pure (CP2 and CP4) Ti components. Different welding powers and cooling procedures were applied to bars and abutments, normally used to produce the framework, in order to simulate the clinical intraoral welding procedure. The analyses highlighted that the joining process did not induce appreciable changes in the geometry of the abutments. However, because of unavoidable microstructural modifications in the welded zones, the hardness decreased to values lower than those of the unwelded CP2 and CP4 Ti grades, irrespective of the welding environments and parameters. © IMechE 2015.

Evaluation of two platelet-rich plasma processing methods and two platelet-activation techniques for use in llamas and alpacas.

PubMed

Semevolos, Stacy A; Youngblood, Cori D; Grissom, Stephanie K; Gorman, M Elena; Larson, Maureen K

2016-11-01

OBJECTIVE To evaluate 2 processing methods (commercial kit vs conical tube centrifugation) for preparing platelet rich plasma (PRP) for use in llamas and alpacas. SAMPLES Blood samples (30 mL each) aseptically collected from 6 healthy llamas and 6 healthy alpacas. PROCEDURES PRP was prepared from blood samples by use of a commercial kit and by double-step conical tube centrifugation. A CBC was performed for blood and PRP samples. Platelets in PRP samples were activated by means of a freeze-thaw method with or without 23mM CaCl 2 , and concentrations of platelet-derived growth factor-BB and transforming growth factor-β 1 were measured. Values were compared between processing methods and camelid species. RESULTS Blood CBC values for llamas and alpacas were similar. The commercial kit yielded a significantly greater degree of platelet enrichment (mean increase, 8.5 fold vs 2.8 fold) and WBC enrichment (mean increase, 3.7 fold vs 1.9 fold) than did conical tube centrifugation. Llamas had a significantly greater degree of platelet enrichment than alpacas by either processing method. No difference in WBC enrichment was identified between species. Concentrations of both growth factors were significantly greater in PRP samples obtained by use of the commercial kit versus those obtained by conical tube centrifugation. CONCLUSIONS AND CLINICAL RELEVANCE For blood samples from camelids, the commercial kit yielded a PRP product with a higher platelet and WBC concentration than achieved by conical tube centrifugation. Optimal PRP platelet and WBC concentrations for various applications need to be determined for llamas and alpacas.

ISO 50001 for US Commercial Buildings - Current Status and Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Jingjing; Sheaffer, Paul

''ISO 50001: 2011 Energy management systems – Requirements with guidance for use'' is a voluntary International Standard which provides organizations a proven framework to manage energy and continuously improve their energy performance. Implementing ISO 50001 in the commercial building sector has its unique opportunities and challenges in comparison with the industrial sector. The energy footprint of a portfolio of commercial buildings can be just as significant as a large industrial facility in comparison. There are many energy-saving opportunities in commercial buildings that can be addressed without capital investments, and the perceived risks for making energy improvements can be lower thanmore » in the industrial sector. In addition, the energy-consuming systems in commercial buildings are limited in types and have many similarities across buildings, which makes it much easier to standardize many ISO 50001 required processes, 5 procedures and documents to simplify implementation. There are also some sector-unique challenges, such as less familiar with ISO systems and the certification process. Another challenge arises from the complexity in some buildings’ ownership, tenancy, and O&M responsibilities. This whitepaper discusses these opportunities and issues in detail. The paper also recommends the characteristics of organizations in the commercial building sector that can benefit the most from adopting the ISO 50001 standard – namely the “suitable market”. Eight segments (education, food sales, retail, inpatient health care, hospitality, office buildings, laboratories and data centers) within the commercial building sector are highlighted.« less

Estimating Commercial Truck VMT of Interstate Motor Carriers: Data Evaluation

DOT National Transportation Integrated Search

1989-11-01

The objectives of this study were to document and evaluate existing data sources and procedures that estimate the VMT (vehicle miles traveled) of commercial vehicles operating in interstate commerce; to recommend and develop the best procedures that ...

Multiattribute Decision Modeling Techniques: A Comparative Analysis

DTIC Science & Technology

1988-08-01

Analytic Hierarchy Process ( AHP ). It is structurally similar to SMART, but elicitation methods are different and there are several algorithms for...reconciliation of inconsistent judgments and for consistency checks that are not available in any of the utility procedures. The AHP has been applied...of commercially available software packages that implement the AHP algorithms. Elicitation Methods. The AHP builds heavily on value trees, which

16 CFR 1.4 - Public disclosure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Public disclosure. 1.4 Section 1.4 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Industry Guidance Advisory Opinions § 1.4 Public disclosure. Written advice rendered pursuant to...

16 CFR 1702.2 - Procedural requirements and recommendations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Procedural requirements and recommendations. 1702.2 Section 1702.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS...

16 CFR 1702.2 - Procedural requirements and recommendations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Procedural requirements and recommendations. 1702.2 Section 1702.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS...

Going Paperless

NASA Technical Reports Server (NTRS)

1999-01-01

Sentel Corporation has commercialized NASA's Electronic Portable Information Collection (EPIC) System, which stemmed from a NASA Kennedy Space Center SBIR contract. NASA and Sentel designed, built, and tested work authorization procedures used as a paperless procedures system for Space Shuttle and International Space Station payload processing operations. EPIC is now being applied to various markets including; airplane maintenance, aerospace system data management, shipbuilding industries, shipping industries, law enforcement agencies, and public utilities. KSC is planning a pilot program to use EPIC at the Hypergol Maintenance Facility. In addition, Ames Research Center and KSC are working together to apply EPIC to the area of wireless communication.

The current status of orphan drug development in Europe and the US.

PubMed

Hall, Anthony K; Carlson, Marilyn R

2014-02-01

Orphan drug legislation has been introduced in a number of countries in order to stimulate the development of treatments for rare diseases by introducing commercial incentives for companies wishing to undertake that development. In order to navigate the maze of regulatory regulations and procedures so that companies can make proper use of the orphan drug incentives, specialist knowledge is required. This article will review the current status of orphan drug development in the EU and the US, explain the incentives and procedures, and touch on the role of patient organisations in the process.

Effect of residual ascorbate on determination of nitrite in commercial cured meat products.

PubMed

Fox, J B; Doerr, R C; Gates, R

1984-01-01

Residual ascorbate in cured meat slurries results in different amounts of pigment being produced from different Griess reagent combinations. The phenomenon was used to study residual ascorbate in commercial cured meat products which had a variety of textures, acidities, moisture and meat content, fat, homogeneity, initial nitrite, and processing conditions. Diluting and heating the samples according to the AOAC procedure did not completely eliminate the ascorbate interference, but making the sample alkaline did. Determining nitrite separately in supernate and precipitate from the first dilution showed the effect of heating to be the elimination of interferences and solubilization or extraction of nitrite from the precipitate.

16 CFR 1501.5 - Enforcement procedure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Enforcement procedure. 1501.5 Section 1501.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS METHOD FOR IDENTIFYING TOYS AND OTHER ARTICLES INTENDED FOR USE BY CHILDREN UNDER 3 YEARS OF AGE WHICH...

16 CFR 1.1 - Policy.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Policy. 1.1 Section 1.1 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Industry Guidance Advisory Opinions § 1.1 Policy. (a) Any person, partnership, or corporation may request advice...

16 CFR 1209.7 - Test procedures for smoldering combustion.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Test procedures for smoldering combustion. 1209.7 Section 1209.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY... for smoldering combustion. This section provides the test method for determining smoldering combustion...

16 CFR 1209.7 - Test procedures for smoldering combustion.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test procedures for smoldering combustion. 1209.7 Section 1209.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY... for smoldering combustion. This section provides the test method for determining smoldering combustion...

16 CFR 1209.7 - Test procedures for smoldering combustion.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Test procedures for smoldering combustion. 1209.7 Section 1209.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY... for smoldering combustion. This section provides the test method for determining smoldering combustion...

16 CFR 1209.7 - Test procedures for smoldering combustion.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Test procedures for smoldering combustion. 1209.7 Section 1209.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY... for smoldering combustion. This section provides the test method for determining smoldering combustion...

16 CFR 1.71 - Administration.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Administration. 1.71 Section 1.71 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Administration of the Fair Credit Reporting Act § 1.71 Administration. The general administration of the Fair...

16 CFR 1.71 - Administration.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Administration. 1.71 Section 1.71 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Administration of the Fair Credit Reporting Act § 1.71 Administration. The general administration of the Fair...

16 CFR 1.71 - Administration.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Administration. 1.71 Section 1.71 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Administration of the Fair Credit Reporting Act § 1.71 Administration. The general administration of the Fair...

16 CFR 1.71 - Administration.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Administration. 1.71 Section 1.71 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL PROCEDURES Administration of the Fair Credit Reporting Act § 1.71 Administration. The general administration of the Fair...

Chemorheology of highly filled thermosets: Effects of fillers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Halley, P.J.

1996-12-31

Highly filled thermosets are utilised in the manufacture of many high value added products in the aerospace, communication, computer and automobile industries. A fundamental understanding of the processing of these materials has, however, been hindered by the inherent complexities of the flow and cure properties of these composite thermoset materials. A chemorheological (gel point and chemoviscosity) testing procedure is described here that uses dynamic multiwave tests on a modified Rheometrics RDSII system, using a filled epoxy moulding compound (EMC). Data from this testing procedure has been combined with physical property and kinetic data to produce realistic simulation results using flowmore » simulation software (TSET; MOLDFLOW Pty Ltd). This chemorheological testing procedure has now been successfully implemented commercially by MOLDFLOW Pty Ltd.« less

Improved Cryopreservation of Human Umbilical Vein Endothelial Cells: A Systematic Approach

NASA Astrophysics Data System (ADS)

Sultani, A. Billal; Marquez-Curtis, Leah A.; Elliott, Janet A. W.; McGann, Locksley E.

2016-10-01

Cryopreservation of human umbilical vein endothelial cells (HUVECs) facilitated their commercial availability for use in vascular biology, tissue engineering and drug delivery research; however, the key variables in HUVEC cryopreservation have not been comprehensively studied. HUVECs are typically cryopreserved by cooling at 1 °C/min in the presence of 10% dimethyl sulfoxide (DMSO). We applied interrupted slow cooling (graded freezing) and interrupted rapid cooling with a hold time (two-step freezing) to identify where in the cooling process cryoinjury to HUVECs occurs. We found that linear cooling at 1 °C/min resulted in higher membrane integrities than linear cooling at 0.2 °C/min or nonlinear two-step freezing. DMSO addition procedures and compositions were also investigated. By combining hydroxyethyl starch with DMSO, HUVEC viability after cryopreservation was improved compared to measured viabilities of commercially available cryopreserved HUVECs and viabilities for HUVEC cryopreservation studies reported in the literature. Furthermore, HUVECs cryopreserved using our improved procedure showed high tube forming capability in a post-thaw angiogenesis assay, a standard indicator of endothelial cell function. As well as presenting superior cryopreservation procedures for HUVECs, the methods developed here can serve as a model to optimize the cryopreservation of other cells.

Macroergonomic study of food sector company distribution centres.

PubMed

García Acosta, Gabriel; Lange Morales, Karen

2008-07-01

This study focussed on the work system design to be used by a Colombian food sector company for distributing products. It considered the concept of participative ergonomics, where people from the commercial, logistics, operation, occupational health areas worked in conjunction with the industrial designers, ergonomists who methodologically led the project. As a whole, the project was conceived as having five phases: outline, diagnosis, modelling the process, scalability, instrumentation. The results of the project translate into procedures for selecting, projecting a new distribution centre, the operational process model, a description of ergonomic systems that will enable specific work stations to be designed, the procedure for adapting existing warehouses. Strategically, this work helped optimise the company's processes and ensure that knowledge would be transferred within it. In turn, it became a primary prevention strategy in the field of health, aimed at reducing occupational risks, improving the quality of life at work.

16 CFR 1501.4 - Size requirements and test procedure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Size requirements and test procedure. 1501.4 Section 1501.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT.... The metric approximations are included only for convenience.) (b)(1) Place the article, without...

16 CFR 2.32 - Agreement.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Agreement. 2.32 Section 2.32 Commercial... Consent Order Procedure § 2.32 Agreement. Every agreement in settlement of a Commission complaint shall... of findings of fact and conclusions of law. Every agreement also shall waive further procedural steps...

16 CFR 2.32 - Agreement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Agreement. 2.32 Section 2.32 Commercial... Consent Order Procedure § 2.32 Agreement. Every agreement in settlement of a Commission complaint shall... of findings of fact and conclusions of law. Every agreement also shall waive further procedural steps...

16 CFR 2.32 - Agreement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Agreement. 2.32 Section 2.32 Commercial... Consent Order Procedure § 2.32 Agreement. Every agreement in settlement of a Commission complaint shall... of findings of fact and conclusions of law. Every agreement also shall waive further procedural steps...

16 CFR 2.32 - Agreement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Agreement. 2.32 Section 2.32 Commercial... Consent Order Procedure § 2.32 Agreement. Every agreement in settlement of a Commission complaint shall... of findings of fact and conclusions of law. Every agreement also shall waive further procedural steps...

16 CFR 2.32 - Agreement.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Agreement. 2.32 Section 2.32 Commercial... Consent Order Procedure § 2.32 Agreement. Every agreement in settlement of a Commission complaint shall... of findings of fact and conclusions of law. Every agreement also shall waive further procedural steps...

16 CFR 1510.4 - Test procedure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Test procedure. 1510.4 Section 1510.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS... plane surface. Under its own weight and in a non-compressed state apply any portion of the test sample...

16 CFR § 1702.2 - Procedural requirements and recommendations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Procedural requirements and recommendations. § 1702.2 Section § 1702.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT...

Pricing commodity outpatient procedures assessing the impact.

PubMed

Cleverley, William O

2015-10-01

Hospitals should carefully consider all relevant factors before choosing to lower prices and payments for certain outpatient commodity services in an effort to remain competitive in their market. Key steps to take in the evaluation process include: Determining current profitability. Assessing profitability by payer class. Understanding overall cost positions. Assessing the relative payment terms of current commercial contracts. Determining the net revenue effect of proposed changes.

A Process for Capturing the Art of Systems Engineering

NASA Technical Reports Server (NTRS)

Owens, Clark V., III; Sekeres, Carrie; Roumie, Yasmeen

2016-01-01

There is both an art and a science to systems engineering. The science of systems engineering is effectively captured in processes and procedures, but the art is much more elusive. We propose that there is six step process that can be applied to any systems engineering organization to create an environment from which the "art" of that organization can be captured, be allowed to evolve collaboratively and be shared with all members of the organization. This paper details this process as it was applied to NASA Launch Services Program (LSP) Integration Engineering Branch during a pilot program of Confluence, a Commercial Off The Shelf (COTS) wiki tool.

16 CFR 1014.3 - Procedures for requests pertaining to individual records.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Procedures for requests pertaining to individual records. 1014.3 Section 1014.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL... individual records. (a) Any individual may request the Commission to inform him or her whether a particular...

78 FR 20832 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-08

... ``leak significantly'' to mean the visible emergence of water from parts of the showerhead other than the... Procedures for Showerheads, Faucets, Water Closets, Urinals, and Commercial Prerinse Spray Valves AGENCY... notice of proposed rulemaking related to DOE test procedures for showerheads, faucets, water closets...

36 CFR 28.13 - Variance, commercial and industrial application procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Variance, commercial and industrial application procedures. 28.13 Section 28.13 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR FIRE ISLAND NATIONAL SEASHORE: ZONING STANDARDS Federal Standards and...

36 CFR 28.13 - Variance, commercial and industrial application procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Variance, commercial and industrial application procedures. 28.13 Section 28.13 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR FIRE ISLAND NATIONAL SEASHORE: ZONING STANDARDS Federal Standards and...

32 CFR 861.5 - DOD Commercial Airlift Review Board procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AIRCRAFT DEPARTMENT OF DEFENSE COMMERCIAL AIR TRANSPORTATION QUALITY AND SAFETY REVIEW PROGRAM § 861.5 DOD... procedures apply to air carriers seeking to provide or already providing air transportation services to DOD... provide air transportation service to DOD; the review and approval or disapproval of air carriers in the...

78 FR 64295 - Energy Conservation Program: Test Procedure for Commercial Refrigeration Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-28

... amended under this section shall be reasonably designed to produce test results which measure energy... as members of the Working Group, in addition to two members from ASRAC, and one DOE representative... Energy Conservation Program: Test Procedure for Commercial Refrigeration Equipment; Proposed Rule #0;#0...

77 FR 31742 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-30

.... Test Procedure for Commercial Prerinse Spray Valves 4. Design Requirements for Showerheads 5... procedures prescribed or amended under this section shall be reasonably designed to produce test results...] American Society for Testing and Materials [ASTM] Standard F2324, entitled `Standard Test Method for Pre...

Analyzing the test process using structural coverage

NASA Technical Reports Server (NTRS)

Ramsey, James; Basili, Victor R.

1985-01-01

A large, commercially developed FORTRAN program was modified to produce structural coverage metrics. The modified program was executed on a set of functionally generated acceptance tests and a large sample of operational usage cases. The resulting structural coverage metrics are combined with fault and error data to evaluate structural coverage. It was shown that in the software environment the functionally generated tests seem to be a good approximation of operational use. The relative proportions of the exercised statement subclasses change as the structural coverage of the program increases. A method was also proposed for evaluating if two sets of input data exercise a program in a similar manner. Evidence was provided that implies that in this environment, faults revealed in a procedure are independent of the number of times the procedure is executed and that it may be reasonable to use procedure coverage in software models that use statement coverage. Finally, the evidence suggests that it may be possible to use structural coverage to aid in the management of the acceptance test processed.

Forming Limit Diagram of Titanium and Stainless Steel Alloys to Study the Formability of Hydro-Mechanical Deep Drawing Parts

NASA Astrophysics Data System (ADS)

Shirizly, A.

2005-08-01

The increase demand for stronger, lighter and economic sheet metal products, make the Hydromecanical deep drawing process lately more and more popular. The Hydromecanical process is used in almost all types of sheet metal parts from home appliances and kitchenware to automotive and aviation industries. Therefore, many common materials were tested and characterized by their ability to sustain large strains via the well known Forming Limit Diagram (FLD). The aim of this work is to examine the forming capability if the Hydromecanical process in production of hemisphere parts made of materials commonly used in the aviation and aerospace industries. Experimental procedures were carried out to assess their ductility through FLD and the Forming Limit Carve (FLC).Two type of material sheets were tested herewith for demonstrating the procedure: commercial pure titanium and stainless steel 316L. A numerical simulation of the Hydromecanical process was examined and compared to self made Hydromecanical deep drawing of hemispherical parts.

Patient Transport via Commercial Airlines

PubMed Central

Macnab, Andrew John

1992-01-01

Because the frequency of patient transport from one hospital to another is increasing and the popularity of air travel continues to rise, physicians should be aware of the procedures for patient transport by commercial airlines. Major airlines in Canada have experienced personnel and established procedures that facilitate the transportation of patients with special medical needs. By working with the airline medical health officers and using up-to-date equipment, physicians can achieve safe, cost-effective transport of appropriate patients via commercial aircraft. PMID:21221401

16 CFR § 1014.3 - Procedures for requests pertaining to individual records.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Procedures for requests pertaining to individual records. § 1014.3 Section § 1014.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... pertaining to individual records. (a) Any individual may request the Commission to inform him or her whether...

76 FR 68328 - Commercial Driver's License Information System State Procedures Manual, Release 5.2.0

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... mandating CDLIS and discusses types of CDLIS users. This Manual also includes descriptions, excerpted from... Manual, Release 5.2.0 AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Final...) Commercial Driver's License Information System (CDLIS) State Procedures Manual (the Manual) (Release 5.2.0...

A continuous process for the development of Kodak Aerochrome Infrared Film 2443 as a negative

NASA Astrophysics Data System (ADS)

Klimes, D.; Ross, D. I.

1993-02-01

A process for the continuous dry-to-dry development of Kodak Aerochrome Infrared Film 2443 as a negative (CIR-neg) is described. The process is well suited for production processing of long film lengths. Chemicals from three commercial film processes are used with modifications. Sensitometric procedures are recommended for the monitoring of processing quality control. Sensitometric data and operational aerial exposures indicate that films developed in this process have approximately the same effective aerial film speed as films processed in the reversal process recommended by the manufacturer (Kodak EA-5). The CIR-neg process is useful when aerial photography is acquired for resources management applications which require print reproductions. Originals can be readily reproduced using conventional production equipment (electronic dodging) in black and white or color (color compensation).

Temporal trend in the use of hysteroscopic vs laparoscopic sterilization and the characteristics of commercially insured and Medicaid-insured females in the US who have had the procedures

PubMed Central

Carney, Patricia I; Lin, Jay; Xia, Fang; Law, Amy

2016-01-01

Purpose Limited research has examined the factors associated with female permanent contraception procedures. This study evaluated the temporal trend in the use of hysteroscopic sterilization (HS) vs laparoscopic sterilization (LS) and characteristics of commercially insured and Medicaid-insured women in the US who have had the procedures. Methods Women aged 15–49 years with claims for HS and LS procedures were identified from two MarketScan databases, one consisting of commercial claims and the other Medicaid claims, during the time period of January 1, 2003 to December 31, 2012 and January 1, 2006 to December 31, 2011, respectively. Proportions and characteristics of women who underwent HS or LS procedures were determined. Multivariable logistic regressions were used to identify characteristics associated with the use of HS vs LS. Results Commercially insured women who had HS (n=32,012) vs LS (n=64,725) were slightly older (37.2 years vs 36.4 years, respectively, P<0.001) but had similar Charlson Comorbidity Index scores. Among commercially insured women, those who had a sterilization procedure during 2008–2012 were more likely to undergo HS (odds ratio: 7.1, P<0.001) than those who had a sterilization procedure during 2003–2007. Medicaid-insured women who had HS (n=2,001) were also slightly older than women who had LS (n=12,523; 30.1 years vs 28.8 years, respectively, P<0.001) but had a higher mean Charlson Comorbidity Index score (0.32 vs 0.25, respectively, P<0.001). Among Medicaid-insured women, the likelihood of having HS vs LS increased 3.3-fold (P<0.001) in years 2009–2011 compared to years 2006–2008. Among both populations, older age, obesity, and the use of oral contraceptives within the previous 12 months were associated with having HS vs LS. Conclusion Among both commercially insured and Medicaid-insured women, the likelihood of having HS vs LS increased over time. PMID:27257393

Development of NRC inspection procedure 38703: Commercial-grade dedication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Potapovs, U.; Pettis, R.L. Jr.

1994-12-31

The purpose of this paper is to present an overview of the recently completed U.S. Nuclear Regulatory Commission (NRC) inspection procedure 38703, {open_quotes}Commercial Grade Dedication,{close_quotes} which was issued on November 8, 1993. This procedure embodies the information gained from the NRC`s inspections and assessments of licensee procurement practices, a public workshop, industry feedback and public comments, and the NRC`s perspective of the industry`s response to the Nuclear Management and Resource Council (NUMARC) procurement initiatives.

48 CFR 44.400 - Scope of subpart.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SUBCONTRACTING POLICIES AND PROCEDURES Subcontracts for Commercial Items and Commercial Components 44.400 Scope... required to apply to any subcontractors that are furnishing commercial items or commercial components in accordance with Section 8002(b)(2) of Public Law 103-355 and Section 826 of Public Law 110-181 (10 U.S.C...

48 CFR 12.502 - Procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ACQUISITION OF COMMERCIAL ITEMS Applicability of Certain Laws to the Acquisition of Commercial Items and..., Subcontracts for Commercial Items and Commercial Components, reflect the applicability of the laws listed in 12... clause for each of the laws listed in 12.503 has been revised in the appropriate part to reflect its...

SU-D-209-03: Radiation Dose Reduction Using Real-Time Image Processing in Interventional Radiology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kanal, K; Moirano, J; Zamora, D

Purpose: To characterize changes in radiation dose after introducing a new real-time image processing technology in interventional radiology systems. Methods: Interventional radiology (IR) procedures are increasingly complex, at times requiring substantial time and radiation dose. The risk of inducing tissue reactions as well as long-term stochastic effects such as radiation-induced cancer is not trivial. To reduce this risk, IR systems are increasingly equipped with dose reduction technologies.Recently, ClarityIQ (Philips Healthcare) technology was installed in our existing neuroradiology IR (NIR) and vascular IR (VIR) suites respectively. ClarityIQ includes real-time image processing that reduces noise/artifacts, enhances images, and sharpens edges while alsomore » reducing radiation dose rates. We reviewed 412 NIR (175 pre- and 237 post-ClarityIQ) procedures and 329 VIR (156 preand 173 post-ClarityIQ) procedures performed at our institution pre- and post-ClarityIQ implementation. NIR procedures were primarily classified as interventional or diagnostic. VIR procedures included drain port, drain placement, tube change, mesenteric, and implanted venous procedures. Air Kerma (AK in units of mGy) was documented for all the cases using a commercial radiation exposure management system. Results: When considering all NIR procedures, median AK decreased from 1194 mGy to 561 mGy. When considering all VIR procedures, median AK decreased from 49 to 14 mGy. Both NIR and VIR exhibited a decrease in AK exceeding 50% after ClarityIQ implementation, a statistically significant (p<0.05) difference. Of the 5 most common VIR procedures, all median AK values decreased, but significance (p<0.05) was only reached in venous access (N=53), angio mesenteric (N=41), and drain placement procedures (N=31). Conclusion: ClarityIQ can reduce dose significantly for both NIR and VIR procedures. Image quality was not assessed in conjunction with the dose reduction.« less

NASA Technology Applications Team: Commercial applications of aerospace technology

NASA Technical Reports Server (NTRS)

1994-01-01

The Research Triangle Institute (RTI) Team has maintained its focus on helping NASA establish partnerships with U.S. industry for dual use development and technology commercialization. Our emphasis has been on outcomes, such as licenses, industry partnerships and commercialization of technologies, that are important to NASA in its mission of contributing to the improved competitive position of U.S. industry. The RTI Team has been successful in the development of NASA/industry partnerships and commercialization of NASA technologies. RTI ongoing commitment to quality and customer responsiveness has driven our staff to continuously improve our technology transfer methodologies to meet NASA's requirements. For example, RTI has emphasized the following areas: (1) Methodology For Technology Assessment and Marketing: RTI has developed and implemented effective processes for assessing the commercial potential of NASA technologies. These processes resulted from an RTI study of best practices, hands-on experience, and extensive interaction with the NASA Field Centers to adapt to their specific needs. (2) Effective Marketing Strategies: RTI surveyed industry technology managers to determine effective marketing tools and strategies. The Technology Opportunity Announcement format and content were developed as a result of this industry input. For technologies with a dynamic visual impact, RTI has developed a stand-alone demonstration diskette that was successful in developing industry interest in licensing the technology. And (3) Responsiveness to NASA Requirements: RTI listened to our customer (NASA) and designed our processes to conform with the internal procedures and resources at each NASA Field Center and the direction provided by NASA's Agenda for Change. This report covers the activities of the Research Triangle Institute Technology Applications Team for the period 1 October 1993 through 31 December 1994.

Fenestration system energy performance research, implementation, and international harmonization

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGowan, Raymond F

The research conducted by the NFRC and its contractors adds significantly to the understanding of several areas of investigation. NFRC enables manufacturers to rate fenestration energy performance to comply with building energy codes, participate in ENERGY STAR, and compete fairly. NFRC continuously seeks to improve its ratings and also seeks to simplify the rating process. Several research projects investigated rating improvement potential such as • Complex Product VT Rating Research • Window 6 and Therm 6 Validation Research Project • Complex Product VT Rating Research Conclusions from these research projects led to important changes and increased confidence in the existingmore » NFRC rating process. Conclusions from the Window 6/Therm 6 project will enable window manufacturers to rate an expanded array of products and improve existing ratings. Some research lead to an improved new rating method called the Component Modeling Approach. A primary goal of the CMA was a simplification of the commercial energy rating process to increase participation and make the commercial industry more competitive and code compliant. The project below contributed towards CMA development: • Component Modeling Approach Condensation Resistance Research NFRC continues to implement the Component Modeling Approach program. The program includes the CMA software tool, CMAST, and several procedural documents to govern the certification process. This significant accomplishment was a response the commercial fenestration industry’s need for a simplification of the present NFRC energy rating method (named site built). To date, most commercial fenestration is self-rated by a variety of techniques. The CMA enables commercial fenestration manufacturers to rate according to the NFRC 100/200 as most commercial energy codes require. International Harmonization NFRC achieved significant international harmonization success by continuing its licensing agreements with the Australian Fenestration Rating Council and the Association of Architectural Aluminum Manufacturers of South Africa (AAAMSA) to produce NFRC certified product ratings in their respective nations. NFRC worked in several other nations to introduce the NFRC ratings system: • India • China • Japan • Canada • Thailand • South Africa • Brazil • Korea NFRC attended or hosted several meetings in each of these nations establishing academic, commercial, industrial, and governmental contacts. NFRC presented the NFRC process and then necessary infrastructure steps necessary to achieve harmonization with the NFRC labeling system. NFRC looks forward to continued work toward harmonization in these nations and potentially others.« less

16 CFR 1702.2 - Procedural requirements and recommendations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Procedural requirements and recommendations...; PETITION PROCEDURES AND REQUIREMENTS § 1702.2 Procedural requirements and recommendations. (a) Requirements... recommendations. The following are procedural recommendations to help the Commission in its consideration of...

16 CFR 1702.2 - Procedural requirements and recommendations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Procedural requirements and recommendations...; PETITION PROCEDURES AND REQUIREMENTS § 1702.2 Procedural requirements and recommendations. (a) Requirements... recommendations. The following are procedural recommendations to help the Commission in its consideration of...

Immobilization of microalgae cells in alginate facilitates isolation of DNA and RNA.

PubMed

Lopez, Blanca R; Hernandez, Juan-Pablo; Bashan, Yoav; de-Bashan, Luz E

2017-04-01

Isolation of nucleic acids from Chlorella is difficult, given the chemically complex nature of their cell walls and variable production of metabolites. Immobilization of microalgae in polymers adds additional difficulty. Here, we modified, amended, and standardized methods for isolation of nucleic acids and compared the yield of DNA and RNA from free-living and encapsulated microalgae C. sorokiniana. Isolation of nucleic acids from immobilized cells required two steps in dissolving the alginate matrix, releasing the cells, and mechanical disruption with glass beads. For DNA extraction, we used modified versions of a commercial kit along with the hexadecyltrimethylammonium bromide (CTAB) method. For RNA extraction, we used the commercial TRI reagent procedure and the CTAB-dithiotreitol method. Quantity and quality of nucleic acids in extracts varied with growth conditions, isolation procedures, and time of incubation of the original culture. There were consistently higher amounts of DNA and RNA in extracts from immobilized cells. Quantitatively, the modified procedure with the commercial Promega kit was the most reliable procedure for isolating DNA and a modified commercial TRI reagent procedure was the choice for isolating RNA. All four procedures eliminated proteins efficiently and had low levels of contamination from residual polysaccharides from the matrices and/or metabolites naturally produced by the microalgae. All DNA extracts under both growth conditions, time of incubation, and two isolation methods successfully amplified the 18S ribosomal RNA by PCR and quantitative reverse transcription (RT-qPCR). Copyright © 2017 Elsevier B.V. All rights reserved.

A survey of the barriers associated with academic-based cancer research commercialization.

PubMed

Vanderford, Nathan L; Weiss, L Todd; Weiss, Heidi L

2013-01-01

Commercialization within the academic setting is associated with many challenges and barriers. Previous studies investigating these challenges/barriers have, in general, broadly focused on multiple disciplines and, oftentimes, several institutions simultaneously. The goal of the study presented here was to analyze a range of barriers that may be broadly associated with commercializing academic-based cancer research. This goal was addressed via a study of the barriers associated with cancer research commercialization at the University of Kentucky (UK). To this end, a research instrument in the form of an electronic survey was developed. General demographic information was collected on study participants and two research questions were addressed: 1) What are the general barriers inhibiting cancer research commercialization at UK? and 2) Would mitigation of the barriers potentially enhance faculty engagement in commercialization activities? Descriptive and statistical analysis of the data reveal that multiple barriers likely inhibit cancer research commercialization at UK with expense, time, infrastructure, and lack of industry partnerships being among the most commonly cited factors. The potential alleviation of these factors in addition to revised University policies/procedures, risk mitigation, more emphasis on commercialization by academia research field, and increased information on how to commercialize significantly correlated with the potential for increased commercialization activity. Furthermore, multivariate logistic regression modeling demonstrated that research commercialization would incrementally increase as barriers to the process are removed and that PhD-holding respondents and respondents in commercialization-supportive research fields would be more likely to commercialize their research upon barrier removal. Overall, as with other disciplines, these data suggest that for innovations derived from academic cancer-research to move more effectively and efficiently into the marketplace, university administrators and external agents, such as policymakers, need to address what are well-documented and defined issues.

A Survey of the Barriers Associated with Academic-based Cancer Research Commercialization

PubMed Central

Vanderford, Nathan L.; Weiss, L. Todd; Weiss, Heidi L.

2013-01-01

Commercialization within the academic setting is associated with many challenges and barriers. Previous studies investigating these challenges/barriers have, in general, broadly focused on multiple disciplines and, oftentimes, several institutions simultaneously. The goal of the study presented here was to analyze a range of barriers that may be broadly associated with commercializing academic-based cancer research. This goal was addressed via a study of the barriers associated with cancer research commercialization at the University of Kentucky (UK). To this end, a research instrument in the form of an electronic survey was developed. General demographic information was collected on study participants and two research questions were addressed: 1) What are the general barriers inhibiting cancer research commercialization at UK? and 2) Would mitigation of the barriers potentially enhance faculty engagement in commercialization activities? Descriptive and statistical analysis of the data reveal that multiple barriers likely inhibit cancer research commercialization at UK with expense, time, infrastructure, and lack of industry partnerships being among the most commonly cited factors. The potential alleviation of these factors in addition to revised University policies/procedures, risk mitigation, more emphasis on commercialization by academia research field, and increased information on how to commercialize significantly correlated with the potential for increased commercialization activity. Furthermore, multivariate logistic regression modeling demonstrated that research commercialization would incrementally increase as barriers to the process are removed and that PhD-holding respondents and respondents in commercialization-supportive research fields would be more likely to commercialize their research upon barrier removal. Overall, as with other disciplines, these data suggest that for innovations derived from academic cancer-research to move more effectively and efficiently into the marketplace, university administrators and external agents, such as policymakers, need to address what are well-documented and defined issues. PMID:23991077

Why pilots are least likely to get good decision making precisely when they need it most

NASA Technical Reports Server (NTRS)

Maher, John W.

1991-01-01

Studies of commercial aircraft incidents and accidents indicate that, in flight conditions not covered by standard operating procedures, as well as when the environment is saturated with information or unmanaged stress, cognitive shortcuts dominate aircrews' decisionmaking processes. Multidisciplinary research on such situations with high-fidelity simulators becomes critically important, as do psychometric tools which examine vigilance, personality resiliency before stressful conditions, and decisional and interpersonal mind-sets.

Use of purple durum wheat to produce naturally functional fresh and dry pasta.

PubMed

Ficco, Donatella Bianca Maria; De Simone, Vanessa; De Leonardis, Anna Maria; Giovanniello, Valentina; Del Nobile, Matteo Alessandro; Padalino, Lucia; Lecce, Lucia; Borrelli, Grazia Maria; De Vita, Pasquale

2016-08-15

In this study, the effects of different milling procedures (roller-milling vs. stone-milling) and pasta processing (fresh vs. dried spaghetti), and cooking on the antioxidant components and sensory properties of purple durum wheat were investigated. Milling and pasta processing were performed using one purple and one conventional non-pigmented durum wheat genotypes, and the end-products were compared with commercial pasta. The results show that the stone milling process preserved more compounds with high health value (total fibre and carotenoids, and in the purple genotype, also anthocyanins) compared to roller-milling. The drying process significantly (p<0.05) reduced the content of anthocyanins (21.42 μg/g vs. 46.32 μg/g) and carotenoids (3.77 μg/g vs. 4.04 μg/g) with respect to the pasteurisation process involved in fresh pasta production. The sensory properties of pasta from the purple genotype did not significantly differ from commercial wholemeal pasta, and its in vitro glycemic index was even lower. Thus, it is possible to consider this genetic material as a good ingredient for the production of functional foods from cereals naturally rich in bioactive compounds. Copyright © 2016 Elsevier Ltd. All rights reserved.

48 CFR 413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2010 CFR

2010-10-01

... purchase card. 413.301 Section 413.301 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE....301 Governmentwide commercial purchase card. USDA policy and procedures on use of the Governmentwide commercial purchase card are established in Departmental Regulation Series 5000. ...

Eye dose to staff involved in interventional and procedural fluoroscopy

NASA Astrophysics Data System (ADS)

McLean, D.; Hadaya, D.; Tse, J.

2016-03-01

In 2011 the International Commission on Radiological Protection (ICRP) lowered the occupational eye dose limit from 150 to 20 mSv/yr [1]. While international jurisdictions are in a process of adopting these substantial changes, medical physicists at the clinical level have been advising medical colleagues on specific situations based on dose measurements. Commissioned and calibrated TLDs mounted in commercially available holders designed to simulate the measurement of Hp(3), were applied to staff involved in x-ray procedures for a one month period. During this period clinical procedure data was concurrently collected and subject to audit. The use or not of eye personal protective equipment (PPE) was noted for all staff. Audits were conducted in the cardiac catheterisation laboratory, the interventional angiography rooms and the procedural room where endoscopic retrograde cholangiopancreatography (ERCP) procedures are performed. Significant levels of occupational dose were recorded in the cardiac and interventional procedures, with maximum reading exceeding the new limit for some interventional radiologists. No significant eye doses were measured for staff performing ERCP procedures. One outcome of the studies was increased use of eye PPE for operators of interventional equipment with increased availability also to nursing staff, when standing in close proximity to the patient during procedures.

16 CFR Table 3 to Part 1512 - Minimum Acceptable Values for the Quantity A Defined in the Retroreflective Tire and Rim Test...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Minimum Acceptable Values for the Quantity A Defined in the Retroreflective Tire and Rim Test Procedure 3 Table 3 to Part 1512 Commercial Practices... Retroreflective Tire and Rim Test Procedure Observation angle (degrees) Entrance angle (degrees) Minimum...

78 FR 79685 - Decision and Order Granting a Waiver to Hussmann From the Department of Energy Commercial...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-31

... procedure for commercial refrigeration equipment because the equipment cannot operate at the specified..., which includes commercial refrigeration equipment, the focus of this notice.\\1\\ Part C specifically... for commercial refrigeration equipment. (42 U.S.C. 6314(a)(6)(C)) On December 8, 2006, DOE published a...

Transportation and General Traffic Management, Change 2

NASA Technical Reports Server (NTRS)

1979-01-01

This Handbook sets forth those transportation and general traffic management responsibilities, guidelines, and procedures governing the use of commercial and Government transportation for NASA. Transportation is an integral function of the logistic process, involving all activities incident to the movement of persons and things. The fundamental and continuous objectives of transportation are to control and diminish the time-distance of lines of communication by the most suitable means. The function of transportation is accomplished through, and encompasses all, the planning, direction, supervision, and execution of the technical, operational, and administrative tasks required to procure or furnish efficient and economical conveyance of cargo and personnel by all modes of commercial and Government transportation. This Handbook is applicable to NASA Headquarters and Field Installations.

A Discussion of Commercially Available Intra-ocular Telescopic Implants for Patients with Age-Related Macular Degeneration.

PubMed

Dunbar, Hannah M P; Dhawahir-Scala, Felipe E

2018-06-01

Age-related macular degeneration (AMD) is the leading cause of visual impairment in the western world, causing significant reduction in quality of life. Despite treatment advances, the burden of visual impairment caused by AMD continues to rise. In addition to traditional low vision rehabilitation and support, optical and electronic aids, and strategies to enhance the use of peripheral vision, implantable telescopic devices have been indicated as a surgical means of enhancing vision. Here we examine the literature on commercially available telescopic devices discussing their design, mode of action, surgical procedure and published outcomes on visual acuity, quality of life, surgical complication rates and cost effectiveness data where available.Funding Article processing charges were funded by VisionCare Inc.

Aluminum powder metallurgy processing

NASA Astrophysics Data System (ADS)

Flumerfelt, Joel Fredrick

In recent years, the aluminum powder industry has expanded into non-aerospace applications. However, the alumina and aluminum hydroxide in the surface oxide film on aluminum powder require high cost powder processing routes. A driving force for this research is to broaden the knowledge base about aluminum powder metallurgy to provide ideas for fabricating low cost aluminum powder components. The objective of this dissertation is to explore the hypothesis that there is a strong linkage between gas atomization processing conditions, as-atomized aluminum powder characteristics, and the consolidation methodology required to make components from aluminum powder. The hypothesis was tested with pure aluminum powders produced by commercial air atomization commercial inert gas atomization and gas atomization reaction synthesis (GARS). The commercial atomization methods are bench marks of current aluminum powder technology. The GARS process is a laboratory scale inert gas atomization facility. A benefit of using pure aluminum powders is an unambiguous interpretation of the results without considering the effects of alloy elements. A comparison of the GARS aluminum powders with the commercial aluminum powders showed the former to exhibit superior powder characteristics. The powders were compared in terms of size and shape, bulk chemistry, surface oxide chemistry and structure, and oxide film thickness. Minimum explosive concentration measurements assessed the dependence of explosibility hazard on surface area, oxide film thickness, and gas atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization oxidation of aluminum powder. An Al-Ti-Y GARS alloy exposed in ambient air at different temperatures revealed the effect of reactive alloy elements on post-atomization powder oxidation. The pure aluminum powders were consolidated by two different routes, a conventional consolidation process for fabricating aerospace components with aluminum powder and a proposed alternative. The consolidation procedures were compared by evaluating the consolidated microstructures and the corresponding mechanical properties. A low temperature solid state sintering experiment demonstrated that tap densified GARS aluminum powders can form sintering necks between contacting powder particles, unlike the total resistance to sintering of commercial air atomization aluminum powder.

A Procedure for Structural Weight Estimation of Single Stage to Orbit Launch Vehicles (Interim User's Manual)

NASA Technical Reports Server (NTRS)

Martinovic, Zoran N.; Cerro, Jeffrey A.

2002-01-01

This is an interim user's manual for current procedures used in the Vehicle Analysis Branch at NASA Langley Research Center, Hampton, Virginia, for launch vehicle structural subsystem weight estimation based on finite element modeling and structural analysis. The process is intended to complement traditional methods of conceptual and early preliminary structural design such as the application of empirical weight estimation or application of classical engineering design equations and criteria on one dimensional "line" models. Functions of two commercially available software codes are coupled together. Vehicle modeling and analysis are done using SDRC/I-DEAS, and structural sizing is performed with the Collier Research Corp. HyperSizer program.

Recommendations for field measurements of aircraft noise

NASA Technical Reports Server (NTRS)

Marsh, A. H.

1982-01-01

Specific recommendations for environmental test criteria, data acquisition procedures, and instrument performance requirements for measurement of noise levels produced by aircraft in flight are provided. Recommendations are also given for measurement of associated airplane and engine parameters and atmospheric conditions. Recommendations are based on capabilities which were available commercially in 1981; they are applicable to field tests of aircraft flying subsonically past microphones located near the surface of the ground either directly under or to the side of a flight path. Aircraft types covered by the recommendations include fixed-wing airplanes powered by turbojet or turbofan engines or by propellers. The recommended field-measurement procedures are consistent with assumed requirements for data processing and analysis.

48 CFR 1313.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2010 CFR

2010-10-01

... purchase card. 1313.301 Section 1313.301 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE....301 Governmentwide commercial purchase card. The Department's procedures for the use and control of the Governmentwide commercial purchase card are set forth in CAM 1313.301. ...

32 CFR 169a.18 - Administrative appeal procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false Administrative appeal procedures. 169a.18 Section 169a.18 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DEFENSE CONTRACTING COMMERCIAL ACTIVITIES PROGRAM PROCEDURES Procedures § 169a.18 Administrative appeal procedures. (a...

32 CFR 169a.18 - Administrative appeal procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false Administrative appeal procedures. 169a.18 Section 169a.18 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DEFENSE CONTRACTING COMMERCIAL ACTIVITIES PROGRAM PROCEDURES Procedures § 169a.18 Administrative appeal procedures. (a...

32 CFR 169a.18 - Administrative appeal procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Administrative appeal procedures. 169a.18 Section 169a.18 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DEFENSE CONTRACTING COMMERCIAL ACTIVITIES PROGRAM PROCEDURES Procedures § 169a.18 Administrative appeal procedures. (a...

Space processing of crystalline materials: A study of known methods of electrical characterization of semiconductors

NASA Technical Reports Server (NTRS)

Castle, J. G.

1976-01-01

A literature survey is presented covering nondestructive methods of electrical characterization of semiconductors. A synopsis of each technique deals with the applicability of the techniques to various device parameters and to potential in-flight use before, during, and after growth experiments on space flights. It is concluded that the very recent surge in the commercial production of large scale integrated circuitry and other semiconductor arrays requiring uniformity on the scale of a few microns, involves nondestructive test procedures which could well be useful to NASA for in-flight use in space processing.

Clinical laboratory billing: superfluous requirements without justification?

PubMed

Stadler, Stephen

2004-01-01

Congress occasionally passes new laws that affect how clinical laboratories handle test orders from physicians and, subsequently, process the billing for tests. Once a bill is signed into law, it is forwarded to administrative agencies, which draft regulations and administrative procedures, under which the intentions of Congress are carried out. In the case of laboratory test ordering and billing, the Centers for Medicare and Medicaid Services (CMS) has the greatest influence over how these regulations and procedures are defined. Unfortunately, in many cases, billing rules have been promulgated in ways that create the need for hospitals and commercial laboratories to expend huge sums of money to bill within the confines of the administrative rules; cause clinical laboratories to suffer from omissions and mistakes of other parties who are part of the patient care process but are not accountable for the billing information they provide to laboratories; and, frankly, in some respects, simply defy common sense.

Proposals for best-quality immunohistochemical staining of paraffin-embedded brain tissue slides in forensics.

PubMed

Trautz, Florian; Dreßler, Jan; Stassart, Ruth; Müller, Wolf; Ondruschka, Benjamin

2018-01-03

Immunohistochemistry (IHC) has become an integral part in forensic histopathology over the last decades. However, the underlying methods for IHC vary greatly depending on the institution, creating a lack of comparability. The aim of this study was to assess the optimal approach for different technical aspects of IHC, in order to improve and standardize this procedure. Therefore, qualitative results from manual and automatic IHC staining of brain samples were compared, as well as potential differences in suitability of common IHC glass slides. Further, possibilities of image digitalization and connected issues were investigated. In our study, automatic staining showed more consistent staining results, compared to manual staining procedures. Digitalization and digital post-processing facilitated direct analysis and analysis for reproducibility considerably. No differences were found for different commercially available microscopic glass slides regarding suitability of IHC brain researches, but a certain rate of tissue loss should be expected during the staining process.

48 CFR 2131.103 - Contracts with commercial organizations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Contracts with commercial organizations. 2131.103 Section 2131.103 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT... CONTRACT COST PRINCIPLES AND PROCEDURES Applicability 2131.103 Contracts with commercial organizations. The...

10 CFR Appendix D to Subpart T of... - Enforcement for Performance Standards; Compliance Determination Procedure for Certain Commercial...

Code of Federal Regulations, 2011 CFR

2011-01-01

... Determination Procedure for Certain Commercial Equipment D Appendix D to Subpart T of Part 431 Energy DEPARTMENT... EQUIPMENT Certification and Enforcement Pt. 431, Subpt. T, App. D Appendix D to Subpart T of Part 431... where EPS is the energy performance standard and t is a statistic based on a 97.5 percent, one-sided...

10 CFR 431.134 - Uniform test methods for the measurement of energy and water consumption of automatic commercial...

Code of Federal Regulations, 2013 CFR

2013-01-01

... water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy DEPARTMENT OF... Automatic Commercial Ice Makers Test Procedures § 431.134 Uniform test methods for the measurement of energy and water consumption of automatic commercial ice makers. (a) Scope. This section provides the test...

10 CFR 431.134 - Uniform test methods for the measurement of energy and water consumption of automatic commercial...

Code of Federal Regulations, 2014 CFR

2014-01-01

... water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy DEPARTMENT OF... Automatic Commercial Ice Makers Test Procedures § 431.134 Uniform test methods for the measurement of energy and water consumption of automatic commercial ice makers. (a) Scope. This section provides the test...

48 CFR 12.000 - Scope of part.

Code of Federal Regulations, 2010 CFR

2010-10-01

... (Public Law 103-355) by establishing acquisition policies more closely resembling those of the commercial... ACQUISITION OF COMMERCIAL ITEMS 12.000 Scope of part. This part prescribes policies and procedures unique to the acquisition of commercial items. It implements the Federal Government's preference for the...

Evaluation of four commercial biuret reagent kits of serum total protein by the American Association for Clinical Chemistry reference measurement procedure.

PubMed

He, Meilin; Zhang, Jie

2011-06-01

In China, the traceability of clinical chemistry methods is still immature. Therefore, it is necessary to establish a reference measurement procedure and evaluate commercial reagent kits using such established procedures. We reproduced the reference measurement procedure for serum total protein, as recommended by the American Association for Clinical Chemistry (AACC). We evaluated the performance by Clinical Laboratory Standard Institute (CLSI) guidelines EP15-A and EP6-A. Subsequently, four commercial reagent kits were evaluated by the reproduced reference procedure following CLSI guideline EP9-A2. The performance of the reproduced reference procedure was as follows: CVs ranged from 0.47% to 0.85% at medical decision levels (X(c)) of 45 g/L, 60 g/L and 80 g/L. Linearity was Y=1.0022X-0.2121 (r=0.9999), and recovery ranged from 100.2% to 102.4%. The External Quality Assessment Scheme for Reference Laboratories in Laboratory Medicine (RELA) was applied, and the result was within the limit of equivalence. The linear relationships of four commercial reagent kits, Merit Choice, KHB, Leadman, and Olympus, were, respectively: Y=0.9922X+0.5776 (r=0.9961); Y=0.9936X+0.4316 (r=0.9992); Y=0.9949X+0.9129 (r=0.9987) and Y=0.9923X+0.8876 (r=0.9989). KHB showed slight negative bias, and the mean±SD was -0.03±0.60 g/L. Merit Choice, Leadman, and Olympus all showed positive bias, and the mean±SDs were 0.02±0.63 g/L, 0.55±0.77 g/L and 0.34±0.71 g/L, respectively. The correlation and bias of four commercial reagent kits for serum total protein were found to be acceptable. Thus, these reagent kits can be used reliably in China.

The FAA's Approach to Quality Assurance in the Flight Safety Analysis of Launch and Reentry Vehicles

NASA Astrophysics Data System (ADS)

Murray, Daniel P.; Weil, Andre

2010-09-01

The U.S. Federal Aviation Administration(FAA) Office of Commercial Space Transportation’s safety mission is to ensure protection of the public, property, and the national security and foreign policy interests of the United States during commercial launch and reentry activities. As part of this mission, the FAA issues licenses to the operators of launch and reentry vehicles who successfully demonstrate compliance with FAA regulations. To meet these regulations, vehicle operators submit an application that contains, among other things, flight safety analyses of their proposed missions. In the process of evaluating these submitted analyses, the FAA often conducts its own independent analyses, using input data from the submitted license application. These analyses are conducted according to approved procedures using industry developed tools. To assist in achieving the highest levels of quality in these independent analyses, the FAA has developed a quality assurance program that consists of multiple levels of review. These reviews rely on the work of multiple teams, as well as additional, independently performed work of support contractors. This paper describes the FAA’s quality assurance process for flight safety analyses. Members of the commercial space industry may find that elements of this process can be easily applied to their own analyses, improving the quality of the material they submit to the FAA in their license applications.

Effectiveness of HVAC duct cleaning procedures in improving indoor air quality.

PubMed

Ahmad, I; Tansel, B; Mitrani, J D

2001-12-01

Indoor air quality has become one of the most serious environmental concerns as an average person spends about 22 hr indoors on a daily basis. The study reported in this article, was conducted to determine the effectiveness of three commercial HVAC (Heating Ventilation Air Conditioning) duct cleaning processes in reducing the level of airborne particulate matter and viable bioaerosols. The three HVAC sanitation processes were: (1) Contact method (use of conventional vacuum cleaning of interior duct surfaces); (2) Air sweep method (use of compressed air to dislodging dirt and debris); (3) Rotary brush method (insertion of a rotary brush into the ductwork to agitate and dislodge the debris). Effectiveness of these sanitation processes was evaluated in terms of airborne particulate and viable bioaerosol concentrations in residential homes. Eight identical homes were selected in the same neighborhood. Two homes were cleaned using each procedure and two were used as controls. It was found that both particle count readings and bioaerosol concentrations were higher when cleaning was being performed than before or after cleaning, which suggests that dirt, debris and other pollutants may become airborne as a result of disturbances caused by the cleaning processes. Particle count readings at 0.3 micron size were found to have increased due to cigarette smoking. Particle counts at 1.0 micron size were reduced due to HVAC duct cleaning. Post-level bioaerosol concentrations, taken two days after cleaning, were found to be lower than the pre-level concentrations suggesting that the cleaning procedures were effective to some extent. Homes cleaned with the Air Sweep procedure showed the highest degree of reduction in bioaerosol concentration among the three procedures investigated.

10 CFR 431.154 - Test procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Test procedures. 431.154 Section 431.154 Energy DEPARTMENT... EQUIPMENT Commercial Clothers Washers Test Procedures § 431.154 Test procedures. The test procedures for residential clothes washers in Appendix J1 to subpart B of part 430 of this title shall be used to test...

Improving oceanographic data delivery through pipeline processing in a Commercial Cloud Services environment: the Australian Integrated Marine Observing System

NASA Astrophysics Data System (ADS)

Besnard, Laurent; Blain, Peter; Mancini, Sebastien; Proctor, Roger

2017-04-01

The Integrated Marine Observing System (IMOS) is a national project funded by the Australian government established to deliver ocean observations to the marine and climate science community. Now in its 10th year its mission is to undertake systematic and sustained observations and to turn them into data, products and analyses that can be freely used and reused for broad societal benefits. As IMOS has matured as an observing system expectation on the system's availability and reliability has also increased and IMOS is now seen as delivering 'operational' information. In responding to this expectation, IMOS has relocated its services to the commercial cloud service Amazon Web Services. This has enabled IMOS to improve the system architecture, utilizing more advanced features like object storage (S3 - Simple Storage Service) and autoscaling features, and introducing new checking procedures in a pipeline approach. This has improved data availability and resilience while protecting against human errors in data handling and providing a more efficient ingestion process.

Optimisation of low temperature extraction of banana juice using commercial pectinase.

PubMed

Sagu, Sorel Tchewonpi; Nso, Emmanuel Jong; Karmakar, Sankha; De, Sirshendu

2014-05-15

The objective of this work was to develop a process with optimum conditions for banana juice. The procedure involves hydrolyzing the banana pulp by commercial pectinase followed by cloth filtration. Response surface methodology with Doehlert design was utilised to optimize the process parameters. The temperature of incubation (30-60 °C), time of reaction (20-120 min) and concentration of pectinase (0.01-0.05% v/w) were the independent variables and viscosity, clarity, alcohol insoluble solids (AIS), total polyphenol and protein concentration were the responses. Total soluble sugar, pH, conductivity, calcium, sodium and potassium concentration in the juice were also evaluated. The results showed reduction of AIS and viscosity with reaction time and pectinase concentration and reduction of polyphenol and protein concentration with temperature. Using numerical optimization, the optimum conditions for the enzymatic extraction of banana juice were estimated. Depectinization kinetics was also studied at optimum temperature and variation of kinetic constants with enzyme dose was evaluated. Copyright © 2013 Elsevier Ltd. All rights reserved.

Biofortification of folates in white wheat bread by selection of yeast strain and process.

PubMed

Hjortmo, Sofia; Patring, Johan; Jastrebova, Jelena; Andlid, Thomas

2008-09-30

We here demonstrate that folate content in yeast fermented food can be dramatically increased by using a proper (i) yeast strain and (ii) cultivation procedure for the selected strain prior to food fermentation. Folate levels were 3 to 5-fold higher in white wheat bread leavened with a Saccharomyces cerevisiae strain CBS7764, cultured in defined medium and harvested in the respiro-fermentative phase of growth prior to dough preparation (135-139 microg/100 dry matter), compared to white wheat bread leavened with commercial Baker's yeast (27-43 microg/100 g). The commercial Baker's yeast strain had been industrially produced, using a fed-batch process, thereafter compressed and stored in the refrigerator until bakings were initiated. This strategy is an attractive alternative to fortification of bread with synthetically produced folic acid. By using a high folate producing strain cultured a suitable way folate levels obtained were in accordance with folic acid content in fortified cereal products.

48 CFR 2413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Commercial Credit Card Program. [60 FR 46155, Sept. 5, 1995. Redesignated at 64 FR 46095, Aug. 23, 1999] ... purchase card. 2413.301 Section 2413.301 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND... Acquisition Methods 2413.301 Governmentwide commercial purchase card. (c) HUD's procedures concerning the use...

48 CFR 13.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the current GSA credit card contract. Agency procedures should not limit the use of the Governmentwide... purchase card. 13.301 Section 13.301 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... Governmentwide commercial purchase card. (a) Except as provided in 32.1108(b)(2), the Governmentwide commercial...

48 CFR 2413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Commercial Credit Card Program. [60 FR 46155, Sept. 5, 1995. Redesignated at 64 FR 46095, Aug. 23, 1999] ... purchase card. 2413.301 Section 2413.301 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND... Acquisition Methods 2413.301 Governmentwide commercial purchase card. (c) HUD's procedures concerning the use...

48 CFR 2413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Commercial Credit Card Program. [60 FR 46155, Sept. 5, 1995. Redesignated at 64 FR 46095, Aug. 23, 1999] ... purchase card. 2413.301 Section 2413.301 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND... Acquisition Methods 2413.301 Governmentwide commercial purchase card. (c) HUD's procedures concerning the use...

48 CFR 2413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Commercial Credit Card Program. [60 FR 46155, Sept. 5, 1995. Redesignated at 64 FR 46095, Aug. 23, 1999] ... purchase card. 2413.301 Section 2413.301 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND... Acquisition Methods 2413.301 Governmentwide commercial purchase card. (c) HUD's procedures concerning the use...

48 CFR 2413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Commercial Credit Card Program. [60 FR 46155, Sept. 5, 1995. Redesignated at 64 FR 46095, Aug. 23, 1999] ... purchase card. 2413.301 Section 2413.301 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND... Acquisition Methods 2413.301 Governmentwide commercial purchase card. (c) HUD's procedures concerning the use...

Comparison of Healthcare Costs Among Commercially Insured Women in the United States Who Underwent Hysteroscopic Sterilization Versus Laparoscopic Bilateral Tubal Ligation Sterilization.

PubMed

Carney, Patricia I; Yao, Jianying; Lin, Jay; Law, Amy

2017-05-01

This study evaluated healthcare costs of index procedures and during a 6-month follow-up of women who had hysteroscopic sterilization (HS) versus laparoscopic bilateral tubal ligation (LBTL). Women (18-49 years) with claims for HS and LBTL procedures were identified from the MarketScan commercial claims database (January 1, 2010, to December 31, 2012) and placed into separate cohorts. Demographics, characteristics, index procedure costs, and 6-month total healthcare costs and sterilization procedure-related costs were compared. Multivariable regression analyses were used to examine the impact of HS versus LBTL on costs. Among the study population, 12,031 had HS (mean age: 37.0 years) and 7286 had LBTL (mean age: 35.8 years). The majority (80.9%) who had HS underwent the procedure in a physician's office setting. Fewer women who had HS versus LBTL received the procedure in an inpatient setting (0.5% vs. 2.1%), an ambulatory surgical center setting (5.0% vs. 23.8%), or a hospital outpatient setting (13.4% vs. 71.9%). Mean total cost for the index sterilization procedure was lower for HS than for LBTL ($3964 vs. $5163, p < 0.0001). During the 6-month follow-up, total medical and prescription costs for all causes ($7093 vs. $7568, p < 0.0001) and sterilization procedure-related costs ($4971 vs. $5407, p < 0.0001) were lower for women who had HS versus LBTL. Multivariable regression results confirmed that costs were lower for women who had HS versus LBTL. Among commercially insured women in the United States, HS versus LBTL is associated with lower average costs for the index procedure and lower total healthcare and procedure-related costs during 6 months after the sterilization procedure.

48 CFR 208.7403 - Acquisition procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SYSTEM, DEPARTMENT OF DEFENSE ACQUISITION PLANNING REQUIRED SOURCES OF SUPPLIES AND SERVICES Enterprise Software Agreements 208.7403 Acquisition procedures. Follow the procedures at PGI 208.7403 when acquiring commercial software and related services. [71 FR 39005, July 11, 2006] ...

[Error prevention through management of complications in urology: standard operating procedures from commercial aviation as a model].

PubMed

Kranz, J; Sommer, K-J; Steffens, J

2014-05-01

Patient safety and risk/complication management rank among the current megatrends in modern medicine, which has undoubtedly become more complex. In time-critical, error-prone and difficult situations, which often occur repeatedly in everyday clinical practice, guidelines are inappropriate for acting rapidly and intelligently. With the establishment and consistent use of standard operating procedures like in commercial aviation, a possible strategic approach is available. These medical aids to decision-making - quick reference cards - are short, optimized instructions that enable a standardized procedure in case of medical claims.

Procedures in complex systems: the airline cockpit.

PubMed

Degani, A; Wiener, E L

1997-05-01

In complex human-machine systems, successful operations depend on an elaborate set of procedures which are specified by the operational management of the organization. These procedures indicate to the human operator (in this case the pilot) the manner in which operational management intends to have various tasks done. The intent is to provide guidance to the pilots and to ensure a safe, logical, efficient, and predictable (standardized) means of carrying out the objectives of the job. However, procedures can become a hodge-podge. Inconsistent or illogical procedures may lead to noncompliance by operators. Based on a field study with three major airlines, the authors propose a model for procedure development called the "Four P's": philosophy, policies, procedures, and practices. Using this model as a framework, the authors discuss the intricate issue of designing flight-deck procedures, and propose a conceptual approach for designing any set of procedures. The various factors, both external and internal to the cockpit, that must be considered for procedure design are presented. In particular, the paper addresses the development of procedures for automated cockpits--a decade-long, and highly controversial issue in commercial aviation. Although this paper is based on airline operations, we assume that the principles discussed here are also applicable to other high-risk supervisory control systems, such as space flight, manufacturing process control, nuclear power production, and military operations.

Parallel Domain Decomposition Formulation and Software for Large-Scale Sparse Symmetrical/Unsymmetrical Aeroacoustic Applications

NASA Technical Reports Server (NTRS)

Nguyen, D. T.; Watson, Willie R. (Technical Monitor)

2005-01-01

The overall objectives of this research work are to formulate and validate efficient parallel algorithms, and to efficiently design/implement computer software for solving large-scale acoustic problems, arised from the unified frameworks of the finite element procedures. The adopted parallel Finite Element (FE) Domain Decomposition (DD) procedures should fully take advantages of multiple processing capabilities offered by most modern high performance computing platforms for efficient parallel computation. To achieve this objective. the formulation needs to integrate efficient sparse (and dense) assembly techniques, hybrid (or mixed) direct and iterative equation solvers, proper pre-conditioned strategies, unrolling strategies, and effective processors' communicating schemes. Finally, the numerical performance of the developed parallel finite element procedures will be evaluated by solving series of structural, and acoustic (symmetrical and un-symmetrical) problems (in different computing platforms). Comparisons with existing "commercialized" and/or "public domain" software are also included, whenever possible.

Evaluation of a Combined Cyclone and Gas Filtration System for Particulate Removal in the Gasification Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rizzo, Jeffrey J.

2010-04-30

The Wabash gasification facility, owned and operated by sgSolutions LLC, is one of the largest single train solid fuel gasification facilities in the world capable of transforming 2,000 tons per day of petroleum coke or 2,600 tons per day of bituminous coal into synthetic gas for electrical power generation. The Wabash plant utilizes Phillips66 proprietary E-Gas (TM) Gasification Process to convert solid fuels such as petroleum coke or coal into synthetic gas that is fed to a combined cycle combustion turbine power generation facility. During plant startup in 1995, reliability issues were realized in the gas filtration portion of themore » gasification process. To address these issues, a slipstream test unit was constructed at the Wabash facility to test various filter designs, materials and process conditions for potential reliability improvement. The char filtration slipstream unit provided a way of testing new materials, maintenance procedures, and process changes without the risk of stopping commercial production in the facility. It also greatly reduced maintenance expenditures associated with full scale testing in the commercial plant. This char filtration slipstream unit was installed with assistance from the United States Department of Energy (built under DOE Contract No. DE-FC26-97FT34158) and began initial testing in November of 1997. It has proven to be extremely beneficial in the advancement of the E-Gas (TM) char removal technology by accurately predicting filter behavior and potential failure mechanisms that would occur in the commercial process. After completing four (4) years of testing various filter types and configurations on numerous gasification feed stocks, a decision was made to investigate the economic and reliability effects of using a particulate removal gas cyclone upstream of the current gas filtration unit. A paper study had indicated that there was a real potential to lower both installed capital and operating costs by implementing a char cyclonefiltration hybrid unit in the E-Gas (TM) gasification process. These reductions would help to keep the E-Gas (TM) technology competitive among other coal-fired power generation technologies. The Wabash combined cyclone and gas filtration slipstream test program was developed to provide design information, equipment specification and process control parameters of a hybrid cyclone and candle filter particulate removal system in the E-Gas (TM) gasification process that would provide the optimum performance and reliability for future commercial use. The test program objectives were as follows: 1. Evaluate the use of various cyclone materials of construction; 2. Establish the optimal cyclone efficiency that provides stable long term gas filter operation; 3. Determine the particle size distribution of the char separated by both the cyclone and candle filters. This will provide insight into cyclone efficiency and potential future plant design; 4. Determine the optimum filter media size requirements for the cyclone-filtration hybrid unit; 5. Determine the appropriate char transfer rates for both the cyclone and filtration portions of the hybrid unit; 6. Develop operating procedures for the cyclone-filtration hybrid unit; and, 7. Compare the installed capital cost of a scaled-up commercial cyclone-filtration hybrid unit to the current gas filtration design without a cyclone unit, such as currently exists at the Wabash facility.« less

47 CFR 1.526 - Records to be maintained locally for public inspection by commercial applicants, permittees and...

Code of Federal Regulations, 2010 CFR

2010-10-01

... inspection by commercial applicants, permittees and licensees. 1.526 Section 1.526 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Broadcast Applications and Proceedings General Filing Requirements § 1.526 Records to be maintained locally for public inspection by commercial applicants...

Species Identity of Commercial Stocks of Paramecium in the U.S.

ERIC Educational Resources Information Center

Cole, Thomas A.; And Others

1992-01-01

Describes how paramecium can be identified through the use of DNA-binding fluorescent compounds. The authors used these techniques to test the paramecium stocks from 12 commercial sources. The details of the staining procedures and the results of the commercial tests are presented in this article. (PR)

16 CFR 1015.16 - Exemptions (5 U.S.C. 552(b)).

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Exemptions (5 U.S.C. 552(b)). 1015.16 Section 1015.16 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL PROCEDURES FOR DISCLOSURE... particular types of matters to be withheld. (d) Trade secrets and commercial or financial information...

Optimising methods of red cell sedimentation from cord blood to maximise nucleated cell recovery prior to cryopreservation.

PubMed

Madkaikar, M; Gupta, M; Ghosh, K; Swaminathan, S; Sonawane, L; Mohanty, D

2007-01-01

Human cord blood is now an established source of stem cells for haematopoietic reconstitution. Red blood cell (RBC) depletion is required to reduce the cord blood unit volume for commercial banking. Red cell sedimentation using hydroxy ethyl starch (HES) is a standard procedure in most cord blood banks. However, while standardising the procedure for cord blood banking, a significant loss of nucleated cells (NC) may be encountered during standard HES sedimentation protocols. This study compares four procedures for cord blood processing to obtain optimal yield of nucleated cells. Gelatin, dextran, 6% HES and 6% HES with an equal volume of phosphate-buffered saline (PBS) were compared for RBC depletion and NC recovery. Dilution of the cord blood unit with an equal volume of PBS prior to sedimentation with HES resulted in maximum NC recovery (99% [99.5 +/- 1.3%]). Although standard procedures using 6% HES are well established in Western countries, they may not be applicable in India, as a variety of factors that can affect RBC sedimentation (e.g., iron deficiency, hypoalbuminaemia, thalassaemia trait, etc.) may reduce RBC sedimentation and thus reduce NC recovery. While diluting cord blood with an equal volume of PBS is a simple method to improve the NC recovery, it does involve an additional processing step.

Optimization of business processes in banks through flexible workflow

NASA Astrophysics Data System (ADS)

Postolache, V.

2017-08-01

This article describes an integrated business model of a commercial bank. There are examples of components that go into its composition: wooden models and business processes, strategic goals, organizational structure, system architecture, operational and marketing risk models, etc. The practice has shown that the development and implementation of the integrated business model of the bank significantly increase operating efficiency and its management, ensures organizational and technology stable development. Considering the evolution of business processes in the banking sector, should be analysed their common characteristics. From the author’s point of view, a business process is a set of various activities of a commercial bank in which “Input” is one or more financial and material resources, as a result of this activity and “output” is created by banking product, which is some value to consumer. Using workflow technology, management business process efficiency issue is a matter of managing the integration of resources and sequence of actions aimed at achieving this goal. In turn, it implies management of jobs or functions’ interaction, synchronizing of the assignments periods, reducing delays in the transmission of the results etc. Workflow technology is very important for managers at all levels, as they can use it to easily strengthen the control over what is happening in a particular unit, and in the bank as a whole. The manager is able to plan, to implement rules, to interact within the framework of the company’s procedures and tasks entrusted to the system of the distribution function and execution control, alert on the implementation and issuance of the statistical data on the effectiveness of operating procedures. Development and active use of the integrated bank business model is one of the key success factors that contribute to long-term and stable development of the bank, increase employee efficiency and business processes, implement the strategic objectives.

Mouse hepatitis virus immunofluorescence in formalin- or Bouin's-fixed tissues using trypsin digestion.

PubMed

Brownstein, D G; Barthold, S W

1982-02-01

Mouse hepatitis viral antigens were demonstrated by immunofluorescence in formalin- and Bouin's-fixed tissues processed routinely for histopathology followed by partial digestion with trypsin. Staining was superior in tissues fixed in formalin and was not diminished in tissue sections from paraffin blocks stored at room temperature as long as 2 years. The relative ease of this procedure and the commercial availability of reagents makes this a useful technique for the definitive diagnosis of mouse hepatitis virus infection.

Informed consent in medical decision-making in commercial gestational surrogacy: a mixed methods study in New Delhi, India.

PubMed

Tanderup, Malene; Reddy, Sunita; Patel, Tulsi; Nielsen, Birgitte Bruun

2015-05-01

To investigate ethical issues in informed consent for decisions regarding embryo transfer and fetal reduction in commercial gestational surrogacy. Mixed methods study employing observations, an interview-guide and semi-structured interviews. Fertility clinics and agencies in Delhi, India, between December 2011 and December 2012. Doctors providing conceptive technologies to commissioning couples and carrying out surrogacy procedures; surrogate mothers; agents functioning as links for surrogacy. Interviews using semi-structured interview guides were carried out among 20 doctors in 18 fertility clinics, five agents from four agencies and 14 surrogate mothers. Surrogate mothers were interviewed both individually and in the presence of doctors and agents. Data on socio-economic context and experiences among and between various actors in the surrogacy process were coded to identify categories of ethical concern. Numerical and grounded theory-oriented analyses were used. Informed consent, number of embryos transferred, fetal reduction, conflict of interest among the involved parties. None of the 14 surrogate mothers were able to explain the risks involved in embryo transfer and fetal reduction. The majority of the doctors took unilateral decisions about embryo transfer and fetal reduction. The commissioning parents were usually only indirectly involved. In the qualitative analysis, difficulties in explaining procedures, autonomy, self-payment of fertility treatment and conflicts of interest were the main themes. Clinical procedural decisions were primarily made by the doctors. Surrogate mothers were not adequately informed. There is a need for regulation on decision-making procedures to safeguard the interests of surrogate mothers. © 2015 Nordic Federation of Societies of Obstetrics and Gynecology.

48 CFR 410.002 - Procedures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ACQUISITION PLANNING MARKET RESEARCH 410.002 Procedures. Market research must include obtaining information on the commercial quality assurance practices as an alternative for Government inspection and testing...

48 CFR 410.002 - Procedures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ACQUISITION PLANNING MARKET RESEARCH 410.002 Procedures. Market research must include obtaining information on the commercial quality assurance practices as an alternative for Government inspection and testing...

48 CFR 410.002 - Procedures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ACQUISITION PLANNING MARKET RESEARCH 410.002 Procedures. Market research must include obtaining information on the commercial quality assurance practices as an alternative for Government inspection and testing...

10 CFR 431.91 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... EQUIPMENT Commercial Air Conditioners and Heat Pumps § 431.91 Purpose and scope. This subpart specifies test procedures and energy conservation standards for certain commercial air conditioners and heat pumps, pursuant...

10 CFR 431.91 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... EQUIPMENT Commercial Air Conditioners and Heat Pumps § 431.91 Purpose and scope. This subpart specifies test procedures and energy conservation standards for certain commercial air conditioners and heat pumps, pursuant...

10 CFR 431.91 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... EQUIPMENT Commercial Air Conditioners and Heat Pumps § 431.91 Purpose and scope. This subpart specifies test procedures and energy conservation standards for certain commercial air conditioners and heat pumps, pursuant...

10 CFR 431.91 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... EQUIPMENT Commercial Air Conditioners and Heat Pumps § 431.91 Purpose and scope. This subpart specifies test procedures and energy conservation standards for certain commercial air conditioners and heat pumps, pursuant...

10 CFR 431.91 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... EQUIPMENT Commercial Air Conditioners and Heat Pumps § 431.91 Purpose and scope. This subpart specifies test procedures and energy conservation standards for certain commercial air conditioners and heat pumps, pursuant...

A conceptual framework for the design of environmental post-market monitoring of genetically modified plants.

PubMed

Sanvido, Olivier; Widmer, Franco; Winzeler, Michael; Bigler, Franz

2005-01-01

Genetically modified plants (GMPs) may soon be cultivated commercially in several member countries of the European Union (EU). According to EU Directive 2001/18/EC, post-market monitoring (PMM) for commercial GMP cultivation must be implemented, in order to detect and prevent adverse effects on human health and the environment. However, no general PMM strategies for GMP cultivation have been established so far. We present a conceptual framework for the design of environmental PMM for GMP cultivation based on current EU legislation and common risk analysis procedures. We have established a comprehensive structure of the GMP approval process, consisting of pre-market risk assessment (PMRA) as well as PMM. Both programs can be distinguished conceptually due to principles inherent to risk analysis procedures. The design of PMM programs should take into account the knowledge gained during approval for commercialization of a specific GMP and the decisions made in the environmental risk assessments (ERAs). PMM is composed of case-specific monitoring (CSM) and general surveillance. CSM focuses on anticipated effects of a specific GMP. Selection of case-specific indicators for detection of ecological exposure and effects, as well as definition of effect sizes, are important for CSM. General surveillance is designed to detect unanticipated effects on general safeguard subjects, such as natural resources, which must not be adversely affected by human activities like GMP cultivation. We have identified clear conceptual differences between CSM and general surveillance, and propose to adopt separate frameworks when developing either of the two programs. Common to both programs is the need to put a value on possible ecological effects of GMP cultivation. The structure of PMM presented here will be of assistance to industry, researchers, and regulators, when assessing GMPs during commercialization.

Anesthesia Service Use During Outpatient Gastroenterology Procedures Continued to Increase From 2010 to 2013 and Potentially Discretionary Spending Remained High.

PubMed

Predmore, Zachary; Nie, Xiaoyu; Main, Regan; Mattke, Soeren; Liu, Hangsheng

2017-02-01

Previous studies have identified an increasing number of gastroenterology (GI) procedures using anesthesia services to provide sedation, with a majority of these services delivered to low-risk patients. The aim of this study was to update these trends with the most recent years of data. We used Medicare and commercial claims data from 2010 to 2013 to identify GI procedures and anesthesia services based on CPT codes, which were linked together using patient identifiers and dates of service. We defined low-risk patients as those who were classified as ASA (American Society of Anesthesiologists) physical status class I or II. For those patients without an ASA class listed on the claim, we used a prediction algorithm to impute an ASA physical status. Over 6.6 million patients in our sample had a GI procedure between 2010 and 2013. GI procedures involving anesthesia service accounted for 33.7% in 2010 and 47.6% in 2013 in Medicare patients, and 38.3% in 2010 and 53.0% in 2013 in commercially insured patients. Overall, as more patients used anesthesia services, total anesthesia service use in low-risk patients increased 14%, from 27,191 to 33,181 per million Medicare enrollees. Similarly, we observed a nearly identical uptick in commercially insured patients from 15,871 to 22,247 per million, an increase of almost 15%. During 2010-2013, spending associated with anesthesia services in low-risk patients increased from US$3.14 million to US$3.45 million per million Medicare enrollees and from US$7.69 million to US$10.66 million per million commercially insured patients. During 2010 to 2013, anesthesia service use in GI procedures continued to increase and the proportion of these services rendered for low-risk patients remained high.

A New Commercializable Route for the Preparation of Single-Source Precursors for Bulk, Thin-Film, and Nanocrystallite I-III-IV Semiconductors

NASA Technical Reports Server (NTRS)

Banger, Kulbinder K.; Jin, Michael H. C.; Harris, Jerry D.; Fanwick, Philip E.; Hepp, Aloysius F.

2004-01-01

We report a new simplified synthetic procedure for commercial manufacture of ternary single source precursors (SSP). This new synthetic process has been successfully implemented to fabricate known SSPs on bulk scale and the first liquid SSPs to the semiconductors CuInSe2 and AgIn(x)S(y). Single crystal X-ray determination reveals the first unsolvated ternary AgInS SSP. SSPs prepared via this new route have successfully been used in a spray assisted chemical vapor deposition (CVD) process to deposit polycrystalline thin films, and for preparing ternary nanocrystallites.

Prospects for commercial production of diatoms

DOE PAGES

Wang, Jaw -Kai; Seibert, Michael

2017-01-18

In this paper, a simple procedure that portends the open-pond growth of commercially viable diatoms is discussed. We examined a number of topics relevant to the production and harvesting of diatoms as well as topics concerning the production of bioproducts from diatoms. Among the former topics, we show that it is currently possible to continuously grow diatoms and control the presence of invasive species without chemical toxins at an average annual yield of 132 MT dry diatoms ha -1 over a period of almost 5 years, while maintaining the dominancy of the optimal diatom species on a seasonal basis. Themore » dominant species varies during the year. The production of microalgae is essentially agriculture, but without the ability to control invasive species in the absence of herbicides and insecticides, pollution and production costs would be prohibitive. Among the latter topics are the discussions of whether it is better to produce lipids and then convert them to biofuels or maximize the production of diatom biomass and then convert it to biocrude products using, for example, hydrothermal processes. It is becoming increasingly evident that without massive public support, the commercial production of microalgal biofuels alone will remain elusive. While economically competitive production of biofuels from diatoms will be difficult, when priority is given to multiple high-value products, including wastewater treatment, and when biofuels are considered co-products in a systems approach to commercial production of diatoms, an economically competitive process will become more likely.« less

Prospects for commercial production of diatoms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Jaw -Kai; Seibert, Michael

In this paper, a simple procedure that portends the open-pond growth of commercially viable diatoms is discussed. We examined a number of topics relevant to the production and harvesting of diatoms as well as topics concerning the production of bioproducts from diatoms. Among the former topics, we show that it is currently possible to continuously grow diatoms and control the presence of invasive species without chemical toxins at an average annual yield of 132 MT dry diatoms ha -1 over a period of almost 5 years, while maintaining the dominancy of the optimal diatom species on a seasonal basis. Themore » dominant species varies during the year. The production of microalgae is essentially agriculture, but without the ability to control invasive species in the absence of herbicides and insecticides, pollution and production costs would be prohibitive. Among the latter topics are the discussions of whether it is better to produce lipids and then convert them to biofuels or maximize the production of diatom biomass and then convert it to biocrude products using, for example, hydrothermal processes. It is becoming increasingly evident that without massive public support, the commercial production of microalgal biofuels alone will remain elusive. While economically competitive production of biofuels from diatoms will be difficult, when priority is given to multiple high-value products, including wastewater treatment, and when biofuels are considered co-products in a systems approach to commercial production of diatoms, an economically competitive process will become more likely.« less

NASA Technology Applications Team: Commercial applications of aerospace technology

NASA Technical Reports Server (NTRS)

1994-01-01

The Research Triangle Institute (RTI) is pleased to report the results of NASA contract NASW-4367, 'Operation of a Technology Applications Team'. Through a period of significant change within NASA, the RTI Team has maintained its focus on helping NASA establish partnerships with U.S. industry for dual use development and technology commercialization. Our emphasis has been on outcomes, such as licenses, industry partnerships and commercialization of technologies that are important to NASA in its mission of contributing to the improved competitive position of U.S. industry. RTI's ongoing commitment to quality and customer responsiveness has driven our staff to continuously improve our technology transfer methodologies to meet NASA's requirements. For example, RTI has emphasized the following areas: (1) Methodology For Technology Assessment and Marketing: RTI has developed an implemented effective processes for assessing the commercial potential of NASA technologies. These processes resulted from an RTI study of best practices, hands-on experience, and extensive interaction with the NASA Field Centers to adapt to their specific needs; (2) Effective Marketing Strategies: RTI surveyed industry technology managers to determine effective marketing tools and strategies. The Technology Opportunity Announcement format and content were developed as a result of this industry input. For technologies with a dynamic visual impact, RTI has developed a stand-alone demonstration diskette that was successful in developing industry interest in licensing the technology; and (3) Responsiveness to NASA Requirements: RTI listened to our customer (NASA) and designed our processes to conform with the internal procedures and resources at each NASA Field Center and the direction provided by NASA's Agenda for Change. This report covers the activities of the Research Triangle Institute Technology Applications Team for the period 1 October 1993 through 31 December 1994.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parthasarathy, Srinandini; McKone, Thomas E.; Apte, Michael G.

This report summarizes the screening procedure and its results for selecting contaminants of concern (COC), whose concentrations are affected by ventilation in commercial buildings. Many pollutants comprising criteria pollutants, volatile organic compounds (VOCs), semi-volatile organic compounds (SVOCs) and biological contaminants are found in commercial buildings. In this report, we focus primarily on identifying potential volatile organic COC, which are impacted by ventilation. In the future we plan to extend this effort to inorganic gases and particles. Our screening considers compounds detected frequently in indoor air and compares the concentrations to health-guidelines and thresholds. However, given the range of buildings undermore » consideration, the contaminant sources and their concentrations will vary depending on the activity and use of the buildings. We used a literature review to identify a large list of chemicals found in commercial-building indoor air. The VOCs selected were subject to a two stage screening process, and the compounds of greater interest are included in priority List A. Other VOCs that have been detected in commercial buildings are included in priority List B. The compounds in List B, were further classified into groups B1, B2, B3, B4 in order of decreasing interest.« less

10 CFR 431.134 - Uniform test methods for the measurement of energy consumption and water consumption of automatic...

Code of Federal Regulations, 2011 CFR

2011-01-01

... consumption and water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy... EQUIPMENT Automatic Commercial Ice Makers Test Procedures § 431.134 Uniform test methods for the measurement of energy consumption and water consumption of automatic commercial ice makers. (a) Scope. This...

Microgravity

NASA Image and Video Library

2004-04-15

The Commercial Vapor Diffusion Apparatus will be used to perform 128 individual crystal growth investigations for commercial and science research. These experiments will grow crystals of several different proteins, including HIV-1 Protease Inhibitor, Glycogen Phosphorylase A, and NAD Synthetase. The Commercial Vapor Diffusion Apparatus supports multiple commercial investigations within a controlled environment. The goal of the Commercial Protein Crystal Growth payload on STS-95 is to grow large, high-quality crystals of several different proteins of interest to industry, and to continue to refine the technology and procedures used in microgravity for this important commercial research.

The Commercial Vapor Diffusion Apparatus (CVDA) STS-95

NASA Technical Reports Server (NTRS)

2004-01-01

The Commercial Vapor Diffusion Apparatus will be used to perform 128 individual crystal growth investigations for commercial and science research. These experiments will grow crystals of several different proteins, including HIV-1 Protease Inhibitor, Glycogen Phosphorylase A, and NAD Synthetase. The Commercial Vapor Diffusion Apparatus supports multiple commercial investigations within a controlled environment. The goal of the Commercial Protein Crystal Growth payload on STS-95 is to grow large, high-quality crystals of several different proteins of interest to industry, and to continue to refine the technology and procedures used in microgravity for this important commercial research.

Single-crystal diffraction at the Extreme Conditions beamline P02.2: procedure for collecting and analyzing high-pressure single-crystal data.

PubMed

Rothkirch, André; Gatta, G Diego; Meyer, Mathias; Merkel, Sébastien; Merlini, Marco; Liermann, Hanns Peter

2013-09-01

Fast detectors employed at third-generation synchrotrons have reduced collection times significantly and require the optimization of commercial as well as customized software packages for data reduction and analysis. In this paper a procedure to collect, process and analyze single-crystal data sets collected at high pressure at the Extreme Conditions beamline (P02.2) at PETRA III, DESY, is presented. A new data image format called `Esperanto' is introduced that is supported by the commercial software package CrysAlis(Pro) (Agilent Technologies UK Ltd). The new format acts as a vehicle to transform the most common area-detector data formats via a translator software. Such a conversion tool has been developed and converts tiff data collected on a Perkin Elmer detector, as well as data collected on a MAR345/555, to be imported into the CrysAlis(Pro) software. In order to demonstrate the validity of the new approach, a complete structure refinement of boron-mullite (Al5BO9) collected at a pressure of 19.4 (2) GPa is presented. Details pertaining to the data collections and refinements of B-mullite are presented.

16 CFR 1610.6 - Test procedure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test procedure. 1610.6 Section 1610.6... FLAMMABILITY OF CLOTHING TEXTILES The Standard § 1610.6 Test procedure. The test procedure is divided into two... according to paragraph (b)(1) of this section. (a) Step 1—Testing in the original state. (1) Tests shall be...

16 CFR 1610.6 - Test procedure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Test procedure. 1610.6 Section 1610.6... FLAMMABILITY OF CLOTHING TEXTILES The Standard § 1610.6 Test procedure. The test procedure is divided into two... according to paragraph (b)(1) of this section. (a) Step 1—Testing in the original state. (1) Tests shall be...

16 CFR 1610.6 - Test procedure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Test procedure. 1610.6 Section 1610.6... FLAMMABILITY OF CLOTHING TEXTILES The Standard § 1610.6 Test procedure. The test procedure is divided into two... according to paragraph (b)(1) of this section. (a) Step 1—Testing in the original state. (1) Tests shall be...

16 CFR 1610.40 - Use of alternate apparatus, procedures, or criteria for tests for guaranty purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Use of alternate apparatus, procedures, or... Rules and Regulations § 1610.40 Use of alternate apparatus, procedures, or criteria for tests for... 1610 prescribes apparatus and procedures for testing fabrics and garments subject to its provisions...

16 CFR 1610.40 - Use of alternate apparatus, procedures, or criteria for tests for guaranty purposes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Use of alternate apparatus, procedures, or... Rules and Regulations § 1610.40 Use of alternate apparatus, procedures, or criteria for tests for... 1610 prescribes apparatus and procedures for testing fabrics and garments subject to its provisions...

49 CFR 399.209 - Test procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Test procedures. 399.209 Section 399.209 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... STANDARDS Step, Handhold, and Deck Requirements for Commercial Motor Vehicles § 399.209 Test procedures. (a...

Chemical safety of cassava products in regions adopting cassava production and processing--experience from Southern Africa.

PubMed

Nyirenda, D B; Chiwona-Karltun, L; Chitundu, M; Haggblade, S; Brimer, L

2011-03-01

The cassava belt area in Southern Africa is experiencing an unforeseen surge in cassava production, processing and consumption. Little documentation exists on the effects of this surge on processing procedures, the prevailing levels of cyanogenic glucosides of products consumed and the levels of products commercially available on the market. Risk assessments disclose that effects harmful to the developing central nervous system (CNS) may be observed at a lower exposure than previously anticipated. We interviewed farmers in Zambia and Malawi about their cultivars, processing procedures and perceptions concerning cassava and chemical food safety. Chips, mixed biscuits and flour, procured from households and markets in three regions of Zambia (Luapula-North, Western and Southern) as well as products from the Northern, Central and Southern regions of Malawi, were analyzed for total cyanogenic potential (CNp). Processed products from Luapula showed a low CNp, <10 mg HCN equiv./kg air dried weight, while samples from Mongu, Western Province, exhibited high levels of CNp, varying from 50 to 290 mg HCN equiv./kg. Even the lowest level is five times higher than the recommended safety level of 10mg/kg decided on for cassava flour. Our results call for concerted efforts in promoting gender oriented processing technologies. Copyright © 2010 Elsevier Ltd. All rights reserved.

Commercial versus PARTNER study experience with the transfemoral Edwards SAPIEN valve for inoperable patients with severe aortic stenosis.

PubMed

Pendyala, Lakshmana K; Minha, Sa'ar; Barbash, Israel M; Torguson, Rebecca; Magalhaes, Marco A; Okubagzi, Petros; Loh, Joshua P; Chen, Fang; Satler, Lowell F; Pichard, Augusto D; Waksman, Ron

2014-01-15

In patients with aortic stenosis who cannot have surgery, transcatheter aortic valve replacement using the Edwards SAPIEN valve has been shown to improve survival rate and is approved for commercial use in the United States. This study aims to assess the clinical profile, procedural characteristics, and in-hospital complications in patients treated with a commercial SAPIEN valve outside the clinical trial context. We retrospectively analyzed 69 consecutive patients who underwent transcatheter aortic valve replacement with a commercial SAPIEN valve compared with 55 Placement of AoRTic traNscathetER valves (PARTNER) trial patients from cohort B enrolled in the same institution by the same Heart Team. Compared with the commercial group, patients in the PARTNER cohort B had higher mean Society of Thoracic Surgeons score (10 ± 5 vs 9 ± 4, p = 0.04) and a lower rate of peripheral arterial disease (19% vs 44%, p = 0.004). Most patients in the commercial group had the procedure under conscious sedation (83% vs 66%, p = 0.03). Planned surgical cut down for vascular access was rare in the commercial group (1.4% vs 46%, p <0.001). The overall rates of major vascular complications, life-threatening or major bleeding, and blood transfusions were lower in commercial group (7.2% vs 27%, p = 0.003; 2.9% vs 16%, p = 0.01; and 28% vs 60%, p <0.001, respectively). In-hospital all-cause mortality (5.8% vs 9.1%, p = 0.51) and stroke rates (7.2% vs 14.5%, p = 0.19) were not statistically different between groups. The median length of hospitalization (p <0.001) and postprocedural length of stay (p = 0.01) was shorter in the commercial group. In conclusion, transfemoral commercial use of the Edwards SAPIEN valve for inoperable patients shows similar in-hospital mortality and stroke rates compared with PARTNER cohort B. The refinements in the procedure such as more conscious sedation, experience of the operators, and careful vascular planning in the commercial group led to lesser vascular and bleeding complications and shorter length of stay. Copyright © 2014 Elsevier Inc. All rights reserved.

A traceable reference for direct comparative assessment of total naphthenic acid concentrations in commercial and acid extractable organic mixtures derived from oil sands process water.

PubMed

Brunswick, Pamela; Hewitt, L Mark; Frank, Richard A; Kim, Marcus; van Aggelen, Graham; Shang, Dayue

2017-02-23

The advantage of using naphthenic acid (NA) mixtures for the determination of total NA lies in their chemical characteristics and identification of retention times distinct from isobaric interferences. However, the differing homolog profiles and unknown chemical structures of NA mixtures do not allow them to be considered a traceable reference material. The current study provides a new tool for the comparative assessment of different NA mixtures by direct reference to a single, well-defined and traceable compound, decanoic-d 19 acid. The method employed an established liquid chromatography time-of-flight mass spectrometry (LC/QToF) procedure that was applicable both to the classic O2 NA species dominating commercial mixtures and additionally to the O4 species known to be present in acid extractable organics (AEOs) derived from oil sands process water (OSPW). Four different commercial NA mixtures and one OSPW-derived AEOs mixture were comparatively assessed. Results showed significant difference among Merichem Technical, Aldrich, Acros, and Kodak commercial NA mixtures with respect to "equivalent to decanoic-d 19 acid" concentration ratios to nominal. Furthermore, different lot numbers of single commercial NA mixtures were found to be inconsistent with respect to their homolog content by percent response. Differences in the observed homolog content varied significantly, particularly at the lower (n = 9-14) and higher (n = 20-23) carbon number ranges. Results highlighted the problem between using NA mixtures from different sources and different lot numbers but offered a solution to the problem from a concentration perspective. It is anticipated that this tool may be utilized in review of historical data in addition to future studies, such as the study of OSPW derived acid extractable organics (AEOs) and fractions employed during toxicological studies.

10 CFR 431.135 - Units to be tested.

Code of Federal Regulations, 2011 CFR

2011-01-01

... EQUIPMENT Automatic Commercial Ice Makers Test Procedures § 431.135 Units to be tested. For each basic model of automatic commercial ice maker selected for testing, a sample of sufficient size shall be selected...

A Geometry Based Infra-structure for Computational Analysis and Design

NASA Technical Reports Server (NTRS)

Haimes, Robert

1997-01-01

The computational steps traditionally taken for most engineering analysis (CFD, structural analysis, and etc.) are: Surface Generation - usually by employing a CAD system; Grid Generation - preparing the volume for the simulation; Flow Solver - producing the results at the specified operational point; and Post-processing Visualization - interactively attempting to understand the results For structural analysis, integrated systems can be obtained from a number of commercial vendors. For CFD, these steps have worked well in the past for simple steady-state simulations at the expense of much user interaction. The data was transmitted between phases via files. Specifically the problems with this procedure are: (1) File based. Information flows from one step to the next via data files with formats specified for that procedure. (2) 'Good' Geometry. A bottleneck in getting results from a solver is the construction of proper geometry to be fed to the grid generator. With 'good' geometry a grid can be constructed in tens of minutes (even with a complex configuration) using unstructured techniques. (3) One-Way communication. All information travels on from one phase to the next. Until this process can be automated, more complex problems such as multi-disciplinary analysis or using the above procedure for design becomes prohibitive.

Nuclear Fuel Reprocessing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harold F. McFarlane; Terry Todd

2013-11-01

Reprocessing is essential to closing nuclear fuel cycle. Natural uranium contains only 0.7 percent 235U, the fissile (see glossary for technical terms) isotope that produces most of the fission energy in a nuclear power plant. Prior to being used in commercial nuclear fuel, uranium is typically enriched to 3–5% in 235U. If the enrichment process discards depleted uranium at 0.2 percent 235U, it takes more than seven tonnes of uranium feed to produce one tonne of 4%-enriched uranium. Nuclear fuel discharged at the end of its economic lifetime contains less one percent 235U, but still more than the natural ore.more » Less than one percent of the uranium that enters the fuel cycle is actually used in a single pass through the reactor. The other naturally occurring isotope, 238U, directly contributes in a minor way to power generation. However, its main role is to transmute into plutoniumby neutron capture and subsequent radioactive decay of unstable uraniumand neptuniumisotopes. 239Pu and 241Pu are fissile isotopes that produce more than 40% of the fission energy in commercially deployed reactors. It is recovery of the plutonium (and to a lesser extent the uranium) for use in recycled nuclear fuel that has been the primary focus of commercial reprocessing. Uraniumtargets irradiated in special purpose reactors are also reprocessed to obtain the fission product 99Mo, the parent isotope of technetium, which is widely used inmedical procedures. Among the fission products, recovery of such expensive metals as platinum and rhodium is technically achievable, but not economically viable in current market and regulatory conditions. During the past 60 years, many different techniques for reprocessing used nuclear fuel have been proposed and tested in the laboratory. However, commercial reprocessing has been implemented along a single line of aqueous solvent extraction technology called plutonium uranium reduction extraction process (PUREX). Similarly, hundreds of types of reactor fuels have been irradiated for different purposes, but the vast majority of commercial fuel is uranium oxide clad in zirconium alloy tubing. As a result, commercial reprocessing plants have relatively narrow technical requirements for used nuclear that is accepted for processing.« less

19 CFR 151.52 - Sampling procedures.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Sampling procedures. 151.52 Section 151.52 Customs... (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Metal-Bearing Ores and Other Metal-Bearing Materials § 151.52 Sampling procedures. (a) Commercial samples taken under Customs supervision...

19 CFR 151.52 - Sampling procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Sampling procedures. 151.52 Section 151.52 Customs... (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Metal-Bearing Ores and Other Metal-Bearing Materials § 151.52 Sampling procedures. (a) Commercial samples taken under Customs supervision...

13 CFR 302.6 - Additional requirements; Federal policies and procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Cooperative Agreements with Institutions of Higher Education, Hospitals, other Non-Profit and Commercial... policies and procedures. 302.6 Section 302.6 Business Credit and Assistance ECONOMIC DEVELOPMENT... requirements; Federal policies and procedures. Recipients are subject to all Federal laws and to Federal...

13 CFR 302.6 - Additional requirements; Federal policies and procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Cooperative Agreements with Institutions of Higher Education, Hospitals, other Non-Profit and Commercial... policies and procedures. 302.6 Section 302.6 Business Credit and Assistance ECONOMIC DEVELOPMENT... requirements; Federal policies and procedures. Recipients are subject to all Federal laws and to Federal...

13 CFR 302.6 - Additional requirements; Federal policies and procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Cooperative Agreements with Institutions of Higher Education, Hospitals, other Non-Profit and Commercial... policies and procedures. 302.6 Section 302.6 Business Credit and Assistance ECONOMIC DEVELOPMENT... requirements; Federal policies and procedures. Recipients are subject to all Federal laws and to Federal...

13 CFR 302.6 - Additional requirements; Federal policies and procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Cooperative Agreements with Institutions of Higher Education, Hospitals, other Non-Profit and Commercial... policies and procedures. 302.6 Section 302.6 Business Credit and Assistance ECONOMIC DEVELOPMENT... requirements; Federal policies and procedures. Recipients are subject to all Federal laws and to Federal...

13 CFR 302.6 - Additional requirements; Federal policies and procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Cooperative Agreements with Institutions of Higher Education, Hospitals, other Non-Profit and Commercial... policies and procedures. 302.6 Section 302.6 Business Credit and Assistance ECONOMIC DEVELOPMENT... requirements; Federal policies and procedures. Recipients are subject to all Federal laws and to Federal...

10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures § 431.193 Test procedures for measuring energy consumption of distribution transformers. The test...

10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures § 431.193 Test procedures for measuring energy consumption of distribution transformers. The test...

10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures § 431.193 Test procedures for measuring energy consumption of distribution transformers. The test...

10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures § 431.193 Test procedures for measuring energy consumption of distribution transformers. The test...

10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures § 431.193 Test procedures for measuring energy consumption of distribution transformers. The test...

16 CFR 5.61 - Prehearing procedures; motions; interlocutory appeals; summary decision; discovery; compulsory...

Code of Federal Regulations, 2010 CFR

2010-01-01

... Actions Concerning Postemployment Conflict of Interest § 5.61 Prehearing procedures; motions... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Prehearing procedures; motions... involved in proceedings under this part, the Commission anticipates that extensive motions, prehearing...

16 CFR 5.61 - Prehearing procedures; motions; interlocutory appeals; summary decision; discovery; compulsory...

Code of Federal Regulations, 2011 CFR

2011-01-01

... Actions Concerning Postemployment Conflict of Interest § 5.61 Prehearing procedures; motions... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Prehearing procedures; motions... involved in proceedings under this part, the Commission anticipates that extensive motions, prehearing...

77 FR 21808 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-11

... and open source records and commercial database. EXEMPTIONS CLAIMED FOR THE SYSTEM: The Attorney... notification procedures, the record access procedures, the contesting record procedures, the record source..., confidential sources, and victims of crimes. The offenses and alleged offenses associated with the individuals...

Behavioural and physiological reactions of cattle in a commercial abattoir: relationships with organisational aspects of the abattoir and animal characteristics.

PubMed

Bourguet, Cécile; Deiss, Véronique; Tannugi, Carole Cohen; Terlouw, E M Claudia

2011-05-01

Behavioural, physiological and metabolic reactions of cattle to handling and slaughter procedures were evaluated in a commercial abattoir, from arrival until slaughter. Different genders or breeds were not subjected to the same procedures due to abattoir equipment or organisational aspects of the abattoir. Reactions to similar slaughter procedures varied according to animal characteristics and could have consequences for subsequent handling procedures. Factors that appeared to cause handling problems and vocalisation were excessive pressure during restraint, and distractions in the corridor such as noise, darkness, seeing people and activity. Post-mortem muscle metabolism depended on slaughter procedures. Following stunning or halal slaughter, some animals showed head rising movements despite the abolition of the corneal reflex, suggesting that head rising is not always indicative of consciousness. Overall, this study presents concrete data on how different types of cattle may react to slaughter procedures with a direct interest for the abattoir itself but also for scientific purposes. Copyright © 2010. Published by Elsevier Ltd.

Umbilical cord blood banking: from personal donation to international public registries to global bioeconomy

PubMed Central

Petrini, Carlo

2014-01-01

The procedures for collecting voluntarily and freely donated umbilical cord blood (UCB) units and processing them for use in transplants are extremely costly, and the capital flows thus generated form part of an increasingly pervasive global bioeconomy. To place the issue in perspective, this article first examines the different types of UCB biobank, the organization of international registries of public UCB biobanks, the optimal size of national inventories, and the possibility of obtaining commercial products from donated units. The fees generally applied for the acquisition of UCB units for transplantation are then discussed, and some considerations are proposed regarding the social and ethical implications raised by the international network for the importation and exportation of UCB, with a particular emphasis on the globalized bioeconomy of UCB and its commerciality or lack thereof. PMID:24971040

Symposium on 'nutritional effects of new processing technologies'. New processing technologies: an overview.

PubMed

Gould, G W

2001-11-01

Most food-preservation techniques act by slowing down or completely inhibiting the growth of micro-organisms. Few techniques act by inactivating them. While heat remains the technique most extensively used for inactivation, there has been increasing interest recently in the development of alternative approaches in response to the desires of consumers for products which are less organoleptically and nutritionally damaged during processing and less reliant on additives than previously. The new approaches, therefore, mostly involve technologies that offer full or partial alternatives to heat for the inactivation of bacteria, yeasts and moulds. They include the application to foods of high hydrostatic pressure, high-voltage electric discharges, high-intensity laser and non-coherent light pulses, 'manothermosonication' (the combination of mild heating with ultrasonication and slightly-raised pressure), and high-magnetic-field pulses. In addition, a number of naturally-occurring antimicrobials, including lysozyme and low-molecular-weight products of micro-organisms are finding increasing use. High pressure is being used commercially to non-thermally pasteurize a number of foods, while the other physical procedures are in various stages of development and commercial evaluation. Possible nutritional consequences have so far been given little attention compared with microbiological ones.

Manual sorting to eliminate aflatoxin from peanuts.

PubMed

Galvez, F C F; Francisco, M L D L; Villarino, B J; Lustre, A O; Resurreccion, A V A

2003-10-01

A manual sorting procedure was developed to eliminate aflatoxin contamination from peanuts. The efficiency of the sorting process in eliminating aflatoxin-contaminated kernels from lots of raw peanuts was verified. The blanching of 20 kg of peanuts at 140 degrees C for 25 min in preheated roasters facilitated the manual sorting of aflatoxin-contaminated kernels after deskinning. The manual sorting of raw materials with initially high aflatoxin contents (300 ppb) resulted in aflatoxin-free peanuts (i.e., peanuts in which no aflatoxin was detected). Verification procedures showed that the sorted sound peanuts contained no aflatoxin or contained low levels (<15 ppb) of aflatoxin. The results obtained confirmed that the sorting process was effective in separating contaminated peanuts whether or nor contamination was extensive. At the commercial level, when roasters were not preheated, the dry blanching of 50 kg of peanuts for 45 to 55 min facilitated the proper deskinning and subsequent manual sorting of aflatoxin-contaminated peanut kernels from sound kernels.

High-power ultrasonic system for the enhancement of mass transfer in supercritical CO2 extraction processes

NASA Astrophysics Data System (ADS)

Riera, Enrique; Blanco, Alfonso; García, José; Benedito, José; Mulet, Antonio; Gallego-Juárez, Juan A.; Blasco, Miguel

2010-01-01

Oil is an important component of almonds and other vegetable substrates that can show an influence on human health. In this work the development and validation of an innovative, robust, stable, reliable and efficient ultrasonic system at pilot scale to assist supercritical CO2 extraction of oils from different substrates is presented. In the extraction procedure ultrasonic energy represents an efficient way of producing deep agitation enhancing mass transfer processes because of some mechanisms (radiation pressure, streaming, agitation, high amplitude vibrations, etc.). A previous work to this research pointed out the feasibility of integrating an ultrasonic field inside a supercritical extractor without losing a significant volume fraction. This pioneer method enabled to accelerate mass transfer and then, improving supercritical extraction times. To commercially develop the new procedure fulfilling industrial requirements, a new configuration device has been designed, implemented, tested and successfully validated for supercritical fluid extraction of oil from different vegetable substrates.

Isolation and Characterization of Chitosan-Producing Bacteria from Beaches of Chennai, India

PubMed Central

Kaur, Kuldeep; Dattajirao, Vikrant; Shrivastava, Vikas; Bhardwaj, Uma

2012-01-01

Chitosan is a deacetylated product of chitin produced by chitin deacetylase, an enzyme that hydrolyses acetamido groups of N-acetylglucosamine in chitin. Chitosan is a natural polymer that has great potential in biotechnology and in the biomedical and pharmaceutical industries. Commercially, it is produced from chitin via a harsh thermochemical process that shares most of the disadvantages of a multistep chemical procedure. It is environmentally unsafe and not easily controlled, leading to a broad and heterogeneous range of products. An alternative or complementary procedure exploiting the enzymatic deacetylation of chitin could potentially be employed, especially when a controlled and well-defined process is required. In this study, 20 strains of bacteria were isolated from soil samples collected from different beaches of Chennai, India. Of these 20 bacterial strains, only 2 strains (S3, S14) are potent degrader of chitin and they are also a good producer of the enzyme chitin deacetylase so as to release chitosan. PMID:22919468

10 CFR 431.96 - Uniform test method for the measurement of energy efficiency of commercial air conditioners and...

Code of Federal Regulations, 2013 CFR

2013-01-01

... efficiency of commercial air conditioners and heat pumps. 431.96 Section 431.96 Energy DEPARTMENT OF ENERGY... Air Conditioners and Heat Pumps Test Procedures § 431.96 Uniform test method for the measurement of energy efficiency of commercial air conditioners and heat pumps. (a) Scope. This section contains test...

10 CFR 431.96 - Uniform test method for the measurement of energy efficiency of commercial air conditioners and...

Code of Federal Regulations, 2014 CFR

2014-01-01

... efficiency of commercial air conditioners and heat pumps. 431.96 Section 431.96 Energy DEPARTMENT OF ENERGY... Air Conditioners and Heat Pumps Test Procedures § 431.96 Uniform test method for the measurement of energy efficiency of commercial air conditioners and heat pumps. (a) Scope. This section contains test...

32 CFR Appendix B to Part 169a - Commercial Activities Inventory Report and Five-Year Review Schedule

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Commercial Activities Inventory Report and Five-Year Review Schedule B Appendix B to Part 169a National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DEFENSE CONTRACTING COMMERCIAL ACTIVITIES PROGRAM PROCEDURES Pt. 169a, App. B Appendix...

A comparison of case volumes among urologic surgeons identified on an industry-sponsored website to an all provider peer group.

PubMed

See, William A; Jacobson, Kenneth; Derus, Sue; Langenstroer, Peter

2014-11-01

Industry-sponsored websites for robotic surgery direct to surgeons listed as performing specific robotic surgical procedures. The purpose of this study was to compare average annual, surgeon-specific, case volumes for those procedures for which they were listed as performing on the commercial website with the volumes of all providers performing these same procedures across a defined geographic region. A list of providers within the state of Wisconsin cited as performing specific urologic procedures was obtained through the Intuitive Surgical website 〈http://www.davincisurgery.com/da-vinci-urology/〉. Surgeon-specific annual case volumes from 2009 to 2013 for these same cases were obtained for all Wisconsin providers through DataBay Resources (Warrendale, PA) based on International classification of diseases-9 codes. Procedural activity was rank ordered, and surgeons were placed in "volume deciles" derived from the total annual number of cases performed by all surgeons. The distribution of commercially listed surgeon volumes, both 5-year average and most recent year, was compared with the average and 2013 volumes of all surgeons performing a specific procedure. A total of 35 individual urologic surgeons listed as performing robotic surgery in Wisconsin were identified through a "search" using the Intuitive Surgical website. Specific procedure analysis returned 5, 12, 9, and 15 surgeon names for cystectomy, partial nephrectomy, radical nephrectomy, and prostatectomy, respectively. This compared with the total number of surgeons who had performed the listed procedure in Wisconsin at least 1 time during the prior 5 years of 123, 153, 242, and 165, respectively. When distributed by surgeon-volume deciles, surgeons listed on industry-sponsored sites varied widely in their respective volume decile. More than half of site-listed, procedure-specific surgeons fell below the fifth decile for surgeon volume. Data analysis based solely on 2013 case volumes had no effect on the number of website-listed surgeons whose volumes fell below the fifth decile. Surgeons listed on an industry-sponsored website demonstrate wide variation in the actual volume of specific procedures performed. The inferred endorsement of competence by commercial sites has the potential to mislead patients seeking surgical expertise. Providers should consider the ethical and legal implications of these commercial advertising that do not have volume or outcome data. Published by Elsevier Inc.

State of charge estimation in Ni-MH rechargeable batteries

NASA Astrophysics Data System (ADS)

Milocco, R. H.; Castro, B. E.

In this work we estimate the state of charge (SOC) of Ni-MH rechargeable batteries using the Kalman filter based on a simplified electrochemical model. First, we derive the complete electrochemical model of the battery which includes diffusional processes and kinetic reactions in both Ni and MH electrodes. The full model is further reduced in a cascade of two parts, a linear time invariant dynamical sub-model followed by a static nonlinearity. Both parts are identified using the current and potential measured at the terminals of the battery with a simple 1-D minimization procedure. The inverse of the static nonlinearity together with a Kalman filter provide the SOC estimation as a linear estimation problem. Experimental results with commercial batteries are provided to illustrate the estimation procedure and to show the performance.

49 CFR 383.73 - State procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS COMMERCIAL DRIVER'S LICENSE..., or if the applicant has been disqualified from operating a commercial motor vehicle; (iii) A check...

Input Files and Procedures for Analysis of SMA Hybrid Composite Beams in MSC.Nastran and ABAQUS

NASA Technical Reports Server (NTRS)

Turner, Travis L.; Patel, Hemant D.

2005-01-01

A thermoelastic constitutive model for shape memory alloys (SMAs) and SMA hybrid composites (SMAHCs) was recently implemented in the commercial codes MSC.Nastran and ABAQUS. The model is implemented and supported within the core of the commercial codes, so no user subroutines or external calculations are necessary. The model and resulting structural analysis has been previously demonstrated and experimentally verified for thermoelastic, vibration and acoustic, and structural shape control applications. The commercial implementations are described in related documents cited in the references, where various results are also shown that validate the commercial implementations relative to a research code. This paper is a companion to those documents in that it provides additional detail on the actual input files and solution procedures and serves as a repository for ASCII text versions of the input files necessary for duplication of the available results.

10 CFR 431.21 - Procedures for recognition and withdrawal of recognition of accreditation bodies and...

Code of Federal Regulations, 2011 CFR

2011-01-01

... ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Electric Motors Test Procedures, Materials Incorporated and Methods of Determining Efficiency § 431.21 Procedures... Assistant Secretary for Energy Efficiency and Renewable Energy, U.S. Department of Energy, Forrestal...

16 CFR § 1209.7 - Test procedures for smoldering combustion.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Test procedures for smoldering combustion. Â... procedures for smoldering combustion. This section provides the test method for determining smoldering combustion characteristics of materials used for thermal insulation. This test shall be conducted on...

16 CFR 1209.4 - Test procedures for determining settled density.

Code of Federal Regulations, 2012 CFR

2012-01-01

... density. 1209.4 Section 1209.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... procedures for determining settled density. The settled density of lose fill insulation must be determined.... This section describes the procedure for determining the settled density of loose fill insulation. (a...

16 CFR 1209.4 - Test procedures for determining settled density.

Code of Federal Regulations, 2014 CFR

2014-01-01

... density. 1209.4 Section 1209.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... procedures for determining settled density. The settled density of lose fill insulation must be determined.... This section describes the procedure for determining the settled density of loose fill insulation. (a...

16 CFR 1209.4 - Test procedures for determining settled density.

Code of Federal Regulations, 2011 CFR

2011-01-01

... density. 1209.4 Section 1209.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... procedures for determining settled density. The settled density of lose fill insulation must be determined.... This section describes the procedure for determining the settled density of loose fill insulation. (a...

16 CFR 1209.4 - Test procedures for determining settled density.

Code of Federal Regulations, 2010 CFR

2010-01-01

... density. 1209.4 Section 1209.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... procedures for determining settled density. The settled density of lose fill insulation must be determined.... This section describes the procedure for determining the settled density of loose fill insulation. (a...

32 CFR 1800.31 - Procedures for business information.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Procedures for business information. 1800.31... Administrative Matters § 1800.31 Procedures for business information. (a) In general. Business information...: Business information means commercial or financial information in which a legal entity has a recognized...

45 CFR 74.71 - Closeout procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., AND COMMERCIAL ORGANIZATIONS After-the-Award Requirements § 74.71 Closeout procedures. (a) Recipients... refund any balances of unobligated cash that HHS has advanced or paid and that is not authorized to be...

15 CFR 14.71 - Closeout procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... COMMERCIAL ORGANIZATIONS After-the-Award Requirements § 14.71 Closeout procedures. (a) Recipients shall... recipient shall promptly refund any balances of unobligated funds that the DoC has advanced or paid and that...

Simple and economic colloidal centrifugation protocols may be incorporated into the clinical equine sperm processing procedure.

PubMed

Gutiérrez-Cepeda, L; Fernández, A; Crespo, F; Gosálvez, J; Serres, C

2011-03-01

For many years in human assisted-reproduction procedures there have been special protocols to prepare and improve sperm quality. Colloidal centrifugation (CC) is a useful technique that has been proved to enhance semen quality by selection of the best spermatozoa for different species. Its use is recommended to improve fertility of subfertile stallions but current CC protocols are clinically complicated in the equine sperm processing technique due to economic and technical difficulties. The aim of this study was to determine the optimal processing procedures to adapt the use of a CC product (EquiPure™) in the equine reproduction industry. A total of nineteen ejaculates were collected from 10 Purebred Spanish Horses (P.R.E horses) using a Missouri artificial vagina. Gel-free semen aliquots were analyzed prior to treatment (control). Semen was subjected to one of six CC protocols with EquiPure™ and centrifuged samples were statistically evaluated by ANOVA and Duncan tests (p<0.05) for sperm quality and recovery rate. We obtained higher values by colloidal centrifugation in LIN, STR and BCF variables and DNA fragmentation index trended to be lower in most of the CC protocols. The studied protocols were shown to be as efficient in improving equine sperm quality as the current commercial EquiPure™, with the added advantage of being much more economical and simple to use. According to these results it seems to be possible to incorporate single layer and or high colloidal centrifugation volume protocols what would make them simple, economic and clinically viable for the equine sperm processing procedure. Copyright © 2011 Elsevier B.V. All rights reserved.

Quasi-isochronous muon collection channels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ankenbrandt, Charles M.; Neuffer, David; Johnson, Rolland P.

2015-04-26

Intense muon beams have many potential commercial and scientific applications, ranging from low-energy investigations of the basic properties of matter using spin resonance to large energy-frontier muon colliders. However, muons originate from a tertiary process that produces a diffuse swarm. To make useful beams, the swarm must be rapidly captured and cooled before the muons decay. In this STTR project a promising new concept for the collection and cooling of muon beams to increase their intensity and reduce their emittances was investigated, namely, the use of a nearly isochronous helical cooling channel (HCC) to facilitate capture of the muons intomore » RF bunches. The muon beam can then be cooled quickly and coalesced efficiently to optimize the luminosity of a muon collider, or could provide compressed muon beams for other applications. Optimal ways to integrate such a subsystem into the rest of a muon collection and cooling system, for collider and other applications, were developed by analysis and simulation. The application of quasi-isochronous helical cooling channels (QIHCC) for RF capture of muon beams was developed. Innovative design concepts for a channel incorporating straight solenoids, a matching section, and an HCC, including RF and absorber, were developed, and its subsystems were simulated. Additionally, a procedure that uses an HCC to combine bunches for a muon collider was invented and simulated. Difficult design aspects such as matching sections between subsystems and intensity-dependent effects were addressed. The bunch recombination procedure was developed into a complete design with 3-D simulations. Bright muon beams are needed for many commercial and scientific reasons. Potential commercial applications include low-dose radiography, muon catalyzed fusion, and the use of muon beams to screen cargo containers for homeland security. Scientific uses include low energy beams for rare process searches, muon spin resonance applications, muon beams for neutrino factories, and muon colliders as Higgs factories or energy-frontier discovery machines.« less

Processing silicon microparticles recycled from wafer waste via Rapid Thermal Process for lithium-ion battery anode materials

NASA Astrophysics Data System (ADS)

Tan, Hui-Gee; Duh, Jenq-Gong

2016-12-01

A vast quantity of waste sludge is generated during the silicon wafers slicing process in semiconductor and photovoltaic industries. Turning the waste powder into high-value products is of strategic importance for industrial processes. The purified Si microparticles (Si-MP) are recycled by a simple and fast procedure, Rapid Thermal Process (RTP). A prominent anodic material of Si-MP/Carbon composite with porous structure is obtained via in-spaced carbonization of water-soluble binder sodium carboxymethyl cellulose during RTP. This strategy provides buffer space, which is constructed by carbon porous continuous conductive framework throughout the entire electrode, to resist local stress and intense volume variation. In addition, a sufficiently electrochemically stable solid-electrolyte interphase layer is accomplished with the coating of SiOx film and amorphous carbon on the surface of Si-MP. Under these circumstances, the enhanced electrodes achieve a first cycle efficiency of approximately 80% and a reversible charge capacity of 800 mAhg-1 over 100 cycles at 0.5 Ag-1 with good retention. Through a green and simple procedure, a remarkable Si-MP embedded carbon-matrix with porous structure is established to achieve commercially high performance Si-MP/C composite anodes and also to resolve the issues of waste disposal.

Sampling procedures for inventory of commercial volume tree species in Amazon Forest.

PubMed

Netto, Sylvio P; Pelissari, Allan L; Cysneiros, Vinicius C; Bonazza, Marcelo; Sanquetta, Carlos R

2017-01-01

The spatial distribution of tropical tree species can affect the consistency of the estimators in commercial forest inventories, therefore, appropriate sampling procedures are required to survey species with different spatial patterns in the Amazon Forest. For this, the present study aims to evaluate the conventional sampling procedures and introduce the adaptive cluster sampling for volumetric inventories of Amazonian tree species, considering the hypotheses that the density, the spatial distribution and the zero-plots affect the consistency of the estimators, and that the adaptive cluster sampling allows to obtain more accurate volumetric estimation. We use data from a census carried out in Jamari National Forest, Brazil, where trees with diameters equal to or higher than 40 cm were measured in 1,355 plots. Species with different spatial patterns were selected and sampled with simple random sampling, systematic sampling, linear cluster sampling and adaptive cluster sampling, whereby the accuracy of the volumetric estimation and presence of zero-plots were evaluated. The sampling procedures applied to species were affected by the low density of trees and the large number of zero-plots, wherein the adaptive clusters allowed concentrating the sampling effort in plots with trees and, thus, agglutinating more representative samples to estimate the commercial volume.

Air travel with known pneumocephalus following outpatient sinus surgery.

PubMed

Willson, Thomas J; Grady, Conor; Braxton, Ernest; Weitzel, Erik

2014-01-01

Intracranial air is a common finding after many neurosurgical procedures and trauma to the head. In patients requiring transport via air to reach a destination there is risk of expansion of the intracranial air and development of neurological complications. Though relatively uncommon after functional endoscopic sinus surgery (FESS), pneumocephalus may be encountered. We describe one of our patients in whom intracranial air was introduced during FESS. Following the procedure she required commercial air transportation from our center to her home. A 45-min commercial flight to the destination was safely completed without the patient experiencing any neurological sequellae. This case highlights the controversy surrounding air travel with pneumocephalus and provides an example of safe commercial air travel after diagnosis of post-FESS pneumocephalus.

16 CFR 1101.52 - Procedure for retraction.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Procedure for retraction. 1101.52 Section... INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Retraction § 1101.52 Procedure for retraction. (a) Initiative. The Commission may retract information under section 6(b)(7) on the...

16 CFR 1101.52 - Procedure for retraction.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Procedure for retraction. 1101.52 Section... INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Retraction § 1101.52 Procedure for retraction. (a) Initiative. The Commission may retract information under section 6(b)(7) on the...

16 CFR 1101.52 - Procedure for retraction.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Procedure for retraction. 1101.52 Section... INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Retraction § 1101.52 Procedure for retraction. (a) Initiative. The Commission may retract information under section 6(b)(7) on the...

16 CFR 1101.52 - Procedure for retraction.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Procedure for retraction. 1101.52 Section... INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Retraction § 1101.52 Procedure for retraction. (a) Initiative. The Commission may retract information under section 6(b)(7) on the...

16 CFR § 1209.4 - Test procedures for determining settled density.

Code of Federal Regulations, 2013 CFR

2013-01-01

... density. § 1209.4 Section § 1209.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER... procedures for determining settled density. The settled density of lose fill insulation must be determined.... This section describes the procedure for determining the settled density of loose fill insulation. (a...

50 CFR 665.965 - Fishing permit procedures and criteria.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 13 2013-10-01 2013-10-01 false Fishing permit procedures and criteria... Rose Atoll Marine National Monument § 665.965 Fishing permit procedures and criteria. (a) Rose Atoll Monument non-commercial fishing permit—(1) Applicability. Both the owner and operator of a vessel used to...

50 CFR 665.965 - Fishing permit procedures and criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Fishing permit procedures and criteria... Rose Atoll Marine National Monument § 665.965 Fishing permit procedures and criteria. (a) Rose Atoll Monument non-commercial fishing permit—(1) Applicability. Both the owner and operator of a vessel used to...

78 FR 72074 - Decision and Order Granting a Waiver to Felix Storch, Inc. (FSI) From the Department of Energy...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-02

... industrial equipment, which includes commercial refrigeration equipment, the focus of this notice.\\1\\ Part C... for commercial refrigeration equipment. (42 U.S.C. 6314(a)(6)(C)) On December 8, 2006, DOE published a final rule adopting test procedures for commercial refrigeration equipment. 71 FR 71340. Title 10 of the...

77 FR 20598 - Defense Federal Acquisition Regulation Supplement: Solicitation Provisions and Contract Clauses...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-05

... commercial items. Time charter acquisitions of vessels are commercial by their very nature. Further, 10 U.S.C... using FAR part 12 procedures for the acquisition of commercial items. This clause implements 10 U.S.C... prescribed in FAR 3.202, to comply with 10 U.S.C. 2207. (ii) Use the clause at 252.203-7000, Requirements...

Robotics in space-age manufacturing

NASA Technical Reports Server (NTRS)

Jones, Chip

1991-01-01

Robotics technologies are developed to improve manufacturing of space hardware. The following applications of robotics are covered: (1) welding for the space shuttle and space station Freedom programs; (2) manipulation of high-pressure water for shuttle solid rocket booster refurbishment; (3) automating the application of insulation materials; (4) precision application of sealants; and (5) automation of inspection procedures. Commercial robots are used for these development programs, but they are teamed with advanced sensors, process controls, and computer simulation to form highly productive manufacturing systems. Many of the technologies are also being actively pursued in private sector manufacturing operations.

The design, development, fabrication and testing of two (2) Non-Spin Platforms, (NSP)

NASA Technical Reports Server (NTRS)

1975-01-01

The non spin platform is a means for achieving the very low acceleration requirements for cost effective space processing experiments on research rocket flights. These platforms have a low initial cost, are re-usable and have extremely low refurbishment cost. In order to attain this goal, commercially available components were used and only the necessary quality control standards were imposed. A detailed system description, the very few design problems encountered, the operational procedures (both pre-flight and post-flight), and the maintenance requirements are described.

Preparation, isolation, and characterization of cutin monomers and oligomers from tomato peels.

PubMed

Osman, S F; Irwin, P; Fett, W F; O'Connor, J V; Parris, N

1999-02-01

Cutin in tomato peels was depolymerized in methanolic base to yield cutin monomers or a mixture of cutin oligomers. These products were isolated by typical solvent extraction methods or by precipitation, and the isolates were characterized by chromatographic and spectroscopic analyses. It was determined that the compositions of the isolates from both isolation procedures were similar, although solvent extraction gave higher yields. However, the precipitation method, which is easy to carry out and avoids the use of undesirable organic solvents, may be preferable in commercial processes for recovering these compounds.

Thermal energy harvesters with piezoelectric or electrostatic transducer

NASA Astrophysics Data System (ADS)

Prokaryn, Piotr; Domański, Krzysztof; Marchewka, Michał; Tomaszewski, Daniel; Grabiec, Piotr; Puscasu, Onoriu; Monfray, Stéphane; Skotnicki, Thomas

2014-08-01

This paper describes the idea of the energy harvester which converts thermal gradient present in environment into electricity. Two kinds of such devices are proposed and their prototypes are shown and discussed. The main parts of harvesters are bimetallic spring, piezoelectric transducer or electrostatic transducer with electret. The applied piezomembrane was commercial available product but electrets was made by authors. In the paper a fabrication procedure of electrets formed by the corona discharge process is described. Devices were compared in terms of generated power, charging current, and the voltage across a storage capacitor.

The effect of standard heat and filtration processing procedures on antimicrobial activity and hydrogen peroxide levels in honey.

PubMed

Chen, Cuilan; Campbell, Leona T; Blair, Shona E; Carter, Dee A

2012-01-01

There is increasing interest in the antimicrobial properties of honey. In most honey types, antimicrobial activity is due to the generation of hydrogen peroxide (H(2)O(2)), but this can vary greatly among samples. Honey is a complex product and other components may modulate activity, which can be further affected by commercial processing procedures. In this study we examined honey derived from three native Australian floral sources that had previously been associated with H(2)O(2)-dependent activity. Antibacterial activity was seen in four red stringybark samples only, and ranged from 12 to 21.1% phenol equivalence against Staphylococcus aureus. Antifungal activity ranged from MIC values of 19-38.3% (w/v) against Candida albicans, and all samples were significantly more active than an osmotically equivalent sugar solution. All honey samples were provided unprocessed and following commercial processing. Processing was usually detrimental to antimicrobial activity, but occasionally the reverse was seen and activity increased. H(2)O(2) levels varied from 0 to 1017 μM, and although samples with no H(2)O(2) had little or no antimicrobial activity, some samples had relatively high H(2)O(2) levels yet no antimicrobial activity. In samples where H(2)O(2) was detected, the correlation with antibacterial activity was greater in the processed than in the unprocessed samples, suggesting other factors present in the honey influence this activity and are sensitive to heat treatment. Antifungal activity did not correlate with the level of H(2)O(2) in honey samples, and overall it appeared that H(2)O(2) alone was not sufficient to inhibit C. albicans. We conclude that floral source and H(2)O(2) levels are not reliable predictors of the antimicrobial activity of honey, which currently can only be assessed by standardized antimicrobial testing. Heat processing should be reduced where possible, and honey destined for medicinal use should be retested post-processing to ensure that activity levels have not changed.

The effect of standard heat and filtration processing procedures on antimicrobial activity and hydrogen peroxide levels in honey

PubMed Central

Chen, Cuilan; Campbell, Leona T.; Blair, Shona E.; Carter, Dee A.

2012-01-01

There is increasing interest in the antimicrobial properties of honey. In most honey types, antimicrobial activity is due to the generation of hydrogen peroxide (H2O2), but this can vary greatly among samples. Honey is a complex product and other components may modulate activity, which can be further affected by commercial processing procedures. In this study we examined honey derived from three native Australian floral sources that had previously been associated with H2O2-dependent activity. Antibacterial activity was seen in four red stringybark samples only, and ranged from 12 to 21.1% phenol equivalence against Staphylococcus aureus. Antifungal activity ranged from MIC values of 19–38.3% (w/v) against Candida albicans, and all samples were significantly more active than an osmotically equivalent sugar solution. All honey samples were provided unprocessed and following commercial processing. Processing was usually detrimental to antimicrobial activity, but occasionally the reverse was seen and activity increased. H2O2 levels varied from 0 to 1017 μM, and although samples with no H2O2 had little or no antimicrobial activity, some samples had relatively high H2O2 levels yet no antimicrobial activity. In samples where H2O2 was detected, the correlation with antibacterial activity was greater in the processed than in the unprocessed samples, suggesting other factors present in the honey influence this activity and are sensitive to heat treatment. Antifungal activity did not correlate with the level of H2O2 in honey samples, and overall it appeared that H2O2 alone was not sufficient to inhibit C. albicans. We conclude that floral source and H2O2 levels are not reliable predictors of the antimicrobial activity of honey, which currently can only be assessed by standardized antimicrobial testing. Heat processing should be reduced where possible, and honey destined for medicinal use should be retested post-processing to ensure that activity levels have not changed. PMID:22866051

16 CFR § 1610.6 - Test procedure.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Test procedure. § 1610.6 Section § 1610.6... FLAMMABILITY OF CLOTHING TEXTILES The Standard § 1610.6 Test procedure. The test procedure is divided into two... according to paragraph (b)(1) of this section. (a) Step 1—Testing in the original state. (1) Tests shall be...

16 CFR 1616.35 - Use of alternate apparatus, procedures, or criteria for testing under the standard.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Use of alternate apparatus, procedures, or...: SIZES 7 THROUGH 14 (FF 5-74) Rules and Regulations § 1616.35 Use of alternate apparatus, procedures, or... apparatus and procedure for performing tests of fabric and garments subject to its provisions. See 16 CFR...

16 CFR 1616.35 - Use of alternate apparatus, procedures, or criteria for testing under the standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Use of alternate apparatus, procedures, or...: SIZES 7 THROUGH 14 (FF 5-74) Rules and Regulations § 1616.35 Use of alternate apparatus, procedures, or... apparatus and procedure for performing tests of fabric and garments subject to its provisions. See 16 CFR...

16 CFR 1615.35 - Use of alternate apparatus, procedures, or criteria for testing under the standard.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Use of alternate apparatus, procedures, or...: SIZES 0 THROUGH 6X (FF 3-71) Rules and Regulations § 1615.35 Use of alternate apparatus, procedures, or... prescribes an apparatus and procedure for performing tests of fabric and garments subject to its provisions...

16 CFR 1615.35 - Use of alternate apparatus, procedures, or criteria for testing under the standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Use of alternate apparatus, procedures, or...: SIZES 0 THROUGH 6X (FF 3-71) Rules and Regulations § 1615.35 Use of alternate apparatus, procedures, or... prescribes an apparatus and procedure for performing tests of fabric and garments subject to its provisions...

Painting with polygons: a procedural watercolor engine.

PubMed

DiVerdi, Stephen; Krishnaswamy, Aravind; Měch, Radomír; Ito, Daichi

2013-05-01

Existing natural media painting simulations have produced high-quality results, but have required powerful compute hardware and have been limited to screen resolutions. Digital artists would like to be able to use watercolor-like painting tools, but at print resolutions and on lower end hardware such as laptops or even slates. We present a procedural algorithm for generating watercolor-like dynamic paint behaviors in a lightweight manner. Our goal is not to exactly duplicate watercolor painting, but to create a range of dynamic behaviors that allow users to achieve a similar style of process and result, while at the same time having a unique character of its own. Our stroke representation is vector based, allowing for rendering at arbitrary resolutions, and our procedural pigment advection algorithm is fast enough to support painting on slate devices. We demonstrate our technique in a commercially available slate application used by professional artists. Finally, we present a detailed analysis of the different vector-rendering technologies available.

Electroless Deposition of Palladium on Macroscopic 3D-Printed Polymers with Dense Microlattice Architectures for Development of Multifunctional Composite Materials

DOE PAGES

Jones, Christopher G.; Mills, Bernice E.; Nishimoto, Ryan K.; ...

2017-10-25

A simple procedure has been developed to create palladium (Pd) films on the surface of several common polymers used in commercial fused deposition modeling (FDM) and stereolithography (SLA) based three-dimensional (3D) printing by an electroless deposition process. The procedure can be performed at room temperature, with equipment less expensive than many 3D printers, and occurs rapidly enough to achieve full coverage of the film within a few minutes. 3D substrates composed of dense logpile or cubic lattices with part sizes in the mm to cm range, and feature sizes as small as 150 μm were designed and printed using commerciallymore » available 3D printers. The deposition procedure was successfully adapted to show full coverage in the lattice substrates. As a result, the ability to design, print, and metallize highly ordered three-dimensional microscale structures could accelerate development of a range of optimized chemical and mechanical engineering systems.« less

Electroless Deposition of Palladium on Macroscopic 3D-Printed Polymers with Dense Microlattice Architectures for Development of Multifunctional Composite Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Christopher G.; Mills, Bernice E.; Nishimoto, Ryan K.

A simple procedure has been developed to create palladium (Pd) films on the surface of several common polymers used in commercial fused deposition modeling (FDM) and stereolithography (SLA) based three-dimensional (3D) printing by an electroless deposition process. The procedure can be performed at room temperature, with equipment less expensive than many 3D printers, and occurs rapidly enough to achieve full coverage of the film within a few minutes. 3D substrates composed of dense logpile or cubic lattices with part sizes in the mm to cm range, and feature sizes as small as 150 μm were designed and printed using commerciallymore » available 3D printers. The deposition procedure was successfully adapted to show full coverage in the lattice substrates. As a result, the ability to design, print, and metallize highly ordered three-dimensional microscale structures could accelerate development of a range of optimized chemical and mechanical engineering systems.« less

47 CFR 22.879 - Interference resolution procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... communications on these systems are not safety related. (b) Interference analysis. Commercial aviation air-ground... Section 22.879 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES PUBLIC MOBILE SERVICES Air-Ground Radiotelephone Service Commercial Aviation Air-Ground Systems § 22.879...

32 CFR 50.6 - Procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Department of Defense OFFICE OF THE SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN PERSONAL COMMERCIAL... give the appearance that the Department of Defense sponsors or endorses any particular company, its... Department of Defense expects voluntary observance of the highest business ethics by commercial enterprises...

32 CFR 50.6 - Procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Department of Defense OFFICE OF THE SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN PERSONAL COMMERCIAL... give the appearance that the Department of Defense sponsors or endorses any particular company, its... Department of Defense expects voluntary observance of the highest business ethics by commercial enterprises...

16 CFR 6.160 - Communications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Communications. 6.160 Section 6.160 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ENFORCEMENT OF....160 Communications. (a) The Commission shall take appropriate steps to ensure effective communication...

16 CFR 6.160 - Communications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Communications. 6.160 Section 6.160 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ENFORCEMENT OF....160 Communications. (a) The Commission shall take appropriate steps to ensure effective communication...

Statistical analyses of commercial vehicle accident factors. Volume 1 Part 1

DOT National Transportation Integrated Search

1978-02-01

Procedures for conducting statistical analyses of commercial vehicle accidents have been established and initially applied. A file of some 3,000 California Highway Patrol accident reports from two areas of California during a period of about one year...

16 CFR 6.160 - Communications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Communications. 6.160 Section 6.160 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ENFORCEMENT OF....160 Communications. (a) The Commission shall take appropriate steps to ensure effective communication...

16 CFR 1702.11 - Product specifications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Product specifications. 1702.11 Section 1702.11 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR 1702.17 - Granting petitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Granting petitions. 1702.17 Section 1702.17 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND...

16 CFR 1702.18 - Denying petitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Denying petitions. 1702.18 Section 1702.18 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND...

16 CFR 1702.17 - Granting petitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Granting petitions. 1702.17 Section 1702.17 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND...

16 CFR 1702.12 - Packaging specifications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Packaging specifications. 1702.12 Section 1702.12 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR 1702.17 - Granting petitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Granting petitions. 1702.17 Section 1702.17 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND...

16 CFR 1702.18 - Denying petitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Denying petitions. 1702.18 Section 1702.18 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND...

16 CFR 1702.18 - Denying petitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Denying petitions. 1702.18 Section 1702.18 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND...

16 CFR 1702.12 - Packaging specifications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Packaging specifications. 1702.12 Section 1702.12 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR 1702.11 - Product specifications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Product specifications. 1702.11 Section 1702.11 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR 1702.18 - Denying petitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Denying petitions. 1702.18 Section 1702.18 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND...

16 CFR 1702.17 - Granting petitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Granting petitions. 1702.17 Section 1702.17 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND...

16 CFR 1702.12 - Packaging specifications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Packaging specifications. 1702.12 Section 1702.12 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR 1702.11 - Product specifications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Product specifications. 1702.11 Section 1702.11 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR 1702.12 - Packaging specifications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Packaging specifications. 1702.12 Section 1702.12 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

PCR detection of psychrophilic Clostridium spp. causing 'blown pack' spoilage of vacuum-packed chilled meats.

PubMed

Broda, D M; Boerema, J A; Bell, R G

2003-01-01

To develop a practical molecular procedure that directly, without isolation, and specifically detects the presence of clostridia which cause 'blown pack' spoilage of vacuum-packed meat. Primer sets and PCR amplification procedures were developed that detect the presence of 16S rDNA gene and/or 16S-23S rDNA internal transcribed spacer fragments of 'blown pack' causing clostridia in meat. The specificity of the developed procedures was evaluated with DNA obtained from close phylogenetic neighbours of 'blown pack' causing clostridia, food clostridia and common meat spoilage microorganisms. The sensitivity of detection was assessed in non-enriched and low-temperature-enriched beef mince inoculated with serially diluted pure cultures of Clostridium estertheticum DSMZ 8809T and Cl. gasigenes DB1AT. The efficacy of detection procedures was evaluated for naturally contaminated vacuum-packed meat samples. Three primer sets, 16SE, 16SDB and EISR, produced amplicons of the expected size with DNA templates from target clostridia, but failed to yield PCR products with DNAs from any other microorganisms tested. With 16SE and 16SDB primers, minimum levels of detection were 104 CFU g(-1) for non-enriched, and 102 CFU g(-1) for enriched meat samples. Based on the established specificity of these primers, as well as DNA sequencing of amplicons, Cl. gasigenes was confirmed as the causative agent of 'blown pack' spoilage in two packs, and Cl. estertheticum as the causative agent in the third. The developed method can be used for rapid detection of 'blown pack' causing clostridia in commercial blown packs, or following low temperature enrichment, for detection of these microorganisms in meat containing as few as 100 clostridial cells per gram. The paper reports practical procedures that can be used for rapid confirmation of the causative agents of clostridial 'blown pack' spoilage in commercial spoiled packs, or for detection of psychrophilic clostridia in epidemiological trace back of 'blown pack' spoilage incidents in meat processing plants.

Aerosol can puncture device operational test plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leist, K.J.

1994-05-03

Puncturing of aerosol cans is performed in the Waste Receiving and Processing Facility Module 1 (WRAP 1) process as a requirement of the waste disposal acceptance criteria for both transuranic (TRU) waste and low-level waste (LLW). These cans have contained such things as paints, lubricating oils, paint removers, insecticides, and cleaning supplies which were used in radioactive facilities. Due to Westinghouse Hanford Company (WHC) Fire Protection concerns of the baseline system`s fire/explosion proof characteristics, a study was undertaken to compare the baseline system`s design to commercially available puncturing devices. While the study found no areas which might indicate a riskmore » of fire or explosion, WHC Fire Protection determined that the puncturing system must have a demonstrated record of safe operation. This could be obtained either by testing the baseline design by an independent laboratory, or by substituting a commercially available device. As a result of these efforts, the commercially available Aerosolv can puncturing device was chosen to replace the baseline design. Two concerns were raised with the system. Premature blinding of the coalescing/carbon filter, due to its proximity to the puncture and draining operation; and overpressurization of the collection bottle due to its small volume and by blinding of the filter assembly. As a result of these concerns, testing was deemed necessary. The objective of this report is to outline test procedures for the Aerosolv.« less

An Assessment of the Influence of the Industry Distribution Chain on the Oxygen Levels in Commercial Modified Atmosphere Packaged Cheddar Cheese Using Non-Destructive Oxygen Sensor Technology.

PubMed

O' Callaghan, Karen A M; Papkovsky, Dmitri B; Kerry, Joseph P

2016-06-20

The establishment and control of oxygen levels in packs of oxygen-sensitive food products such as cheese is imperative in order to maintain product quality over a determined shelf life. Oxygen sensors quantify oxygen concentrations within packaging using a reversible optical measurement process, and this non-destructive nature ensures the entire supply chain can be monitored and can assist in pinpointing negative issues pertaining to product packaging. This study was carried out in a commercial cheese packaging plant and involved the insertion of 768 sensors into 384 flow-wrapped cheese packs (two sensors per pack) that were flushed with 100% carbon dioxide prior to sealing. The cheese blocks were randomly assigned to two different storage groups to assess the effects of package quality, packaging process efficiency, and handling and distribution on package containment. Results demonstrated that oxygen levels increased in both experimental groups examined over the 30-day assessment period. The group subjected to a simulated industrial distribution route and handling procedures of commercial retailed cheese exhibited the highest level of oxygen detected on every day examined and experienced the highest rate of package failure. The study concluded that fluctuating storage conditions, product movement associated with distribution activities, and the possible presence of cheese-derived contaminants such as calcium lactate crystals were chief contributors to package failure.

An Assessment of the Influence of the Industry Distribution Chain on the Oxygen Levels in Commercial Modified Atmosphere Packaged Cheddar Cheese Using Non-Destructive Oxygen Sensor Technology

PubMed Central

O’ Callaghan, Karen A.M.; Papkovsky, Dmitri B.; Kerry, Joseph P.

2016-01-01

The establishment and control of oxygen levels in packs of oxygen-sensitive food products such as cheese is imperative in order to maintain product quality over a determined shelf life. Oxygen sensors quantify oxygen concentrations within packaging using a reversible optical measurement process, and this non-destructive nature ensures the entire supply chain can be monitored and can assist in pinpointing negative issues pertaining to product packaging. This study was carried out in a commercial cheese packaging plant and involved the insertion of 768 sensors into 384 flow-wrapped cheese packs (two sensors per pack) that were flushed with 100% carbon dioxide prior to sealing. The cheese blocks were randomly assigned to two different storage groups to assess the effects of package quality, packaging process efficiency, and handling and distribution on package containment. Results demonstrated that oxygen levels increased in both experimental groups examined over the 30-day assessment period. The group subjected to a simulated industrial distribution route and handling procedures of commercial retailed cheese exhibited the highest level of oxygen detected on every day examined and experienced the highest rate of package failure. The study concluded that fluctuating storage conditions, product movement associated with distribution activities, and the possible presence of cheese-derived contaminants such as calcium lactate crystals were chief contributors to package failure. PMID:27331815

Analysis of commercial bouillons for trace levels of mutagens.

PubMed

Stavric, B; Matula, T I; Klassen, R; Downie, R H

1993-12-01

A new method, developed specifically for the extraction of heterocyclic aromatic amine (HAA) type mutagens from different food matrices, was applied to various forms of commercially available bouillons. This procedure is based on liquid-liquid extraction of the sample at different pH values. Recovery and reproducibility of the procedure was determined by processing spiked samples using a mutagenicity bioassay technique as an endpoint. The mutagenicity was tested in the Salmonella/microsome assay using strain TA98 with metabolic activation. 22 bouillon samples in liquid, cube or powder forms from seven manufacturers were extracted and tested for potential mutagenicity. The mutagenic activity of these samples varied and ranged from non-detectable to about 1200 induced revertants per gram of solid material, with a median value of approximately 250 revertants/g. The mutagenic response appeared to be dependent on the source rather than the type or form of the product tested. A negative response was obtained from only one chicken bouillon, and the highest positive response was obtained from a beef bouillon in cube form. It appears that the average beef sample, regardless of form, has a higher mutagenic potency than chicken or chicken and turkey samples. Overall, the intake of mutagens from commercial bouillons (obtained as cubes, concentrates or dry mixes) to prepare one serving (as bouillon, soup, casseroles, etc.) is considerably less than that reported in the literature for one serving of fried beef or pork. The extractability and mutagenic characteristics of these samples indicate the presence of HAA-type mutagens. Work is in progress to identify the mutagenic factors in bouillons.

Microorganisms in cryopreserved semen and culture media used in the in vitro production (IVP) of bovine embryos identified by matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS).

PubMed

Zampieri, Dávila; Santos, Vanessa G; Braga, Patrícia A C; Ferreira, Christina R; Ballottin, Daniela; Tasic, Ljubica; Basso, Andréa C; Sanches, Bruno V; Pontes, José H F; da Silva, Bárbara Pereira; Garboggini, Fabiana Fantinatti; Eberlin, Marcos N; Tata, Alessandra

2013-09-01

Commercial cattle breeders produce their own herd offspring for the dairy and beef market using artificial insemination. The procedure involves sanitary risks associated with the collection and commercialization of the germplasm, and the in vitro production and transfer of the bovine embryos must be monitored by strict health surveillance. To avoid the spreading of infectious diseases, one must rely on using controlled and monitored germplasm, media, and reagents that are guaranteed free of pathogens. In this article, we investigated the use of a new mass spectrometric approach for fast and accurate identification of bacteria and fungi in bovine semen and in culture media employed in the embryo in vitro production process. The microorganisms isolated from samples obtained in a commercial bovine embryo IVP setting were identified in a few minutes by their conserved peptide/protein profile, obtained applying matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS), matched against a commercial database. The successful microorganisms MS identification has been confirmed by DNA amplification and sequencing. Therefore, the MS technique seems to offer a powerful tool for rapid and accurate microorganism identification in semen and culture media samples. Copyright © 2013 Elsevier Inc. All rights reserved.

Pre-Study Walkthrough with a Commercial Pilot for a Preliminary Single Pilot Operations Experiment

NASA Technical Reports Server (NTRS)

O'Connor-Dreher, Ryan; Roberts, Z.; Ziccardi, J.; Vu, K-P. L.; Strybel, T.; Koteskey, Robert William; Lachter, Joel B.; Vi Dao, Quang; Johnson, Walter W.; Battiste, V.

2013-01-01

The number of crew members in commercial flights has decreased to two members, down from the five-member crew required 50 years ago. One question of interest is whether the crew should be reduced to one pilot. In order to determine the critical factors involved in safely transitioning to a single pilot, research must examine whether any performance deficits arise with the loss of a crew member. With a concrete understanding of the cognitive and behavioral role of a co-pilot, aeronautical technologies and procedures can be developed that make up for the removal of the second aircrew member. The current project describes a pre-study walkthrough process that can be used to help in the development of scenarios for testing future concepts and technologies for single pilot operations. Qualitative information regarding the tasks performed by the pilots can be extracted with this technique and adapted for future investigations of single pilot operations.

A Study of Information Content in the U.S. Television Commercials: Has It Become Less Informative but More Creative?

ERIC Educational Resources Information Center

Ng, Daniel; Supaporn, Potibut

A study investigated the trend of current U.S. television commercial informativeness by comparing the results with Alan Resnik and Bruce Stern's previous benchmark study conducted in 1977. A systematic random sampling procedure was used to select viewing dates and times of commercials from the three national networks. Ultimately, a total of 550…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beavin, P. Jr.

A previously published method for determining zirconium in antiperspirant aerosols was collaboratively studied by 7 laboratories. The method consists of 2 procedures: a rapid dilution procedure for soluble zirconium compounds or a lengthier fusion procedure for total zirconium followed by colorimetric determination. The collaborators were asked to perform the following: Spiking materials representing 4 levels of soluble zirconium were added to weighed portions of a zirconium-free cream base concentrate and the portions were assayed by the dilution procedure. Spiking materials representing 4 levels of zirconium in either the soluble or the insoluble form (or as a mixture) were also addedmore » to portions of the same concentrate and these portions were assayed by the fusion procedure. They were also asked to concentrate and assay, by both procedures, 2 cans each of 2 commercial aerosol antiperspirants containing zirconyl hydroxychloride. The average percent recoveries and standard deviations for spiked samples were 99.8-100.2 and 1.69-2.71, respectively, for soluble compounds determined by the dilution procedure, and 93.8-97.4 and 3.09-4.78, respectively, for soluble and/or insoluble compounds determined by the fusion procedure. The average perent zirconium found by the dilution procedure in the 2 commercial aerosol products was 0.751 and 0.792. Insufficient collaborative results were received for the fusion procedure for statistical evaluation. The dilution procedure has been adopted as official first action.« less

16 CFR 1512.18 - Tests and test procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... plane containing both wheels and the centerlines of the down tube and seat mast. (ii) Post test: The... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Tests and test procedures. 1512.18 Section... REGULATIONS REQUIREMENTS FOR BICYCLES Regulations § 1512.18 Tests and test procedures. (a) Sharp edge test...

16 CFR 1512.18 - Tests and test procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... plane containing both wheels and the centerlines of the down tube and seat mast. (ii) Post test: The... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Tests and test procedures. 1512.18 Section... REGULATIONS REQUIREMENTS FOR BICYCLES Regulations § 1512.18 Tests and test procedures. (a) Sharp edge test...

16 CFR 1512.18 - Tests and test procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... seat mast. (ii) Post test: The optical axis of the reflector shall remain parallel within 5° to the... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Tests and test procedures. 1512.18 Section... REGULATIONS REQUIREMENTS FOR BICYCLES Regulations § 1512.18 Tests and test procedures. (a) Sharp edge test...

16 CFR 1512.18 - Tests and test procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... seat mast. (ii) Post test: The optical axis of the reflector shall remain parallel within 5° to the... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Tests and test procedures. 1512.18 Section... REGULATIONS REQUIREMENTS FOR BICYCLES Regulations § 1512.18 Tests and test procedures. (a) Sharp edge test...

16 CFR § 1512.18 - Tests and test procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of the down tube and seat mast. (ii) Post test: The optical axis of the reflector shall remain... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Tests and test procedures. § 1512.18... ACT REGULATIONS REQUIREMENTS FOR BICYCLES Regulations § 1512.18 Tests and test procedures. (a) Sharp...

16 CFR 1610.33 - Test procedures for textile fabrics and film.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Test procedures for textile fabrics and film... for textile fabrics and film. (a)(1) All textile fabrics (except those with a nitro-cellulose fiber... under the procedures outlined in part 1611, Standard for the Flammability of Vinyl Plastic Film, and if...

16 CFR 1610.33 - Test procedures for textile fabrics and film.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Test procedures for textile fabrics and film... for textile fabrics and film. (a)(1) All textile fabrics (except those with a nitro-cellulose fiber... under the procedures outlined in part 1611, Standard for the Flammability of Vinyl Plastic Film, and if...

16 CFR 1610.33 - Test procedures for textile fabrics and film.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test procedures for textile fabrics and film... for textile fabrics and film. (a)(1) All textile fabrics (except those with a nitro-cellulose fiber... under the procedures outlined in part 1611, Standard for the Flammability of Vinyl Plastic Film, and if...

16 CFR 1611.33 - Test procedures for textile fabrics and film.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test procedures for textile fabrics and film... REGULATIONS STANDARD FOR THE FLAMMABILITY OF VINYL PLASTIC FILM Rules and Regulations § 1611.33 Test procedures for textile fabrics and film. (a)(1) All textile fabrics (except those with a nitro-cellulose...

16 CFR 1611.33 - Test procedures for textile fabrics and film.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Test procedures for textile fabrics and film... REGULATIONS STANDARD FOR THE FLAMMABILITY OF VINYL PLASTIC FILM Rules and Regulations § 1611.33 Test procedures for textile fabrics and film. (a)(1) All textile fabrics (except those with a nitro-cellulose...

16 CFR 1611.33 - Test procedures for textile fabrics and film.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Test procedures for textile fabrics and film... REGULATIONS STANDARD FOR THE FLAMMABILITY OF VINYL PLASTIC FILM Rules and Regulations § 1611.33 Test procedures for textile fabrics and film. (a)(1) All textile fabrics (except those with a nitro-cellulose...

16 CFR § 1101.52 - Procedure for retraction.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Procedure for retraction. § 1101.52 Section... REGULATIONS INFORMATION DISCLOSURE UNDER SECTION 6(b) OF THE CONSUMER PRODUCT SAFETY ACT Retraction § 1101.52 Procedure for retraction. (a) Initiative. The Commission may retract information under section 6(b)(7) on...

16 CFR 1510.4 - Test procedure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test procedure. 1510.4 Section 1510.4... REQUIREMENTS FOR RATTLES § 1510.4 Test procedure. Place the test fixture shown in Figure 1 on a horizontal plane surface. Under its own weight and in a non-compressed state apply any portion of the test sample...

16 CFR 1631.4 - Test procedure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test procedure. 1631.4 Section 1631.4... SURFACE FLAMMABILITY OF SMALL CARPETS AND RUGS (FF 2-70) The Standard § 1631.4 Test procedure. (a) Apparatus—(1) Test chamber. The test chamber shall consist of an open top hollow cube made of noncombustible...

16 CFR 1630.4 - Test procedure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test procedure. 1630.4 Section 1630.4... SURFACE FLAMMABILITY OF CARPETS AND RUGS (FF 1-70) The Standard § 1630.4 Test procedure. (a) Apparatus—(1) Test chamber. The test chamber shall consist of an open top hollow cube made of noncombustible material...

16 CFR 1615.4 - Test procedure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Test procedure. 1615.4 Section 1615.4... FLAMMABILITY OF CHILDREN'S SLEEPWEAR: SIZES 0 THROUGH 6X (FF 3-71) The Standard § 1615.4 Test procedure. (a) Apparatus—(1) Test chamber. The test chamber shall be a steel cabinet with inside dimensions of 32.9 cm...

16 CFR 1610.33 - Test procedures for textile fabrics and film.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Test procedures for textile fabrics and film... for textile fabrics and film. (a)(1) All textile fabrics (except those with a nitro-cellulose fiber... under the procedures outlined in part 1611, Standard for the Flammability of Vinyl Plastic Film, and if...

16 CFR 1611.33 - Test procedures for textile fabrics and film.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Test procedures for textile fabrics and film... REGULATIONS STANDARD FOR THE FLAMMABILITY OF VINYL PLASTIC FILM Rules and Regulations § 1611.33 Test procedures for textile fabrics and film. (a)(1) All textile fabrics (except those with a nitro-cellulose...

50 CFR 665.935 - Fishing permit procedures and criteria.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 13 2013-10-01 2013-10-01 false Fishing permit procedures and criteria... Pacific Remote Islands Marine National Monument § 665.935 Fishing permit procedures and criteria. (a) Non-commercial fishing—(1) Applicability. Except as provided in section 665.934(d), a vessel that is used to non...

50 CFR 665.935 - Fishing permit procedures and criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Fishing permit procedures and criteria... Pacific Remote Islands Marine National Monument § 665.935 Fishing permit procedures and criteria. (a) Non-commercial fishing—(1) Applicability. Except as provided in section 665.934(d), a vessel that is used to non...

46 CFR 4.06-50 - Specimen analysis and follow-up procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... to develop all relevant information and to produce a complete analysis report. (b) Reports shall be... 46 Shipping 1 2011-10-01 2011-10-01 false Specimen analysis and follow-up procedures. 4.06-50... Involving Vessels in Commercial Service § 4.06-50 Specimen analysis and follow-up procedures. (a) Each...

46 CFR 4.06-50 - Specimen analysis and follow-up procedures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to develop all relevant information and to produce a complete analysis report. (b) Reports shall be... 46 Shipping 1 2012-10-01 2012-10-01 false Specimen analysis and follow-up procedures. 4.06-50... Involving Vessels in Commercial Service § 4.06-50 Specimen analysis and follow-up procedures. (a) Each...

16 CFR 16.16 - Compensation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Compensation. 16.16 Section 16.16 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.16 Compensation. (a) Committee members. Unless otherwise provided by law, the Commission...

16 CFR 16.6 - Charter.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Charter. 16.6 Section 16.6 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.6 Charter. (a) No advisory committee established, utilized, reestablished or renewed by the...

16 CFR 1.42 - Notice to Commission.

Code of Federal Regulations, 2010 CFR

2010-01-01

... information as to its organization, business, conduct, practices, management, and relation to other... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Notice to Commission. 1.42 Section 1.42 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL...

16 CFR 0.9 - Organization structure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Organization structure. 0.9 Section 0.9 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.9 Organization structure. The Federal Trade Commission comprises the following principal units...

16 CFR 0.4 - Laws administered.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Laws administered. 0.4 Section 0.4 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.4 Laws administered. The Commission exercises enforcement and administrative authority under the...

16 CFR 0.4 - Laws administered.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Laws administered. 0.4 Section 0.4 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.4 Laws administered. The Commission exercises enforcement and administrative authority under the...

16 CFR 0.4 - Laws administered.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Laws administered. 0.4 Section 0.4 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.4 Laws administered. The Commission exercises enforcement and administrative authority under the...

16 CFR 5.52 - Nonpublic proceedings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Nonpublic proceedings. 5.52 Section 5.52 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE STANDARDS OF CONDUCT Disciplinary Actions Concerning Postemployment Conflict of Interest § 5.52 Nonpublic proceedings...

16 CFR 5.53 - Initiation of investigation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Initiation of investigation. 5.53 Section 5.53 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE STANDARDS OF CONDUCT Disciplinary Actions Concerning Postemployment Conflict of Interest § 5.53 Initiation...

16 CFR 0.4 - Laws administered.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Laws administered. 0.4 Section 0.4 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.4 Laws administered. The Commission exercises enforcement and administrative authority under the...

50 CFR 13.11 - Application procedures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Rescue Center Program 50 CFR 23 No fee CITES Registration of Commercial Breeding Operations for Appendix—I Wildlife 50 CFR 23 100 —Renewal of Registration of Commercial Breeding Operations for Appendix-I..., POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS...

16 CFR 3.22 - Motions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Commission so orders. (c) Content. All written motions shall state the particular order, ruling, or action... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Motions. 3.22 Section 3.22 Commercial... ADJUDICATIVE PROCEEDINGS Prehearing Procedures; Motions; Interlocutory Appeals; Summary Decisions § 3.22...

16 CFR 3.22 - Motions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Commission so orders. (c) Content. All written motions shall state the particular order, ruling, or action... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Motions. 3.22 Section 3.22 Commercial... ADJUDICATIVE PROCEEDINGS Prehearing Procedures; Motions; Interlocutory Appeals; Summary Decisions § 3.22...

Monitor for Sterilization Procedures

DTIC Science & Technology

2001-10-25

were tested using ampules of Bacillus stearothermophilus spores commercially manufactured by Barnstead/Thermolyne for testing sterilization procedures...Monitor for Sterilization Procedures F. Cleary1,2, H.-Y. Mason2, C. Estes2, A. Duncan2, W. Ellis, Jr.2 and L. Powers2 1Moses Brown High School...accurate determination of the efficacy of sterilization procedures is demonstrated using a hand-held instrument based on the intrinsic fluorescence of

Testing linen disinfection procedures in practice with phage-charged-bioindicators.

PubMed

Gerhardts, Anja; Mucha, Helmut; Höfer, Dirk

2012-01-01

Disinfecting laundry processes are essential to avoid contamination of laundering machines and linen during commercial laundry reprocessing in the health care sector. Recently a bacteriophage-charged bioindicator has been developed using MS2 as surrogate virus for testing of low-temperature disinfecting laundry processing on efficacy against viruses related to practice. This paper therefore aims to investigate application of MS2-bioindicators in chemothermal processes under practical conditions (phase 2/step 2) and in practice (phase 3). The experimental design was developed and modified according to the German Society for Hygiene and Microbiology (DGHM) Standard Methods for Testing Chemical Disinfection Processes. Tests under practical conditions were performed at 60 degrees C and 70 degrees C. Additional tests in tunnel washers were carried out at 60 degrees C and 70 degrees C. In all experiments validated disinfecting laundry processes, recommended for bactericidal and virucidal performance (categories A and B), were applied. The results show a temperature-dependent gradual efficacy against the test virus MS2 up to reduction values of more than 8 log10-steps. Therefore MS2-bioindicators prove to be suitable as a tool to determine the performance of disinfection procedures against viruses in practice. Phage-charged bioindicators may be a tool to provide further insights into the reliability of antiviral laundry processes for health care quality management and for infection control.

Improved Equivalent Linearization Implementations Using Nonlinear Stiffness Evaluation

NASA Technical Reports Server (NTRS)

Rizzi, Stephen A.; Muravyov, Alexander A.

2001-01-01

This report documents two new implementations of equivalent linearization for solving geometrically nonlinear random vibration problems of complicated structures. The implementations are given the acronym ELSTEP, for "Equivalent Linearization using a STiffness Evaluation Procedure." Both implementations of ELSTEP are fundamentally the same in that they use a novel nonlinear stiffness evaluation procedure to numerically compute otherwise inaccessible nonlinear stiffness terms from commercial finite element programs. The commercial finite element program MSC/NASTRAN (NASTRAN) was chosen as the core of ELSTEP. The FORTRAN implementation calculates the nonlinear stiffness terms and performs the equivalent linearization analysis outside of NASTRAN. The Direct Matrix Abstraction Program (DMAP) implementation performs these operations within NASTRAN. Both provide nearly identical results. Within each implementation, two error minimization approaches for the equivalent linearization procedure are available - force and strain energy error minimization. Sample results for a simply supported rectangular plate are included to illustrate the analysis procedure.

7 CFR 1000.19 - Commercial food processing establishment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true Commercial food processing establishment. 1000.19... FEDERAL MILK MARKETING ORDERS Definitions § 1000.19 Commercial food processing establishment. Commercial food processing establishment means any facility, other than a milk plant, to which fluid milk products...

7 CFR 1000.19 - Commercial food processing establishment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 9 2012-01-01 2012-01-01 false Commercial food processing establishment. 1000.19... FEDERAL MILK MARKETING ORDERS Definitions § 1000.19 Commercial food processing establishment. Commercial food processing establishment means any facility, other than a milk plant, to which fluid milk products...

7 CFR 1000.19 - Commercial food processing establishment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 9 2011-01-01 2011-01-01 false Commercial food processing establishment. 1000.19... FEDERAL MILK MARKETING ORDERS Definitions § 1000.19 Commercial food processing establishment. Commercial food processing establishment means any facility, other than a milk plant, to which fluid milk products...

7 CFR 1000.19 - Commercial food processing establishment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 9 2013-01-01 2013-01-01 false Commercial food processing establishment. 1000.19... FEDERAL MILK MARKETING ORDERS Definitions § 1000.19 Commercial food processing establishment. Commercial food processing establishment means any facility, other than a milk plant, to which fluid milk products...

7 CFR 1000.19 - Commercial food processing establishment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 9 2014-01-01 2013-01-01 true Commercial food processing establishment. 1000.19... FEDERAL MILK MARKETING ORDERS Definitions § 1000.19 Commercial food processing establishment. Commercial food processing establishment means any facility, other than a milk plant, to which fluid milk products...

A simple, convenient method to synthesize cobalamins: synthesis of homocysteinylcobalamin, N -acetylcysteinylcobalamin, 2-N -acetylamino-2-carbomethoxyethanethiolatocobalamin, sulfitocobalamin and nitrocobalamin†

PubMed Central

Suarez-Moreira, Edward; Hannibal, Luciana; Smith, Clyde A.; Chavez, Roberto A.; Jacobsen, Donald W.

2009-01-01

Glutathionylcobalamin, nitrocobalamin and sulfitocobalamin are important cobalamin metabolites isolable from human tissues. Herein we demonstrate that a procedure used to synthesize and isolate γ-glutamylcysteinylcobalamin and glutathionylcobalamin in aqueous solution in high yield and purity can be used to synthesize other novel, biologically relevant thiolatocobalamins, including D,L-homocysteinylcobalamin, N-acetyl-L-cysteinylcobalamin (Na+ salt) and 2-N-acetylamino-2-carbomethoxy-L-ethanethiolatocobalamin, as well as other non-alkylcobalamins, such as sulfitocobalamin (Na+ salt) and nitrocobalamin. This uncomplicated, general procedure will assist researchers in identifying unknown cobalamin metabolites isolated from biological samples, and researchers interested in studying the uptake and intracellular cobalamin processing mechanisms utilizing non-alkylcobalamin derivatives that are not yet commercially available. The X-ray structure and XAS spectrum of N-acetyl-L-cysteinylcobalamin are also presented. PMID:17088966

Plasma-sprayed self-lubricating coatings

NASA Technical Reports Server (NTRS)

Nakamura, H. H.; Logan, W. R.; Harada, Y.

1982-01-01

One of the most important criterion for acceptable commercial application of a multiple phase composition is uniformity and reproducibility. This means that the performance characteristics of the coat - e.g., its lubricating properties, bond strength to the substrate, and thermal properties - can be readily predicted to give a desired performance. The improvement of uniformity and reproducibility of the coats, the oxidation behavior at three temperature ranges, the effect of bond coat and the effect of preheat treatment as measured by adhesive strength tests, coating examination procedures, and physical property measurements were studied. The following modifications improved the uniformity and reproducibility: (1) changes and closer control in the particle size range of the raw materials used, (2) increasing the binder content from 3.2% to 4.1% (dried weight), and (3) analytical processing procedures using step by step checking to assure consistency.

Agricultural areas in potentially contaminated sites: characterization, risk, management.

PubMed

Vanni, Fabiana; Scaini, Federica; Beccaloni, Eleonora

2016-01-01

In Italy, the current legislation for contaminants in soils provides two land uses: residential/public or private gardens and commercial/industrial; there are not specific reference values for agricultural soils, even if a special decree has been developed and is currently going through the legislative approval process. The topic of agricultural areas is relevant, also in consideration of their presence near potentially contaminated sites. Aim and results. In this paper, contamination sources and transport modes of contaminants from sources to the target in agricultural areas are examined and a suitable "conceptual model" to define appropriate characterization methods and risk assessment procedures is proposed. These procedures have already been used by the National Institute of Health in various Italian areas characterized by different agricultural settings. Finally, specific remediation techniques are suggested to preserve soil resources and, if possible, its particular land use.

16 CFR 1000.5 - Petitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Petitions. 1000.5 Section 1000.5 Commercial... Petitions. Any interested person may petition the Commission to issue, amend, or revoke a rule or regulation... Highway, Bethesda, Maryland 20814. Petitions must comply with the Commission's procedure for petitioning...

16 CFR 16.4 - Advisory Committee Management Officer.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Advisory Committee Management Officer. 16.4 Section 16.4 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.4 Advisory Committee Management Officer. (a) The Commission shall...

16 CFR 16.4 - Advisory Committee Management Officer.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Advisory Committee Management Officer. 16.4 Section 16.4 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.4 Advisory Committee Management Officer. (a) The Commission shall...

16 CFR 16.4 - Advisory Committee Management Officer.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Advisory Committee Management Officer. 16.4 Section 16.4 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.4 Advisory Committee Management Officer. (a) The Commission shall...

16 CFR 16.4 - Advisory Committee Management Officer.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Advisory Committee Management Officer. 16.4 Section 16.4 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.4 Advisory Committee Management Officer. (a) The Commission shall...

Concepts in health evaluation of commercial and industrial chemicals

NASA Technical Reports Server (NTRS)

Mcnamara, B. P.

1975-01-01

A method is described for determining no toxic effect exposure levels based on short-term testing of industrial and commercial chemicals. Procedures for monitoring all organs and body functions for the presence or absence of toxicological effects are demonstrated using various laboratory animals.

16 CFR 16.13 - Renewal of advisory committees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Renewal of advisory committees. 16.13 Section 16.13 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.13 Renewal of advisory committees. (a) Any advisory committee...

16 CFR 16.12 - Termination of advisory committees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Termination of advisory committees. 16.12 Section 16.12 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.12 Termination of advisory committees. Any advisory committee shall...

16 CFR 16.14 - Amendments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Amendments. 16.14 Section 16.14 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.14 Amendments. (a) The charter of an advisory committee may be amended when the Commission...

16 CFR 16.3 - Policy.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Policy. 16.3 Section 16.3 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.3 Policy. (a) The Commission's policy shall be to: (1) Establish an advisory committee only...

16 CFR 16.4 - Advisory Committee Management Officer.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Advisory Committee Management Officer. 16.4 Section 16.4 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.4 Advisory Committee Management Officer. (a) The Commission shall...

16 CFR 16.11 - Annual comprehensive review.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Annual comprehensive review. 16.11 Section 16.11 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.11 Annual comprehensive review. (a) The Commission shall conduct an...

47 CFR 90.5 - Other applicable rule parts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... MOBILE RADIO SERVICES General Information § 90.5 Other applicable rule parts. Other Commission rule parts..., and treaties. This part also contains standards and procedures concerning marketing of radio frequency... contains rules relating to commercial mobile radio services. (i) Part 20 which governs commercial mobile...

16 CFR 5.62 - Hearing rights of respondent.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Hearing rights of respondent. 5.62 Section 5.62 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE STANDARDS OF CONDUCT Disciplinary Actions Concerning Postemployment Conflict of Interest § 5.62 Hearing...

16 CFR 5.66 - Commission decision and reconsideration.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Commission decision and reconsideration. 5.66 Section 5.66 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE STANDARDS OF CONDUCT Disciplinary Actions Concerning Postemployment Conflict of Interest § 5.66...

16 CFR 5.51 - Scope and applicability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Scope and applicability. 5.51 Section 5.51 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE STANDARDS OF CONDUCT Disciplinary Actions Concerning Postemployment Conflict of Interest § 5.51 Scope and applicability...

16 CFR 5.55 - Conduct of investigation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Conduct of investigation. 5.55 Section 5.55 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE STANDARDS OF CONDUCT Disciplinary Actions Concerning Postemployment Conflict of Interest § 5.55 Conduct of...

16 CFR 6.110 - Self-evaluation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Self-evaluation. 6.110 Section 6.110 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ENFORCEMENT OF....110 Self-evaluation. (a) The Commission shall, by February 1, 1989, evaluate its current policies and...

16 CFR 6.110 - Self-evaluation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Self-evaluation. 6.110 Section 6.110 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ENFORCEMENT OF....110 Self-evaluation. (a) The Commission shall, by February 1, 1989, evaluate its current policies and...

16 CFR 6.110 - Self-evaluation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Self-evaluation. 6.110 Section 6.110 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ENFORCEMENT OF....110 Self-evaluation. (a) The Commission shall, by February 1, 1989, evaluate its current policies and...

16 CFR 5.64 - Initial decision.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Initial decision. 5.64 Section 5.64 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE STANDARDS OF... this subpart, except that the determination of the Administrative Law Judge must be supported by a...

16 CFR 5.59 - Presiding official.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Presiding official. 5.59 Section 5.59 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE STANDARDS OF... Chief Administrative Law Judge, who shall appoint an Administrative Law Judge to preside over the...

19 CFR 151.52 - Sampling procedures.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... Representative commercial moisture and assay samples shall be taken under Customs supervision for testing by the Customs laboratory. The samples used for the moisture test shall be representative of the shipment at the... verified commercial moisture sample and prepared assay sample certified to be representative of the...

16 CFR 1014.12 - Specific exemptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Specific exemptions. 1014.12 Section 1014.12 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL POLICIES AND PROCEDURES IMPLEMENTING THE PRIVACY ACT OF 1974 § 1014.12 Specific exemptions. (a) Injury information. (1) The Bureau of Epidemiology...

16 CFR § 1702.18 - Denying petitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Denying petitions. § 1702.18 Section § 1702.18 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR 1702.19 - Effect of filing petition.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Effect of filing petition. 1702.19 Section 1702.19 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR § 1702.11 - Product specifications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Product specifications. § 1702.11 Section § 1702.11 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR 1702.19 - Effect of filing petition.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Effect of filing petition. 1702.19 Section 1702.19 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR 1702.19 - Effect of filing petition.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Effect of filing petition. 1702.19 Section 1702.19 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR § 1702.17 - Granting petitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Granting petitions. § 1702.17 Section § 1702.17 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES...

16 CFR 3.34 - Subpoenas.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Subpoenas. 3.34 Section 3.34 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE RULES OF PRACTICE FOR... Secretary, commanding a person to produce and permit inspection and copying of designated books, documents...

75 FR 62639 - Air Ambulance and Commercial Helicopter Operations, Part 91 Helicopter Operations, and Part 135...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

...This proposed rule addresses air ambulance and commercial helicopter operations, part 91 helicopter operations, and load manifest requirements for all part 135 aircraft. From 2002 to 2008, there has been an increase in fatal helicopter air ambulance accidents. To address these safety concerns, the FAA is proposing to implement operational procedures and require additional equipment on board helicopter air ambulances. Many of these proposed requirements currently are found in agency guidance publications and would address National Transportation Safety Board (NTSB) safety recommendations. Some of these safety concerns are not unique to the helicopter air ambulance industry and affect all commercial helicopter operations. Accordingly, the FAA also is proposing to amend regulations pertaining to all commercial helicopter operations conducted under part 135 to include equipment requirements, pilot training, and alternate airport weather minima. The changes are intended to provide certificate holders and pilots with additional tools and procedures that will aid in preventing accidents.

Optimal Synthesis of Compliant Mechanisms using Subdivision and Commercial FEA (DETC2004-57497)

NASA Technical Reports Server (NTRS)

Hull, Patrick V.; Canfield, Stephen

2004-01-01

The field of distributed-compliance mechanisms has seen significant work in developing suitable topology optimization tools for their design. These optimal design tools have grown out of the techniques of structural optimization. This paper will build on the previous work in topology optimization and compliant mechanism design by proposing an alternative design space parameterization through control points and adding another step to the process, that of subdivision. The control points allow a specific design to be represented as a solid model during the optimization process. The process of subdivision creates an additional number of control points that help smooth the surface (for example a C(sup 2) continuous surface depending on the method of subdivision chosen) creating a manufacturable design free of some traditional numerical instabilities. Note that these additional control points do not add to the number of design parameters. This alternative parameterization and description as a solid model effectively and completely separates the design variables from the analysis variables during the optimization procedure. The motivation behind this work is to create an automated design tool from task definition to functional prototype created on a CNC or rapid-prototype machine. This paper will describe the proposed compliant mechanism design process and will demonstrate the procedure on several examples common in the literature.

41 CFR 102-192.55 - Why must we use these commercial payment processes?

Code of Federal Regulations, 2013 CFR

2013-07-01

... commercial payment processes? 102-192.55 Section 102-192.55 Public Contracts and Property Management Federal... 192-MAIL MANAGEMENT Financial Requirements for All Agencies § 102-192.55 Why must we use these commercial payment processes? Federal agencies are required to use commercial payment processes because...

41 CFR 102-192.55 - Why must we use these commercial payment processes?

Code of Federal Regulations, 2014 CFR

2014-01-01

... commercial payment processes? 102-192.55 Section 102-192.55 Public Contracts and Property Management Federal... 192-MAIL MANAGEMENT Financial Requirements for All Agencies § 102-192.55 Why must we use these commercial payment processes? Federal agencies are required to use commercial payment processes because...

41 CFR 102-192.55 - Why must we use these commercial payment processes?

Code of Federal Regulations, 2012 CFR

2012-01-01

... commercial payment processes? 102-192.55 Section 102-192.55 Public Contracts and Property Management Federal... 192-MAIL MANAGEMENT Financial Requirements for All Agencies § 102-192.55 Why must we use these commercial payment processes? Federal agencies are required to use commercial payment processes because...

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

7 CFR 915.141 - Handling avocados for commercial processing into products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Handling avocados for commercial processing into... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.141 Handling avocados for commercial processing into products. (a) No person shall handle any avocados for commercial processing into products...

Calibration of steady-state car-following models using macroscopic loop detector data.

DOT National Transportation Integrated Search

2010-05-01

The paper develops procedures for calibrating the steady-state component of various car following models using : macroscopic loop detector data. The calibration procedures are developed for a number of commercially available : microscopic traffic sim...

Pricing of NASA Space Shuttle transportation system cargo

NASA Technical Reports Server (NTRS)

Hale, C. W.

1979-01-01

A two-part pricing policy is investigated as the most feasible method of pricing the transportation services to be provided by NASA's SSTS. Engineering cost estimates and a deterministic operating cost model generate a data base and develop a procedure for pricing the services of the SSTS. It is expected that the SSTS will have a monopoly on space material processing in areas of crystal growth, glass processing, metallurgical space applications, and biomedical processes using electrophoresis which will require efficient pricing. Pricing problems, the SSTS operating costs based on orbit elevation, number of launch sites, and number of flights, capital costs of the SSTS, research and development costs, allocation of joint transportation costs of the SSTS to a particular space processing activity, and rates for the SSTS are discussed. It is concluded that joint costs for commercial cargoes carried in the SSTS can be most usefully handled by making cost allocations based on proportionate capacity utilization.

Plasma deposition of silver nanoparticles on ultrafiltration membranes: antibacterial and anti-biofouling properties.

PubMed

Cruz, Mercedes Cecilia; Ruano, Gustavo; Wolf, Marcus; Hecker, Dominic; Vidaurre, Elza Castro; Schmittgens, Ralph; Rajal, Verónica Beatriz

2015-02-01

A novel and versatile plasma reactor was used to modify Polyethersulphone commercial membranes. The equipment was applied to: i) functionalize the membranes with low-temperature plasmas, ii) deposit a film of poly(methyl methacrylate) (PMMA) by Plasma Enhanced Chemical Vapor Deposition (PECVD) and, iii) deposit silver nanoparticles (SNP) by Gas Flow Sputtering. Each modification process was performed in the same reactor consecutively, without exposure of the membranes to atmospheric air. Scanning electron microscopy and transmission electron microscopy were used to characterize the particles and modified membranes. SNP are evenly distributed on the membrane surface. Particle fixation and transport inside membranes were assessed before- and after-washing assays by X-ray photoelectron spectroscopy depth profiling analysis. PMMA addition improved SNP fixation. Plasma-treated membranes showed higher hydrophilicity. Anti-biofouling activity was successfully achieved against Gram-positive ( Enterococcus faecalis ) and -negative ( Salmonella Typhimurium) bacteria. Therefore, disinfection by ultrafiltration showed substantial resistance to biofouling. The post-synthesis functionalization process developed provides a more efficient fabrication route for anti-biofouling and anti-bacterial membranes used in the water treatment field. To the best of our knowledge, this is the first report of a gas phase condensation process combined with a PECVD procedure in order to deposit SNP on commercial membranes to inhibit biofouling formation.

Study of the suitability of a commercial hydroxyapatite powder to obtain sintered compacts for medical applications

NASA Astrophysics Data System (ADS)

Palacio, C.; Jaramillo, D.; Correa, S.; Arroyave, M.

2017-06-01

Hydroxyapatite (HA) is a material widely used by the medical community due to its Ca/P ratio is comparable to the Ca/P ratio of bones and teeth, which promotes osteoinduction and osteoconduction processes when in contact with bone tissue, either as volume piece or coating. This work focuses on studying the quality of the commercial HA powder MKnano-#MKN-HXAP-S12 µm, after processing, to obtain sintered compact discs with suitable physical and chemical characteristics for implants applications. The HA powder was processed through calcination, grinding, pressing and sintering to evaluate the effect of such as procedures in the compacts dics quality. The raw powder was characterized by laser diffraction, SEM, XRF, XRD, TGA and DSC while the characteristics of the obtained compact discs were determined by dilatometry and XRD to identify the sintering temperature range, constituent phases, the amorphous content and the crystallinity degree, parameters that allow determining their suitability for implants applications. Although, it was not possible to obtain sintered compacts with the suitable chemical composition and without fractures, this work allowed to identify the parameters that determine the suitability of a HA powder to obtain sintered compacts for medical applications, as well as the characterization protocol that allows the evaluation of such parameters.

Assessment of the potential suitability of selected commercially available enzymes for cleaning-in-place (CIP) in the dairy industry.

PubMed

Boyce, Angela; Piterina, Anna V; Walsh, Gary

2010-10-01

The potential suitability of 10 commercial protease and lipase products for cleaning-in-place (CIP) application in the dairy industry was investigated on a laboratory scale. Assessment was based primarily on the ability of the enzymes to remove an experimentally generated milk fouling deposit from stainless steel (SS) panels. Three protease products were identified as being most suitable for this application on the basis of their cleaning performance at 40 °C, which was comparable to that of the commonly used cleaning agent, 1% NaOH at 60 °C. This was judged by quantification of residual organic matter and protein on the SS surface after cleaning and analysis by laser scanning confocal microscopy (LSCM). Enzyme activity was removed/inactivated under conditions simulating those normally undertaken after cleaning (rinsing with water, acid circulation, sanitation). Preliminary process-scale studies strongly suggest that enzyme-based CIP achieves satisfactory cleaning at an industrial scale. Cost analysis indicates that replacing caustic-based cleaning procedures with biodegradable enzymes operating at lower temperatures would be economically viable. Additional potential benefits include decreased energy and water consumption, improved safety, reduced waste generation, greater compatibility with wastewater treatment processes and a reduction in the environmental impact of the cleaning process.

Plasma deposition of silver nanoparticles on ultrafiltration membranes: antibacterial and anti-biofouling properties

PubMed Central

Cruz, Mercedes Cecilia; Ruano, Gustavo; Wolf, Marcus; Hecker, Dominic; Vidaurre, Elza Castro; Schmittgens, Ralph; Rajal, Verónica Beatriz

2015-01-01

A novel and versatile plasma reactor was used to modify Polyethersulphone commercial membranes. The equipment was applied to: i) functionalize the membranes with low-temperature plasmas, ii) deposit a film of poly(methyl methacrylate) (PMMA) by Plasma Enhanced Chemical Vapor Deposition (PECVD) and, iii) deposit silver nanoparticles (SNP) by Gas Flow Sputtering. Each modification process was performed in the same reactor consecutively, without exposure of the membranes to atmospheric air. Scanning electron microscopy and transmission electron microscopy were used to characterize the particles and modified membranes. SNP are evenly distributed on the membrane surface. Particle fixation and transport inside membranes were assessed before- and after-washing assays by X-ray photoelectron spectroscopy depth profiling analysis. PMMA addition improved SNP fixation. Plasma-treated membranes showed higher hydrophilicity. Anti-biofouling activity was successfully achieved against Gram-positive (Enterococcus faecalis) and -negative (Salmonella Typhimurium) bacteria. Therefore, disinfection by ultrafiltration showed substantial resistance to biofouling. The post-synthesis functionalization process developed provides a more efficient fabrication route for anti-biofouling and anti-bacterial membranes used in the water treatment field. To the best of our knowledge, this is the first report of a gas phase condensation process combined with a PECVD procedure in order to deposit SNP on commercial membranes to inhibit biofouling formation. PMID:26166926

16 CFR § 1611.33 - Test procedures for textile fabrics and film.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Test procedures for textile fabrics and film... FABRICS ACT REGULATIONS STANDARD FOR THE FLAMMABILITY OF VINYL PLASTIC FILM Rules and Regulations § 1611.33 Test procedures for textile fabrics and film. (a)(1) All textile fabrics (except those with a...

16 CFR § 1610.33 - Test procedures for textile fabrics and film.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Test procedures for textile fabrics and film... Test procedures for textile fabrics and film. (a)(1) All textile fabrics (except those with a nitro... of Vinyl Plastic Film, and if such coated fabrics do not exhibit a rate of burning in excess of that...

16 CFR 1615.4 - Test procedure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Test procedure. 1615.4 Section 1615.4... FLAMMABILITY OF CHILDREN'S SLEEPWEAR: SIZES 0 THROUGH 6X (FF 3-71) The Standard § 1615.4 Test procedure. (a) Apparatus—(1) Test chamber. The test chamber shall be a steel cabinet with inside dimensions of 32.9 cm. (12...

Fundamentals and applications of solar energy. Part 2

NASA Astrophysics Data System (ADS)

Faraq, I. H.; Melsheimer, S. S.

Applications of techniques of chemical engineering to the development of materials, production methods, and performance optimization and evaluation of solar energy systems are discussed. Solar thermal storage systems using phase change materials, liquid phase Diels-Alder reactions, aquifers, and hydrocarbon oil were examined. Solar electric systems were explored in terms of a chlorophyll solar cell, the nonequilibrium electric field effects developed at photoelectrode/electrolyte interfaces, and designs for commercial scale processing of solar cells using continuous thin-film coating production methods. Solar coal gasification processes were considered, along with multilayer absorber coatings for solar concentrator receivers, solar thermal industrial applications, the kinetics of anaerobic digestion of crop residues to produce methane, and a procedure for developing a computer simulation of a solar cooling system.

English in the Ecuadorian Commercial Context.

ERIC Educational Resources Information Center

Alm, Cecilia Ovesdotter

2003-01-01

Presents a study completed in Quito, Ecuador that investigates the attitudinal perceptions toward English in advertising in the Ecuadorian commercial context. Findings are the result of four data collection procedures; a questionnaire administered to advertising experts, an analysis of business names in ten shopping centers, an analysis of…

16 CFR 1016.1 - Purpose and policy.

Code of Federal Regulations, 2010 CFR

2010-01-01

... possible. (b) The Commission's policy and responsibility is to conserve the time of its employees for work... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Purpose and policy. 1016.1 Section 1016.1 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL POLICIES AND PROCEDURES FOR INFORMATION...

16 CFR 16.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Purpose and scope. 16.1 Section 16.1 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.1 Purpose and scope. (a) The regulations in this part implement the Federal...

16 CFR 16.15 - Reports of advisory committees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Reports of advisory committees. 16.15 Section 16.15 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.15 Reports of advisory committees. (a) The Commission shall furnish, on...

12 CFR 233.6 - Non-exclusive examples of policies and procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... THE FEDERAL RESERVE SYSTEM (CONTINUED) PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING... determination regarding the risk the commercial customer presents of engaging in an Internet gambling business... that the commercial customer presents a minimal risk of engaging in an Internet gambling business. (ii...

12 CFR 233.6 - Non-exclusive examples of policies and procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... THE FEDERAL RESERVE SYSTEM (CONTINUED) PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING... determination regarding the risk the commercial customer presents of engaging in an Internet gambling business... that the commercial customer presents a minimal risk of engaging in an Internet gambling business. (ii...

12 CFR 233.6 - Non-exclusive examples of policies and procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... THE FEDERAL RESERVE SYSTEM (CONTINUED) PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING... determination regarding the risk the commercial customer presents of engaging in an Internet gambling business... that the commercial customer presents a minimal risk of engaging in an Internet gambling business. (ii...

A summary of the economic analysis concerning the application of Intelligent Transportation Systems/Commercial Vehicle Operations (ITS/CVO) to the Mid-Continent Corridor

DOT National Transportation Integrated Search

1998-08-19

The existing operational procedure of motor carriers and state enforcement agencies have potentially substantial benefits to gain by integrating Intelligent Transportation System technology into their commercial vehicle operations (ITS/CVO). In parti...

16 CFR 5.65 - Review of initial decision.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Review of initial decision. 5.65 Section 5.65 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE... initial decision. Appeals from the initial decision of the Administrative Law Judge or review by the...

16 CFR 2.6 - Notification of purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Notification of purpose. 2.6 Section 2.6 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE NONADJUDICATIVE... which is under investigation and the provisions of law applicable to such violation. [46 FR 26290, May...

16 CFR 1.91 - Authority and purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Authority and purpose. 1.91 Section 1.91 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL... the various laws which the Federal Trade Commission administers. The Commission may in any such survey...

16 CFR 1702.6 - Trade secrets and other confidential information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Trade secrets and other confidential information. 1702.6 Section 1702.6 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION...; PETITION PROCEDURES AND REQUIREMENTS § 1702.6 Trade secrets and other confidential information. Where a...

16 CFR 1702.6 - Trade secrets and other confidential information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Trade secrets and other confidential information. 1702.6 Section 1702.6 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION...; PETITION PROCEDURES AND REQUIREMENTS § 1702.6 Trade secrets and other confidential information. Where a...

16 CFR 1702.6 - Trade secrets and other confidential information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Trade secrets and other confidential information. 1702.6 Section 1702.6 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION...; PETITION PROCEDURES AND REQUIREMENTS § 1702.6 Trade secrets and other confidential information. Where a...

16 CFR 1702.6 - Trade secrets and other confidential information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Trade secrets and other confidential information. 1702.6 Section 1702.6 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION...; PETITION PROCEDURES AND REQUIREMENTS § 1702.6 Trade secrets and other confidential information. Where a...

16 CFR 0.2 - Official address.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Official address. 0.2 Section 0.2 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.2... 20580, unless otherwise specifically directed. The Commission's Web site address is www.ftc.gov. [63 FR...

16 CFR 0.2 - Official address.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Official address. 0.2 Section 0.2 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.2... 20580, unless otherwise specifically directed. The Commission's Web site address is www.ftc.gov. [63 FR...

Minimize Solvent Oxidation with NO X Pre-Scrubbing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sexton, Andrew; Sachde, Darshan; Vance, Austyn

A novel method to remove nitrogen dioxide (NO 2) from the flue gas of coal-fired power plants with CO 2 capture was further developed for commercial implementation. The technology leverages the equipment and chemistry in an existing (sulfur dioxide) SO 2 polishing scrubber upstream of the main CO 2 capture unit to remove the NO 2, preventing degradation of the CO 2 capture solvent and formation of nitrosamines (environmental hazards). The research in this report focuses on further evaluation of the chemical additives and operating conditions associated with the NO 2 removal process to define conditions for commercial scale testingmore » and deployment. Experimental work systematically evaluated a series of potential additives to minimize the oxidation of sulfite in a representative SO 2 pre-scrubber solution (sulfite, in turn, absorbs NO 2). The additive combinations and concentrations were varied alongside important process conditions such as temperature, oxygen concentration, and metals present in solution to mimic the conditions expected in a commercial system. Important results of the parametric experimental work include identifying a new, potent sulfite oxidation inhibitor, revealing the importance of combining inhibitors with metal chelating agents, validation of a low-cost additive process, and development of a new semi-empirical model to represent mechanisms associated with sulfite oxidation. In addition, the experimental work reveled the impact of operating at higher temperatures (representative of a field test unit), which will guide the selection and concertation of additives as well. Engineering analysis found that waste solutions from the pre-scrubber with NO 2 additives may potentially be integrated with existing processes on site (e.g., flue gas desulfurization unit). In addition, techno-economic analysis identified potential net savings as large as $1.30/tonne CO 2 captured and quantified the potential benefit of low cost additive options actively being pursued by the development team. Finally, the experimental results and engineering analysis supported the development of a detailed field testing plan and protocol to evaluate the technology at near-commercial scale. The field test preparation included development of procedures to introduce chemical additives to an existing SO 2 polishing unit and identification of representative flue gas conditions based on a review of existing plants. These activities will have direct bearing on operation and design of commercial units.« less

Towards Autonomous Modular UAV Missions: The Detection, Geo-Location and Landing Paradigm

PubMed Central

Kyristsis, Sarantis; Antonopoulos, Angelos; Chanialakis, Theofilos; Stefanakis, Emmanouel; Linardos, Christos; Tripolitsiotis, Achilles; Partsinevelos, Panagiotis

2016-01-01

Nowadays, various unmanned aerial vehicle (UAV) applications become increasingly demanding since they require real-time, autonomous and intelligent functions. Towards this end, in the present study, a fully autonomous UAV scenario is implemented, including the tasks of area scanning, target recognition, geo-location, monitoring, following and finally landing on a high speed moving platform. The underlying methodology includes AprilTag target identification through Graphics Processing Unit (GPU) parallelized processing, image processing and several optimized locations and approach algorithms employing gimbal movement, Global Navigation Satellite System (GNSS) readings and UAV navigation. For the experimentation, a commercial and a custom made quad-copter prototype were used, portraying a high and a low-computational embedded platform alternative. Among the successful targeting and follow procedures, it is shown that the landing approach can be successfully performed even under high platform speeds. PMID:27827883

Towards Autonomous Modular UAV Missions: The Detection, Geo-Location and Landing Paradigm.

PubMed

Kyristsis, Sarantis; Antonopoulos, Angelos; Chanialakis, Theofilos; Stefanakis, Emmanouel; Linardos, Christos; Tripolitsiotis, Achilles; Partsinevelos, Panagiotis

2016-11-03

Nowadays, various unmanned aerial vehicle (UAV) applications become increasingly demanding since they require real-time, autonomous and intelligent functions. Towards this end, in the present study, a fully autonomous UAV scenario is implemented, including the tasks of area scanning, target recognition, geo-location, monitoring, following and finally landing on a high speed moving platform. The underlying methodology includes AprilTag target identification through Graphics Processing Unit (GPU) parallelized processing, image processing and several optimized locations and approach algorithms employing gimbal movement, Global Navigation Satellite System (GNSS) readings and UAV navigation. For the experimentation, a commercial and a custom made quad-copter prototype were used, portraying a high and a low-computational embedded platform alternative. Among the successful targeting and follow procedures, it is shown that the landing approach can be successfully performed even under high platform speeds.

20 CFR 435.71 - Closeout procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Closeout procedures. 435.71 Section 435.71 Employees' Benefits SOCIAL SECURITY ADMINISTRATION UNIFORM ADMINISTRATIVE REQUIREMENTS FOR GRANTS AND AGREEMENTS WITH INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, OTHER NON-PROFIT ORGANIZATIONS, AND COMMERCIAL...

Field evaluation of flight deck procedures for flying CTAS descents

DOT National Transportation Integrated Search

1997-01-01

Flight deck descent procedures were developed for a field evaluation of the CTAS Descent Advisor conducted in the fall of 1995. During this study, CTAS descent clearances were issued to 185 commercial flights at Denver International Airport. Data col...

Novel Sorbent Development and Evaluation for the Capture of Krypton and Xenon from Nuclear Fuel Reprocessing Off-Gas Streams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Troy G. Garn; Mitchell R. Greenhalgh; Jack D. Law

2013-10-01

The release of volatile radionuclides generated during Used Nuclear Fuel reprocessing in the US will most certainly need to be controlled to meet US regulatory emission limits. A US DOE sponsored Off-Gas Sigma Team has been tasked with a multi-lab collaborative research and development effort to investigate and evaluate emissions and immobilization control technologies for the volatile radioactive species generated from commercial Used Nuclear Fuel (UNF) Reprocessing. Physical Adsorption technology is a simpler and potential economical alternative to cryogenic distillation processes that can be used for the capture of krypton and xenon and has resulted in a novel composite sorbentmore » development procedure using synthesized mordenite as the active material. Utilizing the sorbent development procedure, INL sigma team members have developed two composite sorbents that have been evaluated for krypton and xenon capacities at ambient and 191 K temperature using numerous test gas compositions. Adsorption isotherms have been generated to predict equilibration and maximum capacities enabling modeling to support process equipment scale-up.« less

Novel Sorbent Development and Evaluation for the Capture of Krypton and Xenon from Nuclear Fuel Reprocessing Off-Gas Streams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Troy G. Garn; Mitchell R. Greenhalgh; Jack D. Law

2013-09-01

The release of volatile radionuclides generated during Used Nuclear Fuel reprocessing in the US will most certainly need to be controlled to meet US regulatory emission limits. A US DOE sponsored Off-Gas Sigma Team has been tasked with a multi-lab collaborative research and development effort to investigate and evaluate emissions and immobilization control technologies for the volatile radioactive species generated from commercial Used Nuclear Fuel (UNF) Reprocessing. Physical Adsorption technology is a simpler and potential economical alternative to cryogenic distillation processes that can be used for the capture of krypton and xenon and has resulted in a novel composite sorbentmore » development procedure using synthesized mordenite as the active material. Utilizing the sorbent development procedure, INL sigma team members have developed two composite sorbents that have been evaluated for krypton and xenon capacities at ambient and 191 K temperature using numerous test gas compositions. Adsorption isotherms have been generated to predict equilibration and maximum capacities enabling modeling to support process equipment scale-up.« less

A Highly Flexible, Automated System Providing Reliable Sample Preparation in Element- and Structure-Specific Measurements.

PubMed

Vorberg, Ellen; Fleischer, Heidi; Junginger, Steffen; Liu, Hui; Stoll, Norbert; Thurow, Kerstin

2016-10-01

Life science areas require specific sample pretreatment to increase the concentration of the analytes and/or to convert the analytes into an appropriate form for the detection and separation systems. Various workstations are commercially available, allowing for automated biological sample pretreatment. Nevertheless, due to the required temperature, pressure, and volume conditions in typical element and structure-specific measurements, automated platforms are not suitable for analytical processes. Thus, the purpose of the presented investigation was the design, realization, and evaluation of an automated system ensuring high-precision sample preparation for a variety of analytical measurements. The developed system has to enable system adaption and high performance flexibility. Furthermore, the system has to be capable of dealing with the wide range of required vessels simultaneously, allowing for less cost and time-consuming process steps. However, the system's functionality has been confirmed in various validation sequences. Using element-specific measurements, the automated system was up to 25% more precise compared to the manual procedure and as precise as the manual procedure using structure-specific measurements. © 2015 Society for Laboratory Automation and Screening.

Dairy Equipment Lubrication

NASA Technical Reports Server (NTRS)

1978-01-01

Lake To Lake Dairy Cooperative, Manitowoc, Wisconsin, operates four plants in Wisconsin for processing milk, butter and cheese products from its 1,300 member farms. The large co-op was able to realize substantial savings by using NASA information for improved efficiency in plant maintenance. Under contract to Marshall Space Flight Center, Midwest Research Institute compiled a handbook consolidating information about commercially available lubricants. The handbook details chemical and physical properties, applications, specifications, test procedures and test data for liquid and solid lubricants. Lake To Lake's plant engineer used the handbook to effect savings in maintenance labor and materials costs by reducing the number of lubricants used on certain equipment. Strict U.S. Department of Agriculture and Food and Drug Administration regulations preclude lubrication changes n production equipment, but the co-op's maintenance chief was able to eliminate seven types of lubricants for ancillary equipment, such as compressors and high pressure pumps. Handbook data enabled him to select comparable but les expensive lubricants in the materials consolidation process, and simplified lubrication schedules and procedures. The handbook is in continuing use as a reference source when a new item of equipment is purchased.

Surface mesh to voxel data registration for patient-specific anatomical modeling

NASA Astrophysics Data System (ADS)

de Oliveira, Júlia E. E.; Giessler, Paul; Keszei, András.; Herrler, Andreas; Deserno, Thomas M.

2016-03-01

Virtual Physiological Human (VPH) models are frequently used for training, planning, and performing medical procedures. The Regional Anaesthesia Simulator and Assistant (RASimAs) project has the goal of increasing the application and effectiveness of regional anesthesia (RA) by combining a simulator of ultrasound-guided and electrical nerve-stimulated RA procedures and a subject-specific assistance system through an integration of image processing, physiological models, subject-specific data, and virtual reality. Individualized models enrich the virtual training tools for learning and improving regional anaesthesia (RA) skills. Therefore, we suggest patient-specific VPH models that are composed by registering the general mesh-based models with patient voxel data-based recordings. Specifically, the pelvis region has been focused for the support of the femoral nerve block. The processing pipeline is composed of different freely available toolboxes such as MatLab, the open Simulation framework (SOFA), and MeshLab. The approach of Gilles is applied for mesh-to-voxel registration. Personalized VPH models include anatomical as well as mechanical properties of the tissues. Two commercial VPH models (Zygote and Anatomium) were used together with 34 MRI data sets. Results are presented for the skin surface and pelvic bones. Future work will extend the registration procedure to cope with all model tissue (i.e., skin, muscle, bone, vessel, nerve, fascia) in a one-step procedure and extrapolating the personalized models to body regions actually being out of the captured field of view.

Development of a Flexible Computerized Management Infrastructure for a Commercial Nuclear Power Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ali, Syed Firasat; Hajek, Brian K.; Usman, Shoaib

The report emphasizes smooth transition from paper-based procedure systems (PBPSs) to computer-based procedure systems (CBPSs) for the existing commercial nuclear power plants in the U.S. The expected advantages and of the transition are mentioned including continued, safe and efficient operation of the plants under their recently acquired or desired extended licenses. The report proposes a three-stage survey to aid in developing a national strategic plan for the transition from PBPSs to CBPSs. It also includes a comprehensive questionnaire that can be readily used for the first stage of the suggested survey.

Recent Advances in Food Processing Using High Hydrostatic Pressure Technology.

PubMed

Wang, Chung-Yi; Huang, Hsiao-Wen; Hsu, Chiao-Ping; Yang, Binghuei Barry

2016-01-01

High hydrostatic pressure is an emerging non-thermal technology that can achieve the same standards of food safety as those of heat pasteurization and meet consumer requirements for fresher tasting, minimally processed foods. Applying high-pressure processing can inactivate pathogenic and spoilage microorganisms and enzymes, as well as modify structures with little or no effects on the nutritional and sensory quality of foods. The U.S. Food and Drug Administration (FDA) and the U.S. Department of Agriculture (USDA) have approved the use of high-pressure processing (HPP), which is a reliable technological alternative to conventional heat pasteurization in food-processing procedures. This paper presents the current applications of HPP in processing fruits, vegetables, meats, seafood, dairy, and egg products; such applications include the combination of pressure and biopreservation to generate specific characteristics in certain products. In addition, this paper describes recent findings on the microbiological, chemical, and molecular aspects of HPP technology used in commercial and research applications.

Designing Image Analysis Pipelines in Light Microscopy: A Rational Approach.

PubMed

Arganda-Carreras, Ignacio; Andrey, Philippe

2017-01-01

With the progress of microscopy techniques and the rapidly growing amounts of acquired imaging data, there is an increased need for automated image processing and analysis solutions in biological studies. Each new application requires the design of a specific image analysis pipeline, by assembling a series of image processing operations. Many commercial or free bioimage analysis software are now available and several textbooks and reviews have presented the mathematical and computational fundamentals of image processing and analysis. Tens, if not hundreds, of algorithms and methods have been developed and integrated into image analysis software, resulting in a combinatorial explosion of possible image processing sequences. This paper presents a general guideline methodology to rationally address the design of image processing and analysis pipelines. The originality of the proposed approach is to follow an iterative, backwards procedure from the target objectives of analysis. The proposed goal-oriented strategy should help biologists to better apprehend image analysis in the context of their research and should allow them to efficiently interact with image processing specialists.

A Simple Picaxe Microcontroller Pulse Source for Juxtacellular Neuronal Labelling.

PubMed

Verberne, Anthony J M

2016-10-19

Juxtacellular neuronal labelling is a method which allows neurophysiologists to fill physiologically-identified neurons with small positively-charged marker molecules. Labelled neurons are identified by histochemical processing of brain sections along with immunohistochemical identification of neuropeptides, neurotransmitters, neurotransmitter transporters or biosynthetic enzymes. A microcontroller-based pulser circuit and associated BASIC software script is described for incorporation into the design of a commercially-available intracellular electrometer for use in juxtacellular neuronal labelling. Printed circuit board construction has been used for reliability and reproducibility. The current design obviates the need for a separate digital pulse source and simplifies the juxtacellular neuronal labelling procedure.

[Why is brachytherapy still essential in 2017?

PubMed

Haie-Méder, C; Maroun, P; Fumagalli, I; Lazarescu, I; Dumas, I; Martinetti, F; Chargari, C

2018-05-16

These recent years, brachytherapy has benefited from imaging modalities advances. A more systematic use of tomodensitometric, ultrasonographic and MRI images during brachytherapy procedures has allowed an improvement in target and organs at risk assessment as well as their relationship with the applicators. New concepts integrating tumor regression during treatment have been defined and have been clinically validated. New applicators have been developed and are commercially available. Optimization processes have been developed, integrating hypofractionation modalities leading to tumor control improvement. All these opportunities led to further development of brachytherapy, with indisputable ballistic advantages, especially compared to external irradiation. Copyright © 2018. Published by Elsevier SAS.

Processes and energy costs for mining lunar Helium-3

NASA Technical Reports Server (NTRS)

Sviatoslavsky, I. N.

1988-01-01

Preliminary investigations show that obtaining He-3 from the moon is technically feasible and economically viable. With the exception of beneficiation, the proposed procedures are state of the art. Mass of equipment needed from earth is of some concern, but resupply will eventually be ameliorated by the use of titanium from indigenous ilmenite. A complete energy payback from a D/He-3 fusion reactor utilizing lunar He-3 is approx. 80, providing ample incentive for commercial investment is forthcoming. Byproducts will be of great value to the resupply of a permanent lunar base and enhancement of space exploration.

Identification and Quantitative Analysis of Acetaminophen, Acetylsalicylic Acid, and Caffeine in Commercial Analgesic Tablets by LC-MS

ERIC Educational Resources Information Center

Fenk, Christopher J.; Hickman, Nicole M.; Fincke, Melissa A.; Motry, Douglas H.; Lavine, Barry

2010-01-01

An undergraduate LC-MS experiment is described for the identification and quantitative determination of acetaminophen, acetylsalicylic acid, and caffeine in commercial analgesic tablets. This inquiry-based experimental procedure requires minimal sample preparation and provides good analytical results. Students are provided sufficient background…

10 CFR 431.95 - Materials incorporated by reference.

Code of Federal Regulations, 2010 CFR

2010-01-01

... INDUSTRIAL EQUIPMENT Commercial Air Conditioners and Heat Pumps Test Procedures § 431.95 Materials...) published in 2004, “Standard for Packaged Terminal Air-Conditioners and Heat Pumps,” IBR approved for § 431... for Commercial Air Conditioners and Heat Pumps,” Docket No. EE-RM/TP-99-460, 1000 Independence Avenue...

16 CFR 0.3 - Hours.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Hours. 0.3 Section 0.3 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.3 Hours. Principal and field offices are open on each business day from 8:30 a.m. to 5 p.m. ...

16 CFR 16.10 - Minutes and transcripts of meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Minutes and transcripts of meetings. 16.10 Section 16.10 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ADVISORY COMMITTEE MANAGEMENT § 16.10 Minutes and transcripts of meetings. (a) Detailed minutes of each...

29 CFR 1610.19 - Predisclosure notification procedures for confidential commercial information.

Code of Federal Regulations, 2011 CFR

2011-07-01

... competitive harm. (2) Submitter refers to any person or entity who provides confidential commercial... competitive harm to the submitter; (2) The information was submitted prior to January 1, 1988, the records are... which is likely to cause substantial harm to the submitter's competitive position. (e) Notice of intent...

31 CFR 132.6 - Non-exclusive examples of policies and procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Finance MONETARY OFFICES, DEPARTMENT OF THE TREASURY PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING... determination regarding the risk the commercial customer presents of engaging in an Internet gambling business... that the commercial customer presents a minimal risk of engaging in an Internet gambling business. (ii...

31 CFR 132.6 - Non-exclusive examples of policies and procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Finance MONETARY OFFICES, DEPARTMENT OF THE TREASURY PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING... determination regarding the risk the commercial customer presents of engaging in an Internet gambling business... that the commercial customer presents a minimal risk of engaging in an Internet gambling business. (ii...

31 CFR 132.6 - Non-exclusive examples of policies and procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Finance MONETARY OFFICES, DEPARTMENT OF THE TREASURY PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING... determination regarding the risk the commercial customer presents of engaging in an Internet gambling business... that the commercial customer presents a minimal risk of engaging in an Internet gambling business. (ii...

16 CFR 5.58 - Answer and request for a hearing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Answer and request for a hearing. 5.58 Section 5.58 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE STANDARDS OF CONDUCT Disciplinary Actions Concerning Postemployment Conflict of Interest § 5.58 Answer and...

16 CFR 5.57 - Order to show cause.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Order to show cause. 5.57 Section 5.57 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE STANDARDS OF CONDUCT Disciplinary Actions Concerning Postemployment Conflict of Interest § 5.57 Order to show cause. (a...

16 CFR 0.18 - Bureau of Economics.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Bureau of Economics. 0.18 Section 0.18 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.18 Bureau of Economics. The bureau aids and advises the Commission concerning the economic aspects of...

16 CFR 0.18 - Bureau of Economics.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Bureau of Economics. 0.18 Section 0.18 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.18 Bureau of Economics. The bureau aids and advises the Commission concerning the economic aspects of...

16 CFR 0.18 - Bureau of Economics.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Bureau of Economics. 0.18 Section 0.18 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.18 Bureau of Economics. The bureau aids and advises the Commission concerning the economic aspects of...

16 CFR 0.18 - Bureau of Economics.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Bureau of Economics. 0.18 Section 0.18 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.18 Bureau of Economics. The bureau aids and advises the Commission concerning the economic aspects of...

16 CFR 0.14 - Office of Administrative Law Judges.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Office of Administrative Law Judges. 0.14 Section 0.14 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.14 Office of Administrative Law Judges. Administrative law judges are officials to whom the...

16 CFR 1.23 - Quantity limit rules.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Quantity limit rules. 1.23 Section 1.23 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL... Robinson-Patman Act. These rules have the force and effect of law. [32 FR 8444, June 13, 1967. Redesignated...

16 CFR 2.3 - Policy as to private controversies.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Policy as to private controversies. 2.3 Section 2.3 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE... other action when the alleged violation of law is merely a matter of private controversy and does not...

16 CFR 0.11 - Office of the General Counsel.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Office of the General Counsel. 0.11 Section 0.11 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE ORGANIZATION § 0.11 Office of the General Counsel. The General Counsel is the Commission's chief law officer...

An Analysis of the Effect of Knowledge Management on the Execution of Simplified Acquisition Procedures

DTIC Science & Technology

2012-12-27

of Work UCC Uniform Commercial Code USD(AT&L) Under Secretary of Defense for Acquisition, Technology, and Logistics WBS Work Breakdown Structure...intensive career field. The FAR, the DFARS, and other federal agency supplements of the FAR, the Uniform Commercial Code ( UCC ), installation guidelines

16 CFR § 1702.6 - Trade secrets and other confidential information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Trade secrets and other confidential information. § 1702.6 Section § 1702.6 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON... REQUIREMENTS; PETITION PROCEDURES AND REQUIREMENTS § 1702.6 Trade secrets and other confidential information...

4 CFR 25.11 - Photographs for news, advertising, or commercial purposes.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 4 Accounts 1 2014-01-01 2013-01-01 true Photographs for news, advertising, or commercial purposes. 25.11 Section 25.11 Accounts GOVERNMENT ACCOUNTABILITY OFFICE GENERAL PROCEDURES CONDUCT IN THE GOVERNMENT ACCOUNTABILITY OFFICE BUILDING AND ON ITS GROUNDS § 25.11 Photographs for news, advertising, or...

4 CFR 25.11 - Photographs for news, advertising, or commercial purposes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 4 Accounts 1 2011-01-01 2011-01-01 false Photographs for news, advertising, or commercial purposes. 25.11 Section 25.11 Accounts GOVERNMENT ACCOUNTABILITY OFFICE GENERAL PROCEDURES CONDUCT IN THE GOVERNMENT ACCOUNTABILITY OFFICE BUILDING AND ON ITS GROUNDS § 25.11 Photographs for news, advertising, or...

4 CFR 25.11 - Photographs for news, advertising, or commercial purposes.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 4 Accounts 1 2013-01-01 2013-01-01 false Photographs for news, advertising, or commercial purposes. 25.11 Section 25.11 Accounts GOVERNMENT ACCOUNTABILITY OFFICE GENERAL PROCEDURES CONDUCT IN THE GOVERNMENT ACCOUNTABILITY OFFICE BUILDING AND ON ITS GROUNDS § 25.11 Photographs for news, advertising, or...

4 CFR 25.11 - Photographs for news, advertising, or commercial purposes.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 4 Accounts 1 2012-01-01 2012-01-01 false Photographs for news, advertising, or commercial purposes. 25.11 Section 25.11 Accounts GOVERNMENT ACCOUNTABILITY OFFICE GENERAL PROCEDURES CONDUCT IN THE GOVERNMENT ACCOUNTABILITY OFFICE BUILDING AND ON ITS GROUNDS § 25.11 Photographs for news, advertising, or...

4 CFR 25.11 - Photographs for news, advertising, or commercial purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 4 Accounts 1 2010-01-01 2010-01-01 false Photographs for news, advertising, or commercial purposes. 25.11 Section 25.11 Accounts GOVERNMENT ACCOUNTABILITY OFFICE GENERAL PROCEDURES CONDUCT IN THE GOVERNMENT ACCOUNTABILITY OFFICE BUILDING AND ON ITS GROUNDS § 25.11 Photographs for news, advertising, or...

The Impact of Workplace Learning on Job Satisfaction in Small US Commercial Banks

ERIC Educational Resources Information Center

Rowden, Robert W.; Conine, Clyde T., Jr.

2005-01-01

Purpose: This study aims to examine workplace learning and job satisfaction in small, commercial US banks. Design/methodology/approach: Survey data collection with correlational procedure. Findings: The study found a statistically significant relationship between the workplace learning variables and the job satisfaction variables. Research…

31 CFR 132.6 - Non-exclusive examples of policies and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Finance PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING § 132.6 Non-exclusive examples of policies... regarding the risk the commercial customer presents of engaging in an Internet gambling business and follows... commercial customer presents a minimal risk of engaging in an Internet gambling business. (ii) The...

12 CFR 233.6 - Non-exclusive examples of policies and procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... THE FEDERAL RESERVE SYSTEM PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING (REGULATION GG) § 233... determination regarding the risk the commercial customer presents of engaging in an Internet gambling business... that the commercial customer presents a minimal risk of engaging in an Internet gambling business. (ii...

31 CFR 132.6 - Non-exclusive examples of policies and procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Finance MONETARY OFFICES, DEPARTMENT OF THE TREASURY PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING... determination regarding the risk the commercial customer presents of engaging in an Internet gambling business... that the commercial customer presents a minimal risk of engaging in an Internet gambling business. (ii...

12 CFR 233.6 - Non-exclusive examples of policies and procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... THE FEDERAL RESERVE SYSTEM PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING (REGULATION GG) § 233... determination regarding the risk the commercial customer presents of engaging in an Internet gambling business... that the commercial customer presents a minimal risk of engaging in an Internet gambling business. (ii...

45 CFR 2507.11 - What are the procedures for the release of commercial business information?

Code of Federal Regulations, 2010 CFR

2010-10-01

... commercial business information? 2507.11 Section 2507.11 Public Welfare Regulations Relating to Public... business information? (a) Notification of business submitter. The Corporation shall promptly notify a business submitter of any request for Corporation records containing business information. The notice shall...

10 CFR 431.133 - Materials incorporated by reference.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND INDUSTRIAL EQUIPMENT Automatic Commercial Ice Makers Test Procedures § 431.133 Materials..., (“AHRI 810”), Performance Rating of Automatic Commercial Ice-Makers, March 2011; IBR approved for §§ 431... Automatic Ice Makers, (including Errata Sheets issued April 8, 2010 and April 21, 2010), approved January 28...

10 CFR 431.133 - Materials incorporated by reference.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND INDUSTRIAL EQUIPMENT Automatic Commercial Ice Makers Test Procedures § 431.133 Materials..., (“AHRI 810”), Performance Rating of Automatic Commercial Ice-Makers, March 2011; IBR approved for §§ 431... Automatic Ice Makers, (including Errata Sheets issued April 8, 2010 and April 21, 2010), approved January 28...

16 CFR 1702.10 - Human experimental data involving the testing of human subjects.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Human experimental data involving the testing of human subjects. 1702.10 Section 1702.10 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND REQUIREMENTS § 1702.10 Human experimental data involving...

16 CFR 1702.10 - Human experimental data involving the testing of human subjects.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Human experimental data involving the testing of human subjects. 1702.10 Section 1702.10 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND REQUIREMENTS § 1702.10 Human experimental data involving...

16 CFR 1702.10 - Human experimental data involving the testing of human subjects.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Human experimental data involving the testing of human subjects. 1702.10 Section 1702.10 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND REQUIREMENTS § 1702.10 Human experimental data involving...

16 CFR 1702.10 - Human experimental data involving the testing of human subjects.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Human experimental data involving the testing of human subjects. 1702.10 Section 1702.10 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION... PACKAGING ACT REQUIREMENTS; PETITION PROCEDURES AND REQUIREMENTS § 1702.10 Human experimental data involving...

16 CFR 4.3 - Time.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Time. 4.3 Section 4.3 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE MISCELLANEOUS RULES § 4.3 Time. (a) Computation. Computation of any period of time prescribed or allowed by the rules in this chapter, by order of...

16 CFR 4.3 - Time.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Time. 4.3 Section 4.3 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE MISCELLANEOUS RULES § 4.3 Time. (a) Computation. Computation of any period of time prescribed or allowed by the rules in this chapter, by order of...

16 CFR 4.3 - Time.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Time. 4.3 Section 4.3 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE MISCELLANEOUS RULES § 4.3 Time. (a) Computation. Computation of any period of time prescribed or allowed by the rules in this chapter, by order of...