Presentation of Class 1 designs for a family of commuter airplanes

NASA Technical Reports Server (NTRS)

Creighton, Tom; Dragush, George; Hendrich, Louis; Hensley, Doug; Morgan, Louise; Oxendine, Charles; Remen, John; Robinson, Terry; Russell, Mark; Swift, Jerry

1986-01-01

The Class 1 configuration designs of a family of commuter aircraft are presented. The proposed aircraft will have a capacity of from 25 to 100 passengers. They are to have the following common features: (1) 2 aft fuselage mounted engines; (2) a low wing; (3) a T-tail type empennage; and (4) a tricycle type landing gear. A family concept is introduced to achieve structural, systems and handling quality commonality throughout. Implementing commonality can substantially reduce manufacturing and production costs. By achieving common system designs, maintenance costs can be reduced by permitting airlines to stock a smaller inventory of spares. Therefore, the higher degree of commonality, the lower the direct operating and life cycle costs. The attempt to implement some of the commonality requirements has caused configuration design problems, i.e., the twin-body concept was introduced. Design data are compared to existing aircraft, and the extent of structural, systems and handling qualities achieved are reviewed.

The Development and Nature of Problem-Solving among First-Semester Calculus Students

ERIC Educational Resources Information Center

Dawkins, Paul Christian; Epperson, James A. Mendoza

2014-01-01

This study investigates interactions between calculus learning and problem-solving in the context of two first-semester undergraduate calculus courses in the USA. We assessed students' problem-solving abilities in a common US calculus course design that included traditional lecture and assessment with problem-solving-oriented labs. We investigate…

Guidelines for glycol dehydrator design; Part 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manning, W.P.; Wood, H.S.

1993-01-01

Better designs and instrumentation improve glycol dehydrator performance. This paper reports on these guidelines which emphasize efficient water removal from natural gas. Water, a common contaminant in natural gas, causes operational problems when it forms hydrates and deposits on solid surfaces. Result: plugged valves, meters, instruments and even pipelines. Simple rules resolve these problems and reduce downtime and maintenance costs.

Partial Least Squares with Structured Output for Modelling the Metabolomics Data Obtained from Complex Experimental Designs: A Study into the Y-Block Coding.

PubMed

Xu, Yun; Muhamadali, Howbeer; Sayqal, Ali; Dixon, Neil; Goodacre, Royston

2016-10-28

Partial least squares (PLS) is one of the most commonly used supervised modelling approaches for analysing multivariate metabolomics data. PLS is typically employed as either a regression model (PLS-R) or a classification model (PLS-DA). However, in metabolomics studies it is common to investigate multiple, potentially interacting, factors simultaneously following a specific experimental design. Such data often cannot be considered as a "pure" regression or a classification problem. Nevertheless, these data have often still been treated as a regression or classification problem and this could lead to ambiguous results. In this study, we investigated the feasibility of designing a hybrid target matrix Y that better reflects the experimental design than simple regression or binary class membership coding commonly used in PLS modelling. The new design of Y coding was based on the same principle used by structural modelling in machine learning techniques. Two real metabolomics datasets were used as examples to illustrate how the new Y coding can improve the interpretability of the PLS model compared to classic regression/classification coding.

A Framework for Designing Scaffolds That Improve Motivation and Cognition

PubMed Central

Belland, Brian R.; Kim, ChanMin; Hannafin, Michael J.

2013-01-01

A problematic, yet common, assumption among educational researchers is that when teachers provide authentic, problem-based experiences, students will automatically be engaged. Evidence indicates that this is often not the case. In this article, we discuss (a) problems with ignoring motivation in the design of learning environments, (b) problem-based learning and scaffolding as one way to help, (c) how scaffolding has strayed from what was originally equal parts motivational and cognitive support, and (d) a conceptual framework for the design of scaffolds that can enhance motivation as well as cognitive outcomes. We propose guidelines for the design of computer-based scaffolds to promote motivation and engagement while students are solving authentic problems. Remaining questions and suggestions for future research are then discussed. PMID:24273351

How Differences in Interactions Affect Learning and Development of Design Expertise in the Context of Biomedical Engineering Design

ERIC Educational Resources Information Center

Svihla, Vanessa Lynn

2009-01-01

Authentic design commonly involves teams of designers collaborating on ill-structured problems over extended time periods. Nonetheless, design has been studied extensively in sequestered settings, limiting our understanding of design as process and especially of learning design process. This study addresses potential shortcomings of such studies…

Integrated Controls-Structures Design Methodology for Flexible Spacecraft

NASA Technical Reports Server (NTRS)

Maghami, P. G.; Joshi, S. M.; Price, D. B.

1995-01-01

This paper proposes an approach for the design of flexible spacecraft, wherein the structural design and the control system design are performed simultaneously. The integrated design problem is posed as an optimization problem in which both the structural parameters and the control system parameters constitute the design variables, which are used to optimize a common objective function, thereby resulting in an optimal overall design. The approach is demonstrated by application to the integrated design of a geostationary platform, and to a ground-based flexible structure experiment. The numerical results obtained indicate that the integrated design approach generally yields spacecraft designs that are substantially superior to the conventional approach, wherein the structural design and control design are performed sequentially.

Estimating occupancy rates with imperfect detection under complex survey designs

EPA Science Inventory

Monitoring the occurrence of specific amphibian species is of interest. Typically, the monitoring design is a complex design that involves stratification and unequal probability of selection. When conducting field visits to selected sites, a common problem is that during a singl...

Aeronautic instruments. Section I : general classification of instruments and problems including bibliography

NASA Technical Reports Server (NTRS)

Hersey, Mayo D

1923-01-01

This report is intended as a technical introduction to the series of reports on aeronautic instruments. It presents a discussion of those subjects which are common to all instruments. First, a general classification is given, embracing all types of instruments used in aeronautics. Finally, a classification is given of the various problems confronted by the instrument expert and investigator. In this way the following groups of problems are brought up for consideration: problems of mechanical design, human factor, manufacturing problems, supply and selection of instruments, problems concerning the technique of testing, problems of installation, problems concerning the use of instruments, problems of maintenance, and physical research problems. This enumeration of problems which are common to instruments in general serves to indicate the different points of view which should be kept in mind in approaching the study of any particular instrument.

The design of multirate digital control systems

NASA Technical Reports Server (NTRS)

Berg, M. C.

1986-01-01

The successive loop closures synthesis method is the only method for multirate (MR) synthesis in common use. A new method for MR synthesis is introduced which requires a gradient-search solution to a constrained optimization problem. Some advantages of this method are that the control laws for all control loops are synthesized simultaneously, taking full advantage of all cross-coupling effects, and that simple, low-order compensator structures are easily accomodated. The algorithm and associated computer program for solving the constrained optimization problem are described. The successive loop closures , optimal control, and constrained optimization synthesis methods are applied to two example design problems. A series of compensator pairs are synthesized for each example problem. The succesive loop closure, optimal control, and constrained optimization synthesis methods are compared, in the context of the two design problems.

The design of PC/MISI, a PC-based common user interface to remote information storage and retrieval systems. Presentation visuals. M.S. Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

This Working Paper Series entry represents a collection of presentation visuals associated with the companion report entitled, The Design of PC/MISI, a PC-Based Common User Interface to Remote Information Storage and Retrieval Systems, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-15. The paper discusses the following: problem definition; the PC solution; the goals of system design; the design description; future considerations, the research environment; conclusions.

Effective Child Guidance: An Educator's Guidebook.

ERIC Educational Resources Information Center

Hill, Brent Mathews

This guidebook is designed to assist educators in becoming more effective child guidance leaders within the school system. Sections discuss the following areas: (1) indicators of current emotional problems; (2) children's common emotional problems, including fears, separation and loss, misbehavior motivations, aggressiveness, stealing, lying,…

Modeling visual problem solving as analogical reasoning.

PubMed

Lovett, Andrew; Forbus, Kenneth

2017-01-01

We present a computational model of visual problem solving, designed to solve problems from the Raven's Progressive Matrices intelligence test. The model builds on the claim that analogical reasoning lies at the heart of visual problem solving, and intelligence more broadly. Images are compared via structure mapping, aligning the common relational structure in 2 images to identify commonalities and differences. These commonalities or differences can themselves be reified and used as the input for future comparisons. When images fail to align, the model dynamically rerepresents them to facilitate the comparison. In our analysis, we find that the model matches adult human performance on the Standard Progressive Matrices test, and that problems which are difficult for the model are also difficult for people. Furthermore, we show that model operations involving abstraction and rerepresentation are particularly difficult for people, suggesting that these operations may be critical for performing visual problem solving, and reasoning more generally, at the highest level. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Development of a prototype commonality analysis tool for use in space programs

NASA Technical Reports Server (NTRS)

Yeager, Dorian P.

1988-01-01

A software tool to aid in performing commonality analyses, called Commonality Analysis Problem Solver (CAPS), was designed, and a prototype version (CAPS 1.0) was implemented and tested. The CAPS 1.0 runs in an MS-DOS or IBM PC-DOS environment. The CAPS is designed around a simple input language which provides a natural syntax for the description of feasibility constraints. It provides its users with the ability to load a database representing a set of design items, describe the feasibility constraints on items in that database, and do a comprehensive cost analysis to find the most economical substitution pattern.

Active Subspaces of Airfoil Shape Parameterizations

NASA Astrophysics Data System (ADS)

Grey, Zachary J.; Constantine, Paul G.

2018-05-01

Design and optimization benefit from understanding the dependence of a quantity of interest (e.g., a design objective or constraint function) on the design variables. A low-dimensional active subspace, when present, identifies important directions in the space of design variables; perturbing a design along the active subspace associated with a particular quantity of interest changes that quantity more, on average, than perturbing the design orthogonally to the active subspace. This low-dimensional structure provides insights that characterize the dependence of quantities of interest on design variables. Airfoil design in a transonic flow field with a parameterized geometry is a popular test problem for design methodologies. We examine two particular airfoil shape parameterizations, PARSEC and CST, and study the active subspaces present in two common design quantities of interest, transonic lift and drag coefficients, under each shape parameterization. We mathematically relate the two parameterizations with a common polynomial series. The active subspaces enable low-dimensional approximations of lift and drag that relate to physical airfoil properties. In particular, we obtain and interpret a two-dimensional approximation of both transonic lift and drag, and we show how these approximation inform a multi-objective design problem.

Integrating Advance Organizers and Multidimensional Information Display in Electronic Performance Support Systems

ERIC Educational Resources Information Center

Hung, Wei-Chen; Chao, Chia-An

2007-01-01

This study has reviewed major design approaches for electronic performance support systems and identified two common problems: users' inability to comprehend screen-based material and poorly designed instructional scaffolds. This paper presents a design approach, called the "Matrix-Aided Performance System" ("MAPS"), which enables these problems…

Clean Air by Design.

ERIC Educational Resources Information Center

Crawford, Gary N.

1995-01-01

Planning new construction is an opportunity to recognize indoor environmental quality (IEQ) issues. Provides an overview of some common IEQ issues associated with construction projects. A building's heating, ventilating, and air-conditioning (HVAC) system is by far the single most common cause of IEQ problems and complaints. (MLF)

Experimental design, power and sample size for animal reproduction experiments.

PubMed

Chapman, Phillip L; Seidel, George E

2008-01-01

The present paper concerns statistical issues in the design of animal reproduction experiments, with emphasis on the problems of sample size determination and power calculations. We include examples and non-technical discussions aimed at helping researchers avoid serious errors that may invalidate or seriously impair the validity of conclusions from experiments. Screen shots from interactive power calculation programs and basic SAS power calculation programs are presented to aid in understanding statistical power and computing power in some common experimental situations. Practical issues that are common to most statistical design problems are briefly discussed. These include one-sided hypothesis tests, power level criteria, equality of within-group variances, transformations of response variables to achieve variance equality, optimal specification of treatment group sizes, 'post hoc' power analysis and arguments for the increased use of confidence intervals in place of hypothesis tests.

Acoustics in Research Facilities--Control of Wanted and Unwanted Sound. Laboratory Design Notes.

ERIC Educational Resources Information Center

Newman, Robert B.

Common and special acoustics problems are discussed in relation to the design and construction of research facilities. Following a brief examination of design criteria for the control of wanted and unwanted sound, the technology for achieving desired results is discussed. Emphasis is given to various design procedures and materials for the control…

The Cake Contest

ERIC Educational Resources Information Center

Haberern, Colleen

2016-01-01

With the adoption of the Common Core State Standards for Mathematics (CCSSM), many teachers are changing their classroom structure from teacher-directed to student-centered. When the author began designing and using problem-based tasks she saw a drastic improvement in student engagement and problem-solving skills. The author describes the Cake…

Approximation-based common principal component for feature extraction in multi-class brain-computer interfaces.

PubMed

Hoang, Tuan; Tran, Dat; Huang, Xu

2013-01-01

Common Spatial Pattern (CSP) is a state-of-the-art method for feature extraction in Brain-Computer Interface (BCI) systems. However it is designed for 2-class BCI classification problems. Current extensions of this method to multiple classes based on subspace union and covariance matrix similarity do not provide a high performance. This paper presents a new approach to solving multi-class BCI classification problems by forming a subspace resembled from original subspaces and the proposed method for this approach is called Approximation-based Common Principal Component (ACPC). We perform experiments on Dataset 2a used in BCI Competition IV to evaluate the proposed method. This dataset was designed for motor imagery classification with 4 classes. Preliminary experiments show that the proposed ACPC feature extraction method when combining with Support Vector Machines outperforms CSP-based feature extraction methods on the experimental dataset.

Intergenerational Transmission of Childhood Conduct Problems

PubMed Central

D’Onofrio, Brian M.; Slutske, Wendy S.; Turkheimer, Eric; Emery, Robert E.; Paige Harden, K.; Heath, Andrew C.; Madden, Pamela A. F.; Martin, Nicholas G.

2010-01-01

Context The familial nature of childhood conduct problems has been well documented, but few genetically informed studies have explicitly explored the processes through which parental conduct problems influence an offspring’s behavior problems. Objective To delineate the genetic and environmental processes underlying the intergenerational transmission of childhood conduct problems. Design We used hierarchical linear models to analyze data from a Children of Twins Study, a quasiexperimental design, to explore the extent to which genetic factors common to both generations, unmeasured environmental factors that are shared by twins, or measured characteristics of both parents confound the intergenerational association. Setting Participants were recruited from the community and completed a semistructured diagnostic telephone interview. Participants The research used a high-risk sample of twins, their spouses, and their young adult offspring (n=2554) from 889 twin families in the Australian Twin Registry, but the analyses used sample weights to produce parameter estimates for the community-based volunteer sample of twins. Main Outcome Measure Number of conduct disorder symptoms. Results The magnitude of the intergenerational transmission was significant for all offspring, though it was stronger for males (effect size [Cohen d]=0.21; 95% confidence interval, 0.15–0.17) than females (d=0.09; 95% confidence interval, 0.05–0.14). The use of the Children of Twins design and measured covariates indicated that the intergenerational transmission of conduct problems for male offspring was largely mediated by environmental variables specifically related to parental conduct disorder (d=0.13; 95% confidence interval, 0.02–0.23). In contrast, the intergenerational transmission of conduct problems was not because of environmentally mediated causal processes for female offspring (d=−0.09; 95% confidence interval, −0.20 to 0.03); a common genetic liability accounted for the intergenerational relations. Conclusions The mechanisms underlying the inter-generational transmission of conduct problems depend on the sex of the offspring. The results are consistent with an environmentally mediated causal role of parental conduct problems on behavior problems in males. Common genetic risk, however, confounds the entire inter-generational transmission in female offspring. PMID:17606816

Evolutionary optimization methods for accelerator design

NASA Astrophysics Data System (ADS)

Poklonskiy, Alexey A.

Many problems from the fields of accelerator physics and beam theory can be formulated as optimization problems and, as such, solved using optimization methods. Despite growing efficiency of the optimization methods, the adoption of modern optimization techniques in these fields is rather limited. Evolutionary Algorithms (EAs) form a relatively new and actively developed optimization methods family. They possess many attractive features such as: ease of the implementation, modest requirements on the objective function, a good tolerance to noise, robustness, and the ability to perform a global search efficiently. In this work we study the application of EAs to problems from accelerator physics and beam theory. We review the most commonly used methods of unconstrained optimization and describe the GATool, evolutionary algorithm and the software package, used in this work, in detail. Then we use a set of test problems to assess its performance in terms of computational resources, quality of the obtained result, and the tradeoff between them. We justify the choice of GATool as a heuristic method to generate cutoff values for the COSY-GO rigorous global optimization package for the COSY Infinity scientific computing package. We design the model of their mutual interaction and demonstrate that the quality of the result obtained by GATool increases as the information about the search domain is refined, which supports the usefulness of this model. We Giscuss GATool's performance on the problems suffering from static and dynamic noise and study useful strategies of GATool parameter tuning for these and other difficult problems. We review the challenges of constrained optimization with EAs and methods commonly used to overcome them. We describe REPA, a new constrained optimization method based on repairing, in exquisite detail, including the properties of its two repairing techniques: REFIND and REPROPT. We assess REPROPT's performance on the standard constrained optimization test problems for EA with a variety of different configurations and suggest optimal default parameter values based on the results. Then we study the performance of the REPA method on the same set of test problems and compare the obtained results with those of several commonly used constrained optimization methods with EA. Based on the obtained results, particularly on the outstanding performance of REPA on test problem that presents significant difficulty for other reviewed EAs, we conclude that the proposed method is useful and competitive. We discuss REPA parameter tuning for difficult problems and critically review some of the problems from the de-facto standard test problem set for the constrained optimization with EA. In order to demonstrate the practical usefulness of the developed method, we study several problems of accelerator design and demonstrate how they can be solved with EAs. These problems include a simple accelerator design problem (design a quadrupole triplet to be stigmatically imaging, find all possible solutions), a complex real-life accelerator design problem (an optimization of the front end section for the future neutrino factory), and a problem of the normal form defect function optimization which is used to rigorously estimate the stability of the beam dynamics in circular accelerators. The positive results we obtained suggest that the application of EAs to problems from accelerator theory can be very beneficial and has large potential. The developed optimization scenarios and tools can be used to approach similar problems.

Design of maintainable drains for earth retaining structures : final report and design guide.

DOT National Transportation Integrated Search

2017-04-01

Poor drainage is by far the most common cause of poor performance for earth retention systems. Poor performance includes burdensome serviceability problems that can progress to outright failure of the earth retention system if not addressed. : A comm...

The design of a common lunar lander

NASA Technical Reports Server (NTRS)

Driggers, Dan; Hearrell, Sean; Key, Kevin; Le, Brian; Love, Glen; Mcmullen, Rob; Messec, Scott; Ruhnke, Jim

1991-01-01

The Austin Cynthesis Corporation was formed to respond to a Request for Proposal for the design of a Common Lunar Lander (CLL) capable of carrying lightweight (less than 500 kg), unspecified payload to the moon. This Final Design Report Document includes information on the requirements for the design project; the ideas proposed as solutions to the design problem; the work which has been completed in support of the design effort; justifications, validations, and verifications of decisions made during the project; and suggestions for future work to be done in support of the project. A project schedule, including current status of the items included on the schedule, as well as cost and management summaries is also included.

A Senior Medical Student Seminar Designed to Promote Problem-Solving.

ERIC Educational Resources Information Center

Donohue, James F.; Shumway, James M.

1983-01-01

A seminar was developed to increase students' learning opportunities in respiratory disease and to identify common problem areas in hospital medical care. It provided practice in clinical diagnosis and patient management by promoting dialog, faculty feedback, and self-evaluation. Specific case studies are used for discussion. (MSE)

Dynamic minimum set problem for reserve design: Heuristic solutions for large problems

PubMed Central

Sabbadin, Régis; Johnson, Fred A.; Stith, Bradley

2018-01-01

Conversion of wild habitats to human dominated landscape is a major cause of biodiversity loss. An approach to mitigate the impact of habitat loss consists of designating reserves where habitat is preserved and managed. Determining the most valuable areas to preserve in a landscape is called the reserve design problem. There exists several possible formulations of the reserve design problem, depending on the objectives and the constraints. In this article, we considered the dynamic problem of designing a reserve that contains a desired area of several key habitats. The dynamic case implies that the reserve cannot be designed in one time step, due to budget constraints, and that habitats can be lost before they are reserved, due for example to climate change or human development. We proposed two heuristics strategies that can be used to select sites to reserve each year for large reserve design problem. The first heuristic is a combination of the Marxan and site-ordering algorithms and the second heuristic is an augmented version of the common naive myopic heuristic. We evaluated the strategies on several simulated examples and showed that the augmented greedy heuristic is particularly interesting when some of the habitats to protect are particularly threatened and/or the compactness of the network is accounted for. PMID:29543830

Simulation-Based Evaluation of Learning Sequences for Instructional Technologies

ERIC Educational Resources Information Center

McEneaney, John E.

2016-01-01

Instructional technologies critically depend on systematic design, and learning hierarchies are a commonly advocated tool for designing instructional sequences. But hierarchies routinely allow numerous sequences and choosing an optimal sequence remains an unsolved problem. This study explores a simulation-based approach to modeling learning…

An adaptive response surface method for crashworthiness optimization

NASA Astrophysics Data System (ADS)

Shi, Lei; Yang, Ren-Jye; Zhu, Ping

2013-11-01

Response surface-based design optimization has been commonly used for optimizing large-scale design problems in the automotive industry. However, most response surface models are built by a limited number of design points without considering data uncertainty. In addition, the selection of a response surface in the literature is often arbitrary. This article uses a Bayesian metric to systematically select the best available response surface among several candidates in a library while considering data uncertainty. An adaptive, efficient response surface strategy, which minimizes the number of computationally intensive simulations, was developed for design optimization of large-scale complex problems. This methodology was demonstrated by a crashworthiness optimization example.

A Response to Paul Stapleton's "Critiquing Research Methodology"

ERIC Educational Resources Information Center

Ross, Steven J.

2006-01-01

Paul Stapleton's (2006) critique of quantitative research brings to the surface some common interpretive problems arising when experimental and quasi-experimental research designs are compared. While Stapleton may be correct in pointing out the superiority of experimental research designs because they best eliminate the influence of extraneous…

Developing a Dissertation Research Problem: A Guide for Doctoral Students in Human Resource Development and Adult Education

ERIC Educational Resources Information Center

Jacobs, Ronald L.

2013-01-01

the need to state the problem of the study based on the scholarly literature. Doctoral programs commonly require that students take a sequence of research courses that usually focus on how to carry-out a study. That is, the design, the methodology, and the…

The Popcorn Box Activity and Reasoning about Optimization

ERIC Educational Resources Information Center

Whiteley, Walter J.; Mamolo, Ami

2012-01-01

A well-known optimization problem is the Popcorn Box investigation, which involves a movie theater snack container. The problem has been tailored for classroom investigations by the Ontario Association for Mathematics Education. The exploration was designed for students in grades 9 through 12. A common strategy proposed for algebra students is to…

Design principles and common pool resource management: an institutional approach to evaluating community management in semi-arid Tanzania.

PubMed

Quinn, Claire H; Huby, Meg; Kiwasila, Hilda; Lovett, Jon C

2007-07-01

This paper analyses the role of institutions in the management of common pool resources (CPRs) in semi-arid Tanzania. Common property regimes have often been considered inadequate for the management of CPRs because of the problems of excludability, but they are becoming more widely supported as the way forward to overcome the problems of resource use and degradation in developing countries. A series of design principles for long enduring common property institutions have been proposed by Ostrom, but there is concern that they are not applicable to a wide range of real life situations or that they may be specific to certain types of CPR. Here, we compare these principles to the situation prevailing in 12 villages in six districts in semi-arid Tanzania. Data on management institutions were collected through semi-structured interviews and meetings at district and village level. The combined information was used to make a qualitative assessment of the strength with which each design principle appeared to operate in the management of forest, pasture and water resources. Boundaries, conflict and negotiation in CPR management are of key importance in semi-arid regions. However, the need for flexibility in order to deal with ecological uncertainty means that many management institutions would be considered weak or absent according to the design principle approach. This supports the view that the design principles should not be used as a 'blueprint to be imposed on resource management regimes' rather that they provide a framework for investigating common property regimes with the proviso that, certainly for semi-arid regions, they may highlight where management cannot be explained by institutional theory alone.

Using English as the Common Corporate Language in a German Multinational

ERIC Educational Resources Information Center

Swift, Jonathan S.; Wallace, James

2011-01-01

Purpose: This study aims to examine a German multinational that uses English as the common corporate language (CCL) for internal communications with its international subsidiaries/agencies. It examines use of English within the workplace, and problems/opportunities it presents to those who use it. Design/methodology: The questionnaire was piloted…

Common Ground for Action Software and Professional Development to Support Online Deliberation in Classrooms

ERIC Educational Resources Information Center

Christelle, Andrea; Dillard, Kara N.; Lindaman, Kara

2018-01-01

The Common Ground for Action (CGA) online deliberation platform is a dynamic tool designed to encourage diverse group members to identify collective responses to deeply controversial or "wicked" public problems that have no simple solution. The program promotes authentic deliberation, while minimizing the tactics of horse-trading and…

Survey of editors and reviewers of high-impact psychology journals: statistical and research design problems in submitted manuscripts.

PubMed

Harris, Alex; Reeder, Rachelle; Hyun, Jenny

2011-01-01

The authors surveyed 21 editors and reviewers from major psychology journals to identify and describe the statistical and design errors they encounter most often and to get their advice regarding prevention of these problems. Content analysis of the text responses revealed themes in 3 major areas: (a) problems with research design and reporting (e.g., lack of an a priori power analysis, lack of congruence between research questions and study design/analysis, failure to adequately describe statistical procedures); (b) inappropriate data analysis (e.g., improper use of analysis of variance, too many statistical tests without adjustments, inadequate strategy for addressing missing data); and (c) misinterpretation of results. If researchers attended to these common methodological and analytic issues, the scientific quality of manuscripts submitted to high-impact psychology journals might be significantly improved.

Problem neurology residents: a national survey.

PubMed

Tabby, David S; Majeed, Muhammed H; Schwartzman, Robert J

2011-06-14

Problem residents are found across most medical specialties at a prevalence of about 10%. This study was designed to explore the prevalence and causes of problem neurology residents and to compare neurology programs' responses and outcomes. Directors of 126 US neurology residency programs were sent an electronic survey. We collected data on demographics, first and all "identifiers" of problem residents, and year of training in which the problem was found. We asked about observable signs, etiology, and who performed remediation. We asked what resources were used and what outcomes occurred. Ninety-five program directors completed surveys (75% response rate). Almost all neurology programs have problem residents (81%). Age, sex, marital status, being a US native, or attending a US medical school had no effect on problem status. Being a parent carried a lower likelihood of problems (32%). Most commonly the problem is acted on during the first year of training. Faculty members without defined educational roles were the most frequent first identifiers. Program directors were the most common remediators. The most common remediation techniques were increasing supervision and assigning a faculty mentor. Graduate medical education office and psychiatric or psychological counseling services were most often used. Eleven percent of problem residents required a program for impaired physicians and 14% required a leave of absence. Sixteen percent were dismissed from their programs. The prevalence of problem residents in neurology is similar to other disciplines, and various resources are available to remediate them.

Natural language processing: an introduction.

PubMed

Nadkarni, Prakash M; Ohno-Machado, Lucila; Chapman, Wendy W

2011-01-01

To provide an overview and tutorial of natural language processing (NLP) and modern NLP-system design. This tutorial targets the medical informatics generalist who has limited acquaintance with the principles behind NLP and/or limited knowledge of the current state of the art. We describe the historical evolution of NLP, and summarize common NLP sub-problems in this extensive field. We then provide a synopsis of selected highlights of medical NLP efforts. After providing a brief description of common machine-learning approaches that are being used for diverse NLP sub-problems, we discuss how modern NLP architectures are designed, with a summary of the Apache Foundation's Unstructured Information Management Architecture. We finally consider possible future directions for NLP, and reflect on the possible impact of IBM Watson on the medical field.

Natural language processing: an introduction

PubMed Central

Ohno-Machado, Lucila; Chapman, Wendy W

2011-01-01

Objectives To provide an overview and tutorial of natural language processing (NLP) and modern NLP-system design. Target audience This tutorial targets the medical informatics generalist who has limited acquaintance with the principles behind NLP and/or limited knowledge of the current state of the art. Scope We describe the historical evolution of NLP, and summarize common NLP sub-problems in this extensive field. We then provide a synopsis of selected highlights of medical NLP efforts. After providing a brief description of common machine-learning approaches that are being used for diverse NLP sub-problems, we discuss how modern NLP architectures are designed, with a summary of the Apache Foundation's Unstructured Information Management Architecture. We finally consider possible future directions for NLP, and reflect on the possible impact of IBM Watson on the medical field. PMID:21846786

The Early Years: Integrating Design

ERIC Educational Resources Information Center

Ashbrook, Peggy; Nellor, Sue

2015-01-01

Engineering is such a common part of children's work in early childhood programs that teachers can simply look around the room to identify examples where students have engaged in engineering practices. This article presents a classroom activity that integrates engineering design by building on the everyday problems that young children encounter in…

Split-plot designs for robotic serial dilution assays.

PubMed

Buzas, Jeffrey S; Wager, Carrie G; Lansky, David M

2011-12-01

This article explores effective implementation of split-plot designs in serial dilution bioassay using robots. We show that the shortest path for a robot to fill plate wells for a split-plot design is equivalent to the shortest common supersequence problem in combinatorics. We develop an algorithm for finding the shortest common supersequence, provide an R implementation, and explore the distribution of the number of steps required to implement split-plot designs for bioassay through simulation. We also show how to construct collections of split plots that can be filled in a minimal number of steps, thereby demonstrating that split-plot designs can be implemented with nearly the same effort as strip-plot designs. Finally, we provide guidelines for modeling data that result from these designs. © 2011, The International Biometric Society.

Importance of balanced architectures in the design of high-performance imaging systems

NASA Astrophysics Data System (ADS)

Sgro, Joseph A.; Stanton, Paul C.

1999-03-01

Imaging systems employed in demanding military and industrial applications, such as automatic target recognition and computer vision, typically require real-time high-performance computing resources. While high- performances computing systems have traditionally relied on proprietary architectures and custom components, recent advances in high performance general-purpose microprocessor technology have produced an abundance of low cost components suitable for use in high-performance computing systems. A common pitfall in the design of high performance imaging system, particularly systems employing scalable multiprocessor architectures, is the failure to balance computational and memory bandwidth. The performance of standard cluster designs, for example, in which several processors share a common memory bus, is typically constrained by memory bandwidth. The symptom characteristic of this problem is failure to the performance of the system to scale as more processors are added. The problem becomes exacerbated if I/O and memory functions share the same bus. The recent introduction of microprocessors with large internal caches and high performance external memory interfaces makes it practical to design high performance imaging system with balanced computational and memory bandwidth. Real word examples of such designs will be presented, along with a discussion of adapting algorithm design to best utilize available memory bandwidth.

Identifying Common Practice Elements to Improve Social, Emotional, and Behavioral Outcomes of Young Children in Early Childhood Classrooms.

PubMed

McLeod, Bryce D; Sutherland, Kevin S; Martinez, Ruben G; Conroy, Maureen A; Snyder, Patricia A; Southam-Gerow, Michael A

2017-02-01

Educators are increasingly being encouraged to implement evidence-based interventions and practices to address the social, emotional, and behavioral needs of young children who exhibit problem behavior in early childhood settings. Given the nature of social-emotional learning during the early childhood years and the lack of a common set of core evidence-based practices within the early childhood literature, selection of instructional practices that foster positive social, emotional, and behavioral outcomes for children in early childhood settings can be difficult. The purpose of this paper is to report findings from a study designed to identify common practice elements found in comprehensive intervention models (i.e., manualized interventions that include a number of components) or discrete practices (i.e., a specific behavior or action) designed to target social, emotional, and behavioral learning of young children who exhibit problem behavior. We conducted a systematic review of early childhood classroom interventions that had been evaluated in randomized group designs, quasi-experimental designs, and single-case experimental designs. A total of 49 published articles were identified, and an iterative process was used to identify common practice elements. The practice elements were subsequently reviewed by experts in social-emotional and behavioral interventions for young children. Twenty-four practice elements were identified and classified into content (the goal or general principle that guides a practice element) and delivery (the way in which a teacher provides instruction to the child) categories. We discuss implications that the identification of these practice elements found in the early childhood literature has for efforts to implement models and practices.

Indirection and computer security.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, Michael J.

2011-09-01

The discipline of computer science is built on indirection. David Wheeler famously said, 'All problems in computer science can be solved by another layer of indirection. But that usually will create another problem'. We propose that every computer security vulnerability is yet another problem created by the indirections in system designs and that focusing on the indirections involved is a better way to design, evaluate, and compare security solutions. We are not proposing that indirection be avoided when solving problems, but that understanding the relationships between indirections and vulnerabilities is key to securing computer systems. Using this perspective, we analyzemore » common vulnerabilities that plague our computer systems, consider the effectiveness of currently available security solutions, and propose several new security solutions.« less

Externalizing problems, attention regulation, and household chaos: a longitudinal behavioral genetic study.

PubMed

Wang, Zhe; Deater-Deckard, Kirby; Petrill, Stephen A; Thompson, Lee A

2012-08-01

Previous research documented a robust link between difficulties in self-regulation and development of externalizing problems (i.e., aggression and delinquency). In this study, we examined the longitudinal additive and interactive genetic and environmental covariation underlying this well-established link using a twin design. The sample included 131 pairs of monozygotic twins and 173 pairs of same-sex dizygotic twins who participated in three waves of annual assessment. Mothers and fathers provided reports of externalizing problems. Teacher report and observer rating were used to assess twin's attention regulation. The etiology underlying the link between externalizing problems and attention regulation shifted from a common genetic mechanism to a common environmental mechanism in the transition across middle childhood. Household chaos moderated the genetic variance of and covariance between externalizing problems and attention regulation. The genetic influence on individual differences in both externalizing problems and attention regulation was stronger in more chaotic households. However, higher levels of household chaos attenuated the genetic link between externalizing problems and attention regulation.

Externalizing problems, attention regulation, and household chaos: A longitudinal behavioral genetic study

PubMed Central

Wang, Zhe; Deater-Deckard, Kirby; Petrill, Stephen A.; Thompson, Lee A.

2015-01-01

Previous research has documented a robust link between difficulties in self-regulation and development of externalizing problems (i.e., aggression and delinquency). In the current study, we examined the longitudinal additive and interactive genetic and environmental covariation underlying this well-established link using a twin design. The sample included 131 pairs of monozygotic twins and 173 pairs of same-sex dizygotic twins who participated in three waves of annual assessment. Mothers and fathers provided reports of externalizing problems. Teacher report and observer rating were used to assess twin’s attention regulation. The etiology underlying the link between externalizing problems and attention regulation shifted from a common genetic mechanism to a common environmental mechanism in the transition across middle childhood. Household chaos moderated the genetic variance of and covariance between externalizing problems and attention regulation. The genetic influence on individual differences in both externalizing problems and attention regulation was stronger in more chaotic household. However, higher levels of household chaos attenuated the genetic link between externalizing problems and attention regulation. PMID:22781853

USDA Forest Service national protocols for sampling air pollution-sensitive waters

Treesearch

T. J. Sullivan

2012-01-01

The first step in designing a surface water sampling program is identifying one or more problems or questions that require information on water quality. Common water quality problems include nutrient enrichment (from a variety of causes), effects of atmospheric deposition (acidification, eutrophication, toxicity), and effects of major disturbances such as fire or pest...

Evaluation of Creative Problem-Solving Abilities in Undergraduate Structural Engineers through Interdisciplinary Problem-Based Learning

ERIC Educational Resources Information Center

McCrum, Daniel Patrick

2017-01-01

For a structural engineer, effective communication and interaction with architects cannot be underestimated as a key skill to success throughout their professional career. Structural engineers and architects have to share a common language and understanding of each other in order to achieve the most desirable architectural and structural designs.…

Practical Solutions to Practically Every Problem: The Early Childhood Teacher's Manual. Revised Edition.

ERIC Educational Resources Information Center

Saifer, Steffen

Based on sound developmentally appropriate theory, this revised guide is designed to help early childhood teachers deal with common problems that arise in all aspects of their work. Following an introduction and a list of the 20 most important principles for successful preschool teaching, the guide is divided into nine parts. Part 1 addresses…

Practical Solutions to Practically Every Problem: The Early Childhood Teacher's Manual.

ERIC Educational Resources Information Center

Saifer, Steffen

This book is designed to help early childhood teachers deal with common problems that arise in all aspects of their work. Part one addresses daily dilemmas such as schedule planning, meal and nap times, art, and outdoor play. Part two covers classroom concerns such as the physical environment, curriculum, individual student needs, field trips,…

Development of an Internet Collaborative Learning Behavior Scale--Preliminary Results.

ERIC Educational Resources Information Center

Hsu, Ti; Wang, Hsiu Fei

It is well known that math phobia is a common problem among young school children. It becomes a challenge to educational practitioners and academic researchers to figure out ways to overcome the problem. Collaborative team learning has been proposed as one of the alternatives. This study was part of a large and ongoing research project designed to…

Behavioral Assessment: Questionnaires.

ERIC Educational Resources Information Center

Wilson, C. Chrisman

1980-01-01

This is a general discussion of the validity, reliability, function, and format of questionnaires designed to measure problem behavior, noncompliance, anxiety, social interaction, hyperactivity, drug use, and sexual behavior. Commonly used questionnaires are cited. (CP)

Unreliable numbers: error and harm induced by bad design can be reduced by better design

PubMed Central

Thimbleby, Harold; Oladimeji, Patrick; Cairns, Paul

2015-01-01

Number entry is a ubiquitous activity and is often performed in safety- and mission-critical procedures, such as healthcare, science, finance, aviation and in many other areas. We show that Monte Carlo methods can quickly and easily compare the reliability of different number entry systems. A surprising finding is that many common, widely used systems are defective, and induce unnecessary human error. We show that Monte Carlo methods enable designers to explore the implications of normal and unexpected operator behaviour, and to design systems to be more resilient to use error. We demonstrate novel designs with improved resilience, implying that the common problems identified and the errors they induce are avoidable. PMID:26354830

Information for the user in design of intelligent systems

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra L.

1993-01-01

Recommendations are made for improving intelligent system reliability and usability based on the use of information requirements in system development. Information requirements define the task-relevant messages exchanged between the intelligent system and the user by means of the user interface medium. Thus, these requirements affect the design of both the intelligent system and its user interface. Many difficulties that users have in interacting with intelligent systems are caused by information problems. These information problems result from the following: (1) not providing the right information to support domain tasks; and (2) not recognizing that using an intelligent system introduces new user supervisory tasks that require new types of information. These problems are especially prevalent in intelligent systems used for real-time space operations, where data problems and unexpected situations are common. Information problems can be solved by deriving information requirements from a description of user tasks. Using information requirements embeds human-computer interaction design into intelligent system prototyping, resulting in intelligent systems that are more robust and easier to use.

The Other Side of Method Bias: The Perils of Distinct Source Research Designs

ERIC Educational Resources Information Center

Kammeyer-Mueller, John; Steel, Piers D. G.; Rubenstein, Alex

2010-01-01

Common source bias has been the focus of much attention. To minimize the problem, researchers have sometimes been advised to take measurements of predictors from one observer and measurements of outcomes from another observer or to use separate occasions of measurement. We propose that these efforts to eliminate biases due to common source…

Teacher Concerns and the Enacted Curriculum of the Common Core State Standards in High School Mathematics

ERIC Educational Resources Information Center

Diletti, Jeri S.

2017-01-01

The Common Core State Standards for Mathematics (CCSSM) highlight the importance of students' conceptual understanding, mathematical reasoning, and problem solving in order to prepare students for college and careers. However, the success of this reform effort largely depends on how teachers actually design and implement instruction based on the…

Construction of the Dependence Matrix Based on the TRIZ Contradiction Matrix in OOD

NASA Astrophysics Data System (ADS)

Ma, Jianhong; Zhang, Quan; Wang, Yanling; Luo, Tao

In the Object-Oriented software design (OOD), design of the class and object, definition of the classes’ interface and inheritance levels and determination of dependent relations have a serious impact on the reusability and flexibility of the system. According to the concrete problems of design, how to select the right solution from the hundreds of the design schemas which has become the focus of attention of designers. After analyzing lots of software design schemas in practice and Object-Oriented design patterns, this paper constructs the dependence matrix of Object-Oriented software design filed, referring to contradiction matrix of TRIZ (Theory of Inventive Problem Solving) proposed by the former Soviet Union innovation master Altshuller. As the practice indicates, it provides a intuitive, common and standardized method for designers to choose the right design schema. Make research and communication more effectively, and also improve the software development efficiency and software quality.

Biology doesn't waste energy: that's really smart

NASA Astrophysics Data System (ADS)

Vincent, Julian F. V.; Bogatyreva, Olga; Bogatyrev, Nikolaj

2006-03-01

Biology presents us with answers to design problems that we suspect would be very useful if only we could implement them successfully. We use the Russian theory of problem solving - TRIZ - in a novel way to provide a system for analysis and technology transfer. The analysis shows that whereas technology uses energy as the main means of solving technical problems, biology uses information and structure. Biology is also strongly hierarchical. The suggestion is that smart technology in hierarchical structures can help us to design much more efficient technology. TRIZ also suggests that biological design is autonomous and can be defined by the prefix "self-" with any function. This autonomy extends to the control system, so that the sensor is commonly also the actuator, resulting in simpler systems and greater reliability.

Stress-Constrained Structural Topology Optimization with Design-Dependent Loads

NASA Astrophysics Data System (ADS)

Lee, Edmund

Topology optimization is commonly used to distribute a given amount of material to obtain the stiffest structure, with predefined fixed loads. The present work investigates the result of applying stress constraints to topology optimization, for problems with design-depending loading, such as self-weight and pressure. In order to apply pressure loading, a material boundary identification scheme is proposed, iteratively connecting points of equal density. In previous research, design-dependent loading problems have been limited to compliance minimization. The present study employs a more practical approach by minimizing mass subject to failure constraints, and uses a stress relaxation technique to avoid stress constraint singularities. The results show that these design dependent loading problems may converge to a local minimum when stress constraints are enforced. Comparisons between compliance minimization solutions and stress-constrained solutions are also given. The resulting topologies of these two solutions are usually vastly different, demonstrating the need for stress-constrained topology optimization.

Problem Scoping Design Thinking and Close Reading: Makerspaces in the School Library

ERIC Educational Resources Information Center

Blakemore, Megan

2018-01-01

Makerspaces, collaborative workspaces stocked with materials and tools for creating, building, designing, and learning, are becoming more and more common in schools and, in particular, in school libraries. Makerspaces in the school library allow for connections between making and literacy. Indeed, such connections are authentic and natural as…

A Qualitative Study of Psychosocial Problems among Parents of Children with Cerebral Palsy Attending Two Tertiary Care Hospitals in Western India

PubMed Central

Panchal, Dhara Antani

2014-01-01

Objective. To explore the psychosocial problems faced by the parents of children with cerebral palsy (CP) in rural and urban settings. Design. Qualitative research design using focus group discussions (FGDs) was used for the study. Setting. Two FGDs comprising one at a rural tertiary level care hospital and the other at an urban tertiary level care hospital were conducted. Participants. A total of thirteen parents participated in the two FGDs. Main Outcome Measured. Psychosocial problems experienced by the parents of children suffering from CP were measured. Results. The problems experienced by the mothers were associated with common themes such as disturbed social relationships, health problems, financial problems, moments of happiness, worries about future of the child, need for more support services, and lack of adequate number of trained physiotherapists. All the parents had children with problems since birth and most had approached various health care providers for a cure for their child. Conclusions. A wide range of psychosocial problems are experienced by the parents of children with CP. Studies like this can provide valuable information for designing a family centered care programme for children with CP. PMID:24967331

What are the learning outcomes of a short postgraduate training course in dermatology for primary care doctors?

PubMed Central

2011-01-01

Background There are increasing expectations on primary care doctors to shoulder a bigger share of care for patients with common dermatological problems in the community. This study examined the learning outcomes of a short postgraduate course in dermatology for primary care doctors. Methods A self-reported questionnaire developed by the research team was sent to the Course graduates. A retrospective design was adopted to compare their clinical practice characteristics before and after the Course. Differences in the ratings were analysed using the nonparametric Wilcoxon signed rank test to evaluate the effectiveness of the Course in various aspects. Results Sixty-nine graduates replied with a response rate of 42.9% (69/161). Most were confident of diagnosing (91.2%) and managing (88.4%) common dermatological problems after the Course, compared to 61.8% and 58.0% respectively before the Course. Most had also modified their approach and increased their attention to patients with dermatological problems. The number of patients with dermatological problems seen by the graduates per day showed significant increase after the Course, while the average percentage of referrals to dermatologists dropped from 31.9% to 23.5%. The proportion of graduates interested in following up patients with chronic dermatological problems increased from 60.3% to 77.9%. Conclusions Graduates of the Course reported improved confidence, attitudes and skills in treating common dermatological problems. They also reported to handle more patients with common dermatological problems in their practice and refer fewer patients. PMID:21575191

Some new airfoils

NASA Technical Reports Server (NTRS)

Eppler, R.

1979-01-01

A computer approach to the design and analysis of airfoils and some common problems concerning laminar separation bubbles at different lift coefficients are briefly discussed. Examples of application to ultralight airplanes, canards, and sailplanes with flaps are given.

The Task Approach to Child Care Competency: An Advanced Level Training Curriculum for Residential Child Care Workers.

ERIC Educational Resources Information Center

Heckman, Iris; Rodwell, Mary K.

The purpose of the project was to develop an advanced, competency-based training program for residential youth service/child care workers providing services to children and adolescents with severe mental health or emotional problems. The program was designed in response to problems common to these workers in rural areas such as Kansas, including…

Multi-objective engineering design using preferences

NASA Astrophysics Data System (ADS)

Sanchis, J.; Martinez, M.; Blasco, X.

2008-03-01

System design is a complex task when design parameters have to satisy a number of specifications and objectives which often conflict with those of others. This challenging problem is called multi-objective optimization (MOO). The most common approximation consists in optimizing a single cost index with a weighted sum of objectives. However, once weights are chosen the solution does not guarantee the best compromise among specifications, because there is an infinite number of solutions. A new approach can be stated, based on the designer's experience regarding the required specifications and the associated problems. This valuable information can be translated into preferences for design objectives, and will lead the search process to the best solution in terms of these preferences. This article presents a new method, which enumerates these a priori objective preferences. As a result, a single objective is built automatically and no weight selection need be performed. Problems occuring because of the multimodal nature of the generated single cost index are managed with genetic algorithms (GAs).

Tactical missile turbulence problems

NASA Technical Reports Server (NTRS)

Dickson, Richard E.

1987-01-01

Of particular interest is atmospheric turbulence in the atmospheric boundary layer, since this affects both the launch and terminal phase of flight, and the total flight for direct fire systems. Brief discussions are presented on rocket artillery boost wind problems, mean wind correction, turbulent boost wind correction, the Dynamically Aimed Free Flight Rocket (DAFFR) wind filter, the DAFFR test, and rocket wake turbulence problems. It is concluded that many of the turbulence problems of rockets and missiles are common to those of aircraft, such as structural loading and control system design. However, these problems have not been solved at this time.

Distributed Control with Collective Intelligence

NASA Technical Reports Server (NTRS)

Wolpert, David H.; Wheeler, Kevin R.; Tumer, Kagan

1998-01-01

We consider systems of interacting reinforcement learning (RL) algorithms that do not work at cross purposes , in that their collective behavior maximizes a global utility function. We call such systems COllective INtelligences (COINs). We present the theory of designing COINs. Then we present experiments validating that theory in the context of two distributed control problems: We show that COINs perform near-optimally in a difficult variant of Arthur's bar problem [Arthur] (and in particular avoid the tragedy of the commons for that problem), and we also illustrate optimal performance in the master-slave problem.

Numerical studies of the thermal design sensitivity calculation for a reaction-diffusion system with discontinuous derivatives

NASA Technical Reports Server (NTRS)

Hou, Jean W.; Sheen, Jeen S.

1987-01-01

The aim of this study is to find a reliable numerical algorithm to calculate thermal design sensitivities of a transient problem with discontinuous derivatives. The thermal system of interest is a transient heat conduction problem related to the curing process of a composite laminate. A logical function which can smoothly approximate the discontinuity is introduced to modify the system equation. Two commonly used methods, the adjoint variable method and the direct differentiation method, are then applied to find the design derivatives of the modified system. The comparisons of numerical results obtained by these two methods demonstrate that the direct differentiation method is a better choice to be used in calculating thermal design sensitivity.

The Experimental Design Assistant.

PubMed

Percie du Sert, Nathalie; Bamsey, Ian; Bate, Simon T; Berdoy, Manuel; Clark, Robin A; Cuthill, Innes; Fry, Derek; Karp, Natasha A; Macleod, Malcolm; Moon, Lawrence; Stanford, S Clare; Lings, Brian

2017-09-01

Addressing the common problems that researchers encounter when designing and analysing animal experiments will improve the reliability of in vivo research. In this article, the Experimental Design Assistant (EDA) is introduced. The EDA is a web-based tool that guides the in vivo researcher through the experimental design and analysis process, providing automated feedback on the proposed design and generating a graphical summary that aids communication with colleagues, funders, regulatory authorities, and the wider scientific community. It will have an important role in addressing causes of irreproducibility.

The Experimental Design Assistant

PubMed Central

Bamsey, Ian; Bate, Simon T.; Berdoy, Manuel; Clark, Robin A.; Cuthill, Innes; Fry, Derek; Karp, Natasha A.; Macleod, Malcolm; Moon, Lawrence; Stanford, S. Clare; Lings, Brian

2017-01-01

Addressing the common problems that researchers encounter when designing and analysing animal experiments will improve the reliability of in vivo research. In this article, the Experimental Design Assistant (EDA) is introduced. The EDA is a web-based tool that guides the in vivo researcher through the experimental design and analysis process, providing automated feedback on the proposed design and generating a graphical summary that aids communication with colleagues, funders, regulatory authorities, and the wider scientific community. It will have an important role in addressing causes of irreproducibility. PMID:28957312

Designing with Care. A Guide to Adaptation of the Built Environment for Disabled Persons.

ERIC Educational Resources Information Center

Hanson, Lisa; And Others

Developed as part of the International Year of Disabled Persons, the guide is intended to help planners, architects, and designers to accommodate the built environment of developing regions for disabled persons. Guidelines focus on public building in urban or village settings and emphasize simple solutions to common problems. Following an…

Design Features for Internet-Based Quality of Life Instrument in Inflammatory Bowel Disease

PubMed Central

Jonsson, Jens

1999-01-01

The idea of enabling user interaction in an Internet-based quality of life application comes with intention to solve problems common for conventional ways of communicating with patients. Here we are presenting results of the feasibility study, which regarded design and introduction of new forms to acquire patient information. Imagesp1092-a

Student Mobility, Dosage, and Principal Stratification in School-Based RCTs

ERIC Educational Resources Information Center

Schochet, Peter Z.

2013-01-01

In school-based randomized control trials (RCTs), a common design is to follow student cohorts over time. For such designs, education researchers usually focus on the place-based (PB) impact parameter, which is estimated using data collected on all students enrolled in the study schools at each data collection point. A potential problem with this…

Design of the Hospital Integrated Information Management System Based on Cloud Platform.

PubMed

Aijing, L; Jin, Y

2015-12-01

At present, the outdated information management style cannot meet the needs of hospital management, and has become the bottleneck of hospital's management and development. In order to improve the integrated management of information, hospitals have increased their investment in integrated information management systems. On account of the lack of reasonable and scientific design, some hospital integrated information management systems have common problems, such as unfriendly interface, poor portability and maintainability, low security and efficiency, lack of interactivity and information sharing. To solve the problem, this paper carries out the research and design of a hospital information management system based on cloud platform, which can realize the optimized integration of hospital information resources and save money.

UFO (UnFold Operator) computer program abstract

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kissel, L.; Biggs, F.

UFO (UnFold Operator) is an interactive user-oriented computer program designed to solve a wide range of problems commonly encountered in physical measurements. This document provides a summary of the capabilities of version 3A of UFO.

Adaptive Output-Feedback Neural Control of Switched Uncertain Nonlinear Systems With Average Dwell Time.

PubMed

Long, Lijun; Zhao, Jun

2015-07-01

This paper investigates the problem of adaptive neural tracking control via output-feedback for a class of switched uncertain nonlinear systems without the measurements of the system states. The unknown control signals are approximated directly by neural networks. A novel adaptive neural control technique for the problem studied is set up by exploiting the average dwell time method and backstepping. A switched filter and different update laws are designed to reduce the conservativeness caused by adoption of a common observer and a common update law for all subsystems. The proposed controllers of subsystems guarantee that all closed-loop signals remain bounded under a class of switching signals with average dwell time, while the output tracking error converges to a small neighborhood of the origin. As an application of the proposed design method, adaptive output feedback neural tracking controllers for a mass-spring-damper system are constructed.

CometBoards Users Manual Release 1.0

NASA Technical Reports Server (NTRS)

Guptill, James D.; Coroneos, Rula M.; Patnaik, Surya N.; Hopkins, Dale A.; Berke, Lazlo

1996-01-01

Several nonlinear mathematical programming algorithms for structural design applications are available at present. These include the sequence of unconstrained minimizations technique, the method of feasible directions, and the sequential quadratic programming technique. The optimality criteria technique and the fully utilized design concept are two other structural design methods. A project was undertaken to bring all these design methods under a common computer environment so that a designer can select any one of these tools that may be suitable for his/her application. To facilitate selection of a design algorithm, to validate and check out the computer code, and to ascertain the relative merits of the design tools, modest finite element structural analysis programs based on the concept of stiffness and integrated force methods have been coupled to each design method. The code that contains both these design and analysis tools, by reading input information from analysis and design data files, can cast the design of a structure as a minimum-weight optimization problem. The code can then solve it with a user-specified optimization technique and a user-specified analysis method. This design code is called CometBoards, which is an acronym for Comparative Evaluation Test Bed of Optimization and Analysis Routines for the Design of Structures. This manual describes for the user a step-by-step procedure for setting up the input data files and executing CometBoards to solve a structural design problem. The manual includes the organization of CometBoards; instructions for preparing input data files; the procedure for submitting a problem; illustrative examples; and several demonstration problems. A set of 29 structural design problems have been solved by using all the optimization methods available in CometBoards. A summary of the optimum results obtained for these problems is appended to this users manual. CometBoards, at present, is available for Posix-based Cray and Convex computers, Iris and Sun workstations, and the VM/CMS system.

Complex multidisciplinary systems decomposition for aerospace vehicle conceptual design and technology acquisition

NASA Astrophysics Data System (ADS)

Omoragbon, Amen

Although, the Aerospace and Defense (A&D) industry is a significant contributor to the United States' economy, national prestige and national security, it experiences significant cost and schedule overruns. This problem is related to the differences between technology acquisition assessments and aerospace vehicle conceptual design. Acquisition assessments evaluate broad sets of alternatives with mostly qualitative techniques, while conceptual design tools evaluate narrow set of alternatives with multidisciplinary tools. In order for these two fields to communicate effectively, a common platform for both concerns is desired. This research is an original contribution to a three-part solution to this problem. It discusses the decomposition step of an innovation technology and sizing tool generation framework. It identifies complex multidisciplinary system definitions as a bridge between acquisition and conceptual design. It establishes complex multidisciplinary building blocks that can be used to build synthesis systems as well as technology portfolios. It also describes a Graphical User Interface Designed to aid in decomposition process. Finally, it demonstrates an application of the methodology to a relevant acquisition and conceptual design problem posed by the US Air Force.

Lessons Learned from Applying Design Thinking in a NASA Rapid Design Study in Aeronautics

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria; Bakula, Casey; Castner, Raymond

2017-01-01

In late 2015, NASA's Aeronautics Research Mission Directorate (ARMD) funded an experiment in rapid design and rapid teaming to explore new approaches to solving challenging design problems in aeronautics in an effort to cultivate and foster innovation. This report summarizes several lessons learned from the rapid design portion of the study. This effort entailed learning and applying design thinking, a human-centered design approach, to complete the conceptual design for an open-ended design challenge within six months. The design challenge focused on creating a capability to advance experimental testing of autonomous aeronautics systems, an area of great interest to NASA, the US government as a whole, and an entire ecosystem of users and developers around the globe. A team of nine civil servant researchers from three of NASA's aeronautics field centers with backgrounds in several disciplines was assembled and rapidly trained in design thinking under the guidance of the innovation and design firm IDEO. The design thinking process, while used extensively outside the aerospace industry, is less common and even counter to many practices within the aerospace industry. In this report, several contrasts between common aerospace research and development practices and design thinking are discussed, drawing upon the lessons learned from the NASA rapid design study. The lessons discussed included working towards a design solution without a set of detailed design requirements, which may not be practical or even feasible for management to ascertain for complex, challenging problems. This approach allowed for the possibility of redesigning the original problem statement to better meet the needs of the users. Another lesson learned was to approach problems holistically from the perspective of the needs of individuals that may be affected by advances in topic area instead of purely from a technological feasibility viewpoint. The interdisciplinary nature of the design team also provided valuable experience by allowing team members from different technological backgrounds to work side-by-side instead of dividing into smaller teams, as is frequently done in traditional multidisciplinary design. The team also learned how to work with qualitative data obtained primarily through the 70-plus interviews that were conducted over the course of this project, which was a sharp contrast to using quantitative data with regards to identifying, capturing, analyzing, storing, and recalling the data. When identifying potential interviewees who may have useful contributions to the design subject area, the team found great value in talking to non-traditional users and potential beneficiaries of autonomous aeronautics systems whose impact on the aeronautics autonomy ecosystem is growing swiftly. Finally, the team benefitted from using "sacrificial prototyping," which is a method of rapidly prototyping draft concepts and ideas with the intent of enabling potential users to provide significant feedback early in the design process. This contrasts the more common approach of using expensive prototypes that focus on demonstrating technical feasibility. The unique design approach and lessons learned by the team throughout this process culminated in a final design concept that was quite different than what the team originally assumed would be the design concept initially. A summary of the more usercentered final design concept is also provided.

Making intelligent systems team players: Overview for designers

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra L.

1992-01-01

This report is a guide and companion to the NASA Technical Memorandum 104738, 'Making Intelligent Systems Team Players,' Volumes 1 and 2. The first two volumes of this Technical Memorandum provide comprehensive guidance to designers of intelligent systems for real-time fault management of space systems, with the objective of achieving more effective human interaction. This report provides an analysis of the material discussed in the Technical Memorandum. It clarifies what it means for an intelligent system to be a team player, and how such systems are designed. It identifies significant intelligent system design problems and their impacts on reliability and usability. Where common design practice is not effective in solving these problems, we make recommendations for these situations. In this report, we summarize the main points in the Technical Memorandum and identify where to look for further information.

Evolutionary engineering for industrial microbiology.

PubMed

Vanee, Niti; Fisher, Adam B; Fong, Stephen S

2012-01-01

Superficially, evolutionary engineering is a paradoxical field that balances competing interests. In natural settings, evolution iteratively selects and enriches subpopulations that are best adapted to a particular ecological niche using random processes such as genetic mutation. In engineering desired approaches utilize rational prospective design to address targeted problems. When considering details of evolutionary and engineering processes, more commonality can be found. Engineering relies on detailed knowledge of the problem parameters and design properties in order to predict design outcomes that would be an optimized solution. When detailed knowledge of a system is lacking, engineers often employ algorithmic search strategies to identify empirical solutions. Evolution epitomizes this iterative optimization by continuously diversifying design options from a parental design, and then selecting the progeny designs that represent satisfactory solutions. In this chapter, the technique of applying the natural principles of evolution to engineer microbes for industrial applications is discussed to highlight the challenges and principles of evolutionary engineering.

Exploration on the matching between Optical Comprehensive Design Experiment and Washington Accord

NASA Astrophysics Data System (ADS)

Cao, Yiping; Chen, Wenjing; Zhang, Qican; Liu, Yuankun; Li, Dahai; Zhou, Xinzhi; Wei, Jun

2017-08-01

Common problems faced in optical comprehensive design experiment and going against the Washington Accord are pointed out. For resolving these problems, an instructional and innovative teaching scheme for Optics Comprehensive Design Experiment is proposed. We would like to understand the student that can improve the hands-on practical ability, theory knowledge understanding ability, complex problem solving ability, engineering application ability, cooperative ability after tracking and researching the student who have attended the class about Optical Comprehensive Design Experiment, We found that there are some problems on the course such as the experiment content vague, the student beginning less time, phase separation theory and engineering application, the experiment content lack of selectivity and so on. So we have made some improvements reference to the Washington Accord for the class teaching plan about Optical Comprehensive Design Experiment. This class must relevant to the engineering basic courses, professional foundation course and the major courses, so far as to the future study and work that which can play a role in inheriting and continuity to the students. The Optical Comprehensive Design Experiment teaching program requires students learning this course to have learnt basic courses like analog electronics technique, digital electronic technique, applied optics and computer and other related courses which students are required to comprehensively utilize. This teaching scheme contains six practical complex engineering problems which are respectively optical system design, light energy meter design, illuminometer design, material refractive index measuring system design, light intensity measuring system design and open design. Establishing the optional experiment and open experiment can provide students with a greater choice and enhance the students' creativity, vivid teaching experimental teachers and enriching contents of experiment can make the experiment more interesting, providing students with more opportunities to conduct experiment and improving students' practical ability with long learning time, putting emphasis on student's understanding of complex engineering problems and the cognitive of the process to solve complex engineering problems with actual engineering problems. Applying the scheme in other courses and improving accordingly will be able to ensure the quality of engineering education. Look forward to offering useful reference for the curriculum system construction in colleges and universities.

Rural Services.

ERIC Educational Resources Information Center

Miller, Jon, Ed.; And Others

Presented are 10 papers resulting from a workshop, involving representatives from 33 state developmental disabilities councils, designed to examine common problems and issues confronting developmentally disabled citizens in rural areas. Entries include the following titles and authors: "Who, What, and Where--Studying Prevalence of Developmental…

Setting the Pressure at Which to Conduct a Distillation.

ERIC Educational Resources Information Center

Barduhn, Allen J.

1984-01-01

Discusses how pressure setting is determined for distillation columns, examining factors which must be considered when optimizing design for economical balance. Also discusses the basics of heat exchangers and cites a common problem with pressure differences. (JM)

Evaluation of Asphalt Pavement Analyzer for HMA Design

DOT National Transportation Integrated Search

1999-06-01

Rutting is a common problem in hot mix asphalt pavements, particularly in hot climates and at intersections. The Asphalt Pavement Analyzer (APA) is a laboratory accelerated loading equipment that can be used to evaluate rutting potential of HMA. This...

Minimum envelope roughness pulse design for reduced amplifier distortion in parallel excitation.

PubMed

Grissom, William A; Kerr, Adam B; Stang, Pascal; Scott, Greig C; Pauly, John M

2010-11-01

Parallel excitation uses multiple transmit channels and coils, each driven by independent waveforms, to afford the pulse designer an additional spatial encoding mechanism that complements gradient encoding. In contrast to parallel reception, parallel excitation requires individual power amplifiers for each transmit channel, which can be cost prohibitive. Several groups have explored the use of low-cost power amplifiers for parallel excitation; however, such amplifiers commonly exhibit nonlinear memory effects that distort radio frequency pulses. This is especially true for pulses with rapidly varying envelopes, which are common in parallel excitation. To overcome this problem, we introduce a technique for parallel excitation pulse design that yields pulses with smoother envelopes. We demonstrate experimentally that pulses designed with the new technique suffer less amplifier distortion than unregularized pulses and pulses designed with conventional regularization.

Library Media Facilities Access: Do You Really Want Your Library Media Center Used?

ERIC Educational Resources Information Center

Hart, Thomas L.

2005-01-01

In this article, the author discusses and provides some examples on how students and teachers should use library media centers. He also discusses the common problems with facilities design as it changes along with other aspects of society. He states that flexibility in design ensures that the physical facility will meet future program needs.…

Design and Validation of a Photographic Expressive Persian Grammar Test for Children Aged 4-6 Years

ERIC Educational Resources Information Center

Haresabadi, Fatemeh; Ebadi, Abbas; Shirazi, Tahereh Sima; Dastjerdi Kazemi, Mehdi

2016-01-01

Syntax has a high importance among linguistic parameters, and syntax-related problems are the most common in language disorders. Therefore, the present study aimed to design a Photographic Expressive Persian Grammar Test for Iranian children in the age group of 4-6 years and to determine its validity and reliability. First, the target…

Remotely Telling Humans and Computers Apart: An Unsolved Problem

NASA Astrophysics Data System (ADS)

Hernandez-Castro, Carlos Javier; Ribagorda, Arturo

The ability to tell humans and computers apart is imperative to protect many services from misuse and abuse. For this purpose, tests called CAPTCHAs or HIPs have been designed and put into production. Recent history shows that most (if not all) can be broken given enough time and commercial interest: CAPTCHA design seems to be a much more difficult problem than previously thought. The assumption that difficult-AI problems can be easily converted into valid CAPTCHAs is misleading. There are also some extrinsic problems that do not help, especially the big number of in-house designs that are put into production without any prior public critique. In this paper we present a state-of-the-art survey of current HIPs, including proposals that are now into production. We classify them regarding their basic design ideas. We discuss current attacks as well as future attack paths, and we also present common errors in design, and how many implementation flaws can transform a not necessarily bad idea into a weak CAPTCHA. We present examples of these flaws, using specific well-known CAPTCHAs. In a more theoretical way, we discuss the threat model: confronted risks and countermeasures. Finally, we introduce and discuss some desirable properties that new HIPs should have, concluding with some proposals for future work, including methodologies for design, implementation and security assessment.

Current trends in dental implants

PubMed Central

Gaviria, Laura; Salcido, John Paul; Guda, Teja

2014-01-01

Tooth loss is very a very common problem; therefore, the use of dental implants is also a common practice. Although research on dental implant designs, materials and techniques has increased in the past few years and is expected to expand in the future, there is still a lot of work involved in the use of better biomaterials, implant design, surface modification and functionalization of surfaces to improve the long-term outcomes of the treatment. This paper provides a brief history and evolution of dental implants. It also describes the types of implants that have been developed, and the parameters that are presently used in the design of dental implants. Finally, it describes the trends that are employed to improve dental implant surfaces, and current technologies used for the analysis and design of the implants. PMID:24868501

National Strategies for Curriculum Development.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and Oceania.

Officials responsible for designing and introducing curriculum innovation in countries participating in the Asian Programme of Education Innovation for Development (APEID) met in Australia in September 1979 to exchange experiences and explore problems and issues of common interest. Conference participants, representing educational ministries or…

Our Common Cause

ERIC Educational Resources Information Center

Eklund, Lowell

1976-01-01

Adult educators, providing necessary lifelong, comprehensive education, face the major imperative of solving the problem of racism. Numerous other imperatives concerning program design and content must be fulfilled in effectively meeting adult learners' needs. Guidance from the principles expressed in a proposed adult educator's Hippocratic Oath…

Commercial and Residential Water Damage: The Mold Connection.

ERIC Educational Resources Information Center

Williams, Del

2002-01-01

Describes the problem of toxic mold in residential and commercial property resulting from excess moisture. Includes common sources of unwanted moisture, design and construction flaws, determining the presence of mold, and advice for identifying and hiring reputable mold remediators. (PKP)

An n -material thresholding method for improving integerness of solutions in topology optimization

DOE PAGES

Watts, Seth; Tortorelli, Daniel A.

2016-04-10

It is common in solving topology optimization problems to replace an integer-valued characteristic function design field with the material volume fraction field, a real-valued approximation of the design field that permits "fictitious" mixtures of materials during intermediate iterations in the optimization process. This is reasonable so long as one can interpolate properties for such materials and so long as the final design is integer valued. For this purpose, we present a method for smoothly thresholding the volume fractions of an arbitrary number of material phases which specify the design. This method is trivial for two-material design problems, for example, themore » canonical topology design problem of specifying the presence or absence of a single material within a domain, but it becomes more complex when three or more materials are used, as often occurs in material design problems. We take advantage of the similarity in properties between the volume fractions and the barycentric coordinates on a simplex to derive a thresholding, method which is applicable to an arbitrary number of materials. As we show in a sensitivity analysis, this method has smooth derivatives, allowing it to be used in gradient-based optimization algorithms. Finally, we present results, which show synergistic effects when used with Solid Isotropic Material with Penalty and Rational Approximation of Material Properties material interpolation functions, popular methods of ensuring integerness of solutions.« less

Design of the Hospital Integrated Information Management System Based on Cloud Platform

PubMed Central

Aijing, L; Jin, Y

2015-01-01

ABSTRACT At present, the outdated information management style cannot meet the needs of hospital management, and has become the bottleneck of hospital's management and development. In order to improve the integrated management of information, hospitals have increased their investment in integrated information management systems. On account of the lack of reasonable and scientific design, some hospital integrated information management systems have common problems, such as unfriendly interface, poor portability and maintainability, low security and efficiency, lack of interactivity and information sharing. To solve the problem, this paper carries out the research and design of a hospital information management system based on cloud platform, which can realize the optimized integration of hospital information resources and save money. PMID:27399033

On the decoding process in ternary error-correcting output codes.

PubMed

Escalera, Sergio; Pujol, Oriol; Radeva, Petia

2010-01-01

A common way to model multiclass classification problems is to design a set of binary classifiers and to combine them. Error-Correcting Output Codes (ECOC) represent a successful framework to deal with these type of problems. Recent works in the ECOC framework showed significant performance improvements by means of new problem-dependent designs based on the ternary ECOC framework. The ternary framework contains a larger set of binary problems because of the use of a "do not care" symbol that allows us to ignore some classes by a given classifier. However, there are no proper studies that analyze the effect of the new symbol at the decoding step. In this paper, we present a taxonomy that embeds all binary and ternary ECOC decoding strategies into four groups. We show that the zero symbol introduces two kinds of biases that require redefinition of the decoding design. A new type of decoding measure is proposed, and two novel decoding strategies are defined. We evaluate the state-of-the-art coding and decoding strategies over a set of UCI Machine Learning Repository data sets and into a real traffic sign categorization problem. The experimental results show that, following the new decoding strategies, the performance of the ECOC design is significantly improved.

Generalized Centroid Estimators in Bioinformatics

PubMed Central

Hamada, Michiaki; Kiryu, Hisanori; Iwasaki, Wataru; Asai, Kiyoshi

2011-01-01

In a number of estimation problems in bioinformatics, accuracy measures of the target problem are usually given, and it is important to design estimators that are suitable to those accuracy measures. However, there is often a discrepancy between an employed estimator and a given accuracy measure of the problem. In this study, we introduce a general class of efficient estimators for estimation problems on high-dimensional binary spaces, which represent many fundamental problems in bioinformatics. Theoretical analysis reveals that the proposed estimators generally fit with commonly-used accuracy measures (e.g. sensitivity, PPV, MCC and F-score) as well as it can be computed efficiently in many cases, and cover a wide range of problems in bioinformatics from the viewpoint of the principle of maximum expected accuracy (MEA). It is also shown that some important algorithms in bioinformatics can be interpreted in a unified manner. Not only the concept presented in this paper gives a useful framework to design MEA-based estimators but also it is highly extendable and sheds new light on many problems in bioinformatics. PMID:21365017

A methodology for commonality analysis, with applications to selected space station systems

NASA Technical Reports Server (NTRS)

Thomas, Lawrence Dale

1989-01-01

The application of commonality in a system represents an attempt to reduce costs by reducing the number of unique components. A formal method for conducting commonality analysis has not been established. In this dissertation, commonality analysis is characterized as a partitioning problem. The cost impacts of commonality are quantified in an objective function, and the solution is that partition which minimizes this objective function. Clustering techniques are used to approximate a solution, and sufficient conditions are developed which can be used to verify the optimality of the solution. This method for commonality analysis is general in scope. It may be applied to the various types of commonality analysis required in the conceptual, preliminary, and detail design phases of the system development cycle.

Evaluation of concrete bridge mix designs for control of cracking, phase I.

DOT National Transportation Integrated Search

2014-11-01

Cracking of concrete is a common problem with concrete structures such as bridge decks, pavements and bridge : rail. The Agency of Transportation (VTrans) has recently invested in higher performing concrete mixes that are : more impervious and has hi...

ESTIMATING PROPORTION OF AREA OCCUPIED UNDER COMPLEX SURVEY DESIGNS

EPA Science Inventory

Estimating proportion of sites occupied, or proportion of area occupied (PAO) is a common problem in environmental studies. Typically, field surveys do not ensure that occupancy of a site is made with perfect detection. Maximum likelihood estimation of site occupancy rates when...

Causative factors of cost overrun in highway projects of Sindh province of Pakistan

NASA Astrophysics Data System (ADS)

Sohu, S.; Halid, A.; Nagapan, S.; Fattah, A.; Latif, I.; Ullah, K.

2017-11-01

Cost overrun is an increase of cost of project from approved budget which was signed by parties at the time of tender. Cost overrun in construction of highway projects is a common problem worldwide and construction industry of Pakistan is also facing this crucial problem of cost overrun in highway projects of Pakistan. The main objective of this research is to identify the causative factors of cost overrun in highway projects of Sindh province of Pakistan. A well designed questionnaire was developed based on 64 common factors of cost overrun from literature review. Developed questionnaire was distributed among selected 30 experts from owner/client, designer/consultant and contractor who have experience more than 20 years’ experience in highway projects. The collected data was statistical analyzed. After analysis results showed that delay process in payment by client, inadequate planning, client interference, poor contract management, delay of decision making, change of scope of project and financial problems faced by client were most causative factors of cost overrun in highway projects. This research will provide alertness to stakeholders of highway projects of Sindh province to avoid cost overrun in projects.

We get the algorithms of our ground truths: Designing referential databases in digital image processing

PubMed Central

Jaton, Florian

2017-01-01

This article documents the practical efforts of a group of scientists designing an image-processing algorithm for saliency detection. By following the actors of this computer science project, the article shows that the problems often considered to be the starting points of computational models are in fact provisional results of time-consuming, collective and highly material processes that engage habits, desires, skills and values. In the project being studied, problematization processes lead to the constitution of referential databases called ‘ground truths’ that enable both the effective shaping of algorithms and the evaluation of their performances. Working as important common touchstones for research communities in image processing, the ground truths are inherited from prior problematization processes and may be imparted to subsequent ones. The ethnographic results of this study suggest two complementary analytical perspectives on algorithms: (1) an ‘axiomatic’ perspective that understands algorithms as sets of instructions designed to solve given problems computationally in the best possible way, and (2) a ‘problem-oriented’ perspective that understands algorithms as sets of instructions designed to computationally retrieve outputs designed and designated during specific problematization processes. If the axiomatic perspective on algorithms puts the emphasis on the numerical transformations of inputs into outputs, the problem-oriented perspective puts the emphasis on the definition of both inputs and outputs. PMID:28950802

Can work make you mentally ill? A systematic meta-review of work-related risk factors for common mental health problems.

PubMed

Harvey, Samuel B; Modini, Matthew; Joyce, Sadhbh; Milligan-Saville, Josie S; Tan, Leona; Mykletun, Arnstein; Bryant, Richard A; Christensen, Helen; Mitchell, Philip B

2017-03-01

It has been suggested that certain types of work may increase the risk of common mental disorders, but the exact nature of the relationship has been contentious. The aim of this paper is to conduct the first comprehensive systematic meta-review of the evidence linking work to the development of common mental health problems, specifically depression, anxiety and/or work-related stress and to consider how the risk factors identified may relate to each other. MEDLINE, PsychInfo, Embase, the Cochrane Collaboration and grey literature databases were systematically searched for review articles that examined work-based risk factors for common mental health problems. All included reviews were subjected to a quality appraisal. 37 review studies were identified, of which 7 were at least moderate quality. 3 broad categories of work-related factors were identified to explain how work may contribute to the development of depression and/or anxiety: imbalanced job design, occupational uncertainty and lack of value and respect in the workplace. Within these broad categories, there was moderate level evidence from multiple prospective studies that high job demands, low job control, high effort-reward imbalance, low relational justice, low procedural justice, role stress, bullying and low social support in the workplace are associated with a greater risk of developing common mental health problems. While methodological limitations continue to preclude more definitive statements on causation between work and mental disorders, there is now a range of promising targets for individual and organisational-level interventions aimed at minimising mental health problems in the workplace. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Prenatal Care.

ERIC Educational Resources Information Center

Health Resources and Services Administration (DHHS/PHS), Rockville, MD. Office for Maternal and Child Health Services.

This booklet is the first in a series of publications designed to provide parents with useful information about childrearing. Contents are organized into three parts. Part I focuses on the pregnancy, prenatal care, development of the baby, pregnant lifestyles, nutrition, common discomforts, and problems of pregnancy. Part II provides information…

Guidelines for determining the capacity of d-regions with premature concrete deterioration of ASR/DEF.

DOT National Transportation Integrated Search

2012-11-01

When a bridge engineer encounters a design or analysis problem concerning a bridge substructure, that structure will commonly have a mixture of member types, some slender, and some squat. Slender members are generally governed by flexure, and normal ...

New Ideas for School Construction.

ERIC Educational Resources Information Center

Producers' Council, Inc., Washington, DC.

Present educators, architects, engineers, and building product manufacturers with a medium of common interest for discussion of mutual school construction problems, objectives, needs, ideas, capabilities and limitations. Contents include--(1) modern wood construction, (2) school room in a steel mill, (3) masonry in new school design, (4) the…

Introduction to Studies in Granular Mixing

ERIC Educational Resources Information Center

Llusa, Marcos; Muzzio, Fernando

2008-01-01

This article describes a hands-on educational activity designed to introduce students (or industrial employees) in the pharmaceutical arena to some of the most common problems in the mixing of solids: Active Pharmaceutical Ingredient (API) and lubricant (i.e. magnesium stearate) homogenization, characterization of segregation tendencies, and…

Guidelines for analyzing the capacity of d-regions with premature concrete deterioration of ASR/DEF.

DOT National Transportation Integrated Search

2015-03-01

When a bridge engineer encounters a design or analysis problem concerning a bridge substructure, : that structure will commonly have a mixture of member types, some slender, and some squat. : Slender members are generally governed by flexure, and nor...

Adding Support to the ALMA Common Software for Real-Time Operations through the Usage of a POSIX-Compliant RTOS

NASA Astrophysics Data System (ADS)

Tobar, R. J.; von Brand, H.; Araya, M. A.; Juerges, T.

2010-12-01

The ALMA Common Software (ACS) framework lacks of the real-time capabilities to control the antennas’ instrumentation — as has been probed by previous works — which has lead to non-portable workarounds to the problem. Indeed, the time service used in ACS, based in the Container/Component model, presents plenty of results that confirm this statement. This work addresses the problem of design and integrate a real-time service for ACS, providing to the framework an implementation such that the control operations over the different instruments could be done within real-time constraints. This implementation is compared with the current time service, showing the difference between the two systems when subjecting them to common scenarios. Also, the new implementation is done following the POSIX specification, ensuring interoperability and portability through different operating systems.

Common Criteria Related Security Design Patterns for Intelligent Sensors—Knowledge Engineering-Based Implementation

PubMed Central

Bialas, Andrzej

2011-01-01

Intelligent sensors experience security problems very similar to those inherent to other kinds of IT products or systems. The assurance for these products or systems creation methodologies, like Common Criteria (ISO/IEC 15408) can be used to improve the robustness of the sensor systems in high risk environments. The paper presents the background and results of the previous research on patterns-based security specifications and introduces a new ontological approach. The elaborated ontology and knowledge base were validated on the IT security development process dealing with the sensor example. The contribution of the paper concerns the application of the knowledge engineering methodology to the previously developed Common Criteria compliant and pattern-based method for intelligent sensor security development. The issue presented in the paper has a broader significance in terms that it can solve information security problems in many application domains. PMID:22164064

Common criteria related security design patterns for intelligent sensors--knowledge engineering-based implementation.

PubMed

Bialas, Andrzej

2011-01-01

Intelligent sensors experience security problems very similar to those inherent to other kinds of IT products or systems. The assurance for these products or systems creation methodologies, like Common Criteria (ISO/IEC 15408) can be used to improve the robustness of the sensor systems in high risk environments. The paper presents the background and results of the previous research on patterns-based security specifications and introduces a new ontological approach. The elaborated ontology and knowledge base were validated on the IT security development process dealing with the sensor example. The contribution of the paper concerns the application of the knowledge engineering methodology to the previously developed Common Criteria compliant and pattern-based method for intelligent sensor security development. The issue presented in the paper has a broader significance in terms that it can solve information security problems in many application domains.

A restricted Steiner tree problem is solved by Geometric Method II

NASA Astrophysics Data System (ADS)

Lin, Dazhi; Zhang, Youlin; Lu, Xiaoxu

2013-03-01

The minimum Steiner tree problem has wide application background, such as transportation system, communication network, pipeline design and VISL, etc. It is unfortunately that the computational complexity of the problem is NP-hard. People are common to find some special problems to consider. In this paper, we first put forward a restricted Steiner tree problem, which the fixed vertices are in the same side of one line L and we find a vertex on L such the length of the tree is minimal. By the definition and the complexity of the Steiner tree problem, we know that the complexity of this problem is also Np-complete. In the part one, we have considered there are two fixed vertices to find the restricted Steiner tree problem. Naturally, we consider there are three fixed vertices to find the restricted Steiner tree problem. And we also use the geometric method to solve such the problem.

Lunar crane hook

NASA Technical Reports Server (NTRS)

Cash, John Wilson, III; Cone, Alan E.; Garolera, Frank J.; German, David; Lindabury, David Peter; Luckado, Marshall Cleveland; Murphey, Craig; Rowell, John Bryan; Wilkinson, Brad

1988-01-01

The base and ball hook system is an attachment that is designed to be used on the lunar surface as an improved alternative to the common crane hook and eye system. The design proposed uses an omni-directional ball hook and base to overcome the design problems associated with a conventional crane hook. The base and ball hook is not sensitive to cable twist which would render a robotic lunar crane useless since there is little atmospheric resistance to dampen the motion of an oscillating member. The symmetric characteristics of the ball hook and base eliminates manual placement of the ball hook into the base; commonly associated with the typical hook and eye stem. The major advantage of the base and ball hook system is it's ease of couple and uncouple modes that are advantages during unmanned robotic lunar missions.

'Can he have the test for bipolar, doctor? His dad's got it': exploring the potential of general practitioners to work with children and young people presenting in primary care with common mental health problems - a clinical initiative.

PubMed

Roberts, Jane H; Bernard, Paul M

2012-06-01

Background General practitioners (GPs) play a key role in assessing and managing adult mental health problems, but this input is not seen in their management of child and adolescent mental health. Mental health problems in 5-19-year-olds are common, yet detection rates in primary care are low. The symptoms of most adult diagnoses of mental health problems are present by mid-adolescence, yet the typical time from onset to diagnosis is 5-15 years. The role of general practice in this area has been underexplored. Aim This pilot study explores the potential of GPs to respond to common mental health problems in children and adolescents. Design Children and young people who would have ordinarily been referred to Child and Adolescent Mental Health Services (CAMHS) were seen in a GP setting. In a UK general practice surgery serving a disadvantaged population. Method Children and young people were seen for an initial biopsychosocial assessment and formulation of the presenting concerns. GP-based interventions were offered as appropriate or referred to CAMHS. Results Data from the first 50 children (2-19 years) are presented. Twenty younger children (10 years and under) and 30 older children (11 years and above) were seen. Eighteen referrals were made to CAMHS. GP interventions included watchful waiting, brief behavioural interventions, non-directive counselling, brief cognitive- behavioural therapy (CBT) and liaison with colleagues in education, CAMHS and the voluntary sector. Conclusion This clinical pilot demonstrates that with adequate time, access to supervision and practice support, children and young people experiencing emotional and behavioural problems associated with common mental health issues can be helped in primary care.

A Systematic Review of Behavioral Health Interventions for Sex Offenders With Intellectual Disabilities

PubMed Central

Marotta, Phillip L.

2015-01-01

This article reviews evaluation studies of programs designed to treat sex offenders with intellectual and developmental disabilities (IDD) published in peer-reviewed journals between 1994 and 2014. The design of this study is mirrored after PRISMA (Preferred Reporting of Items for Systematic Reviews and Meta-Analyses) recommendations for conducting a systematic literature review. The study design, study setting, characteristics of participants, type of treatment, and intervention procedures comprise areas of focus for evaluating the implementation of treatment programs. Therapeutic outcomes include changes in attitudes consistent with sex offending, victim empathy, sexual knowledge, cognitive distortions, and problem sexual behaviors. Eighteen treatment evaluation studies were identified from the United States, the United Kingdom, Australia, and New Zealand. Cognitive-behavioral treatments were the most commonly delivered treatment modality to sex offenders with IDD. Other less common treatments were dialectical behavioral therapy, problem solving therapy, mindfulness, and relapse prevention. No randomized controlled trials were identified. The most common designs were multiple case studies and pre- and post-treatment assessments with no control and repeated measures follow-up. Small sample sizes, no control groups, and wide variation in treatment length and follow-up time complicate the qualitative synthesis of study findings. Short follow-up times introduce the potential for bias in conclusions surrounding treatment efficacy for many of the studies reviewed in this analysis. The overall quality of studies examining treatments for sex offenders with IDD is poor and requires further development before rendering firm conclusions about the effectiveness of interventions for this population. PMID:25667227

Staff Development.

ERIC Educational Resources Information Center

Purcell, Larry O.

Staff development programs and activities are common methods of stimulating change in the behavior of educators. These programs may be designed for a number of purposes, including (1) problem-solving within the local school or district; (2) remediation to develop work-related skills; (3) motivation to change and improve staff; and (4) development…

COMPUTER AIDED DESIGN OF REPLACEMENT SOLVENTS UNDER VARYING ENVIRONMENTAL CONSTRAINTS

EPA Science Inventory

There is a great need to replace many solvents that are commonly used by industry and the public, but whose continued use entails a number of human health and environmental risks. One problem hampering solvent replacement is the thought that replacement, particularly for environm...

DESIGN INFORMATION REPORT: PROTECTION OF WASTEWATER LAGOON INTERIOR SLOPES

EPA Science Inventory

A problem common to many wastewater treatment and storage lagoons is erosion of the interior slopes. Erosion may be caused by surface runoff and wind-induced wave action. The soils that compose the steep interior slopes of lagoons are especially susceptible to erosion and slumpin...

The Relationship between User Expertise and Structural Ontology Characteristics

ERIC Educational Resources Information Center

Waldstein, Ilya Michael

2014-01-01

Ontologies are commonly used to support application tasks such as natural language processing, knowledge management, learning, browsing, and search. Literature recommends considering specific context during ontology design, and highlights that a different context is responsible for problems in ontology reuse. However, there is still no clear…

EVALUATING AND DESIGNING CHEMICAL PROCESSES FOR ENVIRONMENTAL SUSTAINABILITY

EPA Science Inventory

Chemicals and chemical processes are at the heart of most environmental problems. This isn't surprising since chemicals make up all of the products we use in our lives. The common use of cjhemicals makes them of high interest for systems analysis, particularly because of environ...

Learning to Troubleshoot: A New Theory-Based Design Architecture

ERIC Educational Resources Information Center

Jonassen, David H.; Hung, Woei

2006-01-01

Troubleshooting is a common form of problem solving. Technicians (e.g., automotive mechanics, electricians) and professionals (physician, therapists, ombudspersons) diagnose faulty systems and take direct, corrective action to eliminate any faults in order to return the systems to their normal states. Traditional approaches to troubleshooting…

Intelligent Tracking Control for a Class of Uncertain High-Order Nonlinear Systems.

PubMed

Zhao, Xudong; Shi, Peng; Zheng, Xiaolong; Zhang, Jianhua

2016-09-01

This brief is concerned with the problem of intelligent tracking control for a class of high-order nonlinear systems with completely unknown nonlinearities. An intelligent adaptive control algorithm is presented by combining the adaptive backstepping technique with the neural networks' approximation ability. It is shown that the practical output tracking performance of the system is achieved using the proposed state-feedback controller under two mild assumptions. In particular, by introducing a parameter in the derivations, the tracking error between the time-varying target signal and the output can be reduced via tuning the controller design parameters. Moreover, in order to solve the problem of overparameterization, which is a common issue in adaptive control design, a controller with one adaptive law is also designed. Finally, simulation results are given to show the effectiveness of the theoretical approaches and the potential of the proposed new design techniques.

Lessons Learned From the Development, Operation, and Review of Mechanical Systems on the Space Shuttle, International Space Station, and Payloads

NASA Technical Reports Server (NTRS)

Dinsel, Alison; Jermstad, Wayne; Robertson, Brandan

2006-01-01

The Mechanical Design and Analysis Branch at the Johnson Space Center (JSC) is responsible for the technical oversight of over 30 mechanical systems flying on the Space Shuttle Orbiter and the International Space Station (ISS). The branch also has the responsibility for reviewing all mechanical systems on all Space Shuttle and International Space Station payloads, as part of the payload safety review process, through the Mechanical Systems Working Group (MSWG). These responsibilities give the branch unique insight into a large number of mechanical systems, and problems encountered during their design, testing, and operation. This paper contains narrative descriptions of lessons learned from some of the major problems worked on by the branch during the last two years. The problems are grouped into common categories and lessons learned are stated.

Parts, Materials, and Processes Experience Summary. Volume 1; [Catalog of ALERT and Other Information on Basic Design, Reliability, Quality and Applications Programs

NASA Technical Reports Server (NTRS)

1973-01-01

The ALERT program, a system for communicating common problems with parts, materials, and processes, is condensed and catalogued. Expanded information on selected topics is provided by relating the problem area (failure) to the cause, the investigations and findings, the suggestions for avoidance (inspections, screening tests, proper part applications), and failure analysis procedures. The basic objective of ALERT is the avoidance of the recurrence of parts, materials, and processed problems, thus improving the reliability of equipment produced for and used by the government.

Primal-dual techniques for online algorithms and mechanisms

NASA Astrophysics Data System (ADS)

Liaghat, Vahid

An offline algorithm is one that knows the entire input in advance. An online algorithm, however, processes its input in a serial fashion. In contrast to offline algorithms, an online algorithm works in a local fashion and has to make irrevocable decisions without having the entire input. Online algorithms are often not optimal since their irrevocable decisions may turn out to be inefficient after receiving the rest of the input. For a given online problem, the goal is to design algorithms which are competitive against the offline optimal solutions. In a classical offline scenario, it is often common to see a dual analysis of problems that can be formulated as a linear or convex program. Primal-dual and dual-fitting techniques have been successfully applied to many such problems. Unfortunately, the usual tricks come short in an online setting since an online algorithm should make decisions without knowing even the whole program. In this thesis, we study the competitive analysis of fundamental problems in the literature such as different variants of online matching and online Steiner connectivity, via online dual techniques. Although there are many generic tools for solving an optimization problem in the offline paradigm, in comparison, much less is known for tackling online problems. The main focus of this work is to design generic techniques for solving integral linear optimization problems where the solution space is restricted via a set of linear constraints. A general family of these problems are online packing/covering problems. Our work shows that for several seemingly unrelated problems, primal-dual techniques can be successfully applied as a unifying approach for analyzing these problems. We believe this leads to generic algorithmic frameworks for solving online problems. In the first part of the thesis, we show the effectiveness of our techniques in the stochastic settings and their applications in Bayesian mechanism design. In particular, we introduce new techniques for solving a fundamental linear optimization problem, namely, the stochastic generalized assignment problem (GAP). This packing problem generalizes various problems such as online matching, ad allocation, bin packing, etc. We furthermore show applications of such results in the mechanism design by introducing Prophet Secretary, a novel Bayesian model for online auctions. In the second part of the thesis, we focus on the covering problems. We develop the framework of "Disk Painting" for a general class of network design problems that can be characterized by proper functions. This class generalizes the node-weighted and edge-weighted variants of several well-known Steiner connectivity problems. We furthermore design a generic technique for solving the prize-collecting variants of these problems when there exists a dual analysis for the non-prize-collecting counterparts. Hence, we solve the online prize-collecting variants of several network design problems for the first time. Finally we focus on designing techniques for online problems with mixed packing/covering constraints. We initiate the study of degree-bounded graph optimization problems in the online setting by designing an online algorithm with a tight competitive ratio for the degree-bounded Steiner forest problem. We hope these techniques establishes a starting point for the analysis of the important class of online degree-bounded optimization on graphs.

Complexities and potential pitfalls of clinical study design and data analysis in assisted reproduction.

PubMed

Patounakis, George; Hill, Micah J

2018-06-01

The purpose of the current review is to describe the common pitfalls in design and statistical analysis of reproductive medicine studies. It serves to guide both authors and reviewers toward reducing the incidence of spurious statistical results and erroneous conclusions. The large amount of data gathered in IVF cycles leads to problems with multiplicity, multicollinearity, and over fitting of regression models. Furthermore, the use of the word 'trend' to describe nonsignificant results has increased in recent years. Finally, methods to accurately account for female age in infertility research models are becoming more common and necessary. The pitfalls of study design and analysis reviewed provide a framework for authors and reviewers to approach clinical research in the field of reproductive medicine. By providing a more rigorous approach to study design and analysis, the literature in reproductive medicine will have more reliable conclusions that can stand the test of time.

A comparative study of controlled random search algorithms with application to inverse aerofoil design

NASA Astrophysics Data System (ADS)

Manzanares-Filho, N.; Albuquerque, R. B. F.; Sousa, B. S.; Santos, L. G. C.

2018-06-01

This article presents a comparative study of some versions of the controlled random search algorithm (CRSA) in global optimization problems. The basic CRSA, originally proposed by Price in 1977 and improved by Ali et al. in 1997, is taken as a starting point. Then, some new modifications are proposed to improve the efficiency and reliability of this global optimization technique. The performance of the algorithms is assessed using traditional benchmark test problems commonly invoked in the literature. This comparative study points out the key features of the modified algorithm. Finally, a comparison is also made in a practical engineering application, namely the inverse aerofoil shape design.

Common Criteria related security design patterns--validation on the intelligent sensor example designed for mine environment.

PubMed

Bialas, Andrzej

2010-01-01

The paper discusses the security issues of intelligent sensors that are able to measure and process data and communicate with other information technology (IT) devices or systems. Such sensors are often used in high risk applications. To improve their robustness, the sensor systems should be developed in a restricted way to provide them with assurance. One of assurance creation methodologies is Common Criteria (ISO/IEC 15408), used for IT products and systems. The contribution of the paper is a Common Criteria compliant and pattern-based method for the intelligent sensors security development. The paper concisely presents this method and its evaluation for the sensor detecting methane in a mine, focusing on the security problem of the intelligent sensor definition and solution. The aim of the validation is to evaluate and improve the introduced method.

An Exploratory Study of Skin Problems Experienced by UK Nursing Home Residents Using Different Pad Designs.

PubMed

Clarke-OʼNeill, Sinead; Farbrot, Anne; Lagerstedt, Marie-Louise; Cottenden, Alan; Fader, Mandy

2015-01-01

The primary aim of this study was to determine whether the severity of incontinence-associated dermatitis (IAD) among nursing home-based incontinence pad users varies between pad designs. A second aim was to examine the utility of a simple method for reporting skin health problems in which healthcare assistants were asked to record basic observational data at each pad change. Randomized, multiple crossover, observational, exploratory. Twenty-one men and 57 women using absorbent continence products to contain urinary and/or fecal incontinence were recruited from 10 nursing homes in London and the south of England. A day-time variant and a night-time variant of each of the 4 main disposable pad designs on the market for moderate/heavy incontinence were tested: (1) insert pads with stretch pants; (2) 1-piece all-in-one diapers; (3) pull-up pants; and (4) belted/T-shape diapers. All pad variants for day-time use had an absorption capacity of 1900 mL ± 20% (measured using ISO 11948-1 International Standards Organization) while the capacity of night-time variants was 2400 mL ± 20%. Each resident used each of the 4 pad designs (day-time and night-time variants) for 2 weeks and the order of testing was randomized by nursing home. Skin health data were collected using 2 methods in parallel. Method 1 comprised visual observation by researchers (1 observation per pad design; 4 observations in total over 8 weeks). In method 2, healthcare assistants logged observational data on skin health at every pad change for the 8 weeks. The primary outcome variable was severity of the most severe skin problem noted by the researcher for each resident, and for each pad design (method 1). Descriptive data on skin care methods used in the nursing homes were also collected using short questionnaires and researcher observation. No significant differences in the severity or incidence of skin problems were found between observations using the 4 pad designs. However, a wide range of skin conditions was recorded that made classification difficult; the skin was often marked with creases from absorbent products, temporary marks, and pink/purple discoloration. We observed few cases of the severe erythema, rashes, and vesicles that are commonly used descriptors in previous skin tools. Nevertheless, the collected data reflect an abundance of skin problems that were difficult to categorize neatly. Researcher observations (method 1) showed that nearly all the residents (96%) had at least 1 IAD skin problem recorded over the 8-week period and 64% of residents had at least 1 problem that was rated as maximum severity. Healthcare assistants logged skin problems on 6.1% of pad changes. The discrepancy between researcher and healthcare assistant data appears to be largely due to healthcare assistants sometimes discounting low-grade IAD as normal for that population. Incontinence-associated dermatitis is common among nursing home residents who use incontinence pads, and it is often severe. No evidence was found that any design of pad was more likely than any others to be associated with skin problems. The method devised to enable healthcare assistants to record basic observational data on skin health in the diaper area at each pad change (Method 2) proved simple to use but still resulted in substantial underreporting of IAD, suggesting that further work is needed to develop a tool that more successfully encourages them to log and treat IAD problems.

Robust Tensioned Kevlar Suspension Design

NASA Technical Reports Server (NTRS)

Young, Joseph B.; Naylor, Bret J.; Holmes, Warren A.

2012-01-01

One common but challenging problem in cryogenic engineering is to produce a mount that has excellent thermal isolation but is also rigid. Such mounts can be achieved by suspending the load from a network of fibers or strings held in tension. Kevlar fibers are often used for this purpose owing to their high strength and low thermal conductivity. A suite of compact design elements has been developed to improve the reliability of suspension systems made of Kevlar.

Connecting Biology and Organic Chemistry Introductory Laboratory Courses through a Collaborative Research Project

ERIC Educational Resources Information Center

Boltax, Ariana L.; Armanious, Stephanie; Kosinski-Collins, Melissa S.; Pontrello, Jason K.

2015-01-01

Modern research often requires collaboration of experts in fields, such as math, chemistry, biology, physics, and computer science to develop unique solutions to common problems. Traditional introductory undergraduate laboratory curricula in the sciences often do not emphasize connections possible between the various disciplines. We designed an…

Communicating with the Elderly: Shattering Stereotypes.

ERIC Educational Resources Information Center

Freimuth, Vicki S.; Jamieson, Kathleen

Designed to present communications problems faced by the elderly and to assist classroom teachers to develop activities for dealing with them, this booklet begins by examining stereotypes of older persons which minimize and distort communication with them. It outlines common misconceptions about the elderly, centering on their state of mind,…

A Comparison of Missing-Data Procedures for Arima Time-Series Analysis

ERIC Educational Resources Information Center

Velicer, Wayne F.; Colby, Suzanne M.

2005-01-01

Missing data are a common practical problem for longitudinal designs. Time-series analysis is a longitudinal method that involves a large number of observations on a single unit. Four different missing-data methods (deletion, mean substitution, mean of adjacent observations, and maximum likelihood estimation) were evaluated. Computer-generated…

28 CFR 31.303 - Substantive requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... problem to allocate formula grant funds to programs designed for serious and violent juvenile offenders at... juvenile delinquents placed in a jail or a lockup for up to six hours from the time they enter a secure... time-phasing of common use nonresidential areas; and (2) Separate juvenile and adult programs...

28 CFR 31.303 - Substantive requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... problem to allocate formula grant funds to programs designed for serious and violent juvenile offenders at... juvenile delinquents placed in a jail or a lockup for up to six hours from the time they enter a secure... time-phasing of common use nonresidential areas; and (2) Separate juvenile and adult programs...

28 CFR 31.303 - Substantive requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... problem to allocate formula grant funds to programs designed for serious and violent juvenile offenders at... juvenile delinquents placed in a jail or a lockup for up to six hours from the time they enter a secure... time-phasing of common use nonresidential areas; and (2) Separate juvenile and adult programs...

Office Safety (Part II).

ERIC Educational Resources Information Center

Swartz, Carl

Toxic chemicals, noise, inadequate lighting, poor equipment design, smoking, and accidents pose serious health hazards for millions of office workers. Stress and boredom also contribute to the problems of safety. Workers should be on guard in the office for hazards, many of which are recognizable through common sense and patience. Workers must…

Handicapped Students and the SAT.

ERIC Educational Resources Information Center

Ragosta, Marjorie

A pilot study of handicapped students and the Scholastic Aptitude Test (SAT) was designed to assess the concerns of handicapped students about the SAT, to identify problems specific to certain disabilities or common across disabilities, to alert the College Board and Educational Testing Service (ETS) about the findings, and to make recommendations…

New Designs for Correctional Education and Training Programs.

ERIC Educational Resources Information Center

McCollum, Sylvia G.

1973-01-01

The challenge confronting creative educators concerned with using the correctional experience in positive ways is to structure an educational delivery system which takes into account the wide range of individual differences among people whose only common denominator is "serving time." Inherent is the problem of staff and public resistance to…

Students' Reading Images in Kinematics: The Case of Real-Time Graphs.

ERIC Educational Resources Information Center

Testa, Italo; Monroy, Gabriella; Sassi, Elena

2002-01-01

Describes a study in which secondary school students were called upon to read and interpret documents containing images of real-time kinematics graphs specially designed to address common learning problems and minimize iconic difficulties. Makes suggestions regarding the acquisition of some specific capabilities that are needed to avoid…

Cost Analysis for Educational Program Evaluation.

ERIC Educational Resources Information Center

Haller, Emil J.

Concerned with the problem of determining program costs as part of the evaluation process, this article helps the practitioner arrive at useful conceptions of the term "cost" and procedures for assessing the costs of an educational program. Its purpose is to help design costing procedures for evaluation situations that are commonly encountered. An…

Cooper Screening of Information Processing (C-SIP). Administrator's Manual.

ERIC Educational Resources Information Center

Cooper, Richard

This document is designed to assist individuals administering the Cooper Screening of Information Processing (C-SIP), which is intended as a diagnostic teaching tool that allows teachers or others to determine, in a conversational setting, whether a person manifests any common characteristics of learning problems. After a brief introduction, a…

Understanding Atmospheric Carbon Budgets: Teaching Students Conservation of Mass

ERIC Educational Resources Information Center

Reichert, Collin; Cervato, Cinzia; Niederhauser, Dale; Larsen, Michael D.

2015-01-01

In this paper we describe student use of a series of connected online problem-solving activities to remediate atmospheric carbon budget misconceptions held by undergraduate university students. In particular, activities were designed to address a common misconception about conservation of mass when students assume a simplistic, direct relationship…

Statistical Significance Testing in Second Language Research: Basic Problems and Suggestions for Reform

ERIC Educational Resources Information Center

Norris, John M.

2015-01-01

Traditions of statistical significance testing in second language (L2) quantitative research are strongly entrenched in how researchers design studies, select analyses, and interpret results. However, statistical significance tests using "p" values are commonly misinterpreted by researchers, reviewers, readers, and others, leading to…

Design and Effects of a Concept Focused Discussion Environment in E-Learning

ERIC Educational Resources Information Center

Yilmaz, Erdi Okan; Yurdugul, Halil

2016-01-01

Problem Statement: Within the frame of learning management systems, this study develops a concept focused discussion environment and validates the effectiveness of this environment's use through an experimental study. Purpose of the Study: Online discussion forums, which are commonly used in learning management systems (LMS), can negatively…

Business Mathematics Syllabus.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Secondary Curriculum Development.

The course is designed to build the knowledge and skills necessary to solve a variety of arithmetic problems that are commonly found in business situations, specifically for occupationally oriented students who have the ultimate objective of gainful employment in offices or stores, or who are preparing for careers in fields such as agriculture,…

Deconvolution of noisy transient signals: a Kalman filtering application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Candy, J.V.; Zicker, J.E.

The deconvolution of transient signals from noisy measurements is a common problem occuring in various tests at Lawrence Livermore National Laboratory. The transient deconvolution problem places atypical constraints on algorithms presently available. The Schmidt-Kalman filter, a time-varying, tunable predictor, is designed using a piecewise constant model of the transient input signal. A simulation is developed to test the algorithm for various input signal bandwidths and different signal-to-noise ratios for the input and output sequences. The algorithm performance is reasonable.

Research in advanced formal theorem-proving techniques

NASA Technical Reports Server (NTRS)

Rulifson, J. F.

1971-01-01

The present status is summarized of a continuing research program aimed at the design and implementation of a language for expressing problem-solving procedures in several areas of artificial intelligence, including program synthesis, robot planning, and theorem proving. Notations, concepts, and procedures common to the representation and solution of many of these problems were abstracted and incorporated as features into the language. The areas of research covered are described, and abstracts of six papers that contain extensive description and technical detail of the work are presented.

Statistical challenges in a regulatory review of cardiovascular and CNS clinical trials.

PubMed

Hung, H M James; Wang, Sue-Jane; Yang, Peiling; Jin, Kun; Lawrence, John; Kordzakhia, George; Massie, Tristan

2016-01-01

There are several challenging statistical problems identified in the regulatory review of large cardiovascular (CV) clinical outcome trials and central nervous system (CNS) trials. The problems can be common or distinct due to disease characteristics and the differences in trial design elements such as endpoints, trial duration, and trial size. In schizophrenia trials, heavy missing data is a big problem. In Alzheimer trials, the endpoints for assessing symptoms and the endpoints for assessing disease progression are essentially the same; it is difficult to construct a good trial design to evaluate a test drug for its ability to slow the disease progression. In CV trials, reliance on a composite endpoint with low event rate makes the trial size so large that it is infeasible to study multiple doses necessary to find the right dose for study patients. These are just a few typical problems. In the past decade, adaptive designs were increasingly used in these disease areas and some challenges occur with respect to that use. Based on our review experiences, group sequential designs (GSDs) have borne many successful stories in CV trials and are also increasingly used for developing treatments targeting CNS diseases. There is also a growing trend of using more advanced unblinded adaptive designs for producing efficacy evidence. Many statistical challenges with these kinds of adaptive designs have been identified through our experiences with the review of regulatory applications and are shared in this article.

Wireless device connection problems and design solutions

NASA Astrophysics Data System (ADS)

Song, Ji-Won; Norman, Donald; Nam, Tek-Jin; Qin, Shengfeng

2016-09-01

Users, especially the non-expert users, commonly experience problems when connecting multiple devices with interoperability. While studies on multiple device connections are mostly concentrated on spontaneous device association techniques with a focus on security aspects, the research on user interaction for device connection is still limited. More research into understanding people is needed for designers to devise usable techniques. This research applies the Research-through-Design method and studies the non-expert users' interactions in establishing wireless connections between devices. The "Learning from Examples" concept is adopted to develop a study focus line by learning from the expert users' interaction with devices. This focus line is then used for guiding researchers to explore the non-expert users' difficulties at each stage of the focus line. Finally, the Research-through-Design approach is used to understand the users' difficulties, gain insights to design problems and suggest usable solutions. When connecting a device, the user is required to manage not only the device's functionality but also the interaction between devices. Based on learning from failures, an important insight is found that the existing design approach to improve single-device interaction issues, such as improvements to graphical user interfaces or computer guidance, cannot help users to handle problems between multiple devices. This study finally proposes a desirable user-device interaction in which images of two devices function together with a system image to provide the user with feedback on the status of the connection, which allows them to infer any required actions.

Design of an airborne lidar for stratospheric aerosol measurements

NASA Technical Reports Server (NTRS)

Evans, W. E.

1977-01-01

A modular, multiple-telescope receiving concept is developed to gain a relatively large receiver collection aperture without requiring extensive modifications to the aircraft. This concept, together with the choice of a specific photodetector, signal processing, and data recording system capable of maintaining approximately 1% precision over the required large signal amplitude range, is found to be common to all of the options. It is recommended that development of the lidar begin by more detailed definition of solutions to these important common signal detection and recording problems.

Research Methods in Healthcare Epidemiology and Antimicrobial Stewardship-Quasi-Experimental Designs.

PubMed

Schweizer, Marin L; Braun, Barbara I; Milstone, Aaron M

2016-10-01

Quasi-experimental studies evaluate the association between an intervention and an outcome using experiments in which the intervention is not randomly assigned. Quasi-experimental studies are often used to evaluate rapid responses to outbreaks or other patient safety problems requiring prompt, nonrandomized interventions. Quasi-experimental studies can be categorized into 3 major types: interrupted time-series designs, designs with control groups, and designs without control groups. This methods paper highlights key considerations for quasi-experimental studies in healthcare epidemiology and antimicrobial stewardship, including study design and analytic approaches to avoid selection bias and other common pitfalls of quasi-experimental studies. Infect Control Hosp Epidemiol 2016;1-6.

Research Methods in Healthcare Epidemiology and Antimicrobial Stewardship – Quasi-Experimental Designs

PubMed Central

Schweizer, Marin L.; Braun, Barbara I.; Milstone, Aaron M.

2016-01-01

Quasi-experimental studies evaluate the association between an intervention and an outcome using experiments in which the intervention is not randomly assigned. Quasi-experimental studies are often used to evaluate rapid responses to outbreaks or other patient safety problems requiring prompt non-randomized interventions. Quasi-experimental studies can be categorized into three major types: interrupted time series designs, designs with control groups, and designs without control groups. This methods paper highlights key considerations for quasi-experimental studies in healthcare epidemiology and antimicrobial stewardship including study design and analytic approaches to avoid selection bias and other common pitfalls of quasi-experimental studies. PMID:27267457

Aircraft family design using enhanced collaborative optimization

NASA Astrophysics Data System (ADS)

Roth, Brian Douglas

Significant progress has been made toward the development of multidisciplinary design optimization (MDO) methods that are well-suited to practical large-scale design problems. However, opportunities exist for further progress. This thesis describes the development of enhanced collaborative optimization (ECO), a new decomposition-based MDO method. To support the development effort, the thesis offers a detailed comparison of two existing MDO methods: collaborative optimization (CO) and analytical target cascading (ATC). This aids in clarifying their function and capabilities, and it provides inspiration for the development of ECO. The ECO method offers several significant contributions. First, it enhances communication between disciplinary design teams while retaining the low-order coupling between them. Second, it provides disciplinary design teams with more authority over the design process. Third, it resolves several troubling computational inefficiencies that are associated with CO. As a result, ECO provides significant computational savings (relative to CO) for the test cases and practical design problems described in this thesis. New aircraft development projects seldom focus on a single set of mission requirements. Rather, a family of aircraft is designed, with each family member tailored to a different set of requirements. This thesis illustrates the application of decomposition-based MDO methods to aircraft family design. This represents a new application area, since MDO methods have traditionally been applied to multidisciplinary problems. ECO offers aircraft family design the same benefits that it affords to multidisciplinary design problems. Namely, it simplifies analysis integration, it provides a means to manage problem complexity, and it enables concurrent design of all family members. In support of aircraft family design, this thesis introduces a new wing structural model with sufficient fidelity to capture the tradeoffs associated with component commonality, but of appropriate fidelity for aircraft conceptual design. The thesis also introduces a new aircraft family concept. Unlike most families, the intent is not necessarily to produce all family members. Rather, the family includes members for immediate production and members that address potential future market conditions and/or environmental regulations. The result is a set of designs that yield a small performance penalty today in return for significant future flexibility to produce family members that respond to new market conditions and environmental regulations.

On position/force tracking control problem of cooperative robot manipulators using adaptive fuzzy backstepping approach.

PubMed

Baigzadehnoe, Barmak; Rahmani, Zahra; Khosravi, Alireza; Rezaie, Behrooz

2017-09-01

In this paper, the position and force tracking control problem of cooperative robot manipulator system handling a common rigid object with unknown dynamical models and unknown external disturbances is investigated. The universal approximation properties of fuzzy logic systems are employed to estimate the unknown system dynamics. On the other hand, by defining new state variables based on the integral and differential of position and orientation errors of the grasped object, the error system of coordinated robot manipulators is constructed. Subsequently by defining the appropriate change of coordinates and using the backstepping design strategy, an adaptive fuzzy backstepping position tracking control scheme is proposed for multi-robot manipulator systems. By utilizing the properties of internal forces, extra terms are also added to the control signals to consider the force tracking problem. Moreover, it is shown that the proposed adaptive fuzzy backstepping position/force control approach ensures all the signals of the closed loop system uniformly ultimately bounded and tracking errors of both positions and forces can converge to small desired values by proper selection of the design parameters. Finally, the theoretic achievements are tested on the two three-link planar robot manipulators cooperatively handling a common object to illustrate the effectiveness of the proposed approach. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Optimal structural design of the midship of a VLCC based on the strategy integrating SVM and GA

NASA Astrophysics Data System (ADS)

Sun, Li; Wang, Deyu

2012-03-01

In this paper a hybrid process of modeling and optimization, which integrates a support vector machine (SVM) and genetic algorithm (GA), was introduced to reduce the high time cost in structural optimization of ships. SVM, which is rooted in statistical learning theory and an approximate implementation of the method of structural risk minimization, can provide a good generalization performance in metamodeling the input-output relationship of real problems and consequently cuts down on high time cost in the analysis of real problems, such as FEM analysis. The GA, as a powerful optimization technique, possesses remarkable advantages for the problems that can hardly be optimized with common gradient-based optimization methods, which makes it suitable for optimizing models built by SVM. Based on the SVM-GA strategy, optimization of structural scantlings in the midship of a very large crude carrier (VLCC) ship was carried out according to the direct strength assessment method in common structural rules (CSR), which eventually demonstrates the high efficiency of SVM-GA in optimizing the ship structural scantlings under heavy computational complexity. The time cost of this optimization with SVM-GA has been sharply reduced, many more loops have been processed within a small amount of time and the design has been improved remarkably.

A Genetic Algorithm for the Bi-Level Topological Design of Local Area Networks

PubMed Central

Camacho-Vallejo, José-Fernando; Mar-Ortiz, Julio; López-Ramos, Francisco; Rodríguez, Ricardo Pedraza

2015-01-01

Local access networks (LAN) are commonly used as communication infrastructures which meet the demand of a set of users in the local environment. Usually these networks consist of several LAN segments connected by bridges. The topological LAN design bi-level problem consists on assigning users to clusters and the union of clusters by bridges in order to obtain a minimum response time network with minimum connection cost. Therefore, the decision of optimally assigning users to clusters will be made by the leader and the follower will make the decision of connecting all the clusters while forming a spanning tree. In this paper, we propose a genetic algorithm for solving the bi-level topological design of a Local Access Network. Our solution method considers the Stackelberg equilibrium to solve the bi-level problem. The Stackelberg-Genetic algorithm procedure deals with the fact that the follower’s problem cannot be optimally solved in a straightforward manner. The computational results obtained from two different sets of instances show that the performance of the developed algorithm is efficient and that it is more suitable for solving the bi-level problem than a previous Nash-Genetic approach. PMID:26102502

Analysis of Student Service-Learning Reflections for the Assessment of Transferable-Skills Development

NASA Astrophysics Data System (ADS)

Rizzo, D. M.; Dewoolkar, M.; Hayden, N.; Oka, L.; Pearce, A. R.

2010-12-01

The civil and environmental engineering (CEE) programs at the University of Vermont (UVM) incorporate systems thinking and a systems approach to sustainable engineering problem solving. A systems approach considers long-term social, environmental and economic factors within the context of the engineering problem solution and encompasses sustainable engineering solutions. Our goal is to prepare students to become leaders in their chosen field who can anticipate co-products associated with forecasted solutions. As a way of practicing the systems approach, we include service-learning projects in many of our undergraduate engineering courses, culminating with the senior capstone design course. We use a variety of formative and summative assessment methods to gage student understanding and attitudes including student surveys, focus groups, assessment of student projects, and student reflections. Student reflections from two courses -Modeling Environmental and Transportation Systems (31 juniors) and Senior Design Project (30 seniors) are compared. Of these, 25 students were common to both courses. The focus of the systems modeling service-learning project involved mentoring home-schooled children (11-14 yrs old) to solve problems of mobility, using the fun and inspiration of biomimicry. Students were required to invent innovative methods to move people or goods that improve associated constraints (i.e., minimize congestion, reduce pollution, increase safety), or reduce the need for transportation altogether. The capstone design project required a comprehensive engineering design involving two or more CEE sub-disciplines. Both service-learning projects were intended to enhance students’ academic learning experience, attain civic engagement and reinforce transferable skills (written and oral communication, teamwork, leadership and mentoring skills). The student course reflections were not guided; yet they provided valuable data to assess commonalities and differences in student attitudes toward their service-learning projects, specifically, the development of transferable skills. In the spirit of service-learning pedagogy, we divide the contents of students’ written reflections into three categories - academic enhancement, civic engagement and personal growth skills. The commonalities focused mostly on civic engagement. Differences are observed primarily in academic enhancement and personal growth categories. Students working on the biomimicry design project reflected on personal growth (e.g. leadership skills, mentoring, creativity, organizational skills, communication to nontechnical audience), but did not credit it with academic enhancement. In contrast, the senior design reflections concentrated on academics, specifically, students appreciated the enhancement of technical skills as a part of their engineering experience.

Pilot randomised controlled trial of the ENGAGER collaborative care intervention for prisoners with common mental health problems, near to and after release.

PubMed

Lennox, Charlotte; Kirkpatrick, Tim; Taylor, Rod S; Todd, Roxanne; Greenwood, Clare; Haddad, Mark; Stevenson, Caroline; Stewart, Amy; Shenton, Deborah; Carroll, Lauren; Brand, Sarah L; Quinn, Cath; Anderson, Rob; Maguire, Mike; Harris, Tirril; Shaw, Jennifer; Byng, Richard

2018-01-01

Rates of common mental health problems are much higher in prison populations, but access to primary care mental health support falls short of community equivalence. Discontinuity of care on release is the norm and is further complicated by substance use and a range of social problems, e.g. homelessness. To address these problems, we worked with criminal justice, third sector social inclusion services, health services and people with lived experiences (peer researchers), to develop a complex collaborative care intervention aimed at supporting men with common mental health problems near to and following release from prison. This paper describes an external pilot trial to test the feasibility of a full randomised controlled trial. Eligible individuals with 4 to 16 weeks left to serve were screened to assess for common mental health problems. Participants were then randomised at a ratio of 2:1 allocation to ENGAGER plus standard care (intervention) or standard care alone (treatment as usual). Participants were followed up at 1 and 3 months' post release. Success criteria for this pilot trial were to meet the recruitment target sample size of 60 participants, to follow up at least 50% of participants at 3 months' post release from prison, and to deliver the ENGAGER intervention. Estimates of recruitment and retention rates and 95% confidence intervals (CIs) are reported. Descriptive analyses included summaries (percentages or means) for participant demographics, and baseline characteristics are reported. Recruitment target was met with 60 participants randomised in 9 months. The average retention rates were 73% at 1 month [95% CI 61 to 83] and 47% at 3 months follow-up [95% CI 35 to 59]. Ninety percent of participants allocated to the intervention successfully engaged with a practitioner before release and 70% engaged following release. This pilot confirms the feasibility of conducting a randomised trial for prison leavers with common mental health problems. Based on this pilot study and some minor changes to the trial design and intervention, a full two-centre randomised trial assessing the clinical and cost-effectiveness of the ENGAGER intervention is currently underway.

Studying PubMed usages in the field for complex problem solving: Implications for tool design

PubMed Central

Song, Jean; Tonks, Jennifer Steiner; Meng, Fan; Xuan, Weijian; Ameziane, Rafiqa

2012-01-01

Many recent studies on MEDLINE-based information seeking have shed light on scientists’ behaviors and associated tool innovations that may improve efficiency and effectiveness. Few if any studies, however, examine scientists’ problem-solving uses of PubMed in actual contexts of work and corresponding needs for better tool support. Addressing this gap, we conducted a field study of novice scientists (14 upper level undergraduate majors in molecular biology) as they engaged in a problem solving activity with PubMed in a laboratory setting. Findings reveal many common stages and patterns of information seeking across users as well as variations, especially variations in cognitive search styles. Based on findings, we suggest tool improvements that both confirm and qualify many results found in other recent studies. Our findings highlight the need to use results from context-rich studies to inform decisions in tool design about when to offer improved features to users. PMID:24376375

Adaptive Fuzzy Output Feedback Control for Switched Nonlinear Systems With Unmodeled Dynamics.

PubMed

Tong, Shaocheng; Li, Yongming

2017-02-01

This paper investigates a robust adaptive fuzzy control stabilization problem for a class of uncertain nonlinear systems with arbitrary switching signals that use an observer-based output feedback scheme. The considered switched nonlinear systems possess the unstructured uncertainties, unmodeled dynamics, and without requiring the states being available for measurement. A state observer which is independent of switching signals is designed to solve the problem of unmeasured states. Fuzzy logic systems are used to identify unknown lumped nonlinear functions so that the problem of unstructured uncertainties can be solved. By combining adaptive backstepping design principle and small-gain approach, a novel robust adaptive fuzzy output feedback stabilization control approach is developed. The stability of the closed-loop system is proved via the common Lyapunov function theory and small-gain theorem. Finally, the simulation results are given to demonstrate the validity and performance of the proposed control strategy.

Multidisciplinary Optimization Branch Experience Using iSIGHT Software

NASA Technical Reports Server (NTRS)

Padula, S. L.; Korte, J. J.; Dunn, H. J.; Salas, A. O.

1999-01-01

The Multidisciplinary Optimization (MDO) Branch at NASA Langley Research Center is investigating frameworks for supporting multidisciplinary analysis and optimization research. An optimization framework call improve the design process while reducing time and costs. A framework provides software and system services to integrate computational tasks and allows the researcher to concentrate more on the application and less on the programming details. A framework also provides a common working environment and a full range of optimization tools, and so increases the productivity of multidisciplinary research teams. Finally, a framework enables staff members to develop applications for use by disciplinary experts in other organizations. Since the release of version 4.0, the MDO Branch has gained experience with the iSIGHT framework developed by Engineous Software, Inc. This paper describes experiences with four aerospace applications: (1) reusable launch vehicle sizing, (2) aerospike nozzle design, (3) low-noise rotorcraft trajectories, and (4) acoustic liner design. All applications have been successfully tested using the iSIGHT framework, except for the aerospike nozzle problem, which is in progress. Brief overviews of each problem are provided. The problem descriptions include the number and type of disciplinary codes, as well as all estimate of the multidisciplinary analysis execution time. In addition, the optimization methods, objective functions, design variables, and design constraints are described for each problem. Discussions on the experience gained and lessons learned are provided for each problem. These discussions include the advantages and disadvantages of using the iSIGHT framework for each case as well as the ease of use of various advanced features. Potential areas of improvement are identified.

Applying AN Object-Oriented Database Model to a Scientific Database Problem: Managing Experimental Data at Cebaf.

NASA Astrophysics Data System (ADS)

Ehlmann, Bryon K.

Current scientific experiments are often characterized by massive amounts of very complex data and the need for complex data analysis software. Object-oriented database (OODB) systems have the potential of improving the description of the structure and semantics of this data and of integrating the analysis software with the data. This dissertation results from research to enhance OODB functionality and methodology to support scientific databases (SDBs) and, more specifically, to support a nuclear physics experiments database for the Continuous Electron Beam Accelerator Facility (CEBAF). This research to date has identified a number of problems related to the practical application of OODB technology to the conceptual design of the CEBAF experiments database and other SDBs: the lack of a generally accepted OODB design methodology, the lack of a standard OODB model, the lack of a clear conceptual level in existing OODB models, and the limited support in existing OODB systems for many common object relationships inherent in SDBs. To address these problems, the dissertation describes an Object-Relationship Diagram (ORD) and an Object-oriented Database Definition Language (ODDL) that provide tools that allow SDB design and development to proceed systematically and independently of existing OODB systems. These tools define multi-level, conceptual data models for SDB design, which incorporate a simple notation for describing common types of relationships that occur in SDBs. ODDL allows these relationships and other desirable SDB capabilities to be supported by an extended OODB system. A conceptual model of the CEBAF experiments database is presented in terms of ORDs and the ODDL to demonstrate their functionality and use and provide a foundation for future development of experimental nuclear physics software using an OODB approach.

Psychology of developing and designing expert systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tonn, B.; MacGregor, D.

This paper discusses psychological problems relevant to developing and designing expert systems. With respect to the former, the psychological literature suggests that several cognitive biases may affect the elicitation of a valid knowledge base from the expert. The literature also suggests that common expert system inference engines may be quite inconsistent with reasoning heuristics employed by experts. With respect to expert system user interfaces, care should be taken when eliciting uncertainty estimates from users, presenting system conclusions, and ordering questions.

Modeling and simulation of different and representative engineering problems using Network Simulation Method

PubMed Central

2018-01-01

Mathematical models simulating different and representative engineering problem, atomic dry friction, the moving front problems and elastic and solid mechanics are presented in the form of a set of non-linear, coupled or not coupled differential equations. For different parameters values that influence the solution, the problem is numerically solved by the network method, which provides all the variables of the problems. Although the model is extremely sensitive to the above parameters, no assumptions are considered as regards the linearization of the variables. The design of the models, which are run on standard electrical circuit simulation software, is explained in detail. The network model results are compared with common numerical methods or experimental data, published in the scientific literature, to show the reliability of the model. PMID:29518121

Modeling and simulation of different and representative engineering problems using Network Simulation Method.

PubMed

Sánchez-Pérez, J F; Marín, F; Morales, J L; Cánovas, M; Alhama, F

2018-01-01

Mathematical models simulating different and representative engineering problem, atomic dry friction, the moving front problems and elastic and solid mechanics are presented in the form of a set of non-linear, coupled or not coupled differential equations. For different parameters values that influence the solution, the problem is numerically solved by the network method, which provides all the variables of the problems. Although the model is extremely sensitive to the above parameters, no assumptions are considered as regards the linearization of the variables. The design of the models, which are run on standard electrical circuit simulation software, is explained in detail. The network model results are compared with common numerical methods or experimental data, published in the scientific literature, to show the reliability of the model.

Common Criteria Related Security Design Patterns—Validation on the Intelligent Sensor Example Designed for Mine Environment

PubMed Central

Bialas, Andrzej

2010-01-01

The paper discusses the security issues of intelligent sensors that are able to measure and process data and communicate with other information technology (IT) devices or systems. Such sensors are often used in high risk applications. To improve their robustness, the sensor systems should be developed in a restricted way to provide them with assurance. One of assurance creation methodologies is Common Criteria (ISO/IEC 15408), used for IT products and systems. The contribution of the paper is a Common Criteria compliant and pattern-based method for the intelligent sensors security development. The paper concisely presents this method and its evaluation for the sensor detecting methane in a mine, focusing on the security problem of the intelligent sensor definition and solution. The aim of the validation is to evaluate and improve the introduced method. PMID:22399888

The Impact of Integrated Coaching and Collaboration within an Inquiry Learning Environment

ERIC Educational Resources Information Center

Dragon, Toby

2013-01-01

This thesis explores the design and evaluation of a collaborative, inquiry learning Intelligent Tutoring System for ill-defined problem spaces. The common ground in the fields of Artificial Intelligence in Education and Computer-Supported Collaborative Learning is investigated to identify ways in which tutoring systems can employ both automated…

Social Software: Participants' Experience Using Social Networking for Learning

ERIC Educational Resources Information Center

Batchelder, Cecil W.

2010-01-01

Social networking tools used in learning provides instructional design with tools for transformative change in education. This study focused on defining the meanings and essences of social networking through the lived common experiences of 7 college students. The problem of the study was a lack of learner voice in understanding the value of social…

Take a Technowalk: To Learn about Materials & Structures. Springboards for Teaching Series. Teaching Innovations.

ERIC Educational Resources Information Center

Williams, Peter; Jacobson, Saryl

A Technowalk is a walk through the community to explore the technology found there, looking for common materials or particular kinds of structures. Technowalks involve the investigating, designing, testing, trouble-shooting, and problem-solving that the technological process provides. This book provides suggestions for 10 Technowalk activities for…

Assessing the Impact of Planned Social Change

ERIC Educational Resources Information Center

Campbell, Donald T.

2011-01-01

It is a special characteristic of all modern societies that people consciously decide on and plan projects designed to improve their social systems. It is their universal predicament that their projects do not always have their intended effects. It seems inevitable that in most countries this common set of problems, combined with the obvious…

Motor Deficits Following Pediatric Mild Traumatic Brain Injury: Implications for School Psychologists

ERIC Educational Resources Information Center

Davis, Andrew S.; Moore, Brittney; Rice, Valerie; Decker, Scott

2015-01-01

Mild traumatic brain injury (mTBI), sometimes referred to as concussion, is one of the most common acquired neurological problems of childhood. When children return to school following mTBI, school psychologists should be actively involved in the determination of neurocognitive and functional deficits for the purpose of designing strength-based…

Quantifying Aluminum Crystal Size Part 2: The Model-Development Sequence

ERIC Educational Resources Information Center

Hjalmarson, Margret; Diefes-Dux, Heidi A.; Bowman, Keith; Zawojewski, Judith S.

2006-01-01

We have designed model-development sequences using a common context to provide authentic problem-solving experiences for first-year students. The model-development sequence takes a model-eliciting activity a step further by engaging students in the exploration and adaptation of a mathematical model (e.g., procedure, algorithm, method) for solving…

Educational Policies in a Comparative Perspective: Suggestions for a Research Agenda. IIEP Contributions, No. 6.

ERIC Educational Resources Information Center

Hallak, Jacques

Over recent decades, comparative analyses of educational problems or policies have become more common. This paper, which focuses on Western European countries, argues that comparative studies that are carefully designed, conducted, and used are essential for the improvement of educational policy and decision making. Comparative analyses are…

Intelligent Tutoring Systems: Formalization as Automata and Interface Design Using Neural Networks

ERIC Educational Resources Information Center

Curilem, S. Gloria; Barbosa, Andrea R.; de Azevedo, Fernando M.

2007-01-01

This article proposes a mathematical model of Intelligent Tutoring Systems (ITS), based on observations of the behaviour of these systems. One of the most important problems of pedagogical software is to establish a common language between the knowledge areas involved in their development, basically pedagogical, computing and domain areas. A…

Rational Ignorance in Education: A Field Experiment in Student Plagiarism

ERIC Educational Resources Information Center

Dee, Thomas S.; Jacob, Brian A.

2012-01-01

Plagiarism appears to be a common problem among college students, yet there is little evidence on the effectiveness of interventions designed to minimize plagiarism. This study presents the results of a field experiment that evaluated the effects of a web-based educational tutorial in reducing plagiarism. We found that assignment to the treatment…

An Arduino-Based Experiment Designed to Clarify the Transition to Total Internal Reflection

ERIC Educational Resources Information Center

Atkin, Keith

2018-01-01

The topic of refraction and reflection of light at the boundary of transparent media is a fundamentally important one. The special case of total internal reflection is however commonly misrepresented in elementary textbooks. This paper addresses the problem and describes an experimental procedure for measuring and displaying reflected and…

Teaching Case: Adapting the Access Northwind Database to Support a Database Course

ERIC Educational Resources Information Center

Dyer, John N.; Rogers, Camille

2015-01-01

A common problem encountered when teaching database courses is that few large illustrative databases exist to support teaching and learning. Most database textbooks have small "toy" databases that are chapter objective specific, and thus do not support application over the complete domain of design, implementation and management concepts…

Designing a VOIP Based Language Test

ERIC Educational Resources Information Center

Garcia Laborda, Jesus; Magal Royo, Teresa; Otero de Juan, Nuria; Gimenez Lopez, Jose L.

2015-01-01

Assessing speaking is one of the most difficult tasks in computer based language testing. Many countries all over the world face the need to implement standardized language tests where speaking tasks are commonly included. However, a number of problems make them rather impractical such as the costs, the personnel involved, the length of time for…

Self-Awareness and Personal Growth: Theory and Application of Bloom's Taxonomy

ERIC Educational Resources Information Center

Ugur, Hasan; Constantinescu, Petru-Madalin; Stevens, Michael J.

2015-01-01

Problem Statement: In this article, we summarize a group-based, self-development curriculum based on humanistic principles, framed by contemporary self-determination theory (SDT), and designed in accordance with Bloom's Taxonomy. The processes of awareness and integration are common to SDT and Bloom's Taxonomy, and to our knowledge, have not been…

Speech Development of Autistic Children by Interactive Computer Games

ERIC Educational Resources Information Center

Rahman, Mustafizur; Ferdous, S. M.; Ahmed, Syed Ishtiaque; Anwar, Anika

2011-01-01

Purpose: Speech disorder is one of the most common problems found with autistic children. The purpose of this paper is to investigate the introduction of computer-based interactive games along with the traditional therapies in order to help improve the speech of autistic children. Design/methodology/approach: From analysis of the works of Ivar…

Reducing stand densities in immature and mature stands, Applegate Watershed, Southwest Oregon.

Treesearch

Marty L. Main; Michael P. Amaranthus

1996-01-01

Abstract Throughout the Applegate watershed, dense, overstocked, immature stands of mixed conifers and hardwoods and declining stands of mature conifers present significant and complex silvicultural problems. Stand stagnation is common, as is loss of large-diameter conifers from insects and wildfire. Treatments designed to maintain or encourage development of large-...

Function-Based Approach to Designing an Instructional Environment

ERIC Educational Resources Information Center

Park, Kristy; Pinkelman, Sarah

2017-01-01

Teachers are faced with the challenge of selecting interventions that are most likely to be effective and best matched to the function of problem behavior. This article will define aspects of the instructional environment and describe a decision-making logic to select environmental variables. A summary of commonly used function-based interventions…

Applications and development of communication models for the touchstone GAMMA and DELTA prototypes

NASA Technical Reports Server (NTRS)

Seidel, Steven R.

1993-01-01

The goal of this project was to develop models of the interconnection networks of the Intel iPSC/860 and DELTA multicomputers to guide the design of efficient algorithms for interprocessor communication in problems that commonly occur in CFD codes and other applications. Interprocessor communication costs of codes for message-passing architectures such as the iPSC/860 and DELTA significantly affect the level of performance that can be obtained from those machines. This project addressed several specific problems in the achievement of efficient communication on the Intel iPSC/860 hypercube and DELTA mesh. In particular, an efficient global processor synchronization algorithm was developed for the iPSC/860 and numerous broadcast algorithms were designed for the DELTA.

A survey of autonomous vision-based See and Avoid for Unmanned Aircraft Systems

NASA Astrophysics Data System (ADS)

Mcfadyen, Aaron; Mejias, Luis

2016-01-01

This paper provides a comprehensive review of the vision-based See and Avoid problem for unmanned aircraft. The unique problem environment and associated constraints are detailed, followed by an in-depth analysis of visual sensing limitations. In light of such detection and estimation constraints, relevant human, aircraft and robot collision avoidance concepts are then compared from a decision and control perspective. Remarks on system evaluation and certification are also included to provide a holistic review approach. The intention of this work is to clarify common misconceptions, realistically bound feasible design expectations and offer new research directions. It is hoped that this paper will help us to unify design efforts across the aerospace and robotics communities.

Mechanical design problems associated with turbopump fluid film bearings

NASA Technical Reports Server (NTRS)

Evces, Charles R.

1990-01-01

Most high speed cryogenic turbopumps for liquid propulsion rocket engines currently use ball or roller contact bearings for rotor support. The operating speeds, loads, clearances, and environments of these pumps combine to make bearing wear a limiting factor on turbopump life. An example is the high pressure oxygen turbopump (HPOTP) used in the Space Shuttle Main Engine (SSME). Although the HPOTP design life is 27,000 seconds at 30,000 rpms, or approximately 50 missions, bearings must currently be replaced after 2 missions. One solution to the bearing wear problem in the HPOTP, as well as in future turbopump designs, is the utilization of fluid film bearings in lieu of continuous contact bearings. Hydrostatic, hydrodynamic, and damping seal bearings are all replacement candidates for contact bearings in rocket engine high speed turbomachinery. These three types of fluid film bearings have different operating characteristics, but they share a common set of mechanical design opportunities and difficulties. Results of research to define some of the mechanical design issues are given. Problems considered include transient strat/stop rub, non-operational rotor support, bearing wear inspection and measurement, and bearing fluid supply route. Emphasis is given to the HPOTP preburner pump (PBP) bearing, but the results are pertinent to high-speed cryogenic turbomachinery in general.

Test-specific control conditions for functional analyses.

PubMed

Fahmie, Tara A; Iwata, Brian A; Querim, Angie C; Harper, Jill M

2013-01-01

Most functional analyses of problem behavior include a common condition (play or noncontingent reinforcement) as a control for both positive and negative reinforcement. However, test-specific conditions that control for each potential source of reinforcement may be beneficial occasionally. We compared responding during alone, ignore, play, and differential reinforcement of other behavior (DRO) control conditions for individuals whose problem behavior was maintained by positive or negative reinforcement. Results showed that all of the conditions were effective controls for problem behavior maintained by positive reinforcement; however, the DRO condition was consistently ineffective as a control for problem behavior maintained by negative reinforcement. Implications for the design of functional analyses and future research are discussed. © Society for the Experimental Analysis of Behavior.

Algorithms for sum-of-squares-based stability analysis and control design of uncertain nonlinear systems

NASA Astrophysics Data System (ADS)

Ataei-Esfahani, Armin

In this dissertation, we present algorithmic procedures for sum-of-squares based stability analysis and control design for uncertain nonlinear systems. In particular, we consider the case of robust aircraft control design for a hypersonic aircraft model subject to parametric uncertainties in its aerodynamic coefficients. In recent years, Sum-of-Squares (SOS) method has attracted increasing interest as a new approach for stability analysis and controller design of nonlinear dynamic systems. Through the application of SOS method, one can describe a stability analysis or control design problem as a convex optimization problem, which can efficiently be solved using Semidefinite Programming (SDP) solvers. For nominal systems, the SOS method can provide a reliable and fast approach for stability analysis and control design for low-order systems defined over the space of relatively low-degree polynomials. However, The SOS method is not well-suited for control problems relating to uncertain systems, specially those with relatively high number of uncertainties or those with non-affine uncertainty structure. In order to avoid issues relating to the increased complexity of the SOS problems for uncertain system, we present an algorithm that can be used to transform an SOS problem with uncertainties into a LMI problem with uncertainties. A new Probabilistic Ellipsoid Algorithm (PEA) is given to solve the robust LMI problem, which can guarantee the feasibility of a given solution candidate with an a-priori fixed probability of violation and with a fixed confidence level. We also introduce two approaches to approximate the robust region of attraction (RROA) for uncertain nonlinear systems with non-affine dependence on uncertainties. The first approach is based on a combination of PEA and SOS method and searches for a common Lyapunov function, while the second approach is based on the generalized Polynomial Chaos (gPC) expansion theorem combined with the SOS method and searches for parameter-dependent Lyapunov functions. The control design problem is investigated through a case study of a hypersonic aircraft model with parametric uncertainties. Through time-scale decomposition and a series of function approximations, the complexity of the aircraft model is reduced to fall within the capability of SDP solvers. The control design problem is then formulated as a convex problem using the dual of the Lyapunov theorem. A nonlinear robust controller is searched using the combined PEA/SOS method. The response of the uncertain aircraft model is evaluated for two sets of pilot commands. As the simulation results show, the aircraft remains stable under up to 50% uncertainty in aerodynamic coefficients and can follow the pilot commands.

An Affordance-Based Framework for Human Computation and Human-Computer Collaboration.

PubMed

Crouser, R J; Chang, R

2012-12-01

Visual Analytics is "the science of analytical reasoning facilitated by visual interactive interfaces". The goal of this field is to develop tools and methodologies for approaching problems whose size and complexity render them intractable without the close coupling of both human and machine analysis. Researchers have explored this coupling in many venues: VAST, Vis, InfoVis, CHI, KDD, IUI, and more. While there have been myriad promising examples of human-computer collaboration, there exists no common language for comparing systems or describing the benefits afforded by designing for such collaboration. We argue that this area would benefit significantly from consensus about the design attributes that define and distinguish existing techniques. In this work, we have reviewed 1,271 papers from many of the top-ranking conferences in visual analytics, human-computer interaction, and visualization. From these, we have identified 49 papers that are representative of the study of human-computer collaborative problem-solving, and provide a thorough overview of the current state-of-the-art. Our analysis has uncovered key patterns of design hinging on human and machine-intelligence affordances, and also indicates unexplored avenues in the study of this area. The results of this analysis provide a common framework for understanding these seemingly disparate branches of inquiry, which we hope will motivate future work in the field.

Finding common ground in large carnivore conservation: mapping contending perspectives

USGS Publications Warehouse

Mattson, D.J.; Byrd, K.L.; Rutherford, M.B.; Brown, S.R.; Clark, T.W.

2006-01-01

Reducing current conflict over large carnivore conservation and designing effective strategies that enjoy broad public support depend on a better understanding of the values, beliefs, and demands of those who are involved or affected. We conducted a workshop attended by diverse participants involved in conservation of large carnivores in the northern U.S. Rocky Mountains, and used Q methodology to elucidate participant perspectives regarding "problems" and "solutions". Q methodology employs qualitative and quantitative techniques to reveal the subjectivity in any situation. We identified four general perspectives for both problems and solutions, three of which (Carnivore Advocates, Devolution Advocates, and Process Reformers) were shared by participants across domains. Agency Empathizers (problems) and Economic Pragmatists (solutions) were not clearly linked. Carnivore and Devolution Advocates expressed diametrically opposed perspectives that legitimized different sources of policy-relevant information ("science" for Carnivore Advocates and "local knowledge" for Devolution Advocates). Despite differences, we identified potential common ground focused on respectful, persuasive, and creative processes that would build understanding and tolerance. ?? 2006 Elsevier Ltd. All rights reserved.

The problem of parental nonadherence in clinical behavior analysis: effective treatment is not enough.

PubMed Central

Allen, K D; Warzak, W J

2000-01-01

Applied behavior analysts have developed many effective interventions for common childhood problems and have repeatedly demonstrated that childhood behavior responds to properly managed contingencies. The success of these interventions is dependent upon their basic effectiveness, as demonstrated in the literature, their precise delivery by the clinician to the parent, and adherence to or consistent implementation of the intervention. Unfortunately, arranging the consistent implementation of effective parenting strategies is a significant challenge for behavior analysts who work in homes, schools, and outpatient or primary care clinics. Much has been done to address issues of adherence or implementation in the clinic, but relatively little has been done to increase our understanding of the contingencies that affect parental adherence beyond the supervised clinic environment. An analysis of the contingencies that strengthen or weaken adherence might suggest strategies to improve implementation outside the clinic setting. What follows is an analysis of the variables associated with adherence by parents to recommendations designed to solve common childhood problems. PMID:11051583

Introducing Teamwork Challenges in Simulation Using Game Cards.

PubMed

Chang, Todd P; Kwan, Karen Y; Liberman, Danica; Song, Eric; Dao, Eugene H; Chung, Dayun; Morton, Inge; Festekjian, Ara

2015-08-01

Poor teamwork and communication during resuscitations are linked to patient safety problems and poorer outcomes. We present a novel simulation-based educational intervention using game cards to introduce challenges in teamwork. This intervention uses sets of game cards that designate roles, limitations, or communication challenges designed to introduce common communication or teamwork problems. Game cards are designed to be applicable for any simulation-based scenario and are independent from patient physiology. In our example, participants were pediatric emergency medicine fellows undergoing simulation training for orientation. We describe the use of card sets in different scenarios with increasing teamwork challenge and difficulty. Both postscenario and summative debriefings were facilitated to allow participants to reflect on their performance and discover ways to apply their strategies to real resuscitations. In this article, we present our experience with the novel use of game cards to modify simulation scenarios to improve communication and teamwork skills.

Structural health monitoring feature design by genetic programming

NASA Astrophysics Data System (ADS)

Harvey, Dustin Y.; Todd, Michael D.

2014-09-01

Structural health monitoring (SHM) systems provide real-time damage and performance information for civil, aerospace, and other high-capital or life-safety critical structures. Conventional data processing involves pre-processing and extraction of low-dimensional features from in situ time series measurements. The features are then input to a statistical pattern recognition algorithm to perform the relevant classification or regression task necessary to facilitate decisions by the SHM system. Traditional design of signal processing and feature extraction algorithms can be an expensive and time-consuming process requiring extensive system knowledge and domain expertise. Genetic programming, a heuristic program search method from evolutionary computation, was recently adapted by the authors to perform automated, data-driven design of signal processing and feature extraction algorithms for statistical pattern recognition applications. The proposed method, called Autofead, is particularly suitable to handle the challenges inherent in algorithm design for SHM problems where the manifestation of damage in structural response measurements is often unclear or unknown. Autofead mines a training database of response measurements to discover information-rich features specific to the problem at hand. This study provides experimental validation on three SHM applications including ultrasonic damage detection, bearing damage classification for rotating machinery, and vibration-based structural health monitoring. Performance comparisons with common feature choices for each problem area are provided demonstrating the versatility of Autofead to produce significant algorithm improvements on a wide range of problems.

Open architecture design and approach for the Integrated Sensor Architecture (ISA)

NASA Astrophysics Data System (ADS)

Moulton, Christine L.; Krzywicki, Alan T.; Hepp, Jared J.; Harrell, John; Kogut, Michael

2015-05-01

Integrated Sensor Architecture (ISA) is designed in response to stovepiped integration approaches. The design, based on the principles of Service Oriented Architectures (SOA) and Open Architectures, addresses the problem of integration, and is not designed for specific sensors or systems. The use of SOA and Open Architecture approaches has led to a flexible, extensible architecture. Using these approaches, and supported with common data formats, open protocol specifications, and Department of Defense Architecture Framework (DoDAF) system architecture documents, an integration-focused architecture has been developed. ISA can help move the Department of Defense (DoD) from costly stovepipe solutions to a more cost-effective plug-and-play design to support interoperability.

Comparison of Behavioral and Sexual Problems between Intellectually Disabled and Normal Adolescent Boys during Puberty in Yazd, Iran

PubMed Central

Akrami, Leila; Davudi, Maryam

2014-01-01

Objective: To compare sexual and behavioral puberty problems between intellectually disabled (ID) and normal boys in Yazd, Iran. Methods: In the present study, 65 intellectually disabled and 65 normal boys were included. The Child Behavior Check List (CBCL) was used to investigate behavioral problems. In order to study sexual problems, a questionnaire that was designed by the researchers was applie. Results: Anxiety, depression, social problems, attention problems, aggressiveness, and sexual problems were more frequent in intellectually disabled boys than in normal boys. On the other hand, regarding somatic complaints, withdrawal, thought problems, internalizing, delinquent behavior, and externalizing there was no difference between the two groups. Conclusion: Behavioral and sexual problems are more common in adolescent boys with intellectual disability (ID) than in normal boys during the puberty period. Therefore, puberty is an important period for intellectually disabled boys and their families; this should be taken into consideration by psychologists and clinicians. PMID:25053959

Apollo experience report: The problem of stress-corrosion cracking

NASA Technical Reports Server (NTRS)

Johnson, R. E.

1973-01-01

Stress-corrosion cracking has been the most common cause of structural-material failures in the Apollo Program. The frequency of stress-corrosion cracking has been high and the magnitude of the problem, in terms of hardware lost and time and money expended, has been significant. In this report, the significant Apollo Program experiences with stress-corrosion cracking are discussed. The causes of stress-corrosion cracking and the corrective actions are discussed, in terminology familiar to design engineers and management personnel, to show how stress-corrosion cracking can be prevented.

NASA Astrophysics Data System (ADS)

2018-05-01

Eigenvalues and eigenvectors, together, constitute the eigenstructure of the system. The design of vibrating systems aimed at satisfying specifications on eigenvalues and eigenvectors, which is commonly known as eigenstructure assignment, has drawn increasing interest over the recent years. The most natural mathematical framework for such problems is constituted by the inverse eigenproblems, which consist in the determination of the system model that features a desired set of eigenvalues and eigenvectors. Although such a problem is intrinsically challenging, several solutions have been proposed in the literature. The approaches to eigenstructure assignment can be basically divided into passive control and active control.

Optimal platform design using non-dominated sorting genetic algorithm II and technique for order of preference by similarity to ideal solution; application to automotive suspension system

NASA Astrophysics Data System (ADS)

Shojaeefard, Mohammad Hassan; Khalkhali, Abolfazl; Faghihian, Hamed; Dahmardeh, Masoud

2018-03-01

Unlike conventional approaches where optimization is performed on a unique component of a specific product, optimum design of a set of components for employing in a product family can cause significant reduction in costs. Increasing commonality and performance of the product platform simultaneously is a multi-objective optimization problem (MOP). Several optimization methods are reported to solve these MOPs. However, what is less discussed is how to find the trade-off points among the obtained non-dominated optimum points. This article investigates the optimal design of a product family using non-dominated sorting genetic algorithm II (NSGA-II) and proposes the employment of technique for order of preference by similarity to ideal solution (TOPSIS) method to find the trade-off points among the obtained non-dominated results while compromising all objective functions together. A case study for a family of suspension systems is presented, considering performance and commonality. The results indicate the effectiveness of the proposed method to obtain the trade-off points with the best possible performance while maximizing the common parts.

Agile Data Curation Case Studies Leading to the Identification and Development of Data Curation Design Patterns

NASA Astrophysics Data System (ADS)

Benedict, K. K.; Lenhardt, W. C.; Young, J. W.; Gordon, L. C.; Hughes, S.; Santhana Vannan, S. K.

2017-12-01

The planning for and development of efficient workflows for the creation, reuse, sharing, documentation, publication and preservation of research data is a general challenge that research teams of all sizes face. In response to: requirements from funding agencies for full-lifecycle data management plans that will result in well documented, preserved, and shared research data products increasing requirements from publishers for shared data in conjunction with submitted papers interdisciplinary research team's needs for efficient data sharing within projects, and increasing reuse of research data for replication and new, unanticipated research, policy development, and public use alternative strategies to traditional data life cycle approaches must be developed and shared that enable research teams to meet these requirements while meeting the core science objectives of their projects within the available resources. In support of achieving these goals, the concept of Agile Data Curation has been developed in which there have been parallel activities in support of 1) identifying a set of shared values and principles that underlie the objectives of agile data curation, 2) soliciting case studies from the Earth science and other research communities that illustrate aspects of what the contributors consider agile data curation methods and practices, and 3) identifying or developing design patterns that are high-level abstractions from successful data curation practice that are related to common data curation problems for which common solution strategies may be employed. This paper provides a collection of case studies that have been contributed by the Earth science community, and an initial analysis of those case studies to map them to emerging shared data curation problems and their potential solutions. Following the initial analysis of these problems and potential solutions, existing design patterns from software engineering and related disciplines are identified as a starting point for the development of a catalog of data curation design patterns that may be reused in the design and execution of new data curation processes.

‘Can he have the test for bipolar, doctor? His dad's got it’: exploring the potential of general practitioners to work with children and young people presenting in primary care with common mental health problems – a clinical initiative

PubMed Central

2012-01-01

Background General practitioners (GPs) play a key role in assessing and managing adult mental health problems, but this input is not seen in their management of child and adolescent mental health. Mental health problems in 5–19-year-olds are common, yet detection rates in primary care are low. The symptoms of most adult diagnoses of mental health problems are present by mid-adolescence, yet the typical time from onset to diagnosis is 5–15 years. The role of general practice in this area has been underexplored. Aim This pilot study explores the potential of GPs to respond to common mental health problems in children and adolescents. Design Children and young people who would have ordinarily been referred to Child and Adolescent Mental Health Services (CAMHS) were seen in a GP setting. In a UK general practice surgery serving a disadvantaged population. Method Children and young people were seen for an initial biopsychosocial assessment and formulation of the presenting concerns. GP-based interventions were offered as appropriate or referred to CAMHS. Results Data from the first 50 children (2–19 years) are presented. Twenty younger children (10 years and under) and 30 older children (11 years and above) were seen. Eighteen referrals were made to CAMHS. GP interventions included watchful waiting, brief behavioural interventions, non-directive counselling, brief cognitive– behavioural therapy (CBT) and liaison with colleagues in education, CAMHS and the voluntary sector. Conclusion This clinical pilot demonstrates that with adequate time, access to supervision and practice support, children and young people experiencing emotional and behavioural problems associated with common mental health issues can be helped in primary care. PMID:23730336

Anthropometric accommodation in USAF cockpits

NASA Technical Reports Server (NTRS)

Zehner, Gregory F.

1994-01-01

Over the past three years, a new set of methodologies has been developed to specify and evaluate anthropometric accommodation in USAF crewstation designs. These techniques are used to improve the ability of the pilot to reach controls, to safely escape the aircraft, to achieve adequate mobility and comfort, and to assure full access to the visual field both inside and outside the aircraft. This paper summarized commonly encountered aircraft accommodation problems, explains the failure of the traditional 'percentile man' design concept to resolve these difficulties, and suggests an alternative approach for improving cockpit design to better accommodate today's more heterogeneous flying population.

The Army/Air Force RAMCAD (Reliability and Maintainability Computer-Aided Design) Program Progress Report Through September 1989

DTIC Science & Technology

1990-01-01

deal with platforms and their weapons. Two approaches emerged from this effort. The first plan was to address the benefits and the problems involved in...inadam~ or on a remnoftd lcod oompLusr. 3. The Nwaiguior tabthe DGMSIt aD wWe rq4he datatote ApicadwProW tip FaMW Tebs. *4. The didaI formailed for...demonstrated the benefits to be gained in time and training cost of a common method for operating different computer programs. It is this common mode of

KSC-2011-2259

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – About 60 high school teams take part in the "For Inspiration and Recognition of Science and Technology," or FIRST, competition at the University of Central Florida in Orlando. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

KSC-2011-2260

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – About 60 high school teams take part in the "For Inspiration and Recognition of Science and Technology," or FIRST, competition at the University of Central Florida in Orlando. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

Multidisciplinary Concurrent Design Optimization via the Internet

NASA Technical Reports Server (NTRS)

Woodard, Stanley E.; Kelkar, Atul G.; Koganti, Gopichand

2001-01-01

A methodology is presented which uses commercial design and analysis software and the Internet to perform concurrent multidisciplinary optimization. The methodology provides a means to develop multidisciplinary designs without requiring that all software be accessible from the same local network. The procedures are amenable to design and development teams whose members, expertise and respective software are not geographically located together. This methodology facilitates multidisciplinary teams working concurrently on a design problem of common interest. Partition of design software to different machines allows each constituent software to be used on the machine that provides the most economy and efficiency. The methodology is demonstrated on the concurrent design of a spacecraft structure and attitude control system. Results are compared to those derived from performing the design with an autonomous FORTRAN program.

Common and Unique Impairments in Facial-Expression Recognition in Pervasive Developmental Disorder-Not Otherwise Specified and Asperger's Disorder

ERIC Educational Resources Information Center

Uono, Shota; Sato, Wataru; Toichi, Motomi

2013-01-01

This study was designed to identify specific difficulties and associated features related to the problems with social interaction experienced by individuals with pervasive developmental disorder-not otherwise specified (PDD-NOS) using an emotion-recognition task. We compared individuals with PDD-NOS or Asperger's disorder (ASP) and typically…

Abdominal Massage for the Treatment of Idiopathic Constipation in Children with Profound Learning Disabilities: A Single Case Study Design

ERIC Educational Resources Information Center

Moss, Lucy; Smith, Melanie; Wharton, Sarah; Hames, Annette

2008-01-01

Chronic constipation is a common problem in people with learning disabilities. Treatment often involves dietary changes or long-term laxative use. The participants were five children with profound learning disabilities and additional physical difficulties. Their long-standing idiopathic constipation was managed by laxatives. Intervention lasted up…

Film Editing Handbook; Technique of 16mm Film Cutting.

ERIC Educational Resources Information Center

Churchill, Hugh B.

Designed to help the film student with the complexities of 16mm film cutting, this handbook catalogs the mechanical procedures of both picture and sound cutting and supplies step-by-step explanations of these procedures. Because the handbook was organized so that it could be used while working at the cutting bench, common cutting problems and…

Defense Dollars and Sense: A Common Cause Guide to the Defense Budget Process.

ERIC Educational Resources Information Center

Rovner, Mark

Designed to increase public awareness of military spending, this 5-part guide examines the process and problems of preparing the national defense budget. The publication begins with a brief overview of the 1984 defense budget. Major military programs, trends in budgeting, and key concerns in budget formulation are explored. Graphs and charts…

Gamification for Non-Majors Mathematics: An Innovative Assignment Model

ERIC Educational Resources Information Center

Leong, Siow Hoo; Tang, Howe Eng

2017-01-01

The most important ingredient of the pedagogy for teaching non-majors is getting their engagement. This paper proposes to use gamification to engage non-majors. An innovative game termed as Cover the Hungarian's Zeros is designed to tackle the common weakness of non-majors mathematics in solving the assignment problem using the Hungarian Method.…

"Infotectives" on the "Infobahn": Designing Internet-Aided Projects for the Social Studies Classroom.

ERIC Educational Resources Information Center

Maskin, Melvin R.

1996-01-01

Describes three social studies projects tackled by students at the Bronx High School of Science: an extracredit activity on doing business in Manhattan, a citizen-participation project on fixing the United States, and a cooperative activity to identify problems common to Tokyo and New York City. Using the Internet to solve real-world problems…

The Library Manager's Deskbook: 102 Expert Solutions to 101 Common Dilemmas.

ERIC Educational Resources Information Center

Carson, Paula Phillips; And Others

This is a handbook of advice for handling the everyday problems encountered in all types and sizes of libraries. It is designed to assist managers before, during, and after crises develop. Organized in an question-and-answer format, it tackles many dilemmas that can occur in the library, then offers solutions drawn from actual experience. The…

The Departmental Chairman and the Public Institution or It's a Bird, It's a Plane, No It's a . . . . . .

ERIC Educational Resources Information Center

Metty, Michael P.

The Campus Governance Project investigated the nature and significance of the governance processes on 17 institutionally diverse colleges and universities in order to find commonalities across and within institutions. A pre-interview questionnaire was designed to elicit perceived problems at the institution and names of people seen as good sources…

The Value of Workshops on Psychological Flexibility for Early Childhood Special Education Staff

ERIC Educational Resources Information Center

Biglan, Anthony; Layton, Georgia L.; Jones, Laura Backen; Hankins, Martin; Rusby, Julie C.

2013-01-01

High stress and burnout are common for early childhood special educators, contributing to high rates of attrition, diminished educational effectiveness, and high turnover. Acceptance and Commitment Therapy (ACT) is a promising approach for the prevention and treatment of a wide variety of problems. Using a randomized wait-list control design, this…

Industrial Design: A Phoenix Reborn from the Ashes of Technology Education--A Case History

ERIC Educational Resources Information Center

Greenwald, Martin; Feigler, Denis

2009-01-01

Like the "phoenix," technology education (TE) can, under the right circumstances, give life to new programs--curricula with different emphases and directions from technology education, yet sharing a common heritage: the belief that applied technology will continue to shape the world. How that shaping process takes place--and the problems that it…

Virtual Manufacturing Techniques Designed and Applied to Manufacturing Activities in the Manufacturing Integration and Technology Branch

NASA Technical Reports Server (NTRS)

Shearrow, Charles A.

1999-01-01

One of the identified goals of EM3 is to implement virtual manufacturing by the time the year 2000 has ended. To realize this goal of a true virtual manufacturing enterprise the initial development of a machinability database and the infrastructure must be completed. This will consist of the containment of the existing EM-NET problems and developing machine, tooling, and common materials databases. To integrate the virtual manufacturing enterprise with normal day to day operations the development of a parallel virtual manufacturing machinability database, virtual manufacturing database, virtual manufacturing paradigm, implementation/integration procedure, and testable verification models must be constructed. Common and virtual machinability databases will include the four distinct areas of machine tools, available tooling, common machine tool loads, and a materials database. The machine tools database will include the machine envelope, special machine attachments, tooling capacity, location within NASA-JSC or with a contractor, and availability/scheduling. The tooling database will include available standard tooling, custom in-house tooling, tool properties, and availability. The common materials database will include materials thickness ranges, strengths, types, and their availability. The virtual manufacturing databases will consist of virtual machines and virtual tooling directly related to the common and machinability databases. The items to be completed are the design and construction of the machinability databases, virtual manufacturing paradigm for NASA-JSC, implementation timeline, VNC model of one bridge mill and troubleshoot existing software and hardware problems with EN4NET. The final step of this virtual manufacturing project will be to integrate other production sites into the databases bringing JSC's EM3 into a position of becoming a clearing house for NASA's digital manufacturing needs creating a true virtual manufacturing enterprise.

Analytical design of an industrial two-term controller for optimal regulatory control of open-loop unstable processes under operational constraints.

PubMed

Tchamna, Rodrigue; Lee, Moonyong

2018-01-01

This paper proposes a novel optimization-based approach for the design of an industrial two-term proportional-integral (PI) controller for the optimal regulatory control of unstable processes subjected to three common operational constraints related to the process variable, manipulated variable and its rate of change. To derive analytical design relations, the constrained optimal control problem in the time domain was transformed into an unconstrained optimization problem in a new parameter space via an effective parameterization. The resulting optimal PI controller has been verified to yield optimal performance and stability of an open-loop unstable first-order process under operational constraints. The proposed analytical design method explicitly takes into account the operational constraints in the controller design stage and also provides useful insights into the optimal controller design. Practical procedures for designing optimal PI parameters and a feasible constraint set exclusive of complex optimization steps are also proposed. The proposed controller was compared with several other PI controllers to illustrate its performance. The robustness of the proposed controller against plant-model mismatch has also been investigated. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Diffractive elements for generating microscale laser beam patterns: a Y2K problem

NASA Astrophysics Data System (ADS)

Teiwes, Stephan; Krueger, Sven; Wernicke, Guenther K.; Ferstl, Margit

2000-03-01

Lasers are widely used in industrial fabrication for engraving, cutting and many other purposes. However, material processing at very small scales is still a matter of concern. Advances in diffractive optics could provide for laser systems that could be used for engraving or cutting of micro-scale patterns at high speeds. In our paper we focus on the design of diffractive elements which can be used for this special application. It is a common desire in material processing to apply 'discrete' as well as 'continuous' beam patterns. Especially, the latter case is difficult to handle as typical micro-scale patterns are characterized by bad band-limitation properties, and as speckles can easily occur in beam patterns. It is shown in this paper that a standard iterative design method usually fails to obtain diffractive elements that generate diffraction patterns with acceptable quality. Insights gained from an analysis of the design problems are used to optimize the iterative design method. We demonstrate applicability and success of our approach by the design of diffractive phase elements that generate a discrete and a continuous 'Y2K' pattern.

An iterative method for tri-level quadratic fractional programming problems using fuzzy goal programming approach

NASA Astrophysics Data System (ADS)

Kassa, Semu Mitiku; Tsegay, Teklay Hailay

2017-08-01

Tri-level optimization problems are optimization problems with three nested hierarchical structures, where in most cases conflicting objectives are set at each level of hierarchy. Such problems are common in management, engineering designs and in decision making situations in general, and are known to be strongly NP-hard. Existing solution methods lack universality in solving these types of problems. In this paper, we investigate a tri-level programming problem with quadratic fractional objective functions at each of the three levels. A solution algorithm has been proposed by applying fuzzy goal programming approach and by reformulating the fractional constraints to equivalent but non-fractional non-linear constraints. Based on the transformed formulation, an iterative procedure is developed that can yield a satisfactory solution to the tri-level problem. The numerical results on various illustrative examples demonstrated that the proposed algorithm is very much promising and it can also be used to solve larger-sized as well as n-level problems of similar structure.

Synthesis of a controller for stabilizing the motion of a rigid body about a fixed point

NASA Astrophysics Data System (ADS)

Zabolotnov, Yu. M.; Lobanov, A. A.

2017-05-01

A method for the approximate design of an optimal controller for stabilizing the motion of a rigid body about a fixed point is considered. It is assumed that rigid body motion is nearly the motion in the classical Lagrange case. The method is based on the common use of the Bellman dynamic programming principle and the averagingmethod. The latter is used to solve theHamilton-Jacobi-Bellman equation approximately, which permits synthesizing the controller. The proposed method for controller design can be used in many problems close to the problem of motion of the Lagrange top (the motion of a rigid body in the atmosphere, the motion of a rigid body fastened to a cable in deployment of the orbital cable system, etc.).

Power Quality Improvement by Unified Power Quality Conditioner Based on CSC Topology Using Synchronous Reference Frame Theory

PubMed Central

Dharmalingam, Rajasekaran; Dash, Subhransu Sekhar; Senthilnathan, Karthikrajan; Mayilvaganan, Arun Bhaskar; Chinnamuthu, Subramani

2014-01-01

This paper deals with the performance of unified power quality conditioner (UPQC) based on current source converter (CSC) topology. UPQC is used to mitigate the power quality problems like harmonics and sag. The shunt and series active filter performs the simultaneous elimination of current and voltage problems. The power fed is linked through common DC link and maintains constant real power exchange. The DC link is connected through the reactor. The real power supply is given by the photovoltaic system for the compensation of power quality problems. The reference current and voltage generation for shunt and series converter is based on phase locked loop and synchronous reference frame theory. The proposed UPQC-CSC design has superior performance for mitigating the power quality problems. PMID:25013854

Power quality improvement by unified power quality conditioner based on CSC topology using synchronous reference frame theory.

PubMed

Dharmalingam, Rajasekaran; Dash, Subhransu Sekhar; Senthilnathan, Karthikrajan; Mayilvaganan, Arun Bhaskar; Chinnamuthu, Subramani

2014-01-01

This paper deals with the performance of unified power quality conditioner (UPQC) based on current source converter (CSC) topology. UPQC is used to mitigate the power quality problems like harmonics and sag. The shunt and series active filter performs the simultaneous elimination of current and voltage problems. The power fed is linked through common DC link and maintains constant real power exchange. The DC link is connected through the reactor. The real power supply is given by the photovoltaic system for the compensation of power quality problems. The reference current and voltage generation for shunt and series converter is based on phase locked loop and synchronous reference frame theory. The proposed UPQC-CSC design has superior performance for mitigating the power quality problems.

Reducing heavy alcohol consumption in young restaurant workers.

PubMed

Broome, Kirk M; Bennett, Joel B

2011-01-01

Restaurant employees often have high rates of heavy drinking and problems with alcohol. This study evaluates reductions in drinking and associated problems at work, in connection with a new program for prevention and early intervention. The program, called Team Resilience, is designed for young restaurant workers. A cluster-randomized trial design was used, with 28 stores from a national casual-dining restaurant chain and 235 of their employees (54% male, 46% female). Fourteen stores received the Team Resilience training workshop, consisting of three 2-hour sessions held on 3 consecutive days. Sessions included group discussion, role-play and practice activities, and a learning game. Workers in trained stores reported significantly greater decreases in recurring heavy drinking (i.e., having five or more drinks on the same occasion, on 5 or more days in the past month) and work-related problems with alcohol than workers in control stores. In the intervention group, the odds of recurring heavy drinking declined by about one half and the number of work-related problem areas declined by one third following training. In addition, drinking behaviors and problems were tied to age and were most common among employees in their middle 20s. Findings support Team Resilience as an effective intervention for reducing drinking and associated problems among young restaurant workers, a population with substantial needs.

The impacts of problem gambling on concerned significant others accessing web-based counselling.

PubMed

Dowling, Nicki A; Rodda, Simone N; Lubman, Dan I; Jackson, Alun C

2014-08-01

The 'concerned significant others' (CSOs) of people with problem gambling frequently seek professional support. However, there is surprisingly little research investigating the characteristics or help-seeking behaviour of these CSOs, particularly for web-based counselling. The aims of this study were to describe the characteristics of CSOs accessing the web-based counselling service (real time chat) offered by the Australian national gambling web-based counselling site, explore the most commonly reported CSO impacts using a new brief scale (the Problem Gambling Significant Other Impact Scale: PG-SOIS), and identify the factors associated with different types of CSO impact. The sample comprised all 366 CSOs accessing the service over a 21 month period. The findings revealed that the CSOs were most often the intimate partners of problem gamblers and that they were most often females aged under 30 years. All CSOs displayed a similar profile of impact, with emotional distress (97.5%) and impacts on the relationship (95.9%) reported to be the most commonly endorsed impacts, followed by impacts on social life (92.1%) and finances (91.3%). Impacts on employment (83.6%) and physical health (77.3%) were the least commonly endorsed. There were few significant differences in impacts between family members (children, partners, parents, and siblings), but friends consistently reported the lowest impact scores. Only prior counselling experience and Asian cultural background were consistently associated with higher CSO impacts. The findings can serve to inform the development of web-based interventions specifically designed for the CSOs of problem gamblers. Copyright © 2014 Elsevier Ltd. All rights reserved.

An accurate binding interaction model in de novo computational protein design of interactions: if you build it, they will bind.

PubMed

London, Nir; Ambroggio, Xavier

2014-02-01

Computational protein design efforts aim to create novel proteins and functions in an automated manner and, in the process, these efforts shed light on the factors shaping natural proteins. The focus of these efforts has progressed from the interior of proteins to their surface and the design of functions, such as binding or catalysis. Here we examine progress in the development of robust methods for the computational design of non-natural interactions between proteins and molecular targets such as other proteins or small molecules. This problem is referred to as the de novo computational design of interactions. Recent successful efforts in de novo enzyme design and the de novo design of protein-protein interactions open a path towards solving this problem. We examine the common themes in these efforts, and review recent studies aimed at understanding the nature of successes and failures in the de novo computational design of interactions. While several approaches culminated in success, the use of a well-defined structural model for a specific binding interaction in particular has emerged as a key strategy for a successful design, and is therefore reviewed with special consideration. Copyright © 2013 Elsevier Inc. All rights reserved.

Can callous-unemotional traits enhance the understanding, diagnosis, and treatment of serious conduct problems in children and adolescents? A comprehensive review.

PubMed

Frick, Paul J; Ray, James V; Thornton, Laura C; Kahn, Rachel E

2014-01-01

This article provides a comprehensive review of the research on the use of callous and unemotional (CU) traits for designating an important subgroup of children and adolescents with severe conduct problems. It focuses on the etiological significance of recognizing this subgroup of youths with severe conduct problems, its implications for diagnostic classification, and the treatment implications of this research. The review highlights limitations in existing research and provides directions for future research. The available research suggests that children and adolescents with severe conduct problems and elevated CU traits show distinct genetic, cognitive, emotional, biological, environmental, and personality characteristics that seem to implicate different etiological factors underlying their behavior problems relative to other youths with severe conduct problems. Recognizing these subgroups could be critical for guiding future research on the causes of severe conduct problems in children and adolescents. Further, children and adolescents with both severe conduct problems and elevated CU traits appear to be at risk for more severe and persistent antisocial outcomes, even controlling for the severity of their conduct problems, the age of onset of their conduct problems, and common comorbid problems, which supports the clinical importance of designating this group in diagnostic classification systems. Finally, although children and adolescents with both severe conduct problems and elevated CU traits tend to respond less positively to typical interventions provided in mental health and juvenile justice settings, they show positive responses to certain intensive interventions tailored to their unique emotional and cognitive characteristics. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

Online learning control using adaptive critic designs with sparse kernel machines.

PubMed

Xu, Xin; Hou, Zhongsheng; Lian, Chuanqiang; He, Haibo

2013-05-01

In the past decade, adaptive critic designs (ACDs), including heuristic dynamic programming (HDP), dual heuristic programming (DHP), and their action-dependent ones, have been widely studied to realize online learning control of dynamical systems. However, because neural networks with manually designed features are commonly used to deal with continuous state and action spaces, the generalization capability and learning efficiency of previous ACDs still need to be improved. In this paper, a novel framework of ACDs with sparse kernel machines is presented by integrating kernel methods into the critic of ACDs. To improve the generalization capability as well as the computational efficiency of kernel machines, a sparsification method based on the approximately linear dependence analysis is used. Using the sparse kernel machines, two kernel-based ACD algorithms, that is, kernel HDP (KHDP) and kernel DHP (KDHP), are proposed and their performance is analyzed both theoretically and empirically. Because of the representation learning and generalization capability of sparse kernel machines, KHDP and KDHP can obtain much better performance than previous HDP and DHP with manually designed neural networks. Simulation and experimental results of two nonlinear control problems, that is, a continuous-action inverted pendulum problem and a ball and plate control problem, demonstrate the effectiveness of the proposed kernel ACD methods.

Alignment of the Stanford Linear Collider Arcs: Concepts and results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pitthan, R.; Bell, B.; Friedsam, H.

1987-02-01

The alignment of the Arcs for the Stanford Linear Collider at SLAC has posed problems in accelerator survey and alignment not encountered before. These problems come less from the tight tolerances of 0.1 mm, although reaching such a tight statistically defined accuracy in a controlled manner is difficult enough, but from the absence of a common reference plane for the Arcs. Traditional circular accelerators, including HERA and LEP, have been designed in one plane referenced to local gravity. For the SLC Arcs no such single plane exists. Methods and concepts developed to solve these and other problems, connected with themore » unique design of SLC, range from the first use of satellites for accelerator alignment, use of electronic laser theodolites for placement of components, computer control of the manual adjustment process, complete automation of the data flow incorporating the most advanced concepts of geodesy, strict separation of survey and alignment, to linear principal component analysis for the final statistical smoothing of the mechanical components.« less

Rotational-path decomposition based recursive planning for spacecraft attitude reorientation

NASA Astrophysics Data System (ADS)

Xu, Rui; Wang, Hui; Xu, Wenming; Cui, Pingyuan; Zhu, Shengying

2018-02-01

The spacecraft reorientation is a common task in many space missions. With multiple pointing constraints, it is greatly difficult to solve the constrained spacecraft reorientation planning problem. To deal with this problem, an efficient rotational-path decomposition based recursive planning (RDRP) method is proposed in this paper. The uniform pointing-constraint-ignored attitude rotation planning process is designed to solve all rotations without considering pointing constraints. Then the whole path is checked node by node. If any pointing constraint is violated, the nearest critical increment approach will be used to generate feasible alternative nodes in the process of rotational-path decomposition. As the planning path of each subdivision may still violate pointing constraints, multiple decomposition is needed and the reorientation planning is designed as a recursive manner. Simulation results demonstrate the effectiveness of the proposed method. The proposed method has been successfully applied in two SPARK microsatellites to solve onboard constrained attitude reorientation planning problem, which were developed by the Shanghai Engineering Center for Microsatellites and launched on 22 December 2016.

Intelligent Sensors Security

PubMed Central

Bialas, Andrzej

2010-01-01

The paper is focused on the security issues of sensors provided with processors and software and used for high-risk applications. Common IT related threats may cause serious consequences for sensor system users. To improve their robustness, sensor systems should be developed in a restricted way that would provide them with assurance. One assurance creation methodology is Common Criteria (ISO/IEC 15408) used for IT products and systems. The paper begins with a primer on the Common Criteria, and then a general security model of the intelligent sensor as an IT product is discussed. The paper presents how the security problem of the intelligent sensor is defined and solved. The contribution of the paper is to provide Common Criteria (CC) related security design patterns and to improve the effectiveness of the sensor development process. PMID:22315571

[Survey on drug-related problems in Lithuania's pharmacies].

PubMed

Kubiliene, Loreta; Liukenskyte, Simona; Savickas, Arūnas; Jureniene, Kristina

2006-01-01

to survey the most common and the most important drug-related problems in Lithuania, to explore their solution and factors influencing it, to formulate recommendations for solving drug-related problems. Pharmacists from community pharmacies participated in a random survey. They filled in questionnaires about drug-related problems and their solutions. It was the first survey on drug-related problems ever carried out in Lithuania. For the first time, it was found out that in Lithuania pharmacists most commonly encountered drug-related problem--additional drug therapy (52.03% of respondents)--and most rarely encountered drug-related problem--dosage too high (3% of respondents). Pharmacists stated that all categories of drug-related problems were of equal importance. It was established that pharmacists commonly solved drug-related problems associated with noncompliance with instructions (72.5% of respondents) and rarely met the problem when improper drug was selected (39.56% of respondents). Patients taking prescription medicines commonly encounter additional drug therapy problem, and patients taking nonprescription medications commonly encounter problems related to noncompliance with instructions.

Design of nano-groove photonic crystal cavities in lithium niobate.

PubMed

Li, Yihang; Wang, Cheng; Loncar, Marko

2015-06-15

We propose a novel design of photonic-crystal nanobeam cavities in lithium niobate (LN) for both TE and TM modes, addressing problems associated with tilted sidewalls, which commonly result from dry etching. Using optimized periodical nano-groove structures, the proposed devices could achieve quality factors as high as 3.9×10(6) with a modal volume of 5.0 (λ/n)3. We also show that such a design is promising for applications in nonlinear optics by theoretically predicting the efficiencies for electro-optic modulation and second-harmonic generation. The proposed nano-groove structures and design rules could also be applied for other material platforms that possess tilted sidewalls.

Innovating urinary catheter design: An introduction to the engineering challenge.

PubMed

Murphy, Cathy

2018-05-01

Every day, people around the world rely on intermittent and indwelling urinary catheters to manage bladder dysfunction, but the potential or actual harm caused by these devices is well-recognised. Current catheter designs can cause urinary tract infection and septicaemia, bladder and urethral trauma and indwelling devices frequently become blocked. Furthermore, the devices can severely disrupt users' lives, limiting their daily activities and can be costly to manage for healthcare providers. Despite this, little significant design innovation has taken place in the last 80 years. In this article current catheter designs and their limitations are reviewed, common catheter-associated problems are outlined and areas of design ripe for improvement proposed. The potential to relieve the individual and economic burden of catheter use is high.

Overlapping genetic and environmental influences among men's alcohol consumption and problems, romantic quality and social support.

PubMed

Salvatore, J E; Prom-Wormley, E; Prescott, C A; Kendler, K S

2015-08-01

Alcohol consumption and problems are associated with interpersonal difficulties. We used a twin design to assess in men the degree to which genetic or environmental influences contributed to the covariance between alcohol consumption and problems, romantic quality and social support. The sample included adult male-male twin pairs (697 monozygotic and 487 dizygotic) for whom there were interview-based data on: alcohol consumption (average monthly alcohol consumption in the past year); alcohol problems (lifetime alcohol dependence symptoms); romantic conflict and warmth; friend problems and support; and relative problems and support. Key findings were that genetic and unique environmental factors contributed to the covariance between alcohol consumption and romantic conflict; genetic factors contributed to the covariance between alcohol problems and romantic conflict; and common and unique environmental factors contributed to the covariance between alcohol problems and friend problems. Recognizing and addressing the overlapping genetic and environmental influences that alcohol consumption and problems share with romantic quality and other indicators of social support may have implications for substance use prevention and intervention efforts.

Nature and Role of Traditional Forms of Counselling in Zambia: A Case of Lusaka Province

ERIC Educational Resources Information Center

Chiboola, Hector; Munsaka, Sody M.

2018-01-01

The aim of this study was to determine the nature and role of traditional forms of counselling and the scope of common problems presented to traditional counsellors in Lusaka province. It used a qualitative research methodology and deployed a holistic single-case study design with multiple embedded units of analysis. The sample consisted of 80…

Clues to the Past

ERIC Educational Resources Information Center

Weaver, Julie K.

2010-01-01

Students love a mystery. So what do America's most majestic bird, a bag of habitat clues, and a soft-shelled egg have in common? This easy-to-do inquiry activity engages students as they connect clues to problem-solve how the bald eagle reached the brink of extinction in the 1960s in the lower 48 states. It was designed to give students an…

A Roadmap to Cope with Common Problems in E-Learning Research Designs

ERIC Educational Resources Information Center

Sarsa, Javier; Escudero, Tomás

2016-01-01

E-learning research is plenty of difficulties, as also research in education is. Usually, the high number of features involved in e-learning processes complicates and masks the identification and isolation of the factors which cause the expected benefits, when they exist. At the same time, a bunch of threats are ready to weaken the validity of the…

Motivating Visually Impaired and Deaf-Blind People to Perform Regular Physical Exercises

ERIC Educational Resources Information Center

Surakka, Airi; Kivela, Tero

2008-01-01

The aim of this study was to examine the different ways in which visually impaired and deaf-blind people can be motivated to perform regular physical exercises through the use of a physical training programme. The programme was designed for visually impaired and deaf-blind people with the aim of reducing their most common physical problems: those…

A Case Study Exploring the Perceptions of Educational Technology Leadership in a Rural School District

ERIC Educational Resources Information Center

Lichucki, Michael

2013-01-01

Although technology is common in our society, it has not universally become an expected practice in our schools. The problem that was addressed by the qualitative, case study design is that teachers and administrators do not share an understanding of educational technology leadership. School leaders that do not understand the needs of classroom…

Correcting the Errors in the Writing of University Students in the Comfortable Atmosphere

ERIC Educational Resources Information Center

Lu, Tuanhua

2010-01-01

This paper analyzed the common errors in university students' writing. At the same time, it showed some methods based on activities designed to give students practice in these problem areas. The activities are meant to be carried out in a comfortable, non-threatening atmosphere in which students can make positive steps toward reducing their errors…

An introduction to the COLIN optimization interface.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, William Eugene

2003-03-01

We describe COLIN, a Common Optimization Library INterface for C++. COLIN provides C++ template classes that define a generic interface for both optimization problems and optimization solvers. COLIN is specifically designed to facilitate the development of hybrid optimizers, for which one optimizer calls another to solve an optimization subproblem. We illustrate the capabilities of COLIN with an example of a memetic genetic programming solver.

Knowledge-based geographic information systems on the Macintosh computer: a component of the GypsES project

Treesearch

Gregory Elmes; Thomas Millette; Charles B. Yuill

1991-01-01

GypsES, a decision-support and expert system for the management of Gypsy Moth addresses five related research problems in a modular, computer-based project. The modules are hazard rating, monitoring, prediction, treatment decision and treatment implementation. One common component is a geographic information system designed to function intelligently. We refer to this...

Revising an Engineering Design Rubric: A Case Study Illustrating Principles and Practices to Ensure Technical Quality of Rubrics

ERIC Educational Resources Information Center

Goldberg, Gail Lynn

2014-01-01

This article provides a detailed account of a rubric revision process to address seven common problems to which rubrics are prone: lack of consistency and parallelism; the presence of "orphan" and "widow" words and phrases; redundancy in descriptors; inconsistency in the focus of qualifiers; limited routes to partial credit;…

Incentive compatibility in kidney exchange problems.

PubMed

Villa, Silvia; Patrone, Fioravante

2009-12-01

The problem of kidney exchanges shares common features with the classical problem of exchange of indivisible goods studied in the mechanism design literature, while presenting additional constraints on the size of feasible exchanges. The solution of a kidney exchange problem can be summarized in a mapping from the relevant underlying characteristics of the players (patients and their donors) to the set of matchings. The goal is to select only matchings maximizing a chosen welfare function. Since the final outcome heavily depends on the private information in possess of the players, a basic requirement in order to reach efficiency is the truthful revelation of this information. We show that for the kidney exchange problem, a class of (in principle) efficient mechanisms does not enjoy the incentive compatibility property and therefore is subject to possible manipulations made by the players in order to profit of the misrepresentation of their private information.

Supporting the design of office layout meeting ergonomics requirements.

PubMed

Margaritis, Spyros; Marmaras, Nicolas

2007-11-01

This paper proposes a method and an information technology tool aiming to support the ergonomics layout design of individual workstations in a given space (building). The proposed method shares common ideas with previous generic methods for office layout. However, it goes a step forward and focuses on the cognitive tasks which have to be carried out by the designer or the design team trying to alleviate them. This is achieved in two ways: (i) by decomposing the layout design problem to six main stages, during which only a limited number of variables and requirements are considered and (ii) by converting the ergonomics requirements to functional design guidelines. The information technology tool (ErgoOffice 0.1) automates certain phases of the layout design process, and supports the design team either by its editing and graphical facilities or by providing adequate memory support.

Field-based education and indigenous knowledge: Essential components of geoscience education for native American communities

NASA Astrophysics Data System (ADS)

Riggs, Eric M.

2005-03-01

The purpose of this study is to propose a framework drawing on theoretical and empirical science education research that explains the common prominent field-based components of the handful of persistent and successful Earth science education programs designed for indigenous communities in North America. These programs are primarily designed for adult learners, either in a postsecondary or in a technical education setting and all include active collaboration between local indigenous communities and geoscientists from nearby universities. Successful Earth science curricula for indigenous learners share in common an explicit emphasis on outdoor education, a place and problem-based structure, and the explicit inclusion of traditional indigenous knowledge in the instruction. Programs sharing this basic design have proven successful and popular for a wide range of indigenous cultures across North America. We present an analysis of common field-based elements to yield insight into indigenous Earth science education. We provide an explanation for the success of this design based in research on field-based learning, Native American learning styles research, and theoretical and empirical research into the nature and structure of indigenous knowledge. We also provide future research directions that can test and further refine our understanding of best practices in indigenous Earth science education.

Filovirus RefSeq Entries: Evaluation and Selection of Filovirus Type Variants, Type Sequences, and Names

PubMed Central

Kuhn, Jens H.; Andersen, Kristian G.; Bào, Yīmíng; Bavari, Sina; Becker, Stephan; Bennett, Richard S.; Bergman, Nicholas H.; Blinkova, Olga; Bradfute, Steven; Brister, J. Rodney; Bukreyev, Alexander; Chandran, Kartik; Chepurnov, Alexander A.; Davey, Robert A.; Dietzgen, Ralf G.; Doggett, Norman A.; Dolnik, Olga; Dye, John M.; Enterlein, Sven; Fenimore, Paul W.; Formenty, Pierre; Freiberg, Alexander N.; Garry, Robert F.; Garza, Nicole L.; Gire, Stephen K.; Gonzalez, Jean-Paul; Griffiths, Anthony; Happi, Christian T.; Hensley, Lisa E.; Herbert, Andrew S.; Hevey, Michael C.; Hoenen, Thomas; Honko, Anna N.; Ignatyev, Georgy M.; Jahrling, Peter B.; Johnson, Joshua C.; Johnson, Karl M.; Kindrachuk, Jason; Klenk, Hans-Dieter; Kobinger, Gary; Kochel, Tadeusz J.; Lackemeyer, Matthew G.; Lackner, Daniel F.; Leroy, Eric M.; Lever, Mark S.; Mühlberger, Elke; Netesov, Sergey V.; Olinger, Gene G.; Omilabu, Sunday A.; Palacios, Gustavo; Panchal, Rekha G.; Park, Daniel J.; Patterson, Jean L.; Paweska, Janusz T.; Peters, Clarence J.; Pettitt, James; Pitt, Louise; Radoshitzky, Sheli R.; Ryabchikova, Elena I.; Saphire, Erica Ollmann; Sabeti, Pardis C.; Sealfon, Rachel; Shestopalov, Aleksandr M.; Smither, Sophie J.; Sullivan, Nancy J.; Swanepoel, Robert; Takada, Ayato; Towner, Jonathan S.; van der Groen, Guido; Volchkov, Viktor E.; Volchkova, Valentina A.; Wahl-Jensen, Victoria; Warren, Travis K.; Warfield, Kelly L.; Weidmann, Manfred; Nichol, Stuart T.

2014-01-01

Sequence determination of complete or coding-complete genomes of viruses is becoming common practice for supporting the work of epidemiologists, ecologists, virologists, and taxonomists. Sequencing duration and costs are rapidly decreasing, sequencing hardware is under modification for use by non-experts, and software is constantly being improved to simplify sequence data management and analysis. Thus, analysis of virus disease outbreaks on the molecular level is now feasible, including characterization of the evolution of individual virus populations in single patients over time. The increasing accumulation of sequencing data creates a management problem for the curators of commonly used sequence databases and an entry retrieval problem for end users. Therefore, utilizing the data to their fullest potential will require setting nomenclature and annotation standards for virus isolates and associated genomic sequences. The National Center for Biotechnology Information’s (NCBI’s) RefSeq is a non-redundant, curated database for reference (or type) nucleotide sequence records that supplies source data to numerous other databases. Building on recently proposed templates for filovirus variant naming [ ()////-], we report consensus decisions from a majority of past and currently active filovirus experts on the eight filovirus type variants and isolates to be represented in RefSeq, their final designations, and their associated sequences. PMID:25256396

Organized DFM

NASA Astrophysics Data System (ADS)

Sato, Takashi; Honma, Michio; Itoh, Hiroyuki; Iriki, Nobuyuki; Kobayashi, Sachiko; Miyazaki, Norihiko; Onodera, Toshio; Suzuki, Hiroyuki; Yoshioka, Nobuyuki; Arima, Sumika; Kadota, Kazuya

2009-04-01

The category and objective of DFM production management are shown. DFM is not limited to an activity within a particular unit process in design and process. A new framework for DFM is required. DFM should be a total solution for the common problems of all processes. Each of them must be linked to one another organically. After passing through the whole of each process on the manufacturing platform, quality of final products is guaranteed and products are shipped to the market. The information platform is layered with DFM, APC, and AEC. Advanced DFM is not DFM for partial optimization of the lithography process and the design, etc. and it should be Organized DFM. They are managed with high-level organizational IQ. The interim quality between each step of the flow should be visualized. DFM will be quality engineering if it is Organized DFM and common metrics of the quality are provided. DFM becomes quality engineering through effective implementation of common industrial metrics and standardized technology. DFM is differential technology, but can leverage standards for efficient development.

Forks in the road: choices in procedures for designing wildland linkages.

PubMed

Beier, Paul; Majka, Daniel R; Spencer, Wayne D

2008-08-01

Models are commonly used to identify lands that will best maintain the ability of wildlife to move between wildland blocks through matrix lands after the remaining matrix has become incompatible with wildlife movement. We offer a roadmap of 16 choices and assumptions that arise in designing linkages to facilitate movement or gene flow of focal species between 2 or more predefined wildland blocks. We recommend designing linkages to serve multiple (rather than one) focal species likely to serve as a collective umbrella for all native species and ecological processes, explicitly acknowledging untested assumptions, and using uncertainty analysis to illustrate potential effects of model uncertainty. Such uncertainty is best displayed to stakeholders as maps of modeled linkages under different assumptions. We also recommend modeling corridor dwellers (species that require more than one generation to move their genes between wildland blocks) differently from passage species (for which an individual can move between wildland blocks within a few weeks). We identify a problem, which we call the subjective translation problem, that arises because the analyst must subjectively decide how to translate measurements of resource selection into resistance. This problem can be overcome by estimating resistance from observations of animal movement, genetic distances, or interpatch movements. There is room for substantial improvement in the procedures used to design linkages robust to climate change and in tools that allow stakeholders to compare an optimal linkage design to alternative designs that minimize costs or achieve other conservation goals.

User-Centered Design for Psychosocial Intervention Development and Implementation

PubMed Central

Lyon, Aaron R.; Koerner, Kelly

2018-01-01

The current paper articulates how common difficulties encountered when attempting to implement or scale-up evidence-based treatments are exacerbated by fundamental design problems, which may be addressed by a set of principles and methods drawn from the contemporary field of user-centered design. User-centered design is an approach to product development that grounds the process in information collected about the individuals and settings where products will ultimately be used. To demonstrate the utility of this perspective, we present four design concepts and methods: (a) clear identification of end users and their needs, (b) prototyping/rapid iteration, (c) simplifying existing intervention parameters/procedures, and (d) exploiting natural constraints. We conclude with a brief design-focused research agenda for the developers and implementers of evidence-based treatments. PMID:29456295

Residualization is not the answer: Rethinking how to address multicollinearity.

PubMed

York, Richard

2012-11-01

Here I show that a commonly used procedure to address problems stemming from collinearity and multicollinearity among independent variables in regression analysis, "residualization", leads to biased coefficient and standard error estimates and does not address the fundamental problem of collinearity, which is a lack of information. I demonstrate this using visual representations of collinearity, hypothetical experimental designs, and analyses of both artificial and real world data. I conclude by noting the importance of examining methodological practices to ensure that their validity can be established based on rational criteria. Copyright © 2012 Elsevier Inc. All rights reserved.

The Principle and the Application of Self-cleaning Anti-pollution Coating in Power System

NASA Astrophysics Data System (ADS)

Zhao, Y. J.; Zhang, Z. B.; Liu, Y.; Wang, J. H.; Teng, J. L.; Wu, L. S.; Zhang, Y. L.

2017-11-01

The common problem existed in power system is analyzed in this paper. The main reason for the affection of the safe and stable operation to power equipment is flash-over caused by dirt and discharge. Using the self-cleaning anti-pollution coating in the power equipment surface is the key to solve the problem. In the work, the research progress and design principle about the self-cleaning anti-pollution coating was summarized. Furthermore, the preparation technology was also studied. Finally, the application prospect of hard self-cleaning anti-pollution coating in power system was forecast.

LTA structures and materials technology

NASA Technical Reports Server (NTRS)

Mayer, N. J.

1975-01-01

The state-of-the-art concerning structures and materials technology is reviewed. It is shown that many present materials developments resulting from balloon and aircraft research programs can be applied to new concepts in LTA vehicles. Both buoyant and semi-buoyant vehicles utilize similar approaches to solving structural problems and could involve pressurized non-rigid and unpressurized rigid structures. System designs common to both and vital to structural integrity include much of the past technology as well. Further research is needed in determination of structural loads, especially in future design concepts.

Approximation Methods in Multidimensional Filter Design and Related Problems Encountered in Multidimensional System Design.

DTIC Science & Technology

1983-03-21

zero , it is necessary that B M(0) be nonzero. In the case considered here, B M(0) is taken to be nonsingula and withot loss of generality it may be set...452. (c.51 D. Levin, " General order Padd type rational approximants defined from a double power series," J. Inst. Maths. Applics., 18, 1976, pp. 1-8...common zeros in the closed unit bidisc, U- 2 . The 2-D setting provides a nice theoretical framework for generalization of these stabilization results to

Path planning and energy management of solar-powered unmanned ground vehicles

NASA Astrophysics Data System (ADS)

Kaplan, Adam

Many of the applications pertinent to unmanned vehicles, such as environmental research and analysis, communications, and information-surveillance and reconnaissance, benefit from prolonged vehicle operation time. Conventional efforts to increase the operational time of electric-powered unmanned vehicles have traditionally focused on the design of energy-efficient components and the identification of energy efficient search patterns, while little attention has been paid to the vehicle's mission-level path plan and power management. This thesis explores the formulation and generation of integrated motion-plans and power-schedules for solar-panel equipped mobile robots operating under strict energy constraints, which cannot be effectively addressed through conventional motion planning algorithms. Transit problems are considered to design time-optimal paths using both Balkcom-Mason and Pseudo-Dubins curves. Additionally, a more complicated problem to generate mission plans for vehicles which must persistently travel between certain locations, similar to the traveling salesperson problem (TSP), is presented. A comparison between one of the common motion-planning algorithms and experimental results of the prescribed algorithms, made possible by use of a test environment and mobile robot designed and developed specifically for this research, are presented and discussed.

Barrier-free design: a review and critique of the occupational therapy perspective.

PubMed

Cooper, B A; Cohen, U; Hasselkus, B R

1991-04-01

This review of the occupational therapy literature on barrier-free design identifies both a paucity of related occupational therapy research on the topic and a lack of a common conceptual base with which to guide the development and use of environmental assessments. Nonetheless, two fledgling themes can be extrapolated: the consistent reference to the concepts of accessibility, mobility, function, and safety and an increased awareness among occupational therapists regarding the accessibility standards developed by the American National Standards Institute (ANSI) (ANSI, 1971, 1980). A problem-solving model suggested by designers for the 1979 revision of ANSI standards that incorporates these conceptual themes is described and discussed.

Gas-Liquid Flows and Phase Separation

NASA Technical Reports Server (NTRS)

McQuillen, John

2004-01-01

Common issues for space system designers include:Ability to Verify Performance in Normal Gravity prior to Deployment; System Stability; Phase Accumulation & Shedding; Phase Separation; Flow Distribution through Tees & Manifolds Boiling Crisis; Heat Transfer Coefficient; and Pressure Drop.The report concludes:Guidance similar to "A design that operates in a single phase is less complex than a design that has two-phase flow" is not always true considering the amount of effort spent on pressurizing, subcooling and phase separators to ensure single phase operation. While there is still much to learn about two-phase flow in reduced gravity, we have a good start. Focus now needs to be directed more towards system level problems .

Role of multiple representations in physics problem solving

NASA Astrophysics Data System (ADS)

Maries, Alexandru

This thesis explores the role of multiple representations in introductory physics students' problem solving performance through several investigations. Representations can help students focus on the conceptual aspects of physics and play a major role in effective problem solving. Diagrammatic representations can play a particularly important role in the initial stages of conceptual analysis and planning of the problem solution. Findings suggest that students who draw productive diagrams are more successful problem solvers even if their approach is primarily mathematical. Furthermore, students provided with a diagram of the physical situation presented in a problem sometimes exhibited deteriorated performance. Think-aloud interviews suggest that this deteriorated performance is in part due to reduced conceptual planning time which caused students to jump to the implementation stage without fully understanding the problem and planning problem solution. Another study investigated two interventions aimed at improving introductory students' representational consistency between mathematical and graphical representations and revealed that excessive scaffolding can have a detrimental effect. The detrimental effect was partly due to increased cognitive load brought on by the additional steps and instructions. Moreover, students who exhibited representational consistency also showed improved problem solving performance. The final investigation is centered on a problem solving task designed to provide information about the pedagogical content knowledge (PCK) of graduate student teaching assistants (TAs). In particular, the TAs identified what they considered to be the most common difficulties of introductory physics students related to graphical representations of kinematics concepts as they occur in the Test of Understanding Graphs in Kinematics (TUG-K). As an extension, the Force Concept Inventory (FCI) was also used to assess this aspect of PCK related to knowledge of student difficulties of both physics instructors and TAs. We find that teaching an independent course and recent teaching experience do not correlate with improved PCK. In addition, the performance of American TAs, Chinese TAs and other foreign TAs in identifying common student difficulties both in the context of the TUG-K and in the context of the FCI is similar. Moreover, there were many common difficulties of introductory physics students that were not identified by many instructors and TAs.

Occupational Needs and Goals of Survivors of Domestic Violence.

PubMed

Javaherian-Dysinger, Heather; Krpalek, Dragana; Huecker, Esther; Hewitt, Liane; Cabrera, Michelle; Brown, Canique; Francis, Jason; Rogers, Katie; Server, Sage

2016-01-01

This study's purpose was to describe the occupational needs and goals of women residing in a domestic violence shelter and their self-perceived changes in satisfaction and occupational performance. Using a retrospective design, data from 68 occupational therapy evaluations from two domestic violence shelter settings were examined. Data were analyzed by coding problem areas and occupational goals and calculating frequencies for these variables. Where data were available, we also analyzed changes in pre- and postscores for self-perceived satisfaction and occupational performance (n = 25). The most common problem areas were leisure, education, work, child rearing, and health management. The most common goals were in the areas of education, work, health management, child rearing, and home management. Retrospective pre- and postchange scores in performance and satisfaction for 25 women were statistically significant. Findings provide direction for, and highlight the importance of occupational therapy services within domestic violence shelters as women regain their life skills.

KSC-2011-2253

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – NASA Kennedy Space Center Director Bob Cabana talks to high school students taking part in the "For Inspiration and Recognition of Science and Technology," or FIRST, competition at the University of Central Florida in Orlando. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

KSC-2011-2254

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – NASA Kennedy Space Center Director Bob Cabana talks to high school students taking part in the "For Inspiration and Recognition of Science and Technology," or FIRST, competition at the University of Central Florida in Orlando. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

Common Infant and Newborn Problems

MedlinePlus

It is hard when your baby is sick. Common health problems in babies include colds, coughs, fevers, and vomiting. Babies also commonly have skin problems, like diaper rash or cradle cap. Many of these problems are ... are worried about your baby, call your health care provider right away.

Implementation science for ambulatory care safety: a novel method to develop context-sensitive interventions to reduce quality gaps in monitoring high-risk patients.

PubMed

McDonald, Kathryn M; Su, George; Lisker, Sarah; Patterson, Emily S; Sarkar, Urmimala

2017-06-24

Missed evidence-based monitoring in high-risk conditions (e.g., cancer) leads to delayed diagnosis. Current technological solutions fail to close this safety gap. In response, we aim to demonstrate a novel method to identify common vulnerabilities across clinics and generate attributes for context-flexible population-level monitoring solutions for widespread implementation to improve quality. Based on interviews with staff in otolaryngology, pulmonary, urology, breast, and gastroenterology clinics at a large urban publicly funded health system, we applied journey mapping to co-develop a visual representation of how patients are monitored for high-risk conditions. Using a National Academies framework and context-sensitivity theory, we identified common systems vulnerabilities and developed preliminary concepts for improving the robustness for monitoring patients with high-risk conditions ("design seeds" for potential solutions). Finally, we conducted a face validity and prioritization assessment of the design seeds with the original interviewees. We identified five high-risk situations for potentially consequential diagnostic delays arising from suboptimal patient monitoring. All situations related to detection of cancer (head and neck, lung, prostate, breast, and colorectal). With clinic participants we created 5 journey maps, each representing specialty clinic workflow directed at evidence-based monitoring. System vulnerabilities common to the different clinics included challenges with: data systems, communications handoffs, population-level tracking, and patient activities. Clinic staff ranked 13 design seeds (e.g., keep patient list up to date, use triggered notifications) addressing these vulnerabilities. Each design seed has unique evaluation criteria for the usefulness of potential solutions developed from the seed. We identified and ranked 13 design seeds that characterize situations that clinicians described 'wake them up at night', and thus could reduce their anxiety, save time, and improve monitoring of high-risk patients. We anticipate that the design seed approach promotes robust and context-sensitive solutions to safety and quality problems because it provides a human-centered link between the experienced problem and various solutions that can be tested for viability. The study also demonstrates a novel integration of industrial and human factors methods (journey mapping, process tracing and design seeds) linked to implementation theory for use in designing interventions that anticipate and reduce implementation challenges.

Oral appliance therapy versus nasal continuous positive airway pressure in obstructive sleep apnoea syndrome: a randomised, placebo-controlled trial on self-reported symptoms of common sleep disorders and sleep-related problems.

PubMed

Nikolopoulou, M; Byraki, A; Ahlberg, J; Heymans, M W; Hamburger, H L; De Lange, J; Lobbezoo, F; Aarab, G

2017-06-01

Obstructive sleep apnoea syndrome (OSAS) is associated with several sleep disorders and sleep-related problems. Therefore, the aim of this study was to compare the effects of a mandibular advancement device (MAD) with those of nasal continuous positive airway pressure (nCPAP) on self-reported symptoms of common sleep disorders and sleep-related problems in mild and moderate OSAS patients. In this randomised placebo-controlled trial, sixty-four OSAS patients (52·0 ± 9·6 years) were randomly assigned to an MAD, nCPAP or an intra-oral placebo appliance in a parallel design. All participants filled out the validated Dutch Sleep Disorders Questionnaire (SDQ) twice: one before treatment and one after six months of treatment. With 88 questions, thirteen scales were constructed, representing common sleep disorders and sleep-related problems. Linear mixed model analyses were performed to study differences between the groups for the different SDQ scales over time. The MAD group showed significant improvements over time in symptoms corresponding with 'insomnia', 'excessive daytime sleepiness', 'psychiatric sleep disorder', 'periodic limb movements', 'sleep apnoea', 'sleep paralysis', 'daytime dysfunction', 'hypnagogic hallucinations/dreaming', 'restless sleep', 'negative conditioning' and 'automatic behaviour' (range of P values: 0·000-0·014). These improvements in symptoms were, however, not significantly different from the improvements in symptoms observed in the nCPAP and placebo groups (range of P values: 0·090-0·897). It can be concluded that there is no significant difference between MAD and nCPAP in their positive effects on self-reported symptoms of common sleep disorders and sleep-related problems in mild and moderate OSAS patients. These beneficial effects may be a result of placebo effects. © 2017 John Wiley & Sons Ltd.

A comparison of two closely-related approaches to aerodynamic design optimization

NASA Technical Reports Server (NTRS)

Shubin, G. R.; Frank, P. D.

1991-01-01

Two related methods for aerodynamic design optimization are compared. The methods, called the implicit gradient approach and the variational (or optimal control) approach, both attempt to obtain gradients necessary for numerical optimization at a cost significantly less than that of the usual black-box approach that employs finite difference gradients. While the two methods are seemingly quite different, they are shown to differ (essentially) in that the order of discretizing the continuous problem, and of applying calculus, is interchanged. Under certain circumstances, the two methods turn out to be identical. We explore the relationship between these methods by applying them to a model problem for duct flow that has many features in common with transonic flow over an airfoil. We find that the gradients computed by the variational method can sometimes be sufficiently inaccurate to cause the optimization to fail.

Linear elastic fracture mechanics primer

NASA Technical Reports Server (NTRS)

Wilson, Christopher D.

1992-01-01

This primer is intended to remove the blackbox perception of fracture mechanics computer software by structural engineers. The fundamental concepts of linear elastic fracture mechanics are presented with emphasis on the practical application of fracture mechanics to real problems. Numerous rules of thumb are provided. Recommended texts for additional reading, and a discussion of the significance of fracture mechanics in structural design are given. Griffith's criterion for crack extension, Irwin's elastic stress field near the crack tip, and the influence of small-scale plasticity are discussed. Common stress intensities factor solutions and methods for determining them are included. Fracture toughness and subcritical crack growth are discussed. The application of fracture mechanics to damage tolerance and fracture control is discussed. Several example problems and a practice set of problems are given.

An NAFP Project: Use of Object Oriented Methodologies and Design Patterns to Refactor Software Design

NASA Technical Reports Server (NTRS)

Shaykhian, Gholam Ali; Baggs, Rhoda

2007-01-01

In the early problem-solution era of software programming, functional decompositions were mainly used to design and implement software solutions. In functional decompositions, functions and data are introduced as two separate entities during the design phase, and are followed as such in the implementation phase. Functional decompositions make use of refactoring through optimizing the algorithms, grouping similar functionalities into common reusable functions, and using abstract representations of data where possible; all these are done during the implementation phase. This paper advocates the usage of object-oriented methodologies and design patterns as the centerpieces of refactoring software solutions. Refactoring software is a method of changing software design while explicitly preserving its external functionalities. The combined usage of object-oriented methodologies and design patterns to refactor should also benefit the overall software life cycle cost with improved software.

Value propositions of mHealth projects.

PubMed

Gorski, Irena; Bram, Joshua T; Sutermaster, Staci; Eckman, Molly; Mehta, Khanjan

While mHealth holds great potential for addressing global health disparities, a majority of the initiatives never proceed beyond the pilot stage. One fundamental concern is that mHealth projects are seldom designed from the customer's perspective to address their specific problems and/or create appreciable value. A customer-centric view, where direct tangible benefits of interventions are identified and communicated effectively, can drive customer engagement and advance projects toward self-sustaining business models. This article reviews the business models of 234 mHealth projects to identify nine distinct value propositions that solve specific problems for customers. Each of these value propositions is discussed with real-world examples, analyses of their design approaches and business strategies, and common enablers as well as hurdles to surviving past the pilot stage. Furthermore, a deeper analysis of 42 mHealth ventures that have achieved self-sustainability through project revenue provides a host of practical and poignant insights into the design of systems that can fulfil mHealth's promise to address healthcare challenges in the long term.

Multidisciplinary design optimization using genetic algorithms

NASA Technical Reports Server (NTRS)

Unal, Resit

1994-01-01

Multidisciplinary design optimization (MDO) is an important step in the conceptual design and evaluation of launch vehicles since it can have a significant impact on performance and life cycle cost. The objective is to search the system design space to determine values of design variables that optimize the performance characteristic subject to system constraints. Gradient-based optimization routines have been used extensively for aerospace design optimization. However, one limitation of gradient based optimizers is their need for gradient information. Therefore, design problems which include discrete variables can not be studied. Such problems are common in launch vehicle design. For example, the number of engines and material choices must be integer values or assume only a few discrete values. In this study, genetic algorithms are investigated as an approach to MDO problems involving discrete variables and discontinuous domains. Optimization by genetic algorithms (GA) uses a search procedure which is fundamentally different from those gradient based methods. Genetic algorithms seek to find good solutions in an efficient and timely manner rather than finding the best solution. GA are designed to mimic evolutionary selection. A population of candidate designs is evaluated at each iteration, and each individual's probability of reproduction (existence in the next generation) depends on its fitness value (related to the value of the objective function). Progress toward the optimum is achieved by the crossover and mutation operations. GA is attractive since it uses only objective function values in the search process, so gradient calculations are avoided. Hence, GA are able to deal with discrete variables. Studies report success in the use of GA for aircraft design optimization studies, trajectory analysis, space structure design and control systems design. In these studies reliable convergence was achieved, but the number of function evaluations was large compared with efficient gradient methods. Applicaiton of GA is underway for a cost optimization study for a launch-vehicle fuel-tank and structural design of a wing. The strengths and limitations of GA for launch vehicle design optimization is studied.

Dermoscopy for common skin problems in Chinese children using a novel Hong Kong-made dermoscope.

PubMed

Luk, David C K; Lam, Sam Y Y; Cheung, Patrick C H; Chan, Bill H B

2014-12-01

To evaluate the dermoscopic features of common skin problems in Chinese children. A case series with retrospective qualitative analysis of dermoscopic features of common skin problems in Chinese children. A regional hospital in Hong Kong. Dermoscopic image database, from 1 May 2013 to 31 October 2013, of 185 Chinese children (aged 0 to 18 years). Dermoscopic features of common paediatric skin problems in Chinese children were identified. These features corresponded with the known dermoscopic features reported in the western medical literature. New dermoscopic features were identified in café-au-lait macules. Dermoscopic features of common skin problems in Chinese children were consistent with those reported in western medical literature. Dermoscopy has a role in managing children with skin problems.

An overview of the genetic dissection of complex traits.

PubMed

Rao, D C

2008-01-01

Thanks to the recent revolutionary genomic advances such as the International HapMap consortium, resolution of the genetic architecture of common complex traits is beginning to look hopeful. While demonstrating the feasibility of genome-wide association (GWA) studies, the pathbreaking Wellcome Trust Case Control Consortium (WTCCC) study also serves to underscore the critical importance of very large sample sizes and draws attention to potential problems, which need to be addressed as part of the study design. Even the large WTCCC study had vastly inadequate power for several of the associations reported (and confirmed) and, therefore, most of the regions harboring relevant associations may not be identified anytime soon. This chapter provides an overview of some of the key developments in the methodological approaches to genetic dissection of common complex traits. Constrained Bayesian networks are suggested as especially useful for analysis of pathway-based SNPs. Likewise, composite likelihood is suggested as a promising method for modeling complex systems. It discusses the key steps in a study design, with an emphasis on GWA studies. Potential limitations highlighted by the WTCCC GWA study are discussed, including problems associated with massive genotype imputation, analysis of pooled national samples, shared controls, and the critical role of interactions. GWA studies clearly need massive sample sizes that are only possible through genuine collaborations. After all, for common complex traits, the question is not whether we can find some pieces of the puzzle, but how large and what kind of a sample we need to (nearly) solve the genetic puzzle.

An Arduino-based experiment designed to clarify the transition to total internal reflection

NASA Astrophysics Data System (ADS)

Atkin, Keith

2018-03-01

The topic of refraction and reflection of light at the boundary of transparent media is a fundamentally important one. The special case of total internal reflection is however commonly misrepresented in elementary textbooks. This paper addresses the problem and describes an experimental procedure for measuring and displaying reflected and transmitted light intensities using readily available components and the Arduino microcontroller.

Mid-Life and Career Transitions. The Career Life Assessment Skills Series, Booklet Six. A Program to Meet Adult Developmental Needs.

ERIC Educational Resources Information Center

Curtin, Bernadette M.; Hecklinger, Fred J.

Information and accompanying exercises in this four-part booklet are designed to assist adults make changes in their career and personal lives. After introductory material describing career and life planning as a continual assessment process, Part I of the booklet reviews the common characteristics and problems of adults in each of five life…

A Study of Family Nurse Practitioners: Perceived Competencies and Some of Their Implications for Nursing Education.

ERIC Educational Resources Information Center

Ward, Mary Jane Morrow

This study was designed to determine the most common health needs and problems that family nurse practitioners (FNP) deal with, to determine how competent FNPs judge themselves to be, to determine what sources in nursing education FNPs judge to be most valuable, and to determine whether or not there were significant differences in the level of…

All about Sex: The School Counselor's Guide to Handling Tough Adolescent Problems. Practical Skills for Counselors Series.

ERIC Educational Resources Information Center

Bradley, Loretta J.; Jarchow, Elaine; Robinson, Beth

This book is designed to be used by school counselors to help them respond to sexual issues of adolescence. Chapter 1, "Sexual Stuff: What's a Counselor To Do?" introduces the topic of knowing the boundaries of school policy, parents, values and religion, and confidentiality. A series of case studies are presented and answers common concerns…

A Method for Measuring Fishing Effort by Small-Scale Fish Aggregating Device (FAD) Fishers from the Commonwealth of Dominica

ERIC Educational Resources Information Center

Alvard, Michael; McGaffey, Ethan; Carlson, David

2015-01-01

We used global positioning system (GPS) technology and tracking analysis to measure fishing effort by marine, small-scale, fish aggregating device (FAD) fishers of the Commonwealth of Dominica. FADs are human-made structures designed to float on the surface of the water and attract fish. They are also prone to common pool resource problems. To…

Application of Function-Failure Similarity Method to Rotorcraft Component Design

NASA Technical Reports Server (NTRS)

Roberts, Rory A.; Stone, Robert E.; Tumer, Irem Y.; Clancy, Daniel (Technical Monitor)

2002-01-01

Performance and safety are the top concerns of high-risk aerospace applications at NASA. Eliminating or reducing performance and safety problems can be achieved with a thorough understanding of potential failure modes in the designs that lead to these problems. The majority of techniques use prior knowledge and experience as well as Failure Modes and Effects as methods to determine potential failure modes of aircraft. During the design of aircraft, a general technique is needed to ensure that every potential failure mode is considered, while avoiding spending time on improbable failure modes. In this work, this is accomplished by mapping failure modes to specific components, which are described by their functionality. The failure modes are then linked to the basic functions that are carried within the components of the aircraft. Using this technique, designers can examine the basic functions, and select appropriate analyses to eliminate or design out the potential failure modes. The fundamentals of this method were previously introduced for a simple rotating machine test rig with basic functions that are common to a rotorcraft. In this paper, this technique is applied to the engine and power train of a rotorcraft, using failures and functions obtained from accident reports and engineering drawings.

Design considerations and challenges for mechanical stretch bioreactors in tissue engineering.

PubMed

Lei, Ying; Ferdous, Zannatul

2016-05-01

With the increase in average life expectancy and growing aging population, lack of functional grafts for replacement surgeries has become a severe problem. Engineered tissues are a promising alternative to this problem because they can mimic the physiological function of the native tissues and be cultured on demand. Cyclic stretch is important for developing many engineered tissues such as hearts, heart valves, muscles, and bones. Thus a variety of stretch bioreactors and corresponding scaffolds have been designed and tested to study the underlying mechanism of tissue formation and to optimize the mechanical conditions applied to the engineered tissues. In this review, we look at various designs of stretch bioreactors and common scaffolds and offer insights for future improvements in tissue engineering applications. First, we summarize the requirements and common configuration of stretch bioreactors. Next, we present the features of different actuating and motion transforming systems and their applications. Since most bioreactors must measure detailed distributions of loads and deformations on engineered tissues, techniques with high accuracy, precision, and frequency have been developed. We also cover the key points in designing culture chambers, nutrition exchanging systems, and regimens used for specific tissues. Since scaffolds are essential for providing biophysical microenvironments for residing cells, we discuss materials and technologies used in fabricating scaffolds to mimic anisotropic native tissues, including decellularized tissues, hydrogels, biocompatible polymers, electrospinning, and 3D bioprinting techniques. Finally, we present the potential future directions for improving stretch bioreactors and scaffolds. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:543-553, 2016. © 2016 American Institute of Chemical Engineers.

Childhood conduct disorder trajectories, prior risk factors and cannabis use at age 16: birth cohort study

PubMed Central

Heron, Jon; Barker, Edward D; Joinson, Carol; Lewis, Glyn; Hickman, Matthew; Munafò, Marcus; Macleod, John

2013-01-01

AimsTo investigate the prevalence of cannabis use and problem use in boys and girls at age 16 years, and to investigate the role of adversity in early life and of conduct disorder between the ages of 4 and 13 years as risk factors for these outcomes. DesignBirth cohort study. SettingEngland. ParticipantsA total of 4159 (2393 girls) participants in the Avon Longitudinal Study of Parents and Children (ALSPAC) birth cohort providing information on cannabis use at age 16. MeasurementsCannabis use and problem cannabis use at age 16 were assessed by postal questionnaire. Material adversity, maternal substance use, maternal mental health and child conduct disorder were all assessed by maternal report. FindingsCannabis use was more common among girls than boys (21.4% versus 18.3%, P = 0.005). Problem cannabis use was more common in boys than girls (3.6% versus 2.8%, P = 0.007). Early-onset persistent conduct problems were associated strongly with problem cannabis use [odds ratio (OR) = 6.46, 95% confidence interval (CI) = 4.06–10.28]. Residence in subsidized housing (OR = 3.10, 95% CI = 1.95, 4.92); maternal cannabis use (OR 8.84, 95% CI 5.64–13.9) and any maternal smoking in the postnatal period (OR = 2.69, 95% CI = 1.90–3.81) all predicted problem cannabis use. Attributable risks for adolescent problem cannabis use associated with the above factors were 25, 13, 17 and 24%, respectively. ConclusionsMaternal smoking and cannabis use, early material disadvantage and early-onset persistent conduct problems are important risk factors for adolescent problem cannabis use. This may have implications for prevention. PMID:23734913

Parental divorce in late adolescence does not seem to increase mental health problems: a population study from Norway

PubMed Central

2013-01-01

Background Former studies have shown increased mental health problems in adolescents after parental divorce all over the Western world. We wanted to see if that still is the case in Norway today when divorce turns to be more and more common. Methods In a prospective study design, two samples were constituted, adolescents at a baseline survey in 2001/02 (n = 2422) and those at follow-up in 2003/04 (n = 1861), when the adolescents were 15/16 and 18/19 years-old, respectively. They answered self-administered questionnaires in both surveys of Young-HUBRO in Oslo. Early parental divorce was defined as that which occured before age 15/16 years, and late divorce occured between age 15/16 and 18/19. Internalized and externalized mental health problems were measured by the Hopkin’s Symptom Check List (HSCL-10) and the Strengths and Difficulties Questionnaire (SDQ). Results After linear regression models were adjusted for gender, ethnicity, family economy, social support, and mental health problem symptoms measured at baseline before parental divorce occured, late parental divorce did not lead to significant increase in mental health problems among adolescents in the city of Oslo. Early parental divorce was associated with internal mental health problems among young adolescents when adjusted only for the first four possible confounders. Conclusions It seems that parental divorce in late adolescence does not lead to mental health problems in Norway any more, as has been shown before, while such problems may prevail among young adolescents. This does not mean that parental divorce create less problems in late adolescence than before but these youths might have developed adjustment abilities against health effects as divorce have turned to be more common. PMID:23631712

Parental divorce in late adolescence does not seem to increase mental health problems: a population study from Norway.

PubMed

Zeratsion, Henok; Dalsklev, Madeleine; Bjertness, Espen; Lien, Lars; Haavet, Ole R; Halvorsen, Jon A; Bjertness, Cecilie B; Claussen, Bjørgulf

2013-04-30

Former studies have shown increased mental health problems in adolescents after parental divorce all over the Western world. We wanted to see if that still is the case in Norway today when divorce turns to be more and more common. In a prospective study design, two samples were constituted, adolescents at a baseline survey in 2001/02 (n = 2422) and those at follow-up in 2003/04 (n = 1861), when the adolescents were 15/16 and 18/19 years-old, respectively. They answered self-administered questionnaires in both surveys of Young-HUBRO in Oslo. Early parental divorce was defined as that which occured before age 15/16 years, and late divorce occured between age 15/16 and 18/19. Internalized and externalized mental health problems were measured by the Hopkin's Symptom Check List (HSCL-10) and the Strengths and Difficulties Questionnaire (SDQ). After linear regression models were adjusted for gender, ethnicity, family economy, social support, and mental health problem symptoms measured at baseline before parental divorce occured, late parental divorce did not lead to significant increase in mental health problems among adolescents in the city of Oslo. Early parental divorce was associated with internal mental health problems among young adolescents when adjusted only for the first four possible confounders. It seems that parental divorce in late adolescence does not lead to mental health problems in Norway any more, as has been shown before, while such problems may prevail among young adolescents. This does not mean that parental divorce create less problems in late adolescence than before but these youths might have developed adjustment abilities against health effects as divorce have turned to be more common.

On the suitability of different representations of solid catalysts for combinatorial library design by genetic algorithms.

PubMed

Gobin, Oliver C; Schüth, Ferdi

2008-01-01

Genetic algorithms are widely used to solve and optimize combinatorial problems and are more often applied for library design in combinatorial chemistry. Because of their flexibility, however, their implementation can be challenging. In this study, the influence of the representation of solid catalysts on the performance of genetic algorithms was systematically investigated on the basis of a new, constrained, multiobjective, combinatorial test problem with properties common to problems in combinatorial materials science. Constraints were satisfied by penalty functions, repair algorithms, or special representations. The tests were performed using three state-of-the-art evolutionary multiobjective algorithms by performing 100 optimization runs for each algorithm and test case. Experimental data obtained during the optimization of a noble metal-free solid catalyst system active in the selective catalytic reduction of nitric oxide with propene was used to build up a predictive model to validate the results of the theoretical test problem. A significant influence of the representation on the optimization performance was observed. Binary encodings were found to be the preferred encoding in most of the cases, and depending on the experimental test unit, repair algorithms or penalty functions performed best.

Multiobjective Multifactorial Optimization in Evolutionary Multitasking.

PubMed

Gupta, Abhishek; Ong, Yew-Soon; Feng, Liang; Tan, Kay Chen

2016-05-03

In recent decades, the field of multiobjective optimization has attracted considerable interest among evolutionary computation researchers. One of the main features that makes evolutionary methods particularly appealing for multiobjective problems is the implicit parallelism offered by a population, which enables simultaneous convergence toward the entire Pareto front. While a plethora of related algorithms have been proposed till date, a common attribute among them is that they focus on efficiently solving only a single optimization problem at a time. Despite the known power of implicit parallelism, seldom has an attempt been made to multitask, i.e., to solve multiple optimization problems simultaneously. It is contended that the notion of evolutionary multitasking leads to the possibility of automated transfer of information across different optimization exercises that may share underlying similarities, thereby facilitating improved convergence characteristics. In particular, the potential for automated transfer is deemed invaluable from the standpoint of engineering design exercises where manual knowledge adaptation and reuse are routine. Accordingly, in this paper, we present a realization of the evolutionary multitasking paradigm within the domain of multiobjective optimization. The efficacy of the associated evolutionary algorithm is demonstrated on some benchmark test functions as well as on a real-world manufacturing process design problem from the composites industry.

Warm Parenting and Effortful Control in Toddlerhood: Independent and Interactive Predictors of School-Age Externalizing Behavior.

PubMed

Reuben, Julia D; Shaw, Daniel S; Neiderhiser, Jenae M; Natsuaki, Misaki N; Reiss, David; Leve, Leslie D

2016-08-01

Externalizing symptoms, such as aggression, impulsivity, and inattention, represent the most common forms of childhood maladjustment (Campbell et al. Development and Psychopathology, 12, 467-488, 2000). Several dimensions of parenting behavior, including overreactive and warm parenting, have been linked to children's conduct problems. However, the majority of these studies involve biologically-related family members, thereby limiting understanding of the role of genetic and/or environmental underpinnings of parenting on child psychopathology. This study extends previous research by exploring associations between overreactive and warm parenting during toddlerhood and school-age externalizing problems, as well as the potential moderating effects of child effortful control (EC) on such associations using a longitudinal adoption design. The sample consisted of 225 adoption-linked families (adoptive parents, adopted child [124 male and 101 female] and birth parent[s]), thereby allowing for a more precise estimate of environmental influences on the association between parenting and child externalizing problems. Adoptive mothers' warm parenting at 27 months predicted lower levels of child externalizing problems at ages 6 and 7. Child EC moderated this association in relation to teacher reports of school-age externalizing problems. Findings corroborate prior research with biological families that was not designed to unpack genetic and environmental influences on associations between parenting and child externalizing problems during childhood, highlighting the important role of parental warmth as an environmental influence.

Warm Parenting and Effortful Control in Toddlerhood: Independent and Interactive Predictors of School-Age Externalizing Behavior

PubMed Central

Reuben, Julia D.; Shaw, Daniel S.; Neiderhiser, Jenae M.; Natsuaki, Misaki N.; Reiss, David; Leve, Leslie D.

2016-01-01

Externalizing symptoms, such as aggression, impulsivity, and inattention, represent the most common forms of childhood maladjustment (Campbell, Shaw, & Gilliom, 2000). Several dimensions of parenting behavior, including overreactive and warm parenting, have been linked to children’s conduct problems. However, the majority of these studies involve biologically-related family members, thereby limiting understanding of the role of genetic and/or environmental underpinnings of parenting on child psychopathology. This study extends previous research by exploring associations between overreactive and warm parenting during toddlerhood and school-age externalizing problems, as well as the potential moderating effects of child effortful control (EC) on such associations using a longitudinal adoption design. The sample consisted of 225 adoption-linked families (adoptive parents, adopted child [124 male and 101 female] and birth parent[s]), thereby allowing for a more precise estimate of environmental influences on the association between parenting and child externalizing problems. Adoptive mothers’ warm parenting at 27 months predicted lower levels of child externalizing problems at ages 6 and 7. Child EC moderated this association in relation to teacher reports of school-age externalizing problems. Findings corroborate prior research with biological families that was not designed to unpack genetic and environmental influences on associations between parenting and child externalizing problems during childhood, highlighting the important role of parental warmth as an environmental influence. PMID:26496906

Facade renovation - replacement and restoration of the panels in a monument protected object

NASA Astrophysics Data System (ADS)

Novotný, Michal

2017-12-01

The article deals with problems of reconstruction of the facade and the associated problem of replacement or repair of the panels. In conventional buildings it is a smooth operation, but it is problematic in monument-protected objects. In the case of a common building, it is possible to choose any modern panels and simply replace them, but for historical objects we have to follow the claims and the rules of monument protection. In practice, it usually means the impossibility of use of modern panels, but at least a combination of old and modern technologies. Another possible solution to the problem is renovation, or repairs to the original state of the existing panels, of course with respect to the functionality of such panels. The implementation of such repairs must always be based on the technical and historical survey of the condition of the object and the repairs must be professionally designed. Subsequently, corrections are made, during which it is necessary to pay particular attention to observance of the technological procedures, rules and instructions particularly in terms of monument protection. However, the functionality of the works or elements made with regard to the quality of the environment within the building is not negligible. A common problem is the lack of control of technical requirements and functional requirements. Underestimation of the problems then leads to difficult repairs. The article points to the mistakes and problems of one such construction project on a historically protected chateau building.

A method and knowledge base for automated inference of patient problems from structured data in an electronic medical record

PubMed Central

Pang, Justine; Feblowitz, Joshua C; Maloney, Francine L; Wilcox, Allison R; Ramelson, Harley Z; Schneider, Louise I; Bates, David W

2011-01-01

Background Accurate knowledge of a patient's medical problems is critical for clinical decision making, quality measurement, research, billing and clinical decision support. Common structured sources of problem information include the patient problem list and billing data; however, these sources are often inaccurate or incomplete. Objective To develop and validate methods of automatically inferring patient problems from clinical and billing data, and to provide a knowledge base for inferring problems. Study design and methods We identified 17 target conditions and designed and validated a set of rules for identifying patient problems based on medications, laboratory results, billing codes, and vital signs. A panel of physicians provided input on a preliminary set of rules. Based on this input, we tested candidate rules on a sample of 100 000 patient records to assess their performance compared to gold standard manual chart review. The physician panel selected a final rule for each condition, which was validated on an independent sample of 100 000 records to assess its accuracy. Results Seventeen rules were developed for inferring patient problems. Analysis using a validation set of 100 000 randomly selected patients showed high sensitivity (range: 62.8–100.0%) and positive predictive value (range: 79.8–99.6%) for most rules. Overall, the inference rules performed better than using either the problem list or billing data alone. Conclusion We developed and validated a set of rules for inferring patient problems. These rules have a variety of applications, including clinical decision support, care improvement, augmentation of the problem list, and identification of patients for research cohorts. PMID:21613643

Divertor target shape optimization in realistic edge plasma geometry

NASA Astrophysics Data System (ADS)

Dekeyser, W.; Reiter, D.; Baelmans, M.

2014-07-01

Tokamak divertor design for next-step fusion reactors heavily relies on numerical simulations of the plasma edge. Currently, the design process is mainly done in a forward approach, where the designer is strongly guided by his experience and physical intuition in proposing divertor shapes, which are then thoroughly assessed by numerical computations. On the other hand, automated design methods based on optimization have proven very successful in the related field of aerodynamic design. By recasting design objectives and constraints into the framework of a mathematical optimization problem, efficient forward-adjoint based algorithms can be used to automatically compute the divertor shape which performs the best with respect to the selected edge plasma model and design criteria. In the past years, we have extended these methods to automated divertor target shape design, using somewhat simplified edge plasma models and geometries. In this paper, we build on and extend previous work to apply these shape optimization methods for the first time in more realistic, single null edge plasma and divertor geometry, as commonly used in current divertor design studies. In a case study with JET-like parameters, we show that the so-called one-shot method is very effective is solving divertor target design problems. Furthermore, by detailed shape sensitivity analysis we demonstrate that the development of the method already at the present state provides physically plausible trends, allowing to achieve a divertor design with an almost perfectly uniform power load for our particular choice of edge plasma model and design criteria.

Assessing trail conditions in protected areas: Application of a problem-assessment method in Great Smoky Mountains National Park, USA

USGS Publications Warehouse

Leung, Y.-F.; Marion, J.

1999-01-01

The degradation of trail resources associated with expanding recreation and tourism visitation is a growing management problem in protected areas worldwide. In order to make judicious trail and visitor management decisions, protected area managers need objective and timely information on trail resource conditions. This paper introduces a trail survey method that efficiently characterizes the lineal extent of common trail problems. The method was applied to a large sample of trails within Great Smoky Mountains National Park, a highuse protected area in the USA. The Trail ProblemAssessment Method (TPAM) employs a continuous search for multiple indicators of predefined tread problems, yielding census data documenting the location, occurrence and extent of each problem. The present application employed 23 different indicators in three categories to gather inventory, resource condition, and design and maintenance data of each surveyed trail. Seventy-two backcountry hiking trails (528 km), or 35% of the Park's total trail length, were surveyed. Soil erosion and wet soil were found to be the two most common impacts on a lineal extent basis. Trails with serious tread problems were well distributed throughout the Park, although wet muddy treads tended to be concentrated in areas where horse use was high. The effectiveness of maintenance features installed to divert water from trail treads was also evaluated. Water bars were found to be more effective than drainage dips. The TPAM was able to provide Park managers with objective and quantitative information for use in trail planning, management and maintenance decisions, and is applicable to other protected areas elsewhere with different environmental and impact characteristics.

Curriculum renewal in child psychiatry.

PubMed

Hanson, M; Tiberius, R; Charach, A; Ulzen, T; Sackin, D; Jain, U; Reiter, S; Shomair, G

1999-11-01

To ensure uniform design and evaluation of a clerkship curriculum for child and adolescent psychiatry teaching common disorders and problems in an efficient manner across 5 teaching sites and to include structures for continuous improvement. The curriculum committee selected for course inclusion disorders and problems of child psychiatry that were commonly encountered by primary care physicians. Instruction methods that encouraged active student learning were selected. Course coordination across sites was encouraged by several methods: involving faculty, adopting a centralized examination format, and aligning teaching methods with examination format. Quantitative and qualitative methods were used to measure students' perceptions of the course's value. These evaluative results were reviewed, and course modifications were implemented and reevaluated. The average adjusted student return rate for course evaluation questionnaires for the 3-year study period was 63%. Clerks' ratings of course learning value demonstrated that the course improved significantly and continually across all sites, according to a Scheffé post-hoc analysis. Analysis of student statements from focus-group transcripts contributed to course modifications, such as the Brief Focused Interview (BFI). Our curriculum in child psychiatry, which focused on common problems and used active learning methods, was viewed as a valuable learning experience by clinical clerks. Curriculum coordination across multiple teaching sites was accomplished by including faculty in the process and by using specific teaching and examination strategies. Structures for continuous course improvement were effective.

Geometrical specifications accuracy influence on the quality of electromechanical devices

NASA Astrophysics Data System (ADS)

Glukhov, V. I.; Lakeenko, M. N.; Dolzhikov, S. N.

2017-06-01

To improve the quality of electromechanical products is possible due to the geometrical specifications optimization of values and tolerances. Electromechanical products longevity designates the rolling-contact bearings of the armature shaft. Longevity of the rolling-contact bearings is less than designed one, since assembly and fitting alter gaps, sizes and geometric tolerances for the working parts of the basic rolling bearing details. Geometrical models of the rolling-contact bearing details for the armature shaft and the end shield are developed on the basis of an electric locomotive traction motor in the present work. The basic elements of the details conjugating with the adjacent details and materializing the generalized and auxiliary coordinate systems are determined. Function, informativeness and the number of geometrical specifications for the elements location are specified. The recommendations on amending the design documentation due to geometrical models to improve the accuracy and the quality of the products are developed: the replacement of the common axis of the shaft’s technological datums by the common axis of the basic design datums; coaxiality tolerances for these design datums with respect to their common axis; the modifiers for these auxiliary datums and these datums location tolerances according to the principles of datums uniformity, inversion and the shortest dimension chains. The investigation demonstrated that the problem of enhancing the durability, longevity, and efficiency coefficient for electromechanical products can be solved with the systematic normalizations of geometrical specifications accuracy on the basis of the coordinate systems introduced in the standards on geometrical product specifications (GPS).

Structure-Based Design of Functional Amyloid Materials

DOE PAGES

Li, Dan; Jones, Eric M.; Sawaya, Michael R.; ...

2014-12-04

We report that amyloid fibers, once exclusively associated with disease, are acquiring utility as a class of biological nanomaterials. We introduce a method that utilizes the atomic structures of amyloid peptides, to design materials with versatile applications. As a model application, we designed amyloid fibers capable of capturing carbon dioxide from flue gas, to address the global problem of excess anthropogenic carbon dioxide. By measuring dynamic separation of carbon dioxide from nitrogen, we show that fibers with designed amino acid sequences double the carbon dioxide binding capacity of the previously reported fiber formed by VQIVYK from Tau protein. In amore » second application, we designed fibers that facilitate retroviral gene transfer. Finally, by measuring lentiviral transduction, we show that designed fibers exceed the efficiency of polybrene, a commonly used enhancer of transduction. The same procedures can be adapted to the design of countless other amyloid materials with a variety of properties and uses.« less

Use of human engineering standards in design

NASA Technical Reports Server (NTRS)

Rogers, J. G.; Armstrong, R.

1977-01-01

Results are presented for a research study intended to assess the impact of present human engineering standards on product design. The approach consisted of three basic steps: a comparison of two display panels to determine if, in fact, products designed to the same standards are truly standardized; a review of two existing standards to determine how well their information can be used to solve design problems; and a survey of human factors specialists to assess their opinions about standards. It is shown that standards have less than the desired influence on product design. This is evidenced by a lack of standardization between hardware designed under common standards, by deficiencies within the standards that detract from their usefulness and encourage users to ignore them, and by the respondents of the survey who consider standards less valuable than other reference sources for design implementation. Recommendations aimed at enhancing the use of standards are set forth.

The indoor air we breathe.

PubMed Central

Oliver, L C; Shackleton, B W

1998-01-01

Increasingly recognized as a potential public health problem since the outbreak of Legionnaire's disease in Philadelphia in 1976, polluted indoor air has been associated with health problems that include asthma, sick building syndrome, multiple chemical sensitivity, and hypersensitivity pneumonitis. Symptoms are often nonspecific and include headache, eye and throat irritation, chest tightness and shortness of breath, and fatigue. Air-borne contaminants include commonly used chemicals, vehicular exhaust, microbial organisms, fibrous glass particles, and dust. Identified causes include defective building design and construction, aging of buildings and their ventilation systems, poor climate control, inattention to building maintenance. A major contributory factor is the explosion in the use of chemicals in building construction and furnishing materials over the past four decades. Organizational issues and psychological variables often contribute to the problem and hinder its resolution. This article describes the health problems related to poor indoor air quality and offers solutions. Images p398-a p399-a PMID:9769764

The Apollo Expericence Lessons Learned for Constellation Lunar Dust Management

NASA Astrophysics Data System (ADS)

Wagner, Sandra

2006-09-01

Lunar dust will present significant challenges to NASA's Lunar Exploration Missions. The challenges can be overcome by using best practices in system engineering design. For successful lunar surface missions, all systems that come into contact with lunar dust must consider the effects throughout the entire design process. Interfaces between all these systems with other systems also must be considered. Incorporating dust management into Concept of Operations and Requirements development are the best place to begin to mitigate the risks presented by lunar dust. However, that is only the beginning. To be successful, every person who works on NASA's Constellation lunar missions must be mindful of this problem. Success will also require fiscal responsibility. NASA must learn from Apollo the root cause of problems caused by dust, and then find the most cost-effective solutions to address each challenge. This will require a combination of common sense existing technologies and promising, innovative technical solutions

Optimal Shakedown of the Thin-Wall Metal Structures Under Strength and Stiffness Constraints

NASA Astrophysics Data System (ADS)

Alawdin, Piotr; Liepa, Liudas

2017-06-01

Classical optimization problems of metal structures confined mainly with 1st class cross-sections. But in practice it is common to use the cross-sections of higher classes. In this paper, a new mathematical model for described shakedown optimization problem for metal structures, which elements are designed from 1st to 4th class cross-sections, under variable quasi-static loads is presented. The features of limited plastic redistribution of forces in the structure with thin-walled elements there are taken into account. Authors assume the elastic-plastic flexural buckling in one plane without lateral torsional buckling behavior of members. Design formulae for Methods 1 and 2 for members are analyzed. Structures stiffness constrains are also incorporated in order to satisfy the limit serviceability state requirements. With the help of mathematical programming theory and extreme principles the structure optimization algorithm is developed and justified with the numerical experiment for the metal plane frames.

Decentralized Feedback Controllers for Exponential Stabilization of Hybrid Periodic Orbits: Application to Robotic Walking.

PubMed

Hamed, Kaveh Akbari; Gregg, Robert D

2016-07-01

This paper presents a systematic algorithm to design time-invariant decentralized feedback controllers to exponentially stabilize periodic orbits for a class of hybrid dynamical systems arising from bipedal walking. The algorithm assumes a class of parameterized and nonlinear decentralized feedback controllers which coordinate lower-dimensional hybrid subsystems based on a common phasing variable. The exponential stabilization problem is translated into an iterative sequence of optimization problems involving bilinear and linear matrix inequalities, which can be easily solved with available software packages. A set of sufficient conditions for the convergence of the iterative algorithm to a stabilizing decentralized feedback control solution is presented. The power of the algorithm is demonstrated by designing a set of local nonlinear controllers that cooperatively produce stable walking for a 3D autonomous biped with 9 degrees of freedom, 3 degrees of underactuation, and a decentralization scheme motivated by amputee locomotion with a transpelvic prosthetic leg.

Decentralized Feedback Controllers for Robust Stabilization of Periodic Orbits of Hybrid Systems: Application to Bipedal Walking.

PubMed

Hamed, Kaveh Akbari; Gregg, Robert D

2017-07-01

This paper presents a systematic algorithm to design time-invariant decentralized feedback controllers to exponentially and robustly stabilize periodic orbits for hybrid dynamical systems against possible uncertainties in discrete-time phases. The algorithm assumes a family of parameterized and decentralized nonlinear controllers to coordinate interconnected hybrid subsystems based on a common phasing variable. The exponential and [Formula: see text] robust stabilization problems of periodic orbits are translated into an iterative sequence of optimization problems involving bilinear and linear matrix inequalities. By investigating the properties of the Poincaré map, some sufficient conditions for the convergence of the iterative algorithm are presented. The power of the algorithm is finally demonstrated through designing a set of robust stabilizing local nonlinear controllers for walking of an underactuated 3D autonomous bipedal robot with 9 degrees of freedom, impact model uncertainties, and a decentralization scheme motivated by amputee locomotion with a transpelvic prosthetic leg.

The Apollo Experience Lessons Learned for Constellation Lunar Dust Management

NASA Technical Reports Server (NTRS)

Wagner, Sandra

2006-01-01

Lunar dust will present significant challenges to NASA's Lunar Exploration Missions. The challenges can be overcome by using best practices in system engineering design. For successful lunar surface missions, all systems that come into contact with lunar dust must consider the effects throughout the entire design process. Interfaces between all these systems with other systems also must be considered. Incorporating dust management into Concept of Operations and Requirements development are the best place to begin to mitigate the risks presented by lunar dust. However, that is only the beginning. To be successful, every person who works on NASA's Constellation lunar missions must be mindful of this problem. Success will also require fiscal responsibility. NASA must learn from Apollo the root cause of problems caused by dust, and then find the most cost-effective solutions to address each challenge. This will require a combination of common sense existing technologies and promising, innovative technical solutions

Decentralized Feedback Controllers for Exponential Stabilization of Hybrid Periodic Orbits: Application to Robotic Walking*

PubMed Central

Hamed, Kaveh Akbari; Gregg, Robert D.

2016-01-01

This paper presents a systematic algorithm to design time-invariant decentralized feedback controllers to exponentially stabilize periodic orbits for a class of hybrid dynamical systems arising from bipedal walking. The algorithm assumes a class of parameterized and nonlinear decentralized feedback controllers which coordinate lower-dimensional hybrid subsystems based on a common phasing variable. The exponential stabilization problem is translated into an iterative sequence of optimization problems involving bilinear and linear matrix inequalities, which can be easily solved with available software packages. A set of sufficient conditions for the convergence of the iterative algorithm to a stabilizing decentralized feedback control solution is presented. The power of the algorithm is demonstrated by designing a set of local nonlinear controllers that cooperatively produce stable walking for a 3D autonomous biped with 9 degrees of freedom, 3 degrees of underactuation, and a decentralization scheme motivated by amputee locomotion with a transpelvic prosthetic leg. PMID:27990059

Decentralized Feedback Controllers for Robust Stabilization of Periodic Orbits of Hybrid Systems: Application to Bipedal Walking

PubMed Central

Hamed, Kaveh Akbari; Gregg, Robert D.

2016-01-01

This paper presents a systematic algorithm to design time-invariant decentralized feedback controllers to exponentially and robustly stabilize periodic orbits for hybrid dynamical systems against possible uncertainties in discrete-time phases. The algorithm assumes a family of parameterized and decentralized nonlinear controllers to coordinate interconnected hybrid subsystems based on a common phasing variable. The exponential and H2 robust stabilization problems of periodic orbits are translated into an iterative sequence of optimization problems involving bilinear and linear matrix inequalities. By investigating the properties of the Poincaré map, some sufficient conditions for the convergence of the iterative algorithm are presented. The power of the algorithm is finally demonstrated through designing a set of robust stabilizing local nonlinear controllers for walking of an underactuated 3D autonomous bipedal robot with 9 degrees of freedom, impact model uncertainties, and a decentralization scheme motivated by amputee locomotion with a transpelvic prosthetic leg. PMID:28959117

Design And Implementation Of PID Controller Using Relay Feedback On TRMS (Twin Rotor MIMO System)

NASA Astrophysics Data System (ADS)

Shah, Dipesh H.

2011-12-01

Today, many process control problems can be adequately and routinely solved by conventional PID control strategies. The overriding reason that the PID controller is so widely accepted is its simple structure which has proved to be very robust with regard to many commonly met process control problems as for instance disturbances and nonlinearities. Relay feedback methods have been widely used in tuning proportional-integral-derivative controllers due to its closed loop nature. In this work, Relay based PID controller is designed and successfully implemented on TRMS (Twin Rotor MIMO System) in SISO and MIMO configurations. The performance of a Relay based PID controller for control of TRMS is investigated and performed satisfactorily. The system shares some features with a helicopter, such as important interactions between the vertical and horizontal motions. The RTWT toolbox in the MATLAB environment is used to perform real-time experiments.

Core curricula for postdoctoral dental students: recent problems, potential solutions, and a model for the future.

PubMed

Iacopino, Anthony M; Taft, Thomas B

2007-11-01

Development of common core curricula for the graduate advanced education/specialty programs in dental schools presents significant challenges. Similarities in graduate education accreditation standards justify such an approach, yet a core curriculum is difficult to achieve for a variety of reasons including scheduling constraints and the capacity of a common, single pathway curriculum to address the specific educational needs of postgraduate students in different disciplines. Additionally, many dental schools are experiencing severe shortages of qualified faculty to provide graduate program instruction. There are no previous reports regarding graduate core curricula and the definition/delivery of such core curricula in advanced education programs in dentistry although there are several reports in the medical literature that support the educational value of a unified core curriculum implemented in a modular format. Graduate curricula are typically designed to provide residents with advanced education/training beyond what is acquired during their predoctoral dental school experience. Advanced education programs must emphasize knowledge and skills that are discipline-specific; however, there is a large amount of common foundational material within the early phases of these programs. Dental schools have attempted to identify and present this common material within the context of an organized shared set of courses/seminars where residents from each advanced education program are scheduled simultaneously. However, there have been problems with the implementation of a shared core curricula including the following: 1) dissimilar educational backgrounds/abilities among residents; 2) relevance of material to all residents; 3) lack of central management; 4) scheduling conflicts; and 5) lack of adequate and consistent program evaluation. In an attempt to resolve these problems, a new comprehensive graduate core curriculum was implemented at the Marquette University School of Dentistry in 2000. This core curriculum was designed to 1) be user-friendly; 2) allow flexibility; 3) meet specific programmatic/accreditation needs for each advanced education program; and 4) provide assessment tools for continuous resident feedback and curriculum improvement. Assessment data obtained from residents, faculty, and program directors indicate that this approach has been successful and has transformed graduate education at Marquette. Thus, this model may prove useful for other institutions seeking to refine or develop graduate core curricula.

The Parable of the Boiled Safety Professional

NASA Technical Reports Server (NTRS)

Shivers, Charles H.

2011-01-01

Common and unique issues contribute to system failures. This paper touches on the concept of drift to failure as a cautionary message. Managers and leaders, design team members, fabricators and assemblers, analysis and assurance personnel, and others associated with operating and maintaining systems, need to pay attention to identify the manifestation of individual and collective behaviors that might indicate slips in rigor or focus or decisions that might eat away at safety margins as our system drifts to failure. Corrections to drift made during design and development phases may efficiently prevent or mitigate drift problems occurring in the operational phase.

Evaluating student discipline practices in a public school through behavioral assessment of office referrals.

PubMed

Putnam, Robert F; Luiselli, James K; Handler, Marcie W; Jefferson, Gretchen L

2003-09-01

Office discipline referrals are a common practice in public schools to address students' problem behaviors. The authors report two descriptive studies in a public elementary-middle school to illustrate frequency of office referrals as an evaluative data source. Study I was a behavioral assessment of office referrals to determine the types of discipline problems confronting school personnel and the distribution of referrals among teachers, students, and grade level. In Study II, a fifth-grade class that had the most office referrals in the school received whole-class and individual-student interventions that produced a decrease in the number of referrals. These findings support use of office referrals as a readily available index by which to identify school discipline problems, design interventions, and evaluate outcome.

Quantitative knowledge acquisition for expert systems

NASA Technical Reports Server (NTRS)

Belkin, Brenda L.; Stengel, Robert F.

1991-01-01

A common problem in the design of expert systems is the definition of rules from data obtained in system operation or simulation. While it is relatively easy to collect data and to log the comments of human operators engaged in experiments, generalizing such information to a set of rules has not previously been a direct task. A statistical method is presented for generating rule bases from numerical data, motivated by an example based on aircraft navigation with multiple sensors. The specific objective is to design an expert system that selects a satisfactory suite of measurements from a dissimilar, redundant set, given an arbitrary navigation geometry and possible sensor failures. The systematic development is described of a Navigation Sensor Management (NSM) Expert System from Kalman Filter convariance data. The method invokes two statistical techniques: Analysis of Variance (ANOVA) and the ID3 Algorithm. The ANOVA technique indicates whether variations of problem parameters give statistically different covariance results, and the ID3 algorithms identifies the relationships between the problem parameters using probabilistic knowledge extracted from a simulation example set. Both are detailed.

Acoustic noise and functional magnetic resonance imaging: current strategies and future prospects.

PubMed

Amaro, Edson; Williams, Steve C R; Shergill, Sukhi S; Fu, Cynthia H Y; MacSweeney, Mairead; Picchioni, Marco M; Brammer, Michael J; McGuire, Philip K

2002-11-01

Functional magnetic resonance imaging (fMRI) has become the method of choice for studying the neural correlates of cognitive tasks. Nevertheless, the scanner produces acoustic noise during the image acquisition process, which is a problem in the study of auditory pathway and language generally. The scanner acoustic noise not only produces activation in brain regions involved in auditory processing, but also interferes with the stimulus presentation. Several strategies can be used to address this problem, including modifications of hardware and software. Although reduction of the source of the acoustic noise would be ideal, substantial hardware modifications to the current base of installed MRI systems would be required. Therefore, the most common strategy employed to minimize the problem involves software modifications. In this work we consider three main types of acquisitions: compressed, partially silent, and silent. For each implementation, paradigms using block and event-related designs are assessed. We also provide new data, using a silent event-related (SER) design, which demonstrate higher blood oxygen level-dependent (BOLD) response to a simple auditory cue when compared to a conventional image acquisition. Copyright 2002 Wiley-Liss, Inc.

Training generalized improvisation of tools by preschool children1

PubMed Central

Parsonson, Barry S.; Baer, Donald M.

1978-01-01

The development of new, “creative” behaviors was examined in a problem-solving context. One form of problem solving, improvisation, was defined as finding a substitute to replace the specifically designated, but currently unavailable, tool ordinarily used to solve the problem. The study examined whether preschool children spontaneously displayed generalized improvisation skills, and if not, whether they could be trained to do so within different classes of tools. Generalization across different tool classes was monitored but not specifically trained. Five preschool children participated in individual sessions that first probed their skill at improvising tools, and later trained and probed generalized improvisation in one or more of three tool classes (Hammers, Containers, and Shoelaces), using a multiple-baseline design. All five children were trained with Hammers, two were trained in two classes, and two were trained in all three tool classes. Four of the five children improvised little in Baseline. During Training, all five showed increased generalized improvisation within the trained class, but none across classes. Tools fabricated by item combinations were rare in Baseline, but common in Training. Followup probes showed that the training effects were durable. PMID:16795596

Morphing Wing Weight Predictors and Their Application in a Template-Based Morphing Aircraft Sizing Environment II. Part 2; Morphing Aircraft Sizing via Multi-level Optimization

NASA Technical Reports Server (NTRS)

Skillen, Michael D.; Crossley, William A.

2008-01-01

This report presents an approach for sizing of a morphing aircraft based upon a multi-level design optimization approach. For this effort, a morphing wing is one whose planform can make significant shape changes in flight - increasing wing area by 50% or more from the lowest possible area, changing sweep 30 or more, and/or increasing aspect ratio by as much as 200% from the lowest possible value. The top-level optimization problem seeks to minimize the gross weight of the aircraft by determining a set of "baseline" variables - these are common aircraft sizing variables, along with a set of "morphing limit" variables - these describe the maximum shape change for a particular morphing strategy. The sub-level optimization problems represent each segment in the morphing aircraft's design mission; here, each sub-level optimizer minimizes fuel consumed during each mission segment by changing the wing planform within the bounds set by the baseline and morphing limit variables from the top-level problem.

Exact recovery of sparse multiple measurement vectors by [Formula: see text]-minimization.

PubMed

Wang, Changlong; Peng, Jigen

2018-01-01

The joint sparse recovery problem is a generalization of the single measurement vector problem widely studied in compressed sensing. It aims to recover a set of jointly sparse vectors, i.e., those that have nonzero entries concentrated at a common location. Meanwhile [Formula: see text]-minimization subject to matrixes is widely used in a large number of algorithms designed for this problem, i.e., [Formula: see text]-minimization [Formula: see text] Therefore the main contribution in this paper is two theoretical results about this technique. The first one is proving that in every multiple system of linear equations there exists a constant [Formula: see text] such that the original unique sparse solution also can be recovered from a minimization in [Formula: see text] quasi-norm subject to matrixes whenever [Formula: see text]. The other one is showing an analytic expression of such [Formula: see text]. Finally, we display the results of one example to confirm the validity of our conclusions, and we use some numerical experiments to show that we increase the efficiency of these algorithms designed for [Formula: see text]-minimization by using our results.

Common Problems with Pyrometry at Shock Physics Experiments and How to Avoid Them

NASA Astrophysics Data System (ADS)

Seifter, Achim; Obst, Andrew; Holtkamp, David

2007-06-01

Temperature is not only one of the most prominent parameters in shock physics experiments but also very hard to determine experimentally. Only a few techniques are available because of difficulties due to the short timescale and often very low temperatures. Pyrometry is the most portable of these techniques but has to deal with some problems which give rise to uncertainties. Only if the experiment is designed very carefully some of these difficulties like background radiation from high explosive burn products, muzzle flash or laser light can be avoided. Other problems like spatial temperature non-uniformities or thermal radiation from a transparent anvil are inherent to the experiment and cannot be avoided. By choosing the proper spectral range covered by the pyrometer and fitting the obtained spectral radiance traces with appropriate models meaningful results can be obtained. In this paper we will describe the most important points to be taken into account when designing the experiment, present considerations for choosing the wavelength range of the pyrometer and show data where spatial non uniformities or radiation from hot anvils occurred and temperature data could still be obtained.

Maternal pre-pregnancy weight and externalising behaviour problems in preschool children: a UK-based twin study.

PubMed

Antoniou, Evangelia E; Fowler, Tom; Reed, Keith; Southwood, Taunton R; McCleery, Joseph P; Zeegers, Maurice P

2014-10-14

To estimate the heritability of child behaviour problems and investigate the association between maternal pre-pregnancy overweight and child behaviour problems in a genetically sensitive design. Observational cross-sectional study. The Twins and Multiple Births Association Heritability Study (TAMBAHS) is an online UK-wide volunteer-based study investigating the development of twins from birth until 5 years of age. A total of 443 (16% of the initial registered members) mothers answered questions on pre-pregnancy weight and their twins' internalising and externalising problems using the Child Behavior Checklist and correcting for important covariates including gestational age, twins' birth weight, age and sex, mother's educational level and smoking (before, during and after pregnancy). The heritability of behaviour problems and their association with maternal pre-pregnancy weight. The genetic analysis suggested that genetic and common environmental factors account for most of the variation in externalising disorders (an ACE model was the most parsimonious with genetic factors (A) explaining 46% (95% CI 33% to 60%) of the variance, common environment (C) explaining 42% (95% CI 27% to 54%) and non-shared environmental factors (E) explaining 13% (95% CI 10% to 16%) of the variance. For internalising problems, a CE model was the most parsimonious model with the common environment explaining 51% (95% CI 44% to 58%) of the variance and non-shared environment explaining 49% (95% CI 42% to 56%) of the variance. Moreover, the regression analysis results suggested that children of overweight mothers showed a trend (OR=1.10, 95% CI 0.58% to 2.06) towards being more aggressive and exhibit externalising behaviours compared to children of normal weight mothers. Maternal pre-pregnancy weight may play a role in children's aggressive behaviour. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

KSC-2011-2266

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – Teams prepare for the "For Inspiration and Recognition of Science and Technology," or FIRST, competition at the University of Central Florida in Orlando. About 60 high school teams took part in hopes of advancing to the national robotics championship. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

KSC-2011-2270

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – Teams prepare for the "For Inspiration and Recognition of Science and Technology," or FIRST, competition at the University of Central Florida in Orlando. About 60 high school teams took part in hopes of advancing to the national robotics championship. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

A Five State Salary Survey of Postsecondary Vocational Technical Educators in Colorado, Iowa, Kansas, Nebraska, and Wyoming. A Descriptive Study of Reflective Criteria for Remuneration of Educational Personnel.

ERIC Educational Resources Information Center

Ahl, John E.; Rutledge, Roger A.

This study was designed to seek a solution to a common concern of postsecondary vocational technical institutions in five states, namely, the remuneration of educational personnel. The five states included in the survey had similar characteristics and conditions, and shared the problems of competition for capable staff and the availability of…

Propellant Management in Booster and Upper Stage Propulsion Systems

NASA Technical Reports Server (NTRS)

Fisher, Mark F.

1997-01-01

A summary review of some of the technical issues which surround the design of the propulsion systems for Booster and Upper Stage systems are presented. The work focuses on Propellant Geyser, Slosh, and Orientation. A brief description of the concern is given with graphics which help the reader to understand the physics of the situation. The most common solutions to these problems are given with there respective advantages and disadvantages.

Managing diversity: the best for everyone.

PubMed

Greenwald, H P

1994-01-01

Howard Greenwald argues that social diversity can be transformed from a "problem" to a solution if leaders can fashion ways of incorporating the commonalities across different groups in the population. Core values of "hard work, just rewards, and personal liberty" can form the foundation of shared understandings among persons of different nativity, culture, and gender. At the same time, Greenwald notes the importance of designing different strategies for different people.

National nutrition planning in developing countries via gaming-simulation.

PubMed

Duke, R D; Cary, R

1977-01-01

A nutrition game designed for the Food Policy and Nutrition Division of the Food and Agriculture Organization of the United Nations to aid in planning national nutrition education programs in Third World countries is described. The Simulated Nutrition System Game allows high-level ministerial staff in developing countries to discuss, via a common language created by SNUS I, the issues, problems, and complexities of national nutrition programs.

Problem Solving and Training Guide for Shipyard Industrial Engineers

DTIC Science & Technology

1986-06-01

Design Integration Tools Building 192 Room 128 9500 MacArthur Blvd Bethesda, MD 20817-5700 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING...called upon to increase the knowledge about industrial engineering of some shipyard group. The Curriculum is seen especially as a tool to identify new...materials on all common machine shop tools . Data permits calculation of machining time. 085 Ostwald, Phillip F. AMERICAN MACHINIST MANUFACTURING COST

Timing analysis by model checking

NASA Technical Reports Server (NTRS)

Naydich, Dimitri; Guaspari, David

2000-01-01

The safety of modern avionics relies on high integrity software that can be verified to meet hard real-time requirements. The limits of verification technology therefore determine acceptable engineering practice. To simplify verification problems, safety-critical systems are commonly implemented under the severe constraints of a cyclic executive, which make design an expensive trial-and-error process highly intolerant of change. Important advances in analysis techniques, such as rate monotonic analysis (RMA), have provided a theoretical and practical basis for easing these onerous restrictions. But RMA and its kindred have two limitations: they apply only to verifying the requirement of schedulability (that tasks meet their deadlines) and they cannot be applied to many common programming paradigms. We address both these limitations by applying model checking, a technique with successful industrial applications in hardware design. Model checking algorithms analyze finite state machines, either by explicit state enumeration or by symbolic manipulation. Since quantitative timing properties involve a potentially unbounded state variable (a clock), our first problem is to construct a finite approximation that is conservative for the properties being analyzed-if the approximation satisfies the properties of interest, so does the infinite model. To reduce the potential for state space explosion we must further optimize this finite model. Experiments with some simple optimizations have yielded a hundred-fold efficiency improvement over published techniques.

An efficient approach to improve the usability of e-learning resources: the role of heuristic evaluation.

PubMed

Davids, Mogamat Razeen; Chikte, Usuf M E; Halperin, Mitchell L

2013-09-01

Optimizing the usability of e-learning materials is necessary to maximize their potential educational impact, but this is often neglected when time and other resources are limited, leading to the release of materials that cannot deliver the desired learning outcomes. As clinician-teachers in a resource-constrained environment, we investigated whether heuristic evaluation of our multimedia e-learning resource by a panel of experts would be an effective and efficient alternative to testing with end users. We engaged six inspectors, whose expertise included usability, e-learning, instructional design, medical informatics, and the content area of nephrology. They applied a set of commonly used heuristics to identify usability problems, assigning severity scores to each problem. The identification of serious problems was compared with problems previously found by user testing. The panel completed their evaluations within 1 wk and identified a total of 22 distinct usability problems, 11 of which were considered serious. The problems violated the heuristics of visibility of system status, user control and freedom, match with the real world, intuitive visual layout, consistency and conformity to standards, aesthetic and minimalist design, error prevention and tolerance, and help and documentation. Compared with user testing, heuristic evaluation found most, but not all, of the serious problems. Combining heuristic evaluation and user testing, with each involving a small number of participants, may be an effective and efficient way of improving the usability of e-learning materials. Heuristic evaluation should ideally be used first to identify the most obvious problems and, once these are fixed, should be followed by testing with typical end users.

A Simplified Design with a Toothed Belt and Non-Circular Pulleys to Separate Parts from a Magazine File

NASA Astrophysics Data System (ADS)

Hanke, U.; Modler, K.-H.; Neumann, R.; Fischer, C.

The objective of this paper is to simplify a very complex guidance mechanism, currently used for lid separating issues in a packaging-machine. The task of this machine is to pick up a lid from a magazine file, rotate it around 180° and place it on tins. The developed mechanism works successfully but with a very complex construction. It consists of a planetary cam mechanism, combined with a toothed gear (with a constant transmission ratio) and a guiding mechanism with a toothed belt and circular pulleys. Such complex constructions are very common in industrial solutions. The idea of the authors is to show a much simpler design in solving the same problem. They developed a guidance mechanism realizing the same function, consisting only of a toothed belt with non-circular pulleys. The used parts are common trade articles.

KSC-07pd0610

NASA Image and Video Library

2007-03-09

KENNEDY SPACE CENTER, FLA. -- Student competitors listen to game rules before the FIRST robotics event held at the University of Central Florida Arena March 8-10. The FIRST, or For Inspiration and Recognition of Science and Technology, Robotics Competition challenges teams of young people and their mentors to solve a common problem in a six-week timeframe using a standard "kit of parts" and a common set of rules. Teams build robots from the parts and enter them in a series of competitions designed by FIRST founder Dean Kamen and Dr. Woodie Flowers, chairman and vice chairman of the Executive Advisory Board respectively, and a committee of engineers and other professionals. FIRST redefines winning for these students. Teams are rewarded for excellence in design, demonstrated team spirit, gracious professionalism and maturity, and ability to overcome obstacles. Scoring the most points is a secondary goal. Winning means building partnerships that last. Photo credit: NASA/Kim Shiflett

KSC-07pd0616

NASA Image and Video Library

2007-03-09

KENNEDY SPACE CENTER, FLA. -- The audience anxiously awaits a referee's decision during competition of student teams in the FIRST robotics event held at the University of Central Florida Arena March 8-10. The FIRST, or For Inspiration and Recognition of Science and Technology, Robotics Competition challenges teams of young people and their mentors to solve a common problem in a six-week timeframe using a standard "kit of parts" and a common set of rules. Teams build robots from the parts and enter them in a series of competitions designed by FIRST founder Dean Kamen and Dr. Woodie Flowers, chairman and vice chairman of the Executive Advisory Board respectively, and a committee of engineers and other professionals. FIRST redefines winning for these students. Teams are rewarded for excellence in design, demonstrated team spirit, gracious professionalism and maturity, and ability to overcome obstacles. Scoring the most points is a secondary goal. Winning means building partnerships that last. Photo credit: NASA/Kim Shiflett

KSC-07pd0615

NASA Image and Video Library

2007-03-09

KENNEDY SPACE CENTER, FLA. -- The student team dressed in pink is a coordinated effort cosponsored by NASA KSC and representing Rockledge, Cocoa Beach and Viera High Schools in Central Florida. The FIRST, or For Inspiration and Recognition of Science and Technology, Robotics Competition challenges teams of young people and their mentors to solve a common problem in a six-week timeframe using a standard "kit of parts" and a common set of rules. Teams build robots from the parts and enter them in a series of competitions designed by FIRST founder Dean Kamen and Dr. Woodie Flowers, chairman and vice chairman of the Executive Advisory Board respectively, and a committee of engineers and other professionals. FIRST redefines winning for these students. Teams are rewarded for excellence in design, demonstrated team spirit, gracious professionalism and maturity, and ability to overcome obstacles. Scoring the most points is a secondary goal. Winning means building partnerships that last. Photo credit: NASA/Kim Shiflett

Multidirectional hybrid algorithm for the split common fixed point problem and application to the split common null point problem.

PubMed

Li, Xia; Guo, Meifang; Su, Yongfu

2016-01-01

In this article, a new multidirectional monotone hybrid iteration algorithm for finding a solution to the split common fixed point problem is presented for two countable families of quasi-nonexpansive mappings in Banach spaces. Strong convergence theorems are proved. The application of the result is to consider the split common null point problem of maximal monotone operators in Banach spaces. Strong convergence theorems for finding a solution of the split common null point problem are derived. This iteration algorithm can accelerate the convergence speed of iterative sequence. The results of this paper improve and extend the recent results of Takahashi and Yao (Fixed Point Theory Appl 2015:87, 2015) and many others .

Optimal design of groundwater remediation system using a probabilistic multi-objective fast harmony search algorithm under uncertainty

NASA Astrophysics Data System (ADS)

Luo, Qiankun; Wu, Jianfeng; Yang, Yun; Qian, Jiazhong; Wu, Jichun

2014-11-01

This study develops a new probabilistic multi-objective fast harmony search algorithm (PMOFHS) for optimal design of groundwater remediation systems under uncertainty associated with the hydraulic conductivity (K) of aquifers. The PMOFHS integrates the previously developed deterministic multi-objective optimization method, namely multi-objective fast harmony search algorithm (MOFHS) with a probabilistic sorting technique to search for Pareto-optimal solutions to multi-objective optimization problems in a noisy hydrogeological environment arising from insufficient K data. The PMOFHS is then coupled with the commonly used flow and transport codes, MODFLOW and MT3DMS, to identify the optimal design of groundwater remediation systems for a two-dimensional hypothetical test problem and a three-dimensional Indiana field application involving two objectives: (i) minimization of the total remediation cost through the engineering planning horizon, and (ii) minimization of the mass remaining in the aquifer at the end of the operational period, whereby the pump-and-treat (PAT) technology is used to clean up contaminated groundwater. Also, Monte Carlo (MC) analysis is employed to evaluate the effectiveness of the proposed methodology. Comprehensive analysis indicates that the proposed PMOFHS can find Pareto-optimal solutions with low variability and high reliability and is a potentially effective tool for optimizing multi-objective groundwater remediation problems under uncertainty.

Peer rejection in childhood, involvement with antisocial peers in early adolescence, and the development of externalizing behavior problems

PubMed Central

Laird, Robert D.; Jordan, Kristi Y.; Dodge, Kenneth A.; Pettit, Gregory S.; Bates, John E.

2009-01-01

A longitudinal, prospective design was used to examine the roles of peer rejection in middle childhood and antisocial peer involvement in early adolescence in the development of adolescent externalizing behavior problems. Both early starter and late starter pathways were considered. Classroom sociometric interviews from ages 6 through 9 years, adolescent reports of peers' behavior at age 13 years, and parent, teacher, and adolescent self-reports of externalizing behavior problems from age 5 through 14 years were available for 400 adolescents. Results indicate that experiencing peer rejection in elementary school and greater involvement with antisocial peers in early adolescence are correlated but that these peer relationship experiences may represent two different pathways to adolescent externalizing behavior problems. Peer rejection experiences, but not involvement with antisocial peers, predict later externalizing behavior problems when controlling for stability in externalizing behavior. Externalizing problems were most common when rejection was experienced repeatedly. Early externalizing problems did not appear to moderate the relation between peer rejection and later problem behavior. Discussion highlights multiple pathways connecting externalizing behavior problems from early childhood through adolescence with peer relationship experiences in middle childhood and early adolescence. PMID:11393650

Lattice Boltzmann computation of creeping fluid flow in roll-coating applications

NASA Astrophysics Data System (ADS)

Rajan, Isac; Kesana, Balashanker; Perumal, D. Arumuga

2018-04-01

Lattice Boltzmann Method (LBM) has advanced as a class of Computational Fluid Dynamics (CFD) methods used to solve complex fluid systems and heat transfer problems. It has ever-increasingly attracted the interest of researchers in computational physics to solve challenging problems of industrial and academic importance. In this current study, LBM is applied to simulate the creeping fluid flow phenomena commonly encountered in manufacturing technologies. In particular, we apply this novel method to simulate the fluid flow phenomena associated with the "meniscus roll coating" application. This prevalent industrial problem encountered in polymer processing and thin film coating applications is modelled as standard lid-driven cavity problem to which creeping flow analysis is applied. This incompressible viscous flow problem is studied in various speed ratios, the ratio of upper to lower lid speed in two different configurations of lid movement - parallel and anti-parallel wall motion. The flow exhibits interesting patterns which will help in design of roll coaters.

A proposal to encourage intuitive learning in a senior-level analogue electronics course

NASA Astrophysics Data System (ADS)

Berjano, E.; Lozano-Nieto, A.

2011-05-01

One of the most important issues in the reorganisation of engineering education is to consider new pedagogical techniques to help students develop skills and an adaptive expertise. This expertise consists of being able to recognise the nature of a problem intuitively, and also recognising recurring patterns in different types of problems. In the particular case of analogue electronics, an additional difficulty seems to be that understanding involves both analytic skills and an intuitive grasp of circuit characteristics. This paper presents a proposal to help senior students to think intuitively in order to identify the common issue involved in a group of problems of analogue electronics and build an abstract concept based on, for example, a theory or a mathematical model in order to use it to solve future problems. The preliminary results suggest that this proposal could be useful to promote intuitive reasoning in analogue electronics courses. The experience would later be useful to graduates in analytically solving new types of problems or in designing new electronic circuits.

How definition of mental health problems can influence help seeking in rural and remote communities.

PubMed

Fuller, J; Edwards, J; Procter, N; Moss, J

2000-06-01

The present study sought to understand the rural and remote influences on people's identification of, and response to, mental health problems. Twenty-two key informants living in northern and western South Australia were interviewed. They included mental health and generalist health professionals, other human service workers and mental health consumers. Three themes are reported here: reluctance to acknowledge mental health problems and the avoidance of appropriate help; stigma and the avoidance of mental health services; and the influence of rural and remote circumstances. Most informants considered that many mental health problems were amenable to help from generalist workers, with backup support from mental health specialists. Informants thought this intervention to be appropriate because a common view of mental health problems as 'insanity' and a culture of self-reliance created a reluctance to seek help from a mental health specialist. These themes need to be taken into account when designing mental health interventions for rural and remote communities.

Assessment of risky sexual behavior and practice among Aksum University students, Shire Campus, Shire Town, Tigray, Ethiopia, 2017.

PubMed

Kebede, Awoke; Molla, Bogale; Gerensea, Hadgu

2018-01-31

Having sex at early age, having multiple sexual partners, having sex while under the influence of alcohol or drugs and unprotected sexual behaviors are the common characteristics of risky sexual behavior which increases risk of individuals to sexuality and reproductive health problems. Risky sexual behavior is the most common problem in adolescents and young adults which may expose individuals for permanent social, economical, psychological and physical problem. So that this study focus on assessment of risk sexual behavior using institution based cross-sectional study design on 287 randomly selected subjects among Aksum University students. Almost 60% students reported to have ever had sexual activity. Of which 86 (83.5%) and 112 (64.4%) reported having inconsistent condom use and multiple sexual partners respectively. Even though more than half of first sexual intercourse (61.5%) starts due to their desire but still peer pressure and alcohol have significant effect. Similarly the study indicated that a significant segment of students have risk sexual behaviors which increase individuals' risk of acquiring HIV/AIDS. Unless appropriate age and institutional targeted interventions exist, certain behaviors can place the university students at greater risk of HIV infection and sexually transmitted disease.

Influence of gamma-ray skyshine on nuclear facilities design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ohta, M.; Tsuji, M.; Kimura, Y.

1986-01-01

In safety analysis of nuclear facilities, skyshine dose rate at site boundary is one of the most important shielding design problems. For nuclear power stations in Japan, the skyshine dose rate at the site boundary has been specified not to exceed 5 mR/yr by the authorities, including total dose contribution from all structures on site, and this guide is commonly applied to other nuclear fuel cycle facilities. Therefore the design criterion dose of each structure on site is, considering plot planning, shielding condition, and so on, defined as a value <5 mR/yr. The purpose of this study is to investigatemore » how skyshine dose standards or other factors have an influence on the design of nuclear facilities, in a parametric survey of gamma-ray skyshine.« less

Resilience Design Patterns - A Structured Approach to Resilience at Extreme Scale (version 1.1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hukerikar, Saurabh; Engelmann, Christian

Reliability is a serious concern for future extreme-scale high-performance computing (HPC) systems. Projections based on the current generation of HPC systems and technology roadmaps suggest the prevalence of very high fault rates in future systems. The errors resulting from these faults will propagate and generate various kinds of failures, which may result in outcomes ranging from result corruptions to catastrophic application crashes. Therefore the resilience challenge for extreme-scale HPC systems requires management of various hardware and software technologies that are capable of handling a broad set of fault models at accelerated fault rates. Also, due to practical limits on powermore » consumption in HPC systems future systems are likely to embrace innovative architectures, increasing the levels of hardware and software complexities. As a result the techniques that seek to improve resilience must navigate the complex trade-off space between resilience and the overheads to power consumption and performance. While the HPC community has developed various resilience solutions, application-level techniques as well as system-based solutions, the solution space of HPC resilience techniques remains fragmented. There are no formal methods and metrics to investigate and evaluate resilience holistically in HPC systems that consider impact scope, handling coverage, and performance & power efficiency across the system stack. Additionally, few of the current approaches are portable to newer architectures and software environments that will be deployed on future systems. In this document, we develop a structured approach to the management of HPC resilience using the concept of resilience-based design patterns. A design pattern is a general repeatable solution to a commonly occurring problem. We identify the commonly occurring problems and solutions used to deal with faults, errors and failures in HPC systems. Each established solution is described in the form of a pattern that addresses concrete problems in the design of resilient systems. The complete catalog of resilience design patterns provides designers with reusable design elements. We also define a framework that enhances a designer's understanding of the important constraints and opportunities for the design patterns to be implemented and deployed at various layers of the system stack. This design framework may be used to establish mechanisms and interfaces to coordinate flexible fault management across hardware and software components. The framework also supports optimization of the cost-benefit trade-offs among performance, resilience, and power consumption. The overall goal of this work is to enable a systematic methodology for the design and evaluation of resilience technologies in extreme-scale HPC systems that keep scientific applications running to a correct solution in a timely and cost-efficient manner in spite of frequent faults, errors, and failures of various types.« less

Development of the Modes of Collaboration framework

NASA Astrophysics Data System (ADS)

Pawlak, Alanna; Irving, Paul W.; Caballero, Marcos D.

2018-01-01

Group work is becoming increasingly common in introductory physics classrooms. Understanding how students engage in these group learning environments is important for designing and facilitating productive learning opportunities for students. We conducted a study in which we collected video of groups of students working on conceptual electricity and magnetism problems in an introductory physics course. In this setting, students needed to negotiate a common understanding and coordinate group decisions in order to complete the activity successfully. We observed students interacting in several distinct ways while solving these problems. Analysis of these observations focused on identifying the different ways students interacted and articulating what defines and distinguishes them, resulting in the development of the modes of collaboration framework. The modes of collaboration framework defines student interactions along three dimensions: social, discursive, and disciplinary content. This multidimensional approach offers a unique lens through which to consider group work and provides a flexibility that could allow the framework to be adapted for a variety of contexts. We present the framework and several examples of its application here.

Collaborative engineering-design support system

NASA Technical Reports Server (NTRS)

Lee, Dong HO; Decker, D. Richard

1994-01-01

Designing engineering objects requires many engineers' knowledge from different domains. There needs to be cooperative work among engineering designers to complete a design. Revisions of a design are time consuming, especially if designers work at a distance and with different design description formats. In order to reduce the design cycle, there needs to be a sharable design describing the engineering community, which can be electronically transportable. Design is a process of integrating that is not easy to define definitively. This paper presents Design Script which is a generic engineering design knowledge representation scheme that can be applied in any engineering domain. The Design Script is developed through encapsulation of common design activities and basic design components based on problem decomposition. It is implemented using CLIPS with a Windows NT graphical user interface. The physical relationships between engineering objects and their subparts can be constructed in a hierarchical manner. The same design process is repeatedly applied at each given level of hierarchy and recursively into lower levels of the hierarchy. Each class of the structure can be represented using the Design Script.

Revisiting software specification and design for large astronomy projects

NASA Astrophysics Data System (ADS)

Wiant, Scott; Berukoff, Steven

2016-07-01

The separation of science and engineering in the delivery of software systems overlooks the true nature of the problem being solved and the organization that will solve it. Use of a systems engineering approach to managing the requirements flow between these two groups as between a customer and contractor has been used with varying degrees of success by well-known entities such as the U.S. Department of Defense. However, treating science as the customer and engineering as the contractor fosters unfavorable consequences that can be avoided and opportunities that are missed. For example, the "problem" being solved is only partially specified through the requirements generation process since it focuses on detailed specification guiding the parties to a technical solution. Equally important is the portion of the problem that will be solved through the definition of processes and staff interacting through them. This interchange between people and processes is often underrepresented and under appreciated. By concentrating on the full problem and collaborating on a strategy for its solution a science-implementing organization can realize the benefits of driving towards common goals (not just requirements) and a cohesive solution to the entire problem. The initial phase of any project when well executed is often the most difficult yet most critical and thus it is essential to employ a methodology that reinforces collaboration and leverages the full suite of capabilities within the team. This paper describes an integrated approach to specifying the needs induced by a problem and the design of its solution.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hobbs, R.E.

In large facilities, successful energy management cannot be measured by a few projects, no matter how significant the energy savings. Large facilities today are comprised of extensive energy consuming systems. For every energy project developed, two more projects remain to be discovered. The successful energy manager is one who has completed ten projects, or twenty, or thirty, and is still finding more projects to do. Nothing is assumed to be as efficient as possible, and no part of any system is ignored. The successful energy manager is willing to take risks, not of being fired, but to use imagination, studymore » engineering theory, exercise common sense, develop concept designs, calculate savings, sell projects to management, control designers, study equipment performance, pre-select contractors, manage the contractor efforts, solve inherent problems along the way, and then optimize the project after acceptance when the designers and contractors all walk off. Once the successful energy manager establishes his credibility, his problem becomes finding enough time to get the projects rolling as he dreams them up. He sees what others do not. As they say in the North, only the lead dog sees new scenery.« less

Consensus properties and their large-scale applications for the gene duplication problem.

PubMed

Moon, Jucheol; Lin, Harris T; Eulenstein, Oliver

2016-06-01

Solving the gene duplication problem is a classical approach for species tree inference from gene trees that are confounded by gene duplications. This problem takes a collection of gene trees and seeks a species tree that implies the minimum number of gene duplications. Wilkinson et al. posed the conjecture that the gene duplication problem satisfies the desirable Pareto property for clusters. That is, for every instance of the problem, all clusters that are commonly present in the input gene trees of this instance, called strict consensus, will also be found in every solution to this instance. We prove that this conjecture does not generally hold. Despite this negative result we show that the gene duplication problem satisfies a weaker version of the Pareto property where the strict consensus is found in at least one solution (rather than all solutions). This weaker property contributes to our design of an efficient scalable algorithm for the gene duplication problem. We demonstrate the performance of our algorithm in analyzing large-scale empirical datasets. Finally, we utilize the algorithm to evaluate the accuracy of standard heuristics for the gene duplication problem using simulated datasets.

Optimization of permeability for quality improvement by using factorial design

NASA Astrophysics Data System (ADS)

Said, Rahaini Mohd; Miswan, Nor Hamizah; Juan, Ng Shu; Hussin, Nor Hafizah; Ahmad, Aminah; Kamal, Mohamad Ridzuan Mohamad

2017-05-01

Sand castings are used worldwide by the manufacturing process in Metal Casting Industry, whereby the green sand are the commonly used sand mould type in the industry of sand casting. The defects on the surface of casting product is one of the problems in the industry of sand casting. The problems that relates to the defect composition of green sand are such as blowholes, pinholes shrinkage and porosity. Our objective is to optimize the best composition of green sand in order to minimize the occurrence of defects. Sand specimen of difference parameters (Bentonite, Green Sand, Cold dust and water) were design and prepared to undergo permeability test. The 24 factorial design experiment with four factors at difference composition were runs, and the total of 16 runs experiment were conducted. The developed models based on the experimental design necessary models were obtained. The model with a high coefficient of determination (R2=0.9841) and model for predicted and actual fitted well with the experimental data. Using the Analysis of Design Expert software, we identified that bentonite and water are the main interaction effect in the experiments. The optimal settings for green sand composition are 100g silica sand, 21g bentonite, 6.5 g water and 6g coal dust. This composition gives an effect of permeability number 598.3GP.

Analysis and design of planar and non-planar wings for induced drag minimization

NASA Technical Reports Server (NTRS)

Mortara, K.; Straussfogel, Dennis M.; Maughmer, Mark D.

1991-01-01

The goal of the work was to develop and validate computational tools to be used for the design of planar and non-planar wing geometries for minimum induced drag. Because of the iterative nature of the design problem, it is important that, in addition to being sufficiently accurate for the problem at hand, they are reasonably fast and computationally efficient. Toward this end, a method of predicting induced drag in the presence of a non-rigid wake is coupled with a panel method. The induced drag prediction technique is based on the Kutta-Joukowski law applied at the trailing edge. Until recently, the use of this method has not been fully explored and pressure integration and Trefftz-plane calculations favored. As is shown in this report, however, the Kutta-Joukowski method is able to give better results for a given amount of effort than the more common techniques, particularly when relaxed wakes and non-planar wing geometries are considered. Using these tools, a workable design method is in place which takes into account relaxed wakes and non-planar wing geometries. It is recommended that this method be used to design a wind-tunnel experiment to verify the predicted aerodynamic benefits of non-planar wing geometries.

Deriving Function-failure Similarity Information for Failure-free Rotorcraft Component Design

NASA Technical Reports Server (NTRS)

Roberts, Rory A.; Stone, Robert B.; Tumer, Irem Y.; Clancy, Daniel (Technical Monitor)

2002-01-01

Performance and safety are the top concerns of high-risk aerospace applications at NASA. Eliminating or reducing performance and safety problems can be achieved with a thorough understanding of potential failure modes in the design that lead to these problems. The majority of techniques use prior knowledge and experience as well as Failure Modes and Effects as methods to determine potential failure modes of aircraft. The aircraft design needs to be passed through a general technique to ensure that every potential failure mode is considered, while avoiding spending time on improbable failure modes. In this work, this is accomplished by mapping failure modes to certain components, which are described by their functionality. In turn, the failure modes are then linked to the basic functions that are carried within the components of the aircraft. Using the technique proposed in this paper, designers can examine the basic functions, and select appropriate analyses to eliminate or design out the potential failure modes. This method was previously applied to a simple rotating machine test rig with basic functions that are common to a rotorcraft. In this paper, this technique is applied to the engine and power train of a rotorcraft, using failures and functions obtained from accident reports and engineering drawings.

Behavioral Economic Indicators of Drinking Problem Severity and Initial Outcomes Among Problem Drinkers Attempting Natural Recovery: A Cross-sectional Naturalistic Study

PubMed Central

Tucker, Jalie A.; Cheong, JeeWon; Chandler, Susan D.; Lambert, Brice H.; Kwok, Heather; Pietrzak, Brittney

2016-01-01

Background and aims Research using different behavioral economic (BE) and time perspective (TP) measures suggests that substance misusers show greater sensitivity to shorter term contingencies than normal controls, but multiple measures have seldom been investigated together. This study evaluated the extent to which multiple BE and TP measures were associated with drinking problem severity, distinguished initial outcomes of natural recovery attempts, and shared common variance. Hypotheses were (1) greater problem severity would be associated with greater impulsivity and demand for alcohol and shorter TPs; and (2) low-risk drinking would be associated with greater sensitivity to longer term contingencies compared with abstinence. Design Cross-sectional naturalistic field study. Setting Southern United States. Participants Problem drinkers, recently resolved without treatment (N = 191 [76.4% male], M age = 50.1 years) recruited using media advertisements. Measurements Drinking practices, dependence levels, and alcohol-related problems prior to stopping problem drinking were assessed during structured field interviews. Measures included the Zimbardo Time Perspective Inventory; BE analogue choice tasks (Delay Discounting [DD], Melioration-Maximization [MM], Alcohol Purchase Task [APT]); and the Alcohol-Savings Discretionary Expenditure (ASDE) index, derived from real spending on alcohol and voluntary savings during the year before problem cessation. Findings Measures of demand based on real (ASDE) and hypothetical (APT) spending on alcohol were associated with problem severity (ps < .05), but DD, MM, and TP measures were not. More balanced pre-resolution spending on alcohol versus saving for the future distinguished low-risk drinking from abstinent resolutions (ASDE OR = 5.59; p < .001). BE measures did not share common variance. Conclusions Two behavioural assessment tools that measure spending on alcohol, the Alcohol Purchase Task and the Alcohol-Savings Discretionary Expenditure index, appear to be reliable in assessing the severity of drinking problems. The ASDE index also may aid choices between low-risk and abstinent drinking goals. PMID:27318078

Multicriteria optimization approach to design and operation of district heating supply system over its life cycle

NASA Astrophysics Data System (ADS)

Hirsch, Piotr; Duzinkiewicz, Kazimierz; Grochowski, Michał

2017-11-01

District Heating (DH) systems are commonly supplied using local heat sources. Nowadays, modern insulation materials allow for effective and economically viable heat transportation over long distances (over 20 km). In the paper a method for optimized selection of design and operating parameters of long distance Heat Transportation System (HTS) is proposed. The method allows for evaluation of feasibility and effectivity of heat transportation from the considered heat sources. The optimized selection is formulated as multicriteria decision-making problem. The constraints for this problem include a static HTS model, allowing considerations of system life cycle, time variability and spatial topology. Thereby, variation of heat demand and ground temperature within the DH area, insulation and pipe aging and/or terrain elevation profile are taken into account in the decision-making process. The HTS construction costs, pumping power, and heat losses are considered as objective functions. Inner pipe diameter, insulation thickness, temperatures and pumping stations locations are optimized during the decision-making process. Moreover, the variants of pipe-laying e.g. one pipeline with the larger diameter or two with the smaller might be considered during the optimization. The analyzed optimization problem is multicriteria, hybrid and nonlinear. Because of such problem properties, the genetic solver was applied.

A Discrete Fruit Fly Optimization Algorithm for the Traveling Salesman Problem.

PubMed

Jiang, Zi-Bin; Yang, Qiong

2016-01-01

The fruit fly optimization algorithm (FOA) is a newly developed bio-inspired algorithm. The continuous variant version of FOA has been proven to be a powerful evolutionary approach to determining the optima of a numerical function on a continuous definition domain. In this study, a discrete FOA (DFOA) is developed and applied to the traveling salesman problem (TSP), a common combinatorial problem. In the DFOA, the TSP tour is represented by an ordering of city indices, and the bio-inspired meta-heuristic search processes are executed with two elaborately designed main procedures: the smelling and tasting processes. In the smelling process, an effective crossover operator is used by the fruit fly group to search for the neighbors of the best-known swarm location. During the tasting process, an edge intersection elimination (EXE) operator is designed to improve the neighbors of the non-optimum food location in order to enhance the exploration performance of the DFOA. In addition, benchmark instances from the TSPLIB are classified in order to test the searching ability of the proposed algorithm. Furthermore, the effectiveness of the proposed DFOA is compared to that of other meta-heuristic algorithms. The results indicate that the proposed DFOA can be effectively used to solve TSPs, especially large-scale problems.

A Discrete Fruit Fly Optimization Algorithm for the Traveling Salesman Problem

PubMed Central

Jiang, Zi-bin; Yang, Qiong

2016-01-01

The fruit fly optimization algorithm (FOA) is a newly developed bio-inspired algorithm. The continuous variant version of FOA has been proven to be a powerful evolutionary approach to determining the optima of a numerical function on a continuous definition domain. In this study, a discrete FOA (DFOA) is developed and applied to the traveling salesman problem (TSP), a common combinatorial problem. In the DFOA, the TSP tour is represented by an ordering of city indices, and the bio-inspired meta-heuristic search processes are executed with two elaborately designed main procedures: the smelling and tasting processes. In the smelling process, an effective crossover operator is used by the fruit fly group to search for the neighbors of the best-known swarm location. During the tasting process, an edge intersection elimination (EXE) operator is designed to improve the neighbors of the non-optimum food location in order to enhance the exploration performance of the DFOA. In addition, benchmark instances from the TSPLIB are classified in order to test the searching ability of the proposed algorithm. Furthermore, the effectiveness of the proposed DFOA is compared to that of other meta-heuristic algorithms. The results indicate that the proposed DFOA can be effectively used to solve TSPs, especially large-scale problems. PMID:27812175

A computational framework to empower probabilistic protein design

PubMed Central

Fromer, Menachem; Yanover, Chen

2008-01-01

Motivation: The task of engineering a protein to perform a target biological function is known as protein design. A commonly used paradigm casts this functional design problem as a structural one, assuming a fixed backbone. In probabilistic protein design, positional amino acid probabilities are used to create a random library of sequences to be simultaneously screened for biological activity. Clearly, certain choices of probability distributions will be more successful in yielding functional sequences. However, since the number of sequences is exponential in protein length, computational optimization of the distribution is difficult. Results: In this paper, we develop a computational framework for probabilistic protein design following the structural paradigm. We formulate the distribution of sequences for a structure using the Boltzmann distribution over their free energies. The corresponding probabilistic graphical model is constructed, and we apply belief propagation (BP) to calculate marginal amino acid probabilities. We test this method on a large structural dataset and demonstrate the superiority of BP over previous methods. Nevertheless, since the results obtained by BP are far from optimal, we thoroughly assess the paradigm using high-quality experimental data. We demonstrate that, for small scale sub-problems, BP attains identical results to those produced by exact inference on the paradigmatic model. However, quantitative analysis shows that the distributions predicted significantly differ from the experimental data. These findings, along with the excellent performance we observed using BP on the smaller problems, suggest potential shortcomings of the paradigm. We conclude with a discussion of how it may be improved in the future. Contact: fromer@cs.huji.ac.il PMID:18586717

Chemical Markup, XML, and the World Wide Web. 7. CMLSpect, an XML vocabulary for spectral data.

PubMed

Kuhn, Stefan; Helmus, Tobias; Lancashire, Robert J; Murray-Rust, Peter; Rzepa, Henry S; Steinbeck, Christoph; Willighagen, Egon L

2007-01-01

CMLSpect is an extension of Chemical Markup Language (CML) for managing spectral and other analytical data. It is designed to be flexible enough to contain a wide variety of spectral data. The paper describes the CMLElements used and gives practical examples for common types of spectra. In addition it demonstrates how different views of the data can be expressed and what problems still exist.

A Survey of Collective Intelligence

NASA Technical Reports Server (NTRS)

Wolpert, David H.; Tumer, Kagan

1999-01-01

This chapter presents the science of "COllective INtelligence" (COIN). A COIN is a large multi-agent systems where: i) the agents each run reinforcement learning (RL) algorithms; ii) there is little to no centralized communication or control; iii) there is a provided world utility function that, rates the possible histories of tile full system. Tile conventional approach to designing large distributed systems to optimize a world utility does not use agents running RL algorithms. Rather that approach begins with explicit modeling of the overall system's dynamics, followed by detailed hand-tuning of the interactions between the components to ensure that they "cooperate" as far as the world utility is concerned. This approach is labor-intensive, often results in highly non-robust systems, and usually results in design techniques that, have limited applicability. In contrast, with COINs we wish to solve the system design problems implicitly, via the 'adaptive' character of the RL algorithms of each of the agents. This COIN approach introduces an entirely new, profound design problem: Assuming the RL algorithms are able to achieve high rewards, what reward functions for the individual agents will, when pursued by those agents, result in high world utility? In other words, what reward functions will best ensure that we do not have phenomena like the tragedy of the commons, or Braess's paradox? Although still very young, the science of COINs has already resulted in successes in artificial domains, in particular in packet-routing, the leader-follower problem, and in variants of Arthur's "El Farol bar problem". It is expected that as it matures not only will COIN science expand greatly the range of tasks addressable by human engineers, but it will also provide much insight into already established scientific fields, such as economics, game theory, or population biology.

Vaginal Diseases

MedlinePlus

Vaginal problems are some of the most common reasons women go to the doctor. They may have ... common problem is vaginitis, an inflammation of the vagina. Other problems that affect the vagina include sexually ...

How to Make a Synthetic Multicellular Computer

PubMed Central

Macia, Javier; Sole, Ricard

2014-01-01

Biological systems perform computations at multiple scales and they do so in a robust way. Engineering metaphors have often been used in order to provide a rationale for modeling cellular and molecular computing networks and as the basis for their synthetic design. However, a major constraint in this mapping between electronic and wet computational circuits is the wiring problem. Although wires are identical within electronic devices, they must be different when using synthetic biology designs. Moreover, in most cases the designed molecular systems cannot be reused for other functions. A new approximation allows us to simplify the problem by using synthetic cellular consortia where the output of the computation is distributed over multiple engineered cells. By evolving circuits in silico, we can obtain the minimal sets of Boolean units required to solve the given problem at the lowest cost using cellular consortia. Our analysis reveals that the basic set of logic units is typically non-standard. Among the most common units, the so called inverted IMPLIES (N-Implies) appears to be one of the most important elements along with the NOT and AND functions. Although NOR and NAND gates are widely used in electronics, evolved circuits based on combinations of these gates are rare, thus suggesting that the strategy of combining the same basic logic gates might be inappropriate in order to easily implement synthetic computational constructs. The implications for future synthetic designs, the general view of synthetic biology as a standard engineering domain, as well as potencial drawbacks are outlined. PMID:24586222

Kolkata Paise Restaurant Problem and the Cyclically Fair Norm

NASA Astrophysics Data System (ADS)

Banerjee, Priyodorshi; Mitra, Manipushpak; Mukherjee, Conan

In this paper we revisit the Kolkata Paise Restaurant problem by allowing for a more general (but common) preference of the n customers defined over the set of n restaurants. This generalization allows for the possibility that each pure strategy Nash equilibrium differs from the Pareto efficient allocation. By assuming that n is small and by allowing for mutual interaction across all customers we design strategies to sustain cyclically fair norm as a sub-game perfect equilibrium of the Kolkata Paise Restaurant problem. We have a cyclically fair norm if n strategically different Pareto efficient strategies are sequentially sustained in a way such that each customer gets serviced in all the n restaurants exactly once between periods 1 and n and then again the same process is repeated between periods (n+1) and 2n and so on.

Prevalence of neuropsychiatric symptoms in Alzheimer's disease: a cross-sectional descriptive study in Thailand.

PubMed

Charernboon, Thammanard; Phanasathit, Muthita

2014-05-01

To estimate the prevalence of neuropsychiatric symptoms in Thai patients with Alzheimer's disease. The present study is a cross-sectional descriptive design. The participants comprised 62 patients from the Memory Clinic at Thammasat University Hospital, Thailand. Subjects were diagnosed as having Alzheimer's disease according to the National Institute of Neurological and Communicative Disorders and Stroke and Alzheimer's disease and Related Disorders Association (NINCDS-ADRDA) criteria and received global Clinical Dementia Rating scale (CDR) score of at least stage 1. All participants were assessed using the Neuropsychiatric Inventory Questionnaire (NPI) and the Thai Mental State Examination (TMSE). The subjects were female 62.9% and male 37.1%, the mean age was 76 +/- 6.7 years. The majority of them (62.9%) were in the mild stage (CDR = 1). The result showed that the prevalence of neuropsychiatric symptoms (> or = 1 symptom) reported was 100%. The most common symptoms were apathy (71%), aberrant motor behavior (61.3%), sleep problems (56.5%), eating problems (51.6%) and agitation/aggression (45.2%), whereas the least was euphoria (6.5%). The number of neuropsychiatric symptoms increased with severity of the disease. The result also showed that 61.3% of the participants presented with the chief complaint of neuropsychiatric symptoms, whereas memory complaints were only 38.7%. Neuropsychiatric symptoms are very common in Thai Alzheimer's disease patients. Therefore, management of Alzheimer's patients should include an assessment of neuropsychiatric symptoms and also concentrate on reducing these symptoms. The number of neuropsychiatric symptoms increases with disease progression. Moreover, neuropsychiatric symptoms were the most common presenting problem rather than memory problem in Thai patients with Alzheimer's disease.

Common Methodological Problems in Research on the Addictions.

ERIC Educational Resources Information Center

Nathan, Peter E.; Lansky, David

1978-01-01

Identifies common problems in research on the addictions and offers suggestions for remediating these methodological problems. The addictions considered include alcoholism and drug dependencies. Problems considered are those arising from inadequate, incomplete, or biased reviews of relevant literatures and methodological shortcomings of subject…

Mounting of Biomaterials for Use in Ophthalmic Cell Therapies

PubMed Central

Dunphy, Siobhan E.; Shadforth, Audra M. A.; Dawson, Rebecca A.; Walshe, Jennifer; Zakaria, Nadia

2018-01-01

When used as scaffolds for cell therapies, biomaterials often present basic handling and logistical problems for scientists and surgeons alike. The quest for an appropriate mounting device for biomaterials is therefore a significant and common problem. In this review, we provide a detailed overview of the factors to consider when choosing an appropriate mounting device including those experienced during cell culture, quality assurance, and surgery. By way of example, we draw upon our combined experience in developing epithelial cell therapies for the treatment of eye diseases. We discuss commercially available options for achieving required goals and provide a detailed analysis of 4 experimental designs developed within our respective laboratories in Australia, the United Kingdom, and Belgium. PMID:29338382

Mounting of Biomaterials for Use in Ophthalmic Cell Therapies.

PubMed

Harkin, Damien G; Dunphy, Siobhan E; Shadforth, Audra M A; Dawson, Rebecca A; Walshe, Jennifer; Zakaria, Nadia

2017-11-01

When used as scaffolds for cell therapies, biomaterials often present basic handling and logistical problems for scientists and surgeons alike. The quest for an appropriate mounting device for biomaterials is therefore a significant and common problem. In this review, we provide a detailed overview of the factors to consider when choosing an appropriate mounting device including those experienced during cell culture, quality assurance, and surgery. By way of example, we draw upon our combined experience in developing epithelial cell therapies for the treatment of eye diseases. We discuss commercially available options for achieving required goals and provide a detailed analysis of 4 experimental designs developed within our respective laboratories in Australia, the United Kingdom, and Belgium.

Conquering common breast-feeding problems.

PubMed

Walker, Marsha

2008-01-01

Meeting mothers' personal breast-feeding goals depends on a number of factors, including the timely resolution of any problems she encounters. Nurses are often the first providers who interact with the mother during the perinatal period and are positioned to guide mothers through the prevention and solving of breast-feeding problems. Although many problems may be "common," failure to remedy conditions that cause pain, frustration, and anxiety can lead to premature weaning and avoidance of breast-feeding subsequent children. This article describes strategies and interventions to alleviate common problems that breast-feeding mothers frequently encounter.

Chronic health problems and risk of accidental injury in the workplace: A systematic literature review

PubMed Central

PALMER, K T; HARRIS, E C; COGGON, D

2013-01-01

Objectives To investigate whether common important health conditions and their treatments increase risks of occupational injury. Methods A systematic search was conducted of Medline, Embase and PsycINFO databases from inception to November 2006 employing terms for occupational injury, medications, and a broad range of diseases and impairments. Papers related solely to driving, alcohol, or substance abuse were excluded, as were studies that did not allow analysis of injury risk. For each paper that was retrieved we abstracted standard information on the population, design, exposure(s), outcome(s), response rates, confounders and effect estimates; and rated the quality of information provided. Results We found 38 relevant papers (33 study populations): 16 studies were of cross-sectional design, 13 were case-control and four were prospective. The overall quality was rated as excellent for only two studies. Most commonly investigated were problems of hearing (15 studies), mental health (11 studies) and vision (10 studies). For impaired hearing, neurotic illness, diabetes, epilepsy and use of sedating medication there were moderate positive associations with occupational injury (ORs 1.5–2.0), but there were major gaps in the evidence base. Studies on vision did not present risks by category of eye disease; no evidence was found on psychotic illness; for diabetes, epilepsy and cardiovascular disease there were remarkably few papers; studies seldom distinguished risks by sub-category of external cause or anatomical site and nature of injury; and exposures and outcomes were mostly ascertained by self-report at a single time point, with a lack of clarity about exposure timings. Conclusion Improved research is needed to define the risks of occupational injury arising from common health complaints and treatments. Such research should delineate exposures and outcomes in more detail, and ensure by design that the former precede the latter. PMID:18417559

Interruption as a test of the user-computer interface

NASA Technical Reports Server (NTRS)

Kreifeldt, J. G.; Mccarthy, M. E.

1981-01-01

In order to study the effects different logic systems might have on interrupted operation, an algebraic calculator and a reverse polish notation calculator were compared when trained users were interrupted during problem entry. The RPN calculator showed markedly superior resistance to interruption effects compared to the AN calculator although no significant differences were found when the users were not interrupted. Causes and possible remedies for interruption effects are speculated. It is proposed that because interruption is such a common occurrence, it be incorporated into comparative evaluation tests of different logic system and control/display system and that interruption resistance be adopted as a specific design criteria for such design.

Robust Multivariable Optimization and Performance Simulation for ASIC Design

NASA Technical Reports Server (NTRS)

DuMonthier, Jeffrey; Suarez, George

2013-01-01

Application-specific-integrated-circuit (ASIC) design for space applications involves multiple challenges of maximizing performance, minimizing power, and ensuring reliable operation in extreme environments. This is a complex multidimensional optimization problem, which must be solved early in the development cycle of a system due to the time required for testing and qualification severely limiting opportunities to modify and iterate. Manual design techniques, which generally involve simulation at one or a small number of corners with a very limited set of simultaneously variable parameters in order to make the problem tractable, are inefficient and not guaranteed to achieve the best possible results within the performance envelope defined by the process and environmental requirements. What is required is a means to automate design parameter variation, allow the designer to specify operational constraints and performance goals, and to analyze the results in a way that facilitates identifying the tradeoffs defining the performance envelope over the full set of process and environmental corner cases. The system developed by the Mixed Signal ASIC Group (MSAG) at the Goddard Space Flight Center is implemented as a framework of software modules, templates, and function libraries. It integrates CAD tools and a mathematical computing environment, and can be customized for new circuit designs with only a modest amount of effort as most common tasks are already encapsulated. Customization is required for simulation test benches to determine performance metrics and for cost function computation.

Educational quality and the crisis of educational research

NASA Astrophysics Data System (ADS)

Heyneman, Stephen

1993-11-01

This paper was designed not as a research product but as a speech to comparative education colleagues. It argues that there is a crisis of educational quality in many parts of the world, and that there is a parallel crisis in the quality of educational research and statistics. Compared to other major public responsibilities in health, agriculture, population and family planning, educational statistics are poor and often getting worse. Our international and national statistical institutions are impoverished, and we as a profession have been part of the problem. We have been so busy arguing over differing research paradigms that we have not paid sufficient attention to our common professional responsibilities and common professional goals. The paper suggests that we, as professionals interested in comparative education issues, begin to act together more on these common and important issues.

Developing questionnaires for educational research: AMEE Guide No. 87

PubMed Central

La Rochelle, Jeffrey S.; Dezee, Kent J.; Gehlbach, Hunter

2014-01-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure. PMID:24661014

Developing questionnaires for educational research: AMEE Guide No. 87.

PubMed

Artino, Anthony R; La Rochelle, Jeffrey S; Dezee, Kent J; Gehlbach, Hunter

2014-06-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure.

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

NASA Astrophysics Data System (ADS)

Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

2018-06-01

The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

NASA Astrophysics Data System (ADS)

Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

2018-02-01

The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

Common skin problems in children.

PubMed

Sethuraman, Gomathy; Bhari, Neetu

2014-04-01

Childhood dermatological problems contribute about one-third of all consultations in the setting of both pediatrics and dermatology outpatient services. Skin disorders in children may cause anxiety to parents. General Practitioners should be familiar with the common prevalent skin problems as immediate pediatric dermatology consultation may not be possible. Infections, infestations and dermatitis are the most prevalent diseases among Indian children. The scope of this review is to briefly highlight these common and other important dermatological problems in children.

Attitude control/momentum management and payload pointing in advanced space vehicles

NASA Technical Reports Server (NTRS)

Parlos, Alexander G.; Jayasuriya, Suhada

1990-01-01

The design and evaluation of an attitude control/momentum management system for highly asymmetric spacecraft configurations are presented. The preliminary development and application of a nonlinear control system design methodology for tracking control of uncertain systems, such as spacecraft payload pointing systems are also presented. Control issues relevant to both linear and nonlinear rigid-body spacecraft dynamics are addressed, whereas any structural flexibilities are not taken into consideration. Results from the first task indicate that certain commonly used simplifications in the equations of motions result in unstable attitude control systems, when used for highly asymmetric spacecraft configurations. An approach is suggested circumventing this problem. Additionally, even though preliminary results from the second task are encouraging, the proposed nonlinear control system design method requires further investigation prior to its application and use as an effective payload pointing system design technique.

The Anti-RFI Design of Intelligent Electric Energy Meters with UHF RFID

NASA Astrophysics Data System (ADS)

Chen, Xiangqun; Huang, Rui; Shen, Liman; chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Xu, Renheng

2018-03-01

In order to solve the existing artificial meter reading watt-hour meter industry is still slow and inventory of common problems, using the uhf radio frequency identification (RFID) technology and intelligent watt-hour meter depth fusion, which has a one-time read multiple tags, identification distance, high transmission rate, high reliability, etc, while retaining the original asset management functions, in order to ensure the uhf RFID and minimum impact on the operation of the intelligent watt-hour meter, proposed to improve the stability of the electric meter system while working at the same time, this paper designs the uhf RFID intelligent watt-hour meter radio frequency interference resistance, put forward to improve intelligent watt-hour meter electromagnetic compatibility design train of thought, and introduced its power and the hardware circuit design of printed circuit board, etc.

The association between emotional and behavioral problems and gastrointestinal symptoms among children with high-functioning autism.

PubMed

Mazefsky, Carla A; Schreiber, Dana R; Olino, Thomas M; Minshew, Nancy J

2014-07-01

This study investigated the association between gastrointestinal symptoms and a broad set of emotional and behavioral concerns in 95 children with high-functioning autism and IQ scores ≥ 80. Gastrointestinal symptoms were assessed via the Autism Treatment Network's Gastrointestinal Symptom Inventory, and data were gathered on autism symptom severity, adaptive behavior, and multiple internalizing and externalizing problems. The majority (61%) of children had at least one reported gastrointestinal symptom. Emotional and behavioral problems were also common but with a high degree of variability. Children with and without gastrointestinal problems did not differ in autism symptom severity, adaptive behavior, or total internalizing or externalizing problem scores. However, participants with gastrointestinal problems had significantly higher levels of affective problems. This finding is consistent with a small body of research noting a relationship between gastrointestinal problems, irritability, and mood problems in autism spectrum disorder. More research to identify the mechanisms underlying this relationship in autism spectrum disorder is warranted. Future research should include a medical assessment of gastrointestinal concerns, longitudinal design, and participants with a range of autism spectrum disorder severity in order to clarify the directionality of this relationship and to identify factors that may impact heterogeneity in the behavioral manifestation of gastrointestinal concerns. © The Author(s) 2013.

Robust control of integrated motor-transmission powertrain system over controller area network for automotive applications

NASA Astrophysics Data System (ADS)

Zhu, Xiaoyuan; Zhang, Hui; Cao, Dongpu; Fang, Zongde

2015-06-01

Integrated motor-transmission (IMT) powertrain system with directly coupled motor and gearbox is a good choice for electric commercial vehicles (e.g., pure electric buses) due to its potential in motor size reduction and energy efficiency improvement. However, the controller design for powertrain oscillation damping becomes challenging due to the elimination of damping components. On the other hand, as controller area network (CAN) is commonly adopted in modern vehicle system, the network-induced time-varying delays that caused by bandwidth limitation will further lead to powertrain vibration or even destabilize the powertrain control system. Therefore, in this paper, a robust energy-to-peak controller is proposed for the IMT powertrain system to address the oscillation damping problem and also attenuate the external disturbance. The control law adopted here is based on a multivariable PI control, which ensures the applicability and performance of the proposed controller in engineering practice. With the linearized delay uncertainties characterized by polytopic inclusions, a delay-free closed-loop augmented system is established for the IMT powertrain system under discrete-time framework. The proposed controller design problem is then converted to a static output feedback (SOF) controller design problem where the feedback control gains are obtained by solving a set of linear matrix inequalities (LMIs). The effectiveness as well as robustness of the proposed controller is demonstrated by comparing its performance against that of a conventional PI controller.

Crowdsourcing Participatory Evaluation of Medical Pictograms Using Amazon Mechanical Turk

PubMed Central

Willis, Matt; Sun, Peiyuan; Wang, Jun

2013-01-01

Background Consumer and patient participation proved to be an effective approach for medical pictogram design, but it can be costly and time-consuming. We proposed and evaluated an inexpensive approach that crowdsourced the pictogram evaluation task to Amazon Mechanical Turk (MTurk) workers, who are usually referred to as the “turkers”. Objective To answer two research questions: (1) Is the turkers’ collective effort effective for identifying design problems in medical pictograms? and (2) Do the turkers’ demographic characteristics affect their performance in medical pictogram comprehension? Methods We designed a Web-based survey (open-ended tests) to ask 100 US turkers to type in their guesses of the meaning of 20 US pharmacopeial pictograms. Two judges independently coded the turkers’ guesses into four categories: correct, partially correct, wrong, and completely wrong. The comprehensibility of a pictogram was measured by the percentage of correct guesses, with each partially correct guess counted as 0.5 correct. We then conducted a content analysis on the turkers’ interpretations to identify misunderstandings and assess whether the misunderstandings were common. We also conducted a statistical analysis to examine the relationship between turkers’ demographic characteristics and their pictogram comprehension performance. Results The survey was completed within 3 days of our posting the task to the MTurk, and the collected data are publicly available in the multimedia appendix for download. The comprehensibility for the 20 tested pictograms ranged from 45% to 98%, with an average of 72.5%. The comprehensibility scores of 10 pictograms were strongly correlated to the scores of the same pictograms reported in another study that used oral response–based open-ended testing with local people. The turkers’ misinterpretations shared common errors that exposed design problems in the pictograms. Participant performance was positively correlated with their educational level. Conclusions The results confirmed that crowdsourcing can be used as an effective and inexpensive approach for participatory evaluation of medical pictograms. Through Web-based open-ended testing, the crowd can effectively identify problems in pictogram designs. The results also confirmed that education has a significant effect on the comprehension of medical pictograms. Since low-literate people are underrepresented in the turker population, further investigation is needed to examine to what extent turkers’ misunderstandings overlap with those elicited from low-literate people. PMID:23732572

Crowdsourcing participatory evaluation of medical pictograms using Amazon Mechanical Turk.

PubMed

Yu, Bei; Willis, Matt; Sun, Peiyuan; Wang, Jun

2013-06-03

Consumer and patient participation proved to be an effective approach for medical pictogram design, but it can be costly and time-consuming. We proposed and evaluated an inexpensive approach that crowdsourced the pictogram evaluation task to Amazon Mechanical Turk (MTurk) workers, who are usually referred to as the "turkers". To answer two research questions: (1) Is the turkers' collective effort effective for identifying design problems in medical pictograms? and (2) Do the turkers' demographic characteristics affect their performance in medical pictogram comprehension? We designed a Web-based survey (open-ended tests) to ask 100 US turkers to type in their guesses of the meaning of 20 US pharmacopeial pictograms. Two judges independently coded the turkers' guesses into four categories: correct, partially correct, wrong, and completely wrong. The comprehensibility of a pictogram was measured by the percentage of correct guesses, with each partially correct guess counted as 0.5 correct. We then conducted a content analysis on the turkers' interpretations to identify misunderstandings and assess whether the misunderstandings were common. We also conducted a statistical analysis to examine the relationship between turkers' demographic characteristics and their pictogram comprehension performance. The survey was completed within 3 days of our posting the task to the MTurk, and the collected data are publicly available in the multimedia appendix for download. The comprehensibility for the 20 tested pictograms ranged from 45% to 98%, with an average of 72.5%. The comprehensibility scores of 10 pictograms were strongly correlated to the scores of the same pictograms reported in another study that used oral response-based open-ended testing with local people. The turkers' misinterpretations shared common errors that exposed design problems in the pictograms. Participant performance was positively correlated with their educational level. The results confirmed that crowdsourcing can be used as an effective and inexpensive approach for participatory evaluation of medical pictograms. Through Web-based open-ended testing, the crowd can effectively identify problems in pictogram designs. The results also confirmed that education has a significant effect on the comprehension of medical pictograms. Since low-literate people are underrepresented in the turker population, further investigation is needed to examine to what extent turkers' misunderstandings overlap with those elicited from low-literate people.

Metropolitan Desegregation: The Problems Persist.

ERIC Educational Resources Information Center

Kean, Michael H.

Problems related to school desegregation are identified in this document. The use of the desegregation case study has fallen short of identifying problems common to the desegregation effort. This failure to isolate commonalities is in itself, a major problem. However, before a useful taxonomy can be developed, a list of the most frequently…

A comprehensive program for children with gender variant behaviors and gender identity disorders.

PubMed

Menvielle, Edgardo

2012-01-01

This article describes a clinical program designed to address broadly defined mental health needs of children who experience stress related to not fitting into normative gender types and argues for the need for integrated services that address the spectrum of gender variance. An array of services useful to children and their families is proposed. The article describes the clinical population served, common clinical and social problems, and a rationale for the interventions provided.

Toward Identifying Needed Investments in Modeling and Simulation Tools for NEO Deflection Planning

NASA Technical Reports Server (NTRS)

Adams, Robert B.

2009-01-01

Its time: a) To bring planetary scientists, deflection system investigators and vehicle designers together on the characterization/mitigation problem. b) To develop a comprehensive trade space of options. c) To trade options under a common set of assumptions and see what comparisons on effectiveness can be made. d) To explore the synergy that can be had with proposed scientific and exploration architectures while interest in NEO's are at an all time high.

Efficient optical injection locking of electronic oscillators

NASA Astrophysics Data System (ADS)

Cochran, S. R.; Wang, S. Y.

1989-05-01

The paper presents techniques for direct optical injection locking of electronic oscillators and analyzes the problem of direct optical injection locking of a common-source FET oscillator using a high impedance optoelectronic transducer. A figure-of-merit for optically injection locked oscillators is defined, and an experimental oscillator based on the design criteria was fabricated. The oscillator achieved efficient, high power operation and moderate locking bandwidth with small locking signal magnitude. The experimental results are consistent with the theoretical model.

Waterpipe Smoking among University Students in Sulaimaniyah, Iraqi Kurdistan: Prevalence, Attitudes, and Associated Factors.

PubMed

Othman, Nasih; Kasem, Attallah O; Salih, Faisal A

2017-01-01

Waterpipe smoking is increasingly becoming the most common method of tobacco use among adolescents in the Eastern Mediterranean Region. This study was undertaken in Iraqi Kurdistan to estimate its prevalence among students and investigate attitudes and factors associated with it. In a cross-sectional survey at Sulaimani Polytechnic University, 1160 students were approached in a two-stage design using a self-administered questionnaire. Data was entered into Epidata and analysis was done in Stata. Prevalence of cigarette smoking was 10% and waterpipe smoking was 28% (male 49%, female 10%). Waterpipe smoking was initiated prior to joining the university in 74% of the cases and 22% of waterpipe smokers smoked every day. The most common place for smoking was coffee shops (52%) and 71% of smokers shared the pipe. The significant risk factors were smoking cigarettes (OR 10.3, 95% CI 7.0-15.0), male gender (OR 5.7, 95% CI 3.9-8.2), non-Kurdish ethnicity (OR 3.0, 95% CI 1.6-15.9), city residence (OR 1.5, 95% CI 1.0-2.1), and use of alcohol and other substances (OR 2.8 95% CI 1.4-5.6). Waterpipe smoking is highly prevalent among students in Iraqi Kurdistan, especially among males, and is becoming a public health problem. Tobacco control interventions should be designed specifically to address this problem among adolescents and the youth.

[Development of an integrative cognitive rehabilitation program for brain injured patients in the post-acute stage].

PubMed

Oh, Hyun Soo; Kim, Young Ran; Seo, Wha Sook; Seo, Yeon Ok

2005-04-01

This study was conducted to develop a comprehensive cognitive rehabilitation program that can be easily applied to brain injured patients by family members or nurses in community or hospital settings. A Systemic literature review design was used. Thirty-three related studies were reviewed. Based on the results of the literature review, the training tasks for attention were designated to enhancing 4 hierarchical areas, i.e., focused, selective, alternating, and divided attention. On the other hand, the memory rehabilitation tasks mainly consisted of mnemonic skills, such as the association method which helps patients memorize given information by linking together common attributes, the visual imagery method, and self-instruction method. The problem solving rehabilitation program included a task of games or plays which stimulated the patients' curiosity and interest. The training tasks for problem solving were to encourage the process of deriving reasonable solutions for a problematic situation resembling real problems that the patients were faced with in their everyday life. It is expected that the cognitive rehabilitation program developed from this study could help patients having difficulty in their every day life, due to a reduced cognitive ability resulting from brain injury, to effectively adapt to every day life.

Analyzing the BBOB results by means of benchmarking concepts.

PubMed

Mersmann, O; Preuss, M; Trautmann, H; Bischl, B; Weihs, C

2015-01-01

We present methods to answer two basic questions that arise when benchmarking optimization algorithms. The first one is: which algorithm is the "best" one? and the second one is: which algorithm should I use for my real-world problem? Both are connected and neither is easy to answer. We present a theoretical framework for designing and analyzing the raw data of such benchmark experiments. This represents a first step in answering the aforementioned questions. The 2009 and 2010 BBOB benchmark results are analyzed by means of this framework and we derive insight regarding the answers to the two questions. Furthermore, we discuss how to properly aggregate rankings from algorithm evaluations on individual problems into a consensus, its theoretical background and which common pitfalls should be avoided. Finally, we address the grouping of test problems into sets with similar optimizer rankings and investigate whether these are reflected by already proposed test problem characteristics, finding that this is not always the case.

Clarity of objectives and working principles enhances the success of biomimetic programs.

PubMed

Wolff, Jonas O; Wells, David; Reid, Chris R; Blamires, Sean J

2017-09-26

Biomimetics, the transfer of functional principles from living systems into product designs, is increasingly being utilized by engineers. Nevertheless, recurring problems must be overcome if it is to avoid becoming a short-lived fad. Here we assess the efficiency and suitability of methods typically employed by examining three flagship examples of biomimetic design approaches from different disciplines: (1) the creation of gecko-inspired adhesives; (2) the synthesis of spider silk, and (3) the derivation of computer algorithms from natural self-organizing systems. We find that identification of the elemental working principles is the most crucial step in the biomimetic design process. It bears the highest risk of failure (e.g. losing the target function) due to false assumptions about the working principle. Common problems that hamper successful implementation are: (i) a discrepancy between biological functions and the desired properties of the product, (ii) uncertainty about objectives and applications, (iii) inherent limits in methodologies, and (iv) false assumptions about the biology of the models. Projects that aim for multi-functional products are particularly challenging to accomplish. We suggest a simplification, modularisation and specification of objectives, and a critical assessment of the suitability of the model. Comparative analyses, experimental manipulation, and numerical simulations followed by tests of artificial models have led to the successful extraction of working principles. A searchable database of biological systems would optimize the choice of a model system in top-down approaches that start at an engineering problem. Only when biomimetic projects become more predictable will there be wider acceptance of biomimetics as an innovative problem-solving tool among engineers and industry.

Complexity of GPs' explanations about mental health problems: development, reliability, and validity of a measure

PubMed Central

Cape, John; Morris, Elena; Burd, Mary; Buszewicz, Marta

2008-01-01

Background How GPs understand mental health problems determines their treatment choices; however, measures describing GPs' thinking about such problems are not currently available. Aim To develop a measure of the complexity of GP explanations of common mental health problems and to pilot its reliability and validity. Design of study A qualitative development of the measure, followed by inter-rater reliability and validation pilot studies. Setting General practices in North London. Method Vignettes of simulated consultations with patients with mental health problems were videotaped, and an anchored measure of complexity of psychosocial explanation in response to these vignettes was developed. Six GPs, four psychologists, and two lay people viewed the vignettes. Their responses were rated for complexity, both using the anchored measure and independently by two experts in primary care mental health. In a second reliability and revalidation study, responses of 50 GPs to two vignettes were rated for complexity. The GPs also completed a questionnaire to determine their interest and training in mental health, and they completed the Depression Attitudes Questionnaire. Results Inter-rater reliability of the measure of complexity of explanation in both pilot studies was satisfactory (intraclass correlation coefficient = 0.78 and 0.72). The measure correlated with expert opinion as to what constitutes a complex explanation, and the responses of psychologists, GPs, and lay people differed in measured complexity. GPs with higher complexity scores had greater interest, more training in mental health, and more positive attitudes to depression. Conclusion Results suggest that the complexity of GPs' psychosocial explanations about common mental health problems can be reliably and validly assessed by this new standardised measure. PMID:18505616

Barriers to managing child and adolescent mental health problems: a systematic review of primary care practitioners’ perceptions

PubMed Central

O’Brien, Doireann; Harvey, Kate; Howse, Jessica; Reardon, Tessa; Creswell, Cathy

2016-01-01

Background Mental health problems are common and typically have an early onset. Effective treatments for mental health problems in childhood and adolescence are available, yet only a minority of children who are affected access them. This is of serious concern, considering the far-reaching and long-term negative consequences of such problems. Primary care is usually the first port of call for concerned parents so it is important to understand how primary care practitioners manage child and adolescent mental health problems and the barriers they face. Aim To ascertain primary care practitioners’ perceptions of the barriers that prevent effective management of child and adolescent mental health problems. Design and setting A systematic review of qualitative and quantitative literature in a primary care setting. Method A database search of peer-reviewed articles using PsycINFO, MEDLINE®, Embase, and Web of Science, from inception (earliest 1806) until October 2014, was conducted. Additional studies were identified through hand searches and forward-citation searches. Studies needed to have at least one search term in four categories: primary care, childhood/adolescence, mental health, and barriers. Results A total of 4151 articles were identified, of which 43 were included (30 quantitative studies and 13 qualitative studies). The majority of the barriers related to identification, management, and/or referral. Considerable barriers included a lack of providers and resources, extensive waiting lists, and financial restrictions. Conclusion The identification of a broad range of significant barriers highlights the need to strengthen the ability to deal with these common difficulties in primary care. There is a particular need for tools and training to aid accurate identification and management, and for more efficient access to specialist services. PMID:27621291

[Multifocal intraocular lenses. A review].

PubMed

Auffarth, G U; Dick, H B

2001-02-01

Modern cataract surgery has developed tremendously during the past 10-15 years. Improved surgical techniques, as well as improved implant materials and designs, have enlarged patient profiles and indications for cataract surgery. This also created much higher expectations from the patients' site. The loss of accommodation is loss of quality of life for presbyopic and especially young pseudophakic patients. Therefore cataract surgery with multifocal IOL implantation is not only of academic interest, but reflects demands and expectations of our patients. Multifocal IOLs have been implanted since 1986, starting with 2-3 zone refractive and diffractive designs. Due to surgical techniques of that time MIOL decentration and surgically induced astigmatism were possible complications. In addition reduced contrast sensitivity and increased glare were common problems of MIOL because of their optical principles. New developments in this field in recent years such as the multizonal, progressive refractive MIOL in combination with improved surgical techniques have overcome those initial problems. Therefore, modern multifocal IOLs can be considered not only for correction of aphakia but also for refractive purposes.

Fault Management Practice: A Roadmap for Improvement

NASA Technical Reports Server (NTRS)

Fesq, Lorraine M.; Oberhettinger, David

2010-01-01

Autonomous fault management (FM) is critical for deep space and planetary missions where the limited communication opportunities may prevent timely intervention by ground control. Evidence of pervasive architecture, design, and verification/validation problems with NASA FM engineering has been revealed both during technical reviews of spaceflight missions and in flight. These problems include FM design changes required late in the life-cycle, insufficient project insight into the extent of FM testing required, unexpected test results that require resolution, spacecraft operational limitations because certain functions were not tested, and in-flight anomalies and mission failures attributable to fault management. A recent NASA initiative has characterized the FM state-of-practice throughout the spacecraft development community and identified common NASA, DoD, and commercial concerns that can be addressed in the near term through the development of a FM Practitioner's Handbook and the formation of a FM Working Group. Initial efforts will focus on standardizing FM terminology, establishing engineering processes and tools, and training.

A Behaviour Monitoring System (BMS) for Ambient Assisted Living

PubMed Central

Eisa, Samih

2017-01-01

Unusual changes in the regular daily mobility routine of an elderly person at home can be an indicator or early symptom of developing health problems. Sensor technology can be utilised to complement the traditional healthcare systems to gain a more detailed view of the daily mobility of a person at home when performing everyday tasks. We hypothesise that data collected from low-cost sensors such as presence and occupancy sensors can be analysed to provide insights on the daily mobility habits of the elderly living alone at home and to detect routine changes. We validate this hypothesis by designing a system that automatically learns the daily room-to-room transitions and permanence habits in each room at each time of the day and generates alarm notifications when deviations are detected. We present an algorithm to process the sensors’ data streams and compute sensor-driven features that describe the daily mobility routine of the elderly as part of the developed Behaviour Monitoring System (BMS). We are able to achieve low detection delay with confirmation time that is high enough to convey the detection of a set of common abnormal situations. We illustrate and evaluate BMS with synthetic data, generated by a developed data generator that was designed to mimic different user’s mobility profiles at home, and also with a real-life dataset collected from prior research work. Results indicate BMS detects several mobility changes that can be symptoms of common health problems. The proposed system is a useful approach for learning the mobility habits at the home environment, with the potential to detect behaviour changes that occur due to health problems, and therefore, motivating progress toward behaviour monitoring and elder’s care. PMID:28837105

Applications of numerical methods to simulate the movement of contaminants in groundwater.

PubMed Central

Sun, N Z

1989-01-01

This paper reviews mathematical models and numerical methods that have been extensively used to simulate the movement of contaminants through the subsurface. The major emphasis is placed on the numerical methods of advection-dominated transport problems and inverse problems. Several mathematical models that are commonly used in field problems are listed. A variety of numerical solutions for three-dimensional models are introduced, including the multiple cell balance method that can be considered a variation of the finite element method. The multiple cell balance method is easy to understand and convenient for solving field problems. When the advection transport dominates the dispersion transport, two kinds of numerical difficulties, overshoot and numerical dispersion, are always involved in solving standard, finite difference methods and finite element methods. To overcome these numerical difficulties, various numerical techniques are developed, such as upstream weighting methods and moving point methods. A complete review of these methods is given and we also mention the problems of parameter identification, reliability analysis, and optimal-experiment design that are absolutely necessary for constructing a practical model. PMID:2695327

Overview of the Photovoltaic Manufacturing Technology (PVMaT) project

NASA Astrophysics Data System (ADS)

Witt, C. E.; Mitchell, R. L.; Mooney, G. D.

1993-08-01

The Photovoltaic Manufacturing Technology (PVMaT) project is a historic government/industry photovoltaic (PV) manufacturing R&D partnership composed of joint efforts between the federal government (through the US Department of Energy) and members of the US PV industry. The project's ultimate goal is to ensure that the US industry retains and extends its world leadership role in the manufacture and commercial development of PV components and systems. PVMaT is designed to do this by helping the US PV industry improve manufacturing processes, accelerate manufacturing cost reductions for PV modules, improve commercial product performance, and lay the groundwork for a substantial scale-up of US-based PV manufacturing capacities. Phase 1 of the project, the problem identification phase, was completed in early 1991. Phase 2, the problem solution phase, which addresses process-specific problems of specific manufacturers, is now underway with an expected duration of 5 years. Phase 3 addresses R&D problems that are relatively common to a number of PV companies or the PV industry as a whole. These 'generic' problem areas are being addressed through a teamed research approach.

Evaluation of creative problem-solving abilities in undergraduate structural engineers through interdisciplinary problem-based learning

NASA Astrophysics Data System (ADS)

McCrum, Daniel Patrick

2017-11-01

For a structural engineer, effective communication and interaction with architects cannot be underestimated as a key skill to success throughout their professional career. Structural engineers and architects have to share a common language and understanding of each other in order to achieve the most desirable architectural and structural designs. This interaction and engagement develops during their professional career but needs to be nurtured during their undergraduate studies. The objective of this paper is to present the strategies employed to engage higher order thinking in structural engineering students in order to help them solve complex problem-based learning (PBL) design scenarios presented by architecture students. The strategies employed were applied in the experimental setting of an undergraduate module in structural engineering at Queen's University Belfast in the UK. The strategies employed were active learning to engage with content knowledge, the use of physical conceptual structural models to reinforce key concepts and finally, reinforcing the need for hand sketching of ideas to promote higher order problem-solving. The strategies employed were evaluated through student survey, student feedback and module facilitator (this author) reflection. The strategies were qualitatively perceived by the tutor and quantitatively evaluated by students in a cross-sectional study to help interaction with the architecture students, aid interdisciplinary learning and help students creatively solve problems (through higher order thinking). The students clearly enjoyed this module and in particular interacting with structural engineering tutors and students from another discipline.

Population-based metaheuristic optimization in neutron optics and shielding design

NASA Astrophysics Data System (ADS)

DiJulio, D. D.; Björgvinsdóttir, H.; Zendler, C.; Bentley, P. M.

2016-11-01

Population-based metaheuristic algorithms are powerful tools in the design of neutron scattering instruments and the use of these types of algorithms for this purpose is becoming more and more commonplace. Today there exists a wide range of algorithms to choose from when designing an instrument and it is not always initially clear which may provide the best performance. Furthermore, due to the nature of these types of algorithms, the final solution found for a specific design scenario cannot always be guaranteed to be the global optimum. Therefore, to explore the potential benefits and differences between the varieties of these algorithms available, when applied to such design scenarios, we have carried out a detailed study of some commonly used algorithms. For this purpose, we have developed a new general optimization software package which combines a number of common metaheuristic algorithms within a single user interface and is designed specifically with neutronic calculations in mind. The algorithms included in the software are implementations of Particle-Swarm Optimization (PSO), Differential Evolution (DE), Artificial Bee Colony (ABC), and a Genetic Algorithm (GA). The software has been used to optimize the design of several problems in neutron optics and shielding, coupled with Monte-Carlo simulations, in order to evaluate the performance of the various algorithms. Generally, the performance of the algorithms depended on the specific scenarios, however it was found that DE provided the best average solutions in all scenarios investigated in this work.

Development of common neural representations for distinct numerical problems

PubMed Central

Chang, Ting-Ting; Rosenberg-Lee, Miriam; Metcalfe, Arron W. S.; Chen, Tianwen; Menon, Vinod

2015-01-01

How the brain develops representations for abstract cognitive problems is a major unaddressed question in neuroscience. Here we tackle this fundamental question using arithmetic problem solving, a cognitive domain important for the development of mathematical reasoning. We first examined whether adults demonstrate common neural representations for addition and subtraction problems, two complementary arithmetic operations that manipulate the same quantities. We then examined how the common neural representations for the two problem types change with development. Whole-brain multivoxel representational similarity (MRS) analysis was conducted to examine common coding of addition and subtraction problems in children and adults. We found that adults exhibited significant levels of MRS between the two problem types, not only in the intra-parietal sulcus (IPS) region of the posterior parietal cortex (PPC), but also in ventral temporal-occipital, anterior temporal and dorsolateral prefrontal cortices. Relative to adults, children showed significantly reduced levels of MRS in these same regions. In contrast, no brain areas showed significantly greater MRS between problem types in children. Our findings provide novel evidence that the emergence of arithmetic problem solving skills from childhood to adulthood is characterized by maturation of common neural representations between distinct numerical operations, and involve distributed brain regions important for representing and manipulating numerical quantity. More broadly, our findings demonstrate that representational analysis provides a powerful approach for uncovering fundamental mechanisms by which children develop proficiencies that are a hallmark of human cognition. PMID:26160287

Reflecting on non-reflective action: An exploratory think-aloud study of self-report habit measures

PubMed Central

Gardner, Benjamin; Tang, Vinca

2014-01-01

Objectives Within health psychology, habit – the tendency to enact action automatically as a learned response to contextual cues – is most commonly quantified using the ‘Self-Report Habit Index’, which assesses behavioural automaticity, or measures combining self-reported behaviour frequency and context stability. Yet, the use of self-report to capture habit has proven controversial. This study used ‘think-aloud’ methods to investigate problems experienced when completing these two measures. Design Cross-sectional survey with think-aloud study. Methods Twenty student participants narrated their thoughts while completing habit measures applied to four health-related behaviours (active commuting, unhealthy snacking, and one context-free and one context-specific variant of alcohol consumption). Data were coded using thematic analysis procedures. Results Problems were found in 10% of responses. Notable findings included participants lacking confidence in reporting automaticity, struggling to recall behaviour or cues, differing in interpretations of ‘commuting’, and misinterpreting items. Conclusions While most responses were unproblematic, and further work is needed to investigate habit self-reports among larger and more diverse samples, findings nonetheless question the sensitivity of the measures, and the conceptualization of habit underpinning common applications of them. We offer suggestions to minimize these problems. PMID:23869847

The Effectiveness of Mobile Phone Text Messaging in Improving Medication Adherence for Patients with Chronic Diseases: A Systematic Review.

PubMed

Ershad Sarabi, Roghayeh; Sadoughi, Farahnaz; Jamshidi Orak, Roohangiz; Bahaadinbeigy, Kambiz

2016-05-01

Medication non-adherence is a commonly observed problem in the self-administration of treatment, regardless of the disease type. Text messaging reminders, as electronic reminders, provide an opportunity to improve medication adherence. In this study, we aimed to provide evidence addressing the question of whether text message reminders were effective in improving patients' adherence to medication. We carried out a systematic literature search, using the five electronic bibliographic databases: PubMed, Embase, PsycINFO, CINAHL, and the Cochrane central register of controlled trials. Studies were included on the basis of whether they examined the benefits and effects of short-message service (SMS) interventions on medication adherence. The results of this systematic review indicated that text messaging interventions have improved patients' medication adherence rate (85%, 29.34). Included in the review, those who had problems with adherence, or those whom text messaging was most helpful had HIV, asthma, diabetes, schizophrenia and heart disease (73.5%). The period of intervention varied from 1 week to 14 months. The most common study design was randomized controlled trials (RCTs) (66%) carried out in the developed countries. This study demonstrated the potential of mobile phone text messaging for medication non-adherence problem solving.

Examples of landscape indicators for assessing environmental conditions and problems in urban and suburban areas

USGS Publications Warehouse

Martin-Duque, J. F.; Godfrey, A.; Diez, A.; Cleaves, E.; Pedraza, J.; Sanz, M.A.; Carrasco, R.M.; Bodoque, J.; Brebbia, C.A.; Martin-Duque, J.F.; Wadhwa, L.C.

2002-01-01

Geo-indicators can help to assess environmental conditions in city urban and suburban areas. Those indicators should be meaningful for understanding environmental changes. From examples of Spanish and American cities, geo-indicators for assessing environmental conditions and changes in urban and suburban areas are proposed. The paper explore two types of geo-indicators. The first type presents general information that can be used to indicate the presence of a broad array of geologic conditions, either favouring or limiting various kinds of uses of the land. The second type of geo-indicator is the one most commonly used, and as a group most easily understood; these are site and problem specific and they are generally used after a problem is identified. Among them, watershed processes, seismicity and physiographic diversity are explained in more detail. A second dimension that is considered when discussing geo-indicators is the issue of scale. Broad scale investigations, covering extensive areas are only efficient at cataloguing general conditions common to much of the area or some outstanding feature within the area. This type of information is best used for policy type decisions. Detailed scale investigations can provide information about local conditions, but are not efficient at cataloguing vast areas. Information gathered at the detailed level is necessary for project design and construction.

Stride search: A general algorithm for storm detection in high resolution climate data

DOE PAGES

Bosler, Peter Andrew; Roesler, Erika Louise; Taylor, Mark A.; ...

2015-09-08

This article discusses the problem of identifying extreme climate events such as intense storms within large climate data sets. The basic storm detection algorithm is reviewed, which splits the problem into two parts: a spatial search followed by a temporal correlation problem. Two specific implementations of the spatial search algorithm are compared. The commonly used grid point search algorithm is reviewed, and a new algorithm called Stride Search is introduced. Stride Search is designed to work at all latitudes, while grid point searches may fail in polar regions. Results from the two algorithms are compared for the application of tropicalmore » cyclone detection, and shown to produce similar results for the same set of storm identification criteria. The time required for both algorithms to search the same data set is compared. Furthermore, Stride Search's ability to search extreme latitudes is demonstrated for the case of polar low detection.« less

Solid-perforated panel layout optimization by topology optimization based on unified transfer matrix.

PubMed

Kim, Yoon Jae; Kim, Yoon Young

2010-10-01

This paper presents a numerical method for the optimization of the sequencing of solid panels, perforated panels and air gaps and their respective thickness for maximizing sound transmission loss and/or absorption. For the optimization, a method based on the topology optimization formulation is proposed. It is difficult to employ only the commonly-used material interpolation technique because the involved layers exhibit fundamentally different acoustic behavior. Thus, an optimization method formulation using a so-called unified transfer matrix is newly proposed. The key idea is to form elements of the transfer matrix such that interpolated elements by the layer design variables can be those of air, perforated and solid panel layers. The problem related to the interpolation is addressed and bench mark-type problems such as sound transmission or absorption maximization problems are solved to check the efficiency of the developed method.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bosler, Peter Andrew; Roesler, Erika Louise; Taylor, Mark A.

This article discusses the problem of identifying extreme climate events such as intense storms within large climate data sets. The basic storm detection algorithm is reviewed, which splits the problem into two parts: a spatial search followed by a temporal correlation problem. Two specific implementations of the spatial search algorithm are compared. The commonly used grid point search algorithm is reviewed, and a new algorithm called Stride Search is introduced. Stride Search is designed to work at all latitudes, while grid point searches may fail in polar regions. Results from the two algorithms are compared for the application of tropicalmore » cyclone detection, and shown to produce similar results for the same set of storm identification criteria. The time required for both algorithms to search the same data set is compared. Furthermore, Stride Search's ability to search extreme latitudes is demonstrated for the case of polar low detection.« less

A model for group counseling with male pedophiles.

PubMed

van Zessen, G

1990-01-01

Group treatment programs for pedophiles are often designed for populations of convicted men in closed institutions with limited application to other populations. Treatment is usually focused on reducing the "deviant" sexual arousal and/or acquiring heterosocial skills and eventually establishing the ability to engage in adult heterosexual relationships. A six-week, highly structured program is presented to five men in a non-residential setting. In addition to individual psychotherapy, group counseling is offered. Male pedophiles are trained to talk effectively about common problems surrounding man-boy relationships. Counseling is based on the notion that the emotional, erotic and sexual attraction to boys per se does not need to be legitimized or modified. The attraction, however, can be a source of psychological and social problems that can be handled by using a social support system. Social support for pedophile problems can be obtained from and in interaction with other pedophiles.

The Early Interventionist and the Medical Problems of the Child with Down Syndrome.

ERIC Educational Resources Information Center

Roizen, Nancy J.

2003-01-01

This article describes medical problems that occur more frequently in young children with Down syndrome. These include common cardiac, hearing, and vision problems and less common thyroid and celiac diseases. Guidelines for preventing dental and obesity problems are followed by suggestions to early interventionists for watching for leukemia, neck…

Active colloids with collective mobility status and research opportunities.

PubMed

Zhang, Jie; Luijten, Erik; Grzybowski, Bartosz A; Granick, Steve

2017-09-18

The collective mobility of active matter (self-propelled objects that transduce energy into mechanical work to drive their motion, most commonly through fluids) constitutes a new frontier in science and achievable technology. This review surveys the current status of the research field, what kinds of new scientific problems can be tackled in the short term, and what long-term directions are envisioned. We focus on: (1) attempts to formulate design principles to tailor active particles; (2) attempts to design principles according to which active particles interact under circumstances where particle-particle interactions of traditional colloid science are augmented by a family of nonequilibrium effects discussed here; (3) attempts to design intended patterns of collective behavior and dynamic assembly; (4) speculative links to equilibrium thermodynamics. In each aspect, we assess achievements, limitations, and research opportunities.

KSC-07pd0621

NASA Image and Video Library

2007-03-09

KENNEDY SPACE CENTER, FLA. -- During the FIRST robotics event held at the University of Central Florida Arena March 8-10, Center Director Bill Parsons talks to the NASA-sponsored team, known as the Pink Team, from Rockledge, Cocoa Beach and Viera High Schools in Central Florida. The FIRST, or For Inspiration and Recognition of Science and Technology, Robotics Competition challenges teams of young people and their mentors to solve a common problem in a six-week timeframe using a standard "kit of parts" and a common set of rules. Teams build robots from the parts and enter them in a series of competitions designed by FIRST founder Dean Kamen and Dr. Woodie Flowers, chairman and vice chairman of the Executive Advisory Board respectively, and a committee of engineers and other professionals. FIRST redefines winning for these students. Teams are rewarded for excellence in design, demonstrated team spirit, gracious professionalism and maturity, and ability to overcome obstacles. Scoring the most points is a secondary goal. Winning means building partnerships that last. Photo credit: NASA/Kim Shiflett

KSC-07pd0613

NASA Image and Video Library

2007-03-09

KENNEDY SPACE CENTER, FLA. -- Student teams representing Florida and several out-of-state areas display and work on their robots for the FIRST robotics event held at the University of Central Florida Arena March 8-10. The FIRST, or For Inspiration and Recognition of Science and Technology, Robotics Competition challenges teams of young people and their mentors to solve a common problem in a six-week timeframe using a standard "kit of parts" and a common set of rules. Teams build robots from the parts and enter them in a series of competitions designed by FIRST founder Dean Kamen and Dr. Woodie Flowers, chairman and vice chairman of the Executive Advisory Board respectively, and a committee of engineers and other professionals. FIRST redefines winning for these students. Teams are rewarded for excellence in design, demonstrated team spirit, gracious professionalism and maturity, and ability to overcome obstacles. Scoring the most points is a secondary goal. Winning means building partnerships that last. Photo credit: NASA/Kim Shiflett

KSC-07pd0622

NASA Image and Video Library

2007-03-09

KENNEDY SPACE CENTER, FLA. -- Center Director Bill Parsons (left) greets the Lt. Governor of the State of Florida, Jeff Kottkamp, at the FIRST robotics event held at the University of Central Florida Arena March 8-10. The FIRST, or For Inspiration and Recognition of Science and Technology, Robotics Competition challenges teams of young people and their mentors to solve a common problem in a six-week timeframe using a standard "kit of parts" and a common set of rules. Teams build robots from the parts and enter them in a series of competitions designed by FIRST founder Dean Kamen and Dr. Woodie Flowers, chairman and vice chairman of the Executive Advisory Board respectively, and a committee of engineers and other professionals. FIRST redefines winning for these students. Teams are rewarded for excellence in design, demonstrated team spirit, gracious professionalism and maturity, and ability to overcome obstacles. Scoring the most points is a secondary goal. Winning means building partnerships that last. Photo credit: NASA/Kim Shiflett

KSC-07pd0611

NASA Image and Video Library

2007-03-09

KENNEDY SPACE CENTER, FLA. -- A Kissimmee, Fla., team (right) prepares its robot for competition with a New Jersey team (center) during the FIRST robotics event held at the University of Central Florida Arena March 8-10. The FIRST, or For Inspiration and Recognition of Science and Technology, Robotics Competition challenges teams of young people and their mentors to solve a common problem in a six-week timeframe using a standard "kit of parts" and a common set of rules. Teams build robots from the parts and enter them in a series of competitions designed by FIRST founder Dean Kamen and Dr. Woodie Flowers, chairman and vice chairman of the Executive Advisory Board respectively, and a committee of engineers and other professionals. FIRST redefines winning for these students. Teams are rewarded for excellence in design, demonstrated team spirit, gracious professionalism and maturity, and ability to overcome obstacles. Scoring the most points is a secondary goal. Winning means building partnerships that last. Photo credit: NASA/Kim Shiflett

KSC-2011-2268

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – The Pink Team participates in the regional FIRST robotics competition at the University of Central Florida in Orlando. The team is made up of students from Rockledge, Cocoa Beach and Viera high schools along the Space Coast of Florida. NASA’s Kennedy Space Center is a sponsor of the team. The Pink Team finished sixth in the competition called "For Inspiration and Recognition of Science and Technology," or FIRST, among about 60 high school teams hoping to advance to the national robotics championship. The team also took home the Industrial Design Award sponsored by General Motors. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

KSC-2011-2258

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – The Pink Team participates in the regional FIRST robotics competition at the University of Central Florida in Orlando. The team is made up of students from Rockledge, Cocoa Beach and Viera high schools along the Space Coast of Florida. NASA’s Kennedy Space Center is a sponsor of the team. The Pink Team finished sixth in the competition called "For Inspiration and Recognition of Science and Technology," or FIRST, among about 60 high school teams hoping to advance to the national robotics championship. The team also took home the Industrial Design Award sponsored by General Motors. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

KSC-2011-2263

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – NASA Kennedy Space Center Director Bob Cabana checks out the robot designed by the Bionic Tigers team at the regional FIRST robotics competition at the University of Central Florida in Orlando. The team is made up of students from Cocoa High School and Holy Trinity Episcopal Academy along the Space Coast in Florida. NASA's Launch Services Program based at Kennedy is a sponsor of the team. The Bionic Tigers finished seventh in the competition called "For Inspiration and Recognition of Science and Technology," or FIRST, among about 60 high school teams hoping to advance to the national robotics championship. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

KSC-2011-2269

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – The Pink Team participates in the regional FIRST robotics competition at the University of Central Florida in Orlando. The team is made up of students from Rockledge, Cocoa Beach and Viera high schools along the Space Coast of Florida. NASA’s Kennedy Space Center is a sponsor of the team. The Pink Team finished sixth in the competition called "For Inspiration and Recognition of Science and Technology," or FIRST, among about 60 high school teams hoping to advance to the national robotics championship. The team also took home the Industrial Design Award sponsored by General Motors. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

KSC-2011-2257

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – The Pink Team participates in the regional FIRST robotics competition at the University of Central Florida in Orlando. The team is made up of students from Rockledge, Cocoa Beach and Viera high schools along the Space Coast of Florida. NASA’s Kennedy Space Center is a sponsor of the team. The Pink Team finished sixth in the competition called "For Inspiration and Recognition of Science and Technology," or FIRST, among about 60 high school teams hoping to advance to the national robotics championship. The team also took home the Industrial Design Award sponsored by General Motors. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

KSC-2011-2252

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – The Pink Team participates in the regional FIRST robotics competition at the University of Central Florida in Orlando. The team is made up of students from Rockledge, Cocoa Beach and Viera high schools along the Space Coast of Florida. NASA’s Kennedy Space Center is a sponsor of the team. The Pink Team finished sixth in the competition called "For Inspiration and Recognition of Science and Technology," or FIRST, among about 60 high school teams hoping to advance to the national robotics championship. The team also took home the Industrial Design Award sponsored by General Motors. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

KSC-2011-2267

NASA Image and Video Library

2011-03-11

ORLANDO, Fla. – The Pink Team participates in the regional FIRST robotics competition at the University of Central Florida in Orlando. The team is made up of students from Rockledge, Cocoa Beach and Viera high schools along the Space Coast of Florida. NASA’s Kennedy Space Center is a sponsor of the team. The Pink Team finished sixth in the competition called "For Inspiration and Recognition of Science and Technology," or FIRST, among about 60 high school teams hoping to advance to the national robotics championship. The team also took home the Industrial Design Award sponsored by General Motors. FIRST, founded in 1989, is a non-profit organization that designs accessible, innovative programs to build self-confidence, knowledge and life skills while motivating young people to pursue academic opportunities. The robotics competition challenges teams of high school students and their mentors to solve a common problem in a six-week timeframe using a standard kit of parts and a common set of rules. Photo credit: NASA/Glenn Benson

A practical model for pressure probe system response estimation (with review of existing models)

NASA Astrophysics Data System (ADS)

Hall, B. F.; Povey, T.

2018-04-01

The accurate estimation of the unsteady response (bandwidth) of pneumatic pressure probe systems (probe, line and transducer volume) is a common practical problem encountered in the design of aerodynamic experiments. Understanding the bandwidth of the probe system is necessary to capture unsteady flow features accurately. Where traversing probes are used, the desired traverse speed and spatial gradients in the flow dictate the minimum probe system bandwidth required to resolve the flow. Existing approaches for bandwidth estimation are either complex or inaccurate in implementation, so probes are often designed based on experience. Where probe system bandwidth is characterized, it is often done experimentally, requiring careful experimental set-up and analysis. There is a need for a relatively simple but accurate model for estimation of probe system bandwidth. A new model is presented for the accurate estimation of pressure probe bandwidth for simple probes commonly used in wind tunnel environments; experimental validation is provided. An additional, simple graphical method for air is included for convenience.

KSC-07pd0614

NASA Image and Video Library

2007-03-09

KENNEDY SPACE CENTER, FLA. -- Competing robots try to loop the large metal target with colored rings. The robots are products of student teams taking part in the FIRST robotics event held at the University of Central Florida Arena March 8-10. The FIRST, or For Inspiration and Recognition of Science and Technology, Robotics Competition challenges teams of young people and their mentors to solve a common problem in a six-week timeframe using a standard "kit of parts" and a common set of rules. Teams build robots from the parts and enter them in a series of competitions designed by FIRST founder Dean Kamen and Dr. Woodie Flowers, chairman and vice chairman of the Executive Advisory Board respectively, and a committee of engineers and other professionals. FIRST redefines winning for these students. Teams are rewarded for excellence in design, demonstrated team spirit, gracious professionalism and maturity, and ability to overcome obstacles. Scoring the most points is a secondary goal. Winning means building partnerships that last. Photo credit: NASA/Kim Shiflett

KSC-07pd0612

NASA Image and Video Library

2007-03-09

KENNEDY SPACE CENTER, FLA. -- Competing robots try to loop the large meta target with colored rings. The robots are products of student teams taking part in the FIRST robotics event held at the University of Central Florida Arena March 8-10. The FIRST, or For Inspiration and Recognition of Science and Technology, Robotics Competition challenges teams of young people and their mentors to solve a common problem in a six-week timeframe using a standard "kit of parts" and a common set of rules. Teams build robots from the parts and enter them in a series of competitions designed by FIRST founder Dean Kamen and Dr. Woodie Flowers, chairman and vice chairman of the Executive Advisory Board respectively, and a committee of engineers and other professionals. FIRST redefines winning for these students. Teams are rewarded for excellence in design, demonstrated team spirit, gracious professionalism and maturity, and ability to overcome obstacles. Scoring the most points is a secondary goal. Winning means building partnerships that last. Photo credit: NASA/Kim Shiflett

Radiology Reporting System Data Exchange With the Electronic Health Record System: A Case Study in Iran.

PubMed

Ahmadi, Maryam; Ghazisaeidi, Marjan; Bashiri, Azadeh

2015-03-18

In order to better designing of electronic health record system in Iran, integration of health information systems based on a common language must be done to interpret and exchange this information with this system is required. This study provides a conceptual model of radiology reporting system using unified modeling language. The proposed model can solve the problem of integration this information system with the electronic health record system. By using this model and design its service based, easily connect to electronic health record in Iran and facilitate transfer radiology report data. This is a cross-sectional study that was conducted in 2013. The study population was 22 experts that working at the Imaging Center in Imam Khomeini Hospital in Tehran and the sample was accorded with the community. Research tool was a questionnaire that prepared by the researcher to determine the information requirements. Content validity and test-retest method was used to measure validity and reliability of questioner respectively. Data analyzed with average index, using SPSS. Also Visual Paradigm software was used to design a conceptual model. Based on the requirements assessment of experts and related texts, administrative, demographic and clinical data and radiological examination results and if the anesthesia procedure performed, anesthesia data suggested as minimum data set for radiology report and based it class diagram designed. Also by identifying radiology reporting system process, use case was drawn. According to the application of radiology reports in electronic health record system for diagnosing and managing of clinical problem of the patient, with providing the conceptual Model for radiology reporting system; in order to systematically design it, the problem of data sharing between these systems and electronic health records system would eliminate.

Design search and optimization in aerospace engineering.

PubMed

Keane, A J; Scanlan, J P

2007-10-15

In this paper, we take a design-led perspective on the use of computational tools in the aerospace sector. We briefly review the current state-of-the-art in design search and optimization (DSO) as applied to problems from aerospace engineering, focusing on those problems that make heavy use of computational fluid dynamics (CFD). This ranges over issues of representation, optimization problem formulation and computational modelling. We then follow this with a multi-objective, multi-disciplinary example of DSO applied to civil aircraft wing design, an area where this kind of approach is becoming essential for companies to maintain their competitive edge. Our example considers the structure and weight of a transonic civil transport wing, its aerodynamic performance at cruise speed and its manufacturing costs. The goals are low drag and cost while holding weight and structural performance at acceptable levels. The constraints and performance metrics are modelled by a linked series of analysis codes, the most expensive of which is a CFD analysis of the aerodynamics using an Euler code with coupled boundary layer model. Structural strength and weight are assessed using semi-empirical schemes based on typical airframe company practice. Costing is carried out using a newly developed generative approach based on a hierarchical decomposition of the key structural elements of a typical machined and bolted wing-box assembly. To carry out the DSO process in the face of multiple competing goals, a recently developed multi-objective probability of improvement formulation is invoked along with stochastic process response surface models (Krigs). This approach both mitigates the significant run times involved in CFD computation and also provides an elegant way of balancing competing goals while still allowing the deployment of the whole range of single objective optimizers commonly available to design teams.

Intelligent Machine Learning Approaches for Aerospace Applications

NASA Astrophysics Data System (ADS)

Sathyan, Anoop

Machine Learning is a type of artificial intelligence that provides machines or networks the ability to learn from data without the need to explicitly program them. There are different kinds of machine learning techniques. This thesis discusses the applications of two of these approaches: Genetic Fuzzy Logic and Convolutional Neural Networks (CNN). Fuzzy Logic System (FLS) is a powerful tool that can be used for a wide variety of applications. FLS is a universal approximator that reduces the need for complex mathematics and replaces it with expert knowledge of the system to produce an input-output mapping using If-Then rules. The expert knowledge of a system can help in obtaining the parameters for small-scale FLSs, but for larger networks we will need to use sophisticated approaches that can automatically train the network to meet the design requirements. This is where Genetic Algorithms (GA) and EVE come into the picture. Both GA and EVE can tune the FLS parameters to minimize a cost function that is designed to meet the requirements of the specific problem. EVE is an artificial intelligence developed by Psibernetix that is trained to tune large scale FLSs. The parameters of an FLS can include the membership functions and rulebase of the inherent Fuzzy Inference Systems (FISs). The main issue with using the GFS is that the number of parameters in a FIS increase exponentially with the number of inputs thus making it increasingly harder to tune them. To reduce this issue, the FLSs discussed in this thesis consist of 2-input-1-output FISs in cascade (Chapter 4) or as a layer of parallel FISs (Chapter 7). We have obtained extremely good results using GFS for different applications at a reduced computational cost compared to other algorithms that are commonly used to solve the corresponding problems. In this thesis, GFSs have been designed for controlling an inverted double pendulum, a task allocation problem of clustering targets amongst a set of UAVs, a fire detection problem and the aircraft conflict resolution problem. During the last decade, CNNs have become increasingly popular in the domain of image and speech processing. CNNs have a lot more parameters compared to GFSs that are tuned using the back-propagation algorithm. CNNs typically have hundreds of thousands or maybe millions of parameters that are tuned using common cost functions such as integral squared error, softmax loss etc. Chapter 5 discusses a classification problem to classify images as humans or not and Chapter 6 discusses a regression task using CNN for producing an approximate near-optimal route for the Traveling Salesman Problem (TSP) which is regarded as one of the most complicated decision making problem. Both the GFS and CNN are used to develop intelligent systems specific to the application providing them computational efficiency, robustness in the face of uncertainties and scalability.

Off-Grid Direction of Arrival Estimation Based on Joint Spatial Sparsity for Distributed Sparse Linear Arrays

PubMed Central

Liang, Yujie; Ying, Rendong; Lu, Zhenqi; Liu, Peilin

2014-01-01

In the design phase of sensor arrays during array signal processing, the estimation performance and system cost are largely determined by array aperture size. In this article, we address the problem of joint direction-of-arrival (DOA) estimation with distributed sparse linear arrays (SLAs) and propose an off-grid synchronous approach based on distributed compressed sensing to obtain larger array aperture. We focus on the complex source distribution in the practical applications and classify the sources into common and innovation parts according to whether a signal of source can impinge on all the SLAs or a specific one. For each SLA, we construct a corresponding virtual uniform linear array (ULA) to create the relationship of random linear map between the signals respectively observed by these two arrays. The signal ensembles including the common/innovation sources for different SLAs are abstracted as a joint spatial sparsity model. And we use the minimization of concatenated atomic norm via semidefinite programming to solve the problem of joint DOA estimation. Joint calculation of the signals observed by all the SLAs exploits their redundancy caused by the common sources and decreases the requirement of array size. The numerical results illustrate the advantages of the proposed approach. PMID:25420150

Power system market implementation in a deregulated environment

NASA Astrophysics Data System (ADS)

Silva, Carlos

2000-10-01

The opening of the power system markets (also known as deregulation) gives rise to issues never seen before by this industry. One of the most important is the control of information about the cost of generation. Information that used to be common knowledge is now kept private by the new agents of the system (generator companies, distribution companies, etc.). Data such as the generator cost functions are now known only by the owning companies. The result is a new system consisting of a group of independent firms seeking the maximization of their own profit. There have been many proposals to organize the new market in an economically efficient manner. Nevertheless, the uniqueness of the electric power system has prevented the development of such a market. This thesis evaluates the most common proposals using simulations in an auction setting. In addition a new methodology is proposed based on mechanism design, a common technique in economics, that solves some of the practical problems of power system markets (such as the management of limited transmission capacity). In this methodology, when each company acts in its best interest, the outcome is efficient in spite of the information problem cited above. This new methodology, along with the existing methodologies, are tested using simulation and analyzed to create a clear comparison of benefits and disadvantages.

Speed synchronization control for integrated automotive motor-transmission powertrain system with random delays

NASA Astrophysics Data System (ADS)

Zhu, Xiaoyuan; Zhang, Hui; Fang, Zongde

2015-12-01

This paper presents a robust speed synchronization controller design for an integrated motor-transmission powertrain system in which the driving motor and multi-gearbox are directly coupled. As the controller area network (CAN) is commonly used in the vehicle powertrain system, the possible network-induced random delays in both feedback and forward channel are considered and modeled by using two Markov chains in the controller design process. For the application perspective, the control law adopted here is a generalized proportional-integral (PI) control. By employing the system-augmentation technique, a delay-free stochastic closed-loop system is obtained and the generalized PI controller design problem is converted to a static output feedback (SOF) controller design problem. Since there are external disturbances involved in the closed-loop system, the energy-to-peak performance is considered to guarantee the robustness of the controller. And the controlled output is chosen as the speed synchronization error. To further improve the transient response of the closed-loop system, the pole placement is also employed in the energy-to-peak performance based speed synchronization control. The mode-dependent control gains are obtained by using an iterative linear matrix inequality (LMI) algorithm. Simulation results show the effectiveness of the proposed control approach.

Increasing value and reducing waste in research design, conduct, and analysis.

PubMed

Ioannidis, John P A; Greenland, Sander; Hlatky, Mark A; Khoury, Muin J; Macleod, Malcolm R; Moher, David; Schulz, Kenneth F; Tibshirani, Robert

2014-01-11

Correctable weaknesses in the design, conduct, and analysis of biomedical and public health research studies can produce misleading results and waste valuable resources. Small effects can be difficult to distinguish from bias introduced by study design and analyses. An absence of detailed written protocols and poor documentation of research is common. Information obtained might not be useful or important, and statistical precision or power is often too low or used in a misleading way. Insufficient consideration might be given to both previous and continuing studies. Arbitrary choice of analyses and an overemphasis on random extremes might affect the reported findings. Several problems relate to the research workforce, including failure to involve experienced statisticians and methodologists, failure to train clinical researchers and laboratory scientists in research methods and design, and the involvement of stakeholders with conflicts of interest. Inadequate emphasis is placed on recording of research decisions and on reproducibility of research. Finally, reward systems incentivise quantity more than quality, and novelty more than reliability. We propose potential solutions for these problems, including improvements in protocols and documentation, consideration of evidence from studies in progress, standardisation of research efforts, optimisation and training of an experienced and non-conflicted scientific workforce, and reconsideration of scientific reward systems. Copyright © 2014 Elsevier Ltd. All rights reserved.

Selection and trajectory design to mission secondary targets

NASA Astrophysics Data System (ADS)

Victorino Sarli, Bruno; Kawakatsu, Yasuhiro

2017-02-01

Recently, with new trajectory design techniques and use of low-thrust propulsion systems, missions have become more efficient and cheaper with respect to propellant. As a way to increase the mission's value and scientific return, secondary targets close to the main trajectory are often added with a small change in the transfer trajectory. As a result of their large number, importance and facility to perform a flyby, asteroids are commonly used as such targets. This work uses the Primer Vector theory to define the direction and magnitude of the thrust for a minimum fuel consumption problem. The design of a low-thrust trajectory with a midcourse asteroid flyby is not only challenging for the low-thrust problem solution, but also with respect to the selection of a target and its flyby point. Currently more than 700,000 minor bodies have been identified, which generates a very large number of possible flyby points. This work uses a combination of reachability, reference orbit, and linear theory to select appropriate candidates, drastically reducing the simulation time, to be later included in the main trajectory and optimized. Two test cases are presented using the aforementioned selection process and optimization to add and design a secondary flyby to a mission with the primary objective of 3200 Phaethon flyby and 25143 Itokawa rendezvous.

Selected psychiatric problems among college students in two Arab countries: comparison with the USA.

PubMed

Kronfol, Ziad; Khalifa, Batoul; Khoury, Brigitte; Omar, Omar; Daouk, Sariah; deWitt, J P; ElAzab, Nourehan; Eisenberg, Daniel

2018-05-24

Psychiatric problems among college students on USA campuses are common. Little is known about similar problems in developing countries, particularly the Arab region. The goal of this study was to assess the frequency of selected psychiatric problems among college students in two Arab countries: Qatar and Lebanon, and to compare them to the USA. The Healthy Minds Study, an online confidential survey of common psychiatric symptoms designed for college campuses was used. We used the Patient Health Questionnaire-9 (PHQ-9) to screen for major depression, the Generalized Anxiety Disorder-7 (GAD-7) to screen for generalized anxiety and the SCOFF questionnaire to screen for eating disorders. Comparisons were made using ANOVA, Chi-Square tests and logistic regressions. A total of 1841 students participated in the study. The rates of depression (PHQ-9 ≥ 12), generalized anxiety (GAD-7 ≥ 10) and eating disorders (SCOFF≥3) at the combined Arab universities were 34.6, 36.1 and 20.4% respectively. The corresponding rates in the USA were: 12.8, 15.9 and 6.8% (p < 0.001 for all measures). The impact of psychiatric problems on functioning in general and academic performance in particular was more severe in the Arab countries compared to the USA (p < 0.001). Independent predictors of psychiatric problems in general included location, female gender, financial difficulties and poor grades. Being religious had a protective association with mental health. The rates of depression, anxiety and eating disorders were significantly higher among college students in Qatar and Lebanon compared to the USA. Additional research is needed to determine whether these results reflect methodological limitations or true differences in psychopathology across these populations. If replicated, the results indicate that the psychiatric problems on college campuses in the USA are a microcosm of a global problem that needs global solutions.

Pooling the ground: understanding and coordination in collective sense making

PubMed Central

Rączaszek-Leonardi, Joanna; Dębska, Agnieszka; Sochanowicz, Adam

2014-01-01

Common ground is most often understood as the sum of mutually known beliefs, knowledge, and suppositions among the participants in a conversation. It explains why participants do not mention things that should be obvious to both. In some accounts of communication, reaching a mutual understanding, i.e., broadening the common ground, is posed as the ultimate goal of linguistic interactions. Yet, congruent with the more pragmatic views of linguistic behavior, in which language is treated as social coordination, understanding each other is not the purpose (or not the sole purpose) of linguistic interactions. This purpose is seen as at least twofold (e.g., Fusaroli et al., 2014): to maintain the systemic character of a conversing dyad and to organize it into a functional synergy in the face of tasks posed for a dyadic system as a whole. It seems that the notion of common ground is not sufficient to address the latter character of interaction. In situated communication, in which meaning is created in a distributed way in the very process of interaction, both common (sameness) and privileged (diversity) information must be pooled task-dependently across participants. In this paper, we analyze the definitions of common and privileged ground and propose a conceptual extension that may facilitate a theoretical account of agents that coordinate via linguistic communication. To illustrate the usefulness of this augmented framework, we apply it to one of the recurrent issues in psycholinguistic research, namely the problem of perspective-taking in dialog, and draw conclusions for the broader problem of audience design. PMID:25426087

Network planning under uncertainties

NASA Astrophysics Data System (ADS)

Ho, Kwok Shing; Cheung, Kwok Wai

2008-11-01

One of the main focuses for network planning is on the optimization of network resources required to build a network under certain traffic demand projection. Traditionally, the inputs to this type of network planning problems are treated as deterministic. In reality, the varying traffic requirements and fluctuations in network resources can cause uncertainties in the decision models. The failure to include the uncertainties in the network design process can severely affect the feasibility and economics of the network. Therefore, it is essential to find a solution that can be insensitive to the uncertain conditions during the network planning process. As early as in the 1960's, a network planning problem with varying traffic requirements over time had been studied. Up to now, this kind of network planning problems is still being active researched, especially for the VPN network design. Another kind of network planning problems under uncertainties that has been studied actively in the past decade addresses the fluctuations in network resources. One such hotly pursued research topic is survivable network planning. It considers the design of a network under uncertainties brought by the fluctuations in topology to meet the requirement that the network remains intact up to a certain number of faults occurring anywhere in the network. Recently, the authors proposed a new planning methodology called Generalized Survivable Network that tackles the network design problem under both varying traffic requirements and fluctuations of topology. Although all the above network planning problems handle various kinds of uncertainties, it is hard to find a generic framework under more general uncertainty conditions that allows a more systematic way to solve the problems. With a unified framework, the seemingly diverse models and algorithms can be intimately related and possibly more insights and improvements can be brought out for solving the problem. This motivates us to seek a generic framework for solving the network planning problem under uncertainties. In addition to reviewing the various network planning problems involving uncertainties, we also propose that a unified framework based on robust optimization can be used to solve a rather large segment of network planning problem under uncertainties. Robust optimization is first introduced in the operations research literature and is a framework that incorporates information about the uncertainty sets for the parameters in the optimization model. Even though robust optimization is originated from tackling the uncertainty in the optimization process, it can serve as a comprehensive and suitable framework for tackling generic network planning problems under uncertainties. In this paper, we begin by explaining the main ideas behind the robust optimization approach. Then we demonstrate the capabilities of the proposed framework by giving out some examples of how the robust optimization framework can be applied to the current common network planning problems under uncertain environments. Next, we list some practical considerations for solving the network planning problem under uncertainties with the proposed framework. Finally, we conclude this article with some thoughts on the future directions for applying this framework to solve other network planning problems.

Effectiveness of guideline-based care by occupational physicians on the return-to-work of workers with common mental disorders: design of a cluster-randomised controlled trial

PubMed Central

2013-01-01

Background Sickness absence due to common mental disorders (such as depression, anxiety disorder, adjustment disorder) is a problem in many Western countries. Long-term sickness absence leads to substantial societal and financial costs. In workers with common mental disorders, sickness absence costs are much higher than medical costs. In the Netherlands, a practice guideline was developed that promotes an activating approach of the occupational physician to establish faster return-to-work by enhancing the problem-solving capacity of workers, especially in relation to their work environment. Studies on this guideline indicate a promising association between guideline adherence and a shortened sick leave duration, but also minimal adherence to the guideline by occupational physicians. Therefore, this study evaluates the effect of guideline-based care on the full return-to-work of workers who are sick listed due to common mental disorders. Methods/design This is a two-armed cluster-randomised controlled trial with randomisation at the occupational physician level. During one year, occupational physicians in the intervention group receive innovative training to improve their guideline-based care whereas occupational physicians in the control group provide care as usual. A total of 232 workers, sick listed due to common mental disorders and counselled by participating occupational physicians, will be included. Data are collected via the registration system of the occupational health service, and by questionnaires at baseline and at 3, 6 and 12 months. The primary outcome is time to full return-to-work. Secondary outcomes are partial return-to-work, total number of sick leave days, symptoms, and workability. Personal and work characteristics are the prognostic measures. Additional measures are coping, self-efficacy, remoralization, personal experiences, satisfaction with consultations with the occupational physician and with contact with the supervisor, experiences and behaviour of the supervisor, and the extent of guideline adherence. Discussion If the results show that guideline-based care in fact leads to faster and sustainable return-to-work, this study will contribute to lowering personal, societal and financial costs. Trial registration ISRCTN86605310 PMID:23496948

Interior search algorithm (ISA): a novel approach for global optimization.

PubMed

Gandomi, Amir H

2014-07-01

This paper presents the interior search algorithm (ISA) as a novel method for solving optimization tasks. The proposed ISA is inspired by interior design and decoration. The algorithm is different from other metaheuristic algorithms and provides new insight for global optimization. The proposed method is verified using some benchmark mathematical and engineering problems commonly used in the area of optimization. ISA results are further compared with well-known optimization algorithms. The results show that the ISA is efficiently capable of solving optimization problems. The proposed algorithm can outperform the other well-known algorithms. Further, the proposed algorithm is very simple and it only has one parameter to tune. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Automating FEA programming

NASA Technical Reports Server (NTRS)

Sharma, Naveen

1992-01-01

In this paper we briefly describe a combined symbolic and numeric approach for solving mathematical models on parallel computers. An experimental software system, PIER, is being developed in Common Lisp to synthesize computationally intensive and domain formulation dependent phases of finite element analysis (FEA) solution methods. Quantities for domain formulation like shape functions, element stiffness matrices, etc., are automatically derived using symbolic mathematical computations. The problem specific information and derived formulae are then used to generate (parallel) numerical code for FEA solution steps. A constructive approach to specify a numerical program design is taken. The code generator compiles application oriented input specifications into (parallel) FORTRAN77 routines with the help of built-in knowledge of the particular problem, numerical solution methods and the target computer.

Transdiagnostic Case Conceptualization of Emotional Problems in Youth with ASD: An Emotion Regulation Approach

PubMed Central

Weiss, Jonathan A

2014-01-01

Youth with autism spectrum disorder often struggle to cope with co-occurring anxiety, depression, or anger, and having both internalizing and externalizing symptoms is a common clinical presentation. A number of authors have designed cognitive-behavioral interventions to address transdiagnostic factors related to multiple emotional problems, although none have applied this focus to youth with ASD. The current review article describes how a transdiagnostic emotion regulation framework may inform cognitive-behavioral interventions for youth with ASD, which until now have focused almost exclusively on anxiety. Research is needed to empirically test how a transdiagnostic intervention can address the processes of emotion regulation and assist youth with ASD to cope with their emotional disorders. PMID:25673923

State reference design and saturated control of doubly-fed induction generators under voltage dips

NASA Astrophysics Data System (ADS)

Tilli, Andrea; Conficoni, Christian; Hashemi, Ahmad

2017-04-01

In this paper, the stator/rotor currents control problem of doubly-fed induction generator under faulty line voltage is carried out. Common grid faults cause a steep decline in the line voltage profile, commonly denoted as voltage dip. This point is critical for such kind of machines, having their stator windings directly connected to the grid. In this respect, solid methodological nonlinear control theory arguments are exploited and applied to design a novel controller, whose main goal is to improve the system behaviour during voltage dips, endowing it with low voltage ride through capability, a fundamental feature required by modern Grid Codes. The proposed solution exploits both feedforward and feedback actions. The feedforward part relies on suitable reference trajectories for the system internal dynamics, which are designed to prevent large oscillations in the rotor currents and command voltages, excited by line perturbations. The feedback part uses state measurements and is designed according to Linear Matrix Inequalities (LMI) based saturated control techniques to further reduce oscillations, while explicitly accounting for the system constraints. Numerical simulations verify the benefits of the internal dynamics trajectory planning, and the saturated state feedback action, in crucially improving the Doubly-Fed Induction Machine response under severe grid faults.

Mechanism Design for Incentivizing Social Media Contributions

NASA Astrophysics Data System (ADS)

Singh, Vivek K.; Jain, Ramesh; Kankanhalli, Mohan

Despite recent advancements in user-driven social media platforms, tools for studying user behavior patterns and motivations remain primitive. We highlight the voluntary nature of user contributions and that users can choose when (and when not) to contribute to the common media pool. A Game theoretic framework is proposed to study the dynamics of social media networks where contribution costs are individual but gains are common. We model users as rational selfish agents, and consider domain attributes like voluntary participation, virtual reward structure, network effect, and public-sharing to model the dynamics of this interaction. The created model describes the most appropriate contribution strategy from each user's perspective and also highlights issues like 'free-rider' problem and individual rationality leading to irrational (i.e. sub-optimal) group behavior. We also consider the perspective of the system designer who is interested in finding the best incentive mechanisms to influence the selfish end-users so that the overall system utility is maximized. We propose and compare multiple mechanisms (based on optimal bonus payment, social incentive leveraging, and second price auction) to study how a system designer can exploit the selfishness of its users, to design incentive mechanisms which improve the overall task-completion probability and system performance, while possibly still benefiting the individual users.

System principles, mathematical models and methods to ensure high reliability of safety systems

NASA Astrophysics Data System (ADS)

Zaslavskyi, V.

2017-04-01

Modern safety and security systems are composed of a large number of various components designed for detection, localization, tracking, collecting, and processing of information from the systems of monitoring, telemetry, control, etc. They are required to be highly reliable in a view to correctly perform data aggregation, processing and analysis for subsequent decision making support. On design and construction phases of the manufacturing of such systems a various types of components (elements, devices, and subsystems) are considered and used to ensure high reliability of signals detection, noise isolation, and erroneous commands reduction. When generating design solutions for highly reliable systems a number of restrictions and conditions such as types of components and various constrains on resources should be considered. Various types of components perform identical functions; however, they are implemented using diverse principles, approaches and have distinct technical and economic indicators such as cost or power consumption. The systematic use of different component types increases the probability of tasks performing and eliminates the common cause failure. We consider type-variety principle as an engineering principle of system analysis, mathematical models based on this principle, and algorithms for solving optimization problems of highly reliable safety and security systems design. Mathematical models are formalized in a class of two-level discrete optimization problems of large dimension. The proposed approach, mathematical models, algorithms can be used for problem solving of optimal redundancy on the basis of a variety of methods and control devices for fault and defects detection in technical systems, telecommunication networks, and energy systems.

Observable indicators and behaviors for the identification of problem gamblers in venue environments

PubMed Central

Delfabbro, Paul; Thomas, Anna

2016-01-01

Background and aims In many jurisdictions, where gambling services are provided, regulatory codes require gambling operators to apply a duty of care toward patrons. A common feature of these provisions is some expectation that venue staff identify and assist patrons who might be experiencing problems with their gambling. The effectiveness of such measures is, however, predicated on the assumption that there are reliable and observable indicators that might be used to allow problem gamblers to be distinguished from other gamblers. Methods In this study, we consolidate the findings from two large Australian studies (n = 505 and n = 680) of regular gamblers that were designed to identify reliable and useful indicators for identifying problem gambling in venues. Results It was found that problem gamblers are much more likely to report potentially visible emotional reactions, unusual social behaviors, and very intense or frenetic gambling behavior. Discussion and conclusions This study shows that there are a range of indicators that could potentially be used to identify people experiencing problems in venues, but that decisions are most likely to be accurate if based on an accumulation of a diverse range of indicators. PMID:27670713

Towards a Framework for Modeling Space Systems Architectures

NASA Technical Reports Server (NTRS)

Shames, Peter; Skipper, Joseph

2006-01-01

Topics covered include: 1) Statement of the problem: a) Space system architecture is complex; b) Existing terrestrial approaches must be adapted for space; c) Need a common architecture methodology and information model; d) Need appropriate set of viewpoints. 2) Requirements on a space systems model. 3) Model Based Engineering and Design (MBED) project: a) Evaluated different methods; b) Adapted and utilized RASDS & RM-ODP; c) Identified useful set of viewpoints; d) Did actual model exchanges among selected subset of tools. 4) Lessons learned & future vision.

Intelligent systems of the vehicles’ suspension

NASA Astrophysics Data System (ADS)

Yurlin, D.

2018-02-01

The article is devoted to the current condition of car’s active suspension system. It presents the tendencies in development of the active systems of suspension system, adjustable elements incorporated in them and the companies succeeded in designing such systems. It also mirrors the problem of impact of active systems on car’s safety and their importance for the driver. Advantages and disadvantages of the most common types of active elements are being described, analyzed and compared. The author concludes about the perspectives of these systems’ development.

Simulation of hybrid wind/solar systems for typical areas of Brazil and Cuba

DOE Office of Scientific and Technical Information (OSTI.GOV)

Villar Ale, J.A.; Garcia, F.H.

Brazil and Cuba share a common history of serious problems related to the electrification of their isolated communities. Both countries have renewable resources of energy that allow, for instance, the use of photovoltaic and wind systems. These systems can be used in an integrated way, known as hybrid systems, achieving better reliability and economy. This work presents a simplified methodology for the design of such systems to be applied to the electrification of rural areas in both countries.

Evaluation of manuscripts in health sciences librarianship.

PubMed Central

Crawford, S

1979-01-01

Manuscripts submitted for review and full-length papers and brief communications published in the Bulletin of the Medical Library Association from 1976 through 1978 have been analyzed in order to identify some of the most common problems in the preparation of a paper. The findings point to a need for instructing librarians in (1) understanding the nature of "explanation" in a scientific or historical paper; (2) designing a research project and analyzing the data; (3) preparing data for display; and (4) more effective writing skills. PMID:486821

Line width determination using a biomimetic fly eye vision system.

PubMed

Benson, John B; Wright, Cameron H G; Barrett, Steven F

2007-01-01

Developing a new vision system based on the vision of the common house fly, Musca domestica, has created many interesting design challenges. One of those problems is line width determination, which is the topic of this paper. It has been discovered that line width can be determined with a single sensor as long as either the sensor, or the object in question, has a constant, known velocity. This is an important first step for determining the width of any arbitrary object, with unknown velocity.

Clinical Physiologic Research Instrumentation: An Approach Using Modular Elements and Distributed Processing

PubMed Central

Hagen, R. W.; Ambos, H. D.; Browder, M. W.; Roloff, W. R.; Thomas, L. J.

1979-01-01

The Clinical Physiologic Research System (CPRS) developed from our experience in applying computers to medical instrumentation problems. This experience revealed a set of applications with a commonality in data acquisition, analysis, input/output, and control needs that could be met by a portable system. The CPRS demonstrates a practical methodology for integrating commercial instruments with distributed modular elements of local design in order to make facile responses to changing instrumentation needs in clinical environments. ImagesFigure 3

Design approaches to experimental mediation☆

PubMed Central

Pirlott, Angela G.; MacKinnon, David P.

2016-01-01

Identifying causal mechanisms has become a cornerstone of experimental social psychology, and editors in top social psychology journals champion the use of mediation methods, particularly innovative ones when possible (e.g. Halberstadt, 2010, Smith, 2012). Commonly, studies in experimental social psychology randomly assign participants to levels of the independent variable and measure the mediating and dependent variables, and the mediator is assumed to causally affect the dependent variable. However, participants are not randomly assigned to levels of the mediating variable(s), i.e., the relationship between the mediating and dependent variables is correlational. Although researchers likely know that correlational studies pose a risk of confounding, this problem seems forgotten when thinking about experimental designs randomly assigning participants to levels of the independent variable and measuring the mediator (i.e., “measurement-of-mediation” designs). Experimentally manipulating the mediator provides an approach to solving these problems, yet these methods contain their own set of challenges (e.g., Bullock, Green, & Ha, 2010). We describe types of experimental manipulations targeting the mediator (manipulations demonstrating a causal effect of the mediator on the dependent variable and manipulations targeting the strength of the causal effect of the mediator) and types of experimental designs (double randomization, concurrent double randomization, and parallel), provide published examples of the designs, and discuss the strengths and challenges of each design. Therefore, the goals of this paper include providing a practical guide to manipulation-of-mediator designs in light of their challenges and encouraging researchers to use more rigorous approaches to mediation because manipulation-of-mediator designs strengthen the ability to infer causality of the mediating variable on the dependent variable. PMID:27570259

Design approaches to experimental mediation.

PubMed

Pirlott, Angela G; MacKinnon, David P

2016-09-01

Identifying causal mechanisms has become a cornerstone of experimental social psychology, and editors in top social psychology journals champion the use of mediation methods, particularly innovative ones when possible (e.g. Halberstadt, 2010, Smith, 2012). Commonly, studies in experimental social psychology randomly assign participants to levels of the independent variable and measure the mediating and dependent variables, and the mediator is assumed to causally affect the dependent variable. However, participants are not randomly assigned to levels of the mediating variable(s), i.e., the relationship between the mediating and dependent variables is correlational. Although researchers likely know that correlational studies pose a risk of confounding, this problem seems forgotten when thinking about experimental designs randomly assigning participants to levels of the independent variable and measuring the mediator (i.e., "measurement-of-mediation" designs). Experimentally manipulating the mediator provides an approach to solving these problems, yet these methods contain their own set of challenges (e.g., Bullock, Green, & Ha, 2010). We describe types of experimental manipulations targeting the mediator (manipulations demonstrating a causal effect of the mediator on the dependent variable and manipulations targeting the strength of the causal effect of the mediator) and types of experimental designs (double randomization, concurrent double randomization, and parallel), provide published examples of the designs, and discuss the strengths and challenges of each design. Therefore, the goals of this paper include providing a practical guide to manipulation-of-mediator designs in light of their challenges and encouraging researchers to use more rigorous approaches to mediation because manipulation-of-mediator designs strengthen the ability to infer causality of the mediating variable on the dependent variable.

An improved camera trap for amphibians, reptiles, small mammals, and large invertebrates

USGS Publications Warehouse

Hobbs, Michael T.; Brehme, Cheryl S.

2017-01-01

Camera traps are valuable sampling tools commonly used to inventory and monitor wildlife communities but are challenged to reliably sample small animals. We introduce a novel active camera trap system enabling the reliable and efficient use of wildlife cameras for sampling small animals, particularly reptiles, amphibians, small mammals and large invertebrates. It surpasses the detection ability of commonly used passive infrared (PIR) cameras for this application and eliminates problems such as high rates of false triggers and high variability in detection rates among cameras and study locations. Our system, which employs a HALT trigger, is capable of coupling to digital PIR cameras and is designed for detecting small animals traversing small tunnels, narrow trails, small clearings and along walls or drift fencing.

An improved camera trap for amphibians, reptiles, small mammals, and large invertebrates.

PubMed

Hobbs, Michael T; Brehme, Cheryl S

2017-01-01

Camera traps are valuable sampling tools commonly used to inventory and monitor wildlife communities but are challenged to reliably sample small animals. We introduce a novel active camera trap system enabling the reliable and efficient use of wildlife cameras for sampling small animals, particularly reptiles, amphibians, small mammals and large invertebrates. It surpasses the detection ability of commonly used passive infrared (PIR) cameras for this application and eliminates problems such as high rates of false triggers and high variability in detection rates among cameras and study locations. Our system, which employs a HALT trigger, is capable of coupling to digital PIR cameras and is designed for detecting small animals traversing small tunnels, narrow trails, small clearings and along walls or drift fencing.

Common Scientific and Statistical Errors in Obesity Research

PubMed Central

George, Brandon J.; Beasley, T. Mark; Brown, Andrew W.; Dawson, John; Dimova, Rositsa; Divers, Jasmin; Goldsby, TaShauna U.; Heo, Moonseong; Kaiser, Kathryn A.; Keith, Scott; Kim, Mimi Y.; Li, Peng; Mehta, Tapan; Oakes, J. Michael; Skinner, Asheley; Stuart, Elizabeth; Allison, David B.

2015-01-01

We identify 10 common errors and problems in the statistical analysis, design, interpretation, and reporting of obesity research and discuss how they can be avoided. The 10 topics are: 1) misinterpretation of statistical significance, 2) inappropriate testing against baseline values, 3) excessive and undisclosed multiple testing and “p-value hacking,” 4) mishandling of clustering in cluster randomized trials, 5) misconceptions about nonparametric tests, 6) mishandling of missing data, 7) miscalculation of effect sizes, 8) ignoring regression to the mean, 9) ignoring confirmation bias, and 10) insufficient statistical reporting. We hope that discussion of these errors can improve the quality of obesity research by helping researchers to implement proper statistical practice and to know when to seek the help of a statistician. PMID:27028280

Research: increasing value, reducing waste 2

PubMed Central

Ioannidis, John P A; Greenland, Sander; Hlatky, Mark A; Khoury, Muin J; Macleod, Malcolm R; Moher, David; Schulz, Kenneth F; Tibshirani, Robert

2015-01-01

Correctable weaknesses in the design, conduct, and analysis of biomedical and public health research studies can produce misleading results and waste valuable resources. Small effects can be difficult to distinguish from bias introduced by study design and analyses. An absence of detailed written protocols and poor documentation of research is common. Information obtained might not be useful or important, and statistical precision or power is often too low or used in a misleading way. Insufficient consideration might be given to both previous and continuing studies. Arbitrary choice of analyses and an overemphasis on random extremes might affect the reported findings. Several problems relate to the research workforce, including failure to involve experienced statisticians and methodologists, failure to train clinical researchers and laboratory scientists in research methods and design, and the involvement of stakeholders with conflicts of interest. Inadequate emphasis is placed on recording of research decisions and on reproducibility of research. Finally, reward systems incentivise quantity more than quality, and novelty more than reliability. We propose potential solutions for these problems, including improvements in protocols and documentation, consideration of evidence from studies in progress, standardisation of research efforts, optimisation and training of an experienced and non-conflicted scientific workforce, and reconsideration of scientific reward systems. PMID:24411645

Engrained experience--a comparison of microclimate perception schemata and microclimate measurements in Dutch urban squares.

PubMed

Lenzholzer, Sanda

2010-03-01

Acceptance of public spaces is often guided by perceptual schemata. Such schemata also seem to play a role in thermal comfort and microclimate experience. For climate-responsive design with a focus on thermal comfort it is important to acquire knowledge about these schemata. For this purpose, perceived and "real" microclimate situations were compared for three Dutch urban squares. People were asked about their long-term microclimate perceptions, which resulted in "cognitive microclimate maps". These were compared with mapped microclimate data from measurements representing the common microclimate when people stay outdoors. The comparison revealed some unexpected low matches; people clearly overestimated the influence of the wind. Therefore, a second assumption was developed: that it is the more salient wind situations that become engrained in people's memory. A comparison using measurement data from windy days shows better matches. This suggests that these more salient situations play a role in the microclimate schemata that people develop about urban places. The consequences from this study for urban design are twofold. Firstly, urban design should address not only the "real" problems, but, more prominently, the "perceived" problems. Secondly, microclimate simulations addressing thermal comfort issues in urban spaces should focus on these perceived, salient situations.

Multidisciplinary Optimization Branch Experience Using iSIGHT Software

NASA Technical Reports Server (NTRS)

Padula, S. L.; Korte, J. J.; Dunn, H. J.; Salas, A. O.

1999-01-01

The Multidisciplinary Optimization (MDO) Branch at NASA Langley is investigating frameworks for supporting multidisciplinary analysis and optimization research. A framework provides software and system services to integrate computational tasks and allows the researcher to concentrate more on the application and less on the programming details. A framework also provides a common working environment and a full range of optimization tools, and so increases the productivity of multidisciplinary research teams. Finally, a framework enables staff members to develop applications for use by disciplinary experts in other organizations. This year, the MDO Branch has gained experience with the iSIGHT framework. This paper describes experiences with four aerospace applications, including: (1) reusable launch vehicle sizing, (2) aerospike nozzle design, (3) low-noise rotorcraft trajectories, and (4) acoustic liner design. Brief overviews of each problem are provided, including the number and type of disciplinary codes and computation time estimates. In addition, the optimization methods, objective functions, design variables, and constraints are described for each problem. For each case, discussions on the advantages and disadvantages of using the iSIGHT framework are provided as well as notes on the ease of use of various advanced features and suggestions for areas of improvement.

Operator assistant systems - An experimental approach using a telerobotics application

NASA Technical Reports Server (NTRS)

Boy, Guy A.; Mathe, Nathalie

1993-01-01

This article presents a knowledge-based system methodology for developing operator assistant (OA) systems in dynamic and interactive environments. This is a problem both of training and design, which is the subject of this article. Design includes both design of the system to be controlled and design of procedures for operating this system. A specific knowledge representation is proposed for representing the corresponding system and operational knowledge. This representation is based on the situation recognition and analytical reasoning paradigm. It tries to make explicit common factors involved in both human and machine intelligence, including perception and reasoning. An OA system based on this representation has been developed for space telerobotics. Simulations have been carried out with astronauts and the resulting protocols have been analyzed. Results show the relevance of the approach and have been used for improving the knowledge representation and the OA architecture.

On ethics and the earthquake resistant interior design of buildings.

PubMed

Hurol, Yonca

2014-03-01

The most common tectonic quality of modern structures, such as frame systems, is their flexibility; they are open for change. Although this characteristic is a big advantage in comparison to the inflexible masonry structures of the past, it might also create some serious problems, such as e.g. the lack of safety in the event of an earthquake, if the flexibility is not used consciously by architects and interior designers. This article attempts to define and establish some rules for the interior design of buildings with reinforced concrete frame systems. The rules for making subtractions from these structures and extending them by making additions to them are contained within this article. The main objective of this article is to derive some ethical values from these rules. Thus, the conclusion of the article focuses on the derivation of some ethical values for achieving earthquake resistant interior design of buildings with reinforced concrete frame systems.

The use of analysis of variance procedures in biological studies

USGS Publications Warehouse

Williams, B.K.

1987-01-01

The analysis of variance (ANOVA) is widely used in biological studies, yet there remains considerable confusion among researchers about the interpretation of hypotheses being tested. Ambiguities arise when statistical designs are unbalanced, and in particular when not all combinations of design factors are represented in the data. This paper clarifies the relationship among hypothesis testing, statistical modelling and computing procedures in ANOVA for unbalanced data. A simple two-factor fixed effects design is used to illustrate three common parametrizations for ANOVA models, and some associations among these parametrizations are developed. Biologically meaningful hypotheses for main effects and interactions are given in terms of each parametrization, and procedures for testing the hypotheses are described. The standard statistical computing procedures in ANOVA are given along with their corresponding hypotheses. Throughout the development unbalanced designs are assumed and attention is given to problems that arise with missing cells.

Trapezius muscle activity in using ordinary and ergonomically designed dentistry chairs.

PubMed

Haddad, O; Sanjari, M A; Amirfazli, A; Narimani, R; Parnianpour, M

2012-04-01

Most dentists complain of musculoskeletal disorders which can be caused by prolonged static posture, lack of suitable rest and other physical and psychological problems. We evaluated a chair with a new ergonomic design which incorporated forward leaning chest and arm supports. The chair was evaluated in the laboratory during task simulation and EMG analysis on 12 students and subjectively assessed by 30 professional dentists using an 18-item questionnaire. EMG activity of right and left trapezius muscles for 12 male students with no musculoskeletal disorders was measured while simulating common tasks like working on the teeth of the lower jaw. Normalized EMG data showed significant reduction (p<0.05) in all EMG recordings of the trapezius muscle. Dentists also unanimously preferred the ergonomically designed chair. Such ergonomically designed chairs should be introduced as early as possible in student training before bad postural habits are acquired.

Metrication study for large space telescope

NASA Technical Reports Server (NTRS)

Creswick, F. A.; Weller, A. E.

1973-01-01

Various approaches which could be taken in developing a metric-system design for the Large Space Telescope, considering potential penalties on development cost and time, commonality with other satellite programs, and contribution to national goals for conversion to the metric system of units were investigated. Information on the problems, potential approaches, and impacts of metrication was collected from published reports on previous aerospace-industry metrication-impact studies and through numerous telephone interviews. The recommended approach to LST metrication formulated in this study cells for new components and subsystems to be designed in metric-module dimensions, but U.S. customary practice is allowed where U.S. metric standards and metric components are not available or would be unsuitable. Electrical/electronic-system design, which is presently largely metric, is considered exempt from futher metrication. An important guideline is that metric design and fabrication should in no way compromise the effectiveness of the LST equipment.

A Phase I/II adaptive design for heterogeneous groups with application to a stereotactic body radiation therapy trial.

PubMed

Wages, Nolan A; Read, Paul W; Petroni, Gina R

2015-01-01

Dose-finding studies that aim to evaluate the safety of single agents are becoming less common, and advances in clinical research have complicated the paradigm of dose finding in oncology. A class of more complex problems, such as targeted agents, combination therapies and stratification of patients by clinical or genetic characteristics, has created the need to adapt early-phase trial design to the specific type of drug being investigated and the corresponding endpoints. In this article, we describe the implementation of an adaptive design based on a continual reassessment method for heterogeneous groups, modified to coincide with the objectives of a Phase I/II trial of stereotactic body radiation therapy in patients with painful osseous metastatic disease. Operating characteristics of the Institutional Review Board approved design are demonstrated under various possible true scenarios via simulation studies. Copyright © 2015 John Wiley & Sons, Ltd.

High-pressure cryogenic seals for pressure vessels

NASA Technical Reports Server (NTRS)

Buggele, A. E.

1977-01-01

This investigation of the problems associated with reliably containing gaseous helium pressurized to 1530 bars (22 500 psi) between 4.2 K and 150 K led to the following conclusions: (1) common seal designs used in existing elevated-temperature pressure vessels are unsuitable for high-pressure cryogenic operation, (2) extrusion seal-ring materials such as Teflon, tin, and lead are not good seal materials for cryogenic high-pressure operation; and (3) several high-pressure cryogenic seal systems suitable for large-pressure vessel applications were developed; two seals required prepressurization, and one seal functioned repeatedly without any prepressurization. These designs used indium seal rings, brass or 304 stainless-steel anvil rings, and two O-rings of silicone rubber or Kel-F.

Fabrication of the planar angular rotator using the CMOS process

NASA Astrophysics Data System (ADS)

Dai, Ching-Liang; Chang, Chien-Liu; Chen, Hung-Lin; Chang, Pei-Zen

2002-05-01

In this investigation we propose a novel planar angular rotator fabricated by the conventional complementary metal-oxide semiconductor (CMOS) process. Following the 0.6 μm single poly triple metal (SPTM) CMOS process, the device is completed by a simple maskless, post-process etching step. The rotor of the planar angular rotator rotates around its geometric center with electrostatic actuation. The proposed design adopts an intelligent mechanism including the slider-crank system to permit simultaneous motion. The CMOS planar angular rotator could be driven with driving voltages of around 40 V. The design proposed here has a shorter response time and longer life, without problems of friction and wear, compared to the more common planar angular micromotor.

Dynamic and fluid-structure interaction simulations of bioprosthetic heart valves using parametric design with T-splines and Fung-type material models

NASA Astrophysics Data System (ADS)

Hsu, Ming-Chen; Kamensky, David; Xu, Fei; Kiendl, Josef; Wang, Chenglong; Wu, Michael C. H.; Mineroff, Joshua; Reali, Alessandro; Bazilevs, Yuri; Sacks, Michael S.

2015-06-01

This paper builds on a recently developed immersogeometric fluid-structure interaction (FSI) methodology for bioprosthetic heart valve (BHV) modeling and simulation. It enhances the proposed framework in the areas of geometry design and constitutive modeling. With these enhancements, BHV FSI simulations may be performed with greater levels of automation, robustness and physical realism. In addition, the paper presents a comparison between FSI analysis and standalone structural dynamics simulation driven by prescribed transvalvular pressure, the latter being a more common modeling choice for this class of problems. The FSI computation achieved better physiological realism in predicting the valve leaflet deformation than its standalone structural dynamics counterpart.

Problem-based learning outcomes: the glass half-full.

PubMed

Distlehorst, Linda H; Dawson, Elizabeth; Robbs, Randall S; Barrows, Howard S

2005-03-01

To compare the characteristics and outcome data of students from a single institution with a two-track, problem based learning (PBL) and standard (STND) curriculum. PBL and STND students from nine graduating classes at Southern Illinois University School of Medicine were compared using common medical school performance outcomes (USMLE Step 1, USMLE Step 2, clerkship mean ratings, number of clerkship honors and remediation designations, and the senior clinical competency exam), as well as common admission and demographic variables. PBL students were older, and the cohort had a higher proportion of women. The two tracks had similar USMLE Step 1 and 2 mean scores and pass rates. Performance differences were significant for PBL students in two clerkships as well as in the clerkship subcategories of clinical performance, knowledge and clinical reasoning, and noncognitive behaviors. In addition, the proportion of PBL students earning honors was greater. The traditional undergraduate educational outcomes for the PBL and STND students are very positive. In several of the clerkship performance measures, the PBL students performed significantly better, and in no circumstance did they perform worse than the STND students.

Design and fabrication of facial prostheses for cancer patient applying computer aided method and manufacturing (CADCAM)

NASA Astrophysics Data System (ADS)

Din, Tengku Noor Daimah Tengku; Jamayet, Nafij; Rajion, Zainul Ahmad; Luddin, Norhayati; Abdullah, Johari Yap; Abdullah, Abdul Manaf; Yahya, Suzana

2016-12-01

Facial defects are either congenital or caused by trauma or cancer where most of them affect the person appearance. The emotional pressure and low self-esteem are problems commonly related to patient with facial defect. To overcome this problem, silicone prosthesis was designed to cover the defect part. This study describes the techniques in designing and fabrication for facial prosthesis applying computer aided method and manufacturing (CADCAM). The steps of fabricating the facial prosthesis were based on a patient case. The patient was diagnosed for Gorlin Gotz syndrome and came to Hospital Universiti Sains Malaysia (HUSM) for prosthesis. The 3D image of the patient was reconstructed from CT data using MIMICS software. Based on the 3D image, the intercanthal and zygomatic measurements of the patient were compared with available data in the database to find the suitable nose shape. The normal nose shape for the patient was retrieved from the nasal digital library. Mirror imaging technique was used to mirror the facial part. The final design of facial prosthesis including eye, nose and cheek was superimposed to see the result virtually. After the final design was confirmed, the mould design was created. The mould of nasal prosthesis was printed using Objet 3D printer. Silicone casting was done using the 3D print mould. The final prosthesis produced from the computer aided method was acceptable to be used for facial rehabilitation to provide better quality of life.

Information content of household-stratified epidemics.

PubMed

Kinyanjui, T M; Pellis, L; House, T

2016-09-01

Household structure is a key driver of many infectious diseases, as well as a natural target for interventions such as vaccination programs. Many theoretical and conceptual advances on household-stratified epidemic models are relatively recent, but have successfully managed to increase the applicability of such models to practical problems. To be of maximum realism and hence benefit, they require parameterisation from epidemiological data, and while household-stratified final size data has been the traditional source, increasingly time-series infection data from households are becoming available. This paper is concerned with the design of studies aimed at collecting time-series epidemic data in order to maximize the amount of information available to calibrate household models. A design decision involves a trade-off between the number of households to enrol and the sampling frequency. Two commonly used epidemiological study designs are considered: cross-sectional, where different households are sampled at every time point, and cohort, where the same households are followed over the course of the study period. The search for an optimal design uses Bayesian computationally intensive methods to explore the joint parameter-design space combined with the Shannon entropy of the posteriors to estimate the amount of information in each design. For the cross-sectional design, the amount of information increases with the sampling intensity, i.e., the designs with the highest number of time points have the most information. On the other hand, the cohort design often exhibits a trade-off between the number of households sampled and the intensity of follow-up. Our results broadly support the choices made in existing epidemiological data collection studies. Prospective problem-specific use of our computational methods can bring significant benefits in guiding future study designs. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Ultimate strength performance of tankers associated with industry corrosion addition practices

NASA Astrophysics Data System (ADS)

Kim, Do Kyun; Kim, Han Byul; Zhang, Xiaoming; Li, Chen Guang; Paik, Jeom Kee

2014-09-01

In the ship and offshore structure design, age-related problems such as corrosion damage, local denting, and fatigue damage are important factors to be considered in building a reliable structure as they have a significant influence on the residual structural capacity. In shipping, corrosion addition methods are widely adopted in structural design to prevent structural capacity degradation. The present study focuses on the historical trend of corrosion addition rules for ship structural design and investigates their effects on the ultimate strength performance such as hull girder and stiffened panel of double hull oil tankers. Three types of rules based on corrosion addition models, namely historic corrosion rules (pre-CSR), Common Structural Rules (CSR), and harmonised Common Structural Rules (CSRH) are considered and compared with two other corrosion models namely UGS model, suggested by the Union of Greek Shipowners (UGS), and Time-Dependent Corrosion Wastage Model (TDCWM). To identify the general trend in the effects of corrosion damage on the ultimate longitudinal strength performance, the corrosion addition rules are applied to four representative sizes of double hull oil tankers namely Panamax, Aframax, Suezmax, and VLCC. The results are helpful in understanding the trend of corrosion additions for tanker structures

Computer-aided design of antenna structures and components

NASA Technical Reports Server (NTRS)

Levy, R.

1976-01-01

This paper discusses computer-aided design procedures for antenna reflector structures and related components. The primary design aid is a computer program that establishes cross sectional sizes of the structural members by an optimality criterion. Alternative types of deflection-dependent objectives can be selected for designs subject to constraints on structure weight. The computer program has a special-purpose formulation to design structures of the type frequently used for antenna construction. These structures, in common with many in other areas of application, are represented by analytical models that employ only the three translational degrees of freedom at each node. The special-purpose construction of the program, however, permits coding and data management simplifications that provide advantages in problem size and execution speed. Size and speed are essentially governed by the requirements of structural analysis and are relatively unaffected by the added requirements of design. Computation times to execute several design/analysis cycles are comparable to the times required by general-purpose programs for a single analysis cycle. Examples in the paper illustrate effective design improvement for structures with several thousand degrees of freedom and within reasonable computing times.

Child maltreatment among boy and girl probationers: does type of maltreatment make a difference in offending behavior and psychosocial problems?

PubMed

van der Put, Claudia E; Lanctôt, Nadine; de Ruiter, Corine; van Vugt, Eveline

2015-08-01

This study examined differences in offending behavior and psychosocial problems between juvenile offenders who have been sexually abused (n=231), physically abused (n=1,568), neglected (n=1,555), exposed to multiple forms of maltreatment (n=1,767), and non-victims (n=8,492). In addition, the moderating effect of gender in the association between type of maltreatment and offending behavior/psychosocial problems was examined. Results showed that violent offenses were more common in victims of physical abuse and victims of multiple forms of abuse than in non-victims, both in boys and girls. In boys, sexual offenses were far more common in victims of sexual abuse than in victims of other or multiple forms of maltreatment or in non-victims. In girls, no group differences were found in sexual offending behavior. For both boys and girls, externalizing problems were relatively common in victims of physical abuse and neglect whereas internalizing problems were relatively common in victims of sexual abuse. In victims of multiple forms of maltreatment, both internalizing and externalizing problems were relatively common. Implications for clinical practice are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Large-Scale Study of Fingerprint Matching Systems for Sensor Interoperability Problem

PubMed Central

Hussain, Muhammad; AboAlSamh, Hatim; AlZuair, Mansour

2018-01-01

The fingerprint is a commonly used biometric modality that is widely employed for authentication by law enforcement agencies and commercial applications. The designs of existing fingerprint matching methods are based on the hypothesis that the same sensor is used to capture fingerprints during enrollment and verification. Advances in fingerprint sensor technology have raised the question about the usability of current methods when different sensors are employed for enrollment and verification; this is a fingerprint sensor interoperability problem. To provide insight into this problem and assess the status of state-of-the-art matching methods to tackle this problem, we first analyze the characteristics of fingerprints captured with different sensors, which makes cross-sensor matching a challenging problem. We demonstrate the importance of fingerprint enhancement methods for cross-sensor matching. Finally, we conduct a comparative study of state-of-the-art fingerprint recognition methods and provide insight into their abilities to address this problem. We performed experiments using a public database (FingerPass) that contains nine datasets captured with different sensors. We analyzed the effects of different sensors and found that cross-sensor matching performance deteriorates when different sensors are used for enrollment and verification. In view of our analysis, we propose future research directions for this problem. PMID:29597286

A Large-Scale Study of Fingerprint Matching Systems for Sensor Interoperability Problem.

PubMed

AlShehri, Helala; Hussain, Muhammad; AboAlSamh, Hatim; AlZuair, Mansour

2018-03-28

The fingerprint is a commonly used biometric modality that is widely employed for authentication by law enforcement agencies and commercial applications. The designs of existing fingerprint matching methods are based on the hypothesis that the same sensor is used to capture fingerprints during enrollment and verification. Advances in fingerprint sensor technology have raised the question about the usability of current methods when different sensors are employed for enrollment and verification; this is a fingerprint sensor interoperability problem. To provide insight into this problem and assess the status of state-of-the-art matching methods to tackle this problem, we first analyze the characteristics of fingerprints captured with different sensors, which makes cross-sensor matching a challenging problem. We demonstrate the importance of fingerprint enhancement methods for cross-sensor matching. Finally, we conduct a comparative study of state-of-the-art fingerprint recognition methods and provide insight into their abilities to address this problem. We performed experiments using a public database (FingerPass) that contains nine datasets captured with different sensors. We analyzed the effects of different sensors and found that cross-sensor matching performance deteriorates when different sensors are used for enrollment and verification. In view of our analysis, we propose future research directions for this problem.

The Application of the Weighted k-Partite Graph Problem to the Multiple Alignment for Metabolic Pathways.

PubMed

Chen, Wenbin; Hendrix, William; Samatova, Nagiza F

2017-12-01

The problem of aligning multiple metabolic pathways is one of very challenging problems in computational biology. A metabolic pathway consists of three types of entities: reactions, compounds, and enzymes. Based on similarities between enzymes, Tohsato et al. gave an algorithm for aligning multiple metabolic pathways. However, the algorithm given by Tohsato et al. neglects the similarities among reactions, compounds, enzymes, and pathway topology. How to design algorithms for the alignment problem of multiple metabolic pathways based on the similarity of reactions, compounds, and enzymes? It is a difficult computational problem. In this article, we propose an algorithm for the problem of aligning multiple metabolic pathways based on the similarities among reactions, compounds, enzymes, and pathway topology. First, we compute a weight between each pair of like entities in different input pathways based on the entities' similarity score and topological structure using Ay et al.'s methods. We then construct a weighted k-partite graph for the reactions, compounds, and enzymes. We extract a mapping between these entities by solving the maximum-weighted k-partite matching problem by applying a novel heuristic algorithm. By analyzing the alignment results of multiple pathways in different organisms, we show that the alignments found by our algorithm correctly identify common subnetworks among multiple pathways.

Less Commonly Taught Languages: Resources and Problems.

ERIC Educational Resources Information Center

Centre for Information on Language Teaching, London (England).

This collection of papers from a conference on languages less commonly taught in Britain is concerned with administrative and material problems of teaching these languages. Contents of the publication are: an introduction by G. E. Perren; "Practical Needs" by Anthony Crane; "Problems of Producing Printed Materials" by Rosemary…

Applications of Bayesian spectrum representation in acoustics

NASA Astrophysics Data System (ADS)

Botts, Jonathan M.

This dissertation utilizes a Bayesian inference framework to enhance the solution of inverse problems where the forward model maps to acoustic spectra. A Bayesian solution to filter design inverts a acoustic spectra to pole-zero locations of a discrete-time filter model. Spatial sound field analysis with a spherical microphone array is a data analysis problem that requires inversion of spatio-temporal spectra to directions of arrival. As with many inverse problems, a probabilistic analysis results in richer solutions than can be achieved with ad-hoc methods. In the filter design problem, the Bayesian inversion results in globally optimal coefficient estimates as well as an estimate the most concise filter capable of representing the given spectrum, within a single framework. This approach is demonstrated on synthetic spectra, head-related transfer function spectra, and measured acoustic reflection spectra. The Bayesian model-based analysis of spatial room impulse responses is presented as an analogous problem with equally rich solution. The model selection mechanism provides an estimate of the number of arrivals, which is necessary to properly infer the directions of simultaneous arrivals. Although, spectrum inversion problems are fairly ubiquitous, the scope of this dissertation has been limited to these two and derivative problems. The Bayesian approach to filter design is demonstrated on an artificial spectrum to illustrate the model comparison mechanism and then on measured head-related transfer functions to show the potential range of application. Coupled with sampling methods, the Bayesian approach is shown to outperform least-squares filter design methods commonly used in commercial software, confirming the need for a global search of the parameter space. The resulting designs are shown to be comparable to those that result from global optimization methods, but the Bayesian approach has the added advantage of a filter length estimate within the same unified framework. The application to reflection data is useful for representing frequency-dependent impedance boundaries in finite difference acoustic simulations. Furthermore, since the filter transfer function is a parametric model, it can be modified to incorporate arbitrary frequency weighting and account for the band-limited nature of measured reflection spectra. Finally, the model is modified to compensate for dispersive error in the finite difference simulation, from the filter design process. Stemming from the filter boundary problem, the implementation of pressure sources in finite difference simulation is addressed in order to assure that schemes properly converge. A class of parameterized source functions is proposed and shown to offer straightforward control of residual error in the simulation. Guided by the notion that the solution to be approximated affects the approximation error, sources are designed which reduce residual dispersive error to the size of round-off errors. The early part of a room impulse response can be characterized by a series of isolated plane waves. Measured with an array of microphones, plane waves map to a directional response of the array or spatial intensity map. Probabilistic inversion of this response results in estimates of the number and directions of image source arrivals. The model-based inversion is shown to avoid ambiguities associated with peak-finding or inspection of the spatial intensity map. For this problem, determining the number of arrivals in a given frame is critical for properly inferring the state of the sound field. This analysis is effectively compression of the spatial room response, which is useful for analysis or encoding of the spatial sound field. Parametric, model-based formulations of these problems enhance the solution in all cases, and a Bayesian interpretation provides a principled approach to model comparison and parameter estimation. v

The Barrow Innovation Center Case Series: A novel 3D-printed retractor for use with electromagnetic neuronavigation systems.

PubMed

Bohl, Michael A; Xu, David S; Cavallo, Claudio; Paisan, Gabriella M; Smith, Kris A; Nakaji, Peter

2018-06-01

The Barrow Innovation Center consists of an educational program that promotes interdisciplinary collaboration among neurosurgery, legal, and engineering professionals to foster the development of new medical devices. This report describes a common issue faced during the placement of ventricular shunts for the treatment of hydrocephalus, and the solution to this problem that was developed through the Barrow Innovation Center. Neurosurgery residents involved in the Barrow Innovation Center presented the problem of ferromagnetic retractors interfering with pinless image-guidance systems at a monthly meeting. Potential solutions were openly discussed by an interdisciplinary committee of neurosurgeons, patent lawyers, and biomedical engineers. The committee decided to pursue development of a novel self-retaining retractor made of non-ferromagnetic material as a solution to the problem. Each retractor design was tested in the cadaver laboratory for size and functionality. A final design was chosen and used in a surgical case requiring ventriculoperitoneal shunt placement. The new retractor successfully retracted the scalp without interfering with the electromagnetic image-guidance system. Through the interdisciplinary Barrow Innovation Center program, a newly designed, 3-dimensional-printed skin and soft tissue retractor was created, along with an innovative universal shunt retainer. Through this integrated program dedicated to surgical innovation (i.e., the Barrow Innovation Center), the process of developing and implementing new technology at our institution has been streamlined, creating a culture of innovation within the neurosurgery training program. Copyright © 2018 Elsevier Inc. All rights reserved.

CMOS analogue amplifier circuits optimisation using hybrid backtracking search algorithm with differential evolution

NASA Astrophysics Data System (ADS)

Mallick, S.; Kar, R.; Mandal, D.; Ghoshal, S. P.

2016-07-01

This paper proposes a novel hybrid optimisation algorithm which combines the recently proposed evolutionary algorithm Backtracking Search Algorithm (BSA) with another widely accepted evolutionary algorithm, namely, Differential Evolution (DE). The proposed algorithm called BSA-DE is employed for the optimal designs of two commonly used analogue circuits, namely Complementary Metal Oxide Semiconductor (CMOS) differential amplifier circuit with current mirror load and CMOS two-stage operational amplifier (op-amp) circuit. BSA has a simple structure that is effective, fast and capable of solving multimodal problems. DE is a stochastic, population-based heuristic approach, having the capability to solve global optimisation problems. In this paper, the transistors' sizes are optimised using the proposed BSA-DE to minimise the areas occupied by the circuits and to improve the performances of the circuits. The simulation results justify the superiority of BSA-DE in global convergence properties and fine tuning ability, and prove it to be a promising candidate for the optimal design of the analogue CMOS amplifier circuits. The simulation results obtained for both the amplifier circuits prove the effectiveness of the proposed BSA-DE-based approach over DE, harmony search (HS), artificial bee colony (ABC) and PSO in terms of convergence speed, design specifications and design parameters of the optimal design of the analogue CMOS amplifier circuits. It is shown that BSA-DE-based design technique for each amplifier circuit yields the least MOS transistor area, and each designed circuit is shown to have the best performance parameters such as gain, power dissipation, etc., as compared with those of other recently reported literature.

Use of multidimensional modeling to evaluate a channel restoration design for the Kootenai River, Idaho

USGS Publications Warehouse

Logan, B.L.; McDonald, R.R.; Nelson, J.M.; Kinzel, P.J.; Barton, G.J.

2011-01-01

River channel construction projects aimed at restoring or improving degraded waterways have become common but have been variously successful. In this report a methodology is proposed to evaluate channel designs before channels are built by using multidimensional modeling and analysis. This approach allows detailed analysis of water-surface profiles, sediment transport, and aquatic habitat that may result if the design is implemented. The method presented here addresses the need to model a range of potential stream-discharge and channel-roughness conditions to best assess the function of the design channel for a suite of possible conditions. This methodology is demonstrated by using a preliminary channel-restoration design proposed for a part of the Kootenai River in northern Idaho designated as critical habitat for the endangered white sturgeon (Acipenser transmontanus) and evaluating the design on the basis of simulations with the Flow and Sediment Transport with Morphologic Evolution of Channels (FaSTMECH) model. This evaluation indicated substantial problems with the preliminary design because boundary conditions used in the design were inconsistent with best estimates of future conditions. As a result, simulated water-surface levels did not meet target levels that corresponded to the designed bankfull surfaces; therefore, the flood plain would not function as intended. Sediment-transport analyses indicated that both the current channel of the Kootenai River and the design channel are largely unable to move the bed material through the reach at bankfull discharge. Therefore, sediment delivered to the design channel would likely be deposited within the reach instead of passing through it as planned. Consequently, the design channel geometry would adjust through time. Despite these issues, the design channel would provide more aquatic habitat suitable for spawning white sturgeon (Acipenser transmontanus) at lower discharges than is currently available in the Kootenai River. The evaluation methodology identified potential problems with the design channel that can be addressed through design modifications to better meet project objectives before channel construction.

Key Gaps for Enabling Plant Growth in Future Missions

NASA Technical Reports Server (NTRS)

Anderson, Molly; Motil, Brian; Barta, Dan; Fritsche, Ralph; Massa, Gioia; Quincy, Charlie; Romeyn, Matthew; Wheeler, Ray; Hanford, Anthony

2017-01-01

Growing plants to provide food or psychological benefits to crewmembers is a common vision for the future of human spaceflight, often represented in media and in serious concept studies. The complexity of controlled environment agriculture, and plant growth in microgravity have and continue to be the subject of dedicated scientific research. However, actually implementing these systems in a way that will be cost effective, efficient, and sustainable for future space missions is a complex, multi-disciplinary problem. Key questions exist in many areas: human medical research in nutrition and psychology, horticulture, plant physiology and microbiology, multi-phase microgravity fluid physics, hardware design and technology development, and system design, operations and mission planning. This paper describes key knowledge gaps identified by a multi-disciplinary working group within the National Aeronautics and Space Administration (NASA). It also begins to identify solutions to the simpler questions identified by the group based on work initiated in 2017. Growing plants to provide food or psychological benefits to crewmembers is a common vision for the future of human spaceflight, often represented in media and in serious concept studies. The complexity of controlled environment agriculture, and plant growth in microgravity have and continue to be the subject of dedicated scientific research. However, actually implementing these systems in a way that will be cost effective, efficient, and sustainable for future space missions is a complex, multi-disciplinary problem. Key questions exist in many areas: human medical research in nutrition and psychology, horticulture, plant physiology and microbiology, multi-phase microgravity fluid physics, hardware design and technology development, and system design, operations and mission planning. This paper describes key knowledge gaps identified by a multi-disciplinary working group within the National Aeronautics and Space Administration (NASA). It also begins to identify solutions to the simpler questions identified by the group based on work initiated in 2017.

Common quandaries and their practical solutions in Bayesian network modeling

Treesearch

Bruce G. Marcot

2017-01-01

Use and popularity of Bayesian network (BN) modeling has greatly expanded in recent years, but many common problems remain. Here, I summarize key problems in BN model construction and interpretation,along with suggested practical solutions. Problems in BN model construction include parameterizing probability values, variable definition, complex network structures,...

Complex Adaptive Systems of Systems (CASoS) engineering and foundations for global design.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brodsky, Nancy S.; Finley, Patrick D.; Beyeler, Walter Eugene

2012-01-01

Complex Adaptive Systems of Systems, or CASoS, are vastly complex ecological, sociological, economic and/or technical systems which must be recognized and reckoned with to design a secure future for the nation and the world. Design within CASoS requires the fostering of a new discipline, CASoS Engineering, and the building of capability to support it. Towards this primary objective, we created the Phoenix Pilot as a crucible from which systemization of the new discipline could emerge. Using a wide range of applications, Phoenix has begun building both theoretical foundations and capability for: the integration of Applications to continuously build common understandingmore » and capability; a Framework for defining problems, designing and testing solutions, and actualizing these solutions within the CASoS of interest; and an engineering Environment required for 'the doing' of CASoS Engineering. In a secondary objective, we applied CASoS Engineering principles to begin to build a foundation for design in context of Global CASoS« less

Using Failure Mode and Effects Analysis to design a comfortable automotive driver seat.

PubMed

Kolich, Mike

2014-07-01

Given enough time and use, all designs will fail. There are no fail-free designs. This is especially true when it comes to automotive seating comfort where the characteristics and preferences of individual customers are many and varied. To address this problem, individuals charged with automotive seating comfort development have, traditionally, relied on iterative and, as a result, expensive build-test cycles. Cost pressures being placed on today's vehicle manufacturers have necessitated the search for more efficient alternatives. This contribution aims to fill this need by proposing the application of an analytical technique common to engineering circles (but new to seating comfort development), namely Design Failure Mode and Effects Analysis (DFMEA). An example is offered to describe how development teams can use this systematic and disciplined approach to highlight potential seating comfort failure modes, reduce their risk, and bring capable designs to life. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Waterpipe Smoking among University Students in Sulaimaniyah, Iraqi Kurdistan: Prevalence, Attitudes, and Associated Factors

PubMed Central

Othman, Nasih; Kasem, Attallah O.; Salih, Faisal A.

2017-01-01

Background: Waterpipe smoking is increasingly becoming the most common method of tobacco use among adolescents in the Eastern Mediterranean Region. This study was undertaken in Iraqi Kurdistan to estimate its prevalence among students and investigate attitudes and factors associated with it. Materials and Methods: In a cross-sectional survey at Sulaimani Polytechnic University, 1160 students were approached in a two-stage design using a self-administered questionnaire. Data was entered into Epidata and analysis was done in Stata. Results: Prevalence of cigarette smoking was 10% and waterpipe smoking was 28% (male 49%, female 10%). Waterpipe smoking was initiated prior to joining the university in 74% of the cases and 22% of waterpipe smokers smoked every day. The most common place for smoking was coffee shops (52%) and 71% of smokers shared the pipe. The significant risk factors were smoking cigarettes (OR 10.3, 95% CI 7.0–15.0), male gender (OR 5.7, 95% CI 3.9–8.2), non-Kurdish ethnicity (OR 3.0, 95% CI 1.6–15.9), city residence (OR 1.5, 95% CI 1.0–2.1), and use of alcohol and other substances (OR 2.8 95% CI 1.4–5.6). Conclusion: Waterpipe smoking is highly prevalent among students in Iraqi Kurdistan, especially among males, and is becoming a public health problem. Tobacco control interventions should be designed specifically to address this problem among adolescents and the youth. PMID:29849676

Ontology-Driven Search and Triage: Design of a Web-Based Visual Interface for MEDLINE.

PubMed

Demelo, Jonathan; Parsons, Paul; Sedig, Kamran

2017-02-02

Diverse users need to search health and medical literature to satisfy open-ended goals such as making evidence-based decisions and updating their knowledge. However, doing so is challenging due to at least two major difficulties: (1) articulating information needs using accurate vocabulary and (2) dealing with large document sets returned from searches. Common search interfaces such as PubMed do not provide adequate support for exploratory search tasks. Our objective was to improve support for exploratory search tasks by combining two strategies in the design of an interactive visual interface by (1) using a formal ontology to help users build domain-specific knowledge and vocabulary and (2) providing multi-stage triaging support to help mitigate the information overload problem. We developed a Web-based tool, Ontology-Driven Visual Search and Triage Interface for MEDLINE (OVERT-MED), to test our design ideas. We implemented a custom searchable index of MEDLINE, which comprises approximately 25 million document citations. We chose a popular biomedical ontology, the Human Phenotype Ontology (HPO), to test our solution to the vocabulary problem. We implemented multistage triaging support in OVERT-MED, with the aid of interactive visualization techniques, to help users deal with large document sets returned from searches. Formative evaluation suggests that the design features in OVERT-MED are helpful in addressing the two major difficulties described above. Using a formal ontology seems to help users articulate their information needs with more accurate vocabulary. In addition, multistage triaging combined with interactive visualizations shows promise in mitigating the information overload problem. Our strategies appear to be valuable in addressing the two major problems in exploratory search. Although we tested OVERT-MED with a particular ontology and document collection, we anticipate that our strategies can be transferred successfully to other contexts. ©Jonathan Demelo, Paul Parsons, Kamran Sedig. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 02.02.2017.

Ontology-Driven Search and Triage: Design of a Web-Based Visual Interface for MEDLINE

PubMed Central

2017-01-01

Background Diverse users need to search health and medical literature to satisfy open-ended goals such as making evidence-based decisions and updating their knowledge. However, doing so is challenging due to at least two major difficulties: (1) articulating information needs using accurate vocabulary and (2) dealing with large document sets returned from searches. Common search interfaces such as PubMed do not provide adequate support for exploratory search tasks. Objective Our objective was to improve support for exploratory search tasks by combining two strategies in the design of an interactive visual interface by (1) using a formal ontology to help users build domain-specific knowledge and vocabulary and (2) providing multi-stage triaging support to help mitigate the information overload problem. Methods We developed a Web-based tool, Ontology-Driven Visual Search and Triage Interface for MEDLINE (OVERT-MED), to test our design ideas. We implemented a custom searchable index of MEDLINE, which comprises approximately 25 million document citations. We chose a popular biomedical ontology, the Human Phenotype Ontology (HPO), to test our solution to the vocabulary problem. We implemented multistage triaging support in OVERT-MED, with the aid of interactive visualization techniques, to help users deal with large document sets returned from searches. Results Formative evaluation suggests that the design features in OVERT-MED are helpful in addressing the two major difficulties described above. Using a formal ontology seems to help users articulate their information needs with more accurate vocabulary. In addition, multistage triaging combined with interactive visualizations shows promise in mitigating the information overload problem. Conclusions Our strategies appear to be valuable in addressing the two major problems in exploratory search. Although we tested OVERT-MED with a particular ontology and document collection, we anticipate that our strategies can be transferred successfully to other contexts. PMID:28153818

Development of a patient-centred, patient-reported outcome measure (PROM) for post-stroke cognitive rehabilitation: qualitative interviews with stroke survivors to inform design and content.

PubMed

Patchick, Emma L; Horne, Maria; Woodward-Nutt, Kate; Vail, Andy; Bowen, Audrey

2015-12-01

Improving cognition is service users' top research priority for life after stroke, and future research should include outcomes that they deem important. Patient perspectives on outcomes are collected using patient-reported outcome measures (PROMs). There is currently no patient-centred PROM specific for cognitive rehabilitation trials. Inform PROM development by exploring stroke survivor perspectives on the important, measurable impacts of persisting post-stroke cognitive problems. Qualitative semi-structured interviews in participants' homes. Purposive sample of 16 cognitively impaired stroke survivors at least six months post-stroke. Interviews used a schedule and communication aids developed through patient consultation. Interviews were transcribed verbatim with non-verbal communication recorded using field notes. Data were analysed using a framework approach to find commonalities to shape the focus and content of an outcome measure. Participants identified important impacts of their 'invisible' cognitive problems, outside of other stroke-related impairments. Cognitive problems exacerbated emotional issues and vice versa. Changes in self-identity and social participation were prominent. Impact was not spoken about in terms of frequency but rather in terms of the negative affect associated with problems; terms like 'bothered' and 'frustration' were often used. The results support the development of a PROM specifically designed to address the impact of cognitive problems. It should: include items addressing a comprehensive range of cognitive skills; ask questions about mood, self-identity and social participation; use accessible wording that respondents understand and endorse; measure impact rather than frequency; and explore perceived impact on carers. © 2014 John Wiley & Sons Ltd.

Generalized Philosophy of Alerting with Applications for Parallel Approach Collision Prevention

NASA Technical Reports Server (NTRS)

Winder, Lee F.; Kuchar, James K.

2000-01-01

The goal of the research was to develop formal guidelines for the design of hazard avoidance systems. An alerting system is automation designed to reduce the likelihood of undesirable outcomes that are due to rare failures in a human-controlled system. It accomplishes this by monitoring the system, and issuing warning messages to the human operators when thought necessary to head off a problem. On examination of existing and recently proposed logics for alerting it appears that few commonly accepted principles guide the design process. Different logics intended to address the same hazards may take disparate forms and emphasize different aspects of performance, because each reflects the intuitive priorities of a different designer. Because performance must be satisfactory to all users of an alerting system (implying a universal meaning of acceptable performance) and not just one designer, a proposed logic often undergoes significant piecemeal modification before gamma general acceptance. This report is an initial attempt to clarify the common performance goals by which an alerting system is ultimately judged. A better understanding of these goals will hopefully allow designers to reach the final logic in a quicker, more direct and repeatable manner. As a case study, this report compares three alerting logics for collision prevention during independent approaches to parallel runways, and outlines a fourth alternative incorporating elements of the first three, but satisfying stated requirements. Three existing logics for parallel approach alerting are described. Each follows from different intuitive principles. The logics are presented as examples of three "philosophies" of alerting system design.

Advantages of Task-Specific Multi-Objective Optimisation in Evolutionary Robotics.

PubMed

Trianni, Vito; López-Ibáñez, Manuel

2015-01-01

The application of multi-objective optimisation to evolutionary robotics is receiving increasing attention. A survey of the literature reveals the different possibilities it offers to improve the automatic design of efficient and adaptive robotic systems, and points to the successful demonstrations available for both task-specific and task-agnostic approaches (i.e., with or without reference to the specific design problem to be tackled). However, the advantages of multi-objective approaches over single-objective ones have not been clearly spelled out and experimentally demonstrated. This paper fills this gap for task-specific approaches: starting from well-known results in multi-objective optimisation, we discuss how to tackle commonly recognised problems in evolutionary robotics. In particular, we show that multi-objective optimisation (i) allows evolving a more varied set of behaviours by exploring multiple trade-offs of the objectives to optimise, (ii) supports the evolution of the desired behaviour through the introduction of objectives as proxies, (iii) avoids the premature convergence to local optima possibly introduced by multi-component fitness functions, and (iv) solves the bootstrap problem exploiting ancillary objectives to guide evolution in the early phases. We present an experimental demonstration of these benefits in three different case studies: maze navigation in a single robot domain, flocking in a swarm robotics context, and a strictly collaborative task in collective robotics.

Environmental trade-offs of tunnels vs cut-and-cover subways

USGS Publications Warehouse

Walton, M.

1978-01-01

Heavy construction projects in cities entail two kinds of cost - internal cost, which can be defined in terms of payments from one set of parties to another, and external cost, which is the cost borne by the community at large as the result of disutilities entailed in construction and operation. Environmental trade-offs involve external costs, which are commonly difficult to measure. Cut-and-cover subway construction probably entails higher external and internal cost than deep tunnel construction in many urban geological environments, but uncertainty concerning the costs and environmental trade-offs of tunneling leads to limited and timid use of tunneling by American designers. Thus uncertainty becomes a major trade-off which works against tunneling. The reverse is true in Sweden after nearly 30 years of subway construction. Econometric methods for measuring external costs exist in principle, but are limited in application. Economic theory based on market pressure does not address the real problem of urban environmental trade-offs. Nevertheless, the problem of uncertainty can be addressed by comparative studies of estimated and as-built costs of cut-and-cover vs tunnel projects and a review of environmental issues associated with such construction. Such a study would benefit the underground construction industry and the design of transportation systems. It would also help solve an aspect of the urban problem. ?? 1978.