Sample records for common-cause failure analysis

  1. 76 FR 70768 - Common-Cause Failure Analysis in Event and Condition Assessment: Guidance and Research, Draft...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-15

    ... NUCLEAR REGULATORY COMMISSION [NRC-2011-0254] Common-Cause Failure Analysis in Event and Condition Assessment: Guidance and Research, Draft Report for Comment; Correction AGENCY: Nuclear Regulatory Commission. ACTION: Draft NUREG; request for comment; correction. SUMMARY: This document corrects a notice appearing...

  2. COMCAN; COMCAN2A; system safety common cause analysis. [IBM360; CDC CYBER176,175; FORTRAN IV (30%) and BAL (70%) (IBM360), FORTRAN IV (97%) and COMPASS (3%) (CDC CYBER176)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Burdick, G.R.; Wilson, J.R.

    COMCAN2A and COMCAN are designed to analyze complex systems such as nuclear plants for common causes of failure. A common cause event, or common mode failure, is a secondary cause that could contribute to the failure of more than one component and violates the assumption of independence. Analysis of such events is an integral part of system reliability and safety analysis. A significant common cause event is a secondary cause common to all basic events in one or more minimal cut sets. Minimal cut sets containing events from components sharing a common location or a common link are called commonmore » cause candidates. Components share a common location if no barrier insulates any one of them from the secondary cause. A common link is a dependency among components which cannot be removed by a physical barrier (e.g., a common energy source or common maintenance instructions).IBM360;CDC CYBER176,175; FORTRAN IV (30%) and BAL (70%) (IBM360), FORTRAN IV (97%) and COMPASS (3%) (CDC CYBER176).; OS/360 (IBM360) and NOS/BE 1.4 (CDC CYBER176), NOS 1.3 (CDC CYBER175); 140K bytes of memory for COMCAN and 242K (octal) words of memory for COMCAN2A.« less

  3. Common Cause Failure Modes

    NASA Technical Reports Server (NTRS)

    Wetherholt, Jon; Heimann, Timothy J.; Anderson, Brenda

    2011-01-01

    High technology industries with high failure costs commonly use redundancy as a means to reduce risk. Redundant systems, whether similar or dissimilar, are susceptible to Common Cause Failures (CCF). CCF is not always considered in the design effort and, therefore, can be a major threat to success. There are several aspects to CCF which must be understood to perform an analysis which will find hidden issues that may negate redundancy. This paper will provide definition, types, a list of possible causes and some examples of CCF. Requirements and designs from NASA projects will be used in the paper as examples.

  4. Common Cause Failures and Ultra Reliability

    NASA Technical Reports Server (NTRS)

    Jones, Harry W.

    2012-01-01

    A common cause failure occurs when several failures have the same origin. Common cause failures are either common event failures, where the cause is a single external event, or common mode failures, where two systems fail in the same way for the same reason. Common mode failures can occur at different times because of a design defect or a repeated external event. Common event failures reduce the reliability of on-line redundant systems but not of systems using off-line spare parts. Common mode failures reduce the dependability of systems using off-line spare parts and on-line redundancy.

  5. Fault tree analysis of most common rolling bearing tribological failures

    NASA Astrophysics Data System (ADS)

    Vencl, Aleksandar; Gašić, Vlada; Stojanović, Blaža

    2017-02-01

    Wear as a tribological process has a major influence on the reliability and life of rolling bearings. Field examinations of bearing failures due to wear indicate possible causes and point to the necessary measurements for wear reduction or elimination. Wear itself is a very complex process initiated by the action of different mechanisms, and can be manifested by different wear types which are often related. However, the dominant type of wear can be approximately determined. The paper presents the classification of most common bearing damages according to the dominant wear type, i.e. abrasive wear, adhesive wear, surface fatigue wear, erosive wear, fretting wear and corrosive wear. The wear types are correlated with the terms used in ISO 15243 standard. Each wear type is illustrated with an appropriate photograph, and for each wear type, appropriate description of causes and manifestations is presented. Possible causes of rolling bearing failure are used for the fault tree analysis (FTA). It was performed to determine the root causes for bearing failures. The constructed fault tree diagram for rolling bearing failure can be useful tool for maintenance engineers.

  6. Common Cause Failure Modeling: Aerospace Versus Nuclear

    NASA Technical Reports Server (NTRS)

    Stott, James E.; Britton, Paul; Ring, Robert W.; Hark, Frank; Hatfield, G. Spencer

    2010-01-01

    Aggregate nuclear plant failure data is used to produce generic common-cause factors that are specifically for use in the common-cause failure models of NUREG/CR-5485. Furthermore, the models presented in NUREG/CR-5485 are specifically designed to incorporate two significantly distinct assumptions about the methods of surveillance testing from whence this aggregate failure data came. What are the implications of using these NUREG generic factors to model the common-cause failures of aerospace systems? Herein, the implications of using the NUREG generic factors in the modeling of aerospace systems are investigated in detail and strong recommendations for modeling the common-cause failures of aerospace systems are given.

  7. Common Cause Failure Modeling

    NASA Technical Reports Server (NTRS)

    Hark, Frank; Britton, Paul; Ring, Robert; Novack, Steven

    2015-01-01

    Space Launch System (SLS) Agenda: Objective; Key Definitions; Calculating Common Cause; Examples; Defense against Common Cause; Impact of varied Common Cause Failure (CCF) and abortability; Response Surface for various CCF Beta; Takeaways.

  8. Modeling Common Cause Failures of Thrusters on ISS Visiting Vehicles

    NASA Technical Reports Server (NTRS)

    Haught, Megan

    2014-01-01

    This paper discusses the methodology used to model common cause failures of thrusters on the International Space Station (ISS) Visiting Vehicles. The ISS Visiting Vehicles each have as many as 32 thrusters, whose redundancy makes them susceptible to common cause failures. The Global Alpha Model (as described in NUREG/CR-5485) can be used to represent the system common cause contribution, but NUREG/CR-5496 supplies global alpha parameters for groups only up to size six. Because of the large number of redundant thrusters on each vehicle, regression is used to determine parameter values for groups of size larger than six. An additional challenge is that Visiting Vehicle thruster failures must occur in specific combinations in order to fail the propulsion system; not all failure groups of a certain size are critical.

  9. Techniques to evaluate the importance of common cause degradation on reliability and safety of nuclear weapons.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Darby, John L.

    2011-05-01

    As the nuclear weapon stockpile ages, there is increased concern about common degradation ultimately leading to common cause failure of multiple weapons that could significantly impact reliability or safety. Current acceptable limits for the reliability and safety of a weapon are based on upper limits on the probability of failure of an individual item, assuming that failures among items are independent. We expanded the current acceptable limits to apply to situations with common cause failure. Then, we developed a simple screening process to quickly assess the importance of observed common degradation for both reliability and safety to determine if furthermore » action is necessary. The screening process conservatively assumes that common degradation is common cause failure. For a population with between 100 and 5000 items we applied the screening process and conclude the following. In general, for a reliability requirement specified in the Military Characteristics (MCs) for a specific weapon system, common degradation is of concern if more than 100(1-x)% of the weapons are susceptible to common degradation, where x is the required reliability expressed as a fraction. Common degradation is of concern for the safety of a weapon subsystem if more than 0.1% of the population is susceptible to common degradation. Common degradation is of concern for the safety of a weapon component or overall weapon system if two or more components/weapons in the population are susceptible to degradation. Finally, we developed a technique for detailed evaluation of common degradation leading to common cause failure for situations that are determined to be of concern using the screening process. The detailed evaluation requires that best estimates of common cause and independent failure probabilities be produced. Using these techniques, observed common degradation can be evaluated for effects on reliability and safety.« less

  10. AADL Fault Modeling and Analysis Within an ARP4761 Safety Assessment

    DTIC Science & Technology

    2014-10-01

    Analysis Generator 27 3.2.3 Mapping to OpenFTA Format File 27 3.2.4 Mapping to Generic XML Format 28 3.2.5 AADL and FTA Mapping Rules 28 3.2.6 Issues...PSSA), System Safety Assessment (SSA), Common Cause Analysis (CCA), Fault Tree Analysis ( FTA ), Failure Modes and Effects Analysis (FMEA), Failure...Modes and Effects Summary, Mar - kov Analysis (MA), and Dependence Diagrams (DDs), also referred to as Reliability Block Dia- grams (RBDs). The

  11. Modeling Common Cause Failures of Thrusters on ISS Visiting Vehicles

    NASA Technical Reports Server (NTRS)

    Haught, Megan; Duncan, Gary

    2014-01-01

    This paper discusses the methodology used to model common cause failures of thrusters on the International Space Station (ISS) Visiting Vehicles. The ISS Visiting Vehicles each have as many as 32 thrusters, whose redundancy and similar design make them susceptible to common cause failures. The Global Alpha Model (as described in NUREG/CR-5485) can be used to represent the system common cause contribution, but NUREG/CR-5496 supplies global alpha parameters for groups only up to size six. Because of the large number of redundant thrusters on each vehicle, regression is used to determine parameter values for groups of size larger than six. An additional challenge is that Visiting Vehicle thruster failures must occur in specific combinations in order to fail the propulsion system; not all failure groups of a certain size are critical.

  12. Common-Cause Failure Treatment in Event Assessment: Basis for a Proposed New Model

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dana Kelly; Song-Hua Shen; Gary DeMoss

    2010-06-01

    Event assessment is an application of probabilistic risk assessment in which observed equipment failures and outages are mapped into the risk model to obtain a numerical estimate of the event’s risk significance. In this paper, we focus on retrospective assessments to estimate the risk significance of degraded conditions such as equipment failure accompanied by a deficiency in a process such as maintenance practices. In modeling such events, the basic events in the risk model that are associated with observed failures and other off-normal situations are typically configured to be failed, while those associated with observed successes and unchallenged components aremore » assumed capable of failing, typically with their baseline probabilities. This is referred to as the failure memory approach to event assessment. The conditioning of common-cause failure probabilities for the common cause component group associated with the observed component failure is particularly important, as it is insufficient to simply leave these probabilities at their baseline values, and doing so may result in a significant underestimate of risk significance for the event. Past work in this area has focused on the mathematics of the adjustment. In this paper, we review the Basic Parameter Model for common-cause failure, which underlies most current risk modelling, discuss the limitations of this model with respect to event assessment, and introduce a proposed new framework for common-cause failure, which uses a Bayesian network to model underlying causes of failure, and which has the potential to overcome the limitations of the Basic Parameter Model with respect to event assessment.« less

  13. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Matthias C. M. Troffaes; Gero Walter; Dana Kelly

    In a standard Bayesian approach to the alpha-factor model for common-cause failure, a precise Dirichlet prior distribution models epistemic uncertainty in the alpha-factors. This Dirichlet prior is then updated with observed data to obtain a posterior distribution, which forms the basis for further inferences. In this paper, we adapt the imprecise Dirichlet model of Walley to represent epistemic uncertainty in the alpha-factors. In this approach, epistemic uncertainty is expressed more cautiously via lower and upper expectations for each alpha-factor, along with a learning parameter which determines how quickly the model learns from observed data. For this application, we focus onmore » elicitation of the learning parameter, and find that values in the range of 1 to 10 seem reasonable. The approach is compared with Kelly and Atwood's minimally informative Dirichlet prior for the alpha-factor model, which incorporated precise mean values for the alpha-factors, but which was otherwise quite diffuse. Next, we explore the use of a set of Gamma priors to model epistemic uncertainty in the marginal failure rate, expressed via a lower and upper expectation for this rate, again along with a learning parameter. As zero counts are generally less of an issue here, we find that the choice of this learning parameter is less crucial. Finally, we demonstrate how both epistemic uncertainty models can be combined to arrive at lower and upper expectations for all common-cause failure rates. Thereby, we effectively provide a full sensitivity analysis of common-cause failure rates, properly reflecting epistemic uncertainty of the analyst on all levels of the common-cause failure model.« less

  14. 76 FR 67764 - Common-Cause Failure Analysis in Event and Condition Assessment: Guidance and Research, Draft...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-02

    ...: Song-Hua Shen, Division of Risk Analysis, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001; telephone: (301) 251- 7571, email: Song-Hua.Shen@nrc.gov...

  15. [Hazard function and life table: an introduction to the failure time analysis].

    PubMed

    Matsushita, K; Inaba, H

    1987-04-01

    Failure time analysis has become popular in demographic studies. It can be viewed as a part of regression analysis with limited dependent variables as well as a special case of event history analysis and multistate demography. The idea of hazard function and failure time analysis, however, has not been properly introduced to nor commonly discussed by demographers in Japan. The concept of hazard function in comparison with life tables is briefly described, where the force of mortality is interchangeable with the hazard rate. The basic idea of failure time analysis is summarized for the cases of exponential distribution, normal distribution, and proportional hazard models. The multiple decrement life table is also introduced as an example of lifetime data analysis with cause-specific hazard rates.

  16. High-Output Heart Failure Caused by Thyrotoxicosis and Beriberi.

    PubMed

    McCulloch, Brenda

    2015-12-01

    High-output heart failure is not seen as commonly as low-output heart failure and some of the typical guideline recommendations may not benefit patients with high-output failure. High-output failure is caused by several diseases, including thyrotoxicosis and beriberi, highlighted in this article. Thyrotoxicosis, caused by excessive thyroid hormone production, has profound hemodynamic effects. Wet beriberi, affecting predominately the cardiovascular system, is caused by severe thiamine deficiency, most commonly seen in patients with chronic alcoholism or poor nutrition from other causes. Prompt recognition of these infrequently seen syndromes is essential. This article outlines the medical treatment and nursing care needed to return these patients to a normal state. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Failure environment analysis tool applications

    NASA Astrophysics Data System (ADS)

    Pack, Ginger L.; Wadsworth, David B.

    1993-02-01

    Understanding risks and avoiding failure are daily concerns for the women and men of NASA. Although NASA's mission propels us to push the limits of technology, and though the risks are considerable, the NASA community has instilled within, the determination to preserve the integrity of the systems upon which our mission and, our employees lives and well-being depend. One of the ways this is being done is by expanding and improving the tools used to perform risk assessment. The Failure Environment Analysis Tool (FEAT) was developed to help engineers and analysts more thoroughly and reliably conduct risk assessment and failure analysis. FEAT accomplishes this by providing answers to questions regarding what might have caused a particular failure; or, conversely, what effect the occurrence of a failure might have on an entire system. Additionally, FEAT can determine what common causes could have resulted in other combinations of failures. FEAT will even help determine the vulnerability of a system to failures, in light of reduced capability. FEAT also is useful in training personnel who must develop an understanding of particular systems. FEAT facilitates training on system behavior, by providing an automated environment in which to conduct 'what-if' evaluation. These types of analyses make FEAT a valuable tool for engineers and operations personnel in the design, analysis, and operation of NASA space systems.

  18. Failure environment analysis tool applications

    NASA Technical Reports Server (NTRS)

    Pack, Ginger L.; Wadsworth, David B.

    1993-01-01

    Understanding risks and avoiding failure are daily concerns for the women and men of NASA. Although NASA's mission propels us to push the limits of technology, and though the risks are considerable, the NASA community has instilled within, the determination to preserve the integrity of the systems upon which our mission and, our employees lives and well-being depend. One of the ways this is being done is by expanding and improving the tools used to perform risk assessment. The Failure Environment Analysis Tool (FEAT) was developed to help engineers and analysts more thoroughly and reliably conduct risk assessment and failure analysis. FEAT accomplishes this by providing answers to questions regarding what might have caused a particular failure; or, conversely, what effect the occurrence of a failure might have on an entire system. Additionally, FEAT can determine what common causes could have resulted in other combinations of failures. FEAT will even help determine the vulnerability of a system to failures, in light of reduced capability. FEAT also is useful in training personnel who must develop an understanding of particular systems. FEAT facilitates training on system behavior, by providing an automated environment in which to conduct 'what-if' evaluation. These types of analyses make FEAT a valuable tool for engineers and operations personnel in the design, analysis, and operation of NASA space systems.

  19. Failure environment analysis tool applications

    NASA Technical Reports Server (NTRS)

    Pack, Ginger L.; Wadsworth, David B.

    1994-01-01

    Understanding risks and avoiding failure are daily concerns for the women and men of NASA. Although NASA's mission propels us to push the limits of technology, and though the risks are considerable, the NASA community has instilled within it, the determination to preserve the integrity of the systems upon which our mission and, our employees lives and well-being depend. One of the ways this is being done is by expanding and improving the tools used to perform risk assessment. The Failure Environment Analysis Tool (FEAT) was developed to help engineers and analysts more thoroughly and reliably conduct risk assessment and failure analysis. FEAT accomplishes this by providing answers to questions regarding what might have caused a particular failure; or, conversely, what effect the occurrence of a failure might have on an entire system. Additionally, FEAT can determine what common causes could have resulted in other combinations of failures. FEAT will even help determine the vulnerability of a system to failures, in light of reduced capability. FEAT also is useful in training personnel who must develop an understanding of particular systems. FEAT facilitates training on system behavior, by providing an automated environment in which to conduct 'what-if' evaluation. These types of analyses make FEAT a valuable tool for engineers and operations personnel in the design, analysis, and operation of NASA space systems.

  20. Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

    NASA Technical Reports Server (NTRS)

    Flores, Melissa; Malin, Jane T.

    2013-01-01

    An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component s functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

  1. Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

    NASA Astrophysics Data System (ADS)

    Flores, Melissa D.; Malin, Jane T.; Fleming, Land D.

    2013-09-01

    An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component's functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

  2. Report of the Odyssey FPGA Independent Assessment Team

    NASA Technical Reports Server (NTRS)

    Mayer, Donald C.; Katz, Richard B.; Osborn, Jon V.; Soden, Jerry M.; Barto, R.; Day, John H. (Technical Monitor)

    2001-01-01

    An independent assessment team (IAT) was formed and met on April 2, 2001, at Lockheed Martin in Denver, Colorado, to aid in understanding a technical issue for the Mars Odyssey spacecraft scheduled for launch on April 7, 2001. An RP1280A field-programmable gate array (FPGA) from a lot of parts common to the SIRTF, Odyssey, and Genesis missions had failed on a SIRTF printed circuit board. A second FPGA from an earlier Odyssey circuit board was also known to have failed and was also included in the analysis by the IAT. Observations indicated an abnormally high failure rate for flight RP1280A devices (the first flight lot produced using this flow) at Lockheed Martin and the causes of these failures were not determined. Standard failure analysis techniques were applied to these parts, however, additional diagnostic techniques unique for devices of this class were not used, and the parts were prematurely submitted to a destructive physical analysis, making a determination of the root cause of failure difficult. Any of several potential failure scenarios may have caused these failures, including electrostatic discharge, electrical overstress, manufacturing defects, board design errors, board manufacturing errors, FPGA design errors, or programmer errors. Several of these mechanisms would have relatively benign consequences for disposition of the parts currently installed on boards in the Odyssey spacecraft if established as the root cause of failure. However, other potential failure mechanisms could have more dire consequences. As there is no simple way to determine the likely failure mechanisms with reasonable confidence before Odyssey launch, it is not possible for the IAT to recommend a disposition for the other parts on boards in the Odyssey spacecraft based on sound engineering principles.

  3. Common Cause Failure Modeling

    NASA Technical Reports Server (NTRS)

    Hark, Frank; Britton, Paul; Ring, Rob; Novack, Steven D.

    2016-01-01

    Common Cause Failures (CCFs) are a known and documented phenomenon that defeats system redundancy. CCFS are a set of dependent type of failures that can be caused by: system environments; manufacturing; transportation; storage; maintenance; and assembly, as examples. Since there are many factors that contribute to CCFs, the effects can be reduced, but they are difficult to eliminate entirely. Furthermore, failure databases sometimes fail to differentiate between independent and CCF (dependent) failure and data is limited, especially for launch vehicles. The Probabilistic Risk Assessment (PRA) of NASA's Safety and Mission Assurance Directorate at Marshal Space Flight Center (MFSC) is using generic data from the Nuclear Regulatory Commission's database of common cause failures at nuclear power plants to estimate CCF due to the lack of a more appropriate data source. There remains uncertainty in the actual magnitude of the common cause risk estimates for different systems at this stage of the design. Given the limited data about launch vehicle CCF and that launch vehicles are a highly redundant system by design, it is important to make design decisions to account for a range of values for independent and CCFs. When investigating the design of the one-out-of-two component redundant system for launch vehicles, a response surface was constructed to represent the impact of the independent failure rate versus a common cause beta factor effect on a system's failure probability. This presentation will define a CCF and review estimation calculations. It gives a summary of reduction methodologies and a review of examples of historical CCFs. Finally, it presents the response surface and discusses the results of the different CCFs on the reliability of a one-out-of-two system.

  4. Common Cause Failure Modeling

    NASA Technical Reports Server (NTRS)

    Hark, Frank; Britton, Paul; Ring, Rob; Novack, Steven D.

    2015-01-01

    Common Cause Failures (CCFs) are a known and documented phenomenon that defeats system redundancy. CCFS are a set of dependent type of failures that can be caused by: system environments; manufacturing; transportation; storage; maintenance; and assembly, as examples. Since there are many factors that contribute to CCFs, the effects can be reduced, but they are difficult to eliminate entirely. Furthermore, failure databases sometimes fail to differentiate between independent and CCF (dependent) failure and data is limited, especially for launch vehicles. The Probabilistic Risk Assessment (PRA) of NASA's Safety and Mission Assurance Directorate at Marshall Space Flight Center (MFSC) is using generic data from the Nuclear Regulatory Commission's database of common cause failures at nuclear power plants to estimate CCF due to the lack of a more appropriate data source. There remains uncertainty in the actual magnitude of the common cause risk estimates for different systems at this stage of the design. Given the limited data about launch vehicle CCF and that launch vehicles are a highly redundant system by design, it is important to make design decisions to account for a range of values for independent and CCFs. When investigating the design of the one-out-of-two component redundant system for launch vehicles, a response surface was constructed to represent the impact of the independent failure rate versus a common cause beta factor effect on a system's failure probability. This presentation will define a CCF and review estimation calculations. It gives a summary of reduction methodologies and a review of examples of historical CCFs. Finally, it presents the response surface and discusses the results of the different CCFs on the reliability of a one-out-of-two system.

  5. Causes of Coal Mine Accidents in the World and Turkey.

    PubMed

    Küçük, Filiz Çağla Uyanusta; Ilgaz, Aslıhan

    2015-04-01

    Occupational accidents and occupational diseases are common in the mining sector in Turkey and throughout the world. The most common causes of accidents in coal mining are firedamp and dust explosions, landslips, mine fires, and technical failures related to transport and mechanization. An analysis of occupational accidents in the consideration of social and economic factors will let understand the real causes behind these accidents, which are said to happen inevitably due to technical deficiencies or failures. Irregular working conditions, based on profit maximization and cost minimization, are related to strategic operational preferences and public policies. Proving that accidents in mines, where occupational health and safety measures are not implemented and inspections are not done properly or at all, are caused by the fact that production is imposed to be carried out in the fastest, cheapest, and most profitable way will allow us to take steps to prevent further mine accidents.

  6. Causes of Coal Mine Accidents in the World and Turkey

    PubMed Central

    Küçük, Filiz Çağla Uyanusta; Ilgaz, Aslıhan

    2015-01-01

    Occupational accidents and occupational diseases are common in the mining sector in Turkey and throughout the world. The most common causes of accidents in coal mining are firedamp and dust explosions, landslips, mine fires, and technical failures related to transport and mechanization. An analysis of occupational accidents in the consideration of social and economic factors will let understand the real causes behind these accidents, which are said to happen inevitably due to technical deficiencies or failures. Irregular working conditions, based on profit maximization and cost minimization, are related to strategic operational preferences and public policies. Proving that accidents in mines, where occupational health and safety measures are not implemented and inspections are not done properly or at all, are caused by the fact that production is imposed to be carried out in the fastest, cheapest, and most profitable way will allow us to take steps to prevent further mine accidents. PMID:29404108

  7. Failure of endodontic treatment: The usual suspects.

    PubMed

    Tabassum, Sadia; Khan, Farhan Raza

    2016-01-01

    Inappropriate mechanical debridement, persistence of bacteria in the canals and apex, poor obturation quality, over and under extension of the root canal filling, and coronal leakage are some of the commonly attributable causes of failure. Despite the high success rate of endodontic treatment, failures do occur in a large number of cases and most of the times can be attributed to the already stated causes. With an ever increasing number of endodontic treatments being done each day, it has become imperative to avoid or minimize the most fundamental of reasons leading to endodontic failure. This paper reviews the most common causes of endodontic failure along with radiographic examples.

  8. Failure of endodontic treatment: The usual suspects

    PubMed Central

    Tabassum, Sadia; Khan, Farhan Raza

    2016-01-01

    Inappropriate mechanical debridement, persistence of bacteria in the canals and apex, poor obturation quality, over and under extension of the root canal filling, and coronal leakage are some of the commonly attributable causes of failure. Despite the high success rate of endodontic treatment, failures do occur in a large number of cases and most of the times can be attributed to the already stated causes. With an ever increasing number of endodontic treatments being done each day, it has become imperative to avoid or minimize the most fundamental of reasons leading to endodontic failure. This paper reviews the most common causes of endodontic failure along with radiographic examples. PMID:27011754

  9. Equipment failures and their contribution to industrial incidents and accidents in the manufacturing industry.

    PubMed

    Bourassa, Dominic; Gauthier, François; Abdul-Nour, Georges

    2016-01-01

    Accidental events in manufacturing industries can be caused by many factors, including work methods, lack of training, equipment design, maintenance and reliability. This study is aimed at determining the contribution of failures of commonly used industrial equipment, such as machines, tools and material handling equipment, to the chain of causality of industrial accidents and incidents. Based on a case study which aimed at the analysis of an existing pulp and paper company's accident database, this paper examines the number, type and gravity of the failures involved in these events and their causes. Results from this study show that equipment failures had a major effect on the number and severity of accidents accounted for in the database: 272 out of 773 accidental events were related to equipment failure, where 13 of them had direct human consequences. Failures that contributed directly or indirectly to these events are analyzed.

  10. Risk analysis by FMEA as an element of analytical validation.

    PubMed

    van Leeuwen, J F; Nauta, M J; de Kaste, D; Odekerken-Rombouts, Y M C F; Oldenhof, M T; Vredenbregt, M J; Barends, D M

    2009-12-05

    We subjected a Near-Infrared (NIR) analytical procedure used for screening drugs on authenticity to a Failure Mode and Effects Analysis (FMEA), including technical risks as well as risks related to human failure. An FMEA team broke down the NIR analytical method into process steps and identified possible failure modes for each step. Each failure mode was ranked on estimated frequency of occurrence (O), probability that the failure would remain undetected later in the process (D) and severity (S), each on a scale of 1-10. Human errors turned out to be the most common cause of failure modes. Failure risks were calculated by Risk Priority Numbers (RPNs)=O x D x S. Failure modes with the highest RPN scores were subjected to corrective actions and the FMEA was repeated, showing reductions in RPN scores and resulting in improvement indices up to 5.0. We recommend risk analysis as an addition to the usual analytical validation, as the FMEA enabled us to detect previously unidentified risks.

  11. Common cause evaluations in applied risk analysis of nuclear power plants. [PWR

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Taniguchi, T.; Ligon, D.; Stamatelatos, M.

    1983-04-01

    Qualitative and quantitative approaches were developed for the evaluation of common cause failures (CCFs) in nuclear power plants and were applied to the analysis of the auxiliary feedwater systems of several pressurized water reactors (PWRs). Key CCF variables were identified through a survey of experts in the field and a review of failure experience in operating PWRs. These variables were classified into categories of high, medium, and low defense against a CCF. Based on the results, a checklist was developed for analyzing CCFs of systems. Several known techniques for quantifying CCFs were also reviewed. The information provided valuable insights inmore » the development of a new model for estimating CCF probabilities, which is an extension of and improvement over the Beta Factor method. As applied to the analysis of the PWR auxiliary feedwater systems, the method yielded much more realistic values than the original Beta Factor method for a one-out-of-three system.« less

  12. 77 FR 5857 - Common-Cause Failure Analysis in Event and Condition Assessment: Guidance and Research, Draft...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-06

    ... comments to: RADB at (301) 492-3446. FOR FURTHER INFORMATION CONTACT: Song-Hua Shen, Division of Risk...-0001; telephone: (301) 251- 7571, email: Song-Hua.Shen@nrc.gov . SUPPLEMENTARY INFORMATION: Submitting...

  13. Common Cause Failure Modeling in Space Launch Vehicles

    NASA Technical Reports Server (NTRS)

    Hark, Frank; Ring, Rob; Novack, Steven D.; Britton, Paul

    2015-01-01

    Common Cause Failures (CCFs) are a known and documented phenomenon that defeats system redundancy. CCFs are a set of dependent type of failures that can be caused for example by system environments, manufacturing, transportation, storage, maintenance, and assembly. Since there are many factors that contribute to CCFs, they can be reduced, but are difficult to eliminate entirely. Furthermore, failure databases sometimes fail to differentiate between independent and dependent CCF. Because common cause failure data is limited in the aerospace industry, the Probabilistic Risk Assessment (PRA) Team at Bastion Technology Inc. is estimating CCF risk using generic data collected by the Nuclear Regulatory Commission (NRC). Consequently, common cause risk estimates based on this database, when applied to other industry applications, are highly uncertain. Therefore, it is important to account for a range of values for independent and CCF risk and to communicate the uncertainty to decision makers. There is an existing methodology for reducing CCF risk during design, which includes a checklist of 40+ factors grouped into eight categories. Using this checklist, an approach to produce a beta factor estimate is being investigated that quantitatively relates these factors. In this example, the checklist will be tailored to space launch vehicles, a quantitative approach will be described, and an example of the method will be presented.

  14. Causes of Death Following Transcatheter Aortic Valve Replacement: A Systematic Review and Meta-Analysis.

    PubMed

    Xiong, Tian-Yuan; Liao, Yan-Biao; Zhao, Zhen-Gang; Xu, Yuan-Ning; Wei, Xin; Zuo, Zhi-Liang; Li, Yi-Jian; Cao, Jia-Yu; Tang, Hong; Jilaihawi, Hasan; Feng, Yuan; Chen, Mao

    2015-09-21

    Transcatheter aortic valve replacement (TAVR) is an effective alternative to surgical aortic valve replacement in patients at high surgical risk. However, there is little published literature on the exact causes of death. The PubMed database was systematically searched for studies reporting causes of death within and after 30 days following TAVR. Twenty-eight studies out of 3934 results retrieved were identified. In the overall analysis, 46.4% and 51.6% of deaths were related to noncardiovascular causes within and after the first 30 days, respectively. Within 30 days of TAVR, infection/sepsis (18.5%), heart failure (14.7%), and multiorgan failure (13.2%) were the top 3 causes of death. Beyond 30 days, infection/sepsis (14.3%), heart failure (14.1%), and sudden death (10.8%) were the most common causes. All possible subgroup analyses were made. No significant differences were seen for proportions of cardiovascular deaths except the comparison between moderate (mean STS score 4 to 8) and high (mean STS score >8) -risk patients after 30 days post-TAVR (56.0% versus 33.5%, P=0.005). Cardiovascular and noncardiovascular causes of death are evenly balanced both in the perioperative period and at long-term follow-up after TAVR. Infection/sepsis and heart failure were the most frequent noncardiovascular and cardiovascular causes of death. This study highlights important areas of clinical focus that could further improve outcomes after TAVR. © 2015 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

  15. Acute liver failure caused by hepatitis E virus genotype 3 and 4: A systematic review and pooled analysis.

    PubMed

    Haffar, Samir; Shalimar; Kaur, Ravinder J; Wang, Zhen; Prokop, Larry J; Murad, Mohammad H; Bazerbachi, Fateh

    2018-04-19

    Acute liver failure caused by hepatitis E virus genotype 3 and 4 has been rarely described. Because of the presence of a short golden therapeutic window in patients with viral acute liver failure from other causes, it is possible that early recognition and treatment might reduce the morbidity and mortality. We performed a systematic review and pooled analysis of acute liver failure caused by hepatitis E virus genotype 3 and 4. Two reviewers appraised studies after searching multiple databases on June 12th, 2017. Appropriate tests were used to compare hepatitis E virus genotype 3 vs 4, suspected vs confirmed genotypes, hepatitis E virus-RNA positive vs negative, and to discern important mortality risk factors. We identified 65 patients, with median age 58 years (range: 3-79), and a male to female ratio of 1.2:1. The median bilirubin, ALT, AST and alkaline phosphatase (expressed by multiplication of the upper limit of normal) levels were 14.8, 45.3, 34.8 and 1.63 respectively. Antihepatitis E virus IgG, antihepatitis E virus IgM and hepatitis E virus-RNA were positive in 84%, 91% and 86% of patients respectively. The median interval from symptoms onset to acute liver failure was 23 days, and 16 patients underwent liver transplantation. Final outcome was reported in 58 patients and mortality was 46%. Age was a predictor of poor prognosis in multivariate analysis. No important differences were found between patients infected with genotype 3 vs 4, patients with confirmed vs suspected genotypes, or patients with positive vs negative RNA. Acute liver failure caused by hepatitis E virus genotype 3 and 4 is rare, similar between genotypes, occurs commonly in middle-aged/elderly patients and has a very high mortality. Age is predictive of poor prognosis in multivariate analysis. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  16. [Application of root cause analysis in healthcare].

    PubMed

    Hsu, Tsung-Fu

    2007-12-01

    The main purpose of this study was to explore various aspects of root cause analysis (RCA), including its definition, rationale concept, main objective, implementation procedures, most common analysis methodology (fault tree analysis, FTA), and advantages and methodologic limitations in regard to healthcare. Several adverse events that occurred at a certain hospital were also analyzed by the author using FTA as part of this study. RCA is a process employed to identify basic and contributing causal factors underlying performance variations associated with adverse events. The rationale concept of RCA offers a systemic approach to improving patient safety that does not assign blame or liability to individuals. The four-step process involved in conducting an RCA includes: RCA preparation, proximate cause identification, root cause identification, and recommendation generation and implementation. FTA is a logical, structured process that can help identify potential causes of system failure before actual failures occur. Some advantages and significant methodologic limitations of RCA were discussed. Finally, we emphasized that errors stem principally from faults attributable to system design, practice guidelines, work conditions, and other human factors, which induce health professionals to make negligence or mistakes with regard to healthcare. We must explore the root causes of medical errors to eliminate potential RCA system failure factors. Also, a systemic approach is needed to resolve medical errors and move beyond a current culture centered on assigning fault to individuals. In constructing a real environment of patient-centered safety healthcare, we can help encourage clients to accept state-of-the-art healthcare services.

  17. Etiologic analysis of 100 anatomically failed dacryocystorhinostomies

    PubMed Central

    Dave, Tarjani Vivek; Mohammed, Faraz Ali; Ali, Mohammad Javed; Naik, Milind N

    2016-01-01

    Background The aim of this study was to assess the etiological factors contributing to the failure of a dacryocystorhinostomy (DCR). Patients and methods Retrospective review was performed in 100 consecutive patients who were diagnosed with anatomically failed DCR at presentation to a tertiary care hospital over a 5-year period from 2010 to 2015. Patient records were reviewed for demographic data, type of past surgery, preoperative endoscopic findings, previous use of adjuvants such as intubation and mitomycin C, and intraoperative notes during the re-revision. The potential etiological factors for failure were noted. Results Of the 100 patients with failed DCRs, the primary surgery was an external DCR in 73 and endoscopic DCR in 27 patients. Six patients in each group had multiple revisions. The mean ages at presentation in the external and endoscopic groups were 39.41 years and 37.19 years, respectively. All patients presented with epiphora. The most common causes of failure were inadequate osteotomy (69.8% in the external group and 85.1% in the endoscopic group, P=0.19) followed by inadequate or inappropriate sac marsupialization (60.2% in the external group and 77.7% in the endoscopic group, P=0.16) and cicatricial closure of the ostium (50.6% in the external group and 55.5% in the endoscopic group, P=0.83). The least common causes such as ostium granulomas and paradoxical middle turbinate (1.37%, n=1) were noted in the external group only. Conclusion Inadequate osteotomy, incomplete sac marsupialization, and cicatricial closure of the ostium were the most common causes of failure and did not significantly differ in the external and endoscopic groups. Meticulous evaluation to identify causative factors for failure and addressing them are crucial for subsequent successful outcomes. PMID:27555748

  18. The Obesity and Heart Failure Epidemics Among African Americans: Insights From the Jackson Heart Study.

    PubMed

    Krishnamoorthy, Arun; Greiner, Melissa A; Bertoni, Alain G; Eapen, Zubin J; O'Brien, Emily C; Curtis, Lesley H; Hernandez, Adrian F; Mentz, Robert J

    2016-08-01

    Higher rates of obesity and heart failure have been observed in African Americans, but associations with mortality are not well-described. We examined intermediate and long-term clinical implications of obesity in African Americans and associations between obesity and all-cause mortality, heart failure, and heart failure hospitalization. We conducted a retrospective analysis of a community sample of 5292 African Americans participating in the Jackson Heart Study between September 2000 and January 2013. The main outcomes were associations between body mass index (BMI) and all-cause mortality at 9 years and heart failure hospitalization at 7 years using Cox proportional hazards models and interval development of heart failure (median 8 years' follow-up) using a modified Poisson model. At baseline, 1406 (27%) participants were obese and 1416 (27%) were morbidly obese. With increasing BMI, the cumulative incidence of mortality decreased (P= .007), whereas heart failure increased (P < .001). Heart failure hospitalization was more common among morbidly obese participants (9.0%; 95% confidence interval [CI] 7.6-11.7) than among normal-weight patients (6.3%; 95% CI 4.7-8.4). After risk adjustment, BMI was not associated with mortality. Each 1-point increase in BMI was associated with a 5% increase in the risk of heart failure (hazard ratio 1.05; 95% CI 1.03-1.06; P < .001) and the risk of heart failure hospitalization for BMI greater than 32 kg/m(2) (hazard ratio 1.05; 95% CI 1.03-1.07; P < .001). Obesity and morbid obesity were common in a community sample of African Americans, and both were associated with increased heart failure and heart failure hospitalization. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. Analysis of particulates on tape lift samples

    NASA Astrophysics Data System (ADS)

    Moision, Robert M.; Chaney, John A.; Panetta, Chris J.; Liu, De-Ling

    2014-09-01

    Particle counts on tape lift samples taken from a hardware surface exceeded threshold requirements in six successive tests despite repeated cleaning of the surface. Subsequent analysis of the particle size distributions of the failed tests revealed that the handling and processing of the tape lift samples may have played a role in the test failures. In order to explore plausible causes for the observed size distribution anomalies, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were employed to perform chemical analysis on collected particulates. SEM/EDX identified Na and S containing particles on the hardware samples in a size range identified as being responsible for the test failures. ToF-SIMS was employed to further examine the Na and S containing particulates and identified the molecular signature of sodium alkylbenzene sulfonates, a common surfactant used in industrial detergent. The root cause investigation suggests that the tape lift test failures originated from detergent residue left behind on the glass slides used to mount and transport the tape following sampling and not from the hardware surface.

  20. 75 FR 51931 - Airworthiness Directives; Dassault-Aviation Model FALCON 7X Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-24

    ... root cause: A leakage failure mode of Transient Voltage Suppressor (TVS) diodes used on Power... condition is a leakage failure mode of TVS diodes used on PDCU cards or GCU cards in the PPDB, which in... discovery of a common root cause: A leakage failure mode of Transient Voltage Suppressor (TVS) diodes used...

  1. 77 FR 61446 - Proposed Revision Probabilistic Risk Assessment and Severe Accident Evaluation for New Reactors

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-09

    ... documents online in the NRC Library at http://www.nrc.gov/reading-rm/adams.html . To begin the search... of digital instrumentation and control system PRAs, including common cause failures in PRAs and uncertainty analysis associated with new reactor digital systems, and (4) incorporation of additional...

  2. 77 FR 66649 - Proposed Revision to Probabilistic Risk Assessment and Severe Accident Evaluation for New Reactors

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-06

    ... in the NRC Library at http://www.nrc.gov/reading-rm/adams.html . To begin the search, select ``ADAMS... of digital instrumentation and control system PRAs, including common cause failures in PRAs and uncertainty analysis associated with new reactor digital systems, and (4) incorporation of additional...

  3. Cause-and-effect analysis of risk management files to assess patient care in the emergency department.

    PubMed

    White, Andrew A; Wright, Seth W; Blanco, Roberto; Lemonds, Brent; Sisco, Janice; Bledsoe, Sandy; Irwin, Cindy; Isenhour, Jennifer; Pichert, James W

    2004-10-01

    Identifying the etiologies of adverse outcomes is an important first step in improving patient safety and reducing malpractice risks. However, relatively little is known about the causes of emergency department-related adverse outcomes. The objective was to describe a method for identification of common causes of adverse outcomes in an emergency department. This methodology potentially can suggest ways to improve care and might provide a model for identification of factors associated with adverse outcomes. This was a retrospective analysis of 74 consecutive files opened by a malpractice insurer between 1995 and 2000. Each risk-management file was analyzed to identify potential causes of adverse outcomes. The main outcomes were rater-assigned codes for alleged problems with care (e.g., failures of communication or problems related to diagnosis). About 50% of cases were related to injuries or abdominal complaints. A contributing cause was found in 92% of cases, and most had more than one contributing cause. The most frequent contributing categories included failure to diagnose (45%), supervision problems (31%), communication problems (30%), patient behavior (24%), administrative problems (20%), and documentation (20%). Specific relating factors within these categories, such as lack of timely resident supervision and failure to follow policies and procedures, were identified. This project documented that an aggregate analysis of risk-management files has the potential to identify shared causes related to real or perceived adverse outcomes. Several potentially correctable systems problems were identified using this methodology. These simple, descriptive management tools may be useful in identifying issues for problem solving and can be easily learned by physicians and managers.

  4. Heart Failure

    MedlinePlus

    Heart failure is a condition in which the heart can't pump enough blood to meet the body's needs. Heart failure does not mean that your heart has stopped ... and shortness of breath Common causes of heart failure are coronary artery disease, high blood pressure and ...

  5. Using pattern analysis methods to do fast detection of manufacturing pattern failures

    NASA Astrophysics Data System (ADS)

    Zhao, Evan; Wang, Jessie; Sun, Mason; Wang, Jeff; Zhang, Yifan; Sweis, Jason; Lai, Ya-Chieh; Ding, Hua

    2016-03-01

    At the advanced technology node, logic design has become extremely complex and is getting more challenging as the pattern geometry size decreases. The small sizes of layout patterns are becoming very sensitive to process variations. Meanwhile, the high pressure of yield ramp is always there due to time-to-market competition. The company that achieves patterning maturity earlier than others will have a great advantage and a better chance to realize maximum profit margins. For debugging silicon failures, DFT diagnostics can identify which nets or cells caused the yield loss. But normally, a long time period is needed with many resources to identify which failures are due to one common layout pattern or structure. This paper will present a new yield diagnostic flow, based on preliminary EFA results, to show how pattern analysis can more efficiently detect pattern related systematic defects. Increased visibility on design pattern related failures also allows more precise yield loss estimation.

  6. Software For Fault-Tree Diagnosis Of A System

    NASA Technical Reports Server (NTRS)

    Iverson, Dave; Patterson-Hine, Ann; Liao, Jack

    1993-01-01

    Fault Tree Diagnosis System (FTDS) computer program is automated-diagnostic-system program identifying likely causes of specified failure on basis of information represented in system-reliability mathematical models known as fault trees. Is modified implementation of failure-cause-identification phase of Narayanan's and Viswanadham's methodology for acquisition of knowledge and reasoning in analyzing failures of systems. Knowledge base of if/then rules replaced with object-oriented fault-tree representation. Enhancement yields more-efficient identification of causes of failures and enables dynamic updating of knowledge base. Written in C language, C++, and Common LISP.

  7. Identification of Modeling Approaches To Support Common-Cause Failure Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Korsah, Kofi; Wood, Richard Thomas

    2015-06-01

    Experience with applying current guidance and practices for common-cause failure (CCF) mitigation to digital instrumentation and control (I&C) systems has proven problematic, and the regulatory environment has been unpredictable. The impact of CCF vulnerability is to inhibit I&C modernization and, thereby, challenge the long-term sustainability of existing plants. For new plants and advanced reactor concepts, the issue of CCF vulnerability for highly integrated digital I&C systems imposes a design burden resulting in higher costs and increased complexity. The regulatory uncertainty regarding which mitigation strategies are acceptable (e.g., what diversity is needed and how much is sufficient) drives designers to adoptmore » complicated, costly solutions devised for existing plants. The conditions that constrain the transition to digital I&C technology by the U.S. nuclear industry require crosscutting research to resolve uncertainty, demonstrate necessary characteristics, and establish an objective basis for qualification of digital technology for usage in Nuclear Power Plant (NPP) I&C applications. To fulfill this research need, Oak Ridge National Laboratory is conducting an investigation into mitigation of CCF vulnerability for nuclear-qualified applications. The outcome of this research is expected to contribute to a fundamentally sound, comprehensive technical basis for establishing the qualification of digital technology for nuclear power applications. This report documents the investigation of modeling approaches for representing failure of I&C systems. Failure models are used when there is a need to analyze how the probability of success (or failure) of a system depends on the success (or failure) of individual elements. If these failure models are extensible to represent CCF, then they can be employed to support analysis of CCF vulnerabilities and mitigation strategies. Specifically, the research findings documented in this report identify modeling approaches that can be adapted to contribute to the basis for developing systematic methods, quantifiable measures, and objective criteria for evaluating CCF vulnerabilities and mitigation strategies.« less

  8. Use of FMEA analysis to reduce risk of errors in prescribing and administering drugs in paediatric wards: a quality improvement report

    PubMed Central

    Lago, Paola; Bizzarri, Giancarlo; Scalzotto, Francesca; Parpaiola, Antonella; Amigoni, Angela; Putoto, Giovanni; Perilongo, Giorgio

    2012-01-01

    Objective Administering medication to hospitalised infants and children is a complex process at high risk of error. Failure mode and effect analysis (FMEA) is a proactive tool used to analyse risks, identify failures before they happen and prioritise remedial measures. To examine the hazards associated with the process of drug delivery to children, we performed a proactive risk-assessment analysis. Design and setting Five multidisciplinary teams, representing different divisions of the paediatric department at Padua University Hospital, were trained to analyse the drug-delivery process, to identify possible causes of failures and their potential effects, to calculate a risk priority number (RPN) for each failure and plan changes in practices. Primary outcome To identify higher-priority potential failure modes as defined by RPNs and planning changes in clinical practice to reduce the risk of patients harm and improve safety in the process of medication use in children. Results In all, 37 higher-priority potential failure modes and 71 associated causes and effects were identified. The highest RPNs related (>48) mainly to errors in calculating drug doses and concentrations. Many of these failure modes were found in all the five units, suggesting the presence of common targets for improvement, particularly in enhancing the safety of prescription and preparation of endovenous drugs. The introductions of new activities in the revised process of administering drugs allowed reducing the high-risk failure modes of 60%. Conclusions FMEA is an effective proactive risk-assessment tool useful to aid multidisciplinary groups in understanding a process care and identifying errors that may occur, prioritising remedial interventions and possibly enhancing the safety of drug delivery in children. PMID:23253870

  9. Use of FMEA analysis to reduce risk of errors in prescribing and administering drugs in paediatric wards: a quality improvement report.

    PubMed

    Lago, Paola; Bizzarri, Giancarlo; Scalzotto, Francesca; Parpaiola, Antonella; Amigoni, Angela; Putoto, Giovanni; Perilongo, Giorgio

    2012-01-01

    Administering medication to hospitalised infants and children is a complex process at high risk of error. Failure mode and effect analysis (FMEA) is a proactive tool used to analyse risks, identify failures before they happen and prioritise remedial measures. To examine the hazards associated with the process of drug delivery to children, we performed a proactive risk-assessment analysis. Five multidisciplinary teams, representing different divisions of the paediatric department at Padua University Hospital, were trained to analyse the drug-delivery process, to identify possible causes of failures and their potential effects, to calculate a risk priority number (RPN) for each failure and plan changes in practices. To identify higher-priority potential failure modes as defined by RPNs and planning changes in clinical practice to reduce the risk of patients harm and improve safety in the process of medication use in children. In all, 37 higher-priority potential failure modes and 71 associated causes and effects were identified. The highest RPNs related (>48) mainly to errors in calculating drug doses and concentrations. Many of these failure modes were found in all the five units, suggesting the presence of common targets for improvement, particularly in enhancing the safety of prescription and preparation of endovenous drugs. The introductions of new activities in the revised process of administering drugs allowed reducing the high-risk failure modes of 60%. FMEA is an effective proactive risk-assessment tool useful to aid multidisciplinary groups in understanding a process care and identifying errors that may occur, prioritising remedial interventions and possibly enhancing the safety of drug delivery in children.

  10. Full-length genome characterization and genetic relatedness analysis of hepatitis A virus outbreak strains associated with acute liver failure among children.

    PubMed

    Vaughan, Gilberto; Forbi, Joseph C; Xia, Guo-Liang; Fonseca-Ford, Maureen; Vazquez, Roberto; Khudyakov, Yury E; Montiel, Sonia; Waterman, Steve; Alpuche, Celia; Gonçalves Rossi, Livia Maria; Luna, Norma

    2014-02-01

    Clinical infection by hepatitis A virus (HAV) is generally self-limited but in some cases can progress to liver failure. Here, an HAV outbreak investigation among children with acute liver failure in a highly endemic country is presented. In addition, a sensitive method for HAV whole genome amplification and sequencing suitable for analysis of clinical samples is described. In this setting, two fatal cases attributed to acute liver failure and two asymptomatic cases living in the same household were identified. In a second household, one HAV case was observed with jaundice which resolved spontaneously. Partial molecular characterization showed that both households were infected by HAV subtype IA; however, the infecting strains in the two households were different. The HAV outbreak strains recovered from all cases grouped together within cluster IA1, which contains closely related HAV strains from the United States commonly associated with international travelers. Full-genome HAV sequences obtained from the household with the acute liver failure cases were related (genetic distances ranging from 0.01% to 0.04%), indicating a common-source infection. Interestingly, the strain recovered from the asymptomatic household contact was nearly identical to the strain causing acute liver failure. The whole genome sequence from the case in the second household was distinctly different from the strains associated with acute liver failure. Thus, infection with almost identical HAV strains resulted in drastically different clinical outcomes. © 2013 Wiley Periodicals, Inc.

  11. Etiologies and predictors of 30-day readmissions in patients undergoing percutaneous mechanical circulatory support-assisted percutaneous coronary intervention in the United States: Insights from the Nationwide Readmissions Database.

    PubMed

    Bavishi, Chirag; Lemor, Alejandro; Trivedi, Vrinda; Chatterjee, Saurav; Moreno, Pedro; Lasala, John; Aronow, Herbert D; Dawn Abbott, J

    2018-04-01

    Patients undergoing percutaneous mechanical circulatory support (pMCS)-assisted percutaneous coronary intervention (PCI) represent a high-risk group vulnerable to complications and readmissions. Thirty-day readmissions after pMCS-assisted PCI are common among patients with comorbidities and account for a significant amount of healthcare spending. Patients undergoing PCI and pMCS (Impella, TandemHeart, or intra-aortic balloon pump) for any indication between January 1, 2012, and November 30, 2014, were selected from the Nationwide Readmissions Database. Patients were identified using appropriate ICD-9-CM codes. Clinical risk factors and complications were analyzed for association with 30-day readmission. Our analysis included 29 247 patients, of which 4535 (15.5%) were readmitted within 30 days. On multivariate analysis, age ≥ 65 years, female sex, hypertension, diabetes, chronic lung disease, heart failure, prior implantable cardioverter-defibrillator, liver disease, end-stage renal disease, and length of stay ≥5 days during index hospitalization were independent predictors of 30-day readmission. Cardiac etiologies accounted for ~60% of readmissions, of which systolic or diastolic heart failure (22%), stable coronary artery disease (11.1%), acute coronary syndromes (8.9%), and nonspecific chest pain (4.0%) were the most common causes. In noncardiac causes, sepsis/septic shock (4.6%), hypotension/syncope (3.2%), gastrointestinal bleed (3.1%), and acute kidney injury (2.6%) were among the most common causes of 30-day readmissions. Mean length of stay and cost of readmissions was 4 days and $16 191, respectively. Thirty-day readmissions after pMCS-assisted PCI are common and are predominantly associated with increased burden of comorbidities. Reducing readmissions for common cardiac etiologies could save substantial healthcare costs. © 2018 Wiley Periodicals, Inc.

  12. Graphical Displays Assist In Analysis Of Failures

    NASA Technical Reports Server (NTRS)

    Pack, Ginger; Wadsworth, David; Razavipour, Reza

    1995-01-01

    Failure Environment Analysis Tool (FEAT) computer program enables people to see and better understand effects of failures in system. Uses digraph models to determine what will happen to system if set of failure events occurs and to identify possible causes of selected set of failures. Digraphs or engineering schematics used. Also used in operations to help identify causes of failures after they occur. Written in C language.

  13. Analysis of Emergency Diesel Generators Failure Incidents in Nuclear Power Plants

    NASA Astrophysics Data System (ADS)

    Hunt, Ronderio LaDavis

    In early years of operation, emergency diesel generators have had a minimal rate of demand failures. Emergency diesel generators are designed to operate as a backup when the main source of electricity has been disrupted. As of late, EDGs (emergency diesel generators) have been failing at NPPs (nuclear power plants) around the United States causing either station blackouts or loss of onsite and offsite power. These failures occurred from a specific type called demand failures. This thesis evaluated the current problem that raised concern in the nuclear industry which was averaging 1 EDG demand failure/year in 1997 to having an excessive event of 4 EDG demand failure year which occurred in 2011. To determine the next occurrence of the extreme event and possible cause to an event of such happening, two analyses were conducted, the statistical and root cause analysis. Considering the statistical analysis in which an extreme event probability approach was applied to determine the next occurrence year of an excessive event as well as, the probability of that excessive event occurring. Using the root cause analysis in which the potential causes of the excessive event occurred by evaluating, the EDG manufacturers, aging, policy changes/ maintenance practices and failure components. The root cause analysis investigated the correlation between demand failure data and historical data. Final results from the statistical analysis showed expectations of an excessive event occurring in a fixed range of probability and a wider range of probability from the extreme event probability approach. The root-cause analysis of the demand failure data followed historical statistics for the EDG manufacturer, aging and policy changes/ maintenance practices but, indicated a possible cause regarding the excessive event with the failure components. Conclusions showed the next excessive demand failure year, prediction of the probability and the next occurrence year of such failures, with an acceptable confidence level, was difficult but, it was likely that this type of failure will not be a 100 year event. It was noticeable to see that the majority of the EDG demand failures occurred within the main components as of 2005. The overall analysis of this study provided from percentages, indicated that it would be appropriate to make the statement that the excessive event was caused by the overall age (wear and tear) of the Emergency Diesel Generators in Nuclear Power Plants. Future Work will be to better determine the return period of the excessive event once the occurrence has happened for a second time by implementing the extreme event probability approach.

  14. Underlying Cause(s) of Letter Perseveration Errors

    ERIC Educational Resources Information Center

    Fischer-Baum, Simon; Rapp, Brenda

    2012-01-01

    Perseverations, the inappropriate intrusion of elements from a previous response into a current response, are commonly observed in individuals with acquired deficits. This study specifically investigates the contribution of failure-to activate and failure-to-inhibit deficit(s) in the generation of letter perseveration errors in acquired…

  15. Learning from an Unsuccessful Study Idea: Reflection and Application of Innovative Techniques to Prevent Future Failures.

    PubMed

    Fujihara, Yuki; Saito, Taichi; Huetteman, Helen E; Sterbenz, Jennifer M; Chung, Kevin C

    2018-04-01

    A well-organized, thoughtful study design is essential for creating an impactful study. However, pressures promoting high output from researchers can lead to rushed study proposals that overlook critical weaknesses in the study design that can affect the validity of the conclusions. Researchers can benefit from thorough review of past failed proposals when crafting new research ideas. Conceptual frameworks and root cause analysis are two innovative techniques that can be used during study development to identify flaws and prevent study failures. In addition, conceptual frameworks and root cause analysis can be combined to complement each other to provide both a big picture and detailed view of a study proposal. This article describes these two common analytical methods and provides an example of how they can be used to evaluate and improve a study design by critically examining a previous failed research idea.

  16. High-Temperature Graphitization Failure of Primary Superheater Tube

    NASA Astrophysics Data System (ADS)

    Ghosh, D.; Ray, S.; Roy, H.; Mandal, N.; Shukla, A. K.

    2015-12-01

    Failure of boiler tubes is the main cause of unit outages of the plant, which further affects the reliability, availability and safety of the unit. So failure analysis of boiler tubes is absolutely essential to predict the root cause of the failure and the steps are taken for future remedial action to prevent the failure in near future. This paper investigates the probable cause/causes of failure of the primary superheater tube in a thermal power plant boiler. Visual inspection, dimensional measurement, chemical analysis, metallographic examination and hardness measurement are conducted as the part of the investigative studies. Apart from these tests, mechanical testing and fractographic analysis are also conducted as supplements. Finally, it is concluded that the superheater tube is failed due to graphitization for prolonged exposure of the tube at higher temperature.

  17. Anger, hostility, and hospitalizations in patients with heart failure.

    PubMed

    Keith, Felicia; Krantz, David S; Chen, Rusan; Harris, Kristie M; Ware, Catherine M; Lee, Amy K; Bellini, Paula G; Gottlieb, Stephen S

    2017-09-01

    Heart failure patients have a high hospitalization rate, and anger and hostility are associated with coronary heart disease morbidity and mortality. Using structural equation modeling, this prospective study assessed the predictive validity of anger and hostility traits for cardiovascular and all-cause rehospitalizations in patients with heart failure. 146 heart failure patients were administered the STAXI and Cook-Medley Hostility Inventory to measure anger, hostility, and their component traits. Hospitalizations were recorded for up to 3 years following baseline. Causes of hospitalizations were categorized as heart failure, total cardiac, noncardiac, and all-cause (sum of cardiac and noncardiac). Measurement models were separately fit for Anger and Hostility, followed by a Confirmatory Factor Analysis to estimate the relationship between the Anger and Hostility constructs. An Anger model consisted of State Anger, Trait Anger, Anger Expression Out, and Anger Expression In, and a Hostility model included Cynicism, Hostile Affect, Aggressive Responding, and Hostile Attribution. The latent construct of Anger did not predict any of the hospitalization outcomes, but Hostility significantly predicted all-cause hospitalizations. Analyses of individual trait components of each of the 2 models indicated that Anger Expression Out predicted all-cause and noncardiac hospitalizations, and Trait Anger predicted noncardiac hospitalizations. None of the individual components of Hostility were related to rehospitalizations or death. The construct of Hostility and several components of Anger are predictive of hospitalizations that were not specific to cardiac causes. Mechanisms common to a variety of health problems, such as self-care and risky health behaviors, may be involved in these associations. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  18. 42 CFR 417.810 - Final settlement.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... common ownership or control; (ii) The HCPP's methods of apportioning costs among its Medicare enrollees... extension of time to submit a cost report for good cause shown. (4) Failure to report required financial... good cause shown, CMS may— (i) Regard the failure to report this information as evidence of likely...

  19. [Clinical characteristics and medium-term prognosis of patients with heart failure and preserved systolic function. Do they differ in systolic dysfunction?].

    PubMed

    Ojeda, Soledad; Anguita, Manuel; Muñoz, Juan F; Rodríguez, Marcos T; Mesa, Dolores; Franco, Manuel; Ureña, Isabel; Vallés, Federico

    2003-11-01

    To assess the prevalence, clinical profile and medium-term prognosis in patients with heart failure and preserved systolic ventricular function compared to those with systolic dysfunction. 153 patients were included, 62 with preserved systolic ventricular function (left ventricular ejection fraction > or = 45%) and 91 with impaired systolic ventricular function (left ventricular ejection fraction < 45%). The mean follow-up period was 25 10 months. Mean age was similar (66 10 vs. 65 10; p = 0.54). There was a higher proportion of women among patients with preserved systolic function (53% vs. 28%; p < 0.01). Ischemic and idiopathic cardiomyopathy were the most common causes of heart failure in patients with systolic dysfunction, whereas valvular disease and hypertensive cardiopathy were the most common in patients with preserved systolic function. Angiotensin-converting enzyme inhibitors and beta-blockers were more often prescribed in patients with impaired systolic ventricular function (86% vs. 52%; p < 0.01 and 33% vs. 11%; p < 0.01, respectively). There were no differences between the groups in terms of mortality rate (37% vs. 29%), readmission rate for other causes (29% vs. 23%), readmission rate for heart failure (45% vs. 45%), cumulative survival (51% vs. 62%) and the likelihood of not being readmitted for heart failure (50% vs. 52%). In the multivariate analysis, left ventricular ejection fraction was not a predictor of death or readmission because of heart failure. In a large proportion of patients with heart failure, systolic ventricular function is preserved. Despite the clinical differences between patients with preserved and impaired systolic ventricular function, the medium-term prognosis was similar in both groups.

  20. Mitigation of Manhole Events Caused by Secondary Cable Failure

    NASA Astrophysics Data System (ADS)

    Zhang, Lili

    "Manhole event" refers to a range of phenomena, such as smokers, fires and explosions which occur on underground electrical infrastructure, primarily in major cities. The most common cause of manhole events is decomposition of secondary cable initiated by an electric fault. The work presented in this thesis addresses various aspects related to the evolution and mitigation of the manhole events caused by secondary cable insulation failure. Manhole events develop as a result of thermal decomposition of organic materials present in the cable duct and manholes. Polymer characterization techniques are applied to intensively study the materials properties as related to manhole events, mainly the thermal decomposition behaviors of the polymers present in the cable duct. Though evolved gas analysis, the combustible gases have been quantitatively identified. Based on analysis and knowledge of field conditions, manhole events is divided into at least two classes, those in which exothermic chemical reactions dominate and those in which electrical energy dominates. The more common form of manhole event is driven by air flow down the duct. Numerical modeling of smolder propagation in the cable duct demonstrated that limiting air flow is effective in reducing the generation rate of combustible gas, in other words, limiting manhole events to relatively minor "smokers". Besides manhole events, another by-product of secondary cable insulation breakdown is stray voltage. The danger to personnel due to stray voltage is mostly caused by the 'step potential'. The amplitude of step potential as a result of various types of insulation defects is calculated using Finite Element Analysis (FEA) program.

  1. The Spectrum of Renal Allograft Failure

    PubMed Central

    Chand, Sourabh; Atkinson, David; Collins, Clare; Briggs, David; Ball, Simon; Sharif, Adnan; Skordilis, Kassiani; Vydianath, Bindu; Neil, Desley; Borrows, Richard

    2016-01-01

    Background Causes of “true” late kidney allograft failure remain unclear as study selection bias and limited follow-up risk incomplete representation of the spectrum. Methods We evaluated all unselected graft failures from 2008–2014 (n = 171; 0–36 years post-transplantation) by contemporary classification of indication biopsies “proximate” to failure, DSA assessment, clinical and biochemical data. Results The spectrum of graft failure changed markedly depending on the timing of allograft failure. Failures within the first year were most commonly attributed to technical failure, acute rejection (with T-cell mediated rejection [TCMR] dominating antibody-mediated rejection [ABMR]). Failures beyond a year were increasingly dominated by ABMR and ‘interstitial fibrosis with tubular atrophy’ without rejection, infection or recurrent disease (“IFTA”). Cases of IFTA associated with inflammation in non-scarred areas (compared with no inflammation or inflammation solely within scarred regions) were more commonly associated with episodes of prior rejection, late rejection and nonadherence, pointing to an alloimmune aetiology. Nonadherence and late rejection were common in ABMR and TCMR, particularly Acute Active ABMR. Acute Active ABMR and nonadherence were associated with younger age, faster functional decline, and less hyalinosis on biopsy. Chronic and Chronic Active ABMR were more commonly associated with Class II DSA. C1q-binding DSA, detected in 33% of ABMR episodes, were associated with shorter time to graft failure. Most non-biopsied patients were DSA-negative (16/21; 76.1%). Finally, twelve losses to recurrent disease were seen (16%). Conclusion This data from an unselected population identifies IFTA alongside ABMR as a very important cause of true late graft failure, with nonadherence-associated TCMR as a phenomenon in some patients. It highlights clinical and immunological characteristics of ABMR subgroups, and should inform clinical practice and individualised patient care. PMID:27649571

  2. Maternal and neonatal outcomes of respiratory failure during pregnancy.

    PubMed

    Hung, Chen-Yiu; Hu, Han-Chung; Chiu, Li-Chung; Chang, Chih-Hao; Li, Li-Fu; Huang, Chung-Chi; Kao, Chuan-Chi; Cheng, Po-Jen; Kao, Kuo-Chin

    2018-05-01

    Obstetric patients comprise a limited portion of intensive care unit patients, but they often present with unfamiliar conditions and exhibit the potential for catastrophic deterioration. This study evaluated the maternal and neonatal outcomes of respiratory failure during pregnancy. Information on 71 patients at >25 weeks gestation in the ICU with respiratory failure was recorded between 2009 and 2013. The characteristics and outcomes of mothers and fetuses were determined through a retrospective chart review and evaluated using Student's t test, chi-square test, and Fisher's exact test. The leading causes of respiratory failure were postpartum hemorrhage and severe preeclampsia in the obstetric causes group and pneumonia in the nonobstetric causes group during pregnancy and the peripartum period. The non-obstetric causes group exhibited a higher incidence of acute respiratory distress syndrome and renal replacement therapy as well as requiring more ventilator days. The patients in the obstetric causes group showed significant improvement after delivery in the partial pressure of arterial oxygen to the fraction of inspired oxygen and peak inspiratory pressure decrease. Both groups exhibited high incidences of neonatal respiratory distress syndrome. Neonatal complications resulting from meconium aspiration syndrome (MAS) and sepsis were more common in the non-obstetric causes group; however, neurological development impairment was more common in the obstetric causes group. Obstetric cause was associated with longer ventilator free days and fewer episodes of ARDS after delivery. Neonatal complications resulting from different etiologies of respiratory failure were found to differ. Copyright © 2017. Published by Elsevier B.V.

  3. Experience in cochlear reimplantation. Descriptive study of a 20-year period.

    PubMed

    Gutiérrez-Salazar, Andrés; Cop, Constanze; Osorio-Acosta, Ángel; Borkoski-Barreiro, Silvia; Falcón-González, Juan C; Ramos-Macías, Ángel

    2015-01-01

    The cochlear implant is a surgical procedure that has increased substantially, because the paediatric population is diagnosed and implanted early and because there are increased potential indications. This device has the inherent risk of failure in performance, as dies any active medical device, which is the most common cause of implant removal. Our goal was to understand what the causes that produced removal in our series were, and confirm if these conformed to reality as reviewed in the literature. This was a retrospective, descriptive, observational study of 859 cochlear implant surgeries carried out between October 1991 and May 2011. The causes of implant removal were classified according to the European Consensus Statement on Cochlear Implant Failures and Explantations. The reimplantation rate was 6.16% (n=51). The most common reason for removal was technical device failure (45.5%), followed by infection/rejection (23.6%) and upgrade (12.7%). Less common causes: there were 3 cases (5.6%) of electrode misplacement, 2 cases (3.6%) of labyrinthine ossification, 2 (3.6%) as a result of head trauma, 2 (3.6%) from need for nuclear magnetic resonance imaging and 1 case (1.8%) from psychiatric illness. Cochlear reimplantation is a safe procedure, with a low complication rate. In our centre, it reaches an overall rate of 6.16%. Technical device failure remains the most common cause of this procedure, although there is a significant percentage of reimplantation for device update. Copyright © 2014 Elsevier España, S.L.U. and Sociedad Española de Otorrinolaringología y Patología Cérvico-Facial. All rights reserved.

  4. A systematic review of the extent, nature and likely causes of preventable adverse events arising from hospital care.

    PubMed

    Sari, A Akbari; Doshmangir, L; Sheldon, T

    2010-01-01

    Understanding the nature and causes of medical adverse events may help their prevention. This systematic review explores the types, risk factors, and likely causes of preventable adverse events in the hospital sector. MEDLINE (1970-2008), EMBASE, CINAHL (1970-2005) and the reference lists were used to identify the studies and a structured narrative method used to synthesise the data. Operative adverse events were more common but less preventable and diagnostic adverse events less common but more preventable than other adverse events. Preventable adverse events were often associated with more than one contributory factor. The majority of adverse events were linked to individual human error, and a significant proportion of these caused serious patient harm. Equipment failure was involved in a small proportion of adverse events and rarely caused patient harm. The proportion of system failures varied widely ranging from 3% to 85% depending on the data collection and classification methods used. Operative adverse events are more common but less preventable than diagnostic adverse events. Adverse events are usually associated with more than one contributory factor, the majority are linked to individual human error, and a proportion of these with system failure.

  5. Parts, Materials, and Processes Experience Summary. Volume 1; [Catalog of ALERT and Other Information on Basic Design, Reliability, Quality and Applications Programs

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The ALERT program, a system for communicating common problems with parts, materials, and processes, is condensed and catalogued. Expanded information on selected topics is provided by relating the problem area (failure) to the cause, the investigations and findings, the suggestions for avoidance (inspections, screening tests, proper part applications), and failure analysis procedures. The basic objective of ALERT is the avoidance of the recurrence of parts, materials, and processed problems, thus improving the reliability of equipment produced for and used by the government.

  6. Time-frequency vibration analysis for the detection of motor damages caused by bearing currents

    NASA Astrophysics Data System (ADS)

    Prudhom, Aurelien; Antonino-Daviu, Jose; Razik, Hubert; Climente-Alarcon, Vicente

    2017-02-01

    Motor failure due to bearing currents is an issue that has drawn an increasing industrial interest over recent years. Bearing currents usually appear in motors operated by variable frequency drives (VFD); these drives may lead to common voltage modes which cause currents induced in the motor shaft that are discharged through the bearings. The presence of these currents may lead to the motor bearing failure only few months after system startup. Vibration monitoring is one of the most common ways for detecting bearing damages caused by circulating currents; the evaluation of the amplitudes of well-known characteristic components in the vibration Fourier spectrum that are associated with race, ball or cage defects enables to evaluate the bearing condition and, hence, to identify an eventual damage due to bearing currents. However, the inherent constraints of the Fourier transform may complicate the detection of the progressive bearing degradation; for instance, in some cases, other frequency components may mask or be confused with bearing defect-related while, in other cases, the analysis may not be suitable due to the eventual non-stationary nature of the captured vibration signals. Moreover, the fact that this analysis implies to lose the time-dimension limits the amount of information obtained from this technique. This work proposes the use of time-frequency (T-F) transforms to analyse vibration data in motors affected by bearing currents. The experimental results obtained in real machines show that the vibration analysis via T-F tools may provide significant advantages for the detection of bearing current damages; among other, these techniques enable to visualise the progressive degradation of the bearing while providing an effective discrimination versus other components that are not related with the fault. Moreover, their application is valid regardless of the operation regime of the machine. Both factors confirm the robustness and reliability of these tools that may be an interesting alternative for detecting this type of failure in induction motors.

  7. Common Variable Immunodeficiency Caused by FANC Mutations.

    PubMed

    Sekinaka, Yujin; Mitsuiki, Noriko; Imai, Kohsuke; Yabe, Miharu; Yabe, Hiromasa; Mitsui-Sekinaka, Kanako; Honma, Kenichi; Takagi, Masatoshi; Arai, Ayako; Yoshida, Kenichi; Okuno, Yusuke; Shiraishi, Yuichi; Chiba, Kenichi; Tanaka, Hiroko; Miyano, Satoru; Muramatsu, Hideki; Kojima, Seiji; Hira, Asuka; Takata, Minoru; Ohara, Osamu; Ogawa, Seishi; Morio, Tomohiro; Nonoyama, Shigeaki

    2017-07-01

    Common variable immunodeficiency (CVID) is the most common adult-onset primary antibody deficiency disease due to various causative genes. Several genes, which are known to be the cause of different diseases, have recently been reported as the cause of CVID in patients by performing whole exome sequencing (WES) analysis. Here, we found FANC gene mutations as a cause of adult-onset CVID in two patients. B cells were absent and CD4 + T cells were skewed toward CD45RO + memory T cells. T-cell receptor excision circles (TRECs) and signal joint kappa-deleting recombination excision circles (sjKRECs) were undetectable in both patients. Both patients had no anemia, neutropenia, or thrombocytopenia. Using WES, we identified compound heterozygous mutations of FANCE in one patient and homozygous mutation of FANCA in another patient. The impaired function of FANC protein complex was confirmed by a monoubiquitination assay and by chromosome fragility test. We then performed several immunological evaluations including quantitative lymphocyte analysis and TRECs/sjKRECs analysis for 32 individuals with Fanconi anemia (FA). In total, 22 FA patients (68.8%) were found to have immunological abnormalities, suggesting that such immunological findings may be common in FA patients. These data indicate that FANC mutations are involved in impaired lymphogenesis probably by the accumulation of DNA replication stress, leading to CVID. It is important to diagnose FA because it drastically changes clinical management. We propose that FANC mutations can cause isolated immunodeficiency in addition to bone marrow failure and malignancy.

  8. [Renal failure in patients with liver transplant: incidence and predisposing factors].

    PubMed

    Gerona, S; Laudano, O; Macías, S; San Román, E; Galdame, O; Torres, O; Sorkin, E; Ciardullo, M; de Santibañes, E; Mastai, R

    1997-01-01

    Renal failure is a common finding in patients undergoing orthotopic liver transplantation. The aim of the present study was to evaluate the incidence, prognostic value of pre, intra and postoperative factors and severity of renal dysfunction in patients who undergo liver transplantation. Therefore, the records of 38 consecutive adult patients were reviewed. Renal failure was defined arbitrarily as an increase in creatinine (> 1.5 mg/dl) and/or blood urea (> 80 mg/dl). Three patients were excluded of the final analysis (1 acute liver failure and 2 with a survival lower than 72 hs.) Twenty one of the 35 patients has renal failure after orthotopic liver transplantation. Six of these episodes developed early, having occurred within the first 6 days. Late renal impairment occurred in 15 patients within the hospitalization (40 +/- 10 days) (Mean +/- SD). In he overall series, liver function, evaluated by Child-Pugh classification, a higher blood-related requirements and cyclosporine levels were observed more in those who experienced renal failure than those who did not (p < 0.05). Early renal failure was related with preoperative (liver function) and intraoperative (blood requirements) factors and several causes (nephrotoxic drugs and graft failure) other than cyclosporine were present in patients who developed late renal impairment. No mortality. No mortality was associated with renal failure. We conclude that renal failure a) is a common finding after liver transplantation, b) the pathogenesis of this complication is multifactorial and, c) in not related with a poor outcome.

  9. An observational study of the frequency, severity, and etiology of failures in postoperative care after major elective general surgery.

    PubMed

    Symons, Nicholas R A; Almoudaris, Alex M; Nagpal, Kamal; Vincent, Charles A; Moorthy, Krishna

    2013-01-01

    To investigate the nature of process failures in postoperative care, to assess their frequency and preventability, and to explore their relationship to adverse events. Adverse events are common and are frequently caused by failures in the process of care. These processes are often evaluated independently using clinical audit. There is little understanding of process failures in terms of their overall frequency, relative risk, and cumulative effect on the surgical patient. Patients were observed daily from the first postoperative day until discharge by an independent surgeon. Field notes on the circumstances surrounding any nonroutine or atypical event were recorded. Field notes were assessed by 2 surgeons to identify failures in the process of care. Preventability, the degree of harm caused to the patient, and the underlying etiology of process failures were evaluated by 2 independent surgeons. Fifty patients undergoing major elective general surgery were observed for a total of 659 days of postoperative care. A total of 256 process failures were identified, of which 85% were preventable and 51% directly led to patient harm. Process failures occurred in all aspects of care, the most frequent being medication prescribing and administration, management of lines, tubes, and drains, and pain control interventions. Process failures accounted for 57% of all preventable adverse events. Communication failures and delays were the main etiologies, leading to 54% of process failures. Process failures are common in postoperative care, are highly preventable, and frequently cause harm to patients. Interventions to prevent process failures will improve the reliability of surgical postoperative care and have the potential to reduce hospital stay.

  10. Automatically Detecting Failures in Natural Language Processing Tools for Online Community Text.

    PubMed

    Park, Albert; Hartzler, Andrea L; Huh, Jina; McDonald, David W; Pratt, Wanda

    2015-08-31

    The prevalence and value of patient-generated health text are increasing, but processing such text remains problematic. Although existing biomedical natural language processing (NLP) tools are appealing, most were developed to process clinician- or researcher-generated text, such as clinical notes or journal articles. In addition to being constructed for different types of text, other challenges of using existing NLP include constantly changing technologies, source vocabularies, and characteristics of text. These continuously evolving challenges warrant the need for applying low-cost systematic assessment. However, the primarily accepted evaluation method in NLP, manual annotation, requires tremendous effort and time. The primary objective of this study is to explore an alternative approach-using low-cost, automated methods to detect failures (eg, incorrect boundaries, missed terms, mismapped concepts) when processing patient-generated text with existing biomedical NLP tools. We first characterize common failures that NLP tools can make in processing online community text. We then demonstrate the feasibility of our automated approach in detecting these common failures using one of the most popular biomedical NLP tools, MetaMap. Using 9657 posts from an online cancer community, we explored our automated failure detection approach in two steps: (1) to characterize the failure types, we first manually reviewed MetaMap's commonly occurring failures, grouped the inaccurate mappings into failure types, and then identified causes of the failures through iterative rounds of manual review using open coding, and (2) to automatically detect these failure types, we then explored combinations of existing NLP techniques and dictionary-based matching for each failure cause. Finally, we manually evaluated the automatically detected failures. From our manual review, we characterized three types of failure: (1) boundary failures, (2) missed term failures, and (3) word ambiguity failures. Within these three failure types, we discovered 12 causes of inaccurate mappings of concepts. We used automated methods to detect almost half of 383,572 MetaMap's mappings as problematic. Word sense ambiguity failure was the most widely occurring, comprising 82.22% of failures. Boundary failure was the second most frequent, amounting to 15.90% of failures, while missed term failures were the least common, making up 1.88% of failures. The automated failure detection achieved precision, recall, accuracy, and F1 score of 83.00%, 92.57%, 88.17%, and 87.52%, respectively. We illustrate the challenges of processing patient-generated online health community text and characterize failures of NLP tools on this patient-generated health text, demonstrating the feasibility of our low-cost approach to automatically detect those failures. Our approach shows the potential for scalable and effective solutions to automatically assess the constantly evolving NLP tools and source vocabularies to process patient-generated text.

  11. Failure analysis of aluminum alloy components

    NASA Technical Reports Server (NTRS)

    Johari, O.; Corvin, I.; Staschke, J.

    1973-01-01

    Analysis of six service failures in aluminum alloy components which failed in aerospace applications is reported. Identification of fracture surface features from fatigue and overload modes was straightforward, though the specimens were not always in a clean, smear-free condition most suitable for failure analysis. The presence of corrosion products and of chemically attacked or mechanically rubbed areas here hindered precise determination of the cause of crack initiation, which was then indirectly inferred from the scanning electron fractography results. In five failures the crack propagation was by fatigue, though in each case the fatigue crack initiated from a different cause. Some of these causes could be eliminated in future components by better process control. In one failure, the cause was determined to be impact during a crash; the features of impact fracture were distinguished from overload fractures by direct comparisons of the received specimens with laboratory-generated failures.

  12. Identification of Bearing Failure Using Signal Vibrations

    NASA Astrophysics Data System (ADS)

    Yani, Irsyadi; Resti, Yulia; Burlian, Firmansyah

    2018-04-01

    Vibration analysis can be used to identify damage to mechanical systems such as journal bearings. Identification of failure can be done by observing the resulting vibration spectrum by measuring the vibration signal occurring in a mechanical system Bearing is one of the engine elements commonly used in mechanical systems. The main purpose of this research is to monitor the bearing condition and to identify bearing failure on a mechanical system by observing the resulting vibration. Data collection techniques based on recordings of sound caused by the vibration of the mechanical system were used in this study, then created a database system based bearing failure due to vibration signal recording sounds on a mechanical system The next step is to group the bearing damage by type based on the databases obtained. The results show the percentage of success in identifying bearing damage is 98 %.

  13. Why Do Medial Unicompartmental Knee Arthroplasties Fail Today?

    PubMed

    van der List, Jelle P; Zuiderbaan, Hendrik A; Pearle, Andrew D

    2016-05-01

    Failure rates are higher in medial unicompartmental knee arthroplasty (UKA) than total knee arthroplasty. To improve these failure rates, it is important to understand why medial UKA fail. Because individual studies lack power to show failure modes, a systematic review was performed to assess medial UKA failure modes. Furthermore, we compared cohort studies with registry-based studies, early with midterm and late failures and fixed-bearing with mobile-bearing implants. Databases of PubMed, EMBASE, and Cochrane and annual registries were searched for medial UKA failures. Studies were included when they reported >25 failures or when they reported early (<5 years), midterm (5-10 years), or late failures (>10 years). Thirty-seven cohort studies (4 level II studies and 33 level III studies) and 2 registry-based studies were included. A total of 3967 overall failures, 388 time-dependent failures, and 1305 implant design failures were identified. Aseptic loosening (36%) and osteoarthritis (OA) progression (20%) were the most common failure modes. Aseptic loosening (26%) was most common early failure mode, whereas OA progression was more commonly seen in midterm and late failures (38% and 40%, respectively). Polyethylene wear (12%) and instability (12%) were more common in fixed-bearing implants, whereas pain (14%) and bearing dislocation (11%) were more common in mobile-bearing implants. This level III systematic review identified aseptic loosening and OA progression as the major failure modes. Aseptic loosening was the main failure mode in early years and mobile-bearing implants, whereas OA progression caused most failures in late years and fixed-bearing implants. Copyright © 2016 Elsevier Inc. All rights reserved.

  14. Applications of crude incidence curves.

    PubMed

    Korn, E L; Dorey, F J

    1992-04-01

    Crude incidence curves display the cumulative number of failures of interest as a function of time. With competing causes of failure, they are distinct from cause-specific incidence curves that treat secondary types of failures as censored observations. After briefly reviewing their definition and estimation, we present five applications of crude incidence curves to show their utility in a broad range of studies. In some of these applications it is helpful to model survival-time distributions with use of two different time metameters, for example, time from diagnosis and age of the patient. We describe how one can incorporate published vital statistics into the models when secondary types of failure correspond to common causes of death.

  15. Morphological and ultrastructural evaluation of the golden retriever muscular dystrophy trachea, lungs, and diaphragm muscle.

    PubMed

    Lessa, Thais Borges; de Abreu, Dilayla Kelly; Rodrigues, Márcio Nogueira; Brólio, Marina Pandolphi; Miglino, Maria Angélica; Ambrósio, Carlos Eduardo

    2014-11-01

    Duchenne muscular dystrophy (DMD) is a genetic disease, characterized by atrophy and muscle weakness. The respiratory failure is a common cause of early death in patients with DMD. Golden retriever muscular dystrophy (GRMD) is a canine model which has been extensively used for many advances in therapeutics applications. As the patients with DMD, the GRMD frequently died from cardiac and respiratory failure. Observing the respiratory failure in DMD is one of the major causes of mortality we aimed to describe the morphological and ultrastructural data of trachea, lungs (conductive and respiratory portion of the system), and diaphragm muscle using histological and ultrastructural analysis. The diaphragm muscle showed discontinuous fibers architecture, with different diameter; a robust perimysium inflammatory infiltrate and some muscle cells displayed central nuclei. GRMD trachea and lungs presented collagen fibers and in addition, the GRMD lungs showed higher of levels collagen fibers that could limit the alveolar ducts and alveoli distension. Therefore, the most features observed were the collagen areas and fibrosis. We suggested in this study that the collagen remodeling in the trachea, lungs, and diaphragm muscle may increase fibrosis and affect the trachea, lungs, and diaphragm muscle function that can be a major cause of respiratory failure that occur in patients with DMD. © 2014 Wiley Periodicals, Inc.

  16. Heart Failure in Women

    PubMed Central

    Bozkurt, Biykem; Khalaf, Shaden

    2017-01-01

    Heart failure is an important cause of morbidity and mortality in women, and they tend to develop it at an older age compared to men. Heart failure with preserved ejection fraction is more common in women than in men and accounts for at least half the cases of heart failure in women. When comparing men and women who have heart failure and a low left ventricular ejection fraction, the women are more symptomatic and have a similarly poor outcome. Overall recommendations for guideline-directed medical therapies show no differences in treatment approaches between men and women. Overall, women are generally underrepresented in clinical trials for heart failure. Further studies are needed to shed light into different mechanisms, causes, and targeted therapies of heart failure in women. PMID:29744014

  17. Pheochromocytoma presenting with rhabdomyolysis and acute renal failure: a case report.

    PubMed

    Celik, Huseyin; Celik, Ozlem; Guldiken, Sibel; Inal, Volkan; Puyan, Fulya Oz; Tugrul, Armagan

    2014-02-01

    Rhabdomyolysis ranges from an asymptomatic illness with elevated creatine kinase levels to a life-threatening condition associated with extreme elevations in creatine kinase, electrolyte imbalances, acute renal failure, and disseminated intravascular coagulation. The most common causes are crush injury, overexertion, alcohol abuse, certain medicines, and toxic substances. A number of electrolyte abnormalities and endocrinopathies, including hypothyroidism, thyrotoxicosis, diabetic ketoacidosis, nonketotic hyperosmolar state, and hyperaldosteronism, cause rhabdomyolysis. Rhabdomyolysis and acute renal failure are unusual manifestations of pheochromocytoma. There are a few case reports with pheochromocytoma presenting rhabdomyolysis and acute renal failure. Herein, we report a case with pheochromocytoma crisis presenting with rhabdomyolysis and acute renal failure.

  18. Identification of priorities for medication safety in neonatal intensive care.

    PubMed

    Kunac, Desireé L; Reith, David M

    2005-01-01

    Although neonates are reported to be at greater risk of medication error than infants and older children, little is known about the causes and characteristics of error in this patient group. Failure mode and effects analysis (FMEA) is a technique used in industry to evaluate system safety and identify potential hazards in advance. The aim of this study was to identify and prioritize potential failures in the neonatal intensive care unit (NICU) medication use process through application of FMEA. Using the FMEA framework and a systems-based approach, an eight-member multidisciplinary panel worked as a team to create a flow diagram of the neonatal unit medication use process. Then by brainstorming, the panel identified all potential failures, their causes and their effects at each step in the process. Each panel member independently rated failures based on occurrence, severity and likelihood of detection to allow calculation of a risk priority score (RPS). The panel identified 72 failures, with 193 associated causes and effects. Vulnerabilities were found to be distributed across the entire process, but multiple failures and associated causes were possible when prescribing the medication and when preparing the drug for administration. The top ranking issue was a perceived lack of awareness of medication safety issues (RPS score 273), due to a lack of medication safety training. The next highest ranking issues were found to occur at the administration stage. Common potential failures related to errors in the dose, timing of administration, infusion pump settings and route of administration. Perceived causes were multiple, but were largely associated with unsafe systems for medication preparation and storage in the unit, variable staff skill level and lack of computerised technology. Interventions to decrease medication-related adverse events in the NICU should aim to increase staff awareness of medication safety issues and focus on medication administration processes.

  19. Etiology of pleural effusions: analysis of more than 3,000 consecutive thoracenteses.

    PubMed

    Porcel, José M; Esquerda, Aureli; Vives, Manuel; Bielsa, Silvia

    2014-05-01

    To investigate the etiology of pleural effusions (PE) in adults and the accuracy of pleural fluid (PF) cytology and cultures in malignant and infectious PE, respectively. Retrospective analysis of all consecutive patients with PE undergoing diagnostic thoracentesis during the last 19 years in a university hospital. The leading causes of PE among the 3,077 patients were: cancer (27%), heart failure (21%), pneumonia (19%), tuberculosis (9%), abdominal surgery (4%), pericardial diseases (4%) and cirrhosis (3%). Tuberculosis was the most common etiology in patients <34 years of age (52%), whereas heart failure predominated in octogenarians (45%). The most common primary tumors in malignant PE were lung (37%) and breast (16%). The overall accuracy of PF cytology was 59%, although it was significantly lower in mesotheliomas (27%) and squamous cell lung cancer (25%). In infectious PE, only 30% of cultures yielded positive results, a percentage which increased two-fold (66%) in purulent fluids (empyemas). Viridans streptococci were the most commonly isolated pathogens (25.5%). The sensitivity of solid media cultures of PF for Mycobacterium tuberculosis was low (18.5%). Three-quarters of patients with PE in whom a diagnostic thoracentesis was indicated had cancer, heart failure, pneumonia or tuberculosis. PF cytology and cultures give false negative results in a significant number of cases. Copyright © 2013 SEPAR. Published by Elsevier Espana. All rights reserved.

  20. Underlying Cause(s) of Letter Perseveration Errors

    PubMed Central

    Fischer-Baum, Simon; Rapp, Brenda

    2011-01-01

    Perseverations, the inappropriate intrusion of elements from a previous response into a current response, are commonly observed in individuals with acquired deficits. This study specifically investigates the contribution of failure-to activate and failure-to-inhibit deficit(s) in the generation of letter perseveration errors in acquired dysgraphia. We provide evidence from the performance 12 dysgraphic individuals indicating that a failure to activate graphemes for a target word gives rise to letter perseveration errors. In addition, we also provide evidence that, in some individuals, a failure-to-inhibit deficit may also contribute to the production of perseveration errors. PMID:22178232

  1. Domino effect in chemical accidents: main features and accident sequences.

    PubMed

    Darbra, R M; Palacios, Adriana; Casal, Joaquim

    2010-11-15

    The main features of domino accidents in process/storage plants and in the transportation of hazardous materials were studied through an analysis of 225 accidents involving this effect. Data on these accidents, which occurred after 1961, were taken from several sources. Aspects analyzed included the accident scenario, the type of accident, the materials involved, the causes and consequences and the most common accident sequences. The analysis showed that the most frequent causes are external events (31%) and mechanical failure (29%). Storage areas (35%) and process plants (28%) are by far the most common settings for domino accidents. Eighty-nine per cent of the accidents involved flammable materials, the most frequent of which was LPG. The domino effect sequences were analyzed using relative probability event trees. The most frequent sequences were explosion→fire (27.6%), fire→explosion (27.5%) and fire→fire (17.8%). Copyright © 2010 Elsevier B.V. All rights reserved.

  2. Program Helps In Analysis Of Failures

    NASA Technical Reports Server (NTRS)

    Stevenson, R. W.; Austin, M. E.; Miller, J. G.

    1993-01-01

    Failure Environment Analysis Tool (FEAT) computer program developed to enable people to see and better understand effects of failures in system. User selects failures from either engineering schematic diagrams or digraph-model graphics, and effects or potential causes of failures highlighted in color on same schematic-diagram or digraph representation. Uses digraph models to answer two questions: What will happen to system if set of failure events occurs? and What are possible causes of set of selected failures? Helps design reviewers understand exactly what redundancies built into system and where there is need to protect weak parts of system or remove them by redesign. Program also useful in operations, where it helps identify causes of failure after they occur. FEAT reduces costs of evaluation of designs, training, and learning how failures propagate through system. Written using Macintosh Programmers Workshop C v3.1. Can be linked with CLIPS 5.0 (MSC-21927, available from COSMIC).

  3. A Take Stock of Turbine Blades Failure Phenomenon

    NASA Astrophysics Data System (ADS)

    Roy, Abhijit

    2018-02-01

    Turbine Blade design and engineering is one of the most complicated and important aspects of turbine technology. Experiments with blades can be simple or very complicated, depending upon parameters of analysis. Turbine blades are subjected to vigorous environments, such as high temperatures, high stresses, and a potentially high vibration environment. All these factors can lead to blade failures, which can destroy the turbine, and engine, so careful design is the prime consideration to resist those conditions. A high cycle of fatigue of compressor and turbine blades due to high dynamic stress caused by blade vibration and resonance within the operating range of machinery is common failure mode for turbine machine. Continuous study and investigation on failure of turbine blades are going on since last five decades. Some review papers published during these days aiming to present a review on recent studies and investigations done on failures of turbine blades. All the detailed literature related with the turbine blades has not been described but emphasized to provide all the methodologies of failures adopted by various researches to investigate turbine blade. This paper illustrate on various factors of failure.

  4. Assessment of the risk of failure of high voltage substations due to environmental conditions and pollution on insulators.

    PubMed

    Castillo Sierra, Rafael; Oviedo-Trespalacios, Oscar; Candelo, John E; Soto, Jose D

    2015-07-01

    Pollution on electrical insulators is one of the greatest causes of failure of substations subjected to high levels of salinity and environmental pollution. Considering leakage current as the main indicator of pollution on insulators, this paper focuses on establishing the effect of the environmental conditions on the risk of failure due to pollution on insulators and determining the significant change in the magnitude of the pollution on the insulators during dry and humid periods. Hierarchical segmentation analysis was used to establish the effect of environmental conditions on the risk of failure due to pollution on insulators. The Kruskal-Wallis test was utilized to determine the significant changes in the magnitude of the pollution due to climate periods. An important result was the discovery that leakage current was more common on insulators during dry periods than humid ones. There was also a higher risk of failure due to pollution during dry periods. During the humid period, various temperatures and wind directions produced a small change in the risk of failure. As a technical result, operators of electrical substations can now identify the cause of an increase in risk of failure due to pollution in the area. The research provides a contribution towards the behaviour of the leakage current under conditions similar to those of the Colombian Caribbean coast and how they affect the risk of failure of the substation due to pollution.

  5. Sarcomere protein gene mutations and inherited heart disease: a beta-cardiac myosin heavy chain mutation causing endocardial fibroelastosis and heart failure.

    PubMed

    Kamisago, Mitsuhiro; Schmitt, Joachim P; McNamara, Dennis; Seidman, Christine; Seidman, J G

    2006-01-01

    Inherited human cardiomyopathies often lead to heart failure. A common feature of these conditions is that affected individuals can express the disease causing mutations for many years without showing clinical signs of the disease. Previous studies have demonstrated that sarcomere protein gene mutations can cause either dilated cardiomyopathy or hypertrophic cardiomyopathy. Here we demonstrate that the Arg442His missense mutation in beta-cardiac myosin heavy chain (betaMHC) causes dilated cardiomyopathy, endocardial fibroelastosis and heart failure at a very early age. Using standard genetic engineering tools we and others have made murine models by introducing human disease causing mutations into mice. The central hypothesis of these studies has been that by identifying the pathophysiological pathways activated by these mutations we can define enzymatic activities that are modified during the disease process and which may be involved in pathways that involve more common forms of cardiac disease. Murine models bearing different mutant myosins are being used to address whether each disease causing mutant betaMHC activates the same or different cellular pathways. Dissecting the molecular pathways modulated by mutations in sarcomere protein genes as well as other genes has already demonstrated that there are multiple pathways leading to cardiac remodelling and heart failure. Defining the mechanisms by which mutations in the same genes activate different cellular pathways remains an important question.

  6. Communication errors in radiology - Pitfalls and how to avoid them.

    PubMed

    Waite, Stephen; Scott, Jinel Moore; Drexler, Ian; Martino, Jennifer; Legasto, Alan; Gale, Brian; Kolla, Srinivas

    2018-06-07

    Communication failures are a common cause of patient harm and malpractice claims against radiologists. In addition to overt communication breakdowns among providers, it is also important to address the quality of communication to optimize patient outcomes. In this review, we describe common communication failures and potential solutions providing a framework for radiologists to improve health care delivery. Copyright © 2018. Published by Elsevier Inc.

  7. One versus two venous anastomoses in microsurgical head and neck reconstruction: a cumulative meta-analysis.

    PubMed

    Christianto, S; Lau, A; Li, K Y; Yang, W F; Su, Y X

    2018-05-01

    Venous compromise is still the most common cause of free flap failure. The use of two venous anastomoses has been advocated to reduce venous compromise. However, the effectiveness of this approach remains controversial. A systematic review and cumulative meta-analysis was performed to assess the effect of one versus two venous anastomoses on venous compromise and free flap failure in head and neck microsurgical reconstruction. A total of 27 articles reporting 7389 flaps were included in this study. On comparison of one versus two venous anastomoses, the odds ratio (OR) for flap failure was 1.66 (95% confidence interval 1.11-2.50; P=0.014) and for venous compromise was 1.50 (95% confidence interval 1.10-2.05; P=0.011), suggesting a significant increase in the flap failure rate and venous compromise rate in the single venous anastomosis group. These results show that the execution of two venous anastomoses has significant effects on reducing the vascular compromise and free flap failure rate in head and neck reconstruction. Copyright © 2018 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  8. CRANS - CONFIGURABLE REAL-TIME ANALYSIS SYSTEM

    NASA Technical Reports Server (NTRS)

    Mccluney, K.

    1994-01-01

    In a real-time environment, the results of changes or failures in a complex, interconnected system need evaluation quickly. Tabulations showing the effects of changes and/or failures of a given item in the system are generally only useful for a single input, and only with regard to that item. Subsequent changes become harder to evaluate as combinations of failures produce a cascade effect. When confronted by multiple indicated failures in the system, it becomes necessary to determine a single cause. In this case, failure tables are not very helpful. CRANS, the Configurable Real-time ANalysis System, can interpret a logic tree, constructed by the user, describing a complex system and determine the effects of changes and failures in it. Items in the tree are related to each other by Boolean operators. The user is then able to change the state of these items (ON/OFF FAILED/UNFAILED). The program then evaluates the logic tree based on these changes and determines any resultant changes to other items in the tree. CRANS can also search for a common cause for multiple item failures, and allow the user to explore the logic tree from within the program. A "help" mode and a reference check provide the user with a means of exploring an item's underlying logic from within the program. A commonality check determines single point failures for an item or group of items. Output is in the form of a user-defined matrix or matrices of colored boxes, each box representing an item or set of items from the logic tree. Input is via mouse selection of the matrix boxes, using the mouse buttons to toggle the state of the item. CRANS is written in C-language and requires the MIT X Window System, Version 11 Revision 4 or Revision 5. It requires 78K of RAM for execution and a three button mouse. It has been successfully implemented on Sun4 workstations running SunOS, HP9000 workstations running HP-UX, and DECstations running ULTRIX. No executable is provided on the distribution medium; however, a sample makefile is included. Sample input files are also included. The standard distribution medium is a .25 inch streaming magnetic tape cartridge (Sun QIC-24) in UNIX tar format. Alternate distribution media and formats are available upon request. This program was developed in 1992.

  9. A systems engineering approach to automated failure cause diagnosis in space power systems

    NASA Technical Reports Server (NTRS)

    Dolce, James L.; Faymon, Karl A.

    1987-01-01

    Automatic failure-cause diagnosis is a key element in autonomous operation of space power systems such as Space Station's. A rule-based diagnostic system has been developed for determining the cause of degraded performance. The knowledge required for such diagnosis is elicited from the system engineering process by using traditional failure analysis techniques. Symptoms, failures, causes, and detector information are represented with structured data; and diagnostic procedural knowledge is represented with rules. Detected symptoms instantiate failure modes and possible causes consistent with currently held beliefs about the likelihood of the cause. A diagnosis concludes with an explanation of the observed symptoms in terms of a chain of possible causes and subcauses.

  10. Failure-Modes-And-Effects Analysis Of Software Logic

    NASA Technical Reports Server (NTRS)

    Garcia, Danny; Hartline, Thomas; Minor, Terry; Statum, David; Vice, David

    1996-01-01

    Rigorous analysis applied early in design effort. Method of identifying potential inadequacies and modes and effects of failures caused by inadequacies (failure-modes-and-effects analysis or "FMEA" for short) devised for application to software logic.

  11. 40 CFR 63.301 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... by common walls, where coal undergoes destructive distillation under positive pressure to produce..., infrequent, and not reasonably preventable failure of air pollution control equipment, process equipment, or... emission limitations in an applicable standard to be exceeded. Failures caused in part by poor maintenance...

  12. Dialysis Arteriovenous Fistula Failure and Angioplasty: Intimal Hyperplasia and Other Causes of Access Failure.

    PubMed

    Duque, Juan C; Tabbara, Marwan; Martinez, Laisel; Cardona, Jose; Vazquez-Padron, Roberto I; Salman, Loay H

    2017-01-01

    The arteriovenous fistula (AVF) is the preferred hemodialysis access type because it has better patency rates and fewer complications than other access types. However, primary failure remains a common problem impeding AVF maturation and adding to patients' morbidity and mortality. Juxta-anastomotic (or inflow) stenosis is the most common reason leading to primary failure, and percutaneous transluminal angioplasty continues to be the gold-standard treatment with excellent success rates. Intimal hyperplasia (IH) has been traditionally blamed as the main pathophysiologic culprit, but new evidence raises doubts regarding the contribution of IH alone to primary failure. We report a 64-year-old man with a 2-stage brachiobasilic AVF that was complicated by failure 4 months after creation. An angiogram showed multiple juxta-anastomotic and midfistula stenotic lesions. Percutaneous transluminal angioplasty was successful in assisting maturation and subsequently cannulating the AVF for hemodialysis treatment. We failed to identify the underlying cause of stenosis because biopsy specimens from fistula tissue obtained at the time of transposition revealed no occlusive IH. This case emphasizes the need for additional research on factors contributing to AVF failure besides IH and highlights the need for more therapeutic options to reduce AVF failure rate. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  13. Drugs That May Cause or Exacerbate Heart Failure: A Scientific Statement From the American Heart Association.

    PubMed

    Page, Robert L; O'Bryant, Cindy L; Cheng, Davy; Dow, Tristan J; Ky, Bonnie; Stein, C Michael; Spencer, Anne P; Trupp, Robin J; Lindenfeld, JoAnn

    2016-08-09

    Heart failure is a common, costly, and debilitating syndrome that is associated with a highly complex drug regimen, a large number of comorbidities, and a large and often disparate number of healthcare providers. All of these factors conspire to increase the risk of heart failure exacerbation by direct myocardial toxicity, drug-drug interactions, or both. This scientific statement is designed to serve as a comprehensive and accessible source of drugs that may cause or exacerbate heart failure to assist healthcare providers in improving the quality of care for these patients. © 2016 American Heart Association, Inc.

  14. Pulmonary Hypertension Overview

    MedlinePlus

    ... well as sleep apnea, are common causes of secondary pulmonary hypertension. Other causes include the following: Congestive heart failure Birth defects in the heart Chronic pulmonary thromboembolism (blood clots in the pulmonary arteries) Acquired immunodeficiency syndrome ( ...

  15. 3-Dimensional Root Cause Diagnosis via Co-analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zheng, Ziming; Lan, Zhiling; Yu, Li

    2012-01-01

    With the growth of system size and complexity, reliability has become a major concern for large-scale systems. Upon the occurrence of failure, system administrators typically trace the events in Reliability, Availability, and Serviceability (RAS) logs for root cause diagnosis. However, RAS log only contains limited diagnosis information. Moreover, the manual processing is time-consuming, error-prone, and not scalable. To address the problem, in this paper we present an automated root cause diagnosis mechanism for large-scale HPC systems. Our mechanism examines multiple logs to provide a 3-D fine-grained root cause analysis. Here, 3-D means that our analysis will pinpoint the failure layer,more » the time, and the location of the event that causes the problem. We evaluate our mechanism by means of real logs collected from a production IBM Blue Gene/P system at Oak Ridge National Laboratory. It successfully identifies failure layer information for 219 failures during 23-month period. Furthermore, it effectively identifies the triggering events with time and location information, even when the triggering events occur hundreds of hours before the resulting failures.« less

  16. [Acute renal failure due to obstructive ureteral stone associated with norovirus gastroenteritis in an infant with congenital solitary kidney].

    PubMed

    Kato, Taiki; Hamano, Atsushi; Kawamura, Hideki

    2014-10-01

    We report a 35 month-old boy with acute renal failure caused by an obstructive ureteral stone associated with norovirus gastroenteritis. He visited his family physician because of fever, abdominal pain and vomiting. He was diagnosed as acute gastroenteritis. The symptoms relieved once, but abdominal pain and vomiting recurred two days after the visit and the volume of urine decreased. He was diagnosed as norovirus gastoenteritis and acute renal failure which was unresponsive to fluid replacement. Ultrasound study of the abdomen showed a solitary kidney with mild hydronephrosis. He was then admitted to our hospital. He was finally diagnosed as acute postrenal failure due to obstructive ureteral stone with left solitary kidney by abdominal computer tomography (CT). We performed transurethral catheterization immediately. The creatinine and blood urea nitrogen returned to normal level in 2 days. The CT performed on the 28th day post operation showed disappearance of the stone after uric alkalization. Recently, some cases of postrenal failure due to bilateral obstructive ureteral stones, mainly ammonium acid urate stones, associated with viral gastroenteritis were reported. As clinical features, they are common in boys three years or younger after an episode of rotavirus gastroenteritis with high uric acid concentration. By far, the most common cause of acute renal failure in patients with severe gastroenteritis is prerenal failure resulting from hypovolemia. But postrenal cause due to bilateral obstructive stones should be taken in a consideration.

  17. Shoshin beriberi induced by long-term administration of diuretics: a case report.

    PubMed

    Misumida, Naoki; Umeda, Hisashi; Iwase, Mitsunori

    2014-01-01

    Previous studies have suggested that diuretic therapy for heart failure may lead to thiamine deficiency due to the increased urinary thiamine excretion. Herein, we present the case of a 61-year-old man with shoshin beriberi, a fulminant form of wet beriberi, induced by long-term diuretic therapy. The patient had a history of heart failure with preserved ejection fraction and was receiving furosemide and trichlormethiazide therapy. He presented with worsening exertional dyspnea and was admitted for heart failure exacerbation. His condition failed to improve even after intensive treatment. A hemodynamic evaluation with the Swan-Ganz catheter revealed high-output heart failure with low peripheral vascular resistance. Thiamine was administered for suspected shoshin beriberi; his hemodynamic status improved dramatically within the next six hours. The serum thiamine level was below the normal range; the patient was therefore diagnosed with shoshin beriberi. The common causes of thiamine deficiency were not identified. Long-term diuretic therapy with furosemide and thiazide was thought to have played a major role in the development of thiamine deficiency. This case illustrates the importance of considering wet beriberi as a possible cause of heart failure exacerbation in patients taking diuretics, even when the common thiamine deficiency causes are not identified with history-taking.

  18. Metallurgical failure analysis of MH-1A reactor core hold-down bolts. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hawthorne, J.R.; Watson, H.E.

    1976-11-01

    The Naval Research Laboratory has performed a failure analysis on two MH-1A reactor core hold-down bolts that broke in service. Adherence to fabrication specifications, post-service properties and possible causes of bolt failure were investigated. The bolt material was verified as 17-4PH precipitation hardening stainless steel. Measured bolt dimensions also were in accordance with fabrication drawing specifications. Bolt failure occurred in the region of a locking pin hole which reduced the bolt net section by 47 percent. The failure analysis indicates that the probable cause of failure was net section overloading resulting from a lateral bending force on the bolt. Themore » analysis indicates that net section overloading could also have resulted from combined tensile stresses (bolt preloading plus differential thermal expansion). Recommendations are made for improved bolting.« less

  19. Bearing failure detection of micro wind turbine via power spectral density analysis for stator current signals spectrum

    NASA Astrophysics Data System (ADS)

    Mahmood, Faleh H.; Kadhim, Hussein T.; Resen, Ali K.; Shaban, Auday H.

    2018-05-01

    The failure such as air gap weirdness, rubbing, and scrapping between stator and rotor generator arise unavoidably and may cause extremely terrible results for a wind turbine. Therefore, we should pay more attention to detect and identify its cause-bearing failure in wind turbine to improve the operational reliability. The current paper tends to use of power spectral density analysis method of detecting internal race and external race bearing failure in micro wind turbine by estimation stator current signal of the generator. The failure detector method shows that it is well suited and effective for bearing failure detection.

  20. Recruitment failure and futility were the most common reasons for discontinuation of clinical drug trials. Results of a nationwide inception cohort study in the Netherlands.

    PubMed

    van den Bogert, Cornelis A; Souverein, Patrick C; Brekelmans, Cecile T M; Janssen, Susan W J; Koëter, Gerard H; Leufkens, Hubert G M; Bouter, Lex M

    2017-08-01

    The objective of the study was to identify the reasons for discontinuation of clinical drug trials and to evaluate whether efficacy-related discontinuations were adequately planned in the trial protocol. All clinical drug trials in the Netherlands, reviewed by institutional review boards in 2007, were followed until December 2015. Data were obtained through the database of the Dutch competent authority (Central Committee on Research Involving Human Subjects [CCMO]) and a questionnaire to the principal investigators. Reasons for trial discontinuation were the primary outcome of the study. Three reasons for discontinuation were analyzed separately: all cause, recruitment failure, and efficacy related (when an interim analysis had demonstrated futility or superiority). Among the efficacy-related discontinuations, we examined whether the data monitoring committee, the stopping rule, and the moment of the interim analysis in the trial progress were specified in the trial protocol. Of the 574 trials, 102 (17.8%) were discontinued. The most common reasons were recruitment failure (33 of 574; 5.7%) and solely efficacy related (30 of 574; 5.2%). Of the efficacy-related discontinuations, 10 of 30 (33.3%) of the trial protocols reported all three aspects in the trial protocol, and 20 of 30 (66.7%) reported at least one aspect in the trial protocol. One out of five clinical drug trials is discontinued before the planned trial end, with recruitment failure and futility as the most common reasons. The target sample size of trials should be feasible, and interim analyses should be adequately described in trial protocols. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. Heart failure in sub-Saharan Africa: A contemporaneous systematic review and meta-analysis.

    PubMed

    Agbor, Valirie N; Essouma, Mickael; Ntusi, Ntobeko A B; Nyaga, Ulrich Flore; Bigna, Jean Joel; Noubiap, Jean Jacques

    2018-04-15

    To summarise available data on the prevalence, aetiology, treatment and prognosis of heart failure (HF) in sub-Saharan Africa (SSA). This systematic review and meta-analysis included data from individuals recruited in primary to tertiary health facilities in SSA. All published and unpublished literatures between January 1, 1996 and June 23, 2017, of individuals aged 12years and older and residing in sub-Saharan Africa. They must be of African descent. Number of heart failure admissions into general wards or HF clinics; number of cases of the different aetiologies of HF; number of participants on the different medications for HF; number of cases of all-cause mortality in participants with HF, and the predictors of all-cause mortality. Due to a limited word count, only results on the aetiologies of HF will be presented in the abstract. Thirty five full text articles were selected after screening of an initial 3785 titles and abstract. Hypertensive heart disease (HHD) (39.2% [95% CI=32.6-45.9]) was the commonest cause of HF in SSA, followed by cardiomyopathies (CMO) (21.4% [95% CI=16.0-27.2]) and rheumatic heart disease (RHD) (14.1% [95% CI=10.0-18.8]). Ischaemic heart disease (7.2% [95% CI=4.1-11.0]) was rare. HHD, CMO and RHD are the most common causes of HF in SSA, with HHD and CMO responsible for over 50% of the cases. Also, the last two decades have witnessed a relative reduction in the prevalence of RHD below 15.0%. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Understanding the causes of kidney transplant failure: the dominant role of antibody-mediated rejection and nonadherence.

    PubMed

    Sellarés, J; de Freitas, D G; Mengel, M; Reeve, J; Einecke, G; Sis, B; Hidalgo, L G; Famulski, K; Matas, A; Halloran, P F

    2012-02-01

    We prospectively studied kidney transplants that progressed to failure after a biopsy for clinical indications, aiming to assign a cause to every failure. We followed 315 allograft recipients who underwent indication biopsies at 6 days to 32 years posttransplant. Sixty kidneys progressed to failure in the follow-up period (median 31.4 months). Failure was rare after T-cell-mediated rejection and acute kidney injury and common after antibody-mediated rejection or glomerulonephritis. We developed rules for using biopsy diagnoses, HLA antibody and clinical data to explain each failure. Excluding four with missing information, 56 failures were attributed to four causes: rejection 36 (64%), glomerulonephritis 10 (18%), polyoma virus nephropathy 4 (7%) and intercurrent events 6 (11%). Every rejection loss had evidence of antibody-mediated rejection by the time of failure. Among rejection losses, 17 of 36 (47%) had been independently identified as nonadherent by attending clinicians. Nonadherence was more frequent in patients who progressed to failure (32%) versus those who survived (3%). Pure T-cell-mediated rejection, acute kidney injury, drug toxicity and unexplained progressive fibrosis were not causes of loss. This prospective cohort indicates that many actual failures after indication biopsies manifest phenotypic features of antibody-mediated or mixed rejection and also underscores the major role of nonadherence. © 2011 The American Society of Transplantation and the American Society of Transplant Surgeons.

  3. SPECT and PET in ischemic heart failure.

    PubMed

    Angelidis, George; Giamouzis, Gregory; Karagiannis, Georgios; Butler, Javed; Tsougos, Ioannis; Valotassiou, Varvara; Giannakoulas, George; Dimakopoulos, Nikolaos; Xanthopoulos, Andrew; Skoularigis, John; Triposkiadis, Filippos; Georgoulias, Panagiotis

    2017-03-01

    Heart failure is a common clinical syndrome associated with significant morbidity and mortality worldwide. Ischemic heart disease is the leading cause of heart failure, at least in the industrialized countries. Proper diagnosis of the syndrome and management of patients with heart failure require anatomical and functional information obtained through various imaging modalities. Nuclear cardiology techniques play a main role in the evaluation of heart failure. Myocardial single photon emission computed tomography (SPECT) with thallium-201 or technetium-99 m labelled tracers offer valuable data regarding ventricular function, myocardial perfusion, viability, and intraventricular synchronism. Moreover, positron emission tomography (PET) permits accurate evaluation of myocardial perfusion, metabolism, and viability, providing high-quality images and the ability of quantitative analysis. As these imaging techniques assess different parameters of cardiac structure and function, variations of sensitivity and specificity have been reported among them. In addition, the role of SPECT and PET guided therapy remains controversial. In this comprehensive review, we address these controversies and report the advances in patient's investigation with SPECT and PET in ischemic heart failure. Furthermore, we present the innovations in technology that are expected to strengthen the role of nuclear cardiology modalities in the investigation of heart failure.

  4. Why are some patients with Duchenne muscular dystrophy dying young: An analysis of causes of death in North East England.

    PubMed

    Van Ruiten, H J A; Marini Bettolo, C; Cheetham, T; Eagle, M; Lochmuller, H; Straub, V; Bushby, K; Guglieri, M

    2016-11-01

    Duchenne muscular dystrophy (DMD) is the most common inherited muscle disease in children. Recent years have seen an increase in age of survival into adulthood following the introduction of proactive standards of care. We reviewed mortality in DMD in our population in order to identify potential underlying risk factors for premature death and improve clinical care. A retrospective case note review of all deaths in the DMD population over the last 10 years in North East England. We identified 2 groups of patients: patients who died from underlying cardiac and/or respiratory failure (group 1) and patients who died unexpectedly in the absence of underlying cardio-respiratory failure (group 2). Detailed information was available on 21 patients. Mean age of death in group 1 (17 patients) was 23.9 (14.4-39.5) years, in group 2 (4 patients) 14 (12.7-14.9) years. Causes of death in group 2 were acute pneumonia, cardiac arrest, acute respiratory distress and multi-organ failure. Across both groups we identified concerns regarding respiratory failure, inadequate nutrition, non-attendance at appointments, suboptimal coordination of care and decreased psychological wellbeing. In group 2, fat embolism, cardiac arrhythmia and adrenal insufficiency were also potential contributing factors. The main cause of death in DMD in our population remains cardio-respiratory failure. Four patients (19%) died in their teenage years in the absence of severe cardiorespiratory failure. A more thorough understanding of the impact of DMD and its treatment on all organs systems is required to minimise the risk of an untimely death. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  5. Comorbidities of COPD.

    PubMed

    Cavaillès, Arnaud; Brinchault-Rabin, Graziella; Dixmier, Adrien; Goupil, François; Gut-Gobert, Christophe; Marchand-Adam, Sylvain; Meurice, Jean-Claude; Morel, Hugues; Person-Tacnet, Christine; Leroyer, Christophe; Diot, Patrice

    2013-12-01

    By 2020, chronic obstructive pulmonary disease (COPD) will be the third cause of mortality. Extrapulmonary comorbidities influence the prognosis of patients with COPD. Tobacco smoking is a common risk factor for many comorbidities, including coronary heart disease, heart failure and lung cancer. Comorbidities such as pulmonary artery disease and malnutrition are directly caused by COPD, whereas others, such as systemic venous thromboembolism, anxiety, depression, osteoporosis, obesity, metabolic syndrome, diabetes, sleep disturbance and anaemia, have no evident physiopathological relationship with COPD. The common ground between most of these extrapulmonary manifestations is chronic systemic inflammation. All of these diseases potentiate the morbidity of COPD, leading to increased hospitalisations and healthcare costs. They can frequently cause death, independently of respiratory failure. Comorbidities make the management of COPD difficult and need to be evaluated and treated adequately.

  6. A study on risk factors and diagnostic efficiency of posthepatectomy liver failure in the nonobstructive jaundice.

    PubMed

    Wang, He; Lu, Shi-Chun; He, Lei; Dong, Jia-Hong

    2018-02-01

    Liver failure remains as the most common complication and cause of death after hepatectomy, and continues to be a challenge for doctors.t test and χ test were used for single factor analysis of data-related variables, then results were introduced into the model to undergo the multiple factors logistic regression analysis. Pearson correlation analysis was performed for related postoperative indexes, and a diagnostic evaluation was performed using the receiver operating characteristic (ROC) of postoperative indexes.Differences in age, body mass index (BMI), portal vein hypertension, bile duct cancer, total bilirubin, alkaline phosphatase (ALP), gamma-glutamyl transpeptidase (GGT), operation time, cumulative portal vein occlusion time, intraoperative blood volume, residual liver volume (RLV)/entire live rvolume, ascites volume at postoperative day (POD)3, supplemental albumin amount at POD3, hospitalization time after operation, and the prothrombin activity (PTA) were statistically significant. Furthermore, there were significant differences in total bilirubin and the supplemental albumin amount at POD3. ROC analysis of the average PTA, albumin amounts, ascites volume at POD3, and their combined diagnosis were performed, which had diagnostic value for postoperative liver failure (area under the curve (AUC): 0.895, AUC: 0.798, AUC: 0.775, and AUC: 0.903).Preoperative total bilirubin level and the supplemental albumin amount at POD3 were independent risk factors. PTA can be used as the index of postoperative liver failure, and the combined diagnosis of the indexes can improve the early prediction of postoperative liver failure.

  7. Root Cause Failure Analysis of Stator Winding Insulation failure on 6.2 MW hydropower generator

    NASA Astrophysics Data System (ADS)

    Adhi Nugroho, Agus; Widihastuti, Ida; Ary, As

    2017-04-01

    Insulation failure on generator winding insulation occurred in the Wonogiri Hydropower plant has caused stator damage since ase was short circuited to ground. The fault has made the generator stop to operate. Wonogiri Hydropower plant is one of the hydroelectric plants run by PT. Indonesia Power UBP Mrica with capacity 2 × 6.2 MW. To prevent damage to occur again on hydropower generators, an analysis is carried out using Root Cause Failure Analysis RCFA is a systematic approach to identify the root cause of the main orbasic root cause of a problem or a condition that is not wanted. There are several aspects to concerned such as: loading pattern and operations, protection systems, generator insulation resistance, vibration, the cleanliness of the air and the ambient air. Insulation damage caused by gradual inhomogeneous cooling at the surface of winding may lead in to partial discharge. In homogeneous cooling may present due to lattice hampered by dust and oil deposits. To avoid repetitive defects and unwanted condition above, it is necessary to perform major maintenance overhaul every 5000-6000 hours of operation.

  8. Finite Element Creep-Fatigue Analysis of a Welded Furnace Roll for Identifying Failure Root Cause

    NASA Astrophysics Data System (ADS)

    Yang, Y. P.; Mohr, W. C.

    2015-11-01

    Creep-fatigue induced failures are often observed in engineering components operating under high temperature and cyclic loading. Understanding the creep-fatigue damage process and identifying failure root cause are very important for preventing such failures and improving the lifetime of engineering components. Finite element analyses including a heat transfer analysis and a creep-fatigue analysis were conducted to model the cyclic thermal and mechanical process of a furnace roll in a continuous hot-dip coating line. Typically, the roll has a short life, <1 year, which has been a problem for a long time. The failure occurred in the weld joining an end bell to a roll shell and resulted in the complete 360° separation of the end bell from the roll shell. The heat transfer analysis was conducted to predict the temperature history of the roll by modeling heat convection from hot air inside the furnace. The creep-fatigue analysis was performed by inputting the predicted temperature history and applying mechanical loads. The analysis results showed that the failure was resulted from a creep-fatigue mechanism rather than a creep mechanism. The difference of material properties between the filler metal and the base metal is the root cause for the roll failure, which induces higher creep strain and stress in the interface between the weld and the HAZ.

  9. 32-Bit-Wide Memory Tolerates Failures

    NASA Technical Reports Server (NTRS)

    Buskirk, Glenn A.

    1990-01-01

    Electronic memory system of 32-bit words corrects bit errors caused by some common type of failures - even failure of entire 4-bit-wide random-access-memory (RAM) chip. Detects failure of two such chips, so user warned that ouput of memory may contain errors. Includes eight 4-bit-wide DRAM's configured so each bit of each DRAM assigned to different one of four parallel 8-bit words. Each DRAM contributes only 1 bit to each 8-bit word.

  10. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dana L. Kelly

    Typical engineering systems in applications with high failure consequences such as nuclear reactor plants often employ redundancy and diversity of equipment in an effort to lower the probability of failure and therefore risk. However, it has long been recognized that dependencies exist in these redundant and diverse systems. Some dependencies, such as common sources of electrical power, are typically captured in the logic structure of the risk model. Others, usually referred to as intercomponent dependencies, are treated implicitly by introducing one or more statistical parameters into the model. Such common-cause failure models have limitations in a simulation environment. In addition,more » substantial subjectivity is associated with parameter estimation for these models. This paper describes an approach in which system performance is simulated by drawing samples from the joint distributions of dependent variables. The approach relies on the notion of a copula distribution, a notion which has been employed by the actuarial community for ten years or more, but which has seen only limited application in technological risk assessment. The paper also illustrates how equipment failure data can be used in a Bayesian framework to estimate the parameter values in the copula model. This approach avoids much of the subjectivity required to estimate parameters in traditional common-cause failure models. Simulation examples are presented for failures in time. The open-source software package R is used to perform the simulations. The open-source software package WinBUGS is used to perform the Bayesian inference via Markov chain Monte Carlo sampling.« less

  11. Application of multi attribute failure mode analysis of milk production using analytical hierarchy process method

    NASA Astrophysics Data System (ADS)

    Rucitra, A. L.

    2018-03-01

    Pusat Koperasi Induk Susu (PKIS) Sekar Tanjung, East Java is one of the modern dairy industries producing Ultra High Temperature (UHT) milk. A problem that often occurs in the production process in PKIS Sekar Tanjung is a mismatch between the production process and the predetermined standard. The purpose of applying Analytical Hierarchy Process (AHP) was to identify the most potential cause of failure in the milk production process. Multi Attribute Failure Mode Analysis (MAFMA) method was used to eliminate or reduce the possibility of failure when viewed from the failure causes. This method integrates the severity, occurrence, detection, and expected cost criteria obtained from depth interview with the head of the production department as an expert. The AHP approach was used to formulate the priority ranking of the cause of failure in the milk production process. At level 1, the severity has the highest weight of 0.41 or 41% compared to other criteria. While at level 2, identifying failure in the UHT milk production process, the most potential cause was the average mixing temperature of more than 70 °C which was higher than the standard temperature (≤70 ° C). This failure cause has a contributes weight of 0.47 or 47% of all criteria Therefore, this study suggested the company to control the mixing temperature to minimise or eliminate the failure in this process.

  12. Analysis of the cause of failure in nonsurgical endodontic treatment by microscopic inspection during endodontic microsurgery.

    PubMed

    Song, Minju; Kim, Hyeon-Cheol; Lee, Woocheol; Kim, Euiseong

    2011-11-01

    This study examined the clinical causes of failure and the limitation of a previous endodontic treatment by an inspection of the root apex and resected root surface at 26× magnification during endodontic microsurgery. The data were collected from patients in the Department of Conservative Dentistry at the Dental College, Yonsei University in Seoul, Korea between March 2001 and January 2011. All root-filled cases with symptomatic or asymptomatic apical periodontitis were enrolled in this study. All surgical procedures were performed by using an operating microscope. The surface of the apical root to be resected or the resected root surface after methylene blue staining was examined during the surgical procedure and recorded carefully with 26× magnification to determine the state of the previous endodontic treatment by using an operating microscope. Among the 557 cases with periapical surgery, 493 teeth were included in this study. With the exclusion of unknown cases, the most common possible cause of failure was perceived leakage around the canal filling material (30.4%), followed by a missing canal (19.7%), underfilling (14.2%), anatomical complexity (8.7%), overfilling (3.0%), iatrogenic problems (2.8%), apical calculus (1.8%), and cracks (1.2%). The frequency of possible failure causes differed according to the tooth position (P < .001). An appreciation of the root canal anatomy by using an operating microscope in nonsurgical endodontic treatment can make the prognosis more predictable and favorable. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  13. Waiting to inhale: An exploratory review of conditions that may predispose to pulmonary hypertension and right heart failure in persons exposed to household air pollution in low- and middle-income countries

    PubMed Central

    Bloomfield, Gerald S.; Lagat, David K.; Akwanalo, O. Constantine; Carter, E. Jane; Lugogo, Njira; Vedanthan, Rajesh; Velazquez, Eric J.; Kimaiyo, Sylvester; Sherman, Charles B.

    2012-01-01

    The health effects of exposure to household air pollution are gaining international attention. While the bulk of the known mortality estimates due to these exposures are derived from respiratory conditions, there is growing evidence of adverse cardiovascular health effects. Pulmonary hypertension and right heart failure are common conditions in low- and middle-income countries whose etiology may be related to common exposures in these regions such as schistosomiasis, human immunodeficiency virus, tuberculosis infections and other causes. While little is known of the interplay between exposure to household air pollution, right heart function and such conditions, the large burden of pulmonary hypertension and right heart failure in regions where there is significant exposure to household air pollution raises the possibility of a linkage. This review is presented in three parts. First, we explore what is known about pulmonary hypertension and right heart failure in low- and middle-income countries by focusing on eight common causes thereof. We then review what is known of the impact of household air pollution on pulmonary hypertension and posit that when individuals with one of these eight common comorbidities are exposed to household air pollution they may be predisposed to develop pulmonary hypertension or right heart failure. Lastly, we posit that there may be a direct link between exposure to household air pollution and right heart failure independent of pre-existing conditions which merits further investigation. Our overall aim is to highlight the multifactorial nature of these complex relationships and offer avenues for research in this expanding field of study. PMID:23687634

  14. Electrocardiographic and autonomic effects of acute particulate matter (PM) exposure in a rat model of cardiomyopathy

    EPA Science Inventory

    Human exposure to ambient PM from fossil-fuel emissions is linked to cardiovascular disease and death. This association strengthens in people with preexisting cardiac disease--especially heart failure (HF). Cardiomyopathy is the most common cause of heart failure. The mechanisms ...

  15. 26 CFR 1.1502-75 - Filing of consolidated returns.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... the common parent, may for good cause shown grant permission to a group to discontinue filing... extensions of time) for the filing of the common parent's return. Such consolidated return may not be... the common parent corporation establishes to the satisfaction of the Commissioner that the failure of...

  16. Causes and risk factors for fatal accidents in non-commercial twin engine piston general aviation aircraft.

    PubMed

    Boyd, Douglas D

    2015-04-01

    Accidents in twin-engine aircraft carry a higher risk of fatality compared with single engine aircraft and constitute 9% of all general aviation accidents. The different flight profile (higher airspeed, service ceiling, increased fuel load, and aircraft yaw in engine failure) may make comparable studies on single-engine aircraft accident causes less relevant. The objective of this study was to identify the accident causes for non-commercial operations in twin engine aircraft. A NTSB accident database query for accidents in twin piston engine airplanes of 4-8 seat capacity with a maximum certified weight of 3000-8000lbs. operating under 14CFR Part 91 for the period spanning 2002 and 2012 returned 376 accidents. Accident causes and contributing factors were as per the NTSB final report categories. Total annual flight hour data for the twin engine piston aircraft fleet were obtained from the FAA. Statistical analyses employed Chi Square, Fisher's Exact and logistic regression analysis. Neither the combined fatal/non-fatal accident nor the fatal accident rate declined over the period spanning 2002-2012. Under visual weather conditions, the largest number, n=27, (27%) of fatal accidents was attributed to malfunction with a failure to follow single engine procedures representing the most common contributing factor. In degraded visibility, poor instrument approach procedures resulted in the greatest proportion of fatal crashes. Encountering thunderstorms was the most lethal of all accident causes with all occupants sustaining fatal injuries. At night, a failure to maintain obstacle/terrain clearance was the most common accident cause leading to 36% of fatal crashes. The results of logistic regression showed that operations at night (OR 3.7), off airport landings (OR 14.8) and post-impact fire (OR 7.2) all carried an excess risk of a fatal flight. This study indicates training areas that should receive increased emphasis for twin-engine training/recency. First, increased training should be provided on single engine procedures in the event of an engine failure. Second, more focus should be placed on instrument approaches and recovery from unusual aircraft attitude where visibility is degraded. Third, pilots should be made aware of appropriate speed selection for inadvertent flights in convective weather. Finally, emphasizing the importance of conducting night operations under instrument flight rules with its altitude restrictions should lead to a diminished proportion of accidents attributed to failure to maintain obstacle/terrain clearance. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. An up-date on Giardia and giardiasis.

    PubMed

    Einarsson, Elin; Ma'ayeh, Showgy; Svärd, Staffan G

    2016-12-01

    Giardia intestinalis is a non-invasive protozoan parasite infecting the upper small intestine causing acute, watery diarrhea or giardiasis in 280 million people annually. Asymptomatic infections are equally common and recent data have suggested that infections even can be protective against other diarrheal diseases. Most symptomatic infections resolve spontaneously but infections can lead to chronic disease and treatment failures are becoming more common world-wide. Giardia infections can also result in irritable bowel syndrome (IBS) and food allergies after resolution. Until recently not much was known about the mechanism of giardiasis or the cause of post-giardiasis syndromes and treatment failures, but here we will describe the recent progress in these areas. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. [Common law study of the legal responsibility of health care staff related to drug reformulation].

    PubMed

    Reche-Castex, F J; Alonso Herreros, J M

    2005-01-01

    To analyze the responsibility of health care staff in drug reformulation (change of dose, pharmaceutical form or route of administration of medicinal products) based on the common law of the High Court and the National Court. Search and analysis of common law and legal studies included in databases "El Derecho", "Difusión Jurídica" and "Indret". Health care staff has means--not outcomes--obligations according to the care standards included in the "Lex Artis" that can go beyond the mere legal standards. Failure to apply these care standards, denial of assistance or disrespect to the autonomy of the patient can be negligent behavior. We found 4 cases in common law. In the two cases in which care standards were complied with, including reformulation, health care professionals were acquitted, whereas in the other two cases in which reformulations were not used even though the "Lex Artis" required them, the professionals were condemned. Reformulation of medicinal products, as set forth in the Lex Artis, is a practice accepted by the High Court and the National Court and failure to use it when the scientific knowledge advises so is a cause for conviction.

  19. Effect and clinical prediction of worsening renal function in acute decompensated heart failure.

    PubMed

    Breidthardt, Tobias; Socrates, Thenral; Noveanu, Markus; Klima, Theresia; Heinisch, Corinna; Reichlin, Tobias; Potocki, Mihael; Nowak, Albina; Tschung, Christopher; Arenja, Nisha; Bingisser, Roland; Mueller, Christian

    2011-03-01

    We aimed to establish the prevalence and effect of worsening renal function (WRF) on survival among patients with acute decompensated heart failure. Furthermore, we sought to establish a risk score for the prediction of WRF and externally validate the previously established Forman risk score. A total of 657 consecutive patients with acute decompensated heart failure presenting to the emergency department and undergoing serial creatinine measurements were enrolled. The potential of the clinical parameters at admission to predict WRF was assessed as the primary end point. The secondary end point was all-cause mortality at 360 days. Of the 657 patients, 136 (21%) developed WRF, and 220 patients had died during the first year. WRF was more common in the nonsurvivors (30% vs 41%, p = 0.03). Multivariate regression analysis found WRF to independently predict mortality (hazard ratio 1.92, p <0.01). In a single parameter model, previously diagnosed chronic kidney disease was the only independent predictor of WRF and achieved an area under the receiver operating characteristic curve of 0.60. After the inclusion of the blood gas analysis parameters into the model history of chronic kidney disease (hazard ratio 2.13, p = 0.03), outpatient diuretics (hazard ratio 5.75, p <0.01), and bicarbonate (hazard ratio 0.91, p <0.01) were all predictive of WRF. A risk score was developed using these predictors. On receiver operating characteristic curve analysis, the Forman and Basel prediction rules achieved an area under the curve of 0.65 and 0.71, respectively. In conclusion, WRF was common in patients with acute decompensated heart failure and was linked to significantly worse outcomes. However, the clinical parameters failed to adequately predict its occurrence, making a tailored therapy approach impossible. Copyright © 2011 Elsevier Inc. All rights reserved.

  20. Predicting the failure of retrograde ureteral stent insertion for managing malignant ureteral obstruction in outpatients

    PubMed Central

    WANG, JIN-YOU; ZHANG, HAI-LIANG; ZHU, YAO; QIN, XIAO-JIAN; DAI, BO; YE, DING-WEI

    2016-01-01

    Malignant ureteral obstruction (MUO) is an unpropitious sign that is commonly observed in patients with advanced incurable cancer. The present study aimed to evaluate predictive factors for the failure of retrograde ureteral stent insertion in the management of MUO in outpatients. A total of 164 patients with MUO were retrospectively assessed in this study. Clinical factors, including age, gender, type of malignancy, level of obstruction, cause of obstruction, pre-operative creatinine level, degree of hydronephrosis, condition of the contralateral ureter, prior radiotherapy, Eastern Cooperative Oncology Group performance status (ECOG PS), bladder wall invasion and technical failure, were recorded for each case. Univariate and multivariate logistic regression analyses were used to investigate the risk factors for predicting the failure of retrograde ureteral stent insertion. In total, 38 out of 164 patients experienced bilateral obstruction, therefore, a total of 202 ureteral units were available for data analysis. The rate of insertion failure in MUO was 34.65%. Multivariate analyses identified ECOG PS, degree of hydronephrosis and bladder wall invasion as independent predictors for insertion failure. Overall, the present study found that rate of retrograde ureteral stent insertion failure is high in outpatients with MUO, and that ECOG PS, degree of hydronephrosis and bladder invasion are potential independent predictors of insertion failure. PMID:26870299

  1. Acute Unilateral Vestibular Failure Does Not Cause Spatial Hemineglect.

    PubMed

    Conrad, Julian; Habs, Maximilian; Brandt, Thomas; Dieterich, Marianne

    2015-01-01

    Visuo-spatial neglect and vestibular disorders have common clinical findings and involve the same cortical areas. We questioned (1) whether visuo-spatial hemineglect is not only a disorder of spatial attention but may also reflect a disorder of higher cortical vestibular function and (2) whether a vestibular tone imbalance due to an acute peripheral dysfunction can also cause symptoms of neglect or extinction. Therefore, patients with an acute unilateral peripheral vestibular failure (VF) were tested for symptoms of hemineglect. Twenty-eight patients with acute VF were assessed for signs of vestibular deficits and spatial neglect using clinical measures and various common standardized paper-pencil tests. Neglect severity was evaluated further with the Center of Cancellation method. Pathological neglect test scores were correlated with the degree of vestibular dysfunction determined by the subjective visual vertical and caloric testing. Three patients showed isolated pathological scores in one or the other neglect test, either ipsilesionally or contralesionally to the VF. None of the patients fulfilled the diagnostic criteria of spatial hemineglect or extinction. A vestibular tone imbalance due to unilateral failure of the vestibular endorgan does not cause spatial hemineglect, but evidence indicates it causes mild attentional deficits in both visual hemifields.

  2. Acute Unilateral Vestibular Failure Does Not Cause Spatial Hemineglect

    PubMed Central

    Conrad, Julian; Habs, Maximilian; Brandt, Thomas; Dieterich, Marianne

    2015-01-01

    Objectives Visuo-spatial neglect and vestibular disorders have common clinical findings and involve the same cortical areas. We questioned (1) whether visuo-spatial hemineglect is not only a disorder of spatial attention but may also reflect a disorder of higher cortical vestibular function and (2) whether a vestibular tone imbalance due to an acute peripheral dysfunction can also cause symptoms of neglect or extinction. Therefore, patients with an acute unilateral peripheral vestibular failure (VF) were tested for symptoms of hemineglect. Methods Twenty-eight patients with acute VF were assessed for signs of vestibular deficits and spatial neglect using clinical measures and various common standardized paper-pencil tests. Neglect severity was evaluated further with the Center of Cancellation method. Pathological neglect test scores were correlated with the degree of vestibular dysfunction determined by the subjective visual vertical and caloric testing. Results Three patients showed isolated pathological scores in one or the other neglect test, either ipsilesionally or contralesionally to the VF. None of the patients fulfilled the diagnostic criteria of spatial hemineglect or extinction. Conclusions A vestibular tone imbalance due to unilateral failure of the vestibular endorgan does not cause spatial hemineglect, but evidence indicates it causes mild attentional deficits in both visual hemifields. PMID:26247469

  3. Cross-Cultural Blunders in Professional Communication from a Semantic Perspective

    ERIC Educational Resources Information Center

    Zhu, Pinfan

    2010-01-01

    Cross-cultural blunders caused by inappropriate use of language are a common problem in international professional communication. They cause misunderstanding, lead to business failures, and tend to be offensive at times. Such blunders may occur in business ads, slogans, products names, and instructions. Understanding their causes and finding…

  4. Reasons for revision of failed hemiarthroplasty: Are there any differences between unipolar and bipolar?

    PubMed

    Iamthanaporn, Khanin; Chareancholvanich, Keerati; Pornrattanamaneewong, Chaturong

    2018-03-16

    Hemiarthroplasty (HA) is an effective procedure for treatment of femoral neck fracture. However, it is debatable whether unipolar or bipolar HA is the most suitable implant. The purpose of this study was to compare the causes of failure and longevity in both types of HA. We retrospectively reviewed 133 cases that underwent revision surgery of HA between 2002 and 2012. The causes of revision surgery were identified and stratified into early (≤ 5 years) failure and late (> 5 years) failure. Survival analyses were performed for each implant type. The common causes for revision were aseptic loosening (49.6%), infection (22.6%) and acetabular erosion (15.0%). Unipolar and bipolar HA were not different in causes for revision, but the unipolar group had a statistically significantly higher number of acetabular erosion events compared with the bipolar group (p = 0.002). In the early period, 24 unipolar HA (52.9%) and 28 bipolar HA (34.1%) failed. There were no statistically significant differences in the numbers of revised HA in each period between the two groups (p = 0.138). The median survival times in the unipolar and bipolar groups were 84.0 ± 24.5 and 120.0 ± 5.5 months, respectively. However, the survival times of both implants were not statistically significantly different. Aseptic loosening was the most common reason for revision surgery after hemiarthroplasty surgery in early and late failures. Unipolar and bipolar hemiarthroplasty were not different in terms of causes of failure and survivorship except bipolar hemiarthroplasty had many fewer acetabular erosion events.

  5. Approach to Clinical Syndrome of Jaundice and Encephalopathy in Tropics

    PubMed Central

    Anand, Anil C.; Garg, Hitendra K.

    2015-01-01

    A large number of patients present with jaundice and encephalopathy in tropical country like India and acute liver failure is the usual cause. Clinical presentation like ALF is also a complication of many tropical infections, and these conditions may mimic ALF but may have subtle differences from ALF. Moreover, what hepatologists see as acute liver failure in tropics is different from what is commonly described in Western Textbooks. Paracetamol overdose, which is possibly the commonest cause of ALF in UK and USA, is hardly ever seen in India. Most common etiology here is viral hepatitis (hepatitis E > hepatitis B> hepatitis A). Apart from ALF, one may also come across subacute hepatic failure (SAHF) as well as acute-on-chronic liver failure (ACLF) due to viral hepatitis. Interestingly, a host of other conditions can mimic ALF because clinical presentation in these conditions can be dominated by jaundice and encephalopathy. Malarial hepatopathy is possibly the best-known condition out of these and is not an uncommon manifestation of severe malaria. A similar presentation can also be seen in other common infections in tropics such as dengue fever, typhoid fever, leptospirosis, scrub typhus, amoebic liver abscesses, tuberculosis and other bacterial and fungal infections with or without human immunodeficiency virus (HIV) related disease. In many of these conditions, liver failure may not be underlying pathophysiology. Some pregnancy related liver diseases could also present with jaundice and encephalopathy. This review summarizes the commonly seen presentations in tropical country like India, where jaundice and encephalopathy dominate the clinical picture. PMID:26041951

  6. Acute allograft failure in thoracic organ transplantation.

    PubMed

    Jahania, M S; Mullett, T W; Sanchez, J A; Narayan, P; Lasley, R D; Mentzer, R M

    2000-01-01

    Thoracic organ transplantation is an effective form of treatment for end-stage heart and lung disease. Despite major advances in the field, transplant patients remain at risk for acute allograft dysfunction, a major cause of early and late mortality. The most common causes of allograft failure include primary graft failure secondary to inadequate heart and lung preservation during cold storage, cellular rejection, and various donor-recipient-related factors. During cold storage and early reperfusion, heart and lung allografts are vulnerable to intracellular calcium overload, acidosis, cell swelling, injury mediated by reactive oxygen species, and the inflammatory response. Brain death itself is associated with a reduction in myocardial contractility, and recipient-related factors such as preexisting pulmonary hypertension can lead to acute right heart failure and the pulmonary reimplantation response. The development of new methods to prevent or treat these various causes of acute graft failure could lead to a marked improvement in short- and long-term survival of patients undergoing thoracic organ transplantation.

  7. Pharmacological management of chronic heart failure in adults: a review of the literature.

    PubMed

    Auty, Richard

    2004-03-01

    Heart failure is a common, life threatening condition encountered in patients of all ages and in all clinical settings. It may be due to any of a wide variety of causes - in Malawi, cardiomyopathies, hypertension and rheumatic heart disease are probably the commonest causes of heart failure. In more affluent societies, ischaemic heart disease is an important factor. Chronic heart failure (CHF) causes significant morbidity: it reduces exercise capacity, interferes with sleep and produces unsightly and uncomfortable oedema. The syndrome also carries substantial mortatity, worse than that of many malignant tumours: 20 -30% of patients with mild or moderately severe heart failure will die every year if left untreated. The life expectancy of a patient with untreated severe heart failure is only about 6 months. Table 1 explains the symptomatic classification of the severity of heart failure. Objective measurements of cardiac function, such as Left Ventricular Ejection Fraction (LYEF) or chamber filling pressures, correlate poorly with symptoms and New York Heart Association (NYHA) classification. Many of the problems experienced by a patient with heart failure are due to a 'vicious circle' of events in which pathophysiological responses to the falling cardiac output cause further deterioration in cardiac function over time. These responses include ventricular remodeling, neurohumoural activation (increased sympathetic activity; increased atrial natriuretic peptide; increased angiotensin II), increased activity of the renin-angiotensin-aldosterone system (RAAS) causing fluid retention, vasoconstriction and sodium retention. [Table: see text].

  8. Diverse Redundant Systems for Reliable Space Life Support

    NASA Technical Reports Server (NTRS)

    Jones, Harry W.

    2015-01-01

    Reliable life support systems are required for deep space missions. The probability of a fatal life support failure should be less than one in a thousand in a multi-year mission. It is far too expensive to develop a single system with such high reliability. Using three redundant units would require only that each have a failure probability of one in ten over the mission. Since the system development cost is inverse to the failure probability, this would cut cost by a factor of one hundred. Using replaceable subsystems instead of full systems would further cut cost. Using full sets of replaceable components improves reliability more than using complete systems as spares, since a set of components could repair many different failures instead of just one. Replaceable components would require more tools, space, and planning than full systems or replaceable subsystems. However, identical system redundancy cannot be relied on in practice. Common cause failures can disable all the identical redundant systems. Typical levels of common cause failures will defeat redundancy greater than two. Diverse redundant systems are required for reliable space life support. Three, four, or five diverse redundant systems could be needed for sufficient reliability. One system with lower level repair could be substituted for two diverse systems to save cost.

  9. Implementation and Qualifications Lessons Learned for Space Flight Photonic Components

    NASA Technical Reports Server (NTRS)

    Ott, Melanie N.

    2010-01-01

    This slide presentation reviews the process for implementation and qualification of space flight photonic components. It discusses the causes for most common anomalies for the space flight components, design compatibility, a specific failure analysis of optical fiber that occurred in a cable in 1999-2000, and another ExPCA connector anomaly involving pins that broke off. It reviews issues around material selection, quality processes and documentation, and current projects that the Photonics group is involved in. The importance of good documentation is stressed.

  10. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sattison, M.B.; Blackman, H.S.; Novack, S.D.

    The Office for Analysis and Evaluation of Operational Data (AEOD) has sought the assistance of the Idaho National Engineering Laboratory (INEL) to make some significant enhancements to the SAPHIRE-based Accident Sequence Precursor (ASP) models recently developed by the INEL. The challenge of this project is to provide the features of a full-scale PRA within the framework of the simplified ASP models. Some of these features include: (1) uncertainty analysis addressing the standard PRA uncertainties and the uncertainties unique to the ASP models and methods, (2) incorporation and proper quantification of individual human actions and the interaction among human actions, (3)more » enhanced treatment of common cause failures, and (4) extension of the ASP models to more closely mimic full-scale PRAs (inclusion of more initiators, explicitly modeling support system failures, etc.). This paper provides an overview of the methods being used to make the above improvements.« less

  11. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sattison, M.B.; Blackman, H.S.; Novack, S.D.

    The Office for Analysis and Evaluation of Operational Data (AEOD) has sought the assistance of the Idaho National Engineering Laboratory (INEL) to make some significant enhancements to the SAPHIRE-based Accident Sequence Precursor (ASP) models recently developed by the INEL. The challenge of this project is to provide the features of a full-scale PRA within the framework of the simplified ASP models. Some of these features include: (1) uncertainty analysis addressing the standard PRA uncertainties and the uncertainties unique to the ASP models and methodology, (2) incorporation and proper quantification of individual human actions and the interaction among human actions, (3)more » enhanced treatment of common cause failures, and (4) extension of the ASP models to more closely mimic full-scale PRAs (inclusion of more initiators, explicitly modeling support system failures, etc.). This paper provides an overview of the methods being used to make the above improvements.« less

  12. Design and Control of Small Neutral Beam Arc Chamber for Investigations of DIII-D Neutral Beam Failure During Helium Operation

    NASA Astrophysics Data System (ADS)

    Fremlin, Carl; Beckers, Jasper; Crowley, Brendan; Rauch, Joseph; Scoville, Jim

    2017-10-01

    The Neutral Beam system on the DIII-D tokamak consists of eight ion sources using the Common Long Pulse Source (CLPS) design. During helium operation, desired for research regarding the ITER pre-nuclear phase, it has been observed that the ion source arc chamber performance steadily deteriorates, eventually failing due to electrical breakdown of the insulation. A significant investment of manpower and time is required for repairs. To study the cause of failure a small analogue of the DIII-D neutral beam arc chamber has been constructed. This poster presents the design and analysis of the arc chamber including the PLC based operational control system for the experiment, analysis of the magnetic confinement and details of the diagnostic suite. Work supported in part by US DoE under the Science Undergraduate Laboratory Internship (SULI) program and under DE-FC02-04ER54698.

  13. Analysis of rural intersection accidents caused by stop sign violation and failure to yield the right-of-way

    DOT National Transportation Integrated Search

    2000-09-01

    The objectives of this study were to (1) identify the factors that contribute to accidents caused by failure to stop and failure to yield the right-of-way at rural two-way stop-controlled intersections on the state highway system, and (2) determine w...

  14. Acute liver failure in neonates with undiagnosed hereditary fructose intolerance due to exposure from widely available infant formulas.

    PubMed

    Li, Hong; Byers, Heather M; Diaz-Kuan, Alicia; Vos, Miriam B; Hall, Patricia L; Tortorelli, Silvia; Singh, Rani; Wallenstein, Matthew B; Allain, Meredith; Dimmock, David P; Farrell, Ryan M; McCandless, Shawn; Gambello, Michael J

    2018-04-01

    Hereditary fructose intolerance (HFI) is an autosomal recessive disorder caused by aldolase B (ALDOB) deficiency resulting in an inability to metabolize fructose. The toxic accumulation of intermediate fructose-1-phosphate causes multiple metabolic disturbances, including postprandial hypoglycemia, lactic acidosis, electrolyte disturbance, and liver/kidney dysfunction. The clinical presentation varies depending on the age of exposure and the load of fructose. Some common infant formulas contain fructose in various forms, such as sucrose, a disaccharide of fructose and glucose. Exposure to formula containing fructogenic compounds is an important, but often overlooked trigger for severe metabolic disturbances in HFI. Here we report four neonates with undiagnosed HFI, all caused by the common, homozygous mutation c.448G>C (p.A150P) in ALDOB, who developed life-threatening acute liver failure due to fructose-containing formulas. These cases underscore the importance of dietary history and consideration of HFI in cases of neonatal or infantile acute liver failure for prompt diagnosis and treatment of HFI. Copyright © 2018 Elsevier Inc. All rights reserved.

  15. Probabilistic analysis on the failure of reactivity control for the PWR

    NASA Astrophysics Data System (ADS)

    Sony Tjahyani, D. T.; Deswandri; Sunaryo, G. R.

    2018-02-01

    The fundamental safety function of the power reactor is to control reactivity, to remove heat from the reactor, and to confine radioactive material. The safety analysis is used to ensure that each parameter is fulfilled during the design and is done by deterministic and probabilistic method. The analysis of reactivity control is important to be done because it will affect the other of fundamental safety functions. The purpose of this research is to determine the failure probability of the reactivity control and its failure contribution on a PWR design. The analysis is carried out by determining intermediate events, which cause the failure of reactivity control. Furthermore, the basic event is determined by deductive method using the fault tree analysis. The AP1000 is used as the object of research. The probability data of component failure or human error, which is used in the analysis, is collected from IAEA, Westinghouse, NRC and other published documents. The results show that there are six intermediate events, which can cause the failure of the reactivity control. These intermediate events are uncontrolled rod bank withdrawal at low power or full power, malfunction of boron dilution, misalignment of control rod withdrawal, malfunction of improper position of fuel assembly and ejection of control rod. The failure probability of reactivity control is 1.49E-03 per year. The causes of failures which are affected by human factor are boron dilution, misalignment of control rod withdrawal and malfunction of improper position for fuel assembly. Based on the assessment, it is concluded that the failure probability of reactivity control on the PWR is still within the IAEA criteria.

  16. Tiger in the fault tree jungle

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rubel, P.

    1976-01-01

    There is yet little evidence of serious efforts to apply formal reliability analysis methods to evaluate, or even to identify, potential common-mode failures (CMF) of reactor safeguard systems. The prospects for event logic modeling in this regard are examined by the primitive device of reviewing actual CMF experience in terms of what the analyst might have perceived a priori. Further insights of the probability and risks aspects of CMFs are sought through consideration of three key likelihood factors: (1) prior probability of cause ever existing, (2) opportunities for removing cause, and (3) probability that a CMF cause will be activatedmore » by conditions associated with a real system challenge. It was concluded that the principal needs for formal logical discipline in the endeavor to decrease CMF-related risks are to discover and to account for strong ''energetic'' dependency couplings that could arise in the major accidents usually classed as ''hypothetical.'' This application would help focus research, design and quality assurance efforts to cope with major CMF causes. But without extraordinary challenges to the reactor safeguard systems, there must continue to be virtually no statistical evidence pertinent to that class of failure dependencies.« less

  17. Broken rims in railroad wheels.

    DOT National Transportation Integrated Search

    2014-12-01

    Broken wheels are one of the most common types of equipment-caused train accidents. The failure of rail car wheel rims, which : are usually the result of shattered rims or vertical split rims (VSR), are the leading cause of wheel-related accidents, a...

  18. Poison hemlock-induced respiratory failure in a toddler.

    PubMed

    West, Patrick L; Horowitz, B Zane; Montanaro, Marc T; Lindsay, James N

    2009-11-01

    The ingestion of poison hemlock, or Conium maculatum, is described in a 2-year-old boy. He had the onset of abdominal pain and weakness after being fed C. maculatum picked by his sister from the roadside 2 hours earlier. He had a rapidly progressive muscular weakness and was intubated for respiratory failure. His symptoms completely resolved within 24 hours of the ingestion. Conium maculatum is a common weed that causes toxicity by its primary toxin, coniine, which stimulates nicotinic receptors and causes a syndrome of rapidly progressive muscle weakness and paralysis. We describe the course of a benign-appearing plant ingestion resulting in respiratory failure.

  19. Heart failure and atrial fibrillation: current concepts and controversies.

    PubMed Central

    Van den Berg, M. P.; Tuinenburg, A. E.; Crijns, H. J.; Van Gelder, I. C.; Gosselink, A. T.; Lie, K. I.

    1997-01-01

    Heart failure and atrial fibrillation are very common, particularly in the elderly. Owing to common risk factors both disorders are often present in the same patient. In addition, there is increasing evidence of a complex, reciprocal relation between heart failure and atrial fibrillation. Thus heart failure may cause atrial fibrillation, with electromechanical feedback and neurohumoral activation playing an important mediating role. In addition, atrial fibrillation may promote heart failure; in particular, when there is an uncontrolled ventricular rate, tachycardiomyopathy may develop and thereby heart failure. Eventually, a vicious circle between heart failure and atrial fibrillation may form, in which neurohumoral activation and subtle derangement of rate control are involved. Treatment should aim at unloading of the heart, adequate control of ventricular rate, and correction of neurohumoral activation. Angiotensin converting enzyme inhibitors may help to achieve these goals. Treatment should also include an attempt to restore sinus rhythm through electrical cardioversion, though appropriate timing of cardioversion is difficult. His bundle ablation may be used to achieve adequate rate control in drug refractory cases. PMID:9155607

  20. Optimal Near-Hitless Network Failure Recovery Using Diversity Coding

    ERIC Educational Resources Information Center

    Avci, Serhat Nazim

    2013-01-01

    Link failures in wide area networks are common and cause significant data losses. Mesh-based protection schemes offer high capacity efficiency but they are slow, require complex signaling, and instable. Diversity coding is a proactive coding-based recovery technique which offers near-hitless (sub-ms) restoration with a competitive spare capacity…

  1. Introducing the Human Side of Total Quality Management into Educational Institutions.

    ERIC Educational Resources Information Center

    Thor, Linda M.

    1994-01-01

    Drawing from the experiences of Rio Salado Community College (Arizona) in implementing Total Quality Management, discusses common barriers to change (e.g., time, aversion to change, and pitfalls of change); leadership failure as a cause of failure in TQM implementation; and the importance of constancy of purpose, employee empowerment, and…

  2. Fluid and electrolyte disturbances in cirrhosis.

    PubMed

    Papper, S

    1976-01-01

    Glomerular filtration rate and renal plasma flow may be normal, reduced or increased in cirrhosis. The mechanism of departures from normal is not known. Other renal functional changes in cirrhosis include avid sodium reabsorption, impaired concentrating and diluting abilities, and partial renal tubular acidosis. Fluid and electrolyte disorders are common. Sodium retention with edema and ascites should generally be treated conservatively because they tend to disappear as the liver heals and because forced diuresis has hazards. The indications for diuretics are (1) incipient or overt atelectasis; (2) abdominal distress; and (3) possibility of skin breakdown. Hyponatremia is common and its mechanism and treatment must be assessed in each patient. Hypokalemia occurs and requires treatment. Respiratory alkalosis and renal tubular acidosis seldom need therapy. The hepatorenal syndrome is defined as functional renal failure in the absence of other known causes of renal functional impairment. The prognosis is terrible and therapy is unsatisfactory. The best approach is not to equate the occurrence of renal failure in cirrhosis with the hepatorenal syndrome. Rather the physician should first explore all treatable causes of renal failure, eg, dehydration, obstruction, infection, heart failure, potassium depletion, and others.

  3. The pathophysiology of heart failure.

    PubMed

    Kemp, Clinton D; Conte, John V

    2012-01-01

    Heart failure is a clinical syndrome that results when the heart is unable to provide sufficient blood flow to meet metabolic requirements or accommodate systemic venous return. This common condition affects over 5 million people in the United States at a cost of $10-38 billion per year. Heart failure results from injury to the myocardium from a variety of causes including ischemic heart disease, hypertension, and diabetes. Less common etiologies include cardiomyopathies, valvular disease, myocarditis, infections, systemic toxins, and cardiotoxic drugs. As the heart fails, patients develop symptoms which include dyspnea from pulmonary congestion, and peripheral edema and ascites from impaired venous return. Constitutional symptoms such as nausea, lack of appetite, and fatigue are also common. There are several compensatory mechanisms that occur as the failing heart attempts to maintain adequate function. These include increasing cardiac output via the Frank-Starling mechanism, increasing ventricular volume and wall thickness through ventricular remodeling, and maintaining tissue perfusion with augmented mean arterial pressure through activation of neurohormonal systems. Although initially beneficial in the early stages of heart failure, all of these compensatory mechanisms eventually lead to a vicious cycle of worsening heart failure. Treatment strategies have been developed based upon the understanding of these compensatory mechanisms. Medical therapy includes diuresis, suppression of the overactive neurohormonal systems, and augmentation of contractility. Surgical options include ventricular resynchronization therapy, surgical ventricular remodeling, ventricular assist device implantation, and heart transplantation. Despite significant understanding of the underlying pathophysiological mechanisms in heart failure, this disease causes significant morbidity and carries a 50% 5-year mortality. Copyright © 2012 Elsevier Inc. All rights reserved.

  4. Progressive Failure Analysis Methodology for Laminated Composite Structures

    NASA Technical Reports Server (NTRS)

    Sleight, David W.

    1999-01-01

    A progressive failure analysis method has been developed for predicting the failure of laminated composite structures under geometrically nonlinear deformations. The progressive failure analysis uses C(exp 1) shell elements based on classical lamination theory to calculate the in-plane stresses. Several failure criteria, including the maximum strain criterion, Hashin's criterion, and Christensen's criterion, are used to predict the failure mechanisms and several options are available to degrade the material properties after failures. The progressive failure analysis method is implemented in the COMET finite element analysis code and can predict the damage and response of laminated composite structures from initial loading to final failure. The different failure criteria and material degradation methods are compared and assessed by performing analyses of several laminated composite structures. Results from the progressive failure method indicate good correlation with the existing test data except in structural applications where interlaminar stresses are important which may cause failure mechanisms such as debonding or delaminations.

  5. Temporal Lobe Epilepsy Surgery Failures: A Review

    PubMed Central

    Harroud, Adil; Bouthillier, Alain; Weil, Alexander G.; Nguyen, Dang Khoa

    2012-01-01

    Patients with temporal lobe epilepsy (TLE) are refractory to antiepileptic drugs in about 30% of cases. Surgical treatment has been shown to be beneficial for the selected patients but fails to provide a seizure-free outcome in 20–30% of TLE patients. Several reasons have been identified to explain these surgical failures. This paper will address the five most common causes of TLE surgery failure (a) insufficient resection of epileptogenic mesial temporal structures, (b) relapse on the contralateral mesial temporal lobe, (c) lateral temporal neocortical epilepsy, (d) coexistence of mesial temporal sclerosis and a neocortical lesion (dual pathology); and (e) extratemporal lobe epilepsy mimicking TLE or temporal plus epilepsy. Persistence of epileptogenic mesial structures in the posterior temporal region and failure to distinguish mesial and lateral temporal epilepsy are possible causes of seizure persistence after TLE surgery. In cases of dual pathology, failure to identify a subtle mesial temporal sclerosis or regions of cortical microdysgenesis is a likely explanation for some surgical failures. Extratemporal epilepsy syndromes masquerading as or coexistent with TLE result in incomplete resection of the epileptogenic zone and seizure relapse after surgery. In particular, the insula may be an important cause of surgical failure in patients with TLE. PMID:22934162

  6. Analysis of strain gage reliability in F-100 jet engine testing at NASA Lewis Research Center

    NASA Technical Reports Server (NTRS)

    Holanda, R.

    1983-01-01

    A reliability analysis was performed on 64 strain gage systems mounted on the 3 rotor stages of the fan of a YF-100 engine. The strain gages were used in a 65 hour fan flutter research program which included about 5 hours of blade flutter. The analysis was part of a reliability improvement program. Eighty-four percent of the strain gages survived the test and performed satisfactorily. A post test analysis determined most failure causes. Five failures were caused by open circuits, three failed gages showed elevated circuit resistance, and one gage circuit was grounded. One failure was undetermined.

  7. Accelerated graft dysfunction in heart transplant patients with persistent atrioventricular conduction block.

    PubMed

    Lee, William; Tay, Andre; Walker, Bruce D; Kuchar, Dennis L; Hayward, Christopher S; Spratt, Phillip; Subbiah, Rajesh N

    2016-12-01

    Bradyarrhythmia following heart transplantation is common-∼7.5-24% of patients require permanent pacemaker (PPM) implantation. While overall mortality is similar to their non-paced counterparts, the effects of chronic right ventricular pacing (CRVP) in heart transplant patients have not been studied. We aim to examine the effects of CRVP on heart failure and mortality in heart transplant patients. Records of heart transplant recipients requiring PPM at St Vincent's Hospital, Sydney, Australia between January 1990 and January 2015 were examined. Patient's without a right ventricular (RV) pacing lead or a follow-up time of <1 year were excluded. Patients with pre-existing abnormal left ventricular function (<50%) were analysed separately. Patients were grouped by pacing dependence (100% pacing dependent vs. non-pacing dependent). The primary endpoint was clinical or echocardiographic heart failure (<35%) in the first 5 years post-PPM. Thirty-three of 709 heart transplant recipients were studied. Two patients had complete RV pacing dependence, and the remaining 31 patients had varying degrees of pacing requirement, with an underlying ventricular escape rhythm. The primary endpoint occurred significantly more in the pacing-dependent group; 2 (100%) compared with 2 (6%) of the non pacing dependent group (P < 0.0001 by log-rank analysis, HR = 24.58). Non-pacing-dependent patients had reversible causes for heart failure, unrelated to pacing. In comparison, there was no other cause of heart failure in the pacing-dependent group. Permanent atrioventricular block is rare in the heart transplant population. We have demonstrated CRVP as a potential cause of accelerated graft failure in pacing-dependent heart transplant patients. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2016. For permissions please email: journals.permissions@oup.com.

  8. Decompensated Heart Failure in Pregnancy

    PubMed Central

    Anthony, John

    2016-01-01

    Heart disease is a common cause of morbidity and mortality during pregnancy. Symptoms and signs of heart failure in a pregnant woman are an indication for urgent assessment to establish a diagnosis and appropriate management. This is best accomplished through a multidisciplinary approach in which both cardiologists and obstetricians need to participate in order to provide expert counselling and care in pursuit of safe motherhood. Congenital heart disease, although common, once corrected is an unusual source of complications, which are more likely to develop as a consequence of ventricular failure, pulmonary hypertension and aortic arch disease. Rheumatic valvular heart disease is a challenge because of the need for anticoagulation during pregnancy and the risk of sepsis associated with childbirth. This review outlines a contemporary approach to heart failure presenting during pregnancy. PMID:28785449

  9. Patterns of technical error among surgical malpractice claims: an analysis of strategies to prevent injury to surgical patients.

    PubMed

    Regenbogen, Scott E; Greenberg, Caprice C; Studdert, David M; Lipsitz, Stuart R; Zinner, Michael J; Gawande, Atul A

    2007-11-01

    To identify the most prevalent patterns of technical errors in surgery, and evaluate commonly recommended interventions in light of these patterns. The majority of surgical adverse events involve technical errors, but little is known about the nature and causes of these events. We examined characteristics of technical errors and common contributing factors among closed surgical malpractice claims. Surgeon reviewers analyzed 444 randomly sampled surgical malpractice claims from four liability insurers. Among 258 claims in which injuries due to error were detected, 52% (n = 133) involved technical errors. These technical errors were further analyzed with a structured review instrument designed by qualitative content analysis. Forty-nine percent of the technical errors caused permanent disability; an additional 16% resulted in death. Two-thirds (65%) of the technical errors were linked to manual error, 9% to errors in judgment, and 26% to both manual and judgment error. A minority of technical errors involved advanced procedures requiring special training ("index operations"; 16%), surgeons inexperienced with the task (14%), or poorly supervised residents (9%). The majority involved experienced surgeons (73%), and occurred in routine, rather than index, operations (84%). Patient-related complexities-including emergencies, difficult or unexpected anatomy, and previous surgery-contributed to 61% of technical errors, and technology or systems failures contributed to 21%. Most technical errors occur in routine operations with experienced surgeons, under conditions of increased patient complexity or systems failure. Commonly recommended interventions, including restricting high-complexity operations to experienced surgeons, additional training for inexperienced surgeons, and stricter supervision of trainees, are likely to address only a minority of technical errors. Surgical safety research should instead focus on improving decision-making and performance in routine operations for complex patients and circumstances.

  10. Current issues in implementing do-not-resuscitate orders for cardiac patients.

    PubMed

    Ruiz-García, J; Canal-Fontcuberta, I; Martínez-Sellés, M

    2017-05-01

    Cardiovascular diseases are still the most common cause of death, and heart failure is the most common reason for hospitalization of patients older than 65 years. However, Cardiology attributes low importance to end-of-life care. Cardiac patients' perception of their disease's prognosis and the results of cardiopulmonary resuscitation differ greatly from reality. The "do not resuscitate" order allows patients to pre-emptively express their rejection for cardiopulmonary resuscitation, thereby avoiding its potentially negative consequences. However, these orders are still underused and misinterpreted in cardiac patients. Most of these patients usually have no opportunity to have the necessary conversations with their attending physician on their resuscitation preferences. In this review, we performed an analysis of the causes that could explain this situation. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Medicina Interna (SEMI). All rights reserved.

  11. [Differential diagnosis of hypercalcemia--a retrospective study of 46 dogs].

    PubMed

    Uehlinger, P; Glaus, T; Hauser, B; Reusch, C

    1998-01-01

    The case records of 46 dogs with hypercalcemia were studied retrospectively. The most common cause of hypercalcemia was malignancy, of which the majority were diagnosed as having lymphosarcoma (LSA, n = 23). Interestingly only 15 had palpable lymphadenopathy. Other neoplasia were apocrine adenocarcinoma of the anal sac (n = 4), mammary adenocarcinoma (n = 2), anaplastic carcinoma (n = 1), and malignant histiocytosis (n = 1). Non-neoplastic reasons for hypercalcemia were hypoadrenocorticism (n = 5), acute renal failure (n = 2), chronic renal failure (n = 2), hypervitaminosis D (n = 1), and primary hyperparathyroidism (n = 1). In 4 cases no definitive diagnosis could be obtained. Moderate to marked hyperphosphatemia and azotemia was found in all dogs with primary renal failure and in 4 of 5 dogs with hypoadrenocorticism. In contrast only 4 of 31 dogs with neoplasia showed (mild) hyperphosphatemia and 20 showed mild to moderate azotemia. Elevated PTH levels were found in dogs with primary chronic renal failure and with primary hyperparathyroidism, but also in one dog with neoplasia. Low PTH concentrations were measured in the dog with hypervitaminosis D and in 8 cases with neoplasia. Additional three cases with neoplasia had values in the reference range. 1. The most common cause of hypercalcemia is LSA. Absence of palpable lymphadenopathy does not exclude LSA and further diagnostic steps may be necessary 2. The combination of moderate to marked hyperphosphatemia suggests primary renal failure or hypoadrenocorticism. 3. An elevated PTH level is consistent with primary hyperparathyroidism, but does not exclude other causes of hypercalcemia.

  12. Causes of corneal graft failure in India.

    PubMed

    Dandona, L; Naduvilath, T J; Janarthanan, M; Rao, G N

    1998-09-01

    The success of corneal grafting in visual rehabilitation of the corneal blind in India depends on survival of the grafts. Understanding the causes of graft failure may help reduce the risk of failure. We studied these causes in a series of 638 graft failures at our institution. Multivariate logistic regression analysis was used to evaluate the association of particular causes of graft failure with indications for grafting, socioeconomic status, age, sex, host corneal vascularization, donor corneal quality, and experience of surgeon. The major causes of graft failure were allograft rejection (29.2%), increased intraocular pressure (16.9%), infection excluding endophthalmitis (15.4%), and surface problems (12.7%). The odds of infection causing graft failure were significantly higher in patients of lower socioeconomic status (odds ratio 2.45, 95% CI 1.45-4.15). Surface problems as a cause of graft failure was significantly associated with grafts done for corneal scarring or for regrafts (odds ratio 3.36, 95% CI 1.80-6.30). Increased intraocular pressure as a cause of graft failure had significant association with grafts done for aphakic or pseudophakic bullous keratopathy, congenital conditions or glaucoma, or regrafts (odds ratio 2.19, 95% CI 1.25-3.84). Corneal dystrophy was the indication for grafting in 12 of the 13 cases of graft failure due to recurrence of host disease. Surface problems, increased intraocular pressure, and infection are modifiable risk factors that are more likely to cause graft failure in certain categories of patients in India. Knowledge about these associations can be helpful in looking for and aggressively treating these modifiable risk factors in the at-risk categories of corneal graft patients. This can possibly reduce the chance of graft failure.

  13. Academic-Community Hospital Comparison of Vulnerabilities in Door-to-Needle Process for Acute Ischemic Stroke.

    PubMed

    Prabhakaran, Shyam; Khorzad, Rebeca; Brown, Alexandra; Nannicelli, Anna P; Khare, Rahul; Holl, Jane L

    2015-10-01

    Although best practices have been developed for achieving door-to-needle (DTN) times ≤60 minutes for stroke thrombolysis, critical DTN process failures persist. We sought to compare these failures in the Emergency Department at an academic medical center and a community hospital. Failure modes effects and criticality analysis was used to identify system and process failures. Multidisciplinary teams involved in DTN care participated in moderated sessions at each site. As a result, DTN process maps were created and potential failures and their causes, frequency, severity, and existing safeguards were identified. For each failure, a risk priority number and criticality score were calculated; failures were then ranked, with the highest scores representing the most critical failures and targets for intervention. We detected a total of 70 failures in 50 process steps and 76 failures in 42 process steps at the community hospital and academic medical center, respectively. At the community hospital, critical failures included (1) delay in registration because of Emergency Department overcrowding, (2) incorrect triage diagnosis among walk-in patients, and (3) delay in obtaining consent for thrombolytic treatment. At the academic medical center, critical failures included (1) incorrect triage diagnosis among walk-in patients, (2) delay in stroke team activation, and (3) delay in obtaining computed tomographic imaging. Although the identification of common critical failures suggests opportunities for a generalizable process redesign, differences in the criticality and nature of failures must be addressed at the individual hospital level, to develop robust and sustainable solutions to reduce DTN time. © 2015 American Heart Association, Inc.

  14. A Case Study on Improving Intensive Care Unit (ICU) Services Reliability: By Using Process Failure Mode and Effects Analysis (PFMEA)

    PubMed Central

    Yousefinezhadi, Taraneh; Jannesar Nobari, Farnaz Attar; Goodari, Faranak Behzadi; Arab, Mohammad

    2016-01-01

    Introduction: In any complex human system, human error is inevitable and shows that can’t be eliminated by blaming wrong doers. So with the aim of improving Intensive Care Units (ICU) reliability in hospitals, this research tries to identify and analyze ICU’s process failure modes at the point of systematic approach to errors. Methods: In this descriptive research, data was gathered qualitatively by observations, document reviews, and Focus Group Discussions (FGDs) with the process owners in two selected ICUs in Tehran in 2014. But, data analysis was quantitative, based on failures’ Risk Priority Number (RPN) at the base of Failure Modes and Effects Analysis (FMEA) method used. Besides, some causes of failures were analyzed by qualitative Eindhoven Classification Model (ECM). Results: Through FMEA methodology, 378 potential failure modes from 180 ICU activities in hospital A and 184 potential failures from 99 ICU activities in hospital B were identified and evaluated. Then with 90% reliability (RPN≥100), totally 18 failures in hospital A and 42 ones in hospital B were identified as non-acceptable risks and then their causes were analyzed by ECM. Conclusions: Applying of modified PFMEA for improving two selected ICUs’ processes reliability in two different kinds of hospitals shows that this method empowers staff to identify, evaluate, prioritize and analyze all potential failure modes and also make them eager to identify their causes, recommend corrective actions and even participate in improving process without feeling blamed by top management. Moreover, by combining FMEA and ECM, team members can easily identify failure causes at the point of health care perspectives. PMID:27157162

  15. Occupational risk assessment in the construction industry in Iran.

    PubMed

    Seifi Azad Mard, Hamid Reza; Estiri, Ali; Hadadi, Parinaz; Seifi Azad Mard, Mahshid

    2017-12-01

    Occupational accidents in the construction industry are more common compared with other fields and these accidents are more severe compared with the global average in developing countries, especially in Iran. Studies which lead to the source of these accidents and suggest solutions for them are therefore valuable. In this study a combination of the failure mode and effects analysis method and fuzzy theory is used as a semi-qualitative-quantitative method for analyzing risks and failure modes. The main causes of occupational accidents in this field were identified and analyzed based on three factors; severity, detection and occurrence. Based on whether the risks are high or low priority, modifying actions were suggested to reduce the occupational risks. Finally, the results showed that high priority risks had a 40% decrease due to these actions.

  16. [Brain oedema and acute liver failure].

    PubMed

    Spahr, L

    2003-04-01

    Brain oedema leading to intracranial hypertension occurs in a significant proportion of patients with acute liver failure in whom it is a leading cause of death. Although precise pathogenic mechanisms associated to this severe complication remain incompletely understood, increasing evidence points to gut-derived neurotoxins including ammonia as key mediators in cerebral osmotic and perfusion disturbances. The management of brain oedema and intracranial hypertension requires a multidisciplinar approach in a center where liver transplantation is available, as this option is the only treatment modality that provides improvement in outcome. This article reviews the most common causes of acute liver failure and the standard of supportive care management, and describes future potential therapeutic aspects of brain oedema and intracranial hypertension.

  17. Debonding Stress Concentrations in a Pressurized Lobed Sandwich-Walled Generic Cryogenic Tank

    NASA Technical Reports Server (NTRS)

    Ko, William L.

    2004-01-01

    A finite-element stress analysis has been conducted on a lobed composite sandwich tank subjected to internal pressure and cryogenic cooling. The lobed geometry consists of two obtuse circular walls joined together with a common flat wall. Under internal pressure and cryogenic cooling, this type of lobed tank wall will experience open-mode (a process in which the honeycomb is stretched in the depth direction) and shear stress concentrations at the junctures where curved wall changes into flat wall (known as a curve-flat juncture). Open-mode and shear stress concentrations occur in the honeycomb core at the curve-flat junctures and could cause debonding failure. The levels of contributions from internal pressure and temperature loading to the open-mode and shear debonding failure are compared. The lobed fuel tank with honeycomb sandwich walls has been found to be a structurally unsound geometry because of very low debonding failure strengths. The debonding failure problem could be eliminated if the honeycomb core at the curve-flat juncture is replaced with a solid core.

  18. [Surgical treatment of intraoperative injuries and cicatricial strictures of extrahepatic bile ducts].

    PubMed

    Tret'iakov, A A; Slepykh, N I; Kornilov, A K; Karimov, Z Kh

    1998-01-01

    The analysis of 70 cases of surgical treatment for intraoperative injuries and cicatricial strictures of extrahepatic bile ducts was carried out. In 25 patients surgical procedure was restorative and in 45--reconstructiver. Most common causes of corrective operations were: iatrogenic injuries of extrahepatic bile ducts (14) and cicatricial strictures of hepaticocholedochal duct due to intraoperative trauma (31). The problems of operative technique in performing biliobilio-, hepato-hepatico and hepatico-jejuno-anastomoses are considered. There were three deaths in the early postoperative period: 2 patients died of hepatic failure, pyogenic cholangiogenic intoxication caused by cholangioectasies and intrahepatic abscesses, and 1-due to generalyzed peritonitis caused by acute gastric ulcer perforation. Special attention is paid to the choice of the method of prolonged drainage used in reconstructive as well as in restorative operations.

  19. Heart Failure in Sub-Saharan Africa

    PubMed Central

    Bloomfield, Gerald S; Barasa, Felix A; Doll, Jacob A; Velazquez, Eric J

    2013-01-01

    The heart failure syndrome has been recognized as a significant contributor to cardiovascular disease burden in sub-Saharan African for many decades. Seminal knowledge regarding heart failure in the region came from case reports and case series of the early 20th century which identified infectious, nutritional and idiopathic causes as the most common. With increasing urbanization, changes in lifestyle habits, and ageing of the population, the spectrum of causes of HF has also expanded resulting in a significant burden of both communicable and non-communicable etiologies. Heart failure in sub-Saharan Africa is notable for the range of etiologies that concurrently exist as well as the healthcare environment marked by limited resources, weak national healthcare systems and a paucity of national level data on disease trends. With the recent publication of the first and largest multinational prospective registry of acute heart failure in sub-Saharan Africa, it is timely to review the state of knowledge to date and describe the myriad forms of heart failure in the region. This review discusses several forms of heart failure that are common in sub-Saharan Africa (e.g., rheumatic heart disease, hypertensive heart disease, pericardial disease, various dilated cardiomyopathies, HIV cardiomyopathy, hypertrophic cardiomyopathy, endomyocardial fibrosis, ischemic heart disease, cor pulmonale) and presents each form with regard to epidemiology, natural history, clinical characteristics, diagnostic considerations and therapies. Areas and approaches to fill the remaining gaps in knowledge are also offered herein highlighting the need for research that is driven by regional disease burden and needs. PMID:23597299

  20. [Obesity and the prognosis of heart failure: the obesity paradox, myth or reality?].

    PubMed

    Bounhoure, Jean-Paul; Galinier, Michel; Roncalli, Jerôme; Massabuau, Pierre

    2014-01-01

    Obesity has now reached epidemic proportions worldwide. Obesity is associated with numerous comorbidities, including hypertension, lipid disorders and type II diabetes, and is also a major cause of cardiovascular disease, coronary disease, heart failure, atrial fibrillation, and sudden death. Obesity is the main cause of heart failure in respectively 11% and 14% of cases in men and women. The Framingham study showed that, after correction for other risk factors, each point increase in the body mass index raises the risk of heart failure by 5% in men and 7% in women. Obesity increases the heart workload, causes left ventricular hypertrophy, and impairs both diastolic and systolic function. The most common form of heart failure is diastolic dysfunction, and heart failure in obese individuals is associated with preserved systolic function. Despite these comorbidities and the severity of heart failure, numerous studies have revealed an "obesity paradox" in which overweight and obese individuals with heart failure appear to have a better prognosis than non overweight subjects. This review summarizes the adverse cardiac effects of this nutritional disease, the results of some studies supporting the obesity paradox, the better survival rate of obese patients with heart failure. Potential explanations for these surprising data include the possibility that a number of obese patients may simply not have heart failure, as well as methodological bias, and protective effects of adipose tissue. Further studies of large populations are needed to determine how obesity may improve the prognosis of heart failure.

  1. An Attributional Theory of Achievement Motivation and Emotion.

    ERIC Educational Resources Information Center

    Weiner, Bernard

    1985-01-01

    This article advances an attributional theory of motivation and emotion, with achievement strivings as the theoretical focus. Causes of success and failure share three common properties: locus, stability, and controllability. Stability of causes influences changes in expectancy of success. Expectancy and affect guide motivated behavior.…

  2. Biallelic Mutations in NBAS Cause Recurrent Acute Liver Failure with Onset in Infancy.

    PubMed

    Haack, Tobias B; Staufner, Christian; Köpke, Marlies G; Straub, Beate K; Kölker, Stefan; Thiel, Christian; Freisinger, Peter; Baric, Ivo; McKiernan, Patrick J; Dikow, Nicola; Harting, Inga; Beisse, Flemming; Burgard, Peter; Kotzaeridou, Urania; Kühr, Joachim; Himbert, Urban; Taylor, Robert W; Distelmaier, Felix; Vockley, Jerry; Ghaloul-Gonzalez, Lina; Zschocke, Johannes; Kremer, Laura S; Graf, Elisabeth; Schwarzmayr, Thomas; Bader, Daniel M; Gagneur, Julien; Wieland, Thomas; Terrile, Caterina; Strom, Tim M; Meitinger, Thomas; Hoffmann, Georg F; Prokisch, Holger

    2015-07-02

    Acute liver failure (ALF) in infancy and childhood is a life-threatening emergency. Few conditions are known to cause recurrent acute liver failure (RALF), and in about 50% of cases, the underlying molecular cause remains unresolved. Exome sequencing in five unrelated individuals with fever-dependent RALF revealed biallelic mutations in NBAS. Subsequent Sanger sequencing of NBAS in 15 additional unrelated individuals with RALF or ALF identified compound heterozygous mutations in an additional six individuals from five families. Immunoblot analysis of mutant fibroblasts showed reduced protein levels of NBAS and its proposed interaction partner p31, both involved in retrograde transport between endoplasmic reticulum and Golgi. We recommend NBAS analysis in individuals with acute infantile liver failure, especially if triggered by fever. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  3. Causes analysis on the failure of government environmental responsibility—Based on the perspective of law and economics

    NASA Astrophysics Data System (ADS)

    Fa, L. N.

    2017-11-01

    As the important Environmental Interests of Subjects, government behooves to undertake the corresponding responsibility of Pollution Control and Environmental Protection. The current situations in our country, however, appear as government environmental responsibility failure. Based on the analysis of law and economics, this article reaches the conclusion through game analysis, principle-agency relationship and utility theory that the prisoners dilemma of environmental interest game between government and enterprise, and the inherent defect of the principal-agency relationship between central government and local government are the inherent causes of government environmental responsibility failure. Many officials tends to graft and corrupt to maximum their own benefit, thus leading to the government failure among environmental pollution treatment and the environmental responsibility to undertake.

  4. Growth failure and nutrition considerations in chronic childhood wasting diseases.

    PubMed

    Kyle, Ursula G; Shekerdemian, Lara S; Coss-Bu, Jorge A

    2015-04-01

    Growth failure is a common problem in many children with chronic diseases. This article is an overview of the most common causes of growth failure/growth retardation that affect children with a number of chronic diseases. We also briefly review the nutrition considerations and treatment goals. Growth failure is multifactorial in children with chronic conditions, including patients with cystic fibrosis, chronic kidney disease, chronic liver disease, congenital heart disease, human immunodeficiency virus, inflammatory bowel disease, short bowel syndrome, and muscular dystrophies. Important contributory factors to growth failure include increased energy needs, increased energy loss, malabsorption, decreased energy intake, anorexia, pain, vomiting, intestinal obstruction, and inflammatory cytokines. Various metabolic and pathologic abnormalities that are characteristic of chronic diseases further lead to significant malnutrition and growth failure. In addition to treating disease-specific abnormalities, treatment should address the energy and protein deficits, including vitamin and mineral supplements to correct deficiencies, correct metabolic and endocrinologic abnormalities, and include long-term monitoring of weight and growth. Individualized, age-appropriate nutrition intervention will minimize the malnutrition and growth failure seen in children with chronic diseases. © 2014 American Society for Parenteral and Enteral Nutrition.

  5. Comprehensive Analysis of Gene Expression Profiles of Sepsis-Induced Multiorgan Failure Identified Its Valuable Biomarkers.

    PubMed

    Wang, Yumei; Yin, Xiaoling; Yang, Fang

    2018-02-01

    Sepsis is an inflammatory-related disease, and severe sepsis would induce multiorgan dysfunction, which is the most common cause of death of patients in noncoronary intensive care units. Progression of novel therapeutic strategies has proven to be of little impact on the mortality of severe sepsis, and unfortunately, its mechanisms still remain poorly understood. In this study, we analyzed gene expression profiles of severe sepsis with failure of lung, kidney, and liver for the identification of potential biomarkers. We first downloaded the gene expression profiles from the Gene Expression Omnibus and performed preprocessing of raw microarray data sets and identification of differential expression genes (DEGs) through the R programming software; then, significantly enriched functions of DEGs in lung, kidney, and liver failure sepsis samples were obtained from the Database for Annotation, Visualization, and Integrated Discovery; finally, protein-protein interaction network was constructed for DEGs based on the STRING database, and network modules were also obtained through the MCODE cluster method. As a result, lung failure sepsis has the highest number of DEGs of 859, whereas the number of DEGs in kidney and liver failure sepsis samples is 178 and 175, respectively. In addition, 17 overlaps were obtained among the three lists of DEGs. Biological processes related to immune and inflammatory response were found to be significantly enriched in DEGs. Network and module analysis identified four gene clusters in which all or most of genes were upregulated. The expression changes of Icam1 and Socs3 were further validated through quantitative PCR analysis. This study should shed light on the development of sepsis and provide potential therapeutic targets for sepsis-induced multiorgan failure.

  6. The competing risks Cox model with auxiliary case covariates under weaker missing-at-random cause of failure.

    PubMed

    Nevo, Daniel; Nishihara, Reiko; Ogino, Shuji; Wang, Molin

    2017-08-04

    In the analysis of time-to-event data with multiple causes using a competing risks Cox model, often the cause of failure is unknown for some of the cases. The probability of a missing cause is typically assumed to be independent of the cause given the time of the event and covariates measured before the event occurred. In practice, however, the underlying missing-at-random assumption does not necessarily hold. Motivated by colorectal cancer molecular pathological epidemiology analysis, we develop a method to conduct valid analysis when additional auxiliary variables are available for cases only. We consider a weaker missing-at-random assumption, with missing pattern depending on the observed quantities, which include the auxiliary covariates. We use an informative likelihood approach that will yield consistent estimates even when the underlying model for missing cause of failure is misspecified. The superiority of our method over naive methods in finite samples is demonstrated by simulation study results. We illustrate the use of our method in an analysis of colorectal cancer data from the Nurses' Health Study cohort, where, apparently, the traditional missing-at-random assumption fails to hold.

  7. Academic Self-Concept and Causal Attributions for Success and Failure Amongst Elementary School Children

    ERIC Educational Resources Information Center

    Lohbeck, Annette; Grube, Dietmar; Moschner, Barbara

    2017-01-01

    A great deal of research shows that the way in which children attribute causes to their successes and failures in school has implications for the development of their academic self-concept (ASC). The most common attributions are ability, effort, task difficulty, and luck. The present study asked 68 elementary school children aged seven to eight…

  8. Does Fusarium-caused seed mortality contribute to Bromus tectorum stand failure in the Great Basin?

    Treesearch

    S. E. Meyer; J.-L. Franke; O. W. Baughman; J. Beckstead; B. Geary

    2014-01-01

    Bromus tectorum (cheatgrass, downy brome) is an important invader in western North America, dominating millions of hectares of former semi-arid shrubland. Stand failure or 'die-off' is relatively common in monocultures of this annual grass. The study reported here investigated whether soil-borne pathogens could be causal agents in die-offs. Soils from two die...

  9. [Failure modes and effects analysis in the prescription, validation and dispensing process].

    PubMed

    Delgado Silveira, E; Alvarez Díaz, A; Pérez Menéndez-Conde, C; Serna Pérez, J; Rodríguez Sagrado, M A; Bermejo Vicedo, T

    2012-01-01

    To apply a failure modes and effects analysis to the prescription, validation and dispensing process for hospitalised patients. A work group analysed all of the stages included in the process from prescription to dispensing, identifying the most critical errors and establishing potential failure modes which could produce a mistake. The possible causes, their potential effects, and the existing control systems were analysed to try and stop them from developing. The Hazard Score was calculated, choosing those that were ≥ 8, and a Severity Index = 4 was selected independently of the hazard Score value. Corrective measures and an implementation plan were proposed. A flow diagram that describes the whole process was obtained. A risk analysis was conducted of the chosen critical points, indicating: failure mode, cause, effect, severity, probability, Hazard Score, suggested preventative measure and strategy to achieve so. Failure modes chosen: Prescription on the nurse's form; progress or treatment order (paper); Prescription to incorrect patient; Transcription error by nursing staff and pharmacist; Error preparing the trolley. By applying a failure modes and effects analysis to the prescription, validation and dispensing process, we have been able to identify critical aspects, the stages in which errors may occur and the causes. It has allowed us to analyse the effects on the safety of the process, and establish measures to prevent or reduce them. Copyright © 2010 SEFH. Published by Elsevier Espana. All rights reserved.

  10. Extracorporeal membrane oxygenation: current clinical practice, coding, and reimbursement.

    PubMed

    Schuerer, Douglas J E; Kolovos, Nikoleta S; Boyd, Kayla V; Coopersmith, Craig M

    2008-07-01

    Extracorporeal membrane oxygenation (ECMO) is a technique for providing life support for patients experiencing both pulmonary and cardiac failure by maintaining oxygenation and perfusion until native organ function is restored. ECMO is used routinely at many specialized hospitals for infants and less commonly for children with respiratory or cardiac failure from a variety of causes. Its usage is more controversial in adults, but select medical centers have reported favorable findings in patients with ARDS and other causes of severe pulmonary failure. ECMO is also rarely used as a rescue therapy in a small subset of adult patients with cardiac failure. This article will review the current uses and techniques of ECMO in the critical care setting as well as the evidence supporting its usage. In addition, current practice management related to coding and reimbursement for this intensive therapy will be discussed.

  11. Bending cyclic load test for crystalline silicon photovoltaic modules

    NASA Astrophysics Data System (ADS)

    Suzuki, Soh; Doi, Takuya; Masuda, Atsushi; Tanahashi, Tadanori

    2018-02-01

    The failures induced by thermomechanical fatigue within crystalline silicon photovoltaic modules are a common issue that can occur in any climate. In order to understand these failures, we confirmed the effects of compressive or tensile stresses (which were cyclically loaded on photovoltaic cells and cell interconnect ribbons) at subzero, moderate, and high temperatures. We found that cell cracks were induced predominantly at low temperatures, irrespective of the compression or tension applied to the cells, although the orientation of cell cracks was dependent on the stress applied. The fracture of cell interconnect ribbons was caused by cyclical compressive stress at moderate and high temperatures, and this failure was promoted by the elevation of temperature. On the basis of these results, the causes of these failures are comprehensively discussed in relation to the viscoelasticity of the encapsulant.

  12. The Stressing Effect of Electromigration from the Maxwell Stress and a Preliminary Mean-Time-to-Failure Analysis

    NASA Astrophysics Data System (ADS)

    Zhou, Peng

    2013-06-01

    As temperature increases, it is suggested that atoms on lattice sites serve as dynamic defects and cause a much more homogeneous distribution of the Maxwell stress throughout the crystal lattice compared with that caused by static defects. Though this stressing effect mostly leads to Joule heating, it also results in distortion of the crystal lattice, which leads to a decrease in the activation energy for atomic diffusion and causes enhancements in the phase growth rates at both interfaces of diffusion couples. Due to this stressing effect, the decrease in the activation energy is proportional to a square term of the current density J. A mean-time-to-failure analysis is performed for failure caused by excessive growth of intermediate phases, and a mean-time-to-failure (MTTF) equation is found. This equation appears similar to Black's equation but with an extra exponential term arising from the stressing effect of the crystal lattice.

  13. Comparison of cause of death between anzdata and the australian national death index.

    PubMed

    Sypek, Matthew P; Dansie, Kathryn B; Clayton, Phil; Webster, Angela C; McDonald, Stephen

    2018-03-01

    To understand the differences in how cause of death for patients receiving renal replacement therapy in Australia is recorded in The Australian and New Zealand Dialysis and Transplant Registry (ANZDATA) compared to the National Death Index (NDI). Data linkage was performed between ANZDATA and NDI for all deaths in the period 1980-2013. Cause of death was classified according to ICD-10 chapter. Overall and chapter specific agreement were assessed using the Kappa statistic. Descriptive analysis was used to explore differences where there was disagreement on primary cause of death. The analysis cohort included 28,675 patients. Ninety five percent of ANZDATA reported deaths fell within +/- 3 days of the date recorded by NDI. Circulatory death was the most common cause of death in both databases (ANZDATA 48%, NDI 32%). Overall agreement at ICD chapter level of primary cause was poor (36%, kappa 0.22). Agreement was best for malignancy (kappa 0.71). When there was disagreement on primary cause of death these were most commonly coded as genitourinary (35%) and endocrine (25.0%) in NDI, and circulatory (39%) and withdrawal (24%) in ANZDATA. Sixty-nine percent of patients had a renal related cause documented as either primary or a contributing cause of death in the NDI. There is poor agreement in primary cause of death between ANZDATA and NDI which is in part explained by the absence of diabetes and renal failure as causes of death in ANZDATA and the absence of 'withdrawal' in NDI. These differences should be appreciated when interpreting epidemiological data on cause of death in the Australian end stage kidney disease population. This article is protected by copyright. All rights reserved.

  14. Space Shuttle Stiffener Ring Foam Failure Analysis, a Non-Conventional Approach

    NASA Technical Reports Server (NTRS)

    Howard, Philip M.

    2015-01-01

    The Space Shuttle Program made use of the excellent properties of rigid polyurethane foam for cryogenic tank insulation and as structural protection on the solid rocket boosters. When foam applications de-bond, classical methods of failure analysis did not provide root cause of the failure of the foam. Realizing that foam is the ideal media to document and preserve its own mode of failure, thin sectioning was seen as a logical approach for foam failure analysis to observe the three dimensional morphology of the foam cells. The cell foam morphology provided a much greater understanding of the failure modes than previously achieved.

  15. Microcircuit failure analysis using the SEM. [Scanning Electron Microscopes

    NASA Technical Reports Server (NTRS)

    Nicolas, D. P.

    1974-01-01

    The scanning electron microscope adds a new dimension to the knowledge that can be obtained from a failed microcircuit. When used with conventional techniques, SEM assists and clarifies the analysis, but it does not replace light microscopy. The most advantageous features for microcircuit analysis are long working distances and great depth of field. Manufacturer related failure modes of microcircuits are metallization defects, poor bonding, surface and particle contamination, and design and fabrication faults. User related failure modes are caused by abuse, such as overstress. The Physics of Failure Procedure followed by the Astrionics Laboratory in failure analysis is described, which is designed to obtain maximum information available from each step.

  16. [Acute renal failure secondary to hemolytic uremic syndrome in a pregnant woman with pre-eclampsia].

    PubMed

    García-Miguel, F J; Mirón Rodríguez, M F; Alsina Aser, M J

    2009-02-01

    Acute renal failure is a serious complication of pregnancy associated with a high rate of morbidity and mortality; the incidence is currently 1 per 10,000 pregnancies. The most common causes are gestational hypertension, bleeding, sepsis, and intrinsic renal disease. Other less common pregnancy-related syndromes, such as HELLP syndrome or thrombotic microangiopathy, may also lead to kidney failure. Hemolytic uremic syndrome and thrombotic thrombocytopenic purpura are forms of thrombotic microangiopathy and although neither is specific to pregnancy, the incidence of these entities rises during gestation. The classic symptoms are fever, hemolytic microangiopathic anemia, thrombopenia, neurologic dysfunction, and kidney abnormalities. When renal involvement is the predominant manifestation, the diagnosis is usually hemolytic uremic syndrome.

  17. Investigation into Cause of High Temperature Failure of Boiler Superheater Tube

    NASA Astrophysics Data System (ADS)

    Ghosh, D.; Ray, S.; Roy, H.; Shukla, A. K.

    2015-04-01

    The failure of the boiler tubes occur due to various reasons like creep, fatigue, corrosion and erosion. This paper highlights a case study of typical premature failure of a final superheater tube of 210 MW thermal power plant boiler. Visual examination, dimensional measurement, chemical analysis, oxide scale thickness measurement, microstructural examination are conducted as part of the investigations. Apart from these investigations, sulfur print, Energy Dispersive spectroscopy (EDS) and X ray diffraction analysis (XRD) are also conducted to ascertain the probable cause of failure of final super heater tube. Finally it has been concluded that the premature failure of the super heater tube can be attributed to the combination of localized high tube metal temperature and loss of metal from the outer surface due to high temperature corrosion. The corrective actions have also been suggested to avoid this type of failure in near future.

  18. Common Cause Case Study: An Estimated Probability of Four Solid Rocket Booster Hold-down Post Stud Hang-ups

    NASA Technical Reports Server (NTRS)

    Cross, Robert

    2005-01-01

    Until Solid Rocket Motor ignition, the Space Shuttle is mated to the Mobil Launch Platform in part via eight (8) Solid Rocket Booster (SRB) hold-down bolts. The bolts are fractured using redundant pyrotechnics, and are designed to drop through a hold-down post on the Mobile Launch Platform before the Space Shuttle begins movement. The Space Shuttle program has experienced numerous failures where a bolt has "hung-up." That is, it did not clear the hold-down post before liftoff and was caught by the SRBs. This places an additional structural load on the vehicle that was not included in the original certification requirements. The Space Shuttle is currently being certified to withstand the loads induced by up to three (3) of eight (8) SRB hold-down post studs experiencing a "hang-up." The results af loads analyses performed for four (4) stud-hang ups indicate that the internal vehicle loads exceed current structural certification limits at several locations. To determine the risk to the vehicle from four (4) stud hang-ups, the likelihood of the scenario occurring must first be evaluated. Prior to the analysis discussed in this paper, the likelihood of occurrence had been estimated assuming that the stud hang-ups were completely independent events. That is, it was assumed that no common causes or factors existed between the individual stud hang-up events. A review of the data associated with the hang-up events, showed that a common factor (timing skew) was present. This paper summarizes a revised likelihood evaluation performed for the four (4) stud hang-ups case considering that there are common factors associated with the stud hang-ups. The results show that explicitly (i.e. not using standard common cause methodologies such as beta factor or Multiple Greek Letter modeling) taking into account the common factor of timing skew results in an increase in the estimated likelihood of four (4) stud hang-ups of an order of magnitude over the independent failure case.

  19. Common Cause Case Study: An Estimated Probability of Four Solid Rocket Booster Hold-Down Post Stud Hang-ups

    NASA Technical Reports Server (NTRS)

    Cross, Robert

    2005-01-01

    Until Solid Rocket Motor ignition, the Space Shuttle is mated to the Mobil Launch Platform in part via eight (8) Solid Rocket Booster (SRB) hold-down bolts. The bolts are fractured using redundant pyrotechnics, and are designed to drop through a hold-down post on the Mobile Launch Platform before the Space Shuttle begins movement. The Space Shuttle program has experienced numerous failures where a bolt has hung up. That is, it did not clear the hold-down post before liftoff and was caught by the SRBs. This places an additional structural load on the vehicle that was not included in the original certification requirements. The Space Shuttle is currently being certified to withstand the loads induced by up to three (3) of eight (8) SRB hold-down experiencing a "hang-up". The results of loads analyses performed for (4) stud hang-ups indicate that the internal vehicle loads exceed current structural certification limits at several locations. To determine the risk to the vehicle from four (4) stud hang-ups, the likelihood of the scenario occurring must first be evaluated. Prior to the analysis discussed in this paper, the likelihood of occurrence had been estimated assuming that the stud hang-ups were completely independent events. That is, it was assumed that no common causes or factors existed between the individual stud hang-up events. A review of the data associated with the hang-up events, showed that a common factor (timing skew) was present. This paper summarizes a revised likelihood evaluation performed for the four (4) stud hang-ups case considering that there are common factors associated with the stud hang-ups. The results show that explicitly (i.e. not using standard common cause methodologies such as beta factor or Multiple Greek Letter modeling) taking into account the common factor of timing skew results in an increase in the estimated likelihood of four (4) stud hang-ups of an order of magnitude over the independent failure case.

  20. Obesity Paradox: Comparison of Heart Failure Patients With and Without Comorbid Diabetes.

    PubMed

    Lee, Kyoung Suk; Moser, Debra K; Lennie, Terry A; Pelter, Michele M; Nesbitt, Thomas; Southard, Jeffrey A; Dracup, Kathleen

    2017-03-01

    Diabetes is a common comorbid condition in patients with heart failure and is strongly associated with poor outcomes. Patients with heart failure who have diabetes are more likely to be obese than are those without diabetes. Obesity is positively associated with survival in patients with heart failure, but how comorbid diabetes influences the relationship between obesity and favorable prognosis is unclear. To explore whether the relationship between body mass index and survival differs between patients with heart failure who do or do not have diabetes. The sample consisted of 560 ambulatory patients with heart failure (mean age, 66 years; mean body mass index, 32; diabetes, 41%). The association between body mass index and all-cause mortality was examined by using multivariate Cox proportional hazards regression after adjustments for covariates. In patients without diabetes, higher body mass index was associated with a lower risk for all-cause mortality after adjustments for covariates (hazard ratio, 0.952; 95% CI, 0.909-0.998). In patients with diabetes, body mass index was not predictive of all-cause death after adjustments for covariates. Obesity was a survival benefit in heart failure patients without comorbid diabetes but not in those with comorbid diabetes. The mechanisms underlying the difference in the relationship between obesity and survival due to the presence of diabetes in patients with heart failure need to be elucidated. ©2017 American Association of Critical-Care Nurses.

  1. The standard deviation of extracellular water/intracellular water is associated with all-cause mortality and technique failure in peritoneal dialysis patients.

    PubMed

    Tian, Jun-Ping; Wang, Hong; Du, Feng-He; Wang, Tao

    2016-09-01

    The mortality rate of peritoneal dialysis (PD) patients is still high, and the predicting factors for PD patient mortality remain to be determined. This study aimed to explore the relationship between the standard deviation (SD) of extracellular water/intracellular water (E/I) and all-cause mortality and technique failure in continuous ambulatory PD (CAPD) patients. All 152 patients came from the PD Center between January 1st 2006 and December 31st 2007. Clinical data and at least five-visit E/I ratio defined by bioelectrical impedance analysis were collected. The patients were followed up till December 31st 2010. The primary outcomes were death from any cause and technique failure. Kaplan-Meier analysis and Cox proportional hazards models were used to identify risk factors for mortality and technique failure in CAPD patients. All patients were followed up for 59.6 ± 23.0 months. The patients were divided into two groups according to their SD of E/I values: lower SD of E/I group (≤0.126) and higher SD of E/I group (>0.126). The patients with higher SD of E/I showed a higher all-cause mortality (log-rank χ (2) = 10.719, P = 0.001) and technique failure (log-rank χ (2) = 9.724, P = 0.002) than those with lower SD of E/I. Cox regression analysis found that SD of E/I independently predicted all-cause mortality (HR  3.551, 95 % CI 1.442-8.746, P = 0.006) and technique failure (HR  2.487, 95 % CI 1.093-5.659, P = 0.030) in CAPD patients after adjustment for confounders except when sensitive C-reactive protein was added into the model. The SD of E/I was a strong independent predictor of all-cause mortality and technique failure in CAPD patients.

  2. What are the causes of revision total knee arthroplasty in Japan?

    PubMed

    Kasahara, Yasuhiko; Majima, Tokifumi; Kimura, Shoichi; Nishiike, Osamu; Uchida, Jun

    2013-05-01

    There is limited information regarding the cause of revision TKA in Asia, especially Japan. Owing to differences in patient backgrounds and lifestyles, the modes of TKA failures in Asia may differ from those in Western countries. We therefore determined (1) causes of revision TKA in a cohort of Japanese patients with revision TKA and (2) whether patient demographic features and underlying diagnosis of primary TKA are associated with the causes of revision TKA. We assessed all revision TKA procedures performed at five major centers in Hokkaido from 2006 to 2011 for the causes of failures. Demographic data and underlying diagnosis for index primary TKA of the revision cases were compared to those of randomly selected primary TKAs during the same period. One hundred forty revision TKAs and 4047 primary TKAs were performed at the five centers, indicating a revision burden of 3.3%. The most common cause of revision TKA was mechanical loosening (40%) followed by infection (24%), wear/osteolysis (9%), instability (9%), implant failure (6%), periprosthetic fracture (4%), and other reasons (8%). The mean age of patients with periprosthetic fracture was older (77 versus 72 years) and the male proportion in patients with infection was higher (33% versus 19%) than those of patients in the primary TKA group. There was no difference in BMI between primary TKAs and any type of revision TKA except other causes. The revision burden at the five referral centers in Hokkaido was 3.3%, and the most common cause of revision TKA was mechanical loosening followed by infection. Demographic data such as age and sex might be associated with particular causes of revision TKA.

  3. Valve system incorporating single failure protection logic

    DOEpatents

    Ryan, Rodger; Timmerman, Walter J. H.

    1980-01-01

    A valve system incorporating single failure protective logic. The system consists of a valve combination or composite valve which allows actuation or de-actuation of a device such as a hydraulic cylinder or other mechanism, integral with or separate from the valve assembly, by means of three independent input signals combined in a function commonly known as two-out-of-three logic. Using the input signals as independent and redundant actuation/de-actuation signals, a single signal failure, or failure of the corresponding valve or valve set, will neither prevent the desired action, nor cause the undesired action of the mechanism.

  4. ATM CMG bearing failure analysis

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The cause or causes for the failure of ATM CMG S/N 5 (Skylab 1) and the anomalies associated with ATM CMG S/N 6 (Skylab 2) were investigated. Skylab telemetry data were reviewed and presented in the form of parameter distributions. The theory that the problems were caused by marginal bearing lubrication was studied along with the effects of orbital conditions on lubricants. Bearing tests were performed to investigate the effect of lubricant or lack of lubricant in the ATM CMG bearings and the dispersion and migration of the lubricant. The vacuum and weightless conditions of space were simulated in the bearing tests. Analysis of the results of the tests conducted points to inadequate lubrication as the predominant factor causing the failure of ATM CMG S/N 5 (Skylab 1) and the anomalies associated with ATM CMG S/N 6 (Skylab 2).

  5. Malpractice claims related to musculoskeletal imaging. Incidence and anatomical location of lesions.

    PubMed

    Fileni, Adriano; Fileni, Gaia; Mirk, Paoletta; Magnavita, Giulia; Nicoli, Marzia; Magnavita, Nicola

    2013-12-01

    Failure to detect lesions of the musculoskeletal system is a frequent cause of malpractice claims against radiologists. We examined all the malpractice claims related to alleged errors in musculoskeletal imaging filed against Italian radiologists over a period of 14 years (1993-2006). During the period considered, a total of 416 claims for alleged diagnostic errors relating to the musculoskeletal system were filed against radiologists; of these, 389 (93.5%) concerned failure to report fractures, and 15 (3.6%) failure to diagnose a tumour. Incorrect interpretation of bone pathology is among the most common causes of litigation against radiologists; alone, it accounts for 36.4% of all malpractice claims filed during the observation period. Awareness of this risk should encourage extreme caution and diligence.

  6. Review and Analysis of Existing Mobile Phone Apps to Support Heart Failure Symptom Monitoring and Self-Care Management Using the Mobile Application Rating Scale (MARS).

    PubMed

    Masterson Creber, Ruth M; Maurer, Mathew S; Reading, Meghan; Hiraldo, Grenny; Hickey, Kathleen T; Iribarren, Sarah

    2016-06-14

    Heart failure is the most common cause of hospital readmissions among Medicare beneficiaries and these hospitalizations are often driven by exacerbations in common heart failure symptoms. Patient collaboration with health care providers and decision making is a core component of increasing symptom monitoring and decreasing hospital use. Mobile phone apps offer a potentially cost-effective solution for symptom monitoring and self-care management at the point of need. The purpose of this review of commercially available apps was to identify and assess the functionalities of patient-facing mobile health apps targeted toward supporting heart failure symptom monitoring and self-care management. We searched 3 Web-based mobile app stores using multiple terms and combinations (eg, "heart failure," "cardiology," "heart failure and self-management"). Apps meeting inclusion criteria were evaluated using the Mobile Application Rating Scale (MARS), IMS Institute for Healthcare Informatics functionality scores, and Heart Failure Society of America (HFSA) guidelines for nonpharmacologic management. Apps were downloaded and assessed independently by 2-4 reviewers, interclass correlations between reviewers were calculated, and consensus was met by discussion. Of 3636 potentially relevant apps searched, 34 met inclusion criteria. Most apps were excluded because they were unrelated to heart failure, not in English or Spanish, or were games. Interrater reliability between reviewers was high. AskMD app had the highest average MARS total (4.9/5). More than half of the apps (23/34, 68%) had acceptable MARS scores (>3.0). Heart Failure Health Storylines (4.6) and AskMD (4.5) had the highest scores for behavior change. Factoring MARS, functionality, and HFSA guideline scores, the highest performing apps included Heart Failure Health Storylines, Symple, ContinuousCare Health App, WebMD, and AskMD. Peer-reviewed publications were identified for only 3 of the 34 apps. This review suggests that few apps meet prespecified criteria for quality, content, or functionality, highlighting the need for further refinement and mapping to evidence-based guidelines and room for overall quality improvement in heart failure symptom monitoring and self-care related apps.

  7. Time-related patterns of ventricular shunt failure.

    PubMed

    Kast, J; Duong, D; Nowzari, F; Chadduck, W M; Schiff, S J

    1994-11-01

    Proximal obstruction is reported to be the most common cause of ventriculoperitoneal (VP) shunt failure, suggesting that imperfect ventricular catheter placement and inadequate valve mechanisms are major causes. This study retrospectively examined patterns of shunt failure in 128 consecutive patients with symptoms of shunt malfunction over a 2-year period. Factors analyzed included site of failure, time from shunt placement or last revision to failure, age of patient at time of failure, infections, and primary etiology of the hydrocephalus. One hundred of these patients required revisions; 14 revisions were due to infections. In this series there was a higher incidence of distal (43%) than of proximal (35%) failure. The difference was not statistically significant when the overall series was considered; however, when factoring time to failure as a variable, marked differences were noted regardless of the underlying cause of hydrocephalus or the age of the patient. Of the 49 patients needing a shunt revision or replacement within 2 years of the previous operation, 50% had proximal malfunction, 14% distal, and 10% had malfunctions attributable directly to the valve itself. Also, 12 of the 14 infections occurred during this time interval. In sharp contrast, of the 51 patients having shunt failure from 2 to more than 12 years after the previous procedure, 72% had distal malfunction, 21% proximal, and only 6% had a faulty valve or infection. This difference between time to failure for proximal versus distal failures was statistically significant (P < 0.00001 for both Student's t-test and non-parametric Mann-Whitney U-test).(ABSTRACT TRUNCATED AT 250 WORDS)

  8. Analysis of problems and failures in the measurement of soil-gas radon concentration.

    PubMed

    Neznal, Martin; Neznal, Matěj

    2014-07-01

    Long-term experience in the field of soil-gas radon concentration measurements allows to describe and explain the most frequent causes of failures, which can appear in practice when various types of measurement methods and soil-gas sampling techniques are used. The concept of minimal sampling depth, which depends on the volume of the soil-gas sample and on the soil properties, is shown in detail. Consideration of minimal sampling depth at the time of measurement planning allows to avoid the most common mistakes. The ways how to identify influencing parameters, how to avoid a dilution of soil-gas samples by the atmospheric air, as well as how to recognise inappropriate sampling methods are discussed. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  9. A critical analysis of early death after adult liver transplants.

    PubMed

    Rana, Abbas; Kaplan, Bruce; Jie, Tun; Porubsky, Marian; Habib, Shahid; Rilo, Horacio; Gruessner, Angelika C; Gruessner, Rainer W G

    2013-01-01

    The 15% mortality rate of liver transplant recipients at one yr may be viewed as a feat in comparison with the waiting list mortality, yet it nonetheless leaves room for much improvement. Our aim was to critically examine the mortality rates to identify high-risk periods and to incorporate cause of death into the analysis of post-transplant survival. We performed a retrospective analysis on United Network for Organ Sharing data for all adult recipients of liver transplants from January 1, 2002 to October 31, 2011. Our analysis included multivariate logistic regression where the primary outcome measure was patient death of 49,288 recipients. The highest mortality rate by day post-transplant was on day 0 (0.9%). The most significant risk factors were as follows: for one-d mortality from technical failure, intensive care unit admission odds ratio (OR 3.2); for one-d mortality from graft failure, warm ischemia >75 min (OR 5.6); for one-month mortality from infection, a previous transplant (OR 3.3); and for one-month mortality from graft failure, a previous transplant (OR 3.7). We found that the highest mortality rate after liver transplantation is within the first day and the first month post-transplant. Those two high-risk periods have common, as well as different, risk factors for mortality. © 2013 John Wiley & Sons A/S.

  10. Alewife dieoffs: Why do they occur?

    USGS Publications Warehouse

    Colby, Peter J.

    1971-01-01

    Periodid midwinter, early spring, and summer mortalities of alewives (Alosa pseudoharengus) have been common in the Great Lakes since the first appearance of the silvery marine invader in Lake Ontario in the mid-1870's. In 1967 a nationally publicized dieoff of tremendous magnitude (estimated at several hundred million pounds of fish) in Lake Michigan resulted in losses to industry,municipalities, and recreational interests in excess of $100 million. The cause of these mortalities is still unclear. The apparent inability of this primarily marine species to adjust completely to the Great Lakes has several suspected causes, among which failure to adjust to temperature extremes and fluctuations in the Great Lakes now appears to be of primary importance. Other possible causes are exhaustion of the food supply, failure to osmoregulate (maintain a suitable chemical balance) adequately in fresh water, failure to extract sufficient iodine from the iodine-poor Great Lakes, and a combination of these several possibilities.

  11. Survival analysis for respiratory failure in patients with food-borne botulism.

    PubMed

    Witoonpanich, Rawiphan; Vichayanrat, Ekawat; Tantisiriwit, Kanit; Wongtanate, Manas; Sucharitchan, Niwatchai; Oranrigsupak, Petchdee; Chuesuwan, Aphinya; Nakarawat, Weeraworn; Tima, Ariya; Suwatcharangkoon, Sureerat; Ingsathit, Atiporn; Rattanasiri, Sasivimol; Wananukul, Winai

    2010-03-01

    Botulism is a rare presynaptic neuromuscular junction disorder caused by potent toxins produced by the anaerobic, spore-forming, Gram-positive bacterium Clostridium botulinum. Food-borne botulism is caused by the ingestion of foods contaminated with botulinum toxin. In March 2006, there was a large outbreak of food-borne botulism associated with the ingestion of home-canned bamboo shoots in Thailand. The survival analyses for respiratory failure in these patients were studied and are reported here. A prospective observational cohort study was conducted on this outbreak. The primary outcome of interest was the time to respiratory failure. The secondary outcome was the time to weaning off ventilator. The prognostic factors associated with respiratory failure and weaning off ventilator are presented. A total of 91 in-patients with baseline clinical characteristics were included. Most cases first presented with gastrointestinal symptoms followed by neurological symptoms, the most striking of which being difficulty in swallowing. Common clinical features included ptosis, ophthalmoplegia, proximal muscle weakness, pupillary abnormality, and respiratory failure. Forty-two patients developed respiratory failure requiring mechanical ventilation and the median duration on ventilator was 14 days. The median length of hospital stay for all patients was 13.5 days. Difficulty in breathing, moderate to severe ptosis, and dilated and fixed pupils were associated with respiratory failure. Among patients who were on ventilators, a short incubation period and pupillary abnormality were associated with a longer period of mechanical ventilation. All patients had antitoxin injection and there was no mortality in this outbreak. The history of difficult breathing and the findings of moderate to severe ptosis and pupillary abnormality were associated with severe illness and respiratory failure. A long incubation time was associated with a better prognosis. Although botulism is a potentially fatal disease, there was no mortality in this outbreak. All patients had antitoxin injection and good intensive care that resulted in good clinical outcomes.

  12. Risk assessment for enterprise resource planning (ERP) system implementations: a fault tree analysis approach

    NASA Astrophysics Data System (ADS)

    Zeng, Yajun; Skibniewski, Miroslaw J.

    2013-08-01

    Enterprise resource planning (ERP) system implementations are often characterised with large capital outlay, long implementation duration, and high risk of failure. In order to avoid ERP implementation failure and realise the benefits of the system, sound risk management is the key. This paper proposes a probabilistic risk assessment approach for ERP system implementation projects based on fault tree analysis, which models the relationship between ERP system components and specific risk factors. Unlike traditional risk management approaches that have been mostly focused on meeting project budget and schedule objectives, the proposed approach intends to address the risks that may cause ERP system usage failure. The approach can be used to identify the root causes of ERP system implementation usage failure and quantify the impact of critical component failures or critical risk events in the implementation process.

  13. Tube Failure Mechanisms.

    DTIC Science & Technology

    studies will be made: ( a ) An investigation of the factors influencing electrical breakdown in a vacuum and across the surface of a dielectric. (b) An...The purpose of this program is to investigate the nature and the principal causes of failures in microwave tubes. In this context, the following...investigation of the various electrical and surface properties of materials commonly used in microwave tubes, i.e., OFHC copper, alumina ceramic, tungsten

  14. Induction motor inter turn fault detection using infrared thermographic analysis

    NASA Astrophysics Data System (ADS)

    Singh, Gurmeet; Anil Kumar, T. Ch.; Naikan, V. N. A.

    2016-07-01

    Induction motors are the most commonly used prime movers in industries. These are subjected to various environmental, thermal and load stresses that ultimately reduces the motor efficiency and later leads to failure. Inter turn fault is the second most commonly observed faults in the motors and is considered the most severe. It can lead to the failure of complete phase and can even cause accidents, if left undetected or untreated. This paper proposes an online and non invasive technique that uses infrared thermography, in order to detect the presence of inter turn fault in induction motor drive. Two methods have been proposed that detect the fault and estimate its severity. One method uses transient thermal monitoring during the start of motor and other applies pseudo coloring technique on infrared image of the motor, after it reaches a thermal steady state. The designed template for pseudo-coloring is in acquiescence with the InterNational Electrical Testing Association (NETA) thermographic standard. An index is proposed to assess the severity of the fault present in the motor.

  15. Liver failure due to antithyroid drugs: report of a case and literature review.

    PubMed

    Livadas, Sarantis; Xyrafis, Xenofon; Economou, Frangiskos; Boutzios, Georgios; Christou, Maria; Zerva, Aristea; Karachalios, Athanasios; Palioura, Helen; Palimeri, Sotiria; Diamanti-Kandarakis, Evanthia

    2010-08-01

    Hyperthyroidism is a common endocrine disorder affecting 2% of females and 0.5% of males worldwide and antithyroid drugs constitute the first line of treatment in the majority of cases. These agents may cause severe adverse effects and among them liver failure, although rare, is a potential lethal one. This case illustrates the sudden and abrupt deterioration of hepatic function due to antithyroid drug administration. This case along with a concise literature review is presented aiming to increase the awareness of endocrinologists of possible fatal complications from the everyday use of common agents such as antithyroid drugs.

  16. Analytical Study of different types Of network failure detection and possible remedies

    NASA Astrophysics Data System (ADS)

    Saxena, Shikha; Chandra, Somnath

    2012-07-01

    Faults in a network have various causes,such as the failure of one or more routers, fiber-cuts, failure of physical elements at the optical layer, or extraneous causes like power outages. These faults are usually detected as failures of a set of dependent logical entities and the links affected by the failed components. A reliable control plane plays a crucial role in creating high-level services in the next-generation transport network based on the Generalized Multiprotocol Label Switching (GMPLS) or Automatically Switched Optical Networks (ASON) model. In this paper, approaches to control-plane survivability, based on protection and restoration mechanisms, are examined. Procedures for the control plane state recovery are also discussed, including link and node failure recovery and the concepts of monitoring paths (MPs) and monitoring cycles (MCs) for unique localization of shared risk linked group (SRLG) failures in all-optical networks. An SRLG failure is a failure of multiple links due to a failure of a common resource. MCs (MPs) start and end at same (distinct) monitoring location(s). They are constructed such that any SRLG failure results in the failure of a unique combination of paths and cycles. We derive necessary and sufficient conditions on the set of MCs and MPs needed for localizing an SRLG failure in an arbitrary graph. Procedure of Protection and Restoration of the SRLG failure by backup re-provisioning algorithm have also been discussed.

  17. Comparing the Identification of Recommendations by Different Accident Investigators Using a Common Methodology

    NASA Technical Reports Server (NTRS)

    Johnson, Chris W.; Oltedal, H. A.; Holloway, C. M.

    2012-01-01

    Accident reports play a key role in the safety of complex systems. These reports present the recommendations that are intended to help avoid any recurrence of past failures. However, the value of these findings depends upon the causal analysis that helps to identify the reasons why an accident occurred. Various techniques have been developed to help investigators distinguish root causes from contributory factors and contextual information. This paper presents the results from a study into the individual differences that can arise when a group of investigators independently apply the same technique to identify the causes of an accident. This work is important if we are to increase the consistency and coherence of investigations following major accidents.

  18. Physiology of respiratory disturbances in muscular dystrophies

    PubMed Central

    Lo Mauro, Antonella

    2016-01-01

    Muscular dystrophy is a group of inherited myopathies characterised by progressive skeletal muscle wasting, including of the respiratory muscles. Respiratory failure, i.e. when the respiratory system fails in its gas exchange functions, is a common feature in muscular dystrophy, being the main cause of death, and it is a consequence of lung failure, pump failure or a combination of the two. The former is due to recurrent aspiration, the latter to progressive weakness of respiratory muscles and an increase in the load against which they must contract. In fact, both the resistive and elastic components of the work of breathing increase due to airway obstruction and chest wall and lung stiffening, respectively. The respiratory disturbances in muscular dystrophy are restrictive pulmonary function, hypoventilation, altered thoracoabdominal pattern, hypercapnia, dyspnoea, impaired regulation of breathing, inefficient cough and sleep disordered breathing. They can be present at different rates according to the type of muscular dystrophy and its progression, leading to different onset of each symptom, prognosis and degree of respiratory involvement. Key points A common feature of muscular dystrophy is respiratory failure, i.e. the inability of the respiratory system to provide proper oxygenation and carbon dioxide elimination. In the lung, respiratory failure is caused by recurrent aspiration, and leads to hypoxaemia and hypercarbia. Ventilatory failure in muscular dystrophy is caused by increased respiratory load and respiratory muscles weakness. Respiratory load increases in muscular dystrophy because scoliosis makes chest wall compliance decrease, atelectasis and fibrosis make lung compliance decrease, and airway obstruction makes airway resistance increase. The consequences of respiratory pump failure are restrictive pulmonary function, hypoventilation, altered thoracoabdominal pattern, hypercapnia, dyspnoea, impaired regulation of breathing, inefficient cough and sleep disordered breathing. Educational aims To understand the mechanisms leading to respiratory disturbances in patients with muscular dystrophy. To understand the impact of respiratory disturbances in patients with muscular dystrophy. To provide a brief description of the main forms of muscular dystrophy with their respiratory implications. PMID:28210319

  19. Physiology of respiratory disturbances in muscular dystrophies.

    PubMed

    Lo Mauro, Antonella; Aliverti, Andrea

    2016-12-01

    Muscular dystrophy is a group of inherited myopathies characterised by progressive skeletal muscle wasting, including of the respiratory muscles. Respiratory failure, i.e . when the respiratory system fails in its gas exchange functions, is a common feature in muscular dystrophy, being the main cause of death, and it is a consequence of lung failure, pump failure or a combination of the two. The former is due to recurrent aspiration, the latter to progressive weakness of respiratory muscles and an increase in the load against which they must contract. In fact, both the resistive and elastic components of the work of breathing increase due to airway obstruction and chest wall and lung stiffening, respectively. The respiratory disturbances in muscular dystrophy are restrictive pulmonary function, hypoventilation, altered thoracoabdominal pattern, hypercapnia, dyspnoea, impaired regulation of breathing, inefficient cough and sleep disordered breathing. They can be present at different rates according to the type of muscular dystrophy and its progression, leading to different onset of each symptom, prognosis and degree of respiratory involvement. A common feature of muscular dystrophy is respiratory failure, i.e. the inability of the respiratory system to provide proper oxygenation and carbon dioxide elimination.In the lung, respiratory failure is caused by recurrent aspiration, and leads to hypoxaemia and hypercarbia.Ventilatory failure in muscular dystrophy is caused by increased respiratory load and respiratory muscles weakness.Respiratory load increases in muscular dystrophy because scoliosis makes chest wall compliance decrease, atelectasis and fibrosis make lung compliance decrease, and airway obstruction makes airway resistance increase.The consequences of respiratory pump failure are restrictive pulmonary function, hypoventilation, altered thoracoabdominal pattern, hypercapnia, dyspnoea, impaired regulation of breathing, inefficient cough and sleep disordered breathing. To understand the mechanisms leading to respiratory disturbances in patients with muscular dystrophy.To understand the impact of respiratory disturbances in patients with muscular dystrophy.To provide a brief description of the main forms of muscular dystrophy with their respiratory implications.

  20. "If at first you don't succeed": using failure to improve teaching.

    PubMed

    Pinsky, L E; Irby, D M

    1997-11-01

    The authors surveyed a group of distinguished clinical teachers regarding episodes of failure that had subsequently led to improvements in their teaching. Specifically, they examined how these teachers had used reflection on failed approaches as a tool for experiential learning. The respondents believed that failures were as important as successes in learning to be a good teacher. Using qualitative content analysis of the respondents' comments, the authors identified eight common types of failure associated with each of the three phases of teaching: planning, teaching, and reflection. Common failures associated with the planning stage were misjudging learners, lack of preparation, presenting too much content, lack of purpose, and difficulties with audiovisuals. The primary failure associated with actual teaching was inflexibly using a single teaching method. In the reflection phase, respondents said they most often realized that they had made one of two common errors: selecting the wrong teaching strategy or incorrectly implementing a sound strategy. For each identified failure, the respondents made recommendations for improvement. The deliberative process that had guided planning, teaching, and reflecting had helped all of them transform past failures into successes.

  1. Genetic mechanisms of multidrug resistance among Klebsiella pneumoniae isolates from food-producing animals and humans in Lagos, Nigeria

    USDA-ARS?s Scientific Manuscript database

    Klebsiella pneumoniae is an opportunistic pathogen that commonly causes hospital and community acquired bacterial infections in humans. The emergence and rapid spread of multi- drug resistant (MDR) K. pneumoniae is causing drug therapy failure amid patients leading to poor antibiotic management glob...

  2. WE-G-BRA-08: Failure Modes and Effects Analysis (FMEA) for Gamma Knife Radiosurgery

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Xu, Y; Bhatnagar, J; Bednarz, G

    2015-06-15

    Purpose: To perform a failure modes and effects analysis (FMEA) study for Gamma Knife (GK) radiosurgery processes at our institution based on our experience with the treatment of more than 13,000 patients. Methods: A team consisting of medical physicists, nurses, radiation oncologists, neurosurgeons at the University of Pittsburgh Medical Center and an external physicist expert was formed for the FMEA study. A process tree and a failure mode table were created for the GK procedures using the Leksell GK Perfexion and 4C units. Three scores for the probability of occurrence (O), the severity (S), and the probability of no detectionmore » (D) for failure modes were assigned to each failure mode by each professional on a scale from 1 to 10. The risk priority number (RPN) for each failure mode was then calculated (RPN = OxSxD) as the average scores from all data sets collected. Results: The established process tree for GK radiosurgery consists of 10 sub-processes and 53 steps, including a sub-process for frame placement and 11 steps that are directly related to the frame-based nature of the GK radiosurgery. Out of the 86 failure modes identified, 40 failure modes are GK specific, caused by the potential for inappropriate use of the radiosurgery head frame, the imaging fiducial boxes, the GK helmets and plugs, and the GammaPlan treatment planning system. The other 46 failure modes are associated with the registration, imaging, image transfer, contouring processes that are common for all radiation therapy techniques. The failure modes with the highest hazard scores are related to imperfect frame adaptor attachment, bad fiducial box assembly, overlooked target areas, inaccurate previous treatment information and excessive patient movement during MRI scan. Conclusion: The implementation of the FMEA approach for Gamma Knife radiosurgery enabled deeper understanding of the overall process among all professionals involved in the care of the patient and helped identify potential weaknesses in the overall process.« less

  3. Worsening renal function in patients admitted with acute decompensated heart failure: incidence, risk factors and prognostic implications.

    PubMed

    Belziti, César A; Bagnati, Rodrigo; Ledesma, Paola; Vulcano, Norberto; Fernández, Sandra

    2010-03-01

    Acute decompensated heart failure (ADHF) is a common cause of hospital admission and is associated with an increased risk of worsening renal function (WRF). The aims of this study were to investigate the incidence and predictors of WRF in patients admitted for ADHF and to assess the prognostic significance of WRF at 1 year. A retrospective analysis of data on 200 consecutive patients admitted with ADHF was carried out. By definition, WRF occurred when the serum creatinine level increased during hospitalization by 0.3 mg/dL and by > or =25% from admission. Overall, 23% of patients developed WRF. On multivariate analysis, age >80 years (odds ratio [OR]=2.72; 95% confidence interval [CI], 1.86-3.42), admission glomerular filtration rate <60 mL/min per 1.73 m2 (OR=2.05; 95% CI, 1.53-2.27) and admission systolic pressure <90 mmHg (OR=1.61, 95% CI, 1.17-3.22) were independently associated with WRF. The rate of mortality or readmission for heart failure (HF) at 1 year was higher in the WRF group (P< .01 by log-rank test). The median hospital stay was 9 days for patients with WRF and 4 days for those without (P< .05). On multivariate analysis, WRF remained independently associated with mortality or HF rehospitalization (hazard ratio=1.65; 95% CI, 1.12-2.67; P=.003). In patients admitted for ADHF, WRF was a common complication and was associated with a longer hospital stay and an increased risk of mortality or HF hospitalization. Clinical characteristics at admission can help identify patients at an increased risk of WRF.

  4. Pattern of infection, therapy, outcome and risk stratification of patients with febrile neutropenia in a tertiary care oncology hospital in India.

    PubMed

    Noronha, V; Joshi, A; Patil, V M; Bhosale, B; Muddu, V K; Banavali, S; Kelkar, R; Prabhash, K

    2014-01-01

    Indian febrile neutropenia (FN) data are limited, especially in adult solid tumor patients. The aim was to study patterns of presentation, source of infection, management and outcome and to evaluate the factors which may correlate with outcome. A retrospective analysis of prospective data of FN patients at a tertiary care oncology teaching hospital in India between 2007 and 2012. A standardized form was filled for each patient. Patient management was at the discretion of the treating physician. Multinational Association for Supportive Care in Cancer (MASCC) score was retrospectively calculated. Failure of therapy was defined as death, organ failure, shifting from outpatient to inpatient or requirement of intensive care support. SPSS version 16 was used for analysis. A total of 388 FN episodes were included: 256 in hematolymphoid and 132 in solid tumor patients. 156 episodes were high-risk by MASCC score. Focus of infection was clinical in 45% and radiologic in 16%. Blood cultures were positive in 18% cases, most commonly Gram-negative organisms (72%). 93% patients were treated with an antibiotic combination of third-generation cephalosporin/beta-lactamase inhibitor, with aminoglycoside or fluoroquinolone. Antibiotic sensitivity to ceftriaxone was low at 38% while sensitivity to cefoperazone/sulbactam and piperacillin/tazobactam ranged between 50% and 55% and for carbapenems 75%. Failure of therapy occurred in 156 episodes, most commonly due to the need for second line antibiotics. Mortality was 5.5%. On univariate analysis, MASCC score, age, type of malignancy, prophylactic growth factors, presence of focus of infection, hemoglobin and nadir platelet count correlated with FN complications. Gram-negative bacteremia continues to be the predominant cause of FN in our setup.

  5. Nest success, cause-specific nest failure, and hatchability of aquatic birds at selenium-contaminated Kesterson Reservoir and a reference site

    USGS Publications Warehouse

    Ohlendorf, Harry M.; Hothem, Roger L.; Welsh, Daniel

    1989-01-01

    During 1983-1985, we studied the reproductive success of several species of aquatic birds (coots, ducks, shorebirds, and grebes) nesting at two sites in Merced County, California: a selenium-contaminated site (Kesterson Reservoir) and a nearby reference site (Volta Wildlife Area). We used a computer program (MICROMORT) developed for the analysis of radiotelemetry data (Heisey and Fuller 1985) to estimate nest success and cause-specific failure rates, and then compared these parameters and hatchability between sites and among years. Nest success and causes of failure varied by species, site, and year. The most important causes of nest failure were usually predation, desertion, and water-level changes. However, embryotoxicosis (mortality, deformity, and lack of embryonic development) was the most important cause of nest failure in Eared Grebes (Podiceps nigricollis) at Kesterson Reservoir. Embryotoxicosis also reduced the hatchability of eggs of all other species at Kesterson in one or more years; embryonic mortality occurred rarely at Volta, and abnormalities were not observed.

  6. Bench-to-bedside review: Rhabdomyolysis – an overview for clinicians

    PubMed Central

    Huerta-Alardín, Ana L; Varon, Joseph; Marik, Paul E

    2005-01-01

    Rhabdomyolysis ranges from an asymptomatic illness with elevation in the creatine kinase level to a life-threatening condition associated with extreme elevations in creatine kinase, electrolyte imbalances, acute renal failure and disseminated intravascular coagulation. Muscular trauma is the most common cause of rhabdomyolysis. Less common causes include muscle enzyme deficiencies, electrolyte abnormalities, infectious causes, drugs, toxins and endocrinopathies. Weakness, myalgia and tea-colored urine are the main clinical manifestations. The most sensitive laboratory finding of muscle injury is an elevated plasma creatine kinase level. The management of patients with rhabdomyolysis includes early vigorous hydration. PMID:15774072

  7. Microscopical analysis of synovial fluid wear debris from failing CoCr hip prostheses

    NASA Astrophysics Data System (ADS)

    Ward, M. B.; Brown, A. P.; Cox, A.; Curry, A.; Denton, J.

    2010-07-01

    Metal on metal hip joint prostheses are now commonly implanted in patients with hip problems. Although hip replacements largely go ahead problem free, some complications can arise such as infection immediately after surgery and aseptic necrosis caused by vascular complications due to surgery. A recent observation that has been made at Manchester is that some Cobalt Chromium (CoCr) implants are causing chronic pain, with the source being as yet unidentified. This form of replacement failure is independent of surgeon or hospital and so some underlying body/implant interface process is thought to be the problem. When the synovial fluid from a failed joint is examined particles of metal (wear debris) can be found. Transmission Electron Microscopy (TEM) has been used to look at fixed and sectioned samples of the synovial fluid and this has identified fine (< 100 nm) metal and metal oxide particles within the fluid. TEM EDX and Electron Energy Loss Spectroscopy (EELS) have been employed to examine the composition of the particles, showing them to be chromium rich. This gives rise to concern that the failure mechanism may be associated with the debris.

  8. Fuzzy Bayesian Network-Bow-Tie Analysis of Gas Leakage during Biomass Gasification

    PubMed Central

    Yan, Fang; Xu, Kaili; Yao, Xiwen; Li, Yang

    2016-01-01

    Biomass gasification technology has been rapidly developed recently. But fire and poisoning accidents caused by gas leakage restrict the development and promotion of biomass gasification. Therefore, probabilistic safety assessment (PSA) is necessary for biomass gasification system. Subsequently, Bayesian network-bow-tie (BN-bow-tie) analysis was proposed by mapping bow-tie analysis into Bayesian network (BN). Causes of gas leakage and the accidents triggered by gas leakage can be obtained by bow-tie analysis, and BN was used to confirm the critical nodes of accidents by introducing corresponding three importance measures. Meanwhile, certain occurrence probability of failure was needed in PSA. In view of the insufficient failure data of biomass gasification, the occurrence probability of failure which cannot be obtained from standard reliability data sources was confirmed by fuzzy methods based on expert judgment. An improved approach considered expert weighting to aggregate fuzzy numbers included triangular and trapezoidal numbers was proposed, and the occurrence probability of failure was obtained. Finally, safety measures were indicated based on the obtained critical nodes. The theoretical occurrence probabilities in one year of gas leakage and the accidents caused by it were reduced to 1/10.3 of the original values by these safety measures. PMID:27463975

  9. A case study in nonconformance and performance trend analysis

    NASA Technical Reports Server (NTRS)

    Maloy, Joseph E.; Newton, Coy P.

    1990-01-01

    As part of NASA's effort to develop an agency-wide approach to trend analysis, a pilot nonconformance and performance trending analysis study was conducted on the Space Shuttle auxiliary power unit (APU). The purpose of the study was to (1) demonstrate that nonconformance analysis can be used to identify repeating failures of a specific item (and the associated failure modes and causes) and (2) determine whether performance parameters could be analyzed and monitored to provide an indication of component or system degradation prior to failure. The nonconformance analysis of the APU did identify repeating component failures, which possibly could be reduced if key performance parameters were monitored and analyzed. The performance-trending analysis verified that the characteristics of hardware parameters can be effective in detecting degradation of hardware performance prior to failure.

  10. Improving risk management: from lame excuses to principled practice.

    PubMed

    Paté-Cornell, Elisabeth; Cox, Louis Anthony

    2014-07-01

    The three classic pillars of risk analysis are risk assessment (how big is the risk and how sure can we be?), risk management (what shall we do about it?), and risk communication (what shall we say about it, to whom, when, and how?). We propose two complements as important parts of these three bases: risk attribution (who or what addressable conditions actually caused an accident or loss?) and learning from experience about risk reduction (what works, and how well?). Failures in complex systems usually evoke blame, often with insufficient attention to root causes of failure, including some aspects of the situation, design decisions, or social norms and culture. Focusing on blame, however, can inhibit effective learning, instead eliciting excuses to deflect attention and perceived culpability. Productive understanding of what went wrong, and how to do better, thus requires moving past recrimination and excuses. This article identifies common blame-shifting "lame excuses" for poor risk management. These generally contribute little to effective improvements and may leave real risks and preventable causes unaddressed. We propose principles from risk and decision sciences and organizational design to improve results. These start with organizational leadership. More specifically, they include: deliberate testing and learning-especially from near-misses and accident precursors; careful causal analysis of accidents; risk quantification; candid expression of uncertainties about costs and benefits of risk-reduction options; optimization of tradeoffs between gathering additional information and immediate action; promotion of safety culture; and mindful allocation of people, responsibilities, and resources to reduce risks. We propose that these principles provide sound foundations for improving successful risk management. © 2014 Society for Risk Analysis.

  11. Fractography, NDE, and fracture mechanics applications in failure analysis studies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Morin, C.R.; Shipley, R.J.; Wilkinson, J.A.

    1994-10-01

    While identification of the precise mode of a failure can lead logically to the underlying cause, a thorough failure investigation requires much more than just the identification of a specific metallurgical mechanism, for example, fatigue, creep, stress corrosion cracking, etc. Failures involving fracture provide good illustrations of this concept. An initial step in characterizing fracture surfaces is often the identification of an origin or origins. However, the analysis should not stop there. If the origin is associated with a discontinuity, the manner in which it was formed must also be addressed. The stresses that would have existed at the originmore » must be determined and compared with material properties to determine whether or not a crack should have initiated and propagated during normal operation. Many critical components are inspected throughout their lives by nondestructive methods. When a crack progresses to failure, its nondetection at earlier inspections must also be understood. Careful study of the fracture surface combined with crack growth analysis based on fracture mechanics can provide an estimate of the crack length at the times of previous inspections. An important issue often overlooked in such studies is how processing of parts during manufacture or rework affects the probability of detection of such cracks. The ultimate goal is to understand thoroughly the progression of the failure, to understand the root cause(s), and to design appropriate corrective action(s) to minimize recurrence.« less

  12. Health assessment of cooling fan bearings using wavelet-based filtering.

    PubMed

    Miao, Qiang; Tang, Chao; Liang, Wei; Pecht, Michael

    2012-12-24

    As commonly used forced convection air cooling devices in electronics, cooling fans are crucial for guaranteeing the reliability of electronic systems. In a cooling fan assembly, fan bearing failure is a major failure mode that causes excessive vibration, noise, reduction in rotation speed, locked rotor, failure to start, and other problems; therefore, it is necessary to conduct research on the health assessment of cooling fan bearings. This paper presents a vibration-based fan bearing health evaluation method using comblet filtering and exponentially weighted moving average. A new health condition indicator (HCI) for fan bearing degradation assessment is proposed. In order to collect the vibration data for validation of the proposed method, a cooling fan accelerated life test was conducted to simulate the lubricant starvation of fan bearings. A comparison between the proposed method and methods in previous studies (i.e., root mean square, kurtosis, and fault growth parameter) was carried out to assess the performance of the HCI. The analysis results suggest that the HCI can identify incipient fan bearing failures and describe the bearing degradation process. Overall, the work presented in this paper provides a promising method for fan bearing health evaluation and prognosis.

  13. Health Assessment of Cooling Fan Bearings Using Wavelet-Based Filtering

    PubMed Central

    Miao, Qiang; Tang, Chao; Liang, Wei; Pecht, Michael

    2013-01-01

    As commonly used forced convection air cooling devices in electronics, cooling fans are crucial for guaranteeing the reliability of electronic systems. In a cooling fan assembly, fan bearing failure is a major failure mode that causes excessive vibration, noise, reduction in rotation speed, locked rotor, failure to start, and other problems; therefore, it is necessary to conduct research on the health assessment of cooling fan bearings. This paper presents a vibration-based fan bearing health evaluation method using comblet filtering and exponentially weighted moving average. A new health condition indicator (HCI) for fan bearing degradation assessment is proposed. In order to collect the vibration data for validation of the proposed method, a cooling fan accelerated life test was conducted to simulate the lubricant starvation of fan bearings. A comparison between the proposed method and methods in previous studies (i.e., root mean square, kurtosis, and fault growth parameter) was carried out to assess the performance of the HCI. The analysis results suggest that the HCI can identify incipient fan bearing failures and describe the bearing degradation process. Overall, the work presented in this paper provides a promising method for fan bearing health evaluation and prognosis. PMID:23262486

  14. Frequency and Type of Situational Awareness Errors Contributing to Death and Brain Damage: A Closed Claims Analysis.

    PubMed

    Schulz, Christian M; Burden, Amanda; Posner, Karen L; Mincer, Shawn L; Steadman, Randolph; Wagner, Klaus J; Domino, Karen B

    2017-08-01

    Situational awareness errors may play an important role in the genesis of patient harm. The authors examined closed anesthesia malpractice claims for death or brain damage to determine the frequency and type of situational awareness errors. Surgical and procedural anesthesia death and brain damage claims in the Anesthesia Closed Claims Project database were analyzed. Situational awareness error was defined as failure to perceive relevant clinical information, failure to comprehend the meaning of available information, or failure to project, anticipate, or plan. Patient and case characteristics, primary damaging events, and anesthesia payments in claims with situational awareness errors were compared to other death and brain damage claims from 2002 to 2013. Anesthesiologist situational awareness errors contributed to death or brain damage in 198 of 266 claims (74%). Respiratory system damaging events were more common in claims with situational awareness errors (56%) than other claims (21%, P < 0.001). The most common specific respiratory events in error claims were inadequate oxygenation or ventilation (24%), difficult intubation (11%), and aspiration (10%). Payments were made in 85% of situational awareness error claims compared to 46% in other claims (P = 0.001), with no significant difference in payment size. Among 198 claims with anesthesia situational awareness error, perception errors were most common (42%), whereas comprehension errors (29%) and projection errors (29%) were relatively less common. Situational awareness error definitions were operationalized for reliable application to real-world anesthesia cases. Situational awareness errors may have contributed to catastrophic outcomes in three quarters of recent anesthesia malpractice claims.Situational awareness errors resulting in death or brain damage remain prevalent causes of malpractice claims in the 21st century.

  15. Relationship between angina pectoris and outcomes in patients with heart failure and reduced ejection fraction: an analysis of the Controlled Rosuvastatin Multinational Trial in Heart Failure (CORONA).

    PubMed

    Badar, Athar A; Perez-Moreno, Ana Cristina; Jhund, Pardeep S; Wong, Chih M; Hawkins, Nathaniel M; Cleland, John G F; van Veldhuisen, Dirk J; Wikstrand, John; Kjekshus, John; Wedel, Hans; Watkins, Stuart; Gardner, Roy S; Petrie, Mark C; McMurray, John J V

    2014-12-21

    Angina pectoris is common in patients with heart failure and reduced ejection fraction (HF-REF) but its relationship with outcomes has not been well defined. This relationship was investigated further in a retrospective analysis of the Controlled Rosuvastatin Multinational Trial in Heart Failure (CORONA). Four thousand, eight hundred and seventy-eight patients were divided into three categories: no history of angina and no chest pain at baseline (Group A; n = 1240), past history of angina but no chest pain at baseline (Group B; n = 1353) and both a history of angina and chest pain at baseline (Group C; n = 2285). Outcomes were examined using Kaplan-Meier and Cox regression survival analysis. Compared with Group A, Group C had a higher risk of non-fatal myocardial infarction or unstable angina (HR: 2.36, 1.54-3.61; P < 0.001), this composite plus coronary revascularization (HR: 2.54, 1.76-3.68; P < 0.001), as well as HF hospitalization (HR: 1.35, 1.13-1.63; P = 0.001), over a median follow-up period of 33 months. There was no difference in cardiovascular or all-cause mortality. Group B had a smaller increase in risk of coronary events but not of heart failure hospitalization. Patients with HF-REF and ongoing angina are at an increased risk of acute coronary syndrome and HF hospitalization. Whether these patients would benefit from more aggressive medical therapy or percutaneous revascularization is not known and merits further investigation. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2014. For permissions please email: journals.permissions@oup.com.

  16. Testicular failure

    MedlinePlus

    ... Testicular failure occurs when the testicles cannot produce sperm or male hormones, such as testosterone. Causes Testicular ... semen analysis to examine the number of healthy sperm you are producing. Sometimes, an ultrasound of the ...

  17. Ferrographic and spectrometer oil analysis from a failed gas turbine engine

    NASA Technical Reports Server (NTRS)

    Jones, W. R., Jr.

    1982-01-01

    An experimental gas turbine engine was destroyed as a result of the combustion of its titanium components. It was concluded that a severe surge may have caused interference between rotating and stationary compressor that either directly or indirectly ignited the titanium components. Several engine oil samples (before and after the failure) were analyzed with a Ferrograph, a plasma, an atomic absorption, and an emission spectrometer to see if this information would aid in the engine failure diagnosis. The analyses indicated that a lubrication system failure was not a causative factor in the engine failure. Neither an abnormal wear mechanism nor a high level of wear debris was detected in the engine oil sample taken just prior to the test in which the failure occurred. However, low concentrations (0.2 to 0.5 ppm) of titanium were evident in this sample and samples taken earlier. After the failure, higher titanium concentrations ( 2 ppm) were detected in oil samples taken from different engine locations. Ferrographic analysis indicated that most of the titanium was contained in spherical metallic debris after the failure. The oil analyses eliminated a lubrication system bearing or shaft seal failure as the cause of the engine failure.

  18. [Diagnostic value of serum procalcitonin in identifying the etiology of non-responding community-acquired pneumonia after initial antibiotic therapy].

    PubMed

    Wang, Zheng; Zhang, Xiaoju; Wu, Jizhen; Zhang, Wenping; Kuang, Hongyan; Li, Xiao; Xuan, Weixia; Wang, Kai; Ma, Lijun

    2014-11-01

    This study was to investigate the diagnostic value of serum procalcitonin(PCT) in identifying the etiology of non-responding community-acquired pneumonia (CAP) after initial antibiotic therapy. A retrospective analysis was performed for 232 hospitalized CAP patients admitted to the People's Hospital of Zhengzhou University during June 2013 and January 2014. Early treatment failure was defined as the presence of persistent fever (>38 °C) and/or clinical symptoms (malaise, cough, expectoration, dyspnea) or deterioration after at least 72 h of initial antimicrobial treatment, or development of respiratory failure requiring mechanical ventilation, or septic shock. Bronchoscopy or transthoracic lung biopsy was performed in case of early treatment failure when indicated. Serum level of PCT was detected by double antibody sandwich method. The differences between 2 or more groups were compared using 2-independent student t test, one-way ANOVA; Mann-Whitney U test, Kruskal-Wallis rank sum test, or χ(2) test. Risk factors and odds ratios for nonresponsiveness were analyzed by setting up a Logistic regression model. The diagnostic values of PCT were determined by receiver operating characteristic curves (ROC curves). Of the 232 CAP patients enrolled, 124 were male and 108 were female, with an average age of (46 ± 20) years. Thirty-six patients failed to respond to the initial antibiotic therapy. As shown by Logistic regression analysis, the risk factors for treatment failure included hypoalbuminemia, type 2 diabetes, previous history of splenectomy , PSI 4-5 grade, and lung infiltration ≥ 3 lobes. The most common causes of non-responsiveness were antimicrobial insufficiency (n = 23), and misdiagnosis of noninfectious mimics of pneumonia (n = 11), with 2 cases of unidentified etiology. The serum PCT level in admission was 0.19 (0.07-0.66) µg/L in the antimicrobial insufficiency subgroup, which was significantly higher than that in the misdiagnosis subgroup [0.06(0.05-0.08)µg/L; P < 0.01]. The antimicrobial insufficiency subgroup included 11 cases of bacterial infection (5 of G(+) cocci and 6 of G(-) bacilli) and 12 cases of nonbacterial infection; their PCT levels were 0.66(0.19-5.80) µg/L and 0.08(0.05-0.20) µg/L, respectively (P < 0.01). There was no statistically significant difference among PCT levels of the 4 subgroups of nonbacterial infections (4 tuberculosis, 3 fungi, 3 atypical pathogens, 2 viruses) (F = 3.025, P = 0.094). The cut-off values of PCT were >0.13 µg/L and >0.115 µg/L for differentiating non-responsiveness originated from bacterial infection or other causes, and infection vs non-infection, which yielded a sensitivity of 100% (11/11) and 65% (14/23) , specificity of 83% (19/23) and 91% (10/11) , and AUC of 0.955 and 0.802, respectively. Antibiotic failure to cover the microbial pathogens, infectious complications and misdiagnosis are the most common causes of early treatment failure in patients with CAP. Serum PCT level fails to predict non-responsiveness, but is suggestive of bacterial infections in hospitalized CAP patients with early treatment failure.

  19. Random safety auditing, root cause analysis, failure mode and effects analysis.

    PubMed

    Ursprung, Robert; Gray, James

    2010-03-01

    Improving quality and safety in health care is a major concern for health care providers, the general public, and policy makers. Errors and quality issues are leading causes of morbidity and mortality across the health care industry. There is evidence that patients in the neonatal intensive care unit (NICU) are at high risk for serious medical errors. To facilitate compliance with safe practices, many institutions have established quality-assurance monitoring procedures. Three techniques that have been found useful in the health care setting are failure mode and effects analysis, root cause analysis, and random safety auditing. When used together, these techniques are effective tools for system analysis and redesign focused on providing safe delivery of care in the complex NICU system. Copyright 2010 Elsevier Inc. All rights reserved.

  20. Failure Analysis of CCD Image Sensors Using SQUID and GMR Magnetic Current Imaging

    NASA Technical Reports Server (NTRS)

    Felt, Frederick S.

    2005-01-01

    During electrical testing of a Full Field CCD Image Senor, electrical shorts were detected on three of six devices. These failures occurred after the parts were soldered to the PCB. Failure analysis was performed to determine the cause and locations of these failures on the devices. After removing the fiber optic faceplate, optical inspection was performed on the CCDs to understand the design and package layout. Optical inspection revealed that the device had a light shield ringing the CCD array. This structure complicated the failure analysis. Alternate methods of analysis were considered, including liquid crystal, light and thermal emission, LT/A, TT/A SQUID, and MP. Of these, SQUID and MP techniques were pursued for further analysis. Also magnetoresistive current imaging technology is discussed and compared to SQUID.

  1. STS-3 main parachute failure

    NASA Technical Reports Server (NTRS)

    Runkle, R.; Henson, K.

    1982-01-01

    A failure analysis of the parachute on the Space Transportation System 3 flight's solid rocket booster's is presented. During the reentry phase of the two Solid Rocket Boosters (SRBs), one 115 ft diameter main parachute failed on the right hand SRB (A12). This parachute failure caused the SRB to impact the Ocean at 110 ft/sec in lieu of the expected 3 parachute impact velocity of 88 ft/sec. This higher impact velocity relates directly to more SRB aft skirt and more motor case damage. The cause of the parachute failure, the potential risks of losing an SRB as a result of this failure, and recommendations to ensure that the probability of chute failures of this type in the future will be low are discussed.

  2. Beethoven's terminal illness and death.

    PubMed

    Mai, F M M

    2006-10-01

    There is dispute about the cause of Beethoven's death; alcoholic cirrhosis, syphilis, infectious hepatitis, lead poisoning, sarcoidosis and Whipple's disease have all been proposed. In this article all primary source documents related to Beethoven's terminal illness and death are reviewed. The documents include his letters, the report of his physician Andreas Wawruch, his Conversation Books, the autopsy report, and a new toxicological report of his hair. His terminal illness was characterised by jaundice, ascites, ankle oedema and abdominal pain. The autopsy data indicate that Beethoven had cirrhosis of the liver, and probably also renal papillary necrosis, pancreatitis and possibly diabetes mellitus. His lifestyle for at least the final decade of his life indicated that he overindulged in alcohol in the form of wine. Alcohol was by far the most common cause of cirrhosis at that period. Toxicological analysis of his hair showed that the level of lead was elevated. During the eighteenth and early nineteenth centuries, lead was added illegally to inexpensive wines to sweeten and refresh them. These findings strongly suggest that liver failure secondary to alcoholic cirrhosis, associated with terminal spontaneous bacterial peritonitis, was the cause of death. This was complicated in the end stages by renal failure. If the presence of endogenous lead was verified by analysis of Beethoven's skeletal remains, it would suggest that the lead was derived from wine that he drank. Lead poisoning may account for some of his end-of-life symptoms. There is little clinical or autopsy evidence that Beethoven suffered from syphilis.

  3. A retrospective survey of the causes of bracket- and tube-bonding failures.

    PubMed

    Roelofs, Tom; Merkens, Nico; Roelofs, Jeroen; Bronkhorst, Ewald; Breuning, Hero

    2017-01-01

    To investigate the causes of bonding failures of orthodontic brackets and tubes and the effect of premedicating for saliva reduction. Premedication with atropine sulfate was administered randomly. Failure rate of brackets and tubes placed in a group of 158 consecutive patients was evaluated after a mean period of 67 weeks after bonding. The failure rate in the group without atropine sulfate premedication was 2.4%. In the group with premedication, the failure rate was 2.7%. The Cox regression analysis of these groups showed that atropine application did not lead to a reduction in bond failures. Statistically significant differences in the hazard ratio were found for the bracket regions and for the dental assistants who prepared for the bonding procedure. Premedication did not lead to fewer bracket failures. The roles of the dental assistant and patient in preventing failures was relevant. A significantly higher failure rate for orthodontic appliances was found in the posterior regions.

  4. GPS-Based Excavation Encroachment Notification

    DOT National Transportation Integrated Search

    2011-10-31

    Excavation damage is the primary threat to the integrity of the natural gas distribution system. According to the Common Ground Alliance, the two primary root causes of excavation damage are failure to notify the one-call center and careless excavati...

  5. Development of an Ontology to Model Medical Errors, Information Needs, and the Clinical Communication Space

    PubMed Central

    Stetson, Peter D.; McKnight, Lawrence K.; Bakken, Suzanne; Curran, Christine; Kubose, Tate T.; Cimino, James J.

    2002-01-01

    Medical errors are common, costly and often preventable. Work in understanding the proximal causes of medical errors demonstrates that systems failures predispose to adverse clinical events. Most of these systems failures are due to lack of appropriate information at the appropriate time during the course of clinical care. Problems with clinical communication are common proximal causes of medical errors. We have begun a project designed to measure the impact of wireless computing on medical errors. We report here on our efforts to develop an ontology representing the intersection of medical errors, information needs and the communication space. We will use this ontology to support the collection, storage and interpretation of project data. The ontology’s formal representation of the concepts in this novel domain will help guide the rational deployment of our informatics interventions. A real-life scenario is evaluated using the ontology in order to demonstrate its utility.

  6. Failed medial patellofemoral ligament reconstruction: Causes and surgical strategies

    PubMed Central

    Sanchis-Alfonso, Vicente; Montesinos-Berry, Erik; Ramirez-Fuentes, Cristina; Leal-Blanquet, Joan; Gelber, Pablo E; Monllau, Joan Carles

    2017-01-01

    Patellar instability is a common clinical problem encountered by orthopedic surgeons specializing in the knee. For patients with chronic lateral patellar instability, the standard surgical approach is to stabilize the patella through a medial patellofemoral ligament (MPFL) reconstruction. Foreseeably, an increasing number of revision surgeries of the reconstructed MPFL will be seen in upcoming years. In this paper, the causes of failed MPFL reconstruction are analyzed: (1) incorrect surgical indication or inappropriate surgical technique/patient selection; (2) a technical error; and (3) an incorrect assessment of the concomitant risk factors for instability. An understanding of the anatomy and biomechanics of the MPFL and cautiousness with the imaging techniques while favoring clinical over radiological findings and the use of common sense to determine the adequate surgical technique for each particular case, are critical to minimizing MPFL surgery failure. Additionally, our approach to dealing with failure after primary MPFL reconstruction is also presented. PMID:28251062

  7. Metallurgical Analysis of Cracks Formed on Coal Fired Boiler Tube

    NASA Astrophysics Data System (ADS)

    Kishor, Rajat; Kyada, Tushal; Goyal, Rajesh K.; Kathayat, T. S.

    2015-02-01

    Metallurgical failure analysis was carried out for cracks observed on the outer surface of a boiler tube made of ASME SA 210 GR A1 grade steel. The cracks on the surface of the tube were observed after 6 months from the installation in service. A careful visual inspection, chemical analysis, hardness measurement, detailed microstructural analysis using optical and scanning electron microscopy coupled with energy dispersive X-ray spectroscopy were carried out to ascertain the cause for failure. Visual inspection of the failed tube revealed the presence of oxide scales and ash deposits on the surface of the tube exposed to fire. Many cracks extending longitudinally were observed on the surface of the tube. Bulging of the tube was also observed. The results of chemical analysis, hardness values and optical micrographs did not exhibit any abnormality at the region of failure. However, detailed SEM with EDS analysis confirmed the presence of various oxide scales. These scales initiated corrosion at both the inner and outer surfaces of the tube. In addition, excessive hoop stress also developed at the region of failure. It is concluded that the failure of the boiler tube took place owing to the combined effect of the corrosion caused by the oxide scales as well as the excessive hoop stress.

  8. Which cause of diffuse peritonitis is the deadliest in the tropics? A retrospective analysis of 305 cases from the South-West Region of Cameroon.

    PubMed

    Chichom-Mefire, Alain; Fon, Tabe Alain; Ngowe-Ngowe, Marcelin

    2016-01-01

    Acute diffuse peritonitis is a common surgical emergency worldwide and a major contributor to non-trauma related death toll. Its causes vary widely and are correlated with mortality. Community acquired peritonitis seems to play a major role and is frequently related to hollow viscus perforation. Data on the outcome of peritonitis in the tropics are scarce. The aim of this study is to analyze the impact of tropic latitude causes of diffuse peritonitis on morbidity and mortality. We retrospectively reviewed the records of 305 patients operated on for a diffuse peritonitis in two regional hospitals in the South-West Region of Cameroon over a 7 years period. The contributions of various causes of peritonitis to morbidity and mortality were analyzed. The diagnosis of diffuse peritonitis was suggested on clinical ground only in more than 93 % of cases. The most common causes of diffuse peritonitis included peptic ulcer perforation (n = 69), complications of acute appendicitis (n = 53) and spontaneous perforations of the terminal ileum (n = 43). A total of 142 complications were recorded in 96 patients (31.5 % complication rate). The most common complications included wound dehiscence, sepsis, prolonged paralytic ileus and multi-organ failure. Patients with typhoid perforation of the terminal ileum carried a significantly higher risk of developing a complication (p = 0.002). The overall mortality rate was 15.1 %. The most common cause of death was septic shock. Differential analysis of mortality of various causes of peritonitis indicated that the highest contributors to death toll were typhoid perforation of terminal ileum (34.7 % of deaths), post-operative peritonitis (19.5 %) and peptic ulcer perforation (15.2 %). The diagnosis of diffuse peritonitis can still rely on clinical assessment alone in the absence of sophisticated imaging tools. Peptic ulcer and typhoid perforations are still major contributors to death toll. Patients presenting with these conditions require specific attention and prevention policies must be reinforced.

  9. Vulnerability Management for an Enterprise Resource Planning System

    NASA Astrophysics Data System (ADS)

    Goel, Shivani; Kiran, Ravi; Garg, Deepak

    2012-09-01

    Enterprise resource planning (ERP) systems are commonly used in technical educational institutions(TEIs). ERP systems should continue providing services to its users irrespective of the level of failure. There could be many types of failures in the ERP systems. There are different types of measures or characteristics that can be defined for ERP systems to handle the levels of failure. Here in this paper, various types of failure levels are identified along with various characteristics which are concerned with those failures. The relation between all these is summarized. The disruptions causing vulnerabilities in TEIs are identified .A vulnerability management cycle has been suggested along with many commercial and open source vulnerability management tools. The paper also highlights the importance of resiliency in ERP systems in TEIs.

  10. Enhancing the Possibility of Success by Measuring the Probability of Failure in an Educational Program.

    ERIC Educational Resources Information Center

    Brookhart, Susan M.; And Others

    1997-01-01

    Process Analysis is described as a method for identifying and measuring the probability of events that could cause the failure of a program, resulting in a cause-and-effect tree structure of events. The method is illustrated through the evaluation of a pilot instructional program at an elementary school. (SLD)

  11. Causes of death in peritoneal dialysis patients with different kidney diseases and comorbidities: a retrospective clinical analysis in a Chinese center.

    PubMed

    Zhang, Qianying; Ren, Hong; Xie, Jingyuan; Li, Xiao; Huang, Xiaomin; Chen, Nan

    2014-06-01

    The objective of the study is to identify and compare the different causes of death among peritoneal dialysis (PD) patients varying in baseline characteristics, including gender, age, primary diseases, and comorbidities and to assess risk factors for first-year death. The clinical data of 179 PD patients who were regularly followed up in our hospital and died between January 2006 and February 2011 were retrospectively reviewed. Median age at PD catheter implantation was 73 years. The most common primary diseases leading to ESRD were diabetic nephropathy (DN; 26.3 %), chronic glomerulonephritis (CGN; 24.6 %), and hypertensive nephropathy (HN; 21.8 %). The main causes of death in the DN and CGN groups were infections (42.6 %) and cardiocerebrovascular accidents (34.1 %), respectively. Patients with systemic vasculitis (SV) had the highest mortality rate from infection (71.4 %). Cox regression model showed that, compared with patients with CGN, those who had primary disease of DN, renal amyloidosis, multiple myeloma, or vasculitis were at higher risk of first-year death. Cerebrovascular disease, chronic heart failure, and/or lower serum albumin at baseline were also risk factors for first-year death. The main causes of death in PD patients with DN and CGN were infections and cardiocerebrovascular accidents, respectively. Risk factors for first-year death included the primary diseases, cerebrovascular diseases, chronic heart failure, and lower serum albumin at baseline.

  12. A mobile system for the improvement of heart failure management: Evaluation of a prototype.

    PubMed

    Haynes, Sarah C; Kim, Katherine K

    2017-01-01

    Management of heart failure is complex, often involving interaction with multiple providers, monitoring of symptoms, and numerous medications. Employing principles of user-centered design, we developed a high- fidelity prototype of a mobile system for heart failure self-management and care coordination. Participants, including both heart failure patients and health care providers, tested the mobile system during a one-hour one-on-one session with a facilitator. The facilitator interviewed participants about the strengths and weaknesses of the prototype, necessary features, and willingness to use the technology. We performed a qualitative content analysis using the transcripts of these interviews. Fourteen distinct themes were identified in the analysis. Of these themes, integration, technology literacy, memory, and organization were the most common. Privacy was the least common theme. Our study suggests that this integration is essential for adoption of a mobile system for chronic disease management and care coordination.

  13. Evaluation of control parameters for Spray-In-Air (SIA) aqueous cleaning for shuttle RSRM hardware

    NASA Technical Reports Server (NTRS)

    Davis, S. J.; Deweese, C. D.

    1995-01-01

    HD-2 grease is deliberately applied to Shuttle Redesigned Solid Rocket Motor (RSRM) D6AC steel hardware parts as a temporary protective coating for storage and shipping. This HD-2 grease is the most common form of surface contamination on RSRM hardware and must be removed prior to subsequent surface treatment. Failure to achieve an acceptable level of cleanliness (HD-2 calcium grease removal) is a common cause of defect incidence. Common failures from ineffective cleaning include poor adhesion of surface coatings, reduced bond performance of structural adhesives, and failure to pass cleanliness inspection standards. The RSRM hardware is currently cleaned and refurbished using methyl chloroform (1,1,1-trichloroethane). This chlorinated solvent is mandated for elimination due to its ozone depleting characteristics. This report describes an experimental study of an aqueous cleaning system (which uses Brulin 815 GD) as a replacement for methyl chloroform. Evaluation of process control parameters for this cleaner are discussed as well as cleaning mechanisms for a spray-in-air process.

  14. Failure Investigation of Radiant Platen Superheater Tube of Thermal Power Plant Boiler

    NASA Astrophysics Data System (ADS)

    Ghosh, D.; Ray, S.; Mandal, A.; Roy, H.

    2015-04-01

    This paper highlights a case study of typical premature failure of a radiant platen superheater tube of 210 MW thermal power plant boiler. Visual examination, dimensional measurement and chemical analysis, are conducted as part of the investigations. Apart from these, metallographic analysis and fractography are also conducted to ascertain the probable cause of failure. Finally it has been concluded that the premature failure of the super heater tube can be attributed to localized creep at high temperature. The corrective actions has also been suggested to avoid this type of failure in near future.

  15. Failure Analysis of PRDS Pipe in a Thermal Power Plant Boiler

    NASA Astrophysics Data System (ADS)

    Ghosh, Debashis; Ray, Subrata; Mandal, Jiten; Mandal, Nilrudra; Shukla, Awdhesh Kumar

    2018-04-01

    The pressure reducer desuperheater (PRDS) pipeline is used for reducing the pressure and desuperheating of the steam in different auxiliary pipeline. When the PRDS pipeline is failed, the reliability of the boiler is affected. This paper investigates the probable cause/causes of failure of the PRDS tapping line. In that context, visual inspection, outside diameter and wall thickness measurement, chemical analysis, metallographic examination and hardness measurement are conducted as part of the investigative studies. Apart from these tests, mechanical testing and fractographic analysis are also conducted as supplements. Finally, it has been concluded that the PRDS pipeline has mainly failed due to graphitization due to prolonged exposure of the pipe at higher temperature. The improper material used is mainly responsible for premature failure of the pipe.

  16. Stress Transfer and Structural Failure of Bilayered Material Systems

    NASA Astrophysics Data System (ADS)

    Prieto-Munoz, Pablo Arthur

    Bilayered material systems are common in naturally formed or artificially engineered structures. Understanding how loads transfer within these structural systems is necessary to predict failure and develop effective designs. Existing methods for evaluating the stress transfer in bilayered materials are limited to overly simplified models or require experimental calibration. As a result, these methods have failed to accurately account for such structural failures as the creep induced roofing panel collapse of Boston's I-90 connector tunnel, which was supported by adhesive anchors. The one-dimensional stress analyses currently used for adhesive anchor design cannot account for viscoelastic creep failure, and consequently results in dangerously under-designed structural systems. In this dissertation, a method for determining the two-dimensional stress and displacement fields for a generalized bilayered material system is developed, and proposes a closed-form analytical solution. A general linear-elastic solution is first proposed by decoupling the elastic governing equations from one another through the so-called plane assumption. Based on this general solution, an axisymmetric problem and a plane strain problem are formulated. These are applied to common bilayered material systems such as: (1) concrete adhesive anchors, (2) material coatings, (3) asphalt pavements, and (4) layered sedimentary rocks. The stress and displacement fields determined by this analytical analysis are validated through the use of finite element models. Through the correspondence principle, the linear-elastic solution is extended to consider time-dependent viscoelastic material properties, thus facilitating the analysis of adhesive anchors and asphalt pavements while incorporating their viscoelastic material behavior. Furthermore, the elastic stress analysis can explain the fracturing phenomenon of material coatings, pavements, and layered rocks, successfully predicting their fracture saturation ratio---which is the ratio of fracture spacing to the thickness of the weak layer where an increase in load will not cause any new fractures to form. Moreover, these specific material systems are looked at in the context of existing and novel experimental results, further demonstrating the advantage of the stress transfer analysis proposed. This research provides a closed-form stress solution for various structural systems that is applied to different failure analyses. The versatility of this method is in the flexibility and the ease upon which the stress and displacement field results can be applied to existing stress- or displacement-based structural failure criteria. As presented, this analysis can be directly used to: (1) design adhesive anchoring systems for long-term creep loading, (2) evaluate the fracture mechanics behind bilayered material coatings and pavement overlay systems, and (3) determine the fracture spacing to layer thickness ratio of layered sedimentary rocks. As is shown in the four material systems presented, this general solution has far reaching applications in facilitating design and analysis of typical bilayered structural systems.

  17. Compounding effects of sea level rise and fluvial flooding.

    PubMed

    Moftakhari, Hamed R; Salvadori, Gianfausto; AghaKouchak, Amir; Sanders, Brett F; Matthew, Richard A

    2017-09-12

    Sea level rise (SLR), a well-documented and urgent aspect of anthropogenic global warming, threatens population and assets located in low-lying coastal regions all around the world. Common flood hazard assessment practices typically account for one driver at a time (e.g., either fluvial flooding only or ocean flooding only), whereas coastal cities vulnerable to SLR are at risk for flooding from multiple drivers (e.g., extreme coastal high tide, storm surge, and river flow). Here, we propose a bivariate flood hazard assessment approach that accounts for compound flooding from river flow and coastal water level, and we show that a univariate approach may not appropriately characterize the flood hazard if there are compounding effects. Using copulas and bivariate dependence analysis, we also quantify the increases in failure probabilities for 2030 and 2050 caused by SLR under representative concentration pathways 4.5 and 8.5. Additionally, the increase in failure probability is shown to be strongly affected by compounding effects. The proposed failure probability method offers an innovative tool for assessing compounding flood hazards in a warming climate.

  18. The pharmacotherapy of the HeartMate II, a continuous flow left ventricular assist device, in patients with advanced heart failure: integration of disease, device, and drug.

    PubMed

    Jennings, Douglas L; Chambers, Rachel M; Schillig, Jessica M

    2010-10-01

    Advanced heart failure continues to be a significant cause of morbidity and mortality in the US. Patients with advanced heart failure have a poor prognosis without cardiac transplantation. The use of left ventricular assist devices (LVADs) as destination therapy for these patients is therefore expected to increase in the coming years as technology advances. The HeartMate II, a continuous flow implantable device, is currently the only LVAD that has been approved by the Food and Drug Administration for destination therapy in patients with advanced heart failure. The pharmacotherapy associated with this device is very complex and, therefore, the need for expertly trained clinical pharmacists to care for this expanding patient population will also likely increase. Unfortunately, most pharmacists are unfamiliar with the effect of LVADs on the physiology and pharmacotherapy of a patient's heart failure. The purpose of this article is to give clinical pharmacists an introduction to the most common pharmacotherapeutic issues for patients with LVADs and present practical solutions for managing common drug therapy problems.

  19. Evaluation and treatment of failed shoulder instability procedures.

    PubMed

    Ho, Anthony G; Gowda, Ashok L; Michael Wiater, J

    2016-09-01

    Management of the unstable shoulder after a failed stabilization procedure can be difficult and challenging. Detailed understanding of the native shoulder anatomy, including its static and dynamic restraints, is necessary for determining the patient's primary pathology. In addition, evaluation of the patient's history, physical exam, and imaging is important for identifying the cause for failure after the initial procedure. Common mistakes include under-appreciation of bony defects, failure to recognize capsular laxity, technical errors, and missed associated pathology. Many potential treatment options exist for revision surgery, including open or arthroscopic Bankart repair, bony augmentation procedures, and management of Hill Sachs defects. The aim of this narrative review is to discuss in-depth the common risk factors for post-surgical failure, components for appropriate evaluation, and the different surgical options available for revision stabilization. Level of evidence Level V.

  20. Mitigation of commutation failures in LCC-HVDC systems based on superconducting fault current limiters

    NASA Astrophysics Data System (ADS)

    Lee, Jong-Geon; Khan, Umer Amir; Lee, Ho-Yun; Lim, Sung-Woo; Lee, Bang-Wook

    2016-11-01

    Commutation failure in line commutated converter based HVDC systems cause severe damages on the entire power grid system. For LCC-HVDC, thyristor valves are turned on by a firing signal but turn off control is governed by the external applied AC voltage from surrounding network. When the fault occurs in AC system, turn-off control of thyristor valves is unavailable due to the voltage collapse of point of common coupling (PCC), which causes the commutation failure in LCC-HVDC link. Due to the commutation failure, the power transfer interruption, dc voltage drop and severe voltage fluctuation in the AC system could be occurred. In a severe situation, it might cause the protection system to block the valves. In this paper, as a solution to prevent the voltage collapse on PCC and to limit the fault current, the application study of resistive superconducting fault current limiter (SFCL) on LCC-HVDC grid system was performed with mathematical and simulation analyses. The simulation model was designed by Matlab/Simulink considering Haenam-Jeju HVDC power grid in Korea which includes conventional AC system and onshore wind farm and resistive SFCL model. From the result, it was observed that the application of SFCL on LCC-HVDC system is an effective solution to mitigate the commutation failure. And then the process to determine optimum quench resistance of SFCL which enables the recovery of commutation failure was deeply investigated.

  1. Causes and Temporal Patterns of 30-Day Readmission Among Older Adults Hospitalized With Heart Failure With Preserved or Reduced Ejection Fraction.

    PubMed

    Goyal, Parag; Loop, Matthew; Chen, Ligong; Brown, Todd M; Durant, Raegan W; Safford, Monika M; Levitan, Emily B

    2018-04-23

    It is unknown whether causes and temporal patterns of 30-day readmission vary between heart failure (HF) with preserved ejection fraction (HFpEF) and HF with reduced ejection fraction (HFrEF). We sought to address this question by examining a 5% national sample of Medicare beneficiaries. We included individuals who experienced a hospitalization for HFpEF or HFrEF between 2007 and 2013. We identified causes of 30-day readmission based on primary discharge diagnosis and further classified causes of readmission as HF-related, non-HF cardiovascular-related, and non-cardiovascular-related. We calculated the cumulative incidence of these classifications for HFpEF and HFrEF in a competing risks model and calculated subdistribution hazard ratios of these classifications by comparing those with HFpEF and those with HFrEF. Among 60 640 Medicare beneficiaries, we identified 13 785 unique older adults hospitalized with HFpEF and 15 205 who were hospitalized with HFrEF. Noncardiovascular diagnoses represented the most common causes of 30-day readmission (HFpEF: 59%; HFrEF: 47%), a pattern that was observed for each week of the 30-day study period for both HFpEF and HFrEF participants. In comparing readmission diagnoses in an adjusted model, non-cardiovascular-related diagnoses were more common and HF-related diagnoses were less common in HFpEF participants. Non-cardiovascular-related diagnoses represented the most common causes of 30-day readmission following HF hospitalization for each week of the 30-day postdischarge period. HF diagnoses were less common among those with HFpEF compared with HFrEF. Future interventions aimed at reducing 30-day readmissions following an HF hospitalization would benefit from an increased focus on noncardiovascular comorbidity and interventions that target HFpEF and HFrEF separately. © 2018 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

  2. 28 CFR 301.309 - In-person hearing before the committee.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... time set for that hearing, show good cause for failure to appear. (b) In conducting the hearing, the Committee is not bound by common law or statutory rules of evidence, or by technical or formal rules of...

  3. 28 CFR 301.309 - In-person hearing before the committee.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... time set for that hearing, show good cause for failure to appear. (b) In conducting the hearing, the Committee is not bound by common law or statutory rules of evidence, or by technical or formal rules of...

  4. Contemporary Insights and Novel Treatment Approaches to Central Sleep Apnea Syndrome in Heart Failure

    PubMed Central

    Grayburn, Ryan L.; Kaka, Yaquta; Wilson Tang, W. H.

    2014-01-01

    Opinion Statement Central sleep apnea (CSA) is a common and under-diagnosed condition commonly associated with Cheyne-Stokes respiration. It is particularly prevalent in the heart failure population affecting up to 40% of all patients with heart failure. The pathophysiology associated with CSA is based on the underlying effects of hypoventilation and hyperventilation, with neurologic dysregulation of respiratory control as the primary defect. However, therapeutic options are limited due to the prevailing perception that CSA is a consequence, rather than cause of morbidity and mortality. At present, the main focus remains treating the underlying problem (ie intensifying heart failure therapeutics, decongestion), while additional suggestions of using acetazolamide, progesterone, nocturnal oxygen, and theophylline have not been validated with contemporary clinical trials. Positive pressure ventilation is currently the primary recommendation for all patients with sleep-disordered breathing (CSA included), and in some patients may effectively reduce the apnea-hypopnea index. However, significant research is ongoing to determine how to treat this complex patient population. PMID:24874028

  5. Simplified methods for evaluating road prism stability

    Treesearch

    William J. Elliot; Mark Ballerini; David Hall

    2003-01-01

    Mass failure is one of the most common failures of low-volume roads in mountainous terrain. Current methods for evaluating stability of these roads require a geotechnical specialist. A stability analysis program, XSTABL, was used to estimate the stability of 3,696 combinations of road geometry, soil, and groundwater conditions. A sensitivity analysis was carried out to...

  6. Serum Irisin Predicts Mortality Risk in Acute Heart Failure Patients.

    PubMed

    Shen, Shutong; Gao, Rongrong; Bei, Yihua; Li, Jin; Zhang, Haifeng; Zhou, Yanli; Yao, Wenming; Xu, Dongjie; Zhou, Fang; Jin, Mengchao; Wei, Siqi; Wang, Kai; Xu, Xuejuan; Li, Yongqin; Xiao, Junjie; Li, Xinli

    2017-01-01

    Irisin is a peptide hormone cleaved from a plasma membrane protein fibronectin type III domain containing protein 5 (FNDC5). Emerging studies have indicated association between serum irisin and many major chronic diseases including cardiovascular diseases. However, the role of serum irisin as a predictor for mortality risk in acute heart failure (AHF) patients is not clear. AHF patients were enrolled and serum was collected at the admission and all patients were followed up for 1 year. Enzyme-linked immunosorbent assay was used to measure serum irisin levels. To explore predictors for AHF mortality, the univariate and multivariate logistic regression analysis, and receiver-operator characteristic (ROC) curve analysis were used. To determine the role of serum irisin levels in predicting survival, Kaplan-Meier survival analysis was used. In this study, 161 AHF patients were enrolled and serum irisin level was found to be significantly higher in patients deceased in 1-year follow-up. The univariate logistic regression analysis identified 18 variables associated with all-cause mortality in AHF patients, while the multivariate logistic regression analysis identified 2 variables namely blood urea nitrogen and serum irisin. ROC curve analysis indicated that blood urea nitrogen and the most commonly used biomarker, NT-pro-BNP, displayed poor prognostic value for AHF (AUCs ≤ 0.700) compared to serum irisin (AUC = 0.753). Kaplan-Meier survival analysis demonstrated that AHF patients with higher serum irisin had significantly higher mortality (P<0.001). Collectively, our study identified serum irisin as a predictive biomarker for 1-year all-cause mortality in AHF patients though large multicenter studies are highly needed. © 2017 The Author(s). Published by S. Karger AG, Basel.

  7. Failure analysis of a tool steel torque shaft

    NASA Technical Reports Server (NTRS)

    Reagan, J. R.

    1981-01-01

    A low design load drive shaft used to deliver power from an experimental exhaust heat recovery system to the crankshaft of an experimental diesel truck engine failed during highway testing. An independent testing laboratory analyzed the failure by routine metallography and attributed the failure to fatigue induced by a banded microstructure. Visual examination by NASA of the failed shaft plus the knowledge of the torsional load that it carried pointed to a 100 percent ductile failure with no evidence of fatigue. Scanning electron microscopy confirmed this. Torsional test specimens were produced from pieces of the failed shaft and torsional overload testing produced identical failures to that which had occurred in the truck engine. This pointed to a failure caused by a high overload and although the microstructure was defective it was not the cause of the failure.

  8. The medical and socioeconomic burden of heart failure: A comparative delineation with cancer.

    PubMed

    Farmakis, Dimitrios; Stafylas, Panagiotis; Giamouzis, Gregory; Maniadakis, Nikolaos; Parissis, John

    2016-01-15

    Cardiovascular disease and cancer represent the two leading causes of death in the Western World. Still, cardiovascular disease causes more deaths and more hospitalizations than cancer. Although mortality rates of both conditions are generally declining, this is not true for heart failure (HF). The prevalence of HF is increasing, although its incidence has been stabilized, mainly because of the population aging. The survival of patients with HF is overall worse than those with cancer. In addition, HF failure is the most common reason for hospitalization in the elderly, while hospitalization for HF is followed by adverse prognosis and represents the main contributor to the huge financial expenditure caused by the syndrome. The outcome of HF patients and thus its medical and socioeconomic burden may be improved by the more efficient in-hospital management of patients, the enhancement of adherence to guideline-recommended therapies, the identification and treatment of comorbid conditions and the introduction of more effective medical therapies. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  9. Molecular cytogenetic analysis of Xq critical regions in premature ovarian failure

    PubMed Central

    2013-01-01

    Background One of the frequent reasons for unsuccessful conception is premature ovarian failure/primary ovarian insufficiency (POF/POI) that is defined as the loss of functional follicles below the age of 40 years. Among the genetic causes the most common one involves the X chromosome, as in Turner syndrome, partial X deletion and X-autosome translocations. Here we report a case of a 27-year-old female patient referred to genetic counselling because of premature ovarian failure. The aim of this case study to perform molecular genetic and cytogenetic analyses in order to identify the exact genetic background of the pathogenic phenotype. Results For premature ovarian failure disease diagnostics we performed the Fragile mental retardation 1 gene analysis using Southern blot technique and Repeat Primed PCR in order to identify the relationship between the Fragile mental retardation 1 gene premutation status and the premature ovarion failure disease. At this early onset, the premature ovarian failure affected patient we detected one normal allele of Fragile mental retardation 1 gene and we couldn’t verify the methylated allele, therefore we performed the cytogenetic analyses using G-banding and fluorescent in situ hybridization methods and a high resolution molecular cytogenetic method, the array comparative genomic hybridization technique. For this patient applying the G-banding, we identified a large deletion on the X chromosome at the critical region (ChrX q21.31-q28) which is associated with the premature ovarian failure phenotype. In order to detect the exact breakpoints, we used a special cytogenetic array ISCA plus CGH array and we verified a 67.355 Mb size loss at the critical region which include total 795 genes. Conclusions We conclude for this case study that the karyotyping is definitely helpful in the evaluation of premature ovarian failure patients, to identify the non submicroscopic chromosomal rearrangement, and using the array CGH technique we can contribute to the most efficient detection and mapping of exact deletion breakpoints of the deleted Xq region. PMID:24359613

  10. Safety and feasibility of STAT RAD: Improvement of a novel rapid tomotherapy-based radiation therapy workflow by failure mode and effects analysis.

    PubMed

    Jones, Ryan T; Handsfield, Lydia; Read, Paul W; Wilson, David D; Van Ausdal, Ray; Schlesinger, David J; Siebers, Jeffrey V; Chen, Quan

    2015-01-01

    The clinical challenge of radiation therapy (RT) for painful bone metastases requires clinicians to consider both treatment efficacy and patient prognosis when selecting a radiation therapy regimen. The traditional RT workflow requires several weeks for common palliative RT schedules of 30 Gy in 10 fractions or 20 Gy in 5 fractions. At our institution, we have created a new RT workflow termed "STAT RAD" that allows clinicians to perform computed tomographic (CT) simulation, planning, and highly conformal single fraction treatment delivery within 2 hours. In this study, we evaluate the safety and feasibility of the STAT RAD workflow. A failure mode and effects analysis (FMEA) was performed on the STAT RAD workflow, including development of a process map, identification of potential failure modes, description of the cause and effect, temporal occurrence, and team member involvement in each failure mode, and examination of existing safety controls. A risk probability number (RPN) was calculated for each failure mode. As necessary, workflow adjustments were then made to safeguard failure modes of significant RPN values. After workflow alterations, RPN numbers were again recomputed. A total of 72 potential failure modes were identified in the pre-FMEA STAT RAD workflow, of which 22 met the RPN threshold for clinical significance. Workflow adjustments included the addition of a team member checklist, changing simulation from megavoltage CT to kilovoltage CT, alteration of patient-specific quality assurance testing, and allocating increased time for critical workflow steps. After these modifications, only 1 failure mode maintained RPN significance; patient motion after alignment or during treatment. Performing the FMEA for the STAT RAD workflow before clinical implementation has significantly strengthened the safety and feasibility of STAT RAD. The FMEA proved a valuable evaluation tool, identifying potential problem areas so that we could create a safer workflow. Copyright © 2015 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

  11. Why total knees fail-A modern perspective review.

    PubMed

    Lum, Zachary C; Shieh, Alvin K; Dorr, Lawrence D

    2018-04-18

    Historically, the most common mechanism of total knee arthroplasty (TKA) failures included aseptic loosening, instability and malalignment. As polyethylene production improved, modes of failure from polyethylene wear and subsequent osteolysis became less prevalent. Newer longitudinal studies report that infection has become the primary acute cause of failure with loosening and instability remaining as the overall greatest reasons for revision. Clinical database and worldwide national registries confirm these reports. With an increasing amount of TKA operations performed in the United States, and with focus on value-based healthcare, it is imperative to understand why total knees fail.

  12. Comprehension and retrieval of failure cases in airborne observatories

    NASA Technical Reports Server (NTRS)

    Alvarado, Sergio J.; Mock, Kenrick J.

    1995-01-01

    This paper describes research dealing with the computational problem of analyzing and repairing failures of electronic and mechanical systems of telescopes in NASA's airborne observatories, such as KAO (Kuiper Airborne Observatory) and SOFIA (Stratospheric Observatory for Infrared Astronomy). The research has resulted in the development of an experimental system that acquires knowledge of failure analysis from input text, and answers questions regarding failure detection and correction. The system's design builds upon previous work on text comprehension and question answering, including: knowledge representation for conceptual analysis of failure descriptions, strategies for mapping natural language into conceptual representations, case-based reasoning strategies for memory organization and indexing, and strategies for memory search and retrieval. These techniques have been combined into a model that accounts for: (a) how to build a knowledge base of system failures and repair procedures from descriptions that appear in telescope-operators' logbooks and FMEA (failure modes and effects analysis) manuals; and (b) how to use that knowledge base to search and retrieve answers to questions about causes and effects of failures, as well as diagnosis and repair procedures. This model has been implemented in FANSYS (Failure ANalysis SYStem), a prototype text comprehension and question answering program for failure analysis.

  13. Comprehension and retrieval of failure cases in airborne observatories

    NASA Astrophysics Data System (ADS)

    Alvarado, Sergio J.; Mock, Kenrick J.

    1995-05-01

    This paper describes research dealing with the computational problem of analyzing and repairing failures of electronic and mechanical systems of telescopes in NASA's airborne observatories, such as KAO (Kuiper Airborne Observatory) and SOFIA (Stratospheric Observatory for Infrared Astronomy). The research has resulted in the development of an experimental system that acquires knowledge of failure analysis from input text, and answers questions regarding failure detection and correction. The system's design builds upon previous work on text comprehension and question answering, including: knowledge representation for conceptual analysis of failure descriptions, strategies for mapping natural language into conceptual representations, case-based reasoning strategies for memory organization and indexing, and strategies for memory search and retrieval. These techniques have been combined into a model that accounts for: (a) how to build a knowledge base of system failures and repair procedures from descriptions that appear in telescope-operators' logbooks and FMEA (failure modes and effects analysis) manuals; and (b) how to use that knowledge base to search and retrieve answers to questions about causes and effects of failures, as well as diagnosis and repair procedures. This model has been implemented in FANSYS (Failure ANalysis SYStem), a prototype text comprehension and question answering program for failure analysis.

  14. Packaging-induced failure of semiconductor lasers and optical telecommunications components

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sharps, J.A.

    1996-12-31

    Telecommunications equipment for field deployment generally have specified lifetimes of > 100,000 hr. To achieve this high reliability, it is common practice to package sensitive components in hermetic, inert gas environments. The intent is to protect components from particulate and organic contamination, oxidation, and moisture. However, for high power density 980 nm diode lasers used in optical amplifiers, the authors found that hermetic, inert gas packaging induced a failure mode not observed in similar, unpackaged lasers. They refer to this failure mode as packaging-induced failure, or PIF. PIF is caused by nanomole amounts of organic contamination which interact with highmore » intensity 980 nm light to form solid deposits over the emitting regions of the lasers. These deposits absorb 980 nm light, causing heating of the laser, narrowing of the band gap, and eventual thermal runaway. The authors have found PIF is averted by packaging with free O{sub 2} and/or a getter material that sequesters organics.« less

  15. Endocarditis in left ventricular assist device

    PubMed Central

    Thyagarajan, Braghadheeswar; Kumar, Monisha Priyadarshini; Sikachi, Rutuja R; Agrawal, Abhinav

    2016-01-01

    Summary Heart failure is one of the leading causes of death in developed nations. End stage heart failure often requires cardiac transplantation for survival. The left ventricular assist device (LVAD) has been one of the biggest evolvements in heart failure management often serving as bridge to transplant or destination therapy in advanced heart failure. Like any other medical device, LVAD is associated with complications with infections being reported in many patients. Endocarditis developing secondary to the placement of LVAD is not a frequent, serious and difficult to treat condition with high morbidity and mortality. Currently, there are few retrospective studies and case reports reporting the same. In our review, we found the most common cause of endocarditis in LVAD was due to bacteria. Both bacterial and fungal endocarditis were associated with high morbidity and mortality. In this review we will be discussing the risk factors, organisms involved, diagnostic tests, management strategies, complications, and outcomes in patients who developed endocarditis secondary to LVAD placement. PMID:27672540

  16. Statistical analysis of cascading failures in power grids

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chertkov, Michael; Pfitzner, Rene; Turitsyn, Konstantin

    2010-12-01

    We introduce a new microscopic model of cascading failures in transmission power grids. This model accounts for automatic response of the grid to load fluctuations that take place on the scale of minutes, when optimum power flow adjustments and load shedding controls are unavailable. We describe extreme events, caused by load fluctuations, which cause cascading failures of loads, generators and lines. Our model is quasi-static in the causal, discrete time and sequential resolution of individual failures. The model, in its simplest realization based on the Directed Current description of the power flow problem, is tested on three standard IEEE systemsmore » consisting of 30, 39 and 118 buses. Our statistical analysis suggests a straightforward classification of cascading and islanding phases in terms of the ratios between average number of removed loads, generators and links. The analysis also demonstrates sensitivity to variations in line capacities. Future research challenges in modeling and control of cascading outages over real-world power networks are discussed.« less

  17. Memory Circuit Fault Simulator

    NASA Technical Reports Server (NTRS)

    Sheldon, Douglas J.; McClure, Tucker

    2013-01-01

    Spacecraft are known to experience significant memory part-related failures and problems, both pre- and postlaunch. These memory parts include both static and dynamic memories (SRAM and DRAM). These failures manifest themselves in a variety of ways, such as pattern-sensitive failures, timingsensitive failures, etc. Because of the mission critical nature memory devices play in spacecraft architecture and operation, understanding their failure modes is vital to successful mission operation. To support this need, a generic simulation tool that can model different data patterns in conjunction with variable write and read conditions was developed. This tool is a mathematical and graphical way to embed pattern, electrical, and physical information to perform what-if analysis as part of a root cause failure analysis effort.

  18. Ferrographic and spectrometer oil analysis from a failed gas turbine engine

    NASA Technical Reports Server (NTRS)

    Jones, W. R., Jr.

    1983-01-01

    An experimental gas turbine engine was destroyed as a result of the combustion of its titanium components. It was concluded that a severe surge may have caused interference between rotating and stationary compressor parts that either directly or indirectly ignited the titanium components. Several engine oil samples (before and after the failure) were analyzed with a Ferrograph, and with plasma, atomic absorption, and emission spectrometers to see if this information would aid in the engine failure diagnosis. The analyses indicated that a lubrication system failure was not a causative factor in the engine failure. Neither an abnormal wear mechanism nor a high level of wear debris was detected in the engine oil sample taken just prior to the test in which the failure occurred. However, low concentrations (0.2 to 0.5 ppm) of titanium were evident in this sample and samples taken earlier. After the failure, higher titanium concentrations (2 ppm) were detected in oil samples taken from different engine locations. Ferrographic analysis indicated that most of the titanium was contained in spherical metallic debris after the failure. The oil analyses eliminated a lubrication system bearing or shaft seal failure as the cause of the engine failure. Previously announced in STAR as N83-12433

  19. Evaluation the effect of energetic particles in solar flares on satellite's life time

    NASA Astrophysics Data System (ADS)

    Bagheri, Z.; Davoudifar, P.

    2016-09-01

    As the satellites have a multiple role in the humans' life, their damages and therefore logical failures of their segment causes problems and lots of expenses. So evaluating different types of failures in their segments has a crustal role. Solar particles are one of the most important reasons of segment damages (hard and soft) during a solar event or in usual times. During a solar event these particle may cause extensive damages which are even permanent (hard errors). To avoid these effects and design shielding mediums, we need to know SEP (solar energetic particles) flux and MTTF (mean time between two failures) of segments. In the present work, we calculated SEP flux witch collide the satellite in common times, in different altitudes. OMERE software was used to determine the coordinates and specifications of a satellite which in simulations has been launched to space. Then we considered a common electronic computer part and calculated MTTF for it. In the same way the SEP fluxes were calculated during different solar flares of different solar cycles and MTFFs were evaluated during occurring of solar flares. Thus a relation between solar flare energy and life time of the satellite electronic part (hours) was obtained.

  20. Failure analysis of energy storage spring in automobile composite brake chamber

    NASA Astrophysics Data System (ADS)

    Luo, Zai; Wei, Qing; Hu, Xiaofeng

    2015-02-01

    This paper set energy storage spring of parking brake cavity, part of automobile composite brake chamber, as the research object. And constructed the fault tree model of energy storage spring which caused parking brake failure based on the fault tree analysis method. Next, the parking brake failure model of energy storage spring was established by analyzing the working principle of composite brake chamber. Finally, the data of working load and the push rod stroke measured by comprehensive test-bed valve was used to validate the failure model above. The experimental result shows that the failure model can distinguish whether the energy storage spring is faulted.

  1. Nonesterified fatty acids and development of graft failure in renal transplant recipients.

    PubMed

    Klooster, Astrid; Hofker, H Sijbrand; Navis, Gerjan; Homan van der Heide, Jaap J; Gans, Reinold O B; van Goor, Harry; Leuvenink, Henri G D; Bakker, Stephan J L

    2013-06-15

    Chronic transplant dysfunction is the most common cause of graft failure on the long term. Proteinuria is one of the cardinal clinical signs of chronic transplant dysfunction. Albumin-bound fatty acids (FA) have been hypothesized to be instrumental in the etiology of renal damage induced by proteinuria. We therefore questioned whether high circulating FA could be associated with an increased risk for future development of graft failure in renal transplant recipients (RTR). To this end, we prospectively investigated the association of fasting concentrations of circulating nonesterified FA (NEFA) with the development of graft failure in RTR. Baseline measurements were performed between 2001 and 2003 in outpatient RTR with a functioning graft of more than 1 year. Follow-up was recorded until May 19, 2009. Graft failure was defined as return to dialysis or retransplantation. We included 461 RTR at a median (interquartile range [IQR]) of 6.1 (3.3-11.3) years after transplantation. Median (IQR) fasting concentrations of NEFA were 373 (270-521) μM/L. Median (IQR) follow-up for graft failure beyond baseline was 7.1 (6.1-7.5) years. Graft failure occurred in 23 (15%), 14 (9%), and 9 (6%) of RTR across increasing gender-specific tertiles of NEFA (P=0.04). In a gender-adjusted Cox-regression analysis, log-transformed NEFA level was inversely associated with the development of graft failure (hazard ratio, 0.61; 95% confidence interval, 0.47-0.81; P<0.001). In this prospective cohort study in RTR, we found an inverse association between fasting NEFA concentrations and risk for development of graft failure. This association suggests a renoprotective rather than a tubulotoxic effect of NEFA. Further studies on the role of different types of NEFA in the progression of renal disease are warranted.

  2. BPC 157 therapy to detriment sphincters failure-esophagitis-pancreatitis in rat and acute pancreatitis patients low sphincters pressure.

    PubMed

    Petrovic, I; Dobric, I; Drmic, D; Sever, M; Klicek, R; Radic, B; Brcic, L; Kolenc, D; Zlatar, M; Kunjko, K; Jurcic, D; Martinac, M; Rasic, Z; Boban Blagaic, A; Romic, Z; Seiwerth, S; Sikiric, P

    2011-10-01

    Possibly, acute esophagitis and pancreatitis cause each other, and we focused on sphincteric failure as the common causative key able to induce either esophagitis and acute pancreatitis or both of them, and thereby investigate the presence of a common therapy nominator. This may be an anti-ulcer pentadecapeptide BPC 157 (tested for inflammatory bowel disease, wound treatment) affecting esophagitis, lower esophageal and pyloric sphincters failure and acute pancreatitis (10 μg/kg, 10 ng/kg intraperitoneally or in drinking water). The esophagitis-sphincter failure procedure (i.e., insertion of the tubes into the sphincters, lower esophageal and pyloric) and acute pancreatitis procedure (i.e., bile duct ligation) were combined in rats. Esophageal manometry was done in acute pancreatitis patients. In rats acute pancreatitis procedure produced also esophagitis and both sphincter failure, decreased pressure 24 h post-surgery. Furthermore, bile duct ligation alone immediately declines the pressure in both sphincters. Vice versa, the esophagitis-sphincter failure procedure alone produced acute pancreatitis. What's more, these lesions (esophagitis, sphincter failure, acute pancreatitis when combined) aggravate each other (tubes into sphincters and ligated bile duct). Counteraction occurred by BPC 157 therapies. In acute pancreatitis patients lower pressure at rest was in both esophageal sphincters in acute pancreatitis patients. We conclude that BPC 157 could cure esophagitis/sphincter/acute pancreatitis healing failure.

  3. Analysis of failure and maintenance experiences of motor operated valves in a Finnish nuclear power plant

    NASA Astrophysics Data System (ADS)

    Simola, Kaisa; Laakso, Kari

    1992-01-01

    Eight years of operating experiences of 104 motor operated closing valves in different safety systems in nuclear power units were analyzed in a systematic way. The qualitative methods used were Failure Mode and Effect Analysis (FMEA) and Maintenance Effects and Criticality Analysis (MECA). These reliability engineering methods are commonly used in the design stage of equipment. The successful application of these methods for analysis and utilization of operating experiences was demonstrated.

  4. High-throughput sequencing: a failure mode analysis.

    PubMed

    Yang, George S; Stott, Jeffery M; Smailus, Duane; Barber, Sarah A; Balasundaram, Miruna; Marra, Marco A; Holt, Robert A

    2005-01-04

    Basic manufacturing principles are becoming increasingly important in high-throughput sequencing facilities where there is a constant drive to increase quality, increase efficiency, and decrease operating costs. While high-throughput centres report failure rates typically on the order of 10%, the causes of sporadic sequencing failures are seldom analyzed in detail and have not, in the past, been formally reported. Here we report the results of a failure mode analysis of our production sequencing facility based on detailed evaluation of 9,216 ESTs generated from two cDNA libraries. Two categories of failures are described; process-related failures (failures due to equipment or sample handling) and template-related failures (failures that are revealed by close inspection of electropherograms and are likely due to properties of the template DNA sequence itself). Preventative action based on a detailed understanding of failure modes is likely to improve the performance of other production sequencing pipelines.

  5. Successful management of neonatal hemochromatosis by exchange transfusion and immunoglobulin: a case report.

    PubMed

    Babor, F; Hadzik, B; Stannigel, H; Mayatepek, E; Hoehn, T

    2013-01-01

    Neonatal hemochromatosis (NH) is a rare and severe liver disease of mainly intra-uterine onset, characterized by neonatal liver failure, hepatic and extrahepatic iron accumulation. This leads to an altered iron metabolism with resulting siderosis. The disease represents the most common cause of liver failure in neonates and is also the most common indication for neonatal liver transplantation. We present a case of a newborn diagnosed with NH and life threatening liver failure. Initial treatment consisted of chelation therapy and antioxidants, but lack of laboratory and clinical improvement led to an exchange transfusion followed by the singular substitution of intravenous immunoglobulin (IVIG). Both, exchange transfusion and IVIG were tolerated well and led to an improvement of the general condition of the patient and recovery of liver synthetic function. The subsequent favorable course of the disease is described in this case report.

  6. The War on Drugs -- Can an Operational Artist Help Win It?

    DTIC Science & Technology

    1989-05-06

    surviving, employed. Cause of violence by Viewed as peacemakers for their failure to reform their alliance with their countries fast enough, guerillas...they are working for criminals and murders. Also these workers are unaware of the misery and destruction that is caused by the use and sale of drugs...in domestic drug violence and drug abuse is causing the common man to turn away from supporting drug cartels. In addition, improvements in aerial

  7. Fault tree analysis of failure cause of crushing plant and mixing bed hall at Khoy cement factory in Iran☆

    PubMed Central

    Nouri.Gharahasanlou, Ali; Mokhtarei, Ashkan; Khodayarei, Aliasqar; Ataei, Mohammad

    2014-01-01

    Evaluating and analyzing the risk in the mining industry is a new approach for improving the machinery performance. Reliability, safety, and maintenance management based on the risk analysis can enhance the overall availability and utilization of the mining technological systems. This study investigates the failure occurrence probability of the crushing and mixing bed hall department at Azarabadegan Khoy cement plant by using fault tree analysis (FTA) method. The results of the analysis in 200 h operating interval show that the probability of failure occurrence for crushing, conveyor systems, crushing and mixing bed hall department is 73, 64, and 95 percent respectively and the conveyor belt subsystem found as the most probable system for failure. Finally, maintenance as a method of control and prevent the occurrence of failure is proposed. PMID:26779433

  8. Fault tree analysis of failure cause of crushing plant and mixing bed hall at Khoy cement factory in Iran.

    PubMed

    Nouri Gharahasanlou, Ali; Mokhtarei, Ashkan; Khodayarei, Aliasqar; Ataei, Mohammad

    2014-04-01

    Evaluating and analyzing the risk in the mining industry is a new approach for improving the machinery performance. Reliability, safety, and maintenance management based on the risk analysis can enhance the overall availability and utilization of the mining technological systems. This study investigates the failure occurrence probability of the crushing and mixing bed hall department at Azarabadegan Khoy cement plant by using fault tree analysis (FTA) method. The results of the analysis in 200 h operating interval show that the probability of failure occurrence for crushing, conveyor systems, crushing and mixing bed hall department is 73, 64, and 95 percent respectively and the conveyor belt subsystem found as the most probable system for failure. Finally, maintenance as a method of control and prevent the occurrence of failure is proposed.

  9. Investigating incidents of EHR failures in China: analysis of search engine reports.

    PubMed

    Lei, Jianbo; Guan, Pengcheng; Gao, Kaihua; Lu, Xueqing; Sittig, Dean

    2013-01-01

    As the healthcare industry becomes increasingly dependent on information technology (IT), the failure of computerized systems could cause catastrophic effects on patient safety. We conducted an empirical study to analyze news articles available on the internet using Baidu and Google. 116 distinct EHR outage news reports were identified. We examined characteristics, potential causes, and possible preventive strategies. Risk management strategies based are discussed.

  10. Effect of ionized serum calcium on outcomes in acute kidney injury needing renal replacement therapy: Secondary analysis of the Acute Renal Failure Trial Network Study

    PubMed Central

    Afshinnia, Farsad; Belanger, Karen; Palevsky, Paul M.; Young, Eric W.

    2014-01-01

    Background Hypocalcemia is very common in critically ill patients. While the effect of ionized calcium (iCa) on outcome is not well understood, manipulation of iCa in critically ill patients is a common practice. We analyzed all-cause mortality and several secondary outcomes in patients with acute kidney injury (AKI) by categories of serum iCa among participants in the Acute Renal Failure Trial Network (ATN) Study. Methods This is a post hoc secondary analysis of the ATN Study which was not preplanned in the original trial. Risk of mortality and renal recovery by categories of iCa were compared using multiple fixed and adjusted time-varying Cox regression models. Multiple linear regression models were used to explore the impact of baseline iCa on days free from ICU and hospital. Results A total of 685 patients were included in the analysis. Mean age was 60 (SD=15) years. There were 502 male patients (73.3%). Sixty-day all-cause mortality was 57.0%, 54.8%, and 54.4%, in patients with an iCa <1, 1–1.14, and ≥1.15 mmol/L, respectively (P=0.87). Mean of days free from ICU or hospital in all patients and the 28-day renal recovery in survivors to day 28 were not significantly different by categories of iCa. The hazard for death in a fully adjusted time-varying Cox regression survival model was 1.7 (95% CI: 1.3–2.4) comparing iCa <1 to iCa ≥1.15 mmol/L. No outcome was different for levels of iCa >1 mmol/L. Conclusion Severe hypocalcemia with iCa <1 mmol/L independently predicted mortality in patients with AKI needing renal replacement therapy. PMID:23992422

  11. Bile Cast Nephropathy Caused by Obstructive Cholestasis.

    PubMed

    Aniort, Julien; Poyet, Anaïs; Kemeny, Jean-Louis; Philipponnet, Carole; Heng, Anne-Elisabeth

    2017-01-01

    Acute kidney injury (AKI) is a major complication in patients with liver disease. Although hepatorenal syndrome is frequently involved, bile cast nephropathy, characterized by tubular bile cast formation, has been scarcely described in the setting of severe liver failure. Few renal histology studies are available in these patients. We describe a case of bile cast nephropathy in a patient with obstructive cholestasis caused by stones in the common bile duct. The kidney biopsy confirmed this diagnosis, with several green casts in tubular lumens, tubular injury, and bilirubin composition of the tubular casts with Hall stain. The patient had no confounding cause of kidney failure, and complete kidney recovery followed removal of the bile duct obstruction. This case shows that severe cholestasis is sufficient to cause AKI, and that AKI can be reversible after treatment of the biliary obstruction. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  12. Development of CCHE2D embankment break model

    USDA-ARS?s Scientific Manuscript database

    Earthen embankment breach often results in detrimental impact on downstream residents and infrastructure, especially those located in the flooding zone. Embankment failures are most commonly caused by overtopping or internal erosion. This study is to develop a practical numerical model for simulat...

  13. Evaluation of design methods to determine scour depths for bridge structures : [technical summary].

    DOT National Transportation Integrated Search

    2013-01-01

    Scour of bridge foundations is the most common cause of bridge failures. The Federal Highway Administration : (FHWA) has developed a design method, HEC-18, for the state Departments of Transportation (DOTs) to evaluate : the scour potential of existi...

  14. Evaluation of design methods to determine scour depths for bridge structures.

    DOT National Transportation Integrated Search

    2013-03-01

    Scour of bridge foundations is the most common cause of bridge failures. The overall goal of this project was to evaluate the applicability of the existing Hydraulic Engineering Circular (HEC-18) documents method to Louisiana bridges that are mostly ...

  15. Design of maintainable drains for earth retaining structures : final report and design guide.

    DOT National Transportation Integrated Search

    2017-04-01

    Poor drainage is by far the most common cause of poor performance for earth retention systems. Poor performance includes burdensome serviceability problems that can progress to outright failure of the earth retention system if not addressed. : A comm...

  16. Development of a Failure Theory for Concrete [Summary

    DOT National Transportation Integrated Search

    2012-01-01

    Concrete has been in use for over 2,000 years, yet the behavior of this common, but complex, substance is not fully understood. This gap affects standard compressive strength testing (ASTM C 39), which does not account for structural effects caused b...

  17. CHARACTERIZATION OF VIRAL RNA EXTRACTION EFFICIENCY FROM ENVIRONMENTAL WATERS

    EPA Science Inventory

    Inhibition of PCR by environmental factors is a common problem affecting the sensitive detection of pathogenic microorganisms in environmental waters. This inhibition is caused by one of three mechanisms: 1) failure to lyse the microorganism, 2) degradation or sequestering of the...

  18. Competing risk models in reliability systems, an exponential distribution model with Bayesian analysis approach

    NASA Astrophysics Data System (ADS)

    Iskandar, I.

    2018-03-01

    The exponential distribution is the most widely used reliability analysis. This distribution is very suitable for representing the lengths of life of many cases and is available in a simple statistical form. The characteristic of this distribution is a constant hazard rate. The exponential distribution is the lower rank of the Weibull distributions. In this paper our effort is to introduce the basic notions that constitute an exponential competing risks model in reliability analysis using Bayesian analysis approach and presenting their analytic methods. The cases are limited to the models with independent causes of failure. A non-informative prior distribution is used in our analysis. This model describes the likelihood function and follows with the description of the posterior function and the estimations of the point, interval, hazard function, and reliability. The net probability of failure if only one specific risk is present, crude probability of failure due to a specific risk in the presence of other causes, and partial crude probabilities are also included.

  19. Application of Failure Mode and Effect Analysis (FMEA), cause and effect analysis, and Pareto diagram in conjunction with HACCP to a corn curl manufacturing plant.

    PubMed

    Varzakas, Theodoros H; Arvanitoyannis, Ioannis S

    2007-01-01

    The Failure Mode and Effect Analysis (FMEA) model has been applied for the risk assessment of corn curl manufacturing. A tentative approach of FMEA application to the snacks industry was attempted in an effort to exclude the presence of GMOs in the final product. This is of crucial importance both from the ethics and the legislation (Regulations EC 1829/2003; EC 1830/2003; Directive EC 18/2001) point of view. The Preliminary Hazard Analysis and the Fault Tree Analysis were used to analyze and predict the occurring failure modes in a food chain system (corn curls processing plant), based on the functions, characteristics, and/or interactions of the ingredients or the processes, upon which the system depends. Critical Control points have been identified and implemented in the cause and effect diagram (also known as Ishikawa, tree diagram, and the fishbone diagram). Finally, Pareto diagrams were employed towards the optimization of GMOs detection potential of FMEA.

  20. Medical malpractice claims in relation to colorectal malignancy in the national health service.

    PubMed

    Markides, G A; Newman, C M

    2014-01-01

    Under the current increased financial constraints affecting the National Health Service (NHS), clinical negligence claims and associated compensations are constantly rising. Our aim was to identify the magnitude, trends and causes of malpractice claims in relation to a common pathology such as colorectal malignancy in the NHS. Data requests were submitted to the NHS Litigation Authority (NHSLA) and to the Medical Defence Union (MDU) and Medical Protection Society (MPS). Data were reviewed, categorized clinically and analysed in terms of causes and costs behind claims. Data from the MPS and MDU were unavailable. In all, 169 claims were identified from the NHSLA database between 2003 and 2012; 123 (73%) cases had been closed, 80 (65%) of which were successful. An increasing overall claim frequency and success rate were found over the last few years. Total litigation expenses were £8.6 million, with 39% paid out as legal expenses. The commonest cause of complaint in successful claims was in relation to diagnostic delays or failures (58%, £5.1 million), with a delay or failure by the clinician to take action in response to an abnormal investigation result being a major factor. The occurrence of peri-operative complications (20%, £1.6 million) was the second commonest cause. Average frequency and success rates of malpractice claims in secondary care in the NHS are rising, leading to significant overall payouts. The failure or delay in diagnosing colorectal malignancy or its postoperative complications is a common cause behind malpractice claims. Improvement in these areas could enhance patient care and reduce future claims. Colorectal Disease © 2013 The Association of Coloproctology of Great Britain and Ireland.

  1. Spectral analysis of major heart tones

    NASA Astrophysics Data System (ADS)

    Lejkowski, W.; Dobrowolski, A. P.; Majka, K.; Olszewski, R.

    2018-04-01

    The World Health Organization (WHO) figures clearly indicate that cardiovascular disease is the most common cause of death and disability in the world. Early detection of cardiovascular pathologies may contribute to reducing such a high mortality rate. Auscultatory examination is one of the first and most important step in cardiologic diagnostics. Unfortunately, proper diagnosis is closely related to long-term practice and medical experience. The article presents the author's system of recording phonocardiograms and the way of saving data, as well as the outline of the analysis algorithm, which will allow to assign a case to a patient with heart failure or healthy voluntaries' with a certain high probability. The results of a pilot study of phonocardiographic signals were also presented as an introduction to further research aimed at the development of an efficient diagnostic algorithm based on spectral analysis of the heart tone.

  2. Investigation of Possible Wellbore Cement Failures During Hydraulic Fracturing Operations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kim, Jihoon; Moridis, George

    2014-11-01

    We model and assess the possibility of shear failure, using the Mohr-Coulomb model ? along the vertical well by employing a rigorous coupled flow-geomechanic analysis. To this end, we vary the values of cohesion between the well casing and the surrounding cement to representing different quality levels of the cementing operation (low cohesion corresponds to low-quality cement and/or incomplete cementing). The simulation results show that there is very little fracturing when the cement is of high quality.. Conversely, incomplete cementing and/or weak cement can causes significant shear failure and the evolution of long fractures/cracks along the vertical well. Specifically, lowmore » cohesion between the well and cemented areas can cause significant shear failure along the well, but the same cohesion as the cemented zone does not cause shear failure. When the hydraulic fracturing pressure is high, low cohesion of the cement can causes fast propagation of shear failure and of the resulting fracture/crack, but a high-quality cement with no weak zones exhibits limited shear failure that is concentrated near the bottom of the vertical part of the well. Thus, high-quality cement and complete cementing along the vertical well appears to be the strongest protection against shear failure of the wellbore cement and, consequently, against contamination hazards to drinking water aquifers during hydraulic fracturing operations.« less

  3. Scanning electron microscope fractography in failure analysis of steels

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wouters, R.; Froyen, L.

    1996-04-01

    For many failure cases, macroscopic examination of the fracture surface permits discrimination of fatigue fractures from overload fractures. For clarifying fatigue fractures, the practical significance of microfractography is limited to an investigation of the crack initiation areas. Scanning electron microscopy is successfully used in tracing local material abnormalities that act as fatigue crack initiators. The task for the scanning electron microscope, however, is much more substantial in failure analysis of overload fractures, especially for steels. By revealing specific fractographic characteristics, complemented by information about the material and the loading conditions, scanning electron microscopy provides a strong indication of the probablemore » cause of failure. A complete dimple fracture is indicative of acceptable bulk material properties; overloading, by subdimensioning or excessive external loading, has to be verified. The presence of cleavage fracture makes the material properties questionable if external conditions causing embrittlement are absent. Intergranular brittle fracture requires verification of grain-boundary weakening conditions--a sensitized structure, whether or not combined with a local stress state or a specific environment. The role of scanning electron microscopy in failure analysis is illustrated by case histories of the aforementioned fracture types.« less

  4. In-hospital and 3-year outcomes of heart failure patients in South India: The Trivandrum Heart Failure Registry.

    PubMed

    Sanjay, Ganapathi; Jeemon, Panniyammakal; Agarwal, Anubha; Viswanathan, Sunitha; Sreedharan, Madhu; Govindan, Vijayaraghavan; Gopalan, Bahuleyan Charantharalyil; Biju, R; Nair, Tiny; Prathapkumar, N; Krishnakumar, G; Rajalekshmi, N; Suresh, Krishnan; Park, Lawrence P; Huffman, Mark D; Harikrishnan, Sivadasanpillai

    2018-06-06

    Long-term data on outcomes of participants hospitalized with heart failure (HF) from low and middle-income countries are limited. In the Trivandrum Heart Failure Registry (THFR) in 2013, 1205 participants from 18 hospitals in Trivandrum, India were enrolled. Data were collected on demographics, clinical presentation, treatment and outcomes. We performed survival analyses, compared groups and evaluated the association between HF type and mortality, adjusting for covariates that predicted mortality in a global HF risk score. The mean (SD) age of participants was 61.2 (13.7) years. Ischemic heart disease was the most common etiology (72%). In-hospital mortality was higher for participants with heart-failure with reduced ejection fraction (HFrEF) (9.7%) compared to those with heart-failure with preserved ejection fraction (HFpEF) (4.8%, p = 0.003). After three years, 540 (44.8%) of all participants had died. All-cause mortality was lower for participants with HFpEF (40.8%) compared to HFrEF (46.2%, p = 0.049). In multivariable models, older age (hazard ratio [HR] 1.24 per decade, 95% CI 1.15, 1.33), NYHA class-IV symptoms (HR 2.80, 95% CI 1.43, 5.48), and higher serum creatinine (HR 1.12 per mg/dl, 95%CI 1.04, 1.22) were associated with all-cause mortality. Participants with HF in the THFR have high three-year all-cause mortality. Targeted hospital-based quality improvement initiatives are needed to improve survival during and after hospitalization for heart failure. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. Co-Constructed Failure Narratives in Mathematics Tutoring

    ERIC Educational Resources Information Center

    DeLiema, David

    2017-01-01

    The ideas students have about what causes math failure are known to impact motivation. This paper throws light on how attributions of failure are negotiated during math tutoring, between 4th/5th graders and volunteer tutors, at a non-profit STEM-based after-school program. The study employs methods of interaction analysis on a small number of…

  6. Inherited metabolic disorders presenting as acute liver failure in newborns and young children: King's College Hospital experience.

    PubMed

    Hegarty, Robert; Hadzic, Nedim; Gissen, Paul; Dhawan, Anil

    2015-10-01

    Acute liver failure (ALF) in children is a rare condition that is often fatal without liver transplantation. The diagnostic work-up is complex, and the etiology is unidentified in up to half of patients, making decisions like therapeutic transplantation extremely difficult. We collected clinical, laboratory, and outcome data on all patients under 5 years of age who were admitted between January 2001 and December 2011 to King's College Hospital with ALF secondary to an inherited metabolic disease (IMD), a common cause of pediatric acute liver failure. Thirty-six of 127 children with ALF had a metabolic etiology: galactosemia (17); mitochondrial respiratory chain disorder (MRCD, 7); ornithine transcarbamylase (OTC) deficiency (4); tyrosinemia type 1 (4); Niemann-Pick disease type C (NPC, 3); and congenital disorder of glycosylation type 1b (1). Seven children died: MRCD (4) and NPC (3). Four children were transplanted: OTC deficiency (1) and MRCD (3). Fifteen of 25 children followed up showed evidence of developmental delay. IMD is the most common group of disorders in this age group; indeterminate cases may yet include undiagnosed metabolic disorders; the overall survival rate is good but largely depends on diagnosis, while developmental outcome of the surviving patients is less favorable. • Up to half of children with ALF may be undiagnosed. • IMD is a common cause of pediatric acute liver failure. What is New: • Initial diagnostic clues may be gathered from the child's age and laboratory parameters. • Survival of children with IMD-related ALF is good, but developmental outcome is less favorable. • In the future, novel sequencing methods will aid in the diagnosis of disorders in which therapeutic decisions depend upon.

  7. Diagnostic yield of device interrogation in the evaluation of syncope in an elderly population.

    PubMed

    D'Angelo, Robert N; Pickett, Christopher C

    2017-06-01

    Device interrogation has become a standard part of the syncope evaluation for patients admitted with permanent pacemakers (PPM) or implantable cardiac defibrillators (ICD), although few studies have shown interrogation yields clinically useful data. The purpose of this study is to determine the diagnostic yield of device interrogation as well as other commonly performed tests in the workup of unexplained syncope in patients with previously implanted PPMs or ICDs. We retrospectively reviewed records of 88 patients admitted to our medical center for syncope with previously implanted pacemakers between January 1, 2005 and January 1, 2015 using ICD-9 billing data. Pacemaker interrogation demonstrated an arrhythmia as the cause for syncope in 4 patients (4%) and evidence of device failure secondary to perforation in 1 patient (1%). The cause of syncope was unknown in 34 patients (39%). Orthostatic hypotension was the most commonly identified cause of syncope (26%), followed by vasovagal syncope (13%), autonomic dysfunction (5%), ventricular arrhythmia (3%), atrial arrhythmia (2%), congestive heart failure (2%), stroke (2%), and other less common causes (8%). History was the most important determinant of syncope (36%), followed by orthostatic vital signs (14%), device interrogations (4%), head CT (2%), and transthoracic echocardiogram (1%). Device interrogation is rarely useful for elucidating a cause of syncope without concerning physical exam, telemetry, or EKG findings. Interrogation may occasionally yield paroxysmal arrhythmias responsible for syncopal episode, but these rarely alter clinical outcomes. Interrogation appears to be more useful in patients with syncope after recent device placement. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  8. Risk Management and Medico-Legal Issues in Breast Cancer.

    PubMed

    Ward, Charles J; Green, Victoria L

    2016-06-01

    Breast cancer is a leading source of malpractice claims for radiologists and gynecologists. Delay in or failure to diagnosis was the second most common cause for allegations of malpractice and failure to diagnosis breast cancer accounted for the majority of these claims. The amount paid in indemnity for such claims was only second to claims paid for neurologically impaired newborns. Issues involved in documentation and communication are reviewed with a focus on specific medical legal cases. Obstetrician gynecologists must remain cognizant of the potential for liability.

  9. MIC of amoxicillin/clavulanate according to CLSI and EUCAST: discrepancies and clinical impact in patients with bloodstream infections due to Enterobacteriaceae.

    PubMed

    Delgado-Valverde, Mercedes; Valiente-Mendez, Adoración; Torres, Eva; Almirante, Benito; Gómez-Zorrilla, Silvia; Borrell, Nuria; Aller-García, Ana Isabel; Gurgui, Mercedes; Almela, Manel; Sanz, Mercedes; Bou, Germán; Martínez-Martínez, Luis; Cantón, Rafael; Antonio Lepe, Jose; Causse, Manuel; Gutiérrez-Gutiérrez, Belén; Pascual, Álvaro; Rodríguez-Baño, Jesús

    2017-05-01

    To compare results of amoxicillin/clavulanate susceptibility testing using CLSI and EUCAST methodologies and to evaluate their impact on outcome in patients with bacteraemia caused by Enterobacteriaceae. A prospective observational cohort study was conducted in 13 Spanish hospitals. Patients with bacteraemia due to Enterobacteriaceae who received empirical intravenous amoxicillin/clavulanate treatment for at least 48 h were included. MICs were determined following CLSI and EUCAST recommendations. Outcome variables were: failure at the end of treatment with amoxicillin/clavulanate (FEAMC); failure at day 21; and 30 day mortality. Classification and regression tree (CART) analysis and logistic regression were performed. Overall, 264 episodes were included; the urinary tract was the most common source (64.7%) and Escherichia coli the most frequent pathogen (76.5%). Fifty-two isolates (19.7%) showed resistance according to CLSI and 141 (53.4%) according to EUCAST. The kappa index for the concordance between the results of both committees was only 0.24. EUCAST-derived, but not CLSI-derived, MICs were associated with failure when considered as continuous variables. CART analysis suggested a 'resistance' breakpoint of > 8/4 mg/L for CLSI-derived MICs; it predicted FEAMC in adjusted analysis (OR = 1.96; 95% CI: 0.98-3.90). Isolates with EUCAST-derived MICs >16/2 mg/L independently predicted FEAMC (OR = 2.10; 95% CI: 1.05-4.21) and failure at day 21 (OR= 3.01; 95% CI: 0.93-9.67). MICs >32/2 mg/L were only predictive of failure among patients with bacteraemia from urinary or biliary tract sources. CLSI and EUCAST methodologies showed low agreement for determining the MIC of amoxicillin/clavulanate. EUCAST-derived MICs seemed more predictive of failure than CLSI-derived ones. EUCAST-derived MICs >16/2 mg/L were independently associated with therapeutic failure. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  10. Congestive heart failure and central sleep apnea.

    PubMed

    Sands, Scott A; Owens, Robert L

    2015-07-01

    Congestive heart failure (CHF) is among the most common causes of admission to hospitals in the United States, especially in those over age 65. Few data exist regarding the prevalence CHF of Cheyne-Stokes respiration (CSR) owing to congestive heart failure in the intensive care unit (ICU). Nevertheless, CSR is expected to be highly prevalent among those with CHF. Treatment should focus on the underlying mechanisms by which CHF increases loop gain and promotes unstable breathing. Few data are available to determine prevalence of CSR in the ICU, or how CSR might affect clinical management and weaning from mechanical ventilation. Copyright © 2015 Elsevier Inc. All rights reserved.

  11. Congestive Heart Failure and Central Sleep Apnea.

    PubMed

    Sands, Scott A; Owens, Robert L

    2016-03-01

    Congestive heart failure (CHF) is among the most common causes of admission to hospitals in the United States, especially in those over age 65. Few data exist regarding the prevalence CHF of Cheyne-Stokes respiration (CSR) owing to congestive heart failure in the intensive care unit (ICU). Nevertheless, CSR is expected to be highly prevalent among those with CHF. Treatment should focus on the underlying mechanisms by which CHF increases loop gain and promotes unstable breathing. Few data are available to determine prevalence of CSR in the ICU, or how CSR might affect clinical management and weaning from mechanical ventilation. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. A Rare Cause of Death in a Woman: Iatrogenic Bladder Rupture in a Patient With an Indwelling Foley Catheter.

    PubMed

    Paul, Anthea B Mahesan; Simms, Lary; Paul, Abraham E; Mahesan, Andrew A; Ramzanali, Ammani

    2016-05-01

    The CDC estimates that 12-25% of all hospitalized patients receive a urinary catheter during their hospital stay. Foley catheter failure is uncommon and Foley catheter failure associated with iatrogenic urinary bladder rupture (IUBR) is extremely rare. Symptoms are often nonspecific and thus misdiagnosis and delayed treatment is common. In this case report, we present a case of IUBR in a woman from Foley catheter failure, which ultimately led to her demise. This case adds to the literature the importance of suspicion for IUBR in patients with indwelling Foley catheters presenting with lower abdominal pain, hematuria, and decreased urine output.

  13. Structures and geriatrics from a failure analysis experience viewpoint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hopper, D.M.

    In a failure analysis consulting engineering practice one sees a variety of structural failures from which observations may be made concerning geriatric structures. Representative experience with power plants, refineries, offshore structures, and forensic investigations is summarized and generic observations are made regarding the maintenance of fitness for purpose of structures. Although it is important to optimize the engineering design for a range of operational and environmental variables, it is essential that fabrication and inspection controls exist along with common sense based ongoing monitoring and operations procedures. 18 figs.

  14. Incidence and predictors of 6 months mortality after an acute heart failure event in rural Uganda: The Mbarara Heart Failure Registry (MAHFER).

    PubMed

    Abeya, Fardous Charles; Lumori, Boniface Amanee Elias; Akello, Suzan Joan; Annex, Brian H; Buda, Andrew J; Okello, Samson

    2018-03-29

    We sought to estimate the incidence and predictors of all-cause mortality 6 months after heart failure hospitalization in Uganda. Mbarara Heart Failure Registry is a cohort of patients hospitalized with a clinical diagnosis of heart failure at Mbarara Regional Referral Hospital, Uganda. We measured serum electrolytes, cardiac markers, and echocardiograms. All participants were followed until death or end of 6 months. We used Fine and Gray models to estimate the incidence and predictors all-cause mortality. A total of 215 participants were enrolled, 141 (66%) were women, and mean age 53 (standard deviation 22) years. Nineteen (9%) had diabetes, 40 (19%) had HIV, and 119 (55%) had hypertension. The overall incidence of all-cause mortality was 3.58 (95% CI 2.92, 4.38) per 1000 person-days. Men had higher incidence of death compared to women (4.02 vs 3.37 per 1000 person-days). The incidence of all-cause mortality during hospitalization was almost twice that of in the community (27.5 vs 14.77 per 1000 person-days). In adjusted analysis, increasing age, NYHA class IV, decreasing renal function, smoking, each unit increase in serum levels of Potassium, BNP, and Creatine kinase-MB predicted increased incidence of 6 months all-cause death whereas taking beta-blockers and having an index admission on a weekend compared to a week day predicted survival. There is a high incidence of all-cause mortality occurring in-hospital among patients hospitalized with heart failure in rural Uganda. Heart failure directed therapies should be instituted to curb heart failure-related mortality. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Analysis of 11 years of clinical negligence claims in esophagogastric cancer in England.

    PubMed

    Ratnasingham, K; Stroud, L; Knight, J; Preston, S R; Sultan, J

    2017-04-01

    In the National Health Service (NHS), clinical negligence claims and associated compensations are constantly rising. The aim of this study is to identify the size, trends, and causes of litigations claims in relation to esophagogastric (EG) cancer in the NHS. Data requests were submitted to the NHS Litigation Authority (NHSLA) for the period of January 2003 to December 2013. Data were reviewed, categorized clinically, and analyzed in terms of causes and costs behind claims. In this time period, there were 163 claims identified from the NHSLA database. Ninety-five (58.3%) claims were successful with a pay out of £6.25 million. An increasing overall claim frequency and success rate were found over the last few years. Majority of the claims were from gastric cancer 84 (88.4%). The commonest cause of complaint in successful claims was delay or failure in diagnosis (21.1%) and treatment (17.9%). There were only 10.5% successful intraoperative claims, of which 50% were due to unnecessary or additional procedures. The frequency and success rates of malpractice claims in EG cancer are rising. The failure or delay in diagnosing and treatment in EG malignancy are the common cause for successful litigation claims. The findings further reinforce the need to improve early diagnosis. © The Authors 2017. Published by Oxford University Press on behalf of International Society for Diseases of the Esophagus. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  16. High-resolution three-dimensional imaging and analysis of rock falls in Yosemite valley, California

    USGS Publications Warehouse

    Stock, Gregory M.; Bawden, G.W.; Green, J.K.; Hanson, E.; Downing, G.; Collins, B.D.; Bond, S.; Leslar, M.

    2011-01-01

    We present quantitative analyses of recent large rock falls in Yosemite Valley, California, using integrated high-resolution imaging techniques. Rock falls commonly occur from the glacially sculpted granitic walls of Yosemite Valley, modifying this iconic landscape but also posing signifi cant potential hazards and risks. Two large rock falls occurred from the cliff beneath Glacier Point in eastern Yosemite Valley on 7 and 8 October 2008, causing minor injuries and damaging structures in a developed area. We used a combination of gigapixel photography, airborne laser scanning (ALS) data, and ground-based terrestrial laser scanning (TLS) data to characterize the rock-fall detachment surface and adjacent cliff area, quantify the rock-fall volume, evaluate the geologic structure that contributed to failure, and assess the likely failure mode. We merged the ALS and TLS data to resolve the complex, vertical to overhanging topography of the Glacier Point area in three dimensions, and integrated these data with gigapixel photographs to fully image the cliff face in high resolution. Three-dimensional analysis of repeat TLS data reveals that the cumulative failure consisted of a near-planar rock slab with a maximum length of 69.0 m, a mean thickness of 2.1 m, a detachment surface area of 2750 m2, and a volume of 5663 ?? 36 m3. Failure occurred along a surfaceparallel, vertically oriented sheeting joint in a clear example of granitic exfoliation. Stress concentration at crack tips likely propagated fractures through the partially attached slab, leading to failure. Our results demonstrate the utility of high-resolution imaging techniques for quantifying far-range (>1 km) rock falls occurring from the largely inaccessible, vertical rock faces of Yosemite Valley, and for providing highly accurate and precise data needed for rock-fall hazard assessment. ?? 2011 Geological Society of America.

  17. Investigation of erosion rates of field samples using FDOT's enhanced sediment erosion rate flume (SERF) : [summary].

    DOT National Transportation Integrated Search

    2013-09-01

    The most common cause of bridge failure in : the United States is the scouring of sediments, : which are broadly classified as cohesionless : (sand and gravel) and cohesive (rock, clay, sandclay mixtures). For cohesionless sediments, : predicting sco...

  18. Space Shuttle Stiffener Ring Foam Failure, a Non-Conventional Approach

    NASA Technical Reports Server (NTRS)

    Howard, Philip M.

    2007-01-01

    The Space Shuttle makes use of the excellent properties of rigid polyurethane foam for cryogenic tank insulation and as structural protection on the solid rocket boosters. When foam applications debond, classical methods of analysis do not always provide root cause of the failure of the foam. Realizing that foam is the ideal media to document and preserve its own mode of failure, thin sectioning was seen as a logical approach for foam failure analysis. Thin sectioning in two directions, both horizontal and vertical to the application, was chosen to observe the three dimensional morphology of the foam cells. The cell foam morphology provided a much greater understanding of the failure modes than previously achieved.

  19. Liver congestion in heart failure contributes to inappropriately increased serum hepcidin despite anemia.

    PubMed

    Ohno, Yukako; Hanawa, Haruo; Jiao, Shuang; Hayashi, Yuka; Yoshida, Kaori; Suzuki, Tomoyasu; Kashimura, Takeshi; Obata, Hiroaki; Tanaka, Komei; Watanabe, Tohru; Minamino, Tohru

    2015-01-01

    Hepcidin is a key regulator of mammalian iron metabolism and mainly produced by the liver. Hepcidin excess causes iron deficiency and anemia by inhibiting iron absorption from the intestine and iron release from macrophage stores. Anemia is frequently complicated with heart failure. In heart failure patients, the most frequent histologic appearance of liver is congestion. However, it remains unclear whether liver congestion associated with heart failure influences hepcidin production, thereby contributing to anemia and functional iron deficiency. In this study, we investigated this relationship in clinical and basic studies. In clinical studies of consecutive heart failure patients (n = 320), anemia was a common comorbidity (41%). In heart failure patients without active infection and ongoing cancer (n = 30), log-serum hepcidin concentration of patients with liver congestion was higher than those without liver congestion (p = 0.0316). Moreover, in heart failure patients with liver congestion (n = 19), the anemia was associated with the higher serum hepcidin concentrations, which is a type of anemia characterized by induction of hepcidin. Subsequently, we produced a rat model of heart failure with liver congestion by injecting monocrotaline that causes pulmonary hypertension. The monocrotaline-treated rats displayed liver congestion with increase of hepcidin expression at 4 weeks after monocrotaline injection, followed by anemia and functional iron deficiency observed at 5 weeks. We conclude that liver congestion induces hepcidin production, which may result in anemia and functional iron deficiency in some patients with heart failure.

  20. Cardiorespiratory Failure in Thyroid Storm: Case Report and Literature Review

    PubMed Central

    Nai, Qiang; Ansari, Mohammad; Pak, Stella; Tian, Yufei; Amzad-Hossain, Mohammed; Zhang, Yanhong; Lou, Yali; Sen, Shuvendu; Islam, Mohammed

    2018-01-01

    Thyroid storm is a potentially fatal manifestation of thyrotoxicosis. Cardiopulmonary failure is the most common cause of death in thyroid storm. Clinicians should keep in mind that thyroid storm complicated with cardiopulmonary failure can be the first presentation of thyrotoxicosis. As early intervention is associated with improved patient outcome, prompt diagnosis based on clinical grounds is of paramount importance in the management of thyrotoxicosis. A high index of suspicion and the ability of early recognition of impending thyroid storm depends on a thorough knowledge of both the typical and atypical clinical features of this illness. Herein, we report a case of thyroid storm presenting as cardiopulmonary failure in a 51-year-old woman with undiagnosed Grave’s disease. Additionally, we review the pathophysiology of cardiopulmonary failure associated with thyrotoxicosis and various treatment modalities for thyroid storm. PMID:29511425

  1. Cardiorespiratory Failure in Thyroid Storm: Case Report and Literature Review.

    PubMed

    Nai, Qiang; Ansari, Mohammad; Pak, Stella; Tian, Yufei; Amzad-Hossain, Mohammed; Zhang, Yanhong; Lou, Yali; Sen, Shuvendu; Islam, Mohammed

    2018-04-01

    Thyroid storm is a potentially fatal manifestation of thyrotoxicosis. Cardiopulmonary failure is the most common cause of death in thyroid storm. Clinicians should keep in mind that thyroid storm complicated with cardiopulmonary failure can be the first presentation of thyrotoxicosis. As early intervention is associated with improved patient outcome, prompt diagnosis based on clinical grounds is of paramount importance in the management of thyrotoxicosis. A high index of suspicion and the ability of early recognition of impending thyroid storm depends on a thorough knowledge of both the typical and atypical clinical features of this illness. Herein, we report a case of thyroid storm presenting as cardiopulmonary failure in a 51-year-old woman with undiagnosed Grave's disease. Additionally, we review the pathophysiology of cardiopulmonary failure associated with thyrotoxicosis and various treatment modalities for thyroid storm.

  2. Independent Orbiter Assessment (IOA): Analysis of the auxiliary power unit

    NASA Technical Reports Server (NTRS)

    Barnes, J. E.

    1986-01-01

    The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. This report documents the independent analysis results corresponding to the Orbiter Auxiliary Power Unit (APU). The APUs are required to provide power to the Orbiter hydraulics systems during ascent and entry flight phases for aerosurface actuation, main engine gimballing, landing gear extension, and other vital functions. For analysis purposes, the APU system was broken down into ten functional subsystems. Each level of hardware was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode. A preponderance of 1/1 criticality items were related to failures that allowed the hydrazine fuel to escape into the Orbiter aft compartment, creating a severe fire hazard, and failures that caused loss of the gas generator injector cooling system.

  3. Geological hazards associated with intense rain and flooding in Natal

    NASA Astrophysics Data System (ADS)

    Thomas, M. A.; van Schalkwyk, A.

    1993-02-01

    The combination of rugged topography and climate predisposes the province of Natal to severe floods. Information available since 1856 shows that bridge and slope failures have been recorded in twenty out of twenty-five flood episodes. Bridge failures are caused mostly by geological factors. The mechanism of failure can be classified broadly into foundation failures and changes of river course. Scour and debris build-up have led to failures of foundations located in rock and alluvial sediments. In preparing and replacing bridges the aims have been to increase the area of waterway, increase foundation depths to reach more competent strata and lay protection along banks and abutments to counteract scour. Historically, slope failures have not been well documented but following the 1987/88 storms 223 slope failures were recorded. The classification of the failures allowed the mechanisms of failure to be ascertained, and general design considerations to be reviewed. In areas adjacent to the Drakensberg Mountains slope failures are part of a natural erosion cycle which may be accelerated in periods of heavy rain. Throughout Natal, hummocky ground adjacent to dolerite intrusions reveals the on-going history of failure caused by water ingress and the generation of high pore water pressures on the slip planes. Classic flows occurred throughout the Greater Durban area where residual sandy soils of the Natal Group sandstone became supersaturated. Slumping was common on steep terrain underlain by granite-gneiss in the Kwa-Zulu area. Shales of the Pietermaritzburg Formation are notoriously unstable, yet few failures occurred during the summer storms of 1987/88. Inadequate drainage was responsible for many failures, this was particularly so along the railways.

  4. Race, common genetic variation, and therapeutic response disparities in heart failure.

    PubMed

    Taylor, Mathew R; Sun, Albert Y; Davis, Gordon; Fiuzat, Mona; Liggett, Stephen B; Bristow, Michael R

    2014-12-01

    Because of its comparatively recent evolution, Homo sapiens exhibit relatively little within-species genomic diversity. However, because of genome size, a proportionately small amount of variation creates ample opportunities for both rare mutations that may cause disease as well as more common genetic variations that may be important in disease modification or pharmacogenetics. Primarily because of the East African origin of modern humans, individuals of African ancestry (AA) exhibit greater degrees of genetic diversity than more recently established populations, such as those of European ancestry (EA) or Asian ancestry. Those population effects extend to differences in frequency of common gene variants that may be important in heart failure natural history or therapy. For cell-signaling mechanisms important in heart failure, we review and present new data for genetic variation between AA and EA populations. Data indicate that: 1) neurohormonal signaling mechanisms frequently (16 of the 19 investigated polymorphisms) exhibit racial differences in the allele frequencies of variants comprising key constituents; 2) some of these differences in allele frequency may differentially affect the natural history of heart failure in AA compared with EA individuals; and 3) in many cases, these differences likely play a role in observed racial differences in drug or device response. Copyright © 2014 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  5. Effect of multidisciplinary disease management for hospitalized heart failure under a national health insurance programme.

    PubMed

    Mao, Chun-Tai; Liu, Min-Hui; Hsu, Kuang-Hung; Fu, Tieh-Cheng; Wang, Jong-Shyan; Huang, Yu-Yen; Yang, Ning-I; Wang, Chao-Hung

    2015-09-01

    Multidisciplinary disease management programmes (MDPs) for heart failure have been shown to be effective in Western countries. However, it is not known whether they improve outcomes in a high population density country with a national health insurance programme. In total, 349 patients hospitalized because of heart failure were randomized into control and MDP groups. All-cause death and re-hospitalization related to heart failure were analyzed. The median follow-up period was approximately 2 years. Mean patient age was 60 years; 31% were women; and 50% of patients had coronary artery disease. MDP was associated with fewer all-cause deaths [hazard ratio (HR) = 0.49, 95% confidence interval (CI) = 0.27-0.91, P = 0.02] and heart failure-related re-hospitalizations (HR = 0.44, 95% CI = 0.25-0.77, P = 0.004). MDP was still associated with better outcomes for all-cause death (HR = 0.53, 95% CI = 0.29-0.98, P = 0.04) and heart failure-related re-hospitalization (HR = 0.46, 95% CI = 0.26-0.81, P = 0.007), after adjusting for age, diuretics, diabetes mellitus, chronic kidney disease, hypertension, sodium, and albumin. However, MDPs' effect on all-cause mortality and heart failure-related re-hospitalization was significantly attenuated after adjusting for angiotensin-converting enzyme inhibitors/angiotensin II receptor blockers or β-blockers. A stratified analysis showed that MDP combined with guideline-based medication had synergistic effects. MDP is effective in lowering all-cause mortality and re-hospitalization rates related to heart failure under a national health insurance programme. MDP synergistically improves the effectiveness of guidelines-based medications for heart failure.

  6. Etiology of chronic renal failure in Jenin district, Palestine.

    PubMed

    Abumwais, Jamal Qasem

    2012-01-01

    A study was conducted on chronic renal failure patients treated by medications or by hemodialysis at The Martyr Dr. Khalil Sulaiman Hospital in Jenin city, Palestine, from 1/8/2005 to 1/8/2006 to know the underlying etiology of chronic renal failure. The subjects included were 84 patients. The information was obtained from files of the patients. The diagnosis was based on medical history, laboratory tests, X-rays, CT scans, ultrasound and renal biopsies. The results showed that the three most common causes of chronic renal failure in Jenin district were diabetes mellitus (33.32%), hypertension (16.7%), and chronic glomerulonephritis (13.1%). Inherited kidney diseases formed an important percentage (17.85%) and included primary hyperoxaluria (10.71%), Alport's syndrome (5.95%), and adult polycystic kidney disease (1.19%). These results differ from what is found in most developing countries including many Arab countries where the principal causes of chronic renal failure are chronic glomerulonephritis and interstitial nephritis. The high prevalence of inherited kidney diseases in some families (primary hyperoxaluria and Alport's) syndrome may be explained by the very high prevalence of consanguineous marriage especially among cousins in these families.

  7. [Frequency, etiology, and outcomes of acute renal failure (data of Kaunas University of Medicine Hospital in 1995-2006)].

    PubMed

    Skarupskiene, Inga; Kuzminskis, Vytautas; Ziginskiene, Edita

    2007-01-01

    The aim of this study was to determine the frequency, etiology, and outcomes of acute renal failure. We retrospectively collected data on all patients (n=1653) who received renal replacement therapy for acute renal failure at the Kaunas University of Medicine Hospital during 1995-2006. The number of patients with acute renal failure increased nine times during the 11-year period. The mean age of patients was 59.76+/-17.52 years and increased from 44.97+/-17.1 years in 1995 to 62.84+/-16.49 years in 2006. The most common causes of acute renal failure were renal (n=646, 39%), prerenal (n=380, 23%), and obstructive (n=145, 9%). The renal replacement therapy was discontinued because of recovery of renal function in 49.9% of cases. The overall hospital mortality rate was 45.1%. Renal function did not recover in 6.7% of patients. The mortality rate over the 11-year period varied from 37.8 to 57.5%. The highest mortality rate was in the neurosurgical (62.3%) and cardiac surgical (61.8%) intensive care units. High mortality rate (more than 50%) was in the groups of patients with acute renal failure that was caused by hepatorenal syndrome, shock, sepsis, and reduced cardiac output.

  8. The respiratory system.

    PubMed

    Zifko, U; Chen, R

    1996-10-01

    Neurological disorders frequently contribute to respiratory failure in critically ill patients. They may be the primary reason for the initiation of mechanical ventilation, or may develop later as a secondary complication. Disorders of the central nervous system leading to respiratory failure include metabolic encephalopathies, acute stroke, lesions of the motor cortex and brain-stem respiratory centres, and their descending pathways. Guillan-Barré syndrome, critical illness polyneuropathy and acute quadriplegic myopathy are the more common neuromuscular causes of respiratory failure. Clinical observations and pulmonary function tests are important in monitoring respiratory function. Respiratory electrophysiological studies are useful in the investigation and monitoring of respiratory failure. Transcortical and cervical magnetic stimulation can assess the central respiratory drive, and may be useful in determining the prognosis in ventilated patients, with cervical cord dysfunction. It is also helpful in the assessment of failure to wean, which is often caused by a combination of central and peripheral nervous system disorders. Phrenic nerve conduction studies and needle electromyography of the diaphragm and chest wall muscles are useful to characterize neuropathies and myopathies affecting the diaphragm. Repetitive phrenic nerve stimulation can assess neuromuscular transmission defects. It is important to identify patients at risk of respiratory failure. They should be carefully monitored and mechanical ventilation should be initiated before the development of severe hypoxaemia.

  9. Stress Analysis and Testing at the Marshall Space Flight Center to Study Cause and Corrective Action of Space Shuttle External Tank Stringer Failures

    NASA Technical Reports Server (NTRS)

    Wingate, Robert J.

    2012-01-01

    After the launch scrub of Space Shuttle mission STS-133 on November 5, 2010, large cracks were discovered in two of the External Tank intertank stringers. The NASA Marshall Space Flight Center, as managing center for the External Tank Project, coordinated the ensuing failure investigation and repair activities with several organizations, including the manufacturer, Lockheed Martin. To support the investigation, the Marshall Space Flight Center formed an ad-hoc stress analysis team to complement the efforts of Lockheed Martin. The team undertook six major efforts to analyze or test the structural behavior of the stringers. Extensive finite element modeling was performed to characterize the local stresses in the stringers near the region of failure. Data from a full-scale tanking test and from several subcomponent static load tests were used to confirm the analytical conclusions. The analysis and test activities of the team are summarized. The root cause of the stringer failures and the flight readiness rationale for the repairs that were implemented are discussed.

  10. An efficient scan diagnosis methodology according to scan failure mode for yield enhancement

    NASA Astrophysics Data System (ADS)

    Kim, Jung-Tae; Seo, Nam-Sik; Oh, Ghil-Geun; Kim, Dae-Gue; Lee, Kyu-Taek; Choi, Chi-Young; Kim, InSoo; Min, Hyoung Bok

    2008-12-01

    Yield has always been a driving consideration during fabrication of modern semiconductor industry. Statistically, the largest portion of wafer yield loss is defective scan failure. This paper presents efficient failure analysis methods for initial yield ramp up and ongoing product with scan diagnosis. Result of our analysis shows that more than 60% of the scan failure dies fall into the category of shift mode in the very deep submicron (VDSM) devices. However, localization of scan shift mode failure is very difficult in comparison to capture mode failure because it is caused by the malfunction of scan chain. Addressing the biggest challenge, we propose the most suitable analysis method according to scan failure mode (capture / shift) for yield enhancement. In the event of capture failure mode, this paper describes the method that integrates scan diagnosis flow and backside probing technology to obtain more accurate candidates. We also describe several unique techniques, such as bulk back-grinding solution, efficient backside probing and signal analysis method. Lastly, we introduce blocked chain analysis algorithm for efficient analysis of shift failure mode. In this paper, we contribute to enhancement of the yield as a result of the combination of two methods. We confirm the failure candidates with physical failure analysis (PFA) method. The direct feedback of the defective visualization is useful to mass-produce devices in a shorter time. The experimental data on mass products show that our method produces average reduction by 13.7% in defective SCAN & SRAM-BIST failure rates and by 18.2% in wafer yield rates.

  11. Scenario-based risk analysis of winter snowstorms in the German lowlands

    NASA Astrophysics Data System (ADS)

    von Wulffen, Anja

    2014-05-01

    The northern German lowlands are not especially known for a high frequency of snowfall events. Nevertheless under certain synoptic conditions Lake-Effect-like phenomena caused by the proximity especially of the Baltic Sea can lead to significantly reinforced snowfall intensities that are often accompanied by rather high wind speeds. This makes for infrequent but potentially disastrous snowstorms in a region less accustomed to snow impacts. One possible consequence of an infrastructure failure cascade resulting from severe and longer-lasting snowstorms is a regional disruption of the food supply chain. In the context of "just-in-time"-logistics and the accompanying decrease of storage capabilities, this poses a significant threat to the population's food security. Within the project NeuENV ("New strategies to ensure sufficient food supply in case of crisis in Germany") a snowstorm in the German lowlands involving widespread disruptions of the transportation infrastructure as well as power failures is therefore used as one model for future food supply chain disruptions. In order to obtain a reliable evaluation of the supply chain and crisis management resilience, a detailed snowstorm scenario is being developed. For this purpose, a database of impact reports of past snowstorm events is assembled and analysed to obtain a comprehensive overview of potential infrastructure impairments and failures. Examples of events analysed in this context include the winter 1978/79 with its disastrous snow drifts that commonly attained heights of 3m to 5m leading to a transportation infrastructure collapse across a wide area, the wet snow event in November 2005 in the Münsterland region that caused power failures for up to 250.000 homes, and more recent snowstorms such as Daisy in January 2010. A catalogue of thresholds for relevant parameters indicating when significant failures can be expected is then compiled through a comparison of impact reports with the detailed meteorological conditions. Based on these findings, an exemplary synoptic evolution of a snowstorm leading to representative infrastructure failure cascades is constructed. In a next step, an extrapolation of this obtained scenario to future climate and societal conditions as well as plausible more extreme but not yet observed meteorological conditions is planned in order to obtain a thorough analysis of possible threats to the German food distribution system and a strong foundation for future disaster mitigation planning efforts.

  12. Multi-institutional application of Failure Mode and Effects Analysis (FMEA) to CyberKnife Stereotactic Body Radiation Therapy (SBRT).

    PubMed

    Veronese, Ivan; De Martin, Elena; Martinotti, Anna Stefania; Fumagalli, Maria Luisa; Vite, Cristina; Redaelli, Irene; Malatesta, Tiziana; Mancosu, Pietro; Beltramo, Giancarlo; Fariselli, Laura; Cantone, Marie Claire

    2015-06-13

    A multidisciplinary and multi-institutional working group applied the Failure Mode and Effects Analysis (FMEA) approach to assess the risks for patients undergoing Stereotactic Body Radiation Therapy (SBRT) treatments for lesions located in spine and liver in two CyberKnife® Centres. The various sub-processes characterizing the SBRT treatment were identified to generate the process trees of both the treatment planning and delivery phases. This analysis drove to the identification and subsequent scoring of the potential failure modes, together with their causes and effects, using the risk probability number (RPN) scoring system. Novel solutions aimed to increase patient safety were accordingly considered. The process-tree characterising the SBRT treatment planning stage was composed with a total of 48 sub-processes. Similarly, 42 sub-processes were identified in the stage of delivery to liver tumours and 30 in the stage of delivery to spine lesions. All the sub-processes were judged to be potentially prone to one or more failure modes. Nineteen failures (i.e. 5 in treatment planning stage, 5 in the delivery to liver lesions and 9 in the delivery to spine lesions) were considered of high concern in view of the high RPN and/or severity index value. The analysis of the potential failures, their causes and effects allowed to improve the safety strategies already adopted in the clinical practice with additional measures for optimizing quality management workflow and increasing patient safety.

  13. Uncoupling of oxidative phosphorylation and ATP synthase reversal within the hyperthermic heart

    PubMed Central

    Power, Amelia; Pearson, Nicholas; Pham, Toan; Cheung, Carlos; Phillips, Anthony; Hickey, Anthony

    2014-01-01

    Abstract Heart failure is a common cause of death with hyperthermia, and the exact cause of hyperthermic heart failure appears elusive. We hypothesize that the energy supply (ATP) of the heart may become impaired due to increased inner‐mitochondrial membrane permeability and inefficient oxidative phosphorylation (OXPHOS). Therefore, we assessed isolated working heart and mitochondrial function. Ex vivo working rat hearts were perfused between 37 and 43.5°C and showed break points in all functional parameters at ~40.5°C. Mitochondrial high‐resolution respirometry coupled to fluorometry was employed to determine the effects of hyperthermia on OXPHOS and mitochondrial membrane potential (ΔΨ) in vitro using a comprehensive metabolic substrate complement with isolated mitochondria. Relative to 37 and 40°C, 43°C elevated Leak O2 flux and depressed OXPHOS O2 flux and ∆Ψ. Measurement of steady‐state ATP production from mitochondria revealed decreased ATP synthesis capacity, and a negative steady‐state P:O ratio at 43°C. This approach offers a more powerful analysis of the effects of temperature on OXPHOS that cannot be measured using simple measures such as the traditional respiratory control ratio (RCR) or P:O ratio, which, respectively, can only approach 1 or 0 with inner‐membrane failure. At 40°C there was only a slight enhancement of the Leak O2 flux and this did not significantly affect ATP production rate. Therefore, during mild hyperthermia (40°C) there is no enhancement of ATP supply by mitochondria, to accompany increasing cardiac energy demands, while between this and critical hyperthermia (43°C), mitochondria become net consumers of ATP. This consumption may contribute to cardiac failure or permanent damage during severe hyperthermia. PMID:25263202

  14. Identification and assessment of common errors in the admission process of patients in Isfahan Fertility and Infertility Center based on "failure modes and effects analysis".

    PubMed

    Dehghan, Ashraf; Abumasoudi, Rouhollah Sheikh; Ehsanpour, Soheila

    2016-01-01

    Infertility and errors in the process of its treatment have a negative impact on infertile couples. The present study was aimed to identify and assess the common errors in the reception process by applying the approach of "failure modes and effects analysis" (FMEA). In this descriptive cross-sectional study, the admission process of fertility and infertility center of Isfahan was selected for evaluation of its errors based on the team members' decision. At first, the admission process was charted through observations and interviewing employees, holding multiple panels, and using FMEA worksheet, which has been used in many researches all over the world and also in Iran. Its validity was evaluated through content and face validity, and its reliability was evaluated through reviewing and confirmation of the obtained information by the FMEA team, and eventually possible errors, causes, and three indicators of severity of effect, probability of occurrence, and probability of detection were determined and corrective actions were proposed. Data analysis was determined by the number of risk priority (RPN) which is calculated by multiplying the severity of effect, probability of occurrence, and probability of detection. Twenty-five errors with RPN ≥ 125 was detected through the admission process, in which six cases of error had high priority in terms of severity and occurrence probability and were identified as high-risk errors. The team-oriented method of FMEA could be useful for assessment of errors and also to reduce the occurrence probability of errors.

  15. Risk factors for eye bank preparation failure of Descemet membrane endothelial keratoplasty tissue.

    PubMed

    Vianna, Lucas M M; Stoeger, Christopher G; Galloway, Joshua D; Terry, Mark; Cope, Leslie; Belfort, Rubens; Jun, Albert S

    2015-05-01

    To assess the results of a single eye bank preparing a high volume of Descemet membrane endothelial keratoplasty (DMEK) tissues using multiple technicians to provide an overview of the experience and to identify possible risk factors for DMEK preparation failure. Cross-sectional study. setting: Lions VisionGift and Wilmer Eye Institute at Johns Hopkins Hospital. All 563 corneal tissues processed by technicians at Lions VisionGift for DMEK between October 2011 and May 2014 inclusive. Tissues were divided into 2 groups: DMEK preparation success and DMEK preparation failure. We compared donor characteristics, including past medical history. The overall tissue preparation failure rate was 5.2%. Univariate analysis showed diabetes mellitus (P = .000028) and its duration (P = .023), hypertension (P = .021), and hyperlipidemia or obesity (P = .0004) were more common in the failure group. Multivariate analysis showed diabetes mellitus (P = .0001) and hyperlipidemia or obesity (P = .0142) were more common in the failure group. Elimination of tissues from donors either with diabetes or with hyperlipidemia or obesity reduced the failure rate from 5.2% to 2.2%. Trends toward lower failure rates occurring with increased technician experience also were found. Our work showed that tissues from donors with diabetes mellitus (especially with longer disease duration) and hyperlipidemia or obesity were associated with higher failure rates in DMEK preparation. Elimination of tissues from donors either with diabetes mellitus or with hyperlipidemia or obesity reduced the failure rate. In addition, our data may provide useful initial guidelines and benchmark values for eye banks seeking to establish and maintain DMEK programs. Copyright © 2015 Elsevier Inc. All rights reserved.

  16. Micrococcus species-related peritonitis in patients receiving peritoneal dialysis.

    PubMed

    Kao, Chih-Chin; Chiang, Chih-Kang; Huang, Jenq-Wen

    2014-01-01

    Peritonitis is a major complication of peritoneal dialysis (PD) and remains the most common cause of PD failure. Micrococci are catalase-positive, coagulase-negative, and gram-positive cocci that are spherical, often found in tetrad, and belong to the family Micrococcaceae. Micrococcus species are commonly found in the environment, and it is now recognized that Micrococcus species can be opportunistic pathogens in immunocompromised patients. The only consistent predisposing factor for Micrococcus infection is an immunocompromised state. We report three cases of Micrococcus PD peritonitis. Improper practice of PD may have been the causative factor. Although Micrococcus species are low-virulence pathogens, infection could result in refractory peritonitis and subsequent PD failure. Intraperitoneal administration of vancomycin for at least 2 weeks is recommended for Micrococcus peritonitis.

  17. A knowledge acquisition process to analyse operational problems in solid waste management facilities.

    PubMed

    Dokas, Ioannis M; Panagiotakopoulos, Demetrios C

    2006-08-01

    The available expertise on managing and operating solid waste management (SWM) facilities varies among countries and among types of facilities. Few experts are willing to record their experience, while few researchers systematically investigate the chains of events that could trigger operational failures in a facility; expertise acquisition and dissemination, in SWM, is neither popular nor easy, despite the great need for it. This paper presents a knowledge acquisition process aimed at capturing, codifying and expanding reliable expertise and propagating it to non-experts. The knowledge engineer (KE), the person performing the acquisition, must identify the events (or causes) that could trigger a failure, determine whether a specific event could trigger more than one failure, and establish how various events are related among themselves and how they are linked to specific operational problems. The proposed process, which utilizes logic diagrams (fault trees) widely used in system safety and reliability analyses, was used for the analysis of 24 common landfill operational problems. The acquired knowledge led to the development of a web-based expert system (Landfill Operation Management Advisor, http://loma.civil.duth.gr), which estimates the occurrence possibility of operational problems, provides advice and suggests solutions.

  18. Failure rate of inferior alveolar nerve block among dental students and interns

    PubMed Central

    AlHindi, Maryam; Rashed, Bayan; AlOtaibi, Noura

    2016-01-01

    Objectives: To report the failure rate of inferior alveolar nerve block (IANB) among dental students and interns, causes of failure, investigate awareness of different IANB techniques, and to report IANB-associated complications. Methods: A 3-page questionnaire containing 13 questions was distributed to a random sample of 350 third to fifth years students and interns at the College of Dentistry, King Saud University, Riyadh, Saudi Arabia on January 2011. It included demographic questions (age, gender, and academic level) and questions on IANB failure frequency and reasons, actions taken to overcome the failure, and awareness of different anesthetic techniques, supplementary techniques, and complications. Results: Of the 250 distributed questionnaires, 238 were returned (68% response rate). Most (85.7%) of surveyed sample had experienced IANB failure once or twice. The participants attributed the failures most commonly (66.45%) to anatomical variations. The most common alternative technique used was intraligamentary injection (57.1%), although 42.8% of the sample never attempted any alternatives. Large portion of the samples stated that they either lacked both knowledge of and training for other techniques (44.9%), or that they had knowledge of them but not enough training to perform them (45.8%). Conclusion: To decrease IANB failure rates for dental students and interns, knowledge of landmarks, anatomical variation and their training in alternatives to IANB, such as the Gow-Gates and Akinosi techniques, both theoretically and clinically in the dental curriculum should be enhanced. PMID:26739980

  19. Failure rate of inferior alveolar nerve block among dental students and interns.

    PubMed

    AlHindi, Maryam; Rashed, Bayan; AlOtaibi, Noura

    2016-01-01

    To report the failure rate of inferior alveolar nerve block (IANB) among dental students and interns, causes of failure, investigate awareness of different IANB techniques, and to report IANB-associated complications.   A 3-page questionnaire containing 13 questions was distributed to a random sample of 350 third to fifth years students and interns at the College of Dentistry, King Saud University, Riyadh, Saudi Arabia on January 2011. It included demographic questions (age, gender, and academic level) and questions on IANB failure frequency and reasons, actions taken to overcome the failure, and awareness of different anesthetic techniques, supplementary techniques, and complications.   Of the 250 distributed questionnaires, 238 were returned (68% response rate). Most (85.7%) of surveyed sample had experienced IANB failure once or twice. The participants attributed the failures most commonly (66.45%) to anatomical variations. The most common alternative technique used was intraligamentary injection (57.1%), although 42.8% of the sample never attempted any alternatives. Large portion of the samples stated that they either lacked both knowledge of and training for other techniques (44.9%), or that they had knowledge of them but not enough training to perform them (45.8%).  To  decrease IANB failure rates for dental students and interns, knowledge of landmarks, anatomical variation and their training in alternatives to IANB, such as the Gow-Gates and Akinosi techniques, both theoretically and clinically in the dental curriculum should be enhanced.

  20. Aging assessment of large electric motors in nuclear power plants

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Villaran, M.; Subudhi, M.

    1996-03-01

    Large electric motors serve as the prime movers to drive high capacity pumps, fans, compressors, and generators in a variety of nuclear plant systems. This study examined the stressors that cause degradation and aging in large electric motors operating in various plant locations and environments. The operating history of these machines in nuclear plant service was studied by review and analysis of failure reports in the NPRDS and LER databases. This was supplemented by a review of motor designs, and their nuclear and balance of plant applications, in order to characterize the failure mechanisms that cause degradation, aging, and failuremore » in large electric motors. A generic failure modes and effects analysis for large squirrel cage induction motors was performed to identify the degradation and aging mechanisms affecting various components of these large motors, the failure modes that result, and their effects upon the function of the motor. The effects of large motor failures upon the systems in which they are operating, and on the plant as a whole, were analyzed from failure reports in the databases. The effectiveness of the industry`s large motor maintenance programs was assessed based upon the failure reports in the databases and reviews of plant maintenance procedures and programs.« less

  1. Determination of UAV pre-flight Checklist for flight test purpose using qualitative failure analysis

    NASA Astrophysics Data System (ADS)

    Hendarko; Indriyanto, T.; Syardianto; Maulana, F. A.

    2018-05-01

    Safety aspects are of paramount importance in flight, especially in flight test phase. Before performing any flight tests of either manned or unmanned aircraft, one should include pre-flight checklists as a required safety document in the flight test plan. This paper reports on the development of a new approach for determination of pre-flight checklists for UAV flight test based on aircraft’s failure analysis. The Lapan’s LSA (Light Surveillance Aircraft) is used as a study case, assuming this aircraft has been transformed into the unmanned version. Failure analysis is performed on LSA using fault tree analysis (FTA) method. Analysis is focused on propulsion system and flight control system, which fail of these systems will lead to catastrophic events. Pre-flight checklist of the UAV is then constructed based on the basic causes obtained from failure analysis.

  2. Variation in Postsepsis Readmission Patterns: A Cohort Study of Veterans Affairs Beneficiaries.

    PubMed

    Prescott, Hallie C

    2017-02-01

    Rehospitalization is common after sepsis, but little is known about the variation in readmission patterns across patient groups and care locations. To examine the variation in postsepsis readmission rates and diagnoses by patient age, nursing facility use, admission year, and hospital among U.S. Veterans Affairs (VA) beneficiaries. Observational cohort study of VA beneficiaries who survived a sepsis hospitalization (2009-2011) at 114 VA hospitals, stratified by age (<65 vs. ≥65 yr), nursing home usage (none, chronic, or acute), year of admission (2009, 2010, 2011), and hospital. In the primary analysis, sepsis hospitalizations were identified using a previously validated method. Sensitivity analyses were performed using alternative definitions with explicit International Classification of Diseases, Ninth Revision, Clinical Modification, codes for sepsis, and separately for severe sepsis and septic shock. The primary outcomes were rate of 90-day all-cause hospital readmission after sepsis hospitalization and proportion of readmissions resulting from specific diagnoses, including the proportion of "potentially preventable" readmissions. Readmission diagnoses were similar from 2009 to 2011, with little variation in readmission rates across hospitals. The top six readmission diagnoses (heart failure, pneumonia, sepsis, urinary tract infection, acute renal failure, and chronic obstructive pulmonary disease) accounted for 30% of all readmissions. Although about one in five readmissions had a principal diagnosis for infection, 58% of all readmissions received early systemic antibiotics. Infection accounted for a greater proportion of readmissions among patients discharged to nursing facilities compared with patients discharged to home (25.0-27.1% vs. 16.8%) and among older vs. younger patients (22.2% vs. 15.8%). Potentially preventable readmissions accounted for a quarter of readmissions overall and were more common among older patients and patients discharged to nursing facilities. Hospital readmission rates after sepsis were similar by site and admission year. Heart failure, pneumonia, sepsis, and urinary tract infection were common readmission diagnoses across all patient groups. Readmission for infection and potentially preventable diagnoses were more common in older patients and patients discharged to nursing facilities.

  3. Sacubitril/Valsartan: A Review in Chronic Heart Failure with Reduced Ejection Fraction.

    PubMed

    McCormack, Paul L

    2016-03-01

    Sacubitril/valsartan (Entresto™; LCZ696) is an orally administered supramolecular sodium salt complex of the neprilysin inhibitor prodrug sacubitril and the angiotensin receptor blocker (ARB) valsartan, which was recently approved in the US and the EU for the treatment of chronic heart failure (NYHA class II-IV) with reduced ejection fraction (HFrEF). In the large, randomized, double-blind, PARADIGM-HF trial, sacubitril/valsartan reduced the incidence of death from cardiovascular causes or first hospitalization for worsening heart failure (composite primary endpoint) significantly more than the angiotensin converting enzyme (ACE) inhibitor enalapril. Sacubitril/valsartan was also superior to enalapril in reducing death from any cause and in limiting the progression of heart failure. Sacubitril/valsartan was generally well tolerated, with no increase in life-threatening adverse events. Symptomatic hypotension was significantly more common with sacubitril/valsartan than with enalapril; the incidence of angio-oedema was low. Therefore, sacubitril/valsartan is a more effective replacement for an ACE inhibitor or an ARB in the treatment of HFrEF, and is likely to influence the basic approach to treatment.

  4. Effect of porcelain and enamel thickness on porcelain veneer failure loads in vitro.

    PubMed

    Ge, Chunling; Green, Chad C; Sederstrom, Dalene; McLaren, Edward A; White, Shane N

    2014-05-01

    Bonded porcelain veneers are widely used esthetic restorations. Although high success and survival rates have been reported, failures occur. Fracture is the most common failure mode. Fractures range from incomplete cracks to the catastrophic. Minimally invasive or thin partial veneers have gained popularity. The aim of this study was to measure the influences of porcelain veneer thickness and enamel substrate thickness on the loads needed to cause the initial fracture and catastrophic failure of porcelain veneers. Model discoid porcelain veneer specimens of varying thickness were bonded to the flattened facial surfaces of incisors, artificially aged, and loaded to failure with a small sphere. Individual fracture events were identified and analyzed statistically and fractographically. Fracture events included initial Hertzian cracks, intermediate radial cracks, and catastrophic gross failure. Increased porcelain, enamel, and their combined thickness had like effects in substantially raising resistance to catastrophic failure but also slightly decreased resistance to initial Hertzian cracking. Fractographic and numerical data demonstrated that porcelain and tooth enamel behaved in a remarkably similar manner. As porcelain thickness, enamel thickness, and their combined thickness increased, the loads needed to produce initial fracture and catastrophic failure rose substantially. Porcelain veneers withstood considerable damage before catastrophic failure. Increased enamel thickness, increased porcelain thickness, and increased combined enamel and porcelain thickness all profoundly raised the failure loads necessary to cause catastrophic failure. Enamel and feldspathic porcelain behaved in a like manner. Surface contact damage occurred initially. Final catastrophic failure followed flexural radial cracking. Bonded porcelain veneers were highly damage tolerant. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  5. Multi-rater Agreement in the Assessment of Anterior Cruciate Ligament Reconstruction Failure. A Radiographic and Video Analysis of the MARS Cohort

    PubMed Central

    Matava, Matthew J.; Arciero, Robert A.; Baumgarten, Keith M.; Carey, James L.; DeBerardino, Thomas M.; Hame, Sharon L.; Hannafin, Jo A.; Miller, Bruce S.; Nissen, Carl W.; Taft, Timothy N.; Wolf, Brian R.; Wright, Rick W.

    2015-01-01

    Background ACL reconstruction failure occurs in up to 10% of cases. Technical errors are considered the most common cause of graft failure despite the absence of validated studies. There is limited data regarding the agreement among orthopedic surgeons in terms of the etiology of primary ACL reconstruction failure and accuracy of graft tunnel placement. Purpose The purpose of this study is to test the hypothesis that experienced knee surgeons have a high level of inter-observer reliability in the agreement of the etiology of the primary ACL reconstruction failure, anatomical graft characteristics, tunnel placement. Methods Twenty cases of revision ACL reconstruction were randomly selected from the MARS database. Each case included the patient's history, standardized radiographs, and a concise 30-second arthroscopic video taken at the time of revision demonstrating the graft remnant and location of the tunnel apertures. 10 MARS surgeons not involved with the primary surgery reviewed all 20 cases. Each surgeon completed a two-part questionnaire dealing with each surgeon's training and practice as well as the placement of the femoral and tibial tunnels, condition of the primary graft, and the surgeon's opinion as to the etiology of graft failure. Inter-rater agreement was determined for each question. Inter-rater agreement was determined for each question with the kappa coefficient and prevalence adjusted bias adjusted kappa (PABAK). Results The 10 reviewers were in practice an average of 14 years. All performed at least 25 ACL reconstructions per year and 9 were fellowship-trained in sports medicine. There was wide variability in agreement among knee experts as to the specific etiology of ACL graft failure. When specifically asked about technical error as the cause for failure, inter-observer agreement was only slight (prevalence adjusted bias adjusted kappa [PABAK]: 0.26). There was fair overall agreement on ideal femoral tunnel placement (PABAK: 0.55), but only slight agreement whether a femoral tunnel was too anterior (PABAK: 0.24) and fair agreement whether it was too vertical (PABAK: 0.46). There was poor overall agreement for ideal tibial tunnel placement (PABAK: 0.17). Conclusion This study suggests that more objective criteria are needed to accurately determine the etiology of primary ACL graft failure as well as the ideal femoral and tibial tunnel placement in patients undergoing revision ACL reconstruction. PMID:25537942

  6. [Differential diagnosis and therapy of acute abdomen in sickle cell crisis. A rare case in visceral surgery].

    PubMed

    Zülke, C; Graeb, C; Rüschhoff, J; Wagner, H; Jauch, K W

    2000-01-01

    Surgical therapy of the acute abdomen often allows only limited time for differential diagnosis to confirm the indication for surgery. Under consideration of clinical aspects and case history both common and rare causes of an acute abdomen should be investigated without undue loss of time. Differential diagnostic considerations and eventual therapy are presented in the following case of a 25-year-old Afro-american who developed multiorgan failure after an initial course of lower-back pain. In addition to the clinical setting of an acute abdomen the patient presented with acute respiratory failure and laboratory signs of severe hemolysis in combination with newly detected splenomegaly. The indication for splenectomy was made following CT-proven complete splenic infarction due to repeated acute squestration. Histologic examination of the spleen together with hemoglobin electrophoresis confirmed the clinical assumption of unusually late primary manifestation of a sickle cell crisis. In the underlying case, the hemoglobinopathy was in fact the less common form of combined sickle-cell-beta-thalassemia. A ten-day course of intensive care therapy was necessary to treat ongoing multiorgan failure due to persistent sickle cell crisis. Current diagnostic and therapeutic procedures in connection with sickle cell crisis as a rare cause of an acute abdomen with the necessity for surgical intervention are presented.

  7. Taxonomy for Common-Cause Failure Vulnerability and Mitigation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wood, Richard Thomas; Korsah, Kofi; Mullens, James Allen

    2015-09-01

    Applying current guidance and practices for common-cause failure (CCF) mitigation to digital instrumentation and control (I&C) systems has proven problematic, and the regulatory environment has been unpredictable. The potential for CCF vulnerability inhibits I&C modernization, thereby challenging the long-term sustainability of existing plants. For new plants and advanced reactor concepts, concern about CCF vulnerability in highly integrated digital I&C systems imposes a design burden that results in higher costs and increased complexity. The regulatory uncertainty in determining which mitigation strategies will be acceptable (e.g., what diversity is needed and how much is sufficient) drives designers to adopt complicated, costly solutionsmore » devised for existing plants. To address the conditions that constrain the transition to digital I&C technology by the US nuclear industry, crosscutting research is needed to resolve uncertainty, demonstrate necessary characteristics, and establish an objective basis for qualification of digital technology for nuclear power plant (NPP) I&C applications. To fulfill this research need, Oak Ridge National Laboratory is investigating mitigation of CCF vulnerability for nuclear-qualified applications. The outcome of this research is expected to contribute to a fundamentally sound, comprehensive basis to qualify digital technology for nuclear power applications. This report documents the development of a CCF taxonomy. The basis for the CCF taxonomy was generated by determining consistent terminology and establishing a classification approach. The terminology is based on definitions from standards, guides, and relevant nuclear power industry technical reports. The classification approach is derived from identified classification schemes focused on I&C systems and key characteristics, including failure modes. The CCF taxonomy provides the basis for a systematic organization of key systems aspects relevant to analyzing the potential for CCF vulnerability and the suitability of mitigation techniques. Development of an effective CCF taxonomy will help to provide a framework for establishing the objective analysis and assessment capabilities desired to facilitate rigorous identification of fault types and triggers that are the fundamental elements of CCF.« less

  8. Could anterior papillary muscle partial necrosis explain early mitral valve repair failure?

    PubMed

    Pozzi, Matteo; Generali, Tommaso; Henaine, Roland; Mitchell, Julia; Lemaire, Anais; Chiari, Pascal; Fran, Jean; Obadia, Jean François

    2014-09-01

    Standardized techniques of mitral valve repair (MVR) have recently witnessed the introduction of a 'respect rather than resect' concept, the strategy of which involves the use of artificial chordae. MVR displays several advantages over mitral valve replacement in degenerative mitral regurgitation (MR), but the risk of reoperation for MVR failure must be taken into account. Different mechanisms could be advocated as the leading cause of MVR failure; procedure-related mechanisms are usually involved in early MVR failure, while valve-related mechanisms are common in late failure. Here, the case is reported of an early failure of MVR using artificial chordae that could be explained by an unusual procedure-related mechanism, namely anterior papillary muscle necrosis. MVR failure is a well-known complication after surgical repair of degenerative MR, but anterior papillary muscle partial necrosis might also be considered a possible mechanism of procedure-related MVR failure, especially when considering the increasing use of artificial chordae. Owing to the encouraging results obtained, mitral valve re-repair might be considered a viable solution, but must be selected after only a meticulous evaluation of the underlying mechanism of MVR failure.

  9. Proactive risk assessment of blood transfusion process, in pediatric emergency, using the Health Care Failure Mode and Effects Analysis (HFMEA).

    PubMed

    Dehnavieh, Reza; Ebrahimipour, Hossein; Molavi-Taleghani, Yasamin; Vafaee-Najar, Ali; Noori Hekmat, Somayeh; Esmailzdeh, Hamid

    2014-12-25

    Pediatric emergency has been considered as a high risk area, and blood transfusion is known as a unique clinical measure, therefore this study was conducted with the purpose of assessing the proactive risk assessment of blood transfusion process in Pediatric Emergency of Qaem education- treatment center in Mashhad, by the Healthcare Failure Mode and Effects Analysis (HFMEA) methodology. This cross-sectional study analyzed the failure mode and effects of blood transfusion process by a mixture of quantitative-qualitative method. The proactive HFMEA was used to identify and analyze the potential failures of the process. The information of the items in HFMEA forms was collected after obtaining a consensus of experts' panel views via the interview and focus group discussion sessions. The Number of 77 failure modes were identified for 24 sub-processes enlisted in 8 processes of blood transfusion. Totally 13 failure modes were identified as non-acceptable risk (a hazard score above 8) in the blood transfusion process and were transferred to the decision tree. Root causes of high risk modes were discussed in cause-effect meetings and were classified based on the UK national health system (NHS) approved classifications model. Action types were classified in the form of acceptance (11.6%), control (74.2%) and elimination (14.2%). Recommendations were placed in 7 categories using TRIZ ("Theory of Inventive Problem Solving.") The re-engineering process for the required changes, standardizing and updating the blood transfusion procedure, root cause analysis of blood transfusion catastrophic events, patient identification bracelet, training classes and educational pamphlets for raising awareness of personnel, and monthly gathering of transfusion medicine committee have all been considered as executive strategies in work agenda in pediatric emergency.

  10. Proactive Risk Assessment of Blood Transfusion Process, in Pediatric Emergency, Using the Health Care Failure Mode and Effects Analysis (HFMEA)

    PubMed Central

    Dehnavieh, Reza; Ebrahimipour, Hossein; Molavi-Taleghani, Yasamin; Vafaee-Najar, Ali; Hekmat, Somayeh Noori; Esmailzdeh, Hamid

    2015-01-01

    Introduction: Pediatric emergency has been considered as a high risk area, and blood transfusion is known as a unique clinical measure, therefore this study was conducted with the purpose of assessing the proactive risk assessment of blood transfusion process in Pediatric Emergency of Qaem education- treatment center in Mashhad, by the Healthcare Failure Mode and Effects Analysis (HFMEA) methodology. Methodology: This cross-sectional study analyzed the failure mode and effects of blood transfusion process by a mixture of quantitative-qualitative method. The proactive HFMEA was used to identify and analyze the potential failures of the process. The information of the items in HFMEA forms was collected after obtaining a consensus of experts’ panel views via the interview and focus group discussion sessions. Results: The Number of 77 failure modes were identified for 24 sub-processes enlisted in 8 processes of blood transfusion. Totally 13 failure modes were identified as non-acceptable risk (a hazard score above 8) in the blood transfusion process and were transferred to the decision tree. Root causes of high risk modes were discussed in cause-effect meetings and were classified based on the UK national health system (NHS) approved classifications model. Action types were classified in the form of acceptance (11.6%), control (74.2%) and elimination (14.2%). Recommendations were placed in 7 categories using TRIZ (“Theory of Inventive Problem Solving.”) Conclusion: The re-engineering process for the required changes, standardizing and updating the blood transfusion procedure, root cause analysis of blood transfusion catastrophic events, patient identification bracelet, training classes and educational pamphlets for raising awareness of personnel, and monthly gathering of transfusion medicine committee have all been considered as executive strategies in work agenda in pediatric emergency. PMID:25560332

  11. Application of ISO22000 and Failure Mode and Effect Analysis (fmea) for Industrial Processing of Poultry Products

    NASA Astrophysics Data System (ADS)

    Varzakas, Theodoros H.; Arvanitoyannis, Ioannis S.

    Failure Mode and Effect Analysis (FMEA) model has been applied for the risk assessment of poultry slaughtering and manufacturing. In this work comparison of ISO22000 analysis with HACCP is carried out over poultry slaughtering, processing and packaging. Critical Control points and Prerequisite programs (PrPs) have been identified and implemented in the cause and effect diagram (also known as Ishikawa, tree diagram and fishbone diagram).

  12. Effects of Obesity on Cardiovascular Hemodynamics, Cardiac Morphology, and Ventricular Function.

    PubMed

    Alpert, Martin A; Omran, Jad; Bostick, Brian P

    2016-12-01

    Obesity produces a variety of hemodynamic alterations that may cause changes in cardiac morphology which predispose to left and right ventricular dysfunction. Various neurohormonal and metabolic alterations commonly associated with obesity may contribute to these abnormalities of cardiac structure and function. These changes in cardiovascular hemodynamics, cardiac morphology, and ventricular function may, in severely obese patients, predispose to heart failure, even in the absence of other forms of heart disease (obesity cardiomyopathy). In normotensive obese patients, cardiac involvement is commonly characterized by elevated cardiac output, low peripheral vascular resistance, and increased left ventricular (LV) end-diastolic pressure. Sleep-disordered breathing may lead to pulmonary arterial hypertension and, in association with left heart failure, may contribute to elevation of right heart pressures. These alterations, in association with various neurohormonal and metabolic abnormalities, may produce LV hypertrophy; impaired LV diastolic function; and less commonly, LV systolic dysfunction. Many of these alterations are reversible with substantial voluntary weight loss.

  13. Space Shuttle Main Engine structural analysis and data reduction/evaluation. Volume 1: Aft Skirt analysis

    NASA Technical Reports Server (NTRS)

    Berry, David M.; Stansberry, Mark

    1989-01-01

    Using the ANSYS finite element program, a global model of the aft skirt and a detailed nonlinear model of the failure region was made. The analysis confirmed the area of failure in both STA-2B and STA-3 tests as the forging heat affected zone (HAZ) at the aft ring centerline. The highest hoop strain in the HAZ occurs in this area. However, the analysis does not predict failure as defined by ultimate elongation of the material equal to 3.5 percent total strain. The analysis correlates well with the strain gage data from both the Wyle influence test of the original design aft sjirt and the STA-3 test of the redesigned aft skirt. it is suggested that the sensitivity of the failure area material strength and stress/strain state to material properties and therefore to small manufacturing or processing variables is the most likely cause of failure below the expected material ultimate properties.

  14. Observations of indirect filial cannibalism in response to nest failure of Black-crowned Night-Herons (Nycticorax nycticorax)

    USGS Publications Warehouse

    Brussee, Brianne E.; Coates, Peter S.; Dwight, Ian; Young, Laura G.

    2017-01-01

    During 2011, four separate instances of indirect filial cannibalism, whereby adults consumed their young that died from unknown causes, were observed using video-monitoring techniques in a nesting colony of Black-crowned Night-Herons (Nycticorax nycticorax) on Alcatraz Island. Though they were not observed actively killing their young, in all four observations adult Black-crowned Night-Herons consumed their young following death (i.e., indirect filial cannibalism). We could not determine cause of chick mortality, but parental neglect was likely a contributing factor in at least two instances. Indirect filial cannibalism is not commonly documented among birds, and understanding how cannibalism contributes to nest failure can help researchers better understand factors that limit nesting populations.

  15. Pyroglutamic acidosis in association with therapeutic paracetamol use.

    PubMed

    Hunter, Robert W; Lawson, Cate; Galitsiou, Evangelia; Gifford, Fiona; Neary, John J

    2016-12-01

    Long-term use of paracetamol (at therapeutic doses) can cause the accumulation of endogenous organic pyroglutamate, resulting in metabolic acidosis with an elevated anion gap. This occurs in the presence of malnutrition, infection, antibiotic use, renal failure and pregnancy. Given the prevalence of these risk factors, this condition is thought to be relatively common in a hospitalised population but is probably significantly underdiagnosed. Prompt recognition is essential because the condition is entirely reversible if the causative agents are withdrawn.Here we describe five cases of pyroglutamic acidosis that we have encountered in a tertiary referral hospital. Together they illustrate the common clinical risk factors and the excellent prognosis, once a diagnosis is made. We describe how a rudimentary acid-base analysis (calculation of the anion gap) usually leads to the diagnosis but how a more nuanced approach may be required in the presence of mixed acid-base disorders. © Royal College of Physicians 2016. All rights reserved.

  16. Hypercalcemic Disorders in Children

    PubMed Central

    Stokes, Victoria J; Nielsen, Morten F; Hannan, Fadil M

    2017-01-01

    ABSTRACT Hypercalcemia is defined as a serum calcium concentration that is greater than two standard deviations above the normal mean, which in children may vary with age and sex, reflecting changes in the normal physiology at each developmental stage. Hypercalcemic disorders in children may present with hypotonia, poor feeding, vomiting, constipation, abdominal pain, lethargy, polyuria, dehydration, failure to thrive, and seizures. In severe cases renal failure, pancreatitis and reduced consciousness may also occur and older children and adolescents may present with psychiatric symptoms. The causes of hypercalcemia in children can be classified as parathyroid hormone (PTH)‐dependent or PTH‐independent, and may be congenital or acquired. PTH‐independent hypercalcemia, ie, hypercalcemia associated with a suppressed PTH, is commoner in children than PTH‐dependent hypercalcemia. Acquired causes of PTH‐independent hypercalcemia in children include hypervitaminosis; granulomatous disorders, and endocrinopathies. Congenital syndromes associated with PTH‐independent hypercalcemia include idiopathic infantile hypercalcemia (IIH), William's syndrome, and inborn errors of metabolism. PTH‐dependent hypercalcemia is usually caused by parathyroid tumors, which may give rise to primary hyperparathyroidism (PHPT) or tertiary hyperparathyroidism, which usually arises in association with chronic renal failure and in the treatment of hypophosphatemic rickets. Acquired causes of PTH‐dependent hypercalcemia in neonates include maternal hypocalcemia and extracorporeal membrane oxygenation. PHPT usually occurs as an isolated nonsyndromic and nonhereditary endocrinopathy, but may also occur as a hereditary hypercalcemic disorder such as familial hypocalciuric hypercalcemia, neonatal severe primary hyperparathyroidism, and familial isolated primary hyperparathyroidism, and less commonly, as part of inherited complex syndromic disorders such as multiple endocrine neoplasia (MEN). Advances in identifying the genetic causes have resulted in increased understanding of the underlying biological pathways and improvements in diagnosis. The management of symptomatic hypercalcemia includes interventions such as fluids, antiresorptive medications, and parathyroid surgery. This article presents a clinical, biochemical, and genetic approach to investigating the causes of pediatric hypercalcemia. © 2017 The Authors. Journal of Bone and Mineral Research Published by Wiley Periodicals Inc. PMID:28914984

  17. Hypercalcemic Disorders in Children.

    PubMed

    Stokes, Victoria J; Nielsen, Morten F; Hannan, Fadil M; Thakker, Rajesh V

    2017-11-01

    Hypercalcemia is defined as a serum calcium concentration that is greater than two standard deviations above the normal mean, which in children may vary with age and sex, reflecting changes in the normal physiology at each developmental stage. Hypercalcemic disorders in children may present with hypotonia, poor feeding, vomiting, constipation, abdominal pain, lethargy, polyuria, dehydration, failure to thrive, and seizures. In severe cases renal failure, pancreatitis and reduced consciousness may also occur and older children and adolescents may present with psychiatric symptoms. The causes of hypercalcemia in children can be classified as parathyroid hormone (PTH)-dependent or PTH-independent, and may be congenital or acquired. PTH-independent hypercalcemia, ie, hypercalcemia associated with a suppressed PTH, is commoner in children than PTH-dependent hypercalcemia. Acquired causes of PTH-independent hypercalcemia in children include hypervitaminosis; granulomatous disorders, and endocrinopathies. Congenital syndromes associated with PTH-independent hypercalcemia include idiopathic infantile hypercalcemia (IIH), William's syndrome, and inborn errors of metabolism. PTH-dependent hypercalcemia is usually caused by parathyroid tumors, which may give rise to primary hyperparathyroidism (PHPT) or tertiary hyperparathyroidism, which usually arises in association with chronic renal failure and in the treatment of hypophosphatemic rickets. Acquired causes of PTH-dependent hypercalcemia in neonates include maternal hypocalcemia and extracorporeal membrane oxygenation. PHPT usually occurs as an isolated nonsyndromic and nonhereditary endocrinopathy, but may also occur as a hereditary hypercalcemic disorder such as familial hypocalciuric hypercalcemia, neonatal severe primary hyperparathyroidism, and familial isolated primary hyperparathyroidism, and less commonly, as part of inherited complex syndromic disorders such as multiple endocrine neoplasia (MEN). Advances in identifying the genetic causes have resulted in increased understanding of the underlying biological pathways and improvements in diagnosis. The management of symptomatic hypercalcemia includes interventions such as fluids, antiresorptive medications, and parathyroid surgery. This article presents a clinical, biochemical, and genetic approach to investigating the causes of pediatric hypercalcemia. © 2017 American Society for Bone and Mineral Research. © 2017 American Society for Bone and Mineral Research.

  18. Unusual presentation of cactus spines in the flank of an elderly man: a case report

    PubMed Central

    2010-01-01

    Introduction Splinters and spines of plant matter are common foreign bodies in skin wounds of the extremities, and often present embedded in the dermis or subcutaneous tissue. Vegetative foreign bodies are highly inflammatory and, if not completely removed, can cause infection, toxic reactions, or granuloma formation. Older patients are at increased risk for infection from untreated plant foreign bodies. The most common error in plant splinter and spine management is failure to detect their presence. Case presentation Here we report a case of cactus spines in an 84-year-old Caucasian man presenting on the right flank as multiple, red papules with spiny extensions. This presentation was unusual both in location and the spinous character of the lesions, and only after punch biopsy analysis was a diagnosis of cactus matter spines made. Conclusions Our patient presented with an unusual case of cactus spines that required histopathology for identification. Skin lesions with neglected foreign bodies are a common cause of malpractice claims. If not removed, foreign bodies of the skin, particularly in elderly individuals, can result in inflammatory and infectious sequela. This report underscores the importance of thoroughly evaluating penetrating skin lesions for the presence of foreign bodies, such as splinters and spines. PMID:20500838

  19. Endocrine causes of calcium disorders.

    PubMed

    Greco, Deborah S

    2012-11-01

    Endocrine diseases that may cause hypercalcemia and hypocalcemia include hyperparathyroidism, hypoparathyroidism, thyroid disorders, hyperadrenocorticism, hypoadrenocorticism, and less commonly pheochromocytoma and multiple endocrine neoplasias. The differential diagnosis of hypercalcemia may include malignancy (lymphoma, anal sac carcinoma, and squamous cell carcinoma), hyperparathyroidism, vitamin D intoxication, chronic renal disease, hypoadrenocorticism, granulomatous disorders, osteolysis, or spurious causes. Hypocalcemia may be caused by puerperal tetany, pancreatitis, intestinal malabsorption, ethlyene glycol intoxication, acute renal failure, hypopararthyroidism, hypovitaminosis D, hypomagnesemia, and low albumin. This article focuses on the endocrine causes of calcium imbalance and provides diagnostic and therapeutic guidelines for identifying the cause of hypercalcemia and hypocalcemia in veterinary patients. Copyright © 2012 Elsevier Inc. All rights reserved.

  20. A clinical study of pattern and factors affecting outcome in Nigerian patients with advanced heart failure.

    PubMed

    Familoni, O B; Olunuga, T O; Olufemi, B W

    2007-01-01

    Advanced heart failure (AHF) accounts for about 25% of all cases of heart failure in Nigeria and is associated with a high mortality rate. To undertake a clinical study of the pattern and outcome of AHF in our hospitalised patients and to determine the parameters associated with mortality and survival in these patients. Eighty-two patients with AHF were studied between January 2003 and December 2005. Baseline blood chemistry and haemodynamics were determined. A congestion score, including orthopnoea, elevated jugular venous pressure, oedema, ascites and loud P2, was derived as well as a low perfusion score. Mortality was computed and risk estimated using the Pearson coefficient and log-ranking test. Cox regression analysis was used to identify the predictors of survival. AHF accounted for 43.6% of all hospitalised heart failure patients, with a total mortality of 67.1%. Hypertension was the commonest cause of AHF. The parameters associated with increased mortality rates included age (r = 0.671; p = 0.02), presence of atrial fibrillation (r = 0.532; p = 0.045) and estimated glomerular filtration rate (r = -0.486, p = 0.04). The majority of patients (54.8%) were in the 'wet and cold' congestion category. The congestion score correlated with mortality. The indices of survival included lower age, lower systolic blood pressure, being literate and lower congestion score. AHF was common in our cohorts of hospitalised heart failure patients and it was associated with a high mortality rate.

  1. Abduction of Toe-excavation Induced Failure Process from LEM and FDM for a Dip Slope with Rock Anchorage in Taiwan

    NASA Astrophysics Data System (ADS)

    Huang, W.-S.; Lin, M.-L.; Liu, H.-C.; Lin, H.-H.

    2012-04-01

    On April 25, 2010, without rainfall and earthquake triggering a massive landslide (200000 m3) covered a 200m stretch of Taiwan's National Freeway No. 3, killing 4 people, burying three cars and destroying a bridge. The failure mode appears to be a dip-slope type failure occurred on a rock anchorage cut slope. The strike of Tertiary sedimentary strata is northeast-southwest and dip 15˚ toward southeast. Based on the investigations of Taiwan Geotechnical Society, there are three possible factors contributing to the failure mechanism as follow:(1) By toe-excavation during construction in 1998, the daylight of the sliding layer had induced the strength reduction in the sliding layer. It also caused the loadings of anchors increased rapidly and approached to their ultimate capacity; (2) Although the excavated area had stabilized soon with rock anchors and backfills, the weathering and groundwater infiltration caused the strength reduction of overlying rock mass; (3) The possible corrosion and age of the ground anchors deteriorate the loading capacity of rock anchors. Considering the strength of sliding layer had reduced from peak to residual strength which was caused by the disturbance of excavation, the limit equilibrium method (LEM) analysis was utilized in the back analysis at first. The results showed the stability condition of slope approached the critical state (F.S.≈1). The efficiency reduction of rock anchors and strength reduction of overlying stratum (sandstone) had been considered in following analysis. The results showed the unstable condition (F.S. <1). This research also utilized the result of laboratory test, geological strength index(GSI) and finite difference method (FDM, FLAC 5.0) to discuss the failure process with the interaction of disturbance of toe-excavation, weathering of rock mass, groundwater infiltration and efficiency reduction of rock anchors on the stability of slope. The analysis indicated that the incremental load of anchors have similar tendency comparing to the monitoring records in toe-excavation stages. This result showed that the strength of the sliding layer was significantly influenced by toe-excavation. The numerical model which calibrated with monitoring records in excavation stage was then used to discuss the failure process after backfilling. The results showed the interaction of different factors into the failure process. Keyword: Dip slope failure, rock anchor, LEM, FDM, GSI, back analysis

  2. Weighted Fuzzy Risk Priority Number Evaluation of Turbine and Compressor Blades Considering Failure Mode Correlations

    NASA Astrophysics Data System (ADS)

    Gan, Luping; Li, Yan-Feng; Zhu, Shun-Peng; Yang, Yuan-Jian; Huang, Hong-Zhong

    2014-06-01

    Failure mode, effects and criticality analysis (FMECA) and Fault tree analysis (FTA) are powerful tools to evaluate reliability of systems. Although single failure mode issue can be efficiently addressed by traditional FMECA, multiple failure modes and component correlations in complex systems cannot be effectively evaluated. In addition, correlated variables and parameters are often assumed to be precisely known in quantitative analysis. In fact, due to the lack of information, epistemic uncertainty commonly exists in engineering design. To solve these problems, the advantages of FMECA, FTA, fuzzy theory, and Copula theory are integrated into a unified hybrid method called fuzzy probability weighted geometric mean (FPWGM) risk priority number (RPN) method. The epistemic uncertainty of risk variables and parameters are characterized by fuzzy number to obtain fuzzy weighted geometric mean (FWGM) RPN for single failure mode. Multiple failure modes are connected using minimum cut sets (MCS), and Boolean logic is used to combine fuzzy risk priority number (FRPN) of each MCS. Moreover, Copula theory is applied to analyze the correlation of multiple failure modes in order to derive the failure probabilities of each MCS. Compared to the case where dependency among multiple failure modes is not considered, the Copula modeling approach eliminates the error of reliability analysis. Furthermore, for purpose of quantitative analysis, probabilities importance weight from failure probabilities are assigned to FWGM RPN to reassess the risk priority, which generalize the definition of probability weight and FRPN, resulting in a more accurate estimation than that of the traditional models. Finally, a basic fatigue analysis case drawn from turbine and compressor blades in aeroengine is used to demonstrate the effectiveness and robustness of the presented method. The result provides some important insights on fatigue reliability analysis and risk priority assessment of structural system under failure correlations.

  3. Relationship between Test Anxiety and Academic Achievement among Undergraduate Nursing Students

    ERIC Educational Resources Information Center

    Dawood, Eman; Al Ghadeer, Hind; Mitsu, Rufa; Almutary, Nadiah; Alenezi, Brouj

    2016-01-01

    Introduction: Anxiety is a common phenomenon that constitutes a universal cause of poor academic performance among students worldwide. It is a kind of self preoccupation which is manifested as self-minimization and results in negative cognitive evaluation, lack of concentration, unfavorable physiological reactions and academic failure. Test…

  4. The interpretation and management of abnormal liver function tests.

    PubMed

    Simpson, M A; Freshwater, D A

    2015-01-01

    Liver function tests (LFTs) are frequently requested as part of routine health assessments on serving members of the Royal Navy (RN). In common with many investigations there are a number of abnormal results in healthy individuals (0.5 - 9% depending on test and study population). There are established patterns of LFT derangement such as cholestatic derangement, hepatocellular derangement, and failure of synthetic function. There can be indicators to the cause of the derangement by assessing the ratios of elevated assays in relation to one another. This article aims to address the definition, potential causes and further investigation of common patterns of LFT derangement found in primary care in the RN.

  5. Post-Transplant Hypophosphatemia and the Risk of Death-Censored Graft Failure and Mortality after Kidney Transplantation.

    PubMed

    van Londen, Marco; Aarts, Brigitte M; Deetman, Petronella E; van der Weijden, Jessica; Eisenga, Michele F; Navis, Gerjan; Bakker, Stephan J L; de Borst, Martin H

    2017-08-07

    Hypophosphatemia is common in the first year after kidney transplantation, but its clinical implications are unclear. We investigated the relationship between the severity of post-transplant hypophosphatemia and mortality or death-censored graft failure in a large cohort of renal transplant recipients with long-term follow-up. We performed a longitudinal cohort study in 957 renal transplant recipients who were transplanted between 1993 and 2008 at a single center. We used a large real-life dataset containing 28,178 phosphate measurements (median of 27; first to third quartiles, 23-34) serial measurements per patient) and selected the lowest intraindividual phosphate level during the first year after transplantation. The primary outcomes were all-cause mortality, cardiovascular mortality, and death-censored graft failure. The median (interquartile range) intraindividual lowest phosphate level was 1.58 (1.30-1.95) mg/dl, and it was reached at 33 (21-51) days post-transplant. eGFR was the main correlate of the lowest serum phosphate level (model R 2 =0.32). During 9 (5-12) years of follow-up, 181 (19%) patients developed graft failure, and 295 (35%) patients died, of which 94 (32%) deaths were due to cardiovascular disease. In multivariable Cox regression analysis, more severe hypophosphatemia was associated with a lower risk of death-censored graft failure (fully adjusted hazard ratio, 0.61; 95% confidence interval, 0.43 to 0.88 per 1 mg/dl lower serum phosphate) and cardiovascular mortality (fully adjusted hazard ratio, 0.37; 95% confidence interval, 0.22 to 0.62) but not noncardiovascular mortality (fully adjusted hazard ratio, 1.33; 95% confidence interval, 0.9 to 1.96) or all-cause mortality (fully adjusted hazard ratio, 1.15; 95% confidence interval, 0.81 to 1.61). Post-transplant hypophosphatemia develops early after transplantation. These data connect post-transplant hypophosphatemia with favorable long-term graft and patient outcomes. Copyright © 2017 by the American Society of Nephrology.

  6. Using fault tree analysis to identify causes of non-compliance: enhancing violation outcome data for the purposes of education and prevention.

    PubMed

    Emery, R J; Charlton, M A; Orders, A B; Hernandez, M

    2001-02-01

    An enhanced coding system for the characterization of notices of violation (NOV's) issued to radiation permit holders in the State of Texas was developed based on a series of fault tree analyses serving to identify a set of common causes. The coding system enhancement was retroactively applied to a representative sample (n = 185) of NOV's issued to specific licensees of radioactive materials in Texas during calendar year 1999. The results obtained were then compared to the currently available summary NOV information for the same year. In addition to identifying the most common NOV's, the enhanced coding system revealed that approximately 70% of the sampled NOV's were issued for non-compliance with a specific regulation as opposed to a permit condition. Furthermore, an underlying cause of 94% of the NOV's was the failure on the part of the licensee to execute a specific task. The findings suggest that opportunities exist to improve permit holder compliance through various means, including the creation of summaries which detail specific tasks to be completed, and revising training programs with more focus on the identification and scheduling of permit-related requirements. Broad application of these results is cautioned due to the bias associated with the restricted scope of the project.

  7. [Dialysis and ultrafiltration therapy in patients with cardio-renal syndrome: recommendations of the working group "heart-kidney" of the German Cardiac Society and the German Society of Nephrology].

    PubMed

    Schwenger, V; Remppis, B A; Westenfeld, R; Weinreich, T; Brunkhorst, R; Schieren, G; Krumme, B; Haller, H; Schmieder, R; Schlieper, G; Frye, B; Hoppe, U C; Hoyer, J; Keller, T; Blumenstein, M; Schunkert, H; Mahfoud, F; Rump, L C

    2014-02-01

    Renal failure is common in patients with severe heart failure. This complex pathophysiological interaction has been classified as cardio-renal syndrome. In these patients hydropic decompensation is the main cause of hospitalization. In patients with refractory heart failure, characterized by diuretic resistance and congestion due to volume overload, ultrafiltration has to be considered. In acute decompensated heart failure with worsening of renal function, extracorporeal ultrafiltration is the preferred treatment modality. On the other hand, patients suffering from chronic decompensated heart failure, particularly patients with ascites, will profit from the treatment specific advantages of peritoneal ultrafiltration. Prerequisite for an optimized care of patients with cardio-renal syndrome is the close collaboration among intensive care doctors, cardiologists and nephrologists. © Georg Thieme Verlag KG Stuttgart · New York.

  8. Effects of renin-angiotensin-aldosterone system inhibitors on mortality, hospitalization, and diastolic function in patients with HFpEF. A meta-analysis of 13 randomized controlled trials.

    PubMed

    Zhang, Q; Chen, Y; Liu, Q; Shan, Q

    2016-02-01

    The purpose of this meta-analysis was to evaluate the effects of renin-angiotensin-aldosterone system (RAAS) inhibitors on mortality, hospitalization, diastolic function, and exercise capacity in heart failure with preserved ejection fraction (HFpEF). Thirteen randomized controlled trials (RCTs), totaling 12,532 patients with HFpEF, were selected. All-cause and cardiovascular mortality, all-cause and heart failure-related hospitalization, diastolic function, and the 6-min walk distance were assessed. The risk ratios (RR) of the dichotomous data, weighted mean difference (WMD) of continuous data, and 95 % confidence intervals (CI) were calculated to assess the effects of RAAS inhibitors. RAAS inhibitors significantly decreased heart failure-related hospitalization (RR 0.89; 95 % CI 0.82-0.97; p = 0.01) and improved the diastolic function, as reflected in a reduced E/e' index (MD -1.38; 95 % CI -2.01 to -0.74; p < 0.0001). However, there were no beneficial effects on all-cause cardiovascular mortality and all-cause hospitalization. Other diastolic parameters had few changes compared with the controls. The 6-min walk distance was not improved by the use of RAAS inhibitors. In patients with HFpEF, RAAS inhibitors decreased heart-failure hospitalization and the E/e' index without affecting mortality, all-cause hospitalization, other diastolic function parameters, and the 6-min walk distance.

  9. Causes, Clinical Features, and Outcomes From a Prospective Study of Drug-Induced Liver Injury in the United States

    PubMed Central

    Chalasani, Naga; Fontana, Robert J.; Bonkovsky, Herbert L.; Watkins, Paul B.; Davern, Timothy; Serrano, Jose; Yang, Hongqiu; Rochon, James

    2013-01-01

    Background & Aims Idiosyncratic drug-induced liver injury (DILI) is among the most common causes of acute liver failure in the United States, accounting for approximately 13% of cases. A prospective study was begun in 2003 to recruit patients with suspected DILI and create a repository of biological samples for analysis. This report summarizes the causes, clinical features, and outcomes from the first 300 patients enrolled. Methods Patients with suspected DILI were enrolled based on predefined criteria and followed up for at least 6 months. Patients with acetaminophen liver injury were excluded. Results DILI was caused by a single prescription medication in 73% of the cases, by dietary supplements in 9%, and by multiple agents in 18%. More than 100 different agents were associated with DILI; antimicrobials (45.5%) and central nervous system agents (15%) were the most common. Causality was considered to be definite in 32%, highly likely in 41%, probable in 14%, possible in 10%, and unlikely in 3%. Acute hepatitis C virus (HCV) infection was the final diagnosis in 4 of 9 unlikely cases. Six months after enrollment, 14% of patients had persistent laboratory abnormalities and 8% had died; the cause of death was liver related in 44% Conclusions DILI is caused by a wide array of medications, herbal supplements, and dietary supplements. Antibiotics are the single largest class of agents that cause DILI. Acute HCV infection should be excluded in patients with suspected DILI by HCV RNA testing. The overall 6-month mortality was 8%, but the majority of deaths were not liver related. PMID:18955056

  10. A Rare Cause of Death in a Woman: Iatrogenic Bladder Rupture in a Patient With an Indwelling Foley Catheter

    PubMed Central

    Paul, Anthea B. Mahesan; Simms, Lary; Paul, Abraham E.; Mahesan, Andrew A.; Ramzanali, Ammani

    2016-01-01

    The CDC estimates that 12–25% of all hospitalized patients receive a urinary catheter during their hospital stay. Foley catheter failure is uncommon and Foley catheter failure associated with iatrogenic urinary bladder rupture (IUBR) is extremely rare. Symptoms are often nonspecific and thus misdiagnosis and delayed treatment is common. In this case report, we present a case of IUBR in a woman from Foley catheter failure, which ultimately led to her demise. This case adds to the literature the importance of suspicion for IUBR in patients with indwelling Foley catheters presenting with lower abdominal pain, hematuria, and decreased urine output. PMID:27175339

  11. Application of Six Sigma methodology to a diagnostic imaging process.

    PubMed

    Taner, Mehmet Tolga; Sezen, Bulent; Atwat, Kamal M

    2012-01-01

    This paper aims to apply the Six Sigma methodology to improve workflow by eliminating the causes of failure in the medical imaging department of a private Turkish hospital. Implementation of the design, measure, analyse, improve and control (DMAIC) improvement cycle, workflow chart, fishbone diagrams and Pareto charts were employed, together with rigorous data collection in the department. The identification of root causes of repeat sessions and delays was followed by failure, mode and effect analysis, hazard analysis and decision tree analysis. The most frequent causes of failure were malfunction of the RIS/PACS system and improper positioning of patients. Subsequent to extensive training of professionals, the sigma level was increased from 3.5 to 4.2. The data were collected over only four months. Six Sigma's data measurement and process improvement methodology is the impetus for health care organisations to rethink their workflow and reduce malpractice. It involves measuring, recording and reporting data on a regular basis. This enables the administration to monitor workflow continuously. The improvements in the workflow under study, made by determining the failures and potential risks associated with radiologic care, will have a positive impact on society in terms of patient safety. Having eliminated repeat examinations, the risk of being exposed to more radiation was also minimised. This paper supports the need to apply Six Sigma and present an evaluation of the process in an imaging department.

  12. Conquering common breast-feeding problems.

    PubMed

    Walker, Marsha

    2008-01-01

    Meeting mothers' personal breast-feeding goals depends on a number of factors, including the timely resolution of any problems she encounters. Nurses are often the first providers who interact with the mother during the perinatal period and are positioned to guide mothers through the prevention and solving of breast-feeding problems. Although many problems may be "common," failure to remedy conditions that cause pain, frustration, and anxiety can lead to premature weaning and avoidance of breast-feeding subsequent children. This article describes strategies and interventions to alleviate common problems that breast-feeding mothers frequently encounter.

  13. Evaluation of Effect of Zirconia Surface Treatment, Using Plasma of Argon and Silane, on the Shear Bond Strength of Two Composite Resin Cements

    PubMed Central

    Ramdev, Poojya; Shruthi, C S

    2017-01-01

    Introduction Yttria stabilised tetragonal zirconia opens new vistas for all ceramic restoration by the mechanism of transformation toughening, making it much stronger compared to all other ceramic materials. Currently, it is the most recent core material for all ceramic fixed partial dentures due to its ability to withstand high simulated masticatory loads. Problems which have been reported with zirconia restorations involve the core cement interface leading to loss of retention of the prosthesis. Different reasons which have been reported for the same include the lack of adhesion between zirconia and commonly used cements due to absence of silica phase which makes zirconia not etchable. In addition, the hydrophobic nature of zirconia causes low wettability of zirconia surface by the adhesive cements which are commonly used. Aim The purpose of this in vitro study was to compare and evaluate the effect of two pre-treatments of zirconia, using plasma of argon and silane, on the shear bond strength values of two composite resin cements to zirconia and to evaluate the failure pattern of the debonded areas using stereomicroscopic analysis. Materials and Methods Sixty zirconia discs (10 mm×2 mm) were randomly divided into three groups (n=20), following surface treatment, with airborne particle abrasion, using 110 µm Al2O3: Group I (control), Group II (plasma of argon cleaning), and Group III (application of silane primer). Each group had two subgroups based on the type of resin cement used for bonding: subgroup A; Rely X Ultimate (3M ESPE) and subgroup B; Panavia F (Kuraray). In subgroup A, Rely X universal silane primer and in subgroup B Clearfil ceramic primer was used. Shear bond strengths were determined after water storage for one day and thermocycling for 5000 cycles. Data (megapascal) were analyzed using ANOVA and Bonferroni test. Specimens were subjected to stereomicroscopic analysis, for evaluation of failure pattern. Results Group III produced the highest shear bond strength followed by Group II and Group I. Subgroup A showed higher shear bond strength than Subgroup B. Stereomicroscopic analysis showed cohesive failure in Group III, while in Group I adhesive failure was seen. Conclusion Silane primer application caused maximum increase in shear bond strength due to increased wettability. Argon plasma treatment was less effective in comparison to silane treatment. Air abrasion when used alone resulted in lower bond strength values, thereby making it necessary to use a combination of surface treatments. Rely X Ultimate cement was superior to Panavia F in terms of adhesive bonding to zirconia. PMID:28969271

  14. Analysis of Failures of High Speed Shaft Bearing System in a Wind Turbine

    NASA Astrophysics Data System (ADS)

    Wasilczuk, Michał; Gawarkiewicz, Rafał; Bastian, Bartosz

    2018-01-01

    During the operation of wind turbines with gearbox of traditional configuration, consisting of one planetary stage and two helical stages high failure rate of high speed shaft bearings is observed. Such a high failures frequency is not reflected in the results of standard calculations of bearing durability. Most probably it can be attributed to atypical failure mechanism. The authors studied problems in 1.5 MW wind turbines of one of Polish wind farms. The analysis showed that the problems of high failure rate are commonly met all over the world and that the statistics for the analysed turbines were very similar. After the study of potential failure mechanism and its potential reasons, modification of the existing bearing system was proposed. Various options, with different bearing types were investigated. Different versions were examined for: expected durability increase, extent of necessary gearbox modifications and possibility to solve existing problems in operation.

  15. SBDS Protein Expression Patterns in the Bone Marrow

    PubMed Central

    Wong, Trisha E.; Calicchio, Monica L.; Fleming, Mark D.; Shimamura, Akiko; Harris, Marian H.

    2010-01-01

    Shwachman Diamond Syndrome (SDS) is an inherited bone marrow failure syndrome caused by biallelic SBDS gene mutations. Here we examined SBDS protein levels in human bone marrow. SBDS protein expression was high in neutrophil progenitors, megakaryocytes, plasma cells and osteoblasts. In contrast, SBDS protein levels were low in all hematopoietic cell lineages from patients harboring the common SBDS mutations. We conclude that SBDS protein levels vary widely between specific marrow lineages. Uniformly low SBDS protein expression levels distinguish the majority of SDS patients from controls or other marrow failure syndromes. PMID:20658628

  16. Thrombotic microangiopathy: An unusual cause of renal failure in rheumatoid arthritis.

    PubMed

    Sakthirajan, R; Dhanapriya, J; Dineshkumar, T; Gopalakrishnan, N; Murugan, S; Balasubramaniyan, T

    2017-01-01

    Rheumatoid arthritis (RA) is one of the commonest rheumatological diseases. Renal involvement is not common but can occur as a result of chronic inflammation as part of disease process or drug toxicity. Thrombotic microangiopathy (TMA) is characterized by microangiopathic hemolytic anemia, thrombocytopenia, and organ failure of variable severity. Only a few cases of TMA in patients with RA were reported to date. We describe a 45-year-old female patient with RA who presented with oliguria and edema. Renal biopsy showed TMA with patchy cortical necrosis. She improved with hemodialysis and plasmapheresis.

  17. ANEMIA OF CENTRAL ORIGIN

    PubMed Central

    Ishii, Kazusa; Young, Neal S.

    2015-01-01

    Hypoproliferative anemia results from the inability of bone marrow to produce adequate numbers of red blood cells. The list of conditions that cause hypoproliferative anemia is long, starting from common etiologies as iron deficiency to rarer diagnoses of constitutional bone marrow failure syndromes. There is no perfect diagnostic algorithm, and clinical data may not always clearly distinguish “normal” from “abnormal”, yet it is important for practicing clinicians to recognize each condition so that treatment can be initiated promptly. This review describes diagnostic approaches to hypoproliferative anemia, with particular emphasis on bone marrow failure syndromes. PMID:26404444

  18. [Hepatic amyloidosis as cause of severe intrahepatic cholestasis].

    PubMed

    Gavilán, J C; Bermúdez, F J; Márquez, A; Sánchez-Carrillo, J J; González-Santos, P

    2003-01-01

    The liver is frequently involved by amyloidosis, but hyperbilirubinemia and liver failure are uncommon features. A mild elevation of the serum alkaline phosphatase value and, less frequently, hepatomegaly are the most common findings. Usually the patients have no symptoms related with the liver involvement; the clinical manifestation and the long term prognosis depends on the renal and cardiac disease. We report an unusual clinical presentation of primary amyloidosis in a previously asymptomatic 65 years old woman who was admitted to the hospital because of ictericia and ascitis mimicking a drug induced acute hepatic failure.

  19. Development of Safety Analysis Code System of Beam Transport and Core for Accelerator Driven System

    NASA Astrophysics Data System (ADS)

    Aizawa, Naoto; Iwasaki, Tomohiko

    2014-06-01

    Safety analysis code system of beam transport and core for accelerator driven system (ADS) is developed for the analyses of beam transients such as the change of the shape and position of incident beam. The code system consists of the beam transport analysis part and the core analysis part. TRACE 3-D is employed in the beam transport analysis part, and the shape and incident position of beam at the target are calculated. In the core analysis part, the neutronics, thermo-hydraulics and cladding failure analyses are performed by the use of ADS dynamic calculation code ADSE on the basis of the external source database calculated by PHITS and the cross section database calculated by SRAC, and the programs of the cladding failure analysis for thermoelastic and creep. By the use of the code system, beam transient analyses are performed for the ADS proposed by Japan Atomic Energy Agency. As a result, the rapid increase of the cladding temperature happens and the plastic deformation is caused in several seconds. In addition, the cladding is evaluated to be failed by creep within a hundred seconds. These results have shown that the beam transients have caused a cladding failure.

  20. Helios High Altitude Long Endurance Mission Mishap

    NASA Technical Reports Server (NTRS)

    Henwood, Barton E.

    2009-01-01

    This slide presentation reviews the failure of the Helios solar aircraft failure. Included are pictures of the aircraft, inflight, and after the mishap, analysis of the root causes of the mishap, contributing factors, recommendations and lessons learned in respect to crew training, and assessing the level of risk.

  1. A Study of Failure Events in Drinking Water Systems As a Basis for Comparison and Evaluation of the Efficacy of Potable Reuse Schemes

    PubMed Central

    Onyango, Laura A.; Quinn, Chloe; Tng, Keng H.; Wood, James G.; Leslie, Greg

    2015-01-01

    Potable reuse is implemented in several countries around the world to augment strained water supplies. This article presents a public health perspective on potable reuse by comparing the critical infrastructure and institutional capacity characteristics of two well-established potable reuse schemes with conventional drinking water schemes in developed nations that have experienced waterborne outbreaks. Analysis of failure events in conventional water systems between 2003 and 2013 showed that despite advances in water treatment technologies, drinking water outbreaks caused by microbial contamination were still frequent in developed countries and can be attributed to failures in infrastructure or institutional practices. Numerous institutional failures linked to ineffective treatment protocols, poor operational practices, and negligence were detected. In contrast, potable reuse schemes that use multiple barriers, online instrumentation, and operational measures were found to address the events that have resulted in waterborne outbreaks in conventional systems in the past decade. Syndromic surveillance has emerged as a tool in outbreak detection and was useful in detecting some outbreaks; increases in emergency department visits and GP consultations being the most common data source, suggesting potential for an increasing role in public health surveillance of waterborne outbreaks. These results highlight desirable characteristics of potable reuse schemes from a public health perspective with potential for guiding policy on surveillance activities. PMID:27053920

  2. A Study of Failure Events in Drinking Water Systems As a Basis for Comparison and Evaluation of the Efficacy of Potable Reuse Schemes.

    PubMed

    Onyango, Laura A; Quinn, Chloe; Tng, Keng H; Wood, James G; Leslie, Greg

    2015-01-01

    Potable reuse is implemented in several countries around the world to augment strained water supplies. This article presents a public health perspective on potable reuse by comparing the critical infrastructure and institutional capacity characteristics of two well-established potable reuse schemes with conventional drinking water schemes in developed nations that have experienced waterborne outbreaks. Analysis of failure events in conventional water systems between 2003 and 2013 showed that despite advances in water treatment technologies, drinking water outbreaks caused by microbial contamination were still frequent in developed countries and can be attributed to failures in infrastructure or institutional practices. Numerous institutional failures linked to ineffective treatment protocols, poor operational practices, and negligence were detected. In contrast, potable reuse schemes that use multiple barriers, online instrumentation, and operational measures were found to address the events that have resulted in waterborne outbreaks in conventional systems in the past decade. Syndromic surveillance has emerged as a tool in outbreak detection and was useful in detecting some outbreaks; increases in emergency department visits and GP consultations being the most common data source, suggesting potential for an increasing role in public health surveillance of waterborne outbreaks. These results highlight desirable characteristics of potable reuse schemes from a public health perspective with potential for guiding policy on surveillance activities.

  3. Diagnoses of Early and Late Readmissions after Hospitalization for Pneumonia. A Systematic Review

    PubMed Central

    Sjoding, Michael W.; Iwashyna, Theodore J.

    2014-01-01

    Rationale: Pneumonia is a frequent cause of hospitalization, yet drivers of post-pneumonia morbidity remain poorly characterized. Causes of hospital readmissions may elucidate important sources of morbidity and are of particular interest given the U.S. Hospital Readmission Reductions Program. Objectives: To review the primary diagnoses of early (≤30 d) and late (≥31 d) readmissions after pneumonia hospitalization. Methods: Systematic review of MEDLINE, Embase, and CINAHL databases. We identified original research studies of adults aged 18 years or older, hospitalized for pneumonia, and for whom cause-specific readmission rates were reported. Two authors abstracted study results and assessed study quality. Measurements and Main Results: Of the 1,243 citations identified, 12 met eligibility criteria. Included studies were conducted in the United States, Spain, Canada, Croatia, and Sweden. All-cause 30-day readmission rates ranged from 16.8 to 20.1% across administrative studies; the weighted average for the studies using chart review was 11.6% (15.6% in United States–based studies). Pneumonia, heart failure/cardiovascular causes, and chronic obstructive pulmonary disease/pulmonary causes are the most common reasons for early readmission after pneumonia hospitalization. Although it was the single most common cause for readmission, pneumonia accounted for only 17.9 to 29.4% of all 30-day readmissions in administrative studies and a weighted average of 23.0% in chart review studies. After accounting for study population, there was no clear difference in findings between claims-based versus chart-review studies. Few studies assessed readmissions beyond 30 days, although the limited available data suggest similar primary diagnoses for early and late readmissions. No studies assessed whether reasons for readmission were similar to patients’ reasons for healthcare use before hospitalization. Conclusions: Pneumonia, heart failure/cardiovascular disease, and chronic obstructive pulmonary disease/pulmonary disease are the most common readmission diagnoses after pneumonia hospitalization. Although pneumonia was the most common readmission diagnosis, it accounted for only a minority of all readmissions. Late readmission diagnoses are less thoroughly described, and further research is needed to understand how hospitalization for pneumonia fits within the broader context of patients’ health trajectory. PMID:25079245

  4. Partial Discharge Monitoring in Power Transformers Using Low-Cost Piezoelectric Sensors

    PubMed Central

    Castro, Bruno; Clerice, Guilherme; Ramos, Caio; Andreoli, André; Baptista, Fabricio; Campos, Fernando; Ulson, José

    2016-01-01

    Power transformers are crucial in an electric power system. Failures in transformers can affect the quality and cause interruptions in the power supply. Partial discharges are a phenomenon that can cause failures in the transformers if not properly monitored. Typically, the monitoring requires high-cost corrective maintenance or even interruptions of the power system. Therefore, the development of online non-invasive monitoring systems to detect partial discharges in power transformers has great relevance since it can reduce significant maintenance costs. Although commercial acoustic emission sensors have been used to monitor partial discharges in power transformers, they still represent a significant cost. In order to overcome this drawback, this paper presents a study of the feasibility of low-cost piezoelectric sensors to identify partial discharges in mineral insulating oil of power transformers. The analysis of the feasibility of the proposed low-cost sensor is performed by its comparison with a commercial acoustic emission sensor commonly used to detect partial discharges. The comparison between the responses in the time and frequency domain of both sensors was carried out and the experimental results indicate that the proposed piezoelectric sensors have great potential in the detection of acoustic waves generated by partial discharges in insulation oil, contributing for the popularization of this noninvasive technique. PMID:27517931

  5. Partial Discharge Monitoring in Power Transformers Using Low-Cost Piezoelectric Sensors.

    PubMed

    Castro, Bruno; Clerice, Guilherme; Ramos, Caio; Andreoli, André; Baptista, Fabricio; Campos, Fernando; Ulson, José

    2016-08-10

    Power transformers are crucial in an electric power system. Failures in transformers can affect the quality and cause interruptions in the power supply. Partial discharges are a phenomenon that can cause failures in the transformers if not properly monitored. Typically, the monitoring requires high-cost corrective maintenance or even interruptions of the power system. Therefore, the development of online non-invasive monitoring systems to detect partial discharges in power transformers has great relevance since it can reduce significant maintenance costs. Although commercial acoustic emission sensors have been used to monitor partial discharges in power transformers, they still represent a significant cost. In order to overcome this drawback, this paper presents a study of the feasibility of low-cost piezoelectric sensors to identify partial discharges in mineral insulating oil of power transformers. The analysis of the feasibility of the proposed low-cost sensor is performed by its comparison with a commercial acoustic emission sensor commonly used to detect partial discharges. The comparison between the responses in the time and frequency domain of both sensors was carried out and the experimental results indicate that the proposed piezoelectric sensors have great potential in the detection of acoustic waves generated by partial discharges in insulation oil, contributing for the popularization of this noninvasive technique.

  6. Rationale and design of the IMPACT EU-trial: improve management of heart failure with procalcitonin biomarkers in cardiology (BIC)-18.

    PubMed

    Möckel, Martin; Slagman, Anna; Vollert, Jörn Ole; Ebmeyer, Stefan; Wiemer, Jan C; Searle, Julia; Giannitsis, Evangelos; Kellum, John A; Maisel, Alan

    2018-02-01

    To evaluate the effectiveness of procalcitonin (PCT)-guided antibiotic treatment compared to current treatment practice to reduce 90-day all-cause mortality in emergency patients with shortness of breath (SOB) and suspected acute heart failure (AHF). Concomitant AHF and lower respiratory tract (or other bacterial) infection in emergency patients with dyspnea are common and can be difficult to diagnose. Early and adequate initiation of antibiotic therapy (ABX) significantly improves patient outcome, but superfluous prescription of ABX maybe harmful. In a multicentre, prospective, randomized, controlled process trial with an open intervention, adult emergency patients with SOB and increased levels of natriuretic peptides will be randomized to either a standard care group or a PCT-guided group with respect to the initiation of antibiotic treatment. In the PCT-guided group, the initiation of antibiotic therapy is based on the results of acute PCT measurements at admission, using a cut-off of 0.2 ng/ml. A two-stage sample-size adaptive design is used; an interim analysis was done after completion of 50% of patients and the final sample size remained unchanged. Primary endpoint is 90-day all-cause mortality. The current study will provide evidence, whether the routine use of PCT in patients with suspected AHF improves outcome.

  7. Incidence, causes and consequences of pregnancy failure in viviparous lizards: implications for research and conservation settings.

    PubMed

    Hare, Kelly M; Cree, Alison

    2010-01-01

    Research on the causes of pregnancy failure in vertebrates has historically been mammal-focussed. However, live-birth (viviparity) has evolved multiple times, and is present in all other vertebrate taxa except Aves and Agnatha. Viviparous lizards (O. Squamata, excluding snakes and amphisbaenians) provide a valuable experimental group when studying major evolutionary events and some are also species of high conservation value. Consequently, both researchers and herpetoculturists often require high reproductive output from captive-held lizards. We reviewed the literature to determine potential or known causes of pregnancy failure for captive lizards. Pregnancy success across species averages approximately 86%, but varies extensively and does not appear to be related to embryonic stage when brought into captivity or level of placentation. Causes of pregnancy failure also vary among species, but correct thermal environments are vital to success, and providing adequate nutrition before vitellogenesis increases the number of viable offspring. A coordinated sequence of hormonal changes involving both pro-pregnancy and pro-labour factors is important for successful pregnancies, although uncertainty remains around the maternal concentrations of corticosterone that allow successful development. Several research areas commonly studied in mammals have yet to be explored or fully addressed in pregnant lizards, including impacts of toxins, parasites, UV light and nutritional quality. As viviparity has evolved over 100 times in lizards, and many different levels of placentation exist, pregnant lizards provide valuable models for studies in ecology and evolution and offer a useful comparison for studies on other viviparous vertebrates.

  8. SRM Internal Flow Tests and Computational Fluid Dynamic Analysis. Volume 3; Titan, ASRM, and Subscale Motor Analyses

    NASA Technical Reports Server (NTRS)

    1995-01-01

    A computational fluid dynamics (CFD) analysis has been performed on the aft slot region of the Titan 4 Solid Rocket Motor Upgrade (SRMU). This analysis was performed in conjunction with MSFC structural modeling of the propellant grain to determine if the flow field induced stresses would adversely alter the propellant geometry to the extent of causing motor failure. The results of the coupled CFD/stress analysis have shown that there is a continual increase of flow field resistance at the aft slot due to the aft segment propellant grain being progressively moved radially toward the centerline of the motor port. This 'bootstrapping' effect between grain radial movement and internal flow resistance is conducive to causing a rapid motor failure.

  9. Inter-hemispheric wave propagation failures in traumatic brain injury are indicative of callosal damage.

    PubMed

    Spiegel, Daniel P; Laguë-Beauvais, Maude; Sharma, Gaurav; Farivar, Reza

    2015-04-01

    Approximately 3.2-5.3 million Americans live with the consequences of a traumatic brain injury (TBI), making TBI one of the most common causes of disability in the world. Visual deficits often accompany TBI but physiological and anatomical evidence for injury in mild TBI is lacking. Axons traversing the corpus callosum are particularly vulnerable to TBI. Hemifield representations of early visual areas are linked by bundles of fibers that together cross the corpus callosum while maintaining their topographic relations. Given the increased vulnerability of the long visual axons traversing the corpus callosum, we hypothesized that inter-hemispheric transmission for vision will be impaired following mild TBI. Using the travelling wave paradigm (Wilson, Blake, & Lee 2001), we measured inter-hemispheric transmission in terms of both speed and propagation failures in 14 mild TBI patients and 14 age-matched controls. We found that relative to intra-hemispheric waves, inter-hemispheric waves were faster and that the inter-hemispheric propagation failures were more common in TBI patients. Furthermore, the transmission failures were topographically distributed, with a bias towards greater failures for transmission across the upper visual field. We discuss the results in terms of increased local inhibition and topographically-selective axonal injury in mild TBI. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. International Space Station Powered Bolt Nut Anomaly and Failure Analysis Summary

    NASA Technical Reports Server (NTRS)

    Sievers, Daniel E.; Warden, Harry K.

    2010-01-01

    A key mechanism used in the on-orbit assembly of the International Space Station (ISS) pressurized elements is the Common Berthing Mechanism. The mechanism that effects the structural connection of the Common Berthing Mechanism halves is the Powered Bolt Assembly. There are sixteen Powered Bolt Assemblies per Common Berthing Mechanism. The Common Berthing Mechanism has a bolt which engages a self aligning Powered Bolt Nut (PBN) on the mating interface (Figure 1). The Powered Bolt Assemblies are preloaded to approximately 84.5 kN (19000 lb) prior to pressurization of the CBM. The PBNs mentioned below, manufactured in 2009, will be used on ISS future missions. An on orbit functional failure of this hardware would be unacceptable and in some instances catastrophic due to the failure of modules to mate and seal the atmosphere, risking loss of crew and ISS functions. The manufacturing processes that create the PBNs need to be strictly controlled. Functional (torque vs. tension) acceptance test failures will be the result of processes not being strictly followed. Without the proper knowledge of thread tolerances, fabrication techniques, and dry film lubricant application processes, PBNs will be, and have been manufactured improperly. The knowledge gained from acceptance test failures and the resolution of those failures, thread fabrication techniques and thread dry film lubrication processes can be applied to many aerospace mechanisms to enhance their performance. Test data and manufactured PBN thread geometry will be discussed for both failed and successfully accepted PBNs.

  11. Four faces of baroreflex failure: hypertensive crisis, volatile hypertension, orthostatic tachycardia, and malignant vagotonia

    NASA Technical Reports Server (NTRS)

    Ketch, Terry; Biaggioni, Italo; Robertson, RoseMarie; Robertson, David

    2002-01-01

    BACKGROUND: The baroreflex normally serves to buffer blood pressure against excessive rise or fall. Baroreflex failure occurs when afferent baroreceptive nerves or their central connections become impaired. In baroreflex failure, there is loss of buffering ability, and wide excursions of pressure and heart rate occur. Such excursions may derive from endogenous factors such as stress or drowsiness, which result in quite high and quite low pressures, respectively. They may also derive from exogenous factors such as drugs or environmental influences. METHODS AND RESULTS: Impairment of the baroreflex may produce an unusually broad spectrum of clinical presentations; with acute baroreflex failure, a hypertensive crisis is the most common presentation. Over succeeding days to weeks, or in the absence of an acute event, volatile hypertension with periods of hypotension occurs and may continue for many years, usually with some attenuation of pressor surges and greater prominence of depressor valleys during long-term follow-up. With incomplete loss of baroreflex afferents, a mild syndrome of orthostatic tachycardia or orthostatic intolerance may appear. Finally, if the baroreflex failure occurs without concomitant destruction of the parasympathetic efferent vagal fibers, a resting state may lead to malignant vagotonia with severe bradycardia and hypotension and episodes of sinus arrest. CONCLUSIONS: Although baroreflex failure is not the most common cause of the above conditions, correct differentiation from other cardiovascular disorders is important, because therapy of baroreflex failure requires specific strategies, which may lead to successful control.

  12. Health economic evaluation of patients treated for nosocomial pneumonia caused by methicillin-resistant Staphylococcus aureus: secondary analysis of a multicenter randomized clinical trial of vancomycin and linezolid.

    PubMed

    Niederman, Michael S; Chastre, Jean; Solem, Caitlyn T; Wan, Yin; Gao, Xin; Myers, Daniela E; Haider, Seema; Li, Jim Z; Stephens, Jennifer M

    2014-09-01

    Results from studies comparing health care resource use (HCRU), costs of treatment, and cost-effectiveness of linezolid compared with vancomycin therapy in the treatment of hospitalized patients with methicillin-resistant Staphylococcus aureus (MRSA) nosocomial pneumonia are limited in the published literature. We therefore conducted an analysis to compare the HCRU, costs of treatment, and cost-effectiveness of linezolid compared with vancomycin in the treatment of hospitalized patients with MRSA nosocomial pneumonia using data from a Phase IV clinical trial. The economic effect of moderate to severe adverse events (MSAEs) and the development of renal failure were also evaluated. We performed a post hoc analysis of data from a Phase IV, double-blind, randomized, comparator-controlled, multicenter trial that compared linezolid and vancomycin treatment in patients with MRSA nosocomial pneumonia. HCRU and costs were compared based on treatment, development of MSAEs, and development of renal failure using data from the modified intent-to-treat population. Predictors of costs were evaluated using generalized linear models. A piggyback cost-effectiveness analysis was conducted to assess the incremental cost-effectiveness ratio of linezolid versus vancomycin, given the significantly higher clinical success of linezolid compared with vancomycin found in the trial. Overall, HCRU and costs were similar between the linezolid and vancomycin treatment groups; drug costs were significantly higher and dialysis costs significantly lower for linezolid- compared with vancomycin-treated patients. Total treatment costs were approximately $8000 higher (P = .046) for patients who developed renal failure compared with those who did not. Renal failure occurred more commonly in patients randomized to receive vancomycin (15%) compared with linezolid (4%; P < .001). Region, ventilator-associated pneumonia, clinical failure, and development of renal failure were associated with significantly higher total costs. The point estimate incremental cost-effectiveness ratio for linezolid compared with vancomycin was $16,516 per treatment success, with linezolid dominant in 24% and dominated in <2% of bootstrapped samples. This phase 4 clinical trial conducted in patients with MRSA-confirmed nosocomial pneumonia reveals that linezolid- compared with vancomycin-treated patients had similar HCRU and total overall costs. Fewer patients developed renal failure during the study while taking linezolid compared with vancomycin, and patients with a documented MSAE or renal failure had increased HCRU and costs. In summary, linezolid may be a cost-effective treatment strategy in MRSA-confirmed nosocomial pneumonia. Copyright © 2014 Elsevier HS Journals, Inc. All rights reserved.

  13. [Retrieval and failure analysis of surgical implants in Brazil: the need for proper regulation].

    PubMed

    Azevedo, Cesar R de Farias; Hippert, Eduardo

    2002-01-01

    This paper summarizes several cases of metallurgical failure analysis of surgical implants conducted at the Laboratory of Failure Analysis, Instituto de Pesquisas Tecnológicas (IPT), in Brazil. Failures with two stainless steel femoral compression plates, one stainless steel femoral nail plate, one Ti-6Al-4V alloy maxillary reconstruction plate, and five Nitinol wires were investigated. The results showed that the implants were not in accordance with ISO standards and presented evidence of corrosion-assisted fracture. Furthermore, some of the implants presented manufacturing/processing defects which also contributed to their premature failure. Implantation of materials that are not biocompatible may cause several types of adverse effects in the human body and lead to premature implant failure. A review of prevailing health legislation is needed in Brazil, along with the adoption of regulatory mechanisms to assure the quality of surgical implants on the market, providing for compulsory procedures in the reporting and investigation of surgical implants which have failed in service.

  14. Failure analysis of storage tank component in LNG regasification unit using fault tree analysis method (FTA)

    NASA Astrophysics Data System (ADS)

    Mulyana, Cukup; Muhammad, Fajar; Saad, Aswad H.; Mariah, Riveli, Nowo

    2017-03-01

    Storage tank component is the most critical component in LNG regasification terminal. It has the risk of failure and accident which impacts to human health and environment. Risk assessment is conducted to detect and reduce the risk of failure in storage tank. The aim of this research is determining and calculating the probability of failure in regasification unit of LNG. In this case, the failure is caused by Boiling Liquid Expanding Vapor Explosion (BLEVE) and jet fire in LNG storage tank component. The failure probability can be determined by using Fault Tree Analysis (FTA). Besides that, the impact of heat radiation which is generated is calculated. Fault tree for BLEVE and jet fire on storage tank component has been determined and obtained with the value of failure probability for BLEVE of 5.63 × 10-19 and for jet fire of 9.57 × 10-3. The value of failure probability for jet fire is high enough and need to be reduced by customizing PID scheme of regasification LNG unit in pipeline number 1312 and unit 1. The value of failure probability after customization has been obtained of 4.22 × 10-6.

  15. Antimicrobial treatment failures in patients with community-acquired pneumonia: causes and prognostic implications.

    PubMed

    Arancibia, F; Ewig, S; Martinez, J A; Ruiz, M; Bauer, T; Marcos, M A; Mensa, J; Torres, A

    2000-07-01

    The aim of the study was to determine the causes and prognostic implications of antimicrobial treatment failures in patients with nonresponding and progressive life-threatening, community-acquired pneumonia. Forty-nine patients hospitalized with a presumptive diagnosis of community-acquired pneumonia during a 16-mo period, failure to respond to antimicrobial treatment, and documented repeated microbial investigation >/= 72 h after initiation of in-hospital antimicrobial treatment were recorded. A definite etiology of treatment failure could be established in 32 of 49 (65%) patients, and nine additional patients (18%) had a probable etiology. Treatment failures were mainly infectious in origin and included primary, persistent, and nosocomial infections (n = 10 [19%], 13 [24%], and 11 [20%] of causes, respectively). Definite but not probable persistent infections were mostly due to microbial resistance to the administered initial empiric antimicrobial treatment. Nosocomial infections were particularly frequent in patients with progressive pneumonia. Definite persistent infections and nosocomial infections had the highest associated mortality rates (75 and 88%, respectively). Nosocomial pneumonia was the only cause of treatment failure independently associated with death in multivariate analysis (RR, 16.7; 95% CI, 1.4 to 194.9; p = 0.03). We conclude that the detection of microbial resistance and the diagnosis of nosocomial pneumonia are the two major challenges in hospitalized patients with community-acquired pneumonia who do not respond to initial antimicrobial treatment. In order to establish these potentially life-threatening etiologies, a regular microbial reinvestigation seems mandatory for all patients presenting with antimicrobial treatment failures.

  16. Late leaflet fracture and embolization of a Duromedics mitral prosthesis.

    PubMed

    Sudo, K; Sasagawa, N; Ide, H; Nunokawa, M; Fujiki, T; Tonari, K

    2000-08-01

    A case of leaflet fracture and embolization of a mitral prosthetic valve is described. A 54-year-old man had received mitral valve replacement with an Edwards-Duromedics 29M prosthetic valve, at 10 years ago. Emergency mitral valve replacement was performed because the patient had severe congestive left heart failure with severe acute mitral regurgitation caused by a fracture in one of the mitral valve leaflets. The leaflet, which was fractured into 2 pieces, was removed from the right common iliac artery at 3 months after valve replacement. Visual inspection revealed that the leaflet contained a midline fracture. The fracture originated within a cavitary erosion pit near the major radius of the leaflet. The patient recovered from acute renal failure, requiring hemodialysis for 80 days, and is currently without complaints. We have used a Duromedics mitral valve in 11 patients, from April 1987 to April 1988. No subsequent valve failure has occurred. The diagnosis, treatment and cause of a mechanical valve fracture are discussed.

  17. All-inkjet-printed thin-film transistors: manufacturing process reliability by root cause analysis.

    PubMed

    Sowade, Enrico; Ramon, Eloi; Mitra, Kalyan Yoti; Martínez-Domingo, Carme; Pedró, Marta; Pallarès, Jofre; Loffredo, Fausta; Villani, Fulvia; Gomes, Henrique L; Terés, Lluís; Baumann, Reinhard R

    2016-09-21

    We report on the detailed electrical investigation of all-inkjet-printed thin-film transistor (TFT) arrays focusing on TFT failures and their origins. The TFT arrays were manufactured on flexible polymer substrates in ambient condition without the need for cleanroom environment or inert atmosphere and at a maximum temperature of 150 °C. Alternative manufacturing processes for electronic devices such as inkjet printing suffer from lower accuracy compared to traditional microelectronic manufacturing methods. Furthermore, usually printing methods do not allow the manufacturing of electronic devices with high yield (high number of functional devices). In general, the manufacturing yield is much lower compared to the established conventional manufacturing methods based on lithography. Thus, the focus of this contribution is set on a comprehensive analysis of defective TFTs printed by inkjet technology. Based on root cause analysis, we present the defects by developing failure categories and discuss the reasons for the defects. This procedure identifies failure origins and allows the optimization of the manufacturing resulting finally to a yield improvement.

  18. Accuracy in inference of nursing diagnoses in heart failure patients.

    PubMed

    Pereira, Juliana de Melo Vellozo; Cavalcanti, Ana Carla Dantas; Lopes, Marcos Venícios de Oliveira; da Silva, Valéria Gonçalves; de Souza, Rosana Oliveira; Gonçalves, Ludmila Cuzatis

    2015-01-01

    Heart failure (HF) is a common cause of hospitalization and requires accuracy in clinical judgment and appropriate nursing diagnoses. to determine the accuracy of nursing diagnoses of fatigue, intolerance to activity and decreased cardiac output in hospitalized HF patients. descriptive study applied to nurses with experience in NANDA-I and/or HF nursing diagnoses. Evaluation and accuracy were determined by calculating efficacy (E), false negative (FN), false positive (FP) and trend (T) measures. Nurses who showed acceptable inspection for two diagnoses were selected. the nursing diagnosis of fatigue was the most commonly mistaken diagnosis identified by the nursing evaluators. the search for improving diagnostic accuracy reaffirms the need for continuous and specific training to improve the diagnosis capability of nurses. the training allowed the exercise of clinical judgment and better accuracy of nurses.

  19. De novo noncutaneous malignancies after kidney transplantation are associated with an increased risk of graft failure: results from a time-dependent analysis on 672 patients.

    PubMed

    Cena, Tiziana; Musetti, Claudio; Quaglia, Marco; Magnani, Corrado; Stratta, Piero; Bagnardi, Vincenzo; Cantaluppi, Vincenzo

    2016-10-01

    The aim of this study was to evaluate the association between cancer occurrence and risk of graft failure in kidney transplant recipients. From November 1998 to November 2013, 672 adult patients received their first kidney transplant from a deceased donor and had a minimum follow-up of 6 months. During a median follow-up of 4.7 years (3523 patient-years), 47 patients developed a nonmelanoma skin cancer (NMSC) and 40 a noncutaneous malignancy (NCM). A total of 59 graft failures were observed. The failure rate was 6 per 100 patient-year (pt-yr) after NCM versus 1.5 per 100 pt-yr in patients without NCM. In a time-dependent multivariable model, the occurrence of NCM appeared to be associated with failure (HR = 3.27; 95% CI = 1.44-7.44). The effect of NCM on the cause-specific graft failure was different (P = 0.002) when considering events due to chronic rejection (HR = 0.55) versus other causes (HR = 15.59). The reduction of the immunosuppression after NCM was not associated with a greater risk of graft failure. In conclusion, our data suggest that post-transplant NCM may be a strong risk factor for graft failure, particularly for causes other than chronic rejection. © 2016 Steunstichting ESOT.

  20. Postflight analysis of the single-axis acoustic system on SPAR VI and recommendations for future flights

    NASA Technical Reports Server (NTRS)

    Naumann, R. J.; Oran, W. A.; Whymark, R. R.; Rey, C.

    1981-01-01

    The single axis acoustic levitator that was flown on SPAR VI malfunctioned. The results of a series of tests, analyses, and investigation of hypotheses that were undertaken to determine the probable cause of failure are presented, together with recommendations for future flights of the apparatus. The most probable causes of the SPAR VI failure were lower than expected sound intensity due to mechanical degradation of the sound source, and an unexpected external force that caused the experiment sample to move radially and eventually be lost from the acoustic energy well.

  1. Common Orbital Infections ~ State of the Art ~ Part I

    PubMed Central

    Hamed-Azzam, Shirin; AlHashash, Islam; Briscoe, Daniel; Rose, Geoffrey E; Verity, David H.

    2018-01-01

    Infections of the orbit and periorbita are relatively frequent, and can cause significant local and systemic morbidity. Loss of vision occurs in more than 10% of patients, and systemic sequelae can include meningitis, intracranial abscess, and death. Numerous organisms infect the orbit, but the most common are bacteria. There are many methods through which orbital infections occur, with infection from the neighboring ethmoid sinuses the most likely cause for all age groups. Prompt management is essential in suspected orbital cellulitis, and involves urgent intravenous antibiotics, rehydration, and treatment of any co-existent underlying systemic disease, e.g., diabetes, renal failure. This review summarizes the common infectious processes of the orbit in both pediatric and adult groups. We review pathophysiology, symptoms, signs, and treatment for infectious orbital processes. PMID:29719647

  2. Reliability Centred Maintenance (RCM) Analysis of Laser Machine in Filling Lithos at PT X

    NASA Astrophysics Data System (ADS)

    Suryono, M. A. E.; Rosyidi, C. N.

    2018-03-01

    PT. X used automated machines which work for sixteen hours per day. Therefore, the machines should be maintained to keep the availability of the machines. The aim of this research is to determine maintenance tasks according to the cause of component’s failure using Reliability Centred Maintenance (RCM) and determine the amount of optimal inspection frequency which must be performed to the machine at filling lithos process. In this research, RCM is used as an analysis tool to determine the critical component and find optimal inspection frequencies to maximize machine’s reliability. From the analysis, we found that the critical machine in filling lithos process is laser machine in Line 2. Then we proceed to determine the cause of machine’s failure. Lastube component has the highest Risk Priority Number (RPN) among other components such as power supply, lens, chiller, laser siren, encoder, conveyor, and mirror galvo. Most of the components have operational consequences and the others have hidden failure consequences and safety consequences. Time-directed life-renewal task, failure finding task, and servicing task can be used to overcome these consequences. The results of data analysis show that the inspection must be performed once a month for laser machine in the form of preventive maintenance to lowering the downtime.

  3. A cohort study of Chlamydia trachomatis treatment failure in women: a study protocol

    PubMed Central

    2013-01-01

    Background Chlamydia trachomatis is the most commonly diagnosed bacterial sexually transmitted infection in the developed world and diagnosis rates have increased dramatically over the last decade. Repeat infections of chlamydia are very common and may represent re-infection from an untreated partner or treatment failure. The aim of this cohort study is to estimate the proportion of women infected with chlamydia who experience treatment failure after treatment with 1 gram azithromycin. Methods/design This cohort study will follow women diagnosed with chlamydia for up to 56 days post treatment. Women will provide weekly genital specimens for further assay. The primary outcome is the proportion of women who are classified as having treatment failure 28, 42 or 56 days after recruitment. Comprehensive sexual behavior data collection and the detection of Y chromosome DNA and high discriminatory chlamydial genotyping will be used to differentiate between chlamydia re-infection and treatment failure. Azithromycin levels in high-vaginal specimens will be measured using a validated liquid chromatography – tandem mass spectrometry method to assess whether poor azithromycin absorption could be a cause of treatment failure. Chlamydia culture and minimal inhibitory concentrations will be performed to further characterize the chlamydia infections. Discussion Distinguishing between treatment failure and re-infection is important in order to refine treatment recommendations and focus infection control mechanisms. If a large proportion of repeat chlamydia infections are due to antibiotic treatment failure, then international recommendations on chlamydia treatment may need to be re-evaluated. If most are re-infections, then strategies to expedite partner treatment are necessary. PMID:23957327

  4. Does natriuretic peptide monitoring improve outcomes in heart failure patients? A systematic review and meta-analysis.

    PubMed

    Khan, Muhammad Shahzeb; Siddiqi, Tariq Jamal; Usman, Muhammad Shariq; Sreenivasan, Jayakumar; Fugar, Setri; Riaz, Haris; Murad, M H; Mookadam, Farouk; Figueredo, Vincent M

    2018-07-15

    Current guidelines do not support the use of serial natriuretic peptide (NP) monitoring for heart failure with preserved (HFpEF) or reduced ejection fraction (HFrEF) treatment, despite some studies showing benefit. We conducted an updated meta-analysis to address whether medical therapy in HFpEF or HFrEF should be titrated according to NP levels. MEDLINE, Scopus and Cochrane CENTRAL databases were searched for randomized controlled trials (RCTs) comparing NP versus guideline directed titration in HF patients through December 2017. The key outcomes of interest were mortality, HF hospitalizations and all-cause hospitalizations. Risk ratios and 95% confidence intervals were pooled using random effects model. Sub-group analyses were performed for type of NP used, average age and acute or chronic HF. Eighteen trials including 5116 patients were included. Meta-analysis showed no significant difference between the NP-guided arm versus guideline directed titration in all-cause mortality (RR = 0.91 [0.81, 1.03]; p = 0.13), HF hospitalizations (RR = 0.81 [0.65, 1.01]; p = 0.06), and all cause hospitalizations (RR = 0.93 [0.86, 1.01]; p = 0.09). The results were consistent upon subgroup analysis by biomarker type (NT-proBNP or BNP) and type of heart failure (acute or chronic and HFrEF or HFpEF). Sub-group analysis suggested that NP-guided treatment was associated with decreased all-cause hospitalizations in patients younger than 72 years of age. The available evidence suggests that NP-guided therapy provides no additional benefit over guideline directed therapy in terms of all-cause mortality and HF-related hospitalizations in acute or chronic HF patients, regardless of their ejection fraction. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. Clinical profile and improving mortality trend of scrub typhus in South India.

    PubMed

    Varghese, George M; Trowbridge, Paul; Janardhanan, Jeshina; Thomas, Kurien; Peter, John V; Mathews, Prasad; Abraham, Ooriapadickal C; Kavitha, M L

    2014-06-01

    Scrub typhus, a bacterial zoonosis caused by Orientia tsutsugamushi, may cause multiorgan dysfunction syndrome (MODS) and is associated with significant mortality. This study was undertaken to document the clinical and laboratory manifestations and complications and to study time trends and factors associated with mortality in patients with scrub typhus infection. This retrospective study, done at a university teaching hospital, included 623 patients admitted between 2005 and 2010 with scrub typhus. The diagnosis was established by a positive IgM ELISA and/or pathognomonic eschar with PCR confirmation where feasible. The clinical and laboratory profile, course in hospital, and outcome were documented. Factors associated with mortality were analyzed using multivariate logistic regression analysis. The most common presenting symptoms were fever (100%), nausea/vomiting (54%), shortness of breath (49%), headache (46%), cough (38%), and altered sensorium (26%). An eschar was present in 43.5% of patients. Common laboratory findings included elevated transaminases (87%), thrombocytopenia (79%), and leukocytosis (46%). MODS was seen in 34% of patients. The overall case-fatality rate was 9.0%. Features of acute lung injury were observed in 33.7%, and 29.5% required ventilatory support. On multivariate analysis, shock requiring vasoactive agents (relative risk (RR) 10.5, 95% confidence interval (CI) 4.2-25.7, p<0.001), central nervous system (CNS) dysfunction (RR 5.1, 95% CI 2.4-10.7, p<0.001), and renal failure (RR 3.6, 95% CI 1.7-7.5, p=0.001) were independent predictors of mortality. Over 4 years, a decreasing trend was observed in the mortality rate. Scrub typhus can manifest with potentially life-threatening complications such as lung injury, shock, and meningoencephalitis. MODS occurred in a third of our patients. The overall case-fatality rate was 9%, with shock, renal failure, and CNS associated with a higher mortality. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  6. Electrical treatment of atrial arrhythmias in heart failure patients implanted with a dual defibrillator CRT device. Results from the TRADE-HF study.

    PubMed

    Botto, Giovanni Luca; Padeletti, Luigi; Covino, Gregorio; Pieragnoli, Paolo; Liccardo, Mattia; Mariconti, Barbara; Favale, Stefano; Molon, Giulio; De Filippo, Paolo; Bolognese, Leonardo; Landolina, Maurizio; Raciti, Giovanni; Boriani, Giuseppe

    2017-06-01

    Ventricular and atrial arrhythmias commonly occur in heart failure patients and are a significant source of symptoms, morbidity and mortality. Some specific generators referred to as dual defibrillators, Dual CRT-Ds, have the ability to treat atrial and ventricular arrhythmias. TRADE-HF is a prospective two-arm randomized study aimed at assessing the benefits of complete automatic management of atrial arrhythmias in patients implanted with a dual CRT-D. Primary objective of the TRADE-HF study was to document reduction of unplanned hospital admission for cardiac reasons or death for cardiovascular causes or progression to permanent AF, by comparing fully-automatic device driven therapy for atrial tachycardia or fibrillation (AT/AF) to an in-hospital approach for treatment of symptomatic AT/AF. Randomized Patients were followed every 6months for 3years to assess the primary objective. Four-hundred-twenty patients have been enrolled in the study. At the end of the study 30 subjects died for cardiovascular causes, 60 had at least one hospitalization for cardiovascular causes and 14 developed permanent AF. Eighty-seven patients experienced a composite event. Hazard Ratio for device-managed automatic therapy arm compared to traditional was 0.987 (95% CI: 0.684-1.503; p=0.951). The primary endpoint analysis resulted in no difference between the device managed and in-hospital treatment arm. The TRADE-HF study failed to demonstrate a reduction in the composite of unplanned hospitalizations for cardiovascular causes or death for cardiovascular causes or progression to permanent AF using automatic atrial therapy compared to a traditional approach including hospitalization for symptomatic episodes and/or in-hospital treatment of AT/AF. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. A statistical overview of mass movement characteristics on the North American Atlantic outer continental margin

    USGS Publications Warehouse

    Booth, James S.; O'Leary, Dennis W.

    1992-01-01

    An analysis of 179 mass movements on the North American Atlantic continental slope and upper rise shows that slope failures have occurred throughout the geographic extent of the outer margin. Although the slope failures show no striking affinity for a particular depth as an origination level, there is a broad, primary mode centered at about 900 m. The resulting slides terminate at almost all depths and have a primary mode at 1100 m, but the slope/rise boundary (at 2200 m) also is an important mode. Slope failures have occurred at declivities ranging from 1° to 30° (typically, 4°); the resultant mass movement deposits vary in width from 0.2 to 50 km (typically, 1-2 km) and in length from 0.3 to 380 km (typically, 2–4 km), and they have been reported to be as thick as 650 m. On a numeric basis, mass movements are slightly more prevalent on open slopes than in other physiographic settings, and both translational and rotational failure surfaces are common. The typical mass movement is disintegrative in nature. Open slope slides tend to occur at lower slope angles and are larger than canyon slides. Further, large‐scale slides rather than small‐scale slides tend to originate on gentle slopes (≍ 3-4°). Rotational slope failures appear to have a slightly greater chance of occurring in canyons, but there is no analogous bias associated with translational failures. Similarly, disintegrative slides seem more likely to be associated with rotational slope failures than translational ones and are longer than their nondisintegrative counterparts. The occurrence of such a variety of mass movements at low declivities implies that a regional failure mechanism has prevailed. We suggest that earthquakes or, perhaps in some areas, gas hydrates are the most likely cause of the slope failures.

  8. Stress redistribution and damage in interconnects caused by electromigration

    NASA Astrophysics Data System (ADS)

    Chiras, Stefanie Ruth

    Electromigration has long been recognized as a phenomenon that induces mass redistribution in metals which, when constrained, can lead to the creation of stress. Since the development of the integrated circuit, electromigration. in interconnects, (the metal lines which carry current between devices in integrated circuits), has become a reliability concern. The primary failure mechanism in the interconnects is usually voiding, which causes electrical resistance increases in the circuit. In some cases, however, another failure mode occurs, fracture of the surrounding dielectric driven by electromigration induced compressive stresses within the interconnect. It is this failure mechanism that is the focus of this thesis. To study dielectric fracture, both residual processing stresses and the development of electromigration induced stress in isolated, constrained interconnects was measured. The high-resolution measurements were made using two types of piezospectroscopy, complemented by finite element analysis (FEA). Both procedures directly measured stress in the underlying or neighboring substrate and used FEA to determine interconnect stresses. These interconnect stresses were related to the effected circuit failure mode through post-test scanning electron microscopy and resistance measurements taken during electromigration testing. The results provide qualitative evidence of electromigration driven passivation fracture, and quantitative analysis of the theoretical model of the failure, the "immortal" interconnect concept.

  9. Explosive Event in MON-3 Oxidizer System Resulting from Pressure Transducer Failure

    NASA Technical Reports Server (NTRS)

    Baker, David L.; Reynolds, Michael; Anderson, John

    2006-01-01

    In 2003, a Druck(Registered Trademark) pressure transducer failed catastrophically in a test system circulating nitrogen tetroxide at NASA Johnson Space Center White Sands Test Facility. The cause of the explosion was not immediately obvious since the wetted areas of the pressure transducer were constructed of materials compatible with nitrogen tetroxide. Chemical analysis of the resulting residue and a materials analysis of the diaphragm and its weld zones were used to determine the chain of events that led to the catastrophic failure. Due to excessive dynamic pressure loading in the test system, the diaphragm in the pressure transducer suffered cyclic failure and allowed the silicon oil located behind the isolation diaphragm to mix with the nitrogen tetroxide. The reaction between these two chemicals formed a combination of 2,4-di and 2,4,6-trinitrophenol, which are shock sensitive explosives that caused the failure of the pressure transducer. Further research indicated numerous manufacturers offer similar pressure transducers with silicone oil separated from the test fluid by a thin stainless steel isolation diaphragm. Caution must be exercised when purchasing a pressure transducer for a particular system to avoid costly failures and test system contamination.

  10. [Relationship between hyperuricemia and prognosis in patients with heart failure of coronary heart disease after revascularization].

    PubMed

    Peng, D; Wang, S P; Zhao, D H; Fan, Q C; Shu, J; Liu, J H

    2018-05-08

    Objective: To explore the effect of hyperuricemia on prognosis in patients with heart failure of coronary heart disease (CHD) after revascularization. Methods: A single-center retrospective study of all subjects who underwent percutaneous coronary intervention (PCI) or coronary artery bypass grafting (CABG) as revascularization for CHD at Beijing Anzhen Hospital, Capital Medical University, between January 2005 and December 2014 was performed.Patients were divided into two groups by with or without hyperuricemia.The average follow-up was 1 818 d. Results: The Logistic regression analysis revealed that hyperuricemia was independent risk factors of readmission of heart failure( P =0.018, OR =1.499, 95% CI 1.071-2.098). The Cox regression analysis revealed that hyperuricemia was independent risk factor of all-cause mortality( P =0.002, RR =1.520, 95% CI 1.166-1.982), cardiovascular ( CV ) mortality( P =0.001, RR =1.811, 95% CI 1.279-2.566), heart failure mortality( P =0.006, RR =2.151, 95% CI 1.247-3.711). Conclusions: There is negative correlation between level of uric acid and left ventricular ejection fraction (LVEF). The patients with heart failure of coronary heart disease complicated with hyperuricemia have high risk of readmission of heart failure, all-cause mortality, CV mortality andheart failure mortality than patients with normal uric acid level. Hyperuricemia is an independent risk factor for patients with heart failure of coronary heart disease after revascularization.

  11. X-framework: Space system failure analysis framework

    NASA Astrophysics Data System (ADS)

    Newman, John Steven

    Space program and space systems failures result in financial losses in the multi-hundred million dollar range every year. In addition to financial loss, space system failures may also represent the loss of opportunity, loss of critical scientific, commercial and/or national defense capabilities, as well as loss of public confidence. The need exists to improve learning and expand the scope of lessons documented and offered to the space industry project team. One of the barriers to incorporating lessons learned include the way in which space system failures are documented. Multiple classes of space system failure information are identified, ranging from "sound bite" summaries in space insurance compendia, to articles in journals, lengthy data-oriented (what happened) reports, and in some rare cases, reports that treat not only the what, but also the why. In addition there are periodically published "corporate crisis" reports, typically issued after multiple or highly visible failures that explore management roles in the failure, often within a politically oriented context. Given the general lack of consistency, it is clear that a good multi-level space system/program failure framework with analytical and predictive capability is needed. This research effort set out to develop such a model. The X-Framework (x-fw) is proposed as an innovative forensic failure analysis approach, providing a multi-level understanding of the space system failure event beginning with the proximate cause, extending to the directly related work or operational processes and upward through successive management layers. The x-fw focus is on capability and control at the process level and examines: (1) management accountability and control, (2) resource and requirement allocation, and (3) planning, analysis, and risk management at each level of management. The x-fw model provides an innovative failure analysis approach for acquiring a multi-level perspective, direct and indirect causation of failures, and generating better and more consistent reports. Through this approach failures can be more fully understood, existing programs can be evaluated and future failures avoided. The x-fw development involved a review of the historical failure analysis and prevention literature, coupled with examination of numerous failure case studies. Analytical approaches included use of a relational failure "knowledge base" for classification and sorting of x-fw elements and attributes for each case. In addition a novel "management mapping" technique was developed as a means of displaying an integrated snapshot of indirect causes within the management chain. Further research opportunities will extend the depth of knowledge available for many of the component level cases. In addition, the x-fw has the potential to expand the scope of space sector lessons learned, and contribute to knowledge management and organizational learning.

  12. Development of the Nontechnical Skills for Officers of the Deck (NTSOD) Rating Form

    DTIC Science & Technology

    2010-12-01

    organizational model of human error commonly described as the ‘ Swiss Cheese ’ model. This model allows for the identification of active failures and latent...complete list). The authors did identify organizational and management issues as underlying causes to mishaps, similar to Reason’s Swiss Cheese model. 24

  13. Piloting through the Recession: Continuing Higher Education in Europe and the United Kingdom

    ERIC Educational Resources Information Center

    Roffe, Ian

    2009-01-01

    In common with the United States, Europe is currently experiencing a serious economic recession. The crisis, which started in the financial sector, is now rippling out and affecting heavily other economic sectors: construction, property, retailing, manufacturing, etc. The arguable cause of the crisis was a failure of management in financial…

  14. Ionized hypercalcemia in dogs: a retrospective study of 109 cases (1998-2003).

    PubMed

    Messinger, J S; Windham, W R; Ward, C R

    2009-01-01

    Serum hypercalcemia in dogs has been reported in association with a variety of diseases. Serum-ionized calcium (iCa) concentration is a more accurate measure of hypercalcemia than total serum calcium or corrected serum calcium concentrations. The severity of hypercalcemia has been utilized to suggest the most likely differential diagnosis for the hypercalcemia. Diseases causing ionized hypercalcemia may be different than those that cause increases in total or corrected serum calcium concentrations. The severity of ionized hypercalcemia in specific diseases cannot be used to determine the most likely differential diagnosis for ionized hypercalcemia. One-hundred and nine client-owned dogs with a definitive cause for their ionized hypercalcemia evaluated between 1998 and 2003 were included in this study. Retrospective, medical records review. Neoplasia, specifically lymphosarcoma, followed by renal failure, hyperparathyroidism, and hypoadrenocorticism were the most common causes of ionized hypercalcemia. Dogs with lymphoma and anal sac adenocarcinoma have higher serum iCa concentrations than those with renal failure, hypoadrenocorticism, and other types of neoplasia. The magnitude of serum-ionized hypercalcemia did not predict specific disease states. Serum-ionized hypercalcemia was most commonly associated with neoplasia, specifically lymphosarcoma. Although dogs with lymphosarcoma and anal sac adenocarcinoma had higher serum iCa concentrations than dogs with other diseases, the magnitude of the serum iCa concentration could not be used to predict the cause of hypercalcemia. Total serum calcium and corrected calcium concentrations did not accurately reflect the calcium status of the dogs in this study.

  15. Reliability enhancement of APR + diverse protection system regarding common cause failures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Oh, Y. G.; Kim, Y. M.; Yim, H. S.

    2012-07-01

    The Advanced Power Reactor Plus (APR +) nuclear power plant design has been developed on the basis of the APR1400 (Advanced Power Reactor 1400 MWe) to further enhance safety and economics. For the mitigation of Anticipated Transients Without Scram (ATWS) as well as Common Cause Failures (CCF) within the Plant Protection System (PPS) and the Emergency Safety Feature - Component Control System (ESF-CCS), several design improvement features have been implemented for the Diverse Protection System (DPS) of the APR + plant. As compared to the APR1400 DPS design, the APR + DPS has been designed to provide the Safety Injectionmore » Actuation Signal (SIAS) considering a large break LOCA accident concurrent with the CCF. Additionally several design improvement features, such as channel structure with redundant processing modules, and changes of system communication methods and auto-system test methods, are introduced to enhance the functional reliability of the DPS. Therefore, it is expected that the APR + DPS can provide an enhanced safety and reliability regarding possible CCF in the safety-grade I and C systems as well as the DPS itself. (authors)« less

  16. Delirium pathophysiology: An updated hypothesis of the etiology of acute brain failure.

    PubMed

    Maldonado, José R

    2017-12-26

    Delirium is the most common neuropsychiatric syndrome encountered by clinicians dealing with older adults and the medically ill and is best characterized by 5 core domains: cognitive deficits, attentional deficits, circadian rhythm dysregulation, emotional dysregulation, and alteration in psychomotor functioning. An extensive literature review and consolidation of published data into a novel interpretation of known pathophysiological causes of delirium. Available data suggest that numerous pathological factors may serve as precipitants for delirium, each having differential effects depending on patient-specific patient physiological characteristics (substrate). On the basis of an extensive literature search, a newly proposed theory, the systems integration failure hypothesis, was developed to bring together the most salient previously described theories, by describing the various contributions from each into a complex web of pathways-highlighting areas of intersection and commonalities and explaining how the variable contribution of these may lead to the development of various cognitive and behavioral dysfunctions characteristic of delirium. The specific cognitive and behavioral manifestations of the specific delirium picture result from a combination of neurotransmitter function and availability, variability in integration and processing of sensory information, motor responses to both external and internal cues, and the degree of breakdown in neuronal network connectivity, hence the term acute brain failure. The systems integration failure hypothesis attempts to explain how the various proposed delirium pathophysiologic theories interact with each other, causing various clinically observed delirium phenotypes. A better understanding of the underlying pathophysiology of delirium may eventually assist in designing better prevention and management approaches. Copyright © 2017 John Wiley & Sons, Ltd.

  17. Field failure mechanisms for photovoltaic modules

    NASA Technical Reports Server (NTRS)

    Dumas, L. N.; Shumka, A.

    1981-01-01

    Beginning in 1976, Department of Energy field centers have installed and monitored a number of field tests and application experiments using current state-of-the-art photovoltaic modules. On-site observations of module physical and electrical degradation, together with in-depth laboratory analysis of failed modules, permits an overall assessment of the nature and causes of early field failures. Data on failure rates are presented, and key failure mechanisms are analyzed with respect to origin, effect, and prospects for correction. It is concluded that all failure modes identified to date are avoidable or controllable through sound design and production practices.

  18. Detailed investigation of causes of avionics field failures

    NASA Astrophysics Data System (ADS)

    Kallis, J. M.; Buechler, D. W.; Richardson, Z. C.; Backes, P. G.; Lopez, S. B.; Erickson, J. J.; van Westerhuyzen, D. H.

    A detailed analysis of digital and analog modules from the F-15 AN/APG-63 Radar was performed to identify the kinds, types, and number of life models based on observed failure modes, mechanisms, locations, and characteristics needed to perform a Failure Free Operating Period prediction for these items. It is found that a significant fraction of the failures of the analog module and a small fraction of those of the digital module resulted from the exacerbation of latent defects by environmental stresses. It is also found that the fraction of failures resulting from thermal cycling and vibration is small.

  19. Kidney Failure

    MedlinePlus

    ... store Donate Now Give Monthly Give In Honor Kidney Failure (ESRD) Causes, Symptoms, & Treatments www.kidneyfund.org > ... Disaster preparedness Kidney failure/ESRD diet What causes kidney failure? In most cases, kidney failure is caused ...

  20. Biomaterial-host interactions: consequences, determined by implant retrieval analysis.

    PubMed

    Kaplan, S S

    1994-01-01

    Prosthetic biomaterials have had a profound impact on reconstructive surgery but complete biocompatability remains illusive. This review considers the retrieval analysis of four common prosthetic structures: the hip, the knee, heart valves, and blood vessels. We show that despite a fine record of early success, deterioration due to mechanical failure or deleterious host responses to the implant may compromise long term function. The eventual retrieval and detailed analysis of implanted structures provides an invaluable opportunity to determine the characteristics of implant success or failure and to provoke the development of still better materials.

  1. Gearbox Reliability Collaborative Phase 3 Gearbox 3 Test Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Keller, Jonathan; Wallen, Robb

    Many gearboxes in wind turbines do not achieve their expected design life; they do, however, commonly meet or exceed the design criteria specified in current standards in the gear, bearing, and wind turbine industry as well as third-party certification criteria. The cost of gearbox replacements and rebuilds, as well as the downtime associated with these failures, increases the cost of wind energy. In 2007, the U.S. Department of Energy established the National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC). Its goals are to understand the root causes of premature gearbox failures and to improve their reliability. The GRC ismore » examining a hypothesis that the gap between design-estimated and actual wind turbine gearbox reliability is caused by underestimation of loads, inaccurate design tools, the absence of critical elements in the design process, or insufficient testing. This report describes the recently completed tests of GRC Gearbox 3 in the National Wind Technology Center dynamometer and documents any modifications to the original test plan. In this manner, it serves as a guide for interpreting the publicly released data sets with brief analyses to illustrate the data. The primary test objective was to measure the planetary load-sharing characteristics in the same conditions as the original GRC gearbox design. If the measured load-sharing characteristics are close to the design model, the projected improvement in planetary section fatigue life and the efficacy of preloaded TRBs in mitigating the planetary bearing fatigue failure mode will have been demonstrated. Detailed analysis of that test objective will be presented in subsequent publications.« less

  2. Treatment Failure With Rhythm and Rate Control Strategies in Patients With Atrial Fibrillation and Congestive Heart Failure: An AF-CHF Substudy.

    PubMed

    Dyrda, Katia; Roy, Denis; Leduc, Hugues; Talajic, Mario; Stevenson, Lynne Warner; Guerra, Peter G; Andrade, Jason; Dubuc, Marc; Macle, Laurent; Thibault, Bernard; Rivard, Lena; Khairy, Paul

    2015-12-01

    Rate and rhythm control strategies for atrial fibrillation (AF) are not always effective or well tolerated in patients with congestive heart failure (CHF). We assessed reasons for treatment failure, associated characteristics, and effects on survival. A total of 1,376 patients enrolled in the AF-CHF trial were followed for 37  ±  19 months, 206 (15.0%) of whom failed initial therapy leading to crossover. Rhythm control was abandoned more frequently than rate control (21.0% vs. 9.1%, P < 0.0001). Crossovers from rhythm to rate control were driven by inefficacy, whereas worsening heart failure was the most common reason to crossover from rate to rhythm control. In multivariate analyses, failure of rhythm control was associated with female sex, higher serum creatinine, functional class III or IV symptoms, lack of digoxin, and oral anticoagulation. Factors independently associated with failure of rate control were paroxysmal (vs. persistent) AF, statin therapy, and presence of an implantable cardioverter-defibrillator. Crossovers were not associated with cardiovascular mortality (hazard ratio [HR] 1.11 from rhythm to rate control; 95% confidence interval [95% CI, 0.73-1.73]; P = 0.6069; HR 1.29 from rate to rhythm control; 95% CI, 0.73-2.25; P = 0.3793) or all-cause mortality (HR 1.16 from rhythm to rate control, 95% CI [0.79-1.72], P = 0.4444; HR 1.15 from rate to rhythm control, 95% [0.69, 1.91], P = 0.5873). Rhythm control is abandoned more frequently than rate control in patients with AF and CHF. The most common reasons for treatment failure are inefficacy for rhythm control and worsening heart failure for rate control. Changing strategies does not impact survival. © 2015 Wiley Periodicals, Inc.

  3. Heart failure and sudden cardiac death in heritable thoracic aortic disease caused by pathogenic variants in the SMAD3 gene.

    PubMed

    Backer, Julie De; Braverman, Alan C

    2018-05-01

    Predominant cardiovascular manifestations in the spectrum of Heritable Thoracic Aortic Disease include by default aortic root aneurysms- and dissections, which may be associated with aortic valve disease. Mitral- and tricuspid valve prolapse are other commonly recognized features. Myocardial disease, characterized by heart failure and/or malignant arrhythmias has been reported in humans and in animal models harboring pathogenic variants in the Fibrillin1 gene. Description of clinical history of three cases from one family in Ghent (Belgium) and one family in St. Louis (US). We report on three cases from two families presenting end-stage heart failure (in two) and lethal arrhythmias associated with moderate left ventricular dilatation (in one). All three cases harbor a pathogenic variant in the SMAD3 gene, known to cause aneurysm osteoarthritis syndrome, Loeys-Dietz syndrome type 3 or isolated Heritable Thoracic Aortic Disease. These unusual presentations warrant awareness for myocardial disease in patients harboring pathogenic variants in genes causing Heritable Thoracic Aortic Disease and indicate the need for prospective studies in larger cohorts. © 2018 The Authors. Molecular Genetics & Genomic Medicine published by Wiley Periodicals, Inc.

  4. Computational medical imaging and hemodynamics framework for functional analysis and assessment of cardiovascular structures.

    PubMed

    Wong, Kelvin K L; Wang, Defeng; Ko, Jacky K L; Mazumdar, Jagannath; Le, Thu-Thao; Ghista, Dhanjoo

    2017-03-21

    Cardiac dysfunction constitutes common cardiovascular health issues in the society, and has been an investigation topic of strong focus by researchers in the medical imaging community. Diagnostic modalities based on echocardiography, magnetic resonance imaging, chest radiography and computed tomography are common techniques that provide cardiovascular structural information to diagnose heart defects. However, functional information of cardiovascular flow, which can in fact be used to support the diagnosis of many cardiovascular diseases with a myriad of hemodynamics performance indicators, remains unexplored to its full potential. Some of these indicators constitute important cardiac functional parameters affecting the cardiovascular abnormalities. With the advancement of computer technology that facilitates high speed computational fluid dynamics, the realization of a support diagnostic platform of hemodynamics quantification and analysis can be achieved. This article reviews the state-of-the-art medical imaging and high fidelity multi-physics computational analyses that together enable reconstruction of cardiovascular structures and hemodynamic flow patterns within them, such as of the left ventricle (LV) and carotid bifurcations. The combined medical imaging and hemodynamic analysis enables us to study the mechanisms of cardiovascular disease-causing dysfunctions, such as how (1) cardiomyopathy causes left ventricular remodeling and loss of contractility leading to heart failure, and (2) modeling of LV construction and simulation of intra-LV hemodynamics can enable us to determine the optimum procedure of surgical ventriculation to restore its contractility and health This combined medical imaging and hemodynamics framework can potentially extend medical knowledge of cardiovascular defects and associated hemodynamic behavior and their surgical restoration, by means of an integrated medical image diagnostics and hemodynamic performance analysis framework.

  5. Large-scale data analysis of power grid resilience across multiple US service regions

    NASA Astrophysics Data System (ADS)

    Ji, Chuanyi; Wei, Yun; Mei, Henry; Calzada, Jorge; Carey, Matthew; Church, Steve; Hayes, Timothy; Nugent, Brian; Stella, Gregory; Wallace, Matthew; White, Joe; Wilcox, Robert

    2016-05-01

    Severe weather events frequently result in large-scale power failures, affecting millions of people for extended durations. However, the lack of comprehensive, detailed failure and recovery data has impeded large-scale resilience studies. Here, we analyse data from four major service regions representing Upstate New York during Super Storm Sandy and daily operations. Using non-stationary spatiotemporal random processes that relate infrastructural failures to recoveries and cost, our data analysis shows that local power failures have a disproportionally large non-local impact on people (that is, the top 20% of failures interrupted 84% of services to customers). A large number (89%) of small failures, represented by the bottom 34% of customers and commonplace devices, resulted in 56% of the total cost of 28 million customer interruption hours. Our study shows that extreme weather does not cause, but rather exacerbates, existing vulnerabilities, which are obscured in daily operations.

  6. A rare large mutation involving two exons of the SP-B gene in an infant with severe respiratory distress.

    PubMed

    Takcı, Şahin; Anuk-İnce, Deniz; Louha, Malek; Couderc, Remy; Çakar, Nursen; Köseoğlu, Reşit Doğan; Ateş, Ömer

    2017-01-01

    Takcı Ş, Anuk-İnce D, Louha M, Couderc R, Çakar N, Köseoğlu RD, Ateş Ö. A rare large mutation involving two exons of the SP-B gene in an infant with severe respiratory distress. Turk J Pediatr 2017; 59: 483-486. Hereditary surfactant protein-B (SP-B) deficiency is a rare autosomal recessive disease of newborn infants causing severe respiratory failure and death within the first year of life. The most common cause of SP-B deficiency is a frameshift mutation in exon 4 (121ins2) in the gene encoding SP-B. We report a term infant with unremitting respiratory distress who was unresponsive to all treatment modalities. The parents were consanguineous and a term sibling of the infant had died due to respiratory failure without a certain diagnosis. In the first step of the diagnostic work-up, common genetic mutations for SP-B, surfactant protein C and ATP-binding cassette s3 were absent, however sequencing of SP-B gene revealed a large homozygous genomic deletion covering exon 8 and 9. In this case report, we aimed to emphasize further genetic evaluation in all cases suggestive of surfactant dysfunction, even if common mutations are absent.

  7. Ingestion of Fireworks: Rare Cause of Poisoning in Children.

    PubMed

    Yuksekkaya, Hasan; Gumus, Meltem; Yucel, Aylin; Energin, Meltem; Demirci, Serafettin

    2018-03-12

    Mistaken ingestion of all manner of toxic matter is common in childhood, but poisoning with fireworks and matchsticks is rare. Fireworks usually contain 10% yellow phosphorus and 50% potassium chlorate. Potassium chlorate is an extremely reactive and toxic agent that is used in fireworks and matchstick heads. Eleven cases (7 females and 5 males; median age, 36 months [ranging from 24 to 48 months]) of poisoning after ingestion of fireworks and matchstick(s), between February 2008 and June 2014, were reviewed. The most common initial symptom was vomiting except for 2 cases in this group. Biochemical tests indicated that hyperphosphatemia was present in all patients, 8 patients (72.7%) had subclinical hepatic injury, 1 (9%) had acute hepatic failure, and 2 patients had no clinical or biochemical evidence of hepatic damage. Three patients had renal impairment, but none of them required dialysis. All of the patients recovered with supportive therapy except for 2 cases. One patient underwent cadaveric liver transplantation, whereas the other died because of circulatory dysfunction and respiratory failure due to pulmonary alveolar hemorrhage. Without prompt intervention, poisoning with fireworks carries high morbidity and mortality in children. It can cause pulmonary hemorrhage, in addition to other organ damage, including liver and kidney. Hyperphosphatemia is common, as it was seen in all of the study patients.

  8. Single living predicts a higher mortality in both women and men with chronic heart failure.

    PubMed

    Mard, Shan; Nielsen, Finn Erland

    2016-09-01

    We examined the impact of single living on all-cause mortality in patients with chronic heart failure and determined if this association was modified by gender. This historical cohort study included 637 patients who were admitted to the Department of Cardiology, Herlev Hospital, Denmark, between 1 July 2005 and 30 June 2007. Baseline clinical data were obtained from patient records. Data on survival rates were obtained from the Danish Civil Registration System. Cox proportional hazard analysis was used to compute the hazard ratio (HR) of all-cause mortality, controlling for confounding factors. The median follow-up time was 2.8 years. A total of 323 (50.7%) patients died during the follow-up period. After adjustment for confounding factors, risk of death was associated with being single (HR = 1.53 (95% confidence interval: 1.19-1.96)). In a gender-stratified analysis, the risk of death did not differ among single-living women and men. Single living is a prognostic determinant of all-cause mortality in men and women with chronic heart failure. none. not relevant.

  9. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, Jiangjiang; Li, Weixuan; Lin, Guang

    In decision-making for groundwater management and contamination remediation, it is important to accurately evaluate the probability of the occurrence of a failure event. For small failure probability analysis, a large number of model evaluations are needed in the Monte Carlo (MC) simulation, which is impractical for CPU-demanding models. One approach to alleviate the computational cost caused by the model evaluations is to construct a computationally inexpensive surrogate model instead. However, using a surrogate approximation can cause an extra error in the failure probability analysis. Moreover, constructing accurate surrogates is challenging for high-dimensional models, i.e., models containing many uncertain input parameters.more » To address these issues, we propose an efficient two-stage MC approach for small failure probability analysis in high-dimensional groundwater contaminant transport modeling. In the first stage, a low-dimensional representation of the original high-dimensional model is sought with Karhunen–Loève expansion and sliced inverse regression jointly, which allows for the easy construction of a surrogate with polynomial chaos expansion. Then a surrogate-based MC simulation is implemented. In the second stage, the small number of samples that are close to the failure boundary are re-evaluated with the original model, which corrects the bias introduced by the surrogate approximation. The proposed approach is tested with a numerical case study and is shown to be 100 times faster than the traditional MC approach in achieving the same level of estimation accuracy.« less

  10. Software reliability experiments data analysis and investigation

    NASA Technical Reports Server (NTRS)

    Walker, J. Leslie; Caglayan, Alper K.

    1991-01-01

    The objectives are to investigate the fundamental reasons which cause independently developed software programs to fail dependently, and to examine fault tolerant software structures which maximize reliability gain in the presence of such dependent failure behavior. The authors used 20 redundant programs from a software reliability experiment to analyze the software errors causing coincident failures, to compare the reliability of N-version and recovery block structures composed of these programs, and to examine the impact of diversity on software reliability using subpopulations of these programs. The results indicate that both conceptually related and unrelated errors can cause coincident failures and that recovery block structures offer more reliability gain than N-version structures if acceptance checks that fail independently from the software components are available. The authors present a theory of general program checkers that have potential application for acceptance tests.

  11. Evaluation of near-miss and adverse events in radiation oncology using a comprehensive causal factor taxonomy.

    PubMed

    Spraker, Matthew B; Fain, Robert; Gopan, Olga; Zeng, Jing; Nyflot, Matthew; Jordan, Loucille; Kane, Gabrielle; Ford, Eric

    Incident learning systems (ILSs) are a popular strategy for improving safety in radiation oncology (RO) clinics, but few reports focus on the causes of errors in RO. The goal of this study was to test a causal factor taxonomy developed in 2012 by the American Association of Physicists in Medicine and adopted for use in the RO: Incident Learning System (RO-ILS). Three hundred event reports were randomly selected from an institutional ILS database and Safety in Radiation Oncology (SAFRON), an international ILS. The reports were split into 3 groups of 100 events each: low-risk institutional, high-risk institutional, and SAFRON. Three raters retrospectively analyzed each event for contributing factors using the American Association of Physicists in Medicine taxonomy. No events were described by a single causal factor (median, 7). The causal factor taxonomy was found to be applicable for all events, but 4 causal factors were not described in the taxonomy: linear accelerator failure (n = 3), hardware/equipment failure (n = 2), failure to follow through with a quality improvement intervention (n = 1), and workflow documentation was misleading (n = 1). The most common causal factor categories contributing to events were similar in all event types. The most common specific causal factor to contribute to events was a "slip causing physical error." Poor human factors engineering was the only causal factor found to contribute more frequently to high-risk institutional versus low-risk institutional events. The taxonomy in the study was found to be applicable for all events and may be useful in root cause analyses and future studies. Communication and human behaviors were the most common errors affecting all types of events. Poor human factors engineering was found to specifically contribute to high-risk more than low-risk institutional events, and may represent a strategy for reducing errors in all types of events. Copyright © 2017 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

  12. Clinical Immunology Review Series: An approach to the patient with angio-oedema

    PubMed Central

    Grigoriadou, S; Longhurst, H J

    2009-01-01

    Angio-oedema is a common reason for attendance at the accident and emergency department and for referral to immunology/allergy clinics. Causative factors should always be sought, but a large proportion of patients have the idiopathic form of the disease. A minority of patients represent a diagnostic and treatment challenge. Failure to identify the more unusual causes of angio-oedema may result in life-threatening situations. Common and rare causes of angio-oedema will be discussed in this article, as well as the diagnostic and treatment pathways for the management of these patients. A comprehensive history and close monitoring of response to treatment are the most cost-effective diagnostic and treatment tools. PMID:19220828

  13. Failure mode and effects analysis to reduce risk of anticoagulation levels above the target range during concurrent antimicrobial therapy.

    PubMed

    Daniels, Lisa M; Barreto, Jason N; Kuth, John C; Anderson, Jeremy R; Zhang, Beilei; Majka, Andrew J; Morgenthaler, Timothy I; Tosh, Pritish K

    2015-07-15

    A failure mode and effects analysis (FMEA) was conducted to analyze the clinical and operational processes leading to above-target International Normalized Ratios (INRs) in warfarin-treated patients receiving concurrent antimicrobial therapy. The INRs of patients on long-term warfarin therapy who received a course of trimethoprim-sulfamethoxazole, metronidazole, fluconazole, miconazole, or voriconazole (highly potentiating antimicrobials, or HPAs) between September 1 and December 31, 2011, were compared with patients on long-term warfarin therapy who did not receive any antimicrobial during the same period. A multidisciplinary team of physicians, pharmacists, and a systems analyst was then formed to complete a step-by-step outline of the processes involved in warfarin management and concomitant HPA therapy, followed by an FMEA. Patients taking trimethoprim-sulfamethoxazole, metronidazole, or fluconazole demonstrated a significantly increased risk of having an INR of >4.5. The FMEA identified 134 failure modes. The most common failure modes were as follows: (1) electronic medical records did not identify all patients receiving warfarin, (2) HPA prescribers were unaware of recommended warfarin therapy when HPAs were prescribed, (3) HPA prescribers were unaware that a patient was taking warfarin and that the drug interaction is significant, and (4) warfarin managers were unaware that an HPA had been prescribed for a patient. An FMEA determined that the risk of adverse events caused by concomitantly administering warfarin and HPAs can be decreased by preemptively identifying patients receiving warfarin, having a care process in place, alerting providers about the patient's risk status, and notifying providers at the anticoagulation clinic. Copyright © 2015 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  14. A formula for successfully competing in non-US health insurance markets.

    PubMed

    Beichl, Lisa; Gunnery, Lisa; Navarro, José Antonio

    2003-01-01

    Many insurers in non-US markets are experiencing difficulties in developing managed care strategies to combat increasing medical costs. Some attempts to transport managed care techniques outside of the US have failed. Although it is difficult to determine the exact causes of failure, some common threads exist. When these common characteristics are explored, fundamental building blocks will emerge. When introduced, these fundamentals can lead to increased efficiency, thereby paving the way to successful managed care development in non-US markets.

  15. Maternal and fetal outcomes in pregnant women with heart failure.

    PubMed

    Ng, Angie T; Duan, Lewei; Win, Theresa; Spencer, Hillard T; Lee, Ming-Sum

    2018-05-25

    The goal of this study is to report the prevalence, aetiology and clinical outcome of pregnant women with heart failure. This is a retrospective community-based cohort study that included pregnant women in the Kaiser Permanente Health System between 2003 and 2014. Women with heart failure were identified using International Classification of Disease, Ninth Revision codes. Medical records were manually reviewed to confirm diagnosis and adjudicate outcomes. In a cohort of 385 935 pregnancies, 488 (0.13%) had a diagnosis of heart failure, corresponding to 126 cases per 100 000 pregnancies. Peripartum cardiomyopathy was the most common cause of heart failure, accounting for 333 (68.2%) cases. Preterm birth and caesarean delivery were more common in patients with heart failure. Neonatal death rate was higher in the heart failure group (1.0% vs 0.4%, p=0.03). Infants delivered to women with heart failure had lower birth weights (3112.0±774.0 g vs 3331.9±575.5 g, p<0.001) and lower Apgar score at 1 min (7.9±1.5 vs 8.3±1.1, p<0.001). Median follow-up was 6.2 years (IQR 3.2-9.2). During follow-up, 7 (1.4%) in the heart failure group and 423 (0.11%) in the control group died. Heart failure was associated with a 7.7-fold increase risk of death (adjusted HR 7.7, 95% CI 3.6 to 16.4, p<0.001). Heart failure during pregnancy is associated with unfavourable fetal outcomes including prematurity and low birth weight. While the overall mortality rate was low, pregnant women with heart failure carried an excess risk of death compared with controls. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  16. The Nature of Procrastination: A Meta-Analytic and Theoretical Review of Quintessential Self-Regulatory Failure

    ERIC Educational Resources Information Center

    Steel, Piers

    2007-01-01

    Procrastination is a prevalent and pernicious form of self-regulatory failure that is not entirely understood. Hence, the relevant conceptual, theoretical, and empirical work is reviewed, drawing upon correlational, experimental, and qualitative findings. A meta-analysis of procrastination's possible causes and effects, based on 691 correlations,…

  17. Failure Analysis for Composition of Web Services Represented as Labeled Transition Systems

    NASA Astrophysics Data System (ADS)

    Nadkarni, Dinanath; Basu, Samik; Honavar, Vasant; Lutz, Robyn

    The Web service composition problem involves the creation of a choreographer that provides the interaction between a set of component services to realize a goal service. Several methods have been proposed and developed to address this problem. In this paper, we consider those scenarios where the composition process may fail due to incomplete specification of goal service requirements or due to the fact that the user is unaware of the functionality provided by the existing component services. In such cases, it is desirable to have a composition algorithm that can provide feedback to the user regarding the cause of failure in the composition process. Such feedback will help guide the user to re-formulate the goal service and iterate the composition process. We propose a failure analysis technique for composition algorithms that views Web service behavior as multiple sequences of input/output events. Our technique identifies the possible cause of composition failure and suggests possible recovery options to the user. We discuss our technique using a simple e-Library Web service in the context of the MoSCoE Web service composition framework.

  18. Use of Failure Mode and Effects Analysis to Improve Emergency Department Handoff Processes.

    PubMed

    Sorrentino, Patricia

    2016-01-01

    The purpose of this article is to describe a quality improvement process using failure mode and effects analysis (FMEA) to evaluate systems handoff communication processes, improve emergency department (ED) throughput and reduce crowding through development of a standardized handoff, and, ultimately, improve patient safety. Risk of patient harm through ineffective communication during handoff transitions is a major reason for breakdown of systems. Complexities of ED processes put patient safety at risk. An increased incidence of submitted patient safety event reports for handoff communication failures between the ED and inpatient units solidified a decision to implement the use of FMEA to identify handoff failures to mitigate patient harm through redesign. The clinical nurse specialist implemented an FMEA. Handoff failure themes were created from deidentified retrospective reviews. Weekly meetings were held over a 3-month period to identify failure modes and determine cause and effect on the process. A functional block diagram process map tool was used to illustrate handoff processes. An FMEA grid was used to list failure modes and assign a risk priority number to quantify results. Multiple areas with actionable failures were identified. A majority of causes for high-priority failure modes were specific to communications. Findings demonstrate the complexity of transition and handoff processes. The FMEA served to identify and evaluate risk of handoff failures and provide a framework for process improvement. A focus on mentoring nurses to quality handoff processes so that it becomes habitual practice is crucial to safe patient transitions. Standardizing content and hardwiring within the system are best practice. The clinical nurse specialist is prepared to provide strong leadership to drive and implement system-wide quality projects.

  19. Prediction of Composite Laminate Strength Properties Using a Refined Zigzag Plate Element

    NASA Technical Reports Server (NTRS)

    Barut, Atila; Madenci, Erdogan; Tessler, Alexander

    2013-01-01

    This study presents an approach that uses the refined zigzag element, RZE(exp2,2) in conjunction with progressive failure criteria to predict the ultimate strength of composite laminates based on only ply-level strength properties. The methodology involves four major steps: (1) Determination of accurate stress and strain fields under complex loading conditions using RZE(exp2,2)-based finite element analysis, (2) Determination of failure locations and failure modes using the commonly accepted Hashin's failure criteria, (3) Recursive degradation of the material stiffness, and (4) Non-linear incremental finite element analysis to obtain stress redistribution until global failure. The validity of this approach is established by considering the published test data and predictions for (1) strength of laminates under various off-axis loading, (2) strength of laminates with a hole under compression, and (3) strength of laminates with a hole under tension.

  20. Preventing medical errors by designing benign failures.

    PubMed

    Grout, John R

    2003-07-01

    One way to successfully reduce medical errors is to design health care systems that are more resistant to the tendencies of human beings to err. One interdisciplinary approach entails creating design changes, mitigating human errors, and making human error irrelevant to outcomes. This approach is intended to facilitate the creation of benign failures, which have been called mistake-proofing devices and forcing functions elsewhere. USING FAULT TREES TO DESIGN FORCING FUNCTIONS: A fault tree is a graphical tool used to understand the relationships that either directly cause or contribute to the cause of a particular failure. A careful analysis of a fault tree enables the analyst to anticipate how the process will behave after the change. EXAMPLE OF AN APPLICATION: A scenario in which a patient is scalded while bathing can serve as an example of how multiple fault trees can be used to design forcing functions. The first fault tree shows the undesirable event--patient scalded while bathing. The second fault tree has a benign event--no water. Adding a scald valve changes the outcome from the undesirable event ("patient scalded while bathing") to the benign event ("no water") Analysis of fault trees does not ensure or guarantee that changes necessary to eliminate error actually occur. Most mistake-proofing is used to prevent simple errors and to create well-defended processes, but complex errors can also result. The utilization of mistake-proofing or forcing functions can be thought of as changing the logic of a process. Errors that formerly caused undesirable failures can be converted into the causes of benign failures. The use of fault trees can provide a variety of insights into the design of forcing functions that will improve patient safety.

  1. Characterization of emission microscopy and liquid crystal thermography in IC fault localization

    NASA Astrophysics Data System (ADS)

    Lau, C. K.; Sim, K. S.

    2013-05-01

    This paper characterizes two fault localization techniques - Emission Microscopy (EMMI) and Liquid Crystal Thermography (LCT) by using integrated circuit (IC) leakage failures. The majority of today's semiconductor failures do not reveal a clear visual defect on the die surface and therefore require fault localization tools to identify the fault location. Among the various fault localization tools, liquid crystal thermography and frontside emission microscopy are commonly used in most semiconductor failure analysis laboratories. Many people misunderstand that both techniques are the same and both are detecting hot spot in chip failing with short or leakage. As a result, analysts tend to use only LCT since this technique involves very simple test setup compared to EMMI. The omission of EMMI as the alternative technique in fault localization always leads to incomplete analysis when LCT fails to localize any hot spot on a failing chip. Therefore, this research was established to characterize and compare both the techniques in terms of their sensitivity in detecting the fault location in common semiconductor failures. A new method was also proposed as an alternative technique i.e. the backside LCT technique. The research observed that both techniques have successfully detected the defect locations resulted from the leakage failures. LCT wass observed more sensitive than EMMI in the frontside analysis approach. On the other hand, EMMI performed better in the backside analysis approach. LCT was more sensitive in localizing ESD defect location and EMMI was more sensitive in detecting non ESD defect location. Backside LCT was proven to work as effectively as the frontside LCT and was ready to serve as an alternative technique to the backside EMMI. The research confirmed that LCT detects heat generation and EMMI detects photon emission (recombination radiation). The analysis results also suggested that both techniques complementing each other in the IC fault localization. It is necessary for a failure analyst to use both techniques when one of the techniques produces no result.

  2. Assessment of a cooperative workstation.

    PubMed Central

    Beuscart, R. J.; Molenda, S.; Souf, N.; Foucher, C.; Beuscart-Zephir, M. C.

    1996-01-01

    Groupware and new Information Technologies have now made it possible for people in different places to work together in synchronous cooperation. Very often, designers of this new type of software are not provided with a model of the common workspace, which is prejudicial to software development and its acceptance by potential users. The authors take the example of a task of medical co-diagnosis, using a multi-media communication workstation. Synchronous cooperative work is made possible by using local ETHERNET or public ISDN Networks. A detailed ergonomic task analysis studies the cognitive functioning of the physicians involved, compares their behaviour in the normal and the mediatized situations, and leads to an interpretation of the likely causes for success or failure of CSCW tools. PMID:8947764

  3. Key performance outcomes of patient safety curricula: root cause analysis, failure mode and effects analysis, and structured communications skills.

    PubMed

    Fassett, William E

    2011-10-10

    As colleges and schools of pharmacy develop core courses related to patient safety, course-level outcomes will need to include both knowledge and performance measures. Three key performance outcomes for patient safety coursework, measured at the course level, are the ability to perform root cause analyses and healthcare failure mode effects analyses, and the ability to generate effective safety communications using structured formats such as the Situation-Background-Assessment-Recommendation (SBAR) situational briefing model. Each of these skills is widely used in patient safety work and competence in their use is essential for a pharmacist's ability to contribute as a member of a patient safety team.

  4. Effects of self-management intervention on health outcomes of patients with heart failure: a systematic review of randomized controlled trials

    PubMed Central

    Jovicic, Aleksandra; Holroyd-Leduc, Jayna M; Straus, Sharon E

    2006-01-01

    Background Heart failure is the most common cause of hospitalization among adults over 65. Over 60% of patients die within 10 years of first onset of symptoms. The objective of this study is to determine the effectiveness of self-management interventions on hospital readmission rates, mortality, and health-related quality of life in patients diagnosed with heart failure. Methods The study is a systematic review of randomized controlled trials. The following data sources were used: MEDLINE (1966-11/2005), EMBASE (1980-11/2005), CINAHL (1982-11/2005), the ACP Journal Club database (to 11/2005), the Cochrane Central Trial Registry and the Cochrane Database of Systematic Reviews (to 11/2005); article reference lists; and experts in the field. We included randomized controlled trials of self-management interventions that enrolled patients 18 years of age or older who were diagnosed with heart failure. The primary outcomes of interest were all-cause hospital readmissions, hospital readmissions due to heart failure, and mortality. Secondary outcomes were compliance with treatment and quality of life scores. Three reviewers independently assessed the quality of each study and abstracted the results. For each included study, we computed the pooled odds ratios (OR) for all-cause hospital readmission, hospital readmission due to heart failure, and death. We used a fixed effects model to quantitatively synthesize results. We were not able to pool effects on health-related quality of life and measures of compliance with treatment, but we summarized the findings from the relevant studies. We also summarized the reported cost savings. Results From 671 citations that were identified, 6 randomized trials with 857 patients were included in the review. Self-management decreased all-cause hospital readmissions (OR 0.59; 95% confidence interval (CI) 0.44 to 0.80, P = 0.001) and heart failure readmissions (OR 0.44; 95% CI 0.27 to 0.71, P = 0.001). The effect on mortality was not significant (OR = 0.93; 95% CI 0.57 to 1.51, P = 0.76). Adherence to prescribed medical advice improved, but there was no significant difference in functional capabilities, symptom status and quality of life. The reported savings ranged from $1300 to $7515 per patient per year. Conclusion Self-management programs targeted for patients with heart failure decrease overall hospital readmissions and readmissions for heart failure. PMID:17081306

  5. Organizational Failure in an NHS Hospital Trust: A Qualitative Study.

    PubMed

    Ravaghi, Hamid; Mannion, Russell; Sajadi, Haniye Sadat

    2015-01-01

    The objective was to explore the key factors associated with organizational failure in an NHS Hospital Trust. This case study adopted a qualitative design. Fifty-seven semistructured interviews and document analyses were conducted as well. Data were analyzed using a framework analysis method. A range of symptoms of organizational performance failure was identified. These relate to a financial deficit, lack of good external relationships, inability to meet core targets, a lack of clear management systems, and low staff morale. These markers had not been taken seriously by the previous senior management team. Symptoms of failure were the reflection of presence of secondary and primary causes of failure. Poor managerial leadership, poor financial control and performance management, lack of open culture, distraction by 2 large projects, and the lack of clinician engagement were perceived as internal causes of failure and the high level of policy changes within the NHS as the key external cause. The level of deprivation in the area was also thought to have had a negative impact on performance. The findings reinforce and expand on those of recent studies across the public sector. Tracking an organization's performance and early diagnosis of performance problems, focusing on performance management systems, and taking into account contextual factors are issues that should be considered.

  6. Heart Failure Due to Age-Related Cardiac Amyloid Disease Associated With Wild-Type Transthyretin: A Prospective, Observational Cohort Study

    PubMed Central

    Connors, Lawreen H.; Sam, Flora; Skinner, Martha; Salinaro, Francesco; Sun, Fangui; Ruberg, Frederick L.; Berk, John L.; Seldin, David C.

    2015-01-01

    Background Heart failure due to wild-type transthyretin amyloidosis (ATTRwt) is an under-appreciated cause of morbidity and mortality in the aging population. The aims of this study were to examine features of disease and characterize outcomes in a large ATTRwt cohort. Methods and Results Over 20 years, 121 patients with ATTRwt were enrolled in a prospective observational study. Median age at enrollment was 75.6 years (range, 62.6–87.8); 97% of patients were Caucasian. The median survival, measured from biopsy diagnosis, was 46.69 months (95% CI, 41.95–56.77); 78% of deaths were due to cardiac causes. By Kaplan-Meier analysis, 5-year survival was 35.7% (95% CI, 25–46). Impaired functional capacity (mean VO2 max of 13.5 mL/kg/min) and atrial fibrillation (67%) were common clinical features. Multivariate predictors of reduced survival were elevated serum brain natriuretic peptide (BNP, 482 ± 337 pg/mL) and uric acid (8.2 ± 2.6 mg/dL), decreased left ventricular ejection fraction (LVEF, 50% median ranging 10-70%), and increased relative wall thickness (RWT, 0.75 ± 0.19). Conclusions In this series of patients with biopsy-proven ATTRwt amyloidosis, poor functional capacity and atrial arrhythmias were common clinical features. Elevated BNP and uric acid, decreased LVEF, and increased RWT were associated with limited survival of only 35.7% at 5 years for the group as a whole. These data establish the natural history of ATTRwt, provide statistical basis for the design of future interventional clinical trials, and highlight the need for more sensitive diagnostic tests and disease-specific treatments for this disease. PMID:26660282

  7. On-Board Failure-Protection Requirements for Railroad-Vehicle Equipment

    DOT National Transportation Integrated Search

    1979-03-01

    An analysis of the 1975 railroad-equipment-caused accidents was made. Data reported to the FRA were the primary source of derailment information; however, data from other sources were also used. Individual cause codes were consolidated into groups wh...

  8. NiCd cell reliability in the mission environment

    NASA Technical Reports Server (NTRS)

    Denson, William K.; Klein, Glenn C.

    1993-01-01

    This paper summarizes an effort by Gates Aerospace Batteries (GAB) and the Reliability Analysis Center (RAC) to analyze survivability data for both General Electric and GAB NiCd cells utilized in various spacecraft. For simplicity sake, all mission environments are described as either low Earth orbital (LEO) or geosynchronous Earth orbit (GEO). 'Extreme value statistical methods' are applied to this database because of the longevity of the numerous missions while encountering relatively few failures. Every attempt was made to include all known instances of cell-induced-failures of the battery and to exclude battery-induced-failures of the cell. While this distinction may be somewhat limited due to availability of in-flight data, we have accepted the learned opinion of the specific customer contacts to ensure integrity of the common databases. This paper advances the preliminary analysis reported upon at the 1991 NASA Battery Workshop. That prior analysis was concerned with an estimated 278 million cell-hours of operation encompassing 183 satellites. The paper also cited 'no reported failures to date.' This analysis reports on 428 million cell hours of operation emcompassing 212 satellites. This analysis also reports on seven 'cell-induced-failures.'

  9. Prophylaxis of Contrast-Induced Nephrotoxicity

    PubMed Central

    2014-01-01

    Contrast-induced nephrotoxicity (CIN) is a form of acute kidney injury that follows intravascular contrast media exposure. CIN may be preventable because its risk factors are well established and the timing of renal insult is commonly known in advance. However, contrast-induced nephrotoxicity is still the third leading cause of iatrogenic renal failure. This important complication accounts up to 10% of acute renal failure cases in hospitalized patients and it is associated with increased short- and long-term morbidity and mortality. Prolonged hospitalization follows and overall increases healthcare resource utilization. This paper will discuss the various prophylactic procedures tested in clinical trials. PMID:24812612

  10. Power Cycle Testing of Power Switches: A Literature Survey

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    GopiReddy, Lakshmi Reddy; Tolbert, Leon M.; Ozpineci, Burak

    Reliability of power converters and lifetime prediction has been a major topic of research in the last few decades, especially for traction applications. The main failures in high power semiconductors are caused by thermomechanical fatigue. Power cycling and temperature cycling are the two most common thermal acceleration tests used in assessing reliability. The objective of this paper is to study the various power cycling tests found in the literature and to develop generalized steps in planning application specific power cycling tests. A comparison of different tests based on the failures, duration, test circuits, and monitored electrical parameters is presented.

  11. Power Cycle Testing of Power Switches: A Literature Survey

    DOE PAGES

    GopiReddy, Lakshmi Reddy; Tolbert, Leon M.; Ozpineci, Burak

    2014-09-18

    Reliability of power converters and lifetime prediction has been a major topic of research in the last few decades, especially for traction applications. The main failures in high power semiconductors are caused by thermomechanical fatigue. Power cycling and temperature cycling are the two most common thermal acceleration tests used in assessing reliability. The objective of this paper is to study the various power cycling tests found in the literature and to develop generalized steps in planning application specific power cycling tests. A comparison of different tests based on the failures, duration, test circuits, and monitored electrical parameters is presented.

  12. The role of erythropoiesis stimulating agents and intravenous (IV) iron in the cardio renal anemia syndrome.

    PubMed

    Silverberg, Donald S

    2011-11-01

    Anemia is common in Congestive Heart Failure (CHF) and is associated with an increased mortality, morbidity and progressive renal failure. The most common causes of the anemia in CHF are (1) the associated Chronic Kidney Disease (CKD), which causes depression of erythropoietin (EPO) production in the kidney, and (2) excessive cytokine production in CHF, which can cause both depression of erythropoietin production in the kidney and depression of erythropoietin response in the bone marrow. The cytokines can also induce iron deficiency by increasing hepcidin production from the liver, which both reduces gastrointestinal iron absorption and reduces iron release from iron stores located in the macrophages and hepatocytes. It appears that iron deficiency is very common in CHF and is rarely recognized or treated. The iron deficiency can cause a thrombocytosis that might contribute to cardiovascular complications in both CHF and CKD and is reversible with iron treatment. Thus, attempts to control this anemia in CHF will have to take into consideration both the use of both Erythropoiesis Stimulating Agents (ESA) such as EPO and oral and, probably more importantly, intravenous (IV) iron. Many studies of anemia in CHF with ESA and oral or IV iron and even with IV iron without ESA have shown a positive effect on hospitalization, New York Heart Association functional class, cardiac and renal function, quality of life, exercise capacity and reduced Beta Natriuretic Peptide and have not demonstrated an increase in cardiovascular damage related to the therapy. However, adequately powered long-term placebo-controlled studies of ESA and of IV iron in CHF are still needed and are currently being carried out.

  13. Mechanism of failure of the Cabrol procedure: A computational fluid dynamic analysis.

    PubMed

    Poullis, M; Pullan, M

    2015-12-01

    Sudden failure of the Cabrol graft is common and frequently fatal. We utilised the technique of computational fluid dynamic (CFD) analysis to evaluate the mechanism of failure and potentially improve on the design of the Cabrol procedure. CFD analysis of the classic Cabrol procedure and a number of its variants was performed. Results from this analysis was utilised to generate further improved geometric options for the Cabrol procedure. These were also subjected to CFD analysis. All current Cabrol and variations of the Cabrol procedure are predicated by CFD analysis to be prone to graft thrombosis, secondary to stasis around the right coronary artery button. The right coronary artery flow characteristics were found to be the dominant reason for Cabrol graft failure. A simple modification of the Cabrol geometry is predicated to virtually eliminate any areas of blood stasis, and graft failure. Modification of the Cabrol graft geometry, due to CFD analysis may help reduce the incidence of graft thrombosis. A C shaped Cabrol graft with the right coronary button anastomosed to its side along its course from the aorta to the left coronary button is predicted to have the least thrombotic tendency. Clinical correlation is needed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Practical, transparent prospective risk analysis for the clinical laboratory.

    PubMed

    Janssens, Pim Mw

    2014-11-01

    Prospective risk analysis (PRA) is an essential element in quality assurance for clinical laboratories. Practical approaches to conducting PRA in laboratories, however, are scarce. On the basis of the classical Failure Mode and Effect Analysis method, an approach to PRA was developed for application to key laboratory processes. First, the separate, major steps of the process under investigation are identified. Scores are then given for the Probability (P) and Consequence (C) of predefined types of failures and the chances of Detecting (D) these failures. Based on the P and C scores (on a 10-point scale), an overall Risk score (R) is calculated. The scores for each process were recorded in a matrix table. Based on predetermined criteria for R and D, it was determined whether a more detailed analysis was required for potential failures and, ultimately, where risk-reducing measures were necessary, if any. As an illustration, this paper presents the results of the application of PRA to our pre-analytical and analytical activities. The highest R scores were obtained in the stat processes, the most common failure type in the collective process steps was 'delayed processing or analysis', the failure type with the highest mean R score was 'inappropriate analysis' and the failure type most frequently rated as suboptimal was 'identification error'. The PRA designed is a useful semi-objective tool to identify process steps with potential failures rated as risky. Its systematic design and convenient output in matrix tables makes it easy to perform, practical and transparent. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  15. Mask_explorer: A tool for exploring brain masks in fMRI group analysis.

    PubMed

    Gajdoš, Martin; Mikl, Michal; Mareček, Radek

    2016-10-01

    Functional magnetic resonance imaging (fMRI) studies of the human brain are appearing in increasing numbers, providing interesting information about this complex system. Unique information about healthy and diseased brains is inferred using many types of experiments and analyses. In order to obtain reliable information, it is necessary to conduct consistent experiments with large samples of subjects and to involve statistical methods to confirm or reject any tested hypotheses. Group analysis is performed for all voxels within a group mask, i.e. a common space where all of the involved subjects contribute information. To our knowledge, a user-friendly interface with the ability to visualize subject-specific details in a common analysis space did not yet exist. The purpose of our work is to develop and present such interface. Several pitfalls have to be avoided while preparing fMRI data for group analysis. One such pitfall is spurious non-detection, caused by inferring conclusions in the volume of a group mask that has been corrupted due to a preprocessing failure. We describe a MATLAB toolbox, called the mask_explorer, designed for prevention of this pitfall. The mask_explorer uses a graphical user interface, enables a user-friendly exploration of subject masks and is freely available. It is able to compute subject masks from raw data and create lists of subjects with potentially problematic data. It runs under MATLAB with the widely used SPM toolbox. Moreover, we present several practical examples where the mask_explorer is usefully applied. The mask_explorer is designed to quickly control the quality of the group fMRI analysis volume and to identify specific failures related to preprocessing steps and acquisition. It helps researchers detect subjects with potentially problematic data and consequently enables inspection of the data. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  16. In-Hospital Diuretic Agent Use and Post-Discharge Clinical Outcomes in Patients Hospitalized for Worsening Heart Failure: Insights From the EVEREST Trial.

    PubMed

    Mecklai, Alicia; Subačius, Haris; Konstam, Marvin A; Gheorghiade, Mihai; Butler, Javed; Ambrosy, Andrew P; Katz, Stuart D

    2016-07-01

    The aim of this study was to characterize the association between decongestion therapy and 30-day outcomes in patients hospitalized for heart failure (HF). Loop diuretic agents are commonly prescribed for the treatment of symptomatic congestion in patients hospitalized for HF, but the association between loop diuretic agent dose response and post-discharge outcomes has not been well characterized. Cox proportional hazards models were used to estimate the association among average loop diuretic agent dose, congestion status at discharge, and 30-day post-discharge all-cause mortality and HF rehospitalization in 3,037 subjects hospitalized with worsening HF enrolled in the EVEREST (Efficacy of Vasopressin Antagonism in Heart Failure: Outcome Study With Tolvaptan) study. In univariate analysis, subjects exposed to high-dose diuretic agents (≥160 mg/day) had greater risk for the combined outcome than subjects exposed to low-dose diuretic agents (18.9% vs. 10.0%; hazard ratio: 2.00; 95% confidence interval: 1.64 to 2.46; p < 0.0001). After adjustment for pre-specified covariates of disease severity, the association between diuretic agent dose and outcomes was not significant (hazard ratio: 1.11; 95% confidence interval: 0.89 to 1.38; p = 0.35). Of the 3,011 subjects with clinical assessments of volume status, 2,063 (69%) had little or no congestion at hospital discharge. Congestion status at hospital discharge did not modify the association between diuretic agent exposure and the combined endpoint (p for interaction = 0.84). Short-term diuretic agent exposure during hospital treatment for worsening HF was not an independent predictor of 30-day all-cause mortality and HF rehospitalization in multivariate analysis. Congestion status at discharge did not modify the association between diuretic agent dose and clinical outcomes. Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  17. New Medications for Heart Failure

    PubMed Central

    Gordin, Jonathan S.; Fonarow, Gregg C.

    2016-01-01

    Heart failure is common and results in substantial morbidity and mortality. Current guideline-based therapies for heart failure with reduced ejection fraction, including beta-blockers, angiotensin converting enzyme (ACE) inhibitors, and aldosterone antagonists aim to interrupt deleterious neurohormonal pathways and have shown significant success in reducing morbidity and mortality associated with heart failure. Continued efforts to further improve outcomes in patients with heart failure with reduced ejection fraction have led to the first new-in-class medications approved for heart failure since 2005, ivabradine and sacubitril/valsartan. Ivabradine targets the If channels in the sinoatrial node of the heart, decreasing heart rate. Sacubitril/valsartan combines a neprilysin inhibitor that increases levels of beneficial vasodilatory peptides with an angiotensin receptor antagonist. On a background of previously approved, guideline-directed medical therapies for heart failure, these medications have shown improved clinical outcomes ranging from decreased hospitalizations in a select group of patients to a reduction in all-cause mortality across all pre-specified subgroups. In this review, we will discuss the previously established guideline-directed medical therapies for heart failure with reduced ejection fraction, the translational research that led to the development of these new therapies, and the results from the major clinical trials of ivabradine and sacubitril/valsartan. PMID:27038558

  18. Pulmonary hypertension and right heart failure due to severe hypernatremic dehydration.

    PubMed

    Chiwane, Saurabh; Ahmed, Tageldin M; Bauerfeld, Christian P; Chauhan, Monika

    2017-07-01

    Neonates are at risk of developing hypernatremic dehydration and its associated complications, such as stroke, dural sinus thrombosis and renal vein thrombosis. Pulmonary hypertension has not been described as a complication of hypernatremia. We report a case of a seven-day-old neonate with severe hypernatremic dehydration who went on to develop pulmonary hypertension and right heart failure needing extracorporeal membrane oxygenation (ECMO). Normal or high anion gap metabolic acidosis commonly accompanies hypernatremic dehydration. The presence of acidosis and/or hypoxia can delay the normal drop in pulmonary vascular resistance (PVR) after birth, causing pulmonary hypertension and right ventricular failure. A high index of suspicion is paramount to diagnose pulmonary hypertension and aggressive correction of the acidosis and hypoxia is needed. In the presence of severe right ventricular failure, ECMO can be used as a bridge to recovery while underlying metabolic derangements are being corrected.

  19. Patient Characteristics Predicting Readmission Among Individuals Hospitalized for Heart Failure.

    PubMed

    O'Connor, Melissa; Murtaugh, Christopher M; Shah, Shivani; Barrón-Vaya, Yolanda; Bowles, Kathryn H; Peng, Timothy R; Zhu, Carolyn W; Feldman, Penny H

    2016-02-01

    Heart failure is difficult to manage and increasingly common with many individuals experiencing frequent hospitalizations. Little is known about patient factors consistently associated with hospital readmission. A literature review was conducted to identify heart failure patient characteristics, measured before discharge, that contribute to variation in hospital readmission rates. Database searches yielded 950 potential articles, of which 34 studies met inclusion criteria. Patient characteristics generally have a very modest effect on all-cause or heart failure-related readmission within 7 to 180 days of index hospital discharge. A range of cardiac diseases and other comorbidities only minimally increase readmission rates. No single patient characteristic stands out as a key contributor across multiple studies underscoring the challenge of developing successful interventions to reduce readmissions. Interventions may need to be general in design with the specific intervention depending on each patient's unique clinical profile. © The Author(s) 2015.

  20. Recognizing Student Fear: The Elephant in the Classroom

    ERIC Educational Resources Information Center

    Bledsoe, T. Scott; Baskin, Janice J.

    2014-01-01

    Understanding fear, its causes, and its impact on students can be important for educators who seek ways to help students manage their fears. This paper explores common types of student fears such as performance-based anxiety, fear of failure, fear of being laughed at, and cultural components of fear that impact learning. The cognitive, emotional,…

  1. Effect of seedbed condition on regeneration of Virginia pine after logging

    Treesearch

    Edward T. Sucoff

    1961-01-01

    When stands of Virginia pine (Pinus virginiana ill.) are cut according to usual practices, and no specific action is taken to control subsequent regeneration, the pine often fails to reproduce. A common cause for failure is an unfavorable seedbed condition: logging leaves much of the seedbed undisturbed, and some areas that are disturbed are covered...

  2. Reliability analysis of the F-8 digital fly-by-wire system

    NASA Technical Reports Server (NTRS)

    Brock, L. D.; Goodman, H. A.

    1981-01-01

    The F-8 Digital Fly-by-Wire (DFBW) flight test program intended to provide the technology for advanced control systems, giving aircraft enhanced performance and operational capability is addressed. A detailed analysis of the experimental system was performed to estimated the probabilities of two significant safety critical events: (1) loss of primary flight control function, causing reversion to the analog bypass system; and (2) loss of the aircraft due to failure of the electronic flight control system. The analysis covers appraisal of risks due to random equipment failure, generic faults in design of the system or its software, and induced failure due to external events. A unique diagrammatic technique was developed which details the combinatorial reliability equations for the entire system, promotes understanding of system failure characteristics, and identifies the most likely failure modes. The technique provides a systematic method of applying basic probability equations and is augmented by a computer program written in a modular fashion that duplicates the structure of these equations.

  3. Cardio-oncology: cardiovascular complications of cancer therapy.

    PubMed

    Henning, Robert J; Harbison, Raymond D

    2017-07-01

    This paper focuses on three classes of commonly used anticancer drugs, which can cause cardiotoxicity: anthracyclines, monoclonal antibodies exemplified by trastuzumab and tyrosine kinase inhibitors. Anthracyclines can induce cardiomyocyte necrosis and fibrosis. Trastuzumab can cause cardiac stunning. The tyrosine kinase inhibitors can increase systemic arterial pressure and impair myocyte contractility. In addition, radiation therapy to the mediastinum or left chest can exacerbate the cardiotoxicity of these anticancer drugs and can also cause accelerated atherosclerosis, myocardial infarction, heart failure and arrhythmias. Left ventricular ejection fraction measurements are most commonly used to assess cardiac function in patients who receive chemo- or radiation-therapy. However, echocardiographic determinations of global longitudinal strain are more sensitive for detection of early left ventricular systolic dysfunction. Information on patient-risk stratification and monitoring is presented and guidelines for the medical treatment of cardiac dysfunction due to cancer therapies are summarized.

  4. TU-AB-BRD-02: Failure Modes and Effects Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Huq, M.

    2015-06-15

    Current quality assurance and quality management guidelines provided by various professional organizations are prescriptive in nature, focusing principally on performance characteristics of planning and delivery devices. However, published analyses of events in radiation therapy show that most events are often caused by flaws in clinical processes rather than by device failures. This suggests the need for the development of a quality management program that is based on integrated approaches to process and equipment quality assurance. Industrial engineers have developed various risk assessment tools that are used to identify and eliminate potential failures from a system or a process before amore » failure impacts a customer. These tools include, but are not limited to, process mapping, failure modes and effects analysis, fault tree analysis. Task Group 100 of the American Association of Physicists in Medicine has developed these tools and used them to formulate an example risk-based quality management program for intensity-modulated radiotherapy. This is a prospective risk assessment approach that analyzes potential error pathways inherent in a clinical process and then ranks them according to relative risk, typically before implementation, followed by the design of a new process or modification of the existing process. Appropriate controls are then put in place to ensure that failures are less likely to occur and, if they do, they will more likely be detected before they propagate through the process, compromising treatment outcome and causing harm to the patient. Such a prospective approach forms the basis of the work of Task Group 100 that has recently been approved by the AAPM. This session will be devoted to a discussion of these tools and practical examples of how these tools can be used in a given radiotherapy clinic to develop a risk based quality management program. Learning Objectives: Learn how to design a process map for a radiotherapy process Learn how to perform failure modes and effects analysis analysis for a given process Learn what fault trees are all about Learn how to design a quality management program based upon the information obtained from process mapping, failure modes and effects analysis and fault tree analysis. Dunscombe: Director, TreatSafely, LLC and Center for the Assessment of Radiological Sciences; Consultant to IAEA and Varian Thomadsen: President, Center for the Assessment of Radiological Sciences Palta: Vice President of the Center for the Assessment of Radiological Sciences.« less

  5. WE-H-BRC-01: Failure Mode and Effects Analysis of Skin Electronic Brachytherapy Using Esteya Unit

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ibanez-Rosello, B; Bautista-Ballesteros, J; Bonaque, J

    Purpose: A failure mode and effect analysis (FMEA) of skin lesions treatment process using Esteya™ device (Elekta Brachyterapy, Veenendaal, The Netherlands) was performed, with the aim of increasing the quality of the treatment and reducing the likelihood of unwanted events. Methods: A multidisciplinary team with experience in the treatment process met to establish the process map, which outlines the flow of various stages for such patients undergoing skin treatment. Potential failure modes (FM) were identified and the value of severity (S), frequency of occurrence (O), and lack of detectability (D) of the proposed FM were scored individually, each on amore » scale of 1 to 10 following TG-100 guidelines of the AAPM. These failure modes were ranked according to our risk priority number (RPN) and S scores. The efficiency of existing quality management tools was analyzed through a reassessment of the O and D made by consensus. Results: 149 FM were identified, 43 of which had RPN ≥ 100 and 30 had S ≥ 7. After introduction of the tools of quality management, only 3 FM had RPN ≥ 100 and 22 FM had RPN ≥ 50. These 22 FM were thoroughly analyzed and new tools for quality management were proposed. The most common cause of highest RPN FM was associated with the heavy patient workload and the continuous and accurate applicator-patient skin contact during the treatment. To overcome this second item, a regular quality control and setup review by a second individual before each treatment session was proposed. Conclusion: FMEA revealed some of the FM potentials that were not predicted during the initial implementation of the quality management tools. This exercise was useful in identifying the need of periodic update of the FMEA process as new potential failures can be identified.« less

  6. Chronic acetaminophen ingestion resulting in severe anion gap metabolic acidosis secondary to 5-oxoproline accumulation: an under diagnosed phenomenon.

    PubMed

    O'Brien, L Morgan Nordstrom; Hooper, Michael; Flemmer, Mark; Marik, Paul Ellis

    2012-07-03

    Anion gap metabolic acidosis is commonly caused by lactic acidosis, ketoacidosis, and ingestion of methanol, salicylates, ethylene glycol or accumulation of organic/inorganic acids. However, rare causes of metabolic acidosis from enzyme defects, such as disturbances in the γ-glutamyl cycle, are being reported in higher frequencies in the adult population. Such disturbances cause an accumulation of 5-oxoproline and ultimately an anion gap metabolic acidosis. These disturbances are often associated with acetaminophen in the setting of certain risk factors such as sepsis, malnutrition, liver disease, female gender, pregnancy or renal failure.

  7. The struggling student: a thematic analysis from the self-regulated learning perspective.

    PubMed

    Patel, Rakesh; Tarrant, Carolyn; Bonas, Sheila; Yates, Janet; Sandars, John

    2015-04-01

    Students who engage in self-regulated learning (SRL) are more likely to achieve academic success compared with students who have deficits in SRL and tend to struggle with academic performance. Understanding how poor SRL affects the response to failure at assessment will inform the development of better remediation. Semi-structured interviews were conducted with 55 students who had failed the final re-sit assessment at two medical schools in the UK to explore their use of SRL processes. A thematic analysis approach was used to identify the factors, from an SRL perspective, that prevented students from appropriately and adaptively overcoming failure, and confined them to a cycle of recurrent failure. Struggling students did not utilise key SRL processes, which caused them to make inappropriate choices of learning strategies for written and clinical formats of assessment, and to use maladaptive strategies for coping with failure. Their normalisation of the experience and external attribution of failure represented barriers to their taking up of formal support and seeking informal help from peers. This study identified that struggling students had problems with SRL, which caused them to enter a cycle of failure as a result of their limited attempts to access formal and informal support. Implications for how medical schools can create a culture that supports the seeking of help and the development of SRL, and improves remediation for struggling students, are discussed. © 2015 John Wiley & Sons Ltd.

  8. An XRCC4 Splice Mutation Associated With Severe Short Stature, Gonadal Failure, and Early-Onset Metabolic Syndrome

    PubMed Central

    de Bruin, Christiaan; Mericq, Verónica; Andrew, Shayne F.; van Duyvenvoorde, Hermine A.; Verkaik, Nicole S.; Losekoot, Monique; Porollo, Aleksey; Garcia, Hernán; Kuang, Yi; Hanson, Dan; Clayton, Peter; van Gent, Dik C.; Wit, Jan M.; Hwa, Vivian

    2015-01-01

    Context: Severe short stature can be caused by defects in numerous biological processes including defects in IGF-1 signaling, centromere function, cell cycle control, and DNA damage repair. Many syndromic causes of short stature are associated with medical comorbidities including hypogonadism and microcephaly. Objective: To identify an underlying genetic etiology in two siblings with severe short stature and gonadal failure. Design: Clinical phenotyping, genetic analysis, complemented by in vitro functional studies of the candidate gene. Setting: An academic pediatric endocrinology clinic. Patients or Other Participants: Two adult siblings (male patient [P1] and female patient 2 [P2]) presented with a history of severe postnatal growth failure (adult heights: P1, −6.8 SD score; P2, −4 SD score), microcephaly, primary gonadal failure, and early-onset metabolic syndrome in late adolescence. In addition, P2 developed a malignant gastrointestinal stromal tumor at age 28. Intervention(s): Single nucleotide polymorphism microarray and exome sequencing. Results: Combined microarray analysis and whole exome sequencing of the two affected siblings and one unaffected sister identified a homozygous variant in XRCC4 as the probable candidate variant. Sanger sequencing and mRNA studies revealed a splice variant resulting in an in-frame deletion of 23 amino acids. Primary fibroblasts (P1) showed a DNA damage repair defect. Conclusions: In this study we have identified a novel pathogenic variant in XRCC4, a gene that plays a critical role in non-homologous end-joining DNA repair. This finding expands the spectrum of DNA damage repair syndromes to include XRCC4 deficiency causing severe postnatal growth failure, microcephaly, gonadal failure, metabolic syndrome, and possibly tumor predisposition. PMID:25742519

  9. Revision surgery for failed thermal capsulorrhaphy.

    PubMed

    Park, Hyung Bin; Yokota, Atsushi; Gill, Harpreet S; El Rassi, George; McFarland, Edward G

    2005-09-01

    With the failure of thermal capsulorrhaphy for shoulder instability, there have been concerns with capsular thinning and capsular necrosis affecting revision surgery. To report the findings at revision surgery for failed thermal capsulorrhaphy and to evaluate the technical effects on subsequent revision capsular plication. Case series; Level of evidence, 4. Fourteen patients underwent arthroscopic evaluation and open reconstruction for a failed thermal capsulorrhaphy. The cause of the failure, the quality of the capsule, and the ability to suture the capsule were recorded. The patients were evaluated at follow-up for failure, which was defined as recurrent subluxations or dislocations. The origin of the instability was traumatic (n = 6) or atraumatic (n = 8). At revision surgery in the traumatic group, 4 patients sustained failure of the Bankart repair with capsular laxity, and the others experienced capsular laxity alone. In the atraumatic group, all patients experienced capsular laxity as the cause of failure. Of the 14 patients, the capsule quality was judged to be thin in 5 patients and ablated in 1 patient. A glenoid-based capsular shift could be accomplished in all 14 patients. At follow-up (mean, 35.4 months; range, 22 to 48 months), 1 patient underwent revision surgery and 1 patient had a subluxation, resulting in a failure rate of 14%. Recurrent capsular laxity after failed thermal capsular shrinkage is common and frequently associated with capsular thinning. In most instances, the capsule quality does not appear to technically affect the revision procedure.

  10. Prognostic Impact of Diabetes and Prediabetes on Survival Outcomes in Patients With Chronic Heart Failure: A Post-Hoc Analysis of the GISSI-HF (Gruppo Italiano per lo Studio della Sopravvivenza nella Insufficienza Cardiaca-Heart Failure) Trial.

    PubMed

    Dauriz, Marco; Targher, Giovanni; Temporelli, Pier Luigi; Lucci, Donata; Gonzini, Lucio; Nicolosi, Gian Luigi; Marchioli, Roberto; Tognoni, Gianni; Latini, Roberto; Cosmi, Franco; Tavazzi, Luigi; Maggioni, Aldo Pietro

    2017-07-05

    The independent prognostic impact of diabetes mellitus (DM) and prediabetes mellitus (pre-DM) on survival outcomes in patients with chronic heart failure has been investigated in observational registries and randomized, clinical trials, but the results have been often inconclusive or conflicting. We examined the independent prognostic impact of DM and pre-DM on survival outcomes in the GISSI-HF (Gruppo Italiano per lo Studio della Sopravvivenza nella Insufficienza Cardiaca-Heart Failure) trial. We assessed the risk of all-cause death and the composite of all-cause death or cardiovascular hospitalization over a median follow-up period of 3.9 years among the 6935 chronic heart failure participants of the GISSI-HF trial, who were stratified by presence of DM (n=2852), pre-DM (n=2013), and non-DM (n=2070) at baseline. Compared with non-DM patients, those with DM had remarkably higher incidence rates of all-cause death (34.5% versus 24.6%) and the composite end point (63.6% versus 54.7%). Conversely, both event rates were similar between non-DM patients and those with pre-DM. Cox regression analysis showed that DM, but not pre-DM, was associated with an increased risk of all-cause death (adjusted hazard ratio, 1.43; 95% CI, 1.28-1.60) and of the composite end point (adjusted hazard ratio, 1.23; 95% CI, 1.13-1.32), independently of established risk factors. In the DM subgroup, higher hemoglobin A1c was also independently associated with increased risk of both study outcomes (all-cause death: adjusted hazard ratio, 1.21; 95% CI, 1.02-1.43; and composite end point: adjusted hazard ratio, 1.14; 95% CI, 1.01-1.29, respectively). Presence of DM was independently associated with poor long-term survival outcomes in patients with chronic heart failure. URL: http://www.clinicaltrials.gov. Unique identifier: NCT00336336. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

  11. Analysis on Dangerous Source of Large Safety Accident in Storage Tank Area

    NASA Astrophysics Data System (ADS)

    Wang, Tong; Li, Ying; Xie, Tiansheng; Liu, Yu; Zhu, Xueyuan

    2018-01-01

    The difference between a large safety accident and a general accident is that the consequences of a large safety accident are particularly serious. To study the tank area which factors directly or indirectly lead to the occurrence of large-sized safety accidents. According to the three kinds of hazard source theory and the consequence cause analysis of the super safety accident, this paper analyzes the dangerous source of the super safety accident in the tank area from four aspects, such as energy source, large-sized safety accident reason, management missing, environmental impact Based on the analysis of three kinds of hazard sources and environmental analysis to derive the main risk factors and the AHP evaluation model is established, and after rigorous and scientific calculation, the weights of the related factors in four kinds of risk factors and each type of risk factors are obtained. The result of analytic hierarchy process shows that management reasons is the most important one, and then the environmental factors and the direct cause and Energy source. It should be noted that although the direct cause is relatively low overall importance, the direct cause of Failure of emergency measures and Failure of prevention and control facilities in greater weight.

  12. [Non-surgical management after blunt traumatic liver injuries: A review article].

    PubMed

    Noyola-Villalobos, Héctor Faustino; Loera-Torres, Marco Antonio; Jiménez-Chavarría, Enrique; Núñez-Cantú, Olliver; García-Núñez, Luis Manuel; Arcaute-Velázquez, Fernando Federico

    2016-01-01

    Hepatic trauma is a common cause for admissions in the Emergency Room. Currently, non-surgical management is the standard treatment in haemodynamically stable patients with a success rate of around 85 to 98%. This haemodynamic stability is the most important factor in selecting the appropriate patient. Adjuncts in non-surgical management are angioembolisation, image-guided drainage and endoscopic retrograde cholangiopancreatography. Failure in non-surgical management is relatively rare but potentially fatal, and needs to be recognised and aggressively treated as early as possible. The main cause of failure in non-surgical management is persistent haemorrhage. The aim of this paper is to describe current evidence and guidelines that support non-surgical management of liver injuries in blunt trauma. Copyright © 2016 Academia Mexicana de Cirugía A.C. Published by Masson Doyma México S.A. All rights reserved.

  13. Research on the fragment impact resistance of a composite mast

    NASA Astrophysics Data System (ADS)

    Zhang, Wei; Wu, Chao; Yang, Wenshan; Xu, Shanshan; Ren, Shaofei

    2011-09-01

    Due to the unique structural mode and material property of a composite sandwich plate, related research such as fragment impact resistance of a composite mast is short of publication and urgent in this field. In this paper, the commonly accepted sandwich core board theory was modified. Damage caused by a fragment attack was simulated onto a sandwich plate model built with solid and shell elements. It was shown that shear failure and vast matrix cracking are the main reasons for outer coat damage, and tension failure and partial matrix cracking are the cause for inner coat damage. Additionally, according to complexities in actual sea battles, different work conditions of missile attacks were set. Ballistic limit values of different fragment sizes were also obtained, which provides references for enhancing the fragment impact resistance of a composite mast.

  14. European external quality control study on the competence of laboratories to recognize rare sequence variants resulting in unusual genotyping results.

    PubMed

    Márki-Zay, János; Klein, Christoph L; Gancberg, David; Schimmel, Heinz G; Dux, László

    2009-04-01

    Depending on the method used, rare sequence variants adjacent to the single nucleotide polymorphism (SNP) of interest may cause unusual or erroneous genotyping results. Because such rare variants are known for many genes commonly tested in diagnostic laboratories, we organized a proficiency study to assess their influence on the accuracy of reported laboratory results. Four external quality control materials were processed and sent to 283 laboratories through 3 EQA organizers for analysis of the prothrombin 20210G>A mutation. Two of these quality control materials contained sequence variants introduced by site-directed mutagenesis. One hundred eighty-nine laboratories participated in the study. When samples gave a usual result with the method applied, the error rate was 5.1%. Detailed analysis showed that more than 70% of the failures were reported from only 9 laboratories. Allele-specific amplification-based PCR had a much higher error rate than other methods (18.3% vs 2.9%). The variants 20209C>T and [20175T>G; 20179_20180delAC] resulted in unusual genotyping results in 67 and 85 laboratories, respectively. Eighty-three (54.6%) of these unusual results were not recognized, 32 (21.1%) were attributed to technical issues, and only 37 (24.3%) were recognized as another sequence variant. Our findings revealed that some of the participating laboratories were not able to recognize and correctly interpret unusual genotyping results caused by rare SNPs. Our study indicates that the majority of the failures could be avoided by improved training and careful selection and validation of the methods applied.

  15. [Analysis of the failures of a cemented constrained liner model in patients with a high dislocation risk].

    PubMed

    Gallart, X; Gomez, J C; Fernández-Valencia, J A; Combalía, A; Bori, G; García, S; Rios, J; Riba, J

    2014-01-01

    To evaluate the short-term results of an ultra high molecular weight polyethylene retentive cup in patients at high risk of dislocation, either primary or revision surgery. Retrospective review of 38 cases in order to determine the rate of survival and failure analysis of a constrained cemented cup, with a mean follow-up of 27 months. We studied demographic data, complications, especially re-dislocations of the prosthesis and, also the likely causes of system failure analyzed. In 21.05% (8 cases) were primary surgery and 78.95% were revision surgery (30 cases). The overall survival rate by Kaplan-Meier method was 70.7 months. During follow-up 3 patients died due to causes unrelated to surgery and 2 infections occurred. 12 hips had at least two previous surgeries done. It wasn't any case of aseptic loosening. Four patients presented dislocation, all with a 22 mm head (P=.008). Our statistical analysis didn't found relationship between the abduction cup angle and implant failure (P=.22). The ultra high molecular weight polyethylene retentive cup evaluated in this series has provided satisfactory short-term results in hip arthroplasty patients at high risk of dislocation. Copyright © 2014 SECOT. Published by Elsevier Espana. All rights reserved.

  16. A Case Study on Engineering Failure Analysis of Link Chain

    PubMed Central

    Lee, Seong-Beom; Lee, Hong-Chul

    2010-01-01

    Objectives The objective of this study was to investigate the effect of chain installation condition on stress distribution that could eventually cause disastrous failure from sudden deformation and geometric rupture. Methods Fractographic method used for the failed chain indicates that over-stress was considered as the root cause of failure. 3D modeling and finite element analysis for the chain, used in a crane hook, were performed with a three-dimensional interactive application program, CATIA, commercial finite element analysis and computational fluid dynamic software, ANSYS. Results The results showed that the state of stress was changed depending on the initial position of the chain that was installed in the hook. Especially, the magnitude of the stress was strongly affected by the bending forces, which are 2.5 times greater (under the simulation condition currently investigated) than that from the plain tensile load. Also, it was noted that the change of load state is strongly related to the failure of parts. The chain can hold an ultimate load of about 8 tons with only the tensile load acting on it. Conclusion The conclusions of this research clearly showed that a reduction of the loss from similar incidents can be achieved when an operator properly handles the installation of the chain. PMID:22953162

  17. Analysis of Rail Vehicle Suspension Spring with Special Emphasis on Curving, Tracking and Tractive Efforts

    NASA Astrophysics Data System (ADS)

    Kumbhalkar, M. A.; Bhope, D. V.; Vanalkar, A. V.

    2016-09-01

    The dynamics of the rail vehicle represents a balance between the forces acting between wheel and rail, the inertia forces and the forces exerted by suspension and articulation. Axial loading on helical spring causes vertical deflection at straight track but failures calls to investigate for lateral and longitudinal loading at horizontal and vertical curves respectively. Goods carrying vehicle has the frequent failures of middle axle inner suspension spring calls for investigation. The springs are analyzed for effect of stress concentration due to centripetal force and due to tractive and breaking effort. This paper also discusses shear failure analysis of spring at curvature and at uphill at various speeds for different loading condition analytically and by finite element analysis. Two mass rail vehicle suspension systems have been analyzed for vibration responses analytically using mathematical tool Matlab Simulink and the same will be evaluated using FFT vibration analyzer to find peak resonance in vertical, lateral and longitudinal direction. The results prove that the suspension acquires high repeated load in vertical and lateral direction due to tracking and curving causes maximum stress concentration on middle axle suspension spring as height of this spring is larger than end axle spring in primary suspension system and responsible for failure of middle axle suspension spring due to high stress acquisition.

  18. A mid-layer model for human reliability analysis : understanding the cognitive causes of human failure events.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shen, Song-Hua; Chang, James Y. H.; Boring,Ronald L.

    2010-03-01

    The Office of Nuclear Regulatory Research (RES) at the US Nuclear Regulatory Commission (USNRC) is sponsoring work in response to a Staff Requirements Memorandum (SRM) directing an effort to establish a single human reliability analysis (HRA) method for the agency or guidance for the use of multiple methods. As part of this effort an attempt to develop a comprehensive HRA qualitative approach is being pursued. This paper presents a draft of the method's middle layer, a part of the qualitative analysis phase that links failure mechanisms to performance shaping factors. Starting with a Crew Response Tree (CRT) that has identifiedmore » human failure events, analysts identify potential failure mechanisms using the mid-layer model. The mid-layer model presented in this paper traces the identification of the failure mechanisms using the Information-Diagnosis/Decision-Action (IDA) model and cognitive models from the psychological literature. Each failure mechanism is grouped according to a phase of IDA. Under each phase of IDA, the cognitive models help identify the relevant performance shaping factors for the failure mechanism. The use of IDA and cognitive models can be traced through fault trees, which provide a detailed complement to the CRT.« less

  19. Analysis of the STS-126 Flow Control Valve Structural-Acoustic Coupling Failure

    NASA Technical Reports Server (NTRS)

    Jones, Trevor M.; Larko, Jeffrey M.; McNelis, Mark E.

    2010-01-01

    During the Space Transportation System mission STS-126, one of the main engine's flow control valves incurred an unexpected failure. A section of the valve broke off during liftoff. It is theorized that an acoustic mode of the flowing fuel, coupled with a structural mode of the valve, causing a high cycle fatigue failure. This report documents the analysis efforts conducted in an attempt to verify this theory. Hand calculations, computational fluid dynamics, and finite element methods are all implemented and analyses are performed using steady-state methods in addition to transient analysis methods. The conclusion of the analyses is that there is a critical acoustic mode that aligns with a structural mode of the valve

  20. Effect of Preconditioning and Soldering on Failures of Chip Tantalum Capacitors

    NASA Technical Reports Server (NTRS)

    Teverovsky, Alexander A.

    2014-01-01

    Soldering of molded case tantalum capacitors can result in damage to Ta205 dielectric and first turn-on failures due to thermo-mechanical stresses caused by CTE mismatch between materials used in the capacitors. It is also known that presence of moisture might cause damage to plastic cases due to the pop-corning effect. However, there are only scarce literature data on the effect of moisture content on the probability of post-soldering electrical failures. In this work, that is based on a case history, different groups of similar types of CWR tantalum capacitors from two lots were prepared for soldering by bake, moisture saturation, and longterm storage at room conditions. Results of the testing showed that both factors: initial quality of the lot, and preconditioning affect the probability of failures. Baking before soldering was shown to be effective to prevent failures even in lots susceptible to pop-corning damage. Mechanism of failures is discussed and recommendations for pre-soldering bake are suggested based on analysis of moisture characteristics of materials used in the capacitors' design.

  1. Use of histamine H2 receptor antagonists and outcomes in patients with heart failure: a nationwide population-based cohort study.

    PubMed

    Adelborg, Kasper; Sundbøll, Jens; Schmidt, Morten; Bøtker, Hans Erik; Weiss, Noel S; Pedersen, Lars; Sørensen, Henrik Toft

    2018-01-01

    Histamine H 2 receptor activation promotes cardiac fibrosis and apoptosis in mice. However, the potential effectiveness of histamine H 2 receptor antagonists (H2RAs) in humans with heart failure is largely unknown. We examined the association between H2RA initiation and all-cause mortality among patients with heart failure. Using Danish medical registries, we conducted a nationwide population-based active-comparator cohort study of new users of H2RAs and proton pump inhibitors (PPIs) after first-time hospitalization for heart failure during the period 1995-2014. Hazard ratios (HRs) for all-cause mortality and hospitalization due to worsening of heart failure, adjusting for age, sex, and time between heart failure diagnosis and initiation of PPI or H2RA therapy, index year, comorbidity, cardiac surgery, comedications, and socioeconomic status were computed based on Cox regression analysis. Our analysis included 42,902 PPI initiators (median age 78 years, 46% female) and 3,296 H2RA initiators (median age 76 years, 48% female). Mortality risk was lower among H2RA initiators than PPI initiators after 1 year (26% vs 31%) and 5 years (60% vs 66%). In multivariable analyses, the 1-year HR was 0.80 (95% CI, 0.74-0.86) and the 5-year HR was 0.85 (95% CI, 0.80-0.89). These findings were consistent after propensity score matching and for ischemic and nonischemic heart failure, as for sex and age groups. The rate of hospitalization due to worsening of heart failure was lower among H2RA initiators than PPI initiators. In patients with heart failure, H2RA initiation was associated with 15%-20% lower mortality than PPI initiation.

  2. All-inkjet-printed thin-film transistors: manufacturing process reliability by root cause analysis

    PubMed Central

    Sowade, Enrico; Ramon, Eloi; Mitra, Kalyan Yoti; Martínez-Domingo, Carme; Pedró, Marta; Pallarès, Jofre; Loffredo, Fausta; Villani, Fulvia; Gomes, Henrique L.; Terés, Lluís; Baumann, Reinhard R.

    2016-01-01

    We report on the detailed electrical investigation of all-inkjet-printed thin-film transistor (TFT) arrays focusing on TFT failures and their origins. The TFT arrays were manufactured on flexible polymer substrates in ambient condition without the need for cleanroom environment or inert atmosphere and at a maximum temperature of 150 °C. Alternative manufacturing processes for electronic devices such as inkjet printing suffer from lower accuracy compared to traditional microelectronic manufacturing methods. Furthermore, usually printing methods do not allow the manufacturing of electronic devices with high yield (high number of functional devices). In general, the manufacturing yield is much lower compared to the established conventional manufacturing methods based on lithography. Thus, the focus of this contribution is set on a comprehensive analysis of defective TFTs printed by inkjet technology. Based on root cause analysis, we present the defects by developing failure categories and discuss the reasons for the defects. This procedure identifies failure origins and allows the optimization of the manufacturing resulting finally to a yield improvement. PMID:27649784

  3. Comprehensive, Quantitative Risk Assessment of CO{sub 2} Geologic Sequestration

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lepinski, James

    2013-09-30

    A Quantitative Failure Modes and Effects Analysis (QFMEA) was developed to conduct comprehensive, quantitative risk assessments on CO{sub 2} capture, transportation, and sequestration or use in deep saline aquifers, enhanced oil recovery operations, or enhanced coal bed methane operations. The model identifies and characterizes potential risks; identifies the likely failure modes, causes, effects and methods of detection; lists possible risk prevention and risk mitigation steps; estimates potential damage recovery costs, mitigation costs and costs savings resulting from mitigation; and ranks (prioritizes) risks according to the probability of failure, the severity of failure, the difficulty of early failure detection and themore » potential for fatalities. The QFMEA model generates the necessary information needed for effective project risk management. Diverse project information can be integrated into a concise, common format that allows comprehensive, quantitative analysis, by a cross-functional team of experts, to determine: What can possibly go wrong? How much will damage recovery cost? How can it be prevented or mitigated? What is the cost savings or benefit of prevention or mitigation? Which risks should be given highest priority for resolution? The QFMEA model can be tailored to specific projects and is applicable to new projects as well as mature projects. The model can be revised and updated as new information comes available. It accepts input from multiple sources, such as literature searches, site characterization, field data, computer simulations, analogues, process influence diagrams, probability density functions, financial analysis models, cost factors, and heuristic best practices manuals, and converts the information into a standardized format in an Excel spreadsheet. Process influence diagrams, geologic models, financial models, cost factors and an insurance schedule were developed to support the QFMEA model. Comprehensive, quantitative risk assessments were conducted on three (3) sites using the QFMEA model: (1) SACROC Northern Platform CO{sub 2}-EOR Site in the Permian Basin, Scurry County, TX, (2) Pump Canyon CO{sub 2}-ECBM Site in the San Juan Basin, San Juan County, NM, and (3) Farnsworth Unit CO{sub 2}-EOR Site in the Anadarko Basin, Ochiltree County, TX. The sites were sufficiently different from each other to test the robustness of the QFMEA model.« less

  4. A diagnosis system using object-oriented fault tree models

    NASA Technical Reports Server (NTRS)

    Iverson, David L.; Patterson-Hine, F. A.

    1990-01-01

    Spaceborne computing systems must provide reliable, continuous operation for extended periods. Due to weight, power, and volume constraints, these systems must manage resources very effectively. A fault diagnosis algorithm is described which enables fast and flexible diagnoses in the dynamic distributed computing environments planned for future space missions. The algorithm uses a knowledge base that is easily changed and updated to reflect current system status. Augmented fault trees represented in an object-oriented form provide deep system knowledge that is easy to access and revise as a system changes. Given such a fault tree, a set of failure events that have occurred, and a set of failure events that have not occurred, this diagnosis system uses forward and backward chaining to propagate causal and temporal information about other failure events in the system being diagnosed. Once the system has established temporal and causal constraints, it reasons backward from heuristically selected failure events to find a set of basic failure events which are a likely cause of the occurrence of the top failure event in the fault tree. The diagnosis system has been implemented in common LISP using Flavors.

  5. [Failure mode and effects analysis to improve quality in clinical trials].

    PubMed

    Mañes-Sevilla, M; Marzal-Alfaro, M B; Romero Jiménez, R; Herranz-Alonso, A; Sanchez Fresneda, M N; Benedi Gonzalez, J; Sanjurjo-Sáez, M

    The failure mode and effects analysis (FMEA) has been used as a tool in risk management and quality improvement. The objective of this study is to identify the weaknesses in processes in the clinical trials area, of a Pharmacy Department (PD) with great research activity, in order to improve the safety of the usual procedures. A multidisciplinary team was created to analyse each of the critical points, identified as possible failure modes, in the development of clinical trial in the PD. For each failure mode, the possible cause and effect were identified, criticality was calculated using the risk priority number and the possible corrective actions were discussed. Six sub-processes were defined in the development of the clinical trials in PD. The FMEA identified 67 failure modes, being the dispensing and prescription/validation sub-processes the most likely to generate errors. All the improvement actions established in the AMFE were implemented in the Clinical Trials area. The FMEA is a useful tool in proactive risk management because it allows us to identify where we are making mistakes and analyze the causes that originate them, to prioritize and to adopt solutions to risk reduction. The FMEA improves process safety and quality in PD. Copyright © 2018 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

  6. Common feeding problems in babies and children: 2.

    PubMed

    Gilbert, P

    1998-01-01

    Weaning is the cause of much concern among first-time mothers. A milk-only diet is advised until 3-4 months of age. Health professionals should ensure the baby receives a sufficient and balanced diet during the weaning period, to meet the needs for energy and growth. Breast milk or infant formula should continue up to the age of at least one year. The weaning period is a good time to educate parents in good nutrition. A wide variety of foods should be the aim in child nutrition, but each different type needs to be started separately during weaning. Care is needed to ensure vegetarian babies receive enough proteins, vitamins and minerals (especially iron). Failure to thrive has a multitude of causes, and treatment must be that of the cause. Strictly vegan children who eat no dairy products will need added synthetic vitamin B12. Failure to thrive may be due to physical problems (eg choanal atresia), infection, vomiting, diarrhoea, anorexia, parental ignorance or poverty. Other causes include coeliac disease, cow's milk protein allergy, cystic fibrosis, severe eczema or asthma, or diabetes.

  7. Integrating Insults: Using Fault Tree Analysis to Guide Schizophrenia Research across Levels of Analysis.

    PubMed

    MacDonald Iii, Angus W; Zick, Jennifer L; Chafee, Matthew V; Netoff, Theoden I

    2015-01-01

    The grand challenges of schizophrenia research are linking the causes of the disorder to its symptoms and finding ways to overcome those symptoms. We argue that the field will be unable to address these challenges within psychiatry's standard neo-Kraepelinian (DSM) perspective. At the same time the current corrective, based in molecular genetics and cognitive neuroscience, is also likely to flounder due to its neglect for psychiatry's syndromal structure. We suggest adopting a new approach long used in reliability engineering, which also serves as a synthesis of these approaches. This approach, known as fault tree analysis, can be combined with extant neuroscientific data collection and computational modeling efforts to uncover the causal structures underlying the cognitive and affective failures in people with schizophrenia as well as other complex psychiatric phenomena. By making explicit how causes combine from basic faults to downstream failures, this approach makes affordances for: (1) causes that are neither necessary nor sufficient in and of themselves; (2) within-diagnosis heterogeneity; and (3) between diagnosis co-morbidity.

  8. Comorbidities, risk factors and outcomes in patients with heart failure and an ejection fraction of more than or equal to 40% in primary care- and hospital care-based outpatient clinics.

    PubMed

    Eriksson, B; Wändell, P; Dahlström, U; Näsman, P; Lund, L H; Edner, M

    2018-06-01

    The aim of this study is to describe patients with heart failure and an ejection fraction (EF) of more than or equal to 40%, managed in both Primary- and Hospital based outpatient clinics separately with their prognosis, comorbidities and risk factors. Further to compare the heart failure medication in the two groups. We used the prospective Swedish Heart Failure Registry to include 9654 out-patients who had HF and EF ≥40%, 1802 patients were registered in primary care and 7852 in hospital care. Descriptive statistical tests were used to analyze base line characteristics in the two groups and multivariate logistic regression analysis to assess mortality rate in the groups separately. The prospective Swedish Heart Failure Registry. Patients with heart failure and an ejection fraction (EF) of more than or equal to 40%. Comorbidities, risk factors and mortality. Mean-age was 77.5 (primary care) and 70.3 years (hospital care) p < 0.0001, 46.7 vs. 36.3% women respectively (p < 0.0001) and EF ≥50% 26.1 vs. 13.4% (p < 0.0001). Co-morbidities were common in both groups (97.2% vs. 92.3%), the primary care group having more atrial fibrillation, hypertension, ischemic heart disease and COPD. According to the multivariate logistic regression analysis smoking, COPD and diabetes were the most important independent risk factors in the primary care group and valvular disease in the hospital care group. All-cause mortality during mean follow-up of almost 4 years was 31.5% in primary care and 27.8% in hospital care. One year-mortality rates were 7.8%, and 7.0% respectively. Any co-morbidity was noted in 97% of the HF-patients with an EF of more than or equal to 40% managed at primary care based out-patient clinics and these patients had partly other independent risk factors than those patients managed in hospital care based outpatients clinics. Our results indicate that more attention should be payed to manage COPD in the primary care group. KEY POINTS 97% of heart failure patients with an ejection fraction of more than or equal to 40% managed at primary care based out-patient clinics had any comorbidity. Patients in primary care had partly other independent risk factors than those in hospital care. All-cause mortality during mean follow-up of almost 4 years was higher in primary care compared to hospital care. In matched HF-patients RAS-antagonists, beta-blockers as well as the combination of the two drugs were more seldom prescribed when managed in primary care compared with hospital care.

  9. Estimating the proportion of pneumonia attributable to pneumococcus in Kenyan adults: latent class analysis.

    PubMed

    Jokinen, Jukka; Scott, J Anthony G

    2010-09-01

    Community-acquired pneumonia is a common cause of hospitalization among African adults, and Streptococcus pneumoniae is assumed to be a frequent cause. Pneumococcal conjugate vaccine is currently being introduced into childhood immunization programs in Africa. The case for adult vaccination is dependent on the contribution of the pneumococcus to the hospital pneumonia burden. Pneumococcal diagnosis is complex because there is no gold standard, and culture methods are invalidated by antibiotic use. We used latent class analysis to estimate the proportion of pneumonia episodes caused by pneumococcus. Furthermore, we extended this methodology to evaluate the effect of antimicrobial treatment on test accuracies and the prevalence of the disease. The study combined data from 5 validation studies of pneumococcal diagnostic tests performed on 281 Kenyan adults with pneumonia. The proportion of pneumonia episodes attributable to pneumococcus was 0.46 (95% confidence interval = 0.36-0.57). Failure to account for the effect of antimicrobial exposure underestimates this proportion as 0.32. A history of antibiotic exposure was a poor predictor of antimicrobial activity in patients' urine. Blood culture sensitivity for pneumococcus was estimated at 0.24 among patients with antibiotic exposure, and 0.75 among those without. The large contribution of pneumococcus to adult pneumonia provides a strong case for the investigation of pneumococcal vaccines in African adults.

  10. The role of laparoscopic surgery in the management of a malfunctioning peritoneal catheter.

    PubMed

    Alabi, A; Dholakia, S; Ablorsu, E

    2014-11-01

    Peritoneal catheter malfunction is a common complication of peritoneal dialysis (PD). It has a high failure rate with conservative management. Catheter replacement was historically the standard surgical treatment of choice. Nowadays, laparoscopy has been introduced as an alternative surgical modality to rescue the malfunctioning peritoneal catheter and also offers the possibility of replacement if indicated. The aim of this study was to compare the outcomes of these two surgical modalities. The medical records of consecutive patients who underwent surgical treatment for malfunctioning PD catheters (between January 2010 and April 2013) were analysed. The primary outcome included successful return to adequate PD. The secondary endpoint was length of catheter patency and the cause of catheter failure. A total of 32 cases were identified, of which 8 had open catheter replacement and 24 had a laparoscopic intervention. The overall median follow-up duration was 12.5 months. The success rate for laparoscopic surgery in terms of functioning catheter at 12 months was 62.5% but only 37.5% for open surgery. The mean length of catheter patency after laparoscopic intervention was 31.6 months compared with only 13.6 months for the open surgery group. The most common cause of catheter failure diagnosed during laparoscopic intervention was catheter migration (33.0%), followed by omental wrap and catheter blockage by fibrin/blood plug (25.0% each). Open surgery did not have any diagnostic potential. Laparoscopy is the treatment of choice for malfunctioning PD. Its proven benefit includes simultaneous identification of the aetiological cause of malfunction together with direct correction of this problem, thereby maximising outcome. It also allows for rapid recommencement of PD and avoidance of haemodialysis, saving cost and resources.

  11. Development of a checklist in risk management in thyroidectomy.

    PubMed

    Pardal-Refoyo, José Luis; Cuello-Azcárate, Jesús Javier; Santiago-Peña, Luis Francisco

    2014-11-01

    Communication failures may result in inadequate treatment and patient harm, and are among the most common causes of sentinel events. Checklists are part of cycles to improve quality of the care process, promote communication between professionals involved in the different stages, help detect failures and risks, and increase patient safety. The lack of checklists at each stage was identified as a factor contributing to communication failures. To design checklists at different stages of the thyroidectomy care process to improve the communication between the professionals involved. Multidisciplinary working team consisting of specialists in otolaryngology, anesthesiology, and endocrinology. The process of thyroidectomy was divided into three stages (preoperative -A-, operative -B- and postoperative -C-). Potential safety incidents and failures at each stage and their contributing factors (causes) were identified by literature review and brainstorming. Checklists for each checkpoint were designed by consensus of the working group. The items correspond to factors contributing to the occurrence of incidents in the perioperative stage of thyroidectomy related to patients, technological equipment, environment, management, and organization. Lists of items should be checked by the appropriate specialist in each stage. Checklists in thyroid surgery are tools that allow for testing at different checkpoints data related to factors contributing to the occurrence of failures at each stage of the care process. Copyright © 2014 SEEN. Published by Elsevier Espana. All rights reserved.

  12. Prediction of damage formation in hip arthroplasties by finite element analysis using computed tomography images.

    PubMed

    Abdullah, Abdul Halim; Todo, Mitsugu; Nakashima, Yasuharu

    2017-06-01

    Femoral bone fracture is one of the main causes for the failure of hip arthroplasties (HA). Being subjected to abrupt and high impact forces in daily activities may lead to complex loading configuration such as bending and sideway falls. The objective of this study is to predict the risk of femoral bone fractures in total hip arthroplasty (THA) and resurfacing hip arthroplasty (RHA). A computed tomography (CT) based on finite element analysis was conducted to demonstrate damage formation in a three dimensional model of HAs. The inhomogeneous model of femoral bone was constructed from a 79 year old female patient with hip osteoarthritis complication. Two different femoral components were modeled with titanium alloy and cobalt chromium and inserted into the femoral bones to present THA and RHA models respectively. The analysis included six configurations, which exhibited various loading and boundary conditions, including axial compression, torsion, lateral bending, stance and two types of falling configurations. The applied hip loadings were normalized to body weight (BW) and accumulated from 1 BW to 3 BW. Predictions of damage formation in the femoral models were discussed as the resulting tensile failure as well as the compressive yielding and failure elements. The results indicate that loading directions can forecast the pattern and location of fractures at varying magnitudes of loading. Lateral bending configuration experienced the highest damage formation in both THA and RHA models. Femoral neck and trochanteric regions were in a common location in the RHA model in most configurations, while the predicted fracture locations in THA differed as per the Vancouver classification. Copyright © 2017 IPEM. Published by Elsevier Ltd. All rights reserved.

  13. Subtyping of STEC by MLVA in Argentina.

    PubMed

    Bustamante, Ana V; Sanso, Andrea M; Parma, Alberto E; Lucchesi, Paula M A

    2012-01-01

    Shiga toxin-producing Escherichia coli (STEC) causes serious human illness such as hemolytic uremic syndrome (HUS). Argentina has the world's highest rate of this syndrome, which is the leading cause of acute renal failure among children. E. coli O157:H7 is the most common cause of HUS, but a substantial and growing proportion of this illness is caused by infection due to non-O157 strains. Multiple-locus variable-number tandem repeat analysis (MLVA) has become an established technique to subtype STEC. This review will address the use of routine STEC subtyping by MLVA in order to type this group of isolates and to get insight into the genetic diversity of native STEC. With regard to these objectives we modified and adapted two MLVA protocols, one exclusive for O157 and the other, a generic E. coli assay. A total of 202 STEC isolates, from different sources and corresponding to 20 serotypes, have been MLVA genotyped in our laboratory. In our experience, MLVA constitutes a very sensitive tool and enables us to perform an efficient STEC subtyping. The diversity found in many serotypes may be useful for future epidemiological studies of STEC clonality, applied to O157 as well as to non-O157 isolates.

  14. Associations Between Neutrophil Gelatinase Associated Lipocalin, Neutrophil-to-Lymphocyte Ratio, Atrial Fibrillation and Renal Dysfunction in Chronic Heart Failure

    PubMed Central

    Argan, Onur; Ural, Dilek; Kozdag, Guliz; Sahin, Tayfun; Bozyel, Serdar; Aktas, Mujdat; Karauzum, Kurtulus; Yılmaz, Irem; Dervis, Emir; Agir, Aysen

    2016-01-01

    Background Atrial fibrillation (AF) and renal dysfunction are two common comorbidities in patients with chronic heart failure with reduced ejection fraction (HFrEF). This study evaluated the effect of permanent AF on renal function in HFrEF and investigated the associations of atrial fibrillation, neutrophil gelatinase-associated lipocalin (NGAL), and neutrophil-to-lymphocyte ratio (NLR) with adverse clinical outcome. Material/Methods Serum NGAL levels measured by ELISA and NLR were compared between patients with sinus rhythm (HFrEF-SR, n=68), with permanent AF (HFrEF-AF, n=62), and a healthy control group (n=50). Results Mean eGFR levels were significantly lower, and NLR and NGAL levels were significantly higher in the HFrEF patients than in the control patients but the difference between HFrEF-SR and HFrEF-AF was not statistically significant (NGAL: 95 ng/mL in HFrEF-SR, 113 ng/mL in HFrEF-AF and 84 ng/mL in the control group; p<0.001). Independent associates of baseline eGFR were age, hemoglobin, NLR, triiodothyronine, and pulmonary artery systolic pressure. In a mean 16 months follow-up, adverse clinical outcome defined as progression of kidney dysfunction and composite of all-cause mortality and re-hospitalization were not different between HFrEF-SR and HFrEF-AF patients. Although NGAL was associated with clinical endpoints in the univariate analysis, Cox regression analysis showed that independent predictors of increased events were the presence of signs right heart failure, C-reactive protein, NLR, triiodothyronine, and hemoglobin. In ROC analysis, a NLR >3 had a 68% sensitivity and 75% specificity to predict progression of kidney disease (AUC=0.72, 95% CI 0.58–0.85, p=0.001). Conclusions Presence of AF in patients with HFrEF was not an independent contributor of adverse clinical outcome (i.e., all-cause death, re-hospitalization) or progression of renal dysfunction. Renal dysfunction in HFrEF was associated with both NLR and NGAL levels, but systemic inflammation reflected by NLR seemed to be a more important determinant of progression of kidney dysfunction. PMID:27918494

  15. Failure Analysis Results and Corrective Actions Implemented for the Extravehicular Mobility Unit 3011 Water in the Helmet Mishap

    NASA Technical Reports Server (NTRS)

    Steele, John; Metselaar, Carol; Peyton, Barbara; Rector, Tony; Rossato, Robert; Macias, Brian; Weigel, Dana; Holder, Don

    2015-01-01

    Water entered the Extravehicular Mobility Unit (EMU) helmet during extravehicular activity (EVA) no. 23 aboard the International Space Station on July 16, 2013, resulting in the termination of the EVA approximately 1 hour after it began. It was estimated that 1.5 liters of water had migrated up the ventilation loop into the helmet, adversely impacting the astronaut's hearing, vision, and verbal communication. Subsequent on-board testing and ground-based test, tear-down, and evaluation of the affected EMU hardware components determined that the proximate cause of the mishap was blockage of all water separator drum holes with a mixture of silica and silicates. The blockages caused a failure of the water separator degassing function, which resulted in EMU cooling water spilling into the ventilation loop, migrating around the circulating fan, and ultimately pushing into the helmet. The root cause of the failure was determined to be ground-processing shortcomings of the Airlock Cooling Loop Recovery (ALCLR) Ion Filter Beds, which led to various levels of contaminants being introduced into the filters before they left the ground. Those contaminants were thereafter introduced into the EMU hardware on-orbit during ALCLR scrubbing operations. This paper summarizes the failure analysis results along with identified process, hardware, and operational corrective actions that were implemented as a result of findings from this investigation.

  16. Failure Analysis Results and Corrective Actions Implemented for the EMU 3011 Water in the Helmet Mishap

    NASA Technical Reports Server (NTRS)

    Steele, John; Metselaar, Carol; Peyton, Barbara; Rector, Tony; Rossato, Robert; Macias, Brian; Weigel, Dana; Holder, Don

    2015-01-01

    During EVA (Extravehicular Activity) No. 23 aboard the ISS (International Space Station) on 07/16/2013 water entered the EMU (Extravehicular Mobility Unit) helmet resulting in the termination of the EVA (Extravehicular Activity) approximately 1-hour after it began. It was estimated that 1.5-L of water had migrated up the ventilation loop into the helmet, adversely impacting the astronauts hearing, vision and verbal communication. Subsequent on-board testing and ground-based TT and E (Test, Tear-down and Evaluation) of the affected EMU hardware components led to the determination that the proximate cause of the mishap was blockage of all water separator drum holes with a mixture of silica and silicates. The blockages caused a failure of the water separator function which resulted in EMU cooling water spilling into the ventilation loop, around the circulating fan, and ultimately pushing into the helmet. The root cause of the failure was determined to be ground-processing short-comings of the ALCLR (Airlock Cooling Loop Recovery) Ion Filter Beds which led to various levels of contaminants being introduced into the Filters before they left the ground. Those contaminants were thereafter introduced into the EMU hardware on-orbit during ALCLR scrubbing operations. This paper summarizes the failure analysis results along with identified process, hardware and operational corrective actions that were implemented as a result of findings from this investigation.

  17. How to apply clinical cases and medical literature in the framework of a modified "failure mode and effects analysis" as a clinical reasoning tool--an illustration using the human biliary system.

    PubMed

    Wong, Kam Cheong

    2016-04-06

    Clinicians use various clinical reasoning tools such as Ishikawa diagram to enhance their clinical experience and reasoning skills. Failure mode and effects analysis, which is an engineering methodology in origin, can be modified and applied to provide inputs into an Ishikawa diagram. The human biliary system is used to illustrate a modified failure mode and effects analysis. The anatomical and physiological processes of the biliary system are reviewed. Failure is defined as an abnormality caused by infective, inflammatory, obstructive, malignancy, autoimmune and other pathological processes. The potential failures, their effect(s), main clinical features, and investigation that can help a clinician to diagnose at each anatomical part and physiological process are reviewed and documented in a modified failure mode and effects analysis table. Relevant medical and surgical cases are retrieved from the medical literature and weaved into the table. A total of 80 clinical cases which are relevant to the modified failure mode and effects analysis for the human biliary system have been reviewed and weaved into a designated table. The table is the backbone and framework for further expansion. Reviewing and updating the table is an iterative and continual process. The relevant clinical features in the modified failure mode and effects analysis are then extracted and included in the relevant Ishikawa diagram. This article illustrates an application of engineering methodology in medicine, and it sows the seeds of potential cross-pollination between engineering and medicine. Establishing a modified failure mode and effects analysis can be a teamwork project or self-directed learning process, or a mix of both. Modified failure mode and effects analysis can be deployed to obtain inputs for an Ishikawa diagram which in turn can be used to enhance clinical experiences and clinical reasoning skills for clinicians, medical educators, and students.

  18. Tensile and compressive failure modes of laminated composites loaded by fatigue with different mean stress

    NASA Technical Reports Server (NTRS)

    Rotem, Assa

    1990-01-01

    Laminated composite materials tend to fail differently under tensile or compressive load. Under tension, the material accumulates cracks and fiber fractures, while under compression, the material delaminates and buckles. Tensile-compressive fatigue may cause either of these failure modes depending on the specific damage occurring in the laminate. This damage depends on the stress ratio of the fatigue loading. Analysis of the fatigue behavior of the composite laminate under tension-tension, compression-compression, and tension-compression had led to the development of a fatigue envelope presentation of the failure behavior. This envelope indicates the specific failure mode for any stress ratio and number of loading cycles. The construction of the fatigue envelope is based on the applied stress-cycles to failure (S-N) curves of both tensile-tensile and compressive-compressive fatigue. Test results are presented to verify the theoretical analysis.

  19. Pushover analysis of reinforced concrete frames considering shear failure at beam-column joints

    NASA Astrophysics Data System (ADS)

    Sung, Y. C.; Lin, T. K.; Hsiao, C. C.; Lai, M. C.

    2013-09-01

    Since most current seismic capacity evaluations of reinforced concrete (RC) frame structures are implemented by either static pushover analysis (PA) or dynamic time history analysis, with diverse settings of the plastic hinges (PHs) on such main structural components as columns, beams and walls, the complex behavior of shear failure at beam-column joints (BCJs) during major earthquakes is commonly neglected. This study proposes new nonlinear PA procedures that consider shear failure at BCJs and seek to assess the actual damage to RC structures. Based on the specifications of FEMA-356, a simplified joint model composed of two nonlinear cross struts placed diagonally over the location of the plastic hinge is established, allowing a sophisticated PA to be performed. To verify the validity of this method, the analytical results for the capacity curves and the failure mechanism derived from three different full-size RC frames are compared with the experimental measurements. By considering shear failure at BCJs, the proposed nonlinear analytical procedures can be used to estimate the structural behavior of RC frames, including seismic capacity and the progressive failure sequence of joints, in a precise and effective manner.

  20. Genetic analysis of inherited bone marrow failure syndromes from one prospective, comprehensive and population-based cohort and identification of novel mutations.

    PubMed

    Tsangaris, E; Klaassen, R; Fernandez, C V; Yanofsky, R; Shereck, E; Champagne, J; Silva, M; Lipton, J H; Brossard, J; Michon, B; Abish, S; Steele, M; Ali, K; Dower, N; Athale, U; Jardine, L; Hand, J P; Odame, I; Canning, P; Allen, C; Carcao, M; Beyene, J; Roifman, C M; Dror, Y

    2011-09-01

    Inherited bone marrow failure syndromes (IBMFSs) often have substantial phenotypic overlap, thus genotyping is often critical for establishing a diagnosis. To determine the genetic characteristics and mutation profiles of IBMFSs, a comprehensive population-based study that prospectively enrols all typical and atypical cases without bias is required. The Canadian Inherited Marrow Failure Study is such a study, and was used to extract clinical and genetic information for patients enrolled up to May 2010. Among the 259 primary patients with IBMFS enrolled in the study, the most prevalent categories were Diamond-Blackfan anaemia (44 patients), Fanconi anaemia (39) and Shwachman-Diamond syndrome (35). The estimated incidence of the primary IBMFSs was 64.5 per 10(6) births, with Fanconi anaemia having the highest incidence (11.4 cases per 10(6) births). A large number of patients (70) had haematological and non-haematological features that did not fulfil the diagnostic criteria of any specific IBMFS category. Disease-causing mutations were identified in 53.5% of the 142 patients tested, and in 16 different genes. Ten novel mutations in SBDS, RPL5, FANCA, FANCG, MPL and G6PT were identified. The most common mutations were nonsense (31 alleles) and splice site (28). Genetic heterogeneity of most IBMFSs was evident; however, the most commonly mutated gene was SBDS, followed by FANCA and RPS19. From this the largest published comprehensive cohort of IBMFSs, it can be concluded that recent advances have led to successful genotyping of about half of the patients. Establishing a genetic diagnosis is still challenging and there is a critical need to develop novel diagnostic tools.

  1. Impact of acute lung injury and acute respiratory distress syndrome after traumatic brain injury in the United States.

    PubMed

    Rincon, Fred; Ghosh, Sayantani; Dey, Saugat; Maltenfort, Mitchell; Vibbert, Matthew; Urtecho, Jacqueline; McBride, William; Moussouttas, Michael; Bell, Rodney; Ratliff, John K; Jallo, Jack

    2012-10-01

    Traumatic brain injury (TBI) is a major cause of disability, morbidity, and mortality. The effect of the acute respiratory distress syndrome and acute lung injury (ARDS/ALI) on in-hospital mortality after TBI remains controversial. To determine the epidemiology of ARDS/ALI, the prevalence of risk factors, and impact on in-hospital mortality after TBI in the United States. Retrospective cohort study of admissions of adult patients>18 years with a diagnosis of TBI and ARDS/ALI from 1988 to 2008 identified through the Nationwide Inpatient Sample. During the 20-year study period, the prevalence of ARDS/ALI increased from 2% (95% confidence interval [CI], 2.1%-2.4%) in 1988 to 22% (95% CI, 21%-22%) in 2008 (P<.001). ARDS/ALI was more common in younger age; males; white race; later year of admission; in conjunction with comorbidities such as congestive heart failure, hypertension, chronic obstructive pulmonary disease, chronic renal and liver failure, sepsis, multiorgan dysfunction; and nonrural, medium/large hospitals, located in the Midwest, South, and West continental US location. Mortality after TBI decreased from 13% (95% CI, 12%-14%) in 1988 to 9% (95% CI, 9%-10%) in 2008 (P<.001). ARDS/ALI-related mortality after TBI decreased from 33% (95% CI, 33%-34%) in 1988 to 28% (95% CI, 28%-29%) in 2008 (P<.001). Predictors of in-hospital mortality after TBI were older age, male sex, white race, cancer, chronic kidney disease, hypertension, chronic liver disease, congestive heart failure, ARDS/ALI, and organ dysfunctions. Our analysis demonstrates that ARDS/ALI is common after TBI. Despite an overall reduction of in-hospital mortality, ARDS/ALI carries a higher risk of in-hospital death after TBI.

  2. Uncoupling of oxidative phosphorylation and ATP synthase reversal within the hyperthermic heart.

    PubMed

    Power, Amelia; Pearson, Nicholas; Pham, Toan; Cheung, Carlos; Phillips, Anthony; Hickey, Anthony

    2014-09-01

    Heart failure is a common cause of death with hyperthermia, and the exact cause of hyperthermic heart failure appears elusive. We hypothesize that the energy supply (ATP) of the heart may become impaired due to increased inner-mitochondrial membrane permeability and inefficient oxidative phosphorylation (OXPHOS). Therefore, we assessed isolated working heart and mitochondrial function. Ex vivo working rat hearts were perfused between 37 and 43.5°C and showed break points in all functional parameters at ~40.5°C. Mitochondrial high-resolution respirometry coupled to fluorometry was employed to determine the effects of hyperthermia on OXPHOS and mitochondrial membrane potential (ΔΨ) in vitro using a comprehensive metabolic substrate complement with isolated mitochondria. Relative to 37 and 40°C, 43°C elevated Leak O2 flux and depressed OXPHOS O2 flux and ∆Ψ. Measurement of steady-state ATP production from mitochondria revealed decreased ATP synthesis capacity, and a negative steady-state P:O ratio at 43°C. This approach offers a more powerful analysis of the effects of temperature on OXPHOS that cannot be measured using simple measures such as the traditional respiratory control ratio (RCR) or P:O ratio, which, respectively, can only approach 1 or 0 with inner-membrane failure. At 40°C there was only a slight enhancement of the Leak O2 flux and this did not significantly affect ATP production rate. Therefore, during mild hyperthermia (40°C) there is no enhancement of ATP supply by mitochondria, to accompany increasing cardiac energy demands, while between this and critical hyperthermia (43°C), mitochondria become net consumers of ATP. This consumption may contribute to cardiac failure or permanent damage during severe hyperthermia. © 2014 The Authors. Physiological Reports published by Wiley Periodicals, Inc. on behalf of the American Physiological Society and The Physiological Society.

  3. Lemierre's Syndrome – A rare cause of disseminated sepsis requiring multi-organ support

    PubMed Central

    Misselbrook, Katie

    2017-01-01

    Lemierre's syndrome is a rare complication of acute pharyngitis characterised by septicaemia with infective thrombophlebitis of the internal jugular vein, most commonly due to Fusobacterium necrophorum. It characteristically affects healthy young adults causing persistent pyrexia and systemic sepsis presenting several days after an initial pharyngitis. Septic emboli seed via the bloodstream to distant sites including the lung, joints, skin, liver, spleen and brain. Prolonged antimicrobial therapy is required and admission to intensive care common. This once rare condition is increasing in incidence but awareness amongst clinicians is low. We present a classic case in a young man who developed multi-organ failure requiring intensive care support and describe the epidemiology, pathophysiology, microbiology, clinical features and management of the disease. PMID:29123565

  4. Anatomy of an incident

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cournoyer, Michael E.; Trujillo, Stanley; Lawton, Cindy M.

    A traditional view of incidents is that they are caused by shortcomings in human competence, attention, or attitude. It may be under the label of “loss of situational awareness,” procedure “violation,” or “poor” management. A different view is that human error is not the cause of failure, but a symptom of failure – trouble deeper inside the system. In this perspective, human error is not the conclusion, but rather the starting point of investigations. During an investigation, three types of information are gathered: physical, documentary, and human (recall/experience). Through the causal analysis process, apparent cause or apparent causes are identifiedmore » as the most probable cause or causes of an incident or condition that management has the control to fix and for which effective recommendations for corrective actions can be generated. A causal analysis identifies relevant human performance factors. In the following presentation, the anatomy of a radiological incident is discussed, and one case study is presented. We analyzed the contributing factors that caused a radiological incident. When underlying conditions, decisions, actions, and inactions that contribute to the incident are identified. This includes weaknesses that may warrant improvements that tolerate error. Measures that reduce consequences or likelihood of recurrence are discussed.« less

  5. Anatomy of an incident

    DOE PAGES

    Cournoyer, Michael E.; Trujillo, Stanley; Lawton, Cindy M.; ...

    2016-03-23

    A traditional view of incidents is that they are caused by shortcomings in human competence, attention, or attitude. It may be under the label of “loss of situational awareness,” procedure “violation,” or “poor” management. A different view is that human error is not the cause of failure, but a symptom of failure – trouble deeper inside the system. In this perspective, human error is not the conclusion, but rather the starting point of investigations. During an investigation, three types of information are gathered: physical, documentary, and human (recall/experience). Through the causal analysis process, apparent cause or apparent causes are identifiedmore » as the most probable cause or causes of an incident or condition that management has the control to fix and for which effective recommendations for corrective actions can be generated. A causal analysis identifies relevant human performance factors. In the following presentation, the anatomy of a radiological incident is discussed, and one case study is presented. We analyzed the contributing factors that caused a radiological incident. When underlying conditions, decisions, actions, and inactions that contribute to the incident are identified. This includes weaknesses that may warrant improvements that tolerate error. Measures that reduce consequences or likelihood of recurrence are discussed.« less

  6. A Survey of Logic Formalisms to Support Mishap Analysis

    NASA Technical Reports Server (NTRS)

    Johnson, Chris; Holloway, C. M.

    2003-01-01

    Mishap investigations provide important information about adverse events and near miss incidents. They are intended to help avoid any recurrence of previous failures. Over time, they can also yield statistical information about incident frequencies that helps to detect patterns of failure and can validate risk assessments. However, the increasing complexity of many safety critical systems is posing new challenges for mishap analysis. Similarly, the recognition that many failures have complex, systemic causes has helped to widen the scope of many mishap investigations. These two factors have combined to pose new challenges for the analysis of adverse events. A new generation of formal and semi-formal techniques have been proposed to help investigators address these problems. We introduce the term mishap logics to collectively describe these notations that might be applied to support the analysis of mishaps. The proponents of these notations have argued that they can be used to formally prove that certain events created the necessary and sufficient causes for a mishap to occur. These proofs can be used to reduce the bias that is often perceived to effect the interpretation of adverse events. Others have argued that one cannot use logic formalisms to prove causes in the same way that one might prove propositions or theorems. Such mechanisms cannot accurately capture the wealth of inductive, deductive and statistical forms of inference that investigators must use in their analysis of adverse events. This paper provides an overview of these mishap logics. It also identifies several additional classes of logic that might also be used to support mishap analysis.

  7. Application of Failure Mode and Effect Analysis (FMEA) and cause and effect analysis in conjunction with ISO 22000 to a snails (Helix aspersa) processing plant; A case study.

    PubMed

    Arvanitoyannis, Ioannis S; Varzakas, Theodoros H

    2009-08-01

    Failure Mode and Effect Analysis (FMEA) has been applied for the risk assessment of snails manufacturing. A tentative approach of FMEA application to the snails industry was attempted in conjunction with ISO 22000. Preliminary Hazard Analysis was used to analyze and predict the occurring failure modes in a food chain system (snails processing plant), based on the functions, characteristics, and/or interactions of the ingredients or the processes, upon which the system depends. Critical Control points have been identified and implemented in the cause and effect diagram (also known as Ishikawa, tree diagram, and fishbone diagram). In this work a comparison of ISO22000 analysis with HACCP is carried out over snails processing and packaging. However, the main emphasis was put on the quantification of risk assessment by determining the RPN per identified processing hazard. Sterilization of tins, bioaccumulation of heavy metals, packaging of shells and poisonous mushrooms, were the processes identified as the ones with the highest RPN (280, 240, 147, 144, respectively) and corrective actions were undertaken. Following the application of corrective actions, a second calculation of RPN values was carried out leading to considerably lower values (below the upper acceptable limit of 130). It is noteworthy that the application of Ishikawa (Cause and Effect or Tree diagram) led to converging results thus corroborating the validity of conclusions derived from risk assessment and FMEA. Therefore, the incorporation of FMEA analysis within the ISO22000 system of a snails processing industry is considered imperative.

  8. Reliability Growth in Space Life Support Systems

    NASA Technical Reports Server (NTRS)

    Jones, Harry W.

    2014-01-01

    A hardware system's failure rate often increases over time due to wear and aging, but not always. Some systems instead show reliability growth, a decreasing failure rate with time, due to effective failure analysis and remedial hardware upgrades. Reliability grows when failure causes are removed by improved design. A mathematical reliability growth model allows the reliability growth rate to be computed from the failure data. The space shuttle was extensively maintained, refurbished, and upgraded after each flight and it experienced significant reliability growth during its operational life. In contrast, the International Space Station (ISS) is much more difficult to maintain and upgrade and its failure rate has been constant over time. The ISS Carbon Dioxide Removal Assembly (CDRA) reliability has slightly decreased. Failures on ISS and with the ISS CDRA continue to be a challenge.

  9. Magellan/Galileo solder joint failure analysis and recommendations

    NASA Technical Reports Server (NTRS)

    Ross, Ronald G., Jr.

    1989-01-01

    On or about November 10, 1988 an open circuit solder joint was discovered in the Magellan Radar digital unit (DFU) during integration testing at Kennedy Space Center (KSC). A detailed analysis of the cause of the failure was conducted at the Jet Propulsion Laboratory leading to the successful repair of many pieces of affected electronic hardware on both the Magellan and Galileo spacecraft. The problem was caused by the presence of high thermal coefficient of expansion heat sink and conformal coating materials located in the large (0.055 inch) gap between Dual Inline Packages (DIPS) and the printed wiring board. The details of the observed problems are described and recommendations are made for improved design and testing activities in the future.

  10. Reliability of lead-calcium automotive batteries in practical operations

    NASA Astrophysics Data System (ADS)

    Burghoff, H.-G.; Richter, G.

    In order to reach a statistically sound conclusion on the suitability of maintenance-free, lead-calcium automotive batteries for practical operations, the failure behaviour of such batteries has been observed in a large-scale experiment carried out by Mercedes Benz AG and Robert Bosch GmbH in different climatic zones of North America. The results show that the average failure behaviour is not significantly different to that of batteries from other manufacturers using other grid alloy systems and operated under otherwise identical conditions; the cumulative failure probability after 30 months is 17%. The principal causes of failure are: (i) early failure: transport damage, filling errors, and short-circuits due to the outer plates being pushed up during plate-block assembly (manufacturing defect); (ii) statistical failure: short-circuits due to growth of positive plates caused by a reduction in the mechanical strength of the cast positive grid as a result of corrosion; (iii) late failure due to an increased occurrence of short-circuits, especially frequent in outer cell facing the engine of the vehicle (subjected to high temperature), and to defects caused by capacity decay. As expected, the batteries exhibit extremely low water loss in each cell. The poor cyclical performance of stationary batteries, caused by acid stratification and well-known from laboratory tests, has no detrimental effect on the batteries in use. After a thorough analysis of the corrosion process, the battery manufacturer changed the grid alloy and the method of its production, and thus limited the corrosion problem with cast lead-calcium grids and with it the possibility of plate growth. The mathematical methods used in this study, and in particular the characteristic factors derived from them, have proven useful for assessing the suitability of automotive batteries.

  11. Analysis of risk factors for cluster behavior of dental implant failures.

    PubMed

    Chrcanovic, Bruno Ramos; Kisch, Jenö; Albrektsson, Tomas; Wennerberg, Ann

    2017-08-01

    Some studies indicated that implant failures are commonly concentrated in few patients. To identify and analyze cluster behavior of dental implant failures among subjects of a retrospective study. This retrospective study included patients receiving at least three implants only. Patients presenting at least three implant failures were classified as presenting a cluster behavior. Univariate and multivariate logistic regression models and generalized estimating equations analysis evaluated the effect of explanatory variables on the cluster behavior. There were 1406 patients with three or more implants (8337 implants, 592 failures). Sixty-seven (4.77%) patients presented cluster behavior, with 56.8% of all implant failures. The intake of antidepressants and bruxism were identified as potential negative factors exerting a statistically significant influence on a cluster behavior at the patient-level. The negative factors at the implant-level were turned implants, short implants, poor bone quality, age of the patient, the intake of medicaments to reduce the acid gastric production, smoking, and bruxism. A cluster pattern among patients with implant failure is highly probable. Factors of interest as predictors for implant failures could be a number of systemic and local factors, although a direct causal relationship cannot be ascertained. © 2017 Wiley Periodicals, Inc.

  12. Sensor Failure Detection of FASSIP System using Principal Component Analysis

    NASA Astrophysics Data System (ADS)

    Sudarno; Juarsa, Mulya; Santosa, Kussigit; Deswandri; Sunaryo, Geni Rina

    2018-02-01

    In the nuclear reactor accident of Fukushima Daiichi in Japan, the damages of core and pressure vessel were caused by the failure of its active cooling system (diesel generator was inundated by tsunami). Thus researches on passive cooling system for Nuclear Power Plant are performed to improve the safety aspects of nuclear reactors. The FASSIP system (Passive System Simulation Facility) is an installation used to study the characteristics of passive cooling systems at nuclear power plants. The accuracy of sensor measurement of FASSIP system is essential, because as the basis for determining the characteristics of a passive cooling system. In this research, a sensor failure detection method for FASSIP system is developed, so the indication of sensor failures can be detected early. The method used is Principal Component Analysis (PCA) to reduce the dimension of the sensor, with the Squarred Prediction Error (SPE) and statistic Hotteling criteria for detecting sensor failure indication. The results shows that PCA method is capable to detect the occurrence of a failure at any sensor.

  13. Evaluation of Related Factors in the Failure of Endodontically Treated Teeth: A Cross-sectional Study.

    PubMed

    Olcay, Keziban; Ataoglu, Hanife; Belli, Sema

    2018-01-01

    The aim of this study was to review the factors related to the failure and extraction of unsuccessful endodontically treated teeth. A total of 1000 teeth treated with nonsurgical root canal therapy were analyzed, and the following information was recorded for each patient: reasons for failure and extraction, type of tooth, presence and type of coronal restoration, smoking status, age, gender, and level of education. One main reason was recorded for each failed tooth. The associations between reasons for failure, patient, and tooth were tested by using χ 2 analysis. Of the 1000 endodontically failed teeth analyzed in this study, 28.1% (n = 281) were extracted, 66% (n = 660) were re-treated, and 5.9% (n = 59) were treated with apical surgery. Among the reasons for failure, restorative and endodontic reasons were seen most frequently (43.9%, n = 439), whereas orthodontic reasons were seldom seen (0.1%, n = 1). The most common reason for extraction was for prosthetic reasons (40.8%), and perforation/stripping was the least common (2.9%). The mandibular first molars were the most frequently extracted teeth (27.4%, n = 77). The most common reason for the extraction of endodontically treated teeth was for prosthetic reasons. Among the reasons for failure, restorative and endodontic reasons were the most frequently seen, and orthodontic reasons were the most seldom. The teeth that failed most frequently were mandibular first molars, and the teeth that failed least frequently were maxillary third molars. The most common reason for the extraction of failed endodontically treated teeth was for prosthetic reasons. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  14. Causes and prevention of sudden cardiac death in the elderly.

    PubMed

    Tung, Patricia; Albert, Christine M

    2013-03-01

    Sudden cardiac death (SCD) is a major cause of mortality in elderly individuals owing to a high prevalence of coronary heart disease, systolic dysfunction, and congestive heart failure (CHF). Although the incidence of SCD increases with age, the proportion of cardiac deaths that are sudden decreases owing to high numbers of other cardiac causes of death in elderly individuals. Implantable cardioverter-defibrillator (ICD) therapy has been demonstrated to improve survival and prevent SCD in selected patients with systolic dysfunction and CHF. However, ICD therapy in elderly patients might not be effective because of a greater rate of pulseless electrical activity underlying SCD and other competing nonarrhythmic causes of death in this population. Although under-represented in randomized trials of ICD use, elderly patients comprise a substantial proportion of the population that qualifies for and receives an ICD for primary prevention under current guidelines. Cardiac resynchronization therapy (CRT), which has been demonstrated to reduce mortality in selected populations with heart failure, is also more commonly used in this group of patients than in younger individuals. In this Review, we examine the causes of SCD in elderly individuals, and discuss the existing evidence for effectiveness of ICD therapy and CRT in this growing population.

  15. Heart failure outcomes with empagliflozin in patients with type 2 diabetes at high cardiovascular risk: results of the EMPA-REG OUTCOME® trial

    PubMed Central

    Fitchett, David; Zinman, Bernard; Wanner, Christoph; Lachin, John M.; Hantel, Stefan; Salsali, Afshin; Johansen, Odd Erik; Woerle, Hans J.; Broedl, Uli C.; Inzucchi, Silvio E.

    2016-01-01

    Abstract Aims We previously reported that in the EMPA-REG OUTCOME® trial, empagliflozin added to standard of care reduced the risk of 3-point major adverse cardiovascular events, cardiovascular and all-cause death, and hospitalization for heart failure in patients with type 2 diabetes and high cardiovascular risk. We have now further investigated heart failure outcomes in all patients and in subgroups, including patients with or without baseline heart failure. Methods and results Patients were randomized to receive empagliflozin 10 mg, empagliflozin 25 mg, or placebo. Seven thousand and twenty patients were treated; 706 (10.1%) had heart failure at baseline. Heart failure hospitalization or cardiovascular death occurred in a significantly lower percentage of patients treated with empagliflozin [265/4687 patients (5.7%)] than with placebo [198/2333 patients (8.5%)] [hazard ratio, HR: 0.66 (95% confidence interval: 0.55–0.79); P < 0.001], corresponding to a number needed to treat to prevent one heart failure hospitalization or cardiovascular death of 35 over 3 years. Consistent effects of empagliflozin were observed across subgroups defined by baseline characteristics, including patients with vs. without heart failure, and across categories of medications to treat diabetes and/or heart failure. Empagliflozin improved other heart failure outcomes, including hospitalization for or death from heart failure [2.8 vs. 4.5%; HR: 0.61 (0.47–0.79); P < 0.001] and was associated with a reduction in all-cause hospitalization [36.8 vs. 39.6%; HR: 0.89 (0.82–0.96); P = 0.003]. Serious adverse events and adverse events leading to discontinuation were reported by a higher proportion of patients with vs. without heart failure at baseline in both treatment groups, but were no more common with empagliflozin than with placebo. Conclusion In patients with type 2 diabetes and high cardiovascular risk, empagliflozin reduced heart failure hospitalization and cardiovascular death, with a consistent benefit in patients with and without baseline heart failure. PMID:26819227

  16. Advantage of the modified Lunn-McNeil technique over Kalbfleisch-Prentice technique in competing risks

    NASA Astrophysics Data System (ADS)

    Lukman, Iing; Ibrahim, Noor A.; Daud, Isa B.; Maarof, Fauziah; Hassan, Mohd N.

    2002-03-01

    Survival analysis algorithm is often applied in the data mining process. Cox regression is one of the survival analysis tools that has been used in many areas, and it can be used to analyze the failure times of aircraft crashed. Another survival analysis tool is the competing risks where we have more than one cause of failure acting simultaneously. Lunn-McNeil analyzed the competing risks in the survival model using Cox regression with censored data. The modified Lunn-McNeil technique is a simplify of the Lunn-McNeil technique. The Kalbfleisch-Prentice technique is involving fitting models separately from each type of failure, treating other failure types as censored. To compare the two techniques, (the modified Lunn-McNeil and Kalbfleisch-Prentice) a simulation study was performed. Samples with various sizes and censoring percentages were generated and fitted using both techniques. The study was conducted by comparing the inference of models, using Root Mean Square Error (RMSE), the power tests, and the Schoenfeld residual analysis. The power tests in this study were likelihood ratio test, Rao-score test, and Wald statistics. The Schoenfeld residual analysis was conducted to check the proportionality of the model through its covariates. The estimated parameters were computed for the cause-specific hazard situation. Results showed that the modified Lunn-McNeil technique was better than the Kalbfleisch-Prentice technique based on the RMSE measurement and Schoenfeld residual analysis. However, the Kalbfleisch-Prentice technique was better than the modified Lunn-McNeil technique based on power tests measurement.

  17. Testing and failure analysis to improve screening techniques for hermetically sealed metallized film capacitors for low energy applications

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Effective screening techniques are evaluated for detecting insulation resistance degradation and failure in hermetically sealed metallized film capacitors used in applications where low capacitor voltage and energy levels are common to the circuitry. A special test and monitoring system capable of rapidly scanning all test capacitors and recording faults and/or failures is examined. Tests include temperature cycling and storage as well as low, medium, and high voltage life tests. Polysulfone film capacitors are more heat stable and reliable than polycarbonate film units.

  18. Worsening of Renal Function During 1 Year After Hospital Discharge Is a Strong and Independent Predictor of All‐Cause Mortality in Acute Decompensated Heart Failure

    PubMed Central

    Ueda, Tomoya; Kawakami, Rika; Sugawara, Yu; Okada, Sadanori; Nishida, Taku; Onoue, Kenji; Soeda, Tsunenari; Okayama, Satoshi; Takeda, Yukiji; Watanabe, Makoto; Kawata, Hiroyuki; Uemura, Shiro; Saito, Yoshihiko

    2014-01-01

    Background Renal impairment is a common comorbidity and the strongest risk factor for poor prognosis in acute decompensated heart failure (ADHF). In clinical practice, renal function is labile during episodes of ADHF, and often worsens after discharge. The significance of worsening of renal function (WRF) after discharge has not been investigated as extensively as baseline renal function at admission or WRF during hospitalization. Methods and Results Among 611 consecutive patients with ADHF emergently admitted to our hospital, 233 patients with 3 measurements of serum creatinine (SCr) level measurements (on admission, at discharge, and 1 year after discharge) were included in the present study. Patients were divided into 2 groups according to the presence or absence of WRF at 1 year after discharge (1y‐WRF), defined as an absolute increase in SCr >0.3 mg/dL (>26.5 μmol/L) plus a ≥25% increase in SCr at 1 year after discharge compared to the SCr value at discharge. All‐cause and cardiovascular mortality were assessed as adverse outcomes. During a mean follow‐up of 35.4 months, 1y‐WRF occurred in 48 of 233 patients. There were 66 deaths from all causes. All‐cause and cardiovascular mortality were significantly higher in patients with 1y‐WRF (log‐rank P<0.0001 and P<0.0001, respectively) according to Kaplan–Meier analysis. In a multivariate Cox proportional hazards model, 1y‐WRF was a strong and independent predictor of all‐cause and cardiovascular mortality. Hemoglobin and B‐type natriuretic peptide at discharge, as well as left ventricular ejection fraction <50%, were independent predictors of 1y‐WRF. Conclusions In patients with ADHF, 1y‐WRF is a strong predictor of all‐cause and cardiovascular mortality. PMID:25370599

  19. Worsening of renal function during 1 year after hospital discharge is a strong and independent predictor of all-cause mortality in acute decompensated heart failure.

    PubMed

    Ueda, Tomoya; Kawakami, Rika; Sugawara, Yu; Okada, Sadanori; Nishida, Taku; Onoue, Kenji; Soeda, Tsunenari; Okayama, Satoshi; Takeda, Yukiji; Watanabe, Makoto; Kawata, Hiroyuki; Uemura, Shiro; Saito, Yoshihiko

    2014-11-04

    Renal impairment is a common comorbidity and the strongest risk factor for poor prognosis in acute decompensated heart failure (ADHF). In clinical practice, renal function is labile during episodes of ADHF, and often worsens after discharge. The significance of worsening of renal function (WRF) after discharge has not been investigated as extensively as baseline renal function at admission or WRF during hospitalization. Among 611 consecutive patients with ADHF emergently admitted to our hospital, 233 patients with 3 measurements of serum creatinine (SCr) level measurements (on admission, at discharge, and 1 year after discharge) were included in the present study. Patients were divided into 2 groups according to the presence or absence of WRF at 1 year after discharge (1y-WRF), defined as an absolute increase in SCr >0.3 mg/dL (>26.5 μmol/L) plus a ≥25% increase in SCr at 1 year after discharge compared to the SCr value at discharge. All-cause and cardiovascular mortality were assessed as adverse outcomes. During a mean follow-up of 35.4 months, 1y-WRF occurred in 48 of 233 patients. There were 66 deaths from all causes. All-cause and cardiovascular mortality were significantly higher in patients with 1y-WRF (log-rank P<0.0001 and P<0.0001, respectively) according to Kaplan-Meier analysis. In a multivariate Cox proportional hazards model, 1y-WRF was a strong and independent predictor of all-cause and cardiovascular mortality. Hemoglobin and B-type natriuretic peptide at discharge, as well as left ventricular ejection fraction <50%, were independent predictors of 1y-WRF. In patients with ADHF, 1y-WRF is a strong predictor of all-cause and cardiovascular mortality. © 2014 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

  20. Liquefaction, flow, and associated ground failure

    USGS Publications Warehouse

    Youd, T. Leslie

    1973-01-01

    Ambiguities in the use of the term liquefaction and in defining the relation between liquefaction and ground failure have led to encumbered communication between workers in various fields and between specialists in the same field, and the possibility that evaluations of liquefaction potential could be misinterpreted or misapplied. Explicit definitions of liquefaction and related concepts are proposed herein. These definitions, based on observed laboratory behavior, are then used to clarify the relation between liquefaction and ground failure. Soil liquefaction is defined as the transformation of a granular material from a solid into a liquefied state as a consequence of increased pore-water pressures. This definition avoids confusion between liquefaction and possible flow-failure conditions after liquefaction. Flow-failure conditions are divided into two types: (1) unlimited flow if pore-pressure reductions caused by dilatancy during flow deformation are not sufficient to solidify the material and thus arrest flow, and (2) limited flow if they are sufficient to solidify the material after a finite deformation. After liquefaction in the field, unlimited flow commonly leads to flow landslides, whereas limited flow leads at most to lateral-spreading landslides. Quick-condition failures such as loss of bearing capacity form a third type of ground failure associated with liquefaction.

Top