Study of application of space telescope science operations software for SIRTF use

NASA Technical Reports Server (NTRS)

Dignam, F.; Stetson, E.; Allendoerfer, W.

1985-01-01

The design and development of the Space Telescope Science Operations Ground System (ST SOGS) was evaluated to compile a history of lessons learned that would benefit NASA's Space Infrared Telescope Facility (SIRTF). Forty-nine specific recommendations resulted and were categorized as follows: (1) requirements: a discussion of the content, timeliness and proper allocation of the system and segment requirements and the resulting impact on SOGS development; (2) science instruments: a consideration of the impact of the Science Instrument design and data streams on SOGS software; and (3) contract phasing: an analysis of the impact of beginning the various ST program segments at different times. Approximately half of the software design and source code might be useable for SIRTF. Transportability of this software requires, at minimum, a compatible DEC VAX-based architecture and VMS operating system, system support software similar to that developed for SOGS, and continued evolution of the SIRTF operations concept and requirements such that they remain compatible with ST SOGS operation.

Preparation and Compatibility Evaluation of Polypropylene/High Density Polyethylene Polyblends

PubMed Central

Lin, Jia-Horng; Pan, Yi-Jun; Liu, Chi-Fan; Huang, Chien-Lin; Hsieh, Chien-Teng; Chen, Chih-Kuang; Lin, Zheng-Ian; Lou, Ching-Wen

2015-01-01

This study proposes melt-blending polypropylene (PP) and high density polyethylene (HDPE) that have a similar melt flow index (MFI) to form PP/HDPE polyblends. The influence of the content of HDPE on the properties and compatibility of polyblends is examined by using a tensile test, flexural test, Izod impact test, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), polarized light microscopy (PLM), and X-ray diffraction (XRD). The SEM results show that PP and HDPE are incompatible polymers with PP being a continuous phase and HDPE being a dispersed phase. The FTIR results show that the combination of HDPE does not influence the chemical structure of PP, indicating that the polyblends are made of a physical blending. The DSC and XRD results show that PP and HDPE are not compatible, and the combination of HDPE is not correlated with the crystalline structure and stability of PP. The PLM results show that the combination of HDPE causes stacking and incompatibility between HDPE and PP spherulites, and PP thus has incomplete spherulite morphology and a smaller spherulite size. However, according to mechanical property test results, the combination of HDPE improves the impact strength of PP. PMID:28793750

Preparation and Compatibility Evaluation of Polypropylene/High Density Polyethylene Polyblends.

PubMed

Lin, Jia-Horng; Pan, Yi-Jun; Liu, Chi-Fan; Huang, Chien-Lin; Hsieh, Chien-Teng; Chen, Chih-Kuang; Lin, Zheng-Ian; Lou, Ching-Wen

2015-12-17

This study proposes melt-blending polypropylene (PP) and high density polyethylene (HDPE) that have a similar melt flow index (MFI) to form PP/HDPE polyblends. The influence of the content of HDPE on the properties and compatibility of polyblends is examined by using a tensile test, flexural test, Izod impact test, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), polarized light microscopy (PLM), and X-ray diffraction (XRD). The SEM results show that PP and HDPE are incompatible polymers with PP being a continuous phase and HDPE being a dispersed phase. The FTIR results show that the combination of HDPE does not influence the chemical structure of PP, indicating that the polyblends are made of a physical blending. The DSC and XRD results show that PP and HDPE are not compatible, and the combination of HDPE is not correlated with the crystalline structure and stability of PP. The PLM results show that the combination of HDPE causes stacking and incompatibility between HDPE and PP spherulites, and PP thus has incomplete spherulite morphology and a smaller spherulite size. However, according to mechanical property test results, the combination of HDPE improves the impact strength of PP.

Adapting My Weather Impacts Decision Aid (MyWIDA) to Additional Web Application Server Technologies

DTIC Science & Technology

2015-08-01

Oracle. Further, some datatypes that are used with HSQLDB are not compatible with Oracle. Most notably, the VARBINARY datatype is not compatible...with Oracle, and instead was replaced with the Binary Large Object (BLOB) datatype . Oracle additionally has a different implementation of primary keys

Oxygen Compatibility Testing of Composite Materials

NASA Technical Reports Server (NTRS)

Graf, Neil A.; Hudgins, Richard J.; McBain, Michael

2000-01-01

The development of polymer composite liquid oxygen LO2 tanks is a critical step in creating the next generation of launch vehicles. Future launch vehicles need to minimize the gross liftoff weight (GLOW), which is possible due to the 25%-40% reduction in weight that composite materials could provide over current aluminum technology. Although a composite LO2 tank makes these weight savings feasible, composite materials have not historically been viewed as "LO2 compatible." To be considered LO2 compatible, materials must be selected that will resist any type of detrimental, combustible reaction when exposed to usage environments. This is traditionally evaluated using a standard set of tests. However, materials that do not pass the standard tests can be shown to be safe for a particular application. This paper documents the approach and results of a joint NASA/Lockheed Martin program to select and verify LO2 compatible composite materials for liquid oxygen fuel tanks. The test approach developed included tests such as mechanical impact, particle impact, puncture, electrostatic discharge, friction, and pyrotechnic shock. These tests showed that composite liquid oxygen tanks are indeed feasible for future launch vehicles.

Impact of HLA compatibility on lung transplant survival and evidence for an HLA restriction phenomenon: a collaborative transplant study report.

PubMed

Opelz, Gerhard; Süsal, Caner; Ruhenstroth, Andrea; Döhler, Bernd

2010-10-27

Data concerning the impact of human leukocyte antigen (HLA) compatibility on lung transplant survival rates are limited. Using the Collaborative Transplant Study database, 5-year graft outcome according to HLA mismatch was examined in 8020 deceased donor lung transplants performed during 1989 to 2009. Graft survival rates showed a stepwise decrease as the combined number of HLA-A+B+DR mismatches increased from one to six (P<0.001). Surprisingly, the 28 grafts with 0 mismatches at all 3 loci had a 1-year survival rate of only 49.7%, significantly lower than for 1, 2, 3, 4, 5, or 6 mismatches (P=0.002, <0.001, <0.001, <0.001, 0.002, and 0.003, respectively). Multivariate regression analysis confirmed that, paradoxically, transplantation of grafts with zero HLA-A+B+DR mismatches was associated with a 19% increase in relative risk of failure. Donor lung preservation for up to 12 hr was not associated with inferior graft survival versus shorter preservation times (P=0.60). Our data show that a high number of HLA mismatches or zero mismatches impacts unfavorably on lung transplant survival.

Interference and Compatibility Studies Between Satellite Service Systems and Systems Using High Altitude Platform Stations

NASA Astrophysics Data System (ADS)

Milas, Vasilis; Koletta, Maria; Constantinou, Philip

2003-07-01

This paper provides the results of interference and compatibility studies in order to assess the sharing conditions between Fixed Satellite Service (FSS) and Fixed Service provided by High Altitude Platform Stations (HAPS) in the same operational frequency bands and discusses the most important operational parameters that have an impact on the interference calculations. To characterize interference phenomena between the two systems carrier to interference (C/I) ratios are evaluated. Simulation results under the scenario of a realistic deployment of HAPS and the use of different satellite configurations are presented. An interesting result derived from the simulations is that FSS/GSO Earth Stations and HAPS ground stations may coexist in the HAPS coverage area under certain considerations.

An Environmental Impact Assessment of Perfluorocarbon Thermal Working Fluid Use On Board Crewed Spacecraft

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Arnold, William a.

2006-01-01

The design and operation of crewed spacecraft requires identifying and evaluating chemical compounds that may present reactivity and compatibility risks with the environmental control and life support (ECLS) system. Such risks must be understood so that appropriate design and operational controls, including specifying containment levels, can be instituted or an appropriate substitute material selected. Operational experience acquired during the International Space Station (ISS) program has found that understanding ECLS system and environmental impact presented by thermal control system working fluids is imperative to safely operating any crewed space exploration vehicle. Perfluorocarbon fluids are used as working fluids in thermal control fluid loops on board the ISS. Also, payload hardware developers have identified perfluorocarbon fluids as preferred thermal control working fluids. Interest in using perfluorocarbon fluids as thermal control system working fluids for future crewed space vehicles and outposts is high. Potential hazards associated with perfluorocarbon fluids are discussed with specific attention given to engineering assessment of ECLS system compatibility, compatibility testing results, and spacecraft environmental impact. Considerations for perfluorocarbon fluid use on crewed spacecraft and outposts are summarized.

Association between mitochondrial DNA haplotype compatibility and increased efficiency of bovine intersubspecies cloning.

PubMed

Yan, Hao; Yan, Zhonghai; Ma, Qingwen; Jiao, Fei; Huang, Shuzhen; Zeng, Fanyi; Zeng, Yitao

2011-01-01

Reconstructed embryos derived from intersubspecies somatic cell nuclear transfer (SCNT) have poorer developmental potential than those from intrasubspecies SCNT. Based on our previous study that Holstein dairy bovine (HD) mitochondrial DNA (mtDNA) haplotype compatibility between donor karyoplast and recipient cytoplast is crucial for SCNT embryo development, we performed intersubspecies SCNT using HD as donor karyoplast and Luxi yellow heifer (LY) as recipient cytoplast according to mtDNA haplotypes determined by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis. The results demonstrated that intersubspecies mtDNA homotype SCNT embryos had higher pre- and post-implantation developmental competence than intrasubspecies mtDNA heterotype embryos as well as improved blastocyst reprogramming status, including normal H3K9 dimethylation pattern and promoter hypomethylation of pluripotent genes such as Oct4 and Sox2, suggesting that intersubspecies SCNT using LY oocytes maintains HD cloning efficiency and may reprogram HD nuclei to develop into a normal cloned animal ultimately. Our results indicated that karyoplast-cytoplast interactions and mtDNA haplotype compatibility may affect bovine intersubspecies SCNT efficiency. This study on bovine intersubspecies SCNT is valuable for understanding the mechanisms of mtDNA haplotype compatibility between karyoplast and cytoplast impacting the bovine SCNT efficiency, and provides an alternative and economic resource for HD cloning. Copyright © 2011. Published by Elsevier Ltd.

Compatibility of melt-processed zein blends with methylenediphenyl 4,4'-diisocyanate-thermal, mechanical and physical properties

USDA-ARS?s Scientific Manuscript database

Corn zein was melt-processed with methylenediphenyl 4,4'-diisocyanate (MDI) using triethylamine (TEA) as catalyst. The objective is to construct a melt-processed, compatible blend of zein with MDI that can be used as a building block for generating bio-based thermoplastics. The impact of cross-linki...

The impact of Wolbachia, male age and mating history on cytoplasmic incompatibility and sperm transfer in Drosophila simulans.

PubMed

Awrahman, Z A; Champion de Crespigny, F; Wedell, N

2014-01-01

Most insects harbour a variety of maternally inherited endosymbionts, the most widespread being Wolbachia pipientis that commonly induce cytoplasmic incompatibility (CI) and reduced hatching success in crosses between infected males and uninfected females. High temperature and increasing male age are known to reduce the level of CI in a variety of insects. In Drosophila simulans, infected males have been shown to mate at a higher rate than uninfected males. By examining the impact of mating rate independent of age, this study investigates whether a high mating rate confers an advantage to infected males through restoring their compatibility with uninfected females over and above the effect of age. The impact of Wolbachia infection, male mating rate and age on the number of sperm transferred to females during copulation and how it relates to CI expression was also assessed. As predicted, we found that reproductive compatibility was restored faster in males that mate at higher rate than that of low mating and virgin males, and that the effect of mating history was over and above the effect of male age. Nonvirgin infected males transferred fewer sperm than uninfected males during copulation, and mating at a high rate resulted in the transfer of fewer sperm per mating irrespective of infection status. These results indicate that the advantage to infected males of mating at a high rate is through restoration of reproductive compatibility with uninfected females, whereas uninfected males appear to trade off the number of sperm transferred per mating with female encounter rate and success in sperm competition. This study highlights the importance Wolbachia may play in sexual selection by affecting male reproductive strategies. © 2013 The Authors. Journal of Evolutionary Biology © 2013 European Society For Evolutionary Biology.

Solar Energy Development Impacts on Land-Cover Change and Protected Areas

NASA Astrophysics Data System (ADS)

Hoffacker, M. K.; Hernandez, R. R.; Murphy-Mariscal, M. L.; Wu, G. C.; Allen, M. F.

2015-12-01

Decisions determining the use of land for energy are of exigent concern as land scarcity, the need for ecosystem services, and demands for energy generation have concomitantly increased globally. Utility-scale solar energy (USSE; i.e., ≥ 1 megawatt [MW]) development requires large quantities of space and land; however, studies quantifying the effect of USSE on land-cover change and protected areas are limited. We assessed siting impacts of >160 USSE installations by technology type (photovoltaic [PV] vs. concentrating solar power [CSP]), area (km2), and capacity (MW) within the global solar hotspot of the state of California (USA). Additionally, we utilized the Carnegie Energy and Environmental Compatibility Model, a multiple criteria model, to quantify each installation according to environmental and technical compatibility. Lastly, we evaluated installations according to their proximity to protected areas, including inventoried roadless areas, endangered and threatened species habitat, and federally protected areas. We found the plurality of USSE (6,995 MW) in California is sited in shrub- and scrublands, comprising 375 km2 of land-cover change. Twenty-eight percent of USSE installations are located in croplands and pastures, comprising 155 km2 of change. Less than 15% of USSE installations are sited in compatible areas. The majority of incompatible USSE power plants are sited far from existing transmission infrastructure and all USSE installations average at most seven and five km from protected areas, for PV and CSP, respectively. Where energy, food, and conservation goals intersect, environmental compatibility can be achieved when resource opportunities, constraints, and trade-offs are integrated into siting decisions.

Solar energy development impacts on land cover change and protected areas.

PubMed

Hernandez, Rebecca R; Hoffacker, Madison K; Murphy-Mariscal, Michelle L; Wu, Grace C; Allen, Michael F

2015-11-03

Decisions determining the use of land for energy are of exigent concern as land scarcity, the need for ecosystem services, and demands for energy generation have concomitantly increased globally. Utility-scale solar energy (USSE) [i.e., ≥ 1 megawatt (MW)] development requires large quantities of space and land; however, studies quantifying the effect of USSE on land cover change and protected areas are limited. We assessed siting impacts of >160 USSE installations by technology type [photovoltaic (PV) vs. concentrating solar power (CSP)], area (in square kilometers), and capacity (in MW) within the global solar hot spot of the state of California (United States). Additionally, we used the Carnegie Energy and Environmental Compatibility model, a multiple criteria model, to quantify each installation according to environmental and technical compatibility. Last, we evaluated installations according to their proximity to protected areas, including inventoried roadless areas, endangered and threatened species habitat, and federally protected areas. We found the plurality of USSE (6,995 MW) in California is sited in shrublands and scrublands, comprising 375 km(2) of land cover change. Twenty-eight percent of USSE installations are located in croplands and pastures, comprising 155 km(2) of change. Less than 15% of USSE installations are sited in "Compatible" areas. The majority of "Incompatible" USSE power plants are sited far from existing transmission infrastructure, and all USSE installations average at most 7 and 5 km from protected areas, for PV and CSP, respectively. Where energy, food, and conservation goals intersect, environmental compatibility can be achieved when resource opportunities, constraints, and trade-offs are integrated into siting decisions.

Oxygen Compatibility Testing of Composite Materials

NASA Technical Reports Server (NTRS)

Engel, Carl D.; Watkins, Casey N.

2006-01-01

Composite materials offer significant weight-saving potential for aerospace applications in propellant and oxidizer tanks. This application for oxygen tanks presents the challenge of being oxygen compatible in addition to complying with the other required material characteristics. This effort reports on the testing procedures and data obtained in examining and selecting potential composite materials for oxygen tank usage. Impact testing of composites has shown that most of these materials initiate a combustion event when impacted at 72 ft-lbf in the presence of liquid oxygen, though testing has also shown substantial variability in reaction sensitivities to impact. Data for screening of 14 potential composites using the Bruceton method is given herein and shows that the 50-percent reaction frequencies range from 17 to 67 ft-lbf. The pressure and temperature rises for several composite materials were recorded to compare the energy releases as functions of the combustion reactions with their respective reaction probabilities. The test data presented are primarily for a test pressure of 300 psia in liquid oxygen. The impact screening process is compared with oxygen index and autogenous ignition test data for both the composite and the basic resin. The usefulness of these supplemental tests in helping select the most oxygen compatible materials is explored. The propensity for mechanical impact ignition of the composite compared with the resin alone is also examined. Since an ignition-free composite material at the peak impact energy of 72 ft-lbf has not been identified, composite reactivity must be characterized over the impact energy level and operating pressure ranges to provide data for hazard analyses in selecting the best potential material for liquid tank usage.

C3I system modification and EMC (electromagnetic compatibility) methodology, volume 1

NASA Astrophysics Data System (ADS)

Wilson, J. L.; Jolly, M. B.

1984-01-01

A methodology (i.e., consistent set of procedures) for assessing the electromagnetic compatibility (EMC) of RF subsystem modifications on C3I aircraft was generated during this study (Volume 1). An IEMCAP (Intrasystem Electromagnetic Compatibility Analysis Program) database for the E-3A (AWACS) C3I aircraft RF subsystem was extracted to support the design of the EMC assessment methodology (Volume 2). Mock modifications were performed on the E-3A database to assess, using a preliminary form of the methodology, the resulting EMC impact. Application of the preliminary assessment methodology to modifications in the E-3A database served to fine tune the form of a final assessment methodology. The resulting final assessment methodology is documented in this report in conjunction with the overall study goals, procedures, and database. It is recommended that a similar EMC assessment methodology be developed for the power subsystem within C3I aircraft. It is further recommended that future EMC assessment methodologies be developed around expert systems (i.e., computer intelligent agents) to control both the excruciating detail and user requirement for transparency.

Multivariate analysis of the immune response to a vaccine as an alternative to the repetition of animal challenge studies for vaccines with demonstrated efficacy.

PubMed

Chapat, Ludivine; Hilaire, Florence; Bouvet, Jérome; Pialot, Daniel; Philippe-Reversat, Corinne; Guiot, Anne-Laure; Remolue, Lydie; Lechenet, Jacques; Andreoni, Christine; Poulet, Hervé; Day, Michael J; De Luca, Karelle; Cariou, Carine; Cupillard, Lionel

2017-07-01

The assessment of vaccine combinations, or the evaluation of the impact of minor modifications of one component in well-established vaccines, requires animal challenges in the absence of previously validated correlates of protection. As an alternative, we propose conducting a multivariate analysis of the specific immune response to the vaccine. This approach is consistent with the principles of the 3Rs (Refinement, Reduction and Replacement) and avoids repeating efficacy studies based on infectious challenges in vivo. To validate this approach, a set of nine immunological parameters was selected in order to characterize B and T lymphocyte responses against canine rabies virus and to evaluate the compatibility between two canine vaccines, an inactivated rabies vaccine (RABISIN ® ) and a combined vaccine (EURICAN ® DAPPi-Lmulti) injected at two different sites in the same animals. The analysis was focused on the magnitude and quality of the immune response. The multi-dimensional picture given by this 'immune fingerprint' was used to assess the impact of the concomitant injection of the combined vaccine on the immunogenicity of the rabies vaccine. A principal component analysis fully discriminated the control group from the groups vaccinated with RABISIN ® alone or RABISIN ® +EURICAN ® DAPPi-Lmulti and confirmed the compatibility between the rabies vaccines. This study suggests that determining the immune fingerprint, combined with a multivariate statistical analysis, is a promising approach to characterizing the immunogenicity of a vaccine with an established record of efficacy. It may also avoid the need to repeat efficacy studies involving challenge infection in case of minor modifications of the vaccine or for compatibility studies. Copyright © 2017 Elsevier B.V. All rights reserved.

The Sudbury-Serenitatis analogy and 'so-called' pristine nonmare rocks

NASA Technical Reports Server (NTRS)

Warren, Paul H.

1992-01-01

The Serenitatis Basin is the one lunar basin from which we confidently identify a suite of samples as pieces of the impact melt sheet: the distinctive Apollo 17 noritic breccias. Recent studies of the Sudbury Complex indicate that its 'irruptive' is almost entirely of impact-melt origin, making it the closest terrestrial analog to the Serenitatis melt sheet. Any attempt to model the evolution of the Moon's crust should be compatible with the relatively well-understood Sudbury Complex. However, the Sudbury-Moon analogy might be a misleading oversimplification, if applied too rigidly. The cause of evolutionary differences between the Serenitatis impact melt and the Sudbury impact melt is discussed.

In Pursuit of the MD: The Impact of Role Models, Identity Compatibility, and Belonging Among Undergraduate Women

PubMed Central

Levy, Sheri R.; London, Bonita; Lobel, Marci; Bazile, Cartney

2014-01-01

Women continue to face gender-related challenges in the medical field in places around the world where it has traditionally been male-dominated, including in the U.S. In an online experimental study with women attending a mid-sized public university in the Northeastern U.S. (N= 55) who were interested in pursuing a pre-medical track (being pre-med) as undergraduates, we explored the mechanisms involved in undergraduate women’s pursuit of a career as a physician, focusing on three factors: exposure to successful female physician role models, perceived identity compatibility between being a woman and being pre-med, and sense of belonging in pre-med. Participants were randomly assigned to an experimental condition in which they were exposed to information about successful female physicians, or to a control condition in which no information about female physicians was provided. First, as hypothesized, participants exposed to successful female physicians reported higher perceived identity compatibility, sense of belonging, and interest in a medical career compared to those in the control condition. Second, also as hypothesized, perceived identity compatibility mediated the effect of role models on sense of belonging, and sense of belonging mediated the relationship between perceived identity compatibility and interest in a medical career. This study highlights three key factors in women’s pursuit of a career as a physician and the process through which these factors may operate. Findings support the use of role models to set a positive psychosocial process in motion that can support women’s persistence in medicine. PMID:24497671

Nomenclature associated with chemical characterization of and compatibility evaluations for medical product delivery systems.

PubMed

Jenke, Dennis R

2003-01-01

Delivery systems are used to store, contain, and/or administer liquid pharmaceutical products. Gaining an understanding of the chemical composition of such a delivery system is necessary with respect to effective system development, registration, and production. Additionally, the ability of the delivery system to impact the chemical composition of the contacted product may define the safety and/or efficacy of the product. Assessing the compatibility of the delivery system and the product is thus both necessary and desirable. The nomenclature associated with compatibility assessments has not been standardized, oftimes leading to conflicting or confusing information. This manuscript puts forth a nomenclature which classifies those chemical entities which participate in the system/product interaction and delineates the various extraction strategies which may be used in compatibility assessments.

Impact of cosmic inhomogeneities on SNe observations

NASA Astrophysics Data System (ADS)

Kainulainen, Kimmo; Marra, Valerio

2010-06-01

We study the impact of cosmic inhomogeneities on the interpretation of SNe observations. We build an inhomogeneous universe model that can confront supernova data and yet is reasonably well compatible with the Copernican Principle. Our model combines a relatively small local void, that gives apparent acceleration at low redshifts, with a meatball model that gives sizeable lensing (dimming) at high redshifts. Together these two elements, which focus on different effects of voids on the data, allow the model to mimic the concordance model.

Impact of propulsion system R and D on electric vehicle performance and cost

NASA Technical Reports Server (NTRS)

Schwartz, H. J.; Gordan, A. L.

1980-01-01

The efficiency, weight, and manufacturing cost of the propulsion subsystem (motor, motor controller, transmission, and differential, but excluding the battery) are major factors in the purchase price and cost of ownership of a traffic-compatible electric vehicle. The relative impact of each was studied, and the conclusions reached are that propulsion system technology advances can result in a major reduction of the sticker price of an electric vehicle and a smaller, but significant, reduction in overall cost of ownership.

Supercritical CO2 fluid-foaming of polymers to increase porosity: a method to improve the mechanical and biocompatibility characteristics for use as a potential alternative to allografts in impaction bone grafting?

PubMed

Tayton, Edward; Purcell, M; Aarvold, A; Smith, J O; Kalra, S; Briscoe, A; Shakesheff, K; Howdle, S M; Dunlop, D G; Oreffo, R O C

2012-05-01

Disease transmission, availability and cost of allografts have resulted in significant efforts to find an alternative for use in impaction bone grafting (IBG). Recent studies identified two polymers with both structural strength and biocompatibility characteristics as potential replacements. The aim of this study was to assess whether increasing the polymer porosity further enhanced the mechanical and cellular compatibility characteristics for use as an osteogenic biomaterial alternative to allografts in IBG. Solid and porous poly(DL-lactide) (P(DL)LA) and poly(DL-lactide-co-glycolide) (P(DL)LGA) scaffolds were produced via melt processing and supercritical CO(2) foaming, and the differences characterized using scanning electron microscopy (SEM). Mechanical testing included milling and impaction, with comparisons made using a shear testing rig as well as a novel agitation test for cohesion. Cellular compatibility tests for cell number, viability, and osteogenic differentiation using WST-1 assays, fluorostaining, and ALP assays were determined following 14 day culture with skeletal stem cells. SEM showed excellent porosity throughout both of the supercritical-foam-produced polymer scaffolds, with pores between 50 and 200 μm. Shear testing showed that the porous polymers exceeded the shear strength of allograft controls (P<0.001). Agitation testing showed greater cohesion between the particles of the porous polymers (P<0.05). Cellular studies showed increased cell number, viability, and osteogenic differentiation on the porous polymers compared to solid block polymers (P<0.05). The use of supercritical CO(2) to generate porous polymeric biodegradable scaffolds significantly improves the cellular compatibility and cohesion observed compared to non-porous counterparts, without substantial loss of mechanical shear strength. These improved characteristics are critical for clinical translation as a potential osteogenic composite for use in IBG. Copyright © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Technical Basis for Electromagnetic Compatibility Regulatory Guidance Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ewing, Paul D.; Korsah, Kofi; Harrison, Thomas J.

2016-03-01

The objective of this report is to serve as the technical basis document for the next, planned revision of this RG that highlights and provides the rationale for the recommended changes. The structure of this document follows and summarizes the several assessment activities undertaken during the course of this project to evaluate new and updated electromagnetic compatibility (EMC) standards, testing methods and limits, and relevant technology developments being incorporated into plant activities that may have EMI/RFI implications, as well as other specific issues, including impacts of electrostatic discharge (ESD) on safety equipment and impacts on increased usage of wireless devicesmore » in nuclear power plants.« less

Compatibility study of trans-1,4,5,8-tetranitro-1,4,5,8-tetraazadecalin (TNAD) with some energetic components and inert materials.

PubMed

Yan, Qi-Long; Xiao-Jiang, Li; La-Ying, Zhang; Ji-Zhen, Li; Hong-Li, Li; Zi-Ru, Liu

2008-12-30

The compatibility of trans-1,4,5,8-tetranitro-1,4,5,8-tetraazadecalin (TNAD) with some energetic components and inert materials of solid propellants was studied by using the pressure DSC method where, cyclotetramethylenetetranitroamine (HMX), cyclotrimethylenetrinitramine (RDX), 1,4-dinitropiperazine (DNP), 1.25/1-NC/NG mixture, lead 3-nitro-1,2,4-triazol-5-onate (NTO-Pb), aluminum powder (Al, particle size=13.6microm) and N-nitrodihydroxyethylaminedinitrate (DINA) were used as energetic components and polyethylene glycol (PEG), polyoxytetramethylene-co-oxyethylene (PET), addition product of hexamethylene diisocyanate and water (N-100), 2-nitrodianiline (2-NDPA), 1,3-dimethyl-1,3-diphenyl urea (C2), carbon black (C.B.), aluminum oxide (Al2O3), cupric 2,4-dihydroxy-benzoate (beta-Cu), cupric adipate (AD-Cu) and lead phthalate (phi-Pb) were used as inert materials. It was concluded that the binary systems of TNAD with NTO-Pb, RDX, PET and Al powder are compatible, and systems of TNAD with DINA and HMX are slightly sensitive, and with 2-NDPA, phi-Pb, beta-Cu, AD-Cu and Al2O3 are sensitive, and with PEG, N-100, C2 and C.B. are incompatible. The impact and friction sensitivity data of the TNAD and TNAD in combination with the other energetic materials under present study was also obtained, and there was no consequential affiliation between sensitivity and compatibility.

Compatible Spatial Discretizations for Partial Differential Equations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnold, Douglas, N, ed.

From May 11--15, 2004, the Institute for Mathematics and its Applications held a hot topics workshop on Compatible Spatial Discretizations for Partial Differential Equations. The numerical solution of partial differential equations (PDE) is a fundamental task in science and engineering. The goal of the workshop was to bring together a spectrum of scientists at the forefront of the research in the numerical solution of PDEs to discuss compatible spatial discretizations. We define compatible spatial discretizations as those that inherit or mimic fundamental properties of the PDE such as topology, conservation, symmetries, and positivity structures and maximum principles. A wide varietymore » of discretization methods applied across a wide range of scientific and engineering applications have been designed to or found to inherit or mimic intrinsic spatial structure and reproduce fundamental properties of the solution of the continuous PDE model at the finite dimensional level. A profusion of such methods and concepts relevant to understanding them have been developed and explored: mixed finite element methods, mimetic finite differences, support operator methods, control volume methods, discrete differential forms, Whitney forms, conservative differencing, discrete Hodge operators, discrete Helmholtz decomposition, finite integration techniques, staggered grid and dual grid methods, etc. This workshop seeks to foster communication among the diverse groups of researchers designing, applying, and studying such methods as well as researchers involved in practical solution of large scale problems that may benefit from advancements in such discretizations; to help elucidate the relations between the different methods and concepts; and to generally advance our understanding in the area of compatible spatial discretization methods for PDE. Particular points of emphasis included: + Identification of intrinsic properties of PDE models that are critical for the fidelity of numerical simulations. + Identification and design of compatible spatial discretizations of PDEs, their classification, analysis, and relations. + Relationships between different compatible spatial discretization methods and concepts which have been developed; + Impact of compatible spatial discretizations upon physical fidelity, verification and validation of simulations, especially in large-scale, multiphysics settings. + How solvers address the demands placed upon them by compatible spatial discretizations. This report provides information about the program and abstracts of all the presentations.« less

The Impact of Learning Styles on Achievement in Principles of Microeconomics: A Natural Experiment

ERIC Educational Resources Information Center

Terregrossa, Ralph; Englander, Fred; Englander, Valerie

2009-01-01

This study investigates how a natural experiment occurring in the teaching of principles of microeconomics allows a test of the Dunn and Dunn learning styles model (Dunn & Griggs, 2000). The material for the first exam, based on essential definitions and theoretical foundations, was taught in a conventional, inductive style, more compatible with…

Experimental Investigation of the Shuttle Transportation System Composite Overwrapped Pressure Vessels for Stress Rupture Life

NASA Technical Reports Server (NTRS)

Greene, Nathanael; Saulsberry, Regor; Yoder, Tommy; Forsyth, Brad; Carillo, Marlene; Thesken, John

2006-01-01

A viewgraph presentation describing stress rupture testing on Composite Overwrapped Pressure Vessels (COPV) is shown. The topics include: 1) Purpose for Testing; 2) NASA WSTF COPV Test Program; 3) NASA WSTF Test Facilities; 4) COPV Impact Study; 5) Fluids Compatibility Testing; 6) Stress Rupture Testing; and 7) COPV Lifting.

Understanding the compatibility of multiple uses on forest land: a survey of multiresource research with application to the Pacific Northwest.

Treesearch

James A. Stevens; Claire A. Montgomery

2002-01-01

In this report, multiresource research is described as it has coevolved with forest policy objectives—from managing for single or dominant uses, to managing for compatible multiple forest uses, to sustaining ecosystem health on the forest. The evolution of analytical methods for multiresource research is traced from impact analysis to multiresource modeling, and...

75 FR 30902 - Supplemental Draft Environmental Impact Statement; U.S. 231 Dubois County, IN

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

... roadway network but serves approximately 40 percent of the nation's highway travel. U.S. 231 is also a part of the National Truck Network, a national network of highways that allows the passage of trucks of... farmland, sensitive biological species and habitat, land use compatibility impacts, impacts to agricultural...

Cooperative control of blood compatibility and re-endothelialization by immobilized heparin and substrate topography.

PubMed

Ding, Yonghui; Yang, Meng; Yang, Zhilu; Luo, Rifang; Lu, Xiong; Huang, Nan; Huang, Pingbo; Leng, Yang

2015-03-01

A wide variety of environmental cues provided by the extracellular matrix, including biophysical and biochemical cues, are responsible for vascular cell behavior and function. In particular, substrate topography and surface chemistry have been shown to regulate blood and vascular compatibility individually. The combined impact of chemical and topographic cues on blood and vascular compatibility, and the interplay between these two types of cues, are subjects that are currently being explored. In the present study, a facile polydopamine-mediated approach is introduced for immobilization of heparin on topographically patterned substrates, and the combined effects of these cues on blood compatibility and re-endothelialization are systematically investigated. The results show that immobilized heparin and substrate topography cooperatively modulate anti-coagulation activity, endothelial cell (EC) attachment, proliferation, focal adhesion formation and endothelial marker expression. Meanwhile, the substrate topography is the primary determinant of cell alignment and elongation, driving in vivo-like endothelial organization. Importantly, combining immobilized heparin with substrate topography empowers substantially greater competitive ability of ECs over smooth muscle cells than each cue individually. Moreover, a model is proposed to elucidate the cooperative interplay between immobilized heparin and substrate topography in regulating cell behavior. Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

An MR-compatible neonatal incubator.

PubMed

Paley, M N J; Hart, A R; Lait, M; Griffiths, P D

2012-07-01

To develop a neonatal MR-compatible incubator for transporting babies between a neonatal intensive care unit and an MRI unit that is within the same hospital but geographically separate. The system was strapped to a standard MR-compatible patient trolley, which provides space for resuscitation outside the incubator. A constant-temperature exothermic heat pad was used to maintain temperature together with a logging fluoro-optic temperature monitor and alarm system. The system has been designed to accommodate standard knee-sized coils from the major MR manufacturers. The original incubator was constructed from carbon fibre, but this required modification to prevent radiofrequency shading artefacts due to the conducting properties of the carbon fibre. A high-tensile polyester material was used, which combined light weight with high impact strength. The system could be moved onto the patient bed with the coils and infant in place by one technologist. Studies in eight neonatal patients produced high quality 1.5 T MR images with low motion artefacts. The incubator should also be compatible with imaging in 3 T MR systems, although further work is required to establish this. Images were acquired using both rapid and high-resolution sequences, including three-dimensional volumes, proton spectra and diffusion weighting. The incubator provides a safe, quiet environment for neonates during transport and imaging, at low cost.

An MR-compatible neonatal incubator

PubMed Central

Paley, M N J; Hart, A R; Lait, M; Griffiths, P D

2012-01-01

Objectives To develop a neonatal MR-compatible incubator for transporting babies between a neonatal intensive care unit and an MRI unit that is within the same hospital but geographically separate. Methods The system was strapped to a standard MR-compatible patient trolley, which provides space for resuscitation outside the incubator. A constant-temperature exothermic heat pad was used to maintain temperature together with a logging fluoro-optic temperature monitor and alarm system. The system has been designed to accommodate standard knee-sized coils from the major MR manufacturers. The original incubator was constructed from carbon fibre, but this required modification to prevent radiofrequency shading artefacts due to the conducting properties of the carbon fibre. A high-tensile polyester material was used, which combined light weight with high impact strength. The system could be moved onto the patient bed with the coils and infant in place by one technologist. Results Studies in eight neonatal patients produced high quality 1.5 T MR images with low motion artefacts. The incubator should also be compatible with imaging in 3 T MR systems, although further work is required to establish this. Images were acquired using both rapid and high-resolution sequences, including three-dimensional volumes, proton spectra and diffusion weighting. Conclusion The incubator provides a safe, quiet environment for neonates during transport and imaging, at low cost. PMID:22167517

Under-diagnosis of mood disorders in Canada.

PubMed

Pelletier, L; O'Donnell, S; Dykxhoorn, J; McRae, L; Patten, S B

2017-08-01

Under-diagnosis of mood disorders occurs worldwide. In this study, we characterized and compared Canadians with symptoms compatible with a mood disorder by diagnosis status; and described the associated health impacts, use of health services and perceived need for care. Respondents to the 2012 Canadian Community Health Survey - Mental Health, a nationally representative sample of Canadians age ≥15 years were assessed for symptoms compatible with mood disorders based on a Canadian adaptation of the World Health Organization Composite International Diagnostic Interview (n = 23 504). Descriptive and multivariate regression analyses were performed. In 2012, an estimated 5.4% (1.5 million) Canadians aged 15 years and older reported symptoms compatible with a mood disorder, of which only half reported having been professionally diagnosed. The undiagnosed individuals were more likely to be younger (mean age: 36.2 v. 41.8), to be single (49.5 v. 32.7%), to have less than a post-secondary graduation (49.8 v. 41.1%) and to have no physical co-morbidities (56.4 v. 35.7%), and less likely to be part of the two lower income quintiles (49.6 v. 62.7%) compared with those with a previous diagnosis. Upon controlling for all socio-demographic and health characteristics, the associations with age and marital status disappeared. While those with a previous diagnosis reported significantly greater health impacts and were more likely to have consulted a health professional for their emotional and mental health problems in the previous 12 months compared with those undiagnosed (79.4 v. 31.0%), about a third of both groups reported that their health care needs were only partially met or not met at all. Mood disorders are prevalent and can profoundly impact the life of those affected, however, their diagnosis remains suboptimal and health care use falls short of apparent needs. Improvements in mental health literacy, help-seeking behaviours and diagnosis are needed. In light of the heterogeneity of mood disorders in terms of symptoms severity, impacts and prognosis, interventions must be tailored accordingly.

SMI Compatible Simulation Scheduler Design for Reuse of Model Complying with Smp Standard

NASA Astrophysics Data System (ADS)

Koo, Cheol-Hea; Lee, Hoon-Hee; Cheon, Yee-Jin

2010-12-01

Software reusability is one of key factors which impacts cost and schedule on a software development project. It is very crucial also in satellite simulator development since there are many commercial simulator models related to satellite and dynamics. If these models can be used in another simulator platform, great deal of confidence and cost/schedule reduction would be achieved. Simulation model portability (SMP) is maintained by European Space Agency and many models compatible with SMP/simulation model interface (SMI) are available. Korea Aerospace Research Institute (KARI) is developing hardware abstraction layer (HAL) supported satellite simulator to verify on-board software of satellite. From above reasons, KARI wants to port these SMI compatible models to the HAL supported satellite simulator. To port these SMI compatible models to the HAL supported satellite simulator, simulation scheduler is preliminary designed according to the SMI standard.

Inventory and analysis of leafy spurge (Euphorbia esula) sites: a feasibility study

Treesearch

Richard E. Francis; Meredith J. Morris; Richard J. Myhre; Daniel L. Noble

1980-01-01

Leafy spurge (Euphorbia esula L.) infests more than 2.25 million acres of agricultural and range lands in the United States and had an economic impact of $10.5 million in 1978 (Noble et al. 1979). The most widespread and heaviest areas of infestation are in the northern and central Great Plains. However, quantitative information and compatible...

Osmolality, pH, and compatibility of selected oral liquid medications with an enteral nutrition product.

PubMed

Klang, Mark; McLymont, Veronica; Ng, Nicole

2013-09-01

When selecting medication for feeding tube administration, the liquid formulation is selected, so as to avoid obstructions that may occur from incompletely crushing a solid dosage form. Liquid medications can present issues of intolerance and compatibility when administered via a feeding tube. A predictor of intolerance is the liquid's osmolarity, and a predicator of compatibility is the liquid's pH value. This study examines 62 liquid formulations for their osmolality, pH, and physical compatibility with enteral nutrition (EN) formulas. These medications were selected as being the most commonly dispensed liquid medications from our outpatient pharmacy department. This study measures osmolality using freezing point depression. Depending on the dose, the osmotic load of a liquid medication may cause cramping and diarrhea. The pH value is predictive of potential interactions with the EN formula. Many drugs are weak bases and require acidic vehicles for optimal stability. The acidic liquids are especially reactive with enteral formulas that contain intact proteins. The result of this interaction can result in an occlusion of the feeding tube as the proteins form a gel-like clog. This study combined the liquid medication directly with the EN formula to determine the potential for feeding tube occlusion. Some drugs formed a solid mass in the test tube immediately, whereas others only presented granules, which may later contribute to obstructing the feeding tube. The prescriber should be aware of the potential impact of their choice in formulation, both in terms of the gastrointestinal tolerance and potential for interaction with coadministered nutrition.

An Improved Approach for Analyzing the Oxygen Compatibility of Solvents and other Oxygen-Flammable Materials for Use in Oxygen Systems

NASA Technical Reports Server (NTRS)

Harper, Susan A.; Juarez, Alfredo; Peralta, Stephen F.; Stoltzfus, Joel; Arpin, Christina Pina; Beeson, Harold D.

2016-01-01

Solvents used to clean oxygen system components must be assessed for oxygen compatibility, as incompatible residue or fluid inadvertently left behind within an oxygen system can pose a flammability risk. The most recent approach focused on solvent ignition susceptibility to assess the flammability risk associated with these materials. Previous evaluations included Ambient Pressure Liquid Oxygen (LOX) Mechanical Impact Testing (ASTM G86) and Autogenous Ignition Temperature (AIT) Testing (ASTM G72). The goal in this approach was to identify a solvent material that was not flammable in oxygen. As environmental policies restrict the available options of acceptable solvents, it has proven difficult to identify one that is not flammable in oxygen. A more rigorous oxygen compatibility approach is needed in an effort to select a new solvent for NASA applications. NASA White Sands Test Facility proposed an approach that acknowledges oxygen flammability, yet selects solvent materials based on their relative oxygen compatibility ranking, similar to that described in ASTM G63-99. Solvents are selected based on their ranking with respect to minimal ignition susceptibility, damage and propagation potential, as well as their relative ranking when compared with other solvent materials that are successfully used in oxygen systems. Test methods used in this approach included ASTM G86 (Ambient Pressure LOX Mechanical Impact Testing and Pressurized Gaseous Oxygen (GOX) Mechanical Impact Testing), ASTM G72 (AIT Testing), and ASTM D240 (Heat of Combustion (HOC) Testing). Only four solvents were tested through the full battery of tests for evaluation of oxygen compatibility: AK-225G as a baseline comparison, Solstice PF, L-14780, and Vertrel MCA. Baseline solvent AK-225G exhibited the lowest HOC and highest AIT of solvents tested. Nonetheless, Solstice PF, L-14780, and Vertrel MCA HOCs all fell well within the range of properties that are associated with proven oxygen system materials. Tested AITs for these solvents fell only slightly lower than the AIT for the proven AK-225G solvent. Based on these comparisons in which solvents exhibited properties within those ranges seen with proven oxygen system materials, it is believed that Solstice PF, L-14780, and Vertrel MCA would perform well with respect to oxygen compatibility.

Conical scan impact study. Volume 2: Small local user data processing facility. [multispectral band scanner design alternatives for earth resources data

NASA Technical Reports Server (NTRS)

Ebert, D. H.; Chase, P. E.; Dye, J.; Fahline, W. C.; Johnson, R. H.

1973-01-01

The impact of a conical scan versus a linear scan multispectral scanner (MSS) instrument on a small local-user data processing facility was studied. User data requirements were examined to determine the unique system rquirements for a low cost ground system (LCGS) compatible with the Earth Observatory Satellite (EOS) system. Candidate concepts were defined for the LCGS and preliminary designs were developed for selected concepts. The impact of a conical scan MSS versus a linear scan MSS was evaluated for the selected concepts. It was concluded that there are valid user requirements for the LCGS and, as a result of these requirements, the impact of the conical scanner is minimal, although some new hardware development for the LCGS is necessary to handle conical scan data.

An MRI-compatible hand sensory vibrotactile system.

PubMed

Wang, Fa; Lakshminarayanan, Kishor; Slota, Gregory P; Seo, Na Jin; Webster, John G

2015-01-01

Recently, the application of vibrotactile noise to the wrist or back of the hand has been shown to enhance fingertip tactile sensory perception (Enders et al 2013), supporting the potential for an assistive device worn at the wrist, that generates minute vibrations to help the elderly or patients with sensory deficit. However, knowledge regarding the detailed physiological mechanism behind this sensory improvement in the central nervous system, especially in the human brain, is limited, hindering progress in development and use of such assistive devices. To enable investigation of the impact of vibrotactile noise on sensorimotor brain activity in humans, a magnetic resonance imaging (MRI)-compatible vibrotactile system was developed to provide vibrotactile noise during an MRI of the brain. The vibrotactile system utilizes a remote (outside the MR room) signal amplifier which provides a voltage from -40 to +40 V to drive a 12 mm diameter piezoelectric vibrator (inside the MR room). It is portable and is found to be MRI-compatible which enables its use for neurologic investigation with MRI. The system was also found to induce an improvement in fingertip tactile sensation, consistent with the previous study.

United States Air Force F-35A Operational Basing Environmental Impact Statement. Appendix E: Comments

DTIC Science & Technology

2013-09-01

studies such as this one, and other research conducted in most recent decade. Of course, the housing designation ("not compatible with residential...such as final, technical, interim, memorandum, master’s thesis, progress, quarterly, research , special, group study, etc. 3. DATES COVERED...appear in the report, e.g. 001; AFAPL30480105. 6. AUTHOR(S). Enter name(s) of person(s) responsible for writing the report, performing the research

Quenching and disruption of lunar KREEP lava flows by impacts

NASA Technical Reports Server (NTRS)

Ryder, Graham

1988-01-01

The results of a reexamination of petrography of the Apollo 15 KREEP basalts are reported. Several of the basalts contain yellow residual glasses which cross-cut the crystallized phases; some show more extreme disruption. The features of the glasses appear to be compatible only with impact disruption, ejection, and quenching from actively crystallizing flows, indicating a high impact flux immediately after the impact that formed the Imbrium basin. No other example of impacts into active lava flows is known in the solar system.

Experimental Test of Compatibility-Loophole-Free Contextuality with Spatially Separated Entangled Qutrits.

PubMed

Hu, Xiao-Min; Chen, Jiang-Shan; Liu, Bi-Heng; Guo, Yu; Huang, Yun-Feng; Zhou, Zong-Quan; Han, Yong-Jian; Li, Chuan-Feng; Guo, Guang-Can

2016-10-21

The physical impact and the testability of the Kochen-Specker (KS) theorem is debated because of the fact that perfect compatibility in a single quantum system cannot be achieved in practical experiments with finite precision. Here, we follow the proposal of A. Cabello and M. T. Cunha [Phys. Rev. Lett. 106, 190401 (2011)], and present a compatibility-loophole-free experimental violation of an inequality of noncontextual theories by two spatially separated entangled qutrits. A maximally entangled qutrit-qutrit state with a fidelity as high as 0.975±0.001 is prepared and distributed to separated spaces, and these two photons are then measured locally, providing the compatibility requirement. The results show that the inequality for noncontextual theory is violated by 31 standard deviations. Our experiments pave the way to close the debate about the testability of the KS theorem. In addition, the method to generate high-fidelity and high-dimension entangled states will provide significant advantages in high-dimension quantum encoding and quantum communication.

Performance impact of novel polymeric dyes in photoresist applications

NASA Astrophysics Data System (ADS)

Lu, Ping-Hung; Mehtsun, Salem; Sagan, John P.; Shan, Jianhui; Gonzalez, Eleazar; Ding, Shuji; Khanna, Dinesh N.

1999-06-01

Dye compounds are commonly used in photoresists as a low cost and effective way to control swing and/or standing wave effect caused by thin film interference as well as reflective notching by reflective light from highly reflective substrate and topography. Convention dyes are typically a monomeric compound with high absorptivity at the wavelength of exposure light and compatible with the resist system selected. Because of the monomeric nature, conventional dyes are relatively low in molecular weight hence their thermal stability and sublimination propensity has always been an issue of concern. We recently synthesize several highly thermal stable diazotized polymeric dyes. Their thermal properties as well as compatibility with resist system were investigated. The impact of polymeric dyes on the resists lithographic performance, swing reduction and reflective notching control are discussed.

Modeling the Environmental Impact of Air Traffic Operations

NASA Technical Reports Server (NTRS)

Chen, Neil

2011-01-01

There is increased interest to understand and mitigate the impacts of air traffic on the climate, since greenhouse gases, nitrogen oxides, and contrails generated by air traffic can have adverse impacts on the climate. The models described in this presentation are useful for quantifying these impacts and for studying alternative environmentally aware operational concepts. These models have been developed by leveraging and building upon existing simulation and optimization techniques developed for the design of efficient traffic flow management strategies. Specific enhancements to the existing simulation and optimization techniques include new models that simulate aircraft fuel flow, emissions and contrails. To ensure that these new models are beneficial to the larger climate research community, the outputs of these new models are compatible with existing global climate modeling tools like the FAA's Aviation Environmental Design Tool.

EB-promoted recycling of waste tire rubber with polyolefins

NASA Astrophysics Data System (ADS)

Mészáros, László; Bárány, Tamás; Czvikovszky, Tibor

2012-09-01

Despite the fact that more and more methods and solutions are used in the recycling of polymers, there are still some problems, especially in the recycling of cross-linked materials such as rubber. Usually the biggest problem is the lack of compatibility between the cross-linked rubber and the thermoplastic matrix. In this study we applied ground tire rubber (GTR) as recycled material. The GTR was embedded into polyethylene (PE) and polyethylene/ethylene-vinyl acetate copolymer (PE/EVA) matrices. In order to increase the compatibility of the components electron beam (EB) irradiation was applied. The results showed that the irradiation has a beneficial effect on the polymer-GTR interfacial connection. The EB treatment increased not only the tensile strength but also the elongation at break. The irradiation had also positive effect on the impact strength properties.

Proposed systems configurations for a satellite based ISDN

NASA Astrophysics Data System (ADS)

Capece, M.; Pavesi, B.; Tozzi, P.; Galligan, K. P.

This paper summarizes concepts developed during a study for the ESA in which the evolution of ISDN capability and the impact in the satellite land mobile area are examined. Following the progressive steps of the expected ISDN implementation and the potential market penetration, a space based system capable of satisfying particular user services classes has been investigated. The approach used is to establish a comparison between the requirements of potential mobile users and the services already envisaged by ISDN, identifying the service subclasses that might be adopted in a mobile environment through a satellite system. Two system alternatives, with different ISDN compatibility, have been identified. The first option allows a partial compatibility, by providing the central stations of the earth segment with suitable interface units. The second option permits a full integration, operating on the satellite on-board capabilities.

The impact of subliminal effect images in voluntary vs. stimulus-driven actions.

PubMed

Le Bars, Solène; Hsu, Yi-Fang; Waszak, Florian

2016-11-01

According to the ideomotor theory, actions are represented in terms of their sensory effects. In the current study we tested whether subliminal effect images influence action control (1) at early and/or late preparatory stages of (2) voluntary actions or stimulus-driven actions (3) with or without Stimulus-Response (S-R) compatibility. In Experiment 1, participants were presented at random with 50% of S-R compatible stimulus-driven action trials and 50% of voluntary action trials. The actions' effects (i.e. up- or down-pointing arrows) were presented subliminally before each action (i.e. a keypress). In voluntary actions, participants selected more often the action congruent with the prime when it was presented at long intervals before the action. Moreover they responded faster in prime-congruent than in prime-incongruent trials when primes were presented at short intervals before the action. In Experiment 2, participants were only presented with stimulus-driven action trials, with or without S-R compatibility. In stimulus-driven action trials with S-R compatibility (e.g., left-pointing arrow signaling a left keypress), subliminal action-effects did not generate any significant effect on RTs or error rates. On the other hand, in stimulus-driven action trials without S-R compatibility (e.g., letter "H" signaling a left keypress), participants were significantly faster in prime-congruent trials when primes were presented at the shortest time interval before the action. These results suggest that subliminal effect images facilitate voluntary action preparation on an early and a late level. Stimulus-driven action preparation is influenced on a late level only, and only if there is no compatibility between the stimulus and the motor response, that is when the response is not automatically triggered by the common properties existing between the stimulus and the required action. Copyright © 2016 Elsevier B.V. All rights reserved.

Solar energy development impacts on land cover change and protected areas

PubMed Central

Hernandez, Rebecca R.; Hoffacker, Madison K.; Murphy-Mariscal, Michelle L.; Wu, Grace C.; Allen, Michael F.

2015-01-01

Decisions determining the use of land for energy are of exigent concern as land scarcity, the need for ecosystem services, and demands for energy generation have concomitantly increased globally. Utility-scale solar energy (USSE) [i.e., ≥1 megawatt (MW)] development requires large quantities of space and land; however, studies quantifying the effect of USSE on land cover change and protected areas are limited. We assessed siting impacts of >160 USSE installations by technology type [photovoltaic (PV) vs. concentrating solar power (CSP)], area (in square kilometers), and capacity (in MW) within the global solar hot spot of the state of California (United States). Additionally, we used the Carnegie Energy and Environmental Compatibility model, a multiple criteria model, to quantify each installation according to environmental and technical compatibility. Last, we evaluated installations according to their proximity to protected areas, including inventoried roadless areas, endangered and threatened species habitat, and federally protected areas. We found the plurality of USSE (6,995 MW) in California is sited in shrublands and scrublands, comprising 375 km2 of land cover change. Twenty-eight percent of USSE installations are located in croplands and pastures, comprising 155 km2 of change. Less than 15% of USSE installations are sited in “Compatible” areas. The majority of “Incompatible” USSE power plants are sited far from existing transmission infrastructure, and all USSE installations average at most 7 and 5 km from protected areas, for PV and CSP, respectively. Where energy, food, and conservation goals intersect, environmental compatibility can be achieved when resource opportunities, constraints, and trade-offs are integrated into siting decisions. PMID:26483467

Composite body movements modulate numerical cognition: evidence from the motion-numerical compatibility effect

PubMed Central

Cheng, Xiaorong; Ge, Hui; Andoni, Deljfina; Ding, Xianfeng; Fan, Zhao

2015-01-01

A recent hierarchical model of numerical processing, initiated by Fischer and Brugger (2011) and Fischer (2012), suggested that situated factors, such as different body postures and body movements, can influence the magnitude representation and bias numerical processing. Indeed, Loetscher et al. (2008) found that participants’ behavior in a random number generation task was biased by head rotations. More small numbers were reported after leftward than rightward head turns, i.e., a motion-numerical compatibility effect. Here, by carrying out two experiments, we explored whether similar motion-numerical compatibility effects exist for movements of other important body components, e.g., arms, and for composite body movements as well, which are basis for complex human activities in many ecologically meaningful situations. In Experiment 1, a motion-numerical compatibility effect was observed for lateral rotations of two body components, i.e., the head and arms. Relatively large numbers were reported after making rightward compared to leftward movements for both lateral head and arm turns. The motion-numerical compatibility effect was observed again in Experiment 2 when participants were asked to perform composite body movements of congruent movement directions, e.g., simultaneous head left turns and arm left turns. However, it disappeared when the movement directions were incongruent, e.g., simultaneous head left turns and arm right turns. Taken together, our results extended Loetscher et al.’s (2008) finding by demonstrating that their effect is effector-general and exists for arm movements. Moreover, our study reveals for the first time that the impact of spatial information on numerical processing induced by each of the two sensorimotor-based situated factors, e.g., a lateral head turn and a lateral arm turn, can cancel each other out. PMID:26594188

The effect of modified ijuk fibers to crystallinity of polypropylene composite

NASA Astrophysics Data System (ADS)

Prabowo, I.; Nur Pratama, J.; Chalid, M.

2017-07-01

Nowadays, plastics becomes concern associated with its degradation and environmental issues. It has led studies to develop an environmental-friendly material. To minimize the impact of those problems, recently the usage of natural fibers as a filler are introduced because of biodegradability and availability. The promising natural fiber is “ijuk” fiber from Arenga pinnata plant as a filler and polypropylene (PP) polymer as a matrix. Unfortunately, the natural fibers and polymers have the different properties on which polymers are polar while natural fibers are non-polar so that reducing the compatibility and resulting the poor crystallinity. To enhance the compatibility and crystallinity, ijuk fibers were prepared by multistage treatments including alkalinization with 5 and 10% sodium hydroxide (NaOH), oxidation with 3 and 6% sodium hypochlorite (NaClO) and hydrolysis with 20% sulphuric acid (H2SO4) in sequences. The purposes of multistage treatments are to remove the components such as lignin, wax, hemicellulose, to cause an oxidative fragmentation of remaining lignin and to annihilate the amorphous parts respectively. Fourier-Transform Infrared (FTIR) confirms the compatibility meanwhile Differential Scanning Calorimetry (DSC) reveals the crystallinity and Scanning Electron Microscope (SEM) displays surface morphology of polypropylene. The experiments were revealing that the effects of “ijuk” fibers by the multistage treatments of 5 and 10% NaOH resulting the crystallinity of polypropylene around 31.2 and 27.64% respectively compared to the crystallinity before adding the “ijuk” fibers for 16.8%. It indicates that the entire treatments increasing the compatibility and crystallinity of polypropylene. In addition, the use of 5% NaOH offers the better crystallinity than non-treated polypropylene. The experiments conclude that by adding alkalinized “ijuk” fibers of multistage treatments can increase the compatibility and crystallinity of polypropylene.

Integrated orbital servicing study for low-cost payload programs. Volume 2: Technical and cost analysis

NASA Technical Reports Server (NTRS)

Cody, E. R.; Deats, C. L.; Derocher, W. L., Jr.; Kyrias, G. M.; Snodgrass, M. R.; Sosnay, R. D.; Spencer, R. A.; Wudell, A. E.

1975-01-01

Orbital maintenance concepts were examined in an effort to determine a cost effective orbital maintenance system compatible with the space transportation system. An on-orbit servicer maintenance system is recommended as the most cost effective system. A pivoting arm on-orbit servicer was selected and a preliminary design was prepared. It is indicated that orbital maintenance does not have any significant impact on the space transportation system.

A feasibility study of unmanned rendezvous and docking in Mars orbit: Midterm review

NASA Technical Reports Server (NTRS)

1974-01-01

The ascent, rendezvous, docking and sample transfer operations in a potential MSSR mission that uses the Mars orbital rendezvous mode are considered. In order that the design choices made for these operations remain compatible with the rest of the mission, the impact on the Earth launch, Mars landing and orbiting and Earth return phase are also being assessed. The selection and description of a preliminary baseline concept are presented.

76 FR 27925 - Requirements for Maintenance of Inspections, Tests, Analyses, and Acceptance Criteria

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... State Compatibility IX. Voluntary Consensus Standards X. Environmental Impact--Categorical Exclusion XI... endorsed guidance developed by the Nuclear Energy Institute (NEI) in NEI 08-01, ``Industry Guideline for...

Morphological and Mechanical Properties of Polypropylene[PP]/Poly(Ethylene Vinyl Acetate)[EVA] Blends. I. Homopolymer PP/Eva Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramirez-Vargas, E.

2000-10-01

Morphological and mechanical properties of polypropylene [PP]/poly(ethylene vinyl acetate) [EVA] blends have been studied. Infrared results using thin films first indicated a transition toward compatibility between both components at concentrations above 40% EVA. The transition was verified with different experimental techniques and it was associated to morphological changes and mechanical properties. The PP/EVA blends were mechanically evaluated in terms of impact and tensile strength to determine the influence of blending on the performance properties of these materials. Agreement was found between the transition and the enhancement of both elongation at break and impact strength.

Spray Nozzles, Pressures, Additives and Stirring Time on Viability and Pathogenicity of Entomopathogenic Nematodes (Nematoda: Rhabditida) for Greenhouses

PubMed Central

Moreira, Grazielle Furtado; Batista, Elder Simões de Paula; Campos, Henrique Borges Neves; Lemos, Raphael Emilio; Ferreira, Marcelo da Costa

2013-01-01

The objective of this study was to evaluate different strategies for the application of entomopathogenic nematodes (EPN). Three different models of spray nozzles with air induction (AI 11003, TTI 11003 and AD-IA 11004), three spray pressures (207, 413 and 720 kPa), four different additives for tank mixtures (cane molasses, mineral oil, vegetable oil and glycerin) and the influence of tank mixture stirring time were all evaluated for their effect on EPN (Steinernema feltiae) viability and pathogenicity. The different nozzles, at pressures of up to 620 kPa, were found to be compatible with S. feltiae. Vegetable oil, mineral oil and molasses were found to be compatible adjuvants for S. feltiae, and stirring in a motorized backpack sprayer for 30 minutes did not impact the viability or pathogenicity of this nematode. Appropriate techniques for the application of nematodes with backpack sprayers are discussed. PMID:23755280

Risk Mitigation in Preventing Adventitious Agent Contamination of Mammalian Cell Cultures.

PubMed

Shiratori, Masaru; Kiss, Robert

2017-11-14

Industrial-scale mammalian cell culture processes have been contaminated by viruses during the culturing phase. Although the historical frequency of such events has been quite low, the impact of contamination can be significant for the manufacturing company and for the supply of the product to patients. This chapter discusses sources of adventitious agent contamination risk in a cell culture process, provides a semiquantitative assessment of such risks, and describes potential process barriers that can be used to reduce contamination risk. High-temperature, short-time (HTST) heat treatment is recommended as the process barrier of choice, when compatible with the process. A case study assessing the compatibility of HTST heat treatment with a cell culture medium is presented, and lessons learned are shared from our experiences over many years of developing and implementing virus barriers in mammalian cell culture processes. Graphical Abstract.

Spray nozzles, pressures, additives and stirring time on viability and pathogenicity of entomopathogenic nematodes (nematoda: rhabditida) for greenhouses.

PubMed

Moreira, Grazielle Furtado; Batista, Elder Simões de Paula; Campos, Henrique Borges Neves; Lemos, Raphael Emilio; Ferreira, Marcelo da Costa

2013-01-01

The objective of this study was to evaluate different strategies for the application of entomopathogenic nematodes (EPN). Three different models of spray nozzles with air induction (AI 11003, TTI 11003 and AD-IA 11004), three spray pressures (207, 413 and 720 kPa), four different additives for tank mixtures (cane molasses, mineral oil, vegetable oil and glycerin) and the influence of tank mixture stirring time were all evaluated for their effect on EPN (Steinernema feltiae) viability and pathogenicity. The different nozzles, at pressures of up to 620 kPa, were found to be compatible with S. feltiae. Vegetable oil, mineral oil and molasses were found to be compatible adjuvants for S. feltiae, and stirring in a motorized backpack sprayer for 30 minutes did not impact the viability or pathogenicity of this nematode. Appropriate techniques for the application of nematodes with backpack sprayers are discussed.

Experimental realization of Bloch oscillations in a parity-time synthetic silicon photonic lattice

PubMed Central

Xu, Ye-Long; Fegadolli, William S.; Gan, Lin; Lu, Ming-Hui; Liu, Xiao-Ping; Li, Zhi-Yuan; Scherer, Axel; Chen, Yan-Feng

2016-01-01

As an important electron transportation phenomenon, Bloch oscillations have been extensively studied in condensed matter. Due to the similarity in wave properties between electrons and other quantum particles, Bloch oscillations have been observed in atom lattices, photonic lattices, and so on. One of the many distinct advantages for choosing these systems over the regular electronic systems is the versatility in engineering artificial potentials. Here by utilizing dissipative elements in a CMOS-compatible photonic platform to create a periodic complex potential and by exploiting the emerging concept of parity-time synthetic photonics, we experimentally realize spatial Bloch oscillations in a non-Hermitian photonic system on a chip level. Our demonstration may have significant impact in the field of quantum simulation by following the recent trend of moving complicated table-top quantum optics experiments onto the fully integrated CMOS-compatible silicon platform. PMID:27095533

Virtual Impactors: Search and Destroy

NASA Astrophysics Data System (ADS)

Milani, Andrea; Chesley, Steven R.; Boattini, Andrea; Valsecchi, Giovanni B.

2000-05-01

If for an asteroid which has been observed only over a short arc and then lost there are orbits compatible with the observations resulting in collisions, recovery would be desirable to decide if it will actually impact. If recovery is essentially impractical, as is the case for many small asteroids in the 100- to 500-m-diameter range, the next best thing is to make sure that the lost asteroid is not on a collision course. We propose a method for achieving this guarantee, with an observational effort far smaller than the one required for recovery. The procedure involves the computation of an orbit that is compatible with the available observations and, by hypothesis, results in an impact at some later encounter; this we call a virtual impactor (VI). The collision at some future time is a strong constraint; thus the VI has a well determined orbit. We show that it is possible to compute for each given time of observation the skyprint of the VI, that is the set of astrometric positions compatible with an impact (or a near impact). The skyprint needs to be scanned by powerful enough telescopes to perform a negative observation; once this has been done for the skyprints of all VIs, collisions can be excluded even without recovery. We propose to apply this procedure to the case of the lost asteroid 1998 OX 4, for which we have found orbital solutions with impacts in the years 2014, 2038, 2044, and 2046. Suitable observing windows are found when the VI would be close to the Earth in 2001 and in 2003, and the corresponding skyprints are small enough to be covered with very few frames. This procedure might become more and more necessary in the future, as the number of discoveries of small potentially hazardous asteroids increases; we discuss the general principles and the validation procedures that should apply to such a VI removal campaign.

Tracking and Data Relay Satellite System user impact and network compatibility study. [antenna design and telecommunication links

NASA Technical Reports Server (NTRS)

1973-01-01

The report contains data on antenna configurations for the low data rate users of the Tracking and Data Relay Satellite System (TDRSS). It treats the coverage and mutual visibility considerations between the user satellites and the relay satellites and relates these considerations to requirements of antenna beamwidth and fractional user orbital coverage. A final section includes user/TDRS telecommunication link budgets and forward and return link data rate tradeoffs.

U.S. EPA regulation of plant-incorporated protectants: assessment of impacts of gene flow from pest-resistant plants.

PubMed

Wozniak, Chris A; Martinez, Jeannette C

2011-06-08

The U.S. Environmental Protection Agency licenses pesticide-expressing plants under the authority of the Federal Insecticide, Fungicide and Rodenticide Act (FIFRA). Transgenes and their pesticidal products represent pesticides under FIFRA and are referred to as plant-incorporated protectants (PIPs). When sexually compatible wild relatives (SCWR) are sympatric with PIP crops, there is a need to assess the potential for adverse effects to man and the environment resulting from transgene introgression in accord with FIFRA requirements. Genetic compatibility, introgression, weediness of SCWR × PIP hybrids, seed dispersal, and dormancy, among other parameters, as well as effects on other species (herbivores and beneficial insects), all need to be considered as part of the risk assessment for experimental use under Section 5 or registration under Section 3 of FIFRA. EPA is currently developing data requirements and guidance toward addressing potential gene flow impacts from PIPs.

A novel multi-level IC-compatible surface microfabrication technology for MEMS with independently controlled lateral and vertical submicron transduction gaps

NASA Astrophysics Data System (ADS)

Cicek, Paul-Vahe; Elsayed, Mohannad; Nabki, Frederic; El-Gamal, Mourad

2017-11-01

An above-IC compatible multi-level MEMS surface microfabrication technology based on a silicon carbide structural layer is presented. The fabrication process flow provides optimal electrostatic transduction by allowing the creation of independently controlled submicron vertical and lateral gaps without the need for high resolution lithography. Adopting silicon carbide as the structural material, the technology ensures material, chemical and thermal compatibility with modern semiconductor nodes, reporting the lowest peak processing temperature (i.e. 200 °C) of all comparable works. This makes this process ideally suited for integrating capacitive-based MEMS directly above standard CMOS substrates. Process flow design and optimization are presented in the context of bulk-mode disk resonators, devices that are shown to exhibit improved performance with respect to previous generation flexural beam resonators, and that represent relatively complex MEMS structures. The impact of impending improvements to the fabrication technology is discussed.

Impact of Glycolate Anion on Aqueous Corrosion in DWPF and Downstream Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mickalonis, J.

Glycolic acid is being evaluated as an alternate reductant in the preparation of high level waste for the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS). During processing, the glycolic acid may not be completely consumed with small quantities of the glycolate anion being carried forward to other high level waste (HLW) facilities. The SRS liquid waste contractor requested an assessment of the impact of the glycolate anion on the corrosion of the materials of construction (MoC) throughout the waste processing system since this impact had not been previously evaluated. A literature review revealed that corrosion datamore » were not available for the MoCs in glycolic-bearing solutions applicable to SRS systems. Data on the material compatibility with only glycolic acid or its derivative products were identified; however, data were limited for solutions containing glycolic acid or the glycolate anion. For the proprietary coating systems applied to the DWPF concrete, glycolic acid was deemed compatible since the coatings were resistant to more aggressive chemistries than glycolic acid. Additionally, similar coating resins showed acceptable resistance to glycolic acid.« less

Impact of Glycolate Anion on Aqueous Corrosion in DWPF and Downstream Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mickalonis, J.

Glycolic acid is being evaluated as an alternate reductant in the preparation of high level waste for the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS). During processing, the glycolic acid may not be completely consumed with small quantities of the glycolate anion being carried forward to other high level waste (HLW) facilities. The SRS liquid waste contractor requested an assessment of the impact of the glycolate anion on the corrosion of the materials of construction (MoC) throughout the waste processing system since this impact had not been previously evaluated. A literature review revealed that corrosion datamore » were not available for the MoCs in glycolic-bearing solutions applicable to SRS systems. Data on the material compatibility with only glycolic acid or its derivative products were identified; however, data were limited for solutions containing glycolic acid or the glycolate anion. For the proprietary coating systems applied to the DWPF concrete, glycolic acid was deemed compatible since the coatings were resistant to more aggressive chemistries than glycolic acid. Additionally similar coating resins showed acceptable resistance to glycolic acid.« less

Functional compatibility between Purkinje cell axon branches and their target neurons in the cerebellum.

PubMed

Yang, Zhilai; Chen, Na; Ge, Rongjing; Qian, Hao; Wang, Jin-Hui

2017-09-22

A neuron sprouts an axon, and its branches to innervate many target neurons that are divergent in their functions. In order to efficiently regulate the diversified cells, the axon branches should differentiate functionally to be compatible with their target neurons, i.e., a function compatibility between presynaptic and postsynaptic partners. We have examined this hypothesis by using electrophysiological method in the cerebellum, in which the main axon of Purkinje cell projected to deep nucleus cells and the recurrent axons innervated the adjacent Purkinje cells. The fidelity of spike propagation is superior in the recurrent branches than the main axon. The capabilities of encoding spikes and processing GABAergic inputs are advanced in Purkinje cells versus deep nucleus cells. The functional differences among Purkinje's axonal branches and their postsynaptic neurons are preset by the variable dynamics of their voltage-gated sodium channels. In addition, activity strengths between presynaptic and postsynaptic partners are proportionally correlated, i.e., active axonal branches innervate active target neurons, or vice versa. The physiological impact of the functional compatibility is to make the neurons in their circuits to be activated appropriately. In conclusion, each cerebellar Purkinje cell sprouts the differentiated axon branches to be compatible with the diversified target cells in their functions, in order to construct the homeostatic and efficient units for their coordinated activity in neural circuits.

Functional compatibility between Purkinje cell axon branches and their target neurons in the cerebellum

PubMed Central

Qian, Hao; Wang, Jin-Hui

2017-01-01

A neuron sprouts an axon, and its branches to innervate many target neurons that are divergent in their functions. In order to efficiently regulate the diversified cells, the axon branches should differentiate functionally to be compatible with their target neurons, i.e., a function compatibility between presynaptic and postsynaptic partners. We have examined this hypothesis by using electrophysiological method in the cerebellum, in which the main axon of Purkinje cell projected to deep nucleus cells and the recurrent axons innervated the adjacent Purkinje cells. The fidelity of spike propagation is superior in the recurrent branches than the main axon. The capabilities of encoding spikes and processing GABAergic inputs are advanced in Purkinje cells versus deep nucleus cells. The functional differences among Purkinje's axonal branches and their postsynaptic neurons are preset by the variable dynamics of their voltage-gated sodium channels. In addition, activity strengths between presynaptic and postsynaptic partners are proportionally correlated, i.e., active axonal branches innervate active target neurons, or vice versa. The physiological impact of the functional compatibility is to make the neurons in their circuits to be activated appropriately. In conclusion, each cerebellar Purkinje cell sprouts the differentiated axon branches to be compatible with the diversified target cells in their functions, in order to construct the homeostatic and efficient units for their coordinated activity in neural circuits. PMID:29069799

Motion compensation for MRI-compatible patient-mounted needle guide device: estimation of targeting accuracy in MRI-guided kidney cryoablations

NASA Astrophysics Data System (ADS)

Tokuda, Junichi; Chauvin, Laurent; Ninni, Brian; Kato, Takahisa; King, Franklin; Tuncali, Kemal; Hata, Nobuhiko

2018-04-01

Patient-mounted needle guide devices for percutaneous ablation are vulnerable to patient motion. The objective of this study is to develop and evaluate a software system for an MRI-compatible patient-mounted needle guide device that can adaptively compensate for displacement of the device due to patient motion using a novel image-based automatic device-to-image registration technique. We have developed a software system for an MRI-compatible patient-mounted needle guide device for percutaneous ablation. It features fully-automated image-based device-to-image registration to track the device position, and a device controller to adjust the needle trajectory to compensate for the displacement of the device. We performed: (a) a phantom study using a clinical MR scanner to evaluate registration performance; (b) simulations using intraoperative time-series MR data acquired in 20 clinical cases of MRI-guided renal cryoablations to assess its impact on motion compensation; and (c) a pilot clinical study in three patients to test its feasibility during the clinical procedure. FRE, TRE, and success rate of device-to-image registration were mm, mm, and 98.3% for the phantom images. The simulation study showed that the motion compensation reduced the targeting error for needle placement from 8.2 mm to 5.4 mm (p  <  0.0005) in patients under general anesthesia (GA), and from 14.4 mm to 10.0 mm () in patients under monitored anesthesia care (MAC). The pilot study showed that the software registered the device successfully in a clinical setting. Our simulation study demonstrated that the software system could significantly improve targeting accuracy in patients treated under both MAC and GA. Intraprocedural image-based device-to-image registration was feasible.

Supernovae observations in a ``meatball'' universe with a local void

NASA Astrophysics Data System (ADS)

Kainulainen, Kimmo; Marra, Valerio

2009-12-01

We study the impact of cosmic inhomogeneities on the interpretation of observations. We build an inhomogeneous universe model without dark energy that can confront supernova data and yet is reasonably well compatible with the Copernican principle. Our model combines a relatively small local void, that gives apparent acceleration at low redshifts, with a meatball model that gives sizable lensing (dimming) at high redshifts. Together these two elements, which focus on different effects of voids on the data, allow the model to mimic the concordance model.

Microwave Frequency Polarizers

NASA Technical Reports Server (NTRS)

Ha, Vien The; Mirel, Paul; Kogut, Alan J.

2013-01-01

This article describes the fabrication and analysis of microwave frequency polarizing grids. The grids are designed to measure polarization from the cosmic microwave background. It is effective in the range of 500 to 1500 micron wavelength. It is cryogenic compatible and highly robust to high load impacts. Each grid is fabricated using an array of different assembly processes which vary in the types of tension mechanisms to the shape and size of the grids. We provide a comprehensive study on the analysis of the grids' wire heights, diameters, and spacing.

The Feasibility of Avoiding Future Climate Impacts: Results from the AVOID Programmes

NASA Astrophysics Data System (ADS)

Lowe, J. A.; Warren, R.; Arnell, N.; Buckle, S.

2014-12-01

The AVOID programme and its successor, AVOID2, have focused on answering three core questions: how do we characterise potentially dangerous climate change and impacts, which emissions pathways can avoid at least some of these impacts, and how feasible are the future reductions needed to significantly deviate from a business-as-usual future emissions pathway. The first AVOID project succeeded in providing the UK Government with evidence to inform its position on climate change. A key part of the work involved developing a range of global emissions pathways and estimating and understanding the corresponding global impacts. This made use of a combination of complex general circulation models, simple climate models, pattern-scaling and state-of-the art impacts models. The results characterise the range of avoidable impacts across the globe in several key sectors including river and coastal flooding, cooling and heating energy demand, crop productivity and aspects of biodiversity. The avoided impacts between a scenario compatible with a 4ºC global warming and one with a 2ºC global warming were found to be highly sector dependent and avoided fractions typically ranged between 20% and 70%. A further key aspect was characterising the magnitude of the uncertainty involved, which is found to be very large in some impact sectors although the avoided fraction appears a more robust metric. The AVOID2 programme began in 2014 and will provide results in the run up to the Paris CoP in 2015. This includes new post-IPCC 5th assessment evidence to inform the long-term climate goal, a more comprehensive assessment of the uncertainty ranges of feasible emission pathways compatible with the long-term goal and enhanced estimates of global impacts using the latest generation of impact models and scenarios.

Soil-Bacterium Compatibility Model as a Decision-Making Tool for Soil Bioremediation.

PubMed

Horemans, Benjamin; Breugelmans, Philip; Saeys, Wouter; Springael, Dirk

2017-02-07

Bioremediation of organic pollutant contaminated soil involving bioaugmentation with dedicated bacteria specialized in degrading the pollutant is suggested as a green and economically sound alternative to physico-chemical treatment. However, intrinsic soil characteristics impact the success of bioaugmentation. The feasibility of using partial least-squares regression (PLSR) to predict the success of bioaugmentation in contaminated soil based on the intrinsic physico-chemical soil characteristics and, hence, to improve the success of bioaugmentation, was examined. As a proof of principle, PLSR was used to build soil-bacterium compatibility models to predict the bioaugmentation success of the phenanthrene-degrading Novosphingobium sp. LH128. The survival and biodegradation activity of strain LH128 were measured in 20 soils and correlated with the soil characteristics. PLSR was able to predict the strain's survival using 12 variables or less while the PAH-degrading activity of strain LH128 in soils that show survival was predicted using 9 variables. A three-step approach using the developed soil-bacterium compatibility models is proposed as a decision making tool and first estimation to select compatible soils and organisms and increase the chance of success of bioaugmentation.

Slippage theory and the flanker paradigm: an early-selection account of selective attention failures.

PubMed

Gaspelin, Nicholas; Ruthruff, Eric; Jung, Kyunghun

2014-06-01

In the flanker paradigm, participants identify a target letter while attempting to ignore an irrelevant flanker. When the identity of this flanker mismatches the target, target identification is slowed (called the flanker compatibility effect). Interestingly, reducing the array set size greatly increases flanker compatibility effects. This finding inspired 2 prominent explanations: perceptual load (mandatory capacity spillover) and dilution (visual interference). However, an alternative explanation, based on early selection theory and attention capture research, can also explain the data pattern. According to this "slippage" account, observers sometimes accidentally allocate spatial attention to the flanker (see Lachter, Forster, & Ruthruff, 2004), especially when the flanker has the property used to find the target (cf. contingent capture). In Experiments 1 through 4, deterring slippage to the flanker nearly eliminated flanker compatibility effects, even at the low set size. In Experiment 5, promoting slippage to the flanker dramatically enhanced compatibility effects, even at the high set size. Thus, slippage strongly modulates flanker effects and can, by itself, readily explain the impact of set size. The perceptual load and dilution accounts are, at best, incomplete, and, at worst, not needed. PsycINFO Database Record (c) 2014 APA, all rights reserved.

E-beam sterilizable thermoplastics elastomers for healthcare devices: Mechanical, morphology, and in vivo studies.

PubMed

Balaji, Ananad Bellam; Ratnam, Chantara Thevy; Khalid, Mohammad; Walvekar, Rashmi

2018-03-01

The effect of electron beam radiation on ethylene-propylene diene terpolymer/polypropylene blends is studied as an attempt to develop radiation sterilizable polypropylene/ethylene-propylene diene terpolymer blends suitable for medical devices. The polypropylene/ethylene-propylene diene terpolymer blends with mixing ratios of 80/20, 50/50, 20/80 were prepared in an internal mixer at 165°C and a rotor speed of 50 rpm/min followed by compression molding. The blends and the individual components were radiated using 3.0 MeV electron beam accelerator at doses ranging from 0 to 100 kGy in air and room temperature. All the samples were tested for tensile strength, elongation at break, hardness, impact strength, and morphological properties. After exposing to 25 and 100 kGy radiation doses, 50% PP blend was selected for in vivo studies. Results revealed that radiation-induced crosslinking is dominating in EPDM dominant blends, while radiation-induced degradation is prevailing in PP dominant blends. The 20% PP blend was found to be most compatible for 20-60 kGy radiation sterilization. The retention in impact strength with enhanced tensile strength of 20% PP blend at 20-60 kGy believed to be associated with increased compatibility between PP and EPDM along with the radiation-induced crosslinking. The scanning electron micrographs of the fracture surfaces of the PP/EPDM blends showed evidences consistent with the above contentation. The in vivo studies provide an instinct that the radiated blends are safe to be used for healthcare devices.

Bumper and grille airbags concept for enhanced vehicle compatibility in side impact: phase II.

PubMed

Barbat, Saeed; Li, Xiaowei; Prasad, Priya

2013-01-01

Fundamental physics and numerous field studies have shown a higher injury and fatality risk for occupants in smaller and lighter vehicles when struck by heavier, taller and higher vehicles. The consensus is that the significant parameters influencing compatibility in front-to-side crashes are geometric interaction, vehicle stiffness, and vehicle mass. The objective of this research is to develop a concept of deployable bumper and grille airbags for improved vehicle compatibility in side impact. The external airbags, deployed upon signals from sensors, may help mitigate the effect of weight, geometry and stiffness differences and reduce side intrusions. However, a highly reliable pre-crash sensing system is required to enable the reliable deployment, which is currently not technologically feasible. Analytical and numerical methods and hardware testing were used to help develop the deployable external airbags concept. Various Finite Element (FE) models at different stages were developed and an extensive number of iterations were conducted to help optimize airbag and inflator parameters to achieve desired targets. The concept development was executed and validated in two phases. This paper covers Phase II ONLY, which includes: (1) Re-design of the airbag geometry, pressure, and deployment strategies; (2) Further validation using a Via sled test of a 48 kph perpendicular side impact of an SUV-type impactor against a stationary car with US-SID-H3 crash dummy in the struck side; (3) Design of the reaction surface necessary for the bumper airbag functionality. The concept was demonstrated through live deployment of external airbags with a reaction surface in a full-scale perpendicular side impact of an SUV against a stationary passenger car at 48 kph. This research investigated only the concept of the inflatable devices since pre-crash sensing development was beyond the scope of this research. The concept design parameters of the bumper and grille airbags are presented in this paper. Full vehicle-to-vehicle crash test results, Via sled test, and simulation results are also presented. Head peak acceleration, Head Injury Criteria (HIC), Thoracic Trauma Index (TTI), and Pelvic acceleration for the SID-H3 dummy and structural intrusion profiles were used as performance metrics for the bumper and grille airbags. Results obtained from the Via sled tests and the full vehicle-to-vehicle tests with bumper and grille airbags were compared to those of baseline test results with no external airbags.

Conical scan impact study. Volume 1: General central data processing facility. [multispectral band scanner design alternatives for earth resources data

NASA Technical Reports Server (NTRS)

Ebert, D. H.; Eppes, T. A.; Thomas, D. J.

1973-01-01

The impact of a conical scan versus a linear scan multispectral scanner (MSS) instrument was studied in terms of: (1) design modifications required in framing and continuous image recording devices; and (2) changes in configurations of an all-digital precision image processor. A baseline system was defined to provide the framework for comparison, and included pertinent spacecraft parameters, a conical MSS, a linear MSS, an image recording system, and an all-digital precision processor. Lateral offset pointing of the sensors over a range of plus or minus 20 deg was considered. The study addressed the conical scan impact on geometric, radiometric, and aperture correction of MSS data in terms of hardware and software considerations, system complexity, quality of corrections, throughput, and cost of implementation. It was concluded that: (1) if the MSS data are to be only film recorded, then there is only a nomial concial scan impact on the ground data processing system; and (2) if digital data are to be provided to users on computer compatible tapes in rectilinear format, then there is a significant conical scan impact on the ground data processing system.

40 CFR 227.12 - Insoluble wastes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING CRITERIA FOR THE EVALUATION OF PERMIT APPLICATIONS FOR OCEAN DUMPING OF MATERIALS Environmental Impact § 227.12 Insoluble wastes. (a) Solid wastes consisting of inert natural minerals or materials compatible with the ocean...

Compatibility Studies of Hydrogen Peroxide and a New Hypergolic Fuel Blend

NASA Technical Reports Server (NTRS)

Baldridge, Jennifer; Villegas, Yvonne

2002-01-01

Several preliminary materials compatibility studies have been conducted to determine the practicality of a new hypergolic fuel system. Hypergolic fuel ignites spontaneously as the oxidizer decomposes and releases energy in the presence of the fuel. The bipropellant system tested consists of high-test hydrogen peroxide (HTP) and a liquid fuel blend consisting of a hydrocarbon fuel, an ignition enhancer and a transition metal catalyst. In order for further testing of the new fuel blend to take place, some basic materials compatibility and HTP decomposition studies must be accomplished. The thermal decomposition rate of HTP was tested using gas evolution and isothermal microcalorimetry (IMC). Materials were analyzed for compatibility with hydrogen peroxide including a study of the affect welding has on stainless steel elemental composition and its relation to HTP decomposition. Compatibility studies of valve materials in the fuel blend were performed to determine the corrosion resistance of the materials.

Adolescents of the USA National Longitudinal Lesbian Family Study: can family characteristics counteract the negative effects of stigmatization?

PubMed

Bos, Henny; Gartrell, Nanette

2010-12-01

This investigation examines the impact of homophobic stigmatization on the well-being of 17-year-old adolescents who were conceived through donor insemination and whose mothers enrolled before they were born in the largest, longest-running, prospective study of lesbian families, with a 93% retention rate to date. The data for the current report were collected through questionnaires completed by the adolescents and their mothers. The adolescents (39 girls and 39 boys) were queried about family connection and compatibility. They were also asked to indicate if they had experienced discrimination based on their mothers' sexual orientation. Adolescent well-being was assessed through the parental report of the Child Behavior Checklist/6-18. Forty-one percent of the adolescents had experienced stigmatization based on homophobia. Hierarchical, multiple-regression analyses revealed that stigmatization was associated with more problem behavior in these adolescents, but that family compatibility neutralized this negative influence. The results indicate that adolescents who have close, positive relationships with their lesbian mothers demonstrate resilience in response to stigmatization. 2010 © FPI, Inc.

Time dependent response of low velocity impact induced composite conical shells under multiple delamination

NASA Astrophysics Data System (ADS)

Dey, Sudip; Karmakar, Amit

2014-02-01

This paper presents the time dependent response of multiple delaminated angle-ply composite pretwisted conical shells subjected to low velocity normal impact. The finite element formulation is based on Mindlin's theory incorporating rotary inertia and effects of transverse shear deformation. An eight-noded isoparametric plate bending element is employed to satisfy the compatibility of deformation and equilibrium of resultant forces and moments at the delamination crack front. A multipoint constraint algorithm is incorporated which leads to asymmetric stiffness matrices. The modified Hertzian contact law which accounts for permanent indentation is utilized to compute the contact force, and the time dependent equations are solved by Newmark's time integration algorithm. Parametric studies are conducted with respect to triggering parameters like laminate configuration, location of delamination, angle of twist, velocity of impactor, and impactor's displacement for centrally impacted shells.

Identifying sustainable foods: the relationship between environmental impact, nutritional quality, and prices of foods representative of the French diet.

PubMed

Masset, Gabriel; Soler, Louis-Georges; Vieux, Florent; Darmon, Nicole

2014-06-01

Sustainable diets, as defined by the Food and Agriculture Organization, need to combine environment, nutrition, and affordability dimensions. However, it is unknown whether these dimensions are compatible, and no guidance is available in the official recommendations. To identify foods with compatible sustainability dimensions. For 363 of the most commonly consumed foods in the Second French Individual and National Study on Food Consumption, environmental impact indicators (ie, greenhouse gas [GHG] emissions, acidification, and eutrophication), and prices were collected. The nutritional quality of the foods was assessed by calculating the score for the nutritional adequacy of individual foods (SAIN) to score for disqualifying nutrients (LIM) ratio. A sustainability score based on the median GHG emissions, price, and SAIN:LIM was calculated for each food; the foods with the best values for all three variables received the highest score. The environmental indicators were strongly and positively correlated. Meat, fish, and eggs and dairy products had the strongest influence on the environment; starchy foods, legumes, and fruits and vegetables had the least influence. GHG emissions were inversely correlated with SAIN:LIM (r=-0.37) and positively correlated with price per kilogram (r=0.59); the correlation with price per kilocalorie was null. This showed that foods with a heavy environmental impact tend to have lower nutritional quality and a higher price per kilogram but not a lower price per kilocalorie. Using price per kilogram, 94 foods had a maximum sustainability score, including most plant-based foods and excluding all foods with animal ingredients except milk, yogurt, and soups. Using price per kilocalorie restricted the list to 42 foods, including 52% of all starchy foods and legumes but only 11% of fruits and vegetables (mainly 100% fruit juices). Overall, the sustainability dimensions seemed to be compatible when considering price per kilogram of food. However, this conclusion is too simplistic when considering price per kilocalorie, which highlights the need to integrate the data at the diet level. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hektor, Andi; Marzola, Luca; Institute of Physics, University of Tartu,Ravila 14c, 50411 Tartu

Motivated by the recent indications for a 750 GeV resonance in the di-photon final state at the LHC, in this work we analyse the compatibility of the excess with the broad photon excess detected at the Galactic Centre. Intriguingly, by analysing the parameter space of an effective models where a 750 GeV pseudoscalar particles mediates the interaction between the Standard Model and a scalar dark sector, we prove the compatibility of the two signals. We show, however, that the LHC mono-jet searches and the Fermi LAT measurements strongly limit the viable parameter space. We comment on the possible impact ofmore » cosmic antiproton flux measurement by the AMS-02 experiment.« less

Compatibility of Isaria fumosorosea (Hypocreales: Cordycipitaceae) Blastospores with Agricultural Chemicals Used for Management of the Asian Citrus Psyllid, Diaphorina citri (Hemiptera: Liviidae)

PubMed Central

Avery, Pasco B.; Pick, David A.; Aristizábal, Luis F.; Kerrigan, James; Powell, Charles A.; Rogers, Michael E.; Arthurs, Steven P.

2013-01-01

Biorational insecticides are being increasingly emphasized for inclusion in integrated pest management programs for invasive insects. The entomopathogenic fungus, Isaria fumosorosea, can be used to help manage the Asian citrus psyllid with minimal impact on beneficial arthropods, but its effectiveness may be compromised by agrochemicals used to control concurrent arthropod pests and diseases. We evaluated the compatibility of I. fumosorosea blastospores with a range of spray oils and copper-based fungicides registered for use in citrus groves. Results of laboratory and greenhouse tests showed a range of responses of the fungus to the different materials, including compatibility and incompatibility. Overall, I. fumosorosea growth in vitro was reduced least by petroleum-based materials and most by botanical oils and borax, and some of the copper-based fungicides, suggesting that tank mixing of I. fumosorosea with these latter products should be avoided. However, equivalent negative effects of test materials on fungal pathogenicity were not always observed in tests with adult psyllids. We hypothesize that some oils enhanced adherence of blastospores to the insect cuticle, overcoming negative impacts on germination. Our data show that care should be taken in selecting appropriate agrochemicals for tank-mixing with commercial formulations of entomopathogenic fungi for management of citrus pests. The prospects of using I. fumosorosea for managing the invasive Asian citrus psyllid and other citrus pests are discussed. PMID:26462531

Characterization of a prototype MR-compatible Delta4 QA system in a 1.5 tesla MR-linac

NASA Astrophysics Data System (ADS)

de Vries, J. H. W.; Seravalli, E.; Houweling, A. C.; Woodings, S. J.; van Rooij, R.; Wolthaus, J. W. H.; Lagendijk, J. J. W.; Raaymakers, B. W.

2018-01-01

To perform patient plan quality assurance (QA) on a newly installed MR-linac (MRL) it is necessary to have an MR-compatible QA device. An MR compatible device (MR-Delta4) has been developed together with Scandidos AB (Uppsala, Sweden). The basic characteristics of the detector response, such as short-term reproducibility, dose linearity, field size dependency, dose rate dependency, dose-per-pulse dependency and angular dependency, were investigated for the clinical Delta4-PT as well as for the MR compatible version. All tests were performed with both devices on a conventional linac and the MR compatible device was tested on the MRL as well. No statistically significant differences were found in the short-term reproducibility (<0.1%), dose linearity (⩽0.5%), field size dependency (<2.0% for field sizes larger than 5  ×  5 cm2), dose rate dependency (<1.0%) or angular dependency for any phantom/linac combination. The dose-per-pulse dependency (<0.8%) was found to be significantly different between the two devices. This difference can be explained by the fact that the diodes in the clinical Delta4-PT were irradiated with a much larger dose than the MR-Delta4-PT ones. The absolute difference between the devices (<0.5%) was found to be small, so no clinical impact is expected. For both devices, the results were consistent with the characteristics of the Delta4-PT device reported in the literature (Bedford et al 2009 Phys. Med. Biol. 54 N167-76 Sadagopan et al 2009 J. Appl. Clin. Med. Phys. 10 2928). We found that the characteristics of the MR compatible Delta4 phantom were found to be comparable to the clinically used one. Also, the found characteristics do not differ from the previously reported characteristics of the commercially available non-MR compatible Delta4-PT phantom. Therefore, the MR compatible Delta4 prototype was found to be safe and effective for use in the 1.5 tesla magnetic field of the Elekta MR-linac

Mass spectrometry. [review of techniques

NASA Technical Reports Server (NTRS)

Burlingame, A. L.; Kimble, B. J.; Derrick, P. J.

1976-01-01

Advances in mass spectrometry (MS) and its applications over the past decade are reviewed in depth, with annotated literature references. New instrumentation and techniques surveyed include: modulated-beam MS, chromatographic MS on-line computer techniques, digital computer-compatible quadrupole MS, selected ion monitoring (mass fragmentography), and computer-aided management of MS data and interpretation. Areas of application surveyed include: organic MS and electron impact MS, field ionization kinetics, appearance potentials, translational energy release, studies of metastable species, photoionization, calculations of molecular orbitals, chemical kinetics, field desorption MS, high pressure MS, ion cyclotron resonance, biochemistry, medical/clinical chemistry, pharmacology, and environmental chemistry and pollution studies.

On the temporal dynamics of spatial stimulus-response transfer between spatial incompatibility and Simon tasks

PubMed Central

Ivanoff, Jason; Blagdon, Ryan; Feener, Stefanie; McNeil, Melanie; Muir, Paul H.

2014-01-01

The Simon effect refers to the performance (response time and accuracy) advantage for responses that spatially correspond to the task-irrelevant location of a stimulus. It has been attributed to a natural tendency to respond toward the source of stimulation. When location is task-relevant, however, and responses are intentionally directed away (incompatible) or toward (compatible) the source of the stimulation, there is also an advantage for spatially compatible responses over spatially incompatible responses. Interestingly, a number of studies have demonstrated a reversed, or reduced, Simon effect following practice with a spatial incompatibility task. One interpretation of this finding is that practicing a spatial incompatibility task disables the natural tendency to respond toward stimuli. Here, the temporal dynamics of this stimulus-response (S-R) transfer were explored with speed-accuracy trade-offs (SATs). All experiments used the mixed-task paradigm in which Simon and spatial compatibility/incompatibility tasks were interleaved across blocks of trials. In general, bidirectional S-R transfer was observed: while the spatial incompatibility task had an influence on the Simon effect, the task-relevant S-R mapping of the Simon task also had a small impact on congruency effects within the spatial compatibility and incompatibility tasks. These effects were generally greater when the task contexts were similar. Moreover, the SAT analysis of performance in the Simon task demonstrated that the tendency to respond to the location of the stimulus was not eliminated because of the spatial incompatibility task. Rather, S-R transfer from the spatial incompatibility task appeared to partially mask the natural tendency to respond to the source of stimulation with a conflicting inclination to respond away from it. These findings support the use of SAT methodology to quantitatively describe rapid response tendencies. PMID:25191217

Ruling out Virtual Impactors with Negative Observations

NASA Astrophysics Data System (ADS)

Milani, A.; Chesley, S. R.; Boattini, A.; Valsecchi, G. B.

1999-09-01

If, for an asteroid which has been observed only over a short arc then lost, there are orbits compatible with the observations resulting in collisions, recovery would be desirable to decide if it will actually impact. If recovery is essentially impractical, as is the case for many small asteroids in the 100 m to 500 m diameter range, the next best thing is to make sure that the lost asteroid is not on a collision course. We propose a method to achieve this guarantee, with an observational effort far smaller than the one required for recovery. The procedure involves the computation of an orbit which is compatible with the available observations and, by hypothesis, results in an impact at some later encounter; this we call a Virtual Impactor (VI). The collision at some future time is a strong constraint, thus the VI has a well determined orbit. We show that it is possible to compute for each given time of observation the skyprint of the VI, that is the set of astrometric positions compatible with an impact (or a near impact). The skyprint needs to be scanned by powerful enough telescopes to perform a negative observation; once this has been done for the skyprints of all VIs, collisions can be excluded even without recovery. We propose to apply this procedure to the case of the lost asteroid 1998 OX_4, for which we have found orbital solutions with impacts in the years 2014, 2038, 2044 and 2046. Suitable observing windows are found when the VI would be close to the Earth in 2001 and in 2003, and the corresponding skyprints are small enough to be covered with very few frames. This procedure might become more and more necessary in the future, as the number of discoveries of small potentially hazardous asteroids increases; we discuss the general principles and the validation procedures that should apply to such a VI removal campaign. This research has been funded by the Italian Space Agency (ASI), by a NATO fellowship, by Consiglio Nazionale delle Ricerche (CNR), by the University of Pisa, and by the Spaceguard Foundation.

Blends of polyester ionomers with polar polymers: Interactions, reactions, and compatibilization

NASA Astrophysics Data System (ADS)

Boykin, Timothy Lamar

The compatibility of amorphous and semicrystalline polyester ionomers with various polar polymers (i.e., polyesters and polyamides) has been investigated for their potential use as minor component compatibilizers. The degree of compatibility (i.e., ranging from incompatible to miscible) between the polyester ionomers and the polar polymers was determined by evaluating the effect of blend composition on the melting behavior and phase behavior of binary blends. In addition, the origin of compatibility and/or incompatibility for each of the binary blends (i.e., polyamide/ionomer and polyester/ionomer) was determined by evaluating blends prepared by both solution and melt mixed methods. Subsequent to investigation of the binary blends, the effect of polyester ionomer addition on the compatibility of polyamide/polyester blends was investigated by evaluating the mechanical properties and phase morphology of ionomer compatibilized polyamide/polyester blends. Polyester ionomers (amorphous and semicrystalline) were shown to exhibit a high degree of compatibility (even miscibility) with polyamides, such as nylon 6,6 (N66). Compatibility was attributed to specific interactions between the metal counterion of the polyester ionomer and the amide groups of N66. The degree of compatibility (or miscibility) was shown to be dependent on the counterion type of the ionomer, with the highest degree exhibited by blends containing the divalent form of the polyester ionomers. Although polyester ionomers were shown to exhibit incompatibility with both poly(ethylene terephthalate) (PET) and poly(butylene terephthalate) (PBT), increasing the time of melt processing significantly enhanced the compatibility of the polyester ionomers with both PET and PBT. The observed enhancement in compatibility was attributed to ester-ester interchange between the polyester blend components, which was confirmed by NMR spectroscopy. The addition of polyester ionomers as a minor component compatibilizer (i.e., 2 to 5 wt%) resulted in significant enhancement in the impact strength and a dramatic improvement in the tensile properties compared to uncompatibilized blends of nylon 6,6 (N66) with poly(butylene terephthalate) (PBT). This behavior was attributed to an increase in the interfacial adhesion between the phase-separated domains due to strong interactions between the polyester ionomer and N66. The placement of the ionomer compatibilizer at the N66/PBT interface was facilitated by pre-extrusion of the polyester ionomer with PBT, prior to extrusion with N66.

The work compatibility improvement framework: an assessment of the worker-work environment interaction in the manufacturing sector.

PubMed

Genaidy, Ash M; Rinder, Magda M; A-Rehim, Amal D

2008-08-01

The manufacturing sector in the US is challenged by high health care costs and shortage of qualified workers, which are largely attributed to the degree of fit between the worker and work environment. In this regard, a healthy worker-work environment interface is a necessary and sufficient condition for the containment of health care costs and the retaining/attraction of highly qualified knowledge workers and should be based on the principles of optimum physical, cognitive and emotional health for the workers. In prior research, the Work Compatibility Improvement Framework (WCIF) was introduced as a vehicle to address these issues and was defined as the identification, improvement and maintenance of the well-being characteristics of the workforce and its interaction with the work environment through the application of engineering, medicine, management and human sciences methodologies, technologies and best practices. This paper advances WCIF by examining its applications in manufacturing with regard to the evaluation of working conditions impacting musculoskeletal/stress outcome measures. A study was conducted in a machining department of a bag packaging manufacturer in the Midwest of the United States. The work tasks were planned and executed with regard to the following aims: (1) to compute work compatibility as a function of work demands and energisers; (2) to establish whether the prevalence of musculoskeletal/stress disorders increases with a decrease in the quality of worker-work environment interface in terms of work compatibility level and other work factors such as shift and job category. A major finding is that a 'poor' work environment (a function of all work domains) results in musculoskeletal/stress disorders that are 105% and 67% higher than those for a 'good' work environment. The evening shift exhibited the poorest compatibility followed by the night shift relative to the day shift. Application of the work compatibility approach demonstrated the detection of non-added value work. It is essential to evaluate the various domains of worker-work environment interface to uncover the root causes that tend to sub-optimise the physical/cognitive/emotional health of the workforce. The WCIF was used to uncover the non-value added effort in the work process. These findings will have major implications for developing and implementing customised design interventions with the aim to maximise the benefit and reduce the cost of employees in a manufacturing enterprise. The study findings suggest that the WCIF should be pursued as a potential strategic tool for optimising human performance in an enterprise to create healthy workplaces.

Evaluating arguments during instigations of defence motivation and accuracy motivation.

PubMed

Liu, Cheng-Hong

2017-05-01

When people evaluate the strength of an argument, their motivations are likely to influence the evaluation. However, few studies have specifically investigated the influences of motivational factors on argument evaluation. This study examined the effects of defence and accuracy motivations on argument evaluation. According to the compatibility between the advocated positions of arguments and participants' prior beliefs and the objective strength of arguments, participants evaluated four types of arguments: compatible-strong, compatible-weak, incompatible-strong, and incompatible-weak arguments. Experiment 1 revealed that participants possessing a high defence motivation rated compatible-weak arguments as stronger and incompatible-strong ones as weaker than participants possessing a low defence motivation. However, the strength ratings between the high and low defence groups regarding both compatible-strong and incompatible-weak arguments were similar. Experiment 2 revealed that when participants possessed a high accuracy motivation, they rated compatible-weak arguments as weaker and incompatible-strong ones as stronger than when they possessed a low accuracy motivation. However, participants' ratings on both compatible-strong and incompatible-weak arguments were similar when comparing high and low accuracy conditions. The results suggest that defence and accuracy motivations are two major motives influencing argument evaluation. However, they primarily influence the evaluation results for compatible-weak and incompatible-strong arguments, but not for compatible-strong and incompatible-weak arguments. © 2016 The British Psychological Society.

The 1990 high-speed civil transport studies

NASA Technical Reports Server (NTRS)

1992-01-01

This summary report contains the results of the Douglas Aircraft Company system studies related to High-Speed Civil Transports (HSCT's). The tasks were performed under an 18-month extension of NASA Langley Research Center Contract NAS1-18378. The system studies were conducted to assess the emission impact of HSCT's at design Mach numbers ranging from 1.6 to 3.2. The tasks specifically addressed an HSCT market and economic assessment, development of supersonic route networks, and an atmospheric emissions scenario. The general results indicated: (1) market projections predict sufficient passenger traffic for the 2000 to 2025 time period to support a fleet of economically viable and environmentally compatible HSCT's; (2) the HSCT route structure to minimize supersonic overland traffic can be increased by innovative routing to avoid land masses; and (3) the atmospheric emission impact on ozone would be significantly lower for Mach 1.6 operations than for Mach 3.2 operations.

Dispensing Equipment Testing with Mid-Level Ethanol/Gasoline Test Fluid: Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyce, K.; Chapin, J. T.

The National Renewable Energy Laboratory's (NREL) Nonpetroleum-Based Fuel Task addresses the hurdles to commercialization of biomass-derived fuels and fuel blends. One such hurdle is the unknown compatibility of new fuels with current infrastructure, such as the equipment used at service stations to dispense fuel into automobiles. The U.S. Department of Energy's (DOE) Vehicle Technology Program and the Biomass Program have engaged in a joint project to evaluate the potential for blending ethanol into gasoline at levels higher than nominal 10 volume percent. This project was established to help DOE and NREL better understand any potentially adverse impacts caused by amore » lack of knowledge about the compatibility of the dispensing equipment with ethanol blends higher than what the equipment was designed to dispense. This report provides data about the impact of introducing a gasoline with a higher volumetric ethanol content into service station dispensing equipment from a safety and a performance perspective.« less

Impact of processing parameters on the haemocompatibility of Bombyx mori silk films.

PubMed

Seib, F Philipp; Maitz, Manfred F; Hu, Xiao; Werner, Carsten; Kaplan, David L

2012-02-01

Silk has traditionally been used for surgical sutures due to its lasting strength and durability; however, the use of purified silk proteins as a scaffold material for vascular tissue engineering goes beyond traditional use and requires application-orientated biocompatibility testing. For this study, a library of Bombyx mori silk films was generated and exposed to various solvents and treatment conditions to reflect current silk processing techniques. The films, along with clinically relevant reference materials, were exposed to human whole blood to determine silk blood compatibility. All substrates showed an initial inflammatory response comparable to polylactide-co-glycolide (PLGA), and a low to moderate haemostasis response similar to polytetrafluoroethylene (PTFE) substrates. In particular, samples that were water annealed at 25 °C for 6 h demonstrated the best blood compatibility based on haemostasis parameters (e.g. platelet decay, thrombin-antithrombin complex, platelet factor 4, granulocytes-platelet conjugates) and inflammatory parameters (e.g. C3b, C5a, CD11b, surface-associated leukocytes). Multiple factors such as treatment temperature and solvent influenced the biological response, though no single physical parameter such as β-sheet content, isoelectric point or contact angle accurately predicted blood compatibility. These findings, when combined with prior in vivo data on silk, support a viable future for silk-based vascular grafts. Copyright © 2011 Elsevier Ltd. All rights reserved.

Development of a MASH TL-2 guardrail-to-bridge rail transition compatible with 31-inch guardrail.

DOT National Transportation Integrated Search

2011-12-01

The TxDOT Design Division is in the process of developing new guardrail standards that comply with the AASHTO Manual for Assessing Safety Hardware (MASH). The new guardrail system will provide increased capacity and improved impact performance relati...

Desktop Publishing: Its Impact on Community College Journalism.

ERIC Educational Resources Information Center

Grzywacz-Gray, John; And Others

1987-01-01

Illustrates the kinds of copy that can be created on Apple Macintosh computers and laser printers. Shows font and type specification options. Discusses desktop publishing costs, potential problems, and computer compatibility. Considers the use of computers in college journalism in production, graphics, accounting, advertising, and promotion. (AYC)

Use of thin plastic films at cryogenic temperatures

NASA Technical Reports Server (NTRS)

Lark, R. F.; Hoggatt, J. T.; Wiedekamp, K. E.; Shdo, J. G.

1972-01-01

Commercially available plastic film materials that remain flexible at cryogenic temperatures and resist failures caused by folds and wrinkles created during expulsion were investigated for use in expulsion bladders for liquefied gases. Compatible adhesive systems, fabrication techniques, and results of impact and dynamic loading tests are summarized.

75 FR 42000 - Requirements for Fingerprint-Based Criminal History Records Checks for Individuals Seeking...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-20

... Compatibility VIII. Plain Language IX. Voluntary Consensus Standards X. Finding of No Significant Environmental Impact: Availability XI. Paperwork Reduction Act Statement XII. Regulatory Analysis: Availability XIII... received seven comment letters from interested parties: Four from RTR licensees, one from the Nuclear...

Geobase Information System Impacts on Space Image Formats

NASA Technical Reports Server (NTRS)

Simonett, D. S. (Editor); Smith, T. R. (Editor); Tobler, W. (Editor); Marks, D. G. (Editor); Frew, J. E. (Editor); Dozier, J. C. (Editor)

1978-01-01

As Geobase Information Systems increase in number, size and complexity, the format compatability of satellite remote sensing data becomes increasingly more important. Because of the vast and continually increasing quantity of data available from remote sensing systems the utility of these data is increasingly dependent on the degree to which their formats facilitate, or hinder, their incorporation into Geobase Information Systems. To merge satellite data into a geobase system requires that they both have a compatible geographic referencing system. Greater acceptance of satellite data by the user community will be facilitated if the data are in a form which most readily corresponds to existing geobase data structures. The conference addressed a number of specific topics and made recommendations.

Caesium sputter ion source compatible with commercial SIMS instruments

NASA Astrophysics Data System (ADS)

Belykh, S. F.; Palitsin, V. V.; Veryovkin, I. V.; Kovarsky, A. P.; Chang, R. J. H.; Adriaens, A.; Dowsett, M.; Adams, F.

2006-07-01

A simple design for a caesium sputter cluster ion source compatible with commercially available secondary ion mass spectrometers is reported. This source has been tested with the Cameca IMS 4f instrument using the cluster Si n- and Cu n- ions, and will shortly be retrofitted to the floating low energy ion gun (FLIG) of the type used on the Cameca 4500/4550 quadruple instruments. Our experiments with surface characterization and depth profiling conducted to date demonstrate improvements of analytical capabilities of the SIMS instrument due to the non-additive enhancement of secondary ion emission and shorter ion ranges of polyatomic projectiles compared to atomic ions with the same impact energy.

The prevalence and correlates of severe depression in a cohort of Mexican teachers.

PubMed

Soria-Saucedo, Rene; Lopez-Ridaura, Ruy; Lajous, Martin; Wirtz, Veronika J

2018-07-01

Depression is among the 10 major causes of disability in Mexico. Yet, local contextual factors associated to the disorder remain poorly understood. We measured the impact of several factors on severe depression such as demographics, pharmacotherapy, multimorbidity, and unhealthy behaviors in Mexican teachers. A total of 43,845 Mexican female teachers from 12 Mexican states answered the Patient Health Questionnaire (PHQ9). Data were part the Mexican Teacher's Cohort prospective study, the largest ongoing cohort study in Latin America. Unadjusted and adjusted estimates assessed the impact of several contextual factors between severe versus mild-no depression cases. In total 7026 teachers (16%) had a PHQ9 score compatible with severe depression. From them, only 17% received psychotropics, compared to 60% for those with a formal diagnosis. Less than 5% of teachers with PHQ9 scores compatible with severe depression had a formal diagnosis. Adjusted analysis reported higher odds of pharmacotherapy, having ≥ 3 comorbidities, higher levels of couple, family and work stress, fewer hours of vigorous physical activity, higher alcohol consumption, and smoking as risk factors for severe depression. Also, rural residents of northern and center states appeared more severely depressed compared to their urban counterparts. On average, the PHQ9 scores differed by ~ 10 points between severe and mild-no depressed teachers. A cross-sectional design. Also, the study focused on female teachers between ages 25 and 74 years old, reducing the generalizability of the estimates. Under-diagnosis of clinical depression in Mexican teachers is concerning. Unhealthy behavior is associated with severe depression. The information collected in this study represents an opportunity to build prevention mechanisms of depression in high-risk subgroups of female educators and warrants improving access to mental care in Mexico. Copyright © 2018 Elsevier B.V. All rights reserved.

Improving diet sustainability through evolution of food choices: review of epidemiological studies on the environmental impact of diets

PubMed Central

Perignon, Marlène; Vieux, Florent; Soler, Louis-Georges; Masset, Gabriel

2017-01-01

The Food and Agriculture Organization defines sustainable diets as nutritionally adequate, safe, healthy, culturally acceptable, economically affordable diets that have little environmental impact. This review summarizes the studies assessing, at the individual level, both the environmental impact and the nutritional quality or healthiness of self-selected diets. Reductions in meat consumption and energy intake were identified as primary factors for reducing diet-related greenhouse gas emissions. The choice of foods to replace meat, however, was crucial, with some isocaloric substitutions possibly increasing total diet greenhouse gas emissions. Moreover, nutritional adequacy was rarely or only partially assessed, thereby compromising the assessment of diet sustainability. Furthermore, high nutritional quality was not necessarily associated with affordability or lower environmental impact. Hence, when identifying sustainable diets, each dimension needs to be assessed by relevant indicators. Finally, some nonvegetarian self-selected diets consumed by a substantial fraction of the population showed good compatibility with the nutritional, environmental, affordability, and acceptability dimensions. Altogether, the reviewed studies revealed the scarcity of standardized nationally representative data for food prices and environmental indicators and suggest that diet sustainability might be increased without drastic dietary changes. PMID:27974596

The perceived compatibility of safety and production expectations in hazardous occupations.

PubMed

McLain, David L; Jarrell, Kimberly A

2007-01-01

Safety hazards are unavoidable in many work environments. Employees must be both productive and safe, however, conflicting safety and production demands can negatively affect safety, production, or both. The employee's perception of the compatibility of management's safety and production expectations is a possible predictor of such consequences. This paper defines "safety-production compatibility" and describes how measures of safety-production compatibility, as well as safety pressure and production pressure, were developed. We used LISREL structural equation modeling to test the influences of safety-production compatibility, safety pressure, and production pressure on safe work behavior and interference with performing other work tasks. The 239 study participants were workers employed in diverse but hazardous occupations. Pressure to work safely was positively associated with safe work behavior. The perceived compatibility of safety and production demands positively influenced safe work behavior and reduced the interference of safety hazards performing other tasks. Safety-production compatibility was also found to mediate the relationship between trust in management and safe work behavior. The results of this field study suggest increased compatibility, and thus less conflict, between safety and production demands influences safe work behavior and the interference of safety hazards with performing other work tasks. More broadly, the worker's reaction to multiple work demands is a safety and performance influence. Safety management efforts that focus only on the hazards fail to eliminate many accidents because accidents arise from many factors including technology, safety climate, social influences, production, and safety demands. This study suggests that workers differ in their perception of the compatibility of safety and production demands. These differences will show up in safe work behavior, influencing the effectiveness of safety management efforts and the trust workers have in management's concern for safety.

Space Systems - Safety and Compatibility of Materials - Method to Determine the Ignition Susceptibility of Materials or Components to Particle Impact

NASA Technical Reports Server (NTRS)

Hirsch, David B.

2011-01-01

The scope of this International Technical Specification is to provide a method to determine the ignition susceptibility of materials and components to particle impact. The method can be used to determine the conditions at which ignition and consumption of a specimen material occurs when impacted by single or multiple particles entrained in a flow of gaseous oxygen (GOX). Alternatively, the method can be used to determine if a specific material or component is subject to ignition and sustained combustion in a given flow environment when impacted by single or multiple particles entrained in a flow of GOX.

Multiprocessor sparse L/U decomposition with controlled fill-in

NASA Technical Reports Server (NTRS)

Alaghband, G.; Jordan, H. F.

1985-01-01

Generation of the maximal compatibles of pivot elements for a class of small sparse matrices is studied. The algorithm involves a binary tree search and has a complexity exponential in the order of the matrix. Different strategies for selection of a set of compatible pivots based on the Markowitz criterion are investigated. The competing issues of parallelism and fill-in generation are studied and results are provided. A technque for obtaining an ordered compatible set directly from the ordered incompatible table is given. This technique generates a set of compatible pivots with the property of generating few fills. A new hueristic algorithm is then proposed that combines the idea of an ordered compatible set with a limited binary tree search to generate several sets of compatible pivots in linear time. Finally, an elimination set to reduce the matrix is selected. Parameters are suggested to obtain a balance between parallelism and fill-ins. Results of applying the proposed algorithms on several large application matrices are presented and analyzed.

The Future of Green Aviation

NASA Technical Reports Server (NTRS)

Edwards, Thomas

2012-01-01

Dr. Edwards'presentation provides an overview of aviation's economic impact in the U.S. including aviation's impact on environment and energy. The presentation discusses NASA's contributions to the advancement of commercial aircraft design highlighting the technology drivers and recent technology advancements for addressing community noise, energy efficiency and emissions. The presentation concludes with a preview of some of NASA's integrated systems solutions, such as novel aircraft concepts and advancements in propulsion that will enable the future of more environmentally compatible aviation.

Integrating Borrowed Records into a Database: Impact on Thesaurus Development and Retrieval.

ERIC Educational Resources Information Center

And Others; Kirtland, Monika

1980-01-01

Discusses three approaches to thesaurus and indexing/retrieval language maintenance for combined databases: reindexing, merging, and initial standardization. Two thesauri for a combined database are evaluated in terms of their compatibility, and indexing practices are compared. Tables and figures help illustrate aspects of the comparison. (SW)

Gender, Identity and Culture in Learning Physics

ERIC Educational Resources Information Center

Corbett, Katelin

2016-01-01

Student engagement in science, as defined by Iva Gurgel, Mauricio Pietrocola, and Graciella Watanabe, is of great importance because a student's perceived compatibility with science learning is highly influenced by personal identities, or how students see themselves in relations to the world. This can greatly impact their learning experiences. In…

Compatibility of Two Systematic Neonicotinoids, Imidacloprid and Thiamethoxam with various Natural Enemies of Agricultural Pests.

USDA-ARS?s Scientific Manuscript database

Two systemic neonicotinoids, imidacloprid and thiamethoxam, are widely used for residual control of a number of insect pests in cotton, vegetables, and citrus. We evaluated their impact on six species of beneficial arthropods including four parasitoid species, Aphytis melinus Gonatocerus ashmeadi, ...

Schools/Citizen Science: A Response to "The Future of Citizen Science"

ERIC Educational Resources Information Center

Weinstein, Matthew

2012-01-01

This paper builds on Mueller, Tippins, and Bryan's paper to ask how neoliberal restructuring impacts the form of appropriate and possible democratic science/education. It examines the compatibilities between antidemocratic tendencies of current schooling and common forms citizen science. It also clarifies several details regarding the street-medic…

INDOOR AIR QUALITY MODEL VERSION 1.0 DOCUMENTATION

EPA Science Inventory

The report presents a multiroom model for estimating the impact of various sources on indoor air quality (IAQ). The model is written for use on IBM-PC and compatible microcomputers. It is easy to use with a menu-driven user interface. Data are entered using a fill-in-a-form inter...

MATERNAL EFFECTS IN ADVANCED HYBRIDS OF GENETICALLY MODIFIED AND NON-GENETICALLY MODIFIED BRASSICA SPECIES

EPA Science Inventory

Identification of fitness traits potentially impacted by gene flow from genetically modified (GM) crops to compatible relatives is of interest in risk assessments for GM crops. Reciprocal crosses were made between GM canola, Brassica napus cv. RaideRR that expresses CP4 EPSPS fo...

36 CFR 13.142 - Transfer.

Code of Federal Regulations, 2010 CFR

2010-07-01

...; and (d) The continued use and occupancy will not adversely impact soils, vegetation, water or wildlife... PARK SYSTEM UNITS IN ALASKA Cabins Cabin Use-Leases Or Permits in Effect on December 2, 1980 § 13.142...) The continued use is appropriate and compatible with the values and purposes of the park area; (b) The...

The Issue of Compatibility between Cultural Integrity and Economic Development among Native American Tribes.

ERIC Educational Resources Information Center

Smith, Dean Howard

1994-01-01

Argues that economic development on American Indian reservations can strengthen a tribe's ability to maintain its culture if all development plans are formulated with consideration for their total societal impact. Discusses holistic approaches to development and business management, spiritual concerns, implications for higher education, and…

Observations from ERTS of overgrazing and cultivation impact on the earth's surface

NASA Technical Reports Server (NTRS)

Otterman, J.; Walter, L. S.; Schmugge, T. J.

1976-01-01

ERTS-1 imagery was surveyed for cases of anthropogenic impact, similar to that in the Sinai, evidenced by the Sinai/Negev demarcation line. Reflectivities in several such cases were analyzed using ERTS computer compatible tapes. Sharp increases of surface reflectivity show the severe impact of overgrazing found in several places around the world. Agricultural cultivation can also result in pronounced change of reflectivities, as evidenced by the Montana, USA/Canada demarcation line. Such processes have probably been going on since prehistoric times, increasing with the human population and with the population of the grazing herds.

MIPs in Aqueous Environments.

PubMed

Wan, Ying-chun; Ma, Hui-ting; Lu, Bin

2015-01-01

When organic solvent-compatible molecularly imprinted polymers (MIPs) are used in aqueous environment, how to reduce nonspecific binding is a major challenge. By modifying the binding solvents and introducing appropriate washing and elution steps, even relatively hydrophobic MIPs can gain optimal rebinding selectivity in aqueous conditions. Furthermore, water-compatible MIPs that can be used to treat aqueous samples directly have been prepared. The use of hydrophilic co-monomers, the controlled surface modification through controlled radical polymerization, and the new interfacial molecular imprinting methods are different strategies to prepare water-compatible MIPs. By combining MIPs with other techniques, both organic solvent-compatible and water-compatible MIPs can display better functional performances in aqueous conditions. Intensive studies on MIPs in aqueous conditions can provide new MIPs with much-improved compatibilities that will lead to more interesting applications in biomedicine and biotechnology.

Bioresearch Module Design Definition and Space Shuttle Vehicle Integration Study. Volume 1: Basic Report

NASA Technical Reports Server (NTRS)

Lang, A. L., Jr.

1971-01-01

Preliminary designs of the Bioexplorer spacecraft, developed in an earlier study program, are analyzed and updated to conform to a new specification which includes use of both the Scout and the space shuttle vehicle for launch. The updated spacecraft is referred to as bioresearch module. It is capable of supporting a variety of small biological experiments in near-earth and highly elliptical earth orbits. The baseline spacecraft design is compatible with the Scout launch vehicle. Inboard profile drawings, weight statements, interface drawings, and spacecraft parts and aerospace ground equipment lists are provided to document the design. The baseline design was analyzed to determine the design and cost impact of a set of optional features. These include reduced experiment power and thermal load, addition of an experiment television monitor, and replacement of VHF with S-band communications. The impact of these options on power required, weight change and cost is defined.

Evaluation of the impact of shiftwork and chronotype on the workers of the imprint and cutting/welding sectors of a flexible packaging manufacturer.

PubMed

de M Guimarães, L B; Pessa, S L R; Biguelini, C

2012-01-01

This article presents a study on the impact of shiftwork and chronotype on the perception of the work conditions, workload and adjustment to shiftwork by the workers of two sectors of a flexible packaging manufacturer, which operates in three fixed shifts. The workers are allocated in one of the shifts (morning, evening and night shifts) without evaluation of their chronotype and/or social needs. The workers' evaluation of the shift system and their work show that they prefer a fixed shift and to work in a shift compatible with their chronotype. The workers with chonotype uncompatible with the shift time tend to be less satisfied with the work conditions and content and feel more discomfort/pain.

Concepts for on board satellite image registration. Volume 4: Impact of data set selection on satellite on board signal processing

NASA Technical Reports Server (NTRS)

Ruedger, W. H.; Aanstoos, J. V.; Snyder, W. E.

1982-01-01

The NASA NEEDS program goals present a requirement for on-board signal processing to achieve user-compatible, information-adaptive data acquisition. This volume addresses the impact of data set selection on data formatting required for efficient telemetering of the acquired satellite sensor data. More specifically, the FILE algorithm developed by Martin-Marietta provides a means for the determination of those pixels from the data stream effects an improvement in the achievable system throughput. It will be seen that based on the lack of statistical stationarity in cloud cover, spatial distribution periods exist where data acquisition rates exceed the throughput capability. The study therefore addresses various approaches to data compression and truncation as applicable to this sensor mission.

Mitigation of short-term disturbance negative impacts in the agent-based model of a production companies network

NASA Astrophysics Data System (ADS)

Shevchuk, G. K.; Berg, D. B.; Zvereva, O. M.; Medvedeva, M. A.

2017-11-01

This article is devoted to the study of a supply chain disturbance impact on manufacturing volumes in a production system network. Each network agent's product can be used as a resource by other system agents (manufacturers). A supply chain disturbance can lead to operating cease of the entire network. Authors suggest using of short-term partial resources reservation to mitigate negative consequences of such disturbances. An agent-based model with a reservation algorithm compatible with strategies for resource procurement in terms of financial constraints was engineered. This model works in accordance with the static input-output Leontief 's model. The results can be used for choosing the ways of system's stability improving, and protecting it from various disturbances and imbalance.

Pooling job physical exposure data from multiple independent studies in a consortium study of carpal tunnel syndrome

PubMed Central

Kapellusch, Jay M.; Garg, Arun; Bao, Stephen S.; Silverstein, Barbara A.; Burt, Susan E.; Dale, Ann Marie; Evanoff, Bradley A.; Gerr, Frederic E.; Harris-Adamson, Carisa; Hegmann, Kurt T.; Merlino, Linda A.; Rempel, David M.

2015-01-01

Pooling data from different epidemiological studies of musculoskeletal disorders (MSDs) is necessary to improve statistical power and to more precisely quantify exposure–response relationships for MSDs. The pooling process is difficult and time-consuming, and small methodological differences could lead to different exposure–response relationships. A subcommittee of a six-study research consortium studying carpal tunnel syndrome: (i) visited each study site, (ii) documented methods used to collect physical exposure data and (iii) determined compatibility of exposure variables across studies. Certain measures of force, frequency of exertion and duty cycle were collected by all studies and were largely compatible. A portion of studies had detailed data to investigate simultaneous combinations of force, frequency and duration of exertions. Limited compatibility was found for hand/wrist posture. Only two studies could calculate compatible Strain Index scores, but Threshold Limit Value for Hand Activity Level could be determined for all studies. Challenges of pooling data, resources required and recommendations for future researchers are discussed. PMID:23697792

Orbital transfer rocket engine technology program: Soft wear ring seal technology

NASA Technical Reports Server (NTRS)

Lariviere, Brian W.

1992-01-01

Liquid oxygen (LOX) compatibility tests, including autogenous ignition, promoted ignition, LOX impact tests, and friction and wear tests on different PV products were conducted for several polymer materials as verification for the implementation of soft wear ring seals in advanced rocket engine turbopumps. Thermoplastics, polyimide based materials, and polyimide-imide base materials were compared for oxygen compatibility, specific wear coefficient, wear debris production, and heat dissipation mechanisms. A thermal model was generated that simulated the frictional heating input and calculated the surface temperature and temperature distribution within the seal. The predictions were compared against measured values. Heat loads in the model were varied to better match the test data and determine the difference between the measured and the calculated coefficients of friction.

Building Systems Information Clearinghouse Special Report Number One: Manufacturers Compatibility Study.

ERIC Educational Resources Information Center

Boice, John R., Ed.

BSIC has selected data for inclusion, and a method of presentation that-- (1) provides preliminary data, in comparable form, about all relevant systems building products, (2) surveys within the limits imposed, the problems of compatibility between subsystem components and to identify components which are compatible with one another, (3) identifies…

N2pc is modulated by stimulus-stimulus, but not by stimulus-response incompatibilities.

PubMed

Cespón, J; Galdo-Álvarez, S; Díaz, F

2013-04-01

Studies of the N2pc in Simon-type tasks have revealed inconsistent results. That is, N2pc was only modulated when a stimulus-stimulus (S-S) overlap covaries with the stimulus-response (S-R) overlap. The present study aimed to establish whether N2pc is modulated by the S-R or by the S-S overlap. Therefore, we designed a Simon task requiring response to a colour stimulus (an arrow) with two irrelevant dimensions (position and direction). The following conditions were thus generated: compatible direction-compatible position (CDCP); incompatible direction-compatible position (IDCP); compatible direction-incompatible position (CDIP); and incompatible direction-incompatible position (IDIP). In IDCP and CDIP, both irrelevant dimensions conveyed contradictory spatial information (S-S incompatibility), while compatibility between both irrelevant dimensions occurred in CDCP and IDIP (the direction indicated was compatible with stimulus position). The N2pc amplitude was smaller in IDCP and CDIP than in CDCP and IDIP, what suggests that N2pc was modulated by S-S incompatibility and not by S-R incompatibilities. Copyright © 2013 Elsevier B.V. All rights reserved.

Ridge Formation And De-spinning Of Iapetus Via An Impact-generated Satellite

NASA Astrophysics Data System (ADS)

Levison, Harold F.; Walsh, K. J.; Barr, A. C.; Dones, L.

2011-04-01

We present a scenario for building the equatorial ridge and de-spinning Iapetus through an impact-generated disk and satellite. This impact puts debris into orbit, forming a ring inside the Roche limit and a satellite outside. This satellite rapidly pushes the ring material down to the surface of Iapetus, and then itself tidally evolves outward, thereby helping to de-spin Iapetus. This scenario can de-spin Iapetus an order of magnitude faster than when tides due to Saturn act alone, almost independently of its interior geophysical evolution. Eventually, the satellite is stripped from its orbit by Saturn. The range of satellite and impactor masses required is compatible with the estimated impact history of Iapetus.

Ridge formation and de-spinning of Iapetus via an impact-generated satellite

NASA Astrophysics Data System (ADS)

Levison, H. F.; Walsh, K. J.; Barr, A. C.; Dones, L.

2011-08-01

We present a scenario for building the equatorial ridge and de-spinning Iapetus through an impact-generated disk and satellite. This impact puts debris into orbit, forming a ring inside the Roche limit and a satellite outside. This satellite rapidly pushes the ring material down to the surface of Iapetus, and then itself tidally evolves outward, thereby helping to de-spin Iapetus. This scenario can de-spin Iapetus an order of magnitude faster than when tides due to Saturn act alone, almost independently of its interior geophysical evolution. Eventually, the satellite is stripped from its orbit by Saturn. The range of satellite and impactor masses required is compatible with the estimated impact history of Iapetus.

Real-time endoscopic guidance using near-infrared fluorescent light for thoracic surgery

NASA Astrophysics Data System (ADS)

Venugopal, Vivek; Stockdale, Alan; Neacsu, Florin; Kettenring, Frank; Frangioni, John V.; Gangadharan, Sidharta P.; Gioux, Sylvain

2013-03-01

Lung cancer is the leading cause of cancer death in the United States, accounting for 28% of all cancer deaths. Standard of care for potentially curable lung cancer involves preoperative radiographic or invasive staging, followed by surgical resection. With recent adjuvant chemotherapy and radiation studies showing a survival advantage in nodepositive patients, it is crucial to accurately stage these patients surgically in order to identify those who may benefit. However, lymphadenectomy in lung cancer is currently performed without guidance, mainly due to the lack of tools permitting real-time, intraoperative identification of lymph nodes. In this study we report the design and validation of a novel, clinically compatible near-infrared (NIR) fluorescence thoracoscope for real-time intraoperative guidance during lymphadenectomy. A novel, NIR-compatible, clinical rigid endoscope has been designed and fabricated, and coupled to a custom source and a dual channel camera to provide simultaneous color and NIR fluorescence information to the surgeon. The device has been successfully used in conjunction with a safe, FDA-approved fluorescent tracer to detect and resect mediastinal lymph nodes during thoracic surgery on Yorkshire pigs. Taken together, this study lays the foundation for the clinical translation of endoscopic NIR fluorescence intraoperative guidance and has the potential to profoundly impact the management of lung cancer patients.

Reproductive biology of the native forage grass Trichloris crinita (Poaceae, Chloridoideae).

PubMed

Kozub, P C; Barboza, K; Galdeano, F; Quarin, C L; Cavagnaro, J B; Cavagnaro, P F

2017-05-01

Trichloris crinita is a perennial forage grass species native to arid regions of the American continent. Due to its extensive area of distribution, good forage quality and resistance to drought and grazing, this species is widely utilised as forage and for revegetation purposes in environments with low water availability. Despite its importance, genetic improvement of T. crinita has been very limited, partly as consequence of the lack of knowledge on its mode of reproduction. In the present work, we studied the reproductive biology of T. crinita by means of embryological analyses, flow cytometric seed screen (FCSS), self-compatibility tests and progeny testing with morphological and molecular markers. Cytological analyses revealed embryo sacs with eight nuclei and of Polygonum type for all T. crinita accessions analysed. FCSS histograms exhibited two clear peaks corresponding to 2C and 3C DNA content, indicating embryo sacs of sexual origin. Controlled pollination experiments designed to evaluate seed set (%) demonstrated that T. crinita is self-compatible, whereas results from morphological and simple sequence repeat (SSR) marker analysis of progeny revealed lack of outcrossing. Together, these results indicate that T. crinita reproduces sexually. It is a self-compatible and autogamous species. It is expected that these data will have a positive impact in the genetics and breeding of this species, and therefore contribute to its proper utilisation in arid regions. © 2017 German Botanical Society and The Royal Botanical Society of the Netherlands.

Environmental impact assessment of structural flood mitigation measures by a rapid impact assessment matrix (RIAM) technique: a case study in Metro Manila, Philippines.

PubMed

Gilbuena, Romeo; Kawamura, Akira; Medina, Reynaldo; Amaguchi, Hideo; Nakagawa, Naoko; Bui, Duong Du

2013-07-01

In recent decades, the practice of environmental impact assessment (EIA) in the planning processes of infrastructure projects has created significant awareness on the benefits of environmentally sound and sustainable urban development around the world. In the highly urbanized megacities in the Philippines, like Metro Manila, high priority is given by the national government to structural flood mitigation measures (SFMM) due to the persistently high frequency of flood-related disasters, which are exacerbated by the on-going effects of climate change. EIA thus, should be carefully and effectively executed to maximize the potential benefits of the SFMM. The common practice of EIA in the Philippines is generally qualitative and lacks clear methodology in evaluating multi-criteria systems. Thus, this study proposes the use of the rapid impact assessment matrix (RIAM) technique to provide a method that would systematically and quantitatively evaluate the socio-economic and environmental impacts of planned SFMM in Metro Manila. The RIAM technique was slightly modified to fit the requirements of this study. The scale of impact was determined for each perceived impact, and based on the results, the planned SFMM for Metro Manila will likely bring significant benefits; however, significant negative impacts may also likely occur. The proposed modifications were found to be highly compatible with RIAM, and the results of the RIAM analysis provided a clear view of the impacts associated with the implementation of SFMM projects. This may prove to be valuable in the practice of EIA in the Philippines. Copyright © 2013 Elsevier B.V. All rights reserved.

Clinical Information System Post-Adoption Evaluation at the Georges Pompidou University Hospital

PubMed Central

Palm, Jean-Marc; Dart, Thierry; Dupuis, Isabelle; Leneveut, Laurence; Degoulet, Patrice

2010-01-01

The evaluation of a clinical information system (CIS) at different stages of deployment and routine use is a key factor to improve acceptability and use by health professionals. This paper examines on an expectation-confirmation model (ITPAM) the relationships between the determinants of success of a CIS in a cross-sectional survey performed at the Georges Pompidou University Hospital (HEGP). Results for the groups of physicians and nurses that replied to the survey (n=312) suggest that health professional satisfaction (overall R2=0.60) is determined by the quality of user support (r=.21, p=<0001), ease of use (r=.19, p=<0001), confirmation of expectations (r=.15, p=.0037), usefulness (r=.12, p=.0068), and compatibility (r=.10, p=.0206). The best predictor of physician satisfaction (R2=0.71) was compatibility (r=.21, p=.0072) whereas for nurses (R2=0.52) it was user support (r=.22, p=<0001) and ease of use (r=.22, p=.0001). Confirmation of expectations had an impact on post-adoption expectation and user’s satisfaction, and confirms its importance for CIS evaluation studies. PMID:21347045

Clinical information system post-adoption evaluation at the georges pompidou university hospital.

PubMed

Palm, Jean-Marc; Dart, Thierry; Dupuis, Isabelle; Leneveut, Laurence; Degoulet, Patrice

2010-11-13

The evaluation of a clinical information system (CIS) at different stages of deployment and routine use is a key factor to improve acceptability and use by health professionals. This paper examines on an expectation-confirmation model (ITPAM) the relationships between the determinants of success of a CIS in a cross-sectional survey performed at the Georges Pompidou University Hospital (HEGP). Results for the groups of physicians and nurses that replied to the survey (n=312) suggest that health professional satisfaction (overall R(2)=0.60) is determined by the quality of user support (r=.21, p=<0001), ease of use (r=.19, p=<0001), confirmation of expectations (r=.15, p=.0037), usefulness (r=.12, p=.0068), and compatibility (r=.10, p=.0206). The best predictor of physician satisfaction (R(2)=0.71) was compatibility (r=.21, p=.0072) whereas for nurses (R(2)=0.52) it was user support (r=.22, p=<0001) and ease of use (r=.22, p=.0001). Confirmation of expectations had an impact on post-adoption expectation and user's satisfaction, and confirms its importance for CIS evaluation studies.

A robust fingerprint matching algorithm based on compatibility of star structures

NASA Astrophysics Data System (ADS)

Cao, Jia; Feng, Jufu

2009-10-01

In fingerprint verification or identification systems, most minutiae-based matching algorithms suffered from the problems of non-linear distortion and missing or faking minutiae. Local structures such as triangle or k-nearest structure are widely used to reduce the impact of non-linear distortion, but are suffered from missing and faking minutiae. In our proposed method, star structure is used to present local structure. A star structure contains various number of minutiae, thus, it is more robust with missing and faking minutiae. Our method consists of four steps: 1) Constructing star structures at minutia level; 2) Computing similarity score for each structure pair, and eliminating impostor matched pairs which have the low scores. As it is generally assumed that there is only linear distortion in local area, the similarity is defined by rotation and shifting. 3) Voting for remained matched pairs according to the compatibility between them, and eliminating impostor matched pairs which gain few votes. The concept of compatibility is first introduced by Yansong Feng [4], the original definition is only based on triangles. We define the compatibility for star structures to adjust to our proposed algorithm. 4) Computing the matching score, based on the number of matched structures and their voting scores. The score also reflects the fact that, it should get higher score if minutiae match in more intensive areas. Experiments evaluated on FVC 2004 show both effectiveness and efficiency of our methods.

Revisioning Assessment through a Children's Rights Approach: Implications for Policy, Process and Practice

ERIC Educational Resources Information Center

Elwood, Jannette; Lundy, Laura

2010-01-01

The linkage between the impact of assessment and compliance with children's rights is a connection, which although seemingly obvious, is nonetheless rarely made, particularly by governments, which, as signatories to the relevant human rights treaties, have the primary responsibility for ensuring that educational practice is compatible with…

Subsurface Manure Application for Conservation Tillage and Pasture Soils and Their Impact on the Nitrogen Balance

USDA-ARS?s Scientific Manuscript database

Incorporating manures into soil with conventional tillage is an effective means to reduce ammonia volatilization and conserve manure nitrogen. However, it is not possible in pasture and is not readily compatible with high-residue soil conservation practices for rowcrops. A variety of manure injecto...

Impact of Crop Management Diagnostic Clinics on Advisors' Recommendations and Producer Practices

ERIC Educational Resources Information Center

Wortmann, Charles S.; Glewen, Keith L.; Williams, Susan N.

2011-01-01

Adoption resulting from University of Nebraska-Lincoln Crop Management Diagnostic Clinic (CMDC) field days was evaluated using an on-line survey. Respondents reported significant gains in skills because of CMDC, but the gains were similar across skill areas. Adoption was affected by compatibility with the cropping system, relative advantage,…

Alterations on flow variability due to converting hardwood forests to pine

Treesearch

Yusuf Serengil; Wayne T. Swank; James M. Vose

2012-01-01

Flow variability is a potential indicator of land use impacts on aquatic ecosystems and a dominating factor for lotic habitats. Vegetation management effects on the stream habitat conditions must be better understood to propose forest management activities that are compatible with general ecosystem management objectives (integrity, diversity, sustainability, etc.). In...

Compatability of timber salvage operations with watershed values

Treesearch

Roger J. Poff

1989-01-01

Timber salvage on the Indian Burn was carried out without compromising watershed values. In some cases watershed condition was actually improved by providing ground cover, by removing trees that were a source of erosive water droplets, and by breaking up hydrophobic soil layers. Negative impacts of timber salvage on watersheds were minimized by using an...

Identifying new lignin bioengineering targets: impact of epicatechin, quercetin glycoside, and gallate derivatives on the lignification and fermentation of maize cell walls

USDA-ARS?s Scientific Manuscript database

Apoplastic targeting of secondary metabolites compatible with monolignol polymerization may provide new avenues for designing lignins that are less inhibitory toward fiber fermentation. To identify suitable monolignol substitutes, we artificially lignified maize cell walls with normal monolignols pl...

Extruded/injection-molded composites containing unripe plantain flour, ethylene vinyl-alcohol and glycerol: Evaluation of color, mechanical property and biodegradability

USDA-ARS?s Scientific Manuscript database

Extruded/injection-molded composites were produced from plantain flour blended with ethylene vinyl-alcohol (EVA) and glycerol. Scanning electron microscopy showed composites had a smooth surface and excellent compatibility between plantain flour, EVA and glycerol. The impact of increased plantain fl...

Algebraic and geometric structures of analytic partial differential equations

NASA Astrophysics Data System (ADS)

Kaptsov, O. V.

2016-11-01

We study the problem of the compatibility of nonlinear partial differential equations. We introduce the algebra of convergent power series, the module of derivations of this algebra, and the module of Pfaffian forms. Systems of differential equations are given by power series in the space of infinite jets. We develop a technique for studying the compatibility of differential systems analogous to the Gröbner bases. Using certain assumptions, we prove that compatible systems generate infinite manifolds.

Breeding graft-compatible Douglas-fir rootstocks (Pseudotsuga menziesii (Mirb.) Franco).

Treesearch

D.L. Copes

1999-01-01

A study encompassing 24 years was conducted to determine if a breeding program could produce highly graft-compatible rootstocks. Twenty-seven trees of apparent high graft compatibility were selected and crossed to produce 226 control-pollinated families. Seedlings were grown, field planted, and grafted with test scions. Graft unions from field tests were evaluated...

Population genetic variation in the tree fern Alsophila spinulosa (Cyatheaceae): effects of reproductive strategy.

PubMed

Wang, Ting; Su, Yingjuan; Li, Yuan

2012-01-01

Essentially all ferns can perform both sexual and asexual reproduction. Their populations represent suitable study objects to test the population genetic effects of different reproductive systems. Using the diploid homosporous fern Alsophila spinulosa as an example species, the main purpose of this study was to assess the relative impact of sexual and asexual reproduction on the level and structure of population genetic variation. Inter-simple sequence repeats analysis was conducted on 140 individuals collected from seven populations (HSG, LCH, BPC, MPG, GX, LD, and ZHG) in China. Seventy-four polymorphic bands discriminated a total of 127 multilocus genotypes. Character compatibility analysis revealed that 50.0 to 70.0% of the genotypes had to be deleted in order to obtain a tree-like structure in the data set from populations HSG, LCH, MPG, BPC, GX, and LD; and there was a gradual decrease of conflict in the data set when genotypes with the highest incompatibility counts were successively deleted. In contrast, in population ZHG, only 33.3% of genotypes had to be removed to achieve complete compatibility in the data set, which showed a sharp decline in incompatibility upon the deletion of those genotypes. All populations examined possessed similar levels of genetic variation. Population ZHG was not found to be more differentiated than the other populations. Sexual recombination is the predominant source of genetic variation in most of the examined populations of A. spinulosa. However, somatic mutation contributes most to the genetic variation in population ZHG. This change of the primary mode of reproduction does not cause a significant difference in the population genetic composition. Character compatibility analysis represents an effective approach to separate the role of sexual and asexual components in shaping the genetic pattern of fern populations.

HLA AND CROSS·REACTIVE ANTIGEN GROUP MATCHING FOR CADAVER KIDNEY ALLOCATION1

PubMed Central

Starzl, Thomas E.; Eliasziw, Michael; Gjertson, David; Terasaki, Paul I.; Fung, John J.; Trucco, Massimo; Martell, Joan; McMichael, John; Scantlebury, Velma; Shapiro, Ron; Donner, Allan

2010-01-01

Background Allocation of cadaver kidneys by graded human leukocyte antigen (HLA) compatibility scoring arguably has had little effect on overall survival while prejudicing the transplant candidacy of African-American and other hard to match populations. Consequently, matching has been proposed of deduced amino acid residues of the individual HLA molecules shared by cross-reactive antigen groups (CREGs). We have examined the circumstances under which compatibility with either method impacted graft survival. Methods Using Cox proportional hazards regression modeling, we studied the relationship between levels of conventional HLA mismatch and other donor and recipient factors on primary cadaver kidney survival between 1981 and 1995 at the University of Pittsburgh (n=1,780) and in the United Network for Organ Sharing (UNOS) Scientific Registry during 1991–1995 (n=31,291). The results were compared with those obtained by the matching of amino acid residues that identified CREG-compatible cases with as many as four (but not five and six) HLA mismatches. Results With more than one HLA mismatch (>85% of patients in both series), most of the survival advantage of a zero mismatch was lost. None of the HLA loci were “weak.” In the UNOS (but not Pittsburgh) category of one-HLA mismatch (n=1334), a subgroup of CREG-matched recipients (35.3%) had better graft survival than the remaining 64.7%, who were CREG-mismatched. There was no advantage of a CREG match in the two- to four-HLA incompatibility tiers. Better graft survival with tacrolimus was observed in both the Pittsburgh and UNOS series. Conclusions Obligatory national sharing of cadaver kidneys is justifiable only for zero-HLA-mismatched kidneys. The potential value of CREG matching observed in the one-HLA-mismatched recipients of the UNOS (but not the Pittsburgh) experience deserves further study. PMID:9381546

Multimission Modular Spacecraft Ground Support Software System (MMS/GSSS) state-of-the-art computer systems/ compatibility study

NASA Technical Reports Server (NTRS)

1980-01-01

The compatibility of the Multimission Modular Spacecraft (MMS) Ground Support Software System (GSSS), currently operational on a ModComp IV/35, with the VAX 11/780 system is discussed. The compatibility is examined in various key areas of the GSSS through the results of in depth testing performed on the VAX 11/780 and ModComp IV/35 systems. The compatibility of the GSSS with the ModComp CLASSIC is presented based upon projections from ModComp supplied literature.

Empirical study of fuzzy compatibility measures and aggregation operators

NASA Astrophysics Data System (ADS)

Cross, Valerie V.; Sudkamp, Thomas A.

1992-02-01

Two fundamental requirements for the generation of support using incomplete and imprecise information are the ability to measure the compatibility of discriminatory information with domain knowledge and the ability to fuse information obtained from disparate sources. A generic architecture utilizing the generalized fuzzy relational database model has been developed to empirically investigate the support generation capabilities of various compatibility measures and aggregation operators. This paper examines the effectiveness of combinations of compatibility measures from the set-theoretic, geometric distance, and logic- based classes paired with t-norm and generalized mean families of aggregation operators.

Thermodynamic analysis of chemical compatibility of several reinforcement materials with niobium aluminides

NASA Technical Reports Server (NTRS)

Misra, Ajay K.

1989-01-01

Chemical compatibility of several reinforcement materials with three niobium aluminides, Nb3Al, Nb2Al, and NbAl3, were examined from thermodynamic considerations. The reinforcement materials considered in this study include carbides, borides, nitrides, oxides, silicides, and Engel-Brewer compounds. Thermodynamics of the Nb-Al system were reviewed and activities of Nb and Al were derived at desired calculation temperatures. Criteria for chemical compatibility between the reinforcement material and Nb-Al compounds have been defined and several chemically compatible reinforcement materials have been identified.

Dual-task performance with ideomotor-compatible tasks: is the central processing bottleneck intact, bypassed, or shifted in locus?

NASA Technical Reports Server (NTRS)

Lien, Mei-Ching; McCann, Robert S.; Ruthruff, Eric; Proctor, Robert W.

2005-01-01

The present study examined whether the central bottleneck, assumed to be primarily responsible for the psychological refractory period (PRP) effect, is intact, bypassed, or shifted in locus with ideomotor (IM)-compatible tasks. In 4 experiments, factorial combinations of IM- and non-IM-compatible tasks were used for Task 1 and Task 2. All experiments showed substantial PRP effects, with a strong dependency between Task 1 and Task 2 response times. These findings, along with model-based simulations, indicate that the processing bottleneck was not bypassed, even with two IM-compatible tasks. Nevertheless, systematic changes in the PRP and correspondence effects across experiments suggest that IM compatibility shifted the locus of the bottleneck. The findings favor an engage-bottleneck-later hypothesis, whereby parallelism between tasks occurs deeper into the processing stream for IM- than for non-IM-compatible tasks, without the bottleneck being actually eliminated.

New advances in MR-compatible bioartificial liver

PubMed Central

Jeffries, Rex E.; Macdonald, Jeffrey M.

2015-01-01

MR-compatible bioartificial liver (BAL) studies have been performed for 30 years and are reviewed. There are two types of study: (i) metabolism and drug studies using multinuclear MRS; primarily short-term (< 8 h) studies; (ii) the use of multinuclear MRS and MRI to noninvasively define the features and functions of BAL systems for long-term liver tissue engineering. In the latter, these systems often undergo not only modification of the perfusion system, but also the construction of MR radiofrequency probes around the bioreactor. We present novel MR-compatible BALs and the use of multinuclear MRS (13C, 19F, 31P) for the noninvasive monitoring of their growth, metabolism and viability, as well as 1H MRI methods for the determination of flow profiles, diffusion, cell distribution, quality assurance and bioreactor integrity. Finally, a simple flexible coil design and circuit, and life support system, are described that can make almost any BAL MR-compatible. PMID:22351642

Harnessing Scientific and Technological Advances to Improve Equity in Kidney Allocation Policies.

PubMed

Tambur, A R; Audry, B; Antoine, C; Suberbielle, C; Glotz, D; Jacquelinet, C

2017-12-01

We reported that current assignment of HLA-DQ is a barrier to organ allocation. Here we simulated the impact of incorporating HLA-DQ antigens and antibodies as A/B and αβ allelic variants, respectively, on calculated panel reactive antibody (cPRA) and probability of finding potential compatible donors (PCD). A cohort of 1224 donors and 2075 sensitized candidates was analyzed using HLA-DQαβ allelic (study) versus serologic (current practice) nomenclature. A significant (p < 10 -4 ) decrease in cPRA was observed with higher impact for male versus female, and first transplant versus retransplant (p < 10 -4 ), affecting mostly patients with moderate cPRA (30-80%). Consequently, the number of patients qualifying for 100% cPRA points according to the United Network for Organ Sharing-Kidney Allocation System decreased by 37%. More critically, by using allelic versus serologic nomenclature for HLA-DQ, the number of PCDs for all patients was increased, with male and first-transplant patients showing a higher expansion compared with female and retransplants. Patients of blood group O showed the highest benefit. The goal of reporting unacceptable antigens is to improve accuracy of virtual crossmatching and increase the likelihood of finding immunologically compatible donors. Our simulation provides strong support for the need to re-evaluate the use of allele typing and how HLA-DQ antigens and antibodies are incorporated into allocation policies to ensure equity. © 2017 The American Society of Transplantation and the American Society of Transplant Surgeons.

Improving diet sustainability through evolution of food choices: review of epidemiological studies on the environmental impact of diets.

PubMed

Perignon, Marlène; Vieux, Florent; Soler, Louis-Georges; Masset, Gabriel; Darmon, Nicole

2017-01-01

The Food and Agriculture Organization defines sustainable diets as nutritionally adequate, safe, healthy, culturally acceptable, economically affordable diets that have little environmental impact. This review summarizes the studies assessing, at the individual level, both the environmental impact and the nutritional quality or healthiness of self-selected diets. Reductions in meat consumption and energy intake were identified as primary factors for reducing diet-related greenhouse gas emissions. The choice of foods to replace meat, however, was crucial, with some isocaloric substitutions possibly increasing total diet greenhouse gas emissions. Moreover, nutritional adequacy was rarely or only partially assessed, thereby compromising the assessment of diet sustainability. Furthermore, high nutritional quality was not necessarily associated with affordability or lower environmental impact. Hence, when identifying sustainable diets, each dimension needs to be assessed by relevant indicators. Finally, some nonvegetarian self-selected diets consumed by a substantial fraction of the population showed good compatibility with the nutritional, environmental, affordability, and acceptability dimensions. Altogether, the reviewed studies revealed the scarcity of standardized nationally representative data for food prices and environmental indicators and suggest that diet sustainability might be increased without drastic dietary changes. © The Author(s) 2016. Published by Oxford University Press on behalf of the International Life Sciences Institute.

An experimental study on the compatibility of acetone with aluminum flat-plate heat pipes

NASA Astrophysics Data System (ADS)

Hsieh, Jui-Ching; Lin, David T. W.; Huang, Hsin-Jung; Yang, Tzu-Wei

2014-04-01

This study investigates the compatibility of aluminum flat-plate heat pipes (FPHPs) used for filling acetone as a working fluid after long-term operation of and the non-condensable gas (NCG) exhausting process. The rate of NCG generation substantially decreased after conducting the NCG exhausting process, proving the compatibility of acetone with the aluminum FPHPs. However, the thermal resistance was not enhanced because hydroxide bayerite (Al(OH)3) was generated as a product of the reaction.

Advanced Reconnaissance System Component Reliability Study

DTIC Science & Technology

1956-07-31

dielectrics. Gaseous dielectrics such as sulphur hexafluoride and ’ fluorocarbons at two to three atmospheres. Fluorinated liquid dielectrics. 3) The...limits. (2) determine compatibility with varnish treatments, (3) compatibility in a complete insulation system. Mechanical and thermal limits of...of a varnish to have good • adhersion, provide an element of flexibility and be chemically compatible with’the wire it is impregnating.. Factors of

Lethal aggression in Pan is better explained by adaptive strategies than human impacts.

PubMed

Wilson, Michael L; Boesch, Christophe; Fruth, Barbara; Furuichi, Takeshi; Gilby, Ian C; Hashimoto, Chie; Hobaiter, Catherine L; Hohmann, Gottfried; Itoh, Noriko; Koops, Kathelijne; Lloyd, Julia N; Matsuzawa, Tetsuro; Mitani, John C; Mjungu, Deus C; Morgan, David; Muller, Martin N; Mundry, Roger; Nakamura, Michio; Pruetz, Jill; Pusey, Anne E; Riedel, Julia; Sanz, Crickette; Schel, Anne M; Simmons, Nicole; Waller, Michel; Watts, David P; White, Frances; Wittig, Roman M; Zuberbühler, Klaus; Wrangham, Richard W

2014-09-18

Observations of chimpanzees (Pan troglodytes) and bonobos (Pan paniscus) provide valuable comparative data for understanding the significance of conspecific killing. Two kinds of hypothesis have been proposed. Lethal violence is sometimes concluded to be the result of adaptive strategies, such that killers ultimately gain fitness benefits by increasing their access to resources such as food or mates. Alternatively, it could be a non-adaptive result of human impacts, such as habitat change or food provisioning. To discriminate between these hypotheses we compiled information from 18 chimpanzee communities and 4 bonobo communities studied over five decades. Our data include 152 killings (n = 58 observed, 41 inferred, and 53 suspected killings) by chimpanzees in 15 communities and one suspected killing by bonobos. We found that males were the most frequent attackers (92% of participants) and victims (73%); most killings (66%) involved intercommunity attacks; and attackers greatly outnumbered their victims (median 8:1 ratio). Variation in killing rates was unrelated to measures of human impacts. Our results are compatible with previously proposed adaptive explanations for killing by chimpanzees, whereas the human impact hypothesis is not supported.

Charming new physics in rare B decays and mixing?

NASA Astrophysics Data System (ADS)

Jäger, Sebastian; Leslie, Kirsten; Kirk, Matthew; Lenz, Alexander

2018-01-01

We conduct a systematic study of the impact of new physics in quark-level b →c c ¯ s transitions on B physics, in particular rare B decays and B -meson lifetime observables. We find viable scenarios where a sizable effect in rare semileptonic B decays can be generated, compatible with experimental indications and with a possible dependence on the dilepton invariant mass, while being consistent with constraints from radiative B decay and the measured Bs width difference. We show how, if the effect is generated at the weak scale or beyond, strong renormalization-group effects can enhance the impact on semileptonic decays while leaving radiative B decay largely unaffected. A good complementarity of the different B -physics observables implies that precise measurements of lifetime observables at LHCb may be able to confirm, refine, or rule out this scenario.

Impact sensitivity of materials in contact with liquid and gaseous oxygen at high pressure

NASA Technical Reports Server (NTRS)

Schwinghamer, R. J.

1972-01-01

As a result of the Apollo 13 incident, increased emphasis is being placed on materials compatibility in a high pressure GOX environment. It is known that in addition to impact sensitivity of materials, approximately adiabatic compression conditions can contrive to induce materials reactivity. Test runs at high pressure using the ABMA tester indicate the following: (1) The materials used in the tests showed an inverse relationship between thickness and impact sensitivity. (2) Several materials tested exhibited greater impact sensitivity in GOX than in LOX. (3) The impact sensitivity of the materials tested in GOX, at the pressures tested, showed enhanced impact sensitivity with higher pressure. (4) The rank ordering of the materials tested in LOX up to 1000 psia is the same as the rank ordering resulting from tests in LOX at 14.7 psia.

Obsessive-compulsive tendencies are associated with a focused information processing strategy.

PubMed

Soref, Assaf; Dar, Reuven; Argov, Galit; Meiran, Nachshon

2008-12-01

The study examined the hypothesis that obsessive-compulsive (OC) tendencies are related to a reliance on focused and serial rather than a parallel, speed-oriented information processing style. Ten students with high OC tendencies and 10 students with low OC tendencies performed the flanker task, in which they were required to quickly classify a briefly presented target letter (S or H) that was flanked by compatible (e.g., SSSSS) or incompatible (e.g., HHSHH) noise letters. Participants received 4 blocks of 100 trials each, two with 50% compatible trials and two with 80% compatible trials and were informed of the probability of compatible trials before the beginning of each block. As predicted, high OC participants, as compared to low OC participants, had slower overall reaction time (RT) and lower tendency for parallel processing (defined as incompatible trials RT minus compatible trials RT). Low, more than high OC participants tended to adjust their focused/parallel processing including a shift towards parallel processing in blocks with 80% compatible trials and in trials following compatible trials. Implications of these results to the cognitive theory and therapy of OCD are discussed.

Unstable identity compatibility: how gender rejection sensitivity undermines the success of women in science, technology, engineering, and mathematics fields.

PubMed

Ahlqvist, Sheana; London, Bonita; Rosenthal, Lisa

2013-09-01

Although the perceived compatibility between one's gender and science, technology, engineering, and mathematics (STEM) identities (gender-STEM compatibility) has been linked to women's success in STEM fields, no work to date has examined how the stability of identity over time contributes to subjective and objective STEM success. In the present study, 146 undergraduate female STEM majors rated their gender-STEM compatibility weekly during their freshman spring semester. STEM women higher in gender rejection sensitivity, or gender RS, a social-cognitive measure assessing the tendency to perceive social-identity threat, experienced larger fluctuations in gender-STEM compatibility across their second semester of college. Fluctuations in compatibility predicted impaired outcomes the following school year, including lower STEM engagement and lower academic performance in STEM (but not non-STEM) classes, and significantly mediated the relationship between gender RS and STEM engagement and achievement in the 2nd year of college. The week-to-week changes in gender-STEM compatibility occurred in response to negative academic (but not social) experiences.

The use of the bicycle compatibility index in identifying gaps and deficiencies in bicycle networks

NASA Astrophysics Data System (ADS)

Ilie, A.; Oprea, C.; Costescu, D.; Roşca, E.; Dinu, O.; Ghionea, F.

2016-11-01

Currently, no methodology is widely accepted by engineers, planners, or bicycle coordinators that allow them to determine how compatible a roadway is in providing efficient operation of both bicycles and motor vehicles. Previous studies reported a number of approaches to obtain an appropriate level of service; some authors developed the bicycle level of service (BLOS) and other authors developed the bicycle compatibility indexes (BCI). The level of service (BLOS) for a bicycle route represents an evaluation of safety and commodity perceived by a bicyclist reported to the motorized traffic, while running on the road surface. The bicycle compatibility index (BCI) is used by bicycle coordinators, transportation planners, traffic engineers to evaluate the capability of specific roadways to accommodate both motorists and bicyclists and to plan for and design roadways that are bicycle compatible. After applying BCI and BLOS models for the designed bicycle infrastructure network in the city of Dej, one can see that only few streets are Moderately Low compatible compared to the others with a high degree of compatibility that recommends to include them in the bicycle infrastructure network.

Facial and semantic emotional interference: A pilot study on the behavioral and cortical responses to the dual valence association task

PubMed Central

2011-01-01

Background Integration of compatible or incompatible emotional valence and semantic information is an essential aspect of complex social interactions. A modified version of the Implicit Association Test (IAT) called Dual Valence Association Task (DVAT) was designed in order to measure conflict resolution processing from compatibility/incompatibly of semantic and facial valence. The DVAT involves two emotional valence evaluative tasks which elicits two forms of emotional compatible/incompatible associations (facial and semantic). Methods Behavioural measures and Event Related Potentials were recorded while participants performed the DVAT. Results Behavioural data showed a robust effect that distinguished compatible/incompatible tasks. The effects of valence and contextual association (between facial and semantic stimuli) showed early discrimination in N170 of faces. The LPP component was modulated by the compatibility of the DVAT. Conclusions Results suggest that DVAT is a robust paradigm for studying the emotional interference effect in the processing of simultaneous information from semantic and facial stimuli. PMID:21489277

Methodological approach towards the definition of new storage conditions for inert wastes.

PubMed

Perrodin, Y; Méhu, J; Grelier-Volatier, L; Charbonnierb, P; Baranger, P; Thoraval, L

2002-01-01

In 1997, the French Ministry of Environment launched studies aiming to define a specific regulation concerning inert waste disposal in order to limit potential impact of such facilities on the environment by fixing minimum requirements. A model (chemical model/hydrodynamic model) was developed to determine dumping conditions. This model was then applied on two defined scenarios (landfill surface, effective rainfalls...) in order to study the sulphate concentrations in aquifer system immediately downstream from the storage facility. Results allow us to determine in which conditions the sulphates concentrations are compatibles with the potentially drinkable character of the groundwater. They more specifically concern the nature of the waste disposed of, the efficient rainfalls and the landfill area.

Aircrew laser eye protection: visual consequences and mission performance.

PubMed

Thomas, S R

1994-05-01

Battlefield laser proliferation poses a mounting risk to aircrew and ground personnel. Laser eye protection (LEP) based on current mature, mass-producible technologies absorbs visible light and can impact visual performance and color identification. These visual consequences account for many of the mission incompatibilities associated with LEP. Laboratory experiments and field investigations that examined the effects of LEP on visual performance and mission compatibility are reviewed. Laboratory experiments assessed the ability of subjects to correctly read and identify the color of head-down display symbology and tactical pilotage charts (TPC's) with three prototype LEP visors. Field investigations included Weapons Systems Trainer (WST), ground, and flight tests of the LEP visors. Recommendations for modifying aviation lighting systems to improve LEP compatibility are proposed. Issues concerning flight safety when using LEP during air operation are discussed.

Basic Guidelines for Brain-Compatible Classrooms: Theory to Praxis.

ERIC Educational Resources Information Center

Liston, Delores D.

This paper reviews recent findings in the field of neuroscience that may have a direct impact on specific methodologies and practices in education. It focuses on five concepts from neuroscience: (1) the mind-brain processes symbolic information; (2) neurons are imbued with an epistemic hunger and the mind-brain with a cognitive imperative to learn…

Impact of temperature stress and validamycin A on compatible solutes and fumonisin production in F. verticillioides: Role of trehalose-6-phosphate synthase

USDA-ARS?s Scientific Manuscript database

Fusarium verticillioides is a pathogen of maize that causes root, stalk, and ear rot and produces fumonisins, toxic secondary metabolites associated with disease in livestock and humans. Environmental stresses such as heat and drought influence disease severity and toxin production, but the effects ...

Program VSMOKE--Users Manual

Treesearch

Leonidas G. Lavdas

1996-01-01

This is a users manual for VSMOKE, a computer porgram for predicting the smoke and dry weather visibility impact of a singel prescvribed fire at several downwind locations. VSMOKE is a FORTRAN 77 program that depends on the input in file VSMOKE.IPT to generate output in file compatible with those used by the U.S. Environmental Protection Agency. VSMOKE is uniquely...

Can microscale meteorological conditions predict the impact of white pine blister rust in Colorado and Wyoming?

Treesearch

William R. Jacobi; Betsy A. Goodrich; Holly S. J. Kearns; Kelly S. Burns; Brian W. Geils

2011-01-01

White pine blister rust occurs when there are compatible interactions between susceptible hosts (white pines and Ribes spp.), inoculum (Cronartium ribicola spores), and local weather conditions during infection. The five spore stages of the white pine blister rust (WPBR) fungus have specific temperature and moisture conditions necessary for production, germination, and...

Seakeeping considerations in the employment of V/STOL on Naval ships

NASA Technical Reports Server (NTRS)

Olson, S. R.

1977-01-01

Compatibility of Naval ships as V/STOL support platforms and the ship motions that V/STOL aircraft must endure are discussed. A methodology which evaluates the impact of motion criteria such as the maximum ship motion allowable during V/STOL landing/launch is presented. Emphasis is given to design alternatives that reduce ship motion.

75 FR 20826 - Notice of Intent To Prepare a Draft Environmental Impact Statement on Beach and Dune Restoration...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-21

... restore the beach and dune by placing approximately 610,000 cubic yards of beach compatible sand along the proposed project's beach. The sand will be hopper-dredged from a relict shoal approximately three to six... analyze the following: aesthetics/visual quality, agricultural resources, air quality, biological...

Dialectical Behavioral Therapy and EMDR for Adolescents in Residential Treatment: A Practical and Theoretical Perspective

ERIC Educational Resources Information Center

Lovelle, Carole

2005-01-01

DBT and EMDR as primary treatment methods provide effective treatment for adolescents in the setting of group residential facilities. Regardless of the intensity of the pathology or the length of stay, these compatible treatment methods provide adolescents with significant decreases in the impact of traumatic memories and increased emotional…

The role of human-at-work systems in business sustainability: perspectives based on expert and qualified production workers in a manufacturing enterprise.

PubMed

Genaidy, Ash M; Rinder, Maria M; Sequeira, Reynold; A-Rehim, Amal

2010-04-01

A community of highly qualified employees is desirable for the workforce to become a competitive business advantage, improving and sustaining corporate health. Currently, the scientific literature is limited on information comparing the assessment of expert and qualified workers for the employee-work environment interface. Such information would be valuable for industrial managers to obtain and act on the different perspectives of its workers for business improvement and survivability. A primary objective of this study is to explore the perspectives of expert and qualified workers on the quality of the employee-work environment interface in a manufacturing enterprise. This investigation was performed in a production department in a small manufacturing enterprise. Two expert workers participated in the study, with each being in the company for 30 years and having performed all jobs in the production department as well as supervisory and line management responsibilities. A total of 13 qualified workers from day and night shifts were used in the study, with the great majority of workers possessing 10 or more years of on-the-job experience but not acquiring the same specialised knowledge required for operating the technological resources in the department. The work compatibility methodology was used to assess the quality of employee-work environment interface for both expert and qualified workers. Both expert and qualified workers provided similar trends in terms of their compatibility assessment of experienced and acting work domains. In general, the compatibility levels for the day shift were poorer than those obtained for the night shift for acting work domains. The similarities in assessment between the expert and qualified workers were much closer for factors impacting job performance at the task and immediate surrounding levels (i.e. physical and mental task content, physical environment). There were greater differences at the macro level, that is, at the process and enterprise levels, in terms of organisational/social/technological environment. This is particularly noted for the organisational environment. The compatibility values obtained for the experienced domains mirror those obtained for acting domains. The overall workload was assessed as requiring major redesign during the day shift and needing added responsibilities for the night shift according to both expert and qualified workers. The assessment of qualified workers is comparable with that of expert workers for the job content and immediate surroundings. Differences are more observed for process- and enterprise-based factors; thereby, providing company management different perspectives in order to devise organisational strategies conducive for optimum human and corporate health and pointing to the probable interactions of the different systems impacting individual and enterprise performance. STATEMENT OF RELEVANCE: This research examines similarities and differences between qualified and expert workers in their assessment of the worker-work environment interface. The contribution to improved understanding of the complex interactions of human-at-work and enterprise systems should be beneficial to organisations in their quest to remain competitive in a global economy.

Detritus in K/T boundary clays of western North America - Evidence against a single oceanic impact

NASA Technical Reports Server (NTRS)

Sharpton, V. L.; Schuraytz, B. C.; Burke, K.; Murali, A. V.; Ryder, G.

1990-01-01

Understanding the crustal signature of impact ejecta contained in the Cretaceous/Tertiary (K/T) boundary layer is crucial to constraining the possible site(s) of the postulated K/T impact event. The relatively unaltered clastic constituents of the boundary layer at widely separated outcrops within the western interior of North America are not compatible with a single oceanic impact but require instead an impact site on a continent or continental margin. On the other hand, chemical compositions of highly altered K/T boundary layer components in some marine sections have suggested to others an impact into oceanic crust. We suspect that post-depositional alteration within the marine setting accounts for this apparent oceanic affinity. If, however, this is not the case, multiple simultaneous impacts, striking continent as well as ocean floor, would seem to be required.

An economic assessment of STOL aircraft potential including terminal area environmental considerations, volume 1

NASA Technical Reports Server (NTRS)

Solomon, H. L.; Sokolsky, S.

1974-01-01

The results of an economic and environmental study of short haul airline systems using short takeoff and landing (STOL) aircraft are presented. The STOL system characteristics were optimized for maximum patronage at a specified return on investment, while maintaining noise impact compatibility with the terminal area. Supporting studies of aircraft air pollution and hub airport congestion relief were also performed. The STOL concept specified for this study was an Augmentor Wing turbofan aircraft having a field length capability of 2,000 ft. and an effective perceived noise level of 95 EPNdB at 500 ft. sideline distance. An economic and environmental assessment of the defined STOL system and a summary of the methodology, STOL system characteristics and arena characteristics are provided.

Cooler biologically compatible core body temperatures may prolong longevity and combat neurodegenerative disorders.

PubMed

Salerian, Alen J; Saleri, Nansen G

2006-01-01

Scientific evidence suggests the critical role of temperature in regulating three mechanisms contributing to cellular damage: Oxidative stress, oxygen demand overload and inflammation. In this article, we propose that the Arrhenius rate law has a profound impact on aging and a variety of neurodegenerative disorders including Alzheimer's disease, and we review the supporting evidence. Published studies suggest empirical correlations between temperature and lifespan of various organisms, bolstering the hypothesis that variations in lifespan may stem from differences in the mitochondrial production rates of radicals - a process also influenced by temperature. Given the exponential temperature dependency of all biochemical factors, cooler body temperatures may promote longevity and combat neurodegenerative disorders. This promises to offer extraordinary yet unexplored weapons against two formidable enemies of the human body: aging and neurodegenerative disorders. Stated in the form of a thesis referred to as Salerian and Saleri Temperature Thesis (SSTT): "Cooler biologically compatible core body temperatures prolong lifespan and are of value to combat illness". Double blind studies of SSTT in therapeutic strategies against amyotrophic lateral sclerosis (ALS) or early-stage Alzheimer's disease may offer a reasonable first stage to validate SSTT. In view of the known rapid progressive neurodegeneration associated with ALS, minute variations in core body temperature may, in fact, demonstrate statistically significant differences in disease progression.

Climate change and dengue: a critical and systematic review of quantitative modelling approaches

PubMed Central

2014-01-01

Background Many studies have found associations between climatic conditions and dengue transmission. However, there is a debate about the future impacts of climate change on dengue transmission. This paper reviewed epidemiological evidence on the relationship between climate and dengue with a focus on quantitative methods for assessing the potential impacts of climate change on global dengue transmission. Methods A literature search was conducted in October 2012, using the electronic databases PubMed, Scopus, ScienceDirect, ProQuest, and Web of Science. The search focused on peer-reviewed journal articles published in English from January 1991 through October 2012. Results Sixteen studies met the inclusion criteria and most studies showed that the transmission of dengue is highly sensitive to climatic conditions, especially temperature, rainfall and relative humidity. Studies on the potential impacts of climate change on dengue indicate increased climatic suitability for transmission and an expansion of the geographic regions at risk during this century. A variety of quantitative modelling approaches were used in the studies. Several key methodological issues and current knowledge gaps were identified through this review. Conclusions It is important to assemble spatio-temporal patterns of dengue transmission compatible with long-term data on climate and other socio-ecological changes and this would advance projections of dengue risks associated with climate change. PMID:24669859

Effects of in-vehicle warning information displays with or without spatial compatibility on driving behaviors and response performance.

PubMed

Liu, Yung-Ching; Jhuang, Jing-Wun

2012-07-01

A driving simulator study was conducted to evaluate the effects of five in-vehicle warning information displays upon drivers' emergent response and decision performance. These displays include visual display, auditory displays with and without spatial compatibility, hybrid displays in both visual and auditory format with and without spatial compatibility. Thirty volunteer drivers were recruited to perform various tasks that involved driving, stimulus-response, divided attention and stress rating. Results show that for displays of single-modality, drivers benefited more when coping with visual display of warning information than auditory display with or without spatial compatibility. However, auditory display with spatial compatibility significantly improved drivers' performance in reacting to the divided attention task and making accurate S-R task decision. Drivers' best performance results were obtained for hybrid display with spatial compatibility. Hybrid displays enabled drivers to respond the fastest and achieve the best accuracy in both S-R and divided attention tasks. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

GenomeLandscaper: Landscape analysis of genome-fingerprints maps assessing chromosome architecture.

PubMed

Ai, Hannan; Ai, Yuncan; Meng, Fanmei

2018-01-18

Assessing correctness of an assembled chromosome architecture is a central challenge. We create a geometric analysis method (called GenomeLandscaper) to conduct landscape analysis of genome-fingerprints maps (GFM), trace large-scale repetitive regions, and assess their impacts on the global architectures of assembled chromosomes. We develop an alignment-free method for phylogenetics analysis. The human Y chromosomes (GRCh.chrY, HuRef.chrY and YH.chrY) are analysed as a proof-of-concept study. We construct a galaxy of genome-fingerprints maps (GGFM) for them, and a landscape compatibility among relatives is observed. But a long sharp straight line on the GGFM breaks such a landscape compatibility, distinguishing GRCh38p1.chrY (and throughout GRCh38p7.chrY) from GRCh37p13.chrY, HuRef.chrY and YH.chrY. We delete a 1.30-Mbp target segment to rescue the landscape compatibility, matching the antecedent GRCh37p13.chrY. We re-locate it into the modelled centromeric and pericentromeric region of GRCh38p10.chrY, matching a gap placeholder of GRCh37p13.chrY. We decompose it into sub-constituents (such as BACs, interspersed repeats, and tandem repeats) and trace their homologues by phylogenetics analysis. We elucidate that most examined tandem repeats are of reasonable quality, but the BAC-sized repeats, 173U1020C (176.46 Kbp) and 5U41068C (205.34 Kbp), are likely over-repeated. These results offer unique insights into the centromeric and pericentromeric regions of the human Y chromosomes.

[Compatibility of Work and Family Life of Employees in the Healthcare Sector: An Issue in Health Services Research].

PubMed

Lukasczik, Matthias; Ahnert, Jutta; Ströbl, Veronika; Vogel, Heiner; Donath, Carolin; Enger, Ilka; Gräßel, Elmar; Heyelmann, Lena; Lux, Heidemarie; Maurer, Jochen; Özbe, Dominik; Spieckenbaum, Stefanie; Voigtländer, Elzbieta; Wildner, Manfred; Zapf, Andreas; Zellner, Angela; Hollederer, Alfons

2017-05-18

Background Healthcare professionals are confronted with specific work-related demands that influence work-family relations and might indirectly affect the quality of healthcare. This paper seeks to provide an overview of the current state of research on this topic of relevance to health services research. The overview may serve as a starting point for modifying structures in the healthcare system (especially in rural regions) with the aim of improving work-family compatibility. Methods A systematic national and international literature search was conducted in terms of a scoping review. The following criteria/contents to be covered in publications were defined: work-family compatibility; work-family interface and work-family conflict in employees working in healthcare; healthcare professions in rural areas and links with work-family issues; interventions to improve work-family compatibility. 145 publications were included in the overview. Results The available literature focuses on physicians and nursing staff while publications on other professions are largely lacking. The methodological quality of existing studies is mostly low, including a lack of meta-analyses. Several studies document dissatisfaction in physicians and nursing staff regarding reconciliation of work and family life. Only few intervention studies were found that seek to improve work-life compatibility; few of them focus on employees in healthcare. There are also deficits with respect to linking work-family issues with aspects of healthcare in rural areas. Conclusions There is a shortage of systematic national and international research regarding work-family compatibility, especially when it comes to the evaluation of interventions. The overview provides starting points for improving work-family compatibility in healthcare. © Georg Thieme Verlag KG Stuttgart · New York.

Investigating the micromorphological differences of the implant-abutment junction and their clinical implications: a pilot study.

PubMed

Mattheos, Nikos; Li, Xiaona; Zampelis, Antonios; Ma, Li; Janda, Martin

2016-11-01

The aim of this pilot study was to investigate the morphological micro-features of three commercially available implant-abutment joints, using compatible and original prosthetic components. Furthermore, possible correlations between the micromorphology and potential functional complications were investigated with the use of finite element analysis. Three abutments (one original and two compatibles) were torqued on original Straumann RN implants, as according to each of the manufacturer's instructions. The implant-abutment units were sliced in the microtome and photographed under different magnifications (10×-500×) through a scanning electron microscope. Finite element analysis models were reconstructed for each of the implant-abutment units using the precise measurements from the SEM. Differences in stress, strain and deformation for the three different abutments were then calculated using ANSYS Workbench v13. Major dimensional differences were identified between all studied contact areas of the three units. The tight contact in the implant shoulder was similar in all three units, but engagement of the internal connection and, in particular, the anti-rotation elements was seriously compromised in the compatible abutments. One compatible abutment demonstrated compromised engagement of the abutment screw as well. Equivalent stress and strain in the FEA were much higher for the compatible abutments. An evaluation of the sequence of preload application revealed differences in the pattern of deformation between the original and compatible abutments, which can have serious clinical implications. Compatible abutments can present critical morphological differences from the original ones. The differences in the cross-sectional geometry result in large differences in the overall contact areas, both in terms of quality and quantity which could have serious implications for the long-term stability of the prosthesis. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Review on Prescription Compatibility of Shaoyao Gancao Decoction and Reflection on Pharmacokinetic Compatibility Mechanism of Traditional Chinese Medicine Prescription Based on In Vivo Drug Interaction of Main Efficacious Components

PubMed Central

Bi, Xiaolin; Gong, Meirong; Di, Liuqing

2014-01-01

Shaoyao Gancao Decoction (SGD) derived from Zhang Zhongjing's “Typhoid Theory” is composed of peony and licorice, having the efficacy of nourishing liver, relaxing spasm, and relieving pain. Modern compatibility studies of SGD on chemistry, pharmacology, and pharmacokinetics all demonstrate the reasonable compatibility of peony and licorice. However, the present research on pharmacokinetics is only descriptive and limited to the influence on in vivo dynamic process of certain ingredients; correspondingly, there is lack of studies on the essence of these efficacious substances' in vivo changes; that is, whether it is because there exists in vivo drug interaction in absorption, distribution, metabolism, and excretion (ADME) of active ingredients that leads to the improvement of bioavailability. We herein take SGD as an example and suggest that it is necessary to study in vivo drug interaction of main efficacious components mediated by metabolic enzymes, transport proteins, or plasma protein binding in the course of ADME, which is helpful to illustrate the principle of pharmacokinetic compatibility from the essence leading to the changes of effective substances in vivo. PMID:25147573

Altruistic unbalanced paired kidney exchange at Columbia University/New York-Presbyterian hospital: rationale and practical considerations.

PubMed

Ratner, Lloyd E; Ratner, Emily R; Kelly, Joan; Carrol, Maureen; Cherwinski, Karyn; Ernst, Victoria; Rana, Abbas

2008-01-01

Paired kidney exchanges are being used with increasing frequency to overcome humoral immunologic incompatibilities between patients in need of renal transplantation and their potential live donors. Altruistic unbalanced exchanges utilize compatible donor/recipient pairs in order to facilitate the transplantation of a patient with an incompatible donor. We have now performed several altruistic unbalanced paired kidney exchanges at our institution. Also, we have surveyed potential donors and recipients regarding their attitudes toward participating in altruistic unbalanced paired kidney exchanges. Patients are most amenable to participation if they perceive a benefit from trading away a compatible donor. Given the number of compatible live donor transplants performed annually, if practiced on a broad scale, altruistic unbalancedpaired kidney exchanges can have a profound impact upon the supply of kidneys for transplantation. These exchanges can be performed at individual centers without the requirement for largesharing pools or complex computer algorithms. However, there are a number of ethical and logistical considerations that must be addressed. Altruistic unbalanced paired kidney exchanges represent a major paradigm shift in renal transplantation, in that a private resource (i.e. the live kidney donor) is converted to a shared or public one.

Study on Influencing Factors of Carbon Emissions from Energy Consumption of Shandong Province of China from 1995 to 2012

PubMed Central

Song, Jiekun; Song, Qing; Zhang, Dong; Lu, Youyou; Luan, Long

2014-01-01

Carbon emissions from energy consumption of Shandong province from 1995 to 2012 are calculated. Three zero-residual decomposition models (LMDI, MRCI and Shapley value models) are introduced for decomposing carbon emissions. Based on the results, Kendall coordination coefficient method is employed for testing their compatibility, and an optimal weighted combination decomposition model is constructed for improving the objectivity of decomposition. STIRPAT model is applied to evaluate the impact of each factor on carbon emissions. The results show that, using 1995 as the base year, the cumulative effects of population, per capita GDP, energy consumption intensity, and energy consumption structure of Shandong province in 2012 are positive, while the cumulative effect of industrial structure is negative. Per capita GDP is the largest driver of the increasing carbon emissions and has a great impact on carbon emissions; energy consumption intensity is a weak driver and has certain impact on carbon emissions; population plays a weak driving role, but it has the most significant impact on carbon emissions; energy consumption structure is a weak driver of the increasing carbon emissions and has a weak impact on carbon emissions; industrial structure has played a weak inhibitory role, and its impact on carbon emissions is great. PMID:24977216

Music and the brain - design of an MEG compatible piano.

PubMed

Chacon-Castano, Julian; Rathbone, Daniel R; Hoffman, Rachel; Heng Yang; Pantazis, Dimitrios; Yang, Jason; Hornberger, Erik; Hanumara, Nevan C

2017-07-01

Magnetoencephalography (MEG) neuroimaging has been used to study subjects' responses when listening to music, but research into the effects of playing music has been limited by the lack of MEG compatible instruments that can operate in a magnetically shielded environment without creating electromagnetic interference. This paper describes the design and preliminary testing of an MEG compatible piano keyboard with 25 full size keys that employs a novel 3-state optical encoder design and electronics to provide realistic velocity-controlled volume modulation. This instrument will allow researchers to study musical performance on a finer timescale than fMRI and enable a range of MEG studies.

Oxygen Compatibility of Brass-Filled PTFE Compared to Commonly Used Fluorinated Polymers for Oxygen Systems

NASA Technical Reports Server (NTRS)

Herald, Stephen D.; Frisby, Paul M.; Davis, Samuel Eddie

2009-01-01

Safe and reliable seal materials for high-pressure oxygen systems sometimes appear to be extinct species when sought out by oxygen systems designers. Materials that seal well are easy to find, but these materials are typically incompatible with oxygen, especially in cryogenic liquid form. This incompatibility can result in seals that leak, or much worse, seals that easily ignite and burn during use. Materials that are compatible with oxygen are easy to find, such as the long list of compatible metals, but these metallic materials are limiting as seal materials. A material that seals well and is oxygen compatible has been the big game in the designer's safari. Scientists at the Materials Combustion Research Facility (MCRF), part of NASA/Marshall Space Flight Center (MSFC), are constantly searching for better materials and processes to improve the safety of oxygen systems. One focus of this effort is improving the characteristics of polymers used in the presence of an oxygen enriched environment. Very few systems can be built which contain no polymeric materials; therefore, materials which have good impact resistance, low heat of combustion, high auto-ignition temperature and that maintain good mechanical properties are essential. The scientists and engineers at the Materials Combustion Research Facility, in cooperation with seal suppliers, are currently testing a new formulation of polytetrafluoroethylene (PTFE) with Brass filler. This Brass-filled PTFE is showing great promise as a seal and seat material for high pressure oxygen systems. Early research has demonstrated very encouraging results, which could rank this material as one of the best fluorinated polymers ever tested. This paper will compare the data obtained for Brass-filled PTFE with other fluorinated polymers, such as TFE-Teflon (PTFE) , Kel-F 81, Viton A, Viton A-500, Fluorel , and Algoflon . A similar metal filled fluorinated polymer, Salox-M , was tested in comparison to Brass-filled PTFE to demonstrate the importance of the metal chosen and relative percentage of filler. General conclusions on the oxygen compatibility of this formulation are drawn, with an emphasis on comparing and contrasting the materials performance to the performance of the current state-of-the-art oxygen compatible polymers.

National Tests and Education Reform: Are They Compatible? William H. Angoff Memorial Lecture Series.

ERIC Educational Resources Information Center

Jones, Lyle V.

The President and the Department of Education have advocated national testing, but they have not really justified their use. Most educators argue for the importance of multiple assessments, rather than a single test of achievement with great impact on the future of a student and an educational system. Misuses of test results would plague national…

Values and the Future: The Impact of Technological Change on American Values.

ERIC Educational Resources Information Center

Baier, Kurt, Ed; Rescher, Nicholas, Ed.

This collection of essays aims to draw attention to important areas of interaction between technology and values, to offer some ideas of where and how control of social problems may be attempted in ways which are compatible with the dominant values of the persons affected, and to map out a framework of categories within which one can describe and…

Thermodynamic Analysis of Compatibility of Several Reinforcement Materials with Beta Phase NiAl Alloys

NASA Technical Reports Server (NTRS)

Misra, Ajay K.

1988-01-01

Chemical compatibility of several reinforcement materials with beta phase NiAl alloys within the concentration range 40 to 50 at. percent Al have been analyzed from thermodynamic considerations at 1373 and 1573 K. The reinforcement materials considered in this study include carbides, borides, oxides, nitrides, beryllides, and silicides. Thermodynamic data for NiAl alloys have been reviewed and activity of Ni and Al in the beta phase have been derived at 1373 and 1573 K. Criteria for chemical compatibility between the reinforcement material and the matrix have been defined and several chemically compatible reinforcement materials have been defined.

Technology issues for high-speed civil transports

NASA Technical Reports Server (NTRS)

Dollyhigh, Samuel M.

1989-01-01

Current efforts to prepare the technology for a new generation of high-speed civil transports are focused primarily on environmental issues. This paper reports on studies to provide: (1) acceptable engine emissions; (2) reduced airport/community noise; and (3) sonic-boom minimization. Attention is also given to technologies that allow a lighter, more efficient vehicle and to other high-payoff technologies, such as supersonic laminar flow; these have the potential for yielding not only better mission performance but also enhanced environmental compatibility for these new vehicles. The technology issues are reviewed in terms of the technologies themselves and their impact on the equally crucial need for economic success.

Pollen Acceptance or Rejection: A Tale of Two Pathways.

PubMed

Doucet, Jennifer; Lee, Hyun Kyung; Goring, Daphne R

2016-12-01

While the molecular and cellular basis of self-incompatibility leading to self-pollen rejection in the Brassicaceae has been extensively studied, relatively little attention has been paid to compatible pollen recognition and the corresponding cellular responses in the stigmatic papillae. This is now changing because research has started to uncover steps in the Brassicaceae 'basal compatible pollen response pathway' in the stigma leading to pollen hydration and germination. Furthermore, recent studies suggest that self-incompatible pollen activates both the basal compatible pathway and the self-incompatibility pathway in the stigma, with the self-incompatibility response ultimately prevailing to reject self-pollen. We review here recent discoveries in both pathways and discuss how compatible pollen is accepted by the stigma versus the rejection of self-incompatible pollen. Copyright © 2016 Elsevier Ltd. All rights reserved.

Comparative serological investigation between cat and tiger blood for transfusion

PubMed Central

THENGCHAISRI, Naris; SINTHUSINGHA, Chayakrit; ARTHITWONG, Surapong; SATTASATHUCHANA, Panpicha

2017-01-01

Evidence suggests that non-domesticated felids inherited the same AB-erythrocyte antigens as domestic cats. To study the possible compatibility of tiger blood with that of other endangered felidae, blood samples from captive tigers and domestic cats were subjected to an in vitro study. The objectives of this study were to (1) identify whether the captive tigers had blood type AB and (2) determine the compatibility between the blood of captive tigers and that of domestic cats with a similar blood type. The anti-coagulated blood with ethylenediaminetetraacetic acid of 30 tigers was examined to determine blood type, and a crossmatching test was performed between tiger and cat blood. All 30 tigers had blood type A. Tube agglutination tests using tiger plasma with cat erythrocytes resulted in 100% agglutination (n=30) with type B cat erythrocytes and 76.7% agglutination (n=23) with type A cat erythrocytes. The 80% of major and 60% of minor compatibilities between blood from 10 tigers and 10 domestic cats with blood type A were found to pass compatibility tests. Interestingly, 3/10 of the tigers’ red blood cell samples were fully compatible with all cat plasmas, and 1/10 of the tiger plasma samples were fully compatible with the type A red cells of domestic cats. Although the result of present findings revealed type-A blood group in the surveyed tigers, the reaction of tiger plasma with Type-A red cell from cats suggested a possibility of other blood type in tigers. PMID:28450662

Comparative serological investigation between cat and tiger blood for transfusion.

PubMed

Thengchaisri, Naris; Sinthusingha, Chayakrit; Arthitwong, Surapong; Sattasathuchana, Panpicha

2017-06-29

Evidence suggests that non-domesticated felids inherited the same AB-erythrocyte antigens as domestic cats. To study the possible compatibility of tiger blood with that of other endangered felidae, blood samples from captive tigers and domestic cats were subjected to an in vitro study. The objectives of this study were to (1) identify whether the captive tigers had blood type AB and (2) determine the compatibility between the blood of captive tigers and that of domestic cats with a similar blood type. The anti-coagulated blood with ethylenediaminetetraacetic acid of 30 tigers was examined to determine blood type, and a crossmatching test was performed between tiger and cat blood. All 30 tigers had blood type A. Tube agglutination tests using tiger plasma with cat erythrocytes resulted in 100% agglutination (n=30) with type B cat erythrocytes and 76.7% agglutination (n=23) with type A cat erythrocytes. The 80% of major and 60% of minor compatibilities between blood from 10 tigers and 10 domestic cats with blood type A were found to pass compatibility tests. Interestingly, 3/10 of the tigers' red blood cell samples were fully compatible with all cat plasmas, and 1/10 of the tiger plasma samples were fully compatible with the type A red cells of domestic cats. Although the result of present findings revealed type-A blood group in the surveyed tigers, the reaction of tiger plasma with Type-A red cell from cats suggested a possibility of other blood type in tigers.

The Influence of Aconitum carmichaelii Debx. on the Pharmacokinetic Characteristics of Main Components in Rheum palmatum L.

PubMed

Li, Yun-xia; Gong, Xiao-hong; Li, Yan; Zhang, Ruo-qi; Yuan, An; Zhao, Meng-jie; Zeng, Dai-wen; Peng, Cheng

2015-08-01

Rhei Radix et Rhizoma was one of the commonly used traditional Chinese medicines, and the compatibility of Rhei Radix et Rhizoma and Aconiti Lateralis Radix Praeparata was the basic herb pair applied in many Chinese traditional prescription. Rhubarb anthraquinones were the main bioactive materials of Rhei Radix et Rhizoma. To elucidate the compatibility of Rhei Radix et Rhizoma and Aconiti Lateralis Radix Praeparata, the pharmacokinetics of rhubarb anthraquinones as the main marker constituents were investigated. In the present study, pharmacokinetic differences of rhubarb anthraquinones were detected after oral administration of extract of Rheum palmatum L. and compatibility with Aconitum carmichaelii Debx. After oral administration, no difference of peak time can be found for anthraquinones between rhubarb group and compatibility group. But Cmax and area under the curve of aloe-emodin, emodin and chrysophanol in compatibility group were significantly higher than that in rhubarb group. Although the Cmax of rhein in compatibility group was much lower than that in rhubarb group, the area under the curve value was similar in two groups. The clearance and t1/2 of rhubarb anthraquinone were also changed after compatibility. The change of pharmacokinetics characteristics of rhubarb anthraquinone after compatibility may be caused by the drug-drug interaction medicated by chemical reaction and cytochromes P450. Copyright © 2015 John Wiley & Sons, Ltd.

Final environmental impact statement. Waste Isolation Pilot Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-10-01

This volume contains the appendices for the Final Environmental Impact Statement for the Waste Isolation Pilot Plant (WIPP). Alternative geologic environs are considered. Salt, crystalline rock, argillaceous rock, and tuff are discussed. Studies on alternate geologic regions for the siting of WIPP are reviewed. President Carter's message to Congress on the management of radioactive wastes and the findings and recommendations of the interagency review group on nuclear waste management are included. Selection criteria for the WIPP site including geologic, hydrologic, tectonic, physicochemical compatability, and socio-economic factors are presented. A description of the waste types and the waste processing procedures aremore » given. Methods used to calculate radiation doses from radionuclide releases during operation are presented. A complete description of the Los Medanos site, including archaeological and historic aspects is included. Environmental monitoring programs and long-term safety analysis program are described. (DMC)« less

Impacts of climate change on the hydrological cycle over France and associated uncertainties

NASA Astrophysics Data System (ADS)

Dayon, Gildas; Boé, Julien; Martin, Éric; Gailhard, Joël

2018-05-01

This study deals with the evolution of the hydrological cycle over France during the 21st century. A large multi-member, multi-scenario, and multi-model ensemble of climate projections is downscaled with a new statistical method to drive a physically-based hydrological model with recent improvements. For a business-as-usual scenario, annual precipitation changes generally remain small, except over southern France, where decreases close to 20% are projected. Annual streamflows roughly decrease by 10% (±20%) on the Seine, by 20% (±20%) on the Loire, by 20% (±15%) on the Rhone and by 40% (±15%) on the Garonne. Attenuation measures, as implied by the other scenarios analyzed, lead to less severe changes. However, even with a scenario generally compatible with a limitation of global warming to two degrees, some notable impacts may still occur, with for example a decrease in summer river flows close to 25% for the Garonne.

Impact of Upheaval Dome, Utah

NASA Technical Reports Server (NTRS)

Shoemaker, E. M.; Herkenhoff, K. E.

1984-01-01

Reexamination of Upheaval Dome in the Canyonlands National Park, Utah, shows that the structure of this remarkable feature conforms with that expected for a deeply eroded astrobleme. The structure is definitely not compatible with an origin due simply to plastic flowage of salt and other rocks in the underlying Paradox Formation. The most strongly deformed rocks are bounded by a series of circumferential listric faults. The convergent displacement of the rocks corresponds to the deformation that results from collapse of a transient cavity produced by high speed impact. From considerations of the probable depth of exposure of the impact structure and upward extrapolation of the listric faults, the final collapsed crater is estimated to be about 8 to 10 km in diameter; the impacting body was on the order of 0.5 km in diameter.

Gender Compatibility, Math-Gender Stereotypes, and Self-Concepts in Math and Physics

ERIC Educational Resources Information Center

Koul, Ravinder; Lerdpornkulrat, Thanita; Poondej, Chanut

2016-01-01

Positive self-assessment of ability in the quantitative domains is considered critical for student participation in science, technology, engineering, and mathematics field studies. The present study investigated associations of gender compatibility (gender typicality and contentedness) and math-gender stereotypes with self-concepts in math and…

School staff, parent and student perceptions of a Breakfast in the Classroom model during initial implementation.

PubMed

Folta, Sara C; Carmichael Djang, Holly; Halmo, Megan; Metayer, Nesly; Blondin, Stacy A; Smith, Kathleen S; Economos, Christina D

2016-06-01

To understand perspectives of stakeholders during initial district-wide implementation of a Breakfast in the Classroom (BIC) model of the School Breakfast Program. Qualitative data were collected from twenty-nine focus groups and twenty interviews with stakeholders in a school district early in the process of implementing a BIC model of the School Breakfast Program. Ten elementary schools within a large, urban school district in the USA that served predominantly low-income, racial/ethnic minority students. Purposively selected stakeholders in elementary schools that had implemented BIC for 3-6 months: students (n 85), parents/guardians (n 86), classroom teachers (n 44), cafeteria managers (n 10) and principals (n 10). Four primary themes emerged, which were interpreted based on the Diffusion of Innovations model. School staff had changed their perceptions of both the relative disadvantages and costs related to time and effort of BIC over time; the majority of each stakeholder group expressed an appreciation for BIC; student breakfast consumption varied from day to day, related to compatibility of foods with child preferences; and stakeholders held mixed and various impressions of BIC's potential impacts. The study underscores the importance of engaging school staff and parents in discussions of BIC programming prior to its initiation to pre-emptively address concerns related to cost, relative disadvantages and compatibility with child preferences and school routines/workflow. Effectively communicating with stakeholders about positive impacts and nutritional value of the meals may improve support for BIC. These findings provide new information to policy makers, districts and practitioners that can be used to improve implementation efforts, model delivery and outcomes.

Compatibility analysis of material and energy recovery in a regional solid waste management system.

PubMed

Chang, Ying-Hsi; Chang, Ni-Bin

2003-01-01

The rising prices of raw materials and concerns about energy conservation have resulted in an increasing interest in the simultaneous recovery of materials and energy from waste streams. Compatibility exists for several economic, environmental, and managerial reasons. Installing an on-site or off-site presorting facility before an incinerator could be a feasible alternative to achieve both goals if household recycling programs cannot succeed in local communities. However, the regional impacts of presorting solid waste on a waste-to-energy facility remain unclear because of the inherent complexity of solid waste compositions and properties over different areas. This paper applies a system-based approach to assess the impact of installing a refuse-derived fuel (RDF) process before an incinerator. Such an RDF process, consisting of standard unit operations of shredding, magnetic separation, trommel screening, and air classification, might be useful for integrating the recycling and presorting efforts for a large-scale municipal incinerator from a regional sense. An optimization modeling analysis is performed to characterize such integration potential so that the optimal size of the RDF process and associated shipping patterns for flow control can be foreseen. It aims at exploring how the waste inflows with different rates of generation, physical and chemical compositions, and heating values collected from differing administrative districts can be processed by either a centralized presorting facility or an incinerator to meet both the energy recovery and throughput requirements. A case study conducted in Taipei County, which is one of the most densely populated metropolitan areas in Taiwan, further confirms the application potential of such a cost-benefit analysis.

How green are environmental technologies? A new approach for a global evaluation: the case of WWTP effluents ozonation.

PubMed

Papa, M; Pedrazzani, R; Bertanza, G

2013-07-01

The research on the impact of chemical pollution is now increasingly attracted by the topic of organic micropollutants: as secondary biological treatment of wastewater does not provide the complete elimination of these substances, an advanced treatment downstream the biological process can be implemented. Notwithstanding, the benefits of improved effluent quality can be weakened by the negative effects on air quality, when energy consumption and related pollutants emissions deriving from the advanced treatment technologies are taken into account. It is the aim of this work to present an innovative methodology to judge the environmental compatibility of wastewater treatment processes on the basis of the damage on human health produced/avoided, expressed as an economic value. In particular, while for air pollution the established external costs were applied, for water pollution the rates of the impacts on human health have been evaluated in terms of Global Burden of Disease and measured in units of DALY (Disability-Adjusted Life Years), then converted into costs based on Gross Domestic Product. As a first application, this procedure was used for assessing environmental compatibility of a final ozonation: the results of this study showed that the reduction of water pollution achieved by means of ozonation might be beneficial for human health at an extent which is in the same order of magnitude of damage caused by air pollution, emphasizing that the question if the use of advanced (energy-intensive) treatments is a proper solution to remove organic micropollutants from wastewater remains still open. Copyright © 2013 Elsevier Ltd. All rights reserved.

Advanced subsonic long-haul transport terminal area compatibility study. Volume 2: Research and technology recommendations

NASA Technical Reports Server (NTRS)

1974-01-01

The Terminal Area Compatibility (TAC) study is briefly summarized for background information. The most important research items for the areas of noise congestion, and emissions are identified. Other key research areas are also discussed. The 50 recommended research items are categorized by flight phase, technology, and compatibility benefits. The relationship of the TAC recommendations to the previous ATT recommendations is discussed. The bulk of the document contains the 50 recommended research items. For each item, the potential payoff, state of readiness, recommended action and estimated cost and schedule are given.

Studies on in vitro biostability and blood compatibility of polyurethane potting compound based on aromatic polymeric MDI for extracorporeal devices.

PubMed

Hridya, V K; Jayabalan, M

2009-12-01

Polyurethane potting compound based on aromatic isocyanurate of polymeric MDI, poly propylene glycol (PPG400) and trimethylol propane (TMP) has significant favourable properties, good pot life and setting characteristics. The cured potting compound of this formulation has appreciable thermal stability and mechanical properties. In vitro biostability of cured potting compound has been found to be excellent without any significant degradation in simulated physiological media and chemical environment. Studies on blood-material interaction and cytotoxicity reveal in vitro blood compatibility and compatibility with cells of this potting compound.

Design of an MR-compatible fNIRS instrument

NASA Astrophysics Data System (ADS)

Emir, Uzay; Ademoglu, Ahmet; Ozturk, Cengizhan; Aydin, Kubilay; Demiralp, Tamer; Kurt, Adnan; Dincer, Alp; Akin, Ata

2005-04-01

Acquiring functional near infrared spectroscopy (fNIRS) and functional magnetic resonance-imaging (fMRI) data are usually done asynchronously. In order to correlate these two different modalities" data, measurements must be performed at the same time. In this study, we have designed a new MR compatible continuous wave intensity based fNIRS device to overcome this problem. For MR compatible fNIRS, we used two LEDs with wavelengths at 660 and 870 nm. There are four photodiodes for light detection. LEDs operated in a sequential multiplexing mode with adjustable "on" time for each LED. Emitted and diffused light was transferred to and from the tissue through 10 m long single mode plastic optical fibers (INDUSTRIAL FIBER OPTICS, INC.). By using fibers, we overcome MR compatibility problems that can be caused by semi-conductors on probe. This MR compatible fNIRS design can provide synchronous measurements with low cost.

Requirements for the conceptual design of advanced underground coal extraction systems

NASA Technical Reports Server (NTRS)

Gangal, M. D.; Lavin, M. L.

1981-01-01

Conceptual design requirements are presented for underground coal mining systems having substantially improved performance in the areas of production cost and miner safety. Mandatory performance levels are also set for miner health, environmental impact, and coal recovery. In addition to mandatory design goals and constraints, a number of desirable system characteristics are identified which must be assessed in terms of their impact on production cost and their compatibility with other system elements. Although developed for the flat lying, moderately thick seams of Central Appalachia, these requirements are designed to be easily adaptable to other coals.

Spatial compatibility and affordance compatibility in patients with chronic schizophrenia.

PubMed

Kume, Yu; Sato, Fumiyasu; Hiraoka, Yuya; Suzuki, Shingo; Niyama, Yoshitsugu

2016-12-01

A deterioration in information-processing performance is commonly recognized in patients with chronic schizophrenia. Although the enhancement of cognitive skills in patients with schizophrenia is important, the types of external stimuli that influence performance have not received much attention. The aim of present study was to clarify the effects of spatial and affordance compatibility in patients with schizophrenia, compared with those in healthy people. The subjects (25 patients with schizophrenia and 25 healthy controls) participated in two experiment examining the effects of the spatial location of stimuli and the action-relevance of objects. The results showed that the effect of spatial compatibility was similar in both the patients and the controls, whereas the influence of action-relevant objects was not highlighted in either patients with chronic schizophrenia or healthy controls. These findings provide important evidence of a normal spatial compatibility effect in patients with chronic schizophrenia. However, further research examining the affordance compatibility effect is needed, taking into consideration the symptomatology and the severity of the social functioning level in patients with schizophrenia. Copyright © 2016 Elsevier B.V. All rights reserved.

Two-digit number comparison: Decade-unit and unit-decade produce the same compatibility effect with number words.

PubMed

Macizo, Pedro; Herrera, Amparo

2010-03-01

This study explored the processing of 2-digit number words by examining the unit-decade compatibility effect in Spanish. Participants were required to choose the larger of 2-digit number words presented in verbal notation. In compatible trials the decade and unit comparisons led to the same response (e.g., 53-68) while in incompatible trials the decade and unit comparisons led to different responses (e.g., 59-74). Participants were slower on compatible trials as compared to incompatible trials. In Experiments 2 and 3, we evaluated whether the reverse compatibility effect in Spanish was only due to a pure left-to-right encoding which favours the decade processing in this language (decade-unit order). When participants processed 2-digit number words presented in reverse form (in the unit-decade order), the same reverse compatibility effect was found. This pattern of results suggests that participants have learnt a language-dependent process for analysing written numbers which is used irrespective of the specific arrangement of units and decades in the comparison task. 2010 APA, all rights reserved.

Note: Commercial SQUID magnetometer-compatible NMR probe and its application for studying a quantum magnet.

PubMed

Vennemann, T; Jeong, M; Yoon, D; Magrez, A; Berger, H; Yang, L; Živković, I; Babkevich, P; Rønnow, H M

2018-04-01

We present a compact nuclear magnetic resonance (NMR) probe which is compatible with a magnet of a commercial superconducting quantum interference device magnetometer and demonstrate its application to the study of a quantum magnet. We employ trimmer chip capacitors to construct an NMR tank circuit for low temperature measurements. Using a magnetic insulator MoOPO 4 with S = 1/2 (Mo 5+ ) as an example, we show that the T-dependence of the circuit is weak enough to allow the ligand-ion NMR study of magnetic systems. Our 31 P NMR results are compatible with previous bulk susceptibility and neutron scattering experiments and furthermore reveal unconventional spin dynamics.

Note: Commercial SQUID magnetometer-compatible NMR probe and its application for studying a quantum magnet

NASA Astrophysics Data System (ADS)

Vennemann, T.; Jeong, M.; Yoon, D.; Magrez, A.; Berger, H.; Yang, L.; Živković, I.; Babkevich, P.; Rønnow, H. M.

2018-04-01

We present a compact nuclear magnetic resonance (NMR) probe which is compatible with a magnet of a commercial superconducting quantum interference device magnetometer and demonstrate its application to the study of a quantum magnet. We employ trimmer chip capacitors to construct an NMR tank circuit for low temperature measurements. Using a magnetic insulator MoOPO4 with S = 1/2 (Mo5+) as an example, we show that the T-dependence of the circuit is weak enough to allow the ligand-ion NMR study of magnetic systems. Our 31P NMR results are compatible with previous bulk susceptibility and neutron scattering experiments and furthermore reveal unconventional spin dynamics.

Discovery of Hyperpolarized Molecular Imaging Biomarkers in a Novel Prostate Tissue Slice Culture Model

DTIC Science & Technology

2013-06-01

research is to optimize an MRS-compatible, 3D Tissue Culture Bioreactor for use with primary human prostate tissue cultures (TSCs) and use it to...Tissue Culture Bioreactor ” to be submitted to the Journal Magnetic Resonance in Medicine. CONCLUSIONS: We have engineered a robust MR compatible 3D ...loss of structure, function or metabolism within a NMR compatible 3-D tissue culture bioreactor , and that magnetic resonance spectroscopy studies of

Low-frequency dielectric spectroscopy as a tool for studying the compatibility between pharmaceutical gels and mucous tissue.

PubMed

Hägerström, Helene; Edsman, Katarina; Strømme, Maria

2003-09-01

This interdisciplinary work demonstrates how low-frequency dielectric spectroscopy, a technique that is frequently used within physics, can be used to assess the possibilities of intimate surface contact between a polymer gel and mucous tissue, which is generally considered to be the first step in the mucoadhesion process. The dielectric responses of five different gels, of freshly excised porcine nasal mucosa and of systems made by combining the two were measured. All spectra were modeled by a Randles electric circuit containing a diffusion element, a barrier resistance in parallel with a capacitance, and a high-frequency resistance. The results were used to create a measure of the compatibility between the gel and the mucus, which we have named the compatibility factor. Thus, the compatibility factor provides us with a measure of the ease with which a charged species passes the interface between a gel and the mucus layer. The compatibility factor is calculated from the high frequency (kHz region) response of the gel, of the mucosa, and of the combined system. The two highest compatibility factors in this study were obtained for gels based on crosslinked poly(acrylic acid) and chitosan, which was in agreement with the results from mucoadhesion measurements that were performed using a tensile strength method. Copyright 2003 Wiley-Liss, Inc. and the American Pharmacists Association

[Applications of mathematical statistics methods on compatibility researches of traditional Chinese medicines formulae].

PubMed

Mai, Lan-Yin; Li, Yi-Xuan; Chen, Yong; Xie, Zhen; Li, Jie; Zhong, Ming-Yu

2014-05-01

The compatibility of traditional Chinese medicines (TCMs) formulae containing enormous information, is a complex component system. Applications of mathematical statistics methods on the compatibility researches of traditional Chinese medicines formulae have great significance for promoting the modernization of traditional Chinese medicines and improving clinical efficacies and optimizations of formulae. As a tool for quantitative analysis, data inference and exploring inherent rules of substances, the mathematical statistics method can be used to reveal the working mechanisms of the compatibility of traditional Chinese medicines formulae in qualitatively and quantitatively. By reviewing studies based on the applications of mathematical statistics methods, this paper were summarized from perspective of dosages optimization, efficacies and changes of chemical components as well as the rules of incompatibility and contraindication of formulae, will provide the references for further studying and revealing the working mechanisms and the connotations of traditional Chinese medicines.

Bacterial toxicity/compatibility of platinum nanospheres, nanocuboids and nanoflowers

PubMed Central

Gopal, Judy; Hasan, Nazim; Manikandan, M.; Wu, Hui-Fen

2013-01-01

For the first time, we have investigated the bacterial toxicity or compatibility properties of Pt nanoparticles (NPs) with different sizes (P1, P2, P3, P4 and P5). The bacterio-toxic or compatible properties of these five different sized Pt NPs with the clinical pathogen, Pseudomonas aeruginosa were explored by many analytical methods such as the conventional plate count method, matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS), fluorescence microscopy and fluorescence sensoring techniques. The results revealed that the 1–3 nm sized (P1 and P2) Pt NPs showed bacterio-toxic properties while the 4–21 nm (P3, P4 and P5) Pt NPs exhibited bacterio-compatible properties. This is the first study which reports the bacterial toxicity of Pt NPs. The information released from this study is significantly important to future clinical, medical, biological and biomedical applications of Pt NPs. PMID:23405274

Stability and compatibility assessment techniques for total parenteral nutrition admixtures: setting the bar according to pharmacopeial standards.

PubMed

Driscoll, David F

2005-05-01

The stability and compatibility of total parenteral nutrition mixtures compounded for patients requiring nutritional support is paramount to their safety on intravenous infusion. The most significant pharmaceutical issues associated with mixing total parenteral nutrition formulations affecting their safety involve the stability of lipid-injectable emulsions and the compatibility of calcium and phosphate salts. Methods of analysis for stability and compatibility have varied, and the assessments have mostly been largely qualitative. Although pharmacopeial standards have been primarily applicable to pharmaceutical manufacturers, recent efforts by the United States Pharmacopeia have been directed at standardizing pharmacy practices involved in the safe mixing of compounded sterile preparations. The adoption of chapter 797 entitled 'Pharmaceutical compounding - sterile preparations' on 1 January 2004 has had a dramatic impact on pharmacy practice in the United States. More recently, the United States Pharmacopeia has also proposed a new chapter 729 entitled 'Globule size distribution in lipid-injectable emulsions', setting specific limits on the sizes and concentrations of lipid droplets in the formulation, which may have implications for all-in-one mixtures. Finally, new efforts are under way to establish limits on the level of acceptable amounts of particulates intrinsically introduced by the manufacturer, and thus may have ramifications for particulates extrinsically introduced or initiated during compounding by the pharmacist. With careful monitoring and the development of appropriate pharmacopeial-based specifications that limit the size and concentration of large-diameter fat globules and eliminate the possibility of dibasic calcium phosphate precipitates, improved patient outcomes may be achieved.

Understanding the origins of metal-organic framework/polymer compatibility.

PubMed

Semino, R; Moreton, J C; Ramsahye, N A; Cohen, S M; Maurin, G

2018-01-14

The microscopic interfacial structures for a series of metal-organic framework/polymer composites consisting of the Zr-based UiO-66 coupled with different polymers are systematically explored by applying a computational methodology that integrates density functional theory calculations and force field-based molecular dynamics simulations. These predictions are correlated with experimental findings to unravel the structure-compatibility relationship of the MOF/polymer pairs. The relative contributions of the intermolecular MOF/polymer interactions and the flexibility/rigidity of the polymer with respect to the microscopic structure of the interface are rationalized, and their impact on the compatibility of the two components in the resulting composite is discussed. The most compatible pairs among those investigated involve more flexible polymers, i.e. polyvinylidene fluoride (PVDF) and polyethylene glycol (PEG). These polymers exhibit an enhanced contact surface, due to a better adaptation of their configuration to the MOF surface. In these cases, the irregularities at the MOF surface are filled by the polymer, and even some penetration of the terminal groups of the polymer into the pores of the MOF can be observed. As a result, the affinity between the MOF and the polymer is very high; however, the pores of the MOF may be sterically blocked due to the strong MOF/polymer interactions, as evidenced by UiO-66/PEG composites. In contrast, composites involving polymers that exhibit higher rigidity, such as the polymer of intrinsic microporosity-1 (PIM-1) or polystyrene (PS), present interfacial microvoids that contribute to a decrease in the contact surface between the two components, thus reducing the MOF/polymer affinity.

Detection of Vaccinia virus in blood and faeces of experimentally infected cows.

PubMed

Guedes, M I M C; Rehfeld, I S; de Oliveira, T M L; Assis, F L; Matos, A C D; Abrahão, J S; Kroon, E G; Lobato, Z I P

2013-12-01

Bovine vaccinia (BV), a zoonosis caused by Vaccinia virus (VACV), affects dairy cattle and milkers, causing economic, veterinary and human health impacts. Despite such impacts, there are no experimental studies about the pathogenesis of BV in cows to assess whether there is a systemic spread of the virus and whether there are different ways of VACV shedding. Trying to answer some of these questions, a study was proposed using experimental inoculation of VACV in cows. All experimentally infected cows developed lesions compatible with VACV infection in cattle. Two of the six animals presented VACV DNA in blood and faecal samples, starting at the 2nd and the 3rd day post-infection (d.p.i.), respectively, and lasting until the 36th d.p.i., in an intermittent way. This study provides new evidence that VACV can be detected in blood and faeces of infected cows, suggesting that BV could be a systemic disease, and also bringing new information about the epidemiology and pathogenesis of BV. © 2012 Blackwell Verlag GmbH.

Engineering principles to assure compatible docking between future spacecraft of USA and USSR

NASA Technical Reports Server (NTRS)

Johnson, C. C.

1973-01-01

An androgynous peripheral type docking mechanism concept selected by the U.S. and the USSR is described. The rationale supporting the selection of the concept, the mechanical principles inherent to the concept, and the probable nature of future designs stemming from the concept are discussed. Operational situations prior to docking, impact conditions, energy absorption, and structural joining of two spacecraft are examined.

Cyberscience and the Knowledge-Based Economy. Open Access and Trade Publishing: From Contradiction to Compatibility with Non-Exclusive Copyright Licensing

ERIC Educational Resources Information Center

Armbruster, Chris

2008-01-01

Open source, open content and open access are set to fundamentally alter the conditions of knowledge production and distribution. Open source, open content and open access are also the most tangible result of the shift towards e-science and digital networking. Yet, widespread misperceptions exist about the impact of this shift on knowledge…

Ferroelectric memory evaluation and development system

NASA Astrophysics Data System (ADS)

Bondurant, David W.

Attention is given to the Ramtron FEDS-1, an IBM PC/AT compatible single-board 16-b microcomputer with 8-kbyte program/data memory implemented with nonvolatile ferroelectric dynamic RAM. This is the first demonstration of a new type of solid state nonvolatile read/write memory, the ferroelectric RAM (FRAM). It is suggested that this memory technology will have a significant impact on avionics system performance and reliability.

A STUDY OF SMALL GROUP DYNAMICS AND PRODUCTIVITY IN THE BSCS LABORATORY BLOCK PROGRAM.

ERIC Educational Resources Information Center

HURD, PAUL DEHART; ROWE, MARY BUDD

THE RELATIONSHIP BETWEEN SMALL GROUP COMPATIBILITY AND ACHIEVEMENT IN THE BIOLOGICAL SCIENCE CURRICULUM STUDY LABORATORY BLOCK PROGRAM WAS TESTED. STUDENTS IN 14 CLASSES FROM FOUR HIGH SCHOOLS WERE ASSIGNED TO FOUR-MEMBER LABORATORY GROUPS CLASSIFIED AS COMPATIBLE OR INCOMPATIBLE. GROUP CLASSIFICATION WAS VALIDATED BY OBSERVERS WHO WERE NOT AWARE…

Disruption of the Putative Vascular Leak Peptide Sequence in the Stabilized Ricin Vaccine Candidate RTA1-33/44-198

PubMed Central

Janosi, Laszlo; Compton, Jaimee R.; Legler, Patricia M.; Steele, Keith E.; Davis, Jon M.; Matyas, Gary R.; Millard, Charles B.

2013-01-01

Vitetta and colleagues identified and characterized a putative vascular leak peptide (VLP) consensus sequence in recombinant ricin toxin A-chain (RTA) that contributed to dose-limiting human toxicity when RTA was administered intravenously in large quantities during chemotherapy. We disrupted this potentially toxic site within the more stable RTA1-33/44-198 vaccine immunogen and determined the impact of these mutations on protein stability, structure and protective immunogenicity using an experimental intranasal ricin challenge model in BALB/c mice to determine if the mutations were compatible. Single amino acid substitutions at the positions corresponding with RTA D75 (to A, or N) and V76 (to I, or M) had minor effects on the apparent protein melting temperature of RTA1-33/44-198 but all four variants retained greater apparent stability than the parent RTA. Moreover, each VLP(−) variant tested provided protection comparable with that of RTA1-33/44-198 against supralethal intranasal ricin challenge as judged by animal survival and several biomarkers. To understand better how VLP substitutions and mutations near the VLP site impact epitope structure, we introduced a previously described thermal stabilizing disulfide bond (R48C/T77C) along with the D75N or V76I substitutions in RTA1-33/44-198. The D75N mutation was compatible with the adjacent stabilizing R48C/T77C disulfide bond and the Tm was unaffected, whereas the V76I mutation was less compatible with the adjacent disulfide bond involving C77. A crystal structure of the RTA1-33/44-198 R48C/T77C/D75N variant showed that the structural integrity of the immunogen was largely conserved and that a stable immunogen could be produced from E. coli. We conclude that it is feasible to disrupt the VLP site in RTA1-33/44-198 with little or no impact on apparent protein stability or protective efficacy in mice and such variants can be stabilized further by introduction of a disulfide bond. PMID:23364220

Petrographic microscope investigation of mortar and ceramic technologies for the conservation of the built heritage

NASA Astrophysics Data System (ADS)

Pavia, S.; Caro, S.

2007-07-01

Polarised-light (or petrographic) microscopy has been widely applied to heritage materials to assess composition and diagnose damage. However, instead, this paper focuses on the petrographic investigation of brick and mortar technologies for the production of quality repair materials compatible with their adjacent fabrics. Furthermore, the paper relates production technologies to the physical properties of the materials fabricated, and thus their final quality and durability. According to Cesare Brandi´s theory of compatibility (the 20th century architect on whose work modern conservation theory and practice are largely based) existing historic materials should be replaced with their equivalent. This paper demonstrates that polarised-light microscopy provides data on the origin and nature of raw materials, and processing parameters such as blending, mixing, firing, calcination and slaking, and how these relate to the quality of the final product. In addition, this paper highlights the importance of production technologies as these directly impact the physical properties of the materials fabricated and thus determine their final quality and durability. In this context, the paper investigates mortar calcination and slaking, two important operations in the manufacture of building limes that govern the reactivity, shrinkage and water retention of a lime binder which will impact mortar's properties such as workability, plasticity and carbonation speed, and these in turn will determine the ease of execution, durability and strength of a lime mortar. Petrographic analysis also provides evidence of ceramic technology including identification of local or foreign production and processing parameters such as sieving, blending, mixing and firing. A petrographic study of the ceramic matrix coupled to the diagnosis of mineral phases formed during firing allows to quantify sintering and vitrification and thus determine firing temperatures. Finally, certain features of the raw clay such as the grading and the amount and nature of the non-plastic material inform, not only on the raw material's origin, but also impact the physical properties of the ceramic ware.

Composite Overwrapped Pressure Vessels: Database Extension Task 3.0 and Impact Damage Effects Control Task 8.0

NASA Technical Reports Server (NTRS)

Beeson, Harold D.; Davis, Dennis D.; Ross, William L., Sr.; Tapphorn, Ralph M.

2002-01-01

This document represents efforts accomplished at the NASA Johnson Space Center White Sands Test Facility (WSTF) in support of the Enhanced Technology for Composite Overwrapped Pressure Vessels (COPV) Program, a joint research and technology effort among the U.S. Air Force, NASA, and the Aerospace Corporation. WSTF performed testing for several facets of the program. Testing that contributed to the Task 3.0 COPV database extension objective included baseline structural strength, failure mode and safe-life, impact damage tolerance, sustained load/impact effect, and materials compatibility. WSTF was also responsible for establishing impact protection and control requirements under Task 8.0 of the program. This included developing a methodology for establishing an impact control plan. Seven test reports detail the work done at WSTF. As such, this document contributes to the database of information regarding COPV behavior that will ensure performance benefits and safety are maintained throughout vessel service life.

Investigation of the relationship between illogical thoughts and dependence on others and marriage compatibility in the Iranian Veterans exposed to chemicals in Iran-Iraq War.

PubMed

Afkar, A H; Mahbobubi, M; Neyakan Shahri, M; Mohammadi, M; Jalilian, F; Moradi, F

2014-05-08

Marital satisfaction is one of the main determinants of a family's correct function. A large number of veterans have been reported to suffer from depression, anxiety, mood disorders, post-traumatic stress disorder, and physical disorders. The objective of this study is to examine association between Illogical thoughts and Dependence on Others and Marriage Compatibility in the Iranian Veterans Exposed to Chemicals in Iran-Iraq War. The present cross-sectional, analytical study was conducted on 200 veterans exposed to chemicals who were covered by the Foundation of Martyrs and Veterans Affairs, Gilangharb, Kermanshah, Iran. The study sample size was determined according to Krejcie and Morgan formula and the subjects were selected through random sampling. The study data were collected using marriage compatibility questionnaire, illogical thoughts questionnaire, and dependence on others questionnaire. The study data were analyzed using the SPSS statistical software (version18). Pearson correlation coefficient, multiple regression, and t-test were used in order to determine the relationships among the variables and compare the means. The findings of the current study revealed no significant relationship between dependence on others, anxious attention, helplessness, avoiding problems, perfectionism, and autonomy and marriage compatibility. However, a significant relationship was found between failure and marriage compatibility. Overall, the findings of the present study showed that the veterans of Gilangharb did not have disorders, but depended on others, particularly their spouses, due to their abnormal physical status. Sometimes, they cannot even do their personal tasks which results in their dependence on others eventually putting the veterans under pressure and stress.

Tailoring of TiO2 films by H2SO4 treatment and UV irradiation to improve anticoagulant ability and endothelial cell compatibility.

PubMed

Liao, Yuzhen; Li, Linhua; Chen, Jiang; Yang, Ping; Zhao, Ansha; Sun, Hong; Huang, Nan

2017-07-01

Surfaces with dual functions that simultaneously exhibit good anticoagulant ability and endothelial cell (EC) compatibility are desirable for blood contact materials. However, these dual functions have rarely been achieved by inorganic materials. In this study, titanium dioxide (TiO 2 ) films were treated by sulphuric acid (H 2 SO 4 ) and ultraviolet (UV) irradiation successively (TiO 2 H 2 SO 4 -UV), resulting in good anticoagulant ability and EC compatibility simultaneously. We found that UV irradiation improved the anticoagulant ability of TiO 2 films significantly while enhancing EC compatibility, though not significantly. The enhanced anticoagulant ability could be related to the oxidation of surface-adsorbed hydrocarbons and increased hydrophilicity. The H 2 SO 4 treatment improved the anticoagulant ability of TiO 2 films slightly, while UV irradiation improved the anticoagulant ability strongly. The enhanced EC compatibility could be related to the increased surface roughness and positive charges on the surface of the TiO 2 films. Furthermore, the time-dependent degradation of the enhanced EC compatibility and anticoagulant ability of TiO 2 H 2 SO 4 -UV was observed. In summary, TiO 2 H 2 SO 4 -UV expressed both excellent anticoagulant ability and good EC compatibility at the same time, which could be desirable for blood contact materials. However, the compatibility of TiO 2 H 2 SO 4 -UV with smooth muscle cells (SMCs) and macrophages was also improved. More effort is still needed to selectively improve EC compatibility on TiO 2 films for better re-endothelialization. Copyright © 2017 Elsevier B.V. All rights reserved.

Human health impacts of drinking water (surface and ground) pollution Dakahlyia Governorate, Egypt

NASA Astrophysics Data System (ADS)

Mandour, R. A.

2012-09-01

This study was done on 30 drinking tap water samples (surface and ground) and 30 urine samples taken from patients who attended some of Dakahlyia governorate hospitals. These patients were complaining of poor-quality tap water in their houses, which was confirmed by this study that drinking water is contaminated with trace elements in some of the studied areas. The aim of this study was to determine the relationship between the contaminant drinking water (surface and ground) in Dakahlyia governorate and its impact on human health. This study reports the relationship between nickel and hair loss, obviously shown in water and urine samples. Renal failure cases were related to lead and cadmium contaminated drinking water, where compatibilities in results of water and urine samples were observed. Also, liver cirrhosis cases were related to iron-contaminated drinking water. Studies of these diseases suggest that abnormal incidence in specific areas is related to industrial wastes and agricultural activities that have released hazardous and toxic materials in the drinking water and thereby led to its contamination in these areas. We conclude that trace elements should be removed from drinking water for human safety.

The Rules of Variation Expanded, Implications for the Research on Compatible Genomics.

PubMed

Castro-Chavez, Fernando

2011-05-12

The main focus of this article is to present the practical aspect of the code rules of variation and the search for a second set of genomic rules, including comparison of sequences to understand how to preserve compatible organisms in danger of extinction and how to generate biodiversity. Three new rules of variation are introduced: 1) homologous recombination, 2) a healthy fertile offspring, and 3) comparison of compatible genomes. The novel search in the natural world for fully compatible genomes capable of homologous recombination is explored by using examples of human polymorphisms in the LDLRAP1 gene, and by the production of fertile offspring by crossbreeding. Examples of dogs, llamas and finches will be presented by a rational control of: natural crossbreeding of organisms with compatible genomes (something already happening in nature), the current work focuses on the generation of new varieties after a careful plan. This study is presented within the context of biosemiotics, which studies the processing of information, signaling and signs by living systems. I define a group of organisms having compatible genomes as a single theme: the genomic species or population, able to speak the same molecular language through different accents, with each variety within a theme being a different version of the same book. These studies have a molecular, compatible genetics context. Population and ecosystem biosemiotics will be exemplified by a possible genetic damage capable of causing mutations by breaking the rules of variation through the coordinated patterns of atoms present in the 9/11 World Trade Center contaminated dust (U, Ba, La, Ce, Sr, Rb, K, Mn, Mg, etc.), combination that may be able to overload the molecular quality control mechanisms of the human body. I introduce here the balance of codons in the circular genetic code: 2[1(1)+1(3)+1(4)+4(2)]=2[2(2)+3(4)].

The Rules of Variation Expanded, Implications for the Research on Compatible Genomics

PubMed Central

Castro-Chavez, Fernando

2011-01-01

The main focus of this article is to present the practical aspect of the code rules of variation and the search for a second set of genomic rules, including comparison of sequences to understand how to preserve compatible organisms in danger of extinction and how to generate biodiversity. Three new rules of variation are introduced: 1) homologous recombination, 2) a healthy fertile offspring, and 3) comparison of compatible genomes. The novel search in the natural world for fully compatible genomes capable of homologous recombination is explored by using examples of human polymorphisms in the LDLRAP1 gene, and by the production of fertile offspring by crossbreeding. Examples of dogs, llamas and finches will be presented by a rational control of: natural crossbreeding of organisms with compatible genomes (something already happening in nature), the current work focuses on the generation of new varieties after a careful plan. This study is presented within the context of biosemiotics, which studies the processing of information, signaling and signs by living systems. I define a group of organisms having compatible genomes as a single theme: the genomic species or population, able to speak the same molecular language through different accents, with each variety within a theme being a different version of the same book. These studies have a molecular, compatible genetics context. Population and ecosystem biosemiotics will be exemplified by a possible genetic damage capable of causing mutations by breaking the rules of variation through the coordinated patterns of atoms present in the 9/11 World Trade Center contaminated dust (U, Ba, La, Ce, Sr, Rb, K, Mn, Mg, etc.), combination that may be able to overload the molecular quality control mechanisms of the human body. I introduce here the balance of codons in the circular genetic code: 2[1(1)+1(3)+1(4)+4(2)]=2[2(2)+3(4)]. PMID:21743816

Robust integration schemes for junction-based modulators in a 200mm CMOS compatible silicon photonic platform (Conference Presentation)

NASA Astrophysics Data System (ADS)

Szelag, Bertrand; Abraham, Alexis; Brision, Stéphane; Gindre, Paul; Blampey, Benjamin; Myko, André; Olivier, Segolene; Kopp, Christophe

2017-05-01

Silicon photonic is becoming a reality for next generation communication system addressing the increasing needs of HPC (High Performance Computing) systems and datacenters. CMOS compatible photonic platforms are developed in many foundries integrating passive and active devices. The use of existing and qualified microelectronics process guarantees cost efficient and mature photonic technologies. Meanwhile, photonic devices have their own fabrication constraints, not similar to those of cmos devices, which can affect their performances. In this paper, we are addressing the integration of PN junction Mach Zehnder modulator in a 200mm CMOS compatible photonic platform. Implantation based device characteristics are impacted by many process variations among which screening layer thickness, dopant diffusion, implantation mask overlay. CMOS devices are generally quite robust with respect to these processes thanks to dedicated design rules. For photonic devices, the situation is different since, most of the time, doped areas must be carefully located within waveguides and CMOS solutions like self-alignment to the gate cannot be applied. In this work, we present different robust integration solutions for junction-based modulators. A simulation setup has been built in order to optimize of the process conditions. It consist in a Mathlab interface coupling process and device electro-optic simulators in order to run many iterations. Illustrations of modulator characteristic variations with process parameters are done using this simulation setup. Parameters under study are, for instance, X and Y direction lithography shifts, screening oxide and slab thicknesses. A robust process and design approach leading to a pn junction Mach Zehnder modulator insensitive to lithography misalignment is then proposed. Simulation results are compared with experimental datas. Indeed, various modulators have been fabricated with different process conditions and integration schemes. Extensive electro-optic characterization of these components will be presented.

Herbal compatibility of traditional Chinese medical formulas for acquired immunodeficiency syndrome.

PubMed

Cui, Meng; Li, Jinghua; Li, Haiyan; Song, Chunxin

2012-09-01

Because herbal compatibility is one of the most important reasons why Traditional Chinese Medcine (TCM) formulas are effective for acquired immunodeficiency syndrome (AIDS), our study aimed to determine the compatibility of herbs based on published AIDS clinical research in Chinese periodicals. To achieve this aim, we designed a new data-mining algorithm according to TCM data characteristics. We found 25 clinical AIDS studies, all using Chinese herbs for treatment, in the Traditional Chinese Medicine Database System, and information on diagnosis and treatment was extracted. To find out herbal compatibility, especially the formulae for herbal combinations, we proposed an improved association rule algorithm based on the frequency of combinations. In this algorithm, all the compatibility relationships were displayed in a tree structure, by which the relationship between formulas and their derivation could be clearly inferred. Data analysis showed that approximately 100 herbs have been used for treating AIDS. Based on the whole herb compatibility tree, we calculated a basic formula for AIDS: Huang Qi combined with Ren Shen, Fu Ling, Bai Zhu, Bai Zhu, Dang Gui, and Bai Shao. This formula, deriving from most of clinical prescriptions, and was chosed by most of clinicians for AIDS treatment. From data mining we found that Qi replenishment and detoxification were the main treatment principles, which coincided with the AIDS pathological mechanism in which immune function is destroyed by human immunodeficiency virus (HIV). Our data-mining results suggest that the core TCM treatment of AIDS is replenishing Qi and detoxification, by which AIDS patients' immune system may be enhanced. Compatibility of Huang Qi with some frequently-used herbs have shown real efficacy in clinical practice, which warrants pharmacological research in the future.

Brushing Your Spacecrafts Teeth: A Review of Biological Reduction Processes for Planetary Protection Missions

NASA Technical Reports Server (NTRS)

Pugel, D. E. (Betsy); Rummel, J. D.; Conley, Catharine

2017-01-01

Much like keeping your teeth clean, where you brush away biofilms that your dentist calls "plaque," there are various methods to clean spaceflight hardware of biological contamination, known as biological reduction processes. Different approaches clean your hardware's "teeth" in different ways and with different levels of effectiveness. We know that brushing at home with a simple toothbrush is convenient and has a different level of impact vs. getting your teeth cleaned at the dentist. In the same way, there are some approaches to biological reduction that may require simple tools or more complex implementation approaches (think about sonicating or just soaking your dentures, vs. brushing them). There are also some that are more effective for different degrees of cleanliness and still some that have materials compatibility concerns. In this article, we review known and NASA-certified approaches for biological reduction, pointing out materials compatibility concerns and areas where additional research is needed.

Brushing Your Spacecrafts Teeth: A Review of Biological Reduction Processes for Planetary Protection Missions

NASA Technical Reports Server (NTRS)

Pugel, D.E. (Betsy); Rummel, J. D.; Conley, C. A.

2017-01-01

Much like keeping your teeth clean, where you brush away biofilms that your dentist calls plaque, there are various methods to clean spaceflight hardware of biological contamination, known as biological reduction processes. Different approaches clean your hardwares teeth in different ways and with different levels of effectiveness. We know that brushing at home with a simple toothbrush is convenient and has a different level of impact vs. getting your teeth cleaned at the dentist. In the same way, there are some approaches to biological reduction that may require simple tools or more complex implementation approaches (think about sonicating or just soaking your dentures, vs. brushing them). There are also some that are more effective for different degrees of cleanliness and still some that have materials compatibility concerns. In this article, we review known and NASA-certified approaches for biological reduction, pointing out materials compatibility concerns and areas where additional research is needed.

Testing for EMC (electromagnetic compatibility) in the clinical environment.

PubMed

Paperman, D; David, Y; Martinez, M

1996-01-01

Testing for electromagnetic compatibility (EMC) in the clinical environment introduces a host of complex conditions not normally encountered under laboratory conditions. In the clinical environment, various radio-frequency (RF) sources of electromagnetic interference (EMI) may be present throughout the entire spectrum of interest. Isolating and analyzing the impact from the sources of interference to medical devices involves a multidisciplinary approach based on training in, and knowledge of, the following: operation of medical devices and their susceptibility to EMI; RF propagation modalities and interaction theory; spectrum analysis systems and techniques (preferably with signature analysis capabilities) and calibrated antennas; the investigation methodology of suspected EMC problems, and testing protocols and standards. Using combinations of standard test procedures adapted for the clinical environment with personnel that have an understanding of radio-frequency behavior increases the probability of controlling, proactively, EMI in the clinical environment, thus providing for a safe and more effective patient care environment.

Is eating pleasure compatible with healthy eating? A qualitative study on Quebecers' perceptions.

PubMed

Landry, Myriam; Lemieux, Simone; Lapointe, Annie; Bédard, Alexandra; Bélanger-Gravel, Ariane; Bégin, Catherine; Provencher, Véronique; Desroches, Sophie

2018-06-01

Given that traditional interventions promoting the adoption of a healthy diet are having limited impacts on the population's food choices and eating behaviours, researchers and health practitioners could explore alternative strategies such as the use of eating pleasure to promote healthy eating. To inform future interventions using this approach, this study aimed to explore how a sample of Quebecers perceives and defines eating pleasure and healthy eating. Specific objectives were to verify what commonalities can be found between their definitions of eating pleasure and healthy eating, and what differences can be observed in their answers based on their sex and body mass index (BMI). Twelve focus groups were conducted in Quebec City, Canada, among women and men with a normal weight and with obesity (n = 92). Verbatim transcripts were double-coded using NVivo10. Participants mostly defined eating pleasure through food characteristics related to sensory qualities and psychosocial contexts. In contrast, they mostly mentioned food characteristics related to nutritional quality and ways to regulate eating behaviours to define healthy eating. Most salient perceptions were similar among subgroups based on sex or BMI. Results showed that in participants' perceptions, the concepts of eating pleasure and healthy eating were different, but appeared to be mostly compatible, which makes the integration of eating pleasure a promising avenue for interventions promoting healthy eating. Copyright © 2018 Elsevier Ltd. All rights reserved.

Whorf Reloaded: Language Effects on Nonverbal Number Processing in First Grade--A Trilingual Study

ERIC Educational Resources Information Center

Pixner, S.; Moeller, K.; Hermanova, V.; Nuerk, H. -C.; Kaufmann, L.

2011-01-01

The unit-decade compatibility effect is interpreted to reflect processes of place value integration in two-digit number magnitude comparisons. The current study aimed at elucidating the influence of language properties on the compatibility effect of Arabic two-digit numbers in Austrian, Italian, and Czech first graders. The number word systems of…

Compatibility Study of Nanofiltration and Reverse Osmosis Membranes with 1 Cyclohexylpiperidenium Bicarbonate Solutions

DOE Data Explorer

Adhikari, Birendra; Jones, Michael G.; Orme, Christopher J.; Wendt, Daniel S.; Wilson, Aaron D.

2015-10-01

The switchable polarity solvent forward osmosis (SPS FO) desalination process requires use of a polishing filtration step to remove trace quantities of draw solution from the product water stream. Selected nanofiltration (NF) and reverse osmosis (RO) membranes were tested for their ability to recover water from 1-cyclohexylpiperidenium bicarbonate solutions in this application. This submission includes the experimental data used to calculate NF and RO membrane flux-normalized net driving pressure (FNNDP) and flux-normalized rejection (FNR) performance in recovering water from 1-cyclohexylpiperidenium bicarbonate solutions. This data is further described and visualized in the manuscript entitled "Compatibility study of nanofiltration and reverse osmosis membranes with 1 cyclohexylpiperidenium bicarbonate solutions" (see attached Compatibility Study Manuscript).

The Transcriptional Regulator, CosR, Controls Compatible Solute Biosynthesis and Transport, Motility and Biofilm Formation in Vibrio cholerae

PubMed Central

Shikuma, Nicholas J.; Davis, Kimberly R.; Fong, Jiunn N. C.; Yildiz, Fitnat H.

2012-01-01

SUMMARY Vibrio cholerae inhabits aquatic environments and colonizes the human digestive tract to cause the disease cholera. In these environments, V. cholerae copes with fluctuations in salinity and osmolarity by producing and transporting small, organic, highly soluble molecules called compatible solutes, which counteract extracellular osmotic pressure. Currently, it is unclear how V. cholerae regulates the expression of genes important for the biosynthesis or transport of compatible solutes in response to changing salinity or osmolarity conditions. Through a genome-wide transcriptional analysis of the salinity response of V. cholerae, we identified a transcriptional regulator we name CosR for compatible solute regulator. The expression of cosR is regulated by ionic strength and not osmolarity. A transcriptome analysis of a ΔcosR mutant revealed that CosR represses genes involved in ectoine biosynthesis and compatible solute transport in a salinity-dependent manner. When grown in salinities similar to estuarine environments, CosR activates biofilm formation and represses motility independently of its function as an ectoine regulator. This is the first study to characterize a compatible solute regulator in V. cholerae and couples the regulation of osmotic tolerance with biofilm formation and motility. PMID:22690884

Simpler and equitable allocation of kidneys from postmortem donors primarily based on full HLA-DR compatibility.

PubMed

Doxiadis, Ilias I N; de Fijter, Johan W; Mallat, Marko J K; Haasnoot, Geert W; Ringers, Jan; Persijn, Guido G; Claas, Frans H J

2007-05-15

The introduction of human leukocyte antigen (HLA)-matching in nonliving kidney transplantation has resulted into a better graft outcome, but also in an increase of waiting time, especially for patients with rare HLA phenotypes. We addressed the question of the differential influence of HLA-DR-matching versus HLA-A,B in clinical kidney transplantation. We used Kaplan-Meier product limit method to estimate survival rates, and Cox proportional hazard regression for the estimation of relative risks (Hazard-ratios) for different variables. A single center study (n=456 transplants, performed between 1985 and 1999) showed that full HLA-DR compatibility leads to a lower incidence of biopsy confirmed acute rejections in the first 180 posttransplantation days. These results were substantiated using the Eurotransplant database (n=39,205 transplants performed between 1985 and 2005) where graft survival in the full HLA-DR compatible group was significantly better than in the incompatible. An additional positive effect of HLA-A,B matching was only found in the full HLA-DR compatible group. In both studies, the introduction of a single HLA-DR incompatibility eliminates the HLA-A,B matching effect. We propose to allocate postmortem kidneys only to patients with full HLA-DR compatibility, and use HLA-A,B compatibility as an additional selection criterion. All patients, irrespective of their ethnic origin, will profit since the polymorphism of HLA-DR is by far lower than that of HLA-A,B. Excessive kidney travel and cold ischemia time will be significantly reduced.

Satellite mirror systems for providing terrestrial power - System concept

NASA Technical Reports Server (NTRS)

Billman, K. W.; Gilbreath, W. P.; Bowen, S. W.

1978-01-01

A system of orbiting reflectors, SOLARES, has been studied as a possible means of providing terrestrial power with a space system of minimum mass and complexity. The key impact that such a system, providing continuous and slightly concentrated insolation, makes on the economic viability of solar farming is demonstrated. New developments in solar sailing are incorporated to reduce mirror mass and transportation cost. The system is compatible with incremental implementation and continual expansion to produce the world's power needs. Key technology, environmental, and economic issues and payoffs are identified. SOLARES appears to be economically superior to other advanced, and even conventional, energy systems and could be scaled to completely abate our fossil fuel usage for power generation.

Small-Molecule Organic Photovoltaic Modules Fabricated via Halogen-Free Solvent System with Roll-to-Roll Compatible Scalable Printing Method.

PubMed

Heo, Youn-Jung; Jung, Yen-Sook; Hwang, Kyeongil; Kim, Jueng-Eun; Yeo, Jun-Seok; Lee, Sehyun; Jeon, Ye-Jin; Lee, Donmin; Kim, Dong-Yu

2017-11-15

For the first time, the photovoltaic modules composed of small molecule were successfully fabricated by using roll-to-roll compatible printing techniques. In this study, blend films of small molecules, BTR and PC 71 BM were slot-die coated using a halogen-free solvent system. As a result, high efficiencies of 7.46% and 6.56% were achieved from time-consuming solvent vapor annealing (SVA) treatment and roll-to-roll compatible solvent additive approaches, respectively. After successful verification of our roll-to-roll compatible method on small-area devices, we further fabricated large-area photovoltaic modules with a total active area of 10 cm 2 , achieving a power conversion efficiency (PCE) of 4.83%. This demonstration of large-area photovoltaic modules through roll-to-roll compatible printing methods, even based on a halogen-free solvent, suggests the great potential for the industrial-scale production of organic solar cells (OSCs).

Long-Range Technological Impact on Computer-Aided Product Development at DMA (Defense Mapping Agency).

DTIC Science & Technology

1986-07-01

maintainability, enhanceability, portability, flexibility, reusability of components, expected market or production life span, upward compatibility, integration...cost) but, most often, they involve global marketing and production objectives. A high life- cycle cost may be accepted in exchange for some other...ease of integration. More importantly, these results could be interpreted as suggesting the need to use a mixed approach where one uses a subset of

Technologies and Equipment For Military and Public Safety Emergency Response. Technology Needs Performance Deficiencies

DTIC Science & Technology

2001-04-30

APPROACH - Reduce cooling system weight and power thru miniaturization of its compressor, heat exchangers , and other components; and thru highly...research, but a visualized concept provides direction – Microelectromechanical Systems – Nanotech based materials – Fused sensor displays – MCC microtubes ...and Spine impact protection • Anti-Fog Face shield • Flame/ Heat resistance • Compatible with Body Cooling System • Technology Transition to Public

YJ101-YF-17 Aircraft Prototype Development Summary

DTIC Science & Technology

1977-01-01

requirements were selected to evaluate engi of the considerations was the impact of idl operation, while other arenas as altitude f loads , EMI, and JP...designed to be compatible with the air combat fighter installation environment temperatures and "g" loads . 2.2.1 Evaluation Testing Program. An...ratio per stage. It has a cylindrical hub and tapered tip flowpath to provide high loading within reasonable rim speeds. Development

Inducing PLA/starch compatibility through butyl-etherification of waxy and high amylose starch.

PubMed

Wokadala, Obiro Cuthbert; Emmambux, Naushad Mohammad; Ray, Suprakas Sinha

2014-11-04

In this study, waxy and high amylose starches were modified through butyl-etherification to facilitate compatibility with polylactide (PLA). Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy and wettability tests showed that hydrophobic butyl-etherified waxy and high amylose starches were obtained with degree of substitution values of 2.0 and 2.1, respectively. Differential scanning calorimetry, tensile testing, and scanning electron microscopy (SEM) demonstrated improved PLA/starch compatibility for both waxy and high amylose starch after butyl-etherification. The PLA/butyl-etherified waxy and high amylose starch composite films had higher tensile strength and elongation at break compared to PLA/non-butyl-etherified composite films. The morphological study using SEM showed that PLA/butyl-etherified waxy starch composites had a more homogenous microstructure compared to PLA/butyl-etherified high amylose starch composites. Thermogravimetric analysis showed that PLA/starch composite thermal stability decreased with starch butyl-etherification for both waxy and high amylose starches. This study mainly demonstrates that PLA/starch compatibility can be improved through starch butyl-etherification. Copyright © 2014 Elsevier Ltd. All rights reserved.

Enhancing creativity: Proper body posture meets proper emotion.

PubMed

Hao, Ning; Xue, Hua; Yuan, Huan; Wang, Qing; Runco, Mark A

2017-02-01

This study tested whether compatibility or incompatibility between body posture and emotion was beneficial for creativity. In Study 1, participants were asked to solve the Alternative Uses Task (AUT) problems when performing open or closed body posture in positive or negative emotional state respectively. The results showed that originality of AUT performance was higher in the compatible conditions (i.e., open-positive and closed-negative) than in the incompatible conditions (i.e., closed-positive and open-negative). In Study 2, the compatibility effect was replicated in both the AUT and the Realistic Presented Problem test (i.e., RPP). Moreover, it was revealed that participants exhibited the highest associative flexibility in the open-positive condition, and the highest persistence in the closed-negative condition. These findings indicate that compatibility between body posture and emotion is beneficial for creativity. This may be because when the implicit emotions elicited by body posture match explicit emotions, the effects of emotions on creativity are enhanced, therefore promoting creativity through the flexibility or the persistence pathway respectively. Copyright © 2016 Elsevier B.V. All rights reserved.

Cumulative biological impacts framework for solar energy projects in the California Desert

USGS Publications Warehouse

Davis, Frank W.; Kreitler, Jason R.; Soong, Oliver; Stoms, David M.; Dashiell, Stephanie; Hannah, Lee; Wilkinson, Whitney; Dingman, John

2013-01-01

This project developed analytical approaches, tools and geospatial data to support conservation planning for renewable energy development in the California deserts. Research focused on geographical analysis to avoid, minimize and mitigate the cumulative biological effects of utility-scale solar energy development. A hierarchical logic model was created to map the compatibility of new solar energy projects with current biological conservation values. The research indicated that the extent of compatible areas is much greater than the estimated land area required to achieve 2040 greenhouse gas reduction goals. Species distribution models were produced for 65 animal and plant species that were of potential conservation significance to the Desert Renewable Energy Conservation Plan process. These models mapped historical and projected future habitat suitability using 270 meter resolution climate grids. The results were integrated into analytical frameworks to locate potential sites for offsetting project impacts and evaluating the cumulative effects of multiple solar energy projects. Examples applying these frameworks in the Western Mojave Desert ecoregion show the potential of these publicly-available tools to assist regional planning efforts. Results also highlight the necessity to explicitly consider projected land use change and climate change when prioritizing areas for conservation and mitigation offsets. Project data, software and model results are all available online.

Equine Vaccines: How, When and Why? Report of the Vaccinology Session, French Equine Veterinarians Association, 2016, Reims.

PubMed

Paillot, Romain; Marcillaud Pitel, Christel; D'Ablon, Xavier; Pronost, Stéphane

2017-12-04

To date, vaccination is one of the most efficient methods of prevention against equine infectious diseases. The vaccinology session, which was organised during the annual meeting of the French Equine Veterinarians Association (AVEF) at Reims (France) in 2016, aimed to approach three subjects of importance for the equine industry. Vaccination against three major equine diseases were used as examples: equine influenza (equine influenza virus), rhinopneumonitis (equine herpes virus 1/4), and tetanus ( Clostridium tetani neuro-toxin). (1) Emergency vaccination: while it has been very successful to reduce the impact of equine influenza epizooties and it is also recommended for tetanus in case of surgery and accident, the benefit of emergency vaccination against equine herpes virus 1/4 remains arguable; (2) Compatibility of equine vaccines from different brands: despite being a frequent concerns for equine veterinarians, little information is available about the compatibility of equine vaccines from different commercial origins. The consequence of mixing different equine vaccines targeting the same disease is believed to be limited but scientific evidences are sparse; and, (3) Laps vaccination and vaccine shortage: they could have serious consequences in terms of protection and their impact should be evaluated on a case by case basis, taking into account the risk of contact with the pathogen and the effect on herd immunity.

Explosive Compations of Intermetallic-Forming Powder Mixtures for Fabricating Structural Energetic Materials

NASA Astrophysics Data System (ADS)

Du, S. W.; Aydelotte, B.; Fondse, D.; Wei, C.-T.; Jiang, F.; Herbold, E.; Vecchio, K.; Meyers, M. A.; Thadhani, N. N.

2009-12-01

A double-tube implosion geometry is used to explosively shock consolidate intermetallic-forming Ni-Al, Ta-Al, Nb-Al, Mo-Al and W-Al powder mixtures for fabricating bulk structural energetic materials, with mechanical strength and ability to undergo impact-initiated exothermic reactions. The compacts are characterized based on uniformity of micro structure and degree of densification. Mechanical properties of the compacts are characterized over the strain-rate range of 10-3 to 104 s-1. The impact reactivity is determined using rod-on-anvil experiments, in which disk-shaped compacts mounted on a copper projectile, are impacted against a steel anvil in using a 7.62 mm gas gun. The impact reactivity of the various explosively-consolidated reactive powder mixture compacts is correlated with overall kinetic energy and impact stress to determine their influence on threshold for reaction initiation. The characteristics of the various compacts, their mechanical properties and impact-initiated chemical reactivity will be described in this paper.

Long-term impacts on sewers following food waste disposer installation in housing areas.

PubMed

Mattsson, Jonathan; Hedström, Annelie; Viklander, Maria

2014-01-01

To increase biogas generation and decrease vehicle transportation of solid waste, the integration of food waste disposers (FWDs) into the wastewater system has been proposed. However, concerns have been raised about the long-term impact of the additional load of the FWDs on sewer systems. To examine the said impact, this study has used closed-circuit television inspection techniques to evaluate the status of 181 concrete pipes serving single family housing areas with a diameter of 225 mm, ranging from a 100% connection rate of households with an FWD to none. A minor study was also performed on a multi-family housing area, where mainly plastic pipes (200 mm) were used. The extent and distribution of deposits related to the ratio of FWDs, inclination and pipe sagging (backfalls) were ascertained by using linear regression and analysis of variance. The results showed that FWDs have had an impact on the level of deposits in the sewer, but this has, in turn, been of minor significance. With a high connection rate of FWDs upstream of a pipe, the extent of the total level of deposits, as well as finer sediments, was statistically determined to be greater. However, the majority of the deposits were observed to be small, which would suggest the impact of FWDs on sewer performance to be minor. As food waste not compatible with the FWD was seen in the sewers, educational campaigns could be beneficial to further lower the risks of sewer blocking.

Investigation of the Relationship between Illogical Thoughts and Dependence on Others and Marriage Compatibility in the Iranian Veterans Exposed to Chemicals in Iran-Iraq War

PubMed Central

Afkar, A. H.; Mahboubi, M.; Shahri, M. Neyakan; Mohamadi, M.; Jalilian, F.; Moradi, F.

2014-01-01

Background: Marital satisfaction is one of the main determinants of a family’s correct function. A large number of veterans have been reported to suffer from depression, anxiety, mood disorders, post-traumatic stress disorder, and physical disorders. The objective of this study is to examine association between Illogical thoughts and Dependence on Others and Marriage Compatibility in the Iranian Veterans Exposed to Chemicals in Iran-Iraq War. Methods: The present cross-sectional, analytical study was conducted on 200 veterans exposed to chemicals who were covered by the Foundation of Martyrs and Veterans Affairs, Gilangharb, Kermanshah, Iran. The study sample size was determined according to Krejcie and Morgan formula and the subjects were selected through random sampling. The study data were collected using marriage compatibility questionnaire, illogical thoughts questionnaire, and dependence on others questionnaire. The study data were analyzed using the SPSS statistical software (version18). Pearson correlation coefficient, multiple regression, and t-test were used in order to determine the relationships among the variables and compare the means. Results: The findings of the current study revealed no significant relationship between dependence on others, anxious attention, helplessness, avoiding problems, perfectionism, and autonomy and marriage compatibility. However, a significant relationship was found between failure and marriage compatibility. Discussion: Overall, the findings of the present study showed that the veterans of Gilangharb did not have disorders, but depended on others, particularly their spouses, due to their abnormal physical status. Sometimes, they cannot even do their personal tasks which results in their dependence on others eventually putting the veterans under pressure and stress. PMID:25168982

Possible environmental effects of increased coal use in California

NASA Technical Reports Server (NTRS)

Carey, D. L.

1978-01-01

If coal is to be utilized in California it must be made compatible with the state's drive toward restoring environmental quality. The impacts resulting from coal's mining and transportation, or from water consumption, water quality degradation and electric transmission line routing can probably be adequately mitigated through strong and early planning efforts, the use of improved control and process technologies, and sincere utility commitment. The socioeconomic impacts may prove somewhat more difficult to satisfactorily mitigate. Of greatest concern is adequate control of generated air pollutants and disposal of solid and liquid wastes since acceptable technologies or handling techniques have yet to be conclusively demonstrated.

Chemical compatibility of cartridge materials

NASA Technical Reports Server (NTRS)

Wilcox, Roy C.; Zee, R. H.

1991-01-01

This twelve month progress report deals with the chemical compatibility of semiconductor crystals grown in zero gravity. Specifically, it studies the chemical compatibility between TZM, a molybdenum alloy containing titanium and zirconium, and WC 103, a titanium alloy containing Niobium and Hafnium, and Gallium arsenide (GaAs) and Cadmium Zinc Tellurite (CdZnTe). Due to the health hazards involved, three approaches were used to study the chemical compatibility between the semiconductor and cartridge materials: reaction retort, thermogravimetric analysis, and bulk cylindrical cartridge containers. A scanning electron microscope with an energy dispersive X-ray analyzer was used to examine all samples after testing. The first conclusion drawn is that reaction rates with TZM were not nearly as great as they were with WC 103. Second, the total reaction between GaAs and WC 103 was almost twice that with TZM. Therefore, even though WC 103 is easier to fabricate, at least half of the cartridge thickness will be degraded if contact is made with one of the semiconductor materials leading to a loss of strength properties.

Novel multi-day sputum transport reagent works with routine tuberculosis tests and eliminates need for cold chain: Preliminary study of compatibility with the Xpert® MTB/RIF assay.

PubMed

Kelly-Cirino, Cassandra D; Curry, Patricia S; Marola, Jamie L; Helstrom, Niels K; Salfinger, Max

2016-11-01

OMNIgene®•SPUTUM (OM-S) is a sputum transport reagent designed to work with all tuberculosis diagnostics and eliminate the need for cold chain. The aim of this preliminary study was to assess the compatibility of OM-S-treated sputum with the Xpert® MTB/RIF assay. Fifty-five characterized sputa from the FIND TB Specimen Bank were used. Compatibility of OM-S was assessed for both Xpert sample preparation methods: H.1 protocol (sediment, n=25) and H.2 protocol (direct expectorate, n=30). All controls were prepared using the H.2 protocol. Results revealed 100% concordance of MTB/RIF results for all except the low-positive group in the H.1 study arm (n=10; 88% concordance). OM-S-treated sputa were successful in both protocols; if the Xpert buffer is not added during the H.2 procedure, sample viscosity may require repeat testing. Using OM-S could offer users flexibility in clinical testing algorithms. Larger compatibility studies are warranted, particularly with respect to MTB/RIF results for low-positive samples. Copyright © 2016 Elsevier Inc. All rights reserved.

Innate factors causing differences in gene flow frequency from transgenic rice to different weedy rice biotypes.

PubMed

Zuo, Jiao; Zhang, Lianju; Song, Xiaoling; Dai, Weimin; Qiang, Sheng

2011-06-01

The compatibility and outcrossing rates between transgenic rice and weedy rice biotypes have been studied in some previous cases. However, few studies have addressed the reasons for these differences. The present study compared the compatibility and outcrossing rates between transgenic rice and selected weedy rice biotypes using manual and natural crossing experiments to elucidate the key innate factors causing the different outcrossing rates. Hybrid seed sets from manual crossing between transgenic rice and weedy rice varied from 31.8 to 82.7%, which correlated directly with genetic compatibility. Moreover, the significant differences in the quantity of germinated donor pollens and pollen tubes entering the weedy rice ovule directly contributed to the different seed sets. The natural outcrossing rates varied from 0 to 6.66‰. The duration of flowering overlap was the key factor influencing natural outcrossing. Plant and panicle height also affected outcrossing success. From this study, it is concluded that the likelihood of gene flow between transgenic rice and weedy rice biotypes is primarily determined by floral synchronisation and secondarily influenced by genetic compatibility and some morphological characteristics. Copyright © 2011 Society of Chemical Industry.

Assessing the validity of health impact assessment predictions regarding a Japanese city's transition to core city status: a monitoring review.

PubMed

Hoshiko, M; Hara, K; Ishitake, T

2012-02-01

The validity of health impact assessment (HIA) predictions has not been accurately assessed to date. In recent years, legislative attempts to promote decentralization have been progressing in Japan, and Kurume was designated as a core city in April 2008. An HIA into the transition of Kurume to a core city was conducted before the event, but the recommendations were not accepted by city officials. The aim of this study was to examine the validity of predictions made in the HIA on Kurume by conducting a monitoring review into the accuracy of the predictions. Before Kurume was designated as a core city, the residents completed an online questionnaire and city officials were interviewed. The findings and recommendations were presented to the city administration. One year after the transition, a monitoring review was performed to clarify the accuracy of the HIA predictions by evaluating the correlation between the predictions and reality. Many of the HIA predictions were found to conflict with reality in Kurume. Prediction validity was evaluated for two groups: residents of Kurume and city officials. For the residents, 17% (2/12 items) of the predictions were found to be compatible, 58% (7/12) were incompatible and 25% (3/12) were difficult to evaluate. For city officials, the analysis was divided into those whose department was directly involved in tasks transferred to them (transfer tasks) and those whose department was not. For the city officials in departments responsible for conducting core city transfer tasks, 33% (3/9 items) of the predictions were found to be compatible, 33% (3/9) were incompatible and 33% (3/9) were difficult to evaluate. However, for the city officials whose responsibilities were unrelated to core city transfer tasks, 11% (1/9) of predictions were found to be compatible, 78% (7/9) were incompatible and 11% (1/9) were difficult to evaluate. Although it was possible to validate some of the HIA predictions, the results of this monitoring review found substantial discrepancies between the predictions and reality 1 year after the transition of Kurume to a core city. This suggests that the accuracy of HIA predictions may be called into question. However, it should be noted that the review was conducted very soon after the transition and the steering group was very small, which may explain why the HIA predictions were inaccurate. Further, long-term studies may be needed to assess the accuracy of HIA predictions in similar contexts. Copyright © 2011 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Compatible poliomyelitis cases in India during 2000.

PubMed Central

Kohler, Kathryn A.; Hlady, W. Gary; Banerjee, Kaushik; Gupta, Dhananjoy; Francis, Paul; Durrani, Sunita; Zuber, Patrick L. F.; Sutter, Roland W.

2003-01-01

OBJECTIVE: To describe the characteristics of compatible poliomyelitis cases and to assess the programmatic implications of clusters of such cases in India. METHODS: We described the characteristics of compatible poliomyelitis cases, identified clusters of compatible cases (two or more in the same district or neighbouring districts within two months), and examined their relationship to wild poliovirus cases. FINDINGS: There were 362 compatible cases in 2000. The incidence of compatible cases was higher in districts with laboratory-confirmed poliomyelitis cases than in districts without laboratory-confirmed cases. Of 580 districts, 96 reported one compatible case and 72 reported two or more compatible cases. Among these 168 districts with at least one compatible case, 123 had internal or cross- border clusters of compatible cases. In 27 districts with clusters of compatible cases, no wild poliovirus was isolated either in the same district or in neighbouring districts. Three of these 27 districts presented laboratory-confirmed poliomyelitis cases during 2001. CONCLUSION: Most clusters of compatible cases occurred in districts identified as areas with continuing wild poliovirus transmission and where mopping-up vaccination campaigns were carried out. As certification nears, areas with compatible poliomyelitis cases should be investigated and deficiencies in surveillance should be corrected in order to ensure that certification is justified. PMID:12640469

Dissociative adsorption of environment-friendly insulating medium C3F7CN on Cu(111) and Al(111) surface: A theoretical evaluation

NASA Astrophysics Data System (ADS)

Zhang, Xiaoxing; Li, Yi; Chen, Dachang; Xiao, Song; Tian, Shuangshuang; Tang, Ju; Wang, Dibo

2018-03-01

SF6 is extensively used in electrical applications because of its excellent insulation and arc extinguishing performance, but its strong greenhouse effect has negative impact on the atmosphere. The excellent performance of C3F7CN in greenhouse effect, insulation ability, safety, and thermal stability has been demonstrated, indicating that this compound can replace SF6 in electrical applications. However, little information is available on the compatibility of C3F7CN with metals, such as copper and aluminum, in devices. Material compatibility between new gas mixtures and materials used in Gas Insulated Switchgear (GIS) should be investigated to determine the long-term behavior of materials. In this paper, dissociative adsorption of C3F7CN on Cu (1 1 1) and Al (1 1 1) surfaces were analyzed based on density functional theory. Adsorption energy, charge transfer, density of states, and electron density difference of interaction between C3F7CN and two metals were analyzed. It was found that the adsorption energy of C3F7CN adsorbed on Cu (1 1 1) and Al (1 1 1) is both below 0.8 eV. This value indicates that the interaction between them is not very strong. In addition, the dissociation reaction path of gas molecules after adsorption requires certain activation energy. Therefore, C3F7CN and copper or aluminum have certain compatibility and the compatibility of C3F7CN with aluminum is better than that of copper. Related results provide a reference for predicting the aging mechanism of equipment and the selection or modification of major materials for equipment.

Benefits of fidelity: does host specialization impact nematode parasite life history and fecundity?

PubMed

Koprivnikar, J; Randhawa, H S

2013-04-01

The range of hosts used by a parasite is influenced by macro-evolutionary processes (host switching, host-parasite co-evolution), as well as 'encounter filters' and 'compatibility filters' at the micro-evolutionary level driven by host/parasite ecology and physiology. Host specialization is hypothesized to result in trade-offs with aspects of parasite life history (e.g. reproductive output), but these have not been well studied. We used previously published data to create models examining general relationships among host specificity and important aspects of life history and reproduction for nematodes parasitizing animals. Our results indicate no general trade-off between host specificity and the average pre-patent period (time to first reproduction), female size, egg size, or fecundity of these nematodes. However, female size was positively related to egg size, fecundity, and pre-patent period. Host compatibility may thus not be the primary determinant of specificity in these parasitic nematodes if there are few apparent trade-offs with reproduction, but rather, the encounter opportunities for new host species at the micro-evolutionary level, and other processes at the macro-evolutionary level (i.e. phylogeny). Because host specificity is recognized as a key factor determining the spread of parasitic diseases understanding factors limiting host use are essential to predict future changes in parasite range and occurrence.

The MRC CRASH trial--a large, simple randomised trial of steroids in head injury.

PubMed

Wasserberg, J

2004-01-01

CRASH (Corticosteroid randomisation after significant head injury) is a prospective multi-centre randomised double blind study of methylprednisolone versus placebo in mild, moderate and severe head injury. Patients are eligible up to 8 hours from injury. To date the CRASH trial has recruited 9000 patients. The trial is recruiting from 200 hospitals in 50 countries with another 100 centres planning to join the trial. The target for recruitment is 20,000 patients by 2006. The trial is wholly funded by the Medical Research Council of Great Britain and is multidisciplinary, involving doctors and nurses from a range of specialities. A recent systematic review of corticosteroids in head injury demonstrated a risk of death in the corticosteroid treated group 2% lower than in the control group. The 95% confidence interval ranges from a 60%, lower mortality to a 2% higher mortality. This result is compatible with there being no real benefit, but it is also compatible with there being a small benefit of a few percent. An improvement in mortality of 2% would theoretically save 10,000 lives per 500,000 patients treated. The global impact of such a treatment effect would be significant as the number of head injuries world-wide continues to rise.

Looking back in time: self-concept change affects visual perspective in autobiographical memory.

PubMed

Libby, Lisa K; Eibach, Richard P

2002-02-01

People who change often report that their old selves seem like "different people." Correlational (Study 1) and experimental (Studies 2 and 3) studies showed that participants tended to use a 3rd-person observer perspective when visualizing memories of actions that conflicted with their current self-concept. A similar pattern emerged when participants imagined performing actions that varied in self-concept compatibility (Study 4). The authors conclude that on-line judgments of an action's self-concept compatibility affect the perspective used for image construction. Study 5 shows applied implications. Use of the 3rd-person perspective when recalling past episodes of overindulgent eating was related to optimism about behaving differently at an upcoming Thanksgiving dinner. The authors discuss the effect of self-concept compatibility on cognitive and emotional reactions to past actions and consider the role of causal attributions in defining the self across time.

Hazardous waste management system design under population and environmental impact considerations.

PubMed

Yilmaz, Ozge; Kara, Bahar Y; Yetis, Ulku

2017-12-01

This paper presents a multi objective mixed integer location/routing model that aims to minimize transportation cost and risks for large-scale hazardous waste management systems (HWMSs). Risks induced by hazardous wastes (HWs) on both public and the environment are addressed. For this purpose, a new environmental impact definition is proposed that considers the environmentally vulnerable elements including water bodies, agricultural areas, coastal regions and forestlands located within a certain bandwidth around transportation routes. The solution procedure yields to Pareto optimal curve for two conflicting objectives. The conceptual model developed prior to mathematical formulation addresses waste-to-technology compatibility and HW processing residues to assure applicability of the model to real-life HWMSs. The suggested model was used in a case study targeting HWMS in Turkey. Based on the proposed solution, it was possible to identify not only the transportation routes but also a set of information on HW handling facilities including the types, locations, capacities, and investment/operational cost. The HWMS of this study can be utilized both by public authorities and private sector investors for planning purposes. Copyright © 2016 Elsevier Ltd. All rights reserved.

Impact of excipient interactions on solid dosage form stability.

PubMed

Narang, Ajit S; Desai, Divyakant; Badawy, Sherif

2012-10-01

Drug-excipient interactions in solid dosage forms can affect drug product stability in physical aspects such as organoleptic changes and dissolution slowdown, or chemically by causing drug degradation. Recent research has allowed the distinction in chemical instability resulting from direct drug-excipient interactions and from drug interactions with excipient impurities. A review of chemical instability in solid dosage forms highlights common mechanistic themes applicable to multiple degradation pathways. These common themes include the role of water and microenvironmental pH. In addition, special aspects of solid-state reactions with excipients and/or excipient impurities add to the complexity in understanding and modeling reaction pathways. This paper discusses mechanistic basis of known drug-excipient interactions with case studies and provides an overview of common underlying themes. Recent developments in the understanding of degradation pathways further impact methodologies used in the pharmaceutical industry for prospective stability assessment. This paper discusses these emerging aspects in terms of limitations of drug-excipient compatibility studies, emerging paradigms in accelerated stability testing, and application of mathematical modeling for prediction of drug product stability.

Compatibility of the insect pathogenic fungus Beauveria bassiana with neem against sweetpotato whitefly, Bemisia tabaci, on eggplant

USDA-ARS?s Scientific Manuscript database

A study on the compatibility of the entomopathogenic fungus Beauveria bassiana (Balsamo) Vuillemin (Ascomycota: Hypocreales) with neem was conducted against sweetpotato whitefly, Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae), on eggplant. Initially, three concentrations of B. bassiana (106, 1...

Role Specific Pupil/Science Teacher Interpersonal Compatibility and Science Attitudes.

ERIC Educational Resources Information Center

Vargo, Robert A.; Schafer, Larry E.

As science teaching becomes more inquiry oriented, science teachers are interacting more frequently with individual students. With increased interaction, pupil/science teacher interpersonal compatibility most likely contributes significantly to the development of students' science attitudes. The purpose of the present study was to examine the…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Natesan, K.; Momozaki, Y.; Li, M.

This report gives a description of the activities in design, fabrication, construction, and assembling of a pumped sodium loop for the sodium compatibility studies on advanced structural materials. The work is the Argonne National Laboratory (ANL) portion of the effort on the work project entitled, 'Sodium Compatibility of Advanced Fast Reactor Materials,' and is a part of Advanced Materials Development within the Reactor Campaign. The objective of this project is to develop information on sodium corrosion compatibility of advanced materials being considered for sodium reactor applications. This report gives the status of the sodium pumped loop at Argonne National Laboratory,more » the specimen details, and the technical approach to evaluate the sodium compatibility of advanced structural alloys. This report is a deliverable from ANL in FY2010 (M2GAN10SF050302) under the work package G-AN10SF0503 'Sodium Compatibility of Advanced Fast Reactor Materials.' Two reports were issued in 2009 (Natesan and Meimei Li 2009, Natesan et al. 2009) which examined the thermodynamic and kinetic factors involved in the purity of liquid sodium coolant for sodium reactor applications as well as the design specifications for the ANL pumped loop for testing advanced structural materials. Available information was presented on solubility of several metallic and nonmetallic elements along with a discussion of the possible mechanisms for the accumulation of impurities in sodium. That report concluded that the solubility of many metals in sodium is low (<1 part per million) in the temperature range of interest in sodium reactors and such trace amounts would not impact the mechanical integrity of structural materials and components. The earlier report also analyzed the solubility and transport mechanisms of nonmetallic elements such as oxygen, nitrogen, carbon, and hydrogen in laboratory sodium loops and in reactor systems such as Experimental Breeder Reactor-II, Fast Flux Test Facility, and Clinch River Breeder Reactor. Among the nonmetallic elements discussed, oxygen is deemed controllable and its concentration in sodium can be maintained in sodium for long reactor life by using cold-trap method. It was concluded that among the cold-trap and getter-trap methods, the use of cold trap is sufficient to achieve oxygen concentration of the order of 1 part per million. Under these oxygen conditions in sodium, the corrosion performance of structural materials such as austenitic stainless steels and ferritic steels will be acceptable at a maximum core outlet sodium temperature of {approx}550 C. In the current sodium compatibility studies, the oxygen concentration in sodium will be controlled and maintained at {approx}1 ppm by controlling the cold trap temperature. The oxygen concentration in sodium in the forced convection sodium loop will be controlled and monitored by maintaining the cold trap temperature in the range of 120-150 C, which would result in oxygen concentration in the range of 1-2 ppm. Uniaxial tensile specimens are being exposed to flowing sodium and will be retrieved and analyzed for corrosion and post-exposure tensile properties. Advanced materials for sodium exposure include austenitic alloy HT-UPS and ferritic-martensitic steels modified 9Cr-1Mo and NF616. Among the nonmetallic elements in sodium, carbon was assessed to have the most influence on structural materials since carbon, as an impurity, is not amenable to control and maintenance by any of the simple purification methods. The dynamic equilibrium value for carbon in sodium systems is dependent on several factors, details of which were discussed in the earlier report. The current sodium compatibility studies will examine the role of carbon concentration in sodium on the carburization-decarburization of advanced structural materials at temperatures up to 650 C. Carbon will be added to the sodium by exposure of carbon-filled iron tubes, which over time will enable carbon to diffuse through iron and dissolve into sodium. The method enables addition of dissolved carbon (without carbon particulates) in sodium that is of interest for materials compatibility evaluation. The removal of carbon from the sodium will be accomplished by exposing carbon-gettering alloys such as refractory metals that have a high partitioning coefficient for carbon and also precipitate carbides, thereby decreasing the carbon concentration in sodium.« less

The influence of the Japanese waving cat on the joint spatial compatibility effect: A replication and extension of Dolk, Hommel, Prinz, and Liepelt (2013).

PubMed

Puffe, Lydia; Dittrich, Kerstin; Klauer, Karl Christoph

2017-01-01

In a joint go/no-go Simon task, each of two participants is to respond to one of two non-spatial stimulus features by means of a spatially lateralized response. Stimulus position varies horizontally and responses are faster and more accurate when response side and stimulus position match (compatible trial) than when they mismatch (incompatible trial), defining the social Simon effect or joint spatial compatibility effect. This effect was originally explained in terms of action/task co-representation, assuming that the co-actor's action is automatically co-represented. Recent research by Dolk, Hommel, Prinz, and Liepelt (2013) challenged this account by demonstrating joint spatial compatibility effects in a task-setting in which non-social objects like a Japanese waving cat were present, but no real co-actor. They postulated that every sufficiently salient object induces joint spatial compatibility effects. However, what makes an object sufficiently salient is so far not well defined. To scrutinize this open question, the current study manipulated auditory and/or visual attention-attracting cues of a Japanese waving cat within an auditory (Experiment 1) and a visual joint go/no-go Simon task (Experiment 2). Results revealed that joint spatial compatibility effects only occurred in an auditory Simon task when the cat provided auditory cues while no joint spatial compatibility effects were found in a visual Simon task. This demonstrates that it is not the sufficiently salient object alone that leads to joint spatial compatibility effects but instead, a complex interaction between features of the object and the stimulus material of the joint go/no-go Simon task.

Behavioral and TMS Markers of Action Observation Might Reflect Distinct Neuronal Processes.

PubMed

Hétu, Sébastien; Taschereau-Dumouchel, Vincent; Meziane, Hadj Boumediene; Jackson, Philip L; Mercier, Catherine

2016-01-01

Transcranial magnetic stimulation (TMS) studies have shown that observing an action induces muscle-specific changes in corticospinal excitability. From a signal detection theory standpoint, this pattern can be related to sensitivity, which here would measure the capacity to distinguish between two action observation conditions. In parallel to these TMS studies, action observation has also been linked to behavioral effects such as motor priming and interference. It has been hypothesized that behavioral markers of action observation could be related to TMS markers and thus represent a potentially cost-effective mean of assessing the functioning of the action-perception system. However, very few studies have looked at possible relationships between these two measures. The aim of this study was to investigate if individual differences in sensitivity to action observation could be related to the behavioral motor priming and interference effects produced by action observation. To this end, 14 healthy participants observed index and little finger movements during a TMS task and a stimulus-response compatibility task. Index muscle displayed sensitivity to action observation, and action observation resulted in significant motor priming+interference, while no significant effect was observed for the little finger in both task. Nevertheless, our results indicate that the sensitivity measured in TMS was not related to the behavioral changes measured in the stimulus-response compatibility task. Contrary to a widespread assumption, the current results indicate that individual differences in physiological and behavioral markers of action observation may be unrelated. This could have important impacts on the potential use of behavioral markers in place of more costly physiological markers of action observation in clinical settings.

Are there good reasons for inequalities in access to renal transplantation in children?

PubMed

Hogan, Julien; Audry, Benoit; Harambat, Jérôme; Dunand, Olivier; Garnier, Arnaud; Salomon, Rémi; Ulinski, Tim; Macher, Marie-Alice; Couchoud, Cécile

2015-12-01

Studies in the USA and Europe have demonstrated inequalities in adult access to renal transplants. We previously demonstrate that the centre of treatment was impacting the time to be registered on the renal waiting list. In this study, we sought to ascertain the influence of patient and centre characteristics on the probability of transplantation within 1 year after registration on the waiting list for children. We included patients <18 years awaiting transplantation from the French ESRD National Registry. The effects of patient and centre characteristics were studied by hierarchical logistic regression. Centre effects were assessed by centre-level residual variance. A descriptive survey was performed to investigate differences in the centres' practices, and linear regression was used to confirm findings of different HLA compatibility requirements between centres. The study included 556 patients treated at 54 centres; 450 (80.9%) received transplants in the year after their listing. HLA group scarcity, time of inactive status during the year, pre-emptive listing and listing after age 18 were associated with lower probabilities of transplantation. Patient characteristics explained most of the variability among centres, but patients treated in paediatric centres had a lower probability of transplantation within 1 year because of higher HLA compatibility requirements for transplants. Although patient characteristics explained most of the inter-centre variability, harmonization of some practices might enable us to reduce some inequalities in access to renal transplantation while maintaining optimal transplant survival and chances to get a second transplant when needed. © The Author 2014. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.

Fiber for the treatment of hemorrhoids complications: a systematic review and meta-analysis.

PubMed

Alonso-Coello, Pablo; Mills, Ed; Heels-Ansdell, Diane; López-Yarto, Maite; Zhou, Qi; Johanson, John F; Guyatt, Gordon

2006-01-01

To evaluate the impact of laxatives on a wide range of symptoms in patients with symptomatic hemorrhoids. We searched using the following sources: MEDLINE, EMBASE, CINAHL and CENTRAL, BIOSIS, AMED, Papers First and Proceedings; study authors, industry, and experts in the field. We included all published and unpublished parallel group randomized controlled trials comparing any type of laxative to placebo or no therapy in patients with symptomatic hemorrhoids. Two reviewers independently screened studies for inclusion, retrieved all potentially relevant studies, and extracted data on study population, intervention, prespecified outcomes, and methodology. Seven trials randomized 378 patients to fiber or a nonfiber control. Studies were of moderate quality for most outcomes. Meta-analyses using random effects models suggested that fiber has an apparent beneficial effect. The risk of not improving/persisting symptoms decreased by 47% in the fiber group (RR = 0.53, 95% CI 0.38-0.73) and the risk of bleeding by 50% (RR = 0.50, 95% CI 0.28-0.89). Studies with multiple follow-ups, usually at 6 wk and at 3 months, showed consistent results over time. Results are also compatible with large treatment effects in prolapse, pain, and itching, but even in the pooled analyses confidence intervals were wide and compatible with no effect (RR = 0.79, 95% CI 0.37-1.67; RR = 0.33, 95% CI 0.07-1.65; and RR = 0.71, 95% CI 0.24-2.10, respectively). One study suggested a decrease in recurrence. Results showed a nonsignificant trend toward increases in mild adverse events in the fiber group (RR = 6.0, 95% CI 0.57-64.8). Trials of fiber show a consistent beneficial effect for symptoms and bleeding in the treatment of symptomatic hemorrhoids.

Plant-like mating in an animal: sexual compatibility and allocation trade-offs in a simultaneous hermaphrodite with remote transfer of sperm.

PubMed

Pemberton, A J; Sommerfeldt, A D; Wood, C A; Flint, H C; Noble, L R; Clarke, K R; Bishop, J D D

2004-05-01

The importance of sexual compatibility between mates has only recently been realized in zoological research into sexual selection, yet its study has been central to botanical research for many decades. The reproductive characteristics of remote mating, an absence of precopulatory mate screening, internal fertilization and embryonic brooding are shared between passively pollinated plants and a phylogenetically diverse group of sessile aquatic invertebrates. Here, we further characterize the sexual compatibility system of one such invertebrate, the colonial ascidian Diplosoma listerianum. All 66 reciprocal pairings of 12 genetic individuals were carried out. Fecundities of crosses varied widely and suggested a continuous scale of sexual compatibility. Of the 11 animals from the same population c. 40% of crosses were completely incompatible with a further c. 20% having obvious partial compatibility (reduced fecundity). We are unaware of other studies documenting such high levels of sexual incompatibility in unrelated individuals. RAPD fingerprinting was used to estimate relatedness among the 12 individuals after a known pedigree was successfully reconstructed to validate the technique. In contrast to previous results, no correlation between genetic similarity and sexual compatibility was detected. The blocking of many genotypes of sperm is expected to severely modify realized paternity away from 'fair raffle' expectations and probably reduce levels of intra-brood genetic diversity in this obligatorily promiscuous mating system. One adaptive benefit may be to reduce the bombardment of the female reproductive system by outcrossed sperm with conflicting evolutionary interests, so as to maintain female control of somatic : gametic investment.

Examination of the Compatibility of the Questions Used by Social Studies Teachers in the Class with the Program Achievements According to the SOLO Taxonomy

ERIC Educational Resources Information Center

Keskin, Yusuf; Keskin, Sevgi C.; Kirtel, Aysegül

2016-01-01

The purpose of this study is to examine the compatibility of the questions used by the social studies branch teachers in the level of 6th and 7th grade with the achievements included in the teaching program. Structure of observed learning outcome (SOLO) taxonomy, which was presented by Biggs and Colis (1982) as an alternative to Bloom's cognitive…

The transcriptional regulator, CosR, controls compatible solute biosynthesis and transport, motility and biofilm formation in Vibrio cholerae.

PubMed

Shikuma, Nicholas J; Davis, Kimberly R; Fong, Jiunn N C; Yildiz, Fitnat H

2013-05-01

Vibrio cholerae inhabits aquatic environments and colonizes the human digestive tract to cause the disease cholera. In these environments, V. cholerae copes with fluctuations in salinity and osmolarity by producing and transporting small, organic, highly soluble molecules called compatible solutes, which counteract extracellular osmotic pressure. Currently, it is unclear how V. cholerae regulates the expression of genes important for the biosynthesis or transport of compatible solutes in response to changing salinity or osmolarity conditions. Through a genome-wide transcriptional analysis of the salinity response of V. cholerae, we identified a transcriptional regulator we name CosR for compatible solute regulator. The expression of cosR is regulated by ionic strength and not osmolarity. A transcriptome analysis of a ΔcosR mutant revealed that CosR represses genes involved in ectoine biosynthesis and compatible solute transport in a salinity-dependent manner. When grown in salinities similar to estuarine environments, CosR activates biofilm formation and represses motility independently of its function as an ectoine regulator. This is the first study to characterize a compatible solute regulator in V. cholerae and couples the regulation of osmotic tolerance with biofilm formation and motility. © 2012 Society for Applied Microbiology and Blackwell Publishing Ltd.

The imitation game: Effects of social cues on 'imitation' are domain-general in nature.

PubMed

Marsh, Lauren E; Bird, Geoffrey; Catmur, Caroline

2016-10-01

Imitation has been hailed as 'social glue', facilitating rapport with others. Previous studies suggest that social cues modulate imitation but the mechanism of such modulation remains underspecified. Here we examine the locus, specificity, and neural basis of the social control of imitation. Social cues (group membership and eye gaze) were manipulated during an imitation task in which imitative and spatial compatibility could be measured independently. Participants were faster to perform compatible compared to incompatible movements in both spatial and imitative domains. However, only spatial compatibility was modulated by social cues: an interaction between group membership and eye gaze revealed more spatial compatibility for ingroup members with direct gaze and outgroup members with averted gaze. The fMRI data were consistent with this finding. Regions associated with the control of imitative responding (temporoparietal junction, inferior frontal gyrus) were more active during imitatively incompatible compared to imitatively compatible trials. However, this activity was not modulated by social cues. On the contrary, an interaction between group, gaze and spatial compatibility was found in the dorsolateral prefrontal cortex in a pattern consistent with reaction times. This region may be exerting control over the motor system to modulate response inhibition. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Effect of end segment on physicochemical properties and platelet compatibility of poly(propylene glycol)-initiated poly(methyl methacrylate).

PubMed

Fukuda, Chihiro; Yahata, Chie; Kinoshita, Takuya; Watanabe, Takafumi; Tsukamoto, Hideo; Mochizuki, Akira

2017-10-01

It is well known that polyether-based copolymers have good blood compatibility, although many mechanisms have been proposed to explain their favorable performance. Our objective in carrying out the present study was to obtain a better understanding of the effect of the (poly)ether segment on blood compatibility. Therefore, we synthesized poly(propylene glycol) (PPG)-based initiators for atom transfer polymerization, where the number of propylene glycol (PG) units in the PPG (Pn(PG) was varied from 1 to 94. Methyl methacrylate (MMA) was polymerized using the initiators, resulting in the formation of polyMMAs with a PG-based ether part at the polymer terminal. We mainly investigated the effects of Pn(PG) on the surface properties and platelet compatibility of the PPG-polyMMA. X-ray photoelectron spectroscopy and surface contact angle (CA) analysis revealed the exposure of the PG units at the surface of the polymer. The platelet compatibility of the polymers was improved compared with a commercial polyMMA, even when Pn(PG) = 1. These results suggest that PG units have an important influence on favorable blood compatibility, regardless of the Pn(PG) value. We also investigated protein adsorption behavior in terms of the amount and deformation of fibrinogen adsorbed on the polymer surface.

Zwitterionic polymer functionalization of polysulfone membrane with improved antifouling property and blood compatibility by combination of ATRP and click chemistry.

PubMed

Xiang, Tao; Lu, Ting; Xie, Yi; Zhao, Wei-Feng; Sun, Shu-Dong; Zhao, Chang-Sheng

2016-08-01

The chemical compositions are very important for designing blood-contacting membranes with good antifouling property and blood compatibility. In this study, we propose a method combining ATRP and click chemistry to introduce zwitterionic polymer of poly(sulfobetaine methacrylate) (PSBMA), negatively charged polymers of poly(sodium methacrylate) (PNaMAA) and/or poly(sodium p-styrene sulfonate) (PNaSS), to improve the antifouling property and blood compatibility of polysulfone (PSf) membranes. Attenuated total reflectance-Fourier transform infrared spectra, X-ray photoelectron spectroscopy and water contact angle results confirmed the successful grafting of the functional polymers. The antifouling property and blood compatibility of the modified membranes were systematically investigated. The zwitterionic polymer (PSBMA) grafted membranes showed good resistance to protein adsorption and bacterial adhesion; the negatively charged polymer (PNaSS or PNaMAA) grafted membranes showed improved blood compatibility, especially the anticoagulant property. Moreover, the PSBMA/PNaMAA modified membrane showed both antifouling property and anticoagulant property, and exhibited a synergistic effect in inhibiting blood coagulation. The functionalization of membrane surfaces by a combination of ATRP and click chemistry is demonstrated as an effective route to improve the antifouling property and blood compatibility of membranes in blood-contact. Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Operation Compatibility: A Neglected Contribution to Dual-Task Costs

ERIC Educational Resources Information Center

Pannebakker, Merel M.; Band, Guido P. H.; Ridderinkhof, K. Richard

2009-01-01

Traditionally, dual-task interference has been attributed to the consequences of task load exceeding capacity limitations. However, the current study demonstrates that in addition to task load, the mutual compatibility of the concurrent processes modulates whether 2 tasks can be performed in parallel. In 2 psychological refractory period…

78 FR 30385 - Approval of Noise Compatibility Program for Tweed-New Haven Regional Airport

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-22

... use of flight procedures can be implemented within the period covered by the program without... maps, descriptions, and other documentation produced during the noise compatibility planning study... 180 days (other than the use of new flight procedures for noise control). Failure to approve or...

Image quality associated with the use of an MR-compatible incubator in neonatal neuroimaging.

PubMed

O'Regan, K; Filan, P; Pandit, N; Maher, M; Fanning, N

2012-04-01

MRI in the neonate poses significant challenges associated with patient transport and monitoring, and the potential for diminished image quality owing to patient motion. The objective of this study was to evaluate the usefulness of a dedicated MR-compatible incubator with integrated radiofrequency coils in improving image quality of MRI studies of the brain acquired in term and preterm neonates using standard MRI equipment. Subjective and objective analyses of image quality of neonatal brain MR examinations were performed before and after the introduction of an MR-compatible incubator. For all studies, the signal-to-noise ratio (SNR) was calculated, image quality was graded (1-3) and each was assessed for image artefact (e.g. motion). Student's t-test and the Mann-Whitney U-test were used to compare mean SNR values. 39 patients were included [mean gestational age 39 weeks (range 30-42 weeks); mean postnatal age 13 days (range 1-56 days); mean weight 3.5 kg (range 1.4-4.5 kg)]. Following the introduction of the MR-compatible incubator, diagnostic quality scans increased from 50 to 89% and motion artefact decreased from 73 to 44% of studies. SNR did not increase initially, but, when using MR sequences and parameters specifically tailored for neonatal brain imaging, SNR increased from 70 to 213 (p=0.001). Use of an MR-compatible incubator in neonatal neuroimaging provides a safe environment for MRI of the neonate and also facilitates patient monitoring and transport. When specifically tailored MR protocols are used, this results in improved image quality.

Diffusion tensor and volumetric magnetic resonance imaging using an MR-compatible hand-induced robotic device suggests training-induced neuroplasticity in patients with chronic stroke

PubMed Central

LAZARIDOU, ASIMINA; ASTRAKAS, LOUKAS; MINTZOPOULOS, DIONYSSIOS; KHANICHEH, AZADEH; SINGHAL, ANEESH B.; MOSKOWITZ, MICHAEL A.; ROSEN, BRUCE; TZIKA, ARIA A.

2013-01-01

Stroke is the third leading cause of mortality and a frequent cause of long-term adult impairment. Improved strategies to enhance motor function in individuals with chronic disability from stroke are thus required. Post-stroke therapy may improve rehabilitation and reduce long-term disability; however, objective methods for evaluating the specific impact of rehabilitation are rare. Brain imaging studies on patients with chronic stroke have shown evidence for reorganization of areas showing functional plasticity after a stroke. In this study, we hypothesized that brain mapping using a novel magnetic resonance (MR)-compatible hand device in conjunction with state-of-the-art magnetic resonance imaging (MRI) can serve as a novel biomarker for brain plasticity induced by rehabilitative motor training in patients with chronic stroke. This hypothesis is based on the premises that robotic devices, by stimulating brain plasticity, can assist in restoring movement compromised by stroke-induced pathological changes in the brain and that these changes can then be monitored by advanced MRI. We serially examined 15 healthy controls and 4 patients with chronic stroke. We employed a combination of diffusion tensor imaging (DTI) and volumetric MRI using a 3-tesla (3T) MRI system using a 12-channel Siemens Tim coil and a novel MR-compatible hand-induced robotic device. DTI data revealed that the number of fibers and the average tract length significantly increased after 8 weeks of hand training by 110% and 64%, respectively (p<0.001). New corticospinal tract (CST) fibers projecting progressively closer to the motor cortex appeared during training. Volumetric data analysis showed a statistically significant increase in the cortical thickness of the ventral postcentral gyrus areas of patients after training relative to pre-training cortical thickness (p<0.001). We suggest that rehabilitation is possible for a longer period of time after stroke than previously thought, showing that structural plasticity is possible even after 6 months due to retained neuroplasticity. Our study is an example of personalized medicine using advanced neuroimaging methods in conjunction with robotics in the molecular medicine era. PMID:23982596

Engineering principles to assure compatible docking between future spacecraft of USA and USSR

NASA Technical Reports Server (NTRS)

Johnson, C. C.

1975-01-01

Working jointly the USA and the USSR have selected an androgynous, peripheral type docking mechanism concept. The mechanical principles inherent to the concept, the rationale supporting its selection, and the probable nature of future designs stemming from the concept, are described. Operational situations just prior to docking, impact conditions, energy absorption, and the structural joining of the spacecraft, are specified. Docking procedures for the Apollo-Soyuz missions are discussed.

Impact of New DoD Directives on Marine Corps Acquisition Policy at Milestone IV

DTIC Science & Technology

1991-03-01

Logistics Services Center (DLSC) files are compatible on the Effective Transfer Data Base. The Hardware Systems Command ( HSC ) develops a uniform stock...financial evaluation. Based on established review dates, the HSC publishes the location and time of the stock transfer review meeting. Forty-five days...letter to NAVSUP. The HSC also maintains adequate documentation to justify material that they retain and ensures that items designated for retention at the

Fuels Performance: Navigating the Intersection of Fuels and Combustion (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2014-12-01

Researchers at the National Renewable Energy Laboratory (NREL), the only national laboratory dedicated 100% to renewable energy and energy efficiency, recognize that engine and infrastructure compatibility can make or break the impact of even the most promising fuel. NREL and its industry partners navigate the intersection of fuel chemistry, ignition kinetics, combustion, and emissions, with innovative approaches to engines and fuels that meet drivers' expectations, while minimizing petroleum use and GHGs.

New Early Jurassic Tetrapod Assemblages Constrain Triassic-Jurassic Tetrapod Extinction Event

NASA Astrophysics Data System (ADS)

Olsen, P. E.; Shubin, N. H.; Anders, M. H.

1987-08-01

The discovery of the first definitively correlated earliest Jurassic (200 million years before present) tetrapod assemblage (Fundy basin, Newark Supergroup, Nova Scotia) allows reevaluation of the duration of the Triassic-Jurassic tetrapod extinction event. Present are tritheledont and mammal-like reptiles, prosauropod, theropod, and ornithischian dinosaurs, protosuchian and sphenosuchian crocodylomorphs, sphenodontids, and hybodont, semionotid, and palaeonisciform fishes. All of the families are known from Late Triassic and Jurassic strata from elsewhere; however, pollen and spore, radiometric, and geochemical correlation indicate an early Hettangian age for these assemblages. Because all ``typical Triassic'' forms are absent from these assemblages, most Triassic-Jurassic tetrapod extinctions occurred before this time and without the introduction of new families. As was previously suggested by studies of marine invertebrates, this pattern is consistent with a global extinction event at the Triassic-Jurassic boundary. The Manicouagan impact structure of Quebec provides dates broadly compatible with the Triassic-Jurassic boundary and, following the impact theory of mass extinctions, may be implicated in the cause.

Terrazzo floor from the Jewish Historical Institute in Warsaw - mineralogical characterization, conservation and impact of fire

NASA Astrophysics Data System (ADS)

Bartz, Wojciech; Martusewicz, Jacek

2017-12-01

Samples of historical terrazzo floor from the Jewish Historical Institute in Warsaw, dated back to the thirties of the twentieth century, have been analysed. Investigations by polarised optical microscopy, scanning microscopy, powder X-ray diffraction and simultaneous thermal analysis were preformed. Based on the results obtained, it was concluded that terrazzo tiles were prepared on the basis of ordinary Portland cement and aggregate, dominated with crushed stone (marble, serpentinite, limestone and marl), accompanied by sparse quartz sand grains. The binding mass was colourised with the use of pigments containing iron ions. The occurrence of altered serpentinite and marble grains, the latter clouded and partly replaced with micrite, the presence of portlandite, indicate the terrazzo tiles were subjected to thermal impact. This is related to the fire that took place at the beginning of World War II. Based on this study, repair mortars were formulated, on one hand compatible with the authentic ones, on the other retaining traces of fire.

The Greeks in the West: genetic signatures of the Hellenic colonisation in southern Italy and Sicily

PubMed Central

Tofanelli, Sergio; Brisighelli, Francesca; Anagnostou, Paolo; Busby, George B J; Ferri, Gianmarco; Thomas, Mark G; Taglioli, Luca; Rudan, Igor; Zemunik, Tatijana; Hayward, Caroline; Bolnick, Deborah; Romano, Valentino; Cali, Francesco; Luiselli, Donata; Shepherd, Gillian B; Tusa, Sebastiano; Facella, Antonino; Capelli, Cristian

2016-01-01

Greek colonisation of South Italy and Sicily (Magna Graecia) was a defining event in European cultural history, although the demographic processes and genetic impacts involved have not been systematically investigated. Here, we combine high-resolution surveys of the variability at the uni-parentally inherited Y chromosome and mitochondrial DNA in selected samples of putative source and recipient populations with forward-in-time simulations of alternative demographic models to detect signatures of that impact. Using a subset of haplotypes chosen to represent historical sources, we recover a clear signature of Greek ancestry in East Sicily compatible with the settlement from Euboea during the Archaic Period (eighth to fifth century BCE). We inferred moderate sex-bias in the numbers of individuals involved in the colonisation: a few thousand breeding men and a few hundred breeding women were the estimated number of migrants. Last, we demonstrate that studies aimed at quantifying Hellenic genetic flow by the proportion of specific lineages surviving in present-day populations may be misleading. PMID:26173964

Irradiation grafting of natural rubber latex with maleic anhydride and its compatibilization of poly(lactic acid)/natural rubber blends

NASA Astrophysics Data System (ADS)

Pongsathit, Siriwan; Pattamaprom, Cattaleeya

2018-03-01

Maleic anhydride (MA) is an interesting monomer to be grafted onto natural rubber(NR) due to its potential as a compatibilizer of hydrophobic rubbers and polymers with higher polarity. So far, radiation grafting of MA onto NR in latex state has not been reported. In this study, the grafting of NR with MA in latex state was investigated by exposing the latex to cobalt-60 gamma irradiation at a fixed MA content of 9% and a varied absorbed doses from 2 to 10 kGy. The FTIR spectrometer, 1H NMR spectrometer and gel content analysis have confirmed successful grafting of MA onto NR after irradiation. The grafted NRs were then used to increase the compatibility and the impact property of PLA/NR blends. It was found that the highest impact strength of the blends was achieved when the grafting was carried out at the absorbed dose of 4 kGy.

Impact of human emotions on physiological characteristics

NASA Astrophysics Data System (ADS)

Partila, P.; Voznak, M.; Peterek, T.; Penhaker, M.; Novak, V.; Tovarek, J.; Mehic, Miralem; Vojtech, L.

2014-05-01

Emotional states of humans and their impact on physiological and neurological characteristics are discussed in this paper. This problem is the goal of many teams who have dealt with this topic. Nowadays, it is necessary to increase the accuracy of methods for obtaining information about correlations between emotional state and physiological changes. To be able to record these changes, we focused on two majority emotional states. Studied subjects were psychologically stimulated to neutral - calm and then to the stress state. Electrocardiography, Electroencephalography and blood pressure represented neurological and physiological samples that were collected during patient's stimulated conditions. Speech activity was recording during the patient was reading selected text. Feature extraction was calculated by speech processing operations. Classifier based on Gaussian Mixture Model was trained and tested using Mel-Frequency Cepstral Coefficients extracted from the patient's speech. All measurements were performed in a chamber with electromagnetic compatibility. The article discusses a method for determining the influence of stress emotional state on the human and his physiological and neurological changes.

Effects of ethylene oxide sterilization on 82: 18 PLLA/PGA copolymer craniofacial fixation plates.

PubMed

Pietrzak, William S

2010-01-01

Bioabsorbable devices are generally susceptible to some form of degradation or alteration of material properties in response to exposure to the terminal sterilization cycle. In addition to affecting the material strength, sterilization can also increase the rate of hydrolysis, both of which can impact clinical performance. The impact of sterilization on the material/device is unpredictable and must be empirically determined. This study examined the effects of ethylene oxide treatment on the material properties of LactoSorb 82:18 poly(L-lactic acid)-poly(glycolic acid) craniofacial plates. Compared with untreated control plates, there was no effect on the initial inherent viscosity (1.3 dL/g), the glass transition temperature (58 degrees C), or on the flexural mechanical properties. Furthermore, there was no effect on the in vitro rate of hydrolysis and mechanical strength loss profile. This provides evidence that the ethylene oxide sterilization cycle is compatible with these copolymer plates and that such treatment should not affect the clinical performance.

Differentiating sepsis from non-infectious systemic inflammation based on microvesicle-bacteria aggregation

NASA Astrophysics Data System (ADS)

Herrmann, I. K.; Bertazzo, S.; O'Callaghan, D. J. P.; Schlegel, A. A.; Kallepitis, C.; Antcliffe, D. B.; Gordon, A. C.; Stevens, M. M.

2015-08-01

Sepsis is a severe medical condition and a leading cause of hospital mortality. Prompt diagnosis and early treatment has a significant, positive impact on patient outcome. However, sepsis is not always easy to diagnose, especially in critically ill patients. Here, we present a conceptionally new approach for the rapid diagnostic differentiation of sepsis from non-septic intensive care unit patients. Using advanced microscopy and spectroscopy techniques, we measure infection-specific changes in the activity of nano-sized cell-derived microvesicles to bind bacteria. We report on the use of a point-of-care-compatible microfluidic chip to measure microvesicle-bacteria aggregation and demonstrate rapid (<=1.5 hour) and reliable diagnostic differentiation of bacterial infection from non-infectious inflammation in a double-blind pilot study. Our study demonstrates the potential of microvesicle activities for sepsis diagnosis and introduces microvesicle-bacteria aggregation as a potentially useful parameter for making early clinical management decisions.Sepsis is a severe medical condition and a leading cause of hospital mortality. Prompt diagnosis and early treatment has a significant, positive impact on patient outcome. However, sepsis is not always easy to diagnose, especially in critically ill patients. Here, we present a conceptionally new approach for the rapid diagnostic differentiation of sepsis from non-septic intensive care unit patients. Using advanced microscopy and spectroscopy techniques, we measure infection-specific changes in the activity of nano-sized cell-derived microvesicles to bind bacteria. We report on the use of a point-of-care-compatible microfluidic chip to measure microvesicle-bacteria aggregation and demonstrate rapid (<=1.5 hour) and reliable diagnostic differentiation of bacterial infection from non-infectious inflammation in a double-blind pilot study. Our study demonstrates the potential of microvesicle activities for sepsis diagnosis and introduces microvesicle-bacteria aggregation as a potentially useful parameter for making early clinical management decisions. Electronic supplementary information (ESI) available: Fig. S1: Markers of inflammation and microvesicle characteristics in patient plasma samples, Fig. S2: Experimental sepsis model, Table S1: Patient characteristics. Table S2: Inclusion/exclusion criteria. See DOI: 10.1039/c5nr01851j

Effects of KMnO4 Treatment on the Flexural, Impact, and Thermal Properties of Sugar Palm Fiber-Reinforced Thermoplastic Polyurethane Composites

NASA Astrophysics Data System (ADS)

Mohammed, A. A.; Bachtiar, D.; Rejab, M. R. M.; Jiang, X. X.; Abas, Falak O.; Abass, Raghad U.; Hasany, S. F.; Siregar, Januar P.

2018-05-01

Global warming has had a great impact on environmental changes since the last decade. Eco-friendly industrial products are of great importance to sustain life on earth, including using natural composites. Natural fibers used as fillers are also environmentally valuable because of their biodegradable nature. However, compatibility issues between the fiber and its respective matrix is a major concern. The present work focused on the study of the flexural, impact, and thermal behaviors of environmentally friendly sugar palm fibers (SPF) incorporated into a composite with thermoplastic polyurethane (TPU). Two techniques (extrusion and compression molding) were used to prepare these composites. The fiber size and dosage were kept constant at 250 µm and 30 wt.% SPF, respectively. The effects of potassium permanganate (KMnO4) treatment on the flexural, impact, and thermal behaviors of the treated SPF with 6% NaOH-reinforced TPU composites were investigated. Three different concentrations of KMnO4 (0.033%, 0.066%, and 0.125%) were studied for this purpose. The characterization of the flexural and impact properties of the new TPU/SPF composites was studied as per American Society for Testing Materials ASTM standards. Thermogravimetric analysis was employed for thermal behavior analysis of the TPU/SPF composites. The best flexural strength, impact strength, and modulus properties (8.118 MPa, 55.185 kJ/m2, and 262.102 MPa, respectively) were obtained with a 0.033% KMnO4-treated sample. However, all flexural strength, impact strength, and modulus properties for the KMnO4-treated samples were lower than the sample treated only with 6% NaOH. The highest thermal stability was also shown by the sample treated with 0.033% KMnO4. Therefore, this method enhanced the thermal properties of the TPU/SPF composites with clear deterioration of the flexural and impact properties.

A Tol2 Gateway-Compatible Toolbox for the Study of the Nervous System and Neurodegenerative Disease.

PubMed

Don, Emily K; Formella, Isabel; Badrock, Andrew P; Hall, Thomas E; Morsch, Marco; Hortle, Elinor; Hogan, Alison; Chow, Sharron; Gwee, Serene S L; Stoddart, Jack J; Nicholson, Garth; Chung, Roger; Cole, Nicholas J

2017-02-01

Currently there is a lack in fundamental understanding of disease progression of most neurodegenerative diseases, and, therefore, treatments and preventative measures are limited. Consequently, there is a great need for adaptable, yet robust model systems to both investigate elementary disease mechanisms and discover effective therapeutics. We have generated a Tol2 Gateway-compatible toolbox to study neurodegenerative disorders in zebrafish, which includes promoters for astrocytes, microglia and motor neurons, multiple fluorophores, and compatibility for the introduction of genes of interest or disease-linked genes. This toolbox will advance the rapid and flexible generation of zebrafish models to discover the biology of the nervous system and the disease processes that lead to neurodegeneration.

Coach/player relationships in tennis.

PubMed

Prapavessis, H; Gordon, S

1991-09-01

The present study examined the variables that predict coach/athlete compatibility. Compatibility among a sample of 52 elite tennis coach/player dyads was assessed using a sport adapted version of Schutz's (1966) Fundamental Interpersonal Relations Orientation-Behaviour (FIRO-B), a sport adapted version of Fiedler's (1967) Least Preferred Co-worker scale (LPC), and Chelladurai and Saleh's (1980) Leadership Scale for Sport (LSS). Self-ratings of the quality of the interaction were obtained from both coach and athlete. Multiple-regression analyses using self-rating scores as the dependent measure were carried out to determine which variables best predicted the degree of compatibility. The sole inventory that significantly predicted compatibility was the LSS. More specifically, the discrepancy between the athlete's preferences and perceptions on the autocratic dimension was the best predictor. Implications for tennis coaches and recommendations for future research in this area are discussed.

Improvement of toughness and water resistance of bioplastic based on wheat gluten using epoxidized natural rubber

NASA Astrophysics Data System (ADS)

Hemsri, S.; Thongpin, C.; Somkid, P.; Sae-arma, S.; Paiykaew, A.

2015-07-01

Novel blends based on wheat gluten (WG) and epoxidized natural rubber (ENR) were fabricated with different ENR contents of 10, 20 and 30 wt% in an internal mixer. Sulfur vulcanization was used to crosslink the ENR phase in the blends. Comparatively, blends of WG and natural rubber (WG/NR) were prepared in the same condition as the WG/ENR blends. Tensile mechanical properties and impact strength of the WG/ENR blends were investigated and compared with the WG/NR blends as well as pure WG. Moreover, water absorption of pure WG and the WG/ENR blends was also tested. As investigated by scanning electron microscopy (SEM), the results revealed more compatibility between WG and ENR compared with NR. The elongation at break, impact strength and water resistance of the WG/ENR blends were found to remarkably increase with respect to the pure WG. Thus, incorporation of ENR into WG could improve toughness and water resistance of WG. Furthermore, the effect of adding glycerol acting as a plasticizer on the mechanical properties and impact strength of the WG/ENR blends was also studied. The blends with glycerol-plasticized WG (WG-Gly/ENR) showed more homogeneous morphologies and superior results in the mechanical properties and impact strength compared with the WG/ENR blends.

Effect of pressing temperature on the mechanical properties of waste styrofoam filled sawdust composite

NASA Astrophysics Data System (ADS)

Nasution, H.; Harahap, H.; Riani, R.; Pelawi, A. I.

2018-02-01

This study has investigated the effect of pressing temperature on mechanical properties of waste styrofoam composite filled with sawdust. The waste styrofoam as the matrix was mixed with sawdust as filler and maleic anhydride (6%wt) as a compatibilizer. The weight fraction ratio between matrix and filler 70:30 (wt) and wood fiber size of 100 mesh were conducted. The pressing temperatures were investigated using a hot press with temperatures varied viz. 120, 130, 150, and 170 °C. Surface modification was applied to sawdust to diminish its polarity so that it could be compatible with the non-polar waste styrofoam matrix. Composites were evaluated using Instron and impact tester machine to investigate the tensile strength and impact strength of the material, respectively. The result indicated that tensile strength has decreased with the increase of pressing temperature where the largest tensile strength is at 130 °C of 33 MPa. The same trend has occurred on impact strength, where the value has reached of 300 J/cm2 on pressing temperature of 130 °C. From scanning electron microscopy (SEM) analysis it is also confirmed that during impact test, the resistance of the composite which has been pressed at the temperature of 130 °C have given better morphology than the composite at 170 °C.

Synthetic pesticides in agro-ecosystems: are they as detrimental to nontarget invertebrate fauna as we suspect?

PubMed

Jenkins, Sommer; Hoffmann, Ary A; Mccoll, Stuart; Tsitsilas, Angelos; Umina, Paul A

2013-04-01

Broad-spectrum pesticides used to protect field crops and pastures from invertebrate pests are frequently reported to reduce populations of nontarget fauna, but there is often little relevant field data. Nonetheless, this notion is used to promote the adoption of more selective pesticides with less impact on nontarget invertebrates, including beneficial insects. Selective pesticides are not widely available for broad-acre grain crops and pastures in southern Australia; however, several options available in other industries could be compatible with these agricultural systems. In this study, the impact of broad-spectrum pesticides and several selective pesticides on nontarget invertebrate fauna was assessed in five field trials in wheat and canola fields. Despite extensive sampling over short and medium timeframes, few treatment effects on nontarget groups were detected. In cases where broad-spectrum pesticides were detrimental, patterns were often inconsistent among nontarget groups and between field trials. In contrast, the pest species, Halotydeus destructor Tucker and Penthaleus spp., were effectively controlled by the broad-spectrum treatments and less effectively by the selective pesticides. The inconsistent and relatively small impact of broad-spectrum pesticides on some nontarget invertebrates demonstrates that caution is required when extrapolating from laboratory-based assessments routinely used to assess the impacts of pesticides to field conditions in agriculture.

49 CFR 173.52 - Classification codes and compatibility groups of explosives.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false Classification codes and compatibility groups of... Class 1 § 173.52 Classification codes and compatibility groups of explosives. (a) The classification..., consists of the division number followed by the compatibility group letter. Compatibility group letters are...

Blood compatibility--a perspective.

PubMed

Ratner, B D

2000-01-01

This perspective on blood- materials interactions is intended to introduce the set of papers stemming from the symposium, "Devices and Diagnostics in Contact with Blood: Issues in Blood Compatibility at the Close of the 20th Century," organized on August 4-6, 1999 at the University of Washington by the University of Washington Engineered Biomaterials (UWEB) Engineering Research Center. This article outlines some of the history of blood contacting materials, overviews the work that has originated at the University of Washington over the past 28 years, speculates on the origins of the controversies on blood compatibility and considers the issues that should be addressed in future studies.

A study of the applicability/compatibility of inertial energy storage systems to future space missions

NASA Technical Reports Server (NTRS)

Weldon, W. F.

1980-01-01

The applicability/compatibility of inertial energy storage systems like the homopolar generator (HPG) and the compensated pulsed alternator (CPA) to future space missions is explored. Areas of CPA and HPG design requiring development for space applications are identified. The manner in which acceptance parameters of the CPA and HPG scale with operating parameters of the machines are explored and the types of electrical loads which are compatible with the CPA and HPG are examined. Potential applications including the magnetoplasmadynamic (MPD) thruster, pulsed data transmission, laser ranging, welding and electromagnetic space launch are discussed.

Classical r-matrices for the generalised Chern–Simons formulation of 3d gravity

NASA Astrophysics Data System (ADS)

Osei, Prince K.; Schroers, Bernd J.

2018-04-01

We study the conditions for classical r-matrices to be compatible with the generalised Chern–Simons action for 3d gravity. Compatibility means solving the classical Yang–Baxter equations with a prescribed symmetric part for each of the real Lie algebras and bilinear pairings arising in the generalised Chern–Simons action. We give a new construction of r-matrices via a generalised complexification and derive a non-linear set of matrix equations determining the most general compatible r-matrix. We exhibit new families of solutions and show that they contain some known r-matrices for special parameter values.

Distinct Osmoadaptation Strategies in the Strict Halophilic and Halotolerant Bacteria Isolated from Lunsu Salt Water Body of North West Himalayas.

PubMed

Vaidya, Shivani; Dev, Kamal; Sourirajan, Anuradha

2018-07-01

Two strict halophilic bacterial strains, Halobacillus trueperi SS1, and Halobacillus trueperi SS3, and three halotolerant bacterial strains, Shewanella algae SS2, Halomonas venusta SS5, and Marinomonas sp. SS8 of Lunsu salt water body, Himachal Pradesh, India, were selected to study the mechanism of salt tolerance and the role of osmolytes therein. A combination of flame photometry, chromatographic and colorimetric assays was used to study the mechanism of salt tolerance in the selected strict halophilic and halotolerant bacterial strains. The strict halophiles and, one of the halotolerants, Marinomonas sp. SS8 were found to utilize both "salt-in strategy" and "accumulation of compatible solutes strategy" for osmoregulation in hypersaline conditions. On the contrary, the remaining two halotolerants used "accumulation of compatible solutes strategy" under saline stress and not the "salt-in strategy". The present study suggests towards distinct mechanisms of salt tolerance in the two classes, wherein strict halophiles accumulate compatible solutes as well as adopt salt-in strategy, while the halotolerant bacteria accumulate a range of compatible solutes, except Marinomonas sp. SS8, which utilizes both the strategies to combat salt stress.

China’s Muslims: Separatism and Prospects for Ethnic Peace

DTIC Science & Technology

2006-09-01

Management and Budget, Paperwork Reduction Project (0704-0188) Washington DC 20503. 1. AGENCY USE ONLY (Leave blank) 2. REPORT DATE September...unlike Uighur ethnic identity, Hui identity stems from and is compatible with the PRC and Chinese society. This study uses primary sources including...and is compatible with the PRC and Chinese society. This study uses primary sources including interviews with Uighurs, Hui and Han Chinese conducted

Comprehensive mutagenesis of HIV-1 protease: a computational geometry approach.

PubMed

Masso, Majid; Vaisman, Iosif I

2003-05-30

A computational geometry technique based on Delaunay tessellation of protein structure, represented by C(alpha) atoms, is used to study effects of single residue mutations on sequence-structure compatibility in HIV-1 protease. Profiles of residue scores derived from the four-body statistical potential are constructed for all 1881 mutants of the HIV-1 protease monomer and compared with the profile of the wild-type protein. The profiles for an isolated monomer of HIV-1 protease and the identical monomer in a dimeric state with an inhibitor are analyzed to elucidate changes to structural stability. Protease residues shown to undergo the greatest impact are those forming the dimer interface and flap region, as well as those known to be involved in inhibitor binding.

Let the sunshine in? The effects of luminance on economic preferences, choice consistency and dominance violations

PubMed Central

Glimcher, Paul W.

2017-01-01

Weather, in particular the intensity and duration of sunshine (luminance), has been shown to significantly affect financial markets. Yet, because of the complexity of market interactions we do not know how human behavior is affected by luminance in a way that could inform theoretical choice models. In this paper, we use data from a field study using an incentive-compatible, decision task conducted daily over a period of two years and from the US Earth System Research Laboratory luminance sensor to investigate the impact of luminance on risk preferences, ambiguity preferences, choice consistency and dominance violations. We find that luminance levels affect all of these. Age and gender influence the strength of some of these effects. PMID:28783734

A low-energy metal-ion source for primary ion deposition and accelerated ion doping during molecular-beam epitaxy

NASA Astrophysics Data System (ADS)

Hasan, M.-A.; Knall, J.; Barnett, S. A.; Rockett, A.; Sundgren, J.-E.

1987-10-01

A single-grid electron-impact ultrahigh vacuum (UHV) compatible low-energy ion gun capable of operating with a low vapor pressure solid source material such as In is presented. The gun consists of a single chamber which integrates the functions of an effusion cell, a vapor transport tube, and a glow discharge ionizer. The initial results of experiments designed to study the role of ion/surface interactions during nucleation and the early stages of crystal growth in UHV revealed that, for deposition on amorphous substrates, the use of a partially ionized In(+) beam resulted in a progressive shift towards larger island sizes, a decreased rate of secondary nucleation, and a more uniform island size distribution.

Computer program to assess impact of fatigue and fracture criteria on weight and cost of transport aircraft

NASA Technical Reports Server (NTRS)

Tanner, C. J.; Kruse, G. S.; Oman, B. H.

1975-01-01

A preliminary design analysis tool for rapidly performing trade-off studies involving fatigue, fracture, static strength, weight, and cost is presented. Analysis subprograms were developed for fatigue life, crack growth life, and residual strength; and linked to a structural synthesis module which in turn was integrated into a computer program. The part definition module of a cost and weight analysis program was expanded to be compatible with the upgraded structural synthesis capability. The resultant vehicle design and evaluation program is named VDEP-2. It is an accurate and useful tool for estimating purposes at the preliminary design stage of airframe development. A sample case along with an explanation of program applications and input preparation is presented.

Study the Space Debris Impact in the Early Stages of the Nano-Satellite Design

NASA Astrophysics Data System (ADS)

Mahdi, Mohammed Chessab

2016-12-01

The probability of KufaSat collisions with different sizes of orbital debris and with other satellites which operating in the same orbit during orbital lifetime was determined. Apogee/Perigee Altitude History was used to graph apogee and perigee altitudes over KufaSat lifetime. The required change in velocity for maneuvers necessary to reentry atmospheric within 25 years was calculated. The prediction of orbital lifetime of KufaSat using orbital parameters and engineering specifications as inputs to the Debris Assessment Software (DAS) was done, it has been verified that the orbital lifetime will not be more than 25 years after end of mission which is compatible with recommendation of Inter-Agency Space Debris Coordination Committee (IADC).

The Effect of Nonmasking Distractors on the Priming of Motor Responses

ERIC Educational Resources Information Center

Jaskowski, Piotr

2007-01-01

Masked stimuli (primes) can affect the preparation of a motor response to subsequently presented target. In numerous studies, it has been shown that the compatibility effect is biphasic as it develops over time: positive (benefits for compatible trials and costs for incompatible trials) for short prime-target temporal distances and negative…

The Compatibility of Feminist Theology and Gestalt Therapy: A Study of "Practical-Values."

ERIC Educational Resources Information Center

Hinksman, Barrie

2001-01-01

An on-going theoretical issue for pastoral counseling concerns the integration of psychological and theological concepts. The possibility of exploring the compatibility of Gestalt psychotherapy and feminist theology is considered with reference to the 'practical-values' of each, and it is proposed that there is significant common ground between…

Does Felt Gender Compatibility Mediate Influences of Self-Perceived Gender Nonconformity on Early Adolescents' Psychosocial Adjustment?

ERIC Educational Resources Information Center

Menon, Meenakshi

2011-01-01

This study evaluated the hypothesis that self-perceived gender nonconformity is distressing to children because it undermines a confident sense of gender compatibility. Participants were 357 early adolescents (180 boys, M age = 12.68 years) in England who responded to questionnaires measuring friendship styles (preoccupied, avoidant), gender…

Micro-Macro Compatibility: When Does a Complex Systems Approach Strongly Benefit Science Learning?

ERIC Educational Resources Information Center

Samon, Sigal; Levy, Sharona T.

2017-01-01

The study explores how a complexity approach empowers science learning. A complexity approach represents systems as many interacting entities. The construct of micro-macro compatibility is introduced, the degree of similarity between behaviors at the micro- and macro-levels of the system. Seventh-grade students' learning about gases was studied…

[Study on membrane type leaf water evaporation inhibitors for improving effect of preventing diseases and pest controlling of Lycium barbarum].

PubMed

Wang, Dan-Dan; Lv, Zhe; Xu, Chang-Qing; Liu, Sai; Chen, Jun; Peng, Xiao; Wu, Yan

2018-01-01

Through indoor and field comparative experiments, the properties of membrane type leaf evaporation inhibitors and its effects on photosynthesis of Lycium barbarum and compatibility and synergistic of pesticide were studied. The evaporation inhibitors and L. barbarum were chosen to investigate the suppression of water evaporation and the compatibility with pesticides. The effect of evaporation inhibitors on photosynthesis of L. barbarum leaves was determined by the chlorophyll fluorescence imaging system. The results showed that water evaporation of L. barbarum leaves of different leaf age were evidently suppressed after treated with evaporation inhibitor. The inhibitor was well compatible with pesticide and effectively improved the pesticide efficacy，and had no significant effect on chlorophyll fluorescence parameters. It is concluded that the evaporation inhibitor has good compatibility with the pesticide, and has remarkable effect of restraining moisture evaporation, which make it can be used for reducing the dosage and improving the efficacy of the pesticide in the field of L. barbarum. Copyright© by the Chinese Pharmaceutical Association.

Gender compatibility, math-gender stereotypes, and self-concepts in math and physics

NASA Astrophysics Data System (ADS)

Koul, Ravinder; Lerdpornkulrat, Thanita; Poondej, Chanut

2016-12-01

[This paper is part of the Focused Collection on Gender in Physics.] Positive self-assessment of ability in the quantitative domains is considered critical for student participation in science, technology, engineering, and mathematics field studies. The present study investigated associations of gender compatibility (gender typicality and contentedness) and math-gender stereotypes with self-concepts in math and physics. Statistical analysis of survey data was based on a sample of 170 male and female high school science students matched on propensity scores based on age and past GPA scores in math. Results of MANCOVA analyses indicated that the combination of high personal gender compatibility with low endorsement of math-gender stereotypes was associated with low gender differentials in math and physics self-concepts whereas the combination of high personal gender compatibility with high endorsement of math-gender stereotypes was associated with high gender differentials in math and physics self-concepts. These results contribute to the recent theoretical and empirical work on antecedents to the math and physics identities critical to achieving gender equity in STEM fields.

Compatibility art of traditional Chinese medicine: from the perspective of herb pairs.

PubMed

Wang, Shengpeng; Hu, Yangyang; Tan, Wen; Wu, Xu; Chen, Ruie; Cao, Jiliang; Chen, Meiwan; Wang, Yitao

2012-09-28

Over the past decades, research of traditional Chinese medicine (TCM) mainly focused on developing potential candidates from Chinese medicinal herbs, while the wisdom of applying these traditional herbs has not been paid as much attention as it deserves. As is well-known, multi-herb therapy is one of the most important characteristics of TCM, but the modernization drive of this conventional wisdom has faced many obstacles due to its unimaginable complexity. Herb pairs, the most fundamental and the simplest form of multi-herb formulae, are a centralized representative of Chinese herbal compatibility. In light of their simplicity and the basic characteristics of complex formulae, herb pairs are of great importance in the studies of herb compatibility. A systematic search of herb pair related research was carried out using multiple online literature databases, books and monographs published in the past 20 years. A comprehensive introduction to the compatibility of TCM, the position of herb pairs in TCM and the progresses of several famous herb pairs were provided in this review. Furthermore, the clinical study and the future research trends of herb pairs were also discussed. Herb pairs have played, and may continue to play a key role in full investigation of general herb compatibility for their indispensable position in TCM. Much more research is needed for the standardization, safety evaluation, and mechanism exploration of herb pairs. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Study on the blood compatibility and biodegradation properties of magnesium alloys.

PubMed

Mochizuki, Akira; Kaneda, Hideki

2015-02-01

Lately, several magnesium alloys have been investigated as a new class of biomaterials owing to their excellent biodegradability in living tissues. In this study, we considered AZ series of Mg alloy containing aluminum (3% to 9%) and zinc (1%) as a model magnesium alloy, and investigated their biodegradation in whole blood and blood compatibility in vitro. The results of the elution property of metal ions determined using chromogenic assay and the associated pH change show that the degradation resistance of the AZ series alloys in blood is improved by alloying aluminum. Furthermore, the blood compatibility of the alloys was investigated in terms of their hemolysis, factor Xa-like activity, using spectrophotometry and chromogenic assay, respectively, and coagulation time measurements (prothrombin time and activated partial thromboplastin time). The results indicated that the blood compatibility of the AZ series alloys is excellent, irrespective of the alloy composition. The excellent blood compatibility with the coagulation system could be attributed to the eluted Mg(2+) ion, which suppresses the activation of certain coagulation factors in the intrinsic and/or extrinsic coagulation pathways. In terms of the degradation resistance of the AZ series alloys in blood, the results of pH change in blood and the amount of the eluted metal ions indicate that the performance is markedly improved with an increase in aluminum content. Copyright © 2014 Elsevier B.V. All rights reserved.

Visual context modulates potentiation of grasp types during semantic object categorization.

PubMed

Kalénine, Solène; Shapiro, Allison D; Flumini, Andrea; Borghi, Anna M; Buxbaum, Laurel J

2014-06-01

Substantial evidence suggests that conceptual processing of manipulable objects is associated with potentiation of action. Such data have been viewed as evidence that objects are recognized via access to action features. Many objects, however, are associated with multiple actions. For example, a kitchen timer may be clenched with a power grip to move it but pinched with a precision grip to use it. The present study tested the hypothesis that action evocation during conceptual object processing is responsive to the visual scene in which objects are presented. Twenty-five healthy adults were asked to categorize object pictures presented in different naturalistic visual contexts that evoke either move- or use-related actions. Categorization judgments (natural vs. artifact) were performed by executing a move- or use-related action (clench vs. pinch) on a response device, and response times were assessed as a function of contextual congruence. Although the actions performed were irrelevant to the categorization judgment, responses were significantly faster when actions were compatible with the visual context. This compatibility effect was largely driven by faster pinch responses when objects were presented in use-compatible, as compared with move-compatible, contexts. The present study is the first to highlight the influence of visual scene on stimulus-response compatibility effects during semantic object processing. These data support the hypothesis that action evocation during conceptual object processing is biased toward context-relevant actions.

Paternal identity impacts embryonic development for two species of freshwater fish.

PubMed

Siddique, Mohammad Abdul Momin; Linhart, Otomar; Krejszeff, Sławomir; Żarski, Daniel; Pitcher, Trevor E; Politis, Sebastian Nikitas; Butts, Ian Anthony Ernest

2017-05-01

Paternal, compared to maternal, contributions were believed to have only a limited influence on embryonic development and larval fitness traits in fishes. Therefore, the perspective of male influence on early life history traits has come under scrutiny. This study was conducted to determine parental effects on the rate of eyed embryos of Ide Leuciscus idus and Northern pike Esox lucius. Five sires and five dams from each species were crossed using a quantitative genetic breeding design and the resulting 25 sib groups of each species were reared to the embryonic eyed stage. We then partition variation in embryonic phenotypic performance to maternal, paternal, and parental interactions using the Restricted Maximum Likelihood (REML) model. Results showed that paternal, maternal, and the paternal×maternal interaction terms were highly significant for both species; clearly demonstrating that certain family combinations were more compatible than others. Paternal effects explained 20.24% of the total variance, which was 2-fold higher than the maternal effects (10.73%) in Ide, while paternal effects explained 18.9% of the total variance, which was 15-fold higher than the maternal effects (1.3%) in Northern pike. Together, these results indicate that male effects are of major importance during embryonic development for these species. Furthermore, this study demonstrates that genetic compatibility between sires and dams plays an important role and needs to be taken into consideration for reproduction of these and likely other economically important fish species. Copyright © 2016 Elsevier Inc. All rights reserved.

Novel insights into the functional metabolic impact of an apparent de novo m.8993T>G variant in the MT-ATP6 gene associated with maternally inherited form of Leigh Syndrome.

PubMed

Uittenbogaard, Martine; Brantner, Christine A; Fang, ZiShui; Wong, Lee-Jun C; Gropman, Andrea; Chiaramello, Anne

2018-03-27

In this study, we report a novel perpective of metabolic consequences for the m.8993T>G variant using fibroblasts from a proband with clinical symptoms compatible with Maternally Inherited Leigh Syndrome (MILS). Definitive diagnosis was corroborated by mitochondrial DNA testing for the pathogenic variant m.8993T>G in MT-ATP6 subunit by Sanger sequencing. The long-range PCR followed by massively parallel sequencing method detected the near homoplasmic m.8993T>G variant at 83% in the proband's fibroblasts and at 0.4% in the mother's fibroblasts. Our results are compatible with very low levels of germline heteroplasmy or an apparent de novo mutation. Our mitochondrial morphometric analysis reveals severe defects in mitochondrial cristae structure in the proband's fibroblasts. Our live-cell mitochondrial respiratory analyses show impaired oxidative phosphorylation with decreased spare respiratory capacity in response to energy stress in the proband's fibroblasts. We detected a diminished glycolysis with a lessened glycolytic capacity and reserve, revealing a stunted ability to switch to glycolysis upon full inhibition of OXPHOS activities. This dysregulated energy reprogramming results in a defective interplay between OXPHOS and glycolysis during an energy crisis. Our study sheds light on the potential pathophysiologic mechanism leading to chronic energy crisis in this MILS patient harboring the m.8993T>G variant. Copyright © 2018 Elsevier Inc. All rights reserved.

Compatibility Assessment of Fuel System Thermoplastics with Bio-Blendstock Fuel Candidates Using Hansen Solubility Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kass, Michael D.; West, Brian H.

The compatibility of key fuel system infrastructure plastics with 39 bio-blendstock fuel candidates was examined using Hansen solubility analysis. Fuel types included multiple alcohols, esters, ethers, ketones, alkenes and one alkane. These compounds were evaluated as neat molecules and as blends with the gasoline surrogate, dodecane, and a mix of dodecane and 10% ethanol (E10D). The plastics included polyphenylene sulfide (PPS), polyethylene terephthalate (PET), polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF), polyoxymethylene (POM), polybutylene terephthalate (PBT), polypropylene (PP), high density polyethylene (HDPE), along with several nylon grades. These materials have been rigorously studied with other fuel types, and their volume change resultsmore » were found to correspond well with their predicted solubility levels.The compatibility was assessed using Hansen solubility parameters and in many instances peak solubility occurred for blends rather than the neat fuel components. The results showed that good compatibilities can be expected for PPS, PVDF, PET, nylons, acetal, PEI, PVC, HDPE and PBT. PTFE showed potential incompatibilities at low blend concentrations, especially when E10D was used as the base fuel blend. Although, the nylons show good overall compatibility, the results do indicate that mid-range and high alcohol contents may not be suitable for Nylon 6 and Nylon 11 in applications requiring low volume swell. Poor potential compatibility was limited to two plastic types; PETG exposed to mid and high blend levels of the ethers and PP exposed to sabinene and the aromatics. In general, the data showed good compatibility for the majority of the candidate fuels and plastics.« less

Compatibility Assessment of Fuel System Thermoplastics with Bio-Blendstock Fuel Candidates Using Hansen Solubility Analysis

DOE PAGES

Kass, Michael D.; West, Brian H.

2018-01-03

The compatibility of key fuel system infrastructure plastics with 39 bio-blendstock fuel candidates was examined using Hansen solubility analysis. Fuel types included multiple alcohols, esters, ethers, ketones, alkenes and one alkane. These compounds were evaluated as neat molecules and as blends with the gasoline surrogate, dodecane, and a mix of dodecane and 10% ethanol (E10D). The plastics included polyphenylene sulfide (PPS), polyethylene terephthalate (PET), polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF), polyoxymethylene (POM), polybutylene terephthalate (PBT), polypropylene (PP), high density polyethylene (HDPE), along with several nylon grades. These materials have been rigorously studied with other fuel types, and their volume change resultsmore » were found to correspond well with their predicted solubility levels.The compatibility was assessed using Hansen solubility parameters and in many instances peak solubility occurred for blends rather than the neat fuel components. The results showed that good compatibilities can be expected for PPS, PVDF, PET, nylons, acetal, PEI, PVC, HDPE and PBT. PTFE showed potential incompatibilities at low blend concentrations, especially when E10D was used as the base fuel blend. Although, the nylons show good overall compatibility, the results do indicate that mid-range and high alcohol contents may not be suitable for Nylon 6 and Nylon 11 in applications requiring low volume swell. Poor potential compatibility was limited to two plastic types; PETG exposed to mid and high blend levels of the ethers and PP exposed to sabinene and the aromatics. In general, the data showed good compatibility for the majority of the candidate fuels and plastics.« less

Investigations of the Impact of Biodiesel Metal Contaminants on Emissions Control Devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brookshear, Daniel W; Lance, Michael J; Mccormick, Robert

Biodiesel is a renewable fuel with the potential to displace a portion of petroleum use. However, as with any alternative fuel, in order to be a viable choice it must be compatible with the emissions control devices. The finished biodiesel product can contain up to 5 ppm Na + K and 5 ppm Ca + Mg, and these metal impurities can lead to durability issues with the devices used to control emissions in diesel vehicles. Significant work has been performed to understand how the presence of these metals impacts each individual component of diesel emissions control systems, and this chaptermore » summarizes the findings of these research efforts.« less

Investigations of the Impact of Biodiesel Metal Contaminants on Emissions Control Devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brookshear, D. W.; Lance, M. J.; McCormick, Robert L.

Biodiesel is a renewable fuel with the potential to displace a portion of petroleum use. However, as with any alternative fuel, in order to be a viable choice it must be compatible with the emissions control devices. The finished biodiesel product can contain up to 5 ppm Na+K and 5 ppm Ca+Mg, and these metal impurities can lead to durability issues with the devices used to control emissions in diesel vehicles. Significant work has been performed to understand how the presence of these metals impacts each individual component of diesel emissions control systems, and this chapter summarizes the findings ofmore » these research efforts.« less

Simplifying impact of urban development on sewer systems.

PubMed

Kleidorfer, Manfred; Sitzenfrei, Robert; Rauch, Wolfgang

2014-01-01

Linking urban development and urban drainage models is a more and more popular approach when impacts of pavement of urban areas on sewer system performance are evaluated. As such an approach is a difficult task, this is not a feasible procedure for everyday engineering practice. We propose an alternative method, based on a developed simple near-quadratic relationship, which directly translates change (increase or decrease) of paved area into a change in the return period (RP) of the design rainfall event or design rainfall intensity. This formula is simple to use and compatible with existing design guidelines. A further advantage is that the calculated design RP can also be used to communicate the impact of a change in impervious areas to stakeholders or the public community. The method is developed using a set of 250 virtual and two real-world case studies and hydrodynamic simulations. It is validated on a small catchment for which we compare system performance and redesigned pipe diameters. Of course such a simplification contains different uncertainties. But these uncertainties have to be seen in the context of overall uncertainties when trying to predict city development into the future. Hence it still is a significant advantage compared to today's engineering practice.

Loss of compatibility might explain resistance of the Arabidopsis thaliana accession Te-0 to Golovinomyces cichoracearum.

PubMed

Fabro, Georgina; Alvarez, María Elena

2012-08-11

The establishment of compatibility between plants and pathogens requires compliance with various conditions, such as recognition of the right host, suppression of defence mechanisms, and maintenance of an environment allowing pathogen reproduction. To date, most of the plant factors required to sustain compatibility remain unknown, with the few best characterized being those interfering with defence responses. A suitable system to study host compatibility factors is the interaction between Arabidopsis thaliana and the powdery mildew (PM) Golovinomyces cichoracearum. As an obligate biotrophic pathogen, this fungus must establish compatibility in order to perpetuate. In turn, A. thaliana displays natural variation for susceptibility to this invader, with some accessions showing full susceptibility (Col-0), and others monogenic dominant resistance (Kas-1). Interestingly, Te-0, among other accessions, displays recessive partial resistance to this PM. In this study, we characterized the interaction of G. cichoracearum with Te-0 plants to investigate the basis of this plant resistance. We found that Te-0's incompatibility was not associated with hyper-activation of host inducible defences. Te-0 plants allowed germination of conidia and development of functional haustoria, but could not support the formation of mature conidiophores. Using a suppressive subtractive hybridization technique, we identified plant genes showing differential expression between resistant Te-0 and susceptible Col-0 plants at the fungal pre-conidiation stage. Te-0 resistance is likely caused by loss of host compatibility and not by stimulation of inducible defences. Conidiophores formation is the main constraint for completion of fungal life cycle in Te-0 plants. The system here described allowed the identification of genes proposed as markers for susceptibility to this PM.

Comparison of online reporting systems and their compatibility check with respective adverse drug reaction reporting forms.

PubMed

Maharshi, Vikas; Nagar, Pravesh

2017-01-01

Different forms and online tools are available in different countries for spontaneous reporting, one of the most widely used methods of pharmacovigilance. Capturing sufficient information and adequate compatibility of online systems with respective reporting form is highly desirable for appropriate reporting of adverse drug reactions (ADRs). This study was aimed to compare three major online reporting systems (US, UK, and WHO) of the world and also to check their compatibility with the respective ADR reporting form. A total of 89 data elements to provide relevant information were found out from above three online reporting systems. All three online systems were compared regarding magnitude of information captured by each of them and scoring was done by providing a score of "1" to each element. Compatibility of ADR reporting forms of India (Red form), US (Form 3500), and UK (Yellow card form) was assessed by comparing the information gathered by them with that can be entered into their respective online reporting systems, namely, "VigiFlow," "US online reporting," and "Yellow card online reporting." Each unmatching item was given a score of "-1". VigiFlow scored "74" points, whereas online reporting systems of the US and UK scored "56" and "49," respectively, regarding magnitude of the information gathered by them. Compatibility score was found to be "0," "-9," and "-26" in case of ADR reporting systems of US, UK, and India, respectively. Our study reveals that "VigiFlow" is capable of capturing the maximum amount of information but "Form 3500" and "Online reporting system of US" are maximally compatible to each other among ADR reporting systems of all three countries.

Variation in floral morphology and plant reproductive success in four Ipomoea species (Convolvulaceae) with contrasting breeding systems.

PubMed

Delgado-Dávila, R; Martén-Rodríguez, S; Huerta-Ramos, G

2016-11-01

This study tested the hypothesis that self-compatibility would be associated with floral traits that facilitate autonomous self-pollination to ensure reproduction under low pollinator visitation. In a comparison of two pairs of Ipomoea species with contrasting breeding systems, we predicted that self-compatible (SC) species would have smaller, less variable flowers, reduced herkogamy, lower pollinator visitation and higher reproductive success than their self-incompatible (SI) congeners. We studied sympatric species pairs, I. hederacea (SC)- I. mitchellae (SI) and I. purpurea (SC)-I. indica (SI), in Mexico, over two years. We quantified variation in floral traits and nectar production, documented pollinator visitation, and determined natural fruit and seed set. Hand-pollination and bagging experiments were conducted to determine potential for autonomous self-pollination and apomixis. Self-compatible Ipomoea species had smaller flowers and lower nectar production than SI species; however, floral variation and integration did not vary according to breeding system. Bees were primary pollinators of all species, but visitation rates were seven times lower in SC than SI species. SC species had a high capacity for autonomous self-pollination due to reduced herkogamy at the highest anther levels. Self-compatible species had two to six times higher fruit set than SI species. Results generally support the hypothesis that self-compatibility and autonomous self-pollination ensure reproduction under low pollinator visitation. However, high variation in morphological traits of SC Ipomoea species suggests they maintain variation through outcrossing. Furthermore, reduced herkogamy was associated with high potential for autonomous self-pollination, providing a reproductive advantage that possibly underlies transitions to self-compatibility in Ipomoea. © 2016 German Botanical Society and The Royal Botanical Society of the Netherlands.

Loss of compatibility might explain resistance of the Arabidopsis thaliana accession Te-0 to Golovinomyces cichoracearum

PubMed Central

2012-01-01

Background The establishment of compatibility between plants and pathogens requires compliance with various conditions, such as recognition of the right host, suppression of defence mechanisms, and maintenance of an environment allowing pathogen reproduction. To date, most of the plant factors required to sustain compatibility remain unknown, with the few best characterized being those interfering with defence responses. A suitable system to study host compatibility factors is the interaction between Arabidopsis thaliana and the powdery mildew (PM) Golovinomyces cichoracearum. As an obligate biotrophic pathogen, this fungus must establish compatibility in order to perpetuate. In turn, A. thaliana displays natural variation for susceptibility to this invader, with some accessions showing full susceptibility (Col-0), and others monogenic dominant resistance (Kas-1). Interestingly, Te-0, among other accessions, displays recessive partial resistance to this PM. Results In this study, we characterized the interaction of G. cichoracearum with Te-0 plants to investigate the basis of this plant resistance. We found that Te-0´s incompatibility was not associated with hyper-activation of host inducible defences. Te-0 plants allowed germination of conidia and development of functional haustoria, but could not support the formation of mature conidiophores. Using a suppressive subtractive hybridization technique, we identified plant genes showing differential expression between resistant Te-0 and susceptible Col-0 plants at the fungal pre-conidiation stage. Conclusions Te-0 resistance is likely caused by loss of host compatibility and not by stimulation of inducible defences. Conidiophores formation is the main constraint for completion of fungal life cycle in Te-0 plants. The system here described allowed the identification of genes proposed as markers for susceptibility to this PM. PMID:22883024

Visual compatibility of defibrotide with selected drugs during simulated Y-site administration.

PubMed

Correard, Florian; Savry, Amandine; Gauthier-Villano, Laurence; Pisano, Pascale; Pourroy, Bertrand

2014-08-01

The visual compatibility of a solution of defibrotide (the only drug recommended for treatment and prophylaxis of hepatic venoocclusive disease) with solutions of various drugs commonly administered in bone marrow transplant procedures was studied. Solutions of 43 drug products in concentrations typically used in clinical practice were evaluated in 1:1 mixtures with defibrotide solution in glass tubes kept at room temperature. The evaluated products included antiinfectious, corticoid, sedative, analgesic, and cardiovascular agents widely used for hematopoietic stem cell transplantation and other marrow transplant procedures; in most cases, test solutions were prepared via dilution in or reconstitution with sterile water, 0.9% sodium chloride injection, or 5% dextrose injection. The mixtures were visually observed immediately after manual mixing and at specified time points (60, 150, and 240 minutes). Visual compatibility was defined as the absence of color change, haze, fibers, particles, gas generation, and precipitate formation. The effect of mixing order on visual compatibility was ascertained. Of the 43 tested drug solutions, 36 were found to be visually compatible with the defibrotide solution over the entire four-hour study period. Solutions of 7 drugs (amikacin, furosemide, midazolam, mycophenolate mofetil, nicardipine, tobramycin, and vancomycin) were visually incompatible with defibrotide solution. In some cases, evidence of incompatibility was observed intermittently or was dependent on mixing order. Defibrotide solution was found to be visually compatible with solutions of 36 i.v. products that are likely to be coadministered with the drug in a bone marrow transplant unit. Seven drug solutions were visually incompatible with defibrotide solution. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Magnetic resonance imaging-compatible circular mapping catheter: an in vivo feasibility and safety study.

PubMed

Elbes, Delphine; Magat, Julie; Govari, Assaf; Ephrath, Yaron; Vieillot, Delphine; Beeckler, Christopher; Weerasooriya, Rukshen; Jais, Pierre; Quesson, Bruno

2017-03-01

Interventional cardiac catheter mapping is routinely guided by X-ray fluoroscopy, although radiation exposure remains a significant concern. Feasibility of catheter ablation for common flutter has recently been demonstrated under magnetic resonance imaging (MRI) guidance. The benefit of catheter ablation under MRI could be significant for complex arrhythmias such as atrial fibrillation (AF), but MRI-compatible multi-electrode catheters such as Lasso have not yet been developed. This study aimed at demonstrating the feasibility and safety of using a multi-electrode catheter [magnetic resonance (MR)-compatible Lasso] during MRI for cardiac mapping. We also aimed at measuring the level of interference between MR and electrophysiological (EP) systems. Experiments were performed in vivo in sheep (N = 5) using a multi-electrode, circular, steerable, MR-compatible diagnostic catheter. The most common MRI sequences (1.5T) relevant for cardiac examination were run with the catheter positioned in the right atrium. High-quality electrograms were recorded while imaging with a maximal signal-to-noise ratio (peak-to-peak signal amplitude/peak-to-peak noise amplitude) ranging from 5.8 to 165. Importantly, MRI image quality was unchanged. Artefacts induced by MRI sequences during mapping were demonstrated to be compatible with clinical use. Phantom data demonstrated that this 10-pole circular catheter can be used safely with a maximum of 4°C increase in temperature. This new MR-compatible 10-pole catheter appears to be safe and effective. Combining MR and multipolar EP in a single session offers the possibility to correlate substrate information (scar, fibrosis) and EP mapping as well as online monitoring of lesion formation and electrical endpoint. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2016. For permissions please email: journals.permissions@oup.com.

Performance consequences of alternating directional control-response compatibility: evidence from a coal mine shuttle car simulator.

PubMed

Zupanc, Christine M; Burgess-Limerick, Robin J; Wallis, Guy

2007-08-01

To investigate error and reaction time consequences of alternating compatible and incompatible steering arrangements during a simulated obstacle avoidance task. Underground coal mine shuttle cars provide an example of a vehicle in which operators are required to alternate between compatible and incompatible steering configurations. This experiment examines the performance of 48 novice participants in a virtual analogy of an underground coal mine shuttle car. Participants were randomly assigned to a compatible condition, an incompatible condition, an alternating condition in which compatibility alternated within and between hands, or an alternating condition in which compatibility alternated between hands. Participants made fewer steering direction errors and made correct steering responses more quickly in the compatible condition. Error rate decreased over time in the incompatible condition. A compatibility effect for both errors and reaction time was also found when the control-response relationship alternated; however, performance improvements over time were not consistent. Isolating compatibility to a hand resulted in reduced error rate and faster reaction time than when compatibility alternated within and between hands. The consequences of alternating control-response relationships are higher error rates and slower responses, at least in the early stages of learning. This research highlights the importance of ensuring consistently compatible human-machine directional control-response relationships.

Studies on scintillating fiber response

NASA Astrophysics Data System (ADS)

Albers, D.; Bisplinghoff, J.; Bollmann, R.; Büßer, K.; Cloth, P.; Diehl, O.; Dohrmann, F.; Drüke, V.; Engelhardt, H. P.; Ernst, J.; Eversheim, P. D.; Filges, D.; Gasthuber, M.; Gebel, R.; Greiff, J.; Groß, A.; Groß-Hardt, R.; Heine, A.; Heider, S.; Hinterberger, F.; Igelbrink, M.; Jahn, R.; Jeske, M.; Langkau, R.; Lindlein, J.; Maier, R.; Maschuw, R.; Mayer-Kuckuk, T.; Mertler, G.; Metsch, B.; Mosel, F.; Müller, M.; Münstermann, M.; Paetz gen. Schieck, H.; Petry, H. R.; Prasuhn, D.; Rohdjeß, H.; Rosendaal, D.; Roß, U.; von Rossen, P.; Scheid, H.; Schirm, N.; Schulz-Rojahn, M.; Schwandt, F.; Scobel, W.; Steeg, B.; Sterzenbach, G.; Trelle, H. J.; Wellinghausen, A.; Wiedmann, W.; Woller, K.; Ziegler, R.

1996-02-01

Scintillating fibers of type Bicron BCF-12 with 2 × 2 mm 2 cross section, up to 600 mm length, and PMMA cladding have been tested, in conjunction with the multi-channel photomultiplier Hamamatsu R 4760, with minimum ionizing electrons. The impact of cladding, extramural absorbers and/or wrapping on the light attenuation and photoelectron yield is studied in detail. Fibers have been circularly bent with radii of 171 mm and arranged in two layers to bundles forming granulated scintillator rings. Their performance in the EDDA experiment at COSY for detection of high energy protons revealed typically more than 9 (6) photoelectrons per fiber from bundles with (without) mirror on the rear side, guaranteeing detection efficiencies >99% and full compatibility with corresponding solid scintillator rings. The time resolution of 3.4 ns FWHM per fiber read out is essentially due to the R 4760.

The Risk of Transplant Failure With HLA Mismatch in First Adult Kidney Allografts From Deceased Donors.

PubMed

Williams, Robert C; Opelz, Gerhard; McGarvey, Chelsea J; Weil, E Jennifer; Chakkera, Harini A

2016-05-01

Since the beginning of the technology, there has been active debate about the role of human leucocyte antigen (HLA) matching in kidney allograft survival. Recent studies have reported diminishing importance of HLA matching, which have, in turn, been challenged by reports that suggest the continuing importance of these loci. Given the controversies, we examined the effect of HLA compatibility on kidney allograft survival by studying all first adult kidney transplants in the United States from a deceased donor. Using the United Network for Organ Sharing data, we identified first deceased donor kidney transplants between October 1, 1987, and December 31, 2013. Recipients were classified by their number of HLA mismatches. Cox multivariate regression analyses adjusting for recipient and donor transplant characteristics were performed to determine the impact of HLA compatibility on kidney allograft survival. Study cohort included 189 141 first adult kidney alone transplants, with a total of 994 558 years of kidney allograft follow-up time. Analyses adjusted for recipient and donor characteristics demonstrated a 13% higher risk (hazard ratio, 1.13; 95% confidence interval, 1.06-1.21) with 1 mismatch and a 64% higher risk (hazard ratio, 1.64, 95% confidence interval, 1.56-1.73) with 6 mismatches. Dividing the mismatch categories into 27 ordered permutations, and testing their 57 within mismatch category differences, demonstrated that all but 1 were equal, independent of locus. A significant linear relationship of hazard ratios was associated with HLA mismatch and affects allograft survival even during the recent periods of increasing success in renal transplantation.

The Role of Representation Strength of the Prime in Subliminal Visuomotor Priming.

PubMed

Wang, Yongchun; Wang, Yonghui; Liu, Peng; Di, Meilin; Gong, Yanyan; Tan, Mengge

2017-11-01

This study investigated the role of representation strength of the prime in subliminal visuomotor priming in two experiments. Prime/target compatibility (compatible and incompatible) and preposed object type (jumbled lines, strong masking; and rectangular outlines, weak masking) were manipulated in Experiment 1. A significant negative compatibility effect (NCE) was observed in the rectangle condition, whereas no compatibility effect was found in the line condition. However, when a new variable, prime duration, was introduced in Experiment 2, the NCE was reversed with an increase in the prime duration in the rectangle condition, whereas the NCE was maintained in the line condition. This result is consistent with the claim that increasing the prime duration causes the prime representation to be too strong for inhibition in the rectangle condition but strong enough to reliably trigger inhibition in the line condition. The findings demonstrated that prime representation has a causal role in subliminal visuomotor priming.

Compatibility and consistency in display-control systems - Implications for aircraft decision aid design

NASA Technical Reports Server (NTRS)

Andre, Anthony D.; Wickens, Christopher D.

1992-01-01

In this study we contrast display-control movement relations defined in terms of stimulus-response (physical) compatibility with those defined by stimulus-cognitive compatibility, and we relate these findings to the issue of command versus status levels of decision aid support. A second issue addressed is the cost of inconsistency across multiple display-control mappings. Subjects performed a flight control task while responding to one to four analog indicators, formatted as either command or status displays. The results suggest that there is an advantage for the status format when subjects are required to verbally report the state of the indicator(s), but no advantage was found for either format when subjects were required to manually correct the indicated state. The data point to the importance of display-control consistency and suggest that it may even outweigh that of compatibility.

A rapid compatibility analysis of potential offshore sand sources for beaches of the Santa Barbara Littoral Cell

USGS Publications Warehouse

Mustain, N.; Griggs, G.; Barnard, P.L.

2007-01-01

The beaches of the Santa Barbara Littoral Cell, which are narrow as a result of either natural and/or anthropogenic factors, may benefit from nourishment. Sand compatibility is fundamental to beach nourishment success and grain size is the parameter often used to evaluate equivalence. Only after understanding which sand sizes naturally compose beaches in a specific cell, especially the smallest size that remains on the beach, can the potential compatibility of source areas, such as offshore borrow sites, be accurately assessed. This study examines sediments on the beach and in the nearshore (5-20m depth) for the entire Santa Barbara Littoral Cell east of Point Conception. A digital bed sediment camera, the Eyeball??, and spatial autocorrelation technique were used to determine sediment grain size. Here we report on whether nearshore sediments are comparable and compatible with beach sands of the Santa Barbara Littoral Cell. ?? 2007 ASCE.

Enabling Exploration Through Docking Standards

NASA Technical Reports Server (NTRS)

Hatfield, Caris A.

2012-01-01

Human exploration missions beyond low earth orbit will likely require international cooperation in order to leverage limited resources. International standards can help enable cooperative missions by providing well understood, predefined interfaces allowing compatibility between unique spacecraft and systems. The International Space Station (ISS) partnership has developed a publicly available International Docking System Standard (IDSS) that provides a solution to one of these key interfaces by defining a common docking interface. The docking interface provides a way for even dissimilar spacecraft to dock for exchange of crew and cargo, as well as enabling the assembly of large space systems. This paper provides an overview of the key attributes of the IDSS, an overview of the NASA Docking System (NDS), and the plans for updating the ISS with IDSS compatible interfaces. The NDS provides a state of the art, low impact docking system that will initially be made available to commercial crew and cargo providers. The ISS will be used to demonstrate the operational utility of the IDSS interface as a foundational technology for cooperative exploration.

Electromagnetic interference assessment of an ion drive electric propulsion system

NASA Technical Reports Server (NTRS)

Whittlesey, A. C.

1979-01-01

The electromagnetic interference (EMI) form elements of an ion drive electric propulsion system was analyzed, and the effects of EMI interaction with a typical interplanetary spacecraft engineering and scientific subsystems were predicted. SEMCAP, a computerized electromagnetic compatibility assessment code, was used to analyze the impact of EMI noise sources on 65 engineering/telemetry circuits and 48 plasma wave and planetary radio astronomy channels measuring over the range of 100 Hz to 40 MHz in a spacecraft of the Voyager type; manual methods were used to evaluate electrostatics, magnetics, and communications effects. Results indicate that some conducted and radiated spectra are in excess of electromagnetic compatibility specification limits; direct design changes may be required for filtering and shielding of thrust system elements. The worst source of broadband radiated noise appears to be the power processor. The magnetic field necessary to thruster operation is equivalent to about 18 amp-sq m per amp of beam current at right angles to the axis caused by the neutralizer/plume loop.

Programmer/Analyst Guide for the Army Unit Resiliency Analysis (AURA) computer Simulation Model. Volume 1. AURA Methodology

DTIC Science & Technology

1990-10-01

involving a heavy artillery barrage, the impact point output alone could consume upwards of 10,000 pages of computer paper. For this reason, AURA provides...but pervasive factor: the asset allocation model must be compatible with the mathematical behavior of the input data. Thus, for example, if assets are...described as expendable during repair or decontamination activities, it must have HOMELINKS which appear in the consuming repair SUBCHAINs

Mineralogy and cooling history of magnesian lunar granulite 67415

NASA Technical Reports Server (NTRS)

Takeda, Hiroshi; Miyamoto, Masamichi

1993-01-01

Apollo granulite 67415 was investigated by mineralogical techniques to gain better understanding of cooling histories of lunar granulities. Cooling rates were estimated from chemical zoning of olivines in magnesian granulitic clasts by computer simulation of diffusion processes. The cooling rate of 10 deg C/yr obtained is compatible with a model of the granulite formation, in which the impact deposit was cooled from high temperature or annealed, at the depth of about 25 m beneath the surface.

Surface modification of bioactive glass nanoparticles and the mechanical and biological properties of poly(L-lactide) composites.

PubMed

Liu, Aixue; Hong, Zhongkui; Zhuang, Xiuli; Chen, Xuesi; Cui, Yang; Liu, Yi; Jing, Xiabin

2008-07-01

Novel bioactive glass (BG) nanoparticles/poly(L-lactide) (PLLA) composites were prepared as promising bone-repairing materials. The BG nanoparticles (Si:P:Ca=29:13:58 weight ratio) of about 40nm diameter were prepared via the sol-gel method. In order to improve the phase compatibility between the polymer and the inorganic phase, PLLA (M(n)=9700Da) was linked to the surface of the BG particles by diisocyanate. The grafting ratio of PLLA was in the vicinity of 20 wt.%. The grafting modification could improve the tensile strength, tensile modulus and impact energy of the composites by increasing the phase compatibility. When the filler loading reached around 4 wt.%, the tensile strength of the composite increased from 56.7 to 69.2MPa for the pure PLLA, and the impact strength energy increased from 15.8 to 18.0 kJ m(-2). The morphology of the tensile fracture surface of the composite showed surface-grafted bioactive glass particles (g-BG) to be dispersed homogeneously in the PLLA matrix. An in vitro bioactivity test showed that, compared to pure PLLA scaffold, the BG/PLLA nanocomposite demonstrated a greater capability to induce the formation of an apatite layer on the scaffold surface. The results of marrow stromal cell culture revealed that the composites containing either BG or g-BG particles have much better biocompatibility compared to pure PLLA material.

Equine Vaccines: How, When and Why? Report of the Vaccinology Session, French Equine Veterinarians Association, 2016, Reims

PubMed Central

Paillot, Romain; Marcillaud Pitel, Christel; D’Ablon, Xavier; Pronost, Stéphane

2017-01-01

To date, vaccination is one of the most efficient methods of prevention against equine infectious diseases. The vaccinology session, which was organised during the annual meeting of the French Equine Veterinarians Association (AVEF) at Reims (France) in 2016, aimed to approach three subjects of importance for the equine industry. Vaccination against three major equine diseases were used as examples: equine influenza (equine influenza virus), rhinopneumonitis (equine herpes virus 1/4), and tetanus (Clostridium tetani neuro-toxin). (1) Emergency vaccination: while it has been very successful to reduce the impact of equine influenza epizooties and it is also recommended for tetanus in case of surgery and accident, the benefit of emergency vaccination against equine herpes virus 1/4 remains arguable; (2) Compatibility of equine vaccines from different brands: despite being a frequent concerns for equine veterinarians, little information is available about the compatibility of equine vaccines from different commercial origins. The consequence of mixing different equine vaccines targeting the same disease is believed to be limited but scientific evidences are sparse; and, (3) Laps vaccination and vaccine shortage: they could have serious consequences in terms of protection and their impact should be evaluated on a case by case basis, taking into account the risk of contact with the pathogen and the effect on herd immunity. PMID:29207516

Compatibility: drugs and parenteral nutrition

PubMed Central

Miranda, Talita Muniz Maloni; Ferraresi, Andressa de Abreu

2016-01-01

ABSTRACT Objective Standardization and systematization of data to provide quick access to compatibility of leading injectable drugs used in hospitals for parenteral nutrition. Methods We selected 55 injectable drugs analyzed individually with two types of parenteral nutrition: 2-in-1 and 3-in-1. The following variables were considered: active ingredient, compatibility of drugs with the parenteral nutrition with or without lipids, and maximum drug concentration after dilution for the drugs compatible with parenteral nutrition. Drugs were classified as compatible, incompatible and untested. Results After analysis, relevant information to the product’s compatibility with parental nutrition was summarized in a table. Conclusion Systematization of compatibility data provided quick and easy access, and enabled standardizing pharmacists work. PMID:27074235

Solid state compatibility study and characterization of a novel degradation product of tacrolimus in formulation.

PubMed

Rozman Peterka, Tanja; Grahek, Rok; Hren, Jure; Bastarda, Andrej; Bergles, Jure; Urleb, Uroš

2015-06-10

Tacrolimus is macrolide drug that is widely used as a potent immunosuppressant. In the present work compatibility testing was conducted on physical mixtures of tacrolimus with excipients and on compatibility mixtures prepared by the simulation of manufacturing process used for the final drug product preparation. Increase in one major degradation product was detected in the presence of magnesium stearate based upon UHPLC analysis. The degradation product was isolated by preparative HPLC and its structure was elucidated by NMR and MS studies. Mechanism of the formation of this degradation product is proposed based on complementary degradation studies in a solution and structural elucidation data. The structure was proven to be alpha-hydroxy acid which is formed from the parent tacrolimus molecule through a benzilic acid type rearrangement reaction in the presence of divalent metallic cations. Degradation is facilitated at higher pH values. Copyright © 2015 Elsevier B.V. All rights reserved.

Environmental analysis in the selection of alternative corridors in a long-distance linear project: a methodological proposal.

PubMed

Rescia, Alejandro J; Astrada, Elizabeth N; Bono, Julieta; Blasco, Carlos A; Meli, Paula; Adámoli, Jorge M

2006-08-01

A linear engineering project--i.e. a pipeline--has a potential long- and short-term impact on the environment and on the inhabitants therein. We must find better, less expensive, and less time-consuming ways to obtain information on the environment and on any modifications resulting from anthropic activity. We need scientifically sound, rapid and affordable assessment and monitoring methods. Construction companies, industries and the regulating government organisms lack the resources needed to conduct long-term basic studies of the environment. Thus there is a need to make the necessary adjustments and improvements in the environmental data considered useful for this development project. More effective and less costly methods are generally needed. We characterized the landscape of the study area, situated in the center and north-east of Argentina. Little is known of the ecology of this region and substantial research is required in order to develop sustainable uses and, at the same time, to develop methods for reducing impacts, both primary and secondary, resulting from anthropic activity in this area. Furthermore, we made an assessment of the environmental impact of the planned linear project, applying an ad hoc impact index, and we analyzed the different alternatives for a corridor, each one of these involving different sections of the territory. Among the alternative corridors considered, this study locates the most suitable ones in accordance with a selection criterion based on different environmental and conservation aspects. We selected the corridor that we considered to be the most compatible--i.e. with the least potential environmental impact--for the possible construction and operation of the linear project. This information, along with suitable measures for mitigating possible impacts, should be the basis of an environmental management plan for the design process and location of the project. We pointed out the objectivity and efficiency of this methodological approach, along with the possibility of integrating the information in order to allow for the application thereof in this type of study.

Compatibility of Space Nuclear Power Plant Materials in an Inert He/Xe Working Gas Containing Reactive Impurities

DOE Office of Scientific and Technical Information (OSTI.GOV)

MM Hall

2006-01-31

A major materials selection and qualification issue identified in the Space Materials Plan is the potential for creating materials compatibility problems by combining dissimilar reactor core, Brayton Unit and other power conversion plant materials in a recirculating, inert He/Xe gas loop containing reactive impurity gases. Reported here are results of equilibrium thermochemical analyses that address the compatibility of space nuclear power plant (SNPP) materials in high temperature impure He gas environments. These studies provide early information regarding the constraints that exist for SNPP materials selection and provide guidance for establishing test objectives and environments for SNPP materials qualification testing.

[Study on processing adjuvant medicines in Lei Gong's treatise on preparation and broiling of materia medica (Leigong Paozhi Lun)].

PubMed

Zhang, Wei; Zhang, Ruixian

2010-09-01

There were 268 kinds of medicines recorded in the book of Lei Gong's Treatise on preparation and broiling of materia medica (Leigong Paozhi Lun). Among these medicines, 178 medicines were prepared with adjuvant medicines, including general and special compatible adjuvant medicines. These adjuvant medicines used in this book can be explained by the theory of "seven-relation compatibility". The author tried to explain the usage and their compatibility of these adjuvant medicines and put forward that attention should be paid to the changes in functions of medicines and the influences of society should be paid attention.

Hemisphere division and its effect on selective attention: a generality examination of Lavie's load theory.

PubMed

Nishimura, Ritsuko; Yoshizaki, Kazuhito; Kato, Kimiko; Hatta, Takeshi

2009-01-01

The present study examined the role of visual presentation mode (unilateral vs. bilateral visual fields) on attentional modulation. We examined whether or not the presentation mode affects the compatibility effect, using a paradigm involving two task-relevant letter arrays. Sixteen participants identified a target letter among task-relevant letters while ignoring either a compatible or incompatible distracter letter that was presented to both hemispheres. Two letters arrays were presented to visual fields, either unilaterally or bilaterally. Results indicated that the compatibility effect was greater in bilateral than in unilateral visual field conditions. Findings support the assumption that the two hemispheres have separate attentional resources.

Addressing the instability of DNA nanostructures in tissue culture.

PubMed

Hahn, Jaeseung; Wickham, Shelley F J; Shih, William M; Perrault, Steven D

2014-09-23

DNA nanotechnology is an advanced technique that could contribute diagnostic, therapeutic, and biomedical research devices to nanomedicine. Although such devices are often developed and demonstrated using in vitro tissue culture models, these conditions may not be compatible with DNA nanostructure integrity and function. The purpose of this study was to characterize the sensitivity of 3D DNA nanostructures produced via the origami method to the in vitro tissue culture environment and identify solutions to prevent loss of nanostructure integrity. We examined whether the physiological cation concentrations of cell culture medium and the nucleases present in fetal bovine serum (FBS) used as a medium supplement result in denaturation and digestion, respectively. DNA nanostructure denaturation due to cation depletion was design- and time-dependent, with one of four tested designs remaining intact after 24 h at 37 °C. Adjustment of medium by addition of MgSO4 prevented denaturation. Digestion of nanostructures by FBS nucleases in Mg(2+)-adjusted medium did not appear design-dependent and became significant within 24 h and when medium was supplemented with greater than 5% FBS. We estimated that medium supplemented with 10% FBS contains greater than 256 U/L equivalent of DNase I activity in digestion of DNA nanostructures. Heat inactivation at 75 °C and inclusion of actin protein in medium inactivated and inhibited nuclease activity, respectively. We examined the impact of medium adjustments on cell growth, viability, and phenotype. Adjustment of Mg(2+) to 6 mM did not appear to have a detrimental impact on cells. Heat inactivation was found to be incompatible with in vitro tissue culture, whereas inclusion of actin had no observable effect on growth and viability. In two in vitro assays, immune cell activation and nanoparticle endocytosis, we show that using conditions compatible with cell phenotype and nanostructure integrity is critical for obtaining reliable experimental data. Our study thus describes considerations that are vital for researchers undertaking in vitro tissue culture studies with DNA nanostructures and some potential solutions for ensuring that nanostructure integrity and functions are maintained during experiments.

Genetic Diversity and Symbiotic Efficiency of Indigenous Common Bean Rhizobia in Croatia.

PubMed

Pohajda, Ines; Babić, Katarina Huić; Rajnović, Ivana; Kajić, Sanja; Sikora, Sanja

2016-12-01

Nodule bacteria (rhizobia) in symbiotic associations with legumes enable considerable entries of biologically fixed nitrogen into soil. Efforts are therefore made to intensify the natural process of symbiotic nitrogen fixation by legume inoculation. Studies of field populations of rhizobia open up the possibility to preserve and probably exploit some indigenous strains with hidden symbiotic or ecological potentials. The main aim of the present study is to determine genetic diversity of common bean rhizobia isolated from different field sites in central Croatia and to evaluate their symbiotic efficiency and compatibility with host plants. The isolation procedure revealed that most soil samples contained no indigenous common bean rhizobia. The results indicate that the cropping history had a significant impact on the presence of indigenous strains. Although all isolates were found to belong to species Rhizobium leguminosarum , significant genetic diversity at the strain level was determined. Application of both random amplification of polymorphic DNA (RAPD) and enterobacterial repetitive intergenic consensus-polymerase chain reaction (ERIC- -PCR) methods resulted in similar grouping of strains. Symbiotic efficiency of indigenous rhizobia as well as their compatibility with two commonly grown bean varieties were tested in field experiments. Application of indigenous rhizobial strains as inoculants resulted in significantly different values of nodulation, seed yield as well as plant nitrogen and seed protein contents. The most abundant nodulation and the highest plant nitrogen and protein contents were determined in plants inoculated with R. leguminosarum strains S 17/2 and S 21/6 . Although, in general, the inoculation had a positive impact on seed yield, differences depending on the applied strain were not determined. The overall results show the high degree of symbiotic efficiency of the specific indigenous strain S 21/6 . These results indicate different symbiotic potential of indigenous strains and confirmed the importance of rhizobial strain selection. These are the first studies of indigenous common bean rhizobia in Croatia that provide the basis for further characterization and selection of highly efficient indigenous strains and their potential use in agricultural practice and future research.

Outcome of ABO-incompatible adult living-donor liver transplantation for patients with hepatocellular carcinoma.

PubMed

Yoon, Young-In; Song, Gi-Won; Lee, Sung-Gyu; Hwang, Shin; Kim, Ki-Hun; Kim, Seok-Hwan; Kang, Woo-Hyoung; Cho, Hwui-Dong; Jwa, Eun-Kyoung; Kwon, Jae-Hyun; Tak, Eun-Young; Kirchner, Varvara A

2018-06-01

Living-donor liver transplantation (LDLT) can simultaneously cure hepatocellular carcinoma (HCC) and underlying liver cirrhosis, improving long-term results in patients with HCC. ABO-incompatible LDLT could expand the living-donor pool, reduce waiting times for deceased-donor liver transplantation, and improve long-term survival for some patients with HCC. We retrospectively reviewed the medical records of patients undergoing LDLT for HCC from November 2008 to December 2015 at a single institution in Korea. In total, 165 patients underwent ABO-incompatible and 753 patients underwent ABO-compatible LDLT for HCC. ABO-incompatible recipients underwent desensitization to overcome the ABO blood group barrier, including pretransplant plasma exchange and rituximab administration (300-375 mg/m 2 /body surface area). We performed 1:1 propensity score matching and included 165 patients in each group. 82.4% of ABO-incompatible and 83.0% of -compatible LDLT groups had HCC within conventional Milan criteria, respectively, and 92.1% and 92.7% of patients in each group had a Child-Pugh score of A or B. ABO-incompatible and -compatible LDLT groups were followed up for 48.0 and 48.7 months, respectively, with both groups showing comparable recurrence-free survival rates (hazard ratio [HR] 1.14; 95% CI 0.68-1.90; p = 0.630) and overall patient-survival outcomes (HR 1.10; 95% CI 0.60-2.00; p = 0.763). These findings suggested that ABO-incompatible liver transplantation is a feasible option for patients with HCC, especially for those with compensated cirrhosis with HCC within conventional Milan criteria. Despite hypothetical immunological concerns that the desensitization protocol for breaking through the ABO blood group barrier might have a negative impact on the recurrence of hepatocellular carcinoma, our experience demonstrated no significant differences in the long-term overall survival and recurrence-free survival rates between patients receiving ABO-compatible or ABO-incompatible liver transplantation. In conclusion, results from our institution indicated that ABO-incompatible living-donor liver transplantation constitutes a potentially feasible option for patients with hepatocellular carcinoma, especially those with compensated cirrhosis with hepatocellular carcinoma within conventional Milan criteria. Copyright © 2018 European Association for the Study of the Liver. Published by Elsevier B.V. All rights reserved.

A method for improved visual landscape compatibility of mobile home park

Treesearch

Daniel R. Jones

1979-01-01

This paper is a description of a research effort directed to improving the visual image of mobile home parks in the landscape. The study is an application of existing methodologies for measuring scenic quality and visual landscape compatibility to an unsolved problem. The paper summarizes two major areas of investigation: regional location factors based on visual...

Cooperation, Convertibility, and Compatibility Among Information Systems: A Literature Review.

ERIC Educational Resources Information Center

Henderson, Madeline M.; And Others

The purpose of the study of the literature on which this report is based was to examine those problems in the field of documentation and in the operation of information systems which could possibly be solved or alleviated by some greater measure of cooperation, convertibility, or compatibility among systems, particularly those systems for handling…

Calcium Chloride in Neonatal Parenteral Nutrition Solutions with and without Added Cysteine: Compatibility Studies Using Laser and Micro-Flow Imaging Methodology.

PubMed

Huston, Robert K; Christensen, J Mark; Alshahrani, Sultan M; Mohamed, Sumeia M; Clark, Sara M; Nason, Jeffrey A; Wu, Ying Xing

2015-01-01

Previous studies of compatibility of calcium chloride (CaCl2) and phosphates have not included particle counts in the range specified by the United States Pharmacopeia. Micro-flow imaging techniques have been shown to be comparable to light obscuration when determining particle count and size in pharmaceutical solutions. The purpose of this study was to do compatibility testing for parenteral nutrition (PN) solutions containing CaCl2 using dynamic light scattering and micro-flow imaging techniques. Solutions containing TrophAmine (Braun Medical Inc, Irvine, CA), CaCl2, and sodium phosphate (NaPhos) were compounded with and without cysteine. All solutions contained standard additives to neonatal PN solutions including dextrose, trace metals, and electrolytes. Control solutions contained no calcium or phosphate. Solutions were analyzed for particle size and particle count. Means of Z-average particle size and particle counts of controls were determined. Study solutions were compared to controls and United States Pharmacopeia (USP) Chapter 788 guidelines. The maximum amount of Phos that was compatible in solutions that contained at least 10 mmol/L of Ca in 2.5% amino acids (AA) was determined. Compatibility of these solutions was verified by performing analyses of 5 repeats of these solutions. Microscopic analyses of the repeats were also performed. Amounts of CaCl2 and NaPhos that were compatible in solutions containing 1.5%, 2%, 2.5%, and 3% AA were determined. The maximum amount of NaPhos that could be added to TrophAmine solutions of > = 2.5% AA containing at least 10 mmol/L of CaCl2 was 7.5 mmol/L. Adding 50 mg/dL of cysteine increased the amount of NaPhos that could be added to solutions containing 10 mmol/L of CaCl2 to 10 mmol/L. Calcium chloride can be added to neonatal PN solutions containing NaPhos in concentrations that can potentially provide an intravenous intake of adequate amounts of calcium and phosphorus.

The compatibility of consumer DLP projectors with time-sequential stereoscopic 3D visualisation

NASA Astrophysics Data System (ADS)

Woods, Andrew J.; Rourke, Tegan

2007-02-01

A range of advertised "Stereo-Ready" DLP projectors are now available in the market which allow high-quality flickerfree stereoscopic 3D visualization using the time-sequential stereoscopic display method. The ability to use a single projector for stereoscopic viewing offers a range of advantages, including extremely good stereoscopic alignment, and in some cases, portability. It has also recently become known that some consumer DLP projectors can be used for timesequential stereoscopic visualization, however it was not well understood which projectors are compatible and incompatible, what display modes (frequency and resolution) are compatible, and what stereoscopic display quality attributes are important. We conducted a study to test a wide range of projectors for stereoscopic compatibility. This paper reports on the testing of 45 consumer DLP projectors of widely different specifications (brand, resolution, brightness, etc). The projectors were tested for stereoscopic compatibility with various video formats (PAL, NTSC, 480P, 576P, and various VGA resolutions) and video input connections (composite, SVideo, component, and VGA). Fifteen projectors were found to work well at up to 85Hz stereo in VGA mode. Twenty three projectors would work at 60Hz stereo in VGA mode.

Electromagnetic Compatibility Design of the Computer Circuits

NASA Astrophysics Data System (ADS)

Zitai, Hong

2018-02-01

Computers and the Internet have gradually penetrated into every aspect of people’s daily work. But with the improvement of electronic equipment as well as electrical system, the electromagnetic environment becomes much more complex. Electromagnetic interference has become an important factor to hinder the normal operation of electronic equipment. In order to analyse the computer circuit compatible with the electromagnetic compatibility, this paper starts from the computer electromagnetic and the conception of electromagnetic compatibility. And then, through the analysis of the main circuit and system of computer electromagnetic compatibility problems, we can design the computer circuits in term of electromagnetic compatibility. Finally, the basic contents and methods of EMC test are expounded in order to ensure the electromagnetic compatibility of equipment.

Physical and Chemical Compatibility of Injectable Acetaminophen During Simulated Y-Site Administration

PubMed Central

Anderson, Collin; Boehme, Sabrina; Ouellette, Jacquelyn; Stidham, Chanelle; MacKay, Mark

2014-01-01

Purpose: The physical and chemical compatibility of intravenous acetaminophen with commonly administered injectable medications was evaluated. Methods: Simulated Y-site evaluation was accomplished by mixing 2 mL of acetaminophen (10 mg/mL) with 2 mL of an alternative intravenous medication and subsequently storing the mixture in a polypropylene syringe for 4 hours. The aliquot solutions were visually inspected and evaluated for crystal content at 4 hours by infusing 4 mL of the medication mixture through a 0.45-μm nitrocellulose filter disc. Medication mixtures that were selected for chemical stability testing were analyzed by high-performance liquid chromatography at 0, 1, and 4 hours using a Zorbax Eclipse Plus C18, 4.6 x 100 mm, 3.5-μm column for separation of analytes with subsequent diode-array detection. Medications were considered chemically compatible if the concentrations of all components were >90% of the original concentrations during the 4 hour simulated Y-site compatibility test. Results: U.S. Pharmacopeial Convention (USP) standards for physical particle counts were met for acetaminophen injection (10 mg/mL) when combined with cefoxitin, ceftriaxone, clindamycin, dexamethasone, diphenhydramine, dolasetron, fentanyl, granisetron, hydrocortisone, hydromorphone, ketorolac, meperidine, methylprednisolone, midazolam, morphine, nalbuphine, ondansetron, piperacillin/tazobactam, ranitidine, and vancomycin. Injectable acetaminophen is incompatible with acyclovir and diazepam and therefore should not be administered concomitantly with either of these products. Further testing confirmed the chemical compatibility of acetaminophen with ceftriaxone, diphenhydramine, granisetron, ketorolac, nalbuphine, ondansetron, piperacillin/tazobactam, and vancomycin. Conclusion: All medications tested with acetaminophen were physically compatible except for acyclovir and diazepam. All 8 medications tested for chemical compatibility with acetaminophen were stable over the 4 hour simulated Y-site administration study. PMID:24421562

Socialization in Pigtailed Macaques (Macaca nemestrina)

PubMed Central

WORLEIN, JULIE M.; KROEKER, ROSE; LEE, GRACE H.; THOM, JINHEE P.; BELLANCA, RITA U.; CROCKETT, CAROLYN M.

2018-01-01

In response to new emphasis by regulatory agencies regarding socialization, behavioral management programs are allocating greater resources to maximize socialization opportunities for laboratory primates. Information regarding predictors of compatibility and risk of injury for all laboratory-housed species of macaques are needed to make social introductions and pairings as efficient and safe as possible. This study presents data on 674 pairs of pigtailed macaques (Macaca nemestrina) at the Washington National Primate Research Center over a 7-year period. During pair introduction, behavior was monitored while the degree of tactile contact was gradually increased. Based on observed behavior, pairs were assigned a behavioral introduction score (BIS), rating the quality of their interactions for each day of introduction. Animals deemed compatible, based on the BIS and technologist judgment, were allowed to progress to continuous contact with no staff present. A small proportion of animals deemed compatible at introduction was later separated for subsequent incompatibility or aggression; these proportions were higher in full contact compared to protected contact pairings. Of 674 pairs, 75% were deemed compatible at introduction in protected contact; 86 of these pairs were later transitioned to full contact with 98% compatibility. Predictors of decreased compatibility assessed during protected contact introductions included age (adult pairs were less compatible), the BIS on the last day of introduction, and aggression or injury during the introductory period. Predictors of injuries during the protected contact introduction process included: aggression on the first day of introduction, a negative BIS on the first or last day of introduction, and, surprisingly, the presence of grooming on the first day of introduction. Injuries during both introduction and subsequent pairing in protected contact were rare; however, injury rates increased significantly during full-contact pairing. These findings underscore the necessity of species-specific data to guide decision-making during the social introduction process. PMID:27109591

Compatibility Conditions of Structural Mechanics

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Coroneos, Rula M.; Hopkins, Dale A.

1999-01-01

The theory of elasticity has camouflaged a deficiency in the compatibility formulation since 1860. In structures the ad hoc compatibility conditions through virtual "cuts" and closing "gaps" are not parallel to the strain formulation in elasticity. This deficiency in the compatibility conditions has prevented the development of a direct stress determination method in structures and in elasticity. We have addressed this deficiency and attempted to unify the theory of compatibility. This work has led to the development of the integrated force method for structures and the completed Beltrami-Michell formulation for elasticity. The improved accuracy observed in the solution of numerical examples by the integrated force method can be attributed to the compliance of the compatibility conditions. Using the compatibility conditions allows mapping of variables and facile movement among different structural analysis formulations. This paper reviews and illustrates the requirement of compatibility in structures and in elasticity. It also describes the generation of the conditions and quantifies the benefits of their use. The traditional analysis methods and available solutions (which have been obtained bypassing the missed conditions) should be verified for compliance of the compatibility conditions.

Assessing the compatibility of the management of standardized procedures with the complexity of a sociotechnical system: case study of a control room in an oil refinery.

PubMed

Saurin, Tarcisio Abreu; Gonzalez, Santiago Sosa

2013-09-01

Although the need for the management of complex socio-technical systems (STS) to be compatible with the nature of those systems is widely recognized, there are few guidelines on how to determine the actual extent of this compatibility. The purpose of this study is to assess how compatible the management of standardized procedures (SPs) is with the nature of a complex STS. To this end, a case study was made of a control room in an oil refinery, involving the following stages: (a) delimitation of the investigated STS; (b) description of the STS according to a set of characteristics of complex STS; (c) application of two types of questionnaires to thirty workers - one of them to assess their perceptions about the applicability of seven principles of SPs management in complex STS and the other to determine their perceptions about the actual use of these principles; and (d) a feedback meeting with workers to discuss the results of the assessment. The assessment is discussed in terms of its limitations, usefulness and ease of use of the data collection and analysis tools. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Pulsed magnetic field excitation sensitivity of match-type electric blasting caps

NASA Astrophysics Data System (ADS)

Parson, Jonathan; Dickens, James; Walter, John; Neuber, Andreas A.

2010-10-01

This paper presents a study on energy deposition and electromagnetic compatibility of match-type electroexplosive devices (EEDs), which recently have found more usage in pulsed power environments with high electromagnetic interference (EMI) background. The sensitivity of these devices makes them dangerous to intended and unintended radiation produced by devices commonly used in pulsed power environments. Match-type EEDs have been found to be susceptible to such low levels of energy (7-8 mJ) that safe operation of these EEDs is vital when in use near devices that produce high levels of pulsed EMI. The scope of this paper is to provide an investigation that incorporates results of similar studies to provide detonation characteristics of these EEDs. The three topics included in this study are sensitivity testing, modeling of the thermodynamic heat propagation, and electromagnetic compatibility from pulsed electromagnetic radiation. The thermodynamic joule heating of the primary explosive has been modeled by a solution to the 1D heat equation. A simple pulsed generator, Marx generator with an inductive load, was used for the electromagnetic compatibility assessment of the coupled field between the pulse generator and shorted EED. The results of the electromagnetic compatibility assessment relate the resistive, inductive, and capacitive components of the pulse generator to the area of the shorted EED.

Pulsed magnetic field excitation sensitivity of match-type electric blasting caps.

PubMed

Parson, Jonathan; Dickens, James; Walter, John; Neuber, Andreas A

2010-10-01

This paper presents a study on energy deposition and electromagnetic compatibility of match-type electroexplosive devices (EEDs), which recently have found more usage in pulsed power environments with high electromagnetic interference (EMI) background. The sensitivity of these devices makes them dangerous to intended and unintended radiation produced by devices commonly used in pulsed power environments. Match-type EEDs have been found to be susceptible to such low levels of energy (7-8 mJ) that safe operation of these EEDs is vital when in use near devices that produce high levels of pulsed EMI. The scope of this paper is to provide an investigation that incorporates results of similar studies to provide detonation characteristics of these EEDs. The three topics included in this study are sensitivity testing, modeling of the thermodynamic heat propagation, and electromagnetic compatibility from pulsed electromagnetic radiation. The thermodynamic joule heating of the primary explosive has been modeled by a solution to the 1D heat equation. A simple pulsed generator, Marx generator with an inductive load, was used for the electromagnetic compatibility assessment of the coupled field between the pulse generator and shorted EED. The results of the electromagnetic compatibility assessment relate the resistive, inductive, and capacitive components of the pulse generator to the area of the shorted EED.

Impact of solids on composite materials

NASA Technical Reports Server (NTRS)

Bronson, Arturo; Maldonado, Jerry; Chern, Tzong; Martinez, Francisco; Mccord-Medrano, Johnnie; Roschke, Paul N.

1987-01-01

The failure modes of composite materials as a result of low velocity impact were investigated by simulating the impact with a finite element analysis. An important facet of the project is the modeling of the impact of a solid onto cylindrical shells composed of composite materials. The model under development will simulate the delamination sustained when a composite material encounters impact from another rigid body. The computer equipment was installed, the computer network tested, and a finite element method model was developed to compare results with known experimental data. The model simulated the impact of a steel rod onto a rotating shaft. Pre-processing programs (GMESH and TANVEL) were developed to generate node and element data for the input into the three dimensional, dynamic finite element analysis code (DYNA3D). The finite element mesh was configured with a fine mesh near the impact zone and a coarser mesh for the impacting rod and the regions surrounding the impacting zone. For the computer simulation, five impacting loads were used to determine the time history of the stresses, the scribed surface areas, and the amount of ridging. The processing time of the computer codes amounted from 1 to 4 days. The calculated surface area were within 6-12 percent, relative error when compated to the actual scratch area.

The debate over the Cretaceous-Tertiary boundary

NASA Technical Reports Server (NTRS)

Alvarez, W.; Asaro, F.; Alvarez, L. W.; Michel, H. V.

1988-01-01

Large-body impact on the Earth is a rare but indisputable geologic process. The impact rate is approximately known from objects discovered in Earth-crossing orbits and from the statistics of craters on the Earth's surface. Tektite and microtektite strewn fields constitute unmistakable ejecta deposits that can be due only to large-body impacts. The Cretaceous-Tertiary (K-T) boundary coincides with an unusually severe biological trauma, and this stratigraphic horizon is marked on a worldwide basis by anomalous concentrations of noble metals in chondritic proportions, mineral spherules with relict quench-crystallization textures, and mineral and rock grains showing shock deformation. These features are precisely compatible with an impact origin. Although only impact explains all the types of K-T boundary evidence, the story may not be as simple as once thought. The original hypothesis envisioned one large impact, triggering one great extinction. Newer evidence hints at various complications. Different challenges are faced by the occupants of each apex of a three-cornered argument over the K-T event. Proponents of a non-impact explanation must show that the evidence fits their preferred model better than it fits the impact scenario. Proponents of the single impact-single extinction view must explain away the complications. Proponents of a more complex impact crisis must develop a reasonable scenario which honors the new evidence.

Speaking two languages with different number naming systems: What implications for magnitude judgments in bilinguals at different stages of language acquisition?

PubMed

Van Rinsveld, Amandine; Schiltz, Christine; Landerl, Karin; Brunner, Martin; Ugen, Sonja

2016-08-01

Differences between languages in terms of number naming systems may lead to performance differences in number processing. The current study focused on differences concerning the order of decades and units in two-digit number words (i.e., unit-decade order in German but decade-unit order in French) and how they affect number magnitude judgments. Participants performed basic numerical tasks, namely two-digit number magnitude judgments, and we used the compatibility effect (Nuerk et al. in Cognition 82(1):B25-B33, 2001) as a hallmark of language influence on numbers. In the first part we aimed to understand the influence of language on compatibility effects in adults coming from German or French monolingual and German-French bilingual groups (Experiment 1). The second part examined how this language influence develops at different stages of language acquisition in individuals with increasing bilingual proficiency (Experiment 2). Language systematically influenced magnitude judgments such that: (a) The spoken language(s) modulated magnitude judgments presented as Arabic digits, and (b) bilinguals' progressive language mastery impacted magnitude judgments presented as number words. Taken together, the current results suggest that the order of decades and units in verbal numbers may qualitatively influence magnitude judgments in bilinguals and monolinguals, providing new insights into how number processing can be influenced by language(s).

Development of a versatile high-temperature short-time (HTST) pasteurization device for small-scale processing of cell culture medium formulations.

PubMed

Floris, Patrick; Curtin, Sean; Kaisermayer, Christian; Lindeberg, Anna; Bones, Jonathan

2018-07-01

The compatibility of CHO cell culture medium formulations with all stages of the bioprocess must be evaluated through small-scale studies prior to scale-up for commercial manufacturing operations. Here, we describe the development of a bespoke small-scale device for assessing the compatibility of culture media with a widely implemented upstream viral clearance strategy, high-temperature short-time (HTST) treatment. The thermal stability of undefined medium formulations supplemented with soy hydrolysates was evaluated upon variations in critical HTST processing parameters, namely, holding times and temperatures. Prolonged holding times of 43 s at temperatures of 110 °C did not adversely impact medium quality while significant degradation was observed upon treatment at elevated temperatures (200 °C) for shorter time periods (11 s). The performance of the device was benchmarked against a commercially available mini-pilot HTST system upon treatment of identical formulations on both platforms. Processed medium samples were analyzed by untargeted LC-MS/MS for compositional profiling followed by chemometric evaluation, which confirmed the observed degradation effects caused by elevated holding temperatures but revealed comparable performance of our developed device with the commercial mini-pilot setup. The developed device can assist medium optimization activities by reducing volume requirements relative to commercially available mini-pilot instrumentation and by facilitating fast throughput evaluation of heat-induced effects on multiple medium lots.

JOCG Aircraft/Stores Compatibility Symposium Proceedings (8th) Held in Fort Walton Beach, Florida on 23-25 October 1990

DTIC Science & Technology

1990-10-25

Compatibility Sub- Group Steering Committee Sub- Group Chairman Wiley I. Robinson Air Force Systems Command Study Group Chairmen Electrical Interface Joe...on the surface of the body organized into groups defining the corners of a series of four -sided surface panel elements which represent a faceted...Structures Technology. In the Aeroanalysis Group , Dr. Cunningham has conducted many studies leading to devel- opments in the area of analytically

L Band Service Compatibility : Part II: Optimum GPS Receiver ABI Compatibility

DOT National Transportation Integrated Search

2015-03-12

Workshop Objectives. This is the Second of Two Parts on Compatibility. Last time, OOBE. Today examine mitigation of Adjacent Band Interference, ABI. Apply Relevant TWG and NPEF (2011) data to engage compatibility analysis. Assert Principle: Dr. Brad ...

Post-zygotic sterility and cytonuclear compatibility limits in S. cerevisiae xenomitochondrial cybrids

PubMed Central

Špírek, Mário; Poláková, Silvia; Jatzová, Katarína; Sulo, Pavol

2015-01-01

Nucleo-mitochondrial interactions, particularly those determining the primary divergence of biological species, can be studied by means of xenomitochondrial cybrids, which are cells where the original mitochondria are substituted by their counterparts from related species. Saccharomyces cerevisiae cybrids are prepared simply by the mating of the ρ0 strain with impaired karyogamy and germinating spores from other Saccharomyces species and fall into three categories. Cybrids with compatible mitochondrial DNA (mtDNA) from Saccharomyces paradoxus CBS 432 and Saccharomyces cariocanus CBS 7994 are metabolically and genetically similar to cybrids containing mtDNA from various S. cerevisiae. Cybrids with mtDNA from other S. paradoxus strains, S. cariocanus, Saccharomyces kudriavzevii, and Saccharomyces mikatae require a period of adaptation to establish efficient oxidative phosphorylation. They exhibit a temperature-sensitive phenotype, slower growth rate on a non-fermentable carbon source and a long lag phase after the shift from glucose. Their decreased respiration capacity and reduced cytochrome aa3 content is associated with the inefficient splicing of cox1I3β, the intron found in all Saccharomyces species but not in S. cerevisiae. The splicing defect is compensated in cybrids by nuclear gain-of-function and can be alternatively suppressed by overexpression of MRP13 gene for mitochondrial ribosomal protein or the MRS2, MRS3, and MRS4 genes involved in intron splicing. S. cerevisiae with Saccharomyces bayanus mtDNA is unable to respire and the growth on ethanol–glycerol can be restored only after mating to some mit− strains. The nucleo-mitochondrial compatibility limit of S. cerevisiae and other Saccharomyces was set between S. kudriavzevii and S. bayanus at the divergence from S. cerevisiae about 15 MYA. The MRS1-cox1 S. cerevisiae/S. paradoxus cytonuclear Dobzhansky–Muller pair has a neglible impact on the separation of species since its imperfection is compensated for by gain-of-function mutation. PMID:25628643

Chemical Retraction Agents - in vivo and in vitro Studies into their Physico-Chemical Properties, Biocompatibility with Gingival Margin Tissues and Compatibility with Elastomer Impression Materials.

PubMed

Nowakowska, Danuta; Saczko, Jolanta; Kulbacka, Julita; Wicckiewicz, Wlodzimierz

2017-01-01

Gingival margin retraction/displacement (GMR/D) is a commonly accepted procedure in restorative dentistry. Of the various retraction methods, the chemo-mechanical approach with retraction media and chemical retraction agents (ChRAs) is mostly used. Different local and/or systemic side effects were observed after "chemical attacks" from these retraction agents. Moreover, no consensus exists as to the compatibility of chemical agents with different impression materials. This paper reports the findings of in vivo and in vitro studies and we discuss the physico-chemical properties of chemical retraction agents, their undesirable clinical side effects, biological activity and compatibility with selected groups of elastomer impression materials. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

A study on contraction of pneumatic artificial muscle (PAM) for load-lifting

NASA Astrophysics Data System (ADS)

Najmuddin, W. S. W. A.; Mustaffa, M. T.

2017-10-01

Pneumatic Artificial Muscles (PAMs) have been known for its wide application in various aspects of industrial automation and robotic equipments. Many advantages in terms of high power-to-volume ratio, high power-to-weight ratio, stick-slip-free operation and high degree of safety offer by PAM compare to traditional actuators. However, behind this benefits lie a limitation of significant compatibility of PAM mechanism which have to be considered so as to fully understand how the PAM works during load-lifting. In this study, the mesh suitability experiment and the effect of force load on PAM contraction experiment have been carried out. PAM is constructed and compatibility of bladder and the braided mesh to produce uniform expansion is investigated. Moreover, the first experimental result of finding compatibility is used to verify the contraction value under various loads.

Space construction system analysis study: Project systems and missions descriptions

NASA Technical Reports Server (NTRS)

1979-01-01

Three project systems are defined and summarized. The systems are: (1) a Solar Power Satellite (SPS) Development Flight Test Vehicle configured for fabrication and compatible with solar electric propulsion orbit transfer; (2) an Advanced Communications Platform configured for space fabrication and compatible with low thrust chemical orbit transfer propulsion; and (3) the same Platform, configured to be space erectable but still compatible with low thrust chemical orbit transfer propulsion. These project systems are intended to serve as configuration models for use in detailed analyses of space construction techniques and processes. They represent feasible concepts for real projects; real in the sense that they are realistic contenders on the list of candidate missions currently projected for the national space program. Thus, they represent reasonable configurations upon which to base early studies of alternative space construction processes.

Project FIRES. Volume 4: Prototype Protective Ensemble Qualification Test Report, Phase 1B

NASA Technical Reports Server (NTRS)

Abeles, F. J.

1980-01-01

The qualification testing of a prototype firefighter's protective ensemble is documented. Included are descriptions of the design requirements, the testing methods, and the test apparatus. The tests include measurements of individual subsystem characteristics in areas relating to both physical testing, such as heat, flame, impact penetration and human factors testing, such as dexterity, grip, and mobility. Also, measurements related to both physical and human factors testing of the complete ensemble, such as water protection, metabolic expenditures, and compatibility are considered.

The 1985 Army Experience Survey. Data Sourcebook and User’s Manual

DTIC Science & Technology

1986-01-01

on the survey data file produced for the 1985 AES.- 4 The survey data are available in Operating System (OS) as well as Statistical Analysis System ...version of the survey data files was produced using the Statistical Analysis System (SASJ. The survey data were also produced in Operating System (OS...impacts upon future enlistments. In order iThe OS data file was designed to make the survey data accessible on any IBM-compatible computer system . 3 N’ to

Criterion for Estimation of Ecological Safety of Objects of Urban Transport Construction

NASA Astrophysics Data System (ADS)

Bakaeva, N. V.; Chernyaeva, I. V.

2017-11-01

A new approach to assess the ecological safety of the urban environment including urban transport facilities is being considered. The chemical and acoustic pollution of the environment from the impact of the urban transport construction objects is analyzed. The description of the sustainable state concept and ecological balance of the urban environment is given. A criterion for assessing environmental safety based on a comprehensive indicator of the city’s biosphere compatibility was proposed. The scale of environmental safety assessments is constructed.

A METHOD FOR DETERMINING THE COMPATIBILITY OF HAZARDOUS WASTES

EPA Science Inventory

This report describes a method for determining the compatibility of the binary combinations of hazardous wastes. The method consists of two main parts, namely: (1) the step-by-step compatibility analysis procedures, and (2) the hazardous wastes compatibility chart. The key elemen...

Greek-Cypriot Teachers' Perceptions of Religious Education and Its Contribution to Peace: Perspectives of (In)compatibility in a Divided Society

ERIC Educational Resources Information Center

Loukaidis, Loizos; Zembylas, Michalinos

2017-01-01

This paper explores the ways in which a group of primary school teachers in Cyprus interprets religious education and its contribution to peace. In particular, this phenomenological exploratory study: first, examines how teachers perceive religious education and whether this conceptualization is considered to be (in)compatible with peace in the…

The Compatibility of Developed Mathematics Textbooks' Content in Saudi Arabia (Grades 6-8) with NCTM Standards

ERIC Educational Resources Information Center

Alshehri, Mohammed Ali; Ali, Hassan Shawki

2016-01-01

This study aimed to investigate the compatibility of developed mathematics textbooks' content (grades 6-8) in Saudi Arabia with NCTM standards in the areas of: number and operations, algebra, geometry, measurement, data analysis and probability. To achieve that goal, a list of (NCTM) standards for grades (6-8) were translated to Arabic language,…

On the Development of the Mental Number Line: More, Less, or Never Holistic with Increasing Age?

ERIC Educational Resources Information Center

Nuerk, Hans-Christoph; Kaufmann, Liane; Zoppoth, Sabine; Willmes, Klaus

2004-01-01

Magnitude is assumed to be represented along a holistic mental number line in adults. However, the authors recently observed a unit-decade compatibility effect for 2-digit numbers that is inconsistent with this "holisticness" assumption (H.-C. Nuerk, U. Weger, & K. Willmes, 2001). This study used the compatibility effect to examine whether the…

Could We Make Diverse Learning Materials Compatible with E-Readers Used in Classroom Learning Settings?

ERIC Educational Resources Information Center

Young, Shelley Shwu-Ching; Lin, Wei-Lin

2012-01-01

This study explores how to make diverse learning/instructional materials compatible with e-readers when the instructor pioneered to adopt e-readers into a course of the graduate level. What problems did the instructor encounter when she used the e-readers as a major tool to deliver learning contents, such as the process of converting the…

Utility of the 3Di Short Version for the Diagnostic Assessment of Autism Spectrum Disorder and Compatibility with DSM-5

ERIC Educational Resources Information Center

Slappendel, Geerte; Mandy, William; van der Ende, Jan; Verhulst, Frank C.; van der Sijde, Ad; Duvekot, Jorieke; Skuse, David; Greaves-Lord, Kirstin

2016-01-01

The Developmental Diagnostic Dimensional Interview-short version (3Di-sv) provides a brief standardized parental interview for diagnosing autism spectrum disorder (ASD). This study explored its validity, and compatibility with DSM-5 ASD. 3Di-sv classifications showed good sensitivity but low specificity when compared to ADOS-2-confirmed clinical…

Mirror neuron activation as a function of explicit learning: changes in mu-event-related power after learning novel responses to ideomotor compatible, partially compatible, and non-compatible stimuli.

PubMed

Behmer, Lawrence P; Fournier, Lisa R

2016-11-01

Questions regarding the malleability of the mirror neuron system (MNS) continue to be debated. MNS activation has been reported when people observe another person performing biological goal-directed behaviors, such as grasping a cup. These findings support the importance of mapping goal-directed biological behavior onto one's motor repertoire as a means of understanding the actions of others. Still, other evidence supports the Associative Sequence Learning (ASL) model which predicts that the MNS responds to a variety of stimuli after sensorimotor learning, not simply biological behavior. MNS activity develops as a consequence of developing stimulus-response associations between a stimulus and its motor outcome. Findings from the ideomotor literature indicate that stimuli that are more ideomotor compatible with a response are accompanied by an increase in response activation compared to less compatible stimuli; however, non-compatible stimuli robustly activate a constituent response after sensorimotor learning. Here, we measured changes in the mu-rhythm, an EEG marker thought to index MNS activity, predicting that stimuli that differ along dimensions of ideomotor compatibility should show changes in mirror neuron activation as participants learn the respective stimulus-response associations. We observed robust mu-suppression for ideomotor-compatible hand actions and partially compatible dot animations prior to learning; however, compatible stimuli showed greater mu-suppression than partially or non-compatible stimuli after explicit learning. Additionally, non-compatible abstract stimuli exceeded baseline only after participants explicitly learned the motor responses associated with the stimuli. We conclude that the empirical differences between the biological and ASL accounts of the MNS can be explained by Ideomotor Theory. © 2016 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

Lesson plan profile of senior high school biology teachers in Subang

NASA Astrophysics Data System (ADS)

Rohayati, E.; Diana, S. W.; Priyandoko, D.

2018-05-01

Lesson plan have important role for biology teachers in teaching and learning process. The aim of this study was intended to gain an overview of lesson plan of biology teachers’ at Senior High Schools in Subang which were the members of biology teachers association in Subang. The research method was descriptive method. Data was collected from 30 biology teachers. The result of study showed that lesson plan profile in terms of subject’s identity had good category with 83.33 % of average score. Analysis on basic competence in fair category with 74.45 % of average score. The compatibility of method/strategy was in fair category with average score 72.22 %. The compatibility of instrument, media, and learning resources in fair category with 71.11 % of average score. Learning scenario was in good category with 77.00 % of average score. The compatibility of evaluation was in low category with 56.39 % of average score. It can be concluded that biology teachers in Subang were good enough in making lesson plan, however in terms of the compatibility of evaluation needed to be fixed. Furthermore, teachers’ training for biology teachers’ association was recommended to increasing teachers’ skill to be professional teachers.

The quality of social relationships in ravens

PubMed Central

Fraser, Orlaith N.; Bugnyar, Thomas

2015-01-01

The quality of a social relationship represents the history of past social interactions between two individuals, from which the nature and outcome of future interactions can be predicted. Current theory predicts that relationship quality comprises three separate components, its value, compatibility and security. This study is the first to investigate the components of relationship quality in a large-brained bird. Following methods recently used to obtain quantitative measures of each relationship quality component in chimpanzees, Pan troglodytes, we entered data on seven behavioural variables from a group of 11 ravens, Corvus corax, into a principal components analysis. The characteristics of the extracted components matched those predicted for value, compatibility and security, and were labelled as such. When the effects of kinship and sex combination on each relationship quality component were analysed, we found that kin had more valuable relationships, whereas females had less secure and compatible relationships, although the effect of sex combination on compatibility only applied to nonkin. These patterns are consistent with what little knowledge we have of raven relationships from aviary studies and show that the components of relationship quality in ravens may indeed be analogous to those in chimpanzees. PMID:25821236

Permanganate gel (PG) for groundwater remediation: compatibility, gelation, and release characteristics.

PubMed

Lee, Eung Seok; Olson, Pamela R; Gupta, Neha; Solpuker, Utku; Schwartz, Franklin W; Kim, Yongje

2014-02-01

Permanganate (MnO4(-)) is a strong oxidant that is widely used for treating chlorinated ethylenes in groundwater. This study aims to develop hyper-saline MnO4(-) solution (MnO4(-) gel; PG) that can be injected into aquifers via wells, slowly gelates over time, and slowly release MnO4(-) to flowing water. In this study, compatibility and miscibility of gels, such as chitosan, aluminosilicate, silicate, and colloidal silica gels, with MnO4(-) were tested. Of these gels, chitosan was reactive with MnO4(-). Aluminosilicates were compatible but not readily miscible with MnO4(-). Silicates and colloidal silica were both compatible and miscible with MnO4(-), and gelated with addition of KMnO4 granules. Colloidal silica has low initial viscosity (<15cP), exhibited delayed gelation characteristics with the lag times ranging from 0 to 200min. Release of MnO4(-) from the colloidal silica-based PG gel occurred in a delayed fashion, with maximum duration of 24h. These results suggested that colloidal silica can be used to create PG or delayed-gelling forms containing other oxidants which can be used for groundwater remediation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Studies of material and process compatibility in developing compact silicon vapor chambers

NASA Astrophysics Data System (ADS)

Cai, Qingjun; Bhunia, Avijit; Tsai, Chialun; Kendig, Martin W.; DeNatale, Jeffrey F.

2013-06-01

The performance and long-term reliability of a silicon vapor chamber (SVC) developed for thermal management of high-power electronics critically depend on compatibility of the component materials. A hermetically sealed SVC presented in this paper is composed of bulk silicon, glass-frit as a bonding agent, lead/tin solder as an interface sealant and a copper charging tube. These materials, in the presence of a water/vapor environment, may chemically react and release noncondensable gas (NCG), which can weaken structural strength and degrade the heat transfer performance with time. The present work reports detailed studies on chemical compatibility of the components and potential solutions to avoid the resulting thermal performance degradation. Silicon surface oxidation and purification of operating liquid are necessary steps to reduce performance degradation in the transient period. A lead-based solder with its low reflow temperature is found to be electrochemically stable in water/vapor environment. High glazing temperature solidifies molecular bonding in glass-frit and mitigates PbO precipitation. Numerous liquid flushes guarantee removal of chemical residual after the charging tube is soldered to SVC. With these improvements on the SVC material and process compatibility, high effective thermal conductivity and steady heat transfer performance are obtained.

Compatibility and infectivity of a Cercospora rodmanii formulation with enhancing agents. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pennington, J.C.; Theriot, E.A.

1983-06-01

A formulation of the fungus Cercospora rodmanii Conway has been produced, as a biocontrol of waterhyacinth (Eichhornia crassipes (Mart.) Solms.). To ensure the most efficient germination of the formulation, 12 potential enhancing agents were tested for addition during the spray application. The agents were aspartic acid, glucose, glutamic acid, gum xanthan, nutrient agar, Ortho X-77 Spreader, Tween 20, Tween 60, Tween 80, sodium alginate, Super Slupper, and yeast extract. Compatibility of test agents and combinations of test agents with two lots of the formulation was determined in the laboratory. All combinations of test agents were compatible with both lots ofmore » the C. rodmanii formulation. The C. rodmanii formulation was sprayed with test agents on waterhyacinth pseudolaminae. Damage was monitored each week for 8 weeks by assigning a disease index to each original and new pseudolaminae. No spots having characteristics suggestive of C. rodmanii infection were observed at any time during the study. Lack of infectivity could be remedied by isolating a virulent strain of C. rodmanii from the field. Agents determined to be compatible in this study could then be reexamined for enhancing infectivity on a virulent C. rodmanii formulation. 14 references, 2 figures, 5 tables.« less

Deciphering the Theobroma cacao self-incompatibility system: from genomics to diagnostic markers for self-compatibility.

PubMed

Lanaud, Claire; Fouet, Olivier; Legavre, Thierry; Lopes, Uilson; Sounigo, Olivier; Eyango, Marie Claire; Mermaz, Benoit; Da Silva, Marcos Ramos; Loor Solorzano, Rey Gaston; Argout, Xavier; Gyapay, Gabor; Ebaiarrey, Herman Ebai; Colonges, Kelly; Sanier, Christine; Rivallan, Ronan; Mastin, Géraldine; Cryer, Nicholas; Boccara, Michel; Verdeil, Jean-Luc; Efombagn Mousseni, Ives Bruno; Peres Gramacho, Karina; Clément, Didier

2017-10-13

Cocoa self-compatibility is an important yield factor and has been described as being controlled by a late gameto-sporophytic system expressed only at the level of the embryo sac. It results in gametic non-fusion and involves several loci. In this work, we identified two loci, located on chromosomes 1 and 4 (CH1 and CH4), involved in cocoa self-incompatibility by two different processes. Both loci are responsible for gametic selection, but only one (the CH4 locus) is involved in the main fruit drop. The CH1 locus acts prior to the gamete fusion step and independently of the CH4 locus. Using fine-mapping and genome-wide association studies, we focused analyses on restricted regions and identified candidate genes. Some of them showed a differential expression between incompatible and compatible reactions. Immunolocalization experiments provided evidence of CH1 candidate genes expressed in ovule and style tissues. Highly polymorphic simple sequence repeat (SSR) diagnostic markers were designed in the CH4 region that had been identified by fine-mapping. They are characterized by a strong linkage disequilibrium with incompatibility alleles, thus allowing the development of efficient diagnostic markers predicting self-compatibility and fruit setting according to the presence of specific alleles or genotypes. SSR alleles specific to self-compatible Amelonado and Criollo varieties were also identified, thus allowing screening for self-compatible plants in cocoa populations. © The Author 2017. Published by Oxford University Press on behalf of the Society for Experimental Biology.

Brain-Compatible Learning: Principles and Applications in Athletic Training

PubMed Central

2003-01-01

Objective: To discuss the principles of brain-compatible learning research and provide insights into how this research may be applied in athletic training education to benefit the profession. Background: In the past decade, new brain-imaging techniques have allowed us to observe the brain while it is learning. The field of neuroscience has produced a body of empirical data that provides a new understanding of how we learn. This body of data has implications in education, although the direct study of these implications is in its infancy. Description: An overview of how the brain learns at a cellular level is provided, followed by a discussion of the principles of brain-compatible learning. Applications of these principles and implications for the field of athletic training education are also offered. Application: Many educational-reform fads have garnered attention in the past. Brain-compatible learning will not likely be one of those, as its origin is in neuroscience, not education. Brain-compatible learning is not an educational-reform movement. It does not prescribe how to run your classroom or offer specific techniques to use. Rather, it provides empirical data about how the brain learns and suggests guidelines to be considered while preparing lessons for your students. These guidelines may be incorporated into every educational setting, with every type of curriculum and every age group. The field of athletic training lends itself well to many of the basic principles of brain-compatible learning. PMID:16558681

The influence of atomic alignment on absorption and emission spectroscopy

NASA Astrophysics Data System (ADS)

Zhang, Heshou; Yan, Huirong; Richter, Philipp

2018-06-01

Spectroscopic observations play essential roles in astrophysics. They are crucial for determining physical parameters in the universe, providing information about the chemistry of various astronomical environments. The proper execution of the spectroscopic analysis requires accounting for all the physical effects that are compatible to the signal-to-noise ratio. We find in this paper the influence on spectroscopy from the atomic/ground state alignment owing to anisotropic radiation and modulated by interstellar magnetic field, has significant impact on the study of interstellar gas. In different observational scenarios, we comprehensively demonstrate how atomic alignment influences the spectral analysis and provide the expressions for correcting the effect. The variations are even more pronounced for multiplets and line ratios. We show the variation of the deduced physical parameters caused by the atomic alignment effect, including alpha-to-iron ratio ([X/Fe]) and ionisation fraction. Synthetic observations are performed to illustrate the visibility of such effect with current facilities. A study of PDRs in ρ Ophiuchi cloud is presented to demonstrate how to account for atomic alignment in practice. Our work has shown that due to its potential impact, atomic alignment has to be included in an accurate spectroscopic analysis of the interstellar gas with current observational capability.

Breeding bird response to cattle grazing of a cottonwood bottomland

USGS Publications Warehouse

Sedgwick, James A.; Knopf, Fritz L.

1987-01-01

We studied avian habitat relationships and the impact of grazing on breeding densities of selected migratory birds in a plains cottonwood (Populus sargentii) bottomland in northeastern Colorado. Five 16-ha plots served as controls and 5 were fenced and fall-grazed October-November 1982-84 following a season of pre-treatment study in the spring of 1982. We focused our analysis on bird species directly dependent on the grass-herb-shrub layer of vegetation for foraging, nesting, or both. The guild included house wren (Troglodytes aedon), brown thrasher (Toxostoma rufum), American robin (Turdus migratorius), common yellowthroat (Geothlypis trichas), yellow-breasted chat (Icteria virens), and rufous-sided towhee (Pipilo erythropthalmus). Moderate, late-fall grazing had no detectable impact on calculated densities of any of the 6 species, implying that proper seasonal grazing of a cottonwood floodplain is, at least initially (3 years), compatible with migratory bird use of a site for breeding. Habitat associations suggested that common yellowthroats and yellow-breasted chats were most unique and most likely to respond negatively to higher levels of grazing. We suggest that these latter 2 species are appropriate ecological indicators of the quality of ground-shrub vegetation as breeding bird habitats in lowland floodplains of the Great Plains.

Leishmaniasis and Climate Change—Case Study: Argentina

PubMed Central

Salomón, Oscar Daniel; Quintana, María Gabriela; Mastrángelo, Andrea Verónica; Fernández, María Soledad

2012-01-01

Vector-borne diseases closely associated with the environment, such as leishmaniases, have been a usual argument about the deleterious impact of climate change on public health. From the biological point of view interaction of different variables has different and even conflicting effects on the survival of vectors and the probability transmission of pathogens. The results on ecoepidemiology of leishmaniasis in Argentina related to climate variables at different scales of space and time are presented. These studies showed that the changes in transmission due to change or increase in frequency and intensity of climatic instability were expressed through changes in the probability of vector-human reservoir effective contacts. These changes of contact in turn are modulated by both direct effects on the biology and ecology of the organisms involved, as by perceptions and changes in the behavior of the human communities at risk. Therefore, from the perspective of public health and state policy, and taking into account the current nonlinear increased velocity of climate change, we concluded that discussing the uncertainties of large-scale models will have lower impact than to develop-validate mitigation strategies to be operative at local level, and compatibles with sustainable development, conservation biodiversity, and respect for cultural diversity. PMID:22685477

A Study of Gamma-Ray Exposure of Cu-SiO2 Programmable Metallization Cells

NASA Astrophysics Data System (ADS)

Chen, W.; Barnaby, H. J.; Kozicki, M. N.; Edwards, A. H.; Gonzalez-Velo, Y.; Fang, R.; Holbert, K. E.; Yu, S.; Yu, W.

2015-12-01

The Cu-SiO2 based programmable metallization cell (PMC) is a promising alternative to the Ag-chalcogenide glass PMC because of its low power consumption and CMOS-compatibility. Understanding its total ionizing dose (TID) response helps in assessing the reliability of this technology in ionizing radiation environments and benefits its expansion in the space electronics market. In this paper, the impacts of TID on the switching characteristics of Cu-SiO2 PMC are investigated for the first time. The devices were step irradiated with 60Co gamma-rays to a maximum dose of 7.1 Mrad ( SiO2). The results show that gamma-ray irradiation has a negligible impact on the virgin-state and on-state resistance of Cu-SiO2 PMCs. The off-state resistance slightly decreases after the first 1.5 Mrad( SiO2) of exposure, but this reduction saturates after higher levels of TID. Other switching characteristics such as the set voltage, multilevel switching capability and endurance were also studied, all of which did not show observable changes after gamma-ray radiation. The immunity to ionizing radiation is attributed to the suppression of the photo-doping process.

The Catastrophe Revisited

PubMed Central

Ratner, Buddy D.

2007-01-01

The biomaterials community has been unable to accurately assign the term “blood compatible” to a biomaterial in spite of 50 years of intensive research on the subject. There is no clear consensus as to which materials are “blood compatible.” There are no standardized methods to assess blood compatibility. Since we use millions of devices in contact with blood each year, it is imperative we give serious thought to this intellectual catastrophe. In this perspective, I consider five hypotheses as to why progress has been slow in evolving a clear understanding of blood compatibility: Hypothesis 1 -- It is impossible to make a blood compatible material. Hypothesis 2 -- We do not understand the biology behind blood compatibility. Hypothesis 3 -- We do not understand how to test for or evaluate blood compatibility. Hypothesis 4 -- Certain materials of natural origin seem to show better blood compatibility but we do not know how to exploit this concept. Hypothesis 5 -- We now have better blood compatible materials but the regulatory and economic climate prevent adoption in clinical practice. PMID:17689608

Chicxulub impact basin: Gravity characteristics and implications for basin morphology and deep structure

NASA Technical Reports Server (NTRS)

Sharpton, Virgil L.; Burke, Kevin; Hall, Stuart A.; Lee, Scott; Marin, Luis E.; Suarez, Gerardo; Quezada-Muneton, Juan Manuel; Urrutia-Fucugauchi, Jaime

1993-01-01

The K-T-aged Chicxulub Impact Structure is buried beneath the Tertiary carbonate rocks of the Northern Yucatan Platform. Consequently its morphology and structure are poorly understood. Reprocessed Bouguer (onshore) and Free Air (offshore) gravity data over Northern Yucatan reveal that Chicxulub may be a 200-km-diameter multi-ring impact basin with at least three concentric basin rings. The positions of these rings follow the square root of 2 spacing rule derived empirically from analysis of multi-ring basins on other planets indicating that these rings probably correspond to now-buried topographic basin rings. A forward model of the gravity data along a radial transect from the southwest margin of the structure indicates that the Chicxulub gravity signature is compatible with this interpretation. We estimate the basin rim diameter to be 204 +/- 16 km and the central peak ring diameter (D) is 104 +/- 6 km.

Remotely Operated Aircraft (ROA) Impact on the National Airspace System (NAS) Work Package: Automation Impacts of ROA's in the NAS

NASA Technical Reports Server (NTRS)

2005-01-01

The purpose of this document is to analyze the impact of Remotely Operated Aircraft (ROA) operations on current and planned Air Traffic Control (ATC) automation systems in the En Route, Terminal, and Traffic Flow Management domains. The operational aspects of ROA flight, while similar, are not entirely identical to their manned counterparts and may not have been considered within the time-horizons of the automation tools. This analysis was performed to determine if flight characteristics of ROAs would be compatible with current and future NAS automation tools. Improvements to existing systems / processes are recommended that would give Air Traffic Controllers an indication that a particular aircraft is an ROA and modifications to IFR flight plan processing algorithms and / or designation of airspace where an ROA will be operating for long periods of time.

“FRIED EGG”: AN OCEANIC IMPACT CRATER IN THE MID-ATLANTIC?

NASA Astrophysics Data System (ADS)

Dias, F. C.; Lourenco, N.; Lobo, A.; Santos de Campos, A.; Pinto de Abreu, M.

2009-12-01

Analysis of a multibeam echosounder hydrographic survey performed in the Southern Azores Platform under the scope of the Portuguese Continental Shelf Project has revealed a large scale bathymetric structure nicknamed “Fried Egg” due to its well defined morphology. Laying at about 2km depth, this structure consists of a roughly circular 6km wide depression 110m below the surrounding ocean bottom, with a circular dome shaped central uplift 3km in diameter and with a base to top height of 300m. The associated backscatter signal presents a distinctive ring-like signature corresponding to the lower flank section of the dome, suggesting the outcrop of hard rock material. The remaining backscatter signal seems to correspond to widespread sediments. No lava flows are apparent either within the structure or on its surroundings. All these properties are compatible with the record of terrestrial impact craters, thus making of “Fried Egg” a potential oceanic impact crater.

The influence of a major sporting event upon emergency department attendances; A retrospective cross-national European study.

PubMed

Hughes, Helen E; Colón-González, Felipe J; Fouillet, Anne; Elliot, Alex J; Caserio-Schonemann, Céline; Hughes, Thomas C; Gallagher, Naomh; Morbey, Roger A; Smith, Gillian E; Thomas, Daniel Rh; Lake, Iain R

2018-01-01

Major sporting events may influence attendance levels at hospital emergency departments (ED). Previous research has focussed on the impact of single games, or wins/losses for specific teams/countries, limiting wider generalisations. Here we explore the impact of the Euro 2016 football championships on ED attendances across four participating nations (England, France, Northern Ireland, Wales), using a single methodology. Match days were found to have no significant impact upon daily ED attendances levels. Focussing upon hourly attendances, ED attendances across all countries in the four hour pre-match period were statistically significantly lower than would be expected (OR 0.97, 95% CI 0.94-0.99) and further reduced during matches (OR 0.94, 95% CI 0.91-0.97). In the 4 hour post-match period there was no significant increase in attendances (OR 1.01, 95% CI 0.99-1.04). However, these impacts were highly variable between individual matches: for example in the 4 hour period following the final, involving France, the number of ED attendances in France increased significantly (OR 1.27, 95% CI 1.13-1.42). Overall our results indicate relatively small impacts of major sporting events upon ED attendances. The heterogeneity observed makes it difficult for health providers to predict how major sporting events may affect ED attendances but supports the future development of compatible systems in different countries to support cross-border public health surveillance.

The influence of a major sporting event upon emergency department attendances; A retrospective cross-national European study

PubMed Central

Colón-González, Felipe J.; Fouillet, Anne; Elliot, Alex J.; Caserio-Schonemann, Céline; Hughes, Thomas C.; Gallagher, Naomh; Morbey, Roger A.; Smith, Gillian E.; Thomas, Daniel Rh.; Lake, Iain R.

2018-01-01

Major sporting events may influence attendance levels at hospital emergency departments (ED). Previous research has focussed on the impact of single games, or wins/losses for specific teams/countries, limiting wider generalisations. Here we explore the impact of the Euro 2016 football championships on ED attendances across four participating nations (England, France, Northern Ireland, Wales), using a single methodology. Match days were found to have no significant impact upon daily ED attendances levels. Focussing upon hourly attendances, ED attendances across all countries in the four hour pre-match period were statistically significantly lower than would be expected (OR 0.97, 95% CI 0.94–0.99) and further reduced during matches (OR 0.94, 95% CI 0.91–0.97). In the 4 hour post-match period there was no significant increase in attendances (OR 1.01, 95% CI 0.99–1.04). However, these impacts were highly variable between individual matches: for example in the 4 hour period following the final, involving France, the number of ED attendances in France increased significantly (OR 1.27, 95% CI 1.13–1.42). Overall our results indicate relatively small impacts of major sporting events upon ED attendances. The heterogeneity observed makes it difficult for health providers to predict how major sporting events may affect ED attendances but supports the future development of compatible systems in different countries to support cross-border public health surveillance. PMID:29898000

Energy from Biomass for Sustainable Cities

NASA Astrophysics Data System (ADS)

Panepinto, D.; Zanetti, M. C.; Gitelman, L.; Kozhevnikov, M.; Magaril, E.; Magaril, R.

2017-06-01

One of the major challenges of sustainable urban development is ensuring a sustainable energy supply while minimizing negative environmental impacts. The European Union Directive 2009/28/EC has set a goal of obtaining 20 percent of all energy from renewable sources by 2020. In this context, it is possible to consider the use of residues from forest maintenance, residues from livestock, the use of energy crops, the recovery of food waste, and residuals from agro-industrial activities. At the same time, it is necessary to consider the consequent environmental impact. In this paper an approach in order to evaluate the environmental compatibility has presented. The possibilities of national priorities for commissioning of power plants on biofuel and other facilities of distributed generation are discussed.

Inheritance of graft compatibility in Douglas fir.

Treesearch

D.L. Copes

1973-01-01

Graft compatibility of genetically related and unrelated rootstock-scion combinations was compared. Scion clones were 75% compatible when grafted on half-related rootstocks but only 56% compatible when grafted on unrelated rootstocks. Most variance associated with graft incompatibility in Douglas-fir appears to be caused by multiple genes.

Design and installation of a ferromagnetic wall in tokamak geometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, P. E., E-mail: peh2109@columbia.edu; Levesque, J. P.; Rivera, N.

Low-activation ferritic steels are leading material candidates for use in next-generation fusion development experiments such as a prospective component test facility and DEMO power reactor. Understanding the interaction of plasmas with a ferromagnetic wall will provide crucial physics for these facilities. In order to study ferromagnetic effects in toroidal geometry, a ferritic wall upgrade was designed and installed in the High Beta Tokamak–Extended Pulse (HBT-EP). Several material options were investigated based on conductivity, magnetic permeability, vacuum compatibility, and other criteria, and the material of choice (high-cobalt steel) is characterized. Installation was accomplished quickly, with minimal impact on existing diagnostics andmore » overall machine performance, and initial results demonstrate the effects of the ferritic wall on plasma stability.« less

Investigating Climate Compatible Development Outcomes and their Implications for Distributive Justice: Evidence from Malawi

NASA Astrophysics Data System (ADS)

Wood, Benjamin T.; Quinn, Claire H.; Stringer, Lindsay C.; Dougill, Andrew J.

2017-09-01

Governments and donors are investing in climate compatible development in order to reduce climate and development vulnerabilities. However, the rate at which climate compatible development is being operationalised has outpaced academic enquiry into the concept. Interventions aiming to achieve climate compatible development "wins" (for development, mitigation, adaptation) can also create negative side-effects. Moreover, benefits and negative side-effects may differ across time and space and have diverse consequences for individuals and groups. Assessments of the full range of outcomes created by climate compatible development projects and their implications for distributive justice are scarce. This article develops a framework using a systematic literature review that enables holistic climate compatible development outcome evaluation over seven parameters identified. Thereafter, we explore the outcomes of two donor-funded projects that pursue climate compatible development triple-wins in Malawi using this framework. Household surveys, semi-structured interviews and documentary material are analysed. Results reveal that uneven outcomes are experienced between stakeholder groups and change over time. Although climate compatible development triple-wins can be achieved through projects, they do not represent the full range of outcomes. Ecosystem—and community-based activities are becoming popularised as approaches for achieving climate compatible development goals. However, findings suggest that a strengthened evidence base is required to ensure that these approaches are able to meet climate compatible development goals and further distributive justice.

Transfer of learning in choice reactions: The roles of stimulus type, response mode, and set-level compatibility.

PubMed

Yamaguchi, Motonori; Chen, Jing; Proctor, Robert W

2015-08-01

The Simon effect refers to the advantage of responding to spatially compatible stimuli. This effect can be eliminated or even reversed to favor spatially incompatible stimuli after participants practice a choice-reaction task with spatially incompatible mappings (e.g., pressing left and right keys to stimuli on the right and left, respectively). This transfer of incompatible spatial associations has been observed under conditions in which responses were made manually (e.g., keypresses, moving a joystick). The present study used vocal responses to reveal the primary determinants of the transfer effect, dissociating the influences of stimulus type, response mode, and their interaction (set-level compatibility). The results suggest that contextual match between the practice and transfer tasks with respect to stimulus type and response mode determined transfer of incompatible associations to the Simon task, and stimulus type determined the efficiency of acquiring new associations. However, there was little evidence that set-level compatibility plays any major role in either acquisition or transfer of spatial associations.

Further Exploring the Potential for Assimilation of Unmanned Aircraft Observations to Benefit Hurricane Analyses and Forecasts

NASA Technical Reports Server (NTRS)

Sippel, Jason A.; Zhang, Fuqing; Weng, Yonghui; Braun, Scott A.; Cecil, Daniel J.

2015-01-01

This study explores the potential of assimilating data from multiple instruments onboard high-altitude, long-endurance unmanned aircraft to improve hurricane analyses and forecasts. A recent study found a significant positive impact on analyses and forecasts of Hurricane Karl when an ensemble Kalman filter was used to assimilate data from the High-altitude Imaging Wind and Rain Airborne Profiler (HIWRAP), a new Doppler radar onboard the NASA Global Hawk (GH) unmanned airborne system. The GH can also carry other useful instruments, including dropsondes and the Hurricane Imaging Radiometer (HIRAD), which is a new radiometer that estimates large swaths of wind speeds and rainfall at the ocean surface. The primary finding is that simultaneously assimilating data from HIWRAP and the other GH-compatible instruments results in further analysis and forecast improvement for Karl. The greatest improvement comes when HIWRAP, HIRAD, and dropsonde data are simultaneously assimilated.

Application of microorganisms in concrete: a promising sustainable strategy to improve concrete durability.

PubMed

Wang, Jianyun; Ersan, Yusuf Cagatay; Boon, Nico; De Belie, Nele

2016-04-01

The beneficial effect of microbially induced carbonate precipitation on building materials has been gradually disclosed in the last decade. After the first applications of on historical stones, promising results were obtained with the respect of improved durability. An extensive study then followed on the application of this environmentally friendly and compatible material on a currently widely used construction material, concrete. This review is focused on the discussion of the impact of the two main applications, bacterial surface treatment and bacteria based crack repair, on concrete durability. Special attention was paid to the choice of suitable bacteria and the metabolic pathway aiming at their functionality in concrete environment. Interactions between bacterial cells and cementitious matrix were also elaborated. Furthermore, recommendations to improve the effectiveness of bacterial treatment are provided. Limitations of current studies, updated applications and future application perspectives are shortly outlined.

Engineering of the chemical reactivity of the Ti/HfO₂ interface for RRAM: experiment and theory.

PubMed

Calka, Pauline; Sowinska, Malgorzata; Bertaud, Thomas; Walczyk, Damian; Dabrowski, Jarek; Zaumseil, Peter; Walczyk, Christian; Gloskovskii, Andrei; Cartoixà, Xavier; Suñé, Jordi; Schroeder, Thomas

2014-04-09

The Ti/HfO2 interface plays a major role for resistance switching performances. However, clear interface engineering strategies to achieve reliable and reproducible switching have been poorly investigated. For this purpose, we present a comprehensive study of the Ti/HfO2 interface by a combined experimental-theoretical approach. Based on the use of oxygen-isotope marked Hf*O2, the oxygen scavenging capability of the Ti layer is clearly proven. More importantly, in line with ab initio theory, the combined HAXPES-Tof-SIMS study of the thin films deposited by MBE clearly establishes a strong impact of the HfO2 thin film morphology on the Ti/HfO2 interface reactivity. Low-temperature deposition is thus seen as a RRAM processing compatible way to establish the critical amount of oxygen vacancies to achieve reproducible and reliable resistance switching performances.

46 CFR 150.150 - Exceptions to the compatibility chart.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Exceptions to the compatibility chart. 150.150 Section 150.150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES § 150.150 Exceptions to the compatibility chart. The Commandant (G-MSO...

46 CFR Figure 1 to Part 150 - Compatibility Chart

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079 ...

46 CFR Figure 1 to Part 150 - Compatibility Chart

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079 ...

46 CFR Figure 1 to Part 150 - Compatibility Chart

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079 ...

46 CFR Figure 1 to Part 150 - Compatibility Chart

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079 ...

46 CFR 150.150 - Exceptions to the compatibility chart.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Exceptions to the compatibility chart. 150.150 Section 150.150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES § 150.150 Exceptions to the compatibility chart. The Commandant (CG-ENG-5...

46 CFR Figure 1 to Part 150 - Compatibility Chart

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079 ...

46 CFR 150.150 - Exceptions to the compatibility chart.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Exceptions to the compatibility chart. 150.150 Section 150.150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES § 150.150 Exceptions to the compatibility chart. The Commandant (CG-ENG-5...

46 CFR 150.150 - Exceptions to the compatibility chart.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Exceptions to the compatibility chart. 150.150 Section 150.150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES § 150.150 Exceptions to the compatibility chart. The Commandant (G-MSO...

46 CFR 150.150 - Exceptions to the compatibility chart.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Exceptions to the compatibility chart. 150.150 Section 150.150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES § 150.150 Exceptions to the compatibility chart. The Commandant (CG-ENG-5...

Are Automatic Imitation and Spatial Compatibility Mediated by Different Processes?

ERIC Educational Resources Information Center

Cooper, Richard P.; Catmur, Caroline; Heyes, Cecilia

2013-01-01

Automatic imitation or "imitative compatibility" is thought to be mediated by the mirror neuron system and to be a laboratory model of the motor mimicry that occurs spontaneously in naturalistic social interaction. Imitative compatibility and spatial compatibility effects are known to depend on different stimulus dimensions--body…

The Effect of Birth Order on Roommate Compatibility

ERIC Educational Resources Information Center

Schuh, John H.; Williams, Ondre J.

1977-01-01

A group of students were matched on the basis of compatible birth order; another was matched on the basis of conflicting birth order. After a month's experience in a residence hall their compatibility was examined. Students with conflicting birth order were more compatible than those with the same birth order. (Author)

Do we know how to reconcile preservation of landscapes with adaptation of agriculture to climate change? A case-study in a hilly area in Southern Italy

NASA Astrophysics Data System (ADS)

Menenti, Massimo; Alfieri, Silvia; Basile, Angelo; Bonfante, Antonello; Monaco, Eugenia; Riccardi, Maria; De Lorenzi, Francesca

2013-04-01

Limited impacts of climate change on agricultural yields are unlikely to induce any significant changes in current landscapes. Larger impacts, unacceptable on economic or social ground, are likely to trigger interventions towards adaptation of agricultural production systems by reducing or removing vulnerabilities to climate variability and change. Such interventions may require a transition to a different production system, i.e. complete substitution of current crops, or displacement of current crops at their current location towards other locations, e.g. at higher elevations within the landscape. We have assessed the impacts of climate change and evaluated options for adaptation of a valley in Southern Italy, dominated by vine and olive orchards with a significant presence of wheat. We have first estimated the climatic requirements of several varieties for each dominant species. Next, to identify options for adaptation we have evaluated the compatibility of such requirements with indicators of a reference (current) climate and of future climate. This climate - compatibility assessment was done for each soil unit within the valley, leading to maps of locations where each crop is expected to be compatible with climate. This leads to identify both potential crop substitutions within the entire valley and crop displacements from one location to another within the valley. Two climate scenarios were considered: reference (1961-90) and future (2021-2050) climate, the former from climatic statistics, and the latter from statistical downscaling of general circulation models (AOGCM). Climatic data consists of daily time series of maximum and minimum temperature, and daily rainfall on a grid with a spatial resolution of 35 km. We evaluated the adaptive capacity of the "Valle Telesina" (Campania Region, Southern Italy). A mechanistic model of water flow in the soil-plant-atmosphere system (SWAP) was used to describe the hydrological conditions in response to climate for each soil unit. Crop-specific input data and model parameters were estimated on the basis of local experiments and of scientific literature and assumed to be generically representative of the species. Time series of MODIS TIR data were used to downscale gridded climate data on air temperature for both the reference and the future climate. The results indicate that no complete crop substitution will be required within this time frame, i.e. the Valle Telesina will preserve its typical landscape features of a vine - olive orchards dominated production system, typical of many regions in Mediterranean Europe. On the other hand very significant crop displacements will be necessary to grow each variety under optimal hydrothermal conditions, from the point of view of both quantity and quality of yield. The work was carried out within the Italian national project AGROSCENARI funded by the Ministry for Agricultural, Food and Forest Policies (MIPAAF, D.M. 8608/7303/2008)

Compatible taper and volume equations for young longleaf pine plantations in southwest Georgia

Treesearch

Lichun Jiang; John R. Brooks; Alexander Clark

2010-01-01

Inside and outside bark taper equations as well as compatible cubic foot volume equations were developed from felled tree data selected from young longleaf pine plantations that are part of an existing growth and yield study located in the Flint River drainage of southwest Georgia. A Max-Burkhart taper model was selected as the basic model form due to the accuracy...

Modification of polymers by polymeric additives

NASA Astrophysics Data System (ADS)

Nesterov, A. E.; Lebedev, E. V.

1989-08-01

The conditions for the thermodynamic compatibility of polymers and methods for its enhancement are examined. The study of the influence of various factors on the concentration-temperature limits of compatibility, dispersion stabilisation processes, and methods for the improvement of adhesion between phases in mixtures of thermodynamically incompatible polymers is described. Questions concerning the improvement of the physicomechanical characteristics of polymer dispersions are considered. The bibliography includes 200 references.

Assessing a Couple's Relationship and Compatibility Using the MARI[R] Card Test and Mandala Drawings

ERIC Educational Resources Information Center

Frame, Phyllis G.

2006-01-01

This paper illustrates the use of the MARI[R] Card Test, a transpersonal assessment tool which includes archetypal designs and color choices, as well as the drawing of a white and black mandala, or circle picture, for assessing the compatibility of two people in a committed relationship. In an informal pilot research study, 22 couples were given…

Advanced Alarm Systems: Revision of Guidance and Its Technical Basis

DTIC Science & Technology

2000-11-01

was required to generalize from the unique aspects of individual experiments and studies to actual applications in the workplace . This is because...types of equipment used). For example , laboratory experiments often do not involve tasks of the complexity of NPP operations, and most experiments do...Cognitive Compatibility, Situation Awareness, Task Compatibility, and Timeliness. Figure 3.3 Example of an alarm system design review guideline Each

Compatibility of Niobium Alloys and Superalloys in a Flowing He-Xe Power Conversion System

NASA Technical Reports Server (NTRS)

Bowman, Cheryl L.; Ritzert, Frank J.; Smialek, James L.; Jaster, Mark L.; rker, Samuel P.

2004-01-01

Proposed concepts for an ambitious mission to explore Jupiter's three icy moons place significant demands on the various spacecraft systems. There are many challenges related to the high output power conversion systems being considered, and one example is the need to ensure system compatibility at all levels. The utilization of appropriate materials for component structures is important to ensuring long mission life. Refractory metal alloys have attractive high-temperature properties in inert environments, but these alloys are sometimes susceptible to contamination. Potential material compatibility issues exist between refractory metal candidates and more conventional alloys. Nb-1Zr has long been considered one of the most well characterized refractory alloys that is well suited for elevated-temperature use and liquid-metal compatibility. However, previous studies have suggested that niobium alloys can not co-exist in a closed system with traditional stainless steels or superalloys due to transport of contaminants. The relevance of this information to a proposed power conversion system is discussed. Also, experiments and fundamental calculations are being performed to determine contamination transport from candidate superalloys to Nb-1Zr in a closed system with an inert carrier gas. Potential protective schemes are explored to ensure system level compatibility between the refractory alloy Nb-1Zr and a nickel-based superalloy.

Breeding system variation in 10 evening primroses (Oenothera sections Anogra and Kleinia; Onagraceae).

PubMed

Theiss, Kathryn E; Holsinger, Kent E; Evans, Margaret E K

2010-06-01

We examined two accounts of the relationship between breeding system and life history variation in a clade of evening primroses (Oenothera, Onagraceae): (1) selection for reproductive assurance should generate an association between self-compatibility and monocarpy and (2) phylogenetic conservatism leads to retention of breeding system and life history traits among closely related taxa. • We performed over 4000 hand pollinations under greenhouse conditions to determine the compatibility of 10 Oenothera taxa (sections Anogra [17 taxa] and Kleinia [2 taxa)] for which breeding systems had not previously been reported. We used generalized linear mixed models to evaluate the influence of pollination treatment, parents, and population on fruiting success. • Among the taxa tested, six were self-incompatible, two were variable in compatibility, and two were self-compatible. We combined these data with published studies in Anogra and Kleinia and mapped breeding system and life history onto a published phylogeny. • We found no evidence for phylogenetic conservatism, but detected considerable evolutionary lability in both traits. Additionally, we found no evidence for a consistent relationship between breeding system and life history. Only eight of 19 taxa followed the predicted association between self-incompatibility and polycarpy vs. self-compatibility and monocarpy. Instead, many taxa have retained self-incompatibility, regardless of monocarpy or polycarpy.

Pathotype profile of Xanthomonas oryzae pv. oryzae isolates from North Sumatera

NASA Astrophysics Data System (ADS)

Noer, Z.; Hasanuddin; Lisnawita; Suryanto, D.

2018-02-01

The Bacterial blight disease caused by Xanthomonas oryzae pv. oryzae (Xoo) is one of the most important diseases and has caused crop failure in rice crops. This pathogen infects the leaves in all plant growth phases. The purpose of this study is to investigation 10 Xoo isolates pathotype obtained from North Sumatra based on their interactions with 10 near-isogenic rice lines (NIL) of IRRI. The results showed that there are 6 pathotypes of virulence in North Sumatra, they are; pathotype I with incompatible interaction to all Xa genes, pathotype II with compatible interaction to Xa1 and Xa3 genes, while it has incompatible interaction to other genes, pathotype III with compatible interaction to Xa1, Xa5, Xa7, Xa8, Xa10 and Xa11 genes, but it has incompatible interaction to other genes, pathotype IV with compatible interaction to all Xa genes, pathotype V with compatible interaction to Xa1 gene and incompatible interaction to other genes, and pathotype VI with compatible interaction to Xa3 gene and incompatible interaction to other genes. Based on the resistant genes in each individual Xa2, Xa4, and Xa21 genes are the combination of Xa genes which are most suitable for use in the development of rice cultivars in North Sumatra.

Response-specifying cue for action interferes with perception of feature-sharing stimuli.

PubMed

Nishimura, Akio; Yokosawa, Kazuhiko

2010-06-01

Perceiving a visual stimulus is more difficult when a to-be-executed action is compatible with that stimulus, which is known as blindness to response-compatible stimuli. The present study explored how the factors constituting the action event (i.e., response-specifying cue, response intention, and response feature) affect the occurrence of this blindness effect. The response-specifying cue varied along the horizontal and vertical dimensions, while the response buttons were arranged diagonally. Participants responded based on one dimension randomly determined in a trial-by-trial manner. The response intention varied along a single dimension, whereas the response location and the response-specifying cue varied within both vertical and horizontal dimensions simultaneously. Moreover, the compatibility between the visual stimulus and the response location and the compatibility between that stimulus and the response-specifying cue was separately determined. The blindness effect emerged exclusively based on the feature correspondence between the response-specifying cue of the action task and the visual target of the perceptual task. The size of this stimulus-stimulus (S-S) blindness effect did not differ significantly across conditions, showing no effect of response intention and response location. This finding emphasizes the effect of stimulus factors, rather than response factors, of the action event as a source of the blindness to response-compatible stimuli.

The Powdery Mildew Disease of Arabidopsis: A Paradigm for the Interaction between Plants and Biotrophic Fungi

PubMed Central

Micali, Cristina; Göllner, Katharina; Humphry, Matt; Consonni, Chiara; Panstruga, Ralph

2008-01-01

The powdery mildew diseases, caused by fungal species of the Erysiphales, have an important economic impact on a variety of plant species and have driven basic and applied research efforts in the field of phytopathology for many years. Although the first taxonomic reports on the Erysiphales date back to the 1850's, advances into the molecular biology of these fungal species have been hampered by their obligate biotrophic nature and difficulties associated with their cultivation and genetic manipulation in the laboratory. The discovery in the 1990's of a few species of powdery mildew fungi that cause disease on Arabidopsis has opened a new chapter in this research field. The great advantages of working with a model plant species have translated into remarkable progress in our understanding of these complex pathogens and their interaction with the plant host. Herein we summarize advances in the study of Arabidopsis-powdery mildew interactions and discuss their implications for the general field of plant pathology. We provide an overview of the life cycle of the pathogens on Arabidopsis and describe the structural and functional changes that occur during infection in the host and fungus in compatible and incompatible interactions, with special emphasis on defense signaling, resistance pathways, and compatibility factors. Finally, we discuss the future of powdery mildew research in anticipation of the sequencing of multiple powdery mildew genomes. The cumulative body of knowledge on powdery mildews of Arabidopsis provides a valuable tool for the study and understanding of disease associated with many other obligate biotrophic pathogen species. PMID:22303240

Molecular cloning and characterization of Echinostoma caproni heat shock protein-70 and differential expression in the parasite derived from low- and high-compatible hosts.

PubMed

Higón, M; Monteagudo, C; Fried, B; Esteban, J G; Toledo, R; Marcilla, A

2008-10-01

We cloned and expressed Echinostoma caproni HSP70 in Escherichia coli. This molecule presents an open reading frame (ORF) of 655 amino acids, and a theoretical molecular weight of 71 kDa. E. caproni HSP70 protein showed a high homology to other helminth molecules, major differences being located in the C-terminal region of the molecule, with a hydrophobic portion. Studies of protein and messenger RNA (mRNA) expression revealed a distinct pattern, depending on the host (low- or high-compatible). Specific polyclonal antisera raised against the recombinant protein expressed in Escherichia coli demonstrated its selective presence in excretory/secretory products (ESP) of adult parasites obtained from high-compatible hosts. Immunological studies showed clearly the association of HSP70 with the parasite surface and other structures, including eggs.

The compatibility and stability of midazolam and dexamethasone in infusion solutions.

PubMed

Good, Phillip D; Schneider, Jennifer J; Ravenscroft, Peter J

2004-05-01

The delivery of subcutaneous medication by continuous infusion is common in palliative medicine. Many centers combine multiple medications, but the analytical confirmation of the compatibility and stability of these combinations has rarely been performed. This study examined the compatibility and stability of midazolam and dexamethasone using high performance liquid chromatography. Nine different solutions were prepared in polypropylene syringes by combining these two drugs with 0.9% sodium chloride. When these two drugs were combined in a syringe, there was significant loss of midazolam over 48 hours, with only 60-80% of the initial concentration remaining in syringes stored at 35-39 degrees C. This study demonstrates that cloudiness of a solution is not the only predictor of drug loss and that drug loss may occur even in solutions that remain clear at time of preparation. The clinical implications of these results are that dexamethasone and midazolam should not be combined in syringe driver solutions.

A Magnetic Resonance Compatible Soft Wearable Robotic Glove for Hand Rehabilitation and Brain Imaging.

PubMed

Hong Kai Yap; Kamaldin, Nazir; Jeong Hoon Lim; Nasrallah, Fatima A; Goh, James Cho Hong; Chen-Hua Yeow

2017-06-01

In this paper, we present the design, fabrication and evaluation of a soft wearable robotic glove, which can be used with functional Magnetic Resonance imaging (fMRI) during the hand rehabilitation and task specific training. The soft wearable robotic glove, called MR-Glove, consists of two major components: a) a set of soft pneumatic actuators and b) a glove. The soft pneumatic actuators, which are made of silicone elastomers, generate bending motion and actuate finger joints upon pressurization. The device is MR-compatible as it contains no ferromagnetic materials and operates pneumatically. Our results show that the device did not cause artifacts to fMRI images during hand rehabilitation and task-specific exercises. This study demonstrated the possibility of using fMRI and MR-compatible soft wearable robotic device to study brain activities and motor performances during hand rehabilitation, and to unravel the functional effects of rehabilitation robotics on brain stimulation.

In vitro studies of PBT Nonwoven Fabrics adsorbent for the removal of low density lipoprotein from hyperlipemia plasma

NASA Astrophysics Data System (ADS)

Cao, Ye; Wang, Hong; Yang, Chao; Zhong, Rui; Lei, Yu; Sun, Kang; Liu, Jiaxin

2011-06-01

Polyanion ligands such as acrylic acid (AA) and heparin were grafted on PBT Nonwoven Fabrics (PBTNF) to study their effect on the adsorption of low density lipoprotein (LDL). These modified PBTNFs were characterized by Horizontal Attenuated Total Reflectance Fourier Transform Infrared spectroscopy and X-ray Photoelectron spectroscopy. The blood compatibilities of the modified PBTNFs were examined using in vitro hemolysis rate (HR), platelet adhesion, total protein (TP) and activated partial thromboplastin time. The results showed that direct immobilized heparin could improve PBTNF-PAA's blood compatibility and decrease the adsorption capability of useful high density lipoprotein, but would possess so low bioactivity that could not further improve the absorption of LDL and TC. Since the PBTNF-PAA55-Heparin adsorbent had quite good adsorption selectivity for these proteins, it can be an excellent candidate for depletion of LDL with good blood compatibility.

Interactions Between Modality of Working Memory Load and Perceptual Load in Distractor Processing.

PubMed

Koshino, Hideya; Olid, Pilar

2015-01-01

The present study investigated interactions between working memory load and perceptual load. The load theory (Lavie, Hirst, de Fockert, & Viding, 2004 ) claims that perceptual load decreases distractor interference, whereas working memory load increases interference. However, recent studies showed that effects of working memory might depend on the relationship between modalities of working memory and task stimuli. Here, we examined whether the relationship between working memory load and perceptual load would remain the same across modalities. The results of Experiment 1 showed that verbal working memory load did not affect a compatibility effect for low perceptual load, whereas it increased the compatibility effect for high perceptual load. In Experiment 2, the compatibility effect remained the same regardless of visual working memory load. These results suggest that the effects of working memory load and perceptual load depend on the relationship between the modalities of working memory and stimuli.

Compatible above-ground biomass equations and carbon stock estimation for small diameter Turkish pine (Pinus brutia Ten.).

PubMed

Sakici, Oytun Emre; Kucuk, Omer; Ashraf, Muhammad Irfan

2018-04-15

Small trees and saplings are important for forest management, carbon stock estimation, ecological modeling, and fire management planning. Turkish pine (Pinus brutia Ten.) is a common coniferous species and comprises 25.1% of total forest area of Turkey. Turkish pine is also important due to its flammable fuel characteristics. In this study, compatible above-ground biomass equations were developed to predict needle, branch, stem wood, and above-ground total biomass, and carbon stock assessment was also described for Turkish pine which is smaller than 8 cm diameter at breast height or shorter than breast height. Compatible biomass equations are useful for biomass prediction of small diameter individuals of Turkish pine. These equations will also be helpful in determining fire behavior characteristics and calculating their carbon stock. Overall, present study will be useful for developing ecological models, forest management plans, silvicultural plans, and fire management plans.

Comparison of online reporting systems and their compatibility check with respective adverse drug reaction reporting forms

PubMed Central

Maharshi, Vikas; Nagar, Pravesh

2017-01-01

AIM: Different forms and online tools are available in different countries for spontaneous reporting, one of the most widely used methods of pharmacovigilance. Capturing sufficient information and adequate compatibility of online systems with respective reporting form is highly desirable for appropriate reporting of adverse drug reactions (ADRs). This study was aimed to compare three major online reporting systems (US, UK, and WHO) of the world and also to check their compatibility with the respective ADR reporting form. MATERIALS AND METHODS: A total of 89 data elements to provide relevant information were found out from above three online reporting systems. All three online systems were compared regarding magnitude of information captured by each of them and scoring was done by providing a score of “1” to each element. Compatibility of ADR reporting forms of India (Red form), US (Form 3500), and UK (Yellow card form) was assessed by comparing the information gathered by them with that can be entered into their respective online reporting systems, namely, “VigiFlow,” “US online reporting,” and “Yellow card online reporting.” Each unmatching item was given a score of “−1”. RESULTS: VigiFlow scored “74” points, whereas online reporting systems of the US and UK scored “56” and “49,” respectively, regarding magnitude of the information gathered by them. Compatibility score was found to be “0,” “−9,” and “−26” in case of ADR reporting systems of US, UK, and India, respectively. CONCLUSION: Our study reveals that “VigiFlow” is capable of capturing the maximum amount of information but “Form 3500” and “Online reporting system of US” are maximally compatible to each other among ADR reporting systems of all three countries. PMID:29515278

[Progress on studies of impact on CYP450 enzymes activity of traditional Chinese medicine by Cocktail probe substrates approach].

PubMed

Du, Xi; He, Xin; Huang, Yu-Hong; Li, Zi-Qiang

2016-12-01

Cocktail probe substrates approach is a fast, sensitive and high through put method to determine cytochrome P450 enzymes activity. It has been widely used to screen early drug development, analyze drug metabolism types and confirm the metabolism pathways, study drug-drug interactions, optimize clinical regimen, evaluate post marketing drugs and help liver/kidney pathological studies. This article reviewed characteristics of Cocktail probe substrates, focused on the application to traditional Chinese medicine to CYP450 system as follows: the metabolic pathway research of Chinese herb active ingredients; processing way and compatibility of medical herbs affect CYP450; find out the metabolic characteristic of Chinese patent medicine, study in pharmacy of national minority; do research in liver protective effect of traditional Chinese medicine and evaluate traditional Chinese medicine syndromes in animal models. This article make a summary of existing research results and also make a comparison of cocktail probe substrates approach application to western medicine and Chinese medicine. Copyright© by the Chinese Pharmaceutical Association.

Plastome-Genome Interactions Affect Plastid Transmission in Oenothera

PubMed Central

Chiu, W. L.; Sears, B. B.

1993-01-01

Plastids of Oenothera, the evening primrose, can be transmitted to the progeny from both parents. In a constant nuclear background, the frequency of biparental plastid transmission is determined by the types of plastid genomes (plastomes) involved in the crosses. In this study, the impact of nuclear genomes on plastid inheritance was analyzed. In general, the transmission efficiency of each plastome correlated strongly with its compatibility with the nuclear genome of the progeny, suggesting that plastome-genome interactions can influence plastid transmission by affecting the efficiency of plastid multiplication after fertilization. Lower frequencies of plastid transmission from the paternal side were observed when the pollen had poor vigor due to an incompatible plastome-genome combination, indicating that plastome-genome interactions may also affect the input of plastids at fertilization. Parental traits that affect the process of fertilization can also have an impact on plastid transmission. Crosses using maternal parents with long styles or pollen with relatively low growth capacity resulted in reduced frequencies of paternal plastid transmission. These observations suggest that degeneration of pollen plastids may occur as the time interval between pollination and fertilization is lengthened. PMID:8462856

Diesel production from lignocellulosic feed: the bioCRACK process

PubMed Central

Ritzberger, J.; Schwaiger, N.; Pucher, P.; Siebenhofer, M.

2017-01-01

The bioCRACK process is a promising technology for the production of second generation biofuels. During this process, biomass is pyrolized in vacuum gas oil and converted into gaseous, liquid and solid products. In cooperation with the Graz University of Technology, the liquid phase pyrolysis process was investigated by BDI – BioEnergy International AG at an industrial pilot plant, fully integrated in the OMV refinery in Vienna/Schwechat. The influence of various biogenous feedstocks and the influence of the temperature on the product distribution in the temperature range of 350°C to 390°C was studied. It was shown that the temperature has a major impact on the product formation. With rising temperature, the fraction of liquid products, namely liquid CHO-products, reaction water and hydrocarbons, increases and the fraction of biochar decreases. At 390°C, 39.8 wt% of biogenous carbon was transferred into a crude hydrocarbon fractions. The type of lignocellulosic feedstock has a minor impact on the process. The biomass liquefaction concept of the bioCRACK process was in pilot scale compatible with oil refinery processes. PMID:29291098

Pick-up and impact of flexible bodies

NASA Astrophysics Data System (ADS)

Singh, H.; Hanna, J. A.

2017-09-01

Picking up, laying down, colliding, rolling, and peeling are partial-contact interactions involving moving discontinuities. We examine the balances of momentum and energy across a moving discontinuity in a string, with allowance for injection or dissipation by singular supplies. We split the energy dissipation according to its invariance properties, discuss analogies with systems of particles and connections with the literature on shocks and phase transition fronts in various bodies, and derive a compatibility relation between supplies of momentum and translation-invariant energy. For a moving contact discontinuity between a string and a smooth rigid plane in the presence of gravity, we find a surprising asymmetry between the processes of picking up and laying down, such that steady-state kinks in geometry and associated jumps in tension are not admissible during pick-up. This prediction is consistent with experimental observations. We briefly discuss related problems including the falling folded chain, peeling of an adhesive tape, and the "chain fountain". Our approach is applicable to the study of impact and locomotion, and to systems such as moored floating structures and some musical instruments that feature vibrating string and cable elements interacting with a surface.

Impact of Motivational Pharmacotherapy on Treatment Retention among Depressed Latinos

PubMed Central

Lewis-Fernández, Roberto; Balán, Iván C.; Patel, Sapana R.; Sánchez-Lacay, J. Arturo; Alfonso, César; Gorritz, Magdaliz; Blanco, Carlos; Schmidt, Andrew; Jiang, Huiping; Schneier, Franklin; Moyers, Theresa B.

2015-01-01

Compared to non-Latino Whites, US racial/ethnic minority groups show higher non-adherence with outpatient antidepressant therapy, including lower retention, despite adjusting for sociodemographic and insurance covariates. Culturally salient concerns about antidepressants leading to ambivalence about treatment engagement may contribute to this discrepancy. To improve treatment adherence among depressed Latinos, we developed Motivational Pharmacotherapy, a novel approach that combines Motivational Interviewing, standard pharmacotherapy, and attention to Latino cultural concerns about antidepressants. This 12-week, open-trial, pre-post pilot study assessed the impact of Motivational Pharmacotherapy on antidepressant therapy retention, response (symptoms, functioning, and quality of life), and visit duration among N=50 first-generation Latino outpatients with Major Depressive Disorder. At study endpoint, 20% of patients discontinued treatment, with a mean therapy duration of 74.2 out of 84 days. Patients’ symptoms, psychosocial functioning, and quality of life improved significantly. Mean visit length was 36.7 minutes for visit 1 and 24.3 minutes for subsequent visits, compatible with use in community clinics. Responder and remitter rates were 82% and 68%. Compared to published Latino proportions of non-retention (32-53%) and previous studies at our clinic with similar samples and medications (36-46%), Motivational Pharmacotherapy appears to improve Latino retention in antidepressant therapy, and should be investigated further in controlled designs. PMID:23965261

The Associations Between Air Pollution and Adverse Pregnancy Outcomes in China.

PubMed

Tan, Yafei; Yang, Rong; Zhao, Jinzhu; Cao, Zhongqiang; Chen, Yawen; Zhang, Bin

2017-01-01

Research on the potential impact of air pollution on the human's health has increased rapidly in recent years. Several studies have suggested that exposure to air pollutants during period of pregnancy which is a crucial time point of mother-fetus development may have long-term and serious impact on adverse pregnancy outcomes. There is lack of review to evaluate the existed epidemiologic evidence on the associations between air pollutants and adverse pregnancy outcomes in China, so we conducted a review to explore the current epidemiological evidence on the effects of air pollutants to pregnancy outcomes and possible mechanisms during the pregnancy process. We used keywords to systematically search all the English and Chinese literatures on studies that were conducted in China. Exposure to air pollutants during pregnancy had shown there were harmful effects for different birth outcomes: preterm birth, low birth weight, stillbirth, birth defects, infertility, and macrosomia fetus. Results on the effects of air pollutants on adverse pregnancy outcomes are small and inconsistent because they vary in their design and methodology. The existed available evidence is compatible with either a small negative effect of air pollutants on pregnancy outcomes or with no effect; therefore, further studies are needed to confirm and quantify the possible associations and potential biologic mechanisms between air pollutants and pregnancy outcomes.

The Germanium Dichotomy in Martian Meteorites

NASA Technical Reports Server (NTRS)

Humayun, M.; Yang, S.; Righter, K.; Zanda, B.; Hewins, R. H.

2016-01-01

Germanium is a moderately volatile and siderophile element that follows silicon in its compatibility during partial melting of planetary mantles. Despite its obvious usefulness in planetary geochemistry germanium is not analyzed routinely, with there being only three prior studies reporting germanium abundances in Martian meteorites. The broad range (1-3 ppm) observed in Martian igneous rocks is in stark contrast to the narrow range of germanium observed in terrestrial basalts (1.5 plus or minus 0.1 ppm). The germanium data from these studies indicates that nakhlites contain 2-3 ppm germanium, while shergottites contain approximately 1 ppm germanium, a dichotomy with important implications for core formation models. There have been no reliable germanium abundances on chassignites. The ancient meteoritic breccia, NWA 7533 (and paired meteorites) contains numerous clasts, some pristine and some impact melt rocks, that are being studied individually. Because germanium is depleted in the Martian crust relative to chondritic impactors, it has proven useful as an indicator of meteoritic contamination of impact melt clasts in NWA 7533. The germanium/silicon ratio can be applied to minerals that might not partition nickel and iridium, like feldspars. We report germanium in minerals from the 3 known chassignites, 2 nakhlites and 5 shergottites by LAICP- MS using a method optimized for precise germanium analysis.

Achieving Land, Energy, and Environmental Compatibility: Utility-Scale Solar Energy Potential and Land-Use in California

NASA Astrophysics Data System (ADS)

Hoffacker, M. K.; Hernandez, R. R.; Field, C. B.

2013-12-01

Solar energy is an archetype renewable energy technology with great potential to reduce greenhouse gas emissions when substituted for carbon-intensive energy. Utility-scale solar energy (USSE; i.e., > 1 MW) necessitates large quantities of space making the efficient use of land for USSE development critical to realizing its full potential. However, studies elucidating the interaction between land-use and utility-scale solar energy (USSE) are limited. In this study, we assessed 1) the theoretical and technical potential of terrestrial-based USSE systems, and 2) land-use and land-cover change impacts from actual USSE installations (> 20 MW; planned, under construction, operating), using California as a case study due to its early adoption of renewable energy systems, unique constraints on land availability, immense energy demand, and vast natural resources. We used topo-climatic (e.g., slope, irradiance), infrastructural (e.g., proximity to transmission lines), and ecological constraints (e.g., threatened and endangered species) to determine highly favorable, favorable, and unfavorable locations for USSE and to assess its technical potential. We found that the theoretical potential of photovoltaic (PV) and concentrating solar power (CSP) in California is 26,097 and 29,422 kWh/m2/day, respectively. We identified over 150 planned, under construction, and operating USSE installations in California, ranging in size from 20 to 1,000 MW. Currently, 29% are located on shrub- and scrublands, 23% on cultivated crop land, 13% on pasture/hay areas, 11% on grassland/herbaceous and developed open space, and 7% in the built environment. Understanding current land-use decisions of USSE systems and assessing its future potential can be instructive for achieving land, energy, and environmental compatibility, especially for other global regions that share similar resource demands and limitations.

Implementation of Motivational Interviewing in Substance Use Disorder Treatment: Research Network Participation and Organizational Compatibility.

PubMed

Rieckmann, Traci R; Abraham, Amanda J; Bride, Brian E

Despite considerable empirical evidence that psychosocial interventions improve addiction treatment outcomes across populations, implementation remains problematic. A small body of research points to the importance of research network participation as a facilitator of implementation; however, studies examined limited numbers of evidence-based practices. To address this gap, the present study examined factors impacting implementation of motivational interviewing (MI). This study used data from a national sample of privately funded treatment programs (n = 345) and programs participating in the National Drug Abuse Treatment Clinical Trials Network (CTN) (n = 156). Data were collected via face-to-face interviews with program administrators and clinical directors (2007-2009). Analysis included bivariate t tests and chi-square tests to compare private and CTN programs, and multivariable logistic regression of MI implementation. A majority (68.0%) of treatment programs reported use of MI. Treatment programs participating in the CTN (88.9%) were significantly more likely to report use of MI compared with non-CTN programs (58.5%; P < 0.01). CTN programs (82.1%) also were more likely to use trainers from the Motivational Interviewing Network of Trainers as compared with private programs (56.1%; P < 0.05). Multivariable logistic regression models reveal that CTN-affiliated programs and programs with a psychiatrist on staff were more likely to use MI. Programs that used the Stages of Change Readiness and Treatment Eagerness Scale assessment tool were more likely to use MI, whereas programs placing greater emphasis on confrontational group therapy were less likely to use MI. Findings suggest the critical role of research network participation, access to psychiatrists, and organizational compatibility in adoption and sustained use of MI.

Spacelab, Spacehab, and Space Station Freedom payload interface projects

NASA Technical Reports Server (NTRS)

Smith, Dean Lance

1992-01-01

Contributions were made to several projects. Howard Nguyen was assisted in developing the Space Station RPS (Rack Power Supply). The RPS is a computer controlled power supply that helps test equipment used for experiments before the equipment is installed on Space Station Freedom. Ron Bennett of General Electric Government Services was assisted in the design and analysis of the Standard Interface Rack Controller hardware and software. An analysis was made of the GPIB (General Purpose Interface Bus), looking for any potential problems while transmitting data across the bus, such as the interaction of the bus controller with a data talker and its listeners. An analysis was made of GPIB bus communications in general, including any negative impact the bus may have on transmitting data back to Earth. A study was made of transmitting digital data back to Earth over a video channel. A report was written about the study and a revised version of the report will be submitted for publication. Work was started on the design of a PC/AT compatible circuit board that will combine digital data with a video signal. Another PC/AT compatible circuit board is being designed to recover the digital data from the video signal. A proposal was submitted to support the continued development of the interface boards after the author returns to Memphis State University in the fall. A study was also made of storing circuit board design software and data on the hard disk server of a LAN (Local Area Network) that connects several IBM style PCs. A report was written that makes several recommendations. A preliminary design review was started of the AIVS (Automatic Interface Verification System). The summer was over before any significant contribution could be made to this project.

A study of surface tension driven segregation in monotectic alloy systems

NASA Technical Reports Server (NTRS)

Andrews, J. Barry; Andrews, Rosalia N.; Gowens, Terrell F.

1988-01-01

The compatibilities of various monotectic alloy systems with several different crucible materials were evaluated. The study was carried out using small candidate alloy samples of compositions that produced fifty volume percent of each liquid phase at the monotectic temperature. Compatibility was based on the evaluation of the wetting tendency of the two immiscible phases with the crucible material in a one-g solidified sample. Three types of wetting phenomena were observed during the evaluation. Type 1 indicates an alloy-crucible combination where the L2 phase preferentially wets the crucible material. Since L2 is usually the minority phase in desirable alloys, this material combination would be difficult to process and is therefore considered incompatible. Type 2 behavior indicates an alloy-crucible combination where the L1 phase preferentially wets the crucible material. This type of combination is considered compatible since surface tension effects should aid in processing the alloy to a useful form. Type 3 indicates any combination that leads to major reactions between the alloy and crucible material, gas entrapment, or separation of the metal from the crucible wall. Additional compatibility evaluations would have to be carried out on combinations of this category. The five alloy systems studied included aluminum-bismuth, copper-lead, aluminum-indium, aluminum-lead and cadmium-gallium. The systems were combined with crucibles of alumina, boron nitride, mullite, quartz, silicon carbide and zirconia.

Moment-based metrics for global sensitivity analysis of hydrological systems

NASA Astrophysics Data System (ADS)

Dell'Oca, Aronne; Riva, Monica; Guadagnini, Alberto

2017-12-01

We propose new metrics to assist global sensitivity analysis, GSA, of hydrological and Earth systems. Our approach allows assessing the impact of uncertain parameters on main features of the probability density function, pdf, of a target model output, y. These include the expected value of y, the spread around the mean and the degree of symmetry and tailedness of the pdf of y. Since reliable assessment of higher-order statistical moments can be computationally demanding, we couple our GSA approach with a surrogate model, approximating the full model response at a reduced computational cost. Here, we consider the generalized polynomial chaos expansion (gPCE), other model reduction techniques being fully compatible with our theoretical framework. We demonstrate our approach through three test cases, including an analytical benchmark, a simplified scenario mimicking pumping in a coastal aquifer and a laboratory-scale conservative transport experiment. Our results allow ascertaining which parameters can impact some moments of the model output pdf while being uninfluential to others. We also investigate the error associated with the evaluation of our sensitivity metrics by replacing the original system model through a gPCE. Our results indicate that the construction of a surrogate model with increasing level of accuracy might be required depending on the statistical moment considered in the GSA. The approach is fully compatible with (and can assist the development of) analysis techniques employed in the context of reduction of model complexity, model calibration, design of experiment, uncertainty quantification and risk assessment.

Physical Compatibility of Micafungin With Sodium Bicarbonate Hydration Fluids Commonly Used With High-Dose Methotrexate Chemotherapy.

PubMed

Joiner, Logan C; Tynes, Clay; Arnold, John; Miller, Rachel R; Gorman, Greg

2018-04-01

Purpose: The purpose of this study was to determine the physical compatibility of micafungin with commonly used concentrations of sodium bicarbonate hydration fluids administered via a Y-site connected to a central venous catheter (Y-site/CVC). Methods: Micafungin sodium (evaluated concentration of 1.5 mg/mL) was combined in a 3:1 (vehicle:drug) ratio with the following commonly used hydration vehicles: 40 mEq/L sodium bicarbonate in 5% dextrose in water with ¼ normal saline (40SB-D5W-1/4NS), 75 mEq/L sodium bicarbonate in D5W (75SB-D5W), and 154 mEq/L sodium bicarbonate in D5W (154SB-D5W). A 3:1 ratio was used based on the flow rates (typically 125 mL/m 2 /h for bicarbonate-containing vehicles and 50 mL/h for micafungin) of the corresponding solutions in a clinical setting. Visual observations recorded to determine physical compatibility included visual inspection against different backgrounds (unaided, black, and white). Other physical observations were as follows: odor, evolution of gas, pH, and turbidity immediately recorded after mixing and at specified time points up to 2 hours. Evaluations at each time point were compared against baseline observation values at Time 0. Results: All combinations tested were found to be compatible up to 2 hours. Time points beyond 2 hours cannot be safely verified as compatible. Conclusion: Micafungin may be administered safely using a Y-site/CVC delivery system with all the vehicles tested in this study.

Comparative Analysis of Compatibility Effects on Invigorating Blood Circulation for Cyperi Rhizoma Series of Herb Pairs Using Untargeted Metabolomics

PubMed Central

Liu, Pei; Shang, Er-Xin; Zhu, Yue; Yu, Jin-Gao; Qian, Da-Wei; Duan, Jin-Ao

2017-01-01

The mutual-assistance compatibility of Cyperi Rhizoma (Xiangfu, XF) and Angelicae Sinensis Radix (Danggui, DG), Chuanxiong Rhizoma (Chuanxiong, CX), Paeoniae Radix Alba (Baishao, BS), or Corydalis Rhizoma (Yanhusuo, YH), found in a traditional Chinese medicine (TCM) named Xiang-Fu-Si-Wu Decoction (XFSWD), can produce synergistic and promoting blood effects. Nowadays, XFSWD has been proved to be effective in activating blood circulation and dissipating blood stasis. However, the role of the herb pairs synergistic effects in the formula were poorly understood. In order to quantitatively assess the compatibility effects of herb pairs, mass spectrometry-based untargeted metabolomics studies were performed. The plasma and urine metabolic profiles of acute blood stasis rats induced by adrenaline hydrochloride and ice water and administered with Cyperi Rhizoma—Angelicae Sinensis Radix (XD), Cyperi Rhizoma—Chuanxiong Rhizoma (XC), Cyperi Rhizoma—Paeoniae Radix Alba (XB), Cyperi Rhizoma—Corydalis Rhizoma (XY) were compared. Relative peak area of identified metabolites was calculated and principal component analysis (PCA) score plot from the potential markers was used to visualize the overall differences. Then, the metabolites results were used with biochemistry indicators and genes expression values as parameters to quantitatively evaluate the compatibility effects of XF series of herb pairs by PCA and correlation analysis. The collective results indicated that the four XF herb pairs regulated glycerophospholipid metabolism, steroid hormone biosynthesis and arachidonic acid metabolism pathway. XD was more prominent in regulating the blood stasis during the four XF herb pairs. This study demonstrated that metabolomics was a useful tool to efficacy evaluation and compatibility effects of TCM elucidation. PMID:29018346

The personification of animals: coding of human and nonhuman body parts based on posture and function.

PubMed

Welsh, Timothy N; McDougall, Laura; Paulson, Stephanie

2014-09-01

The purpose of the present research was to determine how humans represent the bodies and limbs of nonhuman mammals based on anatomical and functional properties. To this end, participants completed a series of body-part compatibility tasks in which they responded with a thumb or foot response to the color of a stimulus (red or blue, respectively) presented on different limbs of several animals. Across the studies, this compatibility task was conducted with images of human and nonhuman animals (bears, cows, and monkeys) in bipedal or quadrupedal postures. The results revealed that the coding of the limbs of nonhuman animals is strongly influenced by the posture of the body, but not the functional capacity of the limb. Specifically, body-part compatibility effects were present for both human and nonhuman animals when the figures were in a bipedal posture, but were not present when the animals were in a quadrupedal stance (Experiments 1a-c). Experiments 2a and 2b revealed that the posture-based body-part compatibility effects were not simply a vertical spatial compatibility effect or due to a mismatch between the posture of the body in the image and the participant. These data indicate that nonhuman animals in a bipedal posture are coded with respect to the "human" body representation, whereas nonhuman animals in a quadrupedal posture are not mapped to the human body representation. Overall, these studies provide new insight into the processes through which humans understand, mimic, and learn from the actions of nonhuman animals. Copyright © 2014 Elsevier B.V. All rights reserved.

Clinical evaluation of the endothelial tie-2 crossmatch in ABO compatible and ABO incompatible renal transplants.

PubMed

Kafetzi, Maria L; Boletis, John N; Melexopoulou, Christine A; Tsakris, Athanassios; Iniotaki, Aliki G; Doxiadis, Ilias I N

2013-11-01

The necessity of detection of other than the classical major histocompatibility complex (MHC) and MHC class I-related chain A (MICA) directed antibodies prior to organ transplantation has already been repeatedly reported. A commercial flow cytometric endothelial crossmatch (CM) using isolated peripheral blood tie-2 positive cells provides a tool to detect non-MHC antibodies in addition to antibodies directed to MHC class I and II. The vast majority of circulating tie-2 positive cells expresses HLA-DR but not the A, B blood group antigens. Tie-2 cells are circulating surrogate endothelial cells. In this retrospective study we evaluated the endothelial CM in 51 renal transplantations, 30 with ABO compatible grafts and 21 with ABO incompatible grafts. Fifteen of the ABO compatible recipients (group A) developed unexplained rejection episodes (RE) while the remaining 15 had no RE (group B). Five cases of group A and none of group B had a positive tie-2 CM before transplantation (p=0.042). A positive tie-2 CM was also correlated with graft failure in ABO compatible transplants (p=0.02). No significant correlation was found between a positive pre-transplant tie-2 CM and RE in the ABO incompatible group. This study strongly suggest that a positive tie-2 CM may predict post-transplantation complications in ABO compatible grafts while negative reactions are not predictive. The test is not significantly correlated with RE in ABO incompatible grafts possibly due to applied desensitization. Copyright © 2013 American Society for Histocompatibility and Immunogenetics. Published by Elsevier Inc. All rights reserved.

Examining ABO compatible donors in double lung transplants during the era of lung allocation score.

PubMed

Taghavi, Sharven; Jayarajan, Senthil N; Furuya, Yuka; Komaroff, Eugene; Shiose, Akira; Leotta, Eros; Hisamoto, Kazuhiro; Patel, Namrata; Cordova, Francis; Criner, Gerard; Guy, T Sloane; Toyoda, Yoshiya

2014-10-01

The short-term and long-term effect of using ABO compatible donors in the era of lung allocation score is unknown. This study determined if carefully selected ABO compatible donors could be used in double lung transplantation (DLT) with good outcomes. The United Network for Organ Sharing database was retrospectively reviewed for adult DLT from May 2005 to December 2011. Of 6,655 double lung transplants, 493 (7.4%) were with ABO compatible donors and 6,162 (92.6%) were with ABO identical donors. In multivariate analysis, use of ABO compatible donors was not associated with mortality at 30 days (HR, 1.16; 95% CI, 0.76 to 1.79, p = 0.49), 1 year (HR, 1.10; 95% CI, 0.86 to 1.42, p = 0.46), and 5 years (HR, 1.06; 95% CI, 0.83 to 1.34, p = 0.65). Variables associated with mortality at 5 years were donor female sex, donor age 60 years or greater, prolonged ischemic time, increasing recipient creatinine, recipient age, race mismatch, and mechanical ventilation or extracorporeal membrane oxygenation as a bridge to transplantation. Length of stay was longer in the ABO compatible group (30.9 vs 25.9 days, p = 0.001). Acute rejection episodes on index hospitalization (8.8 vs. 8.9%, p = 1.00), peak posttransplant forced expiratory volume in 1 second (FEV1) (82.7 vs 79.7%, p = 0.053), and decrement in FEV1 over time were not different (p = 0.13). Freedom from bronchiolitis obliterans syndrome was similar (1,475 vs 1,454 days, p = 0.17). The use of ABO compatible donors in the era of lung allocation score was not associated with short-term or long-term mortality and resulted in equivalent posttransplant lung function. A DLT with carefully selected ABO compatible donors can result in excellent outcomes. Copyright © 2014 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Genetic compatibility, mate choice and patterns of parentage: invited review.

PubMed

Tregenza, T; Wedell, N

2000-08-01

There is growing interest in the possibility that genetic compatibility may drive mate choice, including gamete choice, particularly from the perspective of understanding why females frequently mate with more than one male. Mate choice for compatibility differs from other forms of choice for genetic benefits (such as 'good genes') because individuals are expected to differ in their mate preferences, changing the evolutionary dynamics of sexual selection. Recent experiments designed to investigate genetic benefits of polyandry suggest that mate choice on the basis of genetic compatibility may be widespread. However, in most systems the mechanisms responsible for variation in compatibility are unknown. We review potential sources of variation in genetic compatibility and whether there is any evidence for mate choice driven by these factors. Selfish genetic elements appear to have the potential to drive mate compatibility mate choice, though as yet there is only one convincing example. There is abundant evidence for assortative mating between populations in hybrid zones, but very few examples where this is clearly a result of selection against mating with genetically less compatible individuals. There are also numerous cases of inbreeding avoidance, but little evidence that mate choice or differential fertilization success driven by genetic compatibility occurs between unrelated individuals. The exceptions to this are a handful of situations where both the alleles causing incompatibility and the alleles involved in mate choice are located in a chromosome region where recombination is suppressed. As yet there are only a few potential sources of genetic compatibility which have clearly been shown to drive mate choice. This may reflect limitations in the potential for the evolution of mate choice for genetic compatibility within populations, although the most promising sources of such incompatibilities have received relatively little research.

Mutual interferences and design principles for mechatronic devices in magnetic resonance imaging.

PubMed

Yu, Ningbo; Gassert, Roger; Riener, Robert

2011-07-01

Robotic and mechatronic devices that work compatibly with magnetic resonance imaging (MRI) are applied in diagnostic MRI, image-guided surgery, neurorehabilitation and neuroscience. MRI-compatible mechatronic systems must address the challenges imposed by the scanner's electromagnetic fields. We have developed objective quantitative evaluation criteria for device characteristics needed to formulate design guidelines that ensure MRI-compatibility based on safety, device functionality and image quality. The mutual interferences between an MRI system and mechatronic devices working in its vicinity are modeled and tested. For each interference, the involved components are listed, and a numerical measure for "MRI-compatibility" is proposed. These interferences are categorized into an MRI-compatibility matrix, with each element representing possible interactions between one part of the mechatronic system and one component of the electromagnetic fields. Based on this formulation, design principles for MRI-compatible mechatronic systems are proposed. Furthermore, test methods are developed to examine whether a mechatronic device indeed works without interferences within an MRI system. Finally, the proposed MRI-compatibility criteria and design guidelines have been applied to an actual design process that has been validated by the test procedures. Objective and quantitative MRI-compatibility measures for mechatronic and robotic devices have been established. Applying the proposed design principles, potential problems in safety, device functionality and image quality can be considered in the design phase to ensure that the mechatronic system will fulfill the MRI-compatibility criteria. New guidelines and test procedures for MRI instrument compatibility provide a rational basis for design and evaluation of mechatronic devices in various MRI applications. Designers can apply these criteria and use the tests, so that MRI-compatibility results can accrue to build an experiential database.

Impact of packet losses in scalable 3D holoscopic video coding

NASA Astrophysics Data System (ADS)

Conti, Caroline; Nunes, Paulo; Ducla Soares, Luís.

2014-05-01

Holoscopic imaging became a prospective glassless 3D technology to provide more natural 3D viewing experiences to the end user. Additionally, holoscopic systems also allow new post-production degrees of freedom, such as controlling the plane of focus or the viewing angle presented to the user. However, to successfully introduce this technology into the consumer market, a display scalable coding approach is essential to achieve backward compatibility with legacy 2D and 3D displays. Moreover, to effectively transmit 3D holoscopic content over error-prone networks, e.g., wireless networks or the Internet, error resilience techniques are required to mitigate the impact of data impairments in the user quality perception. Therefore, it is essential to deeply understand the impact of packet losses in terms of decoding video quality for the specific case of 3D holoscopic content, notably when a scalable approach is used. In this context, this paper studies the impact of packet losses when using a three-layer display scalable 3D holoscopic video coding architecture previously proposed, where each layer represents a different level of display scalability (i.e., L0 - 2D, L1 - stereo or multiview, and L2 - full 3D holoscopic). For this, a simple error concealment algorithm is used, which makes use of inter-layer redundancy between multiview and 3D holoscopic content and the inherent correlation of the 3D holoscopic content to estimate lost data. Furthermore, a study of the influence of 2D views generation parameters used in lower layers on the performance of the used error concealment algorithm is also presented.

Threats posed by artisanal fisheries to the reproduction of coastal fish species in a Mediterranean marine protected area

NASA Astrophysics Data System (ADS)

Lloret, J.; Muñoz, M.; Casadevall, M.

2012-11-01

Artisanal fisheries are frequently considered as a sustainable activity compatible with the conservation objectives of marine protected areas (MPAs). Few studies have examined the impacts of these fisheries on the reproductive potential of exploited fish species within the marine reserves. This study evaluated the potential impact of artisanal fishing on the reproduction of coastal fish species in a Mediterranean MPA through onboard sampling from January 2008 to December 2010. Eleven sex-changing fish species constituted an important part of the catch (20% overall and up to 60% of the total gill net catch) and, in five of them, most individuals were of one sex. Artisanal fishing can negatively affect the sustainability of those coastal fishes showing sex reversal, particularly the protogynous ones such as Diplodus cervinus and Epinephelus marginatus, as well as the species with complex mating systems (e.g. some sparids, labrids and scorpaenids). In all species the average size for the individuals captured was above the minimum landing size (where this exists), but in four species (Conger conger, Diplodus puntazzo, Sphyraena spp. and Sparus aurata) it was below the size of first maturity (L50). Results show that sex and size selection by artisanal fishing not only can have an impact on the reproduction of coastal fish species but may also be exacerbating rather than reducing the impact of fishing on coastal resources. Thus, new management actions need to be urgently implemented in the MPAs where artisanal fisheries are allowed to operate in order to protect the reproductive potential of these species, particularly those showing a complicated reproductive strategy.

The impact of an efficient collection sites location on the zoning phase in municipal solid waste management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghiani, Gianpaolo, E-mail: gianpaolo.ghiani@unisalento.it; Manni, Andrea, E-mail: andrea.manni@unisalento.it; Manni, Emanuele, E-mail: emanuele.manni@unisalento.it

2014-11-15

Highlights: • We study the problems of locating collection areas and zoning the service territory in a municipal waste management system. • We investigate the impact that an efficient collection sites location has on the subsequent zoning phase. • On a real-world test case, we show that the proposed approach could allow achieving significant monetary savings. - Abstract: In this paper, we study two decisional problems arising when planning the collection of solid waste, namely the location of collection sites (together with bin allocation) and the zoning of the service territory, and we assess the potential impact that an efficientmore » location has on the subsequent zoning phase. We first propose both an exact and a heuristic approach to locate the unsorted waste collection bins in a residential town, and to decide the capacities and characteristics of the bins to be located at each collection site. A peculiar aspect we consider is that of taking into account the compatibility between the different types of bins when allocating them to collection areas. Moreover, we propose a fast and effective heuristic approach to identify homogeneous zones that can be served by a single collection vehicle. Computational results on data related to a real-life instance show that an efficient location is fundamental in achieving consistent monetary savings, as well as a reduced environmental impact. These reductions are the result of one vehicle less needed to perform the waste collection operations, and an overall traveled distance reduced by about 25% on the average.« less

Planning for sustainable tourism in southern Pulau Banggi: an assessment of biophysical conditions and their implications for future tourism development.

PubMed

Teh, Lydia; Cabanban, Annadel S

2007-12-01

A priori assessments of a site's biophysical and socio-economic capacity for accommodating tourism are less common than tourism impact studies. A priori evaluations can provide a contextual understanding of ecological, economic and socio-cultural forces, which shape the prospects for sustainable tourism development at the host destination, and can avert adverse impacts of tourism. We conduct an a priori assessment of the biophysical environment of Pulau Banggi, in the Malaysian state of Sabah for sustainable tourism development. We characterise baseline conditions of the island's marine biodiversity, seasonality, and infrastructure. We then evaluate how existing biophysical conditions will influence options for sustainable tourism development. In particular, we suggest conditions, if there are any, which constitute a limit to future tourism development in terms of compatibility for recreation and resilience to visitor impacts. We find that the biggest constraint is the lack of adequate water and sanitation infrastructure. Blast fishing, although occurring less than once per hour, can potentially destroy the major attraction for tourists. We conclude that while Pulau Banggi possesses natural qualities that are attractive for ecotourism, financial and institutional support must be made available to provide facilities and services that will enable local participation in environmental protection and enhance prospects for future sustainable tourism.

Toward an operational tool to simulate green roof hydrological impact at the basin scale: a new version of the distributed rainfall-runoff model Multi-Hydro.

PubMed

Versini, Pierre-Antoine; Gires, Auguste; Tchinguirinskaia, Ioulia; Schertzer, Daniel

2016-10-01

Currently widespread in new urban projects, green roofs have shown a positive impact on urban runoff at the building scale: decrease and slow-down of the peak discharge, and decrease of runoff volume. The present work aims to study their possible impact at the catchment scale, more compatible with stormwater management issues. For this purpose, a specific module dedicated to simulating the hydrological behaviour of a green roof has been developed in the distributed rainfall-runoff model (Multi-Hydro). It has been applied on a French urban catchment where most of the building roofs are flat and assumed to accept the implementation of a green roof. Catchment responses to several rainfall events covering a wide range of meteorological situations have been simulated. The simulation results show green roofs can significantly reduce runoff volume and the magnitude of peak discharge (up to 80%) depending on the rainfall event and initial saturation of the substrate. Additional tests have been made to assess the susceptibility of this response regarding both spatial distributions of green roofs and precipitation. It appears that the total area of greened roofs is more important than their locations. On the other hand, peak discharge reduction seems to be clearly dependent on spatial distribution of precipitation.

Development of a Tool for Siting Low Impact Development in Urban Watersheds

NASA Astrophysics Data System (ADS)

Martin-Mikle, C.; de Beurs, K.; Julian, J.

2013-12-01

Low impact development (LID) -- a comprehensive land use planning and design approach with the goal of mitigating development impacts on hydrologic/nutrient cycles and ecosystems -- is increasingly being touted as an effective approach to lessen overland runoff and pollutant loadings. Examples of LIDs include riparian buffers, grassed swales, detention/retention ponds, rain gardens, green roofs and rain barrels. Broad-scale decision support tools for siting LIDs have been developed for agricultural watersheds, but are rare for urban watersheds, largely due to greater land use complexity and lack of necessary high-resolution geospatial data. Here, we develop a framework to assist city planners and water quality managers in siting LIDs in urban watersheds. One key component of this research is a framework accessible to those interested in using it. Hence, development of the framework has centered around 1) determining optimal data requirements for siting LID in an urban watershed and 2) developing a tool compatible with both open-source and commercial GIS software. We employ a wide variety of landscape metrics to evaluate the tool. A case study of the Lake Thunderbird Watershed, an urbanized watershed southeast of Oklahoma City, illustrates the effectiveness of a tool that is capable of siting LID in an urban watershed.

Central Cross-Talk in Task Switching : Evidence from Manipulating Input-Output Modality Compatibility

ERIC Educational Resources Information Center

Stephan, Denise Nadine; Koch, Iring

2010-01-01

Two experiments examined the role of compatibility of input and output (I-O) modality mappings in task switching. We define I-O modality compatibility in terms of similarity of stimulus modality and modality of response-related sensory consequences. Experiment 1 included switching between 2 compatible tasks (auditory-vocal vs. visual-manual) and…

Magnetic resonance-compatible robotic and mechatronics systems for image-guided interventions and rehabilitation: a review study.

PubMed

Tsekos, Nikolaos V; Khanicheh, Azadeh; Christoforou, Eftychios; Mavroidis, Constantinos

2007-01-01

The continuous technological progress of magnetic resonance imaging (MRI), as well as its widespread clinical use as a highly sensitive tool in diagnostics and advanced brain research, has brought a high demand for the development of magnetic resonance (MR)-compatible robotic/mechatronic systems. Revolutionary robots guided by real-time three-dimensional (3-D)-MRI allow reliable and precise minimally invasive interventions with relatively short recovery times. Dedicated robotic interfaces used in conjunction with fMRI allow neuroscientists to investigate the brain mechanisms of manipulation and motor learning, as well as to improve rehabilitation therapies. This paper gives an overview of the motivation, advantages, technical challenges, and existing prototypes for MR-compatible robotic/mechatronic devices.

Incentive compatibility and conflict resolution in international river basins: A case study of the Nile Basin

NASA Astrophysics Data System (ADS)

Wu, Xun; Whittington, Dale

2006-02-01

Nation-states rarely go to war over water, but it is equally rare that water conflicts in an international river basin are resolved through cooperation among the riparian countries that use the shared resources. Gains from cooperation will mean little to individual riparians unless the required cooperative behaviors are incentive compatible. Cooperative game theory offers useful insights for assessing cooperative solutions for water conflicts in international river basins. Applying cooperative game theory concepts such as core, nucleolus, and Shapley value to Nile water conflicts, we examine the incentive structure of both cooperative and noncooperative strategies for different riparian countries and establish some baseline conditions for incentive-compatible cooperation in the Nile basin.

Perceived Compatibility and the Adoption of B2C E-Commerce by Non-buyers

NASA Astrophysics Data System (ADS)

Hernández-García, Ángel; Iglesias-Pradas, Santiago; Chaparro-Peláez, Julián; Pascual-Miguel, Félix

The purpose of this article is to study the factors which affect the intention to buy online for users who have never made any prior purchase using the electronic channel, with special focus to the role of perceived compatibility. To do so, an adoption model for e-commerce was proposed on the basis of the Technology Adoption Model (TAM) and the Innovations Diffusion Theory (IDT). In order to validate the model, data gathered amongst Spanish consumers who had no experience using e-commerce, were analyzed using the partial least squares (PLS) method. The results have demonstrated the importance of perceived compatibility as a significant factor to foster non-buyers' adoption of electronic business-to-consumer e-commerce (eB2C).

[Magnetic resonance compatibility research for coronary mental stents].

PubMed

Wang, Ying; Liu, Li; Wang, Shuo; Shang, Ruyao; Wang, Chunren

2015-01-01

The objective of this article is to research magnetic resonance compatibility for coronary mental stents, and to evaluate the magnetic resonance compatibility based on laboratory testing results. Coronary stents magnetic resonance compatibility test includes magnetically induced displacement force test, magnetically induced torque test, radio frequency induced heating and evaluation of MR image. By magnetic displacement force and torque values, temperature, and image distortion values to determine metal coronary stent demagnetization effect. The methods can be applied to test magnetic resonance compatibility for coronary mental stents and evaluate its demagnetization effect.

Outcomes and Impact of Training and Development in Health Management and Leadership in Relation to Competence in Role: A Mixed-Methods Systematic Review Protocol

PubMed Central

Ayeleke, Reuben Olugbenga; North, Nicola; Wallis, Katharine Ann; Liang, Zhanming; Dunham, Annette

2016-01-01

Background: The need for competence training and development in health management and leadership workforces has been emphasised. However, evidence of the outcomes and impact of such training and development has not been systematically assessed. The aim of this review is to synthesise the available evidence of the outcomes and impact of training and development in relation to the competence of health management and leadership workforces. This is with a view to enhancing the development of evidence-informed programmes to improve competence. Methods and Analysis: A systematic review will be undertaken using a mixed-methods research synthesis to identify, assess and synthesise relevant empirical studies. We will search relevant electronic databases and other sources for eligible studies. The eligibility of studies for inclusion will be assessed independently by two review authors. Similarly, the methodological quality of the included studies will be assessed independently by two review authors using appropriate validated instruments. Data from qualitative studies will be synthesised using thematic analysis. For quantitative studies, appropriate effect size estimate will be calculated for each of the interventions. Where studies are sufficiently similar, their findings will be combined in meta-analyses or meta-syntheses. Findings from quantitative syntheses will be converted into textual descriptions (qualitative themes) using Bayesian method. Textual descriptions and results of the initial qualitative syntheses that are mutually compatible will be combined in mixed-methods syntheses. Discussion: The outcome of data collection and analysis will lead, first, to a descriptive account of training and development programmes used to improve the competence of health management and leadership workforces and the acceptability of such programmes to participants. Secondly, the outcomes and impact of such programmes in relation to participants’ competence as well as individual and organisational performance will be identified. If possible, the relationship between health contexts and the interventions required to improve management and leadership competence will be examined PMID:28005551

The Neural Basis of Contextual Influences on Face Categorization

PubMed Central

Freeman, Jonathan B.; Ma, Yina; Barth, Maria; Young, Steven G.; Han, Shihui; Ambady, Nalini

2015-01-01

From only brief exposure to a face, individuals spontaneously categorize another's race. Recent behavioral evidence suggests that visual context may affect such categorizations. We used fMRI to examine the neural basis of contextual influences on the race categorization of faces. Participants categorized the race of faces that varied along a White-Asian morph continuum and were surrounded by American, neutral, or Chinese scene contexts. As expected, the context systematically influenced categorization responses and their efficiency (response times). Neuroimaging results indicated that the retrosplenial cortex (RSC) and orbitofrontal cortex (OFC) exhibited highly sensitive, graded responses to the compatibility of facial and contextual cues. These regions showed linearly increasing responses as a face became more White when in an American context, and linearly increasing responses as a face became more Asian when in a Chinese context. Further, RSC activity partially mediated the effect of this face-context compatibility on the efficiency of categorization responses. Together, the findings suggest a critical role of the RSC and OFC in driving contextual influences on face categorization, and highlight the impact of extraneous cues beyond the face in categorizing other people. PMID:24006403

Preparation, melting behavior and thermal stability of poly(lactic acid)/poly(propylene carbonate) blends processed by vane extruder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zou, Wei, E-mail: zw55624@163.com; Chen, Rongyuan; Zhang, Haichen

Poly (lactic acid) (PLA)/Poly (propylene carbonate) (PPC) blends were prepared by vane extruder which is a type of novel polymer processing extruder based on elongation force field. Scanning electron microscope (SEM), differential scanning calorimetry (DSC) and thermogravimetric (TG) were used respectively to analyze the compatibility, the melting behavior and thermal stability properties of PLA/PPC blends affected by the different content of PPC. The results showed that with the increase of the PPC content, the glass transition temperature of PLA was reduced, and the glass transition temperature of PPC was increased, which indicated that PLA and PPC had partial compatibility. Themore » cold crystallization temperature of PLA increased with the increase of the PPC content, which showed that PPC hindered the cold crystallization process of PLA. The addition of PPC had little impact on the melting process of PLA, and the melting temperature of PLA was almost kept the same value. Thermogravimetric analysis showed that the thermal stability of PPC was worse than that of PLA, the addition of PPC reduced the thermal stability of PLA.« less

Waste Generation Overview, Course 23263

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, Lewis Edward

This course, Waste Generation Overview Live (COURSE 23263), provides an overview of federal and state waste management regulations, as well as Los Alamos National Laboratory (LANL) policies and procedures for waste management operations. The course covers the activities involved in the cradle-to-grave waste management process and focuses on waste characterization, waste compatibility determinations and classification, and the storage requirements for temporary waste accumulation areas at LANL. When you have completed this course, you will be able to recognize federal, state, and LANL environmental requirements and their impact on waste operations; recognize the importance of the cradle-to-grave waste management process; identifymore » the roles and responsibilities of key LANL waste management personnel (e.g., Waste Generator, Waste Management Coordinator, Waste Stream Profile approver, and Waste Certification Official); characterize a waste stream to determine whether it meets the definition of a hazardous waste, as well as characterize the use and minimum requirements for use of acceptable knowledge (AK) for waste characterization and waste compatibility documentation requirements; and identify the requirements for setting up and managing temporary waste accumulation areas.« less

Design of molecular imprinted polymers compatible with aqueous environment.

PubMed

Piletska, Elena V; Guerreiro, Antonio R; Romero-Guerra, Maria; Chianella, Iva; Turner, Anthony P F; Piletsky, Sergey A

2008-01-21

The main problem of poor water compatibility of molecularly imprinted polymers (MIPs) was addressed in examples describing design of synthetic receptors with high affinity for drugs of abuse. An extensive potentiometric titration of 10 popular functional monomers and corresponding imprinted and blank polymers was conducted in order to evaluate the subtleties of functional groups ionisation under aqueous conditions. It was found that polymers prepared using 2-trifluoromethacrylic acid (TFMAA) in combination with toluene as porogen possess superior properties which make them suitable for effective template recognition in water. The potential impact of phase separation during polymerisation on formation of high quality imprints has been discussed. Three drugs of abuse such as cocaine, deoxyephedrine and methadone were used as template models in polymer preparation for the practical validation of obtained results. The polymer testing showed that synthesized molecularly imprinted polymers have high affinity and selectivity for corresponding templates in aqueous environment, with imprinting factors of 2.6 for cocaine and 1.4 for methadone and deoxyephedrine. Corresponding blank polymers were unable to differentiate between analytes, suggesting that imprinting phenomenon was responsible for the recognition properties.

Strong human leukocyte antigen matching effect in nonsensitized kidney recipients with high pretransplant soluble CD30.

PubMed

Süsal, Caner; Pelzl, Steffen; Opelz, Gerhard

2003-10-27

The influence of human leukocyte antigen (HLA) matching on graft survival is greater in patients with preformed lymphocytotoxic antibodies than in nonsensitized patients. Pretransplant serum soluble CD30 (sCD30) affects graft outcome independently of presensitization status. The impact of HLA compatibility on kidney transplant survival was analyzed in 3980 nonsensitized first cadaveric kidney recipients in relation to the pretransplant serum sCD30 content. Although HLA compatibility influenced graft outcome only marginally in nonsensitized recipients with low sCD30 (at 3 years: P=0.0095; at 5 years: P=0.1033), a strong HLA matching effect was observed in nonsensitized recipients with high sCD30 (at 3 years: P<0.0001; at 5 years: P=0.0001). Nonsensitized patients with high pretransplant sCD30 benefit from an HLA well-matched kidney. Patients should be tested for sCD30 while on the waiting list for a kidney transplant, and HLA well-matched kidneys should be allocated to patients with high sCD30.

OpenSimulator Interoperability with DRDC Simulation Tools: Compatibility Study

DTIC Science & Technology

2014-09-01

into two components: (1) backend data services consisting of user accounts, login service, assets, and inventory; and (2) the simulator server which...components are combined into a single OpenSimulator process. In grid mode, the two components are separated, placing the backend services into a ROBUST... mobile devices. Potential points of compatibility between Unity and OpenSimulator include: a Unity-based desktop computer OpenSimulator viewer; a

Assembly of DNA Architectures in a Non-Aqueous Solution

DTIC Science & Technology

2012-08-31

environment, where butanol was chosen for optical compatibility and thermal properties. The retention of DNA hierarchical structure and thermal stability...transitioned to a non-aqueous environment, where butanol was chosen for optical compatibility and thermal properties. The retention of DNA hierarchical...techniques were first validated using a more widely studied DNA system, genomic salmon sperm DNA (saDNA) [19]. The saDNA samples were reacted with two

Effects of Methyl Eugenol Feeding on Mating Compatibility of Asian Population of Bactrocera dorsalis (Diptera: Tephritidae) with African Population and with B. carambolae

PubMed Central

Haq, Ihsan ul; Vreysen, Marc J. B.; Schutze, Mark; Hendrichs, Jorge; Shelly, Todd

2016-01-01

Males of some species included in the Bactrocera dorsalis complex are strongly attracted to methyl eugenol (ME) (1,2-dimethoxy-4-(2-propenyl) benzene), a natural compound occurring in a variety of plant species. ME feeding of males of the B. dorsalis complex is known to enhance their mating competitiveness. Within B. dorsalis, recent studies show that Asian and African populations of B. dorsalis are sexually compatible, while populations of B. dorsalis and Bactrocera carambolae are relatively incompatible. The objectives of this study were to examine whether ME feeding by males affects mating compatibility between Asian and African populations of B. dorsalis and ME feeding reduces male mating incompatibility between B. dorsalis (Asian population) and B. carambolae. The data confirmed that Asian and African populations of B. dorsalis are sexually compatible for mating and showed that ME feeding only increased the number of matings. Though ME feeding also increased the number of matings of B. dorsalis (Asian population) and B. carambolae males but the sexual incompatibility between both species was not reduced by treatment with ME. These results conform to the efforts resolving the biological species limits among B. dorsalis complex and have implications for fruit fly control programs in fields and horticultural trade. PMID:26362991

Still states of bistable lattices, compatibility, and phase transition

NASA Astrophysics Data System (ADS)

Cherkaev, Andrej; Kouznetsov, Andrei; Panchenko, Alexander

2010-09-01

We study a two-dimensional triangular lattice made of bistable rods. Each rod has two equilibrium lengths, and thus its energy has two equal minima. A rod undergoes a phase transition when its elongation exceeds a critical value. The lattice is subject to a homogeneous strain and is periodic with a sufficiently large period. The effective strain of a periodic element is defined. After phase transitions, the lattice rods are in two different states and lattice strain is inhomogeneous, the Cauchy-Born rule is not applicable. We show that the lattice has a number of deformed still states that carry no stresses. These states densely cover a neutral region in the space of entries of effective strains. In this region, the minimal energy of the periodic lattice is asymptotically close to zero. When the period goes to infinity, the effective energy of such lattices has the “flat bottom” which we explicitly describe. The compatibility of the partially transited lattice is studied. We derive compatibility conditions for lattices and demonstrate a family of compatible lattices (strips) that densely covers the flat bottom region. Under an additional assumption of the small difference of two equilibrium lengths, we demonstrate that the still structures continuously vary with the effective strain and prove a linear dependence of the average strain on the concentration of transited rods.

Study of observed broad dielectric relaxation and compatibility of polysulfone - Polyvinylidenefluoride blends

NASA Astrophysics Data System (ADS)

Patel, Swarnim; Shrivas, Sandhya; Dubey, R. K.; Keller, J. M.

2018-05-01

Short circuit thermally stimulated depolarization current measurement techniques has been employed to investigate the dielectric relaxation behavior of PSF: PVDF blends. The samples taken were blends of composition PSF: PVDF:: 80:20; 85:15; 90:10 and 95:05 percent by weight. The thermograms were characterized by a high value of initial current, a low temperature peak around 75-80°C and a prominent broad peak in the temperature interval 130 to 160°C. The two polymers are found to form compatible blend in the studied composition range.

Detergent-compatible proteases: microbial production, properties, and stain removal analysis.

PubMed

Niyonzima, Francois Niyongabo; More, Sunil

2015-01-01

Proteases are one of the most important commercial enzymes used in various industrial domains such as detergent and leather industries. The alkaline proteases as well as other detergent-compatible enzymes such as lipases and amylases serve now as the key components in detergent formulations. They break down various stains during fabric washing. The search for detergent-compatible proteases with better properties is a continuous exercise. The current trend is to use detergent-compatible proteases that are stable over a wide temperature range. Although the proteases showing stability at elevated pH have the capacity to be used in detergent formulations, their usage can be significant if they are also stable and compatible with detergent and detergent ingredients, and also able to remove protein stains. Despite the existence of some reviews on alkaline proteases, there is no specification for the use of alkaline proteases as detergent additives. The present review describes the detergent-compatible proteases tested as detergent additives. An overview was provided for screening, optimization, purification, and properties of detergent compatible proteases, with an emphasis on the stability and compatibility of the alkaline proteases with the detergent and detergent compounds, as well as stain removal examination methods.

Using the time and motion method to study clinical work processes and workflow: methodological inconsistencies and a call for standardized research.

PubMed

Zheng, Kai; Guo, Michael H; Hanauer, David A

2011-01-01

To identify ways for improving the consistency of design, conduct, and results reporting of time and motion (T&M) research in health informatics. We analyzed the commonalities and divergences of empirical studies published 1990-2010 that have applied the T&M approach to examine the impact of health IT implementation on clinical work processes and workflow. The analysis led to the development of a suggested 'checklist' intended to help future T&M research produce compatible and comparable results. We call this checklist STAMP (Suggested Time And Motion Procedures). STAMP outlines a minimum set of 29 data/ information elements organized into eight key areas, plus three supplemental elements contained in an 'Ancillary Data' area, that researchers may consider collecting and reporting in their future T&M endeavors. T&M is generally regarded as the most reliable approach for assessing the impact of health IT implementation on clinical work. However, there exist considerable inconsistencies in how previous T&M studies were conducted and/or how their results were reported, many of which do not seem necessary yet can have a significant impact on quality of research and generalisability of results. Therefore, we deem it is time to call for standards that can help improve the consistency of T&M research in health informatics. This study represents an initial attempt. We developed a suggested checklist to improve the methodological and results reporting consistency of T&M research, so that meaningful insights can be derived from across-study synthesis and health informatics, as a field, will be able to accumulate knowledge from these studies.

Compatible solute influence on nucleic acids: Many questions but few answers

PubMed Central

Kurz, Matthias

2008-01-01

Compatible solutes are small organic osmolytes including but not limited to sugars, polyols, amino acids, and their derivatives. They are compatible with cell metabolism even at molar concentrations. A variety of organisms synthesize or take up compatible solutes for adaptation to extreme environments. In addition to their protective action on whole cells, compatible solutes display significant effects on biomolecules in vitro. These include stabilization of native protein and nucleic acid structures. They are used as additives in polymerase chain reactions to increase product yield and specificity, but also in other nucleic acid and protein applications. Interactions of compatible solutes with nucleic acids and protein-nucleic acid complexes are much less understood than the corresponding interactions of compatible solutes with proteins. Although we may begin to understand solute/nucleic acid interactions there are only few answers to the many questions we have. I summarize here the current state of knowledge and discuss possible molecular mechanisms and thermodynamics. PMID:18522725

Ionospheric effects on DInSAR measurements of interseismic deformation in China

NASA Astrophysics Data System (ADS)

Gong, W.; Shan, X.; Song, X.; Liao, H.; Meyer, F. J.

2017-12-01

Interseismic deformation signals are small ground displacement that is critical to monitor the strain accumulates of major faults to foresee the potential seismic hazard. Accurate measurements of surface deformation could help recognize and interpret even subtle displacement and to give a better understanding of active fault behavior. However, the value and applicability of InSAR for inter-seismic monitoring problems is limited by the influence of temporal decorrelation and electromagnetic path delay variations (atmospheric disturbance), both reducing the sensitivity and accuracy of the technique. Ionospheric signal, a major part of atmospheric disturbance in InSAR, is related to the density of free electrons along the ray path, thus, that is dependent on the SAR signal frequency. Ionosphere induced phase distortions can lead to azimuth/range defocusing, geometry distortions and interferometric phase distortions. Some ionosphere phenomenon have been reported more severe at equatorial region and polar zones, e.g., ionosphere irregularity, while for middle latitude regions like West China it has not been thoroughly analyzed. Thus, this study is focus on the evaluation of ionosphere impacts in middle latitude zone, and its impacts in monitoring interseismic deformation in West China. The outcome would be useful to provide an empiric prior error condition of ionosphere disturbance, which can further benefit InSAR result interpretation and geophysical inversion, as well as the SAR data arrangement in future operational-(cloud) InSAR processing system. The study focus on two parts: 1. We will analyze the temporal-spatial variation of ionosphere and its magnitude at middle latitude zone, and investigate its impacts to current satellite SAR (C-band (Sentinel-1) and L-band (ALOS2) dataset) in earthquake-related deformation studies, especially inter-seismic study. 2. Ionosphere phase patterns at mid latitudes is typically small and the structure is compatibly smooth. This study will summarize the general spatial pattern of ionospheric phase at middle latitude zone and its impacts in fault displacement studies.

Space shuttle/food system study. Volume 2, Appendix A: Active heating system-screening analysis. Appendix B: Reconstituted food heating techniques analysis

NASA Technical Reports Server (NTRS)

1974-01-01

Technical data are presented which were used to evaluate active heating methods to be incorporated into the space shuttle food system design, and also to evaluate the relative merits and penalties associated with various approaches to the heating of rehydrated food during space flight. Equipment heating candidates were subject to a preliminary screening performed by a selection rationale process which considered the following parameters; (1) gravitational effect; (2) safety; (3) operability; (4) system compatibility; (5) serviceability; (6) crew acceptability; (7) crew time; (8) development risk; and (9) operating cost. A hot air oven, electrically heated food tray, and microwave oven were selected for further consideration and analysis. Passive, semi-active, and active food preparation approaches were also studied in an effort to determine the optimum method for heating rehydrated food. Potential complexity, cost, vehicle impact penalties, and palatability were considered in the analysis. A summary of the study results is provided along with cost estimates for each of the potential sytems

Reproductive choice in Islam: gender and state in Iran and Tunisia.

PubMed

Obermeyer, C M

1994-01-01

This report examines the extent to which reproductive choice is compatible with Islamic principles. It presents the argument that the impact of Islam on reproductive choice is largely a function of the political context in which gender issues are defined. Indicators of reproductive health in countries of the Middle East are reviewed and the way these relate to constraints on reproductive choice is assessed. The examples of Tunisia and Iran are used to illustrate the way in which Islam is invoked to legitimate conflicting positions concerning women and their reproductive options.

Orbit transfer rocket engine technology program: Oxygen materials compatibility testing

NASA Technical Reports Server (NTRS)

Schoenman, Leonard

1989-01-01

Particle impact and frictional heating tests of metals in high pressure oxygen, are conducted in support of the design of an advanced rocket engine oxygen turbopump. Materials having a wide range of thermodynamic properties including heat of combustion and thermal diffusivity were compared in their resistance to ignition and sustained burning. Copper, nickel and their alloys were found superior to iron based and stainless steel alloys. Some materials became more difficult to ignite as oxygen pressure was increased from 7 to 21 MPa (1000 to 3000 psia).

Impact of the Shortage of Major and Captain Civil Engineering Officers on the Base-Level Organization.

DTIC Science & Technology

1981-09-01

groups answer or perception about the corresponding question state- ment. Location-Determination Questions Questions used to find out what branches in the...Location I’ I.IL FOLD DOWN ON OUTSIDE -SEAL WITH TAPE AFIT/ LSH K IWRGTFTENI MON 4M4J NoI FIII OW)CIM. BUSINUS IF~ M.AILED FENALiT FOR PRIVATE USE ...Installation Compatible Use Zones (AICUZ) and is responsible for fish and wildlife manage- ment (10:14). The DEEV Section, the K-iEE Section and the DEEC Section

Electrospun Polymer Nanofibers Decorated with Noble Metal Nanoparticles for Chemical Sensing.

PubMed

Chen, Chen; Tang, Yongan; Vlahovic, Branislav; Yan, Fei

2017-12-01

The integration of different noble metal nanostructures, which exhibit desirable plasmonic and/or electrocatalytic properties, with electrospun polymer nanofibers, which display unique mechanical and thermodynamic properties, yields novel hybrid nanoscale systems of synergistic properties and functions. This review summarizes recent advances on how to incorporate noble metal nanoparticles into electrospun polymer nanofibers and illustrates how such integration paves the way towards chemical sensing applications with improved sensitivity, stability, flexibility, compatibility, and selectivity. It is expected that further development of this field will eventually make a wide impact on many areas of research.

Experimental contagious ecthyma in mule deer, white-tailed deer, pronghorn and wapiti.

PubMed

Lance, W R; Hibler, C P; DeMartini, J

1983-07-01

Hand-reared mule deer fawns (Odocoileus hemionus), white-tailed deer fawns (Odocoileus virginianus), pronghorn fawns (Antilocapra americana) and wapiti calves (Cervus elaphus nelsoni) were exposed to contagious ecthyma lesion material obtained from Rocky Mountain bighorn sheep (Ovis canadensis canadensis) to determine the susceptibility and pathogenesis in these species. All four species developed mucocutaneous proliferative lesions of the oral cavity, grossly and histologically compatible with contagious ecthyma. The limited clinical responses to the virus indicated that contagious ecthyma would not seriously impact free-ranging individuals.

Lignin carbon fiber: The path for quality

DOE PAGES

Yuan, Joshua S.; Li, Qiang; Ragauskas, Arthur J.

2017-03-01

Lignin represents an abundant biopolymer and a major waste from lignocellulosic processing plants, yet the utilization of lignin for fungible products remains one of the most challenging technical barriers for pulp mills and the modern biorefinery industry. In recent decades, lignin has been sought after as a precursor polymer for carbon fiber due to the high carbon content (up to 60%). Furthermore lignin carbon fiber is expected to be compatible with the market size of the pulp and paper industry and may have transformative impact on petroleum-based carbon fiber.